2762 files changed, 303453 insertions, 165453 deletions

diff --git a/ANNOUNCE.13_37 b/ANNOUNCE.13_37
deleted file mode 100644
index c066834d..00000000
--- a/ANNOUNCE.13_37
+++ /dev/null
@@ -1,215 +0,0 @@
-
-    Yes, it's that time again!  After many months of development and 
-careful testing, we are proud to announce the release of Slackware 
-version 13.37!
-
-    We are sure you'll enjoy the many improvements.  We've done our best 
-to bring the latest technology to Slackware while still maintaining the 
-stability and security that you have come to expect.  Slackware is well 
-known for its simplicity and the fact that we try to bring software to 
-you in the condition that the authors intended.
-
-    Slackware 13.37 brings many updates and enhancements, among which 
-you'll find two of the most advanced desktop environments available 
-today: Xfce 4.6.2, a fast and lightweight but visually appealing and 
-easy to use desktop environment, and KDE 4.5.5, a recent stable release 
-of the 4.5.x series of the award-winning KDE desktop environment.  
-We continue to make use of HAL (Hardware Abstraction Layer) and udev, 
-which allow the system administrator to grant use of various hardware 
-devices according to users' group membership so that they will be able 
-to use items such as USB flash sticks, USB cameras that appear like USB 
-storage, portable hard drives, CD and DVD media, MP3 players, and more, 
-all without requiring sudo, the mount or umount command.  Just plug and 
-play.  Properly set up, Slackware's desktop should be suitable for any 
-level of Linux experience.  New to the desktop framework are ConsoleKit 
-and PolicyKit.  ConsoleKit handles "seats", things like dealing with 
-devices when switching from one user to another.  PolicyKit is a system 
-for fine-grained access control, allowing a non-root user to run certain 
-tasks with elevated privilege, but more securely than if the entire task 
-were simply run as root.
-
-    Slackware uses the 2.6.37.6 kernel bringing you advanced performance 
-features such as journaling filesystems, SCSI and ATA RAID volume 
-support, SATA support, Software RAID, LVM (the Logical Volume Manager), 
-and encrypted filesystems.  Kernel support for X DRI (the Direct 
-Rendering Interface) brings high-speed hardware accelerated 3D graphics 
-to Linux.
-
-    There are two kinds of kernels in Slackware.  First there are the 
-huge kernels, which contain support for just about every driver in the 
-Linux kernel. These are primarily intended to be used for installation, 
-but there's no real reason that you couldn't continue to run them after 
-you have installed.  The other type of kernel is the generic kernel, in 
-which nearly every driver is built as a module.  To use a generic kernel 
-you'll need to build an initrd to load your filesystem module and 
-possibly your drive controller or other drivers needed at boot time, 
-configure LILO to load the initrd at boot, and reinstall LILO.  See the 
-docs in /boot after installing for more information.  Slackware's Linux 
-kernels come in both SMP and non-SMP types now.  The SMP kernel supports 
-multiple processors, multi-core CPUs, HyperThreading, and about every 
-other optimization available.  In our own testing this kernel has proven 
-to be fast, stable, and reliable.  We recommend using the SMP kernel 
-even on single processor machines if it will run on them.  Note that on
-x86_64 (64-bit), all the kernels are SMP capable.
-
-
-Here are some of the advanced features of Slackware 13.37:
-
-- Runs the 2.6.37.6 version of the Linux kernel from ftp.kernel.org.
-  Alternate 2.6.38.4 Linux kernels are also provided, as well as
-  suggested configurations for using a 2.6.39-rc4 kernel, or the
-  2.6.35.12 kernel which is supposed to be longterm supported.  These
-  kernels will provide reliable performance for your desktop or your
-  production server.  By the way, the Speakup driver, used to support
-  speech synthesizers providing access to Linux for the visually impaired
-  community, has now been merged into all of the provided kernels.
-
-- System binaries are linked with the GNU C Library, version 2.13.
-  This version of glibc also has excellent compatibility with
-  existing binaries.
-
-- X11 based on the X.Org Foundation's modular X Window System.
-  There's been much activity in the X development world, and the
-  improvements in terms of performance and hardware support are
-  too numerous to mention them all here.
-
-- Installs gcc-4.5.2 as the default C, C++, Objective-C, 
-  Fortran-77/95, and Ada 95 compiler.
-
-- Support for fully encrypted network connections with OpenSSL,
-  OpenSSH, OpenVPN, and GnuPG.
-
-- Apache (httpd) 2.2.17 web server with Dynamic Shared Object 
-  support, SSL, and PHP 5.3.6.
-
-- PCMCIA, CardBus, USB, FireWire and ACPI support.  This
-  makes Slackware a great operating system for your laptop.
-
-- The udev dynamic device management system for Linux 2.6.x.
-  This locates and configures most hardware automatically as it
-  is added (or removed) from the system, and creates the access
-  nodes in /dev.  It also loads the kernel modules required by
-  sound cards and other hardware at boot time.
-
-- New development tools, including Perl 5.12.3, Python 2.6.6,
-  Ruby 1.9.1-p431, Subversion 1.6.16, git-1.7.4.4, mercurial-1.8.2,
-  graphical tools like Qt designer and KDevelop, and much more.
-
-- Updated versions of the Slackware package management tools make it
-  easy to add, remove, upgrade, and make your own Slackware packages.
-  Package tracking makes it easy to upgrade from Slackware 13.1 to 
-  Slackware 13.37 (see UPGRADE.TXT and CHANGES_AND_HINTS.TXT).
-  The slackpkg tool can also help update from an older version of
-  Slackware to a newer one, and keep your Slackware system up to date.
-  In addition, the slacktrack utility will help you build and maintain
-  your own packages.
-
-- Web browsers galore!  Includes KDE's Konqueror 4.5.5, SeaMonkey 2.1b3
-  (this is the replacement for the Mozilla Suite), and the eagerly
-  anticipated update to Mozilla's immensely popular Firefox browser,
-  Firefox 4.0, as well as the Thunderbird 3.1.9 email and news client
-  with advanced junk mail filtering.
-
-- The KDE Software Compilation 4.5.5, a complete desktop environment.
-  This includes the KOffice productivity suite, networking tools, GUI
-  development with KDevelop, multimedia tools (including the amazing
-  Amarok music player and K3B disc burning software), the Konqueror web
-  browser and file manager, dozens of games and utilities,
-  international language support, and more.
-
-- A collection of GTK+ based applications including pidgin-2.7.11,
-   gimp-2.6.11, gkrellm-2.3.5, xchat-2.8.8, xsane-0.998, and pan-0.134.
-
-- A repository of extra software packages compiled and ready to run.
-  This includes the Java(TM) 2 Software Development Kit Standard
-  Edition, an MPlayer browser plugin, and more (see the /extra directory).
-  
-- Many more improved and upgraded packages than we can list here.  For
-  a complete list of core packages in Slackware 13.37, see this file:
-
-    ftp://ftp.slackware.com/pub/slackware/slackware-13.37/PACKAGES.TXT
-
-     
-Downloading Slackware 13.37:
----------------------------
-
-    The full version of Slackware Linux 13.37 is available for download 
-from the central Slackware FTP sites hosted by our friends at 
-www.cwo.com and osuosl.org:
-
-   ftp://slackware.osuosl.org/pub/slackware/slackware-13.37/
-   ftp://ftp.slackware.com/pub/slackware/slackware-13.37/
-
-If the sites are busy, see the list of official mirror sites here:
-
-   http://slackware.com/getslack/
-
-    We will be setting up BitTorrent downloads for the official ISO 
-images.  Stay tuned to http://slackware.com for the latest updates.
-
-    Instructions for burning the Slackware tree onto install discs may 
-be found in the isolinux directory.
-
-
-Purchasing Slackware on CD-ROM or DVD:
---------------------------------------
-
-    Or, please consider purchasing the Slackware Linux 13.37 six CD-ROM 
-set or deluxe dual-sided DVD release directly from Slackware Linux, and 
-you'll be helping to support the continued development of Slackware 
-Linux!
-
-    The DVD release has the 32-bit x86 Slackware 13.37 release on one 
-side, and the 64-bit x86_64 Slackware 13.37 release on the other.  Both 
-sides are bootable for easy installation, and includes everything from 
-both releases of Slackware 13.37, including the complete source code 
-trees.
-
-    The 6 CD-ROM release of Slackware 13.37 is the 32-bit x86 edition.  
-It includes a bootable first CD-ROM for easy installation.  The 6 
-CD-ROMs are labeled for easy reference.
-
-    The Slackware 13.37 x86 6 CD-ROM set is $49.95 plus shipping, or 
-choose the Slackware 13.37 x86/x86_64 dual-sided DVD (also $49.95 plus 
-shipping).
-
-    Slackware Linux is also available by subscription.  When we release 
-a new version of Slackware (which is normally once or twice a year) we 
-ship it to you and bill your credit card for a reduced subscription 
-price ($32.99 for the CD-ROM set, or $39.95 for the DVD) plus shipping.
-
-    For shipping options, see the Slackware store website.  Before 
-ordering express shipping, you may wish to check that we have the 
-product in stock. We make releases to the net at the same time as disc 
-production begins, so there is a lag between the online release and the 
-shipping of media. But, even if you download now you can still buy the 
-official media later. You'll feel good, be helping the project, and have 
-a great decorative item perfect for any computer room shelf.  :-)
-
-
-Ordering Information:
----------------------
-
-    You can order online at the Slackware Linux store:
-
-        http://store.slackware.com
-
-    Other Slackware items like t-shirts, caps, pins, and stickers can 
-also be found here.  These will help you find and identify yourself to 
-your fellow Slackware users.  Check out the new limited edition 1337
-black Slackware T-shirt with the classic logo on the front and a custom
-LILO boot screen on the back (with references to a few famous fictional
-computers!  :-)
-
-    Order inquiries (including questions about becoming a Slackware 
-reseller) may be directed to this address:  info@slackware.com
-   
-
-Have fun! :^)  I hope you find Slackware to be useful, and thanks
-very much for your support of this project over the years.
-
----
-Patrick J. Volkerding    <volkerdi@slackware.com>
-
-Visit us on the web at:  http://slackware.com
-
diff --git a/ANNOUNCE.14_0 b/ANNOUNCE.14_0
new file mode 100644
index 00000000..41d82074
--- /dev/null
+++ b/ANNOUNCE.14_0
@@ -0,0 +1,211 @@
+
+    Yes, it is that time again!  After well over a year of planning,
+development, and testing, the Slackware Linux Project is proud to
+announce the latest stable release of the longest running distribution
+of the Linux operating system, Slackware version 14.0! 
+
+    We are sure you'll enjoy the many improvements.  We've done our best 
+to bring the latest technology to Slackware while still maintaining the 
+stability and security that you have come to expect.  Slackware is well 
+known for its simplicity and the fact that we try to bring software to 
+you in the condition that the authors intended.
+
+    Slackware 14.0 brings many updates and enhancements, among which 
+you'll find two of the most advanced desktop environments available 
+today: Xfce 4.10.0, a fast and lightweight but visually appealing and 
+easy to use desktop environment, and KDE 4.8.5, a recent stable release 
+of the 4.8.x series of the award-winning KDE desktop environment.  
+These desktops utilize udev, udisks, and udisks2, and many of the
+specifications from freedesktop.org which allow the system administrator
+to grant use of various hardware devices according to users' group
+membership so that they will be able to use items such as USB flash
+sticks, USB cameras that appear like USB storage, portable hard drives,
+CD and DVD media, MP3 players, and more, all without requiring sudo, the
+mount or umount command.  Just plug and play.  Slackware's desktop
+should be suitable for any level of Linux experience.
+
+    Slackware uses the 3.2.29 kernel bringing you advanced performance 
+features such as journaling filesystems, SCSI and ATA RAID volume 
+support, SATA support, Software RAID, LVM (the Logical Volume Manager), 
+and encrypted filesystems.  Kernel support for X DRI (the Direct 
+Rendering Interface) brings high-speed hardware accelerated 3D graphics 
+to Linux.
+
+    There are two kinds of kernels in Slackware.  First there are the 
+huge kernels, which contain support for just about every driver in the 
+Linux kernel. These are primarily intended to be used for installation, 
+but there's no real reason that you couldn't continue to run them after 
+you have installed.  The other type of kernel is the generic kernel, in 
+which nearly every driver is built as a module.  To use a generic kernel 
+you'll need to build an initrd to load your filesystem module and 
+possibly your drive controller or other drivers needed at boot time, 
+configure LILO to load the initrd at boot, and reinstall LILO.  See the 
+docs in /boot after installing for more information.  Slackware's Linux 
+kernels come in both SMP and non-SMP types now.  The SMP kernel supports 
+multiple processors, multi-core CPUs, HyperThreading, and about every 
+other optimization available.  In our own testing this kernel has proven 
+to be fast, stable, and reliable.  We recommend using the SMP kernel 
+even on single processor machines if it will run on them.  Note that on
+x86_64 (64-bit), all the kernels are SMP capable.
+
+
+Here are some of the advanced features of Slackware 14.0:
+
+- Runs the 3.2.29 version of the Linux kernel from ftp.kernel.org.
+  The 3.2.x series is well-tested, offers good performance, and will be
+  getting long term support from kernel.org.  For people interested in
+  trying out newer kernels, we've provided sample configuration files
+  for Linux 3.4.11, 3.5.4, and 3.6-rc4 under the /testing directory.
+
+- System binaries are linked with the GNU C Library, version 2.15.
+  This version of glibc also has excellent compatibility with
+  existing binaries.
+
+- X11 based on the X.Org Foundation's modular X Window System.
+  This is X11R7.7, a new release, with many improvements in terms of
+  performance and hardware support.
+
+- Installs gcc-4.7.1 as the default C, C++, Objective-C, 
+  Fortran-77/95/2003/2008, and Ada 95/2005/2012 compiler.
+
+- Support for NetworkManager for simple configuration of wired and
+  wireless network connections, including mobile broadband, IPv6, VPN,
+  and more.  Roam seamlessly between known networks, and quickly set
+  up new connections.  We've retained full support for the traditional
+  Slackware networking scripts and for the wicd network manager,
+  offering choice and flexibility to all levels of users.
+
+- Support for fully encrypted network connections with OpenSSL,
+  OpenSSH, OpenVPN, and GnuPG.
+
+- Apache (httpd) 2.4.3 web server with Dynamic Shared Object 
+  support, SSL, and PHP 5.4.7.
+
+- USB, IEEE 1394 (FireWire), and ACPI support, as well as legacy PCMCIA
+  and Cardbus support.  This makes Slackware a great operating system
+  for your laptop.
+
+- The udev dynamic device management system for Linux 3.x.
+  This locates and configures most hardware automatically as it
+  is added (or removed) from the system, loading kernel modules
+  as needed.  It works along with the kernel's devtmpfs filesystem
+  to create access nodes in the /dev directory.
+
+- New development tools, including Perl 5.16.1, Python 2.7.3,
+  Ruby 1.9.3-p194, Subversion 1.7.6, git-1.7.12.1, mercurial-2.2.2,
+  graphical tools like Qt designer and KDevelop, and much more.
+
+- Updated versions of the Slackware package management tools make it
+  easy to add, remove, upgrade, and make your own Slackware packages.
+  Package tracking makes it easy to upgrade from Slackware 13.37 to 
+  Slackware 14.0 (see UPGRADE.TXT and CHANGES_AND_HINTS.TXT).
+  The slackpkg tool can also help update from an older version of
+  Slackware to a newer one, and keep your Slackware system up to date.
+  In addition, the slacktrack utility will help you build and maintain
+  your own packages.
+
+- Web browsers galore!  Includes KDE's Konqueror 4.8.5, SeaMonkey 2.12.1
+  (this is the replacement for the Mozilla Suite), Mozilla Firefox 15.0.1,
+  as well as the Thunderbird 15.0.1 email and news client with advanced
+  junk mail filtering.  A script is also available in /extra to repackage
+  Google Chrome as a native Slackware package.
+
+- The KDE Software Compilation 4.8.5, a complete desktop environment.
+  This includes the Calligra productivity suite (previously known as
+  KOffice), networking tools, GUI development with KDevelop, multimedia
+  tools (including the Amarok music player and K3B disc burning software),
+  the Konqueror web browser and file manager, dozens of games and utilities,
+  international language support, and more.
+
+- A collection of GTK+ based applications including pidgin-2.10.6,
+   gimp-2.8.2 (with many improvements including a single window mode),
+   gkrellm-2.3.5, xchat-2.8.8, xsane-0.998, and pan-0.139.
+
+- A repository of extra software packages compiled and ready to run
+  in the /extra directory.
+  
+- Many more improved and upgraded packages than we can list here.  For
+  a complete list of core packages in Slackware 14.0, see this file:
+
+    ftp://ftp.slackware.com/pub/slackware/slackware-14.0/PACKAGES.TXT
+
+     
+Downloading Slackware 14.0:
+---------------------------
+
+    The full version of Slackware Linux 14.0 is available for download 
+from the central Slackware FTP site hosted by our friends at osuosl.org:
+
+   ftp://ftp.slackware.com/pub/slackware/slackware-14.0/
+
+If the sites are busy, see the list of official mirror sites here:
+
+   http://mirrors.slackware.com
+
+    We will be setting up BitTorrent downloads for the official ISO 
+images.  Stay tuned to http://slackware.com for the latest updates.
+
+    Instructions for burning the Slackware tree onto install discs may 
+be found in the isolinux directory.
+
+
+Purchasing Slackware on CD-ROM or DVD:
+--------------------------------------
+
+    Or, please consider purchasing the Slackware Linux 14.0 six CD-ROM 
+set or deluxe dual-sided DVD release directly from Slackware Linux, and 
+you'll be helping to support the continued development of Slackware 
+Linux!
+
+    The DVD release has the 32-bit x86 Slackware 14.0 release on one 
+side, and the 64-bit x86_64 Slackware 14.0 release on the other.  Both 
+sides are bootable for easy installation, and includes everything from 
+both releases of Slackware 14.0, including the complete source code 
+trees.
+
+    The 6 CD-ROM release of Slackware 14.0 is the 32-bit x86 edition.  
+It includes a bootable first CD-ROM for easy installation.  The 6 
+CD-ROMs are labeled for easy reference.
+
+    The Slackware 14.0 x86 6 CD-ROM set is $49.95 plus shipping, or 
+choose the Slackware 14.0 x86/x86_64 dual-sided DVD (also $49.95 plus 
+shipping).
+
+    Slackware Linux is also available by subscription.  When we release 
+a new version of Slackware (which is normally once or twice a year) we 
+ship it to you and bill your credit card for a reduced subscription 
+price ($32.99 for the CD-ROM set, or $39.95 for the DVD) plus shipping.
+
+    For shipping options, see the Slackware store website.  Before 
+ordering express shipping, you may wish to check that we have the 
+product in stock. We make releases to the net at the same time as disc 
+production begins, so there is a lag between the online release and the 
+shipping of media. But, even if you download now you can still buy the 
+official media later. You'll feel good, be helping the project, and have 
+a great decorative item perfect for any computer room shelf.  :-)
+
+
+Ordering Information:
+---------------------
+
+    You can order online at the Slackware Linux store:
+
+        http://store.slackware.com
+
+    Other Slackware items like t-shirts, caps, pins, and stickers can 
+also be found here.  These will help you find and identify yourself to 
+your fellow Slackware users.  There are still some 1337 T-shirts left,
+and we'll also be unveiling a brand new T-shirt design soon for this new
+release.
+
+    Order inquiries (including questions about becoming a Slackware 
+reseller) may be directed to this address:  info@slackware.com
+
+Have fun! :^)  I hope you find Slackware to be useful, and thanks
+very much for your support of this project over the years.
+
+---
+Patrick J. Volkerding    <volkerdi@slackware.com>
+
+Visit us on the web at:  http://slackware.com
+
diff --git a/CHANGES_AND_HINTS.TXT b/CHANGES_AND_HINTS.TXT
index fdbf3c43..3c9f1f6c 100644
--- a/CHANGES_AND_HINTS.TXT
+++ b/CHANGES_AND_HINTS.TXT
@@ -1,106 +1,231 @@
-This file documents the instructions for upgrading to Slackware 13.37, the 

+This file documents the instructions for upgrading to Slackware 14.0, the 

 packages added, removed, renamed, and/or split during the development cycle 

-from Slackware 13.1 through 13.37, and some potential "gotchas" that users 

+from Slackware 13.37 through 14.0, and some potential "gotchas" that users 

 can avoid by arming themselves with a little knowledge.

 

 

-*** INSTRUCTIONS FOR UPGRADING FROM 13.1 ***

+*** INSTRUCTIONS FOR UPGRADING FROM 13.37 ***

 

 Follow the instructions detailed in the UPGRADE.TXT located in this

   directory.  

 

-Note that upgrading from a Slackware version earlier than 13.1 is NOT 

+Note that upgrading from a Slackware version earlier than 13.37 is NOT 

   supported at all and will most likely not work.

 

 

-*** PACKAGE ADDITIONS SINCE 13.1 ***

-

-a/btrfs-progs

-a/gdisk

-a/libcgroup

-a/lrzip

-a/mcelog

-a/util-linux (renamed from util-linux-ng)

-ap/ddrescue

-ap/lxc

-ap/moc

-d/slacktrack (moved from /extra)

-d/yasm (moved from /extra)

-kde/libktorrent

-l/gdk-pixbuf2

-l/libdbusmenu-qt

-l/libelf

-l/libmpc

-l/liboggz

-l/libpcap (split from tcpdump package)

-l/libplist

-l/libsndfile

-l/phonon-mplayer

-n/ca-certificates

-n/idnkit

-n/iptraf-ng (replaced iptraf)

-n/iwlwifi-100-ucode

-n/iwlwifi-6xxx-ucode

-n/rfkill

-x/radeon_ucode

-x/xdg-user-dirs

-x/xf86-video-nouveau

-xap/xaos

-

-extra/google-chrome/*

-/testing/ includes the following:

-  2.6.38.4 kernel

-  mesa-7.10.2

-  libdrm-2.4.25

-  xf86-video-nouveau-git_20110417_8378443

-

-

-*** PACKAGE REMOVALS SINCE 13.1 ***

-

-a/util-linux-ng (renamed to util-linux)

-kde/guidance-power-manager

-l/eggdbus

-n/iptraf (replaced by iptraf-ng)

-x/libXTrap

-x/libXprintAppUtil

-x/libXprintUtil

-x/libxkbui

-x/rstart

-x/trapproto

-x/xf86rushproto

-x/xfindproxy

-x/xfwp

-x/xplsprinters

-x/xprehashprinterlist

-x/xproxymanagementprotocol

-x/xsetmode

-x/xsetpointer

-x/xtrap

-extra/kde3-compat/

+*** PACKAGE ADDITIONS SINCE 13.37 ***

+

+a/gptfdisk

+a/kmod

+a/udisks

+a/udisks2

+a/upower

+ap/htop

+ap/soma

+d/gcc-go

+d/llvm

+kde/analitza

+kde/ark

+kde/blinken

+kde/bluedevil

+kde/calligra

+kde/cantor

+kde/filelight

+kde/gwenview

+kde/kaccessible

+kde/kactivities

+kde/kalgebra

+kde/kalzium

+kde/kamera

+kde/kanagram

+kde/kate

+kde/kbruch

+kde/kcalc

+kde/kcharselect

+kde/kcolorchooser

+kde/kde-baseapps

+kde/kde-runtime

+kde/kde-wallpapers

+kde/kde-workspace

+kde/kdegraphics-mobipocket

+kde/kdegraphics-strigi-analyzer

+kde/kdegraphics-thumbnailers

+kde/kdevelop-pg-qt

+kde/kdf

+kde/kfloppy

+kde/kgamma

+kde/kgeography

+kde/kgpg

+kde/khangman

+kde/kig

+kde/kiten

+kde/klettres

+kde/kmag

+kde/kmousetool

+kde/kmouth

+kde/kmplot

+kde/kolourpaint

+kde/konsole

+kde/korundum

+kde/kplayer

+kde/kremotecontrol

+kde/kruler

+kde/ksaneplugin

+kde/ksecrets

+kde/ksnapshot

+kde/kstars

+kde/ktimer

+kde/ktouch

+kde/kturtle

+kde/kwallet

+kde/kwebkitpart

+kde/kwordquiz

+kde/libkdcraw

+kde/libkdeedu

+kde/libkexiv2

+kde/libkipi

+kde/libksane

+kde/marble

+kde/networkmanagement

+kde/okular

+kde/oxygen-gtk2

+kde/parley

+kde/perlkde

+kde/perlqt

+kde/polkit-kde-agent-1

+kde/polkit-kde-kcmodules

+kde/printer-applet

+kde/pykde4

+kde/qtruby

+kde/quanta

+kde/rocs

+kde/smokegen

+kde/smokekde

+kde/smokeqt

+kde/step

+kde/superkaramba

+kde/svgpart

+kde/sweeper

+kde/wicd-kde

+kdei/calligra-l10n-*

+l/GConf

+l/db48

+l/gcr

+l/glade3

+l/glib-networking

+l/gnome-keyring

+l/gobject-introspection

+l/grantlee

+l/gsettings-desktop-schemas

+l/gtk+3

+l/gvfs

+l/herqq

+l/icu4c

+l/js185

+l/keybinder

+l/keyutils

+l/lcms2

+l/libatasmart

+l/libbluedevil

+l/libcanberra

+l/libcroco

+l/libffi

+l/libgnome-keyring

+l/libnl3

+l/libproxy

+l/libsoup

+l/libssh

+l/libtasn1

+l/libusb-compat

+l/libyaml

+l/media-player-info

+l/mozilla-nss

+l/phonon-gstreamer

+l/phonon-xine

+l/pycurl

+l/raptor2

+l/sg3_utils

+l/sound-theme-freedesktop

+n/ModemManager

+n/NetworkManager

+n/cifs-utils

+n/iftop

+n/mobile-broadband-provider-info

+n/nettle

+n/p11-kit

+x/freeglut

+x/libXaw3d

+x/libXcm

+x/mtdev

+x/transset

+x/xcb-util-image

+x/xcb-util-keysyms

+x/xcb-util-renderutil

+x/xcb-util-wm

+xap/network-manager-applet

+xfce/*

+

+

+*** PACKAGE REMOVALS SINCE 13.37 ***

+

+a/gdisk - renamed to gptfdisk

+a/module-init-tools - replaced by kmod

+ap/ntfsprogs - merged into ntfs-3g

+

+kde/kdeaccessibility      -\

+kde/kdebase                 \

+kde/kdebase-runtime          \

+kde/kdebase-workspace         | kde packages have been split up - notice all 

+kde/kdebindings               | of the new packages in the "Added" list...

+kde/kdeedu                   /

+kde/kdegraphics             /

+kde/kdeutils               /

+kde/konq-plugins          /

+kde/koffice              /

+kde/kopete-cryptography /

+kde/polkit-kde-1      -/

+

+l/hal-info - obsolete; replaced by various udev components

+l/hal - obsolete; replaced by upower, udisks, various others

+

+l/jre - removed due to licensing issues

+

+l/wv2 - no longer used by anything in Slackware

+

+l/raptor - no longer used (everything links raptor2 instead)

+

+n/rt2860-firmware -

+n/rt2870-firmware  \

+n/rt61-firmware     \

+n/rt71w-firmware     \

+n/iwlwifi-100-ucode   \

+n/iwlwifi-1000-ucode   \

+n/iwlwifi-3945-ucode    | all of these firmwares (except some *old* ones are

+n/iwlwifi-4965-ucode    | now included in the kernel-firmware package -- if 

+n/iwlwifi-5000-ucode    | you need an older firmware, use an older Slackware

+n/iwlwifi-5150-ucode   /

+n/iwlwifi-6000-ucode  /

+n/iwlwifi-6xxx-ucode /

+x/radeon_ucode  -----

+

+x/xf86-video-sisusb --\

+x/xf86-video-tseng     \

+x/xf86-video-xgi        | all of these are obsolete and/or will not

+x/xf86-video-radeonhd   | build with recent Xorg and/or toolchains

+x/scripts              /

+x/xaw3d  -------------/

+

+xap/thunar-volman -------\

+xap/xfce4-notifyd         \  all of these are moved to the new xfce/ set

+xap/xfce4-power-manager --/

+xap/xfce - removed (split into component packages)

+

+extra/ORBit2 - no longer needed by GConf

+extra/jdk - removed due to licensing issues

 

 

 *** OTHER NOTABLE CHANGES AND HINTS ***

 

-The Slackware installer uses udev to initialize your hardware, including the

-  network interface card(s).  This has positive consequences for network 

-  installations (using NFS, FTP, HTTP or SMB).  You no longer have to run the 

-  'pcmcia' and 'network' scripts prior to running 'setup' - the network 

-  interface will be created and intialized by udev.  If a DHCP server is 

-  found on your local network, the setup program will let you choose between 

-  automatic configuration of your network interface using DHCP or specifying 

-  a static IP address.  Using udev, the commandline for fully unattended 

-  configuration and startup of the dropbear SSH server has changed slightly. 

-  Suppose you want to boot the 'hugesmp' kernel, use DHCP for interface eth0,

-  and you have a us-english keyboard layout: the commandline to auto-start 

-  the SSH daemon in the installer would become: 

-      hugesmp.s kbd=us nic=auto:eth0:dhcp

-  Note: if you do not want to use udev, the "auto" keyword in that example 

-  commandline must be replaced with the actual name of the network module for 

-  your card.  If you do not want to use udev, you must add the parameter 

-  "noudev" to the command line that boots the Slackware installer, and the

-  original ("old") Slackware hardware configuration scripts will be used.

-  Also note that this is not supported...

-

 Use one of the provided generic kernels for daily use.  Do not report

   bugs until/unless you have reproduced them using one of the stock 

   generic kernels.  You will need to create an initrd in order to boot

@@ -117,13 +242,13 @@ Use one of the provided generic kernels for daily use.  Do not report
   ATI proprietary drivers) if you use the SMP kernel.

 

   If you decide to use one of the non-SMP kernels, you will need to follow the

-  instructions in /extra/linux-2.6.37.6-nosmp-sdk/README.TXT to modify your

+  instructions in /extra/linux-3.2.29-nosmp-sdk/README.TXT to modify your

   kernel sources for non-SMP usage.  Note that this only applies if you are

   using the Slackware-provided non-SMP kernel - if you build a custom kernel,

   the symlinks at /lib/modules/$(uname -r)/{build,source} will point to the

   correct kernel source so long as you don't (re)move it.

 

-As with 13.1, the system udev rules now reside in /lib/udev/rules.d/ instead

+As with 13.37, the system udev rules now reside in /lib/udev/rules.d/ instead

   of /etc/udev/rules.d/ in older versions.  There should never be a reason 

   to edit anything in /lib/udev/rules.d/, so if you think you have a case 

   where this is required, either you're wrong or it needs to be addressed in 

@@ -137,37 +262,26 @@ Speaking of udev, pay particular attention to 70-persistent-net.rules and
   70-persistent-cd.rules in /etc/udev/rules.d/ -- these two are automatically

   generated by the system.  If you remove, add, and/or replace some hardware

   (specifically network cards and/or optical drives) in a machine, you will

-  probably need to edit one or both of the rules files mentioned above.

-

-HP multifunction printer/scanners require that your user account be a member 

-  of the "lp" group for hp-toolbox to work properly, and to use the scanner

-  portion of some (all?) units, you'll need to be a member of the "lp" group.

-  This is because hplip's udev rules set the device with group "lp" ownership.

-

-HAL is not new anymore, but here are a few notes related to it:

-  1. User accounts with permission to mount removable devices and manipulate

-     bluetooth devices must be in at least the "plugdev" group.

-  2. User accounts with permission to do power-management tasks, such as 

-     suspend, hibernate, reboot, and shutdown, via HAL methods should be in

-     the "power" group.

-  3. User accounts with permission to use network devices, such as with the

-     wicd package in /extra, should be in the "netdev" group.

-  4. User accounts with permission to use devices that "dial out" or connect

-     over a serial port (serial console connections to plug computers, sync

-     with a palm device, etcetera) will need to be in the "dialout" group.

-  5. HAL will honor settings in /etc/fstab if a device is present there, so

-     you could technically have removable devices defined in /etc/fstab, but 

-     if the fstab settings do not allow normal users to mount them (with the

-     "user" or "users" option), then HAL/dbus will not allow them to be 

-     mounted either.  In other words, for example, if your fstab line for the

-     cdrom/dvd drive includes the "owner" option, you will not be able to 

-     mount it as a normal user.

-  6. If you find a need for modified fdi files, those should be placed in the

-     relevant directories in /etc/hal/fdi/ instead of /usr/share/hal/fdi/

-

-The version of Xorg in Slackware 13.37 will not (in most cases) require an 

-  /etc/X11/xorg.conf file.  Input hotplugging is no longer done using hal; 

-  instead, it now uses udev for input device detection and keyboard mapping.

+  probably need to edit one or both of the rules files mentioned above (or

+  just remove them and reboot to create new ones).

+

+If you are upgrading (as opposed to a new install), there are some stale files

+  in /etc/modprobe.d/ that you will need to remove:   blacklist.conf, 

+  bluetooth.conf, isapnp.conf, psmouse.conf, and usb-controller.conf

+  See /etc/modprobe.d/README for a more detailed explanation.

+

+Both printing and scanning require that your user account be a member of the 

+  "lp" group (membership in the "scanner" group is no longer needed by any

+  of the included scanner drivers, though some third party drivers may still

+  need it); we had to configure sane to use the "lp" group or else

+  multifunction devices (e.g. print/scan/copy units) would only do one or the

+  other (depending on whether the group ownership was "lp" or "scanner").

+

+Xorg no longer uses /etc/X11/xorg.conf by default (and in most cases, there

+  is absolutely no need for it).   You can still create an xorg.conf file if 

+  you wish, or you can create some minimal xorg.conf snippets with only the 

+  specific contents that you wish to override (as an example, to use a binary

+  video driver) as separate files in the /etc/X11/xorg.conf.d/ directory.

 

   /usr/share/X11/xorg.conf.d/ is the "packaged" configuration directory; all

   files ending with ".conf" in this directory are used by the X server 

@@ -191,11 +305,6 @@ The version of Xorg in Slackware 13.37 will not (in most cases) require an
   If you need to modify any of these defaults, then copy the relevant file

   from /usr/share/X11/xorg.conf.d/ to /etc/X11/xorg.conf.d/ and edit the

   copy.

- 

-  You can still create an xorg.conf file if you wish, or you can create some

-  minimal xorg.conf snippets with only the specific contents that you wish

-  to override (as an example, to use a binary-only video driver) as separate

-  files in the /etc/X11/xorg.conf.d/ directory.

 

   Regardless of your chipset (though it seems more common with intel), if KDE

   crashes on startup, try disabling the Composite extension (which will also

@@ -208,7 +317,7 @@ The version of Xorg in Slackware 13.37 will not (in most cases) require an
 Now that KMS (Kernel Mode Setting) for graphics cards has (mostly) stabilized,

   it is enabled by default for intel, ati, and nvidia graphics chipsets.  It

   is possible to disable it use "nomodeset" as a kernel append in lilo.conf,

-  but Xorg will not work at all on intel and ati chips if you do that.

+  but Xorg will not work at all on intel (and some ati) chips if you do that.

   

   If you want to change the resolution of the KMS console, that can be done

   with something like this as a kernel append in lilo.conf:

@@ -217,14 +326,26 @@ Now that KMS (Kernel Mode Setting) for graphics cards has (mostly) stabilized,
   Speaking of lilo.conf and KMS, make sure you use either vga=normal or 

   vga=extended -- some of the framebuffers don't like KMS very much...

 

-The (formerly) patented bytecode interpreter is now enabled in the freetype

-  package, so your fonts might look a bit different.  If this is undesirable,

-  you can restore the previous default with this line:

-   # ln -s ../conf.avail/10-autohint.conf /etc/fonts/conf.d/

+If your cd/dvd drive is not visible inside a gtk-based desktop environment

+  (e.g. Xfce), you may need to add "comment=x-gvfs-show" to the /etc/fstab 

+  line for the device.  For more information, see this document:

+  http://git.gnome.org/browse/gvfs/tree/monitor/udisks2/what-is-shown.txt

+

+If you see some log messages like this:

+    mdadm: sending ioctl 1261 to a partition!

+  They're completely harmless - do not be alarmed.  Here's why: 

+  http://lists.debian.org/debian-kernel/2012/03/msg00446.html

+

+The version of logrotate in Slackware 14.0 added an "su" option to define 

+  user/group for rotation.  Logrotate now skips directories which are world 

+  writable or writable by a group which is not "root" unless the "su" 

+  directive is used.  This has ramifications for third party packages that

+  installed e.g. /var/log/somedir owned by a non-root user and/or group.

 

 If you are using a KVM switch, you might experience problems with the mouse

   when switching from one system to another.  If so, you probably need to be

-  using the imps protocol for the psmouse driver, and that's a simple edit:

+  using the imps protocol for the psmouse driver, and that's a simple fix:

+  Copy /lib/modprobe.d/psmouse.conf to /etc/modprobe.d/psmouse.conf, then

   uncomment the following line in /etc/modprobe.d/psmouse.conf:

     #options psmouse proto=imps

   Next, unload and reload the psmouse module (do this as root):

diff --git a/ChangeLog.txt b/ChangeLog.txt
index adb32302..3aeaae10 100644
--- a/ChangeLog.txt
+++ b/ChangeLog.txt
@@ -1,2808 +1,3838 @@
-Mon Apr 25 13:37:00 UTC 2011
-Slackware 13.37 x86_64 stable is released!
+Wed Sep 26 01:10:42 UTC 2012
+Slackware 14.0 x86_64 stable is released!
 
-Thanks to everyone who pitched in on this release: the Slackware team,
-the folks producing upstream code, and linuxquestions.org for providing
-a great forum for collaboration and testing.
+We're perfectionists here at Slackware, so this release has been a long
+time a-brewing.  But we think you'll agree that it was worth the wait.
+Slackware 14.0 combines modern components, ease of use, and flexible
+configuration... our "KISS" philosophy demands it.
 
 The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a dual-sided
 32-bit/64-bit x86/x86_64 DVD.  Please consider supporting the Slackware
 project by picking up a copy from store.slackware.com.  We're taking
 pre-orders now, and offer a discount if you sign up for a subscription.
 
-As always, thanks to the Slackware community for testing, suggestions,
-and feedback.  :-)
+Thanks to everyone who helped make this happen.  The Slackware team, the
+upstream developers, and (of course) the awesome Slackware user community.
 
-Have fun!
-+--------------------------+
-Mon Apr 25 05:36:47 UTC 2011
-l/sdl-1.2.14-x86_64-5.txz:  Rebuilt.
-  Patched to fix a crash related to a changed struct in the Linux kernel.
-  Thanks to wadsworth.
-+--------------------------+
-Sun Apr 24 03:20:33 UTC 2011
-I'd best start wrapping this up or I'm likely to be eaten by a grue.
-a/sysvinit-scripts-1.2-noarch-43.txz:  Rebuilt.
-  The block loop device has long been built into the Slackware kernel (since
-  1993, in fact), but we plan to make it modular in future kernels in the main
-  tree, and it already is modular in the /testing kernels.  To avoid surprises,
-  we'll load it at boot time if it is modular and not loaded already.
-  /etc/rc.d/rc.loop:  Added a simple script to load the loop device module.
-  /etc/rc.d/rc.S:  Run the rc.loop script if it is executable.
-l/jre-6u25-x86_64-1.txz:  Upgraded.
-extra/fvwm-2.6.1/fvwm-2.6.1-x86_64-1.txz:  Added.
-  The location for the system config file moves to /etc, and there isn't one
-  included yet for fvwm-2.6.x.  But that makes it more fun, right?  :-)
-extra/jdk-6/jdk-6u25-x86_64-1.txz:  Upgraded.
+Have fun!  :-)
++--------------------------+
+Tue Sep 25 17:52:58 UTC 2012
+a/sysvinit-scripts-2.0-noarch-13.txz:  Rebuilt.
+  Changed the path in rc.M for wicd from relative to absolute.  It works
+  either way, but it should be an absolute path just to be consistent with
+  the rest of the script.
++--------------------------+
+Mon Sep 24 20:25:12 UTC 2012
+Here are a few minor bugfixes as well as a couple more test drivers for X:
+a/e2fsprogs-1.42.6-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+a/sysvinit-scripts-2.0-noarch-12.txz:  Rebuilt.
+  In rc.M, don't run rc.wicd if /usr/sbin/wicd does not exist.  This change
+  prevents a leftover rc.wicd from blocking NetworkManager startup.
+l/gamin-0.1.10-x86_64-5.txz:  Rebuilt.
+  Patched to fix a deadlock bug, and to fix building against recent libraries.
+  Thanks to sberthelot, sombragris, and ponce on LQ.
+l/mozilla-nss-3.13.5-x86_64-3.txz:  Rebuilt.
+  Added libcrmf.a to the package, needed to compile xulrunner.
+  Thanks to Robby Workman.
 isolinux/initrd.img:  Rebuilt.
+  Upgraded to e2fsprogs-1.42.6.
+testing/packages/xf86-video-intel-2.20.8-x86_64-1.txz:  Added.
+  This driver requires the libdrm in /testing.
+testing/packages/xf86-video-ati-6.14.6-x86_64-1.txz:  Added.
+  This driver requires the libdrm in /testing.
+testing/source/config-testing-3.*:  Rebuilt.
+  Changed CONFIG_GFS2_FS in huge kernels from y -> m to fix the compile.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-+--------------------------+
-Fri Apr 22 21:48:38 UTC 2011
-The sepulchral voice intones, "The cave is now closed."
-a/pkgtools-13.37-noarch-9.tgz:  Rebuilt.
-  Clear locale environment variables and then export LANG=C.
-  Thanks to guanx and rg3.
+  Upgraded to e2fsprogs-1.42.6.
++--------------------------+
+Sat Sep 22 00:34:26 UTC 2012
+I'll go along with the last minute request to provide the released stable
+version of xf86-video-nouveau.  The reason that we hadn't done this is that
+the stable version of Mesa won't compile with this version of libdrm.  But,
+since xf86-video-nouveau compiles fine with this libdrm and the Mesa we're
+already shipping, it seems reasonable to provide them here in /testing.
+Thanks to Didier Spaier.
+testing/packages/libdrm-2.4.39-x86_64-1.txz:  Added.
+testing/packages/xf86-video-nouveau-1.0.2-x86_64-1.txz:  Added.
++--------------------------+
+Wed Sep 19 23:52:16 UTC 2012
+Here we go one more time with Slackware 14.0 release candidate 5.
+Really, this time it is not a drill!  Everything is in place and
+ready to release at this point, and unless there's some kind of
+showstopper found (which doesn't seem too likely after all the
+testing that's happened), the release can be expected soon.
+After careful consideration and a considerable amount of internal
+testing I did relent to give the kernel one more bump to 3.2.29,
+so of course 3.2.30 was released a couple of hours ago.  ;-)
+But that's not a showstopper, and it seems to be time to get off
+the never-ending kernel upgrade treadmill until the next cycle
+begins.  Speaking of kernels, I added sample .configs for all the
+3.x kernel branches in /testing.  So test away, and if there are
+any new problems (or old ones that we missed), let us know soon!
+a/glibc-solibs-2.15-x86_64-7.txz:  Rebuilt.
+a/glibc-zoneinfo-2012f_2012f-noarch-7.txz:  Rebuilt.
+  Upgraded to tzcode2012f and tzdata2012f.
+a/kernel-generic-3.2.29-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.29-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.29-x86_64-1.txz:  Upgraded.
+a/patch-2.7-x86_64-2.txz:  Rebuilt.
+  Applied two upstream git commits to fix bugs which could cause target
+  files to be removed or truncated.  Thanks to Qun-Ying.
+d/git-1.7.12.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+d/kernel-headers-3.2.29-x86-1.txz:  Upgraded.
+d/slacktrack-2.12-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.  Thanks to Stuart Winter.
+d/subversion-1.7.6-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+k/kernel-source-3.2.29-noarch-1.txz:  Upgraded.
+l/glibc-2.15-x86_64-7.txz:  Rebuilt.
+l/glibc-i18n-2.15-x86_64-7.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-7.txz:  Rebuilt.
+n/samba-3.6.8-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+n/vsftpd-3.0.2-x86_64-1.txz:  Upgraded.
+  This update contains a seccomp sandbox policy fix which stops session
+  crashes when listing large directories logged in as a real local user.
+  Thanks to Martin.
 isolinux/initrd.img:  Rebuilt.
+  Upgraded to Linux kernel 3.2.29.
+kernels/*:  Upgraded.
+testing/source/config-testing-3.4.11/*:  Added.
+  Sample .config files for the 3.4.11 Linux kernel.
+testing/source/config-testing-3.5.4/*:  Added.
+  Sample .config files for the 3.5.4 Linux kernel.
+testing/packages/config-testing-3.6-rc4*:  Added.
+  Sample .config files for the 3.6-rc4 Linux kernel.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
+  Upgraded to Linux kernel 3.2.29.
++--------------------------+
+Fri Sep 14 20:29:40 UTC 2012
+n/dhcp-4.2.4_P2-x86_64-1.txz:  Upgraded.
+  An issue with the use of lease times was found and fixed.  Making certain
+  changes to the end time of an IPv6 lease could cause the server to abort.
+  Thanks to Glen Eustace of Massey University, New Zealand for finding this
+  issue.  [ISC-Bugs #30281]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3955
+  (* Security fix *)
+n/php-5.4.7-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
++--------------------------+
+Fri Sep 14 01:16:31 UTC 2012
+a/less-451-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.  (Seems more or less safe  ;-)
+a/patch-2.7-x86_64-1.txz:  Upgraded.
+  This version of patch ignores destination filenames that are absolute or
+  that contain a component of "..", unless such a filename is provided as
+  an argument.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4651
+  (* Security fix *)
+a/shadow-4.1.4.3-x86_64-7.txz:  Rebuilt.
+  Fixed adduser and login.defs to add or suggest group "scanner", which
+  might still be required by third party scanner drivers.
+  Thanks to Alex Baer.
+a/sysvinit-scripts-2.0-noarch-11.txz:  Rebuilt.
+  Edited rc.S to talk about the 3.x kernel in the udev comments.
+  Edited rc.M to run rc.udev in all cases again, not just when returning
+  from runlevel 1.  Even if udev is running already, the additional
+  trigger may be required in order to get some devices working.  The
+  comment that indicated it should only be run when returning from
+  runlevel 1 came from a time when the only purpose for rc.udev was to
+  start it if it wasn't running.  The behavior has changed since then, so
+  the comment has been fixed.  Guess I should have remembered the words of:
+    fortune -m Storer
+l/libsoup-2.38.1-x86_64-2.txz:  Rebuilt.
+  Added the .la files back, as it's not yet safe to eliminate them in this
+  package.  Thanks to Erik Hanson.
+n/bind-9.9.1_P3-x86_64-1.txz:  Upgraded.
+  This update fixes a security issue where named could crash on a specially
+  crafted record.  [RT #30416]
+  (* Security fix *)
++--------------------------+
+Wed Sep 12 06:04:55 UTC 2012
+n/netatalk-2.2.3-x86_64-4.txz:  Rebuilt.
+  Fix the install script so that it leaves rc.atalk.new when the package is
+  upgraded instead of deleting it and leaving nothing but the old rc.atalk.
+  Thanks to Sorin Mitrica.
++--------------------------+
+Wed Sep 12 02:45:31 UTC 2012
+a/sysvinit-scripts-2.0-noarch-10.txz:  Rebuilt.
+  Use start parameter when running /etc/rc.d/rc.atalk.
+n/ca-certificates-20120623-noarch-2.txz:  Rebuilt.
+  Use an installer script to make sure that update-ca-certificates works on
+  a fresh installation.  Thanks to DarkVision on LQ.
+n/netatalk-2.2.3-x86_64-3.txz:  Rebuilt.
+  Switched to a better rc.atalk that parses the contents of netatalk.conf.
+  Thanks to gerasimos_h.
 +--------------------------+
-Fri Apr 22 18:38:01 UTC 2011
-Cave closing soon.  All adventurers exit immediately through Main Office.
-a/aaa_elflibs-13.37-x86_64-7.txz:  Rebuilt.
-ap/mpg123-1.13.3-x86_64-1.txz:  Upgraded.
-l/glib2-2.28.6-x86_64-1.txz:  Upgraded.
-  Thanks to Steve Kennedy for pointing this out, as it fixes a possible crash.
-testing/source/linux-2.6.35.12-configs/:  Added.
-  Just in case anyone is intending to follow the longterm branch of the Linux
-  kernel, here are some sample .config files that may be a useful starting
-  point.  I imagine most people who would want to run this would be using it
-  on a server, so a few options were tweaked to optimize it for that.
-  Some of the highlights versus the previous 2.6.35.11 configs:
-    BLK_DEV_LOOP y -> m
-    FIREWIRE n -> m
-    HZ 1000 -> 100
-    MOUSE_PS2_ELANTECH n -> y
-    PHONET m -> n
-    PREEMPT_NONE n -> y
-    PREEMPT_VOLUNTARY y -> n
-+--------------------------+
-Fri Apr 22 04:29:56 UTC 2011
-a/pkgtools-13.37-noarch-8.tgz:  Rebuilt.
-  Set LC_MESSAGES=C in installpkg.
-  Thanks to guanx.
+Mon Sep 10 22:19:55 UTC 2012
+a/sysvinit-scripts-2.0-noarch-9.txz:  Rebuilt.
+  In rc.M, make sure we are actually returning from runlevel 1 before trying
+  to restart udev.  Thanks to Cal Peake.
+a/udev-182-x86_64-5.txz:  Rebuilt.
+  Don't enable autosuspend for some HID devices.  With a 3.5+ kernel, this
+  might cause these input devices to become non-responsive.
+  Thanks to Patrick Verner.
+ap/alsa-utils-1.0.26-x86_64-1.txz:  Upgraded.
+  Removed alsaconf, which does not work with kmod.
+l/alsa-lib-1.0.26-x86_64-1.txz:  Upgraded.
+l/gdk-pixbuf2-2.26.1-x86_64-2.txz:  Rebuilt.
+  Patched update-gdk-pixbuf-loaders to fix output on multilib systems.
+  Thanks to Cal Peake.
+l/seamonkey-solibs-2.12.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+x/scim-1.4.14-x86_64-2.txz:  Rebuilt.
+  Compile using --with-gtk-version=2 to fix problems with scim-setup.
+  Thanks to Thomas Choi and alienBOB.
+xap/seamonkey-2.12.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
++--------------------------+
+Mon Sep 10 02:55:29 UTC 2012
+ap/hplip-3.12.9-x86_64-1.txz:  Upgraded.
+  This update fixes some known scanning bugs.
+  Thanks to Ken Zalewski.
+ap/mc-4.8.4-x86_64-2.txz:  Rebuilt.
+  Patched file save problem caused by a missing '/' in the tmp directory path.
+  Thanks to guanx on LQ.
+n/bluez-4.99-x86_64-2.txz:  Rebuilt.
+  Enable the audio socket in audio.conf.
+  Thanks to guanx on LQ.
+xap/mozilla-thunderbird-15.0.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+xap/xine-ui-0.99.6-x86_64-1.txz:  Upgraded.
+  Willy Sudiarto Raharjo claims this one is better than 0.99.5, so I guess we
+  will see (quickly).  After this, I'm going to be far more resistant to any
+  attempts to try to resume the devel cycle.  ;-)
++--------------------------+
+Sun Sep  9 03:00:36 UTC 2012
+xap/xine-ui-0.99.5-x86_64-3.txz:  Reverted.
+  The file open shortcut appears to be broken in the newer xine-ui.  Probably
+  safer to just revert it at this point.  The new xine-lib seems OK, though.
++--------------------------+
+Sat Sep  8 20:04:10 UTC 2012
+ap/mc-4.8.4-x86_64-1.txz:  Upgraded.
+  The stable verson of mc has several known, annoying bugs.  They are fixed in
+  this version...  hopefully without too many new ones.
+xap/xine-lib-1.1.21-x86_64-1.txz:  Upgraded.
+  This is a bugfix release, and had flown under the radar here due to previous
+  1.2.x releases.  I've tested it and it at least works as well as the package
+  it replaces.  With phonon-xine deprecated, I'm not sure how long Xine will
+  be included in Slackware, but this update doesn't seem to hurt so we'll take
+  it.  Thanks to Willy Sudiarto Raharjo.
+xap/xine-ui-0.99.7-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.  Thanks to Willy Sudiarto Raharjo.
++--------------------------+
+Fri Sep  7 20:27:46 UTC 2012
+a/dcron-4.5-x86_64-4.txz:  Rebuilt.
+  After following the discussion about it on LQ, it seems better to not
+  direct script output in run-parts to /dev/null, since the default crontab
+  does that already.  That way if someone wants to get cron job output
+  mailed to them it's easy to do by editing the crontab.  Thanks to NoStressHQ.
+a/sysvinit-scripts-2.0-noarch-8.txz:  Rebuilt.
+  Updated rescan-scsi-bus and patched around a test that fails.
+  Thanks to slacktroll on LQ.
+xap/mozilla-firefox-15.0.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
 isolinux/initrd.img:  Rebuilt.
-  Fixed GPT support for {amiraid,ataraid,cciss,ida,rd} controllers.
-  Thanks again to Greg Chandler for quick testing.
-testing/packages/kernel-firmware-2.6.38.4-noarch-1.txz:  Upgraded.
-testing/packages/kernel-generic-2.6.38.4-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-headers-2.6.38.4-x86-1.txz:  Upgraded.
-testing/packages/kernel-huge-2.6.38.4-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-modules-2.6.38.4-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-source-2.6.38.4-noarch-1.txz:  Upgraded.
-  BLK_DEV_LOOP y -> m
-  MOUSE_PS2_ELANTECH n -> y
+  Updated /sbin/rescan-scsi-bus.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
+  Updated /sbin/rescan-scsi-bus.
 +--------------------------+
-Thu Apr 21 03:13:14 UTC 2011
-xap/rdesktop-1.6.0-x86_64-2.txz:  Rebuilt.
-  Patched a traversal vulnerability (disallow /.. requests).
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1595
-  (* Security fix *)
+Thu Sep  6 21:58:57 UTC 2012
+a/dcron-4.5-x86_64-3.txz:  Rebuilt.
+  Fixed run-parts to only output stderr, so that cron will only send mail
+  in the event that a script runs into errors.
+  Thanks to Barcoboy on LQ.
+a/sysvinit-scripts-2.0-noarch-7.txz:  Rebuilt.
+  In rc.S, don't run cryptsetup three times in a loop, since it will already
+  allow three password attempts by default.
+  Thanks to Michael L. Semon.
++--------------------------+
+Tue Sep  4 21:54:46 UTC 2012
+A few more adjustments, but probably not enough to merit calling this a
+new RC release.  Pretty close now, but please report any bugs!
+a/aaa_elflibs-14.0-x86_64-4.txz:  Rebuilt.
+a/coreutils-8.19-x86_64-1.txz:  Upgraded.
+  Upgraded for some important bugfixes, including possible data loss in
+  "sort" output.
+a/eject-2.1.5-x86_64-3.txz:  Rebuilt.
+  Fixed "eject -T".  Thanks to Darrell Anderson.
+a/etc-14.0-x86_64-1.txz:  Upgraded.
+  Fixed root $path in /etc/csh.login.new.
+  Thanks to Goran Lazic.
+a/grep-2.14-x86_64-1.txz:  Upgraded.
+  Upgraded for some important bugfixes.  This fixes a matching bug when
+  using a multibyte locale, and merges a more refined patch from upstream
+  for the false detection of small text files as binary on certain
+  filesystems (including Btrfs).
+a/mkinitrd-1.4.7-x86_64-6.txz:  Rebuilt.
+  Fixed sed substitution for README.initrd.
+  Thanks to D1ver on LQ.
+l/pygobject-2.28.6-x86_64-2.txz:  Rebuilt.
+  Patched type mismatch.
+  Thanks to wadsworth on LQ.
+n/gnutls-3.0.23-x86_64-1.txz:  Upgraded.
+  Upgraded for some important bugfixes.
+n/netatalk-2.2.3-x86_64-2.txz:  Rebuilt.
+  Handle atalkd.conf.new and papd.conf.new in doinst.sh.
+  Thanks to elyk on LQ.
 isolinux/initrd.img:  Rebuilt.
-  Support GPT on RAID devices.
-  Thanks to Greg Chandler.
+  Fixed size of a full installation in setup (7.3GB).
+  Added comment=x-gvfs-show to /dev/cdrom line in /etc/fstab.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Support GPT on RAID devices.
-+--------------------------+
-Wed Apr 20 04:26:15 UTC 2011
-l/polkit-0.101-x86_64-2.txz:  Rebuilt.
-  Patched to fix a race condition that could allow a local user to execute
-  arbitrary code as root.  Thanks to Neel Mehta of Google.
+  Fixed size of a full installation in setup (7.3GB).
+  Added comment=x-gvfs-show to /dev/cdrom line in /etc/fstab.
++--------------------------+
+Fri Aug 31 20:24:44 UTC 2012
+e/emacs-24.2-x86_64-1.txz:  Upgraded.
++--------------------------+
+Thu Aug 30 23:35:53 UTC 2012
+Well, we fixed a lot of bugs and took some upgrades that we pretty much
+needed to take since they were important bug and/or security fixes, so
+it looks like we'll need to have a 14.0 release candidate 4 and another
+(last?) round of testing.  Hopefully the fourth time is the charm!
+a/cpio-2.11-x86_64-2.txz:  Rebuilt.
+  Fix CRC evaluation.
+  Thanks to appzer0 and Nekrodes.
+a/dbus-1.4.20-x86_64-3.txz:  Rebuilt.
+  Patched to set HOME properly to avoid a /.config directory.  The fix is
+  a little ugly, but seems harmless enough (and is less ugly than /.config).
+a/glibc-solibs-2.15-x86_64-6.txz:  Rebuilt.
+a/glibc-zoneinfo-2012e_2012e-noarch-6.txz:  Rebuilt.
+a/pkgtools-14.0-noarch-2.tgz:  Rebuilt.
+  In setup.services, don't say that D-Bus is needed by HAL.
+a/slocate-3.1-x86_64-4.txz:  Rebuilt.
+  Patched to use lstat64 and -D_LARGEFILE64_SOURCE.  Thanks to Mancha+.
+  Patched to fix information leak of filenames in protected directories.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0227
+  (* Security fix *)
+a/usb_modeswitch-1.2.4-x86_64-2.txz:  Rebuilt.
+  Compressed man page.
+ap/mysql-5.5.27-x86_64-1.txz:  Upgraded.
+  Thanks to Ken Zalewski.
+ap/powertop-2.1-x86_64-2.txz:  Rebuilt.
+  Compressed man page.
+ap/slackpkg-2.82.0-noarch-8.tgz:  Rebuilt.
+  Merged updated mirrors lists.  Thanks to Jordan Clarke.
+ap/vim-7.3.645-x86_64-1.txz:  Upgraded.
+  Upgraded to the latest patchlevel.
+d/git-1.7.12-x86_64-1.txz:  Upgraded.
+l/glibc-2.15-x86_64-6.txz:  Rebuilt.
+  Patched multiple integer overflows in the strtod, strtof, strtold, and
+  strtod_l functions in stdlib in the GNU C Library allow local users to
+  cause a denial of service (application crash) and possibly execute
+  arbitrary code via a long string, which triggers a stack-based buffer
+  overflow.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3480
+  (* Security fix *)
+l/glibc-i18n-2.15-x86_64-6.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-6.txz:  Rebuilt.
+l/keybinder-0.3.0-x86_64-2.txz:  Rebuilt.
+  Disabled the python module which isn't currently used by anything and
+  causes a crash when trying to get a module list from help('modules').
+l/qt-4.8.2-x86_64-4.txz:  Rebuilt.
+  Reverted JIT patch that was causing kwin crashes.
+l/seamonkey-solibs-2.12-x86_64-1.txz:  Upgraded.
+n/gpa-0.9.3-x86_64-1.txz:  Upgraded.
+  Fixes a crash.  Thanks to ponce on LQ.
+n/openssh-6.1p1-x86_64-1.txz:  Upgraded.
+xap/fvwm-2.6.5-x86_64-6.txz:  Rebuilt.
+  Added back the icons from ancient-icons.tar.gz, which are still used in
+  the system.fvwm2rc-sample-95 example.  Thanks to Jens Rottmann.
+xap/gimp-2.8.2-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-15.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1485
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-extra/bash-completion/bash-completion-1.3-noarch-4.txz:  Rebuilt.
-  Fixed slapt file and added --terse support for pkgtools.
-  Thanks to _GArik_.
-testing/source/linux-2.6.39-rc4-configs/:  Upgraded.
-+--------------------------+
-Mon Apr 18 19:13:18 UTC 2011
-a/aaa_elflibs-13.37-x86_64-6.txz:  Rebuilt.
-a/acl-2.2.50-x86_64-1.txz:  Upgraded.
-  Fix the --physical option in setfacl and getfacl to prevent symlink attacks.
-  Thanks to Martijn Dekker for the notification.
+xap/mozilla-thunderbird-15.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4411
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
   (* Security fix *)
-a/attr-2.4.45-x86_64-1.txz:  Upgraded.
+xap/seamonkey-2.12-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+xap/vim-gvim-7.3.645-x86_64-1.txz:  Upgraded.
+xfce/xfce4-notifyd-0.2.2-x86_64-2.txz:  Rebuilt.
+  Compressed man page.
+extra/xf86-video-fbdev/xf86-video-fbdev-0.4.3-x86_64-1.txz:  Added.
+  This might be needed in cases where X doesn't provide a driver for a
+  video device, but the kernel supports a framebuffer for it.  It can't
+  be in the main tree, though, because it breaks starting X without an
+  xorg.conf.  Thanks to Jens Rottmann.
+testing/packages/rp-pppoe-3.11-x86_64-1.txz:  Added.
++--------------------------+
+Fri Aug 24 20:08:37 UTC 2012
+This is Slackware 14.0 release candidate 3, and is hopefully the last stop
+on our long road to a stable Slackware release soon.  After hearing that
+the 3.4.x kernel series will have long term support, I tested 3.4.9 hoping
+that it would prove stable enough to use that as the release kernel, but
+there are problems with an oops in kernel/time/clocksource.c every few boots.
+Given that the 3.2.x series has been very stable, it seems prudent to stick
+with that for release, and 3.2.28 is going to be the release kernel.  So,
+one more round of testing.  Let me know if there are any problems.  Thanks!
+a/aaa_base-14.0-x86_64-5.txz:  Rebuilt.
+  Added /etc/os-release.
+  Touched /etc/slackware-version to bring the datestamp closer to release.
+a/btrfs-progs-20120821-x86_64-1.txz:  Upgraded.
+  There haven't been any changes in git since the last pull, but this
+  package needed a rebuild anyway to get rid of the warnings in the
+  slack-desc that are no longer applicable.
+  Thanks to Jens Rottmann.
+a/e2fsprogs-1.42.5-x86_64-1.txz:  Upgraded.
+a/glibc-solibs-2.15-x86_64-5.txz:  Rebuilt.
+a/glibc-zoneinfo-2012e_2012e-noarch-5.txz:  Rebuilt.
+  Upgraded to tzcode2012e and tzdata2012e.
+a/kbd-1.15.3-x86_64-2.txz:  Rebuilt.
+  Added .gz to three patches in the SlackBuild that weren't being applied.
+  Thanks to guru.
+a/kernel-generic-3.2.28-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.28-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.28-x86_64-1.txz:  Upgraded.
+a/lilo-23.2-x86_64-3.txz:  Rebuilt.
+  Removed upstream liloconfig perl script.
+  Thanks to dr. s.
+a/mkinitrd-1.4.7-x86_64-5.txz:  Rebuilt.
+  Added a -B option to scan for Btrfs multi-device filesystems.
+  Thanks to Aaron W. Hsu.
+  Fixed grep to build load_kernel_modules script correctly.
+  Thanks to burdi01 on LQ.
+a/shadow-4.1.4.3-x86_64-6.txz:  Rebuilt.
+  Patched adduser to add "lp" (needed for scanning).
+  Thanks to Niki Kovacs.
+a/syslinux-4.05-x86_64-2.txz:  Rebuilt.
+  Patched a bug in altmbr handling.
+  Thanks to Ruarí Ødegaard.
+a/udev-182-x86_64-4.txz:  Rebuilt.
+  Commented out the entries in /lib/modprobe.d/isapnp.conf to fix
+  the error attempting to load rtc_cmos.  Thanks to GazL.
+ap/cdrtools-3.01a08-x86_64-1.txz:  Upgraded.
+  Fixes a bug where ISO images do not conform to the ECMA119 standard.
+  Thanks to Ady.
+ap/mc-4.8.1.4-x86_64-1.txz:  Upgraded.
+  This fixes a bug where data can be lost when trying to move files to a
+  full partition, as well as some other bugs.
+  Thanks to Alex Bukhansky.
+ap/powertop-2.1-x86_64-1.txz:  Upgraded.
+  Thanks to bnguyen on LQ.
+ap/slackpkg-2.82.0-noarch-7.tgz:  Rebuilt.
+  Updated mirrors list for Slackware 14.0.  Thanks to Jordan Clarke.
+ap/soma-2.8.5-noarch-1.txz:  Upgraded.
+  Thanks to David Woodfall.
+ap/sqlite-3.7.13-x86_64-1.txz:  Upgraded.
+d/gdb-7.5-x86_64-1.txz:  Upgraded.
+  Needed for x32 support.
+d/kernel-headers-3.2.28-x86-1.txz:  Upgraded.
+d/nasm-2.10.04-x86_64-1.txz:  Upgraded.
+  This resolves bugs when using the AVX instruction set.
+  Thanks to Konrad Rzepecki.
+d/perl-5.16.1-x86_64-1.txz:  Upgraded.
+  Also upgraded to DBI-1.622 and XML-Simple2.20.
+k/kernel-source-3.2.28-noarch-1.txz:  Upgraded.
+l/QScintilla-2.6.1-x86_64-3.txz:  Rebuilt.
+  Linked shared libraries into /usr/lib${LIBDIRSUFFIX}, fixing some apps
+  compiled with cmake.  Thanks to Dhaby Xiloj.
+l/db48-4.8.30-x86_64-2.txz:  Rebuilt.
+  Removed broken (and unneeded) /usr/include/db4 symlink.
+  Thanks to Francisco Ambrozio.
+l/glibc-2.15-x86_64-5.txz:  Rebuilt.
+l/glibc-i18n-2.15-x86_64-5.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-5.txz:  Rebuilt.
+l/qt-4.8.2-x86_64-3.txz:  Rebuilt.
+  Patched crash bugs in JIT.
+  Thanks to Heinz Wiesinger.
+n/curl-7.27.0-x86_64-2.txz:  Rebuilt.
+  Fixed syntax error in /usr/bin/curl-config.
+  Thanks to Dan Church.
+n/dhcp-4.2.4_P1-x86_64-1.txz:  Upgraded.
+  This fixes memory leaks, denial of service vulnerabilities, and
+  disallows packets with zero length client ids (not valid according to
+  RFC 2132 section 9.14).
+  For more information, see:
+    https://kb.isc.org/article/AA-00736
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4539
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4868
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3954
+  (* Security fix *)
+n/httpd-2.4.3-x86_64-1.txz:  Upgraded.
+  Fixes many bugs and these security issues:
+  *) SECURITY: CVE-2012-3502  (cve.mitre.org)
+     mod_proxy_ajp, mod_proxy_http: Fix an issue in back end
+     connection closing which could lead to privacy issues due
+     to a response mixup. PR 53727. [Rainer Jung]
+  *) SECURITY: CVE-2012-2687 (cve.mitre.org)
+     mod_negotiation: Escape filenames in variant list to prevent an
+     possible XSS for a site where untrusted users can upload files to
+     a location with MultiViews enabled. [Niels Heinen <heinenn google.com>]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2687
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3502
+  (* Security fix *)
+n/netatalk-2.2.3-x86_64-1.txz:  Upgraded.
+  This branch of netatalk is required to operate with OS X 10.7 or higher.
+  I used --enable-ddp to keep AppleTalk services, but is anyone using that?
+  Thanks to Winston Niles.
+n/php-5.4.6-x86_64-1.txz:  Upgraded.
+n/samba-3.6.7-x86_64-1.txz:  Upgraded.
+n/wireless-tools-29-x86_64-9.txz:  Rebuilt.
+  Use several tests to see if a device is wireless.  Depending on kernel
+  options or drivers, some of the tests may yield a false negative, but
+  with a combination of tests the reliability should be good.
+  Thanks to Tim Thomas for the bug report.
+  Use sed to convert the MAC address to uppercase.
+  Thanks to GazL.
+  Convert `` syntax to $()
+x/xorg-server-1.12.3-x86_64-2.txz:  Rebuilt.
+  Changed Build Operating System to "Slackware 14.0 Slackware Linux Project".
+  Thanks to lotar on LQ.
+x/xorg-server-xephyr-1.12.3-x86_64-2.txz:  Rebuilt.
+x/xorg-server-xnest-1.12.3-x86_64-2.txz:  Rebuilt.
+x/xorg-server-xvfb-1.12.3-x86_64-2.txz:  Rebuilt.
+xap/audacious-3.3.1-x86_64-2.txz:  Rebuilt.
+  Include the duplicated AUTHORS and COPYING files, as the "About Audacious"
+  menu choice requires them.  Thanks to tomac.pl on LQ.
+xap/gnuplot-4.6.0-x86_64-1.txz:  Upgraded.
+  Seems like a safe enough last-minute request.
+  Thanks to Greg Tourte.
 isolinux/initrd.img:  Rebuilt.
+  Upgraded to Linux kernel 3.2.28.
+kernels/*:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-+--------------------------+
-Sun Apr 17 23:04:51 UTC 2011
-a/lrzip-0.602-x86_64-1.txz:  Added.
-  This seems like a safe little last-minute addition.
-l/libsndfile-1.0.24-x86_64-1.txz:  Upgraded.
-  Bugfix release.  The diff from .23 appears safe.
-testing/packages/libdrm-2.4.25-x86_64-1.txz:  Added.
-testing/packages/xf86-video-nouveau-git_20110417_8378443-x86_64-1.txz:  Added.
-  Thanks to Didier Spaier.
-+--------------------------+
-Sun Apr 17 02:01:57 UTC 2011
-a/sysvinit-scripts-1.2-noarch-42.txz:  Rebuilt.
-  In rc.6 and rc.K, wait no more than 5 seconds for processes holding an NFS
-  mount open to exit.  Use both -l (lazy) and -f (force) when unmounting
-  remote filesystems.
+  Upgraded to Linux kernel 3.2.28.
++--------------------------+
+Thu Aug 16 04:01:31 UTC 2012
+Getting close!  Hopefully we've cleared out most of the remaining issues
+and are nearly ready here.  We'll call this release candidate 2.
+Unless there's a very good rationale, versions are frozen.
+Any reports of remaining bugs will be gladly taken, though.
+  #include <more/cowbell.h>
+a/aaa_base-14.0-x86_64-4.txz:  Rebuilt.
+  Remove mention of HAL in the initial welcome email (mention udisks2
+  instead).  Thanks to Dave Margell.
+a/bash-4.2.037-x86_64-1.txz:  Upgraded.
+  Added all the patches on ftp.gnu.org and rebuilt.
+  Thanks to Willy Sudiarto Raharjo.
+a/btrfs-progs-20120810-x86_64-1.txz:  Upgraded.
+a/coreutils-8.18-x86_64-1.txz:  Upgraded.
+a/grep-2.13-x86_64-2.txz:  Rebuilt.
+  Merged upstream patches to fix problems with sparse or compressed files,
+  and with filesystems that store tiny files within the metadata.  This
+  should fix issues with compiling on filesystems such as btrfs and zfs.
+  Thanks to Robert Easter for the bug report.
+a/kernel-generic-3.2.27-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.27-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.27-x86_64-1.txz:  Upgraded.
+a/lilo-23.2-x86_64-2.txz:  Rebuilt.
+  Fixed two bugs in liloconfig.
+  Thanks to Citramonum on LQ.
+a/logrotate-3.8.2-x86_64-1.txz:  Upgraded.
+a/minicom-2.6-x86_64-1.txz:  Upgraded.
+  Thanks to Luiz Gustavo Zuliani for build script fixes.
+a/shadow-4.1.4.3-x86_64-5.txz:  Rebuilt.
+  Patched a bug where locale variables would be improperly sanitized from
+  the shell environment.  Thanks to Serg Bormant.
+a/smartmontools-5.43-x86_64-1.txz:  Upgraded.
+a/sysvinit-scripts-2.0-noarch-6.txz:  Rebuilt.
+  In rc.6, run rc.yp (if executable) to shut down YP services.
+  In rc.6, fix comment and output notification of SIGTERM/SIGKILL.
+  Thanks to Jonathan Woithe.
+a/usb_modeswitch-1.2.4-x86_64-1.txz:  Upgraded.
+a/util-linux-2.21.2-x86_64-5.txz:  Rebuilt.
+  Patched segfault in "column" when using long options.
+  Thanks to B Watson.
+ap/lxc-0.7.5-x86_64-1.txz:  Upgraded.
+ap/mpg123-1.14.4-x86_64-1.txz:  Upgraded.
+ap/rpm-4.10.0-x86_64-1.txz:  Upgraded.
+  Thanks to Robby Workman.
+d/ccache-3.1.8-x86_64-1.txz:  Upgraded.
+  Thanks to Erik Jan Tromp.
+d/kernel-headers-3.2.27-x86-1.txz:  Upgraded.
+d/libtool-2.4.2-x86_64-1.txz:  Upgraded.
+  Thanks to Robby Workman.
+e/emacs-24.1-x86_64-6.txz:  Rebuilt.
+  Patched to fix a security flaw in the file-local variables code.
+  When the Emacs user option `enable-local-variables' is set to `:safe'
+  (the default value is t), Emacs should automatically refuse to evaluate
+  `eval' forms in file-local variable sections.  Due to the bug, Emacs
+  instead automatically evaluates such `eval' forms.  Thus, if the user
+  changes the value of `enable-local-variables' to `:safe', visiting a
+  malicious file can cause automatic execution of arbitrary Emacs Lisp
+  code with the permissions of the user.  Bug discovered by Paul Ling.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3479
+  (* Security fix *)
+k/kernel-source-3.2.27-noarch-1.txz:  Upgraded.
+  Enable heap randomization (CONFIG_BRK=N).
+  Thanks to Geoff Walton.
+kde/amarok-2.6.0-x86_64-1.txz:  Upgraded.
+  Thanks to Heinz Wiesinger.
+l/db44-4.4.20-x86_64-3.txz:  Rebuilt.
+  Renamed binaries to contain "db44" to avoid overlap with db48.
+l/db48-4.8.30-x86_64-1.txz:  Added.
+l/fribidi-0.19.2-x86_64-3.txz:  Rebuilt.
+  Fixed missing docs.  Thanks to Erik Jan Tromp and Stuart Winter.
+l/gst-plugins-base-0.10.36-x86_64-2.txz:  Rebuilt.
+l/gst-plugins-good-0.10.31-x86_64-3.txz:  Rebuilt.
+  Added gio and soup plugins to enable playing files over http.
+  Thanks to Heinz Wiesinger.
+l/gtk+2-2.24.10-x86_64-2.txz:  Rebuilt.
+  Don't run "make install" in the SlackBuild, since $DESTDIR is now properly
+  handled for /etc/gtk-2.0/.  Thanks to Adrien Nader.
+l/liblastfm-1.0.1-x86_64-1.txz:  Upgraded.
+  Thanks to Heinz Wiesinger.
+l/libmtp-1.1.3-x86_64-2.txz:  Rebuilt.
+  Removed empty 90-libmtp.rules.
+  Thanks to Iouri Kharon.
+l/phonon-gstreamer-4.6.2-x86_64-1.txz:  Upgraded.
+l/polkit-0.105-x86_64-3.txz:  Rebuilt.
+  Fixed typo in 20-plugdev-group-mount-override.pkla.
+  Thanks to Chess Griffin.
+l/shared-mime-info-1.0-x86_64-2.txz:  Rebuilt.
+  Minor fix to the install script.
+  Thanks to Citramonum on LQ.
+l/t1lib-5.1.2-x86_64-3.txz:  Rebuilt.
+  Patched various overflows, crashes, and pointer bugs.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2642
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0764
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1552
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1553
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1554
+  (* Security fix *)
+n/NetworkManager-0.9.4.0-x86_64-2.txz:  Rebuilt.
+  Patched to fix nmcli.  Thanks to parcox on LQ.
+n/gnutls-3.0.22-x86_64-1.txz:  Upgraded.
+n/network-scripts-14.00-noarch-3.txz:  Rebuilt.
+  In rc.inet2, run rc.yp rather than sourcing it.
+n/wget-1.14-x86_64-1.txz:  Upgraded.
+n/yptools-2.12-x86_64-3.txz:  Rebuilt.
+  Fixed scripts to use /usr/lib${LIBDIRSUFFIX}/yp.
+  Thanks to Niki Kovacs.
+  Switched to a new rc.yp script supporting start|stop|restart.
+  If there's an existing script, it will be installed as a .new with the same
+  permissions as the existing rc.yp, which had defaulted to executable since
+  without editing it did nothing.  Unless you plan to use YP, be aware that
+  moving the new script into place with 755 perms will cause a line of
+  (harmless) noise telling you that YP has not configured yet.
+  Thanks to Jonathan Woithe.
+x/scim-1.4.14-x86_64-1.txz:  Upgraded.
+  Thanks to Robby Workman.
+xap/audacious-3.3.1-x86_64-1.txz:  Upgraded.
+xap/audacious-plugins-3.3.1-x86_64-1.txz:  Upgraded.
+xap/fvwm-2.6.5-x86_64-5.txz:  Rebuilt.
+  Since we run dbus-launch in the startup script, don't start it in xinitrc.
+  Thanks to Robby Workman.
+xap/geeqie-1.1-x86_64-1.txz:  Upgraded.
+xap/sane-1.0.22-x86_64-5.txz:  Rebuilt.
+  Added pkgconfig file for sane-backends.
+  Thanks to Johannes Schöpfer and Jonathan Woithe.
+xap/windowmaker-0.95.3-x86_64-3.txz:  Rebuilt.
+  Fixed incorrect hard-coded paths in the menu generator code.
+  Thanks to Gary Langshaw.
 isolinux/initrd.img:  Rebuilt.
+  Upgraded to Linux kernel 3.2.27.
+  Include the staging/hv modules.  Thanks to Victor Miasnikov.
+  Bind mount /dev in SeTconfig.
+  Support virtual devices such as /dev/vda and /dev/xvda in /sbin/probe.
+  Thanks to Ken Treadway.
+kernels/*:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-usb-and-pxe-installers/usbimg2disk.sh:  Upgraded.
-+--------------------------+
-Sat Apr 16 04:20:33 UTC 2011
-a/acpid-2.0.9-x86_64-1.txz:  Upgraded.
-a/coreutils-8.11-x86_64-1.txz:  Upgraded.
-  Thanks to Cal Peake for DIR_COLORS fixes and updates.
-a/less-443-x86_64-1.txz:  Upgraded.
-a/tar-1.26-x86_64-1.tgz:  Upgraded.
-ap/dvd+rw-tools-7.1-x86_64-2.txz:  Rebuilt.
-ap/mc-4.7.5.2-x86_64-1.txz:  Upgraded.
-d/git-1.7.4.4-x86_64-1.txz:  Upgraded.
-l/gst-plugins-good-0.10.28-x86_64-2.txz:  Rebuilt.
-  Applied upstream patch to fix capture from interlaced video devices.
-  Thanks to Virgil Bucoci.
-n/lftp-4.2.2-x86_64-1.txz:  Upgraded.
-n/php-5.3.6-x86_64-6.txz:  Rebuilt.
-  Patched php.ini-development and php.ini-production to set
-  session.save_path = "/var/lib/php"
-  Thanks to jrecortel, ponce, and Matteo Bernardini.
-x/libX11-1.4.3-x86_64-2.txz:  Rebuilt.
-  Restored XKeysymDB.
-x/xaw3d-20110415git-x86_64-1.txz:  Upgraded.
-  Thanks to Markus Steinborn and winfried.
-x/xf86-video-intel-2.15.0-x86_64-1.txz:  Upgraded.
-xap/gv-3.7.1-x86_64-2.txz:  Rebuilt.
-  Patched to fix key bindings when XKeysymDB is not present.
-  Thanks to Iain M Hall.
+  Upgraded to Linux kernel 3.2.27.
+  Include the staging/hv modules.  Thanks to Victor Miasnikov.
+  Bind mount /dev in SeTconfig.
+  Support virtual devices such as /dev/vda and /dev/xvda in /sbin/probe.
+  Thanks to Ken Treadway.
++--------------------------+
+Fri Aug 10 01:32:48 UTC 2012
+n/wireless-tools-29-x86_64-8.txz:  Rebuilt.
+  Fix comparison where a network interface is not wireless.
++--------------------------+
+Thu Aug  9 22:34:59 UTC 2012
+Good hello, and happy Thursday!  Mercury went direct early yesterday morning,
+and it was like the bugs started to fix themselves.  It's almost enough to get
+me believing in that hocus-pocus nonsense!  So, here's a bunch of updates that
+fix all of the reported issues in the beta, and we'll call this the 14.0
+release candidate 1.  Still some updates needed for the top-level
+documentation files, but we're clearly in the home stretch now (finally).
+Test away, and report any remaining bugs!
+a/aaa_base-14.0-x86_64-3.txz:  Rebuilt.
+  Updated initial emails.
+a/cups-1.5.4-x86_64-2.txz:  Rebuilt.
+  Patched to prevent a reset that causes partial printing with certain
+  printers.  Thanks to 4Strings on LQ.
+a/dcron-4.5-x86_64-2.txz:  Rebuilt.
+  Fixed error handling in /usr/bin/run-parts.
+  Thanks to NoStressHQ.
+a/gptfdisk-0.8.5-x86_64-2.txz:  Rebuilt.
+  Remove the dependency on icu4c in the Makefile, otherwise 20MB of shared
+  libraries would have to be added to the installer.
+a/kernel-generic-3.2.26-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.26-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.26-x86_64-1.txz:  Upgraded.
+a/kmod-9-x86_64-3.txz:  Rebuilt.
+  Fixed paths in man pages.
+  Thanks to Robby Workman.
+a/openssl-solibs-1.0.1c-x86_64-3.txz:  Rebuilt.
+a/pkgtools-14.0-noarch-1.tgz:  Upgraded.
+  Updated version number in pkgtool.
+d/kernel-headers-3.2.26-x86-1.txz:  Upgraded.
+f/linux-howtos-20120707-noarch-1.txz:  Upgraded.
+k/kernel-source-3.2.26-noarch-1.txz:  Upgraded.
+kde/analitza-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ark-4.8.5-x86_64-1.txz:  Upgraded.
+kde/blinken-4.8.5-x86_64-1.txz:  Upgraded.
+kde/calligra-2.4.3-x86_64-4.txz:  Rebuilt.
+  Patched an overflow in Calligra Words.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3456
+  (* Security fix *)
+kde/cantor-4.8.5-x86_64-1.txz:  Upgraded.
+kde/filelight-4.8.5-x86_64-1.txz:  Upgraded.
+kde/gwenview-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kaccessible-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kactivities-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kalgebra-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kalzium-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kamera-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kanagram-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kate-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kbruch-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kcalc-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kcharselect-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kcolorchooser-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kde-baseapps-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kde-runtime-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kde-wallpapers-4.8.5-noarch-1.txz:  Upgraded.
+kde/kde-workspace-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdeadmin-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdeartwork-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdegames-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-mobipocket-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-strigi-analyzer-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-thumbnailers-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdelibs-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdemultimedia-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdenetwork-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdepim-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdepim-runtime-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdepimlibs-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdeplasma-addons-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdesdk-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdetoys-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdewebdev-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kdf-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kfloppy-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kgamma-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kgeography-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kgpg-4.8.5-x86_64-1.txz:  Upgraded.
+kde/khangman-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kig-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kiten-4.8.5-x86_64-1.txz:  Upgraded.
+kde/klettres-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kmag-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kmousetool-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kmouth-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kmplot-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kolourpaint-4.8.5-x86_64-1.txz:  Upgraded.
+kde/konsole-4.8.5-x86_64-1.txz:  Upgraded.
+kde/korundum-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kremotecontrol-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kruler-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ksaneplugin-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ksecrets-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ksnapshot-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kstars-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ktimer-4.8.5-x86_64-1.txz:  Upgraded.
+kde/ktouch-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kturtle-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kwallet-4.8.5-x86_64-1.txz:  Upgraded.
+kde/kwordquiz-4.8.5-x86_64-1.txz:  Upgraded.
+kde/libkdcraw-4.8.5-x86_64-1.txz:  Upgraded.
+kde/libkdeedu-4.8.5-x86_64-1.txz:  Upgraded.
+kde/libkexiv2-4.8.5-x86_64-1.txz:  Upgraded.
+kde/libkipi-4.8.5-x86_64-1.txz:  Upgraded.
+kde/libksane-4.8.5-x86_64-1.txz:  Upgraded.
+kde/marble-4.8.5-x86_64-1.txz:  Upgraded.
+kde/okular-4.8.5-x86_64-1.txz:  Upgraded.
+kde/oxygen-gtk2-1.3.0-x86_64-1.txz:  Upgraded.
+kde/oxygen-icons-4.8.5-x86_64-1.txz:  Upgraded.
+kde/parley-4.8.5-x86_64-1.txz:  Upgraded.
+kde/perlkde-4.8.5-x86_64-1.txz:  Upgraded.
+kde/perlqt-4.8.5-x86_64-1.txz:  Upgraded.
+kde/printer-applet-4.8.5-x86_64-1.txz:  Upgraded.
+kde/pykde4-4.8.5-x86_64-1.txz:  Upgraded.
+kde/qtruby-4.8.5-x86_64-1.txz:  Upgraded.
+kde/rocs-4.8.5-x86_64-1.txz:  Upgraded.
+kde/smokegen-4.8.5-x86_64-1.txz:  Upgraded.
+kde/smokekde-4.8.5-x86_64-1.txz:  Upgraded.
+kde/smokeqt-4.8.5-x86_64-1.txz:  Upgraded.
+kde/step-4.8.5-x86_64-1.txz:  Upgraded.
+kde/superkaramba-4.8.5-x86_64-1.txz:  Upgraded.
+kde/svgpart-4.8.5-x86_64-1.txz:  Upgraded.
+kde/sweeper-4.8.5-x86_64-1.txz:  Upgraded.
+kdei/kde-l10n-ar-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bg-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bs-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca@valencia-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-cs-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-da-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-de-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-el-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-en_GB-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-es-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-et-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-eu-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fa-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fi-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fr-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ga-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-gl-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-he-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hr-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hu-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ia-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-id-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-is-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-it-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ja-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-kk-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-km-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ko-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lt-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lv-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nb-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nds-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nl-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nn-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pa-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pl-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt_BR-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ro-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ru-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-si-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sk-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sl-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sr-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sv-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tg-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-th-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tr-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ug-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-uk-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-vi-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-wa-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_CN-4.8.5-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_TW-4.8.5-noarch-1.txz:  Upgraded.
+l/boost-1.49.0-x86_64-3.txz:  Rebuilt.
+  Linked against icu4c.  The built script was also upgraded to account for
+  changes in the way boost is configured, and to only build the parts needed.
+  Thanks to Heinz Wiesinger.
+l/glib2-2.32.4-x86_64-1.txz:  Upgraded.
+l/gnome-keyring-3.4.1-x86_64-2.txz:  Rebuilt.
+  Fixed improper password/passphrase caching.
+  For more information, see:
+    https://bugzilla.gnome.org/show_bug.cgi?id=681081
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3466
+  (* Security fix *)
+l/gtk+3-3.4.4-x86_64-1.txz:  Upgraded.
+l/polkit-0.105-x86_64-2.txz:  Rebuilt.
+  Added default policy files for udisks2 and NetworkManager events.  These
+  along with GazL's xinitrc/startup script improvements seem to prevent
+  ConsoleKit, PolicyKit, and D-Bus from being stupid most of the time.
+  GazL's fix _should_ have been enough, but you know what they say about
+  the difference between theory and practice.  :-)  The NetworkManager .pkla
+  file seems to be needed anyway to allow users in the netdev group to
+  modify network settings without being bothered to enter the root password.
+  Thanks much to Chess Griffin.
+l/qt-4.8.2-x86_64-2.txz:  Rebuilt.
+  Patched libQtWebKit.la and QtWebKit.pc to remove a false dependency on
+  libwebcore.a, which is used internally at build time.
+  Thanks to Fridrich von Stauffenberg and Eric Hameleers.
+l/raptor2-2.0.8-x86_64-1.txz:  Upgraded.
+  Thanks to Heinz Wiesinger.
+l/vte-0.28.2-x86_64-2.txz:  Rebuilt.
+  Patched to fix high CPU usage that can be triggered by escape sequences.
+  Thanks to Mancha.
+n/ModemManager-0.5.2.0-x86_64-1.txz:  Upgraded.
+n/network-scripts-14.00-noarch-2.txz:  Rebuilt.
+  Patched rc.inet1 to handle slightly changed ifconfig output.
+  Thanks to Darrell Anderson.
+n/openssl-1.0.1c-x86_64-3.txz:  Rebuilt.
+  Patched the certwatch script to quit warning about expired certificates
+  in /etc/ssl/certs/ca-certificates.crt.  The script was intended to warn
+  when your personal certificates are about to expire, but it trips over
+  this one that bundles the CA certs.  Thanks to ponce.
+n/php-5.4.5-x86_64-2.txz:  Rebuilt.
+  Added support for intl module.
+  Thanks to Heinz Wiesinger.
+n/wireless-tools-29-x86_64-7.txz:  Rebuilt.
+  Don't use the directory /sys/class/netdev_name/wireless/ directory to
+  detect wireless cards in rc.wireless as it depends on
+  CONFIG_WIRELESS_EXT_SYSFS=y in the kernel, which is deprecated and will
+  be removed in future kernels.  Perhaps this was the cause of some of the
+  reports of non-functional wireless interfaces?
+  Thanks to Konrad Rzepecki.
+x/x11-skel-7.7-x86_64-1.txz:  Upgraded.
+  In xwmconfig, write a $HOME/.xsession in addition to $HOME/.xinitrc,
+  allowing users to choose a default window manager when using XDM.
+  Thanks to GazL.
+x/xterm-281-x86_64-1.txz:  Upgraded.
+  Thanks to Robby Workman.
+xap/blackbox-0.70.1-x86_64-7.txz:  Rebuilt.
+  Created a new startup script "startblackbox" called from xinitrc.blackbox
+  to allow running dbus-launch within ck-session-launch.  This fixes Thunar
+  device mounting without breaking XDM.  Thanks much to GazL!
+xap/fluxbox-1.3.2-x86_64-4.txz:  Rebuilt.
+  Start dbus-launch in startfluxbox.  Thanks to GazL.
+xap/fvwm-2.6.5-x86_64-4.txz:  Rebuilt.
+  Created a new startup script "startfvwm2" called from xinitrc.fvwm2 to allow
+  running dbus-launch within ck-session-launch.  Thanks to GazL.
+xfce/xfce4-weather-plugin-0.8.1-x86_64-1.txz:  Upgraded.
+extra/wicd/wicd-1.7.2.4-x86_64-4.txz:  Rebuilt.
+  Fixed some slightly incorrect permissions.
 isolinux/initrd.img:  Rebuilt.
-pasture/xf86-video-intel-2.14.0-x86_64-1.txz:  Moved from x/.
-testing/packages/kernel-firmware-2.6.38.3-noarch-1.txz:  Upgraded.
-testing/packages/kernel-generic-2.6.38.3-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-headers-2.6.38.3-x86-1.txz:  Upgraded.
-testing/packages/kernel-huge-2.6.38.3-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-modules-2.6.38.3-x86_64-1.txz:  Upgraded.
-testing/packages/kernel-source-2.6.38.3-noarch-1.txz:  Upgraded.
-testing/source/linux-2.6.38.3-configs/:  Upgraded.
-testing/source/linux-2.6.39-rc3-configs/:  Upgraded.
+  Upgraded to Linux kernel 3.2.26.
+  Replaced gptfdisk utilities with the rebuilt versions.
+  Added MMC support to /sbin/probe.  Thanks to David Spencer.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-+--------------------------+
-Wed Apr 13 03:07:00 UTC 2011
-a/kernel-firmware-2.6.37.6-noarch-2.txz:  Rebuilt.
-a/kernel-generic-2.6.37.6-x86_64-2.txz:  Rebuilt.
-a/kernel-huge-2.6.37.6-x86_64-2.txz:  Rebuilt.
-a/kernel-modules-2.6.37.6-x86_64-2.txz:  Rebuilt.
-d/kernel-headers-2.6.37.6-x86-2.txz:  Rebuilt.
-k/kernel-source-2.6.37.6-noarch-2.txz:  Rebuilt.
-  Added patch 4da9484bdece39ab0b098fa711e095e3e9fc8684 from Linus' git tree:
-    [PATCH] x86, hibernate: Initialize mmu_cr4_features during boot
-  This fixes resume from hibernate.
-testing/packages/kernel-firmware-2.6.38.2-noarch-2.txz:  Rebuilt.
-testing/packages/kernel-generic-2.6.38.2-x86_64-2.txz:  Rebuilt.
-testing/packages/kernel-headers-2.6.38.2-x86-2.txz:  Rebuilt.
-testing/packages/kernel-huge-2.6.38.2-x86_64-2.txz:  Rebuilt.
-testing/packages/kernel-modules-2.6.38.2-x86_64-2.txz:  Rebuilt.
-testing/packages/kernel-source-2.6.38.2-noarch-2.txz:  Rebuilt.
-  Added patch 4da9484bdece39ab0b098fa711e095e3e9fc8684 from Linus' git tree:
-    [PATCH] x86, hibernate: Initialize mmu_cr4_features during boot
-  This fixes resume from hibernate.
-kernels/*:  Rebuilt.
+  Upgraded to Linux kernel 3.2.26.
+  Replaced gptfdisk utilities with the rebuilt versions.
+  Added MMC support to /sbin/probe.  Thanks to David Spencer.
++--------------------------+
+Sat Aug  4 21:05:10 UTC 2012
+a/gdisk-0.6.14-x86_64-1.txz:  Removed.
+  The name of this package has been changed to "gptfdisk".
+a/gptfdisk-0.8.5-x86_64-1.txz:  Added.
+  This is the updated version of gdisk, which got a name change upstream.
+  It has added two new programs: cgfdisk, which is a menu driven GPT fdisk
+  similar to cfdisk, and fixparts, a tool for repairing corrupted GPT tables.
+  Thanks to Robert Easter for the heads-up on this.
+a/kernel-firmware-20120804git-noarch-1.txz:  Upgraded.
+ap/lm_sensors-3.3.2-x86_64-1.txz:  Upgraded.
+  Thanks to perbo on LQ, and happy first post!  :)
+d/binutils-2.22.52.0.2-x86_64-2.txz:  Rebuilt.
+  Added i386-efi-pe target, needed to compile some EFI bootloaders.
+  Thanks to Franck Barbenoire.
+x/xf86-video-nv-2.1.20-x86_64-1.txz:  Upgraded.
+  This driver was supposedly deprecated a couple of years ago, but there's a
+  new version out and so we'll upgrade since some people still use this simple
+  non-KMS driver and there's been a report of a segfault with the previous
+  version.  Thanks to Ken L.
+xap/blackbox-0.70.1-x86_64-6.txz:  Rebuilt.
+  Start dbus-launch within eval $() to prevent conflicts when XDM is used.
+  However, this still does not allow users to mount with Thunar, or to make
+  adjustments to nm-applet, and running polkit-gnome-authentication-agent-1
+  didn't help.  Maybe it's not possible to get all this FDo/XDG fluff working
+  with the minimalist WMs and I'm not sure most people using them will care
+  all that much.  A greater proportion might be unhappy to see dbus and
+  consolekit polluting the process table, to be honest.  Anyway, if someone
+  has a solution that makes all this stuff work, I'm willing to take another
+  look.  For now, at least, there's no conflict with XDM, and it's probably
+  closer to actually working than it was before.
+xap/fluxbox-1.3.2-x86_64-3.txz:  Rebuilt.
+  Start dbus-launch within eval $() to prevent conflicts when XDM is used.
+xap/fvwm-2.6.5-x86_64-3.txz:  Rebuilt.
+  Start dbus-launch within eval $() to prevent conflicts when XDM is used.
 isolinux/initrd.img:  Rebuilt.
+  Added new gptfdisk utilities.
+  Added /lib/modprobe.d/ and default blacklist files.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
+  Added new gptfdisk utilities.
+  Added /lib/modprobe.d/ and default blacklist files.
 +--------------------------+
-Mon Apr 11 07:01:40 UTC 2011
-a/apmd-3.2.2-x86_64-3.txz:  Rebuilt.
-  Removed obsolete /usr/bin/on_ac_power script.
-a/pkgtools-13.37-noarch-7.tgz:  Rebuilt.
-  Fixed installpkg where the pathname contains whitespace.
-  Thanks to Corrado Franco.
-a/shadow-4.1.4.3-x86_64-2.txz:  Rebuilt.
-  Corrected a packaging error where incorrect permissions on /usr/sbin/lastlog
-  and /usr/sbin/faillog allow any user to set login failure limits on any
-  other user (including root), potentially leading to a denial of service.
-  Thanks to pyllyukko for discovering and reporting this vulnerability.
-  (* Security fix *)
-a/sysvinit-scripts-1.2-noarch-41.txz:  Rebuilt.
-  In rc.6 and rc.K, use umount -l when unmounting remote filesystems.
-  Thanks to crocket.
-l/gdk-pixbuf2-2.23.3-x86_64-1.txz:  Upgraded.
-l/seamonkey-solibs-2.1b3-x86_64-2.txz:  Rebuilt.
-l/v4l-utils-0.8.3-x86_64-2.txz:  Rebuilt.
-  Moved 70-infrared.rules to /lib/udev/rules.d/.
+Thu Aug  2 23:16:33 UTC 2012
+a/cups-1.5.4-x86_64-1.txz:  Upgraded.
+a/util-linux-2.21.2-x86_64-4.txz:  Rebuilt.
+  Added an upstream patch to fix loop encryption in mount.
+  Thanks to Kris Karas.
+  Added back "line" utility.  Thanks to Marco Arioli.
+  Added an upstream patch to fix sector granularity in fdisk.
   Thanks to Robby Workman.
-xap/seamonkey-2.1b3-x86_64-2.txz:  Rebuilt.
-  Rebuilt from fixed upstream sources to install into the correct moz_libdir.
+ap/mysql-5.5.25a-x86_64-2.txz:  Rebuilt.
+  Change the private header installation to match what MariaDB is now doing.
+  Thanks to Heinz Wiesinger.
+kde/calligra-2.4.3-x86_64-3.txz:  Rebuilt.
+kde/okular-4.8.4-x86_64-2.txz:  Rebuilt.
+l/icu4c-49.1.2-x86_64-1.txz:  Added.
+  Thanks to Heinz Wiesinger.
+l/libwpd-0.9.4-x86_64-1.txz:  Upgraded.
+  Thanks to Heinz Wiesinger.
+l/poppler-0.20.2-x86_64-1.txz:  Upgraded.
+  Thanks to Eric Hameleers.
+xfce/tumbler-0.1.25-x86_64-2.txz:  Rebuilt.
+extra/source/java/java.SlackBuild:  Patched.
+  Fixed a missing [ that was causing jdk to be packaged with a dangling
+  symlink.  Thanks to Josiah Boothby.
++--------------------------+
+Wed Aug  1 20:24:06 UTC 2012
+a/dbus-1.4.20-x86_64-2.txz:  Rebuilt.
+  Patched rc.messagebus to restart the system D-Bus daemon even if a user
+  daemon is running (as it does now with X11 sessions).
+  Thanks to Darren Austin.
+a/sysvinit-2.88dsf-x86_64-2.txz:  Rebuilt.
+  Fixed paths.h for /etc/forcefsck and /etc/fastboot.
+  Thanks to Ken Milmore.
+a/sysvinit-scripts-2.0-noarch-5.txz:  Rebuilt.
+  Removed my convoluted /dev/root workaround in favor of a much more simple,
+  elegant solution.  Thanks to Gary Langshaw.
+e/emacs-24.1-x86_64-5.txz:  Rebuilt.
+  Recompiled --without-gsettings, which should fix runtime complaints.
+  Thanks to GazL on LQ.
+xap/xpdf-3.02pl6-x86_64-4.txz:  Rebuilt.
+  Patched to fix slow scrolling caused by a quirk exposed in newer versions
+  of gcc.  Patch by Michael Gilbert.  Thanks to LQ for pointing it out.
+extra/google-chrome/google-chrome.SlackBuild:  Modified.
+  Allow $ARCH to be preset before running the script.  This is useful for
+  systems running a 32-bit userspace under a 64-bit kernel, perhaps in a
+  chroot environment.  Thanks to Zhu Qun-Ying.
++--------------------------+
+Mon Jul 30 20:42:03 UTC 2012
+a/udev-182-x86_64-3.txz:  Rebuilt.
+  Since many people blacklist aaa_base when upgrading with slackpkg, add a
+  top-level /run directory to prevent problems.
+l/gsettings-desktop-schemas-3.4.2-x86_64-2.txz:  Rebuilt.
+  Since this requires /usr/lib64 on x86_64, the package should not be built
+  as "noarch".  Thanks to Eugene Wissner.
+l/libdbusmenu-qt-0.9.2-x86_64-2.txz:  Rebuilt.
+  Relocate documentation.
+n/curl-7.27.0-x86_64-1.txz:  Upgraded.
+n/iproute2-3.4.0-x86_64-2.txz:  Rebuilt.
+  Removed unused config files in wrong (/usr/etc) location.
+  Thanks to Lars Lindqvist.
+xap/blackbox-0.70.1-x86_64-5.txz:  Rebuilt.
+  Start D-Bus in the xinitrc.
+xap/fluxbox-1.3.2-x86_64-2.txz:  Rebuilt.
+  Start D-Bus in the xinitrc.
+xap/fvwm-2.6.5-x86_64-2.txz:  Rebuilt.
+  Start D-Bus in the xinitrc.
+xap/windowmaker-0.95.3-x86_64-2.txz:  Rebuilt.
+  Start D-Bus in the xinitrc.
+  Removed OpenSUSE menu.
+xfce/xfce4-systemload-plugin-1.1.1-x86_64-1.txz:  Upgraded.
+extra/source/java/*:  Added.
+  Added a script to repackage Oracle's Java JRE or JDK as a Slackware package.
++--------------------------+
+Fri Jul 27 17:15:24 UTC 2012
+a/util-linux-2.21.2-x86_64-3.txz:  Rebuilt.
+  Use /bin/hostname from the git version of net-tools.
+e/emacs-24.1-x86_64-4.txz:  Rebuilt.
+  Fixed ./configure, which needed --without-gconf, not --disable-gconf.
+kde/calligra-2.4.3-x86_64-2.txz:  Rebuilt.
+kde/gwenview-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kde-baseapps-4.8.4-x86_64-2.txz:  Rebuilt.
+  Fixed missing /etc/profile.d/kde.{sh,csh} scripts.
+kde/kde-runtime-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kdeartwork-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kdegraphics-thumbnailers-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kdeplasma-addons-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/libkexiv2-4.8.4-x86_64-2.txz:  Rebuilt.
+l/exiv2-0.23-x86_64-1.txz:  Upgraded.
+  This bumps the shared library version, requiring more rebuilds.
+l/strigi-0.7.7-x86_64-2.txz:  Rebuilt.
+n/bind-9.9.1_P2-x86_64-1.txz:  Upgraded.
+  Prevents a named assert (crash) when validating caused by using
+  "Bad cache" data before it has been initialized.  [RT #30025]
+  ISC_QUEUE handling for recursive clients was updated to address a
+  race condition that could cause a memory leak.  This rarely occurred
+  with UDP clients, but could be a significant problem for a server
+  handling a steady rate of TCP queries.  [RT #29539 & #30233]
+  Under heavy incoming TCP query loads named could experience a
+  memory leak which could lead to significant reductions in query
+  response or cause the server to be terminated on systems with
+  "out of memory" killers. [RT #29539]
+  A condition has been corrected where improper handling of zero-length
+  RDATA could cause undesirable behavior, including termination of
+  the named process.  [RT #29644]
+  (* Security fix *)
+n/net-tools-1.60.20120726git-x86_64-1.txz:  Upgraded.
+  ifconfig was broken when using CIDR notation, fixed by switching to the
+  git version of net-tools.  Thanks to Igor Alov.
+xap/geeqie-1.0-x86_64-4.txz:  Rebuilt.
 isolinux/initrd.img:  Rebuilt.
-  Allow adjusting user filesystem access level for FAT partitions.
-  Thanks to Andrzej Szelachowski.
+  Fixed missing space in SeTnet.  Thanks to John Pullan.
+  Use -s option for eject.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Allow adjusting user filesystem access level for FAT partitions.
-  Thanks to Andrzej Szelachowski.
-testing/packages/mesa-7.10.2-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Apr  8 06:58:48 UTC 2011
-Hi folks,
-One more.  We'll call this 13.37 RC 4.6692.  Thanks to Nicola for suggesting
-the first Feigenbaum constant could be useful since we used pi, and it's too
-late for e.  This is pretty much it, but last call for any showstoppers.
-a/dosfstools-3.0.11-x86_64-2.txz:  Rebuilt.
-  Added /sbin/fsck.* symlinks.
-  Thanks to Andrzej Szelachowski.
-a/kernel-firmware-2.6.37.6-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.37.6-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.37.6-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.37.6-x86_64-1.txz:  Upgraded.
-a/pkgtools-13.37-noarch-6.tgz:  Rebuilt.
-  Corrected the cutoff points for converting uncompressed package size
-  from kilobytes to megabytes in installpkg.
-  Thanks to Audrius Kazukauskas for pointing out the bug.
-  Get correct size when installing a symlink to a package.
-  Thanks to chrisretusn on LQ for the bug report and analysis.
-d/gdb-7.2-x86_64-2.txz:  Rebuilt.
-  Disabled --with-python (not yet working).
-  Thanks to Thorsten Mühlfelder.
-d/kernel-headers-2.6.37.6-x86-1.txz:  Upgraded.
-k/kernel-source-2.6.37.6-noarch-1.txz:  Upgraded.
-l/djvulibre-3.5.24-x86_64-1.txz:  Upgraded.
-  Thanks to Mikhail Zotov.
-l/libtiff-3.9.4-x86_64-2.txz:  Rebuilt.
-  Patched overflows that could lead to arbitrary code execution when parsing
-  a malformed image file.
+  Fixed missing space in SeTnet.  Thanks to John Pullan.
+  Use -s option for eject.
++--------------------------+
+Wed Jul 25 02:02:40 UTC 2012
+a/ed-1.6-x86_64-1.txz:  Upgraded.
+a/etc-13.013-x86_64-2.txz:  Rebuilt.
+  Get rid of broken /etc/skel/.xsession.  Thanks to GazL.
+a/logrotate-3.8.1-x86_64-2.txz:  Rebuilt.
+  Fixed cron script to not log an error when there wasn't one.
+  Thanks to NoStressHQ and GazL on LQ.
+a/sysvinit-scripts-2.0-noarch-4.txz:  Rebuilt.
+  Fixed rc.S to handle /dev/root properly in cases where /etc/fstab contains
+  CIFS volumes (and lines start with //).  Thanks to John.
+a/udev-182-x86_64-2.txz:  Rebuilt.
+  Add another sanity check to rc.udev to warn if CONFIG_DEVTMPFS and
+  CONFIG_DEVTMPFS_MOUNT are not enabled in the kernel.
+ap/zsh-5.0.0-x86_64-1.txz:  Upgraded.
+e/emacs-24.1-x86_64-3.txz:  Rebuilt.
+  Don't use GConf.
+l/gvfs-1.12.3-x86_64-2.txz:  Rebuilt.
+  Don't restart D-Bus in the installation script.  It causes errors from
+  the installer, and is no longer needed anyway since D-Bus notices
+  changed configuration without a reload.
+  Don't automount network volumes (causes a long startup delay in Thunar).
+l/libpng-1.4.12-x86_64-1.txz:  Upgraded.
+  Fixed incorrect type (int copy should be png_size_t copy) in png_inflate()
+  (fixes CVE-2011-3045).
+  Revised png_set_text_2() to avoid potential memory corruption (fixes
+    CVE-2011-3048).
+  Changed "a+w" to "u+w" in Makefile.in to fix CVE-2012-3386.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0192
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1167
-  (* Security fix *)
-l/seamonkey-solibs-2.1b3-x86_64-1.txz:  Upgraded.
-x/xkeyboard-config-2.2.1-noarch-1.txz:  Upgraded.
-  Thanks to Didier Spaier for getting this in under the wire.
-xap/seamonkey-2.1b3-x86_64-1.txz:  Upgraded.
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3045
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3048
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3386
+  (* Security fix *)
+xap/network-manager-applet-0.9.4.1-x86_64-2.txz:  Rebuilt.
+  Use GTK+2 for the UI, not GTK+3 (better theme matching).
+xfce/xfce4-weather-plugin-0.8.0-x86_64-1.txz:  Upgraded.
+xfce/xfwm4-4.10.0-x86_64-2.txz:  Rebuilt.
+  Modified xinitrc.xfce to handle system-wide .Xresources and .Xmodmap.
+  Launch startxfce4 using ck-launch-session and/or dbus-launch to fix problems
+  with using XDM.  This same approach should also help Thunar on other window
+  managers.  Let me know if there are any issues, as I'll likely be applying
+  these changes to the other xinitrc files.  Thanks to GazL on LQ.
+extra/bash-completion/bash-completion-2.0-noarch-2.txz:  Rebuilt.
+  Updated the slackpkg and slapt-get completions for the XFCE series.
+  Thanks to Igor Murzov.
++--------------------------+
+Sun Jul 22 22:38:36 UTC 2012
+Howdy!  Lots of shiny stuff here, including the long awaited Xfce 4.10!
+Thanks to Robby Workman for the initial set of build scripts, and lots
+of testing (plus some very helpful notes about things such as the proper
+build order).  I'm calling this a beta (finally!), and it's really very
+close to what we expect to release.  Test away.
+BTW, Mercury leaves retrograde on August 8th, position 01:26 Leo.  ;-)
+a/aaa_elflibs-14.0-x86_64-3.txz:  Rebuilt.
+  Fixed missing libz.so.1.
+a/lvm2-2.02.96-x86_64-4.txz:  Rebuilt.
+  Recompiled for udev-182.
+a/sysvinit-scripts-2.0-noarch-3.txz:  Rebuilt.
+  Show the date after setting the system clock.
+  Thanks to Darrell Anderson.
+  Shut down udev in rc.6.  Thanks to Robby Workman.
+  In rc.S, determine the actual root partition and insert it into /etc/mtab
+  so that "/dev/root" isn't shown when booting a kernel without an initrd.
+  I should have fixed this years ago.
+a/udev-182-x86_64-1.txz:  Upgraded.
+  Well, udev in this devel cycle has certainly been interesting!  A fair
+  number of odd bug reports have been coming in, and we hadn't really been
+  able to get a handle on the source of the issues.  Quite some time ago
+  we started testing udev-182, and noticed that it caused some issues with
+  the persistent net and cd rules.  There'd sometimes be two entries per
+  device, so a machine with a single Ethernet card might come up showing the
+  card as eth1, with two rules in 70-persistent-net.rules (eth0 and eth1).
+  We tested a lot of udev versions trying to determine where the problem
+  started, and it seemed to begin with version 176, the first one that
+  used libkmod rather than calling out to module-init-tools to load modules.
+  Asking upstream about it, they suggested that we just turn the generation
+  of persistent rules off.  They'd already turned it off by default.  "Make
+  'em make rules!" seemed to be the answer, and since I remember well why
+  the autogeneration of net and CD rules came about, I wasn't really happy
+  with that answer.  After deploying the "safe" upgrade to 175, we got a
+  couple of reports of this same issue happening (though none of us could
+  reproduce the issue with 175).  Robby ended up making some patches to
+  the rule writing scripts for udev-182 that were able to stop the doubling
+  up of rules, but the devices themselves would still be misnumbered on the
+  first boot without rules, and would then be correct after a reboot.
+    Last week I sat down determined to figure out where the race condition
+  was.  After endless reboots with various tests, I got the idea to put my
+  network modules on the initrd and have it shell out so that I could take
+  a look at them.  What I found was that the rules were generated correctly
+  on the initrd.  Well, that was a surprise, but I must have had some kind
+  of hunch to even try a test like that.  On another hunch, I ran
+  "pstree -c -p | grep udevd" on the running system.  Heh.  There it was.
+  We had been running two copies of udevd, and they were fighting it out.
+  At some point along the line, udevd was changed.  It used to be that if
+  you tried to start a second copy it wouldn't start, and would exit with
+  status 1, and our rc.udev script relied on this behavior.  Fixing the
+  problem was considerably easier than finding it...  rworkman and I made
+  some changes in rc.udev to check if udevd was already running instead
+  of expecting it to check for itself.  Another change was required to
+  cause it to write out rules if they didn't exist already, and then to
+  read them back in (otherwise optical symlinks were still missing on first
+  boot without rules).  There's still one issue that was also present with
+  udev-175, which is that a hotplugged optical drive won't get symlinks
+  unless it has been in at boot and had rules generated for it then.
+  Otherwise, things are looking considerably better.  Firmware is loading
+  correctly, rules are autogenerated properly again, and several devices
+  that were missing in /dev have returned.
+    So, there's the story.  Maybe more than you really wanted to know.  ;-)
+  Thanks to rworkman for his help on this.  Please report any new problems.
+  And if anyone knows how to get symlinks working for a hotplugged optical
+  drive like they did in udev-165, a fix would be most appreciated.
+a/udisks2-1.98.0-x86_64-1.txz:  Added.
+ap/foomatic-filters-4.0.12-x86_64-1.txz:  Upgraded.
+ap/gutenprint-5.2.9-x86_64-1.txz:  Upgraded.
+ap/slackpkg-2.82.0-noarch-6.tgz:  Rebuilt.
+  Support XFCE series.  Note that slackpkg will upgrade itself, but it still
+  won't know about the XFCE series during that run, so you'll need to run it
+  a second time to install Xfce.
+l/GConf-3.2.5-x86_64-1.txz:  Added.
+l/gcr-3.4.1-x86_64-1.txz:  Added.
+l/glade3-3.8.1-x86_64-1.txz:  Added.
+l/glib-networking-2.32.3-x86_64-1.txz:  Added.
+l/gnome-keyring-3.4.1-x86_64-1.txz:  Added.
+l/gsettings-desktop-schemas-3.4.2-noarch-1.txz:  Added.
+l/gvfs-1.12.3-x86_64-1.txz:  Added.
+l/js185-1.0.0-x86_64-1.txz:  Added.
+l/keybinder-0.3.0-x86_64-1.txz:  Added.
+l/libcanberra-0.29-x86_64-1.txz:  Added.
+l/libgnome-keyring-3.4.1-x86_64-1.txz:  Added.
+l/libproxy-0.4.7-x86_64-1.txz:  Added.
+l/libsoup-2.38.1-x86_64-1.txz:  Added.
+l/libtasn1-2.12-x86_64-1.txz:  Added.
+l/loudmouth-1.4.3-x86_64-3.txz:  Rebuilt.
+  Rebuilt with --enable-debug=yes, which I hear disables debugging messages on
+  the console.  Go figure.  :-)  Thanks to Youjie Zhou.
+l/media-player-info-17-noarch-1.txz:  Added.
+l/mozilla-nss-3.13.5-x86_64-2.txz:  Rebuilt.
+  Added nspr-config and nss-config.
+  Removed unneeded binaries in /usr/bin.
+  Removed config files in /usr/include/nspr/md.
+l/sound-theme-freedesktop-0.7-noarch-1.txz:  Added.
+n/php-5.4.5-x86_64-1.txz:  Upgraded.
+  Fixed potential overflow in _php_stream_scandir (CVE-2012-2688).
+  (Thanks to Jason Powell, Stas)
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2688
+  (* Security fix *)
+xap/network-manager-applet-0.9.4.1-x86_64-1.txz:  Added.
+xap/xfce-4.6.2-x86_64-5.txz:  Removed.
+xfce/Terminal-0.4.8-x86_64-1.txz:  Added.
+xfce/Thunar-1.4.0-x86_64-1.txz:  Added.
+xfce/exo-0.8.0-x86_64-1.txz:  Added.
+xfce/garcon-0.2.0-x86_64-1.txz:  Added.
+xfce/gtk-xfce-engine-3.0.0-x86_64-1.txz:  Added.
+xfce/libxfce4ui-4.10.0-x86_64-1.txz:  Added.
+xfce/libxfce4util-4.10.0-x86_64-1.txz:  Added.
+xfce/libxfcegui4-4.10.0-x86_64-1.txz:  Added.
+xfce/orage-4.8.3-x86_64-1.txz:  Added.
+xfce/thunar-volman-0.8.0-x86_64-1.txz:  Upgraded.
+xfce/tumbler-0.1.25-x86_64-1.txz:  Added.
+xfce/xfce4-appfinder-4.10.0-x86_64-1.txz:  Added.
+xfce/xfce4-clipman-plugin-1.2.3-x86_64-1.txz:  Added.
+xfce/xfce4-dev-tools-4.10.0-x86_64-1.txz:  Added.
+xfce/xfce4-mixer-4.8.0-x86_64-1.txz:  Added.
+xfce/xfce4-notifyd-0.2.2-x86_64-1.txz:  Upgraded.
+xfce/xfce4-panel-4.10.0-x86_64-1.txz:  Added.
+xfce/xfce4-power-manager-1.2.0-x86_64-1.txz:  Upgraded.
+xfce/xfce4-screenshooter-1.8.1-x86_64-1.txz:  Added.
+xfce/xfce4-session-4.10.0-x86_64-1.txz:  Added.
+xfce/xfce4-settings-4.10.0-x86_64-1.txz:  Added.
+xfce/xfce4-systemload-plugin-1.1.0-x86_64-1.txz:  Added.
+xfce/xfce4-taskmanager-1.0.0-x86_64-1.txz:  Added.
+xfce/xfce4-volumed-0.1.13-x86_64-1.txz:  Added.
+xfce/xfce4-weather-plugin-0.7.4-x86_64-1.txz:  Added.
+xfce/xfconf-4.10.0-x86_64-1.txz:  Added.
+xfce/xfdesktop-4.10.0-x86_64-1.txz:  Added.
+xfce/xfwm4-4.10.0-x86_64-1.txz:  Added.
+xfce/xfwm4-themes-4.10.0-x86_64-1.txz:  Added.
 isolinux/initrd.img:  Rebuilt.
-kernels/*:  Upgraded.
+  Support XFCE series.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-testing/packages/kernel-firmware-2.6.38.2-noarch-1.txz:  Added.
-testing/packages/kernel-generic-2.6.38.2-x86_64-1.txz:  Added.
-testing/packages/kernel-headers-2.6.38.2-x86-1.txz:  Added.
-testing/packages/kernel-huge-2.6.38.2-x86_64-1.txz:  Added.
-testing/packages/kernel-modules-2.6.38.2-x86_64-1.txz:  Added.
-testing/packages/kernel-source-2.6.38.2-noarch-1.txz:  Added.
-testing/source/linux-2.6.38.2-configs/:  Rebuilt.
-  PREEMPT_VOLUNTARY y -> n
-testing/source/linux-2.6.39-rc2-configs/:  Rebuilt.
-  PREEMPT_VOLUNTARY y -> n
-+--------------------------+
-Thu Apr  7 04:07:29 UTC 2011
-a/mdadm-3.1.5-x86_64-1.txz:  Upgraded.
-a/pkgtools-13.37-noarch-5.tgz:  Rebuilt.
-  Use du -sh to calculate package sizes.
-l/pango-1.28.4-x86_64-1.txz:  Upgraded.
-n/dhcp-4.2.1_P1-x86_64-1.txz:  Upgraded.
-  In dhclient, check the data for some string options for reasonableness
-  before passing it along to the script that interfaces with the OS.
-  This prevents some possible attacks by a hostile DHCP server.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0997
-  (* Security fix *)
-testing/source/linux-2.6.38.2-configs/:  Upgraded.
-testing/source/linux-2.6.39-rc2-configs/:  Upgraded.
-+--------------------------+
-Wed Apr  6 05:43:45 UTC 2011
-a/pkgtools-13.37-noarch-4.tgz:  Rebuilt.
-  Patched to work around a possible bug calculating package size.
-a/xz-5.0.2-x86_64-1.tgz:  Upgraded.
-ap/mysql-5.1.56-x86_64-1.txz:  Upgraded.
-kde/kdevelop-4.2.2-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.2.2-x86_64-1.txz:  Upgraded.
-l/poppler-0.16.4-x86_64-1.txz:  Upgraded.
-x/libX11-1.4.3-x86_64-1.txz:  Upgraded.
-x/util-macros-1.13.0-noarch-1.txz:  Upgraded.
-x/xorg-sgml-doctools-1.7-x86_64-1.txz:  Upgraded.
-x/xrdb-1.0.9-x86_64-1.txz:  Upgraded.
-  This fixes a security issue where improperly sanitized input could lead to
-  privilege escalation or arbitrary command execution as root.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0465
-  (* Security fix *)
-+--------------------------+
-Tue Apr  5 06:35:07 UTC 2011
-a/aaa_elflibs-13.37-x86_64-5.txz:  Rebuilt.
-a/mkinitrd-1.4.6-x86_64-11.txz:  Rebuilt.
-  Copy kernel modules even if they already exist in the initrd-tree.
-ap/slackpkg-2.82.0-noarch-5.tgz:  Rebuilt.
-  Patched a couple of regex bugs.
-  Thanks to David Somero and Piter Punk.
-kde/kdebase-4.5.5-x86_64-3.txz:  Rebuilt.
-  Patched kconsole to fix closing tabs.
-  Thanks to Vincent Batts.
-kde/kdevelop-4.2.1-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.2.1-x86_64-1.txz:  Upgraded.
-l/mpfr-3.0.1-x86_64-1.txz:  Upgraded.
-l/ncurses-5.9-x86_64-1.txz:  Upgraded.
-n/fetchmail-6.3.19-x86_64-1.txz:  Upgraded.
-n/getmail-4.20.0-x86_64-1.txz:  Upgraded.
-n/proftpd-1.3.3e-x86_64-1.txz:  Upgraded.
-  Fixes CVE-2011-1137 (badly formed SSH messages cause DoS).
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1137
-  (* Security fix *)
-n/stunnel-4.35-x86_64-1.txz:  Upgraded.
-  Thanks to Cal Peake for the last minute reminder.
-xap/xxgdb-1.12-x86_64-3.txz:  Rebuilt.
-  Merged many bugfix patches.
+  Support XFCE series.
++--------------------------+
+Wed Jul 18 20:21:15 UTC 2012
+l/hicolor-icon-theme-0.12-noarch-2.txz:  Rebuilt.
+  Don't update (create) icon theme caches unless they exist already.
+  Once created, these icon registries cause problems unless they are
+  rebuilt every time new icons are added.  If you have any
+  icon-theme.cache files under /usr/share/icons, it would be a good
+  idea to get rid of them (unless you're planning to handle keeping
+  them up to date).
+n/gpa-0.9.2-x86_64-1.txz:  Upgraded.
+n/iputils-s20101006-x86_64-2.txz:  Rebuilt.
+xap/MPlayer-1.1_20120701-x86_64-2.txz:  Rebuilt.
+  Don't update (create) icon theme caches unless they exist already.
+  Once created, these icon registries cause problems unless they are
+  rebuilt every time new icons are added.  If you have any
+  icon-theme.cache files under /usr/share/icons, it would be a good
+  idea to get rid of them (unless you're planning to handle keeping
+  them up to date).
++--------------------------+
+Wed Jul 18 05:35:26 UTC 2012
+a/mkinitrd-1.4.7-x86_64-4.txz:  Rebuilt.
+  Added support for compressed kernel modules.
   Thanks to Stuart Winter.
+kde/kdepimlibs-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/perlqt-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/qtruby-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/rocs-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/smokeqt-4.8.4-x86_64-2.txz:  Rebuilt.
+l/fribidi-0.19.2-x86_64-2.txz:  Rebuilt.
+  Patched headers for compatibility with the new glib2 package.
+  Thanks to Darrell Anderson.
+l/gst-plugins-good-0.10.31-x86_64-2.txz:  Rebuilt.
+l/hal-0.5.14-x86_64-3.txz:  Removed.
+l/hal-info-20091130-noarch-1.txz:  Removed.
+l/libexif-0.6.21-x86_64-1.txz:  Upgraded.
+  This update fixes a number of remotely exploitable issues in libexif
+   with effects ranging from information leakage to potential remote
+   code execution. 
+  For more information, see:
+    http://sourceforge.net/mailarchive/message.php?msg_id=29534027
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2812
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2813
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2814
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2836
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2837
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2840
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2841
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2845
+  (* Security fix *)
+l/libgphoto2-2.4.14-x86_64-2.txz:  Rebuilt.
+l/libvisual-0.4.0-x86_64-3.txz:  Rebuilt.
+  Patched header for compatibility with the new glib2 package.
+  Thanks to Darrell Anderson.
+l/seamonkey-solibs-2.11-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+l/wv2-0.4.2-x86_64-1.txz:  Removed.
+  Calligra doesn't require this (it bundles a forked version), nor does
+  anything else in Slackware.  It is unmaintained upstream and requires
+  patching to compile with the recent glib2.  Perhaps SlackBuilds.org
+  should take it over?  If so, change all occurances of:
+  #include <glib/*> to #include <glib.h>
+n/net-snmp-5.6.1-x86_64-5.txz:  Rebuilt.
+xap/mozilla-firefox-14.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+xap/mozilla-thunderbird-14.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+xap/seamonkey-2.11-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
 +--------------------------+
-Mon Apr  4 06:35:15 UTC 2011
-a/dialog-1.1_20100428-x86_64-2.txz:  Rebuilt.
-ap/vim-7.3.154-x86_64-1.txz:  Upgraded.
-d/git-1.7.4.3-x86_64-1.txz:  Upgraded.
-d/mercurial-1.8.2-x86_64-1.txz:  Upgraded.
-l/glib2-2.28.5-x86_64-1.txz:  Upgraded.
-l/libgsf-1.14.20-x86_64-1.txz:  Upgraded.
-l/v4l-utils-0.8.3-x86_64-1.txz:  Upgraded.
-xap/vim-gvim-7.3.154-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sun Apr  3 05:50:28 UTC 2011
-ap/madplay-0.15.2b-x86_64-3.txz:  Rebuilt.
-  Patched to fix crash on x86_64.
-  Thanks to Kris Karas.
-ap/sox-14.3.2-x86_64-1.txz:  Upgraded.
-l/gtk+2-2.24.4-x86_64-1.txz:  Upgraded.
-n/php-5.3.6-x86_64-5.txz:  Rebuilt.
-  Added --with-sqlite3=shared.
-  Thanks to Stuart Winter.
-x/compiz-0.8.8-x86_64-1.txz:  Upgraded.
-extra/google-chrome/google-chrome-pam-solibs-1.1.3-x86_64-1.txz:  Added.
-  This is libpam.so.0, needed to make beta and unstable builds of Chrome happy.
-  PAM's first appearance here.  I should have had this ready on Friday, sorry.
-testing/source/linux-2.6.39-rc1-configs/:  Added.
-+--------------------------+
-Fri Apr  1 03:32:38 UTC 2011
-ap/slackpkg-2.82.0-noarch-4.tgz:  Rebuilt.
-  Updated mirrors, allow blank lines in blacklist, better regex docs.
-  Thanks to Piter Punk.
-ap/sqlite-3.7.5-x86_64-1.txz:  Upgraded.
-xap/xpdf-3.02pl6-x86_64-3.txz:  Rebuilt.
-  Added --without-t1-library.
-  Thanks to Petri Kaukasoina.
-+--------------------------+
-Thu Mar 31 04:49:05 UTC 2011
-kde/polkit-kde-1-r1145544-x86_64-2.txz:  Rebuilt.
-  Patched to prevent an annoying crash report at logout/shutdown.
-l/t1lib-5.1.2-x86_64-2.txz:  Added.
-  Well, it looks as if this library is less obsolete than was rumored, so
-  we've added it back for the time being.  Eventually most things will be
-  converted to use Freetype or other libraries, but until then...
-n/bluez-4.91-x86_64-1.txz:  Upgraded.
-n/php-5.3.6-x86_64-4.txz:  Rebuilt.
-  Restored --with-t1lib=/usr.
-xap/xpdf-3.02pl6-x86_64-2.txz:  Rebuilt.
-  Removed t1lib mention from slack-desc.
-+--------------------------+
-Tue Mar 29 22:58:09 UTC 2011
-a/aaa_elflibs-13.37-x86_64-4.txz:  Rebuilt.
-a/jfsutils-1.1.15-x86_64-1.txz:  Upgraded.
-a/mkinitrd-1.4.6-x86_64-10.txz:  Rebuilt.
-  Fixed unify_libs() function and loop.
-  Thanks to Francisco Ambrozio and zux for the bug report,
-  and Eric Hameleers for the patch.
-a/procps-3.2.8-x86_64-3.txz:  Rebuilt.
-  Patched to avoid "Unknown HZ value!" at boot.
-  Thanks to Audrius Kazukauskas.
-l/t1lib-5.1.2-x86_64-1.txz:  Removed.
-  There is little use these days for Type 1 fonts and the library is not
-  maintained.  If anyone really needs this, fetch it from Slackware 13.1.
-n/curl-7.21.4-x86_64-1.txz:  Upgraded.
-  Fixes PHP curl extension.
-  Thanks to Korneliusz Jarzebski.
-n/openvpn-2.1.4-x86_64-2.txz:  Rebuilt.
-  Added --enable-iproute2.  Thanks to crocket.
-n/php-5.3.6-x86_64-3.txz:  Rebuilt.
-  Removed --with-t1lib=/usr.
-xap/xfce-4.6.2-x86_64-5.txz:  Rebuilt.
-  In Thunar, do not consider files ending in ~ to be hidden.
-  Thanks to Robby Workman.
-xap/xpdf-3.02pl6-x86_64-1.txz:  Upgraded.
-  Rebuilt without t1lib.
-  Thanks to Petri Kaukasoina.
-+--------------------------+
-Tue Mar 29 05:46:13 UTC 2011
-a/btrfs-progs-20110327-x86_64-1.txz:  Upgraded.
-  In fsck.btrfs script, don't check a filesystem that's mounted as /, even if
-  it is mounted read-only.  This fix allows using btrfs as a root filesystem,
-  but /boot will still need to be on another partition using ext2 (or some
-  other filesystem) as btrfs is tricky to boot directly.
-  Thanks to gerasimos_h.
-a/mkinitrd-1.4.6-x86_64-9.txz:  Rebuilt.
-  Avoid an infinite loop copying libraries to the initrd-tree in the case that
-  preload or LD_PRELOAD are used.
-  Thanks to David Somero and Ozan Türkyilmaz for the bug report.
-  Thanks to Eric Hameleers for the patch.
-a/procps-3.2.8-x86_64-2.txz:  Rebuilt.
-  Patched to support cgroups.
-  Upgraded to psmisc-22.13.
-ap/vim-7.3.146-x86_64-1.txz:  Upgraded.
-  Updated runtime syntax.
-d/git-1.7.4.2-x86_64-1.txz:  Upgraded.
-kde/kdelibs-4.5.5-x86_64-2.txz:  Rebuilt.
-  Patched CVE-2011-1168.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1168
-  (* Security fix *)
-l/chmlib-0.40-x86_64-2.txz:  Rebuilt.
-  Enabled building the example programs.
-l/glib2-2.28.4-x86_64-1.txz:  Upgraded.
-  Fixed setenv syntax in /etc/profile.d/libglib2.csh.
-  Thanks to crocket.
-xap/vim-gvim-7.3.146-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sun Mar 27 08:28:47 UTC 2011
-There have been quite a few changes so we will have one more release
-candidate:  Slackware 13.37 RC 3.14159265358979323846264338327950288419716.
-Very close now!  But we'll likely hold out for 2.6.37.6.
-a/aaa_base-13.37-x86_64-3.txz:  Rebuilt.
-  Fixed a dangling /var/X11 symlink on a fresh installation.
-  Thanks to Joerg Germeroth.
-a/aaa_elflibs-13.37-x86_64-3.txz:  Rebuilt.
-a/btrfs-progs-20110322-x86_64-1.txz:  Upgraded.
-  Added fsck.btrfs script to fix problem with fsck at boot.
-  Thanks to gerasimos_h for the bug report.
-a/glibc-solibs-2.13-x86_64-4.txz:  Rebuilt.
-a/glibc-zoneinfo-2.13-noarch-4.txz:  Rebuilt.
-a/kernel-firmware-2.6.37.5-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.37.5-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.37.5-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.37.5-x86_64-1.txz:  Upgraded.
-a/lilo-22.8-x86_64-16.txz:  Rebuilt.
-  In liloconfig, make vga=normal the default choice, and add vga=ask.
-  Use a menu rather than an inputbox to choose Linux partitions in expert mode.
-  Thanks to bukhansky.
-a/mkinitrd-1.4.6-x86_64-8.txz:  Rebuilt.
-  Allow relative paths for -s option.
-  Thanks to GazL on LQ.
-  Upgraded to busybox-1.18.4.
-a/openssl-solibs-0.9.8r-x86_64-3.txz:  Rebuilt.
-a/shadow-4.1.4.3-x86_64-1.txz:  Upgraded.
-  This release fixes a security issue where local users may be able to add
-  themselves to NIS groups through chfn and chsh.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0721
-  (* Security fix *)
-  Thanks to Gary Langshaw for collecting important additional patches from svn.
-a/sysvinit-scripts-1.2-noarch-40.txz:  Rebuilt.
-  In /etc/inittab.new open tty1-6 for all of runlevels 1-5.
-a/xfsprogs-3.1.4-x86_64-1.txz:  Upgraded.
-ap/hplip-3.11.3a-x86_64-1.txz:  Upgraded.
-ap/man-1.6g-x86_64-1.txz:  Upgraded.
-ap/slackpkg-2.82.0-noarch-2.tgz:  Upgraded.
-  Added Slackware 13.37 mirrors.
-  Thanks to Piter Punk.
-ap/vim-7.3.143-x86_64-1.txz:  Upgraded.
-d/kernel-headers-2.6.37.5-x86-1.txz:  Upgraded.
-k/kernel-source-2.6.37.5-noarch-1.txz:  Upgraded.
-kde/kdegraphics-4.5.5-x86_64-3.txz:  Rebuilt.
-  Recompiled against poppler-0.16.3.
-kde/koffice-2.3.3-x86_64-2.txz:  Rebuilt.
-  Recompiled against poppler-0.16.3.
-l/QScintilla-2.4.5-x86_64-2.txz:  Rebuilt.
-  Recompiled to update the sip module API.
-  Thanks to David Somero.
-l/akonadi-1.4.1-x86_64-3.txz:  Rebuilt.
-  Fixed sqlite3 plugin path.
-  Thanks to Kris Karas.
-l/glibc-2.13-x86_64-4.txz:  Rebuilt.
-l/glibc-i18n-2.13-x86_64-4.txz:  Rebuilt.
-l/glibc-profile-2.13-x86_64-4.txz:  Rebuilt.
-l/gst-plugins-good-0.10.28-x86_64-1.txz:  Upgraded.
-l/libelf-0.8.13-x86_64-2.txz:  Rebuilt.
-  Enabled the static library.
-  Thanks to Ozan Türkyilmaz.
-l/libusb-1.0.8-x86_64-2.txz:  Rebuilt.
-  Patched debug log level.
-  Thanks to Heinz Wiesinger for a link to a patch.
-l/pcre-8.12-x86_64-1.txz:  Upgraded.
-l/poppler-0.16.3-x86_64-1.txz:  Upgraded.
-  This (again) bumps the major number of the library requiring everything that
-  uses it to be recompiled.  :/  Probably a good idea to upgrade though.
-l/qt-4.7.0_7abde40-x86_64-3.txz:  Rebuilt.
-  Fixed .la and .pc files to remove incorrect references to -ljscore and
-  -L../JavaScriptCore/release.
-  Thanks to Niels Horn.
-  Blacklisted several invalid HTTPS certificates.
-  For more information, see:
-    http://www.comodo.com/Comodo-Fraud-Incident-2011-03-23.html
-  (* Security fix *)
-l/seamonkey-solibs-2.1b2-x86_64-2.txz:  Rebuilt.
-n/bind-9.7.3-x86_64-2.txz:  Rebuilt.
-  Recompiled to link with idnkit.
-  Thanks to Tobias Poschwatta.
-n/bluez-4.90-x86_64-1.txz:  Upgraded.
-n/dhcp-4.2.1-x86_64-2.txz:  Rebuilt.
-  Create empty leases files in the package.
-  Thanks to Stéphane Berthelot.
-n/ethtool-2.6.36-x86_64-1.txz:  Upgraded.
-  Thanks to Luiz Gustavo Zuliani for testing ethtool, iputils, mtr, and
-  traceroute updates and making sure they were bumped in time for 13.37.
-n/idnkit-1.0-x86_64-1.txz:  Added.
-  The idnkit package supports internationalized domain names.
-n/iputils-s20101006-x86_64-1.txz:  Upgraded.
-n/mtr-0.80-x86_64-1.txz:  Upgraded.
-n/openssl-0.9.8r-x86_64-3.txz:  Rebuilt.
-  Fixed installation of certwatch.new.
-  Thanks to Thom1b on LQ.
-n/rsync-3.0.8-x86_64-1.txz:  Upgraded.
-n/traceroute-2.0.17-x86_64-1.txz:  Upgraded.
-n/whois-5.0.11-x86_64-1.txz:  Upgraded.
-x/libXi-1.4.2-x86_64-1.txz:  Upgraded.
-x/liberation-fonts-ttf-1.06.0.20100721-noarch-3.txz:  Rebuilt.
-  Brought back the 60-liberation.conf with Courier New added.
-x/xproto-7.0.21-noarch-1.txz:  Upgraded.
-xap/gimp-2.6.11-x86_64-3.txz:  Rebuilt.
-  Recompiled against poppler-0.16.3.
-xap/mozilla-firefox-4.0-x86_64-2.txz:  Rebuilt.
-  Use --enable-startup-notification.
-  Thanks to V'yacheslav Stetskevych.
-xap/mozilla-thunderbird-3.1.9-x86_64-2.txz:  Rebuilt.
-  Use --enable-startup-notification.
-  Thanks to V'yacheslav Stetskevych.
-xap/seamonkey-2.1b2-x86_64-2.txz:  Rebuilt.
-  This patches a security vulnerability by blacklisting several invalid
-  HTTPS certificates.
-  For more information, see:
-    http://www.mozilla.org/security/announce/2011/mfsa2011-11.html
-  (* Security fix *)
-xap/vim-gvim-7.3.143-x86_64-1.txz:  Upgraded.
+Tue Jul 17 00:21:46 UTC 2012
+a/mkinitrd-1.4.7-x86_64-3.txz:  Rebuilt.
+  Issue /sbin/ldconfig differently to avoid linking to old library versions
+  that might be present on the system.
 isolinux/initrd.img:  Rebuilt.
-  Added memtest86+.  Thanks to Harka Jinen.
-  Improved RAID partition scanning.
-  Thanks to Sander de Jong and Csaba Biegl.
-  Added virtio kernel modules.
-  Thanks to Mario De Chenno.
-kernels/*:  Upgraded.
+  Use fixed 13-dm-disk.rules.
+  Added top-level /run directory.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Added memtest86+.  Thanks to Harka Jinen.
-  Improved RAID partition scanning.
-  Thanks to Sander de Jong and Csaba Biegl.
-  Added virtio kernel modules.
-  Thanks to Mario De Chenno.
-testing/source/linux-2.6.38.1-configs/:  Upgraded.
-+--------------------------+
-Tue Mar 22 06:59:13 UTC 2011
-We'll call this Slackware 13.37 release candidate 3.  It seems like most of the
-important pieces are in place now.  :-)
-a/mkinitrd-1.4.6-x86_64-7.txz:  Rebuilt.
-  Use "mdadm -S -s" in the init script to fix device numbers.
-  Thanks to Eric Hameleers.
-  Poke the kernel with fdisk after assembling RAID.
-  Thanks to Csaba Biegl.
-a/sysvinit-scripts-1.2-noarch-39.txz:  Rebuilt.
-  In rc.6 and rc.6, use -f when unmounting remote filesystems to avoid getting
-  stuck in the case of a dead server.
-  In rc.M, start /etc/rc.d/rc.autofs if it is executable.
-  Thanks to Csaba Biegl.
-ap/linuxdoc-tools-0.9.66-x86_64-8.txz:  Rebuilt.
- Upgraded to gnome-doc-utils-0.20.4.
-kde/polkit-qt-1-r1145513-x86_64-2.txz:  Rebuilt.
-  Patched to fix a crash at logout.
-l/gdk-pixbuf2-2.23.1-x86_64-1.txz:  Upgraded.
-l/system-config-printer-1.2.7-x86_64-1.txz:  Upgraded.
-l/pycups-1.9.55-x86_64-1.txz:  Upgraded.
-n/nfs-utils-1.2.3-x86_64-3.txz:  Rebuilt.
-  Added /etc/nfsmount.conf set to protocol version 3 by default.
-  Thanks to Niels Horn.
-x/libhangul-0.0.12-x86_64-1.txz:  Upgraded.
-xap/gnuchess-5.08-x86_64-2.txz:  Rebuilt.
-  Upgraded to xboard-4.5.1.
-  Fixed xboard.desktop.  Thanks to Eric Hameleers.
-xap/mozilla-firefox-4.0-x86_64-1.txz:  Upgraded.
-  Thanks to the Mozilla Foundation for all the hard work on Firefox 4.0!
-extra/bash-completion/bash-completion-1.3-noarch-3.txz:  Rebuilt.
-  Complete on 'sh' the same as stock bash.  Thanks to Robby Workman.
-extra/google-chrome/*:  Added.
-  Added a google-chrome.SlackBuild to convert the Google Chrome .deb
-  packages for Slackware.  Thanks to Erik Hanson.
-  Also added GConf and ORBit2 packages for Google Chrome in this directory.
-+--------------------------+
-Sun Mar 20 20:27:34 UTC 2011
-xap/mozilla-firefox-4.0rc2-x86_64-1.txz:  Upgraded.
-xap/xgames-0.3-x86_64-4.txz:  Rebuilt.
-+--------------------------+
-Sun Mar 20 04:19:27 UTC 2011
-a/mkinitrd-1.4.6-x86_64-6.txz:  Rebuilt.
-  Use --resolve-names=never when starting udevd in the initrd.
-  Thanks to crocket.
-a/openssl-solibs-0.9.8r-x86_64-2.txz:  Rebuilt.
-a/pkgtools-13.37-noarch-3.tgz:  Rebuilt.
-  Accept non-standard slack-desc for installpkg --terse.
-ap/dmidecode-2.11-x86_64-1.txz:  Upgraded.
-ap/zsh-4.3.11-x86_64-1.txz:  Upgraded.
-d/mercurial-1.8.1-x86_64-1.txz:  Upgraded.
-l/cairo-1.10.2-x86_64-2.txz:  Rebuilt.
-  Added configure option --enable-tee for Firefox.
-n/net-snmp-5.6.1-x86_64-1.txz:  Upgraded.
-n/openssl-0.9.8r-x86_64-2.txz:  Rebuilt.
-  Make sure that the fixed certwatch script gets installed.
-n/php-5.3.6-x86_64-2.txz:  Rebuilt.
-  Added configure option --with-mysql-sock=/var/run/mysql/mysql.sock
-  which is needed since changing to the mysqlnd connector (the compile-
-  time default is no longer read from /usr/bin/mysql_config).
-  Thanks to Gregory J. L. Tourte.
-n/wpa_supplicant-0.7.3-x86_64-3.txz:  Rebuilt.
-  Included a patch from git that will be needed by NetworkManager-0.9.
+  Use fixed 13-dm-disk.rules.
+  Added top-level /run directory.
++--------------------------+
+Mon Jul 16 19:00:08 UTC 2012
+a/sysvinit-scripts-2.0-noarch-2.txz:  Rebuilt.
+  Changed /etc/inittab to clear consoles after logout (actually before
+  starting /bin/login from agetty *except* for the first console with the boot
+  messages.  This seems a good compromise, and also prevents getting locked
+  out of the machine if someone drops back to an earlier version of util-linux
+  for some reason.  I found that one out the hard way.  ;-)
+a/ntfs-3g-2012.1.15-x86_64-2.txz:  Rebuilt.
+  Made /bin/ntfs-3g setuid root, because otherwise it refuses to allow
+  non-root users to mount volumes now, even if /etc/fstab allows it.
+a/util-linux-2.21.2-x86_64-2.txz:  Rebuilt.
+  Use --enable-libmount-mount, not --enable-new-mount.  The latter option
+  breaks umount for users, even when /etc/fstab should allow it.
+  Thanks to Chris Vine for the bug report.
++--------------------------+
+Mon Jul 16 02:46:21 UTC 2012
+a/lvm2-2.02.96-x86_64-3.txz:  Rebuilt.
+  Removed static libraries.
+  Fixed broken /usr/lib64/libdevmapper-event-lvm2raid.so symlink.
+  Thanks to Patrick Verner.
++--------------------------+
+Sun Jul 15 17:10:38 UTC 2012
+a/lvm2-2.02.96-x86_64-2.txz:  Rebuilt.
+  Recompiled to generate fixed /lib/udev/rules.d/13-dm-disk.rules.
+a/mkinitrd-1.4.7-x86_64-2.txz:  Rebuilt.
+  According to rworkman, udev is indeed required now in early boot for any
+  system using an initrd, so we'll set UDEV=1 in mkinitrd (leaving -u as a
+  no-op).  This should clear up the issues with the /init script that
+  expected udevadm to be present.
+  Use ldconfig -l to ensure all shared libraries have the correct symlinks.
+  Thanks to Olek on LQ.
+ap/sox-14.4.0-x86_64-1.txz:  Upgraded.
+l/libspectre-0.2.6-x86_64-1.txz:  Upgraded.
++--------------------------+
+Sun Jul 15 01:40:08 UTC 2012
+Juggle a few things around so that slackpkg won't fall over while upgrading
+from 13.37 or an earlier -current:
+a/aaa_elflibs-14.0-x86_64-2.txz:  Rebuilt.
+  Don't include libcrypto.so.0 and libssl.so.0 in here.
+  The openssl-solibs package is a better place for them.
+a/openssl-solibs-1.0.1c-x86_64-2.txz:  Rebuilt.
+  Moved the old 0.9.8x libraries here.
+n/openssl-1.0.1c-x86_64-2.txz:  Rebuilt.
+n/wget-1.13.4-x86_64-2.txz:  Rebuilt.
+  Prefer linking with OpenSSL, since the license allows it.
+  This is less of a moving target than GnuTLS.
++--------------------------+
+Fri Jul 13 23:14:15 UTC 2012
+It's Friday the 13th, and Mercury is going into retrograde...  seems like the
+perfect time to break things!  A few notes are in order here...   first, we've
+switched to using openssl-1.0.1c, which changes the major number for the
+crypto and ssl libraries from .0 to .1, meaning everything linked with the
+previous version of openssl will need to be recompiled.  The
+lib{crypto,ssl}.so.0 libraries were backed up into aaa_elflibs, but this only
+means that binaries linked with those libraries will start, not that SSL will
+continue to work for them.  The hashing format in /etc/ssl/certs/ has changed,
+so any programs linking to the old libraries will not be able to use them.
+Next, Java has gone away due to licensing restrictions...  Finally, these
+changes have broken Xfce as it exists in -current at the moment, but I'll try
+to do something about that soon.  Thanks to Robby Workman and Eric Hameleers
+for lots of help on these updates!
+a/aaa_elflibs-14.0-x86_64-1.txz:  Upgraded.
+a/cryptsetup-1.4.3-x86_64-1.txz:  Upgraded.
+a/cups-1.5.3-x86_64-2.txz:  Rebuilt.
+a/cxxlibs-6.0.17-x86_64-1.txz:  Upgraded.
+a/dbus-1.4.20-x86_64-1.txz:  Upgraded.
+a/grep-2.13-x86_64-1.txz:  Upgraded.
+a/gzip-1.5-x86_64-1.txz:  Upgraded.
+a/kernel-generic-3.2.23-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.23-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.23-x86_64-1.txz:  Upgraded.
+a/lvm2-2.02.96-x86_64-1.txz:  Upgraded.
+a/mdadm-3.2.5-x86_64-1.txz:  Upgraded.
+a/mkinitrd-1.4.7-x86_64-1.txz:  Upgraded.
   Thanks to Robby Workman.
-x/scim-1.4.9-x86_64-5.txz:  Rebuilt.
-  Address stability issues with Firefox and other applications.
-  Thanks to Bruce Hill for the patches.
-x/scim-bridge-0.4.16-x86_64-5.txz:  Rebuilt.
-  Address stability issues with Firefox and other applications.
-  Thanks to Bruce Hill for the patches.
-x/xf86-input-keyboard-1.6.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-mouse-1.7.0-x86_64-1.txz:  Upgraded.
-xap/gucharmap-2.33.2-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-4.0rc1-x86_64-2.txz:  Rebuilt.
-  "checking for cairo-tee >= 1.10... yes"
-xap/xgames-0.3-x86_64-3.txz:  Rebuilt.
-  Upgraded to xsnow-1.42.  :)
-isolinux/initrd.img:  Rebuilt.
-usb-and-pxe-installers/usbboot.img:  Rebuilt.
-+--------------------------+
-Sat Mar 19 04:37:14 UTC 2011
-a/pkgtools-13.37-noarch-2.tgz:  Rebuilt.
-  Add --terse one-line output mode to installpkg.
-f/linux-howtos-20110210-noarch-1.txz:  Upgraded.
-n/nfs-utils-1.2.3-x86_64-2.txz:  Rebuilt.
-  In rc.nfsd, test for nfsd support in the kernel before trying to modprobe.
+  Added mdmon to initrd if RAID=1.  Thanks to Marek Wodzinski.
+  Add firmware needed by modules.  Thanks to ecd102 on LQ.
+a/openssl-solibs-1.0.1c-x86_64-1.txz:  Upgraded.
+a/pciutils-3.1.9-x86_64-1.txz:  Upgraded.
+  Moved the location of pci.ids to /usr/share/hwdata.
+a/sysvinit-2.88dsf-x86_64-1.txz:  Upgraded.
+a/sysvinit-scripts-2.0-noarch-1.txz:  Upgraded.
+a/udev-175-x86_64-1.txz:  Upgraded.
+a/upower-0.9.17-x86_64-1.txz:  Upgraded.
+a/usbutils-006-x86_64-1.txz:  Upgraded.
+  Moved the location of usb.ids to /usr/share/hwdata.
+a/util-linux-2.21.2-x86_64-1.txz:  Upgraded.
+ap/cdrdao-1.2.3-x86_64-2.txz:  Rebuilt.
+ap/cdrtools-3.01a07-x86_64-1.txz:  Upgraded.
+ap/ghostscript-9.05-x86_64-3.txz:  Rebuilt.
+ap/gphoto2-2.4.14-x86_64-1.txz:  Upgraded.
+ap/gutenprint-5.2.8-x86_64-2.txz:  Rebuilt.
+ap/hplip-3.12.6-x86_64-2.txz:  Rebuilt.
+ap/man-pages-3.41-noarch-1.txz:  Upgraded.
+ap/mc-4.8.1.3-x86_64-1.txz:  Upgraded.
+ap/moc-2.5.0_alpha4-x86_64-2.txz:  Rebuilt.
+ap/mysql-5.5.25a-x86_64-1.txz:  Upgraded.
+d/doxygen-1.8.1.1-x86_64-1.txz:  Upgraded.
+d/git-1.7.11.1-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.2.23-x86-1.txz:  Upgraded.
+d/llvm-3.0-x86_64-2.txz:  Rebuilt.
+d/perl-5.16.0-x86_64-2.txz:  Rebuilt.
+d/python-2.7.3-x86_64-2.txz:  Rebuilt.
+d/ruby-1.9.3_p194-x86_64-2.txz:  Rebuilt.
+d/subversion-1.7.5-x86_64-3.txz:  Rebuilt.
+e/emacs-24.1-x86_64-2.txz:  Rebuilt.
+k/kernel-source-3.2.23-noarch-1.txz:  Upgraded.
+  Changes to configuration:
+  CONFIG_SCSI_ISCSI_ATTRS=m
+  # CONFIG_BCMA is not set
+  CONFIG_BRCMSMAC=m
+  CONFIG_SCSI_ISCSI_ATTRS was made modular since the iSCSI userspace will not
+  work with it built in.  This change disallows building the QLogic 40xx
+  (ISP4XXX) and 8022 (ISP82XX) into the huge kernel, but for the same reason
+  those would not have worked for installation anyway.
+  CONFIG_BCMA was turned off because including it prevents building the
+  Broadcom BRCMSMAC driver, which is the only working choice for several
+  adapters other than the proprietary wl driver.  Unfortunately, removing
+  BCMA removes support for bcm4331 from the b43 driver.  However, adding the
+  BRCMSMAC causes several new adaptors to gain support, including some that
+  are becoming quite common in recent laptops, so overall this change should
+  be a net gain.
+kde/amarok-2.5.0-x86_64-5.txz:  Rebuilt.
+kde/calligra-2.4.3-x86_64-1.txz:  Upgraded.
+kde/kdelibs-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kdemultimedia-4.8.4-x86_64-2.txz:  Rebuilt.
+kde/kdepim-4.8.4-x86_64-2.txz:  Rebuilt.
+kdei/calligra-l10n-ca-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-ca\@valencia-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-cs-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-da-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-de-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-el-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-en_GB-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-es-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-et-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-fi-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-fr-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-hu-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-it-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-kk-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nb-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nds-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nl-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pl-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pt-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pt_BR-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-ru-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-sk-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-sv-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-uk-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-zh_CN-2.4.3-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-zh_TW-2.4.3-noarch-1.txz:  Upgraded.
+l/ConsoleKit-0.4.5-x86_64-1.txz:  Upgraded.
+l/M2Crypto-0.21.1-x86_64-2.txz:  Rebuilt.
+l/apr-util-1.4.1-x86_64-3.txz:  Rebuilt.
+l/atk-2.4.0-x86_64-1.txz:  Upgraded.
+l/babl-0.1.10-x86_64-1.txz:  Upgraded.
+l/dbus-glib-0.98-x86_64-1.txz:  Upgraded.
+l/dbus-python-1.1.0-x86_64-1.txz:  Upgraded.
+l/desktop-file-utils-0.20-x86_64-1.txz:  Upgraded.
+l/gdk-pixbuf2-2.26.1-x86_64-1.txz:  Upgraded.
+l/gegl-0.2.0-x86_64-1.txz:  Upgraded.
+l/glib2-2.32.3-x86_64-1.txz:  Upgraded.
+l/gnome-icon-theme-3.4.0-x86_64-1.txz:  Upgraded.
+l/gobject-introspection-1.32.1-x86_64-1.txz:  Added.
+l/gst-plugins-base-0.10.36-x86_64-1.txz:  Upgraded.
+l/gst-plugins-good-0.10.31-x86_64-1.txz:  Upgraded.
+l/gstreamer-0.10.36-x86_64-1.txz:  Upgraded.
+l/gtk+2-2.24.10-x86_64-1.txz:  Upgraded.
+l/gtk+3-3.4.3-x86_64-1.txz:  Added.
+l/jre-6u27-x86_64-1.txz:  Removed.
+l/libarchive-2.8.5-x86_64-1.txz:  Upgraded.
+l/libcddb-1.3.2-x86_64-2.txz:  Rebuilt.
+l/libcdio-0.83-x86_64-1.txz:  Upgraded.
+l/libcroco-0.6.5-x86_64-1.txz:  Added.
+l/libgphoto2-2.4.14-x86_64-1.txz:  Upgraded.
+  Fixed to generate correct udev rules.
+  Thanks to Brad Hermanson.
+l/libmsn-4.2.1-x86_64-2.txz:  Rebuilt.
+l/libmtp-1.1.3-x86_64-1.txz:  Upgraded.
+l/libnl3-3.2.11-x86_64-1.txz:  Added.
+l/libnotify-0.7.5-x86_64-1.txz:  Upgraded.
+l/libogg-1.3.0-x86_64-1.txz:  Upgraded.
+l/libpcap-1.3.0-x86_64-1.txz:  Upgraded.
+l/librsvg-2.36.1-x86_64-1.txz:  Upgraded.
+l/libvncserver-0.9.9-x86_64-2.txz:  Rebuilt.
+l/libvorbis-1.3.3-x86_64-1.txz:  Upgraded.
+l/libwnck-2.30.7-x86_64-2.txz:  Rebuilt.
+l/libxklavier-5.2.1-x86_64-1.txz:  Upgraded.
+l/libyaml-0.1.4-x86_64-1.txz:  Added.
   Thanks to Vincent Batts.
-x/dejavu-fonts-ttf-2.33-noarch-1.txz:  Upgraded.
-x/liberation-fonts-ttf-1.06.0.20100721-noarch-2.txz:  Rebuilt.
-  Removed obsolete /etc/fonts/conf.avail/60-liberation.conf.
-  Thanks to Dugan Chen.
-xap/sane-1.0.22-x86_64-2.txz:  Rebuilt.
-  Configured backends with --enable-libusb_1_0.
-  Thanks to Heinz Wiesinger.
-isolinux/initrd.img:  Rebuilt.
-  Added "terse" installer prompting mode.  This does the same thing as the
-  "full" install mode, but outputs a single description line (with size info)
-  as each package is installed.  I liked this from Slackware versions 1.00
-  through 1.1.1 and it's nice to see it make a comeback!  I'm betting this
-  will work better for Speakup installs, too.  Thanks to Skaperen on LQ.
-usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Added "terse" installer prompting mode.
-+--------------------------+
-Fri Mar 18 05:49:19 UTC 2011
-a/kernel-firmware-2.6.37.4-noarch-2.txz:  Rebuilt.
-a/kernel-generic-2.6.37.4-x86_64-2.txz:  Rebuilt.
-a/kernel-huge-2.6.37.4-x86_64-2.txz:  Rebuilt.
-a/kernel-modules-2.6.37.4-x86_64-2.txz:  Rebuilt.
-a/usbutils-002-x86_64-1.txz:  Upgraded.
-d/cmake-2.8.4-x86_64-1.txz:  Upgraded.
-d/kernel-headers-2.6.37.4-x86-2.txz:  Rebuilt.
-k/kernel-source-2.6.37.4-noarch-2.txz:  Rebuilt.
-  Reconfigured to add Firewire and FireDTV modules.
-  Thanks to Gregory J. L. Tourte for pointing out that the old IEEE1394
-  firewire stack is gone in 2.6.37.
-l/libraw1394-2.0.7-x86_64-1.txz:  Upgraded.
-n/php-5.3.6-x86_64-1.txz:  Upgraded.
-  This release of PHP fixes several security issues:
-  Enforce security in the fastcgi protocol parsing with fpm SAPI.
-  Fixed bug #54247 (format-string vulnerability on Phar). (CVE-2011-1153)
-  Fixed bug #54193 (Integer overflow in shmop_read()). (CVE-2011-1092)
-  Fixed bug #54055 (buffer overrun with high values for precision ini setting).
-  Fixed bug #54002 (crash on crafted tag in exif). (CVE-2011-0708)
-  Fixed bug #53885 (ZipArchive segfault with FL_UNCHANGED on empty archive).
-  (CVE-2011-0421)
+l/loudmouth-1.4.3-x86_64-2.txz:  Rebuilt.
+l/mozilla-nss-3.13.5-x86_64-1.txz:  Added.
+l/neon-0.29.6-x86_64-2.txz:  Rebuilt.
+l/notify-python-0.1.1-x86_64-3.txz:  Rebuilt.
+l/pango-1.30.1-x86_64-1.txz:  Upgraded.
+l/polkit-0.105-x86_64-1.txz:  Upgraded.
+l/polkit-gnome-0.102-x86_64-1.txz:  Upgraded.
+l/poppler-0.18.4-x86_64-1.txz:  Upgraded.
+l/poppler-data-0.4.5-noarch-1.txz:  Upgraded.
+l/pycurl-7.19.0-x86_64-2.txz:  Rebuilt.
+l/pygobject-2.28.6-x86_64-1.txz:  Upgraded.
+l/pygtk-2.24.0-x86_64-1.txz:  Upgraded.
+l/qca-ossl-2.0.0_beta3-x86_64-2.txz:  Rebuilt.
+l/qt-4.8.2-x86_64-1.txz:  Upgraded.
+l/raptor-1.4.21-x86_64-1.txz:  Removed.
+  This package is no longer used -- everything links to raptor2 instead.
+  Plus, it overlaps with raptor2's /usr/bin/rapper binary, so make sure
+  after removing it that you've got the right copy of that, reinstalling
+  raptor2 if needed.  Thanks to Gérard Monpontet.
+l/redland-1.0.15-x86_64-4.txz:  Rebuilt.
+l/seamonkey-solibs-2.10.1-x86_64-2.txz:  Rebuilt.
+l/shared-mime-info-1.0-x86_64-1.txz:  Upgraded.
+l/v4l-utils-0.8.8-x86_64-2.txz:  Upgraded.
+l/virtuoso-ose-6.1.3-x86_64-3.txz:  Rebuilt.
+n/NetworkManager-0.9.4.0-x86_64-1.txz:  Upgraded.
+  Link with Mozilla NSS rather than GnuTLS.
+n/alpine-2.02-x86_64-1.txz:  Upgraded.
+  Now using the re-alpine sources.
+n/bind-9.9.1_P1-x86_64-2.txz:  Rebuilt.
+n/bluez-4.99-x86_64-1.txz:  Upgraded.
+n/bluez-hcidump-2.4-x86_64-1.txz:  Upgraded.
+n/ca-certificates-20120623-noarch-1.txz:  Upgraded.
+n/curl-7.26.0-x86_64-2.txz:  Rebuilt.
+n/cyrus-sasl-2.1.23-x86_64-4.txz:  Rebuilt.
+n/dhcp-4.2.4-x86_64-1.txz:  Upgraded.
+n/dhcpcd-5.5.6-x86_64-1.txz:  Upgraded.
+n/epic5-1.1.3-x86_64-1.txz:  Upgraded.
+n/fetchmail-6.3.21-x86_64-2.txz:  Rebuilt.
+n/gnupg-1.4.12-x86_64-1.txz:  Upgraded.
+n/gnupg2-2.0.19-x86_64-1.txz:  Upgraded.
+n/gnutls-3.0.21-x86_64-1.txz:  Upgraded.
+n/gpgme-1.3.2-x86_64-1.txz:  Upgraded.
+n/htdig-3.2.0b6-x86_64-4.txz:  Rebuilt.
+n/httpd-2.4.2-x86_64-3.txz:  Rebuilt.
+n/imapd-2.02-x86_64-1.txz:  Upgraded.
+  Now using the re-alpine sources.
+n/iproute2-3.4.0-x86_64-1.txz:  Upgraded.
+n/iptables-1.4.14-x86_64-1.txz:  Upgraded.
+n/irssi-0.8.15-x86_64-6.txz:  Rebuilt.
+n/iw-3.5-x86_64-1.txz:  Upgraded.
+n/lftp-4.3.8-x86_64-1.txz:  Upgraded.
+n/libassuan-2.0.3-x86_64-1.txz:  Upgraded.
+n/libgcrypt-1.5.0-x86_64-1.txz:  Upgraded.
+n/libgpg-error-1.10-x86_64-1.txz:  Upgraded.
+n/links-2.7-x86_64-1.txz:  Upgraded.
+n/lynx-2.8.7-x86_64-3.txz:  Rebuilt.
+n/mailx-12.5-x86_64-1.txz:  Upgraded.
+n/mutt-1.5.21-x86_64-2.txz:  Rebuilt.
+n/net-snmp-5.6.1-x86_64-4.txz:  Rebuilt.
+n/netatalk-2.0.5-x86_64-2.txz:  Rebuilt.
+n/nettle-2.5-x86_64-1.txz:  Added.
+n/nmap-6.01-x86_64-2.txz:  Rebuilt.
+n/ntp-4.2.6p5-x86_64-2.txz:  Rebuilt.
+n/openldap-client-2.4.31-x86_64-2.txz:  Rebuilt.
+n/openssh-6.0p1-x86_64-2.txz:  Rebuilt.
+n/openssl-1.0.1c-x86_64-1.txz:  Upgraded.
+n/openvpn-2.2.2-x86_64-1.txz:  Upgraded.
+n/p11-kit-0.12-x86_64-1.txz:  Added.
+n/php-5.4.4-x86_64-1.txz:  Upgraded.
+  This release fixes a weakness in the DES implementation of crypt
+  and a heap overflow issue in the phar extension.
+  (* Security fix *)
+n/pidentd-3.0.19-x86_64-2.txz:  Rebuilt.
+n/popa3d-1.0.2-x86_64-3.txz:  Rebuilt.
+n/proftpd-1.3.4a-x86_64-2.txz:  Rebuilt.
+n/samba-3.6.6-x86_64-1.txz:  Upgraded.
+n/sendmail-8.14.5-x86_64-3.txz:  Rebuilt.
+n/sendmail-cf-8.14.5-noarch-3.txz:  Rebuilt.
+n/slrn-0.9.9p1-x86_64-4.txz:  Rebuilt.
+n/snownews-1.5.12-x86_64-2.txz:  Rebuilt.
+n/stunnel-4.53-x86_64-1.txz:  Rebuilt.
+n/tcpdump-4.3.0-x86_64-1.txz:  Upgraded.
+n/vsftpd-3.0.0-x86_64-2.txz:  Rebuilt.
+n/wget-1.13.4-x86_64-1.txz:  Upgraded.
+n/wpa_supplicant-1.0-x86_64-1.txz:  Upgraded.
+x/fontconfig-2.9.0-x86_64-1.txz:  Upgraded.
+x/mesa-8.0.4-x86_64-1.txz:  Upgraded.
+x/pixman-0.26.2-x86_64-1.txz:  Upgraded.
+x/xdg-user-dirs-0.14-x86_64-1.txz:  Upgraded.
+x/xorg-server-1.12.3-x86_64-1.txz:  Upgraded.
+x/xorg-server-xephyr-1.12.3-x86_64-1.txz:  Upgraded.
+x/xorg-server-xnest-1.12.3-x86_64-1.txz:  Upgraded.
+x/xorg-server-xvfb-1.12.3-x86_64-1.txz:  Upgraded.
+xap/MPlayer-1.1_20120701-x86_64-1.txz:  Upgraded.
+  Latest 1.1 branch checkout.  Thanks to alienBOB.
+xap/audacious-3.2.4-x86_64-1.txz:  Upgraded.
+xap/audacious-plugins-3.2.4-x86_64-1.txz:  Upgraded.
+xap/fluxbox-1.3.2-x86_64-1.txz:  Upgraded.
+xap/fvwm-2.6.5-x86_64-1.txz:  Upgraded.
+xap/gftp-2.0.19-x86_64-3.txz:  Rebuilt.
+xap/gimp-2.8.0-x86_64-1.txz:  Upgraded.
+xap/gkrellm-2.3.5-x86_64-2.txz:  Rebuilt.
+xap/gucharmap-3.4.1-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-13.0.1-x86_64-2.txz:  Rebuilt.
+  Don't build in the main source directory.  Thanks to ponce.
+xap/mozilla-thunderbird-13.0.1-x86_64-2.txz:  Rebuilt.
+  Don't build in the main source directory.  Thanks to ponce.
+xap/pan-0.139-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.10.6-x86_64-1.txz:  Upgraded.
+  Fixes a security issue for users of MXit:  Incorrect handing of inline
+  images in incoming instant messages can cause a buffer overflow and in
+  some cases can be exploited to execute arbitrary code.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0421
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0708
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1092
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1153
-  (* Security fix *)
-x/libX11-1.4.2-x86_64-1.txz:  Upgraded.
-x/xf86-input-wacom-0.10.11-x86_64-1.txz:  Upgraded.
-x/xf86-video-ati-6.14.1-x86_64-1.txz:  Upgraded.
-x/xorg-server-1.9.5-x86_64-1.txz:  Upgraded.
-x/xorg-server-xephyr-1.9.5-x86_64-1.txz:  Upgraded.
-x/xorg-server-xnest-1.9.5-x86_64-1.txz:  Upgraded.
-x/xorg-server-xvfb-1.9.5-x86_64-1.txz:  Upgraded.
-xap/gnuplot-4.4.3-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-4.0rc1-x86_64-1.txz:  Upgraded.
-  It is time to push this into the main tree.  It's unlikely that we'll see
-  significant changes prior to Firefox 4.0 final.  Probably the first security
-  fixes for the Firefox 4.0 branch will come with Firefox 4.0.1, which is the
-  branch that we'll want to be tracking in Slackware 13.37's /patches.  If for
-  some reason you want to stick with Firefox 3.6.x, it will be tracked in
-  Slackware 13.1's /patches for as long as they support it upstream.
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-3374
+  (* Security fix *)
+  Link with Mozilla NSS rather than GnuTLS.
+xap/rdesktop-1.7.1-x86_64-3.txz:  Rebuilt.
+xap/sane-1.0.22-x86_64-4.txz:  Rebuilt.
+xap/seamonkey-2.10.1-x86_64-2.tx:  Rebuilt.
+  Don't build in the main source directory.  Thanks to ponce.
+  Removed nss.pc and nspr.pc symlinks.
+xap/windowmaker-0.95.3-x86_64-1.txz:  Upgraded.
+xap/x3270-3.3.12ga7-x86_64-2.txz:  Rebuilt.
+xap/xchat-2.8.8-x86_64-6.txz:  Rebuilt.
+xap/xsane-0.998-x86_64-2.txz:  Rebuilt.
+extra/jdk-6/jdk-6u27-x86_64-1.txz:  Removed.
 isolinux/initrd.img:  Rebuilt.
-kernels/*:  Rebuilt.
-testing/source/linux-2.6.38-configs/:  Added some example .config files.
+  Change location of usb.ids and pci.ids to /usr/share/hwdata.
+  Patched busybox to fix wget -P option.  Thanks to Kirill Smirnoff.
+  Allow nic=auto for headless installs.  Thanks to alienBOB.
+  Fixed /sbin/probe for systems that mix HP RAID with regular hard drives.
+  Thanks to mario.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Wed Mar 16 06:20:03 UTC 2011
-Slackware 13.37 release candidate 2 is ready for testing.
-Are we almost there?
-a/aaa_elflibs-13.37-x86_64-2.txz:  Rebuilt.
-a/glibc-solibs-2.13-x86_64-3.txz:  Rebuilt.
-a/glibc-zoneinfo-2.13-noarch-3.txz:  Rebuilt.
-  Upgraded to tzcode2011d and tzdata2011d.
-a/kernel-firmware-2.6.37.4-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.37.4-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.37.4-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.37.4-x86_64-1.txz:  Upgraded.
-ap/lxc-0.7.4-x86_64-2.txz:  Rebuilt.
-  Rebuilt with --localstatedir=/var and added /var/lib/lxc.
-  Thanks to Audrius Kazukauskas.
-ap/mc-4.7.5.1-x86_64-2.txz:  Rebuilt.
-  Fixed smb (cifs?) filesystem ./configure options.
-  Thanks to Ferenc Deak.
-d/kernel-headers-2.6.37.4-x86-1.txz:  Upgraded.
-k/kernel-source-2.6.37.4-noarch-1.txz:  Upgraded.
-l/gamin-0.1.10-x86_64-3.txz:  Rebuilt.
-  Install a /etc/gamin/gaminrc with reasonable defaults.
-  Thanks to Niels Horn.
-l/glib2-2.28.3-x86_64-1.txz:  Upgraded.
-l/glibc-2.13-x86_64-3.txz:  Rebuilt.
-l/glibc-i18n-2.13-x86_64-3.txz:  Rebuilt.
-l/glibc-profile-2.13-x86_64-3.txz:  Rebuilt.
-l/gtk+2-2.24.3-x86_64-1.txz:  Upgraded.
-n/dnsmasq-2.57-x86_64-1.txz:  Upgraded.
-n/iproute2-2.6.37-x86_64-1.txz:  Upgraded.
-x/mesa-7.9.2-x86_64-1.txz:  Upgraded.
-xap/xlockmore-5.32-x86_64-1.txz:  Upgraded.
-xap/xscreensaver-5.12-x86_64-1.txz:  Upgraded.
+Sat Jun 30 04:48:12 UTC 2012
+a/shadow-4.1.4.3-x86_64-4.txz:  Rebuilt.
+  Added "lp" to CONSOLE_GROUPS (needed for scanning).
+  To enable scanning:  mv /etc/login.defs.new /etc/login.defs
+xap/sane-1.0.22-x86_64-3.txz:  Rebuilt.
+  Patched to fix compiling against v4l-utils.
+  Changed udev rules to use group lp instead of scanner.  It turns out that
+  this is likely what's been interfering with printer detection since we
+  switched CUPS to use libusb instead of the usblp kernel module.  SANE
+  would come along and switch the group on multifunction printer/scanners
+  to "scanner", and then CUPS would no longer be able to use them.  The
+  kernel module wasn't affected by this since it didn't use the raw USB
+  device node and didn't care who owned it.  Anyway, making this switch
+  gets things pretty close to how they were before.  The good news is that
+  printers should be detected and configurable without having to look at
+  lsusb output or writing custom udev rules, however, users will need to
+  be in group lp in order to use the scanner.  We'll do this automatically
+  for console logins.
++--------------------------+
+Fri Jun 29 17:17:16 UTC 2012
+ap/linuxdoc-tools-0.9.67-x86_64-2.txz:  Rebuilt.
+  Made a compatibility symlink between
+  /usr/share/xml/docbook/stylesheet/docbook-xsl ->
+  /usr/share/xml/docbook/xsl-stylesheets-<ver>
+  Thanks to Patrick Verner for the suggestion.
+  Thanks to Stuart Winter for the package update.
+n/cyrus-sasl-2.1.23-x86_64-3.txz:  Rebuilt.
+  Restored .la files -- these are too tangled into other .la files to try
+  to eradicate them now.  Thanks to Jérôme Pinot.
++--------------------------+
+Fri Jun 29 04:49:26 UTC 2012
+a/kmod-9-x86_64-2.txz:  Rebuilt.
+  Added /bin/lsmod symlink.  Thanks to Patrick Verner.
++--------------------------+
+Thu Jun 28 21:40:00 UTC 2012
+More updates.  Thanks to Robby Workman for help on many of these.
+a/acl-2.2.51-x86_64-1.txz:  Upgraded.
+a/attr-2.4.46-x86_64-1.txz:  Upgraded.
+a/coreutils-8.17-x86_64-1.txz:  Upgraded.
+a/dcron-4.5-x86_64-1.txz:  Upgraded.
+a/file-5.11-x86_64-1.txz:  Upgraded.
+a/kbd-1.15.3-x86_64-1.txz:  Upgraded.
+a/kmod-9-x86_64-1.txz:  Added.
+  This is the new replacement for module-init-tools.
+a/less-444-x86_64-1.txz:  Upgraded.
+a/logrotate-3.8.1-x86_64-1.txz:  Upgraded.
+a/module-init-tools-3.16-x86_64-1.txz:  Removed.
+a/ntfs-3g-2012.1.15-x86_64-1.txz:  Upgraded.
+  This merges in the tools from ntfsprogs.
+  Created a mount.ntfs symlink to mount.ntfs-3g, so that the ntfs-3g
+  filesystem will always be used for mounting NTFS volumes.
+a/sdparm-1.07-x86_64-1.txz:  Upgraded.
+a/xfsprogs-3.1.8-x86_64-1.txz:  Upgraded.
+ap/diffutils-3.2-x86_64-1.txz:  Upgraded.
+ap/ghostscript-9.05-x86_64-2.txz:  Rebuilt.
+  Restored missing CUPS support.  Thanks to alienBOB.
+ap/lsscsi-0.26-x86_64-1.txz:  Upgraded.
+ap/ntfsprogs-2.0.0-x86_64-2.txz:  Removed.
+ap/sudo-1.8.5p2-x86_64-1.txz:  Upgraded.
+d/bison-2.5.1-x86_64-1.txz:  Upgraded.
+d/intltool-0.50.2-x86_64-1.txz:  Upgraded.
+l/libusb-1.0.9-x86_64-1.txz:  Upgraded.
+l/libusb-compat-0.1.4-x86_64-1.txz:  Added.
+  Split from libusb and upgraded.
+n/cyrus-sasl-2.1.23-x86_64-2.txz:  Reverted.
+  There seem to be major issues with cyrus-sasl-2.1.25...  perhaps that's
+  why everyone else seems to be sticking with cyrus-sasl-2.1.23.
+  Patched to fix a bad #elif.  Thanks to Vincent Batts.
+  Add --mandir.  Thanks to Stuart Winter.
+xap/imagemagick-6.7.7_10-x86_64-1.txz:  Upgraded.
+xap/rdesktop-1.7.1-x86_64-2.txz:  Rebuilt.
+  Added --enable-ipv6.  Thanks to Zhu Qun-Ying.
++--------------------------+
+Wed Jun 27 04:38:25 UTC 2012
+a/shadow-4.1.4.3-x86_64-3.txz:  Rebuilt.
+  Default to SHA256 encryption for /etc/shadow on new installations.
+  HINT:  You might want to make this change in an existing /etc/login.defs:
+    ENCRYPT_METHOD SHA256
+  or even this, if the increased CPU time is not an issue:
+    ENCRYPT_METHOD SHA512
+n/lynx-2.8.7-x86_64-2.txz:  Rebuilt.
+  Added --enable-ipv6.  Thanks to DrBerlin.
+xap/blueman-r708-x86_64-2.txz:  Reverted.
+  Switched back to r708, since the newer repo pull is requiring PulseAudio.
+  We'll consider what to do about this long term sometime down the road.
++--------------------------+
+Tue Jun 26 22:35:09 UTC 2012
+a/aaa_base-14.0-x86_64-2.txz:  Rebuilt.
+a/grep-2.12-x86_64-1.txz:  Upgraded.
+a/xz-5.0.4-x86_64-1.tgz:  Upgraded.
+l/pycurl-7.19.0-x86_64-1.txz:  Added.
+n/curl-7.26.0-x86_64-1.txz:  Upgraded.
++--------------------------+
+Tue Jun 26 18:35:11 UTC 2012
+d/cmake-2.8.8-x86_64-2.txz:  Rebuilt.
+  Patched a bug where cmake could not find pkg-config.
+  Thanks to Matteo Bernardini.
+l/PyQt-4.9.1-x86_64-3.txz:  Rebuilt.
+  Missing qt.so module was fixed with a recompile... build order, perhaps.
+n/nmap-6.01-x86_64-1.txz:  Upgraded.
+  Configured using --without-nmap-update to avoid linking with APR
+  and subversion libraries.  Thanks to Kirils Solovjovs.
+xap/imagemagick-6.7.7_9-x86_64-1.txz:  Upgraded.
+  Removed obsolete/broken .la files.
+xap/rdesktop-1.7.1-x86_64-1.txz:  Upgraded.
+  Thanks to ilredeitopi.
++--------------------------+
+Mon Jun 25 17:22:40 UTC 2012
+a/syslinux-4.05-x86_64-1.txz:  Upgraded.
+  It's not too late for this.  Thanks to piratesmack for the reminder.
+n/cifs-utils-5.5-x86_64-2.txz:  Rebuilt.
+  Patched to fix broken mount.cifs.  Thanks to Robby Workman.
 isolinux/initrd.img:  Rebuilt.
-kernels/*:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Mon Mar 14 05:32:14 UTC 2011
-a/aaa_base-13.37-x86_64-2.txz:  Rebuilt.
-  Fixed a bug that creates /usr/X11R6.bak/ on a fresh installation.
-  Thanks to Cal Peake.
-a/mkinitrd-1.4.6-x86_64-5.txz:  Rebuilt.
-  Updated mkinitrd_command_generator.sh.  Thanks to Eric Hameleers.
-  Search for libraries in /lib and /lib64, not /lib*.
-a/pciutils-3.1.7-x86_64-1.txz:  Upgraded.
-a/usbutils-001-x86_64-2.txz:  Rebuilt.
-  Updated usb.ids.
-kde/guidance-power-manager-4.4.0-x86_64-1.txz:  Removed.
-  This is obsolete, and was probably what was causing the
-  "X11: maximum number to clients reached" issues.
-  Thanks to specialized and Eric Hameleers.
-kde/kdeadmin-4.5.5-x86_64-2.txz:  Rebuilt.
-  Patched knetworkconf for Slackware 13.37.0.
-l/sdl-1.2.14-x86_64-4.txz:  Rebuilt.
-  Removed bogus libmikmod dep from libSDL_mixer.la.  Thanks to Niels Horn.
-  Upgraded to SDL_ttf-2.0.10.
-n/mcabber-0.10.1-x86_64-1.txz:  Upgraded.
-  Thanks to Melvin Xavier for the reminder.
-x/x11-skel-7.4-x86_64-2.txz:  Rebuilt.
-  Fixed a bug that creates /usr/X11R6.bak/ on a fresh installation.
-  Thanks to Cal Peake.
-x/xf86-video-radeonhd-1.3.0-x86_64-2.txz:  Rebuilt.
-  Recompiled to fix unresolved symbol.  Thanks to Luigi Genoni.
-+--------------------------+
-Sat Mar 12 21:07:12 UTC 2011
-ap/lxc-0.7.4-x86_64-1.txz:  Upgraded.
-e/emacs-23.3-x86_64-1.txz:  Upgraded.
-n/iptraf-ng-1.0.2-x86_64-2.txz:  Rebuilt.
-  Created the /var/lib/iptraf/ working directory.
-extra/emacspeak/emacspeak-33.0-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sat Mar 12 01:38:17 UTC 2011
-a/sysvinit-scripts-1.2-noarch-38.txz:  Rebuilt.
-  In rc.M, set permissions of /var/log/dmesg according to
-  /proc/sys/kernel/dmesg_restrict.  Thanks to Robby Workman.
-xap/audacious-2.4.4-x86_64-1.txz:  Upgraded.
-xap/audacious-plugins-2.4.4-x86_64-1.txz:  Upgraded.
-xap/geeqie-1.0-x86_64-3.txz:  Rebuilt.
-  Recompiled with -D_FILE_OFFSET_BITS=64 to fix reading from CIFS shares.
-  Thanks to Bartosz Oudekerk.
-xap/pidgin-2.7.11-x86_64-1.txz:  Upgraded.
-  Fixed denials of service caused by NULL pointer dereferences due to
-  improper handling of malformed YMSG packets.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1091
-  (* Security fix *)
-testing/packages/mesa-7.10.1-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Mar 11 06:34:03 UTC 2011
-a/aaa_base-13.37-x86_64-1.txz:  Upgraded.
-  Bump /etc/slackware-version.
-a/bash-4.1.010-x86_64-1.txz:  Upgraded.
-a/cpio-2.11-x86_64-1.txz:  Upgraded.
-ap/flac-1.2.1-x86_64-3.txz:  Rebuilt.
-  Recompiled to add XMMS plugin.
-ap/mc-4.7.5.1-x86_64-1.txz:  Upgraded.
-ap/mpg123-1.13.2-x86_64-1.txz:  Upgraded.
-d/subversion-1.6.16-x86_64-1.txz:  Upgraded.
-  Fixed a remotely triggerable NULL-pointer dereference in mod_dav_svn.
-  For more information, see:
-    http://subversion.apache.org/security/CVE-2011-0715-advisory.txt
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0715
-  (* Security fix *)
-kde/kdebase-4.5.5-x86_64-2.txz:  Rebuilt.
-  Patched a bug where the right click context menu would be broken after
-  closing a Konsole tab.  Thanks to Vincent Batts.
-l/libao-1.1.0-x86_64-1.txz:  Upgraded.
-l/libogg-1.2.2-x86_64-1.txz:  Upgraded.
-l/liboggz-1.1.1-x86_64-1.txz:  Added.
-  This is a library and tools to edit, inspect, and validate OGG files.
-n/gnupg-1.4.11-x86_64-1.txz:  Upgraded.
-  Thanks to Markus Reichelt for the reminder.
-n/iptraf-3.0.0-x86_64-4.txz:  Removed.
-n/iptraf-ng-1.0.2-x86_64-1.txz:  Added.
-n/nmap-5.51-x86_64-1.txz:  Upgraded.
-n/openvpn-2.1.4-x86_64-1.txz:  Upgraded.
-x/libXt-1.1.1-x86_64-1.txz:  Upgraded.
-x/radeon_ucode-20110302-noarch-1.txz:  Upgraded.
-  Thanks to Gérard Monpontet for the reminder.
-xap/xfce-4.6.2-x86_64-4.txz:  Rebuilt.
-  Start kde4 services instead of kde3.
-  Load $HOME/.Xmodmap after /etc/X11/xinit/.Xmodmap.  Thanks to Niels Horn.
-testing/packages/mozilla-firefox-4.0rc1-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Wed Mar  9 05:52:06 UTC 2011
-Hey folks, I think it's time for Slackware 13.37 (hopefully this helps
-make up for our lack of code names) release candidate 1!
-After a lot of testing and consideration, we've decided to go with the
-recently released 2.6.37.3 Linux kernel which seems to work best for X,
-contains support for Speakup, and looks like a better kernel branch to
-be using as we move forward.
-Please test so we can have a stable release soon.  :-)
-a/aaa_elflibs-13.37-x86_64-1.txz:  Rebuilt.
-a/aaa_terminfo-5.8-x86_64-1.txz:  Upgraded.
-a/gdisk-0.6.14-x86_64-1.txz:  Added.
-  GPT fdisk is used to partition disks using GPT instead of MBR.
-a/glibc-solibs-2.13-x86_64-2.txz:  Rebuilt.
-a/glibc-zoneinfo-2.13-noarch-2.txz:  Rebuilt.
-  Upgraded to tzcode2011c and tzdata2011c.
-a/kernel-firmware-2.6.37.3-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.37.3-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.37.3-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.37.3-x86_64-1.txz:  Upgraded.
-a/libcgroup-0.37.1-x86_64-1.txz:  Upgraded.
-  Fixed a heap-based buffer overflow that could allow privilege escalation.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1006
- (* Security fix *)
-a/pkgtools-13.37-noarch-1.tgz:  Upgraded.
-  Provide a better mount example in pkgtool.
-  Changed the output of installpkg's --warn option to be useful for making
-  a backup and documented this usage in the man page.  Thanks to Oda.
-ap/vim-7.3.138-x86_64-1.txz:  Upgraded.
-d/kernel-headers-2.6.37.3-x86-1.txz:  Upgraded.
-d/m4-1.4.16-x86_64-1.txz:  Upgraded.
-d/ruby-1.9.1_p431-x86_64-1.txz:  Upgraded.
-k/kernel-source-2.6.37.3-noarch-1.txz:  Upgraded.
-l/glib2-2.28.2-x86_64-1.txz:  Upgraded.
-l/glibc-2.13-x86_64-2.txz:  Rebuilt.
-l/glibc-i18n-2.13-x86_64-2.txz:  Rebuilt.
-  Recompiled against Linux 2.6.37.3 kernel headers.
-l/glibc-profile-2.13-x86_64-2.txz:  Rebuilt.
-l/iso-codes-3.24.2-noarch-1.txz:  Upgraded.
-l/jre-6u24-x86_64-1.txz:  Upgraded.
-l/ncurses-5.8-x86_64-1.txz:  Upgraded.
-l/polkit-0.101-x86_64-1.txz:  Upgraded.
-l/polkit-gnome-0.101-x86_64-1.txz:  Upgraded.
-l/raptor2-2.0.0-x86_64-1.txz:  Removed.
-  This was breaking some things that do not like the raptor2 interfaces.
-  Revert everything to versions using raptor1 for now.
-l/rasqal-0.9.21-x86_64-1.txz:  Reverted.
-  Backed away from newer rasqal versions that require raptor2 for now.
-l/redland-1.0.12-x86_64-1.txz:  Reverted.
-  Don't use 1.0.13 which links raptor2 and is causing compile problems.
-n/bluez-4.89-x86_64-1.txz:  Upgraded.
-n/bluez-hcidump-2.0-x86_64-1.txz:  Upgraded.
-n/dhcp-4.2.1-x86_64-1.txz:  Upgraded.
-n/dhcpcd-5.2.11-x86_64-1.txz:  Upgraded.
-n/dirmngr-1.1.0-x86_64-1.txz:  Upgraded.
-n/gnupg2-2.0.17-x86_64-1.txz:  Upgraded.
-n/gnutls-2.10.5-x86_64-1.txz:  Upgraded.
-n/gpgme-1.3.0-x86_64-1.txz:  Upgraded.
-n/iwlwifi-100-ucode-39.31.5.1-fw-1.txz:  Added.
-  Microcode to support the Intel Centrino Wireless-N chipset.
-n/iwlwifi-5000-ucode-8.83.5.1-fw-1.txz:  Upgraded.
-n/iwlwifi-6000-ucode-9.221.4.1-fw-1.txz:  Upgraded.
-n/iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz:  Added.
-  Microcode to support Intel 6000G2A, 6000G2B, 6150BGN, and 6250AGN wifi.
-n/libksba-1.2.0-x86_64-1.txz:  Upgraded.
-n/nfs-utils-1.2.3-x86_64-1.txz:  Upgraded.
-n/pinentry-0.8.1-x86_64-1.txz:  Upgraded.
-n/samba-3.5.8-x86_64-1.txz:  Upgraded.
-n/yptools-2.12-x86_64-2.txz:  Rebuilt.
-  Upgraded to ypbind-mt-1.32 and ypserv-2.24.
-x/compiz-50c061b29c-x86_64-1.txz:  Upgraded.
-x/fixesproto-5.0-x86_64-1.txz:  Upgraded.
-x/libXfixes-5.0-x86_64-1.txz:  Upgraded.
-x/libXt-1.1.0-x86_64-1.txz:  Upgraded.
-x/util-macros-1.12.0-noarch-1.txz:  Upgraded.
-x/xcompmgr-1.1.5-x86_64-2.txz:  Upgraded.
-  Merged transparency fix.  Thanks to Erik Jan Tromp.
-x/xextproto-7.2.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-synaptics-1.4.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-vmmouse-12.7.0-x86_64-1.txz:  Upgraded.
-x/xf86-video-chips-1.2.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-siliconmotion-1.7.5-x86_64-1.txz:  Upgraded.
-x/xkbcomp-1.2.1-x86_64-1.txz:  Upgraded.
-x/xorg-server-1.9.4-x86_64-2.txz:  Rebuilt.
-  Applied upstream patch to fix EXA color tiling bug.
-x/xorg-server-xephyr-1.9.4-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xnest-1.9.4-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xvfb-1.9.4-x86_64-2.txz:  Rebuilt.
-xap/blueman-r708-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-3.6.15-x86_64-1.txz:  Upgraded.
-  Firefox 3.6.15 is a security and stability update to Firefox 3.6.x.
-  (* Security fix *)
-xap/mozilla-thunderbird-3.1.9-x86_64-1.txz:  Upgraded.
-  Thunderbird 3.1.9 is a security and stability update.
-  (* Security fix *)
-xap/vim-gvim-7.3.138-x86_64-1.txz:  Upgraded.
-extra/jdk-6/jdk-6u24-x86_64-1.txz:  Upgraded.
-extra/source/flashplayer-plugin/:  Upgraded build to version 10_2.111710.
+Mon Jun 25 05:17:48 UTC 2012
+a/aaa_base-14.0-x86_64-1.txz:  Upgraded.
+  Bumped slackware-version to 14.0.
+  Added top level /run directory.
+a/cups-1.5.3-x86_64-1.txz:  Upgraded.
+a/e2fsprogs-1.42.4-x86_64-1.txz:  Upgraded.
+a/gettext-0.18.1.1-x86_64-3.txz:  Rebuilt.
+a/glibc-solibs-2.15-x86_64-4.txz:  Rebuilt.
+a/glibc-zoneinfo-2012b_2012c-noarch-4.txz:  Rebuilt.
+a/kernel-firmware-20120622git-noarch-1.txz:  Upgraded.
+a/kernel-generic-3.2.21-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.21-x86_64-1.txz:  Upgraded.
+  Removed built-in support for legacy Megaraid driver, as it interferes with
+  the drivers for newer cards.  In fact, most Megaraid cards that are not
+  _very_ old will work with the newer megaraid_box driver.  Systems older
+  than that can still be upgraded to -current (or Slackware-next) and will
+  work fine using megaraid.ko and an appropriate initrd (we will still
+  provide the legacy module for the generic kernel).  Hopefully this
+  inconvenience will not affect too many users, but a choice needed to be
+  made in the installer one way or the other, and it seemed better to support
+  new cards than obsolete ones.
+a/kernel-modules-3.2.21-x86_64-1.txz:  Upgraded.
+a/libcgroup-0.38-x86_64-1.txz:  Upgraded.
+a/upower-0.9.16-x86_64-1.txz:  Upgraded.
+ap/ghostscript-9.05-x86_64-1.txz:  Upgraded.
+ap/gutenprint-5.2.8-x86_64-1.txz:  Upgraded.
+ap/hplip-3.12.6-x86_64-1.txz:  Upgraded.
+ap/linuxdoc-tools-0.9.67-x86_64-1.txz:  Upgraded.
+  Thanks to Stuart Winter.
+ap/nano-2.3.1-x86_64-2.txz:  Rebuilt.
+  Add default /etc/nanorc and rebuild with --disable-wrapping-as-root.
+  Thanks to Stuart Winter.
+ap/rpm-4.8.1-x86_64-2.txz:  Rebuilt.
+ap/vim-7.3.556-x86_64-1.txz:  Upgraded.
+d/automake-1.11.5-noarch-1.txz:  Upgraded.
+  Use automake-1.11.5 as the 1.12 series breaks a lot of things for now.
+  Patch to avoid prototype errors with recent perl (the reason that I'd tried
+  to use 1.12.1).
+  Thanks to Willy Sudiarto Raharjo, Robby Workman, and Matt Burgess.
+d/cmake-2.8.8-x86_64-1.txz:  Upgraded.
+d/gcc-4.7.1-x86_64-1.txz:  Upgraded.
+d/gcc-g++-4.7.1-x86_64-1.txz:  Upgraded.
+d/gcc-gfortran-4.7.1-x86_64-1.txz:  Upgraded.
+d/gcc-gnat-4.7.1-x86_64-1.txz:  Upgraded.
+  Thanks to ponce for the link to the -fPIC fix in the git repo.
+d/gcc-go-4.7.1-x86_64-1.txz:  Upgraded.
+d/gcc-java-4.7.1-x86_64-1.txz:  Upgraded.
+  Remove shared libffi which will interfere with (future) system package.
+d/gcc-objc-4.7.1-x86_64-1.txz:  Upgraded.
+d/gdb-7.4.1-x86_64-2.txz:  Rebuilt.
+d/gettext-tools-0.18.1.1-x86_64-3.txz:  Rebuilt.
+d/git-1.7.11-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.2.21-x86-1.txz:  Upgraded.
+d/mercurial-2.2.2-x86_64-1.txz:  Upgraded.
+d/python-2.7.3-x86_64-1.txz:  Upgraded.
+d/subversion-1.7.5-x86_64-2.txz:  Rebuilt.
+d/yasm-1.2.0-x86_64-2.txz:  Rebuilt.
+k/kernel-source-3.2.21-noarch-1.txz:  Upgraded.
+kde/amarok-2.5.0-x86_64-4.txz:  Rebuilt.
+kde/analitza-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ark-4.8.4-x86_64-1.txz:  Upgraded.
+kde/blinken-4.8.4-x86_64-1.txz:  Upgraded.
+kde/calligra-2.4.2-x86_64-1.txz:  Upgraded.
+kde/cantor-4.8.4-x86_64-1.txz:  Upgraded.
+kde/filelight-4.8.4-x86_64-1.txz:  Upgraded.
+kde/gwenview-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kaccessible-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kactivities-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kalgebra-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kalzium-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kamera-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kanagram-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kate-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kbruch-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kcalc-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kcharselect-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kcolorchooser-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kde-baseapps-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kde-runtime-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kde-wallpapers-4.8.4-noarch-1.txz:  Upgraded.
+kde/kde-workspace-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdeadmin-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdeartwork-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdegames-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-mobipocket-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-strigi-analyzer-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-thumbnailers-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdelibs-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdemultimedia-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdenetwork-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdepim-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdepim-runtime-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdepimlibs-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdeplasma-addons-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdesdk-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdetoys-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdewebdev-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kdf-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kfloppy-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kgamma-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kgeography-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kgpg-4.8.4-x86_64-1.txz:  Upgraded.
+kde/khangman-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kig-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kiten-4.8.4-x86_64-1.txz:  Upgraded.
+kde/klettres-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kmag-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kmousetool-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kmouth-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kmplot-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kolourpaint-4.8.4-x86_64-1.txz:  Upgraded.
+kde/konsole-4.8.4-x86_64-1.txz:  Upgraded.
+kde/korundum-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kremotecontrol-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kruler-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ksaneplugin-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ksecrets-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ksnapshot-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kstars-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ktimer-4.8.4-x86_64-1.txz:  Upgraded.
+kde/ktorrent-4.2.1-x86_64-1.txz:  Upgraded.
+kde/ktouch-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kturtle-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kwallet-4.8.4-x86_64-1.txz:  Upgraded.
+kde/kwordquiz-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libkdcraw-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libkdeedu-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libkexiv2-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libkipi-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libksane-4.8.4-x86_64-1.txz:  Upgraded.
+kde/libktorrent-1.2.1_2-x86_64-1.txz:  Upgraded.
+kde/marble-4.8.4-x86_64-1.txz:  Upgraded.
+kde/okular-4.8.4-x86_64-1.txz:  Upgraded.
+kde/oxygen-gtk2-1.2.5-x86_64-1.txz:  Upgraded.
+kde/oxygen-icons-4.8.4-x86_64-1.txz:  Upgraded.
+kde/parley-4.8.4-x86_64-1.txz:  Upgraded.
+kde/perlkde-4.8.4-x86_64-1.txz:  Upgraded.
+kde/perlqt-4.8.4-x86_64-1.txz:  Upgraded.
+kde/printer-applet-4.8.4-x86_64-1.txz:  Upgraded.
+kde/pykde4-4.8.4-x86_64-1.txz:  Upgraded.
+kde/qtruby-4.8.4-x86_64-1.txz:  Upgraded.
+kde/rocs-4.8.4-x86_64-1.txz:  Upgraded.
+kde/smokegen-4.8.4-x86_64-1.txz:  Upgraded.
+kde/smokekde-4.8.4-x86_64-1.txz:  Upgraded.
+kde/smokeqt-4.8.4-x86_64-1.txz:  Upgraded.
+kde/step-4.8.4-x86_64-1.txz:  Upgraded.
+kde/superkaramba-4.8.4-x86_64-1.txz:  Upgraded.
+kde/svgpart-4.8.4-x86_64-1.txz:  Upgraded.
+kde/sweeper-4.8.4-x86_64-1.txz:  Upgraded.
+kdei/calligra-l10n-ca-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-ca@valencia-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-cs-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-da-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-de-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-el-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-en_GB-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-es-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-et-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-fi-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-fr-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-hu-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-it-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-kk-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nb-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nds-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-nl-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pl-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pt-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-pt_BR-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-ru-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-sk-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-sv-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-uk-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-zh_CN-2.4.2-noarch-1.txz:  Upgraded.
+kdei/calligra-l10n-zh_TW-2.4.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ar-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bg-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bs-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca@valencia-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-cs-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-da-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-de-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-el-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-en_GB-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-es-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-et-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-eu-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fa-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fi-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fr-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ga-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-gl-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-he-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hr-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hu-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ia-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-id-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-is-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-it-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ja-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-kk-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-km-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ko-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lt-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lv-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nb-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nds-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nl-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nn-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pa-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pl-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt_BR-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ro-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ru-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-si-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sk-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sl-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sr-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sv-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tg-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-th-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tr-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ug-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-uk-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-vi-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-wa-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_CN-4.8.4-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_TW-4.8.4-noarch-1.txz:  Upgraded.
+l/M2Crypto-0.21.1-x86_64-1.txz:  Upgraded.
+l/PyQt-4.9.1-x86_64-2.txz:  Rebuilt.
+l/QScintilla-2.6.1-x86_64-2.txz:  Rebuilt.
+l/alsa-lib-1.0.25-x86_64-2.txz:  Rebuilt.
+l/attica-0.4.0-x86_64-1.txz:  Upgraded.
+l/boost-1.49.0-x86_64-2.txz:  Rebuilt.
+l/dbus-python-0.83.1-x86_64-2.txz:  Rebuilt.
+l/djvulibre-3.5.25.3-x86_64-1.txz:  Upgraded.
+l/freetype-2.4.10-x86_64-1.txz:  Upgraded.
+  Since freetype-2.4.8 many fixes were made to better handle invalid fonts.
+  Many of them are vulnerabilities (see CVE-2012-1126 up to CVE-2012-1144
+  and SA48320) so all users should upgrade.
+  (* Security fix *)
+l/gamin-0.1.10-x86_64-4.txz:  Rebuilt.
+l/glibc-2.15-x86_64-4.txz:  Rebuilt.
+  Revert a patch included in 2.15 that causes breakage (c5a0802a).
+  Thanks to Chris Vine.
+  Bumped minimum kernel version to 2.6.32.
+l/glibc-i18n-2.15-x86_64-4.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-4.txz:  Rebuilt.
+l/keyutils-1.5.5-x86_64-1.txz:  Added.
+l/lcms-1.19-x86_64-2.txz:  Rebuilt.
+l/libatasmart-0.19-x86_64-1.txz:  Upgraded.
+l/libcaca-0.99.beta18-x86_64-2.txz:  Rebuilt.
+l/libcap-2.22-x86_64-1.txz:  Upgraded.
+l/libffi-3.0.11-x86_64-1.txz:  Added.
+l/libgpod-0.8.2-x86_64-1.txz:  Upgraded.
+l/libgsf-1.14.20-x86_64-2.txz:  Rebuilt.
+l/libical-0.48-x86_64-1.txz:  Upgraded.
+l/libidn-1.25-x86_64-2.txz:  Rebuilt.
+l/libieee1284-0.2.11-x86_64-3.txz:  Rebuilt.
+l/libplist-1.4-x86_64-1.txz:  Upgraded.
+l/libxml2-2.8.0-x86_64-1.txz:  Upgraded.
+l/libxslt-1.1.26-x86_64-2.txz:  Rebuilt.
+l/notify-python-0.1.1-x86_64-2.txz:  Rebuilt.
+l/pil-1.1.7-x86_64-2.txz:  Rebuilt.
+l/pilot-link-0.12.5-x86_64-6.txz:  Rebuilt.
+l/pycairo-1.8.10-x86_64-2.txz:  Rebuilt.
+l/pycups-1.9.61-x86_64-1.txz:  Upgraded.
+l/pygobject-2.26.0-x86_64-2.txz:  Rebuilt.
+l/pygtk-2.22.0-x86_64-2.txz:  Rebuilt.
+l/pyrex-0.9.9-x86_64-2.txz:  Rebuilt.
+l/rasqal-0.9.29-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.10.1-x86_64-1.txz:  Upgraded.
+l/sip-4.13.2-x86_64-2.txz:  Rebuilt.
+l/soprano-2.7.6-x86_64-1.txz:  Upgraded.
+l/system-config-printer-1.3.9-x86_64-1.txz:  Upgraded.
+l/taglib-1.7.2-x86_64-1.txz:  Upgraded.
+l/urwid-1.0.1-x86_64-1.txz:  Upgraded.
+l/virtuoso-ose-6.1.3-x86_64-2.txz:  Rebuilt.
+l/vte-0.28.2-x86_64-1.txz:  Upgraded.
+n/cifs-utils-5.5-x86_64-1.txz:  Added.
+n/cyrus-sasl-2.1.25-x86_64-1.txz:  Upgraded.
+  Thanks to Thibaut Notteboom for pointing out this wasn't compiling.
+n/fetchmail-6.3.21-x86_64-1.txz:  Upgraded.
+n/getmail-4.30.1-x86_64-1.txz:  Upgraded.
+n/iwlwifi-100-ucode-39.31.5.1-fw-1.txz:  Removed.
+n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz:  Removed.
+n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz:  Removed.
+n/iwlwifi-4965-ucode-228.61.2.24-fw-1.txz:  Removed.
+n/iwlwifi-5000-ucode-8.83.5.1-fw-1.txz:  Removed.
+n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz:  Removed.
+n/iwlwifi-6000-ucode-9.221.4.1-fw-1.txz:  Removed.
+n/iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz:  Removed.
+n/mobile-broadband-provider-info-20120614-x86_64-1.txz:  Upgraded.
+n/network-scripts-14.00-noarch-1.txz:  Upgraded.
+  Fixed handling of unique options for DHCP on multiple interfaces.
+  Thanks to irfan.acar and FeyFre.
+  Added support for bridging.
+  Thanks to alienBOB.
+n/nmap-6.00-x86_64-1.txz:  Upgraded.
+n/obexftp-0.23-x86_64-8.txz:  Rebuilt.
+n/pssh-2.3.1-x86_64-1.txz:  Upgraded.
+n/rt2860-firmware-26-fw-1.txz:  Removed.
+n/rt2870-firmware-22-fw-1.txz:  Removed.
+n/rt61-firmware-1.2-fw-1.txz:  Removed.
+n/rt71w-firmware-1.8-fw-1.txz:  Removed.
+n/samba-3.6.5-x86_64-1.txz:  Upgraded.
+x/liberation-fonts-ttf-1.07.2-noarch-1.txz:  Upgraded.
+x/radeon_ucode-20110302-noarch-1.txz:  Removed.
+x/xcb-proto-1.7.1-x86_64-3.txz:  Rebuilt.
+x/xf86-video-modesetting-0.4.0-x86_64-1.txz:  Upgraded.
+x/xpyb-1.3.1-x86_64-2.txz:  Rebuilt.
+xap/blueman-r732-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.10.4-x86_64-3.txz:  Rebuilt.
+xap/seamonkey-2.10.1-x86_64-1.txz:  Upgraded.
+xap/vim-gvim-7.3.556-x86_64-1.txz:  Upgraded.
+xap/xscreensaver-5.15-x86_64-3.txz:  Rebuilt.
+extra/bash-completion/bash-completion-2.0-noarch-1.txz:  Upgraded.
+extra/bittornado/bittornado-0.3.18-noarch-3.txz:  Rebuilt.
+extra/bittorrent/bittorrent-4.4.0-noarch-4.txz:  Rebuilt.
+extra/brltty/brltty-4.4-x86_64-1.txz:  Upgraded.
+extra/emacspeak/emacspeak-36.0-x86_64-1.txz:  Upgraded.
+extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-3.txz:  Rebuilt.
+extra/wicd/wicd-1.7.2.4-x86_64-3.txz:  Upgraded.
 isolinux/initrd.img:  Rebuilt.
 kernels/*:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Wed Mar  2 03:13:56 UTC 2011
-a/btrfs-progs-20110301-x86_64-1.txz:  Added.
-ap/nano-2.3.0-x86_64-1.txz:  Upgraded.
-kde/koffice-2.3.3-x86_64-1.txz:  Upgraded.
-kde/kdevelop-4.2.0-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.2.0-x86_64-1.txz:  Upgraded.
-kdei/koffice-l10n-*-2.3.2-noarch-1.txz:  Upgraded.
-l/neon-0.29.5-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-3.6.14-x86_64-1.txz:  Upgraded.
-  Firefox 3.6.14 is a regular security and stability update to Firefox 3.6.x.
-  (* Security fix *)
-+--------------------------+
-Mon Feb 28 22:19:08 UTC 2011
-n/samba-3.5.7-x86_64-1.txz:  Upgraded.
-  Fix memory corruption denial of service issue.
-  For more information, see:
-    http://www.samba.org/samba/security/CVE-2011-0719
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0719
-  (* Security fix *)
-extra/bash-completion/bash-completion-1.3-noarch-2.txz:  Rebuilt.
-  There have been reports of strange side effects from the contrib scripts
-  (as well as problems with a buggy script shipped with acroread, but
-  there's not much we can do about that).  It seems best to go vanilla on
-  this one and ship the contrib scripts in with the documentation.
-+--------------------------+
-Mon Feb 28 04:13:27 UTC 2011
-a/mkinitrd-1.4.6-x86_64-4.txz:  Rebuilt.
-  Upgraded to busybox-1.18.3.
-  Blacklist some things in /lib/udev.
-  Thanks to Robby Workman.
-a/pcmciautils-017-x86_64-1.txz:  Upgraded.
-n/vsftpd-2.3.4-x86_64-1.txz:  Upgraded.
-xap/blackbox-0.70.1-x86_64-4.txz:  Rebuilt.
-  Support ConsoleKit.  Thanks to Robby Workman.
-xap/fluxbox-1.3.1-x86_64-1.txz:  Upgraded.
-  Support ConsoleKit.  Thanks to Robby Workman.
-xap/fvwm-2.4.20-x86_64-2.txz:  Rebuilt.
-  Support ConsoleKit.  Thanks to Robby Workman.
-xap/sane-1.0.22-x86_64-1.txz:  Upgraded.
-xap/windowmaker-20060427cvs-x86_64-4.txz:  Rebuilt.
-  Support ConsoleKit.  Thanks to Robby Workman.
-xap/xsane-0.998-x86_64-1.txz:  Upgraded.
-extra/kde3-compat/:  Removed.
-+--------------------------+
-Sat Feb 26 04:53:24 UTC 2011
-a/cpufrequtils-008-x86_64-1.txz:  Upgraded.
-a/dosfstools-3.0.11-x86_64-1.txz:  Upgraded.
-ap/ddrescue-1.14-x86_64-1.txz:  Added.
-testing/packages/mozilla-firefox-4.0b12-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Feb 25 01:10:49 UTC 2011
-l/glib2-2.28.1-x86_64-1.txz:  Upgraded.
-l/gtk+2-2.24.1-x86_64-1.txz:  Upgraded.
-l/libwnck-2.30.6-x86_64-1.txz:  Upgraded.
-l/mhash-0.9.9.9-x86_64-3.txz:  Rebuilt.
-  Patch in mhash.h reverted; it exchanged warnings for errors.
-n/bind-9.7.3-x86_64-1.txz:  Upgraded.
-  Fixes "Server Lockup Upon IXFR or DDNS Update Combined with High Query Rate".
-  For more information, see:
-    http://www.isc.org/software/bind/advisories/cve-2011-0414
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0414
-  (* Security fix *)
-n/tin-1.8.3-x86_64-2.txz:  Rebuilt.
-  Fixed keyboard input for UTF-8 locales.  Thanks to Thomas Morper.
-n/wpa_supplicant-0.7.3-x86_64-2.txz:  Rebuilt.
-  Add options CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y.
-  Use upstream dbus service file (with fixed paths).
-  Thanks to Andrew Brouwers.
-x/xterm-267-x86_64-1.txz:  Reverted.
-  Went back to version 267 since the Alt-Enter fullscreen feature introduced
-  in 268 is causing problems for mc and other programs.
-  Thanks to Mikhail Zotov.
-  This same issue is addressed in 269, but presently that does not compile.
-  It is probably a safer bet to just use 267 which had plenty of testing here.
-xap/pan-0.134-x86_64-1.txz:  Upgraded.
-xap/pidgin-2.7.10-x86_64-1.txz:  Upgraded.
-  Fixed potential information disclosure issue in libpurple.
-  (* Security fix *)
-xap/xfce-4.6.2-x86_64-3.txz:  Rebuilt.
-  Patch:  Don't make panel insensitive during plugin moves.
-  Thanks to Robby Workman.
+Sat Jun 16 16:19:36 UTC 2012
+xap/mozilla-firefox-13.0.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release, addressing issues with recent versions of Flash,
+  Hotmail, and rendering of Hebrew text.
+xap/mozilla-thunderbird-13.0.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release, addressing issues with the new Filelink feature,
+  and miscellaneous other stability and display updates.
++--------------------------+
+Thu Jun 14 22:28:49 UTC 2012
+ap/ddrescue-1.16-x86_64-1.txz:  Upgraded.
+d/autoconf-2.69-noarch-1.txz:  Upgraded.
+d/automake-1.12.1-noarch-1.txz:  Upgraded.
+e/emacs-24.1-x86_64-1.txz:  Upgraded.
+l/libdvdread-4.2.0-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.10-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+n/bind-9.9.1_P1-x86_64-1.txz:  Upgraded.
+  This release fixes an issue that could crash BIND, leading to a denial of
+  service.  It also fixes the so-called "ghost names attack" whereby a
+  remote attacker may trigger continued resolvability of revoked domain names.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-1033
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-1667
+  (* Security fix *)
+n/vsftpd-3.0.0-x86_64-1.txz:  Upgraded.
+Yay, X11R7.7 was released!  \ö/
+x/libX11-1.5.0-x86_64-1.txz:  Upgraded.
+x/libXaw-1.0.11-x86_64-1.txz:  Upgraded.
+x/libXft-2.3.1-x86_64-1.txz:  Upgraded.
+x/pixman-0.26.0-x86_64-1.txz:  Upgraded.
+x/transset-1.0.0-x86_64-1.txz:  Added.
+x/xcb-util-image-0.3.9-x86_64-1.txz:  Upgraded.
+x/xcb-util-keysyms-0.3.9-x86_64-1.txz:  Upgraded.
+x/xcb-util-wm-0.3.9-x86_64-1.txz:  Upgraded.
+x/xf86-input-synaptics-1.6.2-x86_64-1.txz:  Upgraded.
+x/xkeyboard-config-2.6-noarch-1.txz:  Upgraded.
+x/xorg-docs-1.7-noarch-1.txz:  Upgraded.
+x/xorg-server-1.12.2-x86_64-1.txz:  Upgraded.
+x/xorg-server-xephyr-1.12.2-x86_64-1.txz:  Upgraded.
+x/xorg-server-xnest-1.12.2-x86_64-1.txz:  Upgraded.
+x/xorg-server-xvfb-1.12.2-x86_64-1.txz:  Upgraded.
+x/xorg-sgml-doctools-1.11-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-13.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+xap/mozilla-thunderbird-13.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+xap/seamonkey-2.10-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
++--------------------------+
+Sat Jun  2 01:03:42 UTC 2012
+As you've possibly noticed by now, slackware.com is back on the air, and
+I'd like to take this opportunity to give a hearty thanks to Mark Post of
+Slack/390 fame for updating the PHP code to make it happen!  Eric Hameleers
+and the rest of the crew also pitched in to help get it installed and
+running on our other server.  Thanks as well to all the folks who emailed
+with offers of hardware, help porting, and other support for the site.
+We really appreciated it.  Viva la vie Slackware!
+d/slacktrack-2.11-x86_64-1.txz:  Upgraded.
+  Don't track files in /var/lib/NetworkManager.  Thanks to Stuart Winter.
+l/gmp-5.0.5-x86_64-1.txz:  Upgraded.
+l/libpcap-1.2.1-x86_64-1.txz:  Upgraded.
+n/iftop-1.0pre2-x86_64-1.txz:  Added.
+  Iftop is used to display bandwidth usage on an interface.
+n/tcpdump-4.2.1-x86_64-1.txz:  Upgraded.
+n/traceroute-2.0.18-x86_64-1.txz:  Upgraded.
+x/libX11-1.4.99.902-x86_64-1.txz:  Upgraded.
+xap/xscreensaver-5.15-x86_64-2.txz:  Rebuilt.
+  Use the xscreensaver-getimage-file from xscreensaver-5.14.  The script
+  in this version of xscreensaver requires libwww-perl, which has been
+  unbundled into 14 separate modules.  Maybe we'll consider it eventually.
++--------------------------+
+Sat May 26 00:11:06 UTC 2012
+Still a few things in need of a rebuild for perl, such as perlkde,
+perlqt, and linuxdoc-tools, but I'd rather not leave things in a
+known-broken state so most everything else should be fixed now.
+There's a couple of other updates, and a patch to glibc that I'm
+hoping will fix the reported crashes with Google Chrome.
+a/glibc-solibs-2.15-x86_64-3.txz:  Rebuilt.
+a/glibc-zoneinfo-2012b_2012c-noarch-3.txz:  Rebuilt.
+  Upgraded to tzdata2012c.
+d/git-1.7.10.3-x86_64-1.txz:  Upgraded.
+d/ruby-1.9.3_p194-x86_64-1.txz:  Upgraded.
+  Thanks to Vincent Batts.
+d/subversion-1.7.5-x86_64-1.txz:  Upgraded.
+d/swig-2.0.6-x86_64-1.txz:  Upgraded.
+l/glibc-2.15-x86_64-3.txz:  Rebuilt.
+  Patched to fix a race condition when not running nscd.
+  Hopefully this will fix some reported crash issues.
+l/glibc-i18n-2.15-x86_64-3.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-3.txz:  Rebuilt.
+l/libcaca-0.99.beta18-x86_64-1.txz:  Upgraded.
+l/pilot-link-0.12.5-x86_64-5.txz:  Rebuilt.
+l/redland-1.0.15-x86_64-3.txz:  Rebuilt.
+  Don't use db-4.2 (this was the last thing linked to it).
+n/net-snmp-5.6.1-x86_64-3.txz:  Rebuilt.
+n/obexftp-0.23-x86_64-7.txz:  Rebuilt.
+tcl/tcl-8.5.11-x86_64-1.txz:  Upgraded.
+tcl/tk-8.5.11-x86_64-1.txz:  Upgraded.
+xap/imagemagick-6.7.7_0-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.10.4-x86_64-2.txz:  Rebuilt.
+xap/xlockmore-5.39-x86_64-1.txz:  Upgraded.
+xap/xscreensaver-5.15-x86_64-1.txz:  Upgraded.
++--------------------------+
+Thu May 24 20:02:09 UTC 2012
+n/httpd-2.4.2-x86_64-2.txz:  Rebuilt.
+  Always install the new rc.httpd.
+n/php-5.4.3-x86_64-3.txz:  Rebuilt.
+  Added --enable-maintainer-zts to the ./configure options.
+  It seems that this option was automatically enabled on the 64-bit side,
+  but not on 32-bit.  I'm still not entirely sure why that happened.  I
+  had a few theories about it, like perhaps httpd was running when one of
+  the PHP packages was compiled, but testing on 32-bit seemed to engage
+  ZTS at random.  The only reliable way to make things work was to specify
+  the option explicitly, so that's what has been done.  If it has to be
+  one way or the other, I think we want a thread-safe PHP that will work
+  with any httpd MPM.  Let me know if there are still any issues, but it
+  should be working properly now.
++--------------------------+
+Wed May 23 20:36:20 UTC 2012
+Well, it appears that going from perl-5.14.x to perl-5.16.x did indeed
+cause some packages that use perl to break.  The first two reports are
+a couple of usual suspects, irssi and xchat.  Probably there are more
+that need an upgrade or recompile, such as:  git, imagemagick, linuxdoc-tools,
+net-snmp, obexftp, perlkde, perlqt, pidgin, pilot-link, subversion, and swig.
+Confirmations on any of these appreciated.  I notice that some of these
+also use Python, so maybe we should just go to Python-2.7.3 first and get
+the breakage over with all at once?
+ap/powertop-2.0-x86_64-1.txz:  Upgraded.
+  Looks like the man page and most translations are gone now.  :/
+  Thanks to Willy Sudiarto Raharjo for the updated build script.
+l/libidn-1.25-x86_64-1.txz:  Upgraded.
+n/irssi-0.8.15-x86_64-5.txz:  Rebuilt.
+  Recompiled to fix perl plugin.
+n/net-tools-1.60-x86_64-4.txz:  Rebuilt.
+  Increased netstat output buffer to fix missing information.
+  Patched netstat to compile with gcc-4.7.0.
+  Thanks to Morten Langlo.
+xap/xchat-2.8.8-x86_64-5.txz:  Rebuilt.
+  Recompiled to fix perl plugin.
++--------------------------+
+Wed May 23 00:14:52 UTC 2012
+ap/mysql-5.5.24-x86_64-2.txz:  Rebuilt.
+  Change default layout to "RPM" to avoid problems with relative paths.
+  Move mysqlaccess.conf from /usr/bin to /etc (and handle in doinst.sh).
+  Thanks to Heinz Wiesinger.
+d/perl-5.16.0-x86_64-1.txz:  Upgraded.
+kde/amarok-2.5.0-x86_64-3.txz:  Rebuilt.
+l/libxml2-2.7.8-x86_64-4.txz:  Rebuilt.
+  Patched an off-by-one error in XPointer that could lead to a crash or
+  possibly the execution of arbitrary code.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3102
+  (* Security fix *)
+n/php-5.4.3-x86_64-2.txz:  Rebuilt.
+  Build all the sapi modules in a single pass, fixing API mismatches.
+  Clean up obsolete ./configure options.
+  Move the --datadir under /usr/share/.
+  Install an init script for php-fpm.
+  Handle php-fpm.conf in doinst.sh and patch it to work out of the box
+  with the init script.
+  Huge thanks to Heinz Wiesinger for these fixes!
+x/libXaw3d-1.6.2-x86_64-2.txz:  Rebuilt.
+  Added some ./configure options to fix segfaults in gv.
+  Thanks to Richard David Sherman.
+x/mesa-8.0.3-x86_64-1.txz:  Upgraded.
+  Thanks to Robby Workman for this and other X related updates.
+x/pixman-0.25.6-x86_64-1.txz:  Upgraded.
+x/xcb-proto-1.7.1-x86_64-2.txz:  Rebuilt.
+  Changed from "noarch".
+x/xdm-1.1.11-x86_64-2.txz:  Rebuilt.
+x/xf86-input-synaptics-1.6.1-x86_64-1.txz:  Upgraded.
+x/xf86-input-vmmouse-12.9.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-wacom-0.15.0-x86_64-2.txz:  Rebuilt.
+  Added udev rules.  Thanks to Jim Diamond.
+x/xf86-video-apm-1.2.4-x86_64-2.txz:  Rebuilt.
+x/xf86-video-i740-1.3.3-x86_64-4.txz:  Rebuilt.
+x/xf86-video-modesetting-0.3.0-x86_64-1.txz:  Upgraded.
+x/xf86-video-openchrome-0.2.906-x86_64-1.txz:  Upgraded.
+x/xf86-video-s3-0.6.4-x86_64-4.txz:  Rebuilt.
+x/xf86-video-s3virge-1.10.5-x86_64-1.txz:  Upgraded.
+x/xinput-1.6.0-x86_64-1.txz:  Upgraded.
+xap/gv-3.7.3-x86_64-2.txz:  Rebuilt.
++--------------------------+
+Sat May 19 20:14:27 UTC 2012
+a/gettext-0.18.1.1-x86_64-2.txz:  Rebuilt.
+a/openssl-solibs-0.9.8x-x86_64-1.txz:  Upgraded.
+  This is a very minor security fix:
+  o Fix DTLS record length checking bug CVE-2012-2333
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2333
+  (* Security fix *)
+ap/mysql-5.5.24-x86_64-1.txz:  Upgraded.
+d/gettext-tools-0.18.1.1-x86_64-2.txz:  Rebuilt.
+d/perl-5.14.2-x86_64-1.txz:  Upgraded.
+  Upgraded bundled perl modules:  DBD-mysql-4.021, DBI-1.620, URI-1.60,
+  and XML-Parser-2.41.
+kde/amarok-2.5.0-x86_64-2.txz:  Rebuilt.
+  Compiled against mysql-5.5.24.
+l/apr-1.4.6-x86_64-1.txz:  Upgraded.
+l/apr-util-1.4.1-x86_64-2.txz:  Upgraded.
+l/neon-0.29.6-x86_64-1.txz:  Upgraded.
+l/qt-4.8.1-x86_64-2.txz:  Rebuilt.
+  Compiled against mysql-5.5.24.
+l/redland-1.0.15-x86_64-2.txz:  Rebuilt.
+  Compiled against mysql-5.5.24.
+n/httpd-2.4.2-x86_64-1.txz:  Upgraded.
+  Changes to ./configure:
+  Added: --enable-mpms-shared=all
+  Removed: --enable-proxy-balancer
+    This is built by default but requires additional configuration or httpd
+    will not run, so we have commented it out in httpd.conf.
+  Removed: --disable-speling
+    This is built and commented out in httpd.conf by default.
+  Moved the location of httpd.pid from /var/run/httpd/ to /var/run in
+  preparation for /var/run eventually pointing to a tmpfs.
+  Thanks to Frank Gingras for preparing the initial upgrade to httpd-2.4.2.
+n/openldap-client-2.4.31-x86_64-1.txz:  Upgraded.
+n/openssl-0.9.8x-x86_64-1.txz:  Upgraded.
+  This is a very minor security fix:
+  o Fix DTLS record length checking bug CVE-2012-2333
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2333
+  (* Security fix *)
+n/php-5.4.3-x86_64-1.txz:  Upgraded.
+  --disable-sigchild (fixes pear and pecl).  Thanks to Matteo Bernardini.
+  --enable-dom
+  Added php-fpm PHP interpreter.  Thanks to Laurens Vets.
+  Relocate /usr/lib{,64}/build/ directory to /usr/lib{,64}/php/build/.
+  Thanks to Matteo Bernardini.
+x/libhangul-0.1.0-x86_64-1.txz:  Upgraded.
+x/scim-hangul-0.3.2-x86_64-3.txz:  Rebuilt.
+xap/MPlayer-20120514-x86_64-1.txz:  Upgraded.
+xap/gv-3.7.3-x86_64-1.txz:  Upgraded.
+xap/pan-0.137-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed May  9 20:16:40 UTC 2012
+extra/wicd/wicd-1.7.2.4-x86_64-2.txz:  Rebuilt.
+  Fixed an input sanitization bug that breaks accepting a passphrase for a new
+  password protected access point.  Patch from upstream.
+  Thanks to Willy Sudiarto Raharjo for the notice.
++--------------------------+
+Tue May  8 21:21:10 UTC 2012
+n/php-5.3.13-x86_64-1.txz:  Upgraded.
+  This release completes a fix for a vulnerability in CGI-based setups.
+  Note: mod_php and php-fpm are not vulnerable to this attack.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2311
+  (* Security fix *)
++--------------------------+
+Mon May  7 18:54:03 UTC 2012
+l/libvncserver-0.9.9-x86_64-1.txz:  Upgraded.
+d/binutils-2.22.52.0.2-x86_64-1.txz:  Upgraded.
+d/oprofile-0.9.7-x86_64-2.txz:  Rebuilt.
+x/xf86-input-keyboard-1.6.1-x86_64-1.txz:  Upgraded.
+x/xf86-input-mouse-1.7.2-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.10.4-x86_64-1.txz:  Upgraded.
+  Fixed possible MSN remote crash.
+  Fixed XMPP remote crash.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2214
+  (* Security fix *)
++--------------------------+
+Sat May  5 02:28:15 UTC 2012
+Hey folks, here are some more updates, including the latest stuff from X.Org.
+Thanks to Robby Workman for updating the X11 build tree, and B. Watson for
+adding useful information to hundreds of X slack-desc files that previously
+contained generic boilerplate.
+a/tree-1.6.0-x86_64-1.txz:  Upgraded.
+d/llvm-3.0-x86_64-1.txz:  Added.
+  This is needed to compile gallium drivers for X, and will probably
+  be useful for other development.  Thanks to Heinz Wiesinger.
+kde/bluedevil-1.2.3-x86_64-1.txz:  Upgraded.
+l/fribidi-0.19.2-x86_64-1.txz:  Upgraded.
+l/libbluedevil-1.9.2-x86_64-1.txz:  Upgraded.
+l/libwnck-2.30.7-x86_64-1.txz:  Upgraded.
+l/startup-notification-0.12-x86_64-1.txz:  Upgraded.
+n/network-scripts-13.42-noarch-1.txz:  Upgraded.
+  Add a 'NetworkManager' option to netconfig.
+  Copy the hostname into NetworkManager.conf.  Thanks to SqdnGuns.
+n/openssh-6.0p1-x86_64-1.txz:  Upgraded.
+x/bigreqsproto-1.1.2-noarch-1.txz:  Upgraded.
+x/bitmap-1.0.6-x86_64-1.txz:  Upgraded.
+x/dri2proto-2.6-x86_64-1.txz:  Upgraded.
+x/font-util-1.3.0-x86_64-1.txz:  Upgraded.
+x/fontsproto-2.1.2-noarch-1.txz:  Upgraded.
+x/freeglut-2.8.0-x86_64-1.txz:  Added.
+x/fslsfonts-1.0.4-x86_64-1.txz:  Upgraded.
+x/fstobdf-1.0.5-x86_64-1.txz:  Upgraded.
+x/glproto-1.4.15-noarch-1.txz:  Upgraded.
+x/iceauth-1.0.5-x86_64-1.txz:  Upgraded.
+x/imake-1.0.5-x86_64-1.txz:  Upgraded.
+x/inputproto-2.2-noarch-1.txz:  Upgraded.
+x/intel-gpu-tools-1.2-x86_64-1.txz:  Upgraded.
+x/kbproto-1.0.6-noarch-1.txz:  Upgraded.
+x/libFS-1.0.4-x86_64-1.txz:  Upgraded.
+x/libICE-1.0.8-x86_64-1.txz:  Upgraded.
+x/libSM-1.2.1-x86_64-1.txz:  Upgraded.
+x/libX11-1.4.99.901-x86_64-1.txz:  Upgraded.
+x/libXScrnSaver-1.2.2-x86_64-1.txz:  Upgraded.
+x/libXau-1.0.7-x86_64-1.txz:  Upgraded.
+x/libXaw-1.0.10-x86_64-1.txz:  Upgraded.
+x/libXaw3d-1.6.2-x86_64-1.txz:  Added.
+x/libXcm-0.5.0-x86_64-1.txz:  Added.
+x/libXcursor-1.1.13-x86_64-1.txz:  Upgraded.
+x/libXdmcp-1.1.1-x86_64-1.txz:  Upgraded.
+x/libXext-1.3.1-x86_64-1.txz:  Upgraded.
+x/libXfont-1.4.5-x86_64-1.txz:  Upgraded.
+x/libXft-2.3.0-x86_64-1.txz:  Upgraded.
+x/libXi-1.6.1-x86_64-1.txz:  Upgraded.
+x/libXinerama-1.1.2-x86_64-1.txz:  Upgraded.
+x/libXmu-1.1.1-x86_64-1.txz:  Upgraded.
+x/libXpm-3.5.10-x86_64-1.txz:  Upgraded.
+x/libXrandr-1.3.2-x86_64-1.txz:  Upgraded.
+x/libXrender-0.9.7-x86_64-1.txz:  Upgraded.
+x/libXres-1.0.6-x86_64-1.txz:  Upgraded.
+x/libXt-1.1.3-x86_64-1.txz:  Upgraded.
+x/libXtst-1.2.1-x86_64-1.txz:  Upgraded.
+x/libXv-1.0.7-x86_64-1.txz:  Upgraded.
+x/libXvMC-1.0.7-x86_64-1.txz:  Upgraded.
+x/libXxf86dga-1.1.3-x86_64-1.txz:  Upgraded.
+x/libXxf86vm-1.1.2-x86_64-1.txz:  Upgraded.
+x/libdmx-1.1.2-x86_64-1.txz:  Upgraded.
+x/libdrm-2.4.33-x86_64-1.txz:  Upgraded.
+x/libfontenc-1.1.1-x86_64-1.txz:  Upgraded.
+x/libpciaccess-0.13.1-x86_64-1.txz:  Upgraded.
+x/libxcb-1.8.1-x86_64-1.txz:  Upgraded.
+x/libxkbfile-1.0.8-x86_64-1.txz:  Upgraded.
+x/listres-1.0.3-x86_64-1.txz:  Upgraded.
+x/lndir-1.0.3-x86_64-1.txz:  Upgraded.
+x/luit-1.1.1-x86_64-1.txz:  Upgraded.
+x/makedepend-1.0.4-x86_64-1.txz:  Upgraded.
+x/mesa-8.0.2-x86_64-1.txz:  Upgraded.
+x/mkfontdir-1.0.7-noarch-1.txz:  Upgraded.
+x/mkfontscale-1.1.0-x86_64-1.txz:  Upgraded.
+x/mtdev-1.1.2-x86_64-1.txz:  Added.
+  This is a multitouch library needed by the evdev and synaptics drivers.
+x/oclock-1.0.3-x86_64-1.txz:  Upgraded.
+x/pixman-0.25.2-x86_64-1.txz:  Upgraded.
+x/recordproto-1.14.2-noarch-1.txz:  Upgraded.
+x/resourceproto-1.2.0-noarch-1.txz:  Upgraded.
+x/scripts-1.0.1-noarch-2.txz:  Removed.
+x/scrnsaverproto-1.2.2-noarch-1.txz:  Upgraded.
+x/sessreg-1.0.7-x86_64-1.txz:  Upgraded.
+x/setxkbmap-1.3.0-x86_64-1.txz:  Upgraded.
+x/smproxy-1.0.5-x86_64-1.txz:  Upgraded.
+x/twm-1.0.7-x86_64-1.txz:  Upgraded.
+x/util-macros-1.17-noarch-1.txz:  Upgraded.
+x/x11perf-1.5.4-x86_64-1.txz:  Upgraded.
+x/xauth-1.0.7-x86_64-1.txz:  Upgraded.
+x/xaw3d-20110415git-x86_64-1.txz:  Removed.
+x/xcb-proto-1.7.1-noarch-1.txz:  Upgraded.
+x/xcb-util-0.3.8-x86_64-1.txz:  Upgraded.
+x/xcb-util-image-0.3.8-x86_64-1.txz:  Added.
+x/xcb-util-keysyms-0.3.8-x86_64-1.txz:  Added.
+x/xcb-util-renderutil-0.3.8-x86_64-1.txz:  Added.
+x/xcb-util-wm-0.3.8-x86_64-1.txz:  Added.
+x/xclipboard-1.1.2-x86_64-1.txz:  Upgraded.
+x/xclock-1.0.6-x86_64-1.txz:  Upgraded.
+x/xcmiscproto-1.2.2-noarch-1.txz:  Upgraded.
+x/xcmsdb-1.0.4-x86_64-1.txz:  Upgraded.
+x/xcompmgr-1.1.6-x86_64-1.txz:  Upgraded.
+x/xcursorgen-1.0.5-x86_64-1.txz:  Upgraded.
+x/xdm-1.1.11-x86_64-1.txz:  Upgraded.
+x/xdpyinfo-1.3.0-x86_64-1.txz:  Upgraded.
+x/xev-1.2.0-x86_64-1.txz:  Upgraded.
+x/xextproto-7.2.1-x86_64-1.txz:  Upgraded.
+x/xf86-input-acecad-1.5.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-aiptek-1.4.1-x86_64-1.txz:  Upgraded.
+x/xf86-input-evdev-2.7.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-joystick-1.6.1-x86_64-1.txz:  Upgraded.
+x/xf86-input-penmount-1.5.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-synaptics-1.6.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-vmmouse-12.8.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-void-1.4.0-x86_64-1.txz:  Upgraded.
+x/xf86-input-wacom-0.15.0-x86_64-1.txz:  Upgraded.
+x/xf86-video-apm-1.2.3-x86_64-2.txz:  Rebuilt.
+x/xf86-video-ark-0.7.4-x86_64-1.txz:  Upgraded.
+x/xf86-video-ast-0.95.00-x86_64-1.txz:  Upgraded.
+x/xf86-video-ati-6.14.4-x86_64-1.txz:  Upgraded.
+x/xf86-video-chips-1.2.4-x86_64-2.txz:  Rebuilt.
+x/xf86-video-cirrus-1.4.0-x86_64-1.txz:  Upgraded.
+x/xf86-video-dummy-0.3.5-x86_64-1.txz:  Upgraded.
+x/xf86-video-glint-1.2.7-x86_64-1.txz:  Upgraded.
+x/xf86-video-i128-1.3.5-x86_64-1.txz:  Upgraded.
+x/xf86-video-i740-1.3.2-x86_64-4.txz:  Rebuilt.
+x/xf86-video-intel-2.19.0-x86_64-1.txz:  Upgraded.
+x/xf86-video-mach64-6.9.1-x86_64-1.txz:  Upgraded.
+x/xf86-video-mga-1.5.0-x86_64-1.txz:  Upgraded.
+x/xf86-video-modesetting-0.1.0-x86_64-1.txz:  Added.
+x/xf86-video-neomagic-1.2.6-x86_64-1.txz:  Upgraded.
+x/xf86-video-nouveau-git_20120323_efd7a52-x86_64-1.txz:  Upgraded.
+x/xf86-video-nv-2.1.18-x86_64-2.txz:  Rebuilt.
+x/xf86-video-openchrome-0.2.905-x86_64-1.txz:  Upgraded.
+x/xf86-video-r128-6.8.2-x86_64-1.txz:  Upgraded.
+x/xf86-video-radeonhd-1.3.0-x86_64-2.txz:  Removed.
+x/xf86-video-rendition-4.2.4+-x86_64-1.txz:  Upgraded.
+x/xf86-video-s3-0.6.3-x86_64-4.txz:  Rebuilt.
+x/xf86-video-s3virge-1.10.4+-x86_64-1.txz:  Upgraded.
+x/xf86-video-savage-2.3.4-x86_64-1.txz:  Upgraded.
+x/xf86-video-siliconmotion-1.7.6-x86_64-1.txz:  Upgraded.
+x/xf86-video-sis-0.10.4-x86_64-1.txz:  Upgraded.
+x/xf86-video-sisusb-0.9.4-x86_64-1.txz:  Removed.
+x/xf86-video-tdfx-1.4.4-x86_64-1.txz:  Upgraded.
+x/xf86-video-tga-1.2.1-x86_64-4.txz:  Rebuilt.
+x/xf86-video-trident-1.3.5-x86_64-1.txz:  Upgraded.
+x/xf86-video-tseng-1.2.4-x86_64-1.txz:  Removed.
+x/xf86-video-v4l-0.2.0-x86_64-5.txz:  Rebuilt.
+x/xf86-video-vesa-2.3.1-x86_64-1.txz:  Upgraded.
+x/xf86-video-vmware-12.0.2-x86_64-1.txz:  Upgraded.
+x/xf86-video-voodoo-1.2.4-x86_64-2.txz:  Rebuilt.
+x/xf86-video-xgi-1.6.0-x86_64-1.txz:  Removed.
+x/xfd-1.1.1-x86_64-1.txz:  Upgraded.
+x/xfontsel-1.0.4-x86_64-1.txz:  Upgraded.
+x/xfs-1.1.2-x86_64-1.txz:  Upgraded.
+x/xgamma-1.0.5-x86_64-1.txz:  Upgraded.
+x/xhost-1.0.5-x86_64-1.txz:  Upgraded.
+x/xinit-1.3.2-x86_64-1.txz:  Upgraded.
+x/xinput-1.5.99.901-x86_64-1.txz:  Upgraded.
+x/xkbcomp-1.2.4-x86_64-1.txz:  Upgraded.
+x/xkbevd-1.1.3-x86_64-1.txz:  Upgraded.
+x/xkeyboard-config-2.5.1-noarch-1.txz:  Upgraded.
+x/xload-1.1.1-x86_64-1.txz:  Upgraded.
+x/xlogo-1.0.4-x86_64-1.txz:  Upgraded.
+x/xlsatoms-1.1.1-x86_64-1.txz:  Upgraded.
+x/xlsclients-1.1.2-x86_64-1.txz:  Upgraded.
+x/xlsfonts-1.0.4-x86_64-1.txz:  Upgraded.
+x/xman-1.1.2-x86_64-1.txz:  Upgraded.
+x/xmodmap-1.0.7-x86_64-1.txz:  Upgraded.
+x/xorg-docs-1.6.99.901-noarch-1.txz:  Upgraded.
+x/xorg-server-1.12.1-x86_64-1.txz:  Upgraded.
+x/xorg-server-xephyr-1.12.1-x86_64-1.txz:  Upgraded.
+x/xorg-server-xnest-1.12.1-x86_64-1.txz:  Upgraded.
+x/xorg-server-xvfb-1.12.1-x86_64-1.txz:  Upgraded.
+x/xorg-sgml-doctools-1.10.99.901-x86_64-1.txz:  Upgraded.
+x/xpr-1.0.4-x86_64-1.txz:  Upgraded.
+x/xprop-1.2.1-x86_64-1.txz:  Upgraded.
+x/xproto-7.0.23-noarch-1.txz:  Upgraded.
+x/xpyb-1.3.1-x86_64-1.txz:  Upgraded.
+x/xrandr-1.3.5-x86_64-1.txz:  Upgraded.
+x/xscope-1.3.1-x86_64-1.txz:  Upgraded.
+x/xset-1.2.2-x86_64-1.txz:  Upgraded.
+x/xterm-278-x86_64-1.txz:  Upgraded.
+x/xtrans-1.2.7-noarch-1.txz:  Upgraded.
+x/xwd-1.0.5-x86_64-1.txz:  Upgraded.
+x/xwininfo-1.1.2-x86_64-1.txz:  Upgraded.
+x/xwud-1.0.4-x86_64-1.txz:  Upgraded.
++--------------------------+
+Mon Apr 30 22:24:10 UTC 2012
+a/tcsh-6.18.01-x86_64-1.txz:  Upgraded.
+  Thanks to jmccue for the notice.
+d/doxygen-1.8.0-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.9.1-x86_64-1.txz:  Upgraded.
+xap/mozilla-thunderbird-12.0.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+  Fixed POP3 filters that move mail to IMAP folders.
+  Fixed loading message body in sub-folders that use fetch headers only.
+  Addressed mail notification issues.
+  Fixed crash in nMsgDatabase.
+xap/seamonkey-2.9.1-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+  Fixed POP3 filters that move mail to IMAP folders.
+  Fixed loading message body in sub-folders that use fetch headers only.
+  Addressed mail notification issues.
+  Fixed crash in nMsgDatabase.
+  Also, the build script and seamonkey-nss.pc were adjusted to fix issues
+  with compiling against Seamonkey NSS.  Thanks to zerouno on LQ.
+extra/wicd/wicd-1.7.2.4-x86_64-1.txz:  Upgraded.
+  Correct the fix for CVE-2012-2095 (and fix other new bugs).
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2095
+  (* Security fix *)
++--------------------------+
+Fri Apr 27 01:07:23 UTC 2012
+a/openssl-solibs-0.9.8w-x86_64-1.txz:  Upgraded.
+  Fixed exploitable integer overflow (incomplete fix for CVE-2012-2110)
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2131
+  (* Security fix *)
+d/gdb-7.4.1-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.9-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+  Removed --enable-system-cairo and added --disable-crashreporter.
+n/lftp-4.3.6-x86_64-1.txz:  Upgraded.
+n/openssl-0.9.8w-x86_64-1.txz:  Upgraded.
+  Fixed exploitable integer overflow (incomplete fix for CVE-2012-2110)
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2131
+  (* Security fix *)
+xap/mozilla-firefox-12.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+  Removed --enable-system-cairo and added --disable-crashreporter.
+xap/mozilla-thunderbird-12.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+  Removed --enable-system-cairo and added --disable-crashreporter.
+xap/seamonkey-2.9-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+  Removed --enable-system-cairo and added --disable-crashreporter.
++--------------------------+
+Mon Apr 23 18:18:31 UTC 2012
+a/openssl-solibs-0.9.8v-x86_64-1.txz
+  Fixes some potentially exploitable buffer overflows.
+  Thanks to Tavis Ormandy, Google Security Team, for discovering this
+  issue and to Adam Langley <agl@chromium.org> for fixing it.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2110
+  (* Security fix *)
+d/gdb-7.4-x86_64-2.txz:  Rebuilt.
+  Changed to --with-python, requested by Benjamin Trigona-Harany.
+  The last time this was tried it caused some problems, as noted in this bug:
+    http://bugs.gentoo.org/show_bug.cgi?id=291328
+  Please test and let me know if any issues remain.
+n/openssl-0.9.8v-x86_64-1.txz
+  Fixes some potentially exploitable buffer overflows.
+  Thanks to Tavis Ormandy, Google Security Team, for discovering this
+  issue and to Adam Langley <agl@chromium.org> for fixing it.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2110
+  (* Security fix *)
+kde/calligra-2.4.0-x86_64-3.txz:  Rebuilt.
+  Applied upstream patch to fix calligrawords compiled with gcc-4.7.0.
+  Thanks to Willy Sudiarto Raharjo and David Gabriel Rodriguez Castillo.
+extra/wicd/wicd-1.7.2.1-x86_64-1.txz:  Upgraded.
+  This fixes a local privilege escalation that allows a user to set arbitrary
+  pre/post-connection scripts through D-Bus which are then executed as the
+  wicd user (generally root).
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2095
+  Thanks to dapal for the workaround allowing us to skip the pybabel
+  requirement (for now), and to Robby Workman for the script update.
+  (* Security fix *)
++--------------------------+
+Fri Apr 20 16:01:36 UTC 2012
+ap/htop-1.0.1-x86_64-1.txz:  Upgraded.
+d/gdb-7.4-x86_64-1.txz:  Upgraded.
++--------------------------+
+Tue Apr 17 16:35:04 UTC 2012
+kde/oxygen-gtk2-1.2.3-x86_64-1.txz:  Upgraded.
+  Addresses crash bugs.
++--------------------------+
+Mon Apr 16 03:26:13 UTC 2012
+kde/calligra-2.4.0-x86_64-2.txz:  Rebuilt.
+  Due to some bugs in Qt (which had already been patched), quite a lot
+  of Calligra will not build if not reassured with "-DIHAVEPATCHEDQT:BOOL=ON".
+  I should have seen that in the release announcement email, sorry.
+  Thanks to alienBOB for the heads-up.
++--------------------------+
+Sat Apr 14 22:06:26 UTC 2012
+Hey folks!  We've merged KDE 4.8.2 and a bunch of new packages that it
+depends upon into -current, thanks in large part to months of work and
+testing by Eric Hameleers.  Note that NetworkManager is included.  If
+you want to use this, make sure to move the new rc.M into place,
+make /etc/rc.d/rc.networkmanager executable, and then add the KDE
+"Network Manager" widget to your desktop.  Have fun!  :-)
+NOTE:  After upgrading, the following obsolete KDE packages should be removed:
+  kdeaccessibility, kdebase, kdebase-runtime, kdebase-workspace,
+  kdebindings, kdeedu, kdegraphics, kdeutils, koffice, konq-plugins,
+  kopete-cryptography, polkit-kde-1, and all koffice-l10n-*.
+a/sysvinit-scripts-1.2-noarch-44.txz:  Rebuilt.
+  rc.S: Handle a top-level /run directory, if it exists.
+  rc.M: Handle rc.networkmanager.
+a/udisks-1.0.4-x86_64-1.txz:  Added.
+a/upower-0.9.15-x86_64-1.txz:  Added.
+d/oprofile-0.9.7-x86_64-1.txz:  Upgraded.
+kde/amarok-2.5.0-x86_64-1.txz:  Upgraded.
+kde/analitza-4.8.2-x86_64-1.txz:  Added.
+kde/ark-4.8.2-x86_64-1.txz:  Added.
+kde/blinken-4.8.2-x86_64-1.txz:  Added.
+kde/bluedevil-1.2.2-x86_64-1.txz:  Added.
+kde/calligra-2.4.0-x86_64-1.txz:  Added.
+kde/cantor-4.8.2-x86_64-1.txz:  Added.
+kde/filelight-4.8.2-x86_64-1.txz:  Added.
+kde/gwenview-4.8.2-x86_64-1.txz:  Added.
+kde/k3b-2.0.2_20120226.git-x86_64-1.txz:  Upgraded.
+kde/kaccessible-4.8.2-x86_64-1.txz:  Added.
+kde/kactivities-4.8.2-x86_64-1.txz:  Added.
+kde/kalgebra-4.8.2-x86_64-1.txz:  Added.
+kde/kalzium-4.8.2-x86_64-1.txz:  Added.
+kde/kamera-4.8.2-x86_64-1.txz:  Added.
+kde/kanagram-4.8.2-x86_64-1.txz:  Added.
+kde/kate-4.8.2-x86_64-1.txz:  Added.
+kde/kaudiocreator-1.3-x86_64-1.txz:  Upgraded.
+kde/kbruch-4.8.2-x86_64-1.txz:  Added.
+kde/kcalc-4.8.2-x86_64-1.txz:  Added.
+kde/kcharselect-4.8.2-x86_64-1.txz:  Added.
+kde/kcolorchooser-4.8.2-x86_64-1.txz:  Added.
+kde/kde-baseapps-4.8.2-x86_64-1.txz:  Added.
+kde/kde-runtime-4.8.2-x86_64-1.txz:  Added.
+kde/kde-wallpapers-4.8.2-noarch-1.txz:  Added.
+kde/kde-workspace-4.8.2-x86_64-1.txz:  Added.
+kde/kdeadmin-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdeartwork-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdegames-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdegraphics-mobipocket-4.8.2-x86_64-1.txz:  Added.
+kde/kdegraphics-strigi-analyzer-4.8.2-x86_64-1.txz:  Added.
+kde/kdegraphics-thumbnailers-4.8.2-x86_64-1.txz:  Added.
+kde/kdelibs-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdemultimedia-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdenetwork-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdepim-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdepim-runtime-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdepimlibs-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdeplasma-addons-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdesdk-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdetoys-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdevelop-4.3.1-x86_64-1.txz:  Upgraded.
+kde/kdevelop-pg-qt-1.0.0-x86_64-1.txz:  Added.
+kde/kdevplatform-1.3.1-x86_64-1.txz:  Upgraded.
+kde/kdewebdev-4.8.2-x86_64-1.txz:  Upgraded.
+kde/kdf-4.8.2-x86_64-1.txz:  Added.
+kde/kfloppy-4.8.2-x86_64-1.txz:  Added.
+kde/kgamma-4.8.2-x86_64-1.txz:  Added.
+kde/kgeography-4.8.2-x86_64-1.txz:  Added.
+kde/kgpg-4.8.2-x86_64-1.txz:  Added.
+kde/khangman-4.8.2-x86_64-1.txz:  Added.
+kde/kig-4.8.2-x86_64-1.txz:  Added.
+kde/kiten-4.8.2-x86_64-1.txz:  Added.
+kde/klettres-4.8.2-x86_64-1.txz:  Added.
+kde/kmag-4.8.2-x86_64-1.txz:  Added.
+kde/kmousetool-4.8.2-x86_64-1.txz:  Added.
+kde/kmouth-4.8.2-x86_64-1.txz:  Added.
+kde/kmplot-4.8.2-x86_64-1.txz:  Added.
+kde/kolourpaint-4.8.2-x86_64-1.txz:  Added.
+kde/konsole-4.8.2-x86_64-1.txz:  Added.
+kde/korundum-4.8.2-x86_64-1.txz:  Added.
+kde/kplayer-0.7.2-x86_64-1.txz:  Added.
+kde/kremotecontrol-4.8.2-x86_64-1.txz:  Added.
+kde/kruler-4.8.2-x86_64-1.txz:  Added.
+kde/ksaneplugin-4.8.2-x86_64-1.txz:  Added.
+kde/ksecrets-4.8.2-x86_64-1.txz:  Added.
+kde/ksnapshot-4.8.2-x86_64-1.txz:  Added.
+kde/kstars-4.8.2-x86_64-1.txz:  Added.
+kde/ktimer-4.8.2-x86_64-1.txz:  Added.
+kde/ktouch-4.8.2-x86_64-1.txz:  Added.
+kde/kturtle-4.8.2-x86_64-1.txz:  Added.
+kde/kwallet-4.8.2-x86_64-1.txz:  Added.
+kde/kwebkitpart-1.2.0_20111116git-x86_64-1.txz:  Added.
+kde/kwordquiz-4.8.2-x86_64-1.txz:  Added.
+kde/libkdcraw-4.8.2-x86_64-1.txz:  Added.
+kde/libkdeedu-4.8.2-x86_64-1.txz:  Added.
+kde/libkexiv2-4.8.2-x86_64-1.txz:  Added.
+kde/libkipi-4.8.2-x86_64-1.txz:  Added.
+kde/libksane-4.8.2-x86_64-1.txz:  Added.
+kde/marble-4.8.2-x86_64-1.txz:  Added.
+kde/networkmanagement-0.9.0-x86_64-1.txz:  Added.
+kde/okular-4.8.2-x86_64-1.txz:  Added.
+kde/oxygen-gtk2-1.2.2_1-x86_64-1.txz:  Added.
+kde/oxygen-icons-4.8.2-x86_64-1.txz:  Upgraded.
+kde/parley-4.8.2-x86_64-1.txz:  Added.
+kde/perlkde-4.8.2-x86_64-1.txz:  Added.
+kde/perlqt-4.8.2-x86_64-1.txz:  Added.
+kde/polkit-kde-agent-1-9d74ae3_20120104git-x86_64-1.txz:  Added.
+kde/polkit-kde-kcmodules-1-001bdf7_20120111git-x86_64-1.txz:  Added.
+kde/printer-applet-4.8.2-x86_64-1.txz:  Added.
+kde/pykde4-4.8.2-x86_64-1.txz:  Added.
+kde/qtruby-4.8.2-x86_64-1.txz:  Added.
+kde/quanta-29a3f8e_20111223git-x86_64-1.txz:  Added.
+kde/rocs-4.8.2-x86_64-1.txz:  Added.
+kde/skanlite-0.8-x86_64-1.txz:  Upgraded.
+kde/smokegen-4.8.2-x86_64-1.txz:  Added.
+kde/smokekde-4.8.2-x86_64-1.txz:  Added.
+kde/smokeqt-4.8.2-x86_64-1.txz:  Added.
+kde/step-4.8.2-x86_64-1.txz:  Added.
+kde/superkaramba-4.8.2-x86_64-1.txz:  Added.
+kde/svgpart-4.8.2-x86_64-1.txz:  Added.
+kde/sweeper-4.8.2-x86_64-1.txz:  Added.
+kde/wicd-kde-0.3.0_bcf27d8-x86_64-1.txz:  Added.
+kdei/calligra-l10n-ca-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-ca@valencia-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-cs-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-da-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-de-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-el-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-en_GB-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-es-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-et-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-fi-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-fr-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-hu-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-it-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-kk-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-nb-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-nds-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-nl-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-pl-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-pt-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-pt_BR-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-ru-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-sk-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-sv-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-uk-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-zh_CN-2.4.0-noarch-1.txz:  Added.
+kdei/calligra-l10n-zh_TW-2.4.0-noarch-1.txz:  Added.
+kdei/kde-l10n-ar-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bg-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-bs-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ca@valencia-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-cs-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-da-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-de-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-el-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-en_GB-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-es-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-et-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-eu-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fa-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fi-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-fr-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ga-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-gl-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-he-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hr-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-hu-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ia-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-id-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-is-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-it-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ja-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-kk-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-km-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ko-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lt-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-lv-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nb-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nds-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nl-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-nn-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pa-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pl-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-pt_BR-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ro-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ru-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-si-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sk-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sl-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sr-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-sv-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tg-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-th-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-tr-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-ug-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-uk-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-vi-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-wa-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_CN-4.8.2-noarch-1.txz:  Upgraded.
+kdei/kde-l10n-zh_TW-4.8.2-noarch-1.txz:  Upgraded.
+l/PyQt-4.9.1-x86_64-1.txz:  Upgraded.
+l/QScintilla-2.6.1-x86_64-1.txz:  Upgraded.
+l/akonadi-1.7.2-x86_64-1.txz:  Upgraded.
+l/attica-0.3.0-x86_64-1.txz:  Upgraded.
+l/boost-1.49.0-x86_64-1.txz:  Upgraded.
+l/clucene-2.3.3.4-x86_64-1.txz:  Upgraded.
+l/ebook-tools-0.2.1-x86_64-1.txz:  Upgraded.
+l/grantlee-0.2.0-x86_64-1.txz:  Added.
+l/herqq-1.0.0-x86_64-1.txz:  Added.
+l/hunspell-1.3.2-x86_64-1.txz:  Upgraded.
+l/lcms2-2.3-x86_64-1.txz:  Added.
+l/libatasmart-0.18-x86_64-1.txz:  Added.
+l/libbluedevil-1.9.1-x86_64-1.txz:  Added.
+l/libdbusmenu-qt-0.9.2-x86_64-1.txz:  Upgraded.
+l/libssh-0.5.2-x86_64-1.txz:  Added.
+l/libvncserver-0.9.8.2-x86_64-1.txz:  Upgraded.
+l/phonon-4.6.0-x86_64-1.txz:  Upgraded.
+l/phonon-gstreamer-4.6.0-x86_64-1.txz:  Added.
+l/phonon-mplayer-1b1fd1f_20110823git-x86_64-1.txz:  Upgraded.
+l/phonon-xine-4.4.4-x86_64-1.txz:  Added.
+l/polkit-qt-1-0.103.0-x86_64-1.txz:  Upgraded.  Moved from kde/.
+l/qt-4.8.1-x86_64-1.txz:  Upgraded.
+l/raptor2-2.0.7-x86_64-1.txz:  Added.
+l/rasqal-0.9.28-x86_64-1.txz:  Upgraded.
+l/redland-1.0.15-x86_64-1.txz:  Upgraded.
+l/sg3_utils-1.33-x86_64-1.txz:  Added.
+l/shared-desktop-ontologies-0.9.0-x86_64-1.txz:  Upgraded.
+l/sip-4.13.2-x86_64-1.txz:  Upgraded.
+l/soprano-2.7.5-x86_64-1.txz:  Upgraded.
+l/strigi-0.7.7-x86_64-1.txz:  Upgraded.
+l/system-config-printer-1.3.2-x86_64-1.txz:  Upgraded.
+n/ModemManager-0.5-x86_64-1.txz:  Added.
+n/NetworkManager-0.9.2.0-x86_64-1.txz:  Added.
+n/mobile-broadband-provider-info-20120117-x86_64-1.txz:  Added.
+n/whois-5.0.15-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Apr 11 21:29:40 UTC 2012
+n/sendmail-8.14.5-x86_64-2.txz:  Rebuilt.
+  Applied an upstream patch to fix SMTP AUTH.
+  Thanks to Alex Bär for the notice.
+n/sendmail-cf-8.14.5-noarch-2.txz:  Rebuilt.
++--------------------------+
+Wed Apr 11 17:16:32 UTC 2012
+l/libmsn-4.2.1-x86_64-1.txz:  Upgraded.
+n/curl-7.25.0-x86_64-1.txz:  Upgraded.
+n/ntp-4.2.6p5-x86_64-1.txz:  Upgraded.
+n/samba-3.5.14-x86_64-1.txz:  Upgraded.
+  This is a security release in order to address a vulnerability that allows
+  remote code execution as the "root" user.  All sites running a Samba
+  server should update to the new Samba package and restart Samba.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-1182
+  (* Security fix *)
+xap/pidgin-2.10.3-x86_64-1.txz:  Upgraded.
+  This update fixes several remotely triggerable crash bugs.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2943
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3184
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3185
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3594
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4601
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4602
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4603
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4939
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-1178
+  (* Security fix *)
++--------------------------+
+Sat Apr  7 21:48:42 UTC 2012
+l/libtiff-3.9.6-x86_64-1.txz:  Upgraded.
+  Patched overflows that could lead to arbitrary code execution when parsing
+  a malformed image file.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-1173
+  (* Security fix *)
+isolinux/initrd.img:  Rebuilt.
+  Use genuine GNU bash instead of busybox ash.  This fixes installer failure
+  caused by exported variables such as TERM failing to propogate to subshells.
+  I'm still not sure what's causing that issue (perhaps a change in glibc?),
+  but using real bash might be better in the long run, as we won't need to
+  avoid bashisms in the scripts.  The original reason bash was avoided was to
+  keep things small for installer floppies, and we're well past that era.
+usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Wed Feb 16 08:05:44 UTC 2011
-a/lvm2-2.02.84-x86_64-1.txz:  Upgraded.
-a/util-linux-2.19-x86_64-1.txz:  Added.
-a/util-linux-ng-2.18-x86_64-2.txz:  Removed.
-d/git-1.7.4.1-x86_64-1.txz:  Upgraded.
-l/exiv2-0.21.1-x86_64-1.txz:  Upgraded.
-l/libxklavier-5.1-x86_64-1.txz:  Upgraded.
-l/mhash-0.9.9.9-x86_64-2.txz:  Rebuilt.
-  Do not #define MUTILS_USE_MHASH_CONFIG in mhash.h.  Thanks to guanx.
-l/seamonkey-solibs-2.1b2-x86_64-1.txz:  Upgraded.
-l/vte-0.26.2-x86_64-1.txz:  Upgraded.
-xap/seamonkey-2.1b2-x86_64-1.txz:  Upgraded.
-xap/xfce-4.6.2-x86_64-2.txz:  Rebuilt.
-  Upgraded to Terminal-0.4.6 and xfce4-dev-tools-4.8.0.
-  Recompiled against libxklavier-5.1.
-xap/xfce4-notifyd-0.1.1-x86_64-1.txz:  Upgraded.
-extra/bash-completion/bash-completion-1.3-noarch-1.txz:  Upgraded.
+Thu Apr  5 21:15:52 UTC 2012
+l/qtscriptgenerator-0.2.0-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Apr  4 15:59:46 UTC 2012
+a/acpid-2.0.16-x86_64-1.txz:  Upgraded.
+xap/mozilla-thunderbird-11.0.1-x86_64-1.txz:  Upgraded.
++--------------------------+
+Thu Mar 29 23:05:19 UTC 2012
+Hey folks...  here's a few upgrade/bugfix packages:
+a/e2fsprogs-1.42.2-x86_64-1.txz:  Upgraded.
+a/xz-5.0.3-x86_64-2.tgz:  Rebuilt.
+xap/imagemagick-6.7.6_2-x86_64-1.txz:  Upgraded.
+  Build twice to avoid breakage when the major library versions change.
++--------------------------+
+Wed Mar 28 02:05:26 UTC 2012
+a/glibc-solibs-2.15-x86_64-2.txz:  Rebuilt.
+  Upstream glibc fix for crashes: "Sort objects before relocations"
+  git commit 6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4
+a/glibc-zoneinfo-2012b_2012b-noarch-2.txz:  Rebuilt.
+l/glibc-2.15-x86_64-2.txz:  Rebuilt.
+l/glibc-i18n-2.15-x86_64-2.txz:  Rebuilt.
+l/glibc-profile-2.15-x86_64-2.txz:  Rebuilt.
 isolinux/initrd.img:  Rebuilt.
-  Support GUID Partition Table (GPT).
+  Fixed the placement of libz.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Support GUID Partition Table (GPT).
-+--------------------------+
-Sun Feb 13 00:17:12 UTC 2011
-kde/kdebase-runtime-4.5.5-x86_64-2.txz:  Rebuilt.
-l/apr-1.4.2-x86_64-2.txz:  Rebuilt.
-  Patched to fix aliasing issue with gcc-4.5.1.
-  Thanks to Virgil-Adrian Teaca and Kirils Solovjovs.
-l/strigi-0.7.2-x86_64-2.txz:  Rebuilt.
-n/httpd-2.2.17-x86_64-3.txz:  Rebuilt.
-  Patched to fix aliasing issue with gcc-4.5.1.
-  Thanks to Virgil-Adrian Teaca and Kirils Solovjovs.
-xap/gkrellm-2.3.5-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sat Feb 12 02:19:33 UTC 2011
-l/raptor-1.4.21-x86_64-1.txz:  Added.
-  It seems we were a bit hasty in getting rid of raptor1, as there are some
-  things (including soprano) that won't yet rebuild with raptor2.
-  We'll keep this around until everything has transitioned to the new raptor.
-  Thanks to Gérard Monpontet.
-+--------------------------+
-Thu Feb 10 21:19:38 UTC 2011
-a/coreutils-8.10-x86_64-1.txz:  Upgraded.
-a/glibc-solibs-2.13-x86_64-1.txz:  Upgraded.
-a/glibc-zoneinfo-2.13-noarch-1.txz:  Upgraded.
-  Upgraded to tzcode2011b and tzdata2011b.
-a/kernel-firmware-2.6.35.11-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.35.11-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.35.11-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.35.11-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.83-x86_64-1.txz:  Upgraded.
-  Fix permissions problem.  Thanks to Gary Langshaw.
-a/minicom-2.5-x86_64-1.txz:  Upgraded.
-a/mkinitrd-1.4.6-x86_64-3.txz:  Rebuilt.
-  Added udevadm settle to init in initrd to fix LVM issues.
-  Thanks to Gary Langshaw.
-a/openssl-solibs-0.9.8r-x86_64-1.txz:  Upgraded.
-  (* Security fix *)
-a/sharutils-4.11-x86_64-1.txz:  Upgraded.
-a/sysvinit-scripts-1.2-noarch-37.txz:  Rebuilt.
-  In rc.6 and rc.K, kill any processes holding NFS volumes open before
-  unmounting those volumes.  Thanks to Jonathan Woithe.
-  Mount Control Groups in rc.S.
-ap/alsa-utils-1.0.24.2-x86_64-1.txz:  Upgraded.
-ap/lxc-0.7.4_rc1-x86_64-1.txz:  Added.
-  Support for Linux Containers based on Control Groups.
-  Thanks to Johannes Schöpfer for assistance.
-ap/mysql-5.1.55-x86_64-1.txz:  Upgraded.
-ap/sudo-1.7.4p6-x86_64-1.txz:  Upgraded.
-  Fix Runas group password checking.
-  For more information, see the included CHANGES and NEWS files, and:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0010
-  (* Security fix *)
-d/gcc-4.5.2-x86_64-2.txz:  Rebuilt.
-  Recompiled against mpfr-3.0.0p08.
-d/gcc-g++-4.5.2-x86_64-2.txz:  Rebuilt.
-d/gcc-gfortran-4.5.2-x86_64-2.txz:  Rebuilt.
-d/gcc-gnat-4.5.2-x86_64-2.txz:  Rebuilt.
-d/gcc-java-4.5.2-x86_64-2.txz:  Rebuilt.
-d/gcc-objc-4.5.2-x86_64-2.txz:  Rebuilt.
-d/kernel-headers-2.6.35.11-x86-1.txz:  Upgraded.
-k/kernel-source-2.6.35.11-noarch-1.txz:  Upgraded.
-kde/kdeartwork-4.5.5-x86_64-2.txz:  Rebuilt.
-kde/kdegraphics-4.5.5-x86_64-2.txz:  Rebuilt.
-kde/kdepim-4.4.10-x86_64-1.txz:  Upgraded.
-kde/kdepim-runtime-4.4.10-x86_64-1.txz:  Upgraded.
-kde/koffice-2.3.1-x86_64-1.txz:  Upgraded.
-kdei/koffice-l10n-*-2.3.1-noarch-1.txz:  Upgraded.
-l/alsa-lib-1.0.24.1-x86_64-1.txz:  Upgraded.
-l/apr-1.4.2-x86_64-1.txz:  Upgraded.
-l/apr-util-1.3.10-x86_64-1.txz:  Upgraded.
-  Fixes a memory leak and DoS in apr_brigade_split_line().
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1623
-  (* Security fix *)
-l/exiv2-0.21-x86_64-1.txz:  Upgraded.
-l/expat-2.0.1-x86_64-2.txz:  Rebuilt.
-  Fixed various crash and hang bugs.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2625
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3560
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3720
-  (* Security fix *)
-l/glibc-2.13-x86_64-1.txz:  Upgraded.
-l/glibc-i18n-2.13-x86_64-1.txz:  Upgraded.
-l/glibc-profile-2.13-x86_64-1.txz:  Upgraded.
-l/libcap-2.20-x86_64-1.txz:  Upgraded.
-  Moved static library to /lib{64} to avoid linking libcap statically.
-  Include <sys/types.h> in <sys/capability.h>.  Thanks to Steve.
-l/libexif-0.6.20-x86_64-1.txz:  Upgraded.
-l/libid3tag-0.15.1b-x86_64-4.txz:  Rebuilt.
-  Fixed ${LIBDIRSUFFIX} in id3tag.pc.  Thanks to Mathieu Bouillaguet.
-l/libmpc-0.8.2-x86_64-2.txz:  Rebuilt.
-l/mpfr-3.0.0p08-x86_64-1.txz:  Upgraded.
-l/poppler-0.16.2-x86_64-1.txz:  Upgraded.
-l/raptor-1.4.21-x86_64-1.txz:  Removed.
-l/raptor2-2.0.0-x86_64-1.txz:  Added.
-l/rasqal-0.9.24-x86_64-1.txz:  Upgraded.
-l/redland-1.0.13-x86_64-1.txz:  Upgraded.
-l/zlib-1.2.5-x86_64-4.txz:  Rebuilt.
-n/httpd-2.2.17-x86_64-2.txz:  Rebuilt.
-  This fixes some denial of service bugs in the bundled libraries.
-  On Slackware we do not use the bundled expat or apr-util, so the
-  issues are also fixed in those external libraries.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3560
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3720
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1623
-  (* Security fix *)
-n/openssh-5.8p1-x86_64-1.txz:  Upgraded.
-n/openssl-0.9.8r-x86_64-1.txz:  Upgraded.
-  This OpenSSL update fixes an "OCSP stapling vulnerability".
-  For more information, see the included CHANGES and NEWS files, and:
-    http://www.openssl.org/news/secadv_20110208.txt
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0014
-  (* Security fix *)
-  Patched certwatch to work with recent versions of "file".
-  Thanks to Ulrich Schäfer and Jan Rafaj.
-x/libpciaccess-0.12.1-x86_64-1.txz:  Upgraded.
-x/mesa-7.9_ccc11aa-x86_64-1.txz:  Upgraded.
-  The Mesa 7.9 branch seems to be a little more stable, but feel free to
-  try out the 7.10 package in /testing.
-x/xf86-video-ati-6.14.0-x86_64-1.txz:  Upgraded.
-  This new driver requires KMS, which is set by default in the new kernel.
-  Otherwise, create /etc/modprobe.d/radeon.conf with this content:
-    options radeon modeset=1
-  Also, the kernel should be booted with vga=normal.
-  Problems have been observed when trying to use KMS after starting a VESA
-  framebuffer console.  Sorry about the penguins.
-x/xorg-server-1.9.4-x86_64-1.txz:  Upgraded.
-x/xorg-server-xephyr-1.9.4-x86_64-1.txz:  Upgraded.
-x/xorg-server-xnest-1.9.4-x86_64-1.txz:  Upgraded.
-x/xorg-server-xvfb-1.9.4-x86_64-1.txz:  Upgraded.
-x/xrdb-1.0.8-x86_64-1.txz:  Upgraded.
-x/xterm-268-x86_64-1.txz:  Upgraded.
-xap/geeqie-1.0-x86_64-2.txz:  Rebuilt.
-xap/gimp-2.6.11-x86_64-2.txz:  Rebuilt.
++--------------------------+
+Mon Mar 26 01:41:11 UTC 2012
+a/acpid-2.0.15-x86_64-1.txz:  Upgraded.
+a/bash-4.2.024-x86_64-1.txz:  Upgraded.
+a/e2fsprogs-1.42.1-x86_64-1.txz:  Upgraded.
+a/glibc-solibs-2.15-x86_64-1.txz:  Upgraded.
+a/glibc-zoneinfo-2012b_2012b-noarch-1.txz:  Upgraded.
+  Upgraded to tzcode2012b and tzdata2012b.
+a/kernel-generic-3.2.13-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.13-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.13-x86_64-1.txz:  Upgraded.
+a/module-init-tools-3.16-x86_64-1.txz:  Upgraded.
+a/xz-5.0.3-x86_64-1.tgz:  Upgraded.
+d/binutils-2.22.52.0.1-x86_64-1.txz:  Upgraded.
+d/ccache-3.1.7-x86_64-1.txz:  Upgraded.
+d/gcc-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-g++-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-gfortran-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-gnat-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-go-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-java-4.7.0-x86_64-1.txz:  Upgraded.
+d/gcc-objc-4.7.0-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.2.13-x86-1.txz:  Upgraded.
+k/kernel-source-3.2.13-noarch-1.txz:  Upgraded.
+l/glibc-2.15-x86_64-1.txz:  Upgraded.
+l/glibc-i18n-2.15-x86_64-1.txz:  Upgraded.
+l/glibc-profile-2.15-x86_64-1.txz:  Upgraded.
+l/gmp-5.0.4-x86_64-1.txz:  Upgraded.
+l/mpfr-3.1.0-x86_64-1.txz:  Upgraded.
+l/virtuoso-ose-6.1.3-x86_64-1.txz:  Upgraded.
+l/zlib-1.2.6-x86_64-1.txz:  Upgraded.
+  Moved shared library to /lib{,64} to prepare for kmod.
+n/bind-9.9.0-x86_64-1.txz:  Upgraded.
+n/obex-data-server-0.4.6-x86_64-1.txz:  Upgraded.
+n/rsync-3.0.9-x86_64-1.txz:  Upgraded.
+xap/imagemagick-6.7.6_1-x86_64-1.txz:  Upgraded.
+  Libraries got a major version number bump, requiring recompiles and/or
+  upgrades to obex-data-server, virtuoso-ose, and xine-lib.
+xap/xine-lib-1.1.19-x86_64-2.txz:  Rebuilt.
 isolinux/initrd.img:  Rebuilt.
+In SeTpartitions, use -d single -m single as it increases performance by
+about 15%, and multiple metadata copies are useless when using a btrfs
+filesystem consisting of a single device or partition (which is all the
+installer currently supports).  Thanks to Luigi Genoni.
 kernels/*:  Upgraded.
-pasture/mesa-7.8.2-x86_64-1.txz:  Added.
-  This might be more stable for certain older video chipsets.
-pasture/xf86-video-ati-6.13.2-x86_64-1.txz:  Added.
-  Provide an alternate ATI driver in case of problems with the latest one.
-testing/packages/mesa-7.10_92a619b-x86_64-1.txz:  Upgraded.
-  There have been some strange bugs reported with Mesa-7.10, and on my own
-  machine I have noticed occasional freezes when X is running, even at the
-  text console.  These effects are not happening when Mesa-7.9 is used
-  instead, so we'll put Mesa-7.10 in /testing for now.
-testing/packages/mozilla-firefox-4.0b11-x86_64-1.txz:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Tue Feb  1 07:24:07 UTC 2011
-x/dmxproto-2.3.1-noarch-1.txz:  Upgraded.
-x/evieext-1.1.1-noarch-1.txz:  Upgraded.
-x/libX11-1.4.1-x86_64-1.txz:  Upgraded.
-x/libXaw-1.0.9-x86_64-1.txz:  Upgraded.
-x/libXi-1.4.1-x86_64-1.txz:  Upgraded.
-x/libXp-1.0.1-x86_64-1.txz:  Upgraded.
-x/libXxf86misc-1.0.3-x86_64-1.txz:  Upgraded.
-x/pixman-0.20.2-x86_64-1.txz:  Upgraded.
-x/printproto-1.0.5-noarch-1.txz:  Upgraded.
-x/rendercheck-1.4-x86_64-1.txz:  Upgraded.
-x/resourceproto-1.1.1-noarch-1.txz:  Upgraded.
-x/twm-1.0.6-x86_64-1.txz:  Upgraded.
-x/x11perf-1.5.3-x86_64-1.txz:  Upgraded.
-x/xbacklight-1.1.2-x86_64-1.txz:  Upgraded.
-x/xbiff-1.0.3-x86_64-1.txz:  Upgraded.
-x/xbitmaps-1.1.1-x86_64-1.txz:  Upgraded.
-x/xcalc-1.0.4.1-x86_64-1.txz:  Upgraded.
-x/xdg-user-dirs-0.13-x86_64-1.txz:  Added.
-x/xeyes-1.1.1-x86_64-1.txz:  Upgraded.
-x/xf86-input-evdev-2.6.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-synaptics-1.3.0-x86_64-2.txz:  Rebuilt.
-x/xf86-video-intel-2.14.0-x86_64-1.txz:  Upgraded.
-x/xf86-video-savage-2.3.2-x86_64-1.txz:  Upgraded.
-x/xf86driproto-2.1.1-noarch-1.txz:  Upgraded.
-x/xf86vidmodeproto-2.3.1-noarch-1.txz:  Upgraded.
-x/xineramaproto-1.2.1-noarch-1.txz:  Upgraded.
-x/xkbevd-1.1.2-x86_64-1.txz:  Upgraded.
-x/xkbprint-1.0.3-x86_64-1.txz:  Upgraded.
-x/xorg-cf-files-1.0.4-noarch-1.txz:  Upgraded.
-x/xorg-docs-1.6-noarch-1.txz:  Upgraded.
-x/xorg-server-1.9.3-x86_64-1.txz:  Upgraded.
-x/xorg-server-xephyr-1.9.3-x86_64-1.txz:  Upgraded.
-x/xorg-server-xnest-1.9.3-x86_64-1.txz:  Upgraded.
-x/xorg-server-xvfb-1.9.3-x86_64-1.txz:  Upgraded.
-x/xorg-sgml-doctools-1.6-x86_64-1.txz:  Upgraded.
-x/xproto-7.0.20-noarch-1.txz:  Upgraded.
-  Thanks to Robby Workman for these X updates!
-xap/x11-ssh-askpass-1.2.4.1-x86_64-2.txz:  Rebuilt.
-  Fixed manpage link.  Thanks to Mikhail Zotov.
-+--------------------------+
-Mon Jan 31 06:06:45 UTC 2011
-a/file-5.05-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.82-x86_64-1.txz:  Upgraded.
-a/ntfs-3g-2011.1.15-x86_64-1.txz:  Upgraded.
-a/smartmontools-5.40-x86_64-1.txz:  Upgraded.
-a/usb_modeswitch-1.1.6-x86_64-1.txz:  Upgraded.
-ap/groff-1.21-x86_64-1.txz:  Upgraded.
-ap/hplip-3.11.1-x86_64-1.txz:  Upgraded.
-  Thanks to Robby Workman.
-l/cairo-1.10.2-x86_64-1.txz:  Upgraded.
-l/eggdbus-0.6-x86_64-1.txz:  Removed.
-  This is no longer used by anything.  Thanks to Andrew Brouwers.
-l/fuse-2.8.5-x86_64-1.txz:  Upgraded.
-l/gst-plugins-base-0.10.32-x86_64-1.txz:  Upgraded.
-l/gst-plugins-good-0.10.27-x86_64-1.txz:  Upgraded.
-l/gstreamer-0.10.32-x86_64-1.txz:  Upgraded.
-l/libpng-1.4.5-x86_64-1.txz:  Upgraded.
-l/seamonkey-solibs-2.1b1-x86_64-3.txz:  Rebuilt.
-  Added libnssdbm3.chk and libnssdbm3.so.  Thanks to crocket.
-n/openssh-5.7p1-x86_64-2.txz:  Rebuilt.
-  Generate ECSDA key in rc.sshd.  Thanks to ponce on LQ.
-x/libdrm-2.4.23-x86_64-1.txz:  Upgraded.
-x/mesa-7.10_84b857e-x86_64-1.txz:  Upgraded.
-x/xf86-video-nouveau-8bb82312-x86_64-1.txz:  Upgraded.
-  This is the actual nouveau driver, added to the main tree for the first time.
-  If you do not want to use this, use upgradepkg to switch to the blacklist
-  package in /extra.
-xap/gnuchess-5.08-x86_64-1.txz:  Upgraded.
-  Upgraded to gnuchess-5.08 and xboard-4.4.4.
-xap/seamonkey-2.1b1-x86_64-3.txz:  Rebuilt.
-extra/xf86-video-nouveau-blacklist/xf86-video-nouveau-blacklist-noarch-1.txz:
-  Moved from xap.
-  This package replaces the xf86-video-nouveau with a config file in
-  /etc/modprobe.d/ that prevents the kernel from loading the nouveau driver.
-  You'll want to use this instead of the xf86-video-nouveau package in xap/ if
-  you plan on using the proprietary X driver from nVidia.
-+--------------------------+
-Thu Jan 27 01:53:26 UTC 2011
-a/hdparm-9.37-x86_64-1.txz:  Upgraded.
-ap/linuxdoc-tools-0.9.66-x86_64-7.txz:  Rebuilt.
-ap/sox-14.3.1-x86_64-2.txz:  Rebuilt.
-  Recompiled to link with libsndfile.  Thanks to David Somero.
-d/git-1.7.3.5-x86_64-2.txz:  Rebuilt.
-d/perl-5.12.3-x86_64-1.txz:  Upgraded.
-d/subversion-1.6.15-x86_64-2.txz:  Rebuilt.
-d/swig-1.3.38-x86_64-2.txz:  Rebuilt.
-kde/k3b-2.0.2-x86_64-2.txz:  Rebuilt.
-  Recompiled to include k3blibsndfiledecoder.so.  Thanks to David Somero.
-kde/kdebindings-4.5.5-x86_64-2.txz:  Rebuilt.
-kdei/kde-l10n-*-4.5.5-noarch-3.txz:  Rebuilt.
-  Fixed accidentally reverting the kdepimlibs translations from 4.5.5 to 4.4.5.
-  Thanks to Eric Hameleers for noticing this.
-l/libsamplerate-0.1.7-x86_64-2.txz:  Rebuilt.
-  Linked sndfile-resample with libsndfile.  Thanks to David Somero.
-l/pilot-link-0.12.5-x86_64-3.txz:  Rebuilt.
-n/bluez-4.87-x86_64-1.txz:  Upgraded.
-n/irssi-0.8.15-x86_64-3.txz:  Rebuilt.
-n/net-snmp-5.6-x86_64-2.txz:  Rebuilt.
-n/ntp-4.2.6p3-x86_64-1.txz:  Upgraded.
-  In the sample ntp.conf, correct and then comment out the lines for
-  multicast so that they do not interfere with normal use.
-  Improve the comments.
-  Thanks to Marin Glibic and Xavier Belanger.
-n/obexftp-0.23-x86_64-5.txz:  Rebuilt.
-n/openssh-5.7p1-x86_64-1.txz:  Upgraded.
-testing/packages/mozilla-firefox-4.0b10-x86_64-1.txz:  Upgraded.
-xap/imagemagick-6.6.6_10-x86_64-1.txz:  Upgraded.
-xap/pidgin-2.7.9-x86_64-3.txz:  Rebuilt.
-xap/xchat-2.8.8-x86_64-3.txz:  Rebuilt.
-+--------------------------+
-Sun Jan 23 08:32:10 UTC 2011
-a/sysvinit-scripts-1.2-noarch-36.txz:  Rebuilt.
-  Fixed unlocking non-root encrypted partitions in rc.S.
-  Thanks to Mikhail Zotov.
-  Updated /sbin/rescan-scsi-bus.
-ap/moc-2.5.0_alpha4-x86_64-1.txz:  Added.
-  This is the MOC console audio player.
-l/aalib-1.4rc5-x86_64-3.txz:  Rebuilt.
-  Adjusted path to libtool scripts.  Thanks to Matteo Bernardini.
-l/libsndfile-1.0.23-x86_64-1.txz:  Added.
-  Needed for WAV support in audacious and moc.
-n/pssh-2.2-x86_64-1.txz:  Upgraded.
-  Install psshlib to proper directory.  Thanks to Matteo Bernardini.
-xap/audacious-2.4.3-x86_64-1.txz:  Upgraded.
-xap/audacious-plugins-2.4.3-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sat Jan 22 23:12:20 UTC 2011
-a/util-linux-ng-2.18-x86_64-2.txz:  Rebuilt.
-  Fix partition type entry in cfdisk.  Thanks to Mario.
-+--------------------------+
-Sat Jan 22 06:01:13 UTC 2011
-a/coreutils-8.9-x86_64-1.txz:  Upgraded.
-a/cryptsetup-1.2.0-x86_64-1.txz:  Upgraded.
-a/cups-1.4.6-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.81-x86_64-1.txz:  Upgraded.
-ap/pm-utils-1.4.1-x86_64-2.txz:  Rebuilt.
-  Set better performance after waking the hard drive.
-  Thanks to Robby Workman.
-d/binutils-2.21.51.0.6-x86_64-1.txz:  Upgraded.
-d/git-1.7.3.5-x86_64-1.txz:  Upgraded.
-d/oprofile-0.9.6-x86_64-5.txz:  Rebuilt.
-kde/kdepimlibs-4.5.5-x86_64-2.txz:  Rebuilt.
-  Patched imap4.cpp to avoid problems with glibc's new memcpy().
-l/shared-mime-info-0.90-x86_64-1.txz:  Upgraded.
-n/lftp-4.1.3-x86_64-1.txz:  Upgraded.
-n/ncftp-3.2.5-x86_64-1.txz:  Upgraded.
-n/rfkill-0.4-x86_64-1.txz:  Added.
-x/xdg-utils-1.1.0_rc1-noarch-1.txz:  Upgraded.
-+--------------------------+
-Wed Jan 19 21:23:28 UTC 2011
-kdei/kde-l10n-*-4.5.5-noarch-2.txz:  Rebuilt.
-  Merged in missing kdepim translations taken from kde-l10n-4.4.5.
-+--------------------------+
-Sun Jan 16 17:58:55 UTC 2011
-kde/k3b-2.0.2-x86_64-1.txz:  Upgraded.
-l/libgpod-0.8.0-x86_64-2.txz:  Rebuilt.
-  Fix bad /tmp permissions caused by a DESTDIR bug.
-  Disable HAL and use udev instead.
-+--------------------------+
-Sat Jan 15 20:43:54 UTC 2011
-kde/amarok-2.4.0-x86_64-1.txz:  Upgraded.
-l/libgpod-0.8.0-x86_64-1.txz:  Upgraded.
-l/liblastfm-0.3.3_f0b3239-x86_64-1.txz:  Upgraded.
-l/libplist-1.3-x86_64-1.txz:  Added.
-+--------------------------+
-Sat Jan 15 04:41:49 UTC 2011
-kde/kdevelop-4.1.2-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.1.2-x86_64-1.txz:  Upgraded.
-testing/packages/mozilla-firefox-4.0b9-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Tue Jan 11 23:14:10 UTC 2011
-d/ccache-3.1.4-x86_64-1.txz:  Upgraded.
-d/doxygen-1.7.3-x86_64-1.txz:  Upgraded.
-d/guile-1.8.8-x86_64-1.txz:  Upgraded.
-d/intltool-0.41.1-x86_64-1.txz:  Upgraded.
-d/mercurial-1.7.3-x86_64-1.txz:  Upgraded.
-d/nasm-2.09.04-x86_64-1.txz:  Upgraded.
-d/yasm-1.1.0-x86_64-1.txz:  Added.
-  Moved from /extra.
-+--------------------------+
-Mon Jan 10 21:41:43 UTC 2011
-a/cxxlibs-6.0.14-x86_64-1.txz:  Upgraded.
-a/glibc-solibs-2.12.2-x86_64-1.txz:  Upgraded.
-a/glibc-zoneinfo-2.12.2-noarch-1.txz:  Upgraded.
-a/kernel-firmware-2.6.35.10-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.35.10-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.35.10-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.35.10-x86_64-1.txz:  Upgraded.
-a/libcgroup-0.37-x86_64-1.txz:  Added.
-a/udev-165-x86_64-2.txz:  Rebuilt.
-  Revert patch to use ata_id, not scsi_id, on ATAPI devices.
-  Using ata_id on ATAPI devices can crash the kernel when udev starts at boot.
-  Thanks to EdGr on LQ for tracking down the responsible commit.
-ap/powertop-1.13-x86_64-1.txz:  Upgraded.
-d/binutils-2.21.51.0.5-x86_64-1.txz:  Upgraded.
-  Ian Lance Taylor's new ELF linker called 'gold' is now included in the
-  binutils package.  The traditional GNU ld remains the default.  To use
-  the gold linker instead, change the /usr/bin/ld symlink to point to ld.gold.
-  Note that gold can not (yet) compile a working Linux kernel.
-d/cmake-2.8.3-x86_64-1.txz:  Upgraded.
-d/gcc-4.5.2-x86_64-1.txz:  Upgraded.
-d/gcc-g++-4.5.2-x86_64-1.txz:  Upgraded.
-d/gcc-gfortran-4.5.2-x86_64-1.txz:  Upgraded.
-d/gcc-gnat-4.5.2-x86_64-1.txz:  Upgraded.
-d/gcc-java-4.5.2-x86_64-1.txz:  Upgraded.
-d/gcc-objc-4.5.2-x86_64-1.txz:  Upgraded.
-d/kernel-headers-2.6.35.10-x86-1.txz:  Upgraded.
-d/oprofile-0.9.6-x86_64-4.txz:  Rebuilt.
-d/ruby-1.9.1_p430-x86_64-2.txz:  Rebuilt.
-  [note, the problem described below does not seem to affect x86_64 but the
-   package was rebuilt anyway to keep things consistent]
-  Forgot to do the magic dance.  Thanks to Vincent Batts.
-  The magic dance involves rebuilding ruby the exact same way until the
-  resulting package works for this test:  ruby -e 'require "dl"'
-  Eight tries were needed to obtain a working package.
-k/kernel-source-2.6.35.10-noarch-1.txz:  Upgraded.
-kde/kaudiocreator-r1212483-x86_64-1.txz:  Upgraded.
-kde/kdeaccessibility-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdeadmin-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdeartwork-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-runtime-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-workspace-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdebindings-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdeedu-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdegames-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdegraphics-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdelibs-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdemultimedia-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdenetwork-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdepimlibs-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdeplasma-addons-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdesdk-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdetoys-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdeutils-4.5.5-x86_64-1.txz:  Upgraded.
-kde/kdewebdev-4.5.5-x86_64-1.txz:  Upgraded.
-kde/ktorrent-4.0.5-x86_64-1.txz:  Upgraded.
-kde/libktorrent-1.0.5_3-x86_64-1.txz:  Upgraded.
-kde/oxygen-icons-4.5.5-x86_64-1.txz:  Upgraded.
-kdei/*:  Upgraded.
-l/glibc-2.12.2-x86_64-1.txz:  Upgraded.
-l/glibc-i18n-2.12.2-x86_64-1.txz:  Upgraded.
-l/glibc-profile-2.12.2-x86_64-1.txz:  Upgraded.
-l/libxml2-2.7.8-x86_64-3.txz:  Rebuilt.
-l/qt-4.7.0_7abde40-x86_64-2.txz:  Rebuilt.
-  Added an upstream patch for QSortFilterProxyModel.
-l/zlib-1.2.5-x86_64-3.txz:  Rebuilt.
-  Moved from /testing.
-  Patched to address a problem with zlib/libxml2 interaction.
-n/php-5.3.5-x86_64-1.txz:  Upgraded.
-  This update fixes an infinite loop with conversions from string to double
-  that may result in a denial of service.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4645
-  (* Security fix *)
-xap/audacious-2.4.2-x86_64-1.txz:  Upgraded.
-xap/audacious-plugins-2.4.2-x86_64-1.txz:  Upgraded.
-xap/xchat-2.8.8-x86_64-2.txz:  Rebuilt.
+Wed Mar 14 09:08:26 UTC 2012
+l/seamonkey-solibs-2.8-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+n/mtr-0.82-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-11.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+xap/mozilla-thunderbird-11.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+xap/seamonkey-2.8-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+y/bsd-games-2.13-x86_64-12.txz:  Rebuilt.  (typo fix)
++--------------------------+
+Sun Feb 26 23:09:05 UTC 2012
+a/kernel-generic-3.2.7-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.7-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.7-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.2.7-x86-1.txz:  Upgraded.
+k/kernel-source-3.2.7-noarch-1.txz:  Upgraded.
 isolinux/initrd.img:  Rebuilt.
 kernels/*:  Upgraded.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Sun Jan  2 05:11:14 UTC 2011
-ap/foomatic-filters-4.0.6-x86_64-1.txz:  Upgraded.
-ap/hplip-3.10.9-x86_64-2.txz:  Rebuilt.
-ap/linuxdoc-tools-0.9.66-x86_64-6.txz:  Rebuilt.
-ap/vim-7.3.094-x86_64-1.txz:  Upgraded.
-d/git-1.7.3.4-x86_64-2.txz:  Rebuilt.
-d/perl-5.12.2-x86_64-1.txz:  Upgraded.
-d/ruby-1.9.1_p430-x86_64-1.txz:  Upgraded.
-d/subversion-1.6.15-x86_64-1.txz:  Upgraded.
-kde/kdebindings-4.5.4-x86_64-4.txz:  Rebuilt.
-l/pilot-link-0.12.5-x86_64-2.txz:  Rebuilt.
-l/slang-2.2.3-x86_64-1.txz:  Upgraded.
-l/taglib-1.6.3-x86_64-1.txz:  Upgraded.
-n/gnutls-2.10.4-x86_64-1.txz:  Upgraded.
-n/irssi-0.8.15-x86_64-2.txz:  Rebuilt.
-n/net-snmp-5.6-x86_64-1.txz:  Upgraded.
-n/ntp-4.2.6p2-x86_64-1.txz:  Upgraded.
-n/obexftp-0.23-x86_64-4.txz:  Rebuilt.
-n/openldap-client-2.4.23-x86_64-1.txz:  Upgraded.
-xap/imagemagick-6.6.6_9-x86_64-1.txz:  Upgraded.
-xap/pidgin-2.7.9-x86_64-2.txz:  Rebuilt.
-xap/vim-gvim-7.3.094-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Dec 31 20:27:47 UTC 2010
-a/coreutils-8.8-x86_64-1.txz:  Upgraded.
-a/e2fsprogs-1.41.14-x86_64-1.txz:  Upgraded.
-ap/gphoto2-2.4.10-x86_64-1.txz:  Upgraded.
-ap/lsscsi-0.24-x86_64-1.txz:  Upgraded.
-ap/mpg123-1.13.0-x86_64-1.txz:  Upgraded.
-kde/koffice-2.3.0-x86_64-1.txz:  Upgraded.
-kdei/koffice-l10n-*:  Upgraded.
-l/libgphoto2-2.4.10.1-x86_64-1.txz:  Upgraded.
-l/system-config-printer-1.2.5-x86_64-1.txz:  Upgraded.
-n/dhcpcd-5.2.9-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Wed Dec 29 04:04:59 UTC 2010
-kde/kdebindings-4.5.4-x86_64-3.txz:  Rebuilt.
-  Fixed pykdeuic4 compiler to work with PyQt 4.8.x.
-kde/kdepim-4.4.9-x86_64-1.txz:  Upgraded.
-kde/kdepim-runtime-4.4.9-x86_64-1.txz:  Upgraded.
-kde/skanlite-0.7-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Tue Dec 28 20:14:11 UTC 2010
-ap/ghostscript-9.00-x86_64-2.txz:  Rebuilt.
-  Added upstream patch to fix joining PDF files.
-  Thanks to rvdboom on LQ.
-n/bluez-4.84-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Mon Dec 27 18:47:35 UTC 2010
-a/mdadm-3.1.4-x86_64-1.txz:  Upgraded.
-xap/pidgin-2.7.9-x86_64-1.txz:  Upgraded.
-  Fixed denial-of-service flaw in the MSN protocol.
-  (* Security fix *)
-+--------------------------+
-Fri Dec 24 00:53:19 UTC 2010
-a/acpid-2.0.7-x86_64-1.txz:  Upgraded.
-a/dbus-1.4.1-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.79-x86_64-1.txz:  Upgraded.
-a/mkinitrd-1.4.6-x86_64-2.txz:  Rebuilt.
-  Properly handle module options.  Thanks to crocket.
-l/freetype-2.4.4-x86_64-1.txz:  Upgraded.
-n/bluez-4.81-x86_64-1.txz:  Upgraded.
-n/php-5.3.4-x86_64-1.txz:  Upgraded.
-  This fixes many bugs, including some security issues.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2950
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3436
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3710
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4150
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4409
-  (* Security fix *)
-n/proftpd-1.3.3d-x86_64-1.txz:  Upgraded.
-  This update fixes an unbounded copy operation in sql_prepare_where() that
-  could be exploited to execute arbitrary code.  However, this only affects
-  servers that use the sql_mod module (which Slackware does not ship), and
-  in addition the ability to exploit this depends on an SQL injection bug
-  that was already fixed in proftpd-1.3.2rc2 (this according to upstream).
-  So in theory, this fix should only be of academic interest.
-  But in practice, better safe than sorry.
-  (* Security fix *)
-+--------------------------+
-Wed Dec 22 01:55:12 UTC 2010
-ap/cdrtools-3.01a02-x86_64-1.txz:  Upgraded.
-l/seamonkey-solibs-2.1b1-x86_64-2.txz:  Rebuilt.
-  Added libmozsqlite3.so, needed by rpm.
-xap/seamonkey-2.1b1-x86_64-2.txz:  Rebuilt.
-testing/packages/mozilla-firefox-4.0b8-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sun Dec 19 05:22:46 UTC 2010
-a/udev-165-x86_64-1.txz:  Upgraded.
-d/git-1.7.3.4-x86_64-1.txz:  Upgraded.
-  Fixes XSS in gitweb.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3906
-  (* Security fix *)
-l/ConsoleKit-0.4.3-x86_64-1.txz:  Upgraded.
-l/jre-6u23-x86_64-1.txz:  Upgraded.
-l/phonon-mplayer-20101213-x86_64-1.txz:  Added.
-  To use this, go into the KDE system settings > Multimedia > Phonon >
-  Backend, and move the mplayer phonon backend to the highest priority.
-  Thanks to Eric Hameleers.
-xap/MPlayer-20101218-x86_64-1.txz:  Upgraded.
-extra/jdk-6/jdk-6u23-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Thu Dec 16 18:57:05 UTC 2010
-a/aaa_elflibs-13.2-x86_64-5.txz:  Rebuilt.
-a/cups-1.4.5-x86_64-2.txz:  Rebuilt.
-  Patched a locking bug that could cause print dialog crashes in Firefox
-  if gnome-vfs is installed.
-a/e2fsprogs-1.41.13-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.78-x86_64-1.txz:  Upgraded.
-a/udev-164-x86_64-4.txz:  Rebuilt.
-  Fixed /dev/root creation in rc.udev.
-  Thanks to Corrado Franco and Emanuele Tomasi from slacky.eu.
-a/usbutils-001-x86_64-1.txz:  Upgraded.
-ap/man-pages-3.32-noarch-1.txz:  Upgraded.
-d/automake-1.11.1-noarch-2.txz:  Rebuilt.
-  Compress man pages.
-d/bison-2.4.3-x86_64-2.txz:  Rebuilt.
-  Compress yacc.1.
-l/glib2-2.26.1-x86_64-2.txz:  Rebuilt.
-  Add schema compilation to the install script.
-l/gtk+2-2.22.1-x86_64-3.txz:  Rebuilt.
-  Moved system gtkrc to /etc/gtk-2.0/.  This fixes some issues with KDE.
-l/libkarma-0.1.1-x86_64-2.txz:  Rebuilt.
-  Fix manpage perms.  Thanks to Mikhail Zotov.
-l/libnotify-0.5.2-x86_64-1.txz:  Upgraded.
-n/bind-9.7.2_P3-x86_64-1.txz:  Upgraded.
-  This update fixes some security issues.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3613
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3614
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3615
-  (* Security fix *)
-n/dhcp-4.2.0_P2-x86_64-1.txz:  Upgraded.
-n/lftp-4.1.1-x86_64-1.txz:  Upgraded.
-xap/xfce-4.6.2-x86_64-1.txz:  Upgraded.
-  Thanks to Robby Workman.
-xap/xfce4-notifyd-0077b29e-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Dec 10 03:57:27 UTC 2010
-kde/kdebindings-4.5.4-x86_64-2.txz:  Rebuilt.
-  Moved perl modules from site_perl to vendor_perl.
-l/soprano-2.5.2-x86_64-2.txz:  Rebuilt.
-  Recompiled against JDK to enable the sesame2 backend.
-  Thanks to Eric Hameleers.
-xap/mozilla-firefox-3.6.13-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
+Sat Feb 25 20:36:42 UTC 2012
+testing/packages/mozilla-firefox-11.0b4-x86_64-1.txz:  Upgraded.
+testing/packages/mozilla-thunderbird-11.0b3-x86_64-1.txz:  Upgraded.
+testing/packages/seamonkey-2.8b4-x86_64-1.txz:  Upgraded.
+testing/packages/seamonkey-solibs-2.8b4-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Feb 22 18:14:58 UTC 2012
+l/libpng-1.4.9-x86_64-1.txz:  Upgraded.
+  All branches of libpng prior to versions 1.5.9, 1.4.9, 1.2.47, and 1.0.57,
+  respectively, fail to correctly validate a heap allocation in
+  png_decompress_chunk(), which can lead to a buffer-overrun and the
+  possibility of execution of hostile code on 32-bit systems.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3026
   (* Security fix *)
-xap/mozilla-thunderbird-3.1.7-x86_64-1.txz:  Upgraded.
-  This upgrade fixes some more security bugs.
+l/seamonkey-solibs-2.7.2-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/thunderbird31.html
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
   (* Security fix *)
-+--------------------------+
-Wed Dec  8 21:37:24 UTC 2010
-kdei/kde-l10n-ia-4.5.4-noarch-2.txz:  Rebuilt.
-  New slack-desc.  Thanks to Erik Jan Tromp.
-l/zlib-1.2.5-x86_64-2.txz:  Rebuilt.
-  Added zlib.pc.
-testing/packages/zlib-1.2.5-x86_64-3.txz:  Rebuilt.
-  This is a first attempt to patch an issue with the way libxml2 uses zlib.
-  Please test.
-+--------------------------+
-Tue Dec  7 18:50:58 UTC 2010
-l/libxml2-2.7.8-x86_64-2.txz:  Rebuilt.
-  Disabled shared library versioning that broke the ABI.
-+--------------------------+
-Tue Dec  7 05:01:53 UTC 2010
-a/aaa_elflibs-13.2-x86_64-4.txz:  Rebuilt.
-  Added libltdl.so.7.3.0.
-a/openssl-solibs-0.9.8q-x86_64-1.txz
-  (* Security fix *)
-kde/k3b-2.0.1-x86_64-2.txz:  Rebuilt.
-  Patched to fix a settings crash with Qt 4.7.x.
-  Thanks to Grigorios Bouzakis.
-l/libspectre-0.2.5-x86_64-2.txz:  Rebuilt.
-l/libxml2-2.7.8-x86_64-1.txz:  Upgraded.
-n/openssl-0.9.8q-x86_64-1.txz:  Upgraded.
-  This OpenSSL update contains some security related bugfixes.
-  For more information, see the included CHANGES and NEWS files, and:
-    http://www.openssl.org/news/secadv_20101202.txt
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4180
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-4252
-  (* Security fix *)
-+--------------------------+
-Sat Dec  4 06:49:42 UTC 2010
-a/sysvinit-scripts-1.2-noarch-35.txz:  Rebuilt.
-  In rc.M, try to start rc.consolekit.
-ap/rpm-4.8.1-x86_64-1.txz:  Upgraded.
-kde/amarok-2.3.2-x86_64-1.txz:  Upgraded.
-kde/kdeaccessibility-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdeadmin-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdeartwork-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdebase-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdebase-runtime-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdebase-workspace-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdebindings-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdeedu-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdegames-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdegraphics-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdelibs-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdemultimedia-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdenetwork-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdepim-4.4.7-x86_64-1.txz:  Upgraded.
-kde/kdepim-runtime-4.4.7-x86_64-1.txz:  Upgraded.
-kde/kdepimlibs-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdeplasma-addons-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdesdk-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdetoys-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdeutils-4.5.4-x86_64-1.txz:  Upgraded.
-kde/kdevelop-4.1.1-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.1.1-x86_64-1.txz:  Upgraded.
-kde/kdewebdev-4.5.4-x86_64-1.txz:  Upgraded.
-kde/konq-plugins-4.4.0-x86_64-2.txz:  Rebuilt.
-kde/ktorrent-4.0.4-x86_64-1.txz:  Upgraded.
-kde/libktorrent-1.0.4-x86_64-1.txz:  Upgraded.
-kde/oxygen-icons-4.5.4-x86_64-1.txz:  Upgraded.
-kdei/*:  Upgraded.
-l/ConsoleKit-0.4.2-x86_64-1.txz:  Upgraded.
-l/gstreamer-0.10.31-x86_64-1.txz:  Upgraded.
-l/gst-plugins-base-0.10.31-x86_64-1.txz:  Upgraded.
-l/libarchive-2.8.4-x86_64-1.txz:  Upgraded.
-l/libgsf-1.14.19-x86_64-1.txz:  Upgraded.
-l/polkit-0.99-x86_64-1.txz:  Upgraded.
-l/polkit-gnome-0.99-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Tue Nov 30 23:39:25 UTC 2010
-l/akonadi-1.4.1-x86_64-2.txz:  Rebuilt.
-  Recompiled against boost-1.45.0.
-l/jre-6u22-x86_64-1.txz:  Upgraded.
-n/wpa_supplicant-0.7.3-x86_64-1.txz:  Upgraded.
-xap/pidgin-2.7.7-x86_64-1.txz:  Upgraded.
-  This update fixes connection issues for AIM and MSN.
-extra/jdk-6/jdk-6u22-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Mon Nov 29 22:00:24 UTC 2010
-a/coreutils-8.7-x86_64-1.txz:  Upgraded.
-a/cups-1.4.5-x86_64-1.txz:  Upgraded.
-  Fixed a memory corruption bug that could lead to a denial of service
-  or possibly execution of arbitrary code through a crafted IPP request.
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2941
-  (* Security fix *)
-a/sysvinit-scripts-1.2-noarch-34.txz:  Rebuilt.
-  Removed unnecessary (and broken) LVM umount section of rc.6.
-  Thanks to Gary Langshaw.
-ap/ghostscript-9.00-x86_64-1.txz:  Upgraded.
-ap/gutenprint-5.2.6-x86_64-1.txz:  Upgraded.
-ap/hplip-3.10.9-x86_64-1.txz:  Upgraded.
-ap/nano-2.2.6-x86_64-1.txz:  Upgraded.
-ap/sqlite-3.7.3-x86_64-1.txz:  Upgraded.
-d/gdb-7.2-x86_64-1.txz:  Upgraded.
-d/python-2.6.6-x86_64-1.txz:  Upgraded.
-l/PyQt-4.8.1-x86_64-1.txz:  Upgraded.
-l/QScintilla-2.4.5-x86_64-1.txz:  Upgraded.
-l/boost-1.45.0-x86_64-1.txz:  Upgraded.
-l/phonon-4.4.3-x86_64-1.txz:  Upgraded.
-l/rasqal-0.9.20-x86_64-1.txz:  Upgraded.
-l/redland-1.0.12-x86_64-1.txz:  Upgraded.
-l/seamonkey-solibs-2.1b1-x86_64-1.txz:  Upgraded.
-l/sip-4.11.2-x86_64-1.txz:  Upgraded.
-n/iproute2-2.6.35-x86_64-2.txz:  Rebuilt.
-  Patched to fix "ip route get x.x.x.x returns NULL".
-  Thanks to Alan Brantley.
-x/xterm-267-x86_64-1.txz:  Upgraded.
-xap/gv-3.7.1-x86_64-1.txz:  Upgraded.
-xap/imagemagick-6.6.6_1-x86_64-1.txz:  Upgraded.
-xap/seamonkey-2.1b1-x86_64-1.txz:  Upgraded.
-  It looks like we need this for the Gecko engine update.  It is beta,
-  but it works fine here.  Certainly it's better than sticking with a
-  stable version that's broken when run against our cairo/GTK+ versions.
-pasture/gxine-0.5.905-x86_64-1.txz:  Moved to /pasture.
-  Gxine uses some really old, long deprecated, and now finally dropped
-  features of libmozjs.so, and no longer runs or compiles.  Unless someone
-  wants to port it to the new Ja:gerMonkey engine, it might be dead.
-+--------------------------+
-Mon Nov 22 04:11:40 UTC 2010
-a/openssl-solibs-0.9.8p-x86_64-1.txz:  Upgraded.
- (* Security fix *)
-ap/mysql-5.1.53-x86_64-1.txz:  Upgraded.
-l/akonadi-1.4.1-x86_64-1.txz:  Upgraded.
-l/qt-4.7.0_7abde40-x86_64-1.txz:  Upgraded.
-l/soprano-2.5.2-x86_64-1.txz:  Upgraded.
-n/openssl-0.9.8p-x86_64-1.txz:  Upgraded.
-  This OpenSSL update contains some security related bugfixes.
-  For more information, see the included CHANGES and NEWS files, and:
-    http://www.openssl.org/news/secadv_20101116.txt
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2939
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3864
- (* Security fix *)
-x/mesa-7.9-x86_64-2.txz:  Rebuilt.
-  Added --enable-xcb and --enable-gallium-nouveau.
-x/xorg-server-1.9.2-x86_64-3.txz:  Rebuilt.
-  Patched to try nouveau before nv.
-x/xorg-server-xephyr-1.9.2-x86_64-3.txz:  Rebuilt.
-x/xorg-server-xnest-1.9.2-x86_64-3.txz:  Rebuilt.
-x/xorg-server-xvfb-1.9.2-x86_64-3.txz:  Rebuilt.
-+--------------------------+
-Sat Nov 20 22:28:56 UTC 2010
-l/libdbusmenu-qt-0.6.4-x86_64-1.txz:  Upgraded.
-xap/xpdf-3.02pl5-x86_64-1.txz:  Upgraded.
-  This update fixes security issues that could lead to an
-  application crash, or execution of arbitrary code.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3702
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3703
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3704
-  (* Security fix *)
-+--------------------------+
-Sat Nov 20 01:28:23 UTC 2010
-a/udev-164-x86_64-3.txz:  Rebuilt.
-  Restored a chunk of rc.udev to generate add events on coldplug.
-n/bluez-4.79-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Thu Nov 18 00:05:34 UTC 2010
-l/gtk+2-2.22.1-x86_64-2.txz:  Rebuilt.
-  Changed GTK2_RC_FILES to favor the settings in $HOME/.gtkrc-2.0.
-  Thanks to Fidori on LQ.
-+--------------------------+
-Tue Nov 16 23:38:13 UTC 2010
-a/aaa_elflibs-13.2-x86_64-3.txz:  Rebuilt.
-  Upgraded libfreetype, libglib-2.0, libgmodule-2.0, libgobject-2.0,
-  and libgthread-2.0.
-a/lvm2-2.02.76-x86_64-1.txz:  Upgraded.
-a/module-init-tools-3.12-x86_64-2.txz:  Rebuilt.
-  Move deprecated /etc/modprobe.conf to /etc/modprobe.conf.obsolete, and
-  remove the symbolic link to /etc/modprobe.conf.
-a/sdparm-1.06-x86_64-1.txz:  Upgraded.
-a/sysvinit-scripts-1.2-noarch-33.txz:  Rebuilt.
-  Change crond log level to 'notice'.  Thanks to Michiel Broek.
-  Only mount usbfs if it is in /etc/fstab.  Thanks to David Somero.
-a/udev-164-x86_64-2.txz:  Rebuilt.
-  Set rfkill device writable by netdev group.
-l/gdk-pixbuf2-2.22.1-x86_64-2.txz:  Rebuilt.
-  Added some noise reduction to the install script.
-l/glib2-2.26.1-x86_64-1.txz:  Upgraded.
-l/gtk+2-2.22.1-x86_64-1.txz:  Upgraded.
-l/hal-0.5.14-x86_64-3.txz:  Rebuilt.
-  Applied upstream crash fix.  Thanks to Robby Workman.
-l/libvorbis-1.3.2-x86_64-1.txz:  Upgraded.
-n/ca-certificates-20090814-noarch-1.txz:  Added.
-n/httpd-2.2.17-x86_64-1.txz:  Upgraded.
-  Fixed logrotate script.  Thanks to allend on LQ.
-x/font-adobe-100dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-adobe-75dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-100dpi-1.0.4-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-75dpi-1.0.4-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-type1-1.0.4-noarch-1.txz:  Upgraded.
-x/font-arabic-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-100dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-75dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-type1-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bitstream-100dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bitstream-75dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bitstream-speedo-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bitstream-type1-1.0.3-noarch-1.txz:  Upgraded.
-x/font-cronyx-cyrillic-1.0.3-noarch-1.txz:  Upgraded.
-x/font-cursor-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-daewoo-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-dec-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-ibm-type1-1.0.3-noarch-1.txz:  Upgraded.
-x/font-isas-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-jis-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-micro-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-misc-cyrillic-1.0.3-noarch-1.txz:  Upgraded.
-x/font-misc-ethiopic-1.0.3-noarch-1.txz:  Upgraded.
-x/font-misc-meltho-1.0.3-noarch-1.txz:  Upgraded.
-x/font-misc-misc-1.1.2-noarch-1.txz:  Upgraded.
-x/font-mutt-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-schumacher-misc-1.1.2-noarch-1.txz:  Upgraded.
-x/font-screen-cyrillic-1.0.4-noarch-1.txz:  Upgraded.
-x/font-sony-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-sun-misc-1.0.3-noarch-1.txz:  Upgraded.
-x/font-winitzki-cyrillic-1.0.3-noarch-1.txz:  Upgraded.
-x/font-xfree86-type1-1.0.4-noarch-1.txz:  Upgraded.
-x/xorg-server-1.9.2-x86_64-2.txz:  Rebuilt.
-  Patched to fix a crash when using Xinerama.
-  Thanks to Jules Villard for pointing out the upstream patch.
-x/xorg-server-xephyr-1.9.2-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xnest-1.9.2-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xvfb-1.9.2-x86_64-2.txz:  Rebuilt.
-+--------------------------+
-Sun Nov 14 23:58:42 UTC 2010
-Lots of updates, including a major X overhaul!
-Thanks to Robby Workman for a ton of help here.
-a/aaa_elflibs-13.2-x86_64-2.txz:  Rebuilt.
-  Added libtalloc.so.2.
-  Added liblzma.so.0.0.0 to ease the transition to xz-5.0.0.
-a/acpid-2.0.6-x86_64-1.txz:  Upgraded.
-a/coreutils-8.6-x86_64-1.txz:  Upgraded.
-a/cryptsetup-1.1.3-x86_64-1.txz:  Upgraded.
-a/dbus-1.4.0-x86_64-1.txz:  Upgraded.
-a/e2fsprogs-1.41.12-x86_64-1.txz:  Upgraded.
-a/gettext-0.18.1.1-x86_64-1.txz:  Upgraded.
-a/lvm2-2.02.75-x86_64-1.txz:  Upgraded.
-a/mkinitrd-1.4.6-x86_64-1.txz:  Upgraded.
-  Upgraded to busybox-1.17.3.
-  Use modprobe instead of insmod.
-  Enable udev on the initrd by default.
-  Copy /etc/modprobe.d/* to initrd (and add a new option to NOT do that).
-  Thanks to Robby Workman.
-a/module-init-tools-3.12-x86_64-1.txz:  Upgraded.
-a/ntfs-3g-2010.10.2-x86_64-1.txz:  Upgraded.
-a/tar-1.25-x86_64-1.tgz:  Upgraded.
-a/udev-164-x86_64-1.txz:  Upgraded.
-a/usbutils-0.90-x86_64-1.txz:  Upgraded.
-a/util-linux-ng-2.18-x86_64-1.txz:  Upgraded.
-a/xfsprogs-3.1.3-x86_64-1.txz:  Upgraded.
-a/xz-5.0.0-x86_64-1.tgz:  Upgraded.
-ap/cdrtools-3.00-x86_64-1.txz:  Upgraded.
-ap/linuxdoc-tools-0.9.66-x86_64-5.txz:  Rebuilt.
-  Upgraded to gnome-doc-utils-0.20.2 and asciidoc-8.6.2.
-  Thanks to Stuart Winter.
-  Patched a problem with gtk-doc and vim.
-  Thanks to Trev Carey-Smith and Robby Workman.
-  Patched asciidoc to fix a problem processing the git docs.
-ap/man-pages-3.30-noarch-1.txz:  Upgraded.
-ap/mc-4.7.0.10-x86_64-1.txz:  Upgraded.
-ap/pm-utils-1.4.1-x86_64-1.txz:  Upgraded.
-d/autoconf-2.68-noarch-1.txz:  Upgraded.
-d/bison-2.4.3-x86_64-1.txz:  Upgraded.
-d/doxygen-1.7.2-x86_64-1.txz:  Upgraded.
-d/gettext-tools-0.18.1.1-x86_64-1.txz:  Upgraded.
-d/git-1.7.3.2-x86_64-1.txz:  Upgraded.
-d/libtool-2.4-x86_64-1.txz:  Upgraded.
-d/m4-1.4.15-x86_64-1.txz:  Upgraded.
-d/slacktrack-2.08-x86_64-1.txz:  Upgraded.
-  Moved here from /extra.  Thanks to Stuart Winter.
-d/subversion-1.6.13-x86_64-1.txz:  Upgraded.
-l/atk-1.32.0-x86_64-1.txz:  Upgraded.
-l/babl-0.1.2-x86_64-1.txz:  Upgraded.
-l/cairo-1.10.0-x86_64-1.txz:  Upgraded.
-l/dbus-glib-0.88-x86_64-1.txz:  Upgraded.
-l/freetype-2.4.3-x86_64-1.txz:  Upgraded.
-l/gdk-pixbuf2-2.22.1-x86_64-1.txz:  Added.
-l/gegl-0.1.2-x86_64-1.txz:  Upgraded.
-l/glib2-2.26.0-x86_64-1.txz:  Upgraded.
-l/gnome-icon-theme-2.31.0-x86_64-1.txz:  Upgraded.
-l/gst-plugins-base-0.10.30.2-x86_64-1.txz:  Upgraded.
-l/gst-plugins-good-0.10.25-x86_64-1.txz:  Upgraded.
-l/gstreamer-0.10.30.2-x86_64-1.txz:  Upgraded.
-l/gtk+2-2.22.0-x86_64-1.txz:  Upgraded.
-l/librsvg-2.32.0-x86_64-1.txz:  Upgraded.
-l/libusb-1.0.8-x86_64-1.txz:  Upgraded.
-l/libwnck-2.30.5-x86_64-1.txz:  Upgraded.
-l/pango-1.28.3-x86_64-1.txz:  Upgraded.
-l/parted-2.3-x86_64-1.txz:  Upgraded.
-l/poppler-0.14.5-x86_64-1.txz:  Upgraded.
-l/poppler-data-0.4.4-noarch-1.txz:  Upgraded.
-l/pycairo-1.8.10-x86_64-1.txz:  Upgraded.
-l/pygobject-2.26.0-x86_64-1.txz:  Upgraded.
-  Thanks to alienBOB for the crash fix patch.
-l/pygtk-2.22.0-x86_64-1.txz:  Upgraded.
-l/v4l-utils-0.8.1-x86_64-1.txz:  Upgraded.
-l/vte-0.26.1-x86_64-1.txz:  Upgraded.
-n/bluez-4.78-x86_64-1.txz:  Upgraded.
-n/dhcp-4.2.0_P1-x86_64-1.txz:  Upgraded.
-n/iproute2-2.6.35-x86_64-1.txz:  Upgraded.
-n/iptables-1.4.10-x86_64-1.txz:  Upgraded.
-n/obex-data-server-0.4.5-x86_64-2.txz:  Rebuilt.
-n/openssh-5.6p1-x86_64-1.txz:  Upgraded.
-n/samba-3.5.6-x86_64-1.txz:  Upgraded.
-n/vsftpd-2.3.2-x86_64-1.txz:  Upgraded.
-tcl/tcl-8.5.9-x86_64-1.txz:  Upgraded.
-tcl/tk-8.5.9-x86_64-1.txz:  Upgraded.
-x/appres-1.0.3-x86_64-1.txz:  Upgraded.
-x/bdftopcf-1.0.3-x86_64-1.txz:  Upgraded.
-x/beforelight-1.0.4-x86_64-1.txz:  Upgraded.
-x/bigreqsproto-1.1.1-noarch-1.txz:  Upgraded.
-x/bitmap-1.0.5-x86_64-1.txz:  Upgraded.
-x/compositeproto-0.4.2-noarch-1.txz:  Upgraded.
-x/damageproto-1.2.1-noarch-1.txz:  Upgraded.
-x/editres-1.0.5-x86_64-1.txz:  Upgraded.
-x/encodings-1.0.4-noarch-1.txz:  Upgraded.
-x/fixesproto-4.1.2-noarch-1.txz:  Upgraded.
-x/font-adobe-100dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-adobe-75dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-100dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-75dpi-1.0.3-noarch-1.txz:  Upgraded.
-x/font-adobe-utopia-type1-1.0.3-noarch-1.txz:  Upgraded.
-x/font-alias-1.0.3-noarch-1.txz:  Upgraded.
-x/font-arabic-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bh-100dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bh-75dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bh-lucidatypewriter-100dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bh-lucidatypewriter-75dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bh-ttf-1.0.3-noarch-1.txz:  Upgraded.
-x/font-bh-type1-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bitstream-100dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bitstream-75dpi-1.0.2-noarch-1.txz:  Upgraded.
-x/font-bitstream-type1-1.0.2-noarch-1.txz:  Upgraded.
-x/font-cronyx-cyrillic-1.0.2-noarch-1.txz:  Upgraded.
-x/font-cursor-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-daewoo-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-dec-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-ibm-type1-1.0.2-noarch-1.txz:  Upgraded.
-x/font-isas-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-jis-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-micro-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-misc-cyrillic-1.0.2-noarch-1.txz:  Upgraded.
-x/font-misc-ethiopic-1.0.2-noarch-1.txz:  Upgraded.
-x/font-misc-meltho-1.0.2-noarch-1.txz:  Upgraded.
-x/font-misc-misc-1.1.1-noarch-1.txz:  Upgraded.
-x/font-mutt-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-schumacher-misc-1.1.1-noarch-1.txz:  Upgraded.
-x/font-screen-cyrillic-1.0.3-noarch-1.txz:  Upgraded.
-x/font-sony-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-sun-misc-1.0.2-noarch-1.txz:  Upgraded.
-x/font-util-1.2.0-x86_64-1.txz:  Upgraded.
-x/font-winitzki-cyrillic-1.0.2-noarch-1.txz:  Upgraded.
-x/font-xfree86-type1-1.0.3-noarch-1.txz:  Upgraded.
-x/fontsproto-2.1.1-noarch-1.txz:  Upgraded.
-x/fslsfonts-1.0.3-x86_64-1.txz:  Upgraded.
-x/fstobdf-1.0.4-x86_64-1.txz:  Upgraded.
-x/glew-1.5.7-x86_64-1.txz:  Upgraded.
-x/glproto-1.4.12-noarch-1.txz:  Upgraded.
-x/iceauth-1.0.4-x86_64-1.txz:  Upgraded.
-x/ico-1.0.3-x86_64-1.txz:  Upgraded.
-x/imake-1.0.4-x86_64-1.txz:  Upgraded.
-x/inputproto-2.0.1-noarch-1.txz:  Upgraded.
-x/kbproto-1.0.5-noarch-1.txz:  Upgraded.
-x/libFS-1.0.3-x86_64-1.txz:  Upgraded.
-x/libICE-1.0.7-x86_64-1.txz:  Upgraded.
-x/libSM-1.2.0-x86_64-1.txz:  Upgraded.
-x/libX11-1.3.6-x86_64-1.txz:  Upgraded.
-x/libXScrnSaver-1.2.1-x86_64-1.txz:  Upgraded.
-x/libXTrap-1.0.0-x86_64-2.txz:  Removed.
-x/libXau-1.0.6-x86_64-1.txz:  Upgraded.
-x/libXaw-1.0.8-x86_64-1.txz:  Upgraded.
-x/libXcomposite-0.4.3-x86_64-1.txz:  Upgraded.
-x/libXcursor-1.1.11-x86_64-1.txz:  Upgraded.
-x/libXdamage-1.1.3-x86_64-1.txz:  Upgraded.
-x/libXdmcp-1.1.0-x86_64-1.txz:  Upgraded.
-x/libXevie-1.0.3-x86_64-1.txz:  Upgraded.
-x/libXext-1.2.0-x86_64-1.txz:  Upgraded.
-x/libXfixes-4.0.5-x86_64-1.txz:  Upgraded.
-x/libXfont-1.4.3-x86_64-1.txz:  Upgraded.
-x/libXft-2.2.0-x86_64-1.txz:  Upgraded.
-x/libXi-1.4.0-x86_64-1.txz:  Upgraded.
-x/libXinerama-1.1.1-x86_64-1.txz:  Upgraded.
-x/libXmu-1.1.0-x86_64-1.txz:  Upgraded.
-x/libXpm-3.5.9-x86_64-1.txz:  Upgraded.
-x/libXprintAppUtil-1.0.1-x86_64-2.txz:  Removed.
-x/libXprintUtil-1.0.1-x86_64-2.txz:  Removed.
-x/libXrandr-1.3.1-x86_64-1.txz:  Upgraded.
-x/libXrender-0.9.6-x86_64-1.txz:  Upgraded.
-x/libXres-1.0.5-x86_64-1.txz:  Upgraded.
-x/libXt-1.0.9-x86_64-1.txz:  Upgraded.
-x/libXtst-1.2.0-x86_64-1.txz:  Upgraded.
-x/libXv-1.0.6-x86_64-1.txz:  Upgraded.
-x/libXvMC-1.0.6-x86_64-1.txz:  Upgraded.
-x/libXxf86dga-1.1.2-x86_64-1.txz:  Upgraded.
-x/libXxf86vm-1.1.1-x86_64-1.txz:  Upgraded.
-x/libdmx-1.1.1-x86_64-1.txz:  Upgraded.
-x/libdrm-2.4.22-x86_64-1.txz:  Upgraded.
-x/liberation-fonts-ttf-1.06.0.20100721-noarch-1.txz:  Upgraded.
-x/libfontenc-1.1.0-x86_64-1.txz:  Upgraded.
-x/libpciaccess-0.12.0-x86_64-1.txz:  Upgraded.
-x/libxcb-1.7-x86_64-1.txz:  Upgraded.
-x/libxkbfile-1.0.7-x86_64-1.txz:  Upgraded.
-x/libxkbui-1.0.2-x86_64-2.txz:  Removed.
-x/lndir-1.0.2-x86_64-1.txz:  Upgraded.
-x/luit-1.1.0-x86_64-1.txz:  Upgraded.
-x/makedepend-1.0.3-x86_64-1.txz:  Upgraded.
-x/mesa-7.9-x86_64-1.txz:  Upgraded.
-  I was on the fence with this upgrade, and in fact it sat in /testing for
-  days with mesa-7.8.2 queued instead.  But it seems the Intel driver really
-  does need this version of Mesa or there are major problems with compositing
-  (most of them leading to an X server crash).
-  If X crashes at start, try disabling compositing.  Create a file named
-  /etc/X11/xorg.conf.d/disable-composite.conf with this in it:
-    Section "Extensions"
-      Option "Composite" "Disable"
-    EndSection
-  The machine that had issues here was using an onboard nVidia 6150SE.
-  Using the nv, nouveau, or even the vesa driver, X crashed at start unless
-  compositing was disabled.  However, everything works perfectly when using
-  the binary nVidia drivers, and odds are that most users with decent nVidia
-  hardware are doing just that.  So, that's the situation with nVidia and
-  Mesa as observed here for now.  Hopefully the defaults will work better
-  soon, but meanwhile if you have nVidia hardware you may have to either
-  disable compositing or obtain and use nVidia's binary drivers.
-x/mkfontdir-1.0.6-noarch-1.txz:  Upgraded.
-x/mkfontscale-1.0.8-x86_64-1.txz:  Upgraded.
-x/oclock-1.0.2-x86_64-1.txz:  Upgraded.
-x/pixman-0.20.0-x86_64-1.txz:  Upgraded.
-x/radeon_ucode-20100902-noarch-1.txz:  Added.
-x/randrproto-1.3.2-noarch-1.txz:  Upgraded.
-x/recordproto-1.14.1-noarch-1.txz:  Upgraded.
-x/renderproto-0.11.1-noarch-1.txz:  Upgraded.
-x/rgb-1.0.4-x86_64-1.txz:  Upgraded.
-x/rstart-1.0.3-x86_64-1.txz:  Removed.
-x/scrnsaverproto-1.2.1-noarch-1.txz:  Upgraded.
-x/sessreg-1.0.6-x86_64-1.txz:  Upgraded.
-x/setxkbmap-1.2.0-x86_64-1.txz:  Upgraded.
-x/showfont-1.0.3-x86_64-1.txz:  Upgraded.
-x/smproxy-1.0.4-x86_64-1.txz:  Upgraded.
-x/tibmachuni-font-ttf-1.901b-noarch-1.txz:  Upgraded.
-x/trapproto-3.4.3-noarch-2.txz:  Removed.
-x/twm-1.0.5-x86_64-1.txz:  Upgraded.
-x/util-macros-1.11.0-noarch-1.txz:  Upgraded.
-x/videoproto-2.3.1-noarch-1.txz:  Upgraded.
-x/viewres-1.0.3-x86_64-1.txz:  Upgraded.
-x/x11perf-1.5.2-x86_64-1.txz:  Upgraded.
-x/xauth-1.0.5-x86_64-1.txz:  Upgraded.
-x/xclipboard-1.1.1-x86_64-1.txz:  Upgraded.
-x/xclock-1.0.5-x86_64-1.txz:  Upgraded.
-x/xcmiscproto-1.2.1-noarch-1.txz:  Upgraded.
-x/xcmsdb-1.0.3-x86_64-1.txz:  Upgraded.
-x/xconsole-1.0.4-x86_64-1.txz:  Upgraded.
-x/xcursor-themes-1.0.3-noarch-1.txz:  Upgraded.
-x/xcursorgen-1.0.4-x86_64-1.txz:  Upgraded.
-x/xdbedizzy-1.1.0-x86_64-1.txz:  Upgraded.
-x/xdg-utils-20101104cvs-noarch-1.txz:  Upgraded.
-x/xditview-1.0.2-x86_64-1.txz:  Upgraded.
-x/xdpyinfo-1.2.0-x86_64-1.txz:  Upgraded.
-x/xdriinfo-1.0.4-x86_64-1.txz:  Upgraded.
-x/xedit-1.2.0-x86_64-1.txz:  Upgraded.
-x/xev-1.1.0-x86_64-1.txz:  Upgraded.
-x/xextproto-7.1.2-noarch-1.txz:  Upgraded.
-x/xf86-input-acecad-1.4.0-x86_64-2.txz:  Rebuilt.
-x/xf86-input-aiptek-1.3.1-x86_64-1.txz:  Upgraded.
-x/xf86-input-evdev-2.5.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-joystick-1.5.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-keyboard-1.5.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-mouse-1.6.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-penmount-1.4.1-x86_64-2.txz:  Rebuilt.
-x/xf86-input-synaptics-1.3.0-x86_64-1.txz:  Upgraded.
-x/xf86-input-vmmouse-12.6.10-x86_64-1.txz:  Upgraded.
-x/xf86-input-void-1.3.1-x86_64-1.txz:  Upgraded.
-x/xf86-input-wacom-0.10.8-x86_64-1.txz:  Upgraded.
-x/xf86-video-apm-1.2.3-x86_64-1.txz:  Upgraded.
-x/xf86-video-ark-0.7.3-x86_64-1.txz:  Upgraded.
-x/xf86-video-ast-0.91.10-x86_64-1.txz:  Upgraded.
-x/xf86-video-ati-6.13.2-x86_64-1.txz:  Upgraded.
-x/xf86-video-chips-1.2.3-x86_64-1.txz:  Upgraded.
-x/xf86-video-cirrus-1.3.2-x86_64-3.txz:  Rebuilt.
-x/xf86-video-dummy-0.3.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-glint-1.2.5-x86_64-1.txz:  Upgraded.
-x/xf86-video-i128-1.3.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-i740-1.3.2-x86_64-3.txz:  Rebuilt.
-x/xf86-video-intel-2.13.0-x86_64-1.txz:  Upgraded.
-x/xf86-video-mach64-6.8.2-x86_64-3.txz:  Rebuilt.
-x/xf86-video-mga-1.4.13-x86_64-1.txz:  Upgraded.
-x/xf86-video-neomagic-1.2.5-x86_64-1.txz:  Upgraded.
-x/xf86-video-nv-2.1.18-x86_64-1.txz:  Upgraded.
-x/xf86-video-openchrome-0.2.904-x86_64-2.txz:  
-x/xf86-video-r128-6.8.1-x86_64-3.txz:  Rebuilt.
-x/xf86-video-rendition-4.2.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-s3-0.6.3-x86_64-3.txz:  Rebuilt.
-x/xf86-video-s3virge-1.10.4-x86_64-3.txz:  Rebuilt.
-x/xf86-video-savage-2.3.1-x86_64-3.txz:  Rebuilt.
-x/xf86-video-siliconmotion-1.7.4-x86_64-2.txz:  
-x/xf86-video-sis-0.10.3-x86_64-1.txz:  Upgraded.
-x/xf86-video-sisusb-0.9.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-tdfx-1.4.3-x86_64-3.txz:  Rebuilt.
-x/xf86-video-tga-1.2.1-x86_64-2.txz:  Rebuilt.
-x/xf86-video-trident-1.3.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-tseng-1.2.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-v4l-0.2.0-x86_64-4.txz:  Rebuilt.
-x/xf86-video-vesa-2.3.0-x86_64-3.txz:  Rebuilt.
-x/xf86-video-vmware-11.0.3-x86_64-1.txz:  Upgraded.
-x/xf86-video-voodoo-1.2.4-x86_64-1.txz:  Upgraded.
-x/xf86-video-xgi-1.6.0-x86_64-1.txz:  Upgraded.
-x/xf86dga-1.0.3-x86_64-1.txz:  Upgraded.
-x/xf86rushproto-1.1.2-noarch-2.txz:  Removed.
-x/xfd-1.1.0-x86_64-1.txz:  Upgraded.
-x/xfindproxy-1.0.1-x86_64-2.txz:  Removed.
-x/xfontsel-1.0.3-x86_64-1.txz:  Upgraded.
-x/xfs-1.1.1-x86_64-1.txz:  Upgraded.
-x/xfsinfo-1.0.3-x86_64-1.txz:  Upgraded.
-x/xfwp-1.0.1-x86_64-2.txz:  Removed.
-x/xgamma-1.0.4-x86_64-1.txz:  Upgraded.
-x/xgc-1.0.3-x86_64-1.txz:  Upgraded.
-x/xhost-1.0.4-x86_64-1.txz:  Upgraded.
-x/xinit-1.3.0-x86_64-1.txz:  Upgraded.
-x/xinput-1.5.3-x86_64-1.txz:  Upgraded.
-x/xkbcomp-1.2.0-x86_64-1.txz:  Upgraded.
-x/xkbevd-1.1.1-x86_64-1.txz:  Upgraded.
-x/xkbutils-1.0.3-x86_64-1.txz:  Upgraded.
-x/xkill-1.0.3-x86_64-1.txz:  Upgraded.
-x/xload-1.1.0-x86_64-1.txz:  Upgraded.
-x/xlogo-1.0.3-x86_64-1.txz:  Upgraded.
-x/xlsatoms-1.1.0-x86_64-1.txz:  Upgraded.
-x/xlsclients-1.1.1-x86_64-1.txz:  Upgraded.
-x/xlsfonts-1.0.3-x86_64-1.txz:  Upgraded.
-x/xmag-1.0.4-x86_64-1.txz:  Upgraded.
-x/xman-1.1.1-x86_64-1.txz:  Upgraded.
-x/xmh-1.0.2-x86_64-1.txz:  Upgraded.
-x/xmodmap-1.0.5-x86_64-1.txz:  Upgraded.
-x/xmore-1.0.2-x86_64-1.txz:  Upgraded.
-x/xorg-server-1.9.2-x86_64-1.txz:  Upgraded.
-x/xorg-server-xephyr-1.9.2-x86_64-1.txz:  Upgraded.
-x/xorg-server-xnest-1.9.2-x86_64-1.txz:  Upgraded.
-x/xorg-server-xvfb-1.9.2-x86_64-1.txz:  Upgraded.
-x/xorg-sgml-doctools-1.5-noarch-1.txz:  Upgraded.
-x/xplsprinters-1.0.1-x86_64-2.txz:  Removed.
-x/xprehashprinterlist-1.0.1-x86_64-2.txz:  Removed.
-x/xprop-1.2.0-x86_64-1.txz:  Upgraded.
-x/xproto-7.0.19-noarch-1.txz:  Upgraded.
-x/xproxymanagementprotocol-1.0.3-noarch-1.txz:  Removed.
-x/xrandr-1.3.4-x86_64-1.txz:  Upgraded.
-x/xrdb-1.0.7-x86_64-1.txz:  Upgraded.
-x/xrefresh-1.0.4-x86_64-1.txz:  Upgraded.
-x/xscope-1.3-x86_64-1.txz:  Upgraded.
-x/xset-1.2.1-x86_64-1.txz:  Upgraded.
-x/xsetmode-1.0.0-x86_64-2.txz:  Removed.
-x/xsetpointer-1.0.1-x86_64-2.txz:  Removed.
-x/xsetroot-1.1.0-x86_64-1.txz:  Upgraded.
-x/xsm-1.0.2-x86_64-1.txz:  Upgraded.
-x/xstdcmap-1.0.2-x86_64-1.txz:  Upgraded.
-x/xterm-266-x86_64-1.txz:  Upgraded.
-x/xtrans-1.2.6-noarch-1.txz:  Upgraded.
-x/xtrap-1.0.2-x86_64-2.txz:  Removed.
-x/xvinfo-1.1.1-x86_64-1.txz:  Upgraded.
-x/xwd-1.0.4-x86_64-1.txz:  Upgraded.
-x/xwininfo-1.1.1-x86_64-1.txz:  Upgraded.
-x/xwud-1.0.3-x86_64-1.txz:  Upgraded.
-xap/gimp-2.6.11-x86_64-1.txz:  Upgraded.
-xap/imagemagick-6.6.5_6-x86_64-1.txz:  Upgraded.
-xap/mozilla-thunderbird-3.1.6-x86_64-1.txz:  Upgraded.
-  This upgrade fixes some more security bugs.
+xap/mozilla-firefox-10.0.2-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/thunderbird31.html
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-xap/xchat-2.8.8-x86_64-1.txz:  Upgraded.
-xap/xine-lib-1.1.19-x86_64-1.txz:  Upgraded.
-extra/xf86-video-nouveau/xf86-video-nouveau-git_065576d5df0d-x86_64-1.txz:  Added.
-testing/packages/mozilla-firefox-4.0b7-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Mon Nov  1 23:21:39 UTC 2010
-n/proftpd-1.3.3c-x86_64-1.txz:  Upgraded.
-  Fixed Telnet IAC stack overflow vulnerability (ZDI-CAN-925), which can
-  allow remote execution of arbitrary code as the user running the
-  ProFTPD daemon.  Thanks to TippingPoint and the Zero Day Initiative (ZDI).
+xap/mozilla-thunderbird-10.0.2-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3867
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
   (* Security fix *)
-xap/pidgin-2.7.5-x86_64-1.txz:  Upgraded.
-  This update addresses some denial of service bugs.
+xap/seamonkey-2.7.2-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3711
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
   (* Security fix *)
 +--------------------------+
-Sun Oct 31 20:25:05 UTC 2010
-d/oprofile-0.9.6-x86_64-3.txz:  Rebuilt.
-l/seamonkey-solibs-2.0.10-x86_64-1.txz:  Upgraded.
-xap/seamonkey-2.0.10-x86_64-1.txz:  Upgraded.
-  This release fixes some more security vulnerabilities.
+Tue Feb 14 01:57:25 UTC 2012
+xap/mozilla-thunderbird-10.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
   (* Security fix *)
 +--------------------------+
-Thu Oct 28 22:13:53 UTC 2010
-a/glibc-solibs-2.12.1-x86_64-3.txz:  Rebuilt.
-  Patched "The GNU C library dynamic linker will dlopen arbitrary DSOs
-  during setuid loads."  This security issue allows a local attacker to
-  gain root by specifying an unsafe DSO in the library search path to be
-  used with a setuid binary in LD_AUDIT mode.
-  Bug found by Tavis Ormandy (with thanks to Ben Hawkes and Julien Tinnes).
+Sun Feb 12 23:26:00 UTC 2012
+testing/packages/mozilla-thunderbird-11.0b1-x86_64-1.txz:  Added.
+testing/packages/seamonkey-2.8b2-x86_64-1.txz:  Added.
+testing/packages/seamonkey-solibs-2.8b2-x86_64-1.txz:  Added.
++--------------------------+
+Sat Feb 11 02:37:16 UTC 2012
+l/seamonkey-solibs-2.7.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3856
-    http://seclists.org/fulldisclosure/2010/Oct/344
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
   (* Security fix *)
-a/glibc-zoneinfo-2.12.1-noarch-3.txz:  Rebuilt.
-  Upgraded to tzcode2010n and tzdata2010n.
-a/grep-2.7-x86_64-1.txz:  Upgraded.
-ap/alsa-utils-1.0.23-x86_64-3.txz:  Rebuilt.
-  Don't try to load ALSA OSS modules if they aren't available.
-  Thanks to John Fitzgerald for the patch.
-l/glibc-2.12.1-x86_64-3.txz:  Rebuilt.
+xap/mozilla-firefox-10.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3856
-    http://seclists.org/fulldisclosure/2010/Oct/344
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-l/glibc-i18n-2.12.1-x86_64-3.txz:  Rebuilt.
-l/glibc-profile-2.12.1-x86_64-3.txz:  Rebuilt.
-xap/mozilla-firefox-3.6.12-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
+xap/seamonkey-2.7.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
+testing/packages/mozilla-firefox-11.0b2-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Feb  8 01:21:42 UTC 2012
+a/cups-1.4.8-x86_64-1.txz:  Upgraded.
+a/glibc-solibs-2.14.1-x86_64-4.txz:  Rebuilt.
+  Patched an overflow in tzfile.  This was evidently first reported in
+  2009, but is only now getting around to being patched.  To exploit it,
+  one must be able to write beneath /usr/share/zoneinfo, which is usually
+  not possible for a normal user, but may be in the case where they are
+  chroot()ed to a directory that they own.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-5029
+  (* Security fix *)
+a/glibc-zoneinfo-2011i_2011n-noarch-4.txz:  Rebuilt.
+ap/alsa-utils-1.0.25-x86_64-1.txz:  Upgraded.
+ap/hplip-3.11.12-x86_64-1.txz:  Upgraded.
+ap/sqlite-3.7.10-x86_64-1.txz:  Upgraded.
+l/alsa-oss-1.0.25-x86_64-1.txz:  Upgraded.
+l/alsa-lib-1.0.25-x86_64-1.txz:  Upgraded.
+l/apr-util-1.4.1-x86_64-1.txz:  Upgraded.
+l/glibc-2.14.1-x86_64-4.txz:  Rebuilt.
+  Patched an overflow in tzfile.  This was evidently first reported in
+  2009, but is only now getting around to being patched.  To exploit it,
+  one must be able to write beneath /usr/share/zoneinfo, which is usually
+  not possible for a normal user, but may be in the case where they are
+  chroot()ed to a directory that they own.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-5029
+  (* Security fix *)
+l/glibc-i18n-2.14.1-x86_64-4.txz:  Rebuilt.
+l/glibc-profile-2.14.1-x86_64-4.txz:  Rebuilt.
+  Patched an overflow in tzfile.  This was evidently first reported in
+  2009, but is only now getting around to being patched.  To exploit it,
+  one must be able to write beneath /usr/share/zoneinfo, which is usually
+  not possible for a normal user, but may be in the case where they are
+  chroot()ed to a directory that they own.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-5029
+  (* Security fix *)
+n/httpd-2.2.22-x86_64-1.txz:  Upgraded.
+  *) SECURITY: CVE-2011-3368 (cve.mitre.org)
+     Reject requests where the request-URI does not match the HTTP
+     specification, preventing unexpected expansion of target URLs in
+     some reverse proxy configurations.  [Joe Orton]
+  *) SECURITY: CVE-2011-3607 (cve.mitre.org)
+     Fix integer overflow in ap_pregsub() which, when the mod_setenvif module
+     is enabled, could allow local users to gain privileges via a .htaccess
+     file. [Stefan Fritsch, Greg Ames]
+  *) SECURITY: CVE-2011-4317 (cve.mitre.org)
+     Resolve additional cases of URL rewriting with ProxyPassMatch or
+     RewriteRule, where particular request-URIs could result in undesired
+     backend network exposure in some configurations.
+     [Joe Orton]
+  *) SECURITY: CVE-2012-0021 (cve.mitre.org)
+     mod_log_config: Fix segfault (crash) when the '%{cookiename}C' log format
+     string is in use and a client sends a nameless, valueless cookie, causing
+     a denial of service. The issue existed since version 2.2.17. PR 52256.
+     [Rainer Canavan <rainer-apache 7val com>]
+  *) SECURITY: CVE-2012-0031 (cve.mitre.org)
+     Fix scoreboard issue which could allow an unprivileged child process
+     could cause the parent to crash at shutdown rather than terminate
+     cleanly.  [Joe Orton]
+  *) SECURITY: CVE-2012-0053 (cve.mitre.org)
+     Fix an issue in error responses that could expose "httpOnly" cookies
+     when no custom ErrorDocument is specified for status code 400.
+     [Eric Covener]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3368
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3607
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4317
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0021
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0031
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0053
+  (* Security fix *)
+n/php-5.3.10-x86_64-1.txz:  Upgraded.
+  Fixed arbitrary remote code execution vulnerability reported by Stefan
+  Esser, CVE-2012-0830. (Stas, Dmitry)
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0830
   (* Security fix *)
-+--------------------------+
-Tue Oct 26 17:02:19 UTC 2010
-l/boost-1.42.0-x86_64-2.txz:  Rebuilt.
-  Patched to work with gcc-4.5.1.
-l/seamonkey-solibs-2.0.9-x86_64-1.txz
-n/mutt-1.5.21-x86_64-1.txz:  Upgraded.
-  Thanks to Audrius Kazukauskas for the gpgme patch.
-xap/seamonkey-2.0.9-x86_64-1.txz
-  This release fixes some more security vulnerabilities.
+n/proftpd-1.3.4a-x86_64-1.txz:  Upgraded.
+  This update fixes a use-after-free() memory corruption error,
+  and possibly other unspecified issues.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4130
+  (* Security fix *)
+n/vsftpd-2.3.5-x86_64-1.txz:  Upgraded.
+  Minor version bump, this also works around a hard to trigger heap overflow
+  in glibc (glibc zoneinfo caching vuln).  For there to be any possibility
+  to trigger the glibc bug within vsftpd, the non-default option
+  "chroot_local_user" must be set in /etc/vsftpd.conf.
+  Considered 1) low severity (hard to exploit) and 2) not a vsftpd bug :-)
+    Nevertheless:
+  (* Security fix *)
++--------------------------+
+Thu Feb  2 16:02:47 UTC 2012
+It is cloudy and foggy here today -- I did not see my shadow, and
+will not be crawling back into my hole for 6 weeks.  ;-)
+testing/packages/mozilla-firefox-11.0b1-x86_64-1.txz:  Added.
++--------------------------+
+Thu Feb  2 15:07:23 UTC 2012
+a/kernel-firmware-20120202git-noarch-1.txz:  Upgraded.
+  There were some reports of a failing checksum on the .asc (which
+  did verify, so the package was good).  So, we'll replace it with
+  a new build to make sure that it syncs out.
++--------------------------+
+Wed Feb  1 23:20:04 UTC 2012
+$(fortune) just obtained logging in to stamp the Changelog, finally:
+  "You single-handedly fought your way into this hopeless mess."
+Well, we'll work on rectifying that situation.  :-)  Sorry about the
+lack of updates...  everything here blew up all at once, it seemed, but
+equipment, upstream targets, and reality all seem to be settling down
+enough to get these updates out and have them be an actual improvement
+over what's already up.  Hope to have more soon.  Cheers!
+l/seamonkey-solibs-2.7-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
   (* Security fix *)
-+--------------------------+
-Wed Oct 20 23:14:23 UTC 2010
-a/glibc-solibs-2.12.1-x86_64-2.txz:  Rebuilt.
-  Patched "dynamic linker expands $ORIGIN in setuid library search path".
-  This security issue allows a local attacker to gain root if they can create
-  a hard link to a setuid root binary.  Thanks to Tavis Ormandy.
+xap/mozilla-firefox-10.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3847
-    http://seclists.org/fulldisclosure/2010/Oct/257
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-a/glibc-zoneinfo-2.12.1-noarch-2.txz:  Rebuilt.
-a/sysklogd-1.5-x86_64-1.txz:  Upgraded.
-l/glibc-2.12.1-x86_64-2.txz:  Rebuilt.
-l/glibc-i18n-2.12.1-x86_64-2.txz:  Rebuilt.
-l/glibc-profile-2.12.1-x86_64-2.txz:  Rebuilt.
-xap/mozilla-firefox-3.6.11-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
+xap/mozilla-thunderbird-10.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
   (* Security fix *)
-xap/mozilla-thunderbird-3.1.5-x86_64-1.txz:  Upgraded.
-  This upgrade fixes some more security bugs.
+xap/seamonkey-2.7-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/thunderbird31.html
+    http://www.mozilla.org/security/known-vulnerabilities/seamonkey.html
+  (* Security fix *)
++--------------------------+
+Wed Feb  1 16:08:12 CST 2012
+testing/packages/mozilla-firefox-10.0-x86_64-1.txz:  Upgraded.
+testing/packages/mozilla-thunderbird-10.0-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Feb  1 16:08:11 CST 2012
+a/kernel-generic-3.2.2-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.2-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.2-x86_64-1.txz:  Upgraded.
+a/openssl-solibs-0.9.8t-x86_64-1.txz:  Upgraded.
+  This fixes a bug where DTLS applications were not properly supported.  This
+  bug could have allowed remote attackers to cause a denial of service via
+  unspecified vectors.
+  CVE-2012-0050 has been assigned to this issue.
+  For more details see:
+    http://openssl.org/news/secadv_20120118.txt
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0050
+  (* Security fix *)
+d/kernel-headers-3.2.2-x86-1.txz:  Upgraded.
+e/emacs-23.4-x86_64-1.txz:  Upgraded.
+k/kernel-source-3.2.2-noarch-1.txz:  Upgraded.
+n/openssl-0.9.8t-x86_64-1.txz:  Upgraded.
+  This fixes a bug where DTLS applications were not properly supported.  This
+  bug could have allowed remote attackers to cause a denial of service via
+  unspecified vectors.
+  CVE-2012-0050 has been assigned to this issue.
+  For more details see:
+    http://openssl.org/news/secadv_20120118.txt
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0050
+  (* Security fix *)
+isolinux/initrd.img:  Rebuilt.
+kernels/*:  Upgraded.
+testing/packages/mozilla-firefox-10.0b6-x86_64-1.txz:  Upgraded.
+usb-and-pxe-installers/usbboot.img:  Rebuilt.
++--------------------------+
+Wed Feb  1 16:08:10 CST 2012
+a/coreutils-8.15-x86_64-1.txz:  Upgraded.
+  This will be provided as a patch to fix some important issues with ext4.
+  Thanks to Georgy Salnikov for the notification.
+a/glibc-solibs-2.14.1-x86_64-3.txz:  Rebuilt.
+a/glibc-zoneinfo-2011i_2011n-noarch-3.txz:  Rebuilt.
+a/kernel-generic-3.2.1-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.2.1-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.2.1-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.2.1-x86-1.txz:  Upgraded.
+k/kernel-source-3.2.1-noarch-1.txz:  Upgraded.
+l/glibc-2.14.1-x86_64-3.txz:  Rebuilt.
+l/glibc-i18n-2.14.1-x86_64-3.txz:  Rebuilt.
+l/glibc-profile-2.14.1-x86_64-3.txz:  Rebuilt.
+n/ca-certificates-20111211-noarch-1.txz:  Upgraded.
+  Removes DigiNotar and other untrusted certificates.
   (* Security fix *)
+isolinux/initrd.img:  Rebuilt.
+kernels/*:  Upgraded.
+testing/packages/mozilla-firefox-10.0b4-x86_64-1.txz:  Added.
+testing/packages/mozilla-thunderbird-10.0b4-x86_64-1.txz:  Added.
+usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Mon Oct 18 20:34:23 UTC 2010
-a/aaa_elflibs-13.2-x86_64-1.txz:  Upgraded.
-  Added libelf.so.0.8.13.
-d/gcc-4.5.1-x86_64-2.txz:  Rebuilt.
-  Added support for LTO (Link Time Optimization).
-d/gcc-g++-4.5.1-x86_64-2.txz:  Rebuilt.
-d/gcc-gfortran-4.5.1-x86_64-2.txz:  Rebuilt.
-d/gcc-gnat-4.5.1-x86_64-2.txz:  Rebuilt.
-d/gcc-java-4.5.1-x86_64-2.txz:  Rebuilt.
-d/gcc-objc-4.5.1-x86_64-2.txz:  Rebuilt.
-l/libelf-0.8.13-x86_64-1.txz:  Added.
-  This is needed to enable LTO support in GCC.
-+--------------------------+
-Sat Oct 16 20:03:16 UTC 2010
-xap/xaos-3.5-x86_64-1.txz:  Added.
-  Added as a tribute to the late Dr. Benoit Mandelbrot.
-+--------------------------+
-Wed Oct 13 20:30:44 UTC 2010
-a/glibc-solibs-2.12.1-x86_64-1.txz:  Upgraded.
-a/glibc-zoneinfo-2.12.1-noarch-1.txz:  Upgraded.
-  Upgraded to tzcode2010m and tzdata2010m.
-a/hdparm-9.33-x86_64-1.txz:  Upgraded.
-a/kernel-firmware-2.6.35.7-noarch-1.txz:  Upgraded.
-a/kernel-generic-2.6.35.7-x86_64-1.txz:  Upgraded.
-a/kernel-huge-2.6.35.7-x86_64-1.txz:  Upgraded.
-a/kernel-modules-2.6.35.7-x86_64-1.txz:  Upgraded.
-d/kernel-headers-2.6.35.7-x86-1.txz:  Upgraded.
-a/mcelog-1.0pre3-x86_64-1.txz:  Added.
-d/binutils-2.20.51.0.11-x86_64-1.txz:  Upgraded.
-d/gcc-4.5.1-x86_64-1.txz:  Upgraded.
-d/gcc-g++-4.5.1-x86_64-1.txz:  Upgraded.
-d/gcc-gfortran-4.5.1-x86_64-1.txz:  Upgraded.
-d/gcc-gnat-4.5.1-x86_64-1.txz:  Upgraded.
-d/gcc-java-4.5.1-x86_64-1.txz:  Upgraded.
-  Added fastjar-0.97 (previously bundled with gcc-java).
-d/gcc-objc-4.5.1-x86_64-1.txz:  Upgraded.
-k/kernel-source-2.6.35.7-noarch-1.txz:  Upgraded.
-l/glibc-2.12.1-x86_64-1.txz:  Upgraded.
-l/glibc-i18n-2.12.1-x86_64-1.txz:  Upgraded.
-l/glibc-profile-2.12.1-x86_64-1.txz:  Upgraded.
-x/dejavu-fonts-ttf-2.32-noarch-1.txz:  Upgraded.
+Wed Feb  1 15:47:47 CST 2012
+Hey folks!  Have a few overdue updates to the toolchain.  This has all been
+built and rebuild (and upgraded) far too many times IMHO to wait around yet
+again to get 3.2.1 in place and bump some compiler deps to get ARM working...
+what was that about the echo $(fortune -m "goal of Computer Science") ?
+Anyway, please test and report problems and we'll have another round here
+shortly.
+a/glibc-solibs-2.14.1-x86_64-3.txz:  Rebuilt.
+a/glibc-zoneinfo-2011i_2011n-noarch-3.txz:  Rebuilt.
+a/kernel-firmware-20120109git-noarch-1.txz:  Upgraded.
+a/kernel-generic-3.1.8-x86_64-1.txz:  Upgraded.
+a/kernel-huge-3.1.8-x86_64-1.txz:  Upgraded.
+a/kernel-modules-3.1.8-x86_64-1.txz:  Upgraded.
+ap/htop-1.0-x86_64-1.txz:  Upgraded.
+d/gcc-4.6.2-x86_64-1.txz:  Upgraded.
+d/gcc-g++-4.6.2-x86_64-1.txz:  Upgraded.
+d/gcc-gfortran-4.6.2-x86_64-1.txz:  Upgraded.
+d/gcc-gnat-4.6.2-x86_64-1.txz:  Upgraded.
+d/gcc-go-4.6.2-x86_64-1.txz:  Added.
+d/gcc-java-4.6.2-x86_64-1.txz:  Upgraded.
+d/gcc-objc-4.6.2-x86_64-1.txz:  Upgraded.
+d/kernel-headers-3.1.8-x86-1.txz:  Upgraded.
+d/slacktrack-2.10-x86_64-1.txz:  Upgraded.
+e/emacs-23.3b-x86_64-1.txz:  Upgraded.
+k/kernel-source-3.1.8-noarch-1.txz:  Upgraded.
+l/freetype-2.4.8-x86_64-1.txz:  Upgraded.
+  Some vulnerabilities in handling CID-keyed PostScript fonts have
+  been fixed.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3439
+  (* Security fix *)
+l/glibc-2.14.1-x86_64-3.txz:  Rebuilt.
+  Patched to provide compile support for NIS and RPC again.
+l/glibc-i18n-2.14.1-x86_64-3.txz:  Rebuilt.
+l/glibc-profile-2.14.1-x86_64-3.txz:  Rebuilt.
+l/seamonkey-solibs-2.6.1-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+  (* Security fix *)
+n/sendmail-8.14.5-x86_64-1.txz:  Upgraded.
+n/sendmail-cf-8.14.5-noarch-1.txz:  Upgraded.
+xap/mozilla-firefox-9.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+xap/mozilla-thunderbird-9.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+xap/seamonkey-2.6.1-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+  (* Security fix *)
+xap/x3270-3.3.12ga7-x86_64-1.txz:  Upgraded.
+xap/xfractint-20.04p11-x86_64-1.txz:  Upgraded.
+pasture/gcc-4.5.3-x86_64-2.txz:  Moved to /pasture.
+pasture/gcc-g++-4.5.3-x86_64-2.txz:  Moved to /pasture.
+pasture/gcc-gfortran-4.5.3-x86_64-2.txz:  Moved to /pasture.
+pasture/gcc-gnat-4.5.3-x86_64-2.txz:  Moved to /pasture.
+pasture/gcc-java-4.5.3-x86_64-2.txz:  Moved to /pasture.
+pasture/gcc-objc-4.5.3-x86_64-2.txz:  Moved to /pasture.
 isolinux/initrd.img:  Rebuilt.
 kernels/*:  Upgraded.
-pasture/make-3.81-x86_64-3.txz:  Added.
-  This version of GNU make is still needed to build many things.
-  Added the --libdir patch for proper library searching on x86_64.
 usb-and-pxe-installers/usbboot.img:  Rebuilt.
 +--------------------------+
-Wed Sep 22 19:17:42 UTC 2010
-testing/packages/mozilla-firefox-4.0b6-x86_64-2.txz:  Rebuilt.
-  Removed firefox 3.6.10 files.
+Wed Dec 14 16:22:29 UTC 2011
+d/subversion-1.7.2-x86_64-1.txz:  Upgraded.
+  This update fixes an issue with "git svn clone" being broken.
+  Thanks to Francesco Allertsen for the heads-up.
+  Hmmm, perhaps vbatts can tell me what has happened to the ruby bindings...
 +--------------------------+
-Wed Sep 22 03:03:58 UTC 2010
-a/kernel-firmware-2.6.33.4-noarch-2.txz:  Rebuilt.
-a/kernel-generic-2.6.33.4-x86_64-2.txz:  Rebuilt.
-  This kernel has been patched to fix security problems on x86_64:
-    64-bit Compatibility Mode Stack Pointer Underflow (CVE-2010-3081).
-    IA32 System Call Entry Point Vulnerability (CVE-2010-3301).
-  These vulnerabilities allow local users to gain root privileges.
+Tue Nov 29 00:09:21 UTC 2011
+testing/packages/mozilla-thunderbird-9.0b2-x86_64-1.txz:  Added.
++--------------------------+
+Sun Nov 27 03:37:52 UTC 2011
+d/yasm-1.2.0-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.5-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3081
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3301
+    http://www.mozilla.org/security/announce/
   (* Security fix *)
-a/kernel-huge-2.6.33.4-x86_64-2.txz:  Rebuilt.
-  Patched for CVE-2010-3081 and CVE-2010-3301.
+xap/mozilla-firefox-8.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-a/kernel-modules-2.6.33.4-x86_64-2.txz:  Rebuilt.
-d/kernel-headers-2.6.33.4-x86-2.txz:  Rebuilt.
-k/kernel-source-2.6.33.4-noarch-2.txz:  Rebuilt.
-  Patched for CVE-2010-3081 and CVE-2010-3301.
+xap/mozilla-thunderbird-8.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
   (* Security fix *)
-kernels/*:  Rebuilt.
-  Patched for CVE-2010-3081 and CVE-2010-3301.
+xap/seamonkey-2.5-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+  (* Security fix *)
+testing/packages/mozilla-firefox-9.0b3-x86_64-1.txz:  Upgraded.
++--------------------------+
+Wed Nov 23 15:17:39 UTC 2011
+d/make-3.82-x86_64-3.txz:  Rebuilt.
+  Patched a free() crash when building Android.  Thanks to Troy Unrau.
+  Fixed IA32 arch, package locations...  sorry :)
++--------------------------+
+Tue Nov 22 15:23:55 UTC 2011
+testing/packages/mozilla-firefox-9.0b2-x86_64-1.txz:  Upgraded.
++--------------------------+
+Thu Nov 17 02:09:25 UTC 2011
+n/bind-9.7.4_P1-x86_64-1.txz:  Upgraded.
+        --- 9.7.4-P1 released ---
+3218.   [security]      Cache lookup could return RRSIG data associated with
+                        nonexistent records, leading to an assertion
+                        failure. [RT #26590]
+  (* Security fix *)
++--------------------------+
+Sun Nov 13 16:03:06 UTC 2011
+a/glibc-solibs-2.14.1-x86_64-2.txz:  Rebuilt.
+a/glibc-zoneinfo-2011i_2011n-noarch-2.txz:  Rebuilt.
+l/glibc-2.14.1-x86_64-2.txz:  Rebuilt.
+  Merged ELF patches -- Matt Burgess <matthew_at_linuxfromscratch_dot_org>
+l/glibc-i18n-2.14.1-x86_64-2.txz:  Rebuilt.
+l/glibc-profile-2.14.1-x86_64-2.txz:  Rebuilt.
+testing/packages/mozilla-firefox-9.0b1-x86_64-1.txz:  Added.
++--------------------------+
+Fri Nov 11 18:58:21 UTC 2011
+  Good 11-11-11, everyone!  Enjoy some fresh time.  :)
+a/glibc-solibs-2.14.1-x86_64-1.txz:  Upgraded.
+a/glibc-zoneinfo-2011i_2011n-noarch-1.txz:  Upgraded.
+  New upstream homepage:  http://www.iana.org/time-zones
+l/glibc-2.14.1-x86_64-1.txz:  Upgraded.
+l/glibc-i18n-2.14.1-x86_64-1.txz:  Upgraded.
+l/glibc-profile-2.14.1-x86_64-1.txz:  Upgraded.
++--------------------------+
+Tue Nov  8 04:07:49 UTC 2011
+n/openssh-5.9p1-x86_64-2.txz:  Rebuilt.
+  Upstream different timestamp, size, ChangeLog.  GPG verifies on both
+  this newer one and what we had before (?).
+xap/mozilla-firefox-8.0-x86_64-1.txz:  Upgraded.
++--------------------------+
+Tue Oct 11 07:50:04 UTC 2011
+a/file-5.09-x86_64-1.txz:  Upgraded.
+l/seamonkey-solibs-2.4.1-x86_64-1.txz:  Upgraded.
+n/httpd-2.2.21-x86_64-1.txz:  Upgraded.
+  Respond with HTTP_NOT_IMPLEMENTED when the method is not
+  recognized.  [Jean-Frederic Clere]  SECURITY: CVE-2011-3348
+  Fix a regression introduced by the CVE-2011-3192 byterange fix in 2.2.20.
+  PR 51748. [<lowprio20 gmail.com>]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3348
   (* Security fix *)
-usb-and-pxe-installers/usbboot.img:  Rebuilt.
-  Patched for CVE-2010-3081 and CVE-2010-3301.
+xap/mozilla-firefox-7.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+  (* Security fix *)
+xap/mozilla-thunderbird-7.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+  (* Security fix *)
+xap/seamonkey-2.4.1-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
   (* Security fix *)
+testing/packages/mozilla-firefox-8.0b2-x86_64-1.txz:  Upgraded.
++--------------------------+
+Tue Sep  6 16:53:43 UTC 2011
+n/openssh-5.9p1-x86_64-1.txz:  Upgraded.
 +--------------------------+
-Mon Sep 20 18:39:57 UTC 2010
-a/bzip2-1.0.6-x86_64-1.txz:  Upgraded.
-  This update fixes an integer overflow that could allow a specially
-  crafted bzip2 archive to cause a crash (denial of service), or execute
-  arbitrary code.
+Tue Sep  6 00:15:03 UTC 2011
+l/seamonkey-solibs-2.3.3-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+    http://www.mozilla.org/security/announce/2011/mfsa2011-34.html
+  (* Security fix *)
+n/httpd-2.2.20-x86_64-1.txz:  Upgraded.
+  SECURITY: CVE-2011-3192 (cve.mitre.org)
+  core: Fix handling of byte-range requests to use less memory, to avoid
+  denial of service. If the sum of all ranges in a request is larger than
+  the original file, ignore the ranges and send the complete file.
+  PR 51714. [Stefan Fritsch, Jim Jagielski, Ruediger Pluem, Eric Covener]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3192
+  (* Security fix *)
+xap/mozilla-firefox-6.0.2-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
+    http://www.mozilla.org/security/announce/2011/mfsa2011-34.html
+  (* Security fix *)
+xap/mozilla-thunderbird-6.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird.html
+    http://www.mozilla.org/security/announce/2011/mfsa2011-34.html
+  (* Security fix *)
+xap/seamonkey-2.3.3-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+    http://www.mozilla.org/security/announce/2011/mfsa2011-34.html
+  (* Security fix *)
+testing/packages/mozilla-firefox-7.0b4-x86_64-1.txz:  Upgraded.
++--------------------------+
+Thu Aug 25 09:10:45 UTC 2011
+a/kernel-firmware-20110814git-noarch-1.txz:  Upgraded.
+  Fetch the latest kernel firmware from git -- the stuff in the kernel sources
+  is somewhat stale.
+ap/soma-2.7.1-noarch-1.txz:  Added.
+  Soma is a command line/dialog Internet radio player.
+  Thanks to David Woodfall.
+l/jre-6u27-x86_64-1.txz:  Upgraded.
+n/php-5.3.8-x86_64-1.txz:  Upgraded.
+  Security fixes vs. 5.3.6 (5.3.7 was not usable):
+  Updated crypt_blowfish to 1.2. (CVE-2011-2483)
+  Fixed crash in error_log(). Reported by Mateusz Kocielski
+  Fixed buffer overflow on overlog salt in crypt().
+  Fixed bug #54939 (File path injection vulnerability in RFC1867
+  File upload filename). Reported by Krzysztof Kotowicz. (CVE-2011-2202)
+  Fixed stack buffer overflow in socket_connect(). (CVE-2011-1938)
+  Fixed bug #54238 (use-after-free in substr_replace()). (CVE-2011-1148)
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1148
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1938
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2202
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2483
+  (* Security fix *)
+extra/jdk-6/jdk-6u27-x86_64-1.txz:  Upgraded.
+testing/packages/mozilla-firefox-7.0b1-x86_64-1.txz:  Added.
++--------------------------+
+Sun Aug 14 17:49:30 UTC 2011
+n/wget-1.13-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-6.0-x86_64-1.txz:  Upgraded.
++--------------------------+
+Fri Aug 12 23:20:00 UTC 2011
+d/binutils-2.21.53.0.2-x86_64-1.txz:  Upgraded.
+n/bind-9.7.4-x86_64-1.txz:  Upgraded.
+  This BIND update addresses a couple of security issues:
+  * named, set up to be a caching resolver, is vulnerable to a user
+    querying a domain with very large resource record sets (RRSets)
+    when trying to negatively cache the response. Due to an off-by-one
+    error, caching the response could cause named to crash. [RT #24650]
+    [CVE-2011-1910]
+  * Change #2912 (see CHANGES) exposed a latent bug in the DNS message
+    processing code that could allow certain UPDATE requests to crash
+    named. [RT #24777] [CVE-2011-2464]
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1910
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2464
+  (* Security fix *)
++--------------------------+
+Fri Aug 12 00:29:11 UTC 2011
+a/lilo-23.2-x86_64-1.txz:  Upgraded.
+ap/htop-0.9-x86_64-1.txz:  Added.
+  htop is an ncurses-based interactive process viewer.
+  Thanks to Michal Dorocinski for the suggestion.
+ap/sqlite-3.7.7.1-x86_64-1.txz:  Upgraded.
+  Added options: -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_FTS3_PARENTHESIS=1 
+e/emacs-23.3a-x86_64-1.txz:  Upgraded.
+testing/packages/mozilla-firefox-6.0b5-x86_64-1.txz:  Added.
+testing/packages/mozilla-thunderbird-6.0b3-x86_64-1.txz:  Added.
+testing/packages/seamonkey-2.3b3-x86_64-1.txz:  Added.
+testing/packages/seamonkey-solibs-2.3b3-x86_64-1.txz:  Added.
++--------------------------+
+Fri Jul 29 18:22:40 UTC 2011
+ap/screen-4.0.3-x86_64-3.txz:  Rebuilt.
+  Use a larger buffer for the termtype variable to fix crashes with long
+  names (e.g. rxvt-unicode-256color).
+  Thanks to cteg.
+l/libpng-1.4.8-x86_64-1.txz:  Upgraded.
+  Upgraded to libpng-1.2.46 and libpng-1.4.8.
+  Fixed uninitialized memory read in png_format_buffer()
+  (Bug report by Frank Busse, related to CVE-2004-0421).
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0421
+  (* Security fix *)
+n/dhcpcd-5.2.12-x86_64-1.txz:  Upgraded.
+  Sanitize the host name provided by the DHCP server to insure that it does
+  not contain any shell metacharacters.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0996
+  (* Security fix *)
+n/samba-3.5.10-x86_64-1.txz:  Upgraded.
+  Fixed cross-site request forgery and cross-site scripting vulnerability
+  in SWAT (the Samba Web Administration Tool).
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0405
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2522
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2694
   (* Security fix *)
 +--------------------------+
-Fri Sep 17 23:34:42 UTC 2010
-l/seamonkey-solibs-2.0.8-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-3.6.10-x86_64-1.txz:  Upgraded.
-xap/mozilla-thunderbird-3.1.4-x86_64-1.txz:  Upgraded.
-xap/seamonkey-2.0.8-x86_64-1.txz:  Upgraded.
-testing/packages/mozilla-firefox-4.0b6-x86_64-1.txz:  Upgraded.
+Thu Jul 14 21:34:41 UTC 2011
+l/seamonkey-solibs-2.2-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+  (* Security fix *)
+xap/mozilla-firefox-5.0.1-x86_64-1.txz:  Upgraded.
+  I guess this is only a fix for Mac OS X, but it's still 0.0.1 better.  ;-)
+xap/mozilla-thunderbird-5.0-x86_64-1.txz:  Upgraded.
+  Thanks to dolphin77 for some hints about the ./configure options.
+xap/seamonkey-2.2-x86_64-1.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/announce/
+  (* Security fix *)
 +--------------------------+
-Wed Sep 15 18:51:21 UTC 2010
-ap/sudo-1.7.4p4-x86_64-3.txz:  Rebuilt.
-  Hi folks, since the patches for old systems (8.1 - 10.2) were briefly
-  available containing a /var/lib with incorrect permissions, I'm issuing
-  these again just to be 100% sure that no systems out there will be left
-  with problems due to that.  This should do it (third time's the charm).
+Fri Jul  8 16:55:13 UTC 2011
+n/bind-9.7.3_P3-x86_64-1.txz:  Upgraded.
+  A specially constructed packet will cause BIND 9 ("named") to exit,
+  affecting DNS service.  The issue exists in BIND 9.6.3 and newer.
+   "Change #2912 (see CHANGES) exposed a latent bug in the DNS message
+    processing code that could allow certain UPDATE requests to crash
+    named. This was fixed by disambiguating internal database
+    representation vs DNS wire format data. [RT #24777] [CVE-2011-2464]"
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2464
+  (* Security fix *)
+xap/mozilla-thunderbird-3.1.11-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/thunderbird30.html
+  (* Security fix *)
 +--------------------------+
-Wed Sep 15 05:58:55 UTC 2010
-ap/sudo-1.7.4p4-x86_64-2.txz:  Rebuilt.
-  The last sudo packages accidentally changed the permissions on /var from
-  755 to 700.  This build restores the proper permissions.
-  Thanks to Petri Kaukasoina for pointing this out.
+Tue Jun 28 18:19:47 UTC 2011
+ap/ghostscript-9.02-x86_64-2.txz:  Rebuilt.
+  Provide pstoraster -> gstoraster symlink.
+  Include latest History file, but not all the old ones.
+  Is this ready for 13.37/patches now?
 +--------------------------+
-Wed Sep 15 00:41:13 UTC 2010
-ap/sudo-1.7.4p4-x86_64-1.txz:  Upgraded.
-  This fixes a flaw that could lead to privilege escalation.
+Mon Jun 27 21:29:54 UTC 2011
+n/gnutls-2.12.7-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.9.0-x86_64-1.txz:  Upgraded.
+  Fixed a remote denial of service.  A remote attacker could set a specially
+  crafted GIF file as their buddy icon causing vulerable versions of pidgin
+  to crash due to excessive memory use.
   For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2956
+    http://pidgin.im/news/security/?id=52
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2485
+  (* Security fix *)
++--------------------------+
+Fri Jun 24 02:55:39 UTC 2011
+ap/ghostscript-9.02-x86_64-1.txz:  Upgraded.
+  I welcome reports about how well this version of ghostscript works compared
+  with the 9.00 that shipped in Slackware 13.37.  If it fixes important bugs
+  without regressions, then it might be considered as a patch for 13.37.
+l/jre-6u26-x86_64-1.txz:  Upgraded.
+xap/mozilla-firefox-5.0-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
+  For more information, see:
+    http://www.mozilla.org/security/known-vulnerabilities/firefox.html
   (* Security fix *)
-n/samba-3.5.5-x86_64-1.txz:  Upgraded.
-  This upgrade fixes a buffer overflow in the sid_parse() function.
+extra/jdk-6/jdk-6u26-x86_64-1.txz:  Upgraded.
++--------------------------+
+Mon Jun 20 04:09:11 UTC 2011
+n/getmail-4.20.3-x86_64-1.txz:  Upgraded.
+n/fetchmail-6.3.20-x86_64-1.txz:  Upgraded.
+  This release fixes a denial of service in STARTTLS protocol phases.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1947
+    http://www.fetchmail.info/fetchmail-SA-2011-01.txt
+  (* Security fix *)
+l/seamonkey-solibs-2.1-x86_64-1.txz:  Upgraded.
+xap/seamonkey-2.1-x86_64-1.txz:  Upgraded.
++--------------------------+
+Sat May 28 19:28:21 UTC 2011
+a/file-5.07-x86_64-1.txz:  Upgraded.
+d/gcc-4.5.3-x86_64-2.txz:  Rebuilt.
+d/gcc-g++-4.5.3-x86_64-2.txz:  Rebuilt.
+d/gcc-gfortran-4.5.3-x86_64-2.txz:  Rebuilt.
+d/gcc-gnat-4.5.3-x86_64-2.txz:  Rebuilt.
+d/gcc-java-4.5.3-x86_64-2.txz:  Rebuilt.
+d/gcc-objc-4.5.3-x86_64-2.txz:  Rebuilt.
+  Added --enable-objc-gc option to enable Objective-C garbage collection.
+  Thanks to Luca De Pandis.
++--------------------------+
+Fri May 27 22:56:00 UTC 2011
+n/bind-9.7.3_P1-x86_64-1.txz:  Upgraded.
+  This release fixes security issues:
+     * A large RRSET from a remote authoritative server that results in
+       the recursive resolver trying to negatively cache the response can
+       hit an off by one code error in named, resulting in named crashing.
+       [RT #24650] [CVE-2011-1910]
+     * Zones that have a DS record in the parent zone but are also listed
+       in a DLV and won't validate without DLV could fail to validate. [RT
+       #24631]
+  For more information, see:
+    http://www.isc.org/software/bind/advisories/cve-2011-1910
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1910
+  (* Security fix *)
++--------------------------+
+Wed May 25 20:03:16 UTC 2011
+a/cxxlibs-6.0.14-x86_64-2.txz:  Rebuilt.
+a/glibc-solibs-2.13-x86_64-5.txz:  Rebuilt.
+a/glibc-zoneinfo-2.13-noarch-5.txz:  Rebuilt.
+  Upgraded to tzcode2011g and tzdata2011g.
+a/kernel-firmware-2.6.38.7-noarch-1.txz:  Upgraded.
+a/kernel-generic-2.6.38.7-x86_64-1.txz:  Upgraded.
+a/kernel-huge-2.6.38.7-x86_64-1.txz:  Upgraded.
+a/kernel-modules-2.6.38.7-x86_64-1.txz:  Upgraded.
+ap/linuxdoc-tools-0.9.66-x86_64-9.txz:  Rebuilt.
+ap/nano-2.3.1-x86_64-1.txz:  Upgraded.
+d/gcc-4.5.3-x86_64-1.txz:  Upgraded.
+d/gcc-g++-4.5.3-x86_64-1.txz:  Upgraded.
+d/gcc-gfortran-4.5.3-x86_64-1.txz:  Upgraded.
+d/gcc-gnat-4.5.3-x86_64-1.txz:  Upgraded.
+d/gcc-java-4.5.3-x86_64-1.txz:  Upgraded.
+d/gcc-objc-4.5.3-x86_64-1.txz:  Upgraded.
+d/git-1.7.5.1-x86_64-1.txz:  Upgraded.
+d/kernel-headers-2.6.38.7-x86-1.txz:  Upgraded.
+d/perl-5.14.0-x86_64-1.txz:  Upgraded.
+d/subversion-1.6.16-x86_64-2.txz:  Rebuilt.
+k/kernel-source-2.6.38.7-noarch-1.txz:  Upgraded.
+  These are the main configuration changes from the 2.6.37.6 kernel in 13.37:
+    BLK_DEV_LOOP y -> m
+    LOG_BUF_SHIFT 15 -> 18
+    MOUSE_PS2_ELANTECH n -> y
+  And, compared with the 2.6.38.4 kernel in 13.37/testing:
+    LOG_BUF_SHIFT 15 -> 18
+    PREEMPT_NONE y -> n
+    PREEMPT_VOLUNTARY n -> y
+    SCHED_AUTOGROUP y -> n
+  It remains to be seen where the PREEMPT_* options will settle in the future.
+  SCHED_AUTOGROUP still seems sketchy to me, and might be behind some odd
+  clockskew issues.  And, thanks to Carl Wenninger for reporting that the
+  LOG_BUF_SHIFT setting was less than the kernel defaults and was leading to
+  a few missing lines at the beginning of 'dmesg' output.
+kde/kdebindings-4.5.5-x86_64-3.txz:  Rebuilt.
+l/apr-1.4.5-x86_64-1.txz:  Upgraded.
+  This fixes a possible denial of service due to a problem with a loop in
+  the new apr_fnmatch() implementation consuming CPU.
+  For more information, see:
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1928
+  (* Security fix *)
+l/apr-util-1.3.12-x86_64-1.txz:  Upgraded.
+  Fix crash because of NULL cleanup registered by apr_ldap_rebind_init().
+l/glibc-2.13-x86_64-5.txz:  Rebuilt.
+l/glibc-i18n-2.13-x86_64-5.txz:  Rebuilt.
+l/glibc-profile-2.13-x86_64-5.txz:  Rebuilt.
+l/libidn-1.22-x86_64-1.txz:  Rebuilt.
+l/pilot-link-0.12.5-x86_64-4.txz:  Rebuilt.
+l/virtuoso-ose-6.1.2-x86_64-2.txz:  Rebuilt.
+n/gnutls-2.12.5-x86_64-1.txz:  Upgraded.
+n/httpd-2.2.19-x86_64-1.txz:  Upgraded.
+  Revert ABI breakage in 2.2.18 caused by the function signature change
+  of ap_unescape_url_keep2f().  This release restores the signature from
+  2.2.17 and prior, and introduces ap_unescape_url_keep2f_ex().
+  Apache httpd-2.2.18 is considered abandoned.  All users must upgrade.
+n/irssi-0.8.15-x86_64-4.txz:  Rebuilt.
+n/net-snmp-5.6.1-x86_64-2.txz:  Rebuilt.
+n/ntp-4.2.6p3-x86_64-2.txz:  Rebuilt.
+n/obexftp-0.23-x86_64-6.txz:  Rebuilt.
+x/libdrm-2.4.25-x86_64-1.txz:  Upgraded.
+x/mesa-7.10.2-x86_64-1.txz:  Upgraded.
+x/xf86-video-nouveau-git_20110515_8378443-x86_64-1.txz:  Upgraded.
+xap/gv-3.7.2-x86_64-1.txz:  Upgraded.
+xap/imagemagick-6.6.9_8-x86_64-1.txz:  Upgraded.
+xap/pidgin-2.7.11-x86_64-2.txz:  Rebuilt.
+xap/xchat-2.8.8-x86_64-4.txz:  Rebuilt.
+isolinux/initrd.img:  Rebuilt.
+kernels/*:  Upgraded.
+usb-and-pxe-installers/usbboot.img:  Rebuilt.
++--------------------------+
+Fri May 13 20:30:07 UTC 2011
+l/apr-1.4.4-x86_64-1.txz:  Upgraded.
+  This fixes a possible denial of service due to an unconstrained, recursive
+  invocation of apr_fnmatch().  This function has been reimplemented using a
+  non-recursive algorithm.  Thanks to William Rowe.
   For more information, see:
-    http://www.samba.org/samba/security/CVE-2010-3069
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-3069
+    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-0419
   (* Security fix *)
+l/apr-util-1.3.11-x86_64-1.txz:  Upgraded.
+n/httpd-2.2.18-x86_64-1.txz:  Upgraded.
+  This is a bug fix release, but since the upgrades to apr/apr-util require at
+  least an httpd recompile we opted to upgrade to the newest httpd.
 +--------------------------+
-Mon Sep 13 22:15:18 CDT 2010
-testing/packages/mozilla-firefox-4.0b5-x86_64-1.txz:  Upgraded.
+Thu May  5 23:23:20 UTC 2011
+a/coreutils-8.12-x86_64-1.txz:  Upgraded.
 +--------------------------+
-Fri Sep 10 04:07:41 UTC 2010
-l/seamonkey-solibs-2.0.7-x86_64-1.txz:  Upgraded.
-xap/audacious-2.4.0-x86_64-1.txz:  Upgraded.
-xap/audacious-plugins-2.4.0-x86_64-1.txz:  Upgraded.
-xap/gnuplot-4.4.0-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-3.6.9-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
+Mon May  2 20:20:50 UTC 2011
+xap/mozilla-firefox-4.0.1-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
+    http://www.mozilla.org/security/known-vulnerabilities/firefox40.html
   (* Security fix *)
-xap/mozilla-thunderbird-3.1.3-x86_64-1.txz:  Upgraded.
-  This upgrade fixes some more security bugs.
+xap/mozilla-thunderbird-3.1.10-x86_64-1.txz:  Upgraded.
+  This release contains security fixes and improvements.
   For more information, see:
     http://www.mozilla.org/security/known-vulnerabilities/thunderbird31.html
   (* Security fix *)
-xap/seamonkey-2.0.7-x86_64-1.txz:  Upgraded.
-  This release fixes some more security vulnerabilities.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html
-  (* Security fix *)
-+--------------------------+
-Mon Sep  6 22:49:31 UTC 2010
-d/ccache-3.0.1-x86_64-1.txz:  Upgraded.
-d/make-3.82-x86_64-2.txz:  Rebuilt.
-  Added --libdir=/usr/lib${LIBDIRSUFFIX} to fix link problems on x86_64.
-  Thanks to Ed Martin.
-d/mercurial-1.6.3-x86_64-1.txz:  Upgraded.
-kde/k3b-2.0.1-x86_64-1.txz:  Upgraded.
-kde/kdeaccessibility-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdeadmin-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdeartwork-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdebase-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdebase-runtime-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdebase-workspace-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdebindings-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdeedu-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdegames-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdegraphics-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdelibs-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdemultimedia-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdenetwork-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdepim-4.4.5-x86_64-2.txz:  Rebuilt.
-kde/kdepim-runtime-4.4.5-x86_64-2.txz:  Rebuilt.
-kde/kdepimlibs-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdeplasma-addons-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdesdk-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdetoys-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdeutils-4.5.1-x86_64-1.txz:  Upgraded.
-kde/kdevelop-4.0.2-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.0.2-x86_64-1.txz:  Upgraded.
-kde/kdewebdev-4.5.1-x86_64-1.txz:  Upgraded.
-kde/koffice-2.2.2-x86_64-1.txz:  Upgraded.
-kde/oxygen-icons-4.5.1-x86_64-1.txz:  Upgraded.
-kdei/*:  Upgraded.
-l/libdbusmenu-qt-0.6.1-x86_64-1.txz:  Added.
-extra/yasm/yasm-1.1.0-x86_64-1.txz:  Upgraded.
-testing/packages/mozilla-firefox-4.0b4-x86_64-1.txz:  Added.
-+--------------------------+
-Sat Aug 28 21:25:51 UTC 2010
-ap/vim-7.3.003-x86_64-1.txz:  Upgraded.
-l/libxml2-2.7.7-x86_64-1.txz:  Upgraded.
-l/sdl-1.2.14-x86_64-3.txz:  Rebuilt.
-n/wpa_supplicant-0.6.10-x86_64-2.txz:  Rebuilt.
-  Added a missing [D-BUS Service] file.
-  Thanks to Robby Workman.
-x/glew-1.5.5-x86_64-2.txz:  Rebuilt.
-xap/vim-gvim-7.3.003-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Aug 27 00:23:17 UTC 2010
-a/grep-2.6.3-x86_64-2.txz:  Rebuilt.
-  Restored -P option that went missing with the upgrade to 2.6.x.
-  Thanks to Rich.
-a/rpm2tgz-1.2.2-x86_64-1.txz:  Upgraded.
-  Add support for .txz packages and rpm2txz symlink.
-  Avoid (none) values in slack-desc.
-  Add -c option (this works similar to makepkg -c y).
-  Thanks to Igor Murzov for the bugfixes and improvements.
-ap/vim-7.2.446-x86_64-1.txz:  Upgraded.
-  Upgraded to ctags-5.8.
-l/M2Crypto-0.20.2-x86_64-1.txz:  Upgraded.
-l/aspell-0.60.6-x86_64-1.txz:  Upgraded.
-l/audiofile-0.2.7-x86_64-1.txz:  Upgraded.
-l/chmlib-0.40-x86_64-1.txz:  Upgraded.
-l/gtkspell-2.0.16-x86_64-1.txz:  Upgraded.
-l/ilmbase-1.0.2-x86_64-1.txz:  Upgraded.
-l/libart_lgpl-2.3.21-x86_64-1.txz:  Upgraded.
-l/libcddb-1.3.2-x86_64-1.txz:  Upgraded.
-l/libical-0.44-x86_64-1.txz:  Upgraded.
-l/libidl-0.8.14-x86_64-1.txz:  Upgraded.
-l/libidn-1.19-x86_64-1.txz:  Upgraded.
-l/libmcs-0.7.2-x86_64-1.txz:  Upgraded.
-l/libmowgli-0.7.1-x86_64-1.txz:  Upgraded.
-l/libmpc-0.8.2-x86_64-1.txz:  Added.
-l/libnjb-2.2.6-x86_64-5.txz:  Rebuilt.
-l/liboil-0.3.17-x86_64-1.txz:  Upgraded.
-l/libpcap-1.1.1-x86_64-1.txz:  Added.  (split from tcpdump package)
-l/libzip-0.9.3-x86_64-1.txz:  Upgraded.
-l/lzo-2.03-x86_64-1.txz:  Upgraded.
-l/mhash-0.9.9.9-x86_64-1.txz:  Upgraded.
-l/ncurses-5.7-x86_64-3.txz:  Rebuilt.
-l/openexr-1.7.0-x86_64-1.txz:  Upgraded.
-l/pyrex-0.9.9-x86_64-1.txz:  Upgraded.
-l/wavpack-4.60.1-x86_64-1.txz:  Upgraded.
-l/zlib-1.2.5-x86_64-1.txz:  Upgraded.
-n/bridge-utils-1.4-x86_64-1.txz:  Upgraded.
-n/dhcpcd-5.2.7-x86_64-1.txz:  Upgraded.
-n/gnupg2-2.0.16-x86_64-1.txz:  Upgraded.
-  Patched to fix "Realloc Bug with X.509 certificates in GnuPG".
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2547
-  (* Security fix *)
-n/gnutls-2.10.1-x86_64-1.txz:  Upgraded.
-n/httpd-2.2.16-x86_64-1.txz:  Upgraded.
-  Fix Handling of requests without a path segment.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1452
-  (* Security fix *)
-n/iptraf-3.0.0-x86_64-4.txz:  Rebuilt.
-n/iw-0.9.20-x86_64-1.txz:  Upgraded.
-n/lftp-4.0.9-x86_64-1.txz:  Upgraded.
-n/libassuan-2.0.1-x86_64-1.txz:  Upgraded.
-n/libgcrypt-1.4.6-x86_64-1.txz:  Upgraded.
-n/libgpg-error-1.9-x86_64-1.txz:  Upgraded.
-n/libksba-1.0.8-x86_64-1.txz:  Upgraded.
-n/metamail-2.7-x86_64-5.txz:  Rebuilt.
-n/mutt-1.5.20-x86_64-1.txz:  Upgraded.
-  Thanks to Chip Cuccio for help with the new ./configure options.
-n/net-tools-1.60-x86_64-3.txz:  Rebuilt.
-n/php-5.2.14-x86_64-1.txz:  Upgraded.
-  Fixed several security issues.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1917
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2225
-    http://www.php-security.org/2010/05/31/mops-2010-060-php-session-serializer-session-data-injection-vulnerability/index.html
-    http://www.php-security.org/2010/06/25/mops-2010-061-php-splobjectstorage-deserialization-use-after-free-vulnerability/index.html
-  (* Security fix *)
-n/tcpdump-4.1.1-x86_64-1.txz:  Upgraded.
-  This requires the new libpcap package.
-n/tin-1.8.3-x86_64-1.txz:  Upgraded.
-tcl/expect-5.44.1.15-x86_64-1.txz:  Upgraded.
-x/anthy-9100h-x86_64-1.txz:  Upgraded.
-x/glew-1.5.5-x86_64-1.txz:  Upgraded.
-x/libhangul-0.0.11-x86_64-1.txz:  Upgraded.
-x/m17n-lib-1.6.1-x86_64-1.txz:  Upgraded.
-x/xorg-server-1.7.7-x86_64-2.txz:  Rebuilt.
-  Patched to prevent overwriting stack memory and bypassing security mechanisms
-  on systems that use a 2.6 Linux kernel.  Reported by Rafal Wojtczuk.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2240
-  (* Security fix *)
-x/xorg-server-xephyr-1.7.7-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xnest-1.7.7-x86_64-2.txz:  Rebuilt.
-x/xorg-server-xvfb-1.7.7-x86_64-2.txz:  Rebuilt.
-xap/audacious-2.3-x86_64-2.txz:  Rebuilt.
-xap/gimp-2.6.10-x86_64-1.txz:  Upgraded.
-xap/mozilla-thunderbird-3.1.2-x86_64-1.txz:  Upgraded.
-  Added LDAP support which was missing from the x86_64 build.
-  Thanks to Andrew Psaltis for the suggestion.
-xap/pidgin-2.7.3-x86_64-1.txz:  Upgraded.
-  This fixes a crash due to malformed X-Status messages.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2528
-  (* Security fix *)
-xap/vim-gvim-7.2.446-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Sat Jul 31 17:37:45 UTC 2010
-l/akonadi-1.4.0-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Fri Jul 30 00:12:53 UTC 2010
-l/soprano-2.4.64-x86_64-1.txz:  Upgraded.
-l/virtuoso-ose-6.1.2-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Thu Jul 29 01:45:40 UTC 2010
-a/aaa_terminfo-5.7-x86_64-2.txz:  Rebuilt.
-a/dialog-1.1_20100428-x86_64-1.txz:  Upgraded.
-a/ed-1.4-x86_64-1.txz:  Upgraded.
-a/grep-2.6.3-x86_64-1.txz:  Upgraded.
-a/hdparm-9.29-x86_64-1.txz:  Upgraded.
-a/mtx-1.3.12-x86_64-1.txz:  Upgraded.
-a/ncompress-4.2.4.3-x86_64-1.txz:  Upgraded.
-a/patch-2.6.1-x86_64-1.txz:  Upgraded.
-a/procps-3.2.8-x86_64-1.txz:  Upgraded.
-a/sharutils-4.9-x86_64-1.txz:  Upgraded.
-a/tcsh-6.17.00-x86_64-1.txz:  Upgraded.
-a/tree-1.5.3-x86_64-1.txz:  Upgraded.
-a/utempter-1.1.5-x86_64-1.txz:  Upgraded.
-a/zoo-2.10_22-x86_64-1.txz:  Upgraded.
-ap/a2ps-4.14-x86_64-5.txz:  Rebuilt.
-ap/acct-6.5.4-x86_64-1.txz:  Upgraded.
-ap/at-3.1.12-x86_64-1.txz:  Upgraded.
-ap/aumix-2.9.1-x86_64-1.txz:  Upgraded.
-ap/cdrdao-1.2.3-x86_64-1.txz:  Upgraded.
-ap/diffstat-1.53-x86_64-1.txz:  Upgraded.
-ap/enscript-1.6.5.2-x86_64-1.txz:  Upgraded.
-ap/groff-1.20.1-x86_64-2.txz:  Rebuilt.
-  Patched a bug in doc.tmac.  Thanks to Willy Sudiarto Raharjo.
-ap/joe-3.7-x86_64-1.txz:  Upgraded.
-ap/jove-4.16.0.73-x86_64-1.txz:  Upgraded.
-ap/ksh93-2010_06_21-x86_64-1.txz:  Upgraded.
-ap/linuxdoc-tools-0.9.66-x86_64-3.txz:  Rebuilt.
-ap/lsscsi-0.24b1-x86_64-1.txz:  Upgraded.
-ap/sc-7.16-x86_64-3.txz:  Rebuilt.
-ap/texinfo-4.13a-x86_64-4.txz:  Rebuilt.
-ap/sox-14.3.1-x86_64-1.txz:  Upgraded.
-ap/vorbis-tools-1.4.0-x86_64-1.txz:  Upgraded.
-ap/workbone-2.40-x86_64-4.txz:  Rebuilt.
-d/gperf-3.0.4-x86_64-1.txz:  Upgraded.
-d/make-3.82-x86_64-1.txz:  Upgraded.
-d/pkg-config-0.25-x86_64-1.txz:  Upgraded.
-d/strace-4.5.20-x86_64-1.txz:  Upgraded.
-l/jre-6u21-x86_64-1.txz:  Upgraded.
-  Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment
-  Version 6.0 update 21.
-l/libao-1.0.0-x86_64-1.txz:  Upgraded.
-l/libvorbis-1.3.1-x86_64-1.txz:  Upgraded.
-l/libogg-1.2.0-x86_64-1.txz:  Upgraded.
-n/samba-3.5.4-x86_64-1.txz:  Upgraded.
-extra/jdk-6/jdk-6u21-x86_64-1.txz:  Upgraded.
-  Upgraded to Java(TM) 2 Platform Standard Edition Development Kit
-  Version 6.0 update 21.
-+--------------------------+
-Sat Jul 24 03:02:29 UTC 2010
-xap/mozilla-firefox-3.6.8-x86_64-1.txz:  Upgraded.
-  This fixes a regression in Firefox 3.6.7.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
-  (* Security fix *)
-+--------------------------+
-Wed Jul 21 21:37:53 UTC 2010
-d/clisp-2.49-x86_64-1.txz:  Upgraded.
-l/seamonkey-solibs-2.0.6-x86_64-1.txz:  Upgraded.
-xap/mozilla-firefox-3.6.7-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
-  (* Security fix *)
-xap/mozilla-thunderbird-3.1.1-x86_64-1.txz:  Upgraded.
-  This upgrade fixes some more security bugs.
-  (* Security fix *)
-xap/seamonkey-2.0.6-x86_64-1.txz:  Upgraded.
-  This release fixes some more security vulnerabilities.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html
-  (* Security fix *)
-+--------------------------+
-Mon Jul 19 23:36:56 UTC 2010
-n/bind-9.7.1_P2-x86_64-1.txz:  Upgraded.
-  This reverses a change that was introduced in BIND 9.7.1 that could cause
-  cause the server to enter an endless query loop resulting in a denial of
-  service.  (-current only, does not affect any released Slackware)
-  Thanks to Grigorios Bouzakis for pointing out this BIND update.
-  (* Security fix *)
-+--------------------------+
-Sun Jul 18 01:41:06 UTC 2010
-KDE 4.4.5 update -- thanks to Eric Hameleers!
-kde/amarok-2.3.1-x86_64-1.txz:  Upgraded.
-kde/k3b-2.0.0-x86_64-1.txz:  Upgraded.
-kde/kdeaccessibility-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdeadmin-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdeartwork-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-runtime-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdebase-workspace-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdebindings-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdeedu-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdegames-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdegraphics-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdelibs-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdemultimedia-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdenetwork-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdepim-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdepim-runtime-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdepimlibs-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdeplasma-addons-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdesdk-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdetoys-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdeutils-4.4.5-x86_64-1.txz:  Upgraded.
-kde/kdevelop-4.0.1-x86_64-1.txz:  Upgraded.
-kde/kdevplatform-1.0.1-x86_64-1.txz:  Upgraded.
-kde/kdewebdev-4.4.5-x86_64-1.txz:  Upgraded.
-kde/koffice-2.2.1-x86_64-1.txz:  Upgraded.
-kde/ktorrent-4.0.2-x86_64-1.txz:  Upgraded.
-  This now requires libktorrent.
-kde/libktorrent-1.0.2-x86_64-1.txz:  Added.
-kde/oxygen-icons-4.4.5-x86_64-1.txz:  Upgraded.
-kde/polkit-kde-1-r1145544-x86_64-1.txz:  Upgraded.
-kde/polkit-qt-1-r1145513-x86_64-1.txz:  Upgraded.
-kdei/*:  Upgraded.
-l/polkit-1_a2edcef-x86_64-1.txz:  Upgraded.
-l/attica-0.1.4-x86_64-1.txz:  Upgraded.
-l/akonadi-1.3.90-x86_64-1.txz:  Upgraded.
-l/phonon-4.4.2-x86_64-1.txz:  Upgraded.
-l/soprano-2.4.63-x86_64-1.txz:  Upgraded.
-l/shared-desktop-ontologies-0.5-x86_64-1.txz:  Upgraded.
-l/qimageblitz-0.0.6-x86_64-1.txz:  Upgraded.
-l/qt-4.6.3_ef2e850-x86_64-1.txz:  Upgraded.
-testing/packages/btrfs-progs-20100717-x86_64-1.txz:  Upgraded.
-+--------------------------+
-Wed Jun 30 04:51:49 UTC 2010
-l/libpng-1.4.3-x86_64-1.txz:  Upgraded.
-  Upgraded to libpng-1.2.44 and libpng-1.4.3.
-  This fixes out-of-bounds memory write bugs that could lead to crashes
-  or the execution of arbitrary code, and a memory leak bug which could
-  lead to application crashes.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1205
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2249
-  (* Security fix *)
-l/libtiff-3.9.4-x86_64-1.txz:  Upgraded.
-  This fixes image structure handling bugs that could lead to crashes or
-  execution of arbitrary code if a specially-crafted TIFF image is loaded.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1411
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2065
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2067
-  (* Security fix *)
-+--------------------------+
-Sun Jun 27 17:25:18 UTC 2010
-xap/mozilla-firefox-3.6.6-x86_64-1.txz:  Upgraded.
-  This changes the crash protection feature to increase the timeout
-  before a plugin is considered non-responsive.
-+--------------------------+
-Sun Jun 27 03:43:13 UTC 2010
-ap/ghostscript-8.71-x86_64-3.txz:  Rebuilt.
-  Merged an upstream patch from Till Kamppeter to fix printing black pages
-  with CUPS and certain printers.
-+--------------------------+
-Fri Jun 25 05:28:02 UTC 2010
-a/cups-1.4.4-x86_64-1.txz:  Upgraded.
-  Fixed a memory allocation error in texttops.
-  Fixed a Cross-Site Request Forgery (CSRF) that could allow a remote
-  attacker to reconfigure or disable CUPS if a CUPS admin logged into the
-  web interface visited a specially-crafted website.
-  Fixed a bug where uninitialized memory from the cupsd process could
-  reveal sensitive information.
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0540
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0542
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1748
-  (* Security fix *)
-d/ccache-3.0-x86_64-1.txz:  Upgraded.
-d/gdb-7.1-x86_64-2.txz:  Rebuilt.
-  Added --with-python=no to fix errors about missing backtrace.py, which is
-  not yet in stable glib.  Thanks to David Woodfall.
-l/imlib-1.9.15-x86_64-7.txz:  Rebuilt.
-  This fixes problems linking with libpng.
-l/seamonkey-solibs-2.0.5-x86_64-1.txz:  Upgraded.
-n/bind-9.7.1-x86_64-1.txz:  Upgraded.
-  This fixes possible DNS cache poisoning attacks when DNSSEC is enabled
-  and checking is disabled (CD).
-  For more information, see:
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4022
-    http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0097
-  (* Security fix *)
-  Thanks to Rob McGee for help with the upgrade to BIND 9.7.x.
-xap/mozilla-firefox-3.6.4-x86_64-1.txz:  Upgraded.
-  This fixes some security issues.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html
-  (* Security fix *)
-xap/mozilla-thunderbird-3.1-x86_64-1.txz:  Upgraded.
-  (* Security fix *)
-xap/seamonkey-2.0.5-x86_64-1.txz:  Upgraded.
-  This release fixes some more security vulnerabilities.
-  For more information, see:
-    http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html
-  (* Security fix *)
-+--------------------------+
-Sat Jun 19 00:59:41 UTC 2010
-testing/packages/btrfs-progs-20100618-x86_64-1.txz:
-  Added btrfs-convert.  Thanks to mancha.
-+--------------------------+
-Fri Jun 18 18:12:04 UTC 2010
-ap/alsa-utils-1.0.23-x86_64-2.txz:  Rebuilt.
-  Patched alsaconf to generate /etc/modprobe.d/sound.conf.
-  Thanks to Alan Hicks.
-kde/kdebase-workspace-4.4.3-x86_64-2.txz:  Rebuilt.
-  Patched xinitrc.kde to launch with ck-launch-session only if the
-  DESKTOP_SESSION variable is empty.  This fixes a bug where a ck-aware
-  login manager such as KDM may have already launched a ConsoleKit
-  session, causing the xinitrc to launch another one and marking the
-  first one inactive.  This can lead to auth failures.
-  Thanks to Robby Workman.
-n/samba-3.5.3-x86_64-1.txz:  Upgraded.
-xap/xfce-4.6.1-x86_64-9.txz:  Rebuilt.
-  Patched xinitrc.xfce to launch with ck-launch-session only if the
-  DESKTOP_SESSION variable is empty.  Thanks to Robby Workman.
-+--------------------------+
-Wed May 19 08:58:23 UTC 2010
-Slackware 13.1 x86_64 stable is released!
-Lots of thanks are due -- see the RELEASE_NOTES and the rest of the
-ChangeLog for credits.  The ISOs are on their way to replication,
-a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
-We are taking pre-orders now at store.slackware.com, and offering 
-a discount if you sign up for a subscription.  Consider picking up
-a copy to help support the project.  Thanks again to the Slackware
-community for testing, contributing, and generally holding us to a
-high level of quality.  :-)
-Enjoy!
++--------------------------+
+Mon Apr 25 13:37:00 UTC 2011
+Slackware 13.37 x86_64 stable is released!
+
+Thanks to everyone who pitched in on this release: the Slackware team,
+the folks producing upstream code, and linuxquestions.org for providing
+a great forum for collaboration and testing.
+
+The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a dual-sided
+32-bit/64-bit x86/x86_64 DVD.  Please consider supporting the Slackware
+project by picking up a copy from store.slackware.com.  We're taking
+pre-orders now, and offer a discount if you sign up for a subscription.
+
+As always, thanks to the Slackware community for testing, suggestions,
+and feedback.  :-)
+
+Have fun!
++--------------------------+
diff --git a/FILELIST.TXT b/FILELIST.TXT
index 87994e49..75e1dc30 100644
--- a/FILELIST.TXT
+++ b/FILELIST.TXT
@@ -1,9458 +1,6530 @@
-Mon Apr 25 17:03:04 UTC 2011
+Wed Sep 26 03:38:46 UTC 2012
 
 Here is the file list for this directory.  If you are using a 
 mirror site and find missing or extra files in the disk 
 subdirectories, please have the archive administrator refresh
 the mirror.
 
-drwxr-xr-x 12 root root      4096 Apr 25 17:03 .
--rw-r--r--  1 root root     10188 Apr 25 04:36 ./ANNOUNCE.13_37
--rw-r--r--  1 root root     20933 Oct  2  2006 ./BOOTING.TXT
--rw-r--r--  1 root root     14744 Apr 23 17:22 ./CHANGES_AND_HINTS.TXT
--rw-r--r--  1 root root    658810 Apr 25 13:58 ./CHECKSUMS.md5
--rw-r--r--  1 root root       198 Apr 25 13:58 ./CHECKSUMS.md5.asc
--rw-r--r--  1 root root     17976 Jun 10  1994 ./COPYING
--rw-r--r--  1 root root     35147 Jun 30  2007 ./COPYING3
--rw-r--r--  1 root root     19531 Aug 26  2009 ./COPYRIGHT.TXT
--rw-r--r--  1 root root       616 Oct  2  2006 ./CRYPTO_NOTICE.TXT
--rw-r--r--  1 root root    126748 Apr 25 13:37 ./ChangeLog.txt
--rw-r--r--  1 root root    872123 Apr 25 13:55 ./FILELIST.TXT
--rw-r--r--  1 root root      1565 Feb 26  2003 ./GPG-KEY
--rw-r--r--  1 root root    542310 Apr 25 13:50 ./PACKAGES.TXT
--rw-r--r--  1 root root      8815 Apr 21 23:38 ./README.TXT
--rw-r--r--  1 root root      3644 Apr  7 11:02 ./README.initrd
--rw-r--r--  1 root root     34068 Apr  8 15:15 ./README_CRYPT.TXT
--rw-r--r--  1 root root      8978 Apr  8 15:16 ./README_LVM.TXT
--rw-r--r--  1 root root     17957 Mar 15 18:32 ./README_RAID.TXT
--rw-r--r--  1 root root    361680 Apr 25 17:03 ./READ_DVD.TXT
--rw-r--r--  1 root root      3623 Apr 25 04:57 ./RELEASE_NOTES
--rw-r--r--  1 root root     13855 Dec  8  2008 ./SPEAKUP_DOCS.TXT
--rw-r--r--  1 root root     17294 Dec  8  2008 ./SPEAK_INSTALL.TXT
--rw-r--r--  1 root root     58732 May 18  2010 ./Slackware-HOWTO
--rw-r--r--  1 root root      7012 Apr  6 16:50 ./UPGRADE.TXT
-drwxr-xr-x 18 root root      4096 Apr 24 03:37 ./extra
--rw-r--r--  1 root root     33251 Apr 24 03:37 ./extra/CHECKSUMS.md5
--rw-r--r--  1 root root       198 Apr 24 03:37 ./extra/CHECKSUMS.md5.asc
--rw-r--r--  1 root root     42266 Apr 24 03:36 ./extra/FILE_LIST
--rw-r--r--  1 root root    152298 Apr 24 03:37 ./extra/MANIFEST.bz2
--rw-r--r--  1 root root     34233 Apr 24 03:37 ./extra/PACKAGES.TXT
--rw-r--r--  1 root root       149 Feb  9  2002 ./extra/README.TXT
-drwxr-xr-x  2 root root     20480 Aug 14  2009 ./extra/aspell-word-lists
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-af-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    868976 Oct  3  2008 ./extra/aspell-word-lists/aspell-af-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-af-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-am-0.03_1-noarch-4.txt
--rw-r--r--  1 root root    106700 Oct  3  2008 ./extra/aspell-word-lists/aspell-am-0.03_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-am-0.03_1-noarch-4.txz.asc
--rw-r--r--  1 root root       195 Oct  3  2008 ./extra/aspell-word-lists/aspell-az-0.02_0-noarch-4.txt
--rw-r--r--  1 root root    126472 Oct  3  2008 ./extra/aspell-word-lists/aspell-az-0.02_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-az-0.02_0-noarch-4.txz.asc
--rw-r--r--  1 root root       199 Oct  3  2008 ./extra/aspell-word-lists/aspell-be-0.01-noarch-4.txt
--rw-r--r--  1 root root   9455764 Oct  3  2008 ./extra/aspell-word-lists/aspell-be-0.01-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-be-0.01-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-bg-4.0_0-noarch-4.txt
--rw-r--r--  1 root root   5413300 Oct  3  2008 ./extra/aspell-word-lists/aspell-bg-4.0_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-bg-4.0_0-noarch-4.txz.asc
--rw-r--r--  1 root root       193 Oct  3  2008 ./extra/aspell-word-lists/aspell-bn-0.01.1_1-noarch-4.txt
--rw-r--r--  1 root root    582408 Oct  3  2008 ./extra/aspell-word-lists/aspell-bn-0.01.1_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-bn-0.01.1_1-noarch-4.txz.asc
--rw-r--r--  1 root root       168 Oct  3  2008 ./extra/aspell-word-lists/aspell-br-0.50_2-noarch-4.txt
--rw-r--r--  1 root root    308936 Oct  3  2008 ./extra/aspell-word-lists/aspell-br-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-br-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       185 Oct  3  2008 ./extra/aspell-word-lists/aspell-ca-20040130_1-noarch-4.txt
--rw-r--r--  1 root root   1052772 Oct  3  2008 ./extra/aspell-word-lists/aspell-ca-20040130_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ca-20040130_1-noarch-4.txz.asc
--rw-r--r--  1 root root       185 Oct  3  2008 ./extra/aspell-word-lists/aspell-cs-20040614_1-noarch-4.txt
--rw-r--r--  1 root root   2049648 Oct  3  2008 ./extra/aspell-word-lists/aspell-cs-20040614_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-cs-20040614_1-noarch-4.txz.asc
--rw-r--r--  1 root root       203 Oct  3  2008 ./extra/aspell-word-lists/aspell-csb-0.02_0-noarch-4.txt
--rw-r--r--  1 root root     42324 Oct  3  2008 ./extra/aspell-word-lists/aspell-csb-0.02_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-csb-0.02_0-noarch-4.txz.asc
--rw-r--r--  1 root root       167 Oct  3  2008 ./extra/aspell-word-lists/aspell-cy-0.50_3-noarch-4.txt
--rw-r--r--  1 root root   1745716 Oct  3  2008 ./extra/aspell-word-lists/aspell-cy-0.50_3-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-cy-0.50_3-noarch-4.txz.asc
--rw-r--r--  1 root root       182 Oct  3  2008 ./extra/aspell-word-lists/aspell-da-1.4.42_1-noarch-4.txt
--rw-r--r--  1 root root   3045652 Oct  3  2008 ./extra/aspell-word-lists/aspell-da-1.4.42_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-da-1.4.42_1-noarch-4.txz.asc
--rw-r--r--  1 root root       186 Oct  3  2008 ./extra/aspell-word-lists/aspell-de-20030222_1-noarch-4.txt
--rw-r--r--  1 root root   2872868 Oct  3  2008 ./extra/aspell-word-lists/aspell-de-20030222_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-de-20030222_1-noarch-4.txz.asc
--rw-r--r--  1 root root       167 Oct  3  2008 ./extra/aspell-word-lists/aspell-el-0.50_3-noarch-4.txt
--rw-r--r--  1 root root   3216592 Oct  3  2008 ./extra/aspell-word-lists/aspell-el-0.50_3-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-el-0.50_3-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-eo-0.50_2-noarch-4.txt
--rw-r--r--  1 root root   3797376 Oct  3  2008 ./extra/aspell-word-lists/aspell-eo-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-eo-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-es-0.50_2-noarch-4.txt
--rw-r--r--  1 root root   2958592 Oct  3  2008 ./extra/aspell-word-lists/aspell-es-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-es-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       176 Oct  3  2008 ./extra/aspell-word-lists/aspell-et-0.1.21_1-noarch-4.txt
--rw-r--r--  1 root root    877160 Oct  3  2008 ./extra/aspell-word-lists/aspell-et-0.1.21_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-et-0.1.21_1-noarch-4.txz.asc
--rw-r--r--  1 root root       188 Oct  3  2008 ./extra/aspell-word-lists/aspell-fa-0.02_0-noarch-4.txt
--rw-r--r--  1 root root   1488308 Oct  3  2008 ./extra/aspell-word-lists/aspell-fa-0.02_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-fa-0.02_0-noarch-4.txz.asc
--rw-r--r--  1 root root       175 Oct  3  2008 ./extra/aspell-word-lists/aspell-fi-0.7_0-noarch-4.txt
--rw-r--r--  1 root root    606924 Oct  3  2008 ./extra/aspell-word-lists/aspell-fi-0.7_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-fi-0.7_0-noarch-4.txz.asc
--rw-r--r--  1 root root       186 Oct  3  2008 ./extra/aspell-word-lists/aspell-fo-0.2.16_1-noarch-4.txt
--rw-r--r--  1 root root    997552 Oct  3  2008 ./extra/aspell-word-lists/aspell-fo-0.2.16_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-fo-0.2.16_1-noarch-4.txz.asc
--rw-r--r--  1 root root       168 Oct  3  2008 ./extra/aspell-word-lists/aspell-fr-0.50_3-noarch-4.txt
--rw-r--r--  1 root root   4365324 Oct  3  2008 ./extra/aspell-word-lists/aspell-fr-0.50_3-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-fr-0.50_3-noarch-4.txz.asc
--rw-r--r--  1 root root       183 Oct  3  2008 ./extra/aspell-word-lists/aspell-ga-3.6_0-noarch-4.txt
--rw-r--r--  1 root root   2144676 Oct  3  2008 ./extra/aspell-word-lists/aspell-ga-3.6_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ga-3.6_0-noarch-4.txz.asc
--rw-r--r--  1 root root       194 Oct  3  2008 ./extra/aspell-word-lists/aspell-gd-0.1.1_1-noarch-4.txt
--rw-r--r--  1 root root    131084 Oct  3  2008 ./extra/aspell-word-lists/aspell-gd-0.1.1_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-gd-0.1.1_1-noarch-4.txz.asc
--rw-r--r--  1 root root       170 Oct  3  2008 ./extra/aspell-word-lists/aspell-gl-0.50_0-noarch-4.txt
--rw-r--r--  1 root root   2981948 Oct  3  2008 ./extra/aspell-word-lists/aspell-gl-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-gl-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       200 Oct  3  2008 ./extra/aspell-word-lists/aspell-gu-0.02_0-noarch-4.txt
--rw-r--r--  1 root root     59216 Oct  3  2008 ./extra/aspell-word-lists/aspell-gu-0.02_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-gu-0.02_0-noarch-4.txz.asc
--rw-r--r--  1 root root       173 Oct  3  2008 ./extra/aspell-word-lists/aspell-gv-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    218880 Oct  3  2008 ./extra/aspell-word-lists/aspell-gv-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-gv-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       187 Oct  3  2008 ./extra/aspell-word-lists/aspell-he-1.0_0-noarch-4.txt
--rw-r--r--  1 root root   1991800 Oct  3  2008 ./extra/aspell-word-lists/aspell-he-1.0_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-he-1.0_0-noarch-4.txz.asc
--rw-r--r--  1 root root       191 Oct  3  2008 ./extra/aspell-word-lists/aspell-hi-0.01_0-noarch-4.txt
--rw-r--r--  1 root root    116448 Oct  3  2008 ./extra/aspell-word-lists/aspell-hi-0.01_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-hi-0.01_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-hil-0.11_0-noarch-4.txt
--rw-r--r--  1 root root    114780 Oct  3  2008 ./extra/aspell-word-lists/aspell-hil-0.11_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-hil-0.11_0-noarch-4.txz.asc
--rw-r--r--  1 root root       170 Oct  3  2008 ./extra/aspell-word-lists/aspell-hr-0.51_0-noarch-4.txt
--rw-r--r--  1 root root   1945240 Oct  3  2008 ./extra/aspell-word-lists/aspell-hr-0.51_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-hr-0.51_0-noarch-4.txz.asc
--rw-r--r--  1 root root       209 Oct  3  2008 ./extra/aspell-word-lists/aspell-hsb-0.01_1-noarch-4.txt
--rw-r--r--  1 root root    318392 Oct  3  2008 ./extra/aspell-word-lists/aspell-hsb-0.01_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-hsb-0.01_1-noarch-4.txz.asc
--rw-r--r--  1 root root       177 Oct  3  2008 ./extra/aspell-word-lists/aspell-hu-0.99.4.2_0-noarch-4.txt
--rw-r--r--  1 root root   1586716 Oct  3  2008 ./extra/aspell-word-lists/aspell-hu-0.99.4.2_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-hu-0.99.4.2_0-noarch-4.txz.asc
--rw-r--r--  1 root root       173 Oct  3  2008 ./extra/aspell-word-lists/aspell-ia-0.50_1-noarch-4.txt
--rw-r--r--  1 root root    549808 Oct  3  2008 ./extra/aspell-word-lists/aspell-ia-0.50_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ia-0.50_1-noarch-4.txz.asc
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-id-1.2_0-noarch-4.txt
--rw-r--r--  1 root root    213320 Oct  3  2008 ./extra/aspell-word-lists/aspell-id-1.2_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-id-1.2_0-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-is-0.51.1_0-noarch-4.txt
--rw-r--r--  1 root root   1505496 Oct  3  2008 ./extra/aspell-word-lists/aspell-is-0.51.1_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-is-0.51.1_0-noarch-4.txz.asc
--rw-r--r--  1 root root       186 Oct  3  2008 ./extra/aspell-word-lists/aspell-it-2.2_20050523_0-noarch-4.txt
--rw-r--r--  1 root root    643296 Oct  3  2008 ./extra/aspell-word-lists/aspell-it-2.2_20050523_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-it-2.2_20050523_0-noarch-4.txz.asc
--rw-r--r--  1 root root       182 Oct  3  2008 ./extra/aspell-word-lists/aspell-ku-0.12_0-noarch-4.txt
--rw-r--r--  1 root root     55296 Oct  3  2008 ./extra/aspell-word-lists/aspell-ku-0.12_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ku-0.12_0-noarch-4.txz.asc
--rw-r--r--  1 root root       173 Oct  3  2008 ./extra/aspell-word-lists/aspell-la-20020503_0-noarch-4.txt
--rw-r--r--  1 root root    122204 Oct  3  2008 ./extra/aspell-word-lists/aspell-la-20020503_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-la-20020503_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-lt-1.1+cvs20060103_0-noarch-4.txt
--rw-r--r--  1 root root    567968 Oct  3  2008 ./extra/aspell-word-lists/aspell-lt-1.1+cvs20060103_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-lt-1.1+cvs20060103_0-noarch-4.txz.asc
--rw-r--r--  1 root root       175 Oct  3  2008 ./extra/aspell-word-lists/aspell-lv-0.5.5_1-noarch-4.txt
--rw-r--r--  1 root root    186808 Oct  3  2008 ./extra/aspell-word-lists/aspell-lv-0.5.5_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-lv-0.5.5_1-noarch-4.txz.asc
--rw-r--r--  1 root root       176 Oct  3  2008 ./extra/aspell-word-lists/aspell-mg-0.03_0-noarch-4.txt
--rw-r--r--  1 root root    116888 Oct  3  2008 ./extra/aspell-word-lists/aspell-mg-0.03_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mg-0.03_0-noarch-4.txz.asc
--rw-r--r--  1 root root       167 Oct  3  2008 ./extra/aspell-word-lists/aspell-mi-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    144836 Oct  3  2008 ./extra/aspell-word-lists/aspell-mi-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mi-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       172 Oct  3  2008 ./extra/aspell-word-lists/aspell-mk-0.50_0-noarch-4.txt
--rw-r--r--  1 root root   1250820 Oct  3  2008 ./extra/aspell-word-lists/aspell-mk-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mk-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       192 Oct  3  2008 ./extra/aspell-word-lists/aspell-mn-0.01_0-noarch-4.txt
--rw-r--r--  1 root root     68124 Oct  3  2008 ./extra/aspell-word-lists/aspell-mn-0.01_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mn-0.01_0-noarch-4.txz.asc
--rw-r--r--  1 root root       193 Oct  3  2008 ./extra/aspell-word-lists/aspell-mr-0.10_0-noarch-4.txt
--rw-r--r--  1 root root    474624 Oct  3  2008 ./extra/aspell-word-lists/aspell-mr-0.10_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mr-0.10_0-noarch-4.txz.asc
--rw-r--r--  1 root root       167 Oct  3  2008 ./extra/aspell-word-lists/aspell-ms-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    116524 Oct  3  2008 ./extra/aspell-word-lists/aspell-ms-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ms-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-mt-0.50_0-noarch-4.txt
--rw-r--r--  1 root root   5060516 Oct  3  2008 ./extra/aspell-word-lists/aspell-mt-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-mt-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       178 Aug 13  2009 ./extra/aspell-word-lists/aspell-nb-0.50.1_0-noarch-4.txt
--rw-r--r--  1 root root   3039436 Aug 13  2009 ./extra/aspell-word-lists/aspell-nb-0.50.1_0-noarch-4.txz
--rw-r--r--  1 root root       197 Aug 13  2009 ./extra/aspell-word-lists/aspell-nb-0.50.1_0-noarch-4.txz.asc
--rw-r--r--  1 root root       206 Oct  3  2008 ./extra/aspell-word-lists/aspell-nds-0.01_0-noarch-4.txt
--rw-r--r--  1 root root     39836 Oct  3  2008 ./extra/aspell-word-lists/aspell-nds-0.01_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-nds-0.01_0-noarch-4.txz.asc
--rw-r--r--  1 root root       167 Oct  3  2008 ./extra/aspell-word-lists/aspell-nl-0.50_2-noarch-4.txt
--rw-r--r--  1 root root   1495132 Oct  3  2008 ./extra/aspell-word-lists/aspell-nl-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-nl-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       179 Oct  3  2008 ./extra/aspell-word-lists/aspell-nn-0.50.1_1-noarch-4.txt
--rw-r--r--  1 root root   1907332 Oct  3  2008 ./extra/aspell-word-lists/aspell-nn-0.50.1_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-nn-0.50.1_1-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-no-0.50_2-noarch-4.txt
--rw-r--r--  1 root root   1250336 Oct  3  2008 ./extra/aspell-word-lists/aspell-no-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-no-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       176 Oct  3  2008 ./extra/aspell-word-lists/aspell-ny-0.01_0-noarch-4.txt
--rw-r--r--  1 root root     40792 Oct  3  2008 ./extra/aspell-word-lists/aspell-ny-0.01_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ny-0.01_0-noarch-4.txz.asc
--rw-r--r--  1 root root       191 Oct  3  2008 ./extra/aspell-word-lists/aspell-or-0.03_1-noarch-4.txt
--rw-r--r--  1 root root     14948 Oct  3  2008 ./extra/aspell-word-lists/aspell-or-0.03_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-or-0.03_1-noarch-4.txz.asc
--rw-r--r--  1 root root       196 Oct  3  2008 ./extra/aspell-word-lists/aspell-pa-0.01_1-noarch-4.txt
--rw-r--r--  1 root root     21904 Oct  3  2008 ./extra/aspell-word-lists/aspell-pa-0.01_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-pa-0.01_1-noarch-4.txz.asc
--rw-r--r--  1 root root       168 Oct  3  2008 ./extra/aspell-word-lists/aspell-pl-0.51_0-noarch-4.txt
--rw-r--r--  1 root root  13943900 Oct  3  2008 ./extra/aspell-word-lists/aspell-pl-0.51_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-pl-0.51_0-noarch-4.txz.asc
--rw-r--r--  1 root root       172 Oct  3  2008 ./extra/aspell-word-lists/aspell-pt-0.50_2-noarch-4.txt
--rw-r--r--  1 root root   2279084 Oct  3  2008 ./extra/aspell-word-lists/aspell-pt-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-pt-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       246 Jun 22  2009 ./extra/aspell-word-lists/aspell-pt_BR-20080707_0-noarch-4.txt
--rw-r--r--  1 root root   2450800 Jun 22  2009 ./extra/aspell-word-lists/aspell-pt_BR-20080707_0-noarch-4.txz
--rw-r--r--  1 root root       197 Jun 22  2009 ./extra/aspell-word-lists/aspell-pt_BR-20080707_0-noarch-4.txz.asc
--rw-r--r--  1 root root       196 Oct  3  2008 ./extra/aspell-word-lists/aspell-qu-0.02_0-noarch-4.txt
--rw-r--r--  1 root root    303040 Oct  3  2008 ./extra/aspell-word-lists/aspell-qu-0.02_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-qu-0.02_0-noarch-4.txz.asc
--rw-r--r--  1 root root       170 Oct  3  2008 ./extra/aspell-word-lists/aspell-ro-0.50_2-noarch-4.txt
--rw-r--r--  1 root root    281784 Oct  3  2008 ./extra/aspell-word-lists/aspell-ro-0.50_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ro-0.50_2-noarch-4.txz.asc
--rw-r--r--  1 root root       192 Oct  3  2008 ./extra/aspell-word-lists/aspell-ru-0.99f7_1-noarch-4.txt
--rw-r--r--  1 root root   1425980 Oct  3  2008 ./extra/aspell-word-lists/aspell-ru-0.99f7_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ru-0.99f7_1-noarch-4.txz.asc
--rw-r--r--  1 root root       173 Oct  3  2008 ./extra/aspell-word-lists/aspell-rw-0.50_0-noarch-4.txt
--rw-r--r--  1 root root     37644 Oct  3  2008 ./extra/aspell-word-lists/aspell-rw-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-rw-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-sc-1.0-noarch-4.txt
--rw-r--r--  1 root root   4911444 Oct  3  2008 ./extra/aspell-word-lists/aspell-sc-1.0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sc-1.0-noarch-4.txz.asc
--rw-r--r--  1 root root       168 Oct  3  2008 ./extra/aspell-word-lists/aspell-sk-0.52_0-noarch-4.txt
--rw-r--r--  1 root root   4641936 Oct  3  2008 ./extra/aspell-word-lists/aspell-sk-0.52_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sk-0.52_0-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-sl-0.50_0-noarch-4.txt
--rw-r--r--  1 root root   5272152 Oct  3  2008 ./extra/aspell-word-lists/aspell-sl-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sl-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-sr-0.02-noarch-4.txt
--rw-r--r--  1 root root   3705620 Oct  3  2008 ./extra/aspell-word-lists/aspell-sr-0.02-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sr-0.02-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-sv-0.51_0-noarch-4.txt
--rw-r--r--  1 root root    985180 Oct  3  2008 ./extra/aspell-word-lists/aspell-sv-0.51_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sv-0.51_0-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-sw-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    301120 Oct  3  2008 ./extra/aspell-word-lists/aspell-sw-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-sw-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       191 Oct  3  2008 ./extra/aspell-word-lists/aspell-ta-20040424_1-noarch-4.txt
--rw-r--r--  1 root root     99988 Oct  3  2008 ./extra/aspell-word-lists/aspell-ta-20040424_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-ta-20040424_1-noarch-4.txz.asc
--rw-r--r--  1 root root       195 Oct  3  2008 ./extra/aspell-word-lists/aspell-te-0.01_2-noarch-4.txt
--rw-r--r--  1 root root    906648 Oct  3  2008 ./extra/aspell-word-lists/aspell-te-0.01_2-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-te-0.01_2-noarch-4.txz.asc
--rw-r--r--  1 root root       179 Oct  3  2008 ./extra/aspell-word-lists/aspell-tet-0.1.1-noarch-4.txt
--rw-r--r--  1 root root     65792 Oct  3  2008 ./extra/aspell-word-lists/aspell-tet-0.1.1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-tet-0.1.1-noarch-4.txz.asc
--rw-r--r--  1 root root       175 Oct  3  2008 ./extra/aspell-word-lists/aspell-tl-0.02_1-noarch-4.txt
--rw-r--r--  1 root root     97512 Oct  3  2008 ./extra/aspell-word-lists/aspell-tl-0.02_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-tl-0.02_1-noarch-4.txz.asc
--rw-r--r--  1 root root       176 Oct  3  2008 ./extra/aspell-word-lists/aspell-tn-1.0.1_0-noarch-4.txt
--rw-r--r--  1 root root     42928 Oct  3  2008 ./extra/aspell-word-lists/aspell-tn-1.0.1_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-tn-1.0.1_0-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-tr-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    494344 Oct  3  2008 ./extra/aspell-word-lists/aspell-tr-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-tr-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       171 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-0.51_0-noarch-4.txt
--rw-r--r--  1 root root   4719068 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-0.51_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-0.51_0-noarch-4.txz.asc
--rw-r--r--  1 root root       200 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-1.1_0-noarch-4.txt
--rw-r--r--  1 root root    527632 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-1.1_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-uk-1.1_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-uz-0.5_0-noarch-4.txt
--rw-r--r--  1 root root    235116 Oct  3  2008 ./extra/aspell-word-lists/aspell-uz-0.5_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-uz-0.5_0-noarch-4.txz.asc
--rw-r--r--  1 root root       193 Oct  3  2008 ./extra/aspell-word-lists/aspell-vi-0.01.1_1-noarch-4.txt
--rw-r--r--  1 root root     42408 Oct  3  2008 ./extra/aspell-word-lists/aspell-vi-0.01.1_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-vi-0.01.1_1-noarch-4.txz.asc
--rw-r--r--  1 root root       169 Oct  3  2008 ./extra/aspell-word-lists/aspell-wa-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    647916 Oct  3  2008 ./extra/aspell-word-lists/aspell-wa-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-wa-0.50_0-noarch-4.txz.asc
--rw-r--r--  1 root root       190 Oct  3  2008 ./extra/aspell-word-lists/aspell-yi-0.01.1_1-noarch-4.txt
--rw-r--r--  1 root root    396496 Oct  3  2008 ./extra/aspell-word-lists/aspell-yi-0.01.1_1-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-yi-0.01.1_1-noarch-4.txz.asc
--rw-r--r--  1 root root       166 Oct  3  2008 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txt
--rw-r--r--  1 root root    489764 Oct  3  2008 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txz.asc
-drwxr-xr-x  2 root root      4096 Apr 20 04:47 ./extra/bash-completion
--rw-r--r--  1 root root       669 Apr 20 02:28 ./extra/bash-completion/bash-completion-1.3-noarch-4.txt
--rw-r--r--  1 root root    122524 Apr 20 02:28 ./extra/bash-completion/bash-completion-1.3-noarch-4.txz
--rw-r--r--  1 root root       198 Apr 20 02:28 ./extra/bash-completion/bash-completion-1.3-noarch-4.txz.asc
-drwxr-xr-x  2 root root      4096 May 14  2010 ./extra/bittornado
--rw-r--r--  1 root root       444 May 13  2010 ./extra/bittornado/bittornado-0.3.18-noarch-2.txt
--rw-r--r--  1 root root    235960 May 13  2010 ./extra/bittornado/bittornado-0.3.18-noarch-2.txz
--rw-r--r--  1 root root       198 May 13  2010 ./extra/bittornado/bittornado-0.3.18-noarch-2.txz.asc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/bittorrent
--rw-r--r--  1 root root      1279 Feb  8  2006 ./extra/bittorrent/README
--rw-r--r--  1 root root       613 May  1  2009 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txt
--rw-r--r--  1 root root    336536 May  1  2009 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txz
--rw-r--r--  1 root root       197 May  1  2009 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txz.asc
-drwxr-xr-x  2 root root      4096 May 14  2010 ./extra/brltty
--rw-r--r--  1 root root       326 May 11  2010 ./extra/brltty/brltty-4.2-x86_64-1.txt
--rw-r--r--  1 root root    973460 May 11  2010 ./extra/brltty/brltty-4.2-x86_64-1.txz
--rw-r--r--  1 root root       198 May 11  2010 ./extra/brltty/brltty-4.2-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 Mar 12 21:21 ./extra/emacspeak
--rw-r--r--  1 root root       665 Mar 12 20:46 ./extra/emacspeak/emacspeak-33.0-x86_64-1.txt
--rw-r--r--  1 root root   5731676 Mar 12 20:46 ./extra/emacspeak/emacspeak-33.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 12 20:46 ./extra/emacspeak/emacspeak-33.0-x86_64-1.txz.asc
-lrwxrwxrwx  1 root root        25 Aug 23  2009 ./extra/flashplayer-plugin -> source/flashplayer-plugin
-drwxr-xr-x  2 root root      4096 Apr 24 03:36 ./extra/fvwm-2.6.1
--rw-r--r--  1 root root       368 Apr 24 01:27 ./extra/fvwm-2.6.1/fvwm-2.6.1-x86_64-1.txt
--rw-r--r--  1 root root   1517896 Apr 24 01:27 ./extra/fvwm-2.6.1/fvwm-2.6.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 24 01:27 ./extra/fvwm-2.6.1/fvwm-2.6.1-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 Apr  3 06:05 ./extra/google-chrome
--rw-r--r--  1 root root       249 Mar 22 05:21 ./extra/google-chrome/GConf-2.32.1-x86_64-1.txt
--rw-r--r--  1 root root    901148 Mar 22 05:21 ./extra/google-chrome/GConf-2.32.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 22 05:21 ./extra/google-chrome/GConf-2.32.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       522 Mar 22 05:15 ./extra/google-chrome/ORBit2-2.14.19-x86_64-1.txt
--rw-r--r--  1 root root    289336 Mar 22 05:15 ./extra/google-chrome/ORBit2-2.14.19-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 22 05:15 ./extra/google-chrome/ORBit2-2.14.19-x86_64-1.txz.asc
--rw-r--r--  1 root root      1723 Apr  3 05:19 ./extra/google-chrome/README
--rw-r--r--  1 root root       714 Apr  3 05:15 ./extra/google-chrome/google-chrome-pam-solibs-1.1.3-x86_64-1.txt
--rw-r--r--  1 root root     20068 Apr  3 05:15 ./extra/google-chrome/google-chrome-pam-solibs-1.1.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  3 05:15 ./extra/google-chrome/google-chrome-pam-solibs-1.1.3-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      3874 Mar 22 05:24 ./extra/google-chrome/google-chrome.SlackBuild
--rw-r--r--  1 root root       844 Mar 22 05:07 ./extra/google-chrome/slack-desc
-drwxr-xr-x  2 root root      4096 Apr 24 03:36 ./extra/jdk-6
--rw-r--r--  1 root root       367 Apr 24 03:04 ./extra/jdk-6/jdk-6u25-x86_64-1.txt
--rw-r--r--  1 root root  72633772 Apr 24 03:04 ./extra/jdk-6/jdk-6u25-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 24 03:04 ./extra/jdk-6/jdk-6u25-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/mplayerplug-in
--rw-r--r--  1 root root       534 May 19  2009 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txt
--rw-r--r--  1 root root    176148 May 19  2009 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txz
--rw-r--r--  1 root root       197 May 19  2009 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 May  3  2010 ./extra/partitionmanager
--rw-r--r--  1 root root       391 May  3  2010 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txt
--rw-r--r--  1 root root    423800 May  3  2010 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/recordmydesktop
--rw-r--r--  1 root root       675 May 12  2009 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txt
--rw-r--r--  1 root root    128724 May 12  2009 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txz
--rw-r--r--  1 root root       197 May 12  2009 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txz.asc
-drwxr-xr-x 19 root root      4096 Apr 24 01:24 ./extra/source
-drwxr-xr-x  2 root root      4096 Mar  6 18:15 ./extra/source/GConf
--rw-r--r--  1 root root   1300408 Nov 10 14:19 ./extra/source/GConf/GConf-2.32.1.tar.xz
--rwxr-xr-x  1 root root      3646 Mar 22 05:17 ./extra/source/GConf/GConf.SlackBuild
--rw-r--r--  1 root root       107 Sep 28  2010 ./extra/source/GConf/GConf.url
--rw-r--r--  1 root root       278 Oct 12  2010 ./extra/source/GConf/doinst.sh.gz
--rw-r--r--  1 root root       706 Mar 22 05:20 ./extra/source/GConf/slack-desc
-drwxr-xr-x  2 root root      4096 Mar 22 05:12 ./extra/source/ORBit2
--rw-r--r--  1 root root    632956 Sep 28  2010 ./extra/source/ORBit2/ORBit2-2.14.19.tar.xz
--rwxr-xr-x  1 root root      3297 Mar 22 05:14 ./extra/source/ORBit2/ORBit2.SlackBuild
--rw-r--r--  1 root root       111 Sep 28  2010 ./extra/source/ORBit2/ORBit2.url
--rw-r--r--  1 root root       979 May 16  2010 ./extra/source/ORBit2/slack-desc
-drwxr-xr-x  3 root root      4096 Mar 22 03:01 ./extra/source/bash-completion
--rw-r--r--  1 root root    211899 Feb  6 19:35 ./extra/source/bash-completion/bash-completion-1.3.tar.bz2
--rwxr-xr-x  1 root root      3390 Apr 19 14:02 ./extra/source/bash-completion/bash-completion.SlackBuild
--rw-r--r--  1 root root       115 Feb  7 03:53 ./extra/source/bash-completion/bash_completion.sh.gz
-drwxr-xr-x  2 root root      4096 Apr 19 14:01 ./extra/source/bash-completion/contrib
--rw-r--r--  1 root root      2767 Apr 19 14:00 ./extra/source/bash-completion/contrib/pkgtools
--rw-r--r--  1 root root       364 Apr 19 14:01 ./extra/source/bash-completion/contrib/rpm2tgz
--rw-r--r--  1 root root      1811 Apr 19 14:01 ./extra/source/bash-completion/contrib/sbopkg
--rw-r--r--  1 root root      3092 Apr 19 14:01 ./extra/source/bash-completion/contrib/slackpkg
--rw-r--r--  1 root root      3901 Apr 19 14:01 ./extra/source/bash-completion/contrib/slapt
--rw-r--r--  1 root root       458 Mar 22 03:01 ./extra/source/bash-completion/fixup-sh-script-completions.diff.gz
--rw-r--r--  1 root root      1135 Jul 15  2009 ./extra/source/bash-completion/slack-desc
-drwxr-xr-x  2 root root      4096 Feb 10  2007 ./extra/source/bittornado
--rw-r--r--  1 root root    159270 Dec 23  2006 ./extra/source/bittornado/BitTornado-0.3.18.tar.bz2
--rwxr-xr-x  1 root root      1026 May 13  2010 ./extra/source/bittornado/bittornado.SlackBuild
--rw-r--r--  1 root root       913 Jul 14  2005 ./extra/source/bittornado/btdownloadxterm.sh.gz
--rw-r--r--  1 root root       283 Feb  8  2006 ./extra/source/bittornado/doinst.sh.gz
--rw-r--r--  1 root root       905 Jan  4  2005 ./extra/source/bittornado/slack-desc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/source/bittorrent
--rw-r--r--  1 root root    678768 Jan 31  2006 ./extra/source/bittorrent/BitTorrent-4.4.0.tar.bz2
--rw-r--r--  1 root root       940 Feb  8  2006 ./extra/source/bittorrent/bittorrent-xterm.sh.gz
--rwxr-xr-x  1 root root      2473 May 19  2009 ./extra/source/bittorrent/bittorrent.SlackBuild
--rw-r--r--  1 root root       270 Feb  8  2006 ./extra/source/bittorrent/doinst.sh.gz
--rw-r--r--  1 root root      1074 Sep 21  2003 ./extra/source/bittorrent/slack-desc
-drwxr-xr-x  2 root root      4096 May 11  2010 ./extra/source/brltty
--rw-r--r--  1 root root   1328272 May 10  2010 ./extra/source/brltty/brltty-4.2.tar.xz
--rwxr-xr-x  1 root root      4010 May 11  2010 ./extra/source/brltty/brltty.SlackBuild
--rw-r--r--  1 root root       783 Jun  7  2002 ./extra/source/brltty/slack-desc
-drwxr-xr-x  2 root root      4096 Mar 12 20:44 ./extra/source/emacspeak
--rw-r--r--  1 root root   5609520 Nov 24 18:18 ./extra/source/emacspeak/emacspeak-33.0.tar.xz
--rwxr-xr-x  1 root root      4438 Mar 12 20:44 ./extra/source/emacspeak/emacspeak.SlackBuild
--rw-r--r--  1 root root       513 Mar 12 20:43 ./extra/source/emacspeak/emacspeak.tcl8.5.diff.gz
--rw-r--r--  1 root root      1125 Jun  7  2002 ./extra/source/emacspeak/slack-desc
-drwxr-xr-x  2 root root      4096 Mar  8 23:06 ./extra/source/flashplayer-plugin
--rwxr-xr--  1 root root      6838 Dec  1 19:14 ./extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild
--rw-r--r--  1 root root      1017 Dec 16  2008 ./extra/source/flashplayer-plugin/slack-desc
-drwxr-xr-x  2 root root      4096 Apr 24 01:18 ./extra/source/fvwm-2.6.1
--rw-r--r--  1 root root       296 Apr 24 01:11 ./extra/source/fvwm-2.6.1/doinst.sh.gz
--rw-r--r--  1 root root   2094260 Apr 16 21:30 ./extra/source/fvwm-2.6.1/fvwm-2.6.1.tar.xz
--rwxr-xr-x  1 root root      3955 Apr 24 01:27 ./extra/source/fvwm-2.6.1/fvwm.SlackBuild
--rw-r--r--  1 root root       823 Apr 24 01:16 ./extra/source/fvwm-2.6.1/slack-desc
--rw-r--r--  1 root root       344 Dec 21 04:04 ./extra/source/fvwm-2.6.1/xinitrc.fvwm2.gz
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/source/grub
--rw-r--r--  1 root root      7697 Mar 14  2009 ./extra/source/grub/grub-0.97-x86_64.patch.gz
--rw-r--r--  1 root root    971783 Jul 31  2005 ./extra/source/grub/grub-0.97.tar.gz
--rw-r--r--  1 root root        65 May  8  2005 ./extra/source/grub/grub-0.97.tar.gz.sig
--rwxr-xr-x  1 root root      3549 May 19  2009 ./extra/source/grub/grub.SlackBuild
--rw-r--r--  1 root root      1746 Mar  5  2008 ./extra/source/grub/grub_support_256byte_inode.patch.gz
--rw-r--r--  1 root root     11715 Mar 25  2006 ./extra/source/grub/grubconfig-1.28.tar.gz
--rw-r--r--  1 root root       466 Jun  6  2007 ./extra/source/grub/grubconfig_localefix.patch.gz
--rw-r--r--  1 root root       959 Sep  1  2005 ./extra/source/grub/slack-desc
-drwxr-xr-x  3 root root      4096 Apr 24 03:05 ./extra/source/jdk-6
--r--r--r--  1 root root      3339 Apr 14 08:51 ./extra/source/jdk-6/COPYRIGHT
--rw-r--r--  1 root root       265 Dec 19 00:08 ./extra/source/jdk-6/HOWTO-BUILD-TXZ
--r--r--r--  1 root root        40 Apr 14 08:51 ./extra/source/jdk-6/LICENSE
--r--r--r--  1 root root       115 Apr 14 08:51 ./extra/source/jdk-6/README.html
--r--r--r--  1 root root        50 Apr 14 08:51 ./extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt
--rwxr-xr-x  1 root root      3906 Apr 24 03:00 ./extra/source/jdk-6/jdk.SlackBuild
-drwxr-xr-x  2 root root      4096 Sep  1  2007 ./extra/source/jdk-6/profile.d
--rwxr-xr-x  1 root root       143 Aug 29  2007 ./extra/source/jdk-6/profile.d/jdk.csh
--rwxr-xr-x  1 root root       146 Aug 29  2007 ./extra/source/jdk-6/profile.d/jdk.sh
--r--r--r--  1 root root      5297 Apr 24 03:00 ./extra/source/jdk-6/register.html
--r--r--r--  1 root root      6743 Apr 24 03:00 ./extra/source/jdk-6/register_ja.html
--r--r--r--  1 root root      4900 Apr 24 03:00 ./extra/source/jdk-6/register_zh_CN.html
--rw-r--r--  1 root root       822 Dec 18 23:16 ./extra/source/jdk-6/slack-desc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/source/mplayerplug-in
--rw-r--r--  1 root root    281845 Jun 24  2008 ./extra/source/mplayerplug-in/mplayerplug-in-3.55.tar.gz
--rwxr-xr--  1 root root      8298 May 19  2009 ./extra/source/mplayerplug-in/mplayerplug-in.SlackBuild
--rw-r--r--  1 root root       999 Nov  6  2006 ./extra/source/mplayerplug-in/slack-desc
-drwxr-xr-x  3 root root      4096 Apr  3 05:16 ./extra/source/pam
--rw-r--r--  1 root root    863472 Oct 28 14:19 ./extra/source/pam/Linux-PAM-1.1.3.tar.xz
--rwxr-xr-x  1 root root      3514 Apr  3 05:15 ./extra/source/pam/make-pam-solibs-for-chrome.sh
--rw-rw-r--  1 root root     36304 Dec 16  2008 ./extra/source/pam/pam-redhat-0.99.10-1.tar.bz2
--rwxr-xr-x  1 root root      5966 Apr  3 04:43 ./extra/source/pam/pam.SlackBuild
-drwxr-xr-x  2 root root      4096 Apr  3 04:29 ./extra/source/pam/patches
--rw-r--r--  1 root root       508 Feb  8 14:09 ./extra/source/pam/patches/pam-1.0.90-redhat-modules.patch.gz
--rw-r--r--  1 root root       947 Feb  8 14:09 ./extra/source/pam/patches/pam-1.0.91-std-noclose.patch.gz
--rw-r--r--  1 root root       354 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.0-notally.patch.gz
--rw-r--r--  1 root root     11569 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.1-faillock.patch.gz
--rw-r--r--  1 root root       443 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.2-noflex.patch.gz
--rw-r--r--  1 root root      1893 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-faillock-screensaver.patch.gz
--rw-r--r--  1 root root       976 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-limits-nosetreuid.patch.gz
--rw-r--r--  1 root root      3174 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-limits-range.patch.gz
--rw-r--r--  1 root root       487 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-nouserenv.patch.gz
--rw-r--r--  1 root root       667 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-pwhistory-incomplete.patch.gz
--rw-r--r--  1 root root      1590 Feb  8 14:09 ./extra/source/pam/patches/pam-1.1.3-securetty-console.patch.gz
--rw-r--r--  1 root root       896 Apr  3 03:08 ./extra/source/pam/slack-desc
-drwxr-xr-x  2 root root      4096 May  3  2010 ./extra/source/partitionmanager
--rw-r--r--  1 root root       118 Dec 24  2007 ./extra/source/partitionmanager/doinst.sh.gz
--rw-r--r--  1 root root    292808 Apr 24  2010 ./extra/source/partitionmanager/partitionmanager-1.0.2.tar.xz
--rwxr-xr-x  1 root root      3258 May  3  2010 ./extra/source/partitionmanager/partitionmanager.SlackBuild
--rw-r--r--  1 root root       852 Jan 13  2009 ./extra/source/partitionmanager/slack-desc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./extra/source/recordmydesktop
--rw-r--r--  1 root root    185528 Nov 23  2008 ./extra/source/recordmydesktop/qt-recordmydesktop-0.3.8.tar.gz
--rw-r--r--  1 root root    198732 Dec 13  2008 ./extra/source/recordmydesktop/recordmydesktop-0.3.8.1.tar.gz
--rwxr-xr--  1 root root      8324 May 19  2009 ./extra/source/recordmydesktop/recordmydesktop.SlackBuild
--rw-r--r--  1 root root      1140 Feb 19  2010 ./extra/source/recordmydesktop/slack-desc
-drwxr-xr-x  2 root root      4096 Jun  3  2009 ./extra/source/tightvnc
--rw-r--r--  1 root root      8109 Jun  2  2009 ./extra/source/tightvnc/_tightvnc.tar.gz
--rw-r--r--  1 root root       387 Jun  2  2009 ./extra/source/tightvnc/doinst.sh.gz
--rw-r--r--  1 root root       989 Dec  4  2008 ./extra/source/tightvnc/slack-desc
--rw-r--r--  1 root root   1549080 Mar  6  2009 ./extra/source/tightvnc/tightvnc-1.3.10_unixsrc.tar.xz
--rwxr-xr--  1 root root      4093 Jun 14  2009 ./extra/source/tightvnc/tightvnc.SlackBuild
--rw-r--r--  1 root root       728 Jun  2  2009 ./extra/source/tightvnc/tightvnc.paths-and-perms.diff.gz
-drwxr-xr-x  2 root root      4096 Apr  2  2010 ./extra/source/wicd
--rw-r--r--  1 root root       775 Jun 21  2009 ./extra/source/wicd/README.SLACKWARE
--rw-r--r--  1 root root       500 May 30  2009 ./extra/source/wicd/doinst.sh.gz
--rw-r--r--  1 root root       863 Jun  5  2009 ./extra/source/wicd/slack-desc
--rw-r--r--  1 root root       439 Apr  2  2010 ./extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff.gz
--rw-r--r--  1 root root       475 Apr  2  2010 ./extra/source/wicd/wicd-1.7.0-fix_script_bug.diff.gz
--rw-r--r--  1 root root    411166 Jan 15  2010 ./extra/source/wicd/wicd-1.7.0.tar.bz2
--rwxr-xr-x  1 root root      3091 Apr  2  2010 ./extra/source/wicd/wicd.SlackBuild
-drwxr-xr-x  2 root root      4096 Jun  3  2009 ./extra/tightvnc
--rw-r--r--  1 root root       530 Jun  3  2009 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txt
--rw-r--r--  1 root root    777368 Jun  3  2009 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Jun  3  2009 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 Apr 30  2010 ./extra/wicd
--rw-r--r--  1 root root       775 Jun 21  2009 ./extra/wicd/README.SLACKWARE
--rw-r--r--  1 root root       407 Apr 30  2010 ./extra/wicd/wicd-1.7.0-x86_64-2.txt
--rw-r--r--  1 root root    356948 Apr 30  2010 ./extra/wicd/wicd-1.7.0-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 30  2010 ./extra/wicd/wicd-1.7.0-x86_64-2.txz.asc
-drwxr-xr-x  2 root root      4096 Jan 31 03:46 ./extra/xf86-video-nouveau-blacklist
--rw-r--r--  1 root root       645 Apr 27  2010 ./extra/xf86-video-nouveau-blacklist/xf86-video-nouveau-blacklist-noarch-1.txt
--rw-r--r--  1 root root       880 Apr 27  2010 ./extra/xf86-video-nouveau-blacklist/xf86-video-nouveau-blacklist-noarch-1.txz
--rw-r--r--  1 root root       198 Apr 27  2010 ./extra/xf86-video-nouveau-blacklist/xf86-video-nouveau-blacklist-noarch-1.txz.asc
-drwxr-xr-x  3 root root      4096 Apr 23 21:44 ./isolinux
--rw-r--r--  1 root root      5103 Apr 14 19:33 ./isolinux/README.TXT
--rw-r--r--  1 root root       788 Mar 17  2007 ./isolinux/README_SPLIT.TXT
--rw-r--r--  1 root root       470 Mar 23 23:53 ./isolinux/f2.txt
--rw-r--r--  1 root root  16133793 Apr 23 21:43 ./isolinux/initrd.img
--rw-r--r--  1 root root        50 Jan 18  2003 ./isolinux/iso.sort
--rw-r--r--  1 root root     14336 Jan 19  2010 ./isolinux/isolinux.bin
--rw-r--r--  1 root root       417 Mar 25 03:15 ./isolinux/isolinux.cfg
--rw-r--r--  1 root root       645 Apr  7 22:29 ./isolinux/message.txt
-drwxr-xr-x  2 root root      4096 Mar 17  2003 ./isolinux/sbootmgr
--rwxr-xr-x  1 root root     36064 May 12  1995 ./isolinux/sbootmgr/RAWRITE.EXE
--rw-r--r--  1 root root      2138 Dec  1  1997 ./isolinux/sbootmgr/RAWRITE12.DOC
--rwxr-xr-x  1 root root     13052 Dec  1  1997 ./isolinux/sbootmgr/RAWRITE12.EXE
-lrwxrwxrwx  1 root root        11 Aug 23  2009 ./isolinux/sbootmgr/RAWRITE13.EXE -> RAWRITE.EXE
--rw-r--r--  1 root root      6170 Aug 29  2000 ./isolinux/sbootmgr/RAWRITENT.DOC
--rwxr-xr-x  1 root root     24576 Aug 29  2000 ./isolinux/sbootmgr/RAWRITENT.EXE
--rw-r--r--  1 root root      1291 Mar 17  2003 ./isolinux/sbootmgr/README.TXT
--rw-r--r--  1 root root    110592 Mar 16  2003 ./isolinux/sbootmgr/sbootmgr.dsk
--rw-r--r--  1 root root      2823 May  2  2005 ./isolinux/setpkg
-drwxr-xr-x  5 root root      4096 Apr 12 17:42 ./kernels
--rw-r--r--  1 root root        41 Apr  7 22:20 ./kernels/VERSIONS.TXT
-drwxr-xr-x  2 root root      4096 Apr 10 03:50 ./kernels/huge.s
--rw-r--r--  1 root root    575987 Apr 10 03:49 ./kernels/huge.s/System.map.gz
--rw-r--r--  1 root root   5866144 Apr 10 03:49 ./kernels/huge.s/bzImage
--rw-r--r--  1 root root    112298 Apr 10 03:43 ./kernels/huge.s/config
-drwxr-xr-x  2 root root      4096 Mar 25 03:15 ./kernels/memtest
--rw-r--r--  1 root root        60 Mar 24 00:19 ./kernels/memtest/README
--rw-r--r--  1 root root    164504 Mar 23 23:53 ./kernels/memtest/memtest
-drwxr-xr-x  2 root root      4096 Mar  2 22:16 ./kernels/speakup.s
--rw-r--r--  1 root root       240 Mar  2 22:16 ./kernels/speakup.s/README.TXT
-drwxr-xr-x  3 root root      4096 Apr 16 04:36 ./pasture
--rw-r--r--  1 root root      2769 Apr 16 04:36 ./pasture/CHECKSUMS.md5
--rw-r--r--  1 root root       198 Apr 16 04:36 ./pasture/CHECKSUMS.md5.asc
--rw-r--r--  1 root root      3734 Apr 16 04:36 ./pasture/FILE_LIST
--rw-r--r--  1 root root     40638 Apr 16 04:36 ./pasture/MANIFEST.bz2
--rw-r--r--  1 root root      2867 Apr 16 04:36 ./pasture/PACKAGES.TXT
--rw-r--r--  1 root root       336 Nov 29 05:00 ./pasture/gxine-0.5.905-x86_64-1.txt
--rw-r--r--  1 root root    370376 Nov 29 05:00 ./pasture/gxine-0.5.905-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 29 05:00 ./pasture/gxine-0.5.905-x86_64-1.txz.asc
--rw-r--r--  1 root root       468 Oct 12  2010 ./pasture/make-3.81-x86_64-3.txt
--rw-r--r--  1 root root    383848 Oct 12  2010 ./pasture/make-3.81-x86_64-3.txz
--rw-r--r--  1 root root       198 Oct 12  2010 ./pasture/make-3.81-x86_64-3.txz.asc
--rw-r--r--  1 root root       335 Feb  4 03:58 ./pasture/mesa-7.8.2-x86_64-1.txt
--rw-r--r--  1 root root   3918620 Feb  4 03:58 ./pasture/mesa-7.8.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  4 03:58 ./pasture/mesa-7.8.2-x86_64-1.txz.asc
-drwxr-xr-x  7 root root      4096 Apr 16 03:04 ./pasture/source
-drwxr-xr-x  2 root root      4096 Nov 28 22:42 ./pasture/source/gxine
--rw-r--r--  1 root root   1203720 Nov 28 22:42 ./pasture/source/gxine/gxine-0.5.905.tar.bz2
--rwxr-xr-x  1 root root      3458 Nov 29 04:59 ./pasture/source/gxine/gxine.SlackBuild
--rw-r--r--  1 root root       453 Feb  2  2006 ./pasture/source/gxine/gxine.desktop.gz
--rw-r--r--  1 root root       792 Sep 23  2003 ./pasture/source/gxine/slack-desc
-drwxr-xr-x  2 root root      4096 May 19  2009 ./pasture/source/make
--rw-r--r--  1 root root   1151445 Apr  1  2006 ./pasture/source/make/make-3.81.tar.bz2
--rw-r--r--  1 root root        65 Apr  1  2006 ./pasture/source/make/make-3.81.tar.bz2.sig
--rwxr-xr-x  1 root root      3119 Oct 12  2010 ./pasture/source/make/make.SlackBuild
--rw-r--r--  1 root root       923 Mar 23  2002 ./pasture/source/make/slack-desc
-drwxr-xr-x  2 root root      4096 Nov  5 19:44 ./pasture/source/mesa-7.8.2
--rw-r--r--  1 root root  14061000 Jun 17  2010 ./pasture/source/mesa-7.8.2/MesaDemos-7.8.2.tar.xz
--rw-r--r--  1 root root    150144 Jun 17  2010 ./pasture/source/mesa-7.8.2/MesaGLUT-7.8.2.tar.xz
--rw-r--r--  1 root root   4153012 Jun 17  2010 ./pasture/source/mesa-7.8.2/MesaLib-7.8.2.tar.xz
--rw-r--r--  1 root root       352 Mar 10  2008 ./pasture/source/mesa-7.8.2/README.GIT
--rw-r--r--  1 root root       301 Mar 10  2008 ./pasture/source/mesa-7.8.2/get-mesa.sh
--rwxr-xr-x  1 root root      4390 Apr  9  2010 ./pasture/source/mesa-7.8.2/mesa.SlackBuild
--rw-r--r--  1 root root        36 Dec  5  2009 ./pasture/source/mesa-7.8.2/mesa.url
--rw-r--r--  1 root root       790 Feb  5  2007 ./pasture/source/mesa-7.8.2/slack-desc
-drwxr-xr-x  2 root root      4096 Feb  8 20:41 ./pasture/source/xf86-video-ati
--rw-r--r--  1 root root    823096 Sep 27  2010 ./pasture/source/xf86-video-ati/xf86-video-ati-6.13.2.tar.xz
-drwxr-xr-x  2 root root      4096 Apr 16 03:03 ./pasture/source/xf86-video-intel
--rw-r--r--  1 root root    767096 Jan  7 23:49 ./pasture/source/xf86-video-intel-2.14.0.tar.xz
--rw-r--r--  1 root root       374 Nov 13 19:04 ./pasture/xf86-video-ati-6.13.2-x86_64-1.txt
--rw-r--r--  1 root root    342244 Nov 13 19:04 ./pasture/xf86-video-ati-6.13.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 19:04 ./pasture/xf86-video-ati-6.13.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       400 Feb  1 01:20 ./pasture/xf86-video-intel-2.14.0-x86_64-1.txt
--rw-r--r--  1 root root    194652 Feb  1 01:20 ./pasture/xf86-video-intel-2.14.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  1 01:20 ./pasture/xf86-video-intel-2.14.0-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 May 18  2010 ./patches
--rw-r--r--  1 root root       531 May 18  2010 ./patches/CHECKSUMS.md5
--rw-r--r--  1 root root       198 May 18  2010 ./patches/CHECKSUMS.md5.asc
--rw-r--r--  1 root root       575 May 18  2010 ./patches/FILE_LIST
--rw-r--r--  1 root root        14 May 18  2010 ./patches/MANIFEST.bz2
--rw-r--r--  1 root root       224 May 18  2010 ./patches/PACKAGES.TXT
-drwxr-xr-x  3 root root      4096 Sep 25  2006 ./slackbook
-drwxr-xr-x 11 root root      4096 Sep 25  2006 ./slackbook/html
--rw-r--r--  1 root root      3259 May 12  2005 ./slackbook/html/TRADEMARKS.html
--rw-r--r--  1 root root      4361 Apr 23  2005 ./slackbook/html/archive-files-bzip2.html
--rw-r--r--  1 root root      9821 May 10  2005 ./slackbook/html/archive-files-tar.html
--rw-r--r--  1 root root      3978 Apr 23  2005 ./slackbook/html/archive-files-zip.html
--rw-r--r--  1 root root      5345 Apr 23  2005 ./slackbook/html/archive-files.html
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/basic-network-commands
--rw-r--r--  1 root root      6838 May 12  2005 ./slackbook/html/basic-network-commands-dns.html
--rw-r--r--  1 root root      9768 May  5  2005 ./slackbook/html/basic-network-commands-email.html
--rw-r--r--  1 root root      4453 May  5  2005 ./slackbook/html/basic-network-commands-finger.html
--rw-r--r--  1 root root      9338 May 12  2005 ./slackbook/html/basic-network-commands-ftp.html
--rw-r--r--  1 root root      3890 Apr 23  2005 ./slackbook/html/basic-network-commands-ssh.html
--rw-r--r--  1 root root      6210 May 12  2005 ./slackbook/html/basic-network-commands-talk.html
--rw-r--r--  1 root root      6298 May 12  2005 ./slackbook/html/basic-network-commands-telnet.html
--rw-r--r--  1 root root      4092 May  5  2005 ./slackbook/html/basic-network-commands-traceroute.html
--rw-r--r--  1 root root      7857 May 12  2005 ./slackbook/html/basic-network-commands-web.html
--rw-r--r--  1 root root      5418 May 12  2005 ./slackbook/html/basic-network-commands.html
--rw-r--r--  1 root root      3421 May  1  2005 ./slackbook/html/basic-network-commands/elm.png
--rw-r--r--  1 root root      5204 May  1  2005 ./slackbook/html/basic-network-commands/links.png
--rw-r--r--  1 root root      7544 May  1  2005 ./slackbook/html/basic-network-commands/lynx.png
--rw-r--r--  1 root root      2489 May  1  2005 ./slackbook/html/basic-network-commands/mutt.png
--rw-r--r--  1 root root      4689 May  1  2005 ./slackbook/html/basic-network-commands/pine.png
--rw-r--r--  1 root root       491 May  1  2005 ./slackbook/html/basic-network-commands/talk.png
--rw-r--r--  1 root root       952 May  1  2005 ./slackbook/html/basic-network-commands/ytalk.png
--rw-r--r--  1 root root     13925 May  5  2005 ./slackbook/html/book-preface.html
--rw-r--r--  1 root root    517269 May 12  2005 ./slackbook/html/book.html
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/booting
--rw-r--r--  1 root root     12607 May 12  2005 ./slackbook/html/booting-dual.html
--rw-r--r--  1 root root      4110 Apr 23  2005 ./slackbook/html/booting-loadlin.html
--rw-r--r--  1 root root      8952 May  5  2005 ./slackbook/html/booting.html
--rw-r--r--  1 root root      6986 May  1  2005 ./slackbook/html/booting/setup-lilo-expert-w.png
--rw-r--r--  1 root root      5824 May  1  2005 ./slackbook/html/booting/setup-lilo-w.png
--rw-r--r--  1 root root      2950 Apr 24  2005 ./slackbook/html/docbook.css
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/emacs
--rw-r--r--  1 root root      7301 Apr 24  2005 ./slackbook/html/emacs-basic-editing.html
--rw-r--r--  1 root root      4989 May  5  2005 ./slackbook/html/emacs-buffers.html
--rw-r--r--  1 root root      6305 May  5  2005 ./slackbook/html/emacs-modes.html
--rw-r--r--  1 root root      4466 May  5  2005 ./slackbook/html/emacs-saving-files.html
--rw-r--r--  1 root root      7785 May 12  2005 ./slackbook/html/emacs.html
--rw-r--r--  1 root root      7842 Apr 24  2005 ./slackbook/html/emacs/emacs.png
--rw-r--r--  1 root root      9989 May  5  2005 ./slackbook/html/essential-sysadmin-hardusers.html
--rw-r--r--  1 root root     10340 May  5  2005 ./slackbook/html/essential-sysadmin-shutdown.html
--rw-r--r--  1 root root     18830 May  5  2005 ./slackbook/html/essential-sysadmin.html
--rw-r--r--  1 root root      5492 May 12  2005 ./slackbook/html/file-commands-copymove.html
--rw-r--r--  1 root root      4959 May 12  2005 ./slackbook/html/file-commands-creation.html
--rw-r--r--  1 root root      6218 May 12  2005 ./slackbook/html/file-commands-deletion.html
--rw-r--r--  1 root root      4034 Apr 25  2005 ./slackbook/html/file-commands-link.html
--rw-r--r--  1 root root      5596 May 12  2005 ./slackbook/html/file-commands-output.html
--rw-r--r--  1 root root      5798 May 12  2005 ./slackbook/html/file-commands-pagers.html
--rw-r--r--  1 root root     10160 May 12  2005 ./slackbook/html/file-commands.html
--rw-r--r--  1 root root      4506 Apr 25  2005 ./slackbook/html/filesystem-structure-links.html
--rw-r--r--  1 root root      8053 May 12  2005 ./slackbook/html/filesystem-structure-mounting.html
--rw-r--r--  1 root root      3139 Apr 15  2005 ./slackbook/html/filesystem-structure-nfs.html
--rw-r--r--  1 root root     10810 May 12  2005 ./slackbook/html/filesystem-structure-permissions.html
--rw-r--r--  1 root root      6249 May  5  2005 ./slackbook/html/filesystem-structure.html
--rw-r--r--  1 root root     18013 May  5  2005 ./slackbook/html/glossary.html
--rw-r--r--  1 root root     21544 May 12  2005 ./slackbook/html/gpl.html
--rw-r--r--  1 root root      9377 Jun 20  2006 ./slackbook/html/help-online.html
--rw-r--r--  1 root root     10039 May 12  2005 ./slackbook/html/help.html
-drwxr-xr-x  3 root root      4096 Sep 25  2006 ./slackbook/html/imagelib
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/imagelib/admon
--rw-r--r--  1 root root       338 Apr 24  2005 ./slackbook/html/imagelib/admon/note.png
--rw-r--r--  1 root root      1090 Apr 24  2005 ./slackbook/html/imagelib/admon/warning.png
--rw-r--r--  1 root root     27647 May 12  2005 ./slackbook/html/index.html
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/installation
--rw-r--r--  1 root root      9134 Apr 24  2005 ./slackbook/html/installation-partitioning.html
--rw-r--r--  1 root root     13788 May 12  2005 ./slackbook/html/installation-requirements.html
--rw-r--r--  1 root root     17913 May 12  2005 ./slackbook/html/installation-setup.html
--rw-r--r--  1 root root      6196 May 12  2005 ./slackbook/html/installation.html
--rw-r--r--  1 root root      4010 May  1  2005 ./slackbook/html/installation/setup-bootdisk-w.png
--rw-r--r--  1 root root      3856 May  1  2005 ./slackbook/html/installation/setup-font-w.png
--rw-r--r--  1 root root      3916 May  1  2005 ./slackbook/html/installation/setup-hardware-clock-w.png
--rw-r--r--  1 root root      4715 May  1  2005 ./slackbook/html/installation/setup-help-w.png
--rw-r--r--  1 root root      7100 May  1  2005 ./slackbook/html/installation/setup-install-w.png
--rw-r--r--  1 root root      6442 May  1  2005 ./slackbook/html/installation/setup-kernel-w.png
--rw-r--r--  1 root root      4526 May  1  2005 ./slackbook/html/installation/setup-keymap-w.png
--rw-r--r--  1 root root      5824 May  1  2005 ./slackbook/html/installation/setup-lilo-w.png
--rw-r--r--  1 root root      5356 May  1  2005 ./slackbook/html/installation/setup-modem-w.png
--rw-r--r--  1 root root      6516 May  1  2005 ./slackbook/html/installation/setup-mouse-w.png
--rw-r--r--  1 root root      5705 May  1  2005 ./slackbook/html/installation/setup-program-w.png
--rw-r--r--  1 root root      6817 May  1  2005 ./slackbook/html/installation/setup-select-w.png
--rw-r--r--  1 root root      3238 May  1  2005 ./slackbook/html/installation/setup-source-w.png
--rw-r--r--  1 root root      3066 May  1  2005 ./slackbook/html/installation/setup-swap-w.png
--rw-r--r--  1 root root      3153 May  1  2005 ./slackbook/html/installation/setup-target-w.png
--rw-r--r--  1 root root      3593 May  1  2005 ./slackbook/html/installation/setup-timezone-w.png
--rw-r--r--  1 root root      6767 May  1  2005 ./slackbook/html/installation/setup-xwmconfig-w.png
--rw-r--r--  1 root root      6602 May  5  2005 ./slackbook/html/introduction-opensource.html
--rw-r--r--  1 root root      4353 Apr 15  2005 ./slackbook/html/introduction-slackware.html
--rw-r--r--  1 root root      5703 May  5  2005 ./slackbook/html/introduction.html
--rw-r--r--  1 root root      9336 May  7  2005 ./slackbook/html/network-configuration-hardware.html
--rw-r--r--  1 root root     13205 May  7  2005 ./slackbook/html/network-configuration-nfs.html
--rw-r--r--  1 root root      5671 May 12  2005 ./slackbook/html/network-configuration-ppp.html
--rw-r--r--  1 root root     14339 May  7  2005 ./slackbook/html/network-configuration-tcpip.html
--rw-r--r--  1 root root      8762 May 12  2005 ./slackbook/html/network-configuration-wireless.html
--rw-r--r--  1 root root      4503 May  7  2005 ./slackbook/html/network-configuration.html
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/package-management
--rw-r--r--  1 root root      5411 May  5  2005 ./slackbook/html/package-management-making-packages.html
--rw-r--r--  1 root root      4408 May 12  2005 ./slackbook/html/package-management-making-tags-and-tagfiles.html
--rw-r--r--  1 root root     11962 May 12  2005 ./slackbook/html/package-management-package-utilities.html
--rw-r--r--  1 root root      5784 May 10  2005 ./slackbook/html/package-management.html
--rw-r--r--  1 root root      5817 May  1  2005 ./slackbook/html/package-management/pkgtool-view-w.png
--rw-r--r--  1 root root      4784 May  1  2005 ./slackbook/html/package-management/pkgtool-w.png
--rw-r--r--  1 root root      4873 Apr 25  2005 ./slackbook/html/process-control-foregrounding.html
--rw-r--r--  1 root root      6934 May  5  2005 ./slackbook/html/process-control-kill.html
--rw-r--r--  1 root root     11978 May  9  2005 ./slackbook/html/process-control-ps.html
--rw-r--r--  1 root root      7703 Apr 23  2005 ./slackbook/html/process-control-top.html
--rw-r--r--  1 root root      5264 Apr 25  2005 ./slackbook/html/process-control.html
--rw-r--r--  1 root root      5421 May 10  2005 ./slackbook/html/security-current.html
--rw-r--r--  1 root root      9659 May 10  2005 ./slackbook/html/security-host.html
--rw-r--r--  1 root root      7349 May 12  2005 ./slackbook/html/security.html
--rw-r--r--  1 root root      9018 May  5  2005 ./slackbook/html/shell-bash.html
--rw-r--r--  1 root root     12375 May  9  2005 ./slackbook/html/shell-command-line.html
--rw-r--r--  1 root root      6609 May 12  2005 ./slackbook/html/shell-vt.html
--rw-r--r--  1 root root      6764 May 12  2005 ./slackbook/html/shell.html
--rw-r--r--  1 root root      3675 May  3  2005 ./slackbook/html/slackware_logo.png
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/system-configuration
--rw-r--r--  1 root root     14395 May 12  2005 ./slackbook/html/system-configuration-kernel.html
--rw-r--r--  1 root root     21909 May 12  2005 ./slackbook/html/system-configuration.html
--rw-r--r--  1 root root      6421 May  1  2005 ./slackbook/html/system-configuration/make-menuconfig-w.png
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/vi
--rw-r--r--  1 root root      4292 Apr 24  2005 ./slackbook/html/vi-configuration.html
--rw-r--r--  1 root root      6414 May 12  2005 ./slackbook/html/vi-keys.html
--rw-r--r--  1 root root      9546 May 12  2005 ./slackbook/html/vi-modes.html
--rw-r--r--  1 root root      4019 Apr 24  2005 ./slackbook/html/vi-opening-files.html
--rw-r--r--  1 root root      3434 Apr 23  2005 ./slackbook/html/vi-quitting-vi.html
--rw-r--r--  1 root root      3698 Apr 23  2005 ./slackbook/html/vi-saving-files.html
--rw-r--r--  1 root root      7379 May  5  2005 ./slackbook/html/vi.html
--rw-r--r--  1 root root      3515 May  1  2005 ./slackbook/html/vi/vim-splitedit.png
-drwxr-xr-x  2 root root      4096 Sep 25  2006 ./slackbook/html/x-window-system
--rw-r--r--  1 root root      7131 Apr 23  2005 ./slackbook/html/x-window-system-xdm.html
--rw-r--r--  1 root root      5093 May  5  2005 ./slackbook/html/x-window-system-xinitrc.html
--rw-r--r--  1 root root      3027 Apr 23  2005 ./slackbook/html/x-window-system-xorgsetup.html
--rw-r--r--  1 root root      6352 May  5  2005 ./slackbook/html/x-window-system-xwmconfig.html
--rw-r--r--  1 root root      9651 May  9  2005 ./slackbook/html/x-window-system.html
--rw-r--r--  1 root root      4003 May  1  2005 ./slackbook/html/x-window-system/xorgconfig1-w.png
--rw-r--r--  1 root root      6872 May  1  2005 ./slackbook/html/x-window-system/xorgconfig2-w.png
--rw-r--r--  1 root root      3069 May  1  2005 ./slackbook/html/x-window-system/xorgconfig3-w.png
--rw-r--r--  1 root root      5245 May  1  2005 ./slackbook/html/x-window-system/xorgconfig4-w.png
--rw-r--r--  1 root root      6767 May  1  2005 ./slackbook/html/x-window-system/xwmconfig-w.png
--rw-r--r--  1 root root      3839 May  5  2005 ./slackbook/html/zipslack-booting.html
--rw-r--r--  1 root root      4577 May  5  2005 ./slackbook/html/zipslack-getting.html
--rw-r--r--  1 root root      4260 Apr 24  2005 ./slackbook/html/zipslack.html
--rw-r--r--  1 root root   1863038 May 16  2005 ./slackbook/slackbook-2.0.pdf
--rw-r--r--  1 root root   3223923 May 16  2005 ./slackbook/slackbook-2.0.ps
-drwxr-xr-x 17 root root      4096 Apr 25 13:51 ./slackware64
--rw-r--r--  1 root root    213939 Apr 25 13:51 ./slackware64/CHECKSUMS.md5
--rw-r--r--  1 root root       198 Apr 25 13:51 ./slackware64/CHECKSUMS.md5.asc
--rw-r--r--  1 root root    267860 Apr 25 13:47 ./slackware64/FILE_LIST
--rw-r--r--  1 root root   2404327 Apr 25 13:50 ./slackware64/MANIFEST.bz2
-lrwxrwxrwx  1 root root        15 Aug 23  2009 ./slackware64/PACKAGES.TXT -> ../PACKAGES.TXT
-drwxr-xr-x  2 root root     20480 Apr 24 03:37 ./slackware64/a
--rw-r--r--  1 root root       327 Mar 25 18:37 ./slackware64/a/aaa_base-13.37-x86_64-3.txt
--rw-r--r--  1 root root     10552 Mar 25 18:37 ./slackware64/a/aaa_base-13.37-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 25 18:37 ./slackware64/a/aaa_base-13.37-x86_64-3.txz.asc
--rw-r--r--  1 root root       568 Apr 22 17:13 ./slackware64/a/aaa_elflibs-13.37-x86_64-7.txt
--rw-r--r--  1 root root   4230216 Apr 22 17:13 ./slackware64/a/aaa_elflibs-13.37-x86_64-7.txz
--rw-r--r--  1 root root       198 Apr 22 17:13 ./slackware64/a/aaa_elflibs-13.37-x86_64-7.txz.asc
--rw-r--r--  1 root root       505 Mar  7 18:02 ./slackware64/a/aaa_terminfo-5.8-x86_64-1.txt
--rw-r--r--  1 root root     43624 Mar  7 18:02 ./slackware64/a/aaa_terminfo-5.8-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 18:02 ./slackware64/a/aaa_terminfo-5.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       416 Apr 18 18:46 ./slackware64/a/acl-2.2.50-x86_64-1.txt
--rw-r--r--  1 root root    136596 Apr 18 18:46 ./slackware64/a/acl-2.2.50-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 18 18:46 ./slackware64/a/acl-2.2.50-x86_64-1.txz.asc
--rw-r--r--  1 root root       471 Apr 16 04:08 ./slackware64/a/acpid-2.0.9-x86_64-1.txt
--rw-r--r--  1 root root     40356 Apr 16 04:08 ./slackware64/a/acpid-2.0.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 16 04:08 ./slackware64/a/acpid-2.0.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       554 Apr 11 06:20 ./slackware64/a/apmd-3.2.2-x86_64-3.txt
--rw-r--r--  1 root root     54944 Apr 11 06:20 ./slackware64/a/apmd-3.2.2-x86_64-3.txz
--rw-r--r--  1 root root       198 Apr 11 06:20 ./slackware64/a/apmd-3.2.2-x86_64-3.txz.asc
--rw-r--r--  1 root root       608 Apr 18 18:39 ./slackware64/a/attr-2.4.45-x86_64-1.txt
--rw-r--r--  1 root root     72972 Apr 18 18:39 ./slackware64/a/attr-2.4.45-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 18 18:39 ./slackware64/a/attr-2.4.45-x86_64-1.txz.asc
--rw-r--r--  1 root root       510 Mar 10 05:07 ./slackware64/a/bash-4.1.010-x86_64-1.txt
--rw-r--r--  1 root root    966004 Mar 10 05:07 ./slackware64/a/bash-4.1.010-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 10 05:07 ./slackware64/a/bash-4.1.010-x86_64-1.txz.asc
--rw-r--r--  1 root root       227 Sep 21  2008 ./slackware64/a/bin-11.1-x86_64-1.txt
--rw-r--r--  1 root root     44196 Sep 21  2008 ./slackware64/a/bin-11.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 21  2008 ./slackware64/a/bin-11.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       639 Mar 27 22:25 ./slackware64/a/btrfs-progs-20110327-x86_64-1.txt
--rw-r--r--  1 root root    145856 Mar 27 22:25 ./slackware64/a/btrfs-progs-20110327-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 27 22:25 ./slackware64/a/btrfs-progs-20110327-x86_64-1.txz.asc
--rw-r--r--  1 root root       478 Sep 20  2010 ./slackware64/a/bzip2-1.0.6-x86_64-1.txt
--rw-r--r--  1 root root    127592 Sep 20  2010 ./slackware64/a/bzip2-1.0.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Sep 20  2010 ./slackware64/a/bzip2-1.0.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       525 Apr 14 20:30 ./slackware64/a/coreutils-8.11-x86_64-1.txt
--rw-r--r--  1 root root   2200132 Apr 14 20:30 ./slackware64/a/coreutils-8.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 14 20:30 ./slackware64/a/coreutils-8.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       487 Mar 11 04:32 ./slackware64/a/cpio-2.11-x86_64-1.txt
--rw-r--r--  1 root root    182752 Mar 11 04:32 ./slackware64/a/cpio-2.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 11 04:32 ./slackware64/a/cpio-2.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       620 Feb 25 20:06 ./slackware64/a/cpufrequtils-008-x86_64-1.txt
--rw-r--r--  1 root root     35440 Feb 25 20:06 ./slackware64/a/cpufrequtils-008-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 25 20:06 ./slackware64/a/cpufrequtils-008-x86_64-1.txz.asc
--rw-r--r--  1 root root       582 Jan 22 04:19 ./slackware64/a/cryptsetup-1.2.0-x86_64-1.txt
--rw-r--r--  1 root root    117732 Jan 22 04:19 ./slackware64/a/cryptsetup-1.2.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:19 ./slackware64/a/cryptsetup-1.2.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       644 Jan 22 04:23 ./slackware64/a/cups-1.4.6-x86_64-1.txt
--rw-r--r--  1 root root   2094964 Jan 22 04:23 ./slackware64/a/cups-1.4.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:23 ./slackware64/a/cups-1.4.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       280 Jan  7 06:46 ./slackware64/a/cxxlibs-6.0.14-x86_64-1.txt
--rw-r--r--  1 root root    875276 Jan  7 06:46 ./slackware64/a/cxxlibs-6.0.14-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 06:46 ./slackware64/a/cxxlibs-6.0.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       491 Dec 23 23:31 ./slackware64/a/dbus-1.4.1-x86_64-1.txt
--rw-r--r--  1 root root    339312 Dec 23 23:31 ./slackware64/a/dbus-1.4.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 23 23:31 ./slackware64/a/dbus-1.4.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       359 Feb 11  2010 ./slackware64/a/dcron-4.4-x86_64-1.txt
--rw-r--r--  1 root root     32528 Feb 11  2010 ./slackware64/a/dcron-4.4-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 11  2010 ./slackware64/a/dcron-4.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       311 Sep 25  2008 ./slackware64/a/devs-2.3.1-noarch-25.txt
--rw-r--r--  1 root root     98596 Sep 25  2008 ./slackware64/a/devs-2.3.1-noarch-25.txz
--rw-r--r--  1 root root       197 Sep 25  2008 ./slackware64/a/devs-2.3.1-noarch-25.txz.asc
--rw-r--r--  1 root root       513 Apr  4 05:42 ./slackware64/a/dialog-1.1_20100428-x86_64-2.txt
--rw-r--r--  1 root root    131812 Apr  4 05:42 ./slackware64/a/dialog-1.1_20100428-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr  4 05:42 ./slackware64/a/dialog-1.1_20100428-x86_64-2.txz.asc
--rw-r--r--  1 root root       281 Apr  7 23:14 ./slackware64/a/dosfstools-3.0.11-x86_64-2.txt
--rw-r--r--  1 root root     65160 Apr  7 23:14 ./slackware64/a/dosfstools-3.0.11-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr  7 23:14 ./slackware64/a/dosfstools-3.0.11-x86_64-2.txz.asc
--rw-r--r--  1 root root       343 Dec 30 18:21 ./slackware64/a/e2fsprogs-1.41.14-x86_64-1.txt
--rw-r--r--  1 root root    675072 Dec 30 18:21 ./slackware64/a/e2fsprogs-1.41.14-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 30 18:21 ./slackware64/a/e2fsprogs-1.41.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       352 Jul 28  2010 ./slackware64/a/ed-1.4-x86_64-1.txt
--rw-r--r--  1 root root     63580 Jul 28  2010 ./slackware64/a/ed-1.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/ed-1.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       430 Jan 25  2010 ./slackware64/a/eject-2.1.5-x86_64-2.txt
--rw-r--r--  1 root root     34532 Jan 25  2010 ./slackware64/a/eject-2.1.5-x86_64-2.txz
--rw-r--r--  1 root root       197 Jan 25  2010 ./slackware64/a/eject-2.1.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       389 Sep 23  2008 ./slackware64/a/elvis-2.2_0-x86_64-2.txt
--rw-r--r--  1 root root    699236 Sep 23  2008 ./slackware64/a/elvis-2.2_0-x86_64-2.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/a/elvis-2.2_0-x86_64-2.txz.asc
--rw-r--r--  1 root root       203 Feb  5  2010 ./slackware64/a/etc-13.013-x86_64-1.txt
--rw-r--r--  1 root root    207624 Feb  5  2010 ./slackware64/a/etc-13.013-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  5  2010 ./slackware64/a/etc-13.013-x86_64-1.txz.asc
--rw-r--r--  1 root root       225 Jan 30 22:11 ./slackware64/a/file-5.05-x86_64-1.txt
--rw-r--r--  1 root root    214020 Jan 30 22:11 ./slackware64/a/file-5.05-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:11 ./slackware64/a/file-5.05-x86_64-1.txz.asc
--rw-r--r--  1 root root       368 Jun 13  2009 ./slackware64/a/findutils-4.4.2-x86_64-1.txt
--rw-r--r--  1 root root    414500 Jun 13  2009 ./slackware64/a/findutils-4.4.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Jun 13  2009 ./slackware64/a/findutils-4.4.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       271 Oct 23  2008 ./slackware64/a/floppy-5.4-x86_64-3.txt
--rw-r--r--  1 root root    350400 Oct 23  2008 ./slackware64/a/floppy-5.4-x86_64-3.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/a/floppy-5.4-x86_64-3.txz.asc
--rw-r--r--  1 root root       588 May  9  2010 ./slackware64/a/gawk-3.1.8-x86_64-1.txt
--rw-r--r--  1 root root    796264 May  9  2010 ./slackware64/a/gawk-3.1.8-x86_64-1.txz
--rw-r--r--  1 root root       198 May  9  2010 ./slackware64/a/gawk-3.1.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       438 Mar  2 21:35 ./slackware64/a/gdisk-0.6.14-x86_64-1.txt
--rw-r--r--  1 root root    114224 Mar  2 21:35 ./slackware64/a/gdisk-0.6.14-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  2 21:35 ./slackware64/a/gdisk-0.6.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       498 Dec 13  2008 ./slackware64/a/genpower-1.0.5-x86_64-2.txt
--rw-r--r--  1 root root     42648 Dec 13  2008 ./slackware64/a/genpower-1.0.5-x86_64-2.txz
--rw-r--r--  1 root root       197 Dec 13  2008 ./slackware64/a/genpower-1.0.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       279 Nov  6 19:16 ./slackware64/a/gettext-0.18.1.1-x86_64-1.txt
--rw-r--r--  1 root root    113596 Nov  6 19:16 ./slackware64/a/gettext-0.18.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 19:16 ./slackware64/a/gettext-0.18.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       510 Oct  2  2008 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txt
--rw-r--r--  1 root root     64504 Oct  2  2008 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txz.asc
--rw-r--r--  1 root root       323 Mar 24 07:51 ./slackware64/a/glibc-solibs-2.13-x86_64-4.txt
--rw-r--r--  1 root root   2437800 Mar 24 07:51 ./slackware64/a/glibc-solibs-2.13-x86_64-4.txz
--rw-r--r--  1 root root       198 Mar 24 07:51 ./slackware64/a/glibc-solibs-2.13-x86_64-4.txz.asc
--rw-r--r--  1 root root       500 Mar 24 07:50 ./slackware64/a/glibc-zoneinfo-2.13-noarch-4.txt
--rw-r--r--  1 root root    156896 Mar 24 07:50 ./slackware64/a/glibc-zoneinfo-2.13-noarch-4.txz
--rw-r--r--  1 root root       198 Mar 24 07:50 ./slackware64/a/glibc-zoneinfo-2.13-noarch-4.txz.asc
--rw-r--r--  1 root root       511 Oct  2  2008 ./slackware64/a/gpm-1.20.1-x86_64-5.txt
--rw-r--r--  1 root root    190476 Oct  2  2008 ./slackware64/a/gpm-1.20.1-x86_64-5.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/gpm-1.20.1-x86_64-5.txz.asc
--rw-r--r--  1 root root       292 Oct 28 17:29 ./slackware64/a/grep-2.7-x86_64-1.txt
--rw-r--r--  1 root root    242736 Oct 28 17:29 ./slackware64/a/grep-2.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Oct 28 17:29 ./slackware64/a/grep-2.7-x86_64-1.txz.asc
--rw-r--r--  1 root root    127483 Feb  9  2010 ./slackware64/a/gzip-1.4-x86_64-1.tgz
--rw-r--r--  1 root root       197 Feb  9  2010 ./slackware64/a/gzip-1.4-x86_64-1.tgz.asc
--rw-r--r--  1 root root       315 Feb  9  2010 ./slackware64/a/gzip-1.4-x86_64-1.txt
--rw-r--r--  1 root root       348 Jan 26 23:02 ./slackware64/a/hdparm-9.37-x86_64-1.txt
--rw-r--r--  1 root root     63524 Jan 26 23:02 ./slackware64/a/hdparm-9.37-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 26 23:02 ./slackware64/a/hdparm-9.37-x86_64-1.txz.asc
--rw-r--r--  1 root root       466 Aug 24  2009 ./slackware64/a/infozip-6.0-x86_64-1.txt
--rw-r--r--  1 root root    405240 Aug 24  2009 ./slackware64/a/infozip-6.0-x86_64-1.txz
--rw-r--r--  1 root root       197 Aug 24  2009 ./slackware64/a/infozip-6.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       513 May  8  2010 ./slackware64/a/inotify-tools-3.14-x86_64-1.txt
--rw-r--r--  1 root root     43908 May  8  2010 ./slackware64/a/inotify-tools-3.14-x86_64-1.txz
--rw-r--r--  1 root root       198 May  8  2010 ./slackware64/a/inotify-tools-3.14-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/a/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/a/install.end
--rw-r--r--  1 root root       539 Mar 29 19:01 ./slackware64/a/jfsutils-1.1.15-x86_64-1.txt
--rw-r--r--  1 root root    198368 Mar 29 19:01 ./slackware64/a/jfsutils-1.1.15-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 29 19:01 ./slackware64/a/jfsutils-1.1.15-x86_64-1.txz.asc
--rw-r--r--  1 root root       465 Apr 29  2010 ./slackware64/a/kbd-1.15.2-x86_64-1.txt
--rw-r--r--  1 root root   1097948 Apr 29  2010 ./slackware64/a/kbd-1.15.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 29  2010 ./slackware64/a/kbd-1.15.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       344 Apr  9 18:25 ./slackware64/a/kernel-firmware-2.6.37.6-noarch-2.txt
--rw-r--r--  1 root root   1025816 Apr  9 18:25 ./slackware64/a/kernel-firmware-2.6.37.6-noarch-2.txz
--rw-r--r--  1 root root       198 Apr  9 18:25 ./slackware64/a/kernel-firmware-2.6.37.6-noarch-2.txz.asc
--rw-r--r--  1 root root       626 Apr  9 18:25 ./slackware64/a/kernel-generic-2.6.37.6-x86_64-2.txt
--rw-r--r--  1 root root   3241948 Apr  9 18:25 ./slackware64/a/kernel-generic-2.6.37.6-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr  9 18:25 ./slackware64/a/kernel-generic-2.6.37.6-x86_64-2.txz.asc
--rw-r--r--  1 root root       638 Apr 10 03:50 ./slackware64/a/kernel-huge-2.6.37.6-x86_64-2.txt
--rw-r--r--  1 root root   6297952 Apr 10 03:50 ./slackware64/a/kernel-huge-2.6.37.6-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 10 03:50 ./slackware64/a/kernel-huge-2.6.37.6-x86_64-2.txz.asc
--rw-r--r--  1 root root       520 Apr 10 03:43 ./slackware64/a/kernel-modules-2.6.37.6-x86_64-2.txt
--rw-r--r--  1 root root  20648952 Apr 10 03:43 ./slackware64/a/kernel-modules-2.6.37.6-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 10 03:43 ./slackware64/a/kernel-modules-2.6.37.6-x86_64-2.txz.asc
--rw-r--r--  1 root root       386 Apr 14 18:19 ./slackware64/a/less-443-x86_64-1.txt
--rw-r--r--  1 root root    114256 Apr 14 18:19 ./slackware64/a/less-443-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 14 18:19 ./slackware64/a/less-443-x86_64-1.txz.asc
--rw-r--r--  1 root root       152 Oct  2  2008 ./slackware64/a/lha-114i-x86_64-1.txt
--rw-r--r--  1 root root     47640 Oct  2  2008 ./slackware64/a/lha-114i-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/lha-114i-x86_64-1.txz.asc
--rw-r--r--  1 root root       596 Mar  3 20:32 ./slackware64/a/libcgroup-0.37.1-x86_64-1.txt
--rw-r--r--  1 root root     98376 Mar  3 20:32 ./slackware64/a/libcgroup-0.37.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  3 20:32 ./slackware64/a/libcgroup-0.37.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       590 Mar 27 06:53 ./slackware64/a/lilo-22.8-x86_64-16.txt
--rw-r--r--  1 root root    269720 Mar 27 06:53 ./slackware64/a/lilo-22.8-x86_64-16.txz
--rw-r--r--  1 root root       198 Mar 27 06:53 ./slackware64/a/lilo-22.8-x86_64-16.txz.asc
--rw-r--r--  1 root root       533 Feb 12  2010 ./slackware64/a/logrotate-3.7.8-x86_64-1.txt
--rw-r--r--  1 root root     36996 Feb 12  2010 ./slackware64/a/logrotate-3.7.8-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 12  2010 ./slackware64/a/logrotate-3.7.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       448 Apr 17 20:12 ./slackware64/a/lrzip-0.602-x86_64-1.txt
--rw-r--r--  1 root root    140576 Apr 17 20:12 ./slackware64/a/lrzip-0.602-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 17 20:12 ./slackware64/a/lrzip-0.602-x86_64-1.txz.asc
--rw-r--r--  1 root root       557 Feb 16 02:56 ./slackware64/a/lvm2-2.02.84-x86_64-1.txt
--rw-r--r--  1 root root   1321432 Feb 16 02:56 ./slackware64/a/lvm2-2.02.84-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 16 02:56 ./slackware64/a/lvm2-2.02.84-x86_64-1.txz.asc
--rw-r--r--  1 root root      8136 Apr 17 20:16 ./slackware64/a/maketag
--rw-r--r--  1 root root      8136 Apr 17 20:16 ./slackware64/a/maketag.ez
--rw-r--r--  1 root root       587 Sep 27  2010 ./slackware64/a/mcelog-1.0pre3-x86_64-1.txt
--rw-r--r--  1 root root    186948 Sep 27  2010 ./slackware64/a/mcelog-1.0pre3-x86_64-1.txz
--rw-r--r--  1 root root       198 Sep 27  2010 ./slackware64/a/mcelog-1.0pre3-x86_64-1.txz.asc
--rw-r--r--  1 root root       472 Apr  7 03:19 ./slackware64/a/mdadm-3.1.5-x86_64-1.txt
--rw-r--r--  1 root root    222372 Apr  7 03:19 ./slackware64/a/mdadm-3.1.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  7 03:19 ./slackware64/a/mdadm-3.1.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       323 Feb  9 20:29 ./slackware64/a/minicom-2.5-x86_64-1.txt
--rw-r--r--  1 root root    289676 Feb  9 20:29 ./slackware64/a/minicom-2.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  9 20:29 ./slackware64/a/minicom-2.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       529 Apr  5 04:38 ./slackware64/a/mkinitrd-1.4.6-x86_64-11.txt
--rw-r--r--  1 root root    584252 Apr  5 04:38 ./slackware64/a/mkinitrd-1.4.6-x86_64-11.txz
--rw-r--r--  1 root root       198 Apr  5 04:38 ./slackware64/a/mkinitrd-1.4.6-x86_64-11.txz.asc
--rw-r--r--  1 root root       388 Nov 16 22:04 ./slackware64/a/module-init-tools-3.12-x86_64-2.txt
--rw-r--r--  1 root root    398372 Nov 16 22:04 ./slackware64/a/module-init-tools-3.12-x86_64-2.txz
--rw-r--r--  1 root root       198 Nov 16 22:04 ./slackware64/a/module-init-tools-3.12-x86_64-2.txz.asc
--rw-r--r--  1 root root       487 Oct  2  2008 ./slackware64/a/mt-st-0.9b-x86_64-2.txt
--rw-r--r--  1 root root     30000 Oct  2  2008 ./slackware64/a/mt-st-0.9b-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/mt-st-0.9b-x86_64-2.txz.asc
--rw-r--r--  1 root root       400 Jul 28  2010 ./slackware64/a/mtx-1.3.12-x86_64-1.txt
--rw-r--r--  1 root root     64888 Jul 28  2010 ./slackware64/a/mtx-1.3.12-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/mtx-1.3.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       560 Jul 28  2010 ./slackware64/a/ncompress-4.2.4.3-x86_64-1.txt
--rw-r--r--  1 root root     16076 Jul 28  2010 ./slackware64/a/ncompress-4.2.4.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/ncompress-4.2.4.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       546 Jan 30 22:30 ./slackware64/a/ntfs-3g-2011.1.15-x86_64-1.txt
--rw-r--r--  1 root root    282728 Jan 30 22:30 ./slackware64/a/ntfs-3g-2011.1.15-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:30 ./slackware64/a/ntfs-3g-2011.1.15-x86_64-1.txz.asc
--rw-r--r--  1 root root       678 Mar 22 19:19 ./slackware64/a/openssl-solibs-0.9.8r-x86_64-3.txt
--rw-r--r--  1 root root    736652 Mar 22 19:19 ./slackware64/a/openssl-solibs-0.9.8r-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 22 19:19 ./slackware64/a/openssl-solibs-0.9.8r-x86_64-3.txz.asc
--rw-r--r--  1 root root       564 Jul 28  2010 ./slackware64/a/patch-2.6.1-x86_64-1.txt
--rw-r--r--  1 root root     91844 Jul 28  2010 ./slackware64/a/patch-2.6.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/patch-2.6.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       436 Mar 14 03:53 ./slackware64/a/pciutils-3.1.7-x86_64-1.txt
--rw-r--r--  1 root root    246796 Mar 14 03:53 ./slackware64/a/pciutils-3.1.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 14 03:53 ./slackware64/a/pciutils-3.1.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       451 Feb 27 21:41 ./slackware64/a/pcmciautils-017-x86_64-1.txt
--rw-r--r--  1 root root     32108 Feb 27 21:41 ./slackware64/a/pcmciautils-017-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 27 21:41 ./slackware64/a/pcmciautils-017-x86_64-1.txz.asc
--rw-r--r--  1 root root     39275 Apr 22 20:51 ./slackware64/a/pkgtools-13.37-noarch-9.tgz
--rw-r--r--  1 root root       198 Apr 22 20:51 ./slackware64/a/pkgtools-13.37-noarch-9.tgz.asc
--rw-r--r--  1 root root       624 Apr 22 20:51 ./slackware64/a/pkgtools-13.37-noarch-9.txt
--rw-r--r--  1 root root       282 Mar 29 18:39 ./slackware64/a/procps-3.2.8-x86_64-3.txt
--rw-r--r--  1 root root    240532 Mar 29 18:39 ./slackware64/a/procps-3.2.8-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 29 18:39 ./slackware64/a/procps-3.2.8-x86_64-3.txz.asc
--rw-r--r--  1 root root       524 Jun 22  2009 ./slackware64/a/quota-3.17-x86_64-1.txt
--rw-r--r--  1 root root    167344 Jun 22  2009 ./slackware64/a/quota-3.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Jun 22  2009 ./slackware64/a/quota-3.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       476 Mar  4  2009 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txt
--rw-r--r--  1 root root    224836 Mar  4  2009 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar  4  2009 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       398 Aug  7  2010 ./slackware64/a/rpm2tgz-1.2.2-x86_64-1.txt
--rw-r--r--  1 root root      5492 Aug  7  2010 ./slackware64/a/rpm2tgz-1.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  7  2010 ./slackware64/a/rpm2tgz-1.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       467 Nov 16 22:37 ./slackware64/a/sdparm-1.06-x86_64-1.txt
--rw-r--r--  1 root root     96016 Nov 16 22:37 ./slackware64/a/sdparm-1.06-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 16 22:37 ./slackware64/a/sdparm-1.06-x86_64-1.txz.asc
--rw-r--r--  1 root root       408 Dec  6  2009 ./slackware64/a/sed-4.2.1-x86_64-1.txt
--rw-r--r--  1 root root    173168 Dec  6  2009 ./slackware64/a/sed-4.2.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec  6  2009 ./slackware64/a/sed-4.2.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       536 Apr 11 04:22 ./slackware64/a/shadow-4.1.4.3-x86_64-2.txt
--rw-r--r--  1 root root   1220456 Apr 11 04:22 ./slackware64/a/shadow-4.1.4.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 11 04:22 ./slackware64/a/shadow-4.1.4.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       627 Feb  7 19:28 ./slackware64/a/sharutils-4.11-x86_64-1.txt
--rw-r--r--  1 root root    154992 Feb  7 19:28 ./slackware64/a/sharutils-4.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  7 19:28 ./slackware64/a/sharutils-4.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       553 Jul 18  2009 ./slackware64/a/slocate-3.1-x86_64-3.txt
--rw-r--r--  1 root root     28148 Jul 18  2009 ./slackware64/a/slocate-3.1-x86_64-3.txz
--rw-r--r--  1 root root       197 Jul 18  2009 ./slackware64/a/slocate-3.1-x86_64-3.txz.asc
--rw-r--r--  1 root root       710 Jan 27 19:24 ./slackware64/a/smartmontools-5.40-x86_64-1.txt
--rw-r--r--  1 root root    287120 Jan 27 19:24 ./slackware64/a/smartmontools-5.40-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 27 19:24 ./slackware64/a/smartmontools-5.40-x86_64-1.txz.asc
--rw-r--r--  1 root root       285 Oct  2  2008 ./slackware64/a/splitvt-1.6.5-x86_64-1.txt
--rw-r--r--  1 root root     28700 Oct  2  2008 ./slackware64/a/splitvt-1.6.5-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/splitvt-1.6.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       544 Sep 25  2008 ./slackware64/a/sysfsutils-2.1.0-x86_64-1.txt
--rw-r--r--  1 root root     39392 Sep 25  2008 ./slackware64/a/sysfsutils-2.1.0-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 25  2008 ./slackware64/a/sysfsutils-2.1.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       457 Oct 20  2010 ./slackware64/a/sysklogd-1.5-x86_64-1.txt
--rw-r--r--  1 root root     61552 Oct 20  2010 ./slackware64/a/sysklogd-1.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Oct 20  2010 ./slackware64/a/sysklogd-1.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       518 Jan 25  2010 ./slackware64/a/syslinux-3.84-x86_64-2.txt
--rw-r--r--  1 root root    450952 Jan 25  2010 ./slackware64/a/syslinux-3.84-x86_64-2.txz
--rw-r--r--  1 root root       197 Jan 25  2010 ./slackware64/a/syslinux-3.84-x86_64-2.txz.asc
--rw-r--r--  1 root root       513 Sep 25  2008 ./slackware64/a/sysvinit-2.86-x86_64-6.txt
--rw-r--r--  1 root root     60428 Sep 25  2008 ./slackware64/a/sysvinit-2.86-x86_64-6.txz
--rw-r--r--  1 root root       197 Sep 25  2008 ./slackware64/a/sysvinit-2.86-x86_64-6.txz.asc
--rw-r--r--  1 root root       695 Sep 23  2008 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txt
--rw-r--r--  1 root root     30356 Sep 23  2008 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txz.asc
--rw-r--r--  1 root root       379 Apr 23 19:58 ./slackware64/a/sysvinit-scripts-1.2-noarch-43.txt
--rw-r--r--  1 root root     19112 Apr 23 19:58 ./slackware64/a/sysvinit-scripts-1.2-noarch-43.txz
--rw-r--r--  1 root root       198 Apr 23 19:58 ./slackware64/a/sysvinit-scripts-1.2-noarch-43.txz.asc
--rw-r--r--  1 root root      1236 Apr 17 20:16 ./slackware64/a/tagfile
--rw-r--r--  1 root root   1072795 Apr 14 18:24 ./slackware64/a/tar-1.26-x86_64-1.tgz
--rw-r--r--  1 root root       198 Apr 14 18:24 ./slackware64/a/tar-1.26-x86_64-1.tgz.asc
--rw-r--r--  1 root root       380 Apr 14 18:24 ./slackware64/a/tar-1.26-x86_64-1.txt
--rw-r--r--  1 root root       431 Jul 28  2010 ./slackware64/a/tcsh-6.17.00-x86_64-1.txt
--rw-r--r--  1 root root    281248 Jul 28  2010 ./slackware64/a/tcsh-6.17.00-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/tcsh-6.17.00-x86_64-1.txz.asc
--rw-r--r--  1 root root       432 Sep 25  2008 ./slackware64/a/time-1.7-x86_64-1.txt
--rw-r--r--  1 root root     18340 Sep 25  2008 ./slackware64/a/time-1.7-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 25  2008 ./slackware64/a/time-1.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       418 Jul 28  2010 ./slackware64/a/tree-1.5.3-x86_64-1.txt
--rw-r--r--  1 root root     29104 Jul 28  2010 ./slackware64/a/tree-1.5.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/tree-1.5.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       369 Jan  5 07:41 ./slackware64/a/udev-165-x86_64-2.txt
--rw-r--r--  1 root root    305408 Jan  5 07:41 ./slackware64/a/udev-165-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan  5 07:41 ./slackware64/a/udev-165-x86_64-2.txz.asc
--rw-r--r--  1 root root       392 Oct  2  2008 ./slackware64/a/unarj-265-x86_64-1.txt
--rw-r--r--  1 root root     16528 Oct  2  2008 ./slackware64/a/unarj-265-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/a/unarj-265-x86_64-1.txz.asc
--rw-r--r--  1 root root       720 Jan 30 22:02 ./slackware64/a/usb_modeswitch-1.1.6-x86_64-1.txt
--rw-r--r--  1 root root     53628 Jan 30 22:02 ./slackware64/a/usb_modeswitch-1.1.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:02 ./slackware64/a/usb_modeswitch-1.1.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       322 Mar 17 23:50 ./slackware64/a/usbutils-002-x86_64-1.txt
--rw-r--r--  1 root root    184744 Mar 17 23:50 ./slackware64/a/usbutils-002-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 17 23:50 ./slackware64/a/usbutils-002-x86_64-1.txz.asc
--rw-r--r--  1 root root       350 Jul 28  2010 ./slackware64/a/utempter-1.1.5-x86_64-1.txt
--rw-r--r--  1 root root     13912 Jul 28  2010 ./slackware64/a/utempter-1.1.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/utempter-1.1.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       329 Feb 16 06:35 ./slackware64/a/util-linux-2.19-x86_64-1.txt
--rw-r--r--  1 root root   1492964 Feb 16 06:35 ./slackware64/a/util-linux-2.19-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 16 06:35 ./slackware64/a/util-linux-2.19-x86_64-1.txz.asc
--rw-r--r--  1 root root       582 Mar  3  2009 ./slackware64/a/which-2.20-x86_64-1.txt
--rw-r--r--  1 root root     28780 Mar  3  2009 ./slackware64/a/which-2.20-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar  3  2009 ./slackware64/a/which-2.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       495 Mar 22 22:35 ./slackware64/a/xfsprogs-3.1.4-x86_64-1.txt
--rw-r--r--  1 root root    720248 Mar 22 22:35 ./slackware64/a/xfsprogs-3.1.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 22 22:35 ./slackware64/a/xfsprogs-3.1.4-x86_64-1.txz.asc
--rw-r--r--  1 root root    303871 Apr  6 03:47 ./slackware64/a/xz-5.0.2-x86_64-1.tgz
--rw-r--r--  1 root root       198 Apr  6 03:47 ./slackware64/a/xz-5.0.2-x86_64-1.tgz.asc
--rw-r--r--  1 root root       499 Apr  6 03:47 ./slackware64/a/xz-5.0.2-x86_64-1.txt
--rw-r--r--  1 root root       542 Jul 28  2010 ./slackware64/a/zoo-2.10_22-x86_64-1.txt
--rw-r--r--  1 root root     54660 Jul 28  2010 ./slackware64/a/zoo-2.10_22-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/a/zoo-2.10_22-x86_64-1.txz.asc
-drwxr-xr-x  2 root root     12288 Apr 22 18:53 ./slackware64/ap
--rw-r--r--  1 root root       445 Jul 28  2010 ./slackware64/ap/a2ps-4.14-x86_64-5.txt
--rw-r--r--  1 root root    749532 Jul 28  2010 ./slackware64/ap/a2ps-4.14-x86_64-5.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/a2ps-4.14-x86_64-5.txz.asc
--rw-r--r--  1 root root       599 Jul 28  2010 ./slackware64/ap/acct-6.5.4-x86_64-1.txt
--rw-r--r--  1 root root     92664 Jul 28  2010 ./slackware64/ap/acct-6.5.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/acct-6.5.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       625 Feb  9 05:53 ./slackware64/ap/alsa-utils-1.0.24.2-x86_64-1.txt
--rw-r--r--  1 root root    967696 Feb  9 05:53 ./slackware64/ap/alsa-utils-1.0.24.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  9 05:53 ./slackware64/ap/alsa-utils-1.0.24.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       275 Oct  2  2008 ./slackware64/ap/amp-0.7.6-x86_64-1.txt
--rw-r--r--  1 root root     44568 Oct  2  2008 ./slackware64/ap/amp-0.7.6-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  2  2008 ./slackware64/ap/amp-0.7.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       525 Apr 25  2010 ./slackware64/ap/ash-0.4.0-x86_64-2.txt
--rw-r--r--  1 root root     81548 Apr 25  2010 ./slackware64/ap/ash-0.4.0-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 25  2010 ./slackware64/ap/ash-0.4.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       284 Jul 28  2010 ./slackware64/ap/at-3.1.12-x86_64-1.txt
--rw-r--r--  1 root root     41428 Jul 28  2010 ./slackware64/ap/at-3.1.12-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/at-3.1.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       308 Jul 28  2010 ./slackware64/ap/aumix-2.9.1-x86_64-1.txt
--rw-r--r--  1 root root     56316 Jul 28  2010 ./slackware64/ap/aumix-2.9.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/aumix-2.9.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       386 May 23  2009 ./slackware64/ap/bc-1.06.95-x86_64-2.txt
--rw-r--r--  1 root root    102072 May 23  2009 ./slackware64/ap/bc-1.06.95-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/ap/bc-1.06.95-x86_64-2.txz.asc
--rw-r--r--  1 root root       335 May 23  2009 ./slackware64/ap/bpe-2.01.00-x86_64-2.txt
--rw-r--r--  1 root root     47880 May 23  2009 ./slackware64/ap/bpe-2.01.00-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/ap/bpe-2.01.00-x86_64-2.txz.asc
--rw-r--r--  1 root root       595 Nov 26  2008 ./slackware64/ap/cdparanoia-III_10.2-x86_64-1.txt
--rw-r--r--  1 root root     97840 Nov 26  2008 ./slackware64/ap/cdparanoia-III_10.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Nov 26  2008 ./slackware64/ap/cdparanoia-III_10.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       296 Jul 28  2010 ./slackware64/ap/cdrdao-1.2.3-x86_64-1.txt
--rw-r--r--  1 root root    288436 Jul 28  2010 ./slackware64/ap/cdrdao-1.2.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/cdrdao-1.2.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       409 Dec 22 01:54 ./slackware64/ap/cdrtools-3.01a02-x86_64-1.txt
--rw-r--r--  1 root root    844164 Dec 22 01:54 ./slackware64/ap/cdrtools-3.01a02-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 22 01:54 ./slackware64/ap/cdrtools-3.01a02-x86_64-1.txz.asc
--rw-r--r--  1 root root       456 Jul 22  2009 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txt
--rw-r--r--  1 root root    116972 Jul 22  2009 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txz
--rw-r--r--  1 root root       197 Jul 22  2009 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       465 Feb 25 20:34 ./slackware64/ap/ddrescue-1.14-x86_64-1.txt
--rw-r--r--  1 root root     54512 Feb 25 20:34 ./slackware64/ap/ddrescue-1.14-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 25 20:34 ./slackware64/ap/ddrescue-1.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       409 Jul 28  2010 ./slackware64/ap/diffstat-1.53-x86_64-1.txt
--rw-r--r--  1 root root     21836 Jul 28  2010 ./slackware64/ap/diffstat-1.53-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/diffstat-1.53-x86_64-1.txz.asc
--rw-r--r--  1 root root       283 May 10  2010 ./slackware64/ap/diffutils-3.0-x86_64-1.txt
--rw-r--r--  1 root root    313968 May 10  2010 ./slackware64/ap/diffutils-3.0-x86_64-1.txz
--rw-r--r--  1 root root       198 May 10  2010 ./slackware64/ap/diffutils-3.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       348 Jun 13  2009 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txt
--rw-r--r--  1 root root     30804 Jun 13  2009 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Jun 13  2009 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       473 Mar 19 20:29 ./slackware64/ap/dmidecode-2.11-x86_64-1.txt
--rw-r--r--  1 root root     54820 Mar 19 20:29 ./slackware64/ap/dmidecode-2.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 19 20:29 ./slackware64/ap/dmidecode-2.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       360 Apr 14 18:30 ./slackware64/ap/dvd+rw-tools-7.1-x86_64-2.txt
--rw-r--r--  1 root root    110456 Apr 14 18:30 ./slackware64/ap/dvd+rw-tools-7.1-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 14 18:30 ./slackware64/ap/dvd+rw-tools-7.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       461 Jul 28  2010 ./slackware64/ap/enscript-1.6.5.2-x86_64-1.txt
--rw-r--r--  1 root root    370380 Jul 28  2010 ./slackware64/ap/enscript-1.6.5.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/enscript-1.6.5.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       603 Mar  9 20:08 ./slackware64/ap/flac-1.2.1-x86_64-3.txt
--rw-r--r--  1 root root    801156 Mar  9 20:08 ./slackware64/ap/flac-1.2.1-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar  9 20:08 ./slackware64/ap/flac-1.2.1-x86_64-3.txz.asc
--rw-r--r--  1 root root       637 Jan  1 20:05 ./slackware64/ap/foomatic-filters-4.0.6-x86_64-1.txt
--rw-r--r--  1 root root     78652 Jan  1 20:05 ./slackware64/ap/foomatic-filters-4.0.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  1 20:05 ./slackware64/ap/foomatic-filters-4.0.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       549 Dec 28 19:36 ./slackware64/ap/ghostscript-9.00-x86_64-2.txt
--rw-r--r--  1 root root  12144188 Dec 28 19:36 ./slackware64/ap/ghostscript-9.00-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec 28 19:36 ./slackware64/ap/ghostscript-9.00-x86_64-2.txz.asc
--rw-r--r--  1 root root       368 Oct  1  2008 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txt
--rw-r--r--  1 root root   3517036 Oct  1  2008 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txz
--rw-r--r--  1 root root       197 Oct  1  2008 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txz.asc
--rw-r--r--  1 root root       303 Dec 30 19:48 ./slackware64/ap/gphoto2-2.4.10-x86_64-1.txt
--rw-r--r--  1 root root    166688 Dec 30 19:48 ./slackware64/ap/gphoto2-2.4.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 30 19:48 ./slackware64/ap/gphoto2-2.4.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       431 Jan 27 19:39 ./slackware64/ap/groff-1.21-x86_64-1.txt
--rw-r--r--  1 root root   1883028 Jan 27 19:39 ./slackware64/ap/groff-1.21-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 27 19:39 ./slackware64/ap/groff-1.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       549 Nov 27 22:12 ./slackware64/ap/gutenprint-5.2.6-x86_64-1.txt
--rw-r--r--  1 root root   2102464 Nov 27 22:12 ./slackware64/ap/gutenprint-5.2.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 27 22:12 ./slackware64/ap/gutenprint-5.2.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       477 Mar 27 03:22 ./slackware64/ap/hplip-3.11.3a-x86_64-1.txt
--rw-r--r--  1 root root  12530856 Mar 27 03:22 ./slackware64/ap/hplip-3.11.3a-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 27 03:22 ./slackware64/ap/hplip-3.11.3a-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/ap/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/ap/install.end
--rw-r--r--  1 root root       600 Mar 16  2009 ./slackware64/ap/ispell-3.2.06-x86_64-1.txt
--rw-r--r--  1 root root    347684 Mar 16  2009 ./slackware64/ap/ispell-3.2.06-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar 16  2009 ./slackware64/ap/ispell-3.2.06-x86_64-1.txz.asc
--rw-r--r--  1 root root       484 Feb 18  2010 ./slackware64/ap/jed-0.99_19-x86_64-1.txt
--rw-r--r--  1 root root    527460 Feb 18  2010 ./slackware64/ap/jed-0.99_19-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 18  2010 ./slackware64/ap/jed-0.99_19-x86_64-1.txz.asc
--rw-r--r--  1 root root       145 Jul 28  2010 ./slackware64/ap/joe-3.7-x86_64-1.txt
--rw-r--r--  1 root root    318084 Jul 28  2010 ./slackware64/ap/joe-3.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/joe-3.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       337 Jul 28  2010 ./slackware64/ap/jove-4.16.0.73-x86_64-1.txt
--rw-r--r--  1 root root    150256 Jul 28  2010 ./slackware64/ap/jove-4.16.0.73-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/jove-4.16.0.73-x86_64-1.txz.asc
--rw-r--r--  1 root root       540 Jul 28  2010 ./slackware64/ap/ksh93-2010_06_21-x86_64-1.txt
--rw-r--r--  1 root root    764160 Jul 28  2010 ./slackware64/ap/ksh93-2010_06_21-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/ksh93-2010_06_21-x86_64-1.txz.asc
--rw-r--r--  1 root root       316 Dec 12  2008 ./slackware64/ap/libx86-1.1-x86_64-1.txt
--rw-r--r--  1 root root     59200 Dec 12  2008 ./slackware64/ap/libx86-1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 12  2008 ./slackware64/ap/libx86-1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       701 Mar 21 17:59 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-8.txt
--rw-r--r--  1 root root   4686392 Mar 21 17:59 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-8.txz
--rw-r--r--  1 root root       198 Mar 21 17:59 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-8.txz.asc
--rw-r--r--  1 root root       644 May  3  2010 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txt
--rw-r--r--  1 root root    127248 May  3  2010 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       333 Mar 13  2010 ./slackware64/ap/lsof-4.83-x86_64-1.txt
--rw-r--r--  1 root root    277000 Mar 13  2010 ./slackware64/ap/lsof-4.83-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 13  2010 ./slackware64/ap/lsof-4.83-x86_64-1.txz.asc
--rw-r--r--  1 root root       367 Dec 30 18:19 ./slackware64/ap/lsscsi-0.24-x86_64-1.txt
--rw-r--r--  1 root root     31644 Dec 30 18:19 ./slackware64/ap/lsscsi-0.24-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 30 18:19 ./slackware64/ap/lsscsi-0.24-x86_64-1.txz.asc
--rw-r--r--  1 root root       507 Mar 15 22:32 ./slackware64/ap/lxc-0.7.4-x86_64-2.txt
--rw-r--r--  1 root root    128452 Mar 15 22:32 ./slackware64/ap/lxc-0.7.4-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 15 22:32 ./slackware64/ap/lxc-0.7.4-x86_64-2.txz.asc
--rw-r--r--  1 root root       339 Apr  2 18:04 ./slackware64/ap/madplay-0.15.2b-x86_64-3.txt
--rw-r--r--  1 root root     60412 Apr  2 18:04 ./slackware64/ap/madplay-0.15.2b-x86_64-3.txz
--rw-r--r--  1 root root       198 Apr  2 18:04 ./slackware64/ap/madplay-0.15.2b-x86_64-3.txz.asc
--rw-r--r--  1 root root      5564 Feb 26 04:35 ./slackware64/ap/maketag
--rw-r--r--  1 root root      5564 Feb 26 04:35 ./slackware64/ap/maketag.ez
--rw-r--r--  1 root root       447 Mar 27 07:48 ./slackware64/ap/man-1.6g-x86_64-1.txt
--rw-r--r--  1 root root    219556 Mar 27 07:48 ./slackware64/ap/man-1.6g-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 27 07:48 ./slackware64/ap/man-1.6g-x86_64-1.txz.asc
--rw-r--r--  1 root root       490 Dec 15 00:05 ./slackware64/ap/man-pages-3.32-noarch-1.txt
--rw-r--r--  1 root root   2501352 Dec 15 00:05 ./slackware64/ap/man-pages-3.32-noarch-1.txz
--rw-r--r--  1 root root       198 Dec 15 00:05 ./slackware64/ap/man-pages-3.32-noarch-1.txz.asc
--rw-r--r--  1 root root       451 Apr 14 18:04 ./slackware64/ap/mc-4.7.5.2-x86_64-1.txt
--rw-r--r--  1 root root   1466028 Apr 14 18:04 ./slackware64/ap/mc-4.7.5.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 14 18:04 ./slackware64/ap/mc-4.7.5.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       419 Jan 23 01:11 ./slackware64/ap/moc-2.5.0_alpha4-x86_64-1.txt
--rw-r--r--  1 root root    190016 Jan 23 01:11 ./slackware64/ap/moc-2.5.0_alpha4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 23 01:11 ./slackware64/ap/moc-2.5.0_alpha4-x86_64-1.txz.asc
--rw-r--r--  1 root root       378 Jun 25  2009 ./slackware64/ap/most-5.0.0a-x86_64-2.txt
--rw-r--r--  1 root root     45504 Jun 25  2009 ./slackware64/ap/most-5.0.0a-x86_64-2.txz
--rw-r--r--  1 root root       197 Jun 25  2009 ./slackware64/ap/most-5.0.0a-x86_64-2.txz.asc
--rw-r--r--  1 root root       331 Apr 22 17:35 ./slackware64/ap/mpg123-1.13.3-x86_64-1.txt
--rw-r--r--  1 root root    243172 Apr 22 17:35 ./slackware64/ap/mpg123-1.13.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 22 17:35 ./slackware64/ap/mpg123-1.13.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       360 Apr  5 22:02 ./slackware64/ap/mysql-5.1.56-x86_64-1.txt
--rw-r--r--  1 root root   8518712 Apr  5 22:02 ./slackware64/ap/mysql-5.1.56-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 22:02 ./slackware64/ap/mysql-5.1.56-x86_64-1.txz.asc
--rw-r--r--  1 root root       415 Mar  1 18:19 ./slackware64/ap/nano-2.3.0-x86_64-1.txt
--rw-r--r--  1 root root    392196 Mar  1 18:19 ./slackware64/ap/nano-2.3.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  1 18:19 ./slackware64/ap/nano-2.3.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       514 Jun 10  2009 ./slackware64/ap/normalize-0.7.7-x86_64-1.txt
--rw-r--r--  1 root root     60608 Jun 10  2009 ./slackware64/ap/normalize-0.7.7-x86_64-1.txz
--rw-r--r--  1 root root       197 Jun 10  2009 ./slackware64/ap/normalize-0.7.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       604 Oct 23  2008 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txt
--rw-r--r--  1 root root    273544 Oct 23  2008 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       375 Jan 22 04:30 ./slackware64/ap/pm-utils-1.4.1-x86_64-2.txt
--rw-r--r--  1 root root     68804 Jan 22 04:30 ./slackware64/ap/pm-utils-1.4.1-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 22 04:30 ./slackware64/ap/pm-utils-1.4.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       548 Jan  2 23:00 ./slackware64/ap/powertop-1.13-x86_64-1.txt
--rw-r--r--  1 root root     72224 Jan  2 23:00 ./slackware64/ap/powertop-1.13-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  2 23:00 ./slackware64/ap/powertop-1.13-x86_64-1.txz.asc
--rw-r--r--  1 root root       345 Apr 27  2010 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txt
--rw-r--r--  1 root root     52080 Apr 27  2010 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 27  2010 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       372 May 23  2009 ./slackware64/ap/rexima-1.4-x86_64-2.txt
--rw-r--r--  1 root root     16960 May 23  2009 ./slackware64/ap/rexima-1.4-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/ap/rexima-1.4-x86_64-2.txz.asc
--rw-r--r--  1 root root       493 Dec  3 20:05 ./slackware64/ap/rpm-4.8.1-x86_64-1.txt
--rw-r--r--  1 root root    782528 Dec  3 20:05 ./slackware64/ap/rpm-4.8.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec  3 20:05 ./slackware64/ap/rpm-4.8.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       268 Oct 23  2008 ./slackware64/ap/rzip-2.1-x86_64-1.txt
--rw-r--r--  1 root root     20372 Oct 23  2008 ./slackware64/ap/rzip-2.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/ap/rzip-2.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       123 Jul 28  2010 ./slackware64/ap/sc-7.16-x86_64-3.txt
--rw-r--r--  1 root root    195392 Jul 28  2010 ./slackware64/ap/sc-7.16-x86_64-3.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/sc-7.16-x86_64-3.txz.asc
--rw-r--r--  1 root root       654 May 23  2009 ./slackware64/ap/screen-4.0.3-x86_64-2.txt
--rw-r--r--  1 root root    492712 May 23  2009 ./slackware64/ap/screen-4.0.3-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/ap/screen-4.0.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       455 Dec 14  2008 ./slackware64/ap/seejpeg-1.10-x86_64-1.txt
--rw-r--r--  1 root root     53832 Dec 14  2008 ./slackware64/ap/seejpeg-1.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 14  2008 ./slackware64/ap/seejpeg-1.10-x86_64-1.txz.asc
--rw-r--r--  1 root root     57936 Apr  5 05:59 ./slackware64/ap/slackpkg-2.82.0-noarch-5.tgz
--rw-r--r--  1 root root       198 Apr  5 05:59 ./slackware64/ap/slackpkg-2.82.0-noarch-5.tgz.asc
--rw-r--r--  1 root root       441 Apr  5 05:59 ./slackware64/ap/slackpkg-2.82.0-noarch-5.txt
--rw-r--r--  1 root root       295 Apr  2 22:36 ./slackware64/ap/sox-14.3.2-x86_64-1.txt
--rw-r--r--  1 root root    372428 Apr  2 22:36 ./slackware64/ap/sox-14.3.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  2 22:36 ./slackware64/ap/sox-14.3.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       484 Apr  1 02:47 ./slackware64/ap/sqlite-3.7.5-x86_64-1.txt
--rw-r--r--  1 root root    356452 Apr  1 02:47 ./slackware64/ap/sqlite-3.7.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  1 02:47 ./slackware64/ap/sqlite-3.7.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       414 Feb  9 20:55 ./slackware64/ap/sudo-1.7.4p6-x86_64-1.txt
--rw-r--r--  1 root root    170704 Feb  9 20:55 ./slackware64/ap/sudo-1.7.4p6-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  9 20:55 ./slackware64/ap/sudo-1.7.4p6-x86_64-1.txz.asc
--rw-r--r--  1 root root       444 Apr 25  2010 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txt
--rw-r--r--  1 root root    185340 Apr 25  2010 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 25  2010 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       812 Feb 26 04:35 ./slackware64/ap/tagfile
--rw-r--r--  1 root root       616 Jul 28  2010 ./slackware64/ap/texinfo-4.13a-x86_64-4.txt
--rw-r--r--  1 root root    761204 Jul 28  2010 ./slackware64/ap/texinfo-4.13a-x86_64-4.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/texinfo-4.13a-x86_64-4.txz.asc
--rw-r--r--  1 root root       375 Dec 12  2008 ./slackware64/ap/vbetool-1.1-x86_64-1.txt
--rw-r--r--  1 root root     22748 Dec 12  2008 ./slackware64/ap/vbetool-1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 12  2008 ./slackware64/ap/vbetool-1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       385 Apr  4 05:16 ./slackware64/ap/vim-7.3.154-x86_64-1.txt
--rw-r--r--  1 root root   6583868 Apr  4 05:16 ./slackware64/ap/vim-7.3.154-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  4 05:16 ./slackware64/ap/vim-7.3.154-x86_64-1.txz.asc
--rw-r--r--  1 root root       608 Jul 28  2010 ./slackware64/ap/vorbis-tools-1.4.0-x86_64-1.txt
--rw-r--r--  1 root root    176832 Jul 28  2010 ./slackware64/ap/vorbis-tools-1.4.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/vorbis-tools-1.4.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       230 Jul 28  2010 ./slackware64/ap/workbone-2.40-x86_64-4.txt
--rw-r--r--  1 root root     12000 Jul 28  2010 ./slackware64/ap/workbone-2.40-x86_64-4.txz
--rw-r--r--  1 root root       198 Jul 28  2010 ./slackware64/ap/workbone-2.40-x86_64-4.txz.asc
--rw-r--r--  1 root root       525 Feb  9  2010 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txt
--rw-r--r--  1 root root    299376 Feb  9  2010 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  9  2010 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       508 Mar 19 23:51 ./slackware64/ap/zsh-4.3.11-x86_64-1.txt
--rw-r--r--  1 root root   2381880 Mar 19 23:51 ./slackware64/ap/zsh-4.3.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 19 23:51 ./slackware64/ap/zsh-4.3.11-x86_64-1.txz.asc
-drwxr-xr-x  2 root root     12288 Apr 16 04:36 ./slackware64/d
--rw-r--r--  1 root root       631 Nov  6 17:44 ./slackware64/d/autoconf-2.68-noarch-1.txt
--rw-r--r--  1 root root    715476 Nov  6 17:44 ./slackware64/d/autoconf-2.68-noarch-1.txz
--rw-r--r--  1 root root       198 Nov  6 17:44 ./slackware64/d/autoconf-2.68-noarch-1.txz.asc
--rw-r--r--  1 root root       627 Dec 15 01:05 ./slackware64/d/automake-1.11.1-noarch-2.txt
--rw-r--r--  1 root root    572792 Dec 15 01:05 ./slackware64/d/automake-1.11.1-noarch-2.txz
--rw-r--r--  1 root root       198 Dec 15 01:05 ./slackware64/d/automake-1.11.1-noarch-2.txz.asc
--rw-r--r--  1 root root       443 Jan 22 04:47 ./slackware64/d/binutils-2.21.51.0.6-x86_64-1.txt
--rw-r--r--  1 root root   3273712 Jan 22 04:47 ./slackware64/d/binutils-2.21.51.0.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:47 ./slackware64/d/binutils-2.21.51.0.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       471 Dec 15 00:54 ./slackware64/d/bison-2.4.3-x86_64-2.txt
--rw-r--r--  1 root root    434216 Dec 15 00:54 ./slackware64/d/bison-2.4.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec 15 00:54 ./slackware64/d/bison-2.4.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       314 Jan 11 20:15 ./slackware64/d/ccache-3.1.4-x86_64-1.txt
--rw-r--r--  1 root root     75544 Jan 11 20:15 ./slackware64/d/ccache-3.1.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 11 20:15 ./slackware64/d/ccache-3.1.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       665 Jul 20  2010 ./slackware64/d/clisp-2.49-x86_64-1.txt
--rw-r--r--  1 root root   2806928 Jul 20  2010 ./slackware64/d/clisp-2.49-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 20  2010 ./slackware64/d/clisp-2.49-x86_64-1.txz.asc
--rw-r--r--  1 root root       397 Mar 17 23:07 ./slackware64/d/cmake-2.8.4-x86_64-1.txt
--rw-r--r--  1 root root   4812380 Mar 17 23:07 ./slackware64/d/cmake-2.8.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 17 23:07 ./slackware64/d/cmake-2.8.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       350 May  3  2010 ./slackware64/d/cscope-15.7a-x86_64-1.txt
--rw-r--r--  1 root root     98548 May  3  2010 ./slackware64/d/cscope-15.7a-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/d/cscope-15.7a-x86_64-1.txz.asc
--rw-r--r--  1 root root       538 Oct 15  2008 ./slackware64/d/cvs-1.11.23-x86_64-1.txt
--rw-r--r--  1 root root    859048 Oct 15  2008 ./slackware64/d/cvs-1.11.23-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 15  2008 ./slackware64/d/cvs-1.11.23-x86_64-1.txz.asc
--rw-r--r--  1 root root       412 May 23  2009 ./slackware64/d/dev86-0.16.17-x86_64-2.txt
--rw-r--r--  1 root root    287864 May 23  2009 ./slackware64/d/dev86-0.16.17-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/d/dev86-0.16.17-x86_64-2.txz.asc
--rw-r--r--  1 root root       483 Nov  4  2008 ./slackware64/d/distcc-2.18.3-x86_64-2.txt
--rw-r--r--  1 root root    116144 Nov  4  2008 ./slackware64/d/distcc-2.18.3-x86_64-2.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/d/distcc-2.18.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       511 Jan 11 20:48 ./slackware64/d/doxygen-1.7.3-x86_64-1.txt
--rw-r--r--  1 root root   3012292 Jan 11 20:48 ./slackware64/d/doxygen-1.7.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 11 20:48 ./slackware64/d/doxygen-1.7.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       331 Oct 22  2008 ./slackware64/d/flex-2.5.35-x86_64-1.txt
--rw-r--r--  1 root root    270228 Oct 22  2008 ./slackware64/d/flex-2.5.35-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 22  2008 ./slackware64/d/flex-2.5.35-x86_64-1.txz.asc
--rw-r--r--  1 root root       302 Feb  8 03:04 ./slackware64/d/gcc-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root  11372548 Feb  8 03:04 ./slackware64/d/gcc-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:04 ./slackware64/d/gcc-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       295 Feb  8 03:04 ./slackware64/d/gcc-g++-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root   5059648 Feb  8 03:04 ./slackware64/d/gcc-g++-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:04 ./slackware64/d/gcc-g++-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       768 Feb  8 03:04 ./slackware64/d/gcc-gfortran-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root   4189956 Feb  8 03:04 ./slackware64/d/gcc-gfortran-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:04 ./slackware64/d/gcc-gfortran-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       384 Feb  8 03:05 ./slackware64/d/gcc-gnat-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root  10171112 Feb  8 03:05 ./slackware64/d/gcc-gnat-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:05 ./slackware64/d/gcc-gnat-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       358 Feb  8 03:06 ./slackware64/d/gcc-java-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root  24823480 Feb  8 03:06 ./slackware64/d/gcc-java-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:06 ./slackware64/d/gcc-java-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       503 Feb  8 03:06 ./slackware64/d/gcc-objc-4.5.2-x86_64-2.txt
--rw-r--r--  1 root root   3561240 Feb  8 03:06 ./slackware64/d/gcc-objc-4.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 03:06 ./slackware64/d/gcc-objc-4.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       757 Apr  7 23:38 ./slackware64/d/gdb-7.2-x86_64-2.txt
--rw-r--r--  1 root root   2361264 Apr  7 23:38 ./slackware64/d/gdb-7.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr  7 23:38 ./slackware64/d/gdb-7.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       629 Nov  6 19:18 ./slackware64/d/gettext-tools-0.18.1.1-x86_64-1.txt
--rw-r--r--  1 root root   2474296 Nov  6 19:18 ./slackware64/d/gettext-tools-0.18.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 19:18 ./slackware64/d/gettext-tools-0.18.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       397 Apr 14 17:58 ./slackware64/d/git-1.7.4.4-x86_64-1.txt
--rw-r--r--  1 root root   2730228 Apr 14 17:58 ./slackware64/d/git-1.7.4.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 14 17:58 ./slackware64/d/git-1.7.4.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       562 Jul 29  2010 ./slackware64/d/gperf-3.0.4-x86_64-1.txt
--rw-r--r--  1 root root     98760 Jul 29  2010 ./slackware64/d/gperf-3.0.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 29  2010 ./slackware64/d/gperf-3.0.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       438 Jan 11 19:10 ./slackware64/d/guile-1.8.8-x86_64-1.txt
--rw-r--r--  1 root root   1547052 Jan 11 19:10 ./slackware64/d/guile-1.8.8-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 11 19:10 ./slackware64/d/guile-1.8.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       432 Mar  4  2009 ./slackware64/d/indent-2.2.10-x86_64-1.txt
--rw-r--r--  1 root root    122708 Mar  4  2009 ./slackware64/d/indent-2.2.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar  4  2009 ./slackware64/d/indent-2.2.10-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/d/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/d/install.end
--rw-r--r--  1 root root       233 Jan 11 19:15 ./slackware64/d/intltool-0.41.1-x86_64-1.txt
--rw-r--r--  1 root root     44448 Jan 11 19:15 ./slackware64/d/intltool-0.41.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 11 19:15 ./slackware64/d/intltool-0.41.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       332 Apr  9 18:20 ./slackware64/d/kernel-headers-2.6.37.6-x86-2.txt
--rw-r--r--  1 root root    558888 Apr  9 18:20 ./slackware64/d/kernel-headers-2.6.37.6-x86-2.txz
--rw-r--r--  1 root root       198 Apr  9 18:20 ./slackware64/d/kernel-headers-2.6.37.6-x86-2.txz.asc
--rw-r--r--  1 root root       500 Nov  6 18:40 ./slackware64/d/libtool-2.4-x86_64-1.txt
--rw-r--r--  1 root root    412188 Nov  6 18:40 ./slackware64/d/libtool-2.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 18:40 ./slackware64/d/libtool-2.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       475 Mar  7 19:22 ./slackware64/d/m4-1.4.16-x86_64-1.txt
--rw-r--r--  1 root root    219832 Mar  7 19:22 ./slackware64/d/m4-1.4.16-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 19:22 ./slackware64/d/m4-1.4.16-x86_64-1.txz.asc
--rw-r--r--  1 root root       468 Aug 30  2010 ./slackware64/d/make-3.82-x86_64-2.txt
--rw-r--r--  1 root root    406704 Aug 30  2010 ./slackware64/d/make-3.82-x86_64-2.txz
--rw-r--r--  1 root root       198 Aug 30  2010 ./slackware64/d/make-3.82-x86_64-2.txz.asc
--rw-r--r--  1 root root      3717 Jan 11 21:07 ./slackware64/d/maketag
--rw-r--r--  1 root root      3717 Jan 11 21:07 ./slackware64/d/maketag.ez
--rw-r--r--  1 root root       664 Apr  4 03:00 ./slackware64/d/mercurial-1.8.2-x86_64-1.txt
--rw-r--r--  1 root root   1434792 Apr  4 03:00 ./slackware64/d/mercurial-1.8.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  4 03:00 ./slackware64/d/mercurial-1.8.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       310 Jan 11 19:19 ./slackware64/d/nasm-2.09.04-x86_64-1.txt
--rw-r--r--  1 root root    371656 Jan 11 19:19 ./slackware64/d/nasm-2.09.04-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 11 19:19 ./slackware64/d/nasm-2.09.04-x86_64-1.txz.asc
--rw-r--r--  1 root root       506 Jan 22 04:51 ./slackware64/d/oprofile-0.9.6-x86_64-5.txt
--rw-r--r--  1 root root    766372 Jan 22 04:51 ./slackware64/d/oprofile-0.9.6-x86_64-5.txz
--rw-r--r--  1 root root       198 Jan 22 04:51 ./slackware64/d/oprofile-0.9.6-x86_64-5.txz.asc
--rw-r--r--  1 root root       546 Nov  4  2008 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txt
--rw-r--r--  1 root root    314736 Nov  4  2008 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txz.asc
--rw-r--r--  1 root root       516 Jan 26 18:55 ./slackware64/d/perl-5.12.3-x86_64-1.txt
--rw-r--r--  1 root root  14849956 Jan 26 18:55 ./slackware64/d/perl-5.12.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 26 18:55 ./slackware64/d/perl-5.12.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       446 Jul 29  2010 ./slackware64/d/pkg-config-0.25-x86_64-1.txt
--rw-r--r--  1 root root     66148 Jul 29  2010 ./slackware64/d/pkg-config-0.25-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 29  2010 ./slackware64/d/pkg-config-0.25-x86_64-1.txz.asc
--rw-r--r--  1 root root       339 Sep 21  2008 ./slackware64/d/pmake-1.111-x86_64-3.txt
--rw-r--r--  1 root root     82500 Sep 21  2008 ./slackware64/d/pmake-1.111-x86_64-3.txz
--rw-r--r--  1 root root       197 Sep 21  2008 ./slackware64/d/pmake-1.111-x86_64-3.txz.asc
--rw-r--r--  1 root root       438 Nov 27 23:29 ./slackware64/d/python-2.6.6-x86_64-1.txt
--rw-r--r--  1 root root  12633760 Nov 27 23:29 ./slackware64/d/python-2.6.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 27 23:29 ./slackware64/d/python-2.6.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       322 Oct 15  2008 ./slackware64/d/rcs-5.7-x86_64-2.txt
--rw-r--r--  1 root root    151448 Oct 15  2008 ./slackware64/d/rcs-5.7-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 15  2008 ./slackware64/d/rcs-5.7-x86_64-2.txz.asc
--rw-r--r--  1 root root       410 Mar  6 21:29 ./slackware64/d/ruby-1.9.1_p431-x86_64-1.txt
--rw-r--r--  1 root root   3380460 Mar  6 21:29 ./slackware64/d/ruby-1.9.1_p431-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  6 21:29 ./slackware64/d/ruby-1.9.1_p431-x86_64-1.txz.asc
--rw-r--r--  1 root root       464 Nov 10 17:33 ./slackware64/d/slacktrack-2.08-x86_64-1.txt
--rw-r--r--  1 root root     94744 Nov 10 17:33 ./slackware64/d/slacktrack-2.08-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 10 17:33 ./slackware64/d/slacktrack-2.08-x86_64-1.txz.asc
--rw-r--r--  1 root root       550 Jul 29  2010 ./slackware64/d/strace-4.5.20-x86_64-1.txt
--rw-r--r--  1 root root    102968 Jul 29  2010 ./slackware64/d/strace-4.5.20-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 29  2010 ./slackware64/d/strace-4.5.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       597 Mar  9 21:00 ./slackware64/d/subversion-1.6.16-x86_64-1.txt
--rw-r--r--  1 root root   3383116 Mar  9 21:00 ./slackware64/d/subversion-1.6.16-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 21:00 ./slackware64/d/subversion-1.6.16-x86_64-1.txz.asc
--rw-r--r--  1 root root       561 Jan 26 19:21 ./slackware64/d/swig-1.3.38-x86_64-2.txt
--rw-r--r--  1 root root   2005440 Jan 26 19:21 ./slackware64/d/swig-1.3.38-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 26 19:21 ./slackware64/d/swig-1.3.38-x86_64-2.txz.asc
--rw-r--r--  1 root root       507 Jan 11 21:07 ./slackware64/d/tagfile
--rw-r--r--  1 root root       592 Aug 31  2010 ./slackware64/d/yasm-1.1.0-x86_64-1.txt
--rw-r--r--  1 root root    530020 Aug 31  2010 ./slackware64/d/yasm-1.1.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 31  2010 ./slackware64/d/yasm-1.1.0-x86_64-1.txz.asc
-drwxr-xr-x  2 root root      4096 Mar 12 21:22 ./slackware64/e
--rw-r--r--  1 root root       471 Mar 12 19:39 ./slackware64/e/emacs-23.3-x86_64-1.txt
--rw-r--r--  1 root root  35063524 Mar 12 19:39 ./slackware64/e/emacs-23.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 12 19:39 ./slackware64/e/emacs-23.3-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/e/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/e/install.end
--rw-r--r--  1 root root       953 Mar 12 20:23 ./slackware64/e/maketag
--rw-r--r--  1 root root       953 Mar 12 20:23 ./slackware64/e/maketag.ez
--rw-r--r--  1 root root        10 Mar 12 20:23 ./slackware64/e/tagfile
-drwxr-xr-x  2 root root      4096 Mar 19 04:51 ./slackware64/f
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/f/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/f/install.end
--rw-r--r--  1 root root       502 Mar  1  2006 ./slackware64/f/linux-faqs-20060228-noarch-1.txt
--rw-r--r--  1 root root    287176 Mar  1  2006 ./slackware64/f/linux-faqs-20060228-noarch-1.txz
--rw-r--r--  1 root root       197 Mar  1  2006 ./slackware64/f/linux-faqs-20060228-noarch-1.txz.asc
--rw-r--r--  1 root root       341 Mar 19 04:35 ./slackware64/f/linux-howtos-20110210-noarch-1.txt
--rw-r--r--  1 root root   6560668 Mar 19 04:35 ./slackware64/f/linux-howtos-20110210-noarch-1.txz
--rw-r--r--  1 root root       198 Mar 19 04:35 ./slackware64/f/linux-howtos-20110210-noarch-1.txz.asc
--rw-r--r--  1 root root      1064 Mar  1  2010 ./slackware64/f/maketag
--rw-r--r--  1 root root      1064 Mar  1  2010 ./slackware64/f/maketag.ez
--rw-r--r--  1 root root        32 Mar  1  2010 ./slackware64/f/tagfile
-drwxr-xr-x  2 root root      4096 Apr 13 03:25 ./slackware64/k
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/k/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/k/install.end
--rw-r--r--  1 root root       482 Apr 12 04:02 ./slackware64/k/kernel-source-2.6.37.6-noarch-2.txt
--rw-r--r--  1 root root  64338348 Apr 12 04:02 ./slackware64/k/kernel-source-2.6.37.6-noarch-2.txz
--rw-r--r--  1 root root       198 Apr 12 04:02 ./slackware64/k/kernel-source-2.6.37.6-noarch-2.txz.asc
--rw-r--r--  1 root root      1161 Apr  7 22:22 ./slackware64/k/maketag
--rw-r--r--  1 root root      1161 Apr  7 22:22 ./slackware64/k/maketag.ez
--rw-r--r--  1 root root        18 Apr  7 22:22 ./slackware64/k/tagfile
-drwxr-xr-x  2 root root     12288 Apr  6 06:00 ./slackware64/kde
--rw-r--r--  1 root root       322 Jan 15 20:04 ./slackware64/kde/amarok-2.4.0-x86_64-1.txt
--rw-r--r--  1 root root  13190380 Jan 15 20:04 ./slackware64/kde/amarok-2.4.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 15 20:04 ./slackware64/kde/amarok-2.4.0-x86_64-1.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/kde/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/kde/install.end
--rw-r--r--  1 root root       382 Jan 26 05:19 ./slackware64/kde/k3b-2.0.2-x86_64-2.txt
--rw-r--r--  1 root root   8749640 Jan 26 05:19 ./slackware64/kde/k3b-2.0.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 26 05:19 ./slackware64/kde/k3b-2.0.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       295 Jan  7 20:18 ./slackware64/kde/kaudiocreator-r1212483-x86_64-1.txt
--rw-r--r--  1 root root    125700 Jan  7 20:18 ./slackware64/kde/kaudiocreator-r1212483-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 20:18 ./slackware64/kde/kaudiocreator-r1212483-x86_64-1.txz.asc
--rw-r--r--  1 root root       414 Jan  7 18:24 ./slackware64/kde/kdeaccessibility-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   4010380 Jan  7 18:24 ./slackware64/kde/kdeaccessibility-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:24 ./slackware64/kde/kdeaccessibility-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       182 Mar 13 21:45 ./slackware64/kde/kdeadmin-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root   1241352 Mar 13 21:45 ./slackware64/kde/kdeadmin-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 13 21:45 ./slackware64/kde/kdeadmin-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       233 Feb  9 07:10 ./slackware64/kde/kdeartwork-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root 101478988 Feb  9 07:10 ./slackware64/kde/kdeartwork-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  9 07:10 ./slackware64/kde/kdeartwork-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       238 Apr  4 20:13 ./slackware64/kde/kdebase-4.5.5-x86_64-3.txt
--rw-r--r--  1 root root   2931056 Apr  4 20:13 ./slackware64/kde/kdebase-4.5.5-x86_64-3.txz
--rw-r--r--  1 root root       198 Apr  4 20:13 ./slackware64/kde/kdebase-4.5.5-x86_64-3.txz.asc
--rw-r--r--  1 root root       292 Feb 12 23:19 ./slackware64/kde/kdebase-runtime-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root   6208856 Feb 12 23:19 ./slackware64/kde/kdebase-runtime-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb 12 23:19 ./slackware64/kde/kdebase-runtime-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       348 Jan  7 18:23 ./slackware64/kde/kdebase-workspace-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root  66360996 Jan  7 18:23 ./slackware64/kde/kdebase-workspace-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:23 ./slackware64/kde/kdebase-workspace-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       513 Jan 26 20:19 ./slackware64/kde/kdebindings-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root   9575248 Jan 26 20:19 ./slackware64/kde/kdebindings-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 26 20:19 ./slackware64/kde/kdebindings-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       181 Jan  7 19:11 ./slackware64/kde/kdeedu-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root  52631944 Jan  7 19:11 ./slackware64/kde/kdeedu-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 19:11 ./slackware64/kde/kdeedu-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       187 Jan  7 18:47 ./slackware64/kde/kdegames-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root  50595152 Jan  7 18:47 ./slackware64/kde/kdegames-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:47 ./slackware64/kde/kdegames-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       345 Mar 22 22:23 ./slackware64/kde/kdegraphics-4.5.5-x86_64-3.txt
--rw-r--r--  1 root root   5081896 Mar 22 22:23 ./slackware64/kde/kdegraphics-4.5.5-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 22 22:23 ./slackware64/kde/kdegraphics-4.5.5-x86_64-3.txz.asc
--rw-r--r--  1 root root       191 Mar 28 21:00 ./slackware64/kde/kdelibs-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root  13467272 Mar 28 21:00 ./slackware64/kde/kdelibs-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 28 21:00 ./slackware64/kde/kdelibs-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       513 Jan  7 18:29 ./slackware64/kde/kdemultimedia-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   1612104 Jan  7 18:29 ./slackware64/kde/kdemultimedia-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:29 ./slackware64/kde/kdemultimedia-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       231 Jan  7 18:36 ./slackware64/kde/kdenetwork-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   8495736 Jan  7 18:36 ./slackware64/kde/kdenetwork-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:36 ./slackware64/kde/kdenetwork-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       417 Feb  2 20:06 ./slackware64/kde/kdepim-4.4.10-x86_64-1.txt
--rw-r--r--  1 root root  12106224 Feb  2 20:06 ./slackware64/kde/kdepim-4.4.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  2 20:06 ./slackware64/kde/kdepim-4.4.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       508 Feb  2 20:06 ./slackware64/kde/kdepim-runtime-4.4.10-x86_64-1.txt
--rw-r--r--  1 root root   1128320 Feb  2 20:06 ./slackware64/kde/kdepim-runtime-4.4.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  2 20:06 ./slackware64/kde/kdepim-runtime-4.4.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       274 Jan 21 20:34 ./slackware64/kde/kdepimlibs-4.5.5-x86_64-2.txt
--rw-r--r--  1 root root   2958576 Jan 21 20:34 ./slackware64/kde/kdepimlibs-4.5.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 21 20:34 ./slackware64/kde/kdepimlibs-4.5.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       296 Jan  7 19:15 ./slackware64/kde/kdeplasma-addons-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   2221736 Jan  7 19:15 ./slackware64/kde/kdeplasma-addons-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 19:15 ./slackware64/kde/kdeplasma-addons-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       322 Jan  7 17:40 ./slackware64/kde/kdesdk-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   6728072 Jan  7 17:40 ./slackware64/kde/kdesdk-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 17:40 ./slackware64/kde/kdesdk-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       257 Jan  7 18:47 ./slackware64/kde/kdetoys-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root    410732 Jan  7 18:47 ./slackware64/kde/kdetoys-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:47 ./slackware64/kde/kdetoys-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       330 Jan  7 18:27 ./slackware64/kde/kdeutils-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   4059032 Jan  7 18:27 ./slackware64/kde/kdeutils-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:27 ./slackware64/kde/kdeutils-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       220 Apr  5 23:40 ./slackware64/kde/kdevelop-4.2.2-x86_64-1.txt
--rw-r--r--  1 root root   1983740 Apr  5 23:40 ./slackware64/kde/kdevelop-4.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 23:40 ./slackware64/kde/kdevelop-4.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       247 Apr  5 23:36 ./slackware64/kde/kdevplatform-1.2.2-x86_64-1.txt
--rw-r--r--  1 root root   2572860 Apr  5 23:36 ./slackware64/kde/kdevplatform-1.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 23:36 ./slackware64/kde/kdevplatform-1.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       260 Jan  7 19:13 ./slackware64/kde/kdewebdev-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root   1403568 Jan  7 19:13 ./slackware64/kde/kdewebdev-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 19:13 ./slackware64/kde/kdewebdev-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       493 Mar 23 00:37 ./slackware64/kde/koffice-2.3.3-x86_64-2.txt
--rw-r--r--  1 root root  28846512 Mar 23 00:37 ./slackware64/kde/koffice-2.3.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 23 00:37 ./slackware64/kde/koffice-2.3.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       519 Dec  3 08:52 ./slackware64/kde/konq-plugins-4.4.0-x86_64-2.txt
--rw-r--r--  1 root root   1373716 Dec  3 08:52 ./slackware64/kde/konq-plugins-4.4.0-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec  3 08:52 ./slackware64/kde/konq-plugins-4.4.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       340 May  4  2010 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txt
--rw-r--r--  1 root root    113788 May  4  2010 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       582 Jan  7 19:36 ./slackware64/kde/ktorrent-4.0.5-x86_64-1.txt
--rw-r--r--  1 root root   2357172 Jan  7 19:36 ./slackware64/kde/ktorrent-4.0.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 19:36 ./slackware64/kde/ktorrent-4.0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       479 Jan  7 19:34 ./slackware64/kde/libktorrent-1.0.5_3-x86_64-1.txt
--rw-r--r--  1 root root    527900 Jan  7 19:34 ./slackware64/kde/libktorrent-1.0.5_3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 19:34 ./slackware64/kde/libktorrent-1.0.5_3-x86_64-1.txz.asc
--rw-r--r--  1 root root      3683 Mar 13 20:00 ./slackware64/kde/maketag
--rw-r--r--  1 root root      3683 Mar 13 20:00 ./slackware64/kde/maketag.ez
--rw-r--r--  1 root root       329 Jan  7 18:37 ./slackware64/kde/oxygen-icons-4.5.5-x86_64-1.txt
--rw-r--r--  1 root root  25751472 Jan  7 18:37 ./slackware64/kde/oxygen-icons-4.5.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  7 18:37 ./slackware64/kde/oxygen-icons-4.5.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       225 Mar 31 01:23 ./slackware64/kde/polkit-kde-1-r1145544-x86_64-2.txt
--rw-r--r--  1 root root     29268 Mar 31 01:23 ./slackware64/kde/polkit-kde-1-r1145544-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 31 01:23 ./slackware64/kde/polkit-kde-1-r1145544-x86_64-2.txz.asc
--rw-r--r--  1 root root       442 Mar 21 18:33 ./slackware64/kde/polkit-qt-1-r1145513-x86_64-2.txt
--rw-r--r--  1 root root     67564 Mar 21 18:33 ./slackware64/kde/polkit-qt-1-r1145513-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 21 18:33 ./slackware64/kde/polkit-qt-1-r1145513-x86_64-2.txz.asc
--rw-r--r--  1 root root       207 Dec 29 03:59 ./slackware64/kde/skanlite-0.7-x86_64-1.txt
--rw-r--r--  1 root root   1127044 Dec 29 03:59 ./slackware64/kde/skanlite-0.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 29 03:59 ./slackware64/kde/skanlite-0.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       532 Mar 13 20:00 ./slackware64/kde/tagfile
-drwxr-xr-x  2 root root     20480 Mar  2 03:40 ./slackware64/kdei
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/kdei/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/kdei/install.end
--rw-r--r--  1 root root       188 Jan 23 19:47 ./slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2159924 Jan 23 19:47 ./slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:47 ./slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 19:47 ./slackware64/kdei/kde-l10n-bg-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1051372 Jan 23 19:47 ./slackware64/kdei/kde-l10n-bg-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:47 ./slackware64/kdei/kde-l10n-bg-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 19:49 ./slackware64/kdei/kde-l10n-ca-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   3944628 Jan 23 19:49 ./slackware64/kdei/kde-l10n-ca-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:49 ./slackware64/kdei/kde-l10n-ca-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       266 Jan 23 19:50 ./slackware64/kdei/kde-l10n-ca@valencia-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2039104 Jan 23 19:50 ./slackware64/kdei/kde-l10n-ca@valencia-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:50 ./slackware64/kdei/kde-l10n-ca@valencia-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 19:50 ./slackware64/kdei/kde-l10n-cs-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2413036 Jan 23 19:50 ./slackware64/kdei/kde-l10n-cs-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:50 ./slackware64/kdei/kde-l10n-cs-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 19:52 ./slackware64/kdei/kde-l10n-da-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  13178028 Jan 23 19:52 ./slackware64/kdei/kde-l10n-da-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:52 ./slackware64/kdei/kde-l10n-da-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 19:58 ./slackware64/kdei/kde-l10n-de-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  29217260 Jan 23 19:58 ./slackware64/kdei/kde-l10n-de-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:58 ./slackware64/kdei/kde-l10n-de-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 19:58 ./slackware64/kdei/kde-l10n-el-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2450180 Jan 23 19:58 ./slackware64/kdei/kde-l10n-el-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:58 ./slackware64/kdei/kde-l10n-el-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       230 Jan 23 19:59 ./slackware64/kdei/kde-l10n-en_GB-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2545180 Jan 23 19:59 ./slackware64/kdei/kde-l10n-en_GB-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 19:59 ./slackware64/kdei/kde-l10n-en_GB-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:00 ./slackware64/kdei/kde-l10n-eo-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    807440 Jan 23 20:00 ./slackware64/kdei/kde-l10n-eo-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:00 ./slackware64/kdei/kde-l10n-eo-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:05 ./slackware64/kdei/kde-l10n-es-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  27156480 Jan 23 20:05 ./slackware64/kdei/kde-l10n-es-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:05 ./slackware64/kdei/kde-l10n-es-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:11 ./slackware64/kdei/kde-l10n-et-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   6706832 Jan 23 20:11 ./slackware64/kdei/kde-l10n-et-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:11 ./slackware64/kdei/kde-l10n-et-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:11 ./slackware64/kdei/kde-l10n-eu-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1367560 Jan 23 20:11 ./slackware64/kdei/kde-l10n-eu-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:11 ./slackware64/kdei/kde-l10n-eu-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:11 ./slackware64/kdei/kde-l10n-fi-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1519664 Jan 23 20:11 ./slackware64/kdei/kde-l10n-fi-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:11 ./slackware64/kdei/kde-l10n-fi-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:16 ./slackware64/kdei/kde-l10n-fr-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  20022164 Jan 23 20:16 ./slackware64/kdei/kde-l10n-fr-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:16 ./slackware64/kdei/kde-l10n-fr-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:17 ./slackware64/kdei/kde-l10n-fy-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    577720 Jan 23 20:17 ./slackware64/kdei/kde-l10n-fy-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:17 ./slackware64/kdei/kde-l10n-fy-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 20:17 ./slackware64/kdei/kde-l10n-ga-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2434996 Jan 23 20:17 ./slackware64/kdei/kde-l10n-ga-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:17 ./slackware64/kdei/kde-l10n-ga-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gl-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   3190532 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gl-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gl-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gu-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    444264 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gu-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:19 ./slackware64/kdei/kde-l10n-gu-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:19 ./slackware64/kdei/kde-l10n-he-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1196892 Jan 23 20:19 ./slackware64/kdei/kde-l10n-he-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:19 ./slackware64/kdei/kde-l10n-he-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hi-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    888424 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hi-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hi-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hr-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    840868 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hr-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:20 ./slackware64/kdei/kde-l10n-hr-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:21 ./slackware64/kdei/kde-l10n-hu-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   3431836 Jan 23 20:21 ./slackware64/kdei/kde-l10n-hu-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:21 ./slackware64/kdei/kde-l10n-hu-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       193 Jan 23 20:21 ./slackware64/kdei/kde-l10n-ia-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    350720 Jan 23 20:21 ./slackware64/kdei/kde-l10n-ia-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:21 ./slackware64/kdei/kde-l10n-ia-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       192 Jan 23 20:21 ./slackware64/kdei/kde-l10n-id-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    420476 Jan 23 20:21 ./slackware64/kdei/kde-l10n-id-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:21 ./slackware64/kdei/kde-l10n-id-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:21 ./slackware64/kdei/kde-l10n-is-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    862128 Jan 23 20:21 ./slackware64/kdei/kde-l10n-is-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:21 ./slackware64/kdei/kde-l10n-is-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:27 ./slackware64/kdei/kde-l10n-it-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   9812684 Jan 23 20:27 ./slackware64/kdei/kde-l10n-it-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:27 ./slackware64/kdei/kde-l10n-it-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:27 ./slackware64/kdei/kde-l10n-ja-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1956008 Jan 23 20:27 ./slackware64/kdei/kde-l10n-ja-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:27 ./slackware64/kdei/kde-l10n-ja-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:28 ./slackware64/kdei/kde-l10n-kk-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1207032 Jan 23 20:28 ./slackware64/kdei/kde-l10n-kk-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:28 ./slackware64/kdei/kde-l10n-kk-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 20:28 ./slackware64/kdei/kde-l10n-km-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1526364 Jan 23 20:28 ./slackware64/kdei/kde-l10n-km-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:28 ./slackware64/kdei/kde-l10n-km-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:29 ./slackware64/kdei/kde-l10n-kn-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    313472 Jan 23 20:29 ./slackware64/kdei/kde-l10n-kn-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:29 ./slackware64/kdei/kde-l10n-kn-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:29 ./slackware64/kdei/kde-l10n-ko-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1075612 Jan 23 20:29 ./slackware64/kdei/kde-l10n-ko-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:29 ./slackware64/kdei/kde-l10n-ko-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       192 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lt-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2686108 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lt-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lt-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lv-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1462132 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lv-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:30 ./slackware64/kdei/kde-l10n-lv-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:31 ./slackware64/kdei/kde-l10n-ml-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  19129892 Jan 23 20:31 ./slackware64/kdei/kde-l10n-ml-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:31 ./slackware64/kdei/kde-l10n-ml-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       201 Jan 23 20:31 ./slackware64/kdei/kde-l10n-nb-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2205580 Jan 23 20:31 ./slackware64/kdei/kde-l10n-nb-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:31 ./slackware64/kdei/kde-l10n-nb-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       203 Jan 23 20:32 ./slackware64/kdei/kde-l10n-nds-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   3217604 Jan 23 20:32 ./slackware64/kdei/kde-l10n-nds-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:32 ./slackware64/kdei/kde-l10n-nds-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       187 Jan 23 20:36 ./slackware64/kdei/kde-l10n-nl-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  13154220 Jan 23 20:36 ./slackware64/kdei/kde-l10n-nl-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:36 ./slackware64/kdei/kde-l10n-nl-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       201 Jan 23 20:37 ./slackware64/kdei/kde-l10n-nn-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1732496 Jan 23 20:37 ./slackware64/kdei/kde-l10n-nn-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:37 ./slackware64/kdei/kde-l10n-nn-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:37 ./slackware64/kdei/kde-l10n-pa-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    864996 Jan 23 20:37 ./slackware64/kdei/kde-l10n-pa-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:37 ./slackware64/kdei/kde-l10n-pa-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:40 ./slackware64/kdei/kde-l10n-pl-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   5342064 Jan 23 20:40 ./slackware64/kdei/kde-l10n-pl-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:40 ./slackware64/kdei/kde-l10n-pl-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       192 Jan 23 20:46 ./slackware64/kdei/kde-l10n-pt-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   5468252 Jan 23 20:46 ./slackware64/kdei/kde-l10n-pt-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:46 ./slackware64/kdei/kde-l10n-pt-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       238 Jan 23 20:51 ./slackware64/kdei/kde-l10n-pt_BR-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  18360680 Jan 23 20:51 ./slackware64/kdei/kde-l10n-pt_BR-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:51 ./slackware64/kdei/kde-l10n-pt_BR-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       190 Jan 23 20:52 ./slackware64/kdei/kde-l10n-ro-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2350648 Jan 23 20:52 ./slackware64/kdei/kde-l10n-ro-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:52 ./slackware64/kdei/kde-l10n-ro-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 20:55 ./slackware64/kdei/kde-l10n-ru-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   7068420 Jan 23 20:55 ./slackware64/kdei/kde-l10n-ru-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:55 ./slackware64/kdei/kde-l10n-ru-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       188 Jan 23 20:55 ./slackware64/kdei/kde-l10n-sk-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1226404 Jan 23 20:55 ./slackware64/kdei/kde-l10n-sk-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:55 ./slackware64/kdei/kde-l10n-sk-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 20:56 ./slackware64/kdei/kde-l10n-sl-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2641100 Jan 23 20:56 ./slackware64/kdei/kde-l10n-sl-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 20:56 ./slackware64/kdei/kde-l10n-sl-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 21:00 ./slackware64/kdei/kde-l10n-sr-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   6612752 Jan 23 21:00 ./slackware64/kdei/kde-l10n-sr-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:00 ./slackware64/kdei/kde-l10n-sr-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 21:06 ./slackware64/kdei/kde-l10n-sv-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  16229180 Jan 23 21:06 ./slackware64/kdei/kde-l10n-sv-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:06 ./slackware64/kdei/kde-l10n-sv-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       186 Jan 23 21:06 ./slackware64/kdei/kde-l10n-th-4.5.5-noarch-3.txt
--rw-r--r--  1 root root    906188 Jan 23 21:06 ./slackware64/kdei/kde-l10n-th-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:06 ./slackware64/kdei/kde-l10n-th-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 21:07 ./slackware64/kdei/kde-l10n-tr-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1837692 Jan 23 21:07 ./slackware64/kdei/kde-l10n-tr-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:07 ./slackware64/kdei/kde-l10n-tr-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       191 Jan 23 21:12 ./slackware64/kdei/kde-l10n-uk-4.5.5-noarch-3.txt
--rw-r--r--  1 root root  14053220 Jan 23 21:12 ./slackware64/kdei/kde-l10n-uk-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:12 ./slackware64/kdei/kde-l10n-uk-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       189 Jan 23 21:13 ./slackware64/kdei/kde-l10n-wa-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   1233192 Jan 23 21:13 ./slackware64/kdei/kde-l10n-wa-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:13 ./slackware64/kdei/kde-l10n-wa-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       236 Jan 23 21:13 ./slackware64/kdei/kde-l10n-zh_CN-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   3044072 Jan 23 21:13 ./slackware64/kdei/kde-l10n-zh_CN-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:13 ./slackware64/kdei/kde-l10n-zh_CN-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       225 Jan 23 21:14 ./slackware64/kdei/kde-l10n-zh_TW-4.5.5-noarch-3.txt
--rw-r--r--  1 root root   2013680 Jan 23 21:14 ./slackware64/kdei/kde-l10n-zh_TW-4.5.5-noarch-3.txz
--rw-r--r--  1 root root       198 Jan 23 21:14 ./slackware64/kdei/kde-l10n-zh_TW-4.5.5-noarch-3.txz.asc
--rw-r--r--  1 root root       241 Mar  1 23:54 ./slackware64/kdei/koffice-l10n-ca-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    543628 Mar  1 23:54 ./slackware64/kdei/koffice-l10n-ca-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:54 ./slackware64/kdei/koffice-l10n-ca-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       370 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-ca@valencia-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    278000 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-ca@valencia-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-ca@valencia-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       240 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-da-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    457436 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-da-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:55 ./slackware64/kdei/koffice-l10n-da-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       240 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-de-2.3.2-noarch-1.txt
--rw-r--r--  1 root root   1152132 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-de-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-de-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       239 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-el-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    230368 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-el-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-el-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       282 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-en_GB-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    186268 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-en_GB-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:56 ./slackware64/kdei/koffice-l10n-en_GB-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  1 23:57 ./slackware64/kdei/koffice-l10n-es-2.3.2-noarch-1.txt
--rw-r--r--  1 root root   2809548 Mar  1 23:57 ./slackware64/kdei/koffice-l10n-es-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:57 ./slackware64/kdei/koffice-l10n-es-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       242 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-et-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    651668 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-et-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-et-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       240 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-fr-2.3.2-noarch-1.txt
--rw-r--r--  1 root root   1192600 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-fr-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:58 ./slackware64/kdei/koffice-l10n-fr-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       242 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-gl-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    229432 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-gl-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-gl-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       243 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-hu-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    198788 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-hu-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-hu-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-it-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    546712 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-it-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-it-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       242 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-ja-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    226240 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-ja-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-ja-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       240 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-kk-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    222820 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-kk-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-kk-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       253 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nb-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    275884 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nb-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nb-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       255 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nds-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    275400 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nds-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  1 23:59 ./slackware64/kdei/koffice-l10n-nds-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       239 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-nl-2.3.2-noarch-1.txt
--rw-r--r--  1 root root   1680664 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-nl-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-nl-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       240 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pl-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    201852 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pl-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pl-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       244 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    559296 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       287 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt_BR-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    779688 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt_BR-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:00 ./slackware64/kdei/koffice-l10n-pt_BR-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-ru-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    346240 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-ru-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-ru-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-sv-2.3.2-noarch-1.txt
--rw-r--r--  1 root root   2299760 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-sv-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-sv-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-tr-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    177904 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-tr-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-tr-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       243 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-uk-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    589064 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-uk-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:01 ./slackware64/kdei/koffice-l10n-uk-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       241 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-wa-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    172860 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-wa-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-wa-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       288 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_CN-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    201908 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_CN-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_CN-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root       277 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_TW-2.3.2-noarch-1.txt
--rw-r--r--  1 root root    262876 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_TW-2.3.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  2 00:02 ./slackware64/kdei/koffice-l10n-zh_TW-2.3.2-noarch-1.txz.asc
--rw-r--r--  1 root root      7422 Feb  9 20:02 ./slackware64/kdei/maketag
--rw-r--r--  1 root root      7422 Feb  9 20:02 ./slackware64/kdei/maketag.ez
--rw-r--r--  1 root root      1464 Feb  9 20:02 ./slackware64/kdei/tagfile
-drwxr-xr-x  2 root root     36864 Apr 25 13:47 ./slackware64/l
--rw-r--r--  1 root root       330 Dec 19 03:25 ./slackware64/l/ConsoleKit-0.4.3-x86_64-1.txt
--rw-r--r--  1 root root    131844 Dec 19 03:25 ./slackware64/l/ConsoleKit-0.4.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 19 03:25 ./slackware64/l/ConsoleKit-0.4.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       592 Aug  4  2010 ./slackware64/l/M2Crypto-0.20.2-x86_64-1.txt
--rw-r--r--  1 root root    206896 Aug  4  2010 ./slackware64/l/M2Crypto-0.20.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  4  2010 ./slackware64/l/M2Crypto-0.20.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       276 Nov 29 06:11 ./slackware64/l/PyQt-4.8.1-x86_64-1.txt
--rw-r--r--  1 root root   8342240 Nov 29 06:11 ./slackware64/l/PyQt-4.8.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 29 06:11 ./slackware64/l/PyQt-4.8.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       670 Mar 25 18:13 ./slackware64/l/QScintilla-2.4.5-x86_64-2.txt
--rw-r--r--  1 root root   1181760 Mar 25 18:13 ./slackware64/l/QScintilla-2.4.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 25 18:13 ./slackware64/l/QScintilla-2.4.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       995 Jan 23 07:27 ./slackware64/l/aalib-1.4rc5-x86_64-3.txt
--rw-r--r--  1 root root    157780 Jan 23 07:27 ./slackware64/l/aalib-1.4rc5-x86_64-3.txz
--rw-r--r--  1 root root       198 Jan 23 07:27 ./slackware64/l/aalib-1.4rc5-x86_64-3.txz.asc
--rw-r--r--  1 root root       383 Mar 24 01:58 ./slackware64/l/akonadi-1.4.1-x86_64-3.txt
--rw-r--r--  1 root root    624744 Mar 24 01:58 ./slackware64/l/akonadi-1.4.1-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 24 01:58 ./slackware64/l/akonadi-1.4.1-x86_64-3.txz.asc
--rw-r--r--  1 root root       402 Feb  9 05:47 ./slackware64/l/alsa-lib-1.0.24.1-x86_64-1.txt
--rw-r--r--  1 root root    397656 Feb  9 05:47 ./slackware64/l/alsa-lib-1.0.24.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  9 05:47 ./slackware64/l/alsa-lib-1.0.24.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       503 Oct  3  2008 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txt
--rw-r--r--  1 root root     31944 Oct  3  2008 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       275 Feb 12 19:21 ./slackware64/l/apr-1.4.2-x86_64-2.txt
--rw-r--r--  1 root root    210296 Feb 12 19:21 ./slackware64/l/apr-1.4.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb 12 19:21 ./slackware64/l/apr-1.4.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       483 Feb 10 04:53 ./slackware64/l/apr-util-1.3.10-x86_64-1.txt
--rw-r--r--  1 root root    110780 Feb 10 04:53 ./slackware64/l/apr-util-1.3.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 10 04:53 ./slackware64/l/apr-util-1.3.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       251 Aug  5  2010 ./slackware64/l/aspell-0.60.6-x86_64-1.txt
--rw-r--r--  1 root root    593692 Aug  5  2010 ./slackware64/l/aspell-0.60.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  5  2010 ./slackware64/l/aspell-0.60.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       175 Oct  3  2008 ./slackware64/l/aspell-en-6.0_0-noarch-4.txt
--rw-r--r--  1 root root   1090944 Oct  3  2008 ./slackware64/l/aspell-en-6.0_0-noarch-4.txz
--rw-r--r--  1 root root       197 Oct  3  2008 ./slackware64/l/aspell-en-6.0_0-noarch-4.txz.asc
--rw-r--r--  1 root root       173 Nov  6 05:04 ./slackware64/l/atk-1.32.0-x86_64-1.txt
--rw-r--r--  1 root root    239268 Nov  6 05:04 ./slackware64/l/atk-1.32.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 05:04 ./slackware64/l/atk-1.32.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       373 Jul 13  2010 ./slackware64/l/attica-0.1.4-x86_64-1.txt
--rw-r--r--  1 root root    117588 Jul 13  2010 ./slackware64/l/attica-0.1.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 13  2010 ./slackware64/l/attica-0.1.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       315 Aug  5  2010 ./slackware64/l/audiofile-0.2.7-x86_64-1.txt
--rw-r--r--  1 root root    121548 Aug  5  2010 ./slackware64/l/audiofile-0.2.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  5  2010 ./slackware64/l/audiofile-0.2.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       454 Jan 22  2009 ./slackware64/l/automoc4-0.9.88-x86_64-1.txt
--rw-r--r--  1 root root     25480 Jan 22  2009 ./slackware64/l/automoc4-0.9.88-x86_64-1.txz
--rw-r--r--  1 root root       197 Jan 22  2009 ./slackware64/l/automoc4-0.9.88-x86_64-1.txz.asc
--rw-r--r--  1 root root       517 Nov  8 02:01 ./slackware64/l/babl-0.1.2-x86_64-1.txt
--rw-r--r--  1 root root     68536 Nov  8 02:01 ./slackware64/l/babl-0.1.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  8 02:01 ./slackware64/l/babl-0.1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       433 Nov 28 05:42 ./slackware64/l/boost-1.45.0-x86_64-1.txt
--rw-r--r--  1 root root   5396360 Nov 28 05:42 ./slackware64/l/boost-1.45.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 28 05:42 ./slackware64/l/boost-1.45.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       394 Mar 19 19:05 ./slackware64/l/cairo-1.10.2-x86_64-2.txt
--rw-r--r--  1 root root    544028 Mar 19 19:05 ./slackware64/l/cairo-1.10.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 19 19:05 ./slackware64/l/cairo-1.10.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       472 Mar 29 04:29 ./slackware64/l/chmlib-0.40-x86_64-2.txt
--rw-r--r--  1 root root     33136 Mar 29 04:29 ./slackware64/l/chmlib-0.40-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 29 04:29 ./slackware64/l/chmlib-0.40-x86_64-2.txz.asc
--rw-r--r--  1 root root       279 Jan 20  2009 ./slackware64/l/clucene-0.9.21b-x86_64-1.txt
--rw-r--r--  1 root root    382268 Jan 20  2009 ./slackware64/l/clucene-0.9.21b-x86_64-1.txz
--rw-r--r--  1 root root       197 Jan 20  2009 ./slackware64/l/clucene-0.9.21b-x86_64-1.txz.asc
--rw-r--r--  1 root root       364 Sep 29  2008 ./slackware64/l/db42-4.2.52-x86_64-3.txt
--rw-r--r--  1 root root    380400 Sep 29  2008 ./slackware64/l/db42-4.2.52-x86_64-3.txz
--rw-r--r--  1 root root       197 Sep 29  2008 ./slackware64/l/db42-4.2.52-x86_64-3.txz.asc
--rw-r--r--  1 root root       363 Sep 29  2008 ./slackware64/l/db44-4.4.20-x86_64-2.txt
--rw-r--r--  1 root root    705520 Sep 29  2008 ./slackware64/l/db44-4.4.20-x86_64-2.txz
--rw-r--r--  1 root root       197 Sep 29  2008 ./slackware64/l/db44-4.4.20-x86_64-2.txz.asc
--rw-r--r--  1 root root       222 Nov  6 02:02 ./slackware64/l/dbus-glib-0.88-x86_64-1.txt
--rw-r--r--  1 root root    123876 Nov  6 02:02 ./slackware64/l/dbus-glib-0.88-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 02:02 ./slackware64/l/dbus-glib-0.88-x86_64-1.txz.asc
--rw-r--r--  1 root root       246 Apr 30  2010 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txt
--rw-r--r--  1 root root    106608 Apr 30  2010 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 30  2010 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       655 May 11  2010 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txt
--rw-r--r--  1 root root     45080 May 11  2010 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txz
--rw-r--r--  1 root root       198 May 11  2010 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txz.asc
--rw-r--r--  1 root root       561 Apr  8 00:00 ./slackware64/l/djvulibre-3.5.24-x86_64-1.txt
--rw-r--r--  1 root root    976468 Apr  8 00:00 ./slackware64/l/djvulibre-3.5.24-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  8 00:00 ./slackware64/l/djvulibre-3.5.24-x86_64-1.txz.asc
--rw-r--r--  1 root root       323 May  4  2010 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txt
--rw-r--r--  1 root root     20544 May  4  2010 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       257 Dec 17  2009 ./slackware64/l/eigen2-2.0.10-x86_64-1.txt
--rw-r--r--  1 root root    161064 Dec 17  2009 ./slackware64/l/eigen2-2.0.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 17  2009 ./slackware64/l/eigen2-2.0.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       346 Dec 17  2009 ./slackware64/l/enchant-1.5.0-x86_64-1.txt
--rw-r--r--  1 root root    137616 Dec 17  2009 ./slackware64/l/enchant-1.5.0-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 17  2009 ./slackware64/l/enchant-1.5.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       505 Apr  8  2009 ./slackware64/l/esound-0.2.41-x86_64-1.txt
--rw-r--r--  1 root root     98952 Apr  8  2009 ./slackware64/l/esound-0.2.41-x86_64-1.txz
--rw-r--r--  1 root root       197 Apr  8  2009 ./slackware64/l/esound-0.2.41-x86_64-1.txz.asc
--rw-r--r--  1 root root       257 Feb 14 19:13 ./slackware64/l/exiv2-0.21.1-x86_64-1.txt
--rw-r--r--  1 root root    850988 Feb 14 19:13 ./slackware64/l/exiv2-0.21.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 14 19:13 ./slackware64/l/exiv2-0.21.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       264 Feb  9 22:07 ./slackware64/l/expat-2.0.1-x86_64-2.txt
--rw-r--r--  1 root root    118928 Feb  9 22:07 ./slackware64/l/expat-2.0.1-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  9 22:07 ./slackware64/l/expat-2.0.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       506 Dec 17  2009 ./slackware64/l/fftw-3.2.2-x86_64-1.txt
--rw-r--r--  1 root root   1060684 Dec 17  2009 ./slackware64/l/fftw-3.2.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 17  2009 ./slackware64/l/fftw-3.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       344 Dec 23 23:39 ./slackware64/l/freetype-2.4.4-x86_64-1.txt
--rw-r--r--  1 root root    420516 Dec 23 23:39 ./slackware64/l/freetype-2.4.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 23 23:39 ./slackware64/l/freetype-2.4.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       353 Oct  8  2008 ./slackware64/l/fribidi-0.10.9-x86_64-2.txt
--rw-r--r--  1 root root     45716 Oct  8  2008 ./slackware64/l/fribidi-0.10.9-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct  8  2008 ./slackware64/l/fribidi-0.10.9-x86_64-2.txz.asc
--rw-r--r--  1 root root       391 Jan 30 22:28 ./slackware64/l/fuse-2.8.5-x86_64-1.txt
--rw-r--r--  1 root root    126692 Jan 30 22:28 ./slackware64/l/fuse-2.8.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:28 ./slackware64/l/fuse-2.8.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       297 Mar 16 01:46 ./slackware64/l/gamin-0.1.10-x86_64-3.txt
--rw-r--r--  1 root root    109232 Mar 16 01:46 ./slackware64/l/gamin-0.1.10-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 16 01:46 ./slackware64/l/gamin-0.1.10-x86_64-3.txz.asc
--rw-r--r--  1 root root       469 Feb 18  2010 ./slackware64/l/gd-2.0.35-x86_64-4.txt
--rw-r--r--  1 root root    145516 Feb 18  2010 ./slackware64/l/gd-2.0.35-x86_64-4.txz
--rw-r--r--  1 root root       197 Feb 18  2010 ./slackware64/l/gd-2.0.35-x86_64-4.txz.asc
--rw-r--r--  1 root root       186 Sep 28  2008 ./slackware64/l/gdbm-1.8.3-x86_64-4.txt
--rw-r--r--  1 root root     43824 Sep 28  2008 ./slackware64/l/gdbm-1.8.3-x86_64-4.txz
--rw-r--r--  1 root root       197 Sep 28  2008 ./slackware64/l/gdbm-1.8.3-x86_64-4.txz.asc
--rw-r--r--  1 root root       538 Apr 10 15:05 ./slackware64/l/gdk-pixbuf2-2.23.3-x86_64-1.txt
--rw-r--r--  1 root root    595084 Apr 10 15:05 ./slackware64/l/gdk-pixbuf2-2.23.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 10 15:05 ./slackware64/l/gdk-pixbuf2-2.23.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       405 Nov  8 02:04 ./slackware64/l/gegl-0.1.2-x86_64-1.txt
--rw-r--r--  1 root root    335264 Nov  8 02:04 ./slackware64/l/gegl-0.1.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  8 02:04 ./slackware64/l/gegl-0.1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       320 Feb  6  2010 ./slackware64/l/giflib-4.1.6-x86_64-1.txt
--rw-r--r--  1 root root    171608 Feb  6  2010 ./slackware64/l/giflib-4.1.6-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  6  2010 ./slackware64/l/giflib-4.1.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       302 Sep 28  2008 ./slackware64/l/glib-1.2.10-x86_64-3.txt
--rw-r--r--  1 root root    146248 Sep 28  2008 ./slackware64/l/glib-1.2.10-x86_64-3.txz
--rw-r--r--  1 root root       197 Sep 28  2008 ./slackware64/l/glib-1.2.10-x86_64-3.txz.asc
--rw-r--r--  1 root root       235 Apr 22 17:08 ./slackware64/l/glib2-2.28.6-x86_64-1.txt
--rw-r--r--  1 root root   2858696 Apr 22 17:08 ./slackware64/l/glib2-2.28.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 22 17:08 ./slackware64/l/glib2-2.28.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       389 Mar 24 07:52 ./slackware64/l/glibc-2.13-x86_64-4.txt
--rw-r--r--  1 root root  11753000 Mar 24 07:52 ./slackware64/l/glibc-2.13-x86_64-4.txz
--rw-r--r--  1 root root       198 Mar 24 07:52 ./slackware64/l/glibc-2.13-x86_64-4.txz.asc
--rw-r--r--  1 root root       333 Mar 24 07:51 ./slackware64/l/glibc-i18n-2.13-x86_64-4.txt
--rw-r--r--  1 root root   6644488 Mar 24 07:51 ./slackware64/l/glibc-i18n-2.13-x86_64-4.txz
--rw-r--r--  1 root root       198 Mar 24 07:51 ./slackware64/l/glibc-i18n-2.13-x86_64-4.txz.asc
--rw-r--r--  1 root root       508 Mar 24 07:50 ./slackware64/l/glibc-profile-2.13-x86_64-4.txt
--rw-r--r--  1 root root   1157180 Mar 24 07:50 ./slackware64/l/glibc-profile-2.13-x86_64-4.txz
--rw-r--r--  1 root root       198 Mar 24 07:50 ./slackware64/l/glibc-profile-2.13-x86_64-4.txz.asc
--rw-r--r--  1 root root       297 Feb  3  2010 ./slackware64/l/gmime-2.4.15-x86_64-1.txt
--rw-r--r--  1 root root    245244 Feb  3  2010 ./slackware64/l/gmime-2.4.15-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  3  2010 ./slackware64/l/gmime-2.4.15-x86_64-1.txz.asc
--rw-r--r--  1 root root       579 Dec 16  2008 ./slackware64/l/gmm-3.1-noarch-1.txt
--rw-r--r--  1 root root    110636 Dec 16  2008 ./slackware64/l/gmm-3.1-noarch-1.txz
--rw-r--r--  1 root root       197 Dec 16  2008 ./slackware64/l/gmm-3.1-noarch-1.txz.asc
--rw-r--r--  1 root root       312 Feb 24  2010 ./slackware64/l/gmp-5.0.1-x86_64-1.txt
--rw-r--r--  1 root root    469224 Feb 24  2010 ./slackware64/l/gmp-5.0.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 24  2010 ./slackware64/l/gmp-5.0.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       299 Nov  6 19:02 ./slackware64/l/gnome-icon-theme-2.31.0-x86_64-1.txt
--rw-r--r--  1 root root   8187140 Nov  6 19:02 ./slackware64/l/gnome-icon-theme-2.31.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 19:02 ./slackware64/l/gnome-icon-theme-2.31.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       609 Jan 30 22:22 ./slackware64/l/gst-plugins-base-0.10.32-x86_64-1.txt
--rw-r--r--  1 root root   1136360 Jan 30 22:22 ./slackware64/l/gst-plugins-base-0.10.32-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:22 ./slackware64/l/gst-plugins-base-0.10.32-x86_64-1.txz.asc
--rw-r--r--  1 root root       444 Apr 16 03:22 ./slackware64/l/gst-plugins-good-0.10.28-x86_64-2.txt
--rw-r--r--  1 root root    891052 Apr 16 03:22 ./slackware64/l/gst-plugins-good-0.10.28-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 16 03:22 ./slackware64/l/gst-plugins-good-0.10.28-x86_64-2.txz.asc
--rw-r--r--  1 root root       602 Jan 30 22:20 ./slackware64/l/gstreamer-0.10.32-x86_64-1.txt
--rw-r--r--  1 root root   1149800 Jan 30 22:20 ./slackware64/l/gstreamer-0.10.32-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 22:20 ./slackware64/l/gstreamer-0.10.32-x86_64-1.txz.asc
--rw-r--r--  1 root root       351 Jun  9  2009 ./slackware64/l/gtk+-1.2.10-x86_64-5.txt
--rw-r--r--  1 root root   1046588 Jun  9  2009 ./slackware64/l/gtk+-1.2.10-x86_64-5.txz
--rw-r--r--  1 root root       197 Jun  9  2009 ./slackware64/l/gtk+-1.2.10-x86_64-5.txz.asc
--rw-r--r--  1 root root       335 Apr  2 17:27 ./slackware64/l/gtk+2-2.24.4-x86_64-1.txt
--rw-r--r--  1 root root   6542816 Apr  2 17:27 ./slackware64/l/gtk+2-2.24.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  2 17:27 ./slackware64/l/gtk+2-2.24.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       330 Aug  6  2010 ./slackware64/l/gtkspell-2.0.16-x86_64-1.txt
--rw-r--r--  1 root root     35428 Aug  6  2010 ./slackware64/l/gtkspell-2.0.16-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  6  2010 ./slackware64/l/gtkspell-2.0.16-x86_64-1.txz.asc
--rw-r--r--  1 root root       464 Nov 16 20:51 ./slackware64/l/hal-0.5.14-x86_64-3.txt
--rw-r--r--  1 root root    499528 Nov 16 20:51 ./slackware64/l/hal-0.5.14-x86_64-3.txz
--rw-r--r--  1 root root       198 Nov 16 20:51 ./slackware64/l/hal-0.5.14-x86_64-3.txz.asc
--rw-r--r--  1 root root       297 Feb  9  2010 ./slackware64/l/hal-info-20091130-noarch-1.txt
--rw-r--r--  1 root root     47520 Feb  9  2010 ./slackware64/l/hal-info-20091130-noarch-1.txz
--rw-r--r--  1 root root       197 Feb  9  2010 ./slackware64/l/hal-info-20091130-noarch-1.txz.asc
--rw-r--r--  1 root root       445 Apr 30  2010 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txt
--rw-r--r--  1 root root     11776 Apr 30  2010 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txz
--rw-r--r--  1 root root       198 Apr 30  2010 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txz.asc
--rw-r--r--  1 root root       509 May  4  2010 ./slackware64/l/hunspell-1.2.9-x86_64-1.txt
--rw-r--r--  1 root root    234676 May  4  2010 ./slackware64/l/hunspell-1.2.9-x86_64-1.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/l/hunspell-1.2.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       464 Aug 22  2009 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txt
--rw-r--r--  1 root root     14068 Aug 22  2009 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txz
--rw-r--r--  1 root root       197 Aug 22  2009 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txz.asc
--rw-r--r--  1 root root       371 Aug  9  2010 ./slackware64/l/ilmbase-1.0.2-x86_64-1.txt
--rw-r--r--  1 root root    103212 Aug  9  2010 ./slackware64/l/ilmbase-1.0.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/ilmbase-1.0.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       401 Jun 24  2010 ./slackware64/l/imlib-1.9.15-x86_64-7.txt
--rw-r--r--  1 root root    467148 Jun 24  2010 ./slackware64/l/imlib-1.9.15-x86_64-7.txz
--rw-r--r--  1 root root       198 Jun 24  2010 ./slackware64/l/imlib-1.9.15-x86_64-7.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/l/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/l/install.end
--rw-r--r--  1 root root       392 Mar  7 17:17 ./slackware64/l/iso-codes-3.24.2-noarch-1.txt
--rw-r--r--  1 root root   1719676 Mar  7 17:17 ./slackware64/l/iso-codes-3.24.2-noarch-1.txz
--rw-r--r--  1 root root       198 Mar  7 17:17 ./slackware64/l/iso-codes-3.24.2-noarch-1.txz.asc
--rw-r--r--  1 root root       382 Feb 11  2010 ./slackware64/l/jasper-1.900.1-x86_64-3.txt
--rw-r--r--  1 root root    158076 Feb 11  2010 ./slackware64/l/jasper-1.900.1-x86_64-3.txz
--rw-r--r--  1 root root       197 Feb 11  2010 ./slackware64/l/jasper-1.900.1-x86_64-3.txz.asc
--rw-r--r--  1 root root       510 Apr 24 02:52 ./slackware64/l/jre-6u25-x86_64-1.txt
--rw-r--r--  1 root root  20315920 Apr 24 02:52 ./slackware64/l/jre-6u25-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 24 02:52 ./slackware64/l/jre-6u25-x86_64-1.txz.asc
--rw-r--r--  1 root root       210 Feb 20  2010 ./slackware64/l/lcms-1.19-x86_64-1.txt
--rw-r--r--  1 root root    178476 Feb 20  2010 ./slackware64/l/lcms-1.19-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 20  2010 ./slackware64/l/lcms-1.19-x86_64-1.txz.asc
--rw-r--r--  1 root root       526 Apr 19  2010 ./slackware64/l/lesstif-0.95.2-x86_64-1.txt
--rw-r--r--  1 root root   1397028 Apr 19  2010 ./slackware64/l/lesstif-0.95.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 19  2010 ./slackware64/l/lesstif-0.95.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       505 May 11  2010 ./slackware64/l/libaio-0.3.109-x86_64-1.txt
--rw-r--r--  1 root root     13524 May 11  2010 ./slackware64/l/libaio-0.3.109-x86_64-1.txz
--rw-r--r--  1 root root       198 May 11  2010 ./slackware64/l/libaio-0.3.109-x86_64-1.txz.asc
--rw-r--r--  1 root root       428 Mar  9 20:12 ./slackware64/l/libao-1.1.0-x86_64-1.txt
--rw-r--r--  1 root root     52032 Mar  9 20:12 ./slackware64/l/libao-1.1.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 20:12 ./slackware64/l/libao-1.1.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       415 Dec  3 19:34 ./slackware64/l/libarchive-2.8.4-x86_64-1.txt
--rw-r--r--  1 root root    233372 Dec  3 19:34 ./slackware64/l/libarchive-2.8.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec  3 19:34 ./slackware64/l/libarchive-2.8.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       361 Aug  6  2010 ./slackware64/l/libart_lgpl-2.3.21-x86_64-1.txt
--rw-r--r--  1 root root     76832 Aug  6  2010 ./slackware64/l/libart_lgpl-2.3.21-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  6  2010 ./slackware64/l/libart_lgpl-2.3.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       359 Jun  9  2009 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txt
--rw-r--r--  1 root root    433140 Jun  9  2009 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txz
--rw-r--r--  1 root root       197 Jun  9  2009 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txz.asc
--rw-r--r--  1 root root       380 Feb  8 20:26 ./slackware64/l/libcap-2.20-x86_64-1.txt
--rw-r--r--  1 root root     52272 Feb  8 20:26 ./slackware64/l/libcap-2.20-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  8 20:26 ./slackware64/l/libcap-2.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       328 Aug  6  2010 ./slackware64/l/libcddb-1.3.2-x86_64-1.txt
--rw-r--r--  1 root root     68916 Aug  6  2010 ./slackware64/l/libcddb-1.3.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  6  2010 ./slackware64/l/libcddb-1.3.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       554 Oct  8  2008 ./slackware64/l/libcdio-0.79-x86_64-1.txt
--rw-r--r--  1 root root    280832 Oct  8  2008 ./slackware64/l/libcdio-0.79-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  8  2008 ./slackware64/l/libcdio-0.79-x86_64-1.txz.asc
--rw-r--r--  1 root root       459 Nov 20 17:55 ./slackware64/l/libdbusmenu-qt-0.6.4-x86_64-1.txt
--rw-r--r--  1 root root     70436 Nov 20 17:55 ./slackware64/l/libdbusmenu-qt-0.6.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 20 17:55 ./slackware64/l/libdbusmenu-qt-0.6.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       480 May  4  2010 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txt
--rw-r--r--  1 root root     19936 May  4  2010 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       398 Mar  9  2009 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txt
--rw-r--r--  1 root root     69700 Mar  9  2009 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar  9  2009 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       445 Mar 27 04:25 ./slackware64/l/libelf-0.8.13-x86_64-2.txt
--rw-r--r--  1 root root     73896 Mar 27 04:25 ./slackware64/l/libelf-0.8.13-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 27 04:25 ./slackware64/l/libelf-0.8.13-x86_64-2.txz.asc
--rw-r--r--  1 root root       397 Feb  9 07:02 ./slackware64/l/libexif-0.6.20-x86_64-1.txt
--rw-r--r--  1 root root    306960 Feb  9 07:02 ./slackware64/l/libexif-0.6.20-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  9 07:02 ./slackware64/l/libexif-0.6.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       349 Apr 25  2010 ./slackware64/l/libglade-2.6.4-x86_64-4.txt
--rw-r--r--  1 root root     89064 Apr 25  2010 ./slackware64/l/libglade-2.6.4-x86_64-4.txz
--rw-r--r--  1 root root       198 Apr 25  2010 ./slackware64/l/libglade-2.6.4-x86_64-4.txz.asc
--rw-r--r--  1 root root       293 Dec 30 18:44 ./slackware64/l/libgphoto2-2.4.10.1-x86_64-1.txt
--rw-r--r--  1 root root   1060988 Dec 30 18:44 ./slackware64/l/libgphoto2-2.4.10.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 30 18:44 ./slackware64/l/libgphoto2-2.4.10.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       518 Jan 16 17:25 ./slackware64/l/libgpod-0.8.0-x86_64-2.txt
--rw-r--r--  1 root root    295288 Jan 16 17:25 ./slackware64/l/libgpod-0.8.0-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 16 17:25 ./slackware64/l/libgpod-0.8.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       336 Apr  4 04:25 ./slackware64/l/libgsf-1.14.20-x86_64-1.txt
--rw-r--r--  1 root root    216880 Apr  4 04:25 ./slackware64/l/libgsf-1.14.20-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  4 04:25 ./slackware64/l/libgsf-1.14.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       466 Aug  6  2010 ./slackware64/l/libical-0.44-x86_64-1.txt
--rw-r--r--  1 root root    243272 Aug  6  2010 ./slackware64/l/libical-0.44-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  6  2010 ./slackware64/l/libical-0.44-x86_64-1.txz.asc
--rw-r--r--  1 root root       318 Feb  8 21:00 ./slackware64/l/libid3tag-0.15.1b-x86_64-4.txt
--rw-r--r--  1 root root     36076 Feb  8 21:00 ./slackware64/l/libid3tag-0.15.1b-x86_64-4.txz
--rw-r--r--  1 root root       198 Feb  8 21:00 ./slackware64/l/libid3tag-0.15.1b-x86_64-4.txz.asc
--rw-r--r--  1 root root       338 Aug  7  2010 ./slackware64/l/libidl-0.8.14-x86_64-1.txt
--rw-r--r--  1 root root     88332 Aug  7  2010 ./slackware64/l/libidl-0.8.14-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  7  2010 ./slackware64/l/libidl-0.8.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       336 Aug  7  2010 ./slackware64/l/libidn-1.19-x86_64-1.txt
--rw-r--r--  1 root root    289176 Aug  7  2010 ./slackware64/l/libidn-1.19-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  7  2010 ./slackware64/l/libidn-1.19-x86_64-1.txz.asc
--rw-r--r--  1 root root       380 Apr 30  2009 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txt
--rw-r--r--  1 root root     75032 Apr 30  2009 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txz
--rw-r--r--  1 root root       197 Apr 30  2009 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txz.asc
--rw-r--r--  1 root root       438 May  4  2010 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txt
--rw-r--r--  1 root root    260652 May  4  2010 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txz.asc
--rw-r--r--  1 root root       662 Apr  5  2010 ./slackware64/l/libjpeg-v8a-x86_64-1.txt
--rw-r--r--  1 root root    178868 Apr  5  2010 ./slackware64/l/libjpeg-v8a-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5  2010 ./slackware64/l/libjpeg-v8a-x86_64-1.txz.asc
--rw-r--r--  1 root root       357 Dec 15 01:07 ./slackware64/l/libkarma-0.1.1-x86_64-2.txt
--rw-r--r--  1 root root     57356 Dec 15 01:07 ./slackware64/l/libkarma-0.1.1-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec 15 01:07 ./slackware64/l/libkarma-0.1.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       204 Jan 15 19:20 ./slackware64/l/liblastfm-0.3.3_f0b3239-x86_64-1.txt
--rw-r--r--  1 root root    150120 Jan 15 19:20 ./slackware64/l/liblastfm-0.3.3_f0b3239-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 15 19:20 ./slackware64/l/liblastfm-0.3.3_f0b3239-x86_64-1.txz.asc
--rw-r--r--  1 root root       600 Oct  9  2008 ./slackware64/l/libmad-0.15.1b-x86_64-3.txt
--rw-r--r--  1 root root     70860 Oct  9  2008 ./slackware64/l/libmad-0.15.1b-x86_64-3.txz
--rw-r--r--  1 root root       197 Oct  9  2008 ./slackware64/l/libmad-0.15.1b-x86_64-3.txz.asc
--rw-r--r--  1 root root       552 Apr  5  2009 ./slackware64/l/libmcrypt-2.5.8-x86_64-1.txt
--rw-r--r--  1 root root     81464 Apr  5  2009 ./slackware64/l/libmcrypt-2.5.8-x86_64-1.txz
--rw-r--r--  1 root root       197 Apr  5  2009 ./slackware64/l/libmcrypt-2.5.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       509 Aug  9  2010 ./slackware64/l/libmcs-0.7.2-x86_64-1.txt
--rw-r--r--  1 root root     16208 Aug  9  2010 ./slackware64/l/libmcs-0.7.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/libmcs-0.7.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       484 Feb 14  2010 ./slackware64/l/libmng-1.0.10-x86_64-2.txt
--rw-r--r--  1 root root    211592 Feb 14  2010 ./slackware64/l/libmng-1.0.10-x86_64-2.txz
--rw-r--r--  1 root root       197 Feb 14  2010 ./slackware64/l/libmng-1.0.10-x86_64-2.txz.asc
--rw-r--r--  1 root root       399 Aug  9  2010 ./slackware64/l/libmowgli-0.7.1-x86_64-1.txt
--rw-r--r--  1 root root     32144 Aug  9  2010 ./slackware64/l/libmowgli-0.7.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/libmowgli-0.7.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       376 Feb  8 17:40 ./slackware64/l/libmpc-0.8.2-x86_64-2.txt
--rw-r--r--  1 root root     70112 Feb  8 17:40 ./slackware64/l/libmpc-0.8.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb  8 17:40 ./slackware64/l/libmpc-0.8.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       315 May  4  2010 ./slackware64/l/libmsn-4.1-x86_64-1.txt
--rw-r--r--  1 root root    264324 May  4  2010 ./slackware64/l/libmsn-4.1-x86_64-1.txz
--rw-r--r--  1 root root       198 May  4  2010 ./slackware64/l/libmsn-4.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       602 May  3  2010 ./slackware64/l/libmtp-1.0.1-x86_64-2.txt
--rw-r--r--  1 root root    244572 May  3  2010 ./slackware64/l/libmtp-1.0.1-x86_64-2.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/l/libmtp-1.0.1-x86_64-2.txz.asc
--rw-r--r--  1 root root       540 Aug  9  2010 ./slackware64/l/libnjb-2.2.6-x86_64-5.txt
--rw-r--r--  1 root root    223428 Aug  9  2010 ./slackware64/l/libnjb-2.2.6-x86_64-5.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/libnjb-2.2.6-x86_64-5.txz.asc
--rw-r--r--  1 root root       330 Mar 31  2009 ./slackware64/l/libnl-1.1-x86_64-1.txt
--rw-r--r--  1 root root    119472 Mar 31  2009 ./slackware64/l/libnl-1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Mar 31  2009 ./slackware64/l/libnl-1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       251 Dec 15 01:38 ./slackware64/l/libnotify-0.5.2-x86_64-1.txt
--rw-r--r--  1 root root     44324 Dec 15 01:38 ./slackware64/l/libnotify-0.5.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 15 01:38 ./slackware64/l/libnotify-0.5.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       305 Mar  9 20:13 ./slackware64/l/libogg-1.2.2-x86_64-1.txt
--rw-r--r--  1 root root     72076 Mar  9 20:13 ./slackware64/l/libogg-1.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 20:13 ./slackware64/l/libogg-1.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       580 Mar  9 20:23 ./slackware64/l/liboggz-1.1.1-x86_64-1.txt
--rw-r--r--  1 root root    181980 Mar  9 20:23 ./slackware64/l/liboggz-1.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 20:23 ./slackware64/l/liboggz-1.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       576 Aug  9  2010 ./slackware64/l/liboil-0.3.17-x86_64-1.txt
--rw-r--r--  1 root root    162476 Aug  9  2010 ./slackware64/l/liboil-0.3.17-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/liboil-0.3.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       450 Aug  5  2010 ./slackware64/l/libpcap-1.1.1-x86_64-1.txt
--rw-r--r--  1 root root    239420 Aug  5  2010 ./slackware64/l/libpcap-1.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  5  2010 ./slackware64/l/libpcap-1.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       337 Jan 15 19:55 ./slackware64/l/libplist-1.3-x86_64-1.txt
--rw-r--r--  1 root root     99496 Jan 15 19:55 ./slackware64/l/libplist-1.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 15 19:55 ./slackware64/l/libplist-1.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       492 Jan 30 17:52 ./slackware64/l/libpng-1.4.5-x86_64-1.txt
--rw-r--r--  1 root root    562208 Jan 30 17:52 ./slackware64/l/libpng-1.4.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 30 17:52 ./slackware64/l/libpng-1.4.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       351 Mar 17 22:57 ./slackware64/l/libraw1394-2.0.7-x86_64-1.txt
--rw-r--r--  1 root root     64768 Mar 17 22:57 ./slackware64/l/libraw1394-2.0.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 17 22:57 ./slackware64/l/libraw1394-2.0.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       174 Nov  6 03:55 ./slackware64/l/librsvg-2.32.0-x86_64-1.txt
--rw-r--r--  1 root root    149660 Nov  6 03:55 ./slackware64/l/librsvg-2.32.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 03:55 ./slackware64/l/librsvg-2.32.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       653 Jan 26 05:13 ./slackware64/l/libsamplerate-0.1.7-x86_64-2.txt
--rw-r--r--  1 root root    993312 Jan 26 05:13 ./slackware64/l/libsamplerate-0.1.7-x86_64-2.txz
--rw-r--r--  1 root root       198 Jan 26 05:13 ./slackware64/l/libsamplerate-0.1.7-x86_64-2.txz.asc
--rw-r--r--  1 root root       370 Apr 17 16:57 ./slackware64/l/libsndfile-1.0.24-x86_64-1.txt
--rw-r--r--  1 root root    242904 Apr 17 16:57 ./slackware64/l/libsndfile-1.0.24-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 17 16:57 ./slackware64/l/libsndfile-1.0.24-x86_64-1.txz.asc
--rw-r--r--  1 root root       413 Dec  5 18:24 ./slackware64/l/libspectre-0.2.5-x86_64-2.txt
--rw-r--r--  1 root root     38468 Dec  5 18:24 ./slackware64/l/libspectre-0.2.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec  5 18:24 ./slackware64/l/libspectre-0.2.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       477 Sep 28  2008 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txt
--rw-r--r--  1 root root     59224 Sep 28  2008 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txz
--rw-r--r--  1 root root       197 Sep 28  2008 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txz.asc
--rw-r--r--  1 root root       625 Feb 17  2010 ./slackware64/l/libtheora-1.1.1-x86_64-1.txt
--rw-r--r--  1 root root    183020 Feb 17  2010 ./slackware64/l/libtheora-1.1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 17  2010 ./slackware64/l/libtheora-1.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       394 Apr  7 21:18 ./slackware64/l/libtiff-3.9.4-x86_64-2.txt
--rw-r--r--  1 root root    472744 Apr  7 21:18 ./slackware64/l/libtiff-3.9.4-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr  7 21:18 ./slackware64/l/libtiff-3.9.4-x86_64-2.txz.asc
--rw-r--r--  1 root root       387 Mar 24 23:42 ./slackware64/l/libusb-1.0.8-x86_64-2.txt
--rw-r--r--  1 root root     65040 Mar 24 23:42 ./slackware64/l/libusb-1.0.8-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 24 23:42 ./slackware64/l/libusb-1.0.8-x86_64-2.txz.asc
--rw-r--r--  1 root root       544 Oct 10  2008 ./slackware64/l/libvisual-0.4.0-x86_64-2.txt
--rw-r--r--  1 root root    127060 Oct 10  2008 ./slackware64/l/libvisual-0.4.0-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 10  2008 ./slackware64/l/libvisual-0.4.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       722 Jun 10  2009 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txt
--rw-r--r--  1 root root    220752 Jun 10  2009 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txz
--rw-r--r--  1 root root       197 Jun 10  2009 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       374 Feb 15  2010 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txt
--rw-r--r--  1 root root    198772 Feb 15  2010 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txz
--rw-r--r--  1 root root       197 Feb 15  2010 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txz.asc
--rw-r--r--  1 root root       560 Nov 16 17:54 ./slackware64/l/libvorbis-1.3.2-x86_64-1.txt
--rw-r--r--  1 root root    308812 Nov 16 17:54 ./slackware64/l/libvorbis-1.3.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 16 17:54 ./slackware64/l/libvorbis-1.3.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       288 Feb 15  2010 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txt
--rw-r--r--  1 root root    752556 Feb 15  2010 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txz
--rw-r--r--  1 root root       197 Feb 15  2010 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txz.asc
--rw-r--r--  1 root root       305 Feb 15  2010 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txt
--rw-r--r--  1 root root    207316 Feb 15  2010 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txz
--rw-r--r--  1 root root       197 Feb 15  2010 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txz.asc
--rw-r--r--  1 root root       475 Feb 24 22:25 ./slackware64/l/libwnck-2.30.6-x86_64-1.txt
--rw-r--r--  1 root root    359812 Feb 24 22:25 ./slackware64/l/libwnck-2.30.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 24 22:25 ./slackware64/l/libwnck-2.30.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       316 Oct 20  2008 ./slackware64/l/libwpd-0.8.14-x86_64-1.txt
--rw-r--r--  1 root root    198748 Oct 20  2008 ./slackware64/l/libwpd-0.8.14-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 20  2008 ./slackware64/l/libwpd-0.8.14-x86_64-1.txz.asc
--rw-r--r--  1 root root       292 Feb 16 01:33 ./slackware64/l/libxklavier-5.1-x86_64-1.txt
--rw-r--r--  1 root root     79684 Feb 16 01:33 ./slackware64/l/libxklavier-5.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 16 01:33 ./slackware64/l/libxklavier-5.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       522 Jan  8 01:52 ./slackware64/l/libxml2-2.7.8-x86_64-3.txt
--rw-r--r--  1 root root   1424280 Jan  8 01:52 ./slackware64/l/libxml2-2.7.8-x86_64-3.txz
--rw-r--r--  1 root root       198 Jan  8 01:52 ./slackware64/l/libxml2-2.7.8-x86_64-3.txz.asc
--rw-r--r--  1 root root       220 Dec  5  2009 ./slackware64/l/libxslt-1.1.26-x86_64-1.txt
--rw-r--r--  1 root root    408116 Dec  5  2009 ./slackware64/l/libxslt-1.1.26-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec  5  2009 ./slackware64/l/libxslt-1.1.26-x86_64-1.txz.asc
--rw-r--r--  1 root root       429 Aug  9  2010 ./slackware64/l/libzip-0.9.3-x86_64-1.txt
--rw-r--r--  1 root root     90092 Aug  9  2010 ./slackware64/l/libzip-0.9.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/libzip-0.9.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       440 Apr 10  2010 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txt
--rw-r--r--  1 root root     76796 Apr 10  2010 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 10  2010 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       273 Aug  9  2010 ./slackware64/l/lzo-2.03-x86_64-1.txt
--rw-r--r--  1 root root     73672 Aug  9  2010 ./slackware64/l/lzo-2.03-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/lzo-2.03-x86_64-1.txz.asc
--rw-r--r--  1 root root     14283 Mar 31 03:51 ./slackware64/l/maketag
--rw-r--r--  1 root root     14283 Mar 31 03:51 ./slackware64/l/maketag.ez
--rw-r--r--  1 root root       468 Feb 16 21:33 ./slackware64/l/mhash-0.9.9.9-x86_64-3.txt
--rw-r--r--  1 root root    121720 Feb 16 21:33 ./slackware64/l/mhash-0.9.9.9-x86_64-3.txz
--rw-r--r--  1 root root       198 Feb 16 21:33 ./slackware64/l/mhash-0.9.9.9-x86_64-3.txz.asc
--rw-r--r--  1 root root       550 Oct 10  2008 ./slackware64/l/mm-1.4.2-x86_64-2.txt
--rw-r--r--  1 root root     32612 Oct 10  2008 ./slackware64/l/mm-1.4.2-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 10  2008 ./slackware64/l/mm-1.4.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       587 Apr  5 02:56 ./slackware64/l/mpfr-3.0.1-x86_64-1.txt
--rw-r--r--  1 root root    301412 Apr  5 02:56 ./slackware64/l/mpfr-3.0.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 02:56 ./slackware64/l/mpfr-3.0.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       446 Apr  5 02:48 ./slackware64/l/ncurses-5.9-x86_64-1.txt
--rw-r--r--  1 root root   1079328 Apr  5 02:48 ./slackware64/l/ncurses-5.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 02:48 ./slackware64/l/ncurses-5.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       343 Mar  1 20:20 ./slackware64/l/neon-0.29.5-x86_64-1.txt
--rw-r--r--  1 root root    202880 Mar  1 20:20 ./slackware64/l/neon-0.29.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  1 20:20 ./slackware64/l/neon-0.29.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       231 Feb 15  2010 ./slackware64/l/netpbm-10.49.02-x86_64-1.txt
--rw-r--r--  1 root root   1629468 Feb 15  2010 ./slackware64/l/netpbm-10.49.02-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 15  2010 ./slackware64/l/netpbm-10.49.02-x86_64-1.txz.asc
--rw-r--r--  1 root root       354 Feb 20  2010 ./slackware64/l/notify-python-0.1.1-x86_64-1.txt
--rw-r--r--  1 root root     18960 Feb 20  2010 ./slackware64/l/notify-python-0.1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 20  2010 ./slackware64/l/notify-python-0.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       457 Aug  9  2010 ./slackware64/l/openexr-1.7.0-x86_64-1.txt
--rw-r--r--  1 root root   3053004 Aug  9  2010 ./slackware64/l/openexr-1.7.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/openexr-1.7.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       429 Apr  7 01:14 ./slackware64/l/pango-1.28.4-x86_64-1.txt
--rw-r--r--  1 root root    507476 Apr  7 01:14 ./slackware64/l/pango-1.28.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  7 01:14 ./slackware64/l/pango-1.28.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       384 Nov  6 21:30 ./slackware64/l/parted-2.3-x86_64-1.txt
--rw-r--r--  1 root root    519756 Nov  6 21:30 ./slackware64/l/parted-2.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 21:30 ./slackware64/l/parted-2.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       364 Mar 26 05:23 ./slackware64/l/pcre-8.12-x86_64-1.txt
--rw-r--r--  1 root root    442552 Mar 26 05:23 ./slackware64/l/pcre-8.12-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 26 05:23 ./slackware64/l/pcre-8.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       302 Nov 27 18:02 ./slackware64/l/phonon-4.4.3-x86_64-1.txt
--rw-r--r--  1 root root    355792 Nov 27 18:02 ./slackware64/l/phonon-4.4.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 27 18:02 ./slackware64/l/phonon-4.4.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       372 Dec 18 02:34 ./slackware64/l/phonon-mplayer-20101213-x86_64-1.txt
--rw-r--r--  1 root root     89032 Dec 18 02:34 ./slackware64/l/phonon-mplayer-20101213-x86_64-1.txz
--rw-r--r--  1 root root       198 Dec 18 02:34 ./slackware64/l/phonon-mplayer-20101213-x86_64-1.txz.asc
--rw-r--r--  1 root root       419 Feb 14  2010 ./slackware64/l/pil-1.1.7-x86_64-1.txt
--rw-r--r--  1 root root    365828 Feb 14  2010 ./slackware64/l/pil-1.1.7-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 14  2010 ./slackware64/l/pil-1.1.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       416 Jan 26 19:26 ./slackware64/l/pilot-link-0.12.5-x86_64-3.txt
--rw-r--r--  1 root root    560116 Jan 26 19:26 ./slackware64/l/pilot-link-0.12.5-x86_64-3.txz
--rw-r--r--  1 root root       198 Jan 26 19:26 ./slackware64/l/pilot-link-0.12.5-x86_64-3.txz.asc
--rw-r--r--  1 root root       450 Apr 20 03:07 ./slackware64/l/polkit-0.101-x86_64-2.txt
--rw-r--r--  1 root root    364208 Apr 20 03:07 ./slackware64/l/polkit-0.101-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 20 03:07 ./slackware64/l/polkit-0.101-x86_64-2.txz.asc
--rw-r--r--  1 root root       367 Mar  7 19:12 ./slackware64/l/polkit-gnome-0.101-x86_64-1.txt
--rw-r--r--  1 root root     97712 Mar  7 19:12 ./slackware64/l/polkit-gnome-0.101-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 19:12 ./slackware64/l/polkit-gnome-0.101-x86_64-1.txz.asc
--rw-r--r--  1 root root       494 Apr  6 05:29 ./slackware64/l/poppler-0.16.4-x86_64-1.txt
--rw-r--r--  1 root root   1030660 Apr  6 05:29 ./slackware64/l/poppler-0.16.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  6 05:29 ./slackware64/l/poppler-0.16.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       601 Nov 11 20:57 ./slackware64/l/poppler-data-0.4.4-noarch-1.txt
--rw-r--r--  1 root root   1482016 Nov 11 20:57 ./slackware64/l/poppler-data-0.4.4-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 11 20:57 ./slackware64/l/poppler-data-0.4.4-noarch-1.txz.asc
--rw-r--r--  1 root root       592 Apr 30  2010 ./slackware64/l/popt-1.7-x86_64-3.txt
--rw-r--r--  1 root root     41380 Apr 30  2010 ./slackware64/l/popt-1.7-x86_64-3.txz
--rw-r--r--  1 root root       198 Apr 30  2010 ./slackware64/l/popt-1.7-x86_64-3.txz.asc
--rw-r--r--  1 root root       286 Nov  6 04:10 ./slackware64/l/pycairo-1.8.10-x86_64-1.txt
--rw-r--r--  1 root root     45312 Nov  6 04:10 ./slackware64/l/pycairo-1.8.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 04:10 ./slackware64/l/pycairo-1.8.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       239 Mar 22 06:21 ./slackware64/l/pycups-1.9.55-x86_64-1.txt
--rw-r--r--  1 root root     62288 Mar 22 06:21 ./slackware64/l/pycups-1.9.55-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 22 06:21 ./slackware64/l/pycups-1.9.55-x86_64-1.txz.asc
--rw-r--r--  1 root root       398 Nov 14 23:00 ./slackware64/l/pygobject-2.26.0-x86_64-1.txt
--rw-r--r--  1 root root    403228 Nov 14 23:00 ./slackware64/l/pygobject-2.26.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 14 23:00 ./slackware64/l/pygobject-2.26.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       320 Nov  6 04:13 ./slackware64/l/pygtk-2.22.0-x86_64-1.txt
--rw-r--r--  1 root root   1712368 Nov  6 04:13 ./slackware64/l/pygtk-2.22.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  6 04:13 ./slackware64/l/pygtk-2.22.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       392 Aug  9  2010 ./slackware64/l/pyrex-0.9.9-x86_64-1.txt
--rw-r--r--  1 root root    249272 Aug  9  2010 ./slackware64/l/pyrex-0.9.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/pyrex-0.9.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       567 Nov  3  2009 ./slackware64/l/qca-2.0.2-x86_64-1.txt
--rw-r--r--  1 root root    543344 Nov  3  2009 ./slackware64/l/qca-2.0.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Nov  3  2009 ./slackware64/l/qca-2.0.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       280 Dec 16  2008 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txt
--rw-r--r--  1 root root     25916 Dec 16  2008 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 16  2008 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz.asc
--rw-r--r--  1 root root       200 Dec 16  2008 ./slackware64/l/qca-gnupg-2.0.0_beta3-x86_64-1.txt
--rw-r--r--  1 root root     83252 Dec 16  2008 ./slackware64/l/qca-gnupg-2.0.0_beta3-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 16  2008 ./slackware64/l/qca-gnupg-2.0.0_beta3-x86_64-1.txz.asc
--rw-r--r--  1 root root       493 Dec 16  2008 ./slackware64/l/qca-ossl-2.0.0_beta3-x86_64-1.txt
--rw-r--r--  1 root root     92288 Dec 16  2008 ./slackware64/l/qca-ossl-2.0.0_beta3-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 16  2008 ./slackware64/l/qca-ossl-2.0.0_beta3-x86_64-1.txz.asc
--rw-r--r--  1 root root       395 Jul 12  2010 ./slackware64/l/qimageblitz-0.0.6-x86_64-1.txt
--rw-r--r--  1 root root     68836 Jul 12  2010 ./slackware64/l/qimageblitz-0.0.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 12  2010 ./slackware64/l/qimageblitz-0.0.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       266 Mar 25 19:07 ./slackware64/l/qt-4.7.0_7abde40-x86_64-3.txt
--rw-r--r--  1 root root  56135792 Mar 25 19:07 ./slackware64/l/qt-4.7.0_7abde40-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 25 19:07 ./slackware64/l/qt-4.7.0_7abde40-x86_64-3.txz.asc
--rw-r--r--  1 root root       488 Feb 19  2010 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txt
--rw-r--r--  1 root root   3635940 Feb 19  2010 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txz
--rw-r--r--  1 root root       197 Feb 19  2010 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       545 Mar  5  2010 ./slackware64/l/raptor-1.4.21-x86_64-1.txt
--rw-r--r--  1 root root    319968 Mar  5  2010 ./slackware64/l/raptor-1.4.21-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  5  2010 ./slackware64/l/raptor-1.4.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       428 Mar  3 22:18 ./slackware64/l/rasqal-0.9.21-x86_64-1.txt
--rw-r--r--  1 root root    258148 Mar  3 22:18 ./slackware64/l/rasqal-0.9.21-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  3 22:18 ./slackware64/l/rasqal-0.9.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       559 Feb 22  2009 ./slackware64/l/readline-5.2-x86_64-4.txt
--rw-r--r--  1 root root    280136 Feb 22  2009 ./slackware64/l/readline-5.2-x86_64-4.txz
--rw-r--r--  1 root root       197 Feb 22  2009 ./slackware64/l/readline-5.2-x86_64-4.txz.asc
--rw-r--r--  1 root root       528 Mar  3 22:23 ./slackware64/l/redland-1.0.12-x86_64-1.txt
--rw-r--r--  1 root root    290084 Mar  3 22:23 ./slackware64/l/redland-1.0.12-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  3 22:23 ./slackware64/l/redland-1.0.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       487 Apr 25 05:29 ./slackware64/l/sdl-1.2.14-x86_64-5.txt
--rw-r--r--  1 root root    666788 Apr 25 05:29 ./slackware64/l/sdl-1.2.14-x86_64-5.txz
--rw-r--r--  1 root root       198 Apr 25 05:29 ./slackware64/l/sdl-1.2.14-x86_64-5.txz.asc
--rw-r--r--  1 root root       782 Apr 11 01:34 ./slackware64/l/seamonkey-solibs-2.1b3-x86_64-2.txt
--rw-r--r--  1 root root   2156852 Apr 11 01:34 ./slackware64/l/seamonkey-solibs-2.1b3-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 11 01:34 ./slackware64/l/seamonkey-solibs-2.1b3-x86_64-2.txz.asc
--rw-r--r--  1 root root       642 Jul 12  2010 ./slackware64/l/shared-desktop-ontologies-0.5-x86_64-1.txt
--rw-r--r--  1 root root     91888 Jul 12  2010 ./slackware64/l/shared-desktop-ontologies-0.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 12  2010 ./slackware64/l/shared-desktop-ontologies-0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       512 Jan 22 04:21 ./slackware64/l/shared-mime-info-0.90-x86_64-1.txt
--rw-r--r--  1 root root    389852 Jan 22 04:21 ./slackware64/l/shared-mime-info-0.90-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:21 ./slackware64/l/shared-mime-info-0.90-x86_64-1.txz.asc
--rw-r--r--  1 root root       395 Nov 29 06:01 ./slackware64/l/sip-4.11.2-x86_64-1.txt
--rw-r--r--  1 root root    329668 Nov 29 06:01 ./slackware64/l/sip-4.11.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 29 06:01 ./slackware64/l/sip-4.11.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       538 Jan  1 20:17 ./slackware64/l/slang-2.2.3-x86_64-1.txt
--rw-r--r--  1 root root    430916 Jan  1 20:17 ./slackware64/l/slang-2.2.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  1 20:17 ./slackware64/l/slang-2.2.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       549 Oct 13  2008 ./slackware64/l/slang1-1.4.9-x86_64-1.txt
--rw-r--r--  1 root root    191920 Oct 13  2008 ./slackware64/l/slang1-1.4.9-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 13  2008 ./slackware64/l/slang1-1.4.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       389 Dec  9 18:57 ./slackware64/l/soprano-2.5.2-x86_64-2.txt
--rw-r--r--  1 root root   2120176 Dec  9 18:57 ./slackware64/l/soprano-2.5.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Dec  9 18:57 ./slackware64/l/soprano-2.5.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       359 Feb  6  2010 ./slackware64/l/startup-notification-0.10-x86_64-1.txt
--rw-r--r--  1 root root     29620 Feb  6  2010 ./slackware64/l/startup-notification-0.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  6  2010 ./slackware64/l/startup-notification-0.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       509 Feb 12 23:07 ./slackware64/l/strigi-0.7.2-x86_64-2.txt
--rw-r--r--  1 root root    726172 Feb 12 23:07 ./slackware64/l/strigi-0.7.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb 12 23:07 ./slackware64/l/strigi-0.7.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       344 Mar 10  2009 ./slackware64/l/svgalib-1.9.25-x86_64-2.txt
--rw-r--r--  1 root root    596412 Mar 10  2009 ./slackware64/l/svgalib-1.9.25-x86_64-2.txz
--rw-r--r--  1 root root       197 Mar 10  2009 ./slackware64/l/svgalib-1.9.25-x86_64-2.txz.asc
--rw-r--r--  1 root root       745 Mar 22 06:28 ./slackware64/l/system-config-printer-1.2.7-x86_64-1.txt
--rw-r--r--  1 root root    640380 Mar 22 06:28 ./slackware64/l/system-config-printer-1.2.7-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 22 06:28 ./slackware64/l/system-config-printer-1.2.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       357 Mar 31 01:16 ./slackware64/l/t1lib-5.1.2-x86_64-2.txt
--rw-r--r--  1 root root    514448 Mar 31 01:16 ./slackware64/l/t1lib-5.1.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 31 01:16 ./slackware64/l/t1lib-5.1.2-x86_64-2.txz.asc
--rw-r--r--  1 root root      2510 Mar 31 03:51 ./slackware64/l/tagfile
--rw-r--r--  1 root root       340 Jan  1 21:43 ./slackware64/l/taglib-1.6.3-x86_64-1.txt
--rw-r--r--  1 root root    227332 Jan  1 21:43 ./slackware64/l/taglib-1.6.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  1 21:43 ./slackware64/l/taglib-1.6.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       521 Oct  3  2009 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txt
--rw-r--r--  1 root root     28432 Oct  3  2009 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct  3  2009 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       523 Mar  6  2009 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txt
--rw-r--r--  1 root root   1245240 Mar  6  2009 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txz
--rw-r--r--  1 root root       197 Mar  6  2009 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txz.asc
--rw-r--r--  1 root root       541 Oct 23  2008 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txt
--rw-r--r--  1 root root     55540 Oct 23  2008 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txz.asc
--rw-r--r--  1 root root       386 Jan 27  2010 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txt
--rw-r--r--  1 root root    251080 Jan 27  2010 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Jan 27  2010 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       571 Apr 11 04:36 ./slackware64/l/v4l-utils-0.8.3-x86_64-2.txt
--rw-r--r--  1 root root    248864 Apr 11 04:36 ./slackware64/l/v4l-utils-0.8.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Apr 11 04:36 ./slackware64/l/v4l-utils-0.8.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       427 Jul 29  2010 ./slackware64/l/virtuoso-ose-6.1.2-x86_64-1.txt
--rw-r--r--  1 root root   7045000 Jul 29  2010 ./slackware64/l/virtuoso-ose-6.1.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Jul 29  2010 ./slackware64/l/virtuoso-ose-6.1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       256 Feb 16 03:59 ./slackware64/l/vte-0.26.2-x86_64-1.txt
--rw-r--r--  1 root root    385912 Feb 16 03:59 ./slackware64/l/vte-0.26.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 16 03:59 ./slackware64/l/vte-0.26.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       381 Aug  9  2010 ./slackware64/l/wavpack-4.60.1-x86_64-1.txt
--rw-r--r--  1 root root    121360 Aug  9  2010 ./slackware64/l/wavpack-4.60.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  9  2010 ./slackware64/l/wavpack-4.60.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       422 Dec 17  2009 ./slackware64/l/wv2-0.4.2-x86_64-1.txt
--rw-r--r--  1 root root    263140 Dec 17  2009 ./slackware64/l/wv2-0.4.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 17  2009 ./slackware64/l/wv2-0.4.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       359 Feb  9 18:12 ./slackware64/l/zlib-1.2.5-x86_64-4.txt
--rw-r--r--  1 root root     97088 Feb  9 18:12 ./slackware64/l/zlib-1.2.5-x86_64-4.txz
--rw-r--r--  1 root root       198 Feb  9 18:12 ./slackware64/l/zlib-1.2.5-x86_64-4.txz.asc
-drwxr-xr-x  2 root root     28672 Apr 16 04:36 ./slackware64/n
--rw-r--r--  1 root root       645 Mar  6  2010 ./slackware64/n/alpine-2.00-x86_64-3.txt
--rw-r--r--  1 root root   1937736 Mar  6  2010 ./slackware64/n/alpine-2.00-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar  6  2010 ./slackware64/n/alpine-2.00-x86_64-3.txz.asc
--rw-r--r--  1 root root       416 Mar  5  2010 ./slackware64/n/autofs-5.0.5-x86_64-1.txt
--rw-r--r--  1 root root    304952 Mar  5  2010 ./slackware64/n/autofs-5.0.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  5  2010 ./slackware64/n/autofs-5.0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       686 Oct 23  2008 ./slackware64/n/biff+comsat-0.17-x86_64-1.txt
--rw-r--r--  1 root root     10972 Oct 23  2008 ./slackware64/n/biff+comsat-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/n/biff+comsat-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       336 Mar 26 07:17 ./slackware64/n/bind-9.7.3-x86_64-2.txt
--rw-r--r--  1 root root   1873616 Mar 26 07:17 ./slackware64/n/bind-9.7.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 26 07:17 ./slackware64/n/bind-9.7.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       347 Mar 31 02:54 ./slackware64/n/bluez-4.91-x86_64-1.txt
--rw-r--r--  1 root root    520052 Mar 31 02:54 ./slackware64/n/bluez-4.91-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 31 02:54 ./slackware64/n/bluez-4.91-x86_64-1.txz.asc
--rw-r--r--  1 root root       367 Oct 23  2008 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txt
--rw-r--r--  1 root root     71980 Oct 23  2008 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 23  2008 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       445 Mar  7 19:29 ./slackware64/n/bluez-hcidump-2.0-x86_64-1.txt
--rw-r--r--  1 root root     92468 Mar  7 19:29 ./slackware64/n/bluez-hcidump-2.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 19:29 ./slackware64/n/bluez-hcidump-2.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       420 Oct 14  2008 ./slackware64/n/bootp-2.4.3-x86_64-2.txt
--rw-r--r--  1 root root     49328 Oct 14  2008 ./slackware64/n/bootp-2.4.3-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 14  2008 ./slackware64/n/bootp-2.4.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       591 Aug 10  2010 ./slackware64/n/bridge-utils-1.4-x86_64-1.txt
--rw-r--r--  1 root root     29096 Aug 10  2010 ./slackware64/n/bridge-utils-1.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 10  2010 ./slackware64/n/bridge-utils-1.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       613 Oct 25  2008 ./slackware64/n/bsd-finger-0.17-x86_64-1.txt
--rw-r--r--  1 root root     18984 Oct 25  2008 ./slackware64/n/bsd-finger-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 25  2008 ./slackware64/n/bsd-finger-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       430 Nov 16 17:57 ./slackware64/n/ca-certificates-20090814-noarch-1.txt
--rw-r--r--  1 root root    113936 Nov 16 17:57 ./slackware64/n/ca-certificates-20090814-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 16 17:57 ./slackware64/n/ca-certificates-20090814-noarch-1.txz.asc
--rw-r--r--  1 root root       415 May  3  2010 ./slackware64/n/crda-1.1.1-x86_64-1.txt
--rw-r--r--  1 root root     13484 May  3  2010 ./slackware64/n/crda-1.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/n/crda-1.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       555 Mar 29 19:36 ./slackware64/n/curl-7.21.4-x86_64-1.txt
--rw-r--r--  1 root root    695512 Mar 29 19:36 ./slackware64/n/curl-7.21.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 29 19:36 ./slackware64/n/curl-7.21.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       375 May 15  2009 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txt
--rw-r--r--  1 root root    413528 May 15  2009 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txz
--rw-r--r--  1 root root       197 May 15  2009 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txz.asc
--rw-r--r--  1 root root       644 Apr  6 19:14 ./slackware64/n/dhcp-4.2.1_P1-x86_64-1.txt
--rw-r--r--  1 root root   1141948 Apr  6 19:14 ./slackware64/n/dhcp-4.2.1_P1-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  6 19:14 ./slackware64/n/dhcp-4.2.1_P1-x86_64-1.txz.asc
--rw-r--r--  1 root root       443 Mar  7 23:05 ./slackware64/n/dhcpcd-5.2.11-x86_64-1.txt
--rw-r--r--  1 root root     62540 Mar  7 23:05 ./slackware64/n/dhcpcd-5.2.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 23:05 ./slackware64/n/dhcpcd-5.2.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       494 Mar  7 20:19 ./slackware64/n/dirmngr-1.1.0-x86_64-1.txt
--rw-r--r--  1 root root    198520 Mar  7 20:19 ./slackware64/n/dirmngr-1.1.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:19 ./slackware64/n/dirmngr-1.1.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       396 Mar 16 05:33 ./slackware64/n/dnsmasq-2.57-x86_64-1.txt
--rw-r--r--  1 root root    233680 Mar 16 05:33 ./slackware64/n/dnsmasq-2.57-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 16 05:33 ./slackware64/n/dnsmasq-2.57-x86_64-1.txz.asc
--rw-r--r--  1 root root       224 Aug 13  2009 ./slackware64/n/elm-2.5.8-x86_64-3.txt
--rw-r--r--  1 root root    254788 Aug 13  2009 ./slackware64/n/elm-2.5.8-x86_64-3.txz
--rw-r--r--  1 root root       197 Aug 13  2009 ./slackware64/n/elm-2.5.8-x86_64-3.txz.asc
--rw-r--r--  1 root root       321 May 17  2010 ./slackware64/n/epic5-1.1.2-x86_64-1.txt
--rw-r--r--  1 root root    706312 May 17  2010 ./slackware64/n/epic5-1.1.2-x86_64-1.txz
--rw-r--r--  1 root root       198 May 17  2010 ./slackware64/n/epic5-1.1.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       441 Mar 25 05:54 ./slackware64/n/ethtool-2.6.36-x86_64-1.txt
--rw-r--r--  1 root root     72564 Mar 25 05:54 ./slackware64/n/ethtool-2.6.36-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 05:54 ./slackware64/n/ethtool-2.6.36-x86_64-1.txz.asc
--rw-r--r--  1 root root       607 Apr  5 06:27 ./slackware64/n/fetchmail-6.3.19-x86_64-1.txt
--rw-r--r--  1 root root    589496 Apr  5 06:27 ./slackware64/n/fetchmail-6.3.19-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 06:27 ./slackware64/n/fetchmail-6.3.19-x86_64-1.txz.asc
--rw-r--r--  1 root root       363 Apr  5 06:26 ./slackware64/n/getmail-4.20.0-x86_64-1.txt
--rw-r--r--  1 root root    144044 Apr  5 06:26 ./slackware64/n/getmail-4.20.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 06:26 ./slackware64/n/getmail-4.20.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       371 Mar  9 22:30 ./slackware64/n/gnupg-1.4.11-x86_64-1.txt
--rw-r--r--  1 root root   1112784 Mar  9 22:30 ./slackware64/n/gnupg-1.4.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 22:30 ./slackware64/n/gnupg-1.4.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       601 Mar  7 20:24 ./slackware64/n/gnupg2-2.0.17-x86_64-1.txt
--rw-r--r--  1 root root   1597732 Mar  7 20:24 ./slackware64/n/gnupg2-2.0.17-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:24 ./slackware64/n/gnupg2-2.0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       493 Mar  7 20:36 ./slackware64/n/gnutls-2.10.5-x86_64-1.txt
--rw-r--r--  1 root root   1576076 Mar  7 20:36 ./slackware64/n/gnutls-2.10.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:36 ./slackware64/n/gnutls-2.10.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       287 Oct 20  2008 ./slackware64/n/gpa-0.7.5-x86_64-1.txt
--rw-r--r--  1 root root    185464 Oct 20  2008 ./slackware64/n/gpa-0.7.5-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 20  2008 ./slackware64/n/gpa-0.7.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       539 Mar  7 20:21 ./slackware64/n/gpgme-1.3.0-x86_64-1.txt
--rw-r--r--  1 root root    245336 Mar  7 20:21 ./slackware64/n/gpgme-1.3.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:21 ./slackware64/n/gpgme-1.3.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       435 Oct 15  2008 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txt
--rw-r--r--  1 root root    939096 Oct 15  2008 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txz
--rw-r--r--  1 root root       197 Oct 15  2008 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txz.asc
--rw-r--r--  1 root root       514 Feb 12 19:26 ./slackware64/n/httpd-2.2.17-x86_64-3.txt
--rw-r--r--  1 root root   1487252 Feb 12 19:26 ./slackware64/n/httpd-2.2.17-x86_64-3.txz
--rw-r--r--  1 root root       198 Feb 12 19:26 ./slackware64/n/httpd-2.2.17-x86_64-3.txz.asc
--rw-r--r--  1 root root       366 Oct 25  2008 ./slackware64/n/icmpinfo-1.11-x86_64-1.txt
--rw-r--r--  1 root root      9396 Oct 25  2008 ./slackware64/n/icmpinfo-1.11-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 25  2008 ./slackware64/n/icmpinfo-1.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       441 Mar 25 21:45 ./slackware64/n/idnkit-1.0-x86_64-1.txt
--rw-r--r--  1 root root    140632 Mar 25 21:45 ./slackware64/n/idnkit-1.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 21:45 ./slackware64/n/idnkit-1.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       293 May 23  2009 ./slackware64/n/imapd-2.00-x86_64-2.txt
--rw-r--r--  1 root root    466172 May 23  2009 ./slackware64/n/imapd-2.00-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/imapd-2.00-x86_64-2.txz.asc
--rw-r--r--  1 root root       454 Oct 14  2008 ./slackware64/n/inetd-1.79s-x86_64-8.txt
--rw-r--r--  1 root root     20976 Oct 14  2008 ./slackware64/n/inetd-1.79s-x86_64-8.txz
--rw-r--r--  1 root root       197 Oct 14  2008 ./slackware64/n/inetd-1.79s-x86_64-8.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/n/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/n/install.end
--rw-r--r--  1 root root       478 Mar 16 03:11 ./slackware64/n/iproute2-2.6.37-x86_64-1.txt
--rw-r--r--  1 root root    376396 Mar 16 03:11 ./slackware64/n/iproute2-2.6.37-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 16 03:11 ./slackware64/n/iproute2-2.6.37-x86_64-1.txz.asc
--rw-r--r--  1 root root       670 Nov  5 16:32 ./slackware64/n/iptables-1.4.10-x86_64-1.txt
--rw-r--r--  1 root root    294416 Nov  5 16:32 ./slackware64/n/iptables-1.4.10-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  5 16:32 ./slackware64/n/iptables-1.4.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       588 Mar 12 18:48 ./slackware64/n/iptraf-ng-1.0.2-x86_64-2.txt
--rw-r--r--  1 root root    296188 Mar 12 18:48 ./slackware64/n/iptraf-ng-1.0.2-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 12 18:48 ./slackware64/n/iptraf-ng-1.0.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       423 Mar 25 05:50 ./slackware64/n/iputils-s20101006-x86_64-1.txt
--rw-r--r--  1 root root     76476 Mar 25 05:50 ./slackware64/n/iputils-s20101006-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 05:50 ./slackware64/n/iputils-s20101006-x86_64-1.txz.asc
--rw-r--r--  1 root root       479 Nov  4  2008 ./slackware64/n/ipw2100-fw-1.3-fw-1.txt
--rw-r--r--  1 root root    119440 Nov  4  2008 ./slackware64/n/ipw2100-fw-1.3-fw-1.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/n/ipw2100-fw-1.3-fw-1.txz.asc
--rw-r--r--  1 root root       532 May  3  2010 ./slackware64/n/ipw2200-fw-3.1-fw-1.txt
--rw-r--r--  1 root root    118824 May  3  2010 ./slackware64/n/ipw2200-fw-3.1-fw-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/n/ipw2200-fw-3.1-fw-1.txz.asc
--rw-r--r--  1 root root       333 Jan 26 19:09 ./slackware64/n/irssi-0.8.15-x86_64-3.txt
--rw-r--r--  1 root root   1142936 Jan 26 19:09 ./slackware64/n/irssi-0.8.15-x86_64-3.txz
--rw-r--r--  1 root root       198 Jan 26 19:09 ./slackware64/n/irssi-0.8.15-x86_64-3.txz.asc
--rw-r--r--  1 root root       426 Aug 12  2010 ./slackware64/n/iw-0.9.20-x86_64-1.txt
--rw-r--r--  1 root root     32944 Aug 12  2010 ./slackware64/n/iw-0.9.20-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 12  2010 ./slackware64/n/iw-0.9.20-x86_64-1.txz.asc
--rw-r--r--  1 root root       483 Mar  3 21:00 ./slackware64/n/iwlwifi-100-ucode-39.31.5.1-fw-1.txt
--rw-r--r--  1 root root    118852 Mar  3 21:00 ./slackware64/n/iwlwifi-100-ucode-39.31.5.1-fw-1.txz
--rw-r--r--  1 root root       198 Mar  3 21:00 ./slackware64/n/iwlwifi-100-ucode-39.31.5.1-fw-1.txz.asc
--rw-r--r--  1 root root       484 May  3  2010 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txt
--rw-r--r--  1 root root    115892 May  3  2010 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz.asc
--rw-r--r--  1 root root       518 Jul  1  2009 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txt
--rw-r--r--  1 root root     65720 Jul  1  2009 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz
--rw-r--r--  1 root root       197 Jul  1  2009 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz.asc
--rw-r--r--  1 root root       518 Jul 16  2009 ./slackware64/n/iwlwifi-4965-ucode-228.61.2.24-fw-1.txt
--rw-r--r--  1 root root     77788 Jul 16  2009 ./slackware64/n/iwlwifi-4965-ucode-228.61.2.24-fw-1.txz
--rw-r--r--  1 root root       197 Jul 16  2009 ./slackware64/n/iwlwifi-4965-ucode-228.61.2.24-fw-1.txz.asc
--rw-r--r--  1 root root       512 Mar  3 20:56 ./slackware64/n/iwlwifi-5000-ucode-8.83.5.1-fw-1.txt
--rw-r--r--  1 root root    259024 Mar  3 20:56 ./slackware64/n/iwlwifi-5000-ucode-8.83.5.1-fw-1.txz
--rw-r--r--  1 root root       198 Mar  3 20:56 ./slackware64/n/iwlwifi-5000-ucode-8.83.5.1-fw-1.txz.asc
--rw-r--r--  1 root root       509 Jul 15  2009 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txt
--rw-r--r--  1 root root    115588 Jul 15  2009 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz
--rw-r--r--  1 root root       197 Jul 15  2009 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz.asc
--rw-r--r--  1 root root       484 Mar  3 20:50 ./slackware64/n/iwlwifi-6000-ucode-9.221.4.1-fw-1.txt
--rw-r--r--  1 root root    135044 Mar  3 20:50 ./slackware64/n/iwlwifi-6000-ucode-9.221.4.1-fw-1.txz
--rw-r--r--  1 root root       198 Mar  3 20:50 ./slackware64/n/iwlwifi-6000-ucode-9.221.4.1-fw-1.txz.asc
--rw-r--r--  1 root root       484 Mar  3 21:41 ./slackware64/n/iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txt
--rw-r--r--  1 root root    317340 Mar  3 21:41 ./slackware64/n/iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz
--rw-r--r--  1 root root       198 Mar  3 21:41 ./slackware64/n/iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz.asc
--rw-r--r--  1 root root       582 Apr 14 18:09 ./slackware64/n/lftp-4.2.2-x86_64-1.txt
--rw-r--r--  1 root root    669212 Apr 14 18:09 ./slackware64/n/lftp-4.2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 14 18:09 ./slackware64/n/lftp-4.2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       252 Aug 11  2010 ./slackware64/n/libassuan-2.0.1-x86_64-1.txt
--rw-r--r--  1 root root    102544 Aug 11  2010 ./slackware64/n/libassuan-2.0.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 11  2010 ./slackware64/n/libassuan-2.0.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       245 Aug 11  2010 ./slackware64/n/libgcrypt-1.4.6-x86_64-1.txt
--rw-r--r--  1 root root    400052 Aug 11  2010 ./slackware64/n/libgcrypt-1.4.6-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 11  2010 ./slackware64/n/libgcrypt-1.4.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       393 Aug 11  2010 ./slackware64/n/libgpg-error-1.9-x86_64-1.txt
--rw-r--r--  1 root root     83024 Aug 11  2010 ./slackware64/n/libgpg-error-1.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 11  2010 ./slackware64/n/libgpg-error-1.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       332 Mar  7 20:16 ./slackware64/n/libksba-1.2.0-x86_64-1.txt
--rw-r--r--  1 root root    133940 Mar  7 20:16 ./slackware64/n/libksba-1.2.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:16 ./slackware64/n/libksba-1.2.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       446 Feb 18  2010 ./slackware64/n/links-2.3pre1-x86_64-1.txt
--rw-r--r--  1 root root   1869348 Feb 18  2010 ./slackware64/n/links-2.3pre1-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 18  2010 ./slackware64/n/links-2.3pre1-x86_64-1.txz.asc
--rw-r--r--  1 root root       498 Feb 12  2010 ./slackware64/n/lynx-2.8.7-x86_64-1.txt
--rw-r--r--  1 root root   1615412 Feb 12  2010 ./slackware64/n/lynx-2.8.7-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 12  2010 ./slackware64/n/lynx-2.8.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       567 Aug 11  2009 ./slackware64/n/mailx-12.4-x86_64-1.txt
--rw-r--r--  1 root root    240064 Aug 11  2009 ./slackware64/n/mailx-12.4-x86_64-1.txz
--rw-r--r--  1 root root       197 Aug 11  2009 ./slackware64/n/mailx-12.4-x86_64-1.txz.asc
--rw-r--r--  1 root root     10563 Mar 25 22:06 ./slackware64/n/maketag
--rw-r--r--  1 root root     10563 Mar 25 22:06 ./slackware64/n/maketag.ez
--rw-r--r--  1 root root       418 Mar 14 03:39 ./slackware64/n/mcabber-0.10.1-x86_64-1.txt
--rw-r--r--  1 root root    221752 Mar 14 03:39 ./slackware64/n/mcabber-0.10.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 14 03:39 ./slackware64/n/mcabber-0.10.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       468 Aug 12  2010 ./slackware64/n/metamail-2.7-x86_64-5.txt
--rw-r--r--  1 root root    126392 Aug 12  2010 ./slackware64/n/metamail-2.7-x86_64-5.txz
--rw-r--r--  1 root root       198 Aug 12  2010 ./slackware64/n/metamail-2.7-x86_64-5.txz.asc
--rw-r--r--  1 root root       325 Mar 25 05:19 ./slackware64/n/mtr-0.80-x86_64-1.txt
--rw-r--r--  1 root root     55404 Mar 25 05:19 ./slackware64/n/mtr-0.80-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 05:19 ./slackware64/n/mtr-0.80-x86_64-1.txz.asc
--rw-r--r--  1 root root       411 Oct 25 17:58 ./slackware64/n/mutt-1.5.21-x86_64-1.txt
--rw-r--r--  1 root root    997964 Oct 25 17:58 ./slackware64/n/mutt-1.5.21-x86_64-1.txz
--rw-r--r--  1 root root       198 Oct 25 17:58 ./slackware64/n/mutt-1.5.21-x86_64-1.txz.asc
--rw-r--r--  1 root root       628 Oct 28  2008 ./slackware64/n/nc-1.10-x86_64-1.txt
--rw-r--r--  1 root root     53592 Oct 28  2008 ./slackware64/n/nc-1.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 28  2008 ./slackware64/n/nc-1.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       337 Jan 22 04:13 ./slackware64/n/ncftp-3.2.5-x86_64-1.txt
--rw-r--r--  1 root root    272456 Jan 22 04:13 ./slackware64/n/ncftp-3.2.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:13 ./slackware64/n/ncftp-3.2.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       451 Mar 19 22:17 ./slackware64/n/net-snmp-5.6.1-x86_64-1.txt
--rw-r--r--  1 root root   2014200 Mar 19 22:17 ./slackware64/n/net-snmp-5.6.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 19 22:17 ./slackware64/n/net-snmp-5.6.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       449 Aug 12  2010 ./slackware64/n/net-tools-1.60-x86_64-3.txt
--rw-r--r--  1 root root    119416 Aug 12  2010 ./slackware64/n/net-tools-1.60-x86_64-3.txz
--rw-r--r--  1 root root       198 Aug 12  2010 ./slackware64/n/net-tools-1.60-x86_64-3.txz.asc
--rw-r--r--  1 root root       581 Feb 17  2010 ./slackware64/n/netatalk-2.0.5-x86_64-1.txt
--rw-r--r--  1 root root    480208 Feb 17  2010 ./slackware64/n/netatalk-2.0.5-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 17  2010 ./slackware64/n/netatalk-2.0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       649 Oct 28  2008 ./slackware64/n/netdate-bsd4-x86_64-1.txt
--rw-r--r--  1 root root      8812 Oct 28  2008 ./slackware64/n/netdate-bsd4-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 28  2008 ./slackware64/n/netdate-bsd4-x86_64-1.txz.asc
--rw-r--r--  1 root root       518 May 23  2009 ./slackware64/n/netkit-bootparamd-0.17-x86_64-2.txt
--rw-r--r--  1 root root      9232 May 23  2009 ./slackware64/n/netkit-bootparamd-0.17-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/netkit-bootparamd-0.17-x86_64-2.txz.asc
--rw-r--r--  1 root root       444 Sep 23  2008 ./slackware64/n/netkit-ftp-0.17-x86_64-1.txt
--rw-r--r--  1 root root     44944 Sep 23  2008 ./slackware64/n/netkit-ftp-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/n/netkit-ftp-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       478 May 23  2009 ./slackware64/n/netkit-ntalk-0.17-x86_64-3.txt
--rw-r--r--  1 root root     26168 May 23  2009 ./slackware64/n/netkit-ntalk-0.17-x86_64-3.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/netkit-ntalk-0.17-x86_64-3.txz.asc
--rw-r--r--  1 root root       636 Sep 23  2008 ./slackware64/n/netkit-routed-0.17-x86_64-1.txt
--rw-r--r--  1 root root     25544 Sep 23  2008 ./slackware64/n/netkit-routed-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/n/netkit-routed-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       423 Sep 23  2008 ./slackware64/n/netkit-rsh-0.17-x86_64-1.txt
--rw-r--r--  1 root root     42092 Sep 23  2008 ./slackware64/n/netkit-rsh-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/n/netkit-rsh-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       696 Sep 23  2008 ./slackware64/n/netkit-rusers-0.17-x86_64-1.txt
--rw-r--r--  1 root root     17720 Sep 23  2008 ./slackware64/n/netkit-rusers-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/n/netkit-rusers-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       462 Sep 23  2008 ./slackware64/n/netkit-rwall-0.17-x86_64-1.txt
--rw-r--r--  1 root root     10388 Sep 23  2008 ./slackware64/n/netkit-rwall-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Sep 23  2008 ./slackware64/n/netkit-rwall-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       691 Dec 14  2008 ./slackware64/n/netkit-rwho-0.17-x86_64-2.txt
--rw-r--r--  1 root root     17040 Dec 14  2008 ./slackware64/n/netkit-rwho-0.17-x86_64-2.txz
--rw-r--r--  1 root root       197 Dec 14  2008 ./slackware64/n/netkit-rwho-0.17-x86_64-2.txz.asc
--rw-r--r--  1 root root       407 Dec 14  2008 ./slackware64/n/netkit-timed-0.17-x86_64-1.txt
--rw-r--r--  1 root root     30900 Dec 14  2008 ./slackware64/n/netkit-timed-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Dec 14  2008 ./slackware64/n/netkit-timed-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       560 Oct 15  2008 ./slackware64/n/netpipes-4.2-x86_64-1.txt
--rw-r--r--  1 root root     70156 Oct 15  2008 ./slackware64/n/netpipes-4.2-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 15  2008 ./slackware64/n/netpipes-4.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       306 May 23  2009 ./slackware64/n/netwatch-1.3.0-x86_64-2.txt
--rw-r--r--  1 root root     95588 May 23  2009 ./slackware64/n/netwatch-1.3.0-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/netwatch-1.3.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       583 Jan 18  2010 ./slackware64/n/network-scripts-13.0-noarch-3.txt
--rw-r--r--  1 root root     19968 Jan 18  2010 ./slackware64/n/network-scripts-13.0-noarch-3.txz
--rw-r--r--  1 root root       197 Jan 18  2010 ./slackware64/n/network-scripts-13.0-noarch-3.txz.asc
--rw-r--r--  1 root root       560 Oct 28  2008 ./slackware64/n/netwrite-0.17-x86_64-1.txt
--rw-r--r--  1 root root      6836 Oct 28  2008 ./slackware64/n/netwrite-0.17-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 28  2008 ./slackware64/n/netwrite-0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       511 Oct 28  2008 ./slackware64/n/newspost-2.1.1-x86_64-1.txt
--rw-r--r--  1 root root     42084 Oct 28  2008 ./slackware64/n/newspost-2.1.1-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 28  2008 ./slackware64/n/newspost-2.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       322 Mar 21 23:42 ./slackware64/n/nfs-utils-1.2.3-x86_64-3.txt
--rw-r--r--  1 root root    216564 Mar 21 23:42 ./slackware64/n/nfs-utils-1.2.3-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 21 23:42 ./slackware64/n/nfs-utils-1.2.3-x86_64-3.txz.asc
--rw-r--r--  1 root root       652 Mar 10 03:51 ./slackware64/n/nmap-5.51-x86_64-1.txt
--rw-r--r--  1 root root   3140092 Mar 10 03:51 ./slackware64/n/nmap-5.51-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 10 03:51 ./slackware64/n/nmap-5.51-x86_64-1.txz.asc
--rw-r--r--  1 root root       444 Nov 12  2009 ./slackware64/n/nn-6.7.3-x86_64-3.txt
--rw-r--r--  1 root root    303276 Nov 12  2009 ./slackware64/n/nn-6.7.3-x86_64-3.txz
--rw-r--r--  1 root root       197 Nov 12  2009 ./slackware64/n/nn-6.7.3-x86_64-3.txz.asc
--rw-r--r--  1 root root       532 Jan 26 00:15 ./slackware64/n/ntp-4.2.6p3-x86_64-1.txt
--rw-r--r--  1 root root   1514612 Jan 26 00:15 ./slackware64/n/ntp-4.2.6p3-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 26 00:15 ./slackware64/n/ntp-4.2.6p3-x86_64-1.txz.asc
--rw-r--r--  1 root root       430 Nov  6 20:40 ./slackware64/n/obex-data-server-0.4.5-x86_64-2.txt
--rw-r--r--  1 root root     71452 Nov  6 20:40 ./slackware64/n/obex-data-server-0.4.5-x86_64-2.txz
--rw-r--r--  1 root root       198 Nov  6 20:40 ./slackware64/n/obex-data-server-0.4.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       419 May  2  2010 ./slackware64/n/obexfs-0.12-x86_64-1.txt
--rw-r--r--  1 root root     20300 May  2  2010 ./slackware64/n/obexfs-0.12-x86_64-1.txz
--rw-r--r--  1 root root       198 May  2  2010 ./slackware64/n/obexfs-0.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       466 Jan 26 19:24 ./slackware64/n/obexftp-0.23-x86_64-5.txt
--rw-r--r--  1 root root    100780 Jan 26 19:24 ./slackware64/n/obexftp-0.23-x86_64-5.txz
--rw-r--r--  1 root root       198 Jan 26 19:24 ./slackware64/n/obexftp-0.23-x86_64-5.txz.asc
--rw-r--r--  1 root root       565 Jan  1 23:04 ./slackware64/n/openldap-client-2.4.23-x86_64-1.txt
--rw-r--r--  1 root root    391000 Jan  1 23:04 ./slackware64/n/openldap-client-2.4.23-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan  1 23:04 ./slackware64/n/openldap-client-2.4.23-x86_64-1.txz.asc
--rw-r--r--  1 root root       538 May  2  2010 ./slackware64/n/openobex-1.5-x86_64-1.txt
--rw-r--r--  1 root root     52832 May  2  2010 ./slackware64/n/openobex-1.5-x86_64-1.txz
--rw-r--r--  1 root root       198 May  2  2010 ./slackware64/n/openobex-1.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       676 Feb  4 16:33 ./slackware64/n/openssh-5.8p1-x86_64-1.txt
--rw-r--r--  1 root root    588120 Feb  4 16:33 ./slackware64/n/openssh-5.8p1-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb  4 16:33 ./slackware64/n/openssh-5.8p1-x86_64-1.txz.asc
--rw-r--r--  1 root root       561 Mar 22 19:19 ./slackware64/n/openssl-0.9.8r-x86_64-3.txt
--rw-r--r--  1 root root   2416304 Mar 22 19:19 ./slackware64/n/openssl-0.9.8r-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 22 19:19 ./slackware64/n/openssl-0.9.8r-x86_64-3.txz.asc
--rw-r--r--  1 root root       430 Mar 29 20:08 ./slackware64/n/openvpn-2.1.4-x86_64-2.txt
--rw-r--r--  1 root root    329956 Mar 29 20:08 ./slackware64/n/openvpn-2.1.4-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar 29 20:08 ./slackware64/n/openvpn-2.1.4-x86_64-2.txz.asc
--rw-r--r--  1 root root       376 Apr 14 19:44 ./slackware64/n/php-5.3.6-x86_64-6.txt
--rw-r--r--  1 root root   5752792 Apr 14 19:44 ./slackware64/n/php-5.3.6-x86_64-6.txz
--rw-r--r--  1 root root       198 Apr 14 19:44 ./slackware64/n/php-5.3.6-x86_64-6.txz.asc
--rw-r--r--  1 root root       578 Oct 28  2008 ./slackware64/n/pidentd-3.0.19-x86_64-1.txt
--rw-r--r--  1 root root     42368 Oct 28  2008 ./slackware64/n/pidentd-3.0.19-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 28  2008 ./slackware64/n/pidentd-3.0.19-x86_64-1.txz.asc
--rw-r--r--  1 root root       322 Mar  7 20:22 ./slackware64/n/pinentry-0.8.1-x86_64-1.txt
--rw-r--r--  1 root root    119024 Mar  7 20:22 ./slackware64/n/pinentry-0.8.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  7 20:22 ./slackware64/n/pinentry-0.8.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       545 Oct 31  2008 ./slackware64/n/popa3d-1.0.2-x86_64-2.txt
--rw-r--r--  1 root root     20584 Oct 31  2008 ./slackware64/n/popa3d-1.0.2-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 31  2008 ./slackware64/n/popa3d-1.0.2-x86_64-2.txz.asc
--rw-r--r--  1 root root       529 Oct 14  2008 ./slackware64/n/portmap-6.0-x86_64-1.txt
--rw-r--r--  1 root root     27588 Oct 14  2008 ./slackware64/n/portmap-6.0-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 14  2008 ./slackware64/n/portmap-6.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       451 Feb 12  2010 ./slackware64/n/ppp-2.4.5-x86_64-1.txt
--rw-r--r--  1 root root    367944 Feb 12  2010 ./slackware64/n/ppp-2.4.5-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 12  2010 ./slackware64/n/ppp-2.4.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       687 Oct 31  2008 ./slackware64/n/procmail-3.22-x86_64-2.txt
--rw-r--r--  1 root root    132440 Oct 31  2008 ./slackware64/n/procmail-3.22-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 31  2008 ./slackware64/n/procmail-3.22-x86_64-2.txz.asc
--rw-r--r--  1 root root       339 Apr  5 03:57 ./slackware64/n/proftpd-1.3.3e-x86_64-1.txt
--rw-r--r--  1 root root    786260 Apr  5 03:57 ./slackware64/n/proftpd-1.3.3e-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 03:57 ./slackware64/n/proftpd-1.3.3e-x86_64-1.txz.asc
--rw-r--r--  1 root root       580 Jan 23 07:56 ./slackware64/n/pssh-2.2-x86_64-1.txt
--rw-r--r--  1 root root     28720 Jan 23 07:56 ./slackware64/n/pssh-2.2-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 23 07:56 ./slackware64/n/pssh-2.2-x86_64-1.txz.asc
--rw-r--r--  1 root root       472 Oct 14  2008 ./slackware64/n/pth-2.0.7-x86_64-1.txt
--rw-r--r--  1 root root    101100 Oct 14  2008 ./slackware64/n/pth-2.0.7-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 14  2008 ./slackware64/n/pth-2.0.7-x86_64-1.txz.asc
--rw-r--r--  1 root root       355 Jan 25  2010 ./slackware64/n/rdist-6.1.5-x86_64-2.txt
--rw-r--r--  1 root root     59660 Jan 25  2010 ./slackware64/n/rdist-6.1.5-x86_64-2.txz
--rw-r--r--  1 root root       197 Jan 25  2010 ./slackware64/n/rdist-6.1.5-x86_64-2.txz.asc
--rw-r--r--  1 root root       287 Jan 22 04:34 ./slackware64/n/rfkill-0.4-x86_64-1.txt
--rw-r--r--  1 root root      5872 Jan 22 04:34 ./slackware64/n/rfkill-0.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Jan 22 04:34 ./slackware64/n/rfkill-0.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       499 Oct 31  2008 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txt
--rw-r--r--  1 root root     84764 Oct 31  2008 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 31  2008 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txz.asc
--rw-r--r--  1 root root       494 Mar 27 00:54 ./slackware64/n/rsync-3.0.8-x86_64-1.txt
--rw-r--r--  1 root root    277320 Mar 27 00:54 ./slackware64/n/rsync-3.0.8-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 27 00:54 ./slackware64/n/rsync-3.0.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       450 May 16  2010 ./slackware64/n/rt2860-firmware-26-fw-1.txt
--rw-r--r--  1 root root      4656 May 16  2010 ./slackware64/n/rt2860-firmware-26-fw-1.txz
--rw-r--r--  1 root root       198 May 16  2010 ./slackware64/n/rt2860-firmware-26-fw-1.txz.asc
--rw-r--r--  1 root root       341 May 16  2010 ./slackware64/n/rt2870-firmware-22-fw-1.txt
--rw-r--r--  1 root root      3692 May 16  2010 ./slackware64/n/rt2870-firmware-22-fw-1.txz
--rw-r--r--  1 root root       198 May 16  2010 ./slackware64/n/rt2870-firmware-22-fw-1.txz.asc
--rw-r--r--  1 root root       273 Nov  4  2008 ./slackware64/n/rt61-firmware-1.2-fw-1.txt
--rw-r--r--  1 root root      7224 Nov  4  2008 ./slackware64/n/rt61-firmware-1.2-fw-1.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/n/rt61-firmware-1.2-fw-1.txz.asc
--rw-r--r--  1 root root       287 Nov  4  2008 ./slackware64/n/rt71w-firmware-1.8-fw-1.txt
--rw-r--r--  1 root root      2808 Nov  4  2008 ./slackware64/n/rt71w-firmware-1.8-fw-1.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/n/rt71w-firmware-1.8-fw-1.txz.asc
--rw-r--r--  1 root root       529 Mar  8 19:04 ./slackware64/n/samba-3.5.8-x86_64-1.txt
--rw-r--r--  1 root root  21775844 Mar  8 19:04 ./slackware64/n/samba-3.5.8-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  8 19:04 ./slackware64/n/samba-3.5.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       503 Apr 23  2010 ./slackware64/n/sendmail-8.14.4-x86_64-1.txt
--rw-r--r--  1 root root    949108 Apr 23  2010 ./slackware64/n/sendmail-8.14.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr 23  2010 ./slackware64/n/sendmail-8.14.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       588 Apr 23  2010 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txt
--rw-r--r--  1 root root    114172 Apr 23  2010 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txz
--rw-r--r--  1 root root       198 Apr 23  2010 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txz.asc
--rw-r--r--  1 root root       309 May 19  2010 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txt
--rw-r--r--  1 root root    460120 May 19  2010 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txz
--rw-r--r--  1 root root       198 May 19  2010 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txz.asc
--rw-r--r--  1 root root       415 May  3  2010 ./slackware64/n/snownews-1.5.12-x86_64-1.txt
--rw-r--r--  1 root root    125584 May  3  2010 ./slackware64/n/snownews-1.5.12-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/n/snownews-1.5.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       510 Apr  5 06:27 ./slackware64/n/stunnel-4.35-x86_64-1.txt
--rw-r--r--  1 root root    130884 Apr  5 06:27 ./slackware64/n/stunnel-4.35-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  5 06:27 ./slackware64/n/stunnel-4.35-x86_64-1.txz.asc
--rw-r--r--  1 root root      1781 Mar 25 22:06 ./slackware64/n/tagfile
--rw-r--r--  1 root root       649 Oct 13  2008 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txt
--rw-r--r--  1 root root     78592 Oct 13  2008 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 13  2008 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txz.asc
--rw-r--r--  1 root root       450 Aug  5  2010 ./slackware64/n/tcpdump-4.1.1-x86_64-1.txt
--rw-r--r--  1 root root    376416 Aug  5  2010 ./slackware64/n/tcpdump-4.1.1-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug  5  2010 ./slackware64/n/tcpdump-4.1.1-x86_64-1.txz.asc
--rw-r--r--  1 root root       557 May 23  2009 ./slackware64/n/telnet-0.17-x86_64-2.txt
--rw-r--r--  1 root root     63900 May 23  2009 ./slackware64/n/telnet-0.17-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/telnet-0.17-x86_64-2.txz.asc
--rw-r--r--  1 root root       555 May  3  2010 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txt
--rw-r--r--  1 root root     49348 May  3  2010 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txz
--rw-r--r--  1 root root       198 May  3  2010 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txz.asc
--rw-r--r--  1 root root       490 Feb 24 23:09 ./slackware64/n/tin-1.8.3-x86_64-2.txt
--rw-r--r--  1 root root    529352 Feb 24 23:09 ./slackware64/n/tin-1.8.3-x86_64-2.txz
--rw-r--r--  1 root root       198 Feb 24 23:09 ./slackware64/n/tin-1.8.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       508 Mar 25 06:03 ./slackware64/n/traceroute-2.0.17-x86_64-1.txt
--rw-r--r--  1 root root     48028 Mar 25 06:03 ./slackware64/n/traceroute-2.0.17-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 06:03 ./slackware64/n/traceroute-2.0.17-x86_64-1.txz.asc
--rw-r--r--  1 root root       290 May 23  2009 ./slackware64/n/trn-3.6-x86_64-2.txt
--rw-r--r--  1 root root    188992 May 23  2009 ./slackware64/n/trn-3.6-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/trn-3.6-x86_64-2.txz.asc
--rw-r--r--  1 root root       282 Oct 31  2008 ./slackware64/n/uucp-1.07-x86_64-1.txt
--rw-r--r--  1 root root    376540 Oct 31  2008 ./slackware64/n/uucp-1.07-x86_64-1.txz
--rw-r--r--  1 root root       197 Oct 31  2008 ./slackware64/n/uucp-1.07-x86_64-1.txz.asc
--rw-r--r--  1 root root       433 Oct 31  2008 ./slackware64/n/vlan-1.9-x86_64-2.txt
--rw-r--r--  1 root root     24048 Oct 31  2008 ./slackware64/n/vlan-1.9-x86_64-2.txz
--rw-r--r--  1 root root       197 Oct 31  2008 ./slackware64/n/vlan-1.9-x86_64-2.txz.asc
--rw-r--r--  1 root root       496 Feb 28 03:37 ./slackware64/n/vsftpd-2.3.4-x86_64-1.txt
--rw-r--r--  1 root root    121120 Feb 28 03:37 ./slackware64/n/vsftpd-2.3.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Feb 28 03:37 ./slackware64/n/vsftpd-2.3.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       398 Feb  9  2010 ./slackware64/n/wget-1.12-x86_64-1.txt
--rw-r--r--  1 root root    444808 Feb  9  2010 ./slackware64/n/wget-1.12-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb  9  2010 ./slackware64/n/wget-1.12-x86_64-1.txz.asc
--rw-r--r--  1 root root       385 Mar 25 21:13 ./slackware64/n/whois-5.0.11-x86_64-1.txt
--rw-r--r--  1 root root     44876 Mar 25 21:13 ./slackware64/n/whois-5.0.11-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar 25 21:13 ./slackware64/n/whois-5.0.11-x86_64-1.txz.asc
--rw-r--r--  1 root root       682 Jan  3  2010 ./slackware64/n/wireless-tools-29-x86_64-6.txt
--rw-r--r--  1 root root    130976 Jan  3  2010 ./slackware64/n/wireless-tools-29-x86_64-6.txz
--rw-r--r--  1 root root       197 Jan  3  2010 ./slackware64/n/wireless-tools-29-x86_64-6.txz.asc
--rw-r--r--  1 root root       603 Mar 20 04:10 ./slackware64/n/wpa_supplicant-0.7.3-x86_64-3.txt
--rw-r--r--  1 root root    538024 Mar 20 04:10 ./slackware64/n/wpa_supplicant-0.7.3-x86_64-3.txz
--rw-r--r--  1 root root       198 Mar 20 04:10 ./slackware64/n/wpa_supplicant-0.7.3-x86_64-3.txz.asc
--rw-r--r--  1 root root       407 Mar  8 18:34 ./slackware64/n/yptools-2.12-x86_64-2.txt
--rw-r--r--  1 root root    179200 Mar  8 18:34 ./slackware64/n/yptools-2.12-x86_64-2.txz
--rw-r--r--  1 root root       198 Mar  8 18:34 ./slackware64/n/yptools-2.12-x86_64-2.txz.asc
--rw-r--r--  1 root root       289 May 23  2009 ./slackware64/n/ytalk-3.3.0-x86_64-2.txt
--rw-r--r--  1 root root     49704 May 23  2009 ./slackware64/n/ytalk-3.3.0-x86_64-2.txz
--rw-r--r--  1 root root       197 May 23  2009 ./slackware64/n/ytalk-3.3.0-x86_64-2.txz.asc
--rw-r--r--  1 root root       651 Nov  4  2008 ./slackware64/n/zd1211-firmware-1.4-fw-1.txt
--rw-r--r--  1 root root     33896 Nov  4  2008 ./slackware64/n/zd1211-firmware-1.4-fw-1.txz
--rw-r--r--  1 root root       197 Nov  4  2008 ./slackware64/n/zd1211-firmware-1.4-fw-1.txz.asc
-drwxr-xr-x  2 root root      4096 May 17  2010 ./slackware64/t
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/t/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/t/install.end
--rw-r--r--  1 root root      1157 Mar  1  2010 ./slackware64/t/maketag
--rw-r--r--  1 root root      1157 Mar  1  2010 ./slackware64/t/maketag.ez
--rw-r--r--  1 root root        46 Mar  1  2010 ./slackware64/t/tagfile
--rw-r--r--  1 root root       338 May 17  2010 ./slackware64/t/tetex-3.0-x86_64-8.txt
--rw-r--r--  1 root root  36585468 May 17  2010 ./slackware64/t/tetex-3.0-x86_64-8.txz
--rw-r--r--  1 root root       198 May 17  2010 ./slackware64/t/tetex-3.0-x86_64-8.txz.asc
--rw-r--r--  1 root root       524 May 17  2010 ./slackware64/t/tetex-doc-3.0-x86_64-8.txt
--rw-r--r--  1 root root  43929492 May 17  2010 ./slackware64/t/tetex-doc-3.0-x86_64-8.txz
--rw-r--r--  1 root root       198 May 17  2010 ./slackware64/t/tetex-doc-3.0-x86_64-8.txz.asc
--rw-r--r--  1 root root       444 Feb 20  2010 ./slackware64/t/transfig-3.2.4-x86_64-3.txt
--rw-r--r--  1 root root    209952 Feb 20  2010 ./slackware64/t/transfig-3.2.4-x86_64-3.txz
--rw-r--r--  1 root root       197 Feb 20  2010 ./slackware64/t/transfig-3.2.4-x86_64-3.txz.asc
--rw-r--r--  1 root root       431 Feb 21  2010 ./slackware64/t/xfig-3.2.4-x86_64-5.txt
--rw-r--r--  1 root root   3014444 Feb 21  2010 ./slackware64/t/xfig-3.2.4-x86_64-5.txz
--rw-r--r--  1 root root       197 Feb 21  2010 ./slackware64/t/xfig-3.2.4-x86_64-5.txz.asc
-drwxr-xr-x  2 root root      4096 Nov 14 01:32 ./slackware64/tcl
--rw-r--r--  1 root root       533 Aug 12  2010 ./slackware64/tcl/expect-5.44.1.15-x86_64-1.txt
--rw-r--r--  1 root root    301616 Aug 12  2010 ./slackware64/tcl/expect-5.44.1.15-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 12  2010 ./slackware64/tcl/expect-5.44.1.15-x86_64-1.txz.asc
--rw-r--r--  1 root root       469 Nov  6  2008 ./slackware64/tcl/hfsutils-3.2.6-x86_64-4.txt
--rw-r--r--  1 root root    140068 Nov  6  2008 ./slackware64/tcl/hfsutils-3.2.6-x86_64-4.txz
--rw-r--r--  1 root root       197 Nov  6  2008 ./slackware64/tcl/hfsutils-3.2.6-x86_64-4.txz.asc
--rwxr-xr-x  1 root root      2897 Jun 24  2009 ./slackware64/tcl/install-packages
--rw-r--r--  1 root root       446 Sep 18  2006 ./slackware64/tcl/install.end
--rw-r--r--  1 root root      1285 Mar  1  2010 ./slackware64/tcl/maketag
--rw-r--r--  1 root root      1285 Mar  1  2010 ./slackware64/tcl/maketag.ez
--rw-r--r--  1 root root        56 Mar  1  2010 ./slackware64/tcl/tagfile
--rw-r--r--  1 root root       259 Nov  4 00:43 ./slackware64/tcl/tcl-8.5.9-x86_64-1.txt
--rw-r--r--  1 root root   1727440 Nov  4 00:43 ./slackware64/tcl/tcl-8.5.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  4 00:43 ./slackware64/tcl/tcl-8.5.9-x86_64-1.txz.asc
--rw-r--r--  1 root root       555 Dec  7  2009 ./slackware64/tcl/tclx-8.4-x86_64-3.txt
--rw-r--r--  1 root root    113312 Dec  7  2009 ./slackware64/tcl/tclx-8.4-x86_64-3.txz
--rw-r--r--  1 root root       197 Dec  7  2009 ./slackware64/tcl/tclx-8.4-x86_64-3.txz.asc
--rw-r--r--  1 root root       406 Dec  7  2009 ./slackware64/tcl/tix-8.4.3-x86_64-2.txt
--rw-r--r--  1 root root    538204 Dec  7  2009 ./slackware64/tcl/tix-8.4.3-x86_64-2.txz
--rw-r--r--  1 root root       197 Dec  7  2009 ./slackware64/tcl/tix-8.4.3-x86_64-2.txz.asc
--rw-r--r--  1 root root       198 Nov  4 00:45 ./slackware64/tcl/tk-8.5.9-x86_64-1.txt
--rw-r--r--  1 root root   1673308 Nov  4 00:45 ./slackware64/tcl/tk-8.5.9-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov  4 00:45 ./slackware64/tcl/tk-8.5.9-x86_64-1.txz.asc
-drwxr-xr-x  2 root root     65536 Apr 16 04:36 ./slackware64/x
--rw-r--r--  1 root root       258 Aug 12  2010 ./slackware64/x/anthy-9100h-x86_64-1.txt
--rw-r--r--  1 root root   5083544 Aug 12  2010 ./slackware64/x/anthy-9100h-x86_64-1.txz
--rw-r--r--  1 root root       198 Aug 12  2010 ./slackware64/x/anthy-9100h-x86_64-1.txz.asc
--rw-r--r--  1 root root       270 Nov 13 18:55 ./slackware64/x/appres-1.0.3-x86_64-1.txt
--rw-r--r--  1 root root     14196 Nov 13 18:55 ./slackware64/x/appres-1.0.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:55 ./slackware64/x/appres-1.0.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       296 Nov 13 18:55 ./slackware64/x/bdftopcf-1.0.3-x86_64-1.txt
--rw-r--r--  1 root root     14176 Nov 13 18:55 ./slackware64/x/bdftopcf-1.0.3-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:55 ./slackware64/x/bdftopcf-1.0.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       335 Nov 13 18:55 ./slackware64/x/beforelight-1.0.4-x86_64-1.txt
--rw-r--r--  1 root root     15228 Nov 13 18:55 ./slackware64/x/beforelight-1.0.4-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:55 ./slackware64/x/beforelight-1.0.4-x86_64-1.txz.asc
--rw-r--r--  1 root root       348 Nov 13 18:46 ./slackware64/x/bigreqsproto-1.1.1-noarch-1.txt
--rw-r--r--  1 root root     13804 Nov 13 18:46 ./slackware64/x/bigreqsproto-1.1.1-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:46 ./slackware64/x/bigreqsproto-1.1.1-noarch-1.txz.asc
--rw-r--r--  1 root root       270 Nov 13 18:55 ./slackware64/x/bitmap-1.0.5-x86_64-1.txt
--rw-r--r--  1 root root     59752 Nov 13 18:55 ./slackware64/x/bitmap-1.0.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:55 ./slackware64/x/bitmap-1.0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       270 Apr  2 21:18 ./slackware64/x/compiz-0.8.8-x86_64-1.txt
--rw-r--r--  1 root root    805552 Apr  2 21:18 ./slackware64/x/compiz-0.8.8-x86_64-1.txz
--rw-r--r--  1 root root       198 Apr  2 21:18 ./slackware64/x/compiz-0.8.8-x86_64-1.txz.asc
--rw-r--r--  1 root root       374 Nov 13 18:46 ./slackware64/x/compositeproto-0.4.2-noarch-1.txt
--rw-r--r--  1 root root     15416 Nov 13 18:46 ./slackware64/x/compositeproto-0.4.2-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:46 ./slackware64/x/compositeproto-0.4.2-noarch-1.txz.asc
--rw-r--r--  1 root root       335 Nov 13 18:46 ./slackware64/x/damageproto-1.2.1-noarch-1.txt
--rw-r--r--  1 root root     12556 Nov 13 18:46 ./slackware64/x/damageproto-1.2.1-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:46 ./slackware64/x/damageproto-1.2.1-noarch-1.txz.asc
--rw-r--r--  1 root root       536 Mar 18 19:44 ./slackware64/x/dejavu-fonts-ttf-2.33-noarch-1.txt
--rw-r--r--  1 root root   2234656 Mar 18 19:44 ./slackware64/x/dejavu-fonts-ttf-2.33-noarch-1.txz
--rw-r--r--  1 root root       198 Mar 18 19:44 ./slackware64/x/dejavu-fonts-ttf-2.33-noarch-1.txz.asc
--rw-r--r--  1 root root       296 Feb  1 01:02 ./slackware64/x/dmxproto-2.3.1-noarch-1.txt
--rw-r--r--  1 root root     10900 Feb  1 01:02 ./slackware64/x/dmxproto-2.3.1-noarch-1.txz
--rw-r--r--  1 root root       198 Feb  1 01:02 ./slackware64/x/dmxproto-2.3.1-noarch-1.txz.asc
--rw-r--r--  1 root root       309 Feb 22  2010 ./slackware64/x/dri2proto-2.3-x86_64-1.txt
--rw-r--r--  1 root root     10420 Feb 22  2010 ./slackware64/x/dri2proto-2.3-x86_64-1.txz
--rw-r--r--  1 root root       197 Feb 22  2010 ./slackware64/x/dri2proto-2.3-x86_64-1.txz.asc
--rw-r--r--  1 root root       283 Nov 13 18:56 ./slackware64/x/editres-1.0.5-x86_64-1.txt
--rw-r--r--  1 root root     45400 Nov 13 18:56 ./slackware64/x/editres-1.0.5-x86_64-1.txz
--rw-r--r--  1 root root       198 Nov 13 18:56 ./slackware64/x/editres-1.0.5-x86_64-1.txz.asc
--rw-r--r--  1 root root       309 Nov 13 19:09 ./slackware64/x/encodings-1.0.4-noarch-1.txt
--rw-r--r--  1 root root    578788 Nov 13 19:09 ./slackware64/x/encodings-1.0.4-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 13 19:09 ./slackware64/x/encodings-1.0.4-noarch-1.txz.asc
--rw-r--r--  1 root root       283 Feb  1 01:02 ./slackware64/x/evieext-1.1.1-noarch-1.txt
--rw-r--r--  1 root root      9788 Feb  1 01:02 ./slackware64/x/evieext-1.1.1-noarch-1.txz
--rw-r--r--  1 root root       198 Feb  1 01:02 ./slackware64/x/evieext-1.1.1-noarch-1.txz.asc
--rw-r--r--  1 root root       322 Mar  9 04:45 ./slackware64/x/fixesproto-5.0-x86_64-1.txt
--rw-r--r--  1 root root     14528 Mar  9 04:45 ./slackware64/x/fixesproto-5.0-x86_64-1.txz
--rw-r--r--  1 root root       198 Mar  9 04:45 ./slackware64/x/fixesproto-5.0-x86_64-1.txz.asc
--rw-r--r--  1 root root       413 Nov 16 20:37 ./slackware64/x/font-adobe-100dpi-1.0.3-noarch-1.txt
--rw-r--r--  1 root root   6186912 Nov 16 20:37 ./slackware64/x/font-adobe-100dpi-1.0.3-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 16 20:37 ./slackware64/x/font-adobe-100dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--  1 root root       400 Nov 16 20:37 ./slackware64/x/font-adobe-75dpi-1.0.3-noarch-1.txt
--rw-r--r--  1 root root   5474484 Nov 16 20:37 ./slackware64/x/font-adobe-75dpi-1.0.3-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 16 20:37 ./slackware64/x/font-adobe-75dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--  1 root root       504 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-100dpi-1.0.4-noarch-1.txt
--rw-r--r--  1 root root   1469172 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-100dpi-1.0.4-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-100dpi-1.0.4-noarch-1.txz.asc
--rw-r--r--  1 root root       491 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-75dpi-1.0.4-noarch-1.txt
--rw-r--r--  1 root root   1222588 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-75dpi-1.0.4-noarch-1.txz
--rw-r--r--  1 root root       198 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-75dpi-1.0.4-noarch-1.txz.asc
--rw-r--r--  1 root root       491 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-type1-1.0.4-noarch-1.txt
--rw-r--r--  1 root root    176264 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-type1-1.0.4-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:37 ./slackware64/x/font-adobe-utopia-type1-1.0.4-noarch-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 19:10 ./slackware64/x/font-alias-1.0.3-noarch-1.txt
--rw-r--r--   1 root root      9476 Nov 13 19:10 ./slackware64/x/font-alias-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:10 ./slackware64/x/font-alias-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       400 Nov 16 20:37 ./slackware64/x/font-arabic-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     22036 Nov 16 20:37 ./slackware64/x/font-arabic-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:37 ./slackware64/x/font-arabic-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:38 ./slackware64/x/font-bh-100dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root   3786184 Nov 16 20:38 ./slackware64/x/font-bh-100dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bh-100dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Nov 16 20:38 ./slackware64/x/font-bh-75dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root   3252044 Nov 16 20:38 ./slackware64/x/font-bh-75dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bh-75dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       595 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    859668 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       582 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    750652 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 19:11 ./slackware64/x/font-bh-ttf-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    284928 Nov 13 19:11 ./slackware64/x/font-bh-ttf-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:11 ./slackware64/x/font-bh-ttf-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Nov 16 20:38 ./slackware64/x/font-bh-type1-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    531048 Nov 16 20:38 ./slackware64/x/font-bh-type1-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bh-type1-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       465 Nov 16 20:38 ./slackware64/x/font-bitstream-100dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    169368 Nov 16 20:38 ./slackware64/x/font-bitstream-100dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bitstream-100dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       452 Nov 16 20:38 ./slackware64/x/font-bitstream-75dpi-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    149204 Nov 16 20:38 ./slackware64/x/font-bitstream-75dpi-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bitstream-75dpi-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       465 Nov 16 20:38 ./slackware64/x/font-bitstream-speedo-1.0.2-noarch-1.txt
--rw-r--r--   1 root root    245556 Nov 16 20:38 ./slackware64/x/font-bitstream-speedo-1.0.2-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bitstream-speedo-1.0.2-noarch-1.txz.asc
--rw-r--r--   1 root root       452 Nov 16 20:38 ./slackware64/x/font-bitstream-type1-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    307796 Nov 16 20:38 ./slackware64/x/font-bitstream-type1-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-bitstream-type1-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       452 Nov 16 20:38 ./slackware64/x/font-cronyx-cyrillic-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    310788 Nov 16 20:38 ./slackware64/x/font-cronyx-cyrillic-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-cronyx-cyrillic-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       400 Nov 16 20:38 ./slackware64/x/font-cursor-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     13288 Nov 16 20:38 ./slackware64/x/font-cursor-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-cursor-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       400 Nov 16 20:38 ./slackware64/x/font-daewoo-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    669124 Nov 16 20:38 ./slackware64/x/font-daewoo-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-daewoo-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Nov 16 20:38 ./slackware64/x/font-dec-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     11880 Nov 16 20:38 ./slackware64/x/font-dec-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:38 ./slackware64/x/font-dec-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:39 ./slackware64/x/font-ibm-type1-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    285888 Nov 16 20:39 ./slackware64/x/font-ibm-type1-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-ibm-type1-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:39 ./slackware64/x/font-isas-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    805592 Nov 16 20:39 ./slackware64/x/font-isas-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-isas-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Nov 16 20:39 ./slackware64/x/font-jis-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    544524 Nov 16 20:39 ./slackware64/x/font-jis-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-jis-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       387 Nov 16 20:39 ./slackware64/x/font-micro-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     10008 Nov 16 20:39 ./slackware64/x/font-micro-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-micro-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       426 Nov 16 20:39 ./slackware64/x/font-misc-cyrillic-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     74616 Nov 16 20:39 ./slackware64/x/font-misc-cyrillic-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-misc-cyrillic-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       426 Nov 16 20:39 ./slackware64/x/font-misc-ethiopic-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    136536 Nov 16 20:39 ./slackware64/x/font-misc-ethiopic-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-misc-ethiopic-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       400 Nov 16 20:39 ./slackware64/x/font-misc-meltho-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    743760 Nov 16 20:39 ./slackware64/x/font-misc-meltho-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-misc-meltho-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:39 ./slackware64/x/font-misc-misc-1.1.2-noarch-1.txt
--rw-r--r--   1 root root   3522740 Nov 16 20:39 ./slackware64/x/font-misc-misc-1.1.2-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-misc-misc-1.1.2-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:39 ./slackware64/x/font-mutt-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    217564 Nov 16 20:39 ./slackware64/x/font-mutt-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-mutt-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       452 Nov 16 20:39 ./slackware64/x/font-schumacher-misc-1.1.2-noarch-1.txt
--rw-r--r--   1 root root    163056 Nov 16 20:39 ./slackware64/x/font-schumacher-misc-1.1.2-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-schumacher-misc-1.1.2-noarch-1.txz.asc
--rw-r--r--   1 root root       452 Nov 16 20:39 ./slackware64/x/font-screen-cyrillic-1.0.4-noarch-1.txt
--rw-r--r--   1 root root     17984 Nov 16 20:39 ./slackware64/x/font-screen-cyrillic-1.0.4-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-screen-cyrillic-1.0.4-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Nov 16 20:39 ./slackware64/x/font-sony-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     28432 Nov 16 20:39 ./slackware64/x/font-sony-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-sony-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Nov 16 20:39 ./slackware64/x/font-sun-misc-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     34664 Nov 16 20:39 ./slackware64/x/font-sun-misc-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-sun-misc-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 19:12 ./slackware64/x/font-util-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     35864 Nov 13 19:12 ./slackware64/x/font-util-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:12 ./slackware64/x/font-util-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       478 Nov 16 20:39 ./slackware64/x/font-winitzki-cyrillic-1.0.3-noarch-1.txt
--rw-r--r--   1 root root     13228 Nov 16 20:39 ./slackware64/x/font-winitzki-cyrillic-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-winitzki-cyrillic-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       426 Nov 16 20:39 ./slackware64/x/font-xfree86-type1-1.0.4-noarch-1.txt
--rw-r--r--   1 root root     36336 Nov 16 20:39 ./slackware64/x/font-xfree86-type1-1.0.4-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 16 20:39 ./slackware64/x/font-xfree86-type1-1.0.4-noarch-1.txz.asc
--rw-r--r--   1 root root       374 Feb 22  2010 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txt
--rw-r--r--   1 root root      5180 Feb 22  2010 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txz.asc
--rw-r--r--   1 root root       348 Feb 20  2010 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txt
--rw-r--r--   1 root root    272112 Feb 20  2010 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 20  2010 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:46 ./slackware64/x/fontsproto-2.1.1-noarch-1.txt
--rw-r--r--   1 root root     45500 Nov 13 18:46 ./slackware64/x/fontsproto-2.1.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:46 ./slackware64/x/fontsproto-2.1.1-noarch-1.txz.asc
--rw-r--r--   1 root root       322 Jun  3  2009 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     16584 Jun  3  2009 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       197 Jun  3  2009 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 18:56 ./slackware64/x/fslsfonts-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     16436 Nov 13 18:56 ./slackware64/x/fslsfonts-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:56 ./slackware64/x/fslsfonts-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:56 ./slackware64/x/fstobdf-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     16512 Nov 13 18:56 ./slackware64/x/fstobdf-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:56 ./slackware64/x/fstobdf-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Jun  3  2009 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txt
--rw-r--r--   1 root root      3016 Jun  3  2009 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz
--rw-r--r--   1 root root       197 Jun  3  2009 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz.asc
--rw-r--r--   1 root root       385 Nov  4 23:55 ./slackware64/x/glew-1.5.7-x86_64-1.txt
--rw-r--r--   1 root root    268316 Nov  4 23:55 ./slackware64/x/glew-1.5.7-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov  4 23:55 ./slackware64/x/glew-1.5.7-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:47 ./slackware64/x/glproto-1.4.12-noarch-1.txt
--rw-r--r--   1 root root     21740 Nov 13 18:47 ./slackware64/x/glproto-1.4.12-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/glproto-1.4.12-noarch-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:56 ./slackware64/x/iceauth-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     22468 Nov 13 18:56 ./slackware64/x/iceauth-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:56 ./slackware64/x/iceauth-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:56 ./slackware64/x/ico-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     21928 Nov 13 18:56 ./slackware64/x/ico-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:56 ./slackware64/x/ico-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:48 ./slackware64/x/imake-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     38624 Nov 13 18:48 ./slackware64/x/imake-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:48 ./slackware64/x/imake-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:47 ./slackware64/x/inputproto-2.0.1-noarch-1.txt
--rw-r--r--   1 root root     59340 Nov 13 18:47 ./slackware64/x/inputproto-2.0.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/inputproto-2.0.1-noarch-1.txz.asc
--rwxr-xr-x   1 root root      2897 Jun 24  2009 ./slackware64/x/install-packages
--rw-r--r--   1 root root       446 Sep 18  2006 ./slackware64/x/install.end
--rw-r--r--   1 root root       420 Feb 22  2010 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     34396 Feb 22  2010 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:47 ./slackware64/x/kbproto-1.0.5-noarch-1.txt
--rw-r--r--   1 root root     26492 Nov 13 18:47 ./slackware64/x/kbproto-1.0.5-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/kbproto-1.0.5-noarch-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:49 ./slackware64/x/libFS-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     34856 Nov 13 18:49 ./slackware64/x/libFS-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:49 ./slackware64/x/libFS-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:49 ./slackware64/x/libICE-1.0.7-x86_64-1.txt
--rw-r--r--   1 root root     94240 Nov 13 18:49 ./slackware64/x/libICE-1.0.7-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:49 ./slackware64/x/libICE-1.0.7-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:50 ./slackware64/x/libSM-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     57060 Nov 13 18:50 ./slackware64/x/libSM-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:50 ./slackware64/x/libSM-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Apr 16 03:34 ./slackware64/x/libX11-1.4.3-x86_64-2.txt
--rw-r--r--   1 root root   2310392 Apr 16 03:34 ./slackware64/x/libX11-1.4.3-x86_64-2.txz
--rw-r--r--   1 root root       198 Apr 16 03:34 ./slackware64/x/libX11-1.4.3-x86_64-2.txz.asc
--rw-r--r--   1 root root       361 Nov 13 18:51 ./slackware64/x/libXScrnSaver-1.2.1-x86_64-1.txt
--rw-r--r--   1 root root     23448 Nov 13 18:51 ./slackware64/x/libXScrnSaver-1.2.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:51 ./slackware64/x/libXScrnSaver-1.2.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:51 ./slackware64/x/libXau-1.0.6-x86_64-1.txt
--rw-r--r--   1 root root     22864 Nov 13 18:51 ./slackware64/x/libXau-1.0.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:51 ./slackware64/x/libXau-1.0.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Feb  1 01:09 ./slackware64/x/libXaw-1.0.9-x86_64-1.txt
--rw-r--r--   1 root root    363792 Feb  1 01:09 ./slackware64/x/libXaw-1.0.9-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:09 ./slackware64/x/libXaw-1.0.9-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Nov 13 18:52 ./slackware64/x/libXcomposite-0.4.3-x86_64-1.txt
--rw-r--r--   1 root root     20404 Nov 13 18:52 ./slackware64/x/libXcomposite-0.4.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXcomposite-0.4.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:52 ./slackware64/x/libXcursor-1.1.11-x86_64-1.txt
--rw-r--r--   1 root root     37120 Nov 13 18:52 ./slackware64/x/libXcursor-1.1.11-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXcursor-1.1.11-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:52 ./slackware64/x/libXdamage-1.1.3-x86_64-1.txt
--rw-r--r--   1 root root     15192 Nov 13 18:52 ./slackware64/x/libXdamage-1.1.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXdamage-1.1.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:52 ./slackware64/x/libXdmcp-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     42288 Nov 13 18:52 ./slackware64/x/libXdmcp-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXdmcp-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:52 ./slackware64/x/libXevie-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     15720 Nov 13 18:52 ./slackware64/x/libXevie-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXevie-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:52 ./slackware64/x/libXext-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root    117092 Nov 13 18:52 ./slackware64/x/libXext-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:52 ./slackware64/x/libXext-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Mar  9 04:46 ./slackware64/x/libXfixes-5.0-x86_64-1.txt
--rw-r--r--   1 root root     18612 Mar  9 04:46 ./slackware64/x/libXfixes-5.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 04:46 ./slackware64/x/libXfixes-5.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:53 ./slackware64/x/libXfont-1.4.3-x86_64-1.txt
--rw-r--r--   1 root root    137256 Nov 13 18:53 ./slackware64/x/libXfont-1.4.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:53 ./slackware64/x/libXfont-1.4.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Feb 22  2010 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txt
--rw-r--r--   1 root root     14896 Feb 22  2010 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:53 ./slackware64/x/libXft-2.2.0-x86_64-1.txt
--rw-r--r--   1 root root     56484 Nov 13 18:53 ./slackware64/x/libXft-2.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:53 ./slackware64/x/libXft-2.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Mar 27 07:40 ./slackware64/x/libXi-1.4.2-x86_64-1.txt
--rw-r--r--   1 root root    169348 Mar 27 07:40 ./slackware64/x/libXi-1.4.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 27 07:40 ./slackware64/x/libXi-1.4.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:53 ./slackware64/x/libXinerama-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     18572 Nov 13 18:53 ./slackware64/x/libXinerama-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:53 ./slackware64/x/libXinerama-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:53 ./slackware64/x/libXmu-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     90868 Nov 13 18:53 ./slackware64/x/libXmu-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:53 ./slackware64/x/libXmu-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Feb  1 01:11 ./slackware64/x/libXp-1.0.1-x86_64-1.txt
--rw-r--r--   1 root root     83328 Feb  1 01:11 ./slackware64/x/libXp-1.0.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:11 ./slackware64/x/libXp-1.0.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:54 ./slackware64/x/libXpm-3.5.9-x86_64-1.txt
--rw-r--r--   1 root root     72320 Nov 13 18:54 ./slackware64/x/libXpm-3.5.9-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXpm-3.5.9-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 18:54 ./slackware64/x/libXrandr-1.3.1-x86_64-1.txt
--rw-r--r--   1 root root     36332 Nov 13 18:54 ./slackware64/x/libXrandr-1.3.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXrandr-1.3.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:54 ./slackware64/x/libXrender-0.9.6-x86_64-1.txt
--rw-r--r--   1 root root     31684 Nov 13 18:54 ./slackware64/x/libXrender-0.9.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXrender-0.9.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:54 ./slackware64/x/libXres-1.0.5-x86_64-1.txt
--rw-r--r--   1 root root     17156 Nov 13 18:54 ./slackware64/x/libXres-1.0.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXres-1.0.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Mar 11 04:18 ./slackware64/x/libXt-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root    417576 Mar 11 04:18 ./slackware64/x/libXt-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 11 04:18 ./slackware64/x/libXt-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:54 ./slackware64/x/libXtst-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     43068 Nov 13 18:54 ./slackware64/x/libXtst-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXtst-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:54 ./slackware64/x/libXv-1.0.6-x86_64-1.txt
--rw-r--r--   1 root root     43252 Nov 13 18:54 ./slackware64/x/libXv-1.0.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXv-1.0.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:54 ./slackware64/x/libXvMC-1.0.6-x86_64-1.txt
--rw-r--r--   1 root root     29972 Nov 13 18:54 ./slackware64/x/libXvMC-1.0.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXvMC-1.0.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:54 ./slackware64/x/libXxf86dga-1.1.2-x86_64-1.txt
--rw-r--r--   1 root root     26684 Nov 13 18:54 ./slackware64/x/libXxf86dga-1.1.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:54 ./slackware64/x/libXxf86dga-1.1.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       348 Feb  1 01:12 ./slackware64/x/libXxf86misc-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     17304 Feb  1 01:12 ./slackware64/x/libXxf86misc-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:12 ./slackware64/x/libXxf86misc-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:55 ./slackware64/x/libXxf86vm-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     23268 Nov 13 18:55 ./slackware64/x/libXxf86vm-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:55 ./slackware64/x/libXxf86vm-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:55 ./slackware64/x/libdmx-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     42188 Nov 13 18:55 ./slackware64/x/libdmx-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:55 ./slackware64/x/libdmx-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       260 Jan 30 23:20 ./slackware64/x/libdrm-2.4.23-x86_64-1.txt
--rw-r--r--   1 root root     97420 Jan 30 23:20 ./slackware64/x/libdrm-2.4.23-x86_64-1.txz
--rw-r--r--   1 root root       198 Jan 30 23:20 ./slackware64/x/libdrm-2.4.23-x86_64-1.txz.asc
--rw-r--r--   1 root root       581 Mar 23 05:07 ./slackware64/x/liberation-fonts-ttf-1.06.0.20100721-noarch-3.txt
--rw-r--r--   1 root root    830028 Mar 23 05:07 ./slackware64/x/liberation-fonts-ttf-1.06.0.20100721-noarch-3.txz
--rw-r--r--   1 root root       198 Mar 23 05:07 ./slackware64/x/liberation-fonts-ttf-1.06.0.20100721-noarch-3.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:55 ./slackware64/x/libfontenc-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     23316 Nov 13 18:55 ./slackware64/x/libfontenc-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:55 ./slackware64/x/libfontenc-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       381 Mar 21 17:29 ./slackware64/x/libhangul-0.0.12-x86_64-1.txt
--rw-r--r--   1 root root   1869400 Mar 21 17:29 ./slackware64/x/libhangul-0.0.12-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 21 17:29 ./slackware64/x/libhangul-0.0.12-x86_64-1.txz.asc
--rw-r--r--   1 root root       348 Feb  7 23:10 ./slackware64/x/libpciaccess-0.12.1-x86_64-1.txt
--rw-r--r--   1 root root     32372 Feb  7 23:10 ./slackware64/x/libpciaccess-0.12.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  7 23:10 ./slackware64/x/libpciaccess-0.12.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Feb 22  2010 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txt
--rw-r--r--   1 root root      1904 Feb 22  2010 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       446 Nov 13 18:49 ./slackware64/x/libxcb-1.7-x86_64-1.txt
--rw-r--r--   1 root root    224052 Nov 13 18:49 ./slackware64/x/libxcb-1.7-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:49 ./slackware64/x/libxcb-1.7-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:55 ./slackware64/x/libxkbfile-1.0.7-x86_64-1.txt
--rw-r--r--   1 root root     76380 Nov 13 18:55 ./slackware64/x/libxkbfile-1.0.7-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:55 ./slackware64/x/libxkbfile-1.0.7-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Feb 22  2010 ./slackware64/x/listres-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     14712 Feb 22  2010 ./slackware64/x/listres-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/listres-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:48 ./slackware64/x/lndir-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     14484 Nov 13 18:48 ./slackware64/x/lndir-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:48 ./slackware64/x/lndir-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Nov 13 18:56 ./slackware64/x/luit-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     31064 Nov 13 18:56 ./slackware64/x/luit-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:56 ./slackware64/x/luit-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       416 Aug 12  2010 ./slackware64/x/m17n-lib-1.6.1-x86_64-1.txt
--rw-r--r--   1 root root   1144424 Aug 12  2010 ./slackware64/x/m17n-lib-1.6.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Aug 12  2010 ./slackware64/x/m17n-lib-1.6.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:48 ./slackware64/x/makedepend-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     24460 Nov 13 18:48 ./slackware64/x/makedepend-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:48 ./slackware64/x/makedepend-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root     22590 Feb  1 07:15 ./slackware64/x/maketag
--rw-r--r--   1 root root     22590 Feb  1 07:15 ./slackware64/x/maketag.ez
--rw-r--r--   1 root root       335 Mar 15 21:40 ./slackware64/x/mesa-7.9.2-x86_64-1.txt
--rw-r--r--   1 root root   6218480 Mar 15 21:40 ./slackware64/x/mesa-7.9.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 15 21:40 ./slackware64/x/mesa-7.9.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Feb 22  2010 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txt
--rw-r--r--   1 root root      9244 Feb 22  2010 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 18:57 ./slackware64/x/mkfontdir-1.0.6-noarch-1.txt
--rw-r--r--   1 root root     13420 Nov 13 18:57 ./slackware64/x/mkfontdir-1.0.6-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/mkfontdir-1.0.6-noarch-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:57 ./slackware64/x/mkfontscale-1.0.8-x86_64-1.txt
--rw-r--r--   1 root root     25900 Nov 13 18:57 ./slackware64/x/mkfontscale-1.0.8-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/mkfontscale-1.0.8-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:57 ./slackware64/x/oclock-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     18720 Nov 13 18:57 ./slackware64/x/oclock-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/oclock-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       337 Feb  1 01:12 ./slackware64/x/pixman-0.20.2-x86_64-1.txt
--rw-r--r--   1 root root    164776 Feb  1 01:12 ./slackware64/x/pixman-0.20.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:12 ./slackware64/x/pixman-0.20.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Feb  1 01:03 ./slackware64/x/printproto-1.0.5-noarch-1.txt
--rw-r--r--   1 root root     18220 Feb  1 01:03 ./slackware64/x/printproto-1.0.5-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:03 ./slackware64/x/printproto-1.0.5-noarch-1.txz.asc
--rw-r--r--   1 root root       367 Mar 11 04:25 ./slackware64/x/radeon_ucode-20110302-noarch-1.txt
--rw-r--r--   1 root root     26448 Mar 11 04:25 ./slackware64/x/radeon_ucode-20110302-noarch-1.txz
--rw-r--r--   1 root root       198 Mar 11 04:25 ./slackware64/x/radeon_ucode-20110302-noarch-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:47 ./slackware64/x/randrproto-1.3.2-noarch-1.txt
--rw-r--r--   1 root root     36012 Nov 13 18:47 ./slackware64/x/randrproto-1.3.2-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/randrproto-1.3.2-noarch-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:47 ./slackware64/x/recordproto-1.14.1-noarch-1.txt
--rw-r--r--   1 root root     25896 Nov 13 18:47 ./slackware64/x/recordproto-1.14.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/recordproto-1.14.1-noarch-1.txz.asc
--rw-r--r--   1 root root       335 Feb  1 01:13 ./slackware64/x/rendercheck-1.4-x86_64-1.txt
--rw-r--r--   1 root root     32820 Feb  1 01:13 ./slackware64/x/rendercheck-1.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:13 ./slackware64/x/rendercheck-1.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:47 ./slackware64/x/renderproto-0.11.1-noarch-1.txt
--rw-r--r--   1 root root     21004 Nov 13 18:47 ./slackware64/x/renderproto-0.11.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/renderproto-0.11.1-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Feb  1 01:03 ./slackware64/x/resourceproto-1.1.1-noarch-1.txt
--rw-r--r--   1 root root      9760 Feb  1 01:03 ./slackware64/x/resourceproto-1.1.1-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:03 ./slackware64/x/resourceproto-1.1.1-noarch-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:57 ./slackware64/x/rgb-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     17912 Nov 13 18:57 ./slackware64/x/rgb-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/rgb-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       403 Nov  6  2008 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txt
--rw-r--r--   1 root root   5974804 Nov  6  2008 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz
--rw-r--r--   1 root root       197 Nov  6  2008 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz.asc
--rw-r--r--   1 root root       330 Mar 19 23:12 ./slackware64/x/scim-1.4.9-x86_64-5.txt
--rw-r--r--   1 root root   1084800 Mar 19 23:12 ./slackware64/x/scim-1.4.9-x86_64-5.txz
--rw-r--r--   1 root root       198 Mar 19 23:12 ./slackware64/x/scim-1.4.9-x86_64-5.txz.asc
--rw-r--r--   1 root root       508 Jun 10  2009 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txt
--rw-r--r--   1 root root    250080 Jun 10  2009 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz
--rw-r--r--   1 root root       197 Jun 10  2009 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz.asc
--rw-r--r--   1 root root       505 Mar 19 23:19 ./slackware64/x/scim-bridge-0.4.16-x86_64-5.txt
--rw-r--r--   1 root root    118732 Mar 19 23:19 ./slackware64/x/scim-bridge-0.4.16-x86_64-5.txz
--rw-r--r--   1 root root       198 Mar 19 23:19 ./slackware64/x/scim-bridge-0.4.16-x86_64-5.txz.asc
--rw-r--r--   1 root root       611 Jun 10  2009 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txt
--rw-r--r--   1 root root     44956 Jun 10  2009 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz
--rw-r--r--   1 root root       197 Jun 10  2009 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz.asc
--rw-r--r--   1 root root       356 Jun 10  2009 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txt
--rw-r--r--   1 root root     69624 Jun 10  2009 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz
--rw-r--r--   1 root root       197 Jun 10  2009 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz.asc
--rw-r--r--   1 root root       402 Apr 20  2009 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txt
--rw-r--r--   1 root root     32356 Apr 20  2009 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz
--rw-r--r--   1 root root       197 Apr 20  2009 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       386 Jun 10  2009 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txt
--rw-r--r--   1 root root   1670432 Jun 10  2009 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz
--rw-r--r--   1 root root       197 Jun 10  2009 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz.asc
--rw-r--r--   1 root root       289 Jun 10  2009 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txt
--rw-r--r--   1 root root   3977628 Jun 10  2009 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz
--rw-r--r--   1 root root       197 Jun 10  2009 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz.asc
--rw-r--r--   1 root root       283 Jun  3  2009 ./slackware64/x/scripts-1.0.1-noarch-2.txt
--rw-r--r--   1 root root      6628 Jun  3  2009 ./slackware64/x/scripts-1.0.1-noarch-2.txz
--rw-r--r--   1 root root       197 Jun  3  2009 ./slackware64/x/scripts-1.0.1-noarch-2.txz.asc
--rw-r--r--   1 root root       374 Nov 13 18:47 ./slackware64/x/scrnsaverproto-1.2.1-noarch-1.txt
--rw-r--r--   1 root root     21000 Nov 13 18:47 ./slackware64/x/scrnsaverproto-1.2.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/scrnsaverproto-1.2.1-noarch-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:57 ./slackware64/x/sessreg-1.0.6-x86_64-1.txt
--rw-r--r--   1 root root     17800 Nov 13 18:57 ./slackware64/x/sessreg-1.0.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/sessreg-1.0.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 18:57 ./slackware64/x/setxkbmap-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     21324 Nov 13 18:57 ./slackware64/x/setxkbmap-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/setxkbmap-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:57 ./slackware64/x/showfont-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     16056 Nov 13 18:57 ./slackware64/x/showfont-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/showfont-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       473 Nov  6  2008 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txt
--rw-r--r--   1 root root     67728 Nov  6  2008 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz
--rw-r--r--   1 root root       197 Nov  6  2008 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:57 ./slackware64/x/smproxy-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     19480 Nov 13 18:57 ./slackware64/x/smproxy-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/smproxy-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root      4550 Feb  1 07:15 ./slackware64/x/tagfile
--rw-r--r--   1 root root       561 Nov  5 00:29 ./slackware64/x/tibmachuni-font-ttf-1.901b-noarch-1.txt
--rw-r--r--   1 root root    864912 Nov  5 00:29 ./slackware64/x/tibmachuni-font-ttf-1.901b-noarch-1.txz
--rw-r--r--   1 root root       198 Nov  5 00:29 ./slackware64/x/tibmachuni-font-ttf-1.901b-noarch-1.txz.asc
--rw-r--r--   1 root root       621 Nov  6  2008 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txt
--rw-r--r--   1 root root   2183528 Nov  6  2008 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz
--rw-r--r--   1 root root       197 Nov  6  2008 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz.asc
--rw-r--r--   1 root root       231 Feb  1 01:14 ./slackware64/x/twm-1.0.6-x86_64-1.txt
--rw-r--r--   1 root root    107088 Feb  1 01:14 ./slackware64/x/twm-1.0.6-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:14 ./slackware64/x/twm-1.0.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       335 Apr  6 04:46 ./slackware64/x/util-macros-1.13.0-noarch-1.txt
--rw-r--r--   1 root root     25800 Apr  6 04:46 ./slackware64/x/util-macros-1.13.0-noarch-1.txz
--rw-r--r--   1 root root       198 Apr  6 04:46 ./slackware64/x/util-macros-1.13.0-noarch-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:47 ./slackware64/x/videoproto-2.3.1-noarch-1.txt
--rw-r--r--   1 root root     15848 Nov 13 18:47 ./slackware64/x/videoproto-2.3.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/videoproto-2.3.1-noarch-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:57 ./slackware64/x/viewres-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     22984 Nov 13 18:57 ./slackware64/x/viewres-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/viewres-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       686 Apr 20  2009 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txt
--rw-r--r--   1 root root   5752036 Apr 20  2009 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz
--rw-r--r--   1 root root       197 Apr 20  2009 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz.asc
--rw-r--r--   1 root root       607 Mar 14 03:33 ./slackware64/x/x11-skel-7.4-x86_64-2.txt
--rw-r--r--   1 root root     12256 Mar 14 03:33 ./slackware64/x/x11-skel-7.4-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 14 03:33 ./slackware64/x/x11-skel-7.4-x86_64-2.txz.asc
--rw-r--r--   1 root root       283 Feb  1 01:14 ./slackware64/x/x11perf-1.5.3-x86_64-1.txt
--rw-r--r--   1 root root     67076 Feb  1 01:14 ./slackware64/x/x11perf-1.5.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:14 ./slackware64/x/x11perf-1.5.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:57 ./slackware64/x/xauth-1.0.5-x86_64-1.txt
--rw-r--r--   1 root root     31136 Nov 13 18:57 ./slackware64/x/xauth-1.0.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:57 ./slackware64/x/xauth-1.0.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       519 Apr 15 19:44 ./slackware64/x/xaw3d-20110415git-x86_64-1.txt
--rw-r--r--   1 root root    176620 Apr 15 19:44 ./slackware64/x/xaw3d-20110415git-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr 15 19:44 ./slackware64/x/xaw3d-20110415git-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Feb  1 01:14 ./slackware64/x/xbacklight-1.1.2-x86_64-1.txt
--rw-r--r--   1 root root     12940 Feb  1 01:14 ./slackware64/x/xbacklight-1.1.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:14 ./slackware64/x/xbacklight-1.1.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Feb  1 01:14 ./slackware64/x/xbiff-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     19136 Feb  1 01:14 ./slackware64/x/xbiff-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:14 ./slackware64/x/xbiff-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Feb  1 01:04 ./slackware64/x/xbitmaps-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     25968 Feb  1 01:04 ./slackware64/x/xbitmaps-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:04 ./slackware64/x/xbitmaps-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Feb  1 01:14 ./slackware64/x/xcalc-1.0.4.1-x86_64-1.txt
--rw-r--r--   1 root root     30856 Feb  1 01:14 ./slackware64/x/xcalc-1.0.4.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:14 ./slackware64/x/xcalc-1.0.4.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Feb 22  2010 ./slackware64/x/xcb-proto-1.6-noarch-1.txt
--rw-r--r--   1 root root     51536 Feb 22  2010 ./slackware64/x/xcb-proto-1.6-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xcb-proto-1.6-noarch-1.txz.asc
--rw-r--r--   1 root root       296 Feb 22  2010 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txt
--rw-r--r--   1 root root     45544 Feb 22  2010 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:58 ./slackware64/x/xclipboard-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     24856 Nov 13 18:58 ./slackware64/x/xclipboard-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xclipboard-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:58 ./slackware64/x/xclock-1.0.5-x86_64-1.txt
--rw-r--r--   1 root root     33340 Nov 13 18:58 ./slackware64/x/xclock-1.0.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xclock-1.0.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       335 Nov 13 18:47 ./slackware64/x/xcmiscproto-1.2.1-noarch-1.txt
--rw-r--r--   1 root root     13308 Nov 13 18:47 ./slackware64/x/xcmiscproto-1.2.1-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:47 ./slackware64/x/xcmiscproto-1.2.1-noarch-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:58 ./slackware64/x/xcmsdb-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     22784 Nov 13 18:58 ./slackware64/x/xcmsdb-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xcmsdb-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Mar  9 00:18 ./slackware64/x/xcompmgr-1.1.5-x86_64-2.txt
--rw-r--r--   1 root root     22220 Mar  9 00:18 ./slackware64/x/xcompmgr-1.1.5-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar  9 00:18 ./slackware64/x/xcompmgr-1.1.5-x86_64-2.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:58 ./slackware64/x/xconsole-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     20040 Nov 13 18:58 ./slackware64/x/xconsole-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xconsole-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 18:48 ./slackware64/x/xcursor-themes-1.0.3-noarch-1.txt
--rw-r--r--   1 root root    319516 Nov 13 18:48 ./slackware64/x/xcursor-themes-1.0.3-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:48 ./slackware64/x/xcursor-themes-1.0.3-noarch-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 18:58 ./slackware64/x/xcursorgen-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     16028 Nov 13 18:58 ./slackware64/x/xcursorgen-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xcursorgen-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Nov 13 18:58 ./slackware64/x/xdbedizzy-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     17356 Nov 13 18:58 ./slackware64/x/xdbedizzy-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xdbedizzy-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       476 Feb  1 06:55 ./slackware64/x/xdg-user-dirs-0.13-x86_64-1.txt
--rw-r--r--   1 root root     32976 Feb  1 06:55 ./slackware64/x/xdg-user-dirs-0.13-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 06:55 ./slackware64/x/xdg-user-dirs-0.13-x86_64-1.txz.asc
--rw-r--r--   1 root root       550 Jan 22 04:11 ./slackware64/x/xdg-utils-1.1.0_rc1-noarch-1.txt
--rw-r--r--   1 root root     53616 Jan 22 04:11 ./slackware64/x/xdg-utils-1.1.0_rc1-noarch-1.txz
--rw-r--r--   1 root root       198 Jan 22 04:11 ./slackware64/x/xdg-utils-1.1.0_rc1-noarch-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:58 ./slackware64/x/xditview-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     31080 Nov 13 18:58 ./slackware64/x/xditview-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xditview-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Apr 27  2010 ./slackware64/x/xdm-1.1.10-x86_64-1.txt
--rw-r--r--   1 root root    117264 Apr 27  2010 ./slackware64/x/xdm-1.1.10-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr 27  2010 ./slackware64/x/xdm-1.1.10-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:58 ./slackware64/x/xdpyinfo-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     27580 Nov 13 18:58 ./slackware64/x/xdpyinfo-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xdpyinfo-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:58 ./slackware64/x/xdriinfo-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     12444 Nov 13 18:58 ./slackware64/x/xdriinfo-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xdriinfo-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:58 ./slackware64/x/xedit-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root    313756 Nov 13 18:58 ./slackware64/x/xedit-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xedit-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:58 ./slackware64/x/xev-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     19960 Nov 13 18:58 ./slackware64/x/xev-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:58 ./slackware64/x/xev-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       309 Mar  9 04:45 ./slackware64/x/xextproto-7.2.0-x86_64-1.txt
--rw-r--r--   1 root root    140628 Mar  9 04:45 ./slackware64/x/xextproto-7.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 04:45 ./slackware64/x/xextproto-7.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Feb  1 01:15 ./slackware64/x/xeyes-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     19156 Feb  1 01:15 ./slackware64/x/xeyes-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:15 ./slackware64/x/xeyes-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:02 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-2.txt
--rw-r--r--   1 root root     18236 Nov 13 19:02 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-2.txz
--rw-r--r--   1 root root       198 Nov 13 19:02 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-2.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:02 ./slackware64/x/xf86-input-aiptek-1.3.1-x86_64-1.txt
--rw-r--r--   1 root root     22932 Nov 13 19:02 ./slackware64/x/xf86-input-aiptek-1.3.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:02 ./slackware64/x/xf86-input-aiptek-1.3.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Feb  1 01:18 ./slackware64/x/xf86-input-evdev-2.6.0-x86_64-1.txt
--rw-r--r--   1 root root     35944 Feb  1 01:18 ./slackware64/x/xf86-input-evdev-2.6.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:18 ./slackware64/x/xf86-input-evdev-2.6.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       439 Nov 13 19:02 ./slackware64/x/xf86-input-joystick-1.5.0-x86_64-1.txt
--rw-r--r--   1 root root     33584 Nov 13 19:02 ./slackware64/x/xf86-input-joystick-1.5.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:02 ./slackware64/x/xf86-input-joystick-1.5.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       439 Mar 20 00:08 ./slackware64/x/xf86-input-keyboard-1.6.0-x86_64-1.txt
--rw-r--r--   1 root root     25072 Mar 20 00:08 ./slackware64/x/xf86-input-keyboard-1.6.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 20 00:08 ./slackware64/x/xf86-input-keyboard-1.6.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Mar 20 00:07 ./slackware64/x/xf86-input-mouse-1.7.0-x86_64-1.txt
--rw-r--r--   1 root root     46692 Mar 20 00:07 ./slackware64/x/xf86-input-mouse-1.7.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 20 00:07 ./slackware64/x/xf86-input-mouse-1.7.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       439 Nov 13 19:03 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-2.txt
--rw-r--r--   1 root root     12792 Nov 13 19:03 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-2.txz
--rw-r--r--   1 root root       198 Nov 13 19:03 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-2.txz.asc
--rw-r--r--   1 root root       452 Mar  9 00:20 ./slackware64/x/xf86-input-synaptics-1.4.0-x86_64-1.txt
--rw-r--r--   1 root root     62128 Mar  9 00:20 ./slackware64/x/xf86-input-synaptics-1.4.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 00:20 ./slackware64/x/xf86-input-synaptics-1.4.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       426 Mar  9 00:20 ./slackware64/x/xf86-input-vmmouse-12.7.0-x86_64-1.txt
--rw-r--r--   1 root root     25292 Mar  9 00:20 ./slackware64/x/xf86-input-vmmouse-12.7.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 00:20 ./slackware64/x/xf86-input-vmmouse-12.7.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:03 ./slackware64/x/xf86-input-void-1.3.1-x86_64-1.txt
--rw-r--r--   1 root root     15332 Nov 13 19:03 ./slackware64/x/xf86-input-void-1.3.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:03 ./slackware64/x/xf86-input-void-1.3.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Mar 18 03:22 ./slackware64/x/xf86-input-wacom-0.10.11-x86_64-1.txt
--rw-r--r--   1 root root     81748 Mar 18 03:22 ./slackware64/x/xf86-input-wacom-0.10.11-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 03:22 ./slackware64/x/xf86-input-wacom-0.10.11-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:03 ./slackware64/x/xf86-video-apm-1.2.3-x86_64-1.txt
--rw-r--r--   1 root root     66136 Nov 13 19:03 ./slackware64/x/xf86-video-apm-1.2.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:03 ./slackware64/x/xf86-video-apm-1.2.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:03 ./slackware64/x/xf86-video-ark-0.7.3-x86_64-1.txt
--rw-r--r--   1 root root     19724 Nov 13 19:03 ./slackware64/x/xf86-video-ark-0.7.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:03 ./slackware64/x/xf86-video-ark-0.7.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:03 ./slackware64/x/xf86-video-ast-0.91.10-x86_64-1.txt
--rw-r--r--   1 root root     26656 Nov 13 19:03 ./slackware64/x/xf86-video-ast-0.91.10-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:03 ./slackware64/x/xf86-video-ast-0.91.10-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Mar 18 04:00 ./slackware64/x/xf86-video-ati-6.14.1-x86_64-1.txt
--rw-r--r--   1 root root    359704 Mar 18 04:00 ./slackware64/x/xf86-video-ati-6.14.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 04:00 ./slackware64/x/xf86-video-ati-6.14.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Mar  9 00:19 ./slackware64/x/xf86-video-chips-1.2.4-x86_64-1.txt
--rw-r--r--   1 root root     89720 Mar  9 00:19 ./slackware64/x/xf86-video-chips-1.2.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 00:19 ./slackware64/x/xf86-video-chips-1.2.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:04 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-3.txt
--rw-r--r--   1 root root     36416 Nov 13 19:04 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:04 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-3.txz.asc
--rw-r--r--   1 root root       400 Nov 13 19:04 ./slackware64/x/xf86-video-dummy-0.3.4-x86_64-1.txt
--rw-r--r--   1 root root     13100 Nov 13 19:04 ./slackware64/x/xf86-video-dummy-0.3.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:04 ./slackware64/x/xf86-video-dummy-0.3.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Nov 13 19:05 ./slackware64/x/xf86-video-glint-1.2.5-x86_64-1.txt
--rw-r--r--   1 root root     92956 Nov 13 19:05 ./slackware64/x/xf86-video-glint-1.2.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:05 ./slackware64/x/xf86-video-glint-1.2.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:05 ./slackware64/x/xf86-video-i128-1.3.4-x86_64-1.txt
--rw-r--r--   1 root root     32256 Nov 13 19:05 ./slackware64/x/xf86-video-i128-1.3.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:05 ./slackware64/x/xf86-video-i128-1.3.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:05 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-3.txt
--rw-r--r--   1 root root     24792 Nov 13 19:05 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:05 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-3.txz.asc
--rw-r--r--   1 root root       400 Apr 16 03:15 ./slackware64/x/xf86-video-intel-2.15.0-x86_64-1.txt
--rw-r--r--   1 root root    196176 Apr 16 03:15 ./slackware64/x/xf86-video-intel-2.15.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr 16 03:15 ./slackware64/x/xf86-video-intel-2.15.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:05 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-3.txt
--rw-r--r--   1 root root     95636 Nov 13 19:05 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:05 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-3.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:06 ./slackware64/x/xf86-video-mga-1.4.13-x86_64-1.txt
--rw-r--r--   1 root root     92784 Nov 13 19:06 ./slackware64/x/xf86-video-mga-1.4.13-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:06 ./slackware64/x/xf86-video-mga-1.4.13-x86_64-1.txz.asc
--rw-r--r--   1 root root       439 Nov 13 19:06 ./slackware64/x/xf86-video-neomagic-1.2.5-x86_64-1.txt
--rw-r--r--   1 root root     39976 Nov 13 19:06 ./slackware64/x/xf86-video-neomagic-1.2.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:06 ./slackware64/x/xf86-video-neomagic-1.2.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       426 Jan 31 03:43 ./slackware64/x/xf86-video-nouveau-8bb82312-x86_64-1.txt
--rw-r--r--   1 root root     72616 Jan 31 03:43 ./slackware64/x/xf86-video-nouveau-8bb82312-x86_64-1.txz
--rw-r--r--   1 root root       198 Jan 31 03:43 ./slackware64/x/xf86-video-nouveau-8bb82312-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Nov 13 19:06 ./slackware64/x/xf86-video-nv-2.1.18-x86_64-1.txt
--rw-r--r--   1 root root     88096 Nov 13 19:06 ./slackware64/x/xf86-video-nv-2.1.18-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:06 ./slackware64/x/xf86-video-nv-2.1.18-x86_64-1.txz.asc
--rw-r--r--   1 root root       465 Nov 13 19:06 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-2.txt
--rw-r--r--   1 root root    140796 Nov 13 19:06 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-2.txz
--rw-r--r--   1 root root       198 Nov 13 19:06 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-2.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:06 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-3.txt
--rw-r--r--   1 root root     56192 Nov 13 19:06 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:06 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-3.txz.asc
--rw-r--r--   1 root root       485 Mar 14 04:00 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-2.txt
--rw-r--r--   1 root root    201788 Mar 14 04:00 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 14 04:00 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-2.txz.asc
--rw-r--r--   1 root root       452 Nov 13 19:07 ./slackware64/x/xf86-video-rendition-4.2.4-x86_64-1.txt
--rw-r--r--   1 root root     44860 Nov 13 19:07 ./slackware64/x/xf86-video-rendition-4.2.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:07 ./slackware64/x/xf86-video-rendition-4.2.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Nov 13 19:07 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-3.txt
--rw-r--r--   1 root root     30856 Nov 13 19:07 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:07 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-3.txz.asc
--rw-r--r--   1 root root       426 Nov 13 19:07 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-3.txt
--rw-r--r--   1 root root     41860 Nov 13 19:07 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:07 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-3.txz.asc
--rw-r--r--   1 root root       413 Feb  1 01:21 ./slackware64/x/xf86-video-savage-2.3.2-x86_64-1.txt
--rw-r--r--   1 root root     73852 Feb  1 01:21 ./slackware64/x/xf86-video-savage-2.3.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:21 ./slackware64/x/xf86-video-savage-2.3.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       504 Mar  9 00:19 ./slackware64/x/xf86-video-siliconmotion-1.7.5-x86_64-1.txt
--rw-r--r--   1 root root     65852 Mar  9 00:19 ./slackware64/x/xf86-video-siliconmotion-1.7.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 00:19 ./slackware64/x/xf86-video-siliconmotion-1.7.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:07 ./slackware64/x/xf86-video-sis-0.10.3-x86_64-1.txt
--rw-r--r--   1 root root    248936 Nov 13 19:07 ./slackware64/x/xf86-video-sis-0.10.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:07 ./slackware64/x/xf86-video-sis-0.10.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:07 ./slackware64/x/xf86-video-sisusb-0.9.4-x86_64-1.txt
--rw-r--r--   1 root root     46264 Nov 13 19:07 ./slackware64/x/xf86-video-sisusb-0.9.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:07 ./slackware64/x/xf86-video-sisusb-0.9.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:08 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-3.txt
--rw-r--r--   1 root root     31684 Nov 13 19:08 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-3.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:08 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-2.txt
--rw-r--r--   1 root root     24308 Nov 13 19:08 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-2.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-2.txz.asc
--rw-r--r--   1 root root       426 Nov 13 19:08 ./slackware64/x/xf86-video-trident-1.3.4-x86_64-1.txt
--rw-r--r--   1 root root     69236 Nov 13 19:08 ./slackware64/x/xf86-video-trident-1.3.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-trident-1.3.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Nov 13 19:08 ./slackware64/x/xf86-video-tseng-1.2.4-x86_64-1.txt
--rw-r--r--   1 root root     30804 Nov 13 19:08 ./slackware64/x/xf86-video-tseng-1.2.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-tseng-1.2.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:08 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-4.txt
--rw-r--r--   1 root root     10172 Nov 13 19:08 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-4.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-4.txz.asc
--rw-r--r--   1 root root       387 Nov 13 19:08 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-3.txt
--rw-r--r--   1 root root     25724 Nov 13 19:08 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-3.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-3.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:08 ./slackware64/x/xf86-video-vmware-11.0.3-x86_64-1.txt
--rw-r--r--   1 root root     39504 Nov 13 19:08 ./slackware64/x/xf86-video-vmware-11.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-vmware-11.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       413 Nov 13 19:08 ./slackware64/x/xf86-video-voodoo-1.2.4-x86_64-1.txt
--rw-r--r--   1 root root     21428 Nov 13 19:08 ./slackware64/x/xf86-video-voodoo-1.2.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-voodoo-1.2.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Nov 13 19:08 ./slackware64/x/xf86-video-xgi-1.6.0-x86_64-1.txt
--rw-r--r--   1 root root    125108 Nov 13 19:08 ./slackware64/x/xf86-video-xgi-1.6.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:08 ./slackware64/x/xf86-video-xgi-1.6.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Feb 22  2010 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txt
--rw-r--r--   1 root root      4792 Feb 22  2010 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:59 ./slackware64/x/xf86dga-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     13352 Nov 13 18:59 ./slackware64/x/xf86dga-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xf86dga-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       348 Feb 22  2010 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txt
--rw-r--r--   1 root root      7428 Feb 22  2010 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txz.asc
--rw-r--r--   1 root root       348 Feb  1 01:03 ./slackware64/x/xf86driproto-2.1.1-noarch-1.txt
--rw-r--r--   1 root root     10904 Feb  1 01:03 ./slackware64/x/xf86driproto-2.1.1-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:03 ./slackware64/x/xf86driproto-2.1.1-noarch-1.txz.asc
--rw-r--r--   1 root root       361 Feb 22  2010 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txt
--rw-r--r--   1 root root      6148 Feb 22  2010 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txz.asc
--rw-r--r--   1 root root       400 Feb  1 01:03 ./slackware64/x/xf86vidmodeproto-2.3.1-noarch-1.txt
--rw-r--r--   1 root root     11304 Feb  1 01:03 ./slackware64/x/xf86vidmodeproto-2.3.1-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:03 ./slackware64/x/xf86vidmodeproto-2.3.1-noarch-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:59 ./slackware64/x/xfd-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     25016 Nov 13 18:59 ./slackware64/x/xfd-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xfd-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:59 ./slackware64/x/xfontsel-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     31072 Nov 13 18:59 ./slackware64/x/xfontsel-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xfontsel-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:59 ./slackware64/x/xfs-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     73640 Nov 13 18:59 ./slackware64/x/xfs-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xfs-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 18:59 ./slackware64/x/xfsinfo-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     14340 Nov 13 18:59 ./slackware64/x/xfsinfo-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xfsinfo-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:59 ./slackware64/x/xgamma-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     14660 Nov 13 18:59 ./slackware64/x/xgamma-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xgamma-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 18:59 ./slackware64/x/xgc-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     38636 Nov 13 18:59 ./slackware64/x/xgc-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xgc-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:59 ./slackware64/x/xhost-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     19384 Nov 13 18:59 ./slackware64/x/xhost-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xhost-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Feb  1 01:04 ./slackware64/x/xineramaproto-1.2.1-noarch-1.txt
--rw-r--r--   1 root root     10716 Feb  1 01:04 ./slackware64/x/xineramaproto-1.2.1-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:04 ./slackware64/x/xineramaproto-1.2.1-noarch-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 18:59 ./slackware64/x/xinit-1.3.0-x86_64-1.txt
--rw-r--r--   1 root root     29188 Nov 13 18:59 ./slackware64/x/xinit-1.3.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xinit-1.3.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       468 Nov 13 18:59 ./slackware64/x/xinput-1.5.3-x86_64-1.txt
--rw-r--r--   1 root root     34168 Nov 13 18:59 ./slackware64/x/xinput-1.5.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xinput-1.5.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Mar  9 00:18 ./slackware64/x/xkbcomp-1.2.1-x86_64-1.txt
--rw-r--r--   1 root root     97720 Mar  9 00:18 ./slackware64/x/xkbcomp-1.2.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  9 00:18 ./slackware64/x/xkbcomp-1.2.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Feb  1 01:16 ./slackware64/x/xkbevd-1.1.2-x86_64-1.txt
--rw-r--r--   1 root root     27208 Feb  1 01:16 ./slackware64/x/xkbevd-1.1.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:16 ./slackware64/x/xkbevd-1.1.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Feb  1 01:16 ./slackware64/x/xkbprint-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     51776 Feb  1 01:16 ./slackware64/x/xkbprint-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:16 ./slackware64/x/xkbprint-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 18:59 ./slackware64/x/xkbutils-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     26796 Nov 13 18:59 ./slackware64/x/xkbutils-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:59 ./slackware64/x/xkbutils-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       400 Apr  7 18:06 ./slackware64/x/xkeyboard-config-2.2.1-noarch-1.txt
--rw-r--r--   1 root root    489060 Apr  7 18:06 ./slackware64/x/xkeyboard-config-2.2.1-noarch-1.txz
--rw-r--r--   1 root root       198 Apr  7 18:06 ./slackware64/x/xkeyboard-config-2.2.1-noarch-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 19:00 ./slackware64/x/xkill-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     16860 Nov 13 19:00 ./slackware64/x/xkill-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xkill-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 19:00 ./slackware64/x/xload-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     19372 Nov 13 19:00 ./slackware64/x/xload-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xload-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 19:00 ./slackware64/x/xlogo-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     21268 Nov 13 19:00 ./slackware64/x/xlogo-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xlogo-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:00 ./slackware64/x/xlsatoms-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     14344 Nov 13 19:00 ./slackware64/x/xlsatoms-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xlsatoms-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       322 Nov 13 19:00 ./slackware64/x/xlsclients-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     17668 Nov 13 19:00 ./slackware64/x/xlsclients-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xlsclients-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:00 ./slackware64/x/xlsfonts-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     18532 Nov 13 19:00 ./slackware64/x/xlsfonts-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xlsfonts-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Nov 13 19:00 ./slackware64/x/xmag-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     27372 Nov 13 19:00 ./slackware64/x/xmag-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xmag-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Nov 13 19:00 ./slackware64/x/xman-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     47208 Nov 13 19:00 ./slackware64/x/xman-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xman-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Feb 22  2010 ./slackware64/x/xmessage-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     19764 Feb 22  2010 ./slackware64/x/xmessage-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xmessage-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 19:00 ./slackware64/x/xmh-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     81160 Nov 13 19:00 ./slackware64/x/xmh-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xmh-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       283 Nov 13 19:00 ./slackware64/x/xmodmap-1.0.5-x86_64-1.txt
--rw-r--r--   1 root root     30040 Nov 13 19:00 ./slackware64/x/xmodmap-1.0.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xmodmap-1.0.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 19:00 ./slackware64/x/xmore-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     14060 Nov 13 19:00 ./slackware64/x/xmore-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xmore-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       361 Feb  1 01:04 ./slackware64/x/xorg-cf-files-1.0.4-noarch-1.txt
--rw-r--r--   1 root root    185448 Feb  1 01:04 ./slackware64/x/xorg-cf-files-1.0.4-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:04 ./slackware64/x/xorg-cf-files-1.0.4-noarch-1.txz.asc
--rw-r--r--   1 root root       309 Feb  1 01:17 ./slackware64/x/xorg-docs-1.6-noarch-1.txt
--rw-r--r--   1 root root    254664 Feb  1 01:17 ./slackware64/x/xorg-docs-1.6-noarch-1.txz
--rw-r--r--   1 root root       198 Feb  1 01:17 ./slackware64/x/xorg-docs-1.6-noarch-1.txz.asc
--rw-r--r--   1 root root       698 Mar 18 03:51 ./slackware64/x/xorg-server-1.9.5-x86_64-1.txt
--rw-r--r--   1 root root   1924400 Mar 18 03:51 ./slackware64/x/xorg-server-1.9.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 03:51 ./slackware64/x/xorg-server-1.9.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       370 Mar 18 03:51 ./slackware64/x/xorg-server-xephyr-1.9.5-x86_64-1.txt
--rw-r--r--   1 root root    750896 Mar 18 03:51 ./slackware64/x/xorg-server-xephyr-1.9.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 03:51 ./slackware64/x/xorg-server-xephyr-1.9.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       595 Mar 18 03:51 ./slackware64/x/xorg-server-xnest-1.9.5-x86_64-1.txt
--rw-r--r--   1 root root    578116 Mar 18 03:51 ./slackware64/x/xorg-server-xnest-1.9.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 03:51 ./slackware64/x/xorg-server-xnest-1.9.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       693 Mar 18 03:51 ./slackware64/x/xorg-server-xvfb-1.9.5-x86_64-1.txt
--rw-r--r--   1 root root    670956 Mar 18 03:51 ./slackware64/x/xorg-server-xvfb-1.9.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 03:51 ./slackware64/x/xorg-server-xvfb-1.9.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       426 Apr  6 04:29 ./slackware64/x/xorg-sgml-doctools-1.7-x86_64-1.txt
--rw-r--r--   1 root root     20304 Apr  6 04:29 ./slackware64/x/xorg-sgml-doctools-1.7-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr  6 04:29 ./slackware64/x/xorg-sgml-doctools-1.7-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Feb 22  2010 ./slackware64/x/xpr-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     33188 Feb 22  2010 ./slackware64/x/xpr-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xpr-1.0.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       257 Nov 13 19:00 ./slackware64/x/xprop-1.2.0-x86_64-1.txt
--rw-r--r--   1 root root     33848 Nov 13 19:00 ./slackware64/x/xprop-1.2.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xprop-1.2.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Mar 27 07:42 ./slackware64/x/xproto-7.0.21-noarch-1.txt
--rw-r--r--   1 root root    192272 Mar 27 07:42 ./slackware64/x/xproto-7.0.21-noarch-1.txz
--rw-r--r--   1 root root       198 Mar 27 07:42 ./slackware64/x/xproto-7.0.21-noarch-1.txz.asc
--rw-r--r--   1 root root       244 Feb 22  2010 ./slackware64/x/xpyb-1.2-x86_64-1.txt
--rw-r--r--   1 root root    109120 Feb 22  2010 ./slackware64/x/xpyb-1.2-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xpyb-1.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 19:00 ./slackware64/x/xrandr-1.3.4-x86_64-1.txt
--rw-r--r--   1 root root     47376 Nov 13 19:00 ./slackware64/x/xrandr-1.3.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:00 ./slackware64/x/xrandr-1.3.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Apr  6 04:27 ./slackware64/x/xrdb-1.0.9-x86_64-1.txt
--rw-r--r--   1 root root     23584 Apr  6 04:27 ./slackware64/x/xrdb-1.0.9-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr  6 04:27 ./slackware64/x/xrdb-1.0.9-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:01 ./slackware64/x/xrefresh-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     14884 Nov 13 19:01 ./slackware64/x/xrefresh-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xrefresh-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 19:01 ./slackware64/x/xscope-1.3-x86_64-1.txt
--rw-r--r--   1 root root     99736 Nov 13 19:01 ./slackware64/x/xscope-1.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xscope-1.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Nov 13 19:01 ./slackware64/x/xset-1.2.1-x86_64-1.txt
--rw-r--r--   1 root root     32128 Nov 13 19:01 ./slackware64/x/xset-1.2.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xset-1.2.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:01 ./slackware64/x/xsetroot-1.1.0-x86_64-1.txt
--rw-r--r--   1 root root     18128 Nov 13 19:01 ./slackware64/x/xsetroot-1.1.0-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xsetroot-1.1.0-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 19:01 ./slackware64/x/xsm-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     52892 Nov 13 19:01 ./slackware64/x/xsm-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xsm-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:01 ./slackware64/x/xstdcmap-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     15508 Nov 13 19:01 ./slackware64/x/xstdcmap-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xstdcmap-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       308 Feb 24 17:55 ./slackware64/x/xterm-267-x86_64-1.txt
--rw-r--r--   1 root root    242440 Feb 24 17:55 ./slackware64/x/xterm-267-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 24 17:55 ./slackware64/x/xterm-267-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 18:55 ./slackware64/x/xtrans-1.2.6-noarch-1.txt
--rw-r--r--   1 root root     63524 Nov 13 18:55 ./slackware64/x/xtrans-1.2.6-noarch-1.txz
--rw-r--r--   1 root root       198 Nov 13 18:55 ./slackware64/x/xtrans-1.2.6-noarch-1.txz.asc
--rw-r--r--   1 root root       296 Feb 22  2010 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txt
--rw-r--r--   1 root root     26252 Feb 22  2010 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 22  2010 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       270 Nov 13 19:01 ./slackware64/x/xvinfo-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     14972 Nov 13 19:01 ./slackware64/x/xvinfo-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xvinfo-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       231 Nov 13 19:01 ./slackware64/x/xwd-1.0.4-x86_64-1.txt
--rw-r--r--   1 root root     24596 Nov 13 19:01 ./slackware64/x/xwd-1.0.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xwd-1.0.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       296 Nov 13 19:01 ./slackware64/x/xwininfo-1.1.1-x86_64-1.txt
--rw-r--r--   1 root root     32140 Nov 13 19:01 ./slackware64/x/xwininfo-1.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xwininfo-1.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       244 Nov 13 19:01 ./slackware64/x/xwud-1.0.3-x86_64-1.txt
--rw-r--r--   1 root root     22528 Nov 13 19:01 ./slackware64/x/xwud-1.0.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov 13 19:01 ./slackware64/x/xwud-1.0.3-x86_64-1.txz.asc
-drwxr-xr-x   2 root root     12288 Apr 21 03:50 ./slackware64/xap
--rw-r--r--   1 root root       479 Dec 18 18:47 ./slackware64/xap/MPlayer-20101218-x86_64-1.txt
--rw-r--r--   1 root root   9132276 Dec 18 18:47 ./slackware64/xap/MPlayer-20101218-x86_64-1.txz
--rw-r--r--   1 root root       198 Dec 18 18:47 ./slackware64/xap/MPlayer-20101218-x86_64-1.txz.asc
--rw-r--r--   1 root root       615 Mar 11 20:54 ./slackware64/xap/audacious-2.4.4-x86_64-1.txt
--rw-r--r--   1 root root    431092 Mar 11 20:54 ./slackware64/xap/audacious-2.4.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 11 20:54 ./slackware64/xap/audacious-2.4.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       424 Mar 11 21:06 ./slackware64/xap/audacious-plugins-2.4.4-x86_64-1.txt
--rw-r--r--   1 root root   1391076 Mar 11 21:06 ./slackware64/xap/audacious-plugins-2.4.4-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 11 21:06 ./slackware64/xap/audacious-plugins-2.4.4-x86_64-1.txz.asc
--rw-r--r--   1 root root       441 Feb 28 03:35 ./slackware64/xap/blackbox-0.70.1-x86_64-4.txt
--rw-r--r--   1 root root    297476 Feb 28 03:35 ./slackware64/xap/blackbox-0.70.1-x86_64-4.txz
--rw-r--r--   1 root root       198 Feb 28 03:35 ./slackware64/xap/blackbox-0.70.1-x86_64-4.txz.asc
--rw-r--r--   1 root root       424 Mar  7 19:31 ./slackware64/xap/blueman-r708-x86_64-1.txt
--rw-r--r--   1 root root    539788 Mar  7 19:31 ./slackware64/xap/blueman-r708-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar  7 19:31 ./slackware64/xap/blueman-r708-x86_64-1.txz.asc
--rw-r--r--   1 root root       652 Feb 19  2010 ./slackware64/xap/electricsheep-20090306-x86_64-3.txt
--rw-r--r--   1 root root   2598696 Feb 19  2010 ./slackware64/xap/electricsheep-20090306-x86_64-3.txz
--rw-r--r--   1 root root       197 Feb 19  2010 ./slackware64/xap/electricsheep-20090306-x86_64-3.txz.asc
--rw-r--r--   1 root root       229 Feb 28 01:17 ./slackware64/xap/fluxbox-1.3.1-x86_64-1.txt
--rw-r--r--   1 root root    724508 Feb 28 01:17 ./slackware64/xap/fluxbox-1.3.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 28 01:17 ./slackware64/xap/fluxbox-1.3.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       337 Feb 28 03:46 ./slackware64/xap/fvwm-2.4.20-x86_64-2.txt
--rw-r--r--   1 root root   1016848 Feb 28 03:46 ./slackware64/xap/fvwm-2.4.20-x86_64-2.txz
--rw-r--r--   1 root root       198 Feb 28 03:46 ./slackware64/xap/fvwm-2.4.20-x86_64-2.txz.asc
--rw-r--r--   1 root root       319 Mar 11 18:51 ./slackware64/xap/geeqie-1.0-x86_64-3.txt
--rw-r--r--   1 root root    785488 Mar 11 18:51 ./slackware64/xap/geeqie-1.0-x86_64-3.txz
--rw-r--r--   1 root root       198 Mar 11 18:51 ./slackware64/xap/geeqie-1.0-x86_64-3.txz.asc
--rw-r--r--   1 root root       444 May 23  2009 ./slackware64/xap/gftp-2.0.19-x86_64-2.txt
--rw-r--r--   1 root root    589988 May 23  2009 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz
--rw-r--r--   1 root root       197 May 23  2009 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz.asc
--rw-r--r--   1 root root       473 Mar 22 22:12 ./slackware64/xap/gimp-2.6.11-x86_64-3.txt
--rw-r--r--   1 root root  10236712 Mar 22 22:12 ./slackware64/xap/gimp-2.6.11-x86_64-3.txz
--rw-r--r--   1 root root       198 Mar 22 22:12 ./slackware64/xap/gimp-2.6.11-x86_64-3.txz.asc
--rw-r--r--   1 root root       513 Feb 12 19:40 ./slackware64/xap/gkrellm-2.3.5-x86_64-1.txt
--rw-r--r--   1 root root    535872 Feb 12 19:40 ./slackware64/xap/gkrellm-2.3.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 12 19:40 ./slackware64/xap/gkrellm-2.3.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       337 Mar 21 22:48 ./slackware64/xap/gnuchess-5.08-x86_64-2.txt
--rw-r--r--   1 root root   1057424 Mar 21 22:48 ./slackware64/xap/gnuchess-5.08-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 21 22:48 ./slackware64/xap/gnuchess-5.08-x86_64-2.txz.asc
--rw-r--r--   1 root root       647 Mar 18 04:38 ./slackware64/xap/gnuplot-4.4.3-x86_64-1.txt
--rw-r--r--   1 root root   1241208 Mar 18 04:38 ./slackware64/xap/gnuplot-4.4.3-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 18 04:38 ./slackware64/xap/gnuplot-4.4.3-x86_64-1.txz.asc
--rw-r--r--   1 root root       209 Mar 19 22:37 ./slackware64/xap/gucharmap-2.33.2-x86_64-1.txt
--rw-r--r--   1 root root   2132108 Mar 19 22:37 ./slackware64/xap/gucharmap-2.33.2-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 19 22:37 ./slackware64/xap/gucharmap-2.33.2-x86_64-1.txz.asc
--rw-r--r--   1 root root       370 Apr 14 17:17 ./slackware64/xap/gv-3.7.1-x86_64-2.txt
--rw-r--r--   1 root root    208200 Apr 14 17:17 ./slackware64/xap/gv-3.7.1-x86_64-2.txz
--rw-r--r--   1 root root       198 Apr 14 17:17 ./slackware64/xap/gv-3.7.1-x86_64-2.txz.asc
--rw-r--r--   1 root root       540 Jan 26 19:03 ./slackware64/xap/imagemagick-6.6.6_10-x86_64-1.txt
--rw-r--r--   1 root root   4875824 Jan 26 19:03 ./slackware64/xap/imagemagick-6.6.6_10-x86_64-1.txz
--rw-r--r--   1 root root       198 Jan 26 19:03 ./slackware64/xap/imagemagick-6.6.6_10-x86_64-1.txz.asc
--rwxr-xr-x   1 root root      2897 Jun 24  2009 ./slackware64/xap/install-packages
--rw-r--r--   1 root root       446 Sep 18  2006 ./slackware64/xap/install.end
--rw-r--r--   1 root root      4205 Nov 29 18:41 ./slackware64/xap/maketag
--rw-r--r--   1 root root      4205 Nov 29 18:41 ./slackware64/xap/maketag.ez
--rw-r--r--   1 root root       527 Mar 23 19:39 ./slackware64/xap/mozilla-firefox-4.0-x86_64-2.txt
--rw-r--r--   1 root root  12981552 Mar 23 19:39 ./slackware64/xap/mozilla-firefox-4.0-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 23 19:39 ./slackware64/xap/mozilla-firefox-4.0-x86_64-2.txz.asc
--rw-r--r--   1 root root       702 Mar 23 19:57 ./slackware64/xap/mozilla-thunderbird-3.1.9-x86_64-2.txt
--rw-r--r--   1 root root  10439992 Mar 23 19:57 ./slackware64/xap/mozilla-thunderbird-3.1.9-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 23 19:57 ./slackware64/xap/mozilla-thunderbird-3.1.9-x86_64-2.txz.asc
--rw-r--r--   1 root root       267 Feb 20 19:22 ./slackware64/xap/pan-0.134-x86_64-1.txt
--rw-r--r--   1 root root    780556 Feb 20 19:22 ./slackware64/xap/pan-0.134-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 20 19:22 ./slackware64/xap/pan-0.134-x86_64-1.txz.asc
--rw-r--r--   1 root root       469 Mar 11 18:34 ./slackware64/xap/pidgin-2.7.11-x86_64-1.txt
--rw-r--r--   1 root root   7246136 Mar 11 18:34 ./slackware64/xap/pidgin-2.7.11-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 11 18:34 ./slackware64/xap/pidgin-2.7.11-x86_64-1.txz.asc
--rw-r--r--   1 root root       395 Apr 21 01:32 ./slackware64/xap/rdesktop-1.6.0-x86_64-2.txt
--rw-r--r--   1 root root    132388 Apr 21 01:32 ./slackware64/xap/rdesktop-1.6.0-x86_64-2.txz
--rw-r--r--   1 root root       198 Apr 21 01:32 ./slackware64/xap/rdesktop-1.6.0-x86_64-2.txz.asc
--rw-r--r--   1 root root       425 Jun  9  2009 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txt
--rw-r--r--   1 root root    162500 Jun  9  2009 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz
--rw-r--r--   1 root root       197 Jun  9  2009 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz.asc
--rw-r--r--   1 root root       321 Mar 18 19:57 ./slackware64/xap/sane-1.0.22-x86_64-2.txt
--rw-r--r--   1 root root   2750500 Mar 18 19:57 ./slackware64/xap/sane-1.0.22-x86_64-2.txz
--rw-r--r--   1 root root       198 Mar 18 19:57 ./slackware64/xap/sane-1.0.22-x86_64-2.txz.asc
--rw-r--r--   1 root root       434 Apr 11 01:34 ./slackware64/xap/seamonkey-2.1b3-x86_64-2.txt
--rw-r--r--   1 root root  22453456 Apr 11 01:34 ./slackware64/xap/seamonkey-2.1b3-x86_64-2.txz
--rw-r--r--   1 root root       198 Apr 11 01:34 ./slackware64/xap/seamonkey-2.1b3-x86_64-2.txz.asc
--rw-r--r--   1 root root       609 Mar 16  2009 ./slackware64/xap/seyon-2.20c-x86_64-3.txt
--rw-r--r--   1 root root    113164 Mar 16  2009 ./slackware64/xap/seyon-2.20c-x86_64-3.txz
--rw-r--r--   1 root root       197 Mar 16  2009 ./slackware64/xap/seyon-2.20c-x86_64-3.txz.asc
--rw-r--r--   1 root root       617 Nov 29 18:41 ./slackware64/xap/tagfile
--rw-r--r--   1 root root       488 Mar 16  2009 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txt
--rw-r--r--   1 root root     70548 Mar 16  2009 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz
--rw-r--r--   1 root root       197 Mar 16  2009 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz.asc
--rw-r--r--   1 root root       505 Apr  4 05:17 ./slackware64/xap/vim-gvim-7.3.154-x86_64-1.txt
--rw-r--r--   1 root root   1543812 Apr  4 05:17 ./slackware64/xap/vim-gvim-7.3.154-x86_64-1.txz
--rw-r--r--   1 root root       198 Apr  4 05:17 ./slackware64/xap/vim-gvim-7.3.154-x86_64-1.txz.asc
--rw-r--r--   1 root root       455 Feb 28 03:44 ./slackware64/xap/windowmaker-20060427cvs-x86_64-4.txt
--rw-r--r--   1 root root   1808464 Feb 28 03:44 ./slackware64/xap/windowmaker-20060427cvs-x86_64-4.txz
--rw-r--r--   1 root root       198 Feb 28 03:44 ./slackware64/xap/windowmaker-20060427cvs-x86_64-4.txz.asc
--rw-r--r--   1 root root       308 Feb  1 06:39 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-2.txt
--rw-r--r--   1 root root     24736 Feb  1 06:39 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-2.txz
--rw-r--r--   1 root root       198 Feb  1 06:39 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-2.txz.asc
--rw-r--r--   1 root root       310 Nov  6  2008 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txt
--rw-r--r--   1 root root    508772 Nov  6  2008 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz
--rw-r--r--   1 root root       197 Nov  6  2008 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz.asc
--rw-r--r--   1 root root       420 Oct 16  2010 ./slackware64/xap/xaos-3.5-x86_64-1.txt
--rw-r--r--   1 root root    514032 Oct 16  2010 ./slackware64/xap/xaos-3.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Oct 16  2010 ./slackware64/xap/xaos-3.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       164 Jan 26 17:42 ./slackware64/xap/xchat-2.8.8-x86_64-3.txt
--rw-r--r--   1 root root   1821744 Jan 26 17:42 ./slackware64/xap/xchat-2.8.8-x86_64-3.txz
--rw-r--r--   1 root root       198 Jan 26 17:42 ./slackware64/xap/xchat-2.8.8-x86_64-3.txz.asc
--rw-r--r--   1 root root       309 Mar 29 21:38 ./slackware64/xap/xfce-4.6.2-x86_64-5.txt
--rw-r--r--   1 root root  12597672 Mar 29 21:38 ./slackware64/xap/xfce-4.6.2-x86_64-5.txz
--rw-r--r--   1 root root       198 Mar 29 21:38 ./slackware64/xap/xfce-4.6.2-x86_64-5.txz.asc
--rw-r--r--   1 root root       441 Feb 16 03:44 ./slackware64/xap/xfce4-notifyd-0.1.1-x86_64-1.txt
--rw-r--r--   1 root root     49248 Feb 16 03:44 ./slackware64/xap/xfce4-notifyd-0.1.1-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 16 03:44 ./slackware64/xap/xfce4-notifyd-0.1.1-x86_64-1.txz.asc
--rw-r--r--   1 root root       472 Mar 13  2010 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txt
--rw-r--r--   1 root root    478920 Mar 13  2010 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 13  2010 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txz.asc
--rw-r--r--   1 root root       411 Nov  6  2008 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txt
--rw-r--r--   1 root root    837944 Nov  6  2008 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz
--rw-r--r--   1 root root       197 Nov  6  2008 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz.asc
--rw-r--r--   1 root root       239 Mar 20 17:31 ./slackware64/xap/xgames-0.3-x86_64-4.txt
--rw-r--r--   1 root root    114676 Mar 20 17:31 ./slackware64/xap/xgames-0.3-x86_64-4.txz
--rw-r--r--   1 root root       198 Mar 20 17:31 ./slackware64/xap/xgames-0.3-x86_64-4.txz.asc
--rw-r--r--   1 root root       468 Nov  6 21:05 ./slackware64/xap/xine-lib-1.1.19-x86_64-1.txt
--rw-r--r--   1 root root   3642104 Nov  6 21:05 ./slackware64/xap/xine-lib-1.1.19-x86_64-1.txz
--rw-r--r--   1 root root       198 Nov  6 21:05 ./slackware64/xap/xine-lib-1.1.19-x86_64-1.txz.asc
--rw-r--r--   1 root root       374 Feb 19  2010 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txt
--rw-r--r--   1 root root   1281472 Feb 19  2010 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txz
--rw-r--r--   1 root root       197 Feb 19  2010 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txz.asc
--rw-r--r--   1 root root       462 Mar 15 22:26 ./slackware64/xap/xlockmore-5.32-x86_64-1.txt
--rw-r--r--   1 root root   1016612 Mar 15 22:26 ./slackware64/xap/xlockmore-5.32-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 15 22:26 ./slackware64/xap/xlockmore-5.32-x86_64-1.txz.asc
--rw-r--r--   1 root root       379 Mar 25  2010 ./slackware64/xap/xmms-1.2.11-x86_64-4.txt
--rw-r--r--   1 root root   1153728 Mar 25  2010 ./slackware64/xap/xmms-1.2.11-x86_64-4.txz
--rw-r--r--   1 root root       198 Mar 25  2010 ./slackware64/xap/xmms-1.2.11-x86_64-4.txz.asc
--rw-r--r--   1 root root       445 Feb 20  2010 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txt
--rw-r--r--   1 root root    423688 Feb 20  2010 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txz
--rw-r--r--   1 root root       197 Feb 20  2010 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txz.asc
--rw-r--r--   1 root root       188 Mar 31 19:24 ./slackware64/xap/xpdf-3.02pl6-x86_64-3.txt
--rw-r--r--   1 root root   1489460 Mar 31 19:24 ./slackware64/xap/xpdf-3.02pl6-x86_64-3.txz
--rw-r--r--   1 root root       198 Mar 31 19:24 ./slackware64/xap/xpdf-3.02pl6-x86_64-3.txz.asc
--rw-r--r--   1 root root       499 Feb 28 03:41 ./slackware64/xap/xsane-0.998-x86_64-1.txt
--rw-r--r--   1 root root   1633000 Feb 28 03:41 ./slackware64/xap/xsane-0.998-x86_64-1.txz
--rw-r--r--   1 root root       198 Feb 28 03:41 ./slackware64/xap/xsane-0.998-x86_64-1.txz.asc
--rw-r--r--   1 root root       424 Mar 15 22:38 ./slackware64/xap/xscreensaver-5.12-x86_64-1.txt
--rw-r--r--   1 root root   3481372 Mar 15 22:38 ./slackware64/xap/xscreensaver-5.12-x86_64-1.txz
--rw-r--r--   1 root root       198 Mar 15 22:38 ./slackware64/xap/xscreensaver-5.12-x86_64-1.txz.asc
--rw-r--r--   1 root root       235 Feb 19  2010 ./slackware64/xap/xv-3.10a-x86_64-6.txt
--rw-r--r--   1 root root    939688 Feb 19  2010 ./slackware64/xap/xv-3.10a-x86_64-6.txz
--rw-r--r--   1 root root       197 Feb 19  2010 ./slackware64/xap/xv-3.10a-x86_64-6.txz.asc
--rw-r--r--   1 root root       418 Apr  5 00:45 ./slackware64/xap/xxgdb-1.12-x86_64-3.txt
--rw-r--r--   1 root root     51460 Apr  5 00:45 ./slackware64/xap/xxgdb-1.12-x86_64-3.txz
--rw-r--r--   1 root root       198 Apr  5 00:45 ./slackware64/xap/xxgdb-1.12-x86_64-3.txz.asc
-drwxr-xr-x   2 root root      4096 May 16  2010 ./slackware64/y
--rw-r--r--   1 root root       596 May 15  2010 ./slackware64/y/bsd-games-2.13-x86_64-11.txt
--rw-r--r--   1 root root   1759252 May 15  2010 ./slackware64/y/bsd-games-2.13-x86_64-11.txz
--rw-r--r--   1 root root       198 May 15  2010 ./slackware64/y/bsd-games-2.13-x86_64-11.txz.asc
--rwxr-xr-x   1 root root      2897 Jun 24  2009 ./slackware64/y/install-packages
--rw-r--r--   1 root root       446 Sep 18  2006 ./slackware64/y/install.end
--rw-r--r--   1 root root      1136 Mar  1  2010 ./slackware64/y/maketag
--rw-r--r--   1 root root      1136 Mar  1  2010 ./slackware64/y/maketag.ez
--rw-r--r--   1 root root        14 Mar  1  2010 ./slackware64/y/tagfile
-drwxr-xr-x  19 root root      4096 Apr 25 17:03 ./source
--rw-r--r--   1 root root    328446 Apr 25 17:03 ./source/CHECKSUMS.md5
--rw-r--r--   1 root root       198 Apr 25 17:03 ./source/CHECKSUMS.md5.asc
--rw-r--r--   1 root root    440693 Apr 25 17:01 ./source/FILE_LIST
--rw-r--r--   1 root root   7155058 Apr 25 17:01 ./source/MANIFEST.bz2
-drwxr-xr-x  96 root root      4096 Apr 17 20:06 ./source/a
-drwxr-xr-x   2 root root      4096 Mar 25 18:37 ./source/a/aaa_base
--rw-r--r--   1 root root     11053 Mar 25 18:37 ./source/a/aaa_base/_aaa_base.tar.gz
--rwxr-xr-x   1 root root      2174 Mar 25 18:37 ./source/a/aaa_base/aaa_base.SlackBuild
--rw-r--r--   1 root root       786 Mar 28  2002 ./source/a/aaa_base/slack-desc
--rw-r--r--   1 root root        18 Mar 25 18:37 ./source/a/aaa_base/slackware-version
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/a/aaa_elflibs
--rwxr-xr-x   1 root root      2617 Apr 22 17:13 ./source/a/aaa_elflibs/aaa_elflibs.SlackBuild
--rw-r--r--   1 root root      1030 Jun 14  2004 ./source/a/aaa_elflibs/slack-desc
--rw-r--r--   1 root root      1524 Mar  6 20:00 ./source/a/aaa_elflibs/symlinks-to-tracked-libs
--rw-r--r--   1 root root       194 Nov  3 17:47 ./source/a/aaa_elflibs/tracked-files
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/aaa_terminfo
--rwxr-xr-x   1 root root      2464 Mar  7 18:01 ./source/a/aaa_terminfo/aaa_terminfo.SlackBuild
--rw-r--r--   1 root root       968 Jan  2  2007 ./source/a/aaa_terminfo/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 18 18:46 ./source/a/acl
--rw-r--r--   1 root root    365413 Apr 16 00:05 ./source/a/acl/acl-2.2.50.src.tar.gz
--rwxr-xr-x   1 root root      3777 Apr 18 18:46 ./source/a/acl/acl.SlackBuild
--rw-r--r--   1 root root       509 Apr 18 18:42 ./source/a/acl/acl.destdir.diff.gz
--rw-r--r--   1 root root       870 Apr 18 18:43 ./source/a/acl/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 16 04:07 ./source/a/acpid
--rw-r--r--   1 root root       224 Feb  5  2004 ./source/a/acpid/acpi_handler.sh.gz
--rw-r--r--   1 root root     75552 Apr 15 17:36 ./source/a/acpid/acpid-2.0.9.tar.gz
--rwxr-xr-x   1 root root      2952 Apr 16 04:08 ./source/a/acpid/acpid.SlackBuild
--rw-r--r--   1 root root       399 May 16  2002 ./source/a/acpid/default.gz
--rw-r--r--   1 root root       271 Jan 16  2010 ./source/a/acpid/doinst.sh.gz
--rw-r--r--   1 root root       285 Feb 16  2010 ./source/a/acpid/rc.acpid.gz
--rw-r--r--   1 root root       927 Apr 16 04:07 ./source/a/acpid/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/apmd
--rw-r--r--   1 root root     61686 Apr 30  2004 ./source/a/apmd/apmd-3.2.2.tar.bz2
--rwxr-xr-x   1 root root      3572 Apr 11 06:19 ./source/a/apmd/apmd.SlackBuild
--rw-r--r--   1 root root      1009 Feb 22  2002 ./source/a/apmd/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 18 18:38 ./source/a/attr
--rw-r--r--   1 root root    318247 Apr 16 00:05 ./source/a/attr/attr-2.4.45.src.tar.gz
--rw-r--r--   1 root root        72 Apr 16 00:05 ./source/a/attr/attr-2.4.45.src.tar.gz.sig
--rwxr-xr-x   1 root root      3836 Apr 18 18:39 ./source/a/attr/attr.SlackBuild
--rw-r--r--   1 root root       514 Apr 18 18:28 ./source/a/attr/attr.destdir.diff.gz
--rw-r--r--   1 root root        88 Feb 28  2006 ./source/a/attr/build
--rw-r--r--   1 root root      1063 Apr 18 18:00 ./source/a/attr/slack-desc
-drwxr-xr-x   3 root root      4096 Feb  8  2010 ./source/a/bash
-drwxr-xr-x   2 root root      4096 Mar 10 05:06 ./source/a/bash/bash-4.1-patches
--rw-r--r--   1 root root      1445 Jan 18  2010 ./source/a/bash/bash-4.1-patches/bash41-001
--rw-r--r--   1 root root        65 Jan 18  2010 ./source/a/bash/bash-4.1-patches/bash41-001.sig
--rw-r--r--   1 root root      1799 Jan 18  2010 ./source/a/bash/bash-4.1-patches/bash41-002
--rw-r--r--   1 root root        65 Jan 18  2010 ./source/a/bash/bash-4.1-patches/bash41-002.sig
--rw-r--r--   1 root root      1407 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-003
--rw-r--r--   1 root root        65 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-003.sig
--rw-r--r--   1 root root      1705 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-004
--rw-r--r--   1 root root        65 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-004.sig
--rw-r--r--   1 root root      1626 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-005
--rw-r--r--   1 root root        65 Mar 26  2010 ./source/a/bash/bash-4.1-patches/bash41-005.sig
--rw-r--r--   1 root root      2166 May 14  2010 ./source/a/bash/bash-4.1-patches/bash41-006
--rw-r--r--   1 root root        65 May 14  2010 ./source/a/bash/bash-4.1-patches/bash41-006.sig
--rw-r--r--   1 root root      1610 May 14  2010 ./source/a/bash/bash-4.1-patches/bash41-007
--rw-r--r--   1 root root        65 May 14  2010 ./source/a/bash/bash-4.1-patches/bash41-007.sig
--rw-r--r--   1 root root      1610 Oct  8  2010 ./source/a/bash/bash-4.1-patches/bash41-008
--rw-r--r--   1 root root        72 Oct  8  2010 ./source/a/bash/bash-4.1-patches/bash41-008.sig
--rw-r--r--   1 root root      1323 Oct  8  2010 ./source/a/bash/bash-4.1-patches/bash41-009
--rw-r--r--   1 root root        72 Oct  8  2010 ./source/a/bash/bash-4.1-patches/bash41-009.sig
--rw-r--r--   1 root root      1801 Feb 25 15:27 ./source/a/bash/bash-4.1-patches/bash41-010
--rw-r--r--   1 root root        65 Feb 25 15:27 ./source/a/bash/bash-4.1-patches/bash41-010.sig
--rw-r--r--   1 root root   4012140 Jan  1  2010 ./source/a/bash/bash-4.1.tar.xz
--rwxr-xr-x   1 root root      4530 Feb  8  2010 ./source/a/bash/bash.SlackBuild
--rw-r--r--   1 root root       189 Feb 23  2009 ./source/a/bash/doinst.sh.gz
--rw-r--r--   1 root root       965 Mar 23  2002 ./source/a/bash/slack-desc
-drwxr-xr-x   3 root root      4096 May 19  2009 ./source/a/bin
--rw-r--r--   1 root root      7275 Dec 30  1994 ./source/a/bin/banners.tar.gz
--rwxr-xr-x   1 root root      4497 Jul 28  2010 ./source/a/bin/bin.SlackBuild
--rw-r--r--   1 root root       478 Feb 24  2004 ./source/a/bin/debianutils_2.7.dsc
--rw-r--r--   1 root root    165590 Feb 24  2004 ./source/a/bin/debianutils_2.7.tar.gz
--rw-r--r--   1 root root     27721 Oct  7  1999 ./source/a/bin/fbset-2.1.tar.gz
-drwxr-xr-x   2 root root      4096 Dec 23  2006 ./source/a/bin/scripts
--rw-r--r--   1 root root       195 Feb 21  2002 ./source/a/bin/scripts/diskcopy.gz
--rw-r--r--   1 root root       595 May  2  1993 ./source/a/bin/scripts/xx.gz
--rw-r--r--   1 root root       681 Dec 21  2006 ./source/a/bin/slack-desc
--rw-r--r--   1 root root      2403 Jun 15  1997 ./source/a/bin/todos.tar.gz
-drwxr-xr-x   2 root root      4096 Mar 27 22:24 ./source/a/btrfs-progs
--rw-r--r--   1 root root    137044 Mar 27 22:24 ./source/a/btrfs-progs/btrfs-progs-20110327.tar.xz
--rwxr-xr-x   1 root root      4087 Mar 23 00:29 ./source/a/btrfs-progs/btrfs-progs.SlackBuild
--rw-r--r--   1 root root      1978 Mar 27 22:24 ./source/a/btrfs-progs/fsck.btrfs
--rw-r--r--   1 root root      1102 Jan 20  2010 ./source/a/btrfs-progs/slack-desc
-drwxr-xr-x   2 root root      4096 Sep 20  2010 ./source/a/bzip2
--rw-r--r--   1 root root    782025 Sep 20  2010 ./source/a/bzip2/bzip2-1.0.6.tar.gz
--rwxr-xr-x   1 root root      4034 Sep 20  2010 ./source/a/bzip2/bzip2.SlackBuild
--rw-r--r--   1 root root       288 Sep 20  2010 ./source/a/bzip2/bzip2.saneso.diff.gz
--rw-r--r--   1 root root       934 Feb 19  2002 ./source/a/bzip2/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 14 20:28 ./source/a/coreutils
--rw-r--r--   1 root root      1854 Apr 14 20:27 ./source/a/coreutils/DIR_COLORS.gz
--rw-r--r--   1 root root   4841952 Apr 13 20:20 ./source/a/coreutils/coreutils-8.11.tar.xz
--rw-r--r--   1 root root       836 Apr 13 20:20 ./source/a/coreutils/coreutils-8.11.tar.xz.sig
--rw-r--r--   1 root root       778 Apr 28  2010 ./source/a/coreutils/coreutils-dircolors.csh.gz
--rw-r--r--   1 root root       931 May 11  2010 ./source/a/coreutils/coreutils-dircolors.sh.gz
--rwxr-xr-x   1 root root      7036 Nov  4 22:20 ./source/a/coreutils/coreutils.SlackBuild
--rw-r--r--   1 root root      1610 Sep 15  2009 ./source/a/coreutils/coreutils.uname.diff.gz
--rw-r--r--   1 root root       270 Feb 23  2009 ./source/a/coreutils/doinst.sh.gz
--rw-r--r--   1 root root       985 May 20  2003 ./source/a/coreutils/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 11 04:30 ./source/a/cpio
--rw-r--r--   1 root root    809000 Mar 10  2010 ./source/a/cpio/cpio-2.11.tar.xz
--rwxr-xr-x   1 root root      4294 Mar 11 04:31 ./source/a/cpio/cpio.SlackBuild
--rw-r--r--   1 root root       942 Mar 23  2002 ./source/a/cpio/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 25 20:06 ./source/a/cpufrequtils
--rw-r--r--   1 root root     52186 Jul  5  2010 ./source/a/cpufrequtils/cpufrequtils-008.tar.bz2
--rw-r--r--   1 root root       248 Jul  5  2010 ./source/a/cpufrequtils/cpufrequtils-008.tar.bz2.sign
--rwxr-xr-x   1 root root      3298 Mar 11  2010 ./source/a/cpufrequtils/cpufrequtils.SlackBuild
--rw-r--r--   1 root root      1083 Mar 11  2010 ./source/a/cpufrequtils/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  6 00:29 ./source/a/cryptsetup
--rw-r--r--   1 root root    523859 Dec 20 11:46 ./source/a/cryptsetup/cryptsetup-1.2.0.tar.bz2
--rw-r--r--   1 root root       198 Dec 20 11:46 ./source/a/cryptsetup/cryptsetup-1.2.0.tar.bz2.asc
--rwxr-xr-x   1 root root      4183 Jan  6 00:27 ./source/a/cryptsetup/cryptsetup.SlackBuild
--rw-r--r--   1 root root      1045 Nov  8 02:48 ./source/a/cryptsetup/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 10 01:06 ./source/a/cups
--rw-r--r--   1 root root   4517061 Jan  6 22:31 ./source/a/cups/cups-1.4.6-source.tar.bz2
--rw-r--r--   1 root root    199167 Jan  3  2004 ./source/a/cups/cups-samba-5.0rc3.tar.gz
--rw-r--r--   1 root root     38284 Apr 19  2006 ./source/a/cups/cups-windows-6.0-source.tar.bz2
--rwxr-xr-x   1 root root      6729 Jan 10 01:47 ./source/a/cups/cups.SlackBuild
--rw-r--r--   1 root root      2502 Dec 11 21:24 ./source/a/cups/cups.fix_broken_locking.diff.gz
--rw-r--r--   1 root root       565 May 17  2010 ./source/a/cups/doinst.sh.gz
--rw-r--r--   1 root root      1099 Feb  1  2002 ./source/a/cups/slack-desc
--rw-r--r--   1 root root      5324 Apr 26  2010 ./source/a/cups/usb-backend-both-usblp-and-libusb.dpatch.gz
-drwxr-xr-x   2 root root      4096 Aug 10  2010 ./source/a/cxxlibs
--rwxr-xr-x   1 root root      2099 Jan  7 06:46 ./source/a/cxxlibs/cxxlibs.SlackBuild
--rw-r--r--   1 root root       738 Mar 23  2002 ./source/a/cxxlibs/slack-desc
--rw-r--r--   1 root root       224 Apr  3  2008 ./source/a/cxxlibs/symlinks-to-tracked-libs
--rw-r--r--   1 root root        52 Jul 24  2009 ./source/a/cxxlibs/symlinks-to-tracked-libs64
-drwxr-xr-x   2 root root      4096 Dec 21 17:00 ./source/a/dbus
--rw-r--r--   1 root root   1220516 Dec 20 21:42 ./source/a/dbus/dbus-1.4.1.tar.xz
--rw-r--r--   1 root root       486 Sep 14  2010 ./source/a/dbus/dbus-1.4.x-allow_root_globally.diff.gz
--rwxr-xr-x   1 root root      3912 Nov  3 19:31 ./source/a/dbus/dbus.SlackBuild
--rw-r--r--   1 root root       333 Sep 14  2010 ./source/a/dbus/doinst.sh.gz
--rw-r--r--   1 root root       773 May  1  2010 ./source/a/dbus/rc.messagebus.gz
--rw-r--r--   1 root root       945 Oct 21  2007 ./source/a/dbus/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 11  2010 ./source/a/dcron
--rw-r--r--   1 root root       315 Feb 11  2010 ./source/a/dcron/crontab.c.O_EXCL.diff.gz
--rw-r--r--   1 root root       519 May 30  2009 ./source/a/dcron/crontab.root.gz
--rw-r--r--   1 root root     36404 Jan 18  2010 ./source/a/dcron/dcron-4.4.tar.gz
--rwxr-xr-x   1 root root      4105 Feb 11  2010 ./source/a/dcron/dcron.SlackBuild
--rw-r--r--   1 root root      1054 Feb 11  2010 ./source/a/dcron/dcron.manpage.paths.diff.gz
--rw-r--r--   1 root root       193 Feb 11  2010 ./source/a/dcron/defs.h.TMPDIR.diff.gz
--rw-r--r--   1 root root       104 Feb 11  2010 ./source/a/dcron/doinst.sh.gz
--rw-r--r--   1 root root       699 May 30  2009 ./source/a/dcron/run-parts.8.gz
--rw-r--r--   1 root root       567 May 30  2009 ./source/a/dcron/run-parts.gz
--rw-r--r--   1 root root       815 May 30  2009 ./source/a/dcron/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/devs
--rw-r--r--   1 root root     92572 Sep 20  2006 ./source/a/devs/_devs.tar.gz
--rwxr-xr-x   1 root root      2044 May 19  2009 ./source/a/devs/devs.SlackBuild
--rw-r--r--   1 root root       423 Jun  9  2002 ./source/a/devs/makedev.hd.diff.gz
--rw-r--r--   1 root root     27096 Nov 11  2000 ./source/a/devs/makedev_2.3.1-46.2.diff.gz
--rw-r--r--   1 root root       602 Sep  2  2003 ./source/a/devs/makedev_2.3.1.hd.diff.gz
--rw-r--r--   1 root root     10037 Sep  7  1998 ./source/a/devs/makedev_2.3.1.orig.tar.gz
--rw-r--r--   1 root root       262 May 21  2004 ./source/a/devs/makedev_2.3.1.slack.diff.gz
--rw-r--r--   1 root root       766 Mar 20  2002 ./source/a/devs/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/dialog
--rw-r--r--   1 root root    291512 Apr 29  2010 ./source/a/dialog/dialog-1.1-20100428.tar.xz
--rwxr-xr-x   1 root root      4166 Apr  4 05:42 ./source/a/dialog/dialog.SlackBuild
--rw-r--r--   1 root root       334 Apr 23  2009 ./source/a/dialog/dialog.smaller.min.height.diff.gz
--rw-r--r--   1 root root       970 Jan  2  2007 ./source/a/dialog/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 25 19:44 ./source/a/dosfstools
--rw-r--r--   1 root root     70039 Dec 24 17:00 ./source/a/dosfstools/dosfstools-3.0.11.tar.bz2
--rw-r--r--   1 root root       198 Dec 24 17:00 ./source/a/dosfstools/dosfstools-3.0.11.tar.bz2.sign
--rwxr-xr-x   1 root root      4114 Apr  7 23:13 ./source/a/dosfstools/dosfstools.SlackBuild
--rw-r--r--   1 root root       332 Feb 25 19:45 ./source/a/dosfstools/dosfstools.paths.diff.gz
--rw-r--r--   1 root root       742 Dec 21  2006 ./source/a/dosfstools/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 24 23:40 ./source/a/e2fsprogs
--rw-r--r--   1 root root       325 May 30  2009 ./source/a/e2fsprogs/doinst.sh.gz
--rw-r--r--   1 root root   3383012 Dec 23 00:03 ./source/a/e2fsprogs/e2fsprogs-1.41.14.tar.xz
--rwxr-xr-x   1 root root      5019 Aug 24  2010 ./source/a/e2fsprogs/e2fsprogs.SlackBuild
--rw-r--r--   1 root root       803 May 30  2009 ./source/a/e2fsprogs/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/ed
--rw-r--r--   1 root root     65712 Jul 10  2009 ./source/a/ed/ed-1.4.tar.xz
--rwxr-xr-x   1 root root      3812 Jul 28  2010 ./source/a/ed/ed.SlackBuild
--rw-r--r--   1 root root       805 Dec 13  2006 ./source/a/ed/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 25  2010 ./source/a/eject
--rw-r--r--   1 root root    107301 Jun  4  2006 ./source/a/eject/eject-2.1.5.tar.bz2
--rwxr-xr-x   1 root root      3501 Jan 25  2010 ./source/a/eject/eject.SlackBuild
--rw-r--r--   1 root root       883 Jan 25  2010 ./source/a/eject/eject.spaces.diff.gz
--rw-r--r--   1 root root       886 Dec 14  2006 ./source/a/eject/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 27  2010 ./source/a/elvis
--rw-r--r--   1 root root   1143603 Oct 21  2003 ./source/a/elvis/elvis-2.2_0.tar.bz2
--rwxr-xr-x   1 root root      4002 Jan 27  2010 ./source/a/elvis/elvis.SlackBuild
--rw-r--r--   1 root root      1633 Feb 22  2004 ./source/a/elvis/elvis.clr
--rw-r--r--   1 root root      1584 Oct 21  2003 ./source/a/elvis/elvis.clr.orig
--rw-r--r--   1 root root       673 Jan 27  2010 ./source/a/elvis/elvis.ref.c.getline.diff.gz
--rw-r--r--   1 root root       845 Feb 11  2008 ./source/a/elvis/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  5  2010 ./source/a/etc
--rw-r--r--   1 root root     34612 Feb  5  2010 ./source/a/etc/_etc.tar.gz
--rwxr-xr-x   1 root root      2032 Feb  5  2010 ./source/a/etc/etc.SlackBuild
--rw-r--r--   1 root root       536 Oct 11  2002 ./source/a/etc/nsswitch.conf.gz
--rw-r--r--   1 root root       657 Mar 23  2002 ./source/a/etc/slack-desc
--rw-r--r--   1 root root    226973 Mar  2  2000 ./source/a/etc/termcap-BSD.gz
-drwxr-xr-x   2 root root      4096 Jan 18 22:59 ./source/a/file
--rw-r--r--   1 root root    434260 Jan 17 19:47 ./source/a/file/file-5.05.tar.xz
--rwxr-xr-x   1 root root      5048 Feb  6  2010 ./source/a/file/file.SlackBuild
--rw-r--r--   1 root root       195 Feb 23  2009 ./source/a/file/file.crdaregbin.magic.gz
--rw-r--r--   1 root root       212 Jun 12  2009 ./source/a/file/file.etc.file.diff.gz
--rw-r--r--   1 root root       336 Feb  9  2009 ./source/a/file/file.quiet.diff.gz
--rw-r--r--   1 root root       272 Feb  9  2009 ./source/a/file/file.short.diff.gz
--rw-r--r--   1 root root       248 Apr 23  2009 ./source/a/file/file.xz.magic.gz
--rw-r--r--   1 root root       214 Sep  7  2005 ./source/a/file/file.zisofs.magic.gz
--rw-r--r--   1 root root       680 Dec 13  2006 ./source/a/file/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 13  2009 ./source/a/findutils
--rw-r--r--   1 root root   1114432 Jun  6  2009 ./source/a/findutils/findutils-4.4.2.tar.xz
--rwxr-xr-x   1 root root      3850 Jul 28  2010 ./source/a/findutils/findutils.SlackBuild
--rw-r--r--   1 root root       186 Feb 21  2009 ./source/a/findutils/findutils.no.default.options.warnings.diff.gz
--rw-r--r--   1 root root       359 Feb 21  2009 ./source/a/findutils/findutils.nolocate.diff.gz
--rw-r--r--   1 root root       828 Apr  7  2002 ./source/a/findutils/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/a/floppy
--rw-r--r--   1 root root     25310 May  1  2002 ./source/a/floppy/fdutils-5.4-20020222.diff.gz
--rw-r--r--   1 root root    190535 Feb  4  2001 ./source/a/floppy/fdutils-5.4.tar.gz
--rw-r--r--   1 root root       182 Feb  4  2001 ./source/a/floppy/fdutils.mediaprm.diff.gz
--rwxr-xr-x   1 root root      3661 Jul 28  2010 ./source/a/floppy/floppy.SlackBuild
--rw-r--r--   1 root root     11298 May  1  2002 ./source/a/floppy/mediaprm
--rw-r--r--   1 root root    286730 May 27  2001 ./source/a/floppy/mtools-3.9.8.tar.gz
--rw-r--r--   1 root root      1914 Feb  4  2001 ./source/a/floppy/mtools.conf
--rw-r--r--   1 root root       728 Mar 23  2002 ./source/a/floppy/slack-desc
-drwxr-xr-x   2 root root      4096 May  9  2010 ./source/a/gawk
--rw-r--r--   1 root root   1523944 May  7  2010 ./source/a/gawk/gawk-3.1.8.tar.xz
--rwxr-xr-x   1 root root      3742 May  9  2010 ./source/a/gawk/gawk.SlackBuild
--rw-r--r--   1 root root      1043 Mar 23  2002 ./source/a/gawk/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  2 21:35 ./source/a/gdisk
--rw-r--r--   1 root root     97576 Jan  8 23:35 ./source/a/gdisk/gdisk-0.6.14.tar.xz
--rwxr-xr-x   1 root root      3465 Mar  2 21:35 ./source/a/gdisk/gdisk.SlackBuild
--rw-r--r--   1 root root       894 Mar  2 21:28 ./source/a/gdisk/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/genpower
--rw-r--r--   1 root root     66728 Jan  4  2005 ./source/a/genpower/genpower-1.0.5.tar.gz
--rwxr-xr-x   1 root root      3352 Jul 28  2010 ./source/a/genpower/genpower.SlackBuild
--rw-r--r--   1 root root       514 Dec  3  2008 ./source/a/genpower/genpower.halt.diff.gz
--rw-r--r--   1 root root       460 Apr 11  2002 ./source/a/genpower/genpower.var.diff.gz
--rw-r--r--   1 root root       957 Apr 11  2002 ./source/a/genpower/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 14  2010 ./source/a/gettext
--rw-r--r--   1 root root  11941176 Jun  6  2010 ./source/a/gettext/gettext-0.18.1.1.tar.bz2
--rwxr-xr-x   1 root root      3601 Jul 14  2010 ./source/a/gettext/gettext-tools.SlackBuild
--rwxr-xr-x   1 root root      3336 Jul 14  2010 ./source/a/gettext/gettext.SlackBuild
--rw-r--r--   1 root root       737 Feb 11  2008 ./source/a/gettext/slack-desc
--rw-r--r--   1 root root      1093 Feb 11  2008 ./source/a/gettext/slack-desc.gettext-tools
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/getty-ps
--rwxr-xr-x   1 root root      2942 Jul 28  2010 ./source/a/getty-ps/getty-ps.SlackBuild
--rw-r--r--   1 root root      3609 Jul 21  2005 ./source/a/getty-ps/getty.bugfixes.diff.gz
--rw-r--r--   1 root root      1223 Oct  4  2002 ./source/a/getty-ps/getty_ps-2.1.0.lsm
--rw-r--r--   1 root root    117414 Jul 21  2005 ./source/a/getty-ps/getty_ps-2.1.0b.tar.gz
--rw-r--r--   1 root root       969 Feb 11  2008 ./source/a/getty-ps/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/gpm
--rw-r--r--   1 root root       344 Oct 13  2004 ./source/a/gpm/gpm-1.20.1-consolename.patch.gz
--rw-r--r--   1 root root       404 Sep  9  2004 ./source/a/gpm/gpm-1.20.1-gpmopen.patch.gz
--rw-r--r--   1 root root       274 Sep  9  2004 ./source/a/gpm/gpm-1.20.1-idie.patch.gz
--rw-r--r--   1 root root       289 Dec 12  2006 ./source/a/gpm/gpm-1.20.1-input-defines.diff.gz
--rw-r--r--   1 root root       301 Sep 23  2004 ./source/a/gpm/gpm-1.20.1-input.patch.gz
--rw-r--r--   1 root root       362 Jan 18  2006 ./source/a/gpm/gpm-1.20.1-lib-silent.patch.gz
--rw-r--r--   1 root root       294 Sep  9  2004 ./source/a/gpm/gpm-1.20.1-math.patch.gz
--rw-r--r--   1 root root       791 Oct 20  2004 ./source/a/gpm/gpm-1.20.1-multilib.patch.gz
--rw-r--r--   1 root root       356 Jan 18  2006 ./source/a/gpm/gpm-1.20.1-no-console-error.patch.gz
--rw-r--r--   1 root root       249 Oct 13  2004 ./source/a/gpm/gpm-1.20.1-nodebug.patch.gz
--rw-r--r--   1 root root       237 Sep  9  2004 ./source/a/gpm/gpm-1.20.1-subscript.patch.gz
--rw-r--r--   1 root root       515 Sep  9  2004 ./source/a/gpm/gpm-1.20.1-weak-wgetch.patch.gz
--rw-r--r--   1 root root       651 Aug 20  2006 ./source/a/gpm/gpm-1.20.1.send-noise-to-syslogs.diff.gz
--rw-r--r--   1 root root    565014 Jun 25  2004 ./source/a/gpm/gpm-1.20.1.tar.bz2
--rw-r--r--   1 root root     59408 Sep  9  2004 ./source/a/gpm/gpm-evdev-cumulative.patch.gz
--rwxr-xr-x   1 root root      5750 Jul 28  2010 ./source/a/gpm/gpm.SlackBuild
--rw-r--r--   1 root root       285 Feb  7  2006 ./source/a/gpm/gpm.evdevmakefile.patch.gz
--rw-r--r--   1 root root      4268 Sep  9  2004 ./source/a/gpm/inputattach.c.gz
--rw-r--r--   1 root root       168 Apr 15  2001 ./source/a/gpm/mouseconfig.gz
--rw-r--r--   1 root root      2117 Mar 15  2008 ./source/a/gpm/setup.mouse.gz
--rw-r--r--   1 root root       965 May 29  2002 ./source/a/gpm/slack-desc
-drwxr-xr-x   2 root root      4096 Oct 28 17:28 ./source/a/grep
--rw-r--r--   1 root root    924276 Sep 20  2010 ./source/a/grep/grep-2.7.tar.xz
--rw-r--r--   1 root root       836 Sep 20  2010 ./source/a/grep/grep-2.7.tar.xz.sig
--rwxr-xr-x   1 root root      3703 Oct 28 17:28 ./source/a/grep/grep.SlackBuild
--rw-r--r--   1 root root       747 Apr  2  2002 ./source/a/grep/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9  2010 ./source/a/gzip
--rw-r--r--   1 root root    618124 Jan 20  2010 ./source/a/gzip/gzip-1.4.tar.xz
--rw-r--r--   1 root root       836 Jan 20  2010 ./source/a/gzip/gzip-1.4.tar.xz.sig
--rwxr-xr-x   1 root root      4934 Feb  9  2010 ./source/a/gzip/gzip.SlackBuild
--rw-r--r--   1 root root       770 Mar 23  2002 ./source/a/gzip/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 26 23:02 ./source/a/hdparm
--rw-r--r--   1 root root    122062 Jan 24 15:17 ./source/a/hdparm/hdparm-9.37.tar.gz
--rwxr-xr-x   1 root root      2886 Jul 28  2010 ./source/a/hdparm/hdparm.SlackBuild
--rw-r--r--   1 root root       805 Feb 22  2002 ./source/a/hdparm/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 24  2009 ./source/a/infozip
--rwxr-xr-x   1 root root      3434 Jul 28  2010 ./source/a/infozip/infozip.SlackBuild
--rw-r--r--   1 root root       924 Mar 29  2002 ./source/a/infozip/slack-desc
--rw-r--r--   1 root root    882180 Jan  2  2009 ./source/a/infozip/unzip60.tar.xz
--rw-r--r--   1 root root    775420 Jul  5  2008 ./source/a/infozip/zip30.tar.xz
-drwxr-xr-x   2 root root      4096 May  8  2010 ./source/a/inotify-tools
--rw-r--r--   1 root root    243384 Mar 14  2010 ./source/a/inotify-tools/inotify-tools-3.14.tar.xz
--rwxr-xr-x   1 root root      3972 May  8  2010 ./source/a/inotify-tools/inotify-tools.SlackBuild
--rw-r--r--   1 root root       977 Feb 11  2008 ./source/a/inotify-tools/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 29 19:00 ./source/a/jfsutils
--rw-r--r--   1 root root    374892 Mar  4 19:26 ./source/a/jfsutils/jfsutils-1.1.15.tar.xz
--rwxr-xr-x   1 root root      3694 Mar 29 19:01 ./source/a/jfsutils/jfsutils.SlackBuild
--rw-r--r--   1 root root       998 Feb 16  2003 ./source/a/jfsutils/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 29  2010 ./source/a/kbd
--rwxr-xr-x   1 root root      7076 Apr 29  2010 ./source/a/kbd/kbd.SlackBuild
--rw-r--r--   1 root root     11717 Apr 29  2010 ./source/a/kbd/setconsolefont
--rw-r--r--   1 root root       283 May 14  2009 ./source/a/kbd/setup.setconsolefont
--rw-r--r--   1 root root       919 Feb 27  2003 ./source/a/kbd/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 29  2010 ./source/a/kbd/sources
--rw-r--r--   1 root root     24797 May 26  2001 ./source/a/kbd/sources/extraf.tgz
--rw-r--r--   1 root root       960 Jan  8  2009 ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch.gz
--rw-r--r--   1 root root       270 Jan  8  2009 ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch.gz
--rw-r--r--   1 root root       399 Aug 25  2009 ./source/a/kbd/sources/kbd-1.15-unicode_start.patch.gz
--rw-r--r--   1 root root       213 Apr 29  2010 ./source/a/kbd/sources/kbd-1.15.2-po.patch.gz
--rw-r--r--   1 root root   1040140 Apr 10  2010 ./source/a/kbd/sources/kbd-1.15.2.tar.bz2
--rw-r--r--   1 root root       248 Apr 10  2010 ./source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign
--rw-r--r--   1 root root      4291 Oct 15  2007 ./source/a/kbd/sources/kbd-latarcyrheb-16-fixed.tar.bz2
--rw-r--r--   1 root root      6155 Sep 29  2006 ./source/a/kbd/sources/kbd-latsun-fonts.tar.bz2
--rw-r--r--   1 root root       224 May 30  2004 ./source/a/kbd/sources/nl.euro.diff.gz
--rw-r--r--   1 root root      2338 Nov 14  2007 ./source/a/kbd/sources/ro_maps.tar.bz2
--rw-r--r--   1 root root      3543 May 24  2002 ./source/a/kbd/sources/speakup-jfw.tar.gz
--rw-r--r--   1 root root      2246 Oct  5  2001 ./source/a/kbd/sources/speakupmap.map.gz
-drwxr-xr-x   2 root root      4096 Apr 11 23:07 ./source/a/less
--rw-r--r--   1 root root    234588 Apr 10 06:05 ./source/a/less/less-443.tar.xz
--rwxr-xr-x   1 root root      3397 Feb  9  2010 ./source/a/less/less.SlackBuild
--rw-r--r--   1 root root       313 May 28  2002 ./source/a/less/less.sysconfdir.diff.gz
--rw-r--r--   1 root root      1355 Nov  5  2009 ./source/a/less/lesspipe.sh.gz
--rw-r--r--   1 root root       841 Mar 23  2002 ./source/a/less/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/lha
--rw-r--r--   1 root root     64608 Dec 15  2000 ./source/a/lha/lha-114i.tar.gz
--rwxr-xr-x   1 root root      2808 Jul 28  2010 ./source/a/lha/lha.SlackBuild
--rw-r--r--   1 root root     45132 Dec 13  2006 ./source/a/lha/lha_1.14i-10.1.diff.gz
--rw-r--r--   1 root root       606 Dec 23  2006 ./source/a/lha/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 20:23 ./source/a/libcgroup
--rw-r--r--   1 root root       513 Jan 10 20:23 ./source/a/libcgroup/doinst.sh.gz
--rw-r--r--   1 root root    369988 Mar  3 08:33 ./source/a/libcgroup/libcgroup-0.37.1.tar.xz
--rwxr-xr-x   1 root root      4867 Mar  3 18:41 ./source/a/libcgroup/libcgroup.SlackBuild
--rw-r--r--   1 root root       282 Jan 10 20:16 ./source/a/libcgroup/libcgroup.conf.diff.gz
--rw-r--r--   1 root root      1260 Mar  3 20:23 ./source/a/libcgroup/libcgroup.init.diff.gz
--rw-r--r--   1 root root      1057 Jan 10 19:23 ./source/a/libcgroup/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 27 06:14 ./source/a/lilo
--rw-r--r--   1 root root    437555 Feb 19  2007 ./source/a/lilo/lilo-22.8.src.tar.gz
--rw-r--r--   1 root root       536 Feb 19  2007 ./source/a/lilo/lilo-22.8.src.tar.gz.sig
--rwxr-xr-x   1 root root      3232 Mar 27 05:57 ./source/a/lilo/lilo.SlackBuild
--rw-r--r--   1 root root       709 Dec 18  2009 ./source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff.gz
--rw-r--r--   1 root root     39716 Mar 27 06:53 ./source/a/lilo/liloconfig
--rw-r--r--   1 root root       105 Mar  9  2002 ./source/a/lilo/setup.liloconfig
--rw-r--r--   1 root root     14406 Mar 27 05:51 ./source/a/lilo/sl1337.bmp
--rw-r--r--   1 root root      1045 Mar 23  2002 ./source/a/lilo/slack-desc
--rw-r--r--   1 root root     14174 Feb 15  2010 ./source/a/lilo/slack.bmp
--rw-r--r--   1 root root       133 Feb 22  2008 ./source/a/lilo/slack.dat
--rw-r--r--   1 root root     15634 Mar 27 05:32 ./source/a/lilo/slack64.bmp
--rw-r--r--   1 root root      3331 Jul  8  1994 ./source/a/lilo/text.lilohelp
-drwxr-xr-x   2 root root      4096 Feb 12  2010 ./source/a/logrotate
--rw-r--r--   1 root root       268 May 30  2009 ./source/a/logrotate/doinst.sh.gz
--rw-r--r--   1 root root     37716 May 30  2009 ./source/a/logrotate/logrotate-3.7.8.tar.xz
--rwxr-xr-x   1 root root      3243 Feb 12  2010 ./source/a/logrotate/logrotate.SlackBuild
--rw-r--r--   1 root root       645 May 30  2009 ./source/a/logrotate/logrotate.conf.gz
--rw-r--r--   1 root root       131 May 30  2009 ./source/a/logrotate/logrotate.cron.gz
--rw-r--r--   1 root root      1076 May 30  2009 ./source/a/logrotate/logrotate.slackware.diff.gz
--rw-r--r--   1 root root       993 May 30  2009 ./source/a/logrotate/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 17 20:11 ./source/a/lrzip
--rw-r--r--   1 root root       266 Apr 17 20:11 ./source/a/lrzip/doinst.sh.gz
--rw-r--r--   1 root root    345788 Apr 13 05:35 ./source/a/lrzip/lrzip-0.602.tar.xz
--rwxr-xr-x   1 root root      3967 Apr 17 20:12 ./source/a/lrzip/lrzip.SlackBuild
--rw-r--r--   1 root root       904 Apr 17 20:04 ./source/a/lrzip/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 10 02:24 ./source/a/lvm2
--rw-r--r--   1 root root    725804 Feb  9 12:09 ./source/a/lvm2/LVM2.2.02.84.tar.xz
--rw-r--r--   1 root root       478 Feb 10 02:23 ./source/a/lvm2/build_with_udev_165_and_later.diff.gz
--rw-r--r--   1 root root       271 Oct  6  2008 ./source/a/lvm2/doinst.sh.gz
--rwxr-xr-x   1 root root      4456 Feb  9 05:55 ./source/a/lvm2/lvm2.SlackBuild
--rw-r--r--   1 root root      1012 Feb  8  2008 ./source/a/lvm2/slack-desc
-drwxr-xr-x   2 root root      4096 Sep 27  2010 ./source/a/mcelog
--rw-r--r--   1 root root       355 Sep 27  2010 ./source/a/mcelog/doinst.sh.gz
--rw-r--r--   1 root root    167285 Jan 21  2010 ./source/a/mcelog/mcelog-1.0pre3.tar.bz2
--rw-r--r--   1 root root       248 Jan 21  2010 ./source/a/mcelog/mcelog-1.0pre3.tar.bz2.sign
--rwxr-xr-x   1 root root      2964 Sep 27  2010 ./source/a/mcelog/mcelog.SlackBuild
--rw-r--r--   1 root root       712 Sep 27  2010 ./source/a/mcelog/mcelog.init.diff.gz
--rw-r--r--   1 root root      1044 Sep 27  2010 ./source/a/mcelog/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  7 03:19 ./source/a/mdadm
--rw-r--r--   1 root root       261 May 27  2004 ./source/a/mdadm/doinst.sh.gz
--rw-r--r--   1 root root    292709 Mar 23 04:51 ./source/a/mdadm/mdadm-3.1.5.tar.bz2
--rw-r--r--   1 root root       249 Mar 23 04:51 ./source/a/mdadm/mdadm-3.1.5.tar.bz2.sign
--rwxr-xr-x   1 root root      2931 Apr  7 03:19 ./source/a/mdadm/mdadm.SlackBuild
--rw-r--r--   1 root root       258 May 17  2010 ./source/a/mdadm/mdadm.static.diff.gz
--rw-r--r--   1 root root       928 May 27  2004 ./source/a/mdadm/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  1 23:54 ./source/a/minicom
--rw-r--r--   1 root root       503 Sep 30  2008 ./source/a/minicom/config.sub-x86_64.diff.gz
--rw-r--r--   1 root root       290 Feb  1 21:44 ./source/a/minicom/doinst.sh.gz
--rw-r--r--   1 root root     30271 Nov 23  2009 ./source/a/minicom/lrzsz_0.12.21-5.diff.gz
--rw-r--r--   1 root root    287790 Sep 19  1999 ./source/a/minicom/lrzsz_0.12.21.orig.tar.gz
--rw-r--r--   1 root root    822499 Feb  1 21:16 ./source/a/minicom/minicom-2.5.tar.gz
--rwxr-xr-x   1 root root      4969 Feb  9 20:28 ./source/a/minicom/minicom.SlackBuild
--rw-r--r--   1 root root       570 Sep  4  2004 ./source/a/minicom/minicom.users.gz
--rw-r--r--   1 root root       781 Mar 29  2002 ./source/a/minicom/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  5 04:36 ./source/a/mkinitrd
--rw-r--r--   1 root root      3644 Apr  7 11:02 ./source/a/mkinitrd/README.initrd
--rw-r--r--   1 root root      2475 Jul 12  2010 ./source/a/mkinitrd/_initrd-tree.tar.gz
--rw-r--r--   1 root root   1884368 Mar 13 01:48 ./source/a/mkinitrd/busybox-1.18.4.tar.xz
--rw-r--r--   1 root root     24220 Mar 26 04:08 ./source/a/mkinitrd/busybox-dot-config
--rw-r--r--   1 root root     21604 Dec 18  2009 ./source/a/mkinitrd/busybox-dot-config.1.15.x
--rw-r--r--   1 root root     23672 Feb 28 03:49 ./source/a/mkinitrd/busybox-dot-config.1.17.x
--rwxr-xr-x   1 root root     10211 Mar 21 23:04 ./source/a/mkinitrd/init
--rw-r--r--   1 root root     29903 Dec 18  2009 ./source/a/mkinitrd/keymaps.tar.gz
--rw-r--r--   1 root root     21254 Apr  5 04:36 ./source/a/mkinitrd/mkinitrd
--rw-r--r--   1 root root      7669 Mar 27  2010 ./source/a/mkinitrd/mkinitrd.8
--rwxr-xr-x   1 root root      5043 Apr  5 04:37 ./source/a/mkinitrd/mkinitrd.SlackBuild
--rw-r--r--   1 root root      5898 Aug 29  2010 ./source/a/mkinitrd/mkinitrd.conf.5
--rw-r--r--   1 root root       415 Aug 29  2010 ./source/a/mkinitrd/mkinitrd.conf.sample
--rw-r--r--   1 root root     27921 Feb 17 09:27 ./source/a/mkinitrd/mkinitrd_command_generator.sh
--rw-r--r--   1 root root       988 Dec 18  2009 ./source/a/mkinitrd/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 16 22:03 ./source/a/module-init-tools
--rw-r--r--   1 root root       130 Nov 16 22:03 ./source/a/module-init-tools/doinst.sh.gz
--rw-r--r--   1 root root       676 Jun  8  2010 ./source/a/module-init-tools/modprobe.ignore_some_suffixes.diff.gz
--rw-r--r--   1 root root    938086 Jun  7  2010 ./source/a/module-init-tools/module-init-tools-3.12.tar.bz2
--rwxr-xr-x   1 root root      3632 Nov 16 22:04 ./source/a/module-init-tools/module-init-tools.SlackBuild
--rw-r--r--   1 root root       857 May 30  2009 ./source/a/module-init-tools/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/mt-st
--rw-r--r--   1 root root       375 May 15  2007 ./source/a/mt-st/_mt-st.tar.gz
--rw-r--r--   1 root root     36537 Aug 21  2005 ./source/a/mt-st/mt-st-0.9b.tar.gz
--rwxr-xr-x   1 root root      2977 Jul 28  2010 ./source/a/mt-st/mt-st.SlackBuild
--rw-r--r--   1 root root       949 Apr  7  2005 ./source/a/mt-st/mt-st.config.diff.gz
--rw-r--r--   1 root root       358 Oct 25  2005 ./source/a/mt-st/mt-st.man.diff.gz
--rw-r--r--   1 root root       236 Sep  9  2004 ./source/a/mt-st/mt-st.sdlt.diff.gz
--rw-r--r--   1 root root       943 Feb 24  2002 ./source/a/mt-st/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/mtx
--rw-r--r--   1 root root    235214 Feb 15  2009 ./source/a/mtx/mtx-1.3.12.tar.gz
--rwxr-xr-x   1 root root      3021 Jul 28  2010 ./source/a/mtx/mtx.SlackBuild
--rw-r--r--   1 root root       854 Jan 25  2007 ./source/a/mtx/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/ncompress
--rw-r--r--   1 root root     32473 Jan 29  2010 ./source/a/ncompress/ncompress-4.2.4.3.tar.gz
--rwxr-xr-x   1 root root      2865 Jul 28  2010 ./source/a/ncompress/ncompress.SlackBuild
--rw-r--r--   1 root root      1020 Dec 14  2006 ./source/a/ncompress/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 24 03:03 ./source/a/ntfs-3g
--rw-r--r--   1 root root      2067 Jan 18  2010 ./source/a/ntfs-3g/10-ntfs-3g-policy.fdi
--rw-r--r--   1 root root    559952 Jan 15 10:53 ./source/a/ntfs-3g/ntfs-3g-2011.1.15.tar.xz
--rwxr-xr-x   1 root root      4082 Aug 14  2010 ./source/a/ntfs-3g/ntfs-3g.SlackBuild
--rw-r--r--   1 root root      1003 Mar 15  2008 ./source/a/ntfs-3g/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/patch
--rw-r--r--   1 root root    239408 Dec 30  2009 ./source/a/patch/patch-2.6.1.tar.xz
--rw-r--r--   1 root root       198 Dec 30  2009 ./source/a/patch/patch-2.6.1.tar.xz.sig
--rwxr-xr-x   1 root root      3454 Jul 28  2010 ./source/a/patch/patch.SlackBuild
--rw-r--r--   1 root root      1020 Dec 14  2006 ./source/a/patch/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 14 17:14 ./source/a/pciutils
--rw-r--r--   1 root root    249428 Jan 31  2010 ./source/a/pciutils/pciutils-3.1.7.tar.xz
--rwxr-xr-x   1 root root      3525 Feb  9  2010 ./source/a/pciutils/pciutils.SlackBuild
--rw-r--r--   1 root root       306 Jul 29  2009 ./source/a/pciutils/pciutils.ids.dest.diff.gz
--rw-r--r--   1 root root        92 Apr  1  2008 ./source/a/pciutils/pciutils.url
--rw-r--r--   1 root root       895 Dec 19  2006 ./source/a/pciutils/slack-desc
-drwxr-xr-x   3 root root      4096 Feb 27 21:33 ./source/a/pcmciautils
--rw-r--r--   1 root root      1429 Mar 16  2007 ./source/a/pcmciautils/cis-cs-3.2.8.tar.gz
-drwxr-xr-x   2 root root      4096 Sep 12  2008 ./source/a/pcmciautils/config
--rw-r--r--   1 root root       926 Mar 16  2007 ./source/a/pcmciautils/config/60-pcmcia.rules
--rw-r--r--   1 root root      2577 Mar  5  2008 ./source/a/pcmciautils/config/config.opts
--rwxr-xr-x   1 root root      1722 Mar 16  2007 ./source/a/pcmciautils/config/rc.pcmcia
--rw-r--r--   1 root root       277 Apr 14  2009 ./source/a/pcmciautils/doinst.sh.gz
--rw-r--r--   1 root root     43721 Jan  6  2010 ./source/a/pcmciautils/pcmciautils-017.tar.bz2
--rw-r--r--   1 root root       248 Jan  6  2010 ./source/a/pcmciautils/pcmciautils-017.tar.sign
--rwxr-xr-x   1 root root      3871 Feb 27 21:40 ./source/a/pcmciautils/pcmciautils.SlackBuild
--rw-r--r--   1 root root       914 Apr 14  2009 ./source/a/pcmciautils/slack-desc
-drwxr-xr-x   5 root root      4096 Mar  7 18:47 ./source/a/pkgtools
-drwxr-xr-x   2 root root      4096 Apr 11  2009 ./source/a/pkgtools/manpages
--rw-r--r--   1 root root      1256 Apr 11  2009 ./source/a/pkgtools/manpages/explodepkg.8
--rw-r--r--   1 root root      3065 Mar 18 21:22 ./source/a/pkgtools/manpages/installpkg.8
--rw-r--r--   1 root root      4557 Apr 11  2009 ./source/a/pkgtools/manpages/makepkg.8
--rw-r--r--   1 root root      2518 Apr 11  2009 ./source/a/pkgtools/manpages/pkgtool.8
--rw-r--r--   1 root root      3080 Apr 11  2009 ./source/a/pkgtools/manpages/removepkg.8
--rw-r--r--   1 root root      3199 Jun  7  2001 ./source/a/pkgtools/manpages/setup.8-deprecated
--rw-r--r--   1 root root      2665 Apr 11  2009 ./source/a/pkgtools/manpages/upgradepkg.8
-drwxr-xr-x   2 root root      4096 Apr 19  2008 ./source/a/pkgtools/obsolete-scripts
--rw-r--r--   1 root root       155 Apr 19  2008 ./source/a/pkgtools/obsolete-scripts/README
--rw-r--r--   1 root root      1326 Feb 16  2003 ./source/a/pkgtools/obsolete-scripts/setup.90.modem-device
--rwxr-xr-x   1 root root      2496 Apr 22 20:51 ./source/a/pkgtools/pkgtools.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 18 21:19 ./source/a/pkgtools/scripts
--rw-r--r--   1 root root      3169 May 11  2010 ./source/a/pkgtools/scripts/explodepkg
--rw-r--r--   1 root root     20490 Apr 22 20:50 ./source/a/pkgtools/scripts/installpkg
--rw-r--r--   1 root root     13749 Apr  6  2009 ./source/a/pkgtools/scripts/makebootdisk
--rw-r--r--   1 root root     11315 Jun  2  2009 ./source/a/pkgtools/scripts/makepkg
--rw-r--r--   1 root root     22665 Mar  7 18:14 ./source/a/pkgtools/scripts/pkgtool
--rw-r--r--   1 root root     14048 Apr 28  2009 ./source/a/pkgtools/scripts/removepkg
--rw-r--r--   1 root root       170 Feb 16  2003 ./source/a/pkgtools/scripts/setup.70.install-kernel
--rw-r--r--   1 root root      6356 Mar 18  2008 ./source/a/pkgtools/scripts/setup.80.make-bootdisk
--rw-r--r--   1 root root      1070 Jun 27  2007 ./source/a/pkgtools/scripts/setup.htmlview
--rw-r--r--   1 root root      7421 Mar 19  2008 ./source/a/pkgtools/scripts/setup.services
--rw-r--r--   1 root root     12135 May 11  2010 ./source/a/pkgtools/scripts/upgradepkg
--rw-r--r--   1 root root      1083 Mar 23  2002 ./source/a/pkgtools/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 29 18:34 ./source/a/procps
--rw-r--r--   1 root root     24365 Mar  2  2001 ./source/a/procps/procinfo-18.tar.gz
--rw-r--r--   1 root root       213 Feb  7  2003 ./source/a/procps/procinfo.gcc3.diff.gz
--rw-r--r--   1 root root       504 Mar  2  2001 ./source/a/procps/procinfo.lsm
--rw-r--r--   1 root root      1056 Mar 28 16:20 ./source/a/procps/procps-3.2.7-ps-cgroup.patch.gz
--rw-r--r--   1 root root       824 Sep 19  2008 ./source/a/procps/procps-3.2.7-ps-eip64.diff.gz
--rw-r--r--   1 root root       513 Mar 28 16:21 ./source/a/procps/procps-3.2.8-ps-cgroup-suppress-root-group.patch.gz
--rw-r--r--   1 root root    217784 May 10  2009 ./source/a/procps/procps-3.2.8.tar.xz
--rw-r--r--   1 root root       596 Mar 29 18:34 ./source/a/procps/procps-3.2.8.unknown.hz.value.diff.gz
--rwxr-xr-x   1 root root      6745 Mar 29 18:38 ./source/a/procps/procps.SlackBuild
--rw-r--r--   1 root root       854 Aug 17  2004 ./source/a/procps/procps.nowarning.diff.gz
--rw-r--r--   1 root root       182 Feb  2  2003 ./source/a/procps/procps.w.showfrom.diff.gz
--rw-r--r--   1 root root    245676 Sep  6  2010 ./source/a/procps/psmisc-22.13.tar.xz
--rw-r--r--   1 root root       739 May 27  2004 ./source/a/procps/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 22  2009 ./source/a/quota
--rw-r--r--   1 root root    216356 Jan  5  2009 ./source/a/quota/quota-3.17.tar.xz
--rwxr-xr-x   1 root root      3814 Jul 28  2010 ./source/a/quota/quota.SlackBuild
--rw-r--r--   1 root root       980 Mar 31  2002 ./source/a/quota/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/reiserfsprogs
--rw-r--r--   1 root root    324847 Jan 12  2009 ./source/a/reiserfsprogs/reiserfsprogs-3.6.21.tar.bz2
--rwxr-xr-x   1 root root      3783 Jul 28  2010 ./source/a/reiserfsprogs/reiserfsprogs.SlackBuild
--rw-r--r--   1 root root       940 Feb 11  2008 ./source/a/reiserfsprogs/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 30  2010 ./source/a/rpm2tgz
--rw-r--r--   1 root root      1809 Nov 27  2002 ./source/a/rpm2tgz/getrpmtype.tar.gz
-drwxr-xr-x   2 root root      4096 Aug  7  2010 ./source/a/rpm2tgz/patches
--rw-r--r--   1 root root       567 Apr 30  2010 ./source/a/rpm2tgz/patches/0001-fix-d-handling.patch.gz
--rw-r--r--   1 root root       651 Apr 30  2010 ./source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz
--rw-r--r--   1 root root       521 Apr 30  2010 ./source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch.gz
--rw-r--r--   1 root root       707 Apr 30  2010 ./source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch.gz
--rw-r--r--   1 root root       792 Apr 30  2010 ./source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch.gz
--rw-r--r--   1 root root       755 Apr 30  2010 ./source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch.gz
--rw-r--r--   1 root root       969 Aug  7  2010 ./source/a/rpm2tgz/patches/0007-Add-support-for-.txz-packages-and-rpm2txz-symlink.patch.gz
--rw-r--r--   1 root root       674 Aug  7  2010 ./source/a/rpm2tgz/patches/0008-Avoid-none-values-in-slack-desc.patch.gz
--rw-r--r--   1 root root      1057 Aug  7  2010 ./source/a/rpm2tgz/patches/0009-Add-c-option-just-as-makepkg-c-y.patch.gz
--rw-r--r--   1 root root      7333 Feb 18  2010 ./source/a/rpm2tgz/rpm2targz
--rw-r--r--   1 root root       986 Dec 23  2006 ./source/a/rpm2tgz/rpm2targz.README
--rwxr-xr-x   1 root root      3821 Aug  7  2010 ./source/a/rpm2tgz/rpm2tgz.SlackBuild
--rw-r--r--   1 root root       854 Feb 23  2010 ./source/a/rpm2tgz/rpmoffset.c
--rw-r--r--   1 root root       856 Feb 11  2008 ./source/a/rpm2tgz/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 16 05:37 ./source/a/sdparm
--rw-r--r--   1 root root    218904 Nov 11 15:50 ./source/a/sdparm/sdparm-1.06.tar.xz
--rwxr-xr-x   1 root root      3879 Feb 12  2010 ./source/a/sdparm/sdparm.SlackBuild
--rw-r--r--   1 root root       924 Jun  2  2007 ./source/a/sdparm/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  6  2009 ./source/a/sed
--rw-r--r--   1 root root    728284 Jun 29  2009 ./source/a/sed/sed-4.2.1.tar.xz
--rwxr-xr-x   1 root root      3342 Dec  6  2009 ./source/a/sed/sed.SlackBuild
--rw-r--r--   1 root root       862 May 30  2009 ./source/a/sed/slack-desc
-drwxr-xr-x   3 root root      4096 Mar 24 03:06 ./source/a/shadow
--rw-r--r--   1 root root     15623 Jan 13  2010 ./source/a/shadow/adduser
--rw-r--r--   1 root root       290 Jan 28  2010 ./source/a/shadow/doinst.sh.gz
--rw-r--r--   1 root root      4551 Jan 28  2010 ./source/a/shadow/login.defs.gz
-drwxr-xr-x   2 root root      4096 Mar 24 03:26 ./source/a/shadow/patches
--rw-r--r--   1 root root       415 Mar 24 02:47 ./source/a/shadow/patches/README_PATCHES
--rw-r--r--   1 root root       365 Mar 24 02:47 ./source/a/shadow/patches/r3054.diff.gz
--rw-r--r--   1 root root      7828 Mar 24 02:47 ./source/a/shadow/patches/r3055.diff.gz
--rw-r--r--   1 root root       671 Mar 24 02:47 ./source/a/shadow/patches/r3060.diff.gz
--rw-r--r--   1 root root       888 Mar 24 02:47 ./source/a/shadow/patches/r3062.diff.gz
--rw-r--r--   1 root root       314 Mar 24 02:47 ./source/a/shadow/patches/r3096.diff.gz
--rw-r--r--   1 root root      3291 Mar 24 02:47 ./source/a/shadow/patches/r3160.diff.gz
--rw-r--r--   1 root root       273 Mar 24 02:47 ./source/a/shadow/patches/r3194.diff.gz
--rw-r--r--   1 root root       173 Mar 24 02:47 ./source/a/shadow/patches/r3299.diff.gz
--rw-r--r--   1 root root   1295904 Feb 15 23:55 ./source/a/shadow/shadow-4.1.4.3.tar.xz
--rwxr-xr-x   1 root root      4865 Apr 11 04:20 ./source/a/shadow/shadow.SlackBuild
--rw-r--r--   1 root root        50 Mar 24 03:05 ./source/a/shadow/shadow.url
--rw-r--r--   1 root root       993 Apr 30  2002 ./source/a/shadow/slack-desc
--rw-r--r--   1 root root       142 Feb 28  2010 ./source/a/shadow/useradd.gz
-drwxr-xr-x   2 root root      4096 Feb  7 19:16 ./source/a/sharutils
--rw-r--r--   1 root root    761964 Feb  5 19:34 ./source/a/sharutils/sharutils-4.11.tar.xz
--rwxr-xr-x   1 root root      3543 Feb  7 19:28 ./source/a/sharutils/sharutils.SlackBuild
--rw-r--r--   1 root root      1087 May 19  2006 ./source/a/sharutils/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 30  2009 ./source/a/slocate
--rw-r--r--   1 root root       941 Jul 18  2009 ./source/a/slocate/_slocate.tar.gz
--rw-r--r--   1 root root      1011 Apr  7  2002 ./source/a/slocate/slack-desc
--rw-r--r--   1 root root     37748 Mar  8  2006 ./source/a/slocate/slocate-3.1.tar.gz
--rw-r--r--   1 root root       189 Mar  8  2006 ./source/a/slocate/slocate-3.1.tar.gz.sign
--rwxr-xr-x   1 root root      2705 Jul 28  2010 ./source/a/slocate/slocate.SlackBuild
-drwxr-xr-x   2 root root      4096 Jan 27 19:05 ./source/a/smartmontools
--rw-r--r--   1 root root       270 Apr 12  2004 ./source/a/smartmontools/doinst.sh.gz
--rw-r--r--   1 root root      1174 Oct 21  2002 ./source/a/smartmontools/slack-desc
--rw-r--r--   1 root root    515092 Oct 16  2010 ./source/a/smartmontools/smartmontools-5.40.tar.xz
--rwxr-xr-x   1 root root      3187 Jan 27 19:24 ./source/a/smartmontools/smartmontools.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/splitvt
--rw-r--r--   1 root root       743 Dec 13  2006 ./source/a/splitvt/slack-desc
--rw-r--r--   1 root root     64301 Jan 18  2001 ./source/a/splitvt/splitvt-1.6.5.tar.gz
--rwxr-xr-x   1 root root      2556 Jul 28  2010 ./source/a/splitvt/splitvt.SlackBuild
--rw-r--r--   1 root root     10403 Jul 19  2005 ./source/a/splitvt/splitvt_1.6.5-9.diff.gz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/sysfsutils
--rw-r--r--   1 root root      1005 Aug  3  2006 ./source/a/sysfsutils/slack-desc
--rw-r--r--   1 root root    288189 Dec 12  2006 ./source/a/sysfsutils/sysfsutils-2.1.0.tar.bz2
--rwxr-xr-x   1 root root      3470 Jul 28  2010 ./source/a/sysfsutils/sysfsutils.SlackBuild
-drwxr-xr-x   3 root root      4096 Oct 14  2010 ./source/a/sysklogd
-drwxr-xr-x   2 root root      4096 Oct 14  2010 ./source/a/sysklogd/config
--rw-r--r--   1 root root       981 Apr  9  2007 ./source/a/sysklogd/config/rc.syslog.new
--rw-r--r--   1 root root      1573 Mar 14  2003 ./source/a/sysklogd/config/syslog.conf.new
--rw-r--r--   1 root root       239 Jun  8  2003 ./source/a/sysklogd/config/syslog.logrotate
--rw-r--r--   1 root root       380 Oct 14  2010 ./source/a/sysklogd/doinst.sh.gz
--rw-r--r--   1 root root       916 Mar 23  2002 ./source/a/sysklogd/slack-desc
--rw-r--r--   1 root root     86557 Jul 29  2007 ./source/a/sysklogd/sysklogd-1.5.tar.gz
--rwxr-xr-x   1 root root      3423 Oct 14  2010 ./source/a/sysklogd/sysklogd.SlackBuild
--rw-r--r--   1 root root       382 Oct 14  2010 ./source/a/sysklogd/use_memmove_not_strcpy.diff.gz
-drwxr-xr-x   2 root root      4096 Jan 25  2010 ./source/a/syslinux
--rw-r--r--   1 root root       977 Mar 22  2002 ./source/a/syslinux/slack-desc
--rw-r--r--   1 root root   3383248 Dec 18  2009 ./source/a/syslinux/syslinux-3.84.tar.bz2
--rw-r--r--   1 root root       248 Dec 18  2009 ./source/a/syslinux/syslinux-3.84.tar.bz2.sign
--rwxr-xr-x   1 root root      3103 Jan 25  2010 ./source/a/syslinux/syslinux.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/sysvinit
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/sysvinit-functions
--rw-r--r--   1 root root       832 Apr 29  2007 ./source/a/sysvinit-functions/README.functions
--rw-r--r--   1 root root       226 May 15  2007 ./source/a/sysvinit-functions/doinst.sh.gz
--rw-r--r--   1 root root     10001 Apr 29  2007 ./source/a/sysvinit-functions/function-src-8.53.tar.bz2
--rw-r--r--   1 root root     13913 Oct 26  2006 ./source/a/sysvinit-functions/functions
--rw-r--r--   1 root root      1164 May 15  2007 ./source/a/sysvinit-functions/slack-desc
--rwxr-xr-x   1 root root      3323 Jul 28  2010 ./source/a/sysvinit-functions/sysvinit-functions.SlackBuild
-drwxr-xr-x   3 root root      4096 Apr 23 19:57 ./source/a/sysvinit-scripts
--rw-r--r--   1 root root       342 Apr 23 19:41 ./source/a/sysvinit-scripts/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Apr 23 19:40 ./source/a/sysvinit-scripts/scripts
--rw-r--r--   1 root root        60 Aug  1  2006 ./source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh
--rw-r--r--   1 root root      2344 Mar 26 01:38 ./source/a/sysvinit-scripts/scripts/inittab
--rw-r--r--   1 root root      1282 Mar 27  2007 ./source/a/sysvinit-scripts/scripts/rc.4
--rw-r--r--   1 root root      7677 Apr 16 21:14 ./source/a/sysvinit-scripts/scripts/rc.6
--rw-r--r--   1 root root      2893 Apr 16 21:14 ./source/a/sysvinit-scripts/scripts/rc.K
--rw-r--r--   1 root root     11475 Mar 22 06:15 ./source/a/sysvinit-scripts/scripts/rc.M
--rw-r--r--   1 root root     14581 Apr 23 19:37 ./source/a/sysvinit-scripts/scripts/rc.S
--rw-r--r--   1 root root       272 Aug 12  2006 ./source/a/sysvinit-scripts/scripts/rc.local
--rw-r--r--   1 root root       168 Apr 23 19:40 ./source/a/sysvinit-scripts/scripts/rc.loop
--rw-r--r--   1 root root      1740 Sep 11  1999 ./source/a/sysvinit-scripts/scripts/rc.sysvinit
--rw-r--r--   1 root root     20491 Aug 10  2010 ./source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
--rw-r--r--   1 root root       846 May 15  2007 ./source/a/sysvinit-scripts/slack-desc
--rwxr-xr-x   1 root root      2185 Apr 23 19:41 ./source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
--rw-r--r--   1 root root       681 Apr 16  2007 ./source/a/sysvinit/doinst.sh.gz
--rw-r--r--   1 root root       972 Mar 22  2002 ./source/a/sysvinit/slack-desc
--rw-r--r--   1 root root       489 Sep 22  2008 ./source/a/sysvinit/sysvinit-2.86-timeval.patch.gz
--rw-r--r--   1 root root     99009 Dec  8  2006 ./source/a/sysvinit/sysvinit-2.86.tar.gz
--rwxr-xr-x   1 root root      4105 Jul 28  2010 ./source/a/sysvinit/sysvinit.SlackBuild
--rw-r--r--   1 root root      1729 Apr  3  2008 ./source/a/sysvinit/sysvinit.diff.gz
--rw-r--r--   1 root root      1107 Dec 19  2005 ./source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 12 17:59 ./source/a/tar
--rw-r--r--   1 root root      2429 Jan  7  1995 ./source/a/tar/rmt.8.gz
--rw-r--r--   1 root root       834 Mar 23  2002 ./source/a/tar/slack-desc
--rw-r--r--   1 root root       949 Nov 30  2006 ./source/a/tar/tar-1.13.bzip2.diff.gz
--rw-r--r--   1 root root   1052531 Jul  8  1999 ./source/a/tar/tar-1.13.tar.gz
--rw-r--r--   1 root root   1783904 Mar 12 10:50 ./source/a/tar/tar-1.26.tar.xz
--rw-r--r--   1 root root       189 Mar 12 10:50 ./source/a/tar/tar-1.26.tar.xz.sig
--rw-r--r--   1 root root       230 Mar 16  2010 ./source/a/tar/tar-1.2x.support_txz.diff.gz
--rw-r--r--   1 root root      2682 Oct 27 02:22 ./source/a/tar/tar.1.gz
--rwxr-xr-x   1 root root      4848 Apr 14 18:21 ./source/a/tar/tar.SlackBuild
--rw-r--r--   1 root root       509 Nov  8 19:42 ./source/a/tar/tar.nolonezero.diff.gz
--rw-r--r--   1 root root       377 Mar 16  2010 ./source/a/tar/tar.norecordsizespam.diff.gz
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/tcsh
--rw-r--r--   1 root root       146 Aug  6  1995 ./source/a/tcsh/doinst.sh.gz
--rw-r--r--   1 root root       886 Mar 23  2002 ./source/a/tcsh/slack-desc
--rw-r--r--   1 root root    670184 Jul 10  2009 ./source/a/tcsh/tcsh-6.17.00.tar.xz
--rwxr-xr-x   1 root root      3278 Jul 28  2010 ./source/a/tcsh/tcsh.SlackBuild
--rw-r--r--   1 root root       202 Feb  9  2006 ./source/a/tcsh/tcsh.nobuiltincolorls.diff.gz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/time
--rw-r--r--   1 root root       887 Feb 11  2008 ./source/a/time/slack-desc
--rw-r--r--   1 root root    103066 Jul 11  1996 ./source/a/time/time-1.7.tar.gz
--rwxr-xr-x   1 root root      2538 Jul 28  2010 ./source/a/time/time.SlackBuild
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/tree
--rw-r--r--   1 root root       873 Dec 23  2006 ./source/a/tree/slack-desc
--rw-r--r--   1 root root     32133 Nov 24  2009 ./source/a/tree/tree-1.5.3.tar.bz2
--rwxr-xr-x   1 root root      2528 Jul 28  2010 ./source/a/tree/tree.SlackBuild
-drwxr-xr-x   3 root root      4096 Jan  5 07:29 ./source/a/udev
-drwxr-xr-x   6 root root      4096 Aug 14  2009 ./source/a/udev/config
-drwxr-xr-x   2 root root      4096 Aug 14  2009 ./source/a/udev/config/modprobe.d
--rw-r--r--   1 root root      6251 Aug 14  2009 ./source/a/udev/config/modprobe.d/blacklist.conf.new
--rw-r--r--   1 root root       443 May 30  2009 ./source/a/udev/config/modprobe.d/isapnp.conf.new
--rw-r--r--   1 root root       265 Aug 14  2009 ./source/a/udev/config/modprobe.d/psmouse.conf.new
--rw-r--r--   1 root root       244 May 30  2009 ./source/a/udev/config/modprobe.d/usb-controller.conf.new
-drwxr-xr-x   2 root root      4096 Jan 14  2010 ./source/a/udev/config/rc.d
--rw-r--r--   1 root root      5058 Dec 13 18:51 ./source/a/udev/config/rc.d/rc.udev.new
-drwxr-xr-x   2 root root      4096 Dec  2  2009 ./source/a/udev/config/rules.d
--rw-r--r--   1 root root       538 Nov 19 17:27 ./source/a/udev/config/rules.d/40-slackware.rules
--rw-r--r--   1 root root      1847 Apr 20  2010 ./source/a/udev/config/rules.d/59-non-libata-devices.rules
--rw-r--r--   1 root root      1380 Apr 20  2010 ./source/a/udev/config/rules.d/65-permissions.rules
--rw-r--r--   1 root root       305 May 30  2009 ./source/a/udev/config/rules.d/90-network.rules
-drwxr-xr-x   2 root root      4096 May 30  2009 ./source/a/udev/config/scripts
--rwxr-xr-x   1 root root      1978 May 30  2009 ./source/a/udev/config/scripts/nethelper.sh
--rw-r--r--   1 root root       489 Nov  6 03:46 ./source/a/udev/config/udev.conf
--rw-r--r--   1 root root       588 Dec 17 16:48 ./source/a/udev/doinst.sh.gz
--rw-r--r--   1 root root       803 Jul  7  2010 ./source/a/udev/rule_generator.diff.gz
--rw-r--r--   1 root root       825 May 30  2009 ./source/a/udev/slack-desc
--rw-r--r--   1 root root    478564 Dec 16 12:36 ./source/a/udev/udev-165.tar.xz
--rw-r--r--   1 root root       381 May 29  2010 ./source/a/udev/udev-fixed-devices.tar.gz
--rwxr-xr-x   1 root root      5111 Jan  5 07:29 ./source/a/udev/udev.SlackBuild
--rw-r--r--   1 root root      3887 Jan  5 07:11 ./source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch.gz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/unarj
--rw-r--r--   1 root root       269 Dec 23  2006 ./source/a/unarj/Makefile.gz
--rw-r--r--   1 root root       848 Dec 23  2006 ./source/a/unarj/slack-desc
--rwxr-xr-x   1 root root      2268 Jul 28  2010 ./source/a/unarj/unarj.SlackBuild
--rw-r--r--   1 root root     23151 Jun  5  2002 ./source/a/unarj/unarj265.tar.gz
-drwxr-xr-x   2 root root      4096 Dec 31 03:40 ./source/a/usb_modeswitch
--rw-r--r--   1 root root      9312 Dec 22 23:38 ./source/a/usb_modeswitch/device_reference.txt.gz
--rw-r--r--   1 root root       272 Apr 30  2010 ./source/a/usb_modeswitch/doinst.sh.gz
--rw-r--r--   1 root root      1185 Apr 30  2010 ./source/a/usb_modeswitch/slack-desc
--rw-r--r--   1 root root     40247 Dec 22 23:32 ./source/a/usb_modeswitch/usb-modeswitch-1.1.6.tar.bz2
--rw-r--r--   1 root root     16871 Dec 22 23:32 ./source/a/usb_modeswitch/usb-modeswitch-data-20101222.tar.bz2
--rwxr-xr-x   1 root root      4299 Dec 31 03:40 ./source/a/usb_modeswitch/usb_modeswitch.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 17 23:49 ./source/a/usbutils
--rw-r--r--   1 root root       781 May 30  2009 ./source/a/usbutils/slack-desc
--rw-r--r--   1 root root    475212 Mar 17 23:21 ./source/a/usbutils/usbutils-002.tar.bz2
--rw-r--r--   1 root root       249 Mar 17 23:21 ./source/a/usbutils/usbutils-002.tar.bz2.sign
--rwxr-xr-x   1 root root      4564 Mar 17 23:50 ./source/a/usbutils/usbutils.SlackBuild
--rw-r--r--   1 root root       220 May 30  2009 ./source/a/usbutils/usbutils.ids.dest.gz
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/utempter
--rw-r--r--   1 root root       230 Dec 12  2006 ./source/a/utempter/doinst.sh.gz
--rw-r--r--   1 root root     14588 Feb 19  2007 ./source/a/utempter/libutempter-1.1.5.tar.bz2
--rw-r--r--   1 root root       189 Feb 19  2007 ./source/a/utempter/libutempter-1.1.5.tar.bz2.asc
--rw-r--r--   1 root root       809 Jun  8  2003 ./source/a/utempter/slack-desc
--rwxr-xr-x   1 root root      3118 Jul 28  2010 ./source/a/utempter/utempter.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb 11 17:05 ./source/a/util-linux
--rw-r--r--   1 root root     43150 May 30  2009 ./source/a/util-linux/adjtimex_1.23-1.diff.gz
--rw-r--r--   1 root root     56580 May 30  2009 ./source/a/util-linux/adjtimex_1.23.orig.tar.gz
--rw-r--r--   1 root root      4513 May 30  2009 ./source/a/util-linux/bsdstrings.tar.gz
--rw-r--r--   1 root root       337 May 30  2009 ./source/a/util-linux/doinst.sh.gz
--rw-r--r--   1 root root    179192 May 30  2009 ./source/a/util-linux/net-tools-1.60.tar.xz
--rw-r--r--   1 root root       650 May 30  2009 ./source/a/util-linux/net-tools.diff.gz
--rw-r--r--   1 root root    173444 May 30  2009 ./source/a/util-linux/net-tools_1.60-19.diff.gz
--rw-r--r--   1 root root      1266 May 30  2009 ./source/a/util-linux/scsi_ioctl.h
--rw-r--r--   1 root root     52437 May 30  2009 ./source/a/util-linux/setserial-2.17.tar.gz
--rw-r--r--   1 root root       729 May 30  2009 ./source/a/util-linux/setserial-rc.serial.diff.gz
--rw-r--r--   1 root root       376 Mar 30  2010 ./source/a/util-linux/setserial-undef_TIOCGHAYESESP.diff.gz
--rw-r--r--   1 root root       784 Feb 16 06:11 ./source/a/util-linux/slack-desc
--rw-r--r--   1 root root   2690604 Feb 10 09:15 ./source/a/util-linux/util-linux-2.19.tar.xz
--rwxr-xr-x   1 root root      9358 Feb 16 04:46 ./source/a/util-linux/util-linux.SlackBuild
--rw-r--r--   1 root root       299 May 30  2009 ./source/a/util-linux/util-linux.fdisk-no-solaris.diff.gz
--rw-r--r--   1 root root     10292 May 30  2009 ./source/a/util-linux/ziptool-1.4.0.tar.xz
--rw-r--r--   1 root root       386 May 30  2009 ./source/a/util-linux/ziptool-fix_build.patch.gz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/a/which
--rw-r--r--   1 root root      1038 Dec 14  2006 ./source/a/which/slack-desc
--rw-r--r--   1 root root    135372 Aug  6  2008 ./source/a/which/which-2.20.tar.gz
--rw-r--r--   1 root root       152 Aug  6  2008 ./source/a/which/which-2.20.tar.gz.sig
--rwxr-xr-x   1 root root      3081 Jul 28  2010 ./source/a/which/which.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 22 22:34 ./source/a/xfsprogs
--rw-r--r--   1 root root       954 Feb 21  2006 ./source/a/xfsprogs/slack-desc
--rw-r--r--   1 root root    925100 Nov 11 17:41 ./source/a/xfsprogs/xfsprogs-3.1.4.tar.xz
--rwxr-xr-x   1 root root      4530 Jul 12  2010 ./source/a/xfsprogs/xfsprogs.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr  6 03:46 ./source/a/xz
--rw-r--r--   1 root root       952 Apr  8  2009 ./source/a/xz/slack-desc
--rw-r--r--   1 root root   1023720 Apr  1 10:11 ./source/a/xz/xz-5.0.2.tar.bz2
--rw-r--r--   1 root root       543 Apr  1 10:11 ./source/a/xz/xz-5.0.2.tar.bz2.sig
--rwxr-xr-x   1 root root      4822 Apr  6 03:46 ./source/a/xz/xz.SlackBuild
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/a/zoo
--rw-r--r--   1 root root       996 Dec 14  2006 ./source/a/zoo/slack-desc
--rw-r--r--   1 root root    173607 Dec 30  1994 ./source/a/zoo/zoo-2.10.tar.gz
--rwxr-xr-x   1 root root      2802 Jul 28  2010 ./source/a/zoo/zoo.SlackBuild
--rw-r--r--   1 root root     14136 May 22  2010 ./source/a/zoo/zoo_2.10-22.debian.tar.gz
-drwxr-xr-x  73 root root      4096 Apr 22 17:37 ./source/ap
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/a2ps
--rw-r--r--   1 root root   1814364 Dec 29  2007 ./source/ap/a2ps/a2ps-4.14.tar.bz2
--rwxr-xr-x   1 root root      5426 Jul 28  2010 ./source/ap/a2ps/a2ps.SlackBuild
--rw-r--r--   1 root root       298 Mar 31  2009 ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff.gz
--rw-r--r--   1 root root       249 Jan 19  2001 ./source/ap/a2ps/a2ps.diff.gz
--rw-r--r--   1 root root     62039 Aug 28  1997 ./source/ap/a2ps/psutils-1.17.tar.gz
--rw-r--r--   1 root root       574 Mar  4  2009 ./source/ap/a2ps/psutils.destdir.diff.gz
--rw-r--r--   1 root root       471 Jan 19  2001 ./source/ap/a2ps/psutils.diff.gz
--rw-r--r--   1 root root       900 Mar 29  2002 ./source/ap/a2ps/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/acct
--rw-r--r--   1 root root    448772 Apr 27  2010 ./source/ap/acct/acct-6.5.4.tar.xz
--rwxr-xr-x   1 root root      4580 Jul 28  2010 ./source/ap/acct/acct.SlackBuild
--rw-r--r--   1 root root       320 Jul 28  2010 ./source/ap/acct/acct.logdir.fhs.diff.gz
--rw-r--r--   1 root root      1054 Nov 12  2008 ./source/ap/acct/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 05:53 ./source/ap/alsa-utils
--rw-r--r--   1 root root   1130734 Jan 31 14:27 ./source/ap/alsa-utils/alsa-utils-1.0.24.2.tar.bz2
--rwxr-xr-x   1 root root      4076 Feb  9 05:47 ./source/ap/alsa-utils/alsa-utils.SlackBuild
--rw-r--r--   1 root root       989 May 30  2010 ./source/ap/alsa-utils/alsa-utils.alsaconf.diff.gz
--rw-r--r--   1 root root       178 Feb  9 05:53 ./source/ap/alsa-utils/doinst.sh.gz
--rw-r--r--   1 root root      1109 Feb  9 05:46 ./source/ap/alsa-utils/rc.alsa.gz
--rw-r--r--   1 root root      1086 Aug 29  2003 ./source/ap/alsa-utils/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/amp
--rw-r--r--   1 root root       236 Feb 24  2002 ./source/ap/amp/_amp.tar.gz
--rw-r--r--   1 root root    100337 Mar 17  1999 ./source/ap/amp/amp-0.7.6.tar.gz
--rw-r--r--   1 root root       239 Oct  1  2008 ./source/ap/amp/amp-gcc34.diff.gz
--rwxr-xr-x   1 root root      2279 Jul 28  2010 ./source/ap/amp/amp.SlackBuild
--rw-r--r--   1 root root      1514 Mar 17  1999 ./source/ap/amp/license_excerpts
--rw-r--r--   1 root root       729 Mar 29  2002 ./source/ap/amp/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 25  2010 ./source/ap/ash
--rw-r--r--   1 root root    121233 Jan 12  2001 ./source/ap/ash/ash-0.4.0.tar.gz
--rwxr-xr-x   1 root root      3066 Apr 25  2010 ./source/ap/ash/ash.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr 25  2010 ./source/ap/ash/patches
--rw-r--r--   1 root root      6275 Jun  2  2002 ./source/ap/ash/patches/ash-builtin.patch.gz
--rw-r--r--   1 root root      6506 Jun  2  2002 ./source/ap/ash/patches/ash-debian.patch.gz
--rw-r--r--   1 root root       832 Jun  2  2002 ./source/ap/ash/patches/ash-echo.patch.gz
--rw-r--r--   1 root root       707 Jun  2  2002 ./source/ap/ash/patches/ash-freebsd.patch.gz
--rw-r--r--   1 root root       312 Jun  2  2002 ./source/ap/ash/patches/ash-getcwd.patch.gz
--rw-r--r--   1 root root      1585 Jun  2  2002 ./source/ap/ash/patches/ash-getopt.patch.gz
--rw-r--r--   1 root root      2937 Jun  2  2002 ./source/ap/ash/patches/ash-glob.patch.gz
--rw-r--r--   1 root root      4556 Apr 25  2010 ./source/ap/ash/patches/ash-hetio.patch.gz
--rw-r--r--   1 root root      1004 Jun  2  2002 ./source/ap/ash/patches/ash-jobs.patch.gz
--rw-r--r--   1 root root      5625 Jun  2  2002 ./source/ap/ash/patches/ash-kill.patch.gz
--rw-r--r--   1 root root      1338 Jun  2  2002 ./source/ap/ash/patches/ash-makefile.patch.gz
--rw-r--r--   1 root root       718 Jun  2  2002 ./source/ap/ash/patches/ash-manpage.patch.gz
--rw-r--r--   1 root root      2357 Jun  2  2002 ./source/ap/ash/patches/ash-memout.patch.gz
--rw-r--r--   1 root root      1499 Jun  2  2002 ./source/ap/ash/patches/ash-misc.patch.gz
--rw-r--r--   1 root root       388 Jun  2  2002 ./source/ap/ash/patches/ash-ppid.patch.gz
--rw-r--r--   1 root root      3928 Jun  2  2002 ./source/ap/ash/patches/ash-redir.patch.gz
--rw-r--r--   1 root root      4570 Jun  2  2002 ./source/ap/ash/patches/ash-setmode.patch.gz
--rw-r--r--   1 root root       261 Jun  2  2002 ./source/ap/ash/patches/ash-sighup.patch.gz
--rw-r--r--   1 root root      2215 Jun  2  2002 ./source/ap/ash/patches/ash-syntax.patch.gz
--rw-r--r--   1 root root      3668 Jun  2  2002 ./source/ap/ash/patches/ash-test.patch.gz
--rw-r--r--   1 root root       585 Jun  2  2002 ./source/ap/ash/patches/ash-times.patch.gz
--rw-r--r--   1 root root       979 Jun  2  2002 ./source/ap/ash/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/at
--rw-r--r--   1 root root     98664 Nov 30  2009 ./source/ap/at/at-3.1.12.tar.xz
--rwxr-xr-x   1 root root      3362 Jul 28  2010 ./source/ap/at/at.SlackBuild
--rw-r--r--   1 root root       414 Aug  3  2006 ./source/ap/at/doinst.sh.gz
--rw-r--r--   1 root root       737 Nov 23  2003 ./source/ap/at/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/aumix
--rw-r--r--   1 root root    194652 May  9  2010 ./source/ap/aumix/aumix-2.9.1.tar.xz
--rwxr-xr-x   1 root root      2561 Jul 28  2010 ./source/ap/aumix/aumix.SlackBuild
--rw-r--r--   1 root root       764 Jun  5  2002 ./source/ap/aumix/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/bc
--rw-r--r--   1 root root    290069 Sep  5  2006 ./source/ap/bc/bc-1.06.95.tar.bz2
--rw-r--r--   1 root root       184 Sep  5  2006 ./source/ap/bc/bc-1.06.95.tar.bz2.sig
--rwxr-xr-x   1 root root      3568 Jul 28  2010 ./source/ap/bc/bc.SlackBuild
--rw-r--r--   1 root root       839 May 13  2002 ./source/ap/bc/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/bpe
--rw-r--r--   1 root root    115498 Jan  2  2001 ./source/ap/bpe/bpe-2.01.00.tar.gz
--rwxr-xr-x   1 root root      2498 Jul 28  2010 ./source/ap/bpe/bpe.SlackBuild
--rw-r--r--   1 root root       789 Jun  6  2004 ./source/ap/bpe/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/cdparanoia
--rw-r--r--   1 root root    183236 Sep 11  2008 ./source/ap/cdparanoia/cdparanoia-III-10.2.src.tar.gz
--rw-r--r--   1 root root      3327 Oct 19  2008 ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch.gz
--rwxr-xr-x   1 root root      4199 Jul 28  2010 ./source/ap/cdparanoia/cdparanoia.SlackBuild
--rw-r--r--   1 root root      1056 Nov 17  2007 ./source/ap/cdparanoia/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/cdrdao
--rw-r--r--   1 root root   1180112 Jul 11  2010 ./source/ap/cdrdao/cdrdao-1.2.3.tar.xz
--rwxr-xr-x   1 root root      2862 Jul 28  2010 ./source/ap/cdrdao/cdrdao.SlackBuild
--rw-r--r--   1 root root       753 Mar 23  2002 ./source/ap/cdrdao/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 22 00:54 ./source/ap/cdrtools
--rw-r--r--   1 root root   1672524 Dec 21 11:10 ./source/ap/cdrtools/cdrtools-3.01a02.tar.xz
--rwxr-xr-x   1 root root      5526 Dec 22 00:53 ./source/ap/cdrtools/cdrtools.SlackBuild
--rw-r--r--   1 root root       269 Dec 29  2009 ./source/ap/cdrtools/doinst.sh.gz
--rw-r--r--   1 root root       868 Feb 11  2008 ./source/ap/cdrtools/slack-desc
--rw-r--r--   1 root root     52968 May 17  2007 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2
--rw-r--r--   1 root root       248 May 17  2007 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2.sign
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/dc3dd
--rw-r--r--   1 root root   2138588 Mar 19  2009 ./source/ap/dc3dd/dc3dd-6.12.3.tar.xz
--rwxr-xr-x   1 root root      3338 Jul 28  2010 ./source/ap/dc3dd/dc3dd.SlackBuild
--rw-r--r--   1 root root       913 Feb 14  2009 ./source/ap/dc3dd/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 25 20:30 ./source/ap/ddrescue
--rw-r--r--   1 root root     48812 Jan 11 18:52 ./source/ap/ddrescue/ddrescue-1.14.tar.xz
--rwxr-xr-x   1 root root      3940 Feb 25 20:33 ./source/ap/ddrescue/ddrescue.SlackBuild
--rw-r--r--   1 root root       924 Feb 25 20:34 ./source/ap/ddrescue/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/diffstat
--rw-r--r--   1 root root    165236 Jul 19  2010 ./source/ap/diffstat/diffstat-1.53.tar.xz
--rwxr-xr-x   1 root root      3410 Jul 28  2010 ./source/ap/diffstat/diffstat.SlackBuild
--rw-r--r--   1 root root       868 Sep 20  2006 ./source/ap/diffstat/slack-desc
-drwxr-xr-x   2 root root      4096 May 10  2010 ./source/ap/diffutils
--rw-r--r--   1 root root   1023932 May  3  2010 ./source/ap/diffutils/diffutils-3.0.tar.xz
--rw-r--r--   1 root root       373 Feb 14  2010 ./source/ap/diffutils/diffutils-sdiff-no-waitpid.patch.gz
--rwxr-xr-x   1 root root      3803 May 10  2010 ./source/ap/diffutils/diffutils.SlackBuild
--rw-r--r--   1 root root       321 Aug 21  2006 ./source/ap/diffutils/doinst.sh.gz
--rw-r--r--   1 root root       743 Mar 23  2002 ./source/ap/diffutils/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 13  2009 ./source/ap/dmapi
--rw-r--r--   1 root root    196416 May  5  2009 ./source/ap/dmapi/dmapi-2.2.10.tar.xz
--rwxr-xr-x   1 root root      3798 Jul 28  2010 ./source/ap/dmapi/dmapi.SlackBuild
--rw-r--r--   1 root root       526 Apr  1  2008 ./source/ap/dmapi/dmapi.destdir.diff.gz
--rw-r--r--   1 root root       804 Feb 21  2006 ./source/ap/dmapi/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 19 20:28 ./source/ap/dmidecode
--rw-r--r--   1 root root     54537 Jan 19 15:00 ./source/ap/dmidecode/dmidecode-2.11.tar.bz2
--rw-r--r--   1 root root        96 Jan 19 15:00 ./source/ap/dmidecode/dmidecode-2.11.tar.bz2.sig
--rwxr-xr-x   1 root root      3252 Mar 19 20:29 ./source/ap/dmidecode/dmidecode.SlackBuild
--rw-r--r--   1 root root       215 May  2  2007 ./source/ap/dmidecode/dmidecode.makefile.diff.gz
--rw-r--r--   1 root root       933 May  2  2007 ./source/ap/dmidecode/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/dvd+rw-tools
--rw-r--r--   1 root root    140846 Mar  5  2008 ./source/ap/dvd+rw-tools/dvd+rw-tools-7.1.tar.gz
--rwxr-xr-x   1 root root      2743 Apr 14 18:30 ./source/ap/dvd+rw-tools/dvd+rw-tools.SlackBuild
--rw-r--r--   1 root root       185 Apr  7  2008 ./source/ap/dvd+rw-tools/dvd+rw-tools.limits.h.diff.gz
--rw-r--r--   1 root root        49 Sep  2  2003 ./source/ap/dvd+rw-tools/dvd+rw-tools.url
--rw-r--r--   1 root root       823 Feb 11  2008 ./source/ap/dvd+rw-tools/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/enscript
--rw-r--r--   1 root root    804704 Jun  1  2010 ./source/ap/enscript/enscript-1.6.5.2.tar.xz
--rwxr-xr-x   1 root root      3920 Jul 28  2010 ./source/ap/enscript/enscript.SlackBuild
--rw-r--r--   1 root root       920 Mar 23  2002 ./source/ap/enscript/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  9 20:08 ./source/ap/flac
--rw-r--r--   1 root root   1143864 Sep 18  2007 ./source/ap/flac/flac-1.2.1.tar.xz
--rwxr-xr-x   1 root root      4004 Mar  9 20:07 ./source/ap/flac/flac.SlackBuild
--rw-r--r--   1 root root       214 Mar  9 20:08 ./source/ap/flac/flac.gcc45.diff.gz
--rw-r--r--   1 root root       371 Mar  8  2008 ./source/ap/flac/flac.man.diff.gz
--rw-r--r--   1 root root      1058 Aug 26  2002 ./source/ap/flac/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  1 20:05 ./source/ap/foomatic-filters
--rw-r--r--   1 root root       275 Sep 26  2007 ./source/ap/foomatic-filters/doinst.sh.gz
--rw-r--r--   1 root root    244365 Dec 15 16:19 ./source/ap/foomatic-filters/foomatic-filters-4.0.6.tar.gz
--rwxr-xr-x   1 root root      4353 Feb 16  2010 ./source/ap/foomatic-filters/foomatic-filters.SlackBuild
--rw-r--r--   1 root root      1104 Feb 11  2008 ./source/ap/foomatic-filters/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 28 19:25 ./source/ap/ghostscript
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/ghostscript-fonts-std
--rw-r--r--   1 root root       165 Feb 19  2007 ./source/ap/ghostscript-fonts-std/doinst.sh.gz
--rw-r--r--   1 root root   3621829 Jul 24  2003 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std-8.11.tar.bz2
--rwxr-xr-x   1 root root      2267 May 19  2009 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std.SlackBuild
--rw-r--r--   1 root root       840 Feb 19  2007 ./source/ap/ghostscript-fonts-std/slack-desc
--rw-r--r--   1 root root      1436 Apr 11  2008 ./source/ap/ghostscript/cidfmap.gz
--rw-r--r--   1 root root  17377160 Sep 19  2010 ./source/ap/ghostscript/ghostscript-9.00.tar.xz
--rwxr-xr-x   1 root root      5447 Dec 28 19:26 ./source/ap/ghostscript/ghostscript.SlackBuild
--rw-r--r--   1 root root       355 Dec 28 19:25 ./source/ap/ghostscript/ghostscript.rev11948.diff.gz
--rw-r--r--   1 root root      1011 Mar  2  2008 ./source/ap/ghostscript/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 27 08:43 ./source/ap/gphoto2
--rw-r--r--   1 root root    471332 Aug 15  2010 ./source/ap/gphoto2/gphoto2-2.4.10.tar.xz
--rwxr-xr-x   1 root root      3613 Feb 14  2010 ./source/ap/gphoto2/gphoto2.SlackBuild
--rw-r--r--   1 root root       762 Sep 11  2008 ./source/ap/gphoto2/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 27 19:32 ./source/ap/groff
--rw-r--r--   1 root root   2480692 Dec 31 07:47 ./source/ap/groff/groff-1.21.tar.xz
--rwxr-xr-x   1 root root      4717 Jan 27 19:38 ./source/ap/groff/groff.SlackBuild
--rw-r--r--   1 root root       459 Jun 23  2005 ./source/ap/groff/groff.man.mdoc.local.gz
--rw-r--r--   1 root root       887 Mar 23  2002 ./source/ap/groff/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 27 22:10 ./source/ap/gutenprint
--rw-r--r--   1 root root   4068468 Aug 11  2010 ./source/ap/gutenprint/gutenprint-5.2.6.tar.xz
--rwxr-xr-x   1 root root      4073 Nov 27 22:11 ./source/ap/gutenprint/gutenprint.SlackBuild
--rw-r--r--   1 root root      1010 Aug 12  2006 ./source/ap/gutenprint/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 27 03:04 ./source/ap/hplip
--rw-r--r--   1 root root       118 Mar  5  2009 ./source/ap/hplip/doinst.sh.gz
--rw-r--r--   1 root root  15190340 Mar 25 08:31 ./source/ap/hplip/hplip-3.11.3a.tar.xz
--rwxr-xr-x   1 root root      3889 Jan 29 02:00 ./source/ap/hplip/hplip.SlackBuild
--rw-r--r--   1 root root       935 Mar  5  2009 ./source/ap/hplip/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/ispell
--rw-r--r--   1 root root    580742 Aug  1  2001 ./source/ap/ispell/ispell-3.2.06.tar.gz
--rwxr-xr-x   1 root root      3345 Jul 28  2010 ./source/ap/ispell/ispell.SlackBuild
--rw-r--r--   1 root root      5808 Jun  8  2001 ./source/ap/ispell/ispell.diff.gz
--rw-r--r--   1 root root      1057 Mar 23  2002 ./source/ap/ispell/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 18  2010 ./source/ap/jed
--rw-r--r--   1 root root    884198 Dec 14  2009 ./source/ap/jed/jed-0.99-19.tar.bz2
--rw-r--r--   1 root root       261 Dec 14  2009 ./source/ap/jed/jed-0.99-19.tar.bz2.asc
--rwxr-xr-x   1 root root      3136 Feb 18  2010 ./source/ap/jed/jed.SlackBuild
--rw-r--r--   1 root root       938 Mar 23  2002 ./source/ap/jed/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/joe
--rw-r--r--   1 root root    443056 Jul 28  2010 ./source/ap/joe/joe-3.7.tar.xz
--rwxr-xr-x   1 root root      3113 Jul 28  2010 ./source/ap/joe/joe.SlackBuild
--rw-r--r--   1 root root       599 Feb 24  2002 ./source/ap/joe/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/jove
--rwxr-xr-x   1 root root      3166 Jul 28  2010 ./source/ap/jove/jove.SlackBuild
--rw-r--r--   1 root root      1709 Mar  4  2009 ./source/ap/jove/jove.makefile.diff.gz
--rw-r--r--   1 root root    357932 Jul 11  2010 ./source/ap/jove/jove4.16.0.73.tar.xz
--rw-r--r--   1 root root       792 Mar  4  2009 ./source/ap/jove/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/ksh93
--rw-r--r--   1 root root     12885 Dec 16  2004 ./source/ap/ksh93/CPL
--rw-r--r--   1 root root    362425 Jul 28  2010 ./source/ap/ksh93/INIT.2010-06-21.tgz
--rw-r--r--   1 root root    721167 Jul 28  2010 ./source/ap/ksh93/ast-ksh-locale.2010-02-02.tgz
--rw-r--r--   1 root root   1914305 Jul 28  2010 ./source/ap/ksh93/ast-ksh.2010-06-21.tgz
--rwxr-xr-x   1 root root      5254 Jul 28  2010 ./source/ap/ksh93/ksh93.SlackBuild
--rw-r--r--   1 root root       996 Mar 23  2002 ./source/ap/ksh93/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/libx86
--rw-r--r--   1 root root     87428 May 19  2008 ./source/ap/libx86/libx86-1.1.tar.gz
--rwxr-xr-x   1 root root      2943 Jul 28  2010 ./source/ap/libx86/libx86.SlackBuild
--rw-r--r--   1 root root       127 Nov 24  2008 ./source/ap/libx86/libx86.info
--rw-r--r--   1 root root       324 Nov 24  2008 ./source/ap/libx86/lrmi.c.diff.gz
--rw-r--r--   1 root root       769 Nov 24  2008 ./source/ap/libx86/slack-desc
-drwxr-xr-x   4 root root      4096 Mar 21 18:02 ./source/ap/linuxdoc-tools
--rw-r--r--   1 root root      7047 Mar 21 17:40 ./source/ap/linuxdoc-tools/ChangeLog.txt
-drwxr-xr-x   2 root root      4096 Oct  4  2005 ./source/ap/linuxdoc-tools/arm
--rwxr-xr-x   1 root root      1593 Nov  4 17:09 ./source/ap/linuxdoc-tools/arm/build
--rwxr-xr-x   1 root root        28 Feb  5  2006 ./source/ap/linuxdoc-tools/linuxdoc-tools.SlackBuild
--rwxr-xr-x   1 root root     31071 Mar 21 17:38 ./source/ap/linuxdoc-tools/linuxdoc-tools.build
--rwxr-xr-x   1 root root      2786 Feb 10  2010 ./source/ap/linuxdoc-tools/postbuildfixes.sh
--rw-r--r--   1 root root      1166 Jun 26  2006 ./source/ap/linuxdoc-tools/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 17:38 ./source/ap/linuxdoc-tools/sources
--rw-r--r--   1 root root    647972 Oct  3  2010 ./source/ap/linuxdoc-tools/sources/asciidoc-8.6.2.tar.xz
--rw-r--r--   1 root root      1280 Nov 11 19:31 ./source/ap/linuxdoc-tools/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff.xz
--rw-r--r--   1 root root    224920 May  5  2007 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-1.79.tar.xz
--rw-r--r--   1 root root    134196 Nov 12  2004 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-doc-1.79.tar.xz
--rw-r--r--   1 root root   2986317 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/docbook-style-xsl-1.75.2-6.fc14.src.rpm
--rw-r--r--   1 root root    166203 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/docbook-utils-0.6.14-24.fc14.src.rpm
--rw-r--r--   1 root root     98497 Oct 26  2006 ./source/ap/linuxdoc-tools/sources/docbook-xml-4.5.zip
--rw-r--r--   1 root root    133260 Apr 11  2007 ./source/ap/linuxdoc-tools/sources/docbook_4.5.orig.tar.xz
--rw-r--r--   1 root root    505208 Jan 10 17:23 ./source/ap/linuxdoc-tools/sources/gnome-doc-utils-0.20.4.tar.xz
--rw-r--r--   1 root root    601476 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/gtk-doc-1.15.tar.xz
--rw-r--r--   1 root root       632 Oct 19  2010 ./source/ap/linuxdoc-tools/sources/gtk-doc.patch.xz
--rw-r--r--   1 root root      7808 Jan  4  2008 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii-32.diff.xz
--rw-r--r--   1 root root     68364 Apr 15  2001 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii.orig.tar.xz
--rw-r--r--   1 root root    630479 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/linuxdoc-tools-0.9.66-6.fc14.src.rpm
--rw-r--r--   1 root root    711620 Apr 18  2003 ./source/ap/linuxdoc-tools/sources/openjade-1.3.3-pre1.tar.xz
--rw-r--r--   1 root root   1525065 Aug 12  2009 ./source/ap/linuxdoc-tools/sources/opensp-1.5.2-12.fc12.src.rpm
--rw-r--r--   1 root root     95000 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/sgml-common-0.6.3-33.fc14.src.rpm
--rwxr-xr-x   1 root root      4631 Oct 19  2010 ./source/ap/linuxdoc-tools/sources/source.download
--rw-r--r--   1 root root    117791 Jul 25  2010 ./source/ap/linuxdoc-tools/sources/xmlto-0.0.23-3.fc13.src.rpm
--rwxr-xr-x   1 root root      2813 Mar 21 17:39 ./source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/ap/lm_sensors
--rw-r--r--   1 root root    157644 Feb  2  2010 ./source/ap/lm_sensors/lm_sensors-3.1.2.tar.bz2
--rw-r--r--   1 root root        65 Feb  2  2010 ./source/ap/lm_sensors/lm_sensors-3.1.2.tar.bz2.sig
--rwxr-xr-x   1 root root      3728 May  3  2010 ./source/ap/lm_sensors/lm_sensors.SlackBuild
--rw-r--r--   1 root root       312 Oct 26  2008 ./source/ap/lm_sensors/lm_sensors.makefile.diff.gz
--rw-r--r--   1 root root      1105 Sep 20  2006 ./source/ap/lm_sensors/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 13  2010 ./source/ap/lsof
--rwxr-xr-x   1 root root      2744 Mar 13  2010 ./source/ap/lsof/lsof.SlackBuild
--rw-r--r--   1 root root    753094 Jan 18  2010 ./source/ap/lsof/lsof_4.83.tar.bz2
--rw-r--r--   1 root root       152 Jan 18  2010 ./source/ap/lsof/lsof_4.83.tar.bz2.sig
--rw-r--r--   1 root root       789 Mar 17  2002 ./source/ap/lsof/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 24 23:51 ./source/ap/lsscsi
--rw-r--r--   1 root root     97740 Dec 24 22:00 ./source/ap/lsscsi/lsscsi-0.24.tar.xz
--rwxr-xr-x   1 root root      3547 Jul 28  2010 ./source/ap/lsscsi/lsscsi.SlackBuild
--rw-r--r--   1 root root        36 Nov 29  2008 ./source/ap/lsscsi/lsscsi.url
--rw-r--r--   1 root root       825 May  2  2007 ./source/ap/lsscsi/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 12 21:02 ./source/ap/lxc
--rw-r--r--   1 root root    274417 Feb 26 09:21 ./source/ap/lxc/lxc-0.7.4.tar.gz
--rwxr-xr-x   1 root root      4104 Mar 15 22:32 ./source/ap/lxc/lxc.SlackBuild
--rw-r--r--   1 root root       961 Feb  8 20:34 ./source/ap/lxc/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  2 18:03 ./source/ap/madplay
--rw-r--r--   1 root root       285 Apr  2 17:59 ./source/ap/madplay/madplay-0.15.2b-fix-segfault.patch.gz
--rw-r--r--   1 root root    361360 Feb 23  2004 ./source/ap/madplay/madplay-0.15.2b.tar.xz
--rwxr-xr-x   1 root root      2848 Apr  2 18:03 ./source/ap/madplay/madplay.SlackBuild
--rw-r--r--   1 root root       797 Sep 10  2003 ./source/ap/madplay/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  4 23:42 ./source/ap/man
-drwxr-xr-x   2 root root      4096 Dec  3 18:59 ./source/ap/man-pages
--rw-r--r--   1 root root       147 Jul 17  2008 ./source/ap/man-pages/doinst.sh.gz
--rw-r--r--   1 root root   1134370 Dec  3 07:09 ./source/ap/man-pages/man-pages-3.32.tar.bz2
--rw-r--r--   1 root root    971300 Jun 17  2008 ./source/ap/man-pages/man-pages-posix-2003-a.tar.bz2
--rwxr-xr-x   1 root root      3752 Feb 28  2010 ./source/ap/man-pages/man-pages.SlackBuild
--rw-r--r--   1 root root       950 Jul 17  2008 ./source/ap/man-pages/slack-desc
--rw-r--r--   1 root root    156268 Jun 14  2009 ./source/ap/man-pages/whatis.sample.xz
--rw-r--r--   1 root root       274 Apr  9  2008 ./source/ap/man/doinst.sh.gz
--rw-r--r--   1 root root       215 Aug  9  2009 ./source/ap/man/man-1.6f.nroff.mandoc.diff.gz
--rw-r--r--   1 root root    213636 Jan  1 01:06 ./source/ap/man/man-1.6g.tar.xz
--rwxr-xr-x   1 root root      3351 Jan  4 23:47 ./source/ap/man/man.SlackBuild
--rw-r--r--   1 root root       901 Mar 23  2002 ./source/ap/man/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 11 23:06 ./source/ap/mc
--rw-r--r--   1 root root   1944452 Apr 11 11:33 ./source/ap/mc/mc-4.7.5.2.tar.xz
--rwxr-xr-x   1 root root      3769 Apr 11 23:06 ./source/ap/mc/mc.SlackBuild
--rw-r--r--   1 root root       239 Nov 11 20:34 ./source/ap/mc/mc.ext.in.geeqie.diff.gz
-drwxr-xr-x   2 root root      4096 Jul 14  2009 ./source/ap/mc/profile.d
--rwxr-xr-x   1 root root       389 Nov 29  2008 ./source/ap/mc/profile.d/mc-wrapper.csh
--rwxr-xr-x   1 root root       315 Nov 29  2008 ./source/ap/mc/profile.d/mc-wrapper.sh
--rwxr-xr-x   1 root root        51 Nov 29  2008 ./source/ap/mc/profile.d/mc.csh
--rwxr-xr-x   1 root root        45 Nov 29  2008 ./source/ap/mc/profile.d/mc.sh
--rw-r--r--   1 root root       904 Feb 26  2002 ./source/ap/mc/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 23 01:10 ./source/ap/moc
--rw-r--r--   1 root root    430508 Sep 25  2009 ./source/ap/moc/moc-2.5.0-alpha4.tar.xz
--rwxr-xr-x   1 root root      4103 Jan 23 00:45 ./source/ap/moc/moc.SlackBuild
--rw-r--r--   1 root root       874 Jan 23 00:34 ./source/ap/moc/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 22  2009 ./source/ap/most
--rw-r--r--   1 root root    131130 Sep  9  2007 ./source/ap/most/most-5.0.0a.tar.bz2
--rwxr-xr-x   1 root root      2950 Jul 28  2010 ./source/ap/most/most.SlackBuild
--rw-r--r--   1 root root       833 Jun  6  2003 ./source/ap/most/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 22 17:35 ./source/ap/mpg123
--rw-r--r--   1 root root    626808 Apr 21 16:07 ./source/ap/mpg123/mpg123-1.13.3.tar.xz
--rwxr-xr-x   1 root root      5421 Mar 10 21:15 ./source/ap/mpg123/mpg123.SlackBuild
--rw-r--r--   1 root root       788 Dec 15  2009 ./source/ap/mpg123/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  5 21:56 ./source/ap/mysql
--rw-r--r--   1 root root       330 Oct  2  2008 ./source/ap/mysql/doinst.sh.gz
--rw-r--r--   1 root root  13378736 Feb 11 19:50 ./source/ap/mysql/mysql-5.1.56.tar.xz
--rwxr-xr-x   1 root root      1739 Feb 10 20:10 ./source/ap/mysql/mysql-embedded.build
--rwxr-xr-x   1 root root      6493 Nov 21 02:42 ./source/ap/mysql/mysql.SlackBuild
--rw-r--r--   1 root root      1208 Apr 17  2008 ./source/ap/mysql/rc.mysqld.gz
--rw-r--r--   1 root root       816 Mar 23  2002 ./source/ap/mysql/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  1 18:18 ./source/ap/nano
--rw-r--r--   1 root root    831212 Feb 26 14:36 ./source/ap/nano/nano-2.3.0.tar.xz
--rwxr-xr-x   1 root root      3981 Feb 16  2010 ./source/ap/nano/nano.SlackBuild
--rw-r--r--   1 root root       870 Apr  7  2007 ./source/ap/nano/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 10  2009 ./source/ap/normalize
--rw-r--r--   1 root root    388777 Sep 14  2005 ./source/ap/normalize/normalize-0.7.7.tar.bz2
--rwxr-xr-x   1 root root      2751 Jul 28  2010 ./source/ap/normalize/normalize.SlackBuild
--rw-r--r--   1 root root       971 May 25  2004 ./source/ap/normalize/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/ntfsprogs
--rw-r--r--   1 root root    678114 Sep 29  2007 ./source/ap/ntfsprogs/ntfsprogs-2.0.0.tar.bz2
--rwxr-xr-x   1 root root      3877 Jul 28  2010 ./source/ap/ntfsprogs/ntfsprogs.SlackBuild
--rw-r--r--   1 root root      1064 Feb 29  2008 ./source/ap/ntfsprogs/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  3 06:38 ./source/ap/pm-utils
--rw-r--r--   1 root root       168 Dec 30 23:12 ./source/ap/pm-utils/49bluetooth-generic
--rw-r--r--   1 root root      6659 Dec 30 02:48 ./source/ap/pm-utils/README.SLACKWARE
--rw-r--r--   1 root root       635 Jan  3 06:36 ./source/ap/pm-utils/fix-wrong-path-in-intel-audio-powersave.patch.gz
--rw-r--r--   1 root root     10033 Jun 19  2010 ./source/ap/pm-utils/pm-quirks-20100619.tar.gz
--rw-r--r--   1 root root    208687 Jul  4  2010 ./source/ap/pm-utils/pm-utils-1.4.1.tar.gz
--rwxr-xr-x   1 root root      4656 Jan  3 06:40 ./source/ap/pm-utils/pm-utils.SlackBuild
--rw-r--r--   1 root root        32 Apr 14  2009 ./source/ap/pm-utils/pm-utils.url
--rw-r--r--   1 root root       835 Apr 14  2009 ./source/ap/pm-utils/slack-desc
--rw-r--r--   1 root root       343 Dec 27 20:23 ./source/ap/pm-utils/use_more_sane_harddrive_defaults.patch.gz
-drwxr-xr-x   2 root root      4096 Jan  2 23:00 ./source/ap/powertop
--rw-r--r--   1 root root    104675 Jul 23  2010 ./source/ap/powertop/powertop-1.13.tar.gz
--rwxr-xr-x   1 root root      3152 May  4  2010 ./source/ap/powertop/powertop.SlackBuild
--rw-r--r--   1 root root      1007 May  4  2010 ./source/ap/powertop/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25  2010 ./source/ap/radeontool
--rw-r--r--   1 root root    338446 Mar 24  2010 ./source/ap/radeontool/radeontool-1.6.1.tar.bz2
--rwxr-xr-x   1 root root      2915 Jul 28  2010 ./source/ap/radeontool/radeontool.SlackBuild
--rw-r--r--   1 root root       802 Nov 24  2008 ./source/ap/radeontool/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/rexima
--rw-r--r--   1 root root     15903 Jul  1  2003 ./source/ap/rexima/rexima-1.4.tar.gz
--rwxr-xr-x   1 root root      2381 Jul 28  2010 ./source/ap/rexima/rexima.SlackBuild
--rw-r--r--   1 root root       829 May 29  2002 ./source/ap/rexima/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  3 20:02 ./source/ap/rpm
--rw-r--r--   1 root root       133 Nov 27  2009 ./source/ap/rpm/Packages.gz
--rw-r--r--   1 root root       132 Nov 27  2009 ./source/ap/rpm/doinst.sh.gz
--rw-r--r--   1 root root   2978736 Jun 11  2010 ./source/ap/rpm/rpm-4.8.1.tar.xz
--rwxr-xr-x   1 root root      4386 Dec  3 20:05 ./source/ap/rpm/rpm.SlackBuild
--rw-r--r--   1 root root       948 Nov 27  2009 ./source/ap/rpm/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/rzip
--rw-r--r--   1 root root     46785 Feb 14  2006 ./source/ap/rzip/rzip-2.1.tar.gz
--rwxr-xr-x   1 root root      2749 Jul 28  2010 ./source/ap/rzip/rzip.SlackBuild
--rw-r--r--   1 root root       723 Jun  3  2004 ./source/ap/rzip/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/sc
--rw-r--r--   1 root root       309 Aug  3  1999 ./source/ap/sc/_sc.tar.gz
--rw-r--r--   1 root root      4598 May  3  2010 ./source/ap/sc/sc-7.16-3.diff.gz
--rw-r--r--   1 root root       636 Sep 20  2002 ./source/ap/sc/sc-7.16.lsm
--rw-r--r--   1 root root    210809 Sep 20  2002 ./source/ap/sc/sc-7.16.tar.gz
--rwxr-xr-x   1 root root      2976 Jul 28  2010 ./source/ap/sc/sc.SlackBuild
--rw-r--r--   1 root root       576 Feb 24  2002 ./source/ap/sc/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/screen
--rw-r--r--   1 root root    741741 Oct 23  2006 ./source/ap/screen/screen-4.0.3.tar.bz2
--rwxr-xr-x   1 root root      4054 Jul 28  2010 ./source/ap/screen/screen.SlackBuild
--rw-r--r--   1 root root      1111 Mar 23  2002 ./source/ap/screen/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/seejpeg
--rw-r--r--   1 root root       227 Apr 30  2000 ./source/ap/seejpeg/_seejpeg.tar.gz
--rw-r--r--   1 root root    500701 Jul 25  1996 ./source/ap/seejpeg/libjpeg-6a.tar.gz
--rw-r--r--   1 root root       654 Apr 30  2000 ./source/ap/seejpeg/seejpeg-1.10.diff.gz
--rw-r--r--   1 root root       855 Nov  9  1999 ./source/ap/seejpeg/seejpeg-1.10.lsm
--rw-r--r--   1 root root     46550 Nov  9  1999 ./source/ap/seejpeg/seejpeg-1.10.tgz
--rwxr-xr-x   1 root root      2557 Jul 28  2010 ./source/ap/seejpeg/seejpeg.SlackBuild
--rw-r--r--   1 root root       913 Mar 23  2002 ./source/ap/seejpeg/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25 06:59 ./source/ap/slackpkg
--rw-r--r--   1 root root        69 Nov 21  2008 ./source/ap/slackpkg/README
-drwxr-xr-x   2 root root      4096 Apr  2 22:34 ./source/ap/sox
--rw-r--r--   1 root root       749 Apr  2 22:32 ./source/ap/sox/slack-desc
--rw-r--r--   1 root root    748360 Feb 27 22:00 ./source/ap/sox/sox-14.3.2.tar.xz
--rwxr-xr-x   1 root root      3569 Apr  2 22:36 ./source/ap/sox/sox.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr  1 02:37 ./source/ap/sqlite
--rw-r--r--   1 root root      1684 Aug  1  2008 ./source/ap/sqlite/COPYRIGHT.gz
--rw-r--r--   1 root root       942 Aug  1  2008 ./source/ap/sqlite/slack-desc
--rw-r--r--   1 root root   2352132 Feb  1 01:38 ./source/ap/sqlite/sqlite-src-3070500.tar.xz
--rwxr-xr-x   1 root root      4084 Apr  1 02:47 ./source/ap/sqlite/sqlite.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb  9 20:55 ./source/ap/sudo
--rw-r--r--   1 root root       275 Sep 19  2004 ./source/ap/sudo/doinst.sh.gz
--rw-r--r--   1 root root       869 Mar 23  2002 ./source/ap/sudo/slack-desc
--rw-r--r--   1 root root    966234 Jan 19 14:32 ./source/ap/sudo/sudo-1.7.4p6.tar.gz
--rw-r--r--   1 root root        72 Jan 19 14:32 ./source/ap/sudo/sudo-1.7.4p6.tar.gz.sig
--rwxr-xr-x   1 root root      3736 Feb  9 20:55 ./source/ap/sudo/sudo.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr 25  2010 ./source/ap/sysstat
--rw-r--r--   1 root root       527 Aug 30  2009 ./source/ap/sysstat/doinst.sh.gz
--rw-r--r--   1 root root       902 Aug 30  2009 ./source/ap/sysstat/slack-desc
--rw-r--r--   1 root root    243939 Feb 28  2010 ./source/ap/sysstat/sysstat-9.0.6.1.tar.bz2
--rwxr-xr-x   1 root root      5157 Apr 25  2010 ./source/ap/sysstat/sysstat.SlackBuild
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/ap/texinfo
--rw-r--r--   1 root root      5853 Nov 20  2008 ./source/ap/texinfo/dir.gz
--rw-r--r--   1 root root       251 Nov 21  2008 ./source/ap/texinfo/doinst.sh.gz
--rw-r--r--   1 root root      1074 Mar 22  2002 ./source/ap/texinfo/slack-desc
--rw-r--r--   1 root root   1969110 Sep 29  2008 ./source/ap/texinfo/texinfo-4.13a.tar.bz2
--rwxr-xr-x   1 root root      3166 Jul 28  2010 ./source/ap/texinfo/texinfo.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/ap/vbetool
--rw-r--r--   1 root root       833 Nov 24  2008 ./source/ap/vbetool/slack-desc
--rw-r--r--   1 root root    182826 May 16  2008 ./source/ap/vbetool/vbetool-1.1.tar.gz
--rwxr-xr-x   1 root root      2844 Jul 28  2010 ./source/ap/vbetool/vbetool.SlackBuild
--rw-r--r--   1 root root       129 Nov 24  2008 ./source/ap/vbetool/vbetool.info
-drwxr-xr-x   3 root root      4096 Mar 28 19:08 ./source/ap/vim
--rw-r--r--   1 root root    479927 Jul  9  2009 ./source/ap/vim/ctags-5.8.tar.gz
--rw-r--r--   1 root root       118 Aug 23  2006 ./source/ap/vim/doinst.sh.gz
--rw-r--r--   1 root root      4203 Feb 16  2007 ./source/ap/vim/gvim.desktop
--rw-r--r--   1 root root      8249 Jan 19  2006 ./source/ap/vim/gvim.png
-drwxr-xr-x   2 root root      4096 Apr  4 05:15 ./source/ap/vim/patches
--rw-r--r--   1 root root       843 Aug 16  2010 ./source/ap/vim/patches/7.3.001.gz
--rw-r--r--   1 root root       793 Aug 16  2010 ./source/ap/vim/patches/7.3.002.gz
--rw-r--r--   1 root root       698 Aug 17  2010 ./source/ap/vim/patches/7.3.003.gz
--rw-r--r--   1 root root       699 Sep 14  2010 ./source/ap/vim/patches/7.3.004.gz
--rw-r--r--   1 root root      1104 Sep 14  2010 ./source/ap/vim/patches/7.3.005.gz
--rw-r--r--   1 root root      1152 Sep 18  2010 ./source/ap/vim/patches/7.3.006.gz
--rw-r--r--   1 root root      1686 Sep 21  2010 ./source/ap/vim/patches/7.3.007.gz
--rw-r--r--   1 root root      2949 Sep 21  2010 ./source/ap/vim/patches/7.3.008.gz
--rw-r--r--   1 root root      1466 Sep 21  2010 ./source/ap/vim/patches/7.3.009.gz
--rw-r--r--   1 root root      1828 Sep 21  2010 ./source/ap/vim/patches/7.3.010.gz
--rw-r--r--   1 root root      2699 Sep 21  2010 ./source/ap/vim/patches/7.3.011.gz
--rw-r--r--   1 root root       830 Sep 29  2010 ./source/ap/vim/patches/7.3.012.gz
--rw-r--r--   1 root root      2016 Sep 29  2010 ./source/ap/vim/patches/7.3.013.gz
--rw-r--r--   1 root root      1105 Sep 29  2010 ./source/ap/vim/patches/7.3.014.gz
--rw-r--r--   1 root root       932 Sep 29  2010 ./source/ap/vim/patches/7.3.015.gz
--rw-r--r--   1 root root      2154 Sep 29  2010 ./source/ap/vim/patches/7.3.016.gz
--rw-r--r--   1 root root      1427 Sep 29  2010 ./source/ap/vim/patches/7.3.017.gz
--rw-r--r--   1 root root       989 Sep 29  2010 ./source/ap/vim/patches/7.3.018.gz
--rw-r--r--   1 root root       836 Sep 30  2010 ./source/ap/vim/patches/7.3.019.gz
--rw-r--r--   1 root root      1330 Oct  9  2010 ./source/ap/vim/patches/7.3.020.gz
--rw-r--r--   1 root root       958 Oct 10  2010 ./source/ap/vim/patches/7.3.021.gz
--rw-r--r--   1 root root       815 Oct 13  2010 ./source/ap/vim/patches/7.3.022.gz
--rw-r--r--   1 root root      1030 Oct 13  2010 ./source/ap/vim/patches/7.3.023.gz
--rw-r--r--   1 root root      1255 Oct 13  2010 ./source/ap/vim/patches/7.3.024.gz
--rw-r--r--   1 root root      1461 Oct 13  2010 ./source/ap/vim/patches/7.3.025.gz
--rw-r--r--   1 root root       893 Oct 13  2010 ./source/ap/vim/patches/7.3.026.gz
--rw-r--r--   1 root root      1217 Oct 13  2010 ./source/ap/vim/patches/7.3.027.gz
--rw-r--r--   1 root root      1887 Oct 14  2010 ./source/ap/vim/patches/7.3.028.gz
--rw-r--r--   1 root root      1663 Oct 15  2010 ./source/ap/vim/patches/7.3.029.gz
--rw-r--r--   1 root root      3235 Oct 20  2010 ./source/ap/vim/patches/7.3.030.gz
--rw-r--r--   1 root root      1527 Oct 20  2010 ./source/ap/vim/patches/7.3.031.gz
--rw-r--r--   1 root root      6128 Oct 20  2010 ./source/ap/vim/patches/7.3.032.gz
--rw-r--r--   1 root root       728 Oct 22  2010 ./source/ap/vim/patches/7.3.033.gz
--rw-r--r--   1 root root      3363 Oct 23  2010 ./source/ap/vim/patches/7.3.034.gz
--rw-r--r--   1 root root       878 Oct 24  2010 ./source/ap/vim/patches/7.3.035.gz
--rw-r--r--   1 root root       929 Oct 27 10:16 ./source/ap/vim/patches/7.3.036.gz
--rw-r--r--   1 root root      1509 Oct 27 10:18 ./source/ap/vim/patches/7.3.037.gz
--rw-r--r--   1 root root      1113 Oct 27 10:59 ./source/ap/vim/patches/7.3.038.gz
--rw-r--r--   1 root root      1083 Oct 27 10:59 ./source/ap/vim/patches/7.3.039.gz
--rw-r--r--   1 root root       835 Oct 27 11:39 ./source/ap/vim/patches/7.3.040.gz
--rw-r--r--   1 root root       835 Oct 27 14:02 ./source/ap/vim/patches/7.3.041.gz
--rw-r--r--   1 root root       988 Oct 27 14:18 ./source/ap/vim/patches/7.3.042.gz
--rw-r--r--   1 root root      4032 Oct 27 14:50 ./source/ap/vim/patches/7.3.043.gz
--rw-r--r--   1 root root       863 Oct 27 15:12 ./source/ap/vim/patches/7.3.044.gz
--rw-r--r--   1 root root       819 Oct 27 15:39 ./source/ap/vim/patches/7.3.045.gz
--rw-r--r--   1 root root       998 Oct 27 15:41 ./source/ap/vim/patches/7.3.046.gz
--rw-r--r--   1 root root      1309 Oct 27 16:37 ./source/ap/vim/patches/7.3.047.gz
--rw-r--r--   1 root root      1388 Nov  3 18:34 ./source/ap/vim/patches/7.3.048.gz
--rw-r--r--   1 root root      3386 Nov  4 08:46 ./source/ap/vim/patches/7.3.049.gz
--rw-r--r--   1 root root      2069 Nov  4 08:46 ./source/ap/vim/patches/7.3.050.gz
--rw-r--r--   1 root root      1350 Nov 10 14:38 ./source/ap/vim/patches/7.3.051.gz
--rw-r--r--   1 root root      2797 Nov 10 17:58 ./source/ap/vim/patches/7.3.052.gz
--rw-r--r--   1 root root      1195 Nov 10 17:58 ./source/ap/vim/patches/7.3.053.gz
--rw-r--r--   1 root root      1528 Nov 10 18:01 ./source/ap/vim/patches/7.3.054.gz
--rw-r--r--   1 root root      2770 Nov 10 19:44 ./source/ap/vim/patches/7.3.055.gz
--rw-r--r--   1 root root      3899 Nov 16 10:33 ./source/ap/vim/patches/7.3.056.gz
--rw-r--r--   1 root root      1037 Nov 16 13:07 ./source/ap/vim/patches/7.3.057.gz
--rw-r--r--   1 root root      1650 Nov 16 13:46 ./source/ap/vim/patches/7.3.058.gz
--rw-r--r--   1 root root      1464 Nov 16 14:06 ./source/ap/vim/patches/7.3.059.gz
--rw-r--r--   1 root root      2038 Nov 16 14:49 ./source/ap/vim/patches/7.3.060.gz
--rw-r--r--   1 root root      1483 Nov 16 15:26 ./source/ap/vim/patches/7.3.061.gz
--rw-r--r--   1 root root      4145 Nov 16 18:27 ./source/ap/vim/patches/7.3.062.gz
--rw-r--r--   1 root root      1019 Nov 24 11:36 ./source/ap/vim/patches/7.3.063.gz
--rw-r--r--   1 root root      1207 Nov 24 13:30 ./source/ap/vim/patches/7.3.064.gz
--rw-r--r--   1 root root      1336 Nov 24 14:52 ./source/ap/vim/patches/7.3.065.gz
--rw-r--r--   1 root root      1364 Nov 24 17:02 ./source/ap/vim/patches/7.3.066.gz
--rw-r--r--   1 root root      1074 Nov 24 17:02 ./source/ap/vim/patches/7.3.067.gz
--rw-r--r--   1 root root       830 Nov 24 17:02 ./source/ap/vim/patches/7.3.068.gz
--rw-r--r--   1 root root       869 Nov 24 17:49 ./source/ap/vim/patches/7.3.069.gz
--rw-r--r--   1 root root       808 Dec  2 13:50 ./source/ap/vim/patches/7.3.070.gz
--rw-r--r--   1 root root      1016 Dec  2 14:34 ./source/ap/vim/patches/7.3.071.gz
--rw-r--r--   1 root root      3171 Dec  2 15:08 ./source/ap/vim/patches/7.3.072.gz
--rw-r--r--   1 root root      1035 Dec  2 16:11 ./source/ap/vim/patches/7.3.073.gz
--rw-r--r--   1 root root      2448 Dec  2 20:44 ./source/ap/vim/patches/7.3.074.gz
--rw-r--r--   1 root root      1229 Dec  2 20:46 ./source/ap/vim/patches/7.3.075.gz
--rw-r--r--   1 root root      2075 Dec  8 12:13 ./source/ap/vim/patches/7.3.076.gz
--rw-r--r--   1 root root      1214 Dec  8 12:18 ./source/ap/vim/patches/7.3.077.gz
--rw-r--r--   1 root root       818 Dec  8 13:24 ./source/ap/vim/patches/7.3.078.gz
--rw-r--r--   1 root root       735 Dec  8 13:57 ./source/ap/vim/patches/7.3.079.gz
--rw-r--r--   1 root root      1811 Dec  8 16:11 ./source/ap/vim/patches/7.3.080.gz
--rw-r--r--   1 root root      1030 Dec  8 18:58 ./source/ap/vim/patches/7.3.081.gz
--rw-r--r--   1 root root       890 Dec 17 11:20 ./source/ap/vim/patches/7.3.082.gz
--rw-r--r--   1 root root      2964 Dec 17 15:28 ./source/ap/vim/patches/7.3.083.gz
--rw-r--r--   1 root root      1445 Dec 17 17:07 ./source/ap/vim/patches/7.3.084.gz
--rw-r--r--   1 root root      2407 Dec 17 17:07 ./source/ap/vim/patches/7.3.085.gz
--rw-r--r--   1 root root      1607 Dec 17 17:54 ./source/ap/vim/patches/7.3.086.gz
--rw-r--r--   1 root root      1436 Dec 17 19:27 ./source/ap/vim/patches/7.3.087.gz
--rw-r--r--   1 root root      1560 Dec 24 12:40 ./source/ap/vim/patches/7.3.088.gz
--rw-r--r--   1 root root       776 Dec 24 13:00 ./source/ap/vim/patches/7.3.089.gz
--rw-r--r--   1 root root       971 Dec 30 10:42 ./source/ap/vim/patches/7.3.090.gz
--rw-r--r--   1 root root      2776 Dec 30 11:32 ./source/ap/vim/patches/7.3.091.gz
--rw-r--r--   1 root root       799 Dec 30 13:48 ./source/ap/vim/patches/7.3.092.gz
--rw-r--r--   1 root root      1790 Dec 30 13:51 ./source/ap/vim/patches/7.3.093.gz
--rw-r--r--   1 root root       887 Dec 30 13:58 ./source/ap/vim/patches/7.3.094.gz
--rw-r--r--   1 root root       872 Jan  4 16:50 ./source/ap/vim/patches/7.3.095.gz
--rw-r--r--   1 root root      1208 Jan  4 17:13 ./source/ap/vim/patches/7.3.096.gz
--rw-r--r--   1 root root       973 Jan  4 18:04 ./source/ap/vim/patches/7.3.097.gz
--rw-r--r--   1 root root       887 Jan  4 18:26 ./source/ap/vim/patches/7.3.098.gz
--rw-r--r--   1 root root       786 Jan  8 13:47 ./source/ap/vim/patches/7.3.099.gz
--rw-r--r--   1 root root       768 Jan 17 18:51 ./source/ap/vim/patches/7.3.100.gz
--rw-r--r--   1 root root       970 Jan 17 18:54 ./source/ap/vim/patches/7.3.101.gz
--rw-r--r--   1 root root      4239 Jan 17 19:09 ./source/ap/vim/patches/7.3.102.gz
--rw-r--r--   1 root root      1481 Jan 21 23:14 ./source/ap/vim/patches/7.3.103.gz
--rw-r--r--   1 root root       812 Jan 21 23:59 ./source/ap/vim/patches/7.3.104.gz
--rw-r--r--   1 root root       852 Jan 22 00:14 ./source/ap/vim/patches/7.3.105.gz
--rw-r--r--   1 root root       811 Jan 22 20:06 ./source/ap/vim/patches/7.3.106.gz
--rw-r--r--   1 root root       980 Jan 22 20:25 ./source/ap/vim/patches/7.3.107.gz
--rw-r--r--   1 root root      1276 Feb  1 12:50 ./source/ap/vim/patches/7.3.108.gz
--rw-r--r--   1 root root      2469 Feb  1 13:01 ./source/ap/vim/patches/7.3.109.gz
--rw-r--r--   1 root root      1001 Feb  1 16:13 ./source/ap/vim/patches/7.3.110.gz
--rw-r--r--   1 root root      1575 Feb  1 17:02 ./source/ap/vim/patches/7.3.111.gz
--rw-r--r--   1 root root       951 Feb  1 20:56 ./source/ap/vim/patches/7.3.112.gz
--rw-r--r--   1 root root       870 Feb  9 13:47 ./source/ap/vim/patches/7.3.113.gz
--rw-r--r--   1 root root       844 Feb  9 15:00 ./source/ap/vim/patches/7.3.114.gz
--rw-r--r--   1 root root       826 Feb  9 15:45 ./source/ap/vim/patches/7.3.115.gz
--rw-r--r--   1 root root       870 Feb  9 16:10 ./source/ap/vim/patches/7.3.116.gz
--rw-r--r--   1 root root      1293 Feb  9 16:44 ./source/ap/vim/patches/7.3.117.gz
--rw-r--r--   1 root root       980 Feb  9 17:48 ./source/ap/vim/patches/7.3.118.gz
--rw-r--r--   1 root root       808 Feb 12 13:01 ./source/ap/vim/patches/7.3.119.gz
--rw-r--r--   1 root root      1056 Feb 15 10:58 ./source/ap/vim/patches/7.3.120.gz
--rw-r--r--   1 root root       943 Feb 15 13:25 ./source/ap/vim/patches/7.3.121.gz
--rw-r--r--   1 root root      1513 Feb 15 14:28 ./source/ap/vim/patches/7.3.122.gz
--rw-r--r--   1 root root       867 Feb 15 15:34 ./source/ap/vim/patches/7.3.123.gz
--rw-r--r--   1 root root      2267 Feb 15 16:40 ./source/ap/vim/patches/7.3.124.gz
--rw-r--r--   1 root root      1021 Feb 15 17:07 ./source/ap/vim/patches/7.3.125.gz
--rw-r--r--   1 root root       822 Feb 25 13:43 ./source/ap/vim/patches/7.3.126.gz
--rw-r--r--   1 root root       880 Feb 25 13:47 ./source/ap/vim/patches/7.3.127.gz
--rw-r--r--   1 root root       868 Feb 25 14:12 ./source/ap/vim/patches/7.3.128.gz
--rw-r--r--   1 root root      1613 Feb 25 14:14 ./source/ap/vim/patches/7.3.129.gz
--rw-r--r--   1 root root       909 Feb 25 14:16 ./source/ap/vim/patches/7.3.130.gz
--rw-r--r--   1 root root       711 Feb 25 14:18 ./source/ap/vim/patches/7.3.131.gz
--rw-r--r--   1 root root      1205 Feb 25 14:19 ./source/ap/vim/patches/7.3.132.gz
--rw-r--r--   1 root root      1321 Feb 25 15:53 ./source/ap/vim/patches/7.3.133.gz
--rw-r--r--   1 root root       730 Feb 25 16:11 ./source/ap/vim/patches/7.3.134.gz
--rw-r--r--   1 root root      1158 Feb 25 17:42 ./source/ap/vim/patches/7.3.135.gz
--rw-r--r--   1 root root       887 Mar  3 14:02 ./source/ap/vim/patches/7.3.136.gz
--rw-r--r--   1 root root      1258 Mar  3 14:05 ./source/ap/vim/patches/7.3.137.gz
--rw-r--r--   1 root root       984 Mar  3 14:55 ./source/ap/vim/patches/7.3.138.gz
--rw-r--r--   1 root root      1377 Mar 30 02:28 ./source/ap/vim/patches/7.3.139.gz
--rw-r--r--   1 root root       893 Mar 30 02:28 ./source/ap/vim/patches/7.3.140.gz
--rw-r--r--   1 root root      1303 Mar 22 13:36 ./source/ap/vim/patches/7.3.141.gz
--rw-r--r--   1 root root      1135 Mar 22 14:49 ./source/ap/vim/patches/7.3.142.gz
--rw-r--r--   1 root root     11270 Mar 22 17:12 ./source/ap/vim/patches/7.3.143.gz
--rw-r--r--   1 root root       993 Mar 26 12:57 ./source/ap/vim/patches/7.3.144.gz
--rw-r--r--   1 root root       981 Mar 26 17:33 ./source/ap/vim/patches/7.3.145.gz
--rw-r--r--   1 root root      2415 Mar 27 14:04 ./source/ap/vim/patches/7.3.146.gz
--rw-r--r--   1 root root       814 Apr  1 11:07 ./source/ap/vim/patches/7.3.147.gz
--rw-r--r--   1 root root      2468 Apr  1 12:46 ./source/ap/vim/patches/7.3.148.gz
--rw-r--r--   1 root root      1002 Apr  1 13:35 ./source/ap/vim/patches/7.3.149.gz
--rw-r--r--   1 root root      1201 Apr  1 14:08 ./source/ap/vim/patches/7.3.150.gz
--rw-r--r--   1 root root       937 Apr  1 14:30 ./source/ap/vim/patches/7.3.151.gz
--rw-r--r--   1 root root      3970 Apr  1 17:16 ./source/ap/vim/patches/7.3.152.gz
--rw-r--r--   1 root root       905 Apr  2 12:46 ./source/ap/vim/patches/7.3.153.gz
--rw-r--r--   1 root root      1394 Apr  2 13:14 ./source/ap/vim/patches/7.3.154.gz
--rw-r--r--   1 root root       839 Jul 21  2006 ./source/ap/vim/slack-desc.vim
--rw-r--r--   1 root root       964 Jul 21  2006 ./source/ap/vim/slack-desc.vim-gvim
--rw-r--r--   1 root root   6922196 Aug 15  2010 ./source/ap/vim/vim-7.3.tar.xz
--rwxr-xr-x   1 root root      6533 Aug 28  2010 ./source/ap/vim/vim-gvim.SlackBuild
--rw-r--r--   1 root root     34845 Mar 28 19:08 ./source/ap/vim/vim-runtime-syntax-20110328.diff.gz
--rwxr-xr-x   1 root root      6828 Aug 28  2010 ./source/ap/vim/vim.SlackBuild
--rw-r--r--   1 root root       303 May 28  2009 ./source/ap/vim/vim.vimrc.diff.gz
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/vorbis-tools
--rw-r--r--   1 root root      1071 Dec 19  2003 ./source/ap/vorbis-tools/slack-desc
--rw-r--r--   1 root root    677868 Mar 26  2010 ./source/ap/vorbis-tools/vorbis-tools-1.4.0.tar.xz
--rwxr-xr-x   1 root root      2702 Jul 28  2010 ./source/ap/vorbis-tools/vorbis-tools.SlackBuild
-drwxr-xr-x   2 root root      4096 Jul 28  2010 ./source/ap/workbone
--rw-r--r--   1 root root       689 Mar 23  2002 ./source/ap/workbone/slack-desc
--rw-r--r--   1 root root       262 Feb 14  2003 ./source/ap/workbone/workbone.1.diff.gz
--rwxr-xr-x   1 root root      2551 Jul 28  2010 ./source/ap/workbone/workbone.SlackBuild
--rw-r--r--   1 root root      4997 Jun  5  2008 ./source/ap/workbone/workbone_2.40-9.diff.gz
--rw-r--r--   1 root root     21877 Oct 15  1998 ./source/ap/workbone/workbone_2.40.orig.tar.gz
-drwxr-xr-x   2 root root      4096 Feb  9  2010 ./source/ap/xfsdump
--rw-r--r--   1 root root       983 Feb 22  2006 ./source/ap/xfsdump/slack-desc
--rw-r--r--   1 root root    560656 Jan 13  2010 ./source/ap/xfsdump/xfsdump-3.0.4.tar.xz
--rwxr-xr-x   1 root root      3906 Feb  9  2010 ./source/ap/xfsdump/xfsdump.SlackBuild
--rw-r--r--   1 root root       473 Feb  9  2010 ./source/ap/xfsdump/xfsdump.destdir.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 19 23:48 ./source/ap/zsh
--rw-r--r--   1 root root       140 Apr 10  2007 ./source/ap/zsh/doinst.sh.gz
--rw-r--r--   1 root root       962 Feb 14  2002 ./source/ap/zsh/slack-desc
--rw-r--r--   1 root root   2516540 Dec 20 15:10 ./source/ap/zsh/zsh-4.3.11-doc.tar.xz
--rw-r--r--   1 root root   2419260 Dec 20 16:06 ./source/ap/zsh/zsh-4.3.11.tar.xz
--rwxr-xr-x   1 root root      4074 Mar 19 23:48 ./source/ap/zsh/zsh.SlackBuild
--rw-r--r--   1 root root       262 Mar 19 23:50 ./source/ap/zsh/zsh.regex.oh.bah.diff.gz
-drwxr-xr-x  41 root root      4096 Mar 29 05:28 ./source/d
-drwxr-xr-x   2 root root      4096 Nov  6 17:42 ./source/d/autoconf
--rw-r--r--   1 root root   1167804 Sep 22  2010 ./source/d/autoconf/autoconf-2.68.tar.xz
--rw-r--r--   1 root root       556 Sep 22  2010 ./source/d/autoconf/autoconf-2.68.tar.xz.sig
--rwxr-xr-x   1 root root      2929 Nov  6 17:44 ./source/d/autoconf/autoconf.SlackBuild
--rw-r--r--   1 root root       339 May 30  2001 ./source/d/autoconf/doinst.sh.gz
--rw-r--r--   1 root root      1090 Mar 23  2002 ./source/d/autoconf/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 12  2010 ./source/d/automake
--rw-r--r--   1 root root    934172 Dec  8  2009 ./source/d/automake/automake-1.11.1.tar.xz
--rwxr-xr-x   1 root root      3016 Dec 15 01:05 ./source/d/automake/automake.SlackBuild
--rw-r--r--   1 root root       348 May 30  2001 ./source/d/automake/doinst.sh.gz
--rw-r--r--   1 root root      1086 Mar 23  2002 ./source/d/automake/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 22 04:39 ./source/d/binutils
--rw-r--r--   1 root root       249 Jan 19 00:26 ./source/d/binutils/binutils-2.21.51.0.6.tar.sign
--rw-r--r--   1 root root  12320416 Jan 19 00:26 ./source/d/binutils/binutils-2.21.51.0.6.tar.xz
--rwxr-xr-x   1 root root      5799 Jan  6 19:24 ./source/d/binutils/binutils.SlackBuild
--rw-r--r--   1 root root      8418 Jan 19 01:46 ./source/d/binutils/release.binutils-2.21.51.0.6
--rw-r--r--   1 root root       902 Mar 22  2002 ./source/d/binutils/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 14  2010 ./source/d/bison
--rw-r--r--   1 root root   1652612 Aug  6  2010 ./source/d/bison/bison-2.4.3.tar.bz2
--rwxr-xr-x   1 root root      3327 Dec  4 18:28 ./source/d/bison/bison.SlackBuild
--rw-r--r--   1 root root       927 Mar 23  2002 ./source/d/bison/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 11 20:14 ./source/d/ccache
--rw-r--r--   1 root root    233936 Jan  9 19:59 ./source/d/ccache/ccache-3.1.4.tar.xz
--rw-r--r--   1 root root       198 Jan  9 19:59 ./source/d/ccache/ccache-3.1.4.tar.xz.asc
--rwxr-xr-x   1 root root      2889 Jan 11 20:15 ./source/d/ccache/ccache.SlackBuild
--rw-r--r--   1 root root       771 Mar 18  2003 ./source/d/ccache/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 20  2010 ./source/d/clisp
--rw-r--r--   1 root root   8091011 Jul  7  2010 ./source/d/clisp/clisp-2.49.tar.bz2
--rw-r--r--   1 root root        65 Jul  7  2010 ./source/d/clisp/clisp-2.49.tar.bz2.sig
--rwxr-xr-x   1 root root      5799 Jul 20  2010 ./source/d/clisp/clisp.SlackBuild
--rw-r--r--   1 root root    898945 Sep 11  2008 ./source/d/clisp/ffcall-20080704cvs.tar.bz2
--rw-r--r--   1 root root    264500 Dec 11  2009 ./source/d/clisp/libsigsegv-2.8.tar.xz
--rw-r--r--   1 root root      1121 Jul 17  2003 ./source/d/clisp/slack-desc
--rwxr-xr-x   1 root root       242 Sep 11  2008 ./source/d/clisp/source.download
-drwxr-xr-x   2 root root      4096 Mar 17 23:01 ./source/d/cmake
--rw-r--r--   1 root root   3725240 Feb 15 20:54 ./source/d/cmake/cmake-2.8.4.tar.xz
--rwxr-xr-x   1 root root      3635 Jan  2 22:51 ./source/d/cmake/cmake.SlackBuild
--rw-r--r--   1 root root       852 Apr  9  2008 ./source/d/cmake/slack-desc
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/d/cscope
--rw-r--r--   1 root root    361214 Apr 30  2009 ./source/d/cscope/cscope-15.7a.tar.bz2
--rwxr-xr-x   1 root root      2952 May  3  2010 ./source/d/cscope/cscope.SlackBuild
--rw-r--r--   1 root root       805 Aug 20  2003 ./source/d/cscope/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/cvs
--rw-r--r--   1 root root   2942652 May  8  2008 ./source/d/cvs/cvs-1.11.23.tar.bz2
--rw-r--r--   1 root root        65 May  8  2008 ./source/d/cvs/cvs-1.11.23.tar.bz2.sig
--rwxr-xr-x   1 root root      3149 Jul 29  2010 ./source/d/cvs/cvs.SlackBuild
--rw-r--r--   1 root root       992 Feb 23  2002 ./source/d/cvs/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/d/dev86
--rw-r--r--   1 root root    703028 Oct 16  2007 ./source/d/dev86/Dev86src-0.16.17.tar.gz
--rw-r--r--   1 root root       408 Mar 28  2008 ./source/d/dev86/README
--rw-r--r--   1 root root       361 Sep 23  2008 ./source/d/dev86/dev86-x86_64.noelks.patch.gz
--rw-r--r--   1 root root       342 Sep 22  2008 ./source/d/dev86/dev86-x86_64.patch.gz
--rwxr-xr-x   1 root root      3662 Jul 29  2010 ./source/d/dev86/dev86.SlackBuild
--rw-r--r--   1 root root       312 Mar 29  2008 ./source/d/dev86/dev86.info
--rw-r--r--   1 root root       490 Sep 18  2008 ./source/d/dev86/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/distcc
--rw-r--r--   1 root root    341601 Dec 22  2004 ./source/d/distcc/distcc-2.18.3.tar.bz2
--rw-r--r--   1 root root       189 Dec 22  2004 ./source/d/distcc/distcc-2.18.3.tar.bz2.asc
--rwxr-xr-x   1 root root      2921 Jul 29  2010 ./source/d/distcc/distcc.SlackBuild
--rw-r--r--   1 root root       940 Feb 19  2003 ./source/d/distcc/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 11 20:19 ./source/d/doxygen
--rw-r--r--   1 root root   2976276 Jan  3 16:03 ./source/d/doxygen/doxygen-1.7.3.src.tar.xz
--rwxr-xr-x   1 root root      3549 Nov  6 18:22 ./source/d/doxygen/doxygen.SlackBuild
--rw-r--r--   1 root root       969 Feb 11  2008 ./source/d/doxygen/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/flex
--rw-r--r--   1 root root   1256501 Feb 26  2008 ./source/d/flex/flex-2.5.35.tar.bz2
--rwxr-xr-x   1 root root      3607 Jul 29  2010 ./source/d/flex/flex.SlackBuild
--rw-r--r--   1 root root       786 Sep 20  2006 ./source/d/flex/slack-desc
-drwxr-xr-x   3 root root      4096 Jan  4 04:41 ./source/d/gcc
--rw-r--r--   1 root root   1470676 Jan  6  2010 ./source/d/gcc/ecj-4.5.jar
--rw-rw-r--   1 root root    482116 Jan 16  2009 ./source/d/gcc/fastjar-0.97.tar.xz
-drwxr-xr-x   2 root root      4096 Oct  4  2010 ./source/d/gcc/fastjar-patches
--rw-r--r--   1 root root       554 Jan 16  2009 ./source/d/gcc/fastjar-patches/1000-fastjar-0.97-segfault.patch.gz
--rw-r--r--   1 root root       345 Dec 22  2009 ./source/d/gcc/fastjar-patches/1001-fastjar-0.97-len1.patch.gz
--rw-r--r--   1 root root       358 Jun 11  2010 ./source/d/gcc/fastjar-patches/1002-fastjar-0.97-filename0.patch.gz
--rw-r--r--   1 root root      1211 Jun 11  2010 ./source/d/gcc/fastjar-patches/1003-fastjar-CVE-2010-0831.patch.gz
--rw-r--r--   1 root root       514 Jun 24  2010 ./source/d/gcc/fastjar-patches/1004-fastjar-man.patch.gz
--rw-r--r--   1 root root  51230644 Dec 16 14:50 ./source/d/gcc/gcc-4.5.2.tar.xz
--rw-r--r--   1 root root       527 Aug  1  2010 ./source/d/gcc/gcc-no_fixincludes.diff.gz
--rwxr-xr-x   1 root root     25005 Feb  8 02:15 ./source/d/gcc/gcc.SlackBuild
--rw-r--r--   1 root root       756 Feb 21  2002 ./source/d/gcc/slack-desc.gcc
--rw-r--r--   1 root root       753 Feb 21  2002 ./source/d/gcc/slack-desc.gcc-g++
--rw-r--r--   1 root root      1231 Nov  8  2007 ./source/d/gcc/slack-desc.gcc-gfortran
--rw-r--r--   1 root root       843 Jul 30  2006 ./source/d/gcc/slack-desc.gcc-gnat
--rw-r--r--   1 root root       817 Jul 30  2006 ./source/d/gcc/slack-desc.gcc-java
--rw-r--r--   1 root root       962 Jul 30  2006 ./source/d/gcc/slack-desc.gcc-objc
-drwxr-xr-x   2 root root      4096 Nov 27 22:20 ./source/d/gdb
--rw-r--r--   1 root root  13982712 Sep  3  2010 ./source/d/gdb/gdb-7.2.tar.xz
--rwxr-xr-x   1 root root      3810 Apr  7 23:37 ./source/d/gdb/gdb.SlackBuild
--rw-r--r--   1 root root      1211 Feb 11  2008 ./source/d/gdb/slack-desc
-lrwxrwxrwx   1 root root        12 Jul 29  2010 ./source/d/gettext-tools -> ../a/gettext
-drwxr-xr-x   2 root root      4096 Apr 14 17:52 ./source/d/git
--rw-r--r--   1 root root       249 Apr  6 19:16 ./source/d/git/git-1.7.4.4.tar.sign
--rw-r--r--   1 root root   2431840 Apr  6 19:16 ./source/d/git/git-1.7.4.4.tar.xz
--rwxr-xr-x   1 root root      4792 Feb 16 04:07 ./source/d/git/git.SlackBuild
--rw-r--r--   1 root root       851 May 30  2009 ./source/d/git/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 29  2010 ./source/d/gperf
--rw-r--r--   1 root root    676172 Feb  3  2009 ./source/d/gperf/gperf-3.0.4.tar.xz
--rwxr-xr-x   1 root root      3432 Jul 29  2010 ./source/d/gperf/gperf.SlackBuild
--rw-r--r--   1 root root      1018 Feb 14  2007 ./source/d/gperf/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 11 19:06 ./source/d/guile
--rw-r--r--   1 root root   2320720 Dec 13 20:36 ./source/d/guile/guile-1.8.8.tar.xz
--rwxr-xr-x   1 root root      3456 Jan 11 19:08 ./source/d/guile/guile.SlackBuild
--rw-r--r--   1 root root       894 Feb 11  2008 ./source/d/guile/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/indent
--rw-r--r--   1 root root    531879 Mar  4  2009 ./source/d/indent/indent-2.2.10.tar.bz2
--rwxr-xr-x   1 root root      3581 Jul 29  2010 ./source/d/indent/indent.SlackBuild
--rw-r--r--   1 root root       889 Mar  4  2009 ./source/d/indent/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 11 19:15 ./source/d/intltool
--rw-r--r--   1 root root    106831 Mar 24  2010 ./source/d/intltool/intltool-0.41.1.tar.bz2
--rwxr-xr-x   1 root root      3802 Apr 30  2010 ./source/d/intltool/intltool.SlackBuild
--rw-r--r--   1 root root       692 Sep 18  2008 ./source/d/intltool/slack-desc
-drwxr-xr-x   2 root root      4096 May 29  2009 ./source/d/kernel-headers
--rw-r--r--   1 root root       797 Sep  4  2003 ./source/d/kernel-headers/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  6 18:39 ./source/d/libtool
--rw-r--r--   1 root root       385 May 30  2009 ./source/d/libtool/doinst.sh.gz
--rw-r--r--   1 root root    852248 Sep 22  2010 ./source/d/libtool/libtool-2.4.tar.xz
--rw-r--r--   1 root root        72 Sep 22  2010 ./source/d/libtool/libtool-2.4.tar.xz.sig
--rwxr-xr-x   1 root root      3162 Nov  6 18:40 ./source/d/libtool/libtool.SlackBuild
--rw-r--r--   1 root root       506 Nov  6 18:38 ./source/d/libtool/libtool.no.moved.warning.diff.gz
--rw-r--r--   1 root root       958 May 30  2009 ./source/d/libtool/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  2 23:25 ./source/d/m4
--rw-r--r--   1 root root   1005264 Mar  1 19:45 ./source/d/m4/m4-1.4.16.tar.xz
--rw-r--r--   1 root root       556 Mar  1 19:45 ./source/d/m4/m4-1.4.16.tar.xz.sig
--rwxr-xr-x   1 root root      3981 Mar  2 23:26 ./source/d/m4/m4.SlackBuild
--rw-r--r--   1 root root       928 Oct 15  2008 ./source/d/m4/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 29  2010 ./source/d/make
--rw-r--r--   1 root root   1242186 Jul 28  2010 ./source/d/make/make-3.82.tar.bz2
--rw-r--r--   1 root root        72 Jul 28  2010 ./source/d/make/make-3.82.tar.bz2.sig
--rwxr-xr-x   1 root root      3320 Aug 30  2010 ./source/d/make/make.SlackBuild
--rw-r--r--   1 root root       923 Mar 23  2002 ./source/d/make/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  4 03:00 ./source/d/mercurial
--rw-r--r--   1 root root       279 May 18  2010 ./source/d/mercurial/doinst.sh.gz
--rw-r--r--   1 root root   1330072 Apr  1 17:46 ./source/d/mercurial/mercurial-1.8.2.tar.xz
--rwxr-xr-x   1 root root      3734 May 18  2010 ./source/d/mercurial/mercurial.SlackBuild
--rw-r--r--   1 root root      1253 May 14  2006 ./source/d/mercurial/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 11 19:17 ./source/d/nasm
--rw-r--r--   1 root root    801640 Nov 22 19:29 ./source/d/nasm/nasm-2.09.04.tar.bz2
--rwxr-xr-x   1 root root      2797 Jan 11 19:18 ./source/d/nasm/nasm.SlackBuild
--rw-r--r--   1 root root       765 May 28  2002 ./source/d/nasm/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12  2010 ./source/d/oprofile
--rw-r--r--   1 root root    788892 Nov 24  2009 ./source/d/oprofile/oprofile-0.9.6.tar.xz
--rwxr-xr-x   1 root root      4153 Jan 22 04:50 ./source/d/oprofile/oprofile.SlackBuild
--rw-r--r--   1 root root     14520 Jun 29  2009 ./source/d/oprofile/oprofile.qt4.diff.gz
--rw-r--r--   1 root root       965 Sep  8  2003 ./source/d/oprofile/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/p2c
--rw-r--r--   1 root root       409 Jun  2  2007 ./source/d/p2c/_p2c.tar.gz
--rw-r--r--   1 root root    423399 Jul  4  1996 ./source/d/p2c/p2c-1.21alpha2.tar.gz
--rwxr-xr-x   1 root root      4424 Jul 29  2010 ./source/d/p2c/p2c.SlackBuild
--rw-r--r--   1 root root       268 Jun  2  2007 ./source/d/p2c/p2c.examples.diff.gz
--rw-r--r--   1 root root      4450 May  5  2005 ./source/d/p2c/p2c_1.21alpha2-2.1.diff.gz
--rw-r--r--   1 root root       168 Oct 31  2008 ./source/d/p2c/p2c_time.diff.gz
--rw-r--r--   1 root root      1000 Mar 23  2002 ./source/d/p2c/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 26 03:25 ./source/d/perl
--rw-r--r--   1 root root    133427 Oct 26 16:59 ./source/d/perl/DBD-mysql-4.018.tar.gz
--rw-r--r--   1 root root    576803 Dec 30 10:26 ./source/d/perl/DBI-1.616.tar.gz
--rw-r--r--   1 root root     80723 Jan 22 23:34 ./source/d/perl/URI-1.58.tar.gz
--rw-r--r--   1 root root    237891 Sep 15  2010 ./source/d/perl/XML-Parser-2.40.tar.gz
--rw-r--r--   1 root root     71129 Aug 15  2007 ./source/d/perl/XML-Simple-2.18.tar.gz
--rw-r--r--   1 root root   9292208 Jan 22 02:40 ./source/d/perl/perl-5.12.3.tar.xz
--rwxr-xr-x   1 root root      8929 Jan 26 18:38 ./source/d/perl/perl.SlackBuild
--rw-r--r--   1 root root       606 Sep 21  2008 ./source/d/perl/perl.configure.multilib.patch.gz
--rw-r--r--   1 root root       971 Jul 23  2002 ./source/d/perl/slack-desc
-drwxr-xr-x   3 root root      4096 Jul 29  2010 ./source/d/pkg-config
--rw-r--r--   1 root root       143 Apr  9  2008 ./source/d/pkg-config/doinst.sh.gz
--rw-r--r--   1 root root    492420 May 28  2010 ./source/d/pkg-config/pkg-config-0.25.tar.xz
--rwxr-xr-x   1 root root      3534 Jul 29  2010 ./source/d/pkg-config/pkg-config.SlackBuild
-drwxr-xr-x   2 root root      4096 Aug 20  2006 ./source/d/pkg-config/scripts
--rwxr-xr-x   1 root root       194 May 24  2007 ./source/d/pkg-config/scripts/pkgconfig.csh
--rwxr-xr-x   1 root root       204 May 24  2007 ./source/d/pkg-config/scripts/pkgconfig.sh
--rw-r--r--   1 root root       907 Feb 11  2008 ./source/d/pkg-config/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/pmake
--rw-r--r--   1 root root    264383 Jul  7  2005 ./source/d/pmake/pmake-1.111.tar.gz
--rwxr-xr-x   1 root root      4221 Mar 29 04:17 ./source/d/pmake/pmake.SlackBuild
--rw-r--r--   1 root root       265 Mar 24  2007 ./source/d/pmake/pmake.strerror.strdup.diff.gz
--rw-r--r--   1 root root     38071 Feb  9  2007 ./source/d/pmake/pmake.txt.gz
--rw-r--r--   1 root root     26675 Jul  7  2005 ./source/d/pmake/pmake_1.111-1.diff.gz
--rw-r--r--   1 root root       795 Feb  9  2007 ./source/d/pmake/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 27 23:26 ./source/d/python
--rw-r--r--   1 root root   8949356 Aug 24  2010 ./source/d/python/Python-2.6.6.tar.xz
--rw-r--r--   1 root root   1324848 Aug 24  2010 ./source/d/python/python-2.6.6-docs-text.tar.xz
--rwxr-xr-x   1 root root      4674 Nov 27 23:26 ./source/d/python/python.SlackBuild
--rw-r--r--   1 root root       422 Nov 27 23:26 ./source/d/python/python.pure64.diff.gz
--rw-r--r--   1 root root       327 Nov 27 23:08 ./source/d/python/python.readline.set_pre_input_hook.diff.gz
--rw-r--r--   1 root root      2071 Nov 27 23:23 ./source/d/python/python.x86_64.diff.gz
--rw-r--r--   1 root root       895 Mar 23  2002 ./source/d/python/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/d/rcs
--rw-r--r--   1 root root     10982 Jun 27  2007 ./source/d/rcs/_rcs.tar.gz
--rw-r--r--   1 root root       270 Aug 12  1995 ./source/d/rcs/rcs-5.7.diff.gz
--rw-r--r--   1 root root    282413 Jun 16  1995 ./source/d/rcs/rcs-5.7.tar.gz
--rwxr-xr-x   1 root root      3037 Jan 25  2010 ./source/d/rcs/rcs.SlackBuild
--rw-r--r--   1 root root       776 Mar 23  2002 ./source/d/rcs/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  6 21:25 ./source/d/ruby
--rw-r--r--   1 root root   5561312 Feb 18 13:08 ./source/d/ruby/ruby-1.9.1-p431.tar.xz
--rwxr-xr-x   1 root root      4717 Mar  6 21:26 ./source/d/ruby/ruby.SlackBuild
--rw-r--r--   1 root root       865 Jul 20  2006 ./source/d/ruby/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  8 21:30 ./source/d/slacktrack
--rw-r--r--   1 root root     27340 May 15  2009 ./source/d/slacktrack/OVERVIEW
--rw-r--r--   1 root root     85852 Nov  9 16:03 ./source/d/slacktrack/slacktrack-2.08-source.tar.xz
--rwxr-xr-x   1 root root       332 Nov  9 16:04 ./source/d/slacktrack/slacktrack.SlackBuild
-drwxr-xr-x   2 root root      4096 Jul 29  2010 ./source/d/strace
--rw-r--r--   1 root root      1007 Apr  6  2002 ./source/d/strace/slack-desc
--rw-r--r--   1 root root    504078 Jul 29  2010 ./source/d/strace/strace-4.5.20.tar.bz2
--rwxr-xr-x   1 root root      2759 Jul 29  2010 ./source/d/strace/strace.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar  9 20:39 ./source/d/subversion
--rwxr-xr-x   1 root root       185 May 30  2009 ./source/d/subversion/get-svn-book.sh
--rw-r--r--   1 root root      1058 Apr 30  2010 ./source/d/subversion/slack-desc
--rw-r--r--   1 root root   4426856 Mar  3 19:46 ./source/d/subversion/subversion-1.6.16.tar.xz
--rwxr-xr-x   1 root root      5458 Mar  9 20:59 ./source/d/subversion/subversion.SlackBuild
--rw-r--r--   1 root root    421431 Mar  9 07:03 ./source/d/subversion/svn-book-html.tar.bz2
-drwxr-xr-x   2 root root      4096 Jan 26 19:15 ./source/d/swig
--rw-r--r--   1 root root      1018 Mar  8  2009 ./source/d/swig/slack-desc
--rw-r--r--   1 root root   3888548 Jan 31  2009 ./source/d/swig/swig-1.3.38.tar.bz2
--rwxr-xr-x   1 root root      3623 Jan 26 19:15 ./source/d/swig/swig.SlackBuild
--rw-r--r--   1 root root        61 Feb 23  2009 ./source/d/swig/swig.url
-drwxr-xr-x   2 root root      4096 Aug 31  2010 ./source/d/yasm
--rw-r--r--   1 root root      1047 Jun 16  2008 ./source/d/yasm/slack-desc
--rw-r--r--   1 root root    905836 Aug  7  2010 ./source/d/yasm/yasm-1.1.0.tar.xz
--rwxr-xr--   1 root root      7478 Aug 31  2010 ./source/d/yasm/yasm.SlackBuild
-drwxr-xr-x   3 root root      4096 Mar 16  2010 ./source/e
-drwxr-xr-x   2 root root      4096 Mar 12 19:27 ./source/e/emacs
--rw-r--r--   1 root root       312 Apr  6  2008 ./source/e/emacs/doinst.sh.gz
--rw-r--r--   1 root root  29323756 Mar 10 02:45 ./source/e/emacs/emacs-23.3.tar.xz
--rwxr-xr-x   1 root root      5152 Mar 12 19:35 ./source/e/emacs/emacs.SlackBuild
--rw-r--r--   1 root root       549 Apr  6  2008 ./source/e/emacs/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 16  2009 ./source/f
--rw-r--r--   1 root root       963 Feb 25  2002 ./source/f/slack-desc.linux-faqs
--rw-r--r--   1 root root       804 Feb 25  2002 ./source/f/slack-desc.linux-howtos
-drwxr-xr-x   4 root root      4096 Mar 26 04:42 ./source/installer
--rw-r--r--   1 root root   1884368 Mar 13 01:48 ./source/installer/busybox-1.18.4.tar.xz
--rw-r--r--   1 root root     26549 Apr 12 00:18 ./source/installer/busybox-dot-config
--rw-r--r--   1 root root       275 Dec 31  2009 ./source/installer/busybox.2.6.32.2.diff.gz
--rwxr-xr-x   1 root root      2388 Mar 26 04:42 ./source/installer/busybox.SlackBuild
-drwxr-xr-x   2 root root      4096 Jan 20  2010 ./source/installer/dhcpcd
--rw-r--r--   1 root root       311 Mar  6  2009 ./source/installer/dhcpcd/config.h.diff.gz
--rw-r--r--   1 root root     45030 Aug 26  2008 ./source/installer/dhcpcd/dhcpcd-3.2.3.tar.bz2
--rw-r--r--   1 root root       391 Mar  7  2009 ./source/installer/dhcpcd/dhcpcd.sh.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 13  2008 ./source/installer/dropbear
--rw-r--r--   1 root root       372 Mar 13  2008 ./source/installer/dropbear/doinst.sh
--rw-r--r--   1 root root   1589729 Mar 13  2008 ./source/installer/dropbear/dropbear-0.50.tar.bz2
--rwxr-xr--   1 root root      4332 Mar 13  2008 ./source/installer/dropbear/dropbear.Slackbuild
--rw-r--r--   1 root root       414 Mar 13  2008 ./source/installer/dropbear/dropbear.xauth.patch
--rw-r--r--   1 root root       582 Mar 13  2008 ./source/installer/dropbear/dropbear_dbclientpath.patch
--rw-r--r--   1 root root      1887 Mar 13  2008 ./source/installer/dropbear/dropbear_emptypass.patch
--rw-r--r--   1 root root      1795 Mar 13  2008 ./source/installer/dropbear/rc.dropbear.new
--rw-r--r--   1 root root       890 Mar 13  2008 ./source/installer/dropbear/slack-desc
--rw-r--r--   1 root root    161644 Mar 23 21:16 ./source/installer/memtest86+-4.20.tar.xz
-drwxr-xr-x   6 root root      4096 Apr 12 17:43 ./source/k
--rw-r--r--   1 root root      1208 Apr  7 06:09 ./source/k/README.TXT
--rw-r--r--   1 root root      2975 Mar  2 21:58 ./source/k/README_SPEAKUP_PATCH.TXT
--rw-r--r--   1 root root    112324 Apr  9 17:54 ./source/k/config-generic-2.6.37.6
--rw-r--r--   1 root root    112298 Apr 10 03:43 ./source/k/config-huge-2.6.37.6
-drwxr-xr-x   2 root root      4096 Apr  9 18:25 ./source/k/kernel-firmware
--rwxr-xr-x   1 root root      1679 Apr  9 18:25 ./source/k/kernel-firmware/kernel-firmware.SlackBuild
--rw-r--r--   1 root root       344 Oct 16  2008 ./source/k/kernel-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  9 18:25 ./source/k/kernel-generic
--rwxr-xr-x   1 root root      2909 Apr  9 18:25 ./source/k/kernel-generic/kernel-generic.SlackBuild
--rw-r--r--   1 root root      1091 Jun 18  2009 ./source/k/kernel-generic/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 10 03:50 ./source/k/kernel-huge
--rwxr-xr-x   1 root root      2906 Apr 10 03:50 ./source/k/kernel-huge/kernel-huge.SlackBuild
--rw-r--r--   1 root root      1100 Jun 18  2009 ./source/k/kernel-huge/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  9 18:25 ./source/k/kernel-modules
--rwxr-xr-x   1 root root      2872 Apr  9 18:25 ./source/k/kernel-modules/kernel-modules.SlackBuild
--rwxr-xr-x   1 root root     35406 Jun  4  2009 ./source/k/kernel-modules/rc.modules.new
--rw-r--r--   1 root root       985 Jun 18  2009 ./source/k/kernel-modules/slack-desc
--rw-r--r--   1 root root       249 Mar 27 22:47 ./source/k/linux-2.6.37.6.tar.sign
--rw-r--r--   1 root root  61028204 Mar 27 22:47 ./source/k/linux-2.6.37.6.tar.xz
-drwxr-xr-x  40 root root      4096 Mar 13 19:53 ./source/kde
--rwxr-xr-x   1 root root      1992 Dec  2 22:44 ./source/kde/KDE.SlackBuild
--rw-r--r--   1 root root      1598 Jan  7 06:58 ./source/kde/KDE.options
--rwxr-xr-x   1 root root      1334 Mar 13 19:53 ./source/kde/KDE_extra.SlackBuild
-drwxr-xr-x   2 root root      4096 Nov  3  2009 ./source/kde/amarok
--rwxr-xr-x   1 root root      3561 Nov  3  2009 ./source/kde/amarok/amarok.SlackBuild
--rw-r--r--   1 root root       118 May 17  2008 ./source/kde/amarok/doinst.sh.gz
--rw-r--r--   1 root root        14 Jan 15 18:33 ./source/kde/amarok/local.options
--rw-r--r--   1 root root       779 May 26  2008 ./source/kde/amarok/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 16 17:32 ./source/kde/k3b
--rw-r--r--   1 root root       118 May 17  2008 ./source/kde/k3b/doinst.sh.gz
--rwxr-xr-x   1 root root      2876 Jan 16 17:32 ./source/kde/k3b/k3b.SlackBuild
--rw-r--r--   1 root root        22 Jan 26 05:17 ./source/kde/k3b/local.options
--rw-r--r--   1 root root       836 Jun 15  2004 ./source/kde/k3b/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kaudiocreator
--rw-r--r--   1 root root       118 May 17  2008 ./source/kde/kaudiocreator/doinst.sh.gz
--rwxr-xr-x   1 root root      2704 Jun  5  2010 ./source/kde/kaudiocreator/kaudiocreator.SlackBuild
--rw-r--r--   1 root root        25 Jan  7 06:27 ./source/kde/kaudiocreator/local.options
--rw-r--r--   1 root root       752 Dec 16  2009 ./source/kde/kaudiocreator/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdeaccessibility
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeaccessibility/doinst.sh.gz
--rwxr-xr-x   1 root root      2935 Jun  5  2010 ./source/kde/kdeaccessibility/kdeaccessibility.SlackBuild
--rw-r--r--   1 root root       881 May  4  2010 ./source/kde/kdeaccessibility/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 13 21:43 ./source/kde/kdeadmin
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeadmin/doinst.sh.gz
--rwxr-xr-x   1 root root      3028 Jun  5  2010 ./source/kde/kdeadmin/kdeadmin.SlackBuild
--rw-r--r--   1 root root      1254 Mar 13 21:43 ./source/kde/kdeadmin/knetworkconf.diff.gz
--rw-r--r--   1 root root         8 Mar  4 04:00 ./source/kde/kdeadmin/local.options
--rw-r--r--   1 root root       639 May  4  2010 ./source/kde/kdeadmin/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 07:05 ./source/kde/kdeartwork
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeartwork/doinst.sh.gz
--rwxr-xr-x   1 root root      2938 Jun  5  2010 ./source/kde/kdeartwork/kdeartwork.SlackBuild
--rw-r--r--   1 root root         8 Feb  9 07:05 ./source/kde/kdeartwork/local.options
--rw-r--r--   1 root root       689 May  4  2010 ./source/kde/kdeartwork/slack-desc
-drwxr-xr-x   4 root root      4096 Apr  4 20:09 ./source/kde/kdebase
-drwxr-xr-x   2 root root      4096 Feb 12 23:15 ./source/kde/kdebase-runtime
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdebase-runtime/doinst.sh.gz
--rwxr-xr-x   1 root root      3078 Jun  5  2010 ./source/kde/kdebase-runtime/kdebase-runtime.SlackBuild
--rw-r--r--   1 root root         8 Feb 12 23:15 ./source/kde/kdebase-runtime/local.options
--rw-r--r--   1 root root       757 May  4  2010 ./source/kde/kdebase-runtime/slack-desc
-drwxr-xr-x   4 root root      4096 Dec  2 01:13 ./source/kde/kdebase-workspace
-drwxr-xr-x   2 root root      4096 Aug 31  2009 ./source/kde/kdebase-workspace/config
--rw-r--r--   1 root root      2551 Dec 21  2007 ./source/kde/kdebase-workspace/config/Xsession
--rw-r--r--   1 root root      1844 Dec 21  2007 ./source/kde/kdebase-workspace/config/Xsession.orig
--rw-r--r--   1 root root       361 Dec 21  2007 ./source/kde/kdebase-workspace/doinst.sh.gz
--rwxr-xr-x   1 root root      4490 Sep  3  2010 ./source/kde/kdebase-workspace/kdebase-workspace.SlackBuild
--rw-r--r--   1 root root       247 Dec  2 01:13 ./source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff.gz
--rw-r--r--   1 root root       438 May  4  2010 ./source/kde/kdebase-workspace/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 31  2009 ./source/kde/kdebase-workspace/xinit
--rwxr-xr-x   1 root root       627 Jun 18  2010 ./source/kde/kdebase-workspace/xinit/xinitrc.kde
-drwxr-xr-x   2 root root      4096 Aug 31  2009 ./source/kde/kdebase/config
--rw-r--r--   1 root root        69 Aug 23  2006 ./source/kde/kdebase/config/kdeglobals
--rw-r--r--   1 root root       124 Jan 21  2009 ./source/kde/kdebase/doinst.sh.gz
--rwxr-xr-x   1 root root      4071 Apr  4 20:10 ./source/kde/kdebase/kdebase.SlackBuild
--rw-r--r--   1 root root      1335 Mar  4 03:47 ./source/kde/kdebase/konsole_right_click-185466.patch.gz
--rw-r--r--   1 root root       282 Apr  4 20:09 ./source/kde/kdebase/konsole_right_click-185466.patch.patch.gz
--rw-r--r--   1 root root         8 Apr  4 20:09 ./source/kde/kdebase/local.options
-drwxr-xr-x   2 root root      4096 Aug 31  2009 ./source/kde/kdebase/profile.d
--rwxr-xr-x   1 root root       274 Jul 11  2008 ./source/kde/kdebase/profile.d/kde.csh
--rwxr-xr-x   1 root root       261 Jul 11  2008 ./source/kde/kdebase/profile.d/kde.sh
--rw-r--r--   1 root root       696 May  4  2010 ./source/kde/kdebase/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 26 19:44 ./source/kde/kdebindings
--rw-r--r--   1 root root      1819 Dec 16  2009 ./source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff.gz
--rw-r--r--   1 root root      1812 Dec 16  2009 ./source/kde/kdebindings/kdebindings-ruby-env.h.diff.gz
--rw-r--r--   1 root root       307 Dec 16  2009 ./source/kde/kdebindings/kdebindings-rubyconfig.h.diff.gz
--rw-r--r--   1 root root       658 Dec  2 18:23 ./source/kde/kdebindings/kdebindings.1170602.sip_4_11_x.diff.gz
--rwxr-xr-x   1 root root      3871 Dec 29 01:44 ./source/kde/kdebindings/kdebindings.SlackBuild
--rw-r--r--   1 root root         8 Jan 26 19:44 ./source/kde/kdebindings/local.options
--rw-r--r--   1 root root       370 Dec 29 01:38 ./source/kde/kdebindings/pykdeuic4.patch.gz
--rw-r--r--   1 root root       975 May  4  2010 ./source/kde/kdebindings/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdeedu
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeedu/doinst.sh.gz
--rwxr-xr-x   1 root root      2880 Jun  5  2010 ./source/kde/kdeedu/kdeedu.SlackBuild
--rw-r--r--   1 root root       638 May  4  2010 ./source/kde/kdeedu/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdegames
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdegames/doinst.sh.gz
--rwxr-xr-x   1 root root      2894 Jun  5  2010 ./source/kde/kdegames/kdegames.SlackBuild
--rw-r--r--   1 root root       646 May  4  2010 ./source/kde/kdegames/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 07:03 ./source/kde/kdegraphics
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdegraphics/doinst.sh.gz
--rwxr-xr-x   1 root root      2942 Aug 28  2010 ./source/kde/kdegraphics/kdegraphics.SlackBuild
--rw-r--r--   1 root root         8 Mar 22 22:04 ./source/kde/kdegraphics/local.options
--rw-r--r--   1 root root       807 Dec 16  2009 ./source/kde/kdegraphics/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 28 20:36 ./source/kde/kdelibs
--rw-r--r--   1 root root       142 Dec 20  2007 ./source/kde/kdelibs/doinst.sh.gz
--rwxr-xr-x   1 root root      3293 Mar 28 20:36 ./source/kde/kdelibs/kdelibs.SlackBuild
--rw-r--r--   1 root root       361 Jun  7  2010 ./source/kde/kdelibs/kdelibs.docbook.patch.gz
--rw-r--r--   1 root root       404 Mar 28 20:34 ./source/kde/kdelibs/kdelibs.khtml.CVE-2011-1168.diff.gz
--rw-r--r--   1 root root       766 Oct 19  2009 ./source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch.gz
--rw-r--r--   1 root root         8 Mar 28 20:36 ./source/kde/kdelibs/local.options
--rw-r--r--   1 root root       649 Dec 16  2009 ./source/kde/kdelibs/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdemultimedia
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdemultimedia/doinst.sh.gz
--rwxr-xr-x   1 root root      2937 Jun  5  2010 ./source/kde/kdemultimedia/kdemultimedia.SlackBuild
--rw-r--r--   1 root root       977 May  4  2010 ./source/kde/kdemultimedia/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  2 01:10 ./source/kde/kdenetwork
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdenetwork/doinst.sh.gz
--rwxr-xr-x   1 root root      2929 Jun  5  2010 ./source/kde/kdenetwork/kdenetwork.SlackBuild
--rw-r--r--   1 root root       692 May  4  2010 ./source/kde/kdenetwork/slack-desc
-drwxr-xr-x   2 root root      4096 Sep  3  2010 ./source/kde/kdepim
-drwxr-xr-x   2 root root      4096 Sep  3  2010 ./source/kde/kdepim-runtime
--rw-r--r--   1 root root       118 Aug 31  2009 ./source/kde/kdepim-runtime/doinst.sh.gz
--rwxr-xr-x   1 root root      2914 Jun  5  2010 ./source/kde/kdepim-runtime/kdepim-runtime.SlackBuild
--rw-r--r--   1 root root        15 Feb  2 19:02 ./source/kde/kdepim-runtime/local.options
--rw-r--r--   1 root root       972 May  4  2010 ./source/kde/kdepim-runtime/slack-desc
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdepim/doinst.sh.gz
--rw-r--r--   1 root root      3880 May  4  2010 ./source/kde/kdepim/kdepim-4.4.0-install-headers.patch
--rwxr-xr-x   1 root root      3048 Jun  5  2010 ./source/kde/kdepim/kdepim.SlackBuild
--rw-r--r--   1 root root        15 Feb  2 19:02 ./source/kde/kdepim/local.options
--rw-r--r--   1 root root       873 May  4  2010 ./source/kde/kdepim/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 21 20:30 ./source/kde/kdepimlibs
--rw-r--r--   1 root root       306 Jan 21 19:50 ./source/kde/kdepimlibs/kdepimlibs-4.5.imap4.cpp.r1216162.diff.gz
--rwxr-xr-x   1 root root      2989 Jan 21 20:30 ./source/kde/kdepimlibs/kdepimlibs.SlackBuild
--rw-r--r--   1 root root         8 Jan 21 20:30 ./source/kde/kdepimlibs/local.options
--rw-r--r--   1 root root       735 May  4  2010 ./source/kde/kdepimlibs/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdeplasma-addons
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeplasma-addons/doinst.sh.gz
--rwxr-xr-x   1 root root      2935 Jun  5  2010 ./source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild
--rw-r--r--   1 root root       763 Dec 16  2009 ./source/kde/kdeplasma-addons/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdesdk
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdesdk/doinst.sh.gz
--rwxr-xr-x   1 root root      2872 Jun  5  2010 ./source/kde/kdesdk/kdesdk.SlackBuild
--rw-r--r--   1 root root       778 May  4  2010 ./source/kde/kdesdk/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdetoys
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdetoys/doinst.sh.gz
--rwxr-xr-x   1 root root      2887 Jun  5  2010 ./source/kde/kdetoys/kdetoys.SlackBuild
--rw-r--r--   1 root root       715 May  4  2010 ./source/kde/kdetoys/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdeutils
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdeutils/doinst.sh.gz
--rwxr-xr-x   1 root root      2903 Jun  5  2010 ./source/kde/kdeutils/kdeutils.SlackBuild
--rw-r--r--   1 root root       786 May  4  2010 ./source/kde/kdeutils/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdevelop
--rw-r--r--   1 root root       118 Dec 24  2007 ./source/kde/kdevelop/doinst.sh.gz
--rwxr-xr-x   1 root root      2905 Jun  5  2010 ./source/kde/kdevelop/kdevelop.SlackBuild
--rw-r--r--   1 root root        14 Apr  5 23:30 ./source/kde/kdevelop/local.options
--rw-r--r--   1 root root       679 Dec 16  2009 ./source/kde/kdevelop/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdevplatform
--rw-r--r--   1 root root       118 Dec 24  2007 ./source/kde/kdevplatform/doinst.sh.gz
--rwxr-xr-x   1 root root      2915 Jun  5  2010 ./source/kde/kdevplatform/kdevplatform.SlackBuild
--rw-r--r--   1 root root        14 Apr  5 23:30 ./source/kde/kdevplatform/local.options
--rw-r--r--   1 root root       710 Jan 13  2009 ./source/kde/kdevplatform/slack-desc
-drwxr-xr-x   3 root root      4096 Jun  5  2010 ./source/kde/kdewebdev
--rw-r--r--   1 root root       118 Dec 21  2007 ./source/kde/kdewebdev/doinst.sh.gz
--rw-r--r--   1 root root       260 Sep  3  2009 ./source/kde/kdewebdev/include-tidy.patch.gz
--rw-r--r--   1 root root       391 Dec 29  2008 ./source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff.gz
--rwxr-xr-x   1 root root      3391 Jun  5  2010 ./source/kde/kdewebdev/kdewebdev.SlackBuild
--rw-r--r--   1 root root       716 May  4  2010 ./source/kde/kdewebdev/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kdewebdev/tidy
--rwxr-xr-x   1 root root      1682 May  7  2009 ./source/kde/kdewebdev/tidy/get-tidy-cvs.sh
--rw-r--r--   1 root root    338924 May  4  2010 ./source/kde/kdewebdev/tidy/tidy-20100503T2309.tar.xz
--rwxr-xr-x   1 root root      3271 Jun  5  2010 ./source/kde/kdewebdev/tidy/tidy.SlackBuild
--rwxr-xr-x   1 root root      2907 May  4  2010 ./source/kde/kdewebdev/tidy/tidy.build
-drwxr-xr-x   2 root root      4096 Dec 31 17:40 ./source/kde/koffice
--rw-r--r--   1 root root       118 Dec 24  2007 ./source/kde/koffice/doinst.sh.gz
--rwxr-xr-x   1 root root      3716 Mar 23 03:06 ./source/kde/koffice/koffice.SlackBuild
--rw-r--r--   1 root root        22 Mar 22 22:04 ./source/kde/koffice/local.options
--rw-r--r--   1 root root       951 Dec 24  2007 ./source/kde/koffice/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  3 08:38 ./source/kde/konq-plugins
--rw-r--r--   1 root root       318 Oct 26 15:08 ./source/kde/konq-plugins/konq-plugins-4.4.0-qt47.patch.gz
--rwxr-xr-x   1 root root      2977 Dec  3 08:39 ./source/kde/konq-plugins/konq-plugins.SlackBuild
--rw-r--r--   1 root root        22 Dec  3 08:39 ./source/kde/konq-plugins/local.options
--rw-r--r--   1 root root       982 Nov 24  2008 ./source/kde/konq-plugins/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/kopete-cryptography
--rw-r--r--   1 root root       118 Aug 31  2009 ./source/kde/kopete-cryptography/doinst.sh.gz
--rwxr-xr-x   1 root root      2900 Jun  5  2010 ./source/kde/kopete-cryptography/kopete-cryptography.SlackBuild
--rw-r--r--   1 root root        23 Apr 30  2010 ./source/kde/kopete-cryptography/local.options
--rw-r--r--   1 root root       810 Oct 21  2009 ./source/kde/kopete-cryptography/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/ktorrent
--rw-r--r--   1 root root       118 May 17  2008 ./source/kde/ktorrent/doinst.sh.gz
--rwxr-xr-x   1 root root      2898 Jun  5  2010 ./source/kde/ktorrent/ktorrent.SlackBuild
--rw-r--r--   1 root root        14 Jan  7 06:29 ./source/kde/ktorrent/local.options
--rw-r--r--   1 root root      1041 Dec 16  2009 ./source/kde/ktorrent/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 17  2010 ./source/kde/libktorrent
--rwxr-xr-x   1 root root      2888 Jan  7 19:33 ./source/kde/libktorrent/libktorrent.SlackBuild
--rw-r--r--   1 root root        16 Jan  7 06:28 ./source/kde/libktorrent/local.options
--rw-r--r--   1 root root       938 Jul 17  2010 ./source/kde/libktorrent/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/oxygen-icons
--rwxr-xr-x   1 root root      2796 Jun  5  2010 ./source/kde/oxygen-icons/oxygen-icons.SlackBuild
--rw-r--r--   1 root root       792 May  4  2010 ./source/kde/oxygen-icons/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 30 23:48 ./source/kde/polkit-kde-1
--rw-r--r--   1 root root        25 Mar 30 23:49 ./source/kde/polkit-kde-1/local.options
--rwxr-xr-x   1 root root      2979 Mar 30 23:49 ./source/kde/polkit-kde-1/polkit-kde-1.SlackBuild
--rw-r--r--   1 root root       351 Mar 30 23:52 ./source/kde/polkit-kde-1/polkit-kde-1.nodrkonqi.diff.gz
--rw-r--r--   1 root root       686 May  5  2010 ./source/kde/polkit-kde-1/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  2 21:28 ./source/kde/polkit-kde-agent-1
--rw-r--r--   1 root root        20 Dec  2 21:29 ./source/kde/polkit-kde-agent-1/local.options
--rwxr-xr-x   1 root root      2947 Dec  2 21:29 ./source/kde/polkit-kde-agent-1/polkit-kde-agent-1.SlackBuild
--rw-r--r--   1 root root       314 Dec  2 21:27 ./source/kde/polkit-kde-agent-1/pull-polkit-kde-agent-1
--rw-r--r--   1 root root       759 Dec  2 21:30 ./source/kde/polkit-kde-agent-1/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  2 21:36 ./source/kde/polkit-kde-kcmodules-1
--rw-r--r--   1 root root        20 Dec  2 21:36 ./source/kde/polkit-kde-kcmodules-1/local.options
--rwxr-xr-x   1 root root      2975 Dec  2 21:36 ./source/kde/polkit-kde-kcmodules-1/polkit-kde-kcmodules-1.SlackBuild
--rw-r--r--   1 root root       346 Dec  2 21:28 ./source/kde/polkit-kde-kcmodules-1/pull-polkit-kde-kcmodules-1
--rw-r--r--   1 root root       810 Dec  2 21:37 ./source/kde/polkit-kde-kcmodules-1/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 18:31 ./source/kde/polkit-qt-1
--rw-r--r--   1 root root        41 Mar 21 18:32 ./source/kde/polkit-qt-1/local.options
--rwxr-xr-x   1 root root      2938 Mar 21 18:32 ./source/kde/polkit-qt-1/polkit-qt-1.SlackBuild
--rw-r--r--   1 root root       317 Mar 21 18:31 ./source/kde/polkit-qt-1/polkit-qt-1.null-checking.diff.gz
--rw-r--r--   1 root root       258 Dec  2 21:22 ./source/kde/polkit-qt-1/pull-polkit-qt-1
--rw-r--r--   1 root root       903 May  5  2010 ./source/kde/polkit-qt-1/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  5  2010 ./source/kde/skanlite
--rw-r--r--   1 root root       118 May 17  2008 ./source/kde/skanlite/doinst.sh.gz
--rw-r--r--   1 root root        12 Dec 29 03:59 ./source/kde/skanlite/local.options
--rwxr-xr-x   1 root root      2818 Jun  5  2010 ./source/kde/skanlite/skanlite.SlackBuild
--rw-r--r--   1 root root       666 Jan 14  2009 ./source/kde/skanlite/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 25 16:58 ./source/kde/src
-drwxr-xr-x   2 root root      4096 Mar 13 19:53 ./source/kde/src/extragear
--rw-r--r--   1 root root  13332440 Jan 11 16:11 ./source/kde/src/extragear/amarok-2.4.0.tar.xz
--rw-r--r--   1 root root   8590104 Jan 16 17:31 ./source/kde/src/extragear/k3b-2.0.2.tar.xz
--rw-r--r--   1 root root     62176 Jan  7 06:26 ./source/kde/src/extragear/kaudiocreator-r1212483.tar.xz
--rw-r--r--   1 root root    995644 Feb 12  2010 ./source/kde/src/extragear/konq-plugins-4.4.0.tar.xz
--rw-r--r--   1 root root     73404 Feb 12  2010 ./source/kde/src/extragear/kopete-cryptography-1.3.0-kde4.4.0.tar.xz
--rw-r--r--   1 root root   1943180 Dec 29 12:21 ./source/kde/src/extragear/ktorrent-4.0.5.tar.xz
--rw-r--r--   1 root root    746744 Dec 29 12:21 ./source/kde/src/extragear/libktorrent-1.0.5-3.tar.xz
--rw-r--r--   1 root root   1065356 Nov 30 19:56 ./source/kde/src/extragear/skanlite-0.7.tar.xz
--rw-r--r--   1 root root   4076212 Jan  4 16:15 ./source/kde/src/kdeaccessibility-4.5.5.tar.xz
--rw-r--r--   1 root root   1106292 Jan  4 16:15 ./source/kde/src/kdeadmin-4.5.5.tar.xz
--rw-r--r--   1 root root 107472308 Jan  4 16:21 ./source/kde/src/kdeartwork-4.5.5.tar.xz
--rw-r--r--   1 root root   2399616 Jan  4 16:18 ./source/kde/src/kdebase-4.5.5.tar.xz
--rw-r--r--   1 root root   5390148 Jan  4 16:15 ./source/kde/src/kdebase-runtime-4.5.5.tar.xz
--rw-r--r--   1 root root  60669260 Jan  4 16:19 ./source/kde/src/kdebase-workspace-4.5.5.tar.xz
--rw-r--r--   1 root root   5906628 Jan  4 16:18 ./source/kde/src/kdebindings-4.5.5.tar.xz
--rw-r--r--   1 root root  58687972 Jan  4 16:15 ./source/kde/src/kdeedu-4.5.5.tar.xz
--rw-r--r--   1 root root  52712260 Jan  4 16:19 ./source/kde/src/kdegames-4.5.5.tar.xz
--rw-r--r--   1 root root   4627976 Jan  4 16:15 ./source/kde/src/kdegraphics-4.5.5.tar.xz
--rw-r--r--   1 root root  12084912 Jan  4 16:21 ./source/kde/src/kdelibs-4.5.5.tar.xz
--rw-r--r--   1 root root   1428964 Jan  4 16:15 ./source/kde/src/kdemultimedia-4.5.5.tar.xz
--rw-r--r--   1 root root   7164888 Jan  4 16:15 ./source/kde/src/kdenetwork-4.5.5.tar.xz
--rw-r--r--   1 root root   8076128 Jan 27 16:41 ./source/kde/src/kdepim-4.4.10.tar.xz
--rw-r--r--   1 root root    533888 Jan 27 16:41 ./source/kde/src/kdepim-runtime-4.4.10.tar.xz
--rw-r--r--   1 root root   2271340 Jan  4 16:19 ./source/kde/src/kdepimlibs-4.5.5.tar.xz
--rw-r--r--   1 root root   1473152 Jan  4 16:19 ./source/kde/src/kdeplasma-addons-4.5.5.tar.xz
--rw-r--r--   1 root root   5011376 Jan  4 16:21 ./source/kde/src/kdesdk-4.5.5.tar.xz
--rw-r--r--   1 root root    376444 Jan  4 16:21 ./source/kde/src/kdetoys-4.5.5.tar.xz
--rw-r--r--   1 root root   3582940 Jan  4 16:15 ./source/kde/src/kdeutils-4.5.5.tar.xz
--rw-r--r--   1 root root   3699844 Apr  5 21:20 ./source/kde/src/kdevelop-4.2.2.tar.xz
--rw-r--r--   1 root root   1433800 Apr  5 21:44 ./source/kde/src/kdevplatform-1.2.2.tar.xz
--rw-r--r--   1 root root   2074344 Jan  4 16:21 ./source/kde/src/kdewebdev-4.5.5.tar.xz
--rw-r--r--   1 root root  69460992 Feb 23 20:13 ./source/kde/src/koffice-2.3.3.tar.xz
--rw-r--r--   1 root root     39992 Jul  5  2010 ./source/kde/src/polkit-kde-1-r1145544.tar.xz
--rw-r--r--   1 root root     17328 Dec  2 21:27 ./source/kde/src/polkit-kde-agent-1-20101202git.tar.xz
--rw-r--r--   1 root root     25240 Dec  2 21:28 ./source/kde/src/polkit-kde-kcmodules-1-20101202git.tar.xz
--rw-r--r--   1 root root     61840 Jul  5  2010 ./source/kde/src/polkit-qt-1-r1145513.tar.xz
-drwxr-xr-x   4 root root      4096 Jul 16  2010 ./source/kdei
-drwxr-xr-x   5 root root      4096 Jan 19 18:57 ./source/kdei/kde-l10n
--rw-r--r--   1 root root   3018421 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-ar-4.5.5.tar.bz2
--rw-r--r--   1 root root   1631594 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-bg-4.5.5.tar.bz2
--rw-r--r--   1 root root   3744364 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-ca-4.5.5.tar.bz2
--rw-r--r--   1 root root   1999760 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-ca@valencia-4.5.5.tar.bz2
--rw-r--r--   1 root root   2722346 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-cs-4.5.5.tar.bz2
--rw-r--r--   1 root root  12789665 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-da-4.5.5.tar.bz2
--rw-r--r--   1 root root  28603705 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-de-4.5.5.tar.bz2
--rw-r--r--   1 root root   2780801 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-el-4.5.5.tar.bz2
--rw-r--r--   1 root root   2689162 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-en_GB-4.5.5.tar.bz2
--rw-r--r--   1 root root   1716183 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-eo-4.5.5.tar.bz2
--rw-r--r--   1 root root  24716636 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-es-4.5.5.tar.bz2
--rw-r--r--   1 root root   5538080 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-et-4.5.5.tar.bz2
--rw-r--r--   1 root root   1803334 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-eu-4.5.5.tar.bz2
--rw-r--r--   1 root root   2110044 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-fi-4.5.5.tar.bz2
--rw-r--r--   1 root root  19920786 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-fr-4.5.5.tar.bz2
--rw-r--r--   1 root root    752677 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-fy-4.5.5.tar.bz2
--rw-r--r--   1 root root   3109525 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-ga-4.5.5.tar.bz2
--rw-r--r--   1 root root   3342956 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-gl-4.5.5.tar.bz2
--rw-r--r--   1 root root    819600 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-gu-4.5.5.tar.bz2
--rw-r--r--   1 root root   1932352 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-he-4.5.5.tar.bz2
--rw-r--r--   1 root root   1613489 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-hi-4.5.5.tar.bz2
--rw-r--r--   1 root root   1868383 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-hr-4.5.5.tar.bz2
--rw-r--r--   1 root root   3852047 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-hu-4.5.5.tar.bz2
--rw-r--r--   1 root root    389458 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-ia-4.5.5.tar.bz2
--rw-r--r--   1 root root    492988 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-id-4.5.5.tar.bz2
--rw-r--r--   1 root root   1603344 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-is-4.5.5.tar.bz2
--rw-r--r--   1 root root   9948813 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-it-4.5.5.tar.bz2
--rw-r--r--   1 root root   2068687 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-ja-4.5.5.tar.bz2
--rw-r--r--   1 root root   1381880 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-kk-4.5.5.tar.bz2
--rw-r--r--   1 root root   1791047 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-km-4.5.5.tar.bz2
--rw-r--r--   1 root root    433183 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-kn-4.5.5.tar.bz2
--rw-r--r--   1 root root   1479088 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-ko-4.5.5.tar.bz2
--rw-r--r--   1 root root   3331976 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-lt-4.5.5.tar.bz2
--rw-r--r--   1 root root   1844149 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-lv-4.5.5.tar.bz2
--rw-r--r--   1 root root  20318506 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-ml-4.5.5.tar.bz2
--rw-r--r--   1 root root   2220342 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-nb-4.5.5.tar.bz2
--rw-r--r--   1 root root   3453731 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-nds-4.5.5.tar.bz2
--rw-r--r--   1 root root  13167408 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-nl-4.5.5.tar.bz2
--rw-r--r--   1 root root   1837924 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-nn-4.5.5.tar.bz2
--rw-r--r--   1 root root   1514724 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-pa-4.5.5.tar.bz2
--rw-r--r--   1 root root   5637630 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-pl-4.5.5.tar.bz2
--rw-r--r--   1 root root   4988405 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-pt-4.5.5.tar.bz2
--rw-r--r--   1 root root  18438098 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-pt_BR-4.5.5.tar.bz2
--rw-r--r--   1 root root   2939162 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-ro-4.5.5.tar.bz2
--rw-r--r--   1 root root   7606562 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-ru-4.5.5.tar.bz2
--rw-r--r--   1 root root   4075553 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-sk-4.5.5.tar.bz2
--rw-r--r--   1 root root   3746951 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-sl-4.5.5.tar.bz2
--rw-r--r--   1 root root  10428953 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-sr-4.5.5.tar.bz2
--rw-r--r--   1 root root  14215078 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-sv-4.5.5.tar.bz2
--rw-r--r--   1 root root   1296435 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-th-4.5.5.tar.bz2
--rw-r--r--   1 root root   2137585 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-tr-4.5.5.tar.bz2
--rw-r--r--   1 root root  13570179 Jan  5 10:35 ./source/kdei/kde-l10n/kde-l10n-uk-4.5.5.tar.bz2
--rw-r--r--   1 root root   1615824 Jan  5 10:34 ./source/kdei/kde-l10n/kde-l10n-wa-4.5.5.tar.bz2
--rw-r--r--   1 root root   3172543 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-zh_CN-4.5.5.tar.bz2
--rw-r--r--   1 root root   2128435 Jan  5 10:36 ./source/kdei/kde-l10n/kde-l10n-zh_TW-4.5.5.tar.bz2
--rwxr-xr-x   1 root root      5404 Jan 23 19:38 ./source/kdei/kde-l10n/kde-l10n.SlackBuild
-drwxr-xr-x   2 root root      4096 Jan 23 19:37 ./source/kdei/kde-l10n/kdepim-l10n
--rwxr-xr-x   1 root root      1046 Jan 23 19:12 ./source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh
--rw-r--r--   1 root root    486936 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ar-4.4.5.tar.bz2
--rw-r--r--   1 root root    493466 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-bg-4.4.5.tar.bz2
--rw-r--r--   1 root root    610587 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ca-4.4.5.tar.bz2
--rw-r--r--   1 root root    362129 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ca@valencia-4.4.5.tar.bz2
--rw-r--r--   1 root root    336355 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-cs-4.4.5.tar.bz2
--rw-r--r--   1 root root       321 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-csb-4.4.5.tar.bz2
--rw-r--r--   1 root root   1525886 Jan 23 19:18 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-da-4.4.5.tar.bz2
--rw-r--r--   1 root root   2380888 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-de-4.4.5.tar.bz2
--rw-r--r--   1 root root    522201 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-el-4.4.5.tar.bz2
--rw-r--r--   1 root root    786080 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-en_GB-4.4.5.tar.bz2
--rw-r--r--   1 root root    409949 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-eo-4.4.5.tar.bz2
--rw-r--r--   1 root root   4466568 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-es-4.4.5.tar.bz2
--rw-r--r--   1 root root   2090097 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-et-4.4.5.tar.bz2
--rw-r--r--   1 root root    451630 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-eu-4.4.5.tar.bz2
--rw-r--r--   1 root root    530939 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fi-4.4.5.tar.bz2
--rw-r--r--   1 root root       507 Jan 19 18:42 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff.gz
--rw-r--r--   1 root root   2673277 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.tar.bz2
--rw-r--r--   1 root root    534264 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fy-4.4.5.tar.bz2
--rw-r--r--   1 root root    312274 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ga-4.4.5.tar.bz2
--rw-r--r--   1 root root    640340 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-gl-4.4.5.tar.bz2
--rw-r--r--   1 root root       109 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-gu-4.4.5.tar.bz2
--rw-r--r--   1 root root    388967 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-he-4.4.5.tar.bz2
--rw-r--r--   1 root root    330416 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-hi-4.4.5.tar.bz2
--rw-r--r--   1 root root    355603 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-hr-4.4.5.tar.bz2
--rw-r--r--   1 root root    559371 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-hu-4.4.5.tar.bz2
--rw-r--r--   1 root root       107 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-id-4.4.5.tar.bz2
--rw-r--r--   1 root root    454040 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-is-4.4.5.tar.bz2
--rw-r--r--   1 root root    981204 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-it-4.4.5.tar.bz2
--rw-r--r--   1 root root    318791 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ja-4.4.5.tar.bz2
--rw-r--r--   1 root root    464114 Jan 23 19:19 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-kk-4.4.5.tar.bz2
--rw-r--r--   1 root root    492472 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-km-4.4.5.tar.bz2
--rw-r--r--   1 root root       110 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-kn-4.4.5.tar.bz2
--rw-r--r--   1 root root    258859 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ko-4.4.5.tar.bz2
--rw-r--r--   1 root root    327862 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-lt-4.4.5.tar.bz2
--rw-r--r--   1 root root    473649 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-lv-4.4.5.tar.bz2
--rw-r--r--   1 root root       107 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-mai-4.4.5.tar.bz2
--rw-r--r--   1 root root    420017 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-mk-4.4.5.tar.bz2
--rw-r--r--   1 root root       109 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ml-4.4.5.tar.bz2
--rw-r--r--   1 root root    358975 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-nb-4.4.5.tar.bz2
--rw-r--r--   1 root root    465948 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-nds-4.4.5.tar.bz2
--rw-r--r--   1 root root    834570 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-nl-4.4.5.tar.bz2
--rw-r--r--   1 root root    354219 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-nn-4.4.5.tar.bz2
--rw-r--r--   1 root root    352073 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-pa-4.4.5.tar.bz2
--rw-r--r--   1 root root    539967 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-pl-4.4.5.tar.bz2
--rw-r--r--   1 root root    992914 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-pt-4.4.5.tar.bz2
--rw-r--r--   1 root root    905746 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-pt_BR-4.4.5.tar.bz2
--rw-r--r--   1 root root    426377 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ro-4.4.5.tar.bz2
--rw-r--r--   1 root root   1721399 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-ru-4.4.5.tar.bz2
--rw-r--r--   1 root root     56176 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-si-4.4.5.tar.bz2
--rw-r--r--   1 root root    336068 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-sk-4.4.5.tar.bz2
--rw-r--r--   1 root root    575363 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-sl-4.4.5.tar.bz2
--rw-r--r--   1 root root      4656 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-sr-4.4.5.tar.bz2
--rw-r--r--   1 root root   3014518 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-sv-4.4.5.tar.bz2
--rw-r--r--   1 root root    439429 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-tg-4.4.5.tar.bz2
--rw-r--r--   1 root root    459217 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-tr-4.4.5.tar.bz2
--rw-r--r--   1 root root   1170409 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-uk-4.4.5.tar.bz2
--rw-r--r--   1 root root    221472 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-wa-4.4.5.tar.bz2
--rw-r--r--   1 root root    477865 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-zh_CN-4.4.5.tar.bz2
--rw-r--r--   1 root root    496889 Jan 23 19:20 ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-zh_TW-4.4.5.tar.bz2
--rw-r--r--   1 root root       187 Jan 19 18:57 ./source/kdei/kde-l10n/languages
-drwxr-xr-x   2 root root      4096 May 26  2008 ./source/kdei/kde-l10n/local.options
-drwxr-xr-x   2 root root      4096 Dec  8 05:34 ./source/kdei/kde-l10n/slack-desc
--rw-r--r--   1 root root       188 Jan 21  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ar
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bg
--rw-r--r--   1 root root       225 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bn_IN
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca
--rw-r--r--   1 root root       300 Jan 21  2010 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-cs
--rw-r--r--   1 root root       203 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-csb
--rw-r--r--   1 root root       188 Jul 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-da
--rw-r--r--   1 root root       188 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-de
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-el
--rw-r--r--   1 root root       230 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-en_GB
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eo
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-es
--rw-r--r--   1 root root       190 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-et
--rw-r--r--   1 root root       188 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eu
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fi
--rw-r--r--   1 root root       188 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fr
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fy
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ga
--rw-r--r--   1 root root       190 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gl
--rw-r--r--   1 root root       190 Jan 21  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gu
--rw-r--r--   1 root root       188 Jan 21  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-he
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hi
--rw-r--r--   1 root root       207 Oct 21  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne
--rw-r--r--   1 root root       190 Oct 21  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hu
--rw-r--r--   1 root root       193 Dec  8 05:34 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ia
--rw-r--r--   1 root root       192 Feb  5  2010 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id
--rw-r--r--   1 root root       191 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-is
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-it
--rw-r--r--   1 root root       190 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ja
--rw-r--r--   1 root root       188 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kk
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-km
--rw-r--r--   1 root root       189 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kn
--rw-r--r--   1 root root       188 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ko
--rw-r--r--   1 root root       189 Jul 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ku
--rw-r--r--   1 root root       192 Jul 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lt
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lv
--rw-r--r--   1 root root       202 Jan 27  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mai
--rw-r--r--   1 root root       192 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mk
--rw-r--r--   1 root root       191 Jul 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ml
--rw-r--r--   1 root root       189 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mr
--rw-r--r--   1 root root       201 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nb
--rw-r--r--   1 root root       203 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nds
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nl
--rw-r--r--   1 root root       201 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nn
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pa
--rw-r--r--   1 root root       188 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pl
--rw-r--r--   1 root root       192 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt
--rw-r--r--   1 root root       238 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt_BR
--rw-r--r--   1 root root       190 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ro
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ru
--rw-r--r--   1 root root       189 Jan 21  2010 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si
--rw-r--r--   1 root root       188 Apr  3  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sk
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sl
--rw-r--r--   1 root root       189 Jul 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sr
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sv
--rw-r--r--   1 root root       187 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ta
--rw-r--r--   1 root root       187 Mar  6  2009 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tg
--rw-r--r--   1 root root       186 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-th
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tr
--rw-r--r--   1 root root       191 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-uk
--rw-r--r--   1 root root       189 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-wa
--rw-r--r--   1 root root       236 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_CN
--rw-r--r--   1 root root       225 May 26  2008 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_TW
-drwxr-xr-x   3 root root      4096 Mar  1 23:54 ./source/kdei/koffice-l10n
--rw-r--r--   1 root root    602048 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-ca-2.3.2.tar.bz2
--rw-r--r--   1 root root    333533 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-ca@valencia-2.3.2.tar.bz2
--rw-r--r--   1 root root    574454 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-da-2.3.2.tar.bz2
--rw-r--r--   1 root root   1309655 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-de-2.3.2.tar.bz2
--rw-r--r--   1 root root    344811 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-el-2.3.2.tar.bz2
--rw-r--r--   1 root root    335363 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-en_GB-2.3.2.tar.bz2
--rw-r--r--   1 root root   6265591 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-es-2.3.2.tar.bz2
--rw-r--r--   1 root root    732317 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-et-2.3.2.tar.bz2
--rw-r--r--   1 root root   6343416 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-fr-2.3.2.tar.bz2
--rw-r--r--   1 root root    366933 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-gl-2.3.2.tar.bz2
--rw-r--r--   1 root root    383914 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-hu-2.3.2.tar.bz2
--rw-r--r--   1 root root    709685 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-it-2.3.2.tar.bz2
--rw-r--r--   1 root root    301144 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-ja-2.3.2.tar.bz2
--rw-r--r--   1 root root    333005 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-kk-2.3.2.tar.bz2
--rw-r--r--   1 root root    329542 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-nb-2.3.2.tar.bz2
--rw-r--r--   1 root root    971904 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-nds-2.3.2.tar.bz2
--rw-r--r--   1 root root   2787702 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-nl-2.3.2.tar.bz2
--rw-r--r--   1 root root    357991 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-pl-2.3.2.tar.bz2
--rw-r--r--   1 root root    609615 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-pt-2.3.2.tar.bz2
--rw-r--r--   1 root root    848370 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-pt_BR-2.3.2.tar.bz2
--rw-r--r--   1 root root    558576 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-ru-2.3.2.tar.bz2
--rw-r--r--   1 root root   2447736 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-sv-2.3.2.tar.bz2
--rw-r--r--   1 root root    322498 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-tr-2.3.2.tar.bz2
--rw-r--r--   1 root root    651651 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-uk-2.3.2.tar.bz2
--rw-r--r--   1 root root    331887 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-wa-2.3.2.tar.bz2
--rw-r--r--   1 root root    292546 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-zh_CN-2.3.2.tar.bz2
--rw-r--r--   1 root root    334294 Feb 17 16:02 ./source/kdei/koffice-l10n/koffice-l10n-zh_TW-2.3.2.tar.bz2
--rwxr-xr-x   1 root root      4029 Mar  1 23:02 ./source/kdei/koffice-l10n/koffice-l10n.SlackBuild
--rw-r--r--   1 root root       103 Mar  1 23:54 ./source/kdei/koffice-l10n/languages
-drwxr-xr-x   2 root root      4096 Apr 10  2010 ./source/kdei/koffice-l10n/slack-desc
--rw-r--r--   1 root root       709 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-af
--rw-r--r--   1 root root       240 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ar
--rw-r--r--   1 root root       711 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-az
--rw-r--r--   1 root root       243 Jun 11  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bg
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-br
--rw-r--r--   1 root root       241 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bs
--rw-r--r--   1 root root       241 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca
--rw-r--r--   1 root root       370 Apr 10  2010 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca@valencia
--rw-r--r--   1 root root       705 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cs
--rw-r--r--   1 root root       239 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cy
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-da
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-de
--rw-r--r--   1 root root       239 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-el
--rw-r--r--   1 root root       751 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-en_GB
--rw-r--r--   1 root root       709 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eo
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-es
--rw-r--r--   1 root root       708 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-et
--rw-r--r--   1 root root       706 Jan 29  2006 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eu
--rw-r--r--   1 root root       249 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fa
--rw-r--r--   1 root root       241 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fi
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fr
--rw-r--r--   1 root root       243 Nov 24  2008 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fy
--rw-r--r--   1 root root       712 Apr 17  2006 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ga
--rw-r--r--   1 root root       708 Feb 16  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-gl
--rw-r--r--   1 root root       240 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-he
--rw-r--r--   1 root root       239 Apr 17  2006 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hi
--rw-r--r--   1 root root       259 Oct 21  2009 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hne
--rw-r--r--   1 root root       259 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hsb
--rw-r--r--   1 root root       709 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hu
--rw-r--r--   1 root root       243 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-is
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-it
--rw-r--r--   1 root root       708 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ja
--rw-r--r--   1 root root       240 Nov 24  2008 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-kk
--rw-r--r--   1 root root       705 Apr 22  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-km
--rw-r--r--   1 root root       237 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lo
--rw-r--r--   1 root root       710 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lt
--rw-r--r--   1 root root       241 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lv
--rw-r--r--   1 root root       244 Feb 16  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mk
--rw-r--r--   1 root root       705 Jun  2  2006 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ms
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mt
--rw-r--r--   1 root root       253 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nb
--rw-r--r--   1 root root       255 Jun 11  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nds
--rw-r--r--   1 root root       240 Jun 11  2007 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ne
--rw-r--r--   1 root root       705 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nl
--rw-r--r--   1 root root       253 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nn
--rw-r--r--   1 root root       719 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no
--rw-r--r--   1 root root       758 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no_NY
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pl
--rw-r--r--   1 root root       710 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt
--rw-r--r--   1 root root       756 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt_BR
--rw-r--r--   1 root root       708 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ro
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ru
--rw-r--r--   1 root root       713 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-se
--rw-r--r--   1 root root       706 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sk
--rw-r--r--   1 root root       709 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sl
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr
--rw-r--r--   1 root root       788 Jul 27  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr@Latn
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sv
--rw-r--r--   1 root root       705 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ta
--rw-r--r--   1 root root       239 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tg
--rw-r--r--   1 root root       238 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-th
--rw-r--r--   1 root root       707 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tr
--rw-r--r--   1 root root       709 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uk
--rw-r--r--   1 root root       239 Apr 17  2006 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uz
--rw-r--r--   1 root root       251 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ven
--rw-r--r--   1 root root       707 Jun  3  2009 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-wa
--rw-r--r--   1 root root       239 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-xh
--rw-r--r--   1 root root       288 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_CN
--rw-r--r--   1 root root       277 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_TW
--rw-r--r--   1 root root       238 Jun 23  2005 ./source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zu
-drwxr-xr-x 194 root root      4096 Apr 20 03:02 ./source/l
-drwxr-xr-x   2 root root      4096 Dec 15 20:53 ./source/l/ConsoleKit
--rw-r--r--   1 root root    344004 Nov 17 01:05 ./source/l/ConsoleKit/ConsoleKit-0.4.3.tar.xz
--rwxr-xr-x   1 root root      4512 Mar 31 20:55 ./source/l/ConsoleKit/ConsoleKit.SlackBuild
--rw-r--r--   1 root root       854 May  4  2009 ./source/l/ConsoleKit/consolekit-0.2.10-cleanup_console_tags.patch.gz
--rw-r--r--   1 root root      2210 Sep 28  2010 ./source/l/ConsoleKit/consolekit-0.4.2-revert.patch.gz
--rw-r--r--   1 root root       353 Sep 28  2010 ./source/l/ConsoleKit/doinst.sh.gz
--rw-r--r--   1 root root       411 Jul  7  2009 ./source/l/ConsoleKit/pam-foreground-compat.ck
--rw-r--r--   1 root root       572 Dec  2 19:03 ./source/l/ConsoleKit/rc.consolekit
--rw-r--r--   1 root root       790 May  4  2010 ./source/l/ConsoleKit/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  4  2010 ./source/l/M2Crypto
--rw-r--r--   1 root root    284604 Oct  7  2009 ./source/l/M2Crypto/M2Crypto-0.20.2.tar.xz
--rwxr-xr-x   1 root root      2842 Aug  4  2010 ./source/l/M2Crypto/M2Crypto.SlackBuild
--rw-r--r--   1 root root      1050 Mar 31  2009 ./source/l/M2Crypto/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 29 06:05 ./source/l/PyQt
--rw-r--r--   1 root root   8044248 Nov 29 06:03 ./source/l/PyQt/PyQt-x11-gpl-4.8.1.tar.xz
--rwxr-xr-x   1 root root      3163 Nov 29 06:05 ./source/l/PyQt/PyQt.SlackBuild
--rw-r--r--   1 root root       158 Nov 28  2009 ./source/l/PyQt/PyQt.info
--rw-r--r--   1 root root       254 Mar 25  2010 ./source/l/PyQt/PyQt.phonon.diff.gz
--rw-r--r--   1 root root       731 May  4  2010 ./source/l/PyQt/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 29 05:56 ./source/l/QScintilla
--rw-r--r--   1 root root    944464 Aug 31  2010 ./source/l/QScintilla/QScintilla-gpl-2.4.5.tar.xz
--rwxr-xr-x   1 root root      3139 Mar 25 18:10 ./source/l/QScintilla/QScintilla.SlackBuild
--rw-r--r--   1 root root      1127 Jul 31  2008 ./source/l/QScintilla/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/aalib
--rw-r--r--   1 root root    391028 Apr 26  2001 ./source/l/aalib/aalib-1.4rc5.tar.gz
--rwxr-xr-x   1 root root      3784 Jan 23 07:26 ./source/l/aalib/aalib.SlackBuild
--rw-r--r--   1 root root      1451 Mar 28  2002 ./source/l/aalib/slack-desc
--rw-r--r--   1 root root      1305 Mar 28  2002 ./source/l/aalib/slack-desc.11line
-drwxr-xr-x   2 root root      4096 Nov 21 03:10 ./source/l/akonadi
--rw-r--r--   1 root root    229469 Oct 22  2010 ./source/l/akonadi/akonadi-1.4.1.tar.bz2
--rwxr-xr-x   1 root root      3289 Mar 24 01:56 ./source/l/akonadi/akonadi.SlackBuild
--rw-r--r--   1 root root       110 Aug 31  2009 ./source/l/akonadi/doinst.sh.gz
--rw-r--r--   1 root root       840 May  4  2010 ./source/l/akonadi/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 05:40 ./source/l/alsa-lib
--rw-r--r--   1 root root    636476 Jan 31 14:27 ./source/l/alsa-lib/alsa-lib-1.0.24.1.tar.xz
--rwxr-xr-x   1 root root      3315 Feb  1 02:20 ./source/l/alsa-lib/alsa-lib.SlackBuild
--rw-r--r--   1 root root       861 Aug 29  2003 ./source/l/alsa-lib/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/alsa-oss
--rw-r--r--   1 root root    248726 Jul 14  2008 ./source/l/alsa-oss/alsa-oss-1.0.17.tar.bz2
--rwxr-xr-x   1 root root      3021 Aug  5  2010 ./source/l/alsa-oss/alsa-oss.SlackBuild
--rw-r--r--   1 root root       962 Aug 29  2003 ./source/l/alsa-oss/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12 19:18 ./source/l/apr
-drwxr-xr-x   2 root root      4096 Feb 10 04:52 ./source/l/apr-util
--rw-r--r--   1 root root    607912 Oct  3  2010 ./source/l/apr-util/apr-util-1.3.10.tar.bz2
--rw-r--r--   1 root root       836 Oct  3  2010 ./source/l/apr-util/apr-util-1.3.10.tar.bz2.asc
--rwxr-xr-x   1 root root      3874 Feb 10 04:52 ./source/l/apr-util/apr-util.SlackBuild
--rw-r--r--   1 root root       942 Jul 29  2006 ./source/l/apr-util/slack-desc
--rw-r--r--   1 root root    766793 Jul 18  2010 ./source/l/apr/apr-1.4.2.tar.bz2
--rw-r--r--   1 root root       836 Jul 18  2010 ./source/l/apr/apr-1.4.2.tar.bz2.asc
--rwxr-xr-x   1 root root      3487 Feb 12 19:20 ./source/l/apr/apr.SlackBuild
--rw-r--r--   1 root root       226 Feb 12 19:18 ./source/l/apr/apr.apr_ring.h.gcc45.diff.gz
--rw-r--r--   1 root root       729 Jul 29  2006 ./source/l/apr/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  5  2010 ./source/l/aspell
-drwxr-xr-x   2 root root      4096 Aug 13  2009 ./source/l/aspell-dict
--rw-r--r--   1 root root    256111 Mar 15  2004 ./source/l/aspell-dict/aspell-af-0.50-0.tar.bz2
--rw-r--r--   1 root root     68055 Apr 17  2003 ./source/l/aspell-dict/aspell-br-0.50-2.tar.bz2
--rw-r--r--   1 root root    117652 Apr 17  2003 ./source/l/aspell-dict/aspell-cy-0.50-3.tar.bz2
--rwxr-xr-x   1 root root      2446 May 19  2009 ./source/l/aspell-dict/aspell-dict.SlackBuild
--rw-r--r--   1 root root    328225 Apr 17  2003 ./source/l/aspell-dict/aspell-el-0.50-3.tar.bz2
--rw-r--r--   1 root root     89703 Apr 17  2003 ./source/l/aspell-dict/aspell-eo-0.50-2.tar.bz2
--rw-r--r--   1 root root    157809 Apr 17  2003 ./source/l/aspell-dict/aspell-es-0.50-2.tar.bz2
--rw-r--r--   1 root root    283086 Apr 17  2003 ./source/l/aspell-dict/aspell-fr-0.50-3.tar.bz2
--rw-r--r--   1 root root    112313 Mar 10  2004 ./source/l/aspell-dict/aspell-gl-0.50-0.tar.bz2
--rw-r--r--   1 root root     69462 Apr  5  2004 ./source/l/aspell-dict/aspell-gv-0.50-0.tar.bz2
--rw-r--r--   1 root root    208118 Mar 30  2004 ./source/l/aspell-dict/aspell-hr-0.51-0.tar.bz2
--rw-r--r--   1 root root     70883 Mar 30  2004 ./source/l/aspell-dict/aspell-ia-0.50-1.tar.bz2
--rw-r--r--   1 root root    323850 Mar 13  2004 ./source/l/aspell-dict/aspell-is-0.51.1-0.tar.bz2
--rw-r--r--   1 root root     57818 Mar 15  2004 ./source/l/aspell-dict/aspell-mi-0.50-0.tar.bz2
--rw-r--r--   1 root root    122690 Apr 23  2004 ./source/l/aspell-dict/aspell-mk-0.50-0.tar.bz2
--rw-r--r--   1 root root     50368 Mar 15  2004 ./source/l/aspell-dict/aspell-ms-0.50-0.tar.bz2
--rw-r--r--   1 root root    124114 Mar 25  2004 ./source/l/aspell-dict/aspell-mt-0.50-0.tar.bz2
--rw-r--r--   1 root root    423161 Jul 21  2009 ./source/l/aspell-dict/aspell-nb-0.50.1-0.tar.bz2
--rw-r--r--   1 root root    428365 Apr 17  2003 ./source/l/aspell-dict/aspell-nl-0.50-2.tar.bz2
--rw-r--r--   1 root root    335156 Apr  5  2004 ./source/l/aspell-dict/aspell-nn-0.50.1-1.tar.bz2
--rw-r--r--   1 root root    286696 Apr 17  2003 ./source/l/aspell-dict/aspell-no-0.50-2.tar.bz2
--rw-r--r--   1 root root    624458 Mar 10  2004 ./source/l/aspell-dict/aspell-pl-0.51-0.tar.bz2
--rw-r--r--   1 root root    201341 Apr 17  2003 ./source/l/aspell-dict/aspell-pt-0.50-2.tar.bz2
--rw-r--r--   1 root root     64110 Apr 17  2003 ./source/l/aspell-dict/aspell-ro-0.50-2.tar.bz2
--rw-r--r--   1 root root     21821 May 19  2004 ./source/l/aspell-dict/aspell-rw-0.50-0.tar.bz2
--rw-r--r--   1 root root    383840 Apr 16  2004 ./source/l/aspell-dict/aspell-sk-0.52-0.tar.bz2
--rw-r--r--   1 root root    215463 Mar 15  2004 ./source/l/aspell-dict/aspell-sl-0.50-0.tar.bz2
--rw-r--r--   1 root root     93942 Mar 10  2004 ./source/l/aspell-dict/aspell-sv-0.51-0.tar.bz2
--rw-r--r--   1 root root    102172 Mar 29  2004 ./source/l/aspell-dict/aspell-sw-0.50-0.tar.bz2
--rw-r--r--   1 root root     84846 Mar 29  2004 ./source/l/aspell-dict/aspell-tr-0.50-0.tar.bz2
--rw-r--r--   1 root root    382513 Mar 10  2004 ./source/l/aspell-dict/aspell-uk-0.51-0.tar.bz2
--rw-r--r--   1 root root     50363 Mar 29  2004 ./source/l/aspell-dict/aspell-wa-0.50-0.tar.bz2
--rw-r--r--   1 root root    168226 Mar 29  2004 ./source/l/aspell-dict/aspell-zu-0.50-0.tar.bz2
--rw-r--r--   1 root root    653405 Jul  5  2004 ./source/l/aspell-dict/aspell5-be-0.01.tar.bz2
--rw-r--r--   1 root root    176676 May 28  2004 ./source/l/aspell-dict/aspell5-bg-4.0-0.tar.bz2
--rw-r--r--   1 root root    317688 Aug 13  2004 ./source/l/aspell-dict/aspell5-da-1.4.42-1.tar.bz2
--rw-r--r--   1 root root    165901 Aug 13  2004 ./source/l/aspell-dict/aspell5-fo-0.2.16-1.tar.bz2
--rw-r--r--   1 root root    539910 Jan  7  2005 ./source/l/aspell-dict/aspell5-ga-3.6-0.tar.bz2
--rw-r--r--   1 root root     51167 Aug 13  2004 ./source/l/aspell-dict/aspell5-gd-0.1.1-1.tar.bz2
--rw-r--r--   1 root root     46288 Apr  6  2005 ./source/l/aspell-dict/aspell5-hil-0.11-0.tar.bz2
--rw-r--r--   1 root root     76958 Aug 12  2004 ./source/l/aspell-dict/aspell5-id-1.2-0.tar.bz2
--rw-r--r--   1 root root     23870 Sep 22  2004 ./source/l/aspell-dict/aspell5-ku-0.12-0.tar.bz2
--rw-r--r--   1 root root     45331 Sep 10  2004 ./source/l/aspell-dict/aspell5-mg-0.03-0.tar.bz2
--rw-r--r--   1 root root     22952 Aug 10  2004 ./source/l/aspell-dict/aspell5-ny-0.01-0.tar.bz2
--rw-r--r--   1 root root    281538 Jun  1  2004 ./source/l/aspell-dict/aspell5-sc-1.0.tar.bz2
--rw-r--r--   1 root root     33044 Jun  2  2004 ./source/l/aspell-dict/aspell5-tet-0.1.1.tar.bz2
--rw-r--r--   1 root root     40642 Aug  6  2004 ./source/l/aspell-dict/aspell5-tl-0.02-1.tar.bz2
--rw-r--r--   1 root root     22127 Aug 13  2004 ./source/l/aspell-dict/aspell5-tn-1.0.1-0.tar.bz2
--rw-r--r--   1 root root     40493 Dec 28  2004 ./source/l/aspell-dict/aspell6-am-0.03-1.tar.bz2
--rw-r--r--   1 root root     50588 Aug 27  2004 ./source/l/aspell-dict/aspell6-az-0.02-0.tar.bz2
--rw-r--r--   1 root root    117436 Aug 27  2004 ./source/l/aspell-dict/aspell6-bn-0.01.1-1.tar.bz2
--rw-r--r--   1 root root    222986 Aug 27  2004 ./source/l/aspell-dict/aspell6-ca-20040130-1.tar.bz2
--rw-r--r--   1 root root    451507 Aug 27  2004 ./source/l/aspell-dict/aspell6-cs-20040614-1.tar.bz2
--rw-r--r--   1 root root     32694 Mar 11  2005 ./source/l/aspell-dict/aspell6-csb-0.02-0.tar.bz2
--rw-r--r--   1 root root    274407 Nov  4  2004 ./source/l/aspell-dict/aspell6-de-20030222-1.tar.bz2
--rw-r--r--   1 root root    182442 Aug 27  2004 ./source/l/aspell-dict/aspell6-en-6.0-0.tar.bz2
--rw-r--r--   1 root root    338155 Aug 27  2004 ./source/l/aspell-dict/aspell6-et-0.1.21-1.tar.bz2
--rw-r--r--   1 root root     97168 Nov  4  2004 ./source/l/aspell-dict/aspell6-fa-0.02-0.tar.bz2
--rw-r--r--   1 root root    209249 Aug 27  2004 ./source/l/aspell-dict/aspell6-fi-0.7-0.tar.bz2
--rw-r--r--   1 root root     30949 Jan 17  2006 ./source/l/aspell-dict/aspell6-gu-0.02-0.tar.bz2
--rw-r--r--   1 root root    122781 May 21  2006 ./source/l/aspell-dict/aspell6-he-1.0-0.tar.bz2
--rw-r--r--   1 root root     51021 Jan 27  2005 ./source/l/aspell-dict/aspell6-hi-0.01-0.tar.bz2
--rw-r--r--   1 root root    109026 Aug 27  2004 ./source/l/aspell-dict/aspell6-hsb-0.01-1.tar.bz2
--rw-r--r--   1 root root    375949 Aug 27  2004 ./source/l/aspell-dict/aspell6-hu-0.99.4.2-0.tar.bz2
--rw-r--r--   1 root root    216189 Jun  1  2005 ./source/l/aspell-dict/aspell6-it-2.2_20050523-0.tar.bz2
--rw-r--r--   1 root root     42722 Aug 27  2004 ./source/l/aspell-dict/aspell6-la-20020503-0.tar.bz2
--rw-r--r--   1 root root    153912 Jan 18  2006 ./source/l/aspell-dict/aspell6-lt-1.1+cvs20060103-0.tar.bz2
--rw-r--r--   1 root root     72416 Aug 27  2004 ./source/l/aspell-dict/aspell6-lv-0.5.5-1.tar.bz2
--rw-r--r--   1 root root     35446 Aug 27  2004 ./source/l/aspell-dict/aspell6-mn-0.01-0.tar.bz2
--rw-r--r--   1 root root    151720 May 25  2005 ./source/l/aspell-dict/aspell6-mr-0.10-0.tar.bz2
--rw-r--r--   1 root root     32658 Dec 28  2004 ./source/l/aspell-dict/aspell6-nds-0.01-0.tar.bz2
--rw-r--r--   1 root root     20525 Jan 25  2005 ./source/l/aspell-dict/aspell6-or-0.03-1.tar.bz2
--rw-r--r--   1 root root     22143 Jan 25  2005 ./source/l/aspell-dict/aspell6-pa-0.01-1.tar.bz2
--rw-r--r--   1 root root    864887 Jul 18  2008 ./source/l/aspell-dict/aspell6-pt_BR-20080707-0.tar.bz2
--rw-r--r--   1 root root     85541 Aug 27  2004 ./source/l/aspell-dict/aspell6-qu-0.02-0.tar.bz2
--rw-r--r--   1 root root    427312 Aug 27  2004 ./source/l/aspell-dict/aspell6-ru-0.99f7-1.tar.bz2
--rw-r--r--   1 root root    574923 Nov 11  2005 ./source/l/aspell-dict/aspell6-sr-0.02.tar.bz2
--rw-r--r--   1 root root     44452 Aug 27  2004 ./source/l/aspell-dict/aspell6-ta-20040424-1.tar.bz2
--rw-r--r--   1 root root    310738 Sep 29  2005 ./source/l/aspell-dict/aspell6-te-0.01-2.tar.bz2
--rw-r--r--   1 root root    179098 Nov  6  2005 ./source/l/aspell-dict/aspell6-uk-1.1-0.tar.bz2
--rw-r--r--   1 root root     71160 Jan 15  2006 ./source/l/aspell-dict/aspell6-uz-0.5-0.tar.bz2
--rw-r--r--   1 root root     30843 Aug 27  2004 ./source/l/aspell-dict/aspell6-vi-0.01.1-1.tar.bz2
--rw-r--r--   1 root root     74382 Aug 27  2004 ./source/l/aspell-dict/aspell6-yi-0.01.1-1.tar.bz2
--rw-r--r--   1 root root    864576 Apr 16  2008 ./source/l/aspell/aspell-0.60.6.tar.xz
--rwxr-xr-x   1 root root      3359 Aug  5  2010 ./source/l/aspell/aspell.SlackBuild
--rw-r--r--   1 root root       708 Jan 13  2003 ./source/l/aspell/slack-desc
-drwxr-xr-x   2 root root      4096 Sep 28  2010 ./source/l/atk
--rw-r--r--   1 root root    688186 Sep 27  2010 ./source/l/atk/atk-1.32.0.tar.bz2
--rwxr-xr-x   1 root root      2896 Apr 30  2010 ./source/l/atk/atk.SlackBuild
--rw-r--r--   1 root root       627 Feb 11  2008 ./source/l/atk/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  7  2010 ./source/l/attica
--rw-r--r--   1 root root     33349 Jun  7  2010 ./source/l/attica/attica-0.1.4.tar.bz2
--rwxr-xr-x   1 root root      3030 Jun  7  2010 ./source/l/attica/attica.SlackBuild
--rw-r--r--   1 root root       831 May  4  2010 ./source/l/attica/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  5  2010 ./source/l/audiofile
--rw-r--r--   1 root root    301344 Mar 22  2010 ./source/l/audiofile/audiofile-0.2.7.tar.xz
--rwxr-xr-x   1 root root      3984 Aug  5  2010 ./source/l/audiofile/audiofile.SlackBuild
--rw-r--r--   1 root root       775 Feb  9  2002 ./source/l/audiofile/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/automoc4
--rw-r--r--   1 root root      9153 Jan 22  2009 ./source/l/automoc4/automoc4-0.9.88.tar.bz2
--rwxr-xr-x   1 root root      2859 Aug  5  2010 ./source/l/automoc4/automoc4.SlackBuild
--rw-r--r--   1 root root       912 Jan  3  2009 ./source/l/automoc4/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  8 02:00 ./source/l/babl
--rw-r--r--   1 root root    349288 Jan 14  2010 ./source/l/babl/babl-0.1.2.tar.xz
--rwxr-xr-x   1 root root      3032 Nov  8 02:00 ./source/l/babl/babl.SlackBuild
--rw-r--r--   1 root root       975 Oct  2  2008 ./source/l/babl/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 28 05:25 ./source/l/boost
--rwxr-xr-x   1 root root      4968 Nov 28 05:31 ./source/l/boost/boost.SlackBuild
--rw-r--r--   1 root root  34263508 Nov 17 14:52 ./source/l/boost/boost_1_45_0.tar.xz
--rw-r--r--   1 root root       889 Aug  1  2008 ./source/l/boost/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  8 18:10 ./source/l/cairo
--rw-r--r--   1 root root       354 Oct 17  2010 ./source/l/cairo/cairo-1.10.0-buggy_gradients.patch.gz
--rw-r--r--   1 root root  19646268 Dec 25 23:03 ./source/l/cairo/cairo-1.10.2.tar.xz
--rwxr-xr-x   1 root root      3652 Mar 19 19:04 ./source/l/cairo/cairo.SlackBuild
--rw-r--r--   1 root root       851 Jan 18  2006 ./source/l/cairo/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  5  2010 ./source/l/chmlib
--rw-r--r--   1 root root    252036 May 23  2009 ./source/l/chmlib/chmlib-0.40.tar.bz2
--rwxr-xr-x   1 root root      3064 Mar 29 04:29 ./source/l/chmlib/chmlib.SlackBuild
--rw-r--r--   1 root root       164 Jan  8  2008 ./source/l/chmlib/chmlib.info
--rw-r--r--   1 root root       927 Aug  1  2008 ./source/l/chmlib/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/clucene
--rw-r--r--   1 root root   1539103 Oct 23  2008 ./source/l/clucene/clucene-core-0.9.21b.tar.bz2
--rwxr-xr-x   1 root root      3161 Aug  5  2010 ./source/l/clucene/clucene.SlackBuild
--rw-r--r--   1 root root       198 Dec 20  2007 ./source/l/clucene/clucene.info
--rw-r--r--   1 root root       357 Aug  1  2008 ./source/l/clucene/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/db42
--rw-r--r--   1 root root   3045196 Dec  4  2003 ./source/l/db42/db-4.2.52.tar.bz2
--rwxr-xr-x   1 root root      4771 Aug  5  2010 ./source/l/db42/db42.SlackBuild
--rw-r--r--   1 root root       544 Dec 19  2003 ./source/l/db42/patch.4.2.52.1.gz
--rw-r--r--   1 root root       466 Feb  2  2004 ./source/l/db42/patch.4.2.52.2.gz
--rw-r--r--   1 root root      1683 Dec  9  2005 ./source/l/db42/patch.4.2.52.3.gz
--rw-r--r--   1 root root       427 Dec  9  2005 ./source/l/db42/patch.4.2.52.4.gz
--rw-r--r--   1 root root       819 Mar  4  2006 ./source/l/db42/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/db44
--rw-r--r--   1 root root   6886251 Jan 10  2006 ./source/l/db44/db-4.4.20.tar.bz2
--rwxr-xr-x   1 root root      4345 Aug  6  2010 ./source/l/db44/db44.SlackBuild
--rw-r--r--   1 root root       515 Feb  3  2006 ./source/l/db44/patch.4.4.20.1.gz
--rw-r--r--   1 root root       392 Feb  3  2006 ./source/l/db44/patch.4.4.20.2.gz
--rw-r--r--   1 root root       818 Mar  8  2006 ./source/l/db44/slack-desc
-drwxr-xr-x   2 root root      4096 Sep 14  2010 ./source/l/dbus-glib
--rw-r--r--   1 root root    454004 Aug 12  2010 ./source/l/dbus-glib/dbus-glib-0.88.tar.xz
--rwxr-xr-x   1 root root      3189 Nov  3 19:36 ./source/l/dbus-glib/dbus-glib.SlackBuild
--rw-r--r--   1 root root       681 Mar 16  2007 ./source/l/dbus-glib/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 27  2010 ./source/l/dbus-python
--rw-r--r--   1 root root    533391 Feb 18  2010 ./source/l/dbus-python/dbus-python-0.83.1.tar.gz
--rwxr-xr-x   1 root root      3123 Apr 27  2010 ./source/l/dbus-python/dbus-python.SlackBuild
--rw-r--r--   1 root root       702 Apr  4  2008 ./source/l/dbus-python/slack-desc
-drwxr-xr-x   2 root root      4096 May 11  2010 ./source/l/desktop-file-utils
--rw-r--r--   1 root root    282640 Mar 10  2010 ./source/l/desktop-file-utils/desktop-file-utils-0.16.tar.bz2
--rwxr-xr-x   1 root root      4151 May 11  2010 ./source/l/desktop-file-utils/desktop-file-utils.SlackBuild
--rw-r--r--   1 root root       354 May 11  2010 ./source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff.gz
--rw-r--r--   1 root root       128 Oct  7  2008 ./source/l/desktop-file-utils/doinst.sh.gz
--rw-r--r--   1 root root      1124 Sep 17  2006 ./source/l/desktop-file-utils/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  7 23:58 ./source/l/djvulibre
--rw-r--r--   1 root root   2454400 Mar  6 17:46 ./source/l/djvulibre/djvulibre-3.5.24.tar.xz
--rwxr-xr-x   1 root root      4173 Apr  7 23:59 ./source/l/djvulibre/djvulibre.SlackBuild
--rw-r--r--   1 root root       257 Nov 28  2009 ./source/l/djvulibre/djvulibre.info
--rw-r--r--   1 root root       140 Nov 28  2009 ./source/l/djvulibre/doinst.sh.gz
--rw-r--r--   1 root root      1019 Aug  1  2008 ./source/l/djvulibre/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/ebook-tools
--rw-r--r--   1 root root     37866 Jan 29  2010 ./source/l/ebook-tools/ebook-tools-0.1.1.tar.bz2
--rwxr-xr-x   1 root root      3475 Mar 26  2010 ./source/l/ebook-tools/ebook-tools.SlackBuild
--rw-r--r--   1 root root       742 Mar 26  2010 ./source/l/ebook-tools/ebook-tools.paths.diff
--rw-r--r--   1 root root       781 May  4  2010 ./source/l/ebook-tools/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 28  2009 ./source/l/eigen2
--rw-r--r--   1 root root    327460 Nov 25  2009 ./source/l/eigen2/eigen2-2.0.10.tar.xz
--rwxr-xr-x   1 root root      2874 Dec 17  2009 ./source/l/eigen2/eigen2.SlackBuild
--rw-r--r--   1 root root       712 Nov 23  2008 ./source/l/eigen2/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  5  2009 ./source/l/enchant
--rw-r--r--   1 root root    359608 Dec  5  2009 ./source/l/enchant/enchant-1.5.0.tar.xz
--rwxr-xr-x   1 root root      3293 Dec 17  2009 ./source/l/enchant/enchant.SlackBuild
--rw-r--r--   1 root root       113 Dec  5  2009 ./source/l/enchant/enchant.info
--rw-r--r--   1 root root       802 Aug  1  2008 ./source/l/enchant/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/esound
--rw-r--r--   1 root root       262 Mar 23  2009 ./source/l/esound/doinst.sh.gz
--rw-r--r--   1 root root    396474 Mar 23  2009 ./source/l/esound/esound-0.2.41.tar.bz2
--rwxr-xr-x   1 root root      3634 Aug  6  2010 ./source/l/esound/esound.SlackBuild
--rw-r--r--   1 root root       962 Apr  2  2002 ./source/l/esound/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 14 19:12 ./source/l/exiv2
--rw-r--r--   1 root root   1551004 Feb 14 09:31 ./source/l/exiv2/exiv2-0.21.1.tar.xz
--rwxr-xr-x   1 root root      3602 Feb  9 06:00 ./source/l/exiv2/exiv2.SlackBuild
--rw-r--r--   1 root root       714 Aug  1  2008 ./source/l/exiv2/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 22:05 ./source/l/expat
--rw-r--r--   1 root root       824 Dec  9 21:51 ./source/l/expat/expat-2.0.1-fixes-3.patch.gz
--rw-r--r--   1 root root    446456 Jun  7  2007 ./source/l/expat/expat-2.0.1.tar.gz
--rwxr-xr-x   1 root root      2867 Feb  9 22:06 ./source/l/expat/expat.SlackBuild
--rw-r--r--   1 root root       720 Feb 11  2008 ./source/l/expat/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 17  2009 ./source/l/fftw
--rw-r--r--   1 root root   1937412 Jul 14  2009 ./source/l/fftw/fftw-3.2.2.tar.xz
--rwxr-xr-x   1 root root      3591 Dec 17  2009 ./source/l/fftw/fftw.SlackBuild
--rw-r--r--   1 root root       961 Sep 27  2009 ./source/l/fftw/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 23 23:39 ./source/l/freetype
--rw-r--r--   1 root root   1442053 Nov 28 15:54 ./source/l/freetype/freetype-2.4.4.tar.bz2
--rwxr-xr-x   1 root root      3929 Nov  5 00:17 ./source/l/freetype/freetype.SlackBuild
--rw-r--r--   1 root root       493 Jun  5  2004 ./source/l/freetype/freetype.illadvisederror.diff.gz
--rw-r--r--   1 root root       295 Apr 21  2007 ./source/l/freetype/freetype.subpixel.rendering.diff.gz
--rw-r--r--   1 root root       803 Jul 22  2006 ./source/l/freetype/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/fribidi
--rw-r--r--   1 root root    490862 Aug  9  2007 ./source/l/fribidi/fribidi-0.10.9.tar.bz2
--rwxr-xr-x   1 root root      2870 Aug  6  2010 ./source/l/fribidi/fribidi.SlackBuild
--rw-r--r--   1 root root       811 Apr  8  2008 ./source/l/fribidi/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 30 22:27 ./source/l/fuse
--rw-r--r--   1 root root       336 Dec  7  2007 ./source/l/fuse/doinst.sh.gz
--rw-r--r--   1 root root    346680 Sep 28  2010 ./source/l/fuse/fuse-2.8.5.tar.xz
--rwxr-xr-x   1 root root      4014 Jan 30 22:28 ./source/l/fuse/fuse.SlackBuild
--rw-r--r--   1 root root       846 Mar  8  2008 ./source/l/fuse/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 16 01:45 ./source/l/gamin
--rw-r--r--   1 root root       272 Mar 16 01:44 ./source/l/gamin/doinst.sh.gz
--rw-r--r--   1 root root    333504 Mar  9  2009 ./source/l/gamin/gamin-0.1.10.tar.xz
--rwxr-xr-x   1 root root      3694 Mar 16 01:45 ./source/l/gamin/gamin.SlackBuild
--rw-r--r--   1 root root       497 Mar 16 01:42 ./source/l/gamin/gaminrc.gz
--rw-r--r--   1 root root       753 Mar 16  2007 ./source/l/gamin/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12  2010 ./source/l/gd
--rw-r--r--   1 root root   1212730 Jun 21  2007 ./source/l/gd/gd-2.0.35.tar.bz2
--rwxr-xr-x   1 root root      3770 Feb 12  2010 ./source/l/gd/gd.SlackBuild
--rw-r--r--   1 root root      1088 Feb 12  2010 ./source/l/gd/gd.png14.diff.gz
--rw-r--r--   1 root root       366 Feb 18  2010 ./source/l/gd/gdlib.pc
--rw-r--r--   1 root root       922 Aug 16  2006 ./source/l/gd/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/gdbm
--rw-r--r--   1 root root    228695 Oct 16  2002 ./source/l/gdbm/gdbm-1.8.3.tar.gz
--rwxr-xr-x   1 root root      3614 Aug  6  2010 ./source/l/gdbm/gdbm.SlackBuild
--rw-r--r--   1 root root       641 Mar 23  2002 ./source/l/gdbm/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 10 14:27 ./source/l/gdk-pixbuf2
--rw-r--r--   1 root root        91 Nov 16 21:31 ./source/l/gdk-pixbuf2/doinst.sh.gz
--rw-r--r--   1 root root   1170284 Mar 30 18:40 ./source/l/gdk-pixbuf2/gdk-pixbuf-2.23.3.tar.xz
--rw-r--r--   1 root root       242 Oct  9  2010 ./source/l/gdk-pixbuf2/gdk-pixbuf.pnglz.diff.gz
--rwxr-xr-x   1 root root      4232 Mar 21 17:34 ./source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild
--rw-r--r--   1 root root      1000 Nov 14 18:49 ./source/l/gdk-pixbuf2/slack-desc
--rw-r--r--   1 root root      1744 Sep  8  2010 ./source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders
-drwxr-xr-x   2 root root      4096 Nov  8 02:02 ./source/l/gegl
--rw-r--r--   1 root root   2857496 Feb  7  2010 ./source/l/gegl/gegl-0.1.2.tar.xz
--rwxr-xr-x   1 root root      3428 Nov  8 02:03 ./source/l/gegl/gegl.SlackBuild
--rw-r--r--   1 root root       862 Oct  2  2008 ./source/l/gegl/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  6  2010 ./source/l/giflib
--rw-r--r--   1 root root    403232 Jul  1  2009 ./source/l/giflib/giflib-4.1.6.tar.xz
--rwxr-xr-x   1 root root      3450 Feb  6  2010 ./source/l/giflib/giflib.SlackBuild
--rw-r--r--   1 root root       776 Jul  1  2009 ./source/l/giflib/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/glib
--rw-r--r--   1 root root    346080 Mar 15  2001 ./source/l/glib/glib-1.2.10.tar.bz2
--rwxr-xr-x   1 root root      3807 Aug  6  2010 ./source/l/glib/glib.SlackBuild
--rw-r--r--   1 root root    110117 Dec  1  2006 ./source/l/glib/glib1.2_1.2.10-17.diff.bz2
--rw-r--r--   1 root root       757 Mar  8  2007 ./source/l/glib/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 22 17:06 ./source/l/glib2
--rw-r--r--   1 root root       489 Dec 15 02:36 ./source/l/glib2/doinst.sh.gz
--rw-r--r--   1 root root   4883344 Apr 14 06:28 ./source/l/glib2/glib-2.28.6.tar.xz
--rwxr-xr-x   1 root root      3740 Feb 11 14:23 ./source/l/glib2/glib2.SlackBuild
--rw-r--r--   1 root root       999 Mar 27 21:04 ./source/l/glib2/libglib2.csh
--rw-r--r--   1 root root       982 Mar 18  2008 ./source/l/glib2/libglib2.sh
--rw-r--r--   1 root root       691 Jan 11  2003 ./source/l/glib2/slack-desc
-drwxr-xr-x   4 root root      4096 Mar 24 07:32 ./source/l/glibc
--rw-r--r--   1 root root      7252 Feb  8 21:23 ./source/l/glibc/doinst.sh-glibc
--rw-r--r--   1 root root      4512 Feb  8 21:23 ./source/l/glibc/doinst.sh-glibc-solibs
--rw-r--r--   1 root root       736 Oct 12  2010 ./source/l/glibc/doinst.sh-glibc-zoneinfo
--rw-r--r--   1 root root       652 Jan  9  2009 ./source/l/glibc/glibc-2.10-dns-no-gethostbyname4.diff.gz
--rw-r--r--   1 root root  10262020 Feb  1 09:53 ./source/l/glibc/glibc-2.13.tar.xz
--rw-r--r--   1 root root        72 Feb  1 09:53 ./source/l/glibc/glibc-2.13.tar.xz.sig
--rwxr-xr-x   1 root root       174 Aug  9  2004 ./source/l/glibc/glibc-cvs-checkout.sh
--rwxr-xr-x   1 root root     16039 Mar 24 07:31 ./source/l/glibc/glibc.SlackBuild
--rw-r--r--   1 root root       333 Feb  9 01:36 ./source/l/glibc/glibc.disable.broken.optimized.memcpy.diff.gz
--rw-r--r--   1 root root       183 Oct 11  2006 ./source/l/glibc/glibc.getcwd.max.macro.diff.gz
--rw-r--r--   1 root root     11654 Jan  6 17:20 ./source/l/glibc/glibc.git-4a531bb0b3b582cb693de9f76d2d97d970f9a5d5.patch.gz
--rw-r--r--   1 root root       558 Jan  6 02:45 ./source/l/glibc/glibc.git-96611391ad8823ba58405325d78cefeae5cdf699-CVE-2010-3847b.patch.gz
--rw-r--r--   1 root root       722 Mar 24 07:29 ./source/l/glibc/glibc.ldd.trace.through.dynamic.linker.diff.gz
--rw-r--r--   1 root root       304 Aug  4  2004 ./source/l/glibc/glibc.locale.no-archive.diff.gz
--rw-r--r--   1 root root       558 Oct 19  2010 ./source/l/glibc/glibc.make-3.82.diff.gz
--rw-r--r--   1 root root       325 Oct 11  2006 ./source/l/glibc/glibc.nis-netgroups.diff.gz
--rw-r--r--   1 root root       246 Feb 24  2009 ./source/l/glibc/glibc.revert.to.fix.build.breakages.diff.gz
--rw-r--r--   1 root root       213 Aug 22  2006 ./source/l/glibc/glibc.ru_RU.CP1251.diff.gz
--rw-r--r--   1 root root       254 Oct 31  2007 ./source/l/glibc/is_IS.diff.gz
-drwxr-xr-x   2 root root      4096 Sep 14  2006 ./source/l/glibc/profile.d
--rwxr-xr-x   1 root root       328 Mar 27 21:19 ./source/l/glibc/profile.d/glibc.csh.new
--rwxr-xr-x   1 root root       325 Sep 14  2006 ./source/l/glibc/profile.d/glibc.sh.new
--rw-r--r--   1 root root       845 Oct 11  2002 ./source/l/glibc/slack-desc.glibc
--rw-r--r--   1 root root      1139 Oct 12  2002 ./source/l/glibc/slack-desc.glibc-debug
--rw-r--r--   1 root root       794 May  1  2002 ./source/l/glibc/slack-desc.glibc-i18n
--rw-r--r--   1 root root       972 Nov 18  2005 ./source/l/glibc/slack-desc.glibc-profile
--rw-r--r--   1 root root       786 Mar 23  2002 ./source/l/glibc/slack-desc.glibc-solibs
--rw-r--r--   1 root root      1227 Nov 23  2006 ./source/l/glibc/slack-desc.glibc-solibs-linuxthreads
--rw-r--r--   1 root root       965 Apr 30  2007 ./source/l/glibc/slack-desc.glibc-zoneinfo
-drwxr-xr-x   3 root root      4096 Feb 25  2009 ./source/l/glibc/timezone-scripts
--rw-r--r--   1 root root      2106 Dec  4  2006 ./source/l/glibc/timezone-scripts/output-updated-timeconfig.sh
-drwxr-xr-x   2 root root      4096 Dec  3  2006 ./source/l/glibc/timezone-scripts/parts
--rw-r--r--   1 root root      4398 Mar 10  2008 ./source/l/glibc/timezone-scripts/parts/00
--rw-r--r--   1 root root     44857 Sep 18  2007 ./source/l/glibc/timezone-scripts/parts/01
--rw-r--r--   1 root root       443 Dec  3  2006 ./source/l/glibc/timezone-scripts/parts/02
--rw-r--r--   1 root root     31601 Sep 18  2007 ./source/l/glibc/timezone-scripts/parts/03
--rw-r--r--   1 root root       857 Dec  3  2006 ./source/l/glibc/timezone-scripts/parts/04
--rw-r--r--   1 root root        87 Dec  3  2006 ./source/l/glibc/timezone-scripts/parts/README
--rw-r--r--   1 root root        66 Feb 16  2003 ./source/l/glibc/timezone-scripts/setup.timeconfig
--rw-r--r--   1 root root     84202 Feb 25  2009 ./source/l/glibc/timezone-scripts/timeconfig
--rw-r--r--   1 root root    193553 Mar 14 13:18 ./source/l/glibc/tzcode2011d.tar.gz
--rw-r--r--   1 root root    194588 Mar 14 13:18 ./source/l/glibc/tzdata2011d.tar.gz
-drwxr-xr-x   2 root root      4096 Feb  3  2010 ./source/l/gmime
--rw-r--r--   1 root root    719516 Feb  2  2010 ./source/l/gmime/gmime-2.4.15.tar.xz
--rwxr-xr-x   1 root root      3655 Feb  4  2010 ./source/l/gmime/gmime.SlackBuild
--rw-r--r--   1 root root       753 Mar 14  2007 ./source/l/gmime/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/gmm
--rw-r--r--   1 root root    333173 Sep  9  2008 ./source/l/gmm/gmm-3.1.tar.bz2
--rwxr-xr-x   1 root root      2111 May 19  2009 ./source/l/gmm/gmm.SlackBuild
--rw-r--r--   1 root root       117 Jul 25  2008 ./source/l/gmm/gmm.info
--rw-r--r--   1 root root      1035 Aug  1  2008 ./source/l/gmm/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 24  2010 ./source/l/gmp
--rw-r--r--   1 root root   1656884 Feb  6  2010 ./source/l/gmp/gmp-5.0.1.tar.xz
--rwxr-xr-x   1 root root      3225 Feb 24  2010 ./source/l/gmp/gmp.SlackBuild
--rw-r--r--   1 root root       766 Jun 24  2003 ./source/l/gmp/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  6 19:00 ./source/l/gnome-icon-theme
--rw-r--r--   1 root root       138 Jul 14  2009 ./source/l/gnome-icon-theme/doinst.sh.gz
--rw-r--r--   1 root root  12469028 Aug  5  2010 ./source/l/gnome-icon-theme/gnome-icon-theme-2.31.0.tar.xz
--rwxr-xr-x   1 root root      3094 Nov  6 18:55 ./source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild
--rw-r--r--   1 root root       384 Nov  6 19:00 ./source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff.gz
--rw-r--r--   1 root root       766 Feb 11  2008 ./source/l/gnome-icon-theme/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 23 21:59 ./source/l/gst-plugins-base
--rw-r--r--   1 root root   2127100 Jan 21 10:45 ./source/l/gst-plugins-base/gst-plugins-base-0.10.32.tar.xz
--rwxr-xr-x   1 root root      3696 Feb 11  2010 ./source/l/gst-plugins-base/gst-plugins-base.SlackBuild
--rw-r--r--   1 root root      1067 Aug  1  2008 ./source/l/gst-plugins-base/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 16 03:19 ./source/l/gst-plugins-good
--rw-r--r--   1 root root   2488032 Mar  8 17:45 ./source/l/gst-plugins-good/gst-plugins-good-0.10.28.tar.xz
--rw-r--r--   1 root root       331 Apr 16 03:19 ./source/l/gst-plugins-good/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff.gz
--rwxr-xr-x   1 root root      4058 Apr 16 03:20 ./source/l/gst-plugins-good/gst-plugins-good.SlackBuild
--rw-r--r--   1 root root       902 Nov  3  2009 ./source/l/gst-plugins-good/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 23 21:36 ./source/l/gstreamer
--rw-r--r--   1 root root   2859392 Jan 21 10:14 ./source/l/gstreamer/gstreamer-0.10.32.tar.xz
--rwxr-xr-x   1 root root      4042 Feb 11  2010 ./source/l/gstreamer/gstreamer.SlackBuild
--rw-r--r--   1 root root      1060 Aug  1  2008 ./source/l/gstreamer/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/gtk+
--rw-r--r--   1 root root   2248773 Apr  2  2001 ./source/l/gtk+/gtk+-1.2.10.tar.bz2
--rwxr-xr-x   1 root root      3984 Jan 23 07:31 ./source/l/gtk+/gtk+.SlackBuild
--rw-r--r--   1 root root    159953 Oct  6  2005 ./source/l/gtk+/gtk+1.2_1.2.10-18.diff.bz2
--rw-r--r--   1 root root       806 Mar  8  2007 ./source/l/gtk+/slack-desc
-drwxr-xr-x   3 root root      4096 Apr  2 17:21 ./source/l/gtk+2
--rw-r--r--   1 root root       505 Dec  4 23:22 ./source/l/gtk+2/doinst.sh.gz
--rw-r--r--   1 root root       359 Feb 11 16:42 ./source/l/gtk+2/fix_build_issues_on_tutorial_and_faq.diff.gz
--rw-r--r--   1 root root  11736120 Apr  2 00:35 ./source/l/gtk+2/gtk+-2.24.4.tar.xz
--rw-r--r--   1 root root      2047 Apr  2 17:20 ./source/l/gtk+2/gtk+-2.24.x.icon-compat.am.diff.gz
--rw-r--r--   1 root root      1923 Apr  2 17:21 ./source/l/gtk+2/gtk+-2.24.x.icon-compat.diff.gz
--rwxr-xr-x   1 root root      6816 Feb 24 21:25 ./source/l/gtk+2/gtk+2.SlackBuild
--rw-r--r--   1 root root       293 Feb  8  2010 ./source/l/gtk+2/gtk.xid.nowarningflood.diff.gz
-drwxr-xr-x   2 root root      4096 Jan 11  2003 ./source/l/gtk+2/profile.d
--rwxr-xr-x   1 root root        32 Dec  9 19:12 ./source/l/gtk+2/profile.d/gtk+.csh
--rwxr-xr-x   1 root root        44 Dec  9 19:13 ./source/l/gtk+2/profile.d/gtk+.sh
--rw-r--r--   1 root root       791 Feb 11  2008 ./source/l/gtk+2/slack-desc
--rw-r--r--   1 root root       339 Feb 24 20:40 ./source/l/gtk+2/update-gtk-immodules
--rw-r--r--   1 root root      2412 Aug 11  2009 ./source/l/gtk+2/update-gtk-immodules-2.0
--rw-r--r--   1 root root       475 Feb 11 14:54 ./source/l/gtk+2/use_host_triplet_for_gtk_immodules.diff.gz
-drwxr-xr-x   2 root root      4096 Aug  6  2010 ./source/l/gtkspell
--rw-r--r--   1 root root    241976 Oct 23  2009 ./source/l/gtkspell/gtkspell-2.0.16.tar.xz
--rwxr-xr-x   1 root root      3589 Aug  6  2010 ./source/l/gtkspell/gtkspell.SlackBuild
--rw-r--r--   1 root root       789 Sep 18  2008 ./source/l/gtkspell/slack-desc
-drwxr-xr-x   3 root root      4096 Jul 14  2010 ./source/l/hal
-drwxr-xr-x   3 root root      4096 Dec 31  2009 ./source/l/hal-info
--rw-r--r--   1 root root    108915 Dec  1  2009 ./source/l/hal-info/hal-info-20091130.tar.bz2
--rwxr-xr-x   1 root root      2273 Feb  9  2010 ./source/l/hal-info/hal-info.SlackBuild
-drwxr-xr-x   2 root root      4096 Dec 31  2009 ./source/l/hal-info/patches
--rw-r--r--   1 root root       952 Dec 31  2009 ./source/l/hal-info/patches/quirk-LG_X110-keyboard.patch.gz
--rw-r--r--   1 root root       603 Dec 31  2009 ./source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch.gz
--rw-r--r--   1 root root       757 Apr 14  2009 ./source/l/hal-info/slack-desc
--rw-r--r--   1 root root       346 Jul 15  2009 ./source/l/hal/doinst.sh.gz
--rw-r--r--   1 root root    762460 Nov 30  2009 ./source/l/hal/hal-0.5.14.tar.xz
--rwxr-xr-x   1 root root      6160 Nov  8 03:00 ./source/l/hal/hal.SlackBuild
--rw-r--r--   1 root root       643 Sep  9  2009 ./source/l/hal/hal.conf.gz
-drwxr-xr-x   2 root root      4096 Nov  8 02:57 ./source/l/hal/patches
--rw-r--r--   1 root root      1338 Dec 12  2009 ./source/l/hal/patches/10-keymap.fdi-restore_zap.diff.gz
--rw-r--r--   1 root root       460 Nov  8 02:55 ./source/l/hal/patches/fix-build-with-automake-1.11.1.patch.gz
--rw-r--r--   1 root root       602 Nov  8 02:57 ./source/l/hal/patches/fix-hal-segfault.patch.gz
--rw-r--r--   1 root root       679 Mar  4  2010 ./source/l/hal/patches/fix_ioperm_arguments.patch.gz
--rw-r--r--   1 root root       970 Dec 12  2009 ./source/l/hal/patches/fix_libusb_detection.diff.gz
--rw-r--r--   1 root root      1274 Mar  4  2010 ./source/l/hal/patches/fix_segfault-dbus_error_init.patch.gz
--rw-r--r--   1 root root      1037 Dec 31  2009 ./source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz
--rw-r--r--   1 root root      1009 Jan 20  2010 ./source/l/hal/patches/handle_input.touchpad_explicitly.diff.gz
--rw-r--r--   1 root root       909 Nov  8 02:55 ./source/l/hal/patches/ignore_internal_dm_devices.diff.gz
--rw-r--r--   1 root root       641 Jan  9  2010 ./source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff.gz
--rw-r--r--   1 root root       438 Sep  9  2009 ./source/l/hal/rc.hald.gz
--rw-r--r--   1 root root       918 Jul 15  2009 ./source/l/hal/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 27  2010 ./source/l/hicolor-icon-theme
--rw-r--r--   1 root root       542 Mar 18  2008 ./source/l/hicolor-icon-theme/doinst.sh.gz
--rw-r--r--   1 root root     38008 Jan 13  2010 ./source/l/hicolor-icon-theme/hicolor-icon-theme-0.12.tar.gz
--rwxr-xr-x   1 root root      2277 Apr 30  2010 ./source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild
--rw-r--r--   1 root root       522 Mar 18  2008 ./source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache
--rw-r--r--   1 root root       914 Aug 11  2006 ./source/l/hicolor-icon-theme/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/hunspell
--rw-r--r--   1 root root    505780 Mar  3  2010 ./source/l/hunspell/hunspell-1.2.9.tar.xz
--rwxr-xr-x   1 root root      3525 Mar 26  2010 ./source/l/hunspell/hunspell.SlackBuild
--rw-r--r--   1 root root       964 Mar 21  2010 ./source/l/hunspell/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  5  2009 ./source/l/icon-naming-utils
--rw-r--r--   1 root root     70352 Feb 21  2009 ./source/l/icon-naming-utils/icon-naming-utils-0.8.90.tar.gz
--rwxr-xr-x   1 root root      2613 Aug  6  2010 ./source/l/icon-naming-utils/icon-naming-utils.SlackBuild
--rw-r--r--   1 root root       219 Mar  5  2009 ./source/l/icon-naming-utils/icon-naming-utils.pkgconfigdir.diff.gz
--rw-r--r--   1 root root       917 Mar  5  2009 ./source/l/icon-naming-utils/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/ilmbase
--rw-r--r--   1 root root    286616 Jul 23  2010 ./source/l/ilmbase/ilmbase-1.0.2.tar.xz
--rwxr-xr-x   1 root root      3154 Aug  9  2010 ./source/l/ilmbase/ilmbase.SlackBuild
--rw-r--r--   1 root root       171 Aug  9  2010 ./source/l/ilmbase/ilmbase.gcc4.diff.gz
--rw-r--r--   1 root root       162 Apr 29  2008 ./source/l/ilmbase/ilmbase.info
--rw-r--r--   1 root root       829 Aug  1  2008 ./source/l/ilmbase/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 11  2010 ./source/l/imlib
--rw-r--r--   1 root root    605220 Sep 24  2004 ./source/l/imlib/imlib-1.9.15.tar.xz
--rwxr-xr-x   1 root root      3193 Jun 24  2010 ./source/l/imlib/imlib.SlackBuild
--rw-r--r--   1 root root       799 Apr 28  2008 ./source/l/imlib/imlib.mitshm.render.diff.gz
--rw-r--r--   1 root root       857 Feb 11  2008 ./source/l/imlib/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  7 17:15 ./source/l/iso-codes
--rw-r--r--   1 root root   6218585 Mar  1 09:42 ./source/l/iso-codes/iso-codes-3.24.2.tar.bz2
--rw-r--r--   1 root root       543 Mar  1 09:42 ./source/l/iso-codes/iso-codes-3.24.2.tar.bz2.sig
--rwxr-xr-x   1 root root      2449 Mar  7 17:16 ./source/l/iso-codes/iso-codes.SlackBuild
--rw-r--r--   1 root root       212 Nov 14  2008 ./source/l/iso-codes/iso-codes.info
--rw-r--r--   1 root root       471 Nov 14  2008 ./source/l/iso-codes/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/jasper
--rw-r--r--   1 root root    958519 Apr  3  2009 ./source/l/jasper/jasper-1.900.1.tar.bz2
--rwxr-xr-x   1 root root      3513 Feb 11  2010 ./source/l/jasper/jasper.SlackBuild
--rw-r--r--   1 root root       839 Sep 16  2007 ./source/l/jasper/slack-desc
-lrwxrwxrwx   1 root root        12 Aug 22  2010 ./source/l/jre -> ../local/jre
-drwxr-xr-x   2 root root      4096 Feb 20  2010 ./source/l/lcms
--rw-r--r--   1 root root    608880 Oct 30  2009 ./source/l/lcms/lcms-1.19.tar.xz
--rwxr-xr-x   1 root root      3261 Feb 20  2010 ./source/l/lcms/lcms.SlackBuild
--rw-r--r--   1 root root       665 Feb 22  2004 ./source/l/lcms/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 19  2010 ./source/l/lesstif
--rw-r--r--   1 root root       210 Feb  7  2007 ./source/l/lesstif/doinst.sh.gz
--rw-r--r--   1 root root   1821464 May 27  2009 ./source/l/lesstif/lesstif-0.95.2.tar.xz
--rw-r--r--   1 root root       507 Oct 21  2008 ./source/l/lesstif/lesstif.Makefile.in.patch.gz
--rw-r--r--   1 root root       737 Oct 21  2008 ./source/l/lesstif/lesstif.PutPixel32.patch.gz
--rwxr-xr-x   1 root root      4824 Apr 19  2010 ./source/l/lesstif/lesstif.SlackBuild
--rw-r--r--   1 root root       267 Mar 23  2009 ./source/l/lesstif/lesstif.rendertable.check.diff.gz
--rw-r--r--   1 root root       588 Oct 17  2008 ./source/l/lesstif/lesstif.x86_64.patch.gz
--rw-r--r--   1 root root       984 Mar 23  2002 ./source/l/lesstif/slack-desc
-drwxr-xr-x   2 root root      4096 May 11  2010 ./source/l/libaio
--rw-r--r--   1 root root     43579 Oct  9  2009 ./source/l/libaio/libaio-0.3.109.tar.bz2
--rw-r--r--   1 root root       248 Oct  9  2009 ./source/l/libaio/libaio-0.3.109.tar.sign
--rwxr-xr-x   1 root root      3782 May 11  2010 ./source/l/libaio/libaio.SlackBuild
--rw-r--r--   1 root root       962 Apr 10  2008 ./source/l/libaio/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  9 20:11 ./source/l/libao
--rw-r--r--   1 root root    397102 Feb 22 23:00 ./source/l/libao/libao-1.1.0.tar.gz
--rwxr-xr-x   1 root root      2737 Mar  9 20:12 ./source/l/libao/libao.SlackBuild
--rw-r--r--   1 root root       884 Dec 19  2003 ./source/l/libao/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  3 19:33 ./source/l/libarchive
--rw-r--r--   1 root root    999068 Jun 30  2010 ./source/l/libarchive/libarchive-2.8.4.tar.xz
--rwxr-xr-x   1 root root      3245 Mar  6  2010 ./source/l/libarchive/libarchive.SlackBuild
--rw-r--r--   1 root root       145 Jul 24  2008 ./source/l/libarchive/libarchive.info
--rw-r--r--   1 root root       872 Mar  7  2009 ./source/l/libarchive/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  6  2010 ./source/l/libart_lgpl
--rw-r--r--   1 root root    278396 Apr  1  2010 ./source/l/libart_lgpl/libart_lgpl-2.3.21.tar.xz
--rwxr-xr-x   1 root root      2898 Aug  6  2010 ./source/l/libart_lgpl/libart_lgpl.SlackBuild
--rw-r--r--   1 root root       823 May  4  2007 ./source/l/libart_lgpl/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  6  2010 ./source/l/libcaca
--rw-r--r--   1 root root    750005 Oct 18  2008 ./source/l/libcaca/libcaca-0.99.beta16.tar.bz2
--rwxr-xr-x   1 root root      3706 Aug  6  2010 ./source/l/libcaca/libcaca.SlackBuild
--rw-r--r--   1 root root       817 Apr 20  2004 ./source/l/libcaca/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  8 20:26 ./source/l/libcap
--rw-r--r--   1 root root       553 Oct 30  2008 ./source/l/libcap/README.SLACKWARE
--rw-r--r--   1 root root     11907 Mar 29  2008 ./source/l/libcap/capfaq-0.2.txt
--rw-r--r--   1 root root       249 Jan 19 05:10 ./source/l/libcap/libcap-2.20.tar.sign
--rw-r--r--   1 root root     51404 Jan 19 05:10 ./source/l/libcap/libcap-2.20.tar.xz
--rwxr-xr-x   1 root root      3761 Feb  8 20:26 ./source/l/libcap/libcap.SlackBuild
--rw-r--r--   1 root root       247 Feb  8 20:24 ./source/l/libcap/libcap.capability.h.fix.broken.includes.diff.gz
--rw-r--r--   1 root root       837 Oct 30  2008 ./source/l/libcap/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  6  2010 ./source/l/libcddb
--rw-r--r--   1 root root    295676 Apr  6  2009 ./source/l/libcddb/libcddb-1.3.2.tar.xz
--rwxr-xr-x   1 root root      3871 Aug  6  2010 ./source/l/libcddb/libcddb.SlackBuild
--rw-r--r--   1 root root       786 Mar 10  2008 ./source/l/libcddb/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/l/libcdio
--rw-r--r--   1 root root   1308090 Oct 27  2007 ./source/l/libcdio/libcdio-0.79.tar.bz2
--rwxr-xr-x   1 root root      3300 Mar 11  2010 ./source/l/libcdio/libcdio.SlackBuild
--rw-r--r--   1 root root      1012 Mar 10  2008 ./source/l/libcdio/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 20 17:53 ./source/l/libdbusmenu-qt
--rw-r--r--   1 root root     31720 Nov 20 17:53 ./source/l/libdbusmenu-qt/libdbusmenu-qt-0.6.4.tar.xz
--rwxr-xr-x   1 root root      3286 Nov 20 17:55 ./source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild
--rw-r--r--   1 root root       923 Sep  3  2010 ./source/l/libdbusmenu-qt/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/libdiscid
--rw-r--r--   1 root root    347907 Aug  6  2008 ./source/l/libdiscid/libdiscid-0.2.2.tar.gz
--rwxr-xr-x   1 root root      3431 Apr 30  2010 ./source/l/libdiscid/libdiscid.SlackBuild
--rw-r--r--   1 root root       940 May  4  2010 ./source/l/libdiscid/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libdvdread
--rw-r--r--   1 root root     96899 Sep  7  2008 ./source/l/libdvdread/libdvdread-4.1.3.tar.bz2
--rwxr-xr-x   1 root root      3145 Aug  6  2010 ./source/l/libdvdread/libdvdread.SlackBuild
--rw-r--r--   1 root root       858 Mar  8  2009 ./source/l/libdvdread/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 27 04:23 ./source/l/libelf
--rw-r--r--   1 root root    112852 Oct 18  2010 ./source/l/libelf/libelf-0.8.13.tar.xz
--rwxr-xr-x   1 root root      3954 Mar 27 04:24 ./source/l/libelf/libelf.SlackBuild
--rw-r--r--   1 root root       902 Oct 18  2010 ./source/l/libelf/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9 07:00 ./source/l/libexif
--rw-r--r--   1 root root    998720 Dec 16 06:26 ./source/l/libexif/libexif-0.6.20.tar.xz
--rwxr-xr-x   1 root root      3344 Feb  9 07:00 ./source/l/libexif/libexif.SlackBuild
--rw-r--r--   1 root root       197 Feb  9 07:02 ./source/l/libexif/libexif.pc.diff.gz
--rw-r--r--   1 root root       855 Feb 11  2008 ./source/l/libexif/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libglade
--rw-r--r--   1 root root    356119 Mar 23  2009 ./source/l/libglade/libglade-2.6.4.tar.bz2
--rwxr-xr-x   1 root root      3575 Apr 25  2010 ./source/l/libglade/libglade.SlackBuild
--rw-r--r--   1 root root       808 Feb 11  2008 ./source/l/libglade/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 27 08:44 ./source/l/libgphoto2
--rw-r--r--   1 root root   4570956 Aug 23  2010 ./source/l/libgphoto2/libgphoto2-2.4.10.1.tar.xz
--rwxr-xr-x   1 root root      5431 Dec 27 08:39 ./source/l/libgphoto2/libgphoto2.SlackBuild
--rw-r--r--   1 root root       749 Apr 27  2008 ./source/l/libgphoto2/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 16 17:25 ./source/l/libgpod
--rw-r--r--   1 root root       269 Jan 16 17:25 ./source/l/libgpod/doinst.sh.gz
--rw-r--r--   1 root root    651224 Oct 12  2010 ./source/l/libgpod/libgpod-0.8.0.tar.xz
--rwxr-xr-x   1 root root      4318 Jan 16 17:25 ./source/l/libgpod/libgpod.SlackBuild
--rw-r--r--   1 root root       976 Sep  6  2006 ./source/l/libgpod/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  4 04:23 ./source/l/libgsf
--rw-r--r--   1 root root    509172 Mar 25 03:17 ./source/l/libgsf/libgsf-1.14.20.tar.xz
--rwxr-xr-x   1 root root      3974 Apr  4 04:24 ./source/l/libgsf/libgsf.SlackBuild
--rw-r--r--   1 root root       793 Apr 15  2006 ./source/l/libgsf/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  6  2010 ./source/l/libical
--rw-r--r--   1 root root       438 Nov  2  2008 ./source/l/libical/README
--rw-r--r--   1 root root    612212 Sep 27  2009 ./source/l/libical/libical-0.44.tar.xz
--rwxr-xr-x   1 root root      3538 Aug  6  2010 ./source/l/libical/libical.SlackBuild
--rw-r--r--   1 root root       272 Nov  2  2008 ./source/l/libical/libical.info
--rw-r--r--   1 root root       923 Oct 28  2008 ./source/l/libical/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libid3tag
--rw-r--r--   1 root root       222 Mar 23  2009 ./source/l/libid3tag/id3tag.pc
--rw-r--r--   1 root root    338143 Feb 17  2004 ./source/l/libid3tag/libid3tag-0.15.1b.tar.gz
--rw-r--r--   1 root root       189 Feb 18  2004 ./source/l/libid3tag/libid3tag-0.15.1b.tar.gz.sign
--rwxr-xr-x   1 root root      3890 Feb  8 20:57 ./source/l/libid3tag/libid3tag.SlackBuild
--rw-r--r--   1 root root       778 Sep 10  2003 ./source/l/libid3tag/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  7  2010 ./source/l/libidl
--rw-r--r--   1 root root    359144 Mar 30  2010 ./source/l/libidl/libIDL-0.8.14.tar.xz
--rwxr-xr-x   1 root root      3306 Aug  7  2010 ./source/l/libidl/libidl.SlackBuild
--rw-r--r--   1 root root       795 Feb 11  2008 ./source/l/libidl/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  7  2010 ./source/l/libidn
--rw-r--r--   1 root root   2114904 May 22  2010 ./source/l/libidn/libidn-1.19.tar.xz
--rwxr-xr-x   1 root root      3788 Aug  7  2010 ./source/l/libidn/libidn.SlackBuild
--rw-r--r--   1 root root       793 Oct 14  2004 ./source/l/libidn/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libieee1284
--rw-r--r--   1 root root    278804 Sep 18  2007 ./source/l/libieee1284/libieee1284-0.2.11.tar.bz2
--rwxr-xr-x   1 root root      3896 Aug  7  2010 ./source/l/libieee1284/libieee1284.SlackBuild
--rw-r--r--   1 root root       842 Feb 11  2008 ./source/l/libieee1284/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/libiodbc
--rw-r--r--   1 root root    658548 Dec 24  2009 ./source/l/libiodbc/libiodbc-3.52.7.tar.xz
--rwxr-xr-x   1 root root      3649 May  4  2010 ./source/l/libiodbc/libiodbc.SlackBuild
--rw-r--r--   1 root root       896 Dec 24  2009 ./source/l/libiodbc/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  5  2010 ./source/l/libjpeg
--rw-r--r--   1 root root    648772 Feb 28  2010 ./source/l/libjpeg/jpegsrc.v8a.tar.xz
--rwxr-xr-x   1 root root      3238 Apr  5  2010 ./source/l/libjpeg/libjpeg.SlackBuild
--rw-r--r--   1 root root      1120 Mar 23  2002 ./source/l/libjpeg/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  7  2009 ./source/l/libkarma
--rw-r--r--   1 root root     81330 Jun  6  2009 ./source/l/libkarma/libkarma-0.1.1.tar.gz
--rwxr-xr-x   1 root root      3928 Dec  4 19:32 ./source/l/libkarma/libkarma.SlackBuild
--rw-r--r--   1 root root       816 Feb 15  2007 ./source/l/libkarma/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 15 19:18 ./source/l/liblastfm
--rw-r--r--   1 root root     92156 Jan 15 19:18 ./source/l/liblastfm/liblastfm-0.3.3_f0b3239.tar.xz
--rwxr-xr-x   1 root root      2848 Jan 15 19:19 ./source/l/liblastfm/liblastfm.SlackBuild
--rw-r--r--   1 root root       663 Oct  7  2009 ./source/l/liblastfm/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libmad
--rw-r--r--   1 root root    502379 Feb 17  2004 ./source/l/libmad/libmad-0.15.1b.tar.gz
--rw-r--r--   1 root root       189 Feb 18  2004 ./source/l/libmad/libmad-0.15.1b.tar.gz.sign
--rwxr-xr-x   1 root root      3805 Aug  8  2010 ./source/l/libmad/libmad.SlackBuild
--rw-r--r--   1 root root       207 Feb 19  2008 ./source/l/libmad/mad.pc
--rw-r--r--   1 root root      1055 Sep 10  2003 ./source/l/libmad/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libmcrypt
--rw-r--r--   1 root root    875425 Feb 19  2007 ./source/l/libmcrypt/libmcrypt-2.5.8.tar.bz2
--rwxr-xr-x   1 root root      3986 Aug  8  2010 ./source/l/libmcrypt/libmcrypt.SlackBuild
--rw-r--r--   1 root root       634 Apr  4  2009 ./source/l/libmcrypt/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/libmcs
--rw-r--r--   1 root root     96126 Jul 14  2010 ./source/l/libmcs/libmcs-0.7.2.tar.bz2
--rwxr-xr-x   1 root root      3696 Aug  9  2010 ./source/l/libmcs/libmcs.SlackBuild
--rw-r--r--   1 root root       966 Feb 27  2008 ./source/l/libmcs/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 14  2010 ./source/l/libmng
--rw-r--r--   1 root root    737812 Jul 13  2007 ./source/l/libmng/libmng-1.0.10.tar.xz
--rwxr-xr-x   1 root root      3759 Feb 14  2010 ./source/l/libmng/libmng.SlackBuild
--rw-r--r--   1 root root       941 Aug  4  2003 ./source/l/libmng/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/libmowgli
--rw-r--r--   1 root root    104972 Jul 14  2010 ./source/l/libmowgli/libmowgli-0.7.1.tar.bz2
--rwxr-xr-x   1 root root      3854 Aug  9  2010 ./source/l/libmowgli/libmowgli.SlackBuild
--rw-r--r--   1 root root       859 Jan 30  2008 ./source/l/libmowgli/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  4  2010 ./source/l/libmpc
--rwxr-xr-x   1 root root      3489 Feb  8 17:36 ./source/l/libmpc/libmpc.SlackBuild
--rw-r--r--   1 root root    376072 May 14  2010 ./source/l/libmpc/mpc-0.8.2.tar.xz
--rw-r--r--   1 root root       833 Aug  4  2010 ./source/l/libmpc/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/libmsn
--rw-r--r--   1 root root    289614 Mar 24  2010 ./source/l/libmsn/libmsn-4.1.tar.bz2
--rwxr-xr-x   1 root root      2927 Mar 24  2010 ./source/l/libmsn/libmsn.SlackBuild
--rw-r--r--   1 root root       771 May  4  2010 ./source/l/libmsn/slack-desc
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/l/libmtp
--rw-r--r--   1 root root    408544 Sep 12  2009 ./source/l/libmtp/libmtp-1.0.1.tar.xz
--rwxr-xr-x   1 root root      4318 May  3  2010 ./source/l/libmtp/libmtp.SlackBuild
--rw-r--r--   1 root root      1059 May  3  2010 ./source/l/libmtp/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/l/libnjb
--rw-r--r--   1 root root      1674 Oct 26  2007 ./source/l/libnjb/80-libnjb.rules
--rw-r--r--   1 root root    404914 Sep  5  2007 ./source/l/libnjb/libnjb-2.2.6.tar.bz2
--rwxr-xr-x   1 root root      4300 Aug  9  2010 ./source/l/libnjb/libnjb.SlackBuild
--rw-r--r--   1 root root       997 Sep  7  2006 ./source/l/libnjb/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libnl
--rw-r--r--   1 root root    217408 Jun  8  2008 ./source/l/libnl/libnl-1.1.tar.bz2
--rw-r--r--   1 root root       237 Feb 23  2009 ./source/l/libnl/libnl-include_limits.h.patch.gz
--rwxr-xr-x   1 root root      3202 Aug  9  2010 ./source/l/libnl/libnl.SlackBuild
--rw-r--r--   1 root root       112 Feb 23  2009 ./source/l/libnl/libnl.info
--rw-r--r--   1 root root       786 Jun  8  2008 ./source/l/libnl/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 17 22:24 ./source/l/libnotify
--rw-r--r--   1 root root    310439 Oct 15  2010 ./source/l/libnotify/libnotify-0.5.2.tar.bz2
--rwxr-xr-x   1 root root      2738 Nov 17 22:30 ./source/l/libnotify/libnotify.SlackBuild
--rw-r--r--   1 root root       707 May 31  2009 ./source/l/libnotify/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  9 20:13 ./source/l/libogg
--rw-r--r--   1 root root    281444 Dec  7 10:46 ./source/l/libogg/libogg-1.2.2.tar.xz
--rwxr-xr-x   1 root root      2841 Feb  6  2010 ./source/l/libogg/libogg.SlackBuild
--rw-r--r--   1 root root       762 Dec 19  2003 ./source/l/libogg/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  9 20:19 ./source/l/liboggz
--rw-r--r--   1 root root    420788 Apr 29  2010 ./source/l/liboggz/liboggz-1.1.1.tar.xz
--rwxr-xr-x   1 root root      3352 Mar  9 20:23 ./source/l/liboggz/liboggz.SlackBuild
--rw-r--r--   1 root root      1038 Mar  9 20:18 ./source/l/liboggz/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/liboil
--rw-r--r--   1 root root    499068 Feb  4  2010 ./source/l/liboil/liboil-0.3.17.tar.xz
--rwxr-xr-x   1 root root      3252 Aug  9  2010 ./source/l/liboil/liboil.SlackBuild
--rw-r--r--   1 root root      1033 Aug  1  2008 ./source/l/liboil/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  5  2010 ./source/l/libpcap
--rw-r--r--   1 root root    581984 Apr  6  2010 ./source/l/libpcap/libpcap-1.1.1.tar.gz
--rw-r--r--   1 root root        72 Apr  6  2010 ./source/l/libpcap/libpcap-1.1.1.tar.gz.sig
--rwxr-xr-x   1 root root      4131 Aug  5  2010 ./source/l/libpcap/libpcap.SlackBuild
--rw-r--r--   1 root root       908 Aug  5  2010 ./source/l/libpcap/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 15 19:30 ./source/l/libplist
--rw-r--r--   1 root root     67642 Apr 18  2010 ./source/l/libplist/libplist-1.3.tar.bz2
--rwxr-xr-x   1 root root      3592 Jan 15 19:55 ./source/l/libplist/libplist.SlackBuild
--rw-r--r--   1 root root       796 Jan 15 19:44 ./source/l/libplist/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 30 17:52 ./source/l/libpng
--rw-r--r--   1 root root    540480 Jun 26  2010 ./source/l/libpng/libpng-1.2.44.tar.xz
--rw-r--r--   1 root root    545672 Dec  9 13:48 ./source/l/libpng/libpng-1.4.5.tar.xz
--rwxr-xr-x   1 root root      4389 Jan 30 17:52 ./source/l/libpng/libpng.SlackBuild
--rw-r--r--   1 root root       949 Mar 23  2002 ./source/l/libpng/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 17 18:38 ./source/l/libraw1394
--rw-r--r--   1 root root       191 Dec  9  2007 ./source/l/libraw1394/README
--rw-r--r--   1 root root       249 Mar  8 19:21 ./source/l/libraw1394/libraw1394-2.0.7.tar.sign
--rw-r--r--   1 root root    268568 Mar  8 19:21 ./source/l/libraw1394/libraw1394-2.0.7.tar.xz
--rwxr-xr-x   1 root root      3633 May 11  2010 ./source/l/libraw1394/libraw1394.SlackBuild
--rw-r--r--   1 root root       807 May 11  2010 ./source/l/libraw1394/slack-desc
-drwxr-xr-x   2 root root      4096 Oct 13  2010 ./source/l/librsvg
--rw-r--r--   1 root root    516660 Sep 27  2010 ./source/l/librsvg/librsvg-2.32.0.tar.bz2
--rwxr-xr-x   1 root root      3486 Nov  6 03:55 ./source/l/librsvg/librsvg.SlackBuild
--rw-r--r--   1 root root       632 Feb 11  2008 ./source/l/librsvg/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 17  2009 ./source/l/libsamplerate
--rw-r--r--   1 root root   3268548 Feb 14  2009 ./source/l/libsamplerate/libsamplerate-0.1.7.tar.xz
--rwxr-xr-x   1 root root      1741 Jan 26 05:13 ./source/l/libsamplerate/libsamplerate.SlackBuild
--rw-r--r--   1 root root      1117 Dec 17  2009 ./source/l/libsamplerate/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 17 16:56 ./source/l/libsndfile
--rw-r--r--   1 root root    609332 Mar 23 09:39 ./source/l/libsndfile/libsndfile-1.0.24.tar.xz
--rwxr-xr-x   1 root root      3189 Jan 26 17:59 ./source/l/libsndfile/libsndfile.SlackBuild
--rw-r--r--   1 root root       828 Jan 23 00:47 ./source/l/libsndfile/slack-desc
-drwxr-xr-x   2 root root      4096 May  4  2010 ./source/l/libspectre
--rw-r--r--   1 root root    262053 Apr 21  2010 ./source/l/libspectre/libspectre-0.2.5.tar.bz2
--rwxr-xr-x   1 root root      3318 Dec  5 18:23 ./source/l/libspectre/libspectre.SlackBuild
--rw-r--r--   1 root root       870 Oct  9  2008 ./source/l/libspectre/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/l/libtermcap
--rwxr-xr-x   1 root root      2858 Aug  9  2010 ./source/l/libtermcap/libtermcap.SlackBuild
--rw-r--r--   1 root root       938 Feb 11  2008 ./source/l/libtermcap/slack-desc
--rw-r--r--   1 root root       213 Feb 15  2002 ./source/l/libtermcap/termcap-compat_1.2.3.diff.gz
--rw-r--r--   1 root root       655 Feb  4  2000 ./source/l/libtermcap/termcap-compat_1.2.3.dsc
--rw-r--r--   1 root root    552156 Feb  4  2000 ./source/l/libtermcap/termcap-compat_1.2.3.tar.gz
--rw-r--r--   1 root root       233 Jan  3  2003 ./source/l/libtermcap/termcap.bufsize.diff.gz
--rw-r--r--   1 root root       365 May 10  2000 ./source/l/libtermcap/termcap.h.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 17  2010 ./source/l/libtheora
--rw-r--r--   1 root root   1434496 Jan 25  2010 ./source/l/libtheora/libtheora-1.1.1.tar.xz
--rwxr-xr-x   1 root root      3783 Feb 17  2010 ./source/l/libtheora/libtheora.SlackBuild
--rw-r--r--   1 root root      1085 Sep 16  2006 ./source/l/libtheora/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  7 21:16 ./source/l/libtiff
--rw-r--r--   1 root root       722 Mar 21 20:17 ./source/l/libtiff/libtiff-CVE-2011-0192.patch.gz
--rw-r--r--   1 root root       755 Mar 21 20:17 ./source/l/libtiff/libtiff-CVE-2011-1167.patch.gz
--rwxr-xr-x   1 root root      3874 Apr  7 21:17 ./source/l/libtiff/libtiff.SlackBuild
--rw-r--r--   1 root root       852 Oct 28  2004 ./source/l/libtiff/slack-desc
--rw-r--r--   1 root root    932280 Jun 15  2010 ./source/l/libtiff/tiff-3.9.4.tar.xz
-drwxr-xr-x   2 root root      4096 Mar 24 23:41 ./source/l/libusb
--rw-r--r--   1 root root    331820 May  4  2010 ./source/l/libusb/libusb-1.0.8.tar.bz2
--rw-r--r--   1 root root    251218 Dec  1  2009 ./source/l/libusb/libusb-compat-0.1.3.tar.bz2
--rwxr-xr-x   1 root root      4892 Mar 24 23:41 ./source/l/libusb/libusb.SlackBuild
--rw-r--r--   1 root root       322 Mar 24 23:41 ./source/l/libusb/libusb.fix.debug.log.level.diff.gz
--rw-r--r--   1 root root       844 Dec  1  2009 ./source/l/libusb/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libvisual
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libvisual-plugins
--rw-r--r--   1 root root    575514 Mar 20  2006 ./source/l/libvisual-plugins/libvisual-plugins-0.4.0.tar.bz2
--rwxr-xr-x   1 root root      3460 Aug  9  2010 ./source/l/libvisual-plugins/libvisual-plugins.SlackBuild
--rw-r--r--   1 root root       912 Sep 12  2008 ./source/l/libvisual-plugins/libvisual-plugins.gstreamer.diff.gz
--rw-r--r--   1 root root      1190 Sep 12  2008 ./source/l/libvisual-plugins/slack-desc
--rw-r--r--   1 root root    430496 Mar 20  2006 ./source/l/libvisual/libvisual-0.4.0.tar.bz2
--rwxr-xr-x   1 root root      3512 Aug  9  2010 ./source/l/libvisual/libvisual.SlackBuild
--rw-r--r--   1 root root      1004 Aug 23  2006 ./source/l/libvisual/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libvncserver
--rw-r--r--   1 root root    797659 Jan 31  2009 ./source/l/libvncserver/LibVNCServer-0.9.7.tar.bz2
--rwxr-xr-x   1 root root      3473 Feb 15  2010 ./source/l/libvncserver/libvncserver.SlackBuild
--rw-r--r--   1 root root       211 Jan  8  2008 ./source/l/libvncserver/libvncserver.info
--rw-r--r--   1 root root       830 Aug  1  2008 ./source/l/libvncserver/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 16 17:54 ./source/l/libvorbis
--rw-r--r--   1 root root    994276 Nov  1 20:42 ./source/l/libvorbis/libvorbis-1.3.2.tar.xz
--rwxr-xr-x   1 root root      2889 Jul 28  2010 ./source/l/libvorbis/libvorbis.SlackBuild
--rw-r--r--   1 root root      1020 Dec 18  2003 ./source/l/libvorbis/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 15  2010 ./source/l/libwmf
--rw-r--r--   1 root root   1271924 Jun 14  2006 ./source/l/libwmf/libwmf-0.2.8.4.tar.xz
--rwxr-xr-x   1 root root      3438 Feb 15  2010 ./source/l/libwmf/libwmf.SlackBuild
--rw-r--r--   1 root root       340 Feb 15  2010 ./source/l/libwmf/libwmf.png14.diff.gz
--rw-r--r--   1 root root       745 Dec 15  2003 ./source/l/libwmf/slack-desc
--rw-r--r--   1 root root       767 Dec 15  2003 ./source/l/libwmf/slack-desc-docs
-drwxr-xr-x   2 root root      4096 Feb 24 22:24 ./source/l/libwnck
--rw-r--r--   1 root root    625724 Nov 17 12:17 ./source/l/libwnck/libwnck-2.30.6.tar.xz
--rwxr-xr-x   1 root root      3602 Feb 24 22:25 ./source/l/libwnck/libwnck.SlackBuild
--rw-r--r--   1 root root       933 Sep 15  2007 ./source/l/libwnck/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/libwpd
--rw-r--r--   1 root root    424176 Feb 12  2008 ./source/l/libwpd/libwpd-0.8.14.tar.bz2
--rwxr-xr-x   1 root root      2933 Aug  9  2010 ./source/l/libwpd/libwpd.SlackBuild
--rw-r--r--   1 root root       773 Apr 15  2006 ./source/l/libwpd/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 16 01:32 ./source/l/libxklavier
--rw-r--r--   1 root root    289268 Feb 13 13:53 ./source/l/libxklavier/libxklavier-5.1.tar.xz
--rwxr-xr-x   1 root root      3482 Feb 16 01:33 ./source/l/libxklavier/libxklavier.SlackBuild
--rw-r--r--   1 root root       748 Aug  1  2008 ./source/l/libxklavier/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  7 18:34 ./source/l/libxml2
--rw-r--r--   1 root root       452 Dec  7 18:34 ./source/l/libxml2/libxml2-2.7.8.broken.versioning.diff.gz
--rw-r--r--   1 root root   2729708 Nov  4 17:30 ./source/l/libxml2/libxml2-2.7.8.tar.xz
--rwxr-xr-x   1 root root      3639 Jan  8 01:51 ./source/l/libxml2/libxml2.SlackBuild
--rw-r--r--   1 root root       980 Jan  8  2008 ./source/l/libxml2/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  5  2009 ./source/l/libxslt
--rw-r--r--   1 root root   1666032 Sep 24  2009 ./source/l/libxslt/libxslt-1.1.26.tar.xz
--rwxr-xr-x   1 root root      3078 Dec  5  2009 ./source/l/libxslt/libxslt.SlackBuild
--rw-r--r--   1 root root       678 Mar 26  2005 ./source/l/libxslt/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/libzip
--rw-r--r--   1 root root    304965 Feb  1  2010 ./source/l/libzip/libzip-0.9.3.tar.bz2
--rwxr-xr-x   1 root root      3877 Aug  9  2010 ./source/l/libzip/libzip.SlackBuild
--rw-r--r--   1 root root       163 Jan  8  2008 ./source/l/libzip/libzip.info
--rw-r--r--   1 root root       882 Aug  1  2008 ./source/l/libzip/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 10  2010 ./source/l/loudmouth
--rw-r--r--   1 root root    301420 Oct 29  2008 ./source/l/loudmouth/loudmouth-1.4.3.tar.xz
--rwxr-xr-x   1 root root      4357 Apr 10  2010 ./source/l/loudmouth/loudmouth.SlackBuild
--rw-r--r--   1 root root       403 Nov 29  2008 ./source/l/loudmouth/loudmouth.async_assertion.diff.gz
--rw-r--r--   1 root root       272 Nov  3  2009 ./source/l/loudmouth/loudmouth.crtpath.diff.gz
--rw-r--r--   1 root root       399 Apr 10  2010 ./source/l/loudmouth/loudmouth.gnutls.configure.ac.diff.gz
--rw-r--r--   1 root root       429 Jun 13  2009 ./source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff.gz
--rw-r--r--   1 root root       777 Nov 16  2009 ./source/l/loudmouth/loudmouth.stanzadrop.diff.gz
--rw-r--r--   1 root root       900 Apr 10  2010 ./source/l/loudmouth/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/lzo
--rw-r--r--   1 root root       280 Dec 11  2006 ./source/l/lzo/.lzo.info
--rw-r--r--   1 root root    349732 Apr 30  2008 ./source/l/lzo/lzo-2.03.tar.xz
--rwxr-xr-x   1 root root      3397 Aug  9  2010 ./source/l/lzo/lzo.SlackBuild
--rw-r--r--   1 root root       728 Jun 10  2007 ./source/l/lzo/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 16 01:25 ./source/l/mhash
--rw-r--r--   1 root root    655906 Dec  8  2008 ./source/l/mhash/mhash-0.9.9.9.tar.bz2
--rwxr-xr-x   1 root root      3637 Feb 16 21:29 ./source/l/mhash/mhash.SlackBuild
--rw-r--r--   1 root root       924 May 30  2004 ./source/l/mhash/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/mm
--rw-r--r--   1 root root    248658 Aug 15  2006 ./source/l/mm/mm-1.4.2.tar.bz2
--rwxr-xr-x   1 root root      4190 Aug  9  2010 ./source/l/mm/mm.SlackBuild
--rw-r--r--   1 root root      1003 Aug 10  2006 ./source/l/mm/slack-desc
-drwxr-xr-x   3 root root      4096 Apr  5 02:51 ./source/l/mpfr
--rw-r--r--   1 root root   1016096 Apr  4 13:03 ./source/l/mpfr/mpfr-3.0.1.tar.xz
--rwxr-xr-x   1 root root      3660 Apr  5 02:55 ./source/l/mpfr/mpfr.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr  5 02:53 ./source/l/mpfr/patches
--rw-r--r--   1 root root      1042 May  8  2006 ./source/l/mpfr/slack-desc
-drwxr-xr-x   3 root root      4096 Apr  5 02:41 ./source/l/ncurses
--rw-r--r--   1 root root      5711 Oct  8  2002 ./source/l/ncurses/Eterm.ti
--rw-r--r--   1 root root   1656420 Apr  4 23:18 ./source/l/ncurses/ncurses-5.9.tar.xz
--rwxr-xr-x   1 root root      5846 Apr  5 02:45 ./source/l/ncurses/ncurses.SlackBuild
--rw-r--r--   1 root root       273 Dec 27  2006 ./source/l/ncurses/ncurses.mkhashsize.diff.gz
-drwxr-xr-x   2 root root      4096 Apr  5 02:42 ./source/l/ncurses/patches
--rw-r--r--   1 root root      2649 Mar 15  2001 ./source/l/ncurses/rxvt.terminfo
--rw-r--r--   1 root root      3709 Jul 21  2003 ./source/l/ncurses/screeninfo.src
--rw-r--r--   1 root root       904 Feb 11  2008 ./source/l/ncurses/slack-desc
--rw-r--r--   1 root root     42014 Nov 11  2007 ./source/l/ncurses/xterm.terminfo
-drwxr-xr-x   2 root root      4096 Mar  1 20:19 ./source/l/neon
--rw-r--r--   1 root root    884484 Oct 14  2010 ./source/l/neon/neon-0.29.5.tar.gz
--rwxr-xr-x   1 root root      4015 Mar  1 20:20 ./source/l/neon/neon.SlackBuild
--rw-r--r--   1 root root       798 Sep 18  2006 ./source/l/neon/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 15  2010 ./source/l/netpbm
--rw-r--r--   1 root root      9563 Feb 15  2010 ./source/l/netpbm/config.mk.gz
--rw-r--r--   1 root root   1917188 Feb 15  2010 ./source/l/netpbm/netpbm-10.49.02.tar.xz
--rw-r--r--   1 root root    322974 Apr 11  2004 ./source/l/netpbm/netpbm-manpages.tar.bz2
--rwxr-xr-x   1 root root      4039 Feb 15  2010 ./source/l/netpbm/netpbm.SlackBuild
--rw-r--r--   1 root root       688 Apr 11  2004 ./source/l/netpbm/slack-desc
--rwxr-xr-x   1 root root        77 Feb 16  2007 ./source/l/netpbm/svn-checkout-stable.sh
-drwxr-xr-x   2 root root      4096 Sep 16  2009 ./source/l/notify-python
--rw-r--r--   1 root root    214514 Oct  8  2006 ./source/l/notify-python/notify-python-0.1.1.tar.bz2
--rwxr-xr-x   1 root root      3024 Feb 20  2010 ./source/l/notify-python/notify-python.SlackBuild
--rw-r--r--   1 root root       819 Feb 20  2010 ./source/l/notify-python/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/openexr
--rw-r--r--   1 root root  12080576 Jul 23  2010 ./source/l/openexr/openexr-1.7.0.tar.xz
--rwxr-xr-x   1 root root      3557 Aug  9  2010 ./source/l/openexr/openexr.SlackBuild
--rw-r--r--   1 root root       367 Aug  9  2010 ./source/l/openexr/openexr.gcc4.diff.gz
--rw-r--r--   1 root root       162 Apr 29  2008 ./source/l/openexr/openexr.info
--rw-r--r--   1 root root       915 Aug  1  2008 ./source/l/openexr/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  7 00:56 ./source/l/pango
--rw-r--r--   1 root root   1142608 Apr  4 22:32 ./source/l/pango/pango-1.28.4.tar.xz
--rwxr-xr-x   1 root root      4966 Apr  7 00:56 ./source/l/pango/pango.SlackBuild
--rw-r--r--   1 root root       502 Oct 13  2010 ./source/l/pango/pango.etc.host.location.diff.gz
--rw-r--r--   1 root root       885 Feb 11  2008 ./source/l/pango/slack-desc
--rw-r--r--   1 root root      2324 Aug 11  2009 ./source/l/pango/update-pango-querymodules
-drwxr-xr-x   2 root root      4096 Jul 12  2010 ./source/l/parted
--rw-r--r--   1 root root   1454340 May 28  2010 ./source/l/parted/parted-2.3.tar.xz
--rwxr-xr-x   1 root root      4158 Feb  7  2010 ./source/l/parted/parted.SlackBuild
--rwxr-xr-x   1 root root      4158 Feb  7  2010 ./source/l/parted/parted.SlackBuild.static
--rw-r--r--   1 root root       341 Jul 12  2010 ./source/l/parted/parted.configure.diff.gz
--rw-r--r--   1 root root       840 Jun  5  2002 ./source/l/parted/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 26 05:22 ./source/l/pcre
--rw-r--r--   1 root root    759088 Jan 15 17:31 ./source/l/pcre/pcre-8.12.tar.xz
--rwxr-xr-x   1 root root      4084 Mar 26 05:22 ./source/l/pcre/pcre.SlackBuild
--rw-r--r--   1 root root       819 Mar 30  2002 ./source/l/pcre/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 27 18:00 ./source/l/phonon
-drwxr-xr-x   2 root root      4096 Dec 17 21:10 ./source/l/phonon-mplayer
--rw-r--r--   1 root root     12619 Dec 17 21:00 ./source/l/phonon-mplayer/cmake_fixes.tar.gz
--rw-r--r--   1 root root    341740 Dec 17 21:00 ./source/l/phonon-mplayer/phonon-mplayer-20101213.tar.xz
--rwxr-xr--   1 root root      3480 Dec 18 02:34 ./source/l/phonon-mplayer/phonon-mplayer.SlackBuild
--rw-r--r--   1 root root       837 Dec 18 02:32 ./source/l/phonon-mplayer/slack-desc
--rw-r--r--   1 root root    648733 Nov 24 18:47 ./source/l/phonon/phonon-4.4.3.tar.bz2
--rwxr-xr-x   1 root root      3540 Nov 27 18:01 ./source/l/phonon/phonon.SlackBuild
--rw-r--r--   1 root root       759 Nov  7  2009 ./source/l/phonon/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 14  2010 ./source/l/pil
--rw-r--r--   1 root root    400368 Nov 15  2009 ./source/l/pil/Imaging-1.1.7.tar.xz
--rwxr-xr-x   1 root root      3218 Feb 14  2010 ./source/l/pil/pil.SlackBuild
--rw-r--r--   1 root root       873 Apr 30  2009 ./source/l/pil/slack-desc
-drwxr-xr-x   2 root root      4096 May  2  2010 ./source/l/pilot-link
--rw-r--r--   1 root root   1578735 Feb  7  2010 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2
--rw-r--r--   1 root root       198 Feb  7  2010 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2.asc
--rwxr-xr-x   1 root root      4256 Jan 26 19:25 ./source/l/pilot-link/pilot-link.SlackBuild
--rw-r--r--   1 root root       645 Feb 19  2010 ./source/l/pilot-link/pilot-link.png14.diff.gz
--rw-r--r--   1 root root       877 Feb 11  2008 ./source/l/pilot-link/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 19 20:06 ./source/l/polkit
-drwxr-xr-x   2 root root      4096 Mar  4 00:03 ./source/l/polkit-gnome
--rw-r--r--   1 root root    336824 Mar  3 18:52 ./source/l/polkit-gnome/polkit-gnome-0.101.tar.xz
--rw-r--r--   1 root root      4581 Feb 25 05:43 ./source/l/polkit-gnome/polkit-gnome-authentication-agent-1.desktop
--rwxr-xr-x   1 root root      3309 Feb 27 19:26 ./source/l/polkit-gnome/polkit-gnome.SlackBuild
--rw-r--r--   1 root root       829 May  6  2010 ./source/l/polkit-gnome/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 19 20:06 ./source/l/polkit/CVE-2011-1485
--rw-r--r--   1 root root      3907 Apr 19 20:06 ./source/l/polkit/CVE-2011-1485/0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch
--rw-r--r--   1 root root     21673 Apr 19 20:06 ./source/l/polkit/CVE-2011-1485/0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch
--rw-r--r--   1 root root      1529 Apr 19 20:06 ./source/l/polkit/CVE-2011-1485/0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch
--rw-r--r--   1 root root      4683 Apr 19 20:06 ./source/l/polkit/CVE-2011-1485/0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch
--rw-r--r--   1 root root    582932 Mar  3 18:52 ./source/l/polkit/polkit-0.101.tar.xz
--rwxr-xr-x   1 root root      4750 Apr 20 03:06 ./source/l/polkit/polkit.SlackBuild
--rw-r--r--   1 root root       906 Jan  6  2010 ./source/l/polkit/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  6 05:25 ./source/l/poppler
-drwxr-xr-x   2 root root      4096 Nov 11 20:57 ./source/l/poppler-data
--rw-r--r--   1 root root   1471440 Oct 28 22:23 ./source/l/poppler-data/poppler-data-0.4.4.tar.xz
--rwxr-xr-x   1 root root      2043 Sep  8  2010 ./source/l/poppler-data/poppler-data.SlackBuild
--rw-r--r--   1 root root      1064 Apr 12  2007 ./source/l/poppler-data/slack-desc
--rw-r--r--   1 root root   1268144 Mar 28 21:38 ./source/l/poppler/poppler-0.16.4.tar.xz
--rwxr-xr-x   1 root root      3793 Sep  8  2010 ./source/l/poppler/poppler.SlackBuild
--rw-r--r--   1 root root       952 Apr 10  2007 ./source/l/poppler/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/popt
--rw-r--r--   1 root root    489869 Sep 17  2002 ./source/l/popt/popt-1.7.tar.bz2
--rwxr-xr-x   1 root root      3755 Apr 26  2010 ./source/l/popt/popt.SlackBuild
--rw-r--r--   1 root root      1047 Feb 22  2003 ./source/l/popt/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 29  2010 ./source/l/pycairo
--rw-r--r--   1 root root    447388 May 20  2010 ./source/l/pycairo/py2cairo-1.8.10.tar.xz
--rwxr-xr-x   1 root root      3484 Jul 29  2010 ./source/l/pycairo/pycairo.SlackBuild
--rw-r--r--   1 root root        68 Dec 14  2009 ./source/l/pycairo/pycairo.url
--rw-r--r--   1 root root       745 Jul 29  2010 ./source/l/pycairo/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 22 06:21 ./source/l/pycups
--rw-r--r--   1 root root     49899 Mar 22 06:21 ./source/l/pycups/pycups-1.9.55.tar.bz2
--rwxr-xr-x   1 root root      2849 Feb 17  2010 ./source/l/pycups/pycups.SlackBuild
--rw-r--r--   1 root root       121 Jul 25  2008 ./source/l/pycups/pycups.info
--rw-r--r--   1 root root       688 Aug  1  2008 ./source/l/pycups/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 14 22:55 ./source/l/pygobject
--rw-r--r--   1 root root    808427 Sep 27  2010 ./source/l/pygobject/pygobject-2.26.0.tar.bz2
--rwxr-xr-x   1 root root      3589 Nov 14 22:56 ./source/l/pygobject/pygobject.SlackBuild
--rw-r--r--   1 root root       472 Nov 14 22:54 ./source/l/pygobject/pygobject.fix.no.introspection.crash.diff.gz
--rw-r--r--   1 root root        72 Dec 14  2009 ./source/l/pygobject/pygobject.url
--rw-r--r--   1 root root       858 Feb 11  2008 ./source/l/pygobject/slack-desc
-drwxr-xr-x   2 root root      4096 Oct 13  2010 ./source/l/pygtk
--rw-r--r--   1 root root   2285379 Sep 26  2010 ./source/l/pygtk/pygtk-2.22.0.tar.bz2
--rwxr-xr-x   1 root root      3484 Feb  7  2010 ./source/l/pygtk/pygtk.SlackBuild
--rw-r--r--   1 root root       777 Jan  9  2008 ./source/l/pygtk/slack-desc
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/pyrex
--rw-r--r--   1 root root    197340 Apr 12  2010 ./source/l/pyrex/Pyrex-0.9.9.tar.xz
--rw-r--r--   1 root root        58 Mar  5  2009 ./source/l/pyrex/Pyrex.url
--rwxr-xr-x   1 root root      3113 Aug  9  2010 ./source/l/pyrex/pyrex.SlackBuild
--rw-r--r--   1 root root       847 Mar  5  2009 ./source/l/pyrex/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  3  2009 ./source/l/qca
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/qca-cyrus-sasl
--rw-r--r--   1 root root     24075 Nov  8  2007 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl-2.0.0-beta3.tar.bz2
--rwxr-xr-x   1 root root      2942 Aug  9  2010 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl.SlackBuild
--rw-r--r--   1 root root       736 Jul 31  2008 ./source/l/qca-cyrus-sasl/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/qca-gnupg
--rw-r--r--   1 root root     38177 Apr 23  2008 ./source/l/qca-gnupg/qca-gnupg-2.0.0-beta3.tar.bz2
--rwxr-xr-x   1 root root      2930 Aug  9  2010 ./source/l/qca-gnupg/qca-gnupg.SlackBuild
--rw-r--r--   1 root root       656 Jul 31  2008 ./source/l/qca-gnupg/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/l/qca-ossl
--rw-r--r--   1 root root     49188 Dec 11  2007 ./source/l/qca-ossl/qca-ossl-2.0.0-beta3.tar.bz2
--rwxr-xr-x   1 root root      3050 Aug  9  2010 ./source/l/qca-ossl/qca-ossl.SlackBuild
--rw-r--r--   1 root root       443 Dec 16  2008 ./source/l/qca-ossl/qca-ossl.nowhirlpool.diff.gz
--rw-r--r--   1 root root       947 Jul 31  2008 ./source/l/qca-ossl/slack-desc
--rw-r--r--   1 root root   1937201 Apr 29  2009 ./source/l/qca/qca-2.0.2.tar.bz2
--rwxr-xr-x   1 root root      2883 Nov  3  2009 ./source/l/qca/qca.SlackBuild
--rw-r--r--   1 root root       112 Jul 24  2008 ./source/l/qca/qca.info
--rw-r--r--   1 root root      1021 Jul 31  2006 ./source/l/qca/slack-desc
-drwxr-xr-x   2 root root      4096 Jul  5  2010 ./source/l/qimageblitz
--rw-r--r--   1 root root     57681 Jul  5  2010 ./source/l/qimageblitz/qimageblitz-0.0.6.tar.bz2
--rwxr-xr-x   1 root root      2906 Jul  5  2010 ./source/l/qimageblitz/qimageblitz.SlackBuild
--rw-r--r--   1 root root       278 Dec 18  2007 ./source/l/qimageblitz/qimageblitz.info
--rw-r--r--   1 root root       851 Aug  1  2008 ./source/l/qimageblitz/slack-desc
-drwxr-xr-x   3 root root      4096 Mar 25 18:58 ./source/l/qt
--rw-r--r--   1 root root       327 Nov 21 00:00 ./source/l/qt/README
--rw-r--r--   1 root root        92 Dec 22  2007 ./source/l/qt/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Oct  3  2008 ./source/l/qt/profile.d
--rw-r--r--   1 root root       661 Oct  3  2008 ./source/l/qt/profile.d/qt4.csh
--rw-r--r--   1 root root       561 Oct  3  2008 ./source/l/qt/profile.d/qt4.sh
--rw-r--r--   1 root root 106125788 Nov 20 23:56 ./source/l/qt/qt-4.7.0_7abde40.tar.xz
--rw-r--r--   1 root root      1151 Jan  7 06:41 ./source/l/qt/qt.QSortFilterProxyModel.reformatted.diff.gz
--rwxr-xr-x   1 root root      7143 Mar 25 18:59 ./source/l/qt/qt.SlackBuild
--rw-r--r--   1 root root      1188 Mar 24 23:09 ./source/l/qt/qt.blacklist.bad.certs.diff.gz
--rw-r--r--   1 root root       758 Mar 25 18:58 ./source/l/qt/qt.blacklist.bad.certs.patch02.diff.gz
--rw-r--r--   1 root root       277 Apr  3  2008 ./source/l/qt/qt.mysql.h.diff.gz
--rw-r--r--   1 root root       260 Dec 22  2007 ./source/l/qt/qt.x86.cflags.diff.gz
--rw-r--r--   1 root root       719 May  4  2010 ./source/l/qt/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 19  2010 ./source/l/qtscriptgenerator
--rw-r--r--   1 root root       564 Jun  5  2009 ./source/l/qtscriptgenerator/include-everything.patch.gz
--rw-r--r--   1 root root    374223 Jun  5  2009 ./source/l/qtscriptgenerator/qtscriptgenerator-src-0.1.0.tar.gz
--rwxr-xr-x   1 root root      3960 Feb 19  2010 ./source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild
--rw-r--r--   1 root root       197 Feb 19  2010 ./source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff.gz
--rw-r--r--   1 root root       292 Jun  5  2009 ./source/l/qtscriptgenerator/qtscriptgenerator.info
--rw-r--r--   1 root root       945 Jun  5  2009 ./source/l/qtscriptgenerator/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  5  2010 ./source/l/raptor
--rw-r--r--   1 root root    907160 Jan 30  2010 ./source/l/raptor/raptor-1.4.21.tar.xz
--rwxr-xr-x   1 root root      3641 Mar  5  2010 ./source/l/raptor/raptor.SlackBuild
--rw-r--r--   1 root root        96 Nov 28  2009 ./source/l/raptor/raptor.info
--rw-r--r--   1 root root       624 Aug  1  2008 ./source/l/raptor/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  8 19:07 ./source/l/raptor2
--rw-r--r--   1 root root    933068 Jan  3 22:01 ./source/l/raptor2/raptor2-2.0.0.tar.xz
--rwxr-xr-x   1 root root      3683 Feb  8 19:08 ./source/l/raptor2/raptor2.SlackBuild
--rw-r--r--   1 root root       637 Feb  8 19:06 ./source/l/raptor2/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 22:17 ./source/l/rasqal
--rw-r--r--   1 root root    799636 Dec  5 03:31 ./source/l/rasqal/rasqal-0.9.21.tar.xz
--rwxr-xr-x   1 root root      3719 Nov 29 06:31 ./source/l/rasqal/rasqal.SlackBuild
--rw-r--r--   1 root root       507 May  4  2010 ./source/l/rasqal/slack-desc
-drwxr-xr-x   3 root root      4096 May 19  2009 ./source/l/readline
-drwxr-xr-x   2 root root      4096 Feb 21  2009 ./source/l/readline/readline-5.2-patches
--rw-r--r--   1 root root       874 Dec 12  2006 ./source/l/readline/readline-5.2-patches/readline52-001
--rw-r--r--   1 root root        65 Dec 12  2006 ./source/l/readline/readline-5.2-patches/readline52-001.sig
--rw-r--r--   1 root root      1433 Mar 21  2007 ./source/l/readline/readline-5.2-patches/readline52-002
--rw-r--r--   1 root root        65 Mar 21  2007 ./source/l/readline/readline-5.2-patches/readline52-002.sig
--rw-r--r--   1 root root      1204 Apr 25  2007 ./source/l/readline/readline-5.2-patches/readline52-003
--rw-r--r--   1 root root        65 Apr 25  2007 ./source/l/readline/readline-5.2-patches/readline52-003.sig
--rw-r--r--   1 root root      2192 Apr 25  2007 ./source/l/readline/readline-5.2-patches/readline52-004
--rw-r--r--   1 root root        65 Apr 25  2007 ./source/l/readline/readline-5.2-patches/readline52-004.sig
--rw-r--r--   1 root root      8029 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-005
--rw-r--r--   1 root root        65 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-005.sig
--rw-r--r--   1 root root      2820 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-006
--rw-r--r--   1 root root        65 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-006.sig
--rw-r--r--   1 root root      1523 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-007
--rw-r--r--   1 root root        65 Aug 22  2007 ./source/l/readline/readline-5.2-patches/readline52-007.sig
--rw-r--r--   1 root root      2277 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-008
--rw-r--r--   1 root root        65 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-008.sig
--rw-r--r--   1 root root      1332 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-009
--rw-r--r--   1 root root        65 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-009.sig
--rw-r--r--   1 root root      1543 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-010
--rw-r--r--   1 root root        65 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-010.sig
--rw-r--r--   1 root root       886 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-011
--rw-r--r--   1 root root        65 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-011.sig
--rw-r--r--   1 root root      3870 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-012
--rw-r--r--   1 root root        65 Dec 15  2007 ./source/l/readline/readline-5.2-patches/readline52-012.sig
--rw-r--r--   1 root root      5147 Nov 18  2008 ./source/l/readline/readline-5.2-patches/readline52-013
--rw-r--r--   1 root root        65 Nov 18  2008 ./source/l/readline/readline-5.2-patches/readline52-013.sig
--rw-r--r--   1 root root   1693789 Oct 11  2006 ./source/l/readline/readline-5.2.tar.bz2
--rwxr-xr-x   1 root root      3079 Aug  9  2010 ./source/l/readline/readline.SlackBuild
--rw-r--r--   1 root root      1018 Mar 23  2002 ./source/l/readline/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 22:22 ./source/l/redland
--rw-r--r--   1 root root    836644 Oct 14  2010 ./source/l/redland/redland-1.0.12.tar.xz
--rwxr-xr-x   1 root root      4374 Nov 29 06:29 ./source/l/redland/redland.SlackBuild
--rw-r--r--   1 root root       606 Aug  1  2008 ./source/l/redland/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 25 13:38 ./source/l/sdl
--rw-r--r--   1 root root   3077408 Oct 20  2009 ./source/l/sdl/SDL-1.2.14.tar.xz
--rw-r--r--   1 root root   1212636 Nov 15  2009 ./source/l/sdl/SDL_image-1.2.10.tar.xz
--rw-r--r--   1 root root   2525128 Nov 15  2009 ./source/l/sdl/SDL_mixer-1.2.11.tar.xz
--rw-r--r--   1 root root       212 Feb 14  2010 ./source/l/sdl/SDL_mixer.usrlocal.diff.gz
--rw-r--r--   1 root root    223252 Jul 21  2007 ./source/l/sdl/SDL_net-1.2.7.tar.xz
--rw-r--r--   1 root root   1221848 Oct 19  2009 ./source/l/sdl/SDL_ttf-2.0.10.tar.xz
--rwxr-xr-x   1 root root      7264 Apr 25 05:25 ./source/l/sdl/sdl.SlackBuild
--rw-r--r--   1 root root       637 Apr 25 05:25 ./source/l/sdl/sdl.linux-2.6.31.input_absinfo.diff.gz
--rw-r--r--   1 root root       941 Mar 27  2004 ./source/l/sdl/slack-desc
-drwxr-xr-x   2 root root      4096 Jun  7  2010 ./source/l/shared-desktop-ontologies
--rw-r--r--   1 root root     90155 May  9  2010 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies-0.5.tar.bz2
--rwxr-xr-x   1 root root      3404 Jun  7  2010 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild
--rw-r--r--   1 root root      1119 May  5  2010 ./source/l/shared-desktop-ontologies/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 20 22:00 ./source/l/shared-mime-info
--rw-r--r--   1 root root       352 Oct 18  2009 ./source/l/shared-mime-info/doinst.sh.gz
--rw-r--r--   1 root root    580163 Dec  1 17:37 ./source/l/shared-mime-info/shared-mime-info-0.90.tar.bz2
--rwxr-xr-x   1 root root      3825 Apr 30  2010 ./source/l/shared-mime-info/shared-mime-info.SlackBuild
--rw-r--r--   1 root root       979 Dec 23  2007 ./source/l/shared-mime-info/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 29 06:01 ./source/l/sip
--rw-r--r--   1 root root    406528 Oct 22  2010 ./source/l/sip/sip-4.11.2.tar.xz
--rwxr-xr-x   1 root root      3026 Nov 29 06:01 ./source/l/sip/sip.SlackBuild
--rw-r--r--   1 root root       147 Nov 28  2009 ./source/l/sip/sip.info
--rw-r--r--   1 root root       849 May  4  2010 ./source/l/sip/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  1 20:16 ./source/l/slang
--rw-r--r--   1 root root       994 Aug  1  2006 ./source/l/slang/slack-desc
--rw-r--r--   1 root root   1424726 Dec 13 07:23 ./source/l/slang/slang-2.2.3.tar.bz2
--rw-r--r--   1 root root       262 Dec 13 07:26 ./source/l/slang/slang-2.2.3.tar.bz2.asc
--rwxr-xr-x   1 root root      3784 Jan  1 20:16 ./source/l/slang/slang.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/slang1
--rw-r--r--   1 root root      1006 Aug  1  2006 ./source/l/slang1/slack-desc
--rw-r--r--   1 root root    631079 Mar 23  2003 ./source/l/slang1/slang-1.4.9.tar.bz2
--rwxr-xr-x   1 root root      3303 Aug  9  2010 ./source/l/slang1/slang1.SlackBuild
-drwxr-xr-x   2 root root      4096 Nov 21 03:08 ./source/l/soprano
--rw-r--r--   1 root root       845 May  4  2010 ./source/l/soprano/slack-desc
--rw-r--r--   1 root root   1944325 Sep  9  2010 ./source/l/soprano/soprano-2.5.2.tar.bz2
--rwxr-xr-x   1 root root      3336 Dec  9 18:57 ./source/l/soprano/soprano.SlackBuild
-drwxr-xr-x   2 root root      4096 Jun 10  2009 ./source/l/startup-notification
--rw-r--r--   1 root root       830 Feb 11  2008 ./source/l/startup-notification/slack-desc
--rw-r--r--   1 root root    248645 Jun 10  2009 ./source/l/startup-notification/startup-notification-0.10.tar.bz2
--rwxr-xr-x   1 root root      3060 Feb  6  2010 ./source/l/startup-notification/startup-notification.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb  8  2010 ./source/l/strigi
--rw-r--r--   1 root root       965 Aug  1  2008 ./source/l/strigi/slack-desc
--rw-r--r--   1 root root    936320 Feb  3  2010 ./source/l/strigi/strigi-0.7.2.tar.bz2
--rwxr-xr-x   1 root root      3453 Feb 12 23:05 ./source/l/strigi/strigi.SlackBuild
--rw-r--r--   1 root root       146 May 17  2008 ./source/l/strigi/strigi.info
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/svgalib
--rw-r--r--   1 root root       802 Mar  9  2009 ./source/l/svgalib/slack-desc
--rw-r--r--   1 root root       509 May 31  2008 ./source/l/svgalib/svgalib-1.9.25-kernel-2.6.26.diff.gz
--rw-r--r--   1 root root    807984 Jul 14  2006 ./source/l/svgalib/svgalib-1.9.25.tar.bz2
--rwxr-xr-x   1 root root      4097 Aug  9  2010 ./source/l/svgalib/svgalib.SlackBuild
--rw-r--r--   1 root root       271 Mar  9  2009 ./source/l/svgalib/svgalib.nohelper.diff.gz
--rw-r--r--   1 root root       282 Mar 30  2007 ./source/l/svgalib/svgalib.prefix.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 22 06:28 ./source/l/system-config-printer
--rw-r--r--   1 root root       380 May  5  2010 ./source/l/system-config-printer/doinst.sh.gz
--rw-r--r--   1 root root      1217 May  4  2010 ./source/l/system-config-printer/slack-desc
--rw-r--r--   1 root root    968996 Feb  9 15:10 ./source/l/system-config-printer/system-config-printer-1.2.7.tar.xz
--rw-r--r--   1 root root        65 Feb  9 16:08 ./source/l/system-config-printer/system-config-printer-1.2.7.tar.xz.sig
--rwxr-xr--   1 root root      4176 Dec 30 18:17 ./source/l/system-config-printer/system-config-printer.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 31 01:05 ./source/l/t1lib
--rw-r--r--   1 root root       813 Apr 30  2002 ./source/l/t1lib/slack-desc
--rw-r--r--   1 root root   1429408 Dec 23  2007 ./source/l/t1lib/t1lib-5.1.2.tar.xz
--rwxr-xr-x   1 root root      4291 Mar 31 01:15 ./source/l/t1lib/t1lib.SlackBuild
--rw-r--r--   1 root root     17575 Jul 24  2008 ./source/l/t1lib/t1lib_5.1.2-3.diff.gz
-drwxr-xr-x   2 root root      4096 Jan  1 21:41 ./source/l/taglib
-drwxr-xr-x   2 root root      4096 Dec 17  2009 ./source/l/taglib-extras
--rw-r--r--   1 root root       985 Jun  5  2009 ./source/l/taglib-extras/slack-desc
--rw-r--r--   1 root root     31363 Sep 21  2009 ./source/l/taglib-extras/taglib-extras-1.0.1.tar.gz
--rwxr-xr-x   1 root root      2976 Aug  9  2010 ./source/l/taglib-extras/taglib-extras.SlackBuild
--rw-r--r--   1 root root       797 Feb 22  2004 ./source/l/taglib/slack-desc
--rw-r--r--   1 root root    642284 Apr 19  2010 ./source/l/taglib/taglib-1.6.3.tar.xz
--rwxr-xr-x   1 root root      2958 Jan  1 21:42 ./source/l/taglib/taglib.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/tango-icon-theme
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/l/tango-icon-theme-extras
--rw-r--r--   1 root root      1015 Feb 27  2008 ./source/l/tango-icon-theme-extras/slack-desc
--rw-r--r--   1 root root    128095 Jun  1  2006 ./source/l/tango-icon-theme-extras/tango-icon-theme-extras-0.1.0.tar.bz2
--rwxr-xr-x   1 root root      2937 May 19  2009 ./source/l/tango-icon-theme-extras/tango-icon-theme-extras.SlackBuild
--rw-r--r--   1 root root       990 Feb 27  2008 ./source/l/tango-icon-theme/slack-desc
--rw-r--r--   1 root root   1376581 Feb 26  2009 ./source/l/tango-icon-theme/tango-icon-theme-0.8.90.tar.bz2
--rwxr-xr-x   1 root root      2033 May 19  2009 ./source/l/tango-icon-theme/tango-icon-theme.SlackBuild
-drwxr-xr-x   2 root root      4096 Jan 27  2010 ./source/l/urwid
--rw-r--r--   1 root root      9389 Mar 13  2009 ./source/l/urwid/LICENSE.gz
--rw-r--r--   1 root root       843 Apr 21  2009 ./source/l/urwid/slack-desc
--rw-r--r--   1 root root    238005 Jan 25  2010 ./source/l/urwid/urwid-0.9.9.1.tar.gz
--rwxr-xr-x   1 root root      2867 Jan 27  2010 ./source/l/urwid/urwid.SlackBuild
--rw-r--r--   1 root root        24 Mar 14  2009 ./source/l/urwid/urwid.url
-drwxr-xr-x   2 root root      4096 Apr  4 04:29 ./source/l/v4l-utils
--rw-r--r--   1 root root      1030 May 14  2010 ./source/l/v4l-utils/slack-desc
--rw-r--r--   1 root root    276732 Feb  9 22:04 ./source/l/v4l-utils/v4l-utils-0.8.3.tar.xz
--rwxr-xr-x   1 root root      4262 Apr 11 04:35 ./source/l/v4l-utils/v4l-utils.SlackBuild
-drwxr-xr-x   2 root root      4096 Jul 29  2010 ./source/l/virtuoso-ose
--rw-r--r--   1 root root       267 Dec 24  2009 ./source/l/virtuoso-ose/doinst.sh.gz
--rw-r--r--   1 root root       889 Feb 24  2010 ./source/l/virtuoso-ose/slack-desc
--rw-r--r--   1 root root  58883504 Jul 29  2010 ./source/l/virtuoso-ose/virtuoso-opensource-6.1.2.tar.xz
--rwxr-xr-x   1 root root      3709 Jul 29  2010 ./source/l/virtuoso-ose/virtuoso-ose.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb 16 03:58 ./source/l/vte
--rw-r--r--   1 root root       710 Feb 17  2007 ./source/l/vte/slack-desc
--rw-r--r--   1 root root    952736 Nov 13 13:34 ./source/l/vte/vte-0.26.2.tar.xz
--rwxr-xr-x   1 root root      4143 Nov 11 19:09 ./source/l/vte/vte.SlackBuild
-drwxr-xr-x   2 root root      4096 Aug  9  2010 ./source/l/wavpack
--rw-r--r--   1 root root       841 Mar 16  2008 ./source/l/wavpack/slack-desc
--rw-r--r--   1 root root    394434 Dec  1  2009 ./source/l/wavpack/wavpack-4.60.1.tar.bz2
--rwxr-xr-x   1 root root      3780 Aug 10  2010 ./source/l/wavpack/wavpack.SlackBuild
-drwxr-xr-x   2 root root      4096 Nov 28  2009 ./source/l/wv2
--rw-r--r--   1 root root       876 Nov 17  2003 ./source/l/wv2/slack-desc
--rw-r--r--   1 root root    373612 Oct 31  2009 ./source/l/wv2/wv2-0.4.2.tar.xz
--rwxr-xr-x   1 root root      2939 Dec 17  2009 ./source/l/wv2/wv2.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb  9 18:12 ./source/l/zlib
--rw-r--r--   1 root root       814 Feb 15  2002 ./source/l/zlib/slack-desc
--rw-r--r--   1 root root    433868 Apr 20  2010 ./source/l/zlib/zlib-1.2.5.tar.xz
--rwxr-xr-x   1 root root      4118 Feb  9 17:05 ./source/l/zlib/zlib.SlackBuild
--rw-r--r--   1 root root       272 Feb  9 18:12 ./source/l/zlib/zlib.largefile64_source.diff.gz
-drwxr-xr-x   3 root root      4096 Mar 23 19:58 ./source/local
--rw-r--r--   1 root root        45 Aug 10  2010 ./source/local/README
-drwxr-xr-x   3 root root      4096 Apr 24 02:49 ./source/local/jre
--rw-r--r--   1 root root      3339 Apr 14 08:49 ./source/local/jre/COPYRIGHT
--rw-r--r--   1 root root        46 Apr 14 08:49 ./source/local/jre/README
--rw-r--r--   1 root root        50 Apr 14 08:49 ./source/local/jre/THIRDPARTYLICENSEREADME.txt
--rw-r--r--   1 root root       917 Apr 14 08:49 ./source/local/jre/Welcome.html
--rw-r--r--   1 root root  21180382 Apr 24 01:45 ./source/local/jre/jre-6u25-linux-x64.bin
--rwxr-xr-x   1 root root      4252 Apr 24 02:49 ./source/local/jre/jre.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr 29  2009 ./source/local/jre/profile.d
--rwxr-xr-x   1 root root       122 Apr 29  2009 ./source/local/jre/profile.d/jre.csh
--rwxr-xr-x   1 root root       125 Apr 29  2009 ./source/local/jre/profile.d/jre.sh
--rw-r--r--   1 root root       963 Dec 19 00:09 ./source/local/jre/slack-desc
-drwxr-xr-x 135 root root      4096 Apr  5 06:26 ./source/n
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/alpine
--rw-r--r--   1 root root   5222673 Aug 26  2008 ./source/n/alpine/alpine-2.00.tar.bz2
--rwxr-xr-x   1 root root      6362 Mar  6  2010 ./source/n/alpine/alpine.SlackBuild
--rw-r--r--   1 root root       255 Aug  7  2008 ./source/n/alpine/alpine.config.h.diff.gz
--rw-r--r--   1 root root       301 Aug  7  2008 ./source/n/alpine/alpine.manpage.diff.gz
--rw-r--r--   1 root root      2493 Aug  7  2008 ./source/n/alpine/alpine.tech-notes.txt.diff.gz
--rw-r--r--   1 root root       472 Aug  7  2008 ./source/n/alpine/doinst.sh.alpine
--rw-r--r--   1 root root       737 Aug  7  2008 ./source/n/alpine/pinepgp-0.18.0-makefile-sed-fix.diff.gz
--rw-r--r--   1 root root     38103 Nov 24  2002 ./source/n/alpine/pinepgp-0.18.0.tar.gz
--rw-r--r--   1 root root        72 Nov 24  2002 ./source/n/alpine/pinepgp-0.18.0.tar.gz.sig
--rw-r--r--   1 root root       157 Aug  7  2008 ./source/n/alpine/pinepgp.pinegpgp.in.diff.gz
--rw-r--r--   1 root root      1102 Aug  7  2008 ./source/n/alpine/slack-desc.alpine
--rw-r--r--   1 root root       749 Aug  7  2008 ./source/n/alpine/slack-desc.imapd
-drwxr-xr-x   2 root root      4096 Mar  5  2010 ./source/n/autofs
--rw-r--r--   1 root root       857 Mar  5  2010 ./source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz
--rw-r--r--   1 root root    301327 Sep  3  2009 ./source/n/autofs/autofs-5.0.5.tar.bz2
--rwxr-xr-x   1 root root      4248 Mar  5  2010 ./source/n/autofs/autofs.SlackBuild
--rw-r--r--   1 root root       369 Mar  5  2010 ./source/n/autofs/doinst.sh.gz
--rw-r--r--   1 root root       873 Feb 27  2002 ./source/n/autofs/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/biff+comsat
--rw-r--r--   1 root root       195 Feb 26  2001 ./source/n/biff+comsat/biff+comsat-0.17.diff.gz
--rw-r--r--   1 root root     13700 Jul 31  2000 ./source/n/biff+comsat/biff+comsat-0.17.tar.gz
--rwxr-xr-x   1 root root      2878 Aug 10  2010 ./source/n/biff+comsat/biff+comsat.SlackBuild
--rw-r--r--   1 root root       729 Jun 21  2004 ./source/n/biff+comsat/biff+comsat.badutmp.diff.gz
--rw-r--r--   1 root root      1222 Jun  3  2001 ./source/n/biff+comsat/biff+comsat.offset.diff.gz
--rw-r--r--   1 root root      1148 Apr 30  2007 ./source/n/biff+comsat/slack-desc
-drwxr-xr-x   3 root root      4096 Feb 23 17:40 ./source/n/bind
--rw-r--r--   1 root root      5120 Jun  8  2007 ./source/n/bind/3link.sh
--rw-r--r--   1 root root   7653584 Feb 14 21:18 ./source/n/bind/bind-9.7.3.tar.gz
--rw-r--r--   1 root root       481 Feb 14 21:18 ./source/n/bind/bind-9.7.3.tar.gz.asc
--rwxr-xr-x   1 root root      5175 Mar 25 21:34 ./source/n/bind/bind.SlackBuild
--rw-r--r--   1 root root       280 Feb 18  2006 ./source/n/bind/bind.so_bsdcompat.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 26 06:54 ./source/n/bind/caching-example
--rw-r--r--   1 root root       195 May 18  2001 ./source/n/bind/caching-example/localhost.zone
--rw-r--r--   1 root root       681 Apr 13  2008 ./source/n/bind/caching-example/named.conf
--rw-r--r--   1 root root       433 Mar 26 06:54 ./source/n/bind/caching-example/named.local
--rw-r--r--   1 root root      2994 Jun 17  2010 ./source/n/bind/caching-example/named.root
--rw-r--r--   1 root root       514 May 23  2009 ./source/n/bind/doinst.sh.gz
--rw-r--r--   1 root root      3378 Jun 24  2010 ./source/n/bind/rc.bind
--rw-r--r--   1 root root       791 Feb 27  2002 ./source/n/bind/slack-desc
-drwxr-xr-x   4 root root      4096 Mar 31 02:53 ./source/n/bluez
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/bluez-firmware
--rw-r--r--   1 root root    262963 Apr 23  2007 ./source/n/bluez-firmware/bluez-firmware-1.2.tar.bz2
--rwxr-xr-x   1 root root      3541 Aug 10  2010 ./source/n/bluez-firmware/bluez-firmware.SlackBuild
--rw-r--r--   1 root root       832 Apr 23  2007 ./source/n/bluez-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  1 01:11 ./source/n/bluez-hcidump
--rw-r--r--   1 root root    117744 Jan 27 04:12 ./source/n/bluez-hcidump/bluez-hcidump-2.0.tar.xz
--rwxr-xr-x   1 root root      3818 Feb  1 01:11 ./source/n/bluez-hcidump/bluez-hcidump.SlackBuild
--rw-r--r--   1 root root       909 May  2  2010 ./source/n/bluez-hcidump/slack-desc
--rw-r--r--   1 root root       249 Mar 29 09:00 ./source/n/bluez/bluez-4.91.tar.sign
--rw-r--r--   1 root root    785488 Mar 29 09:00 ./source/n/bluez/bluez-4.91.tar.xz
--rwxr-xr-x   1 root root      6306 Mar 24 23:07 ./source/n/bluez/bluez.SlackBuild
-drwxr-xr-x   2 root root      4096 Dec 30  2009 ./source/n/bluez/config
--rw-r--r--   1 root root       128 Dec 30  2009 ./source/n/bluez/config/bluetooth.modprobe
--rw-r--r--   1 root root       213 Dec 30  2009 ./source/n/bluez/config/bluetooth.sh
--rw-r--r--   1 root root       497 Apr 20  2010 ./source/n/bluez/config/rc.bluetooth
--rw-r--r--   1 root root       390 Aug 27  2010 ./source/n/bluez/doinst.sh.gz
--rw-r--r--   1 root root      9998 Oct 30  2009 ./source/n/bluez/passkey-agent.c
-drwxr-xr-x   2 root root      4096 Mar 15  2010 ./source/n/bluez/patches
--rw-r--r--   1 root root       341 Nov  8 01:52 ./source/n/bluez/patches/bluez-dbus-config.patch.gz
--rw-r--r--   1 root root       446 Dec 30  2009 ./source/n/bluez/patches/bluez-run_udev_helper.patch.gz
--rw-r--r--   1 root root       433 Dec 30  2009 ./source/n/bluez/patches/bluez-unbreak_dell_mouse.patch.gz
--rw-r--r--   1 root root       803 May  2  2010 ./source/n/bluez/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/bootp
--rw-r--r--   1 root root       616 Jun  9  2006 ./source/n/bootp/_bootp.tar.gz
--rwxr-xr-x   1 root root      2801 Aug 10  2010 ./source/n/bootp/bootp.SlackBuild
--rw-r--r--   1 root root     23147 Feb 17  2006 ./source/n/bootp/bootp_2.4.3-15.diff.gz
--rw-r--r--   1 root root     89235 Mar 18  1999 ./source/n/bootp/bootp_2.4.3.orig.tar.gz
--rw-r--r--   1 root root       643 Feb 27  2002 ./source/n/bootp/bootptab.gz
--rw-r--r--   1 root root       876 Feb 11  2008 ./source/n/bootp/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 10  2010 ./source/n/bridge-utils
--rw-r--r--   1 root root     32657 Jan 14  2008 ./source/n/bridge-utils/bridge-utils-1.4.tar.gz
--rwxr-xr-x   1 root root      3590 Aug 10  2010 ./source/n/bridge-utils/bridge-utils.SlackBuild
--rw-r--r--   1 root root       305 Nov 29  2008 ./source/n/bridge-utils/bridge-utils.isbridge.diff.gz
--rw-r--r--   1 root root      1054 Apr 29  2007 ./source/n/bridge-utils/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/bsd-finger
--rw-r--r--   1 root root       273 Feb 26  2001 ./source/n/bsd-finger/bsd-finger-0.17.diff.gz
--rw-r--r--   1 root root     25521 Jul 31  2000 ./source/n/bsd-finger/bsd-finger-0.17.tar.gz
--rwxr-xr-x   1 root root      2222 May 19  2009 ./source/n/bsd-finger/bsd-finger.SlackBuild
--rw-r--r--   1 root root      1075 Apr 30  2007 ./source/n/bsd-finger/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 17  2009 ./source/n/ca-certificates
--rwxr-xr-x   1 root root      2707 Dec 17  2009 ./source/n/ca-certificates/ca-certificates.SlackBuild
--rw-r--r--   1 root root    226907 Aug 14  2009 ./source/n/ca-certificates/ca-certificates_20090814.tar.gz
--rw-r--r--   1 root root       718 Dec 17  2009 ./source/n/ca-certificates/cacerts-20090814-fixup_DESTDIR.diff.gz
--rw-r--r--   1 root root       393 Dec 17  2009 ./source/n/ca-certificates/cacerts-20090814-fixup_update-ca-certificates.diff.gz
--rw-r--r--   1 root root       320 Dec 17  2009 ./source/n/ca-certificates/cacerts-20090814-remove_debconf.diff.gz
--rw-r--r--   1 root root       308 Jul  2  2009 ./source/n/ca-certificates/doinst.sh.gz
--rw-r--r--   1 root root       895 Jul  2  2009 ./source/n/ca-certificates/slack-desc
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/n/crda
--rw-r--r--   1 root root     21666 May  3  2010 ./source/n/crda/crda-1.1.1.tar.bz2
--rwxr-xr-x   1 root root      3643 May  3  2010 ./source/n/crda/crda.SlackBuild
--rw-r--r--   1 root root       380 Feb 23  2009 ./source/n/crda/get_regdb.sh
--rw-r--r--   1 root root       870 Mar  9  2009 ./source/n/crda/slack-desc
--rw-r--r--   1 root root     68146 May  3  2010 ./source/n/crda/wireless-regdb-git_20100502.tar.bz2
-drwxr-xr-x   2 root root      4096 Mar 29 19:32 ./source/n/curl
--rw-r--r--   1 root root    127548 Mar 29 19:30 ./source/n/curl/cacert.pem.bz2
--rw-r--r--   1 root root   2256354 Feb 17 12:22 ./source/n/curl/curl-7.21.4.tar.bz2
--rw-r--r--   1 root root       198 Feb 17 12:22 ./source/n/curl/curl-7.21.4.tar.bz2.asc
--rwxr-xr-x   1 root root      4105 Mar 29 19:34 ./source/n/curl/curl.SlackBuild
--rw-r--r--   1 root root      1010 Feb 11  2008 ./source/n/curl/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/cyrus-sasl
--rw-r--r--   1 root root    906552 May 14  2009 ./source/n/cyrus-sasl/cyrus-sasl-2.1.23.tar.xz
--rwxr-xr-x   1 root root      3796 Aug 11  2010 ./source/n/cyrus-sasl/cyrus-sasl.SlackBuild
--rw-r--r--   1 root root       275 Jul 24  2005 ./source/n/cyrus-sasl/doinst.sh.gz
--rw-r--r--   1 root root       580 Jul 25  2005 ./source/n/cyrus-sasl/rc.saslauthd.gz
--rw-r--r--   1 root root       836 Apr 18  2005 ./source/n/cyrus-sasl/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  6 19:12 ./source/n/dhcp
--rw-r--r--   1 root root       337 Mar  3  2010 ./source/n/dhcp/dhclient-script.PATH.diff.gz
--rw-r--r--   1 root root   8797289 Apr  5 16:46 ./source/n/dhcp/dhcp-4.2.1-P1.tar.gz
--rw-r--r--   1 root root       481 Apr  5 16:46 ./source/n/dhcp/dhcp-4.2.1-P1.tar.gz.asc
--rwxr-xr-x   1 root root      1667 Apr  6 19:13 ./source/n/dhcp/dhcp-remove-bind-tarball.sh
--rwxr-xr-x   1 root root      4818 Apr  6 18:53 ./source/n/dhcp/dhcp.SlackBuild
--rw-r--r--   1 root root       309 Mar 24 13:39 ./source/n/dhcp/doinst.sh.gz
--rw-r--r--   1 root root      1099 Feb 27  2002 ./source/n/dhcp/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  7 23:05 ./source/n/dhcpcd
--rw-r--r--   1 root root       580 Dec 29 22:23 ./source/n/dhcpcd/50-ntp.conf.diff.gz
--rw-r--r--   1 root root       759 Mar  9  2009 ./source/n/dhcpcd/COPYRIGHT.gz
--rw-r--r--   1 root root     71055 Feb  4 14:57 ./source/n/dhcpcd/dhcpcd-5.2.11.tar.bz2
--rwxr-xr-x   1 root root      3811 Aug  7  2010 ./source/n/dhcpcd/dhcpcd.SlackBuild
--rw-r--r--   1 root root       265 Jul 24  2009 ./source/n/dhcpcd/doinst.sh.gz
--rw-r--r--   1 root root       900 Apr 10  2008 ./source/n/dhcpcd/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  7 20:19 ./source/n/dirmngr
--rw-r--r--   1 root root    481320 Jun 14  2010 ./source/n/dirmngr/dirmngr-1.1.0.tar.xz
--rwxr-xr-x   1 root root      3625 Jan 14 03:19 ./source/n/dirmngr/dirmngr.SlackBuild
--rw-r--r--   1 root root       952 Mar 15  2007 ./source/n/dirmngr/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 16 05:33 ./source/n/dnsmasq
--rw-r--r--   1 root root    334524 Feb 18 18:11 ./source/n/dnsmasq/dnsmasq-2.57.tar.xz
--rwxr-xr-x   1 root root      3574 Feb 11  2010 ./source/n/dnsmasq/dnsmasq.SlackBuild
--rw-r--r--   1 root root       543 Jan 22  2010 ./source/n/dnsmasq/dnsmasq.leasedir.diff.gz
--rw-r--r--   1 root root       376 Jan 22  2010 ./source/n/dnsmasq/doinst.sh.gz
--rw-r--r--   1 root root       265 Oct 16  2005 ./source/n/dnsmasq/rc.dnsmasq.gz
--rw-r--r--   1 root root       854 Oct 16  2005 ./source/n/dnsmasq/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/elm
--rw-r--r--   1 root root      4400 Aug 13  2009 ./source/n/elm/config.sh
--rwxr-xr-x   1 root root      2872 Aug 11  2010 ./source/n/elm/elm.SlackBuild
--rw-r--r--   1 root root    481431 Aug 18  2005 ./source/n/elm/elm2.5.8.tar.bz2
--rw-r--r--   1 root root       678 Mar  5  2002 ./source/n/elm/slack-desc
-drwxr-xr-x   2 root root      4096 May 17  2010 ./source/n/epic5
--rw-r--r--   1 root root    249636 Mar 16  2005 ./source/n/epic5/epic-help-current.tar.xz
--rw-r--r--   1 root root    711512 May  1  2010 ./source/n/epic5/epic5-1.1.2.tar.xz
--rwxr-xr-x   1 root root      3351 May 17  2010 ./source/n/epic5/epic5.SlackBuild
--rw-r--r--   1 root root       777 May 17  2010 ./source/n/epic5/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25 05:52 ./source/n/ethtool
--rw-r--r--   1 root root    144548 Nov 16 20:04 ./source/n/ethtool/ethtool-2.6.36.tar.xz
--rwxr-xr-x   1 root root      2558 Mar 25 05:54 ./source/n/ethtool/ethtool.SlackBuild
--rw-r--r--   1 root root       899 Apr 29  2007 ./source/n/ethtool/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  5 06:19 ./source/n/fetchmail
--rw-r--r--   1 root root   1244804 Dec 10 16:34 ./source/n/fetchmail/fetchmail-6.3.19.tar.xz
--rw-r--r--   1 root root       198 Dec 10 16:34 ./source/n/fetchmail/fetchmail-6.3.19.tar.xz.asc
--rwxr-xr-x   1 root root      3287 Apr  5 06:19 ./source/n/fetchmail/fetchmail.SlackBuild
--rw-r--r--   1 root root      1067 May  7  2007 ./source/n/fetchmail/slack-desc
-drwxr-xr-x   2 root root      4096 Apr  5 06:16 ./source/n/getmail
--rw-r--r--   1 root root    156907 Jun 30  2010 ./source/n/getmail/getmail-4.20.0.tar.gz
--rwxr-xr-x   1 root root      2052 May  3  2010 ./source/n/getmail/getmail.SlackBuild
--rw-r--r--   1 root root       821 Sep 10  2003 ./source/n/getmail/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  9 22:25 ./source/n/gnupg
--rw-r--r--   1 root root   3407075 Oct 18  2010 ./source/n/gnupg/gnupg-1.4.11.tar.bz2
--rw-r--r--   1 root root       158 Oct 18  2010 ./source/n/gnupg/gnupg-1.4.11.tar.bz2.sig
--rwxr-xr-x   1 root root      3402 Mar  9 22:30 ./source/n/gnupg/gnupg.SlackBuild
--rw-r--r--   1 root root       827 Feb 25  2003 ./source/n/gnupg/slack-desc.gnupg
-drwxr-xr-x   2 root root      4096 Jan 14 02:58 ./source/n/gnupg2
--rw-r--r--   1 root root   2738768 Jan 13 15:37 ./source/n/gnupg2/gnupg-2.0.17.tar.xz
--rwxr-xr-x   1 root root      5180 Jan 14 02:58 ./source/n/gnupg2/gnupg2.SlackBuild
--rw-r--r--   1 root root      1058 Feb 11  2008 ./source/n/gnupg2/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  7 20:34 ./source/n/gnutls
--rw-r--r--   1 root root   5099412 Feb 28 11:49 ./source/n/gnutls/gnutls-2.10.5.tar.xz
--rwxr-xr-x   1 root root      3953 Apr 10  2010 ./source/n/gnutls/gnutls.SlackBuild
--rw-r--r--   1 root root       950 Mar 16  2007 ./source/n/gnutls/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/gpa
--rw-r--r--   1 root root       270 Mar 16  2007 ./source/n/gpa/doinst.sh.gz
--rw-r--r--   1 root root    564252 Mar  6  2007 ./source/n/gpa/gpa-0.7.5.tar.bz2
--rwxr-xr-x   1 root root      3468 Aug 12  2010 ./source/n/gpa/gpa.SlackBuild
--rw-r--r--   1 root root       741 Mar 15  2007 ./source/n/gpa/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 14 03:04 ./source/n/gpgme
--rw-r--r--   1 root root    869470 Jan 11  2010 ./source/n/gpgme/gpgme-1.3.0.tar.bz2
--rw-r--r--   1 root root       315 Jan 11  2010 ./source/n/gpgme/gpgme-1.3.0.tar.bz2.sig
--rwxr-xr-x   1 root root      3334 Jan 14 03:05 ./source/n/gpgme/gpgme.SlackBuild
--rw-r--r--   1 root root       995 Mar 15  2007 ./source/n/gpgme/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/htdig
--rw-r--r--   1 root root       274 Apr  7  2007 ./source/n/htdig/doinst.sh.gz
--rw-r--r--   1 root root      3347 Apr  7  2007 ./source/n/htdig/htdig-3.2.0b6.diff.gz
--rw-r--r--   1 root root   2498246 Jul 13  2004 ./source/n/htdig/htdig-3.2.0b6.tar.bz2
--rwxr-xr-x   1 root root      4395 Aug 12  2010 ./source/n/htdig/htdig.SlackBuild
--rw-r--r--   1 root root       288 May  2  2007 ./source/n/htdig/htdig.conf.diff.gz
--rw-r--r--   1 root root       891 Apr  7  2007 ./source/n/htdig/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12 19:23 ./source/n/httpd
--rw-r--r--   1 root root      1409 May 18  2007 ./source/n/httpd/README
--rw-r--r--   1 root root       439 Jun  5  2007 ./source/n/httpd/config.layout.diff.gz
--rw-r--r--   1 root root       702 Jul 24  2008 ./source/n/httpd/doinst.sh.gz
--rw-r--r--   1 root root   4951247 Oct 18  2010 ./source/n/httpd/httpd-2.2.17.tar.bz2
--rw-r--r--   1 root root       833 Oct 18  2010 ./source/n/httpd/httpd-2.2.17.tar.bz2.asc
--rwxr-xr-x   1 root root      7004 Feb 12 19:25 ./source/n/httpd/httpd.SlackBuild
--rw-r--r--   1 root root       238 Feb 12 19:23 ./source/n/httpd/httpd.brigade_move.__noinline__.gcc451.diff.gz
--rw-r--r--   1 root root       214 May 18  2007 ./source/n/httpd/httpd.nossldefault.diff.gz
--rw-r--r--   1 root root       237 Feb 14  2008 ./source/n/httpd/httpd.runasapache.diff.gz
--rw-r--r--   1 root root       112 Nov 16 21:16 ./source/n/httpd/httpd.url
--rw-r--r--   1 root root       171 Nov  9 20:22 ./source/n/httpd/logrotate.httpd
--rw-r--r--   1 root root       703 May 27  2007 ./source/n/httpd/rc.httpd
--rw-r--r--   1 root root       970 May 18  2007 ./source/n/httpd/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/icmpinfo
--rw-r--r--   1 root root      2263 Apr 29  2007 ./source/n/icmpinfo/icmpinfo-1.11.diff.gz
--rw-r--r--   1 root root     11873 Aug 23  1995 ./source/n/icmpinfo/icmpinfo-1.11.tar.gz
--rwxr-xr-x   1 root root      2481 Aug 12  2010 ./source/n/icmpinfo/icmpinfo.SlackBuild
--rw-r--r--   1 root root       826 Apr 29  2007 ./source/n/icmpinfo/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25 21:45 ./source/n/idnkit
--rw-r--r--   1 root root    297016 Apr 14  2010 ./source/n/idnkit/idnkit-1.0-src.tar.xz
--rwxr-xr-x   1 root root      3996 Mar 25 21:45 ./source/n/idnkit/idnkit.SlackBuild
--rw-r--r--   1 root root       898 Mar 25 21:23 ./source/n/idnkit/slack-desc
-lrwxrwxrwx   1 root root         6 Aug 12  2010 ./source/n/imapd -> alpine
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/inetd
--rw-r--r--   1 root root      4876 Jun 30  2007 ./source/n/inetd/_inetd.tar.gz
--rw-r--r--   1 root root      6436 Feb  7  2001 ./source/n/inetd/inetd-OpenBSD-1.79.diff.gz
--rw-r--r--   1 root root     19053 Feb  6  2001 ./source/n/inetd/inetd-OpenBSD-1.79.tar.gz
--rwxr-xr-x   1 root root      2409 Aug 12  2010 ./source/n/inetd/inetd.SlackBuild
--rw-r--r--   1 root root       889 Sep  6  2003 ./source/n/inetd/inetd.loopingdos.diff.gz
--rw-r--r--   1 root root       910 Mar 22  2002 ./source/n/inetd/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 16 03:09 ./source/n/iproute2
--rw-r--r--   1 root root       305 Oct  4  2008 ./source/n/iproute2/doinst.sh.gz
--rw-r--r--   1 root root    388866 Jan  7 17:18 ./source/n/iproute2/iproute2-2.6.37.tar.bz2
--rw-r--r--   1 root root       198 Jan  7 17:18 ./source/n/iproute2/iproute2-2.6.37.tar.bz2.sig
--rwxr-xr-x   1 root root      4643 Mar 16 03:11 ./source/n/iproute2/iproute2.SlackBuild
--rw-r--r--   1 root root       502 Feb 25  2010 ./source/n/iproute2/iproute2.fixup_dbpath_and_iptablespath.diff.gz
--rw-r--r--   1 root root       937 Jun 12  2004 ./source/n/iproute2/slack-desc
-drwxr-xr-x   2 root root      4096 Oct 29 16:24 ./source/n/iptables
--rw-r--r--   1 root root    478007 Oct 29 15:33 ./source/n/iptables/iptables-1.4.10.tar.bz2
--rwxr-xr-x   1 root root      3102 Aug 14  2010 ./source/n/iptables/iptables.SlackBuild
--rw-r--r--   1 root root      1129 Sep  3  2006 ./source/n/iptables/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 11 03:47 ./source/n/iptraf-ng
--rw-r--r--   1 root root    574784 Mar 24  2010 ./source/n/iptraf-ng/iptraf-ng-1.0.2.tar.xz
--rwxr-xr-x   1 root root      3894 Mar 12 18:47 ./source/n/iptraf-ng/iptraf-ng.SlackBuild
--rw-r--r--   1 root root      1048 Mar 11 03:13 ./source/n/iptraf-ng/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25 05:49 ./source/n/iputils
--rw-r--r--   1 root root     94386 Oct  6  2010 ./source/n/iputils/iputils-s20101006.tar.bz2
--rwxr-xr-x   1 root root      3467 Mar 25 05:50 ./source/n/iputils/iputils.SlackBuild
--rw-r--r--   1 root root       881 Apr 30  2007 ./source/n/iputils/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/ipw2100-fw
--rw-r--r--   1 root root    177519 Mar  9  2008 ./source/n/ipw2100-fw/ipw2100-fw-1.3.tar.bz2
--rwxr-xr-x   1 root root      2935 May 19  2009 ./source/n/ipw2100-fw/ipw2100-fw.SlackBuild
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/n/ipw2200-fw
--rw-r--r--   1 root root    118152 May  3  2010 ./source/n/ipw2200-fw/ipw2200-fw-3.1.tar.xz
--rwxr-xr-x   1 root root      2807 May  3  2010 ./source/n/ipw2200-fw/ipw2200-fw.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr 22  2010 ./source/n/irssi
--rw-r--r--   1 root root       264 Jul 29  2009 ./source/n/irssi/doinst.sh.gz
--rw-r--r--   1 root root    948847 Apr 22  2010 ./source/n/irssi/irssi-0.8.15.tar.bz2
--rw-r--r--   1 root root        72 Apr 22  2010 ./source/n/irssi/irssi-0.8.15.tar.bz2.sig
--rwxr-xr-x   1 root root      4510 Jan 26 19:09 ./source/n/irssi/irssi.SlackBuild
--rw-r--r--   1 root root       371 Oct 12  2009 ./source/n/irssi/irssi.manpage_fix.diff.gz
--rw-r--r--   1 root root       402 Apr 22  2010 ./source/n/irssi/irssi.ssl_proxy.diff.gz
--rw-r--r--   1 root root       789 Dec 13  2003 ./source/n/irssi/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/iw
--rw-r--r--   1 root root     44999 Aug 12  2010 ./source/n/iw/iw-0.9.20.tar.bz2
--rwxr-xr-x   1 root root      2852 Aug 12  2010 ./source/n/iw/iw.SlackBuild
--rw-r--r--   1 root root       132 Apr  1  2009 ./source/n/iw/iw.info
--rw-r--r--   1 root root       883 Apr  1  2009 ./source/n/iw/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 20:59 ./source/n/iwlwifi-100-ucode
--rw-r--r--   1 root root    118392 Mar  3 20:44 ./source/n/iwlwifi-100-ucode/iwlwifi-100-ucode-39.31.5.1.tar.xz
--rwxr-xr-x   1 root root      2054 Mar  3 21:00 ./source/n/iwlwifi-100-ucode/iwlwifi-100-ucode.SlackBuild
--rw-r--r--   1 root root       951 Mar  3 21:00 ./source/n/iwlwifi-100-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/n/iwlwifi-1000-ucode
--rw-r--r--   1 root root    115416 May  3  2010 ./source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode-128.50.3.1.tar.xz
--rwxr-xr-x   1 root root      2049 May  3  2010 ./source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild
--rw-r--r--   1 root root       953 May  3  2010 ./source/n/iwlwifi-1000-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 13  2009 ./source/n/iwlwifi-3945-ucode
--rw-r--r--   1 root root     65335 Oct 21  2008 ./source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode-15.28.1.8.tar.bz2
--rw-r--r--   1 root root     65524 Jun 13  2009 ./source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode-15.32.2.9.tar.bz2
--rwxr-xr-x   1 root root      2043 Jun 13  2009 ./source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode.SlackBuild
--rw-r--r--   1 root root       987 Oct 24  2008 ./source/n/iwlwifi-3945-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Jul 15  2009 ./source/n/iwlwifi-4965-ucode
--rw-r--r--   1 root root     79274 Jul  4  2008 ./source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode-228.57.1.21.tar.bz2
--rw-r--r--   1 root root     79368 Jul  9  2009 ./source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode-228.61.2.24.tar.bz2
--rwxr-xr-x   1 root root      2043 May  8  2009 ./source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode.SlackBuild
--rw-r--r--   1 root root       987 Oct 24  2008 ./source/n/iwlwifi-4965-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 20:56 ./source/n/iwlwifi-5000-ucode
--rw-r--r--   1 root root    116124 Oct  6  2008 ./source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode-5.4.A.11.tar.xz
--rw-r--r--   1 root root    120484 Jun 13  2009 ./source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode-8.24.2.12.tar.xz
--rw-r--r--   1 root root    115692 Dec  3 01:05 ./source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode-8.83.5.1.tar.xz
--rwxr-xr-x   1 root root      2037 Jun 13  2009 ./source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode.SlackBuild
--rw-r--r--   1 root root       981 Oct 24  2008 ./source/n/iwlwifi-5000-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 13  2009 ./source/n/iwlwifi-5150-ucode
--rw-r--r--   1 root root    144943 Jun 13  2009 ./source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode-8.24.2.2.tar.bz2
--rwxr-xr-x   1 root root      2037 Jun 13  2009 ./source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode.SlackBuild
--rw-r--r--   1 root root       978 Jun 13  2009 ./source/n/iwlwifi-5150-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 21:35 ./source/n/iwlwifi-6000-ucode
--rw-r--r--   1 root root    134608 Jun  2  2010 ./source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode-9.221.4.1.tar.xz
--rwxr-xr-x   1 root root      2049 May  3  2010 ./source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild
--rw-r--r--   1 root root       953 May  3  2010 ./source/n/iwlwifi-6000-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  3 21:37 ./source/n/iwlwifi-6xxx-ucode
--rw-r--r--   1 root root    136400 Mar  3 20:44 ./source/n/iwlwifi-6xxx-ucode/iwlwifi-6000g2a-ucode-17.168.5.2.tar.xz
--rw-r--r--   1 root root    141832 Mar  3 20:44 ./source/n/iwlwifi-6xxx-ucode/iwlwifi-6000g2b-ucode-17.168.5.2.tar.xz
--rw-r--r--   1 root root    141460 Mar  3 20:44 ./source/n/iwlwifi-6xxx-ucode/iwlwifi-6050-ucode-41.28.5.1.tar.xz
--rwxr-xr-x   1 root root      2134 Mar  3 21:41 ./source/n/iwlwifi-6xxx-ucode/iwlwifi-6xxx-ucode.SlackBuild
--rw-r--r--   1 root root       953 Mar  3 21:38 ./source/n/iwlwifi-6xxx-ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 14 18:07 ./source/n/lftp
--rw-r--r--   1 root root       263 May 31  2009 ./source/n/lftp/doinst.sh.gz
--rw-r--r--   1 root root   1325468 Apr 11 09:24 ./source/n/lftp/lftp-4.2.2.tar.xz
--rwxr-xr-x   1 root root      3784 Aug  7  2010 ./source/n/lftp/lftp.SlackBuild
--rw-r--r--   1 root root      1037 Apr  6  2002 ./source/n/lftp/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 11  2010 ./source/n/libassuan
--rw-r--r--   1 root root    494384 Aug  9  2010 ./source/n/libassuan/libassuan-2.0.1.tar.bz2
--rw-r--r--   1 root root       158 Aug  9  2010 ./source/n/libassuan/libassuan-2.0.1.tar.bz2.sig
--rwxr-xr-x   1 root root      3358 Aug 11  2010 ./source/n/libassuan/libassuan.SlackBuild
--rw-r--r--   1 root root       712 Mar 15  2007 ./source/n/libassuan/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 11  2010 ./source/n/libgcrypt
--rw-r--r--   1 root root   1151877 Jul 13  2010 ./source/n/libgcrypt/libgcrypt-1.4.6.tar.bz2
--rw-r--r--   1 root root       158 Jul 13  2010 ./source/n/libgcrypt/libgcrypt-1.4.6.tar.bz2.sig
--rwxr-xr-x   1 root root      3806 Aug 11  2010 ./source/n/libgcrypt/libgcrypt.SlackBuild
--rw-r--r--   1 root root       705 Mar 15  2007 ./source/n/libgcrypt/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 11  2010 ./source/n/libgpg-error
--rw-r--r--   1 root root    436310 Jul 21  2010 ./source/n/libgpg-error/libgpg-error-1.9.tar.bz2
--rw-r--r--   1 root root       158 Jul 21  2010 ./source/n/libgpg-error/libgpg-error-1.9.tar.bz2.sig
--rwxr-xr-x   1 root root      3701 Aug 11  2010 ./source/n/libgpg-error/libgpg-error.SlackBuild
--rw-r--r--   1 root root       856 Mar 15  2007 ./source/n/libgpg-error/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  7 20:16 ./source/n/libksba
--rw-r--r--   1 root root    588323 Mar  1 11:47 ./source/n/libksba/libksba-1.2.0.tar.bz2
--rw-r--r--   1 root root       287 Mar  1 11:47 ./source/n/libksba/libksba-1.2.0.tar.bz2.sig
--rwxr-xr-x   1 root root      3484 Mar  6  2010 ./source/n/libksba/libksba.SlackBuild
--rw-r--r--   1 root root       790 Mar 15  2007 ./source/n/libksba/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 18  2010 ./source/n/links
--rw-r--r--   1 root root   3832651 Jan 30  2010 ./source/n/links/links-2.3pre1.tar.bz2
--rwxr-xr-x   1 root root      3561 Feb 18  2010 ./source/n/links/links.SlackBuild
--rw-r--r--   1 root root       902 Aug 19  2003 ./source/n/links/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12  2010 ./source/n/lynx
--rwxr-xr-x   1 root root      4439 Feb 12  2010 ./source/n/lynx/lynx.SlackBuild
--rw-r--r--   1 root root       355 Dec  3  2009 ./source/n/lynx/lynx.cfg.diff.gz
--rw-r--r--   1 root root       573 Dec  3  2009 ./source/n/lynx/lynx.path.diff.gz
--rw-r--r--   1 root root   2090248 Dec  2  2009 ./source/n/lynx/lynx2.8.7.tar.xz
--rw-r--r--   1 root root       953 Feb 27  2002 ./source/n/lynx/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 10  2009 ./source/n/mailx
--rw-r--r--   1 root root       281 Sep 20  2006 ./source/n/mailx/doinst.sh.gz
--rw-r--r--   1 root root    271482 Jul 28  2008 ./source/n/mailx/mailx-12.4.tar.bz2
--rwxr-xr-x   1 root root      3422 Aug 12  2010 ./source/n/mailx/mailx.SlackBuild
--rw-r--r--   1 root root      1023 Apr 11  2008 ./source/n/mailx/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 14 03:39 ./source/n/mcabber
--rw-r--r--   1 root root    554682 Dec  1 20:52 ./source/n/mcabber/mcabber-0.10.1.tar.bz2
--rwxr-xr-x   1 root root      3928 Apr 22  2010 ./source/n/mcabber/mcabber.SlackBuild
--rw-r--r--   1 root root       876 Jun 14  2007 ./source/n/mcabber/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/metamail
--rw-r--r--   1 root root    125480 Feb 18  1994 ./source/n/metamail/metamail-2.7.tar.xz
--rwxr-xr-x   1 root root      4578 Aug 12  2010 ./source/n/metamail/metamail.SlackBuild
--rw-r--r--   1 root root     20532 Apr 23  2009 ./source/n/metamail/metamail.automake.diff.xz
--rw-r--r--   1 root root       284 Aug 12  2010 ./source/n/metamail/metamail.uue.getline.diff.gz
--rw-r--r--   1 root root    202588 Mar  8  2008 ./source/n/metamail/metamail_2.7-54.diff.xz
--rw-r--r--   1 root root       927 Mar 23  2002 ./source/n/metamail/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 25 05:16 ./source/n/mtr
--rw-r--r--   1 root root    208168 Jul 13  2010 ./source/n/mtr/mtr-0.80.tar.xz
--rwxr-xr-x   1 root root      3394 Mar 25 05:19 ./source/n/mtr/mtr.SlackBuild
--rw-r--r--   1 root root       779 Jun  4  2007 ./source/n/mtr/slack-desc
-drwxr-xr-x   2 root root      4096 Oct 25 17:54 ./source/n/mutt
--rw-r--r--   1 root root       264 Jun  1  2002 ./source/n/mutt/doinst.sh.gz
--rw-r--r--   1 root root   1810848 Sep 15  2010 ./source/n/mutt/mutt-1.5.21.tar.xz
--rwxr-xr-x   1 root root      4096 Oct 25 17:55 ./source/n/mutt/mutt.SlackBuild
--rw-r--r--   1 root root       466 Oct 25 17:51 ./source/n/mutt/mutt.gpgme.diff.gz
--rw-r--r--   1 root root       866 Feb 11  2008 ./source/n/mutt/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/nc
--rw-r--r--   1 root root     10439 Mar 14  2002 ./source/n/nc/nc-110-21.diff.gz
--rwxr-xr-x   1 root root      2668 Aug 12  2010 ./source/n/nc/nc.SlackBuild
--rw-r--r--   1 root root       641 May 28  2002 ./source/n/nc/nc.diff.gz
--rw-r--r--   1 root root     75267 May 28  2002 ./source/n/nc/nc110.tgz
--rw-r--r--   1 root root      1081 May 28  2002 ./source/n/nc/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 21 01:40 ./source/n/ncftp
--rw-r--r--   1 root root    454388 Jan 18 03:52 ./source/n/ncftp/ncftp-3.2.5-src.tar.bz2
--rwxr-xr-x   1 root root      3575 May  3  2010 ./source/n/ncftp/ncftp.SlackBuild
--rw-r--r--   1 root root       793 Feb 11  2008 ./source/n/ncftp/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 19 22:11 ./source/n/net-snmp
--rw-r--r--   1 root root       344 Jun 19  2007 ./source/n/net-snmp/doinst.sh.gz
--rw-r--r--   1 root root   3499040 Jan  3 23:45 ./source/n/net-snmp/net-snmp-5.6.1.tar.xz
--rwxr-xr-x   1 root root      5500 Mar 19 22:15 ./source/n/net-snmp/net-snmp.SlackBuild
--rw-r--r--   1 root root       341 Dec  6 13:48 ./source/n/net-snmp/net-snmp.net-snmp-create-v3-user.etc.snmpd.conf.diff.gz
--rw-r--r--   1 root root       895 Jun 19  2007 ./source/n/net-snmp/rc.snmpd
--rw-r--r--   1 root root       910 Apr 16  2007 ./source/n/net-snmp/slack-desc
--rw-r--r--   1 root root      4909 Apr 16  2007 ./source/n/net-snmp/snmpd.conf.gz
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/net-tools
--rw-r--r--   1 root root      1334 Apr 29  2007 ./source/n/net-tools/ipmask.8
--rw-r--r--   1 root root      2216 Aug 15  1994 ./source/n/net-tools/ipmask.c
--rw-r--r--   1 root root    198520 Apr 15  2001 ./source/n/net-tools/net-tools-1.60.tar.bz2
--rwxr-xr-x   1 root root      4374 Aug 12  2010 ./source/n/net-tools/net-tools.SlackBuild
--rw-r--r--   1 root root       650 Mar 22  2001 ./source/n/net-tools/net-tools.diff.gz
--rw-r--r--   1 root root       532 Aug 12  2010 ./source/n/net-tools/net-tools.mii-tool.string.diff.gz
--rw-r--r--   1 root root       272 Aug 12  2010 ./source/n/net-tools/net-tools.struct.x25_address.gcc4.diff.gz
--rw-r--r--   1 root root       299 Aug 12  2010 ./source/n/net-tools/net-tools.switch.default.gcc4.diff.gz
--rw-r--r--   1 root root    214620 Mar 16  2009 ./source/n/net-tools/net-tools_1.60-23.diff.gz
--rw-r--r--   1 root root       909 Apr 29  2007 ./source/n/net-tools/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  9  2010 ./source/n/netatalk
--rw-r--r--   1 root root         0 Feb  2  2003 ./source/n/netatalk/afppasswd
--rw-r--r--   1 root root       334 May 31  2009 ./source/n/netatalk/doinst.sh.gz
--rw-r--r--   1 root root    776632 Nov 11  2009 ./source/n/netatalk/netatalk-2.0.5.tar.xz
--rwxr-xr-x   1 root root      4694 Feb  9  2010 ./source/n/netatalk/netatalk.SlackBuild
--rw-r--r--   1 root root       320 May 31  2009 ./source/n/netatalk/netatalk.afpdconf.diff.gz
--rw-r--r--   1 root root       292 Oct 28  2004 ./source/n/netatalk/netatalk.etc2ps.diff.gz
--rw-r--r--   1 root root       486 May 31  2009 ./source/n/netatalk/netatalk.without_xfs.diff.gz
--rw-r--r--   1 root root      1032 Feb  2  2003 ./source/n/netatalk/rc.atalk.new
--rw-r--r--   1 root root      1040 Feb  2  2003 ./source/n/netatalk/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netdate
--rwxr-xr-x   1 root root      2421 Aug 12  2010 ./source/n/netdate/netdate.SlackBuild
--rw-r--r--   1 root root      3766 Aug  4  1999 ./source/n/netdate/netdate.diff.gz
--rw-r--r--   1 root root       164 Feb 26  2001 ./source/n/netdate/netdate.diff2.gz
--rw-r--r--   1 root root      6755 Aug 15  1996 ./source/n/netdate/netdate.tar.gz
--rw-r--r--   1 root root      1107 Apr 30  2007 ./source/n/netdate/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/netkit-bootparamd
--rw-r--r--   1 root root     13934 Jul 31  2000 ./source/n/netkit-bootparamd/netkit-bootparamd-0.17.tar.gz
--rwxr-xr-x   1 root root      2442 Aug 12  2010 ./source/n/netkit-bootparamd/netkit-bootparamd.SlackBuild
--rw-r--r--   1 root root       986 Apr 30  2007 ./source/n/netkit-bootparamd/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/netkit-ftp
--rw-r--r--   1 root root     53934 Jul 31  2000 ./source/n/netkit-ftp/netkit-ftp-0.17.tar.gz
--rwxr-xr-x   1 root root      2281 Aug 12  2010 ./source/n/netkit-ftp/netkit-ftp.SlackBuild
--rw-r--r--   1 root root       905 Apr 30  2007 ./source/n/netkit-ftp/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/netkit-ntalk
--rw-r--r--   1 root root       842 Jun  8  2000 ./source/n/netkit-ntalk/netkit-ntalk-0.11.diff.gz
--rw-r--r--   1 root root     30632 Jun  8  2000 ./source/n/netkit-ntalk/netkit-ntalk-0.11.tar.gz
--rw-r--r--   1 root root       230 Feb 26  2001 ./source/n/netkit-ntalk/netkit-ntalk-0.17.diff.gz
--rw-r--r--   1 root root     37396 Jul 31  2000 ./source/n/netkit-ntalk/netkit-ntalk-0.17.tar.gz
--rwxr-xr-x   1 root root      3177 Aug 12  2010 ./source/n/netkit-ntalk/netkit-ntalk.SlackBuild
--rw-r--r--   1 root root       551 Nov  4  2004 ./source/n/netkit-ntalk/ntalk-0.17-slackware-alt-talkd.patch.gz
--rw-r--r--   1 root root       941 May  7  2007 ./source/n/netkit-ntalk/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-routed
--rw-r--r--   1 root root       305 Feb 26  2001 ./source/n/netkit-routed/netkit-routed-0.17.diff.gz
--rw-r--r--   1 root root     36435 Jul 31  2000 ./source/n/netkit-routed/netkit-routed-0.17.tar.gz
--rwxr-xr-x   1 root root      2665 Aug 12  2010 ./source/n/netkit-routed/netkit-routed.SlackBuild
--rw-r--r--   1 root root      8075 Dec 26  2000 ./source/n/netkit-routed/routed.18.candidate.final.patch.gz
--rw-r--r--   1 root root      1100 Apr 29  2007 ./source/n/netkit-routed/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-rsh
--rw-r--r--   1 root root     58268 Jul 31  2000 ./source/n/netkit-rsh/netkit-rsh-0.17.tar.gz
--rwxr-xr-x   1 root root      3079 Aug 12  2010 ./source/n/netkit-rsh/netkit-rsh.SlackBuild
--rw-r--r--   1 root root       884 Aug 12  2010 ./source/n/netkit-rsh/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-rusers
--rw-r--r--   1 root root       221 Feb 26  2001 ./source/n/netkit-rusers/netkit-rusers-0.17.diff.gz
--rw-r--r--   1 root root     22063 Jul 31  2000 ./source/n/netkit-rusers/netkit-rusers-0.17.tar.gz
--rwxr-xr-x   1 root root      2648 Aug 12  2010 ./source/n/netkit-rusers/netkit-rusers.SlackBuild
--rw-r--r--   1 root root      1160 Apr 30  2007 ./source/n/netkit-rusers/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-rwall
--rw-r--r--   1 root root     11861 Jul 31  2000 ./source/n/netkit-rwall/netkit-rwall-0.17.tar.gz
--rwxr-xr-x   1 root root      2468 Aug 12  2010 ./source/n/netkit-rwall/netkit-rwall.SlackBuild
--rw-r--r--   1 root root       925 Apr 30  2007 ./source/n/netkit-rwall/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-rwho
--rw-r--r--   1 root root       159 Feb 26  2001 ./source/n/netkit-rwho/netkit-rwho-0.17.diff.gz
--rw-r--r--   1 root root     20610 Jul 31  2000 ./source/n/netkit-rwho/netkit-rwho-0.17.tar.gz
--rwxr-xr-x   1 root root      2730 Aug 12  2010 ./source/n/netkit-rwho/netkit-rwho.SlackBuild
--rw-r--r--   1 root root       225 Dec 14  2008 ./source/n/netkit-rwho/rwhod_getloadavg.diff.gz
--rw-r--r--   1 root root      1153 Apr 30  2007 ./source/n/netkit-rwho/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netkit-timed
--rw-r--r--   1 root root       243 Jan  7  2001 ./source/n/netkit-timed/netkit-timed-0.17.diff.gz
--rw-r--r--   1 root root     48655 Jul 31  2000 ./source/n/netkit-timed/netkit-timed-0.17.tar.gz
--rwxr-xr-x   1 root root      2530 Aug 12  2010 ./source/n/netkit-timed/netkit-timed.SlackBuild
--rw-r--r--   1 root root       870 Apr 30  2007 ./source/n/netkit-timed/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netpipes
--rw-r--r--   1 root root       365 Feb  7  1999 ./source/n/netpipes/_netpipes.tar.gz
--rw-r--r--   1 root root     75276 Jan 30  1999 ./source/n/netpipes/netpipes-4.2-export.tar.gz
--rwxr-xr-x   1 root root      2509 Aug 12  2010 ./source/n/netpipes/netpipes.SlackBuild
--rw-r--r--   1 root root      1019 Feb 11  2008 ./source/n/netpipes/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/netwatch
--rw-r--r--   1 root root    187936 Mar  4  2009 ./source/n/netwatch/netwatch-1.3.0-1.tar.gz
--rwxr-xr-x   1 root root      3403 Aug 12  2010 ./source/n/netwatch/netwatch.SlackBuild
--rw-r--r--   1 root root       491 Mar  4  2009 ./source/n/netwatch/netwatch.makefile.diff.gz
--rw-r--r--   1 root root       233 Mar  4  2009 ./source/n/netwatch/netwatch.phonemyself.diff.gz
--rw-r--r--   1 root root       765 Mar  4  2009 ./source/n/netwatch/slack-desc
-drwxr-xr-x   4 root root      4096 Dec  6  2008 ./source/n/network-scripts
--rw-r--r--   1 root root      3038 May 20  2005 ./source/n/network-scripts/README.rc.inet1
--rw-r--r--   1 root root       485 Apr 26  2007 ./source/n/network-scripts/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Aug  5  2009 ./source/n/network-scripts/manpages
--rw-r--r--   1 root root      3299 Aug  5  2009 ./source/n/network-scripts/manpages/rc.inet1.8
--rw-r--r--   1 root root      5525 Aug  5  2009 ./source/n/network-scripts/manpages/rc.inet1.conf.5
--rwxr-xr-x   1 root root      2465 Jan 18  2010 ./source/n/network-scripts/network-scripts.SlackBuild
-drwxr-xr-x   2 root root      4096 Aug 26  2009 ./source/n/network-scripts/scripts
--rw-r--r--   1 root root        21 Jan 28  1999 ./source/n/network-scripts/scripts/HOSTNAME
--rw-r--r--   1 root root        27 Jul  7  1994 ./source/n/network-scripts/scripts/host.conf
--rw-r--r--   1 root root       627 Aug 27  2003 ./source/n/network-scripts/scripts/hosts
--rw-r--r--   1 root root       293 Nov 26  1993 ./source/n/network-scripts/scripts/hosts.allow
--rw-r--r--   1 root root       296 Nov 26  1993 ./source/n/network-scripts/scripts/hosts.deny
--rw-r--r--   1 root root       320 Feb  9  1998 ./source/n/network-scripts/scripts/hosts.equiv
--rw-r--r--   1 root root     20016 Dec  7  2008 ./source/n/network-scripts/scripts/netconfig
--rw-r--r--   1 root root       233 Oct  7  1999 ./source/n/network-scripts/scripts/networks
--rw-r--r--   1 root root        24 Feb  9  1998 ./source/n/network-scripts/scripts/nntpserver
--rw-r--r--   1 root root      5748 Feb 10  2002 ./source/n/network-scripts/scripts/protocols
--rw-r--r--   1 root root      9600 Aug 26  2009 ./source/n/network-scripts/scripts/rc.inet1
--rw-r--r--   1 root root      4752 Aug 25  2009 ./source/n/network-scripts/scripts/rc.inet1.conf
--rw-r--r--   1 root root      4847 Sep 17  2007 ./source/n/network-scripts/scripts/rc.inet2
--rw-r--r--   1 root root      2684 Dec  3  2008 ./source/n/network-scripts/scripts/rc.ip_forward
--rw-r--r--   1 root root        19 Jan 28  1999 ./source/n/network-scripts/scripts/resolv.conf
--rw-r--r--   1 root root       349 Feb 18  2003 ./source/n/network-scripts/scripts/setup.netconfig
--rw-r--r--   1 root root      1049 Feb 11  2008 ./source/n/network-scripts/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/netwrite
--rw-r--r--   1 root root       266 Feb 26  2001 ./source/n/netwrite/netwrite-0.17.diff.gz
--rw-r--r--   1 root root     16110 Jul 31  2000 ./source/n/netwrite/netwrite-0.17.tar.gz
--rwxr-xr-x   1 root root      2767 Aug 12  2010 ./source/n/netwrite/netwrite.SlackBuild
--rw-r--r--   1 root root      1019 Apr 30  2007 ./source/n/netwrite/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/newspost
--rw-r--r--   1 root root     61412 May  5  2003 ./source/n/newspost/newspost-2.1.1.tar.gz
--rwxr-xr-x   1 root root      2414 Aug 12  2010 ./source/n/newspost/newspost.SlackBuild
--rw-r--r--   1 root root       970 Jul 18  2003 ./source/n/newspost/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 23:41 ./source/n/nfs-utils
--rw-r--r--   1 root root       651 Mar 21 23:41 ./source/n/nfs-utils/_nfs-utils.tar.gz
--rw-r--r--   1 root root       515 Mar 21 23:39 ./source/n/nfs-utils/doinst.sh.gz
--rw-r--r--   1 root root       248 Sep 28  2010 ./source/n/nfs-utils/nfs-utils-1.2.3.tar.sign
--rw-r--r--   1 root root    533952 Sep 28  2010 ./source/n/nfs-utils/nfs-utils-1.2.3.tar.xz
--rwxr-xr-x   1 root root      4813 Mar 21 23:41 ./source/n/nfs-utils/nfs-utils.SlackBuild
--rw-r--r--   1 root root       255 Mar 31  2008 ./source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff.gz
--rw-r--r--   1 root root      2449 Mar 18 20:44 ./source/n/nfs-utils/rc.nfsd
--rw-r--r--   1 root root       782 Feb  2  2003 ./source/n/nfs-utils/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 10 03:46 ./source/n/nmap
--rw-r--r--   1 root root  15235852 Feb 11 23:17 ./source/n/nmap/nmap-5.51.tar.xz
--rwxr-xr-x   1 root root      4845 Mar 10 03:50 ./source/n/nmap/nmap.SlackBuild
--rw-r--r--   1 root root       302 Apr 30  2009 ./source/n/nmap/nmap.ndiff.mandir.diff.gz
--rw-r--r--   1 root root      1107 Mar 29  2002 ./source/n/nmap/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 12  2009 ./source/n/nn
--rw-r--r--   1 root root      4844 Jul  2  2001 ./source/n/nn/NNTP.gz
--rw-r--r--   1 root root       315 Jun 27  2006 ./source/n/nn/doinst.sh.gz
--rw-r--r--   1 root root       509 Nov 11  2009 ./source/n/nn/m-x86_64.h.gz
--rw-r--r--   1 root root    352656 Nov 18  2005 ./source/n/nn/nn-6.7.3.tar.bz2
--rwxr-xr-x   1 root root      4072 Nov 12  2009 ./source/n/nn/nn.SlackBuild
--rw-r--r--   1 root root       287 Jun 27  2006 ./source/n/nn/nn.badnntphost.diff.gz
--rw-r--r--   1 root root      1349 Mar 17  2009 ./source/n/nn/nn.destdir.diff.gz
--rw-r--r--   1 root root      1281 Nov 11  2009 ./source/n/nn/nn.diff.gz
--rw-r--r--   1 root root        53 Jun 27  2006 ./source/n/nn/nntpserver.gz
--rw-r--r--   1 root root       897 Mar 29  2002 ./source/n/nn/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 26 00:14 ./source/n/ntp
--rw-r--r--   1 root root       314 May  7  2007 ./source/n/ntp/doinst.sh.gz
--rw-r--r--   1 root root   2786388 Jan  4 02:38 ./source/n/ntp/ntp-4.2.6p3.tar.xz
--rwxr-xr-x   1 root root      4676 Apr 22  2010 ./source/n/ntp/ntp.SlackBuild
--rw-r--r--   1 root root      1867 Jan 26 00:14 ./source/n/ntp/ntp.conf
--rw-r--r--   1 root root        22 Oct  7  1999 ./source/n/ntp/ntp.keys
--rw-r--r--   1 root root       269 Apr 22  2010 ./source/n/ntp/ntp.nano.diff.gz
--rw-r--r--   1 root root       804 Apr 22  2010 ./source/n/ntp/rc.ntpd
--rw-r--r--   1 root root       986 Feb 27  2002 ./source/n/ntp/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 25  2009 ./source/n/obex-data-server
--rw-r--r--   1 root root       297 Nov 25  2009 ./source/n/obex-data-server/doinst.sh.gz
--rw-r--r--   1 root root    148937 Nov 24  2009 ./source/n/obex-data-server/obex-data-server-0.4.5.tar.bz2
--rwxr-xr-x   1 root root      3646 Nov  6 20:40 ./source/n/obex-data-server/obex-data-server.SlackBuild
--rw-r--r--   1 root root       897 Nov 25  2009 ./source/n/obex-data-server/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 13  2009 ./source/n/obexfs
--rw-r--r--   1 root root     68953 Nov 24  2009 ./source/n/obexfs/obexfs-0.12.tar.bz2
--rwxr-xr-x   1 root root      3359 May  2  2010 ./source/n/obexfs/obexfs.SlackBuild
--rw-r--r--   1 root root       876 Nov 25  2009 ./source/n/obexfs/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 17  2010 ./source/n/obexftp
--rw-r--r--   1 root root    402552 Feb 17  2009 ./source/n/obexftp/obexftp-0.23.tar.bz2
--rwxr-xr-x   1 root root      4793 Jan 26 19:11 ./source/n/obexftp/obexftp.SlackBuild
--rw-r--r--   1 root root       281 Apr 19  2010 ./source/n/obexftp/ruby_rstringlen.diff.gz
--rw-r--r--   1 root root       924 May 18  2007 ./source/n/obexftp/slack-desc
-drwxr-xr-x   2 root root      4096 Jan  1 23:03 ./source/n/openldap-client
--rw-r--r--   1 root root       275 Jan 17  2006 ./source/n/openldap-client/doinst.sh.gz
--rw-r--r--   1 root root   3413876 Jun 29  2010 ./source/n/openldap-client/openldap-2.4.23.tar.xz
--rwxr-xr-x   1 root root      4558 Feb 12  2010 ./source/n/openldap-client/openldap-client.SlackBuild
--rw-r--r--   1 root root      1027 Jan 18  2006 ./source/n/openldap-client/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 28  2009 ./source/n/openobex
--rw-r--r--   1 root root    290891 Feb  8  2009 ./source/n/openobex/openobex-1.5.tar.bz2
--rwxr-xr-x   1 root root      3972 May  2  2010 ./source/n/openobex/openobex.SlackBuild
--rw-r--r--   1 root root       997 May 12  2007 ./source/n/openobex/slack-desc
-drwxr-xr-x   2 root root      4096 Feb  4 16:30 ./source/n/openssh
--rw-r--r--   1 root root       470 Sep 28  2006 ./source/n/openssh/doinst.sh.gz
--rw-r--r--   1 root root   1113798 Feb  4 01:02 ./source/n/openssh/openssh-5.8p1.tar.gz
--rw-r--r--   1 root root       188 Feb  4 01:02 ./source/n/openssh/openssh-5.8p1.tar.gz.asc
--rwxr-xr-x   1 root root      5058 Feb  4 16:32 ./source/n/openssh/openssh.SlackBuild
--rw-r--r--   1 root root      1600 Jan 27 21:54 ./source/n/openssh/rc.sshd
--rw-r--r--   1 root root      1134 Mar  7  2002 ./source/n/openssh/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 22 19:17 ./source/n/openssl
--rw-r--r--   1 root root      1737 Feb 10 19:03 ./source/n/openssl/certwatch.gz
--rw-r--r--   1 root root       281 Jun 13  2007 ./source/n/openssl/doinst.sh-openssl-solibs.gz
--rw-r--r--   1 root root       433 Mar 22 18:29 ./source/n/openssl/doinst.sh-openssl.gz
--rw-r--r--   1 root root   2419180 Feb  8 17:21 ./source/n/openssl/openssl-0.9.8r.tar.xz
--rwxr-xr-x   1 root root      6990 Mar 22 18:29 ./source/n/openssl/openssl.SlackBuild
--rw-r--r--   1 root root       501 Jan 17  2006 ./source/n/openssl/openssl.optsx86.diff.gz
--rw-r--r--   1 root root       283 Oct 13  2005 ./source/n/openssl/openssl.soname.diff.gz
--rw-r--r--   1 root root      1019 Apr  6  2002 ./source/n/openssl/slack-desc.openssl
--rw-r--r--   1 root root      1143 Mar 23  2002 ./source/n/openssl/slack-desc.openssl-solibs
-drwxr-xr-x   2 root root      4096 Mar 10 18:34 ./source/n/openvpn
--rw-r--r--   1 root root      1375 Jun 10  2007 ./source/n/openvpn/README
--rw-r--r--   1 root root    863726 Nov  9 13:51 ./source/n/openvpn/openvpn-2.1.4.tar.gz
--rw-r--r--   1 root root       189 Nov  9 13:51 ./source/n/openvpn/openvpn-2.1.4.tar.gz.asc
--rwxr-xr-x   1 root root      4693 Mar 29 20:07 ./source/n/openvpn/openvpn.SlackBuild
--rw-r--r--   1 root root      6942 Jun 12  2007 ./source/n/openvpn/openvpn.conf.sample
--rw-r--r--   1 root root       888 Jun 10  2007 ./source/n/openvpn/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 14 19:39 ./source/n/php
--rw-r--r--   1 root root       152 Dec 23 22:04 ./source/n/php/doinst.sh.gz
--rwxr-xr-x   1 root root        60 Mar 17 18:06 ./source/n/php/fetch-php.sh
--rw-r--r--   1 root root      1022 Oct  2  2009 ./source/n/php/mod_php.conf.example
-drwxr-xr-x   2 root root      4096 May  7  2008 ./source/n/php/pear
--rw-r--r--   1 root root   8804248 Mar 17 12:30 ./source/n/php/php-5.3.6.tar.xz
--rwxr-xr-x   1 root root      8640 Apr 14 19:40 ./source/n/php/php.SlackBuild
--rw-r--r--   1 root root       555 Apr  2 03:43 ./source/n/php/php.ini-development.diff.gz
--rw-r--r--   1 root root       321 Apr 14 19:39 ./source/n/php/php.session.save_path.diff.gz
--rw-r--r--   1 root root       830 Dec  9  2005 ./source/n/php/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/pidentd
--rw-r--r--   1 root root       296 Apr  5  2002 ./source/n/pidentd/doinst.sh.gz
--rw-r--r--   1 root root    145505 Oct 18  2005 ./source/n/pidentd/pidentd-3.0.19.tar.gz
--rw-r--r--   1 root root       185 Oct 18  2005 ./source/n/pidentd/pidentd-3.0.19.tar.gz.sig
--rwxr-xr-x   1 root root      3112 Aug 12  2010 ./source/n/pidentd/pidentd.SlackBuild
--rw-r--r--   1 root root       893 Jun 13  2004 ./source/n/pidentd/pidentd.conf.diff.gz
--rw-r--r--   1 root root      1036 Apr  6  2002 ./source/n/pidentd/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 14 03:01 ./source/n/pinentry
--rw-r--r--   1 root root    348208 Dec 16 17:05 ./source/n/pinentry/pinentry-0.8.1.tar.xz
--rwxr-xr-x   1 root root      4087 Mar  6  2010 ./source/n/pinentry/pinentry.SlackBuild
--rw-r--r--   1 root root       781 Mar 15  2007 ./source/n/pinentry/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/popa3d
--rw-r--r--   1 root root       164 Sep 30  2006 ./source/n/popa3d/doinst.sh.gz
--rw-r--r--   1 root root     32848 May 23  2006 ./source/n/popa3d/popa3d-1.0.2.tar.gz
--rw-r--r--   1 root root       331 May 23  2006 ./source/n/popa3d/popa3d-1.0.2.tar.gz.sign
--rwxr-xr-x   1 root root      2795 Aug 12  2010 ./source/n/popa3d/popa3d.SlackBuild
--rw-r--r--   1 root root       769 Mar 12  2006 ./source/n/popa3d/popa3d.diff.gz
--rw-r--r--   1 root root      1002 Feb 21  2004 ./source/n/popa3d/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/portmap
--rw-r--r--   1 root root       271 Sep 21  2006 ./source/n/portmap/doinst.sh.gz
--rw-r--r--   1 root root     20092 May 11  2007 ./source/n/portmap/portmap-6.0.tar.bz2
--rwxr-xr-x   1 root root      3151 Aug 12  2010 ./source/n/portmap/portmap.SlackBuild
--rw-r--r--   1 root root       217 May 17  2007 ./source/n/portmap/portmap.lwrap.needs.lnsl.diff.gz
--rw-r--r--   1 root root       610 May 17  2007 ./source/n/portmap/rc.rpc.gz
--rw-r--r--   1 root root       987 Mar 22  2002 ./source/n/portmap/slack-desc
-drwxr-xr-x   2 root root      4096 Nov 18  2009 ./source/n/ppp
--rw-r--r--   1 root root       324 Feb 23  2004 ./source/n/ppp/doinst.sh.gz
--rw-r--r--   1 root root      3620 Sep 30  1999 ./source/n/ppp/options.new.gz
--rw-r--r--   1 root root    556120 Nov 17  2009 ./source/n/ppp/ppp-2.4.5.tar.bz2
--rwxr-xr-x   1 root root      5443 Feb 12  2010 ./source/n/ppp/ppp.SlackBuild
--rw-r--r--   1 root root       401 Feb 23  2004 ./source/n/ppp/ppp.slack.diff.gz
--rw-r--r--   1 root root       348 May 20  2002 ./source/n/ppp/pppsetup-1.98.backupfiles.diff.gz
--rw-r--r--   1 root root      1303 May 20  2002 ./source/n/ppp/pppsetup-1.98.moredevs.diff.gz
--rw-r--r--   1 root root       270 Oct 21  2000 ./source/n/ppp/pppsetup-1.98.pppoff.diff.gz
--rw-r--r--   1 root root     11656 Jun 18  2000 ./source/n/ppp/pppsetup-1.98.slack.diff.gz
--rw-r--r--   1 root root     78697 Mar  4  1998 ./source/n/ppp/pppsetup-1.98.tar.gz
--rw-r--r--   1 root root       812 Jul 25  2005 ./source/n/ppp/radius.msdict.gz
--rw-r--r--   1 root root    119071 Feb  3  2002 ./source/n/ppp/radiusclient-0.3.2.tar.bz2
--rw-r--r--   1 root root       372 Jul 25  2005 ./source/n/ppp/realms.gz
--rw-r--r--   1 root root       129 Jul 25  2005 ./source/n/ppp/servers.gz
--rw-r--r--   1 root root       905 Mar  7  2002 ./source/n/ppp/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/procmail
--rw-r--r--   1 root root       294 Aug 21  2001 ./source/n/procmail/_procmail.tar.gz
--rw-r--r--   1 root root    226817 Sep 11  2001 ./source/n/procmail/procmail-3.22.tar.gz
--rw-r--r--   1 root root       366 Sep 11  2001 ./source/n/procmail/procmail-3.22.tar.gz.sig
--rwxr-xr-x   1 root root      2942 Aug 12  2010 ./source/n/procmail/procmail.SlackBuild
--rw-r--r--   1 root root       277 Sep 19  2006 ./source/n/procmail/procmail.lfs.diff.gz
--rw-r--r--   1 root root     13073 Dec 26  2002 ./source/n/procmail/procmail_3.22-5.diff.gz
--rw-r--r--   1 root root      1146 Apr  6  2002 ./source/n/procmail/slack-desc
-drwxr-xr-x   3 root root      4096 Apr  5 03:56 ./source/n/proftpd
--rw-r--r--   1 root root       306 Mar  6  2003 ./source/n/proftpd/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Feb 26  2001 ./source/n/proftpd/etc
--rw-r--r--   1 root root       581 Feb 26  2001 ./source/n/proftpd/etc/ftpusers
--rw-r--r--   1 root root      2046 Jul 29  2008 ./source/n/proftpd/etc/proftpd.conf
--rw-r--r--   1 root root   3629540 Apr  1 18:02 ./source/n/proftpd/proftpd-1.3.3e.tar.xz
--rwxr-xr-x   1 root root      4150 Apr  5 03:56 ./source/n/proftpd/proftpd.SlackBuild
--rw-r--r--   1 root root       797 Sep 18  2004 ./source/n/proftpd/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 23 07:45 ./source/n/pssh
--rw-r--r--   1 root root     21340 Jan 21 22:55 ./source/n/pssh/pssh-2.2.tar.gz
--rwxr-xr-x   1 root root      2959 Jan 23 07:55 ./source/n/pssh/pssh.SlackBuild
--rw-r--r--   1 root root      1035 Jan 23 07:45 ./source/n/pssh/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/pth
--rw-r--r--   1 root root    507518 Jan  5  2007 ./source/n/pth/pth-2.0.7.tar.bz2
--rwxr-xr-x   1 root root      3847 Aug 12  2010 ./source/n/pth/pth.SlackBuild
--rw-r--r--   1 root root       926 Mar 15  2007 ./source/n/pth/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 25  2010 ./source/n/rdist
--rw-r--r--   1 root root       360 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-00.linux.diff.gz
--rw-r--r--   1 root root       836 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-01.links.diff.gz
--rw-r--r--   1 root root       419 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-03.hardlink.diff.gz
--rw-r--r--   1 root root       929 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-04.bison.diff.gz
--rw-r--r--   1 root root       233 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-05.varargs.diff.gz
--rw-r--r--   1 root root       271 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-06.maxargs.diff.gz
--rw-r--r--   1 root root      1500 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-07.lfs.diff.gz
--rw-r--r--   1 root root     12347 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-08.cleanup.diff.gz
--rw-r--r--   1 root root       304 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-09.svr4.diff.gz
--rw-r--r--   1 root root       253 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-10.ssh.diff.gz
--rw-r--r--   1 root root       419 Sep  9  2004 ./source/n/rdist/rdist-6.1.5-11.mkstemp.diff.gz
--rw-r--r--   1 root root       963 May  4  2005 ./source/n/rdist/rdist-6.1.5-12.stat64.diff.gz
--rw-r--r--   1 root root       462 Aug  2  2006 ./source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz
--rw-r--r--   1 root root    117861 Apr  3  2001 ./source/n/rdist/rdist-6.1.5.tar.gz
--rw-r--r--   1 root root      5320 Sep  9  2004 ./source/n/rdist/rdist-eu-license.txt
--rwxr-xr-x   1 root root      3705 Jan 25  2010 ./source/n/rdist/rdist.SlackBuild
--rw-r--r--   1 root root       811 Feb 11  2008 ./source/n/rdist/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 30 23:00 ./source/n/rfkill
--rw-r--r--   1 root root      8052 Aug 15  2010 ./source/n/rfkill/rfkill-0.4.tar.bz2
--rwxr-xr-x   1 root root      2827 Jan 22 04:34 ./source/n/rfkill/rfkill.SlackBuild
--rw-r--r--   1 root root        99 Dec 30 23:00 ./source/n/rfkill/rfkill.url
--rw-r--r--   1 root root       744 Aug 16  2010 ./source/n/rfkill/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/rp-pppoe
--rw-r--r--   1 root root       307 Sep  3  2005 ./source/n/rp-pppoe/doinst.sh.gz
--rw-r--r--   1 root root    215288 Jun 30  2008 ./source/n/rp-pppoe/rp-pppoe-3.10.tar.gz
--rwxr-xr-x   1 root root      2872 Aug 12  2010 ./source/n/rp-pppoe/rp-pppoe.SlackBuild
--rw-r--r--   1 root root       958 Apr 15  2002 ./source/n/rp-pppoe/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 27 00:52 ./source/n/rsync
--rw-r--r--   1 root root    573284 Mar 26 21:37 ./source/n/rsync/rsync-3.0.8.tar.xz
--rwxr-xr-x   1 root root      3075 Mar 27 00:53 ./source/n/rsync/rsync.SlackBuild
--rw-r--r--   1 root root       950 Feb 11  2008 ./source/n/rsync/slack-desc
-drwxr-xr-x   2 root root      4096 May 16  2010 ./source/n/rt2860-firmware
--rw-r--r--   1 root root      4479 May 14  2010 ./source/n/rt2860-firmware/RT2860_Firmware_V26.zip
--rwxr-xr-x   1 root root      2009 May 16  2010 ./source/n/rt2860-firmware/rt2860-firmware.SlackBuild
--rw-r--r--   1 root root       916 May 16  2010 ./source/n/rt2860-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 May 16  2010 ./source/n/rt2870-firmware
--rw-r--r--   1 root root      3570 May 14  2010 ./source/n/rt2870-firmware/RT2870_Firmware_V22.zip
--rwxr-xr-x   1 root root      2009 May 16  2010 ./source/n/rt2870-firmware/rt2870-firmware.SlackBuild
--rw-r--r--   1 root root       807 May 16  2010 ./source/n/rt2870-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/rt61-firmware
--rw-r--r--   1 root root     13937 Mar 10  2008 ./source/n/rt61-firmware/RT61_Firmware_V1.2.zip
--rwxr-xr-x   1 root root      1994 May 19  2009 ./source/n/rt61-firmware/rt61-firmware.SlackBuild
--rw-r--r--   1 root root       737 Mar 10  2008 ./source/n/rt61-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/rt71w-firmware
--rw-r--r--   1 root root      2679 Mar 10  2008 ./source/n/rt71w-firmware/RT71W_Firmware_V1.8.zip
--rwxr-xr-x   1 root root      1997 May 19  2009 ./source/n/rt71w-firmware/rt71w-firmware.SlackBuild
--rw-r--r--   1 root root       752 Mar 10  2008 ./source/n/rt71w-firmware/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  8 18:51 ./source/n/samba
--rw-r--r--   1 root root       374 Mar  7  2003 ./source/n/samba/doinst.sh.gz
--rwxr-xr-x   1 root root      1548 Nov  3 21:28 ./source/n/samba/prune-samba.sh
--rw-r--r--   1 root root       791 Oct  1  2003 ./source/n/samba/rc.samba
--rw-r--r--   1 root root   5677528 Mar  8 18:51 ./source/n/samba/samba-3.5.8.tar.xz
--rwxr-xr-x   1 root root      7420 Nov  3 22:30 ./source/n/samba/samba.SlackBuild
--rw-r--r--   1 root root       985 Jun 18  2010 ./source/n/samba/slack-desc
--rw-r--r--   1 root root      9671 Oct  3  2009 ./source/n/samba/smb.conf.default
--rw-r--r--   1 root root      9683 Sep 30  2009 ./source/n/samba/smb.conf.default.orig
--rw-r--r--   1 root root       528 Oct  3  2009 ./source/n/samba/smb.conf.diff.gz
--rw-r--r--   1 root root       271 Nov  3 21:36 ./source/n/samba/talloc.pc
-drwxr-xr-x   2 root root      4096 Apr 22  2010 ./source/n/sendmail
--rw-r--r--   1 root root       799 Apr 12  2008 ./source/n/sendmail/Build.gz
--rwxr-xr-x   1 root root        63 Nov 26  2008 ./source/n/sendmail/SlackBuild
--rwxr-xr-x   1 root root      5734 Apr 22  2010 ./source/n/sendmail/SlackBuild-sendmail
--rwxr-xr-x   1 root root      2104 Apr 22  2010 ./source/n/sendmail/SlackBuild-sendmail-cf
--rw-r--r--   1 root root      4793 Jun 26  2009 ./source/n/sendmail/_sendmail.tar.gz
--rw-r--r--   1 root root       224 Feb 14  2002 ./source/n/sendmail/linux.uucp.mc
--rw-r--r--   1 root root      2742 Apr 12  2008 ./source/n/sendmail/sendmail-slackware-tls-sasl.mc
--rw-r--r--   1 root root      2510 Apr 12  2008 ./source/n/sendmail/sendmail-slackware-tls.mc
--rw-r--r--   1 root root      1825 May  5  2003 ./source/n/sendmail/sendmail-slackware.mc
--rw-r--r--   1 root root   2080472 Dec 29  2009 ./source/n/sendmail/sendmail.8.14.4.tar.gz
--rw-r--r--   1 root root       152 Dec 29  2009 ./source/n/sendmail/sendmail.8.14.4.tar.gz.sig
--rw-r--r--   1 root root       467 Apr 22  2010 ./source/n/sendmail/site.config.m4
--rw-r--r--   1 root root       962 Jun  1  2002 ./source/n/sendmail/slack-desc.sendmail
--rw-r--r--   1 root root      1050 Jun  1  2002 ./source/n/sendmail/slack-desc.sendmail-cf
-drwxr-xr-x   2 root root      4096 May 19  2010 ./source/n/slrn
--rw-r--r--   1 root root       280 May 19  2010 ./source/n/slrn/doinst.sh.gz
--rw-r--r--   1 root root       764 Nov 11  2008 ./source/n/slrn/slack-desc
--rw-r--r--   1 root root   1040218 Oct 25  2008 ./source/n/slrn/slrn-0.9.9p1.tar.bz2
--rwxr-xr-x   1 root root      3834 May 19  2010 ./source/n/slrn/slrn.SlackBuild
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/n/snownews
--rw-r--r--   1 root root       874 May 17  2009 ./source/n/snownews/slack-desc
--rw-r--r--   1 root root    167944 Sep 17  2009 ./source/n/snownews/snownews-1.5.12.tar.gz
--rw-r--r--   1 root root       194 Sep 17  2009 ./source/n/snownews/snownews-1.5.12.tar.gz.asc
--rwxr-xr-x   1 root root      3588 May  3  2010 ./source/n/snownews/snownews.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr  5 06:13 ./source/n/stunnel
--rw-r--r--   1 root root       265 Jan  9  2005 ./source/n/stunnel/doinst.sh.gz
--rw-r--r--   1 root root       290 Aug 28  2003 ./source/n/stunnel/generate-stunnel-key.sh
--rw-r--r--   1 root root       968 Aug 28  2003 ./source/n/stunnel/slack-desc
--rw-r--r--   1 root root    541012 Feb  5 21:54 ./source/n/stunnel/stunnel-4.35.tar.gz
--rw-r--r--   1 root root       190 Feb  5 21:54 ./source/n/stunnel/stunnel-4.35.tar.gz.asc
--rwxr-xr-x   1 root root      4376 May  3  2010 ./source/n/stunnel/stunnel.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/tcp_wrappers
--rw-r--r--   1 root root      1112 Apr 29  2007 ./source/n/tcp_wrappers/slack-desc
--rwxr-xr-x   1 root root      3279 Aug 12  2010 ./source/n/tcp_wrappers/tcp_wrappers.SlackBuild
--rw-r--r--   1 root root    118844 Feb 22  2004 ./source/n/tcp_wrappers/tcp_wrappers_7.6.tar.gz
-drwxr-xr-x   2 root root      4096 Aug  5  2010 ./source/n/tcpdump
--rw-r--r--   1 root root       908 Aug  5  2010 ./source/n/tcpdump/slack-desc
--rw-r--r--   1 root root   1587392 Apr  6  2010 ./source/n/tcpdump/tcpdump-4.1.1.tar.gz
--rw-r--r--   1 root root        72 Apr  6  2010 ./source/n/tcpdump/tcpdump-4.1.1.tar.gz.sig
--rwxr-xr-x   1 root root      3088 Aug  5  2010 ./source/n/tcpdump/tcpdump.SlackBuild
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/telnet
--rw-r--r--   1 root root       522 Aug  9  2001 ./source/n/telnet/netkit-telnet-0.17-ayt.patch.gz
--rw-r--r--   1 root root       176 Feb 26  2001 ./source/n/telnet/netkit-telnet-0.17.diff.gz
--rw-r--r--   1 root root    133749 Jul 31  2000 ./source/n/telnet/netkit-telnet-0.17.tar.gz
--rw-r--r--   1 root root      1014 Apr 29  2007 ./source/n/telnet/slack-desc
--rw-r--r--   1 root root      2605 Aug 28  2005 ./source/n/telnet/telnet-OpenBSD-014_telnet.diff.gz
--rw-r--r--   1 root root       869 Mar 22  2002 ./source/n/telnet/telnet-OpenBSD-20020321.diff.gz
--rw-r--r--   1 root root    104068 Mar 22  2002 ./source/n/telnet/telnet-OpenBSD-20020321.tar.gz
--rwxr-xr-x   1 root root      2950 Aug 12  2010 ./source/n/telnet/telnet.SlackBuild
-drwxr-xr-x   2 root root      4096 May  3  2010 ./source/n/tftp-hpa
--rw-r--r--   1 root root      1015 Apr 29  2007 ./source/n/tftp-hpa/slack-desc
--rw-r--r--   1 root root     91829 Oct 20  2008 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2
--rw-r--r--   1 root root       248 Oct 20  2008 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign
--rwxr-xr-x   1 root root      2781 May  3  2010 ./source/n/tftp-hpa/tftp-hpa.SlackBuild
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/tin
--rw-r--r--   1 root root       944 Mar  6  2002 ./source/n/tin/slack-desc
--rw-r--r--   1 root root   1437604 Feb  1  2007 ./source/n/tin/tin-1.8.3.tar.bz2
--rw-r--r--   1 root root       286 Feb  1  2007 ./source/n/tin/tin-1.8.3.tar.bz2.sign
--rwxr-xr-x   1 root root      3304 Feb 24 23:08 ./source/n/tin/tin.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 25 06:03 ./source/n/traceroute
--rw-r--r--   1 root root       969 Mar 16  2002 ./source/n/traceroute/slack-desc
--rw-r--r--   1 root root     65252 Dec 14 16:24 ./source/n/traceroute/traceroute-2.0.17.tar.gz
--rwxr-xr-x   1 root root      2967 May 10  2010 ./source/n/traceroute/traceroute.SlackBuild
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/n/trn
--rw-r--r--   1 root root      5599 Oct 26  1998 ./source/n/trn/_trn.tar.gz
--rw-r--r--   1 root root      1697 Mar  7  2002 ./source/n/trn/config.sh.gz
--rw-r--r--   1 root root      1716 Mar 16  2009 ./source/n/trn/config.x86_64.sh.gz
--rw-r--r--   1 root root       744 Mar  6  2002 ./source/n/trn/slack-desc
--rw-r--r--   1 root root    325115 Jan  9  1995 ./source/n/trn/trn-3.6.tar.gz
--rwxr-xr-x   1 root root      2902 Aug 12  2010 ./source/n/trn/trn.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/uucp
--rw-r--r--   1 root root      1001 Jun  5  2003 ./source/n/uucp/_uucp.tar.gz
--rw-r--r--   1 root root      1777 Jun  5  2003 ./source/n/uucp/policy.h.diff.gz
--rw-r--r--   1 root root       737 Feb 27  2002 ./source/n/uucp/slack-desc
--rw-r--r--   1 root root   1013234 Jun  4  2003 ./source/n/uucp/uucp-1.07.tar.gz
--rwxr-xr-x   1 root root      2666 Aug 12  2010 ./source/n/uucp/uucp.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/vlan
--rw-r--r--   1 root root       888 Apr 29  2007 ./source/n/vlan/slack-desc
--rw-r--r--   1 root root    132059 Oct 20  2005 ./source/n/vlan/vlan.1.9.tar.bz2
--rwxr-xr-x   1 root root      2329 Aug 12  2010 ./source/n/vlan/vlan.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb 17 17:11 ./source/n/vsftpd
--rw-r--r--   1 root root       283 Feb 19  2009 ./source/n/vsftpd/doinst.sh.gz
--rw-r--r--   1 root root       953 Sep  3  2004 ./source/n/vsftpd/slack-desc
--rw-r--r--   1 root root    187043 Feb 15 22:38 ./source/n/vsftpd/vsftpd-2.3.4.tar.gz
--rwxr-xr-x   1 root root      3422 Feb 17 17:11 ./source/n/vsftpd/vsftpd.SlackBuild
--rw-r--r--   1 root root       198 Sep  3  2004 ./source/n/vsftpd/vsftpd.builddefs.diff.gz
--rw-r--r--   1 root root       950 Oct 19  2009 ./source/n/vsftpd/vsftpd.conf.diff.gz
--rw-r--r--   1 root root       115 Sep  3  2004 ./source/n/vsftpd/vsftpd.log.gz
-drwxr-xr-x   2 root root      4096 Dec  3  2009 ./source/n/wget
--rw-r--r--   1 root root       264 Oct  1  2008 ./source/n/wget/doinst.sh.gz
--rw-r--r--   1 root root       853 Mar 23  2002 ./source/n/wget/slack-desc
--rw-r--r--   1 root root   1217348 Dec  2  2009 ./source/n/wget/wget-1.12.tar.xz
--rwxr-xr-x   1 root root      3368 Feb  9  2010 ./source/n/wget/wget.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 25 21:01 ./source/n/whois
--rw-r--r--   1 root root       841 Jun 13  2004 ./source/n/whois/slack-desc
--rwxr-xr-x   1 root root      2518 Mar 25 21:01 ./source/n/whois/whois.SlackBuild
--rw-r--r--   1 root root     81195 Feb  4 11:02 ./source/n/whois/whois_5.0.11.tar.gz
-drwxr-xr-x   3 root root      4096 Apr 27  2009 ./source/n/wireless-tools
--rw-r--r--   1 root root       389 May 10  2007 ./source/n/wireless-tools/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Jan  3  2010 ./source/n/wireless-tools/scripts
--rw-r--r--   1 root root     12835 Jan  3  2010 ./source/n/wireless-tools/scripts/rc.wireless
--rw-r--r--   1 root root      7320 May  9  2007 ./source/n/wireless-tools/scripts/rc.wireless.conf
--rw-r--r--   1 root root      1147 Apr 30  2006 ./source/n/wireless-tools/slack-desc
--rw-r--r--   1 root root    294417 Sep 18  2007 ./source/n/wireless-tools/wireless_tools.29.tar.gz
--rwxr-xr-x   1 root root      3755 Jan  3  2010 ./source/n/wireless-tools/wireless_tools.SlackBuild
--rw-r--r--   1 root root       227 Jul 14  2005 ./source/n/wireless-tools/wireless_tools.nowhine.diff.gz
--rw-r--r--   1 root root       287 Jul 25  2005 ./source/n/wireless-tools/wireless_tools.static.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 14 04:33 ./source/n/wpa_supplicant
--rw-r--r--   1 root root      2080 Aug  6  2005 ./source/n/wpa_supplicant/README.slackware
--rw-r--r--   1 root root        96 Jun 16  2010 ./source/n/wpa_supplicant/fi.epitest.hostap.WPASupplicant.service
--rw-r--r--   1 root root       897 Mar 14 04:32 ./source/n/wpa_supplicant/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch.gz
--rw-r--r--   1 root root      1067 Feb 28  2008 ./source/n/wpa_supplicant/slack-desc
--rw-r--r--   1 root root      5124 Apr 20  2009 ./source/n/wpa_supplicant/wpa_gui.png
--rw-r--r--   1 root root   1123344 Sep  7  2010 ./source/n/wpa_supplicant/wpa_supplicant-0.7.3.tar.xz
--rwxr-xr-x   1 root root      8200 Mar 14 04:34 ./source/n/wpa_supplicant/wpa_supplicant.SlackBuild
--rw-r--r--   1 root root       560 Feb 24 23:03 ./source/n/wpa_supplicant/wpa_supplicant.defconfig
-drwxr-xr-x   2 root root      4096 Mar  8 18:32 ./source/n/yptools
--rw-r--r--   1 root root       616 Nov 24  2000 ./source/n/yptools/nsswitch.conf-nis.gz
--rw-r--r--   1 root root       922 May 31  2002 ./source/n/yptools/rc.yp.gz
--rw-r--r--   1 root root       865 Mar  5  2002 ./source/n/yptools/slack-desc
--rw-r--r--   1 root root    204228 Apr 21  2010 ./source/n/yptools/yp-tools-2.12.tar.bz2
--rw-r--r--   1 root root       248 Apr 21  2010 ./source/n/yptools/yp-tools-2.12.tar.bz2.sign
--rw-r--r--   1 root root    182276 Jul  7  2010 ./source/n/yptools/ypbind-mt-1.32.tar.bz2
--rw-r--r--   1 root root       248 Jul  7  2010 ./source/n/yptools/ypbind-mt-1.32.tar.sign
--rw-r--r--   1 root root    195528 Sep 24  2010 ./source/n/yptools/ypserv-2.24.tar.bz2
--rw-r--r--   1 root root       248 Sep 24  2010 ./source/n/yptools/ypserv-2.24.tar.sign
--rwxr-xr-x   1 root root      9334 Mar  8 18:33 ./source/n/yptools/yptools.SlackBuild
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/n/ytalk
--rw-r--r--   1 root root       269 Feb  3  2006 ./source/n/ytalk/doinst.sh.gz
--rw-r--r--   1 root root       745 Mar 25  2002 ./source/n/ytalk/slack-desc
--rw-r--r--   1 root root    110912 Feb 13  2005 ./source/n/ytalk/ytalk-3.3.0.tar.bz2
--rwxr-xr-x   1 root root      2844 Aug 12  2010 ./source/n/ytalk/ytalk.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/n/zd1211-firmware
--rw-r--r--   1 root root     39061 Oct  4  2007 ./source/n/zd1211-firmware/zd1211-firmware-1.4.tar.bz2
--rwxr-xr-x   1 root root      2935 May 19  2009 ./source/n/zd1211-firmware/zd1211-firmware.SlackBuild
-drwxr-xr-x   5 root root      4096 May 17  2010 ./source/t
-drwxr-xr-x   3 root root      4096 May 17  2010 ./source/t/tetex
--rw-r--r--   1 root root    103137 Oct  4  2005 ./source/t/tetex/jadetex-3.13.tar.gz
--rwxr-xr-x   1 root root      2073 Oct 15  2008 ./source/t/tetex/jadetex.build
-drwxr-xr-x   2 root root      4096 Aug 28  2002 ./source/t/tetex/profile.d
--rwxr-xr-x   1 root root       134 Apr 24  2000 ./source/t/tetex/profile.d/tetex.csh
--rwxr-xr-x   1 root root       118 Apr 24  2000 ./source/t/tetex/profile.d/tetex.sh
--rw-r--r--   1 root root       794 Aug 28  2002 ./source/t/tetex/slack-desc.tetex
--rw-r--r--   1 root root       984 Feb 18  2005 ./source/t/tetex/slack-desc.tetex-doc
--rw-r--r--   1 root root   7049516 Feb  6  2005 ./source/t/tetex/tetex-src-3.0.tar.xz
--rw-r--r--   1 root root  75797944 Feb  6  2005 ./source/t/tetex/tetex-texmf-3.0.tar.xz
--rw-r--r--   1 root root  47549400 Feb  6  2005 ./source/t/tetex/tetex-texmfsrc-3.0.tar.xz
--rw-r--r--   1 root root      1759 Jan 17  2006 ./source/t/tetex/tetex.CVE-2005-3193.diff.gz
--rwxr-xr-x   1 root root      9081 May 17  2010 ./source/t/tetex/tetex.SlackBuild
--rw-r--r--   1 root root       517 Feb 19  2010 ./source/t/tetex/tetex.afm2tfm.getline.diff.gz
--rw-r--r--   1 root root       303 Feb 10  2005 ./source/t/tetex/tetex.amstex.fmtutil.diff.gz
--rw-r--r--   1 root root       633 May 16  2006 ./source/t/tetex/tetex.browsers.diff.gz
--rw-r--r--   1 root root       389 Feb 19  2010 ./source/t/tetex/tetex.cpascal.getline.posix.2008.diff.gz
--rw-r--r--   1 root root       504 Sep  9  2004 ./source/t/tetex/tetex.dvipdfm.mkstemp.diff.gz
--rw-r--r--   1 root root       239 Jul 18  2005 ./source/t/tetex/tetex.etex.diff.gz
--rw-r--r--   1 root root       375 Jun 28  2007 ./source/t/tetex/tetex.fontcachedirinhome.diff.gz
--rw-r--r--   1 root root       478 May 17  2010 ./source/t/tetex/tetex.leet.diff.gz
--rw-r--r--   1 root root       580 Feb 19  2010 ./source/t/tetex/tetex.png14.diff.gz
--rw-r--r--   1 root root      2480 Feb 10  2005 ./source/t/tetex/tetex.scripts.mktemp.diff.gz
--rw-r--r--   1 root root       724 Nov  9  2005 ./source/t/tetex/tetex.tmp.cleanup.diff.gz
--rw-r--r--   1 root root       250 Feb 10  2005 ./source/t/tetex/tetex.var.fonts.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 20  2010 ./source/t/transfig
--rw-r--r--   1 root root       903 Feb 11  2008 ./source/t/transfig/slack-desc
--rw-r--r--   1 root root       601 Feb 19  2007 ./source/t/transfig/transfig.3.2.4-gcc4.patch.gz
--rw-r--r--   1 root root    326284 Dec 19  2002 ./source/t/transfig/transfig.3.2.4.tar.gz
--rwxr-xr-x   1 root root      3669 Feb 20  2010 ./source/t/transfig/transfig.SlackBuild
--rw-r--r--   1 root root       479 Feb 19  2007 ./source/t/transfig/transfig.diff.gz
--rw-r--r--   1 root root       285 Feb 20  2010 ./source/t/transfig/transfig.png14.nodither.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 20  2010 ./source/t/xfig
--rw-r--r--   1 root root       886 Feb 11  2008 ./source/t/xfig/slack-desc
--rw-r--r--   1 root root      3177 Feb  5  2004 ./source/t/xfig/xfig-3.2.4-mkstemp.diff.gz
--rw-r--r--   1 root root       604 Feb  3  2004 ./source/t/xfig/xfig.3.2.3d-international-std-fonts.diff.gz
--rw-r--r--   1 root root       149 Feb  3  2004 ./source/t/xfig/xfig.3.2.3d-xcolor.diff.gz
--rw-r--r--   1 root root       545 Feb  3  2004 ./source/t/xfig/xfig.3.2.3d-xim.diff.gz
--rw-r--r--   1 root root       210 Oct  6  2005 ./source/t/xfig/xfig.3.2.4-gcc4.diff.gz
--rw-r--r--   1 root root      1386 Nov 16  2006 ./source/t/xfig/xfig.3.2.4-locale.diff.gz
--rw-r--r--   1 root root       577 Mar 22  2004 ./source/t/xfig/xfig.3.2.4-null.diff.gz
--rw-r--r--   1 root root      1695 Aug 25  2004 ./source/t/xfig/xfig.3.2.4-quiet.diff.gz
--rw-r--r--   1 root root      1599 Oct  6  2005 ./source/t/xfig/xfig.3.2.4-urw-fonts.diff.gz
--rw-r--r--   1 root root      5582 Apr 14  2008 ./source/t/xfig/xfig.3.2.4.diff.gz
--rw-r--r--   1 root root   3666286 Aug 15  2006 ./source/t/xfig/xfig.3.2.4.full.tar.bz2
--rwxr-xr-x   1 root root      4442 Feb 21  2010 ./source/t/xfig/xfig.SlackBuild
--rw-r--r--   1 root root       288 Feb 19  2007 ./source/t/xfig/xfig.docs.location.diff.gz
--rw-r--r--   1 root root       578 Feb 19  2007 ./source/t/xfig/xfig.fig.ad.diff.gz
--rw-r--r--   1 root root       402 Aug 14  2006 ./source/t/xfig/xfig.no.pdf.ref.diff.gz
--rw-r--r--   1 root root       286 Aug 15  2006 ./source/t/xfig/xfig.no.xfig_ref_en.pdf.diff.gz
--rw-r--r--   1 root root       279 Feb 20  2010 ./source/t/xfig/xfig.png14.nodither.diff.gz
-drwxr-xr-x   8 root root      4096 Nov  4 00:44 ./source/tcl
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/tcl/expect
--rw-r--r--   1 root root    547655 Aug 12  2010 ./source/tcl/expect/expect-5.44.1.15.tar.bz2
--rwxr-xr-x   1 root root      4180 Aug 12  2010 ./source/tcl/expect/expect.SlackBuild
--rw-r--r--   1 root root       221 May 11  2009 ./source/tcl/expect/expect.exp_main_tk.c.version.require.diff.gz
--rw-r--r--   1 root root       990 Feb 11  2008 ./source/tcl/expect/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/tcl/hfsutils
--rw-r--r--   1 root root    207697 Nov  2  1998 ./source/tcl/hfsutils/hfsutils-3.2.6.tar.gz
--rw-r--r--   1 root root       286 Nov  2  1998 ./source/tcl/hfsutils/hfsutils-3.2.6.tar.gz.sign
--rwxr-xr-x   1 root root      4765 Aug 12  2010 ./source/tcl/hfsutils/hfsutils.SlackBuild
--rw-r--r--   1 root root       209 Jul 11  2005 ./source/tcl/hfsutils/hfsutils.errno.diff.gz
--rw-r--r--   1 root root       928 Feb 11  2008 ./source/tcl/hfsutils/slack-desc
-drwxr-xr-x   2 root root      4096 Sep 12  2010 ./source/tcl/tcl
--rw-r--r--   1 root root       713 Mar 23  2002 ./source/tcl/tcl/slack-desc
--rwxr-xr-x   1 root root      3937 Sep 12  2010 ./source/tcl/tcl/tcl.SlackBuild
--rw-r--r--   1 root root   2786880 Sep  8  2010 ./source/tcl/tcl/tcl8.5.9-src.tar.xz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/tcl/tclx
--rw-r--r--   1 root root      1010 Mar 24  2002 ./source/tcl/tclx/slack-desc
--rw-r--r--   1 root root       353 Feb 21  2007 ./source/tcl/tclx/tclx-8.4.configure.diff.gz
--rw-r--r--   1 root root       270 Feb 21  2007 ./source/tcl/tclx/tclx-8.4.gcc4.diff.gz
--rwxr-xr-x   1 root root      3874 Dec  7  2009 ./source/tcl/tclx/tclx.SlackBuild
--rw-r--r--   1 root root    313595 Feb  3  2006 ./source/tcl/tclx/tclx8.4.tar.bz2
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/tcl/tix
--rw-r--r--   1 root root   1831503 Jul 28  2008 ./source/tcl/tix/Tix8.4.3.tar.gz
--rw-r--r--   1 root root       860 Mar 24  2002 ./source/tcl/tix/slack-desc
--rwxr-xr-x   1 root root      3333 Dec  7  2009 ./source/tcl/tix/tix.SlackBuild
--rw-r--r--   1 root root       236 Nov 18  2006 ./source/tcl/tix/tix.soname.patch.gz
--rw-r--r--   1 root root      1908 Sep  9  2008 ./source/tcl/tix/tix.tcl8.5.patch.gz
-drwxr-xr-x   2 root root      4096 Sep 12  2010 ./source/tcl/tk
--rw-r--r--   1 root root       651 Mar 24  2002 ./source/tcl/tk/slack-desc
--rwxr-xr-x   1 root root      3805 Sep 12  2010 ./source/tcl/tk/tk.SlackBuild
--rw-r--r--   1 root root   2423452 Sep  8  2010 ./source/tcl/tk/tk8.5.9-src.tar.xz
-drwxr-xr-x  31 root root      4096 Apr 15 19:50 ./source/x
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/x/anthy
--rw-r--r--   1 root root   3198760 Feb  7  2009 ./source/x/anthy/anthy-9100h.tar.xz
--rwxr-xr-x   1 root root      4287 Aug 12  2010 ./source/x/anthy/anthy.SlackBuild
--rw-r--r--   1 root root       714 Feb 13  2008 ./source/x/anthy/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 18 19:44 ./source/x/dejavu-fonts-ttf
--rw-r--r--   1 root root   2238052 Feb 27 15:04 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf-2.33.tar.xz
--rwxr-xr-x   1 root root      2889 Oct 11  2010 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild
--rw-r--r--   1 root root       167 Mar 24  2007 ./source/x/dejavu-fonts-ttf/doinst.sh.gz
--rw-r--r--   1 root root      1003 Aug  3  2008 ./source/x/dejavu-fonts-ttf/slack-desc
-drwxr-xr-x   2 root root      4096 Dec  2  2009 ./source/x/fontconfig
--rw-r--r--   1 root root       149 Dec  2  2009 ./source/x/fontconfig/doinst.sh.gz
--rw-r--r--   1 root root    992040 Dec  2  2009 ./source/x/fontconfig/fontconfig-2.8.0.tar.xz
--rwxr-xr-x   1 root root      5286 Feb 20  2010 ./source/x/fontconfig/fontconfig.SlackBuild
--rw-r--r--   1 root root       546 Dec  2  2009 ./source/x/fontconfig/fontconfig.dejavu.diff.gz
--rw-r--r--   1 root root       457 Dec  2  2009 ./source/x/fontconfig/fontconfig.font.dir.list.diff.gz
--rw-r--r--   1 root root       657 Jan 25  2007 ./source/x/fontconfig/setup.05.fontconfig
--rw-r--r--   1 root root       809 Jul 22  2006 ./source/x/fontconfig/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  4 23:55 ./source/x/glew
--rw-r--r--   1 root root    286588 Nov  3 20:55 ./source/x/glew/glew-1.5.7.tar.xz
--rwxr-xr-x   1 root root      3009 Nov  4 23:55 ./source/x/glew/glew.SlackBuild
--rw-r--r--   1 root root        81 Aug 12  2010 ./source/x/glew/glew.url
--rw-r--r--   1 root root       840 Jul 23  2009 ./source/x/glew/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 13 02:43 ./source/x/libdrm
--rw-r--r--   1 root root    323600 Dec 10 16:01 ./source/x/libdrm/libdrm-2.4.23.tar.xz
--rwxr-xr-x   1 root root      3666 Mar  3  2010 ./source/x/libdrm/libdrm.SlackBuild
--rw-r--r--   1 root root       257 Feb 22  2010 ./source/x/libdrm/libdrm.uint32_t.diff.gz
--rw-r--r--   1 root root       717 Feb  1  2007 ./source/x/libdrm/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 23 05:06 ./source/x/liberation-fonts-ttf
--rw-r--r--   1 root root      1123 Mar 23 05:07 ./source/x/liberation-fonts-ttf/60-liberation.conf
--rw-r--r--   1 root root       167 Mar 24  2007 ./source/x/liberation-fonts-ttf/doinst.sh.gz
--rw-r--r--   1 root root    830232 Jul 21  2010 ./source/x/liberation-fonts-ttf/liberation-fonts-ttf-1.06.0.20100721.tar.xz
--rwxr-xr-x   1 root root      2573 Mar 23 05:07 ./source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild
--rw-r--r--   1 root root      1042 Jan  2  2008 ./source/x/liberation-fonts-ttf/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 17:28 ./source/x/libhangul
--rw-r--r--   1 root root   2133260 Jan  2 15:04 ./source/x/libhangul/libhangul-0.0.12.tar.xz
--rwxr-xr-x   1 root root      4134 Mar 21 17:29 ./source/x/libhangul/libhangul.SlackBuild
--rw-r--r--   1 root root       841 Feb 13  2008 ./source/x/libhangul/slack-desc
-drwxr-xr-x   2 root root      4096 Aug 12  2010 ./source/x/m17n-lib
--rw-r--r--   1 root root    926952 Apr 19  2010 ./source/x/m17n-lib/m17n-db-1.6.1.tar.xz
--rw-r--r--   1 root root    670440 Apr 26  2010 ./source/x/m17n-lib/m17n-lib-1.6.1.tar.xz
--rwxr-xr-x   1 root root      5665 Aug 12  2010 ./source/x/m17n-lib/m17n-lib.SlackBuild
--rw-r--r--   1 root root       875 Feb 13  2008 ./source/x/m17n-lib/slack-desc
-drwxr-xr-x   3 root root      4096 Mar 15 21:35 ./source/x/mesa
--rw-r--r--   1 root root    200406 Mar  2 22:21 ./source/x/mesa/MesaGLUT-7.9.2.tar.bz2
--rw-r--r--   1 root root   5648858 Mar  2 22:21 ./source/x/mesa/MesaLib-7.9.2.tar.bz2
--rw-r--r--   1 root root       352 Mar 10  2008 ./source/x/mesa/README.GIT
--rwxr-xr-x   1 root root       731 Feb  5 21:30 ./source/x/mesa/get-mesa.sh
--rw-r--r--   1 root root   7168504 Oct  1  2010 ./source/x/mesa/mesa-demos-8.0.1.tar.xz
--rwxr-xr-x   1 root root      5447 Mar 15 21:35 ./source/x/mesa/mesa.SlackBuild
--rw-r--r--   1 root root        78 Oct  1  2010 ./source/x/mesa/mesa.url
-drwxr-xr-x   2 root root      4096 Jan 30 23:09 ./source/x/mesa/patches
--rw-r--r--   1 root root       579 Oct 29 19:22 ./source/x/mesa/patches/i915_fragment_shader_disable.patch.gz
--rw-r--r--   1 root root      1191 Jan 30 23:05 ./source/x/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz
--rw-r--r--   1 root root       790 Feb  5  2007 ./source/x/mesa/slack-desc
-drwxr-xr-x   3 root root      4096 Mar 11 04:25 ./source/x/radeon_ucode
--rwxr-xr-x   1 root root      1913 Mar 11 04:25 ./source/x/radeon_ucode/radeon_ucode.SlackBuild
--rw-r--r--   1 root root       830 Sep  3  2010 ./source/x/radeon_ucode/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 11 04:25 ./source/x/radeon_ucode/ucode-20110302
--rw-r--r--   1 root root     24096 Jan  6 22:49 ./source/x/radeon_ucode/ucode-20110302/BARTS_mc.bin
--rw-r--r--   1 root root      5504 Jan  6 22:49 ./source/x/radeon_ucode/ucode-20110302/BARTS_me.bin
--rw-r--r--   1 root root      4480 Jan  6 22:49 ./source/x/radeon_ucode/ucode-20110302/BARTS_pfp.bin
--rw-r--r--   1 root root      3072 Jan  6 22:49 ./source/x/radeon_ucode/ucode-20110302/BTC_rlc.bin
--rw-r--r--   1 root root     24096 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/CAICOS_mc.bin
--rw-r--r--   1 root root      5504 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/CAICOS_me.bin
--rw-r--r--   1 root root      4480 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/CAICOS_pfp.bin
--rw-r--r--   1 root root     24148 Mar  3 01:15 ./source/x/radeon_ucode/ucode-20110302/CAYMAN_mc.bin
--rw-r--r--   1 root root      8704 Mar  3 01:15 ./source/x/radeon_ucode/ucode-20110302/CAYMAN_me.bin
--rw-r--r--   1 root root      8704 Mar  3 01:15 ./source/x/radeon_ucode/ucode-20110302/CAYMAN_pfp.bin
--rw-r--r--   1 root root      4096 Mar  3 01:15 ./source/x/radeon_ucode/ucode-20110302/CAYMAN_rlc.bin
--rw-r--r--   1 root root      5504 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CEDAR_me.bin
--rw-r--r--   1 root root      4480 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CEDAR_pfp.bin
--rw-r--r--   1 root root      3072 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CEDAR_rlc.bin
--rw-r--r--   1 root root      5504 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CYPRESS_me.bin
--rw-r--r--   1 root root      4480 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CYPRESS_pfp.bin
--rw-r--r--   1 root root      3072 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/CYPRESS_rlc.bin
--rw-r--r--   1 root root      5504 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/JUNIPER_me.bin
--rw-r--r--   1 root root      4480 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/JUNIPER_pfp.bin
--rw-r--r--   1 root root      3072 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/JUNIPER_rlc.bin
--rw-r--r--   1 root root      2943 Jan  6 22:51 ./source/x/radeon_ucode/ucode-20110302/LICENSE.radeon
--rw-r--r--   1 root root      5504 Nov 22 23:26 ./source/x/radeon_ucode/ucode-20110302/PALM_me.bin
--rw-r--r--   1 root root      4480 Nov 22 23:26 ./source/x/radeon_ucode/ucode-20110302/PALM_pfp.bin
--rw-r--r--   1 root root      3072 Dec  9  2009 ./source/x/radeon_ucode/ucode-20110302/R600_rlc.bin
--rw-r--r--   1 root root      4096 Dec  9  2009 ./source/x/radeon_ucode/ucode-20110302/R700_rlc.bin
--rw-r--r--   1 root root      5504 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/REDWOOD_me.bin
--rw-r--r--   1 root root      4480 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/REDWOOD_pfp.bin
--rw-r--r--   1 root root      3072 Apr  8  2010 ./source/x/radeon_ucode/ucode-20110302/REDWOOD_rlc.bin
--rw-r--r--   1 root root      3072 Nov 22 23:26 ./source/x/radeon_ucode/ucode-20110302/SUMO_rlc.bin
--rw-r--r--   1 root root     24096 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/TURKS_mc.bin
--rw-r--r--   1 root root      5504 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/TURKS_me.bin
--rw-r--r--   1 root root      4480 Jan  6 22:50 ./source/x/radeon_ucode/ucode-20110302/TURKS_pfp.bin
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/sazanami-fonts-ttf
--rw-r--r--   1 root root   8622710 Jun 29  2004 ./source/x/sazanami-fonts-ttf/sazanami-20040629.tar.bz2
--rwxr-xr-x   1 root root      3319 May 19  2009 ./source/x/sazanami-fonts-ttf/sazanami-fonts-ttf.SlackBuild
--rw-r--r--   1 root root       872 Feb 12  2008 ./source/x/sazanami-fonts-ttf/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 19 23:10 ./source/x/scim
-drwxr-xr-x   2 root root      4096 Jun 10  2009 ./source/x/scim-anthy
--rw-r--r--   1 root root    649495 May 21  2007 ./source/x/scim-anthy/scim-anthy-1.2.4.tar.gz
--rwxr-xr-x   1 root root      3585 Jun 10  2009 ./source/x/scim-anthy/scim-anthy.SlackBuild
--rw-r--r--   1 root root       553 Jun 10  2009 ./source/x/scim-anthy/scim-anthy.gcc43.diff.gz
--rw-r--r--   1 root root       969 Feb 13  2008 ./source/x/scim-anthy/slack-desc
-drwxr-xr-x   3 root root      4096 Mar 19 23:17 ./source/x/scim-bridge
-drwxr-xr-x   2 root root      4096 Mar 19 23:17 ./source/x/scim-bridge/patches
--rw-r--r--   1 root root       326 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch.gz
--rw-r--r--   1 root root       876 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-imcontext.cpp.patch.gz
--rw-r--r--   1 root root       407 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-imcontext.h.patch.gz
--rw-r--r--   1 root root       648 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent.cpp.patch.gz
--rw-r--r--   1 root root       758 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-client-imcontext-gtk.c.patch.gz
--rw-r--r--   1 root root       419 Mar 19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-client-imcontext-qt.cpp.patch.gz
--rw-r--r--   1 root root    508870 Apr 19  2009 ./source/x/scim-bridge/scim-bridge-0.4.16.tar.gz
--rwxr-xr-x   1 root root      5290 Mar 19 23:19 ./source/x/scim-bridge/scim-bridge.SlackBuild
--rw-r--r--   1 root root       967 Feb 13  2008 ./source/x/scim-bridge/slack-desc
-drwxr-xr-x   2 root root      4096 Jun 10  2009 ./source/x/scim-hangul
--rw-r--r--   1 root root   1176577 Dec 30  2007 ./source/x/scim-hangul/scim-hangul-0.3.2.tar.gz
--rwxr-xr-x   1 root root      3579 Jun 10  2009 ./source/x/scim-hangul/scim-hangul.SlackBuild
--rw-r--r--   1 root root       278 Jun 10  2009 ./source/x/scim-hangul/scim-hangul.gcc43.diff.gz
--rw-r--r--   1 root root      1073 Feb  4  2008 ./source/x/scim-hangul/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/x/scim-input-pad
--rw-r--r--   1 root root    442263 Apr 19  2009 ./source/x/scim-input-pad/scim-input-pad-0.1.2.tar.bz2
--rwxr-xr-x   1 root root      3330 Jun 10  2009 ./source/x/scim-input-pad/scim-input-pad.SlackBuild
--rw-r--r--   1 root root       821 Apr 20  2009 ./source/x/scim-input-pad/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/scim-m17n
--rw-r--r--   1 root root    355801 Apr 19  2009 ./source/x/scim-m17n/scim-m17n-0.2.3.tar.gz
--rwxr-xr-x   1 root root      3833 May 19  2009 ./source/x/scim-m17n/scim-m17n.SlackBuild
--rw-r--r--   1 root root       862 Feb 13  2008 ./source/x/scim-m17n/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/scim-pinyin
--rw-r--r--   1 root root   5492055 Aug 12  2005 ./source/x/scim-pinyin/scim-pinyin-0.5.91.tar.gz
--rwxr-xr-x   1 root root      3921 Jun 10  2009 ./source/x/scim-pinyin/scim-pinyin.SlackBuild
--rw-r--r--   1 root root       448 Mar 16  2009 ./source/x/scim-pinyin/scim-pinyin.gcc43.diff.gz
--rw-r--r--   1 root root       848 Feb 13  2008 ./source/x/scim-pinyin/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/x/scim-tables
--rw-r--r--   1 root root   7256429 Jan 25  2009 ./source/x/scim-tables/scim-tables-0.5.9.tar.gz
--rwxr-xr-x   1 root root      3688 Jun 10  2009 ./source/x/scim-tables/scim-tables.SlackBuild
--rw-r--r--   1 root root       751 Feb 13  2008 ./source/x/scim-tables/slack-desc
--rw-r--r--   1 root root       222 Mar 19 23:05 ./source/x/scim/scim-1.4.9-fix-ltdl.cpp.patch.gz
--rw-r--r--   1 root root   1512444 Apr 19  2009 ./source/x/scim/scim-1.4.9.tar.xz
--rw-r--r--   1 root root      1411 Oct 28  2007 ./source/x/scim/scim-setup.desktop
--rwxr-xr-x   1 root root      9293 Mar 19 23:11 ./source/x/scim/scim.SlackBuild
--rw-r--r--   1 root root       423 Mar 31  2008 ./source/x/scim/scim.desktop
--rw-r--r--   1 root root       785 Feb 16  2008 ./source/x/scim/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/sinhala_lklug-font-ttf
--rwxr-xr-x   1 root root      3389 May 19  2009 ./source/x/sinhala_lklug-font-ttf/sinhala_lklug-font-ttf.SlackBuild
--rw-r--r--   1 root root    300476 Sep 29  2006 ./source/x/sinhala_lklug-font-ttf/sinhala_lklug.ttf
--rw-r--r--   1 root root       946 Feb 12  2008 ./source/x/sinhala_lklug-font-ttf/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/tibmachuni-font-ttf
--rw-r--r--   1 root root   1676199 Mar  2  2010 ./source/x/tibmachuni-font-ttf/TibetanMachineUnicodeFont.zip
--rw-r--r--   1 root root      1031 Feb 16  2008 ./source/x/tibmachuni-font-ttf/slack-desc
--rwxr-xr-x   1 root root      3833 Nov  5 00:29 ./source/x/tibmachuni-font-ttf/tibmachuni-font-ttf.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/ttf-indic-fonts
--rw-r--r--   1 root root      6168 May 14  2005 ./source/x/ttf-indic-fonts/COPYING.bz2
--rw-r--r--   1 root root     33862 Jan 30  2006 ./source/x/ttf-indic-fonts/Samyak_Malayalam.ttf.bz2
--rw-r--r--   1 root root       122 Sep 21  2006 ./source/x/ttf-indic-fonts/Samyak_Malayalam.url
--rw-r--r--   1 root root       170 Apr 22  2007 ./source/x/ttf-indic-fonts/doinst.sh.gz
--rw-r--r--   1 root root      1087 Sep 21  2006 ./source/x/ttf-indic-fonts/slack-desc
--rw-r--r--   1 root root   2925975 Dec 26  2006 ./source/x/ttf-indic-fonts/ttf-indic-fonts-0.4.7.4.tar.bz2
--rwxr-xr-x   1 root root      3351 May 19  2009 ./source/x/ttf-indic-fonts/ttf-indic-fonts.SlackBuild
--rw-r--r--   1 root root       757 Sep 21  2006 ./source/x/ttf-indic-fonts/ttf-indic-fonts.copyright.diff.gz
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/x/wqy-zenhei-font-ttf
--rw-r--r--   1 root root      1156 Feb 20  2008 ./source/x/wqy-zenhei-font-ttf/slack-desc
--rw-r--r--   1 root root   6649596 Apr 20  2009 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-0.8.38-1.tar.bz2
--rwxr-xr-x   1 root root      3953 May 19  2009 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-font-ttf.SlackBuild
-drwxr-xr-x  10 root root      4096 Jan  8 18:07 ./source/x/x11
-drwxr-xr-x   4 root root      4096 Mar 14 03:32 ./source/x/x11-skel
--rw-r--r--   1 root root       576 Mar 14 03:32 ./source/x/x11-skel/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Feb 14  2007 ./source/x/x11-skel/manpages
--rw-r--r--   1 root root      1060 May 31  2002 ./source/x/x11-skel/manpages/xwmconfig.1
-drwxr-xr-x   2 root root      4096 Feb 14  2007 ./source/x/x11-skel/scripts
--rw-r--r--   1 root root       358 Aug 10  2006 ./source/x/x11-skel/scripts/setup.xwmconfig
--rw-r--r--   1 root root     17100 Feb 12  2007 ./source/x/x11-skel/scripts/xorg.conf-fbdev
--rw-r--r--   1 root root     15858 Feb 12  2007 ./source/x/x11-skel/scripts/xorg.conf-vesa
--rw-r--r--   1 root root     12785 Aug 21  2006 ./source/x/x11-skel/scripts/xorgsetup
--rw-r--r--   1 root root      7460 Mar  9  2009 ./source/x/x11-skel/scripts/xwmconfig
--rw-r--r--   1 root root      1066 May 28  2007 ./source/x/x11-skel/slack-desc
--rwxr-xr-x   1 root root      2590 Mar 14 13:03 ./source/x/x11-skel/x11-skel.SlackBuild
--rw-r--r--   1 root root       183 May 30  2009 ./source/x/x11/arch.use.flags
-drwxr-xr-x   2 root root      4096 Apr 16 03:30 ./source/x/x11/build
--rw-r--r--   1 root root         2 Jun  3  2009 ./source/x/x11/build/gccmakedep
--rw-r--r--   1 root root         2 Apr 16 03:30 ./source/x/x11/build/libX11
--rw-r--r--   1 root root         2 Mar  4 22:05 ./source/x/x11/build/xcompmgr
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-input-acecad
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-input-penmount
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-cirrus
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-i740
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-mach64
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-openchrome
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-r128
--rw-r--r--   1 root root         2 Mar 14 04:00 ./source/x/x11/build/xf86-video-radeonhd
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-s3
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-s3virge
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-tdfx
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-tga
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-v4l
--rw-r--r--   1 root root         2 Jun  8  2010 ./source/x/x11/build/xf86-video-vesa
-drwxr-xr-x   2 root root      4096 Dec 13 03:06 ./source/x/x11/configure
--rw-r--r--   1 root root       391 Apr  2 21:17 ./source/x/x11/configure/compiz
--rw-r--r--   1 root root       317 Nov  5 06:13 ./source/x/x11/configure/configure
--rw-r--r--   1 root root       341 Nov 13 18:36 ./source/x/x11/configure/font-bh-ttf
--rw-r--r--   1 root root       297 Oct 20  2009 ./source/x/x11/configure/font-util
--rw-r--r--   1 root root       320 Nov 13 20:17 ./source/x/x11/configure/gccmakedep
--rw-r--r--   1 root root       317 Dec  4 23:25 ./source/x/x11/configure/libX11
--rw-r--r--   1 root root       320 Nov 13 19:40 ./source/x/x11/configure/libXp
--rw-r--r--   1 root root       304 Oct 14  2008 ./source/x/x11/configure/libXt
--rw-r--r--   1 root root       384 Jul 10  2009 ./source/x/x11/configure/pixman
--rw-r--r--   1 root root       276 Jul 24  2009 ./source/x/x11/configure/setxkbmap
--rw-r--r--   1 root root       421 May  2  2010 ./source/x/x11/configure/xf86-input-vmmouse
--rw-r--r--   1 root root       629 Dec 19 06:51 ./source/x/x11/configure/xf86-video-ati
--rw-r--r--   1 root root       262 Dec 13 03:07 ./source/x/x11/configure/xf86-video-nouveau
--rw-r--r--   1 root root       282 Aug  1  2009 ./source/x/x11/configure/xfs
--rw-r--r--   1 root root       276 Jul 24  2009 ./source/x/x11/configure/xkbcomp
--rw-r--r--   1 root root       345 Oct 14  2008 ./source/x/x11/configure/xkeyboard-config
--rw-r--r--   1 root root       377 Dec 19 06:52 ./source/x/x11/configure/xorg-docs
--rw-r--r--   1 root root      1410 Feb  9 02:41 ./source/x/x11/configure/xorg-server
-drwxr-xr-x   2 root root      4096 Aug  1  2009 ./source/x/x11/doinst.sh
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-adobe-100dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-adobe-75dpi
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-adobe-utopia-100dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-adobe-utopia-75dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-adobe-utopia-type1
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-arabic-misc
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-100dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-75dpi
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-lucidatypewriter-100dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-lucidatypewriter-75dpi
--rw-r--r--   1 root root       234 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-ttf
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-bh-type1
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-bitstream-100dpi
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-bitstream-75dpi
--rw-r--r--   1 root root       237 Mar 24  2007 ./source/x/x11/doinst.sh/font-bitstream-speedo
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-bitstream-type1
--rw-r--r--   1 root root       239 Mar 24  2007 ./source/x/x11/doinst.sh/font-cronyx-cyrillic
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-cursor-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-daewoo-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-dec-misc
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-ibm-type1
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-isas-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-jis-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-micro-misc
--rw-r--r--   1 root root       239 Mar 24  2007 ./source/x/x11/doinst.sh/font-misc-cyrillic
--rw-r--r--   1 root root       300 Mar 24  2007 ./source/x/x11/doinst.sh/font-misc-ethiopic
--rw-r--r--   1 root root       234 Mar 24  2007 ./source/x/x11/doinst.sh/font-misc-meltho
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-misc-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-mutt-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-schumacher-misc
--rw-r--r--   1 root root       239 Mar 24  2007 ./source/x/x11/doinst.sh/font-screen-cyrillic
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-sony-misc
--rw-r--r--   1 root root       301 Mar 24  2007 ./source/x/x11/doinst.sh/font-sun-misc
--rw-r--r--   1 root root       239 Mar 24  2007 ./source/x/x11/doinst.sh/font-winitzki-cyrillic
--rw-r--r--   1 root root       236 Mar 24  2007 ./source/x/x11/doinst.sh/font-xfree86-type1
--rw-r--r--   1 root root       447 Feb 14  2007 ./source/x/x11/doinst.sh/xdm
--rw-r--r--   1 root root       377 Aug  1  2009 ./source/x/x11/doinst.sh/xfs
--rw-r--r--   1 root root       176 Jul  1  2007 ./source/x/x11/doinst.sh/xinit
--rw-r--r--   1 root root       247 Jun  9  2007 ./source/x/x11/doinst.sh/xkeyboard-config
--rw-r--r--   1 root root       212 Feb 13  2007 ./source/x/x11/doinst.sh/xorg-cf-files
-drwxr-xr-x   2 root root      4096 May 30  2009 ./source/x/x11/makepkg
--rw-r--r--   1 root root      2198 Jun  3  2009 ./source/x/x11/makepkg/xorg-server
--rw-r--r--   1 root root      3645 Aug 31  2010 ./source/x/x11/modularize
--rw-r--r--   1 root root      1287 Mar  9 04:43 ./source/x/x11/noarch
--rw-r--r--   1 root root       726 Jun  8  2009 ./source/x/x11/package-blacklist
-drwxr-xr-x   4 root root      4096 Apr 16 03:29 ./source/x/x11/patch
--rw-r--r--   1 root root       326 Nov 13 18:39 ./source/x/x11/patch/README
-drwxr-xr-x   2 root root      4096 Mar  3 03:14 ./source/x/x11/patch/xcompmgr
--rw-r--r--   1 root root       154 Mar  3 03:15 ./source/x/x11/patch/xcompmgr.patch
--rw-r--r--   1 root root       464 Mar  3 03:11 ./source/x/x11/patch/xcompmgr/xcompmgr-follow-icccm-spec.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 18 03:42 ./source/x/x11/patch/xorg-server
--rw-r--r--   1 root root       446 Mar 18 03:42 ./source/x/x11/patch/xorg-server.patch
--rw-r--r--   1 root root       245 May 30  2009 ./source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff.gz
--rw-r--r--   1 root root       221 Apr 29  2010 ./source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff.gz
--rw-r--r--   1 root root       266 Nov 18 22:57 ./source/x/x11/patch/xorg-server/xorg-server.try_nouveau.diff.gz
-drwxr-xr-x   9 root root      4096 Apr 16 03:29 ./source/x/x11/post-install
--rw-r--r--   1 root root       357 Feb 16  2007 ./source/x/x11/post-install/beforelight.post-install
--rw-r--r--   1 root root       275 Feb 14  2007 ./source/x/x11/post-install/encodings.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-adobe-100dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-adobe-75dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-adobe-utopia-100dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-adobe-utopia-75dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-adobe-utopia-type1.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-alias.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-arabic-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-100dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-75dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-lucidatypewriter-100dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-lucidatypewriter-75dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-ttf.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bh-type1.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bitstream-100dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bitstream-75dpi.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bitstream-speedo.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-bitstream-type1.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-cronyx-cyrillic.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-cursor-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-daewoo-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-dec-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-ibm-type1.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-isas-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-jis-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-micro-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-misc-cyrillic.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-misc-ethiopic.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-misc-meltho.post-install
--rw-r--r--   1 root root       664 Feb  1  2008 ./source/x/x11/post-install/font-misc-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-mutt-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-schumacher-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-screen-cyrillic.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-sony-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-sun-misc.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-util.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-winitzki-cyrillic.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/font-xfree86-type1.post-install
--rw-r--r--   1 root root       110 Feb 13  2007 ./source/x/x11/post-install/lbxproxy.post-install
--rw-r--r--   1 root root        58 Nov  5 06:08 ./source/x/x11/post-install/libSM.post-install
-drwxr-xr-x   2 root root      4096 Apr 16 03:28 ./source/x/x11/post-install/libX11
--rw-r--r--   1 root root       102 Apr 16 03:30 ./source/x/x11/post-install/libX11.post-install
--rw-r--r--   1 root root      3050 Feb 22  2010 ./source/x/x11/post-install/libX11/XKeysymDB.gz
--rw-r--r--   1 root root      1765 Jun  8  2009 ./source/x/x11/post-install/libXaw.post-install
--rw-r--r--   1 root root       183 Feb 14  2007 ./source/x/x11/post-install/libpthread-stubs.post-install
--rw-r--r--   1 root root      2320 Jun  3  2009 ./source/x/x11/post-install/libxcb.post-install
-drwxr-xr-x   2 root root      4096 Mar 24  2007 ./source/x/x11/post-install/mkfontdir
--rw-r--r--   1 root root       221 Mar 24  2007 ./source/x/x11/post-install/mkfontdir.post-install
--rw-r--r--   1 root root      1012 Mar 23  2007 ./source/x/x11/post-install/mkfontdir/setup.04.mkfontdir
--rw-r--r--   1 root root       286 Apr 26  2008 ./source/x/x11/post-install/pixman.post-install
--rw-r--r--   1 root root       112 Feb 13  2007 ./source/x/x11/post-install/proxymngr.post-install
--rw-r--r--   1 root root       106 Feb 13  2007 ./source/x/x11/post-install/rstart.post-install
-drwxr-xr-x   2 root root      4096 Feb 22  2007 ./source/x/x11/post-install/twm
--rw-r--r--   1 root root       175 Feb 22  2007 ./source/x/x11/post-install/twm.post-install
--rw-r--r--   1 root root       725 Dec  1  2009 ./source/x/x11/post-install/twm/xinitrc.twm
--rw-r--r--   1 root root        63 Dec 15  2009 ./source/x/x11/post-install/util-macros.post-install
--rw-r--r--   1 root root       344 Feb 13  2007 ./source/x/x11/post-install/x11-app-test.post-install
--rw-r--r--   1 root root       275 Feb 13  2007 ./source/x/x11/post-install/x11-font.post-install
--rw-r--r--   1 root root        68 Feb 13  2007 ./source/x/x11/post-install/x11-util.post-install
--rw-r--r--   1 root root        63 Dec 15  2009 ./source/x/x11/post-install/xbitmaps.post-install
--rw-r--r--   1 root root       155 Feb 14  2007 ./source/x/x11/post-install/xcb-proto.post-install
-drwxr-xr-x   2 root root      4096 Feb 14  2007 ./source/x/x11/post-install/xdm
--rw-r--r--   1 root root       671 Mar 12  2010 ./source/x/x11/post-install/xdm.post-install
--rwxr-xr-x   1 root root      5470 Jan 23 19:01 ./source/x/x11/post-install/xdm/Xsession
--rwxr-xr-x   1 root root       708 Feb 17  2001 ./source/x/x11/post-install/xdm/Xsession.orig
--rwxr-xr-x   1 root root       503 Feb 14  2007 ./source/x/x11/post-install/xdm/Xsetup_0
--rwxr-xr-x   1 root root       145 Feb 13  2007 ./source/x/x11/post-install/xdm/Xsetup_0.orig
--rw-r--r--   1 root root        40 Sep 15  2008 ./source/x/x11/post-install/xf86-input-joystick.post-install
-drwxr-xr-x   2 root root      4096 Aug  3  2010 ./source/x/x11/post-install/xf86-input-synaptics
--rw-r--r--   1 root root       373 Aug  3  2010 ./source/x/x11/post-install/xf86-input-synaptics.post-install
--rw-r--r--   1 root root       444 Nov  1 01:13 ./source/x/x11/post-install/xf86-input-synaptics/50-synaptics.conf
--rw-r--r--   1 root root        54 Aug  1  2009 ./source/x/x11/post-install/xfs.post-install
-drwxr-xr-x   2 root root      4096 Jul  1  2007 ./source/x/x11/post-install/xinit
--rw-r--r--   1 root root       637 Jul  1  2007 ./source/x/x11/post-install/xinit.post-install
--rw-r--r--   1 root root       321 Mar 16  2003 ./source/x/x11/post-install/xinit/README.Xmodmap
--rw-r--r--   1 root root       341 Feb 18  2007 ./source/x/x11/post-install/xkeyboard-config.post-install
-drwxr-xr-x   2 root root      4096 Aug 11  2009 ./source/x/x11/post-install/xorg-cf-files
--rw-r--r--   1 root root       237 Aug 11  2009 ./source/x/x11/post-install/xorg-cf-files.post-install
--rw-r--r--   1 root root       203 Aug 11  2009 ./source/x/x11/post-install/xorg-cf-files/x11.tmpl.lib64.kludge.diff.gz
--rw-r--r--   1 root root      2241 Dec 29 01:53 ./source/x/x11/post-install/xorg-server.post-install
--rw-r--r--   1 root root        63 Dec 19 06:16 ./source/x/x11/post-install/xorg-sgml-doctools.post-install
--rw-r--r--   1 root root        35 Nov  5 06:10 ./source/x/x11/post-install/xproto.post-install
--rw-r--r--   1 root root       100 Feb 13  2007 ./source/x/x11/post-install/xsm.post-install
-drwxr-xr-x   2 root root     12288 Nov  5 06:00 ./source/x/x11/slack-desc
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/applewmproto
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/appres
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/bdftopcf
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/beforelight
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/bigreqsproto
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/bitmap
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/compiz
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/compositeproto
--rw-r--r--   1 root root       755 May 30  2009 ./source/x/x11/slack-desc/constype
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/damageproto
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/dmxproto
--rw-r--r--   1 root root       769 Sep 18  2008 ./source/x/x11/slack-desc/dri2proto
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/editres
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/encodings
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/evieext
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/fixesproto
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/font-adobe-100dpi
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/font-adobe-75dpi
--rw-r--r--   1 root root       979 Feb 13  2007 ./source/x/x11/slack-desc/font-adobe-utopia-100dpi
--rw-r--r--   1 root root       965 Feb 13  2007 ./source/x/x11/slack-desc/font-adobe-utopia-75dpi
--rw-r--r--   1 root root       965 Feb 13  2007 ./source/x/x11/slack-desc/font-adobe-utopia-type1
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/font-alias
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/font-arabic-misc
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-100dpi
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-75dpi
--rw-r--r--   1 root root      1077 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi
--rw-r--r--   1 root root      1063 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-ttf
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/font-bh-type1
--rw-r--r--   1 root root       937 Feb 13  2007 ./source/x/x11/slack-desc/font-bitstream-100dpi
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/font-bitstream-75dpi
--rw-r--r--   1 root root       937 Feb 13  2007 ./source/x/x11/slack-desc/font-bitstream-speedo
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/font-bitstream-type1
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/font-cronyx-cyrillic
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/font-cursor-misc
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/font-daewoo-misc
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/font-dec-misc
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-ibm-type1
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-isas-misc
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/font-jis-misc
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/font-micro-misc
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/font-misc-cyrillic
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/font-misc-ethiopic
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/font-misc-meltho
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-misc-misc
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-mutt-misc
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/font-schumacher-misc
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/font-screen-cyrillic
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/font-sony-misc
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/font-sun-misc
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/font-util
--rw-r--r--   1 root root       951 Feb 13  2007 ./source/x/x11/slack-desc/font-winitzki-cyrillic
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/font-xfree86-type1
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/fontcacheproto
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/fontsproto
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/fonttosfnt
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/fslsfonts
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/fstobdf
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/gccmakedep
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/glproto
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/iceauth
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/ico
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/imake
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/inputproto
--rw-r--r--   1 root root       886 Jun  3  2009 ./source/x/x11/slack-desc/intel-gpu-tools
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/kbproto
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/lbxproxy
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libAppleWM
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libFS
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libICE
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libSM
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/libWindowsWM
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libX11
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/libXScrnSaver
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/libXTrap
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libXau
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libXaw
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/libXcomposite
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libXcursor
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libXdamage
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/libXdmcp
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/libXevie
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/libXext
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/libXfixes
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/libXfont
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/libXfontcache
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libXft
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libXi
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/libXinerama
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libXmu
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libXp
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libXpm
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/libXprintAppUtil
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/libXprintUtil
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/libXrandr
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libXrender
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/libXres
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libXt
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/libXtst
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/libXv
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/libXvMC
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/libXxf86dga
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/libXxf86misc
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libXxf86vm
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/libdmx
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libfontenc
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/liblbxutil
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/liboldX
--rw-r--r--   1 root root       811 Mar 10  2008 ./source/x/x11/slack-desc/libpciaccess
--rw-r--r--   1 root root       867 Feb 14  2007 ./source/x/x11/slack-desc/libpthread-stubs
--rw-r--r--   1 root root       903 Feb 14  2007 ./source/x/x11/slack-desc/libxcb
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/libxkbfile
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/libxkbui
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/listres
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/lndir
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/luit
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/makedepend
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/mkcomposecache
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/mkfontdir
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/mkfontscale
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/oclock
--rw-r--r--   1 root root       794 Sep 16  2007 ./source/x/x11/slack-desc/pixman
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/printproto
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/proxymngr
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/randrproto
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/recordproto
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/rendercheck
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/renderproto
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/resourceproto
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/rgb
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/rstart
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/scripts
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/scrnsaverproto
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/sessreg
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/setxkbmap
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/showfont
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/smproxy
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/trapproto
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/twm
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/util-macros
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/videoproto
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/viewres
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/windowswmproto
--rw-r--r--   1 root root       677 Feb  5  2007 ./source/x/x11/slack-desc/x11-app
--rw-r--r--   1 root root       601 Feb  5  2007 ./source/x/x11/slack-desc/x11-data
--rw-r--r--   1 root root       587 Feb  5  2007 ./source/x/x11/slack-desc/x11-doc
--rw-r--r--   1 root root       637 Feb  5  2007 ./source/x/x11/slack-desc/x11-driver
--rw-r--r--   1 root root       605 Feb  5  2007 ./source/x/x11/slack-desc/x11-font
--rw-r--r--   1 root root       598 Feb  5  2007 ./source/x/x11/slack-desc/x11-lib
--rw-r--r--   1 root root       621 Feb  5  2007 ./source/x/x11/slack-desc/x11-proto
--rw-r--r--   1 root root       613 Feb  5  2007 ./source/x/x11/slack-desc/x11-util
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/x11perf
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xauth
--rw-r--r--   1 root root       782 Sep 16  2007 ./source/x/x11/slack-desc/xbacklight
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xbiff
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xbitmaps
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xcalc
--rw-r--r--   1 root root       769 Feb 14  2007 ./source/x/x11/slack-desc/xcb-proto
--rw-r--r--   1 root root       756 May 30  2009 ./source/x/x11/slack-desc/xcb-util
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/xclipboard
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xclock
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/xcmiscproto
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xcmsdb
--rw-r--r--   1 root root       755 Mar 10  2008 ./source/x/x11/slack-desc/xcompmgr
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xconsole
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xcursor-themes
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/xcursorgen
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/xdbedizzy
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xditview
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xdm
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xdpyinfo
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xdriinfo
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xedit
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xev
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/xextproto
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xeyes
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-acecad
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-aiptek
--rw-r--r--   1 root root       895 Nov 19  2008 ./source/x/x11/slack-desc/xf86-input-calcomp
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-citron
--rw-r--r--   1 root root       951 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-digitaledge
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-dmc
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-dynapro
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-elo2300
--rw-r--r--   1 root root       951 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-elographics
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-evdev
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-fpit
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-hyperpen
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-jamstudio
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-joystick
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-keyboard
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-magellan
--rw-r--r--   1 root root       937 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-magictouch
--rw-r--r--   1 root root       937 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-microtouch
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-mouse
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-mutouch
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-palmax
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-penmount
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-spaceorb
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-summa
--rw-r--r--   1 root root       923 Nov 18  2008 ./source/x/x11/slack-desc/xf86-input-synaptics
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-tek4957
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-ur98
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-vmmouse
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-input-void
--rw-r--r--   1 root root       867 Nov 20  2009 ./source/x/x11/slack-desc/xf86-input-wacom
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-apm
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-ark
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-ast
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-ati
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-chips
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-cirrus
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-cyrix
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-dummy
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-fbdev
--rw-r--r--   1 root root       902 Apr  3  2008 ./source/x/x11/slack-desc/xf86-video-geode
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-glint
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-i128
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-i740
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-i810
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-impact
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-imstt
--rw-r--r--   1 root root       867 Mar  7  2007 ./source/x/x11/slack-desc/xf86-video-intel
--rw-r--r--   1 root root       881 Jul 10  2008 ./source/x/x11/slack-desc/xf86-video-mach64
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-mga
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-neomagic
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-newport
--rw-r--r--   1 root root       895 Aug 26  2010 ./source/x/x11/slack-desc/xf86-video-nouveau
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-nsc
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-nv
--rw-r--r--   1 root root       937 Nov 18  2008 ./source/x/x11/slack-desc/xf86-video-openchrome
--rw-r--r--   1 root root       853 Jul 10  2008 ./source/x/x11/slack-desc/xf86-video-r128
--rw-r--r--   1 root root       955 Apr 12  2008 ./source/x/x11/slack-desc/xf86-video-radeonhd
--rw-r--r--   1 root root       923 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-rendition
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-s3
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-s3virge
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-savage
--rw-r--r--   1 root root       979 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-siliconmotion
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-sis
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-sisusb
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-sunbw2
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-suncg14
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-suncg3
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-suncg6
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-sunffb
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-sunleo
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-suntcx
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-tdfx
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-tga
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-trident
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-tseng
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-v4l
--rw-r--r--   1 root root       955 Apr  6  2007 ./source/x/x11/slack-desc/xf86-video-vermilion
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-vesa
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-vga
--rw-r--r--   1 root root       839 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-via
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-vmware
--rw-r--r--   1 root root       881 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-voodoo
--rw-r--r--   1 root root       853 Feb 13  2007 ./source/x/x11/slack-desc/xf86-video-wsfb
--rw-r--r--   1 root root       839 Dec 15  2009 ./source/x/x11/slack-desc/xf86-video-xgi
--rw-r--r--   1 root root       867 Dec 15  2009 ./source/x/x11/slack-desc/xf86-video-xgixp
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86bigfontproto
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/xf86dga
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/xf86dgaproto
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/xf86driproto
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xf86miscproto
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xf86rushproto
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xf86vidmodeproto
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xfd
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/xfindproxy
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xfontsel
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xfs
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/xfsinfo
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xfwp
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xgamma
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xgc
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xhost
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xineramaproto
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xinit
--rw-r--r--   1 root root       923 Jan 31  2008 ./source/x/x11/slack-desc/xinput
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/xkbcomp
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/xkbdata
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xkbevd
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xkbprint
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xkbutils
--rw-r--r--   1 root root       867 Feb 13  2007 ./source/x/x11/slack-desc/xkeyboard-config
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xkill
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xload
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xlogo
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xlsatoms
--rw-r--r--   1 root root       783 Feb 13  2007 ./source/x/x11/slack-desc/xlsclients
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xlsfonts
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xmag
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xman
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xmessage
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xmh
--rw-r--r--   1 root root       741 Feb 13  2007 ./source/x/x11/slack-desc/xmodmap
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xmore
--rw-r--r--   1 root root       825 Feb 13  2007 ./source/x/x11/slack-desc/xorg-cf-files
--rw-r--r--   1 root root       769 Feb 13  2007 ./source/x/x11/slack-desc/xorg-docs
--rw-r--r--   1 root root      1160 Feb 13  2007 ./source/x/x11/slack-desc/xorg-server
--rw-r--r--   1 root root       901 Feb 14  2007 ./source/x/x11/slack-desc/xorg-server-xdmx
--rw-r--r--   1 root root       839 May 30  2009 ./source/x/x11/slack-desc/xorg-server-xephyr
--rw-r--r--   1 root root      1063 Feb 13  2007 ./source/x/x11/slack-desc/xorg-server-xnest
--rw-r--r--   1 root root      1160 Feb 13  2007 ./source/x/x11/slack-desc/xorg-server-xvfb
--rw-r--r--   1 root root       895 Feb 13  2007 ./source/x/x11/slack-desc/xorg-sgml-doctools
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/xphelloworld
--rw-r--r--   1 root root       811 Feb 13  2007 ./source/x/x11/slack-desc/xplsprinters
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xpr
--rw-r--r--   1 root root       909 Feb 13  2007 ./source/x/x11/slack-desc/xprehashprinterlist
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xprop
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xproto
--rw-r--r--   1 root root       979 Feb 13  2007 ./source/x/x11/slack-desc/xproxymanagementprotocol
--rw-r--r--   1 root root       700 May 30  2009 ./source/x/x11/slack-desc/xpyb
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xrandr
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xrdb
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xrefresh
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xrx
--rw-r--r--   1 root root       727 May 30  2009 ./source/x/x11/slack-desc/xscope
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xset
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xsetmode
--rw-r--r--   1 root root       797 Feb 13  2007 ./source/x/x11/slack-desc/xsetpointer
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xsetroot
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xsm
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xstdcmap
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xtrans
--rw-r--r--   1 root root       713 Feb 13  2007 ./source/x/x11/slack-desc/xtrap
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xvidtune
--rw-r--r--   1 root root       727 Feb 13  2007 ./source/x/x11/slack-desc/xvinfo
--rw-r--r--   1 root root       685 Feb 13  2007 ./source/x/x11/slack-desc/xwd
--rw-r--r--   1 root root       755 Feb 13  2007 ./source/x/x11/slack-desc/xwininfo
--rw-r--r--   1 root root       699 Feb 13  2007 ./source/x/x11/slack-desc/xwud
-drwxr-xr-x  12 root root      4096 Mar  5 01:42 ./source/x/x11/src
-drwxr-xr-x   2 root root      4096 Apr  6 04:27 ./source/x/x11/src/app
--rw-r--r--   1 root root     97604 Oct 31 18:51 ./source/x/x11/src/app/appres-1.0.3.tar.xz
--rw-r--r--   1 root root     97448 Oct 30 03:02 ./source/x/x11/src/app/bdftopcf-1.0.3.tar.xz
--rw-r--r--   1 root root    100340 Oct 30 19:19 ./source/x/x11/src/app/beforelight-1.0.4.tar.xz
--rw-r--r--   1 root root    140120 Oct  8  2010 ./source/x/x11/src/app/bitmap-1.0.5.tar.xz
--rw-r--r--   1 root root    942584 Mar 30 09:42 ./source/x/x11/src/app/compiz-0.8.8.tar.xz
--rw-r--r--   1 root root    136928 Oct 30 19:44 ./source/x/x11/src/app/editres-1.0.5.tar.xz
--rw-r--r--   1 root root     98084 May 10  2008 ./source/x/x11/src/app/fonttosfnt-1.0.4.tar.xz
--rw-r--r--   1 root root     99196 Oct 30 19:50 ./source/x/x11/src/app/fslsfonts-1.0.3.tar.xz
--rw-r--r--   1 root root    100464 Oct 30 20:03 ./source/x/x11/src/app/fstobdf-1.0.4.tar.xz
--rw-r--r--   1 root root    107064 Oct 30 04:51 ./source/x/x11/src/app/iceauth-1.0.4.tar.xz
--rw-r--r--   1 root root    107744 Oct 30 20:12 ./source/x/x11/src/app/ico-1.0.3.tar.xz
--rw-r--r--   1 root root    238960 Oct 13  2009 ./source/x/x11/src/app/intel-gpu-tools-1.0.2.tar.xz
--rw-r--r--   1 root root     93928 Dec 15  2009 ./source/x/x11/src/app/listres-1.0.2.tar.xz
--rw-r--r--   1 root root    120624 Oct  7  2010 ./source/x/x11/src/app/luit-1.1.0.tar.xz
--rw-r--r--   1 root root     90748 Oct 13  2009 ./source/x/x11/src/app/mkcomposecache-1.2.1.tar.xz
--rw-r--r--   1 root root     90880 Nov  7 19:18 ./source/x/x11/src/app/mkfontdir-1.0.6.tar.xz
--rw-r--r--   1 root root    110808 Oct 30 06:08 ./source/x/x11/src/app/mkfontscale-1.0.8.tar.xz
--rw-r--r--   1 root root    104140 Sep 23  2010 ./source/x/x11/src/app/oclock-1.0.2.tar.xz
--rw-r--r--   1 root root    115856 Nov 22 02:56 ./source/x/x11/src/app/rendercheck-1.4.tar.xz
--rw-r--r--   1 root root    110304 Oct  7  2010 ./source/x/x11/src/app/rgb-1.0.4.tar.xz
--rw-r--r--   1 root root    104316 Jun  4  2010 ./source/x/x11/src/app/sessreg-1.0.6.tar.xz
--rw-r--r--   1 root root    104700 Sep 23  2010 ./source/x/x11/src/app/setxkbmap-1.2.0.tar.xz
--rw-r--r--   1 root root     99616 Oct 30 21:57 ./source/x/x11/src/app/showfont-1.0.3.tar.xz
--rw-r--r--   1 root root    104564 Oct 21  2010 ./source/x/x11/src/app/smproxy-1.0.4.tar.xz
--rw-r--r--   1 root root    238008 Jan  5 22:12 ./source/x/x11/src/app/twm-1.0.6.tar.xz
--rw-r--r--   1 root root    106276 Oct 30 22:18 ./source/x/x11/src/app/viewres-1.0.3.tar.xz
--rw-r--r--   1 root root    149484 Jan  6 00:36 ./source/x/x11/src/app/x11perf-1.5.3.tar.xz
--rw-r--r--   1 root root    120104 Sep 24  2010 ./source/x/x11/src/app/xauth-1.0.5.tar.xz
--rw-r--r--   1 root root     95900 Dec  9 07:13 ./source/x/x11/src/app/xbacklight-1.1.2.tar.xz
--rw-r--r--   1 root root    107328 Jan 25 20:45 ./source/x/x11/src/app/xbiff-1.0.3.tar.xz
--rw-r--r--   1 root root    114364 Nov 26 21:56 ./source/x/x11/src/app/xcalc-1.0.4.1.tar.xz
--rw-r--r--   1 root root    106200 Nov  9 06:56 ./source/x/x11/src/app/xclipboard-1.1.1.tar.xz
--rw-r--r--   1 root root    122220 Sep 24  2010 ./source/x/x11/src/app/xclock-1.0.5.tar.xz
--rw-r--r--   1 root root    113140 Sep 24  2010 ./source/x/x11/src/app/xcmsdb-1.0.3.tar.xz
--rw-r--r--   1 root root    102928 Nov  2  2009 ./source/x/x11/src/app/xcompmgr-1.1.5.tar.xz
--rw-r--r--   1 root root    106728 Sep 24  2010 ./source/x/x11/src/app/xconsole-1.0.4.tar.xz
--rw-r--r--   1 root root     98912 Sep 24  2010 ./source/x/x11/src/app/xcursorgen-1.0.4.tar.xz
--rw-r--r--   1 root root    102156 Oct 31 17:10 ./source/x/x11/src/app/xdbedizzy-1.1.0.tar.xz
--rw-r--r--   1 root root    120980 Aug  6  2010 ./source/x/x11/src/app/xditview-1.0.2.tar.xz
--rw-r--r--   1 root root    356384 Apr 10  2010 ./source/x/x11/src/app/xdm-1.1.10.tar.xz
--rw-r--r--   1 root root    112608 Oct  3  2010 ./source/x/x11/src/app/xdpyinfo-1.2.0.tar.xz
--rw-r--r--   1 root root     97056 Nov  9 07:03 ./source/x/x11/src/app/xdriinfo-1.0.4.tar.xz
--rw-r--r--   1 root root    457836 Oct 30 22:30 ./source/x/x11/src/app/xedit-1.2.0.tar.xz
--rw-r--r--   1 root root    102524 Oct 30 16:04 ./source/x/x11/src/app/xev-1.1.0.tar.xz
--rw-r--r--   1 root root    105108 Nov 25 07:30 ./source/x/x11/src/app/xeyes-1.1.1.tar.xz
--rw-r--r--   1 root root     97320 Oct 31 18:20 ./source/x/x11/src/app/xf86dga-1.0.3.tar.xz
--rw-r--r--   1 root root    111984 Oct 21  2010 ./source/x/x11/src/app/xfd-1.1.0.tar.xz
--rw-r--r--   1 root root    115868 Sep 27  2010 ./source/x/x11/src/app/xfontsel-1.0.3.tar.xz
--rw-r--r--   1 root root    193808 Oct 30 22:40 ./source/x/x11/src/app/xfs-1.1.1.tar.xz
--rw-r--r--   1 root root     97452 Oct 30 22:56 ./source/x/x11/src/app/xfsinfo-1.0.3.tar.xz
--rw-r--r--   1 root root     97192 Nov  9 07:50 ./source/x/x11/src/app/xgamma-1.0.4.tar.xz
--rw-r--r--   1 root root    154592 Oct 30 23:35 ./source/x/x11/src/app/xgc-1.0.3.tar.xz
--rw-r--r--   1 root root    106456 Oct 30 16:54 ./source/x/x11/src/app/xhost-1.0.4.tar.xz
--rw-r--r--   1 root root    125352 Oct 30 23:45 ./source/x/x11/src/app/xinit-1.3.0.tar.xz
--rw-r--r--   1 root root    120504 Nov 11 04:01 ./source/x/x11/src/app/xinput-1.5.3.tar.xz
--rw-r--r--   1 root root    196140 Feb 10 23:08 ./source/x/x11/src/app/xkbcomp-1.2.1.tar.xz
--rw-r--r--   1 root root    126624 Dec  9 05:57 ./source/x/x11/src/app/xkbevd-1.1.2.tar.xz
--rw-r--r--   1 root root    133736 Jan  8 03:10 ./source/x/x11/src/app/xkbprint-1.0.3.tar.xz
--rw-r--r--   1 root root    110104 Oct 30 17:15 ./source/x/x11/src/app/xkbutils-1.0.3.tar.xz
--rw-r--r--   1 root root    100368 Nov 11 03:28 ./source/x/x11/src/app/xkill-1.0.3.tar.xz
--rw-r--r--   1 root root    112172 Sep 26  2010 ./source/x/x11/src/app/xload-1.1.0.tar.xz
--rw-r--r--   1 root root    106752 Oct 31 00:02 ./source/x/x11/src/app/xlogo-1.0.3.tar.xz
--rw-r--r--   1 root root     96240 Jun  3  2010 ./source/x/x11/src/app/xlsatoms-1.1.0.tar.xz
--rw-r--r--   1 root root    101680 Sep 24  2010 ./source/x/x11/src/app/xlsclients-1.1.1.tar.xz
--rw-r--r--   1 root root    103228 Jun 11  2010 ./source/x/x11/src/app/xlsfonts-1.0.3.tar.xz
--rw-r--r--   1 root root    115872 Oct 31 00:23 ./source/x/x11/src/app/xmag-1.0.4.tar.xz
--rw-r--r--   1 root root    151824 Oct 31 00:40 ./source/x/x11/src/app/xman-1.1.1.tar.xz
--rw-r--r--   1 root root    101600 Jan 30  2010 ./source/x/x11/src/app/xmessage-1.0.3.tar.xz
--rw-r--r--   1 root root    173752 Oct 31 00:47 ./source/x/x11/src/app/xmh-1.0.2.tar.xz
--rw-r--r--   1 root root    115976 Sep 24  2010 ./source/x/x11/src/app/xmodmap-1.0.5.tar.xz
--rw-r--r--   1 root root     99592 Jul 23  2010 ./source/x/x11/src/app/xmore-1.0.2.tar.xz
--rw-r--r--   1 root root     64084 Jan 18  2006 ./source/x/x11/src/app/xphelloworld-1.0.1.tar.xz
--rw-r--r--   1 root root    117216 Oct 17  2009 ./source/x/x11/src/app/xpr-1.0.3.tar.xz
--rw-r--r--   1 root root    118436 Oct 30 18:19 ./source/x/x11/src/app/xprop-1.2.0.tar.xz
--rw-r--r--   1 root root    136704 Oct 30 18:29 ./source/x/x11/src/app/xrandr-1.3.4.tar.xz
--rw-r--r--   1 root root    110064 Apr  5 16:02 ./source/x/x11/src/app/xrdb-1.0.9.tar.xz
--rw-r--r--   1 root root     97992 Nov 11 03:55 ./source/x/x11/src/app/xrefresh-1.0.4.tar.xz
--rw-r--r--   1 root root    164512 Oct 31 01:31 ./source/x/x11/src/app/xscope-1.3.tar.xz
--rw-r--r--   1 root root    115132 Nov 11 04:03 ./source/x/x11/src/app/xset-1.2.1.tar.xz
--rw-r--r--   1 root root    100688 Oct 30 18:48 ./source/x/x11/src/app/xsetroot-1.1.0.tar.xz
--rw-r--r--   1 root root    136804 Sep 27  2010 ./source/x/x11/src/app/xsm-1.0.2.tar.xz
--rw-r--r--   1 root root     98468 Sep 27  2010 ./source/x/x11/src/app/xstdcmap-1.0.2.tar.xz
--rw-r--r--   1 root root    103856 Jan 16  2010 ./source/x/x11/src/app/xvidtune-1.0.2.tar.xz
--rw-r--r--   1 root root     98216 Nov  6 16:01 ./source/x/x11/src/app/xvinfo-1.1.1.tar.xz
--rw-r--r--   1 root root    117680 Nov  7 18:19 ./source/x/x11/src/app/xwd-1.0.4.tar.xz
--rw-r--r--   1 root root    120696 Oct 30 18:59 ./source/x/x11/src/app/xwininfo-1.1.1.tar.xz
--rw-r--r--   1 root root    104868 Nov  7 18:45 ./source/x/x11/src/app/xwud-1.0.3.tar.xz
-drwxr-xr-x   2 root root      4096 Apr  7 18:05 ./source/x/x11/src/data
--rw-r--r--   1 root root    107168 Dec  9 06:29 ./source/x/x11/src/data/xbitmaps-1.1.1.tar.xz
--rw-r--r--   1 root root   1482588 Oct 30 15:59 ./source/x/x11/src/data/xcursor-themes-1.0.3.tar.xz
--rw-r--r--   1 root root    591624 Apr  5 22:52 ./source/x/x11/src/data/xkeyboard-config-2.2.1.tar.xz
-drwxr-xr-x   2 root root      4096 Apr  6 04:28 ./source/x/x11/src/doc
--rw-r--r--   1 root root    311768 Dec 19 06:46 ./source/x/x11/src/doc/xorg-docs-1.6.tar.xz
--rw-r--r--   1 root root     97492 Mar 29 20:38 ./source/x/x11/src/doc/xorg-sgml-doctools-1.7.tar.xz
-drwxr-xr-x   2 root root      4096 Apr 16 03:15 ./source/x/x11/src/driver
--rw-r--r--   1 root root    210288 Oct 13  2009 ./source/x/x11/src/driver/xf86-input-acecad-1.4.0.tar.xz
--rw-r--r--   1 root root    224004 Aug 10  2010 ./source/x/x11/src/driver/xf86-input-aiptek-1.3.1.tar.xz
--rw-r--r--   1 root root    277992 Jan 11 02:50 ./source/x/x11/src/driver/xf86-input-evdev-2.6.0.tar.xz
--rw-r--r--   1 root root    231760 Oct 31  2009 ./source/x/x11/src/driver/xf86-input-joystick-1.5.0.tar.xz
--rw-r--r--   1 root root    246540 Mar  7 23:44 ./source/x/x11/src/driver/xf86-input-keyboard-1.6.0.tar.xz
--rw-r--r--   1 root root    272068 Mar  9 22:34 ./source/x/x11/src/driver/xf86-input-mouse-1.7.0.tar.xz
--rw-r--r--   1 root root    206712 Mar  4  2010 ./source/x/x11/src/driver/xf86-input-penmount-1.4.1.tar.xz
--rw-r--r--   1 root root    339044 Mar  4 02:43 ./source/x/x11/src/driver/xf86-input-synaptics-1.4.0.tar.xz
--rw-r--r--   1 root root    225404 Mar  2 11:05 ./source/x/x11/src/driver/xf86-input-vmmouse-12.7.0.tar.xz
--rw-r--r--   1 root root    214308 Oct 30 16:27 ./source/x/x11/src/driver/xf86-input-void-1.3.1.tar.xz
--rw-r--r--   1 root root    383204 Feb 17 01:39 ./source/x/x11/src/driver/xf86-input-wacom-0.10.11.tar.xz
--rw-r--r--   1 root root    247284 Jul 23  2010 ./source/x/x11/src/driver/xf86-video-apm-1.2.3.tar.xz
--rw-r--r--   1 root root    214660 Jul 23  2010 ./source/x/x11/src/driver/xf86-video-ark-0.7.3.tar.xz
--rw-r--r--   1 root root    231564 Aug 10  2010 ./source/x/x11/src/driver/xf86-video-ast-0.91.10.tar.xz
--rw-r--r--   1 root root    859448 Mar 17 23:07 ./source/x/x11/src/driver/xf86-video-ati-6.14.1.tar.xz
--rw-r--r--   1 root root    304560 Feb 27 16:21 ./source/x/x11/src/driver/xf86-video-chips-1.2.4.tar.xz
--rw-r--r--   1 root root    223812 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-cirrus-1.3.2.tar.xz
--rw-r--r--   1 root root    207756 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-dummy-0.3.4.tar.xz
--rw-r--r--   1 root root    524676 Nov  9 09:31 ./source/x/x11/src/driver/xf86-video-geode-2.11.10.tar.xz
--rw-r--r--   1 root root    314196 Sep 11  2010 ./source/x/x11/src/driver/xf86-video-glint-1.2.5.tar.xz
--rw-r--r--   1 root root    240280 Aug 10  2010 ./source/x/x11/src/driver/xf86-video-i128-1.3.4.tar.xz
--rw-r--r--   1 root root    209584 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-i740-1.3.2.tar.xz
--rw-r--r--   1 root root    775108 Apr 14 09:21 ./source/x/x11/src/driver/xf86-video-intel-2.15.0.tar.xz
--rw-r--r--   1 root root    416140 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-mach64-6.8.2.tar.xz
--rw-r--r--   1 root root    355800 Aug 10  2010 ./source/x/x11/src/driver/xf86-video-mga-1.4.13.tar.xz
--rw-r--r--   1 root root    242244 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-neomagic-1.2.5.tar.xz
--rw-r--r--   1 root root   5002204 Dec 13 03:05 ./source/x/x11/src/driver/xf86-video-nouveau-8bb82312.tar.xz
--rw-r--r--   1 root root    303492 Jul 30  2010 ./source/x/x11/src/driver/xf86-video-nv-2.1.18.tar.xz
--rw-r--r--   1 root root    373296 Oct 13  2009 ./source/x/x11/src/driver/xf86-video-openchrome-0.2.904.tar.xz
--rw-r--r--   1 root root    351232 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-r128-6.8.1.tar.xz
--rw-r--r--   1 root root    656376 Oct 13  2009 ./source/x/x11/src/driver/xf86-video-radeonhd-1.3.0.tar.xz
--rw-r--r--   1 root root    262936 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-rendition-4.2.4.tar.xz
--rw-r--r--   1 root root    214920 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-s3-0.6.3.tar.xz
--rw-r--r--   1 root root    236912 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-s3virge-1.10.4.tar.xz
--rw-r--r--   1 root root    310764 Dec  5 09:13 ./source/x/x11/src/driver/xf86-video-savage-2.3.2.tar.xz
--rw-r--r--   1 root root    296928 Feb 27 16:23 ./source/x/x11/src/driver/xf86-video-siliconmotion-1.7.5.tar.xz
--rw-r--r--   1 root root    557304 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-sis-0.10.3.tar.xz
--rw-r--r--   1 root root    290200 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-sisusb-0.9.4.tar.xz
--rw-r--r--   1 root root    227984 Jul 30  2009 ./source/x/x11/src/driver/xf86-video-tdfx-1.4.3.tar.xz
--rw-r--r--   1 root root    214348 Oct 13  2009 ./source/x/x11/src/driver/xf86-video-tga-1.2.1.tar.xz
--rw-r--r--   1 root root    260916 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-trident-1.3.4.tar.xz
--rw-r--r--   1 root root    246852 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-tseng-1.2.4.tar.xz
--rw-r--r--   1 root root    183872 Mar 19  2008 ./source/x/x11/src/driver/xf86-video-v4l-0.2.0.tar.xz
--rw-r--r--   1 root root    217708 Jan  4  2010 ./source/x/x11/src/driver/xf86-video-vesa-2.3.0.tar.xz
--rw-r--r--   1 root root    260648 Nov  9 13:57 ./source/x/x11/src/driver/xf86-video-vmware-11.0.3.tar.xz
--rw-r--r--   1 root root    222360 Jul  5  2010 ./source/x/x11/src/driver/xf86-video-voodoo-1.2.4.tar.xz
--rw-r--r--   1 root root    411440 Aug 10  2010 ./source/x/x11/src/driver/xf86-video-xgi-1.6.0.tar.xz
-drwxr-xr-x   2 root root      4096 Nov 16 20:36 ./source/x/x11/src/font
--rw-r--r--   1 root root    291832 Oct 30 03:55 ./source/x/x11/src/font/encodings-1.0.4.tar.xz
--rw-r--r--   1 root root    945192 Nov 14 23:54 ./source/x/x11/src/font/font-adobe-100dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    796356 Nov 14 23:54 ./source/x/x11/src/font/font-adobe-75dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    296996 Nov 14 23:59 ./source/x/x11/src/font/font-adobe-utopia-100dpi-1.0.4.tar.xz
--rw-r--r--   1 root root    247800 Nov 15 00:02 ./source/x/x11/src/font/font-adobe-utopia-75dpi-1.0.4.tar.xz
--rw-r--r--   1 root root    263520 Nov 15 00:05 ./source/x/x11/src/font/font-adobe-utopia-type1-1.0.4.tar.xz
--rw-r--r--   1 root root     92712 Oct  5  2010 ./source/x/x11/src/font/font-alias-1.0.3.tar.xz
--rw-r--r--   1 root root    101872 Nov 15 19:55 ./source/x/x11/src/font/font-arabic-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    589148 Nov 15 20:01 ./source/x/x11/src/font/font-bh-100dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    489900 Nov 15 20:06 ./source/x/x11/src/font/font-bh-75dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    216368 Nov 15 20:11 ./source/x/x11/src/font/font-bh-lucidatypewriter-100dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    193720 Nov 15 20:16 ./source/x/x11/src/font/font-bh-lucidatypewriter-75dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    367740 Nov 11 05:26 ./source/x/x11/src/font/font-bh-ttf-1.0.3.tar.xz
--rw-r--r--   1 root root    628208 Nov 15 20:36 ./source/x/x11/src/font/font-bh-type1-1.0.3.tar.xz
--rw-r--r--   1 root root    172716 Nov 15 20:39 ./source/x/x11/src/font/font-bitstream-100dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    155516 Nov 15 20:46 ./source/x/x11/src/font/font-bitstream-75dpi-1.0.3.tar.xz
--rw-r--r--   1 root root    329196 Nov 15 20:53 ./source/x/x11/src/font/font-bitstream-speedo-1.0.2.tar.xz
--rw-r--r--   1 root root    390700 Nov 15 20:56 ./source/x/x11/src/font/font-bitstream-type1-1.0.3.tar.xz
--rw-r--r--   1 root root    236644 Nov 15 21:06 ./source/x/x11/src/font/font-cronyx-cyrillic-1.0.3.tar.xz
--rw-r--r--   1 root root     94716 Nov 15 21:14 ./source/x/x11/src/font/font-cursor-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    508312 Nov 15 21:20 ./source/x/x11/src/font/font-daewoo-misc-1.0.3.tar.xz
--rw-r--r--   1 root root     92740 Nov 15 21:25 ./source/x/x11/src/font/font-dec-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    374360 Nov 15 21:33 ./source/x/x11/src/font/font-ibm-type1-1.0.3.tar.xz
--rw-r--r--   1 root root    719756 Nov 15 22:21 ./source/x/x11/src/font/font-isas-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    517868 Nov 15 22:34 ./source/x/x11/src/font/font-jis-misc-1.0.3.tar.xz
--rw-r--r--   1 root root     91408 Nov 15 22:38 ./source/x/x11/src/font/font-micro-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    121968 Nov 15 22:42 ./source/x/x11/src/font/font-misc-cyrillic-1.0.3.tar.xz
--rw-r--r--   1 root root    218584 Nov 15 22:46 ./source/x/x11/src/font/font-misc-ethiopic-1.0.3.tar.xz
--rw-r--r--   1 root root    828248 Nov 15 22:52 ./source/x/x11/src/font/font-misc-meltho-1.0.3.tar.xz
--rw-r--r--   1 root root   1423336 Nov 15 23:06 ./source/x/x11/src/font/font-misc-misc-1.1.2.tar.xz
--rw-r--r--   1 root root    217292 Nov 15 23:09 ./source/x/x11/src/font/font-mutt-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    128096 Nov 15 23:12 ./source/x/x11/src/font/font-schumacher-misc-1.1.2.tar.xz
--rw-r--r--   1 root root     95876 Nov 15 23:14 ./source/x/x11/src/font/font-screen-cyrillic-1.0.4.tar.xz
--rw-r--r--   1 root root     99540 Nov 15 23:18 ./source/x/x11/src/font/font-sony-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    106568 Nov 15 23:20 ./source/x/x11/src/font/font-sun-misc-1.0.3.tar.xz
--rw-r--r--   1 root root    119952 Oct 14  2010 ./source/x/x11/src/font/font-util-1.2.0.tar.xz
--rw-r--r--   1 root root     93740 Nov 15 23:21 ./source/x/x11/src/font/font-winitzki-cyrillic-1.0.3.tar.xz
--rw-r--r--   1 root root    117928 Nov 15 23:23 ./source/x/x11/src/font/font-xfree86-type1-1.0.4.tar.xz
--rwxr-xr-x   1 root root       897 Jan 31 07:24 ./source/x/x11/src/get-xf86-video-nouveau.sh
-drwxr-xr-x   2 root root      4096 Apr  6 04:05 ./source/x/x11/src/lib
--rw-r--r--   1 root root    236792 Oct 27 01:49 ./source/x/x11/src/lib/libFS-1.0.3.tar.xz
--rw-r--r--   1 root root    269404 Oct 19  2010 ./source/x/x11/src/lib/libICE-1.0.7.tar.xz
--rw-r--r--   1 root root    256596 Oct 28 05:32 ./source/x/x11/src/lib/libSM-1.2.0.tar.xz
--rw-r--r--   1 root root   1717272 Apr  5 21:04 ./source/x/x11/src/lib/libX11-1.4.3.tar.xz
--rw-r--r--   1 root root    220360 Oct 30 05:22 ./source/x/x11/src/lib/libXScrnSaver-1.2.1.tar.xz
--rw-r--r--   1 root root    215724 Jul 19  2010 ./source/x/x11/src/lib/libXau-1.0.6.tar.xz
--rw-r--r--   1 root root    546976 Jan 12 01:18 ./source/x/x11/src/lib/libXaw-1.0.9.tar.xz
--rw-r--r--   1 root root    220776 Oct 28 05:41 ./source/x/x11/src/lib/libXcomposite-0.4.3.tar.xz
--rw-r--r--   1 root root    233248 Oct 28 05:51 ./source/x/x11/src/lib/libXcursor-1.1.11.tar.xz
--rw-r--r--   1 root root    208192 Jun  9  2010 ./source/x/x11/src/lib/libXdamage-1.1.3.tar.xz
--rw-r--r--   1 root root    239016 Oct 29 23:06 ./source/x/x11/src/lib/libXdmcp-1.1.0.tar.xz
--rw-r--r--   1 root root    212200 Oct 31 16:46 ./source/x/x11/src/lib/libXevie-1.0.3.tar.xz
--rw-r--r--   1 root root    280120 Oct 28 06:10 ./source/x/x11/src/lib/libXext-1.2.0.tar.xz
--rw-r--r--   1 root root    214808 Mar  8 16:35 ./source/x/x11/src/lib/libXfixes-5.0.tar.xz
--rw-r--r--   1 root root    379392 Oct 29 03:50 ./source/x/x11/src/lib/libXfont-1.4.3.tar.xz
--rw-r--r--   1 root root    189140 Oct 13  2009 ./source/x/x11/src/lib/libXfontcache-1.0.5.tar.xz
--rw-r--r--   1 root root    252040 Oct 29 23:23 ./source/x/x11/src/lib/libXft-2.2.0.tar.xz
--rw-r--r--   1 root root    353096 Mar 18 23:34 ./source/x/x11/src/lib/libXi-1.4.2.tar.xz
--rw-r--r--   1 root root    214976 Oct 28 06:30 ./source/x/x11/src/lib/libXinerama-1.1.1.tar.xz
--rw-r--r--   1 root root    296064 Oct 30 00:19 ./source/x/x11/src/lib/libXmu-1.1.0.tar.xz
--rw-r--r--   1 root root    247092 Jan 14 06:11 ./source/x/x11/src/lib/libXp-1.0.1.tar.xz
--rw-r--r--   1 root root    337460 Oct 30 00:33 ./source/x/x11/src/lib/libXpm-3.5.9.tar.xz
--rw-r--r--   1 root root    231960 Oct 28 19:38 ./source/x/x11/src/lib/libXrandr-1.3.1.tar.xz
--rw-r--r--   1 root root    223896 Jun  9  2010 ./source/x/x11/src/lib/libXrender-0.9.6.tar.xz
--rw-r--r--   1 root root    214312 Oct 28 23:52 ./source/x/x11/src/lib/libXres-1.0.5.tar.xz
--rw-r--r--   1 root root    590864 Mar 10 12:09 ./source/x/x11/src/lib/libXt-1.1.1.tar.xz
--rw-r--r--   1 root root    238284 Oct 30 00:45 ./source/x/x11/src/lib/libXtst-1.2.0.tar.xz
--rw-r--r--   1 root root    229500 Oct 30 00:55 ./source/x/x11/src/lib/libXv-1.0.6.tar.xz
--rw-r--r--   1 root root    222960 Aug 14  2010 ./source/x/x11/src/lib/libXvMC-1.0.6.tar.xz
--rw-r--r--   1 root root    223740 Oct 30 01:01 ./source/x/x11/src/lib/libXxf86dga-1.1.2.tar.xz
--rw-r--r--   1 root root    212836 Nov 21 21:49 ./source/x/x11/src/lib/libXxf86misc-1.0.3.tar.xz
--rw-r--r--   1 root root    219016 Oct 30 01:05 ./source/x/x11/src/lib/libXxf86vm-1.1.1.tar.xz
--rw-r--r--   1 root root    221120 Oct 29 02:40 ./source/x/x11/src/lib/libdmx-1.1.1.tar.xz
--rw-r--r--   1 root root    223944 Oct 21  2010 ./source/x/x11/src/lib/libfontenc-1.1.0.tar.xz
--rw-r--r--   1 root root    271432 Feb  3 04:52 ./source/x/x11/src/lib/libpciaccess-0.12.1.tar.xz
--rw-r--r--   1 root root    263052 Oct 30 01:17 ./source/x/x11/src/lib/libxkbfile-1.0.7.tar.xz
--rw-r--r--   1 root root    364492 Jan 19 13:34 ./source/x/x11/src/lib/pixman-0.20.2.tar.xz
--rw-r--r--   1 root root    146688 Nov  9 00:38 ./source/x/x11/src/lib/xtrans-1.2.6.tar.xz
-drwxr-xr-x   2 root root      4096 Mar 27 07:41 ./source/x/x11/src/proto
--rw-r--r--   1 root root     94368 Oct 30 03:22 ./source/x/x11/src/proto/bigreqsproto-1.1.1.tar.xz
--rw-r--r--   1 root root     94356 Oct 30 03:29 ./source/x/x11/src/proto/compositeproto-0.4.2.tar.xz
--rw-r--r--   1 root root     91724 Oct 30 03:37 ./source/x/x11/src/proto/damageproto-1.2.1.tar.xz
--rw-r--r--   1 root root     89776 Jan  6 01:39 ./source/x/x11/src/proto/dmxproto-2.3.1.tar.xz
--rw-r--r--   1 root root     89040 Feb 16  2010 ./source/x/x11/src/proto/dri2proto-2.3.tar.xz
--rw-r--r--   1 root root     88412 Jan  6 02:06 ./source/x/x11/src/proto/evieext-1.1.1.tar.xz
--rw-r--r--   1 root root     93728 Mar  8 16:19 ./source/x/x11/src/proto/fixesproto-5.0.tar.xz
--rw-r--r--   1 root root     78004 Oct 13  2009 ./source/x/x11/src/proto/fontcacheproto-0.1.3.tar.xz
--rw-r--r--   1 root root    121468 Oct 30 04:32 ./source/x/x11/src/proto/fontsproto-2.1.1.tar.xz
--rw-r--r--   1 root root     98288 Aug 10  2010 ./source/x/x11/src/proto/glproto-1.4.12.tar.xz
--rw-r--r--   1 root root    145316 Nov 11 04:15 ./source/x/x11/src/proto/inputproto-2.0.1.tar.xz
--rw-r--r--   1 root root    103816 Aug 10  2010 ./source/x/x11/src/proto/kbproto-1.0.5.tar.xz
--rw-r--r--   1 root root    191432 Jan  6 02:33 ./source/x/x11/src/proto/printproto-1.0.5.tar.xz
--rw-r--r--   1 root root    114768 Oct 30 06:13 ./source/x/x11/src/proto/randrproto-1.3.2.tar.xz
--rw-r--r--   1 root root    103576 Oct 30 06:21 ./source/x/x11/src/proto/recordproto-1.14.1.tar.xz
--rw-r--r--   1 root root     97920 Aug 10  2010 ./source/x/x11/src/proto/renderproto-0.11.1.tar.xz
--rw-r--r--   1 root root     88480 Dec  9 06:21 ./source/x/x11/src/proto/resourceproto-1.1.1.tar.xz
--rw-r--r--   1 root root     99792 Oct 30 06:28 ./source/x/x11/src/proto/scrnsaverproto-1.2.1.tar.xz
--rw-r--r--   1 root root     92500 Aug 10  2010 ./source/x/x11/src/proto/videoproto-2.3.1.tar.xz
--rw-r--r--   1 root root     93876 Oct 30 07:05 ./source/x/x11/src/proto/xcmiscproto-1.2.1.tar.xz
--rw-r--r--   1 root root    194588 Feb 27 08:03 ./source/x/x11/src/proto/xextproto-7.2.0.tar.xz
--rw-r--r--   1 root root     45976 Oct 13  2009 ./source/x/x11/src/proto/xf86bigfontproto-1.2.0.tar.xz
--rw-r--r--   1 root root     79572 Oct 13  2009 ./source/x/x11/src/proto/xf86dgaproto-2.1.tar.xz
--rw-r--r--   1 root root     89840 Jan  6 03:57 ./source/x/x11/src/proto/xf86driproto-2.1.1.tar.xz
--rw-r--r--   1 root root     78424 Oct 13  2009 ./source/x/x11/src/proto/xf86miscproto-0.9.3.tar.xz
--rw-r--r--   1 root root     90148 Jan  6 04:06 ./source/x/x11/src/proto/xf86vidmodeproto-2.3.1.tar.xz
--rw-r--r--   1 root root     89352 Jan  6 04:21 ./source/x/x11/src/proto/xineramaproto-1.2.1.tar.xz
--rw-r--r--   1 root root    248024 Mar 23 01:57 ./source/x/x11/src/proto/xproto-7.0.21.tar.xz
-drwxr-xr-x   2 root root      4096 Apr  6 04:45 ./source/x/x11/src/util
--rw-r--r--   1 root root     65616 May 19  2006 ./source/x/x11/src/util/gccmakedep-1.0.2.tar.xz
--rw-r--r--   1 root root    131032 Oct 31 02:11 ./source/x/x11/src/util/imake-1.0.4.tar.xz
--rw-r--r--   1 root root     98748 Aug 14  2010 ./source/x/x11/src/util/lndir-1.0.2.tar.xz
--rw-r--r--   1 root root    114524 Oct 30 05:47 ./source/x/x11/src/util/makedepend-1.0.3.tar.xz
--rw-r--r--   1 root root     64800 Mar 15 00:42 ./source/x/x11/src/util/util-macros-1.13.0.tar.xz
--rw-r--r--   1 root root    315680 Jan  6 04:37 ./source/x/x11/src/util/xorg-cf-files-1.0.4.tar.xz
-drwxr-xr-x   2 root root      4096 Aug 14  2010 ./source/x/x11/src/xcb
--rw-r--r--   1 root root    185164 Oct 14  2009 ./source/x/x11/src/xcb/libpthread-stubs-0.3.tar.xz
--rw-r--r--   1 root root    284816 Aug 13  2010 ./source/x/x11/src/xcb/libxcb-1.7.tar.xz
--rw-r--r--   1 root root     90692 Dec  2  2009 ./source/x/x11/src/xcb/xcb-proto-1.6.tar.xz
--rw-r--r--   1 root root    238932 Aug 24  2009 ./source/x/x11/src/xcb/xcb-util-0.3.6.tar.xz
--rw-r--r--   1 root root    251920 Dec 17  2009 ./source/x/x11/src/xcb/xpyb-1.2.tar.xz
-drwxr-xr-x   2 root root      4096 Mar 18 03:41 ./source/x/x11/src/xserver
--rw-r--r--   1 root root   4185452 Mar 17 21:49 ./source/x/x11/src/xserver/xorg-server-1.9.5.tar.xz
--rwxr-xr-x   1 root root     12129 Feb 22  2010 ./source/x/x11/x11.SlackBuild
-drwxr-xr-x   2 root root      4096 Apr 15 19:37 ./source/x/xaw3d
--rwxr-xr-x   1 root root       219 Apr 15 19:25 ./source/x/xaw3d/pull-xaw3d.sh
--rw-r--r--   1 root root       975 Mar 23  2002 ./source/x/xaw3d/slack-desc
--rw-r--r--   1 root root    211040 Apr 15 19:26 ./source/x/xaw3d/xaw3d-20110415git.tar.xz
--rwxr-xr-x   1 root root      2958 Apr 15 19:44 ./source/x/xaw3d/xaw3d.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb  1 06:54 ./source/x/xdg-user-dirs
--rw-r--r--   1 root root       281 Dec 15 02:17 ./source/x/xdg-user-dirs/doinst.sh.gz
--rw-r--r--   1 root root       940 Feb  1 06:53 ./source/x/xdg-user-dirs/slack-desc
--rw-r--r--   1 root root    167200 Sep 13  2010 ./source/x/xdg-user-dirs/xdg-user-dirs-0.13.tar.xz
--rwxr-xr-x   1 root root      2954 Feb  1 06:55 ./source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild
-drwxr-xr-x   2 root root      4096 Jan 20 23:46 ./source/x/xdg-utils
--rw-r--r--   1 root root      1432 Jan 20 23:46 ./source/x/xdg-utils/doinst.sh.gz
--rw-r--r--   1 root root      1010 Aug  1  2008 ./source/x/xdg-utils/slack-desc
--rw-r--r--   1 root root    277034 Jan  1 10:13 ./source/x/xdg-utils/xdg-utils-1.1.0-rc1.tar.bz2
--rwxr-xr-x   1 root root       327 Feb  2  2009 ./source/x/xdg-utils/xdg-utils-cvs_checkout.sh
--rwxr-xr-x   1 root root      2656 Jan 22 04:11 ./source/x/xdg-utils/xdg-utils.SlackBuild
--rw-r--r--   1 root root       121 Jul 12  2008 ./source/x/xdg-utils/xdg-utils.info
-drwxr-xr-x   2 root root      4096 Feb 24 17:55 ./source/x/xterm
--rw-r--r--   1 root root       764 Feb 11  2007 ./source/x/xterm/slack-desc
--rw-r--r--   1 root root    658200 Nov 22 01:42 ./source/x/xterm/xterm-267.tar.xz
--rwxr-xr-x   1 root root      3775 Feb 22  2010 ./source/x/xterm/xterm.SlackBuild
-drwxr-xr-x  49 root root      4096 Apr  5 00:43 ./source/xap
-drwxr-xr-x   2 root root      4096 Dec 18 18:10 ./source/xap/MPlayer
--rw-r--r--   1 root root    222567 Dec 23  2006 ./source/xap/MPlayer/Blue-1.7.tar.bz2
--rwxr-xr--   1 root root     15388 Dec 18 18:39 ./source/xap/MPlayer/MPlayer.SlackBuild
--rw-r--r--   1 root root   8592820 Dec 18 18:10 ./source/xap/MPlayer/MPlayer_nolibdvdcss-20101218.tar.xz
--rw-r--r--   1 root root       937 May 15  2009 ./source/xap/MPlayer/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 11 20:50 ./source/xap/audacious
-drwxr-xr-x   2 root root      4096 Mar 11 21:03 ./source/xap/audacious-plugins
--rw-r--r--   1 root root   2150032 Feb 22 17:29 ./source/xap/audacious-plugins/audacious-plugins-2.4.4.tar.xz
--rwxr-xr-x   1 root root      3912 Mar 11 21:04 ./source/xap/audacious-plugins/audacious-plugins.SlackBuild
--rw-r--r--   1 root root       629 Mar 11 21:03 ./source/xap/audacious-plugins/audacious-plugins.alsa.noise.is.not.helpful.diff.gz
--rw-r--r--   1 root root       892 Mar  8  2007 ./source/xap/audacious-plugins/slack-desc
--rw-r--r--   1 root root    796344 Feb 22 17:29 ./source/xap/audacious/audacious-2.4.4.tar.xz
--rwxr-xr-x   1 root root      4141 Sep 10  2010 ./source/xap/audacious/audacious.SlackBuild
--rw-r--r--   1 root root       121 Apr  9  2010 ./source/xap/audacious/doinst.sh.gz
--rw-r--r--   1 root root      1075 Mar  8  2007 ./source/xap/audacious/slack-desc
-drwxr-xr-x   2 root root      4096 Dec 21 04:04 ./source/xap/blackbox
--rw-r--r--   1 root root    176564 Sep  3  2009 ./source/xap/blackbox/bbkeys-0.9.1.tar.xz
--rw-r--r--   1 root root       964 Sep  3  2009 ./source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch.gz
--rw-r--r--   1 root root    409496 Sep  3  2009 ./source/xap/blackbox/blackbox-0.70.1.tar.xz
--rwxr-xr-x   1 root root      6288 Feb 28 03:34 ./source/xap/blackbox/blackbox.SlackBuild
--rw-r--r--   1 root root       900 May  5  2002 ./source/xap/blackbox/slack-desc
--rw-r--r--   1 root root       339 Dec 21 04:04 ./source/xap/blackbox/xinitrc.blackbox.gz
-drwxr-xr-x   2 root root      4096 Mar  7 19:31 ./source/xap/blueman
--rw-r--r--   1 root root      3648 Feb  1 00:16 ./source/xap/blueman/blueman-open
--rw-r--r--   1 root root    410120 Mar  7 19:30 ./source/xap/blueman/blueman-r708.tar.xz
--rw-r--r--   1 root root       330 Apr 11  2010 ./source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff.gz
--rwxr-xr-x   1 root root      4314 Feb  1 00:16 ./source/xap/blueman/blueman.SlackBuild
--rw-r--r--   1 root root       361 Oct 31  2009 ./source/xap/blueman/doinst.sh.gz
--rw-r--r--   1 root root       882 May  2  2010 ./source/xap/blueman/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 19  2010 ./source/xap/electricsheep
--rw-r--r--   1 root root      1306 Jan  7  2009 ./source/xap/electricsheep/README.slackware
--rw-r--r--   1 root root   3116176 Mar  6  2009 ./source/xap/electricsheep/electricsheep-20090306.tar.xz
--rwxr-xr--   1 root root      9750 Feb 19  2010 ./source/xap/electricsheep/electricsheep.SlackBuild
--rw-r--r--   1 root root       268 Jul  1  2009 ./source/xap/electricsheep/electricsheep.mplayer.diff.gz
--rw-r--r--   1 root root       524 Jan  7  2009 ./source/xap/electricsheep/electricsheep_gnome-open.patch
--rw-r--r--   1 root root      1116 Dec 15  2008 ./source/xap/electricsheep/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 28 01:16 ./source/xap/fluxbox
--rw-r--r--   1 root root    681756 Feb 27 19:40 ./source/xap/fluxbox/fluxbox-1.3.1.tar.xz
--rwxr-xr-x   1 root root      3510 Feb 28 01:16 ./source/xap/fluxbox/fluxbox.SlackBuild
--rw-r--r--   1 root root       687 Jul 21  2005 ./source/xap/fluxbox/slack-desc
--rw-r--r--   1 root root       339 Dec 21 04:03 ./source/xap/fluxbox/xinitrc.fluxbox.gz
-drwxr-xr-x   2 root root      4096 Dec 21 04:04 ./source/xap/fvwm
--rw-r--r--   1 root root     23007 Feb 18  2007 ./source/xap/fvwm/ancient-icons.tar.gz
--rw-r--r--   1 root root       279 Apr  5  2004 ./source/xap/fvwm/doinst.sh.gz
--rw-r--r--   1 root root   1426470 Dec  9  2006 ./source/xap/fvwm/fvwm-2.4.20.tar.bz2
--rwxr-xr-x   1 root root      4095 Dec 21 04:06 ./source/xap/fvwm/fvwm.SlackBuild
--rw-r--r--   1 root root       442 Sep 13  1999 ./source/xap/fvwm/fvwm.colormap.diff.gz
--rw-r--r--   1 root root       792 Feb 11  2008 ./source/xap/fvwm/slack-desc
--rw-r--r--   1 root root      7625 Feb 18  2007 ./source/xap/fvwm/system.fvwm2rc.gz
--rw-r--r--   1 root root       344 Dec 21 04:04 ./source/xap/fvwm/xinitrc.fvwm2.gz
-drwxr-xr-x   2 root root      4096 Mar 11  2010 ./source/xap/geeqie
--rw-r--r--   1 root root       163 Mar 11  2010 ./source/xap/geeqie/doinst.sh.gz
--rw-r--r--   1 root root   1078384 Mar 11  2010 ./source/xap/geeqie/geeqie-1.0.tar.xz
--rwxr-xr-x   1 root root      3715 Mar 11 18:50 ./source/xap/geeqie/geeqie.SlackBuild
--rw-r--r--   1 root root       776 Mar 11  2010 ./source/xap/geeqie/slack-desc
-drwxr-xr-x   2 root root      4096 May 23  2009 ./source/xap/gftp
--rw-r--r--   1 root root   1687167 Dec  2  2008 ./source/xap/gftp/gftp-2.0.19.tar.bz2
--rwxr-xr-x   1 root root      2997 May 23  2009 ./source/xap/gftp/gftp.SlackBuild
--rw-r--r--   1 root root       304 Dec  2  2008 ./source/xap/gftp/gftp.desktop.gz
--rw-r--r--   1 root root       899 Feb 11  2008 ./source/xap/gftp/slack-desc
-drwxr-xr-x   2 root root      4096 Nov  8 02:08 ./source/xap/gimp
--rw-r--r--   1 root root  12409912 Oct  3  2010 ./source/xap/gimp/gimp-2.6.11.tar.xz
--rwxr-xr-x   1 root root      3931 Mar 22 22:05 ./source/xap/gimp/gimp.SlackBuild
--rw-r--r--   1 root root       928 Jan 29  2003 ./source/xap/gimp/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12 19:40 ./source/xap/gkrellm
--rw-r--r--   1 root root    765011 Oct  7  2010 ./source/xap/gkrellm/gkrellm-2.3.5.tar.bz2
--rw-r--r--   1 root root     12374 Feb  1  2004 ./source/xap/gkrellm/gkrellm-countdown-0.1.1.tar.gz
--rwxr-xr-x   1 root root      4597 Feb 12 19:40 ./source/xap/gkrellm/gkrellm.SlackBuild
--rw-r--r--   1 root root       211 Oct 26  2008 ./source/xap/gkrellm/gkrellm.theme.defaults.diff.gz
--rw-r--r--   1 root root       971 Apr 29  2004 ./source/xap/gkrellm/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 22:21 ./source/xap/gnuchess
--rw-r--r--   1 root root    142963 Jan 19  2004 ./source/xap/gnuchess/Sjeng-Free-11.2.tar.bz2
--rw-r--r--   1 root root       652 Oct 27  2004 ./source/xap/gnuchess/chess.png
--rw-r--r--   1 root root    462386 Feb 22  2008 ./source/xap/gnuchess/eboard-1.1.1.tar.bz2
--rw-r--r--   1 root root       458 Feb 20  2010 ./source/xap/gnuchess/eboard.assert.diff.gz
--rw-r--r--   1 root root       224 Oct 27  2004 ./source/xap/gnuchess/eboard.desktop
--rw-r--r--   1 root root    210780 Jan 25 19:12 ./source/xap/gnuchess/gnuchess-5.08.tar.xz
--rwxr-xr-x   1 root root      5629 Mar 21 22:24 ./source/xap/gnuchess/gnuchess.SlackBuild
--rw-r--r--   1 root root       796 Oct 27  2004 ./source/xap/gnuchess/slack-desc
--rw-r--r--   1 root root   1586180 Feb 21 00:54 ./source/xap/gnuchess/xboard-4.5.1.tar.xz
--rw-r--r--   1 root root       238 Mar 21 22:22 ./source/xap/gnuchess/xboard.desktop
-drwxr-xr-x   2 root root      4096 Mar 18 04:37 ./source/xap/gnuplot
--rw-r--r--   1 root root   2226152 Mar  5 03:29 ./source/xap/gnuplot/gnuplot-4.4.3.tar.xz
--rwxr-xr-x   1 root root      4128 Sep  9  2010 ./source/xap/gnuplot/gnuplot.SlackBuild
--rw-r--r--   1 root root      1105 Mar 16  2002 ./source/xap/gnuplot/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 19 22:34 ./source/xap/gucharmap
--rw-r--r--   1 root root       121 Mar 23  2009 ./source/xap/gucharmap/doinst.sh.gz
--rw-r--r--   1 root root   2658784 Dec 23 14:26 ./source/xap/gucharmap/gucharmap-2.33.2.tar.xz
--rwxr-xr-x   1 root root      3480 Mar 19 22:37 ./source/xap/gucharmap/gucharmap.SlackBuild
--rw-r--r--   1 root root       669 Oct 13  2004 ./source/xap/gucharmap/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 14 17:16 ./source/xap/gv
--rw-r--r--   1 root root    502216 Jun 10  2010 ./source/xap/gv/gv-3.7.1.tar.xz
--rwxr-xr-x   1 root root      3907 Apr 14 17:17 ./source/xap/gv/gv.SlackBuild
--rw-r--r--   1 root root       265 Apr 14 17:13 ./source/xap/gv/gv.keysym.diff.gz
--rw-r--r--   1 root root       823 Mar 15  2002 ./source/xap/gv/slack-desc
-drwxr-xr-x   2 root root      4096 Jan 26 19:00 ./source/xap/imagemagick
--rw-r--r--   1 root root   6202504 Jan  1 21:31 ./source/xap/imagemagick/ImageMagick-6.6.6-10.tar.xz
--rwxr-xr-x   1 root root      5125 Jan 26 19:01 ./source/xap/imagemagick/imagemagick.SlackBuild
--rw-r--r--   1 root root      1002 Apr 11  2004 ./source/xap/imagemagick/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 21 18:41 ./source/xap/mozilla-firefox
--rw-r--r--   1 root root  66024327 Mar 18 16:58 ./source/xap/mozilla-firefox/firefox-4.0.source.tar.bz2
--rw-r--r--   1 root root       194 Mar 18 17:40 ./source/xap/mozilla-firefox/firefox-4.0.source.tar.bz2.asc
--rw-r--r--   1 root root       327 Jun 17  2008 ./source/xap/mozilla-firefox/firefox.moz_plugin_path.diff.gz
--rw-r--r--   1 root root     24263 Jun 18  2009 ./source/xap/mozilla-firefox/firefox.png
--rw-r--r--   1 root root       462 Jul  1  2009 ./source/xap/mozilla-firefox/mimeTypes.rdf.gz
--rw-r--r--   1 root root       680 Jul  1  2009 ./source/xap/mozilla-firefox/mozilla-firefox-mimeTypes-fix.diff.gz
--rwxr-xr-x   1 root root      6465 Mar 23 19:54 ./source/xap/mozilla-firefox/mozilla-firefox.SlackBuild
--rw-r--r--   1 root root      2620 Jul  1  2009 ./source/xap/mozilla-firefox/mozilla-firefox.desktop
--rw-r--r--   1 root root       993 Mar  8  2005 ./source/xap/mozilla-firefox/slack-desc
-drwxr-xr-x   2 root root      4096 Mar  6 00:06 ./source/xap/mozilla-thunderbird
--rw-r--r--   1 root root      1586 Dec 12  2009 ./source/xap/mozilla-thunderbird/mimeTypes.rdf.gz
--rwxr-xr-x   1 root root      5932 Mar 23 19:53 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild
--rw-r--r--   1 root root      3378 Mar  8  2005 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.desktop
--rw-r--r--   1 root root      1172 Mar  8  2005 ./source/xap/mozilla-thunderbird/slack-desc
--rw-r--r--   1 root root  68760361 Mar  3 03:47 ./source/xap/mozilla-thunderbird/thunderbird-3.1.9.source.tar.bz2
--rw-r--r--   1 root root       499 Mar  3 10:36 ./source/xap/mozilla-thunderbird/thunderbird-3.1.9.source.tar.bz2.asc
--rw-r--r--   1 root root     47617 Feb 18  2006 ./source/xap/mozilla-thunderbird/thunderbird.png
-drwxr-xr-x   2 root root      4096 Feb 20 19:20 ./source/xap/pan
--rw-r--r--   1 root root   1197720 Feb 19 10:19 ./source/xap/pan/pan-0.134.tar.xz
--rwxr-xr-x   1 root root      3961 Feb 20 19:20 ./source/xap/pan/pan.SlackBuild
--rw-r--r--   1 root root       721 Feb 11  2008 ./source/xap/pan/slack-desc
-drwxr-xr-x   2 root root      4096 Mar 11 18:12 ./source/xap/pidgin
--rw-r--r--   1 root root   7341672 Mar 11 02:52 ./source/xap/pidgin/pidgin-2.7.11.tar.xz
--rw-r--r--   1 root root    604129 May 18  2010 ./source/xap/pidgin/pidgin-encryption-3.1.tar.gz
--rwxr-xr-x   1 root root      6803 Mar 11 18:30 ./source/xap/pidgin/pidgin.SlackBuild
--rw-r--r--   1 root root       321 Dec  7  2008 ./source/xap/pidgin/purple-allow-sign-rsa-md5.patch.gz
--rw-r--r--   1 root root       926 Mar  9  2008 ./source/xap/pidgin/slack-desc
-drwxr-xr-x   2 root root      4096 Apr 21 01:31 ./source/xap/rdesktop
--rw-r--r--   1 root root    243001 May 11  2008 ./source/xap/rdesktop/rdesktop-1.6.0.tar.bz2
--rw-r--r--   1 root root       403 Apr 21 01:29 ./source/xap/rdesktop/rdesktop.CVE-2011-1595.diff.gz
--rwxr-xr-x   1 root root      3416 Apr 21 01:31 ./source/xap/rdesktop/rdesktop.SlackBuild
--rw-r--r--   1 root root       854 Sep 12  2006 ./source/xap/rdesktop/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/xap/rxvt
--rw-r--r--   1 root root    493199 Mar 26  2003 ./source/xap/rxvt/rxvt-2.7.10.tar.bz2
--rwxr-xr-x   1 root root      3012 Jun  9  2009 ./source/xap/rxvt/rxvt.SlackBuild
--rw-r--r--   1 root root      2002 Jun  8  2003 ./source/xap/rxvt/rxvt.utempter.diff.gz
--rw-r--r--   1 root root       880 Mar 10  2002 ./source/xap/rxvt/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 16 15:08 ./source/xap/sane
--rw-r--r--   1 root root       133 Sep 23  2006 ./source/xap/sane/dll.conf.additions.gz
--rw-r--r--   1 root root       285 Feb 12  2008 ./source/xap/sane/doinst.sh.gz
--rw-r--r--   1 root root   4064768 Feb 14 04:07 ./source/xap/sane/sane-backends-1.0.22.tar.bz2
--rw-r--r--   1 root root       341 Jan 20  2010 ./source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff.gz
--rw-r--r--   1 root root    190172 Sep 18  2005 ./source/xap/sane/sane-frontends-1.0.14.tar.bz2
--rwxr-xr-x   1 root root      4647 Mar 18 19:56 ./source/xap/sane/sane.SlackBuild
--rw-r--r--   1 root root       776 Apr  4  2002 ./source/xap/sane/slack-desc
-drwxr-xr-x   3 root root      4096 Apr 11 01:12 ./source/xap/seamonkey
--rw-r--r--   1 root root       231 Jun  1  2007 ./source/xap/seamonkey/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Nov  6  2009 ./source/xap/seamonkey/pkgconfig
--rw-r--r--   1 root root       320 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc
--rw-r--r--   1 root root       305 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-js.pc
--rw-r--r--   1 root root       308 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc
--rw-r--r--   1 root root       302 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-nss.pc
--rw-r--r--   1 root root       276 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc
--rw-r--r--   1 root root       372 Nov  6  2009 ./source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc
--rw-r--r--   1 root root  66878216 Apr  8 11:40 ./source/xap/seamonkey/seamonkey-2.1b3.source.tar.xz
--rw-r--r--   1 root root     12796 Feb  9  2006 ./source/xap/seamonkey/seamonkey-icon.png
--rw-r--r--   1 root root       185 Feb  9  2006 ./source/xap/seamonkey/seamonkey-mail-icon.png
--rw-r--r--   1 root root       207 Feb  9  2006 ./source/xap/seamonkey/seamonkey-mail.desktop
--rwxr-xr-x   1 root root      8367 Apr 11 01:08 ./source/xap/seamonkey/seamonkey.SlackBuild
--rw-r--r--   1 root root       178 Feb  9  2006 ./source/xap/seamonkey/seamonkey.desktop
--rw-r--r--   1 root root       894 Nov 10  2009 ./source/xap/seamonkey/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/xap/seyon
--rw-r--r--   1 root root       713 May  9  1999 ./source/xap/seyon/seyon-2.20c.lsm
--rw-r--r--   1 root root    167487 May  9  1999 ./source/xap/seyon/seyon-2.20c.tar.gz
--rwxr-xr-x   1 root root      3601 May 19  2009 ./source/xap/seyon/seyon.SlackBuild
--rw-r--r--   1 root root     36723 Jan  3  2005 ./source/xap/seyon/seyon_2.20c-16.diff.gz
--rw-r--r--   1 root root      1065 Mar 24  2002 ./source/xap/seyon/slack-desc
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/xap/thunar-volman
--rw-r--r--   1 root root       946 Feb 26  2009 ./source/xap/thunar-volman/slack-desc
--rw-r--r--   1 root root    353504 Sep 14  2008 ./source/xap/thunar-volman/thunar-volman-0.3.80.tar.bz2
--rwxr-xr-x   1 root root      2594 May 19  2009 ./source/xap/thunar-volman/thunar-volman.SlackBuild
-lrwxrwxrwx   1 root root         9 Aug 23  2009 ./source/xap/vim-gvim -> ../ap/vim
-drwxr-xr-x   2 root root      4096 Dec 21 04:05 ./source/xap/windowmaker
--rw-r--r--   1 root root   2078830 Jul 30  2008 ./source/xap/windowmaker/WindowMaker-20060427cvs.tar.bz2
--rw-r--r--   1 root root    238018 Apr  1  1999 ./source/xap/windowmaker/WindowMaker-extra-0.1.tar.gz
--rw-r--r--   1 root root       917 Oct 28  2004 ./source/xap/windowmaker/slack-desc
--rwxr-xr-x   1 root root      4664 Dec 21 04:05 ./source/xap/windowmaker/windowmaker.SlackBuild
--rw-r--r--   1 root root       390 Jul 30  2008 ./source/xap/windowmaker/windowmaker.no-mmx.diff.gz
--rw-r--r--   1 root root       214 Feb 11  2010 ./source/xap/windowmaker/windowmaker.png.1.4.0.diff.gz
--rw-r--r--   1 root root       669 May 30  2002 ./source/xap/windowmaker/wmaker.inst.diff.gz
--rw-r--r--   1 root root       445 Dec 21 04:05 ./source/xap/windowmaker/xinitrc.wmaker.gz
-drwxr-xr-x   2 root root      4096 Jan 22 18:19 ./source/xap/x11-ssh-askpass
--rw-r--r--   1 root root       533 Jul 11  2009 ./source/xap/x11-ssh-askpass/README
--rw-r--r--   1 root root       765 Jan 17  2009 ./source/xap/x11-ssh-askpass/slack-desc
--rw-r--r--   1 root root     29229 Jul 20  2009 ./source/xap/x11-ssh-askpass/x11-ssh-askpass-1.2.4.1.tar.gz
--rwxr-xr-x   1 root root      1941 Feb  1 06:39 ./source/xap/x11-ssh-askpass/x11-ssh-askpass.SlackBuild
--rw-r--r--   1 root root       349 Jul 11  2009 ./source/xap/x11-ssh-askpass/x11-ssh-askpass.info
--rw-r--r--   1 root root       261 Mar 29  2008 ./source/xap/x11-ssh-askpass/xprofile.sample
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/xap/x3270
--rw-r--r--   1 root root       391 Apr  2  2007 ./source/xap/x3270/doinst.sh.gz
--rw-r--r--   1 root root       766 Mar 12  2002 ./source/xap/x3270/slack-desc
--rw-r--r--   1 root root    854545 Aug 28  2008 ./source/xap/x3270/x3270-3.3.7p8.tar.bz2
--rwxr-xr-x   1 root root      2936 May 19  2009 ./source/xap/x3270/x3270.SlackBuild
-drwxr-xr-x   2 root root      4096 Oct 16  2010 ./source/xap/xaos
--rw-r--r--   1 root root       875 Oct 16  2010 ./source/xap/xaos/slack-desc
--rw-r--r--   1 root root   1121380 Oct 16  2010 ./source/xap/xaos/xaos-3.5.tar.xz
--rw-r--r--   1 root root      2796 Oct 16  2010 ./source/xap/xaos/xaos.6.gz
--rwxr-xr-x   1 root root      5060 Oct 16  2010 ./source/xap/xaos/xaos.SlackBuild
--rw-r--r--   1 root root       161 May 24  2010 ./source/xap/xaos/xaos.desktop
--rw-r--r--   1 root root     14980 May 24  2010 ./source/xap/xaos/xaos.png
-drwxr-xr-x   2 root root      4096 Jun  6  2010 ./source/xap/xchat
--rw-r--r--   1 root root       620 Feb 11  2008 ./source/xap/xchat/slack-desc
--rw-r--r--   1 root root   1509993 May 30  2010 ./source/xap/xchat/xchat-2.8.8.tar.bz2
--rwxr-xr-x   1 root root      3590 Jan 26 17:42 ./source/xap/xchat/xchat.SlackBuild
-drwxr-xr-x   5 root root      4096 Mar 29 22:03 ./source/xap/xfce
--rw-r--r--   1 root root     26680 Jul 31  2009 ./source/xap/xfce/icons.tar.xz
-drwxr-xr-x   2 root root      4096 Mar 29 21:22 ./source/xap/xfce/patches
--rw-r--r--   1 root root       410 Mar 29 21:18 ./source/xap/xfce/patches/Thunar.thunar-vfs-io-local.diff.gz
--rw-r--r--   1 root root       508 Aug 22  2010 ./source/xap/xfce/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff.gz
--rw-r--r--   1 root root       762 Jul  8  2010 ./source/xap/xfce/patches/mousepad-fix_find.diff.gz
--rw-r--r--   1 root root       644 Jul  8  2010 ./source/xap/xfce/patches/mousepad-fix_find_and_replace.diff.gz
--rw-r--r--   1 root root       580 Feb 23 03:54 ./source/xap/xfce/patches/no_sensitive_panel_during_plugin_moves.patch.gz
--rw-r--r--   1 root root      1842 May 23  2010 ./source/xap/xfce/patches/thunar-1.0.2-fixup_docdir.diff.gz
--rw-r--r--   1 root root       233 Mar  1  2009 ./source/xap/xfce/patches/xfcalendar.desktop.in.diff.gz
--rw-r--r--   1 root root       347 Mar 10 04:56 ./source/xap/xfce/patches/xfce-utils-load_systemwide_Xmodmap.diff.gz
--rw-r--r--   1 root root       301 Jun 18  2010 ./source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff.gz
--rw-r--r--   1 root root       289 Jul 31  2009 ./source/xap/xfce/patches/xfdesktop-fix_education_icon.diff.gz
--rw-r--r--   1 root root       834 Mar  9 14:04 ./source/xap/xfce/patches/xfsm-compat-kde.c-start-kde4-services.diff.gz
-drwxr-xr-x   2 root root      4096 Apr 21  2007 ./source/xap/xfce/profile.d
--rwxr-xr-x   1 root root       162 Jun 29  2007 ./source/xap/xfce/profile.d/xfce.csh
--rwxr-xr-x   1 root root       170 Apr 21  2007 ./source/xap/xfce/profile.d/xfce.sh
--rw-r--r--   1 root root       764 Apr  6  2008 ./source/xap/xfce/slack-desc
-drwxr-xr-x   2 root root      4096 Feb 12 03:29 ./source/xap/xfce/src
--rw-r--r--   1 root root   1368508 Jan 30 16:15 ./source/xap/xfce/src/Terminal-0.4.6.tar.xz
--rw-r--r--   1 root root   3519008 May 21  2010 ./source/xap/xfce/src/Thunar-1.0.2.tar.xz
--rw-r--r--   1 root root   1209728 May 21  2010 ./source/xap/xfce/src/exo-0.3.107.tar.xz
--rw-r--r--   1 root root    228668 Feb 26  2009 ./source/xap/xfce/src/gtk-xfce-engine-2.6.0.tar.xz
--rw-r--r--   1 root root    334512 May 21  2010 ./source/xap/xfce/src/libxfce4menu-4.6.2.tar.xz
--rw-r--r--   1 root root    347928 May 21  2010 ./source/xap/xfce/src/libxfce4util-4.6.2.tar.xz
--rw-r--r--   1 root root    570980 May 21  2010 ./source/xap/xfce/src/libxfcegui4-4.6.4.tar.xz
--rw-r--r--   1 root root    269176 Feb 26  2009 ./source/xap/xfce/src/mousepad-0.2.16.tar.xz
--rw-r--r--   1 root root   1698784 Apr 19  2009 ./source/xap/xfce/src/orage-4.6.1.tar.xz
--rw-r--r--   1 root root    531852 May 21  2010 ./source/xap/xfce/src/xfce-utils-4.6.2.tar.xz
--rw-r--r--   1 root root    284652 May 21  2010 ./source/xap/xfce/src/xfce4-appfinder-4.6.2.tar.xz
--rw-r--r--   1 root root     73924 Jan 16 14:16 ./source/xap/xfce/src/xfce4-dev-tools-4.8.0.tar.xz
--rw-r--r--   1 root root    334516 Apr 19  2009 ./source/xap/xfce/src/xfce4-mixer-4.6.1.tar.xz
--rw-r--r--   1 root root    792944 May 21  2010 ./source/xap/xfce/src/xfce4-panel-4.6.4.tar.xz
--rw-r--r--   1 root root   1262588 May 21  2010 ./source/xap/xfce/src/xfce4-session-4.6.2.tar.xz
--rw-r--r--   1 root root    466224 May 21  2010 ./source/xap/xfce/src/xfce4-settings-4.6.5.tar.xz
--rw-r--r--   1 root root    368260 May 21  2010 ./source/xap/xfce/src/xfconf-4.6.2.tar.xz
--rw-r--r--   1 root root   3215316 May 21  2010 ./source/xap/xfce/src/xfdesktop-4.6.2.tar.xz
--rw-r--r--   1 root root    728660 Apr 19  2009 ./source/xap/xfce/src/xfprint-4.6.1.tar.xz
--rw-r--r--   1 root root   1639812 May 21  2010 ./source/xap/xfce/src/xfwm4-4.6.2.tar.xz
--rw-r--r--   1 root root    372732 Feb 26  2009 ./source/xap/xfce/src/xfwm4-themes-4.6.0.tar.xz
--rwxr-xr-x   1 root root      9648 Mar 29 21:30 ./source/xap/xfce/xfce.SlackBuild
-drwxr-xr-x   2 root root      4096 Feb 12 21:02 ./source/xap/xfce4-notifyd
--rw-r--r--   1 root root       174 Feb 26  2009 ./source/xap/xfce4-notifyd/doinst.sh.gz
--rw-r--r--   1 root root       905 Feb 20  2010 ./source/xap/xfce4-notifyd/slack-desc
--rw-r--r--   1 root root    225913 Feb  2 21:59 ./source/xap/xfce4-notifyd/xfce4-notifyd-0.1.1.tar.bz2
--rwxr-xr-x   1 root root      3234 Feb 12 21:03 ./source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar  2  2010 ./source/xap/xfce4-power-manager
--rw-r--r--   1 root root       172 May 30  2009 ./source/xap/xfce4-power-manager/doinst.sh.gz
--rw-r--r--   1 root root       936 May 30  2009 ./source/xap/xfce4-power-manager/slack-desc
--rw-r--r--   1 root root    920729 Mar  2  2010 ./source/xap/xfce4-power-manager/xfce4-power-manager-0.8.5.tar.bz2
--rwxr-xr-x   1 root root      3674 Mar  2  2010 ./source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild
-drwxr-xr-x   2 root root      4096 May 19  2009 ./source/xap/xfractint
--rw-r--r--   1 root root    103531 Mar 14  2002 ./source/xap/xfractint/palette.maps.tar.gz
--rw-r--r--   1 root root       871 Mar 14  2002 ./source/xap/xfractint/slack-desc
--rw-r--r--   1 root root   1212397 Oct 14  2008 ./source/xap/xfractint/xfractint-20.04p09.tar.bz2
--rwxr-xr-x   1 root root      3446 May 19  2009 ./source/xap/xfractint/xfractint.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 19 22:56 ./source/xap/xgames
--rw-r--r--   1 root root       269 Aug  4  1999 ./source/xap/xgames/maze.diff.gz
--rw-r--r--   1 root root      7945 Oct 22  1994 ./source/xap/xgames/maze.tar.gz
--rw-r--r--   1 root root       696 Mar  1  2007 ./source/xap/xgames/slack-desc
--rw-r--r--   1 root root       871 Feb 22  2007 ./source/xap/xgames/spider.diff.gz
--rw-r--r--   1 root root    130637 Dec  4  1993 ./source/xap/xgames/spider.tar.gz
--rw-r--r--   1 root root       287 Aug  4  1999 ./source/xap/xgames/xcolormap.diff.gz
--rw-r--r--   1 root root      2808 Dec  4  1993 ./source/xap/xgames/xcolormap.tar.gz
--rw-r--r--   1 root root      5937 Dec  4  1993 ./source/xap/xgames/xcuckoo-1.1.tar.gz
--rw-r--r--   1 root root       228 Feb 28  2007 ./source/xap/xgames/xcuckoo.diff.gz
--rwxr-xr-x   1 root root      4981 Mar 20 17:12 ./source/xap/xgames/xgames.SlackBuild
--rw-r--r--   1 root root      1150 Aug 22  2009 ./source/xap/xgames/xlander-2009-07-18.diff.gz
--rw-r--r--   1 root root      2543 Mar  1  2007 ./source/xap/xgames/xlander.fixes.diff.gz
--rw-r--r--   1 root root     15612 Jun 17  1995 ./source/xap/xgames/xlander.tar.gz
--rw-r--r--   1 root root     12791 Oct 25  2008 ./source/xap/xgames/xminesweep3.0.tar.gz
--rw-r--r--   1 root root     22849 Aug  4  1999 ./source/xap/xgames/xneko.tar.gz
--rw-r--r--   1 root root     21694 Dec  2  1993 ./source/xap/xgames/xroach.tar.gz
--rw-r--r--   1 root root     56752 Dec 15  2001 ./source/xap/xgames/xsnow-1.42.tar.gz
-drwxr-xr-x   2 root root      4096 Nov  6 21:02 ./source/xap/xine-lib
--rw-r--r--   1 root root       927 Aug 12  2003 ./source/xap/xine-lib/slack-desc
--rw-r--r--   1 root root   5782580 Jul 25  2010 ./source/xap/xine-lib/xine-lib-1.1.19.tar.xz
--rwxr-xr-x   1 root root      3392 Nov  6 21:02 ./source/xap/xine-lib/xine-lib.SlackBuild
--rw-r--r--   1 root root       329 Nov  6 21:02 ./source/xap/xine-lib/xine-lib.XvMClib.h.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 19  2010 ./source/xap/xine-ui
--rw-r--r--   1 root root       832 Aug 12  2003 ./source/xap/xine-ui/slack-desc
--rw-r--r--   1 root root   2138011 May  3  2007 ./source/xap/xine-ui/xine-ui-0.99.5.tar.bz2
--rwxr-xr-x   1 root root      3139 Feb 25  2010 ./source/xap/xine-ui/xine-ui.SlackBuild
--rw-r--r--   1 root root       269 Feb 19  2010 ./source/xap/xine-ui/xine-ui.png14.diff.gz
--rw-r--r--   1 root root       258 May  4  2007 ./source/xap/xine-ui/xine.desktop.gz
-drwxr-xr-x   2 root root      4096 Mar 15 22:22 ./source/xap/xlockmore
--rw-r--r--   1 root root       225 Feb 23  2002 ./source/xap/xlockmore/l-bob.README
--rw-r--r--   1 root root     27870 Apr  1  1998 ./source/xap/xlockmore/l-bob.xbm
--rw-r--r--   1 root root     15190 Apr  1  1998 ./source/xap/xlockmore/l-linux.xbm
--rw-r--r--   1 root root      7025 Feb 23  2002 ./source/xap/xlockmore/s-bob.xbm
--rw-r--r--   1 root root       922 Mar 24  2002 ./source/xap/xlockmore/slack-desc
--rw-r--r--   1 root root   1987212 Dec 12 20:21 ./source/xap/xlockmore/xlockmore-5.32.tar.bz2
--rw-r--r--   1 root root       194 Dec 12 20:21 ./source/xap/xlockmore/xlockmore-5.32.tar.bz2.asc
--rwxr-xr-x   1 root root      3907 Mar 15 22:33 ./source/xap/xlockmore/xlockmore.SlackBuild
--rw-r--r--   1 root root       371 May 30  2002 ./source/xap/xlockmore/xlockmore.bitmap.diff.gz
-drwxr-xr-x   2 root root      4096 Mar 22  2010 ./source/xap/xmms
--rw-r--r--   1 root root       834 Feb 24  2004 ./source/xap/xmms/slack-desc
--rw-r--r--   1 root root   2581032 Nov 16  2007 ./source/xap/xmms/xmms-1.2.11.tar.bz2
--rwxr-xr-x   1 root root      3385 Mar 22  2010 ./source/xap/xmms/xmms.SlackBuild
--rw-r--r--   1 root root       525 Sep 11  2008 ./source/xap/xmms/xmms.desktop
--rw-r--r--   1 root root       279 Sep 12  2008 ./source/xap/xmms/xmms.gtk.doublesize.diff.gz
--rw-r--r--   1 root root      2475 Jan  4  2008 ./source/xap/xmms/xmms.png
--rw-r--r--   1 root root       260 Jun  9  2009 ./source/xap/xmms/xmms.wmxmms_vis_depth_workaround.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 20  2010 ./source/xap/xpaint
--rw-r--r--   1 root root       902 Mar 12  2002 ./source/xap/xpaint/slack-desc
--rw-r--r--   1 root root    795772 Feb 12  2010 ./source/xap/xpaint/xpaint-2.8.16.tar.bz2
--rwxr-xr-x   1 root root      4009 Feb 20  2010 ./source/xap/xpaint/xpaint.SlackBuild
-drwxr-xr-x   4 root root      4096 Feb 11  2010 ./source/xap/xpdf
--rw-r--r--   1 root root       325 Jan 11  2010 ./source/xap/xpdf/doinst.sh.gz
-drwxr-xr-x   2 root root      4096 Jan 11  2010 ./source/xap/xpdf/lang
--rw-r--r--   1 root root       207 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-arabic.diff.gz
--rw-r--r--   1 root root      1058 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-arabic.tar.gz
--rw-r--r--   1 root root       375 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-chinese-simplified.diff.gz
--rw-r--r--   1 root root    835960 Jul 27  2004 ./source/xap/xpdf/lang/xpdf-chinese-simplified.tar.gz
--rw-r--r--   1 root root       354 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-chinese-traditional.diff.gz
--rw-r--r--   1 root root    794604 Jul 27  2004 ./source/xap/xpdf/lang/xpdf-chinese-traditional.tar.gz
--rw-r--r--   1 root root       242 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-cyrillic.diff.gz
--rw-r--r--   1 root root      1660 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-cyrillic.tar.gz
--rw-r--r--   1 root root       236 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-greek.diff.gz
--rw-r--r--   1 root root      1263 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-greek.tar.gz
--rw-r--r--   1 root root       224 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-hebrew.diff.gz
--rw-r--r--   1 root root      1314 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-hebrew.tar.gz
--rw-r--r--   1 root root       750 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-japanese.diff.gz
--rw-r--r--   1 root root    494803 Jul 27  2004 ./source/xap/xpdf/lang/xpdf-japanese.tar.gz
--rw-r--r--   1 root root       312 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-korean.diff.gz
--rw-r--r--   1 root root    470455 Jul  7  2005 ./source/xap/xpdf/lang/xpdf-korean.tar.gz
--rw-r--r--   1 root root       200 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-latin2.diff.gz
--rw-r--r--   1 root root      1435 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-latin2.tar.gz
--rw-r--r--   1 root root       231 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-thai.diff.gz
--rw-r--r--   1 root root      1873 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-thai.tar.gz
--rw-r--r--   1 root root       210 Mar  2  2008 ./source/xap/xpdf/lang/xpdf-turkish.diff.gz
--rw-r--r--   1 root root      1140 Jul 18  2004 ./source/xap/xpdf/lang/xpdf-turkish.tar.gz
-drwxr-xr-x   2 root root      4096 Mar 29 18:28 ./source/xap/xpdf/patches
--rw-r--r--   1 root root      1050 Jul 30  2007 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch
--rw-r--r--   1 root root       189 Jul 30  2007 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch.sig
--rw-r--r--   1 root root     20843 Nov  7  2007 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch
--rw-r--r--   1 root root       189 Nov  7  2007 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch.sig
--rw-r--r--   1 root root     30727 Apr 16  2009 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch
--rw-r--r--   1 root root       197 Apr 16  2009 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch.sig
--rw-r--r--   1 root root      6982 Oct 14  2009 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch
--rw-r--r--   1 root root       197 Oct 14  2009 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch.sig
--rw-r--r--   1 root root      1065 Oct 21  2010 ./source/xap/xpdf/patches/xpdf-3.02pl5.patch
--rw-r--r--   1 root root       197 Oct 21  2010 ./source/xap/xpdf/patches/xpdf-3.02pl5.patch.sig
--rw-r--r--   1 root root        60 Mar 29 18:23 ./source/xap/xpdf/patches/xpdf-3.02pl6.patch
--rw-r--r--   1 root root       305 Mar 29 18:28 ./source/xap/xpdf/patches/xpdf-3.02pl6.patch.sig
--rw-r--r--   1 root root       498 Apr 12  2007 ./source/xap/xpdf/patches/xpdf-resizefix.diff.gz
--rw-r--r--   1 root root     37396 Nov 12  2007 ./source/xap/xpdf/patches/xpdf_3.02-1.3.diff.gz
--rw-r--r--   1 root root       636 Feb 18  2007 ./source/xap/xpdf/patches/xpdfrc.diff.gz
--rw-r--r--   1 root root       643 Mar 31 02:49 ./source/xap/xpdf/slack-desc
--rw-r--r--   1 root root    674912 Feb 27  2007 ./source/xap/xpdf/xpdf-3.02.tar.gz
--rw-r--r--   1 root root       189 Feb 27  2007 ./source/xap/xpdf/xpdf-3.02.tar.gz.sig
--rwxr-xr-x   1 root root      5256 Mar 31 19:24 ./source/xap/xpdf/xpdf.SlackBuild
--rw-r--r--   1 root root      3260 Jan 11  2010 ./source/xap/xpdf/xpdf.desktop
-drwxr-xr-x   2 root root      4096 Feb 28 03:41 ./source/xap/xsane
--rw-r--r--   1 root root       955 May 11  2004 ./source/xap/xsane/slack-desc
--rw-r--r--   1 root root   1874276 Nov 16 22:05 ./source/xap/xsane/xsane-0.998.tar.xz
--rwxr-xr-x   1 root root      3140 Feb 28 03:41 ./source/xap/xsane/xsane.SlackBuild
-drwxr-xr-x   2 root root      4096 Mar 15 22:05 ./source/xap/xscreensaver
--rw-r--r--   1 root root      2868 Oct 17  2008 ./source/xap/xscreensaver/setuid.c.gz
--rw-r--r--   1 root root       887 Oct 17  2008 ./source/xap/xscreensaver/slack-desc
--rw-r--r--   1 root root   3350612 Sep 15  2010 ./source/xap/xscreensaver/xscreensaver-5.12.tar.xz
--rwxr-xr-x   1 root root      3584 Mar 15 22:37 ./source/xap/xscreensaver/xscreensaver.SlackBuild
--rw-r--r--   1 root root       285 May 15  2009 ./source/xap/xscreensaver/xscreensaver.electricsheep.diff.gz
--rw-r--r--   1 root root      1763 Oct 17  2008 ./source/xap/xscreensaver/xscreensaver.setuid.diff.gz
-drwxr-xr-x   2 root root      4096 Feb 19  2010 ./source/xap/xv
--rw-r--r--   1 root root       688 Mar 10  2002 ./source/xap/xv/slack-desc
--rw-r--r--   1 root root   1693808 Dec 22  1994 ./source/xap/xv/xv-3.10.tar.xz
--rw-r--r--   1 root root      3294 Dec 16  2008 ./source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff.bz2
--rw-r--r--   1 root root     25974 May 21  2007 ./source/xap/xv/xv-3.10a-jumbo-README.txt
--rw-r--r--   1 root root    114978 Feb 19  2010 ./source/xap/xv/xv-3.10a-jumbo-additions.diff.bz2
--rw-r--r--   1 root root    287250 May 21  2007 ./source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2
--rw-r--r--   1 root root     21943 Oct  5  1996 ./source/xap/xv/xv-3.10a.patch.gz
--rwxr-xr-x   1 root root      3210 Feb 19  2010 ./source/xap/xv/xv.SlackBuild
--rw-r--r--   1 root root       229 Feb 19  2010 ./source/xap/xv/xv.jasper.diff.gz
--rw-r--r--   1 root root       317 Feb 19  2010 ./source/xap/xv/xv.prefix.diff.gz
--rw-r--r--   1 root root       282 Feb 19  2010 ./source/xap/xv/xv.prefix_x86_64.diff.gz
-drwxr-xr-x   2 root root      4096 Apr  3 10:43 ./source/xap/xxgdb
--rw-r--r--   1 root root       874 Mar 13  2002 ./source/xap/xxgdb/slack-desc
--rw-r--r--   1 root root       236 Apr  3 09:58 ./source/xap/xxgdb/xxgdb-1.08-glibc.patch.xz
--rw-r--r--   1 root root       212 Apr  3 09:58 ./source/xap/xxgdb/xxgdb-1.12-debian-filemenu.patch.xz
--rw-r--r--   1 root root       768 Apr  3 09:58 ./source/xap/xxgdb/xxgdb-1.12-debian-pty.patch.xz
--rw-r--r--   1 root root      7024 Apr  3 09:58 ./source/xap/xxgdb/xxgdb-1.12-mandriva.patch.xz
--rw-r--r--   1 root root       376 Apr  3 09:58 ./source/xap/xxgdb/xxgdb-1.12-sysv.patch.xz
--rw-r--r--   1 root root     88596 Nov 19  1995 ./source/xap/xxgdb/xxgdb-1.12.tar.xz
--rwxr-xr-x   1 root root      3446 Apr  5 00:44 ./source/xap/xxgdb/xxgdb.SlackBuild
-drwxr-xr-x   3 root root      4096 May 12  2010 ./source/y
-drwxr-xr-x   2 root root      4096 May 11  2010 ./source/y/bsd-games
--rw-r--r--   1 root root       825 Aug 30  2001 ./source/y/bsd-games/bsd-games-2.13.lsm
--rw-r--r--   1 root root   1861269 Aug 30  2001 ./source/y/bsd-games/bsd-games-2.13.tar.bz2
--rw-r--r--   1 root root       164 Sep 27  1999 ./source/y/bsd-games/bsd-games-login-fortune.csh
--rw-r--r--   1 root root       164 May 11  2010 ./source/y/bsd-games/bsd-games-login-fortune.sh
--rwxr-xr-x   1 root root      6785 May 15  2010 ./source/y/bsd-games/bsd-games.SlackBuild
--rw-r--r--   1 root root       563 Feb  3  2003 ./source/y/bsd-games/bsd-games.config.params.diff.gz
--rw-r--r--   1 root root       283 Feb  3  2003 ./source/y/bsd-games/bsd-games.fortlen.diff.gz
--rw-r--r--   1 root root       181 Mar 10  2002 ./source/y/bsd-games/bsd-games.fortunepath.diff.gz
--rw-r--r--   1 root root      2333 May 11  2010 ./source/y/bsd-games/bsd-games.getline.diff.gz
--rw-r--r--   1 root root       265 Sep  7  2006 ./source/y/bsd-games/bsd-games.ospeed.diff.gz
--rw-r--r--   1 root root       386 Aug 27  2007 ./source/y/bsd-games/bsd-games.phantasia_install_fix.diff.gz
--rw-r--r--   1 root root      1960 Sep  9  2006 ./source/y/bsd-games/bsd-games.pom.diff.gz
--rw-r--r--   1 root root       353 Feb  3  2003 ./source/y/bsd-games/bsd-games.strfile.8.diff.gz
--rw-r--r--   1 root root       405 Aug 27  2007 ./source/y/bsd-games/bsd-games.trek-gcc4.diff.gz
--rw-r--r--   1 root root     15107 Mar 10  2002 ./source/y/bsd-games/fortunes-linuxcookie.tar.gz
--rw-r--r--   1 root root    364407 Mar 10  2002 ./source/y/bsd-games/fortunes-o.tar.gz
--rw-r--r--   1 root root    104848 Oct 25  1993 ./source/y/bsd-games/hangman-words.gz
--rw-r--r--   1 root root      1056 Mar 10  2002 ./source/y/bsd-games/slack-desc
-drwxr-xr-x   4 root root      4096 Apr 22 19:05 ./testing
--rw-r--r--   1 root root      5053 Apr 22 19:05 ./testing/CHECKSUMS.md5
--rw-r--r--   1 root root       198 Apr 22 19:05 ./testing/CHECKSUMS.md5.asc
--rw-r--r--   1 root root      7115 Apr 22 19:05 ./testing/FILE_LIST
--rw-r--r--   1 root root    364878 Apr 22 19:05 ./testing/MANIFEST.bz2
--rw-r--r--   1 root root      5286 Apr 22 19:05 ./testing/PACKAGES.TXT
-drwxr-xr-x   2 root root      4096 Apr 22 04:53 ./testing/packages
--rw-r--r--   1 root root       344 Apr 22 01:49 ./testing/packages/kernel-firmware-2.6.38.4-noarch-1.txt
--rw-r--r--   1 root root   1025880 Apr 22 01:49 ./testing/packages/kernel-firmware-2.6.38.4-noarch-1.txz
--rw-r--r--   1 root root       198 Apr 22 01:49 ./testing/packages/kernel-firmware-2.6.38.4-noarch-1.txz.asc
--rw-r--r-- 1 root root      626 Apr 22 01:49 ./testing/packages/kernel-generic-2.6.38.4-x86_64-1.txt
--rw-r--r-- 1 root root  3255200 Apr 22 01:49 ./testing/packages/kernel-generic-2.6.38.4-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr 22 01:49 ./testing/packages/kernel-generic-2.6.38.4-x86_64-1.txz.asc
--rw-r--r-- 1 root root      332 Apr 22 01:45 ./testing/packages/kernel-headers-2.6.38.4-x86-1.txt
--rw-r--r-- 1 root root   563168 Apr 22 01:45 ./testing/packages/kernel-headers-2.6.38.4-x86-1.txz
--rw-r--r-- 1 root root      198 Apr 22 01:45 ./testing/packages/kernel-headers-2.6.38.4-x86-1.txz.asc
--rw-r--r-- 1 root root      638 Apr 22 04:04 ./testing/packages/kernel-huge-2.6.38.4-x86_64-1.txt
--rw-r--r-- 1 root root  6302200 Apr 22 04:04 ./testing/packages/kernel-huge-2.6.38.4-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr 22 04:04 ./testing/packages/kernel-huge-2.6.38.4-x86_64-1.txz.asc
--rw-r--r-- 1 root root      520 Apr 22 03:56 ./testing/packages/kernel-modules-2.6.38.4-x86_64-1.txt
--rw-r--r-- 1 root root 20856840 Apr 22 03:56 ./testing/packages/kernel-modules-2.6.38.4-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr 22 03:56 ./testing/packages/kernel-modules-2.6.38.4-x86_64-1.txz.asc
--rw-r--r-- 1 root root      317 Apr 22 01:45 ./testing/packages/kernel-source-2.6.38.4-noarch-1.txt
--rw-r--r-- 1 root root 65458468 Apr 22 01:45 ./testing/packages/kernel-source-2.6.38.4-noarch-1.txz
--rw-r--r-- 1 root root      198 Apr 22 01:45 ./testing/packages/kernel-source-2.6.38.4-noarch-1.txz.asc
--rw-r--r-- 1 root root      260 Apr 17 20:54 ./testing/packages/libdrm-2.4.25-x86_64-1.txt
--rw-r--r-- 1 root root    99160 Apr 17 20:54 ./testing/packages/libdrm-2.4.25-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr 17 20:54 ./testing/packages/libdrm-2.4.25-x86_64-1.txz.asc
--rw-r--r-- 1 root root      335 Apr  8 18:15 ./testing/packages/mesa-7.10.2-x86_64-1.txt
--rw-r--r-- 1 root root  6419244 Apr  8 18:15 ./testing/packages/mesa-7.10.2-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr  8 18:15 ./testing/packages/mesa-7.10.2-x86_64-1.txz.asc
--rw-r--r-- 1 root root      426 Apr 17 21:22 ./testing/packages/xf86-video-nouveau-git_20110417_8378443-x86_64-1.txt
--rw-r--r-- 1 root root    83116 Apr 17 21:22 ./testing/packages/xf86-video-nouveau-git_20110417_8378443-x86_64-1.txz
--rw-r--r-- 1 root root      198 Apr 17 21:22 ./testing/packages/xf86-video-nouveau-git_20110417_8378443-x86_64-1.txz.asc
-drwxr-xr-x 8 root root     4096 Apr 24 01:24 ./testing/source
-drwxr-xr-x 2 root root     4096 Apr 17 20:54 ./testing/source/libdrm
--rw-r--r-- 1 root root   326944 Apr 11 07:28 ./testing/source/libdrm/libdrm-2.4.25.tar.xz
--rwxr-xr-x 1 root root     3558 Apr 17 20:54 ./testing/source/libdrm/libdrm.SlackBuild
--rw-r--r-- 1 root root      717 Feb  1  2007 ./testing/source/libdrm/slack-desc
-drwxr-xr-x 2 root root     4096 Apr 22 18:23 ./testing/source/linux-2.6.35.12-configs
--rw-r--r-- 1 root root   108781 Apr 22 18:03 ./testing/source/linux-2.6.35.12-configs/config-generic-2.6.35.12
--rw-r--r-- 1 root root   108755 Apr 22 18:03 ./testing/source/linux-2.6.35.12-configs/config-huge-2.6.35.12
-drwxr-xr-x 2 root root     4096 Apr 22 04:11 ./testing/source/linux-2.6.38.4-configs
--rw-r--r-- 1 root root   113940 Apr 22 01:32 ./testing/source/linux-2.6.38.4-configs/config-generic-2.6.38.4
--rw-r--r-- 1 root root   113914 Apr 22 03:56 ./testing/source/linux-2.6.38.4-configs/config-huge-2.6.38.4
-drwxr-xr-x 2 root root     4096 Apr 19 18:15 ./testing/source/linux-2.6.39-rc4-configs
--rw-r--r-- 1 root root   116864 Apr 19 18:15 ./testing/source/linux-2.6.39-rc4-configs/config-generic-2.6.39-rc4
--rw-r--r-- 1 root root   116838 Apr 19 18:14 ./testing/source/linux-2.6.39-rc4-configs/config-huge-2.6.39-rc4
-drwxr-xr-x 3 root root     4096 Apr  8 18:10 ./testing/source/mesa
--rw-r--r-- 1 root root   150188 Apr  6 20:44 ./testing/source/mesa/MesaGLUT-7.10.2.tar.xz
--rw-r--r-- 1 root root  4783896 Apr  6 20:45 ./testing/source/mesa/MesaLib-7.10.2.tar.xz
--rw-r--r-- 1 root root      352 Mar 10  2008 ./testing/source/mesa/README.GIT
--rwxr-xr-x 1 root root      732 Feb  5 21:09 ./testing/source/mesa/get-mesa.sh
--rw-r--r-- 1 root root  7168504 Oct  1  2010 ./testing/source/mesa/mesa-demos-8.0.1.tar.xz
--rwxr-xr-x 1 root root     5461 Apr  8 18:10 ./testing/source/mesa/mesa.SlackBuild
--rw-r--r-- 1 root root       78 Oct  1  2010 ./testing/source/mesa/mesa.url
-drwxr-xr-x 2 root root     4096 Jan 30 23:09 ./testing/source/mesa/patches
--rw-r--r-- 1 root root      579 Oct 29 19:22 ./testing/source/mesa/patches/i915_fragment_shader_disable.patch.gz
--rw-r--r-- 1 root root     1191 Jan 30 23:05 ./testing/source/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz
--rw-r--r-- 1 root root      790 Feb  5  2007 ./testing/source/mesa/slack-desc
-drwxr-xr-x 7 root root     4096 Apr 17 21:21 ./testing/source/xf86-video-nouveau
--rw-r--r-- 1 root root      183 May 30  2009 ./testing/source/xf86-video-nouveau/arch.use.flags
-drwxr-xr-x 2 root root     4096 Apr 17 21:20 ./testing/source/xf86-video-nouveau/build
-drwxr-xr-x 2 root root     4096 Apr 17 21:20 ./testing/source/xf86-video-nouveau/configure
--rw-r--r-- 1 root root      262 Dec 13 03:07 ./testing/source/xf86-video-nouveau/configure/xf86-video-nouveau
-drwxr-xr-x 2 root root     4096 Apr 17 21:21 ./testing/source/xf86-video-nouveau/doinst.sh
--rwxr-xr-x 1 root root      897 Jan 31 07:24 ./testing/source/xf86-video-nouveau/get-xf86-video-nouveau.sh
--rw-r--r-- 1 root root     3645 Aug 31  2010 ./testing/source/xf86-video-nouveau/modularize
--rw-r--r-- 1 root root     1287 Mar  9 04:43 ./testing/source/xf86-video-nouveau/noarch
--rw-r--r-- 1 root root      726 Jun  8  2009 ./testing/source/xf86-video-nouveau/package-blacklist
-drwxr-xr-x 2 root root     4096 Apr 17 21:20 ./testing/source/xf86-video-nouveau/slack-desc
--rw-r--r-- 1 root root      895 Aug 26  2010 ./testing/source/xf86-video-nouveau/slack-desc/xf86-video-nouveau
-drwxr-xr-x 3 root root     4096 Apr 17 21:19 ./testing/source/xf86-video-nouveau/src
-drwxr-xr-x 2 root root     4096 Apr 17 21:19 ./testing/source/xf86-video-nouveau/src/driver
--rw-r--r-- 1 root root   117612 Apr 17 21:14 ./testing/source/xf86-video-nouveau/src/driver/xf86-video-nouveau-git_20110417_8378443.tar.xz
--rwxr-xr-x 1 root root    12129 Feb 22  2010 ./testing/source/xf86-video-nouveau/x11.SlackBuild
--rwxr-xr-x 1 root root       43 Apr 17 21:21 ./testing/source/xf86-video-nouveau/xf86-video-nouveau.SlackBuild
-drwxr-xr-x 2 root root     4096 Apr 22 21:45 ./usb-and-pxe-installers
--rw-r--r-- 1 root root    31203 Mar 21 21:21 ./usb-and-pxe-installers/README_PXE.TXT
--rw-r--r-- 1 root root     9198 Feb 17 11:46 ./usb-and-pxe-installers/README_USB.TXT
--rw-r--r-- 1 root root      414 Apr 23 21:43 ./usb-and-pxe-installers/pxelinux.cfg_default
--rw-r--r-- 1 root root 22832128 Apr 23 21:43 ./usb-and-pxe-installers/usbboot.img
--rw-r--r-- 1 root root    16349 Apr 16 19:11 ./usb-and-pxe-installers/usbimg2disk.sh
+drwxr-xr-x   3 root root      4096 2012-09-26 03:38 .
+-rw-r--r--   1 root root    423531 2012-09-26 03:38 ./CHECKSUMS.md5
+-rw-r--r--   1 root root       198 2012-09-26 03:38 ./CHECKSUMS.md5.asc
+-rw-r--r--   1 root root    590029 2012-09-26 03:38 ./FILELIST.TXT
+-rw-r--r--   1 root root    229153 2012-09-26 03:38 ./READ_DVD.TXT
+drwxr-xr-x  19 root root      4096 2012-09-26 03:38 ./source
+-rw-r--r--   1 root root    383911 2012-09-26 03:38 ./source/CHECKSUMS.md5
+-rw-r--r--   1 root root       198 2012-09-26 03:38 ./source/CHECKSUMS.md5.asc
+-rw-r--r--   1 root root    542117 2012-09-26 03:38 ./source/FILE_LIST
+-rw-r--r--   1 root root   8380089 2012-09-26 03:38 ./source/MANIFEST.bz2
+-rw-r--r--   1 root root      1314 2006-10-02 04:40 ./source/README.TXT
+drwxr-xr-x 101 root root      4096 2012-08-21 17:47 ./source/a
+drwxr-xr-x   2 root root      4096 2012-08-21 17:13 ./source/a/aaa_base
+-rw-r--r--   1 root root     11420 2012-08-16 03:47 ./source/a/aaa_base/_aaa_base.tar.gz
+-rwxr-xr-x   1 root root      2299 2012-08-21 17:14 ./source/a/aaa_base/aaa_base.SlackBuild
+-rw-r--r--   1 root root       327 2012-08-21 17:12 ./source/a/aaa_base/os-release
+-rw-r--r--   1 root root       786 2002-03-28 08:05 ./source/a/aaa_base/slack-desc
+-rw-r--r--   1 root root        15 2012-08-21 17:13 ./source/a/aaa_base/slackware-version
+drwxr-xr-x   2 root root      4096 2012-07-20 15:15 ./source/a/aaa_elflibs
+-rwxr-xr-x   1 root root      2622 2012-09-04 17:21 ./source/a/aaa_elflibs/aaa_elflibs.SlackBuild
+-rw-r--r--   1 root root      1030 2004-06-14 04:14 ./source/a/aaa_elflibs/slack-desc
+-rw-r--r--   1 root root      1417 2012-07-20 15:18 ./source/a/aaa_elflibs/symlinks-to-tracked-libs
+-rw-r--r--   1 root root       194 2010-11-03 17:47 ./source/a/aaa_elflibs/tracked-files
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/aaa_terminfo
+-rwxr-xr-x   1 root root      2464 2011-03-07 18:01 ./source/a/aaa_terminfo/aaa_terminfo.SlackBuild
+-rw-r--r--   1 root root       968 2007-01-02 23:40 ./source/a/aaa_terminfo/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 19:17 ./source/a/acl
+-rw-r--r--   1 root root    273328 2011-04-19 17:59 ./source/a/acl/acl-2.2.51.src.tar.xz
+-rwxr-xr-x   1 root root      3776 2012-06-28 19:18 ./source/a/acl/acl.SlackBuild
+-rw-r--r--   1 root root       509 2011-04-18 18:42 ./source/a/acl/acl.destdir.diff.gz
+-rw-r--r--   1 root root       870 2011-04-18 18:43 ./source/a/acl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-30 01:01 ./source/a/acpid
+-rw-r--r--   1 root root       224 2004-02-05 01:54 ./source/a/acpid/acpi_handler.sh.gz
+-rw-r--r--   1 root root    148196 2012-03-29 14:16 ./source/a/acpid/acpid-2.0.16.tar.xz
+-rwxr-xr-x   1 root root      3717 2012-03-30 00:49 ./source/a/acpid/acpid.SlackBuild
+-rw-r--r--   1 root root       399 2002-05-16 21:44 ./source/a/acpid/default.gz
+-rw-r--r--   1 root root       271 2010-01-16 00:00 ./source/a/acpid/doinst.sh.gz
+-rw-r--r--   1 root root       285 2010-02-16 22:57 ./source/a/acpid/rc.acpid.gz
+-rw-r--r--   1 root root       927 2011-04-16 04:07 ./source/a/acpid/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/apmd
+-rw-r--r--   1 root root     61686 2004-04-30 04:29 ./source/a/apmd/apmd-3.2.2.tar.bz2
+-rwxr-xr-x   1 root root      3572 2011-04-11 06:19 ./source/a/apmd/apmd.SlackBuild
+-rw-r--r--   1 root root      1009 2002-02-22 00:45 ./source/a/apmd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 19:16 ./source/a/attr
+-rw-r--r--   1 root root    238384 2011-04-19 17:59 ./source/a/attr/attr-2.4.46.src.tar.xz
+-rwxr-xr-x   1 root root      3842 2012-06-28 19:16 ./source/a/attr/attr.SlackBuild
+-rw-r--r--   1 root root       514 2011-04-18 18:28 ./source/a/attr/attr.destdir.diff.gz
+-rw-r--r--   1 root root        88 2006-02-28 00:02 ./source/a/attr/build
+-rw-r--r--   1 root root      1063 2011-04-18 18:00 ./source/a/attr/slack-desc
+drwxr-xr-x   3 root root      4096 2012-03-19 16:44 ./source/a/bash
+drwxr-xr-x   2 root root      4096 2012-08-10 22:08 ./source/a/bash/bash-4.2-patches
+-rw-r--r--   1 root root      2944 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-001
+-rw-r--r--   1 root root        65 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-001.sig
+-rw-r--r--   1 root root      1780 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-002
+-rw-r--r--   1 root root        65 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-002.sig
+-rw-r--r--   1 root root      6896 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-003
+-rw-r--r--   1 root root        65 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-003.sig
+-rw-r--r--   1 root root      1686 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-004
+-rw-r--r--   1 root root        65 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-004.sig
+-rw-r--r--   1 root root      3424 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-005
+-rw-r--r--   1 root root        65 2011-02-28 15:02 ./source/a/bash/bash-4.2-patches/bash42-005.sig
+-rw-r--r--   1 root root      1187 2011-03-02 01:01 ./source/a/bash/bash-4.2-patches/bash42-006
+-rw-r--r--   1 root root        65 2011-03-02 01:01 ./source/a/bash/bash-4.2-patches/bash42-006.sig
+-rw-r--r--   1 root root      1394 2011-03-06 19:59 ./source/a/bash/bash-4.2-patches/bash42-007
+-rw-r--r--   1 root root        65 2011-03-06 19:59 ./source/a/bash/bash-4.2-patches/bash42-007.sig
+-rw-r--r--   1 root root      2164 2011-03-14 19:35 ./source/a/bash/bash-4.2-patches/bash42-008
+-rw-r--r--   1 root root        65 2011-03-14 19:35 ./source/a/bash/bash-4.2-patches/bash42-008.sig
+-rw-r--r--   1 root root      2384 2011-05-03 16:07 ./source/a/bash/bash-4.2-patches/bash42-009
+-rw-r--r--   1 root root        72 2011-05-03 16:07 ./source/a/bash/bash-4.2-patches/bash42-009.sig
+-rw-r--r--   1 root root      1818 2011-05-03 16:07 ./source/a/bash/bash-4.2-patches/bash42-010
+-rw-r--r--   1 root root        72 2011-05-03 16:07 ./source/a/bash/bash-4.2-patches/bash42-010.sig
+-rw-r--r--   1 root root      1426 2011-11-21 22:59 ./source/a/bash/bash-4.2-patches/bash42-011
+-rw-r--r--   1 root root        72 2011-11-21 22:59 ./source/a/bash/bash-4.2-patches/bash42-011.sig
+-rw-r--r--   1 root root      4247 2011-11-21 22:59 ./source/a/bash/bash-4.2-patches/bash42-012
+-rw-r--r--   1 root root        72 2011-11-21 22:59 ./source/a/bash/bash-4.2-patches/bash42-012.sig
+-rw-r--r--   1 root root      1340 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-013
+-rw-r--r--   1 root root        72 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-013.sig
+-rw-r--r--   1 root root      1434 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-014
+-rw-r--r--   1 root root        72 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-014.sig
+-rw-r--r--   1 root root      1991 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-015
+-rw-r--r--   1 root root        72 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-015.sig
+-rw-r--r--   1 root root      1410 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-016
+-rw-r--r--   1 root root        72 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-016.sig
+-rw-r--r--   1 root root      1399 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-017
+-rw-r--r--   1 root root        72 2011-11-21 23:00 ./source/a/bash/bash-4.2-patches/bash42-017.sig
+-rw-r--r--   1 root root      1929 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-018
+-rw-r--r--   1 root root        72 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-018.sig
+-rw-r--r--   1 root root      1415 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-019
+-rw-r--r--   1 root root        72 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-019.sig
+-rw-r--r--   1 root root      1825 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-020
+-rw-r--r--   1 root root        72 2011-11-21 23:01 ./source/a/bash/bash-4.2-patches/bash42-020.sig
+-rw-r--r--   1 root root      1532 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-021
+-rw-r--r--   1 root root        72 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-021.sig
+-rw-r--r--   1 root root      1395 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-022
+-rw-r--r--   1 root root        71 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-022.sig
+-rw-r--r--   1 root root      1699 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-023
+-rw-r--r--   1 root root        72 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-023.sig
+-rw-r--r--   1 root root      1363 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-024
+-rw-r--r--   1 root root        72 2012-03-12 01:19 ./source/a/bash/bash-4.2-patches/bash42-024.sig
+-rw-r--r--   1 root root      3969 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-025
+-rw-r--r--   1 root root        72 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-025.sig
+-rw-r--r--   1 root root      1577 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-026
+-rw-r--r--   1 root root        72 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-026.sig
+-rw-r--r--   1 root root      1461 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-027
+-rw-r--r--   1 root root        72 2012-05-02 21:01 ./source/a/bash/bash-4.2-patches/bash42-027.sig
+-rw-r--r--   1 root root      1834 2012-05-02 21:02 ./source/a/bash/bash-4.2-patches/bash42-028
+-rw-r--r--   1 root root        72 2012-05-02 21:02 ./source/a/bash/bash-4.2-patches/bash42-028.sig
+-rw-r--r--   1 root root     16812 2012-05-30 00:45 ./source/a/bash/bash-4.2-patches/bash42-029
+-rw-r--r--   1 root root        72 2012-05-30 00:45 ./source/a/bash/bash-4.2-patches/bash42-029.sig
+-rw-r--r--   1 root root      5046 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-030
+-rw-r--r--   1 root root        72 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-030.sig
+-rw-r--r--   1 root root      2047 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-031
+-rw-r--r--   1 root root        72 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-031.sig
+-rw-r--r--   1 root root      2416 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-032
+-rw-r--r--   1 root root        72 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-032.sig
+-rw-r--r--   1 root root      1634 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-033
+-rw-r--r--   1 root root        72 2012-07-09 02:12 ./source/a/bash/bash-4.2-patches/bash42-033.sig
+-rw-r--r--   1 root root      1345 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-034
+-rw-r--r--   1 root root        72 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-034.sig
+-rw-r--r--   1 root root      1920 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-035
+-rw-r--r--   1 root root        72 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-035.sig
+-rw-r--r--   1 root root      3123 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-036
+-rw-r--r--   1 root root        72 2012-07-09 02:13 ./source/a/bash/bash-4.2-patches/bash42-036.sig
+-rw-r--r--   1 root root      3483 2012-07-16 21:20 ./source/a/bash/bash-4.2-patches/bash42-037
+-rw-r--r--   1 root root        72 2012-07-16 21:20 ./source/a/bash/bash-4.2-patches/bash42-037.sig
+-rw-r--r--   1 root root   4196384 2011-02-13 20:50 ./source/a/bash/bash-4.2.tar.xz
+-rwxr-xr-x   1 root root      4923 2012-03-19 16:42 ./source/a/bash/bash.SlackBuild
+-rw-r--r--   1 root root       189 2009-02-23 21:59 ./source/a/bash/doinst.sh.gz
+-rw-r--r--   1 root root       965 2002-03-23 21:47 ./source/a/bash/slack-desc
+drwxr-xr-x   3 root root      4096 2009-05-19 20:05 ./source/a/bin
+-rw-r--r--   1 root root      7275 1994-12-30 09:11 ./source/a/bin/banners.tar.gz
+-rwxr-xr-x   1 root root      4497 2010-07-28 02:46 ./source/a/bin/bin.SlackBuild
+-rw-r--r--   1 root root       478 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.dsc
+-rw-r--r--   1 root root    165590 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.tar.gz
+-rw-r--r--   1 root root     27721 1999-10-07 14:42 ./source/a/bin/fbset-2.1.tar.gz
+drwxr-xr-x   2 root root      4096 2006-12-23 06:28 ./source/a/bin/scripts
+-rw-r--r--   1 root root       195 2002-02-21 21:08 ./source/a/bin/scripts/diskcopy.gz
+-rw-r--r--   1 root root       595 1993-05-02 00:04 ./source/a/bin/scripts/xx.gz
+-rw-r--r--   1 root root       681 2006-12-21 20:40 ./source/a/bin/slack-desc
+-rw-r--r--   1 root root      2403 1997-06-15 20:38 ./source/a/bin/todos.tar.gz
+drwxr-xr-x   2 root root      4096 2012-08-21 17:29 ./source/a/btrfs-progs
+-rw-r--r--   1 root root    181468 2012-08-21 17:28 ./source/a/btrfs-progs/btrfs-progs-20120821.tar.xz
+-rwxr-xr-x   1 root root      3942 2012-08-10 17:07 ./source/a/btrfs-progs/btrfs-progs.SlackBuild
+-rw-r--r--   1 root root      1978 2011-03-27 22:24 ./source/a/btrfs-progs/fsck.btrfs
+-rw-r--r--   1 root root       953 2012-08-21 17:28 ./source/a/btrfs-progs/slack-desc
+drwxr-xr-x   2 root root      4096 2010-09-20 17:30 ./source/a/bzip2
+-rw-r--r--   1 root root    782025 2010-09-20 07:31 ./source/a/bzip2/bzip2-1.0.6.tar.gz
+-rwxr-xr-x   1 root root      4034 2010-09-20 17:34 ./source/a/bzip2/bzip2.SlackBuild
+-rw-r--r--   1 root root       288 2010-09-20 17:30 ./source/a/bzip2/bzip2.saneso.diff.gz
+-rw-r--r--   1 root root       934 2002-02-19 04:26 ./source/a/bzip2/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 16:39 ./source/a/coreutils
+-rw-r--r--   1 root root      1854 2011-04-14 20:27 ./source/a/coreutils/DIR_COLORS.gz
+-rw-r--r--   1 root root   5097392 2012-08-20 06:43 ./source/a/coreutils/coreutils-8.19.tar.xz
+-rw-r--r--   1 root root       836 2012-08-20 06:43 ./source/a/coreutils/coreutils-8.19.tar.xz.sig
+-rw-r--r--   1 root root       778 2010-04-28 05:16 ./source/a/coreutils/coreutils-dircolors.csh.gz
+-rw-r--r--   1 root root       931 2010-05-11 19:37 ./source/a/coreutils/coreutils-dircolors.sh.gz
+-rwxr-xr-x   1 root root      7287 2012-08-14 23:25 ./source/a/coreutils/coreutils.SlackBuild
+-rw-r--r--   1 root root      1610 2009-09-15 13:55 ./source/a/coreutils/coreutils.uname.diff.gz
+-rw-r--r--   1 root root       270 2009-02-23 03:00 ./source/a/coreutils/doinst.sh.gz
+-rw-r--r--   1 root root       985 2003-05-20 21:33 ./source/a/coreutils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-30 17:37 ./source/a/cpio
+-rw-r--r--   1 root root    809000 2010-03-10 13:15 ./source/a/cpio/cpio-2.11.tar.xz
+-rw-r--r--   1 root root      1315 2012-08-30 17:37 ./source/a/cpio/cpio.32bit.crc.diff.gz
+-rwxr-xr-x   1 root root      4304 2012-08-30 17:43 ./source/a/cpio/cpio.SlackBuild
+-rw-r--r--   1 root root       942 2002-03-23 21:52 ./source/a/cpio/slack-desc
+drwxr-xr-x   2 root root      4096 2011-02-25 20:06 ./source/a/cpufrequtils
+-rw-r--r--   1 root root     52186 2010-07-05 15:46 ./source/a/cpufrequtils/cpufrequtils-008.tar.bz2
+-rw-r--r--   1 root root       248 2010-07-05 15:46 ./source/a/cpufrequtils/cpufrequtils-008.tar.bz2.sign
+-rwxr-xr-x   1 root root      3298 2010-03-11 20:10 ./source/a/cpufrequtils/cpufrequtils.SlackBuild
+-rw-r--r--   1 root root      1083 2010-03-11 20:18 ./source/a/cpufrequtils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-06 02:59 ./source/a/cryptsetup
+-rw-r--r--   1 root root    798101 2012-05-31 08:16 ./source/a/cryptsetup/cryptsetup-1.4.3.tar.bz2
+-rw-r--r--   1 root root       836 2012-05-31 08:17 ./source/a/cryptsetup/cryptsetup-1.4.3.tar.bz2.asc
+-rwxr-xr-x   1 root root      4545 2012-06-25 23:29 ./source/a/cryptsetup/cryptsetup.SlackBuild
+-rw-r--r--   1 root root      1045 2010-11-08 02:48 ./source/a/cryptsetup/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-07 19:32 ./source/a/cups
+-rw-r--r--   1 root root   8740184 2012-07-25 20:45 ./source/a/cups/cups-1.5.4-source.tar.xz
+-rw-r--r--   1 root root    199167 2004-01-03 18:49 ./source/a/cups/cups-samba-5.0rc3.tar.gz
+-rw-r--r--   1 root root     38284 2006-04-19 23:55 ./source/a/cups/cups-windows-6.0-source.tar.bz2
+-rwxr-xr-x   1 root root      6355 2012-08-07 19:34 ./source/a/cups/cups.SlackBuild
+-rw-r--r--   1 root root        63 2012-08-02 18:50 ./source/a/cups/cups.url
+-rw-r--r--   1 root root       565 2010-05-17 07:39 ./source/a/cups/doinst.sh.gz
+-rw-r--r--   1 root root      1099 2002-02-01 20:47 ./source/a/cups/slack-desc
+-rw-r--r--   1 root root      1198 2012-08-06 10:15 ./source/a/cups/usb-backend-reset-after-job-only-for-specific-devices.patch.gz
+drwxr-xr-x   2 root root      4096 2010-08-10 03:02 ./source/a/cxxlibs
+-rwxr-xr-x   1 root root      2105 2012-07-13 17:33 ./source/a/cxxlibs/cxxlibs.SlackBuild
+-rw-r--r--   1 root root       738 2002-03-23 21:52 ./source/a/cxxlibs/slack-desc
+-rw-r--r--   1 root root        48 2012-07-13 17:38 ./source/a/cxxlibs/symlinks-to-tracked-libs
+-rw-r--r--   1 root root        52 2009-07-24 23:39 ./source/a/cxxlibs/symlinks-to-tracked-libs64
+drwxr-xr-x   2 root root      4096 2012-08-29 17:41 ./source/a/dbus
+-rw-r--r--   1 root root   1255584 2012-03-27 13:27 ./source/a/dbus/dbus-1.4.20.tar.xz
+-rw-r--r--   1 root root       486 2010-09-14 14:18 ./source/a/dbus/dbus-1.4.x-allow_root_globally.diff.gz
+-rwxr-xr-x   1 root root      4552 2012-08-29 17:42 ./source/a/dbus/dbus.SlackBuild
+-rw-r--r--   1 root root       374 2012-08-29 17:41 ./source/a/dbus/dbus.set.home.diff.gz
+-rw-r--r--   1 root root       333 2010-09-14 14:28 ./source/a/dbus/doinst.sh.gz
+-rw-r--r--   1 root root       824 2012-08-01 19:16 ./source/a/dbus/rc.messagebus.gz
+-rw-r--r--   1 root root       945 2007-10-21 22:41 ./source/a/dbus/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-07 20:20 ./source/a/dcron
+-rw-r--r--   1 root root       363 2011-08-22 21:26 ./source/a/dcron/crontab.c.O_EXCL.diff.gz
+-rw-r--r--   1 root root       487 2012-09-07 20:20 ./source/a/dcron/crontab.root.gz
+-rw-r--r--   1 root root     44978 2011-05-01 12:44 ./source/a/dcron/dcron-4.5.tar.gz
+-rwxr-xr-x   1 root root      3965 2012-09-07 20:13 ./source/a/dcron/dcron.SlackBuild
+-rw-r--r--   1 root root       239 2011-08-22 21:28 ./source/a/dcron/defs.h.TMPDIR.diff.gz
+-rw-r--r--   1 root root       104 2010-02-11 23:27 ./source/a/dcron/doinst.sh.gz
+-rw-r--r--   1 root root       699 2009-05-30 01:25 ./source/a/dcron/run-parts.8.gz
+-rw-r--r--   1 root root       563 2012-09-07 20:12 ./source/a/dcron/run-parts.gz
+-rw-r--r--   1 root root       815 2009-05-30 01:25 ./source/a/dcron/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/devs
+-rw-r--r--   1 root root     92572 2006-09-20 03:46 ./source/a/devs/_devs.tar.gz
+-rwxr-xr-x   1 root root      2044 2009-05-19 20:05 ./source/a/devs/devs.SlackBuild
+-rw-r--r--   1 root root       423 2002-06-09 19:32 ./source/a/devs/makedev.hd.diff.gz
+-rw-r--r--   1 root root     27096 2000-11-11 19:33 ./source/a/devs/makedev_2.3.1-46.2.diff.gz
+-rw-r--r--   1 root root       602 2003-09-02 20:00 ./source/a/devs/makedev_2.3.1.hd.diff.gz
+-rw-r--r--   1 root root     10037 1998-09-07 17:52 ./source/a/devs/makedev_2.3.1.orig.tar.gz
+-rw-r--r--   1 root root       262 2004-05-21 02:29 ./source/a/devs/makedev_2.3.1.slack.diff.gz
+-rw-r--r--   1 root root       766 2002-03-20 01:10 ./source/a/devs/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 02:49 ./source/a/dialog
+-rw-r--r--   1 root root    291512 2010-04-29 01:05 ./source/a/dialog/dialog-1.1-20100428.tar.xz
+-rwxr-xr-x   1 root root      4166 2011-04-04 05:42 ./source/a/dialog/dialog.SlackBuild
+-rw-r--r--   1 root root       334 2009-04-23 01:28 ./source/a/dialog/dialog.smaller.min.height.diff.gz
+-rw-r--r--   1 root root       970 2007-01-02 22:29 ./source/a/dialog/slack-desc
+drwxr-xr-x   2 root root      4096 2011-02-25 19:44 ./source/a/dosfstools
+-rw-r--r--   1 root root     70039 2010-12-24 17:00 ./source/a/dosfstools/dosfstools-3.0.11.tar.bz2
+-rw-r--r--   1 root root       198 2010-12-24 17:00 ./source/a/dosfstools/dosfstools-3.0.11.tar.bz2.sign
+-rwxr-xr-x   1 root root      4114 2011-04-07 23:13 ./source/a/dosfstools/dosfstools.SlackBuild
+-rw-r--r--   1 root root       332 2011-02-25 19:45 ./source/a/dosfstools/dosfstools.paths.diff.gz
+-rw-r--r--   1 root root       742 2006-12-21 20:33 ./source/a/dosfstools/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-24 18:38 ./source/a/e2fsprogs
+-rw-r--r--   1 root root       325 2009-05-30 01:25 ./source/a/e2fsprogs/doinst.sh.gz
+-rw-r--r--   1 root root       543 2012-09-23 02:50 ./source/a/e2fsprogs/e2fsprogs-1.42.6.tar.sign
+-rw-r--r--   1 root root   4593552 2012-09-23 02:50 ./source/a/e2fsprogs/e2fsprogs-1.42.6.tar.xz
+-rwxr-xr-x   1 root root      5418 2012-06-20 01:51 ./source/a/e2fsprogs/e2fsprogs.SlackBuild
+-rw-r--r--   1 root root       803 2009-05-30 01:25 ./source/a/e2fsprogs/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-24 20:12 ./source/a/ed
+-rw-r--r--   1 root root     63956 2012-01-01 21:43 ./source/a/ed/ed-1.6.tar.xz
+-rwxr-xr-x   1 root root      3812 2010-07-28 02:54 ./source/a/ed/ed.SlackBuild
+-rw-r--r--   1 root root       805 2006-12-13 23:11 ./source/a/ed/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 17:45 ./source/a/eject
+-rw-r--r--   1 root root    107301 2006-06-04 19:58 ./source/a/eject/eject-2.1.5.tar.bz2
+-rwxr-xr-x   1 root root      3591 2012-09-04 17:46 ./source/a/eject/eject.SlackBuild
+-rw-r--r--   1 root root       883 2010-01-25 21:57 ./source/a/eject/eject.spaces.diff.gz
+-rw-r--r--   1 root root       298 2007-03-13 09:34 ./source/a/eject/eject_for_mac.patch.gz
+-rw-r--r--   1 root root       886 2006-12-14 01:32 ./source/a/eject/slack-desc
+drwxr-xr-x   2 root root      4096 2010-01-27 18:31 ./source/a/elvis
+-rw-r--r--   1 root root   1143603 2003-10-21 02:35 ./source/a/elvis/elvis-2.2_0.tar.bz2
+-rwxr-xr-x   1 root root      4002 2010-01-27 18:32 ./source/a/elvis/elvis.SlackBuild
+-rw-r--r--   1 root root      1633 2004-02-22 06:19 ./source/a/elvis/elvis.clr
+-rw-r--r--   1 root root      1584 2003-10-21 02:32 ./source/a/elvis/elvis.clr.orig
+-rw-r--r--   1 root root       673 2010-01-27 18:31 ./source/a/elvis/elvis.ref.c.getline.diff.gz
+-rw-r--r--   1 root root       845 2008-02-11 03:44 ./source/a/elvis/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 17:43 ./source/a/etc
+-rw-r--r--   1 root root     33969 2012-09-04 17:43 ./source/a/etc/_etc.tar.gz
+-rwxr-xr-x   1 root root      2030 2012-09-04 17:43 ./source/a/etc/etc.SlackBuild
+-rw-r--r--   1 root root       536 2002-10-11 20:17 ./source/a/etc/nsswitch.conf.gz
+-rw-r--r--   1 root root       657 2002-03-23 21:54 ./source/a/etc/slack-desc
+-rw-r--r--   1 root root    226973 2000-03-02 23:51 ./source/a/etc/termcap-BSD.gz
+drwxr-xr-x   2 root root      4096 2012-06-28 17:43 ./source/a/file
+-rw-r--r--   1 root root    444104 2012-02-21 19:19 ./source/a/file/file-5.11.tar.xz
+-rwxr-xr-x   1 root root      5048 2011-10-03 05:00 ./source/a/file/file.SlackBuild
+-rw-r--r--   1 root root       195 2009-02-23 01:20 ./source/a/file/file.crdaregbin.magic.gz
+-rw-r--r--   1 root root       212 2009-06-12 22:40 ./source/a/file/file.etc.file.diff.gz
+-rw-r--r--   1 root root       336 2009-02-09 04:19 ./source/a/file/file.quiet.diff.gz
+-rw-r--r--   1 root root       250 2011-08-24 02:10 ./source/a/file/file.short.diff.gz
+-rw-r--r--   1 root root       248 2009-04-23 04:50 ./source/a/file/file.xz.magic.gz
+-rw-r--r--   1 root root       214 2005-09-07 03:59 ./source/a/file/file.zisofs.magic.gz
+-rw-r--r--   1 root root       727 2011-05-28 19:19 ./source/a/file/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-13 00:01 ./source/a/findutils
+-rw-r--r--   1 root root   1114432 2009-06-06 14:38 ./source/a/findutils/findutils-4.4.2.tar.xz
+-rwxr-xr-x   1 root root      3850 2010-07-28 02:56 ./source/a/findutils/findutils.SlackBuild
+-rw-r--r--   1 root root       186 2009-02-21 21:50 ./source/a/findutils/findutils.no.default.options.warnings.diff.gz
+-rw-r--r--   1 root root       359 2009-02-21 21:19 ./source/a/findutils/findutils.nolocate.diff.gz
+-rw-r--r--   1 root root       828 2002-04-07 10:22 ./source/a/findutils/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 02:17 ./source/a/floppy
+-rw-r--r--   1 root root     25310 2002-05-01 02:18 ./source/a/floppy/fdutils-5.4-20020222.diff.gz
+-rw-r--r--   1 root root    190535 2001-02-04 04:36 ./source/a/floppy/fdutils-5.4.tar.gz
+-rw-r--r--   1 root root       182 2001-02-04 05:02 ./source/a/floppy/fdutils.mediaprm.diff.gz
+-rwxr-xr-x   1 root root      3661 2010-07-28 02:56 ./source/a/floppy/floppy.SlackBuild
+-rw-r--r--   1 root root     11298 2002-05-01 02:21 ./source/a/floppy/mediaprm
+-rw-r--r--   1 root root    286730 2001-05-27 12:42 ./source/a/floppy/mtools-3.9.8.tar.gz
+-rw-r--r--   1 root root      1914 2001-02-04 04:50 ./source/a/floppy/mtools.conf
+-rw-r--r--   1 root root       728 2002-03-23 21:55 ./source/a/floppy/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-09 18:52 ./source/a/gawk
+-rw-r--r--   1 root root   1523944 2010-05-07 21:41 ./source/a/gawk/gawk-3.1.8.tar.xz
+-rwxr-xr-x   1 root root      3742 2010-05-09 18:52 ./source/a/gawk/gawk.SlackBuild
+-rw-r--r--   1 root root      1043 2002-03-23 21:56 ./source/a/gawk/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/genpower
+-rw-r--r--   1 root root     66728 2005-01-04 22:32 ./source/a/genpower/genpower-1.0.5.tar.gz
+-rwxr-xr-x   1 root root      3352 2010-07-28 02:57 ./source/a/genpower/genpower.SlackBuild
+-rw-r--r--   1 root root       514 2008-12-03 00:22 ./source/a/genpower/genpower.halt.diff.gz
+-rw-r--r--   1 root root       460 2002-04-11 03:18 ./source/a/genpower/genpower.var.diff.gz
+-rw-r--r--   1 root root       957 2002-04-11 05:06 ./source/a/genpower/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-14 08:25 ./source/a/gettext
+-rw-r--r--   1 root root  11941176 2010-06-06 22:08 ./source/a/gettext/gettext-0.18.1.1.tar.bz2
+-rwxr-xr-x   1 root root      3601 2012-06-20 01:36 ./source/a/gettext/gettext-tools.SlackBuild
+-rwxr-xr-x   1 root root      3336 2012-06-20 01:36 ./source/a/gettext/gettext.SlackBuild
+-rw-r--r--   1 root root       737 2008-02-11 03:44 ./source/a/gettext/slack-desc
+-rw-r--r--   1 root root      1093 2008-02-11 03:44 ./source/a/gettext/slack-desc.gettext-tools
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/getty-ps
+-rwxr-xr-x   1 root root      2942 2010-07-28 02:57 ./source/a/getty-ps/getty-ps.SlackBuild
+-rw-r--r--   1 root root      3609 2005-07-21 12:27 ./source/a/getty-ps/getty.bugfixes.diff.gz
+-rw-r--r--   1 root root      1223 2002-10-04 05:00 ./source/a/getty-ps/getty_ps-2.1.0.lsm
+-rw-r--r--   1 root root    117414 2005-07-21 12:27 ./source/a/getty-ps/getty_ps-2.1.0b.tar.gz
+-rw-r--r--   1 root root       969 2008-02-11 03:44 ./source/a/getty-ps/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/gpm
+-rw-r--r--   1 root root       344 2004-10-13 20:51 ./source/a/gpm/gpm-1.20.1-consolename.patch.gz
+-rw-r--r--   1 root root       404 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-gpmopen.patch.gz
+-rw-r--r--   1 root root       274 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-idie.patch.gz
+-rw-r--r--   1 root root       289 2006-12-12 02:00 ./source/a/gpm/gpm-1.20.1-input-defines.diff.gz
+-rw-r--r--   1 root root       301 2004-09-23 18:46 ./source/a/gpm/gpm-1.20.1-input.patch.gz
+-rw-r--r--   1 root root       362 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-lib-silent.patch.gz
+-rw-r--r--   1 root root       294 2004-09-09 05:51 ./source/a/gpm/gpm-1.20.1-math.patch.gz
+-rw-r--r--   1 root root       791 2004-10-20 21:28 ./source/a/gpm/gpm-1.20.1-multilib.patch.gz
+-rw-r--r--   1 root root       356 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-no-console-error.patch.gz
+-rw-r--r--   1 root root       249 2004-10-13 20:03 ./source/a/gpm/gpm-1.20.1-nodebug.patch.gz
+-rw-r--r--   1 root root       237 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-subscript.patch.gz
+-rw-r--r--   1 root root       515 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-weak-wgetch.patch.gz
+-rw-r--r--   1 root root       651 2006-08-20 19:46 ./source/a/gpm/gpm-1.20.1.send-noise-to-syslogs.diff.gz
+-rw-r--r--   1 root root    565014 2004-06-25 18:13 ./source/a/gpm/gpm-1.20.1.tar.bz2
+-rw-r--r--   1 root root     59408 2004-09-09 05:52 ./source/a/gpm/gpm-evdev-cumulative.patch.gz
+-rwxr-xr-x   1 root root      5750 2010-07-28 02:57 ./source/a/gpm/gpm.SlackBuild
+-rw-r--r--   1 root root       285 2006-02-07 21:26 ./source/a/gpm/gpm.evdevmakefile.patch.gz
+-rw-r--r--   1 root root      4268 2004-09-09 05:52 ./source/a/gpm/inputattach.c.gz
+-rw-r--r--   1 root root       168 2001-04-15 23:47 ./source/a/gpm/mouseconfig.gz
+-rw-r--r--   1 root root      2117 2008-03-15 20:30 ./source/a/gpm/setup.mouse.gz
+-rw-r--r--   1 root root       965 2002-05-29 01:05 ./source/a/gpm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-06 21:37 ./source/a/gptfdisk
+-rw-r--r--   1 root root    120060 2012-05-30 16:32 ./source/a/gptfdisk/gptfdisk-0.8.5.tar.xz
+-rwxr-xr-x   1 root root      3684 2012-08-06 21:38 ./source/a/gptfdisk/gptfdisk.SlackBuild
+-rw-r--r--   1 root root       498 2012-08-06 21:37 ./source/a/gptfdisk/gptfdisk.remove.icu4c.dep.diff.gz
+-rw-r--r--   1 root root      1027 2012-08-04 18:26 ./source/a/gptfdisk/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 16:43 ./source/a/grep
+-rw-r--r--   1 root root   1195640 2012-08-20 06:22 ./source/a/grep/grep-2.14.tar.xz
+-rw-r--r--   1 root root       836 2012-08-20 06:22 ./source/a/grep/grep-2.14.tar.xz.sig
+-rwxr-xr-x   1 root root      3911 2012-09-04 16:43 ./source/a/grep/grep.SlackBuild
+-rw-r--r--   1 root root       747 2002-04-02 08:53 ./source/a/grep/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/a/gzip
+-rw-r--r--   1 root root    720956 2012-06-17 19:29 ./source/a/gzip/gzip-1.5.tar.xz
+-rw-r--r--   1 root root       836 2012-06-17 19:29 ./source/a/gzip/gzip-1.5.tar.xz.sig
+-rwxr-xr-x   1 root root      4934 2012-07-09 06:35 ./source/a/gzip/gzip.SlackBuild
+-rw-r--r--   1 root root       770 2002-03-23 21:58 ./source/a/gzip/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-26 23:02 ./source/a/hdparm
+-rw-r--r--   1 root root    122062 2011-01-24 15:17 ./source/a/hdparm/hdparm-9.37.tar.gz
+-rwxr-xr-x   1 root root      2886 2010-07-28 03:19 ./source/a/hdparm/hdparm.SlackBuild
+-rw-r--r--   1 root root       805 2002-02-22 00:10 ./source/a/hdparm/slack-desc
+drwxr-xr-x   2 root root      4096 2009-08-24 08:47 ./source/a/infozip
+-rwxr-xr-x   1 root root      3434 2010-07-28 03:21 ./source/a/infozip/infozip.SlackBuild
+-rw-r--r--   1 root root       924 2002-03-29 01:12 ./source/a/infozip/slack-desc
+-rw-r--r--   1 root root    882180 2009-01-02 16:33 ./source/a/infozip/unzip60.tar.xz
+-rw-r--r--   1 root root    775420 2008-07-05 17:31 ./source/a/infozip/zip30.tar.xz
+drwxr-xr-x   2 root root      4096 2010-05-08 07:54 ./source/a/inotify-tools
+-rw-r--r--   1 root root    243384 2010-03-14 13:56 ./source/a/inotify-tools/inotify-tools-3.14.tar.xz
+-rwxr-xr-x   1 root root      3972 2010-05-08 07:55 ./source/a/inotify-tools/inotify-tools.SlackBuild
+-rw-r--r--   1 root root       977 2008-02-11 03:44 ./source/a/inotify-tools/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-13 05:03 ./source/a/isapnptools
+-rw-r--r--   1 root root      1015 2001-05-09 02:53 ./source/a/isapnptools/isapnptools-1.26.lsm
+-rw-r--r--   1 root root    167560 2001-05-09 02:57 ./source/a/isapnptools/isapnptools-1.26.tar.xz
+-rwxr-xr-x   1 root root      2997 2012-07-13 05:03 ./source/a/isapnptools/isapnptools.SlackBuild
+-rw-r--r--   1 root root        45 2002-02-22 01:45 ./source/a/isapnptools/isapnptools.url
+-rw-r--r--   1 root root      6313 2004-12-23 05:17 ./source/a/isapnptools/isapnptools_1.26-5.diff.gz
+-rw-r--r--   1 root root       722 2002-03-23 21:59 ./source/a/isapnptools/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-29 19:00 ./source/a/jfsutils
+-rw-r--r--   1 root root    374892 2011-03-04 19:26 ./source/a/jfsutils/jfsutils-1.1.15.tar.xz
+-rwxr-xr-x   1 root root      3694 2011-03-29 19:01 ./source/a/jfsutils/jfsutils.SlackBuild
+-rw-r--r--   1 root root       998 2003-02-16 21:43 ./source/a/jfsutils/slack-desc
+drwxr-xr-x   3 root root      4096 2012-06-25 22:55 ./source/a/kbd
+-rwxr-xr-x   1 root root      7573 2012-08-21 17:23 ./source/a/kbd/kbd.SlackBuild
+-rw-r--r--   1 root root     11717 2010-04-29 06:02 ./source/a/kbd/setconsolefont
+-rw-r--r--   1 root root       283 2009-05-14 19:13 ./source/a/kbd/setup.setconsolefont
+-rw-r--r--   1 root root       919 2003-02-27 23:42 ./source/a/kbd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 17:34 ./source/a/kbd/sources
+-rw-r--r--   1 root root     24797 2001-05-26 05:49 ./source/a/kbd/sources/extraf.tgz
+-rw-r--r--   1 root root       960 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch.gz
+-rw-r--r--   1 root root       270 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch.gz
+-rw-r--r--   1 root root       399 2009-08-25 01:23 ./source/a/kbd/sources/kbd-1.15-unicode_start.patch.gz
+-rw-r--r--   1 root root       213 2010-04-29 05:19 ./source/a/kbd/sources/kbd-1.15.2-po.patch.gz
+-rw-r--r--   1 root root       305 2011-08-25 02:04 ./source/a/kbd/sources/kbd-1.15.3-fix-es-translation.patch.gz
+-rw-r--r--   1 root root    761072 2012-06-28 17:33 ./source/a/kbd/sources/kbd-1.15.3.tar.xz
+-rw-r--r--   1 root root      4291 2007-10-15 12:16 ./source/a/kbd/sources/kbd-latarcyrheb-16-fixed.tar.bz2
+-rw-r--r--   1 root root      6155 2006-09-29 11:13 ./source/a/kbd/sources/kbd-latsun-fonts.tar.bz2
+-rw-r--r--   1 root root       224 2004-05-30 04:18 ./source/a/kbd/sources/nl.euro.diff.gz
+-rw-r--r--   1 root root      2338 2007-11-14 11:41 ./source/a/kbd/sources/ro_maps.tar.bz2
+-rw-r--r--   1 root root      3543 2002-05-24 21:22 ./source/a/kbd/sources/speakup-jfw.tar.gz
+-rw-r--r--   1 root root      2246 2001-10-05 13:14 ./source/a/kbd/sources/speakupmap.map.gz
+drwxr-xr-x   2 root root      4096 2011-08-14 23:33 ./source/a/kernel-firmware
+-rwxr-xr-x   1 root root      1741 2011-08-14 23:33 ./source/a/kernel-firmware/kernel-firmware.SlackBuild
+-rw-r--r--   1 root root       892 2011-08-14 23:19 ./source/a/kernel-firmware/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:53 ./source/a/kmod
+-rw-r--r--   1 root root   1122668 2012-06-19 22:50 ./source/a/kmod/kmod-9.tar.xz
+-rwxr-xr-x   1 root root      4215 2012-07-08 16:55 ./source/a/kmod/kmod.SlackBuild
+-rw-r--r--   1 root root      1000 2012-06-28 01:42 ./source/a/kmod/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-13 19:51 ./source/a/less
+-rw-r--r--   1 root root    236984 2012-09-04 20:06 ./source/a/less/less-451.tar.xz
+-rwxr-xr-x   1 root root      3397 2012-06-25 22:55 ./source/a/less/less.SlackBuild
+-rw-r--r--   1 root root       313 2002-05-28 00:15 ./source/a/less/less.sysconfdir.diff.gz
+-rw-r--r--   1 root root      1355 2009-11-05 23:57 ./source/a/less/lesspipe.sh.gz
+-rw-r--r--   1 root root       841 2002-03-23 22:00 ./source/a/less/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/lha
+-rw-r--r--   1 root root     64608 2000-12-15 12:20 ./source/a/lha/lha-114i.tar.gz
+-rwxr-xr-x   1 root root      2808 2010-07-28 03:26 ./source/a/lha/lha.SlackBuild
+-rw-r--r--   1 root root     45132 2006-12-13 19:47 ./source/a/lha/lha_1.14i-10.1.diff.gz
+-rw-r--r--   1 root root       606 2006-12-23 05:46 ./source/a/lha/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-20 00:53 ./source/a/libcgroup
+-rw-r--r--   1 root root       513 2011-01-10 20:23 ./source/a/libcgroup/doinst.sh.gz
+-rw-r--r--   1 root root    399252 2012-02-20 08:52 ./source/a/libcgroup/libcgroup-0.38.tar.xz
+-rwxr-xr-x   1 root root      4867 2011-03-03 18:41 ./source/a/libcgroup/libcgroup.SlackBuild
+-rw-r--r--   1 root root       282 2011-01-10 20:16 ./source/a/libcgroup/libcgroup.conf.diff.gz
+-rw-r--r--   1 root root      1260 2011-03-03 20:23 ./source/a/libcgroup/libcgroup.init.diff.gz
+-rw-r--r--   1 root root      1057 2011-01-10 19:23 ./source/a/libcgroup/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-17 23:36 ./source/a/lilo
+-rw-r--r--   1 root root    580758 2011-08-12 00:08 ./source/a/lilo/lilo-23.2.tar.gz
+-rw-r--r--   1 root root       189 2011-08-12 00:08 ./source/a/lilo/lilo-23.2.tar.gz.asc
+-rwxr-xr-x   1 root root      3419 2012-08-17 23:37 ./source/a/lilo/lilo.SlackBuild
+-rw-r--r--   1 root root       709 2009-12-18 05:12 ./source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff.gz
+-rw-r--r--   1 root root     39627 2012-08-14 18:03 ./source/a/lilo/liloconfig
+-rw-r--r--   1 root root       105 2002-03-09 08:27 ./source/a/lilo/setup.liloconfig
+-rw-r--r--   1 root root     14406 2011-03-27 05:51 ./source/a/lilo/sl1337.bmp
+-rw-r--r--   1 root root      1045 2002-03-23 22:00 ./source/a/lilo/slack-desc
+-rw-r--r--   1 root root     14174 2010-02-15 01:57 ./source/a/lilo/slack.bmp
+-rw-r--r--   1 root root       133 2008-02-22 00:08 ./source/a/lilo/slack.dat
+-rw-r--r--   1 root root    118256 2012-08-14 17:56 ./source/a/lilo/slack14.0.2012.bmp
+-rw-r--r--   1 root root     15634 2011-03-27 05:32 ./source/a/lilo/slack64.bmp
+-rw-r--r--   1 root root      3331 1994-07-08 18:55 ./source/a/lilo/text.lilohelp
+drwxr-xr-x   2 root root      4096 2012-08-10 20:57 ./source/a/logrotate
+-rw-r--r--   1 root root       268 2009-05-30 01:28 ./source/a/logrotate/doinst.sh.gz
+-rw-r--r--   1 root root     43876 2012-08-01 11:18 ./source/a/logrotate/logrotate-3.8.2.tar.xz
+-rwxr-xr-x   1 root root      3483 2012-08-10 20:57 ./source/a/logrotate/logrotate.SlackBuild
+-rw-r--r--   1 root root       645 2009-05-30 01:28 ./source/a/logrotate/logrotate.conf.gz
+-rw-r--r--   1 root root       137 2012-07-25 00:24 ./source/a/logrotate/logrotate.cron.gz
+-rw-r--r--   1 root root       573 2011-08-22 20:56 ./source/a/logrotate/logrotate.slackware.diff.gz
+-rw-r--r--   1 root root       993 2009-05-30 01:28 ./source/a/logrotate/slack-desc
+drwxr-xr-x   2 root root      4096 2011-04-17 20:11 ./source/a/lrzip
+-rw-r--r--   1 root root       266 2011-04-17 20:11 ./source/a/lrzip/doinst.sh.gz
+-rw-r--r--   1 root root    345788 2011-04-13 05:35 ./source/a/lrzip/lrzip-0.602.tar.xz
+-rwxr-xr-x   1 root root      3967 2011-04-17 20:12 ./source/a/lrzip/lrzip.SlackBuild
+-rw-r--r--   1 root root       904 2011-04-17 20:04 ./source/a/lrzip/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-16 02:45 ./source/a/lvm2
+-rw-r--r--   1 root root    868512 2012-06-08 23:41 ./source/a/lvm2/LVM2.2.02.96.tar.xz
+-rw-r--r--   1 root root       271 2008-10-06 12:21 ./source/a/lvm2/doinst.sh.gz
+-rw-r--r--   1 root root       701 2012-05-28 20:56 ./source/a/lvm2/fix-build-with-udev-183.patch.gz
+-rwxr-xr-x   1 root root      4681 2012-07-22 17:22 ./source/a/lvm2/lvm2.SlackBuild
+-rw-r--r--   1 root root      1012 2008-02-08 17:26 ./source/a/lvm2/slack-desc
+drwxr-xr-x   2 root root      4096 2010-09-27 22:42 ./source/a/mcelog
+-rw-r--r--   1 root root       355 2010-09-27 22:42 ./source/a/mcelog/doinst.sh.gz
+-rw-r--r--   1 root root    167285 2010-01-21 02:40 ./source/a/mcelog/mcelog-1.0pre3.tar.bz2
+-rw-r--r--   1 root root       248 2010-01-21 02:40 ./source/a/mcelog/mcelog-1.0pre3.tar.bz2.sign
+-rwxr-xr-x   1 root root      2964 2010-09-27 22:41 ./source/a/mcelog/mcelog.SlackBuild
+-rw-r--r--   1 root root       712 2010-09-27 22:23 ./source/a/mcelog/mcelog.init.diff.gz
+-rw-r--r--   1 root root      1044 2010-09-27 22:35 ./source/a/mcelog/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-06 02:40 ./source/a/mdadm
+-rw-r--r--   1 root root       261 2004-05-27 18:31 ./source/a/mdadm/doinst.sh.gz
+-rw-r--r--   1 root root    363408 2012-05-18 07:14 ./source/a/mdadm/mdadm-3.2.5.tar.xz
+-rwxr-xr-x   1 root root      3696 2012-07-06 02:38 ./source/a/mdadm/mdadm.SlackBuild
+-rw-r--r--   1 root root       928 2004-05-27 18:23 ./source/a/mdadm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-10 20:01 ./source/a/minicom
+-rw-r--r--   1 root root       503 2008-09-30 10:20 ./source/a/minicom/config.sub-x86_64.diff.gz
+-rw-r--r--   1 root root       290 2011-02-01 21:44 ./source/a/minicom/doinst.sh.gz
+-rw-r--r--   1 root root     30271 2009-11-23 17:02 ./source/a/minicom/lrzsz_0.12.21-5.diff.gz
+-rw-r--r--   1 root root    287790 1999-09-19 19:01 ./source/a/minicom/lrzsz_0.12.21.orig.tar.gz
+-rw-r--r--   1 root root    454176 2011-12-27 22:43 ./source/a/minicom/minicom-2.6.tar.xz
+-rwxr-xr-x   1 root root      4939 2012-08-10 20:02 ./source/a/minicom/minicom.SlackBuild
+-rw-r--r--   1 root root       570 2004-09-04 21:17 ./source/a/minicom/minicom.users.gz
+-rw-r--r--   1 root root       781 2002-03-29 01:13 ./source/a/minicom/slack-desc
+drwxr-xr-x   3 root root      4096 2012-08-21 18:14 ./source/a/mkinitrd
+-rw-r--r--   1 root root      3752 2012-06-12 13:27 ./source/a/mkinitrd/README.initrd
+-rw-r--r--   1 root root      2699 2012-07-06 04:14 ./source/a/mkinitrd/_initrd-tree.tar.gz
+-rw-r--r--   1 root root   1940164 2012-06-12 14:37 ./source/a/mkinitrd/busybox-1.20.1.tar.xz
+lrwxrwxrwx   1 root root        25 2012-06-12 14:38 ./source/a/mkinitrd/busybox-dot-config -> busybox-dot-config.1.20.x
+-rw-r--r--   1 root root     21604 2009-12-18 05:10 ./source/a/mkinitrd/busybox-dot-config.1.15.x
+-rw-r--r--   1 root root     23672 2011-02-28 03:49 ./source/a/mkinitrd/busybox-dot-config.1.17.x
+-rw-r--r--   1 root root     24220 2011-03-26 04:08 ./source/a/mkinitrd/busybox-dot-config.1.18.x
+-rw-r--r--   1 root root     25014 2011-12-11 02:45 ./source/a/mkinitrd/busybox-dot-config.1.19.x
+-rw-r--r--   1 root root     25328 2012-06-12 14:42 ./source/a/mkinitrd/busybox-dot-config.1.20.x
+drwxr-xr-x   2 root root      4096 2012-06-12 14:45 ./source/a/mkinitrd/fixes-1.20.1
+-rw-r--r--   1 root root       490 2012-06-09 06:35 ./source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ash.patch
+-rw-r--r--   1 root root      2562 2012-06-09 06:35 ./source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ifupdown.patch
+-rw-r--r--   1 root root       930 2012-06-09 06:35 ./source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-man.patch
+-rw-r--r--   1 root root       387 2012-06-09 06:35 ./source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-tar.patch
+-rwxr-xr-x   1 root root     10746 2012-08-21 17:38 ./source/a/mkinitrd/init
+-rw-r--r--   1 root root     29903 2009-12-18 05:10 ./source/a/mkinitrd/keymaps.tar.gz
+-rw-r--r--   1 root root     23415 2012-08-21 18:03 ./source/a/mkinitrd/mkinitrd
+-rw-r--r--   1 root root      7903 2012-08-21 17:51 ./source/a/mkinitrd/mkinitrd.8
+-rwxr-xr-x   1 root root      4626 2012-09-04 17:10 ./source/a/mkinitrd/mkinitrd.SlackBuild
+-rw-r--r--   1 root root      5898 2010-08-29 03:18 ./source/a/mkinitrd/mkinitrd.conf.5
+-rw-r--r--   1 root root       415 2010-08-29 03:21 ./source/a/mkinitrd/mkinitrd.conf.sample
+-rw-r--r--   1 root root     27921 2011-02-17 09:27 ./source/a/mkinitrd/mkinitrd_command_generator.sh
+-rw-r--r--   1 root root       988 2009-12-18 05:07 ./source/a/mkinitrd/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/mt-st
+-rw-r--r--   1 root root       375 2007-05-15 02:19 ./source/a/mt-st/_mt-st.tar.gz
+-rw-r--r--   1 root root     36537 2005-08-21 19:14 ./source/a/mt-st/mt-st-0.9b.tar.gz
+-rwxr-xr-x   1 root root      2977 2010-07-28 03:27 ./source/a/mt-st/mt-st.SlackBuild
+-rw-r--r--   1 root root       949 2005-04-07 06:26 ./source/a/mt-st/mt-st.config.diff.gz
+-rw-r--r--   1 root root       358 2005-10-25 10:17 ./source/a/mt-st/mt-st.man.diff.gz
+-rw-r--r--   1 root root       236 2004-09-09 08:51 ./source/a/mt-st/mt-st.sdlt.diff.gz
+-rw-r--r--   1 root root       943 2002-02-24 20:29 ./source/a/mt-st/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 03:30 ./source/a/mtx
+-rw-r--r--   1 root root    235214 2009-02-15 18:02 ./source/a/mtx/mtx-1.3.12.tar.gz
+-rwxr-xr-x   1 root root      3021 2010-07-28 03:30 ./source/a/mtx/mtx.SlackBuild
+-rw-r--r--   1 root root       854 2007-01-25 23:21 ./source/a/mtx/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 03:33 ./source/a/ncompress
+-rw-r--r--   1 root root     32473 2010-01-29 23:54 ./source/a/ncompress/ncompress-4.2.4.3.tar.gz
+-rwxr-xr-x   1 root root      2865 2010-07-28 03:34 ./source/a/ncompress/ncompress.SlackBuild
+-rw-r--r--   1 root root      1020 2006-12-14 01:48 ./source/a/ncompress/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 19:40 ./source/a/ntfs-3g
+-rw-r--r--   1 root root      2067 2010-01-18 16:00 ./source/a/ntfs-3g/10-ntfs-3g-policy.fdi
+-rw-r--r--   1 root root       125 2012-06-28 19:40 ./source/a/ntfs-3g/99-ntfs-3g.rules
+-rwxr-xr-x   1 root root      5036 2012-07-16 18:44 ./source/a/ntfs-3g/ntfs-3g.SlackBuild
+-rw-r--r--   1 root root    733600 2012-01-15 13:27 ./source/a/ntfs-3g/ntfs-3g_ntfsprogs-2012.1.15.tar.xz
+-rw-r--r--   1 root root      1003 2008-03-15 03:46 ./source/a/ntfs-3g/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-18 19:54 ./source/a/patch
+-rw-r--r--   1 root root    674544 2012-09-12 09:45 ./source/a/patch/patch-2.7.tar.xz
+-rw-r--r--   1 root root       198 2012-09-12 09:45 ./source/a/patch/patch-2.7.tar.xz.sig
+-rw-r--r--   1 root root      1024 2012-09-18 18:05 ./source/a/patch/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff.gz
+-rw-r--r--   1 root root       865 2012-09-18 18:06 ./source/a/patch/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff.gz
+-rwxr-xr-x   1 root root      3664 2012-09-18 19:54 ./source/a/patch/patch.SlackBuild
+-rw-r--r--   1 root root      1020 2006-12-14 02:21 ./source/a/patch/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-03 02:56 ./source/a/pciutils
+-rw-r--r--   1 root root    265192 2012-02-14 01:04 ./source/a/pciutils/pciutils-3.1.9.tar.xz
+-rwxr-xr-x   1 root root      4077 2012-07-03 02:54 ./source/a/pciutils/pciutils.SlackBuild
+-rw-r--r--   1 root root       245 2012-07-03 02:27 ./source/a/pciutils/pciutils.dontcompress.diff.gz
+-rw-r--r--   1 root root       250 2012-07-03 02:46 ./source/a/pciutils/pciutils.update.pci.ids.url.diff.gz
+-rw-r--r--   1 root root       137 2012-02-14 01:11 ./source/a/pciutils/pciutils.url
+-rw-r--r--   1 root root       895 2006-12-19 23:55 ./source/a/pciutils/slack-desc
+drwxr-xr-x   3 root root      4096 2011-02-27 21:33 ./source/a/pcmciautils
+-rw-r--r--   1 root root      1429 2007-03-16 14:50 ./source/a/pcmciautils/cis-cs-3.2.8.tar.gz
+drwxr-xr-x   2 root root      4096 2008-09-12 04:35 ./source/a/pcmciautils/config
+-rw-r--r--   1 root root       926 2007-03-16 20:00 ./source/a/pcmciautils/config/60-pcmcia.rules
+-rw-r--r--   1 root root      2577 2008-03-05 03:14 ./source/a/pcmciautils/config/config.opts
+-rwxr-xr-x   1 root root      1722 2007-03-16 21:09 ./source/a/pcmciautils/config/rc.pcmcia
+-rw-r--r--   1 root root       277 2009-04-14 04:38 ./source/a/pcmciautils/doinst.sh.gz
+-rw-r--r--   1 root root     43721 2010-01-06 15:54 ./source/a/pcmciautils/pcmciautils-017.tar.bz2
+-rw-r--r--   1 root root       248 2010-01-06 15:54 ./source/a/pcmciautils/pcmciautils-017.tar.sign
+-rwxr-xr-x   1 root root      3871 2011-02-27 21:40 ./source/a/pcmciautils/pcmciautils.SlackBuild
+-rw-r--r--   1 root root       914 2009-04-14 04:35 ./source/a/pcmciautils/slack-desc
+drwxr-xr-x   5 root root      4096 2011-03-07 18:47 ./source/a/pkgtools
+drwxr-xr-x   2 root root      4096 2009-04-11 21:15 ./source/a/pkgtools/manpages
+-rw-r--r--   1 root root      1256 2009-04-11 20:54 ./source/a/pkgtools/manpages/explodepkg.8
+-rw-r--r--   1 root root      3065 2011-03-18 21:22 ./source/a/pkgtools/manpages/installpkg.8
+-rw-r--r--   1 root root      4557 2009-04-11 20:51 ./source/a/pkgtools/manpages/makepkg.8
+-rw-r--r--   1 root root      2518 2009-04-11 21:11 ./source/a/pkgtools/manpages/pkgtool.8
+-rw-r--r--   1 root root      3080 2009-04-11 21:15 ./source/a/pkgtools/manpages/removepkg.8
+-rw-r--r--   1 root root      3199 2001-06-07 08:29 ./source/a/pkgtools/manpages/setup.8-deprecated
+-rw-r--r--   1 root root      2665 2009-04-11 21:14 ./source/a/pkgtools/manpages/upgradepkg.8
+drwxr-xr-x   2 root root      4096 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts
+-rw-r--r--   1 root root       155 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts/README
+-rw-r--r--   1 root root      1326 2003-02-16 00:57 ./source/a/pkgtools/obsolete-scripts/setup.90.modem-device
+-rwxr-xr-x   1 root root      2501 2012-08-27 18:08 ./source/a/pkgtools/pkgtools.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-03-18 21:19 ./source/a/pkgtools/scripts
+-rw-r--r--   1 root root      3169 2010-05-11 16:38 ./source/a/pkgtools/scripts/explodepkg
+-rw-r--r--   1 root root     20490 2011-04-22 20:50 ./source/a/pkgtools/scripts/installpkg
+-rw-r--r--   1 root root     13749 2009-04-06 02:14 ./source/a/pkgtools/scripts/makebootdisk
+-rw-r--r--   1 root root     11315 2009-06-02 04:12 ./source/a/pkgtools/scripts/makepkg
+-rw-r--r--   1 root root     22664 2012-08-09 18:38 ./source/a/pkgtools/scripts/pkgtool
+-rw-r--r--   1 root root     14048 2009-04-28 20:44 ./source/a/pkgtools/scripts/removepkg
+-rw-r--r--   1 root root       170 2003-02-16 00:56 ./source/a/pkgtools/scripts/setup.70.install-kernel
+-rw-r--r--   1 root root      6356 2008-03-18 19:39 ./source/a/pkgtools/scripts/setup.80.make-bootdisk
+-rw-r--r--   1 root root      1070 2007-06-27 00:28 ./source/a/pkgtools/scripts/setup.htmlview
+-rw-r--r--   1 root root      7425 2012-08-27 18:08 ./source/a/pkgtools/scripts/setup.services
+-rw-r--r--   1 root root     12135 2010-05-11 16:41 ./source/a/pkgtools/scripts/upgradepkg
+-rw-r--r--   1 root root      1083 2002-03-23 04:15 ./source/a/pkgtools/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-29 18:34 ./source/a/procps
+-rw-r--r--   1 root root     24365 2001-03-02 18:54 ./source/a/procps/procinfo-18.tar.gz
+-rw-r--r--   1 root root       213 2003-02-07 21:39 ./source/a/procps/procinfo.gcc3.diff.gz
+-rw-r--r--   1 root root       504 2001-03-02 18:54 ./source/a/procps/procinfo.lsm
+-rw-r--r--   1 root root      1056 2011-03-28 16:20 ./source/a/procps/procps-3.2.7-ps-cgroup.patch.gz
+-rw-r--r--   1 root root       824 2008-09-19 19:04 ./source/a/procps/procps-3.2.7-ps-eip64.diff.gz
+-rw-r--r--   1 root root       513 2011-03-28 16:21 ./source/a/procps/procps-3.2.8-ps-cgroup-suppress-root-group.patch.gz
+-rw-r--r--   1 root root    217784 2009-05-10 19:45 ./source/a/procps/procps-3.2.8.tar.xz
+-rw-r--r--   1 root root       596 2011-03-29 18:34 ./source/a/procps/procps-3.2.8.unknown.hz.value.diff.gz
+-rwxr-xr-x   1 root root      6745 2011-03-29 18:38 ./source/a/procps/procps.SlackBuild
+-rw-r--r--   1 root root       854 2004-08-17 01:30 ./source/a/procps/procps.nowarning.diff.gz
+-rw-r--r--   1 root root       182 2003-02-02 19:47 ./source/a/procps/procps.w.showfrom.diff.gz
+-rw-r--r--   1 root root    245676 2010-09-06 03:31 ./source/a/procps/psmisc-22.13.tar.xz
+-rw-r--r--   1 root root       739 2004-05-27 21:01 ./source/a/procps/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-22 20:00 ./source/a/quota
+-rw-r--r--   1 root root    216356 2009-01-05 14:29 ./source/a/quota/quota-3.17.tar.xz
+-rwxr-xr-x   1 root root      3814 2010-07-28 04:02 ./source/a/quota/quota.SlackBuild
+-rw-r--r--   1 root root       980 2002-03-31 08:30 ./source/a/quota/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/reiserfsprogs
+-rw-r--r--   1 root root    324847 2009-01-12 22:13 ./source/a/reiserfsprogs/reiserfsprogs-3.6.21.tar.bz2
+-rwxr-xr-x   1 root root      3783 2010-07-28 04:03 ./source/a/reiserfsprogs/reiserfsprogs.SlackBuild
+-rw-r--r--   1 root root       940 2008-02-11 03:44 ./source/a/reiserfsprogs/slack-desc
+drwxr-xr-x   3 root root      4096 2010-04-30 22:39 ./source/a/rpm2tgz
+-rw-r--r--   1 root root      1809 2002-11-27 21:47 ./source/a/rpm2tgz/getrpmtype.tar.gz
+drwxr-xr-x   2 root root      4096 2010-08-07 22:43 ./source/a/rpm2tgz/patches
+-rw-r--r--   1 root root       567 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0001-fix-d-handling.patch.gz
+-rw-r--r--   1 root root       651 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz
+-rw-r--r--   1 root root       521 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch.gz
+-rw-r--r--   1 root root       707 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch.gz
+-rw-r--r--   1 root root       792 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch.gz
+-rw-r--r--   1 root root       755 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch.gz
+-rw-r--r--   1 root root       969 2010-08-07 22:43 ./source/a/rpm2tgz/patches/0007-Add-support-for-.txz-packages-and-rpm2txz-symlink.patch.gz
+-rw-r--r--   1 root root       674 2010-08-07 21:10 ./source/a/rpm2tgz/patches/0008-Avoid-none-values-in-slack-desc.patch.gz
+-rw-r--r--   1 root root      1057 2010-08-07 21:10 ./source/a/rpm2tgz/patches/0009-Add-c-option-just-as-makepkg-c-y.patch.gz
+-rw-r--r--   1 root root      7333 2010-02-18 02:37 ./source/a/rpm2tgz/rpm2targz
+-rw-r--r--   1 root root       986 2006-12-23 06:51 ./source/a/rpm2tgz/rpm2targz.README
+-rwxr-xr-x   1 root root      3821 2010-08-07 22:48 ./source/a/rpm2tgz/rpm2tgz.SlackBuild
+-rw-r--r--   1 root root       854 2010-02-23 21:02 ./source/a/rpm2tgz/rpmoffset.c
+-rw-r--r--   1 root root       856 2008-02-11 03:44 ./source/a/rpm2tgz/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/a/sdparm
+-rw-r--r--   1 root root    222800 2012-01-21 23:16 ./source/a/sdparm/sdparm-1.07.tar.xz
+-rwxr-xr-x   1 root root      3879 2012-06-25 22:55 ./source/a/sdparm/sdparm.SlackBuild
+-rw-r--r--   1 root root       924 2007-06-02 18:27 ./source/a/sdparm/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-06 02:13 ./source/a/sed
+-rw-r--r--   1 root root    728284 2009-06-29 06:39 ./source/a/sed/sed-4.2.1.tar.xz
+-rwxr-xr-x   1 root root      3342 2009-12-06 02:15 ./source/a/sed/sed.SlackBuild
+-rw-r--r--   1 root root       862 2009-05-30 01:41 ./source/a/sed/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-13 23:30 ./source/a/shadow
+-rw-r--r--   1 root root     15878 2012-09-13 23:27 ./source/a/shadow/adduser
+-rw-r--r--   1 root root       290 2010-01-28 01:29 ./source/a/shadow/doinst.sh.gz
+-rw-r--r--   1 root root      4606 2012-09-13 23:27 ./source/a/shadow/login.defs.gz
+drwxr-xr-x   3 root root      4096 2012-08-14 15:37 ./source/a/shadow/patches
+-rw-r--r--   1 root root       472 2012-08-14 15:36 ./source/a/shadow/patches/README_PATCHES
+-rw-r--r--   1 root root       365 2011-03-24 02:47 ./source/a/shadow/patches/r3054.diff.gz
+-rw-r--r--   1 root root      7828 2011-03-24 02:47 ./source/a/shadow/patches/r3055.diff.gz
+-rw-r--r--   1 root root       671 2011-03-24 02:47 ./source/a/shadow/patches/r3060.diff.gz
+-rw-r--r--   1 root root       888 2011-03-24 02:47 ./source/a/shadow/patches/r3062.diff.gz
+-rw-r--r--   1 root root       240 2012-08-14 15:38 ./source/a/shadow/patches/r3090.diff.gz
+-rw-r--r--   1 root root       314 2011-03-24 02:47 ./source/a/shadow/patches/r3096.diff.gz
+-rw-r--r--   1 root root      3291 2011-03-24 02:47 ./source/a/shadow/patches/r3160.diff.gz
+-rw-r--r--   1 root root       273 2011-03-24 02:47 ./source/a/shadow/patches/r3194.diff.gz
+drwxr-xr-x   2 root root      4096 2012-06-27 04:22 ./source/a/shadow/patches/unused
+-rw-r--r--   1 root root       173 2011-03-24 02:47 ./source/a/shadow/patches/unused/r3299.diff.gz
+-rw-r--r--   1 root root   1295904 2011-02-15 23:55 ./source/a/shadow/shadow-4.1.4.3.tar.xz
+-rwxr-xr-x   1 root root      5060 2012-09-13 23:27 ./source/a/shadow/shadow.SlackBuild
+-rw-r--r--   1 root root       296 2012-06-27 04:21 ./source/a/shadow/shadow.man.nodups.diff.gz
+-rw-r--r--   1 root root        50 2011-03-24 03:05 ./source/a/shadow/shadow.url
+-rw-r--r--   1 root root       993 2002-04-30 23:51 ./source/a/shadow/slack-desc
+-rw-r--r--   1 root root       142 2010-02-28 20:14 ./source/a/shadow/useradd.gz
+drwxr-xr-x   2 root root      4096 2011-02-07 19:16 ./source/a/sharutils
+-rw-r--r--   1 root root    761964 2011-02-05 19:34 ./source/a/sharutils/sharutils-4.11.tar.xz
+-rwxr-xr-x   1 root root      3543 2011-02-07 19:28 ./source/a/sharutils/sharutils.SlackBuild
+-rw-r--r--   1 root root      1087 2006-05-19 01:57 ./source/a/sharutils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-30 18:56 ./source/a/slocate
+-rw-r--r--   1 root root       941 2009-07-18 00:05 ./source/a/slocate/_slocate.tar.gz
+-rw-r--r--   1 root root      1011 2002-04-07 09:50 ./source/a/slocate/slack-desc
+-rw-r--r--   1 root root     37748 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz
+-rw-r--r--   1 root root       189 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz.sign
+-rw-r--r--   1 root root       561 2012-08-30 17:33 ./source/a/slocate/slocate.CVE-2007-0277.diff.gz
+-rwxr-xr-x   1 root root      2903 2012-08-30 18:56 ./source/a/slocate/slocate.SlackBuild
+-rw-r--r--   1 root root       485 2012-08-30 17:33 ./source/a/slocate/slocate.bigfile.diff.gz
+drwxr-xr-x   2 root root      4096 2012-08-10 19:48 ./source/a/smartmontools
+-rw-r--r--   1 root root       270 2004-04-12 02:03 ./source/a/smartmontools/doinst.sh.gz
+-rw-r--r--   1 root root      1174 2002-10-21 22:55 ./source/a/smartmontools/slack-desc
+-rw-r--r--   1 root root    570964 2012-06-30 14:30 ./source/a/smartmontools/smartmontools-5.43.tar.xz
+-rwxr-xr-x   1 root root      3187 2011-01-27 19:24 ./source/a/smartmontools/smartmontools.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/splitvt
+-rw-r--r--   1 root root       743 2006-12-13 23:26 ./source/a/splitvt/slack-desc
+-rw-r--r--   1 root root     64301 2001-01-18 07:58 ./source/a/splitvt/splitvt-1.6.5.tar.gz
+-rwxr-xr-x   1 root root      2556 2010-07-28 04:10 ./source/a/splitvt/splitvt.SlackBuild
+-rw-r--r--   1 root root     10403 2005-07-19 22:17 ./source/a/splitvt/splitvt_1.6.5-9.diff.gz
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/sysfsutils
+-rw-r--r--   1 root root      1005 2006-08-03 23:45 ./source/a/sysfsutils/slack-desc
+-rw-r--r--   1 root root    288189 2006-12-12 01:33 ./source/a/sysfsutils/sysfsutils-2.1.0.tar.bz2
+-rwxr-xr-x   1 root root      3470 2010-07-28 04:11 ./source/a/sysfsutils/sysfsutils.SlackBuild
+drwxr-xr-x   3 root root      4096 2010-10-14 18:47 ./source/a/sysklogd
+drwxr-xr-x   2 root root      4096 2010-10-14 16:20 ./source/a/sysklogd/config
+-rw-r--r--   1 root root       981 2007-04-09 23:10 ./source/a/sysklogd/config/rc.syslog.new
+-rw-r--r--   1 root root      1573 2003-03-14 22:32 ./source/a/sysklogd/config/syslog.conf.new
+-rw-r--r--   1 root root       239 2003-06-08 02:49 ./source/a/sysklogd/config/syslog.logrotate
+-rw-r--r--   1 root root       380 2010-10-14 16:17 ./source/a/sysklogd/doinst.sh.gz
+-rw-r--r--   1 root root       916 2002-03-23 22:05 ./source/a/sysklogd/slack-desc
+-rw-r--r--   1 root root     86557 2007-07-29 14:26 ./source/a/sysklogd/sysklogd-1.5.tar.gz
+-rwxr-xr-x   1 root root      3423 2010-10-14 18:22 ./source/a/sysklogd/sysklogd.SlackBuild
+-rw-r--r--   1 root root       382 2010-10-14 18:21 ./source/a/sysklogd/use_memmove_not_strcpy.diff.gz
+drwxr-xr-x   2 root root      4096 2012-08-17 22:10 ./source/a/syslinux
+-rw-r--r--   1 root root       977 2002-03-22 08:06 ./source/a/syslinux/slack-desc
+-rw-r--r--   1 root root       836 2011-12-09 19:44 ./source/a/syslinux/syslinux-4.05.tar.sign
+-rw-r--r--   1 root root   4486428 2011-12-09 19:44 ./source/a/syslinux/syslinux-4.05.tar.xz
+-rwxr-xr-x   1 root root      3174 2012-08-17 22:11 ./source/a/syslinux/syslinux.SlackBuild
+-rw-r--r--   1 root root       195 2012-08-17 22:10 ./source/a/syslinux/syslinux.altmbr.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-31 16:44 ./source/a/sysvinit
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/sysvinit-functions
+-rw-r--r--   1 root root       832 2007-04-29 18:51 ./source/a/sysvinit-functions/README.functions
+-rw-r--r--   1 root root       226 2007-05-15 02:38 ./source/a/sysvinit-functions/doinst.sh.gz
+-rw-r--r--   1 root root     10001 2007-04-29 18:21 ./source/a/sysvinit-functions/function-src-8.53.tar.bz2
+-rw-r--r--   1 root root     13913 2006-10-26 20:57 ./source/a/sysvinit-functions/functions
+-rw-r--r--   1 root root      1164 2007-05-15 02:46 ./source/a/sysvinit-functions/slack-desc
+-rwxr-xr-x   1 root root      3323 2010-07-28 04:13 ./source/a/sysvinit-functions/sysvinit-functions.SlackBuild
+drwxr-xr-x   3 root root      4096 2011-04-23 19:57 ./source/a/sysvinit-scripts
+-rw-r--r--   1 root root       342 2011-04-23 19:41 ./source/a/sysvinit-scripts/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2012-09-10 19:06 ./source/a/sysvinit-scripts/scripts
+-rw-r--r--   1 root root        60 2006-08-01 03:00 ./source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh
+-rw-r--r--   1 root root      2354 2012-07-16 18:35 ./source/a/sysvinit-scripts/scripts/inittab
+-rw-r--r--   1 root root      1282 2007-03-27 01:12 ./source/a/sysvinit-scripts/scripts/rc.4
+-rw-r--r--   1 root root      7695 2012-08-14 23:03 ./source/a/sysvinit-scripts/scripts/rc.6
+-rw-r--r--   1 root root      2893 2011-04-16 21:14 ./source/a/sysvinit-scripts/scripts/rc.K
+-rw-r--r--   1 root root     11723 2012-09-25 17:47 ./source/a/sysvinit-scripts/scripts/rc.M
+-rw-r--r--   1 root root     14210 2012-09-13 19:38 ./source/a/sysvinit-scripts/scripts/rc.S
+-rw-r--r--   1 root root       272 2006-08-12 02:07 ./source/a/sysvinit-scripts/scripts/rc.local
+-rw-r--r--   1 root root       168 2011-04-23 19:40 ./source/a/sysvinit-scripts/scripts/rc.loop
+-rw-r--r--   1 root root      1740 1999-09-11 20:48 ./source/a/sysvinit-scripts/scripts/rc.sysvinit
+-rw-r--r--   1 root root     22473 2012-09-07 17:51 ./source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
+-rw-r--r--   1 root root       645 2012-09-07 17:52 ./source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh.diff
+-rw-r--r--   1 root root       846 2007-05-15 02:47 ./source/a/sysvinit-scripts/slack-desc
+-rwxr-xr-x   1 root root      2185 2012-09-25 17:47 ./source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
+-rw-r--r--   1 root root       681 2007-04-16 19:42 ./source/a/sysvinit/doinst.sh.gz
+-rw-r--r--   1 root root       972 2002-03-22 05:59 ./source/a/sysvinit/slack-desc
+-rw-r--r--   1 root root    105184 2010-04-14 07:14 ./source/a/sysvinit/sysvinit-2.88dsf.tar.xz
+-rwxr-xr-x   1 root root      3751 2012-07-31 16:45 ./source/a/sysvinit/sysvinit.SlackBuild
+-rw-r--r--   1 root root       367 2012-07-31 16:44 ./source/a/sysvinit/sysvinit.paths.diff.gz
+drwxr-xr-x   2 root root      4096 2011-03-12 17:59 ./source/a/tar
+-rw-r--r--   1 root root      2429 1995-01-07 08:18 ./source/a/tar/rmt.8.gz
+-rw-r--r--   1 root root       834 2002-03-23 22:06 ./source/a/tar/slack-desc
+-rw-r--r--   1 root root       949 2006-11-30 21:52 ./source/a/tar/tar-1.13.bzip2.diff.gz
+-rw-r--r--   1 root root   1052531 1999-07-08 05:50 ./source/a/tar/tar-1.13.tar.gz
+-rw-r--r--   1 root root   1783904 2011-03-12 10:50 ./source/a/tar/tar-1.26.tar.xz
+-rw-r--r--   1 root root       189 2011-03-12 10:50 ./source/a/tar/tar-1.26.tar.xz.sig
+-rw-r--r--   1 root root       230 2010-03-16 05:10 ./source/a/tar/tar-1.2x.support_txz.diff.gz
+-rw-r--r--   1 root root      2682 2010-10-27 02:22 ./source/a/tar/tar.1.gz
+-rwxr-xr-x   1 root root      4848 2011-04-14 18:21 ./source/a/tar/tar.SlackBuild
+-rw-r--r--   1 root root       509 2010-11-08 19:42 ./source/a/tar/tar.nolonezero.diff.gz
+-rw-r--r--   1 root root       377 2010-03-16 04:47 ./source/a/tar/tar.norecordsizespam.diff.gz
+drwxr-xr-x   2 root root      4096 2012-04-30 18:52 ./source/a/tcsh
+-rw-r--r--   1 root root       146 1995-08-06 23:12 ./source/a/tcsh/doinst.sh.gz
+-rw-r--r--   1 root root       886 2002-03-23 22:06 ./source/a/tcsh/slack-desc
+-rw-r--r--   1 root root    698240 2012-02-13 16:34 ./source/a/tcsh/tcsh-6.18.01.tar.xz
+-rwxr-xr-x   1 root root      3284 2012-04-30 18:52 ./source/a/tcsh/tcsh.SlackBuild
+-rw-r--r--   1 root root       202 2006-02-09 20:33 ./source/a/tcsh/tcsh.nobuiltincolorls.diff.gz
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/time
+-rw-r--r--   1 root root       887 2008-02-11 03:44 ./source/a/time/slack-desc
+-rw-r--r--   1 root root    103066 1996-07-11 15:08 ./source/a/time/time-1.7.tar.gz
+-rwxr-xr-x   1 root root      2538 2010-07-28 04:20 ./source/a/time/time.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-05-02 17:50 ./source/a/tree
+-rw-r--r--   1 root root       873 2006-12-23 06:19 ./source/a/tree/slack-desc
+-rw-r--r--   1 root root     39434 2011-06-24 14:36 ./source/a/tree/tree-1.6.0.tar.bz2
+-rwxr-xr-x   1 root root      2625 2012-05-02 17:52 ./source/a/tree/tree.SlackBuild
+drwxr-xr-x   3 root root      4096 2012-09-10 18:37 ./source/a/udev
+drwxr-xr-x   5 root root      4096 2012-01-21 15:54 ./source/a/udev/config
+drwxr-xr-x   2 root root      4096 2012-07-08 16:59 ./source/a/udev/config/modprobe.d
+-rw-r--r--   1 root root       332 2011-08-21 04:57 ./source/a/udev/config/modprobe.d/8139cp.conf
+-rw-r--r--   1 root root       511 2012-07-08 16:59 ./source/a/udev/config/modprobe.d/README
+-rw-r--r--   1 root root       283 2011-08-21 04:58 ./source/a/udev/config/modprobe.d/bcm43xx.conf
+-rw-r--r--   1 root root       383 2011-08-21 04:57 ./source/a/udev/config/modprobe.d/eepro100.conf
+-rw-r--r--   1 root root       386 2011-08-21 04:59 ./source/a/udev/config/modprobe.d/eth1394.conf
+-rw-r--r--   1 root root       307 2011-08-21 04:56 ./source/a/udev/config/modprobe.d/evbug.conf
+-rw-r--r--   1 root root      1239 2012-04-29 17:29 ./source/a/udev/config/modprobe.d/framebuffers.conf
+-rw-r--r--   1 root root       469 2011-08-21 04:59 ./source/a/udev/config/modprobe.d/hostap.conf
+-rw-r--r--   1 root root       327 2011-08-21 04:59 ./source/a/udev/config/modprobe.d/hw_random.conf
+-rw-r--r--   1 root root       875 2012-08-16 20:01 ./source/a/udev/config/modprobe.d/isapnp.conf
+-rw-r--r--   1 root root       389 2012-04-29 17:29 ./source/a/udev/config/modprobe.d/isdn.conf
+-rw-r--r--   1 root root      1403 2011-08-21 05:00 ./source/a/udev/config/modprobe.d/oss.conf
+-rw-r--r--   1 root root       401 2011-08-21 04:53 ./source/a/udev/config/modprobe.d/pcspkr.conf
+-rw-r--r--   1 root root       500 2011-08-21 04:54 ./source/a/udev/config/modprobe.d/psmouse.conf
+-rw-r--r--   1 root root      1727 2011-08-21 05:01 ./source/a/udev/config/modprobe.d/scsi-sata-controllers.conf
+-rw-r--r--   1 root root       451 2011-08-21 04:59 ./source/a/udev/config/modprobe.d/sound-modems.conf
+-rw-r--r--   1 root root       420 2011-08-21 04:56 ./source/a/udev/config/modprobe.d/tulip.conf
+-rw-r--r--   1 root root       453 2011-08-21 04:54 ./source/a/udev/config/modprobe.d/usb-controller.conf
+-rw-r--r--   1 root root       324 2011-08-21 04:59 ./source/a/udev/config/modprobe.d/via-ircc.conf
+-rw-r--r--   1 root root      1117 2012-07-08 16:40 ./source/a/udev/config/modprobe.d/watchdog.conf
+drwxr-xr-x   2 root root      4096 2012-07-21 05:44 ./source/a/udev/config/rc.d
+-rw-r--r--   1 root root      5882 2012-07-25 00:58 ./source/a/udev/config/rc.d/rc.udev.new
+drwxr-xr-x   2 root root      4096 2012-01-21 15:55 ./source/a/udev/config/rules.d
+-rw-r--r--   1 root root       659 2011-12-11 02:09 ./source/a/udev/config/rules.d/40-slackware.rules
+-rw-r--r--   1 root root      1847 2010-04-20 15:28 ./source/a/udev/config/rules.d/59-non-libata-devices.rules
+-rw-r--r--   1 root root      1380 2010-04-20 15:25 ./source/a/udev/config/rules.d/65-permissions.rules
+-rw-r--r--   1 root root       489 2010-11-06 03:46 ./source/a/udev/config/udev.conf
+-rw-r--r--   1 root root       541 2012-07-15 01:01 ./source/a/udev/doinst.sh.gz
+-rw-r--r--   1 root root       461 2012-09-10 18:37 ./source/a/udev/fix-42-usb-hid-pm.rules.diff.gz
+-rw-r--r--   1 root root       814 2012-03-25 04:00 ./source/a/udev/rule_generator.diff.gz
+-rw-r--r--   1 root root       825 2009-05-30 01:25 ./source/a/udev/slack-desc
+-rw-r--r--   1 root root    689232 2012-03-18 19:14 ./source/a/udev/udev-182.tar.xz
+-rw-r--r--   1 root root       674 2012-07-15 00:50 ./source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz
+-rw-r--r--   1 root root       381 2010-05-29 02:42 ./source/a/udev/udev-fixed-devices.tar.gz
+-rwxr-xr-x   1 root root      5169 2012-09-10 18:37 ./source/a/udev/udev.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-12-15 18:21 ./source/a/udisks
+-rw-r--r--   1 root root       870 2012-04-08 20:48 ./source/a/udisks/slack-desc
+-rw-r--r--   1 root root    449336 2011-12-15 18:21 ./source/a/udisks/udisks-1.0.4.tar.xz
+-rwxr-xr-x   1 root root      3701 2012-04-08 18:24 ./source/a/udisks/udisks.SlackBuild
+-rw-r--r--   1 root root        37 2010-11-10 05:15 ./source/a/udisks/udisks.url
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/a/udisks2
+-rw-r--r--   1 root root       386 2012-07-19 03:58 ./source/a/udisks2/doinst.sh.gz
+-rw-r--r--   1 root root       886 2012-05-29 19:19 ./source/a/udisks2/slack-desc
+-rw-r--r--   1 root root    531844 2012-06-07 18:39 ./source/a/udisks2/udisks-1.98.0.tar.xz
+-rwxr-xr-x   1 root root      4214 2012-07-19 03:59 ./source/a/udisks2/udisks2.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/unarj
+-rw-r--r--   1 root root       269 2006-12-23 05:36 ./source/a/unarj/Makefile.gz
+-rw-r--r--   1 root root       848 2006-12-23 05:29 ./source/a/unarj/slack-desc
+-rwxr-xr-x   1 root root      2268 2010-07-28 04:23 ./source/a/unarj/unarj.SlackBuild
+-rw-r--r--   1 root root     23151 2002-06-05 05:00 ./source/a/unarj/unarj265.tar.gz
+drwxr-xr-x   2 root root      4096 2012-06-26 03:12 ./source/a/upower
+-rw-r--r--   1 root root       270 2010-07-08 05:21 ./source/a/upower/doinst.sh.gz
+-rw-r--r--   1 root root       951 2012-04-08 20:48 ./source/a/upower/slack-desc
+-rw-r--r--   1 root root    402336 2012-06-25 10:19 ./source/a/upower/upower-0.9.17.tar.xz
+-rwxr-xr-x   1 root root      3804 2012-04-08 18:26 ./source/a/upower/upower.SlackBuild
+-rw-r--r--   1 root root        40 2010-11-10 05:19 ./source/a/upower/upower.url
+drwxr-xr-x   2 root root      4096 2012-08-13 15:58 ./source/a/usb_modeswitch
+-rw-r--r--   1 root root     12926 2012-08-12 16:40 ./source/a/usb_modeswitch/device_reference.txt.gz
+-rw-r--r--   1 root root       272 2010-04-30 04:03 ./source/a/usb_modeswitch/doinst.sh.gz
+-rw-r--r--   1 root root      1185 2010-04-30 03:24 ./source/a/usb_modeswitch/slack-desc
+-rw-r--r--   1 root root    257814 2012-08-12 16:21 ./source/a/usb_modeswitch/usb-modeswitch-1.2.4.tar.bz2
+-rw-r--r--   1 root root     20779 2012-08-12 16:29 ./source/a/usb_modeswitch/usb-modeswitch-data-20120812.tar.bz2
+-rwxr-xr-x   1 root root      4897 2012-08-29 17:18 ./source/a/usb_modeswitch/usb_modeswitch.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-07 21:37 ./source/a/usbutils
+-rw-r--r--   1 root root       781 2009-05-30 01:47 ./source/a/usbutils/slack-desc
+-rw-r--r--   1 root root    408420 2012-07-06 20:31 ./source/a/usbutils/usbutils-006.tar.xz
+-rwxr-xr-x   1 root root      4732 2012-07-07 21:33 ./source/a/usbutils/usbutils.SlackBuild
+-rw-r--r--   1 root root        52 2012-07-07 21:37 ./source/a/usbutils/usbutils.url
+drwxr-xr-x   2 root root      4096 2010-07-28 04:26 ./source/a/utempter
+-rw-r--r--   1 root root       230 2006-12-12 23:47 ./source/a/utempter/doinst.sh.gz
+-rw-r--r--   1 root root     14588 2007-02-19 12:14 ./source/a/utempter/libutempter-1.1.5.tar.bz2
+-rw-r--r--   1 root root       189 2007-02-19 12:14 ./source/a/utempter/libutempter-1.1.5.tar.bz2.asc
+-rw-r--r--   1 root root       809 2003-06-08 01:36 ./source/a/utempter/slack-desc
+-rwxr-xr-x   1 root root      3118 2010-07-28 04:26 ./source/a/utempter/utempter.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-14 18:40 ./source/a/util-linux
+-rw-r--r--   1 root root      1043 2012-08-02 17:05 ./source/a/util-linux/0001-mount-old-fix-encryption-usage.patch.gz
+-rw-r--r--   1 root root       429 2012-08-02 17:01 ./source/a/util-linux/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch.gz
+-rw-r--r--   1 root root     53236 2011-07-12 20:47 ./source/a/util-linux/adjtimex_1.29-2.2.diff.gz
+-rw-r--r--   1 root root     85551 2010-04-17 03:32 ./source/a/util-linux/adjtimex_1.29.orig.tar.gz
+-rw-r--r--   1 root root      4513 2009-05-30 01:25 ./source/a/util-linux/bsdstrings.tar.gz
+-rw-r--r--   1 root root       279 2012-08-14 18:40 ./source/a/util-linux/column-fix_long_opts.diff.gz
+-rw-r--r--   1 root root       337 2009-05-30 01:25 ./source/a/util-linux/doinst.sh.gz
+-rw-r--r--   1 root root    195768 2012-07-26 20:46 ./source/a/util-linux/net-tools-1.60.20120726git.tar.xz
+-rw-r--r--   1 root root       629 2012-07-26 20:54 ./source/a/util-linux/net-tools.config.h.gz
+-rw-r--r--   1 root root      1266 2009-05-30 01:25 ./source/a/util-linux/scsi_ioctl.h
+-rw-r--r--   1 root root     52437 2009-05-30 01:25 ./source/a/util-linux/setserial-2.17.tar.gz
+-rw-r--r--   1 root root       729 2009-05-30 01:25 ./source/a/util-linux/setserial-rc.serial.diff.gz
+-rw-r--r--   1 root root       376 2010-03-30 04:06 ./source/a/util-linux/setserial-undef_TIOCGHAYESESP.diff.gz
+-rw-r--r--   1 root root       784 2011-02-16 06:11 ./source/a/util-linux/slack-desc
+-rw-r--r--   1 root root   2985668 2012-05-25 11:10 ./source/a/util-linux/util-linux-2.21.2.tar.xz
+-rwxr-xr-x   1 root root      9852 2012-08-14 18:41 ./source/a/util-linux/util-linux.SlackBuild
+-rw-r--r--   1 root root       299 2009-05-30 01:25 ./source/a/util-linux/util-linux.fdisk-no-solaris.diff.gz
+-rw-r--r--   1 root root     10292 2009-05-30 01:25 ./source/a/util-linux/ziptool-1.4.0.tar.xz
+-rw-r--r--   1 root root       386 2009-05-30 01:25 ./source/a/util-linux/ziptool-fix_build.patch.gz
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/a/which
+-rw-r--r--   1 root root      1038 2006-12-14 02:00 ./source/a/which/slack-desc
+-rw-r--r--   1 root root    135372 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz
+-rw-r--r--   1 root root       152 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz.sig
+-rwxr-xr-x   1 root root      3081 2010-07-28 04:27 ./source/a/which/which.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/a/xfsprogs
+-rw-r--r--   1 root root       954 2006-02-21 05:35 ./source/a/xfsprogs/slack-desc
+-rw-r--r--   1 root root    949916 2012-03-22 17:10 ./source/a/xfsprogs/xfsprogs-3.1.8.tar.xz
+-rwxr-xr-x   1 root root      4536 2012-06-25 22:55 ./source/a/xfsprogs/xfsprogs.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-26 21:05 ./source/a/xz
+-rw-r--r--   1 root root       951 2012-07-22 16:51 ./source/a/xz/slack-desc
+-rw-r--r--   1 root root   1048328 2012-06-22 16:01 ./source/a/xz/xz-5.0.4.tar.bz2
+-rw-r--r--   1 root root       543 2012-06-22 16:01 ./source/a/xz/xz-5.0.4.tar.bz2.sig
+-rwxr-xr-x   1 root root      5006 2012-06-26 22:20 ./source/a/xz/xz.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-07-28 04:35 ./source/a/zoo
+-rw-r--r--   1 root root       996 2006-12-14 01:08 ./source/a/zoo/slack-desc
+-rw-r--r--   1 root root    173607 1994-12-30 20:19 ./source/a/zoo/zoo-2.10.tar.gz
+-rwxr-xr-x   1 root root      2802 2010-07-28 04:37 ./source/a/zoo/zoo.SlackBuild
+-rw-r--r--   1 root root     14136 2010-05-22 09:49 ./source/a/zoo/zoo_2.10-22.debian.tar.gz
+drwxr-xr-x  74 root root      4096 2012-09-09 17:03 ./source/ap
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/ap/a2ps
+-rw-r--r--   1 root root   1814364 2007-12-29 03:53 ./source/ap/a2ps/a2ps-4.14.tar.bz2
+-rwxr-xr-x   1 root root      5426 2010-07-28 17:23 ./source/ap/a2ps/a2ps.SlackBuild
+-rw-r--r--   1 root root       298 2009-03-31 01:11 ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff.gz
+-rw-r--r--   1 root root       249 2001-01-19 05:15 ./source/ap/a2ps/a2ps.diff.gz
+-rw-r--r--   1 root root     62039 1997-08-28 13:11 ./source/ap/a2ps/psutils-1.17.tar.gz
+-rw-r--r--   1 root root       574 2009-03-04 01:22 ./source/ap/a2ps/psutils.destdir.diff.gz
+-rw-r--r--   1 root root       471 2001-01-19 04:54 ./source/ap/a2ps/psutils.diff.gz
+-rw-r--r--   1 root root       900 2002-03-29 03:05 ./source/ap/a2ps/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 17:40 ./source/ap/acct
+-rw-r--r--   1 root root    448772 2010-04-27 17:32 ./source/ap/acct/acct-6.5.4.tar.xz
+-rwxr-xr-x   1 root root      4580 2010-07-28 17:37 ./source/ap/acct/acct.SlackBuild
+-rw-r--r--   1 root root       320 2010-07-28 17:35 ./source/ap/acct/acct.logdir.fhs.diff.gz
+-rw-r--r--   1 root root      1054 2008-11-12 20:20 ./source/ap/acct/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-10 22:10 ./source/ap/alsa-utils
+-rw-r--r--   1 root root   1061928 2012-09-06 08:58 ./source/ap/alsa-utils/alsa-utils-1.0.26.tar.xz
+-rwxr-xr-x   1 root root      4100 2012-09-10 22:11 ./source/ap/alsa-utils/alsa-utils.SlackBuild
+-rw-r--r--   1 root root       989 2010-05-30 02:08 ./source/ap/alsa-utils/alsa-utils.alsaconf.diff.gz
+-rw-r--r--   1 root root       178 2011-02-09 05:53 ./source/ap/alsa-utils/doinst.sh.gz
+-rw-r--r--   1 root root      1109 2011-02-09 05:46 ./source/ap/alsa-utils/rc.alsa.gz
+-rw-r--r--   1 root root      1086 2003-08-29 06:09 ./source/ap/alsa-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/amp
+-rw-r--r--   1 root root       236 2002-02-24 19:46 ./source/ap/amp/_amp.tar.gz
+-rw-r--r--   1 root root    100337 1999-03-17 18:11 ./source/ap/amp/amp-0.7.6.tar.gz
+-rw-r--r--   1 root root       239 2008-10-01 07:38 ./source/ap/amp/amp-gcc34.diff.gz
+-rwxr-xr-x   1 root root      2279 2010-07-28 17:44 ./source/ap/amp/amp.SlackBuild
+-rw-r--r--   1 root root      1514 1999-03-17 18:33 ./source/ap/amp/license_excerpts
+-rw-r--r--   1 root root       729 2002-03-29 01:09 ./source/ap/amp/slack-desc
+drwxr-xr-x   3 root root      4096 2010-04-25 21:36 ./source/ap/ash
+-rw-r--r--   1 root root    121233 2001-01-12 16:50 ./source/ap/ash/ash-0.4.0.tar.gz
+-rwxr-xr-x   1 root root      3066 2010-04-25 21:36 ./source/ap/ash/ash.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-04-25 21:34 ./source/ap/ash/patches
+-rw-r--r--   1 root root      6275 2002-06-02 18:57 ./source/ap/ash/patches/ash-builtin.patch.gz
+-rw-r--r--   1 root root      6506 2002-06-02 18:57 ./source/ap/ash/patches/ash-debian.patch.gz
+-rw-r--r--   1 root root       832 2002-06-02 18:57 ./source/ap/ash/patches/ash-echo.patch.gz
+-rw-r--r--   1 root root       707 2002-06-02 18:57 ./source/ap/ash/patches/ash-freebsd.patch.gz
+-rw-r--r--   1 root root       312 2002-06-02 18:57 ./source/ap/ash/patches/ash-getcwd.patch.gz
+-rw-r--r--   1 root root      1585 2002-06-02 18:57 ./source/ap/ash/patches/ash-getopt.patch.gz
+-rw-r--r--   1 root root      2937 2002-06-02 18:57 ./source/ap/ash/patches/ash-glob.patch.gz
+-rw-r--r--   1 root root      4556 2010-04-25 21:34 ./source/ap/ash/patches/ash-hetio.patch.gz
+-rw-r--r--   1 root root      1004 2002-06-02 18:57 ./source/ap/ash/patches/ash-jobs.patch.gz
+-rw-r--r--   1 root root      5625 2002-06-02 18:57 ./source/ap/ash/patches/ash-kill.patch.gz
+-rw-r--r--   1 root root      1338 2002-06-02 18:57 ./source/ap/ash/patches/ash-makefile.patch.gz
+-rw-r--r--   1 root root       718 2002-06-02 18:57 ./source/ap/ash/patches/ash-manpage.patch.gz
+-rw-r--r--   1 root root      2357 2002-06-02 18:57 ./source/ap/ash/patches/ash-memout.patch.gz
+-rw-r--r--   1 root root      1499 2002-06-02 18:57 ./source/ap/ash/patches/ash-misc.patch.gz
+-rw-r--r--   1 root root       388 2002-06-02 18:57 ./source/ap/ash/patches/ash-ppid.patch.gz
+-rw-r--r--   1 root root      3928 2002-06-02 18:57 ./source/ap/ash/patches/ash-redir.patch.gz
+-rw-r--r--   1 root root      4570 2002-06-02 18:57 ./source/ap/ash/patches/ash-setmode.patch.gz
+-rw-r--r--   1 root root       261 2002-06-02 18:57 ./source/ap/ash/patches/ash-sighup.patch.gz
+-rw-r--r--   1 root root      2215 2002-06-02 18:57 ./source/ap/ash/patches/ash-syntax.patch.gz
+-rw-r--r--   1 root root      3668 2002-06-02 18:57 ./source/ap/ash/patches/ash-test.patch.gz
+-rw-r--r--   1 root root       585 2002-06-02 18:57 ./source/ap/ash/patches/ash-times.patch.gz
+-rw-r--r--   1 root root       979 2002-06-02 19:04 ./source/ap/ash/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 17:45 ./source/ap/at
+-rw-r--r--   1 root root     98664 2009-11-30 15:32 ./source/ap/at/at-3.1.12.tar.xz
+-rwxr-xr-x   1 root root      3362 2010-07-28 17:49 ./source/ap/at/at.SlackBuild
+-rw-r--r--   1 root root       414 2006-08-03 00:45 ./source/ap/at/doinst.sh.gz
+-rw-r--r--   1 root root       737 2003-11-23 18:46 ./source/ap/at/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 17:51 ./source/ap/aumix
+-rw-r--r--   1 root root    194652 2010-05-09 05:32 ./source/ap/aumix/aumix-2.9.1.tar.xz
+-rwxr-xr-x   1 root root      2561 2010-07-28 17:54 ./source/ap/aumix/aumix.SlackBuild
+-rw-r--r--   1 root root       764 2002-06-05 04:41 ./source/ap/aumix/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/ap/bc
+-rw-r--r--   1 root root    290069 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2
+-rw-r--r--   1 root root       184 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2.sig
+-rwxr-xr-x   1 root root      3568 2010-07-28 17:56 ./source/ap/bc/bc.SlackBuild
+-rw-r--r--   1 root root       839 2002-05-13 17:58 ./source/ap/bc/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/ap/bpe
+-rw-r--r--   1 root root    115498 2001-01-02 06:38 ./source/ap/bpe/bpe-2.01.00.tar.gz
+-rwxr-xr-x   1 root root      2498 2010-07-28 17:57 ./source/ap/bpe/bpe.SlackBuild
+-rw-r--r--   1 root root       789 2004-06-06 22:28 ./source/ap/bpe/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/cdparanoia
+-rw-r--r--   1 root root    183236 2008-09-11 21:36 ./source/ap/cdparanoia/cdparanoia-III-10.2.src.tar.gz
+-rw-r--r--   1 root root      3327 2008-10-19 15:49 ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch.gz
+-rwxr-xr-x   1 root root      4199 2010-07-28 17:58 ./source/ap/cdparanoia/cdparanoia.SlackBuild
+-rw-r--r--   1 root root      1056 2007-11-17 04:37 ./source/ap/cdparanoia/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-07 02:19 ./source/ap/cdrdao
+-rw-r--r--   1 root root       214 2012-02-29 00:39 ./source/ap/cdrdao/cdrdao-1.2.3-stat.patch.gz
+-rw-r--r--   1 root root   1180112 2010-07-11 15:47 ./source/ap/cdrdao/cdrdao-1.2.3.tar.xz
+-rwxr-xr-x   1 root root      2939 2012-07-07 02:20 ./source/ap/cdrdao/cdrdao.SlackBuild
+-rw-r--r--   1 root root       753 2002-03-23 22:15 ./source/ap/cdrdao/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-17 22:43 ./source/ap/cdrtools
+-rw-r--r--   1 root root   1705264 2012-08-15 09:48 ./source/ap/cdrtools/cdrtools-3.01a08.tar.xz
+-rwxr-xr-x   1 root root      5526 2010-12-22 00:53 ./source/ap/cdrtools/cdrtools.SlackBuild
+-rw-r--r--   1 root root       269 2009-12-29 03:13 ./source/ap/cdrtools/doinst.sh.gz
+-rw-r--r--   1 root root       868 2008-02-11 03:44 ./source/ap/cdrtools/slack-desc
+-rw-r--r--   1 root root     52968 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2
+-rw-r--r--   1 root root       248 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2.sign
+drwxr-xr-x   2 root root      4096 2010-07-28 18:01 ./source/ap/dc3dd
+-rw-r--r--   1 root root   2138588 2009-03-19 19:59 ./source/ap/dc3dd/dc3dd-6.12.3.tar.xz
+-rwxr-xr-x   1 root root      3338 2010-07-28 18:00 ./source/ap/dc3dd/dc3dd.SlackBuild
+-rw-r--r--   1 root root       913 2009-02-14 22:30 ./source/ap/dc3dd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-12 04:17 ./source/ap/ddrescue
+-rw-r--r--   1 root root     61768 2012-06-11 18:18 ./source/ap/ddrescue/ddrescue-1.16.tar.xz
+-rwxr-xr-x   1 root root      3940 2011-02-25 20:33 ./source/ap/ddrescue/ddrescue.SlackBuild
+-rw-r--r--   1 root root       924 2011-02-25 20:34 ./source/ap/ddrescue/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 18:02 ./source/ap/diffstat
+-rw-r--r--   1 root root    165236 2010-07-19 09:57 ./source/ap/diffstat/diffstat-1.53.tar.xz
+-rwxr-xr-x   1 root root      3410 2010-07-28 18:03 ./source/ap/diffstat/diffstat.SlackBuild
+-rw-r--r--   1 root root       868 2006-09-20 05:07 ./source/ap/diffstat/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/ap/diffutils
+-rw-r--r--   1 root root   1164584 2011-09-02 15:27 ./source/ap/diffutils/diffutils-3.2.tar.xz
+-rw-r--r--   1 root root       373 2010-02-14 08:28 ./source/ap/diffutils/diffutils-sdiff-no-waitpid.patch.gz
+-rwxr-xr-x   1 root root      3884 2012-06-25 23:34 ./source/ap/diffutils/diffutils.SlackBuild
+-rw-r--r--   1 root root       321 2006-08-21 02:46 ./source/ap/diffutils/doinst.sh.gz
+-rw-r--r--   1 root root       743 2002-03-23 22:17 ./source/ap/diffutils/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-13 04:41 ./source/ap/dmapi
+-rw-r--r--   1 root root    196416 2009-05-05 17:24 ./source/ap/dmapi/dmapi-2.2.10.tar.xz
+-rwxr-xr-x   1 root root      3798 2010-07-28 18:04 ./source/ap/dmapi/dmapi.SlackBuild
+-rw-r--r--   1 root root       526 2008-04-01 05:05 ./source/ap/dmapi/dmapi.destdir.diff.gz
+-rw-r--r--   1 root root       805 2012-07-22 16:53 ./source/ap/dmapi/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-19 20:28 ./source/ap/dmidecode
+-rw-r--r--   1 root root     54537 2011-01-19 15:00 ./source/ap/dmidecode/dmidecode-2.11.tar.bz2
+-rw-r--r--   1 root root        96 2011-01-19 15:00 ./source/ap/dmidecode/dmidecode-2.11.tar.bz2.sig
+-rwxr-xr-x   1 root root      3252 2011-03-19 20:29 ./source/ap/dmidecode/dmidecode.SlackBuild
+-rw-r--r--   1 root root       215 2007-05-02 19:54 ./source/ap/dmidecode/dmidecode.makefile.diff.gz
+-rw-r--r--   1 root root       933 2007-05-02 20:04 ./source/ap/dmidecode/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/dvd+rw-tools
+-rw-r--r--   1 root root    140846 2008-03-05 08:44 ./source/ap/dvd+rw-tools/dvd+rw-tools-7.1.tar.gz
+-rwxr-xr-x   1 root root      2743 2011-04-14 18:30 ./source/ap/dvd+rw-tools/dvd+rw-tools.SlackBuild
+-rw-r--r--   1 root root       185 2008-04-07 04:06 ./source/ap/dvd+rw-tools/dvd+rw-tools.limits.h.diff.gz
+-rw-r--r--   1 root root        49 2003-09-02 03:20 ./source/ap/dvd+rw-tools/dvd+rw-tools.url
+-rw-r--r--   1 root root       823 2008-02-11 03:44 ./source/ap/dvd+rw-tools/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 18:19 ./source/ap/enscript
+-rw-r--r--   1 root root    804704 2010-06-01 23:22 ./source/ap/enscript/enscript-1.6.5.2.tar.xz
+-rwxr-xr-x   1 root root      3920 2010-07-28 18:26 ./source/ap/enscript/enscript.SlackBuild
+-rw-r--r--   1 root root       920 2002-03-23 22:26 ./source/ap/enscript/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-09 20:08 ./source/ap/flac
+-rw-r--r--   1 root root   1143864 2007-09-18 20:12 ./source/ap/flac/flac-1.2.1.tar.xz
+-rwxr-xr-x   1 root root      4004 2011-03-09 20:07 ./source/ap/flac/flac.SlackBuild
+-rw-r--r--   1 root root       214 2011-03-09 20:08 ./source/ap/flac/flac.gcc45.diff.gz
+-rw-r--r--   1 root root       371 2008-03-08 21:48 ./source/ap/flac/flac.man.diff.gz
+-rw-r--r--   1 root root      1058 2002-08-26 19:03 ./source/ap/flac/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 16:31 ./source/ap/foomatic-filters
+-rw-r--r--   1 root root       275 2007-09-26 20:11 ./source/ap/foomatic-filters/doinst.sh.gz
+-rw-r--r--   1 root root    203948 2012-02-10 21:28 ./source/ap/foomatic-filters/foomatic-filters-4.0.12.tar.xz
+-rwxr-xr-x   1 root root      4353 2010-02-16 08:54 ./source/ap/foomatic-filters/foomatic-filters.SlackBuild
+-rw-r--r--   1 root root      1104 2008-02-11 03:44 ./source/ap/foomatic-filters/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 17:06 ./source/ap/ghostscript
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std
+-rw-r--r--   1 root root       165 2007-02-19 00:49 ./source/ap/ghostscript-fonts-std/doinst.sh.gz
+-rw-r--r--   1 root root   3621829 2003-07-24 12:38 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std-8.11.tar.bz2
+-rwxr-xr-x   1 root root      2267 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std.SlackBuild
+-rw-r--r--   1 root root       840 2007-02-19 00:47 ./source/ap/ghostscript-fonts-std/slack-desc
+-rw-r--r--   1 root root      1436 2008-04-11 20:41 ./source/ap/ghostscript/cidfmap.gz
+-rw-r--r--   1 root root  21109744 2012-06-19 16:20 ./source/ap/ghostscript/ghostscript-9.05.tar.xz
+-rwxr-xr-x   1 root root      6055 2012-07-04 17:27 ./source/ap/ghostscript/ghostscript.SlackBuild
+-rw-r--r--   1 root root      1011 2008-03-02 02:54 ./source/ap/ghostscript/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/ap/gphoto2
+-rw-r--r--   1 root root    508448 2012-05-19 21:27 ./source/ap/gphoto2/gphoto2-2.4.14.tar.xz
+-rwxr-xr-x   1 root root      3613 2012-06-25 22:55 ./source/ap/gphoto2/gphoto2.SlackBuild
+-rw-r--r--   1 root root       762 2008-09-11 03:57 ./source/ap/gphoto2/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-27 19:32 ./source/ap/groff
+-rw-r--r--   1 root root   2480692 2010-12-31 07:47 ./source/ap/groff/groff-1.21.tar.xz
+-rwxr-xr-x   1 root root      4717 2011-01-27 19:38 ./source/ap/groff/groff.SlackBuild
+-rw-r--r--   1 root root       459 2005-06-23 01:46 ./source/ap/groff/groff.man.mdoc.local.gz
+-rw-r--r--   1 root root       887 2002-03-23 22:27 ./source/ap/groff/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 16:38 ./source/ap/gutenprint
+-rw-r--r--   1 root root   4206872 2012-07-08 02:26 ./source/ap/gutenprint/gutenprint-5.2.9.tar.xz
+-rwxr-xr-x   1 root root      4073 2012-07-20 16:39 ./source/ap/gutenprint/gutenprint.SlackBuild
+-rw-r--r--   1 root root      1010 2006-08-12 05:40 ./source/ap/gutenprint/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-10 02:48 ./source/ap/hplip
+-rw-r--r--   1 root root       118 2009-03-05 16:38 ./source/ap/hplip/doinst.sh.gz
+-rw-r--r--   1 root root  15715072 2012-09-07 06:58 ./source/ap/hplip/hplip-3.12.9.tar.xz
+-rwxr-xr-x   1 root root      3889 2012-09-10 02:50 ./source/ap/hplip/hplip.SlackBuild
+-rw-r--r--   1 root root       935 2009-03-05 17:13 ./source/ap/hplip/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-17 23:02 ./source/ap/htop
+-rw-r--r--   1 root root    264772 2012-02-16 18:37 ./source/ap/htop/htop-1.0.1.tar.xz
+-rwxr-xr-x   1 root root      3635 2011-08-11 18:48 ./source/ap/htop/htop.SlackBuild
+-rw-r--r--   1 root root       933 2011-08-11 18:52 ./source/ap/htop/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/ispell
+-rw-r--r--   1 root root    580742 2001-08-01 22:17 ./source/ap/ispell/ispell-3.2.06.tar.gz
+-rwxr-xr-x   1 root root      3345 2010-07-28 18:37 ./source/ap/ispell/ispell.SlackBuild
+-rw-r--r--   1 root root      5808 2001-06-08 20:52 ./source/ap/ispell/ispell.diff.gz
+-rw-r--r--   1 root root      1057 2002-03-23 22:27 ./source/ap/ispell/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-18 23:11 ./source/ap/jed
+-rw-r--r--   1 root root    884198 2009-12-14 02:30 ./source/ap/jed/jed-0.99-19.tar.bz2
+-rw-r--r--   1 root root       261 2009-12-14 02:33 ./source/ap/jed/jed-0.99-19.tar.bz2.asc
+-rwxr-xr-x   1 root root      3136 2010-02-18 23:13 ./source/ap/jed/jed.SlackBuild
+-rw-r--r--   1 root root       938 2002-03-23 22:28 ./source/ap/jed/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 18:38 ./source/ap/joe
+-rw-r--r--   1 root root    443056 2010-07-28 18:37 ./source/ap/joe/joe-3.7.tar.xz
+-rwxr-xr-x   1 root root      3113 2010-07-28 18:40 ./source/ap/joe/joe.SlackBuild
+-rw-r--r--   1 root root       599 2002-02-24 21:25 ./source/ap/joe/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 18:43 ./source/ap/jove
+-rwxr-xr-x   1 root root      3166 2010-07-28 18:44 ./source/ap/jove/jove.SlackBuild
+-rw-r--r--   1 root root      1709 2009-03-04 05:45 ./source/ap/jove/jove.makefile.diff.gz
+-rw-r--r--   1 root root    357932 2010-07-11 15:35 ./source/ap/jove/jove4.16.0.73.tar.xz
+-rw-r--r--   1 root root       792 2009-03-04 05:45 ./source/ap/jove/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 19:28 ./source/ap/ksh93
+-rw-r--r--   1 root root     12885 2004-12-16 17:19 ./source/ap/ksh93/CPL
+-rw-r--r--   1 root root    362425 2010-07-28 18:49 ./source/ap/ksh93/INIT.2010-06-21.tgz
+-rw-r--r--   1 root root    721167 2010-07-28 18:50 ./source/ap/ksh93/ast-ksh-locale.2010-02-02.tgz
+-rw-r--r--   1 root root   1914305 2010-07-28 18:49 ./source/ap/ksh93/ast-ksh.2010-06-21.tgz
+-rwxr-xr-x   1 root root      5254 2010-07-28 19:24 ./source/ap/ksh93/ksh93.SlackBuild
+-rw-r--r--   1 root root       996 2002-03-23 22:28 ./source/ap/ksh93/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/libx86
+-rw-r--r--   1 root root     87428 2008-05-19 09:30 ./source/ap/libx86/libx86-1.1.tar.gz
+-rwxr-xr-x   1 root root      2943 2010-07-28 19:29 ./source/ap/libx86/libx86.SlackBuild
+-rw-r--r--   1 root root       127 2008-11-24 18:21 ./source/ap/libx86/libx86.info
+-rw-r--r--   1 root root       324 2008-11-24 08:27 ./source/ap/libx86/lrmi.c.diff.gz
+-rw-r--r--   1 root root       769 2008-11-24 18:22 ./source/ap/libx86/slack-desc
+drwxr-xr-x   4 root root      4096 2012-06-29 17:37 ./source/ap/linuxdoc-tools
+-rw-r--r--   1 root root      8016 2012-06-29 16:36 ./source/ap/linuxdoc-tools/ChangeLog.txt
+drwxr-xr-x   2 root root      4096 2005-10-04 18:51 ./source/ap/linuxdoc-tools/arm
+-rwxr-xr-x   1 root root      1593 2012-06-29 16:26 ./source/ap/linuxdoc-tools/arm/build
+-rwxr-xr-x   1 root root        28 2006-02-05 00:16 ./source/ap/linuxdoc-tools/linuxdoc-tools.SlackBuild
+-rwxr-xr-x   1 root root     31741 2012-06-29 16:31 ./source/ap/linuxdoc-tools/linuxdoc-tools.build
+-rwxr-xr-x   1 root root      2786 2010-02-10 11:36 ./source/ap/linuxdoc-tools/postbuildfixes.sh
+-rw-r--r--   1 root root      1166 2006-06-26 15:17 ./source/ap/linuxdoc-tools/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-30 16:04 ./source/ap/linuxdoc-tools/sources
+-rw-r--r--   1 root root    733052 2012-03-17 03:21 ./source/ap/linuxdoc-tools/sources/asciidoc-8.6.7.tar.xz
+-rw-r--r--   1 root root    224920 2007-05-05 12:33 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-1.79.tar.xz
+-rw-r--r--   1 root root    134196 2004-11-12 12:42 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-doc-1.79.tar.xz
+-rw-r--r--   1 root root   5139331 2012-05-28 20:54 ./source/ap/linuxdoc-tools/sources/docbook-style-xsl-1.76.1-5.fc17.src.rpm
+-rw-r--r--   1 root root    168776 2012-05-28 20:51 ./source/ap/linuxdoc-tools/sources/docbook-utils-0.6.14-30.fc17.src.rpm
+-rw-r--r--   1 root root     98497 2006-10-26 17:17 ./source/ap/linuxdoc-tools/sources/docbook-xml-4.5.zip
+-rw-r--r--   1 root root    133260 2007-04-11 01:17 ./source/ap/linuxdoc-tools/sources/docbook_4.5.orig.tar.xz
+-rw-rw-r--   1 root root    526700 2012-05-28 20:56 ./source/ap/linuxdoc-tools/sources/gnome-doc-utils-0.20.10.tar.xz
+-rw-r--r--   1 root root    637936 2011-09-14 13:55 ./source/ap/linuxdoc-tools/sources/gtk-doc-1.18.tar.xz
+-rw-r--r--   1 root root      7808 2008-01-04 17:02 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii-32.diff.xz
+-rw-r--r--   1 root root     68364 2001-04-15 16:15 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii.orig.tar.xz
+-rw-r--r--   1 root root    634287 2012-05-28 20:40 ./source/ap/linuxdoc-tools/sources/linuxdoc-tools-0.9.67-1.fc18.src.rpm
+-r--r--r--   1 root root       756 2012-05-30 14:39 ./source/ap/linuxdoc-tools/sources/openjade-1.3-getopts.pl.xz
+-rw-r--r--   1 root root       712 2012-05-28 20:45 ./source/ap/linuxdoc-tools/sources/openjade-1.3.2-gcc46.patch.xz
+-rw-r--r--   1 root root    711620 2003-04-18 20:32 ./source/ap/linuxdoc-tools/sources/openjade-1.3.3-pre1.tar.xz
+-rw-r--r--   1 root root   1525391 2012-05-28 20:42 ./source/ap/linuxdoc-tools/sources/opensp-1.5.2-14.fc17.src.rpm
+-rw-r--r--   1 root root     99245 2012-05-28 20:48 ./source/ap/linuxdoc-tools/sources/sgml-common-0.6.3-36.fc17.src.rpm
+-rwxr-xr-x   1 root root      5198 2012-05-30 16:04 ./source/ap/linuxdoc-tools/sources/source.download
+-rw-rw-r--   1 root root    106096 2012-05-28 21:00 ./source/ap/linuxdoc-tools/sources/xmlto-0.0.25.tar.xz
+-rwxr-xr-x   1 root root      2813 2012-06-29 16:26 ./source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools
+drwxr-xr-x   2 root root      4096 2012-08-03 16:48 ./source/ap/lm_sensors
+-rw-r--r--   1 root root    171111 2012-03-14 07:49 ./source/ap/lm_sensors/lm_sensors-3.3.2.tar.bz2
+-rw-r--r--   1 root root        65 2012-03-14 07:49 ./source/ap/lm_sensors/lm_sensors-3.3.2.tar.bz2.sig
+-rwxr-xr-x   1 root root      3734 2012-08-03 16:48 ./source/ap/lm_sensors/lm_sensors.SlackBuild
+-rw-r--r--   1 root root       312 2008-10-26 01:06 ./source/ap/lm_sensors/lm_sensors.makefile.diff.gz
+-rw-r--r--   1 root root      1105 2006-09-20 03:52 ./source/ap/lm_sensors/slack-desc
+drwxr-xr-x   2 root root      4096 2010-03-13 01:02 ./source/ap/lsof
+-rwxr-xr-x   1 root root      2744 2010-03-13 01:05 ./source/ap/lsof/lsof.SlackBuild
+-rw-r--r--   1 root root    753094 2010-01-18 19:11 ./source/ap/lsof/lsof_4.83.tar.bz2
+-rw-r--r--   1 root root       152 2010-01-18 19:12 ./source/ap/lsof/lsof_4.83.tar.bz2.sig
+-rw-r--r--   1 root root       789 2002-03-17 00:42 ./source/ap/lsof/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/ap/lsscsi
+-rw-r--r--   1 root root    101276 2012-02-19 16:55 ./source/ap/lsscsi/lsscsi-0.26.tar.xz
+-rwxr-xr-x   1 root root      3832 2012-06-25 22:55 ./source/ap/lsscsi/lsscsi.SlackBuild
+-rw-r--r--   1 root root        36 2008-11-29 19:46 ./source/ap/lsscsi/lsscsi.url
+-rw-r--r--   1 root root       825 2007-05-02 19:26 ./source/ap/lsscsi/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-10 20:05 ./source/ap/lxc
+-rw-r--r--   1 root root    184120 2011-08-11 17:14 ./source/ap/lxc/lxc-0.7.5.tar.xz
+-rwxr-xr-x   1 root root      4110 2012-08-10 20:05 ./source/ap/lxc/lxc.SlackBuild
+-rw-r--r--   1 root root       961 2011-02-08 20:34 ./source/ap/lxc/slack-desc
+drwxr-xr-x   2 root root      4096 2011-04-02 18:03 ./source/ap/madplay
+-rw-r--r--   1 root root       285 2011-04-02 17:59 ./source/ap/madplay/madplay-0.15.2b-fix-segfault.patch.gz
+-rw-r--r--   1 root root    361360 2004-02-23 23:28 ./source/ap/madplay/madplay-0.15.2b.tar.xz
+-rwxr-xr-x   1 root root      2848 2011-04-02 18:03 ./source/ap/madplay/madplay.SlackBuild
+-rw-r--r--   1 root root       797 2003-09-10 00:59 ./source/ap/madplay/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-04 23:42 ./source/ap/man
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/ap/man-pages
+-rw-r--r--   1 root root       147 2008-07-17 17:25 ./source/ap/man-pages/doinst.sh.gz
+-rw-r--r--   1 root root   1090072 2012-05-10 20:26 ./source/ap/man-pages/man-pages-3.41.tar.xz
+-rw-r--r--   1 root root    971300 2008-06-17 11:18 ./source/ap/man-pages/man-pages-posix-2003-a.tar.bz2
+-rwxr-xr-x   1 root root      3751 2012-06-25 22:55 ./source/ap/man-pages/man-pages.SlackBuild
+-rw-r--r--   1 root root       950 2008-07-17 17:29 ./source/ap/man-pages/slack-desc
+-rw-r--r--   1 root root    156268 2009-06-14 02:57 ./source/ap/man-pages/whatis.sample.xz
+-rw-r--r--   1 root root       274 2008-04-09 19:04 ./source/ap/man/doinst.sh.gz
+-rw-r--r--   1 root root       215 2009-08-09 01:53 ./source/ap/man/man-1.6f.nroff.mandoc.diff.gz
+-rw-r--r--   1 root root    213636 2011-01-01 01:06 ./source/ap/man/man-1.6g.tar.xz
+-rwxr-xr-x   1 root root      3351 2011-01-04 23:47 ./source/ap/man/man.SlackBuild
+-rw-r--r--   1 root root       901 2002-03-23 22:29 ./source/ap/man/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-09 17:00 ./source/ap/mc
+-rw-r--r--   1 root root   2114996 2012-07-18 13:36 ./source/ap/mc/mc-4.8.4.tar.xz
+-rwxr-xr-x   1 root root      4099 2012-09-09 17:03 ./source/ap/mc/mc.SlackBuild
+-rw-r--r--   1 root root       228 2012-09-08 19:39 ./source/ap/mc/mc.image.sh.geeqie.diff.gz
+-rw-r--r--   1 root root       665 2012-09-09 16:56 ./source/ap/mc/mc.save.file.diff.gz
+drwxr-xr-x   2 root root      4096 2009-07-14 20:23 ./source/ap/mc/profile.d
+-rwxr-xr-x   1 root root       389 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.csh
+-rwxr-xr-x   1 root root       315 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.sh
+-rwxr-xr-x   1 root root        51 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.csh
+-rwxr-xr-x   1 root root        45 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.sh
+-rw-r--r--   1 root root       904 2002-02-26 05:38 ./source/ap/mc/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-23 01:10 ./source/ap/moc
+-rw-r--r--   1 root root    430508 2009-09-25 09:19 ./source/ap/moc/moc-2.5.0-alpha4.tar.xz
+-rwxr-xr-x   1 root root      4103 2012-07-04 16:35 ./source/ap/moc/moc.SlackBuild
+-rw-r--r--   1 root root       874 2011-01-23 00:34 ./source/ap/moc/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-22 02:44 ./source/ap/most
+-rw-r--r--   1 root root    131130 2007-09-09 16:16 ./source/ap/most/most-5.0.0a.tar.bz2
+-rwxr-xr-x   1 root root      2950 2010-07-28 19:35 ./source/ap/most/most.SlackBuild
+-rw-r--r--   1 root root       833 2003-06-06 00:54 ./source/ap/most/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-10 17:15 ./source/ap/mpg123
+-rw-r--r--   1 root root    649956 2012-07-26 13:46 ./source/ap/mpg123/mpg123-1.14.4.tar.xz
+-rwxr-xr-x   1 root root      5421 2011-03-10 21:15 ./source/ap/mpg123/mpg123.SlackBuild
+-rw-r--r--   1 root root       788 2009-12-15 17:57 ./source/ap/mpg123/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-27 19:46 ./source/ap/mysql
+-rw-r--r--   1 root root       377 2012-05-16 19:25 ./source/ap/mysql/README.mysql-embedded
+-rw-r--r--   1 root root       342 2012-05-21 15:35 ./source/ap/mysql/doinst.sh.gz
+-rw-r--r--   1 root root        62 2012-07-07 01:40 ./source/ap/mysql/mirror-url
+-rw-r--r--   1 root root  13789648 2012-07-21 16:36 ./source/ap/mysql/mysql-5.5.27.tar.xz
+-rwxr-xr-x   1 root root      6680 2012-08-27 20:41 ./source/ap/mysql/mysql-embedded.SlackBuild
+-rwxr-xr-x   1 root root      6666 2012-08-27 20:41 ./source/ap/mysql/mysql.SlackBuild
+-rw-r--r--   1 root root      1208 2008-04-17 20:26 ./source/ap/mysql/rc.mysqld.gz
+-rw-r--r--   1 root root       816 2002-03-23 22:31 ./source/ap/mysql/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-18 08:47 ./source/ap/nano
+-rw-r--r--   1 root root       269 2012-06-18 08:46 ./source/ap/nano/doinst.sh.gz
+-rw-r--r--   1 root root    844776 2011-05-11 04:55 ./source/ap/nano/nano-2.3.1.tar.xz
+-rwxr-xr-x   1 root root      4676 2012-06-18 08:58 ./source/ap/nano/nano.SlackBuild
+-rw-r--r--   1 root root       870 2007-04-07 20:52 ./source/ap/nano/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-10 01:26 ./source/ap/normalize
+-rw-r--r--   1 root root    388777 2005-09-14 18:46 ./source/ap/normalize/normalize-0.7.7.tar.bz2
+-rwxr-xr-x   1 root root      2751 2010-07-28 19:36 ./source/ap/normalize/normalize.SlackBuild
+-rw-r--r--   1 root root       971 2004-05-25 04:30 ./source/ap/normalize/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-03 06:38 ./source/ap/pm-utils
+-rw-r--r--   1 root root       168 2010-12-30 23:12 ./source/ap/pm-utils/49bluetooth-generic
+-rw-r--r--   1 root root      6659 2010-12-30 02:48 ./source/ap/pm-utils/README.SLACKWARE
+-rw-r--r--   1 root root       635 2011-01-03 06:36 ./source/ap/pm-utils/fix-wrong-path-in-intel-audio-powersave.patch.gz
+-rw-r--r--   1 root root     10033 2010-06-19 23:55 ./source/ap/pm-utils/pm-quirks-20100619.tar.gz
+-rw-r--r--   1 root root    208687 2010-07-04 15:00 ./source/ap/pm-utils/pm-utils-1.4.1.tar.gz
+-rwxr-xr-x   1 root root      4656 2011-01-03 06:40 ./source/ap/pm-utils/pm-utils.SlackBuild
+-rw-r--r--   1 root root        32 2009-04-14 04:05 ./source/ap/pm-utils/pm-utils.url
+-rw-r--r--   1 root root       835 2009-04-14 04:05 ./source/ap/pm-utils/slack-desc
+-rw-r--r--   1 root root       343 2010-12-27 20:23 ./source/ap/pm-utils/use_more_sane_harddrive_defaults.patch.gz
+drwxr-xr-x   2 root root      4096 2012-08-22 16:57 ./source/ap/powertop
+-rw-r--r--   1 root root    607908 2012-08-15 14:44 ./source/ap/powertop/powertop-2.1.tar.xz
+-rwxr-xr-x   1 root root      4028 2012-08-28 21:43 ./source/ap/powertop/powertop.SlackBuild
+-rw-r--r--   1 root root      1007 2010-05-04 04:42 ./source/ap/powertop/slack-desc
+drwxr-xr-x   2 root root      4096 2010-03-25 23:07 ./source/ap/radeontool
+-rw-r--r--   1 root root    338446 2010-03-24 03:21 ./source/ap/radeontool/radeontool-1.6.1.tar.bz2
+-rwxr-xr-x   1 root root      2915 2010-07-28 23:58 ./source/ap/radeontool/radeontool.SlackBuild
+-rw-r--r--   1 root root       802 2008-11-24 19:37 ./source/ap/radeontool/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/ap/rexima
+-rw-r--r--   1 root root     15903 2003-07-01 08:56 ./source/ap/rexima/rexima-1.4.tar.gz
+-rwxr-xr-x   1 root root      2381 2010-07-28 19:38 ./source/ap/rexima/rexima.SlackBuild
+-rw-r--r--   1 root root       829 2002-05-29 20:44 ./source/ap/rexima/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/ap/rpm
+-rw-r--r--   1 root root       133 2009-11-27 18:09 ./source/ap/rpm/Packages.gz
+-rw-r--r--   1 root root       132 2009-11-27 18:09 ./source/ap/rpm/doinst.sh.gz
+-rw-r--r--   1 root root   2822708 2012-05-25 02:39 ./source/ap/rpm/rpm-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4258 2012-07-11 03:27 ./source/ap/rpm/rpm.SlackBuild
+-rw-r--r--   1 root root       948 2009-11-27 18:09 ./source/ap/rpm/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/rzip
+-rw-r--r--   1 root root     46785 2006-02-14 00:41 ./source/ap/rzip/rzip-2.1.tar.gz
+-rwxr-xr-x   1 root root      2749 2010-07-28 22:22 ./source/ap/rzip/rzip.SlackBuild
+-rw-r--r--   1 root root       723 2004-06-03 03:13 ./source/ap/rzip/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-28 19:40 ./source/ap/sc
+-rw-r--r--   1 root root       309 1999-08-03 23:52 ./source/ap/sc/_sc.tar.gz
+-rw-r--r--   1 root root      4598 2010-05-03 21:09 ./source/ap/sc/sc-7.16-3.diff.gz
+-rw-r--r--   1 root root       636 2002-09-20 05:00 ./source/ap/sc/sc-7.16.lsm
+-rw-r--r--   1 root root    210809 2002-09-20 05:00 ./source/ap/sc/sc-7.16.tar.gz
+-rwxr-xr-x   1 root root      2976 2010-07-28 19:41 ./source/ap/sc/sc.SlackBuild
+-rw-r--r--   1 root root       576 2002-02-24 21:19 ./source/ap/sc/slack-desc
+drwxr-xr-x   2 root root      4096 2011-07-18 21:02 ./source/ap/screen
+-rw-r--r--   1 root root    741741 2006-10-23 13:10 ./source/ap/screen/screen-4.0.3.tar.bz2
+-rwxr-xr-x   1 root root      4231 2011-07-18 21:07 ./source/ap/screen/screen.SlackBuild
+-rw-r--r--   1 root root       479 2011-07-18 21:02 ./source/ap/screen/screen.d_termname.envterm.buffersizeincrease.diff.gz
+-rw-r--r--   1 root root      1111 2002-03-23 22:34 ./source/ap/screen/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/seejpeg
+-rw-r--r--   1 root root       227 2000-04-30 06:01 ./source/ap/seejpeg/_seejpeg.tar.gz
+-rw-r--r--   1 root root    500701 1996-07-25 23:00 ./source/ap/seejpeg/libjpeg-6a.tar.gz
+-rw-r--r--   1 root root       654 2000-04-30 05:52 ./source/ap/seejpeg/seejpeg-1.10.diff.gz
+-rw-r--r--   1 root root       855 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.lsm
+-rw-r--r--   1 root root     46550 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.tgz
+-rwxr-xr-x   1 root root      2557 2010-07-28 19:43 ./source/ap/seejpeg/seejpeg.SlackBuild
+-rw-r--r--   1 root root       913 2002-03-23 22:34 ./source/ap/seejpeg/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-25 06:59 ./source/ap/slackpkg
+-rw-r--r--   1 root root        69 2008-11-21 19:07 ./source/ap/slackpkg/README
+drwxr-xr-x   2 root root      4096 2012-08-18 17:38 ./source/ap/soma
+-rw-r--r--   1 root root       745 2012-08-18 17:35 ./source/ap/soma/slack-desc
+-rw-r--r--   1 root root      9817 2012-08-18 17:36 ./source/ap/soma/soma-2.8.5.tar.gz
+-rwxr-xr-x   1 root root      2240 2012-08-18 17:38 ./source/ap/soma/soma.SlackBuild
+-rw-r--r--   1 root root       335 2012-08-18 17:35 ./source/ap/soma/soma.info
+-rw-r--r--   1 root root    229691 2010-05-04 00:51 ./source/ap/soma/soma.png
+-rw-r--r--   1 root root      2006 2011-08-16 22:20 ./source/ap/soma/stations.conf
+drwxr-xr-x   2 root root      4096 2012-07-15 16:35 ./source/ap/sox
+-rw-r--r--   1 root root       749 2011-04-02 22:32 ./source/ap/sox/slack-desc
+-rw-r--r--   1 root root    750532 2012-03-04 23:17 ./source/ap/sox/sox-14.4.0.tar.xz
+-rwxr-xr-x   1 root root      3569 2011-04-02 22:36 ./source/ap/sox/sox.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-21 16:42 ./source/ap/sqlite
+-rw-r--r--   1 root root      1684 2008-08-01 05:31 ./source/ap/sqlite/COPYRIGHT.gz
+-rw-r--r--   1 root root       942 2008-08-01 01:21 ./source/ap/sqlite/slack-desc
+-rw-r--r--   1 root root   2981580 2012-06-14 17:02 ./source/ap/sqlite/sqlite-src-3071300.tar.xz
+-rwxr-xr-x   1 root root      4229 2012-02-06 22:26 ./source/ap/sqlite/sqlite.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-28 18:52 ./source/ap/sudo
+-rw-r--r--   1 root root       275 2004-09-19 00:25 ./source/ap/sudo/doinst.sh.gz
+-rw-r--r--   1 root root       869 2002-03-23 22:36 ./source/ap/sudo/slack-desc
+-rw-r--r--   1 root root   1105088 2012-05-29 18:33 ./source/ap/sudo/sudo-1.8.5p2.tar.xz
+-rwxr-xr-x   1 root root      3734 2012-06-28 18:55 ./source/ap/sudo/sudo.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-04-25 23:24 ./source/ap/sysstat
+-rw-r--r--   1 root root       527 2009-08-30 05:02 ./source/ap/sysstat/doinst.sh.gz
+-rw-r--r--   1 root root       902 2009-08-30 04:53 ./source/ap/sysstat/slack-desc
+-rw-r--r--   1 root root    243939 2010-02-28 08:50 ./source/ap/sysstat/sysstat-9.0.6.1.tar.bz2
+-rwxr-xr-x   1 root root      5157 2010-04-25 23:27 ./source/ap/sysstat/sysstat.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-23 00:42 ./source/ap/texinfo
+-rw-r--r--   1 root root      5853 2008-11-20 23:57 ./source/ap/texinfo/dir.gz
+-rw-r--r--   1 root root       251 2008-11-21 00:01 ./source/ap/texinfo/doinst.sh.gz
+-rw-r--r--   1 root root      1074 2002-03-22 20:41 ./source/ap/texinfo/slack-desc
+-rw-r--r--   1 root root   1969110 2008-09-29 15:17 ./source/ap/texinfo/texinfo-4.13a.tar.bz2
+-rwxr-xr-x   1 root root      3166 2010-07-28 19:44 ./source/ap/texinfo/texinfo.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/ap/vbetool
+-rw-r--r--   1 root root       833 2012-07-22 16:54 ./source/ap/vbetool/slack-desc
+-rw-r--r--   1 root root    182826 2008-05-16 12:56 ./source/ap/vbetool/vbetool-1.1.tar.gz
+-rwxr-xr-x   1 root root      2844 2010-07-28 19:46 ./source/ap/vbetool/vbetool.SlackBuild
+-rw-r--r--   1 root root       129 2008-11-24 18:23 ./source/ap/vbetool/vbetool.info
+drwxr-xr-x   3 root root      4096 2011-03-28 19:08 ./source/ap/vim
+-rw-r--r--   1 root root    479927 2009-07-09 22:03 ./source/ap/vim/ctags-5.8.tar.gz
+-rw-r--r--   1 root root       118 2006-08-23 23:20 ./source/ap/vim/doinst.sh.gz
+-rw-r--r--   1 root root      4203 2007-02-16 22:42 ./source/ap/vim/gvim.desktop
+-rw-r--r--   1 root root      8249 2006-01-19 17:01 ./source/ap/vim/gvim.png
+drwxr-xr-x   2 root root     20480 2012-08-29 16:32 ./source/ap/vim/patches
+-rw-r--r--   1 root root       843 2010-08-16 20:05 ./source/ap/vim/patches/7.3.001.gz
+-rw-r--r--   1 root root       793 2010-08-16 20:35 ./source/ap/vim/patches/7.3.002.gz
+-rw-r--r--   1 root root       698 2010-08-17 18:36 ./source/ap/vim/patches/7.3.003.gz
+-rw-r--r--   1 root root       699 2010-09-14 08:57 ./source/ap/vim/patches/7.3.004.gz
+-rw-r--r--   1 root root      1104 2010-09-14 10:48 ./source/ap/vim/patches/7.3.005.gz
+-rw-r--r--   1 root root      1152 2010-09-18 11:37 ./source/ap/vim/patches/7.3.006.gz
+-rw-r--r--   1 root root      1686 2010-09-21 14:50 ./source/ap/vim/patches/7.3.007.gz
+-rw-r--r--   1 root root      2949 2010-09-21 14:57 ./source/ap/vim/patches/7.3.008.gz
+-rw-r--r--   1 root root      1466 2010-09-21 15:30 ./source/ap/vim/patches/7.3.009.gz
+-rw-r--r--   1 root root      1828 2010-09-21 15:35 ./source/ap/vim/patches/7.3.010.gz
+-rw-r--r--   1 root root      2699 2010-09-21 20:11 ./source/ap/vim/patches/7.3.011.gz
+-rw-r--r--   1 root root       830 2010-09-29 11:04 ./source/ap/vim/patches/7.3.012.gz
+-rw-r--r--   1 root root      2016 2010-09-29 11:04 ./source/ap/vim/patches/7.3.013.gz
+-rw-r--r--   1 root root      1105 2010-09-29 13:52 ./source/ap/vim/patches/7.3.014.gz
+-rw-r--r--   1 root root       932 2010-09-29 14:56 ./source/ap/vim/patches/7.3.015.gz
+-rw-r--r--   1 root root      2154 2010-09-29 15:28 ./source/ap/vim/patches/7.3.016.gz
+-rw-r--r--   1 root root      1427 2010-09-29 16:34 ./source/ap/vim/patches/7.3.017.gz
+-rw-r--r--   1 root root       989 2010-09-29 16:43 ./source/ap/vim/patches/7.3.018.gz
+-rw-r--r--   1 root root       836 2010-09-30 19:04 ./source/ap/vim/patches/7.3.019.gz
+-rw-r--r--   1 root root      1330 2010-10-09 15:23 ./source/ap/vim/patches/7.3.020.gz
+-rw-r--r--   1 root root       958 2010-10-10 15:10 ./source/ap/vim/patches/7.3.021.gz
+-rw-r--r--   1 root root       815 2010-10-13 12:07 ./source/ap/vim/patches/7.3.022.gz
+-rw-r--r--   1 root root      1030 2010-10-13 14:23 ./source/ap/vim/patches/7.3.023.gz
+-rw-r--r--   1 root root      1255 2010-10-13 14:45 ./source/ap/vim/patches/7.3.024.gz
+-rw-r--r--   1 root root      1461 2010-10-13 15:51 ./source/ap/vim/patches/7.3.025.gz
+-rw-r--r--   1 root root       893 2010-10-13 16:08 ./source/ap/vim/patches/7.3.026.gz
+-rw-r--r--   1 root root      1217 2010-10-13 18:38 ./source/ap/vim/patches/7.3.027.gz
+-rw-r--r--   1 root root      1887 2010-10-14 19:30 ./source/ap/vim/patches/7.3.028.gz
+-rw-r--r--   1 root root      1663 2010-10-15 18:21 ./source/ap/vim/patches/7.3.029.gz
+-rw-r--r--   1 root root      3235 2010-10-20 15:45 ./source/ap/vim/patches/7.3.030.gz
+-rw-r--r--   1 root root      1527 2010-10-20 17:18 ./source/ap/vim/patches/7.3.031.gz
+-rw-r--r--   1 root root      6128 2010-10-20 19:24 ./source/ap/vim/patches/7.3.032.gz
+-rw-r--r--   1 root root       728 2010-10-22 20:15 ./source/ap/vim/patches/7.3.033.gz
+-rw-r--r--   1 root root      3363 2010-10-23 12:04 ./source/ap/vim/patches/7.3.034.gz
+-rw-r--r--   1 root root       878 2010-10-24 12:35 ./source/ap/vim/patches/7.3.035.gz
+-rw-r--r--   1 root root       929 2010-10-27 10:16 ./source/ap/vim/patches/7.3.036.gz
+-rw-r--r--   1 root root      1509 2010-10-27 10:18 ./source/ap/vim/patches/7.3.037.gz
+-rw-r--r--   1 root root      1113 2010-10-27 10:59 ./source/ap/vim/patches/7.3.038.gz
+-rw-r--r--   1 root root      1083 2010-10-27 10:59 ./source/ap/vim/patches/7.3.039.gz
+-rw-r--r--   1 root root       835 2010-10-27 11:39 ./source/ap/vim/patches/7.3.040.gz
+-rw-r--r--   1 root root       835 2010-10-27 14:02 ./source/ap/vim/patches/7.3.041.gz
+-rw-r--r--   1 root root       988 2010-10-27 14:18 ./source/ap/vim/patches/7.3.042.gz
+-rw-r--r--   1 root root      4032 2010-10-27 14:50 ./source/ap/vim/patches/7.3.043.gz
+-rw-r--r--   1 root root       863 2010-10-27 15:12 ./source/ap/vim/patches/7.3.044.gz
+-rw-r--r--   1 root root       819 2010-10-27 15:39 ./source/ap/vim/patches/7.3.045.gz
+-rw-r--r--   1 root root       998 2010-10-27 15:41 ./source/ap/vim/patches/7.3.046.gz
+-rw-r--r--   1 root root      1309 2010-10-27 16:37 ./source/ap/vim/patches/7.3.047.gz
+-rw-r--r--   1 root root      1388 2010-11-03 18:34 ./source/ap/vim/patches/7.3.048.gz
+-rw-r--r--   1 root root      3386 2010-11-04 08:46 ./source/ap/vim/patches/7.3.049.gz
+-rw-r--r--   1 root root      2069 2010-11-04 08:46 ./source/ap/vim/patches/7.3.050.gz
+-rw-r--r--   1 root root      1350 2010-11-10 14:38 ./source/ap/vim/patches/7.3.051.gz
+-rw-r--r--   1 root root      2797 2010-11-10 17:58 ./source/ap/vim/patches/7.3.052.gz
+-rw-r--r--   1 root root      1195 2010-11-10 17:58 ./source/ap/vim/patches/7.3.053.gz
+-rw-r--r--   1 root root      1528 2010-11-10 18:01 ./source/ap/vim/patches/7.3.054.gz
+-rw-r--r--   1 root root      2770 2010-11-10 19:44 ./source/ap/vim/patches/7.3.055.gz
+-rw-r--r--   1 root root      3899 2010-11-16 10:33 ./source/ap/vim/patches/7.3.056.gz
+-rw-r--r--   1 root root      1037 2010-11-16 13:07 ./source/ap/vim/patches/7.3.057.gz
+-rw-r--r--   1 root root      1650 2010-11-16 13:46 ./source/ap/vim/patches/7.3.058.gz
+-rw-r--r--   1 root root      1464 2010-11-16 14:06 ./source/ap/vim/patches/7.3.059.gz
+-rw-r--r--   1 root root      2038 2010-11-16 14:49 ./source/ap/vim/patches/7.3.060.gz
+-rw-r--r--   1 root root      1483 2010-11-16 15:26 ./source/ap/vim/patches/7.3.061.gz
+-rw-r--r--   1 root root      4145 2010-11-16 18:27 ./source/ap/vim/patches/7.3.062.gz
+-rw-r--r--   1 root root      1019 2010-11-24 11:36 ./source/ap/vim/patches/7.3.063.gz
+-rw-r--r--   1 root root      1207 2010-11-24 13:30 ./source/ap/vim/patches/7.3.064.gz
+-rw-r--r--   1 root root      1336 2010-11-24 14:52 ./source/ap/vim/patches/7.3.065.gz
+-rw-r--r--   1 root root      1364 2010-11-24 17:02 ./source/ap/vim/patches/7.3.066.gz
+-rw-r--r--   1 root root      1074 2010-11-24 17:02 ./source/ap/vim/patches/7.3.067.gz
+-rw-r--r--   1 root root       830 2010-11-24 17:02 ./source/ap/vim/patches/7.3.068.gz
+-rw-r--r--   1 root root       869 2010-11-24 17:49 ./source/ap/vim/patches/7.3.069.gz
+-rw-r--r--   1 root root       808 2010-12-02 13:50 ./source/ap/vim/patches/7.3.070.gz
+-rw-r--r--   1 root root      1016 2010-12-02 14:34 ./source/ap/vim/patches/7.3.071.gz
+-rw-r--r--   1 root root      3171 2010-12-02 15:08 ./source/ap/vim/patches/7.3.072.gz
+-rw-r--r--   1 root root      1035 2010-12-02 16:11 ./source/ap/vim/patches/7.3.073.gz
+-rw-r--r--   1 root root      2448 2010-12-02 20:44 ./source/ap/vim/patches/7.3.074.gz
+-rw-r--r--   1 root root      1229 2010-12-02 20:46 ./source/ap/vim/patches/7.3.075.gz
+-rw-r--r--   1 root root      2075 2010-12-08 12:13 ./source/ap/vim/patches/7.3.076.gz
+-rw-r--r--   1 root root      1214 2010-12-08 12:18 ./source/ap/vim/patches/7.3.077.gz
+-rw-r--r--   1 root root       818 2010-12-08 13:24 ./source/ap/vim/patches/7.3.078.gz
+-rw-r--r--   1 root root       735 2010-12-08 13:57 ./source/ap/vim/patches/7.3.079.gz
+-rw-r--r--   1 root root      1811 2010-12-08 16:11 ./source/ap/vim/patches/7.3.080.gz
+-rw-r--r--   1 root root      1030 2010-12-08 18:58 ./source/ap/vim/patches/7.3.081.gz
+-rw-r--r--   1 root root       890 2010-12-17 11:20 ./source/ap/vim/patches/7.3.082.gz
+-rw-r--r--   1 root root      2964 2010-12-17 15:28 ./source/ap/vim/patches/7.3.083.gz
+-rw-r--r--   1 root root      1445 2010-12-17 17:07 ./source/ap/vim/patches/7.3.084.gz
+-rw-r--r--   1 root root      2407 2010-12-17 17:07 ./source/ap/vim/patches/7.3.085.gz
+-rw-r--r--   1 root root      1607 2010-12-17 17:54 ./source/ap/vim/patches/7.3.086.gz
+-rw-r--r--   1 root root      1436 2010-12-17 19:27 ./source/ap/vim/patches/7.3.087.gz
+-rw-r--r--   1 root root      1560 2010-12-24 12:40 ./source/ap/vim/patches/7.3.088.gz
+-rw-r--r--   1 root root       776 2010-12-24 13:00 ./source/ap/vim/patches/7.3.089.gz
+-rw-r--r--   1 root root       971 2010-12-30 10:42 ./source/ap/vim/patches/7.3.090.gz
+-rw-r--r--   1 root root      2776 2010-12-30 11:32 ./source/ap/vim/patches/7.3.091.gz
+-rw-r--r--   1 root root       799 2010-12-30 13:48 ./source/ap/vim/patches/7.3.092.gz
+-rw-r--r--   1 root root      1790 2010-12-30 13:51 ./source/ap/vim/patches/7.3.093.gz
+-rw-r--r--   1 root root       887 2010-12-30 13:58 ./source/ap/vim/patches/7.3.094.gz
+-rw-r--r--   1 root root       872 2011-01-04 16:50 ./source/ap/vim/patches/7.3.095.gz
+-rw-r--r--   1 root root      1208 2011-01-04 17:13 ./source/ap/vim/patches/7.3.096.gz
+-rw-r--r--   1 root root       973 2011-01-04 18:04 ./source/ap/vim/patches/7.3.097.gz
+-rw-r--r--   1 root root       887 2011-01-04 18:26 ./source/ap/vim/patches/7.3.098.gz
+-rw-r--r--   1 root root       786 2011-01-08 13:47 ./source/ap/vim/patches/7.3.099.gz
+-rw-r--r--   1 root root       768 2011-01-17 18:51 ./source/ap/vim/patches/7.3.100.gz
+-rw-r--r--   1 root root       970 2011-01-17 18:54 ./source/ap/vim/patches/7.3.101.gz
+-rw-r--r--   1 root root      4239 2011-01-17 19:09 ./source/ap/vim/patches/7.3.102.gz
+-rw-r--r--   1 root root      1481 2011-01-21 23:14 ./source/ap/vim/patches/7.3.103.gz
+-rw-r--r--   1 root root       812 2011-01-21 23:59 ./source/ap/vim/patches/7.3.104.gz
+-rw-r--r--   1 root root       852 2011-01-22 00:14 ./source/ap/vim/patches/7.3.105.gz
+-rw-r--r--   1 root root       811 2011-01-22 20:06 ./source/ap/vim/patches/7.3.106.gz
+-rw-r--r--   1 root root       980 2011-01-22 20:25 ./source/ap/vim/patches/7.3.107.gz
+-rw-r--r--   1 root root      1276 2011-02-01 12:50 ./source/ap/vim/patches/7.3.108.gz
+-rw-r--r--   1 root root      2469 2011-02-01 13:01 ./source/ap/vim/patches/7.3.109.gz
+-rw-r--r--   1 root root      1001 2011-02-01 16:13 ./source/ap/vim/patches/7.3.110.gz
+-rw-r--r--   1 root root      1575 2011-02-01 17:02 ./source/ap/vim/patches/7.3.111.gz
+-rw-r--r--   1 root root       951 2011-02-01 20:56 ./source/ap/vim/patches/7.3.112.gz
+-rw-r--r--   1 root root       870 2011-02-09 13:47 ./source/ap/vim/patches/7.3.113.gz
+-rw-r--r--   1 root root       844 2011-02-09 15:00 ./source/ap/vim/patches/7.3.114.gz
+-rw-r--r--   1 root root       826 2011-02-09 15:45 ./source/ap/vim/patches/7.3.115.gz
+-rw-r--r--   1 root root       870 2011-02-09 16:10 ./source/ap/vim/patches/7.3.116.gz
+-rw-r--r--   1 root root      1293 2011-02-09 16:44 ./source/ap/vim/patches/7.3.117.gz
+-rw-r--r--   1 root root       980 2011-02-09 17:48 ./source/ap/vim/patches/7.3.118.gz
+-rw-r--r--   1 root root       808 2011-02-12 13:01 ./source/ap/vim/patches/7.3.119.gz
+-rw-r--r--   1 root root      1056 2011-02-15 10:58 ./source/ap/vim/patches/7.3.120.gz
+-rw-r--r--   1 root root       943 2011-02-15 13:25 ./source/ap/vim/patches/7.3.121.gz
+-rw-r--r--   1 root root      1513 2011-02-15 14:28 ./source/ap/vim/patches/7.3.122.gz
+-rw-r--r--   1 root root       867 2011-02-15 15:34 ./source/ap/vim/patches/7.3.123.gz
+-rw-r--r--   1 root root      2267 2011-02-15 16:40 ./source/ap/vim/patches/7.3.124.gz
+-rw-r--r--   1 root root      1021 2011-02-15 17:07 ./source/ap/vim/patches/7.3.125.gz
+-rw-r--r--   1 root root       822 2011-02-25 13:43 ./source/ap/vim/patches/7.3.126.gz
+-rw-r--r--   1 root root       880 2011-02-25 13:47 ./source/ap/vim/patches/7.3.127.gz
+-rw-r--r--   1 root root       868 2011-02-25 14:12 ./source/ap/vim/patches/7.3.128.gz
+-rw-r--r--   1 root root      1613 2011-02-25 14:14 ./source/ap/vim/patches/7.3.129.gz
+-rw-r--r--   1 root root       909 2011-02-25 14:16 ./source/ap/vim/patches/7.3.130.gz
+-rw-r--r--   1 root root       711 2011-02-25 14:18 ./source/ap/vim/patches/7.3.131.gz
+-rw-r--r--   1 root root      1205 2011-02-25 14:19 ./source/ap/vim/patches/7.3.132.gz
+-rw-r--r--   1 root root      1321 2011-02-25 15:53 ./source/ap/vim/patches/7.3.133.gz
+-rw-r--r--   1 root root       730 2011-02-25 16:11 ./source/ap/vim/patches/7.3.134.gz
+-rw-r--r--   1 root root      1158 2011-02-25 17:42 ./source/ap/vim/patches/7.3.135.gz
+-rw-r--r--   1 root root       887 2011-03-03 14:02 ./source/ap/vim/patches/7.3.136.gz
+-rw-r--r--   1 root root      1258 2011-03-03 14:05 ./source/ap/vim/patches/7.3.137.gz
+-rw-r--r--   1 root root       984 2011-03-03 14:55 ./source/ap/vim/patches/7.3.138.gz
+-rw-r--r--   1 root root      1377 2011-03-22 12:09 ./source/ap/vim/patches/7.3.139.gz
+-rw-r--r--   1 root root       893 2011-03-22 12:30 ./source/ap/vim/patches/7.3.140.gz
+-rw-r--r--   1 root root      1303 2011-03-22 13:36 ./source/ap/vim/patches/7.3.141.gz
+-rw-r--r--   1 root root      1135 2011-03-22 14:49 ./source/ap/vim/patches/7.3.142.gz
+-rw-r--r--   1 root root     11270 2011-03-22 17:12 ./source/ap/vim/patches/7.3.143.gz
+-rw-r--r--   1 root root       993 2011-03-26 12:57 ./source/ap/vim/patches/7.3.144.gz
+-rw-r--r--   1 root root       981 2011-03-26 17:33 ./source/ap/vim/patches/7.3.145.gz
+-rw-r--r--   1 root root      2415 2011-03-27 14:04 ./source/ap/vim/patches/7.3.146.gz
+-rw-r--r--   1 root root       814 2011-04-01 11:07 ./source/ap/vim/patches/7.3.147.gz
+-rw-r--r--   1 root root      2468 2011-04-01 12:46 ./source/ap/vim/patches/7.3.148.gz
+-rw-r--r--   1 root root      1002 2011-04-01 13:35 ./source/ap/vim/patches/7.3.149.gz
+-rw-r--r--   1 root root      1201 2011-04-01 14:08 ./source/ap/vim/patches/7.3.150.gz
+-rw-r--r--   1 root root       937 2011-04-01 14:30 ./source/ap/vim/patches/7.3.151.gz
+-rw-r--r--   1 root root      3970 2011-04-01 17:16 ./source/ap/vim/patches/7.3.152.gz
+-rw-r--r--   1 root root       905 2011-04-02 12:46 ./source/ap/vim/patches/7.3.153.gz
+-rw-r--r--   1 root root      1394 2011-04-02 13:14 ./source/ap/vim/patches/7.3.154.gz
+-rw-r--r--   1 root root      2060 2011-04-11 11:47 ./source/ap/vim/patches/7.3.155.gz
+-rw-r--r--   1 root root      1076 2011-04-11 12:25 ./source/ap/vim/patches/7.3.156.gz
+-rw-r--r--   1 root root       729 2011-04-11 12:27 ./source/ap/vim/patches/7.3.157.gz
+-rw-r--r--   1 root root       817 2011-04-11 12:29 ./source/ap/vim/patches/7.3.158.gz
+-rw-r--r--   1 root root       790 2011-04-11 12:30 ./source/ap/vim/patches/7.3.159.gz
+-rw-r--r--   1 root root      3930 2011-04-11 14:57 ./source/ap/vim/patches/7.3.160.gz
+-rw-r--r--   1 root root      9779 2011-04-11 19:36 ./source/ap/vim/patches/7.3.161.gz
+-rw-r--r--   1 root root      1233 2011-04-21 12:29 ./source/ap/vim/patches/7.3.162.gz
+-rw-r--r--   1 root root       890 2011-04-28 10:58 ./source/ap/vim/patches/7.3.163.gz
+-rw-r--r--   1 root root      1498 2011-04-28 11:02 ./source/ap/vim/patches/7.3.164.gz
+-rw-r--r--   1 root root       838 2011-04-28 15:22 ./source/ap/vim/patches/7.3.165.gz
+-rw-r--r--   1 root root       844 2011-04-28 15:25 ./source/ap/vim/patches/7.3.166.gz
+-rw-r--r--   1 root root      1090 2011-04-28 15:27 ./source/ap/vim/patches/7.3.167.gz
+-rw-r--r--   1 root root      1035 2011-04-28 15:30 ./source/ap/vim/patches/7.3.168.gz
+-rw-r--r--   1 root root      1255 2011-04-28 15:49 ./source/ap/vim/patches/7.3.169.gz
+-rw-r--r--   1 root root       985 2011-04-28 17:05 ./source/ap/vim/patches/7.3.170.gz
+-rw-r--r--   1 root root      1770 2011-05-05 12:27 ./source/ap/vim/patches/7.3.171.gz
+-rw-r--r--   1 root root      2611 2011-05-05 14:41 ./source/ap/vim/patches/7.3.172.gz
+-rw-r--r--   1 root root      1008 2011-05-05 15:14 ./source/ap/vim/patches/7.3.173.gz
+-rw-r--r--   1 root root      1450 2011-05-05 15:24 ./source/ap/vim/patches/7.3.174.gz
+-rw-r--r--   1 root root       811 2011-05-05 15:33 ./source/ap/vim/patches/7.3.175.gz
+-rw-r--r--   1 root root      1634 2011-05-05 16:10 ./source/ap/vim/patches/7.3.176.gz
+-rw-r--r--   1 root root      1271 2011-05-05 16:32 ./source/ap/vim/patches/7.3.177.gz
+-rw-r--r--   1 root root      1533 2011-05-10 09:39 ./source/ap/vim/patches/7.3.178.gz
+-rw-r--r--   1 root root       940 2011-05-10 09:56 ./source/ap/vim/patches/7.3.179.gz
+-rw-r--r--   1 root root      2490 2011-05-10 11:38 ./source/ap/vim/patches/7.3.180.gz
+-rw-r--r--   1 root root      1548 2011-05-10 12:22 ./source/ap/vim/patches/7.3.181.gz
+-rw-r--r--   1 root root       814 2011-05-10 12:43 ./source/ap/vim/patches/7.3.182.gz
+-rw-r--r--   1 root root      1044 2011-05-10 13:41 ./source/ap/vim/patches/7.3.183.gz
+-rw-r--r--   1 root root      1020 2011-05-10 13:51 ./source/ap/vim/patches/7.3.184.gz
+-rw-r--r--   1 root root      1100 2011-05-10 14:00 ./source/ap/vim/patches/7.3.185.gz
+-rw-r--r--   1 root root       886 2011-05-10 14:12 ./source/ap/vim/patches/7.3.186.gz
+-rw-r--r--   1 root root     49452 2011-05-10 14:41 ./source/ap/vim/patches/7.3.187.gz
+-rw-r--r--   1 root root      2284 2011-05-10 15:21 ./source/ap/vim/patches/7.3.188.gz
+-rw-r--r--   1 root root       805 2011-05-10 15:29 ./source/ap/vim/patches/7.3.189.gz
+-rw-r--r--   1 root root       809 2011-05-19 10:15 ./source/ap/vim/patches/7.3.190.gz
+-rw-r--r--   1 root root      4456 2011-05-19 11:43 ./source/ap/vim/patches/7.3.191.gz
+-rw-r--r--   1 root root       853 2011-05-19 12:31 ./source/ap/vim/patches/7.3.192.gz
+-rw-r--r--   1 root root       944 2011-05-19 12:52 ./source/ap/vim/patches/7.3.193.gz
+-rw-r--r--   1 root root       774 2011-05-19 13:01 ./source/ap/vim/patches/7.3.194.gz
+-rw-r--r--   1 root root      1626 2011-05-19 14:36 ./source/ap/vim/patches/7.3.195.gz
+-rw-r--r--   1 root root      2681 2011-05-19 15:26 ./source/ap/vim/patches/7.3.196.gz
+-rw-r--r--   1 root root      1075 2011-05-19 15:44 ./source/ap/vim/patches/7.3.197.gz
+-rw-r--r--   1 root root      3472 2011-05-19 16:27 ./source/ap/vim/patches/7.3.198.gz
+-rw-r--r--   1 root root       887 2011-05-25 10:10 ./source/ap/vim/patches/7.3.199.gz
+-rw-r--r--   1 root root      1005 2011-05-25 10:52 ./source/ap/vim/patches/7.3.200.gz
+-rw-r--r--   1 root root      1323 2011-05-25 11:35 ./source/ap/vim/patches/7.3.201.gz
+-rw-r--r--   1 root root      5762 2011-06-26 01:25 ./source/ap/vim/patches/7.3.202.gz
+-rw-r--r--   1 root root      1485 2011-06-26 01:25 ./source/ap/vim/patches/7.3.203.gz
+-rw-r--r--   1 root root       769 2011-05-25 15:30 ./source/ap/vim/patches/7.3.204.gz
+-rw-r--r--   1 root root      1092 2011-05-25 15:57 ./source/ap/vim/patches/7.3.205.gz
+-rw-r--r--   1 root root       870 2011-05-25 19:19 ./source/ap/vim/patches/7.3.206.gz
+-rw-r--r--   1 root root       841 2011-06-12 18:32 ./source/ap/vim/patches/7.3.207.gz
+-rw-r--r--   1 root root       765 2011-06-12 18:34 ./source/ap/vim/patches/7.3.208.gz
+-rw-r--r--   1 root root      1227 2011-06-12 18:37 ./source/ap/vim/patches/7.3.209.gz
+-rw-r--r--   1 root root      2179 2011-06-12 18:42 ./source/ap/vim/patches/7.3.210.gz
+-rw-r--r--   1 root root       795 2011-06-12 19:26 ./source/ap/vim/patches/7.3.211.gz
+-rw-r--r--   1 root root      2206 2011-06-12 19:37 ./source/ap/vim/patches/7.3.212.gz
+-rw-r--r--   1 root root      1239 2011-06-12 19:51 ./source/ap/vim/patches/7.3.213.gz
+-rw-r--r--   1 root root       821 2011-06-12 20:04 ./source/ap/vim/patches/7.3.214.gz
+-rw-r--r--   1 root root       990 2011-06-12 20:14 ./source/ap/vim/patches/7.3.215.gz
+-rw-r--r--   1 root root      2368 2011-06-12 23:08 ./source/ap/vim/patches/7.3.216.gz
+-rw-r--r--   1 root root       935 2011-06-12 23:20 ./source/ap/vim/patches/7.3.217.gz
+-rw-r--r--   1 root root      1173 2011-06-12 23:34 ./source/ap/vim/patches/7.3.218.gz
+-rw-r--r--   1 root root      1271 2011-06-13 00:04 ./source/ap/vim/patches/7.3.219.gz
+-rw-r--r--   1 root root      8900 2011-06-18 22:29 ./source/ap/vim/patches/7.3.220.gz
+-rw-r--r--   1 root root      2560 2011-06-18 23:16 ./source/ap/vim/patches/7.3.221.gz
+-rw-r--r--   1 root root       887 2011-06-18 23:28 ./source/ap/vim/patches/7.3.222.gz
+-rw-r--r--   1 root root      3057 2011-06-26 01:25 ./source/ap/vim/patches/7.3.223.gz
+-rw-r--r--   1 root root      2035 2011-06-19 00:56 ./source/ap/vim/patches/7.3.224.gz
+-rw-r--r--   1 root root      3785 2011-06-19 02:33 ./source/ap/vim/patches/7.3.225.gz
+-rw-r--r--   1 root root       876 2011-06-19 02:54 ./source/ap/vim/patches/7.3.226.gz
+-rw-r--r--   1 root root      1421 2011-06-19 22:26 ./source/ap/vim/patches/7.3.227.gz
+-rw-r--r--   1 root root       777 2011-06-19 22:46 ./source/ap/vim/patches/7.3.228.gz
+-rw-r--r--   1 root root       855 2011-06-19 22:54 ./source/ap/vim/patches/7.3.229.gz
+-rw-r--r--   1 root root       933 2011-06-20 03:03 ./source/ap/vim/patches/7.3.230.gz
+-rw-r--r--   1 root root      2237 2011-06-26 01:25 ./source/ap/vim/patches/7.3.231.gz
+-rw-r--r--   1 root root      1044 2011-06-26 02:02 ./source/ap/vim/patches/7.3.232.gz
+-rw-r--r--   1 root root      1080 2011-06-26 02:26 ./source/ap/vim/patches/7.3.233.gz
+-rw-r--r--   1 root root      1893 2011-06-26 02:49 ./source/ap/vim/patches/7.3.234.gz
+-rw-r--r--   1 root root      3021 2011-06-26 03:37 ./source/ap/vim/patches/7.3.235.gz
+-rw-r--r--   1 root root      1098 2011-06-26 17:14 ./source/ap/vim/patches/7.3.236.gz
+-rw-r--r--   1 root root      2127 2011-06-26 17:41 ./source/ap/vim/patches/7.3.237.gz
+-rw-r--r--   1 root root       798 2011-07-07 13:05 ./source/ap/vim/patches/7.3.238.gz
+-rw-r--r--   1 root root      2496 2011-07-07 13:09 ./source/ap/vim/patches/7.3.239.gz
+-rw-r--r--   1 root root      7253 2011-07-07 14:21 ./source/ap/vim/patches/7.3.240.gz
+-rw-r--r--   1 root root       928 2011-07-07 14:44 ./source/ap/vim/patches/7.3.241.gz
+-rw-r--r--   1 root root       947 2011-07-07 15:15 ./source/ap/vim/patches/7.3.242.gz
+-rw-r--r--   1 root root       796 2011-07-07 15:37 ./source/ap/vim/patches/7.3.243.gz
+-rw-r--r--   1 root root       851 2011-07-07 15:43 ./source/ap/vim/patches/7.3.244.gz
+-rw-r--r--   1 root root      1188 2011-07-15 11:11 ./source/ap/vim/patches/7.3.245.gz
+-rw-r--r--   1 root root       970 2011-07-15 11:32 ./source/ap/vim/patches/7.3.246.gz
+-rw-r--r--   1 root root      1229 2011-07-15 11:35 ./source/ap/vim/patches/7.3.247.gz
+-rw-r--r--   1 root root      2019 2011-07-15 11:53 ./source/ap/vim/patches/7.3.248.gz
+-rw-r--r--   1 root root      1372 2011-07-15 12:13 ./source/ap/vim/patches/7.3.249.gz
+-rw-r--r--   1 root root      1292 2011-07-15 13:55 ./source/ap/vim/patches/7.3.250.gz
+-rw-r--r--   1 root root      1588 2011-07-15 15:52 ./source/ap/vim/patches/7.3.251.gz
+-rw-r--r--   1 root root       654 2011-07-15 15:57 ./source/ap/vim/patches/7.3.252.gz
+-rw-r--r--   1 root root      4690 2011-07-15 19:18 ./source/ap/vim/patches/7.3.253.gz
+-rw-r--r--   1 root root       738 2011-07-15 19:25 ./source/ap/vim/patches/7.3.254.gz
+-rw-r--r--   1 root root      1226 2011-07-20 13:06 ./source/ap/vim/patches/7.3.255.gz
+-rw-r--r--   1 root root      1555 2011-07-20 13:10 ./source/ap/vim/patches/7.3.256.gz
+-rw-r--r--   1 root root      1421 2011-07-20 14:38 ./source/ap/vim/patches/7.3.257.gz
+-rw-r--r--   1 root root      1041 2011-07-20 15:29 ./source/ap/vim/patches/7.3.258.gz
+-rw-r--r--   1 root root      5118 2011-07-20 16:31 ./source/ap/vim/patches/7.3.259.gz
+-rw-r--r--   1 root root      1097 2011-07-20 16:31 ./source/ap/vim/patches/7.3.260.gz
+-rw-r--r--   1 root root       985 2011-07-27 12:10 ./source/ap/vim/patches/7.3.261.gz
+-rw-r--r--   1 root root      6116 2011-07-27 12:10 ./source/ap/vim/patches/7.3.262.gz
+-rw-r--r--   1 root root      1535 2011-07-27 12:16 ./source/ap/vim/patches/7.3.263.gz
+-rw-r--r--   1 root root      1936 2011-07-27 15:33 ./source/ap/vim/patches/7.3.264.gz
+-rw-r--r--   1 root root      1437 2011-07-27 16:00 ./source/ap/vim/patches/7.3.265.gz
+-rw-r--r--   1 root root       890 2011-07-27 16:26 ./source/ap/vim/patches/7.3.266.gz
+-rw-r--r--   1 root root       883 2011-08-04 17:36 ./source/ap/vim/patches/7.3.267.gz
+-rw-r--r--   1 root root       977 2011-08-04 18:32 ./source/ap/vim/patches/7.3.268.gz
+-rw-r--r--   1 root root      1274 2011-08-04 18:32 ./source/ap/vim/patches/7.3.269.gz
+-rw-r--r--   1 root root       743 2011-08-10 10:12 ./source/ap/vim/patches/7.3.270.gz
+-rw-r--r--   1 root root      3354 2011-08-10 10:20 ./source/ap/vim/patches/7.3.271.gz
+-rw-r--r--   1 root root       816 2011-08-10 10:39 ./source/ap/vim/patches/7.3.272.gz
+-rw-r--r--   1 root root      1549 2011-08-10 11:22 ./source/ap/vim/patches/7.3.273.gz
+-rw-r--r--   1 root root       901 2011-08-10 12:33 ./source/ap/vim/patches/7.3.274.gz
+-rw-r--r--   1 root root      1112 2011-08-10 13:57 ./source/ap/vim/patches/7.3.275.gz
+-rw-r--r--   1 root root      1399 2011-08-10 14:32 ./source/ap/vim/patches/7.3.276.gz
+-rw-r--r--   1 root root      2497 2011-08-10 15:08 ./source/ap/vim/patches/7.3.277.gz
+-rw-r--r--   1 root root      1002 2011-08-10 15:26 ./source/ap/vim/patches/7.3.278.gz
+-rw-r--r--   1 root root      1512 2011-08-10 15:45 ./source/ap/vim/patches/7.3.279.gz
+-rw-r--r--   1 root root      1701 2011-08-10 16:37 ./source/ap/vim/patches/7.3.280.gz
+-rw-r--r--   1 root root      1411 2011-08-17 13:25 ./source/ap/vim/patches/7.3.281.gz
+-rw-r--r--   1 root root       933 2011-08-17 14:27 ./source/ap/vim/patches/7.3.282.gz
+-rw-r--r--   1 root root      1406 2011-08-17 15:19 ./source/ap/vim/patches/7.3.283.gz
+-rw-r--r--   1 root root      2150 2011-08-17 18:34 ./source/ap/vim/patches/7.3.284.gz
+-rw-r--r--   1 root root      1630 2011-08-19 20:30 ./source/ap/vim/patches/7.3.285.gz
+-rw-r--r--   1 root root      1080 2011-08-26 14:14 ./source/ap/vim/patches/7.3.286.gz
+-rw-r--r--   1 root root      1288 2011-08-27 13:11 ./source/ap/vim/patches/7.3.287.gz
+-rw-r--r--   1 root root      1022 2011-08-28 14:01 ./source/ap/vim/patches/7.3.288.gz
+-rw-r--r--   1 root root       926 2011-08-28 14:03 ./source/ap/vim/patches/7.3.289.gz
+-rw-r--r--   1 root root      1226 2011-09-02 09:57 ./source/ap/vim/patches/7.3.290.gz
+-rw-r--r--   1 root root      1366 2011-09-02 10:28 ./source/ap/vim/patches/7.3.291.gz
+-rw-r--r--   1 root root       869 2011-09-02 12:09 ./source/ap/vim/patches/7.3.292.gz
+-rw-r--r--   1 root root      1098 2011-09-05 17:54 ./source/ap/vim/patches/7.3.293.gz
+-rw-r--r--   1 root root      1096 2011-09-05 18:14 ./source/ap/vim/patches/7.3.294.gz
+-rw-r--r--   1 root root      1456 2011-09-07 12:07 ./source/ap/vim/patches/7.3.295.gz
+-rw-r--r--   1 root root      2121 2011-09-07 13:05 ./source/ap/vim/patches/7.3.296.gz
+-rw-r--r--   1 root root      1483 2011-09-07 16:48 ./source/ap/vim/patches/7.3.297.gz
+-rw-r--r--   1 root root      1345 2011-09-07 16:59 ./source/ap/vim/patches/7.3.298.gz
+-rw-r--r--   1 root root      2977 2011-09-07 17:09 ./source/ap/vim/patches/7.3.299.gz
+-rw-r--r--   1 root root      1015 2011-09-07 17:31 ./source/ap/vim/patches/7.3.300.gz
+-rw-r--r--   1 root root      1225 2011-09-07 17:59 ./source/ap/vim/patches/7.3.301.gz
+-rw-r--r--   1 root root      1061 2011-09-08 21:23 ./source/ap/vim/patches/7.3.302.gz
+-rw-r--r--   1 root root       870 2011-09-08 21:25 ./source/ap/vim/patches/7.3.303.gz
+-rw-r--r--   1 root root      1280 2011-09-14 08:50 ./source/ap/vim/patches/7.3.304.gz
+-rw-r--r--   1 root root       903 2011-09-14 12:34 ./source/ap/vim/patches/7.3.305.gz
+-rw-r--r--   1 root root      2314 2011-09-14 12:44 ./source/ap/vim/patches/7.3.306.gz
+-rw-r--r--   1 root root      1588 2011-09-14 13:02 ./source/ap/vim/patches/7.3.307.gz
+-rw-r--r--   1 root root      2405 2011-09-14 13:40 ./source/ap/vim/patches/7.3.308.gz
+-rw-r--r--   1 root root       963 2011-09-14 13:42 ./source/ap/vim/patches/7.3.309.gz
+-rw-r--r--   1 root root     17122 2011-09-14 14:06 ./source/ap/vim/patches/7.3.310.gz
+-rw-r--r--   1 root root      3379 2011-09-14 14:52 ./source/ap/vim/patches/7.3.311.gz
+-rw-r--r--   1 root root       884 2011-09-14 15:50 ./source/ap/vim/patches/7.3.312.gz
+-rw-r--r--   1 root root       866 2011-09-14 17:01 ./source/ap/vim/patches/7.3.313.gz
+-rw-r--r--   1 root root       845 2011-09-14 17:02 ./source/ap/vim/patches/7.3.314.gz
+-rw-r--r--   1 root root      4399 2011-09-14 17:05 ./source/ap/vim/patches/7.3.315.gz
+-rw-r--r--   1 root root       831 2011-09-21 11:41 ./source/ap/vim/patches/7.3.316.gz
+-rw-r--r--   1 root root      1575 2011-09-21 15:16 ./source/ap/vim/patches/7.3.317.gz
+-rw-r--r--   1 root root      1111 2011-09-21 15:34 ./source/ap/vim/patches/7.3.318.gz
+-rw-r--r--   1 root root      1905 2011-09-21 16:23 ./source/ap/vim/patches/7.3.319.gz
+-rw-r--r--   1 root root      1528 2011-09-21 17:12 ./source/ap/vim/patches/7.3.320.gz
+-rw-r--r--   1 root root      2230 2011-09-21 18:06 ./source/ap/vim/patches/7.3.321.gz
+-rw-r--r--   1 root root       785 2011-09-21 18:10 ./source/ap/vim/patches/7.3.322.gz
+-rw-r--r--   1 root root       968 2011-09-30 12:46 ./source/ap/vim/patches/7.3.323.gz
+-rw-r--r--   1 root root       825 2011-09-30 14:24 ./source/ap/vim/patches/7.3.324.gz
+-rw-r--r--   1 root root       982 2011-09-30 14:41 ./source/ap/vim/patches/7.3.325.gz
+-rw-r--r--   1 root root      2590 2011-09-30 14:57 ./source/ap/vim/patches/7.3.326.gz
+-rw-r--r--   1 root root       997 2011-09-30 15:31 ./source/ap/vim/patches/7.3.327.gz
+-rw-r--r--   1 root root       777 2011-09-30 15:47 ./source/ap/vim/patches/7.3.328.gz
+-rw-r--r--   1 root root      1025 2011-09-30 16:37 ./source/ap/vim/patches/7.3.329.gz
+-rw-r--r--   1 root root       749 2011-10-04 14:45 ./source/ap/vim/patches/7.3.330.gz
+-rw-r--r--   1 root root       869 2011-10-04 15:02 ./source/ap/vim/patches/7.3.331.gz
+-rw-r--r--   1 root root      1734 2011-10-04 16:06 ./source/ap/vim/patches/7.3.332.gz
+-rw-r--r--   1 root root      1894 2011-10-04 19:24 ./source/ap/vim/patches/7.3.333.gz
+-rw-r--r--   1 root root       822 2011-10-12 12:13 ./source/ap/vim/patches/7.3.334.gz
+-rw-r--r--   1 root root       823 2011-10-12 14:58 ./source/ap/vim/patches/7.3.335.gz
+-rw-r--r--   1 root root      6762 2012-04-11 18:43 ./source/ap/vim/patches/7.3.336.gz
+-rw-r--r--   1 root root      1017 2011-10-12 19:05 ./source/ap/vim/patches/7.3.337.gz
+-rw-r--r--   1 root root      1178 2011-10-12 20:03 ./source/ap/vim/patches/7.3.338.gz
+-rw-r--r--   1 root root       835 2011-10-20 14:36 ./source/ap/vim/patches/7.3.339.gz
+-rw-r--r--   1 root root       848 2011-10-20 16:13 ./source/ap/vim/patches/7.3.340.gz
+-rw-r--r--   1 root root      2918 2011-10-20 16:19 ./source/ap/vim/patches/7.3.341.gz
+-rw-r--r--   1 root root      1212 2011-10-20 16:25 ./source/ap/vim/patches/7.3.342.gz
+-rw-r--r--   1 root root      2274 2011-10-20 19:10 ./source/ap/vim/patches/7.3.343.gz
+-rw-r--r--   1 root root      1312 2011-10-20 19:29 ./source/ap/vim/patches/7.3.344.gz
+-rw-r--r--   1 root root       758 2011-10-20 19:42 ./source/ap/vim/patches/7.3.345.gz
+-rw-r--r--   1 root root      1982 2011-10-20 19:59 ./source/ap/vim/patches/7.3.346.gz
+-rw-r--r--   1 root root       857 2011-10-26 09:38 ./source/ap/vim/patches/7.3.347.gz
+-rw-r--r--   1 root root       838 2011-10-26 09:42 ./source/ap/vim/patches/7.3.348.gz
+-rw-r--r--   1 root root      1256 2011-10-26 09:45 ./source/ap/vim/patches/7.3.349.gz
+-rw-r--r--   1 root root       758 2011-10-26 11:23 ./source/ap/vim/patches/7.3.350.gz
+-rw-r--r--   1 root root       797 2011-10-26 15:06 ./source/ap/vim/patches/7.3.351.gz
+-rw-r--r--   1 root root      1472 2011-10-26 20:04 ./source/ap/vim/patches/7.3.352.gz
+-rw-r--r--   1 root root      1702 2011-10-26 21:49 ./source/ap/vim/patches/7.3.353.gz
+-rw-r--r--   1 root root      1031 2011-11-30 10:17 ./source/ap/vim/patches/7.3.354.gz
+-rw-r--r--   1 root root       804 2011-11-30 10:32 ./source/ap/vim/patches/7.3.355.gz
+-rw-r--r--   1 root root      1092 2011-11-30 12:05 ./source/ap/vim/patches/7.3.356.gz
+-rw-r--r--   1 root root       789 2011-11-30 12:43 ./source/ap/vim/patches/7.3.357.gz
+-rw-r--r--   1 root root       941 2011-11-30 13:48 ./source/ap/vim/patches/7.3.358.gz
+-rw-r--r--   1 root root       879 2011-11-30 13:59 ./source/ap/vim/patches/7.3.359.gz
+-rw-r--r--   1 root root      1008 2011-11-30 14:42 ./source/ap/vim/patches/7.3.360.gz
+-rw-r--r--   1 root root       856 2011-11-30 14:42 ./source/ap/vim/patches/7.3.361.gz
+-rw-r--r--   1 root root       888 2011-11-30 16:03 ./source/ap/vim/patches/7.3.362.gz
+-rw-r--r--   1 root root      1292 2011-11-30 16:21 ./source/ap/vim/patches/7.3.363.gz
+-rw-r--r--   1 root root       893 2011-12-01 20:00 ./source/ap/vim/patches/7.3.364.gz
+-rw-r--r--   1 root root      1223 2011-12-08 14:11 ./source/ap/vim/patches/7.3.365.gz
+-rw-r--r--   1 root root       991 2011-12-08 14:13 ./source/ap/vim/patches/7.3.366.gz
+-rw-r--r--   1 root root       834 2011-12-08 14:15 ./source/ap/vim/patches/7.3.367.gz
+-rw-r--r--   1 root root      1416 2011-12-08 14:18 ./source/ap/vim/patches/7.3.368.gz
+-rw-r--r--   1 root root       824 2011-12-08 14:59 ./source/ap/vim/patches/7.3.369.gz
+-rw-r--r--   1 root root       851 2011-12-08 15:01 ./source/ap/vim/patches/7.3.370.gz
+-rw-r--r--   1 root root      1119 2011-12-08 16:50 ./source/ap/vim/patches/7.3.371.gz
+-rw-r--r--   1 root root       882 2011-12-08 17:45 ./source/ap/vim/patches/7.3.372.gz
+-rw-r--r--   1 root root      1188 2011-12-14 13:40 ./source/ap/vim/patches/7.3.373.gz
+-rw-r--r--   1 root root       779 2011-12-14 13:51 ./source/ap/vim/patches/7.3.374.gz
+-rw-r--r--   1 root root       878 2011-12-14 14:08 ./source/ap/vim/patches/7.3.375.gz
+-rw-r--r--   1 root root       960 2011-12-14 20:28 ./source/ap/vim/patches/7.3.376.gz
+-rw-r--r--   1 root root      3730 2011-12-14 20:19 ./source/ap/vim/patches/7.3.377.gz
+-rw-r--r--   1 root root      1087 2011-12-14 18:23 ./source/ap/vim/patches/7.3.378.gz
+-rw-r--r--   1 root root       915 2011-12-14 19:06 ./source/ap/vim/patches/7.3.379.gz
+-rw-r--r--   1 root root      2191 2011-12-14 19:22 ./source/ap/vim/patches/7.3.380.gz
+-rw-r--r--   1 root root      2558 2011-12-14 19:52 ./source/ap/vim/patches/7.3.381.gz
+-rw-r--r--   1 root root      1613 2011-12-15 20:53 ./source/ap/vim/patches/7.3.382.gz
+-rw-r--r--   1 root root       743 2011-12-23 11:48 ./source/ap/vim/patches/7.3.383.gz
+-rw-r--r--   1 root root       808 2011-12-23 12:16 ./source/ap/vim/patches/7.3.384.gz
+-rw-r--r--   1 root root      1116 2011-12-23 13:55 ./source/ap/vim/patches/7.3.385.gz
+-rw-r--r--   1 root root       823 2011-12-23 13:57 ./source/ap/vim/patches/7.3.386.gz
+-rw-r--r--   1 root root       765 2011-12-30 12:10 ./source/ap/vim/patches/7.3.387.gz
+-rw-r--r--   1 root root       763 2011-12-30 12:40 ./source/ap/vim/patches/7.3.388.gz
+-rw-r--r--   1 root root       905 2011-12-30 13:15 ./source/ap/vim/patches/7.3.389.gz
+-rw-r--r--   1 root root      1519 2011-12-30 14:02 ./source/ap/vim/patches/7.3.390.gz
+-rw-r--r--   1 root root       839 2012-01-04 13:36 ./source/ap/vim/patches/7.3.391.gz
+-rw-r--r--   1 root root      1659 2012-01-04 18:35 ./source/ap/vim/patches/7.3.392.gz
+-rw-r--r--   1 root root      1662 2012-01-04 19:30 ./source/ap/vim/patches/7.3.393.gz
+-rw-r--r--   1 root root       914 2012-01-10 11:43 ./source/ap/vim/patches/7.3.394.gz
+-rw-r--r--   1 root root      1265 2012-01-10 12:45 ./source/ap/vim/patches/7.3.395.gz
+-rw-r--r--   1 root root       815 2012-01-10 12:48 ./source/ap/vim/patches/7.3.396.gz
+-rw-r--r--   1 root root      2357 2012-01-10 15:29 ./source/ap/vim/patches/7.3.397.gz
+-rw-r--r--   1 root root       914 2012-01-10 16:15 ./source/ap/vim/patches/7.3.398.gz
+-rw-r--r--   1 root root      1340 2012-01-10 17:38 ./source/ap/vim/patches/7.3.399.gz
+-rw-r--r--   1 root root     10089 2012-01-10 21:27 ./source/ap/vim/patches/7.3.400.gz
+-rw-r--r--   1 root root      1807 2012-01-10 21:32 ./source/ap/vim/patches/7.3.401.gz
+-rw-r--r--   1 root root       936 2012-01-20 12:29 ./source/ap/vim/patches/7.3.402.gz
+-rw-r--r--   1 root root      1253 2012-01-20 12:39 ./source/ap/vim/patches/7.3.403.gz
+-rw-r--r--   1 root root      1232 2012-01-20 13:33 ./source/ap/vim/patches/7.3.404.gz
+-rw-r--r--   1 root root      1231 2012-01-20 16:16 ./source/ap/vim/patches/7.3.405.gz
+-rw-r--r--   1 root root      1387 2012-01-20 16:58 ./source/ap/vim/patches/7.3.406.gz
+-rw-r--r--   1 root root      2188 2012-01-20 19:46 ./source/ap/vim/patches/7.3.407.gz
+-rw-r--r--   1 root root       790 2012-01-20 19:55 ./source/ap/vim/patches/7.3.408.gz
+-rw-r--r--   1 root root       871 2012-01-20 20:14 ./source/ap/vim/patches/7.3.409.gz
+-rw-r--r--   1 root root       723 2012-01-23 19:50 ./source/ap/vim/patches/7.3.410.gz
+-rw-r--r--   1 root root       864 2012-01-26 10:45 ./source/ap/vim/patches/7.3.411.gz
+-rw-r--r--   1 root root       745 2012-01-26 10:46 ./source/ap/vim/patches/7.3.412.gz
+-rw-r--r--   1 root root      1028 2012-01-26 12:03 ./source/ap/vim/patches/7.3.413.gz
+-rw-r--r--   1 root root       946 2012-01-26 12:41 ./source/ap/vim/patches/7.3.414.gz
+-rw-r--r--   1 root root       847 2012-01-26 13:34 ./source/ap/vim/patches/7.3.415.gz
+-rw-r--r--   1 root root       831 2012-01-26 14:46 ./source/ap/vim/patches/7.3.416.gz
+-rw-r--r--   1 root root       805 2012-01-26 18:03 ./source/ap/vim/patches/7.3.417.gz
+-rw-r--r--   1 root root       903 2012-01-26 18:00 ./source/ap/vim/patches/7.3.418.gz
+-rw-r--r--   1 root root      1055 2012-01-26 19:43 ./source/ap/vim/patches/7.3.419.gz
+-rw-r--r--   1 root root       938 2012-01-26 19:59 ./source/ap/vim/patches/7.3.420.gz
+-rw-r--r--   1 root root       968 2012-01-28 17:05 ./source/ap/vim/patches/7.3.421.gz
+-rw-r--r--   1 root root      1314 2012-02-04 19:19 ./source/ap/vim/patches/7.3.422.gz
+-rw-r--r--   1 root root      1722 2012-02-04 21:00 ./source/ap/vim/patches/7.3.423.gz
+-rw-r--r--   1 root root      1164 2012-02-04 21:02 ./source/ap/vim/patches/7.3.424.gz
+-rw-r--r--   1 root root      1155 2012-02-04 21:45 ./source/ap/vim/patches/7.3.425.gz
+-rw-r--r--   1 root root      2432 2012-02-04 22:36 ./source/ap/vim/patches/7.3.426.gz
+-rw-r--r--   1 root root      3550 2012-02-10 04:11 ./source/ap/vim/patches/7.3.427.gz
+-rw-r--r--   1 root root      1244 2012-02-04 23:49 ./source/ap/vim/patches/7.3.428.gz
+-rw-r--r--   1 root root      1956 2012-02-05 00:20 ./source/ap/vim/patches/7.3.429.gz
+-rw-r--r--   1 root root      1248 2012-02-05 19:11 ./source/ap/vim/patches/7.3.430.gz
+-rw-r--r--   1 root root      2809 2012-02-05 21:06 ./source/ap/vim/patches/7.3.431.gz
+-rw-r--r--   1 root root      2267 2012-02-05 21:52 ./source/ap/vim/patches/7.3.432.gz
+-rw-r--r--   1 root root      1117 2012-02-05 22:11 ./source/ap/vim/patches/7.3.433.gz
+-rw-r--r--   1 root root      2141 2012-02-05 23:14 ./source/ap/vim/patches/7.3.434.gz
+-rw-r--r--   1 root root       893 2012-02-11 19:43 ./source/ap/vim/patches/7.3.435.gz
+-rw-r--r--   1 root root      1138 2012-02-11 19:45 ./source/ap/vim/patches/7.3.436.gz
+-rw-r--r--   1 root root      1062 2012-02-11 22:46 ./source/ap/vim/patches/7.3.437.gz
+-rw-r--r--   1 root root      1606 2012-02-11 23:20 ./source/ap/vim/patches/7.3.438.gz
+-rw-r--r--   1 root root       962 2012-02-11 23:32 ./source/ap/vim/patches/7.3.439.gz
+-rw-r--r--   1 root root      1840 2012-02-12 00:36 ./source/ap/vim/patches/7.3.440.gz
+-rw-r--r--   1 root root      3265 2012-02-12 00:56 ./source/ap/vim/patches/7.3.441.gz
+-rw-r--r--   1 root root      2059 2012-02-12 19:22 ./source/ap/vim/patches/7.3.442.gz
+-rw-r--r--   1 root root      2660 2012-02-12 22:24 ./source/ap/vim/patches/7.3.443.gz
+-rw-r--r--   1 root root      1189 2012-02-12 23:02 ./source/ap/vim/patches/7.3.444.gz
+-rw-r--r--   1 root root      2184 2012-02-19 17:20 ./source/ap/vim/patches/7.3.445.gz
+-rw-r--r--   1 root root      2087 2012-02-20 21:20 ./source/ap/vim/patches/7.3.446.gz
+-rw-r--r--   1 root root      3279 2012-02-21 20:24 ./source/ap/vim/patches/7.3.447.gz
+-rw-r--r--   1 root root      1970 2012-02-22 12:08 ./source/ap/vim/patches/7.3.448.gz
+-rw-r--r--   1 root root      3785 2012-02-22 13:59 ./source/ap/vim/patches/7.3.449.gz
+-rw-r--r--   1 root root       989 2012-02-22 14:42 ./source/ap/vim/patches/7.3.450.gz
+-rw-r--r--   1 root root      3415 2012-02-22 15:03 ./source/ap/vim/patches/7.3.451.gz
+-rw-r--r--   1 root root      1038 2012-02-22 16:39 ./source/ap/vim/patches/7.3.452.gz
+-rw-r--r--   1 root root       837 2012-02-22 16:59 ./source/ap/vim/patches/7.3.453.gz
+-rw-r--r--   1 root root       975 2012-02-22 17:13 ./source/ap/vim/patches/7.3.454.gz
+-rw-r--r--   1 root root       867 2012-02-22 17:30 ./source/ap/vim/patches/7.3.455.gz
+-rw-r--r--   1 root root      3031 2012-02-22 18:14 ./source/ap/vim/patches/7.3.456.gz
+-rw-r--r--   1 root root      1057 2012-02-29 12:50 ./source/ap/vim/patches/7.3.457.gz
+-rw-r--r--   1 root root       737 2012-02-29 12:52 ./source/ap/vim/patches/7.3.458.gz
+-rw-r--r--   1 root root       907 2012-02-29 12:59 ./source/ap/vim/patches/7.3.459.gz
+-rw-r--r--   1 root root      1284 2012-02-29 15:58 ./source/ap/vim/patches/7.3.460.gz
+-rw-r--r--   1 root root      2478 2012-02-29 17:25 ./source/ap/vim/patches/7.3.461.gz
+-rw-r--r--   1 root root      1639 2012-02-29 18:20 ./source/ap/vim/patches/7.3.462.gz
+-rw-r--r--   1 root root       904 2012-03-07 13:59 ./source/ap/vim/patches/7.3.463.gz
+-rw-r--r--   1 root root       861 2012-03-07 17:05 ./source/ap/vim/patches/7.3.464.gz
+-rw-r--r--   1 root root      3895 2012-03-07 18:20 ./source/ap/vim/patches/7.3.465.gz
+-rw-r--r--   1 root root       882 2012-03-07 18:32 ./source/ap/vim/patches/7.3.466.gz
+-rw-r--r--   1 root root       773 2012-03-07 18:40 ./source/ap/vim/patches/7.3.467.gz
+-rw-r--r--   1 root root      1641 2012-03-07 19:14 ./source/ap/vim/patches/7.3.468.gz
+-rw-r--r--   1 root root       776 2012-03-07 21:53 ./source/ap/vim/patches/7.3.469.gz
+-rw-r--r--   1 root root       878 2012-03-07 21:56 ./source/ap/vim/patches/7.3.470.gz
+-rw-r--r--   1 root root      1180 2012-03-16 13:33 ./source/ap/vim/patches/7.3.471.gz
+-rw-r--r--   1 root root      1358 2012-03-16 18:09 ./source/ap/vim/patches/7.3.472.gz
+-rw-r--r--   1 root root       970 2012-03-16 18:25 ./source/ap/vim/patches/7.3.473.gz
+-rw-r--r--   1 root root       842 2012-03-16 18:36 ./source/ap/vim/patches/7.3.474.gz
+-rw-r--r--   1 root root      1168 2012-03-16 19:18 ./source/ap/vim/patches/7.3.475.gz
+-rw-r--r--   1 root root       894 2012-03-23 13:17 ./source/ap/vim/patches/7.3.476.gz
+-rw-r--r--   1 root root       910 2012-03-23 14:23 ./source/ap/vim/patches/7.3.477.gz
+-rw-r--r--   1 root root       729 2012-03-23 14:38 ./source/ap/vim/patches/7.3.478.gz
+-rw-r--r--   1 root root      1986 2012-03-23 15:27 ./source/ap/vim/patches/7.3.479.gz
+-rw-r--r--   1 root root      2207 2012-03-23 17:43 ./source/ap/vim/patches/7.3.480.gz
+-rw-r--r--   1 root root      1036 2012-03-28 11:01 ./source/ap/vim/patches/7.3.481.gz
+-rw-r--r--   1 root root       894 2012-03-28 12:21 ./source/ap/vim/patches/7.3.482.gz
+-rw-r--r--   1 root root      1338 2012-03-28 14:50 ./source/ap/vim/patches/7.3.483.gz
+-rw-r--r--   1 root root      1098 2012-03-28 15:11 ./source/ap/vim/patches/7.3.484.gz
+-rw-r--r--   1 root root       834 2012-03-28 15:18 ./source/ap/vim/patches/7.3.485.gz
+-rw-r--r--   1 root root       846 2012-03-28 15:44 ./source/ap/vim/patches/7.3.486.gz
+-rw-r--r--   1 root root      4142 2012-03-30 20:12 ./source/ap/vim/patches/7.3.487.gz
+-rw-r--r--   1 root root       764 2012-04-05 14:06 ./source/ap/vim/patches/7.3.488.gz
+-rw-r--r--   1 root root      1173 2012-04-05 14:08 ./source/ap/vim/patches/7.3.489.gz
+-rw-r--r--   1 root root     14404 2012-04-05 14:55 ./source/ap/vim/patches/7.3.490.gz
+-rw-r--r--   1 root root      2271 2012-04-05 14:57 ./source/ap/vim/patches/7.3.491.gz
+-rw-r--r--   1 root root      3584 2012-04-05 15:18 ./source/ap/vim/patches/7.3.492.gz
+-rw-r--r--   1 root root       822 2012-04-06 11:57 ./source/ap/vim/patches/7.3.493.gz
+-rw-r--r--   1 root root      1743 2012-04-06 12:32 ./source/ap/vim/patches/7.3.494.gz
+-rw-r--r--   1 root root      1377 2012-04-09 18:43 ./source/ap/vim/patches/7.3.495.gz
+-rw-r--r--   1 root root       948 2012-04-13 17:13 ./source/ap/vim/patches/7.3.496.gz
+-rw-r--r--   1 root root       907 2012-04-20 11:32 ./source/ap/vim/patches/7.3.497.gz
+-rw-r--r--   1 root root       954 2012-04-20 11:47 ./source/ap/vim/patches/7.3.498.gz
+-rw-r--r--   1 root root      1118 2012-04-20 13:56 ./source/ap/vim/patches/7.3.499.gz
+-rw-r--r--   1 root root       757 2012-04-20 14:14 ./source/ap/vim/patches/7.3.500.gz
+-rw-r--r--   1 root root       877 2012-04-20 16:07 ./source/ap/vim/patches/7.3.501.gz
+-rw-r--r--   1 root root       882 2012-04-20 17:48 ./source/ap/vim/patches/7.3.502.gz
+-rw-r--r--   1 root root       657 2012-04-25 10:29 ./source/ap/vim/patches/7.3.503.gz
+-rw-r--r--   1 root root      1091 2012-04-25 10:59 ./source/ap/vim/patches/7.3.504.gz
+-rw-r--r--   1 root root      1445 2012-04-25 14:51 ./source/ap/vim/patches/7.3.505.gz
+-rw-r--r--   1 root root      1469 2012-04-25 15:10 ./source/ap/vim/patches/7.3.506.gz
+-rw-r--r--   1 root root      1923 2012-04-25 15:33 ./source/ap/vim/patches/7.3.507.gz
+-rw-r--r--   1 root root      1302 2012-04-25 16:25 ./source/ap/vim/patches/7.3.508.gz
+-rw-r--r--   1 root root      2528 2012-04-25 16:58 ./source/ap/vim/patches/7.3.509.gz
+-rw-r--r--   1 root root       741 2012-04-30 09:35 ./source/ap/vim/patches/7.3.510.gz
+-rw-r--r--   1 root root       816 2012-04-30 15:05 ./source/ap/vim/patches/7.3.511.gz
+-rw-r--r--   1 root root       947 2012-04-30 15:37 ./source/ap/vim/patches/7.3.512.gz
+-rw-r--r--   1 root root      1446 2012-04-30 16:19 ./source/ap/vim/patches/7.3.513.gz
+-rw-r--r--   1 root root      2720 2012-04-30 16:49 ./source/ap/vim/patches/7.3.514.gz
+-rw-r--r--   1 root root      1049 2012-04-30 19:10 ./source/ap/vim/patches/7.3.515.gz
+-rw-r--r--   1 root root      1188 2012-05-18 10:12 ./source/ap/vim/patches/7.3.516.gz
+-rw-r--r--   1 root root       905 2012-05-18 10:51 ./source/ap/vim/patches/7.3.517.gz
+-rw-r--r--   1 root root       919 2012-05-18 14:26 ./source/ap/vim/patches/7.3.518.gz
+-rw-r--r--   1 root root       871 2012-05-18 14:36 ./source/ap/vim/patches/7.3.519.gz
+-rw-r--r--   1 root root      1705 2012-05-18 15:04 ./source/ap/vim/patches/7.3.520.gz
+-rw-r--r--   1 root root      1250 2012-05-18 16:10 ./source/ap/vim/patches/7.3.521.gz
+-rw-r--r--   1 root root       909 2012-05-18 16:35 ./source/ap/vim/patches/7.3.522.gz
+-rw-r--r--   1 root root      1470 2012-05-18 19:56 ./source/ap/vim/patches/7.3.523.gz
+-rw-r--r--   1 root root       687 2012-05-18 19:56 ./source/ap/vim/patches/7.3.524.gz
+-rw-r--r--   1 root root       913 2012-05-25 09:04 ./source/ap/vim/patches/7.3.525.gz
+-rw-r--r--   1 root root       926 2012-05-25 09:05 ./source/ap/vim/patches/7.3.526.gz
+-rw-r--r--   1 root root      1550 2012-06-03 20:24 ./source/ap/vim/patches/7.3.527.gz
+-rw-r--r--   1 root root      1952 2012-05-25 10:40 ./source/ap/vim/patches/7.3.528.gz
+-rw-r--r--   1 root root      1131 2012-05-25 11:13 ./source/ap/vim/patches/7.3.529.gz
+-rw-r--r--   1 root root       858 2012-05-25 12:08 ./source/ap/vim/patches/7.3.530.gz
+-rw-r--r--   1 root root       859 2012-05-26 22:39 ./source/ap/vim/patches/7.3.531.gz
+-rw-r--r--   1 root root       851 2012-06-01 11:21 ./source/ap/vim/patches/7.3.532.gz
+-rw-r--r--   1 root root       731 2012-06-01 11:47 ./source/ap/vim/patches/7.3.533.gz
+-rw-r--r--   1 root root      1255 2012-06-01 12:59 ./source/ap/vim/patches/7.3.534.gz
+-rw-r--r--   1 root root      2481 2012-06-01 13:22 ./source/ap/vim/patches/7.3.535.gz
+-rw-r--r--   1 root root       956 2012-06-01 15:48 ./source/ap/vim/patches/7.3.536.gz
+-rw-r--r--   1 root root       715 2012-06-01 15:50 ./source/ap/vim/patches/7.3.537.gz
+-rw-r--r--   1 root root      2217 2012-06-01 16:35 ./source/ap/vim/patches/7.3.538.gz
+-rw-r--r--   1 root root       876 2012-06-06 10:05 ./source/ap/vim/patches/7.3.539.gz
+-rw-r--r--   1 root root       837 2012-06-06 10:07 ./source/ap/vim/patches/7.3.540.gz
+-rw-r--r--   1 root root      7527 2012-06-06 14:14 ./source/ap/vim/patches/7.3.541.gz
+-rw-r--r--   1 root root      1068 2012-06-06 14:15 ./source/ap/vim/patches/7.3.542.gz
+-rw-r--r--   1 root root       817 2012-06-06 14:30 ./source/ap/vim/patches/7.3.543.gz
+-rw-r--r--   1 root root      1207 2012-06-06 17:05 ./source/ap/vim/patches/7.3.544.gz
+-rw-r--r--   1 root root      2881 2012-06-06 17:05 ./source/ap/vim/patches/7.3.545.gz
+-rw-r--r--   1 root root       797 2012-06-06 17:06 ./source/ap/vim/patches/7.3.546.gz
+-rw-r--r--   1 root root       797 2012-06-06 21:10 ./source/ap/vim/patches/7.3.547.gz
+-rw-r--r--   1 root root       764 2012-06-07 19:11 ./source/ap/vim/patches/7.3.548.gz
+-rw-r--r--   1 root root      1220 2012-06-13 11:42 ./source/ap/vim/patches/7.3.549.gz
+-rw-r--r--   1 root root      1480 2012-06-13 12:03 ./source/ap/vim/patches/7.3.550.gz
+-rw-r--r--   1 root root      3274 2012-06-13 12:29 ./source/ap/vim/patches/7.3.551.gz
+-rw-r--r--   1 root root      4812 2012-06-13 15:30 ./source/ap/vim/patches/7.3.552.gz
+-rw-r--r--   1 root root      1186 2012-06-13 16:08 ./source/ap/vim/patches/7.3.553.gz
+-rw-r--r--   1 root root       776 2012-06-13 16:16 ./source/ap/vim/patches/7.3.554.gz
+-rw-r--r--   1 root root      2241 2012-06-13 17:20 ./source/ap/vim/patches/7.3.555.gz
+-rw-r--r--   1 root root       945 2012-06-14 19:00 ./source/ap/vim/patches/7.3.556.gz
+-rw-r--r--   1 root root      1187 2012-06-20 09:56 ./source/ap/vim/patches/7.3.557.gz
+-rw-r--r--   1 root root      1143 2012-06-20 10:41 ./source/ap/vim/patches/7.3.558.gz
+-rw-r--r--   1 root root      1447 2012-06-20 12:03 ./source/ap/vim/patches/7.3.559.gz
+-rw-r--r--   1 root root       809 2012-06-20 12:14 ./source/ap/vim/patches/7.3.560.gz
+-rw-r--r--   1 root root       819 2012-06-20 12:27 ./source/ap/vim/patches/7.3.561.gz
+-rw-r--r--   1 root root       848 2012-06-20 13:50 ./source/ap/vim/patches/7.3.562.gz
+-rw-r--r--   1 root root      1168 2012-06-20 15:55 ./source/ap/vim/patches/7.3.563.gz
+-rw-r--r--   1 root root       829 2012-06-20 15:57 ./source/ap/vim/patches/7.3.564.gz
+-rw-r--r--   1 root root       844 2012-06-20 16:40 ./source/ap/vim/patches/7.3.565.gz
+-rw-r--r--   1 root root       963 2012-06-20 20:57 ./source/ap/vim/patches/7.3.566.gz
+-rw-r--r--   1 root root       899 2012-06-29 09:47 ./source/ap/vim/patches/7.3.567.gz
+-rw-r--r--   1 root root      1432 2012-06-29 10:36 ./source/ap/vim/patches/7.3.568.gz
+-rw-r--r--   1 root root     25568 2012-06-29 10:56 ./source/ap/vim/patches/7.3.569.gz
+-rw-r--r--   1 root root      1524 2012-06-29 11:03 ./source/ap/vim/patches/7.3.570.gz
+-rw-r--r--   1 root root      1339 2012-06-29 11:14 ./source/ap/vim/patches/7.3.571.gz
+-rw-r--r--   1 root root       946 2012-06-29 11:20 ./source/ap/vim/patches/7.3.572.gz
+-rw-r--r--   1 root root       729 2012-06-29 11:35 ./source/ap/vim/patches/7.3.573.gz
+-rw-r--r--   1 root root      1062 2012-06-29 11:45 ./source/ap/vim/patches/7.3.574.gz
+-rw-r--r--   1 root root       779 2012-06-29 11:58 ./source/ap/vim/patches/7.3.575.gz
+-rw-r--r--   1 root root      2687 2012-06-29 13:05 ./source/ap/vim/patches/7.3.576.gz
+-rw-r--r--   1 root root      2046 2012-06-29 13:52 ./source/ap/vim/patches/7.3.577.gz
+-rw-r--r--   1 root root       882 2012-06-29 14:20 ./source/ap/vim/patches/7.3.578.gz
+-rw-r--r--   1 root root      2297 2012-06-29 14:29 ./source/ap/vim/patches/7.3.579.gz
+-rw-r--r--   1 root root       770 2012-06-29 15:53 ./source/ap/vim/patches/7.3.580.gz
+-rw-r--r--   1 root root      1372 2012-06-29 17:16 ./source/ap/vim/patches/7.3.581.gz
+-rw-r--r--   1 root root       692 2012-06-29 21:58 ./source/ap/vim/patches/7.3.582.gz
+-rw-r--r--   1 root root      1061 2012-06-30 11:22 ./source/ap/vim/patches/7.3.583.gz
+-rw-r--r--   1 root root      1314 2012-06-30 11:35 ./source/ap/vim/patches/7.3.584.gz
+-rw-r--r--   1 root root       791 2012-07-06 11:39 ./source/ap/vim/patches/7.3.585.gz
+-rw-r--r--   1 root root      1192 2012-07-06 11:42 ./source/ap/vim/patches/7.3.586.gz
+-rw-r--r--   1 root root       972 2012-07-06 14:23 ./source/ap/vim/patches/7.3.587.gz
+-rw-r--r--   1 root root       975 2012-07-06 14:41 ./source/ap/vim/patches/7.3.588.gz
+-rw-r--r--   1 root root       899 2012-07-06 14:50 ./source/ap/vim/patches/7.3.589.gz
+-rw-r--r--   1 root root       980 2012-07-06 15:52 ./source/ap/vim/patches/7.3.590.gz
+-rw-r--r--   1 root root      1979 2012-07-06 16:28 ./source/ap/vim/patches/7.3.591.gz
+-rw-r--r--   1 root root      1372 2012-07-10 11:14 ./source/ap/vim/patches/7.3.592.gz
+-rw-r--r--   1 root root      1043 2012-07-10 12:26 ./source/ap/vim/patches/7.3.593.gz
+-rw-r--r--   1 root root      1642 2012-07-10 12:26 ./source/ap/vim/patches/7.3.594.gz
+-rw-r--r--   1 root root      1538 2012-07-10 12:57 ./source/ap/vim/patches/7.3.595.gz
+-rw-r--r--   1 root root      1734 2012-07-10 13:19 ./source/ap/vim/patches/7.3.596.gz
+-rw-r--r--   1 root root      5242 2012-07-10 14:50 ./source/ap/vim/patches/7.3.597.gz
+-rw-r--r--   1 root root      1189 2012-07-10 15:16 ./source/ap/vim/patches/7.3.598.gz
+-rw-r--r--   1 root root      1083 2012-07-10 16:33 ./source/ap/vim/patches/7.3.599.gz
+-rw-r--r--   1 root root       815 2012-07-10 17:26 ./source/ap/vim/patches/7.3.600.gz
+-rw-r--r--   1 root root       725 2012-07-16 15:27 ./source/ap/vim/patches/7.3.601.gz
+-rw-r--r--   1 root root       726 2012-07-16 15:29 ./source/ap/vim/patches/7.3.602.gz
+-rw-r--r--   1 root root      3333 2012-07-16 15:33 ./source/ap/vim/patches/7.3.603.gz
+-rw-r--r--   1 root root       950 2012-07-16 17:28 ./source/ap/vim/patches/7.3.604.gz
+-rw-r--r--   1 root root      1024 2012-07-19 09:38 ./source/ap/vim/patches/7.3.605.gz
+-rw-r--r--   1 root root      1135 2012-07-19 15:22 ./source/ap/vim/patches/7.3.606.gz
+-rw-r--r--   1 root root       899 2012-07-19 15:40 ./source/ap/vim/patches/7.3.607.gz
+-rw-r--r--   1 root root      1496 2012-07-19 16:06 ./source/ap/vim/patches/7.3.608.gz
+-rw-r--r--   1 root root      1952 2012-07-25 11:49 ./source/ap/vim/patches/7.3.609.gz
+-rw-r--r--   1 root root      4191 2012-07-25 13:07 ./source/ap/vim/patches/7.3.610.gz
+-rw-r--r--   1 root root       890 2012-07-25 13:37 ./source/ap/vim/patches/7.3.611.gz
+-rw-r--r--   1 root root       997 2012-07-25 14:11 ./source/ap/vim/patches/7.3.612.gz
+-rw-r--r--   1 root root      1558 2012-07-25 14:33 ./source/ap/vim/patches/7.3.613.gz
+-rw-r--r--   1 root root      1606 2012-07-25 14:49 ./source/ap/vim/patches/7.3.614.gz
+-rw-r--r--   1 root root      1214 2012-07-25 15:23 ./source/ap/vim/patches/7.3.615.gz
+-rw-r--r--   1 root root       706 2012-07-27 19:07 ./source/ap/vim/patches/7.3.616.gz
+-rw-r--r--   1 root root       838 2012-07-27 19:13 ./source/ap/vim/patches/7.3.617.gz
+-rw-r--r--   1 root root      2969 2012-07-29 10:56 ./source/ap/vim/patches/7.3.618.gz
+-rw-r--r--   1 root root       906 2012-08-02 10:32 ./source/ap/vim/patches/7.3.619.gz
+-rw-r--r--   1 root root      1445 2012-08-02 19:22 ./source/ap/vim/patches/7.3.620.gz
+-rw-r--r--   1 root root       964 2012-08-02 19:25 ./source/ap/vim/patches/7.3.621.gz
+-rw-r--r--   1 root root       946 2012-08-02 19:49 ./source/ap/vim/patches/7.3.622.gz
+-rw-r--r--   1 root root      1177 2012-08-08 11:18 ./source/ap/vim/patches/7.3.623.gz
+-rw-r--r--   1 root root       820 2012-08-08 12:34 ./source/ap/vim/patches/7.3.624.gz
+-rw-r--r--   1 root root      1636 2012-08-08 13:35 ./source/ap/vim/patches/7.3.625.gz
+-rw-r--r--   1 root root       819 2012-08-08 14:06 ./source/ap/vim/patches/7.3.626.gz
+-rw-r--r--   1 root root      1330 2012-08-08 15:03 ./source/ap/vim/patches/7.3.627.gz
+-rw-r--r--   1 root root       869 2012-08-08 15:33 ./source/ap/vim/patches/7.3.628.gz
+-rw-r--r--   1 root root      2974 2012-08-08 16:02 ./source/ap/vim/patches/7.3.629.gz
+-rw-r--r--   1 root root       824 2012-08-15 11:32 ./source/ap/vim/patches/7.3.630.gz
+-rw-r--r--   1 root root      3392 2012-08-15 13:32 ./source/ap/vim/patches/7.3.631.gz
+-rw-r--r--   1 root root      4237 2012-08-15 14:22 ./source/ap/vim/patches/7.3.632.gz
+-rw-r--r--   1 root root      1026 2012-08-21 10:11 ./source/ap/vim/patches/7.3.633.gz
+-rw-r--r--   1 root root       843 2012-08-23 11:00 ./source/ap/vim/patches/7.3.634.gz
+-rw-r--r--   1 root root       892 2012-08-23 11:30 ./source/ap/vim/patches/7.3.635.gz
+-rw-r--r--   1 root root      1854 2012-08-23 13:54 ./source/ap/vim/patches/7.3.636.gz
+-rw-r--r--   1 root root      1380 2012-08-23 16:44 ./source/ap/vim/patches/7.3.637.gz
+-rw-r--r--   1 root root       810 2012-08-23 16:59 ./source/ap/vim/patches/7.3.638.gz
+-rw-r--r--   1 root root      8125 2012-08-29 12:20 ./source/ap/vim/patches/7.3.639.gz
+-rw-r--r--   1 root root    136346 2012-08-29 13:23 ./source/ap/vim/patches/7.3.640.gz
+-rw-r--r--   1 root root       880 2012-08-29 13:23 ./source/ap/vim/patches/7.3.641.gz
+-rw-r--r--   1 root root       908 2012-08-29 13:51 ./source/ap/vim/patches/7.3.642.gz
+-rw-r--r--   1 root root       960 2012-08-29 14:27 ./source/ap/vim/patches/7.3.643.gz
+-rw-r--r--   1 root root       921 2012-08-29 14:35 ./source/ap/vim/patches/7.3.644.gz
+-rw-r--r--   1 root root      1211 2012-08-29 14:56 ./source/ap/vim/patches/7.3.645.gz
+-rw-r--r--   1 root root       839 2006-07-21 04:09 ./source/ap/vim/slack-desc.vim
+-rw-r--r--   1 root root       964 2006-07-21 06:24 ./source/ap/vim/slack-desc.vim-gvim
+-rw-r--r--   1 root root   6922196 2010-08-15 13:02 ./source/ap/vim/vim-7.3.tar.xz
+-rwxr-xr-x   1 root root      6533 2010-08-28 20:42 ./source/ap/vim/vim-gvim.SlackBuild
+-rw-r--r--   1 root root     34845 2011-03-28 19:08 ./source/ap/vim/vim-runtime-syntax-20110328.diff.gz
+-rwxr-xr-x   1 root root      6828 2010-08-28 20:52 ./source/ap/vim/vim.SlackBuild
+-rw-r--r--   1 root root       303 2009-05-28 18:19 ./source/ap/vim/vim.vimrc.diff.gz
+drwxr-xr-x   2 root root      4096 2010-07-28 19:47 ./source/ap/vorbis-tools
+-rw-r--r--   1 root root      1071 2003-12-19 00:21 ./source/ap/vorbis-tools/slack-desc
+-rw-r--r--   1 root root    677868 2010-03-26 07:14 ./source/ap/vorbis-tools/vorbis-tools-1.4.0.tar.xz
+-rwxr-xr-x   1 root root      2702 2010-07-28 19:47 ./source/ap/vorbis-tools/vorbis-tools.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-07-28 20:00 ./source/ap/workbone
+-rw-r--r--   1 root root       689 2002-03-23 22:37 ./source/ap/workbone/slack-desc
+-rw-r--r--   1 root root       262 2003-02-14 08:22 ./source/ap/workbone/workbone.1.diff.gz
+-rwxr-xr-x   1 root root      2551 2010-07-28 20:01 ./source/ap/workbone/workbone.SlackBuild
+-rw-r--r--   1 root root      4997 2008-06-05 00:32 ./source/ap/workbone/workbone_2.40-9.diff.gz
+-rw-r--r--   1 root root     21877 1998-10-15 07:00 ./source/ap/workbone/workbone_2.40.orig.tar.gz
+drwxr-xr-x   2 root root      4096 2010-02-09 21:14 ./source/ap/xfsdump
+-rw-r--r--   1 root root       983 2006-02-22 20:00 ./source/ap/xfsdump/slack-desc
+-rw-r--r--   1 root root    560656 2010-01-13 01:53 ./source/ap/xfsdump/xfsdump-3.0.4.tar.xz
+-rwxr-xr-x   1 root root      3906 2010-02-09 21:26 ./source/ap/xfsdump/xfsdump.SlackBuild
+-rw-r--r--   1 root root       473 2010-02-09 21:18 ./source/ap/xfsdump/xfsdump.destdir.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-24 20:09 ./source/ap/zsh
+-rw-r--r--   1 root root       140 2007-04-10 01:12 ./source/ap/zsh/doinst.sh.gz
+-rw-r--r--   1 root root       962 2002-02-14 08:13 ./source/ap/zsh/slack-desc
+-rw-r--r--   1 root root   2637064 2012-07-21 18:48 ./source/ap/zsh/zsh-5.0.0-doc.tar.xz
+-rw-r--r--   1 root root   2522772 2012-07-21 18:44 ./source/ap/zsh/zsh-5.0.0.tar.xz
+-rwxr-xr-x   1 root root      3987 2012-07-24 20:09 ./source/ap/zsh/zsh.SlackBuild
+drwxr-xr-x  42 root root      4096 2012-09-19 17:57 ./source/d
+drwxr-xr-x   2 root root      4096 2012-06-11 16:30 ./source/d/autoconf
+-rw-r--r--   1 root root   1214744 2012-04-25 03:17 ./source/d/autoconf/autoconf-2.69.tar.xz
+-rw-r--r--   1 root root       556 2012-04-25 03:17 ./source/d/autoconf/autoconf-2.69.tar.xz.sig
+-rwxr-xr-x   1 root root      2929 2010-11-06 17:44 ./source/d/autoconf/autoconf.SlackBuild
+-rw-r--r--   1 root root       339 2001-05-30 01:40 ./source/d/autoconf/doinst.sh.gz
+-rw-r--r--   1 root root      1090 2002-03-23 22:38 ./source/d/autoconf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-24 16:47 ./source/d/automake
+-rw-r--r--   1 root root   1092140 2012-04-13 15:36 ./source/d/automake/automake-1.11.5.tar.xz
+-rwxr-xr-x   1 root root      3166 2012-06-24 16:52 ./source/d/automake/automake.SlackBuild
+-rw-r--r--   1 root root      1506 2012-06-24 16:47 ./source/d/automake/automake.perl516.prototype.diff.gz
+-rw-r--r--   1 root root       348 2001-05-30 01:49 ./source/d/automake/doinst.sh.gz
+-rw-r--r--   1 root root      1086 2002-03-23 22:39 ./source/d/automake/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-06 00:06 ./source/d/binutils
+-rw-r--r--   1 root root       543 2012-04-25 18:03 ./source/d/binutils/binutils-2.22.52.0.2.tar.sign
+-rw-r--r--   1 root root  13340324 2012-04-25 18:03 ./source/d/binutils/binutils-2.22.52.0.2.tar.xz
+-rwxr-xr-x   1 root root      6447 2012-08-04 17:44 ./source/d/binutils/binutils.SlackBuild
+-rw-rw-r--   1 root root     17403 2012-04-25 17:42 ./source/d/binutils/release.binutils-2.22.52.0.2
+-rw-r--r--   1 root root       902 2002-03-22 21:41 ./source/d/binutils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 17:27 ./source/d/bison
+-rw-r--r--   1 root root   1608376 2012-06-05 08:16 ./source/d/bison/bison-2.5.1.tar.xz
+-rwxr-xr-x   1 root root      3702 2012-06-28 17:28 ./source/d/bison/bison.SlackBuild
+-rw-r--r--   1 root root       927 2002-03-23 22:41 ./source/d/bison/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-16 03:56 ./source/d/ccache
+-rw-r--r--   1 root root    238304 2012-08-11 13:23 ./source/d/ccache/ccache-3.1.8.tar.xz
+-rw-r--r--   1 root root       198 2012-08-11 13:23 ./source/d/ccache/ccache-3.1.8.tar.xz.asc
+-rwxr-xr-x   1 root root      2889 2011-01-11 20:15 ./source/d/ccache/ccache.SlackBuild
+-rw-r--r--   1 root root       771 2003-03-18 06:44 ./source/d/ccache/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-20 20:35 ./source/d/clisp
+-rw-r--r--   1 root root   8091011 2010-07-07 17:29 ./source/d/clisp/clisp-2.49.tar.bz2
+-rw-r--r--   1 root root        65 2010-07-07 17:29 ./source/d/clisp/clisp-2.49.tar.bz2.sig
+-rwxr-xr-x   1 root root      5799 2010-07-20 20:36 ./source/d/clisp/clisp.SlackBuild
+-rw-r--r--   1 root root    898945 2008-09-11 09:39 ./source/d/clisp/ffcall-20080704cvs.tar.bz2
+-rw-r--r--   1 root root    264500 2009-12-11 14:04 ./source/d/clisp/libsigsegv-2.8.tar.xz
+-rw-r--r--   1 root root      1121 2003-07-17 21:01 ./source/d/clisp/slack-desc
+-rwxr-xr-x   1 root root       242 2008-09-11 11:59 ./source/d/clisp/source.download
+drwxr-xr-x   2 root root      4096 2012-06-26 15:21 ./source/d/cmake
+-rw-r--r--   1 root root   3918048 2012-04-18 19:22 ./source/d/cmake/cmake-2.8.8.tar.xz
+-rwxr-xr-x   1 root root      3798 2012-06-26 15:21 ./source/d/cmake/cmake.SlackBuild
+-rw-r--r--   1 root root      1292 2012-06-26 15:20 ./source/d/cmake/cmake.findpkgconfig.3ea850.patch.gz
+-rw-r--r--   1 root root       853 2012-07-22 16:55 ./source/d/cmake/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-03 07:14 ./source/d/cscope
+-rw-r--r--   1 root root    361214 2009-04-30 20:14 ./source/d/cscope/cscope-15.7a.tar.bz2
+-rwxr-xr-x   1 root root      2952 2010-05-03 07:16 ./source/d/cscope/cscope.SlackBuild
+-rw-r--r--   1 root root       805 2003-08-20 00:37 ./source/d/cscope/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/cvs
+-rw-r--r--   1 root root   2942652 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2
+-rw-r--r--   1 root root        65 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2.sig
+-rwxr-xr-x   1 root root      3149 2010-07-29 00:19 ./source/d/cvs/cvs.SlackBuild
+-rw-r--r--   1 root root       992 2002-02-23 03:00 ./source/d/cvs/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/d/dev86
+-rw-r--r--   1 root root    703028 2007-10-16 12:48 ./source/d/dev86/Dev86src-0.16.17.tar.gz
+-rw-r--r--   1 root root       408 2008-03-28 23:59 ./source/d/dev86/README
+-rw-r--r--   1 root root       361 2008-09-23 19:43 ./source/d/dev86/dev86-x86_64.noelks.patch.gz
+-rw-r--r--   1 root root       342 2008-09-22 21:52 ./source/d/dev86/dev86-x86_64.patch.gz
+-rwxr-xr-x   1 root root      3662 2010-07-29 00:45 ./source/d/dev86/dev86.SlackBuild
+-rw-r--r--   1 root root       312 2008-03-29 05:05 ./source/d/dev86/dev86.info
+-rw-r--r--   1 root root       490 2008-09-18 05:36 ./source/d/dev86/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/distcc
+-rw-r--r--   1 root root    341601 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2
+-rw-r--r--   1 root root       189 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2.asc
+-rwxr-xr-x   1 root root      2921 2010-07-29 00:46 ./source/d/distcc/distcc.SlackBuild
+-rw-r--r--   1 root root       940 2003-02-19 22:05 ./source/d/distcc/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-09 00:30 ./source/d/doxygen
+-rw-r--r--   1 root root   3584404 2012-06-10 08:44 ./source/d/doxygen/doxygen-1.8.1.1.src.tar.xz
+-rwxr-xr-x   1 root root      3844 2012-06-25 22:55 ./source/d/doxygen/doxygen.SlackBuild
+-rw-r--r--   1 root root       969 2008-02-11 03:44 ./source/d/doxygen/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/flex
+-rw-r--r--   1 root root   1256501 2008-02-26 21:40 ./source/d/flex/flex-2.5.35.tar.bz2
+-rwxr-xr-x   1 root root      3607 2010-07-29 00:47 ./source/d/flex/flex.SlackBuild
+-rw-r--r--   1 root root       786 2006-09-20 03:05 ./source/d/flex/slack-desc
+drwxr-xr-x   3 root root      4096 2012-06-26 17:38 ./source/d/gcc
+-rw-r--r--   1 root root    164368 2011-07-19 16:36 ./source/d/gcc/antlr-runtime-3.4.jar
+-rw-r--r--   1 root root      3206 2012-01-06 12:37 ./source/d/gcc/create_gcj_jvm.sh
+-rw-r--r--   1 root root   1470676 2010-01-06 17:27 ./source/d/gcc/ecj-4.5.jar
+-rw-r--r--   1 root root       124 2011-11-29 10:16 ./source/d/gcc/ecj.sh
+-rw-rw-r--   1 root root    482116 2009-01-16 18:32 ./source/d/gcc/fastjar-0.97.tar.xz
+drwxr-xr-x   2 root root      4096 2010-10-04 23:57 ./source/d/gcc/fastjar-patches
+-rw-r--r--   1 root root       554 2009-01-16 18:34 ./source/d/gcc/fastjar-patches/1000-fastjar-0.97-segfault.patch.gz
+-rw-r--r--   1 root root       345 2009-12-22 12:22 ./source/d/gcc/fastjar-patches/1001-fastjar-0.97-len1.patch.gz
+-rw-r--r--   1 root root       358 2010-06-11 08:22 ./source/d/gcc/fastjar-patches/1002-fastjar-0.97-filename0.patch.gz
+-rw-r--r--   1 root root      1211 2010-06-11 08:22 ./source/d/gcc/fastjar-patches/1003-fastjar-CVE-2010-0831.patch.gz
+-rw-r--r--   1 root root       514 2010-06-24 20:18 ./source/d/gcc/fastjar-patches/1004-fastjar-man.patch.gz
+-rw-r--r--   1 root root       717 2012-06-15 20:12 ./source/d/gcc/gcc-4.7.1.adalib.pic.diff.gz
+-rw-r--r--   1 root root  61167648 2012-06-14 12:31 ./source/d/gcc/gcc-4.7.1.tar.xz
+-rw-r--r--   1 root root       527 2010-08-01 21:55 ./source/d/gcc/gcc-no_fixincludes.diff.gz
+-rwxr-xr-x   1 root root     28475 2012-06-19 04:27 ./source/d/gcc/gcc.SlackBuild
+-rw-r--r--   1 root root       756 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc
+-rw-r--r--   1 root root       753 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc-g++
+-rw-r--r--   1 root root      1083 2011-05-28 16:23 ./source/d/gcc/slack-desc.gcc-gfortran
+-rw-r--r--   1 root root       843 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-gnat
+-rw-r--r--   1 root root      1033 2012-01-06 20:09 ./source/d/gcc/slack-desc.gcc-go
+-rw-r--r--   1 root root       817 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-java
+-rw-r--r--   1 root root       962 2006-07-30 03:27 ./source/d/gcc/slack-desc.gcc-objc
+drwxr-xr-x   2 root root      4096 2012-08-17 21:57 ./source/d/gdb
+-rw-r--r--   1 root root  16069068 2012-08-17 17:57 ./source/d/gdb/gdb-7.5.tar.xz
+-rwxr-xr-x   1 root root      3813 2012-08-17 22:00 ./source/d/gdb/gdb.SlackBuild
+-rw-r--r--   1 root root      1211 2008-02-11 03:44 ./source/d/gdb/slack-desc
+lrwxrwxrwx   1 root root        12 2010-07-29 00:48 ./source/d/gettext-tools -> ../a/gettext
+drwxr-xr-x   2 root root      4096 2012-09-19 16:50 ./source/d/git
+-rw-r--r--   1 root root   2941376 2012-09-18 22:52 ./source/d/git/git-1.7.12.1.tar.xz
+-rwxr-xr-x   1 root root      4792 2011-02-16 04:07 ./source/d/git/git.SlackBuild
+-rw-r--r--   1 root root        32 2012-05-25 22:42 ./source/d/git/git.url
+-rw-r--r--   1 root root       851 2009-05-30 01:25 ./source/d/git/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-29 00:49 ./source/d/gperf
+-rw-r--r--   1 root root    676172 2009-02-03 21:16 ./source/d/gperf/gperf-3.0.4.tar.xz
+-rwxr-xr-x   1 root root      3432 2010-07-29 00:50 ./source/d/gperf/gperf.SlackBuild
+-rw-r--r--   1 root root      1018 2007-02-14 20:50 ./source/d/gperf/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-11 19:06 ./source/d/guile
+-rw-r--r--   1 root root   2320720 2010-12-13 20:36 ./source/d/guile/guile-1.8.8.tar.xz
+-rwxr-xr-x   1 root root      3456 2011-01-11 19:08 ./source/d/guile/guile.SlackBuild
+-rw-r--r--   1 root root       894 2008-02-11 03:44 ./source/d/guile/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/indent
+-rw-r--r--   1 root root    531879 2009-03-04 04:05 ./source/d/indent/indent-2.2.10.tar.bz2
+-rwxr-xr-x   1 root root      3581 2010-07-29 01:11 ./source/d/indent/indent.SlackBuild
+-rw-r--r--   1 root root       889 2009-03-04 04:05 ./source/d/indent/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/d/intltool
+-rw-r--r--   1 root root    136600 2012-02-26 18:53 ./source/d/intltool/intltool-0.50.2.tar.xz
+-rwxr-xr-x   1 root root      3787 2012-06-25 22:55 ./source/d/intltool/intltool.SlackBuild
+-rw-r--r--   1 root root       692 2008-09-18 04:58 ./source/d/intltool/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-29 19:19 ./source/d/kernel-headers
+-rw-r--r--   1 root root       797 2003-09-04 03:56 ./source/d/kernel-headers/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 22:12 ./source/d/libtool
+-rw-r--r--   1 root root       385 2009-05-30 01:28 ./source/d/libtool/doinst.sh.gz
+-rw-r--r--   1 root root    868760 2011-10-18 08:22 ./source/d/libtool/libtool-2.4.2.tar.xz
+-rw-r--r--   1 root root        72 2011-10-18 08:22 ./source/d/libtool/libtool-2.4.2.tar.xz.sig
+-rwxr-xr-x   1 root root      3162 2010-11-06 18:40 ./source/d/libtool/libtool.SlackBuild
+-rw-r--r--   1 root root       506 2010-11-06 18:38 ./source/d/libtool/libtool.no.moved.warning.diff.gz
+-rw-r--r--   1 root root       958 2009-05-30 01:28 ./source/d/libtool/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-02 01:39 ./source/d/llvm
+-rw-r--r--   1 root root   5400152 2011-12-01 17:04 ./source/d/llvm/clang-3.0.tar.xz
+-rw-r--r--   1 root root   6856072 2011-12-01 17:05 ./source/d/llvm/llvm-3.0.tar.xz
+-rwxr-xr-x   1 root root      4956 2012-07-13 15:07 ./source/d/llvm/llvm.SlackBuild
+-rw-r--r--   1 root root        91 2012-05-01 22:20 ./source/d/llvm/llvm.url
+-rw-r--r--   1 root root       855 2012-05-02 01:38 ./source/d/llvm/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-02 23:25 ./source/d/m4
+-rw-r--r--   1 root root   1005264 2011-03-01 19:45 ./source/d/m4/m4-1.4.16.tar.xz
+-rw-r--r--   1 root root       556 2011-03-01 19:45 ./source/d/m4/m4-1.4.16.tar.xz.sig
+-rwxr-xr-x   1 root root      3981 2011-03-02 23:26 ./source/d/m4/m4.SlackBuild
+-rw-r--r--   1 root root       928 2008-10-15 04:26 ./source/d/m4/slack-desc
+drwxr-xr-x   2 root root      4096 2011-11-22 14:49 ./source/d/make
+-rw-r--r--   1 root root       273 2011-11-22 14:48 ./source/d/make/make-3.82-android-build-fix.diff.gz
+-rw-r--r--   1 root root   1242186 2010-07-28 05:59 ./source/d/make/make-3.82.tar.bz2
+-rw-r--r--   1 root root        72 2010-07-28 05:59 ./source/d/make/make-3.82.tar.bz2.sig
+-rwxr-xr-x   1 root root      3443 2011-11-22 14:50 ./source/d/make/make.SlackBuild
+-rw-r--r--   1 root root       923 2002-03-23 22:51 ./source/d/make/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 21:11 ./source/d/mercurial
+-rw-r--r--   1 root root       279 2010-05-18 06:20 ./source/d/mercurial/doinst.sh.gz
+-rw-r--r--   1 root root   1771592 2012-06-02 04:54 ./source/d/mercurial/mercurial-2.2.2.tar.xz
+-rwxr-xr-x   1 root root      3734 2010-05-18 06:37 ./source/d/mercurial/mercurial.SlackBuild
+-rw-r--r--   1 root root      1253 2006-05-14 00:35 ./source/d/mercurial/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-19 15:03 ./source/d/nasm
+-rw-r--r--   1 root root    680404 2012-08-18 18:04 ./source/d/nasm/nasm-2.10.04.tar.xz
+-rwxr-xr-x   1 root root      2797 2011-01-11 19:18 ./source/d/nasm/nasm.SlackBuild
+-rw-r--r--   1 root root       765 2002-05-28 01:27 ./source/d/nasm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-20 16:32 ./source/d/oprofile
+-rw-r--r--   1 root root    845200 2011-08-12 15:43 ./source/d/oprofile/oprofile-0.9.7.tar.xz
+-rwxr-xr-x   1 root root      4158 2012-06-20 16:00 ./source/d/oprofile/oprofile.SlackBuild
+-rw-r--r--   1 root root       494 2012-06-20 16:32 ./source/d/oprofile/oprofile.binutils.diff.gz
+-rw-r--r--   1 root root       965 2003-09-08 04:40 ./source/d/oprofile/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/p2c
+-rw-r--r--   1 root root       409 2007-06-02 17:34 ./source/d/p2c/_p2c.tar.gz
+-rw-r--r--   1 root root    423399 1996-07-04 13:29 ./source/d/p2c/p2c-1.21alpha2.tar.gz
+-rwxr-xr-x   1 root root      4424 2010-07-29 01:16 ./source/d/p2c/p2c.SlackBuild
+-rw-r--r--   1 root root       268 2007-06-02 17:54 ./source/d/p2c/p2c.examples.diff.gz
+-rw-r--r--   1 root root      4450 2005-05-05 14:47 ./source/d/p2c/p2c_1.21alpha2-2.1.diff.gz
+-rw-r--r--   1 root root       168 2008-10-31 22:43 ./source/d/p2c/p2c_time.diff.gz
+-rw-r--r--   1 root root      1000 2002-03-23 22:52 ./source/d/p2c/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-17 04:02 ./source/d/perl
+-rw-r--r--   1 root root    138802 2012-04-28 14:18 ./source/d/perl/DBD-mysql-4.021.tar.gz
+-rw-r--r--   1 root root    585651 2012-06-06 16:51 ./source/d/perl/DBI-1.622.tar.gz
+-rw-r--r--   1 root root     81196 2012-03-25 20:53 ./source/d/perl/URI-1.60.tar.gz
+-rw-r--r--   1 root root    238441 2011-06-03 04:19 ./source/d/perl/XML-Parser-2.41.tar.gz
+-rw-r--r--   1 root root     75993 2012-06-20 10:01 ./source/d/perl/XML-Simple-2.20.tar.gz
+-rw-r--r--   1 root root  10530888 2012-08-08 22:29 ./source/d/perl/perl-5.16.1.tar.xz
+-rwxr-xr-x   1 root root      9013 2012-08-17 04:03 ./source/d/perl/perl.SlackBuild
+-rw-r--r--   1 root root       606 2008-09-21 00:04 ./source/d/perl/perl.configure.multilib.patch.gz
+-rw-r--r--   1 root root       971 2002-07-23 05:23 ./source/d/perl/slack-desc
+drwxr-xr-x   3 root root      4096 2010-07-29 01:18 ./source/d/pkg-config
+-rw-r--r--   1 root root       143 2008-04-09 21:47 ./source/d/pkg-config/doinst.sh.gz
+-rw-r--r--   1 root root    492420 2010-05-28 16:12 ./source/d/pkg-config/pkg-config-0.25.tar.xz
+-rwxr-xr-x   1 root root      3534 2010-07-29 01:20 ./source/d/pkg-config/pkg-config.SlackBuild
+drwxr-xr-x   2 root root      4096 2006-08-20 04:13 ./source/d/pkg-config/scripts
+-rwxr-xr-x   1 root root       194 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.csh
+-rwxr-xr-x   1 root root       204 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.sh
+-rw-r--r--   1 root root       907 2008-02-11 03:44 ./source/d/pkg-config/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/pmake
+-rw-r--r--   1 root root    264383 2005-07-07 09:32 ./source/d/pmake/pmake-1.111.tar.gz
+-rwxr-xr-x   1 root root      4221 2011-03-29 04:17 ./source/d/pmake/pmake.SlackBuild
+-rw-r--r--   1 root root       265 2007-03-24 23:38 ./source/d/pmake/pmake.strerror.strdup.diff.gz
+-rw-r--r--   1 root root     38071 2007-02-09 20:45 ./source/d/pmake/pmake.txt.gz
+-rw-r--r--   1 root root     26675 2005-07-07 09:32 ./source/d/pmake/pmake_1.111-1.diff.gz
+-rw-r--r--   1 root root       795 2007-02-09 21:04 ./source/d/pmake/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-23 15:41 ./source/d/python
+-rw-r--r--   1 root root   9976088 2012-04-09 23:28 ./source/d/python/Python-2.7.3.tar.xz
+-rw-r--r--   1 root root   1569795 2012-04-09 23:31 ./source/d/python/python-2.7.3-docs-text.tar.bz2
+-rwxr-xr-x   1 root root      5140 2012-07-04 00:58 ./source/d/python/python.SlackBuild
+-rw-r--r--   1 root root       798 2012-05-09 18:38 ./source/d/python/python.no-static-library.diff.gz
+-rw-r--r--   1 root root       325 2009-06-09 19:23 ./source/d/python/python.readline.set_pre_input_hook.diff.gz
+-rw-r--r--   1 root root      2061 2012-05-09 03:49 ./source/d/python/python.x86_64.diff.gz
+-rw-r--r--   1 root root       895 2002-03-23 22:54 ./source/d/python/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/d/rcs
+-rw-r--r--   1 root root     10982 2007-06-27 22:53 ./source/d/rcs/_rcs.tar.gz
+-rw-r--r--   1 root root       270 1995-08-12 19:26 ./source/d/rcs/rcs-5.7.diff.gz
+-rw-r--r--   1 root root    282413 1995-06-16 14:53 ./source/d/rcs/rcs-5.7.tar.gz
+-rwxr-xr-x   1 root root      3037 2010-01-25 22:14 ./source/d/rcs/rcs.SlackBuild
+-rw-r--r--   1 root root       776 2002-03-23 22:58 ./source/d/rcs/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-26 17:21 ./source/d/ruby
+-rw-rw-r--   1 root root   7548960 2012-04-25 11:15 ./source/d/ruby/ruby-1.9.3-p194.tar.xz
+-rwxr-xr-x   1 root root      4196 2012-07-04 03:33 ./source/d/ruby/ruby.SlackBuild
+-rw-r--r--   1 root root       865 2006-07-20 06:49 ./source/d/ruby/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-19 09:24 ./source/d/slacktrack
+-rw-r--r--   1 root root     27340 2009-05-15 22:42 ./source/d/slacktrack/OVERVIEW
+-rw-r--r--   1 root root     88524 2012-09-19 09:24 ./source/d/slacktrack/slacktrack-2.12-source.tar.xz
+-rwxr-xr-x   1 root root       348 2012-09-19 09:24 ./source/d/slacktrack/slacktrack.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-07-29 01:23 ./source/d/strace
+-rw-r--r--   1 root root      1007 2002-04-06 20:28 ./source/d/strace/slack-desc
+-rw-r--r--   1 root root    504078 2010-07-29 01:23 ./source/d/strace/strace-4.5.20.tar.bz2
+-rwxr-xr-x   1 root root      2759 2010-07-29 01:25 ./source/d/strace/strace.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-09-19 16:48 ./source/d/subversion
+-rwxr-xr-x   1 root root       181 2012-05-25 22:37 ./source/d/subversion/get-svn-book.sh
+-rw-r--r--   1 root root      1058 2010-04-30 02:11 ./source/d/subversion/slack-desc
+-rw-r--r--   1 root root   4801244 2012-08-14 11:18 ./source/d/subversion/subversion-1.7.6.tar.xz
+-rwxr-xr-x   1 root root      5581 2012-09-19 16:42 ./source/d/subversion/subversion.SlackBuild
+-rw-r--r--   1 root root    468227 2012-05-25 06:01 ./source/d/subversion/svn-book-html.tar.bz2
+drwxr-xr-x   2 root root      4096 2012-05-25 22:17 ./source/d/swig
+-rw-r--r--   1 root root      1018 2009-03-08 02:10 ./source/d/swig/slack-desc
+-rw-r--r--   1 root root   3554884 2012-04-29 21:55 ./source/d/swig/swig-2.0.6.tar.xz
+-rwxr-xr-x   1 root root      3653 2012-05-25 23:33 ./source/d/swig/swig.SlackBuild
+-rw-r--r--   1 root root        61 2009-02-23 00:35 ./source/d/swig/swig.url
+drwxr-xr-x   2 root root      4096 2011-11-26 19:51 ./source/d/yasm
+-rw-r--r--   1 root root      1047 2008-06-16 08:56 ./source/d/yasm/slack-desc
+-rw-r--r--   1 root root    921492 2011-11-26 19:47 ./source/d/yasm/yasm-1.2.0.tar.xz
+-rwxr-xr--   1 root root      7478 2012-06-20 00:50 ./source/d/yasm/yasm.SlackBuild
+drwxr-xr-x   3 root root      4096 2010-03-16 04:13 ./source/e
+drwxr-xr-x   2 root root      4096 2012-08-29 16:19 ./source/e/emacs
+-rw-r--r--   1 root root       312 2008-04-06 03:10 ./source/e/emacs/doinst.sh.gz
+-rw-r--r--   1 root root  34712012 2012-08-27 06:38 ./source/e/emacs/emacs-24.2.tar.xz
+-rwxr-xr-x   1 root root      5765 2012-08-31 20:06 ./source/e/emacs/emacs.SlackBuild
+-rw-r--r--   1 root root       549 2008-04-06 03:11 ./source/e/emacs/slack-desc
+drwxr-xr-x   2 root root      4096 2009-03-16 21:18 ./source/f
+-rw-r--r--   1 root root       963 2002-02-25 21:44 ./source/f/slack-desc.linux-faqs
+-rw-r--r--   1 root root       804 2002-02-25 21:55 ./source/f/slack-desc.linux-howtos
+drwxr-xr-x   4 root root      4096 2012-07-02 03:57 ./source/installer
+-rw-r--r--   1 root root   2167516 2012-02-04 19:37 ./source/installer/busybox-1.19.4.tar.bz2
+-rw-r--r--   1 root root       536 2012-02-04 19:37 ./source/installer/busybox-1.19.4.tar.bz2.sign
+-rw-r--r--   1 root root     27409 2012-04-07 16:51 ./source/installer/busybox-dot-config
+-rw-r--r--   1 root root       275 2009-12-31 20:04 ./source/installer/busybox.2.6.32.2.diff.gz
+-rwxr-xr-x   1 root root      2489 2012-07-02 03:58 ./source/installer/busybox.SlackBuild
+-rw-r--r--   1 root root       622 2012-07-02 03:57 ./source/installer/busybox.wget.P.diff.gz
+drwxr-xr-x   2 root root      4096 2010-01-20 15:49 ./source/installer/dhcpcd
+-rw-r--r--   1 root root       311 2009-03-06 20:55 ./source/installer/dhcpcd/config.h.diff.gz
+-rw-r--r--   1 root root     45030 2008-08-26 03:12 ./source/installer/dhcpcd/dhcpcd-3.2.3.tar.bz2
+-rw-r--r--   1 root root       391 2009-03-07 01:24 ./source/installer/dhcpcd/dhcpcd.sh.diff.gz
+drwxr-xr-x   2 root root      4096 2008-03-13 13:43 ./source/installer/dropbear
+-rw-r--r--   1 root root       372 2008-03-13 13:43 ./source/installer/dropbear/doinst.sh
+-rw-r--r--   1 root root   1589729 2008-03-13 13:43 ./source/installer/dropbear/dropbear-0.50.tar.bz2
+-rwxr-xr--   1 root root      4332 2008-03-13 13:43 ./source/installer/dropbear/dropbear.Slackbuild
+-rw-r--r--   1 root root       414 2008-03-13 13:43 ./source/installer/dropbear/dropbear.xauth.patch
+-rw-r--r--   1 root root       582 2008-03-13 13:43 ./source/installer/dropbear/dropbear_dbclientpath.patch
+-rw-r--r--   1 root root      1887 2008-03-13 13:43 ./source/installer/dropbear/dropbear_emptypass.patch
+-rw-r--r--   1 root root      1795 2008-03-13 13:43 ./source/installer/dropbear/rc.dropbear.new
+-rw-r--r--   1 root root       890 2008-03-13 13:43 ./source/installer/dropbear/slack-desc
+-rw-r--r--   1 root root    161644 2011-03-23 21:16 ./source/installer/memtest86+-4.20.tar.xz
+drwxr-xr-x   6 root root      4096 2012-09-19 02:01 ./source/k
+-rw-r--r--   1 root root      1204 2012-09-17 21:08 ./source/k/README.TXT
+drwxr-xr-x   2 root root      4096 2012-09-17 21:06 ./source/k/config-x86
+-rw-r--r--   1 root root    125794 2012-09-17 18:18 ./source/k/config-x86/config-generic-3.2.29
+-rw-r--r--   1 root root    126494 2012-09-17 17:53 ./source/k/config-x86/config-generic-smp-3.2.29-smp
+-rw-r--r--   1 root root    125768 2012-09-17 19:07 ./source/k/config-x86/config-huge-3.2.29
+-rw-r--r--   1 root root    126468 2012-09-17 18:13 ./source/k/config-x86/config-huge-smp-3.2.29-smp
+drwxr-xr-x   2 root root      4096 2012-09-17 21:07 ./source/k/config-x86_64
+-rw-r--r--   1 root root    121350 2012-09-17 18:31 ./source/k/config-x86_64/config-generic-3.2.29.x64
+-rw-r--r--   1 root root    121324 2012-09-17 19:16 ./source/k/config-x86_64/config-huge-3.2.29.x64
+-rw-r--r--   1 root root       836 2012-09-12 05:26 ./source/k/linux-3.2.29.tar.sign
+-rw-r--r--   1 root root  65111552 2012-09-12 05:26 ./source/k/linux-3.2.29.tar.xz
+drwxr-xr-x   8 root root      4096 2012-09-17 21:07 ./source/k/packaging-x86
+drwxr-xr-x   2 root root      4096 2012-09-17 18:27 ./source/k/packaging-x86/kernel-generic
+drwxr-xr-x   2 root root      4096 2012-09-17 18:03 ./source/k/packaging-x86/kernel-generic-smp
+-rwxr-xr-x   1 root root      1887 2012-09-17 18:03 ./source/k/packaging-x86/kernel-generic-smp/kernel-generic-smp.SlackBuild
+-rw-r--r--   1 root root      1143 2007-06-12 20:06 ./source/k/packaging-x86/kernel-generic-smp/slack-desc
+-rwxr-xr-x   1 root root      1824 2012-09-17 18:27 ./source/k/packaging-x86/kernel-generic/kernel-generic.SlackBuild
+-rw-r--r--   1 root root      1052 2007-04-27 02:30 ./source/k/packaging-x86/kernel-generic/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-17 19:11 ./source/k/packaging-x86/kernel-huge
+drwxr-xr-x   2 root root      4096 2012-09-17 18:17 ./source/k/packaging-x86/kernel-huge-smp
+-rwxr-xr-x   1 root root      1884 2012-09-17 18:17 ./source/k/packaging-x86/kernel-huge-smp/kernel-huge-smp.SlackBuild
+-rw-r--r--   1 root root      1156 2007-05-28 01:18 ./source/k/packaging-x86/kernel-huge-smp/slack-desc
+-rwxr-xr-x   1 root root      1831 2012-09-17 19:11 ./source/k/packaging-x86/kernel-huge/kernel-huge.SlackBuild
+-rw-r--r--   1 root root      1065 2007-04-30 16:39 ./source/k/packaging-x86/kernel-huge/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-17 18:27 ./source/k/packaging-x86/kernel-modules
+drwxr-xr-x   2 root root      4096 2012-09-17 18:03 ./source/k/packaging-x86/kernel-modules-smp
+-rwxr-xr-x   1 root root      1848 2012-09-17 18:03 ./source/k/packaging-x86/kernel-modules-smp/kernel-modules-smp.SlackBuild
+-rwxr-xr-x   1 root root     35406 2009-06-04 22:36 ./source/k/packaging-x86/kernel-modules-smp/rc.modules.new
+-rw-r--r--   1 root root      1037 2007-06-08 06:06 ./source/k/packaging-x86/kernel-modules-smp/slack-desc
+-rwxr-xr-x   1 root root      2046 2012-09-17 18:27 ./source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild
+-rwxr-xr-x   1 root root     35406 2009-06-04 22:36 ./source/k/packaging-x86/kernel-modules/rc.modules.new
+-rw-r--r--   1 root root       996 2007-04-30 16:55 ./source/k/packaging-x86/kernel-modules/slack-desc
+drwxr-xr-x   5 root root      4096 2012-09-17 21:07 ./source/k/packaging-x86_64
+drwxr-xr-x   2 root root      4096 2012-09-17 18:38 ./source/k/packaging-x86_64/kernel-generic
+-rwxr-xr-x   1 root root      2924 2012-09-17 18:38 ./source/k/packaging-x86_64/kernel-generic/kernel-generic.SlackBuild
+-rw-r--r--   1 root root      1091 2009-06-18 17:37 ./source/k/packaging-x86_64/kernel-generic/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-17 19:19 ./source/k/packaging-x86_64/kernel-huge
+-rwxr-xr-x   1 root root      2921 2012-09-17 19:19 ./source/k/packaging-x86_64/kernel-huge/kernel-huge.SlackBuild
+-rw-r--r--   1 root root      1100 2009-06-18 17:36 ./source/k/packaging-x86_64/kernel-huge/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-17 18:38 ./source/k/packaging-x86_64/kernel-modules
+-rwxr-xr-x   1 root root      2887 2012-09-17 18:38 ./source/k/packaging-x86_64/kernel-modules/kernel-modules.SlackBuild
+-rwxr-xr-x   1 root root     35406 2009-06-04 22:36 ./source/k/packaging-x86_64/kernel-modules/rc.modules.new
+-rw-r--r--   1 root root       985 2009-06-18 17:37 ./source/k/packaging-x86_64/kernel-modules/slack-desc
+drwxr-xr-x  14 root root      4096 2012-06-21 02:31 ./source/kde
+-rwxr-xr-x   1 root root     16079 2012-04-02 22:17 ./source/kde/KDE.SlackBuild
+-rw-r--r--   1 root root      1862 2012-08-07 06:33 ./source/kde/KDE.options
+drwxr-xr-x   2 root root      4096 2012-08-14 16:36 ./source/kde/build
+-rw-r--r--   1 root root         2 2012-08-07 19:42 ./source/kde/build/calligra
+drwxr-xr-x   2 root root      4096 2012-05-01 02:14 ./source/kde/cmake
+-rw-r--r--   1 root root       739 2011-07-31 10:28 ./source/kde/cmake/amarok
+-rw-r--r--   1 root root       580 2011-12-14 23:48 ./source/kde/cmake/analitza
+-rw-r--r--   1 root root       316 2011-07-28 15:24 ./source/kde/cmake/bluedevil
+-rw-r--r--   1 root root       503 2012-04-16 02:32 ./source/kde/cmake/calligra
+-rw-r--r--   1 root root       472 2011-07-31 10:24 ./source/kde/cmake/cmake
+-rw-r--r--   1 root root       500 2011-07-31 10:29 ./source/kde/cmake/k3b
+-rw-r--r--   1 root root       481 2011-07-31 10:24 ./source/kde/cmake/kdeaccessibility
+-rw-r--r--   1 root root       492 2011-07-31 10:25 ./source/kde/cmake/kdeadmin
+-rw-r--r--   1 root root       460 2011-07-31 10:25 ./source/kde/cmake/kdeartwork
+-rw-r--r--   1 root root       448 2011-07-31 10:26 ./source/kde/cmake/kdebase
+-rw-r--r--   1 root root       778 2011-07-31 10:27 ./source/kde/cmake/kdebindings
+-rw-r--r--   1 root root       498 2011-07-31 10:27 ./source/kde/cmake/kdelibs
+-rw-r--r--   1 root root       442 2011-07-31 10:27 ./source/kde/cmake/kdenetwork
+-rw-r--r--   1 root root       532 2011-07-31 10:28 ./source/kde/cmake/kdewebdev
+-rw-r--r--   1 root root       260 2011-07-29 09:25 ./source/kde/cmake/kwebkitpart
+-rw-r--r--   1 root root       524 2011-12-16 18:24 ./source/kde/cmake/networkmanagement
+-rw-r--r--   1 root root       594 2011-11-26 14:13 ./source/kde/cmake/perlkde
+-rw-r--r--   1 root root       594 2011-11-26 14:13 ./source/kde/cmake/perlqt
+-rw-r--r--   1 root root       418 2011-07-31 11:04 ./source/kde/cmake/polkit-kde-agent-1
+-rw-r--r--   1 root root       418 2011-07-31 11:04 ./source/kde/cmake/polkit-kde-kcmodules-1
+drwxr-xr-x   2 root root      4096 2011-07-29 01:34 ./source/kde/docs
+-rw-r--r--   1 root root        87 2011-07-29 08:03 ./source/kde/docs/k3b
+-rw-r--r--   1 root root        58 2011-07-29 08:34 ./source/kde/docs/kdepimlibs
+drwxr-xr-x   2 root root      4096 2011-12-14 06:25 ./source/kde/doinst.sh
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/amarok
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/blinken
+-rw-r--r--   1 root root       137 2011-07-28 14:43 ./source/kde/doinst.sh/bluedevil
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/cantor
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/gwenview
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/jovie
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/k3b
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kalgebra
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kalzium
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kamera
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kanagram
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kate
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kaudiocreator
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kbruch
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kcalc
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kcolorchooser
+-rw-r--r--   1 root root       129 2007-12-21 13:11 ./source/kde/doinst.sh/kde-applications
+-rw-r--r--   1 root root       137 2011-07-28 14:44 ./source/kde/doinst.sh/kde-baseapps
+-rw-r--r--   1 root root       126 2011-07-28 14:45 ./source/kde/doinst.sh/kde-runtime
+-rw-r--r--   1 root root       661 2011-07-28 14:45 ./source/kde/doinst.sh/kde-workspace
+-rw-r--r--   1 root root       126 2011-07-28 14:44 ./source/kde/doinst.sh/kdeaccessibility
+-rw-r--r--   1 root root       129 2011-07-28 14:44 ./source/kde/doinst.sh/kdeadmin
+-rw-r--r--   1 root root       129 2011-07-28 14:44 ./source/kde/doinst.sh/kdeartwork
+-rw-r--r--   1 root root       137 2011-07-28 14:44 ./source/kde/doinst.sh/kdebase
+-rw-r--r--   1 root root       129 2011-07-28 14:47 ./source/kde/doinst.sh/kdeedu
+-rw-r--r--   1 root root       129 2011-07-28 14:48 ./source/kde/doinst.sh/kdegames
+-rw-r--r--   1 root root       129 2011-07-28 15:02 ./source/kde/doinst.sh/kdegraphics
+-rw-r--r--   1 root root       242 2011-07-28 15:02 ./source/kde/doinst.sh/kdelibs
+-rw-r--r--   1 root root       126 2011-07-28 15:02 ./source/kde/doinst.sh/kdemultimedia
+-rw-r--r--   1 root root       126 2011-07-28 15:03 ./source/kde/doinst.sh/kdenetwork
+-rw-r--r--   1 root root       129 2011-07-28 15:03 ./source/kde/doinst.sh/kdepim
+-rw-r--r--   1 root root       129 2011-07-28 15:03 ./source/kde/doinst.sh/kdepim-runtime
+-rw-r--r--   1 root root       129 2011-07-28 15:03 ./source/kde/doinst.sh/kdeplasma-addons
+-rw-r--r--   1 root root       129 2011-07-28 15:04 ./source/kde/doinst.sh/kdesdk
+-rw-r--r--   1 root root       129 2011-07-28 15:04 ./source/kde/doinst.sh/kdetoys
+-rw-r--r--   1 root root       126 2011-07-28 15:04 ./source/kde/doinst.sh/kdeutils
+-rw-r--r--   1 root root       129 2011-07-28 15:04 ./source/kde/doinst.sh/kdevelop
+-rw-r--r--   1 root root       129 2011-07-28 15:05 ./source/kde/doinst.sh/kdevplatform
+-rw-r--r--   1 root root       129 2011-07-28 15:05 ./source/kde/doinst.sh/kdewebdev
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kdf
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kgamma
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kgeography
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/khangman
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kig
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kiten
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/klettres
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kmag
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kmousetool
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kmouth
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kmplot
+-rw-r--r--   1 root root       129 2011-07-28 15:05 ./source/kde/doinst.sh/koffice
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kolourpaint
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/konsole
+-rw-r--r--   1 root root       126 2011-07-28 15:05 ./source/kde/doinst.sh/kopete-cryptography
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kruler
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/ksaneplugin
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/ksnapshot
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kstars
+-rw-r--r--   1 root root       129 2011-07-28 15:06 ./source/kde/doinst.sh/ktorrent
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/ktouch
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kturtle
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/kwordquiz
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/marble
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/okular
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/parley
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/rocs
+-rw-r--r--   1 root root       129 2011-07-28 15:07 ./source/kde/doinst.sh/skanlite
+-rw-r--r--   1 root root       129 2011-07-28 14:43 ./source/kde/doinst.sh/step
+-rw-r--r--   1 root root       126 2011-07-28 14:44 ./source/kde/doinst.sh/wicd-kde
+drwxr-xr-x   2 root root      4096 2012-04-14 20:30 ./source/kde/kde-deps-build
+lrwxrwxrwx   1 root root        12 2012-04-13 03:37 ./source/kde/kde-deps-build/PyQt -> ../../l/PyQt
+lrwxrwxrwx   1 root root        18 2012-04-13 03:37 ./source/kde/kde-deps-build/QScintilla -> ../../l/QScintilla
+lrwxrwxrwx   1 root root        15 2012-04-13 03:37 ./source/kde/kde-deps-build/akonadi -> ../../l/akonadi
+-rwxr-xr-x   1 root root      1427 2012-04-08 20:08 ./source/kde/kde-deps-build/alldeps.SlackBuild
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/attica -> ../../l/attica
+lrwxrwxrwx   1 root root        15 2012-04-13 03:37 ./source/kde/kde-deps-build/clucene -> ../../l/clucene
+lrwxrwxrwx   1 root root        19 2012-04-13 03:37 ./source/kde/kde-deps-build/ebook-tools -> ../../l/ebook-tools
+lrwxrwxrwx   1 root root        16 2012-04-13 03:37 ./source/kde/kde-deps-build/grantlee -> ../../l/grantlee
+lrwxrwxrwx   1 root root        13 2012-04-13 03:37 ./source/kde/kde-deps-build/herqq -> ../../l/herqq
+lrwxrwxrwx   1 root root        16 2012-04-13 03:37 ./source/kde/kde-deps-build/hunspell -> ../../l/hunspell
+lrwxrwxrwx   1 root root        13 2012-04-13 03:37 ./source/kde/kde-deps-build/lcms2 -> ../../l/lcms2
+lrwxrwxrwx   1 root root        19 2012-04-13 03:37 ./source/kde/kde-deps-build/libatasmart -> ../../l/libatasmart
+lrwxrwxrwx   1 root root        20 2012-04-13 03:37 ./source/kde/kde-deps-build/libbluedevil -> ../../l/libbluedevil
+lrwxrwxrwx   1 root root        22 2012-04-13 03:37 ./source/kde/kde-deps-build/libdbusmenu-qt -> ../../l/libdbusmenu-qt
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/libmsn -> ../../l/libmsn
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/libssh -> ../../l/libssh
+lrwxrwxrwx   1 root root        20 2012-04-13 03:37 ./source/kde/kde-deps-build/libvncserver -> ../../l/libvncserver
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/phonon -> ../../l/phonon
+lrwxrwxrwx   1 root root        24 2012-04-13 03:37 ./source/kde/kde-deps-build/phonon-gstreamer -> ../../l/phonon-gstreamer
+lrwxrwxrwx   1 root root        22 2012-04-13 03:37 ./source/kde/kde-deps-build/phonon-mplayer -> ../../l/phonon-mplayer
+lrwxrwxrwx   1 root root        19 2012-04-13 03:37 ./source/kde/kde-deps-build/phonon-xine -> ../../l/phonon-xine
+lrwxrwxrwx   1 root root        19 2012-04-13 03:37 ./source/kde/kde-deps-build/polkit-qt-1 -> ../../l/polkit-qt-1
+lrwxrwxrwx   1 root root        10 2012-04-13 03:37 ./source/kde/kde-deps-build/qt -> ../../l/qt
+lrwxrwxrwx   1 root root        15 2012-04-13 03:37 ./source/kde/kde-deps-build/raptor2 -> ../../l/raptor2
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/rasqal -> ../../l/rasqal
+lrwxrwxrwx   1 root root        15 2012-04-13 03:37 ./source/kde/kde-deps-build/redland -> ../../l/redland
+lrwxrwxrwx   1 root root        17 2012-04-13 03:37 ./source/kde/kde-deps-build/sg3_utils -> ../../l/sg3_utils
+lrwxrwxrwx   1 root root        33 2012-04-13 03:37 ./source/kde/kde-deps-build/shared-desktop-ontologies -> ../../l/shared-desktop-ontologies
+lrwxrwxrwx   1 root root        11 2012-04-13 03:37 ./source/kde/kde-deps-build/sip -> ../../l/sip
+lrwxrwxrwx   1 root root        15 2012-04-13 03:37 ./source/kde/kde-deps-build/soprano -> ../../l/soprano
+lrwxrwxrwx   1 root root        14 2012-04-13 03:37 ./source/kde/kde-deps-build/strigi -> ../../l/strigi
+lrwxrwxrwx   1 root root        29 2012-04-13 03:37 ./source/kde/kde-deps-build/system-config-printer -> ../../l/system-config-printer
+lrwxrwxrwx   1 root root        14 2012-04-13 03:40 ./source/kde/kde-deps-build/udisks -> ../../a/udisks
+lrwxrwxrwx   1 root root        14 2012-04-13 03:39 ./source/kde/kde-deps-build/upower -> ../../a/upower
+drwxr-xr-x   2 root root      4096 2011-06-08 12:10 ./source/kde/makepkg
+-rw-r--r--   1 root root      1221 2012-07-26 23:55 ./source/kde/modularize
+drwxr-xr-x   2 root root      4096 2012-07-18 15:42 ./source/kde/modules
+-rw-r--r--   1 root root       192 2012-04-01 11:39 ./source/kde/modules/extragear
+-rw-r--r--   1 root root        61 2011-12-14 21:44 ./source/kde/modules/kdeaccessibility
+-rw-r--r--   1 root root         9 2011-07-28 11:19 ./source/kde/modules/kdeadmin
+-rw-r--r--   1 root root        11 2011-07-28 11:19 ./source/kde/modules/kdeartwork
+-rw-r--r--   1 root root        97 2012-04-02 12:27 ./source/kde/modules/kdebase
+-rw-r--r--   1 root root        96 2012-07-18 15:41 ./source/kde/modules/kdebindings
+-rw-r--r--   1 root root       169 2011-12-14 14:07 ./source/kde/modules/kdeedu
+-rw-r--r--   1 root root         9 2011-07-28 11:20 ./source/kde/modules/kdegames
+-rw-r--r--   1 root root       206 2012-01-18 23:33 ./source/kde/modules/kdegraphics
+-rw-r--r--   1 root root         8 2011-07-28 11:21 ./source/kde/modules/kdelibs
+-rw-r--r--   1 root root        14 2011-07-28 11:21 ./source/kde/modules/kdemultimedia
+-rw-r--r--   1 root root        11 2011-07-28 11:21 ./source/kde/modules/kdenetwork
+-rw-r--r--   1 root root        23 2011-07-29 23:29 ./source/kde/modules/kdepim
+-rw-r--r--   1 root root        11 2011-07-28 11:21 ./source/kde/modules/kdepimlibs
+-rw-r--r--   1 root root        17 2011-07-28 11:22 ./source/kde/modules/kdeplasma-addons
+-rw-r--r--   1 root root         7 2011-07-28 11:22 ./source/kde/modules/kdesdk
+-rw-r--r--   1 root root         8 2011-07-28 11:22 ./source/kde/modules/kdetoys
+-rw-r--r--   1 root root       135 2011-12-21 21:42 ./source/kde/modules/kdeutils
+-rw-r--r--   1 root root        10 2011-07-28 11:22 ./source/kde/modules/kdewebdev
+-rw-r--r--   1 root root        14 2011-07-31 15:54 ./source/kde/modules/oxygen-icons
+-rw-r--r--   1 root root        42 2011-07-29 21:25 ./source/kde/modules/polkit-kde
+-rw-r--r--   1 root root       108 2011-07-31 15:51 ./source/kde/noarch
+-rw-r--r--   1 root root       243 2011-10-30 13:46 ./source/kde/package-blacklist
+drwxr-xr-x   9 root root      4096 2012-08-14 16:36 ./source/kde/patch
+-rw-r--r--   1 root root       328 2011-07-28 17:38 ./source/kde/patch/README
+drwxr-xr-x   2 root root      4096 2012-08-14 16:36 ./source/kde/patch/amarok
+-rw-r--r--   1 root root       169 2012-07-06 09:21 ./source/kde/patch/amarok.patch
+-rw-r--r--   1 root root     27351 2012-08-02 14:34 ./source/kde/patch/amarok/amarok-liblastfm1.patch
+drwxr-xr-x   2 root root      4096 2012-08-07 19:42 ./source/kde/patch/calligra
+-rw-r--r--   1 root root       198 2012-08-07 19:42 ./source/kde/patch/calligra.patch
+-rw-r--r--   1 root root       415 2012-08-07 19:40 ./source/kde/patch/calligra/calligra.words.fix_overflow.diff.gz
+drwxr-xr-x   2 root root      4096 2012-06-20 23:10 ./source/kde/patch/kde-workspace
+-rw-r--r--   1 root root       464 2012-06-20 23:10 ./source/kde/patch/kde-workspace.patch
+-rw-r--r--   1 root root       494 2012-01-28 11:31 ./source/kde/patch/kde-workspace/kde-workspace.batteryapplet.diff.gz
+-rw-r--r--   1 root root       247 2010-12-02 01:13 ./source/kde/patch/kde-workspace/kde-workspace.kdm.server.timeout.diff.gz
+drwxr-xr-x   2 root root      4096 2012-08-07 05:18 ./source/kde/patch/kdelibs
+-rw-r--r--   1 root root       502 2012-08-07 05:18 ./source/kde/patch/kdelibs.patch
+-rw-r--r--   1 root root       361 2010-06-07 15:19 ./source/kde/patch/kdelibs/kdelibs.docbook.patch.gz
+-rw-r--r--   1 root root       587 2012-01-26 08:18 ./source/kde/patch/kdelibs/kdelibs.upnp_conditional.patch
+drwxr-xr-x   2 root root      4096 2012-08-07 07:09 ./source/kde/patch/kdepim
+-rw-r--r--   1 root root       225 2012-08-07 07:09 ./source/kde/patch/kdepim.patch
+-rw-r--r--   1 root root      4458 2010-12-09 22:51 ./source/kde/patch/kdepim/kdepim-4.5.85-install-headers.patch
+drwxr-xr-x   2 root root      4096 2011-07-28 10:49 ./source/kde/patch/kdewebdev
+-rw-r--r--   1 root root       258 2011-07-31 10:45 ./source/kde/patch/kdewebdev.patch
+-rw-r--r--   1 root root       260 2009-09-03 16:03 ./source/kde/patch/kdewebdev/include-tidy.patch.gz
+drwxr-xr-x   2 root root      4096 2012-06-01 04:10 ./source/kde/patch/korundum
+-rw-r--r--   1 root root       219 2012-06-01 11:11 ./source/kde/patch/korundum.patch
+-rw-r--r--   1 root root      1100 2012-06-01 11:10 ./source/kde/patch/korundum/korundum_ruby19.patch
+drwxr-xr-x   4 root root      4096 2012-07-26 23:03 ./source/kde/post-install
+-rw-r--r--   1 root root        90 2011-06-12 23:39 ./source/kde/post-install/k3b.post-install
+drwxr-xr-x   3 root root      4096 2011-07-29 01:16 ./source/kde/post-install/kde-baseapps
+-rw-r--r--   1 root root       342 2012-05-01 08:19 ./source/kde/post-install/kde-baseapps.post-install
+drwxr-xr-x   2 root root      4096 2011-07-29 01:10 ./source/kde/post-install/kde-baseapps/profile.d
+-rw-r--r--   1 root root       274 2008-07-11 03:34 ./source/kde/post-install/kde-baseapps/profile.d/kde.csh
+-rw-r--r--   1 root root       261 2008-07-11 03:33 ./source/kde/post-install/kde-baseapps/profile.d/kde.sh
+-rw-r--r--   1 root root       343 2012-03-04 11:02 ./source/kde/post-install/kde-runtime.post-install
+drwxr-xr-x   4 root root      4096 2011-07-29 01:23 ./source/kde/post-install/kde-workspace
+-rw-r--r--   1 root root      2057 2012-01-28 12:31 ./source/kde/post-install/kde-workspace.post-install
+drwxr-xr-x   2 root root      4096 2011-07-29 01:23 ./source/kde/post-install/kde-workspace/config
+-rw-r--r--   1 root root      2551 2007-12-21 05:56 ./source/kde/post-install/kde-workspace/config/Xsession
+-rw-r--r--   1 root root      1844 2007-12-21 05:53 ./source/kde/post-install/kde-workspace/config/Xsession.orig
+drwxr-xr-x   2 root root      4096 2011-07-29 01:23 ./source/kde/post-install/kde-workspace/xinit
+-rw-r--r--   1 root root       627 2010-06-18 18:08 ./source/kde/post-install/kde-workspace/xinit/xinitrc.kde
+-rw-r--r--   1 root root        97 2011-06-12 23:40 ./source/kde/post-install/kdelibs.post-install
+-rw-r--r--   1 root root        90 2011-06-12 23:39 ./source/kde/post-install/kdepim.post-install
+-rw-r--r--   1 root root       621 2011-07-29 08:10 ./source/kde/post-install/konsole.post-install
+-rw-r--r--   1 root root        90 2011-06-12 23:39 ./source/kde/post-install/wicd-kde.post-install
+drwxr-xr-x   3 root root      4096 2011-07-29 02:12 ./source/kde/pre-install
+-rw-r--r--   1 root root       328 2011-07-28 17:38 ./source/kde/pre-install/README
+-rw-r--r--   1 root root       351 2012-05-17 00:45 ./source/kde/pre-install/amarok.pre-install
+drwxr-xr-x   3 root root      4096 2011-07-29 02:12 ./source/kde/pre-install/kdewebdev
+-rw-r--r--   1 root root       139 2011-07-29 09:12 ./source/kde/pre-install/kdewebdev.pre-install
+drwxr-xr-x   2 root root      4096 2010-06-05 06:37 ./source/kde/pre-install/kdewebdev/tidy
+-rw-r--r--   1 root root      1682 2009-05-07 04:57 ./source/kde/pre-install/kdewebdev/tidy/get-tidy-cvs.sh
+-rw-r--r--   1 root root    338924 2010-05-04 05:09 ./source/kde/pre-install/kdewebdev/tidy/tidy-20100503T2309.tar.xz
+-rwxr-xr-x   1 root root      3271 2010-06-05 13:37 ./source/kde/pre-install/kdewebdev/tidy/tidy.SlackBuild
+-rw-r--r--   1 root root      2907 2010-05-04 05:10 ./source/kde/pre-install/kdewebdev/tidy/tidy.build
+drwxr-xr-x   2 root root      4096 2012-03-04 06:44 ./source/kde/slack-desc
+-rw-r--r--   1 root root       779 2008-05-26 07:10 ./source/kde/slack-desc/amarok
+-rw-r--r--   1 root root       792 2012-04-08 21:02 ./source/kde/slack-desc/analitza
+-rw-r--r--   1 root root       629 2012-04-08 21:02 ./source/kde/slack-desc/ark
+-rw-r--r--   1 root root       689 2012-04-08 21:02 ./source/kde/slack-desc/blinken
+-rw-r--r--   1 root root       694 2012-04-08 21:02 ./source/kde/slack-desc/bluedevil
+-rw-r--r--   1 root root      1021 2012-03-04 14:45 ./source/kde/slack-desc/calligra
+-rw-r--r--   1 root root       847 2012-04-08 21:02 ./source/kde/slack-desc/cantor
+-rw-r--r--   1 root root       997 2012-04-08 21:03 ./source/kde/slack-desc/digikam
+-rw-r--r--   1 root root       818 2012-04-08 21:03 ./source/kde/slack-desc/filelight
+-rw-r--r--   1 root root       801 2012-04-08 21:04 ./source/kde/slack-desc/gwenview
+-rw-r--r--   1 root root       733 2012-04-08 21:04 ./source/kde/slack-desc/jovie
+-rw-r--r--   1 root root       836 2004-06-15 20:08 ./source/kde/slack-desc/k3b
+-rw-r--r--   1 root root       812 2012-04-08 21:04 ./source/kde/slack-desc/kaccessible
+-rw-r--r--   1 root root       841 2012-04-08 21:04 ./source/kde/slack-desc/kactivities
+-rw-r--r--   1 root root       798 2012-04-08 21:05 ./source/kde/slack-desc/kalgebra
+-rw-r--r--   1 root root       696 2012-04-08 21:06 ./source/kde/slack-desc/kalzium
+-rw-r--r--   1 root root       663 2012-04-08 21:06 ./source/kde/slack-desc/kamera
+-rw-r--r--   1 root root       945 2012-04-08 21:07 ./source/kde/slack-desc/kanagram
+-rw-r--r--   1 root root       923 2012-04-08 21:08 ./source/kde/slack-desc/kate
+-rw-r--r--   1 root root       752 2009-12-16 21:08 ./source/kde/slack-desc/kaudiocreator
+-rw-r--r--   1 root root       690 2012-04-08 21:08 ./source/kde/slack-desc/kbruch
+-rw-r--r--   1 root root       722 2012-04-08 21:08 ./source/kde/slack-desc/kcalc
+-rw-r--r--   1 root root       822 2012-04-08 21:08 ./source/kde/slack-desc/kcharselect
+-rw-r--r--   1 root root       745 2012-04-08 21:08 ./source/kde/slack-desc/kcolorchooser
+-rw-r--r--   1 root root       709 2011-07-16 12:26 ./source/kde/slack-desc/kde-base
+-rw-r--r--   1 root root       808 2012-04-08 21:08 ./source/kde/slack-desc/kde-base-artwork
+-rw-r--r--   1 root root       803 2012-04-08 21:08 ./source/kde/slack-desc/kde-baseapps
+-rw-r--r--   1 root root       988 2011-06-19 04:46 ./source/kde/slack-desc/kde-bindings
+-rw-r--r--   1 root root       755 2011-06-12 08:41 ./source/kde/slack-desc/kde-educational
+-rw-r--r--   1 root root       705 2011-07-03 06:14 ./source/kde/slack-desc/kde-runtime
+-rw-r--r--   1 root root       703 2012-04-08 21:09 ./source/kde/slack-desc/kde-wallpapers
+-rw-r--r--   1 root root       764 2011-07-03 06:15 ./source/kde/slack-desc/kde-workspace
+-rw-r--r--   1 root root       863 2012-07-22 16:57 ./source/kde/slack-desc/kdeaccessibility
+-rw-r--r--   1 root root       639 2010-05-04 01:25 ./source/kde/slack-desc/kdeadmin
+-rw-r--r--   1 root root       689 2010-05-04 01:25 ./source/kde/slack-desc/kdeartwork
+-rw-r--r--   1 root root       696 2010-05-04 01:26 ./source/kde/slack-desc/kdebase
+-rw-r--r--   1 root root       757 2010-05-04 01:26 ./source/kde/slack-desc/kdebase-runtime
+-rw-r--r--   1 root root       816 2012-04-08 21:10 ./source/kde/slack-desc/kdebase-workspace
+-rw-r--r--   1 root root       975 2010-05-04 01:27 ./source/kde/slack-desc/kdebindings
+-rw-r--r--   1 root root       638 2010-05-04 01:27 ./source/kde/slack-desc/kdeedu
+-rw-r--r--   1 root root       646 2010-05-04 01:27 ./source/kde/slack-desc/kdegames
+-rw-r--r--   1 root root       807 2009-12-16 21:14 ./source/kde/slack-desc/kdegraphics
+-rw-r--r--   1 root root       873 2012-04-10 16:02 ./source/kde/slack-desc/kdegraphics-mobipocket
+-rw-r--r--   1 root root      1085 2012-04-08 21:10 ./source/kde/slack-desc/kdegraphics-strigi-analyzer
+-rw-r--r--   1 root root       976 2012-04-08 21:10 ./source/kde/slack-desc/kdegraphics-thumbnailers
+-rw-r--r--   1 root root       649 2009-12-16 21:15 ./source/kde/slack-desc/kdelibs
+-rw-r--r--   1 root root       731 2012-04-08 21:11 ./source/kde/slack-desc/kdemultimedia
+-rw-r--r--   1 root root       692 2010-05-04 01:27 ./source/kde/slack-desc/kdenetwork
+-rw-r--r--   1 root root       873 2010-05-04 01:28 ./source/kde/slack-desc/kdepim
+-rw-r--r--   1 root root       972 2010-05-04 01:28 ./source/kde/slack-desc/kdepim-runtime
+-rw-r--r--   1 root root       735 2010-05-04 01:28 ./source/kde/slack-desc/kdepimlibs
+-rw-r--r--   1 root root       763 2009-12-16 21:16 ./source/kde/slack-desc/kdeplasma-addons
+-rw-r--r--   1 root root       778 2010-05-04 01:28 ./source/kde/slack-desc/kdesdk
+-rw-r--r--   1 root root       715 2010-05-04 01:29 ./source/kde/slack-desc/kdetoys
+-rw-r--r--   1 root root       657 2012-04-08 21:12 ./source/kde/slack-desc/kdeutils
+-rw-r--r--   1 root root       679 2009-12-16 21:21 ./source/kde/slack-desc/kdevelop
+-rw-r--r--   1 root root       754 2012-04-08 21:12 ./source/kde/slack-desc/kdevelop-pg-qt
+-rw-r--r--   1 root root       710 2009-01-13 15:04 ./source/kde/slack-desc/kdevplatform
+-rw-r--r--   1 root root       716 2010-05-04 01:31 ./source/kde/slack-desc/kdewebdev
+-rw-r--r--   1 root root       786 2012-04-10 16:09 ./source/kde/slack-desc/kdf
+-rw-r--r--   1 root root       764 2012-04-08 21:13 ./source/kde/slack-desc/kfloppy
+-rw-r--r--   1 root root       688 2012-04-08 21:13 ./source/kde/slack-desc/kgamma
+-rw-r--r--   1 root root       975 2011-07-28 22:22 ./source/kde/slack-desc/kgeography
+-rw-r--r--   1 root root       673 2012-04-08 21:13 ./source/kde/slack-desc/kgpg
+-rw-r--r--   1 root root       880 2012-04-08 21:13 ./source/kde/slack-desc/khangman
+-rw-r--r--   1 root root       741 2012-04-08 21:13 ./source/kde/slack-desc/kig
+-rw-r--r--   1 root root       658 2012-04-08 21:17 ./source/kde/slack-desc/kimono
+-rw-r--r--   1 root root       968 2011-07-15 12:02 ./source/kde/slack-desc/kipi-plugins
+-rw-r--r--   1 root root       651 2012-04-08 21:17 ./source/kde/slack-desc/kiten
+-rw-r--r--   1 root root       862 2012-04-08 21:17 ./source/kde/slack-desc/klettres
+-rw-r--r--   1 root root       627 2012-04-08 21:17 ./source/kde/slack-desc/kmag
+-rw-r--r--   1 root root       726 2012-04-08 21:17 ./source/kde/slack-desc/kmousetool
+-rw-r--r--   1 root root       693 2012-04-08 21:17 ./source/kde/slack-desc/kmouth
+-rw-r--r--   1 root root       991 2011-07-28 22:33 ./source/kde/slack-desc/kmplot
+-rw-r--r--   1 root root       951 2007-12-24 16:26 ./source/kde/slack-desc/koffice
+-rw-r--r--   1 root root      1089 2011-07-30 16:35 ./source/kde/slack-desc/kolourpaint
+-rw-r--r--   1 root root       651 2012-04-08 21:18 ./source/kde/slack-desc/konsole
+-rw-r--r--   1 root root       810 2009-10-21 01:07 ./source/kde/slack-desc/kopete-cryptography
+-rw-r--r--   1 root root       903 2012-04-08 21:18 ./source/kde/slack-desc/korundum
+-rw-r--r--   1 root root       984 2011-07-31 19:43 ./source/kde/slack-desc/kplayer
+-rw-r--r--   1 root root       858 2012-04-08 21:18 ./source/kde/slack-desc/kremotecontrol
+-rw-r--r--   1 root root       845 2012-04-10 16:15 ./source/kde/slack-desc/kross-interpreters
+-rw-r--r--   1 root root       677 2012-04-08 21:18 ./source/kde/slack-desc/kruler
+-rw-r--r--   1 root root       769 2012-04-08 21:19 ./source/kde/slack-desc/ksaneplugin
+-rw-r--r--   1 root root       783 2012-04-08 21:19 ./source/kde/slack-desc/ksecrets
+-rw-r--r--   1 root root       695 2012-04-08 21:19 ./source/kde/slack-desc/ksnapshot
+-rw-r--r--   1 root root       659 2012-04-08 21:21 ./source/kde/slack-desc/kstars
+-rw-r--r--   1 root root       697 2012-04-08 21:22 ./source/kde/slack-desc/ktimer
+-rw-r--r--   1 root root      1005 2012-04-08 21:22 ./source/kde/slack-desc/ktorrent
+-rw-r--r--   1 root root       688 2012-04-08 21:22 ./source/kde/slack-desc/ktouch
+-rw-r--r--   1 root root       702 2012-04-08 21:22 ./source/kde/slack-desc/kturtle
+-rw-r--r--   1 root root       728 2012-04-08 21:23 ./source/kde/slack-desc/kwallet
+-rw-r--r--   1 root root       836 2012-04-08 21:24 ./source/kde/slack-desc/kwebkitpart
+-rw-r--r--   1 root root       795 2012-04-08 21:25 ./source/kde/slack-desc/kwordquiz
+-rw-r--r--   1 root root       777 2012-04-08 21:25 ./source/kde/slack-desc/libkdcraw
+-rw-r--r--   1 root root       677 2011-07-30 16:04 ./source/kde/slack-desc/libkdeedu
+-rw-r--r--   1 root root       772 2012-04-08 21:25 ./source/kde/slack-desc/libkexiv2
+-rw-r--r--   1 root root       804 2012-04-08 21:25 ./source/kde/slack-desc/libkipi
+-rw-r--r--   1 root root       719 2012-04-08 21:26 ./source/kde/slack-desc/libksane
+-rw-r--r--   1 root root       938 2012-04-08 21:26 ./source/kde/slack-desc/libktorrent
+-rw-r--r--   1 root root      1057 2011-07-28 22:44 ./source/kde/slack-desc/marble
+-rw-r--r--   1 root root       845 2012-04-08 21:27 ./source/kde/slack-desc/networkmanagement
+-rw-r--r--   1 root root       658 2012-04-08 21:27 ./source/kde/slack-desc/okular
+-rw-r--r--   1 root root      1108 2012-04-10 17:13 ./source/kde/slack-desc/oxygen-gtk2
+-rw-r--r--   1 root root       792 2012-04-08 21:28 ./source/kde/slack-desc/oxygen-icons
+-rw-r--r--   1 root root       663 2012-04-08 21:28 ./source/kde/slack-desc/parley
+-rw-r--r--   1 root root       661 2012-04-08 21:28 ./source/kde/slack-desc/perlkde
+-rw-r--r--   1 root root       762 2012-04-08 21:28 ./source/kde/slack-desc/perlqt
+-rw-r--r--   1 root root       779 2012-07-22 16:57 ./source/kde/slack-desc/polkit-kde-agent-1
+-rw-r--r--   1 root root       836 2012-07-22 16:58 ./source/kde/slack-desc/polkit-kde-kcmodules-1
+-rw-r--r--   1 root root       903 2012-04-08 21:28 ./source/kde/slack-desc/polkit-qt-1
+-rw-r--r--   1 root root       841 2012-04-08 21:29 ./source/kde/slack-desc/printer-applet
+-rw-r--r--   1 root root       718 2012-04-08 21:29 ./source/kde/slack-desc/prison
+-rw-r--r--   1 root root       654 2012-04-08 21:29 ./source/kde/slack-desc/pykde4
+-rw-r--r--   1 root root       905 2012-04-10 16:24 ./source/kde/slack-desc/qtruby
+-rw-r--r--   1 root root       845 2012-04-08 21:30 ./source/kde/slack-desc/quanta
+-rw-r--r--   1 root root       643 2012-04-08 21:30 ./source/kde/slack-desc/qyoto
+-rw-r--r--   1 root root       651 2012-04-08 21:30 ./source/kde/slack-desc/rocs
+-rw-r--r--   1 root root       666 2009-01-14 00:18 ./source/kde/slack-desc/skanlite
+-rw-r--r--   1 root root       817 2012-04-08 21:32 ./source/kde/slack-desc/smokegen
+-rw-r--r--   1 root root       664 2012-04-08 21:32 ./source/kde/slack-desc/smokekde
+-rw-r--r--   1 root root       691 2012-04-08 21:32 ./source/kde/slack-desc/smokeqt
+-rw-r--r--   1 root root       915 2012-04-08 21:32 ./source/kde/slack-desc/step
+-rw-r--r--   1 root root       965 2008-08-01 01:27 ./source/kde/slack-desc/strigi
+-rw-r--r--   1 root root       825 2012-04-08 21:33 ./source/kde/slack-desc/superkaramba
+-rw-r--r--   1 root root       671 2012-04-08 21:33 ./source/kde/slack-desc/svgpart
+-rw-r--r--   1 root root       741 2012-04-08 21:33 ./source/kde/slack-desc/sweeper
+-rw-r--r--   1 root root       775 2012-04-08 21:33 ./source/kde/slack-desc/wicd-kde
+drwxr-xr-x   3 root root      4096 2012-08-07 05:13 ./source/kde/src
+-rw-r--r--   1 root root    146492 2012-07-30 17:32 ./source/kde/src/analitza-4.8.5.tar.xz
+-rw-r--r--   1 root root    238968 2012-07-30 17:33 ./source/kde/src/ark-4.8.5.tar.xz
+-rw-r--r--   1 root root    567164 2012-07-30 17:32 ./source/kde/src/blinken-4.8.5.tar.xz
+-rw-r--r--   1 root root    273376 2012-07-30 17:33 ./source/kde/src/cantor-4.8.5.tar.xz
+drwxr-xr-x   2 root root      4096 2012-08-14 16:35 ./source/kde/src/extragear
+-rw-r--r--   1 root root  39090864 2012-08-11 10:21 ./source/kde/src/extragear/amarok-2.6.0.tar.xz
+-rw-r--r--   1 root root    196148 2012-04-29 06:36 ./source/kde/src/extragear/bluedevil-1.2.3.tar.xz
+-rw-r--r--   1 root root  91916352 2012-06-26 07:16 ./source/kde/src/extragear/calligra-2.4.3.tar.xz
+-rw-r--r--   1 root root   6362832 2012-03-04 11:59 ./source/kde/src/extragear/k3b-2.0.2_20120226.git.tar.xz
+-rw-r--r--   1 root root    268876 2011-09-09 16:08 ./source/kde/src/extragear/kaudiocreator-1.3.tar.xz
+-rw-r--r--   1 root root   4775116 2012-04-13 21:40 ./source/kde/src/extragear/kdevelop-4.3.1.tar.xz
+-rw-r--r--   1 root root    626652 2012-01-27 22:01 ./source/kde/src/extragear/kdevelop-pg-qt-1.0.0.tar.xz
+-rw-r--r--   1 root root   1645472 2012-04-13 21:40 ./source/kde/src/extragear/kdevplatform-1.3.1.tar.xz
+-rw-r--r--   1 root root   5546012 2012-04-01 10:44 ./source/kde/src/extragear/kplayer-0.7.2.tar.xz
+-rw-r--r--   1 root root   2080876 2012-06-12 10:40 ./source/kde/src/extragear/ktorrent-4.2.1.tar.xz
+-rw-r--r--   1 root root     92796 2011-12-03 12:36 ./source/kde/src/extragear/kwebkitpart-1.2.0_20111116git.tar.xz
+-rw-r--r--   1 root root    772024 2012-06-22 00:29 ./source/kde/src/extragear/libktorrent-1.2.1_2.tar.xz
+-rw-r--r--   1 root root   1090728 2012-03-04 11:24 ./source/kde/src/extragear/networkmanagement-0.9.0.tar.xz
+-rw-r--r--   1 root root    191600 2012-07-16 17:18 ./source/kde/src/extragear/oxygen-gtk2-1.3.0.tar.xz
+-rw-r--r--   1 root root     17004 2012-01-22 19:37 ./source/kde/src/extragear/polkit-kde-agent-1-9d74ae3_20120104git.tar.xz
+-rw-r--r--   1 root root     30304 2012-01-22 19:39 ./source/kde/src/extragear/polkit-kde-kcmodules-1-001bdf7_20120111git.tar.xz
+-rw-r--r--   1 root root   2101384 2012-01-22 21:51 ./source/kde/src/extragear/quanta-29a3f8e_20111223git.tar.xz
+-rw-r--r--   1 root root   2596580 2011-12-18 21:38 ./source/kde/src/extragear/skanlite-0.8.tar.xz
+-rw-r--r--   1 root root     43760 2012-03-04 11:54 ./source/kde/src/extragear/wicd-kde-0.3.0_bcf27d8.tar.xz
+-rw-r--r--   1 root root    296672 2012-07-30 17:33 ./source/kde/src/filelight-4.8.5.tar.xz
+-rw-r--r--   1 root root   2058952 2012-07-30 17:33 ./source/kde/src/gwenview-4.8.5.tar.xz
+-rw-r--r--   1 root root    371264 2012-07-30 17:32 ./source/kde/src/jovie-4.8.5.tar.xz
+-rw-r--r--   1 root root     21024 2012-07-30 17:32 ./source/kde/src/kaccessible-4.8.5.tar.xz
+-rw-r--r--   1 root root     42952 2012-07-30 17:32 ./source/kde/src/kactivities-4.8.5.tar.xz
+-rw-r--r--   1 root root    424896 2012-07-30 17:32 ./source/kde/src/kalgebra-4.8.5.tar.xz
+-rw-r--r--   1 root root   3690048 2012-07-30 17:32 ./source/kde/src/kalzium-4.8.5.tar.xz
+-rw-r--r--   1 root root     37908 2012-07-30 17:32 ./source/kde/src/kamera-4.8.5.tar.xz
+-rw-r--r--   1 root root    623328 2012-07-30 17:32 ./source/kde/src/kanagram-4.8.5.tar.xz
+-rw-r--r--   1 root root   2228200 2012-07-30 17:32 ./source/kde/src/kate-4.8.5.tar.xz
+-rw-r--r--   1 root root    910188 2012-07-30 17:32 ./source/kde/src/kbruch-4.8.5.tar.xz
+-rw-r--r--   1 root root     89476 2012-07-30 17:33 ./source/kde/src/kcalc-4.8.5.tar.xz
+-rw-r--r--   1 root root     86820 2012-07-30 17:32 ./source/kde/src/kcharselect-4.8.5.tar.xz
+-rw-r--r--   1 root root      4732 2012-07-30 17:33 ./source/kde/src/kcolorchooser-4.8.5.tar.xz
+-rw-r--r--   1 root root   2781216 2012-07-30 17:32 ./source/kde/src/kde-baseapps-4.8.5.tar.xz
+-rw-r--r--   1 root root   6060896 2012-07-30 17:32 ./source/kde/src/kde-runtime-4.8.5.tar.xz
+-rw-r--r--   1 root root  77372832 2012-07-30 17:33 ./source/kde/src/kde-wallpapers-4.8.5.tar.xz
+-rw-r--r--   1 root root  21475948 2012-07-30 17:32 ./source/kde/src/kde-workspace-4.8.5.tar.xz
+-rw-r--r--   1 root root   1169604 2012-07-30 17:33 ./source/kde/src/kdeadmin-4.8.5.tar.xz
+-rw-r--r--   1 root root 140394904 2012-07-30 17:33 ./source/kde/src/kdeartwork-4.8.5.tar.xz
+-rw-r--r--   1 root root  60016908 2012-07-30 17:32 ./source/kde/src/kdegames-4.8.5.tar.xz
+-rw-r--r--   1 root root     20620 2012-07-30 17:32 ./source/kde/src/kdegraphics-mobipocket-4.8.5.tar.xz
+-rw-r--r--   1 root root     41748 2012-07-30 17:32 ./source/kde/src/kdegraphics-strigi-analyzer-4.8.5.tar.xz
+-rw-r--r--   1 root root     42016 2012-07-30 17:32 ./source/kde/src/kdegraphics-thumbnailers-4.8.5.tar.xz
+-rw-r--r--   1 root root  12205348 2012-08-02 08:59 ./source/kde/src/kdelibs-4.8.5.tar.xz
+-rw-r--r--   1 root root   1499072 2012-07-31 16:26 ./source/kde/src/kdemultimedia-4.8.5.tar.xz
+-rw-r--r--   1 root root   9255160 2012-07-30 17:32 ./source/kde/src/kdenetwork-4.8.5.tar.xz
+-rw-r--r--   1 root root  14616744 2012-07-30 17:32 ./source/kde/src/kdepim-4.8.5.tar.xz
+-rw-r--r--   1 root root   1185324 2012-07-30 17:32 ./source/kde/src/kdepim-runtime-4.8.5.tar.xz
+-rw-r--r--   1 root root   2862088 2012-07-30 17:32 ./source/kde/src/kdepimlibs-4.8.5.tar.xz
+-rw-r--r--   1 root root   1774328 2012-07-30 17:32 ./source/kde/src/kdeplasma-addons-4.8.5.tar.xz
+-rw-r--r--   1 root root   5371964 2012-07-30 17:32 ./source/kde/src/kdesdk-4.8.5.tar.xz
+-rw-r--r--   1 root root    391748 2012-07-30 17:32 ./source/kde/src/kdetoys-4.8.5.tar.xz
+-rw-r--r--   1 root root   2603660 2012-07-30 17:32 ./source/kde/src/kdewebdev-4.8.5.tar.xz
+-rw-r--r--   1 root root    157656 2012-07-30 17:32 ./source/kde/src/kdf-4.8.5.tar.xz
+-rw-r--r--   1 root root     61868 2012-07-30 17:32 ./source/kde/src/kfloppy-4.8.5.tar.xz
+-rw-r--r--   1 root root     27584 2012-07-30 17:32 ./source/kde/src/kgamma-4.8.5.tar.xz
+-rw-r--r--   1 root root   6768516 2012-07-30 17:33 ./source/kde/src/kgeography-4.8.5.tar.xz
+-rw-r--r--   1 root root    817412 2012-07-30 17:32 ./source/kde/src/kgpg-4.8.5.tar.xz
+-rw-r--r--   1 root root   1154924 2012-07-30 17:32 ./source/kde/src/khangman-4.8.5.tar.xz
+-rw-r--r--   1 root root   1529720 2012-07-30 17:32 ./source/kde/src/kig-4.8.5.tar.xz
+-rw-r--r--   1 root root    983492 2012-07-30 17:32 ./source/kde/src/kimono-4.8.5.tar.xz
+-rw-r--r--   1 root root  12039840 2012-07-30 17:32 ./source/kde/src/kiten-4.8.5.tar.xz
+-rw-r--r--   1 root root   2658280 2012-07-30 17:32 ./source/kde/src/klettres-4.8.5.tar.xz
+-rw-r--r--   1 root root     93416 2012-07-30 17:32 ./source/kde/src/kmag-4.8.5.tar.xz
+-rw-r--r--   1 root root     46364 2012-07-30 17:32 ./source/kde/src/kmousetool-4.8.5.tar.xz
+-rw-r--r--   1 root root    323320 2012-07-30 17:32 ./source/kde/src/kmouth-4.8.5.tar.xz
+-rw-r--r--   1 root root    682348 2012-07-30 17:32 ./source/kde/src/kmplot-4.8.5.tar.xz
+-rw-r--r--   1 root root   1193420 2012-07-30 17:32 ./source/kde/src/kolourpaint-4.8.5.tar.xz
+-rw-r--r--   1 root root    442040 2012-07-30 17:32 ./source/kde/src/konsole-4.8.5.tar.xz
+-rw-r--r--   1 root root    167244 2012-07-30 17:32 ./source/kde/src/korundum-4.8.5.tar.xz
+-rw-r--r--   1 root root   1083996 2012-07-30 17:32 ./source/kde/src/kremotecontrol-4.8.5.tar.xz
+-rw-r--r--   1 root root    134712 2012-07-30 17:32 ./source/kde/src/kross-interpreters-4.8.5.tar.xz
+-rw-r--r--   1 root root    134784 2012-07-30 17:32 ./source/kde/src/kruler-4.8.5.tar.xz
+-rw-r--r--   1 root root     13644 2012-07-30 17:33 ./source/kde/src/ksaneplugin-4.8.5.tar.xz
+-rw-r--r--   1 root root    153220 2012-07-30 17:33 ./source/kde/src/ksecrets-4.8.5.tar.xz
+-rw-r--r--   1 root root    264984 2012-07-30 17:32 ./source/kde/src/ksnapshot-4.8.5.tar.xz
+-rw-r--r--   1 root root  12344084 2012-07-30 17:32 ./source/kde/src/kstars-4.8.5.tar.xz
+-rw-r--r--   1 root root    151280 2012-07-30 17:32 ./source/kde/src/ktimer-4.8.5.tar.xz
+-rw-r--r--   1 root root   1726852 2012-07-30 17:32 ./source/kde/src/ktouch-4.8.5.tar.xz
+-rw-r--r--   1 root root    216668 2012-07-30 17:32 ./source/kde/src/kturtle-4.8.5.tar.xz
+-rw-r--r--   1 root root    283592 2012-07-30 17:32 ./source/kde/src/kwallet-4.8.5.tar.xz
+-rw-r--r--   1 root root   1217416 2012-07-30 17:32 ./source/kde/src/kwordquiz-4.8.5.tar.xz
+-rw-r--r--   1 root root    271116 2012-07-30 17:32 ./source/kde/src/libkdcraw-4.8.5.tar.xz
+-rw-r--r--   1 root root    214244 2012-07-30 17:32 ./source/kde/src/libkdeedu-4.8.5.tar.xz
+-rw-r--r--   1 root root    134956 2012-07-30 17:32 ./source/kde/src/libkexiv2-4.8.5.tar.xz
+-rw-r--r--   1 root root     73204 2012-07-30 17:32 ./source/kde/src/libkipi-4.8.5.tar.xz
+-rw-r--r--   1 root root     83068 2012-07-30 17:32 ./source/kde/src/libksane-4.8.5.tar.xz
+-rw-r--r--   1 root root  19899400 2012-07-30 17:32 ./source/kde/src/marble-4.8.5.tar.xz
+-rw-r--r--   1 root root   1115100 2012-07-30 17:32 ./source/kde/src/okular-4.8.5.tar.xz
+-rw-r--r--   1 root root 315535476 2012-07-30 17:32 ./source/kde/src/oxygen-icons-4.8.5.tar.xz
+-rw-r--r--   1 root root   8222864 2012-07-30 17:32 ./source/kde/src/parley-4.8.5.tar.xz
+-rw-r--r--   1 root root     47336 2012-07-30 17:32 ./source/kde/src/perlkde-4.8.5.tar.xz
+-rw-r--r--   1 root root   1852184 2012-07-30 17:32 ./source/kde/src/perlqt-4.8.5.tar.xz
+-rw-r--r--   1 root root     37080 2012-07-30 17:32 ./source/kde/src/printer-applet-4.8.5.tar.xz
+-rw-r--r--   1 root root   2110444 2012-07-30 17:32 ./source/kde/src/pykde4-4.8.5.tar.xz
+-rw-r--r--   1 root root    547364 2012-07-30 17:32 ./source/kde/src/qtruby-4.8.5.tar.xz
+-rw-r--r--   1 root root    536124 2012-07-30 17:32 ./source/kde/src/qyoto-4.8.5.tar.xz
+-rw-r--r--   1 root root    665856 2012-07-30 17:32 ./source/kde/src/rocs-4.8.5.tar.xz
+-rw-r--r--   1 root root    151392 2012-07-30 17:32 ./source/kde/src/smokegen-4.8.5.tar.xz
+-rw-r--r--   1 root root     40508 2012-07-30 17:32 ./source/kde/src/smokekde-4.8.5.tar.xz
+-rw-r--r--   1 root root     33452 2012-07-30 17:33 ./source/kde/src/smokeqt-4.8.5.tar.xz
+-rw-r--r--   1 root root    378056 2012-07-30 17:32 ./source/kde/src/step-4.8.5.tar.xz
+-rw-r--r--   1 root root    394092 2012-07-30 17:32 ./source/kde/src/superkaramba-4.8.5.tar.xz
+-rw-r--r--   1 root root      9344 2012-07-30 17:33 ./source/kde/src/svgpart-4.8.5.tar.xz
+-rw-r--r--   1 root root     84872 2012-07-30 17:32 ./source/kde/src/sweeper-4.8.5.tar.xz
+drwxr-xr-x   4 root root      4096 2012-06-21 02:39 ./source/kdei
+drwxr-xr-x   3 root root      4096 2012-07-05 03:25 ./source/kdei/calligra-l10n
+-rw-r--r--   1 root root    402452 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-ca-2.4.3.tar.xz
+-rw-r--r--   1 root root    261800 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-ca@valencia-2.4.3.tar.xz
+-rw-r--r--   1 root root    331576 2012-06-26 07:20 ./source/kdei/calligra-l10n/calligra-l10n-cs-2.4.3.tar.xz
+-rw-r--r--   1 root root    509168 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-da-2.4.3.tar.xz
+-rw-r--r--   1 root root    650832 2012-06-26 07:20 ./source/kdei/calligra-l10n/calligra-l10n-de-2.4.3.tar.xz
+-rw-r--r--   1 root root    407924 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-el-2.4.3.tar.xz
+-rw-r--r--   1 root root    350616 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-en_GB-2.4.3.tar.xz
+-rw-r--r--   1 root root   4109816 2012-06-26 07:20 ./source/kdei/calligra-l10n/calligra-l10n-es-2.4.3.tar.xz
+-rw-r--r--   1 root root    652648 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-et-2.4.3.tar.xz
+-rw-r--r--   1 root root    385680 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-fi-2.4.3.tar.xz
+-rw-r--r--   1 root root   5299428 2012-06-26 07:19 ./source/kdei/calligra-l10n/calligra-l10n-fr-2.4.3.tar.xz
+-rw-r--r--   1 root root    416100 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-hu-2.4.3.tar.xz
+-rw-r--r--   1 root root    590276 2012-06-26 07:19 ./source/kdei/calligra-l10n/calligra-l10n-it-2.4.3.tar.xz
+-rw-r--r--   1 root root    326880 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-ja-2.4.3.tar.xz
+-rw-r--r--   1 root root    398320 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-kk-2.4.3.tar.xz
+-rw-r--r--   1 root root    348184 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-nb-2.4.3.tar.xz
+-rw-r--r--   1 root root    390796 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-nds-2.4.3.tar.xz
+-rw-r--r--   1 root root   2954716 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-nl-2.4.3.tar.xz
+-rw-r--r--   1 root root    404884 2012-06-26 07:19 ./source/kdei/calligra-l10n/calligra-l10n-pl-2.4.3.tar.xz
+-rw-r--r--   1 root root    604548 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-pt-2.4.3.tar.xz
+-rw-r--r--   1 root root    680652 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-pt_BR-2.4.3.tar.xz
+-rw-r--r--   1 root root    565808 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-ru-2.4.3.tar.xz
+-rw-r--r--   1 root root    351912 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-sk-2.4.3.tar.xz
+-rw-r--r--   1 root root   1940500 2012-06-26 07:17 ./source/kdei/calligra-l10n/calligra-l10n-sv-2.4.3.tar.xz
+-rw-r--r--   1 root root   2037096 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-uk-2.4.3.tar.xz
+-rw-r--r--   1 root root    337980 2012-06-26 07:19 ./source/kdei/calligra-l10n/calligra-l10n-zh_CN-2.4.3.tar.xz
+-rw-r--r--   1 root root    375784 2012-06-26 07:18 ./source/kdei/calligra-l10n/calligra-l10n-zh_TW-2.4.3.tar.xz
+-rwxr-xr-x   1 root root      4167 2012-07-05 03:26 ./source/kdei/calligra-l10n/calligra-l10n.SlackBuild
+-rw-r--r--   1 root root       100 2012-06-21 14:47 ./source/kdei/calligra-l10n/languages
+drwxr-xr-x   2 root root      4096 2012-03-04 14:59 ./source/kdei/calligra-l10n/slack-desc
+-rw-r--r--   1 root root       722 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-af
+-rw-r--r--   1 root root       253 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ar
+-rw-r--r--   1 root root       724 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-az
+-rw-r--r--   1 root root       256 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bg
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-br
+-rw-r--r--   1 root root       254 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bs
+-rw-r--r--   1 root root       254 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca
+-rw-r--r--   1 root root       383 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca@valencia
+-rw-r--r--   1 root root       718 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cs
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cy
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-da
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-de
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-el
+-rw-r--r--   1 root root       764 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-en_GB
+-rw-r--r--   1 root root       722 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eo
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-es
+-rw-r--r--   1 root root       721 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-et
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eu
+-rw-r--r--   1 root root       262 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fa
+-rw-r--r--   1 root root       254 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fi
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fr
+-rw-r--r--   1 root root       256 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fy
+-rw-r--r--   1 root root       725 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ga
+-rw-r--r--   1 root root       721 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-gl
+-rw-r--r--   1 root root       253 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-he
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hi
+-rw-r--r--   1 root root       272 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hne
+-rw-r--r--   1 root root       272 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hsb
+-rw-r--r--   1 root root       722 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hu
+-rw-r--r--   1 root root       256 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-is
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-it
+-rw-r--r--   1 root root       721 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ja
+-rw-r--r--   1 root root       253 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-kk
+-rw-r--r--   1 root root       718 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-km
+-rw-r--r--   1 root root       250 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lo
+-rw-r--r--   1 root root       723 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lt
+-rw-r--r--   1 root root       254 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lv
+-rw-r--r--   1 root root       257 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mk
+-rw-r--r--   1 root root       718 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ms
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mt
+-rw-r--r--   1 root root       266 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nb
+-rw-r--r--   1 root root       268 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nds
+-rw-r--r--   1 root root       253 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ne
+-rw-r--r--   1 root root       718 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nl
+-rw-r--r--   1 root root       266 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nn
+-rw-r--r--   1 root root       732 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no
+-rw-r--r--   1 root root       771 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no_NY
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pl
+-rw-r--r--   1 root root       723 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt
+-rw-r--r--   1 root root       769 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt_BR
+-rw-r--r--   1 root root       721 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ro
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ru
+-rw-r--r--   1 root root       726 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-se
+-rw-r--r--   1 root root       719 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sk
+-rw-r--r--   1 root root       722 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sl
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr
+-rw-r--r--   1 root root       801 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr@Latn
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sv
+-rw-r--r--   1 root root       718 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ta
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tg
+-rw-r--r--   1 root root       251 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-th
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tr
+-rw-r--r--   1 root root       722 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uk
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uz
+-rw-r--r--   1 root root       264 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ven
+-rw-r--r--   1 root root       720 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-wa
+-rw-r--r--   1 root root       252 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-xh
+-rw-r--r--   1 root root       301 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_CN
+-rw-r--r--   1 root root       290 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_TW
+-rw-r--r--   1 root root       251 2012-03-04 14:56 ./source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zu
+drwxr-xr-x   5 root root      4096 2012-08-08 02:39 ./source/kdei/kde-l10n
+-rw-r--r--   1 root root   3361976 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ar-4.8.5.tar.xz
+-rw-r--r--   1 root root   2026312 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-bg-4.8.5.tar.xz
+-rw-r--r--   1 root root   2304760 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-bs-4.8.5.tar.xz
+-rw-r--r--   1 root root   9570676 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ca-4.8.5.tar.xz
+-rw-r--r--   1 root root   2236348 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ca@valencia-4.8.5.tar.xz
+-rw-r--r--   1 root root   3170580 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-cs-4.8.5.tar.xz
+-rw-r--r--   1 root root  13490416 2012-08-08 02:38 ./source/kdei/kde-l10n/kde-l10n-da-4.8.5.tar.xz
+-rw-r--r--   1 root root  36520860 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-de-4.8.5.tar.xz
+-rw-r--r--   1 root root   4788628 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-el-4.8.5.tar.xz
+-rw-r--r--   1 root root   3185380 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-en_GB-4.8.5.tar.xz
+-rw-r--r--   1 root root  23276904 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-es-4.8.5.tar.xz
+-rw-r--r--   1 root root   7442932 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-et-4.8.5.tar.xz
+-rw-r--r--   1 root root   2103708 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-eu-4.8.5.tar.xz
+-rw-r--r--   1 root root   1963184 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-fa-4.8.5.tar.xz
+-rw-r--r--   1 root root   2632204 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-fi-4.8.5.tar.xz
+-rw-r--r--   1 root root  36927184 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-fr-4.8.5.tar.xz
+-rw-r--r--   1 root root   2892352 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ga-4.8.5.tar.xz
+-rw-r--r--   1 root root   3748868 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-gl-4.8.5.tar.xz
+-rw-r--r--   1 root root   2162616 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-he-4.8.5.tar.xz
+-rw-r--r--   1 root root   2064196 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-hr-4.8.5.tar.xz
+-rw-r--r--   1 root root   4211804 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-hu-4.8.5.tar.xz
+-rw-r--r--   1 root root   1302716 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ia-4.8.5.tar.xz
+-rw-r--r--   1 root root    518684 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-id-4.8.5.tar.xz
+-rw-r--r--   1 root root   1898236 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-is-4.8.5.tar.xz
+-rw-r--r--   1 root root  10498984 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-it-4.8.5.tar.xz
+-rw-r--r--   1 root root   2331988 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ja-4.8.5.tar.xz
+-rw-r--r--   1 root root   2555896 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-kk-4.8.5.tar.xz
+-rw-r--r--   1 root root   2211760 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-km-4.8.5.tar.xz
+-rw-r--r--   1 root root   1851064 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ko-4.8.5.tar.xz
+-rw-r--r--   1 root root  10610012 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-lt-4.8.5.tar.xz
+-rw-r--r--   1 root root   2194640 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-lv-4.8.5.tar.xz
+-rw-r--r--   1 root root   2479688 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-nb-4.8.5.tar.xz
+-rw-r--r--   1 root root   3193404 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-nds-4.8.5.tar.xz
+-rw-r--r--   1 root root  15844656 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-nl-4.8.5.tar.xz
+-rw-r--r--   1 root root   2011432 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-nn-4.8.5.tar.xz
+-rw-r--r--   1 root root   1914756 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-pa-4.8.5.tar.xz
+-rw-r--r--   1 root root  16896268 2012-08-05 21:05 ./source/kdei/kde-l10n/kde-l10n-pl-4.8.5.tar.xz
+-rw-r--r--   1 root root   5829092 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-pt-4.8.5.tar.xz
+-rw-r--r--   1 root root  27197844 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-pt_BR-4.8.5.tar.xz
+-rw-r--r--   1 root root   2964424 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ro-4.8.5.tar.xz
+-rw-r--r--   1 root root  23607772 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ru-4.8.5.tar.xz
+-rw-r--r--   1 root root   1074060 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-si-4.8.5.tar.xz
+-rw-r--r--   1 root root   4360340 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-sk-4.8.5.tar.xz
+-rw-r--r--   1 root root   3331560 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-sl-4.8.5.tar.xz
+-rw-r--r--   1 root root   6221632 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-sr-4.8.5.tar.xz
+-rw-r--r--   1 root root  16890468 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-sv-4.8.5.tar.xz
+-rw-r--r--   1 root root   2000996 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-tg-4.8.5.tar.xz
+-rw-r--r--   1 root root   1721572 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-th-4.8.5.tar.xz
+-rw-r--r--   1 root root   2511268 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-tr-4.8.5.tar.xz
+-rw-r--r--   1 root root   1755068 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-ug-4.8.5.tar.xz
+-rw-r--r--   1 root root  22390000 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-uk-4.8.5.tar.xz
+-rw-r--r--   1 root root    924360 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-vi-4.8.5.tar.xz
+-rw-r--r--   1 root root   1750260 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-wa-4.8.5.tar.xz
+-rw-r--r--   1 root root   3557508 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-zh_CN-4.8.5.tar.xz
+-rw-r--r--   1 root root   2563268 2012-07-30 17:55 ./source/kdei/kde-l10n/kde-l10n-zh_TW-4.8.5.tar.xz
+-rwxr-xr-x   1 root root      5501 2012-08-07 05:19 ./source/kdei/kde-l10n/kde-l10n.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-07 15:55 ./source/kdei/kde-l10n/kdepim-l10n
+-rw-r--r--   1 root root      1047 2011-01-23 16:36 ./source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh
+-rw-r--r--   1 root root       187 2012-08-07 12:27 ./source/kdei/kde-l10n/languages
+drwxr-xr-x   2 root root      4096 2008-05-26 01:17 ./source/kdei/kde-l10n/local.options
+drwxr-xr-x   2 root root      4096 2012-01-16 12:17 ./source/kdei/kde-l10n/slack-desc
+-rw-r--r--   1 root root       188 2009-01-21 22:32 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ar
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bg
+-rw-r--r--   1 root root       225 2009-03-06 20:29 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bn_IN
+-rw-r--r--   1 root root       189 2011-07-31 20:33 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bs
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca
+-rw-r--r--   1 root root       309 2012-04-10 16:45 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-cs
+-rw-r--r--   1 root root       203 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-csb
+-rw-r--r--   1 root root       188 2008-07-26 02:24 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-da
+-rw-r--r--   1 root root       188 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-de
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-el
+-rw-r--r--   1 root root       230 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-en_GB
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eo
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-es
+-rw-r--r--   1 root root       190 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-et
+-rw-r--r--   1 root root       188 2009-03-06 22:05 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eu
+-rw-r--r--   1 root root       187 2012-01-16 20:16 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fa
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fi
+-rw-r--r--   1 root root       188 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fr
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fy
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ga
+-rw-r--r--   1 root root       190 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gl
+-rw-r--r--   1 root root       190 2009-01-21 22:33 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gu
+-rw-r--r--   1 root root       188 2009-01-21 22:34 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-he
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hi
+-rw-r--r--   1 root root       207 2009-10-21 04:40 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne
+-rw-r--r--   1 root root       190 2009-10-21 04:42 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hu
+-rw-r--r--   1 root root       193 2010-12-08 05:34 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ia
+-rw-r--r--   1 root root       192 2010-02-05 09:17 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id
+-rw-r--r--   1 root root       191 2009-03-06 22:06 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-is
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-it
+-rw-r--r--   1 root root       190 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ja
+-rw-r--r--   1 root root       188 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kk
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-km
+-rw-r--r--   1 root root       189 2009-03-06 20:30 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kn
+-rw-r--r--   1 root root       188 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ko
+-rw-r--r--   1 root root       189 2008-07-26 02:59 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ku
+-rw-r--r--   1 root root       192 2008-07-26 02:58 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lt
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lv
+-rw-r--r--   1 root root       202 2009-01-27 05:28 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mai
+-rw-r--r--   1 root root       192 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mk
+-rw-r--r--   1 root root       191 2008-07-26 02:59 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ml
+-rw-r--r--   1 root root       189 2009-03-06 20:31 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mr
+-rw-r--r--   1 root root       201 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nb
+-rw-r--r--   1 root root       203 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nds
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nl
+-rw-r--r--   1 root root       201 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nn
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pa
+-rw-r--r--   1 root root       188 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pl
+-rw-r--r--   1 root root       192 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt
+-rw-r--r--   1 root root       238 2008-05-26 08:01 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt_BR
+-rw-r--r--   1 root root       190 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ro
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ru
+-rw-r--r--   1 root root       189 2010-01-21 09:25 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si
+-rw-r--r--   1 root root       188 2009-04-03 22:25 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sk
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sl
+-rw-r--r--   1 root root       189 2008-07-26 02:58 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sr
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sv
+-rw-r--r--   1 root root       187 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ta
+-rw-r--r--   1 root root       187 2009-03-06 22:07 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tg
+-rw-r--r--   1 root root       186 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-th
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tr
+-rw-r--r--   1 root root       188 2011-07-31 20:34 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ug
+-rw-r--r--   1 root root       191 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-uk
+-rw-r--r--   1 root root       192 2012-01-16 20:17 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-vi
+-rw-r--r--   1 root root       189 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-wa
+-rw-r--r--   1 root root       236 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_CN
+-rw-r--r--   1 root root       225 2008-05-26 07:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_TW
+drwxr-xr-x 228 root root      4096 2012-09-23 18:03 ./source/l
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/ConsoleKit
+-rw-r--r--   1 root root    354908 2011-05-03 00:20 ./source/l/ConsoleKit/ConsoleKit-0.4.5.tar.xz
+-rwxr-xr-x   1 root root      5362 2012-07-08 01:23 ./source/l/ConsoleKit/ConsoleKit.SlackBuild
+-rw-r--r--   1 root root       602 2012-03-19 05:39 ./source/l/ConsoleKit/ck-history-don-t-truncate-frequent-output-to-8-chars.patch.gz
+-rw-r--r--   1 root root       854 2009-05-04 23:46 ./source/l/ConsoleKit/consolekit-0.2.10-cleanup_console_tags.patch.gz
+-rw-r--r--   1 root root      2210 2010-09-28 03:44 ./source/l/ConsoleKit/consolekit-0.4.2-revert.patch.gz
+-rw-r--r--   1 root root       353 2010-09-28 03:52 ./source/l/ConsoleKit/doinst.sh.gz
+-rw-r--r--   1 root root       411 2009-07-07 17:18 ./source/l/ConsoleKit/pam-foreground-compat.ck
+-rw-r--r--   1 root root       572 2010-12-02 19:03 ./source/l/ConsoleKit/rc.consolekit
+-rw-r--r--   1 root root       790 2010-05-04 00:17 ./source/l/ConsoleKit/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/GConf
+-rw-r--r--   1 root root   1525188 2012-03-11 01:07 ./source/l/GConf/GConf-3.2.5.tar.xz
+-rwxr-xr-x   1 root root      3991 2012-07-19 03:04 ./source/l/GConf/GConf.SlackBuild
+-rw-r--r--   1 root root       341 2011-11-06 21:59 ./source/l/GConf/doinst.sh.gz
+-rw-r--r--   1 root root       788 2012-07-18 18:51 ./source/l/GConf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 19:34 ./source/l/M2Crypto
+-rw-r--r--   1 root root    285200 2011-01-15 19:10 ./source/l/M2Crypto/M2Crypto-0.21.1.tar.xz
+-rwxr-xr-x   1 root root      2842 2012-07-04 01:23 ./source/l/M2Crypto/M2Crypto.SlackBuild
+-rw-r--r--   1 root root      1050 2009-03-31 01:47 ./source/l/M2Crypto/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-23 22:02 ./source/l/PyQt
+-rw-r--r--   1 root root   8394612 2012-04-01 10:38 ./source/l/PyQt/PyQt-x11-gpl-4.9.1.tar.xz
+-rwxr-xr-x   1 root root      3405 2012-06-26 17:33 ./source/l/PyQt/PyQt.SlackBuild
+-rw-r--r--   1 root root       254 2010-03-25 19:48 ./source/l/PyQt/PyQt.phonon.diff.gz
+-rw-r--r--   1 root root       731 2012-07-23 22:03 ./source/l/PyQt/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-17 22:31 ./source/l/QScintilla
+-rw-r--r--   1 root root   1075992 2012-04-01 10:39 ./source/l/QScintilla/QScintilla-gpl-2.6.1.tar.xz
+-rwxr-xr-x   1 root root      3548 2012-08-17 22:31 ./source/l/QScintilla/QScintilla.SlackBuild
+-rw-r--r--   1 root root      1127 2008-07-31 04:32 ./source/l/QScintilla/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/aalib
+-rw-r--r--   1 root root    391028 2001-04-26 15:56 ./source/l/aalib/aalib-1.4rc5.tar.gz
+-rwxr-xr-x   1 root root      3784 2011-01-23 07:26 ./source/l/aalib/aalib.SlackBuild
+-rw-r--r--   1 root root      1451 2002-03-28 07:45 ./source/l/aalib/slack-desc
+-rw-r--r--   1 root root      1305 2002-03-28 07:43 ./source/l/aalib/slack-desc.11line
+drwxr-xr-x   2 root root      4096 2012-04-01 10:42 ./source/l/akonadi
+-rw-r--r--   1 root root    210944 2012-04-01 10:42 ./source/l/akonadi/akonadi-1.7.2.tar.bz2
+-rwxr-xr-x   1 root root      3655 2012-04-08 18:25 ./source/l/akonadi/akonadi.SlackBuild
+-rw-r--r--   1 root root       110 2009-08-31 04:24 ./source/l/akonadi/doinst.sh.gz
+-rw-r--r--   1 root root       840 2012-04-08 20:46 ./source/l/akonadi/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-10 22:08 ./source/l/alsa-lib
+-rw-r--r--   1 root root    675580 2012-09-06 08:58 ./source/l/alsa-lib/alsa-lib-1.0.26.tar.xz
+-rwxr-xr-x   1 root root      3321 2012-09-10 22:09 ./source/l/alsa-lib/alsa-lib.SlackBuild
+-rw-r--r--   1 root root       861 2003-08-29 05:32 ./source/l/alsa-lib/slack-desc
+drwxr-xr-x   2 root root      4096 2012-02-07 23:43 ./source/l/alsa-oss
+-rw-r--r--   1 root root    197344 2012-01-25 09:44 ./source/l/alsa-oss/alsa-oss-1.0.25.tar.xz
+-rwxr-xr-x   1 root root      3026 2012-02-07 23:44 ./source/l/alsa-oss/alsa-oss.SlackBuild
+-rw-r--r--   1 root root       962 2003-08-29 06:30 ./source/l/alsa-oss/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-14 19:39 ./source/l/apr
+drwxr-xr-x   2 root root      4096 2012-02-06 22:16 ./source/l/apr-util
+-rw-r--r--   1 root root    635000 2011-12-13 22:18 ./source/l/apr-util/apr-util-1.4.1.tar.bz2
+-rw-r--r--   1 root root       243 2011-12-13 22:19 ./source/l/apr-util/apr-util-1.4.1.tar.bz2.asc
+-rwxr-xr-x   1 root root      3888 2012-07-04 00:15 ./source/l/apr-util/apr-util.SlackBuild
+-rw-r--r--   1 root root       114 2011-05-13 19:01 ./source/l/apr-util/apr-util.url
+-rw-r--r--   1 root root       942 2006-07-29 21:51 ./source/l/apr-util/slack-desc
+-rw-r--r--   1 root root    785724 2012-02-14 01:54 ./source/l/apr/apr-1.4.6.tar.bz2
+-rw-r--r--   1 root root       482 2012-02-14 01:54 ./source/l/apr/apr-1.4.6.tar.bz2.asc
+-rwxr-xr-x   1 root root      3363 2011-05-13 18:59 ./source/l/apr/apr.SlackBuild
+-rw-r--r--   1 root root       102 2012-05-14 19:38 ./source/l/apr/apr.url
+-rw-r--r--   1 root root       729 2006-07-29 07:49 ./source/l/apr/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-05 23:45 ./source/l/aspell
+drwxr-xr-x   2 root root      4096 2009-08-13 02:39 ./source/l/aspell-dict
+-rw-r--r--   1 root root    256111 2004-03-15 00:39 ./source/l/aspell-dict/aspell-af-0.50-0.tar.bz2
+-rw-r--r--   1 root root     68055 2003-04-17 02:03 ./source/l/aspell-dict/aspell-br-0.50-2.tar.bz2
+-rw-r--r--   1 root root    117652 2003-04-17 02:03 ./source/l/aspell-dict/aspell-cy-0.50-3.tar.bz2
+-rwxr-xr-x   1 root root      2446 2009-05-19 20:05 ./source/l/aspell-dict/aspell-dict.SlackBuild
+-rw-r--r--   1 root root    328225 2003-04-17 02:03 ./source/l/aspell-dict/aspell-el-0.50-3.tar.bz2
+-rw-r--r--   1 root root     89703 2003-04-17 02:03 ./source/l/aspell-dict/aspell-eo-0.50-2.tar.bz2
+-rw-r--r--   1 root root    157809 2003-04-17 02:03 ./source/l/aspell-dict/aspell-es-0.50-2.tar.bz2
+-rw-r--r--   1 root root    283086 2003-04-17 02:03 ./source/l/aspell-dict/aspell-fr-0.50-3.tar.bz2
+-rw-r--r--   1 root root    112313 2004-03-10 09:57 ./source/l/aspell-dict/aspell-gl-0.50-0.tar.bz2
+-rw-r--r--   1 root root     69462 2004-04-05 21:17 ./source/l/aspell-dict/aspell-gv-0.50-0.tar.bz2
+-rw-r--r--   1 root root    208118 2004-03-30 08:07 ./source/l/aspell-dict/aspell-hr-0.51-0.tar.bz2
+-rw-r--r--   1 root root     70883 2004-03-30 10:04 ./source/l/aspell-dict/aspell-ia-0.50-1.tar.bz2
+-rw-r--r--   1 root root    323850 2004-03-13 11:17 ./source/l/aspell-dict/aspell-is-0.51.1-0.tar.bz2
+-rw-r--r--   1 root root     57818 2004-03-15 00:40 ./source/l/aspell-dict/aspell-mi-0.50-0.tar.bz2
+-rw-r--r--   1 root root    122690 2004-04-23 18:46 ./source/l/aspell-dict/aspell-mk-0.50-0.tar.bz2
+-rw-r--r--   1 root root     50368 2004-03-15 00:40 ./source/l/aspell-dict/aspell-ms-0.50-0.tar.bz2
+-rw-r--r--   1 root root    124114 2004-03-25 00:02 ./source/l/aspell-dict/aspell-mt-0.50-0.tar.bz2
+-rw-r--r--   1 root root    423161 2009-07-21 19:10 ./source/l/aspell-dict/aspell-nb-0.50.1-0.tar.bz2
+-rw-r--r--   1 root root    428365 2003-04-17 02:03 ./source/l/aspell-dict/aspell-nl-0.50-2.tar.bz2
+-rw-r--r--   1 root root    335156 2004-04-05 07:11 ./source/l/aspell-dict/aspell-nn-0.50.1-1.tar.bz2
+-rw-r--r--   1 root root    286696 2003-04-17 02:03 ./source/l/aspell-dict/aspell-no-0.50-2.tar.bz2
+-rw-r--r--   1 root root    624458 2004-03-10 09:47 ./source/l/aspell-dict/aspell-pl-0.51-0.tar.bz2
+-rw-r--r--   1 root root    201341 2003-04-17 02:03 ./source/l/aspell-dict/aspell-pt-0.50-2.tar.bz2
+-rw-r--r--   1 root root     64110 2003-04-17 02:03 ./source/l/aspell-dict/aspell-ro-0.50-2.tar.bz2
+-rw-r--r--   1 root root     21821 2004-05-19 18:04 ./source/l/aspell-dict/aspell-rw-0.50-0.tar.bz2
+-rw-r--r--   1 root root    383840 2004-04-16 02:14 ./source/l/aspell-dict/aspell-sk-0.52-0.tar.bz2
+-rw-r--r--   1 root root    215463 2004-03-15 00:40 ./source/l/aspell-dict/aspell-sl-0.50-0.tar.bz2
+-rw-r--r--   1 root root     93942 2004-03-10 09:48 ./source/l/aspell-dict/aspell-sv-0.51-0.tar.bz2
+-rw-r--r--   1 root root    102172 2004-03-29 12:07 ./source/l/aspell-dict/aspell-sw-0.50-0.tar.bz2
+-rw-r--r--   1 root root     84846 2004-03-29 10:22 ./source/l/aspell-dict/aspell-tr-0.50-0.tar.bz2
+-rw-r--r--   1 root root    382513 2004-03-10 09:48 ./source/l/aspell-dict/aspell-uk-0.51-0.tar.bz2
+-rw-r--r--   1 root root     50363 2004-03-29 09:35 ./source/l/aspell-dict/aspell-wa-0.50-0.tar.bz2
+-rw-r--r--   1 root root    168226 2004-03-29 12:07 ./source/l/aspell-dict/aspell-zu-0.50-0.tar.bz2
+-rw-r--r--   1 root root    653405 2004-07-05 21:42 ./source/l/aspell-dict/aspell5-be-0.01.tar.bz2
+-rw-r--r--   1 root root    176676 2004-05-28 15:49 ./source/l/aspell-dict/aspell5-bg-4.0-0.tar.bz2
+-rw-r--r--   1 root root    317688 2004-08-13 02:35 ./source/l/aspell-dict/aspell5-da-1.4.42-1.tar.bz2
+-rw-r--r--   1 root root    165901 2004-08-13 02:36 ./source/l/aspell-dict/aspell5-fo-0.2.16-1.tar.bz2
+-rw-r--r--   1 root root    539910 2005-01-07 21:36 ./source/l/aspell-dict/aspell5-ga-3.6-0.tar.bz2
+-rw-r--r--   1 root root     51167 2004-08-13 02:37 ./source/l/aspell-dict/aspell5-gd-0.1.1-1.tar.bz2
+-rw-r--r--   1 root root     46288 2005-04-06 22:05 ./source/l/aspell-dict/aspell5-hil-0.11-0.tar.bz2
+-rw-r--r--   1 root root     76958 2004-08-12 15:04 ./source/l/aspell-dict/aspell5-id-1.2-0.tar.bz2
+-rw-r--r--   1 root root     23870 2004-09-22 17:27 ./source/l/aspell-dict/aspell5-ku-0.12-0.tar.bz2
+-rw-r--r--   1 root root     45331 2004-09-10 23:38 ./source/l/aspell-dict/aspell5-mg-0.03-0.tar.bz2
+-rw-r--r--   1 root root     22952 2004-08-10 14:49 ./source/l/aspell-dict/aspell5-ny-0.01-0.tar.bz2
+-rw-r--r--   1 root root    281538 2004-06-01 13:33 ./source/l/aspell-dict/aspell5-sc-1.0.tar.bz2
+-rw-r--r--   1 root root     33044 2004-06-02 14:11 ./source/l/aspell-dict/aspell5-tet-0.1.1.tar.bz2
+-rw-r--r--   1 root root     40642 2004-08-06 15:21 ./source/l/aspell-dict/aspell5-tl-0.02-1.tar.bz2
+-rw-r--r--   1 root root     22127 2004-08-13 02:38 ./source/l/aspell-dict/aspell5-tn-1.0.1-0.tar.bz2
+-rw-r--r--   1 root root     40493 2004-12-28 14:21 ./source/l/aspell-dict/aspell6-am-0.03-1.tar.bz2
+-rw-r--r--   1 root root     50588 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-az-0.02-0.tar.bz2
+-rw-r--r--   1 root root    117436 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-bn-0.01.1-1.tar.bz2
+-rw-r--r--   1 root root    222986 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-ca-20040130-1.tar.bz2
+-rw-r--r--   1 root root    451507 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-cs-20040614-1.tar.bz2
+-rw-r--r--   1 root root     32694 2005-03-11 20:40 ./source/l/aspell-dict/aspell6-csb-0.02-0.tar.bz2
+-rw-r--r--   1 root root    274407 2004-11-04 02:48 ./source/l/aspell-dict/aspell6-de-20030222-1.tar.bz2
+-rw-r--r--   1 root root    182442 2004-08-27 06:37 ./source/l/aspell-dict/aspell6-en-6.0-0.tar.bz2
+-rw-r--r--   1 root root    338155 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-et-0.1.21-1.tar.bz2
+-rw-r--r--   1 root root     97168 2004-11-04 02:01 ./source/l/aspell-dict/aspell6-fa-0.02-0.tar.bz2
+-rw-r--r--   1 root root    209249 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-fi-0.7-0.tar.bz2
+-rw-r--r--   1 root root     30949 2006-01-17 06:49 ./source/l/aspell-dict/aspell6-gu-0.02-0.tar.bz2
+-rw-r--r--   1 root root    122781 2006-05-21 23:39 ./source/l/aspell-dict/aspell6-he-1.0-0.tar.bz2
+-rw-r--r--   1 root root     51021 2005-01-27 13:35 ./source/l/aspell-dict/aspell6-hi-0.01-0.tar.bz2
+-rw-r--r--   1 root root    109026 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-hsb-0.01-1.tar.bz2
+-rw-r--r--   1 root root    375949 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-hu-0.99.4.2-0.tar.bz2
+-rw-r--r--   1 root root    216189 2005-06-01 06:35 ./source/l/aspell-dict/aspell6-it-2.2_20050523-0.tar.bz2
+-rw-r--r--   1 root root     42722 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-la-20020503-0.tar.bz2
+-rw-r--r--   1 root root    153912 2006-01-18 00:22 ./source/l/aspell-dict/aspell6-lt-1.1+cvs20060103-0.tar.bz2
+-rw-r--r--   1 root root     72416 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-lv-0.5.5-1.tar.bz2
+-rw-r--r--   1 root root     35446 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-mn-0.01-0.tar.bz2
+-rw-r--r--   1 root root    151720 2005-05-25 15:58 ./source/l/aspell-dict/aspell6-mr-0.10-0.tar.bz2
+-rw-r--r--   1 root root     32658 2004-12-28 02:31 ./source/l/aspell-dict/aspell6-nds-0.01-0.tar.bz2
+-rw-r--r--   1 root root     20525 2005-01-25 14:21 ./source/l/aspell-dict/aspell6-or-0.03-1.tar.bz2
+-rw-r--r--   1 root root     22143 2005-01-25 14:21 ./source/l/aspell-dict/aspell6-pa-0.01-1.tar.bz2
+-rw-r--r--   1 root root    864887 2008-07-18 05:44 ./source/l/aspell-dict/aspell6-pt_BR-20080707-0.tar.bz2
+-rw-r--r--   1 root root     85541 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-qu-0.02-0.tar.bz2
+-rw-r--r--   1 root root    427312 2004-08-27 06:37 ./source/l/aspell-dict/aspell6-ru-0.99f7-1.tar.bz2
+-rw-r--r--   1 root root    574923 2005-11-11 02:14 ./source/l/aspell-dict/aspell6-sr-0.02.tar.bz2
+-rw-r--r--   1 root root     44452 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-ta-20040424-1.tar.bz2
+-rw-r--r--   1 root root    310738 2005-09-29 06:21 ./source/l/aspell-dict/aspell6-te-0.01-2.tar.bz2
+-rw-r--r--   1 root root    179098 2005-11-06 20:39 ./source/l/aspell-dict/aspell6-uk-1.1-0.tar.bz2
+-rw-r--r--   1 root root     71160 2006-01-15 23:09 ./source/l/aspell-dict/aspell6-uz-0.5-0.tar.bz2
+-rw-r--r--   1 root root     30843 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-vi-0.01.1-1.tar.bz2
+-rw-r--r--   1 root root     74382 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-yi-0.01.1-1.tar.bz2
+-rw-r--r--   1 root root    864576 2008-04-16 06:31 ./source/l/aspell/aspell-0.60.6.tar.xz
+-rwxr-xr-x   1 root root      3359 2010-08-05 23:46 ./source/l/aspell/aspell.SlackBuild
+-rw-r--r--   1 root root       708 2003-01-13 23:01 ./source/l/aspell/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/atk
+-rw-r--r--   1 root root    607156 2012-03-26 18:53 ./source/l/atk/atk-2.4.0.tar.xz
+-rwxr-xr-x   1 root root      3525 2012-06-25 22:55 ./source/l/atk/atk.SlackBuild
+-rw-r--r--   1 root root       627 2008-02-11 03:44 ./source/l/atk/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-20 23:35 ./source/l/attica
+-rw-r--r--   1 root root     55598 2012-05-23 20:08 ./source/l/attica/attica-0.4.0.tar.bz2
+-rwxr-xr-x   1 root root      3281 2012-04-08 18:25 ./source/l/attica/attica.SlackBuild
+-rw-r--r--   1 root root       831 2012-04-08 20:46 ./source/l/attica/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-05 23:49 ./source/l/audiofile
+-rw-r--r--   1 root root    301344 2010-03-22 06:12 ./source/l/audiofile/audiofile-0.2.7.tar.xz
+-rwxr-xr-x   1 root root      3984 2010-08-05 23:50 ./source/l/audiofile/audiofile.SlackBuild
+-rw-r--r--   1 root root       775 2002-02-09 00:27 ./source/l/audiofile/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/automoc4
+-rw-r--r--   1 root root      9153 2009-01-22 18:51 ./source/l/automoc4/automoc4-0.9.88.tar.bz2
+-rwxr-xr-x   1 root root      2859 2010-08-05 23:53 ./source/l/automoc4/automoc4.SlackBuild
+-rw-r--r--   1 root root       912 2009-01-03 21:13 ./source/l/automoc4/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-06 18:17 ./source/l/babl
+-rw-r--r--   1 root root    363752 2012-05-03 14:02 ./source/l/babl/babl-0.1.10.tar.xz
+-rwxr-xr-x   1 root root      3341 2012-07-06 18:16 ./source/l/babl/babl.SlackBuild
+-rw-r--r--   1 root root       975 2008-10-02 04:36 ./source/l/babl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-28 21:07 ./source/l/boost
+-rwxr-xr-x   1 root root      4827 2012-07-28 21:05 ./source/l/boost/boost.SlackBuild
+-rw-r--r--   1 root root  42348092 2012-07-28 21:07 ./source/l/boost/boost_1_49_0.tar.xz
+-rw-r--r--   1 root root       889 2008-08-01 01:35 ./source/l/boost/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-08 18:10 ./source/l/cairo
+-rw-r--r--   1 root root       354 2010-10-17 01:03 ./source/l/cairo/cairo-1.10.0-buggy_gradients.patch.gz
+-rw-r--r--   1 root root  19646268 2010-12-25 23:03 ./source/l/cairo/cairo-1.10.2.tar.xz
+-rwxr-xr-x   1 root root      3652 2011-03-19 19:04 ./source/l/cairo/cairo.SlackBuild
+-rw-r--r--   1 root root       851 2006-01-18 02:12 ./source/l/cairo/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-05 23:55 ./source/l/chmlib
+-rw-r--r--   1 root root    252036 2009-05-23 15:56 ./source/l/chmlib/chmlib-0.40.tar.bz2
+-rwxr-xr-x   1 root root      3064 2011-03-29 04:29 ./source/l/chmlib/chmlib.SlackBuild
+-rw-r--r--   1 root root       164 2008-01-08 04:13 ./source/l/chmlib/chmlib.info
+-rw-r--r--   1 root root       927 2012-07-22 16:59 ./source/l/chmlib/slack-desc
+drwxr-xr-x   2 root root      4096 2012-02-01 13:19 ./source/l/clucene
+-rw-r--r--   1 root root   1689968 2011-08-29 22:26 ./source/l/clucene/clucene-src-2.3.3.4.tar.xz
+-rwxr-xr-x   1 root root      3624 2012-04-08 18:17 ./source/l/clucene/clucene.SlackBuild
+-rw-r--r--   1 root root       985 2012-02-01 13:19 ./source/l/clucene/clucene.pkgconfig.patch
+-rw-r--r--   1 root root       735 2012-04-08 20:46 ./source/l/clucene/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/db42
+-rw-r--r--   1 root root   3045196 2003-12-04 17:46 ./source/l/db42/db-4.2.52.tar.bz2
+-rwxr-xr-x   1 root root      4771 2010-08-05 23:59 ./source/l/db42/db42.SlackBuild
+-rw-r--r--   1 root root       544 2003-12-19 03:16 ./source/l/db42/patch.4.2.52.1.gz
+-rw-r--r--   1 root root       466 2004-02-02 20:19 ./source/l/db42/patch.4.2.52.2.gz
+-rw-r--r--   1 root root      1683 2005-12-09 11:17 ./source/l/db42/patch.4.2.52.3.gz
+-rw-r--r--   1 root root       427 2005-12-09 11:17 ./source/l/db42/patch.4.2.52.4.gz
+-rw-r--r--   1 root root       819 2006-03-04 22:50 ./source/l/db42/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/db44
+-rw-r--r--   1 root root   6886251 2006-01-10 16:38 ./source/l/db44/db-4.4.20.tar.bz2
+-rwxr-xr-x   1 root root      4526 2012-08-11 18:30 ./source/l/db44/db44.SlackBuild
+-rw-r--r--   1 root root       515 2006-02-03 06:33 ./source/l/db44/patch.4.4.20.1.gz
+-rw-r--r--   1 root root       392 2006-02-03 06:33 ./source/l/db44/patch.4.4.20.2.gz
+-rw-r--r--   1 root root       818 2006-03-08 22:05 ./source/l/db44/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-13 17:25 ./source/l/db48
+-rw-r--r--   1 root root   2384520 2012-08-11 17:09 ./source/l/db48/db-4.8.30.tar.xz
+-rwxr-xr-x   1 root root      4310 2012-08-23 04:06 ./source/l/db48/db48.SlackBuild
+-rw-r--r--   1 root root       818 2012-07-11 03:27 ./source/l/db48/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/dbus-glib
+-rw-r--r--   1 root root    477584 2011-09-30 15:16 ./source/l/dbus-glib/dbus-glib-0.98.tar.xz
+-rwxr-xr-x   1 root root      3818 2012-06-25 22:55 ./source/l/dbus-glib/dbus-glib.SlackBuild
+-rw-r--r--   1 root root       681 2007-03-16 03:46 ./source/l/dbus-glib/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/dbus-python
+-rw-r--r--   1 root root    403020 2012-05-09 14:48 ./source/l/dbus-python/dbus-python-1.1.0.tar.xz
+-rwxr-xr-x   1 root root      3482 2012-06-25 23:30 ./source/l/dbus-python/dbus-python.SlackBuild
+-rw-r--r--   1 root root       702 2008-04-04 16:21 ./source/l/dbus-python/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/desktop-file-utils
+-rw-r--r--   1 root root    124388 2012-03-05 12:09 ./source/l/desktop-file-utils/desktop-file-utils-0.20.tar.xz
+-rwxr-xr-x   1 root root      4151 2012-06-25 22:55 ./source/l/desktop-file-utils/desktop-file-utils.SlackBuild
+-rw-r--r--   1 root root       354 2010-05-11 14:01 ./source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff.gz
+-rw-r--r--   1 root root       128 2008-10-07 22:57 ./source/l/desktop-file-utils/doinst.sh.gz
+-rw-r--r--   1 root root      1124 2006-09-17 22:26 ./source/l/desktop-file-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-21 01:48 ./source/l/djvulibre
+-rw-r--r--   1 root root   2143792 2012-05-08 02:56 ./source/l/djvulibre/djvulibre-3.5.25.3.tar.xz
+-rwxr-xr-x   1 root root      4318 2012-06-25 05:09 ./source/l/djvulibre/djvulibre.SlackBuild
+-rw-r--r--   1 root root       257 2009-11-28 04:37 ./source/l/djvulibre/djvulibre.info
+-rw-r--r--   1 root root       140 2009-11-28 04:37 ./source/l/djvulibre/doinst.sh.gz
+-rw-r--r--   1 root root      1019 2008-08-01 02:56 ./source/l/djvulibre/slack-desc
+drwxr-xr-x   2 root root      4096 2011-09-14 21:49 ./source/l/ebook-tools
+-rw-r--r--   1 root root     39178 2010-12-08 15:29 ./source/l/ebook-tools/ebook-tools-0.2.1.tar.bz2
+-rwxr-xr-x   1 root root      3692 2012-04-08 18:17 ./source/l/ebook-tools/ebook-tools.SlackBuild
+-rw-r--r--   1 root root       653 2010-12-09 13:13 ./source/l/ebook-tools/ebook-tools.paths.diff
+-rw-r--r--   1 root root       781 2012-04-08 20:46 ./source/l/ebook-tools/slack-desc
+drwxr-xr-x   2 root root      4096 2009-11-28 04:16 ./source/l/eigen2
+-rw-r--r--   1 root root    327460 2009-11-25 13:46 ./source/l/eigen2/eigen2-2.0.10.tar.xz
+-rwxr-xr-x   1 root root      2874 2009-12-17 02:23 ./source/l/eigen2/eigen2.SlackBuild
+-rw-r--r--   1 root root       712 2008-11-23 23:23 ./source/l/eigen2/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-05 17:48 ./source/l/enchant
+-rw-r--r--   1 root root    359608 2009-12-05 17:48 ./source/l/enchant/enchant-1.5.0.tar.xz
+-rwxr-xr-x   1 root root      3293 2009-12-17 03:01 ./source/l/enchant/enchant.SlackBuild
+-rw-r--r--   1 root root       113 2009-12-05 17:48 ./source/l/enchant/enchant.info
+-rw-r--r--   1 root root       802 2008-08-01 04:51 ./source/l/enchant/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/esound
+-rw-r--r--   1 root root       262 2009-03-23 15:57 ./source/l/esound/doinst.sh.gz
+-rw-r--r--   1 root root    396474 2009-03-23 15:10 ./source/l/esound/esound-0.2.41.tar.bz2
+-rwxr-xr-x   1 root root      3634 2010-08-06 00:02 ./source/l/esound/esound.SlackBuild
+-rw-r--r--   1 root root       962 2002-04-02 06:54 ./source/l/esound/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-26 22:49 ./source/l/exiv2
+-rw-r--r--   1 root root   1640892 2012-04-23 15:03 ./source/l/exiv2/exiv2-0.23.tar.xz
+-rwxr-xr-x   1 root root      3605 2012-07-26 22:50 ./source/l/exiv2/exiv2.SlackBuild
+-rw-r--r--   1 root root       714 2008-08-01 04:53 ./source/l/exiv2/slack-desc
+drwxr-xr-x   2 root root      4096 2011-02-09 22:05 ./source/l/expat
+-rw-r--r--   1 root root       824 2010-12-09 21:51 ./source/l/expat/expat-2.0.1-fixes-3.patch.gz
+-rw-r--r--   1 root root    446456 2007-06-07 02:37 ./source/l/expat/expat-2.0.1.tar.gz
+-rwxr-xr-x   1 root root      2867 2011-02-09 22:06 ./source/l/expat/expat.SlackBuild
+-rw-r--r--   1 root root       720 2008-02-11 03:44 ./source/l/expat/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-17 01:38 ./source/l/fftw
+-rw-r--r--   1 root root   1937412 2009-07-14 10:31 ./source/l/fftw/fftw-3.2.2.tar.xz
+-rwxr-xr-x   1 root root      3591 2009-12-17 01:48 ./source/l/fftw/fftw.SlackBuild
+-rw-r--r--   1 root root       959 2012-07-22 17:01 ./source/l/fftw/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 03:42 ./source/l/freetype
+-rw-r--r--   1 root root   1322980 2012-06-19 03:43 ./source/l/freetype/freetype-2.4.10.tar.xz
+-rwxr-xr-x   1 root root      3927 2012-06-19 03:43 ./source/l/freetype/freetype.SlackBuild
+-rw-r--r--   1 root root       493 2004-06-05 20:44 ./source/l/freetype/freetype.illadvisederror.diff.gz
+-rw-r--r--   1 root root       295 2007-04-21 20:07 ./source/l/freetype/freetype.subpixel.rendering.diff.gz
+-rw-r--r--   1 root root       803 2006-07-22 01:26 ./source/l/freetype/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 04:18 ./source/l/fribidi
+-rw-r--r--   1 root root    411420 2009-03-26 22:39 ./source/l/fribidi/fribidi-0.19.2.tar.xz
+-rwxr-xr-x   1 root root      3407 2012-08-12 15:59 ./source/l/fribidi/fribidi.SlackBuild
+-rw-r--r--   1 root root       731 2012-07-18 04:16 ./source/l/fribidi/fribidi.glib.h.diff.gz
+-rw-r--r--   1 root root       811 2008-04-08 03:40 ./source/l/fribidi/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-30 22:27 ./source/l/fuse
+-rw-r--r--   1 root root       336 2007-12-07 22:12 ./source/l/fuse/doinst.sh.gz
+-rw-r--r--   1 root root    346680 2010-09-28 09:29 ./source/l/fuse/fuse-2.8.5.tar.xz
+-rwxr-xr-x   1 root root      4014 2011-01-30 22:28 ./source/l/fuse/fuse.SlackBuild
+-rw-r--r--   1 root root       846 2008-03-08 01:51 ./source/l/fuse/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-23 01:40 ./source/l/gamin
+-rw-r--r--   1 root root       272 2011-03-16 01:44 ./source/l/gamin/doinst.sh.gz
+-rw-r--r--   1 root root       366 2012-09-23 01:33 ./source/l/gamin/fix-double-lock-in-inotify-helper-c.patch.gz
+-rw-r--r--   1 root root    333504 2009-03-09 18:58 ./source/l/gamin/gamin-0.1.10.tar.xz
+-rwxr-xr-x   1 root root      3956 2012-09-23 18:02 ./source/l/gamin/gamin.SlackBuild
+-rw-r--r--   1 root root       497 2011-03-16 01:42 ./source/l/gamin/gaminrc.gz
+-rw-r--r--   1 root root       558 2012-09-23 01:40 ./source/l/gamin/no_g_const_return.patch.gz
+-rw-r--r--   1 root root       753 2007-03-16 02:26 ./source/l/gamin/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/gcr
+-rw-r--r--   1 root root       226 2012-07-18 20:49 ./source/l/gcr/doinst.sh.gz
+-rw-r--r--   1 root root   1335160 2012-04-16 12:09 ./source/l/gcr/gcr-3.4.1.tar.xz
+-rwxr-xr-x   1 root root      3446 2012-07-18 21:18 ./source/l/gcr/gcr.SlackBuild
+-rw-r--r--   1 root root       827 2012-04-12 03:17 ./source/l/gcr/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-12 07:44 ./source/l/gd
+-rw-r--r--   1 root root   1212730 2007-06-21 19:48 ./source/l/gd/gd-2.0.35.tar.bz2
+-rwxr-xr-x   1 root root      3770 2010-02-12 07:38 ./source/l/gd/gd.SlackBuild
+-rw-r--r--   1 root root      1088 2010-02-12 07:44 ./source/l/gd/gd.png14.diff.gz
+-rw-r--r--   1 root root       366 2010-02-18 03:20 ./source/l/gd/gdlib.pc
+-rw-r--r--   1 root root       922 2006-08-16 06:37 ./source/l/gd/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/gdbm
+-rw-r--r--   1 root root    228695 2002-10-16 18:01 ./source/l/gdbm/gdbm-1.8.3.tar.gz
+-rwxr-xr-x   1 root root      3614 2010-08-06 00:11 ./source/l/gdbm/gdbm.SlackBuild
+-rw-r--r--   1 root root       641 2002-03-23 23:12 ./source/l/gdbm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-10 19:00 ./source/l/gdk-pixbuf2
+-rw-r--r--   1 root root        91 2010-11-16 21:31 ./source/l/gdk-pixbuf2/doinst.sh.gz
+-rw-r--r--   1 root root   1167608 2012-04-14 20:37 ./source/l/gdk-pixbuf2/gdk-pixbuf-2.26.1.tar.xz
+-rw-r--r--   1 root root       242 2010-10-09 15:25 ./source/l/gdk-pixbuf2/gdk-pixbuf.pnglz.diff.gz
+-rwxr-xr-x   1 root root      4773 2012-09-10 19:00 ./source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild
+-rw-r--r--   1 root root      1000 2010-11-14 18:49 ./source/l/gdk-pixbuf2/slack-desc
+-rw-r--r--   1 root root      1848 2012-09-10 18:59 ./source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/gegl
+-rw-r--r--   1 root root   7078700 2012-05-03 14:01 ./source/l/gegl/gegl-0.2.0.tar.xz
+-rwxr-xr-x   1 root root      3413 2012-07-06 18:27 ./source/l/gegl/gegl.SlackBuild
+-rw-r--r--   1 root root       863 2012-07-22 17:01 ./source/l/gegl/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-06 22:20 ./source/l/giflib
+-rw-r--r--   1 root root    403232 2009-07-01 15:42 ./source/l/giflib/giflib-4.1.6.tar.xz
+-rwxr-xr-x   1 root root      3450 2010-02-06 22:19 ./source/l/giflib/giflib.SlackBuild
+-rw-r--r--   1 root root       776 2009-07-01 15:44 ./source/l/giflib/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/glade3
+-rw-r--r--   1 root root   2318896 2011-10-11 01:09 ./source/l/glade3/glade3-3.8.1.tar.xz
+-rwxr-xr-x   1 root root      3315 2012-07-18 21:52 ./source/l/glade3/glade3.SlackBuild
+-rw-r--r--   1 root root       903 2012-07-18 21:55 ./source/l/glade3/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/glib
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/l/glib-networking
+-rw-r--r--   1 root root       119 2011-11-06 21:59 ./source/l/glib-networking/doinst.sh.gz
+-rw-r--r--   1 root root    331996 2012-05-15 15:48 ./source/l/glib-networking/glib-networking-2.32.3.tar.xz
+-rwxr-xr-x   1 root root      3724 2012-07-19 03:05 ./source/l/glib-networking/glib-networking.SlackBuild
+-rw-r--r--   1 root root       798 2011-08-22 13:37 ./source/l/glib-networking/slack-desc
+-rw-r--r--   1 root root    346080 2001-03-15 14:59 ./source/l/glib/glib-1.2.10.tar.bz2
+-rwxr-xr-x   1 root root      3807 2010-08-06 00:12 ./source/l/glib/glib.SlackBuild
+-rw-r--r--   1 root root    110117 2006-12-01 09:17 ./source/l/glib/glib1.2_1.2.10-17.diff.bz2
+-rw-r--r--   1 root root       757 2007-03-08 16:59 ./source/l/glib/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 14:50 ./source/l/glib2
+-rw-r--r--   1 root root       516 2011-11-06 22:03 ./source/l/glib2/doinst.sh.gz
+-rw-r--r--   1 root root   6178556 2012-07-15 01:27 ./source/l/glib2/glib-2.32.4.tar.xz
+-rwxr-xr-x   1 root root      4012 2012-06-25 22:55 ./source/l/glib2/glib2.SlackBuild
+-rw-r--r--   1 root root       999 2011-03-27 21:04 ./source/l/glib2/libglib2.csh
+-rw-r--r--   1 root root       982 2008-03-18 07:08 ./source/l/glib2/libglib2.sh
+-rw-r--r--   1 root root       691 2003-01-11 05:50 ./source/l/glib2/slack-desc
+drwxr-xr-x   4 root root      4096 2012-09-17 19:58 ./source/l/glibc
+-rw-r--r--   1 root root      7252 2012-03-25 21:24 ./source/l/glibc/doinst.sh-glibc
+-rw-r--r--   1 root root      4512 2012-03-25 21:25 ./source/l/glibc/doinst.sh-glibc-solibs
+-rw-r--r--   1 root root       736 2010-10-12 19:33 ./source/l/glibc/doinst.sh-glibc-zoneinfo
+-rw-r--r--   1 root root       652 2009-01-09 04:49 ./source/l/glibc/glibc-2.10-dns-no-gethostbyname4.diff.gz
+-rw-r--r--   1 root root       541 2012-01-04 02:57 ./source/l/glibc/glibc-2.14-reexport-rpc-interface.patch.gz
+-rw-r--r--   1 root root       545 2012-01-04 02:58 ./source/l/glibc/glibc-2.14-reinstall-nis-rpc-headers.patch.gz
+-rw-r--r--   1 root root      2097 2011-11-12 08:02 ./source/l/glibc/glibc-2.14.1-fixes-1.patch.gz
+-rw-r--r--   1 root root      1520 2012-06-24 19:03 ./source/l/glibc/glibc-2.15-revert-c5a0802a.diff.gz
+-rw-r--r--   1 root root       714 2012-05-25 18:52 ./source/l/glibc/glibc-2.15.nscd-race-fix.diff.gz
+-rw-r--r--   1 root root  10280176 2012-03-21 17:48 ./source/l/glibc/glibc-2.15.tar.xz
+-rw-r--r--   1 root root       490 2012-03-21 17:48 ./source/l/glibc/glibc-2.15.tar.xz.sig
+-rwxr-xr-x   1 root root       174 2004-08-09 06:21 ./source/l/glibc/glibc-cvs-checkout.sh
+-rwxr-xr-x   1 root root     17495 2012-09-17 19:59 ./source/l/glibc/glibc.SlackBuild
+-rw-r--r--   1 root root       333 2011-02-09 01:36 ./source/l/glibc/glibc.disable.broken.optimized.memcpy.diff.gz
+-rw-r--r--   1 root root       183 2006-10-11 03:11 ./source/l/glibc/glibc.getcwd.max.macro.diff.gz
+-rw-r--r--   1 root root     11654 2011-01-06 17:20 ./source/l/glibc/glibc.git-4a531bb0b3b582cb693de9f76d2d97d970f9a5d5.patch.gz
+-rw-r--r--   1 root root      3510 2012-03-27 22:28 ./source/l/glibc/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff.gz
+-rw-r--r--   1 root root       558 2011-01-06 02:45 ./source/l/glibc/glibc.git-96611391ad8823ba58405325d78cefeae5cdf699-CVE-2010-3847b.patch.gz
+-rw-r--r--   1 root root       722 2011-03-24 07:29 ./source/l/glibc/glibc.ldd.trace.through.dynamic.linker.diff.gz
+-rw-r--r--   1 root root       304 2004-08-04 00:21 ./source/l/glibc/glibc.locale.no-archive.diff.gz
+-rw-r--r--   1 root root       558 2010-10-19 07:02 ./source/l/glibc/glibc.make-3.82.diff.gz
+-rw-r--r--   1 root root       325 2006-10-11 01:49 ./source/l/glibc/glibc.nis-netgroups.diff.gz
+-rw-r--r--   1 root root       246 2009-02-24 23:39 ./source/l/glibc/glibc.revert.to.fix.build.breakages.diff.gz
+-rw-r--r--   1 root root       213 2006-08-22 06:33 ./source/l/glibc/glibc.ru_RU.CP1251.diff.gz
+-rw-r--r--   1 root root      4441 2012-08-29 20:03 ./source/l/glibc/glibc.strtod.CVE-2012-3480.diff.gz
+-rw-r--r--   1 root root       254 2007-10-31 01:17 ./source/l/glibc/is_IS.diff.gz
+drwxr-xr-x   2 root root      4096 2006-09-14 06:32 ./source/l/glibc/profile.d
+-rwxr-xr-x   1 root root       328 2011-03-27 21:19 ./source/l/glibc/profile.d/glibc.csh.new
+-rwxr-xr-x   1 root root       325 2006-09-14 08:26 ./source/l/glibc/profile.d/glibc.sh.new
+-rw-r--r--   1 root root       845 2002-10-11 19:15 ./source/l/glibc/slack-desc.glibc
+-rw-r--r--   1 root root      1139 2002-10-12 04:15 ./source/l/glibc/slack-desc.glibc-debug
+-rw-r--r--   1 root root       794 2002-05-01 00:01 ./source/l/glibc/slack-desc.glibc-i18n
+-rw-r--r--   1 root root       972 2005-11-18 17:02 ./source/l/glibc/slack-desc.glibc-profile
+-rw-r--r--   1 root root       786 2002-03-23 23:26 ./source/l/glibc/slack-desc.glibc-solibs
+-rw-r--r--   1 root root      1227 2006-11-23 03:35 ./source/l/glibc/slack-desc.glibc-solibs-linuxthreads
+-rw-r--r--   1 root root       969 2011-11-11 18:09 ./source/l/glibc/slack-desc.glibc-zoneinfo
+-rw-r--r--   1 root root       965 2007-04-30 20:52 ./source/l/glibc/slack-desc.glibc-zoneinfo.olson
+drwxr-xr-x   3 root root      4096 2011-11-11 18:10 ./source/l/glibc/timezone-scripts
+-rw-r--r--   1 root root      2106 2006-12-04 00:32 ./source/l/glibc/timezone-scripts/output-updated-timeconfig.sh
+drwxr-xr-x   2 root root      4096 2006-12-03 23:10 ./source/l/glibc/timezone-scripts/parts
+-rw-r--r--   1 root root      4398 2008-03-10 11:39 ./source/l/glibc/timezone-scripts/parts/00
+-rw-r--r--   1 root root     44857 2007-09-18 00:33 ./source/l/glibc/timezone-scripts/parts/01
+-rw-r--r--   1 root root       443 2006-12-03 22:53 ./source/l/glibc/timezone-scripts/parts/02
+-rw-r--r--   1 root root     31601 2007-09-18 00:34 ./source/l/glibc/timezone-scripts/parts/03
+-rw-r--r--   1 root root       857 2006-12-03 22:54 ./source/l/glibc/timezone-scripts/parts/04
+-rw-r--r--   1 root root        87 2006-12-03 23:10 ./source/l/glibc/timezone-scripts/parts/README
+-rw-r--r--   1 root root        66 2003-02-16 21:17 ./source/l/glibc/timezone-scripts/setup.timeconfig
+-rw-r--r--   1 root root     86560 2011-11-11 17:11 ./source/l/glibc/timezone-scripts/timeconfig
+-rw-r--r--   1 root root    135543 2012-09-13 07:01 ./source/l/glibc/tzcode2012f.tar.gz
+-rw-r--r--   1 root root    206404 2012-09-13 06:32 ./source/l/glibc/tzdata2012f.tar.gz
+drwxr-xr-x   2 root root      4096 2010-02-03 23:41 ./source/l/gmime
+-rw-r--r--   1 root root    719516 2010-02-02 15:00 ./source/l/gmime/gmime-2.4.15.tar.xz
+-rwxr-xr-x   1 root root      3655 2010-02-04 00:12 ./source/l/gmime/gmime.SlackBuild
+-rw-r--r--   1 root root       753 2007-03-14 03:39 ./source/l/gmime/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/gmm
+-rw-r--r--   1 root root    333173 2008-09-09 18:47 ./source/l/gmm/gmm-3.1.tar.bz2
+-rwxr-xr-x   1 root root      2111 2009-05-19 20:05 ./source/l/gmm/gmm.SlackBuild
+-rw-r--r--   1 root root       117 2008-07-25 02:47 ./source/l/gmm/gmm.info
+-rw-r--r--   1 root root      1035 2008-08-01 03:49 ./source/l/gmm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-27 00:08 ./source/l/gmp
+-rw-r--r--   1 root root   1671264 2012-05-06 11:30 ./source/l/gmp/gmp-5.0.5.tar.xz
+-rw-r--r--   1 root root        72 2012-05-06 11:30 ./source/l/gmp/gmp-5.0.5.tar.xz.sig
+-rwxr-xr-x   1 root root      3643 2012-05-27 00:09 ./source/l/gmp/gmp.SlackBuild
+-rw-r--r--   1 root root       766 2003-06-24 00:14 ./source/l/gmp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/gnome-icon-theme
+-rw-r--r--   1 root root       138 2009-07-14 19:52 ./source/l/gnome-icon-theme/doinst.sh.gz
+-rw-r--r--   1 root root  14732316 2012-03-28 15:23 ./source/l/gnome-icon-theme/gnome-icon-theme-3.4.0.tar.xz
+-rw-r--r--   1 root root   1664028 2012-03-27 19:57 ./source/l/gnome-icon-theme/gnome-icon-theme-extras-3.4.0.tar.xz
+-rw-r--r--   1 root root    181884 2012-03-27 05:28 ./source/l/gnome-icon-theme/gnome-icon-theme-symbolic-3.4.0.tar.xz
+-rwxr-xr-x   1 root root      3153 2012-07-07 05:24 ./source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild
+-rw-r--r--   1 root root       766 2008-02-11 03:44 ./source/l/gnome-icon-theme/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-09 15:57 ./source/l/gnome-keyring
+-rw-r--r--   1 root root        96 2012-07-08 02:21 ./source/l/gnome-keyring/doinst.sh.gz
+-rw-r--r--   1 root root   1107820 2012-04-16 12:34 ./source/l/gnome-keyring/gnome-keyring-3.4.1.tar.xz
+-rwxr-xr-x   1 root root      3786 2012-08-09 16:01 ./source/l/gnome-keyring/gnome-keyring.SlackBuild
+-rw-r--r--   1 root root      1339 2012-08-09 15:56 ./source/l/gnome-keyring/gpg-agent-Hook-up-the-TTL-cache-option.patch.gz
+-rw-r--r--   1 root root       685 2012-08-09 15:56 ./source/l/gnome-keyring/schema-Update-description-for-gpg-cache-method.patch.gz
+-rw-r--r--   1 root root       637 2012-08-09 15:56 ./source/l/gnome-keyring/secret-store-Mark-a-secret-item-as-used-when-acces.patch.gz
+-rw-r--r--   1 root root       919 2012-07-18 21:52 ./source/l/gnome-keyring/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/gobject-introspection
+-rw-r--r--   1 root root   1120996 2012-04-17 20:38 ./source/l/gobject-introspection/gobject-introspection-1.32.1.tar.xz
+-rwxr-xr-x   1 root root      4024 2012-07-05 20:58 ./source/l/gobject-introspection/gobject-introspection.SlackBuild
+-rw-r--r--   1 root root      1107 2012-07-05 20:59 ./source/l/gobject-introspection/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 12:29 ./source/l/grantlee
+-rw-r--r--   1 root root   1022964 2012-04-01 11:27 ./source/l/grantlee/grantlee-0.2.0.tar.xz
+-rwxr-xr-x   1 root root      3285 2012-04-08 18:25 ./source/l/grantlee/grantlee.SlackBuild
+-rw-r--r--   1 root root       900 2012-04-08 20:46 ./source/l/grantlee/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-29 20:22 ./source/l/gsettings-desktop-schemas
+-rw-r--r--   1 root root       101 2011-11-28 06:11 ./source/l/gsettings-desktop-schemas/doinst.sh.gz
+-rw-r--r--   1 root root    198476 2012-05-15 15:24 ./source/l/gsettings-desktop-schemas/gsettings-desktop-schemas-3.4.2.tar.xz
+-rwxr-xr-x   1 root root      3486 2012-07-29 20:26 ./source/l/gsettings-desktop-schemas/gsettings-desktop-schemas.SlackBuild
+-rw-r--r--   1 root root       978 2011-11-28 06:07 ./source/l/gsettings-desktop-schemas/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/gst-plugins-base
+-rw-r--r--   1 root root   2364108 2012-02-21 00:04 ./source/l/gst-plugins-base/gst-plugins-base-0.10.36.tar.xz
+-rwxr-xr-x   1 root root      3922 2012-08-14 16:06 ./source/l/gst-plugins-base/gst-plugins-base.SlackBuild
+-rw-r--r--   1 root root      1067 2008-08-01 03:34 ./source/l/gst-plugins-base/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/gst-plugins-good
+-rw-r--r--   1 root root   2738016 2012-02-21 00:54 ./source/l/gst-plugins-good/gst-plugins-good-0.10.31.tar.xz
+-rwxr-xr-x   1 root root      3939 2012-08-14 16:11 ./source/l/gst-plugins-good/gst-plugins-good.SlackBuild
+-rw-r--r--   1 root root       902 2009-11-03 21:04 ./source/l/gst-plugins-good/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 05:00 ./source/l/gstreamer
+-rw-r--r--   1 root root   3025876 2012-02-20 23:16 ./source/l/gstreamer/gstreamer-0.10.36.tar.xz
+-rwxr-xr-x   1 root root      4258 2012-06-25 22:55 ./source/l/gstreamer/gstreamer.SlackBuild
+-rw-r--r--   1 root root      1060 2008-08-01 03:31 ./source/l/gstreamer/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/gtk+
+-rw-r--r--   1 root root   2248773 2001-04-02 03:04 ./source/l/gtk+/gtk+-1.2.10.tar.bz2
+-rwxr-xr-x   1 root root      3984 2011-01-23 07:31 ./source/l/gtk+/gtk+.SlackBuild
+-rw-r--r--   1 root root    159953 2005-10-06 11:17 ./source/l/gtk+/gtk+1.2_1.2.10-18.diff.bz2
+-rw-r--r--   1 root root       806 2007-03-08 17:07 ./source/l/gtk+/slack-desc
+drwxr-xr-x   3 root root      4096 2012-06-25 22:55 ./source/l/gtk+2
+-rw-r--r--   1 root root       505 2010-12-04 23:22 ./source/l/gtk+2/doinst.sh.gz
+-rw-r--r--   1 root root       359 2011-02-11 16:42 ./source/l/gtk+2/fix_build_issues_on_tutorial_and_faq.diff.gz
+-rw-r--r--   1 root root  13261132 2012-02-06 17:43 ./source/l/gtk+2/gtk+-2.24.10.tar.xz
+-rw-r--r--   1 root root      2047 2011-04-02 17:20 ./source/l/gtk+2/gtk+-2.24.x.icon-compat.am.diff.gz
+-rw-r--r--   1 root root      1923 2011-04-02 17:21 ./source/l/gtk+2/gtk+-2.24.x.icon-compat.diff.gz
+-rwxr-xr-x   1 root root      6482 2012-08-14 18:55 ./source/l/gtk+2/gtk+2.SlackBuild
+-rw-r--r--   1 root root       293 2010-02-08 20:43 ./source/l/gtk+2/gtk.xid.nowarningflood.diff.gz
+drwxr-xr-x   2 root root      4096 2003-01-11 06:27 ./source/l/gtk+2/profile.d
+-rwxr-xr-x   1 root root        32 2010-12-09 19:12 ./source/l/gtk+2/profile.d/gtk+.csh
+-rwxr-xr-x   1 root root        44 2010-12-09 19:13 ./source/l/gtk+2/profile.d/gtk+.sh
+-rw-r--r--   1 root root       791 2008-02-11 03:44 ./source/l/gtk+2/slack-desc
+-rw-r--r--   1 root root       339 2011-02-24 20:40 ./source/l/gtk+2/update-gtk-immodules
+-rw-r--r--   1 root root      2412 2009-08-11 18:04 ./source/l/gtk+2/update-gtk-immodules-2.0
+-rw-r--r--   1 root root       475 2011-02-11 14:54 ./source/l/gtk+2/use_host_triplet_for_gtk_immodules.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-18 14:52 ./source/l/gtk+3
+-rw-r--r--   1 root root       505 2011-09-18 05:17 ./source/l/gtk+3/doinst.sh.gz
+-rw-r--r--   1 root root  12854476 2012-07-15 20:04 ./source/l/gtk+3/gtk+-3.4.4.tar.xz
+-rwxr-xr-x   1 root root      6247 2012-07-12 17:07 ./source/l/gtk+3/gtk+3.SlackBuild
+-rw-r--r--   1 root root       791 2011-08-04 01:16 ./source/l/gtk+3/slack-desc
+-rw-r--r--   1 root root      2412 2011-08-04 01:16 ./source/l/gtk+3/update-gtk-immodules-3.0
+-rw-r--r--   1 root root       313 2011-08-04 01:48 ./source/l/gtk+3/use_host_triplet_for_gtk_immodules.diff.gz
+drwxr-xr-x   2 root root      4096 2010-08-06 00:15 ./source/l/gtkspell
+-rw-r--r--   1 root root    241976 2009-10-23 02:57 ./source/l/gtkspell/gtkspell-2.0.16.tar.xz
+-rwxr-xr-x   1 root root      3589 2010-08-06 00:16 ./source/l/gtkspell/gtkspell.SlackBuild
+-rw-r--r--   1 root root       789 2008-09-18 22:42 ./source/l/gtkspell/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-23 17:36 ./source/l/gvfs
+-rw-r--r--   1 root root       169 2012-07-23 17:36 ./source/l/gvfs/doinst.sh.gz
+-rw-r--r--   1 root root   1361968 2012-05-15 20:16 ./source/l/gvfs/gvfs-1.12.3.tar.xz
+-rwxr-xr-x   1 root root      4118 2012-07-24 21:56 ./source/l/gvfs/gvfs.SlackBuild
+-rw-r--r--   1 root root       886 2012-07-19 00:32 ./source/l/gvfs/slack-desc
+drwxr-xr-x   2 root root      4096 2011-09-14 21:49 ./source/l/herqq
+-rw-r--r--   1 root root   1070813 2011-07-29 11:28 ./source/l/herqq/herqq-1.0.0.zip
+-rwxr-xr-x   1 root root      3069 2012-04-08 18:25 ./source/l/herqq/herqq.SlackBuild
+-rw-r--r--   1 root root       834 2012-04-08 20:46 ./source/l/herqq/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 19:52 ./source/l/hicolor-icon-theme
+-rw-r--r--   1 root root       580 2012-07-18 19:52 ./source/l/hicolor-icon-theme/doinst.sh.gz
+-rw-r--r--   1 root root     38008 2010-01-13 10:20 ./source/l/hicolor-icon-theme/hicolor-icon-theme-0.12.tar.gz
+-rwxr-xr-x   1 root root      2277 2012-07-18 19:52 ./source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild
+-rw-r--r--   1 root root       638 2012-07-18 19:51 ./source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache
+-rw-r--r--   1 root root       914 2006-08-11 03:58 ./source/l/hicolor-icon-theme/slack-desc
+drwxr-xr-x   2 root root      4096 2012-01-15 23:28 ./source/l/hunspell
+-rw-r--r--   1 root root    611176 2012-01-15 23:26 ./source/l/hunspell/hunspell-1.3.2.tar.xz
+-rwxr-xr-x   1 root root      3864 2012-04-08 18:18 ./source/l/hunspell/hunspell.SlackBuild
+-rw-r--r--   1 root root       969 2012-04-08 20:46 ./source/l/hunspell/slack-desc
+drwxr-xr-x   2 root root      4096 2009-03-05 23:09 ./source/l/icon-naming-utils
+-rw-r--r--   1 root root     70352 2009-02-21 03:41 ./source/l/icon-naming-utils/icon-naming-utils-0.8.90.tar.gz
+-rwxr-xr-x   1 root root      2613 2010-08-06 00:18 ./source/l/icon-naming-utils/icon-naming-utils.SlackBuild
+-rw-r--r--   1 root root       219 2009-03-05 22:05 ./source/l/icon-naming-utils/icon-naming-utils.pkgconfigdir.diff.gz
+-rw-r--r--   1 root root       927 2012-07-22 17:02 ./source/l/icon-naming-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-02 03:42 ./source/l/icu4c
+-rw-r--r--   1 root root   9890024 2012-06-01 14:56 ./source/l/icu4c/icu4c-49_1_2-src.tar.xz
+-rwxr-xr-x   1 root root      3171 2012-08-02 03:43 ./source/l/icu4c/icu4c.SlackBuild
+-rw-r--r--   1 root root       755 2010-03-06 01:12 ./source/l/icu4c/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 19:12 ./source/l/ilmbase
+-rw-r--r--   1 root root    286616 2010-07-23 02:15 ./source/l/ilmbase/ilmbase-1.0.2.tar.xz
+-rwxr-xr-x   1 root root      3154 2010-08-09 19:12 ./source/l/ilmbase/ilmbase.SlackBuild
+-rw-r--r--   1 root root       171 2010-08-09 19:12 ./source/l/ilmbase/ilmbase.gcc4.diff.gz
+-rw-r--r--   1 root root       162 2008-04-29 21:14 ./source/l/ilmbase/ilmbase.info
+-rw-r--r--   1 root root       829 2012-07-22 17:03 ./source/l/ilmbase/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-11 21:10 ./source/l/imlib
+-rw-r--r--   1 root root    605220 2004-09-24 14:45 ./source/l/imlib/imlib-1.9.15.tar.xz
+-rwxr-xr-x   1 root root      3193 2010-06-24 00:19 ./source/l/imlib/imlib.SlackBuild
+-rw-r--r--   1 root root       799 2008-04-28 21:21 ./source/l/imlib/imlib.mitshm.render.diff.gz
+-rw-r--r--   1 root root       857 2008-02-11 03:44 ./source/l/imlib/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-07 17:15 ./source/l/iso-codes
+-rw-r--r--   1 root root   6218585 2011-03-01 09:42 ./source/l/iso-codes/iso-codes-3.24.2.tar.bz2
+-rw-r--r--   1 root root       543 2011-03-01 09:42 ./source/l/iso-codes/iso-codes-3.24.2.tar.bz2.sig
+-rwxr-xr-x   1 root root      2449 2011-03-07 17:16 ./source/l/iso-codes/iso-codes.SlackBuild
+-rw-r--r--   1 root root       212 2008-11-14 15:31 ./source/l/iso-codes/iso-codes.info
+-rw-r--r--   1 root root       471 2008-11-14 15:29 ./source/l/iso-codes/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/jasper
+-rw-r--r--   1 root root    958519 2009-04-03 00:58 ./source/l/jasper/jasper-1.900.1.tar.bz2
+-rwxr-xr-x   1 root root      3513 2010-02-11 20:18 ./source/l/jasper/jasper.SlackBuild
+-rw-r--r--   1 root root       847 2012-07-22 17:04 ./source/l/jasper/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/js185
+-rw-r--r--   1 root root   3540200 2011-03-31 20:03 ./source/l/js185/js185-1.0.0.tar.xz
+-rw-r--r--   1 root root       543 2012-01-21 14:32 ./source/l/js185/js185-destdir.patch
+-rwxr-xr-x   1 root root      3594 2012-07-18 22:16 ./source/l/js185/js185.SlackBuild
+-rw-r--r--   1 root root       805 2012-07-18 23:55 ./source/l/js185/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/l/keybinder
+-rw-r--r--   1 root root    247524 2012-06-17 16:30 ./source/l/keybinder/keybinder-0.3.0.tar.xz
+-rwxr-xr-x   1 root root      3387 2012-08-29 17:28 ./source/l/keybinder/keybinder.SlackBuild
+-rw-r--r--   1 root root       832 2011-11-28 02:25 ./source/l/keybinder/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-20 16:55 ./source/l/keyutils
+-rw-r--r--   1 root root     63397 2011-11-30 15:30 ./source/l/keyutils/keyutils-1.5.5.tar.bz2
+-rwxr-xr-x   1 root root      4058 2012-06-20 16:55 ./source/l/keyutils/keyutils.SlackBuild
+-rw-r--r--   1 root root       872 2012-06-20 16:51 ./source/l/keyutils/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-20 05:51 ./source/l/lcms
+-rw-r--r--   1 root root    608880 2009-10-30 15:57 ./source/l/lcms/lcms-1.19.tar.xz
+-rwxr-xr-x   1 root root      3261 2012-06-19 17:29 ./source/l/lcms/lcms.SlackBuild
+-rw-r--r--   1 root root       665 2004-02-22 08:32 ./source/l/lcms/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-11 10:07 ./source/l/lcms2
+-rw-r--r--   1 root root   3926516 2012-02-23 21:59 ./source/l/lcms2/lcms2-2.3.tar.xz
+-rwxr-xr-x   1 root root      3552 2012-04-08 18:18 ./source/l/lcms2/lcms2.SlackBuild
+-rw-r--r--   1 root root       689 2012-04-08 20:46 ./source/l/lcms2/slack-desc
+drwxr-xr-x   2 root root      4096 2010-04-19 20:00 ./source/l/lesstif
+-rw-r--r--   1 root root       210 2007-02-07 06:18 ./source/l/lesstif/doinst.sh.gz
+-rw-r--r--   1 root root   1821464 2009-05-27 14:10 ./source/l/lesstif/lesstif-0.95.2.tar.xz
+-rw-r--r--   1 root root       507 2008-10-21 20:43 ./source/l/lesstif/lesstif.Makefile.in.patch.gz
+-rw-r--r--   1 root root       737 2008-10-21 20:30 ./source/l/lesstif/lesstif.PutPixel32.patch.gz
+-rwxr-xr-x   1 root root      4824 2010-04-19 20:12 ./source/l/lesstif/lesstif.SlackBuild
+-rw-r--r--   1 root root       267 2009-03-23 21:35 ./source/l/lesstif/lesstif.rendertable.check.diff.gz
+-rw-r--r--   1 root root       588 2008-10-17 20:29 ./source/l/lesstif/lesstif.x86_64.patch.gz
+-rw-r--r--   1 root root       984 2002-03-23 23:35 ./source/l/lesstif/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-11 01:12 ./source/l/libaio
+-rw-r--r--   1 root root     43579 2009-10-09 21:15 ./source/l/libaio/libaio-0.3.109.tar.bz2
+-rw-r--r--   1 root root       248 2009-10-09 21:15 ./source/l/libaio/libaio-0.3.109.tar.sign
+-rwxr-xr-x   1 root root      3782 2010-05-11 01:13 ./source/l/libaio/libaio.SlackBuild
+-rw-r--r--   1 root root       962 2008-04-10 03:50 ./source/l/libaio/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-09 20:11 ./source/l/libao
+-rw-r--r--   1 root root    397102 2011-02-22 23:00 ./source/l/libao/libao-1.1.0.tar.gz
+-rwxr-xr-x   1 root root      2737 2011-03-09 20:12 ./source/l/libao/libao.SlackBuild
+-rw-r--r--   1 root root       884 2003-12-19 00:27 ./source/l/libao/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 00:55 ./source/l/libarchive
+-rw-r--r--   1 root root    952496 2012-02-05 01:33 ./source/l/libarchive/libarchive-2.8.5.tar.xz
+-rwxr-xr-x   1 root root      3245 2010-03-06 19:41 ./source/l/libarchive/libarchive.SlackBuild
+-rw-r--r--   1 root root       872 2009-03-07 18:02 ./source/l/libarchive/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-06 00:24 ./source/l/libart_lgpl
+-rw-r--r--   1 root root    278396 2010-04-01 15:43 ./source/l/libart_lgpl/libart_lgpl-2.3.21.tar.xz
+-rwxr-xr-x   1 root root      2898 2010-08-06 00:25 ./source/l/libart_lgpl/libart_lgpl.SlackBuild
+-rw-r--r--   1 root root       823 2007-05-04 21:13 ./source/l/libart_lgpl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-21 01:56 ./source/l/libatasmart
+-rw-r--r--   1 root root       104 2010-06-08 06:33 ./source/l/libatasmart/README
+-rw-r--r--   1 root root    251204 2012-05-20 22:15 ./source/l/libatasmart/libatasmart-0.19.tar.xz
+-rwxr-xr-x   1 root root      3479 2012-06-21 01:56 ./source/l/libatasmart/libatasmart.SlackBuild
+-rw-r--r--   1 root root        27 2010-11-10 05:16 ./source/l/libatasmart/libatasmart.info
+-rw-r--r--   1 root root      1017 2012-04-08 20:46 ./source/l/libatasmart/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-01 17:20 ./source/l/libbluedevil
+-rw-r--r--   1 root root    191321 2012-04-29 06:36 ./source/l/libbluedevil/libbluedevil-1.9.2.tar.bz2
+-rwxr-xr-x   1 root root      3392 2012-04-08 18:25 ./source/l/libbluedevil/libbluedevil.SlackBuild
+-rw-r--r--   1 root root       750 2012-07-22 17:04 ./source/l/libbluedevil/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-25 22:14 ./source/l/libcaca
+-rw-r--r--   1 root root    789612 2012-04-06 20:43 ./source/l/libcaca/libcaca-0.99.beta18.tar.xz
+-rwxr-xr-x   1 root root      3725 2012-06-19 18:42 ./source/l/libcaca/libcaca.SlackBuild
+-rw-r--r--   1 root root       817 2004-04-20 23:03 ./source/l/libcaca/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/l/libcanberra
+-rw-r--r--   1 root root    315728 2012-05-15 10:39 ./source/l/libcanberra/libcanberra-0.29.tar.xz
+-rwxr-xr-x   1 root root      3412 2012-07-19 00:56 ./source/l/libcanberra/libcanberra.SlackBuild
+-rw-r--r--   1 root root        49 2012-05-01 01:27 ./source/l/libcanberra/libcanberra.url
+-rw-r--r--   1 root root       941 2012-07-19 01:13 ./source/l/libcanberra/slack-desc
+drwxr-xr-x   2 root root      4096 2011-08-22 03:26 ./source/l/libcap
+-rw-r--r--   1 root root       553 2008-10-30 18:03 ./source/l/libcap/README.SLACKWARE
+-rw-r--r--   1 root root     11907 2008-03-29 00:07 ./source/l/libcap/capfaq-0.2.txt
+-rw-r--r--   1 root root     60051 2011-07-25 02:30 ./source/l/libcap/libcap-2.22.tar.bz2
+-rw-r--r--   1 root root       249 2011-07-25 02:30 ./source/l/libcap/libcap-2.22.tar.bz2.sign
+-rwxr-xr-x   1 root root      3761 2011-08-22 03:27 ./source/l/libcap/libcap.SlackBuild
+-rw-r--r--   1 root root       247 2011-02-08 20:24 ./source/l/libcap/libcap.capability.h.fix.broken.includes.diff.gz
+-rw-r--r--   1 root root       837 2008-10-30 18:03 ./source/l/libcap/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-06 21:38 ./source/l/libcddb
+-rw-r--r--   1 root root    295676 2009-04-06 22:58 ./source/l/libcddb/libcddb-1.3.2.tar.xz
+-rwxr-xr-x   1 root root      3871 2012-07-09 03:46 ./source/l/libcddb/libcddb.SlackBuild
+-rw-r--r--   1 root root       786 2008-03-10 09:31 ./source/l/libcddb/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/libcdio
+-rw-r--r--   1 root root   1091852 2012-05-26 03:12 ./source/l/libcdio/libcdio-0.83.tar.xz
+-rwxr-xr-x   1 root root      3774 2012-06-25 22:55 ./source/l/libcdio/libcdio.SlackBuild
+-rw-r--r--   1 root root        32 2012-05-26 03:12 ./source/l/libcdio/libcdio.url
+-rw-r--r--   1 root root      1012 2008-03-10 09:14 ./source/l/libcdio/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/libcroco
+-rw-r--r--   1 root root    462120 2012-03-26 13:20 ./source/l/libcroco/libcroco-0.6.5.tar.xz
+-rwxr-xr-x   1 root root      3093 2012-06-25 22:55 ./source/l/libcroco/libcroco.SlackBuild
+-rw-r--r--   1 root root        49 2012-05-03 16:28 ./source/l/libcroco/libcroco.url
+-rw-r--r--   1 root root       891 2012-07-06 18:31 ./source/l/libcroco/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 11:19 ./source/l/libdbusmenu-qt
+-rw-r--r--   1 root root     37882 2012-03-29 16:13 ./source/l/libdbusmenu-qt/libdbusmenu-qt-0.9.2.tar.bz2
+-rwxr-xr-x   1 root root      3500 2012-07-30 17:17 ./source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild
+-rw-r--r--   1 root root       923 2012-04-08 20:47 ./source/l/libdbusmenu-qt/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-04 00:31 ./source/l/libdiscid
+-rw-r--r--   1 root root    347907 2008-08-06 19:46 ./source/l/libdiscid/libdiscid-0.2.2.tar.gz
+-rwxr-xr-x   1 root root      3431 2010-04-30 21:49 ./source/l/libdiscid/libdiscid.SlackBuild
+-rw-r--r--   1 root root       940 2010-05-04 00:19 ./source/l/libdiscid/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-11 16:28 ./source/l/libdvdread
+-rw-r--r--   1 root root     97469 2011-10-08 22:08 ./source/l/libdvdread/libdvdread-4.2.0.tar.bz2
+-rwxr-xr-x   1 root root      3151 2012-06-11 16:28 ./source/l/libdvdread/libdvdread.SlackBuild
+-rw-r--r--   1 root root       858 2009-03-08 00:28 ./source/l/libdvdread/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-27 04:23 ./source/l/libelf
+-rw-r--r--   1 root root    112852 2010-10-18 17:32 ./source/l/libelf/libelf-0.8.13.tar.xz
+-rwxr-xr-x   1 root root      3954 2011-03-27 04:24 ./source/l/libelf/libelf.SlackBuild
+-rw-r--r--   1 root root       902 2010-10-18 17:59 ./source/l/libelf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 03:09 ./source/l/libexif
+-rw-r--r--   1 root root    899556 2012-07-12 20:35 ./source/l/libexif/libexif-0.6.21.tar.xz
+-rwxr-xr-x   1 root root      3334 2012-07-18 03:09 ./source/l/libexif/libexif.SlackBuild
+-rw-r--r--   1 root root       197 2011-02-09 07:02 ./source/l/libexif/libexif.pc.diff.gz
+-rw-r--r--   1 root root       855 2008-02-11 03:44 ./source/l/libexif/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-19 03:01 ./source/l/libffi
+-rw-r--r--   1 root root    546076 2012-04-12 03:17 ./source/l/libffi/libffi-3.0.11.tar.xz
+-rwxr-xr-x   1 root root      4047 2012-06-24 23:24 ./source/l/libffi/libffi.SlackBuild
+-rw-r--r--   1 root root       996 2011-10-09 02:10 ./source/l/libffi/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libglade
+-rw-r--r--   1 root root    356119 2009-03-23 15:10 ./source/l/libglade/libglade-2.6.4.tar.bz2
+-rwxr-xr-x   1 root root      3575 2010-04-25 20:44 ./source/l/libglade/libglade.SlackBuild
+-rw-r--r--   1 root root       808 2008-02-11 03:44 ./source/l/libglade/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/libgnome-keyring
+-rw-r--r--   1 root root    417752 2012-04-16 11:45 ./source/l/libgnome-keyring/libgnome-keyring-3.4.1.tar.xz
+-rwxr-xr-x   1 root root      3318 2012-07-18 21:16 ./source/l/libgnome-keyring/libgnome-keyring.SlackBuild
+-rw-r--r--   1 root root       879 2010-12-20 04:21 ./source/l/libgnome-keyring/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/libgphoto2
+-rw-r--r--   1 root root       470 2011-12-13 18:45 ./source/l/libgphoto2/fix-usb_id-callout-for-udev-175.diff.gz
+-rw-r--r--   1 root root   3273772 2012-05-19 21:26 ./source/l/libgphoto2/libgphoto2-2.4.14.tar.xz
+-rwxr-xr-x   1 root root      5861 2012-07-17 17:38 ./source/l/libgphoto2/libgphoto2.SlackBuild
+-rw-r--r--   1 root root       754 2012-07-22 17:05 ./source/l/libgphoto2/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-20 01:44 ./source/l/libgpod
+-rw-r--r--   1 root root       269 2011-01-16 17:25 ./source/l/libgpod/doinst.sh.gz
+-rw-r--r--   1 root root    654760 2011-07-24 12:14 ./source/l/libgpod/libgpod-0.8.2.tar.xz
+-rwxr-xr-x   1 root root      4318 2012-06-20 01:44 ./source/l/libgpod/libgpod.SlackBuild
+-rw-r--r--   1 root root       976 2006-09-06 23:53 ./source/l/libgpod/slack-desc
+drwxr-xr-x   2 root root      4096 2011-04-04 04:23 ./source/l/libgsf
+-rw-r--r--   1 root root    509172 2011-03-25 03:17 ./source/l/libgsf/libgsf-1.14.20.tar.xz
+-rwxr-xr-x   1 root root      3974 2012-06-19 18:49 ./source/l/libgsf/libgsf.SlackBuild
+-rw-r--r--   1 root root       793 2006-04-15 21:17 ./source/l/libgsf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-23 22:03 ./source/l/libical
+-rw-r--r--   1 root root       438 2008-11-02 11:50 ./source/l/libical/README
+-rw-r--r--   1 root root    652620 2011-12-13 17:08 ./source/l/libical/libical-0.48.tar.xz
+-rwxr-xr-x   1 root root      3538 2010-08-06 21:49 ./source/l/libical/libical.SlackBuild
+-rw-r--r--   1 root root       933 2012-07-23 22:04 ./source/l/libical/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libid3tag
+-rw-r--r--   1 root root       222 2009-03-23 21:58 ./source/l/libid3tag/id3tag.pc
+-rw-r--r--   1 root root    338143 2004-02-17 03:54 ./source/l/libid3tag/libid3tag-0.15.1b.tar.gz
+-rw-r--r--   1 root root       189 2004-02-18 03:17 ./source/l/libid3tag/libid3tag-0.15.1b.tar.gz.sign
+-rwxr-xr-x   1 root root      3890 2011-02-08 20:57 ./source/l/libid3tag/libid3tag.SlackBuild
+-rw-r--r--   1 root root       778 2003-09-10 01:00 ./source/l/libid3tag/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-07 02:48 ./source/l/libidl
+-rw-r--r--   1 root root    359144 2010-03-30 12:38 ./source/l/libidl/libIDL-0.8.14.tar.xz
+-rwxr-xr-x   1 root root      3306 2010-08-07 02:50 ./source/l/libidl/libidl.SlackBuild
+-rw-r--r--   1 root root       795 2008-02-11 03:44 ./source/l/libidl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-23 20:07 ./source/l/libidn
+-rw-r--r--   1 root root   2198880 2012-05-23 08:52 ./source/l/libidn/libidn-1.25.tar.xz
+-rwxr-xr-x   1 root root      3788 2012-06-19 17:31 ./source/l/libidn/libidn.SlackBuild
+-rw-r--r--   1 root root       793 2004-10-14 02:11 ./source/l/libidn/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libieee1284
+-rw-r--r--   1 root root    278804 2007-09-18 10:03 ./source/l/libieee1284/libieee1284-0.2.11.tar.bz2
+-rwxr-xr-x   1 root root      3896 2012-06-19 05:28 ./source/l/libieee1284/libieee1284.SlackBuild
+-rw-r--r--   1 root root       842 2008-02-11 03:44 ./source/l/libieee1284/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-04 00:44 ./source/l/libiodbc
+-rw-r--r--   1 root root    658548 2009-12-24 21:16 ./source/l/libiodbc/libiodbc-3.52.7.tar.xz
+-rwxr-xr-x   1 root root      3649 2010-05-04 00:44 ./source/l/libiodbc/libiodbc.SlackBuild
+-rw-r--r--   1 root root       896 2009-12-24 21:39 ./source/l/libiodbc/slack-desc
+drwxr-xr-x   2 root root      4096 2010-04-05 02:32 ./source/l/libjpeg
+-rw-r--r--   1 root root    648772 2010-02-28 10:24 ./source/l/libjpeg/jpegsrc.v8a.tar.xz
+-rwxr-xr-x   1 root root      3269 2012-07-16 02:05 ./source/l/libjpeg/libjpeg.SlackBuild
+-rw-r--r--   1 root root      1120 2002-03-23 23:37 ./source/l/libjpeg/slack-desc
+drwxr-xr-x   2 root root      4096 2009-06-07 20:28 ./source/l/libkarma
+-rw-r--r--   1 root root     81330 2009-06-06 18:10 ./source/l/libkarma/libkarma-0.1.1.tar.gz
+-rwxr-xr-x   1 root root      3928 2010-12-04 19:32 ./source/l/libkarma/libkarma.SlackBuild
+-rw-r--r--   1 root root       816 2007-02-15 18:44 ./source/l/libkarma/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-06 07:06 ./source/l/liblastfm
+-rw-r--r--   1 root root    119219 2012-06-30 11:25 ./source/l/liblastfm/liblastfm-1.0.1.tar.gz
+-rwxr-xr-x   1 root root      2781 2012-08-15 03:41 ./source/l/liblastfm/liblastfm.SlackBuild
+-rw-r--r--   1 root root       663 2009-10-07 02:58 ./source/l/liblastfm/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libmad
+-rw-r--r--   1 root root    502379 2004-02-17 03:55 ./source/l/libmad/libmad-0.15.1b.tar.gz
+-rw-r--r--   1 root root       189 2004-02-18 03:17 ./source/l/libmad/libmad-0.15.1b.tar.gz.sign
+-rwxr-xr-x   1 root root      3805 2010-08-08 03:18 ./source/l/libmad/libmad.SlackBuild
+-rw-r--r--   1 root root       207 2008-02-19 05:30 ./source/l/libmad/mad.pc
+-rw-r--r--   1 root root      1055 2003-09-10 01:00 ./source/l/libmad/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libmcrypt
+-rw-r--r--   1 root root    875425 2007-02-19 06:56 ./source/l/libmcrypt/libmcrypt-2.5.8.tar.bz2
+-rwxr-xr-x   1 root root      3986 2010-08-08 03:20 ./source/l/libmcrypt/libmcrypt.SlackBuild
+-rw-r--r--   1 root root       634 2009-04-04 21:41 ./source/l/libmcrypt/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 18:06 ./source/l/libmcs
+-rw-r--r--   1 root root     96126 2010-07-14 03:19 ./source/l/libmcs/libmcs-0.7.2.tar.bz2
+-rwxr-xr-x   1 root root      3696 2010-08-09 17:44 ./source/l/libmcs/libmcs.SlackBuild
+-rw-r--r--   1 root root       966 2012-07-22 17:06 ./source/l/libmcs/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-14 23:25 ./source/l/libmng
+-rw-r--r--   1 root root    737812 2007-07-13 13:23 ./source/l/libmng/libmng-1.0.10.tar.xz
+-rwxr-xr-x   1 root root      3759 2010-02-14 23:25 ./source/l/libmng/libmng.SlackBuild
+-rw-r--r--   1 root root       941 2003-08-04 20:41 ./source/l/libmng/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 17:45 ./source/l/libmowgli
+-rw-r--r--   1 root root    104972 2010-07-14 03:43 ./source/l/libmowgli/libmowgli-0.7.1.tar.bz2
+-rwxr-xr-x   1 root root      3854 2010-08-09 17:50 ./source/l/libmowgli/libmowgli.SlackBuild
+-rw-r--r--   1 root root       859 2008-01-30 06:50 ./source/l/libmowgli/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-04 18:31 ./source/l/libmpc
+-rwxr-xr-x   1 root root      3489 2011-02-08 17:36 ./source/l/libmpc/libmpc.SlackBuild
+-rw-r--r--   1 root root    376072 2010-05-14 09:30 ./source/l/libmpc/mpc-0.8.2.tar.xz
+-rw-r--r--   1 root root       833 2010-08-04 18:31 ./source/l/libmpc/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-05 15:46 ./source/l/libmsn
+-rw-r--r--   1 root root    316900 2011-11-25 01:29 ./source/l/libmsn/libmsn-4.2.1.tar.bz2
+-rwxr-xr-x   1 root root      3236 2012-07-04 00:39 ./source/l/libmsn/libmsn.SlackBuild
+-rw-r--r--   1 root root       184 2012-04-05 15:46 ./source/l/libmsn/libmsn.gcc47.diff.gz
+-rw-r--r--   1 root root       771 2012-04-08 20:47 ./source/l/libmsn/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-07 00:50 ./source/l/libmtp
+-rw-r--r--   1 root root    461980 2012-04-03 00:05 ./source/l/libmtp/libmtp-1.1.3.tar.xz
+-rwxr-xr-x   1 root root      4440 2012-08-10 22:30 ./source/l/libmtp/libmtp.SlackBuild
+-rw-r--r--   1 root root      1059 2010-05-03 18:39 ./source/l/libmtp/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/l/libnjb
+-rw-r--r--   1 root root      1674 2007-10-26 01:41 ./source/l/libnjb/80-libnjb.rules
+-rw-r--r--   1 root root    404914 2007-09-05 21:38 ./source/l/libnjb/libnjb-2.2.6.tar.bz2
+-rwxr-xr-x   1 root root      4300 2010-08-09 18:34 ./source/l/libnjb/libnjb.SlackBuild
+-rw-r--r--   1 root root       997 2006-09-07 00:24 ./source/l/libnjb/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libnl
+-rw-r--r--   1 root root    217408 2008-06-08 22:23 ./source/l/libnl/libnl-1.1.tar.bz2
+-rw-r--r--   1 root root       237 2009-02-23 00:09 ./source/l/libnl/libnl-include_limits.h.patch.gz
+-rwxr-xr-x   1 root root      3202 2010-08-09 18:33 ./source/l/libnl/libnl.SlackBuild
+-rw-r--r--   1 root root       112 2009-02-23 00:22 ./source/l/libnl/libnl.info
+-rw-r--r--   1 root root       786 2008-06-08 22:23 ./source/l/libnl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 21:25 ./source/l/libnl3
+-rw-r--r--   1 root root       277 2012-04-07 00:50 ./source/l/libnl3/doinst.sh.gz
+-rw-r--r--   1 root root    875552 2012-06-13 11:50 ./source/l/libnl3/libnl-3.2.11.tar.xz
+-rwxr-xr-x   1 root root      3738 2012-07-08 21:28 ./source/l/libnl3/libnl3.SlackBuild
+-rw-r--r--   1 root root      1012 2012-07-22 17:06 ./source/l/libnl3/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/libnotify
+-rw-r--r--   1 root root    275804 2012-03-27 04:01 ./source/l/libnotify/libnotify-0.7.5.tar.xz
+-rwxr-xr-x   1 root root      2944 2012-06-25 22:55 ./source/l/libnotify/libnotify.SlackBuild
+-rw-r--r--   1 root root       707 2009-05-31 20:27 ./source/l/libnotify/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-07 02:16 ./source/l/libogg
+-rw-r--r--   1 root root    289384 2011-08-04 20:04 ./source/l/libogg/libogg-1.3.0.tar.xz
+-rwxr-xr-x   1 root root      2841 2010-02-06 21:40 ./source/l/libogg/libogg.SlackBuild
+-rw-r--r--   1 root root       762 2003-12-19 00:28 ./source/l/libogg/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-09 20:19 ./source/l/liboggz
+-rw-r--r--   1 root root    420788 2010-04-29 02:10 ./source/l/liboggz/liboggz-1.1.1.tar.xz
+-rwxr-xr-x   1 root root      3352 2011-03-09 20:23 ./source/l/liboggz/liboggz.SlackBuild
+-rw-r--r--   1 root root      1038 2011-03-09 20:18 ./source/l/liboggz/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 18:36 ./source/l/liboil
+-rw-r--r--   1 root root    499068 2010-02-04 21:45 ./source/l/liboil/liboil-0.3.17.tar.xz
+-rwxr-xr-x   1 root root      3252 2010-08-09 18:37 ./source/l/liboil/liboil.SlackBuild
+-rw-r--r--   1 root root      1033 2008-08-01 05:06 ./source/l/liboil/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 03:38 ./source/l/libpcap
+-rw-r--r--   1 root root    608967 2012-07-04 03:38 ./source/l/libpcap/libpcap-1.3.0.tar.gz
+-rw-r--r--   1 root root       308 2012-06-12 17:10 ./source/l/libpcap/libpcap-1.3.0.tar.gz.sig
+-rwxr-xr-x   1 root root      4129 2012-07-04 03:54 ./source/l/libpcap/libpcap.SlackBuild
+-rw-r--r--   1 root root       908 2010-08-05 20:20 ./source/l/libpcap/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 19:47 ./source/l/libplist
+-rw-r--r--   1 root root     68176 2011-03-20 18:17 ./source/l/libplist/libplist-1.4.tar.bz2
+-rwxr-xr-x   1 root root      3592 2011-01-15 19:55 ./source/l/libplist/libplist.SlackBuild
+-rw-r--r--   1 root root       796 2011-01-15 19:44 ./source/l/libplist/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-24 20:17 ./source/l/libpng
+-rw-r--r--   1 root root    539152 2012-07-10 00:37 ./source/l/libpng/libpng-1.2.50.tar.xz
+-rw-r--r--   1 root root    548944 2012-07-10 00:38 ./source/l/libpng/libpng-1.4.12.tar.xz
+-rwxr-xr-x   1 root root      4390 2012-07-24 20:17 ./source/l/libpng/libpng.SlackBuild
+-rw-r--r--   1 root root        48 2012-07-23 21:59 ./source/l/libpng/libpng.url
+-rw-r--r--   1 root root       949 2002-03-23 23:42 ./source/l/libpng/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:53 ./source/l/libproxy
+-rw-r--r--   1 root root       405 2012-04-16 04:36 ./source/l/libproxy/gcc47-include-unistd.h.diff.gz
+-rw-r--r--   1 root root     73908 2011-06-06 21:49 ./source/l/libproxy/libproxy-0.4.7.tar.xz
+-rwxr-xr-x   1 root root      3510 2012-07-20 20:46 ./source/l/libproxy/libproxy.SlackBuild
+-rw-r--r--   1 root root        35 2010-11-04 02:44 ./source/l/libproxy/libproxy.url
+-rw-r--r--   1 root root       699 2012-01-21 13:58 ./source/l/libproxy/only_link_mozjs185.diff.gz
+-rw-r--r--   1 root root       958 2012-07-20 00:52 ./source/l/libproxy/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-17 18:38 ./source/l/libraw1394
+-rw-r--r--   1 root root       191 2007-12-09 17:25 ./source/l/libraw1394/README
+-rw-r--r--   1 root root       249 2011-03-08 19:21 ./source/l/libraw1394/libraw1394-2.0.7.tar.sign
+-rw-r--r--   1 root root    268568 2011-03-08 19:21 ./source/l/libraw1394/libraw1394-2.0.7.tar.xz
+-rwxr-xr-x   1 root root      3633 2010-05-11 01:18 ./source/l/libraw1394/libraw1394.SlackBuild
+-rw-r--r--   1 root root       807 2010-05-11 01:16 ./source/l/libraw1394/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/librsvg
+-rw-r--r--   1 root root    506184 2012-04-16 17:41 ./source/l/librsvg/librsvg-2.36.1.tar.xz
+-rwxr-xr-x   1 root root      3682 2012-06-25 22:55 ./source/l/librsvg/librsvg.SlackBuild
+-rw-r--r--   1 root root       632 2008-02-11 03:44 ./source/l/librsvg/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-17 01:34 ./source/l/libsamplerate
+-rw-r--r--   1 root root   3268548 2009-02-14 11:56 ./source/l/libsamplerate/libsamplerate-0.1.7.tar.xz
+-rwxr-xr-x   1 root root      1741 2011-01-26 05:13 ./source/l/libsamplerate/libsamplerate.SlackBuild
+-rw-r--r--   1 root root      1117 2009-12-17 01:20 ./source/l/libsamplerate/slack-desc
+drwxr-xr-x   2 root root      4096 2011-04-17 16:56 ./source/l/libsndfile
+-rw-r--r--   1 root root    609332 2011-03-23 09:39 ./source/l/libsndfile/libsndfile-1.0.24.tar.xz
+-rwxr-xr-x   1 root root      3189 2011-01-26 17:59 ./source/l/libsndfile/libsndfile.SlackBuild
+-rw-r--r--   1 root root       828 2011-01-23 00:47 ./source/l/libsndfile/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/l/libsoup
+-rw-r--r--   1 root root    620832 2012-04-16 20:11 ./source/l/libsoup/libsoup-2.38.1.tar.xz
+-rwxr-xr-x   1 root root      2958 2012-09-13 20:15 ./source/l/libsoup/libsoup.SlackBuild
+-rw-r--r--   1 root root       808 2012-07-19 00:24 ./source/l/libsoup/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-15 16:50 ./source/l/libspectre
+-rw-r--r--   1 root root    246528 2010-06-10 11:28 ./source/l/libspectre/libspectre-0.2.6.tar.xz
+-rwxr-xr-x   1 root root      3389 2012-07-15 16:51 ./source/l/libspectre/libspectre.SlackBuild
+-rw-r--r--   1 root root       870 2008-10-09 06:04 ./source/l/libspectre/slack-desc
+drwxr-xr-x   2 root root      4096 2011-10-26 15:30 ./source/l/libssh
+-rw-r--r--   1 root root    317336 2011-10-26 15:07 ./source/l/libssh/libssh-0.5.2.tar.gz
+-rwxr-xr-x   1 root root      3448 2012-04-08 18:26 ./source/l/libssh/libssh.SlackBuild
+-rw-r--r--   1 root root       863 2012-04-08 20:47 ./source/l/libssh/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:51 ./source/l/libtasn1
+-rw-r--r--   1 root root   1321520 2012-03-19 09:48 ./source/l/libtasn1/libtasn1-2.12.tar.xz
+-rwxr-xr-x   1 root root      3643 2012-07-19 03:06 ./source/l/libtasn1/libtasn1.SlackBuild
+-rw-r--r--   1 root root       884 2012-07-18 19:02 ./source/l/libtasn1/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 02:22 ./source/l/libtermcap
+-rwxr-xr-x   1 root root      2858 2010-08-09 18:40 ./source/l/libtermcap/libtermcap.SlackBuild
+-rw-r--r--   1 root root       938 2008-02-11 03:44 ./source/l/libtermcap/slack-desc
+-rw-r--r--   1 root root       213 2002-02-15 01:11 ./source/l/libtermcap/termcap-compat_1.2.3.diff.gz
+-rw-r--r--   1 root root       655 2000-02-04 13:21 ./source/l/libtermcap/termcap-compat_1.2.3.dsc
+-rw-r--r--   1 root root    552156 2000-02-04 13:21 ./source/l/libtermcap/termcap-compat_1.2.3.tar.gz
+-rw-r--r--   1 root root       233 2003-01-03 22:22 ./source/l/libtermcap/termcap.bufsize.diff.gz
+-rw-r--r--   1 root root       365 2000-05-10 02:26 ./source/l/libtermcap/termcap.h.diff.gz
+drwxr-xr-x   2 root root      4096 2010-02-17 23:32 ./source/l/libtheora
+-rw-r--r--   1 root root   1434496 2010-01-25 14:33 ./source/l/libtheora/libtheora-1.1.1.tar.xz
+-rwxr-xr-x   1 root root      3783 2010-02-17 23:33 ./source/l/libtheora/libtheora.SlackBuild
+-rw-r--r--   1 root root      1085 2006-09-16 06:01 ./source/l/libtheora/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-07 20:39 ./source/l/libtiff
+-rw-r--r--   1 root root       920 2012-04-07 20:36 ./source/l/libtiff/libtiff-CVE-2012-1173.patch.gz
+-rwxr-xr-x   1 root root      3801 2012-04-07 20:37 ./source/l/libtiff/libtiff.SlackBuild
+-rw-r--r--   1 root root       852 2004-10-28 01:28 ./source/l/libtiff/slack-desc
+-rw-r--r--   1 root root    950900 2012-02-18 22:32 ./source/l/libtiff/tiff-3.9.6.tar.xz
+drwxr-xr-x   2 root root      4096 2012-06-27 22:48 ./source/l/libusb
+drwxr-xr-x   2 root root      4096 2012-06-27 22:55 ./source/l/libusb-compat
+-rw-r--r--   1 root root    218668 2012-04-24 05:50 ./source/l/libusb-compat/libusb-compat-0.1.4.tar.xz
+-rwxr-xr-x   1 root root      4244 2012-06-27 22:55 ./source/l/libusb-compat/libusb-compat.SlackBuild
+-rw-r--r--   1 root root       909 2012-06-27 22:47 ./source/l/libusb-compat/slack-desc
+-rw-r--r--   1 root root    388996 2012-04-20 06:47 ./source/l/libusb/libusb-1.0.9.tar.xz
+-rwxr-xr-x   1 root root      3619 2012-06-27 22:49 ./source/l/libusb/libusb.SlackBuild
+-rw-r--r--   1 root root       734 2012-06-27 22:50 ./source/l/libusb/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 04:06 ./source/l/libvisual
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/libvisual-plugins
+-rw-r--r--   1 root root    575514 2006-03-20 21:09 ./source/l/libvisual-plugins/libvisual-plugins-0.4.0.tar.bz2
+-rwxr-xr-x   1 root root      3460 2010-08-09 18:43 ./source/l/libvisual-plugins/libvisual-plugins.SlackBuild
+-rw-r--r--   1 root root       912 2008-09-12 05:08 ./source/l/libvisual-plugins/libvisual-plugins.gstreamer.diff.gz
+-rw-r--r--   1 root root      1190 2008-09-12 05:35 ./source/l/libvisual-plugins/slack-desc
+-rw-r--r--   1 root root    430496 2006-03-20 21:08 ./source/l/libvisual/libvisual-0.4.0.tar.bz2
+-rwxr-xr-x   1 root root      3586 2012-07-18 04:06 ./source/l/libvisual/libvisual.SlackBuild
+-rw-r--r--   1 root root       238 2012-07-18 04:06 ./source/l/libvisual/libvisual.glib.h.diff.gz
+-rw-r--r--   1 root root      1004 2006-08-23 20:17 ./source/l/libvisual/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-07 16:15 ./source/l/libvncserver
+-rw-r--r--   1 root root   1094284 2012-05-04 17:05 ./source/l/libvncserver/LibVNCServer-0.9.9.tar.xz
+-rwxr-xr-x   1 root root      3764 2012-07-08 19:05 ./source/l/libvncserver/libvncserver.SlackBuild
+-rw-r--r--   1 root root       211 2008-01-08 04:53 ./source/l/libvncserver/libvncserver.info
+-rw-r--r--   1 root root       830 2012-04-08 20:47 ./source/l/libvncserver/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-07 02:29 ./source/l/libvorbis
+-rw-r--r--   1 root root   1087888 2012-02-03 22:30 ./source/l/libvorbis/libvorbis-1.3.3.tar.xz
+-rwxr-xr-x   1 root root      3184 2012-06-25 22:55 ./source/l/libvorbis/libvorbis.SlackBuild
+-rw-r--r--   1 root root      1020 2003-12-18 23:44 ./source/l/libvorbis/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-15 00:24 ./source/l/libwmf
+-rw-r--r--   1 root root   1271924 2006-06-14 06:20 ./source/l/libwmf/libwmf-0.2.8.4.tar.xz
+-rwxr-xr-x   1 root root      3438 2010-02-15 00:24 ./source/l/libwmf/libwmf.SlackBuild
+-rw-r--r--   1 root root       340 2010-02-15 00:24 ./source/l/libwmf/libwmf.png14.diff.gz
+-rw-r--r--   1 root root       745 2003-12-15 20:23 ./source/l/libwmf/slack-desc
+-rw-r--r--   1 root root       767 2003-12-15 20:29 ./source/l/libwmf/slack-desc-docs
+drwxr-xr-x   2 root root      4096 2012-03-16 05:05 ./source/l/libwnck
+-rw-r--r--   1 root root    625300 2011-08-31 09:52 ./source/l/libwnck/libwnck-2.30.7.tar.xz
+-rwxr-xr-x   1 root root      3602 2012-07-08 22:53 ./source/l/libwnck/libwnck.SlackBuild
+-rw-r--r--   1 root root       933 2007-09-15 21:46 ./source/l/libwnck/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-28 08:19 ./source/l/libwpd
+-rw-r--r--   1 root root    499388 2012-07-23 07:46 ./source/l/libwpd/libwpd-0.9.4.tar.xz
+-rwxr-xr-x   1 root root      2943 2012-07-28 08:19 ./source/l/libwpd/libwpd.SlackBuild
+-rw-r--r--   1 root root       773 2006-04-15 21:37 ./source/l/libwpd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/libxklavier
+-rw-r--r--   1 root root    312944 2012-02-16 03:05 ./source/l/libxklavier/libxklavier-5.2.1.tar.xz
+-rwxr-xr-x   1 root root      3482 2012-06-25 22:55 ./source/l/libxklavier/libxklavier.SlackBuild
+-rw-r--r--   1 root root       748 2008-08-01 05:15 ./source/l/libxklavier/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 05:11 ./source/l/libxml2
+-rw-r--r--   1 root root   2756924 2012-05-23 09:36 ./source/l/libxml2/libxml2-2.8.0.tar.xz
+-rwxr-xr-x   1 root root      3503 2012-06-24 15:23 ./source/l/libxml2/libxml2.SlackBuild
+-rw-r--r--   1 root root       980 2008-01-08 23:42 ./source/l/libxml2/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-05 22:12 ./source/l/libxslt
+-rw-r--r--   1 root root   1666032 2009-09-24 14:45 ./source/l/libxslt/libxslt-1.1.26.tar.xz
+-rwxr-xr-x   1 root root      3084 2012-06-19 05:15 ./source/l/libxslt/libxslt.SlackBuild
+-rw-r--r--   1 root root       678 2005-03-26 23:49 ./source/l/libxslt/slack-desc
+drwxr-xr-x   2 root root      4096 2011-07-31 20:11 ./source/l/libyaml
+-rwxr-xr-x   1 root root      3452 2012-07-04 03:30 ./source/l/libyaml/libyaml.SlackBuild
+-rw-r--r--   1 root root        31 2011-07-31 18:46 ./source/l/libyaml/libyaml.url
+-rw-r--r--   1 root root       745 2012-07-04 03:31 ./source/l/libyaml/slack-desc
+-rw-r--r--   1 root root    299136 2011-07-31 19:59 ./source/l/libyaml/yaml-0.1.4.tar.xz
+drwxr-xr-x   2 root root      4096 2010-08-09 18:44 ./source/l/libzip
+-rw-r--r--   1 root root    304965 2010-02-01 09:20 ./source/l/libzip/libzip-0.9.3.tar.bz2
+-rwxr-xr-x   1 root root      3877 2010-08-09 18:45 ./source/l/libzip/libzip.SlackBuild
+-rw-r--r--   1 root root       163 2008-01-08 04:45 ./source/l/libzip/libzip.info
+-rw-r--r--   1 root root       882 2008-08-01 05:16 ./source/l/libzip/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 17:18 ./source/l/loudmouth
+-rw-r--r--   1 root root       240 2012-03-07 16:09 ./source/l/loudmouth/loudmouth-1.4.3-glib-compile-fix.patch.gz
+-rw-r--r--   1 root root    301420 2008-10-29 21:05 ./source/l/loudmouth/loudmouth-1.4.3.tar.xz
+-rwxr-xr-x   1 root root      4640 2012-07-22 21:47 ./source/l/loudmouth/loudmouth.SlackBuild
+-rw-r--r--   1 root root       403 2008-11-29 00:35 ./source/l/loudmouth/loudmouth.async_assertion.diff.gz
+-rw-r--r--   1 root root       272 2009-11-03 22:57 ./source/l/loudmouth/loudmouth.crtpath.diff.gz
+-rw-r--r--   1 root root       399 2010-04-10 20:42 ./source/l/loudmouth/loudmouth.gnutls.configure.ac.diff.gz
+-rw-r--r--   1 root root       429 2009-06-13 21:28 ./source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff.gz
+-rw-r--r--   1 root root       777 2009-11-16 01:46 ./source/l/loudmouth/loudmouth.stanzadrop.diff.gz
+-rw-r--r--   1 root root       900 2010-04-10 20:56 ./source/l/loudmouth/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-13 01:44 ./source/l/lzo
+-rw-r--r--   1 root root    349732 2008-04-30 12:51 ./source/l/lzo/lzo-2.03.tar.xz
+-rwxr-xr-x   1 root root      3397 2010-08-09 18:48 ./source/l/lzo/lzo.SlackBuild
+-rw-r--r--   1 root root       728 2007-06-10 00:52 ./source/l/lzo/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 19:45 ./source/l/media-player-info
+-rw-r--r--   1 root root     79632 2012-05-30 08:50 ./source/l/media-player-info/media-player-info-17.tar.xz
+-rwxr-xr-x   1 root root      2723 2012-07-19 03:06 ./source/l/media-player-info/media-player-info.SlackBuild
+-rw-r--r--   1 root root       978 2010-07-08 05:21 ./source/l/media-player-info/slack-desc
+drwxr-xr-x   2 root root      4096 2011-02-16 01:25 ./source/l/mhash
+-rw-r--r--   1 root root    655906 2008-12-08 00:07 ./source/l/mhash/mhash-0.9.9.9.tar.bz2
+-rwxr-xr-x   1 root root      3637 2011-02-16 21:29 ./source/l/mhash/mhash.SlackBuild
+-rw-r--r--   1 root root       924 2004-05-30 05:13 ./source/l/mhash/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/mm
+-rw-r--r--   1 root root    248658 2006-08-15 07:05 ./source/l/mm/mm-1.4.2.tar.bz2
+-rwxr-xr-x   1 root root      4190 2010-08-09 18:54 ./source/l/mm/mm.SlackBuild
+-rw-r--r--   1 root root      1003 2006-08-10 00:38 ./source/l/mm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-18 23:31 ./source/l/mozilla-nss
+-rw-r--r--   1 root root     25755 2008-02-27 08:35 ./source/l/mozilla-nss/MPL-1.1.txt
+-rw-r--r--   1 root root     18152 2009-01-01 08:10 ./source/l/mozilla-nss/faq.html
+-rw-r--r--   1 root root     17987 2007-06-28 20:04 ./source/l/mozilla-nss/gpl-2.0.txt
+-rw-r--r--   1 root root     26434 2009-04-08 16:39 ./source/l/mozilla-nss/lgpl-2.1.txt
+-rwxr-xr--   1 root root      5663 2012-09-23 17:47 ./source/l/mozilla-nss/mozilla-nss.SlackBuild
+-rw-r--r--   1 root root    753412 2012-06-01 12:24 ./source/l/mozilla-nss/nspr-4.9.1.tar.xz
+-rw-r--r--   1 root root   3917292 2012-06-01 12:26 ./source/l/mozilla-nss/nss-3.13.5.tar.xz
+-rw-r--r--   1 root root      2488 2012-04-29 21:05 ./source/l/mozilla-nss/nss-config.in
+-rw-r--r--   1 root root      1026 2005-03-26 15:21 ./source/l/mozilla-nss/slack-desc
+drwxr-xr-x   3 root root      4096 2012-03-23 00:49 ./source/l/mpfr
+-rw-r--r--   1 root root   1083128 2011-10-03 17:36 ./source/l/mpfr/mpfr-3.1.0.tar.xz
+-rw-r--r--   1 root root        72 2011-10-03 17:36 ./source/l/mpfr/mpfr-3.1.0.tar.xz.sig
+-rwxr-xr-x   1 root root      4065 2012-03-23 00:49 ./source/l/mpfr/mpfr.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-04-05 02:53 ./source/l/mpfr/patches
+-rw-r--r--   1 root root      1042 2006-05-08 19:39 ./source/l/mpfr/slack-desc
+drwxr-xr-x   3 root root      4096 2011-04-05 02:41 ./source/l/ncurses
+-rw-r--r--   1 root root      5711 2002-10-08 13:32 ./source/l/ncurses/Eterm.ti
+-rw-r--r--   1 root root   1656420 2011-04-04 23:18 ./source/l/ncurses/ncurses-5.9.tar.xz
+-rwxr-xr-x   1 root root      5846 2011-04-05 02:45 ./source/l/ncurses/ncurses.SlackBuild
+-rw-r--r--   1 root root       273 2006-12-27 23:21 ./source/l/ncurses/ncurses.mkhashsize.diff.gz
+drwxr-xr-x   2 root root      4096 2011-04-05 02:42 ./source/l/ncurses/patches
+-rw-r--r--   1 root root      2649 2001-03-15 03:08 ./source/l/ncurses/rxvt.terminfo
+-rw-r--r--   1 root root      3709 2003-07-21 15:33 ./source/l/ncurses/screeninfo.src
+-rw-r--r--   1 root root       904 2008-02-11 03:44 ./source/l/ncurses/slack-desc
+-rw-r--r--   1 root root     42014 2007-11-11 23:26 ./source/l/ncurses/xterm.terminfo
+drwxr-xr-x   2 root root      4096 2012-05-14 19:37 ./source/l/neon
+-rw-r--r--   1 root root    612352 2011-05-03 12:18 ./source/l/neon/neon-0.29.6.tar.xz
+-rwxr-xr-x   1 root root      4015 2012-07-04 00:17 ./source/l/neon/neon.SlackBuild
+-rw-r--r--   1 root root       798 2006-09-18 07:08 ./source/l/neon/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-15 01:04 ./source/l/netpbm
+-rw-r--r--   1 root root      9563 2010-02-15 00:59 ./source/l/netpbm/config.mk.gz
+-rw-r--r--   1 root root   1917188 2010-02-15 01:03 ./source/l/netpbm/netpbm-10.49.02.tar.xz
+-rw-r--r--   1 root root    322974 2004-04-11 19:27 ./source/l/netpbm/netpbm-manpages.tar.bz2
+-rwxr-xr-x   1 root root      4039 2010-02-15 00:59 ./source/l/netpbm/netpbm.SlackBuild
+-rw-r--r--   1 root root       688 2004-04-11 19:47 ./source/l/netpbm/slack-desc
+-rwxr-xr-x   1 root root        77 2007-02-16 00:17 ./source/l/netpbm/svn-checkout-stable.sh
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/notify-python
+-rw-r--r--   1 root root       460 2012-01-03 01:33 ./source/l/notify-python/libnotify07.patch.gz
+-rw-r--r--   1 root root    214514 2006-10-08 18:07 ./source/l/notify-python/notify-python-0.1.1.tar.bz2
+-rwxr-xr-x   1 root root      3126 2012-07-10 18:15 ./source/l/notify-python/notify-python.SlackBuild
+-rw-r--r--   1 root root       818 2012-07-22 17:07 ./source/l/notify-python/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 19:15 ./source/l/openexr
+-rw-r--r--   1 root root  12080576 2010-07-23 02:16 ./source/l/openexr/openexr-1.7.0.tar.xz
+-rwxr-xr-x   1 root root      3557 2010-08-09 19:15 ./source/l/openexr/openexr.SlackBuild
+-rw-r--r--   1 root root       367 2010-08-09 19:14 ./source/l/openexr/openexr.gcc4.diff.gz
+-rw-r--r--   1 root root       162 2008-04-29 21:13 ./source/l/openexr/openexr.info
+-rw-r--r--   1 root root       915 2008-08-01 02:42 ./source/l/openexr/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/pango
+-rw-r--r--   1 root root   1162828 2012-06-05 11:07 ./source/l/pango/pango-1.30.1.tar.xz
+-rwxr-xr-x   1 root root      5196 2012-06-25 22:55 ./source/l/pango/pango.SlackBuild
+-rw-r--r--   1 root root       502 2010-10-13 20:53 ./source/l/pango/pango.etc.host.location.diff.gz
+-rw-r--r--   1 root root       885 2008-02-11 03:44 ./source/l/pango/slack-desc
+-rw-r--r--   1 root root      2324 2009-08-11 18:03 ./source/l/pango/update-pango-querymodules
+drwxr-xr-x   2 root root      4096 2010-07-12 08:23 ./source/l/parted
+-rw-r--r--   1 root root   1454340 2010-05-28 18:40 ./source/l/parted/parted-2.3.tar.xz
+-rwxr-xr-x   1 root root      4158 2010-02-07 03:35 ./source/l/parted/parted.SlackBuild
+-rwxr-xr-x   1 root root      4158 2010-02-07 03:35 ./source/l/parted/parted.SlackBuild.static
+-rw-r--r--   1 root root       341 2010-07-12 08:23 ./source/l/parted/parted.configure.diff.gz
+-rw-r--r--   1 root root       840 2002-06-05 05:27 ./source/l/parted/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-26 05:22 ./source/l/pcre
+-rw-r--r--   1 root root    759088 2011-01-15 17:31 ./source/l/pcre/pcre-8.12.tar.xz
+-rwxr-xr-x   1 root root      4084 2011-03-26 05:22 ./source/l/pcre/pcre.SlackBuild
+-rw-r--r--   1 root root       819 2002-03-30 19:17 ./source/l/pcre/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-09 19:43 ./source/l/phonon
+drwxr-xr-x   2 root root      4096 2012-08-14 16:24 ./source/l/phonon-gstreamer
+-rw-r--r--   1 root root     71672 2012-08-12 17:08 ./source/l/phonon-gstreamer/phonon-backend-gstreamer-4.6.2.tar.xz
+-rwxr-xr-x   1 root root      3787 2012-04-08 18:26 ./source/l/phonon-gstreamer/phonon-gstreamer.SlackBuild
+-rw-r--r--   1 root root       914 2012-04-08 20:47 ./source/l/phonon-gstreamer/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 15:11 ./source/l/phonon-mplayer
+-rw-r--r--   1 root root     12619 2010-12-17 21:00 ./source/l/phonon-mplayer/cmake_fixes.tar.gz
+-rw-r--r--   1 root root    342904 2012-04-01 15:07 ./source/l/phonon-mplayer/phonon-mplayer-1b1fd1f_20110823git.tar.xz
+-rwxr-xr-x   1 root root      3645 2012-04-08 18:26 ./source/l/phonon-mplayer/phonon-mplayer.SlackBuild
+-rw-r--r--   1 root root       837 2012-04-08 20:47 ./source/l/phonon-mplayer/slack-desc
+drwxr-xr-x   2 root root      4096 2011-12-16 14:29 ./source/l/phonon-xine
+-rw-r--r--   1 root root      7622 2011-12-16 14:29 ./source/l/phonon-xine/phonon-backend-xine-4.4.4.find.phonon.patch
+-rw-r--r--   1 root root     94556 2011-01-21 12:33 ./source/l/phonon-xine/phonon-backend-xine-4.4.4.tar.bz2
+-rwxr-xr-x   1 root root      4128 2012-04-08 18:26 ./source/l/phonon-xine/phonon-xine.SlackBuild
+-rw-r--r--   1 root root       836 2012-04-08 20:47 ./source/l/phonon-xine/slack-desc
+-rw-r--r--   1 root root    280712 2012-04-01 11:01 ./source/l/phonon/phonon-4.6.0.tar.xz
+-rwxr-xr-x   1 root root      3936 2012-04-08 18:22 ./source/l/phonon/phonon.SlackBuild
+-rw-r--r--   1 root root       882 2012-04-08 20:47 ./source/l/phonon/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-14 23:47 ./source/l/pil
+-rw-r--r--   1 root root    400368 2009-11-15 18:20 ./source/l/pil/Imaging-1.1.7.tar.xz
+-rwxr-xr-x   1 root root      3218 2012-06-19 19:51 ./source/l/pil/pil.SlackBuild
+-rw-r--r--   1 root root       873 2009-04-30 19:57 ./source/l/pil/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-02 07:06 ./source/l/pilot-link
+-rw-r--r--   1 root root   1578735 2010-02-07 03:44 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2
+-rw-r--r--   1 root root       198 2010-02-07 04:48 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2.asc
+-rwxr-xr-x   1 root root      4256 2012-06-19 18:50 ./source/l/pilot-link/pilot-link.SlackBuild
+-rw-r--r--   1 root root       645 2010-02-19 18:53 ./source/l/pilot-link/pilot-link.png14.diff.gz
+-rw-r--r--   1 root root       877 2008-02-11 03:44 ./source/l/pilot-link/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-09 05:01 ./source/l/polkit
+drwxr-xr-x   2 root root      4096 2012-07-08 01:03 ./source/l/polkit-gnome
+-rw-r--r--   1 root root    335148 2011-08-16 21:23 ./source/l/polkit-gnome/polkit-gnome-0.102.tar.xz
+-rw-r--r--   1 root root      4581 2011-02-25 05:43 ./source/l/polkit-gnome/polkit-gnome-authentication-agent-1.desktop
+-rwxr-xr-x   1 root root      3603 2012-06-25 22:55 ./source/l/polkit-gnome/polkit-gnome.SlackBuild
+-rw-r--r--   1 root root       829 2010-05-06 00:15 ./source/l/polkit-gnome/slack-desc
+drwxr-xr-x   2 root root      4096 2011-12-16 08:12 ./source/l/polkit-qt-1
+-rw-r--r--   1 root root     67592 2011-12-16 08:12 ./source/l/polkit-qt-1/polkit-qt-1-0.103.0.tar.bz2
+-rwxr-xr-x   1 root root      3355 2012-04-08 18:22 ./source/l/polkit-qt-1/polkit-qt-1.SlackBuild
+-rw-r--r--   1 root root       258 2010-12-02 21:22 ./source/l/polkit-qt-1/pull-polkit-qt-1
+-rw-r--r--   1 root root       903 2012-04-08 20:47 ./source/l/polkit-qt-1/slack-desc
+-rw-r--r--   1 root root       128 2012-08-08 22:25 ./source/l/polkit/10-org.freedesktop.NetworkManager.pkla
+-rw-r--r--   1 root root       185 2012-08-11 02:38 ./source/l/polkit/20-plugdev-group-mount-override.pkla
+-rw-r--r--   1 root root       335 2012-08-09 05:01 ./source/l/polkit/doinst.sh.gz
+-rw-r--r--   1 root root    616292 2012-04-24 16:47 ./source/l/polkit/polkit-0.105.tar.xz
+-rwxr-xr-x   1 root root      4951 2012-08-11 02:38 ./source/l/polkit/polkit.SlackBuild
+-rw-r--r--   1 root root       906 2010-01-06 23:14 ./source/l/polkit/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-02 20:56 ./source/l/poppler
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/poppler-data
+-rw-r--r--   1 root root   1451056 2011-08-31 21:05 ./source/l/poppler-data/poppler-data-0.4.5.tar.xz
+-rwxr-xr-x   1 root root      2344 2012-06-25 22:55 ./source/l/poppler-data/poppler-data.SlackBuild
+-rw-r--r--   1 root root      1064 2007-04-12 01:35 ./source/l/poppler-data/slack-desc
+-rw-r--r--   1 root root   1424336 2012-08-02 13:42 ./source/l/poppler/poppler-0.20.2.tar.xz
+-rwxr-xr-x   1 root root      3940 2012-08-02 15:31 ./source/l/poppler/poppler.SlackBuild
+-rw-r--r--   1 root root       660 2012-08-02 15:28 ./source/l/poppler/poppler_xyscale.patch.gz
+-rw-r--r--   1 root root       952 2007-04-10 20:40 ./source/l/poppler/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/popt
+-rw-r--r--   1 root root    489869 2002-09-17 20:57 ./source/l/popt/popt-1.7.tar.bz2
+-rwxr-xr-x   1 root root      3755 2010-04-26 02:44 ./source/l/popt/popt.SlackBuild
+-rw-r--r--   1 root root      1047 2003-02-22 21:32 ./source/l/popt/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-29 12:34 ./source/l/pycairo
+-rw-r--r--   1 root root    447388 2010-05-20 11:42 ./source/l/pycairo/py2cairo-1.8.10.tar.xz
+-rwxr-xr-x   1 root root      3484 2012-06-19 19:17 ./source/l/pycairo/pycairo.SlackBuild
+-rw-r--r--   1 root root        68 2009-12-14 01:46 ./source/l/pycairo/pycairo.url
+-rw-r--r--   1 root root       745 2010-07-29 12:34 ./source/l/pycairo/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 18:02 ./source/l/pycups
+-rw-r--r--   1 root root     52018 2012-03-06 11:43 ./source/l/pycups/pycups-1.9.61.tar.bz2
+-rwxr-xr-x   1 root root      2849 2010-02-17 20:51 ./source/l/pycups/pycups.SlackBuild
+-rw-r--r--   1 root root       121 2008-07-25 02:41 ./source/l/pycups/pycups.info
+-rw-r--r--   1 root root       688 2008-08-01 05:49 ./source/l/pycups/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-26 19:51 ./source/l/pycurl
+-rw-r--r--   1 root root     71346 2008-09-09 17:43 ./source/l/pycurl/pycurl-7.19.0.tar.gz
+-rwxr-xr-x   1 root root      2832 2012-07-04 16:48 ./source/l/pycurl/pycurl.SlackBuild
+-rw-r--r--   1 root root       840 2012-06-26 19:58 ./source/l/pycurl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 17:57 ./source/l/pygobject
+-rw-r--r--   1 root root    747248 2011-06-13 18:37 ./source/l/pygobject/pygobject-2.28.6.tar.xz
+-rwxr-xr-x   1 root root      3568 2012-09-04 17:58 ./source/l/pygobject/pygobject.SlackBuild
+-rw-r--r--   1 root root       646 2012-09-04 17:33 ./source/l/pygobject/pygobject.flags.diff.gz
+-rw-r--r--   1 root root        72 2009-12-14 01:44 ./source/l/pygobject/pygobject.url
+-rw-r--r--   1 root root       858 2008-02-11 03:44 ./source/l/pygobject/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/l/pygtk
+-rw-r--r--   1 root root   1978692 2011-04-01 13:05 ./source/l/pygtk/pygtk-2.24.0.tar.xz
+-rwxr-xr-x   1 root root      3483 2012-06-25 22:55 ./source/l/pygtk/pygtk.SlackBuild
+-rw-r--r--   1 root root       777 2008-01-09 04:33 ./source/l/pygtk/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-09 20:14 ./source/l/pyrex
+-rw-r--r--   1 root root    197340 2010-04-12 00:05 ./source/l/pyrex/Pyrex-0.9.9.tar.xz
+-rw-r--r--   1 root root        58 2009-03-05 18:42 ./source/l/pyrex/Pyrex.url
+-rwxr-xr-x   1 root root      3113 2012-06-19 20:13 ./source/l/pyrex/pyrex.SlackBuild
+-rw-r--r--   1 root root       847 2009-03-05 18:42 ./source/l/pyrex/slack-desc
+drwxr-xr-x   2 root root      4096 2009-11-03 22:35 ./source/l/qca
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/qca-cyrus-sasl
+-rw-r--r--   1 root root     24075 2007-11-08 04:25 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl-2.0.0-beta3.tar.bz2
+-rwxr-xr-x   1 root root      2942 2010-08-09 20:18 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl.SlackBuild
+-rw-r--r--   1 root root       745 2012-07-22 17:08 ./source/l/qca-cyrus-sasl/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/qca-gnupg
+-rw-r--r--   1 root root     38177 2008-04-23 23:14 ./source/l/qca-gnupg/qca-gnupg-2.0.0-beta3.tar.bz2
+-rwxr-xr-x   1 root root      2930 2010-08-09 20:19 ./source/l/qca-gnupg/qca-gnupg.SlackBuild
+-rw-r--r--   1 root root       656 2008-07-31 03:43 ./source/l/qca-gnupg/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 03:16 ./source/l/qca-ossl
+-rw-r--r--   1 root root     49188 2007-12-11 17:47 ./source/l/qca-ossl/qca-ossl-2.0.0-beta3.tar.bz2
+-rw-r--r--   1 root root      1274 2012-07-04 03:09 ./source/l/qca-ossl/qca-ossl-openssl-1.0.0.patch.gz
+-rwxr-xr-x   1 root root      3059 2012-07-04 03:16 ./source/l/qca-ossl/qca-ossl.SlackBuild
+-rw-r--r--   1 root root       947 2008-07-31 03:44 ./source/l/qca-ossl/slack-desc
+-rw-r--r--   1 root root   1937201 2009-04-29 21:47 ./source/l/qca/qca-2.0.2.tar.bz2
+-rwxr-xr-x   1 root root      2883 2009-11-03 22:35 ./source/l/qca/qca.SlackBuild
+-rw-r--r--   1 root root       112 2008-07-24 15:03 ./source/l/qca/qca.info
+-rw-r--r--   1 root root      1021 2006-07-31 21:42 ./source/l/qca/slack-desc
+drwxr-xr-x   2 root root      4096 2010-07-05 14:04 ./source/l/qimageblitz
+-rw-r--r--   1 root root     57681 2010-07-05 14:01 ./source/l/qimageblitz/qimageblitz-0.0.6.tar.bz2
+-rwxr-xr-x   1 root root      2906 2010-07-05 14:03 ./source/l/qimageblitz/qimageblitz.SlackBuild
+-rw-r--r--   1 root root       278 2007-12-18 16:29 ./source/l/qimageblitz/qimageblitz.info
+-rw-r--r--   1 root root       851 2008-08-01 05:40 ./source/l/qimageblitz/slack-desc
+drwxr-xr-x   3 root root      4096 2012-08-30 15:51 ./source/l/qt
+-rw-r--r--   1 root root       769 2012-06-09 20:58 ./source/l/qt/QElfParser-fix-type-of-sh_size.patch.gz
+-rw-r--r--   1 root root       875 2012-06-02 12:43 ./source/l/qt/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch.gz
+-rw-r--r--   1 root root      1626 2012-06-02 12:43 ./source/l/qt/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch.gz
+-rw-r--r--   1 root root       348 2012-05-16 23:38 ./source/l/qt/Qt.pc
+-rw-r--r--   1 root root       327 2010-11-21 00:00 ./source/l/qt/README
+-rw-r--r--   1 root root       150 2011-12-16 11:41 ./source/l/qt/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2008-10-03 20:21 ./source/l/qt/profile.d
+-rw-r--r--   1 root root       661 2008-10-03 20:23 ./source/l/qt/profile.d/qt4.csh
+-rw-r--r--   1 root root       561 2008-10-03 20:23 ./source/l/qt/profile.d/qt4.sh
+-rw-r--r--   1 root root 187916376 2012-05-14 08:54 ./source/l/qt/qt-everywhere-opensource-src-4.8.2.tar.xz
+-rwxr-xr-x   1 root root     10585 2012-08-30 15:51 ./source/l/qt/qt.SlackBuild
+-rw-r--r--   1 root root       307 2012-07-04 19:06 ./source/l/qt/qt.assistant.memcpy-crash.diff.gz
+-rw-r--r--   1 root root       691 2012-07-04 17:53 ./source/l/qt/qt.ca89c49.cursor.position.diff.gz
+-rw-r--r--   1 root root       458 2012-03-25 21:18 ./source/l/qt/qt.ld-gold.patch.gz
+-rw-r--r--   1 root root       277 2008-04-03 01:53 ./source/l/qt/qt.mysql.h.diff.gz
+-rw-r--r--   1 root root       496 2012-04-01 21:01 ./source/l/qt/qt.webkit-no_Werror.patch.gz
+-rw-r--r--   1 root root       274 2012-08-07 00:54 ./source/l/qt/qt.webkit.glib.diff.gz
+-rw-r--r--   1 root root       719 2012-04-08 20:47 ./source/l/qt/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-05 16:27 ./source/l/qtscriptgenerator
+-rw-r--r--   1 root root       564 2009-06-05 09:21 ./source/l/qtscriptgenerator/include-everything.patch.gz
+-rw-r--r--   1 root root    278728 2012-01-23 11:42 ./source/l/qtscriptgenerator/qtscriptgenerator-src-0.2.0.tar.xz
+-rwxr-xr-x   1 root root      3891 2012-04-05 16:27 ./source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild
+-rw-r--r--   1 root root       292 2009-06-05 09:22 ./source/l/qtscriptgenerator/qtscriptgenerator.info
+-rw-r--r--   1 root root       957 2012-07-22 17:09 ./source/l/qtscriptgenerator/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-29 07:48 ./source/l/raptor2
+-rw-r--r--   1 root root   1010684 2012-07-29 09:48 ./source/l/raptor2/raptor2-2.0.8.tar.xz
+-rwxr-xr-x   1 root root      4034 2012-07-29 07:44 ./source/l/raptor2/raptor2.SlackBuild
+-rw-r--r--   1 root root      1015 2012-04-08 18:41 ./source/l/raptor2/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-21 02:00 ./source/l/rasqal
+-rw-r--r--   1 root root    917764 2012-05-14 03:46 ./source/l/rasqal/rasqal-0.9.29.tar.xz
+-rwxr-xr-x   1 root root      3983 2012-04-08 18:22 ./source/l/rasqal/rasqal.SlackBuild
+-rw-r--r--   1 root root       885 2012-04-08 20:47 ./source/l/rasqal/slack-desc
+drwxr-xr-x   3 root root      4096 2009-05-19 20:05 ./source/l/readline
+drwxr-xr-x   2 root root      4096 2009-02-21 22:42 ./source/l/readline/readline-5.2-patches
+-rw-r--r--   1 root root       874 2006-12-12 21:25 ./source/l/readline/readline-5.2-patches/readline52-001
+-rw-r--r--   1 root root        65 2006-12-12 21:25 ./source/l/readline/readline-5.2-patches/readline52-001.sig
+-rw-r--r--   1 root root      1433 2007-03-21 18:47 ./source/l/readline/readline-5.2-patches/readline52-002
+-rw-r--r--   1 root root        65 2007-03-21 18:47 ./source/l/readline/readline-5.2-patches/readline52-002.sig
+-rw-r--r--   1 root root      1204 2007-04-25 18:00 ./source/l/readline/readline-5.2-patches/readline52-003
+-rw-r--r--   1 root root        65 2007-04-25 18:00 ./source/l/readline/readline-5.2-patches/readline52-003.sig
+-rw-r--r--   1 root root      2192 2007-04-25 18:00 ./source/l/readline/readline-5.2-patches/readline52-004
+-rw-r--r--   1 root root        65 2007-04-25 18:00 ./source/l/readline/readline-5.2-patches/readline52-004.sig
+-rw-r--r--   1 root root      8029 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-005
+-rw-r--r--   1 root root        65 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-005.sig
+-rw-r--r--   1 root root      2820 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-006
+-rw-r--r--   1 root root        65 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-006.sig
+-rw-r--r--   1 root root      1523 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-007
+-rw-r--r--   1 root root        65 2007-08-22 13:22 ./source/l/readline/readline-5.2-patches/readline52-007.sig
+-rw-r--r--   1 root root      2277 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-008
+-rw-r--r--   1 root root        65 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-008.sig
+-rw-r--r--   1 root root      1332 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-009
+-rw-r--r--   1 root root        65 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-009.sig
+-rw-r--r--   1 root root      1543 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-010
+-rw-r--r--   1 root root        65 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-010.sig
+-rw-r--r--   1 root root       886 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-011
+-rw-r--r--   1 root root        65 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-011.sig
+-rw-r--r--   1 root root      3870 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-012
+-rw-r--r--   1 root root        65 2007-12-15 03:56 ./source/l/readline/readline-5.2-patches/readline52-012.sig
+-rw-r--r--   1 root root      5147 2008-11-18 16:19 ./source/l/readline/readline-5.2-patches/readline52-013
+-rw-r--r--   1 root root        65 2008-11-18 16:19 ./source/l/readline/readline-5.2-patches/readline52-013.sig
+-rw-r--r--   1 root root   1693789 2006-10-11 16:12 ./source/l/readline/readline-5.2.tar.bz2
+-rwxr-xr-x   1 root root      3079 2010-08-09 20:20 ./source/l/readline/readline.SlackBuild
+-rw-r--r--   1 root root      1018 2002-03-23 23:44 ./source/l/readline/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-16 21:44 ./source/l/redland
+-rw-r--r--   1 root root    849408 2012-04-01 12:09 ./source/l/redland/redland-1.0.15.tar.xz
+-rwxr-xr-x   1 root root      4667 2012-07-04 02:44 ./source/l/redland/redland.SlackBuild
+-rw-r--r--   1 root root       984 2012-04-08 18:42 ./source/l/redland/slack-desc
+drwxr-xr-x   2 root root      4096 2011-04-25 13:38 ./source/l/sdl
+-rw-r--r--   1 root root   3077408 2009-10-20 03:53 ./source/l/sdl/SDL-1.2.14.tar.xz
+-rw-r--r--   1 root root   1212636 2009-11-15 09:44 ./source/l/sdl/SDL_image-1.2.10.tar.xz
+-rw-r--r--   1 root root   2525128 2009-11-15 09:42 ./source/l/sdl/SDL_mixer-1.2.11.tar.xz
+-rw-r--r--   1 root root       212 2010-02-14 23:16 ./source/l/sdl/SDL_mixer.usrlocal.diff.gz
+-rw-r--r--   1 root root    223252 2007-07-21 08:04 ./source/l/sdl/SDL_net-1.2.7.tar.xz
+-rw-r--r--   1 root root   1221848 2009-10-19 08:22 ./source/l/sdl/SDL_ttf-2.0.10.tar.xz
+-rwxr-xr-x   1 root root      7264 2011-04-25 05:25 ./source/l/sdl/sdl.SlackBuild
+-rw-r--r--   1 root root       637 2011-04-25 05:25 ./source/l/sdl/sdl.linux-2.6.31.input_absinfo.diff.gz
+-rw-r--r--   1 root root       941 2004-03-27 18:28 ./source/l/sdl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 10:34 ./source/l/sg3_utils
+-rw-r--r--   1 root root    615732 2012-01-19 14:39 ./source/l/sg3_utils/sg3_utils-1.33.tar.xz
+-rwxr-xr-x   1 root root      3515 2012-04-08 18:23 ./source/l/sg3_utils/sg3_utils.SlackBuild
+-rw-r--r--   1 root root        25 2010-11-10 05:18 ./source/l/sg3_utils/sg3_utils.info
+-rw-r--r--   1 root root      1043 2012-04-08 18:42 ./source/l/sg3_utils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 12:11 ./source/l/shared-desktop-ontologies
+-rw-r--r--   1 root root   3967052 2012-04-01 12:11 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies-0.9.0.tar.bz2
+-rwxr-xr-x   1 root root      3529 2012-04-08 18:26 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild
+-rw-r--r--   1 root root      1119 2012-04-08 20:48 ./source/l/shared-desktop-ontologies/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-14 19:15 ./source/l/shared-mime-info
+-rw-r--r--   1 root root       357 2012-08-14 19:15 ./source/l/shared-mime-info/doinst.sh.gz
+-rw-r--r--   1 root root    496700 2012-01-17 16:30 ./source/l/shared-mime-info/shared-mime-info-1.0.tar.xz
+-rwxr-xr-x   1 root root      4079 2012-08-14 19:15 ./source/l/shared-mime-info/shared-mime-info.SlackBuild
+-rw-r--r--   1 root root       979 2007-12-23 22:25 ./source/l/shared-mime-info/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-01 10:41 ./source/l/sip
+-rw-r--r--   1 root root    447852 2012-04-01 10:41 ./source/l/sip/sip-4.13.2.tar.xz
+-rwxr-xr-x   1 root root      3350 2012-06-19 06:14 ./source/l/sip/sip.SlackBuild
+-rw-r--r--   1 root root       147 2009-11-28 04:43 ./source/l/sip/sip.info
+-rw-r--r--   1 root root       849 2012-04-08 20:48 ./source/l/sip/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-01 20:16 ./source/l/slang
+-rw-r--r--   1 root root       994 2006-08-01 05:37 ./source/l/slang/slack-desc
+-rw-r--r--   1 root root   1424726 2010-12-13 07:23 ./source/l/slang/slang-2.2.3.tar.bz2
+-rw-r--r--   1 root root       262 2010-12-13 07:26 ./source/l/slang/slang-2.2.3.tar.bz2.asc
+-rwxr-xr-x   1 root root      3784 2011-01-01 20:16 ./source/l/slang/slang.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/slang1
+-rw-r--r--   1 root root      1006 2006-08-01 05:37 ./source/l/slang1/slack-desc
+-rw-r--r--   1 root root    631079 2003-03-23 05:58 ./source/l/slang1/slang-1.4.9.tar.bz2
+-rwxr-xr-x   1 root root      3303 2010-08-09 21:12 ./source/l/slang1/slang1.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-20 23:30 ./source/l/soprano
+-rw-r--r--   1 root root       846 2012-04-08 20:48 ./source/l/soprano/slack-desc
+-rw-r--r--   1 root root   1954245 2012-05-16 08:36 ./source/l/soprano/soprano-2.7.6.tar.bz2
+-rwxr-xr-x   1 root root      3308 2012-04-08 18:23 ./source/l/soprano/soprano.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/l/sound-theme-freedesktop
+-rw-r--r--   1 root root       955 2012-07-19 00:43 ./source/l/sound-theme-freedesktop/slack-desc
+-rw-r--r--   1 root root    447864 2010-01-28 22:38 ./source/l/sound-theme-freedesktop/sound-theme-freedesktop-0.7.tar.xz
+-rwxr-xr-x   1 root root      2482 2012-07-18 21:27 ./source/l/sound-theme-freedesktop/sound-theme-freedesktop.SlackBuild
+-rw-r--r--   1 root root       104 2012-05-01 01:36 ./source/l/sound-theme-freedesktop/sound-theme-freedesktop.url
+drwxr-xr-x   2 root root      4096 2011-10-08 21:42 ./source/l/startup-notification
+-rw-r--r--   1 root root       830 2008-02-11 03:44 ./source/l/startup-notification/slack-desc
+-rw-r--r--   1 root root    242256 2011-05-16 14:32 ./source/l/startup-notification/startup-notification-0.12.tar.xz
+-rwxr-xr-x   1 root root      3059 2011-10-08 21:42 ./source/l/startup-notification/startup-notification.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-26 23:39 ./source/l/strigi
+-rw-r--r--   1 root root       622 2011-10-04 23:08 ./source/l/strigi/README
+-rw-r--r--   1 root root       965 2008-08-01 01:27 ./source/l/strigi/slack-desc
+-rw-r--r--   1 root root    693748 2012-01-09 15:01 ./source/l/strigi/strigi-0.7.7.tar.xz
+-rw-r--r--   1 root root       325 2012-04-08 19:55 ./source/l/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff.gz
+-rwxr-xr-x   1 root root      3725 2012-07-26 23:39 ./source/l/strigi/strigi.SlackBuild
+-rw-r--r--   1 root root       146 2008-05-17 02:12 ./source/l/strigi/strigi.info
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/svgalib
+-rw-r--r--   1 root root       802 2009-03-09 23:10 ./source/l/svgalib/slack-desc
+-rw-r--r--   1 root root       509 2008-05-31 14:12 ./source/l/svgalib/svgalib-1.9.25-kernel-2.6.26.diff.gz
+-rw-r--r--   1 root root    807984 2006-07-14 11:57 ./source/l/svgalib/svgalib-1.9.25.tar.bz2
+-rwxr-xr-x   1 root root      4097 2010-08-09 21:12 ./source/l/svgalib/svgalib.SlackBuild
+-rw-r--r--   1 root root       271 2009-03-09 23:07 ./source/l/svgalib/svgalib.nohelper.diff.gz
+-rw-r--r--   1 root root       282 2007-03-30 00:48 ./source/l/svgalib/svgalib.prefix.diff.gz
+drwxr-xr-x   2 root root      4096 2012-06-19 20:05 ./source/l/system-config-printer
+-rw-r--r--   1 root root       389 2010-12-09 13:03 ./source/l/system-config-printer/doinst.sh.gz
+-rw-r--r--   1 root root      1217 2010-05-04 01:23 ./source/l/system-config-printer/slack-desc
+-rw-r--r--   1 root root    992152 2012-03-01 14:27 ./source/l/system-config-printer/system-config-printer-1.3.9.tar.xz
+-rwxr-xr-x   1 root root      4432 2012-04-08 18:26 ./source/l/system-config-printer/system-config-printer.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-10 19:12 ./source/l/t1lib
+-rw-r--r--   1 root root       813 2002-04-30 02:17 ./source/l/t1lib/slack-desc
+-rw-r--r--   1 root root   1429408 2007-12-23 16:07 ./source/l/t1lib/t1lib-5.1.2.tar.xz
+-rwxr-xr-x   1 root root      4593 2012-08-10 19:12 ./source/l/t1lib/t1lib.SlackBuild
+-rw-r--r--   1 root root     20775 2012-05-09 13:38 ./source/l/t1lib/t1lib_5.1.2-3.5.diff.gz
+drwxr-xr-x   2 root root      4096 2012-06-19 22:59 ./source/l/taglib
+drwxr-xr-x   2 root root      4096 2009-12-17 02:17 ./source/l/taglib-extras
+-rw-r--r--   1 root root       985 2009-06-05 09:55 ./source/l/taglib-extras/slack-desc
+-rw-r--r--   1 root root     31363 2009-09-21 21:36 ./source/l/taglib-extras/taglib-extras-1.0.1.tar.gz
+-rwxr-xr-x   1 root root      2976 2010-08-09 21:14 ./source/l/taglib-extras/taglib-extras.SlackBuild
+-rw-r--r--   1 root root       797 2004-02-22 08:50 ./source/l/taglib/slack-desc
+-rw-r--r--   1 root root    420984 2012-04-20 16:41 ./source/l/taglib/taglib-1.7.2.tar.xz
+-rwxr-xr-x   1 root root      2900 2012-06-19 23:09 ./source/l/taglib/taglib.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/tango-icon-theme
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/l/tango-icon-theme-extras
+-rw-r--r--   1 root root      1015 2008-02-27 07:27 ./source/l/tango-icon-theme-extras/slack-desc
+-rw-r--r--   1 root root    128095 2006-06-01 19:07 ./source/l/tango-icon-theme-extras/tango-icon-theme-extras-0.1.0.tar.bz2
+-rwxr-xr-x   1 root root      2937 2009-05-19 20:05 ./source/l/tango-icon-theme-extras/tango-icon-theme-extras.SlackBuild
+-rw-r--r--   1 root root       990 2008-02-27 07:13 ./source/l/tango-icon-theme/slack-desc
+-rw-r--r--   1 root root   1376581 2009-02-26 03:21 ./source/l/tango-icon-theme/tango-icon-theme-0.8.90.tar.bz2
+-rwxr-xr-x   1 root root      2033 2009-05-19 20:05 ./source/l/tango-icon-theme/tango-icon-theme.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-19 18:51 ./source/l/urwid
+-rw-r--r--   1 root root      9389 2009-03-13 22:05 ./source/l/urwid/LICENSE.gz
+-rw-r--r--   1 root root       843 2009-04-21 15:06 ./source/l/urwid/slack-desc
+-rw-r--r--   1 root root    284592 2012-06-19 18:51 ./source/l/urwid/urwid-1.0.1.tar.gz
+-rwxr-xr-x   1 root root      2922 2012-06-19 18:52 ./source/l/urwid/urwid.SlackBuild
+-rw-r--r--   1 root root        24 2009-03-14 23:33 ./source/l/urwid/urwid.url
+drwxr-xr-x   2 root root      4096 2012-07-04 17:07 ./source/l/v4l-utils
+-rw-r--r--   1 root root      1012 2012-07-22 17:10 ./source/l/v4l-utils/slack-desc
+-rw-r--r--   1 root root    362716 2012-04-14 17:37 ./source/l/v4l-utils/v4l-utils-0.8.8.tar.xz
+-rwxr-xr-x   1 root root      4294 2012-07-04 17:08 ./source/l/v4l-utils/v4l-utils.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-09-14 21:49 ./source/l/virtuoso-ose
+-rw-r--r--   1 root root       267 2009-12-24 23:22 ./source/l/virtuoso-ose/doinst.sh.gz
+-rw-r--r--   1 root root       889 2010-02-24 20:39 ./source/l/virtuoso-ose/slack-desc
+-rw-r--r--   1 root root  62160156 2011-04-06 20:58 ./source/l/virtuoso-ose/virtuoso-opensource-6.1.3.tar.xz
+-rw-r--r--   1 root root       596 2011-09-10 13:29 ./source/l/virtuoso-ose/virtuoso-opensource-6.1.3.unicode.patch
+-rwxr-xr-x   1 root root      3910 2012-07-04 16:49 ./source/l/virtuoso-ose/virtuoso-ose.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-09 02:25 ./source/l/vte
+-rw-r--r--   1 root root      1246 2011-12-07 16:56 ./source/l/vte/fix_meta_alt_keybinding.patch.gz
+-rw-r--r--   1 root root       710 2007-02-17 03:01 ./source/l/vte/slack-desc
+-rw-r--r--   1 root root    962340 2011-08-28 23:48 ./source/l/vte/vte-0.28.2.tar.xz
+-rwxr-xr-x   1 root root      4390 2012-08-09 02:24 ./source/l/vte/vte.SlackBuild
+-rw-r--r--   1 root root       942 2012-08-09 02:25 ./source/l/vte/vte.escape.cpu.usage.diff.gz
+drwxr-xr-x   2 root root      4096 2010-08-09 21:15 ./source/l/wavpack
+-rw-r--r--   1 root root       841 2008-03-16 05:02 ./source/l/wavpack/slack-desc
+-rw-r--r--   1 root root    394434 2009-12-01 03:50 ./source/l/wavpack/wavpack-4.60.1.tar.bz2
+-rwxr-xr-x   1 root root      3780 2010-08-10 16:46 ./source/l/wavpack/wavpack.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-03-18 23:33 ./source/l/zlib
+-rw-r--r--   1 root root       814 2002-02-15 03:04 ./source/l/zlib/slack-desc
+-rw-r--r--   1 root root    445008 2012-01-29 18:28 ./source/l/zlib/zlib-1.2.6.tar.xz
+-rwxr-xr-x   1 root root      4095 2012-03-18 23:41 ./source/l/zlib/zlib.SlackBuild
+drwxr-xr-x 130 root root      4096 2012-09-11 22:11 ./source/n
+drwxr-xr-x   2 root root      4096 2012-07-22 18:45 ./source/n/ModemManager
+-rw-r--r--   1 root root    492728 2012-03-14 16:00 ./source/n/ModemManager/ModemManager-0.5.2.0.tar.xz
+-rwxr-xr-x   1 root root      3136 2012-04-08 18:06 ./source/n/ModemManager/ModemManager.SlackBuild
+-rw-r--r--   1 root root       832 2012-04-08 17:56 ./source/n/ModemManager/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-13 15:47 ./source/n/NetworkManager
+-rw-r--r--   1 root root       577 2012-08-13 15:47 ./source/n/NetworkManager/11-initialize-nm-remote-settings.patch.gz
+-rw-r--r--   1 root root      1200 2011-10-10 13:32 ./source/n/NetworkManager/55NetworkManager
+-rw-r--r--   1 root root   1885364 2012-03-23 23:07 ./source/n/NetworkManager/NetworkManager-0.9.4.0.tar.xz
+-rwxr-xr-x   1 root root      5251 2012-08-13 15:48 ./source/n/NetworkManager/NetworkManager.SlackBuild
+-rw-r--r--   1 root root       177 2011-10-10 13:32 ./source/n/NetworkManager/NetworkManager.conf.new
+-rw-r--r--   1 root root       951 2011-10-10 13:32 ./source/n/NetworkManager/README
+-rw-r--r--   1 root root       814 2011-10-10 13:32 ./source/n/NetworkManager/doinst.sh
+-rw-r--r--   1 root root      1068 2012-04-08 18:03 ./source/n/NetworkManager/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-09 04:46 ./source/n/alpine
+-rwxr-xr-x   1 root root      6130 2012-07-09 04:44 ./source/n/alpine/alpine.SlackBuild
+-rw-r--r--   1 root root       301 2008-08-07 01:01 ./source/n/alpine/alpine.manpage.diff.gz
+-rw-r--r--   1 root root      2493 2008-08-07 19:00 ./source/n/alpine/alpine.tech-notes.txt.diff.gz
+-rw-r--r--   1 root root       472 2008-08-07 03:57 ./source/n/alpine/doinst.sh.alpine
+-rw-r--r--   1 root root       737 2008-08-07 02:33 ./source/n/alpine/pinepgp-0.18.0-makefile-sed-fix.diff.gz
+-rw-r--r--   1 root root     38103 2002-11-24 23:01 ./source/n/alpine/pinepgp-0.18.0.tar.gz
+-rw-r--r--   1 root root        72 2002-11-24 23:01 ./source/n/alpine/pinepgp-0.18.0.tar.gz.sig
+-rw-r--r--   1 root root       157 2008-08-07 02:50 ./source/n/alpine/pinepgp.pinegpgp.in.diff.gz
+-rw-r--r--   1 root root   4079064 2010-10-02 08:44 ./source/n/alpine/re-alpine-2.02.tar.xz
+-rw-r--r--   1 root root      1102 2008-08-07 00:54 ./source/n/alpine/slack-desc.alpine
+-rw-r--r--   1 root root       749 2008-08-07 00:39 ./source/n/alpine/slack-desc.imapd
+drwxr-xr-x   2 root root      4096 2010-03-05 22:57 ./source/n/autofs
+-rw-r--r--   1 root root       857 2010-03-05 22:37 ./source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz
+-rw-r--r--   1 root root    301327 2009-09-03 10:11 ./source/n/autofs/autofs-5.0.5.tar.bz2
+-rwxr-xr-x   1 root root      4248 2010-03-05 23:01 ./source/n/autofs/autofs.SlackBuild
+-rw-r--r--   1 root root       369 2010-03-05 22:57 ./source/n/autofs/doinst.sh.gz
+-rw-r--r--   1 root root       873 2002-02-27 02:39 ./source/n/autofs/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/biff+comsat
+-rw-r--r--   1 root root       195 2001-02-26 02:06 ./source/n/biff+comsat/biff+comsat-0.17.diff.gz
+-rw-r--r--   1 root root     13700 2000-07-31 02:56 ./source/n/biff+comsat/biff+comsat-0.17.tar.gz
+-rwxr-xr-x   1 root root      2878 2010-08-10 21:33 ./source/n/biff+comsat/biff+comsat.SlackBuild
+-rw-r--r--   1 root root       729 2004-06-21 20:51 ./source/n/biff+comsat/biff+comsat.badutmp.diff.gz
+-rw-r--r--   1 root root      1222 2001-06-03 08:32 ./source/n/biff+comsat/biff+comsat.offset.diff.gz
+-rw-r--r--   1 root root      1148 2007-04-30 01:44 ./source/n/biff+comsat/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-13 19:17 ./source/n/bind
+-rw-r--r--   1 root root      5120 2007-06-08 04:48 ./source/n/bind/3link.sh
+-rw-r--r--   1 root root   7217415 2012-09-12 15:13 ./source/n/bind/bind-9.9.1-P3.tar.gz
+-rw-r--r--   1 root root       490 2012-09-12 15:13 ./source/n/bind/bind-9.9.1-P3.tar.gz.asc
+-rw-r--r--   1 root root       490 2012-09-12 15:13 ./source/n/bind/bind-9.9.1-P3.tar.gz.sha1.asc
+-rw-r--r--   1 root root       490 2012-09-12 15:13 ./source/n/bind/bind-9.9.1-P3.tar.gz.sha256.asc
+-rw-r--r--   1 root root       490 2012-09-12 15:13 ./source/n/bind/bind-9.9.1-P3.tar.gz.sha512.asc
+-rwxr-xr-x   1 root root      5184 2012-09-13 19:17 ./source/n/bind/bind.SlackBuild
+-rw-r--r--   1 root root       280 2006-02-18 19:10 ./source/n/bind/bind.so_bsdcompat.diff.gz
+drwxr-xr-x   2 root root      4096 2011-07-07 23:35 ./source/n/bind/caching-example
+-rw-r--r--   1 root root       195 2001-05-18 02:03 ./source/n/bind/caching-example/localhost.zone
+-rw-r--r--   1 root root       681 2008-04-13 21:47 ./source/n/bind/caching-example/named.conf
+-rw-r--r--   1 root root       433 2011-03-26 06:54 ./source/n/bind/caching-example/named.local
+-rw-r--r--   1 root root      3048 2011-06-09 01:07 ./source/n/bind/caching-example/named.root
+-rw-r--r--   1 root root       514 2009-05-23 08:11 ./source/n/bind/doinst.sh.gz
+-rw-r--r--   1 root root      3378 2010-06-24 17:32 ./source/n/bind/rc.bind
+-rw-r--r--   1 root root       791 2002-02-27 02:45 ./source/n/bind/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-09 17:36 ./source/n/bluez
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/bluez-firmware
+-rw-r--r--   1 root root    262963 2007-04-23 22:58 ./source/n/bluez-firmware/bluez-firmware-1.2.tar.bz2
+-rwxr-xr-x   1 root root      3541 2010-08-10 21:34 ./source/n/bluez-firmware/bluez-firmware.SlackBuild
+-rw-r--r--   1 root root       832 2007-04-23 22:59 ./source/n/bluez-firmware/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/n/bluez-hcidump
+-rw-r--r--   1 root root       836 2012-04-20 19:48 ./source/n/bluez-hcidump/bluez-hcidump-2.4.tar.sign
+-rw-r--r--   1 root root    153204 2012-04-20 19:48 ./source/n/bluez-hcidump/bluez-hcidump-2.4.tar.xz
+-rwxr-xr-x   1 root root      3864 2012-06-25 23:26 ./source/n/bluez-hcidump/bluez-hcidump.SlackBuild
+-rw-r--r--   1 root root       909 2010-05-02 06:03 ./source/n/bluez-hcidump/slack-desc
+-rw-r--r--   1 root root       836 2012-03-06 17:23 ./source/n/bluez/bluez-4.99.tar.sign
+-rw-r--r--   1 root root    859756 2012-03-06 17:23 ./source/n/bluez/bluez-4.99.tar.xz
+-rwxr-xr-x   1 root root      5526 2012-09-09 17:37 ./source/n/bluez/bluez.SlackBuild
+-rw-r--r--   1 root root       234 2012-09-09 17:36 ./source/n/bluez/bluez.enable.audio.socket.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-06 18:43 ./source/n/bluez/config
+-rw-r--r--   1 root root       128 2009-12-30 18:25 ./source/n/bluez/config/bluetooth.modprobe
+-rw-r--r--   1 root root       393 2012-07-08 04:09 ./source/n/bluez/config/rc.bluetooth
+-rw-r--r--   1 root root       381 2012-07-08 03:12 ./source/n/bluez/doinst.sh.gz
+-rw-r--r--   1 root root       803 2010-05-02 05:59 ./source/n/bluez/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/bootp
+-rw-r--r--   1 root root       616 2006-06-09 23:31 ./source/n/bootp/_bootp.tar.gz
+-rwxr-xr-x   1 root root      2801 2010-08-10 21:34 ./source/n/bootp/bootp.SlackBuild
+-rw-r--r--   1 root root     23147 2006-02-17 23:17 ./source/n/bootp/bootp_2.4.3-15.diff.gz
+-rw-r--r--   1 root root     89235 1999-03-18 19:52 ./source/n/bootp/bootp_2.4.3.orig.tar.gz
+-rw-r--r--   1 root root       643 2002-02-27 00:08 ./source/n/bootp/bootptab.gz
+-rw-r--r--   1 root root       876 2008-02-11 03:44 ./source/n/bootp/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-10 21:35 ./source/n/bridge-utils
+-rw-r--r--   1 root root     32657 2008-01-14 14:47 ./source/n/bridge-utils/bridge-utils-1.4.tar.gz
+-rwxr-xr-x   1 root root      3590 2010-08-10 21:36 ./source/n/bridge-utils/bridge-utils.SlackBuild
+-rw-r--r--   1 root root       305 2008-11-29 20:10 ./source/n/bridge-utils/bridge-utils.isbridge.diff.gz
+-rw-r--r--   1 root root      1054 2007-04-29 20:48 ./source/n/bridge-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/bsd-finger
+-rw-r--r--   1 root root       273 2001-02-26 01:21 ./source/n/bsd-finger/bsd-finger-0.17.diff.gz
+-rw-r--r--   1 root root     25521 2000-07-31 02:56 ./source/n/bsd-finger/bsd-finger-0.17.tar.gz
+-rwxr-xr-x   1 root root      2222 2009-05-19 20:05 ./source/n/bsd-finger/bsd-finger.SlackBuild
+-rw-r--r--   1 root root      1075 2007-04-30 01:53 ./source/n/bsd-finger/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-11 21:13 ./source/n/ca-certificates
+-rwxr-xr-x   1 root root      2802 2012-09-11 21:15 ./source/n/ca-certificates/ca-certificates.SlackBuild
+-rw-r--r--   1 root root    287315 2012-06-23 18:02 ./source/n/ca-certificates/ca-certificates_20120623.tar.gz
+-rw-r--r--   1 root root       315 2012-09-11 21:13 ./source/n/ca-certificates/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2011-12-18 05:10 ./source/n/ca-certificates/patches
+-rw-r--r--   1 root root       595 2011-12-18 05:08 ./source/n/ca-certificates/patches/fixup_DESTDIR.diff.gz
+-rw-r--r--   1 root root       376 2011-07-05 22:37 ./source/n/ca-certificates/patches/fixup_update-ca-certificates.diff.gz
+-rw-r--r--   1 root root       265 2011-12-18 05:10 ./source/n/ca-certificates/patches/remove_debconf.diff.gz
+-rw-r--r--   1 root root       128 2012-09-11 21:12 ./source/n/ca-certificates/setup.11.cacerts
+-rw-r--r--   1 root root       895 2009-07-02 03:53 ./source/n/ca-certificates/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 17:06 ./source/n/cifs-utils
+-rw-r--r--   1 root root    288900 2012-05-30 04:18 ./source/n/cifs-utils/cifs-utils-5.5.tar.xz
+-rwxr-xr-x   1 root root      4469 2012-06-27 15:34 ./source/n/cifs-utils/cifs-utils.SlackBuild
+-rw-r--r--   1 root root       702 2012-06-25 16:55 ./source/n/cifs-utils/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch.gz
+-rw-r--r--   1 root root      1067 2012-06-20 17:51 ./source/n/cifs-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2010-05-03 01:18 ./source/n/crda
+-rw-r--r--   1 root root     21666 2010-05-03 01:18 ./source/n/crda/crda-1.1.1.tar.bz2
+-rwxr-xr-x   1 root root      3643 2010-05-03 01:19 ./source/n/crda/crda.SlackBuild
+-rw-r--r--   1 root root       380 2009-02-23 01:33 ./source/n/crda/get_regdb.sh
+-rw-r--r--   1 root root       870 2009-03-09 05:07 ./source/n/crda/slack-desc
+-rw-r--r--   1 root root     68146 2010-05-03 01:17 ./source/n/crda/wireless-regdb-git_20100502.tar.bz2
+drwxr-xr-x   2 root root      4096 2012-08-17 19:58 ./source/n/curl
+-rwxr-xr-x   1 root root        86 2012-04-08 00:28 ./source/n/curl/cacert-fetch.sh
+-rw-r--r--   1 root root    115373 2012-05-02 03:12 ./source/n/curl/cacert.pem.bz2
+-rw-r--r--   1 root root   2476068 2012-07-27 21:12 ./source/n/curl/curl-7.27.0.tar.bz2
+-rw-r--r--   1 root root       294 2012-08-17 19:55 ./source/n/curl/curl-7.27.0_curl-config_syntax_fix.diff.gz
+-rwxr-xr-x   1 root root      4278 2012-08-17 19:58 ./source/n/curl/curl.SlackBuild
+-rw-r--r--   1 root root      1010 2008-02-11 03:44 ./source/n/curl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 18:44 ./source/n/cyrus-sasl
+-rw-r--r--   1 root root    906552 2009-05-14 13:48 ./source/n/cyrus-sasl/cyrus-sasl-2.1.23.tar.xz
+-rwxr-xr-x   1 root root      4365 2012-07-04 01:57 ./source/n/cyrus-sasl/cyrus-sasl.SlackBuild
+-rw-r--r--   1 root root       288 2012-06-28 17:41 ./source/n/cyrus-sasl/cyrus-sasl.bad_elif.diff.gz
+-rw-r--r--   1 root root       275 2005-07-24 22:43 ./source/n/cyrus-sasl/doinst.sh.gz
+-rw-r--r--   1 root root       580 2005-07-25 00:10 ./source/n/cyrus-sasl/rc.saslauthd.gz
+-rw-r--r--   1 root root       836 2005-04-18 23:31 ./source/n/cyrus-sasl/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-14 18:08 ./source/n/dhcp
+-rw-r--r--   1 root root       337 2010-03-03 15:15 ./source/n/dhcp/dhclient-script.PATH.diff.gz
+-rw-r--r--   1 root root   8190209 2012-09-12 15:45 ./source/n/dhcp/dhcp-4.2.4-P2.tar.gz
+-rw-r--r--   1 root root       488 2012-09-12 15:45 ./source/n/dhcp/dhcp-4.2.4-P2.tar.gz.asc
+-rw-r--r--   1 root root       488 2012-09-12 15:45 ./source/n/dhcp/dhcp-4.2.4-P2.tar.gz.sha1.asc
+-rw-r--r--   1 root root       488 2012-09-12 15:45 ./source/n/dhcp/dhcp-4.2.4-P2.tar.gz.sha256.asc
+-rw-r--r--   1 root root       488 2012-09-12 15:45 ./source/n/dhcp/dhcp-4.2.4-P2.tar.gz.sha512.asc
+-rwxr-xr-x   1 root root      1667 2011-04-06 19:13 ./source/n/dhcp/dhcp-remove-bind-tarball.sh
+-rwxr-xr-x   1 root root      5312 2012-09-14 18:09 ./source/n/dhcp/dhcp.SlackBuild
+-rw-r--r--   1 root root       309 2011-03-24 13:39 ./source/n/dhcp/doinst.sh.gz
+-rw-r--r--   1 root root      1099 2002-02-27 02:14 ./source/n/dhcp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-09 00:28 ./source/n/dhcpcd
+-rw-r--r--   1 root root       763 2012-07-08 23:28 ./source/n/dhcpcd/COPYRIGHT.gz
+-rw-r--r--   1 root root       622 2012-05-24 02:37 ./source/n/dhcpcd/define-SERVICEstuff-for-Slackware.patch.gz
+-rw-r--r--   1 root root     78185 2012-03-28 10:26 ./source/n/dhcpcd/dhcpcd-5.5.6.tar.bz2
+-rwxr-xr-x   1 root root      4236 2012-06-25 22:55 ./source/n/dhcpcd/dhcpcd.SlackBuild
+-rw-r--r--   1 root root       265 2009-07-24 16:30 ./source/n/dhcpcd/doinst.sh.gz
+-rw-r--r--   1 root root       900 2008-04-10 21:01 ./source/n/dhcpcd/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-07 20:19 ./source/n/dirmngr
+-rw-r--r--   1 root root    481320 2010-06-14 07:45 ./source/n/dirmngr/dirmngr-1.1.0.tar.xz
+-rwxr-xr-x   1 root root      3625 2011-01-14 03:19 ./source/n/dirmngr/dirmngr.SlackBuild
+-rw-r--r--   1 root root       952 2007-03-15 20:48 ./source/n/dirmngr/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-16 05:33 ./source/n/dnsmasq
+-rw-r--r--   1 root root    334524 2011-02-18 18:11 ./source/n/dnsmasq/dnsmasq-2.57.tar.xz
+-rwxr-xr-x   1 root root      3574 2010-02-11 21:46 ./source/n/dnsmasq/dnsmasq.SlackBuild
+-rw-r--r--   1 root root       543 2010-01-22 21:33 ./source/n/dnsmasq/dnsmasq.leasedir.diff.gz
+-rw-r--r--   1 root root       376 2010-01-22 21:37 ./source/n/dnsmasq/doinst.sh.gz
+-rw-r--r--   1 root root       265 2005-10-16 20:02 ./source/n/dnsmasq/rc.dnsmasq.gz
+-rw-r--r--   1 root root       854 2005-10-16 20:03 ./source/n/dnsmasq/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/n/elm
+-rw-r--r--   1 root root      4400 2009-08-13 19:04 ./source/n/elm/config.sh
+-rwxr-xr-x   1 root root      2872 2010-08-11 02:48 ./source/n/elm/elm.SlackBuild
+-rw-r--r--   1 root root    481431 2005-08-18 13:25 ./source/n/elm/elm2.5.8.tar.bz2
+-rw-r--r--   1 root root       678 2002-03-05 02:32 ./source/n/elm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 22:19 ./source/n/epic5
+-rw-r--r--   1 root root    249636 2005-03-16 01:15 ./source/n/epic5/epic-help-current.tar.xz
+-rw-r--r--   1 root root    715284 2012-05-11 01:42 ./source/n/epic5/epic5-1.1.3.tar.xz
+-rwxr-xr-x   1 root root      3351 2012-07-04 22:19 ./source/n/epic5/epic5.SlackBuild
+-rw-r--r--   1 root root       777 2010-05-17 18:46 ./source/n/epic5/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-25 05:52 ./source/n/ethtool
+-rw-r--r--   1 root root    144548 2010-11-16 20:04 ./source/n/ethtool/ethtool-2.6.36.tar.xz
+-rwxr-xr-x   1 root root      2558 2011-03-25 05:54 ./source/n/ethtool/ethtool.SlackBuild
+-rw-r--r--   1 root root       899 2007-04-29 22:26 ./source/n/ethtool/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 20:46 ./source/n/fetchmail
+-rw-r--r--   1 root root   1254704 2011-08-21 13:44 ./source/n/fetchmail/fetchmail-6.3.21.tar.xz
+-rw-r--r--   1 root root       198 2011-08-21 13:44 ./source/n/fetchmail/fetchmail-6.3.21.tar.xz.asc
+-rwxr-xr-x   1 root root      3287 2012-07-04 22:22 ./source/n/fetchmail/fetchmail.SlackBuild
+-rw-r--r--   1 root root       286 2011-06-17 19:12 ./source/n/fetchmail/fetchmail.url
+-rw-r--r--   1 root root      1067 2007-05-07 03:49 ./source/n/fetchmail/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-23 21:15 ./source/n/getmail
+-rw-r--r--   1 root root    164508 2012-06-21 21:02 ./source/n/getmail/getmail-4.30.1.tar.gz
+-rwxr-xr-x   1 root root      2052 2010-05-03 01:46 ./source/n/getmail/getmail.SlackBuild
+-rw-r--r--   1 root root       821 2003-09-10 04:59 ./source/n/getmail/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:33 ./source/n/gnupg
+-rw-r--r--   1 root root   3584133 2012-01-30 14:28 ./source/n/gnupg/gnupg-1.4.12.tar.bz2
+-rwxr-xr-x   1 root root      3402 2012-07-08 16:33 ./source/n/gnupg/gnupg.SlackBuild
+-rw-r--r--   1 root root       827 2003-02-25 23:37 ./source/n/gnupg/slack-desc.gnupg
+drwxr-xr-x   2 root root      4096 2012-07-08 16:30 ./source/n/gnupg2
+-rw-r--r--   1 root root   2834412 2012-03-27 08:17 ./source/n/gnupg2/gnupg-2.0.19.tar.xz
+-rwxr-xr-x   1 root root      5523 2012-06-25 22:55 ./source/n/gnupg2/gnupg2.SlackBuild
+-rw-r--r--   1 root root      1058 2008-02-11 03:44 ./source/n/gnupg2/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-04 16:36 ./source/n/gnutls
+-rw-r--r--   1 root root   4653604 2012-09-02 18:34 ./source/n/gnutls/gnutls-3.0.23.tar.xz
+-rw-r--r--   1 root root       490 2012-09-02 18:34 ./source/n/gnutls/gnutls-3.0.23.tar.xz.sig
+-rwxr-xr-x   1 root root      4141 2012-06-25 23:37 ./source/n/gnutls/gnutls.SlackBuild
+-rw-r--r--   1 root root       950 2007-03-16 01:33 ./source/n/gnutls/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-29 15:59 ./source/n/gpa
+-rw-r--r--   1 root root       232 2012-07-18 19:35 ./source/n/gpa/doinst.sh.gz
+-rw-r--r--   1 root root    569180 2012-08-08 04:26 ./source/n/gpa/gpa-0.9.3.tar.xz
+-rwxr-xr-x   1 root root      3774 2012-08-29 17:17 ./source/n/gpa/gpa.SlackBuild
+-rw-r--r--   1 root root       741 2007-03-15 20:46 ./source/n/gpa/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:27 ./source/n/gpgme
+-rw-r--r--   1 root root    867738 2012-05-02 08:33 ./source/n/gpgme/gpgme-1.3.2.tar.bz2
+-rw-r--r--   1 root root       287 2012-05-02 13:22 ./source/n/gpgme/gpgme-1.3.2.tar.bz2.sig
+-rwxr-xr-x   1 root root      3411 2012-06-25 23:41 ./source/n/gpgme/gpgme.SlackBuild
+-rw-r--r--   1 root root       995 2007-03-15 20:46 ./source/n/gpgme/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/htdig
+-rw-r--r--   1 root root       274 2007-04-07 22:58 ./source/n/htdig/doinst.sh.gz
+-rw-r--r--   1 root root      3347 2007-04-07 22:30 ./source/n/htdig/htdig-3.2.0b6.diff.gz
+-rw-r--r--   1 root root   2498246 2004-07-13 14:21 ./source/n/htdig/htdig-3.2.0b6.tar.bz2
+-rwxr-xr-x   1 root root      4395 2012-07-04 16:46 ./source/n/htdig/htdig.SlackBuild
+-rw-r--r--   1 root root       288 2007-05-02 18:02 ./source/n/htdig/htdig.conf.diff.gz
+-rw-r--r--   1 root root       891 2012-07-22 17:14 ./source/n/htdig/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-22 17:18 ./source/n/httpd
+-rw-r--r--   1 root root       921 2012-05-24 19:42 ./source/n/httpd/doinst.sh.gz
+-rw-r--r--   1 root root   4559279 2012-08-20 13:22 ./source/n/httpd/httpd-2.4.3.tar.bz2
+-rw-r--r--   1 root root       825 2012-08-20 13:22 ./source/n/httpd/httpd-2.4.3.tar.bz2.asc
+-rwxr-xr-x   1 root root      8088 2012-08-22 17:26 ./source/n/httpd/httpd.SlackBuild
+-rw-r--r--   1 root root       260 2012-04-13 02:17 ./source/n/httpd/httpd.runasapache.diff.gz
+-rw-r--r--   1 root root       110 2012-08-22 17:14 ./source/n/httpd/httpd.url
+-rw-r--r--   1 root root       171 2010-11-09 20:22 ./source/n/httpd/logrotate.httpd
+-rw-r--r--   1 root root      1061 2012-05-16 20:56 ./source/n/httpd/rc.httpd
+-rw-r--r--   1 root root       970 2007-05-18 04:13 ./source/n/httpd/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/icmpinfo
+-rw-r--r--   1 root root      2263 2007-04-29 20:13 ./source/n/icmpinfo/icmpinfo-1.11.diff.gz
+-rw-r--r--   1 root root     11873 1995-08-23 23:00 ./source/n/icmpinfo/icmpinfo-1.11.tar.gz
+-rwxr-xr-x   1 root root      2481 2010-08-12 00:46 ./source/n/icmpinfo/icmpinfo.SlackBuild
+-rw-r--r--   1 root root       826 2007-04-29 20:21 ./source/n/icmpinfo/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-25 21:45 ./source/n/idnkit
+-rw-r--r--   1 root root    297016 2010-04-14 08:17 ./source/n/idnkit/idnkit-1.0-src.tar.xz
+-rwxr-xr-x   1 root root      3996 2011-03-25 21:45 ./source/n/idnkit/idnkit.SlackBuild
+-rw-r--r--   1 root root       898 2011-03-25 21:23 ./source/n/idnkit/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-01 21:47 ./source/n/iftop
+-rw-r--r--   1 root root    133168 2011-10-04 20:40 ./source/n/iftop/iftop-1.0pre2.tar.xz
+-rwxr-xr-x   1 root root      3786 2012-06-01 21:49 ./source/n/iftop/iftop.SlackBuild
+-rw-r--r--   1 root root       870 2012-06-01 21:47 ./source/n/iftop/slack-desc
+lrwxrwxrwx   1 root root         6 2010-08-12 00:48 ./source/n/imapd -> alpine
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/inetd
+-rw-r--r--   1 root root      4876 2007-06-30 20:02 ./source/n/inetd/_inetd.tar.gz
+-rw-r--r--   1 root root      6436 2001-02-07 01:19 ./source/n/inetd/inetd-OpenBSD-1.79.diff.gz
+-rw-r--r--   1 root root     19053 2001-02-06 20:48 ./source/n/inetd/inetd-OpenBSD-1.79.tar.gz
+-rwxr-xr-x   1 root root      2409 2010-08-12 00:51 ./source/n/inetd/inetd.SlackBuild
+-rw-r--r--   1 root root       889 2003-09-06 23:32 ./source/n/inetd/inetd.loopingdos.diff.gz
+-rw-r--r--   1 root root       910 2002-03-22 02:34 ./source/n/inetd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/n/iproute2
+-rw-r--r--   1 root root       309 2011-07-26 03:35 ./source/n/iproute2/doinst.sh.gz
+-rw-r--r--   1 root root       295 2012-05-24 00:16 ./source/n/iproute2/fixup-for-x86_64.diff.gz
+-rw-r--r--   1 root root    382092 2012-05-21 21:28 ./source/n/iproute2/iproute2-3.4.0.tar.xz
+-rwxr-xr-x   1 root root      4592 2012-07-29 16:17 ./source/n/iproute2/iproute2.SlackBuild
+-rw-r--r--   1 root root       937 2004-06-12 22:12 ./source/n/iproute2/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/n/iptables
+-rw-r--r--   1 root root    431792 2012-05-26 16:47 ./source/n/iptables/iptables-1.4.14.tar.xz
+-rwxr-xr-x   1 root root      3627 2012-06-25 22:55 ./source/n/iptables/iptables.SlackBuild
+-rw-r--r--   1 root root      1129 2006-09-03 06:14 ./source/n/iptables/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-11 03:47 ./source/n/iptraf-ng
+-rw-r--r--   1 root root    574784 2010-03-24 13:52 ./source/n/iptraf-ng/iptraf-ng-1.0.2.tar.xz
+-rwxr-xr-x   1 root root      3894 2011-03-12 18:47 ./source/n/iptraf-ng/iptraf-ng.SlackBuild
+-rw-r--r--   1 root root      1048 2011-03-11 03:13 ./source/n/iptraf-ng/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-25 05:49 ./source/n/iputils
+-rw-r--r--   1 root root     94386 2010-10-06 12:00 ./source/n/iputils/iputils-s20101006.tar.bz2
+-rwxr-xr-x   1 root root      3467 2012-07-18 16:59 ./source/n/iputils/iputils.SlackBuild
+-rw-r--r--   1 root root       881 2007-04-30 00:45 ./source/n/iputils/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/ipw2100-fw
+-rw-r--r--   1 root root    177519 2008-03-09 04:43 ./source/n/ipw2100-fw/ipw2100-fw-1.3.tar.bz2
+-rwxr-xr-x   1 root root      2935 2009-05-19 20:05 ./source/n/ipw2100-fw/ipw2100-fw.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-05-03 03:32 ./source/n/ipw2200-fw
+-rw-r--r--   1 root root    118152 2010-05-03 02:47 ./source/n/ipw2200-fw/ipw2200-fw-3.1.tar.xz
+-rwxr-xr-x   1 root root      2807 2010-05-03 03:32 ./source/n/ipw2200-fw/ipw2200-fw.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-04-22 03:45 ./source/n/irssi
+-rw-r--r--   1 root root       264 2009-07-29 00:34 ./source/n/irssi/doinst.sh.gz
+-rw-r--r--   1 root root    948847 2010-04-22 03:29 ./source/n/irssi/irssi-0.8.15.tar.bz2
+-rw-r--r--   1 root root        72 2010-04-22 03:29 ./source/n/irssi/irssi-0.8.15.tar.bz2.sig
+-rwxr-xr-x   1 root root      4516 2012-07-04 17:19 ./source/n/irssi/irssi.SlackBuild
+-rw-r--r--   1 root root       371 2009-10-12 20:24 ./source/n/irssi/irssi.manpage_fix.diff.gz
+-rw-r--r--   1 root root       402 2010-04-22 03:39 ./source/n/irssi/irssi.ssl_proxy.diff.gz
+-rw-r--r--   1 root root       789 2003-12-13 20:28 ./source/n/irssi/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 21:41 ./source/n/iw
+-rw-r--r--   1 root root     63549 2012-07-08 21:41 ./source/n/iw/iw-3.5.tar.bz2
+-rwxr-xr-x   1 root root      3310 2012-07-08 21:50 ./source/n/iw/iw.SlackBuild
+-rw-r--r--   1 root root       129 2011-08-22 03:09 ./source/n/iw/iw.info
+-rw-r--r--   1 root root       883 2009-04-01 01:20 ./source/n/iw/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-03 21:51 ./source/n/lftp
+-rw-r--r--   1 root root       263 2009-05-31 06:11 ./source/n/lftp/doinst.sh.gz
+-rw-r--r--   1 root root   1407936 2012-07-03 13:36 ./source/n/lftp/lftp-4.3.8.tar.xz
+-rw-r--r--   1 root root       190 2012-07-03 13:38 ./source/n/lftp/lftp-4.3.8.tar.xz.asc
+-rwxr-xr-x   1 root root      3788 2012-04-25 21:36 ./source/n/lftp/lftp.SlackBuild
+-rw-r--r--   1 root root      1037 2002-04-06 20:20 ./source/n/lftp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:24 ./source/n/libassuan
+-rw-r--r--   1 root root    529149 2011-12-20 09:57 ./source/n/libassuan/libassuan-2.0.3.tar.bz2
+-rw-r--r--   1 root root       287 2011-12-20 09:57 ./source/n/libassuan/libassuan-2.0.3.tar.bz2.sig
+-rwxr-xr-x   1 root root      3358 2012-06-25 22:55 ./source/n/libassuan/libassuan.SlackBuild
+-rw-r--r--   1 root root       712 2007-03-15 20:46 ./source/n/libassuan/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/n/libgcrypt
+-rw-r--r--   1 root root   1433506 2011-06-29 09:01 ./source/n/libgcrypt/libgcrypt-1.5.0.tar.bz2
+-rw-r--r--   1 root root       287 2011-06-29 09:01 ./source/n/libgcrypt/libgcrypt-1.5.0.tar.bz2.sig
+-rwxr-xr-x   1 root root      3805 2012-07-08 16:25 ./source/n/libgcrypt/libgcrypt.SlackBuild
+-rw-r--r--   1 root root       705 2007-03-15 20:47 ./source/n/libgcrypt/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/n/libgpg-error
+-rw-r--r--   1 root root    439213 2010-10-26 09:18 ./source/n/libgpg-error/libgpg-error-1.10.tar.bz2
+-rw-r--r--   1 root root       158 2010-10-26 09:18 ./source/n/libgpg-error/libgpg-error-1.10.tar.bz2.sig
+-rwxr-xr-x   1 root root      3691 2012-06-25 22:55 ./source/n/libgpg-error/libgpg-error.SlackBuild
+-rw-r--r--   1 root root       856 2007-03-15 20:47 ./source/n/libgpg-error/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-07 20:16 ./source/n/libksba
+-rw-r--r--   1 root root    588323 2011-03-01 11:47 ./source/n/libksba/libksba-1.2.0.tar.bz2
+-rw-r--r--   1 root root       287 2011-03-01 11:47 ./source/n/libksba/libksba-1.2.0.tar.bz2.sig
+-rwxr-xr-x   1 root root      3484 2010-03-06 00:33 ./source/n/libksba/libksba.SlackBuild
+-rw-r--r--   1 root root       790 2007-03-15 20:47 ./source/n/libksba/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 16:26 ./source/n/links
+-rw-r--r--   1 root root   3688124 2012-06-26 01:03 ./source/n/links/links-2.7.tar.xz
+-rwxr-xr-x   1 root root      3557 2012-07-04 16:26 ./source/n/links/links.SlackBuild
+-rw-r--r--   1 root root       902 2003-08-19 20:03 ./source/n/links/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-12 01:54 ./source/n/lynx
+-rwxr-xr-x   1 root root      4463 2012-07-04 16:30 ./source/n/lynx/lynx.SlackBuild
+-rw-r--r--   1 root root       355 2009-12-03 21:36 ./source/n/lynx/lynx.cfg.diff.gz
+-rw-r--r--   1 root root       573 2009-12-03 21:59 ./source/n/lynx/lynx.path.diff.gz
+-rw-r--r--   1 root root   2090248 2009-12-02 21:53 ./source/n/lynx/lynx2.8.7.tar.xz
+-rw-r--r--   1 root root       953 2002-02-27 06:50 ./source/n/lynx/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 17:21 ./source/n/mailx
+-rw-r--r--   1 root root       281 2006-09-20 05:36 ./source/n/mailx/doinst.sh.gz
+-rw-r--r--   1 root root    249292 2010-10-26 12:55 ./source/n/mailx/mailx-12.5.tar.xz
+-rwxr-xr-x   1 root root      4044 2012-07-04 17:21 ./source/n/mailx/mailx.SlackBuild
+-rw-r--r--   1 root root      1023 2008-04-11 02:52 ./source/n/mailx/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-14 03:39 ./source/n/mcabber
+-rw-r--r--   1 root root    554682 2010-12-01 20:52 ./source/n/mcabber/mcabber-0.10.1.tar.bz2
+-rwxr-xr-x   1 root root      3928 2010-04-22 19:23 ./source/n/mcabber/mcabber.SlackBuild
+-rw-r--r--   1 root root       876 2007-06-14 00:35 ./source/n/mcabber/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-12 01:05 ./source/n/metamail
+-rw-r--r--   1 root root    125480 1994-02-18 21:07 ./source/n/metamail/metamail-2.7.tar.xz
+-rwxr-xr-x   1 root root      4578 2010-08-12 01:03 ./source/n/metamail/metamail.SlackBuild
+-rw-r--r--   1 root root     20532 2009-04-23 21:04 ./source/n/metamail/metamail.automake.diff.xz
+-rw-r--r--   1 root root       284 2010-08-12 01:05 ./source/n/metamail/metamail.uue.getline.diff.gz
+-rw-r--r--   1 root root    202588 2008-03-08 23:47 ./source/n/metamail/metamail_2.7-54.diff.xz
+-rw-r--r--   1 root root       927 2002-03-23 23:50 ./source/n/metamail/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-21 13:52 ./source/n/mobile-broadband-provider-info
+-rw-r--r--   1 root root       105 2011-10-10 19:38 ./source/n/mobile-broadband-provider-info/README
+-rw-r--r--   1 root root     73600 2012-06-14 09:56 ./source/n/mobile-broadband-provider-info/mobile-broadband-provider-info-20120614.tar.xz
+-rwxr-xr-x   1 root root      3731 2012-06-21 13:53 ./source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.SlackBuild
+-rw-r--r--   1 root root       225 2012-04-14 20:25 ./source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.pc.diff.gz
+-rw-r--r--   1 root root      1074 2012-04-08 18:05 ./source/n/mobile-broadband-provider-info/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-01 20:10 ./source/n/mtr
+-rw-r--r--   1 root root    211764 2011-12-02 14:21 ./source/n/mtr/mtr-0.82.tar.xz
+-rwxr-xr-x   1 root root      3432 2012-03-01 22:28 ./source/n/mtr/mtr.SlackBuild
+-rw-r--r--   1 root root       779 2007-06-04 22:06 ./source/n/mtr/slack-desc
+drwxr-xr-x   2 root root      4096 2010-10-25 17:54 ./source/n/mutt
+-rw-r--r--   1 root root       264 2002-06-01 05:12 ./source/n/mutt/doinst.sh.gz
+-rw-r--r--   1 root root   1810848 2010-09-15 17:12 ./source/n/mutt/mutt-1.5.21.tar.xz
+-rwxr-xr-x   1 root root      4096 2012-07-04 16:32 ./source/n/mutt/mutt.SlackBuild
+-rw-r--r--   1 root root       466 2010-10-25 17:51 ./source/n/mutt/mutt.gpgme.diff.gz
+-rw-r--r--   1 root root       866 2008-02-11 03:44 ./source/n/mutt/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/nc
+-rw-r--r--   1 root root     10439 2002-03-14 16:47 ./source/n/nc/nc-110-21.diff.gz
+-rwxr-xr-x   1 root root      2668 2010-08-12 15:00 ./source/n/nc/nc.SlackBuild
+-rw-r--r--   1 root root       641 2002-05-28 21:39 ./source/n/nc/nc.diff.gz
+-rw-r--r--   1 root root     75267 2002-05-28 18:18 ./source/n/nc/nc110.tgz
+-rw-r--r--   1 root root      1081 2002-05-28 21:54 ./source/n/nc/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-21 01:40 ./source/n/ncftp
+-rw-r--r--   1 root root    454388 2011-01-18 03:52 ./source/n/ncftp/ncftp-3.2.5-src.tar.bz2
+-rwxr-xr-x   1 root root      3575 2010-05-03 05:25 ./source/n/ncftp/ncftp.SlackBuild
+-rw-r--r--   1 root root       793 2008-02-11 03:44 ./source/n/ncftp/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-19 22:11 ./source/n/net-snmp
+-rw-r--r--   1 root root       344 2007-06-19 03:37 ./source/n/net-snmp/doinst.sh.gz
+-rw-r--r--   1 root root   3499040 2011-01-03 23:45 ./source/n/net-snmp/net-snmp-5.6.1.tar.xz
+-rwxr-xr-x   1 root root      5506 2012-07-17 17:40 ./source/n/net-snmp/net-snmp.SlackBuild
+-rw-r--r--   1 root root       341 2010-12-06 13:48 ./source/n/net-snmp/net-snmp.net-snmp-create-v3-user.etc.snmpd.conf.diff.gz
+-rw-r--r--   1 root root       895 2007-06-19 03:36 ./source/n/net-snmp/rc.snmpd
+-rw-r--r--   1 root root       910 2012-07-22 17:14 ./source/n/net-snmp/slack-desc
+-rw-r--r--   1 root root      4909 2007-04-16 18:39 ./source/n/net-snmp/snmpd.conf.gz
+drwxr-xr-x   2 root root      4096 2012-07-26 21:08 ./source/n/net-tools
+-rw-r--r--   1 root root      1334 2007-04-29 20:01 ./source/n/net-tools/ipmask.8
+-rw-r--r--   1 root root      2216 1994-08-15 19:16 ./source/n/net-tools/ipmask.c
+-rw-r--r--   1 root root    195768 2012-07-26 20:46 ./source/n/net-tools/net-tools-1.60.20120726git.tar.xz
+-rwxr-xr-x   1 root root      4098 2012-07-27 15:58 ./source/n/net-tools/net-tools.SlackBuild
+-rw-r--r--   1 root root       629 2012-07-26 20:54 ./source/n/net-tools/net-tools.config.h.gz
+-rw-r--r--   1 root root       126 2012-07-26 21:02 ./source/n/net-tools/net-tools.url
+-rw-r--r--   1 root root       909 2007-04-29 19:40 ./source/n/net-tools/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-12 05:49 ./source/n/netatalk
+-rw-r--r--   1 root root         0 2003-02-02 04:37 ./source/n/netatalk/afppasswd
+-rw-r--r--   1 root root       417 2012-09-12 05:47 ./source/n/netatalk/doinst.sh.gz
+-rw-r--r--   1 root root   1007700 2012-05-22 12:01 ./source/n/netatalk/netatalk-2.2.3.tar.xz
+-rwxr-xr-x   1 root root      4307 2012-09-12 05:48 ./source/n/netatalk/netatalk.SlackBuild
+-rw-r--r--   1 root root       292 2004-10-28 18:43 ./source/n/netatalk/netatalk.etc2ps.diff.gz
+-rw-r--r--   1 root root      2980 2012-09-11 22:27 ./source/n/netatalk/rc.atalk.new
+-rw-r--r--   1 root root      1040 2003-02-02 00:09 ./source/n/netatalk/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netdate
+-rwxr-xr-x   1 root root      2421 2010-08-12 15:07 ./source/n/netdate/netdate.SlackBuild
+-rw-r--r--   1 root root      3766 1999-08-04 23:51 ./source/n/netdate/netdate.diff.gz
+-rw-r--r--   1 root root       164 2001-02-26 02:37 ./source/n/netdate/netdate.diff2.gz
+-rw-r--r--   1 root root      6755 1996-08-15 02:58 ./source/n/netdate/netdate.tar.gz
+-rw-r--r--   1 root root      1107 2007-04-30 02:16 ./source/n/netdate/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/n/netkit-bootparamd
+-rw-r--r--   1 root root     13934 2000-07-31 02:57 ./source/n/netkit-bootparamd/netkit-bootparamd-0.17.tar.gz
+-rwxr-xr-x   1 root root      2442 2010-08-12 15:07 ./source/n/netkit-bootparamd/netkit-bootparamd.SlackBuild
+-rw-r--r--   1 root root       986 2007-04-30 01:02 ./source/n/netkit-bootparamd/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/n/netkit-ftp
+-rw-r--r--   1 root root     53934 2000-07-31 03:01 ./source/n/netkit-ftp/netkit-ftp-0.17.tar.gz
+-rwxr-xr-x   1 root root      2281 2010-08-12 15:08 ./source/n/netkit-ftp/netkit-ftp.SlackBuild
+-rw-r--r--   1 root root       905 2007-04-30 01:21 ./source/n/netkit-ftp/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/n/netkit-ntalk
+-rw-r--r--   1 root root       842 2000-06-08 02:04 ./source/n/netkit-ntalk/netkit-ntalk-0.11.diff.gz
+-rw-r--r--   1 root root     30632 2000-06-08 02:04 ./source/n/netkit-ntalk/netkit-ntalk-0.11.tar.gz
+-rw-r--r--   1 root root       230 2001-02-26 02:46 ./source/n/netkit-ntalk/netkit-ntalk-0.17.diff.gz
+-rw-r--r--   1 root root     37396 2000-07-31 03:02 ./source/n/netkit-ntalk/netkit-ntalk-0.17.tar.gz
+-rwxr-xr-x   1 root root      3177 2010-08-12 15:08 ./source/n/netkit-ntalk/netkit-ntalk.SlackBuild
+-rw-r--r--   1 root root       551 2004-11-04 03:51 ./source/n/netkit-ntalk/ntalk-0.17-slackware-alt-talkd.patch.gz
+-rw-r--r--   1 root root       941 2007-05-07 04:09 ./source/n/netkit-ntalk/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-routed
+-rw-r--r--   1 root root       305 2001-02-26 02:15 ./source/n/netkit-routed/netkit-routed-0.17.diff.gz
+-rw-r--r--   1 root root     36435 2000-07-31 03:02 ./source/n/netkit-routed/netkit-routed-0.17.tar.gz
+-rwxr-xr-x   1 root root      2665 2010-08-12 15:09 ./source/n/netkit-routed/netkit-routed.SlackBuild
+-rw-r--r--   1 root root      8075 2000-12-26 15:14 ./source/n/netkit-routed/routed.18.candidate.final.patch.gz
+-rw-r--r--   1 root root      1100 2007-04-29 23:36 ./source/n/netkit-routed/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-rsh
+-rw-r--r--   1 root root     58268 2000-07-31 03:02 ./source/n/netkit-rsh/netkit-rsh-0.17.tar.gz
+-rwxr-xr-x   1 root root      3079 2010-08-12 15:09 ./source/n/netkit-rsh/netkit-rsh.SlackBuild
+-rw-r--r--   1 root root       884 2010-08-12 15:09 ./source/n/netkit-rsh/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-rusers
+-rw-r--r--   1 root root       221 2001-02-26 02:17 ./source/n/netkit-rusers/netkit-rusers-0.17.diff.gz
+-rw-r--r--   1 root root     22063 2000-07-31 03:03 ./source/n/netkit-rusers/netkit-rusers-0.17.tar.gz
+-rwxr-xr-x   1 root root      2648 2010-08-12 15:10 ./source/n/netkit-rusers/netkit-rusers.SlackBuild
+-rw-r--r--   1 root root      1160 2007-04-30 02:04 ./source/n/netkit-rusers/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-rwall
+-rw-r--r--   1 root root     11861 2000-07-31 03:03 ./source/n/netkit-rwall/netkit-rwall-0.17.tar.gz
+-rwxr-xr-x   1 root root      2468 2010-08-12 15:10 ./source/n/netkit-rwall/netkit-rwall.SlackBuild
+-rw-r--r--   1 root root       925 2007-04-30 02:12 ./source/n/netkit-rwall/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-rwho
+-rw-r--r--   1 root root       159 2001-02-26 02:19 ./source/n/netkit-rwho/netkit-rwho-0.17.diff.gz
+-rw-r--r--   1 root root     20610 2000-07-31 03:03 ./source/n/netkit-rwho/netkit-rwho-0.17.tar.gz
+-rwxr-xr-x   1 root root      2730 2010-08-12 15:11 ./source/n/netkit-rwho/netkit-rwho.SlackBuild
+-rw-r--r--   1 root root       225 2008-12-14 22:21 ./source/n/netkit-rwho/rwhod_getloadavg.diff.gz
+-rw-r--r--   1 root root      1153 2007-04-30 02:42 ./source/n/netkit-rwho/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netkit-timed
+-rw-r--r--   1 root root       243 2001-01-07 21:30 ./source/n/netkit-timed/netkit-timed-0.17.diff.gz
+-rw-r--r--   1 root root     48655 2000-07-31 03:04 ./source/n/netkit-timed/netkit-timed-0.17.tar.gz
+-rwxr-xr-x   1 root root      2530 2010-08-12 15:11 ./source/n/netkit-timed/netkit-timed.SlackBuild
+-rw-r--r--   1 root root       870 2007-04-30 02:22 ./source/n/netkit-timed/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 21:29 ./source/n/netpipes
+-rw-r--r--   1 root root       365 1999-02-07 16:28 ./source/n/netpipes/_netpipes.tar.gz
+-rw-r--r--   1 root root     75276 1999-01-30 17:09 ./source/n/netpipes/netpipes-4.2-export.tar.gz
+-rwxr-xr-x   1 root root      2509 2010-08-12 15:13 ./source/n/netpipes/netpipes.SlackBuild
+-rw-r--r--   1 root root      1019 2008-02-11 03:44 ./source/n/netpipes/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:38 ./source/n/nettle
+-rw-r--r--   1 root root    863744 2012-07-07 13:37 ./source/n/nettle/nettle-2.5.tar.xz
+-rwxr-xr-x   1 root root      3897 2012-07-08 16:42 ./source/n/nettle/nettle.SlackBuild
+-rw-r--r--   1 root root       897 2011-08-22 04:11 ./source/n/nettle/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/n/netwatch
+-rw-r--r--   1 root root    187936 2009-03-04 08:01 ./source/n/netwatch/netwatch-1.3.0-1.tar.gz
+-rwxr-xr-x   1 root root      3403 2010-08-12 15:14 ./source/n/netwatch/netwatch.SlackBuild
+-rw-r--r--   1 root root       491 2009-03-04 08:01 ./source/n/netwatch/netwatch.makefile.diff.gz
+-rw-r--r--   1 root root       233 2009-03-04 08:01 ./source/n/netwatch/netwatch.phonemyself.diff.gz
+-rw-r--r--   1 root root       765 2009-03-04 08:01 ./source/n/netwatch/slack-desc
+drwxr-xr-x   4 root root      4096 2008-12-06 21:40 ./source/n/network-scripts
+-rw-r--r--   1 root root      3038 2005-05-20 20:48 ./source/n/network-scripts/README.rc.inet1
+-rw-r--r--   1 root root       485 2007-04-26 01:50 ./source/n/network-scripts/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2009-08-05 18:51 ./source/n/network-scripts/manpages
+-rw-r--r--   1 root root      3299 2009-08-05 18:51 ./source/n/network-scripts/manpages/rc.inet1.8
+-rw-r--r--   1 root root      5525 2009-08-05 18:51 ./source/n/network-scripts/manpages/rc.inet1.conf.5
+-rwxr-xr-x   1 root root      2472 2012-08-14 22:52 ./source/n/network-scripts/network-scripts.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-05 17:13 ./source/n/network-scripts/scripts
+-rw-r--r--   1 root root        21 1999-01-28 01:15 ./source/n/network-scripts/scripts/HOSTNAME
+-rw-r--r--   1 root root        27 1994-07-07 15:39 ./source/n/network-scripts/scripts/host.conf
+-rw-r--r--   1 root root       627 2003-08-27 01:07 ./source/n/network-scripts/scripts/hosts
+-rw-r--r--   1 root root       293 1993-11-26 01:54 ./source/n/network-scripts/scripts/hosts.allow
+-rw-r--r--   1 root root       296 1993-11-26 01:54 ./source/n/network-scripts/scripts/hosts.deny
+-rw-r--r--   1 root root       320 1998-02-09 01:57 ./source/n/network-scripts/scripts/hosts.equiv
+-rw-r--r--   1 root root     21573 2012-06-23 16:44 ./source/n/network-scripts/scripts/netconfig
+-rw-r--r--   1 root root       233 1999-10-07 05:21 ./source/n/network-scripts/scripts/networks
+-rw-r--r--   1 root root        24 1998-02-09 02:21 ./source/n/network-scripts/scripts/nntpserver
+-rw-r--r--   1 root root      5748 2002-02-10 09:01 ./source/n/network-scripts/scripts/protocols
+-rw-r--r--   1 root root     10634 2012-08-05 17:13 ./source/n/network-scripts/scripts/rc.inet1
+-rw-r--r--   1 root root      5059 2012-06-23 16:44 ./source/n/network-scripts/scripts/rc.inet1.conf
+-rw-r--r--   1 root root      4845 2012-08-14 22:53 ./source/n/network-scripts/scripts/rc.inet2
+-rw-r--r--   1 root root      2684 2008-12-03 22:58 ./source/n/network-scripts/scripts/rc.ip_forward
+-rw-r--r--   1 root root        19 1999-01-28 01:15 ./source/n/network-scripts/scripts/resolv.conf
+-rw-r--r--   1 root root       349 2003-02-18 23:53 ./source/n/network-scripts/scripts/setup.netconfig
+-rw-r--r--   1 root root      1049 2008-02-11 03:44 ./source/n/network-scripts/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/netwrite
+-rw-r--r--   1 root root       266 2001-02-26 02:24 ./source/n/netwrite/netwrite-0.17.diff.gz
+-rw-r--r--   1 root root     16110 2000-07-31 03:04 ./source/n/netwrite/netwrite-0.17.tar.gz
+-rwxr-xr-x   1 root root      2767 2010-08-12 15:14 ./source/n/netwrite/netwrite.SlackBuild
+-rw-r--r--   1 root root      1019 2007-04-30 02:34 ./source/n/netwrite/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/newspost
+-rw-r--r--   1 root root     61412 2003-05-05 14:28 ./source/n/newspost/newspost-2.1.1.tar.gz
+-rwxr-xr-x   1 root root      2414 2010-08-12 15:15 ./source/n/newspost/newspost.SlackBuild
+-rw-r--r--   1 root root       970 2003-07-18 22:21 ./source/n/newspost/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-21 23:41 ./source/n/nfs-utils
+-rw-r--r--   1 root root       651 2011-03-21 23:41 ./source/n/nfs-utils/_nfs-utils.tar.gz
+-rw-r--r--   1 root root       515 2011-03-21 23:39 ./source/n/nfs-utils/doinst.sh.gz
+-rw-r--r--   1 root root       248 2010-09-28 12:49 ./source/n/nfs-utils/nfs-utils-1.2.3.tar.sign
+-rw-r--r--   1 root root    533952 2010-09-28 12:49 ./source/n/nfs-utils/nfs-utils-1.2.3.tar.xz
+-rwxr-xr-x   1 root root      4813 2011-03-21 23:41 ./source/n/nfs-utils/nfs-utils.SlackBuild
+-rw-r--r--   1 root root       255 2008-03-31 22:19 ./source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff.gz
+-rw-r--r--   1 root root      2449 2011-03-18 20:44 ./source/n/nfs-utils/rc.nfsd
+-rw-r--r--   1 root root       782 2003-02-02 05:38 ./source/n/nfs-utils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-26 15:52 ./source/n/nmap
+-rw-r--r--   1 root root  19844240 2012-06-16 19:33 ./source/n/nmap/nmap-6.01.tar.xz
+-rwxr-xr-x   1 root root      5004 2012-07-04 04:00 ./source/n/nmap/nmap.SlackBuild
+-rw-r--r--   1 root root       302 2009-04-30 22:29 ./source/n/nmap/nmap.ndiff.mandir.diff.gz
+-rw-r--r--   1 root root      1107 2002-03-29 08:29 ./source/n/nmap/slack-desc
+drwxr-xr-x   2 root root      4096 2009-11-12 00:21 ./source/n/nn
+-rw-r--r--   1 root root      4844 2001-07-02 05:31 ./source/n/nn/NNTP.gz
+-rw-r--r--   1 root root       315 2006-06-27 21:55 ./source/n/nn/doinst.sh.gz
+-rw-r--r--   1 root root       509 2009-11-11 21:28 ./source/n/nn/m-x86_64.h.gz
+-rw-r--r--   1 root root    352656 2005-11-18 13:08 ./source/n/nn/nn-6.7.3.tar.bz2
+-rwxr-xr-x   1 root root      4072 2009-11-12 00:23 ./source/n/nn/nn.SlackBuild
+-rw-r--r--   1 root root       287 2006-06-27 22:14 ./source/n/nn/nn.badnntphost.diff.gz
+-rw-r--r--   1 root root      1349 2009-03-17 00:18 ./source/n/nn/nn.destdir.diff.gz
+-rw-r--r--   1 root root      1281 2009-11-11 21:16 ./source/n/nn/nn.diff.gz
+-rw-r--r--   1 root root        53 2006-06-27 21:53 ./source/n/nn/nntpserver.gz
+-rw-r--r--   1 root root       897 2002-03-29 01:23 ./source/n/nn/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-08 01:13 ./source/n/ntp
+-rw-r--r--   1 root root       314 2007-05-07 04:51 ./source/n/ntp/doinst.sh.gz
+-rw-r--r--   1 root root   2834512 2011-12-24 23:52 ./source/n/ntp/ntp-4.2.6p5.tar.xz
+-rwxr-xr-x   1 root root      4724 2012-07-04 16:38 ./source/n/ntp/ntp.SlackBuild
+-rw-r--r--   1 root root      1867 2011-01-26 00:14 ./source/n/ntp/ntp.conf
+-rw-r--r--   1 root root        22 1999-10-07 19:50 ./source/n/ntp/ntp.keys
+-rw-r--r--   1 root root       269 2010-04-22 04:38 ./source/n/ntp/ntp.nano.diff.gz
+-rw-r--r--   1 root root       804 2010-04-22 04:31 ./source/n/ntp/rc.ntpd
+-rw-r--r--   1 root root       986 2002-02-27 23:02 ./source/n/ntp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-19 01:43 ./source/n/obex-data-server
+-rw-r--r--   1 root root       297 2009-11-25 04:57 ./source/n/obex-data-server/doinst.sh.gz
+-rw-r--r--   1 root root    150212 2011-04-04 10:19 ./source/n/obex-data-server/obex-data-server-0.4.6.tar.xz
+-rwxr-xr-x   1 root root      3979 2012-03-19 02:21 ./source/n/obex-data-server/obex-data-server.SlackBuild
+-rw-r--r--   1 root root        35 2012-03-19 01:43 ./source/n/obex-data-server/obex-data-server.url
+-rw-r--r--   1 root root       879 2012-07-22 17:14 ./source/n/obex-data-server/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-13 22:25 ./source/n/obexfs
+-rw-r--r--   1 root root     68953 2009-11-24 01:46 ./source/n/obexfs/obexfs-0.12.tar.bz2
+-rwxr-xr-x   1 root root      3359 2010-05-02 07:29 ./source/n/obexfs/obexfs.SlackBuild
+-rw-r--r--   1 root root       876 2009-11-25 04:42 ./source/n/obexfs/slack-desc
+drwxr-xr-x   2 root root      4096 2010-04-17 15:59 ./source/n/obexftp
+-rw-r--r--   1 root root    402552 2009-02-17 18:54 ./source/n/obexftp/obexftp-0.23.tar.bz2
+-rwxr-xr-x   1 root root      4793 2012-06-19 19:49 ./source/n/obexftp/obexftp.SlackBuild
+-rw-r--r--   1 root root       281 2010-04-19 18:20 ./source/n/obexftp/ruby_rstringlen.diff.gz
+-rw-r--r--   1 root root       924 2007-05-18 03:09 ./source/n/obexftp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-04 00:24 ./source/n/openldap-client
+-rw-r--r--   1 root root       275 2006-01-17 21:18 ./source/n/openldap-client/doinst.sh.gz
+-rw-r--r--   1 root root   3539972 2012-04-23 15:16 ./source/n/openldap-client/openldap-2.4.31.tar.xz
+-rwxr-xr-x   1 root root      4643 2012-07-09 16:31 ./source/n/openldap-client/openldap-client.SlackBuild
+-rw-r--r--   1 root root      1027 2006-01-18 01:55 ./source/n/openldap-client/slack-desc
+drwxr-xr-x   2 root root      4096 2009-12-28 05:27 ./source/n/openobex
+-rw-r--r--   1 root root    290891 2009-02-08 18:35 ./source/n/openobex/openobex-1.5.tar.bz2
+-rwxr-xr-x   1 root root      3972 2010-05-02 07:14 ./source/n/openobex/openobex.SlackBuild
+-rw-r--r--   1 root root       997 2007-05-12 23:06 ./source/n/openobex/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-29 16:59 ./source/n/openssh
+-rw-r--r--   1 root root       470 2006-09-28 21:11 ./source/n/openssh/doinst.sh.gz
+-rw-r--r--   1 root root   1134820 2012-08-29 01:54 ./source/n/openssh/openssh-6.1p1.tar.gz
+-rw-r--r--   1 root root       188 2012-08-29 01:54 ./source/n/openssh/openssh-6.1p1.tar.gz.asc
+-rwxr-xr-x   1 root root      5040 2012-08-29 17:01 ./source/n/openssh/openssh.SlackBuild
+-rw-r--r--   1 root root      1600 2011-01-27 21:54 ./source/n/openssh/rc.sshd
+-rw-r--r--   1 root root      1134 2002-03-07 23:03 ./source/n/openssh/slack-desc
+drwxr-xr-x   3 root root      4096 2012-08-08 22:46 ./source/n/openssl
+-rw-r--r--   1 root root      1758 2012-08-08 22:46 ./source/n/openssl/certwatch.gz
+-rw-r--r--   1 root root       281 2007-06-13 17:20 ./source/n/openssl/doinst.sh-openssl-solibs.gz
+-rw-r--r--   1 root root       501 2012-07-12 16:21 ./source/n/openssl/doinst.sh-openssl.gz
+-rw-r--r--   1 root root   4457113 2012-05-10 15:20 ./source/n/openssl/openssl-1.0.1c.tar.gz
+-rw-r--r--   1 root root       482 2012-05-10 15:20 ./source/n/openssl/openssl-1.0.1c.tar.gz.asc
+-rwxr-xr-x   1 root root      7645 2012-08-08 22:46 ./source/n/openssl/openssl.SlackBuild
+-rw-r--r--   1 root root       470 2012-07-03 23:30 ./source/n/openssl/openssl.optsx86.diff.gz
+-rw-r--r--   1 root root       303 2012-07-03 18:01 ./source/n/openssl/openssl.soname.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-03 18:53 ./source/n/openssl/openssl0
+-rw-r--r--   1 root root      1737 2011-02-10 19:03 ./source/n/openssl/openssl0/certwatch.gz
+-rw-r--r--   1 root root       281 2007-06-13 17:20 ./source/n/openssl/openssl0/doinst.sh-openssl-solibs.gz
+-rw-r--r--   1 root root       433 2011-03-22 18:29 ./source/n/openssl/openssl0/doinst.sh-openssl.gz
+-rw-r--r--   1 root root   3782486 2012-05-10 14:41 ./source/n/openssl/openssl0/openssl-0.9.8x.tar.gz
+-rw-r--r--   1 root root       482 2012-05-10 14:41 ./source/n/openssl/openssl0/openssl-0.9.8x.tar.gz.asc
+-rwxr-xr-x   1 root root      7018 2012-01-20 16:48 ./source/n/openssl/openssl0/openssl.SlackBuild
+-rw-r--r--   1 root root       501 2006-01-17 23:28 ./source/n/openssl/openssl0/openssl.optsx86.diff.gz
+-rw-r--r--   1 root root       283 2005-10-13 03:02 ./source/n/openssl/openssl0/openssl.soname.diff.gz
+-rwxr-xr-x   1 root root      7058 2012-07-03 18:53 ./source/n/openssl/openssl0/openssl0.build
+-rw-r--r--   1 root root      1019 2002-04-06 20:23 ./source/n/openssl/openssl0/slack-desc.openssl
+-rw-r--r--   1 root root      1090 2012-07-03 23:23 ./source/n/openssl/openssl0/slack-desc.openssl-solibs
+-rw-r--r--   1 root root      1019 2002-04-06 20:23 ./source/n/openssl/slack-desc.openssl
+-rw-r--r--   1 root root      1090 2012-07-03 23:23 ./source/n/openssl/slack-desc.openssl-solibs
+drwxr-xr-x   2 root root      4096 2012-07-04 17:23 ./source/n/openvpn
+-rw-r--r--   1 root root      1375 2007-06-10 01:25 ./source/n/openvpn/README
+-rw-r--r--   1 root root    911158 2011-12-21 13:23 ./source/n/openvpn/openvpn-2.2.2.tar.gz
+-rw-r--r--   1 root root       198 2011-12-21 13:23 ./source/n/openvpn/openvpn-2.2.2.tar.gz.asc
+-rwxr-xr-x   1 root root      4693 2012-07-04 17:24 ./source/n/openvpn/openvpn.SlackBuild
+-rw-r--r--   1 root root      6942 2007-06-12 03:48 ./source/n/openvpn/openvpn.conf.sample
+-rw-r--r--   1 root root       889 2012-07-22 17:15 ./source/n/openvpn/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-08 16:34 ./source/n/p11-kit
+-rw-r--r--   1 root root    349660 2012-03-09 13:24 ./source/n/p11-kit/p11-kit-0.12.tar.xz
+-rwxr-xr-x   1 root root      3146 2012-07-08 16:36 ./source/n/p11-kit/p11-kit.SlackBuild
+-rw-r--r--   1 root root       976 2011-08-22 04:37 ./source/n/p11-kit/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-14 18:20 ./source/n/php
+-rw-r--r--   1 root root       428 2012-08-09 01:10 ./source/n/php/doinst.sh.gz
+-rwxr-xr-x   1 root root        59 2012-09-14 18:19 ./source/n/php/fetch-php.sh
+-rw-r--r--   1 root root      1022 2009-10-02 23:56 ./source/n/php/mod_php.conf.example
+drwxr-xr-x   2 root root      4096 2008-05-07 05:21 ./source/n/php/pear
+-rw-r--r--   1 root root   9112252 2012-09-14 18:19 ./source/n/php/php-5.4.7.tar.xz
+-rw-r--r--   1 root root       531 2012-05-21 15:34 ./source/n/php/php-fpm.conf.diff.gz
+-rwxr-xr-x   1 root root      8835 2012-09-14 18:20 ./source/n/php/php.SlackBuild
+-rw-r--r--   1 root root       724 2012-08-09 01:06 ./source/n/php/php.ini-development.diff.gz
+-rw-r--r--   1 root root       830 2005-12-09 05:18 ./source/n/php/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/pidentd
+-rw-r--r--   1 root root       296 2002-04-05 23:57 ./source/n/pidentd/doinst.sh.gz
+-rw-r--r--   1 root root    145505 2005-10-18 14:06 ./source/n/pidentd/pidentd-3.0.19.tar.gz
+-rw-r--r--   1 root root       185 2005-10-18 14:06 ./source/n/pidentd/pidentd-3.0.19.tar.gz.sig
+-rwxr-xr-x   1 root root      3112 2012-07-04 22:12 ./source/n/pidentd/pidentd.SlackBuild
+-rw-r--r--   1 root root       893 2004-06-13 20:28 ./source/n/pidentd/pidentd.conf.diff.gz
+-rw-r--r--   1 root root      1036 2002-04-06 00:20 ./source/n/pidentd/slack-desc
+drwxr-xr-x   2 root root      4096 2011-01-14 03:01 ./source/n/pinentry
+-rw-r--r--   1 root root    348208 2010-12-16 17:05 ./source/n/pinentry/pinentry-0.8.1.tar.xz
+-rwxr-xr-x   1 root root      4087 2010-03-06 00:37 ./source/n/pinentry/pinentry.SlackBuild
+-rw-r--r--   1 root root       781 2007-03-15 20:47 ./source/n/pinentry/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/popa3d
+-rw-r--r--   1 root root       164 2006-09-30 23:56 ./source/n/popa3d/doinst.sh.gz
+-rw-r--r--   1 root root     32848 2006-05-23 00:47 ./source/n/popa3d/popa3d-1.0.2.tar.gz
+-rw-r--r--   1 root root       331 2006-05-23 00:47 ./source/n/popa3d/popa3d-1.0.2.tar.gz.sign
+-rwxr-xr-x   1 root root      2795 2012-07-04 03:59 ./source/n/popa3d/popa3d.SlackBuild
+-rw-r--r--   1 root root       769 2006-03-12 22:23 ./source/n/popa3d/popa3d.diff.gz
+-rw-r--r--   1 root root      1002 2004-02-21 20:45 ./source/n/popa3d/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/portmap
+-rw-r--r--   1 root root       271 2006-09-21 03:15 ./source/n/portmap/doinst.sh.gz
+-rw-r--r--   1 root root     20092 2007-05-11 03:06 ./source/n/portmap/portmap-6.0.tar.bz2
+-rwxr-xr-x   1 root root      3151 2010-08-12 15:18 ./source/n/portmap/portmap.SlackBuild
+-rw-r--r--   1 root root       217 2007-05-17 22:45 ./source/n/portmap/portmap.lwrap.needs.lnsl.diff.gz
+-rw-r--r--   1 root root       610 2007-05-17 22:51 ./source/n/portmap/rc.rpc.gz
+-rw-r--r--   1 root root       987 2002-03-22 03:05 ./source/n/portmap/slack-desc
+drwxr-xr-x   2 root root      4096 2009-11-18 04:02 ./source/n/ppp
+-rw-r--r--   1 root root       324 2004-02-23 06:39 ./source/n/ppp/doinst.sh.gz
+-rw-r--r--   1 root root      3620 1999-09-30 05:49 ./source/n/ppp/options.new.gz
+-rw-r--r--   1 root root    556120 2009-11-17 14:03 ./source/n/ppp/ppp-2.4.5.tar.bz2
+-rwxr-xr-x   1 root root      5443 2010-02-12 02:07 ./source/n/ppp/ppp.SlackBuild
+-rw-r--r--   1 root root       401 2004-02-23 05:37 ./source/n/ppp/ppp.slack.diff.gz
+-rw-r--r--   1 root root       348 2002-05-20 02:06 ./source/n/ppp/pppsetup-1.98.backupfiles.diff.gz
+-rw-r--r--   1 root root      1303 2002-05-20 01:53 ./source/n/ppp/pppsetup-1.98.moredevs.diff.gz
+-rw-r--r--   1 root root       270 2000-10-21 00:47 ./source/n/ppp/pppsetup-1.98.pppoff.diff.gz
+-rw-r--r--   1 root root     11656 2000-06-18 21:01 ./source/n/ppp/pppsetup-1.98.slack.diff.gz
+-rw-r--r--   1 root root     78697 1998-03-04 21:07 ./source/n/ppp/pppsetup-1.98.tar.gz
+-rw-r--r--   1 root root       812 2005-07-25 05:56 ./source/n/ppp/radius.msdict.gz
+-rw-r--r--   1 root root    119071 2002-02-03 13:59 ./source/n/ppp/radiusclient-0.3.2.tar.bz2
+-rw-r--r--   1 root root       372 2005-07-25 05:56 ./source/n/ppp/realms.gz
+-rw-r--r--   1 root root       129 2005-07-25 05:56 ./source/n/ppp/servers.gz
+-rw-r--r--   1 root root       905 2002-03-07 03:31 ./source/n/ppp/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-12 15:30 ./source/n/procmail
+-rw-r--r--   1 root root       294 2001-08-21 22:22 ./source/n/procmail/_procmail.tar.gz
+-rw-r--r--   1 root root    226817 2001-09-11 05:10 ./source/n/procmail/procmail-3.22.tar.gz
+-rw-r--r--   1 root root       366 2001-09-11 05:10 ./source/n/procmail/procmail-3.22.tar.gz.sig
+-rwxr-xr-x   1 root root      2942 2010-08-12 15:30 ./source/n/procmail/procmail.SlackBuild
+-rw-r--r--   1 root root       277 2006-09-19 04:10 ./source/n/procmail/procmail.lfs.diff.gz
+-rw-r--r--   1 root root     13073 2002-12-26 21:18 ./source/n/procmail/procmail_3.22-5.diff.gz
+-rw-r--r--   1 root root      1146 2002-04-06 20:25 ./source/n/procmail/slack-desc
+drwxr-xr-x   3 root root      4096 2012-02-03 18:29 ./source/n/proftpd
+-rw-r--r--   1 root root       306 2003-03-06 07:52 ./source/n/proftpd/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2001-02-26 07:35 ./source/n/proftpd/etc
+-rw-r--r--   1 root root       581 2001-02-26 07:31 ./source/n/proftpd/etc/ftpusers
+-rw-r--r--   1 root root      2046 2008-07-29 18:18 ./source/n/proftpd/etc/proftpd.conf
+-rw-r--r--   1 root root   6127488 2011-11-11 17:42 ./source/n/proftpd/proftpd-1.3.4a.tar.xz
+-rwxr-xr-x   1 root root      4264 2012-07-04 03:23 ./source/n/proftpd/proftpd.SlackBuild
+-rw-r--r--   1 root root       797 2004-09-18 22:48 ./source/n/proftpd/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-19 20:02 ./source/n/pssh
+-rw-r--r--   1 root root     23427 2012-02-02 16:20 ./source/n/pssh/pssh-2.3.1.tar.gz
+-rwxr-xr-x   1 root root      2961 2012-06-19 20:03 ./source/n/pssh/pssh.SlackBuild
+-rw-r--r--   1 root root      1035 2011-01-23 07:45 ./source/n/pssh/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/pth
+-rw-r--r--   1 root root    507518 2007-01-05 15:04 ./source/n/pth/pth-2.0.7.tar.bz2
+-rwxr-xr-x   1 root root      3847 2010-08-12 15:32 ./source/n/pth/pth.SlackBuild
+-rw-r--r--   1 root root       926 2007-03-15 20:48 ./source/n/pth/slack-desc
+drwxr-xr-x   2 root root      4096 2010-01-25 21:40 ./source/n/rdist
+-rw-r--r--   1 root root       360 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-00.linux.diff.gz
+-rw-r--r--   1 root root       836 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-01.links.diff.gz
+-rw-r--r--   1 root root       419 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-03.hardlink.diff.gz
+-rw-r--r--   1 root root       929 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-04.bison.diff.gz
+-rw-r--r--   1 root root       233 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-05.varargs.diff.gz
+-rw-r--r--   1 root root       271 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-06.maxargs.diff.gz
+-rw-r--r--   1 root root      1500 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-07.lfs.diff.gz
+-rw-r--r--   1 root root     12347 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-08.cleanup.diff.gz
+-rw-r--r--   1 root root       304 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-09.svr4.diff.gz
+-rw-r--r--   1 root root       253 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-10.ssh.diff.gz
+-rw-r--r--   1 root root       419 2004-09-09 11:13 ./source/n/rdist/rdist-6.1.5-11.mkstemp.diff.gz
+-rw-r--r--   1 root root       963 2005-05-04 14:08 ./source/n/rdist/rdist-6.1.5-12.stat64.diff.gz
+-rw-r--r--   1 root root       462 2006-08-02 09:11 ./source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz
+-rw-r--r--   1 root root    117861 2001-04-03 17:01 ./source/n/rdist/rdist-6.1.5.tar.gz
+-rw-r--r--   1 root root      5320 2004-09-09 11:08 ./source/n/rdist/rdist-eu-license.txt
+-rwxr-xr-x   1 root root      3705 2010-01-25 21:41 ./source/n/rdist/rdist.SlackBuild
+-rw-r--r--   1 root root       811 2008-02-11 03:44 ./source/n/rdist/slack-desc
+drwxr-xr-x   2 root root      4096 2010-12-30 23:00 ./source/n/rfkill
+-rw-r--r--   1 root root      8052 2010-08-15 16:17 ./source/n/rfkill/rfkill-0.4.tar.bz2
+-rwxr-xr-x   1 root root      2827 2011-01-22 04:34 ./source/n/rfkill/rfkill.SlackBuild
+-rw-r--r--   1 root root        99 2010-12-30 23:00 ./source/n/rfkill/rfkill.url
+-rw-r--r--   1 root root       744 2010-08-16 03:13 ./source/n/rfkill/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/rp-pppoe
+-rw-r--r--   1 root root       307 2005-09-03 17:27 ./source/n/rp-pppoe/doinst.sh.gz
+-rw-r--r--   1 root root    215288 2008-06-30 14:01 ./source/n/rp-pppoe/rp-pppoe-3.10.tar.gz
+-rwxr-xr-x   1 root root      2872 2010-08-12 15:33 ./source/n/rp-pppoe/rp-pppoe.SlackBuild
+-rw-r--r--   1 root root       958 2002-04-15 04:13 ./source/n/rp-pppoe/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-18 23:55 ./source/n/rsync
+-rw-r--r--   1 root root    574708 2011-09-23 10:44 ./source/n/rsync/rsync-3.0.9.tar.xz
+-rwxr-xr-x   1 root root      3075 2011-03-27 00:53 ./source/n/rsync/rsync.SlackBuild
+-rw-r--r--   1 root root       950 2008-02-11 03:44 ./source/n/rsync/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-18 16:42 ./source/n/samba
+-rw-r--r--   1 root root       374 2003-03-07 21:49 ./source/n/samba/doinst.sh.gz
+-rwxr-xr-x   1 root root      1548 2010-11-03 21:28 ./source/n/samba/prune-samba.sh
+-rw-r--r--   1 root root       791 2003-10-01 04:12 ./source/n/samba/rc.samba
+-rw-r--r--   1 root root  11502540 2012-09-18 16:40 ./source/n/samba/samba-3.6.8.tar.xz
+-rwxr-xr-x   1 root root      6414 2012-07-04 22:28 ./source/n/samba/samba.SlackBuild
+-rw-r--r--   1 root root       965 2012-06-20 17:31 ./source/n/samba/slack-desc
+-rw-r--r--   1 root root      9671 2009-10-03 20:59 ./source/n/samba/smb.conf.default
+-rw-r--r--   1 root root      9683 2009-09-30 12:17 ./source/n/samba/smb.conf.default.orig
+-rw-r--r--   1 root root       528 2009-10-03 20:59 ./source/n/samba/smb.conf.diff.gz
+-rw-r--r--   1 root root       271 2010-11-03 21:36 ./source/n/samba/talloc.pc
+drwxr-xr-x   2 root root      4096 2012-04-11 21:14 ./source/n/sendmail
+-rw-r--r--   1 root root      1053 2011-05-26 02:27 ./source/n/sendmail/8.14.5.auth2.p0
+-rw-r--r--   1 root root       287 2011-05-26 02:32 ./source/n/sendmail/8.14.5.auth2.p0.sig
+-rw-r--r--   1 root root       799 2008-04-12 05:48 ./source/n/sendmail/Build.gz
+-rwxr-xr-x   1 root root        63 2008-11-26 21:58 ./source/n/sendmail/SlackBuild
+-rwxr-xr-x   1 root root      5877 2012-07-03 23:46 ./source/n/sendmail/SlackBuild-sendmail
+-rwxr-xr-x   1 root root      2110 2012-07-03 23:46 ./source/n/sendmail/SlackBuild-sendmail-cf
+-rw-r--r--   1 root root      4793 2009-06-26 19:34 ./source/n/sendmail/_sendmail.tar.gz
+-rw-r--r--   1 root root       224 2002-02-14 01:48 ./source/n/sendmail/linux.uucp.mc
+-rw-r--r--   1 root root      2742 2008-04-12 06:41 ./source/n/sendmail/sendmail-slackware-tls-sasl.mc
+-rw-r--r--   1 root root      2510 2008-04-12 07:06 ./source/n/sendmail/sendmail-slackware-tls.mc
+-rw-r--r--   1 root root      1825 2003-05-05 03:34 ./source/n/sendmail/sendmail-slackware.mc
+-rw-r--r--   1 root root   2092508 2011-05-17 01:16 ./source/n/sendmail/sendmail.8.14.5.tar.gz
+-rw-r--r--   1 root root       287 2011-05-17 01:16 ./source/n/sendmail/sendmail.8.14.5.tar.gz.sig
+-rw-r--r--   1 root root       467 2010-04-22 23:21 ./source/n/sendmail/site.config.m4
+-rw-r--r--   1 root root       962 2002-06-01 20:17 ./source/n/sendmail/slack-desc.sendmail
+-rw-r--r--   1 root root      1050 2002-06-01 20:19 ./source/n/sendmail/slack-desc.sendmail-cf
+drwxr-xr-x   2 root root      4096 2010-05-19 02:27 ./source/n/slrn
+-rw-r--r--   1 root root       280 2010-05-19 02:27 ./source/n/slrn/doinst.sh.gz
+-rw-r--r--   1 root root       764 2008-11-11 20:39 ./source/n/slrn/slack-desc
+-rw-r--r--   1 root root   1040218 2008-10-25 19:16 ./source/n/slrn/slrn-0.9.9p1.tar.bz2
+-rwxr-xr-x   1 root root      3834 2012-07-04 22:24 ./source/n/slrn/slrn.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-05-03 01:09 ./source/n/snownews
+-rw-r--r--   1 root root       874 2009-05-17 03:56 ./source/n/snownews/slack-desc
+-rw-r--r--   1 root root    167944 2009-09-17 06:44 ./source/n/snownews/snownews-1.5.12.tar.gz
+-rw-r--r--   1 root root       194 2009-09-17 06:46 ./source/n/snownews/snownews-1.5.12.tar.gz.asc
+-rwxr-xr-x   1 root root      3588 2012-07-04 04:28 ./source/n/snownews/snownews.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-04 17:00 ./source/n/stunnel
+-rw-r--r--   1 root root       265 2005-01-09 07:05 ./source/n/stunnel/doinst.sh.gz
+-rw-r--r--   1 root root       290 2003-08-28 23:32 ./source/n/stunnel/generate-stunnel-key.sh
+-rw-r--r--   1 root root       968 2003-08-28 23:04 ./source/n/stunnel/slack-desc
+-rw-r--r--   1 root root    529720 2012-03-19 22:18 ./source/n/stunnel/stunnel-4.53.tar.gz
+-rw-r--r--   1 root root       190 2012-03-19 22:18 ./source/n/stunnel/stunnel-4.53.tar.gz.asc
+-rwxr-xr-x   1 root root      4376 2010-05-03 06:39 ./source/n/stunnel/stunnel.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/tcp_wrappers
+-rw-r--r--   1 root root      1112 2007-04-29 22:11 ./source/n/tcp_wrappers/slack-desc
+-rwxr-xr-x   1 root root      3279 2010-08-12 15:34 ./source/n/tcp_wrappers/tcp_wrappers.SlackBuild
+-rw-r--r--   1 root root    118844 2004-02-22 22:48 ./source/n/tcp_wrappers/tcp_wrappers_7.6.tar.gz
+drwxr-xr-x   2 root root      4096 2012-07-04 03:39 ./source/n/tcpdump
+-rw-r--r--   1 root root       908 2010-08-05 20:36 ./source/n/tcpdump/slack-desc
+-rw-r--r--   1 root root    887619 2012-06-12 17:10 ./source/n/tcpdump/tcpdump-4.3.0.tar.gz
+-rw-r--r--   1 root root       308 2012-07-04 03:39 ./source/n/tcpdump/tcpdump-4.3.0.tar.gz.sig
+-rwxr-xr-x   1 root root      3171 2012-07-04 03:57 ./source/n/tcpdump/tcpdump.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-23 00:42 ./source/n/telnet
+-rw-r--r--   1 root root       522 2001-08-09 19:36 ./source/n/telnet/netkit-telnet-0.17-ayt.patch.gz
+-rw-r--r--   1 root root       176 2001-02-26 02:21 ./source/n/telnet/netkit-telnet-0.17.diff.gz
+-rw-r--r--   1 root root    133749 2000-07-31 03:04 ./source/n/telnet/netkit-telnet-0.17.tar.gz
+-rw-r--r--   1 root root      1014 2012-07-22 17:15 ./source/n/telnet/slack-desc
+-rw-r--r--   1 root root      2605 2005-08-28 22:42 ./source/n/telnet/telnet-OpenBSD-014_telnet.diff.gz
+-rw-r--r--   1 root root       869 2002-03-22 04:41 ./source/n/telnet/telnet-OpenBSD-20020321.diff.gz
+-rw-r--r--   1 root root    104068 2002-03-22 04:19 ./source/n/telnet/telnet-OpenBSD-20020321.tar.gz
+-rwxr-xr-x   1 root root      2950 2010-08-12 15:34 ./source/n/telnet/telnet.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-05-03 06:41 ./source/n/tftp-hpa
+-rw-r--r--   1 root root      1015 2007-04-29 21:07 ./source/n/tftp-hpa/slack-desc
+-rw-r--r--   1 root root     91829 2008-10-20 22:09 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2
+-rw-r--r--   1 root root       248 2008-10-20 22:09 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign
+-rwxr-xr-x   1 root root      2781 2010-05-03 06:43 ./source/n/tftp-hpa/tftp-hpa.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-08-12 15:36 ./source/n/tin
+-rw-r--r--   1 root root       944 2002-03-06 05:36 ./source/n/tin/slack-desc
+-rw-r--r--   1 root root   1437604 2007-02-01 13:11 ./source/n/tin/tin-1.8.3.tar.bz2
+-rw-r--r--   1 root root       286 2007-02-01 13:18 ./source/n/tin/tin-1.8.3.tar.bz2.sign
+-rwxr-xr-x   1 root root      3304 2011-02-24 23:08 ./source/n/tin/tin.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-05-31 16:22 ./source/n/traceroute
+-rw-r--r--   1 root root       969 2002-03-16 05:59 ./source/n/traceroute/slack-desc
+-rw-r--r--   1 root root     66931 2011-08-18 15:32 ./source/n/traceroute/traceroute-2.0.18.tar.gz
+-rwxr-xr-x   1 root root      2967 2010-05-10 08:27 ./source/n/traceroute/traceroute.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-08-12 16:04 ./source/n/trn
+-rw-r--r--   1 root root      5599 1998-10-26 17:07 ./source/n/trn/_trn.tar.gz
+-rw-r--r--   1 root root      1697 2002-03-07 02:29 ./source/n/trn/config.sh.gz
+-rw-r--r--   1 root root      1716 2009-03-16 23:47 ./source/n/trn/config.x86_64.sh.gz
+-rw-r--r--   1 root root       744 2002-03-06 08:04 ./source/n/trn/slack-desc
+-rw-r--r--   1 root root    325115 1995-01-09 07:11 ./source/n/trn/trn-3.6.tar.gz
+-rwxr-xr-x   1 root root      2902 2010-08-12 16:05 ./source/n/trn/trn.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/uucp
+-rw-r--r--   1 root root      1001 2003-06-05 22:07 ./source/n/uucp/_uucp.tar.gz
+-rw-r--r--   1 root root      1777 2003-06-05 21:46 ./source/n/uucp/policy.h.diff.gz
+-rw-r--r--   1 root root       737 2002-02-27 23:14 ./source/n/uucp/slack-desc
+-rw-r--r--   1 root root   1013234 2003-06-04 00:51 ./source/n/uucp/uucp-1.07.tar.gz
+-rwxr-xr-x   1 root root      2666 2010-08-12 16:05 ./source/n/uucp/uucp.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/vlan
+-rw-r--r--   1 root root       888 2007-04-29 22:43 ./source/n/vlan/slack-desc
+-rw-r--r--   1 root root    132059 2005-10-20 09:17 ./source/n/vlan/vlan.1.9.tar.bz2
+-rwxr-xr-x   1 root root      2329 2010-08-12 16:07 ./source/n/vlan/vlan.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-09-18 19:41 ./source/n/vsftpd
+-rw-r--r--   1 root root       283 2009-02-19 17:05 ./source/n/vsftpd/doinst.sh.gz
+-rw-r--r--   1 root root       953 2004-09-03 18:38 ./source/n/vsftpd/slack-desc
+-rw-r--r--   1 root root    192808 2012-09-18 19:41 ./source/n/vsftpd/vsftpd-3.0.2.tar.gz
+-rw-r--r--   1 root root       198 2012-09-18 19:41 ./source/n/vsftpd/vsftpd-3.0.2.tar.gz.asc
+-rwxr-xr-x   1 root root      3426 2012-09-17 19:52 ./source/n/vsftpd/vsftpd.SlackBuild
+-rw-r--r--   1 root root       198 2004-09-03 18:41 ./source/n/vsftpd/vsftpd.builddefs.diff.gz
+-rw-r--r--   1 root root       950 2009-10-19 15:22 ./source/n/vsftpd/vsftpd.conf.diff.gz
+-rw-r--r--   1 root root       115 2004-09-03 18:59 ./source/n/vsftpd/vsftpd.log.gz
+drwxr-xr-x   2 root root      4096 2012-08-14 23:18 ./source/n/wget
+-rw-r--r--   1 root root       264 2008-10-01 23:27 ./source/n/wget/doinst.sh.gz
+-rw-r--r--   1 root root       853 2002-03-23 23:56 ./source/n/wget/slack-desc
+-rw-r--r--   1 root root   1584060 2012-08-05 20:26 ./source/n/wget/wget-1.14.tar.xz
+-rw-r--r--   1 root root        72 2012-08-05 20:26 ./source/n/wget/wget-1.14.tar.xz.sig
+-rwxr-xr-x   1 root root      3395 2012-08-14 23:19 ./source/n/wget/wget.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-04-12 18:39 ./source/n/whois
+-rw-r--r--   1 root root       841 2004-06-13 00:33 ./source/n/whois/slack-desc
+-rwxr-xr-x   1 root root      2519 2012-04-12 18:40 ./source/n/whois/whois.SlackBuild
+-rw-r--r--   1 root root     69696 2012-03-05 22:37 ./source/n/whois/whois_5.0.15.tar.xz
+drwxr-xr-x   3 root root      4096 2009-04-27 18:32 ./source/n/wireless-tools
+-rw-r--r--   1 root root       389 2007-05-10 01:04 ./source/n/wireless-tools/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2012-08-17 01:20 ./source/n/wireless-tools/scripts
+-rw-r--r--   1 root root     13316 2012-08-19 16:52 ./source/n/wireless-tools/scripts/rc.wireless
+-rw-r--r--   1 root root      7320 2007-05-09 17:42 ./source/n/wireless-tools/scripts/rc.wireless.conf
+-rw-r--r--   1 root root      1147 2006-04-30 01:08 ./source/n/wireless-tools/slack-desc
+-rw-r--r--   1 root root    294417 2007-09-18 00:23 ./source/n/wireless-tools/wireless_tools.29.tar.gz
+-rwxr-xr-x   1 root root      3761 2012-08-17 01:20 ./source/n/wireless-tools/wireless_tools.SlackBuild
+-rw-r--r--   1 root root       227 2005-07-14 05:20 ./source/n/wireless-tools/wireless_tools.nowhine.diff.gz
+-rw-r--r--   1 root root       287 2005-07-25 07:19 ./source/n/wireless-tools/wireless_tools.static.diff.gz
+drwxr-xr-x   4 root root      4096 2012-05-31 00:04 ./source/n/wpa_supplicant
+-rw-r--r--   1 root root      2080 2005-08-06 20:17 ./source/n/wpa_supplicant/README.slackware
+drwxr-xr-x   2 root root      4096 2012-05-06 07:28 ./source/n/wpa_supplicant/config
+-rw-r--r--   1 root root       840 2012-07-06 19:08 ./source/n/wpa_supplicant/config/dot.config
+-rw-r--r--   1 root root       139 2012-05-06 07:11 ./source/n/wpa_supplicant/config/wpa_gui.desktop
+-rw-r--r--   1 root root      5124 2009-04-20 18:10 ./source/n/wpa_supplicant/config/wpa_gui.png
+-rw-r--r--   1 root root        65 2012-05-06 07:08 ./source/n/wpa_supplicant/config/wpa_supplicant.conf
+-rw-r--r--   1 root root       100 2012-05-06 07:05 ./source/n/wpa_supplicant/config/wpa_supplicant.logrotate
+-rw-r--r--   1 root root       284 2012-05-06 07:31 ./source/n/wpa_supplicant/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2012-05-06 06:50 ./source/n/wpa_supplicant/patches
+-rw-r--r--   1 root root      1342 2012-05-31 00:15 ./source/n/wpa_supplicant/patches/dbus-service-file-args.diff
+-rw-r--r--   1 root root       600 2012-05-05 22:05 ./source/n/wpa_supplicant/patches/include-unistd_h.diff
+-rw-r--r--   1 root root       537 2012-05-05 22:16 ./source/n/wpa_supplicant/patches/libnl3-includes.diff
+-rw-r--r--   1 root root       562 2012-05-05 22:03 ./source/n/wpa_supplicant/patches/quiet-scan-results-message.diff
+-rw-r--r--   1 root root      4032 2012-05-06 06:03 ./source/n/wpa_supplicant/patches/squelch-driver-disconnect-spam.diff
+-rw-r--r--   1 root root      1067 2008-02-28 05:38 ./source/n/wpa_supplicant/slack-desc
+-rw-r--r--   1 root root   1334288 2012-05-31 00:05 ./source/n/wpa_supplicant/wpa_supplicant-1.0.tar.xz
+-rwxr-xr-x   1 root root      5289 2012-05-31 00:05 ./source/n/wpa_supplicant/wpa_supplicant.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-14 23:10 ./source/n/yptools
+-rw-r--r--   1 root root       616 2000-11-24 23:39 ./source/n/yptools/nsswitch.conf-nis.gz
+-rw-r--r--   1 root root      1334 2012-08-14 23:10 ./source/n/yptools/rc.yp.gz
+-rw-r--r--   1 root root       865 2002-03-05 19:13 ./source/n/yptools/slack-desc
+-rw-r--r--   1 root root    204228 2010-04-21 09:59 ./source/n/yptools/yp-tools-2.12.tar.bz2
+-rw-r--r--   1 root root       248 2010-04-21 09:59 ./source/n/yptools/yp-tools-2.12.tar.bz2.sign
+-rw-r--r--   1 root root    182276 2010-07-07 12:54 ./source/n/yptools/ypbind-mt-1.32.tar.bz2
+-rw-r--r--   1 root root       248 2010-07-07 12:54 ./source/n/yptools/ypbind-mt-1.32.tar.sign
+-rw-r--r--   1 root root    195528 2010-09-24 10:16 ./source/n/yptools/ypserv-2.24.tar.bz2
+-rw-r--r--   1 root root       248 2010-09-24 10:16 ./source/n/yptools/ypserv-2.24.tar.sign
+-rwxr-xr-x   1 root root      9614 2012-08-14 22:26 ./source/n/yptools/yptools.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-23 00:42 ./source/n/ytalk
+-rw-r--r--   1 root root       269 2006-02-03 23:28 ./source/n/ytalk/doinst.sh.gz
+-rw-r--r--   1 root root       745 2002-03-25 03:59 ./source/n/ytalk/slack-desc
+-rw-r--r--   1 root root    110912 2005-02-13 14:14 ./source/n/ytalk/ytalk-3.3.0.tar.bz2
+-rwxr-xr-x   1 root root      2844 2010-08-12 16:08 ./source/n/ytalk/ytalk.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/n/zd1211-firmware
+-rw-r--r--   1 root root     39061 2007-10-04 11:55 ./source/n/zd1211-firmware/zd1211-firmware-1.4.tar.bz2
+-rwxr-xr-x   1 root root      2935 2009-05-19 20:05 ./source/n/zd1211-firmware/zd1211-firmware.SlackBuild
+drwxr-xr-x   5 root root      4096 2010-05-17 19:31 ./source/t
+drwxr-xr-x   3 root root      4096 2010-05-17 19:05 ./source/t/tetex
+-rw-r--r--   1 root root    103137 2005-10-04 18:51 ./source/t/tetex/jadetex-3.13.tar.gz
+-rwxr-xr-x   1 root root      2073 2008-10-15 15:01 ./source/t/tetex/jadetex.build
+drwxr-xr-x   2 root root      4096 2002-08-28 23:00 ./source/t/tetex/profile.d
+-rwxr-xr-x   1 root root       134 2000-04-24 19:46 ./source/t/tetex/profile.d/tetex.csh
+-rwxr-xr-x   1 root root       118 2000-04-24 19:46 ./source/t/tetex/profile.d/tetex.sh
+-rw-r--r--   1 root root       794 2002-08-28 22:34 ./source/t/tetex/slack-desc.tetex
+-rw-r--r--   1 root root       984 2005-02-18 01:42 ./source/t/tetex/slack-desc.tetex-doc
+-rw-r--r--   1 root root   7049516 2005-02-06 19:40 ./source/t/tetex/tetex-src-3.0.tar.xz
+-rw-r--r--   1 root root  75797944 2005-02-06 19:41 ./source/t/tetex/tetex-texmf-3.0.tar.xz
+-rw-r--r--   1 root root  47549400 2005-02-06 19:41 ./source/t/tetex/tetex-texmfsrc-3.0.tar.xz
+-rw-r--r--   1 root root      1759 2006-01-17 12:14 ./source/t/tetex/tetex.CVE-2005-3193.diff.gz
+-rwxr-xr-x   1 root root      9081 2010-05-17 18:14 ./source/t/tetex/tetex.SlackBuild
+-rw-r--r--   1 root root       517 2010-02-19 17:56 ./source/t/tetex/tetex.afm2tfm.getline.diff.gz
+-rw-r--r--   1 root root       303 2005-02-10 20:29 ./source/t/tetex/tetex.amstex.fmtutil.diff.gz
+-rw-r--r--   1 root root       633 2006-05-16 21:40 ./source/t/tetex/tetex.browsers.diff.gz
+-rw-r--r--   1 root root       389 2010-02-19 17:27 ./source/t/tetex/tetex.cpascal.getline.posix.2008.diff.gz
+-rw-r--r--   1 root root       504 2004-09-09 13:25 ./source/t/tetex/tetex.dvipdfm.mkstemp.diff.gz
+-rw-r--r--   1 root root       239 2005-07-18 00:11 ./source/t/tetex/tetex.etex.diff.gz
+-rw-r--r--   1 root root       375 2007-06-28 02:45 ./source/t/tetex/tetex.fontcachedirinhome.diff.gz
+-rw-r--r--   1 root root       478 2010-05-17 18:03 ./source/t/tetex/tetex.leet.diff.gz
+-rw-r--r--   1 root root       580 2010-02-19 17:52 ./source/t/tetex/tetex.png14.diff.gz
+-rw-r--r--   1 root root      2480 2005-02-10 20:29 ./source/t/tetex/tetex.scripts.mktemp.diff.gz
+-rw-r--r--   1 root root       724 2005-11-09 10:00 ./source/t/tetex/tetex.tmp.cleanup.diff.gz
+-rw-r--r--   1 root root       250 2005-02-10 20:29 ./source/t/tetex/tetex.var.fonts.diff.gz
+drwxr-xr-x   2 root root      4096 2010-02-20 01:26 ./source/t/transfig
+-rw-r--r--   1 root root       903 2008-02-11 03:44 ./source/t/transfig/slack-desc
+-rw-r--r--   1 root root       601 2007-02-19 22:21 ./source/t/transfig/transfig.3.2.4-gcc4.patch.gz
+-rw-r--r--   1 root root    326284 2002-12-19 18:38 ./source/t/transfig/transfig.3.2.4.tar.gz
+-rwxr-xr-x   1 root root      3669 2010-02-20 01:27 ./source/t/transfig/transfig.SlackBuild
+-rw-r--r--   1 root root       479 2007-02-19 22:21 ./source/t/transfig/transfig.diff.gz
+-rw-r--r--   1 root root       285 2010-02-20 01:26 ./source/t/transfig/transfig.png14.nodither.diff.gz
+drwxr-xr-x   2 root root      4096 2010-02-20 01:32 ./source/t/xfig
+-rw-r--r--   1 root root       886 2008-02-11 03:44 ./source/t/xfig/slack-desc
+-rw-r--r--   1 root root      3177 2004-02-05 12:49 ./source/t/xfig/xfig-3.2.4-mkstemp.diff.gz
+-rw-r--r--   1 root root       604 2004-02-03 17:52 ./source/t/xfig/xfig.3.2.3d-international-std-fonts.diff.gz
+-rw-r--r--   1 root root       149 2004-02-03 17:53 ./source/t/xfig/xfig.3.2.3d-xcolor.diff.gz
+-rw-r--r--   1 root root       545 2004-02-03 17:51 ./source/t/xfig/xfig.3.2.3d-xim.diff.gz
+-rw-r--r--   1 root root       210 2005-10-06 17:19 ./source/t/xfig/xfig.3.2.4-gcc4.diff.gz
+-rw-r--r--   1 root root      1386 2006-11-16 13:30 ./source/t/xfig/xfig.3.2.4-locale.diff.gz
+-rw-r--r--   1 root root       577 2004-03-22 12:26 ./source/t/xfig/xfig.3.2.4-null.diff.gz
+-rw-r--r--   1 root root      1695 2004-08-25 12:26 ./source/t/xfig/xfig.3.2.4-quiet.diff.gz
+-rw-r--r--   1 root root      1599 2005-10-06 17:19 ./source/t/xfig/xfig.3.2.4-urw-fonts.diff.gz
+-rw-r--r--   1 root root      5582 2008-04-14 04:41 ./source/t/xfig/xfig.3.2.4.diff.gz
+-rw-r--r--   1 root root   3666286 2006-08-15 00:06 ./source/t/xfig/xfig.3.2.4.full.tar.bz2
+-rwxr-xr-x   1 root root      4442 2010-02-21 17:15 ./source/t/xfig/xfig.SlackBuild
+-rw-r--r--   1 root root       288 2007-02-19 09:33 ./source/t/xfig/xfig.docs.location.diff.gz
+-rw-r--r--   1 root root       578 2007-02-19 09:06 ./source/t/xfig/xfig.fig.ad.diff.gz
+-rw-r--r--   1 root root       402 2006-08-14 23:55 ./source/t/xfig/xfig.no.pdf.ref.diff.gz
+-rw-r--r--   1 root root       286 2006-08-15 00:21 ./source/t/xfig/xfig.no.xfig_ref_en.pdf.diff.gz
+-rw-r--r--   1 root root       279 2010-02-20 01:32 ./source/t/xfig/xfig.png14.nodither.diff.gz
+drwxr-xr-x   8 root root      4096 2012-05-25 00:55 ./source/tcl
+drwxr-xr-x   2 root root      4096 2010-08-12 18:35 ./source/tcl/expect
+-rw-r--r--   1 root root    547655 2010-08-12 18:35 ./source/tcl/expect/expect-5.44.1.15.tar.bz2
+-rwxr-xr-x   1 root root      4180 2010-08-12 18:36 ./source/tcl/expect/expect.SlackBuild
+-rw-r--r--   1 root root       221 2009-05-11 21:26 ./source/tcl/expect/expect.exp_main_tk.c.version.require.diff.gz
+-rw-r--r--   1 root root       990 2008-02-11 03:44 ./source/tcl/expect/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/tcl/hfsutils
+-rw-r--r--   1 root root    207697 1998-11-02 23:34 ./source/tcl/hfsutils/hfsutils-3.2.6.tar.gz
+-rw-r--r--   1 root root       286 1998-11-02 23:39 ./source/tcl/hfsutils/hfsutils-3.2.6.tar.gz.sign
+-rwxr-xr-x   1 root root      4765 2010-08-12 18:39 ./source/tcl/hfsutils/hfsutils.SlackBuild
+-rw-r--r--   1 root root       209 2005-07-11 02:18 ./source/tcl/hfsutils/hfsutils.errno.diff.gz
+-rw-r--r--   1 root root       928 2008-02-11 03:44 ./source/tcl/hfsutils/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-25 00:28 ./source/tcl/tcl
+-rw-r--r--   1 root root       713 2002-03-23 23:59 ./source/tcl/tcl/slack-desc
+-rwxr-xr-x   1 root root      3978 2012-05-25 00:29 ./source/tcl/tcl/tcl.SlackBuild
+-rw-r--r--   1 root root   2801672 2011-11-04 12:55 ./source/tcl/tcl/tcl8.5.11-src.tar.xz
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/tcl/tclx
+-rw-r--r--   1 root root      1010 2002-03-24 00:00 ./source/tcl/tclx/slack-desc
+-rw-r--r--   1 root root       353 2007-02-21 04:54 ./source/tcl/tclx/tclx-8.4.configure.diff.gz
+-rw-r--r--   1 root root       270 2007-02-21 04:54 ./source/tcl/tclx/tclx-8.4.gcc4.diff.gz
+-rwxr-xr-x   1 root root      3874 2009-12-07 00:52 ./source/tcl/tclx/tclx.SlackBuild
+-rw-r--r--   1 root root    313595 2006-02-03 15:28 ./source/tcl/tclx/tclx8.4.tar.bz2
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/tcl/tix
+-rw-r--r--   1 root root   1831503 2008-07-28 19:37 ./source/tcl/tix/Tix8.4.3.tar.gz
+-rw-r--r--   1 root root       860 2002-03-24 00:02 ./source/tcl/tix/slack-desc
+-rwxr-xr-x   1 root root      3333 2009-12-07 00:50 ./source/tcl/tix/tix.SlackBuild
+-rw-r--r--   1 root root       236 2006-11-18 04:05 ./source/tcl/tix/tix.soname.patch.gz
+-rw-r--r--   1 root root      1908 2008-09-09 00:46 ./source/tcl/tix/tix.tcl8.5.patch.gz
+drwxr-xr-x   2 root root      4096 2012-05-25 00:30 ./source/tcl/tk
+-rw-r--r--   1 root root       651 2002-03-24 00:03 ./source/tcl/tk/slack-desc
+-rwxr-xr-x   1 root root      3812 2012-05-25 00:31 ./source/tcl/tk/tk.SlackBuild
+-rw-r--r--   1 root root   2415452 2011-11-04 12:55 ./source/tcl/tk/tk8.5.11-src.tar.xz
+drwxr-xr-x  31 root root      4096 2012-08-15 02:02 ./source/x
+drwxr-xr-x   2 root root      4096 2010-08-12 20:45 ./source/x/anthy
+-rw-r--r--   1 root root   3198760 2009-02-07 16:33 ./source/x/anthy/anthy-9100h.tar.xz
+-rwxr-xr-x   1 root root      4287 2010-08-12 20:46 ./source/x/anthy/anthy.SlackBuild
+-rw-r--r--   1 root root       714 2008-02-13 08:13 ./source/x/anthy/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-18 19:44 ./source/x/dejavu-fonts-ttf
+-rw-r--r--   1 root root   2238052 2011-02-27 15:04 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf-2.33.tar.xz
+-rwxr-xr-x   1 root root      2889 2010-10-11 18:10 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild
+-rw-r--r--   1 root root       167 2007-03-24 05:03 ./source/x/dejavu-fonts-ttf/doinst.sh.gz
+-rw-r--r--   1 root root      1003 2008-08-03 19:13 ./source/x/dejavu-fonts-ttf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-03 20:57 ./source/x/fontconfig
+-rw-r--r--   1 root root       149 2009-12-02 03:54 ./source/x/fontconfig/doinst.sh.gz
+-rw-r--r--   1 root root   1058504 2012-07-03 20:45 ./source/x/fontconfig/fontconfig-2.9.0.tar.xz
+-rwxr-xr-x   1 root root      5309 2012-07-03 21:06 ./source/x/fontconfig/fontconfig.SlackBuild
+-rw-r--r--   1 root root       547 2012-07-03 20:57 ./source/x/fontconfig/fontconfig.dejavu.diff.gz
+-rw-r--r--   1 root root       457 2009-12-02 03:49 ./source/x/fontconfig/fontconfig.font.dir.list.diff.gz
+-rw-r--r--   1 root root       657 2007-01-25 05:00 ./source/x/fontconfig/setup.05.fontconfig
+-rw-r--r--   1 root root       809 2006-07-22 02:47 ./source/x/fontconfig/slack-desc
+drwxr-xr-x   2 root root      4096 2012-02-13 00:07 ./source/x/freeglut
+-rw-r--r--   1 root root       444 2012-02-13 00:02 ./source/x/freeglut/RATIONALE
+-rw-r--r--   1 root root    501480 2012-01-02 12:59 ./source/x/freeglut/freeglut-2.8.0.tar.xz
+-rwxr-xr-x   1 root root      2926 2012-05-03 01:51 ./source/x/freeglut/freeglut.SlackBuild
+-rw-r--r--   1 root root       966 2012-02-13 00:10 ./source/x/freeglut/slack-desc
+drwxr-xr-x   2 root root      4096 2010-11-04 23:55 ./source/x/glew
+-rw-r--r--   1 root root    286588 2010-11-03 20:55 ./source/x/glew/glew-1.5.7.tar.xz
+-rwxr-xr-x   1 root root      3009 2010-11-04 23:55 ./source/x/glew/glew.SlackBuild
+-rw-r--r--   1 root root        81 2010-08-12 21:52 ./source/x/glew/glew.url
+-rw-r--r--   1 root root       840 2009-07-23 06:21 ./source/x/glew/slack-desc
+drwxr-xr-x   2 root root      4096 2012-04-10 03:33 ./source/x/libdrm
+-rw-r--r--   1 root root    372264 2012-03-28 21:25 ./source/x/libdrm/libdrm-2.4.33.tar.xz
+-rwxr-xr-x   1 root root      3593 2012-04-10 03:35 ./source/x/libdrm/libdrm.SlackBuild
+-rw-r--r--   1 root root       717 2007-02-01 01:33 ./source/x/libdrm/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-23 16:15 ./source/x/liberation-fonts-ttf
+-rw-r--r--   1 root root      1123 2011-03-23 05:07 ./source/x/liberation-fonts-ttf/60-liberation.conf
+-rw-r--r--   1 root root       167 2007-03-24 05:03 ./source/x/liberation-fonts-ttf/doinst.sh.gz
+-rw-r--r--   1 root root   1332098 2012-03-05 03:50 ./source/x/liberation-fonts-ttf/liberation-fonts-ttf-1.07.2.tar.gz
+-rwxr-xr-x   1 root root      2570 2012-06-23 16:15 ./source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild
+-rw-r--r--   1 root root      1042 2008-01-02 05:15 ./source/x/liberation-fonts-ttf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-12 03:25 ./source/x/libhangul
+-rw-r--r--   1 root root   2148068 2011-10-30 11:43 ./source/x/libhangul/libhangul-0.1.0.tar.xz
+-rwxr-xr-x   1 root root      4459 2012-05-12 03:27 ./source/x/libhangul/libhangul.SlackBuild
+-rw-r--r--   1 root root       844 2012-05-12 03:24 ./source/x/libhangul/slack-desc
+drwxr-xr-x   2 root root      4096 2010-08-12 22:42 ./source/x/m17n-lib
+-rw-r--r--   1 root root    926952 2010-04-19 06:50 ./source/x/m17n-lib/m17n-db-1.6.1.tar.xz
+-rw-r--r--   1 root root    670440 2010-04-26 07:47 ./source/x/m17n-lib/m17n-lib-1.6.1.tar.xz
+-rwxr-xr-x   1 root root      5665 2010-08-12 22:43 ./source/x/m17n-lib/m17n-lib.SlackBuild
+-rw-r--r--   1 root root       875 2008-02-13 08:20 ./source/x/m17n-lib/slack-desc
+drwxr-xr-x   3 root root      4096 2012-07-10 19:18 ./source/x/mesa
+-rw-r--r--   1 root root   4818768 2012-07-10 16:01 ./source/x/mesa/MesaLib-8.0.4.tar.xz
+-rw-r--r--   1 root root       352 2008-03-10 07:13 ./source/x/mesa/README.GIT
+-rwxr-xr-x   1 root root       732 2011-02-05 21:09 ./source/x/mesa/get-mesa.sh
+-rw-r--r--   1 root root   7168504 2010-10-01 05:04 ./source/x/mesa/mesa-demos-8.0.1.tar.xz
+-rwxr-xr-x   1 root root      4890 2012-07-10 19:19 ./source/x/mesa/mesa.SlackBuild
+-rw-r--r--   1 root root        78 2010-10-01 04:23 ./source/x/mesa/mesa.url
+drwxr-xr-x   2 root root      4096 2012-07-10 19:17 ./source/x/mesa/patches
+-rw-r--r--   1 root root       790 2007-02-05 00:06 ./source/x/mesa/slack-desc
+drwxr-xr-x   2 root root      4096 2012-03-16 12:47 ./source/x/mtdev
+-rw-r--r--   1 root root    220224 2012-02-20 15:10 ./source/x/mtdev/mtdev-1.1.2.tar.xz
+-rwxr-xr-x   1 root root      2782 2012-03-16 12:47 ./source/x/mtdev/mtdev.SlackBuild
+-rw-r--r--   1 root root        31 2012-03-16 12:43 ./source/x/mtdev/mtdev.url
+-rw-r--r--   1 root root      1073 2012-03-16 12:42 ./source/x/mtdev/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/sazanami-fonts-ttf
+-rw-r--r--   1 root root   8622710 2004-06-29 13:55 ./source/x/sazanami-fonts-ttf/sazanami-20040629.tar.bz2
+-rwxr-xr-x   1 root root      3319 2009-05-19 20:05 ./source/x/sazanami-fonts-ttf/sazanami-fonts-ttf.SlackBuild
+-rw-r--r--   1 root root       872 2008-02-12 06:53 ./source/x/sazanami-fonts-ttf/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-15 02:03 ./source/x/scim
+drwxr-xr-x   2 root root      4096 2009-06-10 01:42 ./source/x/scim-anthy
+-rw-r--r--   1 root root    649495 2007-05-21 08:47 ./source/x/scim-anthy/scim-anthy-1.2.4.tar.gz
+-rwxr-xr-x   1 root root      3983 2012-01-12 19:00 ./source/x/scim-anthy/scim-anthy.SlackBuild
+-rw-r--r--   1 root root       553 2009-06-10 01:42 ./source/x/scim-anthy/scim-anthy.gcc43.diff.gz
+-rw-r--r--   1 root root       969 2008-02-13 08:28 ./source/x/scim-anthy/slack-desc
+drwxr-xr-x   3 root root      4096 2011-03-19 23:17 ./source/x/scim-bridge
+drwxr-xr-x   2 root root      4096 2011-03-19 23:17 ./source/x/scim-bridge/patches
+-rw-r--r--   1 root root       326 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch.gz
+-rw-r--r--   1 root root       876 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-imcontext.cpp.patch.gz
+-rw-r--r--   1 root root       407 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-imcontext.h.patch.gz
+-rw-r--r--   1 root root       648 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent.cpp.patch.gz
+-rw-r--r--   1 root root       758 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-client-imcontext-gtk.c.patch.gz
+-rw-r--r--   1 root root       419 2011-03-19 23:05 ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-client-imcontext-qt.cpp.patch.gz
+-rw-r--r--   1 root root    508870 2009-04-19 04:08 ./source/x/scim-bridge/scim-bridge-0.4.16.tar.gz
+-rwxr-xr-x   1 root root      5418 2012-01-12 19:00 ./source/x/scim-bridge/scim-bridge.SlackBuild
+-rw-r--r--   1 root root       967 2008-02-13 09:11 ./source/x/scim-bridge/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-12 03:54 ./source/x/scim-hangul
+-rw-r--r--   1 root root   1176577 2007-12-30 07:57 ./source/x/scim-hangul/scim-hangul-0.3.2.tar.gz
+-rwxr-xr-x   1 root root      4045 2012-05-12 03:54 ./source/x/scim-hangul/scim-hangul.SlackBuild
+-rw-r--r--   1 root root       278 2009-06-10 01:50 ./source/x/scim-hangul/scim-hangul.gcc43.diff.gz
+-rw-r--r--   1 root root       181 2012-05-12 03:54 ./source/x/scim-hangul/scim-hangul.gcc47.diff.gz
+-rw-r--r--   1 root root      1073 2008-02-04 12:34 ./source/x/scim-hangul/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:42 ./source/x/scim-input-pad
+-rw-r--r--   1 root root    442263 2009-04-19 04:09 ./source/x/scim-input-pad/scim-input-pad-0.1.2.tar.bz2
+-rwxr-xr-x   1 root root      3728 2012-01-12 19:00 ./source/x/scim-input-pad/scim-input-pad.SlackBuild
+-rw-r--r--   1 root root       821 2012-07-22 17:17 ./source/x/scim-input-pad/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/scim-m17n
+-rw-r--r--   1 root root    355801 2009-04-19 04:11 ./source/x/scim-m17n/scim-m17n-0.2.3.tar.gz
+-rwxr-xr-x   1 root root      4231 2012-01-12 19:00 ./source/x/scim-m17n/scim-m17n.SlackBuild
+-rw-r--r--   1 root root       862 2008-02-13 09:16 ./source/x/scim-m17n/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/scim-pinyin
+-rw-r--r--   1 root root   5492055 2005-08-12 01:44 ./source/x/scim-pinyin/scim-pinyin-0.5.91.tar.gz
+-rwxr-xr-x   1 root root      4318 2012-01-12 19:00 ./source/x/scim-pinyin/scim-pinyin.SlackBuild
+-rw-r--r--   1 root root       448 2009-03-16 13:59 ./source/x/scim-pinyin/scim-pinyin.gcc43.diff.gz
+-rw-r--r--   1 root root       848 2008-02-13 09:19 ./source/x/scim-pinyin/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:42 ./source/x/scim-tables
+-rw-r--r--   1 root root   7256429 2009-01-25 03:06 ./source/x/scim-tables/scim-tables-0.5.9.tar.gz
+-rwxr-xr-x   1 root root      4086 2012-01-12 19:00 ./source/x/scim-tables/scim-tables.SlackBuild
+-rw-r--r--   1 root root       751 2008-02-13 09:25 ./source/x/scim-tables/slack-desc
+-rw-r--r--   1 root root    836596 2012-06-22 14:29 ./source/x/scim/scim-1.4.14.tar.xz
+-rw-r--r--   1 root root      1411 2007-10-28 14:28 ./source/x/scim/scim-setup.desktop
+-rwxr-xr-x   1 root root      9383 2012-09-10 18:42 ./source/x/scim/scim.SlackBuild
+-rw-r--r--   1 root root       423 2008-03-31 21:12 ./source/x/scim/scim.desktop
+-rw-r--r--   1 root root       785 2008-02-16 23:16 ./source/x/scim/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/sinhala_lklug-font-ttf
+-rwxr-xr-x   1 root root      3389 2009-05-19 20:05 ./source/x/sinhala_lklug-font-ttf/sinhala_lklug-font-ttf.SlackBuild
+-rw-r--r--   1 root root    300476 2006-09-29 19:19 ./source/x/sinhala_lklug-font-ttf/sinhala_lklug.ttf
+-rw-r--r--   1 root root       946 2008-02-12 06:59 ./source/x/sinhala_lklug-font-ttf/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/tibmachuni-font-ttf
+-rw-r--r--   1 root root   1676199 2010-03-02 16:40 ./source/x/tibmachuni-font-ttf/TibetanMachineUnicodeFont.zip
+-rw-r--r--   1 root root      1031 2008-02-16 02:42 ./source/x/tibmachuni-font-ttf/slack-desc
+-rwxr-xr-x   1 root root      3833 2010-11-05 00:29 ./source/x/tibmachuni-font-ttf/tibmachuni-font-ttf.SlackBuild
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/ttf-indic-fonts
+-rw-r--r--   1 root root      6168 2005-05-14 06:49 ./source/x/ttf-indic-fonts/COPYING.bz2
+-rw-r--r--   1 root root     33862 2006-01-30 12:58 ./source/x/ttf-indic-fonts/Samyak_Malayalam.ttf.bz2
+-rw-r--r--   1 root root       122 2006-09-21 08:00 ./source/x/ttf-indic-fonts/Samyak_Malayalam.url
+-rw-r--r--   1 root root       170 2007-04-22 20:40 ./source/x/ttf-indic-fonts/doinst.sh.gz
+-rw-r--r--   1 root root      1087 2006-09-21 08:19 ./source/x/ttf-indic-fonts/slack-desc
+-rw-r--r--   1 root root   2925975 2006-12-26 08:32 ./source/x/ttf-indic-fonts/ttf-indic-fonts-0.4.7.4.tar.bz2
+-rwxr-xr-x   1 root root      3351 2009-05-19 20:05 ./source/x/ttf-indic-fonts/ttf-indic-fonts.SlackBuild
+-rw-r--r--   1 root root       757 2006-09-21 07:19 ./source/x/ttf-indic-fonts/ttf-indic-fonts.copyright.diff.gz
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/x/wqy-zenhei-font-ttf
+-rw-r--r--   1 root root      1156 2008-02-20 01:44 ./source/x/wqy-zenhei-font-ttf/slack-desc
+-rw-r--r--   1 root root   6649596 2009-04-20 19:06 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-0.8.38-1.tar.bz2
+-rwxr-xr-x   1 root root      3953 2009-05-19 20:05 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-font-ttf.SlackBuild
+drwxr-xr-x  10 root root      4096 2012-05-21 17:53 ./source/x/x11
+drwxr-xr-x   4 root root      4096 2011-03-14 03:32 ./source/x/x11-skel
+-rw-r--r--   1 root root       576 2011-03-14 03:32 ./source/x/x11-skel/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2007-02-14 19:32 ./source/x/x11-skel/manpages
+-rw-r--r--   1 root root      1060 2002-05-31 22:23 ./source/x/x11-skel/manpages/xwmconfig.1
+drwxr-xr-x   2 root root      4096 2012-08-09 05:46 ./source/x/x11-skel/scripts
+-rw-r--r--   1 root root       358 2006-08-10 03:33 ./source/x/x11-skel/scripts/setup.xwmconfig
+-rw-r--r--   1 root root     17100 2007-02-12 21:14 ./source/x/x11-skel/scripts/xorg.conf-fbdev
+-rw-r--r--   1 root root     15858 2007-02-12 21:14 ./source/x/x11-skel/scripts/xorg.conf-vesa
+-rw-r--r--   1 root root     12785 2006-08-21 01:53 ./source/x/x11-skel/scripts/xorgsetup
+-rw-r--r--   1 root root      7698 2012-08-09 05:44 ./source/x/x11-skel/scripts/xwmconfig
+-rw-r--r--   1 root root      1066 2007-05-28 21:04 ./source/x/x11-skel/slack-desc
+-rwxr-xr-x   1 root root      2596 2012-08-09 05:32 ./source/x/x11-skel/x11-skel.SlackBuild
+-rw-r--r--   1 root root       183 2009-05-30 01:47 ./source/x/x11/arch.use.flags
+drwxr-xr-x   2 root root      4096 2012-08-23 15:57 ./source/x/x11/build
+-rw-r--r--   1 root root         2 2009-06-03 02:17 ./source/x/x11/build/gccmakedep
+-rw-r--r--   1 root root         2 2012-05-21 17:54 ./source/x/x11/build/libXaw3d
+-rw-r--r--   1 root root         2 2012-06-19 19:27 ./source/x/x11/build/xcb-proto
+-rw-r--r--   1 root root         2 2012-05-21 17:55 ./source/x/x11/build/xdm
+-rw-r--r--   1 root root         2 2012-05-22 04:11 ./source/x/x11/build/xf86-input-wacom
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-apm
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-chips
+-rw-r--r--   1 root root         2 2011-07-12 14:50 ./source/x/x11/build/xf86-video-i740
+-rw-r--r--   1 root root         2 2011-07-12 14:50 ./source/x/x11/build/xf86-video-s3
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-sisusb
+-rw-r--r--   1 root root         2 2011-07-12 14:50 ./source/x/x11/build/xf86-video-tga
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-tseng
+-rw-r--r--   1 root root         2 2011-07-12 14:51 ./source/x/x11/build/xf86-video-v4l
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-voodoo
+-rw-r--r--   1 root root         2 2011-07-12 14:55 ./source/x/x11/build/xf86-video-xgi
+-rw-r--r--   1 root root         2 2012-08-23 15:57 ./source/x/x11/build/xorg-server
+-rw-r--r--   1 root root         2 2012-06-19 20:07 ./source/x/x11/build/xpyb
+drwxr-xr-x   2 root root      4096 2012-05-21 17:51 ./source/x/x11/configure
+-rw-r--r--   1 root root       392 2012-03-16 18:08 ./source/x/x11/configure/compiz
+-rw-r--r--   1 root root       317 2010-11-05 06:13 ./source/x/x11/configure/configure
+-rw-r--r--   1 root root       341 2010-11-13 18:36 ./source/x/x11/configure/font-bh-ttf
+-rw-r--r--   1 root root       297 2009-10-20 04:17 ./source/x/x11/configure/font-util
+-rw-r--r--   1 root root       320 2010-11-13 20:17 ./source/x/x11/configure/gccmakedep
+-rw-r--r--   1 root root       317 2010-12-04 23:25 ./source/x/x11/configure/libX11
+-rw-r--r--   1 root root       440 2012-05-21 17:51 ./source/x/x11/configure/libXaw3d
+-rw-r--r--   1 root root       320 2010-11-13 19:40 ./source/x/x11/configure/libXp
+-rw-r--r--   1 root root       304 2008-10-14 22:51 ./source/x/x11/configure/libXt
+-rw-r--r--   1 root root       384 2009-07-10 03:05 ./source/x/x11/configure/pixman
+-rw-r--r--   1 root root       276 2009-07-24 04:25 ./source/x/x11/configure/setxkbmap
+-rw-r--r--   1 root root       421 2010-05-02 00:36 ./source/x/x11/configure/xf86-input-vmmouse
+-rw-r--r--   1 root root       262 2010-12-13 03:07 ./source/x/x11/configure/xf86-video-nouveau
+-rw-r--r--   1 root root       282 2009-08-01 03:17 ./source/x/x11/configure/xfs
+-rw-r--r--   1 root root       276 2009-07-24 04:28 ./source/x/x11/configure/xkbcomp
+-rw-r--r--   1 root root       345 2008-10-14 22:51 ./source/x/x11/configure/xkeyboard-config
+-rw-r--r--   1 root root       377 2010-12-19 06:52 ./source/x/x11/configure/xorg-docs
+-rw-r--r--   1 root root      1409 2012-08-23 15:58 ./source/x/x11/configure/xorg-server
+drwxr-xr-x   2 root root      4096 2009-08-01 05:00 ./source/x/x11/doinst.sh
+-rw-r--r--   1 root root       237 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-100dpi
+-rw-r--r--   1 root root       236 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-75dpi
+-rw-r--r--   1 root root       237 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-utopia-100dpi
+-rw-r--r--   1 root root       236 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-utopia-75dpi
+-rw-r--r--   1 root root       236 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-utopia-type1
+-rw-r--r--   1 root root       301 2007-03-24 04:06 ./source/x/x11/doinst.sh/font-arabic-misc
+-rw-r--r--   1 root root       237 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-100dpi
+-rw-r--r--   1 root root       236 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-75dpi
+-rw-r--r--   1 root root       237 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-lucidatypewriter-100dpi
+-rw-r--r--   1 root root       236 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-lucidatypewriter-75dpi
+-rw-r--r--   1 root root       234 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-ttf
+-rw-r--r--   1 root root       236 2007-03-24 04:00 ./source/x/x11/doinst.sh/font-bh-type1
+-rw-r--r--   1 root root       237 2007-03-24 04:01 ./source/x/x11/doinst.sh/font-bitstream-100dpi
+-rw-r--r--   1 root root       236 2007-03-24 04:01 ./source/x/x11/doinst.sh/font-bitstream-75dpi
+-rw-r--r--   1 root root       237 2007-03-24 04:02 ./source/x/x11/doinst.sh/font-bitstream-speedo
+-rw-r--r--   1 root root       236 2007-03-24 04:02 ./source/x/x11/doinst.sh/font-bitstream-type1
+-rw-r--r--   1 root root       239 2007-03-24 04:03 ./source/x/x11/doinst.sh/font-cronyx-cyrillic
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-cursor-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-daewoo-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-dec-misc
+-rw-r--r--   1 root root       236 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-ibm-type1
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-isas-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-jis-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:07 ./source/x/x11/doinst.sh/font-micro-misc
+-rw-r--r--   1 root root       239 2007-03-24 04:04 ./source/x/x11/doinst.sh/font-misc-cyrillic
+-rw-r--r--   1 root root       300 2007-03-24 04:04 ./source/x/x11/doinst.sh/font-misc-ethiopic
+-rw-r--r--   1 root root       234 2007-03-24 04:04 ./source/x/x11/doinst.sh/font-misc-meltho
+-rw-r--r--   1 root root       301 2007-03-24 04:04 ./source/x/x11/doinst.sh/font-misc-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:05 ./source/x/x11/doinst.sh/font-mutt-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:05 ./source/x/x11/doinst.sh/font-schumacher-misc
+-rw-r--r--   1 root root       239 2007-03-24 04:05 ./source/x/x11/doinst.sh/font-screen-cyrillic
+-rw-r--r--   1 root root       301 2007-03-24 04:05 ./source/x/x11/doinst.sh/font-sony-misc
+-rw-r--r--   1 root root       301 2007-03-24 04:06 ./source/x/x11/doinst.sh/font-sun-misc
+-rw-r--r--   1 root root       239 2007-03-24 04:06 ./source/x/x11/doinst.sh/font-winitzki-cyrillic
+-rw-r--r--   1 root root       236 2007-03-24 04:06 ./source/x/x11/doinst.sh/font-xfree86-type1
+-rw-r--r--   1 root root       553 2012-05-10 04:56 ./source/x/x11/doinst.sh/xdm
+-rw-r--r--   1 root root       377 2009-08-01 05:01 ./source/x/x11/doinst.sh/xfs
+-rw-r--r--   1 root root       176 2007-07-01 03:16 ./source/x/x11/doinst.sh/xinit
+-rw-r--r--   1 root root       247 2007-06-09 21:54 ./source/x/x11/doinst.sh/xkeyboard-config
+-rw-r--r--   1 root root       212 2007-02-13 20:05 ./source/x/x11/doinst.sh/xorg-cf-files
+drwxr-xr-x   2 root root      4096 2009-05-30 01:47 ./source/x/x11/makepkg
+-rw-r--r--   1 root root      2198 2009-06-03 04:55 ./source/x/x11/makepkg/xorg-server
+-rw-r--r--   1 root root      3275 2012-04-08 04:56 ./source/x/x11/modularize
+-rw-r--r--   1 root root      1220 2012-05-09 18:58 ./source/x/x11/noarch
+-rw-r--r--   1 root root       726 2009-06-08 22:38 ./source/x/x11/package-blacklist
+drwxr-xr-x   5 root root      4096 2012-06-13 04:53 ./source/x/x11/patch
+-rw-r--r--   1 root root       326 2010-11-13 18:39 ./source/x/x11/patch/README
+drwxr-xr-x   2 root root      4096 2011-03-03 03:14 ./source/x/x11/patch/xcompmgr
+-rw-r--r--   1 root root       154 2011-03-03 03:15 ./source/x/x11/patch/xcompmgr.patch
+-rw-r--r--   1 root root       464 2011-03-03 03:11 ./source/x/x11/patch/xcompmgr/xcompmgr-follow-icccm-spec.diff.gz
+drwxr-xr-x   2 root root      4096 2012-03-17 15:12 ./source/x/x11/patch/xf86-video-chips
+-rw-r--r--   1 root root       176 2012-03-17 15:12 ./source/x/x11/patch/xf86-video-chips.patch
+-rw-r--r--   1 root root     22795 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0001-chips-gut-the-overlay-8-16-support-from-driver.patch
+-rw-r--r--   1 root root       797 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0002-PciTag-is-unused-when-using-libpciaccess.patch
+-rw-r--r--   1 root root      1217 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0003-Use-malloc-calloc-realloc-free-directly.patch
+-rw-r--r--   1 root root       670 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0004-configure.ac-Remove-AM_PROG_CC_C_O.patch
+-rw-r--r--   1 root root      6501 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0005-util-Consolidate-common-macros.patch
+-rw-r--r--   1 root root       948 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0006-Fix-implicit-declaration-of-iopl.patch
+-rw-r--r--   1 root root      1530 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0007-Build-fix-for-ABI-Version-12.patch
+-rw-r--r--   1 root root       901 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0008-Fall-back-to-shadowfb-if-XAA-is-unavailable.patch
+-rw-r--r--   1 root root       692 2012-03-17 15:10 ./source/x/x11/patch/xf86-video-chips/0009-Fix-for-new-vgaHW-ABI.patch
+drwxr-xr-x   2 root root      4096 2012-04-14 03:02 ./source/x/x11/patch/xorg-server
+-rw-r--r--   1 root root       148 2012-04-14 03:02 ./source/x/x11/patch/xorg-server.patch
+-rw-r--r--   1 root root       340 2012-04-14 03:01 ./source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff.gz
+drwxr-xr-x  10 root root      4096 2012-05-04 04:30 ./source/x/x11/post-install
+-rw-r--r--   1 root root       357 2007-02-16 21:17 ./source/x/x11/post-install/beforelight.post-install
+-rw-r--r--   1 root root       275 2007-02-14 02:06 ./source/x/x11/post-install/encodings.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-100dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-75dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-utopia-100dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-utopia-75dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-utopia-type1.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-alias.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-arabic-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-100dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-75dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-lucidatypewriter-100dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-lucidatypewriter-75dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-ttf.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bh-type1.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bitstream-100dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bitstream-75dpi.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bitstream-speedo.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-bitstream-type1.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-cronyx-cyrillic.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-cursor-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-daewoo-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-dec-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-ibm-type1.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-isas-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-jis-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-micro-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-misc-cyrillic.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-misc-ethiopic.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-misc-meltho.post-install
+-rw-r--r--   1 root root       664 2008-02-01 03:22 ./source/x/x11/post-install/font-misc-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-mutt-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-schumacher-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-screen-cyrillic.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-sony-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-sun-misc.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-util.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-winitzki-cyrillic.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/font-xfree86-type1.post-install
+-rw-r--r--   1 root root        58 2010-11-05 06:08 ./source/x/x11/post-install/libSM.post-install
+drwxr-xr-x   2 root root      4096 2011-04-16 03:28 ./source/x/x11/post-install/libX11
+-rw-r--r--   1 root root       102 2011-04-16 03:30 ./source/x/x11/post-install/libX11.post-install
+-rw-r--r--   1 root root      3050 2010-02-22 20:04 ./source/x/x11/post-install/libX11/XKeysymDB.gz
+-rw-r--r--   1 root root      1765 2009-06-08 19:45 ./source/x/x11/post-install/libXaw.post-install
+-rw-r--r--   1 root root      1246 2012-05-04 04:35 ./source/x/x11/post-install/libXaw3d.post-install
+-rw-r--r--   1 root root       183 2007-02-14 06:42 ./source/x/x11/post-install/libpthread-stubs.post-install
+-rw-r--r--   1 root root      2320 2009-06-03 04:06 ./source/x/x11/post-install/libxcb.post-install
+drwxr-xr-x   2 root root      4096 2007-03-24 04:12 ./source/x/x11/post-install/mkfontdir
+-rw-r--r--   1 root root       221 2007-03-24 04:13 ./source/x/x11/post-install/mkfontdir.post-install
+-rw-r--r--   1 root root      1012 2007-03-23 20:46 ./source/x/x11/post-install/mkfontdir/setup.04.mkfontdir
+-rw-r--r--   1 root root       286 2008-04-26 21:33 ./source/x/x11/post-install/pixman.post-install
+drwxr-xr-x   2 root root      4096 2007-02-22 01:03 ./source/x/x11/post-install/twm
+-rw-r--r--   1 root root       175 2007-02-22 01:05 ./source/x/x11/post-install/twm.post-install
+-rw-r--r--   1 root root       725 2009-12-01 07:39 ./source/x/x11/post-install/twm/xinitrc.twm
+-rw-r--r--   1 root root       344 2007-02-13 23:28 ./source/x/x11/post-install/x11-app-test.post-install
+-rw-r--r--   1 root root       275 2007-02-13 21:50 ./source/x/x11/post-install/x11-font.post-install
+-rw-r--r--   1 root root        68 2007-02-13 21:50 ./source/x/x11/post-install/x11-util.post-install
+-rw-r--r--   1 root root        63 2009-12-15 01:10 ./source/x/x11/post-install/xbitmaps.post-install
+-rw-r--r--   1 root root       155 2007-02-14 06:42 ./source/x/x11/post-install/xcb-proto.post-install
+-rw-r--r--   1 root root       342 2012-05-03 19:24 ./source/x/x11/post-install/xcb-util.post-install
+drwxr-xr-x   2 root root      4096 2007-02-14 01:08 ./source/x/x11/post-install/xdm
+-rw-r--r--   1 root root      1003 2012-05-10 04:55 ./source/x/x11/post-install/xdm.post-install
+-rwxr-xr-x   1 root root      5470 2011-01-23 19:01 ./source/x/x11/post-install/xdm/Xsession
+-rwxr-xr-x   1 root root       708 2001-02-17 22:27 ./source/x/x11/post-install/xdm/Xsession.orig
+-rwxr-xr-x   1 root root       503 2007-02-14 01:22 ./source/x/x11/post-install/xdm/Xsetup_0
+-rwxr-xr-x   1 root root       145 2007-02-13 06:04 ./source/x/x11/post-install/xdm/Xsetup_0.orig
+-rw-r--r--   1 root root        40 2008-09-15 22:43 ./source/x/x11/post-install/xf86-input-joystick.post-install
+drwxr-xr-x   2 root root      4096 2010-08-03 04:04 ./source/x/x11/post-install/xf86-input-synaptics
+-rw-r--r--   1 root root       373 2010-08-03 04:23 ./source/x/x11/post-install/xf86-input-synaptics.post-install
+-rw-r--r--   1 root root       444 2010-11-01 01:13 ./source/x/x11/post-install/xf86-input-synaptics/50-synaptics.conf
+drwxr-xr-x   2 root root      4096 2011-07-12 18:18 ./source/x/x11/post-install/xf86-input-wacom
+-rw-r--r--   1 root root       250 2012-05-22 04:11 ./source/x/x11/post-install/xf86-input-wacom.post-install
+-rw-r--r--   1 root root       384 2011-07-12 18:20 ./source/x/x11/post-install/xf86-input-wacom/60-wacom.rules
+-rw-r--r--   1 root root        54 2009-08-01 05:00 ./source/x/x11/post-install/xfs.post-install
+drwxr-xr-x   2 root root      4096 2007-07-01 03:06 ./source/x/x11/post-install/xinit
+-rw-r--r--   1 root root       637 2007-07-01 03:13 ./source/x/x11/post-install/xinit.post-install
+-rw-r--r--   1 root root       321 2003-03-16 21:36 ./source/x/x11/post-install/xinit/README.Xmodmap
+-rw-r--r--   1 root root       341 2007-02-18 03:51 ./source/x/x11/post-install/xkeyboard-config.post-install
+drwxr-xr-x   2 root root      4096 2009-08-11 03:27 ./source/x/x11/post-install/xorg-cf-files
+-rw-r--r--   1 root root       237 2009-08-11 03:32 ./source/x/x11/post-install/xorg-cf-files.post-install
+-rw-r--r--   1 root root       203 2009-08-11 03:26 ./source/x/x11/post-install/xorg-cf-files/x11.tmpl.lib64.kludge.diff.gz
+-rw-r--r--   1 root root      2241 2010-12-29 01:53 ./source/x/x11/post-install/xorg-server.post-install
+-rw-r--r--   1 root root        63 2010-12-19 06:16 ./source/x/x11/post-install/xorg-sgml-doctools.post-install
+-rw-r--r--   1 root root        35 2010-11-05 06:10 ./source/x/x11/post-install/xproto.post-install
+-rw-r--r--   1 root root       100 2007-02-13 23:26 ./source/x/x11/post-install/xsm.post-install
+drwxr-xr-x   2 root root     12288 2012-06-13 15:32 ./source/x/x11/slack-desc
+-rw-r--r--   1 root root       805 2012-04-07 23:40 ./source/x/x11/slack-desc/appres
+-rw-r--r--   1 root root       936 2012-04-07 23:40 ./source/x/x11/slack-desc/bdftopcf
+-rw-r--r--   1 root root       925 2012-04-07 23:41 ./source/x/x11/slack-desc/beforelight
+-rw-r--r--   1 root root       857 2012-04-08 01:03 ./source/x/x11/slack-desc/bigreqsproto
+-rw-r--r--   1 root root       667 2012-04-07 23:41 ./source/x/x11/slack-desc/bitmap
+-rw-r--r--   1 root root       821 2012-04-08 01:02 ./source/x/x11/slack-desc/compiz
+-rw-r--r--   1 root root       882 2012-04-08 01:19 ./source/x/x11/slack-desc/compositeproto
+-rw-r--r--   1 root root       837 2012-04-08 01:20 ./source/x/x11/slack-desc/damageproto
+-rw-r--r--   1 root root       812 2012-04-08 01:20 ./source/x/x11/slack-desc/dmxproto
+-rw-r--r--   1 root root       826 2012-04-08 01:21 ./source/x/x11/slack-desc/dri2proto
+-rw-r--r--   1 root root       763 2012-04-08 01:21 ./source/x/x11/slack-desc/editres
+-rw-r--r--   1 root root       790 2012-04-08 01:22 ./source/x/x11/slack-desc/encodings
+-rw-r--r--   1 root root       802 2012-04-08 01:22 ./source/x/x11/slack-desc/evieext
+-rw-r--r--   1 root root       824 2012-04-08 01:22 ./source/x/x11/slack-desc/fixesproto
+-rw-r--r--   1 root root       904 2012-04-08 01:23 ./source/x/x11/slack-desc/font-adobe-100dpi
+-rw-r--r--   1 root root       890 2012-04-08 01:23 ./source/x/x11/slack-desc/font-adobe-75dpi
+-rw-r--r--   1 root root      1002 2012-04-08 01:23 ./source/x/x11/slack-desc/font-adobe-utopia-100dpi
+-rw-r--r--   1 root root       988 2012-04-08 01:23 ./source/x/x11/slack-desc/font-adobe-utopia-75dpi
+-rw-r--r--   1 root root       990 2012-04-08 01:24 ./source/x/x11/slack-desc/font-adobe-utopia-type1
+-rw-r--r--   1 root root       802 2012-04-08 01:25 ./source/x/x11/slack-desc/font-alias
+-rw-r--r--   1 root root       890 2012-04-08 02:11 ./source/x/x11/slack-desc/font-arabic-misc
+-rw-r--r--   1 root root       862 2012-04-08 02:11 ./source/x/x11/slack-desc/font-bh-100dpi
+-rw-r--r--   1 root root       848 2012-04-08 02:11 ./source/x/x11/slack-desc/font-bh-75dpi
+-rw-r--r--   1 root root      1100 2012-04-08 02:11 ./source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi
+-rw-r--r--   1 root root      1086 2012-04-08 02:11 ./source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi
+-rw-r--r--   1 root root       822 2012-04-08 02:11 ./source/x/x11/slack-desc/font-bh-ttf
+-rw-r--r--   1 root root       850 2012-04-08 02:12 ./source/x/x11/slack-desc/font-bh-type1
+-rw-r--r--   1 root root       960 2012-04-08 02:13 ./source/x/x11/slack-desc/font-bitstream-100dpi
+-rw-r--r--   1 root root       946 2012-04-08 02:13 ./source/x/x11/slack-desc/font-bitstream-75dpi
+-rw-r--r--   1 root root       962 2012-04-08 02:13 ./source/x/x11/slack-desc/font-bitstream-speedo
+-rw-r--r--   1 root root       948 2012-04-08 02:14 ./source/x/x11/slack-desc/font-bitstream-type1
+-rw-r--r--   1 root root       946 2012-04-08 02:15 ./source/x/x11/slack-desc/font-cronyx-cyrillic
+-rw-r--r--   1 root root       890 2012-04-08 02:15 ./source/x/x11/slack-desc/font-cursor-misc
+-rw-r--r--   1 root root       890 2012-04-08 02:15 ./source/x/x11/slack-desc/font-daewoo-misc
+-rw-r--r--   1 root root       848 2012-04-08 02:15 ./source/x/x11/slack-desc/font-dec-misc
+-rw-r--r--   1 root root       864 2012-04-08 02:16 ./source/x/x11/slack-desc/font-ibm-type1
+-rw-r--r--   1 root root       862 2012-04-08 02:17 ./source/x/x11/slack-desc/font-isas-misc
+-rw-r--r--   1 root root       848 2012-04-08 02:17 ./source/x/x11/slack-desc/font-jis-misc
+-rw-r--r--   1 root root       876 2012-04-08 02:17 ./source/x/x11/slack-desc/font-micro-misc
+-rw-r--r--   1 root root       918 2012-04-08 02:17 ./source/x/x11/slack-desc/font-misc-cyrillic
+-rw-r--r--   1 root root       918 2012-04-08 02:17 ./source/x/x11/slack-desc/font-misc-ethiopic
+-rw-r--r--   1 root root       890 2012-04-08 02:17 ./source/x/x11/slack-desc/font-misc-meltho
+-rw-r--r--   1 root root       862 2012-04-08 02:17 ./source/x/x11/slack-desc/font-misc-misc
+-rw-r--r--   1 root root       862 2012-04-08 02:17 ./source/x/x11/slack-desc/font-mutt-misc
+-rw-r--r--   1 root root       946 2012-04-08 02:17 ./source/x/x11/slack-desc/font-schumacher-misc
+-rw-r--r--   1 root root       946 2012-04-08 02:18 ./source/x/x11/slack-desc/font-screen-cyrillic
+-rw-r--r--   1 root root       862 2012-04-08 02:17 ./source/x/x11/slack-desc/font-sony-misc
+-rw-r--r--   1 root root       848 2012-04-08 02:18 ./source/x/x11/slack-desc/font-sun-misc
+-rw-r--r--   1 root root       822 2012-04-08 02:18 ./source/x/x11/slack-desc/font-util
+-rw-r--r--   1 root root       974 2012-04-08 02:19 ./source/x/x11/slack-desc/font-winitzki-cyrillic
+-rw-r--r--   1 root root       920 2012-04-08 02:20 ./source/x/x11/slack-desc/font-xfree86-type1
+-rw-r--r--   1 root root       883 2012-04-08 02:20 ./source/x/x11/slack-desc/fontcacheproto
+-rw-r--r--   1 root root       824 2012-04-08 02:20 ./source/x/x11/slack-desc/fontsproto
+-rw-r--r--   1 root root       833 2012-04-08 02:22 ./source/x/x11/slack-desc/fonttosfnt
+-rw-r--r--   1 root root       823 2012-04-08 02:23 ./source/x/x11/slack-desc/fslsfonts
+-rw-r--r--   1 root root       829 2012-04-08 02:23 ./source/x/x11/slack-desc/fstobdf
+-rw-r--r--   1 root root       818 2012-04-08 02:23 ./source/x/x11/slack-desc/gccmakedep
+-rw-r--r--   1 root root       781 2012-04-08 02:25 ./source/x/x11/slack-desc/glproto
+-rw-r--r--   1 root root       806 2012-04-08 02:26 ./source/x/x11/slack-desc/iceauth
+-rw-r--r--   1 root root       761 2012-04-08 02:26 ./source/x/x11/slack-desc/ico
+-rw-r--r--   1 root root       748 2012-04-08 02:27 ./source/x/x11/slack-desc/imake
+-rw-r--r--   1 root root       820 2012-04-08 02:27 ./source/x/x11/slack-desc/inputproto
+-rw-r--r--   1 root root       879 2012-04-08 02:28 ./source/x/x11/slack-desc/intel-gpu-tools
+-rw-r--r--   1 root root       785 2012-04-08 02:28 ./source/x/x11/slack-desc/kbproto
+-rw-r--r--   1 root root       745 2012-04-08 02:28 ./source/x/x11/slack-desc/libFS
+-rw-r--r--   1 root root       761 2012-04-08 02:29 ./source/x/x11/slack-desc/libICE
+-rw-r--r--   1 root root       744 2012-04-08 02:42 ./source/x/x11/slack-desc/libSM
+-rw-r--r--   1 root root       762 2012-04-08 02:42 ./source/x/x11/slack-desc/libX11
+-rw-r--r--   1 root root       869 2012-04-08 03:03 ./source/x/x11/slack-desc/libXScrnSaver
+-rw-r--r--   1 root root       926 2012-04-08 03:06 ./source/x/x11/slack-desc/libXau
+-rw-r--r--   1 root root       665 2012-04-08 03:03 ./source/x/x11/slack-desc/libXaw
+-rw-r--r--   1 root root       971 2012-04-08 02:50 ./source/x/x11/slack-desc/libXaw3d
+-rw-r--r--   1 root root       767 2012-04-08 02:51 ./source/x/x11/slack-desc/libXcm
+-rw-r--r--   1 root root       872 2012-04-08 03:04 ./source/x/x11/slack-desc/libXcomposite
+-rw-r--r--   1 root root       827 2012-04-08 03:06 ./source/x/x11/slack-desc/libXcursor
+-rw-r--r--   1 root root       827 2012-04-08 03:06 ./source/x/x11/slack-desc/libXdamage
+-rw-r--r--   1 root root       800 2012-04-08 03:07 ./source/x/x11/slack-desc/libXdmcp
+-rw-r--r--   1 root root       804 2012-04-08 03:07 ./source/x/x11/slack-desc/libXevie
+-rw-r--r--   1 root root       793 2012-04-08 03:08 ./source/x/x11/slack-desc/libXext
+-rw-r--r--   1 root root       811 2012-04-08 03:08 ./source/x/x11/slack-desc/libXfixes
+-rw-r--r--   1 root root      1034 2012-04-08 03:18 ./source/x/x11/slack-desc/libXfont
+-rw-r--r--   1 root root       874 2012-04-08 03:18 ./source/x/x11/slack-desc/libXfontcache
+-rw-r--r--   1 root root       748 2012-04-08 03:18 ./source/x/x11/slack-desc/libXft
+-rw-r--r--   1 root root       749 2012-04-08 03:18 ./source/x/x11/slack-desc/libXi
+-rw-r--r--   1 root root       846 2012-04-08 03:19 ./source/x/x11/slack-desc/libXinerama
+-rw-r--r--   1 root root       807 2012-04-08 03:23 ./source/x/x11/slack-desc/libXmu
+-rw-r--r--   1 root root       738 2012-04-08 03:23 ./source/x/x11/slack-desc/libXp
+-rw-r--r--   1 root root       770 2012-04-08 03:24 ./source/x/x11/slack-desc/libXpm
+-rw-r--r--   1 root root       821 2012-04-08 03:24 ./source/x/x11/slack-desc/libXrandr
+-rw-r--r--   1 root root       838 2012-04-08 03:24 ./source/x/x11/slack-desc/libXrender
+-rw-r--r--   1 root root       779 2012-04-08 03:25 ./source/x/x11/slack-desc/libXres
+-rw-r--r--   1 root root       744 2012-04-08 03:26 ./source/x/x11/slack-desc/libXt
+-rw-r--r--   1 root root       792 2012-04-08 03:26 ./source/x/x11/slack-desc/libXtst
+-rw-r--r--   1 root root       777 2012-04-08 03:26 ./source/x/x11/slack-desc/libXv
+-rw-r--r--   1 root root       777 2012-04-08 02:52 ./source/x/x11/slack-desc/libXvMC
+-rw-r--r--   1 root root       844 2012-04-08 03:27 ./source/x/x11/slack-desc/libXxf86dga
+-rw-r--r--   1 root root       864 2012-04-08 03:27 ./source/x/x11/slack-desc/libXxf86misc
+-rw-r--r--   1 root root       829 2012-04-08 03:27 ./source/x/x11/slack-desc/libXxf86vm
+-rw-r--r--   1 root root       777 2012-04-08 03:28 ./source/x/x11/slack-desc/libdmx
+-rw-r--r--   1 root root       807 2012-04-08 03:28 ./source/x/x11/slack-desc/libfontenc
+-rw-r--r--   1 root root       840 2012-04-08 03:29 ./source/x/x11/slack-desc/libpciaccess
+-rw-r--r--   1 root root      1003 2012-04-08 03:30 ./source/x/x11/slack-desc/libpthread-stubs
+-rw-r--r--   1 root root       903 2007-02-14 06:52 ./source/x/x11/slack-desc/libxcb
+-rw-r--r--   1 root root       824 2012-04-08 02:45 ./source/x/x11/slack-desc/libxkbfile
+-rw-r--r--   1 root root       707 2012-04-08 03:30 ./source/x/x11/slack-desc/listres
+-rw-r--r--   1 root root       778 2012-04-08 03:31 ./source/x/x11/slack-desc/lndir
+-rw-r--r--   1 root root       827 2012-04-08 03:31 ./source/x/x11/slack-desc/luit
+-rw-r--r--   1 root root       818 2012-04-08 03:31 ./source/x/x11/slack-desc/makedepend
+-rw-r--r--   1 root root       890 2012-04-08 03:31 ./source/x/x11/slack-desc/mkcomposecache
+-rw-r--r--   1 root root       823 2012-04-08 03:32 ./source/x/x11/slack-desc/mkfontdir
+-rw-r--r--   1 root root       734 2012-04-08 03:32 ./source/x/x11/slack-desc/mkfontscale
+-rw-r--r--   1 root root       679 2012-04-08 03:32 ./source/x/x11/slack-desc/oclock
+-rw-r--r--   1 root root       823 2012-04-08 02:44 ./source/x/x11/slack-desc/pixman
+-rw-r--r--   1 root root       731 2012-04-08 03:32 ./source/x/x11/slack-desc/printproto
+-rw-r--r--   1 root root       674 2012-04-08 03:32 ./source/x/x11/slack-desc/randrproto
+-rw-r--r--   1 root root       835 2012-04-08 03:33 ./source/x/x11/slack-desc/recordproto
+-rw-r--r--   1 root root       760 2012-04-08 03:40 ./source/x/x11/slack-desc/rendercheck
+-rw-r--r--   1 root root       838 2012-04-08 03:40 ./source/x/x11/slack-desc/renderproto
+-rw-r--r--   1 root root       865 2012-04-08 03:40 ./source/x/x11/slack-desc/resourceproto
+-rw-r--r--   1 root root       709 2012-04-08 03:40 ./source/x/x11/slack-desc/rgb
+-rw-r--r--   1 root root       889 2012-04-08 03:41 ./source/x/x11/slack-desc/scrnsaverproto
+-rw-r--r--   1 root root       750 2012-04-08 03:41 ./source/x/x11/slack-desc/sessreg
+-rw-r--r--   1 root root       798 2012-04-08 03:42 ./source/x/x11/slack-desc/setxkbmap
+-rw-r--r--   1 root root       737 2012-04-08 03:42 ./source/x/x11/slack-desc/showfont
+-rw-r--r--   1 root root       707 2012-04-08 03:42 ./source/x/x11/slack-desc/smproxy
+-rw-r--r--   1 root root       884 2012-06-13 15:39 ./source/x/x11/slack-desc/transset
+-rw-r--r--   1 root root       730 2012-04-08 03:43 ./source/x/x11/slack-desc/twm
+-rw-r--r--   1 root root       823 2012-04-08 03:43 ./source/x/x11/slack-desc/util-macros
+-rw-r--r--   1 root root       820 2012-04-08 03:43 ./source/x/x11/slack-desc/videoproto
+-rw-r--r--   1 root root       796 2012-04-08 03:43 ./source/x/x11/slack-desc/viewres
+-rw-r--r--   1 root root       779 2012-04-08 03:44 ./source/x/x11/slack-desc/x11perf
+-rw-r--r--   1 root root       679 2012-04-08 03:44 ./source/x/x11/slack-desc/xauth
+-rw-r--r--   1 root root       796 2012-04-08 03:44 ./source/x/x11/slack-desc/xbacklight
+-rw-r--r--   1 root root       726 2012-04-08 03:44 ./source/x/x11/slack-desc/xbiff
+-rw-r--r--   1 root root       786 2012-04-08 03:45 ./source/x/x11/slack-desc/xbitmaps
+-rw-r--r--   1 root root       639 2012-04-08 03:45 ./source/x/x11/slack-desc/xcalc
+-rw-r--r--   1 root root       922 2012-04-08 01:17 ./source/x/x11/slack-desc/xcb-proto
+-rw-r--r--   1 root root       809 2012-04-08 03:45 ./source/x/x11/slack-desc/xcb-util
+-rw-r--r--   1 root root       778 2012-04-08 01:14 ./source/x/x11/slack-desc/xcb-util-image
+-rw-r--r--   1 root root       827 2012-04-08 01:18 ./source/x/x11/slack-desc/xcb-util-keysyms
+-rw-r--r--   1 root root       871 2012-04-08 03:49 ./source/x/x11/slack-desc/xcb-util-renderutil
+-rw-r--r--   1 root root       774 2012-04-08 03:51 ./source/x/x11/slack-desc/xcb-util-wm
+-rw-r--r--   1 root root       890 2012-04-08 03:46 ./source/x/x11/slack-desc/xclipboard
+-rw-r--r--   1 root root       748 2012-04-08 03:52 ./source/x/x11/slack-desc/xclock
+-rw-r--r--   1 root root       838 2012-04-08 03:52 ./source/x/x11/slack-desc/xcmiscproto
+-rw-r--r--   1 root root       824 2012-04-08 03:54 ./source/x/x11/slack-desc/xcmsdb
+-rw-r--r--   1 root root       761 2012-04-08 03:53 ./source/x/x11/slack-desc/xcompmgr
+-rw-r--r--   1 root root       678 2012-04-08 03:54 ./source/x/x11/slack-desc/xconsole
+-rw-r--r--   1 root root       844 2012-04-08 03:54 ./source/x/x11/slack-desc/xcursor-themes
+-rw-r--r--   1 root root       834 2012-04-08 03:54 ./source/x/x11/slack-desc/xcursorgen
+-rw-r--r--   1 root root       714 2012-04-08 03:55 ./source/x/x11/slack-desc/xdbedizzy
+-rw-r--r--   1 root root       797 2012-04-08 03:55 ./source/x/x11/slack-desc/xditview
+-rw-r--r--   1 root root       707 2012-04-08 03:55 ./source/x/x11/slack-desc/xdm
+-rw-r--r--   1 root root       810 2012-04-08 03:56 ./source/x/x11/slack-desc/xdpyinfo
+-rw-r--r--   1 root root       808 2012-04-08 03:56 ./source/x/x11/slack-desc/xdriinfo
+-rw-r--r--   1 root root       740 2012-04-08 03:57 ./source/x/x11/slack-desc/xedit
+-rw-r--r--   1 root root       949 2012-04-08 03:57 ./source/x/x11/slack-desc/xev
+-rw-r--r--   1 root root       810 2012-04-08 03:57 ./source/x/x11/slack-desc/xextproto
+-rw-r--r--   1 root root       770 2012-04-08 03:58 ./source/x/x11/slack-desc/xeyes
+-rw-r--r--   1 root root       931 2012-04-08 03:58 ./source/x/x11/slack-desc/xf86-input-acecad
+-rw-r--r--   1 root root       932 2012-04-08 03:59 ./source/x/x11/slack-desc/xf86-input-aiptek
+-rw-r--r--   1 root root       918 2012-04-08 03:59 ./source/x/x11/slack-desc/xf86-input-evdev
+-rw-r--r--   1 root root       955 2012-04-08 04:00 ./source/x/x11/slack-desc/xf86-input-joystick
+-rw-r--r--   1 root root       946 2012-07-22 17:18 ./source/x/x11/slack-desc/xf86-input-keyboard
+-rw-r--r--   1 root root       896 2012-05-07 16:08 ./source/x/x11/slack-desc/xf86-input-mouse
+-rw-r--r--   1 root root       955 2012-04-08 04:02 ./source/x/x11/slack-desc/xf86-input-penmount
+-rw-r--r--   1 root root       961 2012-04-08 04:03 ./source/x/x11/slack-desc/xf86-input-synaptics
+-rw-r--r--   1 root root       945 2012-04-08 04:03 ./source/x/x11/slack-desc/xf86-input-vmmouse
+-rw-r--r--   1 root root       889 2012-04-08 04:03 ./source/x/x11/slack-desc/xf86-input-void
+-rw-r--r--   1 root root      1000 2012-04-08 04:03 ./source/x/x11/slack-desc/xf86-input-wacom
+-rw-r--r--   1 root root       889 2012-04-08 04:04 ./source/x/x11/slack-desc/xf86-video-apm
+-rw-r--r--   1 root root       882 2012-04-08 04:05 ./source/x/x11/slack-desc/xf86-video-ark
+-rw-r--r--   1 root root       895 2012-04-08 04:05 ./source/x/x11/slack-desc/xf86-video-ast
+-rw-r--r--   1 root root       887 2012-04-08 04:05 ./source/x/x11/slack-desc/xf86-video-ati
+-rw-r--r--   1 root root       914 2012-04-08 04:06 ./source/x/x11/slack-desc/xf86-video-chips
+-rw-r--r--   1 root root       931 2012-04-08 04:06 ./source/x/x11/slack-desc/xf86-video-cirrus
+-rw-r--r--   1 root root       919 2012-04-08 04:07 ./source/x/x11/slack-desc/xf86-video-dummy
+-rw-r--r--   1 root root       878 2012-05-08 16:28 ./source/x/x11/slack-desc/xf86-video-fbdev
+-rw-r--r--   1 root root       915 2012-04-08 04:07 ./source/x/x11/slack-desc/xf86-video-geode
+-rw-r--r--   1 root root       919 2012-04-08 04:07 ./source/x/x11/slack-desc/xf86-video-glint
+-rw-r--r--   1 root root       907 2012-04-08 04:08 ./source/x/x11/slack-desc/xf86-video-i128
+-rw-r--r--   1 root root       901 2012-04-08 04:08 ./source/x/x11/slack-desc/xf86-video-i740
+-rw-r--r--   1 root root       910 2012-04-08 04:09 ./source/x/x11/slack-desc/xf86-video-intel
+-rw-r--r--   1 root root       923 2012-04-08 04:09 ./source/x/x11/slack-desc/xf86-video-mach64
+-rw-r--r--   1 root root       883 2012-04-08 04:10 ./source/x/x11/slack-desc/xf86-video-mga
+-rw-r--r--   1 root root       987 2012-04-08 04:12 ./source/x/x11/slack-desc/xf86-video-modesetting
+-rw-r--r--   1 root root       955 2012-04-08 04:10 ./source/x/x11/slack-desc/xf86-video-neomagic
+-rw-r--r--   1 root root       945 2012-04-08 04:13 ./source/x/x11/slack-desc/xf86-video-nouveau
+-rw-r--r--   1 root root       873 2012-04-08 04:11 ./source/x/x11/slack-desc/xf86-video-nv
+-rw-r--r--   1 root root       978 2012-04-08 04:13 ./source/x/x11/slack-desc/xf86-video-openchrome
+-rw-r--r--   1 root root       734 2012-04-08 04:14 ./source/x/x11/slack-desc/xf86-video-qxl
+-rw-r--r--   1 root root       903 2012-04-08 04:15 ./source/x/x11/slack-desc/xf86-video-r128
+-rw-r--r--   1 root root       970 2012-04-08 04:19 ./source/x/x11/slack-desc/xf86-video-rendition
+-rw-r--r--   1 root root       882 2012-04-08 04:19 ./source/x/x11/slack-desc/xf86-video-s3
+-rw-r--r--   1 root root       941 2012-04-08 04:19 ./source/x/x11/slack-desc/xf86-video-s3virge
+-rw-r--r--   1 root root       928 2012-04-08 04:20 ./source/x/x11/slack-desc/xf86-video-savage
+-rw-r--r--   1 root root      1018 2012-04-08 04:20 ./source/x/x11/slack-desc/xf86-video-siliconmotion
+-rw-r--r--   1 root root       888 2012-04-08 04:23 ./source/x/x11/slack-desc/xf86-video-sis
+-rw-r--r--   1 root root       927 2012-04-08 04:23 ./source/x/x11/slack-desc/xf86-video-sisusb
+-rw-r--r--   1 root root       895 2012-04-08 04:23 ./source/x/x11/slack-desc/xf86-video-tdfx
+-rw-r--r--   1 root root       889 2012-04-08 04:23 ./source/x/x11/slack-desc/xf86-video-tga
+-rw-r--r--   1 root root       940 2012-04-08 04:24 ./source/x/x11/slack-desc/xf86-video-trident
+-rw-r--r--   1 root root       915 2012-04-08 04:24 ./source/x/x11/slack-desc/xf86-video-tseng
+-rw-r--r--   1 root root       876 2012-04-08 04:24 ./source/x/x11/slack-desc/xf86-video-v4l
+-rw-r--r--   1 root root       903 2012-04-08 04:25 ./source/x/x11/slack-desc/xf86-video-vesa
+-rw-r--r--   1 root root       930 2012-04-08 04:25 ./source/x/x11/slack-desc/xf86-video-vmware
+-rw-r--r--   1 root root       925 2012-04-08 04:25 ./source/x/x11/slack-desc/xf86-video-voodoo
+-rw-r--r--   1 root root       880 2012-04-08 04:26 ./source/x/x11/slack-desc/xf86-video-xgi
+-rw-r--r--   1 root root       904 2012-04-08 04:28 ./source/x/x11/slack-desc/xf86bigfontproto
+-rw-r--r--   1 root root       792 2012-04-08 04:26 ./source/x/x11/slack-desc/xf86dga
+-rw-r--r--   1 root root       803 2012-04-08 04:29 ./source/x/x11/slack-desc/xf86dgaproto
+-rw-r--r--   1 root root       842 2012-04-08 04:27 ./source/x/x11/slack-desc/xf86driproto
+-rw-r--r--   1 root root       896 2012-04-08 04:30 ./source/x/x11/slack-desc/xf86miscproto
+-rw-r--r--   1 root root       915 2012-04-08 04:30 ./source/x/x11/slack-desc/xf86vidmodeproto
+-rw-r--r--   1 root root       621 2012-04-08 04:31 ./source/x/x11/slack-desc/xfd
+-rw-r--r--   1 root root       804 2012-04-08 04:31 ./source/x/x11/slack-desc/xfontsel
+-rw-r--r--   1 root root       707 2012-04-08 01:11 ./source/x/x11/slack-desc/xfs
+-rw-r--r--   1 root root       880 2012-04-08 04:32 ./source/x/x11/slack-desc/xfsinfo
+-rw-r--r--   1 root root       706 2012-04-08 04:33 ./source/x/x11/slack-desc/xgamma
+-rw-r--r--   1 root root       633 2012-04-08 04:33 ./source/x/x11/slack-desc/xgc
+-rw-r--r--   1 root root       673 2012-04-08 04:33 ./source/x/x11/slack-desc/xhost
+-rw-r--r--   1 root root       867 2012-04-08 04:34 ./source/x/x11/slack-desc/xineramaproto
+-rw-r--r--   1 root root       771 2012-07-22 17:18 ./source/x/x11/slack-desc/xinit
+-rw-r--r--   1 root root       952 2012-04-08 04:34 ./source/x/x11/slack-desc/xinput
+-rw-r--r--   1 root root       764 2012-04-08 04:35 ./source/x/x11/slack-desc/xkbcomp
+-rw-r--r--   1 root root       755 2012-04-08 04:36 ./source/x/x11/slack-desc/xkbevd
+-rw-r--r--   1 root root       703 2012-04-08 04:36 ./source/x/x11/slack-desc/xkbprint
+-rw-r--r--   1 root root       708 2012-04-08 04:36 ./source/x/x11/slack-desc/xkbutils
+-rw-r--r--   1 root root      1122 2012-04-08 04:37 ./source/x/x11/slack-desc/xkeyboard-config
+-rw-r--r--   1 root root       757 2012-04-08 04:37 ./source/x/x11/slack-desc/xkill
+-rw-r--r--   1 root root       763 2012-04-08 04:37 ./source/x/x11/slack-desc/xload
+-rw-r--r--   1 root root       749 2012-04-08 04:38 ./source/x/x11/slack-desc/xlogo
+-rw-r--r--   1 root root       807 2012-04-08 04:38 ./source/x/x11/slack-desc/xlsatoms
+-rw-r--r--   1 root root       747 2012-04-08 04:39 ./source/x/x11/slack-desc/xlsclients
+-rw-r--r--   1 root root       696 2012-04-08 04:39 ./source/x/x11/slack-desc/xlsfonts
+-rw-r--r--   1 root root       620 2012-04-08 04:39 ./source/x/x11/slack-desc/xmag
+-rw-r--r--   1 root root       753 2012-04-08 04:40 ./source/x/x11/slack-desc/xman
+-rw-r--r--   1 root root       780 2012-04-08 04:41 ./source/x/x11/slack-desc/xmessage
+-rw-r--r--   1 root root       692 2012-04-08 04:41 ./source/x/x11/slack-desc/xmh
+-rw-r--r--   1 root root       868 2012-04-08 04:42 ./source/x/x11/slack-desc/xmodmap
+-rw-r--r--   1 root root       766 2012-04-08 04:42 ./source/x/x11/slack-desc/xmore
+-rw-r--r--   1 root root       954 2012-04-08 04:43 ./source/x/x11/slack-desc/xorg-cf-files
+-rw-r--r--   1 root root       805 2012-04-08 04:43 ./source/x/x11/slack-desc/xorg-docs
+-rw-r--r--   1 root root      1160 2007-02-13 18:20 ./source/x/x11/slack-desc/xorg-server
+-rw-r--r--   1 root root       839 2009-05-30 01:47 ./source/x/x11/slack-desc/xorg-server-xephyr
+-rw-r--r--   1 root root      1063 2007-02-13 18:18 ./source/x/x11/slack-desc/xorg-server-xnest
+-rw-r--r--   1 root root      1160 2007-02-13 18:20 ./source/x/x11/slack-desc/xorg-server-xvfb
+-rw-r--r--   1 root root      1140 2012-04-08 04:44 ./source/x/x11/slack-desc/xorg-sgml-doctools
+-rw-r--r--   1 root root       664 2012-04-08 00:58 ./source/x/x11/slack-desc/xpr
+-rw-r--r--   1 root root       766 2012-04-08 04:45 ./source/x/x11/slack-desc/xprop
+-rw-r--r--   1 root root       776 2012-04-08 04:45 ./source/x/x11/slack-desc/xproto
+-rw-r--r--   1 root root       625 2012-04-08 04:46 ./source/x/x11/slack-desc/xpyb
+-rw-r--r--   1 root root       658 2012-04-08 04:46 ./source/x/x11/slack-desc/xrandr
+-rw-r--r--   1 root root       736 2012-04-08 04:46 ./source/x/x11/slack-desc/xrdb
+-rw-r--r--   1 root root       792 2012-04-08 04:46 ./source/x/x11/slack-desc/xrefresh
+-rw-r--r--   1 root root       773 2012-04-08 04:46 ./source/x/x11/slack-desc/xscope
+-rw-r--r--   1 root root       681 2012-04-08 01:01 ./source/x/x11/slack-desc/xset
+-rw-r--r--   1 root root       801 2012-04-08 04:47 ./source/x/x11/slack-desc/xsetroot
+-rw-r--r--   1 root root       707 2012-04-08 04:47 ./source/x/x11/slack-desc/xsm
+-rw-r--r--   1 root root       881 2012-04-08 04:47 ./source/x/x11/slack-desc/xstdcmap
+-rw-r--r--   1 root root       849 2012-04-08 04:47 ./source/x/x11/slack-desc/xtrans
+-rw-r--r--   1 root root       694 2012-04-08 04:48 ./source/x/x11/slack-desc/xvidtune
+-rw-r--r--   1 root root       710 2012-04-08 03:25 ./source/x/x11/slack-desc/xvinfo
+-rw-r--r--   1 root root       716 2012-04-08 02:21 ./source/x/x11/slack-desc/xwd
+-rw-r--r--   1 root root       702 2012-04-08 02:21 ./source/x/x11/slack-desc/xwininfo
+-rw-r--r--   1 root root       668 2012-04-07 23:42 ./source/x/x11/slack-desc/xwud
+drwxr-xr-x  12 root root      4096 2012-06-13 04:34 ./source/x/x11/src
+drwxr-xr-x   2 root root      4096 2012-06-13 14:22 ./source/x/x11/src/app
+-rw-r--r--   1 root root     97604 2010-10-31 18:51 ./source/x/x11/src/app/appres-1.0.3.tar.xz
+-rw-r--r--   1 root root     97448 2010-10-30 03:02 ./source/x/x11/src/app/bdftopcf-1.0.3.tar.xz
+-rw-r--r--   1 root root    100340 2010-10-30 19:19 ./source/x/x11/src/app/beforelight-1.0.4.tar.xz
+-rw-r--r--   1 root root    148404 2012-03-09 05:41 ./source/x/x11/src/app/bitmap-1.0.6.tar.xz
+-rw-r--r--   1 root root    942584 2011-03-30 09:42 ./source/x/x11/src/app/compiz-0.8.8.tar.xz
+-rw-r--r--   1 root root    136928 2010-10-30 19:44 ./source/x/x11/src/app/editres-1.0.5.tar.xz
+-rw-r--r--   1 root root     98084 2008-05-10 22:53 ./source/x/x11/src/app/fonttosfnt-1.0.4.tar.xz
+-rw-r--r--   1 root root    109228 2012-04-20 20:33 ./source/x/x11/src/app/fslsfonts-1.0.4.tar.xz
+-rw-r--r--   1 root root    110160 2012-04-20 20:44 ./source/x/x11/src/app/fstobdf-1.0.5.tar.xz
+-rw-r--r--   1 root root    111796 2011-05-24 02:44 ./source/x/x11/src/app/iceauth-1.0.5.tar.xz
+-rw-r--r--   1 root root    107744 2010-10-30 20:12 ./source/x/x11/src/app/ico-1.0.3.tar.xz
+-rw-r--r--   1 root root    419004 2012-02-09 21:51 ./source/x/x11/src/app/intel-gpu-tools-1.2.tar.xz
+-rw-r--r--   1 root root    106644 2012-03-01 03:35 ./source/x/x11/src/app/listres-1.0.3.tar.xz
+-rw-r--r--   1 root root    128468 2012-03-23 04:25 ./source/x/x11/src/app/luit-1.1.1.tar.xz
+-rw-r--r--   1 root root     90748 2009-10-13 20:33 ./source/x/x11/src/app/mkcomposecache-1.2.1.tar.xz
+-rw-r--r--   1 root root    100044 2012-02-11 03:59 ./source/x/x11/src/app/mkfontdir-1.0.7.tar.xz
+-rw-r--r--   1 root root    121564 2012-02-11 04:20 ./source/x/x11/src/app/mkfontscale-1.1.0.tar.xz
+-rw-r--r--   1 root root    113356 2012-02-11 05:27 ./source/x/x11/src/app/oclock-1.0.3.tar.xz
+-rw-r--r--   1 root root    115856 2010-11-22 02:56 ./source/x/x11/src/app/rendercheck-1.4.tar.xz
+-rw-r--r--   1 root root    110304 2010-10-07 03:21 ./source/x/x11/src/app/rgb-1.0.4.tar.xz
+-rw-r--r--   1 root root    111676 2011-10-22 04:15 ./source/x/x11/src/app/sessreg-1.0.7.tar.xz
+-rw-r--r--   1 root root    116392 2012-03-23 04:37 ./source/x/x11/src/app/setxkbmap-1.3.0.tar.xz
+-rw-r--r--   1 root root     99616 2010-10-30 21:57 ./source/x/x11/src/app/showfont-1.0.3.tar.xz
+-rw-r--r--   1 root root    109552 2011-06-30 03:45 ./source/x/x11/src/app/smproxy-1.0.5.tar.xz
+-rw-r--r--   1 root root    109576 2012-06-05 06:02 ./source/x/x11/src/app/transset-1.0.0.tar.xz
+-rw-r--r--   1 root root    241528 2011-07-28 03:43 ./source/x/x11/src/app/twm-1.0.7.tar.xz
+-rw-r--r--   1 root root    106276 2010-10-30 22:18 ./source/x/x11/src/app/viewres-1.0.3.tar.xz
+-rw-r--r--   1 root root    155192 2011-07-28 01:32 ./source/x/x11/src/app/x11perf-1.5.4.tar.xz
+-rw-r--r--   1 root root    129204 2012-03-23 04:51 ./source/x/x11/src/app/xauth-1.0.7.tar.xz
+-rw-r--r--   1 root root     95900 2010-12-09 07:13 ./source/x/x11/src/app/xbacklight-1.1.2.tar.xz
+-rw-r--r--   1 root root    107328 2011-01-25 20:45 ./source/x/x11/src/app/xbiff-1.0.3.tar.xz
+-rw-r--r--   1 root root    114364 2010-11-26 21:56 ./source/x/x11/src/app/xcalc-1.0.4.1.tar.xz
+-rw-r--r--   1 root root    114748 2012-02-11 05:39 ./source/x/x11/src/app/xclipboard-1.1.2.tar.xz
+-rw-r--r--   1 root root    142852 2012-02-11 06:09 ./source/x/x11/src/app/xclock-1.0.6.tar.xz
+-rw-r--r--   1 root root    122168 2012-02-15 02:41 ./source/x/x11/src/app/xcmsdb-1.0.4.tar.xz
+-rw-r--r--   1 root root    114384 2012-02-15 03:24 ./source/x/x11/src/app/xcompmgr-1.1.6.tar.xz
+-rw-r--r--   1 root root    106728 2010-09-24 02:32 ./source/x/x11/src/app/xconsole-1.0.4.tar.xz
+-rw-r--r--   1 root root    107480 2012-03-23 04:55 ./source/x/x11/src/app/xcursorgen-1.0.5.tar.xz
+-rw-r--r--   1 root root    102156 2010-10-31 17:10 ./source/x/x11/src/app/xdbedizzy-1.1.0.tar.xz
+-rw-r--r--   1 root root    120980 2010-08-06 23:10 ./source/x/x11/src/app/xditview-1.0.2.tar.xz
+-rw-r--r--   1 root root    381740 2011-09-25 07:43 ./source/x/x11/src/app/xdm-1.1.11.tar.xz
+-rw-r--r--   1 root root    117732 2011-10-22 04:36 ./source/x/x11/src/app/xdpyinfo-1.3.0.tar.xz
+-rw-r--r--   1 root root     97056 2010-11-09 07:03 ./source/x/x11/src/app/xdriinfo-1.0.4.tar.xz
+-rw-r--r--   1 root root    457836 2010-10-30 22:30 ./source/x/x11/src/app/xedit-1.2.0.tar.xz
+-rw-r--r--   1 root root    112652 2012-02-22 05:15 ./source/x/x11/src/app/xev-1.2.0.tar.xz
+-rw-r--r--   1 root root    105108 2010-11-25 07:30 ./source/x/x11/src/app/xeyes-1.1.1.tar.xz
+-rw-r--r--   1 root root     97320 2010-10-31 18:20 ./source/x/x11/src/app/xf86dga-1.0.3.tar.xz
+-rw-r--r--   1 root root    119880 2012-02-16 00:17 ./source/x/x11/src/app/xfd-1.1.1.tar.xz
+-rw-r--r--   1 root root    125104 2012-03-23 05:32 ./source/x/x11/src/app/xfontsel-1.0.4.tar.xz
+-rw-r--r--   1 root root    203900 2012-02-29 07:07 ./source/x/x11/src/app/xfs-1.1.2.tar.xz
+-rw-r--r--   1 root root     97452 2010-10-30 22:56 ./source/x/x11/src/app/xfsinfo-1.0.3.tar.xz
+-rw-r--r--   1 root root    106112 2012-03-23 05:37 ./source/x/x11/src/app/xgamma-1.0.5.tar.xz
+-rw-r--r--   1 root root    154592 2010-10-30 23:35 ./source/x/x11/src/app/xgc-1.0.3.tar.xz
+-rw-r--r--   1 root root    116664 2012-03-23 04:59 ./source/x/x11/src/app/xhost-1.0.5.tar.xz
+-rw-r--r--   1 root root    134480 2012-01-28 07:15 ./source/x/x11/src/app/xinit-1.3.2.tar.xz
+-rw-r--r--   1 root root    135800 2012-05-15 05:45 ./source/x/x11/src/app/xinput-1.6.0.tar.xz
+-rw-r--r--   1 root root    214696 2012-03-23 05:05 ./source/x/x11/src/app/xkbcomp-1.2.4.tar.xz
+-rw-r--r--   1 root root    135600 2012-03-23 05:41 ./source/x/x11/src/app/xkbevd-1.1.3.tar.xz
+-rw-r--r--   1 root root    133736 2011-01-08 03:10 ./source/x/x11/src/app/xkbprint-1.0.3.tar.xz
+-rw-r--r--   1 root root    110104 2010-10-30 17:15 ./source/x/x11/src/app/xkbutils-1.0.3.tar.xz
+-rw-r--r--   1 root root    100368 2010-11-11 03:28 ./source/x/x11/src/app/xkill-1.0.3.tar.xz
+-rw-r--r--   1 root root    120556 2012-03-23 05:44 ./source/x/x11/src/app/xload-1.1.1.tar.xz
+-rw-r--r--   1 root root    115664 2012-03-23 05:58 ./source/x/x11/src/app/xlogo-1.0.4.tar.xz
+-rw-r--r--   1 root root    107652 2012-03-31 23:49 ./source/x/x11/src/app/xlsatoms-1.1.1.tar.xz
+-rw-r--r--   1 root root    105948 2011-05-03 04:20 ./source/x/x11/src/app/xlsclients-1.1.2.tar.xz
+-rw-r--r--   1 root root    115368 2012-04-16 23:55 ./source/x/x11/src/app/xlsfonts-1.0.4.tar.xz
+-rw-r--r--   1 root root    115872 2010-10-31 00:23 ./source/x/x11/src/app/xmag-1.0.4.tar.xz
+-rw-r--r--   1 root root    157188 2011-06-30 04:04 ./source/x/x11/src/app/xman-1.1.2.tar.xz
+-rw-r--r--   1 root root    101600 2010-01-30 07:17 ./source/x/x11/src/app/xmessage-1.0.3.tar.xz
+-rw-r--r--   1 root root    173752 2010-10-31 00:47 ./source/x/x11/src/app/xmh-1.0.2.tar.xz
+-rw-r--r--   1 root root    125528 2012-04-20 21:23 ./source/x/x11/src/app/xmodmap-1.0.7.tar.xz
+-rw-r--r--   1 root root     99592 2010-07-23 22:53 ./source/x/x11/src/app/xmore-1.0.2.tar.xz
+-rw-r--r--   1 root root    131204 2012-03-31 23:58 ./source/x/x11/src/app/xpr-1.0.4.tar.xz
+-rw-r--r--   1 root root    123676 2011-06-30 04:12 ./source/x/x11/src/app/xprop-1.2.1.tar.xz
+-rw-r--r--   1 root root    141768 2011-06-30 04:20 ./source/x/x11/src/app/xrandr-1.3.5.tar.xz
+-rw-r--r--   1 root root    110064 2011-04-05 16:02 ./source/x/x11/src/app/xrdb-1.0.9.tar.xz
+-rw-r--r--   1 root root     97992 2010-11-11 03:55 ./source/x/x11/src/app/xrefresh-1.0.4.tar.xz
+-rw-r--r--   1 root root    174428 2012-02-22 06:02 ./source/x/x11/src/app/xscope-1.3.1.tar.xz
+-rw-r--r--   1 root root    119528 2011-07-29 04:13 ./source/x/x11/src/app/xset-1.2.2.tar.xz
+-rw-r--r--   1 root root    100688 2010-10-30 18:48 ./source/x/x11/src/app/xsetroot-1.1.0.tar.xz
+-rw-r--r--   1 root root    136804 2010-09-27 00:04 ./source/x/x11/src/app/xsm-1.0.2.tar.xz
+-rw-r--r--   1 root root     98468 2010-09-27 01:19 ./source/x/x11/src/app/xstdcmap-1.0.2.tar.xz
+-rw-r--r--   1 root root    103856 2010-01-16 07:12 ./source/x/x11/src/app/xvidtune-1.0.2.tar.xz
+-rw-r--r--   1 root root     98216 2010-11-06 16:01 ./source/x/x11/src/app/xvinfo-1.1.1.tar.xz
+-rw-r--r--   1 root root    126408 2012-02-23 04:23 ./source/x/x11/src/app/xwd-1.0.5.tar.xz
+-rw-r--r--   1 root root    125348 2011-06-30 04:29 ./source/x/x11/src/app/xwininfo-1.1.2.tar.xz
+-rw-r--r--   1 root root    114396 2012-04-01 00:07 ./source/x/x11/src/app/xwud-1.0.4.tar.xz
+drwxr-xr-x   2 root root      4096 2012-06-13 04:31 ./source/x/x11/src/data
+-rw-r--r--   1 root root    107168 2010-12-09 06:29 ./source/x/x11/src/data/xbitmaps-1.1.1.tar.xz
+-rw-r--r--   1 root root   1482588 2010-10-30 15:59 ./source/x/x11/src/data/xcursor-themes-1.0.3.tar.xz
+-rw-r--r--   1 root root    693616 2012-05-29 23:05 ./source/x/x11/src/data/xkeyboard-config-2.6.tar.xz
+drwxr-xr-x   2 root root      4096 2012-06-13 04:31 ./source/x/x11/src/doc
+-rw-r--r--   1 root root    328008 2012-06-06 02:42 ./source/x/x11/src/doc/xorg-docs-1.7.tar.xz
+-rw-r--r--   1 root root    110976 2012-06-06 02:42 ./source/x/x11/src/doc/xorg-sgml-doctools-1.11.tar.xz
+drwxr-xr-x   3 root root      4096 2012-08-04 17:25 ./source/x/x11/src/driver
+drwxr-xr-x   2 root root      4096 2012-06-26 02:28 ./source/x/x11/src/driver/pending
+-rw-r--r--   1 root root    883868 2012-06-07 15:31 ./source/x/x11/src/driver/pending/xf86-video-ati-6.14.5.tar.xz
+-rw-r--r--   1 root root    236544 2011-05-04 23:02 ./source/x/x11/src/driver/xf86-input-acecad-1.5.0.tar.xz
+-rw-r--r--   1 root root    245724 2011-06-29 00:29 ./source/x/x11/src/driver/xf86-input-aiptek-1.4.1.tar.xz
+-rw-r--r--   1 root root    308108 2012-03-07 10:41 ./source/x/x11/src/driver/xf86-input-evdev-2.7.0.tar.xz
+-rw-r--r--   1 root root    268272 2012-03-11 11:05 ./source/x/x11/src/driver/xf86-input-joystick-1.6.1.tar.xz
+-rw-r--r--   1 root root    259680 2012-01-04 00:47 ./source/x/x11/src/driver/xf86-input-keyboard-1.6.1.tar.xz
+-rw-r--r--   1 root root    289380 2012-03-16 06:35 ./source/x/x11/src/driver/xf86-input-mouse-1.7.2.tar.xz
+-rw-r--r--   1 root root    229120 2011-06-28 00:52 ./source/x/x11/src/driver/xf86-input-penmount-1.5.0.tar.xz
+-rw-r--r--   1 root root    396812 2012-06-12 03:43 ./source/x/x11/src/driver/xf86-input-synaptics-1.6.2.tar.xz
+-rw-r--r--   1 root root    252344 2012-05-22 18:34 ./source/x/x11/src/driver/xf86-input-vmmouse-12.9.0.tar.xz
+-rw-r--r--   1 root root    225388 2011-05-05 03:46 ./source/x/x11/src/driver/xf86-input-void-1.4.0.tar.xz
+-rw-r--r--   1 root root    468340 2012-05-02 17:36 ./source/x/x11/src/driver/xf86-input-wacom-0.15.0.tar.xz
+-rw-r--r--   1 root root    271360 2012-05-12 10:56 ./source/x/x11/src/driver/xf86-video-apm-1.2.4.tar.xz
+-rw-r--r--   1 root root    237084 2012-01-26 23:07 ./source/x/x11/src/driver/xf86-video-ark-0.7.4.tar.xz
+-rw-r--r--   1 root root    273556 2012-04-05 03:39 ./source/x/x11/src/driver/xf86-video-ast-0.95.00.tar.xz
+-rw-r--r--   1 root root    879920 2012-03-29 04:23 ./source/x/x11/src/driver/xf86-video-ati-6.14.4.tar.xz
+-rw-r--r--   1 root root    304560 2011-02-27 16:21 ./source/x/x11/src/driver/xf86-video-chips-1.2.4.tar.xz
+-rw-r--r--   1 root root    270556 2012-03-24 01:49 ./source/x/x11/src/driver/xf86-video-cirrus-1.4.0.tar.xz
+-rw-r--r--   1 root root    228948 2012-01-01 06:18 ./source/x/x11/src/driver/xf86-video-dummy-0.3.5.tar.xz
+-rw-r--r--   1 root root    548736 2011-12-26 21:47 ./source/x/x11/src/driver/xf86-video-geode-2.11.13.tar.xz
+-rw-r--r--   1 root root    320116 2012-02-16 04:17 ./source/x/x11/src/driver/xf86-video-glint-1.2.7.tar.xz
+-rw-r--r--   1 root root    266212 2012-03-24 01:53 ./source/x/x11/src/driver/xf86-video-i128-1.3.5.tar.xz
+-rw-r--r--   1 root root    261072 2012-05-12 11:22 ./source/x/x11/src/driver/xf86-video-i740-1.3.3.tar.xz
+-rw-r--r--   1 root root   1152992 2012-04-29 21:06 ./source/x/x11/src/driver/xf86-video-intel-2.19.0.tar.xz
+-rw-r--r--   1 root root    459656 2012-03-24 02:00 ./source/x/x11/src/driver/xf86-video-mach64-6.9.1.tar.xz
+-rw-r--r--   1 root root    372684 2012-03-24 02:05 ./source/x/x11/src/driver/xf86-video-mga-1.5.0.tar.xz
+-rw-r--r--   1 root root    243040 2012-06-22 14:38 ./source/x/x11/src/driver/xf86-video-modesetting-0.4.0.tar.xz
+-rw-r--r--   1 root root    270292 2012-03-24 02:14 ./source/x/x11/src/driver/xf86-video-neomagic-1.2.6.tar.xz
+-rw-r--r--   1 root root    114348 2012-03-24 03:33 ./source/x/x11/src/driver/xf86-video-nouveau-git_20120323_efd7a52.tar.xz
+-rw-r--r--   1 root root    328120 2012-07-17 06:50 ./source/x/x11/src/driver/xf86-video-nv-2.1.20.tar.xz
+-rw-r--r--   1 root root    428820 2012-05-15 21:01 ./source/x/x11/src/driver/xf86-video-openchrome-0.2.906.tar.xz
+-rw-r--r--   1 root root    397220 2012-03-24 02:27 ./source/x/x11/src/driver/xf86-video-r128-6.8.2.tar.xz
+-rw-r--r--   1 root root    290372 2012-03-17 15:32 ./source/x/x11/src/driver/xf86-video-rendition-4.2.4+.tar.xz
+-rw-r--r--   1 root root    269988 2012-05-12 11:54 ./source/x/x11/src/driver/xf86-video-s3-0.6.4.tar.xz
+-rw-r--r--   1 root root    290168 2012-05-13 08:46 ./source/x/x11/src/driver/xf86-video-s3virge-1.10.5.tar.xz
+-rw-r--r--   1 root root    333712 2012-03-24 02:47 ./source/x/x11/src/driver/xf86-video-savage-2.3.4.tar.xz
+-rw-r--r--   1 root root    317632 2012-03-24 02:51 ./source/x/x11/src/driver/xf86-video-siliconmotion-1.7.6.tar.xz
+-rw-r--r--   1 root root    585052 2012-03-24 02:56 ./source/x/x11/src/driver/xf86-video-sis-0.10.4.tar.xz
+-rw-r--r--   1 root root    290200 2010-07-05 05:07 ./source/x/x11/src/driver/xf86-video-sisusb-0.9.4.tar.xz
+-rw-r--r--   1 root root    280752 2012-03-24 03:01 ./source/x/x11/src/driver/xf86-video-tdfx-1.4.4.tar.xz
+-rw-r--r--   1 root root    214348 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-tga-1.2.1.tar.xz
+-rw-r--r--   1 root root    288980 2012-03-24 03:05 ./source/x/x11/src/driver/xf86-video-trident-1.3.5.tar.xz
+-rw-r--r--   1 root root    246852 2010-07-05 04:18 ./source/x/x11/src/driver/xf86-video-tseng-1.2.4.tar.xz
+-rw-r--r--   1 root root    183872 2008-03-19 20:58 ./source/x/x11/src/driver/xf86-video-v4l-0.2.0.tar.xz
+-rw-r--r--   1 root root    240616 2012-03-22 21:34 ./source/x/x11/src/driver/xf86-video-vesa-2.3.1.tar.xz
+-rw-r--r--   1 root root    360696 2012-03-21 19:02 ./source/x/x11/src/driver/xf86-video-vmware-12.0.2.tar.xz
+-rw-r--r--   1 root root    222360 2010-07-05 04:41 ./source/x/x11/src/driver/xf86-video-voodoo-1.2.4.tar.xz
+-rw-r--r--   1 root root    411440 2010-08-10 15:06 ./source/x/x11/src/driver/xf86-video-xgi-1.6.0.tar.xz
+drwxr-xr-x   2 root root      4096 2012-03-04 02:55 ./source/x/x11/src/font
+-rw-r--r--   1 root root    291832 2010-10-30 03:55 ./source/x/x11/src/font/encodings-1.0.4.tar.xz
+-rw-r--r--   1 root root    945192 2010-11-14 23:54 ./source/x/x11/src/font/font-adobe-100dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    796356 2010-11-14 23:54 ./source/x/x11/src/font/font-adobe-75dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    296996 2010-11-14 23:59 ./source/x/x11/src/font/font-adobe-utopia-100dpi-1.0.4.tar.xz
+-rw-r--r--   1 root root    247800 2010-11-15 00:02 ./source/x/x11/src/font/font-adobe-utopia-75dpi-1.0.4.tar.xz
+-rw-r--r--   1 root root    263520 2010-11-15 00:05 ./source/x/x11/src/font/font-adobe-utopia-type1-1.0.4.tar.xz
+-rw-r--r--   1 root root     92712 2010-10-05 06:16 ./source/x/x11/src/font/font-alias-1.0.3.tar.xz
+-rw-r--r--   1 root root    101872 2010-11-15 19:55 ./source/x/x11/src/font/font-arabic-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    589148 2010-11-15 20:01 ./source/x/x11/src/font/font-bh-100dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    489900 2010-11-15 20:06 ./source/x/x11/src/font/font-bh-75dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    216368 2010-11-15 20:11 ./source/x/x11/src/font/font-bh-lucidatypewriter-100dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    193720 2010-11-15 20:16 ./source/x/x11/src/font/font-bh-lucidatypewriter-75dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    367740 2010-11-11 05:26 ./source/x/x11/src/font/font-bh-ttf-1.0.3.tar.xz
+-rw-r--r--   1 root root    628208 2010-11-15 20:36 ./source/x/x11/src/font/font-bh-type1-1.0.3.tar.xz
+-rw-r--r--   1 root root    172716 2010-11-15 20:39 ./source/x/x11/src/font/font-bitstream-100dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    155516 2010-11-15 20:46 ./source/x/x11/src/font/font-bitstream-75dpi-1.0.3.tar.xz
+-rw-r--r--   1 root root    329196 2010-11-15 20:53 ./source/x/x11/src/font/font-bitstream-speedo-1.0.2.tar.xz
+-rw-r--r--   1 root root    390700 2010-11-15 20:56 ./source/x/x11/src/font/font-bitstream-type1-1.0.3.tar.xz
+-rw-r--r--   1 root root    236644 2010-11-15 21:06 ./source/x/x11/src/font/font-cronyx-cyrillic-1.0.3.tar.xz
+-rw-r--r--   1 root root     94716 2010-11-15 21:14 ./source/x/x11/src/font/font-cursor-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    508312 2010-11-15 21:20 ./source/x/x11/src/font/font-daewoo-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root     92740 2010-11-15 21:25 ./source/x/x11/src/font/font-dec-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    374360 2010-11-15 21:33 ./source/x/x11/src/font/font-ibm-type1-1.0.3.tar.xz
+-rw-r--r--   1 root root    719756 2010-11-15 22:21 ./source/x/x11/src/font/font-isas-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    517868 2010-11-15 22:34 ./source/x/x11/src/font/font-jis-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root     91408 2010-11-15 22:38 ./source/x/x11/src/font/font-micro-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    121968 2010-11-15 22:42 ./source/x/x11/src/font/font-misc-cyrillic-1.0.3.tar.xz
+-rw-r--r--   1 root root    218584 2010-11-15 22:46 ./source/x/x11/src/font/font-misc-ethiopic-1.0.3.tar.xz
+-rw-r--r--   1 root root    828248 2010-11-15 22:52 ./source/x/x11/src/font/font-misc-meltho-1.0.3.tar.xz
+-rw-r--r--   1 root root   1423336 2010-11-15 23:06 ./source/x/x11/src/font/font-misc-misc-1.1.2.tar.xz
+-rw-r--r--   1 root root    217292 2010-11-15 23:09 ./source/x/x11/src/font/font-mutt-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    128096 2010-11-15 23:12 ./source/x/x11/src/font/font-schumacher-misc-1.1.2.tar.xz
+-rw-r--r--   1 root root     95876 2010-11-15 23:14 ./source/x/x11/src/font/font-screen-cyrillic-1.0.4.tar.xz
+-rw-r--r--   1 root root     99540 2010-11-15 23:18 ./source/x/x11/src/font/font-sony-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    106568 2010-11-15 23:20 ./source/x/x11/src/font/font-sun-misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    128108 2012-02-29 06:19 ./source/x/x11/src/font/font-util-1.3.0.tar.xz
+-rw-r--r--   1 root root     93740 2010-11-15 23:21 ./source/x/x11/src/font/font-winitzki-cyrillic-1.0.3.tar.xz
+-rw-r--r--   1 root root    117928 2010-11-15 23:23 ./source/x/x11/src/font/font-xfree86-type1-1.0.4.tar.xz
+-rwxr-xr-x   1 root root       989 2012-03-24 03:35 ./source/x/x11/src/get-xf86-video-nouveau.sh
+drwxr-xr-x   2 root root      4096 2012-07-03 21:46 ./source/x/x11/src/lib
+-rw-r--r--   1 root root    255932 2012-03-03 03:50 ./source/x/x11/src/lib/libFS-1.0.4.tar.xz
+-rw-r--r--   1 root root    300760 2012-03-03 04:06 ./source/x/x11/src/lib/libICE-1.0.8.tar.xz
+-rw-r--r--   1 root root    277644 2012-03-03 05:08 ./source/x/x11/src/lib/libSM-1.2.1.tar.xz
+-rw-r--r--   1 root root   1748748 2012-06-02 06:52 ./source/x/x11/src/lib/libX11-1.5.0.tar.xz
+-rw-r--r--   1 root root    235904 2012-03-08 05:08 ./source/x/x11/src/lib/libXScrnSaver-1.2.2.tar.xz
+-rw-r--r--   1 root root    239312 2012-03-07 06:22 ./source/x/x11/src/lib/libXau-1.0.7.tar.xz
+-rw-r--r--   1 root root    561008 2012-06-02 05:55 ./source/x/x11/src/lib/libXaw-1.0.11.tar.xz
+-rw-r--r--   1 root root    454428 2012-03-29 22:44 ./source/x/x11/src/lib/libXaw3d-1.6.2.tar.xz
+-rw-r--r--   1 root root    236384 2012-03-08 19:04 ./source/x/x11/src/lib/libXcm-0.5.0.tar.xz
+-rw-r--r--   1 root root    220776 2010-10-28 05:41 ./source/x/x11/src/lib/libXcomposite-0.4.3.tar.xz
+-rw-r--r--   1 root root    251376 2012-03-08 03:42 ./source/x/x11/src/lib/libXcursor-1.1.13.tar.xz
+-rw-r--r--   1 root root    208192 2010-06-09 01:54 ./source/x/x11/src/lib/libXdamage-1.1.3.tar.xz
+-rw-r--r--   1 root root    258400 2012-03-08 03:49 ./source/x/x11/src/lib/libXdmcp-1.1.1.tar.xz
+-rw-r--r--   1 root root    212200 2010-10-31 16:46 ./source/x/x11/src/lib/libXevie-1.0.3.tar.xz
+-rw-r--r--   1 root root    305212 2012-03-08 04:01 ./source/x/x11/src/lib/libXext-1.3.1.tar.xz
+-rw-r--r--   1 root root    214808 2011-03-08 16:35 ./source/x/x11/src/lib/libXfixes-5.0.tar.xz
+-rw-r--r--   1 root root    397836 2012-03-02 18:12 ./source/x/x11/src/lib/libXfont-1.4.5.tar.xz
+-rw-r--r--   1 root root    189140 2009-10-13 20:47 ./source/x/x11/src/lib/libXfontcache-1.0.5.tar.xz
+-rw-r--r--   1 root root    269932 2012-06-02 16:38 ./source/x/x11/src/lib/libXft-2.3.1.tar.xz
+-rw-r--r--   1 root root    368256 2012-05-03 06:09 ./source/x/x11/src/lib/libXi-1.6.1.tar.xz
+-rw-r--r--   1 root root    231932 2012-03-08 04:32 ./source/x/x11/src/lib/libXinerama-1.1.2.tar.xz
+-rw-r--r--   1 root root    316236 2012-03-06 07:03 ./source/x/x11/src/lib/libXmu-1.1.1.tar.xz
+-rw-r--r--   1 root root    247092 2011-01-14 06:11 ./source/x/x11/src/lib/libXp-1.0.1.tar.xz
+-rw-r--r--   1 root root    354476 2012-03-08 04:42 ./source/x/x11/src/lib/libXpm-3.5.10.tar.xz
+-rw-r--r--   1 root root    245592 2011-06-30 04:53 ./source/x/x11/src/lib/libXrandr-1.3.2.tar.xz
+-rw-r--r--   1 root root    245740 2012-03-08 04:49 ./source/x/x11/src/lib/libXrender-0.9.7.tar.xz
+-rw-r--r--   1 root root    231376 2012-03-08 04:56 ./source/x/x11/src/lib/libXres-1.0.6.tar.xz
+-rw-r--r--   1 root root    631704 2012-03-16 05:59 ./source/x/x11/src/lib/libXt-1.1.3.tar.xz
+-rw-r--r--   1 root root    258156 2012-03-08 05:21 ./source/x/x11/src/lib/libXtst-1.2.1.tar.xz
+-rw-r--r--   1 root root    245724 2012-03-08 05:27 ./source/x/x11/src/lib/libXv-1.0.7.tar.xz
+-rw-r--r--   1 root root    243752 2012-03-08 05:33 ./source/x/x11/src/lib/libXvMC-1.0.7.tar.xz
+-rw-r--r--   1 root root    239476 2012-03-08 05:38 ./source/x/x11/src/lib/libXxf86dga-1.1.3.tar.xz
+-rw-r--r--   1 root root    212836 2010-11-21 21:49 ./source/x/x11/src/lib/libXxf86misc-1.0.3.tar.xz
+-rw-r--r--   1 root root    234720 2012-03-08 05:41 ./source/x/x11/src/lib/libXxf86vm-1.1.2.tar.xz
+-rw-r--r--   1 root root    237872 2012-03-08 05:45 ./source/x/x11/src/lib/libdmx-1.1.2.tar.xz
+-rw-r--r--   1 root root    242116 2012-03-03 02:14 ./source/x/x11/src/lib/libfontenc-1.1.1.tar.xz
+-rw-r--r--   1 root root    286416 2012-04-09 17:45 ./source/x/x11/src/lib/libpciaccess-0.13.1.tar.xz
+-rw-r--r--   1 root root    279316 2012-03-08 04:38 ./source/x/x11/src/lib/libxkbfile-1.0.8.tar.xz
+-rw-r--r--   1 root root    521628 2012-06-29 18:47 ./source/x/x11/src/lib/pixman-0.26.2.tar.xz
+-rw-r--r--   1 root root    158368 2012-03-23 03:08 ./source/x/x11/src/lib/xtrans-1.2.7.tar.xz
+drwxr-xr-x   2 root root      4096 2012-03-23 20:17 ./source/x/x11/src/proto
+-rw-r--r--   1 root root    104916 2012-03-23 04:00 ./source/x/x11/src/proto/bigreqsproto-1.1.2.tar.xz
+-rw-r--r--   1 root root     94356 2010-10-30 03:29 ./source/x/x11/src/proto/compositeproto-0.4.2.tar.xz
+-rw-r--r--   1 root root     91724 2010-10-30 03:37 ./source/x/x11/src/proto/damageproto-1.2.1.tar.xz
+-rw-r--r--   1 root root     89776 2011-01-06 01:39 ./source/x/x11/src/proto/dmxproto-2.3.1.tar.xz
+-rw-r--r--   1 root root     95028 2011-06-29 15:57 ./source/x/x11/src/proto/dri2proto-2.6.tar.xz
+-rw-r--r--   1 root root     88412 2011-01-06 02:06 ./source/x/x11/src/proto/evieext-1.1.1.tar.xz
+-rw-r--r--   1 root root     93728 2011-03-08 16:19 ./source/x/x11/src/proto/fixesproto-5.0.tar.xz
+-rw-r--r--   1 root root     78004 2009-10-13 20:53 ./source/x/x11/src/proto/fontcacheproto-0.1.3.tar.xz
+-rw-r--r--   1 root root    131428 2012-03-23 04:00 ./source/x/x11/src/proto/fontsproto-2.1.2.tar.xz
+-rw-r--r--   1 root root    104940 2012-01-26 14:36 ./source/x/x11/src/proto/glproto-1.4.15.tar.xz
+-rw-r--r--   1 root root    170132 2012-03-02 03:07 ./source/x/x11/src/proto/inputproto-2.2.tar.xz
+-rw-r--r--   1 root root    225924 2012-03-23 04:00 ./source/x/x11/src/proto/kbproto-1.0.6.tar.xz
+-rw-r--r--   1 root root    191432 2011-01-06 02:33 ./source/x/x11/src/proto/printproto-1.0.5.tar.xz
+-rw-r--r--   1 root root    114768 2010-10-30 06:13 ./source/x/x11/src/proto/randrproto-1.3.2.tar.xz
+-rw-r--r--   1 root root    114164 2012-03-23 04:00 ./source/x/x11/src/proto/recordproto-1.14.2.tar.xz
+-rw-r--r--   1 root root     97920 2010-08-10 14:13 ./source/x/x11/src/proto/renderproto-0.11.1.tar.xz
+-rw-r--r--   1 root root     96052 2011-05-28 04:32 ./source/x/x11/src/proto/resourceproto-1.2.0.tar.xz
+-rw-r--r--   1 root root    110116 2012-03-23 04:00 ./source/x/x11/src/proto/scrnsaverproto-1.2.2.tar.xz
+-rw-r--r--   1 root root     92500 2010-08-10 14:17 ./source/x/x11/src/proto/videoproto-2.3.1.tar.xz
+-rw-r--r--   1 root root    104376 2012-03-23 04:01 ./source/x/x11/src/proto/xcmiscproto-1.2.2.tar.xz
+-rw-r--r--   1 root root    206084 2012-03-23 04:01 ./source/x/x11/src/proto/xextproto-7.2.1.tar.xz
+-rw-r--r--   1 root root     45976 2009-10-13 20:53 ./source/x/x11/src/proto/xf86bigfontproto-1.2.0.tar.xz
+-rw-r--r--   1 root root     79572 2009-10-13 20:53 ./source/x/x11/src/proto/xf86dgaproto-2.1.tar.xz
+-rw-r--r--   1 root root     89840 2011-01-06 03:57 ./source/x/x11/src/proto/xf86driproto-2.1.1.tar.xz
+-rw-r--r--   1 root root     78424 2009-10-13 20:53 ./source/x/x11/src/proto/xf86miscproto-0.9.3.tar.xz
+-rw-r--r--   1 root root     90148 2011-01-06 04:06 ./source/x/x11/src/proto/xf86vidmodeproto-2.3.1.tar.xz
+-rw-r--r--   1 root root     89352 2011-01-06 04:21 ./source/x/x11/src/proto/xineramaproto-1.2.1.tar.xz
+-rw-r--r--   1 root root    261672 2012-03-16 06:16 ./source/x/x11/src/proto/xproto-7.0.23.tar.xz
+drwxr-xr-x   2 root root      4096 2012-03-16 12:33 ./source/x/x11/src/util
+-rw-r--r--   1 root root     65616 2006-05-19 18:42 ./source/x/x11/src/util/gccmakedep-1.0.2.tar.xz
+-rw-r--r--   1 root root    138256 2012-03-08 05:48 ./source/x/x11/src/util/imake-1.0.5.tar.xz
+-rw-r--r--   1 root root    106664 2012-03-08 05:51 ./source/x/x11/src/util/lndir-1.0.3.tar.xz
+-rw-r--r--   1 root root    121640 2012-03-08 05:55 ./source/x/x11/src/util/makedepend-1.0.4.tar.xz
+-rw-r--r--   1 root root     73904 2012-03-13 23:49 ./source/x/x11/src/util/util-macros-1.17.tar.xz
+-rw-r--r--   1 root root    315680 2011-01-06 04:37 ./source/x/x11/src/util/xorg-cf-files-1.0.4.tar.xz
+drwxr-xr-x   2 root root      4096 2012-06-13 04:36 ./source/x/x11/src/xcb
+-rw-r--r--   1 root root    185164 2009-10-14 09:16 ./source/x/x11/src/xcb/libpthread-stubs-0.3.tar.xz
+-rw-r--r--   1 root root    316732 2012-03-09 14:45 ./source/x/x11/src/xcb/libxcb-1.8.1.tar.xz
+-rw-r--r--   1 root root    104572 2012-03-23 15:28 ./source/x/x11/src/xcb/xcb-proto-1.7.1.tar.xz
+-rw-r--r--   1 root root    237644 2011-04-25 16:47 ./source/x/x11/src/xcb/xcb-util-0.3.8.tar.xz
+-rw-r--r--   1 root root    257404 2012-05-31 04:00 ./source/x/x11/src/xcb/xcb-util-image-0.3.9.tar.xz
+-rw-r--r--   1 root root    234456 2012-05-31 04:05 ./source/x/x11/src/xcb/xcb-util-keysyms-0.3.9.tar.xz
+-rw-r--r--   1 root root    227516 2011-04-25 17:04 ./source/x/x11/src/xcb/xcb-util-renderutil-0.3.8.tar.xz
+-rw-r--r--   1 root root    260548 2012-05-31 04:09 ./source/x/x11/src/xcb/xcb-util-wm-0.3.9.tar.xz
+-rw-r--r--   1 root root    232228 2012-03-23 22:46 ./source/x/x11/src/xcb/xpyb-1.3.1.tar.xz
+drwxr-xr-x   2 root root      4096 2012-07-10 19:08 ./source/x/x11/src/xserver
+-rw-r--r--   1 root root   4312160 2012-07-09 01:21 ./source/x/x11/src/xserver/xorg-server-1.12.3.tar.xz
+-rwxr-xr-x   1 root root     12129 2010-02-22 17:35 ./source/x/x11/x11.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/x/xdg-user-dirs
+-rw-r--r--   1 root root       281 2010-12-15 02:17 ./source/x/xdg-user-dirs/doinst.sh.gz
+-rw-r--r--   1 root root       940 2011-02-01 06:53 ./source/x/xdg-user-dirs/slack-desc
+-rw-r--r--   1 root root    166616 2011-05-03 08:40 ./source/x/xdg-user-dirs/xdg-user-dirs-0.14.tar.xz
+-rwxr-xr-x   1 root root      3249 2012-06-25 22:55 ./source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-01-20 23:46 ./source/x/xdg-utils
+-rw-r--r--   1 root root      1432 2011-01-20 23:46 ./source/x/xdg-utils/doinst.sh.gz
+-rw-r--r--   1 root root      1010 2008-08-01 05:42 ./source/x/xdg-utils/slack-desc
+-rw-r--r--   1 root root    277034 2011-01-01 10:13 ./source/x/xdg-utils/xdg-utils-1.1.0-rc1.tar.bz2
+-rwxr-xr-x   1 root root       327 2009-02-02 19:15 ./source/x/xdg-utils/xdg-utils-cvs_checkout.sh
+-rwxr-xr-x   1 root root      2656 2011-01-22 04:11 ./source/x/xdg-utils/xdg-utils.SlackBuild
+-rw-r--r--   1 root root       121 2008-07-12 04:41 ./source/x/xdg-utils/xdg-utils.info
+drwxr-xr-x   2 root root      4096 2012-06-26 14:31 ./source/x/xterm
+-rw-r--r--   1 root root       172 2012-06-26 14:31 ./source/x/xterm/doinst.sh.gz
+-rw-r--r--   1 root root       764 2007-02-11 23:54 ./source/x/xterm/slack-desc
+-rw-r--r--   1 root root    725284 2012-06-26 10:55 ./source/x/xterm/xterm-281.tar.xz
+-rwxr-xr-x   1 root root      4074 2012-06-26 14:32 ./source/x/xterm/xterm.SlackBuild
+drwxr-xr-x  46 root root      4096 2012-09-09 02:56 ./source/xap
+drwxr-xr-x   2 root root      4096 2012-07-03 23:05 ./source/xap/MPlayer
+-rw-r--r--   1 root root    223118 2011-09-30 13:23 ./source/xap/MPlayer/Blue-1.8.tar.bz2
+-rwxr-xr--   1 root root     20012 2012-07-18 19:19 ./source/xap/MPlayer/MPlayer.SlackBuild
+-rw-r--r--   1 root root   5406048 2012-07-03 22:22 ./source/xap/MPlayer/MPlayer_nolibdvdcss-20120701.tar.xz
+-rw-r--r--   1 root root   4995520 2012-05-14 18:49 ./source/xap/MPlayer/ffmpeg-20120514.tar.xz
+-rw-r--r--   1 root root      1097 2006-11-05 14:33 ./source/xap/MPlayer/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-16 01:48 ./source/xap/audacious
+drwxr-xr-x   2 root root      4096 2012-08-16 01:52 ./source/xap/audacious-plugins
+-rw-r--r--   1 root root   1422496 2012-08-11 20:16 ./source/xap/audacious-plugins/audacious-plugins-3.3.1.tar.xz
+-rwxr-xr-x   1 root root      4075 2012-06-25 22:55 ./source/xap/audacious-plugins/audacious-plugins.SlackBuild
+-rw-r--r--   1 root root       892 2007-03-08 06:08 ./source/xap/audacious-plugins/slack-desc
+-rw-r--r--   1 root root    420132 2012-08-11 20:15 ./source/xap/audacious/audacious-3.3.1.tar.xz
+-rwxr-xr-x   1 root root      4473 2012-08-21 19:30 ./source/xap/audacious/audacious.SlackBuild
+-rw-r--r--   1 root root       121 2010-04-09 21:15 ./source/xap/audacious/doinst.sh.gz
+-rw-r--r--   1 root root      1075 2007-03-08 05:46 ./source/xap/audacious/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-08 18:00 ./source/xap/blackbox
+-rw-r--r--   1 root root    176564 2009-09-03 11:39 ./source/xap/blackbox/bbkeys-0.9.1.tar.xz
+-rw-r--r--   1 root root       964 2009-09-03 11:39 ./source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch.gz
+-rw-r--r--   1 root root    409496 2009-09-03 11:39 ./source/xap/blackbox/blackbox-0.70.1.tar.xz
+-rwxr-xr-x   1 root root      6475 2012-08-08 18:01 ./source/xap/blackbox/blackbox.SlackBuild
+-rw-r--r--   1 root root       900 2002-05-05 23:41 ./source/xap/blackbox/slack-desc
+-rw-r--r--   1 root root       221 2012-08-08 17:58 ./source/xap/blackbox/startblackbox.gz
+-rw-r--r--   1 root root       413 2012-07-25 03:36 ./source/xap/blackbox/textpropertytostring-unconditional.diff.gz
+-rw-r--r--   1 root root       341 2012-08-08 17:58 ./source/xap/blackbox/xinitrc.blackbox.gz
+drwxr-xr-x   2 root root      4096 2011-03-07 19:31 ./source/xap/blueman
+-rw-r--r--   1 root root      3648 2011-02-01 00:16 ./source/xap/blueman/blueman-open
+-rw-r--r--   1 root root    410120 2011-03-07 19:30 ./source/xap/blueman/blueman-r708.tar.xz
+-rw-r--r--   1 root root       330 2010-04-11 04:24 ./source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff.gz
+-rwxr-xr-x   1 root root      4314 2012-06-27 03:11 ./source/xap/blueman/blueman.SlackBuild
+-rw-r--r--   1 root root       361 2009-10-31 03:20 ./source/xap/blueman/doinst.sh.gz
+-rw-r--r--   1 root root       882 2010-05-02 07:44 ./source/xap/blueman/slack-desc
+drwxr-xr-x   2 root root      4096 2010-02-19 18:36 ./source/xap/electricsheep
+-rw-r--r--   1 root root      1306 2009-01-07 22:42 ./source/xap/electricsheep/README.slackware
+-rw-r--r--   1 root root   3116176 2009-03-06 00:30 ./source/xap/electricsheep/electricsheep-20090306.tar.xz
+-rwxr-xr--   1 root root      9750 2010-02-19 18:37 ./source/xap/electricsheep/electricsheep.SlackBuild
+-rw-r--r--   1 root root       268 2009-07-01 19:53 ./source/xap/electricsheep/electricsheep.mplayer.diff.gz
+-rw-r--r--   1 root root       524 2009-01-07 21:38 ./source/xap/electricsheep/electricsheep_gnome-open.patch
+-rw-r--r--   1 root root      1116 2008-12-15 23:44 ./source/xap/electricsheep/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-09 04:35 ./source/xap/fluxbox
+-rw-r--r--   1 root root    672924 2011-10-29 15:02 ./source/xap/fluxbox/fluxbox-1.3.2.tar.xz
+-rwxr-xr-x   1 root root      4010 2012-08-08 19:18 ./source/xap/fluxbox/fluxbox.SlackBuild
+-rw-r--r--   1 root root       323 2012-08-09 04:35 ./source/xap/fluxbox/fluxbox.startfluxbox.dbus.diff.gz
+-rw-r--r--   1 root root       687 2005-07-21 19:03 ./source/xap/fluxbox/slack-desc
+-rw-r--r--   1 root root       339 2012-08-08 19:16 ./source/xap/fluxbox/xinitrc.fluxbox.gz
+drwxr-xr-x   2 root root      4096 2012-08-27 15:59 ./source/xap/fvwm
+-rw-r--r--   1 root root     23007 2007-02-18 02:02 ./source/xap/fvwm/ancient-icons.tar.gz
+-rw-r--r--   1 root root       296 2011-04-24 01:11 ./source/xap/fvwm/doinst.sh.gz
+-rw-r--r--   1 root root   2103456 2012-04-20 11:10 ./source/xap/fvwm/fvwm-2.6.5.tar.xz
+-rwxr-xr-x   1 root root      4265 2012-08-27 16:00 ./source/xap/fvwm/fvwm.SlackBuild
+-rw-r--r--   1 root root       823 2011-04-24 01:16 ./source/xap/fvwm/slack-desc
+-rw-r--r--   1 root root       217 2012-08-09 04:42 ./source/xap/fvwm/startfvwm2.gz
+-rw-r--r--   1 root root       360 2012-08-10 23:46 ./source/xap/fvwm/xinitrc.fvwm2.gz
+drwxr-xr-x   2 root root      4096 2012-08-14 17:33 ./source/xap/geeqie
+-rw-r--r--   1 root root       163 2010-03-11 23:20 ./source/xap/geeqie/doinst.sh.gz
+-rw-r--r--   1 root root   1140648 2012-08-14 17:33 ./source/xap/geeqie/geeqie-1.1.tar.xz
+-rwxr-xr-x   1 root root      3800 2012-08-14 17:34 ./source/xap/geeqie/geeqie.SlackBuild
+-rw-r--r--   1 root root       768 2012-07-22 17:19 ./source/xap/geeqie/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-23 00:41 ./source/xap/gftp
+-rw-r--r--   1 root root   1687167 2008-12-02 14:07 ./source/xap/gftp/gftp-2.0.19.tar.bz2
+-rwxr-xr-x   1 root root      3418 2012-07-04 22:16 ./source/xap/gftp/gftp.SlackBuild
+-rw-r--r--   1 root root       304 2008-12-02 20:08 ./source/xap/gftp/gftp.desktop.gz
+-rw-r--r--   1 root root       899 2008-02-11 03:44 ./source/xap/gftp/slack-desc
+drwxr-xr-x   2 root root      4096 2012-08-27 17:05 ./source/xap/gimp
+-rw-r--r--   1 root root  15608688 2012-08-23 20:39 ./source/xap/gimp/gimp-2.8.2.tar.xz
+-rwxr-xr-x   1 root root      4115 2012-06-25 22:55 ./source/xap/gimp/gimp.SlackBuild
+-rw-r--r--   1 root root       928 2003-01-29 03:18 ./source/xap/gimp/slack-desc
+drwxr-xr-x   2 root root      4096 2011-02-12 19:40 ./source/xap/gkrellm
+-rw-r--r--   1 root root    765011 2010-10-07 19:50 ./source/xap/gkrellm/gkrellm-2.3.5.tar.bz2
+-rw-r--r--   1 root root     12374 2004-02-01 16:30 ./source/xap/gkrellm/gkrellm-countdown-0.1.1.tar.gz
+-rwxr-xr-x   1 root root      4597 2012-07-04 17:17 ./source/xap/gkrellm/gkrellm.SlackBuild
+-rw-r--r--   1 root root       211 2008-10-26 01:35 ./source/xap/gkrellm/gkrellm.theme.defaults.diff.gz
+-rw-r--r--   1 root root       971 2004-04-29 18:52 ./source/xap/gkrellm/slack-desc
+drwxr-xr-x   2 root root      4096 2011-03-21 22:21 ./source/xap/gnuchess
+-rw-r--r--   1 root root    142963 2004-01-19 11:50 ./source/xap/gnuchess/Sjeng-Free-11.2.tar.bz2
+-rw-r--r--   1 root root       652 2004-10-27 05:47 ./source/xap/gnuchess/chess.png
+-rw-r--r--   1 root root    462386 2008-02-22 15:57 ./source/xap/gnuchess/eboard-1.1.1.tar.bz2
+-rw-r--r--   1 root root       458 2010-02-20 03:54 ./source/xap/gnuchess/eboard.assert.diff.gz
+-rw-r--r--   1 root root       224 2004-10-27 06:07 ./source/xap/gnuchess/eboard.desktop
+-rw-r--r--   1 root root    210780 2011-01-25 19:12 ./source/xap/gnuchess/gnuchess-5.08.tar.xz
+-rwxr-xr-x   1 root root      5629 2011-03-21 22:24 ./source/xap/gnuchess/gnuchess.SlackBuild
+-rw-r--r--   1 root root       796 2004-10-27 22:53 ./source/xap/gnuchess/slack-desc
+-rw-r--r--   1 root root   1586180 2011-02-21 00:54 ./source/xap/gnuchess/xboard-4.5.1.tar.xz
+-rw-r--r--   1 root root       238 2011-03-21 22:22 ./source/xap/gnuchess/xboard.desktop
+drwxr-xr-x   2 root root      4096 2012-08-19 16:56 ./source/xap/gnuplot
+-rw-r--r--   1 root root   3807404 2012-03-09 04:34 ./source/xap/gnuplot/gnuplot-4.6.0.tar.xz
+-rwxr-xr-x   1 root root      4214 2012-08-19 17:00 ./source/xap/gnuplot/gnuplot.SlackBuild
+-rw-r--r--   1 root root      1105 2002-03-16 08:23 ./source/xap/gnuplot/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-25 22:55 ./source/xap/gucharmap
+-rw-r--r--   1 root root       166 2012-06-13 05:07 ./source/xap/gucharmap/doinst.sh.gz
+-rw-r--r--   1 root root   2031040 2012-04-16 17:41 ./source/xap/gucharmap/gucharmap-3.4.1.tar.xz
+-rwxr-xr-x   1 root root      3430 2012-06-25 22:55 ./source/xap/gucharmap/gucharmap.SlackBuild
+-rw-r--r--   1 root root       669 2004-10-13 19:31 ./source/xap/gucharmap/slack-desc
+drwxr-xr-x   2 root root      4096 2012-05-21 18:02 ./source/xap/gv
+-rw-r--r--   1 root root    509972 2011-12-02 13:17 ./source/xap/gv/gv-3.7.3.tar.xz
+-rwxr-xr-x   1 root root      3944 2012-05-22 18:48 ./source/xap/gv/gv.SlackBuild
+-rw-r--r--   1 root root       261 2012-05-13 16:19 ./source/xap/gv/gv.libXaw3d.diff.gz
+-rw-r--r--   1 root root       823 2002-03-15 04:27 ./source/xap/gv/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-28 15:23 ./source/xap/imagemagick
+-rw-r--r--   1 root root   7812544 2012-06-28 11:24 ./source/xap/imagemagick/ImageMagick-6.7.7-10.tar.xz
+-rwxr-xr-x   1 root root      5793 2012-06-28 15:23 ./source/xap/imagemagick/imagemagick.SlackBuild
+-rw-r--r--   1 root root      1002 2004-04-11 20:51 ./source/xap/imagemagick/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-07 00:59 ./source/xap/mozilla-firefox
+-rw-r--r--   1 root root  83710112 2012-09-05 15:43 ./source/xap/mozilla-firefox/firefox-15.0.1.source.tar.bz2
+-rw-r--r--   1 root root       189 2012-09-05 15:43 ./source/xap/mozilla-firefox/firefox-15.0.1.source.tar.bz2.asc
+-rw-r--r--   1 root root       327 2008-06-17 17:19 ./source/xap/mozilla-firefox/firefox.moz_plugin_path.diff.gz
+-rw-r--r--   1 root root     24263 2009-06-18 08:34 ./source/xap/mozilla-firefox/firefox.png
+-rw-r--r--   1 root root       462 2009-07-01 06:05 ./source/xap/mozilla-firefox/mimeTypes.rdf.gz
+-rw-r--r--   1 root root       680 2009-07-01 13:28 ./source/xap/mozilla-firefox/mozilla-firefox-mimeTypes-fix.diff.gz
+-rwxr-xr-x   1 root root      7783 2012-07-17 20:51 ./source/xap/mozilla-firefox/mozilla-firefox.SlackBuild
+-rw-r--r--   1 root root      2620 2009-07-01 06:10 ./source/xap/mozilla-firefox/mozilla-firefox.desktop
+-rw-r--r--   1 root root       993 2005-03-08 04:51 ./source/xap/mozilla-firefox/slack-desc
+drwxr-xr-x   2 root root      4096 2012-09-09 18:00 ./source/xap/mozilla-thunderbird
+-rw-r--r--   1 root root       312 2012-03-28 18:01 ./source/xap/mozilla-thunderbird/mozilla-firefox.xpcom_arm.patch.gz
+-rwxr-xr-x   1 root root      8675 2012-07-17 20:52 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild
+-rw-r--r--   1 root root      3378 2005-03-08 05:13 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.desktop
+-rw-r--r--   1 root root      1172 2005-03-08 04:50 ./source/xap/mozilla-thunderbird/slack-desc
+-rw-r--r--   1 root root 105942872 2012-09-07 14:11 ./source/xap/mozilla-thunderbird/thunderbird-15.0.1.source.tar.bz2
+-rw-r--r--   1 root root       189 2012-09-07 14:11 ./source/xap/mozilla-thunderbird/thunderbird-15.0.1.source.tar.bz2.asc
+-rw-r--r--   1 root root     47617 2006-02-18 17:00 ./source/xap/mozilla-thunderbird/thunderbird.png
+drwxr-xr-x   2 root root      4096 2012-07-20 15:35 ./source/xap/network-manager-applet
+-rw-r--r--   1 root root       310 2012-07-20 15:35 ./source/xap/network-manager-applet/doinst.sh.gz
+-rw-r--r--   1 root root   1102856 2012-03-24 01:08 ./source/xap/network-manager-applet/network-manager-applet-0.9.4.1.tar.xz
+-rwxr-xr-x   1 root root      3421 2012-07-24 21:31 ./source/xap/network-manager-applet/network-manager-applet.SlackBuild
+-rw-r--r--   1 root root       832 2011-10-26 15:39 ./source/xap/network-manager-applet/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-10 17:43 ./source/xap/pan
+-rw-r--r--   1 root root   1270324 2012-06-29 22:31 ./source/xap/pan/pan-0.139.tar.xz
+-rwxr-xr-x   1 root root      4046 2012-07-10 17:42 ./source/xap/pan/pan.SlackBuild
+-rw-r--r--   1 root root       236 2012-07-10 17:43 ./source/xap/pan/pan.gcc47.diff.gz
+-rw-r--r--   1 root root       757 2012-05-13 15:17 ./source/xap/pan/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-12 19:01 ./source/xap/pidgin
+-rw-r--r--   1 root root       355 2012-05-02 03:59 ./source/xap/pidgin/fix-gmain_h-compile-error.diff.gz
+-rw-r--r--   1 root root   7357724 2012-07-06 15:33 ./source/xap/pidgin/pidgin-2.10.6.tar.xz
+-rw-r--r--   1 root root    604129 2010-05-18 16:51 ./source/xap/pidgin/pidgin-encryption-3.1.tar.gz
+-rwxr-xr-x   1 root root      6975 2012-07-12 19:01 ./source/xap/pidgin/pidgin.SlackBuild
+-rw-r--r--   1 root root       926 2008-03-09 08:06 ./source/xap/pidgin/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-26 02:31 ./source/xap/rdesktop
+-rw-r--r--   1 root root    233500 2012-01-09 15:21 ./source/xap/rdesktop/rdesktop-1.7.1.tar.xz
+-rwxr-xr-x   1 root root      3429 2012-07-04 17:26 ./source/xap/rdesktop/rdesktop.SlackBuild
+-rw-r--r--   1 root root       854 2006-09-12 01:52 ./source/xap/rdesktop/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/xap/rxvt
+-rw-r--r--   1 root root    493199 2003-03-26 06:47 ./source/xap/rxvt/rxvt-2.7.10.tar.bz2
+-rwxr-xr-x   1 root root      3749 2012-01-12 19:26 ./source/xap/rxvt/rxvt.SlackBuild
+-rw-r--r--   1 root root      2002 2003-06-08 04:09 ./source/xap/rxvt/rxvt.utempter.diff.gz
+-rw-r--r--   1 root root       880 2002-03-10 07:02 ./source/xap/rxvt/slack-desc
+drwxr-xr-x   2 root root      4096 2012-06-30 04:10 ./source/xap/sane
+-rw-r--r--   1 root root       133 2006-09-23 08:33 ./source/xap/sane/dll.conf.additions.gz
+-rw-r--r--   1 root root       285 2008-02-12 16:23 ./source/xap/sane/doinst.sh.gz
+-rw-r--r--   1 root root       858 2012-04-17 09:51 ./source/xap/sane/sane-backends-1.0.22-v4l.diff.gz
+-rw-r--r--   1 root root   4064768 2011-02-14 04:07 ./source/xap/sane/sane-backends-1.0.22.tar.bz2
+-rw-r--r--   1 root root       341 2010-01-20 01:54 ./source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff.gz
+-rw-r--r--   1 root root    190172 2005-09-18 07:21 ./source/xap/sane/sane-frontends-1.0.14.tar.bz2
+-rwxr-xr-x   1 root root      5172 2012-08-10 20:08 ./source/xap/sane/sane.SlackBuild
+-rw-r--r--   1 root root       776 2002-04-04 02:41 ./source/xap/sane/slack-desc
+drwxr-xr-x   3 root root      4096 2012-09-10 17:02 ./source/xap/seamonkey
+-rw-r--r--   1 root root       231 2007-06-01 23:47 ./source/xap/seamonkey/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2012-01-11 17:53 ./source/xap/seamonkey/pkgconfig
+-rw-r--r--   1 root root       320 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc
+-rw-r--r--   1 root root       305 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-js.pc
+-rw-r--r--   1 root root       327 2011-11-30 00:44 ./source/xap/seamonkey/pkgconfig/seamonkey-libxul.pc
+-rw-r--r--   1 root root       308 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc
+-rw-r--r--   1 root root       313 2012-04-30 17:42 ./source/xap/seamonkey/pkgconfig/seamonkey-nss.pc
+-rw-r--r--   1 root root       287 2012-01-10 16:25 ./source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc
+-rw-r--r--   1 root root       372 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc
+-rw-r--r--   1 root root  85072972 2012-09-09 05:18 ./source/xap/seamonkey/seamonkey-2.12.1.source.tar.xz
+-rw-r--r--   1 root root     12796 2006-02-09 03:17 ./source/xap/seamonkey/seamonkey-icon.png
+-rw-r--r--   1 root root       185 2006-02-09 03:40 ./source/xap/seamonkey/seamonkey-mail-icon.png
+-rw-r--r--   1 root root       207 2006-02-09 03:23 ./source/xap/seamonkey/seamonkey-mail.desktop
+-rwxr-xr-x   1 root root     10425 2012-08-30 18:18 ./source/xap/seamonkey/seamonkey.SlackBuild
+-rw-r--r--   1 root root       178 2006-02-09 03:23 ./source/xap/seamonkey/seamonkey.desktop
+-rw-r--r--   1 root root       894 2009-11-10 01:43 ./source/xap/seamonkey/slack-desc
+drwxr-xr-x   2 root root      4096 2009-05-19 20:05 ./source/xap/seyon
+-rw-r--r--   1 root root       713 1999-05-09 22:46 ./source/xap/seyon/seyon-2.20c.lsm
+-rw-r--r--   1 root root    167487 1999-05-09 22:47 ./source/xap/seyon/seyon-2.20c.tar.gz
+-rwxr-xr-x   1 root root      4347 2012-01-12 19:28 ./source/xap/seyon/seyon.SlackBuild
+-rw-r--r--   1 root root     36723 2005-01-03 22:32 ./source/xap/seyon/seyon_2.20c-16.diff.gz
+-rw-r--r--   1 root root      1065 2002-03-24 00:53 ./source/xap/seyon/slack-desc
+lrwxrwxrwx   1 root root         9 2009-08-23 23:36 ./source/xap/vim-gvim -> ../ap/vim
+drwxr-xr-x   2 root root      4096 2012-08-13 16:54 ./source/xap/windowmaker
+-rw-r--r--   1 root root   1831732 2012-05-27 00:35 ./source/xap/windowmaker/WindowMaker-0.95.3.tar.xz
+-rw-r--r--   1 root root    203168 1999-04-01 14:30 ./source/xap/windowmaker/WindowMaker-extra-0.1.tar.xz
+-rw-r--r--   1 root root       385 2012-07-29 20:34 ./source/xap/windowmaker/WindowMaker.noopensusemenu.diff.gz
+-rw-r--r--   1 root root       917 2004-10-28 06:46 ./source/xap/windowmaker/slack-desc
+-rwxr-xr-x   1 root root      5135 2012-08-13 16:54 ./source/xap/windowmaker/windowmaker.SlackBuild
+-rw-r--r--   1 root root       729 2012-02-15 00:25 ./source/xap/windowmaker/wmaker.inst.diff.gz
+-rw-r--r--   1 root root       460 2012-07-25 03:30 ./source/xap/windowmaker/xinitrc.wmaker.gz
+drwxr-xr-x   2 root root      4096 2011-01-22 18:19 ./source/xap/x11-ssh-askpass
+-rw-r--r--   1 root root       533 2009-07-11 03:15 ./source/xap/x11-ssh-askpass/README
+-rw-r--r--   1 root root       774 2012-07-22 17:20 ./source/xap/x11-ssh-askpass/slack-desc
+-rw-r--r--   1 root root     29229 2009-07-20 23:44 ./source/xap/x11-ssh-askpass/x11-ssh-askpass-1.2.4.1.tar.gz
+-rwxr-xr-x   1 root root      1941 2011-02-01 06:39 ./source/xap/x11-ssh-askpass/x11-ssh-askpass.SlackBuild
+-rw-r--r--   1 root root       349 2009-07-11 03:15 ./source/xap/x11-ssh-askpass/x11-ssh-askpass.info
+-rw-r--r--   1 root root       261 2008-03-29 00:07 ./source/xap/x11-ssh-askpass/xprofile.sample
+drwxr-xr-x   2 root root      4096 2012-01-12 22:44 ./source/xap/x3270
+-rw-r--r--   1 root root       391 2007-04-02 02:36 ./source/xap/x3270/doinst.sh.gz
+-rw-r--r--   1 root root       766 2002-03-12 06:49 ./source/xap/x3270/slack-desc
+-rw-r--r--   1 root root    771256 2012-01-12 22:43 ./source/xap/x3270/x3270-3.3.12ga7.tar.xz
+-rwxr-xr-x   1 root root      4166 2012-07-04 22:14 ./source/xap/x3270/x3270.SlackBuild
+drwxr-xr-x   2 root root      4096 2010-10-16 19:48 ./source/xap/xaos
+-rw-r--r--   1 root root       875 2010-10-16 17:46 ./source/xap/xaos/slack-desc
+-rw-r--r--   1 root root   1121380 2010-10-16 17:17 ./source/xap/xaos/xaos-3.5.tar.xz
+-rw-r--r--   1 root root      2796 2010-10-16 19:47 ./source/xap/xaos/xaos.6.gz
+-rwxr-xr-x   1 root root      5060 2010-10-16 19:51 ./source/xap/xaos/xaos.SlackBuild
+-rw-r--r--   1 root root       161 2010-05-24 16:48 ./source/xap/xaos/xaos.desktop
+-rw-r--r--   1 root root     14980 2010-05-24 16:48 ./source/xap/xaos/xaos.png
+drwxr-xr-x   2 root root      4096 2010-06-06 07:41 ./source/xap/xchat
+-rw-r--r--   1 root root       620 2008-02-11 03:44 ./source/xap/xchat/slack-desc
+-rw-r--r--   1 root root   1509993 2010-05-30 06:41 ./source/xap/xchat/xchat-2.8.8.tar.bz2
+-rwxr-xr-x   1 root root      3590 2012-07-04 17:16 ./source/xap/xchat/xchat.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-01-12 22:54 ./source/xap/xfractint
+-rw-r--r--   1 root root    103531 2002-03-14 20:57 ./source/xap/xfractint/palette.maps.tar.gz
+-rw-r--r--   1 root root       871 2002-03-14 20:25 ./source/xap/xfractint/slack-desc
+-rw-r--r--   1 root root   1084712 2011-06-14 01:04 ./source/xap/xfractint/xfractint-20.04p11.tar.xz
+-rwxr-xr-x   1 root root      4269 2012-01-12 22:54 ./source/xap/xfractint/xfractint.SlackBuild
+drwxr-xr-x   2 root root      4096 2011-03-19 22:56 ./source/xap/xgames
+-rw-r--r--   1 root root       269 1999-08-04 18:49 ./source/xap/xgames/maze.diff.gz
+-rw-r--r--   1 root root      7945 1994-10-22 00:44 ./source/xap/xgames/maze.tar.gz
+-rw-r--r--   1 root root       696 2007-03-01 22:04 ./source/xap/xgames/slack-desc
+-rw-r--r--   1 root root       871 2007-02-22 02:20 ./source/xap/xgames/spider.diff.gz
+-rw-r--r--   1 root root    130637 1993-12-04 17:22 ./source/xap/xgames/spider.tar.gz
+-rw-r--r--   1 root root       287 1999-08-04 18:54 ./source/xap/xgames/xcolormap.diff.gz
+-rw-r--r--   1 root root      2808 1993-12-04 17:18 ./source/xap/xgames/xcolormap.tar.gz
+-rw-r--r--   1 root root      5937 1993-12-04 17:18 ./source/xap/xgames/xcuckoo-1.1.tar.gz
+-rw-r--r--   1 root root       228 2007-02-28 19:11 ./source/xap/xgames/xcuckoo.diff.gz
+-rwxr-xr-x   1 root root      4981 2011-03-20 17:12 ./source/xap/xgames/xgames.SlackBuild
+-rw-r--r--   1 root root      1150 2009-08-22 20:58 ./source/xap/xgames/xlander-2009-07-18.diff.gz
+-rw-r--r--   1 root root      2543 2007-03-01 18:44 ./source/xap/xgames/xlander.fixes.diff.gz
+-rw-r--r--   1 root root     15612 1995-06-17 19:23 ./source/xap/xgames/xlander.tar.gz
+-rw-r--r--   1 root root     12791 2008-10-25 13:16 ./source/xap/xgames/xminesweep3.0.tar.gz
+-rw-r--r--   1 root root     22849 1999-08-04 19:05 ./source/xap/xgames/xneko.tar.gz
+-rw-r--r--   1 root root     21694 1993-12-02 07:19 ./source/xap/xgames/xroach.tar.gz
+-rw-r--r--   1 root root     56752 2001-12-15 23:45 ./source/xap/xgames/xsnow-1.42.tar.gz
+drwxr-xr-x   2 root root      4096 2012-09-08 19:03 ./source/xap/xine-lib
+-rw-r--r--   1 root root       927 2003-08-12 00:43 ./source/xap/xine-lib/slack-desc
+-rw-r--r--   1 root root   5929176 2012-06-09 17:26 ./source/xap/xine-lib/xine-lib-1.1.21.tar.xz
+-rwxr-xr-x   1 root root      3485 2012-09-08 17:45 ./source/xap/xine-lib/xine-lib.SlackBuild
+-rw-r--r--   1 root root       329 2010-11-06 21:02 ./source/xap/xine-lib/xine-lib.XvMClib.h.diff.gz
+drwxr-xr-x   2 root root      4096 2012-09-09 17:47 ./source/xap/xine-ui
+-rw-r--r--   1 root root       832 2003-08-12 01:07 ./source/xap/xine-ui/slack-desc
+-rw-r--r--   1 root root   1797136 2010-03-06 01:43 ./source/xap/xine-ui/xine-ui-0.99.6.tar.xz
+-rwxr-xr-x   1 root root      3207 2012-09-09 17:48 ./source/xap/xine-ui/xine-ui.SlackBuild
+-rw-r--r--   1 root root       202 2012-09-09 17:47 ./source/xap/xine-ui/xine-ui.no.deprecated.curl.headers.diff.gz
+-rw-r--r--   1 root root       258 2007-05-04 22:27 ./source/xap/xine-ui/xine.desktop.gz
+drwxr-xr-x   2 root root      4096 2012-05-25 16:18 ./source/xap/xlockmore
+-rw-r--r--   1 root root       225 2002-02-23 22:23 ./source/xap/xlockmore/l-bob.README
+-rw-r--r--   1 root root     27870 1998-04-01 15:09 ./source/xap/xlockmore/l-bob.xbm
+-rw-r--r--   1 root root     15190 1998-04-01 15:09 ./source/xap/xlockmore/l-linux.xbm
+-rw-r--r--   1 root root      7025 2002-02-23 21:40 ./source/xap/xlockmore/s-bob.xbm
+-rw-r--r--   1 root root       922 2002-03-24 00:54 ./source/xap/xlockmore/slack-desc
+-rw-r--r--   1 root root   1576444 2012-04-27 00:24 ./source/xap/xlockmore/xlockmore-5.39.tar.xz
+-rwxr-xr-x   1 root root      3913 2012-05-25 16:18 ./source/xap/xlockmore/xlockmore.SlackBuild
+-rw-r--r--   1 root root       371 2002-05-30 04:25 ./source/xap/xlockmore/xlockmore.bitmap.diff.gz
+drwxr-xr-x   2 root root      4096 2010-03-22 19:03 ./source/xap/xmms
+-rw-r--r--   1 root root       834 2004-02-24 02:30 ./source/xap/xmms/slack-desc
+-rw-r--r--   1 root root   2581032 2007-11-16 22:53 ./source/xap/xmms/xmms-1.2.11.tar.bz2
+-rwxr-xr-x   1 root root      3385 2010-03-22 19:05 ./source/xap/xmms/xmms.SlackBuild
+-rw-r--r--   1 root root       525 2008-09-11 20:50 ./source/xap/xmms/xmms.desktop
+-rw-r--r--   1 root root       279 2008-09-12 20:50 ./source/xap/xmms/xmms.gtk.doublesize.diff.gz
+-rw-r--r--   1 root root      2475 2008-01-04 23:53 ./source/xap/xmms/xmms.png
+-rw-r--r--   1 root root       260 2009-06-09 20:19 ./source/xap/xmms/xmms.wmxmms_vis_depth_workaround.diff.gz
+drwxr-xr-x   2 root root      4096 2010-02-20 01:05 ./source/xap/xpaint
+-rw-r--r--   1 root root       902 2002-03-12 23:40 ./source/xap/xpaint/slack-desc
+-rw-r--r--   1 root root    795772 2010-02-12 19:48 ./source/xap/xpaint/xpaint-2.8.16.tar.bz2
+-rwxr-xr-x   1 root root      4009 2010-02-20 01:05 ./source/xap/xpaint/xpaint.SlackBuild
+drwxr-xr-x   4 root root      4096 2012-08-01 16:30 ./source/xap/xpdf
+-rw-r--r--   1 root root       325 2010-01-11 04:59 ./source/xap/xpdf/doinst.sh.gz
+drwxr-xr-x   2 root root      4096 2010-01-11 05:01 ./source/xap/xpdf/lang
+-rw-r--r--   1 root root       207 2008-03-02 07:24 ./source/xap/xpdf/lang/xpdf-arabic.diff.gz
+-rw-r--r--   1 root root      1058 2004-07-18 23:14 ./source/xap/xpdf/lang/xpdf-arabic.tar.gz
+-rw-r--r--   1 root root       375 2008-03-02 07:46 ./source/xap/xpdf/lang/xpdf-chinese-simplified.diff.gz
+-rw-r--r--   1 root root    835960 2004-07-27 22:29 ./source/xap/xpdf/lang/xpdf-chinese-simplified.tar.gz
+-rw-r--r--   1 root root       354 2008-03-02 07:45 ./source/xap/xpdf/lang/xpdf-chinese-traditional.diff.gz
+-rw-r--r--   1 root root    794604 2004-07-27 22:30 ./source/xap/xpdf/lang/xpdf-chinese-traditional.tar.gz
+-rw-r--r--   1 root root       242 2008-03-02 07:27 ./source/xap/xpdf/lang/xpdf-cyrillic.diff.gz
+-rw-r--r--   1 root root      1660 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-cyrillic.tar.gz
+-rw-r--r--   1 root root       236 2008-03-02 07:28 ./source/xap/xpdf/lang/xpdf-greek.diff.gz
+-rw-r--r--   1 root root      1263 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-greek.tar.gz
+-rw-r--r--   1 root root       224 2008-03-02 07:28 ./source/xap/xpdf/lang/xpdf-hebrew.diff.gz
+-rw-r--r--   1 root root      1314 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-hebrew.tar.gz
+-rw-r--r--   1 root root       750 2008-03-02 07:48 ./source/xap/xpdf/lang/xpdf-japanese.diff.gz
+-rw-r--r--   1 root root    494803 2004-07-27 22:30 ./source/xap/xpdf/lang/xpdf-japanese.tar.gz
+-rw-r--r--   1 root root       312 2008-03-02 07:34 ./source/xap/xpdf/lang/xpdf-korean.diff.gz
+-rw-r--r--   1 root root    470455 2005-07-07 18:05 ./source/xap/xpdf/lang/xpdf-korean.tar.gz
+-rw-r--r--   1 root root       200 2008-03-02 07:36 ./source/xap/xpdf/lang/xpdf-latin2.diff.gz
+-rw-r--r--   1 root root      1435 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-latin2.tar.gz
+-rw-r--r--   1 root root       231 2008-03-02 07:36 ./source/xap/xpdf/lang/xpdf-thai.diff.gz
+-rw-r--r--   1 root root      1873 2004-07-18 23:17 ./source/xap/xpdf/lang/xpdf-thai.tar.gz
+-rw-r--r--   1 root root       210 2008-03-02 07:37 ./source/xap/xpdf/lang/xpdf-turkish.diff.gz
+-rw-r--r--   1 root root      1140 2004-07-18 23:17 ./source/xap/xpdf/lang/xpdf-turkish.tar.gz
+drwxr-xr-x   2 root root      4096 2012-08-01 16:30 ./source/xap/xpdf/patches
+-rw-r--r--   1 root root       542 2011-02-09 23:23 ./source/xap/xpdf/patches/03-float.patch.gz
+-rw-r--r--   1 root root      1050 2007-07-30 18:51 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch
+-rw-r--r--   1 root root       189 2007-07-30 18:51 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch.sig
+-rw-r--r--   1 root root     20843 2007-11-07 18:16 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch
+-rw-r--r--   1 root root       189 2007-11-07 18:16 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch.sig
+-rw-r--r--   1 root root     30727 2009-04-16 19:18 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch
+-rw-r--r--   1 root root       197 2009-04-16 19:18 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch.sig
+-rw-r--r--   1 root root      6982 2009-10-14 22:12 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch
+-rw-r--r--   1 root root       197 2009-10-14 22:12 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch.sig
+-rw-r--r--   1 root root      1065 2010-10-21 22:57 ./source/xap/xpdf/patches/xpdf-3.02pl5.patch
+-rw-r--r--   1 root root       197 2010-10-21 23:09 ./source/xap/xpdf/patches/xpdf-3.02pl5.patch.sig
+-rw-r--r--   1 root root        60 2011-03-29 18:23 ./source/xap/xpdf/patches/xpdf-3.02pl6.patch
+-rw-r--r--   1 root root       305 2011-03-29 18:28 ./source/xap/xpdf/patches/xpdf-3.02pl6.patch.sig
+-rw-r--r--   1 root root       498 2007-04-12 00:58 ./source/xap/xpdf/patches/xpdf-resizefix.diff.gz
+-rw-r--r--   1 root root     37396 2007-11-12 05:27 ./source/xap/xpdf/patches/xpdf_3.02-1.3.diff.gz
+-rw-r--r--   1 root root       636 2007-02-18 03:26 ./source/xap/xpdf/patches/xpdfrc.diff.gz
+-rw-r--r--   1 root root       643 2011-03-31 02:49 ./source/xap/xpdf/slack-desc
+-rw-r--r--   1 root root    674912 2007-02-27 22:56 ./source/xap/xpdf/xpdf-3.02.tar.gz
+-rw-r--r--   1 root root       189 2007-02-27 22:50 ./source/xap/xpdf/xpdf-3.02.tar.gz.sig
+-rwxr-xr-x   1 root root      5340 2012-08-01 16:31 ./source/xap/xpdf/xpdf.SlackBuild
+-rw-r--r--   1 root root      3260 2010-01-11 05:07 ./source/xap/xpdf/xpdf.desktop
+drwxr-xr-x   2 root root      4096 2011-02-28 03:41 ./source/xap/xsane
+-rw-r--r--   1 root root       955 2004-05-11 19:29 ./source/xap/xsane/slack-desc
+-rw-r--r--   1 root root   1874276 2010-11-16 22:05 ./source/xap/xsane/xsane-0.998.tar.xz
+-rwxr-xr-x   1 root root      3140 2012-07-04 17:13 ./source/xap/xsane/xsane.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-06-01 01:25 ./source/xap/xscreensaver
+-rw-r--r--   1 root root      2868 2008-10-17 04:30 ./source/xap/xscreensaver/setuid.c.gz
+-rw-r--r--   1 root root       887 2008-10-17 04:31 ./source/xap/xscreensaver/slack-desc
+-rw-r--r--   1 root root   3716768 2011-09-29 04:31 ./source/xap/xscreensaver/xscreensaver-5.15.tar.xz
+-rw-r--r--   1 root root     16569 2011-01-30 03:18 ./source/xap/xscreensaver/xscreensaver-getimage-file-5.14
+-rwxr-xr-x   1 root root      3967 2012-06-19 21:30 ./source/xap/xscreensaver/xscreensaver.SlackBuild
+-rw-r--r--   1 root root       285 2009-05-15 21:22 ./source/xap/xscreensaver/xscreensaver.electricsheep.diff.gz
+-rw-r--r--   1 root root      1763 2008-10-17 04:32 ./source/xap/xscreensaver/xscreensaver.setuid.diff.gz
+drwxr-xr-x   2 root root      4096 2010-02-19 19:32 ./source/xap/xv
+-rw-r--r--   1 root root       688 2002-03-10 06:26 ./source/xap/xv/slack-desc
+-rw-r--r--   1 root root   1693808 1994-12-22 15:50 ./source/xap/xv/xv-3.10.tar.xz
+-rw-r--r--   1 root root      3294 2008-12-16 18:04 ./source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff.bz2
+-rw-r--r--   1 root root     25974 2007-05-21 05:19 ./source/xap/xv/xv-3.10a-jumbo-README.txt
+-rw-r--r--   1 root root    114978 2010-02-19 19:24 ./source/xap/xv/xv-3.10a-jumbo-additions.diff.bz2
+-rw-r--r--   1 root root    287250 2007-05-21 04:57 ./source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2
+-rw-r--r--   1 root root     21943 1996-10-05 19:33 ./source/xap/xv/xv-3.10a.patch.gz
+-rwxr-xr-x   1 root root      3210 2010-02-19 19:32 ./source/xap/xv/xv.SlackBuild
+-rw-r--r--   1 root root       229 2010-02-19 19:27 ./source/xap/xv/xv.jasper.diff.gz
+-rw-r--r--   1 root root       317 2010-02-19 19:15 ./source/xap/xv/xv.prefix.diff.gz
+-rw-r--r--   1 root root       282 2010-02-19 19:16 ./source/xap/xv/xv.prefix_x86_64.diff.gz
+drwxr-xr-x   2 root root      4096 2011-04-03 10:43 ./source/xap/xxgdb
+-rw-r--r--   1 root root       874 2002-03-13 02:25 ./source/xap/xxgdb/slack-desc
+-rw-r--r--   1 root root       236 2011-04-03 09:58 ./source/xap/xxgdb/xxgdb-1.08-glibc.patch.xz
+-rw-r--r--   1 root root       212 2011-04-03 09:58 ./source/xap/xxgdb/xxgdb-1.12-debian-filemenu.patch.xz
+-rw-r--r--   1 root root       768 2011-04-03 09:58 ./source/xap/xxgdb/xxgdb-1.12-debian-pty.patch.xz
+-rw-r--r--   1 root root      7024 2011-04-03 09:58 ./source/xap/xxgdb/xxgdb-1.12-mandriva.patch.xz
+-rw-r--r--   1 root root       376 2011-04-03 09:58 ./source/xap/xxgdb/xxgdb-1.12-sysv.patch.xz
+-rw-r--r--   1 root root     88596 1995-11-19 16:40 ./source/xap/xxgdb/xxgdb-1.12.tar.xz
+-rwxr-xr-x   1 root root      3446 2011-04-05 00:44 ./source/xap/xxgdb/xxgdb.SlackBuild
+drwxr-xr-x  31 root root      4096 2012-08-09 03:55 ./source/xfce
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/Terminal
+-rw-r--r--   1 root root   1374136 2011-06-21 20:36 ./source/xfce/Terminal/Terminal-0.4.8.tar.xz
+-rwxr-xr-x   1 root root      3633 2012-07-18 21:24 ./source/xfce/Terminal/Terminal.SlackBuild
+-rw-r--r--   1 root root       821 2010-11-03 14:56 ./source/xfce/Terminal/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/Thunar
+-rw-r--r--   1 root root   1628764 2012-04-28 20:21 ./source/xfce/Thunar/Thunar-1.4.0.tar.xz
+-rwxr-xr-x   1 root root      4266 2012-07-19 18:10 ./source/xfce/Thunar/Thunar.SlackBuild
+-rw-r--r--   1 root root       920 2012-07-19 23:47 ./source/xfce/Thunar/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/exo
+-rw-r--r--   1 root root    947096 2012-04-28 20:04 ./source/xfce/exo/exo-0.8.0.tar.xz
+-rwxr-xr-x   1 root root      4263 2012-07-19 18:10 ./source/xfce/exo/exo.SlackBuild
+-rw-r--r--   1 root root       831 2012-07-19 21:15 ./source/xfce/exo/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/garcon
+-rw-r--r--   1 root root    379440 2012-04-28 20:08 ./source/xfce/garcon/garcon-0.2.0.tar.xz
+-rwxr-xr-x   1 root root      4266 2012-07-19 18:10 ./source/xfce/garcon/garcon.SlackBuild
+-rw-r--r--   1 root root       752 2012-07-19 21:19 ./source/xfce/garcon/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/gtk-xfce-engine
+-rw-r--r--   1 root root    280800 2012-04-28 10:28 ./source/xfce/gtk-xfce-engine/gtk-xfce-engine-3.0.0.tar.xz
+-rwxr-xr-x   1 root root      4275 2012-07-19 18:10 ./source/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild
+-rw-r--r--   1 root root       878 2012-07-19 23:47 ./source/xfce/gtk-xfce-engine/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/libxfce4ui
+-rw-r--r--   1 root root    448984 2012-04-28 19:49 ./source/xfce/libxfce4ui/libxfce4ui-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4444 2012-07-19 18:58 ./source/xfce/libxfce4ui/libxfce4ui.SlackBuild
+-rw-r--r--   1 root root       770 2012-07-19 23:47 ./source/xfce/libxfce4ui/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/libxfce4util
+-rw-r--r--   1 root root    375016 2012-04-28 19:39 ./source/xfce/libxfce4util/libxfce4util-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4272 2012-07-19 18:10 ./source/xfce/libxfce4util/libxfce4util.SlackBuild
+-rw-r--r--   1 root root       780 2012-07-19 21:26 ./source/xfce/libxfce4util/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/libxfcegui4
+-rw-r--r--   1 root root    584432 2012-04-28 20:13 ./source/xfce/libxfcegui4/libxfcegui4-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4271 2012-07-19 18:10 ./source/xfce/libxfcegui4/libxfcegui4.SlackBuild
+-rw-r--r--   1 root root       778 2012-07-19 21:29 ./source/xfce/libxfcegui4/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/orage
+-rw-r--r--   1 root root   2046524 2012-01-05 07:12 ./source/xfce/orage/orage-4.8.3.tar.xz
+-rwxr-xr-x   1 root root      3713 2012-07-18 21:27 ./source/xfce/orage/orage.SlackBuild
+-rw-r--r--   1 root root       628 2010-11-04 02:30 ./source/xfce/orage/slack-desc
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/thunar-volman
+-rw-r--r--   1 root root       803 2012-07-19 03:03 ./source/xfce/thunar-volman/slack-desc
+-rw-r--r--   1 root root    358800 2012-04-28 20:21 ./source/xfce/thunar-volman/thunar-volman-0.8.0.tar.xz
+-rwxr-xr-x   1 root root      3138 2012-07-19 03:01 ./source/xfce/thunar-volman/thunar-volman.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/tumbler
+-rw-r--r--   1 root root       968 2012-07-19 23:20 ./source/xfce/tumbler/slack-desc
+-rw-r--r--   1 root root    407444 2012-04-28 20:25 ./source/xfce/tumbler/tumbler-0.1.25.tar.xz
+-rwxr-xr-x   1 root root      4267 2012-08-02 21:05 ./source/xfce/tumbler/tumbler.SlackBuild
+-rwxr-xr-x   1 root root      2174 2012-07-20 17:52 ./source/xfce/xfce-build-all.sh
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfce4-appfinder
+-rw-r--r--   1 root root       935 2012-07-19 23:22 ./source/xfce/xfce4-appfinder/slack-desc
+-rw-r--r--   1 root root    380060 2012-04-28 20:29 ./source/xfce/xfce4-appfinder/xfce4-appfinder-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4275 2012-07-19 18:10 ./source/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-clipman-plugin
+-rw-r--r--   1 root root       172 2012-07-18 20:50 ./source/xfce/xfce4-clipman-plugin/doinst.sh.gz
+-rw-r--r--   1 root root      1003 2012-07-19 03:13 ./source/xfce/xfce4-clipman-plugin/slack-desc
+-rw-r--r--   1 root root    867560 2012-04-09 17:56 ./source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin-1.2.3.tar.xz
+-rwxr-xr-x   1 root root      3437 2012-07-19 03:29 ./source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
+-rw-r--r--   1 root root        64 2011-11-28 03:27 ./source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfce4-dev-tools
+-rw-r--r--   1 root root       823 2012-07-19 23:24 ./source/xfce/xfce4-dev-tools/slack-desc
+-rw-r--r--   1 root root    238252 2012-04-28 19:19 ./source/xfce/xfce4-dev-tools/xfce4-dev-tools-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4275 2012-07-19 18:10 ./source/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-mixer
+-rw-r--r--   1 root root       184 2010-11-04 03:20 ./source/xfce/xfce4-mixer/doinst.sh.gz
+-rw-r--r--   1 root root       899 2012-07-19 02:54 ./source/xfce/xfce4-mixer/slack-desc
+-rw-r--r--   1 root root    405224 2011-02-25 13:18 ./source/xfce/xfce4-mixer/xfce4-mixer-4.8.0.tar.xz
+-rwxr-xr-x   1 root root      3322 2012-07-18 21:28 ./source/xfce/xfce4-mixer/xfce4-mixer.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-notifyd
+-rw-r--r--   1 root root       174 2009-02-26 05:47 ./source/xfce/xfce4-notifyd/doinst.sh.gz
+-rw-r--r--   1 root root       905 2010-02-20 18:14 ./source/xfce/xfce4-notifyd/slack-desc
+-rw-r--r--   1 root root    302216 2011-08-06 09:02 ./source/xfce/xfce4-notifyd/xfce4-notifyd-0.2.2.tar.xz
+-rwxr-xr-x   1 root root      3689 2012-08-29 17:19 ./source/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfce4-panel
+-rw-r--r--   1 root root       899 2012-07-19 23:26 ./source/xfce/xfce4-panel/slack-desc
+-rw-r--r--   1 root root    899124 2012-04-28 20:33 ./source/xfce/xfce4-panel/xfce4-panel-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4271 2012-07-19 18:10 ./source/xfce/xfce4-panel/xfce4-panel.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-power-manager
+-rw-r--r--   1 root root       172 2009-05-30 01:47 ./source/xfce/xfce4-power-manager/doinst.sh.gz
+-rw-r--r--   1 root root       877 2012-07-19 03:03 ./source/xfce/xfce4-power-manager/slack-desc
+-rw-r--r--   1 root root    868356 2012-04-28 20:41 ./source/xfce/xfce4-power-manager/xfce4-power-manager-1.2.0.tar.xz
+-rwxr-xr-x   1 root root      3939 2012-07-19 03:04 ./source/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-screenshooter
+-rw-r--r--   1 root root       172 2011-10-26 15:38 ./source/xfce/xfce4-screenshooter/doinst.sh.gz
+-rw-r--r--   1 root root       835 2012-07-19 03:15 ./source/xfce/xfce4-screenshooter/slack-desc
+-rw-r--r--   1 root root    913992 2012-05-02 18:27 ./source/xfce/xfce4-screenshooter/xfce4-screenshooter-1.8.1.tar.xz
+-rwxr-xr-x   1 root root      4070 2012-07-19 03:21 ./source/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
+-rw-r--r--   1 root root        54 2011-11-28 03:13 ./source/xfce/xfce4-screenshooter/xfce4-screenshooter.url
+drwxr-xr-x   2 root root      4096 2012-07-24 22:10 ./source/xfce/xfce4-session
+-rw-r--r--   1 root root       915 2012-07-19 23:29 ./source/xfce/xfce4-session/slack-desc
+-rw-r--r--   1 root root   1122596 2012-04-28 20:46 ./source/xfce/xfce4-session/xfce4-session-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4381 2012-07-19 18:13 ./source/xfce/xfce4-session/xfce4-session.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfce4-settings
+-rw-r--r--   1 root root       843 2012-07-19 23:31 ./source/xfce/xfce4-settings/slack-desc
+-rw-r--r--   1 root root    685280 2012-04-28 20:50 ./source/xfce/xfce4-settings/xfce4-settings-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4483 2012-07-19 19:34 ./source/xfce/xfce4-settings/xfce4-settings.SlackBuild
+-rw-r--r--   1 root root       323 2012-07-19 18:16 ./source/xfce/xfce4-settings/xfce4-settings.theme.diff.gz
+-rw-r--r--   1 root root       543 2012-07-19 19:32 ./source/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff.gz
+drwxr-xr-x   2 root root      4096 2012-07-23 13:43 ./source/xfce/xfce4-systemload-plugin
+-rw-r--r--   1 root root       876 2011-10-26 15:38 ./source/xfce/xfce4-systemload-plugin/slack-desc
+-rw-r--r--   1 root root    259876 2012-06-30 09:22 ./source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin-1.1.1.tar.xz
+-rwxr-xr-x   1 root root      3292 2012-07-18 21:28 ./source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
+-rw-r--r--   1 root root        67 2011-11-28 03:14 ./source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-taskmanager
+-rw-r--r--   1 root root       121 2011-10-26 15:38 ./source/xfce/xfce4-taskmanager/doinst.sh.gz
+-rw-r--r--   1 root root       931 2011-10-26 15:38 ./source/xfce/xfce4-taskmanager/slack-desc
+-rw-r--r--   1 root root    286488 2010-06-14 15:00 ./source/xfce/xfce4-taskmanager/xfce4-taskmanager-1.0.0.tar.xz
+-rwxr-xr-x   1 root root      3269 2012-07-19 03:08 ./source/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
+-rw-r--r--   1 root root        51 2011-11-28 03:16 ./source/xfce/xfce4-taskmanager/xfce4-taskmanager.url
+drwxr-xr-x   2 root root      4096 2012-07-20 00:52 ./source/xfce/xfce4-volumed
+-rw-r--r--   1 root root      1034 2011-10-26 15:38 ./source/xfce/xfce4-volumed/slack-desc
+-rw-r--r--   1 root root     83828 2011-03-03 10:39 ./source/xfce/xfce4-volumed/xfce4-volumed-0.1.13.tar.xz
+-rwxr-xr-x   1 root root      3332 2012-07-18 21:29 ./source/xfce/xfce4-volumed/xfce4-volumed.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-08-06 19:10 ./source/xfce/xfce4-weather-plugin
+-rw-r--r--   1 root root       840 2012-07-19 03:25 ./source/xfce/xfce4-weather-plugin/slack-desc
+-rw-r--r--   1 root root    572404 2012-08-06 11:16 ./source/xfce/xfce4-weather-plugin/xfce4-weather-plugin-0.8.1.tar.xz
+-rwxr-xr-x   1 root root      3363 2012-07-23 13:39 ./source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
+-rw-r--r--   1 root root        64 2011-11-28 03:17 ./source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfconf
+-rw-r--r--   1 root root       750 2012-07-19 23:35 ./source/xfce/xfconf/slack-desc
+-rw-r--r--   1 root root    427944 2012-04-28 19:57 ./source/xfce/xfconf/xfconf-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4266 2012-07-19 18:10 ./source/xfce/xfconf/xfconf.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfdesktop
+-rw-r--r--   1 root root       884 2012-07-19 23:37 ./source/xfce/xfdesktop/slack-desc
+-rw-r--r--   1 root root    992092 2012-04-28 20:54 ./source/xfce/xfdesktop/xfdesktop-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4269 2012-07-19 18:10 ./source/xfce/xfdesktop/xfdesktop.SlackBuild
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfwm4
+drwxr-xr-x   2 root root      4096 2012-07-19 23:47 ./source/xfce/xfwm4-themes
+-rw-r--r--   1 root root       870 2012-07-19 23:46 ./source/xfce/xfwm4-themes/slack-desc
+-rw-r--r--   1 root root    437564 2012-04-28 22:04 ./source/xfce/xfwm4-themes/xfwm4-themes-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4272 2012-07-19 18:10 ./source/xfce/xfwm4-themes/xfwm4-themes.SlackBuild
+-rw-r--r--   1 root root       741 2012-07-19 23:42 ./source/xfce/xfwm4/slack-desc
+-rw-r--r--   1 root root    968412 2012-04-28 20:58 ./source/xfce/xfwm4/xfwm4-4.10.0.tar.xz
+-rwxr-xr-x   1 root root      4382 2012-07-24 22:12 ./source/xfce/xfwm4/xfwm4.SlackBuild
+-rw-r--r--   1 root root      1198 2012-07-24 22:11 ./source/xfce/xfwm4/xinitrc.xfce
+drwxr-xr-x   3 root root      4096 2010-05-12 04:10 ./source/y
+drwxr-xr-x   3 root root      4096 2012-03-02 16:04 ./source/y/bsd-games
+-rw-r--r--   1 root root       825 2001-08-30 23:25 ./source/y/bsd-games/bsd-games-2.13.lsm
+-rw-r--r--   1 root root   1861269 2001-08-30 23:25 ./source/y/bsd-games/bsd-games-2.13.tar.bz2
+-rw-r--r--   1 root root       164 1999-09-27 21:18 ./source/y/bsd-games/bsd-games-login-fortune.csh
+-rw-r--r--   1 root root       164 2010-05-11 19:26 ./source/y/bsd-games/bsd-games-login-fortune.sh
+-rwxr-xr-x   1 root root      6954 2012-03-02 16:02 ./source/y/bsd-games/bsd-games.SlackBuild
+-rw-r--r--   1 root root       563 2003-02-03 21:48 ./source/y/bsd-games/bsd-games.config.params.diff.gz
+-rw-r--r--   1 root root       283 2003-02-03 22:28 ./source/y/bsd-games/bsd-games.fortlen.diff.gz
+-rw-r--r--   1 root root       181 2002-03-10 05:27 ./source/y/bsd-games/bsd-games.fortunepath.diff.gz
+-rw-r--r--   1 root root      2333 2010-05-11 21:10 ./source/y/bsd-games/bsd-games.getline.diff.gz
+-rw-r--r--   1 root root       265 2006-09-07 02:18 ./source/y/bsd-games/bsd-games.ospeed.diff.gz
+-rw-r--r--   1 root root       386 2007-08-27 17:51 ./source/y/bsd-games/bsd-games.phantasia_install_fix.diff.gz
+-rw-r--r--   1 root root      1960 2006-09-09 00:47 ./source/y/bsd-games/bsd-games.pom.diff.gz
+-rw-r--r--   1 root root       353 2003-02-03 22:51 ./source/y/bsd-games/bsd-games.strfile.8.diff.gz
+-rw-r--r--   1 root root       405 2007-08-27 17:57 ./source/y/bsd-games/bsd-games.trek-gcc4.diff.gz
+drwxr-xr-x   2 root root      4096 2012-03-02 16:01 ./source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here
+-rw-r--r--   1 root root       294 2012-03-02 16:01 ./source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here/20120302.diff.gz
+-rw-r--r--   1 root root     15107 2002-03-10 05:09 ./source/y/bsd-games/fortunes-linuxcookie.tar.gz
+-rw-r--r--   1 root root    364407 2002-03-10 05:09 ./source/y/bsd-games/fortunes-o.tar.gz
+-rw-r--r--   1 root root    104848 1993-10-25 00:02 ./source/y/bsd-games/hangman-words.gz
+-rw-r--r--   1 root root      1056 2002-03-10 04:51 ./source/y/bsd-games/slack-desc
diff --git a/GPG-KEY b/GPG-KEY
index d6340f0c..a5d3d77a 100644
--- a/GPG-KEY
+++ b/GPG-KEY
@@ -1,11 +1,11 @@
 security@slackware.com public key
 
-Type  bits/keyID    Date       User ID
-pub  1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com>
-sub  1024g/4E523569 2003-02-26 [expires: 2012-12-21]
+pub   1024D/40102233 2003-02-26 [expires: 2038-01-19]
+uid                  Slackware Linux Project <security@slackware.com>
+sub   1024g/4E523569 2003-02-26 [expires: 2038-01-19]
 
 -----BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.1 (GNU/Linux)
+Version: GnuPG v1.4.12 (GNU/Linux)
 
 mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA
 MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr
@@ -16,16 +16,16 @@ JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h
 LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ
 gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW
 TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl
-IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F
-Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My
-boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV
+IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8E
+CwcDAgMVAgMDFgIBAh4BAheABQJQPlypBQlBo7MrAAoJEGpEY8BAECIzjOwAn3vp
+tb6K1v2wLI9eVlnCdx4m1btpAJ9sFt4KwJrEdiO5wFC4xe9G4eZl4rkBDQQ+XSBV
 EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO
 cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP
 sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt
 bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA
 J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2
-Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ
-akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV
-tb+Sth2l
-=H5uu
+Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAlA+XL8FCUGjs2IACgkQ
+akRjwEAQIjMsbQCgk59KFTbTlZfJ6FoZjjEmK3/xGR4AniYT+EdSdvEyRtZYkqWz
+p1ayvO1b
+=tibb
 -----END PGP PUBLIC KEY BLOCK-----
diff --git a/README.TXT b/README.TXT
index 00839c66..e9405841 100644
--- a/README.TXT
+++ b/README.TXT
@@ -1,18 +1,17 @@
 

-Welcome to Slackware 13.37!  (64-bit x86_64 edition)

+Welcome to Slackware 14.0!  (64-bit x86_64 edition)

 

-Slackware 13.37 is a complete distribution of the Linux operating system.

+Slackware 14.0 is a complete distribution of the Linux operating system.

 

-Here are some versions of major components of Slackware 13.37:

+Here are some versions of major components of Slackware 14.0:

 

-- Linux kernel           2.6.37.6

-                         2.6.38.4

-- C compiler             gcc-4.5.2

-- Binutils               2.21.51.0.6

-- GNU C Library          glibc-2.13

-- X Window System        X11R7.6 + updates

-- KDE                    4.5.5

-- Xfce                   4.6.2

+- Linux kernel           3.2.29

+- C compiler             gcc-4.7.1

+- Binutils               2.22.52.0.2

+- GNU C Library          glibc-2.15

+- X Window System        X11R7.7

+- KDE                    4.8.5

+- Xfce                   4.10.0

 

 For installation instructions, see the file 'Slackware-HOWTO'.

 

@@ -21,24 +20,20 @@ For important hints about this release, see the file 'CHANGES_AND_HINTS.TXT'.
 These are some of the important files and directories found on the Slackware

 FTP site:

 

-  ftp://ftp.slackware.com/pub/slackware/slackware64-13.37/

+  ftp://ftp.slackware.com/pub/slackware/slackware64-14.0/

 

-There is also a newer (and faster) primary FTP site for Slackware here:

-

-  ftp://slackware.osuosl.org/pub/slackware/slackware64-13.37/

-

-Thanks to cwo.com for continuing to help us with hosting for our web site

-and ftp.slackware.com, and to the OSU Open Source Lab for hosting our

-archives at slackware.osuosl.org.

+Thanks to cwo.com for continuing to help us with hosting for our web site,

+and to the OSU Open Source Lab for hosting our archives at ftp.slackware.com

+(aka ftp.osuosl.org).

 

 If you're reading this on a CD-ROM, these directories will probably be

 split across several discs.

 

 .

-|-- ANNOUNCE.13.37        Announcement for Slackware 13.37.

+|-- ANNOUNCE.14.0        Announcement for Slackware 14.0.

 |-- BOOTING.TXT          Tips for troubleshooting boot problems.

-|-- CHANGES_AND_HINTS.TXT  A summary of major changes from Slackware 13.1

-|                        to 13.37 and common pitfalls.

+|-- CHANGES_AND_HINTS.TXT  A summary of major changes from Slackware 13.37

+|                        to 14.0 and common pitfalls.

 |-- CHECKSUMS.md5        MD5 format file checksums.

 |-- COPYING              The GNU Public License, version 2.

 |-- COPYING3             The GNU Public License, version 3.

@@ -64,9 +59,12 @@ split across several discs.
 |

 |-- extra/               Extra packages for Slackware like:

 |   |                    aspell-word-lists, bash-completion, bittornado,

-|   |                    brltty, emacspeak, the Java(TM) JDK,

-|   |                    mplayerplug-in, partitionmanager (GUI partitioning

-|   |                    tool for KDE4), slacktrack, tightvnc, and wicd.

+|   |                    bittorrent, brltty, emacspeak, mplayerplug-in,

+|   |                    partitionmanager, recordmydesktop, tightvnc, wicd,

+|   |                    and xf86-video-fbdev.  Scripts are also included to

+|   |                    repackage some non-redistributable binaries into

+|   |                    Slackware packages:  google-chrome, java, and

+|   |                    flashplayer-plugin.

 |   |

 |   `-- source/          Source code for the extra packages.

 |

@@ -80,25 +78,16 @@ split across several discs.
 |   |

 |   `-- initrd.img       Installation initrd (can also be loaded with Loadlin)

 |

-|-- kernels/             Precompiled Linux 2.6.37.6 kernel images.

+|-- kernels/             Precompiled Linux 3.2.29 kernel images.

 |   |

 |   `-- huge.s           The default standard install kernel for Slackware.

 |                        This supports pretty much everything in the

-|                        2.6.37.6 kernel, including Speakup.  This kernel

+|                        3.2.29 kernel, including Speakup.  This kernel

 |                        requires an x86_64 (also known as AMD64, EM64T, or

 |                        Intel 64) capable 64-bit CPU.

 |    

-|-- pasture/             These are packages that have been removed

-|   |                    from Slackware, but are useful enough to

-|   |                    keep around.  Might not be secure.

-|   |

-|   |                    Packages currently found here include

-|   |                    gxine-0.5.905, mesa-7.8.2, and xf86-video-ati-6.13.2.

-|   |

-|   `-- source/          Source code directory for the pasture packages.

-|

-|-- slackware/           This directory contains the core software packages

-|   |                    for Slackware 13.37.

+|-- slackware64/         This directory contains the core software packages

+|   |                    for Slackware 14.0.

 |   |

 |   |-- a/               The A (base) package series.

 |   |-- ap/              The AP (applications) package series.

@@ -114,6 +103,7 @@ split across several discs.
 |   |-- tcl/             The TCL (Tcl/Tk and related) package series.

 |   |-- x/               The X (X Window System) package series.

 |   |-- xap/             The XAP (X applications) package series.

+|   |-- xfce/            The XFCE (Xfce desktop) package series.

 |   `-- y/               The Y (BSD games) package series.

 |

 |-- source/              This directory contains source code for the core

@@ -134,13 +124,23 @@ split across several discs.
 |   |-- tcl/             Source for the TCL (Tcl/Tk and related) series.

 |   |-- x/               Source for the X (X Window System) series.

 |   |-- xap/             Source for the XAP (X applications) series.

+|   |-- xfce/            Source for the XFCE (Xfce desktop) series.

 |   `-- y/               Source for the Y (BSD games) series.

 |

 |-- testing/             This directory contains packages being tested

 |   |                    for possible use in future versions of Slackware.

-|   |                    You'll find mesa-7.10.1, which might be a better

-|   |                    option for some hardware.  This package should

-|   |                    not be considered supported.

+|   |                    Here you'll find rp-pppoe-3.11, a user-space PPPoE

+|   |                    client, which came in just a bit too late to be

+|   |                    tested for inclusion in the main tree.

+|   |                    Also included are config files for more recent

+|   |                    branches of the Linux kernel.

+|   |                    Finally, there are newer versions of libdrm and

+|   |                    the X video drivers nouveau, ati, and intel.

+|   |                    These alternate drivers require the libdrm

+|   |                    update, so be sure to install that if you try

+|   |                    them.  These weren't included in the main tree

+|   |                    because Mesa is not yet compile-ready for this

+|   |                    version of libdrm.

 |   |

 |   `--- source/         This directory contains source code for the 

 |                        packages in testing.

@@ -160,12 +160,11 @@ split across several discs.
 

 

 If you like Slackware, please consider supporting the project by becoming

-a Slackware subscriber.  The announcement (ANNOUNCE_13.37) in this directory

+a Slackware subscriber.  The announcement (ANNOUNCE_14.0) in this directory

 has information about ordering or subscribing to the Slackware CD-ROM or

-DVD releases.  Note that at this time the x86_64 release is only available

-as part of the DVD -- if there's interest in a CD-ROM version, let us know.

-You can find out about ordering Slackware on media, or read more about it

-(and check out other Slackware-related items for sale) by visiting the

+DVD releases.  Note that the x86_64 release is only available as part of the

+DVD.  You can find out about ordering Slackware on media, or read more about

+it (and check out other Slackware-related items for sale) by visiting the

 Slackware store.  We also gratefully accept financial contributions under

 the "All" section of the store site menu.

 

diff --git a/README.initrd b/README.initrd
index ca95c332..698f4226 100644
--- a/README.initrd
+++ b/README.initrd
@@ -1,10 +1,10 @@
 
 Slackware initrd mini HOWTO
 by Patrick Volkerding, volkerdi@slackware.com
-Thu Apr  7 06:02:26 CDT 2011
+Mon Sep 17 13:39:27 CDT 2012
 
 This document describes how to create and install an initrd, which may be 
-required to use the 2.6 kernel.  Also see "man mkinitrd".
+required to use the 3.2 kernel.  Also see "man mkinitrd".
 
 1.  What is an initrd?
 2.  Why to I need an initrd?
@@ -33,15 +33,15 @@ flexible to ship a generic kernel and a set of kernel modules for it.
 
 The easiest way to make the initrd is to use the mkinitrd script included 
 in Slackware's mkinitrd package.  We'll walk through the process of 
-upgrading to the generic 2.6.37.6 Linux kernel using the packages
+upgrading to the generic 3.2.29 Linux kernel using the packages
 found in Slackware's slackware/a/ directory.
 
 First, make sure the kernel, kernel modules, and mkinitrd package are 
 installed (the current version numbers might be a little different, so 
 this is just an example):
 
-  installpkg kernel-generic-2.6.37.6-i686-1.tgz
-  installpkg kernel-modules-2.6.37.6-i686-1.tgz
+  installpkg kernel-generic-3.2.29-i686-1.tgz
+  installpkg kernel-modules-3.2.29-i686-1.tgz
   installpkg mkinitrd-1.1.0-i486-1.tgz
 
 Change into the /boot directory:
@@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd".  I'm using reiserfs for my root
 filesystem, and since it's an IDE system the reiserfs module will be
 the only one I need to load:
 
-  mkinitrd -c -k 2.6.37.6 -m reiserfs
+  mkinitrd -c -k 3.2.29 -m reiserfs
 
 This should do two things.  First, it will create a directory
 /boot/initrd-tree containing the initrd's filesystem.  Then it will
@@ -61,10 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and
 then run mkinitrd again without options to rebuild the image.  That's
 optional, though, and only advanced users will need to think about that.
 
-Here's another example:  Build an initrd image using Linux 2.6.37.6
+Here's another example:  Build an initrd image using Linux 3.2.29
 kernel modules for a system with an ext3 root partition on /dev/sdb3:
 
-  mkinitrd -c -k 2.6.37.6 -m ext3 -f ext3 -r /dev/sdb3
+  mkinitrd -c -k 3.2.29 -m ext3 -f ext3 -r /dev/sdb3
 
 
 4.  Now that I've built an initrd, how do I use it?
@@ -76,10 +76,10 @@ initrd.  Here's an example section of lilo.conf showing how this is
 done:
 
 # Linux bootable partition config begins
-image = /boot/vmlinuz-generic-2.6.37.6
+image = /boot/vmlinuz-generic-3.2.29
   initrd = /boot/initrd.gz
   root = /dev/sda6
-  label = Lnx26376
+  label = Lnx3229
   read-only
 # Linux bootable partition config ends
 
diff --git a/README_CRYPT.TXT b/README_CRYPT.TXT
index d2b98029..0ea11b89 100644
--- a/README_CRYPT.TXT
+++ b/README_CRYPT.TXT
@@ -307,10 +307,10 @@ needed to unlock the root filesystem, so that the kernel can start the init
 program.  In the example command line below which creates the 'initrd.gz'

 image I assume that the root filesystem is 'ext3', we used the mapped device

 'cryptroot' for the root filesystem on the real partition '/dev/sdx1',

-and are running the Slackware 13.37 default SMP kernel '2.6.37.6-smp'

+and are running the Slackware 14.0 default SMP kernel '3.2.29-smp'

 and we did not use Logical Volumes (more about that in the next section):

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1

 

 * The resulting initrd image will be written to the file '/boot/initrd.gz'

 by default.  We still need to tell lilo about this initrd. Open the

@@ -318,7 +318,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico -
 it should already have been generated by the 'liloconfig' part of setup.

 Look for the "Linux bootable partition config" and add a line for the initrd.

 We also need to change the kernel file to a generic kernel, because lilo

-is unable to combine the 'huge' kernels in Slackware 13.37 with an initrd

+is unable to combine the 'huge' kernels in Slackware 14.0 with an initrd

 image - it will complain about "The initial RAM disk is too big to fit

 between the kernel and the 15M-16M memory hole" if you try with a 'huge'

 kernel.  We can live with that, since the 'huge' kernels are not meant

@@ -326,7 +326,7 @@ for day-to-day use anyway.  They are meant to install Slackware on a wide
 range of computers and that is why they are 'huge'.  The linux part of

 '/etc/lilo.conf' should end up looking somewhat like this:

 

-image = /boot/vmlinuz-generic-smp-2.6.37.6-smp

+image = /boot/vmlinuz-generic-smp-3.2.29-smp

   initrd = /boot/initrd.gz

   root = /dev/mapper/cryptroot

   label = linux

@@ -367,7 +367,7 @@ One, you will need to enter a passphrase for every partition you have encrypted
 (except for the swap which Slackware encrypts with a random passphrase

 on every boot).  Two, the method used for encrypting the swap partition

 prohibits the use of the swap as a hibernation partition.  And since the

-initrd of Slackware 13.37 supports hibernation, it would be a shame not to be

+initrd of Slackware 14.0 supports hibernation, it would be a shame not to be

 able to use this feature on your laptop (which, because of it's portability,

 is the primary target for full disk encryption anyway).

 

@@ -490,10 +490,10 @@ stage of booting the kernel.  The initial ramdisk (initrd) contains a small
 filesystem with the tools needed to unlock the root filesystem, so that

 the kernel can start the init program.  In the example command line below

 which creates the 'initrd.gz' image I assume that you formatted the root

-filesystem as 'ext3', and will be running the Slackware 13.37 default SMP

-kernel '2.6.37.6-smp' :

+filesystem as 'ext3', and will be running the Slackware 14.0 default SMP

+kernel '3.2.29-smp' :

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

 

 NOTE: if you use a non-US keyboard and need to enter a passphrase during boot,

       this may be problematic if the keyboard mapping is US while Slackware

@@ -509,7 +509,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico -
 it should already have been generated by the 'liloconfig' part of setup.

 Look for the "Linux bootable partition config" and add a line for the initrd.

 We also need to change the kernel file to a generic kernel, because lilo

-is unable to combine the 'huge' kernels in Slackware 13.37 with an initrd

+is unable to combine the 'huge' kernels in Slackware 14.0 with an initrd

 image - it will complain about "The initial RAM disk is too big to fit

 between the kernel and the 15M-16M memory hole" if you try a 'huge'

 kernel.  We can live with that, since the 'huge' kernels are not meant

@@ -517,7 +517,7 @@ for day-to-day use anyway.  They are meant to install Slackware on a wide
 range of computers and that is why they are 'huge'.  The linux part of

 '/etc/lilo.conf' should end up looking somewhat like this:

 

-image = /boot/vmlinuz-generic-smp-2.6.37.6-smp

+image = /boot/vmlinuz-generic-smp-3.2.29-smp

   initrd = /boot/initrd.gz

   root = /dev/cryptvg/root

   label = linux

@@ -562,7 +562,7 @@ system, it will be used and you won't have to type a passphrase.
 requires you to use the "-K" parameter to mkinitrd to specify the USB stick's

 FAT-label or UUID, as well as the full path to the keyfile.  An example:

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L -K LABEL=TRAVELSTICK:/keys/alien.luks

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L -K LABEL=TRAVELSTICK:/keys/alien.luks

 

     The mkinitrd of Slackware 13.1 introduced this support for USB sticks as

 unlocking mechanism.  Alternatively, after the root filesystem is unlocked

@@ -621,7 +621,7 @@ support for this keyboard to your initrd.
 A mkinitrd helper script

 ------------------------

 

-    The mkinitrd package in Slackware 13.37 ships with a script called

+    The mkinitrd package in Slackware 14.0 ships with a script called

 'mkinitrd_command_generator.sh'.  If you run this script, it will analyze

 your Slackware configuration and make a smart suggestion about the 'mkinitrd'

 command you have to type in order to create an initrd.gz with all the bells

@@ -636,7 +636,7 @@ by yourself:
 It should emit a string like this (your system will probably give different

 parameter values):

 

-mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

+mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

 

 You can copy and paste this output to your command prompt, and add any other

 parameters you need such as "-h" to indicate a hibernation partition or

@@ -651,7 +651,7 @@ Good luck with your fresh Slackware installion on encrypted partition(s)!
 

 ==============================================================================

 Author:

-  Eric Hameleers <alien@slackware.com> 08-apr-2011

+  Eric Hameleers <alien@slackware.com> 18-sep-2012

 URLs:

   http://www.slackware.com/~alien/dokuwiki/doku.php?id=slackware:setup

 

diff --git a/README_LVM.TXT b/README_LVM.TXT
index 2318e696..a69c0ea1 100644
--- a/README_LVM.TXT
+++ b/README_LVM.TXT
@@ -11,7 +11,7 @@ installation to Logical Volumes.  In Slackware, the installer has never
 supported this, but the gurus usually would find a way to create logical

 volumes and install or migrate their Slackware onto those.  Having your

 Slackware installed fully on LVM was near impossible until Slackware 12.0.

-Slackware 13.37 has improved support for LVM built into the installer.

+Slackware 14.0 has improved support for LVM built into the installer.

 

 

 Preparing Logical Volumes (LV)

@@ -105,9 +105,9 @@ We are going to 'chroot' into our fresh installation:
     Next, while we are in the chroot, create the initrd with LVM support -

 in the example command line I assume that the root filesystem is 'ext3',

 we used the LV '/dev/myvg/root' as the root device, and are running the

-Slackware 13.37 default SMP kernel '2.6.37.6-smp':

+Slackware 14.0 default SMP kernel '3.2.29-smp':

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/myvg/root -L

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/myvg/root -L

 

     The resulting initrd image will be written to the file '/boot/initrd.gz'

 by default.  We still need to tell lilo about this initrd, so open the

@@ -119,7 +119,7 @@ filename added by 'liloconfig' is '/boot/vmlinuz' which is a symbolic link to
 the huge SMP kernel.  Remember that we need a 'generic' kernel with the initrd.

 The end result should look somewhat like this:

 

-  image = /boot/vmlinuz-generic-smp-2.6.37.6-smp

+  image = /boot/vmlinuz-generic-smp-3.2.29-smp

     initrd = /boot/initrd.gz

     root = /dev/myvg/root

     label = linux

@@ -183,7 +183,7 @@ This is enough to get it recognized by the setup program.  Have fun!
 

 ========================================================

 Author:

-  Eric Hameleers <alien@slackware.com> 08-apr-2011

+  Eric Hameleers <alien@slackware.com> 18-sep-2012

 Wiki URLs:

   http://www.slackware.com/~alien/dokuwiki/doku.php?id=slackware:setup

 Documentation:

diff --git a/READ_DVD.TXT b/READ_DVD.TXT
index 74808224..965e91bf 100644
--- a/READ_DVD.TXT
+++ b/READ_DVD.TXT
@@ -1,9459 +1,6532 @@
 

-Welcome to the Slackware Linux version 13.37 64-bit x86_64 DVD.

+Welcome to the Slackware Linux version 14.0 source code DVD.

 

 Here's a tree showing the contents of this disc.  For complete details,

 see additional documentation files.

 

 .

-|-- ANNOUNCE.13_37

-|-- BOOTING.TXT

-|-- CHANGES_AND_HINTS.TXT

 |-- CHECKSUMS.md5

 |-- CHECKSUMS.md5.asc

-|-- COPYING

-|-- COPYING3

-|-- COPYRIGHT.TXT

-|-- CRYPTO_NOTICE.TXT

-|-- ChangeLog.txt

 |-- FILELIST.TXT

-|-- GPG-KEY

-|-- PACKAGES.TXT

-|-- README.TXT

-|-- README.initrd

-|-- README_CRYPT.TXT

-|-- README_LVM.TXT

-|-- README_RAID.TXT

 |-- READ_DVD.TXT

-|-- RELEASE_NOTES

-|-- SPEAKUP_DOCS.TXT

-|-- SPEAK_INSTALL.TXT

-|-- Slackware-HOWTO

-|-- UPGRADE.TXT

-|-- extra

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   |-- PACKAGES.TXT

-|   |-- README.TXT

-|   |-- aspell-word-lists

-|   |   |-- aspell-af-0.50_0-noarch-4.txt

-|   |   |-- aspell-af-0.50_0-noarch-4.txz

-|   |   |-- aspell-af-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-am-0.03_1-noarch-4.txt

-|   |   |-- aspell-am-0.03_1-noarch-4.txz

-|   |   |-- aspell-am-0.03_1-noarch-4.txz.asc

-|   |   |-- aspell-az-0.02_0-noarch-4.txt

-|   |   |-- aspell-az-0.02_0-noarch-4.txz

-|   |   |-- aspell-az-0.02_0-noarch-4.txz.asc

-|   |   |-- aspell-be-0.01-noarch-4.txt

-|   |   |-- aspell-be-0.01-noarch-4.txz

-|   |   |-- aspell-be-0.01-noarch-4.txz.asc

-|   |   |-- aspell-bg-4.0_0-noarch-4.txt

-|   |   |-- aspell-bg-4.0_0-noarch-4.txz

-|   |   |-- aspell-bg-4.0_0-noarch-4.txz.asc

-|   |   |-- aspell-bn-0.01.1_1-noarch-4.txt

-|   |   |-- aspell-bn-0.01.1_1-noarch-4.txz

-|   |   |-- aspell-bn-0.01.1_1-noarch-4.txz.asc

-|   |   |-- aspell-br-0.50_2-noarch-4.txt

-|   |   |-- aspell-br-0.50_2-noarch-4.txz

-|   |   |-- aspell-br-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-ca-20040130_1-noarch-4.txt

-|   |   |-- aspell-ca-20040130_1-noarch-4.txz

-|   |   |-- aspell-ca-20040130_1-noarch-4.txz.asc

-|   |   |-- aspell-cs-20040614_1-noarch-4.txt

-|   |   |-- aspell-cs-20040614_1-noarch-4.txz

-|   |   |-- aspell-cs-20040614_1-noarch-4.txz.asc

-|   |   |-- aspell-csb-0.02_0-noarch-4.txt

-|   |   |-- aspell-csb-0.02_0-noarch-4.txz

-|   |   |-- aspell-csb-0.02_0-noarch-4.txz.asc

-|   |   |-- aspell-cy-0.50_3-noarch-4.txt

-|   |   |-- aspell-cy-0.50_3-noarch-4.txz

-|   |   |-- aspell-cy-0.50_3-noarch-4.txz.asc

-|   |   |-- aspell-da-1.4.42_1-noarch-4.txt

-|   |   |-- aspell-da-1.4.42_1-noarch-4.txz

-|   |   |-- aspell-da-1.4.42_1-noarch-4.txz.asc

-|   |   |-- aspell-de-20030222_1-noarch-4.txt

-|   |   |-- aspell-de-20030222_1-noarch-4.txz

-|   |   |-- aspell-de-20030222_1-noarch-4.txz.asc

-|   |   |-- aspell-el-0.50_3-noarch-4.txt

-|   |   |-- aspell-el-0.50_3-noarch-4.txz

-|   |   |-- aspell-el-0.50_3-noarch-4.txz.asc

-|   |   |-- aspell-eo-0.50_2-noarch-4.txt

-|   |   |-- aspell-eo-0.50_2-noarch-4.txz

-|   |   |-- aspell-eo-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-es-0.50_2-noarch-4.txt

-|   |   |-- aspell-es-0.50_2-noarch-4.txz

-|   |   |-- aspell-es-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-et-0.1.21_1-noarch-4.txt

-|   |   |-- aspell-et-0.1.21_1-noarch-4.txz

-|   |   |-- aspell-et-0.1.21_1-noarch-4.txz.asc

-|   |   |-- aspell-fa-0.02_0-noarch-4.txt

-|   |   |-- aspell-fa-0.02_0-noarch-4.txz

-|   |   |-- aspell-fa-0.02_0-noarch-4.txz.asc

-|   |   |-- aspell-fi-0.7_0-noarch-4.txt

-|   |   |-- aspell-fi-0.7_0-noarch-4.txz

-|   |   |-- aspell-fi-0.7_0-noarch-4.txz.asc

-|   |   |-- aspell-fo-0.2.16_1-noarch-4.txt

-|   |   |-- aspell-fo-0.2.16_1-noarch-4.txz

-|   |   |-- aspell-fo-0.2.16_1-noarch-4.txz.asc

-|   |   |-- aspell-fr-0.50_3-noarch-4.txt

-|   |   |-- aspell-fr-0.50_3-noarch-4.txz

-|   |   |-- aspell-fr-0.50_3-noarch-4.txz.asc

-|   |   |-- aspell-ga-3.6_0-noarch-4.txt

-|   |   |-- aspell-ga-3.6_0-noarch-4.txz

-|   |   |-- aspell-ga-3.6_0-noarch-4.txz.asc

-|   |   |-- aspell-gd-0.1.1_1-noarch-4.txt

-|   |   |-- aspell-gd-0.1.1_1-noarch-4.txz

-|   |   |-- aspell-gd-0.1.1_1-noarch-4.txz.asc

-|   |   |-- aspell-gl-0.50_0-noarch-4.txt

-|   |   |-- aspell-gl-0.50_0-noarch-4.txz

-|   |   |-- aspell-gl-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-gu-0.02_0-noarch-4.txt

-|   |   |-- aspell-gu-0.02_0-noarch-4.txz

-|   |   |-- aspell-gu-0.02_0-noarch-4.txz.asc

-|   |   |-- aspell-gv-0.50_0-noarch-4.txt

-|   |   |-- aspell-gv-0.50_0-noarch-4.txz

-|   |   |-- aspell-gv-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-he-1.0_0-noarch-4.txt

-|   |   |-- aspell-he-1.0_0-noarch-4.txz

-|   |   |-- aspell-he-1.0_0-noarch-4.txz.asc

-|   |   |-- aspell-hi-0.01_0-noarch-4.txt

-|   |   |-- aspell-hi-0.01_0-noarch-4.txz

-|   |   |-- aspell-hi-0.01_0-noarch-4.txz.asc

-|   |   |-- aspell-hil-0.11_0-noarch-4.txt

-|   |   |-- aspell-hil-0.11_0-noarch-4.txz

-|   |   |-- aspell-hil-0.11_0-noarch-4.txz.asc

-|   |   |-- aspell-hr-0.51_0-noarch-4.txt

-|   |   |-- aspell-hr-0.51_0-noarch-4.txz

-|   |   |-- aspell-hr-0.51_0-noarch-4.txz.asc

-|   |   |-- aspell-hsb-0.01_1-noarch-4.txt

-|   |   |-- aspell-hsb-0.01_1-noarch-4.txz

-|   |   |-- aspell-hsb-0.01_1-noarch-4.txz.asc

-|   |   |-- aspell-hu-0.99.4.2_0-noarch-4.txt

-|   |   |-- aspell-hu-0.99.4.2_0-noarch-4.txz

-|   |   |-- aspell-hu-0.99.4.2_0-noarch-4.txz.asc

-|   |   |-- aspell-ia-0.50_1-noarch-4.txt

-|   |   |-- aspell-ia-0.50_1-noarch-4.txz

-|   |   |-- aspell-ia-0.50_1-noarch-4.txz.asc

-|   |   |-- aspell-id-1.2_0-noarch-4.txt

-|   |   |-- aspell-id-1.2_0-noarch-4.txz

-|   |   |-- aspell-id-1.2_0-noarch-4.txz.asc

-|   |   |-- aspell-is-0.51.1_0-noarch-4.txt

-|   |   |-- aspell-is-0.51.1_0-noarch-4.txz

-|   |   |-- aspell-is-0.51.1_0-noarch-4.txz.asc

-|   |   |-- aspell-it-2.2_20050523_0-noarch-4.txt

-|   |   |-- aspell-it-2.2_20050523_0-noarch-4.txz

-|   |   |-- aspell-it-2.2_20050523_0-noarch-4.txz.asc

-|   |   |-- aspell-ku-0.12_0-noarch-4.txt

-|   |   |-- aspell-ku-0.12_0-noarch-4.txz

-|   |   |-- aspell-ku-0.12_0-noarch-4.txz.asc

-|   |   |-- aspell-la-20020503_0-noarch-4.txt

-|   |   |-- aspell-la-20020503_0-noarch-4.txz

-|   |   |-- aspell-la-20020503_0-noarch-4.txz.asc

-|   |   |-- aspell-lt-1.1+cvs20060103_0-noarch-4.txt

-|   |   |-- aspell-lt-1.1+cvs20060103_0-noarch-4.txz

-|   |   |-- aspell-lt-1.1+cvs20060103_0-noarch-4.txz.asc

-|   |   |-- aspell-lv-0.5.5_1-noarch-4.txt

-|   |   |-- aspell-lv-0.5.5_1-noarch-4.txz

-|   |   |-- aspell-lv-0.5.5_1-noarch-4.txz.asc

-|   |   |-- aspell-mg-0.03_0-noarch-4.txt

-|   |   |-- aspell-mg-0.03_0-noarch-4.txz

-|   |   |-- aspell-mg-0.03_0-noarch-4.txz.asc

-|   |   |-- aspell-mi-0.50_0-noarch-4.txt

-|   |   |-- aspell-mi-0.50_0-noarch-4.txz

-|   |   |-- aspell-mi-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-mk-0.50_0-noarch-4.txt

-|   |   |-- aspell-mk-0.50_0-noarch-4.txz

-|   |   |-- aspell-mk-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-mn-0.01_0-noarch-4.txt

-|   |   |-- aspell-mn-0.01_0-noarch-4.txz

-|   |   |-- aspell-mn-0.01_0-noarch-4.txz.asc

-|   |   |-- aspell-mr-0.10_0-noarch-4.txt

-|   |   |-- aspell-mr-0.10_0-noarch-4.txz

-|   |   |-- aspell-mr-0.10_0-noarch-4.txz.asc

-|   |   |-- aspell-ms-0.50_0-noarch-4.txt

-|   |   |-- aspell-ms-0.50_0-noarch-4.txz

-|   |   |-- aspell-ms-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-mt-0.50_0-noarch-4.txt

-|   |   |-- aspell-mt-0.50_0-noarch-4.txz

-|   |   |-- aspell-mt-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-nb-0.50.1_0-noarch-4.txt

-|   |   |-- aspell-nb-0.50.1_0-noarch-4.txz

-|   |   |-- aspell-nb-0.50.1_0-noarch-4.txz.asc

-|   |   |-- aspell-nds-0.01_0-noarch-4.txt

-|   |   |-- aspell-nds-0.01_0-noarch-4.txz

-|   |   |-- aspell-nds-0.01_0-noarch-4.txz.asc

-|   |   |-- aspell-nl-0.50_2-noarch-4.txt

-|   |   |-- aspell-nl-0.50_2-noarch-4.txz

-|   |   |-- aspell-nl-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-nn-0.50.1_1-noarch-4.txt

-|   |   |-- aspell-nn-0.50.1_1-noarch-4.txz

-|   |   |-- aspell-nn-0.50.1_1-noarch-4.txz.asc

-|   |   |-- aspell-no-0.50_2-noarch-4.txt

-|   |   |-- aspell-no-0.50_2-noarch-4.txz

-|   |   |-- aspell-no-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-ny-0.01_0-noarch-4.txt

-|   |   |-- aspell-ny-0.01_0-noarch-4.txz

-|   |   |-- aspell-ny-0.01_0-noarch-4.txz.asc

-|   |   |-- aspell-or-0.03_1-noarch-4.txt

-|   |   |-- aspell-or-0.03_1-noarch-4.txz

-|   |   |-- aspell-or-0.03_1-noarch-4.txz.asc

-|   |   |-- aspell-pa-0.01_1-noarch-4.txt

-|   |   |-- aspell-pa-0.01_1-noarch-4.txz

-|   |   |-- aspell-pa-0.01_1-noarch-4.txz.asc

-|   |   |-- aspell-pl-0.51_0-noarch-4.txt

-|   |   |-- aspell-pl-0.51_0-noarch-4.txz

-|   |   |-- aspell-pl-0.51_0-noarch-4.txz.asc

-|   |   |-- aspell-pt-0.50_2-noarch-4.txt

-|   |   |-- aspell-pt-0.50_2-noarch-4.txz

-|   |   |-- aspell-pt-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-pt_BR-20080707_0-noarch-4.txt

-|   |   |-- aspell-pt_BR-20080707_0-noarch-4.txz

-|   |   |-- aspell-pt_BR-20080707_0-noarch-4.txz.asc

-|   |   |-- aspell-qu-0.02_0-noarch-4.txt

-|   |   |-- aspell-qu-0.02_0-noarch-4.txz

-|   |   |-- aspell-qu-0.02_0-noarch-4.txz.asc

-|   |   |-- aspell-ro-0.50_2-noarch-4.txt

-|   |   |-- aspell-ro-0.50_2-noarch-4.txz

-|   |   |-- aspell-ro-0.50_2-noarch-4.txz.asc

-|   |   |-- aspell-ru-0.99f7_1-noarch-4.txt

-|   |   |-- aspell-ru-0.99f7_1-noarch-4.txz

-|   |   |-- aspell-ru-0.99f7_1-noarch-4.txz.asc

-|   |   |-- aspell-rw-0.50_0-noarch-4.txt

-|   |   |-- aspell-rw-0.50_0-noarch-4.txz

-|   |   |-- aspell-rw-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-sc-1.0-noarch-4.txt

-|   |   |-- aspell-sc-1.0-noarch-4.txz

-|   |   |-- aspell-sc-1.0-noarch-4.txz.asc

-|   |   |-- aspell-sk-0.52_0-noarch-4.txt

-|   |   |-- aspell-sk-0.52_0-noarch-4.txz

-|   |   |-- aspell-sk-0.52_0-noarch-4.txz.asc

-|   |   |-- aspell-sl-0.50_0-noarch-4.txt

-|   |   |-- aspell-sl-0.50_0-noarch-4.txz

-|   |   |-- aspell-sl-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-sr-0.02-noarch-4.txt

-|   |   |-- aspell-sr-0.02-noarch-4.txz

-|   |   |-- aspell-sr-0.02-noarch-4.txz.asc

-|   |   |-- aspell-sv-0.51_0-noarch-4.txt

-|   |   |-- aspell-sv-0.51_0-noarch-4.txz

-|   |   |-- aspell-sv-0.51_0-noarch-4.txz.asc

-|   |   |-- aspell-sw-0.50_0-noarch-4.txt

-|   |   |-- aspell-sw-0.50_0-noarch-4.txz

-|   |   |-- aspell-sw-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-ta-20040424_1-noarch-4.txt

-|   |   |-- aspell-ta-20040424_1-noarch-4.txz

-|   |   |-- aspell-ta-20040424_1-noarch-4.txz.asc

-|   |   |-- aspell-te-0.01_2-noarch-4.txt

-|   |   |-- aspell-te-0.01_2-noarch-4.txz

-|   |   |-- aspell-te-0.01_2-noarch-4.txz.asc

-|   |   |-- aspell-tet-0.1.1-noarch-4.txt

-|   |   |-- aspell-tet-0.1.1-noarch-4.txz

-|   |   |-- aspell-tet-0.1.1-noarch-4.txz.asc

-|   |   |-- aspell-tl-0.02_1-noarch-4.txt

-|   |   |-- aspell-tl-0.02_1-noarch-4.txz

-|   |   |-- aspell-tl-0.02_1-noarch-4.txz.asc

-|   |   |-- aspell-tn-1.0.1_0-noarch-4.txt

-|   |   |-- aspell-tn-1.0.1_0-noarch-4.txz

-|   |   |-- aspell-tn-1.0.1_0-noarch-4.txz.asc

-|   |   |-- aspell-tr-0.50_0-noarch-4.txt

-|   |   |-- aspell-tr-0.50_0-noarch-4.txz

-|   |   |-- aspell-tr-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-uk-0.51_0-noarch-4.txt

-|   |   |-- aspell-uk-0.51_0-noarch-4.txz

-|   |   |-- aspell-uk-0.51_0-noarch-4.txz.asc

-|   |   |-- aspell-uk-1.1_0-noarch-4.txt

-|   |   |-- aspell-uk-1.1_0-noarch-4.txz

-|   |   |-- aspell-uk-1.1_0-noarch-4.txz.asc

-|   |   |-- aspell-uz-0.5_0-noarch-4.txt

-|   |   |-- aspell-uz-0.5_0-noarch-4.txz

-|   |   |-- aspell-uz-0.5_0-noarch-4.txz.asc

-|   |   |-- aspell-vi-0.01.1_1-noarch-4.txt

-|   |   |-- aspell-vi-0.01.1_1-noarch-4.txz

-|   |   |-- aspell-vi-0.01.1_1-noarch-4.txz.asc

-|   |   |-- aspell-wa-0.50_0-noarch-4.txt

-|   |   |-- aspell-wa-0.50_0-noarch-4.txz

-|   |   |-- aspell-wa-0.50_0-noarch-4.txz.asc

-|   |   |-- aspell-yi-0.01.1_1-noarch-4.txt

-|   |   |-- aspell-yi-0.01.1_1-noarch-4.txz

-|   |   |-- aspell-yi-0.01.1_1-noarch-4.txz.asc

-|   |   |-- aspell-zu-0.50_0-noarch-4.txt

-|   |   |-- aspell-zu-0.50_0-noarch-4.txz

-|   |   `-- aspell-zu-0.50_0-noarch-4.txz.asc

-|   |-- bash-completion

-|   |   |-- bash-completion-1.3-noarch-4.txt

-|   |   |-- bash-completion-1.3-noarch-4.txz

-|   |   `-- bash-completion-1.3-noarch-4.txz.asc

-|   |-- bittornado

-|   |   |-- bittornado-0.3.18-noarch-2.txt

-|   |   |-- bittornado-0.3.18-noarch-2.txz

-|   |   `-- bittornado-0.3.18-noarch-2.txz.asc

-|   |-- bittorrent

-|   |   |-- README

-|   |   |-- bittorrent-4.4.0-noarch-3.txt

-|   |   |-- bittorrent-4.4.0-noarch-3.txz

-|   |   `-- bittorrent-4.4.0-noarch-3.txz.asc

-|   |-- brltty

-|   |   |-- brltty-4.2-x86_64-1.txt

-|   |   |-- brltty-4.2-x86_64-1.txz

-|   |   `-- brltty-4.2-x86_64-1.txz.asc

-|   |-- emacspeak

-|   |   |-- emacspeak-33.0-x86_64-1.txt

-|   |   |-- emacspeak-33.0-x86_64-1.txz

-|   |   `-- emacspeak-33.0-x86_64-1.txz.asc

-|   |-- flashplayer-plugin -> source/flashplayer-plugin

-|   |-- fvwm-2.6.1

-|   |   |-- fvwm-2.6.1-x86_64-1.txt

-|   |   |-- fvwm-2.6.1-x86_64-1.txz

-|   |   `-- fvwm-2.6.1-x86_64-1.txz.asc

-|   |-- google-chrome

-|   |   |-- GConf-2.32.1-x86_64-1.txt

-|   |   |-- GConf-2.32.1-x86_64-1.txz

-|   |   |-- GConf-2.32.1-x86_64-1.txz.asc

-|   |   |-- ORBit2-2.14.19-x86_64-1.txt

-|   |   |-- ORBit2-2.14.19-x86_64-1.txz

-|   |   |-- ORBit2-2.14.19-x86_64-1.txz.asc

-|   |   |-- README

-|   |   |-- google-chrome-pam-solibs-1.1.3-x86_64-1.txt

-|   |   |-- google-chrome-pam-solibs-1.1.3-x86_64-1.txz

-|   |   |-- google-chrome-pam-solibs-1.1.3-x86_64-1.txz.asc

-|   |   |-- google-chrome.SlackBuild

-|   |   `-- slack-desc

-|   |-- jdk-6

-|   |   |-- jdk-6u25-x86_64-1.txt

-|   |   |-- jdk-6u25-x86_64-1.txz

-|   |   `-- jdk-6u25-x86_64-1.txz.asc

-|   |-- mplayerplug-in

-|   |   |-- mplayerplug-in-3.55-x86_64-1.txt

-|   |   |-- mplayerplug-in-3.55-x86_64-1.txz

-|   |   `-- mplayerplug-in-3.55-x86_64-1.txz.asc

-|   |-- partitionmanager

-|   |   |-- partitionmanager-1.0.2-x86_64-1.txt

-|   |   |-- partitionmanager-1.0.2-x86_64-1.txz

-|   |   `-- partitionmanager-1.0.2-x86_64-1.txz.asc

-|   |-- recordmydesktop

-|   |   |-- recordmydesktop-0.3.8.1-x86_64-2.txt

-|   |   |-- recordmydesktop-0.3.8.1-x86_64-2.txz

-|   |   `-- recordmydesktop-0.3.8.1-x86_64-2.txz.asc

-|   |-- source

-|   |   |-- GConf

-|   |   |   |-- GConf-2.32.1.tar.xz

-|   |   |   |-- GConf.SlackBuild

-|   |   |   |-- GConf.url

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- ORBit2

-|   |   |   |-- ORBit2-2.14.19.tar.xz

-|   |   |   |-- ORBit2.SlackBuild

-|   |   |   |-- ORBit2.url

-|   |   |   `-- slack-desc

-|   |   |-- bash-completion

-|   |   |   |-- bash-completion-1.3.tar.bz2

-|   |   |   |-- bash-completion.SlackBuild

-|   |   |   |-- bash_completion.sh.gz

-|   |   |   |-- contrib

-|   |   |   |   |-- pkgtools

-|   |   |   |   |-- rpm2tgz

-|   |   |   |   |-- sbopkg

-|   |   |   |   |-- slackpkg

-|   |   |   |   `-- slapt

-|   |   |   |-- fixup-sh-script-completions.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- bittornado

-|   |   |   |-- BitTornado-0.3.18.tar.bz2

-|   |   |   |-- bittornado.SlackBuild

-|   |   |   |-- btdownloadxterm.sh.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- bittorrent

-|   |   |   |-- BitTorrent-4.4.0.tar.bz2

-|   |   |   |-- bittorrent-xterm.sh.gz

-|   |   |   |-- bittorrent.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- brltty

-|   |   |   |-- brltty-4.2.tar.xz

-|   |   |   |-- brltty.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- emacspeak

-|   |   |   |-- emacspeak-33.0.tar.xz

-|   |   |   |-- emacspeak.SlackBuild

-|   |   |   |-- emacspeak.tcl8.5.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- flashplayer-plugin

-|   |   |   |-- flashplayer-plugin.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- fvwm-2.6.1

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fvwm-2.6.1.tar.xz

-|   |   |   |-- fvwm.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- xinitrc.fvwm2.gz

-|   |   |-- grub

-|   |   |   |-- grub-0.97-x86_64.patch.gz

-|   |   |   |-- grub-0.97.tar.gz

-|   |   |   |-- grub-0.97.tar.gz.sig

-|   |   |   |-- grub.SlackBuild

-|   |   |   |-- grub_support_256byte_inode.patch.gz

-|   |   |   |-- grubconfig-1.28.tar.gz

-|   |   |   |-- grubconfig_localefix.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- jdk-6

-|   |   |   |-- COPYRIGHT

-|   |   |   |-- HOWTO-BUILD-TXZ

-|   |   |   |-- LICENSE

-|   |   |   |-- README.html

-|   |   |   |-- THIRDPARTYLICENSEREADME.txt

-|   |   |   |-- jdk.SlackBuild

-|   |   |   |-- profile.d

-|   |   |   |   |-- jdk.csh

-|   |   |   |   `-- jdk.sh

-|   |   |   |-- register.html

-|   |   |   |-- register_ja.html

-|   |   |   |-- register_zh_CN.html

-|   |   |   `-- slack-desc

-|   |   |-- mplayerplug-in

-|   |   |   |-- mplayerplug-in-3.55.tar.gz

-|   |   |   |-- mplayerplug-in.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pam

-|   |   |   |-- Linux-PAM-1.1.3.tar.xz

-|   |   |   |-- make-pam-solibs-for-chrome.sh

-|   |   |   |-- pam-redhat-0.99.10-1.tar.bz2

-|   |   |   |-- pam.SlackBuild

-|   |   |   |-- patches

-|   |   |   |   |-- pam-1.0.90-redhat-modules.patch.gz

-|   |   |   |   |-- pam-1.0.91-std-noclose.patch.gz

-|   |   |   |   |-- pam-1.1.0-notally.patch.gz

-|   |   |   |   |-- pam-1.1.1-faillock.patch.gz

-|   |   |   |   |-- pam-1.1.2-noflex.patch.gz

-|   |   |   |   |-- pam-1.1.3-faillock-screensaver.patch.gz

-|   |   |   |   |-- pam-1.1.3-limits-nosetreuid.patch.gz

-|   |   |   |   |-- pam-1.1.3-limits-range.patch.gz

-|   |   |   |   |-- pam-1.1.3-nouserenv.patch.gz

-|   |   |   |   |-- pam-1.1.3-pwhistory-incomplete.patch.gz

-|   |   |   |   `-- pam-1.1.3-securetty-console.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- partitionmanager

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- partitionmanager-1.0.2.tar.xz

-|   |   |   |-- partitionmanager.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- recordmydesktop

-|   |   |   |-- qt-recordmydesktop-0.3.8.tar.gz

-|   |   |   |-- recordmydesktop-0.3.8.1.tar.gz

-|   |   |   |-- recordmydesktop.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- tightvnc

-|   |   |   |-- _tightvnc.tar.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- tightvnc-1.3.10_unixsrc.tar.xz

-|   |   |   |-- tightvnc.SlackBuild

-|   |   |   `-- tightvnc.paths-and-perms.diff.gz

-|   |   `-- wicd

-|   |       |-- README.SLACKWARE

-|   |       |-- doinst.sh.gz

-|   |       |-- slack-desc

-|   |       |-- wicd-1.7.0-fix_EAP_fast_typo.diff.gz

-|   |       |-- wicd-1.7.0-fix_script_bug.diff.gz

-|   |       |-- wicd-1.7.0.tar.bz2

-|   |       `-- wicd.SlackBuild

-|   |-- tightvnc

-|   |   |-- tightvnc-1.3.10-x86_64-1.txt

-|   |   |-- tightvnc-1.3.10-x86_64-1.txz

-|   |   `-- tightvnc-1.3.10-x86_64-1.txz.asc

-|   |-- wicd

-|   |   |-- README.SLACKWARE

-|   |   |-- wicd-1.7.0-x86_64-2.txt

-|   |   |-- wicd-1.7.0-x86_64-2.txz

-|   |   `-- wicd-1.7.0-x86_64-2.txz.asc

-|   `-- xf86-video-nouveau-blacklist

-|       |-- xf86-video-nouveau-blacklist-noarch-1.txt

-|       |-- xf86-video-nouveau-blacklist-noarch-1.txz

-|       `-- xf86-video-nouveau-blacklist-noarch-1.txz.asc

-|-- isolinux

-|   |-- README.TXT

-|   |-- README_SPLIT.TXT

-|   |-- f2.txt

-|   |-- initrd.img

-|   |-- iso.sort

-|   |-- isolinux.bin

-|   |-- isolinux.cfg

-|   |-- message.txt

-|   |-- sbootmgr

-|   |   |-- RAWRITE.EXE

-|   |   |-- RAWRITE12.DOC

-|   |   |-- RAWRITE12.EXE

-|   |   |-- RAWRITE13.EXE -> RAWRITE.EXE

-|   |   |-- RAWRITENT.DOC

-|   |   |-- RAWRITENT.EXE

-|   |   |-- README.TXT

-|   |   `-- sbootmgr.dsk

-|   `-- setpkg

-|-- kernels

-|   |-- VERSIONS.TXT

-|   |-- huge.s

-|   |   |-- System.map.gz

-|   |   |-- bzImage

-|   |   `-- config

-|   |-- memtest

-|   |   |-- README

-|   |   `-- memtest

-|   `-- speakup.s

-|       `-- README.TXT

-|-- pasture

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   |-- PACKAGES.TXT

-|   |-- gxine-0.5.905-x86_64-1.txt

-|   |-- gxine-0.5.905-x86_64-1.txz

-|   |-- gxine-0.5.905-x86_64-1.txz.asc

-|   |-- make-3.81-x86_64-3.txt

-|   |-- make-3.81-x86_64-3.txz

-|   |-- make-3.81-x86_64-3.txz.asc

-|   |-- mesa-7.8.2-x86_64-1.txt

-|   |-- mesa-7.8.2-x86_64-1.txz

-|   |-- mesa-7.8.2-x86_64-1.txz.asc

-|   |-- source

-|   |   |-- gxine

-|   |   |   |-- gxine-0.5.905.tar.bz2

-|   |   |   |-- gxine.SlackBuild

-|   |   |   |-- gxine.desktop.gz

-|   |   |   `-- slack-desc

-|   |   |-- make

-|   |   |   |-- make-3.81.tar.bz2

-|   |   |   |-- make-3.81.tar.bz2.sig

-|   |   |   |-- make.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mesa-7.8.2

-|   |   |   |-- MesaDemos-7.8.2.tar.xz

-|   |   |   |-- MesaGLUT-7.8.2.tar.xz

-|   |   |   |-- MesaLib-7.8.2.tar.xz

-|   |   |   |-- README.GIT

-|   |   |   |-- get-mesa.sh

-|   |   |   |-- mesa.SlackBuild

-|   |   |   |-- mesa.url

-|   |   |   `-- slack-desc

-|   |   |-- xf86-video-ati

-|   |   |   `-- xf86-video-ati-6.13.2.tar.xz

-|   |   |-- xf86-video-intel

-|   |   `-- xf86-video-intel-2.14.0.tar.xz

-|   |-- xf86-video-ati-6.13.2-x86_64-1.txt

-|   |-- xf86-video-ati-6.13.2-x86_64-1.txz

-|   |-- xf86-video-ati-6.13.2-x86_64-1.txz.asc

-|   |-- xf86-video-intel-2.14.0-x86_64-1.txt

-|   |-- xf86-video-intel-2.14.0-x86_64-1.txz

-|   `-- xf86-video-intel-2.14.0-x86_64-1.txz.asc

-|-- patches

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   `-- PACKAGES.TXT

-|-- slackbook

-|   |-- html

-|   |   |-- TRADEMARKS.html

-|   |   |-- archive-files-bzip2.html

-|   |   |-- archive-files-tar.html

-|   |   |-- archive-files-zip.html

-|   |   |-- archive-files.html

-|   |   |-- basic-network-commands

-|   |   |   |-- elm.png

-|   |   |   |-- links.png

-|   |   |   |-- lynx.png

-|   |   |   |-- mutt.png

-|   |   |   |-- pine.png

-|   |   |   |-- talk.png

-|   |   |   `-- ytalk.png

-|   |   |-- basic-network-commands-dns.html

-|   |   |-- basic-network-commands-email.html

-|   |   |-- basic-network-commands-finger.html

-|   |   |-- basic-network-commands-ftp.html

-|   |   |-- basic-network-commands-ssh.html

-|   |   |-- basic-network-commands-talk.html

-|   |   |-- basic-network-commands-telnet.html

-|   |   |-- basic-network-commands-traceroute.html

-|   |   |-- basic-network-commands-web.html

-|   |   |-- basic-network-commands.html

-|   |   |-- book-preface.html

-|   |   |-- book.html

-|   |   |-- booting

-|   |   |   |-- setup-lilo-expert-w.png

-|   |   |   `-- setup-lilo-w.png

-|   |   |-- booting-dual.html

-|   |   |-- booting-loadlin.html

-|   |   |-- booting.html

-|   |   |-- docbook.css

-|   |   |-- emacs

-|   |   |   `-- emacs.png

-|   |   |-- emacs-basic-editing.html

-|   |   |-- emacs-buffers.html

-|   |   |-- emacs-modes.html

-|   |   |-- emacs-saving-files.html

-|   |   |-- emacs.html

-|   |   |-- essential-sysadmin-hardusers.html

-|   |   |-- essential-sysadmin-shutdown.html

-|   |   |-- essential-sysadmin.html

-|   |   |-- file-commands-copymove.html

-|   |   |-- file-commands-creation.html

-|   |   |-- file-commands-deletion.html

-|   |   |-- file-commands-link.html

-|   |   |-- file-commands-output.html

-|   |   |-- file-commands-pagers.html

-|   |   |-- file-commands.html

-|   |   |-- filesystem-structure-links.html

-|   |   |-- filesystem-structure-mounting.html

-|   |   |-- filesystem-structure-nfs.html

-|   |   |-- filesystem-structure-permissions.html

-|   |   |-- filesystem-structure.html

-|   |   |-- glossary.html

-|   |   |-- gpl.html

-|   |   |-- help-online.html

-|   |   |-- help.html

-|   |   |-- imagelib

-|   |   |   `-- admon

-|   |   |       |-- note.png

-|   |   |       `-- warning.png

-|   |   |-- index.html

-|   |   |-- installation

-|   |   |   |-- setup-bootdisk-w.png

-|   |   |   |-- setup-font-w.png

-|   |   |   |-- setup-hardware-clock-w.png

-|   |   |   |-- setup-help-w.png

-|   |   |   |-- setup-install-w.png

-|   |   |   |-- setup-kernel-w.png

-|   |   |   |-- setup-keymap-w.png

-|   |   |   |-- setup-lilo-w.png

-|   |   |   |-- setup-modem-w.png

-|   |   |   |-- setup-mouse-w.png

-|   |   |   |-- setup-program-w.png

-|   |   |   |-- setup-select-w.png

-|   |   |   |-- setup-source-w.png

-|   |   |   |-- setup-swap-w.png

-|   |   |   |-- setup-target-w.png

-|   |   |   |-- setup-timezone-w.png

-|   |   |   `-- setup-xwmconfig-w.png

-|   |   |-- installation-partitioning.html

-|   |   |-- installation-requirements.html

-|   |   |-- installation-setup.html

-|   |   |-- installation.html

-|   |   |-- introduction-opensource.html

-|   |   |-- introduction-slackware.html

-|   |   |-- introduction.html

-|   |   |-- network-configuration-hardware.html

-|   |   |-- network-configuration-nfs.html

-|   |   |-- network-configuration-ppp.html

-|   |   |-- network-configuration-tcpip.html

-|   |   |-- network-configuration-wireless.html

-|   |   |-- network-configuration.html

-|   |   |-- package-management

-|   |   |   |-- pkgtool-view-w.png

-|   |   |   `-- pkgtool-w.png

-|   |   |-- package-management-making-packages.html

-|   |   |-- package-management-making-tags-and-tagfiles.html

-|   |   |-- package-management-package-utilities.html

-|   |   |-- package-management.html

-|   |   |-- process-control-foregrounding.html

-|   |   |-- process-control-kill.html

-|   |   |-- process-control-ps.html

-|   |   |-- process-control-top.html

-|   |   |-- process-control.html

-|   |   |-- security-current.html

-|   |   |-- security-host.html

-|   |   |-- security.html

-|   |   |-- shell-bash.html

-|   |   |-- shell-command-line.html

-|   |   |-- shell-vt.html

-|   |   |-- shell.html

-|   |   |-- slackware_logo.png

-|   |   |-- system-configuration

-|   |   |   `-- make-menuconfig-w.png

-|   |   |-- system-configuration-kernel.html

-|   |   |-- system-configuration.html

-|   |   |-- vi

-|   |   |   `-- vim-splitedit.png

-|   |   |-- vi-configuration.html

-|   |   |-- vi-keys.html

-|   |   |-- vi-modes.html

-|   |   |-- vi-opening-files.html

-|   |   |-- vi-quitting-vi.html

-|   |   |-- vi-saving-files.html

-|   |   |-- vi.html

-|   |   |-- x-window-system

-|   |   |   |-- xorgconfig1-w.png

-|   |   |   |-- xorgconfig2-w.png

-|   |   |   |-- xorgconfig3-w.png

-|   |   |   |-- xorgconfig4-w.png

-|   |   |   `-- xwmconfig-w.png

-|   |   |-- x-window-system-xdm.html

-|   |   |-- x-window-system-xinitrc.html

-|   |   |-- x-window-system-xorgsetup.html

-|   |   |-- x-window-system-xwmconfig.html

-|   |   |-- x-window-system.html

-|   |   |-- zipslack-booting.html

-|   |   |-- zipslack-getting.html

-|   |   `-- zipslack.html

-|   |-- slackbook-2.0.pdf

-|   `-- slackbook-2.0.ps

-|-- slackware64

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   |-- PACKAGES.TXT -> ../PACKAGES.TXT

-|   |-- a

-|   |   |-- aaa_base-13.37-x86_64-3.txt

-|   |   |-- aaa_base-13.37-x86_64-3.txz

-|   |   |-- aaa_base-13.37-x86_64-3.txz.asc

-|   |   |-- aaa_elflibs-13.37-x86_64-7.txt

-|   |   |-- aaa_elflibs-13.37-x86_64-7.txz

-|   |   |-- aaa_elflibs-13.37-x86_64-7.txz.asc

-|   |   |-- aaa_terminfo-5.8-x86_64-1.txt

-|   |   |-- aaa_terminfo-5.8-x86_64-1.txz

-|   |   |-- aaa_terminfo-5.8-x86_64-1.txz.asc

-|   |   |-- acl-2.2.50-x86_64-1.txt

-|   |   |-- acl-2.2.50-x86_64-1.txz

-|   |   |-- acl-2.2.50-x86_64-1.txz.asc

-|   |   |-- acpid-2.0.9-x86_64-1.txt

-|   |   |-- acpid-2.0.9-x86_64-1.txz

-|   |   |-- acpid-2.0.9-x86_64-1.txz.asc

-|   |   |-- apmd-3.2.2-x86_64-3.txt

-|   |   |-- apmd-3.2.2-x86_64-3.txz

-|   |   |-- apmd-3.2.2-x86_64-3.txz.asc

-|   |   |-- attr-2.4.45-x86_64-1.txt

-|   |   |-- attr-2.4.45-x86_64-1.txz

-|   |   |-- attr-2.4.45-x86_64-1.txz.asc

-|   |   |-- bash-4.1.010-x86_64-1.txt

-|   |   |-- bash-4.1.010-x86_64-1.txz

-|   |   |-- bash-4.1.010-x86_64-1.txz.asc

-|   |   |-- bin-11.1-x86_64-1.txt

-|   |   |-- bin-11.1-x86_64-1.txz

-|   |   |-- bin-11.1-x86_64-1.txz.asc

-|   |   |-- btrfs-progs-20110327-x86_64-1.txt

-|   |   |-- btrfs-progs-20110327-x86_64-1.txz

-|   |   |-- btrfs-progs-20110327-x86_64-1.txz.asc

-|   |   |-- bzip2-1.0.6-x86_64-1.txt

-|   |   |-- bzip2-1.0.6-x86_64-1.txz

-|   |   |-- bzip2-1.0.6-x86_64-1.txz.asc

-|   |   |-- coreutils-8.11-x86_64-1.txt

-|   |   |-- coreutils-8.11-x86_64-1.txz

-|   |   |-- coreutils-8.11-x86_64-1.txz.asc

-|   |   |-- cpio-2.11-x86_64-1.txt

-|   |   |-- cpio-2.11-x86_64-1.txz

-|   |   |-- cpio-2.11-x86_64-1.txz.asc

-|   |   |-- cpufrequtils-008-x86_64-1.txt

-|   |   |-- cpufrequtils-008-x86_64-1.txz

-|   |   |-- cpufrequtils-008-x86_64-1.txz.asc

-|   |   |-- cryptsetup-1.2.0-x86_64-1.txt

-|   |   |-- cryptsetup-1.2.0-x86_64-1.txz

-|   |   |-- cryptsetup-1.2.0-x86_64-1.txz.asc

-|   |   |-- cups-1.4.6-x86_64-1.txt

-|   |   |-- cups-1.4.6-x86_64-1.txz

-|   |   |-- cups-1.4.6-x86_64-1.txz.asc

-|   |   |-- cxxlibs-6.0.14-x86_64-1.txt

-|   |   |-- cxxlibs-6.0.14-x86_64-1.txz

-|   |   |-- cxxlibs-6.0.14-x86_64-1.txz.asc

-|   |   |-- dbus-1.4.1-x86_64-1.txt

-|   |   |-- dbus-1.4.1-x86_64-1.txz

-|   |   |-- dbus-1.4.1-x86_64-1.txz.asc

-|   |   |-- dcron-4.4-x86_64-1.txt

-|   |   |-- dcron-4.4-x86_64-1.txz

-|   |   |-- dcron-4.4-x86_64-1.txz.asc

-|   |   |-- devs-2.3.1-noarch-25.txt

-|   |   |-- devs-2.3.1-noarch-25.txz

-|   |   |-- devs-2.3.1-noarch-25.txz.asc

-|   |   |-- dialog-1.1_20100428-x86_64-2.txt

-|   |   |-- dialog-1.1_20100428-x86_64-2.txz

-|   |   |-- dialog-1.1_20100428-x86_64-2.txz.asc

-|   |   |-- dosfstools-3.0.11-x86_64-2.txt

-|   |   |-- dosfstools-3.0.11-x86_64-2.txz

-|   |   |-- dosfstools-3.0.11-x86_64-2.txz.asc

-|   |   |-- e2fsprogs-1.41.14-x86_64-1.txt

-|   |   |-- e2fsprogs-1.41.14-x86_64-1.txz

-|   |   |-- e2fsprogs-1.41.14-x86_64-1.txz.asc

-|   |   |-- ed-1.4-x86_64-1.txt

-|   |   |-- ed-1.4-x86_64-1.txz

-|   |   |-- ed-1.4-x86_64-1.txz.asc

-|   |   |-- eject-2.1.5-x86_64-2.txt

-|   |   |-- eject-2.1.5-x86_64-2.txz

-|   |   |-- eject-2.1.5-x86_64-2.txz.asc

-|   |   |-- elvis-2.2_0-x86_64-2.txt

-|   |   |-- elvis-2.2_0-x86_64-2.txz

-|   |   |-- elvis-2.2_0-x86_64-2.txz.asc

-|   |   |-- etc-13.013-x86_64-1.txt

-|   |   |-- etc-13.013-x86_64-1.txz

-|   |   |-- etc-13.013-x86_64-1.txz.asc

-|   |   |-- file-5.05-x86_64-1.txt

-|   |   |-- file-5.05-x86_64-1.txz

-|   |   |-- file-5.05-x86_64-1.txz.asc

-|   |   |-- findutils-4.4.2-x86_64-1.txt

-|   |   |-- findutils-4.4.2-x86_64-1.txz

-|   |   |-- findutils-4.4.2-x86_64-1.txz.asc

-|   |   |-- floppy-5.4-x86_64-3.txt

-|   |   |-- floppy-5.4-x86_64-3.txz

-|   |   |-- floppy-5.4-x86_64-3.txz.asc

-|   |   |-- gawk-3.1.8-x86_64-1.txt

-|   |   |-- gawk-3.1.8-x86_64-1.txz

-|   |   |-- gawk-3.1.8-x86_64-1.txz.asc

-|   |   |-- gdisk-0.6.14-x86_64-1.txt

-|   |   |-- gdisk-0.6.14-x86_64-1.txz

-|   |   |-- gdisk-0.6.14-x86_64-1.txz.asc

-|   |   |-- genpower-1.0.5-x86_64-2.txt

-|   |   |-- genpower-1.0.5-x86_64-2.txz

-|   |   |-- genpower-1.0.5-x86_64-2.txz.asc

-|   |   |-- gettext-0.18.1.1-x86_64-1.txt

-|   |   |-- gettext-0.18.1.1-x86_64-1.txz

-|   |   |-- gettext-0.18.1.1-x86_64-1.txz.asc

-|   |   |-- getty-ps-2.1.0b-x86_64-1.txt

-|   |   |-- getty-ps-2.1.0b-x86_64-1.txz

-|   |   |-- getty-ps-2.1.0b-x86_64-1.txz.asc

-|   |   |-- glibc-solibs-2.13-x86_64-4.txt

-|   |   |-- glibc-solibs-2.13-x86_64-4.txz

-|   |   |-- glibc-solibs-2.13-x86_64-4.txz.asc

-|   |   |-- glibc-zoneinfo-2.13-noarch-4.txt

-|   |   |-- glibc-zoneinfo-2.13-noarch-4.txz

-|   |   |-- glibc-zoneinfo-2.13-noarch-4.txz.asc

-|   |   |-- gpm-1.20.1-x86_64-5.txt

-|   |   |-- gpm-1.20.1-x86_64-5.txz

-|   |   |-- gpm-1.20.1-x86_64-5.txz.asc

-|   |   |-- grep-2.7-x86_64-1.txt

-|   |   |-- grep-2.7-x86_64-1.txz

-|   |   |-- grep-2.7-x86_64-1.txz.asc

-|   |   |-- gzip-1.4-x86_64-1.tgz

-|   |   |-- gzip-1.4-x86_64-1.tgz.asc

-|   |   |-- gzip-1.4-x86_64-1.txt

-|   |   |-- hdparm-9.37-x86_64-1.txt

-|   |   |-- hdparm-9.37-x86_64-1.txz

-|   |   |-- hdparm-9.37-x86_64-1.txz.asc

-|   |   |-- infozip-6.0-x86_64-1.txt

-|   |   |-- infozip-6.0-x86_64-1.txz

-|   |   |-- infozip-6.0-x86_64-1.txz.asc

-|   |   |-- inotify-tools-3.14-x86_64-1.txt

-|   |   |-- inotify-tools-3.14-x86_64-1.txz

-|   |   |-- inotify-tools-3.14-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- jfsutils-1.1.15-x86_64-1.txt

-|   |   |-- jfsutils-1.1.15-x86_64-1.txz

-|   |   |-- jfsutils-1.1.15-x86_64-1.txz.asc

-|   |   |-- kbd-1.15.2-x86_64-1.txt

-|   |   |-- kbd-1.15.2-x86_64-1.txz

-|   |   |-- kbd-1.15.2-x86_64-1.txz.asc

-|   |   |-- kernel-firmware-2.6.37.6-noarch-2.txt

-|   |   |-- kernel-firmware-2.6.37.6-noarch-2.txz

-|   |   |-- kernel-firmware-2.6.37.6-noarch-2.txz.asc

-|   |   |-- kernel-generic-2.6.37.6-x86_64-2.txt

-|   |   |-- kernel-generic-2.6.37.6-x86_64-2.txz

-|   |   |-- kernel-generic-2.6.37.6-x86_64-2.txz.asc

-|   |   |-- kernel-huge-2.6.37.6-x86_64-2.txt

-|   |   |-- kernel-huge-2.6.37.6-x86_64-2.txz

-|   |   |-- kernel-huge-2.6.37.6-x86_64-2.txz.asc

-|   |   |-- kernel-modules-2.6.37.6-x86_64-2.txt

-|   |   |-- kernel-modules-2.6.37.6-x86_64-2.txz

-|   |   |-- kernel-modules-2.6.37.6-x86_64-2.txz.asc

-|   |   |-- less-443-x86_64-1.txt

-|   |   |-- less-443-x86_64-1.txz

-|   |   |-- less-443-x86_64-1.txz.asc

-|   |   |-- lha-114i-x86_64-1.txt

-|   |   |-- lha-114i-x86_64-1.txz

-|   |   |-- lha-114i-x86_64-1.txz.asc

-|   |   |-- libcgroup-0.37.1-x86_64-1.txt

-|   |   |-- libcgroup-0.37.1-x86_64-1.txz

-|   |   |-- libcgroup-0.37.1-x86_64-1.txz.asc

-|   |   |-- lilo-22.8-x86_64-16.txt

-|   |   |-- lilo-22.8-x86_64-16.txz

-|   |   |-- lilo-22.8-x86_64-16.txz.asc

-|   |   |-- logrotate-3.7.8-x86_64-1.txt

-|   |   |-- logrotate-3.7.8-x86_64-1.txz

-|   |   |-- logrotate-3.7.8-x86_64-1.txz.asc

-|   |   |-- lrzip-0.602-x86_64-1.txt

-|   |   |-- lrzip-0.602-x86_64-1.txz

-|   |   |-- lrzip-0.602-x86_64-1.txz.asc

-|   |   |-- lvm2-2.02.84-x86_64-1.txt

-|   |   |-- lvm2-2.02.84-x86_64-1.txz

-|   |   |-- lvm2-2.02.84-x86_64-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mcelog-1.0pre3-x86_64-1.txt

-|   |   |-- mcelog-1.0pre3-x86_64-1.txz

-|   |   |-- mcelog-1.0pre3-x86_64-1.txz.asc

-|   |   |-- mdadm-3.1.5-x86_64-1.txt

-|   |   |-- mdadm-3.1.5-x86_64-1.txz

-|   |   |-- mdadm-3.1.5-x86_64-1.txz.asc

-|   |   |-- minicom-2.5-x86_64-1.txt

-|   |   |-- minicom-2.5-x86_64-1.txz

-|   |   |-- minicom-2.5-x86_64-1.txz.asc

-|   |   |-- mkinitrd-1.4.6-x86_64-11.txt

-|   |   |-- mkinitrd-1.4.6-x86_64-11.txz

-|   |   |-- mkinitrd-1.4.6-x86_64-11.txz.asc

-|   |   |-- module-init-tools-3.12-x86_64-2.txt

-|   |   |-- module-init-tools-3.12-x86_64-2.txz

-|   |   |-- module-init-tools-3.12-x86_64-2.txz.asc

-|   |   |-- mt-st-0.9b-x86_64-2.txt

-|   |   |-- mt-st-0.9b-x86_64-2.txz

-|   |   |-- mt-st-0.9b-x86_64-2.txz.asc

-|   |   |-- mtx-1.3.12-x86_64-1.txt

-|   |   |-- mtx-1.3.12-x86_64-1.txz

-|   |   |-- mtx-1.3.12-x86_64-1.txz.asc

-|   |   |-- ncompress-4.2.4.3-x86_64-1.txt

-|   |   |-- ncompress-4.2.4.3-x86_64-1.txz

-|   |   |-- ncompress-4.2.4.3-x86_64-1.txz.asc

-|   |   |-- ntfs-3g-2011.1.15-x86_64-1.txt

-|   |   |-- ntfs-3g-2011.1.15-x86_64-1.txz

-|   |   |-- ntfs-3g-2011.1.15-x86_64-1.txz.asc

-|   |   |-- openssl-solibs-0.9.8r-x86_64-3.txt

-|   |   |-- openssl-solibs-0.9.8r-x86_64-3.txz

-|   |   |-- openssl-solibs-0.9.8r-x86_64-3.txz.asc

-|   |   |-- patch-2.6.1-x86_64-1.txt

-|   |   |-- patch-2.6.1-x86_64-1.txz

-|   |   |-- patch-2.6.1-x86_64-1.txz.asc

-|   |   |-- pciutils-3.1.7-x86_64-1.txt

-|   |   |-- pciutils-3.1.7-x86_64-1.txz

-|   |   |-- pciutils-3.1.7-x86_64-1.txz.asc

-|   |   |-- pcmciautils-017-x86_64-1.txt

-|   |   |-- pcmciautils-017-x86_64-1.txz

-|   |   |-- pcmciautils-017-x86_64-1.txz.asc

-|   |   |-- pkgtools-13.37-noarch-9.tgz

-|   |   |-- pkgtools-13.37-noarch-9.tgz.asc

-|   |   |-- pkgtools-13.37-noarch-9.txt

-|   |   |-- procps-3.2.8-x86_64-3.txt

-|   |   |-- procps-3.2.8-x86_64-3.txz

-|   |   |-- procps-3.2.8-x86_64-3.txz.asc

-|   |   |-- quota-3.17-x86_64-1.txt

-|   |   |-- quota-3.17-x86_64-1.txz

-|   |   |-- quota-3.17-x86_64-1.txz.asc

-|   |   |-- reiserfsprogs-3.6.21-x86_64-1.txt

-|   |   |-- reiserfsprogs-3.6.21-x86_64-1.txz

-|   |   |-- reiserfsprogs-3.6.21-x86_64-1.txz.asc

-|   |   |-- rpm2tgz-1.2.2-x86_64-1.txt

-|   |   |-- rpm2tgz-1.2.2-x86_64-1.txz

-|   |   |-- rpm2tgz-1.2.2-x86_64-1.txz.asc

-|   |   |-- sdparm-1.06-x86_64-1.txt

-|   |   |-- sdparm-1.06-x86_64-1.txz

-|   |   |-- sdparm-1.06-x86_64-1.txz.asc

-|   |   |-- sed-4.2.1-x86_64-1.txt

-|   |   |-- sed-4.2.1-x86_64-1.txz

-|   |   |-- sed-4.2.1-x86_64-1.txz.asc

-|   |   |-- shadow-4.1.4.3-x86_64-2.txt

-|   |   |-- shadow-4.1.4.3-x86_64-2.txz

-|   |   |-- shadow-4.1.4.3-x86_64-2.txz.asc

-|   |   |-- sharutils-4.11-x86_64-1.txt

-|   |   |-- sharutils-4.11-x86_64-1.txz

-|   |   |-- sharutils-4.11-x86_64-1.txz.asc

-|   |   |-- slocate-3.1-x86_64-3.txt

-|   |   |-- slocate-3.1-x86_64-3.txz

-|   |   |-- slocate-3.1-x86_64-3.txz.asc

-|   |   |-- smartmontools-5.40-x86_64-1.txt

-|   |   |-- smartmontools-5.40-x86_64-1.txz

-|   |   |-- smartmontools-5.40-x86_64-1.txz.asc

-|   |   |-- splitvt-1.6.5-x86_64-1.txt

-|   |   |-- splitvt-1.6.5-x86_64-1.txz

-|   |   |-- splitvt-1.6.5-x86_64-1.txz.asc

-|   |   |-- sysfsutils-2.1.0-x86_64-1.txt

-|   |   |-- sysfsutils-2.1.0-x86_64-1.txz

-|   |   |-- sysfsutils-2.1.0-x86_64-1.txz.asc

-|   |   |-- sysklogd-1.5-x86_64-1.txt

-|   |   |-- sysklogd-1.5-x86_64-1.txz

-|   |   |-- sysklogd-1.5-x86_64-1.txz.asc

-|   |   |-- syslinux-3.84-x86_64-2.txt

-|   |   |-- syslinux-3.84-x86_64-2.txz

-|   |   |-- syslinux-3.84-x86_64-2.txz.asc

-|   |   |-- sysvinit-2.86-x86_64-6.txt

-|   |   |-- sysvinit-2.86-x86_64-6.txz

-|   |   |-- sysvinit-2.86-x86_64-6.txz.asc

-|   |   |-- sysvinit-functions-8.53-x86_64-2.txt

-|   |   |-- sysvinit-functions-8.53-x86_64-2.txz

-|   |   |-- sysvinit-functions-8.53-x86_64-2.txz.asc

-|   |   |-- sysvinit-scripts-1.2-noarch-43.txt

-|   |   |-- sysvinit-scripts-1.2-noarch-43.txz

-|   |   |-- sysvinit-scripts-1.2-noarch-43.txz.asc

-|   |   |-- tagfile

-|   |   |-- tar-1.26-x86_64-1.tgz

-|   |   |-- tar-1.26-x86_64-1.tgz.asc

-|   |   |-- tar-1.26-x86_64-1.txt

-|   |   |-- tcsh-6.17.00-x86_64-1.txt

-|   |   |-- tcsh-6.17.00-x86_64-1.txz

-|   |   |-- tcsh-6.17.00-x86_64-1.txz.asc

-|   |   |-- time-1.7-x86_64-1.txt

-|   |   |-- time-1.7-x86_64-1.txz

-|   |   |-- time-1.7-x86_64-1.txz.asc

-|   |   |-- tree-1.5.3-x86_64-1.txt

-|   |   |-- tree-1.5.3-x86_64-1.txz

-|   |   |-- tree-1.5.3-x86_64-1.txz.asc

-|   |   |-- udev-165-x86_64-2.txt

-|   |   |-- udev-165-x86_64-2.txz

-|   |   |-- udev-165-x86_64-2.txz.asc

-|   |   |-- unarj-265-x86_64-1.txt

-|   |   |-- unarj-265-x86_64-1.txz

-|   |   |-- unarj-265-x86_64-1.txz.asc

-|   |   |-- usb_modeswitch-1.1.6-x86_64-1.txt

-|   |   |-- usb_modeswitch-1.1.6-x86_64-1.txz

-|   |   |-- usb_modeswitch-1.1.6-x86_64-1.txz.asc

-|   |   |-- usbutils-002-x86_64-1.txt

-|   |   |-- usbutils-002-x86_64-1.txz

-|   |   |-- usbutils-002-x86_64-1.txz.asc

-|   |   |-- utempter-1.1.5-x86_64-1.txt

-|   |   |-- utempter-1.1.5-x86_64-1.txz

-|   |   |-- utempter-1.1.5-x86_64-1.txz.asc

-|   |   |-- util-linux-2.19-x86_64-1.txt

-|   |   |-- util-linux-2.19-x86_64-1.txz

-|   |   |-- util-linux-2.19-x86_64-1.txz.asc

-|   |   |-- which-2.20-x86_64-1.txt

-|   |   |-- which-2.20-x86_64-1.txz

-|   |   |-- which-2.20-x86_64-1.txz.asc

-|   |   |-- xfsprogs-3.1.4-x86_64-1.txt

-|   |   |-- xfsprogs-3.1.4-x86_64-1.txz

-|   |   |-- xfsprogs-3.1.4-x86_64-1.txz.asc

-|   |   |-- xz-5.0.2-x86_64-1.tgz

-|   |   |-- xz-5.0.2-x86_64-1.tgz.asc

-|   |   |-- xz-5.0.2-x86_64-1.txt

-|   |   |-- zoo-2.10_22-x86_64-1.txt

-|   |   |-- zoo-2.10_22-x86_64-1.txz

-|   |   `-- zoo-2.10_22-x86_64-1.txz.asc

-|   |-- ap

-|   |   |-- a2ps-4.14-x86_64-5.txt

-|   |   |-- a2ps-4.14-x86_64-5.txz

-|   |   |-- a2ps-4.14-x86_64-5.txz.asc

-|   |   |-- acct-6.5.4-x86_64-1.txt

-|   |   |-- acct-6.5.4-x86_64-1.txz

-|   |   |-- acct-6.5.4-x86_64-1.txz.asc

-|   |   |-- alsa-utils-1.0.24.2-x86_64-1.txt

-|   |   |-- alsa-utils-1.0.24.2-x86_64-1.txz

-|   |   |-- alsa-utils-1.0.24.2-x86_64-1.txz.asc

-|   |   |-- amp-0.7.6-x86_64-1.txt

-|   |   |-- amp-0.7.6-x86_64-1.txz

-|   |   |-- amp-0.7.6-x86_64-1.txz.asc

-|   |   |-- ash-0.4.0-x86_64-2.txt

-|   |   |-- ash-0.4.0-x86_64-2.txz

-|   |   |-- ash-0.4.0-x86_64-2.txz.asc

-|   |   |-- at-3.1.12-x86_64-1.txt

-|   |   |-- at-3.1.12-x86_64-1.txz

-|   |   |-- at-3.1.12-x86_64-1.txz.asc

-|   |   |-- aumix-2.9.1-x86_64-1.txt

-|   |   |-- aumix-2.9.1-x86_64-1.txz

-|   |   |-- aumix-2.9.1-x86_64-1.txz.asc

-|   |   |-- bc-1.06.95-x86_64-2.txt

-|   |   |-- bc-1.06.95-x86_64-2.txz

-|   |   |-- bc-1.06.95-x86_64-2.txz.asc

-|   |   |-- bpe-2.01.00-x86_64-2.txt

-|   |   |-- bpe-2.01.00-x86_64-2.txz

-|   |   |-- bpe-2.01.00-x86_64-2.txz.asc

-|   |   |-- cdparanoia-III_10.2-x86_64-1.txt

-|   |   |-- cdparanoia-III_10.2-x86_64-1.txz

-|   |   |-- cdparanoia-III_10.2-x86_64-1.txz.asc

-|   |   |-- cdrdao-1.2.3-x86_64-1.txt

-|   |   |-- cdrdao-1.2.3-x86_64-1.txz

-|   |   |-- cdrdao-1.2.3-x86_64-1.txz.asc

-|   |   |-- cdrtools-3.01a02-x86_64-1.txt

-|   |   |-- cdrtools-3.01a02-x86_64-1.txz

-|   |   |-- cdrtools-3.01a02-x86_64-1.txz.asc

-|   |   |-- dc3dd-6.12.3-x86_64-1.txt

-|   |   |-- dc3dd-6.12.3-x86_64-1.txz

-|   |   |-- dc3dd-6.12.3-x86_64-1.txz.asc

-|   |   |-- ddrescue-1.14-x86_64-1.txt

-|   |   |-- ddrescue-1.14-x86_64-1.txz

-|   |   |-- ddrescue-1.14-x86_64-1.txz.asc

-|   |   |-- diffstat-1.53-x86_64-1.txt

-|   |   |-- diffstat-1.53-x86_64-1.txz

-|   |   |-- diffstat-1.53-x86_64-1.txz.asc

-|   |   |-- diffutils-3.0-x86_64-1.txt

-|   |   |-- diffutils-3.0-x86_64-1.txz

-|   |   |-- diffutils-3.0-x86_64-1.txz.asc

-|   |   |-- dmapi-2.2.10-x86_64-1.txt

-|   |   |-- dmapi-2.2.10-x86_64-1.txz

-|   |   |-- dmapi-2.2.10-x86_64-1.txz.asc

-|   |   |-- dmidecode-2.11-x86_64-1.txt

-|   |   |-- dmidecode-2.11-x86_64-1.txz

-|   |   |-- dmidecode-2.11-x86_64-1.txz.asc

-|   |   |-- dvd+rw-tools-7.1-x86_64-2.txt

-|   |   |-- dvd+rw-tools-7.1-x86_64-2.txz

-|   |   |-- dvd+rw-tools-7.1-x86_64-2.txz.asc

-|   |   |-- enscript-1.6.5.2-x86_64-1.txt

-|   |   |-- enscript-1.6.5.2-x86_64-1.txz

-|   |   |-- enscript-1.6.5.2-x86_64-1.txz.asc

-|   |   |-- flac-1.2.1-x86_64-3.txt

-|   |   |-- flac-1.2.1-x86_64-3.txz

-|   |   |-- flac-1.2.1-x86_64-3.txz.asc

-|   |   |-- foomatic-filters-4.0.6-x86_64-1.txt

-|   |   |-- foomatic-filters-4.0.6-x86_64-1.txz

-|   |   |-- foomatic-filters-4.0.6-x86_64-1.txz.asc

-|   |   |-- ghostscript-9.00-x86_64-2.txt

-|   |   |-- ghostscript-9.00-x86_64-2.txz

-|   |   |-- ghostscript-9.00-x86_64-2.txz.asc

-|   |   |-- ghostscript-fonts-std-8.11-noarch-1.txt

-|   |   |-- ghostscript-fonts-std-8.11-noarch-1.txz

-|   |   |-- ghostscript-fonts-std-8.11-noarch-1.txz.asc

-|   |   |-- gphoto2-2.4.10-x86_64-1.txt

-|   |   |-- gphoto2-2.4.10-x86_64-1.txz

-|   |   |-- gphoto2-2.4.10-x86_64-1.txz.asc

-|   |   |-- groff-1.21-x86_64-1.txt

-|   |   |-- groff-1.21-x86_64-1.txz

-|   |   |-- groff-1.21-x86_64-1.txz.asc

-|   |   |-- gutenprint-5.2.6-x86_64-1.txt

-|   |   |-- gutenprint-5.2.6-x86_64-1.txz

-|   |   |-- gutenprint-5.2.6-x86_64-1.txz.asc

-|   |   |-- hplip-3.11.3a-x86_64-1.txt

-|   |   |-- hplip-3.11.3a-x86_64-1.txz

-|   |   |-- hplip-3.11.3a-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- ispell-3.2.06-x86_64-1.txt

-|   |   |-- ispell-3.2.06-x86_64-1.txz

-|   |   |-- ispell-3.2.06-x86_64-1.txz.asc

-|   |   |-- jed-0.99_19-x86_64-1.txt

-|   |   |-- jed-0.99_19-x86_64-1.txz

-|   |   |-- jed-0.99_19-x86_64-1.txz.asc

-|   |   |-- joe-3.7-x86_64-1.txt

-|   |   |-- joe-3.7-x86_64-1.txz

-|   |   |-- joe-3.7-x86_64-1.txz.asc

-|   |   |-- jove-4.16.0.73-x86_64-1.txt

-|   |   |-- jove-4.16.0.73-x86_64-1.txz

-|   |   |-- jove-4.16.0.73-x86_64-1.txz.asc

-|   |   |-- ksh93-2010_06_21-x86_64-1.txt

-|   |   |-- ksh93-2010_06_21-x86_64-1.txz

-|   |   |-- ksh93-2010_06_21-x86_64-1.txz.asc

-|   |   |-- libx86-1.1-x86_64-1.txt

-|   |   |-- libx86-1.1-x86_64-1.txz

-|   |   |-- libx86-1.1-x86_64-1.txz.asc

-|   |   |-- linuxdoc-tools-0.9.66-x86_64-8.txt

-|   |   |-- linuxdoc-tools-0.9.66-x86_64-8.txz

-|   |   |-- linuxdoc-tools-0.9.66-x86_64-8.txz.asc

-|   |   |-- lm_sensors-3.1.2-x86_64-1.txt

-|   |   |-- lm_sensors-3.1.2-x86_64-1.txz

-|   |   |-- lm_sensors-3.1.2-x86_64-1.txz.asc

-|   |   |-- lsof-4.83-x86_64-1.txt

-|   |   |-- lsof-4.83-x86_64-1.txz

-|   |   |-- lsof-4.83-x86_64-1.txz.asc

-|   |   |-- lsscsi-0.24-x86_64-1.txt

-|   |   |-- lsscsi-0.24-x86_64-1.txz

-|   |   |-- lsscsi-0.24-x86_64-1.txz.asc

-|   |   |-- lxc-0.7.4-x86_64-2.txt

-|   |   |-- lxc-0.7.4-x86_64-2.txz

-|   |   |-- lxc-0.7.4-x86_64-2.txz.asc

-|   |   |-- madplay-0.15.2b-x86_64-3.txt

-|   |   |-- madplay-0.15.2b-x86_64-3.txz

-|   |   |-- madplay-0.15.2b-x86_64-3.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- man-1.6g-x86_64-1.txt

-|   |   |-- man-1.6g-x86_64-1.txz

-|   |   |-- man-1.6g-x86_64-1.txz.asc

-|   |   |-- man-pages-3.32-noarch-1.txt

-|   |   |-- man-pages-3.32-noarch-1.txz

-|   |   |-- man-pages-3.32-noarch-1.txz.asc

-|   |   |-- mc-4.7.5.2-x86_64-1.txt

-|   |   |-- mc-4.7.5.2-x86_64-1.txz

-|   |   |-- mc-4.7.5.2-x86_64-1.txz.asc

-|   |   |-- moc-2.5.0_alpha4-x86_64-1.txt

-|   |   |-- moc-2.5.0_alpha4-x86_64-1.txz

-|   |   |-- moc-2.5.0_alpha4-x86_64-1.txz.asc

-|   |   |-- most-5.0.0a-x86_64-2.txt

-|   |   |-- most-5.0.0a-x86_64-2.txz

-|   |   |-- most-5.0.0a-x86_64-2.txz.asc

-|   |   |-- mpg123-1.13.3-x86_64-1.txt

-|   |   |-- mpg123-1.13.3-x86_64-1.txz

-|   |   |-- mpg123-1.13.3-x86_64-1.txz.asc

-|   |   |-- mysql-5.1.56-x86_64-1.txt

-|   |   |-- mysql-5.1.56-x86_64-1.txz

-|   |   |-- mysql-5.1.56-x86_64-1.txz.asc

-|   |   |-- nano-2.3.0-x86_64-1.txt

-|   |   |-- nano-2.3.0-x86_64-1.txz

-|   |   |-- nano-2.3.0-x86_64-1.txz.asc

-|   |   |-- normalize-0.7.7-x86_64-1.txt

-|   |   |-- normalize-0.7.7-x86_64-1.txz

-|   |   |-- normalize-0.7.7-x86_64-1.txz.asc

-|   |   |-- ntfsprogs-2.0.0-x86_64-2.txt

-|   |   |-- ntfsprogs-2.0.0-x86_64-2.txz

-|   |   |-- ntfsprogs-2.0.0-x86_64-2.txz.asc

-|   |   |-- pm-utils-1.4.1-x86_64-2.txt

-|   |   |-- pm-utils-1.4.1-x86_64-2.txz

-|   |   |-- pm-utils-1.4.1-x86_64-2.txz.asc

-|   |   |-- powertop-1.13-x86_64-1.txt

-|   |   |-- powertop-1.13-x86_64-1.txz

-|   |   |-- powertop-1.13-x86_64-1.txz.asc

-|   |   |-- radeontool-1.6.1-x86_64-1.txt

-|   |   |-- radeontool-1.6.1-x86_64-1.txz

-|   |   |-- radeontool-1.6.1-x86_64-1.txz.asc

-|   |   |-- rexima-1.4-x86_64-2.txt

-|   |   |-- rexima-1.4-x86_64-2.txz

-|   |   |-- rexima-1.4-x86_64-2.txz.asc

-|   |   |-- rpm-4.8.1-x86_64-1.txt

-|   |   |-- rpm-4.8.1-x86_64-1.txz

-|   |   |-- rpm-4.8.1-x86_64-1.txz.asc

-|   |   |-- rzip-2.1-x86_64-1.txt

-|   |   |-- rzip-2.1-x86_64-1.txz

-|   |   |-- rzip-2.1-x86_64-1.txz.asc

-|   |   |-- sc-7.16-x86_64-3.txt

-|   |   |-- sc-7.16-x86_64-3.txz

-|   |   |-- sc-7.16-x86_64-3.txz.asc

-|   |   |-- screen-4.0.3-x86_64-2.txt

-|   |   |-- screen-4.0.3-x86_64-2.txz

-|   |   |-- screen-4.0.3-x86_64-2.txz.asc

-|   |   |-- seejpeg-1.10-x86_64-1.txt

-|   |   |-- seejpeg-1.10-x86_64-1.txz

-|   |   |-- seejpeg-1.10-x86_64-1.txz.asc

-|   |   |-- slackpkg-2.82.0-noarch-5.tgz

-|   |   |-- slackpkg-2.82.0-noarch-5.tgz.asc

-|   |   |-- slackpkg-2.82.0-noarch-5.txt

-|   |   |-- sox-14.3.2-x86_64-1.txt

-|   |   |-- sox-14.3.2-x86_64-1.txz

-|   |   |-- sox-14.3.2-x86_64-1.txz.asc

-|   |   |-- sqlite-3.7.5-x86_64-1.txt

-|   |   |-- sqlite-3.7.5-x86_64-1.txz

-|   |   |-- sqlite-3.7.5-x86_64-1.txz.asc

-|   |   |-- sudo-1.7.4p6-x86_64-1.txt

-|   |   |-- sudo-1.7.4p6-x86_64-1.txz

-|   |   |-- sudo-1.7.4p6-x86_64-1.txz.asc

-|   |   |-- sysstat-9.0.6.1-x86_64-1.txt

-|   |   |-- sysstat-9.0.6.1-x86_64-1.txz

-|   |   |-- sysstat-9.0.6.1-x86_64-1.txz.asc

-|   |   |-- tagfile

-|   |   |-- texinfo-4.13a-x86_64-4.txt

-|   |   |-- texinfo-4.13a-x86_64-4.txz

-|   |   |-- texinfo-4.13a-x86_64-4.txz.asc

-|   |   |-- vbetool-1.1-x86_64-1.txt

-|   |   |-- vbetool-1.1-x86_64-1.txz

-|   |   |-- vbetool-1.1-x86_64-1.txz.asc

-|   |   |-- vim-7.3.154-x86_64-1.txt

-|   |   |-- vim-7.3.154-x86_64-1.txz

-|   |   |-- vim-7.3.154-x86_64-1.txz.asc

-|   |   |-- vorbis-tools-1.4.0-x86_64-1.txt

-|   |   |-- vorbis-tools-1.4.0-x86_64-1.txz

-|   |   |-- vorbis-tools-1.4.0-x86_64-1.txz.asc

-|   |   |-- workbone-2.40-x86_64-4.txt

-|   |   |-- workbone-2.40-x86_64-4.txz

-|   |   |-- workbone-2.40-x86_64-4.txz.asc

-|   |   |-- xfsdump-3.0.4-x86_64-1.txt

-|   |   |-- xfsdump-3.0.4-x86_64-1.txz

-|   |   |-- xfsdump-3.0.4-x86_64-1.txz.asc

-|   |   |-- zsh-4.3.11-x86_64-1.txt

-|   |   |-- zsh-4.3.11-x86_64-1.txz

-|   |   `-- zsh-4.3.11-x86_64-1.txz.asc

-|   |-- d

-|   |   |-- autoconf-2.68-noarch-1.txt

-|   |   |-- autoconf-2.68-noarch-1.txz

-|   |   |-- autoconf-2.68-noarch-1.txz.asc

-|   |   |-- automake-1.11.1-noarch-2.txt

-|   |   |-- automake-1.11.1-noarch-2.txz

-|   |   |-- automake-1.11.1-noarch-2.txz.asc

-|   |   |-- binutils-2.21.51.0.6-x86_64-1.txt

-|   |   |-- binutils-2.21.51.0.6-x86_64-1.txz

-|   |   |-- binutils-2.21.51.0.6-x86_64-1.txz.asc

-|   |   |-- bison-2.4.3-x86_64-2.txt

-|   |   |-- bison-2.4.3-x86_64-2.txz

-|   |   |-- bison-2.4.3-x86_64-2.txz.asc

-|   |   |-- ccache-3.1.4-x86_64-1.txt

-|   |   |-- ccache-3.1.4-x86_64-1.txz

-|   |   |-- ccache-3.1.4-x86_64-1.txz.asc

-|   |   |-- clisp-2.49-x86_64-1.txt

-|   |   |-- clisp-2.49-x86_64-1.txz

-|   |   |-- clisp-2.49-x86_64-1.txz.asc

-|   |   |-- cmake-2.8.4-x86_64-1.txt

-|   |   |-- cmake-2.8.4-x86_64-1.txz

-|   |   |-- cmake-2.8.4-x86_64-1.txz.asc

-|   |   |-- cscope-15.7a-x86_64-1.txt

-|   |   |-- cscope-15.7a-x86_64-1.txz

-|   |   |-- cscope-15.7a-x86_64-1.txz.asc

-|   |   |-- cvs-1.11.23-x86_64-1.txt

-|   |   |-- cvs-1.11.23-x86_64-1.txz

-|   |   |-- cvs-1.11.23-x86_64-1.txz.asc

-|   |   |-- dev86-0.16.17-x86_64-2.txt

-|   |   |-- dev86-0.16.17-x86_64-2.txz

-|   |   |-- dev86-0.16.17-x86_64-2.txz.asc

-|   |   |-- distcc-2.18.3-x86_64-2.txt

-|   |   |-- distcc-2.18.3-x86_64-2.txz

-|   |   |-- distcc-2.18.3-x86_64-2.txz.asc

-|   |   |-- doxygen-1.7.3-x86_64-1.txt

-|   |   |-- doxygen-1.7.3-x86_64-1.txz

-|   |   |-- doxygen-1.7.3-x86_64-1.txz.asc

-|   |   |-- flex-2.5.35-x86_64-1.txt

-|   |   |-- flex-2.5.35-x86_64-1.txz

-|   |   |-- flex-2.5.35-x86_64-1.txz.asc

-|   |   |-- gcc-4.5.2-x86_64-2.txt

-|   |   |-- gcc-4.5.2-x86_64-2.txz

-|   |   |-- gcc-4.5.2-x86_64-2.txz.asc

-|   |   |-- gcc-g++-4.5.2-x86_64-2.txt

-|   |   |-- gcc-g++-4.5.2-x86_64-2.txz

-|   |   |-- gcc-g++-4.5.2-x86_64-2.txz.asc

-|   |   |-- gcc-gfortran-4.5.2-x86_64-2.txt

-|   |   |-- gcc-gfortran-4.5.2-x86_64-2.txz

-|   |   |-- gcc-gfortran-4.5.2-x86_64-2.txz.asc

-|   |   |-- gcc-gnat-4.5.2-x86_64-2.txt

-|   |   |-- gcc-gnat-4.5.2-x86_64-2.txz

-|   |   |-- gcc-gnat-4.5.2-x86_64-2.txz.asc

-|   |   |-- gcc-java-4.5.2-x86_64-2.txt

-|   |   |-- gcc-java-4.5.2-x86_64-2.txz

-|   |   |-- gcc-java-4.5.2-x86_64-2.txz.asc

-|   |   |-- gcc-objc-4.5.2-x86_64-2.txt

-|   |   |-- gcc-objc-4.5.2-x86_64-2.txz

-|   |   |-- gcc-objc-4.5.2-x86_64-2.txz.asc

-|   |   |-- gdb-7.2-x86_64-2.txt

-|   |   |-- gdb-7.2-x86_64-2.txz

-|   |   |-- gdb-7.2-x86_64-2.txz.asc

-|   |   |-- gettext-tools-0.18.1.1-x86_64-1.txt

-|   |   |-- gettext-tools-0.18.1.1-x86_64-1.txz

-|   |   |-- gettext-tools-0.18.1.1-x86_64-1.txz.asc

-|   |   |-- git-1.7.4.4-x86_64-1.txt

-|   |   |-- git-1.7.4.4-x86_64-1.txz

-|   |   |-- git-1.7.4.4-x86_64-1.txz.asc

-|   |   |-- gperf-3.0.4-x86_64-1.txt

-|   |   |-- gperf-3.0.4-x86_64-1.txz

-|   |   |-- gperf-3.0.4-x86_64-1.txz.asc

-|   |   |-- guile-1.8.8-x86_64-1.txt

-|   |   |-- guile-1.8.8-x86_64-1.txz

-|   |   |-- guile-1.8.8-x86_64-1.txz.asc

-|   |   |-- indent-2.2.10-x86_64-1.txt

-|   |   |-- indent-2.2.10-x86_64-1.txz

-|   |   |-- indent-2.2.10-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- intltool-0.41.1-x86_64-1.txt

-|   |   |-- intltool-0.41.1-x86_64-1.txz

-|   |   |-- intltool-0.41.1-x86_64-1.txz.asc

-|   |   |-- kernel-headers-2.6.37.6-x86-2.txt

-|   |   |-- kernel-headers-2.6.37.6-x86-2.txz

-|   |   |-- kernel-headers-2.6.37.6-x86-2.txz.asc

-|   |   |-- libtool-2.4-x86_64-1.txt

-|   |   |-- libtool-2.4-x86_64-1.txz

-|   |   |-- libtool-2.4-x86_64-1.txz.asc

-|   |   |-- m4-1.4.16-x86_64-1.txt

-|   |   |-- m4-1.4.16-x86_64-1.txz

-|   |   |-- m4-1.4.16-x86_64-1.txz.asc

-|   |   |-- make-3.82-x86_64-2.txt

-|   |   |-- make-3.82-x86_64-2.txz

-|   |   |-- make-3.82-x86_64-2.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mercurial-1.8.2-x86_64-1.txt

-|   |   |-- mercurial-1.8.2-x86_64-1.txz

-|   |   |-- mercurial-1.8.2-x86_64-1.txz.asc

-|   |   |-- nasm-2.09.04-x86_64-1.txt

-|   |   |-- nasm-2.09.04-x86_64-1.txz

-|   |   |-- nasm-2.09.04-x86_64-1.txz.asc

-|   |   |-- oprofile-0.9.6-x86_64-5.txt

-|   |   |-- oprofile-0.9.6-x86_64-5.txz

-|   |   |-- oprofile-0.9.6-x86_64-5.txz.asc

-|   |   |-- p2c-1.21alpha2-x86_64-3.txt

-|   |   |-- p2c-1.21alpha2-x86_64-3.txz

-|   |   |-- p2c-1.21alpha2-x86_64-3.txz.asc

-|   |   |-- perl-5.12.3-x86_64-1.txt

-|   |   |-- perl-5.12.3-x86_64-1.txz

-|   |   |-- perl-5.12.3-x86_64-1.txz.asc

-|   |   |-- pkg-config-0.25-x86_64-1.txt

-|   |   |-- pkg-config-0.25-x86_64-1.txz

-|   |   |-- pkg-config-0.25-x86_64-1.txz.asc

-|   |   |-- pmake-1.111-x86_64-3.txt

-|   |   |-- pmake-1.111-x86_64-3.txz

-|   |   |-- pmake-1.111-x86_64-3.txz.asc

-|   |   |-- python-2.6.6-x86_64-1.txt

-|   |   |-- python-2.6.6-x86_64-1.txz

-|   |   |-- python-2.6.6-x86_64-1.txz.asc

-|   |   |-- rcs-5.7-x86_64-2.txt

-|   |   |-- rcs-5.7-x86_64-2.txz

-|   |   |-- rcs-5.7-x86_64-2.txz.asc

-|   |   |-- ruby-1.9.1_p431-x86_64-1.txt

-|   |   |-- ruby-1.9.1_p431-x86_64-1.txz

-|   |   |-- ruby-1.9.1_p431-x86_64-1.txz.asc

-|   |   |-- slacktrack-2.08-x86_64-1.txt

-|   |   |-- slacktrack-2.08-x86_64-1.txz

-|   |   |-- slacktrack-2.08-x86_64-1.txz.asc

-|   |   |-- strace-4.5.20-x86_64-1.txt

-|   |   |-- strace-4.5.20-x86_64-1.txz

-|   |   |-- strace-4.5.20-x86_64-1.txz.asc

-|   |   |-- subversion-1.6.16-x86_64-1.txt

-|   |   |-- subversion-1.6.16-x86_64-1.txz

-|   |   |-- subversion-1.6.16-x86_64-1.txz.asc

-|   |   |-- swig-1.3.38-x86_64-2.txt

-|   |   |-- swig-1.3.38-x86_64-2.txz

-|   |   |-- swig-1.3.38-x86_64-2.txz.asc

-|   |   |-- tagfile

-|   |   |-- yasm-1.1.0-x86_64-1.txt

-|   |   |-- yasm-1.1.0-x86_64-1.txz

-|   |   `-- yasm-1.1.0-x86_64-1.txz.asc

-|   |-- e

-|   |   |-- emacs-23.3-x86_64-1.txt

-|   |   |-- emacs-23.3-x86_64-1.txz

-|   |   |-- emacs-23.3-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   `-- tagfile

-|   |-- f

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- linux-faqs-20060228-noarch-1.txt

-|   |   |-- linux-faqs-20060228-noarch-1.txz

-|   |   |-- linux-faqs-20060228-noarch-1.txz.asc

-|   |   |-- linux-howtos-20110210-noarch-1.txt

-|   |   |-- linux-howtos-20110210-noarch-1.txz

-|   |   |-- linux-howtos-20110210-noarch-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   `-- tagfile

-|   |-- k

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- kernel-source-2.6.37.6-noarch-2.txt

-|   |   |-- kernel-source-2.6.37.6-noarch-2.txz

-|   |   |-- kernel-source-2.6.37.6-noarch-2.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   `-- tagfile

-|   |-- kde

-|   |   |-- amarok-2.4.0-x86_64-1.txt

-|   |   |-- amarok-2.4.0-x86_64-1.txz

-|   |   |-- amarok-2.4.0-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- k3b-2.0.2-x86_64-2.txt

-|   |   |-- k3b-2.0.2-x86_64-2.txz

-|   |   |-- k3b-2.0.2-x86_64-2.txz.asc

-|   |   |-- kaudiocreator-r1212483-x86_64-1.txt

-|   |   |-- kaudiocreator-r1212483-x86_64-1.txz

-|   |   |-- kaudiocreator-r1212483-x86_64-1.txz.asc

-|   |   |-- kdeaccessibility-4.5.5-x86_64-1.txt

-|   |   |-- kdeaccessibility-4.5.5-x86_64-1.txz

-|   |   |-- kdeaccessibility-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdeadmin-4.5.5-x86_64-2.txt

-|   |   |-- kdeadmin-4.5.5-x86_64-2.txz

-|   |   |-- kdeadmin-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdeartwork-4.5.5-x86_64-2.txt

-|   |   |-- kdeartwork-4.5.5-x86_64-2.txz

-|   |   |-- kdeartwork-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdebase-4.5.5-x86_64-3.txt

-|   |   |-- kdebase-4.5.5-x86_64-3.txz

-|   |   |-- kdebase-4.5.5-x86_64-3.txz.asc

-|   |   |-- kdebase-runtime-4.5.5-x86_64-2.txt

-|   |   |-- kdebase-runtime-4.5.5-x86_64-2.txz

-|   |   |-- kdebase-runtime-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdebase-workspace-4.5.5-x86_64-1.txt

-|   |   |-- kdebase-workspace-4.5.5-x86_64-1.txz

-|   |   |-- kdebase-workspace-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdebindings-4.5.5-x86_64-2.txt

-|   |   |-- kdebindings-4.5.5-x86_64-2.txz

-|   |   |-- kdebindings-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdeedu-4.5.5-x86_64-1.txt

-|   |   |-- kdeedu-4.5.5-x86_64-1.txz

-|   |   |-- kdeedu-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdegames-4.5.5-x86_64-1.txt

-|   |   |-- kdegames-4.5.5-x86_64-1.txz

-|   |   |-- kdegames-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdegraphics-4.5.5-x86_64-3.txt

-|   |   |-- kdegraphics-4.5.5-x86_64-3.txz

-|   |   |-- kdegraphics-4.5.5-x86_64-3.txz.asc

-|   |   |-- kdelibs-4.5.5-x86_64-2.txt

-|   |   |-- kdelibs-4.5.5-x86_64-2.txz

-|   |   |-- kdelibs-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdemultimedia-4.5.5-x86_64-1.txt

-|   |   |-- kdemultimedia-4.5.5-x86_64-1.txz

-|   |   |-- kdemultimedia-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdenetwork-4.5.5-x86_64-1.txt

-|   |   |-- kdenetwork-4.5.5-x86_64-1.txz

-|   |   |-- kdenetwork-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdepim-4.4.10-x86_64-1.txt

-|   |   |-- kdepim-4.4.10-x86_64-1.txz

-|   |   |-- kdepim-4.4.10-x86_64-1.txz.asc

-|   |   |-- kdepim-runtime-4.4.10-x86_64-1.txt

-|   |   |-- kdepim-runtime-4.4.10-x86_64-1.txz

-|   |   |-- kdepim-runtime-4.4.10-x86_64-1.txz.asc

-|   |   |-- kdepimlibs-4.5.5-x86_64-2.txt

-|   |   |-- kdepimlibs-4.5.5-x86_64-2.txz

-|   |   |-- kdepimlibs-4.5.5-x86_64-2.txz.asc

-|   |   |-- kdeplasma-addons-4.5.5-x86_64-1.txt

-|   |   |-- kdeplasma-addons-4.5.5-x86_64-1.txz

-|   |   |-- kdeplasma-addons-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdesdk-4.5.5-x86_64-1.txt

-|   |   |-- kdesdk-4.5.5-x86_64-1.txz

-|   |   |-- kdesdk-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdetoys-4.5.5-x86_64-1.txt

-|   |   |-- kdetoys-4.5.5-x86_64-1.txz

-|   |   |-- kdetoys-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdeutils-4.5.5-x86_64-1.txt

-|   |   |-- kdeutils-4.5.5-x86_64-1.txz

-|   |   |-- kdeutils-4.5.5-x86_64-1.txz.asc

-|   |   |-- kdevelop-4.2.2-x86_64-1.txt

-|   |   |-- kdevelop-4.2.2-x86_64-1.txz

-|   |   |-- kdevelop-4.2.2-x86_64-1.txz.asc

-|   |   |-- kdevplatform-1.2.2-x86_64-1.txt

-|   |   |-- kdevplatform-1.2.2-x86_64-1.txz

-|   |   |-- kdevplatform-1.2.2-x86_64-1.txz.asc

-|   |   |-- kdewebdev-4.5.5-x86_64-1.txt

-|   |   |-- kdewebdev-4.5.5-x86_64-1.txz

-|   |   |-- kdewebdev-4.5.5-x86_64-1.txz.asc

-|   |   |-- koffice-2.3.3-x86_64-2.txt

-|   |   |-- koffice-2.3.3-x86_64-2.txz

-|   |   |-- koffice-2.3.3-x86_64-2.txz.asc

-|   |   |-- konq-plugins-4.4.0-x86_64-2.txt

-|   |   |-- konq-plugins-4.4.0-x86_64-2.txz

-|   |   |-- konq-plugins-4.4.0-x86_64-2.txz.asc

-|   |   |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txt

-|   |   |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz

-|   |   |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz.asc

-|   |   |-- ktorrent-4.0.5-x86_64-1.txt

-|   |   |-- ktorrent-4.0.5-x86_64-1.txz

-|   |   |-- ktorrent-4.0.5-x86_64-1.txz.asc

-|   |   |-- libktorrent-1.0.5_3-x86_64-1.txt

-|   |   |-- libktorrent-1.0.5_3-x86_64-1.txz

-|   |   |-- libktorrent-1.0.5_3-x86_64-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- oxygen-icons-4.5.5-x86_64-1.txt

-|   |   |-- oxygen-icons-4.5.5-x86_64-1.txz

-|   |   |-- oxygen-icons-4.5.5-x86_64-1.txz.asc

-|   |   |-- polkit-kde-1-r1145544-x86_64-2.txt

-|   |   |-- polkit-kde-1-r1145544-x86_64-2.txz

-|   |   |-- polkit-kde-1-r1145544-x86_64-2.txz.asc

-|   |   |-- polkit-qt-1-r1145513-x86_64-2.txt

-|   |   |-- polkit-qt-1-r1145513-x86_64-2.txz

-|   |   |-- polkit-qt-1-r1145513-x86_64-2.txz.asc

-|   |   |-- skanlite-0.7-x86_64-1.txt

-|   |   |-- skanlite-0.7-x86_64-1.txz

-|   |   |-- skanlite-0.7-x86_64-1.txz.asc

-|   |   `-- tagfile

-|   |-- kdei

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- kde-l10n-ar-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ar-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ar-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-bg-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-bg-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-bg-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ca-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ca-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ca-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ca@valencia-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ca@valencia-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ca@valencia-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-cs-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-cs-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-cs-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-da-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-da-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-da-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-de-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-de-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-de-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-el-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-el-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-el-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-en_GB-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-en_GB-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-en_GB-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-eo-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-eo-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-eo-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-es-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-es-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-es-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-et-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-et-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-et-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-eu-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-eu-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-eu-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-fi-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-fi-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-fi-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-fr-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-fr-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-fr-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-fy-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-fy-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-fy-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ga-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ga-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ga-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-gl-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-gl-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-gl-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-gu-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-gu-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-gu-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-he-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-he-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-he-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-hi-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-hi-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-hi-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-hr-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-hr-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-hr-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-hu-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-hu-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-hu-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ia-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ia-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ia-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-id-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-id-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-id-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-is-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-is-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-is-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-it-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-it-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-it-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ja-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ja-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ja-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-kk-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-kk-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-kk-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-km-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-km-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-km-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-kn-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-kn-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-kn-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ko-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ko-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ko-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-lt-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-lt-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-lt-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-lv-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-lv-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-lv-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ml-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ml-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ml-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-nb-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-nb-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-nb-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-nds-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-nds-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-nds-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-nl-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-nl-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-nl-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-nn-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-nn-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-nn-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-pa-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-pa-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-pa-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-pl-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-pl-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-pl-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-pt-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-pt-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-pt-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-pt_BR-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-pt_BR-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-pt_BR-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ro-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ro-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ro-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-ru-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-ru-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-ru-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-sk-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-sk-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-sk-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-sl-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-sl-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-sl-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-sr-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-sr-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-sr-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-sv-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-sv-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-sv-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-th-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-th-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-th-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-tr-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-tr-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-tr-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-uk-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-uk-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-uk-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-wa-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-wa-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-wa-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-zh_CN-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-zh_CN-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-zh_CN-4.5.5-noarch-3.txz.asc

-|   |   |-- kde-l10n-zh_TW-4.5.5-noarch-3.txt

-|   |   |-- kde-l10n-zh_TW-4.5.5-noarch-3.txz

-|   |   |-- kde-l10n-zh_TW-4.5.5-noarch-3.txz.asc

-|   |   |-- koffice-l10n-ca-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-ca-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-ca-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-ca@valencia-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-ca@valencia-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-ca@valencia-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-da-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-da-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-da-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-de-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-de-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-de-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-el-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-el-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-el-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-en_GB-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-en_GB-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-en_GB-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-es-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-es-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-es-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-et-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-et-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-et-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-fr-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-fr-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-fr-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-gl-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-gl-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-gl-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-hu-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-hu-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-hu-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-it-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-it-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-it-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-ja-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-ja-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-ja-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-kk-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-kk-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-kk-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-nb-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-nb-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-nb-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-nds-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-nds-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-nds-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-nl-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-nl-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-nl-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-pl-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-pl-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-pl-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-pt-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-pt-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-pt-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-pt_BR-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-pt_BR-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-pt_BR-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-ru-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-ru-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-ru-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-sv-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-sv-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-sv-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-tr-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-tr-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-tr-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-uk-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-uk-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-uk-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-wa-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-wa-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-wa-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-zh_CN-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-zh_CN-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-zh_CN-2.3.2-noarch-1.txz.asc

-|   |   |-- koffice-l10n-zh_TW-2.3.2-noarch-1.txt

-|   |   |-- koffice-l10n-zh_TW-2.3.2-noarch-1.txz

-|   |   |-- koffice-l10n-zh_TW-2.3.2-noarch-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   `-- tagfile

-|   |-- l

-|   |   |-- ConsoleKit-0.4.3-x86_64-1.txt

-|   |   |-- ConsoleKit-0.4.3-x86_64-1.txz

-|   |   |-- ConsoleKit-0.4.3-x86_64-1.txz.asc

-|   |   |-- M2Crypto-0.20.2-x86_64-1.txt

-|   |   |-- M2Crypto-0.20.2-x86_64-1.txz

-|   |   |-- M2Crypto-0.20.2-x86_64-1.txz.asc

-|   |   |-- PyQt-4.8.1-x86_64-1.txt

-|   |   |-- PyQt-4.8.1-x86_64-1.txz

-|   |   |-- PyQt-4.8.1-x86_64-1.txz.asc

-|   |   |-- QScintilla-2.4.5-x86_64-2.txt

-|   |   |-- QScintilla-2.4.5-x86_64-2.txz

-|   |   |-- QScintilla-2.4.5-x86_64-2.txz.asc

-|   |   |-- aalib-1.4rc5-x86_64-3.txt

-|   |   |-- aalib-1.4rc5-x86_64-3.txz

-|   |   |-- aalib-1.4rc5-x86_64-3.txz.asc

-|   |   |-- akonadi-1.4.1-x86_64-3.txt

-|   |   |-- akonadi-1.4.1-x86_64-3.txz

-|   |   |-- akonadi-1.4.1-x86_64-3.txz.asc

-|   |   |-- alsa-lib-1.0.24.1-x86_64-1.txt

-|   |   |-- alsa-lib-1.0.24.1-x86_64-1.txz

-|   |   |-- alsa-lib-1.0.24.1-x86_64-1.txz.asc

-|   |   |-- alsa-oss-1.0.17-x86_64-1.txt

-|   |   |-- alsa-oss-1.0.17-x86_64-1.txz

-|   |   |-- alsa-oss-1.0.17-x86_64-1.txz.asc

-|   |   |-- apr-1.4.2-x86_64-2.txt

-|   |   |-- apr-1.4.2-x86_64-2.txz

-|   |   |-- apr-1.4.2-x86_64-2.txz.asc

-|   |   |-- apr-util-1.3.10-x86_64-1.txt

-|   |   |-- apr-util-1.3.10-x86_64-1.txz

-|   |   |-- apr-util-1.3.10-x86_64-1.txz.asc

-|   |   |-- aspell-0.60.6-x86_64-1.txt

-|   |   |-- aspell-0.60.6-x86_64-1.txz

-|   |   |-- aspell-0.60.6-x86_64-1.txz.asc

-|   |   |-- aspell-en-6.0_0-noarch-4.txt

-|   |   |-- aspell-en-6.0_0-noarch-4.txz

-|   |   |-- aspell-en-6.0_0-noarch-4.txz.asc

-|   |   |-- atk-1.32.0-x86_64-1.txt

-|   |   |-- atk-1.32.0-x86_64-1.txz

-|   |   |-- atk-1.32.0-x86_64-1.txz.asc

-|   |   |-- attica-0.1.4-x86_64-1.txt

-|   |   |-- attica-0.1.4-x86_64-1.txz

-|   |   |-- attica-0.1.4-x86_64-1.txz.asc

-|   |   |-- audiofile-0.2.7-x86_64-1.txt

-|   |   |-- audiofile-0.2.7-x86_64-1.txz

-|   |   |-- audiofile-0.2.7-x86_64-1.txz.asc

-|   |   |-- automoc4-0.9.88-x86_64-1.txt

-|   |   |-- automoc4-0.9.88-x86_64-1.txz

-|   |   |-- automoc4-0.9.88-x86_64-1.txz.asc

-|   |   |-- babl-0.1.2-x86_64-1.txt

-|   |   |-- babl-0.1.2-x86_64-1.txz

-|   |   |-- babl-0.1.2-x86_64-1.txz.asc

-|   |   |-- boost-1.45.0-x86_64-1.txt

-|   |   |-- boost-1.45.0-x86_64-1.txz

-|   |   |-- boost-1.45.0-x86_64-1.txz.asc

-|   |   |-- cairo-1.10.2-x86_64-2.txt

-|   |   |-- cairo-1.10.2-x86_64-2.txz

-|   |   |-- cairo-1.10.2-x86_64-2.txz.asc

-|   |   |-- chmlib-0.40-x86_64-2.txt

-|   |   |-- chmlib-0.40-x86_64-2.txz

-|   |   |-- chmlib-0.40-x86_64-2.txz.asc

-|   |   |-- clucene-0.9.21b-x86_64-1.txt

-|   |   |-- clucene-0.9.21b-x86_64-1.txz

-|   |   |-- clucene-0.9.21b-x86_64-1.txz.asc

-|   |   |-- db42-4.2.52-x86_64-3.txt

-|   |   |-- db42-4.2.52-x86_64-3.txz

-|   |   |-- db42-4.2.52-x86_64-3.txz.asc

-|   |   |-- db44-4.4.20-x86_64-2.txt

-|   |   |-- db44-4.4.20-x86_64-2.txz

-|   |   |-- db44-4.4.20-x86_64-2.txz.asc

-|   |   |-- dbus-glib-0.88-x86_64-1.txt

-|   |   |-- dbus-glib-0.88-x86_64-1.txz

-|   |   |-- dbus-glib-0.88-x86_64-1.txz.asc

-|   |   |-- dbus-python-0.83.1-x86_64-1.txt

-|   |   |-- dbus-python-0.83.1-x86_64-1.txz

-|   |   |-- dbus-python-0.83.1-x86_64-1.txz.asc

-|   |   |-- desktop-file-utils-0.16-x86_64-2.txt

-|   |   |-- desktop-file-utils-0.16-x86_64-2.txz

-|   |   |-- desktop-file-utils-0.16-x86_64-2.txz.asc

-|   |   |-- djvulibre-3.5.24-x86_64-1.txt

-|   |   |-- djvulibre-3.5.24-x86_64-1.txz

-|   |   |-- djvulibre-3.5.24-x86_64-1.txz.asc

-|   |   |-- ebook-tools-0.1.1-x86_64-2.txt

-|   |   |-- ebook-tools-0.1.1-x86_64-2.txz

-|   |   |-- ebook-tools-0.1.1-x86_64-2.txz.asc

-|   |   |-- eigen2-2.0.10-x86_64-1.txt

-|   |   |-- eigen2-2.0.10-x86_64-1.txz

-|   |   |-- eigen2-2.0.10-x86_64-1.txz.asc

-|   |   |-- enchant-1.5.0-x86_64-1.txt

-|   |   |-- enchant-1.5.0-x86_64-1.txz

-|   |   |-- enchant-1.5.0-x86_64-1.txz.asc

-|   |   |-- esound-0.2.41-x86_64-1.txt

-|   |   |-- esound-0.2.41-x86_64-1.txz

-|   |   |-- esound-0.2.41-x86_64-1.txz.asc

-|   |   |-- exiv2-0.21.1-x86_64-1.txt

-|   |   |-- exiv2-0.21.1-x86_64-1.txz

-|   |   |-- exiv2-0.21.1-x86_64-1.txz.asc

-|   |   |-- expat-2.0.1-x86_64-2.txt

-|   |   |-- expat-2.0.1-x86_64-2.txz

-|   |   |-- expat-2.0.1-x86_64-2.txz.asc

-|   |   |-- fftw-3.2.2-x86_64-1.txt

-|   |   |-- fftw-3.2.2-x86_64-1.txz

-|   |   |-- fftw-3.2.2-x86_64-1.txz.asc

-|   |   |-- freetype-2.4.4-x86_64-1.txt

-|   |   |-- freetype-2.4.4-x86_64-1.txz

-|   |   |-- freetype-2.4.4-x86_64-1.txz.asc

-|   |   |-- fribidi-0.10.9-x86_64-2.txt

-|   |   |-- fribidi-0.10.9-x86_64-2.txz

-|   |   |-- fribidi-0.10.9-x86_64-2.txz.asc

-|   |   |-- fuse-2.8.5-x86_64-1.txt

-|   |   |-- fuse-2.8.5-x86_64-1.txz

-|   |   |-- fuse-2.8.5-x86_64-1.txz.asc

-|   |   |-- gamin-0.1.10-x86_64-3.txt

-|   |   |-- gamin-0.1.10-x86_64-3.txz

-|   |   |-- gamin-0.1.10-x86_64-3.txz.asc

-|   |   |-- gd-2.0.35-x86_64-4.txt

-|   |   |-- gd-2.0.35-x86_64-4.txz

-|   |   |-- gd-2.0.35-x86_64-4.txz.asc

-|   |   |-- gdbm-1.8.3-x86_64-4.txt

-|   |   |-- gdbm-1.8.3-x86_64-4.txz

-|   |   |-- gdbm-1.8.3-x86_64-4.txz.asc

-|   |   |-- gdk-pixbuf2-2.23.3-x86_64-1.txt

-|   |   |-- gdk-pixbuf2-2.23.3-x86_64-1.txz

-|   |   |-- gdk-pixbuf2-2.23.3-x86_64-1.txz.asc

-|   |   |-- gegl-0.1.2-x86_64-1.txt

-|   |   |-- gegl-0.1.2-x86_64-1.txz

-|   |   |-- gegl-0.1.2-x86_64-1.txz.asc

-|   |   |-- giflib-4.1.6-x86_64-1.txt

-|   |   |-- giflib-4.1.6-x86_64-1.txz

-|   |   |-- giflib-4.1.6-x86_64-1.txz.asc

-|   |   |-- glib-1.2.10-x86_64-3.txt

-|   |   |-- glib-1.2.10-x86_64-3.txz

-|   |   |-- glib-1.2.10-x86_64-3.txz.asc

-|   |   |-- glib2-2.28.6-x86_64-1.txt

-|   |   |-- glib2-2.28.6-x86_64-1.txz

-|   |   |-- glib2-2.28.6-x86_64-1.txz.asc

-|   |   |-- glibc-2.13-x86_64-4.txt

-|   |   |-- glibc-2.13-x86_64-4.txz

-|   |   |-- glibc-2.13-x86_64-4.txz.asc

-|   |   |-- glibc-i18n-2.13-x86_64-4.txt

-|   |   |-- glibc-i18n-2.13-x86_64-4.txz

-|   |   |-- glibc-i18n-2.13-x86_64-4.txz.asc

-|   |   |-- glibc-profile-2.13-x86_64-4.txt

-|   |   |-- glibc-profile-2.13-x86_64-4.txz

-|   |   |-- glibc-profile-2.13-x86_64-4.txz.asc

-|   |   |-- gmime-2.4.15-x86_64-1.txt

-|   |   |-- gmime-2.4.15-x86_64-1.txz

-|   |   |-- gmime-2.4.15-x86_64-1.txz.asc

-|   |   |-- gmm-3.1-noarch-1.txt

-|   |   |-- gmm-3.1-noarch-1.txz

-|   |   |-- gmm-3.1-noarch-1.txz.asc

-|   |   |-- gmp-5.0.1-x86_64-1.txt

-|   |   |-- gmp-5.0.1-x86_64-1.txz

-|   |   |-- gmp-5.0.1-x86_64-1.txz.asc

-|   |   |-- gnome-icon-theme-2.31.0-x86_64-1.txt

-|   |   |-- gnome-icon-theme-2.31.0-x86_64-1.txz

-|   |   |-- gnome-icon-theme-2.31.0-x86_64-1.txz.asc

-|   |   |-- gst-plugins-base-0.10.32-x86_64-1.txt

-|   |   |-- gst-plugins-base-0.10.32-x86_64-1.txz

-|   |   |-- gst-plugins-base-0.10.32-x86_64-1.txz.asc

-|   |   |-- gst-plugins-good-0.10.28-x86_64-2.txt

-|   |   |-- gst-plugins-good-0.10.28-x86_64-2.txz

-|   |   |-- gst-plugins-good-0.10.28-x86_64-2.txz.asc

-|   |   |-- gstreamer-0.10.32-x86_64-1.txt

-|   |   |-- gstreamer-0.10.32-x86_64-1.txz

-|   |   |-- gstreamer-0.10.32-x86_64-1.txz.asc

-|   |   |-- gtk+-1.2.10-x86_64-5.txt

-|   |   |-- gtk+-1.2.10-x86_64-5.txz

-|   |   |-- gtk+-1.2.10-x86_64-5.txz.asc

-|   |   |-- gtk+2-2.24.4-x86_64-1.txt

-|   |   |-- gtk+2-2.24.4-x86_64-1.txz

-|   |   |-- gtk+2-2.24.4-x86_64-1.txz.asc

-|   |   |-- gtkspell-2.0.16-x86_64-1.txt

-|   |   |-- gtkspell-2.0.16-x86_64-1.txz

-|   |   |-- gtkspell-2.0.16-x86_64-1.txz.asc

-|   |   |-- hal-0.5.14-x86_64-3.txt

-|   |   |-- hal-0.5.14-x86_64-3.txz

-|   |   |-- hal-0.5.14-x86_64-3.txz.asc

-|   |   |-- hal-info-20091130-noarch-1.txt

-|   |   |-- hal-info-20091130-noarch-1.txz

-|   |   |-- hal-info-20091130-noarch-1.txz.asc

-|   |   |-- hicolor-icon-theme-0.12-noarch-1.txt

-|   |   |-- hicolor-icon-theme-0.12-noarch-1.txz

-|   |   |-- hicolor-icon-theme-0.12-noarch-1.txz.asc

-|   |   |-- hunspell-1.2.9-x86_64-1.txt

-|   |   |-- hunspell-1.2.9-x86_64-1.txz

-|   |   |-- hunspell-1.2.9-x86_64-1.txz.asc

-|   |   |-- icon-naming-utils-0.8.90-x86_64-2.txt

-|   |   |-- icon-naming-utils-0.8.90-x86_64-2.txz

-|   |   |-- icon-naming-utils-0.8.90-x86_64-2.txz.asc

-|   |   |-- ilmbase-1.0.2-x86_64-1.txt

-|   |   |-- ilmbase-1.0.2-x86_64-1.txz

-|   |   |-- ilmbase-1.0.2-x86_64-1.txz.asc

-|   |   |-- imlib-1.9.15-x86_64-7.txt

-|   |   |-- imlib-1.9.15-x86_64-7.txz

-|   |   |-- imlib-1.9.15-x86_64-7.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- iso-codes-3.24.2-noarch-1.txt

-|   |   |-- iso-codes-3.24.2-noarch-1.txz

-|   |   |-- iso-codes-3.24.2-noarch-1.txz.asc

-|   |   |-- jasper-1.900.1-x86_64-3.txt

-|   |   |-- jasper-1.900.1-x86_64-3.txz

-|   |   |-- jasper-1.900.1-x86_64-3.txz.asc

-|   |   |-- jre-6u25-x86_64-1.txt

-|   |   |-- jre-6u25-x86_64-1.txz

-|   |   |-- jre-6u25-x86_64-1.txz.asc

-|   |   |-- lcms-1.19-x86_64-1.txt

-|   |   |-- lcms-1.19-x86_64-1.txz

-|   |   |-- lcms-1.19-x86_64-1.txz.asc

-|   |   |-- lesstif-0.95.2-x86_64-1.txt

-|   |   |-- lesstif-0.95.2-x86_64-1.txz

-|   |   |-- lesstif-0.95.2-x86_64-1.txz.asc

-|   |   |-- libaio-0.3.109-x86_64-1.txt

-|   |   |-- libaio-0.3.109-x86_64-1.txz

-|   |   |-- libaio-0.3.109-x86_64-1.txz.asc

-|   |   |-- libao-1.1.0-x86_64-1.txt

-|   |   |-- libao-1.1.0-x86_64-1.txz

-|   |   |-- libao-1.1.0-x86_64-1.txz.asc

-|   |   |-- libarchive-2.8.4-x86_64-1.txt

-|   |   |-- libarchive-2.8.4-x86_64-1.txz

-|   |   |-- libarchive-2.8.4-x86_64-1.txz.asc

-|   |   |-- libart_lgpl-2.3.21-x86_64-1.txt

-|   |   |-- libart_lgpl-2.3.21-x86_64-1.txz

-|   |   |-- libart_lgpl-2.3.21-x86_64-1.txz.asc

-|   |   |-- libcaca-0.99.beta16-x86_64-3.txt

-|   |   |-- libcaca-0.99.beta16-x86_64-3.txz

-|   |   |-- libcaca-0.99.beta16-x86_64-3.txz.asc

-|   |   |-- libcap-2.20-x86_64-1.txt

-|   |   |-- libcap-2.20-x86_64-1.txz

-|   |   |-- libcap-2.20-x86_64-1.txz.asc

-|   |   |-- libcddb-1.3.2-x86_64-1.txt

-|   |   |-- libcddb-1.3.2-x86_64-1.txz

-|   |   |-- libcddb-1.3.2-x86_64-1.txz.asc

-|   |   |-- libcdio-0.79-x86_64-1.txt

-|   |   |-- libcdio-0.79-x86_64-1.txz

-|   |   |-- libcdio-0.79-x86_64-1.txz.asc

-|   |   |-- libdbusmenu-qt-0.6.4-x86_64-1.txt

-|   |   |-- libdbusmenu-qt-0.6.4-x86_64-1.txz

-|   |   |-- libdbusmenu-qt-0.6.4-x86_64-1.txz.asc

-|   |   |-- libdiscid-0.2.2-x86_64-1.txt

-|   |   |-- libdiscid-0.2.2-x86_64-1.txz

-|   |   |-- libdiscid-0.2.2-x86_64-1.txz.asc

-|   |   |-- libdvdread-4.1.3-x86_64-1.txt

-|   |   |-- libdvdread-4.1.3-x86_64-1.txz

-|   |   |-- libdvdread-4.1.3-x86_64-1.txz.asc

-|   |   |-- libelf-0.8.13-x86_64-2.txt

-|   |   |-- libelf-0.8.13-x86_64-2.txz

-|   |   |-- libelf-0.8.13-x86_64-2.txz.asc

-|   |   |-- libexif-0.6.20-x86_64-1.txt

-|   |   |-- libexif-0.6.20-x86_64-1.txz

-|   |   |-- libexif-0.6.20-x86_64-1.txz.asc

-|   |   |-- libglade-2.6.4-x86_64-4.txt

-|   |   |-- libglade-2.6.4-x86_64-4.txz

-|   |   |-- libglade-2.6.4-x86_64-4.txz.asc

-|   |   |-- libgphoto2-2.4.10.1-x86_64-1.txt

-|   |   |-- libgphoto2-2.4.10.1-x86_64-1.txz

-|   |   |-- libgphoto2-2.4.10.1-x86_64-1.txz.asc

-|   |   |-- libgpod-0.8.0-x86_64-2.txt

-|   |   |-- libgpod-0.8.0-x86_64-2.txz

-|   |   |-- libgpod-0.8.0-x86_64-2.txz.asc

-|   |   |-- libgsf-1.14.20-x86_64-1.txt

-|   |   |-- libgsf-1.14.20-x86_64-1.txz

-|   |   |-- libgsf-1.14.20-x86_64-1.txz.asc

-|   |   |-- libical-0.44-x86_64-1.txt

-|   |   |-- libical-0.44-x86_64-1.txz

-|   |   |-- libical-0.44-x86_64-1.txz.asc

-|   |   |-- libid3tag-0.15.1b-x86_64-4.txt

-|   |   |-- libid3tag-0.15.1b-x86_64-4.txz

-|   |   |-- libid3tag-0.15.1b-x86_64-4.txz.asc

-|   |   |-- libidl-0.8.14-x86_64-1.txt

-|   |   |-- libidl-0.8.14-x86_64-1.txz

-|   |   |-- libidl-0.8.14-x86_64-1.txz.asc

-|   |   |-- libidn-1.19-x86_64-1.txt

-|   |   |-- libidn-1.19-x86_64-1.txz

-|   |   |-- libidn-1.19-x86_64-1.txz.asc

-|   |   |-- libieee1284-0.2.11-x86_64-2.txt

-|   |   |-- libieee1284-0.2.11-x86_64-2.txz

-|   |   |-- libieee1284-0.2.11-x86_64-2.txz.asc

-|   |   |-- libiodbc-3.52.7-x86_64-2.txt

-|   |   |-- libiodbc-3.52.7-x86_64-2.txz

-|   |   |-- libiodbc-3.52.7-x86_64-2.txz.asc

-|   |   |-- libjpeg-v8a-x86_64-1.txt

-|   |   |-- libjpeg-v8a-x86_64-1.txz

-|   |   |-- libjpeg-v8a-x86_64-1.txz.asc

-|   |   |-- libkarma-0.1.1-x86_64-2.txt

-|   |   |-- libkarma-0.1.1-x86_64-2.txz

-|   |   |-- libkarma-0.1.1-x86_64-2.txz.asc

-|   |   |-- liblastfm-0.3.3_f0b3239-x86_64-1.txt

-|   |   |-- liblastfm-0.3.3_f0b3239-x86_64-1.txz

-|   |   |-- liblastfm-0.3.3_f0b3239-x86_64-1.txz.asc

-|   |   |-- libmad-0.15.1b-x86_64-3.txt

-|   |   |-- libmad-0.15.1b-x86_64-3.txz

-|   |   |-- libmad-0.15.1b-x86_64-3.txz.asc

-|   |   |-- libmcrypt-2.5.8-x86_64-1.txt

-|   |   |-- libmcrypt-2.5.8-x86_64-1.txz

-|   |   |-- libmcrypt-2.5.8-x86_64-1.txz.asc

-|   |   |-- libmcs-0.7.2-x86_64-1.txt

-|   |   |-- libmcs-0.7.2-x86_64-1.txz

-|   |   |-- libmcs-0.7.2-x86_64-1.txz.asc

-|   |   |-- libmng-1.0.10-x86_64-2.txt

-|   |   |-- libmng-1.0.10-x86_64-2.txz

-|   |   |-- libmng-1.0.10-x86_64-2.txz.asc

-|   |   |-- libmowgli-0.7.1-x86_64-1.txt

-|   |   |-- libmowgli-0.7.1-x86_64-1.txz

-|   |   |-- libmowgli-0.7.1-x86_64-1.txz.asc

-|   |   |-- libmpc-0.8.2-x86_64-2.txt

-|   |   |-- libmpc-0.8.2-x86_64-2.txz

-|   |   |-- libmpc-0.8.2-x86_64-2.txz.asc

-|   |   |-- libmsn-4.1-x86_64-1.txt

-|   |   |-- libmsn-4.1-x86_64-1.txz

-|   |   |-- libmsn-4.1-x86_64-1.txz.asc

-|   |   |-- libmtp-1.0.1-x86_64-2.txt

-|   |   |-- libmtp-1.0.1-x86_64-2.txz

-|   |   |-- libmtp-1.0.1-x86_64-2.txz.asc

-|   |   |-- libnjb-2.2.6-x86_64-5.txt

-|   |   |-- libnjb-2.2.6-x86_64-5.txz

-|   |   |-- libnjb-2.2.6-x86_64-5.txz.asc

-|   |   |-- libnl-1.1-x86_64-1.txt

-|   |   |-- libnl-1.1-x86_64-1.txz

-|   |   |-- libnl-1.1-x86_64-1.txz.asc

-|   |   |-- libnotify-0.5.2-x86_64-1.txt

-|   |   |-- libnotify-0.5.2-x86_64-1.txz

-|   |   |-- libnotify-0.5.2-x86_64-1.txz.asc

-|   |   |-- libogg-1.2.2-x86_64-1.txt

-|   |   |-- libogg-1.2.2-x86_64-1.txz

-|   |   |-- libogg-1.2.2-x86_64-1.txz.asc

-|   |   |-- liboggz-1.1.1-x86_64-1.txt

-|   |   |-- liboggz-1.1.1-x86_64-1.txz

-|   |   |-- liboggz-1.1.1-x86_64-1.txz.asc

-|   |   |-- liboil-0.3.17-x86_64-1.txt

-|   |   |-- liboil-0.3.17-x86_64-1.txz

-|   |   |-- liboil-0.3.17-x86_64-1.txz.asc

-|   |   |-- libpcap-1.1.1-x86_64-1.txt

-|   |   |-- libpcap-1.1.1-x86_64-1.txz

-|   |   |-- libpcap-1.1.1-x86_64-1.txz.asc

-|   |   |-- libplist-1.3-x86_64-1.txt

-|   |   |-- libplist-1.3-x86_64-1.txz

-|   |   |-- libplist-1.3-x86_64-1.txz.asc

-|   |   |-- libpng-1.4.5-x86_64-1.txt

-|   |   |-- libpng-1.4.5-x86_64-1.txz

-|   |   |-- libpng-1.4.5-x86_64-1.txz.asc

-|   |   |-- libraw1394-2.0.7-x86_64-1.txt

-|   |   |-- libraw1394-2.0.7-x86_64-1.txz

-|   |   |-- libraw1394-2.0.7-x86_64-1.txz.asc

-|   |   |-- librsvg-2.32.0-x86_64-1.txt

-|   |   |-- librsvg-2.32.0-x86_64-1.txz

-|   |   |-- librsvg-2.32.0-x86_64-1.txz.asc

-|   |   |-- libsamplerate-0.1.7-x86_64-2.txt

-|   |   |-- libsamplerate-0.1.7-x86_64-2.txz

-|   |   |-- libsamplerate-0.1.7-x86_64-2.txz.asc

-|   |   |-- libsndfile-1.0.24-x86_64-1.txt

-|   |   |-- libsndfile-1.0.24-x86_64-1.txz

-|   |   |-- libsndfile-1.0.24-x86_64-1.txz.asc

-|   |   |-- libspectre-0.2.5-x86_64-2.txt

-|   |   |-- libspectre-0.2.5-x86_64-2.txz

-|   |   |-- libspectre-0.2.5-x86_64-2.txz.asc

-|   |   |-- libtermcap-1.2.3-x86_64-7.txt

-|   |   |-- libtermcap-1.2.3-x86_64-7.txz

-|   |   |-- libtermcap-1.2.3-x86_64-7.txz.asc

-|   |   |-- libtheora-1.1.1-x86_64-1.txt

-|   |   |-- libtheora-1.1.1-x86_64-1.txz

-|   |   |-- libtheora-1.1.1-x86_64-1.txz.asc

-|   |   |-- libtiff-3.9.4-x86_64-2.txt

-|   |   |-- libtiff-3.9.4-x86_64-2.txz

-|   |   |-- libtiff-3.9.4-x86_64-2.txz.asc

-|   |   |-- libusb-1.0.8-x86_64-2.txt

-|   |   |-- libusb-1.0.8-x86_64-2.txz

-|   |   |-- libusb-1.0.8-x86_64-2.txz.asc

-|   |   |-- libvisual-0.4.0-x86_64-2.txt

-|   |   |-- libvisual-0.4.0-x86_64-2.txz

-|   |   |-- libvisual-0.4.0-x86_64-2.txz.asc

-|   |   |-- libvisual-plugins-0.4.0-x86_64-2.txt

-|   |   |-- libvisual-plugins-0.4.0-x86_64-2.txz

-|   |   |-- libvisual-plugins-0.4.0-x86_64-2.txz.asc

-|   |   |-- libvncserver-0.9.7-x86_64-2.txt

-|   |   |-- libvncserver-0.9.7-x86_64-2.txz

-|   |   |-- libvncserver-0.9.7-x86_64-2.txz.asc

-|   |   |-- libvorbis-1.3.2-x86_64-1.txt

-|   |   |-- libvorbis-1.3.2-x86_64-1.txz

-|   |   |-- libvorbis-1.3.2-x86_64-1.txz.asc

-|   |   |-- libwmf-0.2.8.4-x86_64-5.txt

-|   |   |-- libwmf-0.2.8.4-x86_64-5.txz

-|   |   |-- libwmf-0.2.8.4-x86_64-5.txz.asc

-|   |   |-- libwmf-docs-0.2.8.4-noarch-5.txt

-|   |   |-- libwmf-docs-0.2.8.4-noarch-5.txz

-|   |   |-- libwmf-docs-0.2.8.4-noarch-5.txz.asc

-|   |   |-- libwnck-2.30.6-x86_64-1.txt

-|   |   |-- libwnck-2.30.6-x86_64-1.txz

-|   |   |-- libwnck-2.30.6-x86_64-1.txz.asc

-|   |   |-- libwpd-0.8.14-x86_64-1.txt

-|   |   |-- libwpd-0.8.14-x86_64-1.txz

-|   |   |-- libwpd-0.8.14-x86_64-1.txz.asc

-|   |   |-- libxklavier-5.1-x86_64-1.txt

-|   |   |-- libxklavier-5.1-x86_64-1.txz

-|   |   |-- libxklavier-5.1-x86_64-1.txz.asc

-|   |   |-- libxml2-2.7.8-x86_64-3.txt

-|   |   |-- libxml2-2.7.8-x86_64-3.txz

-|   |   |-- libxml2-2.7.8-x86_64-3.txz.asc

-|   |   |-- libxslt-1.1.26-x86_64-1.txt

-|   |   |-- libxslt-1.1.26-x86_64-1.txz

-|   |   |-- libxslt-1.1.26-x86_64-1.txz.asc

-|   |   |-- libzip-0.9.3-x86_64-1.txt

-|   |   |-- libzip-0.9.3-x86_64-1.txz

-|   |   |-- libzip-0.9.3-x86_64-1.txz.asc

-|   |   |-- loudmouth-1.4.3-x86_64-1.txt

-|   |   |-- loudmouth-1.4.3-x86_64-1.txz

-|   |   |-- loudmouth-1.4.3-x86_64-1.txz.asc

-|   |   |-- lzo-2.03-x86_64-1.txt

-|   |   |-- lzo-2.03-x86_64-1.txz

-|   |   |-- lzo-2.03-x86_64-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mhash-0.9.9.9-x86_64-3.txt

-|   |   |-- mhash-0.9.9.9-x86_64-3.txz

-|   |   |-- mhash-0.9.9.9-x86_64-3.txz.asc

-|   |   |-- mm-1.4.2-x86_64-2.txt

-|   |   |-- mm-1.4.2-x86_64-2.txz

-|   |   |-- mm-1.4.2-x86_64-2.txz.asc

-|   |   |-- mpfr-3.0.1-x86_64-1.txt

-|   |   |-- mpfr-3.0.1-x86_64-1.txz

-|   |   |-- mpfr-3.0.1-x86_64-1.txz.asc

-|   |   |-- ncurses-5.9-x86_64-1.txt

-|   |   |-- ncurses-5.9-x86_64-1.txz

-|   |   |-- ncurses-5.9-x86_64-1.txz.asc

-|   |   |-- neon-0.29.5-x86_64-1.txt

-|   |   |-- neon-0.29.5-x86_64-1.txz

-|   |   |-- neon-0.29.5-x86_64-1.txz.asc

-|   |   |-- netpbm-10.49.02-x86_64-1.txt

-|   |   |-- netpbm-10.49.02-x86_64-1.txz

-|   |   |-- netpbm-10.49.02-x86_64-1.txz.asc

-|   |   |-- notify-python-0.1.1-x86_64-1.txt

-|   |   |-- notify-python-0.1.1-x86_64-1.txz

-|   |   |-- notify-python-0.1.1-x86_64-1.txz.asc

-|   |   |-- openexr-1.7.0-x86_64-1.txt

-|   |   |-- openexr-1.7.0-x86_64-1.txz

-|   |   |-- openexr-1.7.0-x86_64-1.txz.asc

-|   |   |-- pango-1.28.4-x86_64-1.txt

-|   |   |-- pango-1.28.4-x86_64-1.txz

-|   |   |-- pango-1.28.4-x86_64-1.txz.asc

-|   |   |-- parted-2.3-x86_64-1.txt

-|   |   |-- parted-2.3-x86_64-1.txz

-|   |   |-- parted-2.3-x86_64-1.txz.asc

-|   |   |-- pcre-8.12-x86_64-1.txt

-|   |   |-- pcre-8.12-x86_64-1.txz

-|   |   |-- pcre-8.12-x86_64-1.txz.asc

-|   |   |-- phonon-4.4.3-x86_64-1.txt

-|   |   |-- phonon-4.4.3-x86_64-1.txz

-|   |   |-- phonon-4.4.3-x86_64-1.txz.asc

-|   |   |-- phonon-mplayer-20101213-x86_64-1.txt

-|   |   |-- phonon-mplayer-20101213-x86_64-1.txz

-|   |   |-- phonon-mplayer-20101213-x86_64-1.txz.asc

-|   |   |-- pil-1.1.7-x86_64-1.txt

-|   |   |-- pil-1.1.7-x86_64-1.txz

-|   |   |-- pil-1.1.7-x86_64-1.txz.asc

-|   |   |-- pilot-link-0.12.5-x86_64-3.txt

-|   |   |-- pilot-link-0.12.5-x86_64-3.txz

-|   |   |-- pilot-link-0.12.5-x86_64-3.txz.asc

-|   |   |-- polkit-0.101-x86_64-2.txt

-|   |   |-- polkit-0.101-x86_64-2.txz

-|   |   |-- polkit-0.101-x86_64-2.txz.asc

-|   |   |-- polkit-gnome-0.101-x86_64-1.txt

-|   |   |-- polkit-gnome-0.101-x86_64-1.txz

-|   |   |-- polkit-gnome-0.101-x86_64-1.txz.asc

-|   |   |-- poppler-0.16.4-x86_64-1.txt

-|   |   |-- poppler-0.16.4-x86_64-1.txz

-|   |   |-- poppler-0.16.4-x86_64-1.txz.asc

-|   |   |-- poppler-data-0.4.4-noarch-1.txt

-|   |   |-- poppler-data-0.4.4-noarch-1.txz

-|   |   |-- poppler-data-0.4.4-noarch-1.txz.asc

-|   |   |-- popt-1.7-x86_64-3.txt

-|   |   |-- popt-1.7-x86_64-3.txz

-|   |   |-- popt-1.7-x86_64-3.txz.asc

-|   |   |-- pycairo-1.8.10-x86_64-1.txt

-|   |   |-- pycairo-1.8.10-x86_64-1.txz

-|   |   |-- pycairo-1.8.10-x86_64-1.txz.asc

-|   |   |-- pycups-1.9.55-x86_64-1.txt

-|   |   |-- pycups-1.9.55-x86_64-1.txz

-|   |   |-- pycups-1.9.55-x86_64-1.txz.asc

-|   |   |-- pygobject-2.26.0-x86_64-1.txt

-|   |   |-- pygobject-2.26.0-x86_64-1.txz

-|   |   |-- pygobject-2.26.0-x86_64-1.txz.asc

-|   |   |-- pygtk-2.22.0-x86_64-1.txt

-|   |   |-- pygtk-2.22.0-x86_64-1.txz

-|   |   |-- pygtk-2.22.0-x86_64-1.txz.asc

-|   |   |-- pyrex-0.9.9-x86_64-1.txt

-|   |   |-- pyrex-0.9.9-x86_64-1.txz

-|   |   |-- pyrex-0.9.9-x86_64-1.txz.asc

-|   |   |-- qca-2.0.2-x86_64-1.txt

-|   |   |-- qca-2.0.2-x86_64-1.txz

-|   |   |-- qca-2.0.2-x86_64-1.txz.asc

-|   |   |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txt

-|   |   |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz

-|   |   |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz.asc

-|   |   |-- qca-gnupg-2.0.0_beta3-x86_64-1.txt

-|   |   |-- qca-gnupg-2.0.0_beta3-x86_64-1.txz

-|   |   |-- qca-gnupg-2.0.0_beta3-x86_64-1.txz.asc

-|   |   |-- qca-ossl-2.0.0_beta3-x86_64-1.txt

-|   |   |-- qca-ossl-2.0.0_beta3-x86_64-1.txz

-|   |   |-- qca-ossl-2.0.0_beta3-x86_64-1.txz.asc

-|   |   |-- qimageblitz-0.0.6-x86_64-1.txt

-|   |   |-- qimageblitz-0.0.6-x86_64-1.txz

-|   |   |-- qimageblitz-0.0.6-x86_64-1.txz.asc

-|   |   |-- qt-4.7.0_7abde40-x86_64-3.txt

-|   |   |-- qt-4.7.0_7abde40-x86_64-3.txz

-|   |   |-- qt-4.7.0_7abde40-x86_64-3.txz.asc

-|   |   |-- qtscriptgenerator-0.1.0-x86_64-2.txt

-|   |   |-- qtscriptgenerator-0.1.0-x86_64-2.txz

-|   |   |-- qtscriptgenerator-0.1.0-x86_64-2.txz.asc

-|   |   |-- raptor-1.4.21-x86_64-1.txt

-|   |   |-- raptor-1.4.21-x86_64-1.txz

-|   |   |-- raptor-1.4.21-x86_64-1.txz.asc

-|   |   |-- rasqal-0.9.21-x86_64-1.txt

-|   |   |-- rasqal-0.9.21-x86_64-1.txz

-|   |   |-- rasqal-0.9.21-x86_64-1.txz.asc

-|   |   |-- readline-5.2-x86_64-4.txt

-|   |   |-- readline-5.2-x86_64-4.txz

-|   |   |-- readline-5.2-x86_64-4.txz.asc

-|   |   |-- redland-1.0.12-x86_64-1.txt

-|   |   |-- redland-1.0.12-x86_64-1.txz

-|   |   |-- redland-1.0.12-x86_64-1.txz.asc

-|   |   |-- sdl-1.2.14-x86_64-5.txt

-|   |   |-- sdl-1.2.14-x86_64-5.txz

-|   |   |-- sdl-1.2.14-x86_64-5.txz.asc

-|   |   |-- seamonkey-solibs-2.1b3-x86_64-2.txt

-|   |   |-- seamonkey-solibs-2.1b3-x86_64-2.txz

-|   |   |-- seamonkey-solibs-2.1b3-x86_64-2.txz.asc

-|   |   |-- shared-desktop-ontologies-0.5-x86_64-1.txt

-|   |   |-- shared-desktop-ontologies-0.5-x86_64-1.txz

-|   |   |-- shared-desktop-ontologies-0.5-x86_64-1.txz.asc

-|   |   |-- shared-mime-info-0.90-x86_64-1.txt

-|   |   |-- shared-mime-info-0.90-x86_64-1.txz

-|   |   |-- shared-mime-info-0.90-x86_64-1.txz.asc

-|   |   |-- sip-4.11.2-x86_64-1.txt

-|   |   |-- sip-4.11.2-x86_64-1.txz

-|   |   |-- sip-4.11.2-x86_64-1.txz.asc

-|   |   |-- slang-2.2.3-x86_64-1.txt

-|   |   |-- slang-2.2.3-x86_64-1.txz

-|   |   |-- slang-2.2.3-x86_64-1.txz.asc

-|   |   |-- slang1-1.4.9-x86_64-1.txt

-|   |   |-- slang1-1.4.9-x86_64-1.txz

-|   |   |-- slang1-1.4.9-x86_64-1.txz.asc

-|   |   |-- soprano-2.5.2-x86_64-2.txt

-|   |   |-- soprano-2.5.2-x86_64-2.txz

-|   |   |-- soprano-2.5.2-x86_64-2.txz.asc

-|   |   |-- startup-notification-0.10-x86_64-1.txt

-|   |   |-- startup-notification-0.10-x86_64-1.txz

-|   |   |-- startup-notification-0.10-x86_64-1.txz.asc

-|   |   |-- strigi-0.7.2-x86_64-2.txt

-|   |   |-- strigi-0.7.2-x86_64-2.txz

-|   |   |-- strigi-0.7.2-x86_64-2.txz.asc

-|   |   |-- svgalib-1.9.25-x86_64-2.txt

-|   |   |-- svgalib-1.9.25-x86_64-2.txz

-|   |   |-- svgalib-1.9.25-x86_64-2.txz.asc

-|   |   |-- system-config-printer-1.2.7-x86_64-1.txt

-|   |   |-- system-config-printer-1.2.7-x86_64-1.txz

-|   |   |-- system-config-printer-1.2.7-x86_64-1.txz.asc

-|   |   |-- t1lib-5.1.2-x86_64-2.txt

-|   |   |-- t1lib-5.1.2-x86_64-2.txz

-|   |   |-- t1lib-5.1.2-x86_64-2.txz.asc

-|   |   |-- tagfile

-|   |   |-- taglib-1.6.3-x86_64-1.txt

-|   |   |-- taglib-1.6.3-x86_64-1.txz

-|   |   |-- taglib-1.6.3-x86_64-1.txz.asc

-|   |   |-- taglib-extras-1.0.1-x86_64-1.txt

-|   |   |-- taglib-extras-1.0.1-x86_64-1.txz

-|   |   |-- taglib-extras-1.0.1-x86_64-1.txz.asc

-|   |   |-- tango-icon-theme-0.8.90-noarch-1.txt

-|   |   |-- tango-icon-theme-0.8.90-noarch-1.txz

-|   |   |-- tango-icon-theme-0.8.90-noarch-1.txz.asc

-|   |   |-- tango-icon-theme-extras-0.1.0-noarch-1.txt

-|   |   |-- tango-icon-theme-extras-0.1.0-noarch-1.txz

-|   |   |-- tango-icon-theme-extras-0.1.0-noarch-1.txz.asc

-|   |   |-- urwid-0.9.9.1-x86_64-1.txt

-|   |   |-- urwid-0.9.9.1-x86_64-1.txz

-|   |   |-- urwid-0.9.9.1-x86_64-1.txz.asc

-|   |   |-- v4l-utils-0.8.3-x86_64-2.txt

-|   |   |-- v4l-utils-0.8.3-x86_64-2.txz

-|   |   |-- v4l-utils-0.8.3-x86_64-2.txz.asc

-|   |   |-- virtuoso-ose-6.1.2-x86_64-1.txt

-|   |   |-- virtuoso-ose-6.1.2-x86_64-1.txz

-|   |   |-- virtuoso-ose-6.1.2-x86_64-1.txz.asc

-|   |   |-- vte-0.26.2-x86_64-1.txt

-|   |   |-- vte-0.26.2-x86_64-1.txz

-|   |   |-- vte-0.26.2-x86_64-1.txz.asc

-|   |   |-- wavpack-4.60.1-x86_64-1.txt

-|   |   |-- wavpack-4.60.1-x86_64-1.txz

-|   |   |-- wavpack-4.60.1-x86_64-1.txz.asc

-|   |   |-- wv2-0.4.2-x86_64-1.txt

-|   |   |-- wv2-0.4.2-x86_64-1.txz

-|   |   |-- wv2-0.4.2-x86_64-1.txz.asc

-|   |   |-- zlib-1.2.5-x86_64-4.txt

-|   |   |-- zlib-1.2.5-x86_64-4.txz

-|   |   `-- zlib-1.2.5-x86_64-4.txz.asc

-|   |-- n

-|   |   |-- alpine-2.00-x86_64-3.txt

-|   |   |-- alpine-2.00-x86_64-3.txz

-|   |   |-- alpine-2.00-x86_64-3.txz.asc

-|   |   |-- autofs-5.0.5-x86_64-1.txt

-|   |   |-- autofs-5.0.5-x86_64-1.txz

-|   |   |-- autofs-5.0.5-x86_64-1.txz.asc

-|   |   |-- biff+comsat-0.17-x86_64-1.txt

-|   |   |-- biff+comsat-0.17-x86_64-1.txz

-|   |   |-- biff+comsat-0.17-x86_64-1.txz.asc

-|   |   |-- bind-9.7.3-x86_64-2.txt

-|   |   |-- bind-9.7.3-x86_64-2.txz

-|   |   |-- bind-9.7.3-x86_64-2.txz.asc

-|   |   |-- bluez-4.91-x86_64-1.txt

-|   |   |-- bluez-4.91-x86_64-1.txz

-|   |   |-- bluez-4.91-x86_64-1.txz.asc

-|   |   |-- bluez-firmware-1.2-x86_64-1.txt

-|   |   |-- bluez-firmware-1.2-x86_64-1.txz

-|   |   |-- bluez-firmware-1.2-x86_64-1.txz.asc

-|   |   |-- bluez-hcidump-2.0-x86_64-1.txt

-|   |   |-- bluez-hcidump-2.0-x86_64-1.txz

-|   |   |-- bluez-hcidump-2.0-x86_64-1.txz.asc

-|   |   |-- bootp-2.4.3-x86_64-2.txt

-|   |   |-- bootp-2.4.3-x86_64-2.txz

-|   |   |-- bootp-2.4.3-x86_64-2.txz.asc

-|   |   |-- bridge-utils-1.4-x86_64-1.txt

-|   |   |-- bridge-utils-1.4-x86_64-1.txz

-|   |   |-- bridge-utils-1.4-x86_64-1.txz.asc

-|   |   |-- bsd-finger-0.17-x86_64-1.txt

-|   |   |-- bsd-finger-0.17-x86_64-1.txz

-|   |   |-- bsd-finger-0.17-x86_64-1.txz.asc

-|   |   |-- ca-certificates-20090814-noarch-1.txt

-|   |   |-- ca-certificates-20090814-noarch-1.txz

-|   |   |-- ca-certificates-20090814-noarch-1.txz.asc

-|   |   |-- crda-1.1.1-x86_64-1.txt

-|   |   |-- crda-1.1.1-x86_64-1.txz

-|   |   |-- crda-1.1.1-x86_64-1.txz.asc

-|   |   |-- curl-7.21.4-x86_64-1.txt

-|   |   |-- curl-7.21.4-x86_64-1.txz

-|   |   |-- curl-7.21.4-x86_64-1.txz.asc

-|   |   |-- cyrus-sasl-2.1.23-x86_64-1.txt

-|   |   |-- cyrus-sasl-2.1.23-x86_64-1.txz

-|   |   |-- cyrus-sasl-2.1.23-x86_64-1.txz.asc

-|   |   |-- dhcp-4.2.1_P1-x86_64-1.txt

-|   |   |-- dhcp-4.2.1_P1-x86_64-1.txz

-|   |   |-- dhcp-4.2.1_P1-x86_64-1.txz.asc

-|   |   |-- dhcpcd-5.2.11-x86_64-1.txt

-|   |   |-- dhcpcd-5.2.11-x86_64-1.txz

-|   |   |-- dhcpcd-5.2.11-x86_64-1.txz.asc

-|   |   |-- dirmngr-1.1.0-x86_64-1.txt

-|   |   |-- dirmngr-1.1.0-x86_64-1.txz

-|   |   |-- dirmngr-1.1.0-x86_64-1.txz.asc

-|   |   |-- dnsmasq-2.57-x86_64-1.txt

-|   |   |-- dnsmasq-2.57-x86_64-1.txz

-|   |   |-- dnsmasq-2.57-x86_64-1.txz.asc

-|   |   |-- elm-2.5.8-x86_64-3.txt

-|   |   |-- elm-2.5.8-x86_64-3.txz

-|   |   |-- elm-2.5.8-x86_64-3.txz.asc

-|   |   |-- epic5-1.1.2-x86_64-1.txt

-|   |   |-- epic5-1.1.2-x86_64-1.txz

-|   |   |-- epic5-1.1.2-x86_64-1.txz.asc

-|   |   |-- ethtool-2.6.36-x86_64-1.txt

-|   |   |-- ethtool-2.6.36-x86_64-1.txz

-|   |   |-- ethtool-2.6.36-x86_64-1.txz.asc

-|   |   |-- fetchmail-6.3.19-x86_64-1.txt

-|   |   |-- fetchmail-6.3.19-x86_64-1.txz

-|   |   |-- fetchmail-6.3.19-x86_64-1.txz.asc

-|   |   |-- getmail-4.20.0-x86_64-1.txt

-|   |   |-- getmail-4.20.0-x86_64-1.txz

-|   |   |-- getmail-4.20.0-x86_64-1.txz.asc

-|   |   |-- gnupg-1.4.11-x86_64-1.txt

-|   |   |-- gnupg-1.4.11-x86_64-1.txz

-|   |   |-- gnupg-1.4.11-x86_64-1.txz.asc

-|   |   |-- gnupg2-2.0.17-x86_64-1.txt

-|   |   |-- gnupg2-2.0.17-x86_64-1.txz

-|   |   |-- gnupg2-2.0.17-x86_64-1.txz.asc

-|   |   |-- gnutls-2.10.5-x86_64-1.txt

-|   |   |-- gnutls-2.10.5-x86_64-1.txz

-|   |   |-- gnutls-2.10.5-x86_64-1.txz.asc

-|   |   |-- gpa-0.7.5-x86_64-1.txt

-|   |   |-- gpa-0.7.5-x86_64-1.txz

-|   |   |-- gpa-0.7.5-x86_64-1.txz.asc

-|   |   |-- gpgme-1.3.0-x86_64-1.txt

-|   |   |-- gpgme-1.3.0-x86_64-1.txz

-|   |   |-- gpgme-1.3.0-x86_64-1.txz.asc

-|   |   |-- htdig-3.2.0b6-x86_64-3.txt

-|   |   |-- htdig-3.2.0b6-x86_64-3.txz

-|   |   |-- htdig-3.2.0b6-x86_64-3.txz.asc

-|   |   |-- httpd-2.2.17-x86_64-3.txt

-|   |   |-- httpd-2.2.17-x86_64-3.txz

-|   |   |-- httpd-2.2.17-x86_64-3.txz.asc

-|   |   |-- icmpinfo-1.11-x86_64-1.txt

-|   |   |-- icmpinfo-1.11-x86_64-1.txz

-|   |   |-- icmpinfo-1.11-x86_64-1.txz.asc

-|   |   |-- idnkit-1.0-x86_64-1.txt

-|   |   |-- idnkit-1.0-x86_64-1.txz

-|   |   |-- idnkit-1.0-x86_64-1.txz.asc

-|   |   |-- imapd-2.00-x86_64-2.txt

-|   |   |-- imapd-2.00-x86_64-2.txz

-|   |   |-- imapd-2.00-x86_64-2.txz.asc

-|   |   |-- inetd-1.79s-x86_64-8.txt

-|   |   |-- inetd-1.79s-x86_64-8.txz

-|   |   |-- inetd-1.79s-x86_64-8.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- iproute2-2.6.37-x86_64-1.txt

-|   |   |-- iproute2-2.6.37-x86_64-1.txz

-|   |   |-- iproute2-2.6.37-x86_64-1.txz.asc

-|   |   |-- iptables-1.4.10-x86_64-1.txt

-|   |   |-- iptables-1.4.10-x86_64-1.txz

-|   |   |-- iptables-1.4.10-x86_64-1.txz.asc

-|   |   |-- iptraf-ng-1.0.2-x86_64-2.txt

-|   |   |-- iptraf-ng-1.0.2-x86_64-2.txz

-|   |   |-- iptraf-ng-1.0.2-x86_64-2.txz.asc

-|   |   |-- iputils-s20101006-x86_64-1.txt

-|   |   |-- iputils-s20101006-x86_64-1.txz

-|   |   |-- iputils-s20101006-x86_64-1.txz.asc

-|   |   |-- ipw2100-fw-1.3-fw-1.txt

-|   |   |-- ipw2100-fw-1.3-fw-1.txz

-|   |   |-- ipw2100-fw-1.3-fw-1.txz.asc

-|   |   |-- ipw2200-fw-3.1-fw-1.txt

-|   |   |-- ipw2200-fw-3.1-fw-1.txz

-|   |   |-- ipw2200-fw-3.1-fw-1.txz.asc

-|   |   |-- irssi-0.8.15-x86_64-3.txt

-|   |   |-- irssi-0.8.15-x86_64-3.txz

-|   |   |-- irssi-0.8.15-x86_64-3.txz.asc

-|   |   |-- iw-0.9.20-x86_64-1.txt

-|   |   |-- iw-0.9.20-x86_64-1.txz

-|   |   |-- iw-0.9.20-x86_64-1.txz.asc

-|   |   |-- iwlwifi-100-ucode-39.31.5.1-fw-1.txt

-|   |   |-- iwlwifi-100-ucode-39.31.5.1-fw-1.txz

-|   |   |-- iwlwifi-100-ucode-39.31.5.1-fw-1.txz.asc

-|   |   |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txt

-|   |   |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txz

-|   |   |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txz.asc

-|   |   |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txt

-|   |   |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txz

-|   |   |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txz.asc

-|   |   |-- iwlwifi-4965-ucode-228.61.2.24-fw-1.txt

-|   |   |-- iwlwifi-4965-ucode-228.61.2.24-fw-1.txz

-|   |   |-- iwlwifi-4965-ucode-228.61.2.24-fw-1.txz.asc

-|   |   |-- iwlwifi-5000-ucode-8.83.5.1-fw-1.txt

-|   |   |-- iwlwifi-5000-ucode-8.83.5.1-fw-1.txz

-|   |   |-- iwlwifi-5000-ucode-8.83.5.1-fw-1.txz.asc

-|   |   |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txt

-|   |   |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txz

-|   |   |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txz.asc

-|   |   |-- iwlwifi-6000-ucode-9.221.4.1-fw-1.txt

-|   |   |-- iwlwifi-6000-ucode-9.221.4.1-fw-1.txz

-|   |   |-- iwlwifi-6000-ucode-9.221.4.1-fw-1.txz.asc

-|   |   |-- iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txt

-|   |   |-- iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz

-|   |   |-- iwlwifi-6xxx-ucode-41.28.5.1-fw-1.txz.asc

-|   |   |-- lftp-4.2.2-x86_64-1.txt

-|   |   |-- lftp-4.2.2-x86_64-1.txz

-|   |   |-- lftp-4.2.2-x86_64-1.txz.asc

-|   |   |-- libassuan-2.0.1-x86_64-1.txt

-|   |   |-- libassuan-2.0.1-x86_64-1.txz

-|   |   |-- libassuan-2.0.1-x86_64-1.txz.asc

-|   |   |-- libgcrypt-1.4.6-x86_64-1.txt

-|   |   |-- libgcrypt-1.4.6-x86_64-1.txz

-|   |   |-- libgcrypt-1.4.6-x86_64-1.txz.asc

-|   |   |-- libgpg-error-1.9-x86_64-1.txt

-|   |   |-- libgpg-error-1.9-x86_64-1.txz

-|   |   |-- libgpg-error-1.9-x86_64-1.txz.asc

-|   |   |-- libksba-1.2.0-x86_64-1.txt

-|   |   |-- libksba-1.2.0-x86_64-1.txz

-|   |   |-- libksba-1.2.0-x86_64-1.txz.asc

-|   |   |-- links-2.3pre1-x86_64-1.txt

-|   |   |-- links-2.3pre1-x86_64-1.txz

-|   |   |-- links-2.3pre1-x86_64-1.txz.asc

-|   |   |-- lynx-2.8.7-x86_64-1.txt

-|   |   |-- lynx-2.8.7-x86_64-1.txz

-|   |   |-- lynx-2.8.7-x86_64-1.txz.asc

-|   |   |-- mailx-12.4-x86_64-1.txt

-|   |   |-- mailx-12.4-x86_64-1.txz

-|   |   |-- mailx-12.4-x86_64-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mcabber-0.10.1-x86_64-1.txt

-|   |   |-- mcabber-0.10.1-x86_64-1.txz

-|   |   |-- mcabber-0.10.1-x86_64-1.txz.asc

-|   |   |-- metamail-2.7-x86_64-5.txt

-|   |   |-- metamail-2.7-x86_64-5.txz

-|   |   |-- metamail-2.7-x86_64-5.txz.asc

-|   |   |-- mtr-0.80-x86_64-1.txt

-|   |   |-- mtr-0.80-x86_64-1.txz

-|   |   |-- mtr-0.80-x86_64-1.txz.asc

-|   |   |-- mutt-1.5.21-x86_64-1.txt

-|   |   |-- mutt-1.5.21-x86_64-1.txz

-|   |   |-- mutt-1.5.21-x86_64-1.txz.asc

-|   |   |-- nc-1.10-x86_64-1.txt

-|   |   |-- nc-1.10-x86_64-1.txz

-|   |   |-- nc-1.10-x86_64-1.txz.asc

-|   |   |-- ncftp-3.2.5-x86_64-1.txt

-|   |   |-- ncftp-3.2.5-x86_64-1.txz

-|   |   |-- ncftp-3.2.5-x86_64-1.txz.asc

-|   |   |-- net-snmp-5.6.1-x86_64-1.txt

-|   |   |-- net-snmp-5.6.1-x86_64-1.txz

-|   |   |-- net-snmp-5.6.1-x86_64-1.txz.asc

-|   |   |-- net-tools-1.60-x86_64-3.txt

-|   |   |-- net-tools-1.60-x86_64-3.txz

-|   |   |-- net-tools-1.60-x86_64-3.txz.asc

-|   |   |-- netatalk-2.0.5-x86_64-1.txt

-|   |   |-- netatalk-2.0.5-x86_64-1.txz

-|   |   |-- netatalk-2.0.5-x86_64-1.txz.asc

-|   |   |-- netdate-bsd4-x86_64-1.txt

-|   |   |-- netdate-bsd4-x86_64-1.txz

-|   |   |-- netdate-bsd4-x86_64-1.txz.asc

-|   |   |-- netkit-bootparamd-0.17-x86_64-2.txt

-|   |   |-- netkit-bootparamd-0.17-x86_64-2.txz

-|   |   |-- netkit-bootparamd-0.17-x86_64-2.txz.asc

-|   |   |-- netkit-ftp-0.17-x86_64-1.txt

-|   |   |-- netkit-ftp-0.17-x86_64-1.txz

-|   |   |-- netkit-ftp-0.17-x86_64-1.txz.asc

-|   |   |-- netkit-ntalk-0.17-x86_64-3.txt

-|   |   |-- netkit-ntalk-0.17-x86_64-3.txz

-|   |   |-- netkit-ntalk-0.17-x86_64-3.txz.asc

-|   |   |-- netkit-routed-0.17-x86_64-1.txt

-|   |   |-- netkit-routed-0.17-x86_64-1.txz

-|   |   |-- netkit-routed-0.17-x86_64-1.txz.asc

-|   |   |-- netkit-rsh-0.17-x86_64-1.txt

-|   |   |-- netkit-rsh-0.17-x86_64-1.txz

-|   |   |-- netkit-rsh-0.17-x86_64-1.txz.asc

-|   |   |-- netkit-rusers-0.17-x86_64-1.txt

-|   |   |-- netkit-rusers-0.17-x86_64-1.txz

-|   |   |-- netkit-rusers-0.17-x86_64-1.txz.asc

-|   |   |-- netkit-rwall-0.17-x86_64-1.txt

-|   |   |-- netkit-rwall-0.17-x86_64-1.txz

-|   |   |-- netkit-rwall-0.17-x86_64-1.txz.asc

-|   |   |-- netkit-rwho-0.17-x86_64-2.txt

-|   |   |-- netkit-rwho-0.17-x86_64-2.txz

-|   |   |-- netkit-rwho-0.17-x86_64-2.txz.asc

-|   |   |-- netkit-timed-0.17-x86_64-1.txt

-|   |   |-- netkit-timed-0.17-x86_64-1.txz

-|   |   |-- netkit-timed-0.17-x86_64-1.txz.asc

-|   |   |-- netpipes-4.2-x86_64-1.txt

-|   |   |-- netpipes-4.2-x86_64-1.txz

-|   |   |-- netpipes-4.2-x86_64-1.txz.asc

-|   |   |-- netwatch-1.3.0-x86_64-2.txt

-|   |   |-- netwatch-1.3.0-x86_64-2.txz

-|   |   |-- netwatch-1.3.0-x86_64-2.txz.asc

-|   |   |-- network-scripts-13.0-noarch-3.txt

-|   |   |-- network-scripts-13.0-noarch-3.txz

-|   |   |-- network-scripts-13.0-noarch-3.txz.asc

-|   |   |-- netwrite-0.17-x86_64-1.txt

-|   |   |-- netwrite-0.17-x86_64-1.txz

-|   |   |-- netwrite-0.17-x86_64-1.txz.asc

-|   |   |-- newspost-2.1.1-x86_64-1.txt

-|   |   |-- newspost-2.1.1-x86_64-1.txz

-|   |   |-- newspost-2.1.1-x86_64-1.txz.asc

-|   |   |-- nfs-utils-1.2.3-x86_64-3.txt

-|   |   |-- nfs-utils-1.2.3-x86_64-3.txz

-|   |   |-- nfs-utils-1.2.3-x86_64-3.txz.asc

-|   |   |-- nmap-5.51-x86_64-1.txt

-|   |   |-- nmap-5.51-x86_64-1.txz

-|   |   |-- nmap-5.51-x86_64-1.txz.asc

-|   |   |-- nn-6.7.3-x86_64-3.txt

-|   |   |-- nn-6.7.3-x86_64-3.txz

-|   |   |-- nn-6.7.3-x86_64-3.txz.asc

-|   |   |-- ntp-4.2.6p3-x86_64-1.txt

-|   |   |-- ntp-4.2.6p3-x86_64-1.txz

-|   |   |-- ntp-4.2.6p3-x86_64-1.txz.asc

-|   |   |-- obex-data-server-0.4.5-x86_64-2.txt

-|   |   |-- obex-data-server-0.4.5-x86_64-2.txz

-|   |   |-- obex-data-server-0.4.5-x86_64-2.txz.asc

-|   |   |-- obexfs-0.12-x86_64-1.txt

-|   |   |-- obexfs-0.12-x86_64-1.txz

-|   |   |-- obexfs-0.12-x86_64-1.txz.asc

-|   |   |-- obexftp-0.23-x86_64-5.txt

-|   |   |-- obexftp-0.23-x86_64-5.txz

-|   |   |-- obexftp-0.23-x86_64-5.txz.asc

-|   |   |-- openldap-client-2.4.23-x86_64-1.txt

-|   |   |-- openldap-client-2.4.23-x86_64-1.txz

-|   |   |-- openldap-client-2.4.23-x86_64-1.txz.asc

-|   |   |-- openobex-1.5-x86_64-1.txt

-|   |   |-- openobex-1.5-x86_64-1.txz

-|   |   |-- openobex-1.5-x86_64-1.txz.asc

-|   |   |-- openssh-5.8p1-x86_64-1.txt

-|   |   |-- openssh-5.8p1-x86_64-1.txz

-|   |   |-- openssh-5.8p1-x86_64-1.txz.asc

-|   |   |-- openssl-0.9.8r-x86_64-3.txt

-|   |   |-- openssl-0.9.8r-x86_64-3.txz

-|   |   |-- openssl-0.9.8r-x86_64-3.txz.asc

-|   |   |-- openvpn-2.1.4-x86_64-2.txt

-|   |   |-- openvpn-2.1.4-x86_64-2.txz

-|   |   |-- openvpn-2.1.4-x86_64-2.txz.asc

-|   |   |-- php-5.3.6-x86_64-6.txt

-|   |   |-- php-5.3.6-x86_64-6.txz

-|   |   |-- php-5.3.6-x86_64-6.txz.asc

-|   |   |-- pidentd-3.0.19-x86_64-1.txt

-|   |   |-- pidentd-3.0.19-x86_64-1.txz

-|   |   |-- pidentd-3.0.19-x86_64-1.txz.asc

-|   |   |-- pinentry-0.8.1-x86_64-1.txt

-|   |   |-- pinentry-0.8.1-x86_64-1.txz

-|   |   |-- pinentry-0.8.1-x86_64-1.txz.asc

-|   |   |-- popa3d-1.0.2-x86_64-2.txt

-|   |   |-- popa3d-1.0.2-x86_64-2.txz

-|   |   |-- popa3d-1.0.2-x86_64-2.txz.asc

-|   |   |-- portmap-6.0-x86_64-1.txt

-|   |   |-- portmap-6.0-x86_64-1.txz

-|   |   |-- portmap-6.0-x86_64-1.txz.asc

-|   |   |-- ppp-2.4.5-x86_64-1.txt

-|   |   |-- ppp-2.4.5-x86_64-1.txz

-|   |   |-- ppp-2.4.5-x86_64-1.txz.asc

-|   |   |-- procmail-3.22-x86_64-2.txt

-|   |   |-- procmail-3.22-x86_64-2.txz

-|   |   |-- procmail-3.22-x86_64-2.txz.asc

-|   |   |-- proftpd-1.3.3e-x86_64-1.txt

-|   |   |-- proftpd-1.3.3e-x86_64-1.txz

-|   |   |-- proftpd-1.3.3e-x86_64-1.txz.asc

-|   |   |-- pssh-2.2-x86_64-1.txt

-|   |   |-- pssh-2.2-x86_64-1.txz

-|   |   |-- pssh-2.2-x86_64-1.txz.asc

-|   |   |-- pth-2.0.7-x86_64-1.txt

-|   |   |-- pth-2.0.7-x86_64-1.txz

-|   |   |-- pth-2.0.7-x86_64-1.txz.asc

-|   |   |-- rdist-6.1.5-x86_64-2.txt

-|   |   |-- rdist-6.1.5-x86_64-2.txz

-|   |   |-- rdist-6.1.5-x86_64-2.txz.asc

-|   |   |-- rfkill-0.4-x86_64-1.txt

-|   |   |-- rfkill-0.4-x86_64-1.txz

-|   |   |-- rfkill-0.4-x86_64-1.txz.asc

-|   |   |-- rp-pppoe-3.10-x86_64-1.txt

-|   |   |-- rp-pppoe-3.10-x86_64-1.txz

-|   |   |-- rp-pppoe-3.10-x86_64-1.txz.asc

-|   |   |-- rsync-3.0.8-x86_64-1.txt

-|   |   |-- rsync-3.0.8-x86_64-1.txz

-|   |   |-- rsync-3.0.8-x86_64-1.txz.asc

-|   |   |-- rt2860-firmware-26-fw-1.txt

-|   |   |-- rt2860-firmware-26-fw-1.txz

-|   |   |-- rt2860-firmware-26-fw-1.txz.asc

-|   |   |-- rt2870-firmware-22-fw-1.txt

-|   |   |-- rt2870-firmware-22-fw-1.txz

-|   |   |-- rt2870-firmware-22-fw-1.txz.asc

-|   |   |-- rt61-firmware-1.2-fw-1.txt

-|   |   |-- rt61-firmware-1.2-fw-1.txz

-|   |   |-- rt61-firmware-1.2-fw-1.txz.asc

-|   |   |-- rt71w-firmware-1.8-fw-1.txt

-|   |   |-- rt71w-firmware-1.8-fw-1.txz

-|   |   |-- rt71w-firmware-1.8-fw-1.txz.asc

-|   |   |-- samba-3.5.8-x86_64-1.txt

-|   |   |-- samba-3.5.8-x86_64-1.txz

-|   |   |-- samba-3.5.8-x86_64-1.txz.asc

-|   |   |-- sendmail-8.14.4-x86_64-1.txt

-|   |   |-- sendmail-8.14.4-x86_64-1.txz

-|   |   |-- sendmail-8.14.4-x86_64-1.txz.asc

-|   |   |-- sendmail-cf-8.14.4-noarch-1.txt

-|   |   |-- sendmail-cf-8.14.4-noarch-1.txz

-|   |   |-- sendmail-cf-8.14.4-noarch-1.txz.asc

-|   |   |-- slrn-0.9.9p1-x86_64-3.txt

-|   |   |-- slrn-0.9.9p1-x86_64-3.txz

-|   |   |-- slrn-0.9.9p1-x86_64-3.txz.asc

-|   |   |-- snownews-1.5.12-x86_64-1.txt

-|   |   |-- snownews-1.5.12-x86_64-1.txz

-|   |   |-- snownews-1.5.12-x86_64-1.txz.asc

-|   |   |-- stunnel-4.35-x86_64-1.txt

-|   |   |-- stunnel-4.35-x86_64-1.txz

-|   |   |-- stunnel-4.35-x86_64-1.txz.asc

-|   |   |-- tagfile

-|   |   |-- tcp_wrappers-7.6-x86_64-1.txt

-|   |   |-- tcp_wrappers-7.6-x86_64-1.txz

-|   |   |-- tcp_wrappers-7.6-x86_64-1.txz.asc

-|   |   |-- tcpdump-4.1.1-x86_64-1.txt

-|   |   |-- tcpdump-4.1.1-x86_64-1.txz

-|   |   |-- tcpdump-4.1.1-x86_64-1.txz.asc

-|   |   |-- telnet-0.17-x86_64-2.txt

-|   |   |-- telnet-0.17-x86_64-2.txz

-|   |   |-- telnet-0.17-x86_64-2.txz.asc

-|   |   |-- tftp-hpa-0.49-x86_64-1.txt

-|   |   |-- tftp-hpa-0.49-x86_64-1.txz

-|   |   |-- tftp-hpa-0.49-x86_64-1.txz.asc

-|   |   |-- tin-1.8.3-x86_64-2.txt

-|   |   |-- tin-1.8.3-x86_64-2.txz

-|   |   |-- tin-1.8.3-x86_64-2.txz.asc

-|   |   |-- traceroute-2.0.17-x86_64-1.txt

-|   |   |-- traceroute-2.0.17-x86_64-1.txz

-|   |   |-- traceroute-2.0.17-x86_64-1.txz.asc

-|   |   |-- trn-3.6-x86_64-2.txt

-|   |   |-- trn-3.6-x86_64-2.txz

-|   |   |-- trn-3.6-x86_64-2.txz.asc

-|   |   |-- uucp-1.07-x86_64-1.txt

-|   |   |-- uucp-1.07-x86_64-1.txz

-|   |   |-- uucp-1.07-x86_64-1.txz.asc

-|   |   |-- vlan-1.9-x86_64-2.txt

-|   |   |-- vlan-1.9-x86_64-2.txz

-|   |   |-- vlan-1.9-x86_64-2.txz.asc

-|   |   |-- vsftpd-2.3.4-x86_64-1.txt

-|   |   |-- vsftpd-2.3.4-x86_64-1.txz

-|   |   |-- vsftpd-2.3.4-x86_64-1.txz.asc

-|   |   |-- wget-1.12-x86_64-1.txt

-|   |   |-- wget-1.12-x86_64-1.txz

-|   |   |-- wget-1.12-x86_64-1.txz.asc

-|   |   |-- whois-5.0.11-x86_64-1.txt

-|   |   |-- whois-5.0.11-x86_64-1.txz

-|   |   |-- whois-5.0.11-x86_64-1.txz.asc

-|   |   |-- wireless-tools-29-x86_64-6.txt

-|   |   |-- wireless-tools-29-x86_64-6.txz

-|   |   |-- wireless-tools-29-x86_64-6.txz.asc

-|   |   |-- wpa_supplicant-0.7.3-x86_64-3.txt

-|   |   |-- wpa_supplicant-0.7.3-x86_64-3.txz

-|   |   |-- wpa_supplicant-0.7.3-x86_64-3.txz.asc

-|   |   |-- yptools-2.12-x86_64-2.txt

-|   |   |-- yptools-2.12-x86_64-2.txz

-|   |   |-- yptools-2.12-x86_64-2.txz.asc

-|   |   |-- ytalk-3.3.0-x86_64-2.txt

-|   |   |-- ytalk-3.3.0-x86_64-2.txz

-|   |   |-- ytalk-3.3.0-x86_64-2.txz.asc

-|   |   |-- zd1211-firmware-1.4-fw-1.txt

-|   |   |-- zd1211-firmware-1.4-fw-1.txz

-|   |   `-- zd1211-firmware-1.4-fw-1.txz.asc

-|   |-- t

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- tagfile

-|   |   |-- tetex-3.0-x86_64-8.txt

-|   |   |-- tetex-3.0-x86_64-8.txz

-|   |   |-- tetex-3.0-x86_64-8.txz.asc

-|   |   |-- tetex-doc-3.0-x86_64-8.txt

-|   |   |-- tetex-doc-3.0-x86_64-8.txz

-|   |   |-- tetex-doc-3.0-x86_64-8.txz.asc

-|   |   |-- transfig-3.2.4-x86_64-3.txt

-|   |   |-- transfig-3.2.4-x86_64-3.txz

-|   |   |-- transfig-3.2.4-x86_64-3.txz.asc

-|   |   |-- xfig-3.2.4-x86_64-5.txt

-|   |   |-- xfig-3.2.4-x86_64-5.txz

-|   |   `-- xfig-3.2.4-x86_64-5.txz.asc

-|   |-- tcl

-|   |   |-- expect-5.44.1.15-x86_64-1.txt

-|   |   |-- expect-5.44.1.15-x86_64-1.txz

-|   |   |-- expect-5.44.1.15-x86_64-1.txz.asc

-|   |   |-- hfsutils-3.2.6-x86_64-4.txt

-|   |   |-- hfsutils-3.2.6-x86_64-4.txz

-|   |   |-- hfsutils-3.2.6-x86_64-4.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- tagfile

-|   |   |-- tcl-8.5.9-x86_64-1.txt

-|   |   |-- tcl-8.5.9-x86_64-1.txz

-|   |   |-- tcl-8.5.9-x86_64-1.txz.asc

-|   |   |-- tclx-8.4-x86_64-3.txt

-|   |   |-- tclx-8.4-x86_64-3.txz

-|   |   |-- tclx-8.4-x86_64-3.txz.asc

-|   |   |-- tix-8.4.3-x86_64-2.txt

-|   |   |-- tix-8.4.3-x86_64-2.txz

-|   |   |-- tix-8.4.3-x86_64-2.txz.asc

-|   |   |-- tk-8.5.9-x86_64-1.txt

-|   |   |-- tk-8.5.9-x86_64-1.txz

-|   |   `-- tk-8.5.9-x86_64-1.txz.asc

-|   |-- x

-|   |   |-- anthy-9100h-x86_64-1.txt

-|   |   |-- anthy-9100h-x86_64-1.txz

-|   |   |-- anthy-9100h-x86_64-1.txz.asc

-|   |   |-- appres-1.0.3-x86_64-1.txt

-|   |   |-- appres-1.0.3-x86_64-1.txz

-|   |   |-- appres-1.0.3-x86_64-1.txz.asc

-|   |   |-- bdftopcf-1.0.3-x86_64-1.txt

-|   |   |-- bdftopcf-1.0.3-x86_64-1.txz

-|   |   |-- bdftopcf-1.0.3-x86_64-1.txz.asc

-|   |   |-- beforelight-1.0.4-x86_64-1.txt

-|   |   |-- beforelight-1.0.4-x86_64-1.txz

-|   |   |-- beforelight-1.0.4-x86_64-1.txz.asc

-|   |   |-- bigreqsproto-1.1.1-noarch-1.txt

-|   |   |-- bigreqsproto-1.1.1-noarch-1.txz

-|   |   |-- bigreqsproto-1.1.1-noarch-1.txz.asc

-|   |   |-- bitmap-1.0.5-x86_64-1.txt

-|   |   |-- bitmap-1.0.5-x86_64-1.txz

-|   |   |-- bitmap-1.0.5-x86_64-1.txz.asc

-|   |   |-- compiz-0.8.8-x86_64-1.txt

-|   |   |-- compiz-0.8.8-x86_64-1.txz

-|   |   |-- compiz-0.8.8-x86_64-1.txz.asc

-|   |   |-- compositeproto-0.4.2-noarch-1.txt

-|   |   |-- compositeproto-0.4.2-noarch-1.txz

-|   |   |-- compositeproto-0.4.2-noarch-1.txz.asc

-|   |   |-- damageproto-1.2.1-noarch-1.txt

-|   |   |-- damageproto-1.2.1-noarch-1.txz

-|   |   |-- damageproto-1.2.1-noarch-1.txz.asc

-|   |   |-- dejavu-fonts-ttf-2.33-noarch-1.txt

-|   |   |-- dejavu-fonts-ttf-2.33-noarch-1.txz

-|   |   |-- dejavu-fonts-ttf-2.33-noarch-1.txz.asc

-|   |   |-- dmxproto-2.3.1-noarch-1.txt

-|   |   |-- dmxproto-2.3.1-noarch-1.txz

-|   |   |-- dmxproto-2.3.1-noarch-1.txz.asc

-|   |   |-- dri2proto-2.3-x86_64-1.txt

-|   |   |-- dri2proto-2.3-x86_64-1.txz

-|   |   |-- dri2proto-2.3-x86_64-1.txz.asc

-|   |   |-- editres-1.0.5-x86_64-1.txt

-|   |   |-- editres-1.0.5-x86_64-1.txz

-|   |   |-- editres-1.0.5-x86_64-1.txz.asc

-|   |   |-- encodings-1.0.4-noarch-1.txt

-|   |   |-- encodings-1.0.4-noarch-1.txz

-|   |   |-- encodings-1.0.4-noarch-1.txz.asc

-|   |   |-- evieext-1.1.1-noarch-1.txt

-|   |   |-- evieext-1.1.1-noarch-1.txz

-|   |   |-- evieext-1.1.1-noarch-1.txz.asc

-|   |   |-- fixesproto-5.0-x86_64-1.txt

-|   |   |-- fixesproto-5.0-x86_64-1.txz

-|   |   |-- fixesproto-5.0-x86_64-1.txz.asc

-|   |   |-- font-adobe-100dpi-1.0.3-noarch-1.txt

-|   |   |-- font-adobe-100dpi-1.0.3-noarch-1.txz

-|   |   |-- font-adobe-100dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-adobe-75dpi-1.0.3-noarch-1.txt

-|   |   |-- font-adobe-75dpi-1.0.3-noarch-1.txz

-|   |   |-- font-adobe-75dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-adobe-utopia-100dpi-1.0.4-noarch-1.txt

-|   |   |-- font-adobe-utopia-100dpi-1.0.4-noarch-1.txz

-|   |   |-- font-adobe-utopia-100dpi-1.0.4-noarch-1.txz.asc

-|   |   |-- font-adobe-utopia-75dpi-1.0.4-noarch-1.txt

-|   |   |-- font-adobe-utopia-75dpi-1.0.4-noarch-1.txz

-|   |   |-- font-adobe-utopia-75dpi-1.0.4-noarch-1.txz.asc

-|   |   |-- font-adobe-utopia-type1-1.0.4-noarch-1.txt

-|   |   |-- font-adobe-utopia-type1-1.0.4-noarch-1.txz

-|   |   |-- font-adobe-utopia-type1-1.0.4-noarch-1.txz.asc

-|   |   |-- font-alias-1.0.3-noarch-1.txt

-|   |   |-- font-alias-1.0.3-noarch-1.txz

-|   |   |-- font-alias-1.0.3-noarch-1.txz.asc

-|   |   |-- font-arabic-misc-1.0.3-noarch-1.txt

-|   |   |-- font-arabic-misc-1.0.3-noarch-1.txz

-|   |   |-- font-arabic-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-100dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bh-100dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bh-100dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-75dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bh-75dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bh-75dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bh-lucidatypewriter-100dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bh-lucidatypewriter-75dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-ttf-1.0.3-noarch-1.txt

-|   |   |-- font-bh-ttf-1.0.3-noarch-1.txz

-|   |   |-- font-bh-ttf-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bh-type1-1.0.3-noarch-1.txt

-|   |   |-- font-bh-type1-1.0.3-noarch-1.txz

-|   |   |-- font-bh-type1-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bitstream-100dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bitstream-100dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bitstream-100dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bitstream-75dpi-1.0.3-noarch-1.txt

-|   |   |-- font-bitstream-75dpi-1.0.3-noarch-1.txz

-|   |   |-- font-bitstream-75dpi-1.0.3-noarch-1.txz.asc

-|   |   |-- font-bitstream-speedo-1.0.2-noarch-1.txt

-|   |   |-- font-bitstream-speedo-1.0.2-noarch-1.txz

-|   |   |-- font-bitstream-speedo-1.0.2-noarch-1.txz.asc

-|   |   |-- font-bitstream-type1-1.0.3-noarch-1.txt

-|   |   |-- font-bitstream-type1-1.0.3-noarch-1.txz

-|   |   |-- font-bitstream-type1-1.0.3-noarch-1.txz.asc

-|   |   |-- font-cronyx-cyrillic-1.0.3-noarch-1.txt

-|   |   |-- font-cronyx-cyrillic-1.0.3-noarch-1.txz

-|   |   |-- font-cronyx-cyrillic-1.0.3-noarch-1.txz.asc

-|   |   |-- font-cursor-misc-1.0.3-noarch-1.txt

-|   |   |-- font-cursor-misc-1.0.3-noarch-1.txz

-|   |   |-- font-cursor-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-daewoo-misc-1.0.3-noarch-1.txt

-|   |   |-- font-daewoo-misc-1.0.3-noarch-1.txz

-|   |   |-- font-daewoo-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-dec-misc-1.0.3-noarch-1.txt

-|   |   |-- font-dec-misc-1.0.3-noarch-1.txz

-|   |   |-- font-dec-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-ibm-type1-1.0.3-noarch-1.txt

-|   |   |-- font-ibm-type1-1.0.3-noarch-1.txz

-|   |   |-- font-ibm-type1-1.0.3-noarch-1.txz.asc

-|   |   |-- font-isas-misc-1.0.3-noarch-1.txt

-|   |   |-- font-isas-misc-1.0.3-noarch-1.txz

-|   |   |-- font-isas-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-jis-misc-1.0.3-noarch-1.txt

-|   |   |-- font-jis-misc-1.0.3-noarch-1.txz

-|   |   |-- font-jis-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-micro-misc-1.0.3-noarch-1.txt

-|   |   |-- font-micro-misc-1.0.3-noarch-1.txz

-|   |   |-- font-micro-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-misc-cyrillic-1.0.3-noarch-1.txt

-|   |   |-- font-misc-cyrillic-1.0.3-noarch-1.txz

-|   |   |-- font-misc-cyrillic-1.0.3-noarch-1.txz.asc

-|   |   |-- font-misc-ethiopic-1.0.3-noarch-1.txt

-|   |   |-- font-misc-ethiopic-1.0.3-noarch-1.txz

-|   |   |-- font-misc-ethiopic-1.0.3-noarch-1.txz.asc

-|   |   |-- font-misc-meltho-1.0.3-noarch-1.txt

-|   |   |-- font-misc-meltho-1.0.3-noarch-1.txz

-|   |   |-- font-misc-meltho-1.0.3-noarch-1.txz.asc

-|   |   |-- font-misc-misc-1.1.2-noarch-1.txt

-|   |   |-- font-misc-misc-1.1.2-noarch-1.txz

-|   |   |-- font-misc-misc-1.1.2-noarch-1.txz.asc

-|   |   |-- font-mutt-misc-1.0.3-noarch-1.txt

-|   |   |-- font-mutt-misc-1.0.3-noarch-1.txz

-|   |   |-- font-mutt-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-schumacher-misc-1.1.2-noarch-1.txt

-|   |   |-- font-schumacher-misc-1.1.2-noarch-1.txz

-|   |   |-- font-schumacher-misc-1.1.2-noarch-1.txz.asc

-|   |   |-- font-screen-cyrillic-1.0.4-noarch-1.txt

-|   |   |-- font-screen-cyrillic-1.0.4-noarch-1.txz

-|   |   |-- font-screen-cyrillic-1.0.4-noarch-1.txz.asc

-|   |   |-- font-sony-misc-1.0.3-noarch-1.txt

-|   |   |-- font-sony-misc-1.0.3-noarch-1.txz

-|   |   |-- font-sony-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-sun-misc-1.0.3-noarch-1.txt

-|   |   |-- font-sun-misc-1.0.3-noarch-1.txz

-|   |   |-- font-sun-misc-1.0.3-noarch-1.txz.asc

-|   |   |-- font-util-1.2.0-x86_64-1.txt

-|   |   |-- font-util-1.2.0-x86_64-1.txz

-|   |   |-- font-util-1.2.0-x86_64-1.txz.asc

-|   |   |-- font-winitzki-cyrillic-1.0.3-noarch-1.txt

-|   |   |-- font-winitzki-cyrillic-1.0.3-noarch-1.txz

-|   |   |-- font-winitzki-cyrillic-1.0.3-noarch-1.txz.asc

-|   |   |-- font-xfree86-type1-1.0.4-noarch-1.txt

-|   |   |-- font-xfree86-type1-1.0.4-noarch-1.txz

-|   |   |-- font-xfree86-type1-1.0.4-noarch-1.txz.asc

-|   |   |-- fontcacheproto-0.1.3-noarch-1.txt

-|   |   |-- fontcacheproto-0.1.3-noarch-1.txz

-|   |   |-- fontcacheproto-0.1.3-noarch-1.txz.asc

-|   |   |-- fontconfig-2.8.0-x86_64-1.txt

-|   |   |-- fontconfig-2.8.0-x86_64-1.txz

-|   |   |-- fontconfig-2.8.0-x86_64-1.txz.asc

-|   |   |-- fontsproto-2.1.1-noarch-1.txt

-|   |   |-- fontsproto-2.1.1-noarch-1.txz

-|   |   |-- fontsproto-2.1.1-noarch-1.txz.asc

-|   |   |-- fonttosfnt-1.0.4-x86_64-1.txt

-|   |   |-- fonttosfnt-1.0.4-x86_64-1.txz

-|   |   |-- fonttosfnt-1.0.4-x86_64-1.txz.asc

-|   |   |-- fslsfonts-1.0.3-x86_64-1.txt

-|   |   |-- fslsfonts-1.0.3-x86_64-1.txz

-|   |   |-- fslsfonts-1.0.3-x86_64-1.txz.asc

-|   |   |-- fstobdf-1.0.4-x86_64-1.txt

-|   |   |-- fstobdf-1.0.4-x86_64-1.txz

-|   |   |-- fstobdf-1.0.4-x86_64-1.txz.asc

-|   |   |-- gccmakedep-1.0.2-noarch-2.txt

-|   |   |-- gccmakedep-1.0.2-noarch-2.txz

-|   |   |-- gccmakedep-1.0.2-noarch-2.txz.asc

-|   |   |-- glew-1.5.7-x86_64-1.txt

-|   |   |-- glew-1.5.7-x86_64-1.txz

-|   |   |-- glew-1.5.7-x86_64-1.txz.asc

-|   |   |-- glproto-1.4.12-noarch-1.txt

-|   |   |-- glproto-1.4.12-noarch-1.txz

-|   |   |-- glproto-1.4.12-noarch-1.txz.asc

-|   |   |-- iceauth-1.0.4-x86_64-1.txt

-|   |   |-- iceauth-1.0.4-x86_64-1.txz

-|   |   |-- iceauth-1.0.4-x86_64-1.txz.asc

-|   |   |-- ico-1.0.3-x86_64-1.txt

-|   |   |-- ico-1.0.3-x86_64-1.txz

-|   |   |-- ico-1.0.3-x86_64-1.txz.asc

-|   |   |-- imake-1.0.4-x86_64-1.txt

-|   |   |-- imake-1.0.4-x86_64-1.txz

-|   |   |-- imake-1.0.4-x86_64-1.txz.asc

-|   |   |-- inputproto-2.0.1-noarch-1.txt

-|   |   |-- inputproto-2.0.1-noarch-1.txz

-|   |   |-- inputproto-2.0.1-noarch-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- intel-gpu-tools-1.0.2-x86_64-1.txt

-|   |   |-- intel-gpu-tools-1.0.2-x86_64-1.txz

-|   |   |-- intel-gpu-tools-1.0.2-x86_64-1.txz.asc

-|   |   |-- kbproto-1.0.5-noarch-1.txt

-|   |   |-- kbproto-1.0.5-noarch-1.txz

-|   |   |-- kbproto-1.0.5-noarch-1.txz.asc

-|   |   |-- libFS-1.0.3-x86_64-1.txt

-|   |   |-- libFS-1.0.3-x86_64-1.txz

-|   |   |-- libFS-1.0.3-x86_64-1.txz.asc

-|   |   |-- libICE-1.0.7-x86_64-1.txt

-|   |   |-- libICE-1.0.7-x86_64-1.txz

-|   |   |-- libICE-1.0.7-x86_64-1.txz.asc

-|   |   |-- libSM-1.2.0-x86_64-1.txt

-|   |   |-- libSM-1.2.0-x86_64-1.txz

-|   |   |-- libSM-1.2.0-x86_64-1.txz.asc

-|   |   |-- libX11-1.4.3-x86_64-2.txt

-|   |   |-- libX11-1.4.3-x86_64-2.txz

-|   |   |-- libX11-1.4.3-x86_64-2.txz.asc

-|   |   |-- libXScrnSaver-1.2.1-x86_64-1.txt

-|   |   |-- libXScrnSaver-1.2.1-x86_64-1.txz

-|   |   |-- libXScrnSaver-1.2.1-x86_64-1.txz.asc

-|   |   |-- libXau-1.0.6-x86_64-1.txt

-|   |   |-- libXau-1.0.6-x86_64-1.txz

-|   |   |-- libXau-1.0.6-x86_64-1.txz.asc

-|   |   |-- libXaw-1.0.9-x86_64-1.txt

-|   |   |-- libXaw-1.0.9-x86_64-1.txz

-|   |   |-- libXaw-1.0.9-x86_64-1.txz.asc

-|   |   |-- libXcomposite-0.4.3-x86_64-1.txt

-|   |   |-- libXcomposite-0.4.3-x86_64-1.txz

-|   |   |-- libXcomposite-0.4.3-x86_64-1.txz.asc

-|   |   |-- libXcursor-1.1.11-x86_64-1.txt

-|   |   |-- libXcursor-1.1.11-x86_64-1.txz

-|   |   |-- libXcursor-1.1.11-x86_64-1.txz.asc

-|   |   |-- libXdamage-1.1.3-x86_64-1.txt

-|   |   |-- libXdamage-1.1.3-x86_64-1.txz

-|   |   |-- libXdamage-1.1.3-x86_64-1.txz.asc

-|   |   |-- libXdmcp-1.1.0-x86_64-1.txt

-|   |   |-- libXdmcp-1.1.0-x86_64-1.txz

-|   |   |-- libXdmcp-1.1.0-x86_64-1.txz.asc

-|   |   |-- libXevie-1.0.3-x86_64-1.txt

-|   |   |-- libXevie-1.0.3-x86_64-1.txz

-|   |   |-- libXevie-1.0.3-x86_64-1.txz.asc

-|   |   |-- libXext-1.2.0-x86_64-1.txt

-|   |   |-- libXext-1.2.0-x86_64-1.txz

-|   |   |-- libXext-1.2.0-x86_64-1.txz.asc

-|   |   |-- libXfixes-5.0-x86_64-1.txt

-|   |   |-- libXfixes-5.0-x86_64-1.txz

-|   |   |-- libXfixes-5.0-x86_64-1.txz.asc

-|   |   |-- libXfont-1.4.3-x86_64-1.txt

-|   |   |-- libXfont-1.4.3-x86_64-1.txz

-|   |   |-- libXfont-1.4.3-x86_64-1.txz.asc

-|   |   |-- libXfontcache-1.0.5-x86_64-1.txt

-|   |   |-- libXfontcache-1.0.5-x86_64-1.txz

-|   |   |-- libXfontcache-1.0.5-x86_64-1.txz.asc

-|   |   |-- libXft-2.2.0-x86_64-1.txt

-|   |   |-- libXft-2.2.0-x86_64-1.txz

-|   |   |-- libXft-2.2.0-x86_64-1.txz.asc

-|   |   |-- libXi-1.4.2-x86_64-1.txt

-|   |   |-- libXi-1.4.2-x86_64-1.txz

-|   |   |-- libXi-1.4.2-x86_64-1.txz.asc

-|   |   |-- libXinerama-1.1.1-x86_64-1.txt

-|   |   |-- libXinerama-1.1.1-x86_64-1.txz

-|   |   |-- libXinerama-1.1.1-x86_64-1.txz.asc

-|   |   |-- libXmu-1.1.0-x86_64-1.txt

-|   |   |-- libXmu-1.1.0-x86_64-1.txz

-|   |   |-- libXmu-1.1.0-x86_64-1.txz.asc

-|   |   |-- libXp-1.0.1-x86_64-1.txt

-|   |   |-- libXp-1.0.1-x86_64-1.txz

-|   |   |-- libXp-1.0.1-x86_64-1.txz.asc

-|   |   |-- libXpm-3.5.9-x86_64-1.txt

-|   |   |-- libXpm-3.5.9-x86_64-1.txz

-|   |   |-- libXpm-3.5.9-x86_64-1.txz.asc

-|   |   |-- libXrandr-1.3.1-x86_64-1.txt

-|   |   |-- libXrandr-1.3.1-x86_64-1.txz

-|   |   |-- libXrandr-1.3.1-x86_64-1.txz.asc

-|   |   |-- libXrender-0.9.6-x86_64-1.txt

-|   |   |-- libXrender-0.9.6-x86_64-1.txz

-|   |   |-- libXrender-0.9.6-x86_64-1.txz.asc

-|   |   |-- libXres-1.0.5-x86_64-1.txt

-|   |   |-- libXres-1.0.5-x86_64-1.txz

-|   |   |-- libXres-1.0.5-x86_64-1.txz.asc

-|   |   |-- libXt-1.1.1-x86_64-1.txt

-|   |   |-- libXt-1.1.1-x86_64-1.txz

-|   |   |-- libXt-1.1.1-x86_64-1.txz.asc

-|   |   |-- libXtst-1.2.0-x86_64-1.txt

-|   |   |-- libXtst-1.2.0-x86_64-1.txz

-|   |   |-- libXtst-1.2.0-x86_64-1.txz.asc

-|   |   |-- libXv-1.0.6-x86_64-1.txt

-|   |   |-- libXv-1.0.6-x86_64-1.txz

-|   |   |-- libXv-1.0.6-x86_64-1.txz.asc

-|   |   |-- libXvMC-1.0.6-x86_64-1.txt

-|   |   |-- libXvMC-1.0.6-x86_64-1.txz

-|   |   |-- libXvMC-1.0.6-x86_64-1.txz.asc

-|   |   |-- libXxf86dga-1.1.2-x86_64-1.txt

-|   |   |-- libXxf86dga-1.1.2-x86_64-1.txz

-|   |   |-- libXxf86dga-1.1.2-x86_64-1.txz.asc

-|   |   |-- libXxf86misc-1.0.3-x86_64-1.txt

-|   |   |-- libXxf86misc-1.0.3-x86_64-1.txz

-|   |   |-- libXxf86misc-1.0.3-x86_64-1.txz.asc

-|   |   |-- libXxf86vm-1.1.1-x86_64-1.txt

-|   |   |-- libXxf86vm-1.1.1-x86_64-1.txz

-|   |   |-- libXxf86vm-1.1.1-x86_64-1.txz.asc

-|   |   |-- libdmx-1.1.1-x86_64-1.txt

-|   |   |-- libdmx-1.1.1-x86_64-1.txz

-|   |   |-- libdmx-1.1.1-x86_64-1.txz.asc

-|   |   |-- libdrm-2.4.23-x86_64-1.txt

-|   |   |-- libdrm-2.4.23-x86_64-1.txz

-|   |   |-- libdrm-2.4.23-x86_64-1.txz.asc

-|   |   |-- liberation-fonts-ttf-1.06.0.20100721-noarch-3.txt

-|   |   |-- liberation-fonts-ttf-1.06.0.20100721-noarch-3.txz

-|   |   |-- liberation-fonts-ttf-1.06.0.20100721-noarch-3.txz.asc

-|   |   |-- libfontenc-1.1.0-x86_64-1.txt

-|   |   |-- libfontenc-1.1.0-x86_64-1.txz

-|   |   |-- libfontenc-1.1.0-x86_64-1.txz.asc

-|   |   |-- libhangul-0.0.12-x86_64-1.txt

-|   |   |-- libhangul-0.0.12-x86_64-1.txz

-|   |   |-- libhangul-0.0.12-x86_64-1.txz.asc

-|   |   |-- libpciaccess-0.12.1-x86_64-1.txt

-|   |   |-- libpciaccess-0.12.1-x86_64-1.txz

-|   |   |-- libpciaccess-0.12.1-x86_64-1.txz.asc

-|   |   |-- libpthread-stubs-0.3-noarch-1.txt

-|   |   |-- libpthread-stubs-0.3-noarch-1.txz

-|   |   |-- libpthread-stubs-0.3-noarch-1.txz.asc

-|   |   |-- libxcb-1.7-x86_64-1.txt

-|   |   |-- libxcb-1.7-x86_64-1.txz

-|   |   |-- libxcb-1.7-x86_64-1.txz.asc

-|   |   |-- libxkbfile-1.0.7-x86_64-1.txt

-|   |   |-- libxkbfile-1.0.7-x86_64-1.txz

-|   |   |-- libxkbfile-1.0.7-x86_64-1.txz.asc

-|   |   |-- listres-1.0.2-x86_64-1.txt

-|   |   |-- listres-1.0.2-x86_64-1.txz

-|   |   |-- listres-1.0.2-x86_64-1.txz.asc

-|   |   |-- lndir-1.0.2-x86_64-1.txt

-|   |   |-- lndir-1.0.2-x86_64-1.txz

-|   |   |-- lndir-1.0.2-x86_64-1.txz.asc

-|   |   |-- luit-1.1.0-x86_64-1.txt

-|   |   |-- luit-1.1.0-x86_64-1.txz

-|   |   |-- luit-1.1.0-x86_64-1.txz.asc

-|   |   |-- m17n-lib-1.6.1-x86_64-1.txt

-|   |   |-- m17n-lib-1.6.1-x86_64-1.txz

-|   |   |-- m17n-lib-1.6.1-x86_64-1.txz.asc

-|   |   |-- makedepend-1.0.3-x86_64-1.txt

-|   |   |-- makedepend-1.0.3-x86_64-1.txz

-|   |   |-- makedepend-1.0.3-x86_64-1.txz.asc

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mesa-7.9.2-x86_64-1.txt

-|   |   |-- mesa-7.9.2-x86_64-1.txz

-|   |   |-- mesa-7.9.2-x86_64-1.txz.asc

-|   |   |-- mkcomposecache-1.2.1-x86_64-1.txt

-|   |   |-- mkcomposecache-1.2.1-x86_64-1.txz

-|   |   |-- mkcomposecache-1.2.1-x86_64-1.txz.asc

-|   |   |-- mkfontdir-1.0.6-noarch-1.txt

-|   |   |-- mkfontdir-1.0.6-noarch-1.txz

-|   |   |-- mkfontdir-1.0.6-noarch-1.txz.asc

-|   |   |-- mkfontscale-1.0.8-x86_64-1.txt

-|   |   |-- mkfontscale-1.0.8-x86_64-1.txz

-|   |   |-- mkfontscale-1.0.8-x86_64-1.txz.asc

-|   |   |-- oclock-1.0.2-x86_64-1.txt

-|   |   |-- oclock-1.0.2-x86_64-1.txz

-|   |   |-- oclock-1.0.2-x86_64-1.txz.asc

-|   |   |-- pixman-0.20.2-x86_64-1.txt

-|   |   |-- pixman-0.20.2-x86_64-1.txz

-|   |   |-- pixman-0.20.2-x86_64-1.txz.asc

-|   |   |-- printproto-1.0.5-noarch-1.txt

-|   |   |-- printproto-1.0.5-noarch-1.txz

-|   |   |-- printproto-1.0.5-noarch-1.txz.asc

-|   |   |-- radeon_ucode-20110302-noarch-1.txt

-|   |   |-- radeon_ucode-20110302-noarch-1.txz

-|   |   |-- radeon_ucode-20110302-noarch-1.txz.asc

-|   |   |-- randrproto-1.3.2-noarch-1.txt

-|   |   |-- randrproto-1.3.2-noarch-1.txz

-|   |   |-- randrproto-1.3.2-noarch-1.txz.asc

-|   |   |-- recordproto-1.14.1-noarch-1.txt

-|   |   |-- recordproto-1.14.1-noarch-1.txz

-|   |   |-- recordproto-1.14.1-noarch-1.txz.asc

-|   |   |-- rendercheck-1.4-x86_64-1.txt

-|   |   |-- rendercheck-1.4-x86_64-1.txz

-|   |   |-- rendercheck-1.4-x86_64-1.txz.asc

-|   |   |-- renderproto-0.11.1-noarch-1.txt

-|   |   |-- renderproto-0.11.1-noarch-1.txz

-|   |   |-- renderproto-0.11.1-noarch-1.txz.asc

-|   |   |-- resourceproto-1.1.1-noarch-1.txt

-|   |   |-- resourceproto-1.1.1-noarch-1.txz

-|   |   |-- resourceproto-1.1.1-noarch-1.txz.asc

-|   |   |-- rgb-1.0.4-x86_64-1.txt

-|   |   |-- rgb-1.0.4-x86_64-1.txz

-|   |   |-- rgb-1.0.4-x86_64-1.txz.asc

-|   |   |-- sazanami-fonts-ttf-20040629-noarch-1.txt

-|   |   |-- sazanami-fonts-ttf-20040629-noarch-1.txz

-|   |   |-- sazanami-fonts-ttf-20040629-noarch-1.txz.asc

-|   |   |-- scim-1.4.9-x86_64-5.txt

-|   |   |-- scim-1.4.9-x86_64-5.txz

-|   |   |-- scim-1.4.9-x86_64-5.txz.asc

-|   |   |-- scim-anthy-1.2.4-x86_64-2.txt

-|   |   |-- scim-anthy-1.2.4-x86_64-2.txz

-|   |   |-- scim-anthy-1.2.4-x86_64-2.txz.asc

-|   |   |-- scim-bridge-0.4.16-x86_64-5.txt

-|   |   |-- scim-bridge-0.4.16-x86_64-5.txz

-|   |   |-- scim-bridge-0.4.16-x86_64-5.txz.asc

-|   |   |-- scim-hangul-0.3.2-x86_64-2.txt

-|   |   |-- scim-hangul-0.3.2-x86_64-2.txz

-|   |   |-- scim-hangul-0.3.2-x86_64-2.txz.asc

-|   |   |-- scim-input-pad-0.1.2-x86_64-4.txt

-|   |   |-- scim-input-pad-0.1.2-x86_64-4.txz

-|   |   |-- scim-input-pad-0.1.2-x86_64-4.txz.asc

-|   |   |-- scim-m17n-0.2.3-x86_64-1.txt

-|   |   |-- scim-m17n-0.2.3-x86_64-1.txz

-|   |   |-- scim-m17n-0.2.3-x86_64-1.txz.asc

-|   |   |-- scim-pinyin-0.5.91-x86_64-2.txt

-|   |   |-- scim-pinyin-0.5.91-x86_64-2.txz

-|   |   |-- scim-pinyin-0.5.91-x86_64-2.txz.asc

-|   |   |-- scim-tables-0.5.9-x86_64-3.txt

-|   |   |-- scim-tables-0.5.9-x86_64-3.txz

-|   |   |-- scim-tables-0.5.9-x86_64-3.txz.asc

-|   |   |-- scripts-1.0.1-noarch-2.txt

-|   |   |-- scripts-1.0.1-noarch-2.txz

-|   |   |-- scripts-1.0.1-noarch-2.txz.asc

-|   |   |-- scrnsaverproto-1.2.1-noarch-1.txt

-|   |   |-- scrnsaverproto-1.2.1-noarch-1.txz

-|   |   |-- scrnsaverproto-1.2.1-noarch-1.txz.asc

-|   |   |-- sessreg-1.0.6-x86_64-1.txt

-|   |   |-- sessreg-1.0.6-x86_64-1.txz

-|   |   |-- sessreg-1.0.6-x86_64-1.txz.asc

-|   |   |-- setxkbmap-1.2.0-x86_64-1.txt

-|   |   |-- setxkbmap-1.2.0-x86_64-1.txz

-|   |   |-- setxkbmap-1.2.0-x86_64-1.txz.asc

-|   |   |-- showfont-1.0.3-x86_64-1.txt

-|   |   |-- showfont-1.0.3-x86_64-1.txz

-|   |   |-- showfont-1.0.3-x86_64-1.txz.asc

-|   |   |-- sinhala_lklug-font-ttf-20060929-noarch-1.txt

-|   |   |-- sinhala_lklug-font-ttf-20060929-noarch-1.txz

-|   |   |-- sinhala_lklug-font-ttf-20060929-noarch-1.txz.asc

-|   |   |-- smproxy-1.0.4-x86_64-1.txt

-|   |   |-- smproxy-1.0.4-x86_64-1.txz

-|   |   |-- smproxy-1.0.4-x86_64-1.txz.asc

-|   |   |-- tagfile

-|   |   |-- tibmachuni-font-ttf-1.901b-noarch-1.txt

-|   |   |-- tibmachuni-font-ttf-1.901b-noarch-1.txz

-|   |   |-- tibmachuni-font-ttf-1.901b-noarch-1.txz.asc

-|   |   |-- ttf-indic-fonts-0.4.7.4-noarch-1.txt

-|   |   |-- ttf-indic-fonts-0.4.7.4-noarch-1.txz

-|   |   |-- ttf-indic-fonts-0.4.7.4-noarch-1.txz.asc

-|   |   |-- twm-1.0.6-x86_64-1.txt

-|   |   |-- twm-1.0.6-x86_64-1.txz

-|   |   |-- twm-1.0.6-x86_64-1.txz.asc

-|   |   |-- util-macros-1.13.0-noarch-1.txt

-|   |   |-- util-macros-1.13.0-noarch-1.txz

-|   |   |-- util-macros-1.13.0-noarch-1.txz.asc

-|   |   |-- videoproto-2.3.1-noarch-1.txt

-|   |   |-- videoproto-2.3.1-noarch-1.txz

-|   |   |-- videoproto-2.3.1-noarch-1.txz.asc

-|   |   |-- viewres-1.0.3-x86_64-1.txt

-|   |   |-- viewres-1.0.3-x86_64-1.txz

-|   |   |-- viewres-1.0.3-x86_64-1.txz.asc

-|   |   |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txt

-|   |   |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz

-|   |   |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz.asc

-|   |   |-- x11-skel-7.4-x86_64-2.txt

-|   |   |-- x11-skel-7.4-x86_64-2.txz

-|   |   |-- x11-skel-7.4-x86_64-2.txz.asc

-|   |   |-- x11perf-1.5.3-x86_64-1.txt

-|   |   |-- x11perf-1.5.3-x86_64-1.txz

-|   |   |-- x11perf-1.5.3-x86_64-1.txz.asc

-|   |   |-- xauth-1.0.5-x86_64-1.txt

-|   |   |-- xauth-1.0.5-x86_64-1.txz

-|   |   |-- xauth-1.0.5-x86_64-1.txz.asc

-|   |   |-- xaw3d-20110415git-x86_64-1.txt

-|   |   |-- xaw3d-20110415git-x86_64-1.txz

-|   |   |-- xaw3d-20110415git-x86_64-1.txz.asc

-|   |   |-- xbacklight-1.1.2-x86_64-1.txt

-|   |   |-- xbacklight-1.1.2-x86_64-1.txz

-|   |   |-- xbacklight-1.1.2-x86_64-1.txz.asc

-|   |   |-- xbiff-1.0.3-x86_64-1.txt

-|   |   |-- xbiff-1.0.3-x86_64-1.txz

-|   |   |-- xbiff-1.0.3-x86_64-1.txz.asc

-|   |   |-- xbitmaps-1.1.1-x86_64-1.txt

-|   |   |-- xbitmaps-1.1.1-x86_64-1.txz

-|   |   |-- xbitmaps-1.1.1-x86_64-1.txz.asc

-|   |   |-- xcalc-1.0.4.1-x86_64-1.txt

-|   |   |-- xcalc-1.0.4.1-x86_64-1.txz

-|   |   |-- xcalc-1.0.4.1-x86_64-1.txz.asc

-|   |   |-- xcb-proto-1.6-noarch-1.txt

-|   |   |-- xcb-proto-1.6-noarch-1.txz

-|   |   |-- xcb-proto-1.6-noarch-1.txz.asc

-|   |   |-- xcb-util-0.3.6-x86_64-1.txt

-|   |   |-- xcb-util-0.3.6-x86_64-1.txz

-|   |   |-- xcb-util-0.3.6-x86_64-1.txz.asc

-|   |   |-- xclipboard-1.1.1-x86_64-1.txt

-|   |   |-- xclipboard-1.1.1-x86_64-1.txz

-|   |   |-- xclipboard-1.1.1-x86_64-1.txz.asc

-|   |   |-- xclock-1.0.5-x86_64-1.txt

-|   |   |-- xclock-1.0.5-x86_64-1.txz

-|   |   |-- xclock-1.0.5-x86_64-1.txz.asc

-|   |   |-- xcmiscproto-1.2.1-noarch-1.txt

-|   |   |-- xcmiscproto-1.2.1-noarch-1.txz

-|   |   |-- xcmiscproto-1.2.1-noarch-1.txz.asc

-|   |   |-- xcmsdb-1.0.3-x86_64-1.txt

-|   |   |-- xcmsdb-1.0.3-x86_64-1.txz

-|   |   |-- xcmsdb-1.0.3-x86_64-1.txz.asc

-|   |   |-- xcompmgr-1.1.5-x86_64-2.txt

-|   |   |-- xcompmgr-1.1.5-x86_64-2.txz

-|   |   |-- xcompmgr-1.1.5-x86_64-2.txz.asc

-|   |   |-- xconsole-1.0.4-x86_64-1.txt

-|   |   |-- xconsole-1.0.4-x86_64-1.txz

-|   |   |-- xconsole-1.0.4-x86_64-1.txz.asc

-|   |   |-- xcursor-themes-1.0.3-noarch-1.txt

-|   |   |-- xcursor-themes-1.0.3-noarch-1.txz

-|   |   |-- xcursor-themes-1.0.3-noarch-1.txz.asc

-|   |   |-- xcursorgen-1.0.4-x86_64-1.txt

-|   |   |-- xcursorgen-1.0.4-x86_64-1.txz

-|   |   |-- xcursorgen-1.0.4-x86_64-1.txz.asc

-|   |   |-- xdbedizzy-1.1.0-x86_64-1.txt

-|   |   |-- xdbedizzy-1.1.0-x86_64-1.txz

-|   |   |-- xdbedizzy-1.1.0-x86_64-1.txz.asc

-|   |   |-- xdg-user-dirs-0.13-x86_64-1.txt

-|   |   |-- xdg-user-dirs-0.13-x86_64-1.txz

-|   |   |-- xdg-user-dirs-0.13-x86_64-1.txz.asc

-|   |   |-- xdg-utils-1.1.0_rc1-noarch-1.txt

-|   |   |-- xdg-utils-1.1.0_rc1-noarch-1.txz

-|   |   |-- xdg-utils-1.1.0_rc1-noarch-1.txz.asc

-|   |   |-- xditview-1.0.2-x86_64-1.txt

-|   |   |-- xditview-1.0.2-x86_64-1.txz

-|   |   |-- xditview-1.0.2-x86_64-1.txz.asc

-|   |   |-- xdm-1.1.10-x86_64-1.txt

-|   |   |-- xdm-1.1.10-x86_64-1.txz

-|   |   |-- xdm-1.1.10-x86_64-1.txz.asc

-|   |   |-- xdpyinfo-1.2.0-x86_64-1.txt

-|   |   |-- xdpyinfo-1.2.0-x86_64-1.txz

-|   |   |-- xdpyinfo-1.2.0-x86_64-1.txz.asc

-|   |   |-- xdriinfo-1.0.4-x86_64-1.txt

-|   |   |-- xdriinfo-1.0.4-x86_64-1.txz

-|   |   |-- xdriinfo-1.0.4-x86_64-1.txz.asc

-|   |   |-- xedit-1.2.0-x86_64-1.txt

-|   |   |-- xedit-1.2.0-x86_64-1.txz

-|   |   |-- xedit-1.2.0-x86_64-1.txz.asc

-|   |   |-- xev-1.1.0-x86_64-1.txt

-|   |   |-- xev-1.1.0-x86_64-1.txz

-|   |   |-- xev-1.1.0-x86_64-1.txz.asc

-|   |   |-- xextproto-7.2.0-x86_64-1.txt

-|   |   |-- xextproto-7.2.0-x86_64-1.txz

-|   |   |-- xextproto-7.2.0-x86_64-1.txz.asc

-|   |   |-- xeyes-1.1.1-x86_64-1.txt

-|   |   |-- xeyes-1.1.1-x86_64-1.txz

-|   |   |-- xeyes-1.1.1-x86_64-1.txz.asc

-|   |   |-- xf86-input-acecad-1.4.0-x86_64-2.txt

-|   |   |-- xf86-input-acecad-1.4.0-x86_64-2.txz

-|   |   |-- xf86-input-acecad-1.4.0-x86_64-2.txz.asc

-|   |   |-- xf86-input-aiptek-1.3.1-x86_64-1.txt

-|   |   |-- xf86-input-aiptek-1.3.1-x86_64-1.txz

-|   |   |-- xf86-input-aiptek-1.3.1-x86_64-1.txz.asc

-|   |   |-- xf86-input-evdev-2.6.0-x86_64-1.txt

-|   |   |-- xf86-input-evdev-2.6.0-x86_64-1.txz

-|   |   |-- xf86-input-evdev-2.6.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-joystick-1.5.0-x86_64-1.txt

-|   |   |-- xf86-input-joystick-1.5.0-x86_64-1.txz

-|   |   |-- xf86-input-joystick-1.5.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-keyboard-1.6.0-x86_64-1.txt

-|   |   |-- xf86-input-keyboard-1.6.0-x86_64-1.txz

-|   |   |-- xf86-input-keyboard-1.6.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-mouse-1.7.0-x86_64-1.txt

-|   |   |-- xf86-input-mouse-1.7.0-x86_64-1.txz

-|   |   |-- xf86-input-mouse-1.7.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-penmount-1.4.1-x86_64-2.txt

-|   |   |-- xf86-input-penmount-1.4.1-x86_64-2.txz

-|   |   |-- xf86-input-penmount-1.4.1-x86_64-2.txz.asc

-|   |   |-- xf86-input-synaptics-1.4.0-x86_64-1.txt

-|   |   |-- xf86-input-synaptics-1.4.0-x86_64-1.txz

-|   |   |-- xf86-input-synaptics-1.4.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-vmmouse-12.7.0-x86_64-1.txt

-|   |   |-- xf86-input-vmmouse-12.7.0-x86_64-1.txz

-|   |   |-- xf86-input-vmmouse-12.7.0-x86_64-1.txz.asc

-|   |   |-- xf86-input-void-1.3.1-x86_64-1.txt

-|   |   |-- xf86-input-void-1.3.1-x86_64-1.txz

-|   |   |-- xf86-input-void-1.3.1-x86_64-1.txz.asc

-|   |   |-- xf86-input-wacom-0.10.11-x86_64-1.txt

-|   |   |-- xf86-input-wacom-0.10.11-x86_64-1.txz

-|   |   |-- xf86-input-wacom-0.10.11-x86_64-1.txz.asc

-|   |   |-- xf86-video-apm-1.2.3-x86_64-1.txt

-|   |   |-- xf86-video-apm-1.2.3-x86_64-1.txz

-|   |   |-- xf86-video-apm-1.2.3-x86_64-1.txz.asc

-|   |   |-- xf86-video-ark-0.7.3-x86_64-1.txt

-|   |   |-- xf86-video-ark-0.7.3-x86_64-1.txz

-|   |   |-- xf86-video-ark-0.7.3-x86_64-1.txz.asc

-|   |   |-- xf86-video-ast-0.91.10-x86_64-1.txt

-|   |   |-- xf86-video-ast-0.91.10-x86_64-1.txz

-|   |   |-- xf86-video-ast-0.91.10-x86_64-1.txz.asc

-|   |   |-- xf86-video-ati-6.14.1-x86_64-1.txt

-|   |   |-- xf86-video-ati-6.14.1-x86_64-1.txz

-|   |   |-- xf86-video-ati-6.14.1-x86_64-1.txz.asc

-|   |   |-- xf86-video-chips-1.2.4-x86_64-1.txt

-|   |   |-- xf86-video-chips-1.2.4-x86_64-1.txz

-|   |   |-- xf86-video-chips-1.2.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-cirrus-1.3.2-x86_64-3.txt

-|   |   |-- xf86-video-cirrus-1.3.2-x86_64-3.txz

-|   |   |-- xf86-video-cirrus-1.3.2-x86_64-3.txz.asc

-|   |   |-- xf86-video-dummy-0.3.4-x86_64-1.txt

-|   |   |-- xf86-video-dummy-0.3.4-x86_64-1.txz

-|   |   |-- xf86-video-dummy-0.3.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-glint-1.2.5-x86_64-1.txt

-|   |   |-- xf86-video-glint-1.2.5-x86_64-1.txz

-|   |   |-- xf86-video-glint-1.2.5-x86_64-1.txz.asc

-|   |   |-- xf86-video-i128-1.3.4-x86_64-1.txt

-|   |   |-- xf86-video-i128-1.3.4-x86_64-1.txz

-|   |   |-- xf86-video-i128-1.3.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-i740-1.3.2-x86_64-3.txt

-|   |   |-- xf86-video-i740-1.3.2-x86_64-3.txz

-|   |   |-- xf86-video-i740-1.3.2-x86_64-3.txz.asc

-|   |   |-- xf86-video-intel-2.15.0-x86_64-1.txt

-|   |   |-- xf86-video-intel-2.15.0-x86_64-1.txz

-|   |   |-- xf86-video-intel-2.15.0-x86_64-1.txz.asc

-|   |   |-- xf86-video-mach64-6.8.2-x86_64-3.txt

-|   |   |-- xf86-video-mach64-6.8.2-x86_64-3.txz

-|   |   |-- xf86-video-mach64-6.8.2-x86_64-3.txz.asc

-|   |   |-- xf86-video-mga-1.4.13-x86_64-1.txt

-|   |   |-- xf86-video-mga-1.4.13-x86_64-1.txz

-|   |   |-- xf86-video-mga-1.4.13-x86_64-1.txz.asc

-|   |   |-- xf86-video-neomagic-1.2.5-x86_64-1.txt

-|   |   |-- xf86-video-neomagic-1.2.5-x86_64-1.txz

-|   |   |-- xf86-video-neomagic-1.2.5-x86_64-1.txz.asc

-|   |   |-- xf86-video-nouveau-8bb82312-x86_64-1.txt

-|   |   |-- xf86-video-nouveau-8bb82312-x86_64-1.txz

-|   |   |-- xf86-video-nouveau-8bb82312-x86_64-1.txz.asc

-|   |   |-- xf86-video-nv-2.1.18-x86_64-1.txt

-|   |   |-- xf86-video-nv-2.1.18-x86_64-1.txz

-|   |   |-- xf86-video-nv-2.1.18-x86_64-1.txz.asc

-|   |   |-- xf86-video-openchrome-0.2.904-x86_64-2.txt

-|   |   |-- xf86-video-openchrome-0.2.904-x86_64-2.txz

-|   |   |-- xf86-video-openchrome-0.2.904-x86_64-2.txz.asc

-|   |   |-- xf86-video-r128-6.8.1-x86_64-3.txt

-|   |   |-- xf86-video-r128-6.8.1-x86_64-3.txz

-|   |   |-- xf86-video-r128-6.8.1-x86_64-3.txz.asc

-|   |   |-- xf86-video-radeonhd-1.3.0-x86_64-2.txt

-|   |   |-- xf86-video-radeonhd-1.3.0-x86_64-2.txz

-|   |   |-- xf86-video-radeonhd-1.3.0-x86_64-2.txz.asc

-|   |   |-- xf86-video-rendition-4.2.4-x86_64-1.txt

-|   |   |-- xf86-video-rendition-4.2.4-x86_64-1.txz

-|   |   |-- xf86-video-rendition-4.2.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-s3-0.6.3-x86_64-3.txt

-|   |   |-- xf86-video-s3-0.6.3-x86_64-3.txz

-|   |   |-- xf86-video-s3-0.6.3-x86_64-3.txz.asc

-|   |   |-- xf86-video-s3virge-1.10.4-x86_64-3.txt

-|   |   |-- xf86-video-s3virge-1.10.4-x86_64-3.txz

-|   |   |-- xf86-video-s3virge-1.10.4-x86_64-3.txz.asc

-|   |   |-- xf86-video-savage-2.3.2-x86_64-1.txt

-|   |   |-- xf86-video-savage-2.3.2-x86_64-1.txz

-|   |   |-- xf86-video-savage-2.3.2-x86_64-1.txz.asc

-|   |   |-- xf86-video-siliconmotion-1.7.5-x86_64-1.txt

-|   |   |-- xf86-video-siliconmotion-1.7.5-x86_64-1.txz

-|   |   |-- xf86-video-siliconmotion-1.7.5-x86_64-1.txz.asc

-|   |   |-- xf86-video-sis-0.10.3-x86_64-1.txt

-|   |   |-- xf86-video-sis-0.10.3-x86_64-1.txz

-|   |   |-- xf86-video-sis-0.10.3-x86_64-1.txz.asc

-|   |   |-- xf86-video-sisusb-0.9.4-x86_64-1.txt

-|   |   |-- xf86-video-sisusb-0.9.4-x86_64-1.txz

-|   |   |-- xf86-video-sisusb-0.9.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-tdfx-1.4.3-x86_64-3.txt

-|   |   |-- xf86-video-tdfx-1.4.3-x86_64-3.txz

-|   |   |-- xf86-video-tdfx-1.4.3-x86_64-3.txz.asc

-|   |   |-- xf86-video-tga-1.2.1-x86_64-2.txt

-|   |   |-- xf86-video-tga-1.2.1-x86_64-2.txz

-|   |   |-- xf86-video-tga-1.2.1-x86_64-2.txz.asc

-|   |   |-- xf86-video-trident-1.3.4-x86_64-1.txt

-|   |   |-- xf86-video-trident-1.3.4-x86_64-1.txz

-|   |   |-- xf86-video-trident-1.3.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-tseng-1.2.4-x86_64-1.txt

-|   |   |-- xf86-video-tseng-1.2.4-x86_64-1.txz

-|   |   |-- xf86-video-tseng-1.2.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-v4l-0.2.0-x86_64-4.txt

-|   |   |-- xf86-video-v4l-0.2.0-x86_64-4.txz

-|   |   |-- xf86-video-v4l-0.2.0-x86_64-4.txz.asc

-|   |   |-- xf86-video-vesa-2.3.0-x86_64-3.txt

-|   |   |-- xf86-video-vesa-2.3.0-x86_64-3.txz

-|   |   |-- xf86-video-vesa-2.3.0-x86_64-3.txz.asc

-|   |   |-- xf86-video-vmware-11.0.3-x86_64-1.txt

-|   |   |-- xf86-video-vmware-11.0.3-x86_64-1.txz

-|   |   |-- xf86-video-vmware-11.0.3-x86_64-1.txz.asc

-|   |   |-- xf86-video-voodoo-1.2.4-x86_64-1.txt

-|   |   |-- xf86-video-voodoo-1.2.4-x86_64-1.txz

-|   |   |-- xf86-video-voodoo-1.2.4-x86_64-1.txz.asc

-|   |   |-- xf86-video-xgi-1.6.0-x86_64-1.txt

-|   |   |-- xf86-video-xgi-1.6.0-x86_64-1.txz

-|   |   |-- xf86-video-xgi-1.6.0-x86_64-1.txz.asc

-|   |   |-- xf86bigfontproto-1.2.0-noarch-1.txt

-|   |   |-- xf86bigfontproto-1.2.0-noarch-1.txz

-|   |   |-- xf86bigfontproto-1.2.0-noarch-1.txz.asc

-|   |   |-- xf86dga-1.0.3-x86_64-1.txt

-|   |   |-- xf86dga-1.0.3-x86_64-1.txz

-|   |   |-- xf86dga-1.0.3-x86_64-1.txz.asc

-|   |   |-- xf86dgaproto-2.1-noarch-1.txt

-|   |   |-- xf86dgaproto-2.1-noarch-1.txz

-|   |   |-- xf86dgaproto-2.1-noarch-1.txz.asc

-|   |   |-- xf86driproto-2.1.1-noarch-1.txt

-|   |   |-- xf86driproto-2.1.1-noarch-1.txz

-|   |   |-- xf86driproto-2.1.1-noarch-1.txz.asc

-|   |   |-- xf86miscproto-0.9.3-noarch-1.txt

-|   |   |-- xf86miscproto-0.9.3-noarch-1.txz

-|   |   |-- xf86miscproto-0.9.3-noarch-1.txz.asc

-|   |   |-- xf86vidmodeproto-2.3.1-noarch-1.txt

-|   |   |-- xf86vidmodeproto-2.3.1-noarch-1.txz

-|   |   |-- xf86vidmodeproto-2.3.1-noarch-1.txz.asc

-|   |   |-- xfd-1.1.0-x86_64-1.txt

-|   |   |-- xfd-1.1.0-x86_64-1.txz

-|   |   |-- xfd-1.1.0-x86_64-1.txz.asc

-|   |   |-- xfontsel-1.0.3-x86_64-1.txt

-|   |   |-- xfontsel-1.0.3-x86_64-1.txz

-|   |   |-- xfontsel-1.0.3-x86_64-1.txz.asc

-|   |   |-- xfs-1.1.1-x86_64-1.txt

-|   |   |-- xfs-1.1.1-x86_64-1.txz

-|   |   |-- xfs-1.1.1-x86_64-1.txz.asc

-|   |   |-- xfsinfo-1.0.3-x86_64-1.txt

-|   |   |-- xfsinfo-1.0.3-x86_64-1.txz

-|   |   |-- xfsinfo-1.0.3-x86_64-1.txz.asc

-|   |   |-- xgamma-1.0.4-x86_64-1.txt

-|   |   |-- xgamma-1.0.4-x86_64-1.txz

-|   |   |-- xgamma-1.0.4-x86_64-1.txz.asc

-|   |   |-- xgc-1.0.3-x86_64-1.txt

-|   |   |-- xgc-1.0.3-x86_64-1.txz

-|   |   |-- xgc-1.0.3-x86_64-1.txz.asc

-|   |   |-- xhost-1.0.4-x86_64-1.txt

-|   |   |-- xhost-1.0.4-x86_64-1.txz

-|   |   |-- xhost-1.0.4-x86_64-1.txz.asc

-|   |   |-- xineramaproto-1.2.1-noarch-1.txt

-|   |   |-- xineramaproto-1.2.1-noarch-1.txz

-|   |   |-- xineramaproto-1.2.1-noarch-1.txz.asc

-|   |   |-- xinit-1.3.0-x86_64-1.txt

-|   |   |-- xinit-1.3.0-x86_64-1.txz

-|   |   |-- xinit-1.3.0-x86_64-1.txz.asc

-|   |   |-- xinput-1.5.3-x86_64-1.txt

-|   |   |-- xinput-1.5.3-x86_64-1.txz

-|   |   |-- xinput-1.5.3-x86_64-1.txz.asc

-|   |   |-- xkbcomp-1.2.1-x86_64-1.txt

-|   |   |-- xkbcomp-1.2.1-x86_64-1.txz

-|   |   |-- xkbcomp-1.2.1-x86_64-1.txz.asc

-|   |   |-- xkbevd-1.1.2-x86_64-1.txt

-|   |   |-- xkbevd-1.1.2-x86_64-1.txz

-|   |   |-- xkbevd-1.1.2-x86_64-1.txz.asc

-|   |   |-- xkbprint-1.0.3-x86_64-1.txt

-|   |   |-- xkbprint-1.0.3-x86_64-1.txz

-|   |   |-- xkbprint-1.0.3-x86_64-1.txz.asc

-|   |   |-- xkbutils-1.0.3-x86_64-1.txt

-|   |   |-- xkbutils-1.0.3-x86_64-1.txz

-|   |   |-- xkbutils-1.0.3-x86_64-1.txz.asc

-|   |   |-- xkeyboard-config-2.2.1-noarch-1.txt

-|   |   |-- xkeyboard-config-2.2.1-noarch-1.txz

-|   |   |-- xkeyboard-config-2.2.1-noarch-1.txz.asc

-|   |   |-- xkill-1.0.3-x86_64-1.txt

-|   |   |-- xkill-1.0.3-x86_64-1.txz

-|   |   |-- xkill-1.0.3-x86_64-1.txz.asc

-|   |   |-- xload-1.1.0-x86_64-1.txt

-|   |   |-- xload-1.1.0-x86_64-1.txz

-|   |   |-- xload-1.1.0-x86_64-1.txz.asc

-|   |   |-- xlogo-1.0.3-x86_64-1.txt

-|   |   |-- xlogo-1.0.3-x86_64-1.txz

-|   |   |-- xlogo-1.0.3-x86_64-1.txz.asc

-|   |   |-- xlsatoms-1.1.0-x86_64-1.txt

-|   |   |-- xlsatoms-1.1.0-x86_64-1.txz

-|   |   |-- xlsatoms-1.1.0-x86_64-1.txz.asc

-|   |   |-- xlsclients-1.1.1-x86_64-1.txt

-|   |   |-- xlsclients-1.1.1-x86_64-1.txz

-|   |   |-- xlsclients-1.1.1-x86_64-1.txz.asc

-|   |   |-- xlsfonts-1.0.3-x86_64-1.txt

-|   |   |-- xlsfonts-1.0.3-x86_64-1.txz

-|   |   |-- xlsfonts-1.0.3-x86_64-1.txz.asc

-|   |   |-- xmag-1.0.4-x86_64-1.txt

-|   |   |-- xmag-1.0.4-x86_64-1.txz

-|   |   |-- xmag-1.0.4-x86_64-1.txz.asc

-|   |   |-- xman-1.1.1-x86_64-1.txt

-|   |   |-- xman-1.1.1-x86_64-1.txz

-|   |   |-- xman-1.1.1-x86_64-1.txz.asc

-|   |   |-- xmessage-1.0.3-x86_64-1.txt

-|   |   |-- xmessage-1.0.3-x86_64-1.txz

-|   |   |-- xmessage-1.0.3-x86_64-1.txz.asc

-|   |   |-- xmh-1.0.2-x86_64-1.txt

-|   |   |-- xmh-1.0.2-x86_64-1.txz

-|   |   |-- xmh-1.0.2-x86_64-1.txz.asc

-|   |   |-- xmodmap-1.0.5-x86_64-1.txt

-|   |   |-- xmodmap-1.0.5-x86_64-1.txz

-|   |   |-- xmodmap-1.0.5-x86_64-1.txz.asc

-|   |   |-- xmore-1.0.2-x86_64-1.txt

-|   |   |-- xmore-1.0.2-x86_64-1.txz

-|   |   |-- xmore-1.0.2-x86_64-1.txz.asc

-|   |   |-- xorg-cf-files-1.0.4-noarch-1.txt

-|   |   |-- xorg-cf-files-1.0.4-noarch-1.txz

-|   |   |-- xorg-cf-files-1.0.4-noarch-1.txz.asc

-|   |   |-- xorg-docs-1.6-noarch-1.txt

-|   |   |-- xorg-docs-1.6-noarch-1.txz

-|   |   |-- xorg-docs-1.6-noarch-1.txz.asc

-|   |   |-- xorg-server-1.9.5-x86_64-1.txt

-|   |   |-- xorg-server-1.9.5-x86_64-1.txz

-|   |   |-- xorg-server-1.9.5-x86_64-1.txz.asc

-|   |   |-- xorg-server-xephyr-1.9.5-x86_64-1.txt

-|   |   |-- xorg-server-xephyr-1.9.5-x86_64-1.txz

-|   |   |-- xorg-server-xephyr-1.9.5-x86_64-1.txz.asc

-|   |   |-- xorg-server-xnest-1.9.5-x86_64-1.txt

-|   |   |-- xorg-server-xnest-1.9.5-x86_64-1.txz

-|   |   |-- xorg-server-xnest-1.9.5-x86_64-1.txz.asc

-|   |   |-- xorg-server-xvfb-1.9.5-x86_64-1.txt

-|   |   |-- xorg-server-xvfb-1.9.5-x86_64-1.txz

-|   |   |-- xorg-server-xvfb-1.9.5-x86_64-1.txz.asc

-|   |   |-- xorg-sgml-doctools-1.7-x86_64-1.txt

-|   |   |-- xorg-sgml-doctools-1.7-x86_64-1.txz

-|   |   |-- xorg-sgml-doctools-1.7-x86_64-1.txz.asc

-|   |   |-- xpr-1.0.3-x86_64-1.txt

-|   |   |-- xpr-1.0.3-x86_64-1.txz

-|   |   |-- xpr-1.0.3-x86_64-1.txz.asc

-|   |   |-- xprop-1.2.0-x86_64-1.txt

-|   |   |-- xprop-1.2.0-x86_64-1.txz

-|   |   |-- xprop-1.2.0-x86_64-1.txz.asc

-|   |   |-- xproto-7.0.21-noarch-1.txt

-|   |   |-- xproto-7.0.21-noarch-1.txz

-|   |   |-- xproto-7.0.21-noarch-1.txz.asc

-|   |   |-- xpyb-1.2-x86_64-1.txt

-|   |   |-- xpyb-1.2-x86_64-1.txz

-|   |   |-- xpyb-1.2-x86_64-1.txz.asc

-|   |   |-- xrandr-1.3.4-x86_64-1.txt

-|   |   |-- xrandr-1.3.4-x86_64-1.txz

-|   |   |-- xrandr-1.3.4-x86_64-1.txz.asc

-|   |   |-- xrdb-1.0.9-x86_64-1.txt

-|   |   |-- xrdb-1.0.9-x86_64-1.txz

-|   |   |-- xrdb-1.0.9-x86_64-1.txz.asc

-|   |   |-- xrefresh-1.0.4-x86_64-1.txt

-|   |   |-- xrefresh-1.0.4-x86_64-1.txz

-|   |   |-- xrefresh-1.0.4-x86_64-1.txz.asc

-|   |   |-- xscope-1.3-x86_64-1.txt

-|   |   |-- xscope-1.3-x86_64-1.txz

-|   |   |-- xscope-1.3-x86_64-1.txz.asc

-|   |   |-- xset-1.2.1-x86_64-1.txt

-|   |   |-- xset-1.2.1-x86_64-1.txz

-|   |   |-- xset-1.2.1-x86_64-1.txz.asc

-|   |   |-- xsetroot-1.1.0-x86_64-1.txt

-|   |   |-- xsetroot-1.1.0-x86_64-1.txz

-|   |   |-- xsetroot-1.1.0-x86_64-1.txz.asc

-|   |   |-- xsm-1.0.2-x86_64-1.txt

-|   |   |-- xsm-1.0.2-x86_64-1.txz

-|   |   |-- xsm-1.0.2-x86_64-1.txz.asc

-|   |   |-- xstdcmap-1.0.2-x86_64-1.txt

-|   |   |-- xstdcmap-1.0.2-x86_64-1.txz

-|   |   |-- xstdcmap-1.0.2-x86_64-1.txz.asc

-|   |   |-- xterm-267-x86_64-1.txt

-|   |   |-- xterm-267-x86_64-1.txz

-|   |   |-- xterm-267-x86_64-1.txz.asc

-|   |   |-- xtrans-1.2.6-noarch-1.txt

-|   |   |-- xtrans-1.2.6-noarch-1.txz

-|   |   |-- xtrans-1.2.6-noarch-1.txz.asc

-|   |   |-- xvidtune-1.0.2-x86_64-1.txt

-|   |   |-- xvidtune-1.0.2-x86_64-1.txz

-|   |   |-- xvidtune-1.0.2-x86_64-1.txz.asc

-|   |   |-- xvinfo-1.1.1-x86_64-1.txt

-|   |   |-- xvinfo-1.1.1-x86_64-1.txz

-|   |   |-- xvinfo-1.1.1-x86_64-1.txz.asc

-|   |   |-- xwd-1.0.4-x86_64-1.txt

-|   |   |-- xwd-1.0.4-x86_64-1.txz

-|   |   |-- xwd-1.0.4-x86_64-1.txz.asc

-|   |   |-- xwininfo-1.1.1-x86_64-1.txt

-|   |   |-- xwininfo-1.1.1-x86_64-1.txz

-|   |   |-- xwininfo-1.1.1-x86_64-1.txz.asc

-|   |   |-- xwud-1.0.3-x86_64-1.txt

-|   |   |-- xwud-1.0.3-x86_64-1.txz

-|   |   `-- xwud-1.0.3-x86_64-1.txz.asc

-|   |-- xap

-|   |   |-- MPlayer-20101218-x86_64-1.txt

-|   |   |-- MPlayer-20101218-x86_64-1.txz

-|   |   |-- MPlayer-20101218-x86_64-1.txz.asc

-|   |   |-- audacious-2.4.4-x86_64-1.txt

-|   |   |-- audacious-2.4.4-x86_64-1.txz

-|   |   |-- audacious-2.4.4-x86_64-1.txz.asc

-|   |   |-- audacious-plugins-2.4.4-x86_64-1.txt

-|   |   |-- audacious-plugins-2.4.4-x86_64-1.txz

-|   |   |-- audacious-plugins-2.4.4-x86_64-1.txz.asc

-|   |   |-- blackbox-0.70.1-x86_64-4.txt

-|   |   |-- blackbox-0.70.1-x86_64-4.txz

-|   |   |-- blackbox-0.70.1-x86_64-4.txz.asc

-|   |   |-- blueman-r708-x86_64-1.txt

-|   |   |-- blueman-r708-x86_64-1.txz

-|   |   |-- blueman-r708-x86_64-1.txz.asc

-|   |   |-- electricsheep-20090306-x86_64-3.txt

-|   |   |-- electricsheep-20090306-x86_64-3.txz

-|   |   |-- electricsheep-20090306-x86_64-3.txz.asc

-|   |   |-- fluxbox-1.3.1-x86_64-1.txt

-|   |   |-- fluxbox-1.3.1-x86_64-1.txz

-|   |   |-- fluxbox-1.3.1-x86_64-1.txz.asc

-|   |   |-- fvwm-2.4.20-x86_64-2.txt

-|   |   |-- fvwm-2.4.20-x86_64-2.txz

-|   |   |-- fvwm-2.4.20-x86_64-2.txz.asc

-|   |   |-- geeqie-1.0-x86_64-3.txt

-|   |   |-- geeqie-1.0-x86_64-3.txz

-|   |   |-- geeqie-1.0-x86_64-3.txz.asc

-|   |   |-- gftp-2.0.19-x86_64-2.txt

-|   |   |-- gftp-2.0.19-x86_64-2.txz

-|   |   |-- gftp-2.0.19-x86_64-2.txz.asc

-|   |   |-- gimp-2.6.11-x86_64-3.txt

-|   |   |-- gimp-2.6.11-x86_64-3.txz

-|   |   |-- gimp-2.6.11-x86_64-3.txz.asc

-|   |   |-- gkrellm-2.3.5-x86_64-1.txt

-|   |   |-- gkrellm-2.3.5-x86_64-1.txz

-|   |   |-- gkrellm-2.3.5-x86_64-1.txz.asc

-|   |   |-- gnuchess-5.08-x86_64-2.txt

-|   |   |-- gnuchess-5.08-x86_64-2.txz

-|   |   |-- gnuchess-5.08-x86_64-2.txz.asc

-|   |   |-- gnuplot-4.4.3-x86_64-1.txt

-|   |   |-- gnuplot-4.4.3-x86_64-1.txz

-|   |   |-- gnuplot-4.4.3-x86_64-1.txz.asc

-|   |   |-- gucharmap-2.33.2-x86_64-1.txt

-|   |   |-- gucharmap-2.33.2-x86_64-1.txz

-|   |   |-- gucharmap-2.33.2-x86_64-1.txz.asc

-|   |   |-- gv-3.7.1-x86_64-2.txt

-|   |   |-- gv-3.7.1-x86_64-2.txz

-|   |   |-- gv-3.7.1-x86_64-2.txz.asc

-|   |   |-- imagemagick-6.6.6_10-x86_64-1.txt

-|   |   |-- imagemagick-6.6.6_10-x86_64-1.txz

-|   |   |-- imagemagick-6.6.6_10-x86_64-1.txz.asc

-|   |   |-- install-packages

-|   |   |-- install.end

-|   |   |-- maketag

-|   |   |-- maketag.ez

-|   |   |-- mozilla-firefox-4.0-x86_64-2.txt

-|   |   |-- mozilla-firefox-4.0-x86_64-2.txz

-|   |   |-- mozilla-firefox-4.0-x86_64-2.txz.asc

-|   |   |-- mozilla-thunderbird-3.1.9-x86_64-2.txt

-|   |   |-- mozilla-thunderbird-3.1.9-x86_64-2.txz

-|   |   |-- mozilla-thunderbird-3.1.9-x86_64-2.txz.asc

-|   |   |-- pan-0.134-x86_64-1.txt

-|   |   |-- pan-0.134-x86_64-1.txz

-|   |   |-- pan-0.134-x86_64-1.txz.asc

-|   |   |-- pidgin-2.7.11-x86_64-1.txt

-|   |   |-- pidgin-2.7.11-x86_64-1.txz

-|   |   |-- pidgin-2.7.11-x86_64-1.txz.asc

-|   |   |-- rdesktop-1.6.0-x86_64-2.txt

-|   |   |-- rdesktop-1.6.0-x86_64-2.txz

-|   |   |-- rdesktop-1.6.0-x86_64-2.txz.asc

-|   |   |-- rxvt-2.7.10-x86_64-4.txt

-|   |   |-- rxvt-2.7.10-x86_64-4.txz

-|   |   |-- rxvt-2.7.10-x86_64-4.txz.asc

-|   |   |-- sane-1.0.22-x86_64-2.txt

-|   |   |-- sane-1.0.22-x86_64-2.txz

-|   |   |-- sane-1.0.22-x86_64-2.txz.asc

-|   |   |-- seamonkey-2.1b3-x86_64-2.txt

-|   |   |-- seamonkey-2.1b3-x86_64-2.txz

-|   |   |-- seamonkey-2.1b3-x86_64-2.txz.asc

-|   |   |-- seyon-2.20c-x86_64-3.txt

-|   |   |-- seyon-2.20c-x86_64-3.txz

-|   |   |-- seyon-2.20c-x86_64-3.txz.asc

-|   |   |-- tagfile

-|   |   |-- thunar-volman-0.3.80-x86_64-1.txt

-|   |   |-- thunar-volman-0.3.80-x86_64-1.txz

-|   |   |-- thunar-volman-0.3.80-x86_64-1.txz.asc

-|   |   |-- vim-gvim-7.3.154-x86_64-1.txt

-|   |   |-- vim-gvim-7.3.154-x86_64-1.txz

-|   |   |-- vim-gvim-7.3.154-x86_64-1.txz.asc

-|   |   |-- windowmaker-20060427cvs-x86_64-4.txt

-|   |   |-- windowmaker-20060427cvs-x86_64-4.txz

-|   |   |-- windowmaker-20060427cvs-x86_64-4.txz.asc

-|   |   |-- x11-ssh-askpass-1.2.4.1-x86_64-2.txt

-|   |   |-- x11-ssh-askpass-1.2.4.1-x86_64-2.txz

-|   |   |-- x11-ssh-askpass-1.2.4.1-x86_64-2.txz.asc

-|   |   |-- x3270-3.3.7p8-x86_64-1.txt

-|   |   |-- x3270-3.3.7p8-x86_64-1.txz

-|   |   |-- x3270-3.3.7p8-x86_64-1.txz.asc

-|   |   |-- xaos-3.5-x86_64-1.txt

-|   |   |-- xaos-3.5-x86_64-1.txz

-|   |   |-- xaos-3.5-x86_64-1.txz.asc

-|   |   |-- xchat-2.8.8-x86_64-3.txt

-|   |   |-- xchat-2.8.8-x86_64-3.txz

-|   |   |-- xchat-2.8.8-x86_64-3.txz.asc

-|   |   |-- xfce-4.6.2-x86_64-5.txt

-|   |   |-- xfce-4.6.2-x86_64-5.txz

-|   |   |-- xfce-4.6.2-x86_64-5.txz.asc

-|   |   |-- xfce4-notifyd-0.1.1-x86_64-1.txt

-|   |   |-- xfce4-notifyd-0.1.1-x86_64-1.txz

-|   |   |-- xfce4-notifyd-0.1.1-x86_64-1.txz.asc

-|   |   |-- xfce4-power-manager-0.8.5-x86_64-1.txt

-|   |   |-- xfce4-power-manager-0.8.5-x86_64-1.txz

-|   |   |-- xfce4-power-manager-0.8.5-x86_64-1.txz.asc

-|   |   |-- xfractint-20.04p09-x86_64-1.txt

-|   |   |-- xfractint-20.04p09-x86_64-1.txz

-|   |   |-- xfractint-20.04p09-x86_64-1.txz.asc

-|   |   |-- xgames-0.3-x86_64-4.txt

-|   |   |-- xgames-0.3-x86_64-4.txz

-|   |   |-- xgames-0.3-x86_64-4.txz.asc

-|   |   |-- xine-lib-1.1.19-x86_64-1.txt

-|   |   |-- xine-lib-1.1.19-x86_64-1.txz

-|   |   |-- xine-lib-1.1.19-x86_64-1.txz.asc

-|   |   |-- xine-ui-0.99.5-x86_64-3.txt

-|   |   |-- xine-ui-0.99.5-x86_64-3.txz

-|   |   |-- xine-ui-0.99.5-x86_64-3.txz.asc

-|   |   |-- xlockmore-5.32-x86_64-1.txt

-|   |   |-- xlockmore-5.32-x86_64-1.txz

-|   |   |-- xlockmore-5.32-x86_64-1.txz.asc

-|   |   |-- xmms-1.2.11-x86_64-4.txt

-|   |   |-- xmms-1.2.11-x86_64-4.txz

-|   |   |-- xmms-1.2.11-x86_64-4.txz.asc

-|   |   |-- xpaint-2.8.16-x86_64-1.txt

-|   |   |-- xpaint-2.8.16-x86_64-1.txz

-|   |   |-- xpaint-2.8.16-x86_64-1.txz.asc

-|   |   |-- xpdf-3.02pl6-x86_64-3.txt

-|   |   |-- xpdf-3.02pl6-x86_64-3.txz

-|   |   |-- xpdf-3.02pl6-x86_64-3.txz.asc

-|   |   |-- xsane-0.998-x86_64-1.txt

-|   |   |-- xsane-0.998-x86_64-1.txz

-|   |   |-- xsane-0.998-x86_64-1.txz.asc

-|   |   |-- xscreensaver-5.12-x86_64-1.txt

-|   |   |-- xscreensaver-5.12-x86_64-1.txz

-|   |   |-- xscreensaver-5.12-x86_64-1.txz.asc

-|   |   |-- xv-3.10a-x86_64-6.txt

-|   |   |-- xv-3.10a-x86_64-6.txz

-|   |   |-- xv-3.10a-x86_64-6.txz.asc

-|   |   |-- xxgdb-1.12-x86_64-3.txt

-|   |   |-- xxgdb-1.12-x86_64-3.txz

-|   |   `-- xxgdb-1.12-x86_64-3.txz.asc

-|   `-- y

-|       |-- bsd-games-2.13-x86_64-11.txt

-|       |-- bsd-games-2.13-x86_64-11.txz

-|       |-- bsd-games-2.13-x86_64-11.txz.asc

-|       |-- install-packages

-|       |-- install.end

-|       |-- maketag

-|       |-- maketag.ez

-|       `-- tagfile

-|-- source

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   |-- a

-|   |   |-- aaa_base

-|   |   |   |-- _aaa_base.tar.gz

-|   |   |   |-- aaa_base.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- slackware-version

-|   |   |-- aaa_elflibs

-|   |   |   |-- aaa_elflibs.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- symlinks-to-tracked-libs

-|   |   |   `-- tracked-files

-|   |   |-- aaa_terminfo

-|   |   |   |-- aaa_terminfo.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- acl

-|   |   |   |-- acl-2.2.50.src.tar.gz

-|   |   |   |-- acl.SlackBuild

-|   |   |   |-- acl.destdir.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- acpid

-|   |   |   |-- acpi_handler.sh.gz

-|   |   |   |-- acpid-2.0.9.tar.gz

-|   |   |   |-- acpid.SlackBuild

-|   |   |   |-- default.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.acpid.gz

-|   |   |   `-- slack-desc

-|   |   |-- apmd

-|   |   |   |-- apmd-3.2.2.tar.bz2

-|   |   |   |-- apmd.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- attr

-|   |   |   |-- attr-2.4.45.src.tar.gz

-|   |   |   |-- attr-2.4.45.src.tar.gz.sig

-|   |   |   |-- attr.SlackBuild

-|   |   |   |-- attr.destdir.diff.gz

-|   |   |   |-- build

-|   |   |   `-- slack-desc

-|   |   |-- bash

-|   |   |   |-- bash-4.1-patches

-|   |   |   |   |-- bash41-001

-|   |   |   |   |-- bash41-001.sig

-|   |   |   |   |-- bash41-002

-|   |   |   |   |-- bash41-002.sig

-|   |   |   |   |-- bash41-003

-|   |   |   |   |-- bash41-003.sig

-|   |   |   |   |-- bash41-004

-|   |   |   |   |-- bash41-004.sig

-|   |   |   |   |-- bash41-005

-|   |   |   |   |-- bash41-005.sig

-|   |   |   |   |-- bash41-006

-|   |   |   |   |-- bash41-006.sig

-|   |   |   |   |-- bash41-007

-|   |   |   |   |-- bash41-007.sig

-|   |   |   |   |-- bash41-008

-|   |   |   |   |-- bash41-008.sig

-|   |   |   |   |-- bash41-009

-|   |   |   |   |-- bash41-009.sig

-|   |   |   |   |-- bash41-010

-|   |   |   |   `-- bash41-010.sig

-|   |   |   |-- bash-4.1.tar.xz

-|   |   |   |-- bash.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- bin

-|   |   |   |-- banners.tar.gz

-|   |   |   |-- bin.SlackBuild

-|   |   |   |-- debianutils_2.7.dsc

-|   |   |   |-- debianutils_2.7.tar.gz

-|   |   |   |-- fbset-2.1.tar.gz

-|   |   |   |-- scripts

-|   |   |   |   |-- diskcopy.gz

-|   |   |   |   `-- xx.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- todos.tar.gz

-|   |   |-- btrfs-progs

-|   |   |   |-- btrfs-progs-20110327.tar.xz

-|   |   |   |-- btrfs-progs.SlackBuild

-|   |   |   |-- fsck.btrfs

-|   |   |   `-- slack-desc

-|   |   |-- bzip2

-|   |   |   |-- bzip2-1.0.6.tar.gz

-|   |   |   |-- bzip2.SlackBuild

-|   |   |   |-- bzip2.saneso.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- coreutils

-|   |   |   |-- DIR_COLORS.gz

-|   |   |   |-- coreutils-8.11.tar.xz

-|   |   |   |-- coreutils-8.11.tar.xz.sig

-|   |   |   |-- coreutils-dircolors.csh.gz

-|   |   |   |-- coreutils-dircolors.sh.gz

-|   |   |   |-- coreutils.SlackBuild

-|   |   |   |-- coreutils.uname.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- cpio

-|   |   |   |-- cpio-2.11.tar.xz

-|   |   |   |-- cpio.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cpufrequtils

-|   |   |   |-- cpufrequtils-008.tar.bz2

-|   |   |   |-- cpufrequtils-008.tar.bz2.sign

-|   |   |   |-- cpufrequtils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cryptsetup

-|   |   |   |-- cryptsetup-1.2.0.tar.bz2

-|   |   |   |-- cryptsetup-1.2.0.tar.bz2.asc

-|   |   |   |-- cryptsetup.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cups

-|   |   |   |-- cups-1.4.6-source.tar.bz2

-|   |   |   |-- cups-samba-5.0rc3.tar.gz

-|   |   |   |-- cups-windows-6.0-source.tar.bz2

-|   |   |   |-- cups.SlackBuild

-|   |   |   |-- cups.fix_broken_locking.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- usb-backend-both-usblp-and-libusb.dpatch.gz

-|   |   |-- cxxlibs

-|   |   |   |-- cxxlibs.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- symlinks-to-tracked-libs

-|   |   |   `-- symlinks-to-tracked-libs64

-|   |   |-- dbus

-|   |   |   |-- dbus-1.4.1.tar.xz

-|   |   |   |-- dbus-1.4.x-allow_root_globally.diff.gz

-|   |   |   |-- dbus.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.messagebus.gz

-|   |   |   `-- slack-desc

-|   |   |-- dcron

-|   |   |   |-- crontab.c.O_EXCL.diff.gz

-|   |   |   |-- crontab.root.gz

-|   |   |   |-- dcron-4.4.tar.gz

-|   |   |   |-- dcron.SlackBuild

-|   |   |   |-- dcron.manpage.paths.diff.gz

-|   |   |   |-- defs.h.TMPDIR.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- run-parts.8.gz

-|   |   |   |-- run-parts.gz

-|   |   |   `-- slack-desc

-|   |   |-- devs

-|   |   |   |-- _devs.tar.gz

-|   |   |   |-- devs.SlackBuild

-|   |   |   |-- makedev.hd.diff.gz

-|   |   |   |-- makedev_2.3.1-46.2.diff.gz

-|   |   |   |-- makedev_2.3.1.hd.diff.gz

-|   |   |   |-- makedev_2.3.1.orig.tar.gz

-|   |   |   |-- makedev_2.3.1.slack.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- dialog

-|   |   |   |-- dialog-1.1-20100428.tar.xz

-|   |   |   |-- dialog.SlackBuild

-|   |   |   |-- dialog.smaller.min.height.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- dosfstools

-|   |   |   |-- dosfstools-3.0.11.tar.bz2

-|   |   |   |-- dosfstools-3.0.11.tar.bz2.sign

-|   |   |   |-- dosfstools.SlackBuild

-|   |   |   |-- dosfstools.paths.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- e2fsprogs

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- e2fsprogs-1.41.14.tar.xz

-|   |   |   |-- e2fsprogs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ed

-|   |   |   |-- ed-1.4.tar.xz

-|   |   |   |-- ed.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- eject

-|   |   |   |-- eject-2.1.5.tar.bz2

-|   |   |   |-- eject.SlackBuild

-|   |   |   |-- eject.spaces.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- elvis

-|   |   |   |-- elvis-2.2_0.tar.bz2

-|   |   |   |-- elvis.SlackBuild

-|   |   |   |-- elvis.clr

-|   |   |   |-- elvis.clr.orig

-|   |   |   |-- elvis.ref.c.getline.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- etc

-|   |   |   |-- _etc.tar.gz

-|   |   |   |-- etc.SlackBuild

-|   |   |   |-- nsswitch.conf.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- termcap-BSD.gz

-|   |   |-- file

-|   |   |   |-- file-5.05.tar.xz

-|   |   |   |-- file.SlackBuild

-|   |   |   |-- file.crdaregbin.magic.gz

-|   |   |   |-- file.etc.file.diff.gz

-|   |   |   |-- file.quiet.diff.gz

-|   |   |   |-- file.short.diff.gz

-|   |   |   |-- file.xz.magic.gz

-|   |   |   |-- file.zisofs.magic.gz

-|   |   |   `-- slack-desc

-|   |   |-- findutils

-|   |   |   |-- findutils-4.4.2.tar.xz

-|   |   |   |-- findutils.SlackBuild

-|   |   |   |-- findutils.no.default.options.warnings.diff.gz

-|   |   |   |-- findutils.nolocate.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- floppy

-|   |   |   |-- fdutils-5.4-20020222.diff.gz

-|   |   |   |-- fdutils-5.4.tar.gz

-|   |   |   |-- fdutils.mediaprm.diff.gz

-|   |   |   |-- floppy.SlackBuild

-|   |   |   |-- mediaprm

-|   |   |   |-- mtools-3.9.8.tar.gz

-|   |   |   |-- mtools.conf

-|   |   |   `-- slack-desc

-|   |   |-- gawk

-|   |   |   |-- gawk-3.1.8.tar.xz

-|   |   |   |-- gawk.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gdisk

-|   |   |   |-- gdisk-0.6.14.tar.xz

-|   |   |   |-- gdisk.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- genpower

-|   |   |   |-- genpower-1.0.5.tar.gz

-|   |   |   |-- genpower.SlackBuild

-|   |   |   |-- genpower.halt.diff.gz

-|   |   |   |-- genpower.var.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- gettext

-|   |   |   |-- gettext-0.18.1.1.tar.bz2

-|   |   |   |-- gettext-tools.SlackBuild

-|   |   |   |-- gettext.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- slack-desc.gettext-tools

-|   |   |-- getty-ps

-|   |   |   |-- getty-ps.SlackBuild

-|   |   |   |-- getty.bugfixes.diff.gz

-|   |   |   |-- getty_ps-2.1.0.lsm

-|   |   |   |-- getty_ps-2.1.0b.tar.gz

-|   |   |   `-- slack-desc

-|   |   |-- gpm

-|   |   |   |-- gpm-1.20.1-consolename.patch.gz

-|   |   |   |-- gpm-1.20.1-gpmopen.patch.gz

-|   |   |   |-- gpm-1.20.1-idie.patch.gz

-|   |   |   |-- gpm-1.20.1-input-defines.diff.gz

-|   |   |   |-- gpm-1.20.1-input.patch.gz

-|   |   |   |-- gpm-1.20.1-lib-silent.patch.gz

-|   |   |   |-- gpm-1.20.1-math.patch.gz

-|   |   |   |-- gpm-1.20.1-multilib.patch.gz

-|   |   |   |-- gpm-1.20.1-no-console-error.patch.gz

-|   |   |   |-- gpm-1.20.1-nodebug.patch.gz

-|   |   |   |-- gpm-1.20.1-subscript.patch.gz

-|   |   |   |-- gpm-1.20.1-weak-wgetch.patch.gz

-|   |   |   |-- gpm-1.20.1.send-noise-to-syslogs.diff.gz

-|   |   |   |-- gpm-1.20.1.tar.bz2

-|   |   |   |-- gpm-evdev-cumulative.patch.gz

-|   |   |   |-- gpm.SlackBuild

-|   |   |   |-- gpm.evdevmakefile.patch.gz

-|   |   |   |-- inputattach.c.gz

-|   |   |   |-- mouseconfig.gz

-|   |   |   |-- setup.mouse.gz

-|   |   |   `-- slack-desc

-|   |   |-- grep

-|   |   |   |-- grep-2.7.tar.xz

-|   |   |   |-- grep-2.7.tar.xz.sig

-|   |   |   |-- grep.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gzip

-|   |   |   |-- gzip-1.4.tar.xz

-|   |   |   |-- gzip-1.4.tar.xz.sig

-|   |   |   |-- gzip.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- hdparm

-|   |   |   |-- hdparm-9.37.tar.gz

-|   |   |   |-- hdparm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- infozip

-|   |   |   |-- infozip.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- unzip60.tar.xz

-|   |   |   `-- zip30.tar.xz

-|   |   |-- inotify-tools

-|   |   |   |-- inotify-tools-3.14.tar.xz

-|   |   |   |-- inotify-tools.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- jfsutils

-|   |   |   |-- jfsutils-1.1.15.tar.xz

-|   |   |   |-- jfsutils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kbd

-|   |   |   |-- kbd.SlackBuild

-|   |   |   |-- setconsolefont

-|   |   |   |-- setup.setconsolefont

-|   |   |   |-- slack-desc

-|   |   |   `-- sources

-|   |   |       |-- extraf.tgz

-|   |   |       |-- kbd-1.15-keycodes-man.patch.gz

-|   |   |       |-- kbd-1.15-resizecon-x86_64.patch.gz

-|   |   |       |-- kbd-1.15-unicode_start.patch.gz

-|   |   |       |-- kbd-1.15.2-po.patch.gz

-|   |   |       |-- kbd-1.15.2.tar.bz2

-|   |   |       |-- kbd-1.15.2.tar.bz2.sign

-|   |   |       |-- kbd-latarcyrheb-16-fixed.tar.bz2

-|   |   |       |-- kbd-latsun-fonts.tar.bz2

-|   |   |       |-- nl.euro.diff.gz

-|   |   |       |-- ro_maps.tar.bz2

-|   |   |       |-- speakup-jfw.tar.gz

-|   |   |       `-- speakupmap.map.gz

-|   |   |-- less

-|   |   |   |-- less-443.tar.xz

-|   |   |   |-- less.SlackBuild

-|   |   |   |-- less.sysconfdir.diff.gz

-|   |   |   |-- lesspipe.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- lha

-|   |   |   |-- lha-114i.tar.gz

-|   |   |   |-- lha.SlackBuild

-|   |   |   |-- lha_1.14i-10.1.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- libcgroup

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- libcgroup-0.37.1.tar.xz

-|   |   |   |-- libcgroup.SlackBuild

-|   |   |   |-- libcgroup.conf.diff.gz

-|   |   |   |-- libcgroup.init.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- lilo

-|   |   |   |-- lilo-22.8.src.tar.gz

-|   |   |   |-- lilo-22.8.src.tar.gz.sig

-|   |   |   |-- lilo.SlackBuild

-|   |   |   |-- lilo.use_major_minor_instead_lvm_name.diff.gz

-|   |   |   |-- liloconfig

-|   |   |   |-- setup.liloconfig

-|   |   |   |-- sl1337.bmp

-|   |   |   |-- slack-desc

-|   |   |   |-- slack.bmp

-|   |   |   |-- slack.dat

-|   |   |   |-- slack64.bmp

-|   |   |   `-- text.lilohelp

-|   |   |-- logrotate

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- logrotate-3.7.8.tar.xz

-|   |   |   |-- logrotate.SlackBuild

-|   |   |   |-- logrotate.conf.gz

-|   |   |   |-- logrotate.cron.gz

-|   |   |   |-- logrotate.slackware.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- lrzip

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lrzip-0.602.tar.xz

-|   |   |   |-- lrzip.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- lvm2

-|   |   |   |-- LVM2.2.02.84.tar.xz

-|   |   |   |-- build_with_udev_165_and_later.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lvm2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mcelog

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mcelog-1.0pre3.tar.bz2

-|   |   |   |-- mcelog-1.0pre3.tar.bz2.sign

-|   |   |   |-- mcelog.SlackBuild

-|   |   |   |-- mcelog.init.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- mdadm

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mdadm-3.1.5.tar.bz2

-|   |   |   |-- mdadm-3.1.5.tar.bz2.sign

-|   |   |   |-- mdadm.SlackBuild

-|   |   |   |-- mdadm.static.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- minicom

-|   |   |   |-- config.sub-x86_64.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lrzsz_0.12.21-5.diff.gz

-|   |   |   |-- lrzsz_0.12.21.orig.tar.gz

-|   |   |   |-- minicom-2.5.tar.gz

-|   |   |   |-- minicom.SlackBuild

-|   |   |   |-- minicom.users.gz

-|   |   |   `-- slack-desc

-|   |   |-- mkinitrd

-|   |   |   |-- README.initrd

-|   |   |   |-- _initrd-tree.tar.gz

-|   |   |   |-- busybox-1.18.4.tar.xz

-|   |   |   |-- busybox-dot-config

-|   |   |   |-- busybox-dot-config.1.15.x

-|   |   |   |-- busybox-dot-config.1.17.x

-|   |   |   |-- init

-|   |   |   |-- keymaps.tar.gz

-|   |   |   |-- mkinitrd

-|   |   |   |-- mkinitrd.8

-|   |   |   |-- mkinitrd.SlackBuild

-|   |   |   |-- mkinitrd.conf.5

-|   |   |   |-- mkinitrd.conf.sample

-|   |   |   |-- mkinitrd_command_generator.sh

-|   |   |   `-- slack-desc

-|   |   |-- module-init-tools

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- modprobe.ignore_some_suffixes.diff.gz

-|   |   |   |-- module-init-tools-3.12.tar.bz2

-|   |   |   |-- module-init-tools.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mt-st

-|   |   |   |-- _mt-st.tar.gz

-|   |   |   |-- mt-st-0.9b.tar.gz

-|   |   |   |-- mt-st.SlackBuild

-|   |   |   |-- mt-st.config.diff.gz

-|   |   |   |-- mt-st.man.diff.gz

-|   |   |   |-- mt-st.sdlt.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- mtx

-|   |   |   |-- mtx-1.3.12.tar.gz

-|   |   |   |-- mtx.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ncompress

-|   |   |   |-- ncompress-4.2.4.3.tar.gz

-|   |   |   |-- ncompress.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ntfs-3g

-|   |   |   |-- 10-ntfs-3g-policy.fdi

-|   |   |   |-- ntfs-3g-2011.1.15.tar.xz

-|   |   |   |-- ntfs-3g.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- patch

-|   |   |   |-- patch-2.6.1.tar.xz

-|   |   |   |-- patch-2.6.1.tar.xz.sig

-|   |   |   |-- patch.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pciutils

-|   |   |   |-- pciutils-3.1.7.tar.xz

-|   |   |   |-- pciutils.SlackBuild

-|   |   |   |-- pciutils.ids.dest.diff.gz

-|   |   |   |-- pciutils.url

-|   |   |   `-- slack-desc

-|   |   |-- pcmciautils

-|   |   |   |-- cis-cs-3.2.8.tar.gz

-|   |   |   |-- config

-|   |   |   |   |-- 60-pcmcia.rules

-|   |   |   |   |-- config.opts

-|   |   |   |   `-- rc.pcmcia

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- pcmciautils-017.tar.bz2

-|   |   |   |-- pcmciautils-017.tar.sign

-|   |   |   |-- pcmciautils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pkgtools

-|   |   |   |-- manpages

-|   |   |   |   |-- explodepkg.8

-|   |   |   |   |-- installpkg.8

-|   |   |   |   |-- makepkg.8

-|   |   |   |   |-- pkgtool.8

-|   |   |   |   |-- removepkg.8

-|   |   |   |   |-- setup.8-deprecated

-|   |   |   |   `-- upgradepkg.8

-|   |   |   |-- obsolete-scripts

-|   |   |   |   |-- README

-|   |   |   |   `-- setup.90.modem-device

-|   |   |   |-- pkgtools.SlackBuild

-|   |   |   |-- scripts

-|   |   |   |   |-- explodepkg

-|   |   |   |   |-- installpkg

-|   |   |   |   |-- makebootdisk

-|   |   |   |   |-- makepkg

-|   |   |   |   |-- pkgtool

-|   |   |   |   |-- removepkg

-|   |   |   |   |-- setup.70.install-kernel

-|   |   |   |   |-- setup.80.make-bootdisk

-|   |   |   |   |-- setup.htmlview

-|   |   |   |   |-- setup.services

-|   |   |   |   `-- upgradepkg

-|   |   |   `-- slack-desc

-|   |   |-- procps

-|   |   |   |-- procinfo-18.tar.gz

-|   |   |   |-- procinfo.gcc3.diff.gz

-|   |   |   |-- procinfo.lsm

-|   |   |   |-- procps-3.2.7-ps-cgroup.patch.gz

-|   |   |   |-- procps-3.2.7-ps-eip64.diff.gz

-|   |   |   |-- procps-3.2.8-ps-cgroup-suppress-root-group.patch.gz

-|   |   |   |-- procps-3.2.8.tar.xz

-|   |   |   |-- procps-3.2.8.unknown.hz.value.diff.gz

-|   |   |   |-- procps.SlackBuild

-|   |   |   |-- procps.nowarning.diff.gz

-|   |   |   |-- procps.w.showfrom.diff.gz

-|   |   |   |-- psmisc-22.13.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- quota

-|   |   |   |-- quota-3.17.tar.xz

-|   |   |   |-- quota.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- reiserfsprogs

-|   |   |   |-- reiserfsprogs-3.6.21.tar.bz2

-|   |   |   |-- reiserfsprogs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rpm2tgz

-|   |   |   |-- getrpmtype.tar.gz

-|   |   |   |-- patches

-|   |   |   |   |-- 0001-fix-d-handling.patch.gz

-|   |   |   |   |-- 0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz

-|   |   |   |   |-- 0003-allow-every-user-to-use-rpm2tgz.patch.gz

-|   |   |   |   |-- 0004-produce-more-compliant-slack-desc.patch.gz

-|   |   |   |   |-- 0005-gzip-man-info-pages.patch.gz

-|   |   |   |   |-- 0006-should-we-use-.txz-format-in-slackware-current.patch.gz

-|   |   |   |   |-- 0007-Add-support-for-.txz-packages-and-rpm2txz-symlink.patch.gz

-|   |   |   |   |-- 0008-Avoid-none-values-in-slack-desc.patch.gz

-|   |   |   |   `-- 0009-Add-c-option-just-as-makepkg-c-y.patch.gz

-|   |   |   |-- rpm2targz

-|   |   |   |-- rpm2targz.README

-|   |   |   |-- rpm2tgz.SlackBuild

-|   |   |   |-- rpmoffset.c

-|   |   |   `-- slack-desc

-|   |   |-- sdparm

-|   |   |   |-- sdparm-1.06.tar.xz

-|   |   |   |-- sdparm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- sed

-|   |   |   |-- sed-4.2.1.tar.xz

-|   |   |   |-- sed.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- shadow

-|   |   |   |-- adduser

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- login.defs.gz

-|   |   |   |-- patches

-|   |   |   |   |-- README_PATCHES

-|   |   |   |   |-- r3054.diff.gz

-|   |   |   |   |-- r3055.diff.gz

-|   |   |   |   |-- r3060.diff.gz

-|   |   |   |   |-- r3062.diff.gz

-|   |   |   |   |-- r3096.diff.gz

-|   |   |   |   |-- r3160.diff.gz

-|   |   |   |   |-- r3194.diff.gz

-|   |   |   |   `-- r3299.diff.gz

-|   |   |   |-- shadow-4.1.4.3.tar.xz

-|   |   |   |-- shadow.SlackBuild

-|   |   |   |-- shadow.url

-|   |   |   |-- slack-desc

-|   |   |   `-- useradd.gz

-|   |   |-- sharutils

-|   |   |   |-- sharutils-4.11.tar.xz

-|   |   |   |-- sharutils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- slocate

-|   |   |   |-- _slocate.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- slocate-3.1.tar.gz

-|   |   |   |-- slocate-3.1.tar.gz.sign

-|   |   |   `-- slocate.SlackBuild

-|   |   |-- smartmontools

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- smartmontools-5.40.tar.xz

-|   |   |   `-- smartmontools.SlackBuild

-|   |   |-- splitvt

-|   |   |   |-- slack-desc

-|   |   |   |-- splitvt-1.6.5.tar.gz

-|   |   |   |-- splitvt.SlackBuild

-|   |   |   `-- splitvt_1.6.5-9.diff.gz

-|   |   |-- sysfsutils

-|   |   |   |-- slack-desc

-|   |   |   |-- sysfsutils-2.1.0.tar.bz2

-|   |   |   `-- sysfsutils.SlackBuild

-|   |   |-- sysklogd

-|   |   |   |-- config

-|   |   |   |   |-- rc.syslog.new

-|   |   |   |   |-- syslog.conf.new

-|   |   |   |   `-- syslog.logrotate

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- sysklogd-1.5.tar.gz

-|   |   |   |-- sysklogd.SlackBuild

-|   |   |   `-- use_memmove_not_strcpy.diff.gz

-|   |   |-- syslinux

-|   |   |   |-- slack-desc

-|   |   |   |-- syslinux-3.84.tar.bz2

-|   |   |   |-- syslinux-3.84.tar.bz2.sign

-|   |   |   `-- syslinux.SlackBuild

-|   |   |-- sysvinit

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- sysvinit-2.86-timeval.patch.gz

-|   |   |   |-- sysvinit-2.86.tar.gz

-|   |   |   |-- sysvinit.SlackBuild

-|   |   |   |-- sysvinit.diff.gz

-|   |   |   `-- sysvinit.pidof.rhforkseverything.diff.gz

-|   |   |-- sysvinit-functions

-|   |   |   |-- README.functions

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- function-src-8.53.tar.bz2

-|   |   |   |-- functions

-|   |   |   |-- slack-desc

-|   |   |   `-- sysvinit-functions.SlackBuild

-|   |   |-- sysvinit-scripts

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- scripts

-|   |   |   |   |-- fetch-rescan-scsi-bus.sh

-|   |   |   |   |-- inittab

-|   |   |   |   |-- rc.4

-|   |   |   |   |-- rc.6

-|   |   |   |   |-- rc.K

-|   |   |   |   |-- rc.M

-|   |   |   |   |-- rc.S

-|   |   |   |   |-- rc.local

-|   |   |   |   |-- rc.loop

-|   |   |   |   |-- rc.sysvinit

-|   |   |   |   `-- rescan-scsi-bus.sh

-|   |   |   |-- slack-desc

-|   |   |   `-- sysvinit-scripts.SlackBuild

-|   |   |-- tar

-|   |   |   |-- rmt.8.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- tar-1.13.bzip2.diff.gz

-|   |   |   |-- tar-1.13.tar.gz

-|   |   |   |-- tar-1.26.tar.xz

-|   |   |   |-- tar-1.26.tar.xz.sig

-|   |   |   |-- tar-1.2x.support_txz.diff.gz

-|   |   |   |-- tar.1.gz

-|   |   |   |-- tar.SlackBuild

-|   |   |   |-- tar.nolonezero.diff.gz

-|   |   |   `-- tar.norecordsizespam.diff.gz

-|   |   |-- tcsh

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- tcsh-6.17.00.tar.xz

-|   |   |   |-- tcsh.SlackBuild

-|   |   |   `-- tcsh.nobuiltincolorls.diff.gz

-|   |   |-- time

-|   |   |   |-- slack-desc

-|   |   |   |-- time-1.7.tar.gz

-|   |   |   `-- time.SlackBuild

-|   |   |-- tree

-|   |   |   |-- slack-desc

-|   |   |   |-- tree-1.5.3.tar.bz2

-|   |   |   `-- tree.SlackBuild

-|   |   |-- udev

-|   |   |   |-- config

-|   |   |   |   |-- modprobe.d

-|   |   |   |   |   |-- blacklist.conf.new

-|   |   |   |   |   |-- isapnp.conf.new

-|   |   |   |   |   |-- psmouse.conf.new

-|   |   |   |   |   `-- usb-controller.conf.new

-|   |   |   |   |-- rc.d

-|   |   |   |   |   `-- rc.udev.new

-|   |   |   |   |-- rules.d

-|   |   |   |   |   |-- 40-slackware.rules

-|   |   |   |   |   |-- 59-non-libata-devices.rules

-|   |   |   |   |   |-- 65-permissions.rules

-|   |   |   |   |   `-- 90-network.rules

-|   |   |   |   |-- scripts

-|   |   |   |   |   `-- nethelper.sh

-|   |   |   |   `-- udev.conf

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rule_generator.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- udev-165.tar.xz

-|   |   |   |-- udev-fixed-devices.tar.gz

-|   |   |   |-- udev.SlackBuild

-|   |   |   `-- udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch.gz

-|   |   |-- unarj

-|   |   |   |-- Makefile.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- unarj.SlackBuild

-|   |   |   `-- unarj265.tar.gz

-|   |   |-- usb_modeswitch

-|   |   |   |-- device_reference.txt.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- usb-modeswitch-1.1.6.tar.bz2

-|   |   |   |-- usb-modeswitch-data-20101222.tar.bz2

-|   |   |   `-- usb_modeswitch.SlackBuild

-|   |   |-- usbutils

-|   |   |   |-- slack-desc

-|   |   |   |-- usbutils-002.tar.bz2

-|   |   |   |-- usbutils-002.tar.bz2.sign

-|   |   |   |-- usbutils.SlackBuild

-|   |   |   `-- usbutils.ids.dest.gz

-|   |   |-- utempter

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- libutempter-1.1.5.tar.bz2

-|   |   |   |-- libutempter-1.1.5.tar.bz2.asc

-|   |   |   |-- slack-desc

-|   |   |   `-- utempter.SlackBuild

-|   |   |-- util-linux

-|   |   |   |-- adjtimex_1.23-1.diff.gz

-|   |   |   |-- adjtimex_1.23.orig.tar.gz

-|   |   |   |-- bsdstrings.tar.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- net-tools-1.60.tar.xz

-|   |   |   |-- net-tools.diff.gz

-|   |   |   |-- net-tools_1.60-19.diff.gz

-|   |   |   |-- scsi_ioctl.h

-|   |   |   |-- setserial-2.17.tar.gz

-|   |   |   |-- setserial-rc.serial.diff.gz

-|   |   |   |-- setserial-undef_TIOCGHAYESESP.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- util-linux-2.19.tar.xz

-|   |   |   |-- util-linux.SlackBuild

-|   |   |   |-- util-linux.fdisk-no-solaris.diff.gz

-|   |   |   |-- ziptool-1.4.0.tar.xz

-|   |   |   `-- ziptool-fix_build.patch.gz

-|   |   |-- which

-|   |   |   |-- slack-desc

-|   |   |   |-- which-2.20.tar.gz

-|   |   |   |-- which-2.20.tar.gz.sig

-|   |   |   `-- which.SlackBuild

-|   |   |-- xfsprogs

-|   |   |   |-- slack-desc

-|   |   |   |-- xfsprogs-3.1.4.tar.xz

-|   |   |   `-- xfsprogs.SlackBuild

-|   |   |-- xz

-|   |   |   |-- slack-desc

-|   |   |   |-- xz-5.0.2.tar.bz2

-|   |   |   |-- xz-5.0.2.tar.bz2.sig

-|   |   |   `-- xz.SlackBuild

-|   |   `-- zoo

-|   |       |-- slack-desc

-|   |       |-- zoo-2.10.tar.gz

-|   |       |-- zoo.SlackBuild

-|   |       `-- zoo_2.10-22.debian.tar.gz

-|   |-- ap

-|   |   |-- a2ps

-|   |   |   |-- a2ps-4.14.tar.bz2

-|   |   |   |-- a2ps.SlackBuild

-|   |   |   |-- a2ps.a2ps_cfg.in.diff.gz

-|   |   |   |-- a2ps.diff.gz

-|   |   |   |-- psutils-1.17.tar.gz

-|   |   |   |-- psutils.destdir.diff.gz

-|   |   |   |-- psutils.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- acct

-|   |   |   |-- acct-6.5.4.tar.xz

-|   |   |   |-- acct.SlackBuild

-|   |   |   |-- acct.logdir.fhs.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- alsa-utils

-|   |   |   |-- alsa-utils-1.0.24.2.tar.bz2

-|   |   |   |-- alsa-utils.SlackBuild

-|   |   |   |-- alsa-utils.alsaconf.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.alsa.gz

-|   |   |   `-- slack-desc

-|   |   |-- amp

-|   |   |   |-- _amp.tar.gz

-|   |   |   |-- amp-0.7.6.tar.gz

-|   |   |   |-- amp-gcc34.diff.gz

-|   |   |   |-- amp.SlackBuild

-|   |   |   |-- license_excerpts

-|   |   |   `-- slack-desc

-|   |   |-- ash

-|   |   |   |-- ash-0.4.0.tar.gz

-|   |   |   |-- ash.SlackBuild

-|   |   |   |-- patches

-|   |   |   |   |-- ash-builtin.patch.gz

-|   |   |   |   |-- ash-debian.patch.gz

-|   |   |   |   |-- ash-echo.patch.gz

-|   |   |   |   |-- ash-freebsd.patch.gz

-|   |   |   |   |-- ash-getcwd.patch.gz

-|   |   |   |   |-- ash-getopt.patch.gz

-|   |   |   |   |-- ash-glob.patch.gz

-|   |   |   |   |-- ash-hetio.patch.gz

-|   |   |   |   |-- ash-jobs.patch.gz

-|   |   |   |   |-- ash-kill.patch.gz

-|   |   |   |   |-- ash-makefile.patch.gz

-|   |   |   |   |-- ash-manpage.patch.gz

-|   |   |   |   |-- ash-memout.patch.gz

-|   |   |   |   |-- ash-misc.patch.gz

-|   |   |   |   |-- ash-ppid.patch.gz

-|   |   |   |   |-- ash-redir.patch.gz

-|   |   |   |   |-- ash-setmode.patch.gz

-|   |   |   |   |-- ash-sighup.patch.gz

-|   |   |   |   |-- ash-syntax.patch.gz

-|   |   |   |   |-- ash-test.patch.gz

-|   |   |   |   `-- ash-times.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- at

-|   |   |   |-- at-3.1.12.tar.xz

-|   |   |   |-- at.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- aumix

-|   |   |   |-- aumix-2.9.1.tar.xz

-|   |   |   |-- aumix.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- bc

-|   |   |   |-- bc-1.06.95.tar.bz2

-|   |   |   |-- bc-1.06.95.tar.bz2.sig

-|   |   |   |-- bc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- bpe

-|   |   |   |-- bpe-2.01.00.tar.gz

-|   |   |   |-- bpe.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cdparanoia

-|   |   |   |-- cdparanoia-III-10.2.src.tar.gz

-|   |   |   |-- cdparanoia-III-10.2_cdda_private.patch.gz

-|   |   |   |-- cdparanoia.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cdrdao

-|   |   |   |-- cdrdao-1.2.3.tar.xz

-|   |   |   |-- cdrdao.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cdrtools

-|   |   |   |-- cdrtools-3.01a02.tar.xz

-|   |   |   |-- cdrtools.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- zisofs-tools-1.0.8.tar.bz2

-|   |   |   `-- zisofs-tools-1.0.8.tar.bz2.sign

-|   |   |-- dc3dd

-|   |   |   |-- dc3dd-6.12.3.tar.xz

-|   |   |   |-- dc3dd.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ddrescue

-|   |   |   |-- ddrescue-1.14.tar.xz

-|   |   |   |-- ddrescue.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- diffstat

-|   |   |   |-- diffstat-1.53.tar.xz

-|   |   |   |-- diffstat.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- diffutils

-|   |   |   |-- diffutils-3.0.tar.xz

-|   |   |   |-- diffutils-sdiff-no-waitpid.patch.gz

-|   |   |   |-- diffutils.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- dmapi

-|   |   |   |-- dmapi-2.2.10.tar.xz

-|   |   |   |-- dmapi.SlackBuild

-|   |   |   |-- dmapi.destdir.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- dmidecode

-|   |   |   |-- dmidecode-2.11.tar.bz2

-|   |   |   |-- dmidecode-2.11.tar.bz2.sig

-|   |   |   |-- dmidecode.SlackBuild

-|   |   |   |-- dmidecode.makefile.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- dvd+rw-tools

-|   |   |   |-- dvd+rw-tools-7.1.tar.gz

-|   |   |   |-- dvd+rw-tools.SlackBuild

-|   |   |   |-- dvd+rw-tools.limits.h.diff.gz

-|   |   |   |-- dvd+rw-tools.url

-|   |   |   `-- slack-desc

-|   |   |-- enscript

-|   |   |   |-- enscript-1.6.5.2.tar.xz

-|   |   |   |-- enscript.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- flac

-|   |   |   |-- flac-1.2.1.tar.xz

-|   |   |   |-- flac.SlackBuild

-|   |   |   |-- flac.gcc45.diff.gz

-|   |   |   |-- flac.man.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- foomatic-filters

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- foomatic-filters-4.0.6.tar.gz

-|   |   |   |-- foomatic-filters.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ghostscript

-|   |   |   |-- cidfmap.gz

-|   |   |   |-- ghostscript-9.00.tar.xz

-|   |   |   |-- ghostscript.SlackBuild

-|   |   |   |-- ghostscript.rev11948.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- ghostscript-fonts-std

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- ghostscript-fonts-std-8.11.tar.bz2

-|   |   |   |-- ghostscript-fonts-std.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gphoto2

-|   |   |   |-- gphoto2-2.4.10.tar.xz

-|   |   |   |-- gphoto2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- groff

-|   |   |   |-- groff-1.21.tar.xz

-|   |   |   |-- groff.SlackBuild

-|   |   |   |-- groff.man.mdoc.local.gz

-|   |   |   `-- slack-desc

-|   |   |-- gutenprint

-|   |   |   |-- gutenprint-5.2.6.tar.xz

-|   |   |   |-- gutenprint.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- hplip

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- hplip-3.11.3a.tar.xz

-|   |   |   |-- hplip.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ispell

-|   |   |   |-- ispell-3.2.06.tar.gz

-|   |   |   |-- ispell.SlackBuild

-|   |   |   |-- ispell.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- jed

-|   |   |   |-- jed-0.99-19.tar.bz2

-|   |   |   |-- jed-0.99-19.tar.bz2.asc

-|   |   |   |-- jed.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- joe

-|   |   |   |-- joe-3.7.tar.xz

-|   |   |   |-- joe.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- jove

-|   |   |   |-- jove.SlackBuild

-|   |   |   |-- jove.makefile.diff.gz

-|   |   |   |-- jove4.16.0.73.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- ksh93

-|   |   |   |-- CPL

-|   |   |   |-- INIT.2010-06-21.tgz

-|   |   |   |-- ast-ksh-locale.2010-02-02.tgz

-|   |   |   |-- ast-ksh.2010-06-21.tgz

-|   |   |   |-- ksh93.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libx86

-|   |   |   |-- libx86-1.1.tar.gz

-|   |   |   |-- libx86.SlackBuild

-|   |   |   |-- libx86.info

-|   |   |   |-- lrmi.c.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- linuxdoc-tools

-|   |   |   |-- ChangeLog.txt

-|   |   |   |-- arm

-|   |   |   |   `-- build

-|   |   |   |-- linuxdoc-tools.SlackBuild

-|   |   |   |-- linuxdoc-tools.build

-|   |   |   |-- postbuildfixes.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- sources

-|   |   |   |   |-- asciidoc-8.6.2.tar.xz

-|   |   |   |   |-- asciidoc.asciidoc7compatible.revertbrokenchange.diff.xz

-|   |   |   |   |-- docbook-dsssl-1.79.tar.xz

-|   |   |   |   |-- docbook-dsssl-doc-1.79.tar.xz

-|   |   |   |   |-- docbook-style-xsl-1.75.2-6.fc14.src.rpm

-|   |   |   |   |-- docbook-utils-0.6.14-24.fc14.src.rpm

-|   |   |   |   |-- docbook-xml-4.5.zip

-|   |   |   |   |-- docbook_4.5.orig.tar.xz

-|   |   |   |   |-- gnome-doc-utils-0.20.4.tar.xz

-|   |   |   |   |-- gtk-doc-1.15.tar.xz

-|   |   |   |   |-- gtk-doc.patch.xz

-|   |   |   |   |-- libsgmls-perl_1.03ii-32.diff.xz

-|   |   |   |   |-- libsgmls-perl_1.03ii.orig.tar.xz

-|   |   |   |   |-- linuxdoc-tools-0.9.66-6.fc14.src.rpm

-|   |   |   |   |-- openjade-1.3.3-pre1.tar.xz

-|   |   |   |   |-- opensp-1.5.2-12.fc12.src.rpm

-|   |   |   |   |-- sgml-common-0.6.3-33.fc14.src.rpm

-|   |   |   |   |-- source.download

-|   |   |   |   `-- xmlto-0.0.23-3.fc13.src.rpm

-|   |   |   `-- trackbuild.linuxdoc-tools

-|   |   |-- lm_sensors

-|   |   |   |-- lm_sensors-3.1.2.tar.bz2

-|   |   |   |-- lm_sensors-3.1.2.tar.bz2.sig

-|   |   |   |-- lm_sensors.SlackBuild

-|   |   |   |-- lm_sensors.makefile.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- lsof

-|   |   |   |-- lsof.SlackBuild

-|   |   |   |-- lsof_4.83.tar.bz2

-|   |   |   |-- lsof_4.83.tar.bz2.sig

-|   |   |   `-- slack-desc

-|   |   |-- lsscsi

-|   |   |   |-- lsscsi-0.24.tar.xz

-|   |   |   |-- lsscsi.SlackBuild

-|   |   |   |-- lsscsi.url

-|   |   |   `-- slack-desc

-|   |   |-- lxc

-|   |   |   |-- lxc-0.7.4.tar.gz

-|   |   |   |-- lxc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- madplay

-|   |   |   |-- madplay-0.15.2b-fix-segfault.patch.gz

-|   |   |   |-- madplay-0.15.2b.tar.xz

-|   |   |   |-- madplay.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- man

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- man-1.6f.nroff.mandoc.diff.gz

-|   |   |   |-- man-1.6g.tar.xz

-|   |   |   |-- man.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- man-pages

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- man-pages-3.32.tar.bz2

-|   |   |   |-- man-pages-posix-2003-a.tar.bz2

-|   |   |   |-- man-pages.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- whatis.sample.xz

-|   |   |-- mc

-|   |   |   |-- mc-4.7.5.2.tar.xz

-|   |   |   |-- mc.SlackBuild

-|   |   |   |-- mc.ext.in.geeqie.diff.gz

-|   |   |   |-- profile.d

-|   |   |   |   |-- mc-wrapper.csh

-|   |   |   |   |-- mc-wrapper.sh

-|   |   |   |   |-- mc.csh

-|   |   |   |   `-- mc.sh

-|   |   |   `-- slack-desc

-|   |   |-- moc

-|   |   |   |-- moc-2.5.0-alpha4.tar.xz

-|   |   |   |-- moc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- most

-|   |   |   |-- most-5.0.0a.tar.bz2

-|   |   |   |-- most.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mpg123

-|   |   |   |-- mpg123-1.13.3.tar.xz

-|   |   |   |-- mpg123.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mysql

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mysql-5.1.56.tar.xz

-|   |   |   |-- mysql-embedded.build

-|   |   |   |-- mysql.SlackBuild

-|   |   |   |-- rc.mysqld.gz

-|   |   |   `-- slack-desc

-|   |   |-- nano

-|   |   |   |-- nano-2.3.0.tar.xz

-|   |   |   |-- nano.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- normalize

-|   |   |   |-- normalize-0.7.7.tar.bz2

-|   |   |   |-- normalize.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ntfsprogs

-|   |   |   |-- ntfsprogs-2.0.0.tar.bz2

-|   |   |   |-- ntfsprogs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pm-utils

-|   |   |   |-- 49bluetooth-generic

-|   |   |   |-- README.SLACKWARE

-|   |   |   |-- fix-wrong-path-in-intel-audio-powersave.patch.gz

-|   |   |   |-- pm-quirks-20100619.tar.gz

-|   |   |   |-- pm-utils-1.4.1.tar.gz

-|   |   |   |-- pm-utils.SlackBuild

-|   |   |   |-- pm-utils.url

-|   |   |   |-- slack-desc

-|   |   |   `-- use_more_sane_harddrive_defaults.patch.gz

-|   |   |-- powertop

-|   |   |   |-- powertop-1.13.tar.gz

-|   |   |   |-- powertop.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- radeontool

-|   |   |   |-- radeontool-1.6.1.tar.bz2

-|   |   |   |-- radeontool.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rexima

-|   |   |   |-- rexima-1.4.tar.gz

-|   |   |   |-- rexima.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rpm

-|   |   |   |-- Packages.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rpm-4.8.1.tar.xz

-|   |   |   |-- rpm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rzip

-|   |   |   |-- rzip-2.1.tar.gz

-|   |   |   |-- rzip.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- sc

-|   |   |   |-- _sc.tar.gz

-|   |   |   |-- sc-7.16-3.diff.gz

-|   |   |   |-- sc-7.16.lsm

-|   |   |   |-- sc-7.16.tar.gz

-|   |   |   |-- sc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- screen

-|   |   |   |-- screen-4.0.3.tar.bz2

-|   |   |   |-- screen.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- seejpeg

-|   |   |   |-- _seejpeg.tar.gz

-|   |   |   |-- libjpeg-6a.tar.gz

-|   |   |   |-- seejpeg-1.10.diff.gz

-|   |   |   |-- seejpeg-1.10.lsm

-|   |   |   |-- seejpeg-1.10.tgz

-|   |   |   |-- seejpeg.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- slackpkg

-|   |   |   `-- README

-|   |   |-- sox

-|   |   |   |-- slack-desc

-|   |   |   |-- sox-14.3.2.tar.xz

-|   |   |   `-- sox.SlackBuild

-|   |   |-- sqlite

-|   |   |   |-- COPYRIGHT.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- sqlite-src-3070500.tar.xz

-|   |   |   `-- sqlite.SlackBuild

-|   |   |-- sudo

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- sudo-1.7.4p6.tar.gz

-|   |   |   |-- sudo-1.7.4p6.tar.gz.sig

-|   |   |   `-- sudo.SlackBuild

-|   |   |-- sysstat

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- sysstat-9.0.6.1.tar.bz2

-|   |   |   `-- sysstat.SlackBuild

-|   |   |-- texinfo

-|   |   |   |-- dir.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- texinfo-4.13a.tar.bz2

-|   |   |   `-- texinfo.SlackBuild

-|   |   |-- vbetool

-|   |   |   |-- slack-desc

-|   |   |   |-- vbetool-1.1.tar.gz

-|   |   |   |-- vbetool.SlackBuild

-|   |   |   `-- vbetool.info

-|   |   |-- vim

-|   |   |   |-- ctags-5.8.tar.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gvim.desktop

-|   |   |   |-- gvim.png

-|   |   |   |-- patches

-|   |   |   |   |-- 7.3.001.gz

-|   |   |   |   |-- 7.3.002.gz

-|   |   |   |   |-- 7.3.003.gz

-|   |   |   |   |-- 7.3.004.gz

-|   |   |   |   |-- 7.3.005.gz

-|   |   |   |   |-- 7.3.006.gz

-|   |   |   |   |-- 7.3.007.gz

-|   |   |   |   |-- 7.3.008.gz

-|   |   |   |   |-- 7.3.009.gz

-|   |   |   |   |-- 7.3.010.gz

-|   |   |   |   |-- 7.3.011.gz

-|   |   |   |   |-- 7.3.012.gz

-|   |   |   |   |-- 7.3.013.gz

-|   |   |   |   |-- 7.3.014.gz

-|   |   |   |   |-- 7.3.015.gz

-|   |   |   |   |-- 7.3.016.gz

-|   |   |   |   |-- 7.3.017.gz

-|   |   |   |   |-- 7.3.018.gz

-|   |   |   |   |-- 7.3.019.gz

-|   |   |   |   |-- 7.3.020.gz

-|   |   |   |   |-- 7.3.021.gz

-|   |   |   |   |-- 7.3.022.gz

-|   |   |   |   |-- 7.3.023.gz

-|   |   |   |   |-- 7.3.024.gz

-|   |   |   |   |-- 7.3.025.gz

-|   |   |   |   |-- 7.3.026.gz

-|   |   |   |   |-- 7.3.027.gz

-|   |   |   |   |-- 7.3.028.gz

-|   |   |   |   |-- 7.3.029.gz

-|   |   |   |   |-- 7.3.030.gz

-|   |   |   |   |-- 7.3.031.gz

-|   |   |   |   |-- 7.3.032.gz

-|   |   |   |   |-- 7.3.033.gz

-|   |   |   |   |-- 7.3.034.gz

-|   |   |   |   |-- 7.3.035.gz

-|   |   |   |   |-- 7.3.036.gz

-|   |   |   |   |-- 7.3.037.gz

-|   |   |   |   |-- 7.3.038.gz

-|   |   |   |   |-- 7.3.039.gz

-|   |   |   |   |-- 7.3.040.gz

-|   |   |   |   |-- 7.3.041.gz

-|   |   |   |   |-- 7.3.042.gz

-|   |   |   |   |-- 7.3.043.gz

-|   |   |   |   |-- 7.3.044.gz

-|   |   |   |   |-- 7.3.045.gz

-|   |   |   |   |-- 7.3.046.gz

-|   |   |   |   |-- 7.3.047.gz

-|   |   |   |   |-- 7.3.048.gz

-|   |   |   |   |-- 7.3.049.gz

-|   |   |   |   |-- 7.3.050.gz

-|   |   |   |   |-- 7.3.051.gz

-|   |   |   |   |-- 7.3.052.gz

-|   |   |   |   |-- 7.3.053.gz

-|   |   |   |   |-- 7.3.054.gz

-|   |   |   |   |-- 7.3.055.gz

-|   |   |   |   |-- 7.3.056.gz

-|   |   |   |   |-- 7.3.057.gz

-|   |   |   |   |-- 7.3.058.gz

-|   |   |   |   |-- 7.3.059.gz

-|   |   |   |   |-- 7.3.060.gz

-|   |   |   |   |-- 7.3.061.gz

-|   |   |   |   |-- 7.3.062.gz

-|   |   |   |   |-- 7.3.063.gz

-|   |   |   |   |-- 7.3.064.gz

-|   |   |   |   |-- 7.3.065.gz

-|   |   |   |   |-- 7.3.066.gz

-|   |   |   |   |-- 7.3.067.gz

-|   |   |   |   |-- 7.3.068.gz

-|   |   |   |   |-- 7.3.069.gz

-|   |   |   |   |-- 7.3.070.gz

-|   |   |   |   |-- 7.3.071.gz

-|   |   |   |   |-- 7.3.072.gz

-|   |   |   |   |-- 7.3.073.gz

-|   |   |   |   |-- 7.3.074.gz

-|   |   |   |   |-- 7.3.075.gz

-|   |   |   |   |-- 7.3.076.gz

-|   |   |   |   |-- 7.3.077.gz

-|   |   |   |   |-- 7.3.078.gz

-|   |   |   |   |-- 7.3.079.gz

-|   |   |   |   |-- 7.3.080.gz

-|   |   |   |   |-- 7.3.081.gz

-|   |   |   |   |-- 7.3.082.gz

-|   |   |   |   |-- 7.3.083.gz

-|   |   |   |   |-- 7.3.084.gz

-|   |   |   |   |-- 7.3.085.gz

-|   |   |   |   |-- 7.3.086.gz

-|   |   |   |   |-- 7.3.087.gz

-|   |   |   |   |-- 7.3.088.gz

-|   |   |   |   |-- 7.3.089.gz

-|   |   |   |   |-- 7.3.090.gz

-|   |   |   |   |-- 7.3.091.gz

-|   |   |   |   |-- 7.3.092.gz

-|   |   |   |   |-- 7.3.093.gz

-|   |   |   |   |-- 7.3.094.gz

-|   |   |   |   |-- 7.3.095.gz

-|   |   |   |   |-- 7.3.096.gz

-|   |   |   |   |-- 7.3.097.gz

-|   |   |   |   |-- 7.3.098.gz

-|   |   |   |   |-- 7.3.099.gz

-|   |   |   |   |-- 7.3.100.gz

-|   |   |   |   |-- 7.3.101.gz

-|   |   |   |   |-- 7.3.102.gz

-|   |   |   |   |-- 7.3.103.gz

-|   |   |   |   |-- 7.3.104.gz

-|   |   |   |   |-- 7.3.105.gz

-|   |   |   |   |-- 7.3.106.gz

-|   |   |   |   |-- 7.3.107.gz

-|   |   |   |   |-- 7.3.108.gz

-|   |   |   |   |-- 7.3.109.gz

-|   |   |   |   |-- 7.3.110.gz

-|   |   |   |   |-- 7.3.111.gz

-|   |   |   |   |-- 7.3.112.gz

-|   |   |   |   |-- 7.3.113.gz

-|   |   |   |   |-- 7.3.114.gz

-|   |   |   |   |-- 7.3.115.gz

-|   |   |   |   |-- 7.3.116.gz

-|   |   |   |   |-- 7.3.117.gz

-|   |   |   |   |-- 7.3.118.gz

-|   |   |   |   |-- 7.3.119.gz

-|   |   |   |   |-- 7.3.120.gz

-|   |   |   |   |-- 7.3.121.gz

-|   |   |   |   |-- 7.3.122.gz

-|   |   |   |   |-- 7.3.123.gz

-|   |   |   |   |-- 7.3.124.gz

-|   |   |   |   |-- 7.3.125.gz

-|   |   |   |   |-- 7.3.126.gz

-|   |   |   |   |-- 7.3.127.gz

-|   |   |   |   |-- 7.3.128.gz

-|   |   |   |   |-- 7.3.129.gz

-|   |   |   |   |-- 7.3.130.gz

-|   |   |   |   |-- 7.3.131.gz

-|   |   |   |   |-- 7.3.132.gz

-|   |   |   |   |-- 7.3.133.gz

-|   |   |   |   |-- 7.3.134.gz

-|   |   |   |   |-- 7.3.135.gz

-|   |   |   |   |-- 7.3.136.gz

-|   |   |   |   |-- 7.3.137.gz

-|   |   |   |   |-- 7.3.138.gz

-|   |   |   |   |-- 7.3.139.gz

-|   |   |   |   |-- 7.3.140.gz

-|   |   |   |   |-- 7.3.141.gz

-|   |   |   |   |-- 7.3.142.gz

-|   |   |   |   |-- 7.3.143.gz

-|   |   |   |   |-- 7.3.144.gz

-|   |   |   |   |-- 7.3.145.gz

-|   |   |   |   |-- 7.3.146.gz

-|   |   |   |   |-- 7.3.147.gz

-|   |   |   |   |-- 7.3.148.gz

-|   |   |   |   |-- 7.3.149.gz

-|   |   |   |   |-- 7.3.150.gz

-|   |   |   |   |-- 7.3.151.gz

-|   |   |   |   |-- 7.3.152.gz

-|   |   |   |   |-- 7.3.153.gz

-|   |   |   |   `-- 7.3.154.gz

-|   |   |   |-- slack-desc.vim

-|   |   |   |-- slack-desc.vim-gvim

-|   |   |   |-- vim-7.3.tar.xz

-|   |   |   |-- vim-gvim.SlackBuild

-|   |   |   |-- vim-runtime-syntax-20110328.diff.gz

-|   |   |   |-- vim.SlackBuild

-|   |   |   `-- vim.vimrc.diff.gz

-|   |   |-- vorbis-tools

-|   |   |   |-- slack-desc

-|   |   |   |-- vorbis-tools-1.4.0.tar.xz

-|   |   |   `-- vorbis-tools.SlackBuild

-|   |   |-- workbone

-|   |   |   |-- slack-desc

-|   |   |   |-- workbone.1.diff.gz

-|   |   |   |-- workbone.SlackBuild

-|   |   |   |-- workbone_2.40-9.diff.gz

-|   |   |   `-- workbone_2.40.orig.tar.gz

-|   |   |-- xfsdump

-|   |   |   |-- slack-desc

-|   |   |   |-- xfsdump-3.0.4.tar.xz

-|   |   |   |-- xfsdump.SlackBuild

-|   |   |   `-- xfsdump.destdir.diff.gz

-|   |   `-- zsh

-|   |       |-- doinst.sh.gz

-|   |       |-- slack-desc

-|   |       |-- zsh-4.3.11-doc.tar.xz

-|   |       |-- zsh-4.3.11.tar.xz

-|   |       |-- zsh.SlackBuild

-|   |       `-- zsh.regex.oh.bah.diff.gz

-|   |-- d

-|   |   |-- autoconf

-|   |   |   |-- autoconf-2.68.tar.xz

-|   |   |   |-- autoconf-2.68.tar.xz.sig

-|   |   |   |-- autoconf.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- automake

-|   |   |   |-- automake-1.11.1.tar.xz

-|   |   |   |-- automake.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- binutils

-|   |   |   |-- binutils-2.21.51.0.6.tar.sign

-|   |   |   |-- binutils-2.21.51.0.6.tar.xz

-|   |   |   |-- binutils.SlackBuild

-|   |   |   |-- release.binutils-2.21.51.0.6

-|   |   |   `-- slack-desc

-|   |   |-- bison

-|   |   |   |-- bison-2.4.3.tar.bz2

-|   |   |   |-- bison.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ccache

-|   |   |   |-- ccache-3.1.4.tar.xz

-|   |   |   |-- ccache-3.1.4.tar.xz.asc

-|   |   |   |-- ccache.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- clisp

-|   |   |   |-- clisp-2.49.tar.bz2

-|   |   |   |-- clisp-2.49.tar.bz2.sig

-|   |   |   |-- clisp.SlackBuild

-|   |   |   |-- ffcall-20080704cvs.tar.bz2

-|   |   |   |-- libsigsegv-2.8.tar.xz

-|   |   |   |-- slack-desc

-|   |   |   `-- source.download

-|   |   |-- cmake

-|   |   |   |-- cmake-2.8.4.tar.xz

-|   |   |   |-- cmake.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cscope

-|   |   |   |-- cscope-15.7a.tar.bz2

-|   |   |   |-- cscope.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cvs

-|   |   |   |-- cvs-1.11.23.tar.bz2

-|   |   |   |-- cvs-1.11.23.tar.bz2.sig

-|   |   |   |-- cvs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- dev86

-|   |   |   |-- Dev86src-0.16.17.tar.gz

-|   |   |   |-- README

-|   |   |   |-- dev86-x86_64.noelks.patch.gz

-|   |   |   |-- dev86-x86_64.patch.gz

-|   |   |   |-- dev86.SlackBuild

-|   |   |   |-- dev86.info

-|   |   |   `-- slack-desc

-|   |   |-- distcc

-|   |   |   |-- distcc-2.18.3.tar.bz2

-|   |   |   |-- distcc-2.18.3.tar.bz2.asc

-|   |   |   |-- distcc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- doxygen

-|   |   |   |-- doxygen-1.7.3.src.tar.xz

-|   |   |   |-- doxygen.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- flex

-|   |   |   |-- flex-2.5.35.tar.bz2

-|   |   |   |-- flex.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gcc

-|   |   |   |-- ecj-4.5.jar

-|   |   |   |-- fastjar-0.97.tar.xz

-|   |   |   |-- fastjar-patches

-|   |   |   |   |-- 1000-fastjar-0.97-segfault.patch.gz

-|   |   |   |   |-- 1001-fastjar-0.97-len1.patch.gz

-|   |   |   |   |-- 1002-fastjar-0.97-filename0.patch.gz

-|   |   |   |   |-- 1003-fastjar-CVE-2010-0831.patch.gz

-|   |   |   |   `-- 1004-fastjar-man.patch.gz

-|   |   |   |-- gcc-4.5.2.tar.xz

-|   |   |   |-- gcc-no_fixincludes.diff.gz

-|   |   |   |-- gcc.SlackBuild

-|   |   |   |-- slack-desc.gcc

-|   |   |   |-- slack-desc.gcc-g++

-|   |   |   |-- slack-desc.gcc-gfortran

-|   |   |   |-- slack-desc.gcc-gnat

-|   |   |   |-- slack-desc.gcc-java

-|   |   |   `-- slack-desc.gcc-objc

-|   |   |-- gdb

-|   |   |   |-- gdb-7.2.tar.xz

-|   |   |   |-- gdb.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gettext-tools -> ../a/gettext

-|   |   |-- git

-|   |   |   |-- git-1.7.4.4.tar.sign

-|   |   |   |-- git-1.7.4.4.tar.xz

-|   |   |   |-- git.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gperf

-|   |   |   |-- gperf-3.0.4.tar.xz

-|   |   |   |-- gperf.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- guile

-|   |   |   |-- guile-1.8.8.tar.xz

-|   |   |   |-- guile.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- indent

-|   |   |   |-- indent-2.2.10.tar.bz2

-|   |   |   |-- indent.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- intltool

-|   |   |   |-- intltool-0.41.1.tar.bz2

-|   |   |   |-- intltool.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kernel-headers

-|   |   |   `-- slack-desc

-|   |   |-- libtool

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- libtool-2.4.tar.xz

-|   |   |   |-- libtool-2.4.tar.xz.sig

-|   |   |   |-- libtool.SlackBuild

-|   |   |   |-- libtool.no.moved.warning.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- m4

-|   |   |   |-- m4-1.4.16.tar.xz

-|   |   |   |-- m4-1.4.16.tar.xz.sig

-|   |   |   |-- m4.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- make

-|   |   |   |-- make-3.82.tar.bz2

-|   |   |   |-- make-3.82.tar.bz2.sig

-|   |   |   |-- make.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mercurial

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mercurial-1.8.2.tar.xz

-|   |   |   |-- mercurial.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- nasm

-|   |   |   |-- nasm-2.09.04.tar.bz2

-|   |   |   |-- nasm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- oprofile

-|   |   |   |-- oprofile-0.9.6.tar.xz

-|   |   |   |-- oprofile.SlackBuild

-|   |   |   |-- oprofile.qt4.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- p2c

-|   |   |   |-- _p2c.tar.gz

-|   |   |   |-- p2c-1.21alpha2.tar.gz

-|   |   |   |-- p2c.SlackBuild

-|   |   |   |-- p2c.examples.diff.gz

-|   |   |   |-- p2c_1.21alpha2-2.1.diff.gz

-|   |   |   |-- p2c_time.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- perl

-|   |   |   |-- DBD-mysql-4.018.tar.gz

-|   |   |   |-- DBI-1.616.tar.gz

-|   |   |   |-- URI-1.58.tar.gz

-|   |   |   |-- XML-Parser-2.40.tar.gz

-|   |   |   |-- XML-Simple-2.18.tar.gz

-|   |   |   |-- perl-5.12.3.tar.xz

-|   |   |   |-- perl.SlackBuild

-|   |   |   |-- perl.configure.multilib.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- pkg-config

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- pkg-config-0.25.tar.xz

-|   |   |   |-- pkg-config.SlackBuild

-|   |   |   |-- scripts

-|   |   |   |   |-- pkgconfig.csh

-|   |   |   |   `-- pkgconfig.sh

-|   |   |   `-- slack-desc

-|   |   |-- pmake

-|   |   |   |-- pmake-1.111.tar.gz

-|   |   |   |-- pmake.SlackBuild

-|   |   |   |-- pmake.strerror.strdup.diff.gz

-|   |   |   |-- pmake.txt.gz

-|   |   |   |-- pmake_1.111-1.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- python

-|   |   |   |-- Python-2.6.6.tar.xz

-|   |   |   |-- python-2.6.6-docs-text.tar.xz

-|   |   |   |-- python.SlackBuild

-|   |   |   |-- python.pure64.diff.gz

-|   |   |   |-- python.readline.set_pre_input_hook.diff.gz

-|   |   |   |-- python.x86_64.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- rcs

-|   |   |   |-- _rcs.tar.gz

-|   |   |   |-- rcs-5.7.diff.gz

-|   |   |   |-- rcs-5.7.tar.gz

-|   |   |   |-- rcs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ruby

-|   |   |   |-- ruby-1.9.1-p431.tar.xz

-|   |   |   |-- ruby.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- slacktrack

-|   |   |   |-- OVERVIEW

-|   |   |   |-- slacktrack-2.08-source.tar.xz

-|   |   |   `-- slacktrack.SlackBuild

-|   |   |-- strace

-|   |   |   |-- slack-desc

-|   |   |   |-- strace-4.5.20.tar.bz2

-|   |   |   `-- strace.SlackBuild

-|   |   |-- subversion

-|   |   |   |-- get-svn-book.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- subversion-1.6.16.tar.xz

-|   |   |   |-- subversion.SlackBuild

-|   |   |   `-- svn-book-html.tar.bz2

-|   |   |-- swig

-|   |   |   |-- slack-desc

-|   |   |   |-- swig-1.3.38.tar.bz2

-|   |   |   |-- swig.SlackBuild

-|   |   |   `-- swig.url

-|   |   `-- yasm

-|   |       |-- slack-desc

-|   |       |-- yasm-1.1.0.tar.xz

-|   |       `-- yasm.SlackBuild

-|   |-- e

-|   |   `-- emacs

-|   |       |-- doinst.sh.gz

-|   |       |-- emacs-23.3.tar.xz

-|   |       |-- emacs.SlackBuild

-|   |       `-- slack-desc

-|   |-- f

-|   |   |-- slack-desc.linux-faqs

-|   |   `-- slack-desc.linux-howtos

-|   |-- installer

-|   |   |-- busybox-1.18.4.tar.xz

-|   |   |-- busybox-dot-config

-|   |   |-- busybox.2.6.32.2.diff.gz

-|   |   |-- busybox.SlackBuild

-|   |   |-- dhcpcd

-|   |   |   |-- config.h.diff.gz

-|   |   |   |-- dhcpcd-3.2.3.tar.bz2

-|   |   |   `-- dhcpcd.sh.diff.gz

-|   |   |-- dropbear

-|   |   |   |-- doinst.sh

-|   |   |   |-- dropbear-0.50.tar.bz2

-|   |   |   |-- dropbear.Slackbuild

-|   |   |   |-- dropbear.xauth.patch

-|   |   |   |-- dropbear_dbclientpath.patch

-|   |   |   |-- dropbear_emptypass.patch

-|   |   |   |-- rc.dropbear.new

-|   |   |   `-- slack-desc

-|   |   `-- memtest86+-4.20.tar.xz

-|   |-- k

-|   |   |-- README.TXT

-|   |   |-- README_SPEAKUP_PATCH.TXT

-|   |   |-- config-generic-2.6.37.6

-|   |   |-- config-huge-2.6.37.6

-|   |   |-- kernel-firmware

-|   |   |   |-- kernel-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kernel-generic

-|   |   |   |-- kernel-generic.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kernel-huge

-|   |   |   |-- kernel-huge.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kernel-modules

-|   |   |   |-- kernel-modules.SlackBuild

-|   |   |   |-- rc.modules.new

-|   |   |   `-- slack-desc

-|   |   |-- linux-2.6.37.6.tar.sign

-|   |   `-- linux-2.6.37.6.tar.xz

-|   |-- kde

-|   |   |-- KDE.SlackBuild

-|   |   |-- KDE.options

-|   |   |-- KDE_extra.SlackBuild

-|   |   |-- amarok

-|   |   |   |-- amarok.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- k3b

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- k3b.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kaudiocreator

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kaudiocreator.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdeaccessibility

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeaccessibility.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdeadmin

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeadmin.SlackBuild

-|   |   |   |-- knetworkconf.diff.gz

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdeartwork

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeartwork.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdebase

-|   |   |   |-- config

-|   |   |   |   `-- kdeglobals

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdebase.SlackBuild

-|   |   |   |-- konsole_right_click-185466.patch.gz

-|   |   |   |-- konsole_right_click-185466.patch.patch.gz

-|   |   |   |-- local.options

-|   |   |   |-- profile.d

-|   |   |   |   |-- kde.csh

-|   |   |   |   `-- kde.sh

-|   |   |   `-- slack-desc

-|   |   |-- kdebase-runtime

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdebase-runtime.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdebase-workspace

-|   |   |   |-- config

-|   |   |   |   |-- Xsession

-|   |   |   |   `-- Xsession.orig

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdebase-workspace.SlackBuild

-|   |   |   |-- kdebase-workspace.kdm.server.timeout.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- xinit

-|   |   |       `-- xinitrc.kde

-|   |   |-- kdebindings

-|   |   |   |-- kdebindings-len-ptr-rfloat.diff.gz

-|   |   |   |-- kdebindings-ruby-env.h.diff.gz

-|   |   |   |-- kdebindings-rubyconfig.h.diff.gz

-|   |   |   |-- kdebindings.1170602.sip_4_11_x.diff.gz

-|   |   |   |-- kdebindings.SlackBuild

-|   |   |   |-- local.options

-|   |   |   |-- pykdeuic4.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- kdeedu

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeedu.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdegames

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdegames.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdegraphics

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdegraphics.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdelibs

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdelibs.SlackBuild

-|   |   |   |-- kdelibs.docbook.patch.gz

-|   |   |   |-- kdelibs.khtml.CVE-2011-1168.diff.gz

-|   |   |   |-- kdesu-allow_NOPASS_in_suauth.patch.gz

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdemultimedia

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdemultimedia.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdenetwork

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdenetwork.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdepim

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdepim-4.4.0-install-headers.patch

-|   |   |   |-- kdepim.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdepim-runtime

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdepim-runtime.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdepimlibs

-|   |   |   |-- kdepimlibs-4.5.imap4.cpp.r1216162.diff.gz

-|   |   |   |-- kdepimlibs.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdeplasma-addons

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeplasma-addons.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdesdk

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdesdk.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdetoys

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdetoys.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdeutils

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdeutils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- kdevelop

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdevelop.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdevplatform

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kdevplatform.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kdewebdev

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- include-tidy.patch.gz

-|   |   |   |-- kde4-kdewebdev-findtidy.diff.gz

-|   |   |   |-- kdewebdev.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- tidy

-|   |   |       |-- get-tidy-cvs.sh

-|   |   |       |-- tidy-20100503T2309.tar.xz

-|   |   |       |-- tidy.SlackBuild

-|   |   |       `-- tidy.build

-|   |   |-- koffice

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- koffice.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- konq-plugins

-|   |   |   |-- konq-plugins-4.4.0-qt47.patch.gz

-|   |   |   |-- konq-plugins.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- kopete-cryptography

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- kopete-cryptography.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- ktorrent

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- ktorrent.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- libktorrent

-|   |   |   |-- libktorrent.SlackBuild

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |-- oxygen-icons

-|   |   |   |-- oxygen-icons.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- polkit-kde-1

-|   |   |   |-- local.options

-|   |   |   |-- polkit-kde-1.SlackBuild

-|   |   |   |-- polkit-kde-1.nodrkonqi.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- polkit-kde-agent-1

-|   |   |   |-- local.options

-|   |   |   |-- polkit-kde-agent-1.SlackBuild

-|   |   |   |-- pull-polkit-kde-agent-1

-|   |   |   `-- slack-desc

-|   |   |-- polkit-kde-kcmodules-1

-|   |   |   |-- local.options

-|   |   |   |-- polkit-kde-kcmodules-1.SlackBuild

-|   |   |   |-- pull-polkit-kde-kcmodules-1

-|   |   |   `-- slack-desc

-|   |   |-- polkit-qt-1

-|   |   |   |-- local.options

-|   |   |   |-- polkit-qt-1.SlackBuild

-|   |   |   |-- polkit-qt-1.null-checking.diff.gz

-|   |   |   |-- pull-polkit-qt-1

-|   |   |   `-- slack-desc

-|   |   |-- skanlite

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- local.options

-|   |   |   |-- skanlite.SlackBuild

-|   |   |   `-- slack-desc

-|   |   `-- src

-|   |       |-- extragear

-|   |       |   |-- amarok-2.4.0.tar.xz

-|   |       |   |-- k3b-2.0.2.tar.xz

-|   |       |   |-- kaudiocreator-r1212483.tar.xz

-|   |       |   |-- konq-plugins-4.4.0.tar.xz

-|   |       |   |-- kopete-cryptography-1.3.0-kde4.4.0.tar.xz

-|   |       |   |-- ktorrent-4.0.5.tar.xz

-|   |       |   |-- libktorrent-1.0.5-3.tar.xz

-|   |       |   `-- skanlite-0.7.tar.xz

-|   |       |-- kdeaccessibility-4.5.5.tar.xz

-|   |       |-- kdeadmin-4.5.5.tar.xz

-|   |       |-- kdeartwork-4.5.5.tar.xz

-|   |       |-- kdebase-4.5.5.tar.xz

-|   |       |-- kdebase-runtime-4.5.5.tar.xz

-|   |       |-- kdebase-workspace-4.5.5.tar.xz

-|   |       |-- kdebindings-4.5.5.tar.xz

-|   |       |-- kdeedu-4.5.5.tar.xz

-|   |       |-- kdegames-4.5.5.tar.xz

-|   |       |-- kdegraphics-4.5.5.tar.xz

-|   |       |-- kdelibs-4.5.5.tar.xz

-|   |       |-- kdemultimedia-4.5.5.tar.xz

-|   |       |-- kdenetwork-4.5.5.tar.xz

-|   |       |-- kdepim-4.4.10.tar.xz

-|   |       |-- kdepim-runtime-4.4.10.tar.xz

-|   |       |-- kdepimlibs-4.5.5.tar.xz

-|   |       |-- kdeplasma-addons-4.5.5.tar.xz

-|   |       |-- kdesdk-4.5.5.tar.xz

-|   |       |-- kdetoys-4.5.5.tar.xz

-|   |       |-- kdeutils-4.5.5.tar.xz

-|   |       |-- kdevelop-4.2.2.tar.xz

-|   |       |-- kdevplatform-1.2.2.tar.xz

-|   |       |-- kdewebdev-4.5.5.tar.xz

-|   |       |-- koffice-2.3.3.tar.xz

-|   |       |-- polkit-kde-1-r1145544.tar.xz

-|   |       |-- polkit-kde-agent-1-20101202git.tar.xz

-|   |       |-- polkit-kde-kcmodules-1-20101202git.tar.xz

-|   |       `-- polkit-qt-1-r1145513.tar.xz

-|   |-- kdei

-|   |   |-- kde-l10n

-|   |   |   |-- kde-l10n-ar-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-bg-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ca-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ca@valencia-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-cs-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-da-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-de-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-el-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-en_GB-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-eo-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-es-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-et-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-eu-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-fi-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-fr-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-fy-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ga-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-gl-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-gu-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-he-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-hi-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-hr-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-hu-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ia-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-id-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-is-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-it-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ja-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-kk-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-km-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-kn-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ko-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-lt-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-lv-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ml-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-nb-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-nds-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-nl-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-nn-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-pa-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-pl-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-pt-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-pt_BR-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ro-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-ru-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-sk-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-sl-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-sr-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-sv-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-th-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-tr-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-uk-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-wa-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-zh_CN-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n-zh_TW-4.5.5.tar.bz2

-|   |   |   |-- kde-l10n.SlackBuild

-|   |   |   |-- kdepim-l10n

-|   |   |   |   |-- extract-kdepim-goodness.sh

-|   |   |   |   |-- kdepim-l10n-ar-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-bg-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ca-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ca@valencia-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-cs-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-csb-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-da-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-de-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-el-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-en_GB-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-eo-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-es-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-et-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-eu-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-fi-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff.gz

-|   |   |   |   |-- kdepim-l10n-fr-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-fy-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ga-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-gl-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-gu-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-he-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-hi-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-hr-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-hu-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-id-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-is-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-it-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ja-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-kk-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-km-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-kn-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ko-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-lt-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-lv-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-mai-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-mk-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ml-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-nb-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-nds-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-nl-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-nn-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-pa-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-pl-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-pt-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-pt_BR-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ro-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-ru-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-si-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-sk-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-sl-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-sr-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-sv-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-tg-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-tr-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-uk-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-wa-4.4.5.tar.bz2

-|   |   |   |   |-- kdepim-l10n-zh_CN-4.4.5.tar.bz2

-|   |   |   |   `-- kdepim-l10n-zh_TW-4.4.5.tar.bz2

-|   |   |   |-- languages

-|   |   |   |-- local.options

-|   |   |   `-- slack-desc

-|   |   |       |-- slack-desc.kde-l10n-ar

-|   |   |       |-- slack-desc.kde-l10n-bg

-|   |   |       |-- slack-desc.kde-l10n-bn_IN

-|   |   |       |-- slack-desc.kde-l10n-ca

-|   |   |       |-- slack-desc.kde-l10n-ca@valencia

-|   |   |       |-- slack-desc.kde-l10n-cs

-|   |   |       |-- slack-desc.kde-l10n-csb

-|   |   |       |-- slack-desc.kde-l10n-da

-|   |   |       |-- slack-desc.kde-l10n-de

-|   |   |       |-- slack-desc.kde-l10n-el

-|   |   |       |-- slack-desc.kde-l10n-en_GB

-|   |   |       |-- slack-desc.kde-l10n-eo

-|   |   |       |-- slack-desc.kde-l10n-es

-|   |   |       |-- slack-desc.kde-l10n-et

-|   |   |       |-- slack-desc.kde-l10n-eu

-|   |   |       |-- slack-desc.kde-l10n-fi

-|   |   |       |-- slack-desc.kde-l10n-fr

-|   |   |       |-- slack-desc.kde-l10n-fy

-|   |   |       |-- slack-desc.kde-l10n-ga

-|   |   |       |-- slack-desc.kde-l10n-gl

-|   |   |       |-- slack-desc.kde-l10n-gu

-|   |   |       |-- slack-desc.kde-l10n-he

-|   |   |       |-- slack-desc.kde-l10n-hi

-|   |   |       |-- slack-desc.kde-l10n-hne

-|   |   |       |-- slack-desc.kde-l10n-hr

-|   |   |       |-- slack-desc.kde-l10n-hu

-|   |   |       |-- slack-desc.kde-l10n-ia

-|   |   |       |-- slack-desc.kde-l10n-id

-|   |   |       |-- slack-desc.kde-l10n-is

-|   |   |       |-- slack-desc.kde-l10n-it

-|   |   |       |-- slack-desc.kde-l10n-ja

-|   |   |       |-- slack-desc.kde-l10n-kk

-|   |   |       |-- slack-desc.kde-l10n-km

-|   |   |       |-- slack-desc.kde-l10n-kn

-|   |   |       |-- slack-desc.kde-l10n-ko

-|   |   |       |-- slack-desc.kde-l10n-ku

-|   |   |       |-- slack-desc.kde-l10n-lt

-|   |   |       |-- slack-desc.kde-l10n-lv

-|   |   |       |-- slack-desc.kde-l10n-mai

-|   |   |       |-- slack-desc.kde-l10n-mk

-|   |   |       |-- slack-desc.kde-l10n-ml

-|   |   |       |-- slack-desc.kde-l10n-mr

-|   |   |       |-- slack-desc.kde-l10n-nb

-|   |   |       |-- slack-desc.kde-l10n-nds

-|   |   |       |-- slack-desc.kde-l10n-nl

-|   |   |       |-- slack-desc.kde-l10n-nn

-|   |   |       |-- slack-desc.kde-l10n-pa

-|   |   |       |-- slack-desc.kde-l10n-pl

-|   |   |       |-- slack-desc.kde-l10n-pt

-|   |   |       |-- slack-desc.kde-l10n-pt_BR

-|   |   |       |-- slack-desc.kde-l10n-ro

-|   |   |       |-- slack-desc.kde-l10n-ru

-|   |   |       |-- slack-desc.kde-l10n-si

-|   |   |       |-- slack-desc.kde-l10n-sk

-|   |   |       |-- slack-desc.kde-l10n-sl

-|   |   |       |-- slack-desc.kde-l10n-sr

-|   |   |       |-- slack-desc.kde-l10n-sv

-|   |   |       |-- slack-desc.kde-l10n-ta

-|   |   |       |-- slack-desc.kde-l10n-tg

-|   |   |       |-- slack-desc.kde-l10n-th

-|   |   |       |-- slack-desc.kde-l10n-tr

-|   |   |       |-- slack-desc.kde-l10n-uk

-|   |   |       |-- slack-desc.kde-l10n-wa

-|   |   |       |-- slack-desc.kde-l10n-zh_CN

-|   |   |       `-- slack-desc.kde-l10n-zh_TW

-|   |   `-- koffice-l10n

-|   |       |-- koffice-l10n-ca-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-ca@valencia-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-da-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-de-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-el-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-en_GB-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-es-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-et-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-fr-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-gl-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-hu-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-it-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-ja-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-kk-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-nb-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-nds-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-nl-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-pl-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-pt-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-pt_BR-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-ru-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-sv-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-tr-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-uk-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-wa-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-zh_CN-2.3.2.tar.bz2

-|   |       |-- koffice-l10n-zh_TW-2.3.2.tar.bz2

-|   |       |-- koffice-l10n.SlackBuild

-|   |       |-- languages

-|   |       `-- slack-desc

-|   |           |-- slack-desc.koffice-l10n-af

-|   |           |-- slack-desc.koffice-l10n-ar

-|   |           |-- slack-desc.koffice-l10n-az

-|   |           |-- slack-desc.koffice-l10n-bg

-|   |           |-- slack-desc.koffice-l10n-br

-|   |           |-- slack-desc.koffice-l10n-bs

-|   |           |-- slack-desc.koffice-l10n-ca

-|   |           |-- slack-desc.koffice-l10n-ca@valencia

-|   |           |-- slack-desc.koffice-l10n-cs

-|   |           |-- slack-desc.koffice-l10n-cy

-|   |           |-- slack-desc.koffice-l10n-da

-|   |           |-- slack-desc.koffice-l10n-de

-|   |           |-- slack-desc.koffice-l10n-el

-|   |           |-- slack-desc.koffice-l10n-en_GB

-|   |           |-- slack-desc.koffice-l10n-eo

-|   |           |-- slack-desc.koffice-l10n-es

-|   |           |-- slack-desc.koffice-l10n-et

-|   |           |-- slack-desc.koffice-l10n-eu

-|   |           |-- slack-desc.koffice-l10n-fa

-|   |           |-- slack-desc.koffice-l10n-fi

-|   |           |-- slack-desc.koffice-l10n-fr

-|   |           |-- slack-desc.koffice-l10n-fy

-|   |           |-- slack-desc.koffice-l10n-ga

-|   |           |-- slack-desc.koffice-l10n-gl

-|   |           |-- slack-desc.koffice-l10n-he

-|   |           |-- slack-desc.koffice-l10n-hi

-|   |           |-- slack-desc.koffice-l10n-hne

-|   |           |-- slack-desc.koffice-l10n-hsb

-|   |           |-- slack-desc.koffice-l10n-hu

-|   |           |-- slack-desc.koffice-l10n-is

-|   |           |-- slack-desc.koffice-l10n-it

-|   |           |-- slack-desc.koffice-l10n-ja

-|   |           |-- slack-desc.koffice-l10n-kk

-|   |           |-- slack-desc.koffice-l10n-km

-|   |           |-- slack-desc.koffice-l10n-lo

-|   |           |-- slack-desc.koffice-l10n-lt

-|   |           |-- slack-desc.koffice-l10n-lv

-|   |           |-- slack-desc.koffice-l10n-mk

-|   |           |-- slack-desc.koffice-l10n-ms

-|   |           |-- slack-desc.koffice-l10n-mt

-|   |           |-- slack-desc.koffice-l10n-nb

-|   |           |-- slack-desc.koffice-l10n-nds

-|   |           |-- slack-desc.koffice-l10n-ne

-|   |           |-- slack-desc.koffice-l10n-nl

-|   |           |-- slack-desc.koffice-l10n-nn

-|   |           |-- slack-desc.koffice-l10n-no

-|   |           |-- slack-desc.koffice-l10n-no_NY

-|   |           |-- slack-desc.koffice-l10n-pl

-|   |           |-- slack-desc.koffice-l10n-pt

-|   |           |-- slack-desc.koffice-l10n-pt_BR

-|   |           |-- slack-desc.koffice-l10n-ro

-|   |           |-- slack-desc.koffice-l10n-ru

-|   |           |-- slack-desc.koffice-l10n-se

-|   |           |-- slack-desc.koffice-l10n-sk

-|   |           |-- slack-desc.koffice-l10n-sl

-|   |           |-- slack-desc.koffice-l10n-sr

-|   |           |-- slack-desc.koffice-l10n-sr@Latn

-|   |           |-- slack-desc.koffice-l10n-sv

-|   |           |-- slack-desc.koffice-l10n-ta

-|   |           |-- slack-desc.koffice-l10n-tg

-|   |           |-- slack-desc.koffice-l10n-th

-|   |           |-- slack-desc.koffice-l10n-tr

-|   |           |-- slack-desc.koffice-l10n-uk

-|   |           |-- slack-desc.koffice-l10n-uz

-|   |           |-- slack-desc.koffice-l10n-ven

-|   |           |-- slack-desc.koffice-l10n-wa

-|   |           |-- slack-desc.koffice-l10n-xh

-|   |           |-- slack-desc.koffice-l10n-zh_CN

-|   |           |-- slack-desc.koffice-l10n-zh_TW

-|   |           `-- slack-desc.koffice-l10n-zu

-|   |-- l

-|   |   |-- ConsoleKit

-|   |   |   |-- ConsoleKit-0.4.3.tar.xz

-|   |   |   |-- ConsoleKit.SlackBuild

-|   |   |   |-- consolekit-0.2.10-cleanup_console_tags.patch.gz

-|   |   |   |-- consolekit-0.4.2-revert.patch.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- pam-foreground-compat.ck

-|   |   |   |-- rc.consolekit

-|   |   |   `-- slack-desc

-|   |   |-- M2Crypto

-|   |   |   |-- M2Crypto-0.20.2.tar.xz

-|   |   |   |-- M2Crypto.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- PyQt

-|   |   |   |-- PyQt-x11-gpl-4.8.1.tar.xz

-|   |   |   |-- PyQt.SlackBuild

-|   |   |   |-- PyQt.info

-|   |   |   |-- PyQt.phonon.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- QScintilla

-|   |   |   |-- QScintilla-gpl-2.4.5.tar.xz

-|   |   |   |-- QScintilla.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- aalib

-|   |   |   |-- aalib-1.4rc5.tar.gz

-|   |   |   |-- aalib.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- slack-desc.11line

-|   |   |-- akonadi

-|   |   |   |-- akonadi-1.4.1.tar.bz2

-|   |   |   |-- akonadi.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- alsa-lib

-|   |   |   |-- alsa-lib-1.0.24.1.tar.xz

-|   |   |   |-- alsa-lib.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- alsa-oss

-|   |   |   |-- alsa-oss-1.0.17.tar.bz2

-|   |   |   |-- alsa-oss.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- apr

-|   |   |   |-- apr-1.4.2.tar.bz2

-|   |   |   |-- apr-1.4.2.tar.bz2.asc

-|   |   |   |-- apr.SlackBuild

-|   |   |   |-- apr.apr_ring.h.gcc45.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- apr-util

-|   |   |   |-- apr-util-1.3.10.tar.bz2

-|   |   |   |-- apr-util-1.3.10.tar.bz2.asc

-|   |   |   |-- apr-util.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- aspell

-|   |   |   |-- aspell-0.60.6.tar.xz

-|   |   |   |-- aspell.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- aspell-dict

-|   |   |   |-- aspell-af-0.50-0.tar.bz2

-|   |   |   |-- aspell-br-0.50-2.tar.bz2

-|   |   |   |-- aspell-cy-0.50-3.tar.bz2

-|   |   |   |-- aspell-dict.SlackBuild

-|   |   |   |-- aspell-el-0.50-3.tar.bz2

-|   |   |   |-- aspell-eo-0.50-2.tar.bz2

-|   |   |   |-- aspell-es-0.50-2.tar.bz2

-|   |   |   |-- aspell-fr-0.50-3.tar.bz2

-|   |   |   |-- aspell-gl-0.50-0.tar.bz2

-|   |   |   |-- aspell-gv-0.50-0.tar.bz2

-|   |   |   |-- aspell-hr-0.51-0.tar.bz2

-|   |   |   |-- aspell-ia-0.50-1.tar.bz2

-|   |   |   |-- aspell-is-0.51.1-0.tar.bz2

-|   |   |   |-- aspell-mi-0.50-0.tar.bz2

-|   |   |   |-- aspell-mk-0.50-0.tar.bz2

-|   |   |   |-- aspell-ms-0.50-0.tar.bz2

-|   |   |   |-- aspell-mt-0.50-0.tar.bz2

-|   |   |   |-- aspell-nb-0.50.1-0.tar.bz2

-|   |   |   |-- aspell-nl-0.50-2.tar.bz2

-|   |   |   |-- aspell-nn-0.50.1-1.tar.bz2

-|   |   |   |-- aspell-no-0.50-2.tar.bz2

-|   |   |   |-- aspell-pl-0.51-0.tar.bz2

-|   |   |   |-- aspell-pt-0.50-2.tar.bz2

-|   |   |   |-- aspell-ro-0.50-2.tar.bz2

-|   |   |   |-- aspell-rw-0.50-0.tar.bz2

-|   |   |   |-- aspell-sk-0.52-0.tar.bz2

-|   |   |   |-- aspell-sl-0.50-0.tar.bz2

-|   |   |   |-- aspell-sv-0.51-0.tar.bz2

-|   |   |   |-- aspell-sw-0.50-0.tar.bz2

-|   |   |   |-- aspell-tr-0.50-0.tar.bz2

-|   |   |   |-- aspell-uk-0.51-0.tar.bz2

-|   |   |   |-- aspell-wa-0.50-0.tar.bz2

-|   |   |   |-- aspell-zu-0.50-0.tar.bz2

-|   |   |   |-- aspell5-be-0.01.tar.bz2

-|   |   |   |-- aspell5-bg-4.0-0.tar.bz2

-|   |   |   |-- aspell5-da-1.4.42-1.tar.bz2

-|   |   |   |-- aspell5-fo-0.2.16-1.tar.bz2

-|   |   |   |-- aspell5-ga-3.6-0.tar.bz2

-|   |   |   |-- aspell5-gd-0.1.1-1.tar.bz2

-|   |   |   |-- aspell5-hil-0.11-0.tar.bz2

-|   |   |   |-- aspell5-id-1.2-0.tar.bz2

-|   |   |   |-- aspell5-ku-0.12-0.tar.bz2

-|   |   |   |-- aspell5-mg-0.03-0.tar.bz2

-|   |   |   |-- aspell5-ny-0.01-0.tar.bz2

-|   |   |   |-- aspell5-sc-1.0.tar.bz2

-|   |   |   |-- aspell5-tet-0.1.1.tar.bz2

-|   |   |   |-- aspell5-tl-0.02-1.tar.bz2

-|   |   |   |-- aspell5-tn-1.0.1-0.tar.bz2

-|   |   |   |-- aspell6-am-0.03-1.tar.bz2

-|   |   |   |-- aspell6-az-0.02-0.tar.bz2

-|   |   |   |-- aspell6-bn-0.01.1-1.tar.bz2

-|   |   |   |-- aspell6-ca-20040130-1.tar.bz2

-|   |   |   |-- aspell6-cs-20040614-1.tar.bz2

-|   |   |   |-- aspell6-csb-0.02-0.tar.bz2

-|   |   |   |-- aspell6-de-20030222-1.tar.bz2

-|   |   |   |-- aspell6-en-6.0-0.tar.bz2

-|   |   |   |-- aspell6-et-0.1.21-1.tar.bz2

-|   |   |   |-- aspell6-fa-0.02-0.tar.bz2

-|   |   |   |-- aspell6-fi-0.7-0.tar.bz2

-|   |   |   |-- aspell6-gu-0.02-0.tar.bz2

-|   |   |   |-- aspell6-he-1.0-0.tar.bz2

-|   |   |   |-- aspell6-hi-0.01-0.tar.bz2

-|   |   |   |-- aspell6-hsb-0.01-1.tar.bz2

-|   |   |   |-- aspell6-hu-0.99.4.2-0.tar.bz2

-|   |   |   |-- aspell6-it-2.2_20050523-0.tar.bz2

-|   |   |   |-- aspell6-la-20020503-0.tar.bz2

-|   |   |   |-- aspell6-lt-1.1+cvs20060103-0.tar.bz2

-|   |   |   |-- aspell6-lv-0.5.5-1.tar.bz2

-|   |   |   |-- aspell6-mn-0.01-0.tar.bz2

-|   |   |   |-- aspell6-mr-0.10-0.tar.bz2

-|   |   |   |-- aspell6-nds-0.01-0.tar.bz2

-|   |   |   |-- aspell6-or-0.03-1.tar.bz2

-|   |   |   |-- aspell6-pa-0.01-1.tar.bz2

-|   |   |   |-- aspell6-pt_BR-20080707-0.tar.bz2

-|   |   |   |-- aspell6-qu-0.02-0.tar.bz2

-|   |   |   |-- aspell6-ru-0.99f7-1.tar.bz2

-|   |   |   |-- aspell6-sr-0.02.tar.bz2

-|   |   |   |-- aspell6-ta-20040424-1.tar.bz2

-|   |   |   |-- aspell6-te-0.01-2.tar.bz2

-|   |   |   |-- aspell6-uk-1.1-0.tar.bz2

-|   |   |   |-- aspell6-uz-0.5-0.tar.bz2

-|   |   |   |-- aspell6-vi-0.01.1-1.tar.bz2

-|   |   |   `-- aspell6-yi-0.01.1-1.tar.bz2

-|   |   |-- atk

-|   |   |   |-- atk-1.32.0.tar.bz2

-|   |   |   |-- atk.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- attica

-|   |   |   |-- attica-0.1.4.tar.bz2

-|   |   |   |-- attica.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- audiofile

-|   |   |   |-- audiofile-0.2.7.tar.xz

-|   |   |   |-- audiofile.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- automoc4

-|   |   |   |-- automoc4-0.9.88.tar.bz2

-|   |   |   |-- automoc4.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- babl

-|   |   |   |-- babl-0.1.2.tar.xz

-|   |   |   |-- babl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- boost

-|   |   |   |-- boost.SlackBuild

-|   |   |   |-- boost_1_45_0.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- cairo

-|   |   |   |-- cairo-1.10.0-buggy_gradients.patch.gz

-|   |   |   |-- cairo-1.10.2.tar.xz

-|   |   |   |-- cairo.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- chmlib

-|   |   |   |-- chmlib-0.40.tar.bz2

-|   |   |   |-- chmlib.SlackBuild

-|   |   |   |-- chmlib.info

-|   |   |   `-- slack-desc

-|   |   |-- clucene

-|   |   |   |-- clucene-core-0.9.21b.tar.bz2

-|   |   |   |-- clucene.SlackBuild

-|   |   |   |-- clucene.info

-|   |   |   `-- slack-desc

-|   |   |-- db42

-|   |   |   |-- db-4.2.52.tar.bz2

-|   |   |   |-- db42.SlackBuild

-|   |   |   |-- patch.4.2.52.1.gz

-|   |   |   |-- patch.4.2.52.2.gz

-|   |   |   |-- patch.4.2.52.3.gz

-|   |   |   |-- patch.4.2.52.4.gz

-|   |   |   `-- slack-desc

-|   |   |-- db44

-|   |   |   |-- db-4.4.20.tar.bz2

-|   |   |   |-- db44.SlackBuild

-|   |   |   |-- patch.4.4.20.1.gz

-|   |   |   |-- patch.4.4.20.2.gz

-|   |   |   `-- slack-desc

-|   |   |-- dbus-glib

-|   |   |   |-- dbus-glib-0.88.tar.xz

-|   |   |   |-- dbus-glib.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- dbus-python

-|   |   |   |-- dbus-python-0.83.1.tar.gz

-|   |   |   |-- dbus-python.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- desktop-file-utils

-|   |   |   |-- desktop-file-utils-0.16.tar.bz2

-|   |   |   |-- desktop-file-utils.SlackBuild

-|   |   |   |-- desktop-file-utils.quiet.warnings.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- djvulibre

-|   |   |   |-- djvulibre-3.5.24.tar.xz

-|   |   |   |-- djvulibre.SlackBuild

-|   |   |   |-- djvulibre.info

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- ebook-tools

-|   |   |   |-- ebook-tools-0.1.1.tar.bz2

-|   |   |   |-- ebook-tools.SlackBuild

-|   |   |   |-- ebook-tools.paths.diff

-|   |   |   `-- slack-desc

-|   |   |-- eigen2

-|   |   |   |-- eigen2-2.0.10.tar.xz

-|   |   |   |-- eigen2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- enchant

-|   |   |   |-- enchant-1.5.0.tar.xz

-|   |   |   |-- enchant.SlackBuild

-|   |   |   |-- enchant.info

-|   |   |   `-- slack-desc

-|   |   |-- esound

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- esound-0.2.41.tar.bz2

-|   |   |   |-- esound.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- exiv2

-|   |   |   |-- exiv2-0.21.1.tar.xz

-|   |   |   |-- exiv2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- expat

-|   |   |   |-- expat-2.0.1-fixes-3.patch.gz

-|   |   |   |-- expat-2.0.1.tar.gz

-|   |   |   |-- expat.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- fftw

-|   |   |   |-- fftw-3.2.2.tar.xz

-|   |   |   |-- fftw.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- freetype

-|   |   |   |-- freetype-2.4.4.tar.bz2

-|   |   |   |-- freetype.SlackBuild

-|   |   |   |-- freetype.illadvisederror.diff.gz

-|   |   |   |-- freetype.subpixel.rendering.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- fribidi

-|   |   |   |-- fribidi-0.10.9.tar.bz2

-|   |   |   |-- fribidi.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- fuse

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fuse-2.8.5.tar.xz

-|   |   |   |-- fuse.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gamin

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gamin-0.1.10.tar.xz

-|   |   |   |-- gamin.SlackBuild

-|   |   |   |-- gaminrc.gz

-|   |   |   `-- slack-desc

-|   |   |-- gd

-|   |   |   |-- gd-2.0.35.tar.bz2

-|   |   |   |-- gd.SlackBuild

-|   |   |   |-- gd.png14.diff.gz

-|   |   |   |-- gdlib.pc

-|   |   |   `-- slack-desc

-|   |   |-- gdbm

-|   |   |   |-- gdbm-1.8.3.tar.gz

-|   |   |   |-- gdbm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gdk-pixbuf2

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gdk-pixbuf-2.23.3.tar.xz

-|   |   |   |-- gdk-pixbuf.pnglz.diff.gz

-|   |   |   |-- gdk-pixbuf2.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- update-gdk-pixbuf-loaders

-|   |   |-- gegl

-|   |   |   |-- gegl-0.1.2.tar.xz

-|   |   |   |-- gegl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- giflib

-|   |   |   |-- giflib-4.1.6.tar.xz

-|   |   |   |-- giflib.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- glib

-|   |   |   |-- glib-1.2.10.tar.bz2

-|   |   |   |-- glib.SlackBuild

-|   |   |   |-- glib1.2_1.2.10-17.diff.bz2

-|   |   |   `-- slack-desc

-|   |   |-- glib2

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- glib-2.28.6.tar.xz

-|   |   |   |-- glib2.SlackBuild

-|   |   |   |-- libglib2.csh

-|   |   |   |-- libglib2.sh

-|   |   |   `-- slack-desc

-|   |   |-- glibc

-|   |   |   |-- doinst.sh-glibc

-|   |   |   |-- doinst.sh-glibc-solibs

-|   |   |   |-- doinst.sh-glibc-zoneinfo

-|   |   |   |-- glibc-2.10-dns-no-gethostbyname4.diff.gz

-|   |   |   |-- glibc-2.13.tar.xz

-|   |   |   |-- glibc-2.13.tar.xz.sig

-|   |   |   |-- glibc-cvs-checkout.sh

-|   |   |   |-- glibc.SlackBuild

-|   |   |   |-- glibc.disable.broken.optimized.memcpy.diff.gz

-|   |   |   |-- glibc.getcwd.max.macro.diff.gz

-|   |   |   |-- glibc.git-4a531bb0b3b582cb693de9f76d2d97d970f9a5d5.patch.gz

-|   |   |   |-- glibc.git-96611391ad8823ba58405325d78cefeae5cdf699-CVE-2010-3847b.patch.gz

-|   |   |   |-- glibc.ldd.trace.through.dynamic.linker.diff.gz

-|   |   |   |-- glibc.locale.no-archive.diff.gz

-|   |   |   |-- glibc.make-3.82.diff.gz

-|   |   |   |-- glibc.nis-netgroups.diff.gz

-|   |   |   |-- glibc.revert.to.fix.build.breakages.diff.gz

-|   |   |   |-- glibc.ru_RU.CP1251.diff.gz

-|   |   |   |-- is_IS.diff.gz

-|   |   |   |-- profile.d

-|   |   |   |   |-- glibc.csh.new

-|   |   |   |   `-- glibc.sh.new

-|   |   |   |-- slack-desc.glibc

-|   |   |   |-- slack-desc.glibc-debug

-|   |   |   |-- slack-desc.glibc-i18n

-|   |   |   |-- slack-desc.glibc-profile

-|   |   |   |-- slack-desc.glibc-solibs

-|   |   |   |-- slack-desc.glibc-solibs-linuxthreads

-|   |   |   |-- slack-desc.glibc-zoneinfo

-|   |   |   |-- timezone-scripts

-|   |   |   |   |-- output-updated-timeconfig.sh

-|   |   |   |   |-- parts

-|   |   |   |   |   |-- 00

-|   |   |   |   |   |-- 01

-|   |   |   |   |   |-- 02

-|   |   |   |   |   |-- 03

-|   |   |   |   |   |-- 04

-|   |   |   |   |   `-- README

-|   |   |   |   |-- setup.timeconfig

-|   |   |   |   `-- timeconfig

-|   |   |   |-- tzcode2011d.tar.gz

-|   |   |   `-- tzdata2011d.tar.gz

-|   |   |-- gmime

-|   |   |   |-- gmime-2.4.15.tar.xz

-|   |   |   |-- gmime.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gmm

-|   |   |   |-- gmm-3.1.tar.bz2

-|   |   |   |-- gmm.SlackBuild

-|   |   |   |-- gmm.info

-|   |   |   `-- slack-desc

-|   |   |-- gmp

-|   |   |   |-- gmp-5.0.1.tar.xz

-|   |   |   |-- gmp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gnome-icon-theme

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gnome-icon-theme-2.31.0.tar.xz

-|   |   |   |-- gnome-icon-theme.SlackBuild

-|   |   |   |-- gnome-icon-theme.pkgconfig.path.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- gst-plugins-base

-|   |   |   |-- gst-plugins-base-0.10.32.tar.xz

-|   |   |   |-- gst-plugins-base.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gst-plugins-good

-|   |   |   |-- gst-plugins-good-0.10.28.tar.xz

-|   |   |   |-- gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff.gz

-|   |   |   |-- gst-plugins-good.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gstreamer

-|   |   |   |-- gstreamer-0.10.32.tar.xz

-|   |   |   |-- gstreamer.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gtk+

-|   |   |   |-- gtk+-1.2.10.tar.bz2

-|   |   |   |-- gtk+.SlackBuild

-|   |   |   |-- gtk+1.2_1.2.10-18.diff.bz2

-|   |   |   `-- slack-desc

-|   |   |-- gtk+2

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fix_build_issues_on_tutorial_and_faq.diff.gz

-|   |   |   |-- gtk+-2.24.4.tar.xz

-|   |   |   |-- gtk+-2.24.x.icon-compat.am.diff.gz

-|   |   |   |-- gtk+-2.24.x.icon-compat.diff.gz

-|   |   |   |-- gtk+2.SlackBuild

-|   |   |   |-- gtk.xid.nowarningflood.diff.gz

-|   |   |   |-- profile.d

-|   |   |   |   |-- gtk+.csh

-|   |   |   |   `-- gtk+.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- update-gtk-immodules

-|   |   |   |-- update-gtk-immodules-2.0

-|   |   |   `-- use_host_triplet_for_gtk_immodules.diff.gz

-|   |   |-- gtkspell

-|   |   |   |-- gtkspell-2.0.16.tar.xz

-|   |   |   |-- gtkspell.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- hal

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- hal-0.5.14.tar.xz

-|   |   |   |-- hal.SlackBuild

-|   |   |   |-- hal.conf.gz

-|   |   |   |-- patches

-|   |   |   |   |-- 10-keymap.fdi-restore_zap.diff.gz

-|   |   |   |   |-- fix-build-with-automake-1.11.1.patch.gz

-|   |   |   |   |-- fix-hal-segfault.patch.gz

-|   |   |   |   |-- fix_ioperm_arguments.patch.gz

-|   |   |   |   |-- fix_libusb_detection.diff.gz

-|   |   |   |   |-- fix_segfault-dbus_error_init.patch.gz

-|   |   |   |   |-- fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz

-|   |   |   |   |-- handle_input.touchpad_explicitly.diff.gz

-|   |   |   |   |-- ignore_internal_dm_devices.diff.gz

-|   |   |   |   `-- increase_HAL_PATH_MAX_to_4096.diff.gz

-|   |   |   |-- rc.hald.gz

-|   |   |   `-- slack-desc

-|   |   |-- hal-info

-|   |   |   |-- hal-info-20091130.tar.bz2

-|   |   |   |-- hal-info.SlackBuild

-|   |   |   |-- patches

-|   |   |   |   |-- quirk-LG_X110-keyboard.patch.gz

-|   |   |   |   `-- quirk-acer_aspire_hotkey.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- hicolor-icon-theme

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- hicolor-icon-theme-0.12.tar.gz

-|   |   |   |-- hicolor-icon-theme.SlackBuild

-|   |   |   |-- setup.08.gtk-update-icon-cache

-|   |   |   `-- slack-desc

-|   |   |-- hunspell

-|   |   |   |-- hunspell-1.2.9.tar.xz

-|   |   |   |-- hunspell.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- icon-naming-utils

-|   |   |   |-- icon-naming-utils-0.8.90.tar.gz

-|   |   |   |-- icon-naming-utils.SlackBuild

-|   |   |   |-- icon-naming-utils.pkgconfigdir.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- ilmbase

-|   |   |   |-- ilmbase-1.0.2.tar.xz

-|   |   |   |-- ilmbase.SlackBuild

-|   |   |   |-- ilmbase.gcc4.diff.gz

-|   |   |   |-- ilmbase.info

-|   |   |   `-- slack-desc

-|   |   |-- imlib

-|   |   |   |-- imlib-1.9.15.tar.xz

-|   |   |   |-- imlib.SlackBuild

-|   |   |   |-- imlib.mitshm.render.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- iso-codes

-|   |   |   |-- iso-codes-3.24.2.tar.bz2

-|   |   |   |-- iso-codes-3.24.2.tar.bz2.sig

-|   |   |   |-- iso-codes.SlackBuild

-|   |   |   |-- iso-codes.info

-|   |   |   `-- slack-desc

-|   |   |-- jasper

-|   |   |   |-- jasper-1.900.1.tar.bz2

-|   |   |   |-- jasper.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- jre -> ../local/jre

-|   |   |-- lcms

-|   |   |   |-- lcms-1.19.tar.xz

-|   |   |   |-- lcms.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- lesstif

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lesstif-0.95.2.tar.xz

-|   |   |   |-- lesstif.Makefile.in.patch.gz

-|   |   |   |-- lesstif.PutPixel32.patch.gz

-|   |   |   |-- lesstif.SlackBuild

-|   |   |   |-- lesstif.rendertable.check.diff.gz

-|   |   |   |-- lesstif.x86_64.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- libaio

-|   |   |   |-- libaio-0.3.109.tar.bz2

-|   |   |   |-- libaio-0.3.109.tar.sign

-|   |   |   |-- libaio.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libao

-|   |   |   |-- libao-1.1.0.tar.gz

-|   |   |   |-- libao.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libarchive

-|   |   |   |-- libarchive-2.8.4.tar.xz

-|   |   |   |-- libarchive.SlackBuild

-|   |   |   |-- libarchive.info

-|   |   |   `-- slack-desc

-|   |   |-- libart_lgpl

-|   |   |   |-- libart_lgpl-2.3.21.tar.xz

-|   |   |   |-- libart_lgpl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libcaca

-|   |   |   |-- libcaca-0.99.beta16.tar.bz2

-|   |   |   |-- libcaca.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libcap

-|   |   |   |-- README.SLACKWARE

-|   |   |   |-- capfaq-0.2.txt

-|   |   |   |-- libcap-2.20.tar.sign

-|   |   |   |-- libcap-2.20.tar.xz

-|   |   |   |-- libcap.SlackBuild

-|   |   |   |-- libcap.capability.h.fix.broken.includes.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- libcddb

-|   |   |   |-- libcddb-1.3.2.tar.xz

-|   |   |   |-- libcddb.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libcdio

-|   |   |   |-- libcdio-0.79.tar.bz2

-|   |   |   |-- libcdio.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libdbusmenu-qt

-|   |   |   |-- libdbusmenu-qt-0.6.4.tar.xz

-|   |   |   |-- libdbusmenu-qt.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libdiscid

-|   |   |   |-- libdiscid-0.2.2.tar.gz

-|   |   |   |-- libdiscid.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libdvdread

-|   |   |   |-- libdvdread-4.1.3.tar.bz2

-|   |   |   |-- libdvdread.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libelf

-|   |   |   |-- libelf-0.8.13.tar.xz

-|   |   |   |-- libelf.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libexif

-|   |   |   |-- libexif-0.6.20.tar.xz

-|   |   |   |-- libexif.SlackBuild

-|   |   |   |-- libexif.pc.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- libglade

-|   |   |   |-- libglade-2.6.4.tar.bz2

-|   |   |   |-- libglade.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libgphoto2

-|   |   |   |-- libgphoto2-2.4.10.1.tar.xz

-|   |   |   |-- libgphoto2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libgpod

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- libgpod-0.8.0.tar.xz

-|   |   |   |-- libgpod.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libgsf

-|   |   |   |-- libgsf-1.14.20.tar.xz

-|   |   |   |-- libgsf.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libical

-|   |   |   |-- README

-|   |   |   |-- libical-0.44.tar.xz

-|   |   |   |-- libical.SlackBuild

-|   |   |   |-- libical.info

-|   |   |   `-- slack-desc

-|   |   |-- libid3tag

-|   |   |   |-- id3tag.pc

-|   |   |   |-- libid3tag-0.15.1b.tar.gz

-|   |   |   |-- libid3tag-0.15.1b.tar.gz.sign

-|   |   |   |-- libid3tag.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libidl

-|   |   |   |-- libIDL-0.8.14.tar.xz

-|   |   |   |-- libidl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libidn

-|   |   |   |-- libidn-1.19.tar.xz

-|   |   |   |-- libidn.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libieee1284

-|   |   |   |-- libieee1284-0.2.11.tar.bz2

-|   |   |   |-- libieee1284.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libiodbc

-|   |   |   |-- libiodbc-3.52.7.tar.xz

-|   |   |   |-- libiodbc.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libjpeg

-|   |   |   |-- jpegsrc.v8a.tar.xz

-|   |   |   |-- libjpeg.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libkarma

-|   |   |   |-- libkarma-0.1.1.tar.gz

-|   |   |   |-- libkarma.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- liblastfm

-|   |   |   |-- liblastfm-0.3.3_f0b3239.tar.xz

-|   |   |   |-- liblastfm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmad

-|   |   |   |-- libmad-0.15.1b.tar.gz

-|   |   |   |-- libmad-0.15.1b.tar.gz.sign

-|   |   |   |-- libmad.SlackBuild

-|   |   |   |-- mad.pc

-|   |   |   `-- slack-desc

-|   |   |-- libmcrypt

-|   |   |   |-- libmcrypt-2.5.8.tar.bz2

-|   |   |   |-- libmcrypt.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmcs

-|   |   |   |-- libmcs-0.7.2.tar.bz2

-|   |   |   |-- libmcs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmng

-|   |   |   |-- libmng-1.0.10.tar.xz

-|   |   |   |-- libmng.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmowgli

-|   |   |   |-- libmowgli-0.7.1.tar.bz2

-|   |   |   |-- libmowgli.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmpc

-|   |   |   |-- libmpc.SlackBuild

-|   |   |   |-- mpc-0.8.2.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- libmsn

-|   |   |   |-- libmsn-4.1.tar.bz2

-|   |   |   |-- libmsn.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libmtp

-|   |   |   |-- libmtp-1.0.1.tar.xz

-|   |   |   |-- libmtp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libnjb

-|   |   |   |-- 80-libnjb.rules

-|   |   |   |-- libnjb-2.2.6.tar.bz2

-|   |   |   |-- libnjb.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libnl

-|   |   |   |-- libnl-1.1.tar.bz2

-|   |   |   |-- libnl-include_limits.h.patch.gz

-|   |   |   |-- libnl.SlackBuild

-|   |   |   |-- libnl.info

-|   |   |   `-- slack-desc

-|   |   |-- libnotify

-|   |   |   |-- libnotify-0.5.2.tar.bz2

-|   |   |   |-- libnotify.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libogg

-|   |   |   |-- libogg-1.2.2.tar.xz

-|   |   |   |-- libogg.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- liboggz

-|   |   |   |-- liboggz-1.1.1.tar.xz

-|   |   |   |-- liboggz.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- liboil

-|   |   |   |-- liboil-0.3.17.tar.xz

-|   |   |   |-- liboil.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libpcap

-|   |   |   |-- libpcap-1.1.1.tar.gz

-|   |   |   |-- libpcap-1.1.1.tar.gz.sig

-|   |   |   |-- libpcap.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libplist

-|   |   |   |-- libplist-1.3.tar.bz2

-|   |   |   |-- libplist.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libpng

-|   |   |   |-- libpng-1.2.44.tar.xz

-|   |   |   |-- libpng-1.4.5.tar.xz

-|   |   |   |-- libpng.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libraw1394

-|   |   |   |-- README

-|   |   |   |-- libraw1394-2.0.7.tar.sign

-|   |   |   |-- libraw1394-2.0.7.tar.xz

-|   |   |   |-- libraw1394.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- librsvg

-|   |   |   |-- librsvg-2.32.0.tar.bz2

-|   |   |   |-- librsvg.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libsamplerate

-|   |   |   |-- libsamplerate-0.1.7.tar.xz

-|   |   |   |-- libsamplerate.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libsndfile

-|   |   |   |-- libsndfile-1.0.24.tar.xz

-|   |   |   |-- libsndfile.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libspectre

-|   |   |   |-- libspectre-0.2.5.tar.bz2

-|   |   |   |-- libspectre.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libtermcap

-|   |   |   |-- libtermcap.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- termcap-compat_1.2.3.diff.gz

-|   |   |   |-- termcap-compat_1.2.3.dsc

-|   |   |   |-- termcap-compat_1.2.3.tar.gz

-|   |   |   |-- termcap.bufsize.diff.gz

-|   |   |   `-- termcap.h.diff.gz

-|   |   |-- libtheora

-|   |   |   |-- libtheora-1.1.1.tar.xz

-|   |   |   |-- libtheora.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libtiff

-|   |   |   |-- libtiff-CVE-2011-0192.patch.gz

-|   |   |   |-- libtiff-CVE-2011-1167.patch.gz

-|   |   |   |-- libtiff.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- tiff-3.9.4.tar.xz

-|   |   |-- libusb

-|   |   |   |-- libusb-1.0.8.tar.bz2

-|   |   |   |-- libusb-compat-0.1.3.tar.bz2

-|   |   |   |-- libusb.SlackBuild

-|   |   |   |-- libusb.fix.debug.log.level.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- libvisual

-|   |   |   |-- libvisual-0.4.0.tar.bz2

-|   |   |   |-- libvisual.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libvisual-plugins

-|   |   |   |-- libvisual-plugins-0.4.0.tar.bz2

-|   |   |   |-- libvisual-plugins.SlackBuild

-|   |   |   |-- libvisual-plugins.gstreamer.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- libvncserver

-|   |   |   |-- LibVNCServer-0.9.7.tar.bz2

-|   |   |   |-- libvncserver.SlackBuild

-|   |   |   |-- libvncserver.info

-|   |   |   `-- slack-desc

-|   |   |-- libvorbis

-|   |   |   |-- libvorbis-1.3.2.tar.xz

-|   |   |   |-- libvorbis.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libwmf

-|   |   |   |-- libwmf-0.2.8.4.tar.xz

-|   |   |   |-- libwmf.SlackBuild

-|   |   |   |-- libwmf.png14.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- slack-desc-docs

-|   |   |-- libwnck

-|   |   |   |-- libwnck-2.30.6.tar.xz

-|   |   |   |-- libwnck.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libwpd

-|   |   |   |-- libwpd-0.8.14.tar.bz2

-|   |   |   |-- libwpd.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libxklavier

-|   |   |   |-- libxklavier-5.1.tar.xz

-|   |   |   |-- libxklavier.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libxml2

-|   |   |   |-- libxml2-2.7.8.broken.versioning.diff.gz

-|   |   |   |-- libxml2-2.7.8.tar.xz

-|   |   |   |-- libxml2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libxslt

-|   |   |   |-- libxslt-1.1.26.tar.xz

-|   |   |   |-- libxslt.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libzip

-|   |   |   |-- libzip-0.9.3.tar.bz2

-|   |   |   |-- libzip.SlackBuild

-|   |   |   |-- libzip.info

-|   |   |   `-- slack-desc

-|   |   |-- loudmouth

-|   |   |   |-- loudmouth-1.4.3.tar.xz

-|   |   |   |-- loudmouth.SlackBuild

-|   |   |   |-- loudmouth.async_assertion.diff.gz

-|   |   |   |-- loudmouth.crtpath.diff.gz

-|   |   |   |-- loudmouth.gnutls.configure.ac.diff.gz

-|   |   |   |-- loudmouth.sasl-md5-digest-uri.diff.gz

-|   |   |   |-- loudmouth.stanzadrop.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- lzo

-|   |   |   |-- lzo-2.03.tar.xz

-|   |   |   |-- lzo.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mhash

-|   |   |   |-- mhash-0.9.9.9.tar.bz2

-|   |   |   |-- mhash.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mm

-|   |   |   |-- mm-1.4.2.tar.bz2

-|   |   |   |-- mm.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mpfr

-|   |   |   |-- mpfr-3.0.1.tar.xz

-|   |   |   |-- mpfr.SlackBuild

-|   |   |   |-- patches

-|   |   |   `-- slack-desc

-|   |   |-- ncurses

-|   |   |   |-- Eterm.ti

-|   |   |   |-- ncurses-5.9.tar.xz

-|   |   |   |-- ncurses.SlackBuild

-|   |   |   |-- ncurses.mkhashsize.diff.gz

-|   |   |   |-- patches

-|   |   |   |-- rxvt.terminfo

-|   |   |   |-- screeninfo.src

-|   |   |   |-- slack-desc

-|   |   |   `-- xterm.terminfo

-|   |   |-- neon

-|   |   |   |-- neon-0.29.5.tar.gz

-|   |   |   |-- neon.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netpbm

-|   |   |   |-- config.mk.gz

-|   |   |   |-- netpbm-10.49.02.tar.xz

-|   |   |   |-- netpbm-manpages.tar.bz2

-|   |   |   |-- netpbm.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- svn-checkout-stable.sh

-|   |   |-- notify-python

-|   |   |   |-- notify-python-0.1.1.tar.bz2

-|   |   |   |-- notify-python.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- openexr

-|   |   |   |-- openexr-1.7.0.tar.xz

-|   |   |   |-- openexr.SlackBuild

-|   |   |   |-- openexr.gcc4.diff.gz

-|   |   |   |-- openexr.info

-|   |   |   `-- slack-desc

-|   |   |-- pango

-|   |   |   |-- pango-1.28.4.tar.xz

-|   |   |   |-- pango.SlackBuild

-|   |   |   |-- pango.etc.host.location.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   `-- update-pango-querymodules

-|   |   |-- parted

-|   |   |   |-- parted-2.3.tar.xz

-|   |   |   |-- parted.SlackBuild

-|   |   |   |-- parted.SlackBuild.static

-|   |   |   |-- parted.configure.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- pcre

-|   |   |   |-- pcre-8.12.tar.xz

-|   |   |   |-- pcre.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- phonon

-|   |   |   |-- phonon-4.4.3.tar.bz2

-|   |   |   |-- phonon.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- phonon-mplayer

-|   |   |   |-- cmake_fixes.tar.gz

-|   |   |   |-- phonon-mplayer-20101213.tar.xz

-|   |   |   |-- phonon-mplayer.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pil

-|   |   |   |-- Imaging-1.1.7.tar.xz

-|   |   |   |-- pil.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pilot-link

-|   |   |   |-- pilot-link-0.12.5.tar.bz2

-|   |   |   |-- pilot-link-0.12.5.tar.bz2.asc

-|   |   |   |-- pilot-link.SlackBuild

-|   |   |   |-- pilot-link.png14.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- polkit

-|   |   |   |-- CVE-2011-1485

-|   |   |   |   |-- 0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch

-|   |   |   |   |-- 0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch

-|   |   |   |   |-- 0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch

-|   |   |   |   `-- 0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch

-|   |   |   |-- polkit-0.101.tar.xz

-|   |   |   |-- polkit.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- polkit-gnome

-|   |   |   |-- polkit-gnome-0.101.tar.xz

-|   |   |   |-- polkit-gnome-authentication-agent-1.desktop

-|   |   |   |-- polkit-gnome.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- poppler

-|   |   |   |-- poppler-0.16.4.tar.xz

-|   |   |   |-- poppler.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- poppler-data

-|   |   |   |-- poppler-data-0.4.4.tar.xz

-|   |   |   |-- poppler-data.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- popt

-|   |   |   |-- popt-1.7.tar.bz2

-|   |   |   |-- popt.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pycairo

-|   |   |   |-- py2cairo-1.8.10.tar.xz

-|   |   |   |-- pycairo.SlackBuild

-|   |   |   |-- pycairo.url

-|   |   |   `-- slack-desc

-|   |   |-- pycups

-|   |   |   |-- pycups-1.9.55.tar.bz2

-|   |   |   |-- pycups.SlackBuild

-|   |   |   |-- pycups.info

-|   |   |   `-- slack-desc

-|   |   |-- pygobject

-|   |   |   |-- pygobject-2.26.0.tar.bz2

-|   |   |   |-- pygobject.SlackBuild

-|   |   |   |-- pygobject.fix.no.introspection.crash.diff.gz

-|   |   |   |-- pygobject.url

-|   |   |   `-- slack-desc

-|   |   |-- pygtk

-|   |   |   |-- pygtk-2.22.0.tar.bz2

-|   |   |   |-- pygtk.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pyrex

-|   |   |   |-- Pyrex-0.9.9.tar.xz

-|   |   |   |-- Pyrex.url

-|   |   |   |-- pyrex.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- qca

-|   |   |   |-- qca-2.0.2.tar.bz2

-|   |   |   |-- qca.SlackBuild

-|   |   |   |-- qca.info

-|   |   |   `-- slack-desc

-|   |   |-- qca-cyrus-sasl

-|   |   |   |-- qca-cyrus-sasl-2.0.0-beta3.tar.bz2

-|   |   |   |-- qca-cyrus-sasl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- qca-gnupg

-|   |   |   |-- qca-gnupg-2.0.0-beta3.tar.bz2

-|   |   |   |-- qca-gnupg.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- qca-ossl

-|   |   |   |-- qca-ossl-2.0.0-beta3.tar.bz2

-|   |   |   |-- qca-ossl.SlackBuild

-|   |   |   |-- qca-ossl.nowhirlpool.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- qimageblitz

-|   |   |   |-- qimageblitz-0.0.6.tar.bz2

-|   |   |   |-- qimageblitz.SlackBuild

-|   |   |   |-- qimageblitz.info

-|   |   |   `-- slack-desc

-|   |   |-- qt

-|   |   |   |-- README

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- profile.d

-|   |   |   |   |-- qt4.csh

-|   |   |   |   `-- qt4.sh

-|   |   |   |-- qt-4.7.0_7abde40.tar.xz

-|   |   |   |-- qt.QSortFilterProxyModel.reformatted.diff.gz

-|   |   |   |-- qt.SlackBuild

-|   |   |   |-- qt.blacklist.bad.certs.diff.gz

-|   |   |   |-- qt.blacklist.bad.certs.patch02.diff.gz

-|   |   |   |-- qt.mysql.h.diff.gz

-|   |   |   |-- qt.x86.cflags.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- qtscriptgenerator

-|   |   |   |-- include-everything.patch.gz

-|   |   |   |-- qtscriptgenerator-src-0.1.0.tar.gz

-|   |   |   |-- qtscriptgenerator.SlackBuild

-|   |   |   |-- qtscriptgenerator.gcc44.diff.gz

-|   |   |   |-- qtscriptgenerator.info

-|   |   |   `-- slack-desc

-|   |   |-- raptor

-|   |   |   |-- raptor-1.4.21.tar.xz

-|   |   |   |-- raptor.SlackBuild

-|   |   |   |-- raptor.info

-|   |   |   `-- slack-desc

-|   |   |-- raptor2

-|   |   |   |-- raptor2-2.0.0.tar.xz

-|   |   |   |-- raptor2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rasqal

-|   |   |   |-- rasqal-0.9.21.tar.xz

-|   |   |   |-- rasqal.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- readline

-|   |   |   |-- readline-5.2-patches

-|   |   |   |   |-- readline52-001

-|   |   |   |   |-- readline52-001.sig

-|   |   |   |   |-- readline52-002

-|   |   |   |   |-- readline52-002.sig

-|   |   |   |   |-- readline52-003

-|   |   |   |   |-- readline52-003.sig

-|   |   |   |   |-- readline52-004

-|   |   |   |   |-- readline52-004.sig

-|   |   |   |   |-- readline52-005

-|   |   |   |   |-- readline52-005.sig

-|   |   |   |   |-- readline52-006

-|   |   |   |   |-- readline52-006.sig

-|   |   |   |   |-- readline52-007

-|   |   |   |   |-- readline52-007.sig

-|   |   |   |   |-- readline52-008

-|   |   |   |   |-- readline52-008.sig

-|   |   |   |   |-- readline52-009

-|   |   |   |   |-- readline52-009.sig

-|   |   |   |   |-- readline52-010

-|   |   |   |   |-- readline52-010.sig

-|   |   |   |   |-- readline52-011

-|   |   |   |   |-- readline52-011.sig

-|   |   |   |   |-- readline52-012

-|   |   |   |   |-- readline52-012.sig

-|   |   |   |   |-- readline52-013

-|   |   |   |   `-- readline52-013.sig

-|   |   |   |-- readline-5.2.tar.bz2

-|   |   |   |-- readline.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- redland

-|   |   |   |-- redland-1.0.12.tar.xz

-|   |   |   |-- redland.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- sdl

-|   |   |   |-- SDL-1.2.14.tar.xz

-|   |   |   |-- SDL_image-1.2.10.tar.xz

-|   |   |   |-- SDL_mixer-1.2.11.tar.xz

-|   |   |   |-- SDL_mixer.usrlocal.diff.gz

-|   |   |   |-- SDL_net-1.2.7.tar.xz

-|   |   |   |-- SDL_ttf-2.0.10.tar.xz

-|   |   |   |-- sdl.SlackBuild

-|   |   |   |-- sdl.linux-2.6.31.input_absinfo.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- shared-desktop-ontologies

-|   |   |   |-- shared-desktop-ontologies-0.5.tar.bz2

-|   |   |   |-- shared-desktop-ontologies.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- shared-mime-info

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- shared-mime-info-0.90.tar.bz2

-|   |   |   |-- shared-mime-info.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- sip

-|   |   |   |-- sip-4.11.2.tar.xz

-|   |   |   |-- sip.SlackBuild

-|   |   |   |-- sip.info

-|   |   |   `-- slack-desc

-|   |   |-- slang

-|   |   |   |-- slack-desc

-|   |   |   |-- slang-2.2.3.tar.bz2

-|   |   |   |-- slang-2.2.3.tar.bz2.asc

-|   |   |   `-- slang.SlackBuild

-|   |   |-- slang1

-|   |   |   |-- slack-desc

-|   |   |   |-- slang-1.4.9.tar.bz2

-|   |   |   `-- slang1.SlackBuild

-|   |   |-- soprano

-|   |   |   |-- slack-desc

-|   |   |   |-- soprano-2.5.2.tar.bz2

-|   |   |   `-- soprano.SlackBuild

-|   |   |-- startup-notification

-|   |   |   |-- slack-desc

-|   |   |   |-- startup-notification-0.10.tar.bz2

-|   |   |   `-- startup-notification.SlackBuild

-|   |   |-- strigi

-|   |   |   |-- slack-desc

-|   |   |   |-- strigi-0.7.2.tar.bz2

-|   |   |   |-- strigi.SlackBuild

-|   |   |   `-- strigi.info

-|   |   |-- svgalib

-|   |   |   |-- slack-desc

-|   |   |   |-- svgalib-1.9.25-kernel-2.6.26.diff.gz

-|   |   |   |-- svgalib-1.9.25.tar.bz2

-|   |   |   |-- svgalib.SlackBuild

-|   |   |   |-- svgalib.nohelper.diff.gz

-|   |   |   `-- svgalib.prefix.diff.gz

-|   |   |-- system-config-printer

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- system-config-printer-1.2.7.tar.xz

-|   |   |   |-- system-config-printer-1.2.7.tar.xz.sig

-|   |   |   `-- system-config-printer.SlackBuild

-|   |   |-- t1lib

-|   |   |   |-- slack-desc

-|   |   |   |-- t1lib-5.1.2.tar.xz

-|   |   |   |-- t1lib.SlackBuild

-|   |   |   `-- t1lib_5.1.2-3.diff.gz

-|   |   |-- taglib

-|   |   |   |-- slack-desc

-|   |   |   |-- taglib-1.6.3.tar.xz

-|   |   |   `-- taglib.SlackBuild

-|   |   |-- taglib-extras

-|   |   |   |-- slack-desc

-|   |   |   |-- taglib-extras-1.0.1.tar.gz

-|   |   |   `-- taglib-extras.SlackBuild

-|   |   |-- tango-icon-theme

-|   |   |   |-- slack-desc

-|   |   |   |-- tango-icon-theme-0.8.90.tar.bz2

-|   |   |   `-- tango-icon-theme.SlackBuild

-|   |   |-- tango-icon-theme-extras

-|   |   |   |-- slack-desc

-|   |   |   |-- tango-icon-theme-extras-0.1.0.tar.bz2

-|   |   |   `-- tango-icon-theme-extras.SlackBuild

-|   |   |-- urwid

-|   |   |   |-- LICENSE.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- urwid-0.9.9.1.tar.gz

-|   |   |   |-- urwid.SlackBuild

-|   |   |   `-- urwid.url

-|   |   |-- v4l-utils

-|   |   |   |-- slack-desc

-|   |   |   |-- v4l-utils-0.8.3.tar.xz

-|   |   |   `-- v4l-utils.SlackBuild

-|   |   |-- virtuoso-ose

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- virtuoso-opensource-6.1.2.tar.xz

-|   |   |   `-- virtuoso-ose.SlackBuild

-|   |   |-- vte

-|   |   |   |-- slack-desc

-|   |   |   |-- vte-0.26.2.tar.xz

-|   |   |   `-- vte.SlackBuild

-|   |   |-- wavpack

-|   |   |   |-- slack-desc

-|   |   |   |-- wavpack-4.60.1.tar.bz2

-|   |   |   `-- wavpack.SlackBuild

-|   |   |-- wv2

-|   |   |   |-- slack-desc

-|   |   |   |-- wv2-0.4.2.tar.xz

-|   |   |   `-- wv2.SlackBuild

-|   |   `-- zlib

-|   |       |-- slack-desc

-|   |       |-- zlib-1.2.5.tar.xz

-|   |       |-- zlib.SlackBuild

-|   |       `-- zlib.largefile64_source.diff.gz

-|   |-- local

-|   |   |-- README

-|   |   `-- jre

-|   |       |-- COPYRIGHT

-|   |       |-- README

-|   |       |-- THIRDPARTYLICENSEREADME.txt

-|   |       |-- Welcome.html

-|   |       |-- jre-6u25-linux-x64.bin

-|   |       |-- jre.SlackBuild

-|   |       |-- profile.d

-|   |       |   |-- jre.csh

-|   |       |   `-- jre.sh

-|   |       `-- slack-desc

-|   |-- n

-|   |   |-- alpine

-|   |   |   |-- alpine-2.00.tar.bz2

-|   |   |   |-- alpine.SlackBuild

-|   |   |   |-- alpine.config.h.diff.gz

-|   |   |   |-- alpine.manpage.diff.gz

-|   |   |   |-- alpine.tech-notes.txt.diff.gz

-|   |   |   |-- doinst.sh.alpine

-|   |   |   |-- pinepgp-0.18.0-makefile-sed-fix.diff.gz

-|   |   |   |-- pinepgp-0.18.0.tar.gz

-|   |   |   |-- pinepgp-0.18.0.tar.gz.sig

-|   |   |   |-- pinepgp.pinegpgp.in.diff.gz

-|   |   |   |-- slack-desc.alpine

-|   |   |   `-- slack-desc.imapd

-|   |   |-- autofs

-|   |   |   |-- autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz

-|   |   |   |-- autofs-5.0.5.tar.bz2

-|   |   |   |-- autofs.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- biff+comsat

-|   |   |   |-- biff+comsat-0.17.diff.gz

-|   |   |   |-- biff+comsat-0.17.tar.gz

-|   |   |   |-- biff+comsat.SlackBuild

-|   |   |   |-- biff+comsat.badutmp.diff.gz

-|   |   |   |-- biff+comsat.offset.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- bind

-|   |   |   |-- 3link.sh

-|   |   |   |-- bind-9.7.3.tar.gz

-|   |   |   |-- bind-9.7.3.tar.gz.asc

-|   |   |   |-- bind.SlackBuild

-|   |   |   |-- bind.so_bsdcompat.diff.gz

-|   |   |   |-- caching-example

-|   |   |   |   |-- localhost.zone

-|   |   |   |   |-- named.conf

-|   |   |   |   |-- named.local

-|   |   |   |   `-- named.root

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.bind

-|   |   |   `-- slack-desc

-|   |   |-- bluez

-|   |   |   |-- bluez-4.91.tar.sign

-|   |   |   |-- bluez-4.91.tar.xz

-|   |   |   |-- bluez.SlackBuild

-|   |   |   |-- config

-|   |   |   |   |-- bluetooth.modprobe

-|   |   |   |   |-- bluetooth.sh

-|   |   |   |   `-- rc.bluetooth

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- passkey-agent.c

-|   |   |   |-- patches

-|   |   |   |   |-- bluez-dbus-config.patch.gz

-|   |   |   |   |-- bluez-run_udev_helper.patch.gz

-|   |   |   |   `-- bluez-unbreak_dell_mouse.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- bluez-firmware

-|   |   |   |-- bluez-firmware-1.2.tar.bz2

-|   |   |   |-- bluez-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- bluez-hcidump

-|   |   |   |-- bluez-hcidump-2.0.tar.xz

-|   |   |   |-- bluez-hcidump.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- bootp

-|   |   |   |-- _bootp.tar.gz

-|   |   |   |-- bootp.SlackBuild

-|   |   |   |-- bootp_2.4.3-15.diff.gz

-|   |   |   |-- bootp_2.4.3.orig.tar.gz

-|   |   |   |-- bootptab.gz

-|   |   |   `-- slack-desc

-|   |   |-- bridge-utils

-|   |   |   |-- bridge-utils-1.4.tar.gz

-|   |   |   |-- bridge-utils.SlackBuild

-|   |   |   |-- bridge-utils.isbridge.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- bsd-finger

-|   |   |   |-- bsd-finger-0.17.diff.gz

-|   |   |   |-- bsd-finger-0.17.tar.gz

-|   |   |   |-- bsd-finger.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ca-certificates

-|   |   |   |-- ca-certificates.SlackBuild

-|   |   |   |-- ca-certificates_20090814.tar.gz

-|   |   |   |-- cacerts-20090814-fixup_DESTDIR.diff.gz

-|   |   |   |-- cacerts-20090814-fixup_update-ca-certificates.diff.gz

-|   |   |   |-- cacerts-20090814-remove_debconf.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- crda

-|   |   |   |-- crda-1.1.1.tar.bz2

-|   |   |   |-- crda.SlackBuild

-|   |   |   |-- get_regdb.sh

-|   |   |   |-- slack-desc

-|   |   |   `-- wireless-regdb-git_20100502.tar.bz2

-|   |   |-- curl

-|   |   |   |-- cacert.pem.bz2

-|   |   |   |-- curl-7.21.4.tar.bz2

-|   |   |   |-- curl-7.21.4.tar.bz2.asc

-|   |   |   |-- curl.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- cyrus-sasl

-|   |   |   |-- cyrus-sasl-2.1.23.tar.xz

-|   |   |   |-- cyrus-sasl.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.saslauthd.gz

-|   |   |   `-- slack-desc

-|   |   |-- dhcp

-|   |   |   |-- dhclient-script.PATH.diff.gz

-|   |   |   |-- dhcp-4.2.1-P1.tar.gz

-|   |   |   |-- dhcp-4.2.1-P1.tar.gz.asc

-|   |   |   |-- dhcp-remove-bind-tarball.sh

-|   |   |   |-- dhcp.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- dhcpcd

-|   |   |   |-- 50-ntp.conf.diff.gz

-|   |   |   |-- COPYRIGHT.gz

-|   |   |   |-- dhcpcd-5.2.11.tar.bz2

-|   |   |   |-- dhcpcd.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- dirmngr

-|   |   |   |-- dirmngr-1.1.0.tar.xz

-|   |   |   |-- dirmngr.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- dnsmasq

-|   |   |   |-- dnsmasq-2.57.tar.xz

-|   |   |   |-- dnsmasq.SlackBuild

-|   |   |   |-- dnsmasq.leasedir.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rc.dnsmasq.gz

-|   |   |   `-- slack-desc

-|   |   |-- elm

-|   |   |   |-- config.sh

-|   |   |   |-- elm.SlackBuild

-|   |   |   |-- elm2.5.8.tar.bz2

-|   |   |   `-- slack-desc

-|   |   |-- epic5

-|   |   |   |-- epic-help-current.tar.xz

-|   |   |   |-- epic5-1.1.2.tar.xz

-|   |   |   |-- epic5.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ethtool

-|   |   |   |-- ethtool-2.6.36.tar.xz

-|   |   |   |-- ethtool.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- fetchmail

-|   |   |   |-- fetchmail-6.3.19.tar.xz

-|   |   |   |-- fetchmail-6.3.19.tar.xz.asc

-|   |   |   |-- fetchmail.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- getmail

-|   |   |   |-- getmail-4.20.0.tar.gz

-|   |   |   |-- getmail.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gnupg

-|   |   |   |-- gnupg-1.4.11.tar.bz2

-|   |   |   |-- gnupg-1.4.11.tar.bz2.sig

-|   |   |   |-- gnupg.SlackBuild

-|   |   |   `-- slack-desc.gnupg

-|   |   |-- gnupg2

-|   |   |   |-- gnupg-2.0.17.tar.xz

-|   |   |   |-- gnupg2.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gnutls

-|   |   |   |-- gnutls-2.10.5.tar.xz

-|   |   |   |-- gnutls.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gpa

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gpa-0.7.5.tar.bz2

-|   |   |   |-- gpa.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gpgme

-|   |   |   |-- gpgme-1.3.0.tar.bz2

-|   |   |   |-- gpgme-1.3.0.tar.bz2.sig

-|   |   |   |-- gpgme.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- htdig

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- htdig-3.2.0b6.diff.gz

-|   |   |   |-- htdig-3.2.0b6.tar.bz2

-|   |   |   |-- htdig.SlackBuild

-|   |   |   |-- htdig.conf.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- httpd

-|   |   |   |-- README

-|   |   |   |-- config.layout.diff.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- httpd-2.2.17.tar.bz2

-|   |   |   |-- httpd-2.2.17.tar.bz2.asc

-|   |   |   |-- httpd.SlackBuild

-|   |   |   |-- httpd.brigade_move.__noinline__.gcc451.diff.gz

-|   |   |   |-- httpd.nossldefault.diff.gz

-|   |   |   |-- httpd.runasapache.diff.gz

-|   |   |   |-- httpd.url

-|   |   |   |-- logrotate.httpd

-|   |   |   |-- rc.httpd

-|   |   |   `-- slack-desc

-|   |   |-- icmpinfo

-|   |   |   |-- icmpinfo-1.11.diff.gz

-|   |   |   |-- icmpinfo-1.11.tar.gz

-|   |   |   |-- icmpinfo.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- idnkit

-|   |   |   |-- idnkit-1.0-src.tar.xz

-|   |   |   |-- idnkit.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- imapd -> alpine

-|   |   |-- inetd

-|   |   |   |-- _inetd.tar.gz

-|   |   |   |-- inetd-OpenBSD-1.79.diff.gz

-|   |   |   |-- inetd-OpenBSD-1.79.tar.gz

-|   |   |   |-- inetd.SlackBuild

-|   |   |   |-- inetd.loopingdos.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- iproute2

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- iproute2-2.6.37.tar.bz2

-|   |   |   |-- iproute2-2.6.37.tar.bz2.sig

-|   |   |   |-- iproute2.SlackBuild

-|   |   |   |-- iproute2.fixup_dbpath_and_iptablespath.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- iptables

-|   |   |   |-- iptables-1.4.10.tar.bz2

-|   |   |   |-- iptables.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iptraf-ng

-|   |   |   |-- iptraf-ng-1.0.2.tar.xz

-|   |   |   |-- iptraf-ng.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iputils

-|   |   |   |-- iputils-s20101006.tar.bz2

-|   |   |   |-- iputils.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- ipw2100-fw

-|   |   |   |-- ipw2100-fw-1.3.tar.bz2

-|   |   |   `-- ipw2100-fw.SlackBuild

-|   |   |-- ipw2200-fw

-|   |   |   |-- ipw2200-fw-3.1.tar.xz

-|   |   |   `-- ipw2200-fw.SlackBuild

-|   |   |-- irssi

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- irssi-0.8.15.tar.bz2

-|   |   |   |-- irssi-0.8.15.tar.bz2.sig

-|   |   |   |-- irssi.SlackBuild

-|   |   |   |-- irssi.manpage_fix.diff.gz

-|   |   |   |-- irssi.ssl_proxy.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- iw

-|   |   |   |-- iw-0.9.20.tar.bz2

-|   |   |   |-- iw.SlackBuild

-|   |   |   |-- iw.info

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-100-ucode

-|   |   |   |-- iwlwifi-100-ucode-39.31.5.1.tar.xz

-|   |   |   |-- iwlwifi-100-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-1000-ucode

-|   |   |   |-- iwlwifi-1000-ucode-128.50.3.1.tar.xz

-|   |   |   |-- iwlwifi-1000-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-3945-ucode

-|   |   |   |-- iwlwifi-3945-ucode-15.28.1.8.tar.bz2

-|   |   |   |-- iwlwifi-3945-ucode-15.32.2.9.tar.bz2

-|   |   |   |-- iwlwifi-3945-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-4965-ucode

-|   |   |   |-- iwlwifi-4965-ucode-228.57.1.21.tar.bz2

-|   |   |   |-- iwlwifi-4965-ucode-228.61.2.24.tar.bz2

-|   |   |   |-- iwlwifi-4965-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-5000-ucode

-|   |   |   |-- iwlwifi-5000-ucode-5.4.A.11.tar.xz

-|   |   |   |-- iwlwifi-5000-ucode-8.24.2.12.tar.xz

-|   |   |   |-- iwlwifi-5000-ucode-8.83.5.1.tar.xz

-|   |   |   |-- iwlwifi-5000-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-5150-ucode

-|   |   |   |-- iwlwifi-5150-ucode-8.24.2.2.tar.bz2

-|   |   |   |-- iwlwifi-5150-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-6000-ucode

-|   |   |   |-- iwlwifi-6000-ucode-9.221.4.1.tar.xz

-|   |   |   |-- iwlwifi-6000-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- iwlwifi-6xxx-ucode

-|   |   |   |-- iwlwifi-6000g2a-ucode-17.168.5.2.tar.xz

-|   |   |   |-- iwlwifi-6000g2b-ucode-17.168.5.2.tar.xz

-|   |   |   |-- iwlwifi-6050-ucode-41.28.5.1.tar.xz

-|   |   |   |-- iwlwifi-6xxx-ucode.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- lftp

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lftp-4.2.2.tar.xz

-|   |   |   |-- lftp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libassuan

-|   |   |   |-- libassuan-2.0.1.tar.bz2

-|   |   |   |-- libassuan-2.0.1.tar.bz2.sig

-|   |   |   |-- libassuan.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libgcrypt

-|   |   |   |-- libgcrypt-1.4.6.tar.bz2

-|   |   |   |-- libgcrypt-1.4.6.tar.bz2.sig

-|   |   |   |-- libgcrypt.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libgpg-error

-|   |   |   |-- libgpg-error-1.9.tar.bz2

-|   |   |   |-- libgpg-error-1.9.tar.bz2.sig

-|   |   |   |-- libgpg-error.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libksba

-|   |   |   |-- libksba-1.2.0.tar.bz2

-|   |   |   |-- libksba-1.2.0.tar.bz2.sig

-|   |   |   |-- libksba.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- links

-|   |   |   |-- links-2.3pre1.tar.bz2

-|   |   |   |-- links.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- lynx

-|   |   |   |-- lynx.SlackBuild

-|   |   |   |-- lynx.cfg.diff.gz

-|   |   |   |-- lynx.path.diff.gz

-|   |   |   |-- lynx2.8.7.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- mailx

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mailx-12.4.tar.bz2

-|   |   |   |-- mailx.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mcabber

-|   |   |   |-- mcabber-0.10.1.tar.bz2

-|   |   |   |-- mcabber.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- metamail

-|   |   |   |-- metamail-2.7.tar.xz

-|   |   |   |-- metamail.SlackBuild

-|   |   |   |-- metamail.automake.diff.xz

-|   |   |   |-- metamail.uue.getline.diff.gz

-|   |   |   |-- metamail_2.7-54.diff.xz

-|   |   |   `-- slack-desc

-|   |   |-- mtr

-|   |   |   |-- mtr-0.80.tar.xz

-|   |   |   |-- mtr.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mutt

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- mutt-1.5.21.tar.xz

-|   |   |   |-- mutt.SlackBuild

-|   |   |   |-- mutt.gpgme.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- nc

-|   |   |   |-- nc-110-21.diff.gz

-|   |   |   |-- nc.SlackBuild

-|   |   |   |-- nc.diff.gz

-|   |   |   |-- nc110.tgz

-|   |   |   `-- slack-desc

-|   |   |-- ncftp

-|   |   |   |-- ncftp-3.2.5-src.tar.bz2

-|   |   |   |-- ncftp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- net-snmp

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- net-snmp-5.6.1.tar.xz

-|   |   |   |-- net-snmp.SlackBuild

-|   |   |   |-- net-snmp.net-snmp-create-v3-user.etc.snmpd.conf.diff.gz

-|   |   |   |-- rc.snmpd

-|   |   |   |-- slack-desc

-|   |   |   `-- snmpd.conf.gz

-|   |   |-- net-tools

-|   |   |   |-- ipmask.8

-|   |   |   |-- ipmask.c

-|   |   |   |-- net-tools-1.60.tar.bz2

-|   |   |   |-- net-tools.SlackBuild

-|   |   |   |-- net-tools.diff.gz

-|   |   |   |-- net-tools.mii-tool.string.diff.gz

-|   |   |   |-- net-tools.struct.x25_address.gcc4.diff.gz

-|   |   |   |-- net-tools.switch.default.gcc4.diff.gz

-|   |   |   |-- net-tools_1.60-23.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- netatalk

-|   |   |   |-- afppasswd

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- netatalk-2.0.5.tar.xz

-|   |   |   |-- netatalk.SlackBuild

-|   |   |   |-- netatalk.afpdconf.diff.gz

-|   |   |   |-- netatalk.etc2ps.diff.gz

-|   |   |   |-- netatalk.without_xfs.diff.gz

-|   |   |   |-- rc.atalk.new

-|   |   |   `-- slack-desc

-|   |   |-- netdate

-|   |   |   |-- netdate.SlackBuild

-|   |   |   |-- netdate.diff.gz

-|   |   |   |-- netdate.diff2.gz

-|   |   |   |-- netdate.tar.gz

-|   |   |   `-- slack-desc

-|   |   |-- netkit-bootparamd

-|   |   |   |-- netkit-bootparamd-0.17.tar.gz

-|   |   |   |-- netkit-bootparamd.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netkit-ftp

-|   |   |   |-- netkit-ftp-0.17.tar.gz

-|   |   |   |-- netkit-ftp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netkit-ntalk

-|   |   |   |-- netkit-ntalk-0.11.diff.gz

-|   |   |   |-- netkit-ntalk-0.11.tar.gz

-|   |   |   |-- netkit-ntalk-0.17.diff.gz

-|   |   |   |-- netkit-ntalk-0.17.tar.gz

-|   |   |   |-- netkit-ntalk.SlackBuild

-|   |   |   |-- ntalk-0.17-slackware-alt-talkd.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- netkit-routed

-|   |   |   |-- netkit-routed-0.17.diff.gz

-|   |   |   |-- netkit-routed-0.17.tar.gz

-|   |   |   |-- netkit-routed.SlackBuild

-|   |   |   |-- routed.18.candidate.final.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- netkit-rsh

-|   |   |   |-- netkit-rsh-0.17.tar.gz

-|   |   |   |-- netkit-rsh.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netkit-rusers

-|   |   |   |-- netkit-rusers-0.17.diff.gz

-|   |   |   |-- netkit-rusers-0.17.tar.gz

-|   |   |   |-- netkit-rusers.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netkit-rwall

-|   |   |   |-- netkit-rwall-0.17.tar.gz

-|   |   |   |-- netkit-rwall.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netkit-rwho

-|   |   |   |-- netkit-rwho-0.17.diff.gz

-|   |   |   |-- netkit-rwho-0.17.tar.gz

-|   |   |   |-- netkit-rwho.SlackBuild

-|   |   |   |-- rwhod_getloadavg.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- netkit-timed

-|   |   |   |-- netkit-timed-0.17.diff.gz

-|   |   |   |-- netkit-timed-0.17.tar.gz

-|   |   |   |-- netkit-timed.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netpipes

-|   |   |   |-- _netpipes.tar.gz

-|   |   |   |-- netpipes-4.2-export.tar.gz

-|   |   |   |-- netpipes.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- netwatch

-|   |   |   |-- netwatch-1.3.0-1.tar.gz

-|   |   |   |-- netwatch.SlackBuild

-|   |   |   |-- netwatch.makefile.diff.gz

-|   |   |   |-- netwatch.phonemyself.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- network-scripts

-|   |   |   |-- README.rc.inet1

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- manpages

-|   |   |   |   |-- rc.inet1.8

-|   |   |   |   `-- rc.inet1.conf.5

-|   |   |   |-- network-scripts.SlackBuild

-|   |   |   |-- scripts

-|   |   |   |   |-- HOSTNAME

-|   |   |   |   |-- host.conf

-|   |   |   |   |-- hosts

-|   |   |   |   |-- hosts.allow

-|   |   |   |   |-- hosts.deny

-|   |   |   |   |-- hosts.equiv

-|   |   |   |   |-- netconfig

-|   |   |   |   |-- networks

-|   |   |   |   |-- nntpserver

-|   |   |   |   |-- protocols

-|   |   |   |   |-- rc.inet1

-|   |   |   |   |-- rc.inet1.conf

-|   |   |   |   |-- rc.inet2

-|   |   |   |   |-- rc.ip_forward

-|   |   |   |   |-- resolv.conf

-|   |   |   |   `-- setup.netconfig

-|   |   |   `-- slack-desc

-|   |   |-- netwrite

-|   |   |   |-- netwrite-0.17.diff.gz

-|   |   |   |-- netwrite-0.17.tar.gz

-|   |   |   |-- netwrite.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- newspost

-|   |   |   |-- newspost-2.1.1.tar.gz

-|   |   |   |-- newspost.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- nfs-utils

-|   |   |   |-- _nfs-utils.tar.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- nfs-utils-1.2.3.tar.sign

-|   |   |   |-- nfs-utils-1.2.3.tar.xz

-|   |   |   |-- nfs-utils.SlackBuild

-|   |   |   |-- nfs-utils.lwrap.needs.lnsl.diff.gz

-|   |   |   |-- rc.nfsd

-|   |   |   `-- slack-desc

-|   |   |-- nmap

-|   |   |   |-- nmap-5.51.tar.xz

-|   |   |   |-- nmap.SlackBuild

-|   |   |   |-- nmap.ndiff.mandir.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- nn

-|   |   |   |-- NNTP.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- m-x86_64.h.gz

-|   |   |   |-- nn-6.7.3.tar.bz2

-|   |   |   |-- nn.SlackBuild

-|   |   |   |-- nn.badnntphost.diff.gz

-|   |   |   |-- nn.destdir.diff.gz

-|   |   |   |-- nn.diff.gz

-|   |   |   |-- nntpserver.gz

-|   |   |   `-- slack-desc

-|   |   |-- ntp

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- ntp-4.2.6p3.tar.xz

-|   |   |   |-- ntp.SlackBuild

-|   |   |   |-- ntp.conf

-|   |   |   |-- ntp.keys

-|   |   |   |-- ntp.nano.diff.gz

-|   |   |   |-- rc.ntpd

-|   |   |   `-- slack-desc

-|   |   |-- obex-data-server

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- obex-data-server-0.4.5.tar.bz2

-|   |   |   |-- obex-data-server.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- obexfs

-|   |   |   |-- obexfs-0.12.tar.bz2

-|   |   |   |-- obexfs.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- obexftp

-|   |   |   |-- obexftp-0.23.tar.bz2

-|   |   |   |-- obexftp.SlackBuild

-|   |   |   |-- ruby_rstringlen.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- openldap-client

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- openldap-2.4.23.tar.xz

-|   |   |   |-- openldap-client.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- openobex

-|   |   |   |-- openobex-1.5.tar.bz2

-|   |   |   |-- openobex.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- openssh

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- openssh-5.8p1.tar.gz

-|   |   |   |-- openssh-5.8p1.tar.gz.asc

-|   |   |   |-- openssh.SlackBuild

-|   |   |   |-- rc.sshd

-|   |   |   `-- slack-desc

-|   |   |-- openssl

-|   |   |   |-- certwatch.gz

-|   |   |   |-- doinst.sh-openssl-solibs.gz

-|   |   |   |-- doinst.sh-openssl.gz

-|   |   |   |-- openssl-0.9.8r.tar.xz

-|   |   |   |-- openssl.SlackBuild

-|   |   |   |-- openssl.optsx86.diff.gz

-|   |   |   |-- openssl.soname.diff.gz

-|   |   |   |-- slack-desc.openssl

-|   |   |   `-- slack-desc.openssl-solibs

-|   |   |-- openvpn

-|   |   |   |-- README

-|   |   |   |-- openvpn-2.1.4.tar.gz

-|   |   |   |-- openvpn-2.1.4.tar.gz.asc

-|   |   |   |-- openvpn.SlackBuild

-|   |   |   |-- openvpn.conf.sample

-|   |   |   `-- slack-desc

-|   |   |-- php

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fetch-php.sh

-|   |   |   |-- mod_php.conf.example

-|   |   |   |-- pear

-|   |   |   |-- php-5.3.6.tar.xz

-|   |   |   |-- php.SlackBuild

-|   |   |   |-- php.ini-development.diff.gz

-|   |   |   |-- php.session.save_path.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- pidentd

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- pidentd-3.0.19.tar.gz

-|   |   |   |-- pidentd-3.0.19.tar.gz.sig

-|   |   |   |-- pidentd.SlackBuild

-|   |   |   |-- pidentd.conf.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- pinentry

-|   |   |   |-- pinentry-0.8.1.tar.xz

-|   |   |   |-- pinentry.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- popa3d

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- popa3d-1.0.2.tar.gz

-|   |   |   |-- popa3d-1.0.2.tar.gz.sign

-|   |   |   |-- popa3d.SlackBuild

-|   |   |   |-- popa3d.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- portmap

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- portmap-6.0.tar.bz2

-|   |   |   |-- portmap.SlackBuild

-|   |   |   |-- portmap.lwrap.needs.lnsl.diff.gz

-|   |   |   |-- rc.rpc.gz

-|   |   |   `-- slack-desc

-|   |   |-- ppp

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- options.new.gz

-|   |   |   |-- ppp-2.4.5.tar.bz2

-|   |   |   |-- ppp.SlackBuild

-|   |   |   |-- ppp.slack.diff.gz

-|   |   |   |-- pppsetup-1.98.backupfiles.diff.gz

-|   |   |   |-- pppsetup-1.98.moredevs.diff.gz

-|   |   |   |-- pppsetup-1.98.pppoff.diff.gz

-|   |   |   |-- pppsetup-1.98.slack.diff.gz

-|   |   |   |-- pppsetup-1.98.tar.gz

-|   |   |   |-- radius.msdict.gz

-|   |   |   |-- radiusclient-0.3.2.tar.bz2

-|   |   |   |-- realms.gz

-|   |   |   |-- servers.gz

-|   |   |   `-- slack-desc

-|   |   |-- procmail

-|   |   |   |-- _procmail.tar.gz

-|   |   |   |-- procmail-3.22.tar.gz

-|   |   |   |-- procmail-3.22.tar.gz.sig

-|   |   |   |-- procmail.SlackBuild

-|   |   |   |-- procmail.lfs.diff.gz

-|   |   |   |-- procmail_3.22-5.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- proftpd

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- etc

-|   |   |   |   |-- ftpusers

-|   |   |   |   `-- proftpd.conf

-|   |   |   |-- proftpd-1.3.3e.tar.xz

-|   |   |   |-- proftpd.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pssh

-|   |   |   |-- pssh-2.2.tar.gz

-|   |   |   |-- pssh.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pth

-|   |   |   |-- pth-2.0.7.tar.bz2

-|   |   |   |-- pth.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rdist

-|   |   |   |-- rdist-6.1.5-00.linux.diff.gz

-|   |   |   |-- rdist-6.1.5-01.links.diff.gz

-|   |   |   |-- rdist-6.1.5-03.hardlink.diff.gz

-|   |   |   |-- rdist-6.1.5-04.bison.diff.gz

-|   |   |   |-- rdist-6.1.5-05.varargs.diff.gz

-|   |   |   |-- rdist-6.1.5-06.maxargs.diff.gz

-|   |   |   |-- rdist-6.1.5-07.lfs.diff.gz

-|   |   |   |-- rdist-6.1.5-08.cleanup.diff.gz

-|   |   |   |-- rdist-6.1.5-09.svr4.diff.gz

-|   |   |   |-- rdist-6.1.5-10.ssh.diff.gz

-|   |   |   |-- rdist-6.1.5-11.mkstemp.diff.gz

-|   |   |   |-- rdist-6.1.5-12.stat64.diff.gz

-|   |   |   |-- rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz

-|   |   |   |-- rdist-6.1.5.tar.gz

-|   |   |   |-- rdist-eu-license.txt

-|   |   |   |-- rdist.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rfkill

-|   |   |   |-- rfkill-0.4.tar.bz2

-|   |   |   |-- rfkill.SlackBuild

-|   |   |   |-- rfkill.url

-|   |   |   `-- slack-desc

-|   |   |-- rp-pppoe

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- rp-pppoe-3.10.tar.gz

-|   |   |   |-- rp-pppoe.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rsync

-|   |   |   |-- rsync-3.0.8.tar.xz

-|   |   |   |-- rsync.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rt2860-firmware

-|   |   |   |-- RT2860_Firmware_V26.zip

-|   |   |   |-- rt2860-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rt2870-firmware

-|   |   |   |-- RT2870_Firmware_V22.zip

-|   |   |   |-- rt2870-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rt61-firmware

-|   |   |   |-- RT61_Firmware_V1.2.zip

-|   |   |   |-- rt61-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rt71w-firmware

-|   |   |   |-- RT71W_Firmware_V1.8.zip

-|   |   |   |-- rt71w-firmware.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- samba

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- prune-samba.sh

-|   |   |   |-- rc.samba

-|   |   |   |-- samba-3.5.8.tar.xz

-|   |   |   |-- samba.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- smb.conf.default

-|   |   |   |-- smb.conf.default.orig

-|   |   |   |-- smb.conf.diff.gz

-|   |   |   `-- talloc.pc

-|   |   |-- sendmail

-|   |   |   |-- Build.gz

-|   |   |   |-- SlackBuild

-|   |   |   |-- SlackBuild-sendmail

-|   |   |   |-- SlackBuild-sendmail-cf

-|   |   |   |-- _sendmail.tar.gz

-|   |   |   |-- linux.uucp.mc

-|   |   |   |-- sendmail-slackware-tls-sasl.mc

-|   |   |   |-- sendmail-slackware-tls.mc

-|   |   |   |-- sendmail-slackware.mc

-|   |   |   |-- sendmail.8.14.4.tar.gz

-|   |   |   |-- sendmail.8.14.4.tar.gz.sig

-|   |   |   |-- site.config.m4

-|   |   |   |-- slack-desc.sendmail

-|   |   |   `-- slack-desc.sendmail-cf

-|   |   |-- slrn

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- slrn-0.9.9p1.tar.bz2

-|   |   |   `-- slrn.SlackBuild

-|   |   |-- snownews

-|   |   |   |-- slack-desc

-|   |   |   |-- snownews-1.5.12.tar.gz

-|   |   |   |-- snownews-1.5.12.tar.gz.asc

-|   |   |   `-- snownews.SlackBuild

-|   |   |-- stunnel

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- generate-stunnel-key.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- stunnel-4.35.tar.gz

-|   |   |   |-- stunnel-4.35.tar.gz.asc

-|   |   |   `-- stunnel.SlackBuild

-|   |   |-- tcp_wrappers

-|   |   |   |-- slack-desc

-|   |   |   |-- tcp_wrappers.SlackBuild

-|   |   |   `-- tcp_wrappers_7.6.tar.gz

-|   |   |-- tcpdump

-|   |   |   |-- slack-desc

-|   |   |   |-- tcpdump-4.1.1.tar.gz

-|   |   |   |-- tcpdump-4.1.1.tar.gz.sig

-|   |   |   `-- tcpdump.SlackBuild

-|   |   |-- telnet

-|   |   |   |-- netkit-telnet-0.17-ayt.patch.gz

-|   |   |   |-- netkit-telnet-0.17.diff.gz

-|   |   |   |-- netkit-telnet-0.17.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- telnet-OpenBSD-014_telnet.diff.gz

-|   |   |   |-- telnet-OpenBSD-20020321.diff.gz

-|   |   |   |-- telnet-OpenBSD-20020321.tar.gz

-|   |   |   `-- telnet.SlackBuild

-|   |   |-- tftp-hpa

-|   |   |   |-- slack-desc

-|   |   |   |-- tftp-hpa-0.49.tar.bz2

-|   |   |   |-- tftp-hpa-0.49.tar.bz2.sign

-|   |   |   `-- tftp-hpa.SlackBuild

-|   |   |-- tin

-|   |   |   |-- slack-desc

-|   |   |   |-- tin-1.8.3.tar.bz2

-|   |   |   |-- tin-1.8.3.tar.bz2.sign

-|   |   |   `-- tin.SlackBuild

-|   |   |-- traceroute

-|   |   |   |-- slack-desc

-|   |   |   |-- traceroute-2.0.17.tar.gz

-|   |   |   `-- traceroute.SlackBuild

-|   |   |-- trn

-|   |   |   |-- _trn.tar.gz

-|   |   |   |-- config.sh.gz

-|   |   |   |-- config.x86_64.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- trn-3.6.tar.gz

-|   |   |   `-- trn.SlackBuild

-|   |   |-- uucp

-|   |   |   |-- _uucp.tar.gz

-|   |   |   |-- policy.h.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- uucp-1.07.tar.gz

-|   |   |   `-- uucp.SlackBuild

-|   |   |-- vlan

-|   |   |   |-- slack-desc

-|   |   |   |-- vlan.1.9.tar.bz2

-|   |   |   `-- vlan.SlackBuild

-|   |   |-- vsftpd

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- vsftpd-2.3.4.tar.gz

-|   |   |   |-- vsftpd.SlackBuild

-|   |   |   |-- vsftpd.builddefs.diff.gz

-|   |   |   |-- vsftpd.conf.diff.gz

-|   |   |   `-- vsftpd.log.gz

-|   |   |-- wget

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- wget-1.12.tar.xz

-|   |   |   `-- wget.SlackBuild

-|   |   |-- whois

-|   |   |   |-- slack-desc

-|   |   |   |-- whois.SlackBuild

-|   |   |   `-- whois_5.0.11.tar.gz

-|   |   |-- wireless-tools

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- scripts

-|   |   |   |   |-- rc.wireless

-|   |   |   |   `-- rc.wireless.conf

-|   |   |   |-- slack-desc

-|   |   |   |-- wireless_tools.29.tar.gz

-|   |   |   |-- wireless_tools.SlackBuild

-|   |   |   |-- wireless_tools.nowhine.diff.gz

-|   |   |   `-- wireless_tools.static.diff.gz

-|   |   |-- wpa_supplicant

-|   |   |   |-- README.slackware

-|   |   |   |-- fi.epitest.hostap.WPASupplicant.service

-|   |   |   |-- hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- wpa_gui.png

-|   |   |   |-- wpa_supplicant-0.7.3.tar.xz

-|   |   |   |-- wpa_supplicant.SlackBuild

-|   |   |   `-- wpa_supplicant.defconfig

-|   |   |-- yptools

-|   |   |   |-- nsswitch.conf-nis.gz

-|   |   |   |-- rc.yp.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- yp-tools-2.12.tar.bz2

-|   |   |   |-- yp-tools-2.12.tar.bz2.sign

-|   |   |   |-- ypbind-mt-1.32.tar.bz2

-|   |   |   |-- ypbind-mt-1.32.tar.sign

-|   |   |   |-- ypserv-2.24.tar.bz2

-|   |   |   |-- ypserv-2.24.tar.sign

-|   |   |   `-- yptools.SlackBuild

-|   |   |-- ytalk

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- ytalk-3.3.0.tar.bz2

-|   |   |   `-- ytalk.SlackBuild

-|   |   `-- zd1211-firmware

-|   |       |-- zd1211-firmware-1.4.tar.bz2

-|   |       `-- zd1211-firmware.SlackBuild

-|   |-- t

-|   |   |-- tetex

-|   |   |   |-- jadetex-3.13.tar.gz

-|   |   |   |-- jadetex.build

-|   |   |   |-- profile.d

-|   |   |   |   |-- tetex.csh

-|   |   |   |   `-- tetex.sh

-|   |   |   |-- slack-desc.tetex

-|   |   |   |-- slack-desc.tetex-doc

-|   |   |   |-- tetex-src-3.0.tar.xz

-|   |   |   |-- tetex-texmf-3.0.tar.xz

-|   |   |   |-- tetex-texmfsrc-3.0.tar.xz

-|   |   |   |-- tetex.CVE-2005-3193.diff.gz

-|   |   |   |-- tetex.SlackBuild

-|   |   |   |-- tetex.afm2tfm.getline.diff.gz

-|   |   |   |-- tetex.amstex.fmtutil.diff.gz

-|   |   |   |-- tetex.browsers.diff.gz

-|   |   |   |-- tetex.cpascal.getline.posix.2008.diff.gz

-|   |   |   |-- tetex.dvipdfm.mkstemp.diff.gz

-|   |   |   |-- tetex.etex.diff.gz

-|   |   |   |-- tetex.fontcachedirinhome.diff.gz

-|   |   |   |-- tetex.leet.diff.gz

-|   |   |   |-- tetex.png14.diff.gz

-|   |   |   |-- tetex.scripts.mktemp.diff.gz

-|   |   |   |-- tetex.tmp.cleanup.diff.gz

-|   |   |   `-- tetex.var.fonts.diff.gz

-|   |   |-- transfig

-|   |   |   |-- slack-desc

-|   |   |   |-- transfig.3.2.4-gcc4.patch.gz

-|   |   |   |-- transfig.3.2.4.tar.gz

-|   |   |   |-- transfig.SlackBuild

-|   |   |   |-- transfig.diff.gz

-|   |   |   `-- transfig.png14.nodither.diff.gz

-|   |   `-- xfig

-|   |       |-- slack-desc

-|   |       |-- xfig-3.2.4-mkstemp.diff.gz

-|   |       |-- xfig.3.2.3d-international-std-fonts.diff.gz

-|   |       |-- xfig.3.2.3d-xcolor.diff.gz

-|   |       |-- xfig.3.2.3d-xim.diff.gz

-|   |       |-- xfig.3.2.4-gcc4.diff.gz

-|   |       |-- xfig.3.2.4-locale.diff.gz

-|   |       |-- xfig.3.2.4-null.diff.gz

-|   |       |-- xfig.3.2.4-quiet.diff.gz

-|   |       |-- xfig.3.2.4-urw-fonts.diff.gz

-|   |       |-- xfig.3.2.4.diff.gz

-|   |       |-- xfig.3.2.4.full.tar.bz2

-|   |       |-- xfig.SlackBuild

-|   |       |-- xfig.docs.location.diff.gz

-|   |       |-- xfig.fig.ad.diff.gz

-|   |       |-- xfig.no.pdf.ref.diff.gz

-|   |       |-- xfig.no.xfig_ref_en.pdf.diff.gz

-|   |       `-- xfig.png14.nodither.diff.gz

-|   |-- tcl

-|   |   |-- expect

-|   |   |   |-- expect-5.44.1.15.tar.bz2

-|   |   |   |-- expect.SlackBuild

-|   |   |   |-- expect.exp_main_tk.c.version.require.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- hfsutils

-|   |   |   |-- hfsutils-3.2.6.tar.gz

-|   |   |   |-- hfsutils-3.2.6.tar.gz.sign

-|   |   |   |-- hfsutils.SlackBuild

-|   |   |   |-- hfsutils.errno.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- tcl

-|   |   |   |-- slack-desc

-|   |   |   |-- tcl.SlackBuild

-|   |   |   `-- tcl8.5.9-src.tar.xz

-|   |   |-- tclx

-|   |   |   |-- slack-desc

-|   |   |   |-- tclx-8.4.configure.diff.gz

-|   |   |   |-- tclx-8.4.gcc4.diff.gz

-|   |   |   |-- tclx.SlackBuild

-|   |   |   `-- tclx8.4.tar.bz2

-|   |   |-- tix

-|   |   |   |-- Tix8.4.3.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- tix.SlackBuild

-|   |   |   |-- tix.soname.patch.gz

-|   |   |   `-- tix.tcl8.5.patch.gz

-|   |   `-- tk

-|   |       |-- slack-desc

-|   |       |-- tk.SlackBuild

-|   |       `-- tk8.5.9-src.tar.xz

-|   |-- x

-|   |   |-- anthy

-|   |   |   |-- anthy-9100h.tar.xz

-|   |   |   |-- anthy.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- dejavu-fonts-ttf

-|   |   |   |-- dejavu-fonts-ttf-2.33.tar.xz

-|   |   |   |-- dejavu-fonts-ttf.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- fontconfig

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fontconfig-2.8.0.tar.xz

-|   |   |   |-- fontconfig.SlackBuild

-|   |   |   |-- fontconfig.dejavu.diff.gz

-|   |   |   |-- fontconfig.font.dir.list.diff.gz

-|   |   |   |-- setup.05.fontconfig

-|   |   |   `-- slack-desc

-|   |   |-- glew

-|   |   |   |-- glew-1.5.7.tar.xz

-|   |   |   |-- glew.SlackBuild

-|   |   |   |-- glew.url

-|   |   |   `-- slack-desc

-|   |   |-- libdrm

-|   |   |   |-- libdrm-2.4.23.tar.xz

-|   |   |   |-- libdrm.SlackBuild

-|   |   |   |-- libdrm.uint32_t.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- liberation-fonts-ttf

-|   |   |   |-- 60-liberation.conf

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- liberation-fonts-ttf-1.06.0.20100721.tar.xz

-|   |   |   |-- liberation-fonts-ttf.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- libhangul

-|   |   |   |-- libhangul-0.0.12.tar.xz

-|   |   |   |-- libhangul.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- m17n-lib

-|   |   |   |-- m17n-db-1.6.1.tar.xz

-|   |   |   |-- m17n-lib-1.6.1.tar.xz

-|   |   |   |-- m17n-lib.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mesa

-|   |   |   |-- MesaGLUT-7.9.2.tar.bz2

-|   |   |   |-- MesaLib-7.9.2.tar.bz2

-|   |   |   |-- README.GIT

-|   |   |   |-- get-mesa.sh

-|   |   |   |-- mesa-demos-8.0.1.tar.xz

-|   |   |   |-- mesa.SlackBuild

-|   |   |   |-- mesa.url

-|   |   |   |-- patches

-|   |   |   |   |-- i915_fragment_shader_disable.patch.gz

-|   |   |   |   `-- mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- radeon_ucode

-|   |   |   |-- radeon_ucode.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- ucode-20110302

-|   |   |       |-- BARTS_mc.bin

-|   |   |       |-- BARTS_me.bin

-|   |   |       |-- BARTS_pfp.bin

-|   |   |       |-- BTC_rlc.bin

-|   |   |       |-- CAICOS_mc.bin

-|   |   |       |-- CAICOS_me.bin

-|   |   |       |-- CAICOS_pfp.bin

-|   |   |       |-- CAYMAN_mc.bin

-|   |   |       |-- CAYMAN_me.bin

-|   |   |       |-- CAYMAN_pfp.bin

-|   |   |       |-- CAYMAN_rlc.bin

-|   |   |       |-- CEDAR_me.bin

-|   |   |       |-- CEDAR_pfp.bin

-|   |   |       |-- CEDAR_rlc.bin

-|   |   |       |-- CYPRESS_me.bin

-|   |   |       |-- CYPRESS_pfp.bin

-|   |   |       |-- CYPRESS_rlc.bin

-|   |   |       |-- JUNIPER_me.bin

-|   |   |       |-- JUNIPER_pfp.bin

-|   |   |       |-- JUNIPER_rlc.bin

-|   |   |       |-- LICENSE.radeon

-|   |   |       |-- PALM_me.bin

-|   |   |       |-- PALM_pfp.bin

-|   |   |       |-- R600_rlc.bin

-|   |   |       |-- R700_rlc.bin

-|   |   |       |-- REDWOOD_me.bin

-|   |   |       |-- REDWOOD_pfp.bin

-|   |   |       |-- REDWOOD_rlc.bin

-|   |   |       |-- SUMO_rlc.bin

-|   |   |       |-- TURKS_mc.bin

-|   |   |       |-- TURKS_me.bin

-|   |   |       `-- TURKS_pfp.bin

-|   |   |-- sazanami-fonts-ttf

-|   |   |   |-- sazanami-20040629.tar.bz2

-|   |   |   |-- sazanami-fonts-ttf.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- scim

-|   |   |   |-- scim-1.4.9-fix-ltdl.cpp.patch.gz

-|   |   |   |-- scim-1.4.9.tar.xz

-|   |   |   |-- scim-setup.desktop

-|   |   |   |-- scim.SlackBuild

-|   |   |   |-- scim.desktop

-|   |   |   `-- slack-desc

-|   |   |-- scim-anthy

-|   |   |   |-- scim-anthy-1.2.4.tar.gz

-|   |   |   |-- scim-anthy.SlackBuild

-|   |   |   |-- scim-anthy.gcc43.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- scim-bridge

-|   |   |   |-- patches

-|   |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch.gz

-|   |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-imcontext.cpp.patch.gz

-|   |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-imcontext.h.patch.gz

-|   |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent.cpp.patch.gz

-|   |   |   |   |-- scim-bridge-0.4.16-scim-bridge-client-imcontext-gtk.c.patch.gz

-|   |   |   |   `-- scim-bridge-0.4.16-scim-bridge-client-imcontext-qt.cpp.patch.gz

-|   |   |   |-- scim-bridge-0.4.16.tar.gz

-|   |   |   |-- scim-bridge.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- scim-hangul

-|   |   |   |-- scim-hangul-0.3.2.tar.gz

-|   |   |   |-- scim-hangul.SlackBuild

-|   |   |   |-- scim-hangul.gcc43.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- scim-input-pad

-|   |   |   |-- scim-input-pad-0.1.2.tar.bz2

-|   |   |   |-- scim-input-pad.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- scim-m17n

-|   |   |   |-- scim-m17n-0.2.3.tar.gz

-|   |   |   |-- scim-m17n.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- scim-pinyin

-|   |   |   |-- scim-pinyin-0.5.91.tar.gz

-|   |   |   |-- scim-pinyin.SlackBuild

-|   |   |   |-- scim-pinyin.gcc43.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- scim-tables

-|   |   |   |-- scim-tables-0.5.9.tar.gz

-|   |   |   |-- scim-tables.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- sinhala_lklug-font-ttf

-|   |   |   |-- sinhala_lklug-font-ttf.SlackBuild

-|   |   |   |-- sinhala_lklug.ttf

-|   |   |   `-- slack-desc

-|   |   |-- tibmachuni-font-ttf

-|   |   |   |-- TibetanMachineUnicodeFont.zip

-|   |   |   |-- slack-desc

-|   |   |   `-- tibmachuni-font-ttf.SlackBuild

-|   |   |-- ttf-indic-fonts

-|   |   |   |-- COPYING.bz2

-|   |   |   |-- Samyak_Malayalam.ttf.bz2

-|   |   |   |-- Samyak_Malayalam.url

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- ttf-indic-fonts-0.4.7.4.tar.bz2

-|   |   |   |-- ttf-indic-fonts.SlackBuild

-|   |   |   `-- ttf-indic-fonts.copyright.diff.gz

-|   |   |-- wqy-zenhei-font-ttf

-|   |   |   |-- slack-desc

-|   |   |   |-- wqy-zenhei-0.8.38-1.tar.bz2

-|   |   |   `-- wqy-zenhei-font-ttf.SlackBuild

-|   |   |-- x11

-|   |   |   |-- arch.use.flags

-|   |   |   |-- build

-|   |   |   |   |-- gccmakedep

-|   |   |   |   |-- libX11

-|   |   |   |   |-- xcompmgr

-|   |   |   |   |-- xf86-input-acecad

-|   |   |   |   |-- xf86-input-penmount

-|   |   |   |   |-- xf86-video-cirrus

-|   |   |   |   |-- xf86-video-i740

-|   |   |   |   |-- xf86-video-mach64

-|   |   |   |   |-- xf86-video-openchrome

-|   |   |   |   |-- xf86-video-r128

-|   |   |   |   |-- xf86-video-radeonhd

-|   |   |   |   |-- xf86-video-s3

-|   |   |   |   |-- xf86-video-s3virge

-|   |   |   |   |-- xf86-video-tdfx

-|   |   |   |   |-- xf86-video-tga

-|   |   |   |   |-- xf86-video-v4l

-|   |   |   |   `-- xf86-video-vesa

-|   |   |   |-- configure

-|   |   |   |   |-- compiz

-|   |   |   |   |-- configure

-|   |   |   |   |-- font-bh-ttf

-|   |   |   |   |-- font-util

-|   |   |   |   |-- gccmakedep

-|   |   |   |   |-- libX11

-|   |   |   |   |-- libXp

-|   |   |   |   |-- libXt

-|   |   |   |   |-- pixman

-|   |   |   |   |-- setxkbmap

-|   |   |   |   |-- xf86-input-vmmouse

-|   |   |   |   |-- xf86-video-ati

-|   |   |   |   |-- xf86-video-nouveau

-|   |   |   |   |-- xfs

-|   |   |   |   |-- xkbcomp

-|   |   |   |   |-- xkeyboard-config

-|   |   |   |   |-- xorg-docs

-|   |   |   |   `-- xorg-server

-|   |   |   |-- doinst.sh

-|   |   |   |   |-- font-adobe-100dpi

-|   |   |   |   |-- font-adobe-75dpi

-|   |   |   |   |-- font-adobe-utopia-100dpi

-|   |   |   |   |-- font-adobe-utopia-75dpi

-|   |   |   |   |-- font-adobe-utopia-type1

-|   |   |   |   |-- font-arabic-misc

-|   |   |   |   |-- font-bh-100dpi

-|   |   |   |   |-- font-bh-75dpi

-|   |   |   |   |-- font-bh-lucidatypewriter-100dpi

-|   |   |   |   |-- font-bh-lucidatypewriter-75dpi

-|   |   |   |   |-- font-bh-ttf

-|   |   |   |   |-- font-bh-type1

-|   |   |   |   |-- font-bitstream-100dpi

-|   |   |   |   |-- font-bitstream-75dpi

-|   |   |   |   |-- font-bitstream-speedo

-|   |   |   |   |-- font-bitstream-type1

-|   |   |   |   |-- font-cronyx-cyrillic

-|   |   |   |   |-- font-cursor-misc

-|   |   |   |   |-- font-daewoo-misc

-|   |   |   |   |-- font-dec-misc

-|   |   |   |   |-- font-ibm-type1

-|   |   |   |   |-- font-isas-misc

-|   |   |   |   |-- font-jis-misc

-|   |   |   |   |-- font-micro-misc

-|   |   |   |   |-- font-misc-cyrillic

-|   |   |   |   |-- font-misc-ethiopic

-|   |   |   |   |-- font-misc-meltho

-|   |   |   |   |-- font-misc-misc

-|   |   |   |   |-- font-mutt-misc

-|   |   |   |   |-- font-schumacher-misc

-|   |   |   |   |-- font-screen-cyrillic

-|   |   |   |   |-- font-sony-misc

-|   |   |   |   |-- font-sun-misc

-|   |   |   |   |-- font-winitzki-cyrillic

-|   |   |   |   |-- font-xfree86-type1

-|   |   |   |   |-- xdm

-|   |   |   |   |-- xfs

-|   |   |   |   |-- xinit

-|   |   |   |   |-- xkeyboard-config

-|   |   |   |   `-- xorg-cf-files

-|   |   |   |-- makepkg

-|   |   |   |   `-- xorg-server

-|   |   |   |-- modularize

-|   |   |   |-- noarch

-|   |   |   |-- package-blacklist

-|   |   |   |-- patch

-|   |   |   |   |-- README

-|   |   |   |   |-- xcompmgr

-|   |   |   |   |   `-- xcompmgr-follow-icccm-spec.diff.gz

-|   |   |   |   |-- xcompmgr.patch

-|   |   |   |   |-- xorg-server

-|   |   |   |   |   |-- x11.startwithblackscreen.diff.gz

-|   |   |   |   |   |-- xorg-server.fb.fbpict.c.mod.diff.gz

-|   |   |   |   |   `-- xorg-server.try_nouveau.diff.gz

-|   |   |   |   `-- xorg-server.patch

-|   |   |   |-- post-install

-|   |   |   |   |-- beforelight.post-install

-|   |   |   |   |-- encodings.post-install

-|   |   |   |   |-- font-adobe-100dpi.post-install

-|   |   |   |   |-- font-adobe-75dpi.post-install

-|   |   |   |   |-- font-adobe-utopia-100dpi.post-install

-|   |   |   |   |-- font-adobe-utopia-75dpi.post-install

-|   |   |   |   |-- font-adobe-utopia-type1.post-install

-|   |   |   |   |-- font-alias.post-install

-|   |   |   |   |-- font-arabic-misc.post-install

-|   |   |   |   |-- font-bh-100dpi.post-install

-|   |   |   |   |-- font-bh-75dpi.post-install

-|   |   |   |   |-- font-bh-lucidatypewriter-100dpi.post-install

-|   |   |   |   |-- font-bh-lucidatypewriter-75dpi.post-install

-|   |   |   |   |-- font-bh-ttf.post-install

-|   |   |   |   |-- font-bh-type1.post-install

-|   |   |   |   |-- font-bitstream-100dpi.post-install

-|   |   |   |   |-- font-bitstream-75dpi.post-install

-|   |   |   |   |-- font-bitstream-speedo.post-install

-|   |   |   |   |-- font-bitstream-type1.post-install

-|   |   |   |   |-- font-cronyx-cyrillic.post-install

-|   |   |   |   |-- font-cursor-misc.post-install

-|   |   |   |   |-- font-daewoo-misc.post-install

-|   |   |   |   |-- font-dec-misc.post-install

-|   |   |   |   |-- font-ibm-type1.post-install

-|   |   |   |   |-- font-isas-misc.post-install

-|   |   |   |   |-- font-jis-misc.post-install

-|   |   |   |   |-- font-micro-misc.post-install

-|   |   |   |   |-- font-misc-cyrillic.post-install

-|   |   |   |   |-- font-misc-ethiopic.post-install

-|   |   |   |   |-- font-misc-meltho.post-install

-|   |   |   |   |-- font-misc-misc.post-install

-|   |   |   |   |-- font-mutt-misc.post-install

-|   |   |   |   |-- font-schumacher-misc.post-install

-|   |   |   |   |-- font-screen-cyrillic.post-install

-|   |   |   |   |-- font-sony-misc.post-install

-|   |   |   |   |-- font-sun-misc.post-install

-|   |   |   |   |-- font-util.post-install

-|   |   |   |   |-- font-winitzki-cyrillic.post-install

-|   |   |   |   |-- font-xfree86-type1.post-install

-|   |   |   |   |-- lbxproxy.post-install

-|   |   |   |   |-- libSM.post-install

-|   |   |   |   |-- libX11

-|   |   |   |   |   `-- XKeysymDB.gz

-|   |   |   |   |-- libX11.post-install

-|   |   |   |   |-- libXaw.post-install

-|   |   |   |   |-- libpthread-stubs.post-install

-|   |   |   |   |-- libxcb.post-install

-|   |   |   |   |-- mkfontdir

-|   |   |   |   |   `-- setup.04.mkfontdir

-|   |   |   |   |-- mkfontdir.post-install

-|   |   |   |   |-- pixman.post-install

-|   |   |   |   |-- proxymngr.post-install

-|   |   |   |   |-- rstart.post-install

-|   |   |   |   |-- twm

-|   |   |   |   |   `-- xinitrc.twm

-|   |   |   |   |-- twm.post-install

-|   |   |   |   |-- util-macros.post-install

-|   |   |   |   |-- x11-app-test.post-install

-|   |   |   |   |-- x11-font.post-install

-|   |   |   |   |-- x11-util.post-install

-|   |   |   |   |-- xbitmaps.post-install

-|   |   |   |   |-- xcb-proto.post-install

-|   |   |   |   |-- xdm

-|   |   |   |   |   |-- Xsession

-|   |   |   |   |   |-- Xsession.orig

-|   |   |   |   |   |-- Xsetup_0

-|   |   |   |   |   `-- Xsetup_0.orig

-|   |   |   |   |-- xdm.post-install

-|   |   |   |   |-- xf86-input-joystick.post-install

-|   |   |   |   |-- xf86-input-synaptics

-|   |   |   |   |   `-- 50-synaptics.conf

-|   |   |   |   |-- xf86-input-synaptics.post-install

-|   |   |   |   |-- xfs.post-install

-|   |   |   |   |-- xinit

-|   |   |   |   |   `-- README.Xmodmap

-|   |   |   |   |-- xinit.post-install

-|   |   |   |   |-- xkeyboard-config.post-install

-|   |   |   |   |-- xorg-cf-files

-|   |   |   |   |   `-- x11.tmpl.lib64.kludge.diff.gz

-|   |   |   |   |-- xorg-cf-files.post-install

-|   |   |   |   |-- xorg-server.post-install

-|   |   |   |   |-- xorg-sgml-doctools.post-install

-|   |   |   |   |-- xproto.post-install

-|   |   |   |   `-- xsm.post-install

-|   |   |   |-- slack-desc

-|   |   |   |   |-- applewmproto

-|   |   |   |   |-- appres

-|   |   |   |   |-- bdftopcf

-|   |   |   |   |-- beforelight

-|   |   |   |   |-- bigreqsproto

-|   |   |   |   |-- bitmap

-|   |   |   |   |-- compiz

-|   |   |   |   |-- compositeproto

-|   |   |   |   |-- constype

-|   |   |   |   |-- damageproto

-|   |   |   |   |-- dmxproto

-|   |   |   |   |-- dri2proto

-|   |   |   |   |-- editres

-|   |   |   |   |-- encodings

-|   |   |   |   |-- evieext

-|   |   |   |   |-- fixesproto

-|   |   |   |   |-- font-adobe-100dpi

-|   |   |   |   |-- font-adobe-75dpi

-|   |   |   |   |-- font-adobe-utopia-100dpi

-|   |   |   |   |-- font-adobe-utopia-75dpi

-|   |   |   |   |-- font-adobe-utopia-type1

-|   |   |   |   |-- font-alias

-|   |   |   |   |-- font-arabic-misc

-|   |   |   |   |-- font-bh-100dpi

-|   |   |   |   |-- font-bh-75dpi

-|   |   |   |   |-- font-bh-lucidatypewriter-100dpi

-|   |   |   |   |-- font-bh-lucidatypewriter-75dpi

-|   |   |   |   |-- font-bh-ttf

-|   |   |   |   |-- font-bh-type1

-|   |   |   |   |-- font-bitstream-100dpi

-|   |   |   |   |-- font-bitstream-75dpi

-|   |   |   |   |-- font-bitstream-speedo

-|   |   |   |   |-- font-bitstream-type1

-|   |   |   |   |-- font-cronyx-cyrillic

-|   |   |   |   |-- font-cursor-misc

-|   |   |   |   |-- font-daewoo-misc

-|   |   |   |   |-- font-dec-misc

-|   |   |   |   |-- font-ibm-type1

-|   |   |   |   |-- font-isas-misc

-|   |   |   |   |-- font-jis-misc

-|   |   |   |   |-- font-micro-misc

-|   |   |   |   |-- font-misc-cyrillic

-|   |   |   |   |-- font-misc-ethiopic

-|   |   |   |   |-- font-misc-meltho

-|   |   |   |   |-- font-misc-misc

-|   |   |   |   |-- font-mutt-misc

-|   |   |   |   |-- font-schumacher-misc

-|   |   |   |   |-- font-screen-cyrillic

-|   |   |   |   |-- font-sony-misc

-|   |   |   |   |-- font-sun-misc

-|   |   |   |   |-- font-util

-|   |   |   |   |-- font-winitzki-cyrillic

-|   |   |   |   |-- font-xfree86-type1

-|   |   |   |   |-- fontcacheproto

-|   |   |   |   |-- fontsproto

-|   |   |   |   |-- fonttosfnt

-|   |   |   |   |-- fslsfonts

-|   |   |   |   |-- fstobdf

-|   |   |   |   |-- gccmakedep

-|   |   |   |   |-- glproto

-|   |   |   |   |-- iceauth

-|   |   |   |   |-- ico

-|   |   |   |   |-- imake

-|   |   |   |   |-- inputproto

-|   |   |   |   |-- intel-gpu-tools

-|   |   |   |   |-- kbproto

-|   |   |   |   |-- lbxproxy

-|   |   |   |   |-- libAppleWM

-|   |   |   |   |-- libFS

-|   |   |   |   |-- libICE

-|   |   |   |   |-- libSM

-|   |   |   |   |-- libWindowsWM

-|   |   |   |   |-- libX11

-|   |   |   |   |-- libXScrnSaver

-|   |   |   |   |-- libXTrap

-|   |   |   |   |-- libXau

-|   |   |   |   |-- libXaw

-|   |   |   |   |-- libXcomposite

-|   |   |   |   |-- libXcursor

-|   |   |   |   |-- libXdamage

-|   |   |   |   |-- libXdmcp

-|   |   |   |   |-- libXevie

-|   |   |   |   |-- libXext

-|   |   |   |   |-- libXfixes

-|   |   |   |   |-- libXfont

-|   |   |   |   |-- libXfontcache

-|   |   |   |   |-- libXft

-|   |   |   |   |-- libXi

-|   |   |   |   |-- libXinerama

-|   |   |   |   |-- libXmu

-|   |   |   |   |-- libXp

-|   |   |   |   |-- libXpm

-|   |   |   |   |-- libXprintAppUtil

-|   |   |   |   |-- libXprintUtil

-|   |   |   |   |-- libXrandr

-|   |   |   |   |-- libXrender

-|   |   |   |   |-- libXres

-|   |   |   |   |-- libXt

-|   |   |   |   |-- libXtst

-|   |   |   |   |-- libXv

-|   |   |   |   |-- libXvMC

-|   |   |   |   |-- libXxf86dga

-|   |   |   |   |-- libXxf86misc

-|   |   |   |   |-- libXxf86vm

-|   |   |   |   |-- libdmx

-|   |   |   |   |-- libfontenc

-|   |   |   |   |-- liblbxutil

-|   |   |   |   |-- liboldX

-|   |   |   |   |-- libpciaccess

-|   |   |   |   |-- libpthread-stubs

-|   |   |   |   |-- libxcb

-|   |   |   |   |-- libxkbfile

-|   |   |   |   |-- libxkbui

-|   |   |   |   |-- listres

-|   |   |   |   |-- lndir

-|   |   |   |   |-- luit

-|   |   |   |   |-- makedepend

-|   |   |   |   |-- mkcomposecache

-|   |   |   |   |-- mkfontdir

-|   |   |   |   |-- mkfontscale

-|   |   |   |   |-- oclock

-|   |   |   |   |-- pixman

-|   |   |   |   |-- printproto

-|   |   |   |   |-- proxymngr

-|   |   |   |   |-- randrproto

-|   |   |   |   |-- recordproto

-|   |   |   |   |-- rendercheck

-|   |   |   |   |-- renderproto

-|   |   |   |   |-- resourceproto

-|   |   |   |   |-- rgb

-|   |   |   |   |-- rstart

-|   |   |   |   |-- scripts

-|   |   |   |   |-- scrnsaverproto

-|   |   |   |   |-- sessreg

-|   |   |   |   |-- setxkbmap

-|   |   |   |   |-- showfont

-|   |   |   |   |-- smproxy

-|   |   |   |   |-- trapproto

-|   |   |   |   |-- twm

-|   |   |   |   |-- util-macros

-|   |   |   |   |-- videoproto

-|   |   |   |   |-- viewres

-|   |   |   |   |-- windowswmproto

-|   |   |   |   |-- x11-app

-|   |   |   |   |-- x11-data

-|   |   |   |   |-- x11-doc

-|   |   |   |   |-- x11-driver

-|   |   |   |   |-- x11-font

-|   |   |   |   |-- x11-lib

-|   |   |   |   |-- x11-proto

-|   |   |   |   |-- x11-util

-|   |   |   |   |-- x11perf

-|   |   |   |   |-- xauth

-|   |   |   |   |-- xbacklight

-|   |   |   |   |-- xbiff

-|   |   |   |   |-- xbitmaps

-|   |   |   |   |-- xcalc

-|   |   |   |   |-- xcb-proto

-|   |   |   |   |-- xcb-util

-|   |   |   |   |-- xclipboard

-|   |   |   |   |-- xclock

-|   |   |   |   |-- xcmiscproto

-|   |   |   |   |-- xcmsdb

-|   |   |   |   |-- xcompmgr

-|   |   |   |   |-- xconsole

-|   |   |   |   |-- xcursor-themes

-|   |   |   |   |-- xcursorgen

-|   |   |   |   |-- xdbedizzy

-|   |   |   |   |-- xditview

-|   |   |   |   |-- xdm

-|   |   |   |   |-- xdpyinfo

-|   |   |   |   |-- xdriinfo

-|   |   |   |   |-- xedit

-|   |   |   |   |-- xev

-|   |   |   |   |-- xextproto

-|   |   |   |   |-- xeyes

-|   |   |   |   |-- xf86-input-acecad

-|   |   |   |   |-- xf86-input-aiptek

-|   |   |   |   |-- xf86-input-calcomp

-|   |   |   |   |-- xf86-input-citron

-|   |   |   |   |-- xf86-input-digitaledge

-|   |   |   |   |-- xf86-input-dmc

-|   |   |   |   |-- xf86-input-dynapro

-|   |   |   |   |-- xf86-input-elo2300

-|   |   |   |   |-- xf86-input-elographics

-|   |   |   |   |-- xf86-input-evdev

-|   |   |   |   |-- xf86-input-fpit

-|   |   |   |   |-- xf86-input-hyperpen

-|   |   |   |   |-- xf86-input-jamstudio

-|   |   |   |   |-- xf86-input-joystick

-|   |   |   |   |-- xf86-input-keyboard

-|   |   |   |   |-- xf86-input-magellan

-|   |   |   |   |-- xf86-input-magictouch

-|   |   |   |   |-- xf86-input-microtouch

-|   |   |   |   |-- xf86-input-mouse

-|   |   |   |   |-- xf86-input-mutouch

-|   |   |   |   |-- xf86-input-palmax

-|   |   |   |   |-- xf86-input-penmount

-|   |   |   |   |-- xf86-input-spaceorb

-|   |   |   |   |-- xf86-input-summa

-|   |   |   |   |-- xf86-input-synaptics

-|   |   |   |   |-- xf86-input-tek4957

-|   |   |   |   |-- xf86-input-ur98

-|   |   |   |   |-- xf86-input-vmmouse

-|   |   |   |   |-- xf86-input-void

-|   |   |   |   |-- xf86-input-wacom

-|   |   |   |   |-- xf86-video-apm

-|   |   |   |   |-- xf86-video-ark

-|   |   |   |   |-- xf86-video-ast

-|   |   |   |   |-- xf86-video-ati

-|   |   |   |   |-- xf86-video-chips

-|   |   |   |   |-- xf86-video-cirrus

-|   |   |   |   |-- xf86-video-cyrix

-|   |   |   |   |-- xf86-video-dummy

-|   |   |   |   |-- xf86-video-fbdev

-|   |   |   |   |-- xf86-video-geode

-|   |   |   |   |-- xf86-video-glint

-|   |   |   |   |-- xf86-video-i128

-|   |   |   |   |-- xf86-video-i740

-|   |   |   |   |-- xf86-video-i810

-|   |   |   |   |-- xf86-video-impact

-|   |   |   |   |-- xf86-video-imstt

-|   |   |   |   |-- xf86-video-intel

-|   |   |   |   |-- xf86-video-mach64

-|   |   |   |   |-- xf86-video-mga

-|   |   |   |   |-- xf86-video-neomagic

-|   |   |   |   |-- xf86-video-newport

-|   |   |   |   |-- xf86-video-nouveau

-|   |   |   |   |-- xf86-video-nsc

-|   |   |   |   |-- xf86-video-nv

-|   |   |   |   |-- xf86-video-openchrome

-|   |   |   |   |-- xf86-video-r128

-|   |   |   |   |-- xf86-video-radeonhd

-|   |   |   |   |-- xf86-video-rendition

-|   |   |   |   |-- xf86-video-s3

-|   |   |   |   |-- xf86-video-s3virge

-|   |   |   |   |-- xf86-video-savage

-|   |   |   |   |-- xf86-video-siliconmotion

-|   |   |   |   |-- xf86-video-sis

-|   |   |   |   |-- xf86-video-sisusb

-|   |   |   |   |-- xf86-video-sunbw2

-|   |   |   |   |-- xf86-video-suncg14

-|   |   |   |   |-- xf86-video-suncg3

-|   |   |   |   |-- xf86-video-suncg6

-|   |   |   |   |-- xf86-video-sunffb

-|   |   |   |   |-- xf86-video-sunleo

-|   |   |   |   |-- xf86-video-suntcx

-|   |   |   |   |-- xf86-video-tdfx

-|   |   |   |   |-- xf86-video-tga

-|   |   |   |   |-- xf86-video-trident

-|   |   |   |   |-- xf86-video-tseng

-|   |   |   |   |-- xf86-video-v4l

-|   |   |   |   |-- xf86-video-vermilion

-|   |   |   |   |-- xf86-video-vesa

-|   |   |   |   |-- xf86-video-vga

-|   |   |   |   |-- xf86-video-via

-|   |   |   |   |-- xf86-video-vmware

-|   |   |   |   |-- xf86-video-voodoo

-|   |   |   |   |-- xf86-video-wsfb

-|   |   |   |   |-- xf86-video-xgi

-|   |   |   |   |-- xf86-video-xgixp

-|   |   |   |   |-- xf86bigfontproto

-|   |   |   |   |-- xf86dga

-|   |   |   |   |-- xf86dgaproto

-|   |   |   |   |-- xf86driproto

-|   |   |   |   |-- xf86miscproto

-|   |   |   |   |-- xf86rushproto

-|   |   |   |   |-- xf86vidmodeproto

-|   |   |   |   |-- xfd

-|   |   |   |   |-- xfindproxy

-|   |   |   |   |-- xfontsel

-|   |   |   |   |-- xfs

-|   |   |   |   |-- xfsinfo

-|   |   |   |   |-- xfwp

-|   |   |   |   |-- xgamma

-|   |   |   |   |-- xgc

-|   |   |   |   |-- xhost

-|   |   |   |   |-- xineramaproto

-|   |   |   |   |-- xinit

-|   |   |   |   |-- xinput

-|   |   |   |   |-- xkbcomp

-|   |   |   |   |-- xkbdata

-|   |   |   |   |-- xkbevd

-|   |   |   |   |-- xkbprint

-|   |   |   |   |-- xkbutils

-|   |   |   |   |-- xkeyboard-config

-|   |   |   |   |-- xkill

-|   |   |   |   |-- xload

-|   |   |   |   |-- xlogo

-|   |   |   |   |-- xlsatoms

-|   |   |   |   |-- xlsclients

-|   |   |   |   |-- xlsfonts

-|   |   |   |   |-- xmag

-|   |   |   |   |-- xman

-|   |   |   |   |-- xmessage

-|   |   |   |   |-- xmh

-|   |   |   |   |-- xmodmap

-|   |   |   |   |-- xmore

-|   |   |   |   |-- xorg-cf-files

-|   |   |   |   |-- xorg-docs

-|   |   |   |   |-- xorg-server

-|   |   |   |   |-- xorg-server-xdmx

-|   |   |   |   |-- xorg-server-xephyr

-|   |   |   |   |-- xorg-server-xnest

-|   |   |   |   |-- xorg-server-xvfb

-|   |   |   |   |-- xorg-sgml-doctools

-|   |   |   |   |-- xphelloworld

-|   |   |   |   |-- xplsprinters

-|   |   |   |   |-- xpr

-|   |   |   |   |-- xprehashprinterlist

-|   |   |   |   |-- xprop

-|   |   |   |   |-- xproto

-|   |   |   |   |-- xproxymanagementprotocol

-|   |   |   |   |-- xpyb

-|   |   |   |   |-- xrandr

-|   |   |   |   |-- xrdb

-|   |   |   |   |-- xrefresh

-|   |   |   |   |-- xrx

-|   |   |   |   |-- xscope

-|   |   |   |   |-- xset

-|   |   |   |   |-- xsetmode

-|   |   |   |   |-- xsetpointer

-|   |   |   |   |-- xsetroot

-|   |   |   |   |-- xsm

-|   |   |   |   |-- xstdcmap

-|   |   |   |   |-- xtrans

-|   |   |   |   |-- xtrap

-|   |   |   |   |-- xvidtune

-|   |   |   |   |-- xvinfo

-|   |   |   |   |-- xwd

-|   |   |   |   |-- xwininfo

-|   |   |   |   `-- xwud

-|   |   |   |-- src

-|   |   |   |   |-- app

-|   |   |   |   |   |-- appres-1.0.3.tar.xz

-|   |   |   |   |   |-- bdftopcf-1.0.3.tar.xz

-|   |   |   |   |   |-- beforelight-1.0.4.tar.xz

-|   |   |   |   |   |-- bitmap-1.0.5.tar.xz

-|   |   |   |   |   |-- compiz-0.8.8.tar.xz

-|   |   |   |   |   |-- editres-1.0.5.tar.xz

-|   |   |   |   |   |-- fonttosfnt-1.0.4.tar.xz

-|   |   |   |   |   |-- fslsfonts-1.0.3.tar.xz

-|   |   |   |   |   |-- fstobdf-1.0.4.tar.xz

-|   |   |   |   |   |-- iceauth-1.0.4.tar.xz

-|   |   |   |   |   |-- ico-1.0.3.tar.xz

-|   |   |   |   |   |-- intel-gpu-tools-1.0.2.tar.xz

-|   |   |   |   |   |-- listres-1.0.2.tar.xz

-|   |   |   |   |   |-- luit-1.1.0.tar.xz

-|   |   |   |   |   |-- mkcomposecache-1.2.1.tar.xz

-|   |   |   |   |   |-- mkfontdir-1.0.6.tar.xz

-|   |   |   |   |   |-- mkfontscale-1.0.8.tar.xz

-|   |   |   |   |   |-- oclock-1.0.2.tar.xz

-|   |   |   |   |   |-- rendercheck-1.4.tar.xz

-|   |   |   |   |   |-- rgb-1.0.4.tar.xz

-|   |   |   |   |   |-- sessreg-1.0.6.tar.xz

-|   |   |   |   |   |-- setxkbmap-1.2.0.tar.xz

-|   |   |   |   |   |-- showfont-1.0.3.tar.xz

-|   |   |   |   |   |-- smproxy-1.0.4.tar.xz

-|   |   |   |   |   |-- twm-1.0.6.tar.xz

-|   |   |   |   |   |-- viewres-1.0.3.tar.xz

-|   |   |   |   |   |-- x11perf-1.5.3.tar.xz

-|   |   |   |   |   |-- xauth-1.0.5.tar.xz

-|   |   |   |   |   |-- xbacklight-1.1.2.tar.xz

-|   |   |   |   |   |-- xbiff-1.0.3.tar.xz

-|   |   |   |   |   |-- xcalc-1.0.4.1.tar.xz

-|   |   |   |   |   |-- xclipboard-1.1.1.tar.xz

-|   |   |   |   |   |-- xclock-1.0.5.tar.xz

-|   |   |   |   |   |-- xcmsdb-1.0.3.tar.xz

-|   |   |   |   |   |-- xcompmgr-1.1.5.tar.xz

-|   |   |   |   |   |-- xconsole-1.0.4.tar.xz

-|   |   |   |   |   |-- xcursorgen-1.0.4.tar.xz

-|   |   |   |   |   |-- xdbedizzy-1.1.0.tar.xz

-|   |   |   |   |   |-- xditview-1.0.2.tar.xz

-|   |   |   |   |   |-- xdm-1.1.10.tar.xz

-|   |   |   |   |   |-- xdpyinfo-1.2.0.tar.xz

-|   |   |   |   |   |-- xdriinfo-1.0.4.tar.xz

-|   |   |   |   |   |-- xedit-1.2.0.tar.xz

-|   |   |   |   |   |-- xev-1.1.0.tar.xz

-|   |   |   |   |   |-- xeyes-1.1.1.tar.xz

-|   |   |   |   |   |-- xf86dga-1.0.3.tar.xz

-|   |   |   |   |   |-- xfd-1.1.0.tar.xz

-|   |   |   |   |   |-- xfontsel-1.0.3.tar.xz

-|   |   |   |   |   |-- xfs-1.1.1.tar.xz

-|   |   |   |   |   |-- xfsinfo-1.0.3.tar.xz

-|   |   |   |   |   |-- xgamma-1.0.4.tar.xz

-|   |   |   |   |   |-- xgc-1.0.3.tar.xz

-|   |   |   |   |   |-- xhost-1.0.4.tar.xz

-|   |   |   |   |   |-- xinit-1.3.0.tar.xz

-|   |   |   |   |   |-- xinput-1.5.3.tar.xz

-|   |   |   |   |   |-- xkbcomp-1.2.1.tar.xz

-|   |   |   |   |   |-- xkbevd-1.1.2.tar.xz

-|   |   |   |   |   |-- xkbprint-1.0.3.tar.xz

-|   |   |   |   |   |-- xkbutils-1.0.3.tar.xz

-|   |   |   |   |   |-- xkill-1.0.3.tar.xz

-|   |   |   |   |   |-- xload-1.1.0.tar.xz

-|   |   |   |   |   |-- xlogo-1.0.3.tar.xz

-|   |   |   |   |   |-- xlsatoms-1.1.0.tar.xz

-|   |   |   |   |   |-- xlsclients-1.1.1.tar.xz

-|   |   |   |   |   |-- xlsfonts-1.0.3.tar.xz

-|   |   |   |   |   |-- xmag-1.0.4.tar.xz

-|   |   |   |   |   |-- xman-1.1.1.tar.xz

-|   |   |   |   |   |-- xmessage-1.0.3.tar.xz

-|   |   |   |   |   |-- xmh-1.0.2.tar.xz

-|   |   |   |   |   |-- xmodmap-1.0.5.tar.xz

-|   |   |   |   |   |-- xmore-1.0.2.tar.xz

-|   |   |   |   |   |-- xphelloworld-1.0.1.tar.xz

-|   |   |   |   |   |-- xpr-1.0.3.tar.xz

-|   |   |   |   |   |-- xprop-1.2.0.tar.xz

-|   |   |   |   |   |-- xrandr-1.3.4.tar.xz

-|   |   |   |   |   |-- xrdb-1.0.9.tar.xz

-|   |   |   |   |   |-- xrefresh-1.0.4.tar.xz

-|   |   |   |   |   |-- xscope-1.3.tar.xz

-|   |   |   |   |   |-- xset-1.2.1.tar.xz

-|   |   |   |   |   |-- xsetroot-1.1.0.tar.xz

-|   |   |   |   |   |-- xsm-1.0.2.tar.xz

-|   |   |   |   |   |-- xstdcmap-1.0.2.tar.xz

-|   |   |   |   |   |-- xvidtune-1.0.2.tar.xz

-|   |   |   |   |   |-- xvinfo-1.1.1.tar.xz

-|   |   |   |   |   |-- xwd-1.0.4.tar.xz

-|   |   |   |   |   |-- xwininfo-1.1.1.tar.xz

-|   |   |   |   |   `-- xwud-1.0.3.tar.xz

-|   |   |   |   |-- data

-|   |   |   |   |   |-- xbitmaps-1.1.1.tar.xz

-|   |   |   |   |   |-- xcursor-themes-1.0.3.tar.xz

-|   |   |   |   |   `-- xkeyboard-config-2.2.1.tar.xz

-|   |   |   |   |-- doc

-|   |   |   |   |   |-- xorg-docs-1.6.tar.xz

-|   |   |   |   |   `-- xorg-sgml-doctools-1.7.tar.xz

-|   |   |   |   |-- driver

-|   |   |   |   |   |-- xf86-input-acecad-1.4.0.tar.xz

-|   |   |   |   |   |-- xf86-input-aiptek-1.3.1.tar.xz

-|   |   |   |   |   |-- xf86-input-evdev-2.6.0.tar.xz

-|   |   |   |   |   |-- xf86-input-joystick-1.5.0.tar.xz

-|   |   |   |   |   |-- xf86-input-keyboard-1.6.0.tar.xz

-|   |   |   |   |   |-- xf86-input-mouse-1.7.0.tar.xz

-|   |   |   |   |   |-- xf86-input-penmount-1.4.1.tar.xz

-|   |   |   |   |   |-- xf86-input-synaptics-1.4.0.tar.xz

-|   |   |   |   |   |-- xf86-input-vmmouse-12.7.0.tar.xz

-|   |   |   |   |   |-- xf86-input-void-1.3.1.tar.xz

-|   |   |   |   |   |-- xf86-input-wacom-0.10.11.tar.xz

-|   |   |   |   |   |-- xf86-video-apm-1.2.3.tar.xz

-|   |   |   |   |   |-- xf86-video-ark-0.7.3.tar.xz

-|   |   |   |   |   |-- xf86-video-ast-0.91.10.tar.xz

-|   |   |   |   |   |-- xf86-video-ati-6.14.1.tar.xz

-|   |   |   |   |   |-- xf86-video-chips-1.2.4.tar.xz

-|   |   |   |   |   |-- xf86-video-cirrus-1.3.2.tar.xz

-|   |   |   |   |   |-- xf86-video-dummy-0.3.4.tar.xz

-|   |   |   |   |   |-- xf86-video-geode-2.11.10.tar.xz

-|   |   |   |   |   |-- xf86-video-glint-1.2.5.tar.xz

-|   |   |   |   |   |-- xf86-video-i128-1.3.4.tar.xz

-|   |   |   |   |   |-- xf86-video-i740-1.3.2.tar.xz

-|   |   |   |   |   |-- xf86-video-intel-2.15.0.tar.xz

-|   |   |   |   |   |-- xf86-video-mach64-6.8.2.tar.xz

-|   |   |   |   |   |-- xf86-video-mga-1.4.13.tar.xz

-|   |   |   |   |   |-- xf86-video-neomagic-1.2.5.tar.xz

-|   |   |   |   |   |-- xf86-video-nouveau-8bb82312.tar.xz

-|   |   |   |   |   |-- xf86-video-nv-2.1.18.tar.xz

-|   |   |   |   |   |-- xf86-video-openchrome-0.2.904.tar.xz

-|   |   |   |   |   |-- xf86-video-r128-6.8.1.tar.xz

-|   |   |   |   |   |-- xf86-video-radeonhd-1.3.0.tar.xz

-|   |   |   |   |   |-- xf86-video-rendition-4.2.4.tar.xz

-|   |   |   |   |   |-- xf86-video-s3-0.6.3.tar.xz

-|   |   |   |   |   |-- xf86-video-s3virge-1.10.4.tar.xz

-|   |   |   |   |   |-- xf86-video-savage-2.3.2.tar.xz

-|   |   |   |   |   |-- xf86-video-siliconmotion-1.7.5.tar.xz

-|   |   |   |   |   |-- xf86-video-sis-0.10.3.tar.xz

-|   |   |   |   |   |-- xf86-video-sisusb-0.9.4.tar.xz

-|   |   |   |   |   |-- xf86-video-tdfx-1.4.3.tar.xz

-|   |   |   |   |   |-- xf86-video-tga-1.2.1.tar.xz

-|   |   |   |   |   |-- xf86-video-trident-1.3.4.tar.xz

-|   |   |   |   |   |-- xf86-video-tseng-1.2.4.tar.xz

-|   |   |   |   |   |-- xf86-video-v4l-0.2.0.tar.xz

-|   |   |   |   |   |-- xf86-video-vesa-2.3.0.tar.xz

-|   |   |   |   |   |-- xf86-video-vmware-11.0.3.tar.xz

-|   |   |   |   |   |-- xf86-video-voodoo-1.2.4.tar.xz

-|   |   |   |   |   `-- xf86-video-xgi-1.6.0.tar.xz

-|   |   |   |   |-- font

-|   |   |   |   |   |-- encodings-1.0.4.tar.xz

-|   |   |   |   |   |-- font-adobe-100dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-adobe-75dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-adobe-utopia-100dpi-1.0.4.tar.xz

-|   |   |   |   |   |-- font-adobe-utopia-75dpi-1.0.4.tar.xz

-|   |   |   |   |   |-- font-adobe-utopia-type1-1.0.4.tar.xz

-|   |   |   |   |   |-- font-alias-1.0.3.tar.xz

-|   |   |   |   |   |-- font-arabic-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-100dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-75dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-lucidatypewriter-100dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-lucidatypewriter-75dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-ttf-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bh-type1-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bitstream-100dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bitstream-75dpi-1.0.3.tar.xz

-|   |   |   |   |   |-- font-bitstream-speedo-1.0.2.tar.xz

-|   |   |   |   |   |-- font-bitstream-type1-1.0.3.tar.xz

-|   |   |   |   |   |-- font-cronyx-cyrillic-1.0.3.tar.xz

-|   |   |   |   |   |-- font-cursor-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-daewoo-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-dec-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-ibm-type1-1.0.3.tar.xz

-|   |   |   |   |   |-- font-isas-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-jis-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-micro-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-misc-cyrillic-1.0.3.tar.xz

-|   |   |   |   |   |-- font-misc-ethiopic-1.0.3.tar.xz

-|   |   |   |   |   |-- font-misc-meltho-1.0.3.tar.xz

-|   |   |   |   |   |-- font-misc-misc-1.1.2.tar.xz

-|   |   |   |   |   |-- font-mutt-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-schumacher-misc-1.1.2.tar.xz

-|   |   |   |   |   |-- font-screen-cyrillic-1.0.4.tar.xz

-|   |   |   |   |   |-- font-sony-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-sun-misc-1.0.3.tar.xz

-|   |   |   |   |   |-- font-util-1.2.0.tar.xz

-|   |   |   |   |   |-- font-winitzki-cyrillic-1.0.3.tar.xz

-|   |   |   |   |   `-- font-xfree86-type1-1.0.4.tar.xz

-|   |   |   |   |-- get-xf86-video-nouveau.sh

-|   |   |   |   |-- lib

-|   |   |   |   |   |-- libFS-1.0.3.tar.xz

-|   |   |   |   |   |-- libICE-1.0.7.tar.xz

-|   |   |   |   |   |-- libSM-1.2.0.tar.xz

-|   |   |   |   |   |-- libX11-1.4.3.tar.xz

-|   |   |   |   |   |-- libXScrnSaver-1.2.1.tar.xz

-|   |   |   |   |   |-- libXau-1.0.6.tar.xz

-|   |   |   |   |   |-- libXaw-1.0.9.tar.xz

-|   |   |   |   |   |-- libXcomposite-0.4.3.tar.xz

-|   |   |   |   |   |-- libXcursor-1.1.11.tar.xz

-|   |   |   |   |   |-- libXdamage-1.1.3.tar.xz

-|   |   |   |   |   |-- libXdmcp-1.1.0.tar.xz

-|   |   |   |   |   |-- libXevie-1.0.3.tar.xz

-|   |   |   |   |   |-- libXext-1.2.0.tar.xz

-|   |   |   |   |   |-- libXfixes-5.0.tar.xz

-|   |   |   |   |   |-- libXfont-1.4.3.tar.xz

-|   |   |   |   |   |-- libXfontcache-1.0.5.tar.xz

-|   |   |   |   |   |-- libXft-2.2.0.tar.xz

-|   |   |   |   |   |-- libXi-1.4.2.tar.xz

-|   |   |   |   |   |-- libXinerama-1.1.1.tar.xz

-|   |   |   |   |   |-- libXmu-1.1.0.tar.xz

-|   |   |   |   |   |-- libXp-1.0.1.tar.xz

-|   |   |   |   |   |-- libXpm-3.5.9.tar.xz

-|   |   |   |   |   |-- libXrandr-1.3.1.tar.xz

-|   |   |   |   |   |-- libXrender-0.9.6.tar.xz

-|   |   |   |   |   |-- libXres-1.0.5.tar.xz

-|   |   |   |   |   |-- libXt-1.1.1.tar.xz

-|   |   |   |   |   |-- libXtst-1.2.0.tar.xz

-|   |   |   |   |   |-- libXv-1.0.6.tar.xz

-|   |   |   |   |   |-- libXvMC-1.0.6.tar.xz

-|   |   |   |   |   |-- libXxf86dga-1.1.2.tar.xz

-|   |   |   |   |   |-- libXxf86misc-1.0.3.tar.xz

-|   |   |   |   |   |-- libXxf86vm-1.1.1.tar.xz

-|   |   |   |   |   |-- libdmx-1.1.1.tar.xz

-|   |   |   |   |   |-- libfontenc-1.1.0.tar.xz

-|   |   |   |   |   |-- libpciaccess-0.12.1.tar.xz

-|   |   |   |   |   |-- libxkbfile-1.0.7.tar.xz

-|   |   |   |   |   |-- pixman-0.20.2.tar.xz

-|   |   |   |   |   `-- xtrans-1.2.6.tar.xz

-|   |   |   |   |-- proto

-|   |   |   |   |   |-- bigreqsproto-1.1.1.tar.xz

-|   |   |   |   |   |-- compositeproto-0.4.2.tar.xz

-|   |   |   |   |   |-- damageproto-1.2.1.tar.xz

-|   |   |   |   |   |-- dmxproto-2.3.1.tar.xz

-|   |   |   |   |   |-- dri2proto-2.3.tar.xz

-|   |   |   |   |   |-- evieext-1.1.1.tar.xz

-|   |   |   |   |   |-- fixesproto-5.0.tar.xz

-|   |   |   |   |   |-- fontcacheproto-0.1.3.tar.xz

-|   |   |   |   |   |-- fontsproto-2.1.1.tar.xz

-|   |   |   |   |   |-- glproto-1.4.12.tar.xz

-|   |   |   |   |   |-- inputproto-2.0.1.tar.xz

-|   |   |   |   |   |-- kbproto-1.0.5.tar.xz

-|   |   |   |   |   |-- printproto-1.0.5.tar.xz

-|   |   |   |   |   |-- randrproto-1.3.2.tar.xz

-|   |   |   |   |   |-- recordproto-1.14.1.tar.xz

-|   |   |   |   |   |-- renderproto-0.11.1.tar.xz

-|   |   |   |   |   |-- resourceproto-1.1.1.tar.xz

-|   |   |   |   |   |-- scrnsaverproto-1.2.1.tar.xz

-|   |   |   |   |   |-- videoproto-2.3.1.tar.xz

-|   |   |   |   |   |-- xcmiscproto-1.2.1.tar.xz

-|   |   |   |   |   |-- xextproto-7.2.0.tar.xz

-|   |   |   |   |   |-- xf86bigfontproto-1.2.0.tar.xz

-|   |   |   |   |   |-- xf86dgaproto-2.1.tar.xz

-|   |   |   |   |   |-- xf86driproto-2.1.1.tar.xz

-|   |   |   |   |   |-- xf86miscproto-0.9.3.tar.xz

-|   |   |   |   |   |-- xf86vidmodeproto-2.3.1.tar.xz

-|   |   |   |   |   |-- xineramaproto-1.2.1.tar.xz

-|   |   |   |   |   `-- xproto-7.0.21.tar.xz

-|   |   |   |   |-- util

-|   |   |   |   |   |-- gccmakedep-1.0.2.tar.xz

-|   |   |   |   |   |-- imake-1.0.4.tar.xz

-|   |   |   |   |   |-- lndir-1.0.2.tar.xz

-|   |   |   |   |   |-- makedepend-1.0.3.tar.xz

-|   |   |   |   |   |-- util-macros-1.13.0.tar.xz

-|   |   |   |   |   `-- xorg-cf-files-1.0.4.tar.xz

-|   |   |   |   |-- xcb

-|   |   |   |   |   |-- libpthread-stubs-0.3.tar.xz

-|   |   |   |   |   |-- libxcb-1.7.tar.xz

-|   |   |   |   |   |-- xcb-proto-1.6.tar.xz

-|   |   |   |   |   |-- xcb-util-0.3.6.tar.xz

-|   |   |   |   |   `-- xpyb-1.2.tar.xz

-|   |   |   |   `-- xserver

-|   |   |   |       `-- xorg-server-1.9.5.tar.xz

-|   |   |   `-- x11.SlackBuild

-|   |   |-- x11-skel

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- manpages

-|   |   |   |   `-- xwmconfig.1

-|   |   |   |-- scripts

-|   |   |   |   |-- setup.xwmconfig

-|   |   |   |   |-- xorg.conf-fbdev

-|   |   |   |   |-- xorg.conf-vesa

-|   |   |   |   |-- xorgsetup

-|   |   |   |   `-- xwmconfig

-|   |   |   |-- slack-desc

-|   |   |   `-- x11-skel.SlackBuild

-|   |   |-- xaw3d

-|   |   |   |-- pull-xaw3d.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- xaw3d-20110415git.tar.xz

-|   |   |   `-- xaw3d.SlackBuild

-|   |   |-- xdg-user-dirs

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xdg-user-dirs-0.13.tar.xz

-|   |   |   `-- xdg-user-dirs.SlackBuild

-|   |   |-- xdg-utils

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xdg-utils-1.1.0-rc1.tar.bz2

-|   |   |   |-- xdg-utils-cvs_checkout.sh

-|   |   |   |-- xdg-utils.SlackBuild

-|   |   |   `-- xdg-utils.info

-|   |   `-- xterm

-|   |       |-- slack-desc

-|   |       |-- xterm-267.tar.xz

-|   |       `-- xterm.SlackBuild

-|   |-- xap

-|   |   |-- MPlayer

-|   |   |   |-- Blue-1.7.tar.bz2

-|   |   |   |-- MPlayer.SlackBuild

-|   |   |   |-- MPlayer_nolibdvdcss-20101218.tar.xz

-|   |   |   `-- slack-desc

-|   |   |-- audacious

-|   |   |   |-- audacious-2.4.4.tar.xz

-|   |   |   |-- audacious.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- audacious-plugins

-|   |   |   |-- audacious-plugins-2.4.4.tar.xz

-|   |   |   |-- audacious-plugins.SlackBuild

-|   |   |   |-- audacious-plugins.alsa.noise.is.not.helpful.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- blackbox

-|   |   |   |-- bbkeys-0.9.1.tar.xz

-|   |   |   |-- blackbox-0.70.1-gcc-4.3.patch.gz

-|   |   |   |-- blackbox-0.70.1.tar.xz

-|   |   |   |-- blackbox.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- xinitrc.blackbox.gz

-|   |   |-- blueman

-|   |   |   |-- blueman-open

-|   |   |   |-- blueman-r708.tar.xz

-|   |   |   |-- blueman-use_blueman-open_for_obexfs.diff.gz

-|   |   |   |-- blueman.SlackBuild

-|   |   |   |-- doinst.sh.gz

-|   |   |   `-- slack-desc

-|   |   |-- electricsheep

-|   |   |   |-- README.slackware

-|   |   |   |-- electricsheep-20090306.tar.xz

-|   |   |   |-- electricsheep.SlackBuild

-|   |   |   |-- electricsheep.mplayer.diff.gz

-|   |   |   |-- electricsheep_gnome-open.patch

-|   |   |   `-- slack-desc

-|   |   |-- fluxbox

-|   |   |   |-- fluxbox-1.3.1.tar.xz

-|   |   |   |-- fluxbox.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   `-- xinitrc.fluxbox.gz

-|   |   |-- fvwm

-|   |   |   |-- ancient-icons.tar.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- fvwm-2.4.20.tar.bz2

-|   |   |   |-- fvwm.SlackBuild

-|   |   |   |-- fvwm.colormap.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- system.fvwm2rc.gz

-|   |   |   `-- xinitrc.fvwm2.gz

-|   |   |-- geeqie

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- geeqie-1.0.tar.xz

-|   |   |   |-- geeqie.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gftp

-|   |   |   |-- gftp-2.0.19.tar.bz2

-|   |   |   |-- gftp.SlackBuild

-|   |   |   |-- gftp.desktop.gz

-|   |   |   `-- slack-desc

-|   |   |-- gimp

-|   |   |   |-- gimp-2.6.11.tar.xz

-|   |   |   |-- gimp.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gkrellm

-|   |   |   |-- gkrellm-2.3.5.tar.bz2

-|   |   |   |-- gkrellm-countdown-0.1.1.tar.gz

-|   |   |   |-- gkrellm.SlackBuild

-|   |   |   |-- gkrellm.theme.defaults.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- gnuchess

-|   |   |   |-- Sjeng-Free-11.2.tar.bz2

-|   |   |   |-- chess.png

-|   |   |   |-- eboard-1.1.1.tar.bz2

-|   |   |   |-- eboard.assert.diff.gz

-|   |   |   |-- eboard.desktop

-|   |   |   |-- gnuchess-5.08.tar.xz

-|   |   |   |-- gnuchess.SlackBuild

-|   |   |   |-- slack-desc

-|   |   |   |-- xboard-4.5.1.tar.xz

-|   |   |   `-- xboard.desktop

-|   |   |-- gnuplot

-|   |   |   |-- gnuplot-4.4.3.tar.xz

-|   |   |   |-- gnuplot.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gucharmap

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- gucharmap-2.33.2.tar.xz

-|   |   |   |-- gucharmap.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- gv

-|   |   |   |-- gv-3.7.1.tar.xz

-|   |   |   |-- gv.SlackBuild

-|   |   |   |-- gv.keysym.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- imagemagick

-|   |   |   |-- ImageMagick-6.6.6-10.tar.xz

-|   |   |   |-- imagemagick.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- mozilla-firefox

-|   |   |   |-- firefox-4.0.source.tar.bz2

-|   |   |   |-- firefox-4.0.source.tar.bz2.asc

-|   |   |   |-- firefox.moz_plugin_path.diff.gz

-|   |   |   |-- firefox.png

-|   |   |   |-- mimeTypes.rdf.gz

-|   |   |   |-- mozilla-firefox-mimeTypes-fix.diff.gz

-|   |   |   |-- mozilla-firefox.SlackBuild

-|   |   |   |-- mozilla-firefox.desktop

-|   |   |   `-- slack-desc

-|   |   |-- mozilla-thunderbird

-|   |   |   |-- mimeTypes.rdf.gz

-|   |   |   |-- mozilla-thunderbird.SlackBuild

-|   |   |   |-- mozilla-thunderbird.desktop

-|   |   |   |-- slack-desc

-|   |   |   |-- thunderbird-3.1.9.source.tar.bz2

-|   |   |   |-- thunderbird-3.1.9.source.tar.bz2.asc

-|   |   |   `-- thunderbird.png

-|   |   |-- pan

-|   |   |   |-- pan-0.134.tar.xz

-|   |   |   |-- pan.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- pidgin

-|   |   |   |-- pidgin-2.7.11.tar.xz

-|   |   |   |-- pidgin-encryption-3.1.tar.gz

-|   |   |   |-- pidgin.SlackBuild

-|   |   |   |-- purple-allow-sign-rsa-md5.patch.gz

-|   |   |   `-- slack-desc

-|   |   |-- rdesktop

-|   |   |   |-- rdesktop-1.6.0.tar.bz2

-|   |   |   |-- rdesktop.CVE-2011-1595.diff.gz

-|   |   |   |-- rdesktop.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- rxvt

-|   |   |   |-- rxvt-2.7.10.tar.bz2

-|   |   |   |-- rxvt.SlackBuild

-|   |   |   |-- rxvt.utempter.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- sane

-|   |   |   |-- dll.conf.additions.gz

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- sane-backends-1.0.22.tar.bz2

-|   |   |   |-- sane-frontends-1.0.14-sane_cap_always_settable.diff.gz

-|   |   |   |-- sane-frontends-1.0.14.tar.bz2

-|   |   |   |-- sane.SlackBuild

-|   |   |   `-- slack-desc

-|   |   |-- seamonkey

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- pkgconfig

-|   |   |   |   |-- seamonkey-gtkmozembed.pc

-|   |   |   |   |-- seamonkey-js.pc

-|   |   |   |   |-- seamonkey-nspr.pc

-|   |   |   |   |-- seamonkey-nss.pc

-|   |   |   |   |-- seamonkey-plugin.pc

-|   |   |   |   `-- seamonkey-xpcom.pc

-|   |   |   |-- seamonkey-2.1b3.source.tar.xz

-|   |   |   |-- seamonkey-icon.png

-|   |   |   |-- seamonkey-mail-icon.png

-|   |   |   |-- seamonkey-mail.desktop

-|   |   |   |-- seamonkey.SlackBuild

-|   |   |   |-- seamonkey.desktop

-|   |   |   `-- slack-desc

-|   |   |-- seyon

-|   |   |   |-- seyon-2.20c.lsm

-|   |   |   |-- seyon-2.20c.tar.gz

-|   |   |   |-- seyon.SlackBuild

-|   |   |   |-- seyon_2.20c-16.diff.gz

-|   |   |   `-- slack-desc

-|   |   |-- thunar-volman

-|   |   |   |-- slack-desc

-|   |   |   |-- thunar-volman-0.3.80.tar.bz2

-|   |   |   `-- thunar-volman.SlackBuild

-|   |   |-- vim-gvim -> ../ap/vim

-|   |   |-- windowmaker

-|   |   |   |-- WindowMaker-20060427cvs.tar.bz2

-|   |   |   |-- WindowMaker-extra-0.1.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- windowmaker.SlackBuild

-|   |   |   |-- windowmaker.no-mmx.diff.gz

-|   |   |   |-- windowmaker.png.1.4.0.diff.gz

-|   |   |   |-- wmaker.inst.diff.gz

-|   |   |   `-- xinitrc.wmaker.gz

-|   |   |-- x11-ssh-askpass

-|   |   |   |-- README

-|   |   |   |-- slack-desc

-|   |   |   |-- x11-ssh-askpass-1.2.4.1.tar.gz

-|   |   |   |-- x11-ssh-askpass.SlackBuild

-|   |   |   |-- x11-ssh-askpass.info

-|   |   |   `-- xprofile.sample

-|   |   |-- x3270

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- x3270-3.3.7p8.tar.bz2

-|   |   |   `-- x3270.SlackBuild

-|   |   |-- xaos

-|   |   |   |-- slack-desc

-|   |   |   |-- xaos-3.5.tar.xz

-|   |   |   |-- xaos.6.gz

-|   |   |   |-- xaos.SlackBuild

-|   |   |   |-- xaos.desktop

-|   |   |   `-- xaos.png

-|   |   |-- xchat

-|   |   |   |-- slack-desc

-|   |   |   |-- xchat-2.8.8.tar.bz2

-|   |   |   `-- xchat.SlackBuild

-|   |   |-- xfce

-|   |   |   |-- icons.tar.xz

-|   |   |   |-- patches

-|   |   |   |   |-- Thunar.thunar-vfs-io-local.diff.gz

-|   |   |   |   |-- fixup_comments_in_xfce-utils-Xft.xrdb.diff.gz

-|   |   |   |   |-- mousepad-fix_find.diff.gz

-|   |   |   |   |-- mousepad-fix_find_and_replace.diff.gz

-|   |   |   |   |-- no_sensitive_panel_during_plugin_moves.patch.gz

-|   |   |   |   |-- thunar-1.0.2-fixup_docdir.diff.gz

-|   |   |   |   |-- xfcalendar.desktop.in.diff.gz

-|   |   |   |   |-- xfce-utils-load_systemwide_Xmodmap.diff.gz

-|   |   |   |   |-- xfce-utils.xinitrc.consolekit.diff.gz

-|   |   |   |   |-- xfdesktop-fix_education_icon.diff.gz

-|   |   |   |   `-- xfsm-compat-kde.c-start-kde4-services.diff.gz

-|   |   |   |-- profile.d

-|   |   |   |   |-- xfce.csh

-|   |   |   |   `-- xfce.sh

-|   |   |   |-- slack-desc

-|   |   |   |-- src

-|   |   |   |   |-- Terminal-0.4.6.tar.xz

-|   |   |   |   |-- Thunar-1.0.2.tar.xz

-|   |   |   |   |-- exo-0.3.107.tar.xz

-|   |   |   |   |-- gtk-xfce-engine-2.6.0.tar.xz

-|   |   |   |   |-- libxfce4menu-4.6.2.tar.xz

-|   |   |   |   |-- libxfce4util-4.6.2.tar.xz

-|   |   |   |   |-- libxfcegui4-4.6.4.tar.xz

-|   |   |   |   |-- mousepad-0.2.16.tar.xz

-|   |   |   |   |-- orage-4.6.1.tar.xz

-|   |   |   |   |-- xfce-utils-4.6.2.tar.xz

-|   |   |   |   |-- xfce4-appfinder-4.6.2.tar.xz

-|   |   |   |   |-- xfce4-dev-tools-4.8.0.tar.xz

-|   |   |   |   |-- xfce4-mixer-4.6.1.tar.xz

-|   |   |   |   |-- xfce4-panel-4.6.4.tar.xz

-|   |   |   |   |-- xfce4-session-4.6.2.tar.xz

-|   |   |   |   |-- xfce4-settings-4.6.5.tar.xz

-|   |   |   |   |-- xfconf-4.6.2.tar.xz

-|   |   |   |   |-- xfdesktop-4.6.2.tar.xz

-|   |   |   |   |-- xfprint-4.6.1.tar.xz

-|   |   |   |   |-- xfwm4-4.6.2.tar.xz

-|   |   |   |   `-- xfwm4-themes-4.6.0.tar.xz

-|   |   |   `-- xfce.SlackBuild

-|   |   |-- xfce4-notifyd

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xfce4-notifyd-0.1.1.tar.bz2

-|   |   |   `-- xfce4-notifyd.SlackBuild

-|   |   |-- xfce4-power-manager

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xfce4-power-manager-0.8.5.tar.bz2

-|   |   |   `-- xfce4-power-manager.SlackBuild

-|   |   |-- xfractint

-|   |   |   |-- palette.maps.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xfractint-20.04p09.tar.bz2

-|   |   |   `-- xfractint.SlackBuild

-|   |   |-- xgames

-|   |   |   |-- maze.diff.gz

-|   |   |   |-- maze.tar.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- spider.diff.gz

-|   |   |   |-- spider.tar.gz

-|   |   |   |-- xcolormap.diff.gz

-|   |   |   |-- xcolormap.tar.gz

-|   |   |   |-- xcuckoo-1.1.tar.gz

-|   |   |   |-- xcuckoo.diff.gz

-|   |   |   |-- xgames.SlackBuild

-|   |   |   |-- xlander-2009-07-18.diff.gz

-|   |   |   |-- xlander.fixes.diff.gz

-|   |   |   |-- xlander.tar.gz

-|   |   |   |-- xminesweep3.0.tar.gz

-|   |   |   |-- xneko.tar.gz

-|   |   |   |-- xroach.tar.gz

-|   |   |   `-- xsnow-1.42.tar.gz

-|   |   |-- xine-lib

-|   |   |   |-- slack-desc

-|   |   |   |-- xine-lib-1.1.19.tar.xz

-|   |   |   |-- xine-lib.SlackBuild

-|   |   |   `-- xine-lib.XvMClib.h.diff.gz

-|   |   |-- xine-ui

-|   |   |   |-- slack-desc

-|   |   |   |-- xine-ui-0.99.5.tar.bz2

-|   |   |   |-- xine-ui.SlackBuild

-|   |   |   |-- xine-ui.png14.diff.gz

-|   |   |   `-- xine.desktop.gz

-|   |   |-- xlockmore

-|   |   |   |-- l-bob.README

-|   |   |   |-- l-bob.xbm

-|   |   |   |-- l-linux.xbm

-|   |   |   |-- s-bob.xbm

-|   |   |   |-- slack-desc

-|   |   |   |-- xlockmore-5.32.tar.bz2

-|   |   |   |-- xlockmore-5.32.tar.bz2.asc

-|   |   |   |-- xlockmore.SlackBuild

-|   |   |   `-- xlockmore.bitmap.diff.gz

-|   |   |-- xmms

-|   |   |   |-- slack-desc

-|   |   |   |-- xmms-1.2.11.tar.bz2

-|   |   |   |-- xmms.SlackBuild

-|   |   |   |-- xmms.desktop

-|   |   |   |-- xmms.gtk.doublesize.diff.gz

-|   |   |   |-- xmms.png

-|   |   |   `-- xmms.wmxmms_vis_depth_workaround.diff.gz

-|   |   |-- xpaint

-|   |   |   |-- slack-desc

-|   |   |   |-- xpaint-2.8.16.tar.bz2

-|   |   |   `-- xpaint.SlackBuild

-|   |   |-- xpdf

-|   |   |   |-- doinst.sh.gz

-|   |   |   |-- lang

-|   |   |   |   |-- xpdf-arabic.diff.gz

-|   |   |   |   |-- xpdf-arabic.tar.gz

-|   |   |   |   |-- xpdf-chinese-simplified.diff.gz

-|   |   |   |   |-- xpdf-chinese-simplified.tar.gz

-|   |   |   |   |-- xpdf-chinese-traditional.diff.gz

-|   |   |   |   |-- xpdf-chinese-traditional.tar.gz

-|   |   |   |   |-- xpdf-cyrillic.diff.gz

-|   |   |   |   |-- xpdf-cyrillic.tar.gz

-|   |   |   |   |-- xpdf-greek.diff.gz

-|   |   |   |   |-- xpdf-greek.tar.gz

-|   |   |   |   |-- xpdf-hebrew.diff.gz

-|   |   |   |   |-- xpdf-hebrew.tar.gz

-|   |   |   |   |-- xpdf-japanese.diff.gz

-|   |   |   |   |-- xpdf-japanese.tar.gz

-|   |   |   |   |-- xpdf-korean.diff.gz

-|   |   |   |   |-- xpdf-korean.tar.gz

-|   |   |   |   |-- xpdf-latin2.diff.gz

-|   |   |   |   |-- xpdf-latin2.tar.gz

-|   |   |   |   |-- xpdf-thai.diff.gz

-|   |   |   |   |-- xpdf-thai.tar.gz

-|   |   |   |   |-- xpdf-turkish.diff.gz

-|   |   |   |   `-- xpdf-turkish.tar.gz

-|   |   |   |-- patches

-|   |   |   |   |-- xpdf-3.02pl1.patch

-|   |   |   |   |-- xpdf-3.02pl1.patch.sig

-|   |   |   |   |-- xpdf-3.02pl2.patch

-|   |   |   |   |-- xpdf-3.02pl2.patch.sig

-|   |   |   |   |-- xpdf-3.02pl3.patch

-|   |   |   |   |-- xpdf-3.02pl3.patch.sig

-|   |   |   |   |-- xpdf-3.02pl4.patch

-|   |   |   |   |-- xpdf-3.02pl4.patch.sig

-|   |   |   |   |-- xpdf-3.02pl5.patch

-|   |   |   |   |-- xpdf-3.02pl5.patch.sig

-|   |   |   |   |-- xpdf-3.02pl6.patch

-|   |   |   |   |-- xpdf-3.02pl6.patch.sig

-|   |   |   |   |-- xpdf-resizefix.diff.gz

-|   |   |   |   |-- xpdf_3.02-1.3.diff.gz

-|   |   |   |   `-- xpdfrc.diff.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xpdf-3.02.tar.gz

-|   |   |   |-- xpdf-3.02.tar.gz.sig

-|   |   |   |-- xpdf.SlackBuild

-|   |   |   `-- xpdf.desktop

-|   |   |-- xsane

-|   |   |   |-- slack-desc

-|   |   |   |-- xsane-0.998.tar.xz

-|   |   |   `-- xsane.SlackBuild

-|   |   |-- xscreensaver

-|   |   |   |-- setuid.c.gz

-|   |   |   |-- slack-desc

-|   |   |   |-- xscreensaver-5.12.tar.xz

-|   |   |   |-- xscreensaver.SlackBuild

-|   |   |   |-- xscreensaver.electricsheep.diff.gz

-|   |   |   `-- xscreensaver.setuid.diff.gz

-|   |   |-- xv

-|   |   |   |-- slack-desc

-|   |   |   |-- xv-3.10.tar.xz

-|   |   |   |-- xv-3.10a-enhancements.20070520-20081216.diff.bz2

-|   |   |   |-- xv-3.10a-jumbo-README.txt

-|   |   |   |-- xv-3.10a-jumbo-additions.diff.bz2

-|   |   |   |-- xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2

-|   |   |   |-- xv-3.10a.patch.gz

-|   |   |   |-- xv.SlackBuild

-|   |   |   |-- xv.jasper.diff.gz

-|   |   |   |-- xv.prefix.diff.gz

-|   |   |   `-- xv.prefix_x86_64.diff.gz

-|   |   `-- xxgdb

-|   |       |-- slack-desc

-|   |       |-- xxgdb-1.08-glibc.patch.xz

-|   |       |-- xxgdb-1.12-debian-filemenu.patch.xz

-|   |       |-- xxgdb-1.12-debian-pty.patch.xz

-|   |       |-- xxgdb-1.12-mandriva.patch.xz

-|   |       |-- xxgdb-1.12-sysv.patch.xz

-|   |       |-- xxgdb-1.12.tar.xz

-|   |       `-- xxgdb.SlackBuild

-|   `-- y

-|       `-- bsd-games

-|           |-- bsd-games-2.13.lsm

-|           |-- bsd-games-2.13.tar.bz2

-|           |-- bsd-games-login-fortune.csh

-|           |-- bsd-games-login-fortune.sh

-|           |-- bsd-games.SlackBuild

-|           |-- bsd-games.config.params.diff.gz

-|           |-- bsd-games.fortlen.diff.gz

-|           |-- bsd-games.fortunepath.diff.gz

-|           |-- bsd-games.getline.diff.gz

-|           |-- bsd-games.ospeed.diff.gz

-|           |-- bsd-games.phantasia_install_fix.diff.gz

-|           |-- bsd-games.pom.diff.gz

-|           |-- bsd-games.strfile.8.diff.gz

-|           |-- bsd-games.trek-gcc4.diff.gz

-|           |-- fortunes-linuxcookie.tar.gz

-|           |-- fortunes-o.tar.gz

-|           |-- hangman-words.gz

-|           `-- slack-desc

-|-- testing

-|   |-- CHECKSUMS.md5

-|   |-- CHECKSUMS.md5.asc

-|   |-- FILE_LIST

-|   |-- MANIFEST.bz2

-|   |-- PACKAGES.TXT

-|   |-- packages

-|   |   |-- kernel-firmware-2.6.38.4-noarch-1.txt

-|   |   |-- kernel-firmware-2.6.38.4-noarch-1.txz

-|   |   |-- kernel-firmware-2.6.38.4-noarch-1.txz.asc

-|   |   |-- kernel-generic-2.6.38.4-x86_64-1.txt

-|   |   |-- kernel-generic-2.6.38.4-x86_64-1.txz

-|   |   |-- kernel-generic-2.6.38.4-x86_64-1.txz.asc

-|   |   |-- kernel-headers-2.6.38.4-x86-1.txt

-|   |   |-- kernel-headers-2.6.38.4-x86-1.txz

-|   |   |-- kernel-headers-2.6.38.4-x86-1.txz.asc

-|   |   |-- kernel-huge-2.6.38.4-x86_64-1.txt

-|   |   |-- kernel-huge-2.6.38.4-x86_64-1.txz

-|   |   |-- kernel-huge-2.6.38.4-x86_64-1.txz.asc

-|   |   |-- kernel-modules-2.6.38.4-x86_64-1.txt

-|   |   |-- kernel-modules-2.6.38.4-x86_64-1.txz

-|   |   |-- kernel-modules-2.6.38.4-x86_64-1.txz.asc

-|   |   |-- kernel-source-2.6.38.4-noarch-1.txt

-|   |   |-- kernel-source-2.6.38.4-noarch-1.txz

-|   |   |-- kernel-source-2.6.38.4-noarch-1.txz.asc

-|   |   |-- libdrm-2.4.25-x86_64-1.txt

-|   |   |-- libdrm-2.4.25-x86_64-1.txz

-|   |   |-- libdrm-2.4.25-x86_64-1.txz.asc

-|   |   |-- mesa-7.10.2-x86_64-1.txt

-|   |   |-- mesa-7.10.2-x86_64-1.txz

-|   |   |-- mesa-7.10.2-x86_64-1.txz.asc

-|   |   |-- xf86-video-nouveau-git_20110417_8378443-x86_64-1.txt

-|   |   |-- xf86-video-nouveau-git_20110417_8378443-x86_64-1.txz

-|   |   `-- xf86-video-nouveau-git_20110417_8378443-x86_64-1.txz.asc

-|   `-- source

-|       |-- libdrm

-|       |   |-- libdrm-2.4.25.tar.xz

-|       |   |-- libdrm.SlackBuild

-|       |   `-- slack-desc

-|       |-- linux-2.6.35.12-configs

-|       |   |-- config-generic-2.6.35.12

-|       |   `-- config-huge-2.6.35.12

-|       |-- linux-2.6.38.4-configs

-|       |   |-- config-generic-2.6.38.4

-|       |   `-- config-huge-2.6.38.4

-|       |-- linux-2.6.39-rc4-configs

-|       |   |-- config-generic-2.6.39-rc4

-|       |   `-- config-huge-2.6.39-rc4

-|       |-- mesa

-|       |   |-- MesaGLUT-7.10.2.tar.xz

-|       |   |-- MesaLib-7.10.2.tar.xz

-|       |   |-- README.GIT

-|       |   |-- get-mesa.sh

-|       |   |-- mesa-demos-8.0.1.tar.xz

-|       |   |-- mesa.SlackBuild

-|       |   |-- mesa.url

-|       |   |-- patches

-|       |   |   |-- i915_fragment_shader_disable.patch.gz

-|       |   |   `-- mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz

-|       |   `-- slack-desc

-|       `-- xf86-video-nouveau

-|           |-- arch.use.flags

-|           |-- build

-|           |-- configure

-|           |   `-- xf86-video-nouveau

-|           |-- doinst.sh

-|           |-- get-xf86-video-nouveau.sh

-|           |-- modularize

-|           |-- noarch

-|           |-- package-blacklist

-|           |-- slack-desc

-|           |   `-- xf86-video-nouveau

-|           |-- src

-|           |   `-- driver

-|           |       `-- xf86-video-nouveau-git_20110417_8378443.tar.xz

-|           |-- x11.SlackBuild

-|           `-- xf86-video-nouveau.SlackBuild

-`-- usb-and-pxe-installers

-    |-- README_PXE.TXT

-    |-- README_USB.TXT

-    |-- pxelinux.cfg_default

-    |-- usbboot.img

-    `-- usbimg2disk.sh

+`-- source

+    |-- CHECKSUMS.md5

+    |-- CHECKSUMS.md5.asc

+    |-- FILE_LIST

+    |-- MANIFEST.bz2

+    |-- README.TXT

+    |-- a

+    |   |-- aaa_base

+    |   |   |-- _aaa_base.tar.gz

+    |   |   |-- aaa_base.SlackBuild

+    |   |   |-- os-release

+    |   |   |-- slack-desc

+    |   |   `-- slackware-version

+    |   |-- aaa_elflibs

+    |   |   |-- aaa_elflibs.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- symlinks-to-tracked-libs

+    |   |   `-- tracked-files

+    |   |-- aaa_terminfo

+    |   |   |-- aaa_terminfo.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- acl

+    |   |   |-- acl-2.2.51.src.tar.xz

+    |   |   |-- acl.SlackBuild

+    |   |   |-- acl.destdir.diff.gz

+    |   |   `-- slack-desc

+    |   |-- acpid

+    |   |   |-- acpi_handler.sh.gz

+    |   |   |-- acpid-2.0.16.tar.xz

+    |   |   |-- acpid.SlackBuild

+    |   |   |-- default.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.acpid.gz

+    |   |   `-- slack-desc

+    |   |-- apmd

+    |   |   |-- apmd-3.2.2.tar.bz2

+    |   |   |-- apmd.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- attr

+    |   |   |-- attr-2.4.46.src.tar.xz

+    |   |   |-- attr.SlackBuild

+    |   |   |-- attr.destdir.diff.gz

+    |   |   |-- build

+    |   |   `-- slack-desc

+    |   |-- bash

+    |   |   |-- bash-4.2-patches

+    |   |   |   |-- bash42-001

+    |   |   |   |-- bash42-001.sig

+    |   |   |   |-- bash42-002

+    |   |   |   |-- bash42-002.sig

+    |   |   |   |-- bash42-003

+    |   |   |   |-- bash42-003.sig

+    |   |   |   |-- bash42-004

+    |   |   |   |-- bash42-004.sig

+    |   |   |   |-- bash42-005

+    |   |   |   |-- bash42-005.sig

+    |   |   |   |-- bash42-006

+    |   |   |   |-- bash42-006.sig

+    |   |   |   |-- bash42-007

+    |   |   |   |-- bash42-007.sig

+    |   |   |   |-- bash42-008

+    |   |   |   |-- bash42-008.sig

+    |   |   |   |-- bash42-009

+    |   |   |   |-- bash42-009.sig

+    |   |   |   |-- bash42-010

+    |   |   |   |-- bash42-010.sig

+    |   |   |   |-- bash42-011

+    |   |   |   |-- bash42-011.sig

+    |   |   |   |-- bash42-012

+    |   |   |   |-- bash42-012.sig

+    |   |   |   |-- bash42-013

+    |   |   |   |-- bash42-013.sig

+    |   |   |   |-- bash42-014

+    |   |   |   |-- bash42-014.sig

+    |   |   |   |-- bash42-015

+    |   |   |   |-- bash42-015.sig

+    |   |   |   |-- bash42-016

+    |   |   |   |-- bash42-016.sig

+    |   |   |   |-- bash42-017

+    |   |   |   |-- bash42-017.sig

+    |   |   |   |-- bash42-018

+    |   |   |   |-- bash42-018.sig

+    |   |   |   |-- bash42-019

+    |   |   |   |-- bash42-019.sig

+    |   |   |   |-- bash42-020

+    |   |   |   |-- bash42-020.sig

+    |   |   |   |-- bash42-021

+    |   |   |   |-- bash42-021.sig

+    |   |   |   |-- bash42-022

+    |   |   |   |-- bash42-022.sig

+    |   |   |   |-- bash42-023

+    |   |   |   |-- bash42-023.sig

+    |   |   |   |-- bash42-024

+    |   |   |   |-- bash42-024.sig

+    |   |   |   |-- bash42-025

+    |   |   |   |-- bash42-025.sig

+    |   |   |   |-- bash42-026

+    |   |   |   |-- bash42-026.sig

+    |   |   |   |-- bash42-027

+    |   |   |   |-- bash42-027.sig

+    |   |   |   |-- bash42-028

+    |   |   |   |-- bash42-028.sig

+    |   |   |   |-- bash42-029

+    |   |   |   |-- bash42-029.sig

+    |   |   |   |-- bash42-030

+    |   |   |   |-- bash42-030.sig

+    |   |   |   |-- bash42-031

+    |   |   |   |-- bash42-031.sig

+    |   |   |   |-- bash42-032

+    |   |   |   |-- bash42-032.sig

+    |   |   |   |-- bash42-033

+    |   |   |   |-- bash42-033.sig

+    |   |   |   |-- bash42-034

+    |   |   |   |-- bash42-034.sig

+    |   |   |   |-- bash42-035

+    |   |   |   |-- bash42-035.sig

+    |   |   |   |-- bash42-036

+    |   |   |   |-- bash42-036.sig

+    |   |   |   |-- bash42-037

+    |   |   |   `-- bash42-037.sig

+    |   |   |-- bash-4.2.tar.xz

+    |   |   |-- bash.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- bin

+    |   |   |-- banners.tar.gz

+    |   |   |-- bin.SlackBuild

+    |   |   |-- debianutils_2.7.dsc

+    |   |   |-- debianutils_2.7.tar.gz

+    |   |   |-- fbset-2.1.tar.gz

+    |   |   |-- scripts

+    |   |   |   |-- diskcopy.gz

+    |   |   |   `-- xx.gz

+    |   |   |-- slack-desc

+    |   |   `-- todos.tar.gz

+    |   |-- btrfs-progs

+    |   |   |-- btrfs-progs-20120821.tar.xz

+    |   |   |-- btrfs-progs.SlackBuild

+    |   |   |-- fsck.btrfs

+    |   |   `-- slack-desc

+    |   |-- bzip2

+    |   |   |-- bzip2-1.0.6.tar.gz

+    |   |   |-- bzip2.SlackBuild

+    |   |   |-- bzip2.saneso.diff.gz

+    |   |   `-- slack-desc

+    |   |-- coreutils

+    |   |   |-- DIR_COLORS.gz

+    |   |   |-- coreutils-8.19.tar.xz

+    |   |   |-- coreutils-8.19.tar.xz.sig

+    |   |   |-- coreutils-dircolors.csh.gz

+    |   |   |-- coreutils-dircolors.sh.gz

+    |   |   |-- coreutils.SlackBuild

+    |   |   |-- coreutils.uname.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- cpio

+    |   |   |-- cpio-2.11.tar.xz

+    |   |   |-- cpio.32bit.crc.diff.gz

+    |   |   |-- cpio.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cpufrequtils

+    |   |   |-- cpufrequtils-008.tar.bz2

+    |   |   |-- cpufrequtils-008.tar.bz2.sign

+    |   |   |-- cpufrequtils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cryptsetup

+    |   |   |-- cryptsetup-1.4.3.tar.bz2

+    |   |   |-- cryptsetup-1.4.3.tar.bz2.asc

+    |   |   |-- cryptsetup.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cups

+    |   |   |-- cups-1.5.4-source.tar.xz

+    |   |   |-- cups-samba-5.0rc3.tar.gz

+    |   |   |-- cups-windows-6.0-source.tar.bz2

+    |   |   |-- cups.SlackBuild

+    |   |   |-- cups.url

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   `-- usb-backend-reset-after-job-only-for-specific-devices.patch.gz

+    |   |-- cxxlibs

+    |   |   |-- cxxlibs.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- symlinks-to-tracked-libs

+    |   |   `-- symlinks-to-tracked-libs64

+    |   |-- dbus

+    |   |   |-- dbus-1.4.20.tar.xz

+    |   |   |-- dbus-1.4.x-allow_root_globally.diff.gz

+    |   |   |-- dbus.SlackBuild

+    |   |   |-- dbus.set.home.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.messagebus.gz

+    |   |   `-- slack-desc

+    |   |-- dcron

+    |   |   |-- crontab.c.O_EXCL.diff.gz

+    |   |   |-- crontab.root.gz

+    |   |   |-- dcron-4.5.tar.gz

+    |   |   |-- dcron.SlackBuild

+    |   |   |-- defs.h.TMPDIR.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- run-parts.8.gz

+    |   |   |-- run-parts.gz

+    |   |   `-- slack-desc

+    |   |-- devs

+    |   |   |-- _devs.tar.gz

+    |   |   |-- devs.SlackBuild

+    |   |   |-- makedev.hd.diff.gz

+    |   |   |-- makedev_2.3.1-46.2.diff.gz

+    |   |   |-- makedev_2.3.1.hd.diff.gz

+    |   |   |-- makedev_2.3.1.orig.tar.gz

+    |   |   |-- makedev_2.3.1.slack.diff.gz

+    |   |   `-- slack-desc

+    |   |-- dialog

+    |   |   |-- dialog-1.1-20100428.tar.xz

+    |   |   |-- dialog.SlackBuild

+    |   |   |-- dialog.smaller.min.height.diff.gz

+    |   |   `-- slack-desc

+    |   |-- dosfstools

+    |   |   |-- dosfstools-3.0.11.tar.bz2

+    |   |   |-- dosfstools-3.0.11.tar.bz2.sign

+    |   |   |-- dosfstools.SlackBuild

+    |   |   |-- dosfstools.paths.diff.gz

+    |   |   `-- slack-desc

+    |   |-- e2fsprogs

+    |   |   |-- doinst.sh.gz

+    |   |   |-- e2fsprogs-1.42.6.tar.sign

+    |   |   |-- e2fsprogs-1.42.6.tar.xz

+    |   |   |-- e2fsprogs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ed

+    |   |   |-- ed-1.6.tar.xz

+    |   |   |-- ed.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- eject

+    |   |   |-- eject-2.1.5.tar.bz2

+    |   |   |-- eject.SlackBuild

+    |   |   |-- eject.spaces.diff.gz

+    |   |   |-- eject_for_mac.patch.gz

+    |   |   `-- slack-desc

+    |   |-- elvis

+    |   |   |-- elvis-2.2_0.tar.bz2

+    |   |   |-- elvis.SlackBuild

+    |   |   |-- elvis.clr

+    |   |   |-- elvis.clr.orig

+    |   |   |-- elvis.ref.c.getline.diff.gz

+    |   |   `-- slack-desc

+    |   |-- etc

+    |   |   |-- _etc.tar.gz

+    |   |   |-- etc.SlackBuild

+    |   |   |-- nsswitch.conf.gz

+    |   |   |-- slack-desc

+    |   |   `-- termcap-BSD.gz

+    |   |-- file

+    |   |   |-- file-5.11.tar.xz

+    |   |   |-- file.SlackBuild

+    |   |   |-- file.crdaregbin.magic.gz

+    |   |   |-- file.etc.file.diff.gz

+    |   |   |-- file.quiet.diff.gz

+    |   |   |-- file.short.diff.gz

+    |   |   |-- file.xz.magic.gz

+    |   |   |-- file.zisofs.magic.gz

+    |   |   `-- slack-desc

+    |   |-- findutils

+    |   |   |-- findutils-4.4.2.tar.xz

+    |   |   |-- findutils.SlackBuild

+    |   |   |-- findutils.no.default.options.warnings.diff.gz

+    |   |   |-- findutils.nolocate.diff.gz

+    |   |   `-- slack-desc

+    |   |-- floppy

+    |   |   |-- fdutils-5.4-20020222.diff.gz

+    |   |   |-- fdutils-5.4.tar.gz

+    |   |   |-- fdutils.mediaprm.diff.gz

+    |   |   |-- floppy.SlackBuild

+    |   |   |-- mediaprm

+    |   |   |-- mtools-3.9.8.tar.gz

+    |   |   |-- mtools.conf

+    |   |   `-- slack-desc

+    |   |-- gawk

+    |   |   |-- gawk-3.1.8.tar.xz

+    |   |   |-- gawk.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- genpower

+    |   |   |-- genpower-1.0.5.tar.gz

+    |   |   |-- genpower.SlackBuild

+    |   |   |-- genpower.halt.diff.gz

+    |   |   |-- genpower.var.diff.gz

+    |   |   `-- slack-desc

+    |   |-- gettext

+    |   |   |-- gettext-0.18.1.1.tar.bz2

+    |   |   |-- gettext-tools.SlackBuild

+    |   |   |-- gettext.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- slack-desc.gettext-tools

+    |   |-- getty-ps

+    |   |   |-- getty-ps.SlackBuild

+    |   |   |-- getty.bugfixes.diff.gz

+    |   |   |-- getty_ps-2.1.0.lsm

+    |   |   |-- getty_ps-2.1.0b.tar.gz

+    |   |   `-- slack-desc

+    |   |-- gpm

+    |   |   |-- gpm-1.20.1-consolename.patch.gz

+    |   |   |-- gpm-1.20.1-gpmopen.patch.gz

+    |   |   |-- gpm-1.20.1-idie.patch.gz

+    |   |   |-- gpm-1.20.1-input-defines.diff.gz

+    |   |   |-- gpm-1.20.1-input.patch.gz

+    |   |   |-- gpm-1.20.1-lib-silent.patch.gz

+    |   |   |-- gpm-1.20.1-math.patch.gz

+    |   |   |-- gpm-1.20.1-multilib.patch.gz

+    |   |   |-- gpm-1.20.1-no-console-error.patch.gz

+    |   |   |-- gpm-1.20.1-nodebug.patch.gz

+    |   |   |-- gpm-1.20.1-subscript.patch.gz

+    |   |   |-- gpm-1.20.1-weak-wgetch.patch.gz

+    |   |   |-- gpm-1.20.1.send-noise-to-syslogs.diff.gz

+    |   |   |-- gpm-1.20.1.tar.bz2

+    |   |   |-- gpm-evdev-cumulative.patch.gz

+    |   |   |-- gpm.SlackBuild

+    |   |   |-- gpm.evdevmakefile.patch.gz

+    |   |   |-- inputattach.c.gz

+    |   |   |-- mouseconfig.gz

+    |   |   |-- setup.mouse.gz

+    |   |   `-- slack-desc

+    |   |-- gptfdisk

+    |   |   |-- gptfdisk-0.8.5.tar.xz

+    |   |   |-- gptfdisk.SlackBuild

+    |   |   |-- gptfdisk.remove.icu4c.dep.diff.gz

+    |   |   `-- slack-desc

+    |   |-- grep

+    |   |   |-- grep-2.14.tar.xz

+    |   |   |-- grep-2.14.tar.xz.sig

+    |   |   |-- grep.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gzip

+    |   |   |-- gzip-1.5.tar.xz

+    |   |   |-- gzip-1.5.tar.xz.sig

+    |   |   |-- gzip.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- hdparm

+    |   |   |-- hdparm-9.37.tar.gz

+    |   |   |-- hdparm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- infozip

+    |   |   |-- infozip.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- unzip60.tar.xz

+    |   |   `-- zip30.tar.xz

+    |   |-- inotify-tools

+    |   |   |-- inotify-tools-3.14.tar.xz

+    |   |   |-- inotify-tools.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- isapnptools

+    |   |   |-- isapnptools-1.26.lsm

+    |   |   |-- isapnptools-1.26.tar.xz

+    |   |   |-- isapnptools.SlackBuild

+    |   |   |-- isapnptools.url

+    |   |   |-- isapnptools_1.26-5.diff.gz

+    |   |   `-- slack-desc

+    |   |-- jfsutils

+    |   |   |-- jfsutils-1.1.15.tar.xz

+    |   |   |-- jfsutils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- kbd

+    |   |   |-- kbd.SlackBuild

+    |   |   |-- setconsolefont

+    |   |   |-- setup.setconsolefont

+    |   |   |-- slack-desc

+    |   |   `-- sources

+    |   |       |-- extraf.tgz

+    |   |       |-- kbd-1.15-keycodes-man.patch.gz

+    |   |       |-- kbd-1.15-resizecon-x86_64.patch.gz

+    |   |       |-- kbd-1.15-unicode_start.patch.gz

+    |   |       |-- kbd-1.15.2-po.patch.gz

+    |   |       |-- kbd-1.15.3-fix-es-translation.patch.gz

+    |   |       |-- kbd-1.15.3.tar.xz

+    |   |       |-- kbd-latarcyrheb-16-fixed.tar.bz2

+    |   |       |-- kbd-latsun-fonts.tar.bz2

+    |   |       |-- nl.euro.diff.gz

+    |   |       |-- ro_maps.tar.bz2

+    |   |       |-- speakup-jfw.tar.gz

+    |   |       `-- speakupmap.map.gz

+    |   |-- kernel-firmware

+    |   |   |-- kernel-firmware.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- kmod

+    |   |   |-- kmod-9.tar.xz

+    |   |   |-- kmod.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- less

+    |   |   |-- less-451.tar.xz

+    |   |   |-- less.SlackBuild

+    |   |   |-- less.sysconfdir.diff.gz

+    |   |   |-- lesspipe.sh.gz

+    |   |   `-- slack-desc

+    |   |-- lha

+    |   |   |-- lha-114i.tar.gz

+    |   |   |-- lha.SlackBuild

+    |   |   |-- lha_1.14i-10.1.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libcgroup

+    |   |   |-- doinst.sh.gz

+    |   |   |-- libcgroup-0.38.tar.xz

+    |   |   |-- libcgroup.SlackBuild

+    |   |   |-- libcgroup.conf.diff.gz

+    |   |   |-- libcgroup.init.diff.gz

+    |   |   `-- slack-desc

+    |   |-- lilo

+    |   |   |-- lilo-23.2.tar.gz

+    |   |   |-- lilo-23.2.tar.gz.asc

+    |   |   |-- lilo.SlackBuild

+    |   |   |-- lilo.use_major_minor_instead_lvm_name.diff.gz

+    |   |   |-- liloconfig

+    |   |   |-- setup.liloconfig

+    |   |   |-- sl1337.bmp

+    |   |   |-- slack-desc

+    |   |   |-- slack.bmp

+    |   |   |-- slack.dat

+    |   |   |-- slack14.0.2012.bmp

+    |   |   |-- slack64.bmp

+    |   |   `-- text.lilohelp

+    |   |-- logrotate

+    |   |   |-- doinst.sh.gz

+    |   |   |-- logrotate-3.8.2.tar.xz

+    |   |   |-- logrotate.SlackBuild

+    |   |   |-- logrotate.conf.gz

+    |   |   |-- logrotate.cron.gz

+    |   |   |-- logrotate.slackware.diff.gz

+    |   |   `-- slack-desc

+    |   |-- lrzip

+    |   |   |-- doinst.sh.gz

+    |   |   |-- lrzip-0.602.tar.xz

+    |   |   |-- lrzip.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- lvm2

+    |   |   |-- LVM2.2.02.96.tar.xz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fix-build-with-udev-183.patch.gz

+    |   |   |-- lvm2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mcelog

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mcelog-1.0pre3.tar.bz2

+    |   |   |-- mcelog-1.0pre3.tar.bz2.sign

+    |   |   |-- mcelog.SlackBuild

+    |   |   |-- mcelog.init.diff.gz

+    |   |   `-- slack-desc

+    |   |-- mdadm

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mdadm-3.2.5.tar.xz

+    |   |   |-- mdadm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- minicom

+    |   |   |-- config.sub-x86_64.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- lrzsz_0.12.21-5.diff.gz

+    |   |   |-- lrzsz_0.12.21.orig.tar.gz

+    |   |   |-- minicom-2.6.tar.xz

+    |   |   |-- minicom.SlackBuild

+    |   |   |-- minicom.users.gz

+    |   |   `-- slack-desc

+    |   |-- mkinitrd

+    |   |   |-- README.initrd

+    |   |   |-- _initrd-tree.tar.gz

+    |   |   |-- busybox-1.20.1.tar.xz

+    |   |   |-- busybox-dot-config -> busybox-dot-config.1.20.x

+    |   |   |-- busybox-dot-config.1.15.x

+    |   |   |-- busybox-dot-config.1.17.x

+    |   |   |-- busybox-dot-config.1.18.x

+    |   |   |-- busybox-dot-config.1.19.x

+    |   |   |-- busybox-dot-config.1.20.x

+    |   |   |-- fixes-1.20.1

+    |   |   |   |-- busybox-1.20.1-ash.patch

+    |   |   |   |-- busybox-1.20.1-ifupdown.patch

+    |   |   |   |-- busybox-1.20.1-man.patch

+    |   |   |   `-- busybox-1.20.1-tar.patch

+    |   |   |-- init

+    |   |   |-- keymaps.tar.gz

+    |   |   |-- mkinitrd

+    |   |   |-- mkinitrd.8

+    |   |   |-- mkinitrd.SlackBuild

+    |   |   |-- mkinitrd.conf.5

+    |   |   |-- mkinitrd.conf.sample

+    |   |   |-- mkinitrd_command_generator.sh

+    |   |   `-- slack-desc

+    |   |-- mt-st

+    |   |   |-- _mt-st.tar.gz

+    |   |   |-- mt-st-0.9b.tar.gz

+    |   |   |-- mt-st.SlackBuild

+    |   |   |-- mt-st.config.diff.gz

+    |   |   |-- mt-st.man.diff.gz

+    |   |   |-- mt-st.sdlt.diff.gz

+    |   |   `-- slack-desc

+    |   |-- mtx

+    |   |   |-- mtx-1.3.12.tar.gz

+    |   |   |-- mtx.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ncompress

+    |   |   |-- ncompress-4.2.4.3.tar.gz

+    |   |   |-- ncompress.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ntfs-3g

+    |   |   |-- 10-ntfs-3g-policy.fdi

+    |   |   |-- 99-ntfs-3g.rules

+    |   |   |-- ntfs-3g.SlackBuild

+    |   |   |-- ntfs-3g_ntfsprogs-2012.1.15.tar.xz

+    |   |   `-- slack-desc

+    |   |-- patch

+    |   |   |-- patch-2.7.tar.xz

+    |   |   |-- patch-2.7.tar.xz.sig

+    |   |   |-- patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff.gz

+    |   |   |-- patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff.gz

+    |   |   |-- patch.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pciutils

+    |   |   |-- pciutils-3.1.9.tar.xz

+    |   |   |-- pciutils.SlackBuild

+    |   |   |-- pciutils.dontcompress.diff.gz

+    |   |   |-- pciutils.update.pci.ids.url.diff.gz

+    |   |   |-- pciutils.url

+    |   |   `-- slack-desc

+    |   |-- pcmciautils

+    |   |   |-- cis-cs-3.2.8.tar.gz

+    |   |   |-- config

+    |   |   |   |-- 60-pcmcia.rules

+    |   |   |   |-- config.opts

+    |   |   |   `-- rc.pcmcia

+    |   |   |-- doinst.sh.gz

+    |   |   |-- pcmciautils-017.tar.bz2

+    |   |   |-- pcmciautils-017.tar.sign

+    |   |   |-- pcmciautils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pkgtools

+    |   |   |-- manpages

+    |   |   |   |-- explodepkg.8

+    |   |   |   |-- installpkg.8

+    |   |   |   |-- makepkg.8

+    |   |   |   |-- pkgtool.8

+    |   |   |   |-- removepkg.8

+    |   |   |   |-- setup.8-deprecated

+    |   |   |   `-- upgradepkg.8

+    |   |   |-- obsolete-scripts

+    |   |   |   |-- README

+    |   |   |   `-- setup.90.modem-device

+    |   |   |-- pkgtools.SlackBuild

+    |   |   |-- scripts

+    |   |   |   |-- explodepkg

+    |   |   |   |-- installpkg

+    |   |   |   |-- makebootdisk

+    |   |   |   |-- makepkg

+    |   |   |   |-- pkgtool

+    |   |   |   |-- removepkg

+    |   |   |   |-- setup.70.install-kernel

+    |   |   |   |-- setup.80.make-bootdisk

+    |   |   |   |-- setup.htmlview

+    |   |   |   |-- setup.services

+    |   |   |   `-- upgradepkg

+    |   |   `-- slack-desc

+    |   |-- procps

+    |   |   |-- procinfo-18.tar.gz

+    |   |   |-- procinfo.gcc3.diff.gz

+    |   |   |-- procinfo.lsm

+    |   |   |-- procps-3.2.7-ps-cgroup.patch.gz

+    |   |   |-- procps-3.2.7-ps-eip64.diff.gz

+    |   |   |-- procps-3.2.8-ps-cgroup-suppress-root-group.patch.gz

+    |   |   |-- procps-3.2.8.tar.xz

+    |   |   |-- procps-3.2.8.unknown.hz.value.diff.gz

+    |   |   |-- procps.SlackBuild

+    |   |   |-- procps.nowarning.diff.gz

+    |   |   |-- procps.w.showfrom.diff.gz

+    |   |   |-- psmisc-22.13.tar.xz

+    |   |   `-- slack-desc

+    |   |-- quota

+    |   |   |-- quota-3.17.tar.xz

+    |   |   |-- quota.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- reiserfsprogs

+    |   |   |-- reiserfsprogs-3.6.21.tar.bz2

+    |   |   |-- reiserfsprogs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rpm2tgz

+    |   |   |-- getrpmtype.tar.gz

+    |   |   |-- patches

+    |   |   |   |-- 0001-fix-d-handling.patch.gz

+    |   |   |   |-- 0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz

+    |   |   |   |-- 0003-allow-every-user-to-use-rpm2tgz.patch.gz

+    |   |   |   |-- 0004-produce-more-compliant-slack-desc.patch.gz

+    |   |   |   |-- 0005-gzip-man-info-pages.patch.gz

+    |   |   |   |-- 0006-should-we-use-.txz-format-in-slackware-current.patch.gz

+    |   |   |   |-- 0007-Add-support-for-.txz-packages-and-rpm2txz-symlink.patch.gz

+    |   |   |   |-- 0008-Avoid-none-values-in-slack-desc.patch.gz

+    |   |   |   `-- 0009-Add-c-option-just-as-makepkg-c-y.patch.gz

+    |   |   |-- rpm2targz

+    |   |   |-- rpm2targz.README

+    |   |   |-- rpm2tgz.SlackBuild

+    |   |   |-- rpmoffset.c

+    |   |   `-- slack-desc

+    |   |-- sdparm

+    |   |   |-- sdparm-1.07.tar.xz

+    |   |   |-- sdparm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- sed

+    |   |   |-- sed-4.2.1.tar.xz

+    |   |   |-- sed.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- shadow

+    |   |   |-- adduser

+    |   |   |-- doinst.sh.gz

+    |   |   |-- login.defs.gz

+    |   |   |-- patches

+    |   |   |   |-- README_PATCHES

+    |   |   |   |-- r3054.diff.gz

+    |   |   |   |-- r3055.diff.gz

+    |   |   |   |-- r3060.diff.gz

+    |   |   |   |-- r3062.diff.gz

+    |   |   |   |-- r3090.diff.gz

+    |   |   |   |-- r3096.diff.gz

+    |   |   |   |-- r3160.diff.gz

+    |   |   |   |-- r3194.diff.gz

+    |   |   |   `-- unused

+    |   |   |       `-- r3299.diff.gz

+    |   |   |-- shadow-4.1.4.3.tar.xz

+    |   |   |-- shadow.SlackBuild

+    |   |   |-- shadow.man.nodups.diff.gz

+    |   |   |-- shadow.url

+    |   |   |-- slack-desc

+    |   |   `-- useradd.gz

+    |   |-- sharutils

+    |   |   |-- sharutils-4.11.tar.xz

+    |   |   |-- sharutils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- slocate

+    |   |   |-- _slocate.tar.gz

+    |   |   |-- slack-desc

+    |   |   |-- slocate-3.1.tar.gz

+    |   |   |-- slocate-3.1.tar.gz.sign

+    |   |   |-- slocate.CVE-2007-0277.diff.gz

+    |   |   |-- slocate.SlackBuild

+    |   |   `-- slocate.bigfile.diff.gz

+    |   |-- smartmontools

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- smartmontools-5.43.tar.xz

+    |   |   `-- smartmontools.SlackBuild

+    |   |-- splitvt

+    |   |   |-- slack-desc

+    |   |   |-- splitvt-1.6.5.tar.gz

+    |   |   |-- splitvt.SlackBuild

+    |   |   `-- splitvt_1.6.5-9.diff.gz

+    |   |-- sysfsutils

+    |   |   |-- slack-desc

+    |   |   |-- sysfsutils-2.1.0.tar.bz2

+    |   |   `-- sysfsutils.SlackBuild

+    |   |-- sysklogd

+    |   |   |-- config

+    |   |   |   |-- rc.syslog.new

+    |   |   |   |-- syslog.conf.new

+    |   |   |   `-- syslog.logrotate

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- sysklogd-1.5.tar.gz

+    |   |   |-- sysklogd.SlackBuild

+    |   |   `-- use_memmove_not_strcpy.diff.gz

+    |   |-- syslinux

+    |   |   |-- slack-desc

+    |   |   |-- syslinux-4.05.tar.sign

+    |   |   |-- syslinux-4.05.tar.xz

+    |   |   |-- syslinux.SlackBuild

+    |   |   `-- syslinux.altmbr.diff.gz

+    |   |-- sysvinit

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- sysvinit-2.88dsf.tar.xz

+    |   |   |-- sysvinit.SlackBuild

+    |   |   `-- sysvinit.paths.diff.gz

+    |   |-- sysvinit-functions

+    |   |   |-- README.functions

+    |   |   |-- doinst.sh.gz

+    |   |   |-- function-src-8.53.tar.bz2

+    |   |   |-- functions

+    |   |   |-- slack-desc

+    |   |   `-- sysvinit-functions.SlackBuild

+    |   |-- sysvinit-scripts

+    |   |   |-- doinst.sh.gz

+    |   |   |-- scripts

+    |   |   |   |-- fetch-rescan-scsi-bus.sh

+    |   |   |   |-- inittab

+    |   |   |   |-- rc.4

+    |   |   |   |-- rc.6

+    |   |   |   |-- rc.K

+    |   |   |   |-- rc.M

+    |   |   |   |-- rc.S

+    |   |   |   |-- rc.local

+    |   |   |   |-- rc.loop

+    |   |   |   |-- rc.sysvinit

+    |   |   |   |-- rescan-scsi-bus.sh

+    |   |   |   `-- rescan-scsi-bus.sh.diff

+    |   |   |-- slack-desc

+    |   |   `-- sysvinit-scripts.SlackBuild

+    |   |-- tar

+    |   |   |-- rmt.8.gz

+    |   |   |-- slack-desc

+    |   |   |-- tar-1.13.bzip2.diff.gz

+    |   |   |-- tar-1.13.tar.gz

+    |   |   |-- tar-1.26.tar.xz

+    |   |   |-- tar-1.26.tar.xz.sig

+    |   |   |-- tar-1.2x.support_txz.diff.gz

+    |   |   |-- tar.1.gz

+    |   |   |-- tar.SlackBuild

+    |   |   |-- tar.nolonezero.diff.gz

+    |   |   `-- tar.norecordsizespam.diff.gz

+    |   |-- tcsh

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- tcsh-6.18.01.tar.xz

+    |   |   |-- tcsh.SlackBuild

+    |   |   `-- tcsh.nobuiltincolorls.diff.gz

+    |   |-- time

+    |   |   |-- slack-desc

+    |   |   |-- time-1.7.tar.gz

+    |   |   `-- time.SlackBuild

+    |   |-- tree

+    |   |   |-- slack-desc

+    |   |   |-- tree-1.6.0.tar.bz2

+    |   |   `-- tree.SlackBuild

+    |   |-- udev

+    |   |   |-- config

+    |   |   |   |-- modprobe.d

+    |   |   |   |   |-- 8139cp.conf

+    |   |   |   |   |-- README

+    |   |   |   |   |-- bcm43xx.conf

+    |   |   |   |   |-- eepro100.conf

+    |   |   |   |   |-- eth1394.conf

+    |   |   |   |   |-- evbug.conf

+    |   |   |   |   |-- framebuffers.conf

+    |   |   |   |   |-- hostap.conf

+    |   |   |   |   |-- hw_random.conf

+    |   |   |   |   |-- isapnp.conf

+    |   |   |   |   |-- isdn.conf

+    |   |   |   |   |-- oss.conf

+    |   |   |   |   |-- pcspkr.conf

+    |   |   |   |   |-- psmouse.conf

+    |   |   |   |   |-- scsi-sata-controllers.conf

+    |   |   |   |   |-- sound-modems.conf

+    |   |   |   |   |-- tulip.conf

+    |   |   |   |   |-- usb-controller.conf

+    |   |   |   |   |-- via-ircc.conf

+    |   |   |   |   `-- watchdog.conf

+    |   |   |   |-- rc.d

+    |   |   |   |   `-- rc.udev.new

+    |   |   |   |-- rules.d

+    |   |   |   |   |-- 40-slackware.rules

+    |   |   |   |   |-- 59-non-libata-devices.rules

+    |   |   |   |   `-- 65-permissions.rules

+    |   |   |   `-- udev.conf

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fix-42-usb-hid-pm.rules.diff.gz

+    |   |   |-- rule_generator.diff.gz

+    |   |   |-- slack-desc

+    |   |   |-- udev-182.tar.xz

+    |   |   |-- udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz

+    |   |   |-- udev-fixed-devices.tar.gz

+    |   |   `-- udev.SlackBuild

+    |   |-- udisks

+    |   |   |-- slack-desc

+    |   |   |-- udisks-1.0.4.tar.xz

+    |   |   |-- udisks.SlackBuild

+    |   |   `-- udisks.url

+    |   |-- udisks2

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- udisks-1.98.0.tar.xz

+    |   |   `-- udisks2.SlackBuild

+    |   |-- unarj

+    |   |   |-- Makefile.gz

+    |   |   |-- slack-desc

+    |   |   |-- unarj.SlackBuild

+    |   |   `-- unarj265.tar.gz

+    |   |-- upower

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- upower-0.9.17.tar.xz

+    |   |   |-- upower.SlackBuild

+    |   |   `-- upower.url

+    |   |-- usb_modeswitch

+    |   |   |-- device_reference.txt.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- usb-modeswitch-1.2.4.tar.bz2

+    |   |   |-- usb-modeswitch-data-20120812.tar.bz2

+    |   |   `-- usb_modeswitch.SlackBuild

+    |   |-- usbutils

+    |   |   |-- slack-desc

+    |   |   |-- usbutils-006.tar.xz

+    |   |   |-- usbutils.SlackBuild

+    |   |   `-- usbutils.url

+    |   |-- utempter

+    |   |   |-- doinst.sh.gz

+    |   |   |-- libutempter-1.1.5.tar.bz2

+    |   |   |-- libutempter-1.1.5.tar.bz2.asc

+    |   |   |-- slack-desc

+    |   |   `-- utempter.SlackBuild

+    |   |-- util-linux

+    |   |   |-- 0001-mount-old-fix-encryption-usage.patch.gz

+    |   |   |-- 0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch.gz

+    |   |   |-- adjtimex_1.29-2.2.diff.gz

+    |   |   |-- adjtimex_1.29.orig.tar.gz

+    |   |   |-- bsdstrings.tar.gz

+    |   |   |-- column-fix_long_opts.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- net-tools-1.60.20120726git.tar.xz

+    |   |   |-- net-tools.config.h.gz

+    |   |   |-- scsi_ioctl.h

+    |   |   |-- setserial-2.17.tar.gz

+    |   |   |-- setserial-rc.serial.diff.gz

+    |   |   |-- setserial-undef_TIOCGHAYESESP.diff.gz

+    |   |   |-- slack-desc

+    |   |   |-- util-linux-2.21.2.tar.xz

+    |   |   |-- util-linux.SlackBuild

+    |   |   |-- util-linux.fdisk-no-solaris.diff.gz

+    |   |   |-- ziptool-1.4.0.tar.xz

+    |   |   `-- ziptool-fix_build.patch.gz

+    |   |-- which

+    |   |   |-- slack-desc

+    |   |   |-- which-2.20.tar.gz

+    |   |   |-- which-2.20.tar.gz.sig

+    |   |   `-- which.SlackBuild

+    |   |-- xfsprogs

+    |   |   |-- slack-desc

+    |   |   |-- xfsprogs-3.1.8.tar.xz

+    |   |   `-- xfsprogs.SlackBuild

+    |   |-- xz

+    |   |   |-- slack-desc

+    |   |   |-- xz-5.0.4.tar.bz2

+    |   |   |-- xz-5.0.4.tar.bz2.sig

+    |   |   `-- xz.SlackBuild

+    |   `-- zoo

+    |       |-- slack-desc

+    |       |-- zoo-2.10.tar.gz

+    |       |-- zoo.SlackBuild

+    |       `-- zoo_2.10-22.debian.tar.gz

+    |-- ap

+    |   |-- a2ps

+    |   |   |-- a2ps-4.14.tar.bz2

+    |   |   |-- a2ps.SlackBuild

+    |   |   |-- a2ps.a2ps_cfg.in.diff.gz

+    |   |   |-- a2ps.diff.gz

+    |   |   |-- psutils-1.17.tar.gz

+    |   |   |-- psutils.destdir.diff.gz

+    |   |   |-- psutils.diff.gz

+    |   |   `-- slack-desc

+    |   |-- acct

+    |   |   |-- acct-6.5.4.tar.xz

+    |   |   |-- acct.SlackBuild

+    |   |   |-- acct.logdir.fhs.diff.gz

+    |   |   `-- slack-desc

+    |   |-- alsa-utils

+    |   |   |-- alsa-utils-1.0.26.tar.xz

+    |   |   |-- alsa-utils.SlackBuild

+    |   |   |-- alsa-utils.alsaconf.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.alsa.gz

+    |   |   `-- slack-desc

+    |   |-- amp

+    |   |   |-- _amp.tar.gz

+    |   |   |-- amp-0.7.6.tar.gz

+    |   |   |-- amp-gcc34.diff.gz

+    |   |   |-- amp.SlackBuild

+    |   |   |-- license_excerpts

+    |   |   `-- slack-desc

+    |   |-- ash

+    |   |   |-- ash-0.4.0.tar.gz

+    |   |   |-- ash.SlackBuild

+    |   |   |-- patches

+    |   |   |   |-- ash-builtin.patch.gz

+    |   |   |   |-- ash-debian.patch.gz

+    |   |   |   |-- ash-echo.patch.gz

+    |   |   |   |-- ash-freebsd.patch.gz

+    |   |   |   |-- ash-getcwd.patch.gz

+    |   |   |   |-- ash-getopt.patch.gz

+    |   |   |   |-- ash-glob.patch.gz

+    |   |   |   |-- ash-hetio.patch.gz

+    |   |   |   |-- ash-jobs.patch.gz

+    |   |   |   |-- ash-kill.patch.gz

+    |   |   |   |-- ash-makefile.patch.gz

+    |   |   |   |-- ash-manpage.patch.gz

+    |   |   |   |-- ash-memout.patch.gz

+    |   |   |   |-- ash-misc.patch.gz

+    |   |   |   |-- ash-ppid.patch.gz

+    |   |   |   |-- ash-redir.patch.gz

+    |   |   |   |-- ash-setmode.patch.gz

+    |   |   |   |-- ash-sighup.patch.gz

+    |   |   |   |-- ash-syntax.patch.gz

+    |   |   |   |-- ash-test.patch.gz

+    |   |   |   `-- ash-times.patch.gz

+    |   |   `-- slack-desc

+    |   |-- at

+    |   |   |-- at-3.1.12.tar.xz

+    |   |   |-- at.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- aumix

+    |   |   |-- aumix-2.9.1.tar.xz

+    |   |   |-- aumix.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- bc

+    |   |   |-- bc-1.06.95.tar.bz2

+    |   |   |-- bc-1.06.95.tar.bz2.sig

+    |   |   |-- bc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- bpe

+    |   |   |-- bpe-2.01.00.tar.gz

+    |   |   |-- bpe.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cdparanoia

+    |   |   |-- cdparanoia-III-10.2.src.tar.gz

+    |   |   |-- cdparanoia-III-10.2_cdda_private.patch.gz

+    |   |   |-- cdparanoia.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cdrdao

+    |   |   |-- cdrdao-1.2.3-stat.patch.gz

+    |   |   |-- cdrdao-1.2.3.tar.xz

+    |   |   |-- cdrdao.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cdrtools

+    |   |   |-- cdrtools-3.01a08.tar.xz

+    |   |   |-- cdrtools.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- zisofs-tools-1.0.8.tar.bz2

+    |   |   `-- zisofs-tools-1.0.8.tar.bz2.sign

+    |   |-- dc3dd

+    |   |   |-- dc3dd-6.12.3.tar.xz

+    |   |   |-- dc3dd.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ddrescue

+    |   |   |-- ddrescue-1.16.tar.xz

+    |   |   |-- ddrescue.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- diffstat

+    |   |   |-- diffstat-1.53.tar.xz

+    |   |   |-- diffstat.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- diffutils

+    |   |   |-- diffutils-3.2.tar.xz

+    |   |   |-- diffutils-sdiff-no-waitpid.patch.gz

+    |   |   |-- diffutils.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- dmapi

+    |   |   |-- dmapi-2.2.10.tar.xz

+    |   |   |-- dmapi.SlackBuild

+    |   |   |-- dmapi.destdir.diff.gz

+    |   |   `-- slack-desc

+    |   |-- dmidecode

+    |   |   |-- dmidecode-2.11.tar.bz2

+    |   |   |-- dmidecode-2.11.tar.bz2.sig

+    |   |   |-- dmidecode.SlackBuild

+    |   |   |-- dmidecode.makefile.diff.gz

+    |   |   `-- slack-desc

+    |   |-- dvd+rw-tools

+    |   |   |-- dvd+rw-tools-7.1.tar.gz

+    |   |   |-- dvd+rw-tools.SlackBuild

+    |   |   |-- dvd+rw-tools.limits.h.diff.gz

+    |   |   |-- dvd+rw-tools.url

+    |   |   `-- slack-desc

+    |   |-- enscript

+    |   |   |-- enscript-1.6.5.2.tar.xz

+    |   |   |-- enscript.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- flac

+    |   |   |-- flac-1.2.1.tar.xz

+    |   |   |-- flac.SlackBuild

+    |   |   |-- flac.gcc45.diff.gz

+    |   |   |-- flac.man.diff.gz

+    |   |   `-- slack-desc

+    |   |-- foomatic-filters

+    |   |   |-- doinst.sh.gz

+    |   |   |-- foomatic-filters-4.0.12.tar.xz

+    |   |   |-- foomatic-filters.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ghostscript

+    |   |   |-- cidfmap.gz

+    |   |   |-- ghostscript-9.05.tar.xz

+    |   |   |-- ghostscript.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ghostscript-fonts-std

+    |   |   |-- doinst.sh.gz

+    |   |   |-- ghostscript-fonts-std-8.11.tar.bz2

+    |   |   |-- ghostscript-fonts-std.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gphoto2

+    |   |   |-- gphoto2-2.4.14.tar.xz

+    |   |   |-- gphoto2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- groff

+    |   |   |-- groff-1.21.tar.xz

+    |   |   |-- groff.SlackBuild

+    |   |   |-- groff.man.mdoc.local.gz

+    |   |   `-- slack-desc

+    |   |-- gutenprint

+    |   |   |-- gutenprint-5.2.9.tar.xz

+    |   |   |-- gutenprint.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- hplip

+    |   |   |-- doinst.sh.gz

+    |   |   |-- hplip-3.12.9.tar.xz

+    |   |   |-- hplip.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- htop

+    |   |   |-- htop-1.0.1.tar.xz

+    |   |   |-- htop.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ispell

+    |   |   |-- ispell-3.2.06.tar.gz

+    |   |   |-- ispell.SlackBuild

+    |   |   |-- ispell.diff.gz

+    |   |   `-- slack-desc

+    |   |-- jed

+    |   |   |-- jed-0.99-19.tar.bz2

+    |   |   |-- jed-0.99-19.tar.bz2.asc

+    |   |   |-- jed.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- joe

+    |   |   |-- joe-3.7.tar.xz

+    |   |   |-- joe.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- jove

+    |   |   |-- jove.SlackBuild

+    |   |   |-- jove.makefile.diff.gz

+    |   |   |-- jove4.16.0.73.tar.xz

+    |   |   `-- slack-desc

+    |   |-- ksh93

+    |   |   |-- CPL

+    |   |   |-- INIT.2010-06-21.tgz

+    |   |   |-- ast-ksh-locale.2010-02-02.tgz

+    |   |   |-- ast-ksh.2010-06-21.tgz

+    |   |   |-- ksh93.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libx86

+    |   |   |-- libx86-1.1.tar.gz

+    |   |   |-- libx86.SlackBuild

+    |   |   |-- libx86.info

+    |   |   |-- lrmi.c.diff.gz

+    |   |   `-- slack-desc

+    |   |-- linuxdoc-tools

+    |   |   |-- ChangeLog.txt

+    |   |   |-- arm

+    |   |   |   `-- build

+    |   |   |-- linuxdoc-tools.SlackBuild

+    |   |   |-- linuxdoc-tools.build

+    |   |   |-- postbuildfixes.sh

+    |   |   |-- slack-desc

+    |   |   |-- sources

+    |   |   |   |-- asciidoc-8.6.7.tar.xz

+    |   |   |   |-- docbook-dsssl-1.79.tar.xz

+    |   |   |   |-- docbook-dsssl-doc-1.79.tar.xz

+    |   |   |   |-- docbook-style-xsl-1.76.1-5.fc17.src.rpm

+    |   |   |   |-- docbook-utils-0.6.14-30.fc17.src.rpm

+    |   |   |   |-- docbook-xml-4.5.zip

+    |   |   |   |-- docbook_4.5.orig.tar.xz

+    |   |   |   |-- gnome-doc-utils-0.20.10.tar.xz

+    |   |   |   |-- gtk-doc-1.18.tar.xz

+    |   |   |   |-- libsgmls-perl_1.03ii-32.diff.xz

+    |   |   |   |-- libsgmls-perl_1.03ii.orig.tar.xz

+    |   |   |   |-- linuxdoc-tools-0.9.67-1.fc18.src.rpm

+    |   |   |   |-- openjade-1.3-getopts.pl.xz

+    |   |   |   |-- openjade-1.3.2-gcc46.patch.xz

+    |   |   |   |-- openjade-1.3.3-pre1.tar.xz

+    |   |   |   |-- opensp-1.5.2-14.fc17.src.rpm

+    |   |   |   |-- sgml-common-0.6.3-36.fc17.src.rpm

+    |   |   |   |-- source.download

+    |   |   |   `-- xmlto-0.0.25.tar.xz

+    |   |   `-- trackbuild.linuxdoc-tools

+    |   |-- lm_sensors

+    |   |   |-- lm_sensors-3.3.2.tar.bz2

+    |   |   |-- lm_sensors-3.3.2.tar.bz2.sig

+    |   |   |-- lm_sensors.SlackBuild

+    |   |   |-- lm_sensors.makefile.diff.gz

+    |   |   `-- slack-desc

+    |   |-- lsof

+    |   |   |-- lsof.SlackBuild

+    |   |   |-- lsof_4.83.tar.bz2

+    |   |   |-- lsof_4.83.tar.bz2.sig

+    |   |   `-- slack-desc

+    |   |-- lsscsi

+    |   |   |-- lsscsi-0.26.tar.xz

+    |   |   |-- lsscsi.SlackBuild

+    |   |   |-- lsscsi.url

+    |   |   `-- slack-desc

+    |   |-- lxc

+    |   |   |-- lxc-0.7.5.tar.xz

+    |   |   |-- lxc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- madplay

+    |   |   |-- madplay-0.15.2b-fix-segfault.patch.gz

+    |   |   |-- madplay-0.15.2b.tar.xz

+    |   |   |-- madplay.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- man

+    |   |   |-- doinst.sh.gz

+    |   |   |-- man-1.6f.nroff.mandoc.diff.gz

+    |   |   |-- man-1.6g.tar.xz

+    |   |   |-- man.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- man-pages

+    |   |   |-- doinst.sh.gz

+    |   |   |-- man-pages-3.41.tar.xz

+    |   |   |-- man-pages-posix-2003-a.tar.bz2

+    |   |   |-- man-pages.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- whatis.sample.xz

+    |   |-- mc

+    |   |   |-- mc-4.8.4.tar.xz

+    |   |   |-- mc.SlackBuild

+    |   |   |-- mc.image.sh.geeqie.diff.gz

+    |   |   |-- mc.save.file.diff.gz

+    |   |   |-- profile.d

+    |   |   |   |-- mc-wrapper.csh

+    |   |   |   |-- mc-wrapper.sh

+    |   |   |   |-- mc.csh

+    |   |   |   `-- mc.sh

+    |   |   `-- slack-desc

+    |   |-- moc

+    |   |   |-- moc-2.5.0-alpha4.tar.xz

+    |   |   |-- moc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- most

+    |   |   |-- most-5.0.0a.tar.bz2

+    |   |   |-- most.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mpg123

+    |   |   |-- mpg123-1.14.4.tar.xz

+    |   |   |-- mpg123.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mysql

+    |   |   |-- README.mysql-embedded

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mirror-url

+    |   |   |-- mysql-5.5.27.tar.xz

+    |   |   |-- mysql-embedded.SlackBuild

+    |   |   |-- mysql.SlackBuild

+    |   |   |-- rc.mysqld.gz

+    |   |   `-- slack-desc

+    |   |-- nano

+    |   |   |-- doinst.sh.gz

+    |   |   |-- nano-2.3.1.tar.xz

+    |   |   |-- nano.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- normalize

+    |   |   |-- normalize-0.7.7.tar.bz2

+    |   |   |-- normalize.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pm-utils

+    |   |   |-- 49bluetooth-generic

+    |   |   |-- README.SLACKWARE

+    |   |   |-- fix-wrong-path-in-intel-audio-powersave.patch.gz

+    |   |   |-- pm-quirks-20100619.tar.gz

+    |   |   |-- pm-utils-1.4.1.tar.gz

+    |   |   |-- pm-utils.SlackBuild

+    |   |   |-- pm-utils.url

+    |   |   |-- slack-desc

+    |   |   `-- use_more_sane_harddrive_defaults.patch.gz

+    |   |-- powertop

+    |   |   |-- powertop-2.1.tar.xz

+    |   |   |-- powertop.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- radeontool

+    |   |   |-- radeontool-1.6.1.tar.bz2

+    |   |   |-- radeontool.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rexima

+    |   |   |-- rexima-1.4.tar.gz

+    |   |   |-- rexima.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rpm

+    |   |   |-- Packages.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rpm-4.10.0.tar.xz

+    |   |   |-- rpm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rzip

+    |   |   |-- rzip-2.1.tar.gz

+    |   |   |-- rzip.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- sc

+    |   |   |-- _sc.tar.gz

+    |   |   |-- sc-7.16-3.diff.gz

+    |   |   |-- sc-7.16.lsm

+    |   |   |-- sc-7.16.tar.gz

+    |   |   |-- sc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- screen

+    |   |   |-- screen-4.0.3.tar.bz2

+    |   |   |-- screen.SlackBuild

+    |   |   |-- screen.d_termname.envterm.buffersizeincrease.diff.gz

+    |   |   `-- slack-desc

+    |   |-- seejpeg

+    |   |   |-- _seejpeg.tar.gz

+    |   |   |-- libjpeg-6a.tar.gz

+    |   |   |-- seejpeg-1.10.diff.gz

+    |   |   |-- seejpeg-1.10.lsm

+    |   |   |-- seejpeg-1.10.tgz

+    |   |   |-- seejpeg.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- slackpkg

+    |   |   `-- README

+    |   |-- soma

+    |   |   |-- slack-desc

+    |   |   |-- soma-2.8.5.tar.gz

+    |   |   |-- soma.SlackBuild

+    |   |   |-- soma.info

+    |   |   |-- soma.png

+    |   |   `-- stations.conf

+    |   |-- sox

+    |   |   |-- slack-desc

+    |   |   |-- sox-14.4.0.tar.xz

+    |   |   `-- sox.SlackBuild

+    |   |-- sqlite

+    |   |   |-- COPYRIGHT.gz

+    |   |   |-- slack-desc

+    |   |   |-- sqlite-src-3071300.tar.xz

+    |   |   `-- sqlite.SlackBuild

+    |   |-- sudo

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- sudo-1.8.5p2.tar.xz

+    |   |   `-- sudo.SlackBuild

+    |   |-- sysstat

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- sysstat-9.0.6.1.tar.bz2

+    |   |   `-- sysstat.SlackBuild

+    |   |-- texinfo

+    |   |   |-- dir.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- texinfo-4.13a.tar.bz2

+    |   |   `-- texinfo.SlackBuild

+    |   |-- vbetool

+    |   |   |-- slack-desc

+    |   |   |-- vbetool-1.1.tar.gz

+    |   |   |-- vbetool.SlackBuild

+    |   |   `-- vbetool.info

+    |   |-- vim

+    |   |   |-- ctags-5.8.tar.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gvim.desktop

+    |   |   |-- gvim.png

+    |   |   |-- patches

+    |   |   |   |-- 7.3.001.gz

+    |   |   |   |-- 7.3.002.gz

+    |   |   |   |-- 7.3.003.gz

+    |   |   |   |-- 7.3.004.gz

+    |   |   |   |-- 7.3.005.gz

+    |   |   |   |-- 7.3.006.gz

+    |   |   |   |-- 7.3.007.gz

+    |   |   |   |-- 7.3.008.gz

+    |   |   |   |-- 7.3.009.gz

+    |   |   |   |-- 7.3.010.gz

+    |   |   |   |-- 7.3.011.gz

+    |   |   |   |-- 7.3.012.gz

+    |   |   |   |-- 7.3.013.gz

+    |   |   |   |-- 7.3.014.gz

+    |   |   |   |-- 7.3.015.gz

+    |   |   |   |-- 7.3.016.gz

+    |   |   |   |-- 7.3.017.gz

+    |   |   |   |-- 7.3.018.gz

+    |   |   |   |-- 7.3.019.gz

+    |   |   |   |-- 7.3.020.gz

+    |   |   |   |-- 7.3.021.gz

+    |   |   |   |-- 7.3.022.gz

+    |   |   |   |-- 7.3.023.gz

+    |   |   |   |-- 7.3.024.gz

+    |   |   |   |-- 7.3.025.gz

+    |   |   |   |-- 7.3.026.gz

+    |   |   |   |-- 7.3.027.gz

+    |   |   |   |-- 7.3.028.gz

+    |   |   |   |-- 7.3.029.gz

+    |   |   |   |-- 7.3.030.gz

+    |   |   |   |-- 7.3.031.gz

+    |   |   |   |-- 7.3.032.gz

+    |   |   |   |-- 7.3.033.gz

+    |   |   |   |-- 7.3.034.gz

+    |   |   |   |-- 7.3.035.gz

+    |   |   |   |-- 7.3.036.gz

+    |   |   |   |-- 7.3.037.gz

+    |   |   |   |-- 7.3.038.gz

+    |   |   |   |-- 7.3.039.gz

+    |   |   |   |-- 7.3.040.gz

+    |   |   |   |-- 7.3.041.gz

+    |   |   |   |-- 7.3.042.gz

+    |   |   |   |-- 7.3.043.gz

+    |   |   |   |-- 7.3.044.gz

+    |   |   |   |-- 7.3.045.gz

+    |   |   |   |-- 7.3.046.gz

+    |   |   |   |-- 7.3.047.gz

+    |   |   |   |-- 7.3.048.gz

+    |   |   |   |-- 7.3.049.gz

+    |   |   |   |-- 7.3.050.gz

+    |   |   |   |-- 7.3.051.gz

+    |   |   |   |-- 7.3.052.gz

+    |   |   |   |-- 7.3.053.gz

+    |   |   |   |-- 7.3.054.gz

+    |   |   |   |-- 7.3.055.gz

+    |   |   |   |-- 7.3.056.gz

+    |   |   |   |-- 7.3.057.gz

+    |   |   |   |-- 7.3.058.gz

+    |   |   |   |-- 7.3.059.gz

+    |   |   |   |-- 7.3.060.gz

+    |   |   |   |-- 7.3.061.gz

+    |   |   |   |-- 7.3.062.gz

+    |   |   |   |-- 7.3.063.gz

+    |   |   |   |-- 7.3.064.gz

+    |   |   |   |-- 7.3.065.gz

+    |   |   |   |-- 7.3.066.gz

+    |   |   |   |-- 7.3.067.gz

+    |   |   |   |-- 7.3.068.gz

+    |   |   |   |-- 7.3.069.gz

+    |   |   |   |-- 7.3.070.gz

+    |   |   |   |-- 7.3.071.gz

+    |   |   |   |-- 7.3.072.gz

+    |   |   |   |-- 7.3.073.gz

+    |   |   |   |-- 7.3.074.gz

+    |   |   |   |-- 7.3.075.gz

+    |   |   |   |-- 7.3.076.gz

+    |   |   |   |-- 7.3.077.gz

+    |   |   |   |-- 7.3.078.gz

+    |   |   |   |-- 7.3.079.gz

+    |   |   |   |-- 7.3.080.gz

+    |   |   |   |-- 7.3.081.gz

+    |   |   |   |-- 7.3.082.gz

+    |   |   |   |-- 7.3.083.gz

+    |   |   |   |-- 7.3.084.gz

+    |   |   |   |-- 7.3.085.gz

+    |   |   |   |-- 7.3.086.gz

+    |   |   |   |-- 7.3.087.gz

+    |   |   |   |-- 7.3.088.gz

+    |   |   |   |-- 7.3.089.gz

+    |   |   |   |-- 7.3.090.gz

+    |   |   |   |-- 7.3.091.gz

+    |   |   |   |-- 7.3.092.gz

+    |   |   |   |-- 7.3.093.gz

+    |   |   |   |-- 7.3.094.gz

+    |   |   |   |-- 7.3.095.gz

+    |   |   |   |-- 7.3.096.gz

+    |   |   |   |-- 7.3.097.gz

+    |   |   |   |-- 7.3.098.gz

+    |   |   |   |-- 7.3.099.gz

+    |   |   |   |-- 7.3.100.gz

+    |   |   |   |-- 7.3.101.gz

+    |   |   |   |-- 7.3.102.gz

+    |   |   |   |-- 7.3.103.gz

+    |   |   |   |-- 7.3.104.gz

+    |   |   |   |-- 7.3.105.gz

+    |   |   |   |-- 7.3.106.gz

+    |   |   |   |-- 7.3.107.gz

+    |   |   |   |-- 7.3.108.gz

+    |   |   |   |-- 7.3.109.gz

+    |   |   |   |-- 7.3.110.gz

+    |   |   |   |-- 7.3.111.gz

+    |   |   |   |-- 7.3.112.gz

+    |   |   |   |-- 7.3.113.gz

+    |   |   |   |-- 7.3.114.gz

+    |   |   |   |-- 7.3.115.gz

+    |   |   |   |-- 7.3.116.gz

+    |   |   |   |-- 7.3.117.gz

+    |   |   |   |-- 7.3.118.gz

+    |   |   |   |-- 7.3.119.gz

+    |   |   |   |-- 7.3.120.gz

+    |   |   |   |-- 7.3.121.gz

+    |   |   |   |-- 7.3.122.gz

+    |   |   |   |-- 7.3.123.gz

+    |   |   |   |-- 7.3.124.gz

+    |   |   |   |-- 7.3.125.gz

+    |   |   |   |-- 7.3.126.gz

+    |   |   |   |-- 7.3.127.gz

+    |   |   |   |-- 7.3.128.gz

+    |   |   |   |-- 7.3.129.gz

+    |   |   |   |-- 7.3.130.gz

+    |   |   |   |-- 7.3.131.gz

+    |   |   |   |-- 7.3.132.gz

+    |   |   |   |-- 7.3.133.gz

+    |   |   |   |-- 7.3.134.gz

+    |   |   |   |-- 7.3.135.gz

+    |   |   |   |-- 7.3.136.gz

+    |   |   |   |-- 7.3.137.gz

+    |   |   |   |-- 7.3.138.gz

+    |   |   |   |-- 7.3.139.gz

+    |   |   |   |-- 7.3.140.gz

+    |   |   |   |-- 7.3.141.gz

+    |   |   |   |-- 7.3.142.gz

+    |   |   |   |-- 7.3.143.gz

+    |   |   |   |-- 7.3.144.gz

+    |   |   |   |-- 7.3.145.gz

+    |   |   |   |-- 7.3.146.gz

+    |   |   |   |-- 7.3.147.gz

+    |   |   |   |-- 7.3.148.gz

+    |   |   |   |-- 7.3.149.gz

+    |   |   |   |-- 7.3.150.gz

+    |   |   |   |-- 7.3.151.gz

+    |   |   |   |-- 7.3.152.gz

+    |   |   |   |-- 7.3.153.gz

+    |   |   |   |-- 7.3.154.gz

+    |   |   |   |-- 7.3.155.gz

+    |   |   |   |-- 7.3.156.gz

+    |   |   |   |-- 7.3.157.gz

+    |   |   |   |-- 7.3.158.gz

+    |   |   |   |-- 7.3.159.gz

+    |   |   |   |-- 7.3.160.gz

+    |   |   |   |-- 7.3.161.gz

+    |   |   |   |-- 7.3.162.gz

+    |   |   |   |-- 7.3.163.gz

+    |   |   |   |-- 7.3.164.gz

+    |   |   |   |-- 7.3.165.gz

+    |   |   |   |-- 7.3.166.gz

+    |   |   |   |-- 7.3.167.gz

+    |   |   |   |-- 7.3.168.gz

+    |   |   |   |-- 7.3.169.gz

+    |   |   |   |-- 7.3.170.gz

+    |   |   |   |-- 7.3.171.gz

+    |   |   |   |-- 7.3.172.gz

+    |   |   |   |-- 7.3.173.gz

+    |   |   |   |-- 7.3.174.gz

+    |   |   |   |-- 7.3.175.gz

+    |   |   |   |-- 7.3.176.gz

+    |   |   |   |-- 7.3.177.gz

+    |   |   |   |-- 7.3.178.gz

+    |   |   |   |-- 7.3.179.gz

+    |   |   |   |-- 7.3.180.gz

+    |   |   |   |-- 7.3.181.gz

+    |   |   |   |-- 7.3.182.gz

+    |   |   |   |-- 7.3.183.gz

+    |   |   |   |-- 7.3.184.gz

+    |   |   |   |-- 7.3.185.gz

+    |   |   |   |-- 7.3.186.gz

+    |   |   |   |-- 7.3.187.gz

+    |   |   |   |-- 7.3.188.gz

+    |   |   |   |-- 7.3.189.gz

+    |   |   |   |-- 7.3.190.gz

+    |   |   |   |-- 7.3.191.gz

+    |   |   |   |-- 7.3.192.gz

+    |   |   |   |-- 7.3.193.gz

+    |   |   |   |-- 7.3.194.gz

+    |   |   |   |-- 7.3.195.gz

+    |   |   |   |-- 7.3.196.gz

+    |   |   |   |-- 7.3.197.gz

+    |   |   |   |-- 7.3.198.gz

+    |   |   |   |-- 7.3.199.gz

+    |   |   |   |-- 7.3.200.gz

+    |   |   |   |-- 7.3.201.gz

+    |   |   |   |-- 7.3.202.gz

+    |   |   |   |-- 7.3.203.gz

+    |   |   |   |-- 7.3.204.gz

+    |   |   |   |-- 7.3.205.gz

+    |   |   |   |-- 7.3.206.gz

+    |   |   |   |-- 7.3.207.gz

+    |   |   |   |-- 7.3.208.gz

+    |   |   |   |-- 7.3.209.gz

+    |   |   |   |-- 7.3.210.gz

+    |   |   |   |-- 7.3.211.gz

+    |   |   |   |-- 7.3.212.gz

+    |   |   |   |-- 7.3.213.gz

+    |   |   |   |-- 7.3.214.gz

+    |   |   |   |-- 7.3.215.gz

+    |   |   |   |-- 7.3.216.gz

+    |   |   |   |-- 7.3.217.gz

+    |   |   |   |-- 7.3.218.gz

+    |   |   |   |-- 7.3.219.gz

+    |   |   |   |-- 7.3.220.gz

+    |   |   |   |-- 7.3.221.gz

+    |   |   |   |-- 7.3.222.gz

+    |   |   |   |-- 7.3.223.gz

+    |   |   |   |-- 7.3.224.gz

+    |   |   |   |-- 7.3.225.gz

+    |   |   |   |-- 7.3.226.gz

+    |   |   |   |-- 7.3.227.gz

+    |   |   |   |-- 7.3.228.gz

+    |   |   |   |-- 7.3.229.gz

+    |   |   |   |-- 7.3.230.gz

+    |   |   |   |-- 7.3.231.gz

+    |   |   |   |-- 7.3.232.gz

+    |   |   |   |-- 7.3.233.gz

+    |   |   |   |-- 7.3.234.gz

+    |   |   |   |-- 7.3.235.gz

+    |   |   |   |-- 7.3.236.gz

+    |   |   |   |-- 7.3.237.gz

+    |   |   |   |-- 7.3.238.gz

+    |   |   |   |-- 7.3.239.gz

+    |   |   |   |-- 7.3.240.gz

+    |   |   |   |-- 7.3.241.gz

+    |   |   |   |-- 7.3.242.gz

+    |   |   |   |-- 7.3.243.gz

+    |   |   |   |-- 7.3.244.gz

+    |   |   |   |-- 7.3.245.gz

+    |   |   |   |-- 7.3.246.gz

+    |   |   |   |-- 7.3.247.gz

+    |   |   |   |-- 7.3.248.gz

+    |   |   |   |-- 7.3.249.gz

+    |   |   |   |-- 7.3.250.gz

+    |   |   |   |-- 7.3.251.gz

+    |   |   |   |-- 7.3.252.gz

+    |   |   |   |-- 7.3.253.gz

+    |   |   |   |-- 7.3.254.gz

+    |   |   |   |-- 7.3.255.gz

+    |   |   |   |-- 7.3.256.gz

+    |   |   |   |-- 7.3.257.gz

+    |   |   |   |-- 7.3.258.gz

+    |   |   |   |-- 7.3.259.gz

+    |   |   |   |-- 7.3.260.gz

+    |   |   |   |-- 7.3.261.gz

+    |   |   |   |-- 7.3.262.gz

+    |   |   |   |-- 7.3.263.gz

+    |   |   |   |-- 7.3.264.gz

+    |   |   |   |-- 7.3.265.gz

+    |   |   |   |-- 7.3.266.gz

+    |   |   |   |-- 7.3.267.gz

+    |   |   |   |-- 7.3.268.gz

+    |   |   |   |-- 7.3.269.gz

+    |   |   |   |-- 7.3.270.gz

+    |   |   |   |-- 7.3.271.gz

+    |   |   |   |-- 7.3.272.gz

+    |   |   |   |-- 7.3.273.gz

+    |   |   |   |-- 7.3.274.gz

+    |   |   |   |-- 7.3.275.gz

+    |   |   |   |-- 7.3.276.gz

+    |   |   |   |-- 7.3.277.gz

+    |   |   |   |-- 7.3.278.gz

+    |   |   |   |-- 7.3.279.gz

+    |   |   |   |-- 7.3.280.gz

+    |   |   |   |-- 7.3.281.gz

+    |   |   |   |-- 7.3.282.gz

+    |   |   |   |-- 7.3.283.gz

+    |   |   |   |-- 7.3.284.gz

+    |   |   |   |-- 7.3.285.gz

+    |   |   |   |-- 7.3.286.gz

+    |   |   |   |-- 7.3.287.gz

+    |   |   |   |-- 7.3.288.gz

+    |   |   |   |-- 7.3.289.gz

+    |   |   |   |-- 7.3.290.gz

+    |   |   |   |-- 7.3.291.gz

+    |   |   |   |-- 7.3.292.gz

+    |   |   |   |-- 7.3.293.gz

+    |   |   |   |-- 7.3.294.gz

+    |   |   |   |-- 7.3.295.gz

+    |   |   |   |-- 7.3.296.gz

+    |   |   |   |-- 7.3.297.gz

+    |   |   |   |-- 7.3.298.gz

+    |   |   |   |-- 7.3.299.gz

+    |   |   |   |-- 7.3.300.gz

+    |   |   |   |-- 7.3.301.gz

+    |   |   |   |-- 7.3.302.gz

+    |   |   |   |-- 7.3.303.gz

+    |   |   |   |-- 7.3.304.gz

+    |   |   |   |-- 7.3.305.gz

+    |   |   |   |-- 7.3.306.gz

+    |   |   |   |-- 7.3.307.gz

+    |   |   |   |-- 7.3.308.gz

+    |   |   |   |-- 7.3.309.gz

+    |   |   |   |-- 7.3.310.gz

+    |   |   |   |-- 7.3.311.gz

+    |   |   |   |-- 7.3.312.gz

+    |   |   |   |-- 7.3.313.gz

+    |   |   |   |-- 7.3.314.gz

+    |   |   |   |-- 7.3.315.gz

+    |   |   |   |-- 7.3.316.gz

+    |   |   |   |-- 7.3.317.gz

+    |   |   |   |-- 7.3.318.gz

+    |   |   |   |-- 7.3.319.gz

+    |   |   |   |-- 7.3.320.gz

+    |   |   |   |-- 7.3.321.gz

+    |   |   |   |-- 7.3.322.gz

+    |   |   |   |-- 7.3.323.gz

+    |   |   |   |-- 7.3.324.gz

+    |   |   |   |-- 7.3.325.gz

+    |   |   |   |-- 7.3.326.gz

+    |   |   |   |-- 7.3.327.gz

+    |   |   |   |-- 7.3.328.gz

+    |   |   |   |-- 7.3.329.gz

+    |   |   |   |-- 7.3.330.gz

+    |   |   |   |-- 7.3.331.gz

+    |   |   |   |-- 7.3.332.gz

+    |   |   |   |-- 7.3.333.gz

+    |   |   |   |-- 7.3.334.gz

+    |   |   |   |-- 7.3.335.gz

+    |   |   |   |-- 7.3.336.gz

+    |   |   |   |-- 7.3.337.gz

+    |   |   |   |-- 7.3.338.gz

+    |   |   |   |-- 7.3.339.gz

+    |   |   |   |-- 7.3.340.gz

+    |   |   |   |-- 7.3.341.gz

+    |   |   |   |-- 7.3.342.gz

+    |   |   |   |-- 7.3.343.gz

+    |   |   |   |-- 7.3.344.gz

+    |   |   |   |-- 7.3.345.gz

+    |   |   |   |-- 7.3.346.gz

+    |   |   |   |-- 7.3.347.gz

+    |   |   |   |-- 7.3.348.gz

+    |   |   |   |-- 7.3.349.gz

+    |   |   |   |-- 7.3.350.gz

+    |   |   |   |-- 7.3.351.gz

+    |   |   |   |-- 7.3.352.gz

+    |   |   |   |-- 7.3.353.gz

+    |   |   |   |-- 7.3.354.gz

+    |   |   |   |-- 7.3.355.gz

+    |   |   |   |-- 7.3.356.gz

+    |   |   |   |-- 7.3.357.gz

+    |   |   |   |-- 7.3.358.gz

+    |   |   |   |-- 7.3.359.gz

+    |   |   |   |-- 7.3.360.gz

+    |   |   |   |-- 7.3.361.gz

+    |   |   |   |-- 7.3.362.gz

+    |   |   |   |-- 7.3.363.gz

+    |   |   |   |-- 7.3.364.gz

+    |   |   |   |-- 7.3.365.gz

+    |   |   |   |-- 7.3.366.gz

+    |   |   |   |-- 7.3.367.gz

+    |   |   |   |-- 7.3.368.gz

+    |   |   |   |-- 7.3.369.gz

+    |   |   |   |-- 7.3.370.gz

+    |   |   |   |-- 7.3.371.gz

+    |   |   |   |-- 7.3.372.gz

+    |   |   |   |-- 7.3.373.gz

+    |   |   |   |-- 7.3.374.gz

+    |   |   |   |-- 7.3.375.gz

+    |   |   |   |-- 7.3.376.gz

+    |   |   |   |-- 7.3.377.gz

+    |   |   |   |-- 7.3.378.gz

+    |   |   |   |-- 7.3.379.gz

+    |   |   |   |-- 7.3.380.gz

+    |   |   |   |-- 7.3.381.gz

+    |   |   |   |-- 7.3.382.gz

+    |   |   |   |-- 7.3.383.gz

+    |   |   |   |-- 7.3.384.gz

+    |   |   |   |-- 7.3.385.gz

+    |   |   |   |-- 7.3.386.gz

+    |   |   |   |-- 7.3.387.gz

+    |   |   |   |-- 7.3.388.gz

+    |   |   |   |-- 7.3.389.gz

+    |   |   |   |-- 7.3.390.gz

+    |   |   |   |-- 7.3.391.gz

+    |   |   |   |-- 7.3.392.gz

+    |   |   |   |-- 7.3.393.gz

+    |   |   |   |-- 7.3.394.gz

+    |   |   |   |-- 7.3.395.gz

+    |   |   |   |-- 7.3.396.gz

+    |   |   |   |-- 7.3.397.gz

+    |   |   |   |-- 7.3.398.gz

+    |   |   |   |-- 7.3.399.gz

+    |   |   |   |-- 7.3.400.gz

+    |   |   |   |-- 7.3.401.gz

+    |   |   |   |-- 7.3.402.gz

+    |   |   |   |-- 7.3.403.gz

+    |   |   |   |-- 7.3.404.gz

+    |   |   |   |-- 7.3.405.gz

+    |   |   |   |-- 7.3.406.gz

+    |   |   |   |-- 7.3.407.gz

+    |   |   |   |-- 7.3.408.gz

+    |   |   |   |-- 7.3.409.gz

+    |   |   |   |-- 7.3.410.gz

+    |   |   |   |-- 7.3.411.gz

+    |   |   |   |-- 7.3.412.gz

+    |   |   |   |-- 7.3.413.gz

+    |   |   |   |-- 7.3.414.gz

+    |   |   |   |-- 7.3.415.gz

+    |   |   |   |-- 7.3.416.gz

+    |   |   |   |-- 7.3.417.gz

+    |   |   |   |-- 7.3.418.gz

+    |   |   |   |-- 7.3.419.gz

+    |   |   |   |-- 7.3.420.gz

+    |   |   |   |-- 7.3.421.gz

+    |   |   |   |-- 7.3.422.gz

+    |   |   |   |-- 7.3.423.gz

+    |   |   |   |-- 7.3.424.gz

+    |   |   |   |-- 7.3.425.gz

+    |   |   |   |-- 7.3.426.gz

+    |   |   |   |-- 7.3.427.gz

+    |   |   |   |-- 7.3.428.gz

+    |   |   |   |-- 7.3.429.gz

+    |   |   |   |-- 7.3.430.gz

+    |   |   |   |-- 7.3.431.gz

+    |   |   |   |-- 7.3.432.gz

+    |   |   |   |-- 7.3.433.gz

+    |   |   |   |-- 7.3.434.gz

+    |   |   |   |-- 7.3.435.gz

+    |   |   |   |-- 7.3.436.gz

+    |   |   |   |-- 7.3.437.gz

+    |   |   |   |-- 7.3.438.gz

+    |   |   |   |-- 7.3.439.gz

+    |   |   |   |-- 7.3.440.gz

+    |   |   |   |-- 7.3.441.gz

+    |   |   |   |-- 7.3.442.gz

+    |   |   |   |-- 7.3.443.gz

+    |   |   |   |-- 7.3.444.gz

+    |   |   |   |-- 7.3.445.gz

+    |   |   |   |-- 7.3.446.gz

+    |   |   |   |-- 7.3.447.gz

+    |   |   |   |-- 7.3.448.gz

+    |   |   |   |-- 7.3.449.gz

+    |   |   |   |-- 7.3.450.gz

+    |   |   |   |-- 7.3.451.gz

+    |   |   |   |-- 7.3.452.gz

+    |   |   |   |-- 7.3.453.gz

+    |   |   |   |-- 7.3.454.gz

+    |   |   |   |-- 7.3.455.gz

+    |   |   |   |-- 7.3.456.gz

+    |   |   |   |-- 7.3.457.gz

+    |   |   |   |-- 7.3.458.gz

+    |   |   |   |-- 7.3.459.gz

+    |   |   |   |-- 7.3.460.gz

+    |   |   |   |-- 7.3.461.gz

+    |   |   |   |-- 7.3.462.gz

+    |   |   |   |-- 7.3.463.gz

+    |   |   |   |-- 7.3.464.gz

+    |   |   |   |-- 7.3.465.gz

+    |   |   |   |-- 7.3.466.gz

+    |   |   |   |-- 7.3.467.gz

+    |   |   |   |-- 7.3.468.gz

+    |   |   |   |-- 7.3.469.gz

+    |   |   |   |-- 7.3.470.gz

+    |   |   |   |-- 7.3.471.gz

+    |   |   |   |-- 7.3.472.gz

+    |   |   |   |-- 7.3.473.gz

+    |   |   |   |-- 7.3.474.gz

+    |   |   |   |-- 7.3.475.gz

+    |   |   |   |-- 7.3.476.gz

+    |   |   |   |-- 7.3.477.gz

+    |   |   |   |-- 7.3.478.gz

+    |   |   |   |-- 7.3.479.gz

+    |   |   |   |-- 7.3.480.gz

+    |   |   |   |-- 7.3.481.gz

+    |   |   |   |-- 7.3.482.gz

+    |   |   |   |-- 7.3.483.gz

+    |   |   |   |-- 7.3.484.gz

+    |   |   |   |-- 7.3.485.gz

+    |   |   |   |-- 7.3.486.gz

+    |   |   |   |-- 7.3.487.gz

+    |   |   |   |-- 7.3.488.gz

+    |   |   |   |-- 7.3.489.gz

+    |   |   |   |-- 7.3.490.gz

+    |   |   |   |-- 7.3.491.gz

+    |   |   |   |-- 7.3.492.gz

+    |   |   |   |-- 7.3.493.gz

+    |   |   |   |-- 7.3.494.gz

+    |   |   |   |-- 7.3.495.gz

+    |   |   |   |-- 7.3.496.gz

+    |   |   |   |-- 7.3.497.gz

+    |   |   |   |-- 7.3.498.gz

+    |   |   |   |-- 7.3.499.gz

+    |   |   |   |-- 7.3.500.gz

+    |   |   |   |-- 7.3.501.gz

+    |   |   |   |-- 7.3.502.gz

+    |   |   |   |-- 7.3.503.gz

+    |   |   |   |-- 7.3.504.gz

+    |   |   |   |-- 7.3.505.gz

+    |   |   |   |-- 7.3.506.gz

+    |   |   |   |-- 7.3.507.gz

+    |   |   |   |-- 7.3.508.gz

+    |   |   |   |-- 7.3.509.gz

+    |   |   |   |-- 7.3.510.gz

+    |   |   |   |-- 7.3.511.gz

+    |   |   |   |-- 7.3.512.gz

+    |   |   |   |-- 7.3.513.gz

+    |   |   |   |-- 7.3.514.gz

+    |   |   |   |-- 7.3.515.gz

+    |   |   |   |-- 7.3.516.gz

+    |   |   |   |-- 7.3.517.gz

+    |   |   |   |-- 7.3.518.gz

+    |   |   |   |-- 7.3.519.gz

+    |   |   |   |-- 7.3.520.gz

+    |   |   |   |-- 7.3.521.gz

+    |   |   |   |-- 7.3.522.gz

+    |   |   |   |-- 7.3.523.gz

+    |   |   |   |-- 7.3.524.gz

+    |   |   |   |-- 7.3.525.gz

+    |   |   |   |-- 7.3.526.gz

+    |   |   |   |-- 7.3.527.gz

+    |   |   |   |-- 7.3.528.gz

+    |   |   |   |-- 7.3.529.gz

+    |   |   |   |-- 7.3.530.gz

+    |   |   |   |-- 7.3.531.gz

+    |   |   |   |-- 7.3.532.gz

+    |   |   |   |-- 7.3.533.gz

+    |   |   |   |-- 7.3.534.gz

+    |   |   |   |-- 7.3.535.gz

+    |   |   |   |-- 7.3.536.gz

+    |   |   |   |-- 7.3.537.gz

+    |   |   |   |-- 7.3.538.gz

+    |   |   |   |-- 7.3.539.gz

+    |   |   |   |-- 7.3.540.gz

+    |   |   |   |-- 7.3.541.gz

+    |   |   |   |-- 7.3.542.gz

+    |   |   |   |-- 7.3.543.gz

+    |   |   |   |-- 7.3.544.gz

+    |   |   |   |-- 7.3.545.gz

+    |   |   |   |-- 7.3.546.gz

+    |   |   |   |-- 7.3.547.gz

+    |   |   |   |-- 7.3.548.gz

+    |   |   |   |-- 7.3.549.gz

+    |   |   |   |-- 7.3.550.gz

+    |   |   |   |-- 7.3.551.gz

+    |   |   |   |-- 7.3.552.gz

+    |   |   |   |-- 7.3.553.gz

+    |   |   |   |-- 7.3.554.gz

+    |   |   |   |-- 7.3.555.gz

+    |   |   |   |-- 7.3.556.gz

+    |   |   |   |-- 7.3.557.gz

+    |   |   |   |-- 7.3.558.gz

+    |   |   |   |-- 7.3.559.gz

+    |   |   |   |-- 7.3.560.gz

+    |   |   |   |-- 7.3.561.gz

+    |   |   |   |-- 7.3.562.gz

+    |   |   |   |-- 7.3.563.gz

+    |   |   |   |-- 7.3.564.gz

+    |   |   |   |-- 7.3.565.gz

+    |   |   |   |-- 7.3.566.gz

+    |   |   |   |-- 7.3.567.gz

+    |   |   |   |-- 7.3.568.gz

+    |   |   |   |-- 7.3.569.gz

+    |   |   |   |-- 7.3.570.gz

+    |   |   |   |-- 7.3.571.gz

+    |   |   |   |-- 7.3.572.gz

+    |   |   |   |-- 7.3.573.gz

+    |   |   |   |-- 7.3.574.gz

+    |   |   |   |-- 7.3.575.gz

+    |   |   |   |-- 7.3.576.gz

+    |   |   |   |-- 7.3.577.gz

+    |   |   |   |-- 7.3.578.gz

+    |   |   |   |-- 7.3.579.gz

+    |   |   |   |-- 7.3.580.gz

+    |   |   |   |-- 7.3.581.gz

+    |   |   |   |-- 7.3.582.gz

+    |   |   |   |-- 7.3.583.gz

+    |   |   |   |-- 7.3.584.gz

+    |   |   |   |-- 7.3.585.gz

+    |   |   |   |-- 7.3.586.gz

+    |   |   |   |-- 7.3.587.gz

+    |   |   |   |-- 7.3.588.gz

+    |   |   |   |-- 7.3.589.gz

+    |   |   |   |-- 7.3.590.gz

+    |   |   |   |-- 7.3.591.gz

+    |   |   |   |-- 7.3.592.gz

+    |   |   |   |-- 7.3.593.gz

+    |   |   |   |-- 7.3.594.gz

+    |   |   |   |-- 7.3.595.gz

+    |   |   |   |-- 7.3.596.gz

+    |   |   |   |-- 7.3.597.gz

+    |   |   |   |-- 7.3.598.gz

+    |   |   |   |-- 7.3.599.gz

+    |   |   |   |-- 7.3.600.gz

+    |   |   |   |-- 7.3.601.gz

+    |   |   |   |-- 7.3.602.gz

+    |   |   |   |-- 7.3.603.gz

+    |   |   |   |-- 7.3.604.gz

+    |   |   |   |-- 7.3.605.gz

+    |   |   |   |-- 7.3.606.gz

+    |   |   |   |-- 7.3.607.gz

+    |   |   |   |-- 7.3.608.gz

+    |   |   |   |-- 7.3.609.gz

+    |   |   |   |-- 7.3.610.gz

+    |   |   |   |-- 7.3.611.gz

+    |   |   |   |-- 7.3.612.gz

+    |   |   |   |-- 7.3.613.gz

+    |   |   |   |-- 7.3.614.gz

+    |   |   |   |-- 7.3.615.gz

+    |   |   |   |-- 7.3.616.gz

+    |   |   |   |-- 7.3.617.gz

+    |   |   |   |-- 7.3.618.gz

+    |   |   |   |-- 7.3.619.gz

+    |   |   |   |-- 7.3.620.gz

+    |   |   |   |-- 7.3.621.gz

+    |   |   |   |-- 7.3.622.gz

+    |   |   |   |-- 7.3.623.gz

+    |   |   |   |-- 7.3.624.gz

+    |   |   |   |-- 7.3.625.gz

+    |   |   |   |-- 7.3.626.gz

+    |   |   |   |-- 7.3.627.gz

+    |   |   |   |-- 7.3.628.gz

+    |   |   |   |-- 7.3.629.gz

+    |   |   |   |-- 7.3.630.gz

+    |   |   |   |-- 7.3.631.gz

+    |   |   |   |-- 7.3.632.gz

+    |   |   |   |-- 7.3.633.gz

+    |   |   |   |-- 7.3.634.gz

+    |   |   |   |-- 7.3.635.gz

+    |   |   |   |-- 7.3.636.gz

+    |   |   |   |-- 7.3.637.gz

+    |   |   |   |-- 7.3.638.gz

+    |   |   |   |-- 7.3.639.gz

+    |   |   |   |-- 7.3.640.gz

+    |   |   |   |-- 7.3.641.gz

+    |   |   |   |-- 7.3.642.gz

+    |   |   |   |-- 7.3.643.gz

+    |   |   |   |-- 7.3.644.gz

+    |   |   |   `-- 7.3.645.gz

+    |   |   |-- slack-desc.vim

+    |   |   |-- slack-desc.vim-gvim

+    |   |   |-- vim-7.3.tar.xz

+    |   |   |-- vim-gvim.SlackBuild

+    |   |   |-- vim-runtime-syntax-20110328.diff.gz

+    |   |   |-- vim.SlackBuild

+    |   |   `-- vim.vimrc.diff.gz

+    |   |-- vorbis-tools

+    |   |   |-- slack-desc

+    |   |   |-- vorbis-tools-1.4.0.tar.xz

+    |   |   `-- vorbis-tools.SlackBuild

+    |   |-- workbone

+    |   |   |-- slack-desc

+    |   |   |-- workbone.1.diff.gz

+    |   |   |-- workbone.SlackBuild

+    |   |   |-- workbone_2.40-9.diff.gz

+    |   |   `-- workbone_2.40.orig.tar.gz

+    |   |-- xfsdump

+    |   |   |-- slack-desc

+    |   |   |-- xfsdump-3.0.4.tar.xz

+    |   |   |-- xfsdump.SlackBuild

+    |   |   `-- xfsdump.destdir.diff.gz

+    |   `-- zsh

+    |       |-- doinst.sh.gz

+    |       |-- slack-desc

+    |       |-- zsh-5.0.0-doc.tar.xz

+    |       |-- zsh-5.0.0.tar.xz

+    |       `-- zsh.SlackBuild

+    |-- d

+    |   |-- autoconf

+    |   |   |-- autoconf-2.69.tar.xz

+    |   |   |-- autoconf-2.69.tar.xz.sig

+    |   |   |-- autoconf.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- automake

+    |   |   |-- automake-1.11.5.tar.xz

+    |   |   |-- automake.SlackBuild

+    |   |   |-- automake.perl516.prototype.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- binutils

+    |   |   |-- binutils-2.22.52.0.2.tar.sign

+    |   |   |-- binutils-2.22.52.0.2.tar.xz

+    |   |   |-- binutils.SlackBuild

+    |   |   |-- release.binutils-2.22.52.0.2

+    |   |   `-- slack-desc

+    |   |-- bison

+    |   |   |-- bison-2.5.1.tar.xz

+    |   |   |-- bison.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ccache

+    |   |   |-- ccache-3.1.8.tar.xz

+    |   |   |-- ccache-3.1.8.tar.xz.asc

+    |   |   |-- ccache.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- clisp

+    |   |   |-- clisp-2.49.tar.bz2

+    |   |   |-- clisp-2.49.tar.bz2.sig

+    |   |   |-- clisp.SlackBuild

+    |   |   |-- ffcall-20080704cvs.tar.bz2

+    |   |   |-- libsigsegv-2.8.tar.xz

+    |   |   |-- slack-desc

+    |   |   `-- source.download

+    |   |-- cmake

+    |   |   |-- cmake-2.8.8.tar.xz

+    |   |   |-- cmake.SlackBuild

+    |   |   |-- cmake.findpkgconfig.3ea850.patch.gz

+    |   |   `-- slack-desc

+    |   |-- cscope

+    |   |   |-- cscope-15.7a.tar.bz2

+    |   |   |-- cscope.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cvs

+    |   |   |-- cvs-1.11.23.tar.bz2

+    |   |   |-- cvs-1.11.23.tar.bz2.sig

+    |   |   |-- cvs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- dev86

+    |   |   |-- Dev86src-0.16.17.tar.gz

+    |   |   |-- README

+    |   |   |-- dev86-x86_64.noelks.patch.gz

+    |   |   |-- dev86-x86_64.patch.gz

+    |   |   |-- dev86.SlackBuild

+    |   |   |-- dev86.info

+    |   |   `-- slack-desc

+    |   |-- distcc

+    |   |   |-- distcc-2.18.3.tar.bz2

+    |   |   |-- distcc-2.18.3.tar.bz2.asc

+    |   |   |-- distcc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- doxygen

+    |   |   |-- doxygen-1.8.1.1.src.tar.xz

+    |   |   |-- doxygen.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- flex

+    |   |   |-- flex-2.5.35.tar.bz2

+    |   |   |-- flex.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gcc

+    |   |   |-- antlr-runtime-3.4.jar

+    |   |   |-- create_gcj_jvm.sh

+    |   |   |-- ecj-4.5.jar

+    |   |   |-- ecj.sh

+    |   |   |-- fastjar-0.97.tar.xz

+    |   |   |-- fastjar-patches

+    |   |   |   |-- 1000-fastjar-0.97-segfault.patch.gz

+    |   |   |   |-- 1001-fastjar-0.97-len1.patch.gz

+    |   |   |   |-- 1002-fastjar-0.97-filename0.patch.gz

+    |   |   |   |-- 1003-fastjar-CVE-2010-0831.patch.gz

+    |   |   |   `-- 1004-fastjar-man.patch.gz

+    |   |   |-- gcc-4.7.1.adalib.pic.diff.gz

+    |   |   |-- gcc-4.7.1.tar.xz

+    |   |   |-- gcc-no_fixincludes.diff.gz

+    |   |   |-- gcc.SlackBuild

+    |   |   |-- slack-desc.gcc

+    |   |   |-- slack-desc.gcc-g++

+    |   |   |-- slack-desc.gcc-gfortran

+    |   |   |-- slack-desc.gcc-gnat

+    |   |   |-- slack-desc.gcc-go

+    |   |   |-- slack-desc.gcc-java

+    |   |   `-- slack-desc.gcc-objc

+    |   |-- gdb

+    |   |   |-- gdb-7.5.tar.xz

+    |   |   |-- gdb.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gettext-tools -> ../a/gettext

+    |   |-- git

+    |   |   |-- git-1.7.12.1.tar.xz

+    |   |   |-- git.SlackBuild

+    |   |   |-- git.url

+    |   |   `-- slack-desc

+    |   |-- gperf

+    |   |   |-- gperf-3.0.4.tar.xz

+    |   |   |-- gperf.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- guile

+    |   |   |-- guile-1.8.8.tar.xz

+    |   |   |-- guile.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- indent

+    |   |   |-- indent-2.2.10.tar.bz2

+    |   |   |-- indent.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- intltool

+    |   |   |-- intltool-0.50.2.tar.xz

+    |   |   |-- intltool.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- kernel-headers

+    |   |   `-- slack-desc

+    |   |-- libtool

+    |   |   |-- doinst.sh.gz

+    |   |   |-- libtool-2.4.2.tar.xz

+    |   |   |-- libtool-2.4.2.tar.xz.sig

+    |   |   |-- libtool.SlackBuild

+    |   |   |-- libtool.no.moved.warning.diff.gz

+    |   |   `-- slack-desc

+    |   |-- llvm

+    |   |   |-- clang-3.0.tar.xz

+    |   |   |-- llvm-3.0.tar.xz

+    |   |   |-- llvm.SlackBuild

+    |   |   |-- llvm.url

+    |   |   `-- slack-desc

+    |   |-- m4

+    |   |   |-- m4-1.4.16.tar.xz

+    |   |   |-- m4-1.4.16.tar.xz.sig

+    |   |   |-- m4.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- make

+    |   |   |-- make-3.82-android-build-fix.diff.gz

+    |   |   |-- make-3.82.tar.bz2

+    |   |   |-- make-3.82.tar.bz2.sig

+    |   |   |-- make.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mercurial

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mercurial-2.2.2.tar.xz

+    |   |   |-- mercurial.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- nasm

+    |   |   |-- nasm-2.10.04.tar.xz

+    |   |   |-- nasm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- oprofile

+    |   |   |-- oprofile-0.9.7.tar.xz

+    |   |   |-- oprofile.SlackBuild

+    |   |   |-- oprofile.binutils.diff.gz

+    |   |   `-- slack-desc

+    |   |-- p2c

+    |   |   |-- _p2c.tar.gz

+    |   |   |-- p2c-1.21alpha2.tar.gz

+    |   |   |-- p2c.SlackBuild

+    |   |   |-- p2c.examples.diff.gz

+    |   |   |-- p2c_1.21alpha2-2.1.diff.gz

+    |   |   |-- p2c_time.diff.gz

+    |   |   `-- slack-desc

+    |   |-- perl

+    |   |   |-- DBD-mysql-4.021.tar.gz

+    |   |   |-- DBI-1.622.tar.gz

+    |   |   |-- URI-1.60.tar.gz

+    |   |   |-- XML-Parser-2.41.tar.gz

+    |   |   |-- XML-Simple-2.20.tar.gz

+    |   |   |-- perl-5.16.1.tar.xz

+    |   |   |-- perl.SlackBuild

+    |   |   |-- perl.configure.multilib.patch.gz

+    |   |   `-- slack-desc

+    |   |-- pkg-config

+    |   |   |-- doinst.sh.gz

+    |   |   |-- pkg-config-0.25.tar.xz

+    |   |   |-- pkg-config.SlackBuild

+    |   |   |-- scripts

+    |   |   |   |-- pkgconfig.csh

+    |   |   |   `-- pkgconfig.sh

+    |   |   `-- slack-desc

+    |   |-- pmake

+    |   |   |-- pmake-1.111.tar.gz

+    |   |   |-- pmake.SlackBuild

+    |   |   |-- pmake.strerror.strdup.diff.gz

+    |   |   |-- pmake.txt.gz

+    |   |   |-- pmake_1.111-1.diff.gz

+    |   |   `-- slack-desc

+    |   |-- python

+    |   |   |-- Python-2.7.3.tar.xz

+    |   |   |-- python-2.7.3-docs-text.tar.bz2

+    |   |   |-- python.SlackBuild

+    |   |   |-- python.no-static-library.diff.gz

+    |   |   |-- python.readline.set_pre_input_hook.diff.gz

+    |   |   |-- python.x86_64.diff.gz

+    |   |   `-- slack-desc

+    |   |-- rcs

+    |   |   |-- _rcs.tar.gz

+    |   |   |-- rcs-5.7.diff.gz

+    |   |   |-- rcs-5.7.tar.gz

+    |   |   |-- rcs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ruby

+    |   |   |-- ruby-1.9.3-p194.tar.xz

+    |   |   |-- ruby.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- slacktrack

+    |   |   |-- OVERVIEW

+    |   |   |-- slacktrack-2.12-source.tar.xz

+    |   |   `-- slacktrack.SlackBuild

+    |   |-- strace

+    |   |   |-- slack-desc

+    |   |   |-- strace-4.5.20.tar.bz2

+    |   |   `-- strace.SlackBuild

+    |   |-- subversion

+    |   |   |-- get-svn-book.sh

+    |   |   |-- slack-desc

+    |   |   |-- subversion-1.7.6.tar.xz

+    |   |   |-- subversion.SlackBuild

+    |   |   `-- svn-book-html.tar.bz2

+    |   |-- swig

+    |   |   |-- slack-desc

+    |   |   |-- swig-2.0.6.tar.xz

+    |   |   |-- swig.SlackBuild

+    |   |   `-- swig.url

+    |   `-- yasm

+    |       |-- slack-desc

+    |       |-- yasm-1.2.0.tar.xz

+    |       `-- yasm.SlackBuild

+    |-- e

+    |   `-- emacs

+    |       |-- doinst.sh.gz

+    |       |-- emacs-24.2.tar.xz

+    |       |-- emacs.SlackBuild

+    |       `-- slack-desc

+    |-- f

+    |   |-- slack-desc.linux-faqs

+    |   `-- slack-desc.linux-howtos

+    |-- installer

+    |   |-- busybox-1.19.4.tar.bz2

+    |   |-- busybox-1.19.4.tar.bz2.sign

+    |   |-- busybox-dot-config

+    |   |-- busybox.2.6.32.2.diff.gz

+    |   |-- busybox.SlackBuild

+    |   |-- busybox.wget.P.diff.gz

+    |   |-- dhcpcd

+    |   |   |-- config.h.diff.gz

+    |   |   |-- dhcpcd-3.2.3.tar.bz2

+    |   |   `-- dhcpcd.sh.diff.gz

+    |   |-- dropbear

+    |   |   |-- doinst.sh

+    |   |   |-- dropbear-0.50.tar.bz2

+    |   |   |-- dropbear.Slackbuild

+    |   |   |-- dropbear.xauth.patch

+    |   |   |-- dropbear_dbclientpath.patch

+    |   |   |-- dropbear_emptypass.patch

+    |   |   |-- rc.dropbear.new

+    |   |   `-- slack-desc

+    |   `-- memtest86+-4.20.tar.xz

+    |-- k

+    |   |-- README.TXT

+    |   |-- config-x86

+    |   |   |-- config-generic-3.2.29

+    |   |   |-- config-generic-smp-3.2.29-smp

+    |   |   |-- config-huge-3.2.29

+    |   |   `-- config-huge-smp-3.2.29-smp

+    |   |-- config-x86_64

+    |   |   |-- config-generic-3.2.29.x64

+    |   |   `-- config-huge-3.2.29.x64

+    |   |-- linux-3.2.29.tar.sign

+    |   |-- linux-3.2.29.tar.xz

+    |   |-- packaging-x86

+    |   |   |-- kernel-generic

+    |   |   |   |-- kernel-generic.SlackBuild

+    |   |   |   `-- slack-desc

+    |   |   |-- kernel-generic-smp

+    |   |   |   |-- kernel-generic-smp.SlackBuild

+    |   |   |   `-- slack-desc

+    |   |   |-- kernel-huge

+    |   |   |   |-- kernel-huge.SlackBuild

+    |   |   |   `-- slack-desc

+    |   |   |-- kernel-huge-smp

+    |   |   |   |-- kernel-huge-smp.SlackBuild

+    |   |   |   `-- slack-desc

+    |   |   |-- kernel-modules

+    |   |   |   |-- kernel-modules.SlackBuild

+    |   |   |   |-- rc.modules.new

+    |   |   |   `-- slack-desc

+    |   |   `-- kernel-modules-smp

+    |   |       |-- kernel-modules-smp.SlackBuild

+    |   |       |-- rc.modules.new

+    |   |       `-- slack-desc

+    |   `-- packaging-x86_64

+    |       |-- kernel-generic

+    |       |   |-- kernel-generic.SlackBuild

+    |       |   `-- slack-desc

+    |       |-- kernel-huge

+    |       |   |-- kernel-huge.SlackBuild

+    |       |   `-- slack-desc

+    |       `-- kernel-modules

+    |           |-- kernel-modules.SlackBuild

+    |           |-- rc.modules.new

+    |           `-- slack-desc

+    |-- kde

+    |   |-- KDE.SlackBuild

+    |   |-- KDE.options

+    |   |-- build

+    |   |   `-- calligra

+    |   |-- cmake

+    |   |   |-- amarok

+    |   |   |-- analitza

+    |   |   |-- bluedevil

+    |   |   |-- calligra

+    |   |   |-- cmake

+    |   |   |-- k3b

+    |   |   |-- kdeaccessibility

+    |   |   |-- kdeadmin

+    |   |   |-- kdeartwork

+    |   |   |-- kdebase

+    |   |   |-- kdebindings

+    |   |   |-- kdelibs

+    |   |   |-- kdenetwork

+    |   |   |-- kdewebdev

+    |   |   |-- kwebkitpart

+    |   |   |-- networkmanagement

+    |   |   |-- perlkde

+    |   |   |-- perlqt

+    |   |   |-- polkit-kde-agent-1

+    |   |   `-- polkit-kde-kcmodules-1

+    |   |-- docs

+    |   |   |-- k3b

+    |   |   `-- kdepimlibs

+    |   |-- doinst.sh

+    |   |   |-- amarok

+    |   |   |-- blinken

+    |   |   |-- bluedevil

+    |   |   |-- cantor

+    |   |   |-- gwenview

+    |   |   |-- jovie

+    |   |   |-- k3b

+    |   |   |-- kalgebra

+    |   |   |-- kalzium

+    |   |   |-- kamera

+    |   |   |-- kanagram

+    |   |   |-- kate

+    |   |   |-- kaudiocreator

+    |   |   |-- kbruch

+    |   |   |-- kcalc

+    |   |   |-- kcolorchooser

+    |   |   |-- kde-applications

+    |   |   |-- kde-baseapps

+    |   |   |-- kde-runtime

+    |   |   |-- kde-workspace

+    |   |   |-- kdeaccessibility

+    |   |   |-- kdeadmin

+    |   |   |-- kdeartwork

+    |   |   |-- kdebase

+    |   |   |-- kdeedu

+    |   |   |-- kdegames

+    |   |   |-- kdegraphics

+    |   |   |-- kdelibs

+    |   |   |-- kdemultimedia

+    |   |   |-- kdenetwork

+    |   |   |-- kdepim

+    |   |   |-- kdepim-runtime

+    |   |   |-- kdeplasma-addons

+    |   |   |-- kdesdk

+    |   |   |-- kdetoys

+    |   |   |-- kdeutils

+    |   |   |-- kdevelop

+    |   |   |-- kdevplatform

+    |   |   |-- kdewebdev

+    |   |   |-- kdf

+    |   |   |-- kgamma

+    |   |   |-- kgeography

+    |   |   |-- khangman

+    |   |   |-- kig

+    |   |   |-- kiten

+    |   |   |-- klettres

+    |   |   |-- kmag

+    |   |   |-- kmousetool

+    |   |   |-- kmouth

+    |   |   |-- kmplot

+    |   |   |-- koffice

+    |   |   |-- kolourpaint

+    |   |   |-- konsole

+    |   |   |-- kopete-cryptography

+    |   |   |-- kruler

+    |   |   |-- ksaneplugin

+    |   |   |-- ksnapshot

+    |   |   |-- kstars

+    |   |   |-- ktorrent

+    |   |   |-- ktouch

+    |   |   |-- kturtle

+    |   |   |-- kwordquiz

+    |   |   |-- marble

+    |   |   |-- okular

+    |   |   |-- parley

+    |   |   |-- rocs

+    |   |   |-- skanlite

+    |   |   |-- step

+    |   |   `-- wicd-kde

+    |   |-- kde-deps-build

+    |   |   |-- PyQt -> ../../l/PyQt

+    |   |   |-- QScintilla -> ../../l/QScintilla

+    |   |   |-- akonadi -> ../../l/akonadi

+    |   |   |-- alldeps.SlackBuild

+    |   |   |-- attica -> ../../l/attica

+    |   |   |-- clucene -> ../../l/clucene

+    |   |   |-- ebook-tools -> ../../l/ebook-tools

+    |   |   |-- grantlee -> ../../l/grantlee

+    |   |   |-- herqq -> ../../l/herqq

+    |   |   |-- hunspell -> ../../l/hunspell

+    |   |   |-- lcms2 -> ../../l/lcms2

+    |   |   |-- libatasmart -> ../../l/libatasmart

+    |   |   |-- libbluedevil -> ../../l/libbluedevil

+    |   |   |-- libdbusmenu-qt -> ../../l/libdbusmenu-qt

+    |   |   |-- libmsn -> ../../l/libmsn

+    |   |   |-- libssh -> ../../l/libssh

+    |   |   |-- libvncserver -> ../../l/libvncserver

+    |   |   |-- phonon -> ../../l/phonon

+    |   |   |-- phonon-gstreamer -> ../../l/phonon-gstreamer

+    |   |   |-- phonon-mplayer -> ../../l/phonon-mplayer

+    |   |   |-- phonon-xine -> ../../l/phonon-xine

+    |   |   |-- polkit-qt-1 -> ../../l/polkit-qt-1

+    |   |   |-- qt -> ../../l/qt

+    |   |   |-- raptor2 -> ../../l/raptor2

+    |   |   |-- rasqal -> ../../l/rasqal

+    |   |   |-- redland -> ../../l/redland

+    |   |   |-- sg3_utils -> ../../l/sg3_utils

+    |   |   |-- shared-desktop-ontologies -> ../../l/shared-desktop-ontologies

+    |   |   |-- sip -> ../../l/sip

+    |   |   |-- soprano -> ../../l/soprano

+    |   |   |-- strigi -> ../../l/strigi

+    |   |   |-- system-config-printer -> ../../l/system-config-printer

+    |   |   |-- udisks -> ../../a/udisks

+    |   |   `-- upower -> ../../a/upower

+    |   |-- makepkg

+    |   |-- modularize

+    |   |-- modules

+    |   |   |-- extragear

+    |   |   |-- kdeaccessibility

+    |   |   |-- kdeadmin

+    |   |   |-- kdeartwork

+    |   |   |-- kdebase

+    |   |   |-- kdebindings

+    |   |   |-- kdeedu

+    |   |   |-- kdegames

+    |   |   |-- kdegraphics

+    |   |   |-- kdelibs

+    |   |   |-- kdemultimedia

+    |   |   |-- kdenetwork

+    |   |   |-- kdepim

+    |   |   |-- kdepimlibs

+    |   |   |-- kdeplasma-addons

+    |   |   |-- kdesdk

+    |   |   |-- kdetoys

+    |   |   |-- kdeutils

+    |   |   |-- kdewebdev

+    |   |   |-- oxygen-icons

+    |   |   `-- polkit-kde

+    |   |-- noarch

+    |   |-- package-blacklist

+    |   |-- patch

+    |   |   |-- README

+    |   |   |-- amarok

+    |   |   |   `-- amarok-liblastfm1.patch

+    |   |   |-- amarok.patch

+    |   |   |-- calligra

+    |   |   |   `-- calligra.words.fix_overflow.diff.gz

+    |   |   |-- calligra.patch

+    |   |   |-- kde-workspace

+    |   |   |   |-- kde-workspace.batteryapplet.diff.gz

+    |   |   |   `-- kde-workspace.kdm.server.timeout.diff.gz

+    |   |   |-- kde-workspace.patch

+    |   |   |-- kdelibs

+    |   |   |   |-- kdelibs.docbook.patch.gz

+    |   |   |   `-- kdelibs.upnp_conditional.patch

+    |   |   |-- kdelibs.patch

+    |   |   |-- kdepim

+    |   |   |   `-- kdepim-4.5.85-install-headers.patch

+    |   |   |-- kdepim.patch

+    |   |   |-- kdewebdev

+    |   |   |   `-- include-tidy.patch.gz

+    |   |   |-- kdewebdev.patch

+    |   |   |-- korundum

+    |   |   |   `-- korundum_ruby19.patch

+    |   |   `-- korundum.patch

+    |   |-- post-install

+    |   |   |-- k3b.post-install

+    |   |   |-- kde-baseapps

+    |   |   |   `-- profile.d

+    |   |   |       |-- kde.csh

+    |   |   |       `-- kde.sh

+    |   |   |-- kde-baseapps.post-install

+    |   |   |-- kde-runtime.post-install

+    |   |   |-- kde-workspace

+    |   |   |   |-- config

+    |   |   |   |   |-- Xsession

+    |   |   |   |   `-- Xsession.orig

+    |   |   |   `-- xinit

+    |   |   |       `-- xinitrc.kde

+    |   |   |-- kde-workspace.post-install

+    |   |   |-- kdelibs.post-install

+    |   |   |-- kdepim.post-install

+    |   |   |-- konsole.post-install

+    |   |   `-- wicd-kde.post-install

+    |   |-- pre-install

+    |   |   |-- README

+    |   |   |-- amarok.pre-install

+    |   |   |-- kdewebdev

+    |   |   |   `-- tidy

+    |   |   |       |-- get-tidy-cvs.sh

+    |   |   |       |-- tidy-20100503T2309.tar.xz

+    |   |   |       |-- tidy.SlackBuild

+    |   |   |       `-- tidy.build

+    |   |   `-- kdewebdev.pre-install

+    |   |-- slack-desc

+    |   |   |-- amarok

+    |   |   |-- analitza

+    |   |   |-- ark

+    |   |   |-- blinken

+    |   |   |-- bluedevil

+    |   |   |-- calligra

+    |   |   |-- cantor

+    |   |   |-- digikam

+    |   |   |-- filelight

+    |   |   |-- gwenview

+    |   |   |-- jovie

+    |   |   |-- k3b

+    |   |   |-- kaccessible

+    |   |   |-- kactivities

+    |   |   |-- kalgebra

+    |   |   |-- kalzium

+    |   |   |-- kamera

+    |   |   |-- kanagram

+    |   |   |-- kate

+    |   |   |-- kaudiocreator

+    |   |   |-- kbruch

+    |   |   |-- kcalc

+    |   |   |-- kcharselect

+    |   |   |-- kcolorchooser

+    |   |   |-- kde-base

+    |   |   |-- kde-base-artwork

+    |   |   |-- kde-baseapps

+    |   |   |-- kde-bindings

+    |   |   |-- kde-educational

+    |   |   |-- kde-runtime

+    |   |   |-- kde-wallpapers

+    |   |   |-- kde-workspace

+    |   |   |-- kdeaccessibility

+    |   |   |-- kdeadmin

+    |   |   |-- kdeartwork

+    |   |   |-- kdebase

+    |   |   |-- kdebase-runtime

+    |   |   |-- kdebase-workspace

+    |   |   |-- kdebindings

+    |   |   |-- kdeedu

+    |   |   |-- kdegames

+    |   |   |-- kdegraphics

+    |   |   |-- kdegraphics-mobipocket

+    |   |   |-- kdegraphics-strigi-analyzer

+    |   |   |-- kdegraphics-thumbnailers

+    |   |   |-- kdelibs

+    |   |   |-- kdemultimedia

+    |   |   |-- kdenetwork

+    |   |   |-- kdepim

+    |   |   |-- kdepim-runtime

+    |   |   |-- kdepimlibs

+    |   |   |-- kdeplasma-addons

+    |   |   |-- kdesdk

+    |   |   |-- kdetoys

+    |   |   |-- kdeutils

+    |   |   |-- kdevelop

+    |   |   |-- kdevelop-pg-qt

+    |   |   |-- kdevplatform

+    |   |   |-- kdewebdev

+    |   |   |-- kdf

+    |   |   |-- kfloppy

+    |   |   |-- kgamma

+    |   |   |-- kgeography

+    |   |   |-- kgpg

+    |   |   |-- khangman

+    |   |   |-- kig

+    |   |   |-- kimono

+    |   |   |-- kipi-plugins

+    |   |   |-- kiten

+    |   |   |-- klettres

+    |   |   |-- kmag

+    |   |   |-- kmousetool

+    |   |   |-- kmouth

+    |   |   |-- kmplot

+    |   |   |-- koffice

+    |   |   |-- kolourpaint

+    |   |   |-- konsole

+    |   |   |-- kopete-cryptography

+    |   |   |-- korundum

+    |   |   |-- kplayer

+    |   |   |-- kremotecontrol

+    |   |   |-- kross-interpreters

+    |   |   |-- kruler

+    |   |   |-- ksaneplugin

+    |   |   |-- ksecrets

+    |   |   |-- ksnapshot

+    |   |   |-- kstars

+    |   |   |-- ktimer

+    |   |   |-- ktorrent

+    |   |   |-- ktouch

+    |   |   |-- kturtle

+    |   |   |-- kwallet

+    |   |   |-- kwebkitpart

+    |   |   |-- kwordquiz

+    |   |   |-- libkdcraw

+    |   |   |-- libkdeedu

+    |   |   |-- libkexiv2

+    |   |   |-- libkipi

+    |   |   |-- libksane

+    |   |   |-- libktorrent

+    |   |   |-- marble

+    |   |   |-- networkmanagement

+    |   |   |-- okular

+    |   |   |-- oxygen-gtk2

+    |   |   |-- oxygen-icons

+    |   |   |-- parley

+    |   |   |-- perlkde

+    |   |   |-- perlqt

+    |   |   |-- polkit-kde-agent-1

+    |   |   |-- polkit-kde-kcmodules-1

+    |   |   |-- polkit-qt-1

+    |   |   |-- printer-applet

+    |   |   |-- prison

+    |   |   |-- pykde4

+    |   |   |-- qtruby

+    |   |   |-- quanta

+    |   |   |-- qyoto

+    |   |   |-- rocs

+    |   |   |-- skanlite

+    |   |   |-- smokegen

+    |   |   |-- smokekde

+    |   |   |-- smokeqt

+    |   |   |-- step

+    |   |   |-- strigi

+    |   |   |-- superkaramba

+    |   |   |-- svgpart

+    |   |   |-- sweeper

+    |   |   `-- wicd-kde

+    |   `-- src

+    |       |-- analitza-4.8.5.tar.xz

+    |       |-- ark-4.8.5.tar.xz

+    |       |-- blinken-4.8.5.tar.xz

+    |       |-- cantor-4.8.5.tar.xz

+    |       |-- extragear

+    |       |   |-- amarok-2.6.0.tar.xz

+    |       |   |-- bluedevil-1.2.3.tar.xz

+    |       |   |-- calligra-2.4.3.tar.xz

+    |       |   |-- k3b-2.0.2_20120226.git.tar.xz

+    |       |   |-- kaudiocreator-1.3.tar.xz

+    |       |   |-- kdevelop-4.3.1.tar.xz

+    |       |   |-- kdevelop-pg-qt-1.0.0.tar.xz

+    |       |   |-- kdevplatform-1.3.1.tar.xz

+    |       |   |-- kplayer-0.7.2.tar.xz

+    |       |   |-- ktorrent-4.2.1.tar.xz

+    |       |   |-- kwebkitpart-1.2.0_20111116git.tar.xz

+    |       |   |-- libktorrent-1.2.1_2.tar.xz

+    |       |   |-- networkmanagement-0.9.0.tar.xz

+    |       |   |-- oxygen-gtk2-1.3.0.tar.xz

+    |       |   |-- polkit-kde-agent-1-9d74ae3_20120104git.tar.xz

+    |       |   |-- polkit-kde-kcmodules-1-001bdf7_20120111git.tar.xz

+    |       |   |-- quanta-29a3f8e_20111223git.tar.xz

+    |       |   |-- skanlite-0.8.tar.xz

+    |       |   `-- wicd-kde-0.3.0_bcf27d8.tar.xz

+    |       |-- filelight-4.8.5.tar.xz

+    |       |-- gwenview-4.8.5.tar.xz

+    |       |-- jovie-4.8.5.tar.xz

+    |       |-- kaccessible-4.8.5.tar.xz

+    |       |-- kactivities-4.8.5.tar.xz

+    |       |-- kalgebra-4.8.5.tar.xz

+    |       |-- kalzium-4.8.5.tar.xz

+    |       |-- kamera-4.8.5.tar.xz

+    |       |-- kanagram-4.8.5.tar.xz

+    |       |-- kate-4.8.5.tar.xz

+    |       |-- kbruch-4.8.5.tar.xz

+    |       |-- kcalc-4.8.5.tar.xz

+    |       |-- kcharselect-4.8.5.tar.xz

+    |       |-- kcolorchooser-4.8.5.tar.xz

+    |       |-- kde-baseapps-4.8.5.tar.xz

+    |       |-- kde-runtime-4.8.5.tar.xz

+    |       |-- kde-wallpapers-4.8.5.tar.xz

+    |       |-- kde-workspace-4.8.5.tar.xz

+    |       |-- kdeadmin-4.8.5.tar.xz

+    |       |-- kdeartwork-4.8.5.tar.xz

+    |       |-- kdegames-4.8.5.tar.xz

+    |       |-- kdegraphics-mobipocket-4.8.5.tar.xz

+    |       |-- kdegraphics-strigi-analyzer-4.8.5.tar.xz

+    |       |-- kdegraphics-thumbnailers-4.8.5.tar.xz

+    |       |-- kdelibs-4.8.5.tar.xz

+    |       |-- kdemultimedia-4.8.5.tar.xz

+    |       |-- kdenetwork-4.8.5.tar.xz

+    |       |-- kdepim-4.8.5.tar.xz

+    |       |-- kdepim-runtime-4.8.5.tar.xz

+    |       |-- kdepimlibs-4.8.5.tar.xz

+    |       |-- kdeplasma-addons-4.8.5.tar.xz

+    |       |-- kdesdk-4.8.5.tar.xz

+    |       |-- kdetoys-4.8.5.tar.xz

+    |       |-- kdewebdev-4.8.5.tar.xz

+    |       |-- kdf-4.8.5.tar.xz

+    |       |-- kfloppy-4.8.5.tar.xz

+    |       |-- kgamma-4.8.5.tar.xz

+    |       |-- kgeography-4.8.5.tar.xz

+    |       |-- kgpg-4.8.5.tar.xz

+    |       |-- khangman-4.8.5.tar.xz

+    |       |-- kig-4.8.5.tar.xz

+    |       |-- kimono-4.8.5.tar.xz

+    |       |-- kiten-4.8.5.tar.xz

+    |       |-- klettres-4.8.5.tar.xz

+    |       |-- kmag-4.8.5.tar.xz

+    |       |-- kmousetool-4.8.5.tar.xz

+    |       |-- kmouth-4.8.5.tar.xz

+    |       |-- kmplot-4.8.5.tar.xz

+    |       |-- kolourpaint-4.8.5.tar.xz

+    |       |-- konsole-4.8.5.tar.xz

+    |       |-- korundum-4.8.5.tar.xz

+    |       |-- kremotecontrol-4.8.5.tar.xz

+    |       |-- kross-interpreters-4.8.5.tar.xz

+    |       |-- kruler-4.8.5.tar.xz

+    |       |-- ksaneplugin-4.8.5.tar.xz

+    |       |-- ksecrets-4.8.5.tar.xz

+    |       |-- ksnapshot-4.8.5.tar.xz

+    |       |-- kstars-4.8.5.tar.xz

+    |       |-- ktimer-4.8.5.tar.xz

+    |       |-- ktouch-4.8.5.tar.xz

+    |       |-- kturtle-4.8.5.tar.xz

+    |       |-- kwallet-4.8.5.tar.xz

+    |       |-- kwordquiz-4.8.5.tar.xz

+    |       |-- libkdcraw-4.8.5.tar.xz

+    |       |-- libkdeedu-4.8.5.tar.xz

+    |       |-- libkexiv2-4.8.5.tar.xz

+    |       |-- libkipi-4.8.5.tar.xz

+    |       |-- libksane-4.8.5.tar.xz

+    |       |-- marble-4.8.5.tar.xz

+    |       |-- okular-4.8.5.tar.xz

+    |       |-- oxygen-icons-4.8.5.tar.xz

+    |       |-- parley-4.8.5.tar.xz

+    |       |-- perlkde-4.8.5.tar.xz

+    |       |-- perlqt-4.8.5.tar.xz

+    |       |-- printer-applet-4.8.5.tar.xz

+    |       |-- pykde4-4.8.5.tar.xz

+    |       |-- qtruby-4.8.5.tar.xz

+    |       |-- qyoto-4.8.5.tar.xz

+    |       |-- rocs-4.8.5.tar.xz

+    |       |-- smokegen-4.8.5.tar.xz

+    |       |-- smokekde-4.8.5.tar.xz

+    |       |-- smokeqt-4.8.5.tar.xz

+    |       |-- step-4.8.5.tar.xz

+    |       |-- superkaramba-4.8.5.tar.xz

+    |       |-- svgpart-4.8.5.tar.xz

+    |       `-- sweeper-4.8.5.tar.xz

+    |-- kdei

+    |   |-- calligra-l10n

+    |   |   |-- calligra-l10n-ca-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-ca@valencia-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-cs-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-da-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-de-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-el-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-en_GB-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-es-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-et-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-fi-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-fr-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-hu-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-it-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-ja-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-kk-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-nb-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-nds-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-nl-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-pl-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-pt-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-pt_BR-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-ru-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-sk-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-sv-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-uk-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-zh_CN-2.4.3.tar.xz

+    |   |   |-- calligra-l10n-zh_TW-2.4.3.tar.xz

+    |   |   |-- calligra-l10n.SlackBuild

+    |   |   |-- languages

+    |   |   `-- slack-desc

+    |   |       |-- slack-desc.calligra-l10n-af

+    |   |       |-- slack-desc.calligra-l10n-ar

+    |   |       |-- slack-desc.calligra-l10n-az

+    |   |       |-- slack-desc.calligra-l10n-bg

+    |   |       |-- slack-desc.calligra-l10n-br

+    |   |       |-- slack-desc.calligra-l10n-bs

+    |   |       |-- slack-desc.calligra-l10n-ca

+    |   |       |-- slack-desc.calligra-l10n-ca@valencia

+    |   |       |-- slack-desc.calligra-l10n-cs

+    |   |       |-- slack-desc.calligra-l10n-cy

+    |   |       |-- slack-desc.calligra-l10n-da

+    |   |       |-- slack-desc.calligra-l10n-de

+    |   |       |-- slack-desc.calligra-l10n-el

+    |   |       |-- slack-desc.calligra-l10n-en_GB

+    |   |       |-- slack-desc.calligra-l10n-eo

+    |   |       |-- slack-desc.calligra-l10n-es

+    |   |       |-- slack-desc.calligra-l10n-et

+    |   |       |-- slack-desc.calligra-l10n-eu

+    |   |       |-- slack-desc.calligra-l10n-fa

+    |   |       |-- slack-desc.calligra-l10n-fi

+    |   |       |-- slack-desc.calligra-l10n-fr

+    |   |       |-- slack-desc.calligra-l10n-fy

+    |   |       |-- slack-desc.calligra-l10n-ga

+    |   |       |-- slack-desc.calligra-l10n-gl

+    |   |       |-- slack-desc.calligra-l10n-he

+    |   |       |-- slack-desc.calligra-l10n-hi

+    |   |       |-- slack-desc.calligra-l10n-hne

+    |   |       |-- slack-desc.calligra-l10n-hsb

+    |   |       |-- slack-desc.calligra-l10n-hu

+    |   |       |-- slack-desc.calligra-l10n-is

+    |   |       |-- slack-desc.calligra-l10n-it

+    |   |       |-- slack-desc.calligra-l10n-ja

+    |   |       |-- slack-desc.calligra-l10n-kk

+    |   |       |-- slack-desc.calligra-l10n-km

+    |   |       |-- slack-desc.calligra-l10n-lo

+    |   |       |-- slack-desc.calligra-l10n-lt

+    |   |       |-- slack-desc.calligra-l10n-lv

+    |   |       |-- slack-desc.calligra-l10n-mk

+    |   |       |-- slack-desc.calligra-l10n-ms

+    |   |       |-- slack-desc.calligra-l10n-mt

+    |   |       |-- slack-desc.calligra-l10n-nb

+    |   |       |-- slack-desc.calligra-l10n-nds

+    |   |       |-- slack-desc.calligra-l10n-ne

+    |   |       |-- slack-desc.calligra-l10n-nl

+    |   |       |-- slack-desc.calligra-l10n-nn

+    |   |       |-- slack-desc.calligra-l10n-no

+    |   |       |-- slack-desc.calligra-l10n-no_NY

+    |   |       |-- slack-desc.calligra-l10n-pl

+    |   |       |-- slack-desc.calligra-l10n-pt

+    |   |       |-- slack-desc.calligra-l10n-pt_BR

+    |   |       |-- slack-desc.calligra-l10n-ro

+    |   |       |-- slack-desc.calligra-l10n-ru

+    |   |       |-- slack-desc.calligra-l10n-se

+    |   |       |-- slack-desc.calligra-l10n-sk

+    |   |       |-- slack-desc.calligra-l10n-sl

+    |   |       |-- slack-desc.calligra-l10n-sr

+    |   |       |-- slack-desc.calligra-l10n-sr@Latn

+    |   |       |-- slack-desc.calligra-l10n-sv

+    |   |       |-- slack-desc.calligra-l10n-ta

+    |   |       |-- slack-desc.calligra-l10n-tg

+    |   |       |-- slack-desc.calligra-l10n-th

+    |   |       |-- slack-desc.calligra-l10n-tr

+    |   |       |-- slack-desc.calligra-l10n-uk

+    |   |       |-- slack-desc.calligra-l10n-uz

+    |   |       |-- slack-desc.calligra-l10n-ven

+    |   |       |-- slack-desc.calligra-l10n-wa

+    |   |       |-- slack-desc.calligra-l10n-xh

+    |   |       |-- slack-desc.calligra-l10n-zh_CN

+    |   |       |-- slack-desc.calligra-l10n-zh_TW

+    |   |       `-- slack-desc.calligra-l10n-zu

+    |   `-- kde-l10n

+    |       |-- kde-l10n-ar-4.8.5.tar.xz

+    |       |-- kde-l10n-bg-4.8.5.tar.xz

+    |       |-- kde-l10n-bs-4.8.5.tar.xz

+    |       |-- kde-l10n-ca-4.8.5.tar.xz

+    |       |-- kde-l10n-ca@valencia-4.8.5.tar.xz

+    |       |-- kde-l10n-cs-4.8.5.tar.xz

+    |       |-- kde-l10n-da-4.8.5.tar.xz

+    |       |-- kde-l10n-de-4.8.5.tar.xz

+    |       |-- kde-l10n-el-4.8.5.tar.xz

+    |       |-- kde-l10n-en_GB-4.8.5.tar.xz

+    |       |-- kde-l10n-es-4.8.5.tar.xz

+    |       |-- kde-l10n-et-4.8.5.tar.xz

+    |       |-- kde-l10n-eu-4.8.5.tar.xz

+    |       |-- kde-l10n-fa-4.8.5.tar.xz

+    |       |-- kde-l10n-fi-4.8.5.tar.xz

+    |       |-- kde-l10n-fr-4.8.5.tar.xz

+    |       |-- kde-l10n-ga-4.8.5.tar.xz

+    |       |-- kde-l10n-gl-4.8.5.tar.xz

+    |       |-- kde-l10n-he-4.8.5.tar.xz

+    |       |-- kde-l10n-hr-4.8.5.tar.xz

+    |       |-- kde-l10n-hu-4.8.5.tar.xz

+    |       |-- kde-l10n-ia-4.8.5.tar.xz

+    |       |-- kde-l10n-id-4.8.5.tar.xz

+    |       |-- kde-l10n-is-4.8.5.tar.xz

+    |       |-- kde-l10n-it-4.8.5.tar.xz

+    |       |-- kde-l10n-ja-4.8.5.tar.xz

+    |       |-- kde-l10n-kk-4.8.5.tar.xz

+    |       |-- kde-l10n-km-4.8.5.tar.xz

+    |       |-- kde-l10n-ko-4.8.5.tar.xz

+    |       |-- kde-l10n-lt-4.8.5.tar.xz

+    |       |-- kde-l10n-lv-4.8.5.tar.xz

+    |       |-- kde-l10n-nb-4.8.5.tar.xz

+    |       |-- kde-l10n-nds-4.8.5.tar.xz

+    |       |-- kde-l10n-nl-4.8.5.tar.xz

+    |       |-- kde-l10n-nn-4.8.5.tar.xz

+    |       |-- kde-l10n-pa-4.8.5.tar.xz

+    |       |-- kde-l10n-pl-4.8.5.tar.xz

+    |       |-- kde-l10n-pt-4.8.5.tar.xz

+    |       |-- kde-l10n-pt_BR-4.8.5.tar.xz

+    |       |-- kde-l10n-ro-4.8.5.tar.xz

+    |       |-- kde-l10n-ru-4.8.5.tar.xz

+    |       |-- kde-l10n-si-4.8.5.tar.xz

+    |       |-- kde-l10n-sk-4.8.5.tar.xz

+    |       |-- kde-l10n-sl-4.8.5.tar.xz

+    |       |-- kde-l10n-sr-4.8.5.tar.xz

+    |       |-- kde-l10n-sv-4.8.5.tar.xz

+    |       |-- kde-l10n-tg-4.8.5.tar.xz

+    |       |-- kde-l10n-th-4.8.5.tar.xz

+    |       |-- kde-l10n-tr-4.8.5.tar.xz

+    |       |-- kde-l10n-ug-4.8.5.tar.xz

+    |       |-- kde-l10n-uk-4.8.5.tar.xz

+    |       |-- kde-l10n-vi-4.8.5.tar.xz

+    |       |-- kde-l10n-wa-4.8.5.tar.xz

+    |       |-- kde-l10n-zh_CN-4.8.5.tar.xz

+    |       |-- kde-l10n-zh_TW-4.8.5.tar.xz

+    |       |-- kde-l10n.SlackBuild

+    |       |-- kdepim-l10n

+    |       |   `-- extract-kdepim-goodness.sh

+    |       |-- languages

+    |       |-- local.options

+    |       `-- slack-desc

+    |           |-- slack-desc.kde-l10n-ar

+    |           |-- slack-desc.kde-l10n-bg

+    |           |-- slack-desc.kde-l10n-bn_IN

+    |           |-- slack-desc.kde-l10n-bs

+    |           |-- slack-desc.kde-l10n-ca

+    |           |-- slack-desc.kde-l10n-ca@valencia

+    |           |-- slack-desc.kde-l10n-cs

+    |           |-- slack-desc.kde-l10n-csb

+    |           |-- slack-desc.kde-l10n-da

+    |           |-- slack-desc.kde-l10n-de

+    |           |-- slack-desc.kde-l10n-el

+    |           |-- slack-desc.kde-l10n-en_GB

+    |           |-- slack-desc.kde-l10n-eo

+    |           |-- slack-desc.kde-l10n-es

+    |           |-- slack-desc.kde-l10n-et

+    |           |-- slack-desc.kde-l10n-eu

+    |           |-- slack-desc.kde-l10n-fa

+    |           |-- slack-desc.kde-l10n-fi

+    |           |-- slack-desc.kde-l10n-fr

+    |           |-- slack-desc.kde-l10n-fy

+    |           |-- slack-desc.kde-l10n-ga

+    |           |-- slack-desc.kde-l10n-gl

+    |           |-- slack-desc.kde-l10n-gu

+    |           |-- slack-desc.kde-l10n-he

+    |           |-- slack-desc.kde-l10n-hi

+    |           |-- slack-desc.kde-l10n-hne

+    |           |-- slack-desc.kde-l10n-hr

+    |           |-- slack-desc.kde-l10n-hu

+    |           |-- slack-desc.kde-l10n-ia

+    |           |-- slack-desc.kde-l10n-id

+    |           |-- slack-desc.kde-l10n-is

+    |           |-- slack-desc.kde-l10n-it

+    |           |-- slack-desc.kde-l10n-ja

+    |           |-- slack-desc.kde-l10n-kk

+    |           |-- slack-desc.kde-l10n-km

+    |           |-- slack-desc.kde-l10n-kn

+    |           |-- slack-desc.kde-l10n-ko

+    |           |-- slack-desc.kde-l10n-ku

+    |           |-- slack-desc.kde-l10n-lt

+    |           |-- slack-desc.kde-l10n-lv

+    |           |-- slack-desc.kde-l10n-mai

+    |           |-- slack-desc.kde-l10n-mk

+    |           |-- slack-desc.kde-l10n-ml

+    |           |-- slack-desc.kde-l10n-mr

+    |           |-- slack-desc.kde-l10n-nb

+    |           |-- slack-desc.kde-l10n-nds

+    |           |-- slack-desc.kde-l10n-nl

+    |           |-- slack-desc.kde-l10n-nn

+    |           |-- slack-desc.kde-l10n-pa

+    |           |-- slack-desc.kde-l10n-pl

+    |           |-- slack-desc.kde-l10n-pt

+    |           |-- slack-desc.kde-l10n-pt_BR

+    |           |-- slack-desc.kde-l10n-ro

+    |           |-- slack-desc.kde-l10n-ru

+    |           |-- slack-desc.kde-l10n-si

+    |           |-- slack-desc.kde-l10n-sk

+    |           |-- slack-desc.kde-l10n-sl

+    |           |-- slack-desc.kde-l10n-sr

+    |           |-- slack-desc.kde-l10n-sv

+    |           |-- slack-desc.kde-l10n-ta

+    |           |-- slack-desc.kde-l10n-tg

+    |           |-- slack-desc.kde-l10n-th

+    |           |-- slack-desc.kde-l10n-tr

+    |           |-- slack-desc.kde-l10n-ug

+    |           |-- slack-desc.kde-l10n-uk

+    |           |-- slack-desc.kde-l10n-vi

+    |           |-- slack-desc.kde-l10n-wa

+    |           |-- slack-desc.kde-l10n-zh_CN

+    |           `-- slack-desc.kde-l10n-zh_TW

+    |-- l

+    |   |-- ConsoleKit

+    |   |   |-- ConsoleKit-0.4.5.tar.xz

+    |   |   |-- ConsoleKit.SlackBuild

+    |   |   |-- ck-history-don-t-truncate-frequent-output-to-8-chars.patch.gz

+    |   |   |-- consolekit-0.2.10-cleanup_console_tags.patch.gz

+    |   |   |-- consolekit-0.4.2-revert.patch.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- pam-foreground-compat.ck

+    |   |   |-- rc.consolekit

+    |   |   `-- slack-desc

+    |   |-- GConf

+    |   |   |-- GConf-3.2.5.tar.xz

+    |   |   |-- GConf.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- M2Crypto

+    |   |   |-- M2Crypto-0.21.1.tar.xz

+    |   |   |-- M2Crypto.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- PyQt

+    |   |   |-- PyQt-x11-gpl-4.9.1.tar.xz

+    |   |   |-- PyQt.SlackBuild

+    |   |   |-- PyQt.phonon.diff.gz

+    |   |   `-- slack-desc

+    |   |-- QScintilla

+    |   |   |-- QScintilla-gpl-2.6.1.tar.xz

+    |   |   |-- QScintilla.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- aalib

+    |   |   |-- aalib-1.4rc5.tar.gz

+    |   |   |-- aalib.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- slack-desc.11line

+    |   |-- akonadi

+    |   |   |-- akonadi-1.7.2.tar.bz2

+    |   |   |-- akonadi.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- alsa-lib

+    |   |   |-- alsa-lib-1.0.26.tar.xz

+    |   |   |-- alsa-lib.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- alsa-oss

+    |   |   |-- alsa-oss-1.0.25.tar.xz

+    |   |   |-- alsa-oss.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- apr

+    |   |   |-- apr-1.4.6.tar.bz2

+    |   |   |-- apr-1.4.6.tar.bz2.asc

+    |   |   |-- apr.SlackBuild

+    |   |   |-- apr.url

+    |   |   `-- slack-desc

+    |   |-- apr-util

+    |   |   |-- apr-util-1.4.1.tar.bz2

+    |   |   |-- apr-util-1.4.1.tar.bz2.asc

+    |   |   |-- apr-util.SlackBuild

+    |   |   |-- apr-util.url

+    |   |   `-- slack-desc

+    |   |-- aspell

+    |   |   |-- aspell-0.60.6.tar.xz

+    |   |   |-- aspell.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- aspell-dict

+    |   |   |-- aspell-af-0.50-0.tar.bz2

+    |   |   |-- aspell-br-0.50-2.tar.bz2

+    |   |   |-- aspell-cy-0.50-3.tar.bz2

+    |   |   |-- aspell-dict.SlackBuild

+    |   |   |-- aspell-el-0.50-3.tar.bz2

+    |   |   |-- aspell-eo-0.50-2.tar.bz2

+    |   |   |-- aspell-es-0.50-2.tar.bz2

+    |   |   |-- aspell-fr-0.50-3.tar.bz2

+    |   |   |-- aspell-gl-0.50-0.tar.bz2

+    |   |   |-- aspell-gv-0.50-0.tar.bz2

+    |   |   |-- aspell-hr-0.51-0.tar.bz2

+    |   |   |-- aspell-ia-0.50-1.tar.bz2

+    |   |   |-- aspell-is-0.51.1-0.tar.bz2

+    |   |   |-- aspell-mi-0.50-0.tar.bz2

+    |   |   |-- aspell-mk-0.50-0.tar.bz2

+    |   |   |-- aspell-ms-0.50-0.tar.bz2

+    |   |   |-- aspell-mt-0.50-0.tar.bz2

+    |   |   |-- aspell-nb-0.50.1-0.tar.bz2

+    |   |   |-- aspell-nl-0.50-2.tar.bz2

+    |   |   |-- aspell-nn-0.50.1-1.tar.bz2

+    |   |   |-- aspell-no-0.50-2.tar.bz2

+    |   |   |-- aspell-pl-0.51-0.tar.bz2

+    |   |   |-- aspell-pt-0.50-2.tar.bz2

+    |   |   |-- aspell-ro-0.50-2.tar.bz2

+    |   |   |-- aspell-rw-0.50-0.tar.bz2

+    |   |   |-- aspell-sk-0.52-0.tar.bz2

+    |   |   |-- aspell-sl-0.50-0.tar.bz2

+    |   |   |-- aspell-sv-0.51-0.tar.bz2

+    |   |   |-- aspell-sw-0.50-0.tar.bz2

+    |   |   |-- aspell-tr-0.50-0.tar.bz2

+    |   |   |-- aspell-uk-0.51-0.tar.bz2

+    |   |   |-- aspell-wa-0.50-0.tar.bz2

+    |   |   |-- aspell-zu-0.50-0.tar.bz2

+    |   |   |-- aspell5-be-0.01.tar.bz2

+    |   |   |-- aspell5-bg-4.0-0.tar.bz2

+    |   |   |-- aspell5-da-1.4.42-1.tar.bz2

+    |   |   |-- aspell5-fo-0.2.16-1.tar.bz2

+    |   |   |-- aspell5-ga-3.6-0.tar.bz2

+    |   |   |-- aspell5-gd-0.1.1-1.tar.bz2

+    |   |   |-- aspell5-hil-0.11-0.tar.bz2

+    |   |   |-- aspell5-id-1.2-0.tar.bz2

+    |   |   |-- aspell5-ku-0.12-0.tar.bz2

+    |   |   |-- aspell5-mg-0.03-0.tar.bz2

+    |   |   |-- aspell5-ny-0.01-0.tar.bz2

+    |   |   |-- aspell5-sc-1.0.tar.bz2

+    |   |   |-- aspell5-tet-0.1.1.tar.bz2

+    |   |   |-- aspell5-tl-0.02-1.tar.bz2

+    |   |   |-- aspell5-tn-1.0.1-0.tar.bz2

+    |   |   |-- aspell6-am-0.03-1.tar.bz2

+    |   |   |-- aspell6-az-0.02-0.tar.bz2

+    |   |   |-- aspell6-bn-0.01.1-1.tar.bz2

+    |   |   |-- aspell6-ca-20040130-1.tar.bz2

+    |   |   |-- aspell6-cs-20040614-1.tar.bz2

+    |   |   |-- aspell6-csb-0.02-0.tar.bz2

+    |   |   |-- aspell6-de-20030222-1.tar.bz2

+    |   |   |-- aspell6-en-6.0-0.tar.bz2

+    |   |   |-- aspell6-et-0.1.21-1.tar.bz2

+    |   |   |-- aspell6-fa-0.02-0.tar.bz2

+    |   |   |-- aspell6-fi-0.7-0.tar.bz2

+    |   |   |-- aspell6-gu-0.02-0.tar.bz2

+    |   |   |-- aspell6-he-1.0-0.tar.bz2

+    |   |   |-- aspell6-hi-0.01-0.tar.bz2

+    |   |   |-- aspell6-hsb-0.01-1.tar.bz2

+    |   |   |-- aspell6-hu-0.99.4.2-0.tar.bz2

+    |   |   |-- aspell6-it-2.2_20050523-0.tar.bz2

+    |   |   |-- aspell6-la-20020503-0.tar.bz2

+    |   |   |-- aspell6-lt-1.1+cvs20060103-0.tar.bz2

+    |   |   |-- aspell6-lv-0.5.5-1.tar.bz2

+    |   |   |-- aspell6-mn-0.01-0.tar.bz2

+    |   |   |-- aspell6-mr-0.10-0.tar.bz2

+    |   |   |-- aspell6-nds-0.01-0.tar.bz2

+    |   |   |-- aspell6-or-0.03-1.tar.bz2

+    |   |   |-- aspell6-pa-0.01-1.tar.bz2

+    |   |   |-- aspell6-pt_BR-20080707-0.tar.bz2

+    |   |   |-- aspell6-qu-0.02-0.tar.bz2

+    |   |   |-- aspell6-ru-0.99f7-1.tar.bz2

+    |   |   |-- aspell6-sr-0.02.tar.bz2

+    |   |   |-- aspell6-ta-20040424-1.tar.bz2

+    |   |   |-- aspell6-te-0.01-2.tar.bz2

+    |   |   |-- aspell6-uk-1.1-0.tar.bz2

+    |   |   |-- aspell6-uz-0.5-0.tar.bz2

+    |   |   |-- aspell6-vi-0.01.1-1.tar.bz2

+    |   |   `-- aspell6-yi-0.01.1-1.tar.bz2

+    |   |-- atk

+    |   |   |-- atk-2.4.0.tar.xz

+    |   |   |-- atk.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- attica

+    |   |   |-- attica-0.4.0.tar.bz2

+    |   |   |-- attica.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- audiofile

+    |   |   |-- audiofile-0.2.7.tar.xz

+    |   |   |-- audiofile.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- automoc4

+    |   |   |-- automoc4-0.9.88.tar.bz2

+    |   |   |-- automoc4.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- babl

+    |   |   |-- babl-0.1.10.tar.xz

+    |   |   |-- babl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- boost

+    |   |   |-- boost.SlackBuild

+    |   |   |-- boost_1_49_0.tar.xz

+    |   |   `-- slack-desc

+    |   |-- cairo

+    |   |   |-- cairo-1.10.0-buggy_gradients.patch.gz

+    |   |   |-- cairo-1.10.2.tar.xz

+    |   |   |-- cairo.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- chmlib

+    |   |   |-- chmlib-0.40.tar.bz2

+    |   |   |-- chmlib.SlackBuild

+    |   |   |-- chmlib.info

+    |   |   `-- slack-desc

+    |   |-- clucene

+    |   |   |-- clucene-src-2.3.3.4.tar.xz

+    |   |   |-- clucene.SlackBuild

+    |   |   |-- clucene.pkgconfig.patch

+    |   |   `-- slack-desc

+    |   |-- db42

+    |   |   |-- db-4.2.52.tar.bz2

+    |   |   |-- db42.SlackBuild

+    |   |   |-- patch.4.2.52.1.gz

+    |   |   |-- patch.4.2.52.2.gz

+    |   |   |-- patch.4.2.52.3.gz

+    |   |   |-- patch.4.2.52.4.gz

+    |   |   `-- slack-desc

+    |   |-- db44

+    |   |   |-- db-4.4.20.tar.bz2

+    |   |   |-- db44.SlackBuild

+    |   |   |-- patch.4.4.20.1.gz

+    |   |   |-- patch.4.4.20.2.gz

+    |   |   `-- slack-desc

+    |   |-- db48

+    |   |   |-- db-4.8.30.tar.xz

+    |   |   |-- db48.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- dbus-glib

+    |   |   |-- dbus-glib-0.98.tar.xz

+    |   |   |-- dbus-glib.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- dbus-python

+    |   |   |-- dbus-python-1.1.0.tar.xz

+    |   |   |-- dbus-python.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- desktop-file-utils

+    |   |   |-- desktop-file-utils-0.20.tar.xz

+    |   |   |-- desktop-file-utils.SlackBuild

+    |   |   |-- desktop-file-utils.quiet.warnings.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- djvulibre

+    |   |   |-- djvulibre-3.5.25.3.tar.xz

+    |   |   |-- djvulibre.SlackBuild

+    |   |   |-- djvulibre.info

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- ebook-tools

+    |   |   |-- ebook-tools-0.2.1.tar.bz2

+    |   |   |-- ebook-tools.SlackBuild

+    |   |   |-- ebook-tools.paths.diff

+    |   |   `-- slack-desc

+    |   |-- eigen2

+    |   |   |-- eigen2-2.0.10.tar.xz

+    |   |   |-- eigen2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- enchant

+    |   |   |-- enchant-1.5.0.tar.xz

+    |   |   |-- enchant.SlackBuild

+    |   |   |-- enchant.info

+    |   |   `-- slack-desc

+    |   |-- esound

+    |   |   |-- doinst.sh.gz

+    |   |   |-- esound-0.2.41.tar.bz2

+    |   |   |-- esound.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- exiv2

+    |   |   |-- exiv2-0.23.tar.xz

+    |   |   |-- exiv2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- expat

+    |   |   |-- expat-2.0.1-fixes-3.patch.gz

+    |   |   |-- expat-2.0.1.tar.gz

+    |   |   |-- expat.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- fftw

+    |   |   |-- fftw-3.2.2.tar.xz

+    |   |   |-- fftw.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- freetype

+    |   |   |-- freetype-2.4.10.tar.xz

+    |   |   |-- freetype.SlackBuild

+    |   |   |-- freetype.illadvisederror.diff.gz

+    |   |   |-- freetype.subpixel.rendering.diff.gz

+    |   |   `-- slack-desc

+    |   |-- fribidi

+    |   |   |-- fribidi-0.19.2.tar.xz

+    |   |   |-- fribidi.SlackBuild

+    |   |   |-- fribidi.glib.h.diff.gz

+    |   |   `-- slack-desc

+    |   |-- fuse

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fuse-2.8.5.tar.xz

+    |   |   |-- fuse.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gamin

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fix-double-lock-in-inotify-helper-c.patch.gz

+    |   |   |-- gamin-0.1.10.tar.xz

+    |   |   |-- gamin.SlackBuild

+    |   |   |-- gaminrc.gz

+    |   |   |-- no_g_const_return.patch.gz

+    |   |   `-- slack-desc

+    |   |-- gcr

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gcr-3.4.1.tar.xz

+    |   |   |-- gcr.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gd

+    |   |   |-- gd-2.0.35.tar.bz2

+    |   |   |-- gd.SlackBuild

+    |   |   |-- gd.png14.diff.gz

+    |   |   |-- gdlib.pc

+    |   |   `-- slack-desc

+    |   |-- gdbm

+    |   |   |-- gdbm-1.8.3.tar.gz

+    |   |   |-- gdbm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gdk-pixbuf2

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gdk-pixbuf-2.26.1.tar.xz

+    |   |   |-- gdk-pixbuf.pnglz.diff.gz

+    |   |   |-- gdk-pixbuf2.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- update-gdk-pixbuf-loaders

+    |   |-- gegl

+    |   |   |-- gegl-0.2.0.tar.xz

+    |   |   |-- gegl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- giflib

+    |   |   |-- giflib-4.1.6.tar.xz

+    |   |   |-- giflib.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- glade3

+    |   |   |-- glade3-3.8.1.tar.xz

+    |   |   |-- glade3.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- glib

+    |   |   |-- glib-1.2.10.tar.bz2

+    |   |   |-- glib.SlackBuild

+    |   |   |-- glib1.2_1.2.10-17.diff.bz2

+    |   |   `-- slack-desc

+    |   |-- glib-networking

+    |   |   |-- doinst.sh.gz

+    |   |   |-- glib-networking-2.32.3.tar.xz

+    |   |   |-- glib-networking.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- glib2

+    |   |   |-- doinst.sh.gz

+    |   |   |-- glib-2.32.4.tar.xz

+    |   |   |-- glib2.SlackBuild

+    |   |   |-- libglib2.csh

+    |   |   |-- libglib2.sh

+    |   |   `-- slack-desc

+    |   |-- glibc

+    |   |   |-- doinst.sh-glibc

+    |   |   |-- doinst.sh-glibc-solibs

+    |   |   |-- doinst.sh-glibc-zoneinfo

+    |   |   |-- glibc-2.10-dns-no-gethostbyname4.diff.gz

+    |   |   |-- glibc-2.14-reexport-rpc-interface.patch.gz

+    |   |   |-- glibc-2.14-reinstall-nis-rpc-headers.patch.gz

+    |   |   |-- glibc-2.14.1-fixes-1.patch.gz

+    |   |   |-- glibc-2.15-revert-c5a0802a.diff.gz

+    |   |   |-- glibc-2.15.nscd-race-fix.diff.gz

+    |   |   |-- glibc-2.15.tar.xz

+    |   |   |-- glibc-2.15.tar.xz.sig

+    |   |   |-- glibc-cvs-checkout.sh

+    |   |   |-- glibc.SlackBuild

+    |   |   |-- glibc.disable.broken.optimized.memcpy.diff.gz

+    |   |   |-- glibc.getcwd.max.macro.diff.gz

+    |   |   |-- glibc.git-4a531bb0b3b582cb693de9f76d2d97d970f9a5d5.patch.gz

+    |   |   |-- glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff.gz

+    |   |   |-- glibc.git-96611391ad8823ba58405325d78cefeae5cdf699-CVE-2010-3847b.patch.gz

+    |   |   |-- glibc.ldd.trace.through.dynamic.linker.diff.gz

+    |   |   |-- glibc.locale.no-archive.diff.gz

+    |   |   |-- glibc.make-3.82.diff.gz

+    |   |   |-- glibc.nis-netgroups.diff.gz

+    |   |   |-- glibc.revert.to.fix.build.breakages.diff.gz

+    |   |   |-- glibc.ru_RU.CP1251.diff.gz

+    |   |   |-- glibc.strtod.CVE-2012-3480.diff.gz

+    |   |   |-- is_IS.diff.gz

+    |   |   |-- profile.d

+    |   |   |   |-- glibc.csh.new

+    |   |   |   `-- glibc.sh.new

+    |   |   |-- slack-desc.glibc

+    |   |   |-- slack-desc.glibc-debug

+    |   |   |-- slack-desc.glibc-i18n

+    |   |   |-- slack-desc.glibc-profile

+    |   |   |-- slack-desc.glibc-solibs

+    |   |   |-- slack-desc.glibc-solibs-linuxthreads

+    |   |   |-- slack-desc.glibc-zoneinfo

+    |   |   |-- slack-desc.glibc-zoneinfo.olson

+    |   |   |-- timezone-scripts

+    |   |   |   |-- output-updated-timeconfig.sh

+    |   |   |   |-- parts

+    |   |   |   |   |-- 00

+    |   |   |   |   |-- 01

+    |   |   |   |   |-- 02

+    |   |   |   |   |-- 03

+    |   |   |   |   |-- 04

+    |   |   |   |   `-- README

+    |   |   |   |-- setup.timeconfig

+    |   |   |   `-- timeconfig

+    |   |   |-- tzcode2012f.tar.gz

+    |   |   `-- tzdata2012f.tar.gz

+    |   |-- gmime

+    |   |   |-- gmime-2.4.15.tar.xz

+    |   |   |-- gmime.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gmm

+    |   |   |-- gmm-3.1.tar.bz2

+    |   |   |-- gmm.SlackBuild

+    |   |   |-- gmm.info

+    |   |   `-- slack-desc

+    |   |-- gmp

+    |   |   |-- gmp-5.0.5.tar.xz

+    |   |   |-- gmp-5.0.5.tar.xz.sig

+    |   |   |-- gmp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gnome-icon-theme

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gnome-icon-theme-3.4.0.tar.xz

+    |   |   |-- gnome-icon-theme-extras-3.4.0.tar.xz

+    |   |   |-- gnome-icon-theme-symbolic-3.4.0.tar.xz

+    |   |   |-- gnome-icon-theme.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gnome-keyring

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gnome-keyring-3.4.1.tar.xz

+    |   |   |-- gnome-keyring.SlackBuild

+    |   |   |-- gpg-agent-Hook-up-the-TTL-cache-option.patch.gz

+    |   |   |-- schema-Update-description-for-gpg-cache-method.patch.gz

+    |   |   |-- secret-store-Mark-a-secret-item-as-used-when-acces.patch.gz

+    |   |   `-- slack-desc

+    |   |-- gobject-introspection

+    |   |   |-- gobject-introspection-1.32.1.tar.xz

+    |   |   |-- gobject-introspection.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- grantlee

+    |   |   |-- grantlee-0.2.0.tar.xz

+    |   |   |-- grantlee.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gsettings-desktop-schemas

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gsettings-desktop-schemas-3.4.2.tar.xz

+    |   |   |-- gsettings-desktop-schemas.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gst-plugins-base

+    |   |   |-- gst-plugins-base-0.10.36.tar.xz

+    |   |   |-- gst-plugins-base.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gst-plugins-good

+    |   |   |-- gst-plugins-good-0.10.31.tar.xz

+    |   |   |-- gst-plugins-good.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gstreamer

+    |   |   |-- gstreamer-0.10.36.tar.xz

+    |   |   |-- gstreamer.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gtk+

+    |   |   |-- gtk+-1.2.10.tar.bz2

+    |   |   |-- gtk+.SlackBuild

+    |   |   |-- gtk+1.2_1.2.10-18.diff.bz2

+    |   |   `-- slack-desc

+    |   |-- gtk+2

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fix_build_issues_on_tutorial_and_faq.diff.gz

+    |   |   |-- gtk+-2.24.10.tar.xz

+    |   |   |-- gtk+-2.24.x.icon-compat.am.diff.gz

+    |   |   |-- gtk+-2.24.x.icon-compat.diff.gz

+    |   |   |-- gtk+2.SlackBuild

+    |   |   |-- gtk.xid.nowarningflood.diff.gz

+    |   |   |-- profile.d

+    |   |   |   |-- gtk+.csh

+    |   |   |   `-- gtk+.sh

+    |   |   |-- slack-desc

+    |   |   |-- update-gtk-immodules

+    |   |   |-- update-gtk-immodules-2.0

+    |   |   `-- use_host_triplet_for_gtk_immodules.diff.gz

+    |   |-- gtk+3

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gtk+-3.4.4.tar.xz

+    |   |   |-- gtk+3.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- update-gtk-immodules-3.0

+    |   |   `-- use_host_triplet_for_gtk_immodules.diff.gz

+    |   |-- gtkspell

+    |   |   |-- gtkspell-2.0.16.tar.xz

+    |   |   |-- gtkspell.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gvfs

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gvfs-1.12.3.tar.xz

+    |   |   |-- gvfs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- herqq

+    |   |   |-- herqq-1.0.0.zip

+    |   |   |-- herqq.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- hicolor-icon-theme

+    |   |   |-- doinst.sh.gz

+    |   |   |-- hicolor-icon-theme-0.12.tar.gz

+    |   |   |-- hicolor-icon-theme.SlackBuild

+    |   |   |-- setup.08.gtk-update-icon-cache

+    |   |   `-- slack-desc

+    |   |-- hunspell

+    |   |   |-- hunspell-1.3.2.tar.xz

+    |   |   |-- hunspell.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- icon-naming-utils

+    |   |   |-- icon-naming-utils-0.8.90.tar.gz

+    |   |   |-- icon-naming-utils.SlackBuild

+    |   |   |-- icon-naming-utils.pkgconfigdir.diff.gz

+    |   |   `-- slack-desc

+    |   |-- icu4c

+    |   |   |-- icu4c-49_1_2-src.tar.xz

+    |   |   |-- icu4c.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ilmbase

+    |   |   |-- ilmbase-1.0.2.tar.xz

+    |   |   |-- ilmbase.SlackBuild

+    |   |   |-- ilmbase.gcc4.diff.gz

+    |   |   |-- ilmbase.info

+    |   |   `-- slack-desc

+    |   |-- imlib

+    |   |   |-- imlib-1.9.15.tar.xz

+    |   |   |-- imlib.SlackBuild

+    |   |   |-- imlib.mitshm.render.diff.gz

+    |   |   `-- slack-desc

+    |   |-- iso-codes

+    |   |   |-- iso-codes-3.24.2.tar.bz2

+    |   |   |-- iso-codes-3.24.2.tar.bz2.sig

+    |   |   |-- iso-codes.SlackBuild

+    |   |   |-- iso-codes.info

+    |   |   `-- slack-desc

+    |   |-- jasper

+    |   |   |-- jasper-1.900.1.tar.bz2

+    |   |   |-- jasper.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- js185

+    |   |   |-- js185-1.0.0.tar.xz

+    |   |   |-- js185-destdir.patch

+    |   |   |-- js185.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- keybinder

+    |   |   |-- keybinder-0.3.0.tar.xz

+    |   |   |-- keybinder.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- keyutils

+    |   |   |-- keyutils-1.5.5.tar.bz2

+    |   |   |-- keyutils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- lcms

+    |   |   |-- lcms-1.19.tar.xz

+    |   |   |-- lcms.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- lcms2

+    |   |   |-- lcms2-2.3.tar.xz

+    |   |   |-- lcms2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- lesstif

+    |   |   |-- doinst.sh.gz

+    |   |   |-- lesstif-0.95.2.tar.xz

+    |   |   |-- lesstif.Makefile.in.patch.gz

+    |   |   |-- lesstif.PutPixel32.patch.gz

+    |   |   |-- lesstif.SlackBuild

+    |   |   |-- lesstif.rendertable.check.diff.gz

+    |   |   |-- lesstif.x86_64.patch.gz

+    |   |   `-- slack-desc

+    |   |-- libaio

+    |   |   |-- libaio-0.3.109.tar.bz2

+    |   |   |-- libaio-0.3.109.tar.sign

+    |   |   |-- libaio.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libao

+    |   |   |-- libao-1.1.0.tar.gz

+    |   |   |-- libao.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libarchive

+    |   |   |-- libarchive-2.8.5.tar.xz

+    |   |   |-- libarchive.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libart_lgpl

+    |   |   |-- libart_lgpl-2.3.21.tar.xz

+    |   |   |-- libart_lgpl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libatasmart

+    |   |   |-- README

+    |   |   |-- libatasmart-0.19.tar.xz

+    |   |   |-- libatasmart.SlackBuild

+    |   |   |-- libatasmart.info

+    |   |   `-- slack-desc

+    |   |-- libbluedevil

+    |   |   |-- libbluedevil-1.9.2.tar.bz2

+    |   |   |-- libbluedevil.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libcaca

+    |   |   |-- libcaca-0.99.beta18.tar.xz

+    |   |   |-- libcaca.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libcanberra

+    |   |   |-- libcanberra-0.29.tar.xz

+    |   |   |-- libcanberra.SlackBuild

+    |   |   |-- libcanberra.url

+    |   |   `-- slack-desc

+    |   |-- libcap

+    |   |   |-- README.SLACKWARE

+    |   |   |-- capfaq-0.2.txt

+    |   |   |-- libcap-2.22.tar.bz2

+    |   |   |-- libcap-2.22.tar.bz2.sign

+    |   |   |-- libcap.SlackBuild

+    |   |   |-- libcap.capability.h.fix.broken.includes.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libcddb

+    |   |   |-- libcddb-1.3.2.tar.xz

+    |   |   |-- libcddb.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libcdio

+    |   |   |-- libcdio-0.83.tar.xz

+    |   |   |-- libcdio.SlackBuild

+    |   |   |-- libcdio.url

+    |   |   `-- slack-desc

+    |   |-- libcroco

+    |   |   |-- libcroco-0.6.5.tar.xz

+    |   |   |-- libcroco.SlackBuild

+    |   |   |-- libcroco.url

+    |   |   `-- slack-desc

+    |   |-- libdbusmenu-qt

+    |   |   |-- libdbusmenu-qt-0.9.2.tar.bz2

+    |   |   |-- libdbusmenu-qt.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libdiscid

+    |   |   |-- libdiscid-0.2.2.tar.gz

+    |   |   |-- libdiscid.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libdvdread

+    |   |   |-- libdvdread-4.2.0.tar.bz2

+    |   |   |-- libdvdread.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libelf

+    |   |   |-- libelf-0.8.13.tar.xz

+    |   |   |-- libelf.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libexif

+    |   |   |-- libexif-0.6.21.tar.xz

+    |   |   |-- libexif.SlackBuild

+    |   |   |-- libexif.pc.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libffi

+    |   |   |-- libffi-3.0.11.tar.xz

+    |   |   |-- libffi.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libglade

+    |   |   |-- libglade-2.6.4.tar.bz2

+    |   |   |-- libglade.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgnome-keyring

+    |   |   |-- libgnome-keyring-3.4.1.tar.xz

+    |   |   |-- libgnome-keyring.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgphoto2

+    |   |   |-- fix-usb_id-callout-for-udev-175.diff.gz

+    |   |   |-- libgphoto2-2.4.14.tar.xz

+    |   |   |-- libgphoto2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgpod

+    |   |   |-- doinst.sh.gz

+    |   |   |-- libgpod-0.8.2.tar.xz

+    |   |   |-- libgpod.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgsf

+    |   |   |-- libgsf-1.14.20.tar.xz

+    |   |   |-- libgsf.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libical

+    |   |   |-- README

+    |   |   |-- libical-0.48.tar.xz

+    |   |   |-- libical.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libid3tag

+    |   |   |-- id3tag.pc

+    |   |   |-- libid3tag-0.15.1b.tar.gz

+    |   |   |-- libid3tag-0.15.1b.tar.gz.sign

+    |   |   |-- libid3tag.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libidl

+    |   |   |-- libIDL-0.8.14.tar.xz

+    |   |   |-- libidl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libidn

+    |   |   |-- libidn-1.25.tar.xz

+    |   |   |-- libidn.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libieee1284

+    |   |   |-- libieee1284-0.2.11.tar.bz2

+    |   |   |-- libieee1284.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libiodbc

+    |   |   |-- libiodbc-3.52.7.tar.xz

+    |   |   |-- libiodbc.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libjpeg

+    |   |   |-- jpegsrc.v8a.tar.xz

+    |   |   |-- libjpeg.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libkarma

+    |   |   |-- libkarma-0.1.1.tar.gz

+    |   |   |-- libkarma.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- liblastfm

+    |   |   |-- liblastfm-1.0.1.tar.gz

+    |   |   |-- liblastfm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libmad

+    |   |   |-- libmad-0.15.1b.tar.gz

+    |   |   |-- libmad-0.15.1b.tar.gz.sign

+    |   |   |-- libmad.SlackBuild

+    |   |   |-- mad.pc

+    |   |   `-- slack-desc

+    |   |-- libmcrypt

+    |   |   |-- libmcrypt-2.5.8.tar.bz2

+    |   |   |-- libmcrypt.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libmcs

+    |   |   |-- libmcs-0.7.2.tar.bz2

+    |   |   |-- libmcs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libmng

+    |   |   |-- libmng-1.0.10.tar.xz

+    |   |   |-- libmng.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libmowgli

+    |   |   |-- libmowgli-0.7.1.tar.bz2

+    |   |   |-- libmowgli.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libmpc

+    |   |   |-- libmpc.SlackBuild

+    |   |   |-- mpc-0.8.2.tar.xz

+    |   |   `-- slack-desc

+    |   |-- libmsn

+    |   |   |-- libmsn-4.2.1.tar.bz2

+    |   |   |-- libmsn.SlackBuild

+    |   |   |-- libmsn.gcc47.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libmtp

+    |   |   |-- libmtp-1.1.3.tar.xz

+    |   |   |-- libmtp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libnjb

+    |   |   |-- 80-libnjb.rules

+    |   |   |-- libnjb-2.2.6.tar.bz2

+    |   |   |-- libnjb.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libnl

+    |   |   |-- libnl-1.1.tar.bz2

+    |   |   |-- libnl-include_limits.h.patch.gz

+    |   |   |-- libnl.SlackBuild

+    |   |   |-- libnl.info

+    |   |   `-- slack-desc

+    |   |-- libnl3

+    |   |   |-- doinst.sh.gz

+    |   |   |-- libnl-3.2.11.tar.xz

+    |   |   |-- libnl3.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libnotify

+    |   |   |-- libnotify-0.7.5.tar.xz

+    |   |   |-- libnotify.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libogg

+    |   |   |-- libogg-1.3.0.tar.xz

+    |   |   |-- libogg.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- liboggz

+    |   |   |-- liboggz-1.1.1.tar.xz

+    |   |   |-- liboggz.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- liboil

+    |   |   |-- liboil-0.3.17.tar.xz

+    |   |   |-- liboil.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libpcap

+    |   |   |-- libpcap-1.3.0.tar.gz

+    |   |   |-- libpcap-1.3.0.tar.gz.sig

+    |   |   |-- libpcap.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libplist

+    |   |   |-- libplist-1.4.tar.bz2

+    |   |   |-- libplist.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libpng

+    |   |   |-- libpng-1.2.50.tar.xz

+    |   |   |-- libpng-1.4.12.tar.xz

+    |   |   |-- libpng.SlackBuild

+    |   |   |-- libpng.url

+    |   |   `-- slack-desc

+    |   |-- libproxy

+    |   |   |-- gcc47-include-unistd.h.diff.gz

+    |   |   |-- libproxy-0.4.7.tar.xz

+    |   |   |-- libproxy.SlackBuild

+    |   |   |-- libproxy.url

+    |   |   |-- only_link_mozjs185.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libraw1394

+    |   |   |-- README

+    |   |   |-- libraw1394-2.0.7.tar.sign

+    |   |   |-- libraw1394-2.0.7.tar.xz

+    |   |   |-- libraw1394.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- librsvg

+    |   |   |-- librsvg-2.36.1.tar.xz

+    |   |   |-- librsvg.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libsamplerate

+    |   |   |-- libsamplerate-0.1.7.tar.xz

+    |   |   |-- libsamplerate.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libsndfile

+    |   |   |-- libsndfile-1.0.24.tar.xz

+    |   |   |-- libsndfile.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libsoup

+    |   |   |-- libsoup-2.38.1.tar.xz

+    |   |   |-- libsoup.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libspectre

+    |   |   |-- libspectre-0.2.6.tar.xz

+    |   |   |-- libspectre.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libssh

+    |   |   |-- libssh-0.5.2.tar.gz

+    |   |   |-- libssh.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libtasn1

+    |   |   |-- libtasn1-2.12.tar.xz

+    |   |   |-- libtasn1.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libtermcap

+    |   |   |-- libtermcap.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- termcap-compat_1.2.3.diff.gz

+    |   |   |-- termcap-compat_1.2.3.dsc

+    |   |   |-- termcap-compat_1.2.3.tar.gz

+    |   |   |-- termcap.bufsize.diff.gz

+    |   |   `-- termcap.h.diff.gz

+    |   |-- libtheora

+    |   |   |-- libtheora-1.1.1.tar.xz

+    |   |   |-- libtheora.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libtiff

+    |   |   |-- libtiff-CVE-2012-1173.patch.gz

+    |   |   |-- libtiff.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- tiff-3.9.6.tar.xz

+    |   |-- libusb

+    |   |   |-- libusb-1.0.9.tar.xz

+    |   |   |-- libusb.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libusb-compat

+    |   |   |-- libusb-compat-0.1.4.tar.xz

+    |   |   |-- libusb-compat.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libvisual

+    |   |   |-- libvisual-0.4.0.tar.bz2

+    |   |   |-- libvisual.SlackBuild

+    |   |   |-- libvisual.glib.h.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libvisual-plugins

+    |   |   |-- libvisual-plugins-0.4.0.tar.bz2

+    |   |   |-- libvisual-plugins.SlackBuild

+    |   |   |-- libvisual-plugins.gstreamer.diff.gz

+    |   |   `-- slack-desc

+    |   |-- libvncserver

+    |   |   |-- LibVNCServer-0.9.9.tar.xz

+    |   |   |-- libvncserver.SlackBuild

+    |   |   |-- libvncserver.info

+    |   |   `-- slack-desc

+    |   |-- libvorbis

+    |   |   |-- libvorbis-1.3.3.tar.xz

+    |   |   |-- libvorbis.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libwmf

+    |   |   |-- libwmf-0.2.8.4.tar.xz

+    |   |   |-- libwmf.SlackBuild

+    |   |   |-- libwmf.png14.diff.gz

+    |   |   |-- slack-desc

+    |   |   `-- slack-desc-docs

+    |   |-- libwnck

+    |   |   |-- libwnck-2.30.7.tar.xz

+    |   |   |-- libwnck.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libwpd

+    |   |   |-- libwpd-0.9.4.tar.xz

+    |   |   |-- libwpd.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxklavier

+    |   |   |-- libxklavier-5.2.1.tar.xz

+    |   |   |-- libxklavier.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxml2

+    |   |   |-- libxml2-2.8.0.tar.xz

+    |   |   |-- libxml2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxslt

+    |   |   |-- libxslt-1.1.26.tar.xz

+    |   |   |-- libxslt.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libyaml

+    |   |   |-- libyaml.SlackBuild

+    |   |   |-- libyaml.url

+    |   |   |-- slack-desc

+    |   |   `-- yaml-0.1.4.tar.xz

+    |   |-- libzip

+    |   |   |-- libzip-0.9.3.tar.bz2

+    |   |   |-- libzip.SlackBuild

+    |   |   |-- libzip.info

+    |   |   `-- slack-desc

+    |   |-- loudmouth

+    |   |   |-- loudmouth-1.4.3-glib-compile-fix.patch.gz

+    |   |   |-- loudmouth-1.4.3.tar.xz

+    |   |   |-- loudmouth.SlackBuild

+    |   |   |-- loudmouth.async_assertion.diff.gz

+    |   |   |-- loudmouth.crtpath.diff.gz

+    |   |   |-- loudmouth.gnutls.configure.ac.diff.gz

+    |   |   |-- loudmouth.sasl-md5-digest-uri.diff.gz

+    |   |   |-- loudmouth.stanzadrop.diff.gz

+    |   |   `-- slack-desc

+    |   |-- lzo

+    |   |   |-- lzo-2.03.tar.xz

+    |   |   |-- lzo.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- media-player-info

+    |   |   |-- media-player-info-17.tar.xz

+    |   |   |-- media-player-info.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mhash

+    |   |   |-- mhash-0.9.9.9.tar.bz2

+    |   |   |-- mhash.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mm

+    |   |   |-- mm-1.4.2.tar.bz2

+    |   |   |-- mm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mozilla-nss

+    |   |   |-- MPL-1.1.txt

+    |   |   |-- faq.html

+    |   |   |-- gpl-2.0.txt

+    |   |   |-- lgpl-2.1.txt

+    |   |   |-- mozilla-nss.SlackBuild

+    |   |   |-- nspr-4.9.1.tar.xz

+    |   |   |-- nss-3.13.5.tar.xz

+    |   |   |-- nss-config.in

+    |   |   `-- slack-desc

+    |   |-- mpfr

+    |   |   |-- mpfr-3.1.0.tar.xz

+    |   |   |-- mpfr-3.1.0.tar.xz.sig

+    |   |   |-- mpfr.SlackBuild

+    |   |   |-- patches

+    |   |   `-- slack-desc

+    |   |-- ncurses

+    |   |   |-- Eterm.ti

+    |   |   |-- ncurses-5.9.tar.xz

+    |   |   |-- ncurses.SlackBuild

+    |   |   |-- ncurses.mkhashsize.diff.gz

+    |   |   |-- patches

+    |   |   |-- rxvt.terminfo

+    |   |   |-- screeninfo.src

+    |   |   |-- slack-desc

+    |   |   `-- xterm.terminfo

+    |   |-- neon

+    |   |   |-- neon-0.29.6.tar.xz

+    |   |   |-- neon.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netpbm

+    |   |   |-- config.mk.gz

+    |   |   |-- netpbm-10.49.02.tar.xz

+    |   |   |-- netpbm-manpages.tar.bz2

+    |   |   |-- netpbm.SlackBuild

+    |   |   |-- slack-desc

+    |   |   `-- svn-checkout-stable.sh

+    |   |-- notify-python

+    |   |   |-- libnotify07.patch.gz

+    |   |   |-- notify-python-0.1.1.tar.bz2

+    |   |   |-- notify-python.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- openexr

+    |   |   |-- openexr-1.7.0.tar.xz

+    |   |   |-- openexr.SlackBuild

+    |   |   |-- openexr.gcc4.diff.gz

+    |   |   |-- openexr.info

+    |   |   `-- slack-desc

+    |   |-- pango

+    |   |   |-- pango-1.30.1.tar.xz

+    |   |   |-- pango.SlackBuild

+    |   |   |-- pango.etc.host.location.diff.gz

+    |   |   |-- slack-desc

+    |   |   `-- update-pango-querymodules

+    |   |-- parted

+    |   |   |-- parted-2.3.tar.xz

+    |   |   |-- parted.SlackBuild

+    |   |   |-- parted.SlackBuild.static

+    |   |   |-- parted.configure.diff.gz

+    |   |   `-- slack-desc

+    |   |-- pcre

+    |   |   |-- pcre-8.12.tar.xz

+    |   |   |-- pcre.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- phonon

+    |   |   |-- phonon-4.6.0.tar.xz

+    |   |   |-- phonon.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- phonon-gstreamer

+    |   |   |-- phonon-backend-gstreamer-4.6.2.tar.xz

+    |   |   |-- phonon-gstreamer.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- phonon-mplayer

+    |   |   |-- cmake_fixes.tar.gz

+    |   |   |-- phonon-mplayer-1b1fd1f_20110823git.tar.xz

+    |   |   |-- phonon-mplayer.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- phonon-xine

+    |   |   |-- phonon-backend-xine-4.4.4.find.phonon.patch

+    |   |   |-- phonon-backend-xine-4.4.4.tar.bz2

+    |   |   |-- phonon-xine.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pil

+    |   |   |-- Imaging-1.1.7.tar.xz

+    |   |   |-- pil.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pilot-link

+    |   |   |-- pilot-link-0.12.5.tar.bz2

+    |   |   |-- pilot-link-0.12.5.tar.bz2.asc

+    |   |   |-- pilot-link.SlackBuild

+    |   |   |-- pilot-link.png14.diff.gz

+    |   |   `-- slack-desc

+    |   |-- polkit

+    |   |   |-- 10-org.freedesktop.NetworkManager.pkla

+    |   |   |-- 20-plugdev-group-mount-override.pkla

+    |   |   |-- doinst.sh.gz

+    |   |   |-- polkit-0.105.tar.xz

+    |   |   |-- polkit.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- polkit-gnome

+    |   |   |-- polkit-gnome-0.102.tar.xz

+    |   |   |-- polkit-gnome-authentication-agent-1.desktop

+    |   |   |-- polkit-gnome.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- polkit-qt-1

+    |   |   |-- polkit-qt-1-0.103.0.tar.bz2

+    |   |   |-- polkit-qt-1.SlackBuild

+    |   |   |-- pull-polkit-qt-1

+    |   |   `-- slack-desc

+    |   |-- poppler

+    |   |   |-- poppler-0.20.2.tar.xz

+    |   |   |-- poppler.SlackBuild

+    |   |   |-- poppler_xyscale.patch.gz

+    |   |   `-- slack-desc

+    |   |-- poppler-data

+    |   |   |-- poppler-data-0.4.5.tar.xz

+    |   |   |-- poppler-data.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- popt

+    |   |   |-- popt-1.7.tar.bz2

+    |   |   |-- popt.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pycairo

+    |   |   |-- py2cairo-1.8.10.tar.xz

+    |   |   |-- pycairo.SlackBuild

+    |   |   |-- pycairo.url

+    |   |   `-- slack-desc

+    |   |-- pycups

+    |   |   |-- pycups-1.9.61.tar.bz2

+    |   |   |-- pycups.SlackBuild

+    |   |   |-- pycups.info

+    |   |   `-- slack-desc

+    |   |-- pycurl

+    |   |   |-- pycurl-7.19.0.tar.gz

+    |   |   |-- pycurl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pygobject

+    |   |   |-- pygobject-2.28.6.tar.xz

+    |   |   |-- pygobject.SlackBuild

+    |   |   |-- pygobject.flags.diff.gz

+    |   |   |-- pygobject.url

+    |   |   `-- slack-desc

+    |   |-- pygtk

+    |   |   |-- pygtk-2.24.0.tar.xz

+    |   |   |-- pygtk.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pyrex

+    |   |   |-- Pyrex-0.9.9.tar.xz

+    |   |   |-- Pyrex.url

+    |   |   |-- pyrex.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- qca

+    |   |   |-- qca-2.0.2.tar.bz2

+    |   |   |-- qca.SlackBuild

+    |   |   |-- qca.info

+    |   |   `-- slack-desc

+    |   |-- qca-cyrus-sasl

+    |   |   |-- qca-cyrus-sasl-2.0.0-beta3.tar.bz2

+    |   |   |-- qca-cyrus-sasl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- qca-gnupg

+    |   |   |-- qca-gnupg-2.0.0-beta3.tar.bz2

+    |   |   |-- qca-gnupg.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- qca-ossl

+    |   |   |-- qca-ossl-2.0.0-beta3.tar.bz2

+    |   |   |-- qca-ossl-openssl-1.0.0.patch.gz

+    |   |   |-- qca-ossl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- qimageblitz

+    |   |   |-- qimageblitz-0.0.6.tar.bz2

+    |   |   |-- qimageblitz.SlackBuild

+    |   |   |-- qimageblitz.info

+    |   |   `-- slack-desc

+    |   |-- qt

+    |   |   |-- QElfParser-fix-type-of-sh_size.patch.gz

+    |   |   |-- QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch.gz

+    |   |   |-- QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch.gz

+    |   |   |-- Qt.pc

+    |   |   |-- README

+    |   |   |-- doinst.sh.gz

+    |   |   |-- profile.d

+    |   |   |   |-- qt4.csh

+    |   |   |   `-- qt4.sh

+    |   |   |-- qt-everywhere-opensource-src-4.8.2.tar.xz

+    |   |   |-- qt.SlackBuild

+    |   |   |-- qt.assistant.memcpy-crash.diff.gz

+    |   |   |-- qt.ca89c49.cursor.position.diff.gz

+    |   |   |-- qt.ld-gold.patch.gz

+    |   |   |-- qt.mysql.h.diff.gz

+    |   |   |-- qt.webkit-no_Werror.patch.gz

+    |   |   |-- qt.webkit.glib.diff.gz

+    |   |   `-- slack-desc

+    |   |-- qtscriptgenerator

+    |   |   |-- include-everything.patch.gz

+    |   |   |-- qtscriptgenerator-src-0.2.0.tar.xz

+    |   |   |-- qtscriptgenerator.SlackBuild

+    |   |   |-- qtscriptgenerator.info

+    |   |   `-- slack-desc

+    |   |-- raptor2

+    |   |   |-- raptor2-2.0.8.tar.xz

+    |   |   |-- raptor2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rasqal

+    |   |   |-- rasqal-0.9.29.tar.xz

+    |   |   |-- rasqal.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- readline

+    |   |   |-- readline-5.2-patches

+    |   |   |   |-- readline52-001

+    |   |   |   |-- readline52-001.sig

+    |   |   |   |-- readline52-002

+    |   |   |   |-- readline52-002.sig

+    |   |   |   |-- readline52-003

+    |   |   |   |-- readline52-003.sig

+    |   |   |   |-- readline52-004

+    |   |   |   |-- readline52-004.sig

+    |   |   |   |-- readline52-005

+    |   |   |   |-- readline52-005.sig

+    |   |   |   |-- readline52-006

+    |   |   |   |-- readline52-006.sig

+    |   |   |   |-- readline52-007

+    |   |   |   |-- readline52-007.sig

+    |   |   |   |-- readline52-008

+    |   |   |   |-- readline52-008.sig

+    |   |   |   |-- readline52-009

+    |   |   |   |-- readline52-009.sig

+    |   |   |   |-- readline52-010

+    |   |   |   |-- readline52-010.sig

+    |   |   |   |-- readline52-011

+    |   |   |   |-- readline52-011.sig

+    |   |   |   |-- readline52-012

+    |   |   |   |-- readline52-012.sig

+    |   |   |   |-- readline52-013

+    |   |   |   `-- readline52-013.sig

+    |   |   |-- readline-5.2.tar.bz2

+    |   |   |-- readline.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- redland

+    |   |   |-- redland-1.0.15.tar.xz

+    |   |   |-- redland.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- sdl

+    |   |   |-- SDL-1.2.14.tar.xz

+    |   |   |-- SDL_image-1.2.10.tar.xz

+    |   |   |-- SDL_mixer-1.2.11.tar.xz

+    |   |   |-- SDL_mixer.usrlocal.diff.gz

+    |   |   |-- SDL_net-1.2.7.tar.xz

+    |   |   |-- SDL_ttf-2.0.10.tar.xz

+    |   |   |-- sdl.SlackBuild

+    |   |   |-- sdl.linux-2.6.31.input_absinfo.diff.gz

+    |   |   `-- slack-desc

+    |   |-- sg3_utils

+    |   |   |-- sg3_utils-1.33.tar.xz

+    |   |   |-- sg3_utils.SlackBuild

+    |   |   |-- sg3_utils.info

+    |   |   `-- slack-desc

+    |   |-- shared-desktop-ontologies

+    |   |   |-- shared-desktop-ontologies-0.9.0.tar.bz2

+    |   |   |-- shared-desktop-ontologies.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- shared-mime-info

+    |   |   |-- doinst.sh.gz

+    |   |   |-- shared-mime-info-1.0.tar.xz

+    |   |   |-- shared-mime-info.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- sip

+    |   |   |-- sip-4.13.2.tar.xz

+    |   |   |-- sip.SlackBuild

+    |   |   |-- sip.info

+    |   |   `-- slack-desc

+    |   |-- slang

+    |   |   |-- slack-desc

+    |   |   |-- slang-2.2.3.tar.bz2

+    |   |   |-- slang-2.2.3.tar.bz2.asc

+    |   |   `-- slang.SlackBuild

+    |   |-- slang1

+    |   |   |-- slack-desc

+    |   |   |-- slang-1.4.9.tar.bz2

+    |   |   `-- slang1.SlackBuild

+    |   |-- soprano

+    |   |   |-- slack-desc

+    |   |   |-- soprano-2.7.6.tar.bz2

+    |   |   `-- soprano.SlackBuild

+    |   |-- sound-theme-freedesktop

+    |   |   |-- slack-desc

+    |   |   |-- sound-theme-freedesktop-0.7.tar.xz

+    |   |   |-- sound-theme-freedesktop.SlackBuild

+    |   |   `-- sound-theme-freedesktop.url

+    |   |-- startup-notification

+    |   |   |-- slack-desc

+    |   |   |-- startup-notification-0.12.tar.xz

+    |   |   `-- startup-notification.SlackBuild

+    |   |-- strigi

+    |   |   |-- README

+    |   |   |-- slack-desc

+    |   |   |-- strigi-0.7.7.tar.xz

+    |   |   |-- strigi-fix-ftbfs-with-gcc-4.7.diff.gz

+    |   |   |-- strigi.SlackBuild

+    |   |   `-- strigi.info

+    |   |-- svgalib

+    |   |   |-- slack-desc

+    |   |   |-- svgalib-1.9.25-kernel-2.6.26.diff.gz

+    |   |   |-- svgalib-1.9.25.tar.bz2

+    |   |   |-- svgalib.SlackBuild

+    |   |   |-- svgalib.nohelper.diff.gz

+    |   |   `-- svgalib.prefix.diff.gz

+    |   |-- system-config-printer

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- system-config-printer-1.3.9.tar.xz

+    |   |   `-- system-config-printer.SlackBuild

+    |   |-- t1lib

+    |   |   |-- slack-desc

+    |   |   |-- t1lib-5.1.2.tar.xz

+    |   |   |-- t1lib.SlackBuild

+    |   |   `-- t1lib_5.1.2-3.5.diff.gz

+    |   |-- taglib

+    |   |   |-- slack-desc

+    |   |   |-- taglib-1.7.2.tar.xz

+    |   |   `-- taglib.SlackBuild

+    |   |-- taglib-extras

+    |   |   |-- slack-desc

+    |   |   |-- taglib-extras-1.0.1.tar.gz

+    |   |   `-- taglib-extras.SlackBuild

+    |   |-- tango-icon-theme

+    |   |   |-- slack-desc

+    |   |   |-- tango-icon-theme-0.8.90.tar.bz2

+    |   |   `-- tango-icon-theme.SlackBuild

+    |   |-- tango-icon-theme-extras

+    |   |   |-- slack-desc

+    |   |   |-- tango-icon-theme-extras-0.1.0.tar.bz2

+    |   |   `-- tango-icon-theme-extras.SlackBuild

+    |   |-- urwid

+    |   |   |-- LICENSE.gz

+    |   |   |-- slack-desc

+    |   |   |-- urwid-1.0.1.tar.gz

+    |   |   |-- urwid.SlackBuild

+    |   |   `-- urwid.url

+    |   |-- v4l-utils

+    |   |   |-- slack-desc

+    |   |   |-- v4l-utils-0.8.8.tar.xz

+    |   |   `-- v4l-utils.SlackBuild

+    |   |-- virtuoso-ose

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- virtuoso-opensource-6.1.3.tar.xz

+    |   |   |-- virtuoso-opensource-6.1.3.unicode.patch

+    |   |   `-- virtuoso-ose.SlackBuild

+    |   |-- vte

+    |   |   |-- fix_meta_alt_keybinding.patch.gz

+    |   |   |-- slack-desc

+    |   |   |-- vte-0.28.2.tar.xz

+    |   |   |-- vte.SlackBuild

+    |   |   `-- vte.escape.cpu.usage.diff.gz

+    |   |-- wavpack

+    |   |   |-- slack-desc

+    |   |   |-- wavpack-4.60.1.tar.bz2

+    |   |   `-- wavpack.SlackBuild

+    |   `-- zlib

+    |       |-- slack-desc

+    |       |-- zlib-1.2.6.tar.xz

+    |       `-- zlib.SlackBuild

+    |-- n

+    |   |-- ModemManager

+    |   |   |-- ModemManager-0.5.2.0.tar.xz

+    |   |   |-- ModemManager.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- NetworkManager

+    |   |   |-- 11-initialize-nm-remote-settings.patch.gz

+    |   |   |-- 55NetworkManager

+    |   |   |-- NetworkManager-0.9.4.0.tar.xz

+    |   |   |-- NetworkManager.SlackBuild

+    |   |   |-- NetworkManager.conf.new

+    |   |   |-- README

+    |   |   |-- doinst.sh

+    |   |   `-- slack-desc

+    |   |-- alpine

+    |   |   |-- alpine.SlackBuild

+    |   |   |-- alpine.manpage.diff.gz

+    |   |   |-- alpine.tech-notes.txt.diff.gz

+    |   |   |-- doinst.sh.alpine

+    |   |   |-- pinepgp-0.18.0-makefile-sed-fix.diff.gz

+    |   |   |-- pinepgp-0.18.0.tar.gz

+    |   |   |-- pinepgp-0.18.0.tar.gz.sig

+    |   |   |-- pinepgp.pinegpgp.in.diff.gz

+    |   |   |-- re-alpine-2.02.tar.xz

+    |   |   |-- slack-desc.alpine

+    |   |   `-- slack-desc.imapd

+    |   |-- autofs

+    |   |   |-- autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz

+    |   |   |-- autofs-5.0.5.tar.bz2

+    |   |   |-- autofs.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- biff+comsat

+    |   |   |-- biff+comsat-0.17.diff.gz

+    |   |   |-- biff+comsat-0.17.tar.gz

+    |   |   |-- biff+comsat.SlackBuild

+    |   |   |-- biff+comsat.badutmp.diff.gz

+    |   |   |-- biff+comsat.offset.diff.gz

+    |   |   `-- slack-desc

+    |   |-- bind

+    |   |   |-- 3link.sh

+    |   |   |-- bind-9.9.1-P3.tar.gz

+    |   |   |-- bind-9.9.1-P3.tar.gz.asc

+    |   |   |-- bind-9.9.1-P3.tar.gz.sha1.asc

+    |   |   |-- bind-9.9.1-P3.tar.gz.sha256.asc

+    |   |   |-- bind-9.9.1-P3.tar.gz.sha512.asc

+    |   |   |-- bind.SlackBuild

+    |   |   |-- bind.so_bsdcompat.diff.gz

+    |   |   |-- caching-example

+    |   |   |   |-- localhost.zone

+    |   |   |   |-- named.conf

+    |   |   |   |-- named.local

+    |   |   |   `-- named.root

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.bind

+    |   |   `-- slack-desc

+    |   |-- bluez

+    |   |   |-- bluez-4.99.tar.sign

+    |   |   |-- bluez-4.99.tar.xz

+    |   |   |-- bluez.SlackBuild

+    |   |   |-- bluez.enable.audio.socket.diff.gz

+    |   |   |-- config

+    |   |   |   |-- bluetooth.modprobe

+    |   |   |   `-- rc.bluetooth

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- bluez-firmware

+    |   |   |-- bluez-firmware-1.2.tar.bz2

+    |   |   |-- bluez-firmware.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- bluez-hcidump

+    |   |   |-- bluez-hcidump-2.4.tar.sign

+    |   |   |-- bluez-hcidump-2.4.tar.xz

+    |   |   |-- bluez-hcidump.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- bootp

+    |   |   |-- _bootp.tar.gz

+    |   |   |-- bootp.SlackBuild

+    |   |   |-- bootp_2.4.3-15.diff.gz

+    |   |   |-- bootp_2.4.3.orig.tar.gz

+    |   |   |-- bootptab.gz

+    |   |   `-- slack-desc

+    |   |-- bridge-utils

+    |   |   |-- bridge-utils-1.4.tar.gz

+    |   |   |-- bridge-utils.SlackBuild

+    |   |   |-- bridge-utils.isbridge.diff.gz

+    |   |   `-- slack-desc

+    |   |-- bsd-finger

+    |   |   |-- bsd-finger-0.17.diff.gz

+    |   |   |-- bsd-finger-0.17.tar.gz

+    |   |   |-- bsd-finger.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ca-certificates

+    |   |   |-- ca-certificates.SlackBuild

+    |   |   |-- ca-certificates_20120623.tar.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- patches

+    |   |   |   |-- fixup_DESTDIR.diff.gz

+    |   |   |   |-- fixup_update-ca-certificates.diff.gz

+    |   |   |   `-- remove_debconf.diff.gz

+    |   |   |-- setup.11.cacerts

+    |   |   `-- slack-desc

+    |   |-- cifs-utils

+    |   |   |-- cifs-utils-5.5.tar.xz

+    |   |   |-- cifs-utils.SlackBuild

+    |   |   |-- mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch.gz

+    |   |   `-- slack-desc

+    |   |-- crda

+    |   |   |-- crda-1.1.1.tar.bz2

+    |   |   |-- crda.SlackBuild

+    |   |   |-- get_regdb.sh

+    |   |   |-- slack-desc

+    |   |   `-- wireless-regdb-git_20100502.tar.bz2

+    |   |-- curl

+    |   |   |-- cacert-fetch.sh

+    |   |   |-- cacert.pem.bz2

+    |   |   |-- curl-7.27.0.tar.bz2

+    |   |   |-- curl-7.27.0_curl-config_syntax_fix.diff.gz

+    |   |   |-- curl.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- cyrus-sasl

+    |   |   |-- cyrus-sasl-2.1.23.tar.xz

+    |   |   |-- cyrus-sasl.SlackBuild

+    |   |   |-- cyrus-sasl.bad_elif.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.saslauthd.gz

+    |   |   `-- slack-desc

+    |   |-- dhcp

+    |   |   |-- dhclient-script.PATH.diff.gz

+    |   |   |-- dhcp-4.2.4-P2.tar.gz

+    |   |   |-- dhcp-4.2.4-P2.tar.gz.asc

+    |   |   |-- dhcp-4.2.4-P2.tar.gz.sha1.asc

+    |   |   |-- dhcp-4.2.4-P2.tar.gz.sha256.asc

+    |   |   |-- dhcp-4.2.4-P2.tar.gz.sha512.asc

+    |   |   |-- dhcp-remove-bind-tarball.sh

+    |   |   |-- dhcp.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- dhcpcd

+    |   |   |-- COPYRIGHT.gz

+    |   |   |-- define-SERVICEstuff-for-Slackware.patch.gz

+    |   |   |-- dhcpcd-5.5.6.tar.bz2

+    |   |   |-- dhcpcd.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- dirmngr

+    |   |   |-- dirmngr-1.1.0.tar.xz

+    |   |   |-- dirmngr.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- dnsmasq

+    |   |   |-- dnsmasq-2.57.tar.xz

+    |   |   |-- dnsmasq.SlackBuild

+    |   |   |-- dnsmasq.leasedir.diff.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rc.dnsmasq.gz

+    |   |   `-- slack-desc

+    |   |-- elm

+    |   |   |-- config.sh

+    |   |   |-- elm.SlackBuild

+    |   |   |-- elm2.5.8.tar.bz2

+    |   |   `-- slack-desc

+    |   |-- epic5

+    |   |   |-- epic-help-current.tar.xz

+    |   |   |-- epic5-1.1.3.tar.xz

+    |   |   |-- epic5.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ethtool

+    |   |   |-- ethtool-2.6.36.tar.xz

+    |   |   |-- ethtool.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- fetchmail

+    |   |   |-- fetchmail-6.3.21.tar.xz

+    |   |   |-- fetchmail-6.3.21.tar.xz.asc

+    |   |   |-- fetchmail.SlackBuild

+    |   |   |-- fetchmail.url

+    |   |   `-- slack-desc

+    |   |-- getmail

+    |   |   |-- getmail-4.30.1.tar.gz

+    |   |   |-- getmail.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gnupg

+    |   |   |-- gnupg-1.4.12.tar.bz2

+    |   |   |-- gnupg.SlackBuild

+    |   |   `-- slack-desc.gnupg

+    |   |-- gnupg2

+    |   |   |-- gnupg-2.0.19.tar.xz

+    |   |   |-- gnupg2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gnutls

+    |   |   |-- gnutls-3.0.23.tar.xz

+    |   |   |-- gnutls-3.0.23.tar.xz.sig

+    |   |   |-- gnutls.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gpa

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gpa-0.9.3.tar.xz

+    |   |   |-- gpa.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gpgme

+    |   |   |-- gpgme-1.3.2.tar.bz2

+    |   |   |-- gpgme-1.3.2.tar.bz2.sig

+    |   |   |-- gpgme.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- htdig

+    |   |   |-- doinst.sh.gz

+    |   |   |-- htdig-3.2.0b6.diff.gz

+    |   |   |-- htdig-3.2.0b6.tar.bz2

+    |   |   |-- htdig.SlackBuild

+    |   |   |-- htdig.conf.diff.gz

+    |   |   `-- slack-desc

+    |   |-- httpd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- httpd-2.4.3.tar.bz2

+    |   |   |-- httpd-2.4.3.tar.bz2.asc

+    |   |   |-- httpd.SlackBuild

+    |   |   |-- httpd.runasapache.diff.gz

+    |   |   |-- httpd.url

+    |   |   |-- logrotate.httpd

+    |   |   |-- rc.httpd

+    |   |   `-- slack-desc

+    |   |-- icmpinfo

+    |   |   |-- icmpinfo-1.11.diff.gz

+    |   |   |-- icmpinfo-1.11.tar.gz

+    |   |   |-- icmpinfo.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- idnkit

+    |   |   |-- idnkit-1.0-src.tar.xz

+    |   |   |-- idnkit.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- iftop

+    |   |   |-- iftop-1.0pre2.tar.xz

+    |   |   |-- iftop.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- imapd -> alpine

+    |   |-- inetd

+    |   |   |-- _inetd.tar.gz

+    |   |   |-- inetd-OpenBSD-1.79.diff.gz

+    |   |   |-- inetd-OpenBSD-1.79.tar.gz

+    |   |   |-- inetd.SlackBuild

+    |   |   |-- inetd.loopingdos.diff.gz

+    |   |   `-- slack-desc

+    |   |-- iproute2

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fixup-for-x86_64.diff.gz

+    |   |   |-- iproute2-3.4.0.tar.xz

+    |   |   |-- iproute2.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- iptables

+    |   |   |-- iptables-1.4.14.tar.xz

+    |   |   |-- iptables.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- iptraf-ng

+    |   |   |-- iptraf-ng-1.0.2.tar.xz

+    |   |   |-- iptraf-ng.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- iputils

+    |   |   |-- iputils-s20101006.tar.bz2

+    |   |   |-- iputils.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- ipw2100-fw

+    |   |   |-- ipw2100-fw-1.3.tar.bz2

+    |   |   `-- ipw2100-fw.SlackBuild

+    |   |-- ipw2200-fw

+    |   |   |-- ipw2200-fw-3.1.tar.xz

+    |   |   `-- ipw2200-fw.SlackBuild

+    |   |-- irssi

+    |   |   |-- doinst.sh.gz

+    |   |   |-- irssi-0.8.15.tar.bz2

+    |   |   |-- irssi-0.8.15.tar.bz2.sig

+    |   |   |-- irssi.SlackBuild

+    |   |   |-- irssi.manpage_fix.diff.gz

+    |   |   |-- irssi.ssl_proxy.diff.gz

+    |   |   `-- slack-desc

+    |   |-- iw

+    |   |   |-- iw-3.5.tar.bz2

+    |   |   |-- iw.SlackBuild

+    |   |   |-- iw.info

+    |   |   `-- slack-desc

+    |   |-- lftp

+    |   |   |-- doinst.sh.gz

+    |   |   |-- lftp-4.3.8.tar.xz

+    |   |   |-- lftp-4.3.8.tar.xz.asc

+    |   |   |-- lftp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libassuan

+    |   |   |-- libassuan-2.0.3.tar.bz2

+    |   |   |-- libassuan-2.0.3.tar.bz2.sig

+    |   |   |-- libassuan.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgcrypt

+    |   |   |-- libgcrypt-1.5.0.tar.bz2

+    |   |   |-- libgcrypt-1.5.0.tar.bz2.sig

+    |   |   |-- libgcrypt.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libgpg-error

+    |   |   |-- libgpg-error-1.10.tar.bz2

+    |   |   |-- libgpg-error-1.10.tar.bz2.sig

+    |   |   |-- libgpg-error.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libksba

+    |   |   |-- libksba-1.2.0.tar.bz2

+    |   |   |-- libksba-1.2.0.tar.bz2.sig

+    |   |   |-- libksba.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- links

+    |   |   |-- links-2.7.tar.xz

+    |   |   |-- links.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- lynx

+    |   |   |-- lynx.SlackBuild

+    |   |   |-- lynx.cfg.diff.gz

+    |   |   |-- lynx.path.diff.gz

+    |   |   |-- lynx2.8.7.tar.xz

+    |   |   `-- slack-desc

+    |   |-- mailx

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mailx-12.5.tar.xz

+    |   |   |-- mailx.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mcabber

+    |   |   |-- mcabber-0.10.1.tar.bz2

+    |   |   |-- mcabber.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- metamail

+    |   |   |-- metamail-2.7.tar.xz

+    |   |   |-- metamail.SlackBuild

+    |   |   |-- metamail.automake.diff.xz

+    |   |   |-- metamail.uue.getline.diff.gz

+    |   |   |-- metamail_2.7-54.diff.xz

+    |   |   `-- slack-desc

+    |   |-- mobile-broadband-provider-info

+    |   |   |-- README

+    |   |   |-- mobile-broadband-provider-info-20120614.tar.xz

+    |   |   |-- mobile-broadband-provider-info.SlackBuild

+    |   |   |-- mobile-broadband-provider-info.pc.diff.gz

+    |   |   `-- slack-desc

+    |   |-- mtr

+    |   |   |-- mtr-0.82.tar.xz

+    |   |   |-- mtr.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mutt

+    |   |   |-- doinst.sh.gz

+    |   |   |-- mutt-1.5.21.tar.xz

+    |   |   |-- mutt.SlackBuild

+    |   |   |-- mutt.gpgme.diff.gz

+    |   |   `-- slack-desc

+    |   |-- nc

+    |   |   |-- nc-110-21.diff.gz

+    |   |   |-- nc.SlackBuild

+    |   |   |-- nc.diff.gz

+    |   |   |-- nc110.tgz

+    |   |   `-- slack-desc

+    |   |-- ncftp

+    |   |   |-- ncftp-3.2.5-src.tar.bz2

+    |   |   |-- ncftp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- net-snmp

+    |   |   |-- doinst.sh.gz

+    |   |   |-- net-snmp-5.6.1.tar.xz

+    |   |   |-- net-snmp.SlackBuild

+    |   |   |-- net-snmp.net-snmp-create-v3-user.etc.snmpd.conf.diff.gz

+    |   |   |-- rc.snmpd

+    |   |   |-- slack-desc

+    |   |   `-- snmpd.conf.gz

+    |   |-- net-tools

+    |   |   |-- ipmask.8

+    |   |   |-- ipmask.c

+    |   |   |-- net-tools-1.60.20120726git.tar.xz

+    |   |   |-- net-tools.SlackBuild

+    |   |   |-- net-tools.config.h.gz

+    |   |   |-- net-tools.url

+    |   |   `-- slack-desc

+    |   |-- netatalk

+    |   |   |-- afppasswd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- netatalk-2.2.3.tar.xz

+    |   |   |-- netatalk.SlackBuild

+    |   |   |-- netatalk.etc2ps.diff.gz

+    |   |   |-- rc.atalk.new

+    |   |   `-- slack-desc

+    |   |-- netdate

+    |   |   |-- netdate.SlackBuild

+    |   |   |-- netdate.diff.gz

+    |   |   |-- netdate.diff2.gz

+    |   |   |-- netdate.tar.gz

+    |   |   `-- slack-desc

+    |   |-- netkit-bootparamd

+    |   |   |-- netkit-bootparamd-0.17.tar.gz

+    |   |   |-- netkit-bootparamd.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netkit-ftp

+    |   |   |-- netkit-ftp-0.17.tar.gz

+    |   |   |-- netkit-ftp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netkit-ntalk

+    |   |   |-- netkit-ntalk-0.11.diff.gz

+    |   |   |-- netkit-ntalk-0.11.tar.gz

+    |   |   |-- netkit-ntalk-0.17.diff.gz

+    |   |   |-- netkit-ntalk-0.17.tar.gz

+    |   |   |-- netkit-ntalk.SlackBuild

+    |   |   |-- ntalk-0.17-slackware-alt-talkd.patch.gz

+    |   |   `-- slack-desc

+    |   |-- netkit-routed

+    |   |   |-- netkit-routed-0.17.diff.gz

+    |   |   |-- netkit-routed-0.17.tar.gz

+    |   |   |-- netkit-routed.SlackBuild

+    |   |   |-- routed.18.candidate.final.patch.gz

+    |   |   `-- slack-desc

+    |   |-- netkit-rsh

+    |   |   |-- netkit-rsh-0.17.tar.gz

+    |   |   |-- netkit-rsh.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netkit-rusers

+    |   |   |-- netkit-rusers-0.17.diff.gz

+    |   |   |-- netkit-rusers-0.17.tar.gz

+    |   |   |-- netkit-rusers.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netkit-rwall

+    |   |   |-- netkit-rwall-0.17.tar.gz

+    |   |   |-- netkit-rwall.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netkit-rwho

+    |   |   |-- netkit-rwho-0.17.diff.gz

+    |   |   |-- netkit-rwho-0.17.tar.gz

+    |   |   |-- netkit-rwho.SlackBuild

+    |   |   |-- rwhod_getloadavg.diff.gz

+    |   |   `-- slack-desc

+    |   |-- netkit-timed

+    |   |   |-- netkit-timed-0.17.diff.gz

+    |   |   |-- netkit-timed-0.17.tar.gz

+    |   |   |-- netkit-timed.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netpipes

+    |   |   |-- _netpipes.tar.gz

+    |   |   |-- netpipes-4.2-export.tar.gz

+    |   |   |-- netpipes.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- nettle

+    |   |   |-- nettle-2.5.tar.xz

+    |   |   |-- nettle.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- netwatch

+    |   |   |-- netwatch-1.3.0-1.tar.gz

+    |   |   |-- netwatch.SlackBuild

+    |   |   |-- netwatch.makefile.diff.gz

+    |   |   |-- netwatch.phonemyself.diff.gz

+    |   |   `-- slack-desc

+    |   |-- network-scripts

+    |   |   |-- README.rc.inet1

+    |   |   |-- doinst.sh.gz

+    |   |   |-- manpages

+    |   |   |   |-- rc.inet1.8

+    |   |   |   `-- rc.inet1.conf.5

+    |   |   |-- network-scripts.SlackBuild

+    |   |   |-- scripts

+    |   |   |   |-- HOSTNAME

+    |   |   |   |-- host.conf

+    |   |   |   |-- hosts

+    |   |   |   |-- hosts.allow

+    |   |   |   |-- hosts.deny

+    |   |   |   |-- hosts.equiv

+    |   |   |   |-- netconfig

+    |   |   |   |-- networks

+    |   |   |   |-- nntpserver

+    |   |   |   |-- protocols

+    |   |   |   |-- rc.inet1

+    |   |   |   |-- rc.inet1.conf

+    |   |   |   |-- rc.inet2

+    |   |   |   |-- rc.ip_forward

+    |   |   |   |-- resolv.conf

+    |   |   |   `-- setup.netconfig

+    |   |   `-- slack-desc

+    |   |-- netwrite

+    |   |   |-- netwrite-0.17.diff.gz

+    |   |   |-- netwrite-0.17.tar.gz

+    |   |   |-- netwrite.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- newspost

+    |   |   |-- newspost-2.1.1.tar.gz

+    |   |   |-- newspost.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- nfs-utils

+    |   |   |-- _nfs-utils.tar.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- nfs-utils-1.2.3.tar.sign

+    |   |   |-- nfs-utils-1.2.3.tar.xz

+    |   |   |-- nfs-utils.SlackBuild

+    |   |   |-- nfs-utils.lwrap.needs.lnsl.diff.gz

+    |   |   |-- rc.nfsd

+    |   |   `-- slack-desc

+    |   |-- nmap

+    |   |   |-- nmap-6.01.tar.xz

+    |   |   |-- nmap.SlackBuild

+    |   |   |-- nmap.ndiff.mandir.diff.gz

+    |   |   `-- slack-desc

+    |   |-- nn

+    |   |   |-- NNTP.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- m-x86_64.h.gz

+    |   |   |-- nn-6.7.3.tar.bz2

+    |   |   |-- nn.SlackBuild

+    |   |   |-- nn.badnntphost.diff.gz

+    |   |   |-- nn.destdir.diff.gz

+    |   |   |-- nn.diff.gz

+    |   |   |-- nntpserver.gz

+    |   |   `-- slack-desc

+    |   |-- ntp

+    |   |   |-- doinst.sh.gz

+    |   |   |-- ntp-4.2.6p5.tar.xz

+    |   |   |-- ntp.SlackBuild

+    |   |   |-- ntp.conf

+    |   |   |-- ntp.keys

+    |   |   |-- ntp.nano.diff.gz

+    |   |   |-- rc.ntpd

+    |   |   `-- slack-desc

+    |   |-- obex-data-server

+    |   |   |-- doinst.sh.gz

+    |   |   |-- obex-data-server-0.4.6.tar.xz

+    |   |   |-- obex-data-server.SlackBuild

+    |   |   |-- obex-data-server.url

+    |   |   `-- slack-desc

+    |   |-- obexfs

+    |   |   |-- obexfs-0.12.tar.bz2

+    |   |   |-- obexfs.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- obexftp

+    |   |   |-- obexftp-0.23.tar.bz2

+    |   |   |-- obexftp.SlackBuild

+    |   |   |-- ruby_rstringlen.diff.gz

+    |   |   `-- slack-desc

+    |   |-- openldap-client

+    |   |   |-- doinst.sh.gz

+    |   |   |-- openldap-2.4.31.tar.xz

+    |   |   |-- openldap-client.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- openobex

+    |   |   |-- openobex-1.5.tar.bz2

+    |   |   |-- openobex.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- openssh

+    |   |   |-- doinst.sh.gz

+    |   |   |-- openssh-6.1p1.tar.gz

+    |   |   |-- openssh-6.1p1.tar.gz.asc

+    |   |   |-- openssh.SlackBuild

+    |   |   |-- rc.sshd

+    |   |   `-- slack-desc

+    |   |-- openssl

+    |   |   |-- certwatch.gz

+    |   |   |-- doinst.sh-openssl-solibs.gz

+    |   |   |-- doinst.sh-openssl.gz

+    |   |   |-- openssl-1.0.1c.tar.gz

+    |   |   |-- openssl-1.0.1c.tar.gz.asc

+    |   |   |-- openssl.SlackBuild

+    |   |   |-- openssl.optsx86.diff.gz

+    |   |   |-- openssl.soname.diff.gz

+    |   |   |-- openssl0

+    |   |   |   |-- certwatch.gz

+    |   |   |   |-- doinst.sh-openssl-solibs.gz

+    |   |   |   |-- doinst.sh-openssl.gz

+    |   |   |   |-- openssl-0.9.8x.tar.gz

+    |   |   |   |-- openssl-0.9.8x.tar.gz.asc

+    |   |   |   |-- openssl.SlackBuild

+    |   |   |   |-- openssl.optsx86.diff.gz

+    |   |   |   |-- openssl.soname.diff.gz

+    |   |   |   |-- openssl0.build

+    |   |   |   |-- slack-desc.openssl

+    |   |   |   `-- slack-desc.openssl-solibs

+    |   |   |-- slack-desc.openssl

+    |   |   `-- slack-desc.openssl-solibs

+    |   |-- openvpn

+    |   |   |-- README

+    |   |   |-- openvpn-2.2.2.tar.gz

+    |   |   |-- openvpn-2.2.2.tar.gz.asc

+    |   |   |-- openvpn.SlackBuild

+    |   |   |-- openvpn.conf.sample

+    |   |   `-- slack-desc

+    |   |-- p11-kit

+    |   |   |-- p11-kit-0.12.tar.xz

+    |   |   |-- p11-kit.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- php

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fetch-php.sh

+    |   |   |-- mod_php.conf.example

+    |   |   |-- pear

+    |   |   |-- php-5.4.7.tar.xz

+    |   |   |-- php-fpm.conf.diff.gz

+    |   |   |-- php.SlackBuild

+    |   |   |-- php.ini-development.diff.gz

+    |   |   `-- slack-desc

+    |   |-- pidentd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- pidentd-3.0.19.tar.gz

+    |   |   |-- pidentd-3.0.19.tar.gz.sig

+    |   |   |-- pidentd.SlackBuild

+    |   |   |-- pidentd.conf.diff.gz

+    |   |   `-- slack-desc

+    |   |-- pinentry

+    |   |   |-- pinentry-0.8.1.tar.xz

+    |   |   |-- pinentry.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- popa3d

+    |   |   |-- doinst.sh.gz

+    |   |   |-- popa3d-1.0.2.tar.gz

+    |   |   |-- popa3d-1.0.2.tar.gz.sign

+    |   |   |-- popa3d.SlackBuild

+    |   |   |-- popa3d.diff.gz

+    |   |   `-- slack-desc

+    |   |-- portmap

+    |   |   |-- doinst.sh.gz

+    |   |   |-- portmap-6.0.tar.bz2

+    |   |   |-- portmap.SlackBuild

+    |   |   |-- portmap.lwrap.needs.lnsl.diff.gz

+    |   |   |-- rc.rpc.gz

+    |   |   `-- slack-desc

+    |   |-- ppp

+    |   |   |-- doinst.sh.gz

+    |   |   |-- options.new.gz

+    |   |   |-- ppp-2.4.5.tar.bz2

+    |   |   |-- ppp.SlackBuild

+    |   |   |-- ppp.slack.diff.gz

+    |   |   |-- pppsetup-1.98.backupfiles.diff.gz

+    |   |   |-- pppsetup-1.98.moredevs.diff.gz

+    |   |   |-- pppsetup-1.98.pppoff.diff.gz

+    |   |   |-- pppsetup-1.98.slack.diff.gz

+    |   |   |-- pppsetup-1.98.tar.gz

+    |   |   |-- radius.msdict.gz

+    |   |   |-- radiusclient-0.3.2.tar.bz2

+    |   |   |-- realms.gz

+    |   |   |-- servers.gz

+    |   |   `-- slack-desc

+    |   |-- procmail

+    |   |   |-- _procmail.tar.gz

+    |   |   |-- procmail-3.22.tar.gz

+    |   |   |-- procmail-3.22.tar.gz.sig

+    |   |   |-- procmail.SlackBuild

+    |   |   |-- procmail.lfs.diff.gz

+    |   |   |-- procmail_3.22-5.diff.gz

+    |   |   `-- slack-desc

+    |   |-- proftpd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- etc

+    |   |   |   |-- ftpusers

+    |   |   |   `-- proftpd.conf

+    |   |   |-- proftpd-1.3.4a.tar.xz

+    |   |   |-- proftpd.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pssh

+    |   |   |-- pssh-2.3.1.tar.gz

+    |   |   |-- pssh.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pth

+    |   |   |-- pth-2.0.7.tar.bz2

+    |   |   |-- pth.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rdist

+    |   |   |-- rdist-6.1.5-00.linux.diff.gz

+    |   |   |-- rdist-6.1.5-01.links.diff.gz

+    |   |   |-- rdist-6.1.5-03.hardlink.diff.gz

+    |   |   |-- rdist-6.1.5-04.bison.diff.gz

+    |   |   |-- rdist-6.1.5-05.varargs.diff.gz

+    |   |   |-- rdist-6.1.5-06.maxargs.diff.gz

+    |   |   |-- rdist-6.1.5-07.lfs.diff.gz

+    |   |   |-- rdist-6.1.5-08.cleanup.diff.gz

+    |   |   |-- rdist-6.1.5-09.svr4.diff.gz

+    |   |   |-- rdist-6.1.5-10.ssh.diff.gz

+    |   |   |-- rdist-6.1.5-11.mkstemp.diff.gz

+    |   |   |-- rdist-6.1.5-12.stat64.diff.gz

+    |   |   |-- rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz

+    |   |   |-- rdist-6.1.5.tar.gz

+    |   |   |-- rdist-eu-license.txt

+    |   |   |-- rdist.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rfkill

+    |   |   |-- rfkill-0.4.tar.bz2

+    |   |   |-- rfkill.SlackBuild

+    |   |   |-- rfkill.url

+    |   |   `-- slack-desc

+    |   |-- rp-pppoe

+    |   |   |-- doinst.sh.gz

+    |   |   |-- rp-pppoe-3.10.tar.gz

+    |   |   |-- rp-pppoe.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rsync

+    |   |   |-- rsync-3.0.9.tar.xz

+    |   |   |-- rsync.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- samba

+    |   |   |-- doinst.sh.gz

+    |   |   |-- prune-samba.sh

+    |   |   |-- rc.samba

+    |   |   |-- samba-3.6.8.tar.xz

+    |   |   |-- samba.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- smb.conf.default

+    |   |   |-- smb.conf.default.orig

+    |   |   |-- smb.conf.diff.gz

+    |   |   `-- talloc.pc

+    |   |-- sendmail

+    |   |   |-- 8.14.5.auth2.p0

+    |   |   |-- 8.14.5.auth2.p0.sig

+    |   |   |-- Build.gz

+    |   |   |-- SlackBuild

+    |   |   |-- SlackBuild-sendmail

+    |   |   |-- SlackBuild-sendmail-cf

+    |   |   |-- _sendmail.tar.gz

+    |   |   |-- linux.uucp.mc

+    |   |   |-- sendmail-slackware-tls-sasl.mc

+    |   |   |-- sendmail-slackware-tls.mc

+    |   |   |-- sendmail-slackware.mc

+    |   |   |-- sendmail.8.14.5.tar.gz

+    |   |   |-- sendmail.8.14.5.tar.gz.sig

+    |   |   |-- site.config.m4

+    |   |   |-- slack-desc.sendmail

+    |   |   `-- slack-desc.sendmail-cf

+    |   |-- slrn

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- slrn-0.9.9p1.tar.bz2

+    |   |   `-- slrn.SlackBuild

+    |   |-- snownews

+    |   |   |-- slack-desc

+    |   |   |-- snownews-1.5.12.tar.gz

+    |   |   |-- snownews-1.5.12.tar.gz.asc

+    |   |   `-- snownews.SlackBuild

+    |   |-- stunnel

+    |   |   |-- doinst.sh.gz

+    |   |   |-- generate-stunnel-key.sh

+    |   |   |-- slack-desc

+    |   |   |-- stunnel-4.53.tar.gz

+    |   |   |-- stunnel-4.53.tar.gz.asc

+    |   |   `-- stunnel.SlackBuild

+    |   |-- tcp_wrappers

+    |   |   |-- slack-desc

+    |   |   |-- tcp_wrappers.SlackBuild

+    |   |   `-- tcp_wrappers_7.6.tar.gz

+    |   |-- tcpdump

+    |   |   |-- slack-desc

+    |   |   |-- tcpdump-4.3.0.tar.gz

+    |   |   |-- tcpdump-4.3.0.tar.gz.sig

+    |   |   `-- tcpdump.SlackBuild

+    |   |-- telnet

+    |   |   |-- netkit-telnet-0.17-ayt.patch.gz

+    |   |   |-- netkit-telnet-0.17.diff.gz

+    |   |   |-- netkit-telnet-0.17.tar.gz

+    |   |   |-- slack-desc

+    |   |   |-- telnet-OpenBSD-014_telnet.diff.gz

+    |   |   |-- telnet-OpenBSD-20020321.diff.gz

+    |   |   |-- telnet-OpenBSD-20020321.tar.gz

+    |   |   `-- telnet.SlackBuild

+    |   |-- tftp-hpa

+    |   |   |-- slack-desc

+    |   |   |-- tftp-hpa-0.49.tar.bz2

+    |   |   |-- tftp-hpa-0.49.tar.bz2.sign

+    |   |   `-- tftp-hpa.SlackBuild

+    |   |-- tin

+    |   |   |-- slack-desc

+    |   |   |-- tin-1.8.3.tar.bz2

+    |   |   |-- tin-1.8.3.tar.bz2.sign

+    |   |   `-- tin.SlackBuild

+    |   |-- traceroute

+    |   |   |-- slack-desc

+    |   |   |-- traceroute-2.0.18.tar.gz

+    |   |   `-- traceroute.SlackBuild

+    |   |-- trn

+    |   |   |-- _trn.tar.gz

+    |   |   |-- config.sh.gz

+    |   |   |-- config.x86_64.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- trn-3.6.tar.gz

+    |   |   `-- trn.SlackBuild

+    |   |-- uucp

+    |   |   |-- _uucp.tar.gz

+    |   |   |-- policy.h.diff.gz

+    |   |   |-- slack-desc

+    |   |   |-- uucp-1.07.tar.gz

+    |   |   `-- uucp.SlackBuild

+    |   |-- vlan

+    |   |   |-- slack-desc

+    |   |   |-- vlan.1.9.tar.bz2

+    |   |   `-- vlan.SlackBuild

+    |   |-- vsftpd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- vsftpd-3.0.2.tar.gz

+    |   |   |-- vsftpd-3.0.2.tar.gz.asc

+    |   |   |-- vsftpd.SlackBuild

+    |   |   |-- vsftpd.builddefs.diff.gz

+    |   |   |-- vsftpd.conf.diff.gz

+    |   |   `-- vsftpd.log.gz

+    |   |-- wget

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- wget-1.14.tar.xz

+    |   |   |-- wget-1.14.tar.xz.sig

+    |   |   `-- wget.SlackBuild

+    |   |-- whois

+    |   |   |-- slack-desc

+    |   |   |-- whois.SlackBuild

+    |   |   `-- whois_5.0.15.tar.xz

+    |   |-- wireless-tools

+    |   |   |-- doinst.sh.gz

+    |   |   |-- scripts

+    |   |   |   |-- rc.wireless

+    |   |   |   `-- rc.wireless.conf

+    |   |   |-- slack-desc

+    |   |   |-- wireless_tools.29.tar.gz

+    |   |   |-- wireless_tools.SlackBuild

+    |   |   |-- wireless_tools.nowhine.diff.gz

+    |   |   `-- wireless_tools.static.diff.gz

+    |   |-- wpa_supplicant

+    |   |   |-- README.slackware

+    |   |   |-- config

+    |   |   |   |-- dot.config

+    |   |   |   |-- wpa_gui.desktop

+    |   |   |   |-- wpa_gui.png

+    |   |   |   |-- wpa_supplicant.conf

+    |   |   |   `-- wpa_supplicant.logrotate

+    |   |   |-- doinst.sh.gz

+    |   |   |-- patches

+    |   |   |   |-- dbus-service-file-args.diff

+    |   |   |   |-- include-unistd_h.diff

+    |   |   |   |-- libnl3-includes.diff

+    |   |   |   |-- quiet-scan-results-message.diff

+    |   |   |   `-- squelch-driver-disconnect-spam.diff

+    |   |   |-- slack-desc

+    |   |   |-- wpa_supplicant-1.0.tar.xz

+    |   |   `-- wpa_supplicant.SlackBuild

+    |   |-- yptools

+    |   |   |-- nsswitch.conf-nis.gz

+    |   |   |-- rc.yp.gz

+    |   |   |-- slack-desc

+    |   |   |-- yp-tools-2.12.tar.bz2

+    |   |   |-- yp-tools-2.12.tar.bz2.sign

+    |   |   |-- ypbind-mt-1.32.tar.bz2

+    |   |   |-- ypbind-mt-1.32.tar.sign

+    |   |   |-- ypserv-2.24.tar.bz2

+    |   |   |-- ypserv-2.24.tar.sign

+    |   |   `-- yptools.SlackBuild

+    |   |-- ytalk

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- ytalk-3.3.0.tar.bz2

+    |   |   `-- ytalk.SlackBuild

+    |   `-- zd1211-firmware

+    |       |-- zd1211-firmware-1.4.tar.bz2

+    |       `-- zd1211-firmware.SlackBuild

+    |-- t

+    |   |-- tetex

+    |   |   |-- jadetex-3.13.tar.gz

+    |   |   |-- jadetex.build

+    |   |   |-- profile.d

+    |   |   |   |-- tetex.csh

+    |   |   |   `-- tetex.sh

+    |   |   |-- slack-desc.tetex

+    |   |   |-- slack-desc.tetex-doc

+    |   |   |-- tetex-src-3.0.tar.xz

+    |   |   |-- tetex-texmf-3.0.tar.xz

+    |   |   |-- tetex-texmfsrc-3.0.tar.xz

+    |   |   |-- tetex.CVE-2005-3193.diff.gz

+    |   |   |-- tetex.SlackBuild

+    |   |   |-- tetex.afm2tfm.getline.diff.gz

+    |   |   |-- tetex.amstex.fmtutil.diff.gz

+    |   |   |-- tetex.browsers.diff.gz

+    |   |   |-- tetex.cpascal.getline.posix.2008.diff.gz

+    |   |   |-- tetex.dvipdfm.mkstemp.diff.gz

+    |   |   |-- tetex.etex.diff.gz

+    |   |   |-- tetex.fontcachedirinhome.diff.gz

+    |   |   |-- tetex.leet.diff.gz

+    |   |   |-- tetex.png14.diff.gz

+    |   |   |-- tetex.scripts.mktemp.diff.gz

+    |   |   |-- tetex.tmp.cleanup.diff.gz

+    |   |   `-- tetex.var.fonts.diff.gz

+    |   |-- transfig

+    |   |   |-- slack-desc

+    |   |   |-- transfig.3.2.4-gcc4.patch.gz

+    |   |   |-- transfig.3.2.4.tar.gz

+    |   |   |-- transfig.SlackBuild

+    |   |   |-- transfig.diff.gz

+    |   |   `-- transfig.png14.nodither.diff.gz

+    |   `-- xfig

+    |       |-- slack-desc

+    |       |-- xfig-3.2.4-mkstemp.diff.gz

+    |       |-- xfig.3.2.3d-international-std-fonts.diff.gz

+    |       |-- xfig.3.2.3d-xcolor.diff.gz

+    |       |-- xfig.3.2.3d-xim.diff.gz

+    |       |-- xfig.3.2.4-gcc4.diff.gz

+    |       |-- xfig.3.2.4-locale.diff.gz

+    |       |-- xfig.3.2.4-null.diff.gz

+    |       |-- xfig.3.2.4-quiet.diff.gz

+    |       |-- xfig.3.2.4-urw-fonts.diff.gz

+    |       |-- xfig.3.2.4.diff.gz

+    |       |-- xfig.3.2.4.full.tar.bz2

+    |       |-- xfig.SlackBuild

+    |       |-- xfig.docs.location.diff.gz

+    |       |-- xfig.fig.ad.diff.gz

+    |       |-- xfig.no.pdf.ref.diff.gz

+    |       |-- xfig.no.xfig_ref_en.pdf.diff.gz

+    |       `-- xfig.png14.nodither.diff.gz

+    |-- tcl

+    |   |-- expect

+    |   |   |-- expect-5.44.1.15.tar.bz2

+    |   |   |-- expect.SlackBuild

+    |   |   |-- expect.exp_main_tk.c.version.require.diff.gz

+    |   |   `-- slack-desc

+    |   |-- hfsutils

+    |   |   |-- hfsutils-3.2.6.tar.gz

+    |   |   |-- hfsutils-3.2.6.tar.gz.sign

+    |   |   |-- hfsutils.SlackBuild

+    |   |   |-- hfsutils.errno.diff.gz

+    |   |   `-- slack-desc

+    |   |-- tcl

+    |   |   |-- slack-desc

+    |   |   |-- tcl.SlackBuild

+    |   |   `-- tcl8.5.11-src.tar.xz

+    |   |-- tclx

+    |   |   |-- slack-desc

+    |   |   |-- tclx-8.4.configure.diff.gz

+    |   |   |-- tclx-8.4.gcc4.diff.gz

+    |   |   |-- tclx.SlackBuild

+    |   |   `-- tclx8.4.tar.bz2

+    |   |-- tix

+    |   |   |-- Tix8.4.3.tar.gz

+    |   |   |-- slack-desc

+    |   |   |-- tix.SlackBuild

+    |   |   |-- tix.soname.patch.gz

+    |   |   `-- tix.tcl8.5.patch.gz

+    |   `-- tk

+    |       |-- slack-desc

+    |       |-- tk.SlackBuild

+    |       `-- tk8.5.11-src.tar.xz

+    |-- x

+    |   |-- anthy

+    |   |   |-- anthy-9100h.tar.xz

+    |   |   |-- anthy.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- dejavu-fonts-ttf

+    |   |   |-- dejavu-fonts-ttf-2.33.tar.xz

+    |   |   |-- dejavu-fonts-ttf.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- fontconfig

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fontconfig-2.9.0.tar.xz

+    |   |   |-- fontconfig.SlackBuild

+    |   |   |-- fontconfig.dejavu.diff.gz

+    |   |   |-- fontconfig.font.dir.list.diff.gz

+    |   |   |-- setup.05.fontconfig

+    |   |   `-- slack-desc

+    |   |-- freeglut

+    |   |   |-- RATIONALE

+    |   |   |-- freeglut-2.8.0.tar.xz

+    |   |   |-- freeglut.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- glew

+    |   |   |-- glew-1.5.7.tar.xz

+    |   |   |-- glew.SlackBuild

+    |   |   |-- glew.url

+    |   |   `-- slack-desc

+    |   |-- libdrm

+    |   |   |-- libdrm-2.4.33.tar.xz

+    |   |   |-- libdrm.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- liberation-fonts-ttf

+    |   |   |-- 60-liberation.conf

+    |   |   |-- doinst.sh.gz

+    |   |   |-- liberation-fonts-ttf-1.07.2.tar.gz

+    |   |   |-- liberation-fonts-ttf.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libhangul

+    |   |   |-- libhangul-0.1.0.tar.xz

+    |   |   |-- libhangul.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- m17n-lib

+    |   |   |-- m17n-db-1.6.1.tar.xz

+    |   |   |-- m17n-lib-1.6.1.tar.xz

+    |   |   |-- m17n-lib.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mesa

+    |   |   |-- MesaLib-8.0.4.tar.xz

+    |   |   |-- README.GIT

+    |   |   |-- get-mesa.sh

+    |   |   |-- mesa-demos-8.0.1.tar.xz

+    |   |   |-- mesa.SlackBuild

+    |   |   |-- mesa.url

+    |   |   |-- patches

+    |   |   `-- slack-desc

+    |   |-- mtdev

+    |   |   |-- mtdev-1.1.2.tar.xz

+    |   |   |-- mtdev.SlackBuild

+    |   |   |-- mtdev.url

+    |   |   `-- slack-desc

+    |   |-- sazanami-fonts-ttf

+    |   |   |-- sazanami-20040629.tar.bz2

+    |   |   |-- sazanami-fonts-ttf.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- scim

+    |   |   |-- scim-1.4.14.tar.xz

+    |   |   |-- scim-setup.desktop

+    |   |   |-- scim.SlackBuild

+    |   |   |-- scim.desktop

+    |   |   `-- slack-desc

+    |   |-- scim-anthy

+    |   |   |-- scim-anthy-1.2.4.tar.gz

+    |   |   |-- scim-anthy.SlackBuild

+    |   |   |-- scim-anthy.gcc43.diff.gz

+    |   |   `-- slack-desc

+    |   |-- scim-bridge

+    |   |   |-- patches

+    |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch.gz

+    |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-imcontext.cpp.patch.gz

+    |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent-imcontext.h.patch.gz

+    |   |   |   |-- scim-bridge-0.4.16-scim-bridge-agent.cpp.patch.gz

+    |   |   |   |-- scim-bridge-0.4.16-scim-bridge-client-imcontext-gtk.c.patch.gz

+    |   |   |   `-- scim-bridge-0.4.16-scim-bridge-client-imcontext-qt.cpp.patch.gz

+    |   |   |-- scim-bridge-0.4.16.tar.gz

+    |   |   |-- scim-bridge.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- scim-hangul

+    |   |   |-- scim-hangul-0.3.2.tar.gz

+    |   |   |-- scim-hangul.SlackBuild

+    |   |   |-- scim-hangul.gcc43.diff.gz

+    |   |   |-- scim-hangul.gcc47.diff.gz

+    |   |   `-- slack-desc

+    |   |-- scim-input-pad

+    |   |   |-- scim-input-pad-0.1.2.tar.bz2

+    |   |   |-- scim-input-pad.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- scim-m17n

+    |   |   |-- scim-m17n-0.2.3.tar.gz

+    |   |   |-- scim-m17n.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- scim-pinyin

+    |   |   |-- scim-pinyin-0.5.91.tar.gz

+    |   |   |-- scim-pinyin.SlackBuild

+    |   |   |-- scim-pinyin.gcc43.diff.gz

+    |   |   `-- slack-desc

+    |   |-- scim-tables

+    |   |   |-- scim-tables-0.5.9.tar.gz

+    |   |   |-- scim-tables.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- sinhala_lklug-font-ttf

+    |   |   |-- sinhala_lklug-font-ttf.SlackBuild

+    |   |   |-- sinhala_lklug.ttf

+    |   |   `-- slack-desc

+    |   |-- tibmachuni-font-ttf

+    |   |   |-- TibetanMachineUnicodeFont.zip

+    |   |   |-- slack-desc

+    |   |   `-- tibmachuni-font-ttf.SlackBuild

+    |   |-- ttf-indic-fonts

+    |   |   |-- COPYING.bz2

+    |   |   |-- Samyak_Malayalam.ttf.bz2

+    |   |   |-- Samyak_Malayalam.url

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- ttf-indic-fonts-0.4.7.4.tar.bz2

+    |   |   |-- ttf-indic-fonts.SlackBuild

+    |   |   `-- ttf-indic-fonts.copyright.diff.gz

+    |   |-- wqy-zenhei-font-ttf

+    |   |   |-- slack-desc

+    |   |   |-- wqy-zenhei-0.8.38-1.tar.bz2

+    |   |   `-- wqy-zenhei-font-ttf.SlackBuild

+    |   |-- x11

+    |   |   |-- arch.use.flags

+    |   |   |-- build

+    |   |   |   |-- gccmakedep

+    |   |   |   |-- libXaw3d

+    |   |   |   |-- xcb-proto

+    |   |   |   |-- xdm

+    |   |   |   |-- xf86-input-wacom

+    |   |   |   |-- xf86-video-apm

+    |   |   |   |-- xf86-video-chips

+    |   |   |   |-- xf86-video-i740

+    |   |   |   |-- xf86-video-s3

+    |   |   |   |-- xf86-video-sisusb

+    |   |   |   |-- xf86-video-tga

+    |   |   |   |-- xf86-video-tseng

+    |   |   |   |-- xf86-video-v4l

+    |   |   |   |-- xf86-video-voodoo

+    |   |   |   |-- xf86-video-xgi

+    |   |   |   |-- xorg-server

+    |   |   |   `-- xpyb

+    |   |   |-- configure

+    |   |   |   |-- compiz

+    |   |   |   |-- configure

+    |   |   |   |-- font-bh-ttf

+    |   |   |   |-- font-util

+    |   |   |   |-- gccmakedep

+    |   |   |   |-- libX11

+    |   |   |   |-- libXaw3d

+    |   |   |   |-- libXp

+    |   |   |   |-- libXt

+    |   |   |   |-- pixman

+    |   |   |   |-- setxkbmap

+    |   |   |   |-- xf86-input-vmmouse

+    |   |   |   |-- xf86-video-nouveau

+    |   |   |   |-- xfs

+    |   |   |   |-- xkbcomp

+    |   |   |   |-- xkeyboard-config

+    |   |   |   |-- xorg-docs

+    |   |   |   `-- xorg-server

+    |   |   |-- doinst.sh

+    |   |   |   |-- font-adobe-100dpi

+    |   |   |   |-- font-adobe-75dpi

+    |   |   |   |-- font-adobe-utopia-100dpi

+    |   |   |   |-- font-adobe-utopia-75dpi

+    |   |   |   |-- font-adobe-utopia-type1

+    |   |   |   |-- font-arabic-misc

+    |   |   |   |-- font-bh-100dpi

+    |   |   |   |-- font-bh-75dpi

+    |   |   |   |-- font-bh-lucidatypewriter-100dpi

+    |   |   |   |-- font-bh-lucidatypewriter-75dpi

+    |   |   |   |-- font-bh-ttf

+    |   |   |   |-- font-bh-type1

+    |   |   |   |-- font-bitstream-100dpi

+    |   |   |   |-- font-bitstream-75dpi

+    |   |   |   |-- font-bitstream-speedo

+    |   |   |   |-- font-bitstream-type1

+    |   |   |   |-- font-cronyx-cyrillic

+    |   |   |   |-- font-cursor-misc

+    |   |   |   |-- font-daewoo-misc

+    |   |   |   |-- font-dec-misc

+    |   |   |   |-- font-ibm-type1

+    |   |   |   |-- font-isas-misc

+    |   |   |   |-- font-jis-misc

+    |   |   |   |-- font-micro-misc

+    |   |   |   |-- font-misc-cyrillic

+    |   |   |   |-- font-misc-ethiopic

+    |   |   |   |-- font-misc-meltho

+    |   |   |   |-- font-misc-misc

+    |   |   |   |-- font-mutt-misc

+    |   |   |   |-- font-schumacher-misc

+    |   |   |   |-- font-screen-cyrillic

+    |   |   |   |-- font-sony-misc

+    |   |   |   |-- font-sun-misc

+    |   |   |   |-- font-winitzki-cyrillic

+    |   |   |   |-- font-xfree86-type1

+    |   |   |   |-- xdm

+    |   |   |   |-- xfs

+    |   |   |   |-- xinit

+    |   |   |   |-- xkeyboard-config

+    |   |   |   `-- xorg-cf-files

+    |   |   |-- makepkg

+    |   |   |   `-- xorg-server

+    |   |   |-- modularize

+    |   |   |-- noarch

+    |   |   |-- package-blacklist

+    |   |   |-- patch

+    |   |   |   |-- README

+    |   |   |   |-- xcompmgr

+    |   |   |   |   `-- xcompmgr-follow-icccm-spec.diff.gz

+    |   |   |   |-- xcompmgr.patch

+    |   |   |   |-- xf86-video-chips

+    |   |   |   |   |-- 0001-chips-gut-the-overlay-8-16-support-from-driver.patch

+    |   |   |   |   |-- 0002-PciTag-is-unused-when-using-libpciaccess.patch

+    |   |   |   |   |-- 0003-Use-malloc-calloc-realloc-free-directly.patch

+    |   |   |   |   |-- 0004-configure.ac-Remove-AM_PROG_CC_C_O.patch

+    |   |   |   |   |-- 0005-util-Consolidate-common-macros.patch

+    |   |   |   |   |-- 0006-Fix-implicit-declaration-of-iopl.patch

+    |   |   |   |   |-- 0007-Build-fix-for-ABI-Version-12.patch

+    |   |   |   |   |-- 0008-Fall-back-to-shadowfb-if-XAA-is-unavailable.patch

+    |   |   |   |   `-- 0009-Fix-for-new-vgaHW-ABI.patch

+    |   |   |   |-- xf86-video-chips.patch

+    |   |   |   |-- xorg-server

+    |   |   |   |   `-- x11.startwithblackscreen.diff.gz

+    |   |   |   `-- xorg-server.patch

+    |   |   |-- post-install

+    |   |   |   |-- beforelight.post-install

+    |   |   |   |-- encodings.post-install

+    |   |   |   |-- font-adobe-100dpi.post-install

+    |   |   |   |-- font-adobe-75dpi.post-install

+    |   |   |   |-- font-adobe-utopia-100dpi.post-install

+    |   |   |   |-- font-adobe-utopia-75dpi.post-install

+    |   |   |   |-- font-adobe-utopia-type1.post-install

+    |   |   |   |-- font-alias.post-install

+    |   |   |   |-- font-arabic-misc.post-install

+    |   |   |   |-- font-bh-100dpi.post-install

+    |   |   |   |-- font-bh-75dpi.post-install

+    |   |   |   |-- font-bh-lucidatypewriter-100dpi.post-install

+    |   |   |   |-- font-bh-lucidatypewriter-75dpi.post-install

+    |   |   |   |-- font-bh-ttf.post-install

+    |   |   |   |-- font-bh-type1.post-install

+    |   |   |   |-- font-bitstream-100dpi.post-install

+    |   |   |   |-- font-bitstream-75dpi.post-install

+    |   |   |   |-- font-bitstream-speedo.post-install

+    |   |   |   |-- font-bitstream-type1.post-install

+    |   |   |   |-- font-cronyx-cyrillic.post-install

+    |   |   |   |-- font-cursor-misc.post-install

+    |   |   |   |-- font-daewoo-misc.post-install

+    |   |   |   |-- font-dec-misc.post-install

+    |   |   |   |-- font-ibm-type1.post-install

+    |   |   |   |-- font-isas-misc.post-install

+    |   |   |   |-- font-jis-misc.post-install

+    |   |   |   |-- font-micro-misc.post-install

+    |   |   |   |-- font-misc-cyrillic.post-install

+    |   |   |   |-- font-misc-ethiopic.post-install

+    |   |   |   |-- font-misc-meltho.post-install

+    |   |   |   |-- font-misc-misc.post-install

+    |   |   |   |-- font-mutt-misc.post-install

+    |   |   |   |-- font-schumacher-misc.post-install

+    |   |   |   |-- font-screen-cyrillic.post-install

+    |   |   |   |-- font-sony-misc.post-install

+    |   |   |   |-- font-sun-misc.post-install

+    |   |   |   |-- font-util.post-install

+    |   |   |   |-- font-winitzki-cyrillic.post-install

+    |   |   |   |-- font-xfree86-type1.post-install

+    |   |   |   |-- libSM.post-install

+    |   |   |   |-- libX11

+    |   |   |   |   `-- XKeysymDB.gz

+    |   |   |   |-- libX11.post-install

+    |   |   |   |-- libXaw.post-install

+    |   |   |   |-- libXaw3d.post-install

+    |   |   |   |-- libpthread-stubs.post-install

+    |   |   |   |-- libxcb.post-install

+    |   |   |   |-- mkfontdir

+    |   |   |   |   `-- setup.04.mkfontdir

+    |   |   |   |-- mkfontdir.post-install

+    |   |   |   |-- pixman.post-install

+    |   |   |   |-- twm

+    |   |   |   |   `-- xinitrc.twm

+    |   |   |   |-- twm.post-install

+    |   |   |   |-- x11-app-test.post-install

+    |   |   |   |-- x11-font.post-install

+    |   |   |   |-- x11-util.post-install

+    |   |   |   |-- xbitmaps.post-install

+    |   |   |   |-- xcb-proto.post-install

+    |   |   |   |-- xcb-util.post-install

+    |   |   |   |-- xdm

+    |   |   |   |   |-- Xsession

+    |   |   |   |   |-- Xsession.orig

+    |   |   |   |   |-- Xsetup_0

+    |   |   |   |   `-- Xsetup_0.orig

+    |   |   |   |-- xdm.post-install

+    |   |   |   |-- xf86-input-joystick.post-install

+    |   |   |   |-- xf86-input-synaptics

+    |   |   |   |   `-- 50-synaptics.conf

+    |   |   |   |-- xf86-input-synaptics.post-install

+    |   |   |   |-- xf86-input-wacom

+    |   |   |   |   `-- 60-wacom.rules

+    |   |   |   |-- xf86-input-wacom.post-install

+    |   |   |   |-- xfs.post-install

+    |   |   |   |-- xinit

+    |   |   |   |   `-- README.Xmodmap

+    |   |   |   |-- xinit.post-install

+    |   |   |   |-- xkeyboard-config.post-install

+    |   |   |   |-- xorg-cf-files

+    |   |   |   |   `-- x11.tmpl.lib64.kludge.diff.gz

+    |   |   |   |-- xorg-cf-files.post-install

+    |   |   |   |-- xorg-server.post-install

+    |   |   |   |-- xorg-sgml-doctools.post-install

+    |   |   |   |-- xproto.post-install

+    |   |   |   `-- xsm.post-install

+    |   |   |-- slack-desc

+    |   |   |   |-- appres

+    |   |   |   |-- bdftopcf

+    |   |   |   |-- beforelight

+    |   |   |   |-- bigreqsproto

+    |   |   |   |-- bitmap

+    |   |   |   |-- compiz

+    |   |   |   |-- compositeproto

+    |   |   |   |-- damageproto

+    |   |   |   |-- dmxproto

+    |   |   |   |-- dri2proto

+    |   |   |   |-- editres

+    |   |   |   |-- encodings

+    |   |   |   |-- evieext

+    |   |   |   |-- fixesproto

+    |   |   |   |-- font-adobe-100dpi

+    |   |   |   |-- font-adobe-75dpi

+    |   |   |   |-- font-adobe-utopia-100dpi

+    |   |   |   |-- font-adobe-utopia-75dpi

+    |   |   |   |-- font-adobe-utopia-type1

+    |   |   |   |-- font-alias

+    |   |   |   |-- font-arabic-misc

+    |   |   |   |-- font-bh-100dpi

+    |   |   |   |-- font-bh-75dpi

+    |   |   |   |-- font-bh-lucidatypewriter-100dpi

+    |   |   |   |-- font-bh-lucidatypewriter-75dpi

+    |   |   |   |-- font-bh-ttf

+    |   |   |   |-- font-bh-type1

+    |   |   |   |-- font-bitstream-100dpi

+    |   |   |   |-- font-bitstream-75dpi

+    |   |   |   |-- font-bitstream-speedo

+    |   |   |   |-- font-bitstream-type1

+    |   |   |   |-- font-cronyx-cyrillic

+    |   |   |   |-- font-cursor-misc

+    |   |   |   |-- font-daewoo-misc

+    |   |   |   |-- font-dec-misc

+    |   |   |   |-- font-ibm-type1

+    |   |   |   |-- font-isas-misc

+    |   |   |   |-- font-jis-misc

+    |   |   |   |-- font-micro-misc

+    |   |   |   |-- font-misc-cyrillic

+    |   |   |   |-- font-misc-ethiopic

+    |   |   |   |-- font-misc-meltho

+    |   |   |   |-- font-misc-misc

+    |   |   |   |-- font-mutt-misc

+    |   |   |   |-- font-schumacher-misc

+    |   |   |   |-- font-screen-cyrillic

+    |   |   |   |-- font-sony-misc

+    |   |   |   |-- font-sun-misc

+    |   |   |   |-- font-util

+    |   |   |   |-- font-winitzki-cyrillic

+    |   |   |   |-- font-xfree86-type1

+    |   |   |   |-- fontcacheproto

+    |   |   |   |-- fontsproto

+    |   |   |   |-- fonttosfnt

+    |   |   |   |-- fslsfonts

+    |   |   |   |-- fstobdf

+    |   |   |   |-- gccmakedep

+    |   |   |   |-- glproto

+    |   |   |   |-- iceauth

+    |   |   |   |-- ico

+    |   |   |   |-- imake

+    |   |   |   |-- inputproto

+    |   |   |   |-- intel-gpu-tools

+    |   |   |   |-- kbproto

+    |   |   |   |-- libFS

+    |   |   |   |-- libICE

+    |   |   |   |-- libSM

+    |   |   |   |-- libX11

+    |   |   |   |-- libXScrnSaver

+    |   |   |   |-- libXau

+    |   |   |   |-- libXaw

+    |   |   |   |-- libXaw3d

+    |   |   |   |-- libXcm

+    |   |   |   |-- libXcomposite

+    |   |   |   |-- libXcursor

+    |   |   |   |-- libXdamage

+    |   |   |   |-- libXdmcp

+    |   |   |   |-- libXevie

+    |   |   |   |-- libXext

+    |   |   |   |-- libXfixes

+    |   |   |   |-- libXfont

+    |   |   |   |-- libXfontcache

+    |   |   |   |-- libXft

+    |   |   |   |-- libXi

+    |   |   |   |-- libXinerama

+    |   |   |   |-- libXmu

+    |   |   |   |-- libXp

+    |   |   |   |-- libXpm

+    |   |   |   |-- libXrandr

+    |   |   |   |-- libXrender

+    |   |   |   |-- libXres

+    |   |   |   |-- libXt

+    |   |   |   |-- libXtst

+    |   |   |   |-- libXv

+    |   |   |   |-- libXvMC

+    |   |   |   |-- libXxf86dga

+    |   |   |   |-- libXxf86misc

+    |   |   |   |-- libXxf86vm

+    |   |   |   |-- libdmx

+    |   |   |   |-- libfontenc

+    |   |   |   |-- libpciaccess

+    |   |   |   |-- libpthread-stubs

+    |   |   |   |-- libxcb

+    |   |   |   |-- libxkbfile

+    |   |   |   |-- listres

+    |   |   |   |-- lndir

+    |   |   |   |-- luit

+    |   |   |   |-- makedepend

+    |   |   |   |-- mkcomposecache

+    |   |   |   |-- mkfontdir

+    |   |   |   |-- mkfontscale

+    |   |   |   |-- oclock

+    |   |   |   |-- pixman

+    |   |   |   |-- printproto

+    |   |   |   |-- randrproto

+    |   |   |   |-- recordproto

+    |   |   |   |-- rendercheck

+    |   |   |   |-- renderproto

+    |   |   |   |-- resourceproto

+    |   |   |   |-- rgb

+    |   |   |   |-- scrnsaverproto

+    |   |   |   |-- sessreg

+    |   |   |   |-- setxkbmap

+    |   |   |   |-- showfont

+    |   |   |   |-- smproxy

+    |   |   |   |-- transset

+    |   |   |   |-- twm

+    |   |   |   |-- util-macros

+    |   |   |   |-- videoproto

+    |   |   |   |-- viewres

+    |   |   |   |-- x11perf

+    |   |   |   |-- xauth

+    |   |   |   |-- xbacklight

+    |   |   |   |-- xbiff

+    |   |   |   |-- xbitmaps

+    |   |   |   |-- xcalc

+    |   |   |   |-- xcb-proto

+    |   |   |   |-- xcb-util

+    |   |   |   |-- xcb-util-image

+    |   |   |   |-- xcb-util-keysyms

+    |   |   |   |-- xcb-util-renderutil

+    |   |   |   |-- xcb-util-wm

+    |   |   |   |-- xclipboard

+    |   |   |   |-- xclock

+    |   |   |   |-- xcmiscproto

+    |   |   |   |-- xcmsdb

+    |   |   |   |-- xcompmgr

+    |   |   |   |-- xconsole

+    |   |   |   |-- xcursor-themes

+    |   |   |   |-- xcursorgen

+    |   |   |   |-- xdbedizzy

+    |   |   |   |-- xditview

+    |   |   |   |-- xdm

+    |   |   |   |-- xdpyinfo

+    |   |   |   |-- xdriinfo

+    |   |   |   |-- xedit

+    |   |   |   |-- xev

+    |   |   |   |-- xextproto

+    |   |   |   |-- xeyes

+    |   |   |   |-- xf86-input-acecad

+    |   |   |   |-- xf86-input-aiptek

+    |   |   |   |-- xf86-input-evdev

+    |   |   |   |-- xf86-input-joystick

+    |   |   |   |-- xf86-input-keyboard

+    |   |   |   |-- xf86-input-mouse

+    |   |   |   |-- xf86-input-penmount

+    |   |   |   |-- xf86-input-synaptics

+    |   |   |   |-- xf86-input-vmmouse

+    |   |   |   |-- xf86-input-void

+    |   |   |   |-- xf86-input-wacom

+    |   |   |   |-- xf86-video-apm

+    |   |   |   |-- xf86-video-ark

+    |   |   |   |-- xf86-video-ast

+    |   |   |   |-- xf86-video-ati

+    |   |   |   |-- xf86-video-chips

+    |   |   |   |-- xf86-video-cirrus

+    |   |   |   |-- xf86-video-dummy

+    |   |   |   |-- xf86-video-fbdev

+    |   |   |   |-- xf86-video-geode

+    |   |   |   |-- xf86-video-glint

+    |   |   |   |-- xf86-video-i128

+    |   |   |   |-- xf86-video-i740

+    |   |   |   |-- xf86-video-intel

+    |   |   |   |-- xf86-video-mach64

+    |   |   |   |-- xf86-video-mga

+    |   |   |   |-- xf86-video-modesetting

+    |   |   |   |-- xf86-video-neomagic

+    |   |   |   |-- xf86-video-nouveau

+    |   |   |   |-- xf86-video-nv

+    |   |   |   |-- xf86-video-openchrome

+    |   |   |   |-- xf86-video-qxl

+    |   |   |   |-- xf86-video-r128

+    |   |   |   |-- xf86-video-rendition

+    |   |   |   |-- xf86-video-s3

+    |   |   |   |-- xf86-video-s3virge

+    |   |   |   |-- xf86-video-savage

+    |   |   |   |-- xf86-video-siliconmotion

+    |   |   |   |-- xf86-video-sis

+    |   |   |   |-- xf86-video-sisusb

+    |   |   |   |-- xf86-video-tdfx

+    |   |   |   |-- xf86-video-tga

+    |   |   |   |-- xf86-video-trident

+    |   |   |   |-- xf86-video-tseng

+    |   |   |   |-- xf86-video-v4l

+    |   |   |   |-- xf86-video-vesa

+    |   |   |   |-- xf86-video-vmware

+    |   |   |   |-- xf86-video-voodoo

+    |   |   |   |-- xf86-video-xgi

+    |   |   |   |-- xf86bigfontproto

+    |   |   |   |-- xf86dga

+    |   |   |   |-- xf86dgaproto

+    |   |   |   |-- xf86driproto

+    |   |   |   |-- xf86miscproto

+    |   |   |   |-- xf86vidmodeproto

+    |   |   |   |-- xfd

+    |   |   |   |-- xfontsel

+    |   |   |   |-- xfs

+    |   |   |   |-- xfsinfo

+    |   |   |   |-- xgamma

+    |   |   |   |-- xgc

+    |   |   |   |-- xhost

+    |   |   |   |-- xineramaproto

+    |   |   |   |-- xinit

+    |   |   |   |-- xinput

+    |   |   |   |-- xkbcomp

+    |   |   |   |-- xkbevd

+    |   |   |   |-- xkbprint

+    |   |   |   |-- xkbutils

+    |   |   |   |-- xkeyboard-config

+    |   |   |   |-- xkill

+    |   |   |   |-- xload

+    |   |   |   |-- xlogo

+    |   |   |   |-- xlsatoms

+    |   |   |   |-- xlsclients

+    |   |   |   |-- xlsfonts

+    |   |   |   |-- xmag

+    |   |   |   |-- xman

+    |   |   |   |-- xmessage

+    |   |   |   |-- xmh

+    |   |   |   |-- xmodmap

+    |   |   |   |-- xmore

+    |   |   |   |-- xorg-cf-files

+    |   |   |   |-- xorg-docs

+    |   |   |   |-- xorg-server

+    |   |   |   |-- xorg-server-xephyr

+    |   |   |   |-- xorg-server-xnest

+    |   |   |   |-- xorg-server-xvfb

+    |   |   |   |-- xorg-sgml-doctools

+    |   |   |   |-- xpr

+    |   |   |   |-- xprop

+    |   |   |   |-- xproto

+    |   |   |   |-- xpyb

+    |   |   |   |-- xrandr

+    |   |   |   |-- xrdb

+    |   |   |   |-- xrefresh

+    |   |   |   |-- xscope

+    |   |   |   |-- xset

+    |   |   |   |-- xsetroot

+    |   |   |   |-- xsm

+    |   |   |   |-- xstdcmap

+    |   |   |   |-- xtrans

+    |   |   |   |-- xvidtune

+    |   |   |   |-- xvinfo

+    |   |   |   |-- xwd

+    |   |   |   |-- xwininfo

+    |   |   |   `-- xwud

+    |   |   |-- src

+    |   |   |   |-- app

+    |   |   |   |   |-- appres-1.0.3.tar.xz

+    |   |   |   |   |-- bdftopcf-1.0.3.tar.xz

+    |   |   |   |   |-- beforelight-1.0.4.tar.xz

+    |   |   |   |   |-- bitmap-1.0.6.tar.xz

+    |   |   |   |   |-- compiz-0.8.8.tar.xz

+    |   |   |   |   |-- editres-1.0.5.tar.xz

+    |   |   |   |   |-- fonttosfnt-1.0.4.tar.xz

+    |   |   |   |   |-- fslsfonts-1.0.4.tar.xz

+    |   |   |   |   |-- fstobdf-1.0.5.tar.xz

+    |   |   |   |   |-- iceauth-1.0.5.tar.xz

+    |   |   |   |   |-- ico-1.0.3.tar.xz

+    |   |   |   |   |-- intel-gpu-tools-1.2.tar.xz

+    |   |   |   |   |-- listres-1.0.3.tar.xz

+    |   |   |   |   |-- luit-1.1.1.tar.xz

+    |   |   |   |   |-- mkcomposecache-1.2.1.tar.xz

+    |   |   |   |   |-- mkfontdir-1.0.7.tar.xz

+    |   |   |   |   |-- mkfontscale-1.1.0.tar.xz

+    |   |   |   |   |-- oclock-1.0.3.tar.xz

+    |   |   |   |   |-- rendercheck-1.4.tar.xz

+    |   |   |   |   |-- rgb-1.0.4.tar.xz

+    |   |   |   |   |-- sessreg-1.0.7.tar.xz

+    |   |   |   |   |-- setxkbmap-1.3.0.tar.xz

+    |   |   |   |   |-- showfont-1.0.3.tar.xz

+    |   |   |   |   |-- smproxy-1.0.5.tar.xz

+    |   |   |   |   |-- transset-1.0.0.tar.xz

+    |   |   |   |   |-- twm-1.0.7.tar.xz

+    |   |   |   |   |-- viewres-1.0.3.tar.xz

+    |   |   |   |   |-- x11perf-1.5.4.tar.xz

+    |   |   |   |   |-- xauth-1.0.7.tar.xz

+    |   |   |   |   |-- xbacklight-1.1.2.tar.xz

+    |   |   |   |   |-- xbiff-1.0.3.tar.xz

+    |   |   |   |   |-- xcalc-1.0.4.1.tar.xz

+    |   |   |   |   |-- xclipboard-1.1.2.tar.xz

+    |   |   |   |   |-- xclock-1.0.6.tar.xz

+    |   |   |   |   |-- xcmsdb-1.0.4.tar.xz

+    |   |   |   |   |-- xcompmgr-1.1.6.tar.xz

+    |   |   |   |   |-- xconsole-1.0.4.tar.xz

+    |   |   |   |   |-- xcursorgen-1.0.5.tar.xz

+    |   |   |   |   |-- xdbedizzy-1.1.0.tar.xz

+    |   |   |   |   |-- xditview-1.0.2.tar.xz

+    |   |   |   |   |-- xdm-1.1.11.tar.xz

+    |   |   |   |   |-- xdpyinfo-1.3.0.tar.xz

+    |   |   |   |   |-- xdriinfo-1.0.4.tar.xz

+    |   |   |   |   |-- xedit-1.2.0.tar.xz

+    |   |   |   |   |-- xev-1.2.0.tar.xz

+    |   |   |   |   |-- xeyes-1.1.1.tar.xz

+    |   |   |   |   |-- xf86dga-1.0.3.tar.xz

+    |   |   |   |   |-- xfd-1.1.1.tar.xz

+    |   |   |   |   |-- xfontsel-1.0.4.tar.xz

+    |   |   |   |   |-- xfs-1.1.2.tar.xz

+    |   |   |   |   |-- xfsinfo-1.0.3.tar.xz

+    |   |   |   |   |-- xgamma-1.0.5.tar.xz

+    |   |   |   |   |-- xgc-1.0.3.tar.xz

+    |   |   |   |   |-- xhost-1.0.5.tar.xz

+    |   |   |   |   |-- xinit-1.3.2.tar.xz

+    |   |   |   |   |-- xinput-1.6.0.tar.xz

+    |   |   |   |   |-- xkbcomp-1.2.4.tar.xz

+    |   |   |   |   |-- xkbevd-1.1.3.tar.xz

+    |   |   |   |   |-- xkbprint-1.0.3.tar.xz

+    |   |   |   |   |-- xkbutils-1.0.3.tar.xz

+    |   |   |   |   |-- xkill-1.0.3.tar.xz

+    |   |   |   |   |-- xload-1.1.1.tar.xz

+    |   |   |   |   |-- xlogo-1.0.4.tar.xz

+    |   |   |   |   |-- xlsatoms-1.1.1.tar.xz

+    |   |   |   |   |-- xlsclients-1.1.2.tar.xz

+    |   |   |   |   |-- xlsfonts-1.0.4.tar.xz

+    |   |   |   |   |-- xmag-1.0.4.tar.xz

+    |   |   |   |   |-- xman-1.1.2.tar.xz

+    |   |   |   |   |-- xmessage-1.0.3.tar.xz

+    |   |   |   |   |-- xmh-1.0.2.tar.xz

+    |   |   |   |   |-- xmodmap-1.0.7.tar.xz

+    |   |   |   |   |-- xmore-1.0.2.tar.xz

+    |   |   |   |   |-- xpr-1.0.4.tar.xz

+    |   |   |   |   |-- xprop-1.2.1.tar.xz

+    |   |   |   |   |-- xrandr-1.3.5.tar.xz

+    |   |   |   |   |-- xrdb-1.0.9.tar.xz

+    |   |   |   |   |-- xrefresh-1.0.4.tar.xz

+    |   |   |   |   |-- xscope-1.3.1.tar.xz

+    |   |   |   |   |-- xset-1.2.2.tar.xz

+    |   |   |   |   |-- xsetroot-1.1.0.tar.xz

+    |   |   |   |   |-- xsm-1.0.2.tar.xz

+    |   |   |   |   |-- xstdcmap-1.0.2.tar.xz

+    |   |   |   |   |-- xvidtune-1.0.2.tar.xz

+    |   |   |   |   |-- xvinfo-1.1.1.tar.xz

+    |   |   |   |   |-- xwd-1.0.5.tar.xz

+    |   |   |   |   |-- xwininfo-1.1.2.tar.xz

+    |   |   |   |   `-- xwud-1.0.4.tar.xz

+    |   |   |   |-- data

+    |   |   |   |   |-- xbitmaps-1.1.1.tar.xz

+    |   |   |   |   |-- xcursor-themes-1.0.3.tar.xz

+    |   |   |   |   `-- xkeyboard-config-2.6.tar.xz

+    |   |   |   |-- doc

+    |   |   |   |   |-- xorg-docs-1.7.tar.xz

+    |   |   |   |   `-- xorg-sgml-doctools-1.11.tar.xz

+    |   |   |   |-- driver

+    |   |   |   |   |-- pending

+    |   |   |   |   |   `-- xf86-video-ati-6.14.5.tar.xz

+    |   |   |   |   |-- xf86-input-acecad-1.5.0.tar.xz

+    |   |   |   |   |-- xf86-input-aiptek-1.4.1.tar.xz

+    |   |   |   |   |-- xf86-input-evdev-2.7.0.tar.xz

+    |   |   |   |   |-- xf86-input-joystick-1.6.1.tar.xz

+    |   |   |   |   |-- xf86-input-keyboard-1.6.1.tar.xz

+    |   |   |   |   |-- xf86-input-mouse-1.7.2.tar.xz

+    |   |   |   |   |-- xf86-input-penmount-1.5.0.tar.xz

+    |   |   |   |   |-- xf86-input-synaptics-1.6.2.tar.xz

+    |   |   |   |   |-- xf86-input-vmmouse-12.9.0.tar.xz

+    |   |   |   |   |-- xf86-input-void-1.4.0.tar.xz

+    |   |   |   |   |-- xf86-input-wacom-0.15.0.tar.xz

+    |   |   |   |   |-- xf86-video-apm-1.2.4.tar.xz

+    |   |   |   |   |-- xf86-video-ark-0.7.4.tar.xz

+    |   |   |   |   |-- xf86-video-ast-0.95.00.tar.xz

+    |   |   |   |   |-- xf86-video-ati-6.14.4.tar.xz

+    |   |   |   |   |-- xf86-video-chips-1.2.4.tar.xz

+    |   |   |   |   |-- xf86-video-cirrus-1.4.0.tar.xz

+    |   |   |   |   |-- xf86-video-dummy-0.3.5.tar.xz

+    |   |   |   |   |-- xf86-video-geode-2.11.13.tar.xz

+    |   |   |   |   |-- xf86-video-glint-1.2.7.tar.xz

+    |   |   |   |   |-- xf86-video-i128-1.3.5.tar.xz

+    |   |   |   |   |-- xf86-video-i740-1.3.3.tar.xz

+    |   |   |   |   |-- xf86-video-intel-2.19.0.tar.xz

+    |   |   |   |   |-- xf86-video-mach64-6.9.1.tar.xz

+    |   |   |   |   |-- xf86-video-mga-1.5.0.tar.xz

+    |   |   |   |   |-- xf86-video-modesetting-0.4.0.tar.xz

+    |   |   |   |   |-- xf86-video-neomagic-1.2.6.tar.xz

+    |   |   |   |   |-- xf86-video-nouveau-git_20120323_efd7a52.tar.xz

+    |   |   |   |   |-- xf86-video-nv-2.1.20.tar.xz

+    |   |   |   |   |-- xf86-video-openchrome-0.2.906.tar.xz

+    |   |   |   |   |-- xf86-video-r128-6.8.2.tar.xz

+    |   |   |   |   |-- xf86-video-rendition-4.2.4+.tar.xz

+    |   |   |   |   |-- xf86-video-s3-0.6.4.tar.xz

+    |   |   |   |   |-- xf86-video-s3virge-1.10.5.tar.xz

+    |   |   |   |   |-- xf86-video-savage-2.3.4.tar.xz

+    |   |   |   |   |-- xf86-video-siliconmotion-1.7.6.tar.xz

+    |   |   |   |   |-- xf86-video-sis-0.10.4.tar.xz

+    |   |   |   |   |-- xf86-video-sisusb-0.9.4.tar.xz

+    |   |   |   |   |-- xf86-video-tdfx-1.4.4.tar.xz

+    |   |   |   |   |-- xf86-video-tga-1.2.1.tar.xz

+    |   |   |   |   |-- xf86-video-trident-1.3.5.tar.xz

+    |   |   |   |   |-- xf86-video-tseng-1.2.4.tar.xz

+    |   |   |   |   |-- xf86-video-v4l-0.2.0.tar.xz

+    |   |   |   |   |-- xf86-video-vesa-2.3.1.tar.xz

+    |   |   |   |   |-- xf86-video-vmware-12.0.2.tar.xz

+    |   |   |   |   |-- xf86-video-voodoo-1.2.4.tar.xz

+    |   |   |   |   `-- xf86-video-xgi-1.6.0.tar.xz

+    |   |   |   |-- font

+    |   |   |   |   |-- encodings-1.0.4.tar.xz

+    |   |   |   |   |-- font-adobe-100dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-adobe-75dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-adobe-utopia-100dpi-1.0.4.tar.xz

+    |   |   |   |   |-- font-adobe-utopia-75dpi-1.0.4.tar.xz

+    |   |   |   |   |-- font-adobe-utopia-type1-1.0.4.tar.xz

+    |   |   |   |   |-- font-alias-1.0.3.tar.xz

+    |   |   |   |   |-- font-arabic-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-100dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-75dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-lucidatypewriter-100dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-lucidatypewriter-75dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-ttf-1.0.3.tar.xz

+    |   |   |   |   |-- font-bh-type1-1.0.3.tar.xz

+    |   |   |   |   |-- font-bitstream-100dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bitstream-75dpi-1.0.3.tar.xz

+    |   |   |   |   |-- font-bitstream-speedo-1.0.2.tar.xz

+    |   |   |   |   |-- font-bitstream-type1-1.0.3.tar.xz

+    |   |   |   |   |-- font-cronyx-cyrillic-1.0.3.tar.xz

+    |   |   |   |   |-- font-cursor-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-daewoo-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-dec-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-ibm-type1-1.0.3.tar.xz

+    |   |   |   |   |-- font-isas-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-jis-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-micro-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-misc-cyrillic-1.0.3.tar.xz

+    |   |   |   |   |-- font-misc-ethiopic-1.0.3.tar.xz

+    |   |   |   |   |-- font-misc-meltho-1.0.3.tar.xz

+    |   |   |   |   |-- font-misc-misc-1.1.2.tar.xz

+    |   |   |   |   |-- font-mutt-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-schumacher-misc-1.1.2.tar.xz

+    |   |   |   |   |-- font-screen-cyrillic-1.0.4.tar.xz

+    |   |   |   |   |-- font-sony-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-sun-misc-1.0.3.tar.xz

+    |   |   |   |   |-- font-util-1.3.0.tar.xz

+    |   |   |   |   |-- font-winitzki-cyrillic-1.0.3.tar.xz

+    |   |   |   |   `-- font-xfree86-type1-1.0.4.tar.xz

+    |   |   |   |-- get-xf86-video-nouveau.sh

+    |   |   |   |-- lib

+    |   |   |   |   |-- libFS-1.0.4.tar.xz

+    |   |   |   |   |-- libICE-1.0.8.tar.xz

+    |   |   |   |   |-- libSM-1.2.1.tar.xz

+    |   |   |   |   |-- libX11-1.5.0.tar.xz

+    |   |   |   |   |-- libXScrnSaver-1.2.2.tar.xz

+    |   |   |   |   |-- libXau-1.0.7.tar.xz

+    |   |   |   |   |-- libXaw-1.0.11.tar.xz

+    |   |   |   |   |-- libXaw3d-1.6.2.tar.xz

+    |   |   |   |   |-- libXcm-0.5.0.tar.xz

+    |   |   |   |   |-- libXcomposite-0.4.3.tar.xz

+    |   |   |   |   |-- libXcursor-1.1.13.tar.xz

+    |   |   |   |   |-- libXdamage-1.1.3.tar.xz

+    |   |   |   |   |-- libXdmcp-1.1.1.tar.xz

+    |   |   |   |   |-- libXevie-1.0.3.tar.xz

+    |   |   |   |   |-- libXext-1.3.1.tar.xz

+    |   |   |   |   |-- libXfixes-5.0.tar.xz

+    |   |   |   |   |-- libXfont-1.4.5.tar.xz

+    |   |   |   |   |-- libXfontcache-1.0.5.tar.xz

+    |   |   |   |   |-- libXft-2.3.1.tar.xz

+    |   |   |   |   |-- libXi-1.6.1.tar.xz

+    |   |   |   |   |-- libXinerama-1.1.2.tar.xz

+    |   |   |   |   |-- libXmu-1.1.1.tar.xz

+    |   |   |   |   |-- libXp-1.0.1.tar.xz

+    |   |   |   |   |-- libXpm-3.5.10.tar.xz

+    |   |   |   |   |-- libXrandr-1.3.2.tar.xz

+    |   |   |   |   |-- libXrender-0.9.7.tar.xz

+    |   |   |   |   |-- libXres-1.0.6.tar.xz

+    |   |   |   |   |-- libXt-1.1.3.tar.xz

+    |   |   |   |   |-- libXtst-1.2.1.tar.xz

+    |   |   |   |   |-- libXv-1.0.7.tar.xz

+    |   |   |   |   |-- libXvMC-1.0.7.tar.xz

+    |   |   |   |   |-- libXxf86dga-1.1.3.tar.xz

+    |   |   |   |   |-- libXxf86misc-1.0.3.tar.xz

+    |   |   |   |   |-- libXxf86vm-1.1.2.tar.xz

+    |   |   |   |   |-- libdmx-1.1.2.tar.xz

+    |   |   |   |   |-- libfontenc-1.1.1.tar.xz

+    |   |   |   |   |-- libpciaccess-0.13.1.tar.xz

+    |   |   |   |   |-- libxkbfile-1.0.8.tar.xz

+    |   |   |   |   |-- pixman-0.26.2.tar.xz

+    |   |   |   |   `-- xtrans-1.2.7.tar.xz

+    |   |   |   |-- proto

+    |   |   |   |   |-- bigreqsproto-1.1.2.tar.xz

+    |   |   |   |   |-- compositeproto-0.4.2.tar.xz

+    |   |   |   |   |-- damageproto-1.2.1.tar.xz

+    |   |   |   |   |-- dmxproto-2.3.1.tar.xz

+    |   |   |   |   |-- dri2proto-2.6.tar.xz

+    |   |   |   |   |-- evieext-1.1.1.tar.xz

+    |   |   |   |   |-- fixesproto-5.0.tar.xz

+    |   |   |   |   |-- fontcacheproto-0.1.3.tar.xz

+    |   |   |   |   |-- fontsproto-2.1.2.tar.xz

+    |   |   |   |   |-- glproto-1.4.15.tar.xz

+    |   |   |   |   |-- inputproto-2.2.tar.xz

+    |   |   |   |   |-- kbproto-1.0.6.tar.xz

+    |   |   |   |   |-- printproto-1.0.5.tar.xz

+    |   |   |   |   |-- randrproto-1.3.2.tar.xz

+    |   |   |   |   |-- recordproto-1.14.2.tar.xz

+    |   |   |   |   |-- renderproto-0.11.1.tar.xz

+    |   |   |   |   |-- resourceproto-1.2.0.tar.xz

+    |   |   |   |   |-- scrnsaverproto-1.2.2.tar.xz

+    |   |   |   |   |-- videoproto-2.3.1.tar.xz

+    |   |   |   |   |-- xcmiscproto-1.2.2.tar.xz

+    |   |   |   |   |-- xextproto-7.2.1.tar.xz

+    |   |   |   |   |-- xf86bigfontproto-1.2.0.tar.xz

+    |   |   |   |   |-- xf86dgaproto-2.1.tar.xz

+    |   |   |   |   |-- xf86driproto-2.1.1.tar.xz

+    |   |   |   |   |-- xf86miscproto-0.9.3.tar.xz

+    |   |   |   |   |-- xf86vidmodeproto-2.3.1.tar.xz

+    |   |   |   |   |-- xineramaproto-1.2.1.tar.xz

+    |   |   |   |   `-- xproto-7.0.23.tar.xz

+    |   |   |   |-- util

+    |   |   |   |   |-- gccmakedep-1.0.2.tar.xz

+    |   |   |   |   |-- imake-1.0.5.tar.xz

+    |   |   |   |   |-- lndir-1.0.3.tar.xz

+    |   |   |   |   |-- makedepend-1.0.4.tar.xz

+    |   |   |   |   |-- util-macros-1.17.tar.xz

+    |   |   |   |   `-- xorg-cf-files-1.0.4.tar.xz

+    |   |   |   |-- xcb

+    |   |   |   |   |-- libpthread-stubs-0.3.tar.xz

+    |   |   |   |   |-- libxcb-1.8.1.tar.xz

+    |   |   |   |   |-- xcb-proto-1.7.1.tar.xz

+    |   |   |   |   |-- xcb-util-0.3.8.tar.xz

+    |   |   |   |   |-- xcb-util-image-0.3.9.tar.xz

+    |   |   |   |   |-- xcb-util-keysyms-0.3.9.tar.xz

+    |   |   |   |   |-- xcb-util-renderutil-0.3.8.tar.xz

+    |   |   |   |   |-- xcb-util-wm-0.3.9.tar.xz

+    |   |   |   |   `-- xpyb-1.3.1.tar.xz

+    |   |   |   `-- xserver

+    |   |   |       `-- xorg-server-1.12.3.tar.xz

+    |   |   `-- x11.SlackBuild

+    |   |-- x11-skel

+    |   |   |-- doinst.sh.gz

+    |   |   |-- manpages

+    |   |   |   `-- xwmconfig.1

+    |   |   |-- scripts

+    |   |   |   |-- setup.xwmconfig

+    |   |   |   |-- xorg.conf-fbdev

+    |   |   |   |-- xorg.conf-vesa

+    |   |   |   |-- xorgsetup

+    |   |   |   `-- xwmconfig

+    |   |   |-- slack-desc

+    |   |   `-- x11-skel.SlackBuild

+    |   |-- xdg-user-dirs

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xdg-user-dirs-0.14.tar.xz

+    |   |   `-- xdg-user-dirs.SlackBuild

+    |   |-- xdg-utils

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xdg-utils-1.1.0-rc1.tar.bz2

+    |   |   |-- xdg-utils-cvs_checkout.sh

+    |   |   |-- xdg-utils.SlackBuild

+    |   |   `-- xdg-utils.info

+    |   `-- xterm

+    |       |-- doinst.sh.gz

+    |       |-- slack-desc

+    |       |-- xterm-281.tar.xz

+    |       `-- xterm.SlackBuild

+    |-- xap

+    |   |-- MPlayer

+    |   |   |-- Blue-1.8.tar.bz2

+    |   |   |-- MPlayer.SlackBuild

+    |   |   |-- MPlayer_nolibdvdcss-20120701.tar.xz

+    |   |   |-- ffmpeg-20120514.tar.xz

+    |   |   `-- slack-desc

+    |   |-- audacious

+    |   |   |-- audacious-3.3.1.tar.xz

+    |   |   |-- audacious.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- audacious-plugins

+    |   |   |-- audacious-plugins-3.3.1.tar.xz

+    |   |   |-- audacious-plugins.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- blackbox

+    |   |   |-- bbkeys-0.9.1.tar.xz

+    |   |   |-- blackbox-0.70.1-gcc-4.3.patch.gz

+    |   |   |-- blackbox-0.70.1.tar.xz

+    |   |   |-- blackbox.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- startblackbox.gz

+    |   |   |-- textpropertytostring-unconditional.diff.gz

+    |   |   `-- xinitrc.blackbox.gz

+    |   |-- blueman

+    |   |   |-- blueman-open

+    |   |   |-- blueman-r708.tar.xz

+    |   |   |-- blueman-use_blueman-open_for_obexfs.diff.gz

+    |   |   |-- blueman.SlackBuild

+    |   |   |-- doinst.sh.gz

+    |   |   `-- slack-desc

+    |   |-- electricsheep

+    |   |   |-- README.slackware

+    |   |   |-- electricsheep-20090306.tar.xz

+    |   |   |-- electricsheep.SlackBuild

+    |   |   |-- electricsheep.mplayer.diff.gz

+    |   |   |-- electricsheep_gnome-open.patch

+    |   |   `-- slack-desc

+    |   |-- fluxbox

+    |   |   |-- fluxbox-1.3.2.tar.xz

+    |   |   |-- fluxbox.SlackBuild

+    |   |   |-- fluxbox.startfluxbox.dbus.diff.gz

+    |   |   |-- slack-desc

+    |   |   `-- xinitrc.fluxbox.gz

+    |   |-- fvwm

+    |   |   |-- ancient-icons.tar.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- fvwm-2.6.5.tar.xz

+    |   |   |-- fvwm.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- startfvwm2.gz

+    |   |   `-- xinitrc.fvwm2.gz

+    |   |-- geeqie

+    |   |   |-- doinst.sh.gz

+    |   |   |-- geeqie-1.1.tar.xz

+    |   |   |-- geeqie.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gftp

+    |   |   |-- gftp-2.0.19.tar.bz2

+    |   |   |-- gftp.SlackBuild

+    |   |   |-- gftp.desktop.gz

+    |   |   `-- slack-desc

+    |   |-- gimp

+    |   |   |-- gimp-2.8.2.tar.xz

+    |   |   |-- gimp.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gkrellm

+    |   |   |-- gkrellm-2.3.5.tar.bz2

+    |   |   |-- gkrellm-countdown-0.1.1.tar.gz

+    |   |   |-- gkrellm.SlackBuild

+    |   |   |-- gkrellm.theme.defaults.diff.gz

+    |   |   `-- slack-desc

+    |   |-- gnuchess

+    |   |   |-- Sjeng-Free-11.2.tar.bz2

+    |   |   |-- chess.png

+    |   |   |-- eboard-1.1.1.tar.bz2

+    |   |   |-- eboard.assert.diff.gz

+    |   |   |-- eboard.desktop

+    |   |   |-- gnuchess-5.08.tar.xz

+    |   |   |-- gnuchess.SlackBuild

+    |   |   |-- slack-desc

+    |   |   |-- xboard-4.5.1.tar.xz

+    |   |   `-- xboard.desktop

+    |   |-- gnuplot

+    |   |   |-- gnuplot-4.6.0.tar.xz

+    |   |   |-- gnuplot.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gucharmap

+    |   |   |-- doinst.sh.gz

+    |   |   |-- gucharmap-3.4.1.tar.xz

+    |   |   |-- gucharmap.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gv

+    |   |   |-- gv-3.7.3.tar.xz

+    |   |   |-- gv.SlackBuild

+    |   |   |-- gv.libXaw3d.diff.gz

+    |   |   `-- slack-desc

+    |   |-- imagemagick

+    |   |   |-- ImageMagick-6.7.7-10.tar.xz

+    |   |   |-- imagemagick.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- mozilla-firefox

+    |   |   |-- firefox-15.0.1.source.tar.bz2

+    |   |   |-- firefox-15.0.1.source.tar.bz2.asc

+    |   |   |-- firefox.moz_plugin_path.diff.gz

+    |   |   |-- firefox.png

+    |   |   |-- mimeTypes.rdf.gz

+    |   |   |-- mozilla-firefox-mimeTypes-fix.diff.gz

+    |   |   |-- mozilla-firefox.SlackBuild

+    |   |   |-- mozilla-firefox.desktop

+    |   |   `-- slack-desc

+    |   |-- mozilla-thunderbird

+    |   |   |-- mozilla-firefox.xpcom_arm.patch.gz

+    |   |   |-- mozilla-thunderbird.SlackBuild

+    |   |   |-- mozilla-thunderbird.desktop

+    |   |   |-- slack-desc

+    |   |   |-- thunderbird-15.0.1.source.tar.bz2

+    |   |   |-- thunderbird-15.0.1.source.tar.bz2.asc

+    |   |   `-- thunderbird.png

+    |   |-- network-manager-applet

+    |   |   |-- doinst.sh.gz

+    |   |   |-- network-manager-applet-0.9.4.1.tar.xz

+    |   |   |-- network-manager-applet.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- pan

+    |   |   |-- pan-0.139.tar.xz

+    |   |   |-- pan.SlackBuild

+    |   |   |-- pan.gcc47.diff.gz

+    |   |   `-- slack-desc

+    |   |-- pidgin

+    |   |   |-- fix-gmain_h-compile-error.diff.gz

+    |   |   |-- pidgin-2.10.6.tar.xz

+    |   |   |-- pidgin-encryption-3.1.tar.gz

+    |   |   |-- pidgin.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rdesktop

+    |   |   |-- rdesktop-1.7.1.tar.xz

+    |   |   |-- rdesktop.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- rxvt

+    |   |   |-- rxvt-2.7.10.tar.bz2

+    |   |   |-- rxvt.SlackBuild

+    |   |   |-- rxvt.utempter.diff.gz

+    |   |   `-- slack-desc

+    |   |-- sane

+    |   |   |-- dll.conf.additions.gz

+    |   |   |-- doinst.sh.gz

+    |   |   |-- sane-backends-1.0.22-v4l.diff.gz

+    |   |   |-- sane-backends-1.0.22.tar.bz2

+    |   |   |-- sane-frontends-1.0.14-sane_cap_always_settable.diff.gz

+    |   |   |-- sane-frontends-1.0.14.tar.bz2

+    |   |   |-- sane.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- seamonkey

+    |   |   |-- doinst.sh.gz

+    |   |   |-- pkgconfig

+    |   |   |   |-- seamonkey-gtkmozembed.pc

+    |   |   |   |-- seamonkey-js.pc

+    |   |   |   |-- seamonkey-libxul.pc

+    |   |   |   |-- seamonkey-nspr.pc

+    |   |   |   |-- seamonkey-nss.pc

+    |   |   |   |-- seamonkey-plugin.pc

+    |   |   |   `-- seamonkey-xpcom.pc

+    |   |   |-- seamonkey-2.12.1.source.tar.xz

+    |   |   |-- seamonkey-icon.png

+    |   |   |-- seamonkey-mail-icon.png

+    |   |   |-- seamonkey-mail.desktop

+    |   |   |-- seamonkey.SlackBuild

+    |   |   |-- seamonkey.desktop

+    |   |   `-- slack-desc

+    |   |-- seyon

+    |   |   |-- seyon-2.20c.lsm

+    |   |   |-- seyon-2.20c.tar.gz

+    |   |   |-- seyon.SlackBuild

+    |   |   |-- seyon_2.20c-16.diff.gz

+    |   |   `-- slack-desc

+    |   |-- vim-gvim -> ../ap/vim

+    |   |-- windowmaker

+    |   |   |-- WindowMaker-0.95.3.tar.xz

+    |   |   |-- WindowMaker-extra-0.1.tar.xz

+    |   |   |-- WindowMaker.noopensusemenu.diff.gz

+    |   |   |-- slack-desc

+    |   |   |-- windowmaker.SlackBuild

+    |   |   |-- wmaker.inst.diff.gz

+    |   |   `-- xinitrc.wmaker.gz

+    |   |-- x11-ssh-askpass

+    |   |   |-- README

+    |   |   |-- slack-desc

+    |   |   |-- x11-ssh-askpass-1.2.4.1.tar.gz

+    |   |   |-- x11-ssh-askpass.SlackBuild

+    |   |   |-- x11-ssh-askpass.info

+    |   |   `-- xprofile.sample

+    |   |-- x3270

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- x3270-3.3.12ga7.tar.xz

+    |   |   `-- x3270.SlackBuild

+    |   |-- xaos

+    |   |   |-- slack-desc

+    |   |   |-- xaos-3.5.tar.xz

+    |   |   |-- xaos.6.gz

+    |   |   |-- xaos.SlackBuild

+    |   |   |-- xaos.desktop

+    |   |   `-- xaos.png

+    |   |-- xchat

+    |   |   |-- slack-desc

+    |   |   |-- xchat-2.8.8.tar.bz2

+    |   |   `-- xchat.SlackBuild

+    |   |-- xfractint

+    |   |   |-- palette.maps.tar.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfractint-20.04p11.tar.xz

+    |   |   `-- xfractint.SlackBuild

+    |   |-- xgames

+    |   |   |-- maze.diff.gz

+    |   |   |-- maze.tar.gz

+    |   |   |-- slack-desc

+    |   |   |-- spider.diff.gz

+    |   |   |-- spider.tar.gz

+    |   |   |-- xcolormap.diff.gz

+    |   |   |-- xcolormap.tar.gz

+    |   |   |-- xcuckoo-1.1.tar.gz

+    |   |   |-- xcuckoo.diff.gz

+    |   |   |-- xgames.SlackBuild

+    |   |   |-- xlander-2009-07-18.diff.gz

+    |   |   |-- xlander.fixes.diff.gz

+    |   |   |-- xlander.tar.gz

+    |   |   |-- xminesweep3.0.tar.gz

+    |   |   |-- xneko.tar.gz

+    |   |   |-- xroach.tar.gz

+    |   |   `-- xsnow-1.42.tar.gz

+    |   |-- xine-lib

+    |   |   |-- slack-desc

+    |   |   |-- xine-lib-1.1.21.tar.xz

+    |   |   |-- xine-lib.SlackBuild

+    |   |   `-- xine-lib.XvMClib.h.diff.gz

+    |   |-- xine-ui

+    |   |   |-- slack-desc

+    |   |   |-- xine-ui-0.99.6.tar.xz

+    |   |   |-- xine-ui.SlackBuild

+    |   |   |-- xine-ui.no.deprecated.curl.headers.diff.gz

+    |   |   `-- xine.desktop.gz

+    |   |-- xlockmore

+    |   |   |-- l-bob.README

+    |   |   |-- l-bob.xbm

+    |   |   |-- l-linux.xbm

+    |   |   |-- s-bob.xbm

+    |   |   |-- slack-desc

+    |   |   |-- xlockmore-5.39.tar.xz

+    |   |   |-- xlockmore.SlackBuild

+    |   |   `-- xlockmore.bitmap.diff.gz

+    |   |-- xmms

+    |   |   |-- slack-desc

+    |   |   |-- xmms-1.2.11.tar.bz2

+    |   |   |-- xmms.SlackBuild

+    |   |   |-- xmms.desktop

+    |   |   |-- xmms.gtk.doublesize.diff.gz

+    |   |   |-- xmms.png

+    |   |   `-- xmms.wmxmms_vis_depth_workaround.diff.gz

+    |   |-- xpaint

+    |   |   |-- slack-desc

+    |   |   |-- xpaint-2.8.16.tar.bz2

+    |   |   `-- xpaint.SlackBuild

+    |   |-- xpdf

+    |   |   |-- doinst.sh.gz

+    |   |   |-- lang

+    |   |   |   |-- xpdf-arabic.diff.gz

+    |   |   |   |-- xpdf-arabic.tar.gz

+    |   |   |   |-- xpdf-chinese-simplified.diff.gz

+    |   |   |   |-- xpdf-chinese-simplified.tar.gz

+    |   |   |   |-- xpdf-chinese-traditional.diff.gz

+    |   |   |   |-- xpdf-chinese-traditional.tar.gz

+    |   |   |   |-- xpdf-cyrillic.diff.gz

+    |   |   |   |-- xpdf-cyrillic.tar.gz

+    |   |   |   |-- xpdf-greek.diff.gz

+    |   |   |   |-- xpdf-greek.tar.gz

+    |   |   |   |-- xpdf-hebrew.diff.gz

+    |   |   |   |-- xpdf-hebrew.tar.gz

+    |   |   |   |-- xpdf-japanese.diff.gz

+    |   |   |   |-- xpdf-japanese.tar.gz

+    |   |   |   |-- xpdf-korean.diff.gz

+    |   |   |   |-- xpdf-korean.tar.gz

+    |   |   |   |-- xpdf-latin2.diff.gz

+    |   |   |   |-- xpdf-latin2.tar.gz

+    |   |   |   |-- xpdf-thai.diff.gz

+    |   |   |   |-- xpdf-thai.tar.gz

+    |   |   |   |-- xpdf-turkish.diff.gz

+    |   |   |   `-- xpdf-turkish.tar.gz

+    |   |   |-- patches

+    |   |   |   |-- 03-float.patch.gz

+    |   |   |   |-- xpdf-3.02pl1.patch

+    |   |   |   |-- xpdf-3.02pl1.patch.sig

+    |   |   |   |-- xpdf-3.02pl2.patch

+    |   |   |   |-- xpdf-3.02pl2.patch.sig

+    |   |   |   |-- xpdf-3.02pl3.patch

+    |   |   |   |-- xpdf-3.02pl3.patch.sig

+    |   |   |   |-- xpdf-3.02pl4.patch

+    |   |   |   |-- xpdf-3.02pl4.patch.sig

+    |   |   |   |-- xpdf-3.02pl5.patch

+    |   |   |   |-- xpdf-3.02pl5.patch.sig

+    |   |   |   |-- xpdf-3.02pl6.patch

+    |   |   |   |-- xpdf-3.02pl6.patch.sig

+    |   |   |   |-- xpdf-resizefix.diff.gz

+    |   |   |   |-- xpdf_3.02-1.3.diff.gz

+    |   |   |   `-- xpdfrc.diff.gz

+    |   |   |-- slack-desc

+    |   |   |-- xpdf-3.02.tar.gz

+    |   |   |-- xpdf-3.02.tar.gz.sig

+    |   |   |-- xpdf.SlackBuild

+    |   |   `-- xpdf.desktop

+    |   |-- xsane

+    |   |   |-- slack-desc

+    |   |   |-- xsane-0.998.tar.xz

+    |   |   `-- xsane.SlackBuild

+    |   |-- xscreensaver

+    |   |   |-- setuid.c.gz

+    |   |   |-- slack-desc

+    |   |   |-- xscreensaver-5.15.tar.xz

+    |   |   |-- xscreensaver-getimage-file-5.14

+    |   |   |-- xscreensaver.SlackBuild

+    |   |   |-- xscreensaver.electricsheep.diff.gz

+    |   |   `-- xscreensaver.setuid.diff.gz

+    |   |-- xv

+    |   |   |-- slack-desc

+    |   |   |-- xv-3.10.tar.xz

+    |   |   |-- xv-3.10a-enhancements.20070520-20081216.diff.bz2

+    |   |   |-- xv-3.10a-jumbo-README.txt

+    |   |   |-- xv-3.10a-jumbo-additions.diff.bz2

+    |   |   |-- xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2

+    |   |   |-- xv-3.10a.patch.gz

+    |   |   |-- xv.SlackBuild

+    |   |   |-- xv.jasper.diff.gz

+    |   |   |-- xv.prefix.diff.gz

+    |   |   `-- xv.prefix_x86_64.diff.gz

+    |   `-- xxgdb

+    |       |-- slack-desc

+    |       |-- xxgdb-1.08-glibc.patch.xz

+    |       |-- xxgdb-1.12-debian-filemenu.patch.xz

+    |       |-- xxgdb-1.12-debian-pty.patch.xz

+    |       |-- xxgdb-1.12-mandriva.patch.xz

+    |       |-- xxgdb-1.12-sysv.patch.xz

+    |       |-- xxgdb-1.12.tar.xz

+    |       `-- xxgdb.SlackBuild

+    |-- xfce

+    |   |-- Terminal

+    |   |   |-- Terminal-0.4.8.tar.xz

+    |   |   |-- Terminal.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- Thunar

+    |   |   |-- Thunar-1.4.0.tar.xz

+    |   |   |-- Thunar.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- exo

+    |   |   |-- exo-0.8.0.tar.xz

+    |   |   |-- exo.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- garcon

+    |   |   |-- garcon-0.2.0.tar.xz

+    |   |   |-- garcon.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- gtk-xfce-engine

+    |   |   |-- gtk-xfce-engine-3.0.0.tar.xz

+    |   |   |-- gtk-xfce-engine.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxfce4ui

+    |   |   |-- libxfce4ui-4.10.0.tar.xz

+    |   |   |-- libxfce4ui.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxfce4util

+    |   |   |-- libxfce4util-4.10.0.tar.xz

+    |   |   |-- libxfce4util.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- libxfcegui4

+    |   |   |-- libxfcegui4-4.10.0.tar.xz

+    |   |   |-- libxfcegui4.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- orage

+    |   |   |-- orage-4.8.3.tar.xz

+    |   |   |-- orage.SlackBuild

+    |   |   `-- slack-desc

+    |   |-- thunar-volman

+    |   |   |-- slack-desc

+    |   |   |-- thunar-volman-0.8.0.tar.xz

+    |   |   `-- thunar-volman.SlackBuild

+    |   |-- tumbler

+    |   |   |-- slack-desc

+    |   |   |-- tumbler-0.1.25.tar.xz

+    |   |   `-- tumbler.SlackBuild

+    |   |-- xfce-build-all.sh

+    |   |-- xfce4-appfinder

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-appfinder-4.10.0.tar.xz

+    |   |   `-- xfce4-appfinder.SlackBuild

+    |   |-- xfce4-clipman-plugin

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-clipman-plugin-1.2.3.tar.xz

+    |   |   |-- xfce4-clipman-plugin.SlackBuild

+    |   |   `-- xfce4-clipman-plugin.url

+    |   |-- xfce4-dev-tools

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-dev-tools-4.10.0.tar.xz

+    |   |   `-- xfce4-dev-tools.SlackBuild

+    |   |-- xfce4-mixer

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-mixer-4.8.0.tar.xz

+    |   |   `-- xfce4-mixer.SlackBuild

+    |   |-- xfce4-notifyd

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-notifyd-0.2.2.tar.xz

+    |   |   `-- xfce4-notifyd.SlackBuild

+    |   |-- xfce4-panel

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-panel-4.10.0.tar.xz

+    |   |   `-- xfce4-panel.SlackBuild

+    |   |-- xfce4-power-manager

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-power-manager-1.2.0.tar.xz

+    |   |   `-- xfce4-power-manager.SlackBuild

+    |   |-- xfce4-screenshooter

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-screenshooter-1.8.1.tar.xz

+    |   |   |-- xfce4-screenshooter.SlackBuild

+    |   |   `-- xfce4-screenshooter.url

+    |   |-- xfce4-session

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-session-4.10.0.tar.xz

+    |   |   `-- xfce4-session.SlackBuild

+    |   |-- xfce4-settings

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-settings-4.10.0.tar.xz

+    |   |   |-- xfce4-settings.SlackBuild

+    |   |   |-- xfce4-settings.theme.diff.gz

+    |   |   `-- xfce4-settings.xft.defaults.diff.gz

+    |   |-- xfce4-systemload-plugin

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-systemload-plugin-1.1.1.tar.xz

+    |   |   |-- xfce4-systemload-plugin.SlackBuild

+    |   |   `-- xfce4-systemload-plugin.url

+    |   |-- xfce4-taskmanager

+    |   |   |-- doinst.sh.gz

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-taskmanager-1.0.0.tar.xz

+    |   |   |-- xfce4-taskmanager.SlackBuild

+    |   |   `-- xfce4-taskmanager.url

+    |   |-- xfce4-volumed

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-volumed-0.1.13.tar.xz

+    |   |   `-- xfce4-volumed.SlackBuild

+    |   |-- xfce4-weather-plugin

+    |   |   |-- slack-desc

+    |   |   |-- xfce4-weather-plugin-0.8.1.tar.xz

+    |   |   |-- xfce4-weather-plugin.SlackBuild

+    |   |   `-- xfce4-weather-plugin.url

+    |   |-- xfconf

+    |   |   |-- slack-desc

+    |   |   |-- xfconf-4.10.0.tar.xz

+    |   |   `-- xfconf.SlackBuild

+    |   |-- xfdesktop

+    |   |   |-- slack-desc

+    |   |   |-- xfdesktop-4.10.0.tar.xz

+    |   |   `-- xfdesktop.SlackBuild

+    |   |-- xfwm4

+    |   |   |-- slack-desc

+    |   |   |-- xfwm4-4.10.0.tar.xz

+    |   |   |-- xfwm4.SlackBuild

+    |   |   `-- xinitrc.xfce

+    |   `-- xfwm4-themes

+    |       |-- slack-desc

+    |       |-- xfwm4-themes-4.10.0.tar.xz

+    |       `-- xfwm4-themes.SlackBuild

+    `-- y

+        `-- bsd-games

+            |-- bsd-games-2.13.lsm

+            |-- bsd-games-2.13.tar.bz2

+            |-- bsd-games-login-fortune.csh

+            |-- bsd-games-login-fortune.sh

+            |-- bsd-games.SlackBuild

+            |-- bsd-games.config.params.diff.gz

+            |-- bsd-games.fortlen.diff.gz

+            |-- bsd-games.fortunepath.diff.gz

+            |-- bsd-games.getline.diff.gz

+            |-- bsd-games.ospeed.diff.gz

+            |-- bsd-games.phantasia_install_fix.diff.gz

+            |-- bsd-games.pom.diff.gz

+            |-- bsd-games.strfile.8.diff.gz

+            |-- bsd-games.trek-gcc4.diff.gz

+            |-- fortune-fixes-sorry-no-additions-accepted-here

+            |   `-- 20120302.diff.gz

+            |-- fortunes-linuxcookie.tar.gz

+            |-- fortunes-o.tar.gz

+            |-- hangman-words.gz

+            `-- slack-desc

 

-874 directories, 8575 files

+862 directories, 5660 files

 

diff --git a/RELEASE_NOTES b/RELEASE_NOTES
index 53c67bef..99059a67 100644
--- a/RELEASE_NOTES
+++ b/RELEASE_NOTES
@@ -1,5 +1,5 @@
 
-Slackware 13.37 release notes.  Mon Apr 25 02:43:57 UTC 2011
+Slackware 14.0 release notes.  Wed Sep 19 21:47:07 UTC 2012
 
 Hi folks,
 
@@ -7,58 +7,75 @@ Hi folks,
 information, but once again Robby Workman has covered the important 
 technical details in CHANGES_AND_HINTS.TXT.  Thanks!
 
-    I'll mention a few technical items here.  Slackware's userspace does 
-require a recent 2.6.x kernel (I believe 2.6.27.x is a minimum for 
-udev), and as usual unless your needs are specific you're probably 
-better off running the included kernels that we've tested things 
-against. The best kernel to run (even on a one CPU/core machine) is the 
-generic SMP one, but that needs an initrd, so be sure to read the 
-instructions in /boot after installing with a huge* kernel if you plan 
-to switch. We have chosen to use the 2.6.37.6 kernel after testing the 
-2.6.37.x kernel branch extensively (and because there are still a few
-things that work in 2.6.37.x but not in 2.6.38.x).  But, for those who
-would like to run the latest kernel, there are 2.6.38.4 kernels included
-in /testing.  Also in the /testing/source/ directory you'll find config
-files for two other kernel versions, 2.6.35.12 (which is a longterm
-supported branch), and 2.6.39-rc4, a release candidate for
-the next major kernel series.
+    Linux has finally moved past 2.6.x versions (yay!) and already
+has several different maintained 3.x branches.  After extensive
+testing, we chose to ship this release with a kernel from the 3.2
+branch (3.2.29), which Ben Hutchings says will be maintained on
+kernel.org for an indefinite amount of time (probably at least 2 more
+years), making it a good choice for a production release.  As usual,
+the kernel is provided in two flavors, generic and huge.  The huge
+kernel contains enough built-in drivers that in most cases an initrd
+is not needed to boot the system.  The generic kernels require the
+use of an initrd to load the kernel modules needed to mount the root
+filesystem.  Using a generic kernel will save some memory and possibly
+avoid a few boot time warnings.  On the 32-bit side of things, there
+are both SMP (multiple processor capable) and non-SMP (single
+processor) kernels.  The non-SMP kernel is mostly intended for machines
+that can't run the SMP kernel, which is anything older than a Pentium
+III, and some models of the Pentium M that don't support PAE.  On
+32-bit, it is highly recommended to use the SMP kernel if your machine
+is able to boot with it (even if you have only a single core) because
+the optimization and memory handling options should yield better
+performance.
 
-    Slackware 13.37 contains updated versions of both KDE and Xfce, but
-if you prefer GNOME then you'll be pleased with the work that the
-GNOME SlackBuild (GSB) team is doing producing a full-featured GNOME
-desktop for Slackware:
+    If you'd like to try out some of the newer kernel branches, you'll
+find .config files for Linux 3.4.11, 3.5.4, and 3.6-rc4 in the
+/testing/source/ directory.
 
-    http://gnomeslackbuild.org
+    Slackware 14.0 contains updated versions of both KDE and Xfce, and
+both of these have been split as much as possible into their component
+packages rather than larger bundles.  This not only makes it easier to
+remove software that you don't need, but also makes it easier to
+maintain on our end.  If something needs a patch, it's a whole lot
+easier to issue a patch for only the affected item.  This saves storage
+space on the archive sites, and your time and bandwidth downloading
+the updates.
 
     Need more build scripts?  Something that you wanted wasn't included 
 in Slackware?  Well, then check out slackbuilds.org. Several of the team 
 members work on the scripts there.
 
+    There's a new community driven site for Slackware documentation,
+http://docs.slackware.com -- check it out, and join in to share your
+knowledge!
+
     Thanks to the rest of the team (and other contributors) for the 
 great help -- Eric Hameleers for major work on the KDE SC packages, init 
-scripts, installer, documentation, and all the extra packages like 
-multilib compilers (read more here: http://alien.slackbook.org/blog/), 
-Robby Workman for following X.Org, udev, wicd, xfce, and tons of other 
-projects, building and testing all that stuff, writing documentation, 
-his work with the team at slackbuilds.org, and lots of package upgrades 
-(like the switch to the bluez4 bluetooth stack), Piter Punk for udev and
-slackpkg work, Stuart Winter for more updates to linuxdoc-tools, slacktrack,
-and for all kinds of fixes throughout the installer and system (he finds my
-bugs all the time while porting packages to ARM for the ARMedslack port:
-http://www.armedslack.org/), Alan Hicks for testing the installer on Apple
-hardware, Vincent Batts for keeping Ruby working well (difficult!) and other
-miscellaneous fixes, Heinz Wiesinger for PHP (and other) fixes,
+scripts, installer, documentation (especially getting docs.slackware.com
+up and running), and all the extra packages like multilib compilers
+(read more here: http://alien.slackbook.org/blog/), Robby Workman for
+following X.Org, udev, NetworkManager, wicd, Xfce, and tons of other
+projects, building and testing all that stuff, writing documentation, his
+work with the team at slackbuilds.org, and lots of package upgrades,
+Piter Punk for slackpkg work, Stuart Winter for more updates to
+linuxdoc-tools, slacktrack, and for all kinds of fixes throughout the
+installer and system (he finds my bugs all the time while porting packages
+to ARM for the Slackware ARM port: http://www.armedslack.org/), Mark Post
+for his assistance porting our website to a newer PHP, Vincent Batts for
+keeping Ruby working well and other miscellaneous fixes, Heinz Wiesinger
+for working on PHP, mysql, icu4c, LLVM, and lots of other stuff,
 Amritpal Bath for various bugfixes and helping with release torrents, 
 mrgoblin for testing RAID, bluetooth, and well, everything (and fixing a 
-lot of it, too), other very honorable mentions go to Erik Jan Tromp, 
-Mark Post, Karl Magnus Kolstoe, Fred Emmott, and NetrixTardis, 
+lot of it, too), other very honorable mentions go to Alan Hicks,
+Erik Jan Tromp, Karl Magnus Kolstø, Fred Emmott, and NetrixTardis,
 and anyone else I'm forgetting (including the other team members who 
 contributed little fixes and suggestions here and there along with 
-general moral support), and all the folks who emailed in bug reports 
-(and especially fixes).  Thanks for the technical assistance (*you* make 
-this possible), and for keeping the project a good time.  And, of 
-course, thanks *much* to the upstream developers for such nice building 
-materials.  As always, thanks to my wife Andrea and daughter Briah.
+general moral support).  Special thanks to the folks who mailed in bug
+reports (and fixes) and helped collaborate on this release.  This was
+a stellar release cycle for community participation, especially on the
+LinuxQuestions.org Slackware forum.  Thanks for the help, for keeping
+this project fun, and making it possible for us to keep up with the
+rapid pace of Linux development.  Thanks to Honeypi and Doodle, too!
 
 Have fun!
 
diff --git a/UPGRADE.TXT b/UPGRADE.TXT
index 5508e11f..73b926bd 100644
--- a/UPGRADE.TXT
+++ b/UPGRADE.TXT
@@ -1,15 +1,12 @@
 

-Slackware 13.1 to 13.37 Upgrade HOWTO  <volkerdi@slackware.com>

+Slackware 13.37 to 14.0 Upgrade HOWTO  <volkerdi@slackware.com>

 

-This document explains how to upgrade from Slackware 13.1 to Slackware 13.37.

+This document explains how to upgrade from Slackware 13.37 to Slackware 14.0.

 

 ----------------------------------------------------------------------------

 

-For details of important changes from Slackware 13.1 to 13.37, see the file

+For details of important changes from Slackware 13.37 to 14.0, see the file

 'CHANGES_AND_HINTS.TXT'.  Thanks to Robby Workman for help with this.

-If you have partitions in /etc/fstab named /dev/hd*, please take special

-note of the instructions for the changeover to /dev/sd* devices or your

-machine will not reboot correctly.

 

 Before you begin, I would strongly recommend making a backup of your

 system, or, if not the entire system, at least the /etc directory.  You

@@ -18,7 +15,7 @@ process is complete. Back it up, or take your chances.
 

 OK, now that everything is safely backed up, let's proceed. :-)

 

-To do this, you'll need the Slackware 13.37 packages.  If these are on a CD,

+To do this, you'll need the Slackware 14.0 packages.  If these are on a CD,

 create a new directory to mount the CD on so that it doesn't get in the way

 during the upgrade:

 

@@ -44,7 +41,13 @@ is that you know where the slackware packages directory is.  We'll use
     uncover any problem areas and come up with workarounds for them.

 

 

-1.  Upgrade your package utilities and related tools:

+1.  Upgrade your glibc shared libraries.  This is important, or things

+    might go haywire during the next part of the upgrade:

+

+    upgradepkg /root/slackware/a/glibc-solibs-*.t?z

+

+

+2.  Upgrade your package utilities and related tools:

 

     upgradepkg /root/slackware/a/pkgtools-*.tgz

     upgradepkg /root/slackware/a/tar-*.tgz

@@ -52,12 +55,6 @@ is that you know where the slackware packages directory is.  We'll use
     upgradepkg /root/slackware/a/findutils-*.txz

 

 

-2.  Upgrade your glibc shared libraries.  This is important, or things

-    might go haywire during the next part of the upgrade:

-

-    upgradepkg /root/slackware/a/glibc-solibs-*.t?z

-

-

 3.  Upgrade everything else (and install new packages):

 

     upgradepkg --install-new /root/slackware/*/*.t?z

@@ -68,7 +65,7 @@ is that you know where the slackware packages directory is.  We'll use
     script in the "slackware" directory will do the trick:

 

     #!/bin/sh

-    for dir in a ap d e f k kde l n t tcl x xap y ; do

+    for dir in a ap d e f k kde l n t tcl x xap xfce y ; do

       ( cd $dir ; upgradepkg --install-new *.t?z )

     done

 

@@ -81,15 +78,17 @@ is that you know where the slackware packages directory is.  We'll use
 

     You may spot some old, obsolete, or discontinued packages.  If so,

     you can remove these using 'removepkg'.  This command will get rid of

-    the packages which became obsolete since Slackware 13.1:

-

-    removepkg util-linux-ng guidance-power-manager eggdbus iptraf \

-      libXTrap libXprintAppUtil libXprintUtil libxkbui rstart trapproto \

-      xf86rushproto xfindproxy xfwp xplsprinters xprehashprinterlist \

-      xproxymanagementprotocol xsetmode xsetpointer xtrap 

+    the packages which became obsolete since Slackware 13.37:

 

-    Note the removal of util-linux-ng!  You better make sure that the

-    renamed util-linux package is installed before removing that.  :-)

+    removepkg gdisk hal hal-info iwlwifi-100-ucode iwlwifi-1000-ucode \

+      iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode \

+      iwlwifi-5150-ucode iwlwifi-6000-ucode iwlwifi-6xxx-ucode \

+      jre kdeaccessibility kdebase kdebase-runtime kdebase-workspace \

+      kdebindings kdeedu kdegraphics kdeutils koffice konq-plugins \

+      kopete-cryptography module-init-tools ntfsprogs polkit-kde-1 \

+      radeon_ucode raptor rt2860-firmware rt2870-firmware rt61-firmware \

+      rt71w-firmware scripts wv2 xaw3d xf86-video-radeonhd \

+      xf86-video-sisusb xf86-video-tseng xf86-video-xgi xfce

 

 

 5.  Fix your config files.  Some of the config files in /etc are going to 

@@ -119,7 +118,7 @@ is that you know where the slackware packages directory is.  We'll use
 

     You might also wish to move these config files over:

 

-    /usr/man/man.conf.new

+    /usr/lib*/man.conf.new

     /usr/share/vim/vimrc.new

 

 

@@ -127,34 +126,39 @@ is that you know where the slackware packages directory is.  We'll use
     installed, then you may upgrade it by moving into the slackware/kdei

     directory and using this command:

 

-    upgradepkg --install-new k*<your KDE locale>*t?z

+    upgradepkg --install-new *-<your KDE locale>-*t?z

 

-    To have upgradepkg cycle through all of the available packages, and

-    see which ones need to be upgraded, use this in slackware/kdei:

+    The KOffice suite has been renamed to Calligra, so you'll need to

+    remove any old koffice-l10n package that remains:

 

-    upgradepkg *t?z

+    removepkg /var/log/packages/koffice-l10n*

 

-    If your language has been added to KDE since Slackware 13.1, you'll

+    If your language has been added to KDE since Slackware 13.37, you'll

     need to install it using installpkg, or upgradepkg --install-new.

    

     Typically you'll need to make sure that you have installed the

-    slackware/kdei packages for kde, koffice, and k3b (if you use those).

+    slackware/kdei packages for kde, calligra, and k3b (if you use those).

 

 

 7.  IMPORTANT!  *Before* attempting to reboot your system, you will need

     to make sure that the bootloader has been updated for the new kernel!

-    First, be sure your initrd is up to date (if you use one).  If you

-    use LILO, make sure the paths in /etc/lilo.conf point to a valid

+    First, be sure your initrd is up to date (if you use one).  You can

+    build a new initrd automatically by running the

+    mkinitrd_command_generator.sh script.

+

+    If you're running the 64-bit kernel, or the 32-bit single processor

+    kernel, this is the command to use:

+

+    /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 3.2.29 | bash

+

+    If you're using the 32-bit SMP kernel, use this command:

+

+    /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 3.2.29-smp | bash

+

+    If you use LILO, make sure the paths in /etc/lilo.conf point to a valid

     kernel and then type 'lilo' to reinstall LILO.  If you use a USB memory

     stick to boot, copy the new kernel to it in place of the old one.

 

-    If you were using devices such as /dev/hda (IDE hard drive) with

-    Slackware 13.1, you will need to consider how to switch over to the

-    new /dev/sda type device names.  See CHANGES_AND_HINTS.TXT for complete

-    instructions on how to do this.  If you have not read this yet, now

-    is a great time to go look at that.  Forget about step 8 and 9 and

-    just go complete that part of the upgrade and you'll be good to go.

-

 

 8.  Return to multi-user mode:

     telinit 3

@@ -163,7 +167,7 @@ is that you know where the slackware packages directory is.  We'll use
 9.  Reboot to start using the new kernel.

 

 

-At this point you should be running Slackware 13.37.  :-)

+At this point you should be running Slackware 14.0.  :-)

 

 I wish everyone good luck with this!

 

diff --git a/extra/google-chrome/README b/extra/google-chrome/README
index cf64c7b8..36be68d6 100644
--- a/extra/google-chrome/README
+++ b/extra/google-chrome/README
@@ -39,12 +39,7 @@ cd /tmp
 upgradepkg --install-new google-chrome-10.0.648.151-x86_64-1.txz
 
 
-Finally, please note that Google Chrome requires the GConf and ORBit2
-packages found in this directory in order to run.  Be careful with these
-as they may create unintended dependencies on GConf/ORBit2 in other
-software that you compile on machines where they are installed.
-
-Newer beta and unstable builds may also require the PAM library libpam.so.0.
+Finally, please note that Google Chrome requires the PAM library libpam.so.0.
 Installing the google-chrome-pam-solibs package in this directory will
 allow these newer versions of Chrome to run without having to actually
 switch the system to using PAM.  If you need real PAM (to compile Chromium
diff --git a/extra/google-chrome/google-chrome.SlackBuild b/extra/google-chrome/google-chrome.SlackBuild
index 16179d2a..de4c0b6f 100755
--- a/extra/google-chrome/google-chrome.SlackBuild
+++ b/extra/google-chrome/google-chrome.SlackBuild
@@ -24,7 +24,13 @@
 
 PKGNAM=google-chrome
 RELEASE=${RELEASE:-stable}    # stable, beta, or unstable
-case "$(uname -m)" in
+
+# Allow $ARCH to be preset before running the script.  This is useful in the
+# case where someone is running a 32-bit chroot environment under an x86_64
+# kernel:
+ARCH=${ARCH:-$(uname -m)}
+
+case "$ARCH" in
   i?86) DEBARCH="i386" ; LIBDIRSUFFIX="" ; ARCH=i386 ;;
   x86_64) DEBARCH="amd64" ; LIBDIRSUFFIX="64" ; ARCH=x86_64 ;;
   *) echo "Package for $(uname -m) architecture is not available." ; exit 1 ;;
diff --git a/extra/java b/extra/java
new file mode 120000
index 00000000..14c400e1
--- /dev/null
+++ b/extra/java
@@ -0,0 +1 @@
+source/java
\ No newline at end of file
diff --git a/extra/source/GConf/GConf.SlackBuild b/extra/source/GConf/GConf.SlackBuild
deleted file mode 100755
index f6e0627c..00000000
--- a/extra/source/GConf/GConf.SlackBuild
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for GConf
-
-# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
-# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=GConf
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --with-gtk=2.0 \
-  --disable-static \
-  --enable-debug=no \
-  --build=$ARCH-slackware-linux || exit 1
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mv $PKG/etc/gconf/2/path $PKG/etc/gconf/2/path.new
-mv $PKG/etc/gconf/2/evoldap.conf $PKG/etc/gconf/2/evoldap.conf.new
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a AUTHORS COPYING* NEWS README* TODO \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/extra/source/GConf/GConf.url b/extra/source/GConf/GConf.url
deleted file mode 100644
index 3fa6c986..00000000
--- a/extra/source/GConf/GConf.url
+++ /dev/null
@@ -1,2 +0,0 @@
-http://www.gnome.org/projects/gconf/
-ftp://ftp.gnome.org/pub/gnome/sources/GConf/2.32/GConf-2.32.0.tar.bz2
diff --git a/extra/source/GConf/doinst.sh b/extra/source/GConf/doinst.sh
deleted file mode 100644
index e4c115f3..00000000
--- a/extra/source/GConf/doinst.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config etc/gconf/2/path.new
-config etc/gconf/2/evoldap.conf.new
-
diff --git a/extra/source/GConf/slack-desc b/extra/source/GConf/slack-desc
deleted file mode 100644
index 1c6ce492..00000000
--- a/extra/source/GConf/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-     |-----handy-ruler-------------------------------------------------------|
-GConf: GConf (GNOME configuration library)
-GConf:
-GConf: GConf is a configuration database system, functionally similar to the
-GConf: Windows registry.
-GConf:
-GConf:
-GConf:
-GConf:
-GConf: Homepage:  http://www.gnome.org/projects/gconf/
-GConf:
-GConf:
diff --git a/extra/source/ORBit2/ORBit2.SlackBuild b/extra/source/ORBit2/ORBit2.SlackBuild
deleted file mode 100755
index 36ef40cc..00000000
--- a/extra/source/ORBit2/ORBit2.SlackBuild
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for ORBit2
-
-# Copyright 2010  Robby Workman, Northport, Alabama, USA
-# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=ORBit2
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --disable-static \
-  --build=$ARCH-slackware-linux || exit 1
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING* HACKING MAINTAINERS NEWS README* TODO \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/extra/source/ORBit2/ORBit2.url b/extra/source/ORBit2/ORBit2.url
deleted file mode 100644
index d51f9f0a..00000000
--- a/extra/source/ORBit2/ORBit2.url
+++ /dev/null
@@ -1,2 +0,0 @@
-http://www.gnome.org/projects/ORBit2/
-ftp://ftp.gnome.org/pub/gnome/sources/ORBit2/2.14/ORBit2-2.14.19.tar.bz2
diff --git a/extra/source/ORBit2/slack-desc b/extra/source/ORBit2/slack-desc
deleted file mode 100644
index 867444e8..00000000
--- a/extra/source/ORBit2/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-ORBit2: ORBit2 (CORBA ORB library)
-ORBit2:
-ORBit2: ORBit is a high-performance CORBA (Common Object Request Broker
-ORBit2: Architecture) ORB (object request broker).  It allows programs to
-ORBit2: send requests and receive replies from other programs, regardless
-ORBit2: of the locations of the two programs.  CORBA is an architecture that
-ORBit2: enables communication between program objects, regardless of the
-ORBit2: programming language they're written in or the operating system they
-ORBit2: run on.
-ORBit2:
-ORBit2:
diff --git a/extra/source/bash-completion/bash-completion.SlackBuild b/extra/source/bash-completion/bash-completion.SlackBuild
index d2e59446..5fa23f6c 100755
--- a/extra/source/bash-completion/bash-completion.SlackBuild
+++ b/extra/source/bash-completion/bash-completion.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,9 +22,9 @@
 
 # Slackware build script for bash-completion
 
-VERSION=1.3
+VERSION=2.0
 ARCH=noarch
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-2}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
@@ -46,6 +46,9 @@ find . \
 # Fixup sh completion for us
 zcat $CWD/fixup-sh-script-completions.diff.gz | patch -p1 --verbose || exit 1
 
+# Support the XFCE package set
+zcat $CWD/slackpkg-slapt-get-Update-the-list-of-package-sets.patch.gz | patch -p1 --verbose || exit 1
+
 ./configure \
   --prefix=/usr \
   --sysconfdir=/etc \
@@ -56,19 +59,8 @@ zcat $CWD/fixup-sh-script-completions.diff.gz | patch -p1 --verbose || exit 1
 make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-mkdir -p $PKG/etc/profile.d
-zcat $CWD/bash_completion.sh.gz > $PKG/etc/profile.d/bash_completion.sh
 chmod 0755 $PKG/etc/profile.d/bash_completion.sh
 
-# Sorry, but these contrib scripts have been causing a lot of problems.
-# If these are merged with upstream (and hopefully debugged) then we
-# will have them, but adding them at this level is IMHO a mistake.
-## https://github.com/GArik/bash-completion
-## GArik has a 'slackware' branch with quite a few enhancements
-#for i in pkgtools rpm2tgz sbopkg slackpkg slapt ; do
-#  cat $CWD/contrib/$i > $PKG/etc/bash_completion.d/$i ;
-#done
-
 mkdir -p $PKG/usr/doc/bash-completion-$VERSION
 cp -a \
   AUTHORS COPYING* README* TODO \
diff --git a/extra/source/bash-completion/bash_completion.sh b/extra/source/bash-completion/bash_completion.sh
deleted file mode 100644
index cb2adb67..00000000
--- a/extra/source/bash-completion/bash_completion.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-if [ "$(basename $SHELL)" = "bash" -a -f /etc/bash_completion ]; then
-  . /etc/bash_completion
-fi
diff --git a/extra/source/bash-completion/contrib/pkgtools b/extra/source/bash-completion/contrib/pkgtools
deleted file mode 100644
index 2b438efc..00000000
--- a/extra/source/bash-completion/contrib/pkgtools
+++ /dev/null
@@ -1,127 +0,0 @@
-# bash completion for Slackware Linux pkgtools
-
-[ -f /etc/slackware-version ] &&
-{
-
-have pkgtool &&
-_pkgtool()
-{
-    COMPREPLY=()
-    local cur="${COMP_WORDS[COMP_CWORD]}"
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '--sets --ignore-tagfiles --tagfile \
-            --source-mounted --source_dir --target_dir --source_device' \
-            -- "$cur" ) )
-        return 0
-    fi
-
-    local prev=${COMP_WORDS[COMP_CWORD-1]}
-
-    case $prev in
-        --source_dir|--target_dir)
-            _filedir -d
-            return 0
-            ;;
-        --sets)
-            # argument required but no completions available
-            return 0
-            ;;
-        --source_device)
-            COMPREPLY=( $( compgen -f -d -- "${cur:-/dev/}" ) )
-            return 0
-            ;;
-        --tagfile)
-            _filedir
-            return 0
-            ;;
-    esac
-} &&
-complete -F _pkgtool pkgtool
-
-have removepkg &&
-_removepkg()
-{
-    COMPREPLY=()
-    local cur=`_get_cword`
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '-copy -keep -preserve -warn' \
-            -- "$cur" ) )
-        return 0
-    fi
-
-    COMPREPLY=( $( cd /var/log/packages; compgen -f -- "$cur" ) )
-} &&
-complete -F _removepkg removepkg
-
-have upgradepkg &&
-_upgradepkg()
-{
-    COMPREPLY=()
-    local cur=`_get_cword`
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '--dry-run --install-new --reinstall \
-            --verbose' -- "$cur") )
-        return 0
-    fi
-
-    _filedir "t[bglx]z"
-} && complete -F _upgradepkg upgradepkg
-
-have installpkg &&
-_installpkg()
-{
-    COMPREPLY=()
-    local cur=`_get_cword`
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '--warn --md5sum --root --infobox --terse \
-            --menu --ask --priority --tagfile' -- "$cur") )
-        return 0
-    fi
-
-    local prev=`_get_pword`
-
-    case $prev in
-        --root)
-            _filedir -d
-            return 0
-            ;;
-        --priority)
-            COMPREPLY=( $( compgen -W 'ADD REC OPT SKP' -- "$cur" ) )
-            return 0
-            ;;
-        --tagfile)
-            _filedir
-            return 0
-            ;;
-    esac
-
-    _filedir "t[bglx]z"
-} && complete -F _installpkg installpkg
-
-have makepkg &&
-_makepkg()
-{
-    COMPREPLY=()
-    local cur=`_get_cword`
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '-l --linkadd -p --prepend \
-            -c --chown' -- "$cur") )
-        return 0
-    fi
-
-    local prev=`_get_pword`
-
-    case $prev in
-        -l|--linkadd|-c|--chown)
-            COMPREPLY=( $( compgen -W 'y n' -- "$cur" ) )
-            return 0
-            ;;
-    esac
-
-    _filedir
-} && complete -F _makepkg makepkg
-
-have explodepkg &&
-complete -o plusdirs -f -X '!*.t[bglx]z' explodepkg
-
-}
diff --git a/extra/source/bash-completion/contrib/rpm2tgz b/extra/source/bash-completion/contrib/rpm2tgz
deleted file mode 100644
index 23c70ac9..00000000
--- a/extra/source/bash-completion/contrib/rpm2tgz
+++ /dev/null
@@ -1,14 +0,0 @@
-# Slackware rpm2tgz completion.
-
-have rpm2tgz &&
-_rpm2tgz()
-{
-    COMPREPLY=()
-    local cur="${COMP_WORDS[COMP_CWORD]}"
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '-s -S -n -r -d -c' -- "$cur" ) )
-        return 0
-    fi
-
-    COMPREPLY=( $(compgen -f -X "!*.rpm" -- "$cur") )
-} && complete -F _rpm2tgz -o plusdirs rpm2tgz rpm2txz rpm2targz
diff --git a/extra/source/bash-completion/contrib/sbopkg b/extra/source/bash-completion/contrib/sbopkg
deleted file mode 100644
index 698fdf18..00000000
--- a/extra/source/bash-completion/contrib/sbopkg
+++ /dev/null
@@ -1,76 +0,0 @@
-# bash completion for sbopkg tool
-
-have sbopkg &&
-_sbopkg()
-{
-    COMPREPLY=()
-    local cur prev
-    _get_comp_words_by_ref cur prev
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '-b -c -d -e -f -g -h -i -k -l \
-                      -o -P -p -q -R -r -s -u -V -v' -- "$cur" ) )
-        return 0
-    fi
-
-    case $prev in
-        -e)
-            COMPREPLY=( $( compgen -W 'ask continue stop' -- "$cur" ) )
-            return 0
-            ;;
-        -f)
-            _filedir
-            return 0
-            ;;
-        -d)
-            _filedir -d
-            return 0
-            ;;
-        -V)
-            COMPREPLY=( $( compgen -W "? \
-                $(sbopkg -V ? 2>&1 | cut -s -f1)" -- "$cur" ) )
-            return 0
-            ;;
-        -i|-b)
-            ;;
-        *)
-            return 0
-            ;;
-    esac
-
-    local config="/etc/sbopkg/sbopkg.conf"
-    local words
-    _get_comp_words_by_ref words
-
-    for (( i=${#words[@]}-1; i>0; i-- )); do
-        if [[ "${words[i]}" == -f ]]; then
-            config="${words[i+1]}"
-            break
-        fi
-    done
-
-    if [ ! -r "$config" ]; then
-        return 0
-    fi
-
-    . $config
-
-    for (( i=1; i<${#words[@]}; i++ )); do
-        case "${words[i]}" in
-            -V)
-                REPO_NAME="${words[i+1]%%/*}"
-                REPO_BRANCH="${words[i+1]#*/}"
-                ;;
-            -d)
-                REPO_ROOT="${words[i+1]}"
-                ;;
-        esac
-    done
-
-    if [ ! -r "$REPO_ROOT/$REPO_NAME/$REPO_BRANCH/SLACKBUILDS.TXT" ]; then
-        return 0
-    fi
-    COMPREPLY=( $( sed -ne "/^SLACKBUILD NAME: $cur/{s/^SLACKBUILD NAME: //;p}"\
-        $REPO_ROOT/$REPO_NAME/$REPO_BRANCH/SLACKBUILDS.TXT )
-        $( cd $QUEUEDIR; compgen -f -X "!*.sqf"  -- "$cur" ) )
-} && complete -F _sbopkg sbopkg
diff --git a/extra/source/bash-completion/contrib/slackpkg b/extra/source/bash-completion/contrib/slackpkg
deleted file mode 100644
index 139e7edd..00000000
--- a/extra/source/bash-completion/contrib/slackpkg
+++ /dev/null
@@ -1,95 +0,0 @@
-# bash completion for slackpkg tool
-
-have slackpkg &&
-_slackpkg()
-{
-    COMPREPLY=()
-    local cur
-    _get_comp_words_by_ref cur
-
-    # based on `grep '\-.*\=.*)' /usr/sbin/slackpkg | cut -f1 -d\)`
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '-delall=on -delall=off \
-            -checkmd5=on -checkmd5=off \
-            -checkgpg=on -checkgpg=off \
-            -checksize=on -checksize=off \
-            -postinst=on -postinst=off \
-            -onoff=on -onoff=off \
-            -download_all=on -download_all=off \
-            -dialog=on -dialog=off \
-            -dialog_maxargs= \
-            -batch=on -batch=off \
-            -only_new_dotnew=on -only_new_dotnew=off \
-            -use_includes=on -use_includes=off \
-            -spinning=on -spinning=off \
-            -default_answer=yes -default_answer=no \
-            -mirror=' -- "$cur" ) )
-        return 0
-    fi
-
-    local confdir="/etc/slackpkg"
-    local config="$confdir/slackpkg.conf"
-
-    if [ ! -r "$config" ]; then
-        return 0
-    fi
-    . "$config"
-
-    local action words
-    _get_comp_words_by_ref -n "=" words
-
-    for (( i=1; i<${#words[@]}; i++ )); do
-        if [[ "${words[i]}" != -* ]]; then
-            action="${words[i]}"
-            break
-        fi
-    done
-
-    case $action in
-        generate-template|search|file-search)
-            # argument required but no completions available
-            return 0
-            ;;
-        install-template|remove-template)
-            if [ -e "$confdir/templates" ]; then
-                COMPREPLY=( $( cd "$confdir/templates"; \
-                    compgen -f -X "!*.template" -- "$cur" ) )
-                COMPREPLY=( ${COMPREPLY[@]%.template} )
-            fi
-            return 0
-            ;;
-        remove)
-            _filedir
-            COMPREPLY+=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x \
-                xap y' -- "$cur" ) )
-            COMPREPLY+=( $( cd /var/log/packages; compgen -f -- "$cur" ) )
-            return 0
-            ;;
-        install|reinstall|upgrade|blacklist|download)
-            _filedir
-            COMPREPLY+=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x \
-                xap y' -- "$cur" ) )
-            COMPREPLY+=( $( cut -f 6 -d\  ${WORKDIR}/pkglist 2> /dev/null | \
-                grep "^$cur" ) )
-            return 0
-            ;;
-        info)
-            COMPREPLY+=( $( cut -f 6 -d\  ${WORKDIR}/pkglist 2> /dev/null | \
-                grep "^$cur" ) )
-            return 0
-            ;;
-        update)
-            # we should complete the same as the next `list` + "gpg"
-            COMPREPLY=( $( compgen -W 'gpg' -- "$cur" ) )
-            ;&
-        *)
-            COMPREPLY+=( $( compgen -W 'install reinstall upgrade remove \
-                blacklist download update install-new upgrade-all \
-                clean-system new-config check-updates help generate-template \
-                install-template remove-template search file-search info' -- \
-                "$cur" ) )
-            return 0
-            ;;
-    esac
-
-} && complete -F _slackpkg slackpkg
diff --git a/extra/source/bash-completion/contrib/slapt b/extra/source/bash-completion/contrib/slapt
deleted file mode 100644
index 77946538..00000000
--- a/extra/source/bash-completion/contrib/slapt
+++ /dev/null
@@ -1,136 +0,0 @@
-# slapt-get and slapt-src completion
-
-have slapt-get &&
-_slapt_get()
-{
-    COMPREPLY=()
-    local cur prev
-    _get_comp_words_by_ref cur prev
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '--download-only -d --simulate -s \
-            --no-prompt -y --prompt -p --reinstall --ignore-excludes \
-            --no-md5 --ignore-dep --no-dep --print-uris --show-stats -S \
-            --config -c --remove-obsolete --retry --no-upgrade \
-            --update -u --upgrade --dist-upgrade --install -i --install-set \
-            --remove --show --filelist --search --list --available \
-            --installed --clean --autoclean --add-keys \
-            --version --help -h' -- "$cur" ) )
-        return 0
-    fi
-
-    case $prev in
-        --config|-c)
-            _filedir
-            return 0
-            ;;
-        --retry|--search)
-            # argument required but no completions available
-            return 0
-            ;;
-    esac
-
-    local words t
-    _get_comp_words_by_ref words
-
-    # search for last action (--install|--install-set|--remove|--show|--filelist)
-    for (( i=${#words[@]}-1; i>0; i-- )); do
-        if [[ ${words[i]} == -@(i|-install|-show) ]]; then
-            t="all"
-            break
-        elif [[ ${words[i]} == --install-set ]]; then
-            t="set"
-            break
-        elif [[ ${words[i]} == --@(remove|filelist) ]]; then
-            t="ins"
-            break
-        fi
-    done
-
-    case $t in
-        all) # --install|-i|--show
-            # slapt-get will fail to search for "^name-version"
-            # it can search for names only
-            local name=$( echo $cur | cut -f1 -d- )
-            COMPREPLY=( $( slapt-get --search "^$name" 2> /dev/null | \
-                sed -ne "/^$cur/{s/ .*$//;p}" ) )
-            return 0
-            ;;
-        ins) # --remove|--filelist
-            COMPREPLY=( $( cd /var/log/packages; compgen -f -- "$cur" ) )
-            return 0
-            ;;
-        set) # --install-set
-            COMPREPLY=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x \
-                xap y' -- "$cur" ) )
-            return 0
-            ;;
-    esac
-} && complete -F _slapt_get slapt-get
-
-have slapt-src &&
-_slapt_src()
-{
-    COMPREPLY=()
-    local cur prev
-    _get_comp_words_by_ref cur prev
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $( compgen -W '--update -u --list -l --clean -e \
-            --search -s --show -w --install -i --build -b --fetch -f \
-            --yes -y --config -c --no-dep -n --postprocess -p \
-            --version -v --help -h' -- "$cur" ) )
-        return 0
-    fi
-
-    case $prev in
-        --config|-c)
-            _filedir
-            return 0
-            ;;
-        --search|-s|--postprocess|-p)
-            # argument required but no completions available
-            return 0
-            ;;
-    esac
-
-    local words
-    _get_comp_words_by_ref words
-
-    local t
-    # search for last action (-i|-w|-b|-f)
-    for (( i=${#words[@]}-1; i>0; i-- )); do
-        if [[ ${words[i]} == -@(i|w|f|b|-install|-show|-build|-fetch) ]]; then
-            t="all"
-            break
-        fi
-    done
-    if [ "$t" != "all" ]; then
-        return 0
-    fi
-
-    local config="/etc/slapt-get/slapt-srcrc" # default config location
-    # search for config
-    for (( i=${#words[@]}-1; i>0; i-- )); do
-        if [[ ${words[i]} == -@(c|-config) ]]; then
-            config="${words[i+1]}"
-            break
-        fi
-    done
-    if [ ! -r "$config" ]; then
-        return 0
-    fi
-
-    local builddir=$( sed -ne "/^BUILDDIR=/{s/^BUILDDIR=//;p}" "$config" )
-    if [ ! -d "$builddir" ]; then
-        return 0
-    fi
-
-    local slck_data="${builddir}/slackbuilds_data"
-    if [ ! -r "$slck_data" ]; then
-        return 0
-    fi
-
-    COMPREPLY=( $( sed -ne \
-        "/^SLACKBUILD NAME: $cur/{s/^SLACKBUILD NAME: //;p}" "$slck_data" ) )
-} && complete -F _slapt_src slapt-src
diff --git a/extra/source/bash-completion/slackpkg-slapt-get-Update-the-list-of-package-sets.patch b/extra/source/bash-completion/slackpkg-slapt-get-Update-the-list-of-package-sets.patch
new file mode 100644
index 00000000..da7f08e6
--- /dev/null
+++ b/extra/source/bash-completion/slackpkg-slapt-get-Update-the-list-of-package-sets.patch
@@ -0,0 +1,48 @@
+From 371fb91b213c3bb4b86eb22e09701ec1be18b7dd Mon Sep 17 00:00:00 2001
+From: Igor Murzov <e-mail@date.by>
+Date: Wed, 25 Jul 2012 02:39:23 +0400
+Subject: [PATCH] slackpkg, slapt-get: Update the list of package sets.
+
+Xfce has its own package set in Slackware-14.0.
+---
+ completions/slackpkg  | 4 ++--
+ completions/slapt-get | 2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/completions/slackpkg b/completions/slackpkg
+index 1be2f95..dab9c6d 100644
+--- a/completions/slackpkg
++++ b/completions/slackpkg
+@@ -70,14 +70,14 @@ _slackpkg()
+         remove)
+             _filedir
+             COMPREPLY+=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x
+-                xap y' -- "$cur" ) )
++                xap xfce y' -- "$cur" ) )
+             COMPREPLY+=( $( cd /var/log/packages; compgen -f -- "$cur" ) )
+             return
+             ;;
+         install|reinstall|upgrade|blacklist|download)
+             _filedir
+             COMPREPLY+=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x
+-                xap y' -- "$cur" ) )
++                xap xfce y' -- "$cur" ) )
+             COMPREPLY+=( $( cut -f 6 -d\  "${WORKDIR}/pkglist" 2> /dev/null | \
+                 grep "^$cur" ) )
+             return
+diff --git a/completions/slapt-get b/completions/slapt-get
+index ff42660..93d110b 100644
+--- a/completions/slapt-get
++++ b/completions/slapt-get
+@@ -70,7 +70,7 @@ _slapt_get()
+             ;;
+         set) # --install-set
+             COMPREPLY=( $( compgen -W 'a ap d e f k kde kdei l n t tcl x
+-                xap y' -- "$cur" ) )
++                xap xfce y' -- "$cur" ) )
+             return
+             ;;
+     esac
+-- 
+1.7.11.1
+
diff --git a/extra/source/bittornado/bittornado.SlackBuild b/extra/source/bittornado/bittornado.SlackBuild
index e6551c63..6d6f94f5 100755
--- a/extra/source/bittornado/bittornado.SlackBuild
+++ b/extra/source/bittornado/bittornado.SlackBuild
@@ -4,7 +4,7 @@ PKG=/tmp/package-bittornado
 
 VERSION=0.3.18
 ARCH=noarch
-BUILD=2
+BUILD=3
 
 rm -rf $PKG
 mkdir -p $PKG
diff --git a/extra/source/bittorrent/bittorrent.SlackBuild b/extra/source/bittorrent/bittorrent.SlackBuild
index 5118d724..7bfc6a61 100755
--- a/extra/source/bittorrent/bittorrent.SlackBuild
+++ b/extra/source/bittorrent/bittorrent.SlackBuild
@@ -22,7 +22,7 @@
 
 VERSION=${VERSION:-4.4.0}
 ARCH=noarch
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
diff --git a/extra/source/brltty/brltty.SlackBuild b/extra/source/brltty/brltty.SlackBuild
index 31d6fc1f..513c0989 100755
--- a/extra/source/brltty/brltty.SlackBuild
+++ b/extra/source/brltty/brltty.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Copyright 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -30,7 +30,7 @@ if [ ! -d $TMP ]; then
 fi
 PKG=/tmp/package-brltty
 
-VERSION=4.2
+VERSION=4.4
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild b/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild
index e61ce917..48c7acea 100755
--- a/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild
+++ b/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2008, 2009, 2010  Eric Hameleers, Eindhoven, NL
+# Copyright 2008, 2009, 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -26,27 +26,50 @@
 # By:           Eric Hameleers <alien@slackware.com>
 # For:          flashplayer-plugin
 # Descr:        Adobe flash player plugin for mozilla
-# URL:          http://labs.adobe.com/technologies/flashplayer10/
+# URL:
+#   http://labs.adobe.com/technologies/flashplatformruntimes/flashplayer11/
 # Needs:        
 # Changelog:    
-# 10.0.d20.7-1: 16/Dec/2008 by Eric Hameleers <alien@slackware.com>
-#               * Initial build.
-# 10.0.d21.1-1: 20/Dec/2008 by Eric Hameleers <alien@slackware.com>
-#               * Update.
-# 10.0.22.87-1: 26/feb/2009 by Eric Hameleers <alien@slackware.com>
-#               * Update (plugs vulnerability).
-# 10.0.32.18-1: 10/aug/2009 by Patrick J. Volkerding <volkerdi@slackware.com>
-#               * Update (plugs vulnerability).
-# 10.0.42.34-1: 14/dec/2009 by Patrick J. Volkerding <volkerdi@slackware.com>
-#               * Update (plugs vulnerability).
-# 10.091510-1:  15/sep/2010 by Eric Hameleers <alien@slackware.com>
-#               * Preview1 of "flash player square".
-# 10.092710-1:  28/sep/2010 by Eric Hameleers <alien@slackware.com>
-#               * Preview2 of "flash player square".
-# 10_2.111710-1:28/sep/2010 by Eric Hameleers <alien@slackware.com>
-#               * New preview of "flash player square" for 64-bit Linux; there
-#                 is no more 32-bit "square" version, because new developments
-#                 are being folded into regular flashplayer10.
+# 10.0.d20.7-1:  16/Dec/2008 by Eric Hameleers <alien@slackware.com>
+#                * Initial build.
+# 10.0.d21.1-1:  20/Dec/2008 by Eric Hameleers <alien@slackware.com>
+#                * Update.
+# 10.0.22.87-1:  26/feb/2009 by Eric Hameleers <alien@slackware.com>
+#                * Update (plugs vulnerability).
+# 10.0.32.18-1:  10/aug/2009 by Patrick J. Volkerding <volkerdi@slackware.com>
+#                * Update (plugs vulnerability).
+# 10.0.42.34-1:  14/dec/2009 by Patrick J. Volkerding <volkerdi@slackware.com>
+#                * Update (plugs vulnerability).
+# 10.091510-1:   15/sep/2010 by Eric Hameleers <alien@slackware.com>
+#                * Preview1 of "flash player square".
+# 10.092710-1:   28/sep/2010 by Eric Hameleers <alien@slackware.com>
+#                * Preview2 of "flash player square".
+# 10_2.111710-1: 28/sep/2010 by Eric Hameleers <alien@slackware.com>
+#                * New preview of "flash player square" for 64-bit Linux; there
+#                  is no more 32-bit "square" version, because new developments
+#                  are being folded into regular flashplayer10.
+# 11b1.071311-1: 25/jul/2011 by Eric Hameleers <alien@slackware.com>
+#                * Update to version 11 beta 1.
+#                  Looks like 64-bit support has finally been folded into the
+#                  mainstream development of the plugin.
+# 11b1.080811-1: 12/aug/2011 by Eric Hameleers <alien@slackware.com>
+#                * Update to version 11 beta 2.
+# 11r1.090611-1: 11/sep/2011 by Eric Hameleers <alien@slackware.com>
+#                * Update to version 11 release candidate 1.
+# 11.0.1.152-1:  04/oct/2011 by Eric Hameleers <alien@slackware.com>
+#                * Update to stable release 11!
+# 11.1.102.55-1: 05/feb/2012 by Eric Hameleers <alien@slackware.com>
+#                * Update to release 11.1.
+# 11.1.102.62-1: 05/feb/2012 by Eric Hameleers <alien@slackware.com>
+#                * Minor update.
+# 11.2.202.228-1:29/mar/2012 by Eric Hameleers <alien@slackware.com>
+#                * Minor update.
+# 11.2.202.233-1:20/apr/2012 by Eric Hameleers <alien@slackware.com>
+#                * Minor update.
+# 11.2.202.235-1:05/may/2012 by Eric Hameleers <alien@slackware.com>
+#                * Minor update.
+# 11.2.202.236-1:19/jun/2012 by Eric Hameleers <alien@slackware.com>
+#                * Minor update.
 # 
 # Run 'sh flashplayer-plugin.SlackBuild' to build a Slackware package.
 # The package (.txz) and .txt file as well as build logs are created in /tmp .
@@ -57,10 +80,10 @@
 # Set initial variables:
 
 PRGNAM=flashplayer-plugin
-SRCVER=${SRCVER:-10_2}
-BLDVER=${BLDVER:-111710}
-VERSION=$SRCVER.$BLDVER
+VERSION=${VERSION:-"11.2.202.236"}
+MAJVER=$(echo $VERSION | cut -d. -f1)
 BUILD=${BUILD:-1}
+TAG=${TAG:-"alien"}
 
 # Where do we look for sources?
 SRCDIR=$(cd $(dirname $0); pwd)
@@ -72,7 +95,7 @@ OUTPUT=${OUTPUT:-/tmp}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
+    i?86) export ARCH=i386 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -81,12 +104,10 @@ fi
 
 case "$ARCH" in
   x86_64)
-    PREVER=${PREVER:-3}
     LIBDIRSUFFIX="64"
     ARCHBITS="64"
     ;;
   i?86)
-    PREVER=${PREVER:-2}
     LIBDIRSUFFIX=""
     ARCHBITS="32"
     ;;
@@ -96,8 +117,8 @@ case "$ARCH" in
     ;;
 esac
 
-SOURCE="$SRCDIR/flashplayer${SRCVER}_p${PREVER}_${ARCHBITS}bit_linux_${BLDVER}.tar.gz"
-SRCURL="http://download.macromedia.com/pub/labs/flashplayer10/flashplayer${SRCVER}_p${PREVER}_${ARCHBITS}bit_linux_${BLDVER}.tar.gz"
+SOURCE="$SRCDIR/install_flash_player_${VERSION}_linux.${ARCH}.tar.gz"
+SRCURL="http://fpdownload.macromedia.com/get/flashplayer/pdc/${VERSION}/install_flash_player_${MAJVER}_linux.${ARCH}.tar.gz"
 
 ##
 ## --- with a little luck, you won't have to edit below this point --- ##
@@ -110,6 +131,10 @@ trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
 set -u
 P1=${1:-1}
 
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
 # Create working directories:
 mkdir -p $OUTPUT          # place for the package to be saved
 mkdir -p $TMP/tmp-$PRGNAM # location to build the source
@@ -121,10 +146,11 @@ rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
 
 # Source file availability:
 if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
   if ! [ "x${SRCURL}" == "x" ]; then
-    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
-    [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
-    echo "Source '$(basename ${SOURCE})' not available yet..."
     echo "Will download file to $(dirname $SOURCE)"
     wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
     if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
@@ -149,7 +175,8 @@ echo "++"
 echo "|| $PRGNAM-$VERSION"
 echo "++"
 
-cd $TMP/tmp-$PRGNAM
+#cd $TMP/tmp-$PRGNAM
+cd $PKG
 echo "Extracting the source archive(s) for $PRGNAM..."
 tar -xvf ${SOURCE}
 chown -R root:root *
@@ -168,13 +195,34 @@ case "$ARCH" in
     ;;
 esac
 
-# Install the plugin to the package dir:
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-install -m 0755 libflashplayer.so \
-  $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins/libflashplayer.so
+## Move lib to lib64 if needed:
+#[ "$ARCH" = "x86_64" ] && mv usr/lib usr/lib${LIBDIRSUFFIX}
+
+# Install the plugin to the mozilla plugins dir and fix library file attributes:
+mkdir -p usr/lib${LIBDIRSUFFIX}/mozilla/plugins
+mv libflashplayer.so usr/lib${LIBDIRSUFFIX}/mozilla/plugins/
+find usr/lib${LIBDIRSUFFIX} -name "*.so" -exec chmod 755 {} \;
+
+# Add this to the doinst.sh:
+mkdir -p $PKG/install
+cat <<EOINS >> $PKG/install/doinst.sh
+# Update the desktop database:
+if [ -x usr/bin/update-desktop-database ]; then
+  chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1
+fi
+
+# Update hicolor theme cache:
+if [ -d usr/share/icons/hicolor ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+  fi
+fi
+
+EOINS
 
 # Add documentation:
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mv *.txt $PKG/usr/doc/$PRGNAM-$VERSION/ || true
 cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
@@ -185,9 +233,12 @@ cat $SRCDIR/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
 cd $OUTPUT
-md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz.md5
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz.md5
 cd -
-cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txt
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+
+# Restore the original umask:
+umask ${_UMASK_}
 
diff --git a/extra/source/fvwm-2.6.1/doinst.sh b/extra/source/fvwm-2.6.1/doinst.sh
deleted file mode 100644
index 087da9e3..00000000
--- a/extra/source/fvwm-2.6.1/doinst.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-config() {
-  NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-# Might need this later
-#config etc/X11/fvwm2/system.fvwm2rc.new
diff --git a/extra/source/fvwm-2.6.1/fvwm.SlackBuild b/extra/source/fvwm-2.6.1/fvwm.SlackBuild
deleted file mode 100755
index e7aa4fa6..00000000
--- a/extra/source/fvwm-2.6.1/fvwm.SlackBuild
+++ /dev/null
@@ -1,131 +0,0 @@
-#!/bin/sh
-
-# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=fvwm
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --disable-bidi \
-  --program-prefix= \
-  --program-suffix= \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Add a few more things:
-mkdir -p $PKG/etc/X11/xinit
-zcat $CWD/xinitrc.fvwm2.gz > $PKG/etc/X11/xinit/xinitrc.fvwm2
-chmod 755 $PKG/etc/X11/xinit/xinitrc.fvwm2
-#zcat $CWD/system.fvwm2rc.gz > $PKG/etc/system.fvwm2rc.new
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-# Restore a few original file timestamps:
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING* NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/extra/source/fvwm-2.6.1/slack-desc b/extra/source/fvwm-2.6.1/slack-desc
deleted file mode 100644
index 2d2a9ef5..00000000
--- a/extra/source/fvwm-2.6.1/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-fvwm: fvwm (a small and fast virtual window manager for X)
-fvwm:
-fvwm: Fvwm is the classic highly-configurable virtual window manager for
-fvwm: X11.  It is a derivative of twm, redesigned to minimize memory
-fvwm: consumption, provide a 3-D look to window frames, and provide a simple
-fvwm: virtual desktop.
-fvwm:
-fvwm: Homepage:  http://www.fvwm.org
-fvwm:
-fvwm:
-fvwm:
diff --git a/extra/source/fvwm-2.6.1/xinitrc.fvwm2 b/extra/source/fvwm-2.6.1/xinitrc.fvwm2
deleted file mode 100644
index 788a4e43..00000000
--- a/extra/source/fvwm-2.6.1/xinitrc.fvwm2
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-# $XConsortium: xinitrc.cpp,v 1.4 91/08/22 11:41:34 rws Exp $
-
-userresources=$HOME/.Xresources
-usermodmap=$HOME/.Xmodmap
-sysresources=/etc/X11/xinit/.Xresources
-sysmodmap=/etc/X11/xinit/.Xmodmap
-
-# merge in defaults and keymaps
-
-if [ -f $sysresources ]; then
-    xrdb -merge $sysresources
-fi
-
-if [ -f $sysmodmap ]; then
-    xmodmap $sysmodmap
-fi
-
-if [ -f $userresources ]; then
-    xrdb -merge $userresources
-fi
-
-if [ -f $usermodmap ]; then
-    xmodmap $usermodmap
-fi
-
-# start some nice programs
-
-xsetroot -solid SteelBlue
-if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
-  ck-launch-session fvwm2
-else
-  fvwm2
-fi
-
diff --git a/extra/source/java/README b/extra/source/java/README
new file mode 100644
index 00000000..4a812345
--- /dev/null
+++ b/extra/source/java/README
@@ -0,0 +1,17 @@
+This is a SlackBuild that will repackage Oracle Java into a package that
+can be easily installed, upgraded, or removed using Slackware's native
+package management tools.
+
+To use it, you'll need Oracle's JDK or JRE package for Linux.  Get the
+appropriate version for your architecture, either 32-bit i586 or 64-bit
+x64.  Be sure to get the version that is packaged as a .tar.gz!
+
+Then, run the script like this:
+
+./java.SlackBuild /tmp/jre-7u5-linux-x64.tar.gz
+
+A Slackware txz package will be created in /tmp.  Install or upgrade it
+with a command like this one (adjust for jdk or jre, arch, and version):
+
+upgradepkg --install-new jre-7u5-x86_64-1.txz
+
diff --git a/extra/source/java/java.SlackBuild b/extra/source/java/java.SlackBuild
new file mode 100755
index 00000000..80542817
--- /dev/null
+++ b/extra/source/java/java.SlackBuild
@@ -0,0 +1,167 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-java
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# If a Java archive was given as an argument to this script, use it.
+# Otherwise, we'll use an archive found in the current directory if
+# there is exactly one such archive.
+if [ ! "$1" = "" ]; then
+  if [ -r "$(readlink -f $1)" ]; then
+    SOURCETGZ="$(readlink -f $1)"
+  else
+    echo "Java source archive $1 was not found."
+    exit 1
+  fi
+else
+  SOURCETGZ="$CWD/j??-*.tar.gz"
+  if [ ! -r $SOURCETGZ ]; then
+    echo "No (or multiple) jdk-*.tar.gz found!"
+    echo "Please make sure there is exactly one JDK or JRE archive in this"
+    echo "directory and then run this script again, or else specify a Java"
+    echo "archive on the command line like this:"
+    echo "  ./java.SlackBuild /tmp/jdk-7u5-linux-x64.tar.gz"
+    exit 1
+  fi
+fi
+
+PKGNAM=$(basename $SOURCETGZ | cut -f 1 -d -)
+VERSION=$(basename $SOURCETGZ | cut -f 2 -d -)
+DVER=$(tar tf $SOURCETGZ | head -n 1 | cut -f 2 -d $(echo $PKGNAM | cut -b 3) | cut -f 1 -d /)
+JAVA_ARCH=$(basename $SOURCETGZ | cut -f 4 -d - | cut -f 1 -d .)
+if [ "$JAVA_ARCH" = "x64" ]; then
+  LIB_ARCH=amd64
+  ARCH=x86_64
+  LIBDIRSUFFIX="64"
+else
+  LIB_ARCH=i386
+  ARCH=i586
+  LIBDIRSUFFIX=""
+fi
+BUILD=${BUILD:-1}
+
+cd $PKG
+mkdir -p usr/lib${LIBDIRSUFFIX}
+cd usr/lib${LIBDIRSUFFIX}
+tar xf $SOURCETGZ || exit 1
+mkdir -p $PKG/etc/profile.d
+for file in $(ls $CWD/profile.d/${PKGNAM}*) ; do
+  cat $file | sed -e "s#lib/java#lib${LIBDIRSUFFIX}/java#" \
+    > $PKG/etc/profile.d/$(basename $file)
+done
+chown -R root.root $PKG
+find $PKG \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+chmod 755 $PKG/etc/profile.d/*
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  mv ${PKGNAM}${DVER} java || exit 1
+  ln -sf java ${PKGNAM}${DVER}
+) || exit 1
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
+( cd $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
+  if [ "$PKGNAM" = "jdk" ]; then
+    ln -sf /usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/libnpjp2.so libnpjp2.so
+  else
+    ln -sf /usr/lib${LIBDIRSUFFIX}/java/lib/${LIB_ARCH}/libnpjp2.so libnpjp2.so
+  fi
+)
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  if [ "$PKGNAM" = "jdk" ]; then
+    ln -sf ./java/jre/lib/${LIB_ARCH}/server/libjvm.so .
+  else
+    ln -sf ./java/lib/${LIB_ARCH}/server/libjvm.so .
+  fi
+)
+mkdir -p $PKG/install
+cat $CWD/slack-desc.${PKGNAM} > $PKG/install/slack-desc
+cat << EOF > $PKG/install/doinst.sh
+# Clean up a potential upgrade mess caused by changing the
+# installation directory to /usr/lib${LIBDIRSUFFIX}/java/:
+if [ -L usr/lib${LIBDIRSUFFIX}/java ]; then
+  rm -rf usr/lib${LIBDIRSUFFIX}/java
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/man
+EOF
+if [ "$PKGNAM" = "jdk" ]; then
+cat << EOF >> $PKG/install/doinst.sh
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/server
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/client
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/javaws
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/bin
+EOF
+else
+cat << EOF >> $PKG/install/doinst.sh
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/lib/${LIB_ARCH}/server
+  mkdir -p usr/lib/java/lib${LIBDIRSUFFIX}/${LIB_ARCH}/client
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/javaws
+EOF
+fi
+cat << EOF >> $PKG/install/doinst.sh
+  mkdir -p usr/lib${LIBDIRSUFFIX}/java/bin
+  mkdir -p usr/lib${LIBDIRSUFFIX}/mozilla/plugins
+fi
+if [ -L ControlPanel ]; then
+  rm -f ControlPanel
+fi
+if [ -L ja ]; then
+  rm -f ja
+fi
+if [ -L javaws ]; then
+  rm -f javaws
+fi
+if [ -L libjsig.so ]; then
+  rm -f libjsig.so
+fi
+# End cleanup.
+
+EOF
+
+# Install the desktop/mime files:
+mkdir -p $PKG/usr/share/{applications,icons,mime}
+if [ "$PKGNAM" = "jdk" ]; then
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/applications/* \
+    $PKG/usr/share/applications/
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/icons/hicolor \
+    $PKG/usr/share/icons/
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/mime/packages \
+    $PKG/usr/share/mime/
+else
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/applications/* \
+    $PKG/usr/share/applications/
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/icons/hicolor \
+    $PKG/usr/share/icons/
+  cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/mime/packages \
+    $PKG/usr/share/mime/
+fi
+
+# Java may not expect compressed manpages, so don't compress them.
+
+cd $PKG
+rm -f $TMP/${PKGNAM}-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
+
diff --git a/extra/source/jdk-6/profile.d/jdk.csh b/extra/source/java/profile.d/jdk.csh
index 3a1ec7be..3a1ec7be 100755
--- a/extra/source/jdk-6/profile.d/jdk.csh
+++ b/extra/source/java/profile.d/jdk.csh
diff --git a/extra/source/jdk-6/profile.d/jdk.sh b/extra/source/java/profile.d/jdk.sh
index ed0bc73d..ed0bc73d 100755
--- a/extra/source/jdk-6/profile.d/jdk.sh
+++ b/extra/source/java/profile.d/jdk.sh
diff --git a/source/local/jre/profile.d/jre.csh b/extra/source/java/profile.d/jre.csh
index 2beb66ec..2beb66ec 100755
--- a/source/local/jre/profile.d/jre.csh
+++ b/extra/source/java/profile.d/jre.csh
diff --git a/source/local/jre/profile.d/jre.sh b/extra/source/java/profile.d/jre.sh
index 227c15cb..227c15cb 100755
--- a/source/local/jre/profile.d/jre.sh
+++ b/extra/source/java/profile.d/jre.sh
diff --git a/extra/source/jdk-6/slack-desc b/extra/source/java/slack-desc.jdk
index 57dfb7e0..57dfb7e0 100644
--- a/extra/source/jdk-6/slack-desc
+++ b/extra/source/java/slack-desc.jdk
diff --git a/extra/source/java/slack-desc.jre b/extra/source/java/slack-desc.jre
new file mode 100644
index 00000000..643ff763
--- /dev/null
+++ b/extra/source/java/slack-desc.jre
@@ -0,0 +1,18 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+   |-----handy-ruler------------------------------------------------------|
+jre: Java(TM) 2 Platform Standard Edition Runtime Environment.
+jre:
+jre: The J2SE(TM) Runtime Environment (JRE) is intended for software
+jre: developers and vendors to redistribute with their applications.
+jre: It contains the Java virtual machine, runtime class libraries, and
+jre: Java application launcher that are necessary to run programs written
+jre: in the Java programming language.
+jre:
+jre:
+jre:
+jre:
diff --git a/extra/source/jdk-6/COPYRIGHT b/extra/source/jdk-6/COPYRIGHT
deleted file mode 100644
index fcb67309..00000000
--- a/extra/source/jdk-6/COPYRIGHT
+++ /dev/null
@@ -1,70 +0,0 @@
-Copyright © 2006, 2011, Oracle and/or its affiliates. 
-All rights reserved.
-
-This software and related documentation are provided under a
-license agreement containing restrictions on use and
-disclosure and are protected by intellectual property laws.
-Except as expressly permitted in your license agreement or
-allowed by law, you may not use, copy, reproduce, translate,
-broadcast, modify, license, transmit, distribute, exhibit,
-perform, publish, or display any part, in any form, or by
-any means.  Reverse engineering, disassembly, or
-decompilation of this software, unless required by law for
-interoperability, is prohibited.
-
-The information contained herein is subject to change
-without notice and is not warranted to be error-free.  If
-you find any errors, please report them to us in writing.
-
-If this is software or related software documentation that
-is delivered to the U.S.  Government or anyone licensing it
-on behalf of the U.S.  Government, the following notice is
-applicable:
-
-U.S.  GOVERNMENT RIGHTS Programs, software, databases, and
-related documentation and technical data delivered to U.S.
-Government customers are "commercial computer software" or
-"commercial technical data" pursuant to the applicable
-Federal Acquisition Regulation and agency-specific
-supplemental regulations.  As such, the use, duplication,
-disclosure, modification, and adaptation shall be subject to
-the restrictions and license terms set forth in the
-applicable Government contract, and, to the extent
-applicable by the terms of the Government contract, the
-additional rights set forth in FAR 52.227-19, Commercial
-Computer Software License (December 2007).  Oracle America,
-Inc., 500 Oracle Parkway, Redwood City, CA 94065.
-
-This software or hardware is developed for general use in a
-variety of information management applications.  It is not
-developed or intended for use in any inherently dangerous
-applications, including applications which may create a risk
-of personal injury.  If you use this software or hardware in
-dangerous applications, then you shall be responsible to
-take all appropriate fail-safe, backup, redundancy, and
-other measures to ensure its safe use.  Oracle Corporation
-and its affiliates disclaim any liability for any damages
-caused by use of this software or hardware in dangerous
-applications.
-
-Oracle and Java are registered trademarks of Oracle and/or
-its affiliates.  Other names may be trademarks of their
-respective owners.
-
-AMD, Opteron, the AMD logo, and the AMD Opteron logo are
-trademarks or registered trademarks of Advanced Micro
-Devices.  Intel and Intel Xeon are trademarks or registered
-trademarks of Intel Corporation.  All SPARC trademarks are
-used under license and are trademarks or registered
-trademarks of SPARC International, Inc.  UNIX is a
-registered trademark licensed through X/Open Company, Ltd.
-
-This software or hardware and documentation may provide
-access to or information on content, products, and services
-from third parties.  Oracle Corporation and its affiliates
-are not responsible for and expressly disclaim all
-warranties of any kind with respect to third-party content,
-products, and services.  Oracle Corporation and its
-affiliates will not be responsible for any loss, costs, or
-damages incurred due to your access to or use of third-party
-content, products, or services.
diff --git a/extra/source/jdk-6/HOWTO-BUILD-TXZ b/extra/source/jdk-6/HOWTO-BUILD-TXZ
deleted file mode 100644
index 90a572b5..00000000
--- a/extra/source/jdk-6/HOWTO-BUILD-TXZ
+++ /dev/null
@@ -1,9 +0,0 @@
-1.  Download the file jdk-6u*-linux-i586.bin from
-    java.com and put it in the directory.
-
-2.  Run jdk.SlackBuild to package it as an installable
-    .txz package.
-
-Newer (or older) versions may be packaged by editing the
-version number in jdk.SlackBuild first.
-
diff --git a/extra/source/jdk-6/LICENSE b/extra/source/jdk-6/LICENSE
deleted file mode 100644
index 39e216aa..00000000
--- a/extra/source/jdk-6/LICENSE
+++ /dev/null
@@ -1 +0,0 @@
-Please refer to http://java.com/license
diff --git a/extra/source/jdk-6/README.html b/extra/source/jdk-6/README.html
deleted file mode 100644
index b7996aec..00000000
--- a/extra/source/jdk-6/README.html
+++ /dev/null
@@ -1,10 +0,0 @@
-<html>
-<head>
-<title>README
-</title>
-</head>
-<body>
-Please refer to http://java.com/licensereadme
-</body>
-</html>
-
diff --git a/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt b/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt
deleted file mode 100644
index 4381e7df..00000000
--- a/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt
+++ /dev/null
@@ -1 +0,0 @@
-Please refer to http://java.com/thirdpartylicense
diff --git a/extra/source/jdk-6/jdk.SlackBuild b/extra/source/jdk-6/jdk.SlackBuild
deleted file mode 100755
index db589f7d..00000000
--- a/extra/source/jdk-6/jdk.SlackBuild
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-VERSION=6u25
-DVER=1.6.0_25
-ARCH=x86_64                  # only determines the lib path locations
-JAVA_ARCH=${JAVA_ARCH:-x64}  # or i586 if you want the 32bit version
-BUILD=${BUILD:-1}
-
-
-if [ "$JAVA_ARCH" = "x64" ]; then
-  LIB_ARCH=amd64
-else
-  LIB_ARCH=i386
-fi
-
-if [ "$ARCH" = "x86_64" ]; then
-  LIBDIRSUFFIX="64"
-else
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-jdk
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $PKG
-mkdir -p usr/lib${LIBDIRSUFFIX}
-cd usr/lib${LIBDIRSUFFIX}
-yes yes | sh $CWD/jdk-${VERSION}-linux-${JAVA_ARCH}.bin || exit 1
-mkdir -p $PKG/etc/profile.d
-for file in $(ls $CWD/profile.d/*) ; do
-  cat $file | sed -e "s#lib/java#lib${LIBDIRSUFFIX}/java#" \
-    > $PKG/etc/profile.d/$(basename $file)
-done
-chown -R root.root $PKG
-find $PKG \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 
-\) \
-  -exec chmod 644 {} \;
-
-chmod 755 $PKG/etc/profile.d/*
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  mv jdk${DVER} java || exit 1
-  ln -sf java jdk${DVER}
-) || exit 1
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-  ln -sf /usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/libnpjp2.so libnpjp2.so
-)
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  ln -sf ./java/jre/lib/${LIB_ARCH}/server/libjvm.so .
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat << EOF > $PKG/install/doinst.sh
-
-# Clean up a potential upgrade mess caused by changing the
-# installation directory to /usr/lib${LIBDIRSUFFIX}/java/:
-if [ -L usr/lib${LIBDIRSUFFIX}/java ]; then
-  rm -rf usr/lib${LIBDIRSUFFIX}/java
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/man
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/server
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/lib/${LIB_ARCH}/client
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/javaws
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/jre/bin
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/bin
-  mkdir -p usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-fi
-if [ -L ControlPanel ]; then
-  rm -f ControlPanel
-fi
-if [ -L ja ]; then
-  rm -f ja
-fi
-if [ -L javaws ]; then
-  rm -f javaws
-fi
-if [ -L libjsig.so ]; then
-  rm -f libjsig.so
-fi
-# End cleanup.
-EOF
-
-# Install the desktop/mime files:
-mkdir -p $PKG/usr/share/{applications,icons,mime}
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/applications/* \
-  $PKG/usr/share/applications/
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/icons/hicolor \
-  $PKG/usr/share/icons/
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/jre/lib/desktop/mime/packages \
-  $PKG/usr/share/mime/
-
-# We ship the package unmodified, so we do not compress manpages.
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/jdk-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
-
diff --git a/extra/source/jdk-6/register.html b/extra/source/jdk-6/register.html
deleted file mode 100644
index b5411e14..00000000
--- a/extra/source/jdk-6/register.html
+++ /dev/null
@@ -1,79 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
-"http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
-<title>Register your JDK</title>
-<style type="text/css">
-<!--
-.style1 {font-family: Arial, Helvetica, sans-serif}
-.style3 {font-family: Arial, Helvetica, sans-serif; font-size: small; }
-input.buttonblue,input.defbutton{ background: #3F6580;border-right:1px solid #304C60;border-bottom:1px solid #304C60;border-left:1px solid #BACDD9;border-top:1px solid #BACDD9; font-weight:bold; color:#FFFFFF; font-size:.8em; height:1.9em}
-input.buttonblue:hover{color:#fbe249;}
-a:link,a.named:visited{color:#3E6B8A}
-a:hover{text-decoration:underline}
-a{text-decoration:none}
-a:visited,a:visited code{color:#917E9C}
--->
-</style>
-</head>
-
-<body>
-<table width="813" border="0" cellpadding="3" cellspacing="0">
-  <tr>
-    <td width="7" height="78">&nbsp;</td>
-    <td width="794" align="left" valign="top">
-        <img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre/lib/servicetag/jdk_header.png" width="783" height="63"></td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td><p class="style1">Thank you for installing the 
-        <strong> Java Development Kit Version 6 Update 25 </strong>
-        from Oracle Corporation. </p>
-        <p class="style1">Registering your product will give you the following benefits:</p>
-        <ul class="style1">
-          <li> Notification of new versions, patches, and updates</li>
-          <li> Special offers on Oracle developer products, services and training </li>
-          <li> Access to early releases and documentation </li>
-        </ul>
-        <p class="style1">Product registration is FREE, quick and easy!</p>
-        <blockquote>
-          <p class="style1">All you need is an Oracle.com account. If you don't already have one, you will be prompted to create one. </p>
-          <table width="708" border="0" cellspacing="0" cellpadding="3">
-            <tr valign="top">
-              <td width="126" height="35">
-              <form name="form1" method="post" action="https://hs-ws1.oracle.com/RegistrationWeb/register/urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58?product=jdk&locale=en" enctype="text/xml">
-                <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.37.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58%22 version=%221.0%22><service_tag><instance_urn>urn:st:14aa9f1c-8a07-4e99-ada1-a020589ad7fd</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_25</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_25-b06 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2011-04-24 03:00:46 GMT</timestamp><container>global</container><source>jdk-6u25-fcs-bin-b06-linux-amd64-14_apr_2011.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>">
-                <input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';"  value="Register My JDK">
-              </form></td>
-              <td width="570"><span class="style3">You need to be connected to the Internet to register this Oracle product. </span></td>
-            </tr>
-          </table>
-        </blockquote>
-        </td>
-        </tr>
-    <tr>
-       <td>&nbsp;</td>
-       <td bgcolor="#f1f7df">
-       <p class="style3">Oracle Corporation respects your privacy. 
-    We will use your personal information for communications 
-    and management of your Oracle.com account, the services 
-    and applications you access using your Oracle.com account, 
-    and the products and systems you register with your Oracle.com account.</p>
-                <p class="style3">For more information on the data that will be collected as 
-          part of the registration process and how it will be managed <br>
-          see <a href="http://java.sun.com/javase/registration/JDKRegistrationPrivacy.html">http://java.sun.com/javase/registration/JDKRegistrationPrivacy.html</a>. <br>      
-          <br>
-          For more information on Oracle's Privacy Policy see <a href="http://www.oracle.com/html/privacy.html">http://www.oracle.com/html/privacy.html</a> or contact <a class="moz-txt-link-rfc2396E" href="mailto:privacy_ww@oracle.com">privacy_ww@oracle.com.</a></p></td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-</table>
-</body>
-</html>
diff --git a/extra/source/jdk-6/register_ja.html b/extra/source/jdk-6/register_ja.html
deleted file mode 100644
index 330e8430..00000000
--- a/extra/source/jdk-6/register_ja.html
+++ /dev/null
@@ -1,91 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.or
-g/TR/html4/loose.dtd">
-<html><head>
-
-
-<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"><title>JDK 製�登録</title>
-
-<!--
-Copyright (c) 2008, Oracle and/or its affiliates. All rights reserved.
-DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-
-This code is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License version 2 only, as
-published by the Free Software Foundation.  Oracle designates this
-particular file as subject to the "Classpath" exception as provided
-by Oracle in the LICENSE file that accompanied this code.
-
-This code is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-version 2 for more details (a copy is included in the LICENSE file that
-accompanied this code).
-
-You should have received a copy of the GNU General Public License version
-2 along with this work; if not, write to the Free Software Foundation,
-Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-or visit www.oracle.com if you need additional information or have any
-questions.
--->
-
-<style type="text/css">
-<!--
-.style1 {font-family: Arial, Helvetica, sans-serif}
-.style3 {font-family: Arial, Helvetica, sans-serif; font-size: small; }
-input.buttonblue,input.defbutton{ background: #3F6580;border-right:1px solid #304C60;border-bottom:1px solid #304C60;border-left:1px solid #BACDD9;border-top:1px solid #BACDD9; font-weight:bold; color:#FFFFFF; font-size:.8em; height:1.9em}
-input.buttonblue:hover{color:#fbe249;}
-a:link,a.named:visited{color:#3E6B8A}
-a:hover{text-decoration:underline}
-a{text-decoration:none}
-a:visited,a:visited code{color:#917E9C}
--->
-</style></head><body>
-<table border="0" cellpadding="3" cellspacing="0" width="813">
-  <tbody><tr>
-    <td height="78" width="7">&nbsp;</td>
-    <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-
-    <td><p class="style1">Oracle Corporation �<strong> Java Development Kit Version 6 Update 25 </strong>をインストール��������り��������。 </p>
-        <p class="style1">製�登録を�る��次�よ��特典を��る�������。</p>
-        <ul class="style1">
-          <li> 最新��ージョン�パッ���よ�更新�����通知</li>
-          <li> Oracle �開発者��製��サービス��よ�トレーニング�特別販売 </li>
-          <li> アーリーリリース�よ�ドキュメント��アクセス </li>
-        </ul>
-        <p class="style1">製�登録�無料��り�迅速�簡���。</p>
-        <blockquote>
-          <p class="style1">必���る���Oracle.com アカウント����。 ��アカウント���場���アカウント�作��求�られ��。 </p>
-          <table width="708" border="0" cellspacing="0" cellpadding="3">
-            <tr valign="top">
-              <td width="126" height="35"><form name="form1" method="post" action="https://hs-ws1.oracle.com/RegistrationWeb/register/urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58?product=jdk&locale=ja" enctype="text/xml">
-			  <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.37.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58%22 version=%221.0%22><service_tag><instance_urn>urn:st:14aa9f1c-8a07-4e99-ada1-a020589ad7fd</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_25</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_25-b06 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2011-04-24 03:00:46 GMT</timestamp><container>global</container><source>jdk-6u25-fcs-bin-b06-linux-amd64-14_apr_2011.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>">
-                <input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';"  value="JDK 製�登録">
-              </form></td>
-              <td width="570"><span class="style3">�� Oracle 製�を登録�る���インター�ット�接続���る必���り��。 </span></td>
-            </tr>
-	  </table>
-	</blockquote>
-	</td>
-	</tr>
-   <tr>
-       <td>&nbsp;</td>
-	<td bgcolor="#f1f7df">
-        <p class="style3">Oracle Corporation ���客様�プライ�シーを尊����。 �客様�個人情報���客様� Oracle.com アカウント��客様� Oracle.com アカウントを使用��アクセス�るサービス�アプリケーション��よ��客様� Oracle.com アカウント�登録�る製��システム�通信�管��使用���。</p>
-                <p class="style3">登録�際��集�れるデータや��れら���よ��管��れる������詳細��<br><a href="http://java.sun.com/javase/ja/registration/JDKRegistrationPrivacy.html">http://java.sun.com/javase/ja/registration/JDKRegistrationPrivacy.html</a> を�照������。 <br> <br> Oracle �プライ�シー�リシー�����詳細��<a href="http://www.oracle.com/html/privacy.html">http://www.oracle.com/html/privacy.html</a> を�照�る��<a class="moz-txt-link-rfc2396E" href="mailto:privacy_ww@oracle.com">������フォーム</a>�ら����������。</p></td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-</table>
-</body>
-</html>
diff --git a/extra/source/jdk-6/register_zh_CN.html b/extra/source/jdk-6/register_zh_CN.html
deleted file mode 100644
index d17e3535..00000000
--- a/extra/source/jdk-6/register_zh_CN.html
+++ /dev/null
@@ -1,66 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
-"http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
-<title>注册您的 JDK</title>
-<style type="text/css">
-<!--
-.style1 {font-family: Arial, Helvetica, sans-serif}
-.style3 {font-family: Arial, Helvetica, sans-serif; font-size: small; }
-input.buttonblue,input.defbutton{ background: #3F6580;border-right:1px solid #304C60;border-bottom:1px solid #304C60;border-left:1px solid #BACDD9;border-top:1px solid #BACDD9; font-weight:bold; color:#FFFFFF; font-size:.8em; height:1.9em}
-input.buttonblue:hover{color:#fbe249;}
-a:link,a.named:visited{color:#3E6B8A}
-a:hover{text-decoration:underline}
-a{text-decoration:none}
-a:visited,a:visited code{color:#917E9C}
--->
-</style></head><body>
-<table border="0" cellpadding="3" cellspacing="0" width="813">
-  <tbody><tr>
-    <td height="78" width="7">&nbsp;</td>
-    <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td>
-  </tr>
-
-  <tr>
-    <td>&nbsp;</td>
-
-<td><p class="style1">感谢您安装 Oracle Corporation 的 <strong>Java Development Kit Version 6 Update 25</strong>。 </p>
-<p class="style1">注册产��您将获得如下增值�务：</p>
-        <ul class="style1">
-<li> 获得新版本�修补程�和更新的通知�务</li>
-<li> 获得有关 Oracle 开�者产���务和培训的优惠 </li>
-<li> 获得对早期版本和文档的访问�� </li>
-        </ul>
-<p class="style1">产�注册是�费的，�快速�轻��</p>
-        <blockquote>
-<p class="style1">您需�具有 Oracle.com �户。如果您没有，系统将�示您创建一个。 </p>
-          <table width="708" border="0" cellspacing="0" cellpadding="3">
-            <tr valign="top">
-              <td width="126" height="35"><form name="form1" method="post" action="https://hs-ws1.oracle.com/RegistrationWeb/register/urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58?product=jdk&locale=zh_CN" enctype="text/xml">
-			  <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.37.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:38623f4b-7a05-441f-9da6-39cc71ca5a58%22 version=%221.0%22><service_tag><instance_urn>urn:st:14aa9f1c-8a07-4e99-ada1-a020589ad7fd</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_25</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_25-b06 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_25/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2011-04-24 03:00:46 GMT</timestamp><container>global</container><source>jdk-6u25-fcs-bin-b06-linux-amd64-14_apr_2011.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>">
-<input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';"  value="注册我的 JDK">
-              </form></td>
-<td width="570"><span class="style3">您需�连接到 Internet �注册此 Oracle 产�。 </span></td>
-            </tr>
-	  </table>
-	</blockquote>
-	</td>
-	</tr>
-    <tr>
-       <td>&nbsp;</td>
-	<td bgcolor="#f1f7df">
-        <p class="style3">Oracle 尊�您的��。我们会将您的个人信�用于通信和 Oracle.com �户的管��Oracle.com �户访问的�务和应用程�以�用于使用 Oracle.com �户注册的产�和系统。</p>
-<p class="style3">有关注册过程中收集的数�以�这些数�的管�方�的更多信�，<br>请访问 <a href="http://java.sun.com/javase/registration/JDKRegistrationPrivacy.html">http://java.sun.com/javase/registration/JDKRegistrationPrivacy.html</a>。<br> <br>有关 Oracle ��政策的更多信�，请访问 <a href="http://www.oracle.com/html/privacy.html">http://www.oracle.com/html/privacy.html</a> 或与 <a class="moz-txt-link-rfc2396E" href="mailto:privacy_ww@oracle.com">privacy_ww@oracle.com</a> �系。</p></td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-  <tr>
-    <td>&nbsp;</td>
-    <td>&nbsp;</td>
-  </tr>
-</table>
-</body>
-</html>
diff --git a/extra/source/recordmydesktop/recordmydesktop.SlackBuild b/extra/source/recordmydesktop/recordmydesktop.SlackBuild
index c5ff5d0e..837f873e 100755
--- a/extra/source/recordmydesktop/recordmydesktop.SlackBuild
+++ b/extra/source/recordmydesktop/recordmydesktop.SlackBuild
@@ -46,10 +46,20 @@
 PRGNAM=recordmydesktop
 VERSION=${VERSION:-0.3.8.1}
 QTVER=${QTVER:-0.3.8}
-ARCH=${ARCH:-x86_64}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 NUMJOBS=${NUMJOBS:" -j4 "}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 DOCS="AUTHORS COPYING README ChangeLog"
 QTDOCS="AUTHORS COPYING README ChangeLog"
 
diff --git a/extra/source/wicd/README.SLACKWARE b/extra/source/wicd/README.SLACKWARE
index 47a9cba9..e7a374dc 100644
--- a/extra/source/wicd/README.SLACKWARE
+++ b/extra/source/wicd/README.SLACKWARE
@@ -13,9 +13,5 @@ Your user account will need to be a member of the 'netdev' group
 in order to use wicd.
 
 Note that urwid will need to be installed if you want to use the 
-curses client.
-
-Also, if you don't have kde installed, you won't have a graphical
-sudo client available; you might wish to consider ktsuss from
-SlackBuilds.org.
-
+curses client.  Also, if you don't have kde installed, you won't 
+have a graphical sudo client available.
diff --git a/extra/source/wicd/doinst.sh b/extra/source/wicd/doinst.sh
index 2c0f7d98..78732c5b 100644
--- a/extra/source/wicd/doinst.sh
+++ b/extra/source/wicd/doinst.sh
@@ -33,4 +33,5 @@ fi
 config etc/dbus-1/system.d/wicd.conf.new
 config etc/rc.d/rc.wicd.new
 config etc/wicd/manager-settings.conf.new
+config etc/logrotate.d/wicd.logrotate.new
 
diff --git a/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff b/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff
deleted file mode 100644
index d479b29c..00000000
--- a/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff
+++ /dev/null
@@ -1,23 +0,0 @@
-revno: 554
-committer: Andrew Psaltis <ampsaltis@gmail.com>
-branch nick: 1.6
-timestamp: Mon 2010-03-29 13:19:08 -0400
-message:
-  Fixed typo in EAP-fast template, re-resolving bug 261804.
-
-=== modified file 'encryption/templates/eap'
---- encryption/templates/eap	2009-03-01 02:52:27 +0000
-+++ encryption/templates/eap	2010-03-29 17:19:08 +0000
-@@ -11,10 +11,10 @@
- 	proto=RSN WPA
- 	pairwise=CCMP TKIP
- 	group=CCMP TKIP
--	key-mgmt=WPA-EAP
-+	key_mgmt=WPA-EAP
- 	eap=FAST
- 	identity="$_USERNAME"
- 	password="$_PASSWORD"
- 	phase1="fast_provisioning=1"
--	pac-file="$_PAC_FILE"
-+	pac_file="$_PAC_FILE"
- }
diff --git a/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff b/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff
deleted file mode 100644
index dc3ace60..00000000
--- a/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff
+++ /dev/null
@@ -1,30 +0,0 @@
-revno: 553
-committer: Andrew Psaltis <ampsaltis@gmail.com>
-branch nick: 1.6
-timestamp: Wed 2010-01-27 14:06:21 -0500
-message:
-  Fixed bug in script macro expansion.
-
-=== modified file 'wicd/networking.py'
---- wicd/networking.py	2010-01-15 04:02:10 +0000
-+++ wicd/networking.py	2010-01-27 19:06:21 +0000
-@@ -215,8 +215,8 @@
-         if self.pre_disconnect_script:
-             print 'Running pre-disconnect script'
-             misc.ExecuteScript(expand_script_macros(self.pre_disconnect_script,
--                                                    'pre-disconnection', (mac,
--                                                                          name)),
-+                                                    'pre-disconnection',
-+                                                    mac, name),
-                                self.debug)
-         iface.ReleaseDHCP()
-         iface.SetAddress('0.0.0.0')
-@@ -229,7 +229,7 @@
-             print 'Running post-disconnect script'
-             misc.ExecuteScript(expand_script_macros(self.post_disconnect_script,
-                                                     'post-disconnection',
--                                                   (mac, name)),
-+                                                   mac, name),
-                                self.debug)
-         
-     def ReleaseDHCP(self):
diff --git a/extra/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff b/extra/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff
new file mode 100644
index 00000000..4be44631
--- /dev/null
+++ b/extra/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff
@@ -0,0 +1,11 @@
+--- ./wicd/misc.py.orig	2012-04-30 14:20:09.000000000 -0500
++++ ./wicd/misc.py	2012-05-09 14:08:24.611298308 -0500
+@@ -430,7 +430,7 @@
+     """ Sanitize property names to be used in config-files. """
+     allowed = string.ascii_letters + '_' + string.digits
+     table = string.maketrans(allowed, ' ' * len(allowed))
+-    return s.translate(None, table)
++    return s.encode('ascii', 'replace').translate(None, table)
+ 
+ def sanitize_escaped(s):
+     """ Sanitize double-escaped unicode strings. """
diff --git a/extra/source/wicd/wicd.SlackBuild b/extra/source/wicd/wicd.SlackBuild
index 20dcd393..77c00f46 100755
--- a/extra/source/wicd/wicd.SlackBuild
+++ b/extra/source/wicd/wicd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008-2010  Robby Workman  Northport, AL, USA
+# Copyright 2008,2009,2010,2011,2012  Robby Workman  Northport, AL, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=wicd
-VERSION=${VERSION:-1.7.0}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-1.7.2.4}
+BUILD=${BUILD:-4}
 
 # Automatically determine architecture for build & packaging:
 if [ -z "$ARCH" ]; then
@@ -51,19 +51,30 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1
 cd $PRGNAM-$VERSION || exit 1
+
 chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
 
-# Fix a couple of bugs that are addressed in the upstream bzr repo
-zcat $CWD/wicd-1.7.0-fix_EAP_fast_typo.diff.gz | patch -p0 --verbose || exit 1
-zcat $CWD/wicd-1.7.0-fix_script_bug.diff.gz | patch -p0 --verbose || exit 1
+zcat $CWD/wicd-1.7.2.4.sanitize.string.bugfix.diff.gz | patch -p1 --verbose || exit 1
 
 python setup.py configure \
   --lib=/usr/lib${LIBDIRSUFFIX}/wicd \
   --kdedir=/usr/share/autostart \
   --backends=/usr/lib${LIBDIRSUFFIX}/wicd/backends \
   || exit 1
+
+# Bypass the need for pybabel (thanks, dapal!)
+for pofile in $(find po/ -type f -name "*.po") ; do 
+  mkdir -p translations/$(basename ${pofile} .po)/LC_MESSAGES
+  msgfmt -o translations/$(basename ${pofile} .po)/LC_MESSAGES/wicd.mo ${pofile}
+done
+
 python setup.py install --root=$PKG || exit 1
 
 # Handle some Slackware defaults
@@ -75,8 +86,9 @@ dhcp_client = 2
 sudo_app = 2
 EOF
 
-# Don't clobber dbus config on upgrade
+# Don't clobber configs on upgrade
 mv $PKG/etc/dbus-1/system.d/wicd.conf $PKG/etc/dbus-1/system.d/wicd.conf.new
+mv $PKG/etc/logrotate.d/wicd.logrotate $PKG/etc/logrotate.d/wicd.logrotate.new
 mv $PKG/etc/rc.d/rc.wicd $PKG/etc/rc.d/rc.wicd.new
 
 # Compress the man pages and add a bit to the package docs
diff --git a/extra/source/xf86-video-fbdev/slack-desc b/extra/source/xf86-video-fbdev/slack-desc
new file mode 100644
index 00000000..08a636a1
--- /dev/null
+++ b/extra/source/xf86-video-fbdev/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+xf86-video-fbdev: xf86-video-fbdev (X.Org generic framebuffer video driver)
+xf86-video-fbdev:
+xf86-video-fbdev: xf86-video-fbdev is the generic framebuffer video driver for X.Org,
+xf86-video-fbdev: designed to draw into a video framebuffer provided by the
+xf86-video-fbdev: underlying operating system.
+xf86-video-fbdev:
+xf86-video-fbdev:
+xf86-video-fbdev:
+xf86-video-fbdev:
+xf86-video-fbdev:
+xf86-video-fbdev:
diff --git a/extra/source/xf86-video-fbdev/xf86-video-fbdev.SlackBuild b/extra/source/xf86-video-fbdev/xf86-video-fbdev.SlackBuild
new file mode 100755
index 00000000..8ea08738
--- /dev/null
+++ b/extra/source/xf86-video-fbdev/xf86-video-fbdev.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xf86-video-fbdev
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/xf86-video-fbdev-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/extra/wicd/README.SLACKWARE b/extra/wicd/README.SLACKWARE
index 47a9cba9..e7a374dc 100644
--- a/extra/wicd/README.SLACKWARE
+++ b/extra/wicd/README.SLACKWARE
@@ -13,9 +13,5 @@ Your user account will need to be a member of the 'netdev' group
 in order to use wicd.
 
 Note that urwid will need to be installed if you want to use the 
-curses client.
-
-Also, if you don't have kde installed, you won't have a graphical
-sudo client available; you might wish to consider ktsuss from
-SlackBuilds.org.
-
+curses client.  Also, if you don't have kde installed, you won't 
+have a graphical sudo client available.
diff --git a/isolinux/README.TXT b/isolinux/README.TXT
index 2c1cfbbf..fae59323 100644
--- a/isolinux/README.TXT
+++ b/isolinux/README.TXT
@@ -13,7 +13,7 @@ mkisofs -o /tmp/slackware-dvd.iso \
   -sort isolinux/iso.sort \

   -b isolinux/isolinux.bin \

   -c isolinux/isolinux.boot \

-  -m 'kde-l10n-*.tar.bz2' \

+  -m 'source' \

   -V "SlackDVD" .

 

 On my system, here's the command I'd use to burn the resulting DVD ISO:

@@ -39,15 +39,14 @@ growisofs \
   -sort isolinux/iso.sort \

   -b isolinux/isolinux.bin \

   -c isolinux/isolinux.boot \

-  -m 'kde-l10n-*.tar.bz2' \

+  -m 'source' \

   -dvd-compat \

   -V "SlackDVD" .

 

-Note that the source files for the KDE language translations will not be

-included on these DVD images in order to keep them under the limit for

-a single-layer disc.  If you are using double layer DVD media and want to

-burn the complete tree to your disc, remove the -m option line from the

-command.

+Note that the source code directory will not be included on these DVD

+images in order to keep them under the limit for a single-layer disc.

+If you are using double layer DVD media and want to burn the complete

+tree to your disc, remove the -m option line from the command.

 

 

 HOW TO MAKE A SET OF BOOTABLE / INSTALLABLE CDROMS

diff --git a/isolinux/f2.txt b/isolinux/f2.txt
index bb6ffbc2..dad153df 100644
--- a/isolinux/f2.txt
+++ b/isolinux/f2.txt
@@ -3,7 +3,7 @@
 
 You'll need one kernel to get Linux started on your system so that you can
 install it.  The default kernel is huge.s, which requires at least a
-Pentium Pro processor.  This kernel now includes Speakup support as well.
+Athlon64 processor.  This kernel now includes Speakup support as well.
 
 To boot the chosen kernel put the name of the kernel and press enter.
 
diff --git a/isolinux/isolinux.boot b/isolinux/isolinux.boot
index 08f4418b..d0d8f08f 100644
--- a/isolinux/isolinux.boot
+++ b/isolinux/isolinux.boot
diff --git a/isolinux/message.txt b/isolinux/message.txt
index 681ae661..ab7dba61 100644
--- a/isolinux/message.txt
+++ b/isolinux/message.txt
@@ -1,5 +1,5 @@
 
-Welcome to 09Slackware6407 version 13.37 (Linux kernel 2.6.37.6)!
+Welcome to 09Slackware6407 version 14.0 (Linux kernel 3.2.29)!
 
 If you need to pass extra parameters to the kernel, enter them at the prompt
 below after the name of the kernel to boot (huge.s etc).
diff --git a/isolinux/setpkg b/isolinux/setpkg
index 134e82f3..cc60f54e 100644
--- a/isolinux/setpkg
+++ b/isolinux/setpkg
@@ -31,6 +31,7 @@ ENTER key when you are finished." \
 "TCL" "Tcl/Tk script languages" on "The TCL series contains the Tcl/Tk/TclX languages and programs that use them." \
 "X" "X Window System" on "This series contains X, the window system (or GUI) used by Linux." \
 "XAP" "X Applications" on "The XAP series is a collection of applications for X." \
+"XFCE" "The Xfce Desktop Environment for X" on "Xfce is a fast and lightweight GTK+ based desktop environment for X." \
 "Y" "Games" on "The Y series contains a collection of classic text-based games." \
 2> $TMP/SeTSERIES
 if [ ! $? = 0 ]; then
diff --git a/kernels/VERSIONS.TXT b/kernels/VERSIONS.TXT
index ba28c380..b0ca5480 100644
--- a/kernels/VERSIONS.TXT
+++ b/kernels/VERSIONS.TXT
@@ -1,3 +1,3 @@
 

-These kernels are version 2.6.37.6.

+These kernels are version 3.2.29.

 

diff --git a/pasture/source/gxine/gxine.SlackBuild b/pasture/source/gxine/gxine.SlackBuild
deleted file mode 100755
index 172d17aa..00000000
--- a/pasture/source/gxine/gxine.SlackBuild
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-VERSION=0.5.905
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-gxine
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf gxine-$VERSION
-tar xvf $CWD/gxine-$VERSION.tar.bz2 || exit 1
-cd gxine-$VERSION || exit 1
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var/lib \
-  --mandir=/usr/man \
-  --disable-static \
-  --with-browser-plugin \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-#zcat $CWD/gxine.desktop.gz > $PKG/usr/share/applications/gxine.desktop
-#if [ ! -r $PKG/usr/share/pixmaps/gxine.png ]; then
-#  exit 1
-#fi
-
-# I'm sorry, but making this link was the worst suggestion I ever
-# went along with.  I'll continue to include it (for now), but having
-# (buggy) gxine pop up without prompting all the time is ANNOYING!!!
-#mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-#( cd $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-#  ln -sf /usr/lib${LIBDIRSUFFIX}/gxine/gxineplugin.so .
-#)
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-
-mkdir -p $PKG/usr/doc/gxine-$VERSION
-cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README TODO \
-  $PKG/usr/doc/gxine-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/gxine-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/gxine/gxine.desktop b/pasture/source/gxine/gxine.desktop
deleted file mode 100644
index 54e5e6c2..00000000
--- a/pasture/source/gxine/gxine.desktop
+++ /dev/null
@@ -1,14 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Encoding=UTF-8
-Name=gxine
-GenericName=Video Player
-Comment=Play films and songs, or watch digital TV
-Exec=gxine
-MultipleArgs=true
-Icon=/usr/share/pixmaps/gxine.png
-Terminal=false
-Type=Application
-StartupNotify=true
-Categories=GTK;Application;AudioVideo;
-MimeType=video/mpeg;video/msvideo;video/quicktime;video/x-avi;video/x-ms-asf;video/x-ms-wmv;video/x-msvideo;application/x-ogg;application/ogg;audio/x-mp3;audio/x-mpeg;video/x-mpeg;video/x-fli;audio/x-wav;audio/x-mpegurl;audio/x-scpls;audio/x-ms-asx;application/vnd.rn-realmedia;audio/x-real-audio;audio/x-pn-realaudio;application/x-flac;audio/x-flac;application/x-shockwave-flash;audio/mpeg;audio/x-ms-asf;audio/x-m4a;audio/x-ms-wax;video/dv;video/x-anim;video/x-flc;misc/ultravox;application/x-matroska;audio/vnd.rn-realaudio;audio/x-pn-aiff;audio/x-pn-au;audio/x-pn-wav;audio/x-pn-windows-acm;image/vnd.rn-realpix;video/vnd.rn-realvideo
diff --git a/pasture/source/gxine/slack-desc b/pasture/source/gxine/slack-desc
deleted file mode 100644
index 18f7cef4..00000000
--- a/pasture/source/gxine/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-gxine: gxine (GTK+ media player based on Xine)
-gxine:
-gxine: Xine is a free multimedia player.  It plays back CDs, DVDs, and VCDs,
-gxine: multimedia files, and multimedia streamed over a network.
-gxine:
-gxine: The gxine package contains a GTK+ graphical user interface for the
-gxine: Xine multimedia player.
-gxine:
-gxine:
-gxine:
-gxine:
diff --git a/pasture/source/make/make.SlackBuild b/pasture/source/make/make.SlackBuild
deleted file mode 100755
index 32e4b250..00000000
--- a/pasture/source/make/make.SlackBuild
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh
-
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-VERSION=3.81
-BUILD=${BUILD:-3}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-make
-
-if [ "$ARCH" = "i386" ]; then
-  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
-elif [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-else
-  SLKCFLAGS="-O2"
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf make-$VERSION
-tar xjvf $CWD/make-$VERSION.tar.bz2 || exit 1
-cd make-$VERSION || exit 1
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --infodir=/usr/info \
-  --build=$ARCH-slackware-linux
-make || exit 1
-make install DESTDIR=$PKG || exit 1
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-gzip -9 $PKG/usr/man/man1/*
-rm $PKG/usr/info/dir
-gzip -9 $PKG/usr/info/*
-# This has been here so long that it should probably stay.
-# Trying to get rid of ginstall didn't go well, so...  :-)
-( cd $PKG/usr/bin
-  rm -f gmake
-  ln -sf make gmake )
-mkdir -p $PKG/usr/doc/make-$VERSION
-cp -a \
-  ABOUT-NLS AUTHORS COPYING NEWS README* \
-  $PKG/usr/doc/make-$VERSION/
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Build the package:
-cd $PKG
-makepkg -l y -c n $TMP/make-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/make/slack-desc b/pasture/source/make/slack-desc
deleted file mode 100644
index ef19ca33..00000000
--- a/pasture/source/make/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-make: make (GNU make utility to maintain groups of programs)
-make:
-make: This is the GNU implementation of make, which was written by Richard
-make: Stallman and Roland McGrath.  The purpose of the make utility is to
-make: determine automatically which pieces of a large program need to be 
-make: recompiled, and issue the commands to recompile them.  
-make:
-make: This is needed to compile just about any major C program, including
-make: the Linux kernel.
-make:
-make:
diff --git a/pasture/source/mesa-7.8.2/README.GIT b/pasture/source/mesa-7.8.2/README.GIT
deleted file mode 100644
index 4e79f374..00000000
--- a/pasture/source/mesa-7.8.2/README.GIT
+++ /dev/null
@@ -1,16 +0,0 @@
-Anonymous git Access
-
-   To get the Mesa sources anonymously (read-only):
-
-    1. Install the git software on your computer if needed.
-
-    2. Get an initial, local copy of the repository with:
-
-     git clone git://anongit.freedesktop.org/git/mesa/mesa
-
-
-    3. Later, you can update your tree from the master repository with:
-
-     git pull origin
-
-
diff --git a/pasture/source/mesa-7.8.2/get-mesa.sh b/pasture/source/mesa-7.8.2/get-mesa.sh
deleted file mode 100644
index 710043c6..00000000
--- a/pasture/source/mesa-7.8.2/get-mesa.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-rm -rf mesa
-git clone git://anongit.freedesktop.org/git/mesa/mesa
-# package the source archive and clean up:
-( cd mesa ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
-DATE=$(date +%Y%m%d)
-mv mesa mesa-${DATE}_git
-tar cjf mesa-${DATE}_git.tar.bz2 mesa-${DATE}_git
-rm -rf mesa-${DATE}_git
diff --git a/pasture/source/mesa-7.8.2/mesa.SlackBuild b/pasture/source/mesa-7.8.2/mesa.SlackBuild
deleted file mode 100755
index d4579625..00000000
--- a/pasture/source/mesa-7.8.2/mesa.SlackBuild
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=mesa
-VERSION=${VERSION:-$(echo MesaLib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-PKG_VERSION=${VERSION}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# Be sure this list is up-to-date:
-DRI_DRIVERS="i810,i915,i965,mach64,mga,r128,r200,r300,r600,radeon,savage,sis,tdfx,unichrome,swrast"
-
-NUMJOBS=${NUMJOBS:--j8}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mesa
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf Mesa-${VERSION}
-tar xvf $CWD/MesaLib-${PKG_VERSION}.tar.?z* || exit 1
-tar xvf $CWD/MesaGLUT-${PKG_VERSION}.tar.?z* || exit 1
-tar xvf $CWD/MesaDemos-${PKG_VERSION}.tar.?z* || exit 1
-cd Mesa-$VERSION
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/mesa-$VERSION \
-  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
-  --with-dri-drivers="$DRI_DRIVERS" \
-  --build=$ARCH-slackware-linux
-
-# Nobody else is enabling this.  Seems like it's asking for trouble.
-#  --enable-xcb
-
-# This doesn't seem to build - maybe it needs something else...
-#  --enable-gallium-nouveau 
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Install gears and glinfo:
-mkdir -p $PKG/usr/bin
-cp -a progs/demos/gears $PKG/usr/bin/gears
-cp -a progs/demos/glinfo $PKG/usr/bin/glinfo
-
-# Install some "demos":
-( cd progs/xdemos
-  cp glthreads glxcontexts glxdemo glxgears glxgears_fbconfig glxheads \
-    glxinfo glxpbdemo glxpixmap \
-    $PKG/usr/bin
-)
-
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-# Compress info files, if any:
-if [ -d $PKG/usr/info ]; then
-  ( cd $PKG/usr/info
-    rm -f dir
-    gzip -9 *
-  )
-fi
-
-mkdir -p $PKG/usr/doc/Mesa-$PKG_VERSION/html
-cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/Mesa-$PKG_VERSION
-rm -f docs/relnotes*.html docs/RELNOTES*
-cp -a docs/*.html $PKG/usr/doc/Mesa-$PKG_VERSION/html
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$PKG_VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/mesa-7.8.2/mesa.url b/pasture/source/mesa-7.8.2/mesa.url
deleted file mode 100644
index f4efeae6..00000000
--- a/pasture/source/mesa-7.8.2/mesa.url
+++ /dev/null
@@ -1 +0,0 @@
-ftp://ftp.freedesktop.org/pub/mesa/
diff --git a/pasture/source/mesa-7.8.2/slack-desc b/pasture/source/mesa-7.8.2/slack-desc
deleted file mode 100644
index 113964bd..00000000
--- a/pasture/source/mesa-7.8.2/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-mesa: mesa (a 3-D graphics library)
-mesa:
-mesa: Mesa is a 3-D graphics library with an API very similar to that of
-mesa: another well-known 3-D graphics library.  :-)  The Mesa libraries are
-mesa: used by X to provide both software and hardware accelerated graphics.
-mesa:
-mesa: Mesa was written by Brian Paul.
-mesa:
-mesa:
-mesa:
-mesa:
diff --git a/recompress.sh b/recompress.sh
index 51c94b23..2680ed74 100755
--- a/recompress.sh
+++ b/recompress.sh
@@ -21,26 +21,30 @@ gzip ./extra/source/grub/grubconfig_localefix.patch
 gzip ./extra/source/bittorrent/doinst.sh
 gzip ./extra/source/bittorrent/bittorrent-xterm.sh
 gzip ./extra/source/partitionmanager/doinst.sh
-gzip ./extra/source/fvwm-2.6.1/xinitrc.fvwm2
-gzip ./extra/source/fvwm-2.6.1/doinst.sh
-gzip ./extra/source/wicd/wicd-1.7.0-fix_script_bug.diff
-gzip ./extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff
+gzip ./extra/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff
 gzip ./extra/source/wicd/doinst.sh
-gzip ./extra/source/bash-completion/bash_completion.sh
 gzip ./extra/source/bash-completion/fixup-sh-script-completions.diff
+gzip ./extra/source/bash-completion/slackpkg-slapt-get-Update-the-list-of-package-sets.patch
 gzip ./extra/source/bittornado/btdownloadxterm.sh
 gzip ./extra/source/bittornado/doinst.sh
 gzip ./extra/source/tightvnc/doinst.sh
 gzip ./extra/source/tightvnc/tightvnc.paths-and-perms.diff
-gzip ./extra/source/GConf/doinst.sh
-gzip ./testing/source/mesa/patches/i915_fragment_shader_disable.patch
-gzip ./testing/source/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
+gzip ./testing/source/rp-pppoe/doinst.sh
+gzip ./source/xfce/xfce4-mixer/doinst.sh
+gzip ./source/xfce/xfce4-notifyd/doinst.sh
+gzip ./source/xfce/xfce4-screenshooter/doinst.sh
+gzip ./source/xfce/xfce4-clipman-plugin/doinst.sh
+gzip ./source/xfce/xfce4-settings/xfce4-settings.theme.diff
+gzip ./source/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff
+gzip ./source/xfce/xfce4-power-manager/doinst.sh
+gzip ./source/xfce/xfce4-taskmanager/doinst.sh
 gzip ./source/a/mcelog/doinst.sh
 gzip ./source/a/mcelog/mcelog.init.diff
 gzip ./source/a/kbd/sources/kbd-1.15-unicode_start.patch
 gzip ./source/a/kbd/sources/speakupmap.map
 gzip ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch
 gzip ./source/a/kbd/sources/kbd-1.15.2-po.patch
+gzip ./source/a/kbd/sources/kbd-1.15.3-fix-es-translation.patch
 gzip ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch
 gzip ./source/a/kbd/sources/nl.euro.diff
 gzip ./source/a/pcmciautils/doinst.sh
@@ -48,6 +52,7 @@ gzip ./source/a/dialog/dialog.smaller.min.height.diff
 gzip ./source/a/splitvt/splitvt_1.6.5-9.diff
 gzip ./source/a/bin/scripts/xx
 gzip ./source/a/bin/scripts/diskcopy
+gzip ./source/a/cpio/cpio.32bit.crc.diff
 gzip ./source/a/acl/acl.destdir.diff
 gzip ./source/a/lha/lha_1.14i-10.1.diff
 gzip ./source/a/bash/doinst.sh
@@ -55,10 +60,13 @@ gzip ./source/a/tcsh/tcsh.nobuiltincolorls.diff
 gzip ./source/a/tcsh/doinst.sh
 gzip ./source/a/elvis/elvis.ref.c.getline.diff
 gzip ./source/a/dbus/dbus-1.4.x-allow_root_globally.diff
+gzip ./source/a/dbus/dbus.set.home.diff
 gzip ./source/a/dbus/rc.messagebus
 gzip ./source/a/dbus/doinst.sh
 gzip ./source/a/usb_modeswitch/device_reference.txt
 gzip ./source/a/usb_modeswitch/doinst.sh
+gzip ./source/a/patch/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff
+gzip ./source/a/patch/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff
 gzip ./source/a/minicom/minicom.users
 gzip ./source/a/minicom/lrzsz_0.12.21-5.diff
 gzip ./source/a/minicom/config.sub-x86_64.diff
@@ -69,8 +77,8 @@ gzip ./source/a/acpid/default
 gzip ./source/a/acpid/doinst.sh
 gzip ./source/a/acpid/acpi_handler.sh
 gzip ./source/a/utempter/doinst.sh
+gzip ./source/a/lvm2/fix-build-with-udev-183.patch
 gzip ./source/a/lvm2/doinst.sh
-gzip ./source/a/lvm2/build_with_udev_165_and_later.diff
 gzip ./source/a/sysvinit-functions/doinst.sh
 gzip ./source/a/logrotate/logrotate.conf
 gzip ./source/a/logrotate/logrotate.cron
@@ -84,7 +92,8 @@ gzip ./source/a/file/file.zisofs.magic
 gzip ./source/a/file/file.quiet.diff
 gzip ./source/a/file/file.etc.file.diff
 gzip ./source/a/file/file.xz.magic
-gzip ./source/a/pciutils/pciutils.ids.dest.diff
+gzip ./source/a/pciutils/pciutils.update.pci.ids.url.diff
+gzip ./source/a/pciutils/pciutils.dontcompress.diff
 gzip ./source/a/tar/tar-1.2x.support_txz.diff
 gzip ./source/a/tar/tar.nolonezero.diff
 gzip ./source/a/tar/tar.norecordsizespam.diff
@@ -94,16 +103,21 @@ gzip ./source/a/tar/tar-1.13.bzip2.diff
 gzip ./source/a/less/less.sysconfdir.diff
 gzip ./source/a/less/lesspipe.sh
 gzip ./source/a/lrzip/doinst.sh
+gzip ./source/a/util-linux/net-tools.config.h
 gzip ./source/a/util-linux/setserial-undef_TIOCGHAYESESP.diff
 gzip ./source/a/util-linux/util-linux.fdisk-no-solaris.diff
-gzip ./source/a/util-linux/adjtimex_1.23-1.diff
 gzip ./source/a/util-linux/setserial-rc.serial.diff
+gzip ./source/a/util-linux/0001-mount-old-fix-encryption-usage.patch
 gzip ./source/a/util-linux/ziptool-fix_build.patch
+gzip ./source/a/util-linux/column-fix_long_opts.diff
+gzip ./source/a/util-linux/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch
 gzip ./source/a/util-linux/doinst.sh
-gzip ./source/a/util-linux/net-tools.diff
-gzip ./source/a/util-linux/net-tools_1.60-19.diff
+gzip ./source/a/util-linux/adjtimex_1.29-2.2.diff
 gzip ./source/a/floppy/fdutils-5.4-20020222.diff
 gzip ./source/a/floppy/fdutils.mediaprm.diff
+gzip ./source/a/isapnptools/isapnptools_1.26-5.diff
+gzip ./source/a/slocate/slocate.bigfile.diff
+gzip ./source/a/slocate/slocate.CVE-2007-0277.diff
 gzip ./source/a/gpm/inputattach.c
 gzip ./source/a/gpm/gpm-1.20.1-math.patch
 gzip ./source/a/gpm/gpm-evdev-cumulative.patch
@@ -124,40 +138,42 @@ gzip ./source/a/gpm/gpm-1.20.1-input.patch
 gzip ./source/a/gpm/gpm-1.20.1-subscript.patch
 gzip ./source/a/shadow/patches/r3160.diff
 gzip ./source/a/shadow/patches/r3055.diff
-gzip ./source/a/shadow/patches/r3299.diff
 gzip ./source/a/shadow/patches/r3062.diff
 gzip ./source/a/shadow/patches/r3054.diff
 gzip ./source/a/shadow/patches/r3060.diff
 gzip ./source/a/shadow/patches/r3096.diff
 gzip ./source/a/shadow/patches/r3194.diff
+gzip ./source/a/shadow/patches/unused/r3299.diff
+gzip ./source/a/shadow/patches/r3090.diff
 gzip ./source/a/shadow/useradd
+gzip ./source/a/shadow/shadow.man.nodups.diff
 gzip ./source/a/shadow/login.defs
 gzip ./source/a/shadow/doinst.sh
 gzip ./source/a/libcgroup/libcgroup.conf.diff
 gzip ./source/a/libcgroup/libcgroup.init.diff
 gzip ./source/a/libcgroup/doinst.sh
+gzip ./source/a/upower/doinst.sh
+gzip ./source/a/gptfdisk/gptfdisk.remove.icu4c.dep.diff
 gzip ./source/a/bzip2/bzip2.saneso.diff
 gzip ./source/a/e2fsprogs/doinst.sh
 gzip ./source/a/smartmontools/doinst.sh
-gzip ./source/a/usbutils/usbutils.ids.dest
 gzip ./source/a/dcron/defs.h.TMPDIR.diff
 gzip ./source/a/dcron/run-parts.8
 gzip ./source/a/dcron/crontab.c.O_EXCL.diff
-gzip ./source/a/dcron/dcron.manpage.paths.diff
 gzip ./source/a/dcron/crontab.root
 gzip ./source/a/dcron/doinst.sh
 gzip ./source/a/dcron/run-parts
 gzip ./source/a/getty-ps/getty.bugfixes.diff
-gzip ./source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff
+gzip ./source/a/sysvinit/sysvinit.paths.diff
 gzip ./source/a/sysvinit/doinst.sh
-gzip ./source/a/sysvinit/sysvinit.diff
-gzip ./source/a/sysvinit/sysvinit-2.86-timeval.patch
 gzip ./source/a/dosfstools/dosfstools.paths.diff
 gzip ./source/a/sysklogd/use_memmove_not_strcpy.diff
 gzip ./source/a/sysklogd/doinst.sh
 gzip ./source/a/udev/rule_generator.diff
-gzip ./source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch
+gzip ./source/a/udev/fix-42-usb-hid-pm.rules.diff
+gzip ./source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch
 gzip ./source/a/udev/doinst.sh
+gzip ./source/a/eject/eject_for_mac.patch
 gzip ./source/a/eject/eject.spaces.diff
 gzip ./source/a/genpower/genpower.halt.diff
 gzip ./source/a/genpower/genpower.var.diff
@@ -177,8 +193,7 @@ gzip ./source/a/coreutils/coreutils-dircolors.sh
 gzip ./source/a/mt-st/mt-st.man.diff
 gzip ./source/a/mt-st/mt-st.config.diff
 gzip ./source/a/mt-st/mt-st.sdlt.diff
-gzip ./source/a/cups/usb-backend-both-usblp-and-libusb.dpatch
-gzip ./source/a/cups/cups.fix_broken_locking.diff
+gzip ./source/a/cups/usb-backend-reset-after-job-only-for-specific-devices.patch
 gzip ./source/a/cups/doinst.sh
 gzip ./source/a/devs/makedev_2.3.1-46.2.diff
 gzip ./source/a/devs/makedev_2.3.1.slack.diff
@@ -193,17 +208,13 @@ gzip ./source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option
 gzip ./source/a/rpm2tgz/patches/0007-Add-support-for-.txz-packages-and-rpm2txz-symlink.patch
 gzip ./source/a/rpm2tgz/patches/0008-Avoid-none-values-in-slack-desc.patch
 gzip ./source/a/rpm2tgz/patches/0001-fix-d-handling.patch
-gzip ./source/a/mdadm/mdadm.static.diff
 gzip ./source/a/mdadm/doinst.sh
 gzip ./source/a/findutils/findutils.no.default.options.warnings.diff
 gzip ./source/a/findutils/findutils.nolocate.diff
+gzip ./source/a/syslinux/syslinux.altmbr.diff
+gzip ./source/a/udisks2/doinst.sh
 gzip ./source/a/attr/attr.destdir.diff
-gzip ./source/a/module-init-tools/modprobe.ignore_some_suffixes.diff
-gzip ./source/a/module-init-tools/doinst.sh
 gzip ./source/a/unarj/Makefile
-gzip ./source/n/httpd/httpd.nossldefault.diff
-gzip ./source/n/httpd/httpd.brigade_move.__noinline__.gcc451.diff
-gzip ./source/n/httpd/config.layout.diff
 gzip ./source/n/httpd/httpd.runasapache.diff
 gzip ./source/n/httpd/doinst.sh
 gzip ./source/n/dnsmasq/dnsmasq.leasedir.diff
@@ -220,9 +231,7 @@ gzip ./source/n/irssi/irssi.ssl_proxy.diff
 gzip ./source/n/irssi/irssi.manpage_fix.diff
 gzip ./source/n/irssi/doinst.sh
 gzip ./source/n/openssh/doinst.sh
-gzip ./source/n/bluez/patches/bluez-dbus-config.patch
-gzip ./source/n/bluez/patches/bluez-run_udev_helper.patch
-gzip ./source/n/bluez/patches/bluez-unbreak_dell_mouse.patch
+gzip ./source/n/bluez/bluez.enable.audio.socket.diff
 gzip ./source/n/bluez/doinst.sh
 gzip ./source/n/mailx/doinst.sh
 gzip ./source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff
@@ -232,25 +241,20 @@ gzip ./source/n/netkit-timed/netkit-timed-0.17.diff
 gzip ./source/n/ytalk/doinst.sh
 gzip ./source/n/stunnel/doinst.sh
 gzip ./source/n/netatalk/netatalk.etc2ps.diff
-gzip ./source/n/netatalk/netatalk.afpdconf.diff
 gzip ./source/n/netatalk/doinst.sh
-gzip ./source/n/netatalk/netatalk.without_xfs.diff
 gzip ./source/n/icmpinfo/icmpinfo-1.11.diff
 gzip ./source/n/netwrite/netwrite-0.17.diff
+gzip ./source/n/cifs-utils/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch
 gzip ./source/n/bsd-finger/bsd-finger-0.17.diff
 gzip ./source/n/netkit-routed/routed.18.candidate.final.patch
 gzip ./source/n/netkit-routed/netkit-routed-0.17.diff
-gzip ./source/n/net-tools/net-tools_1.60-23.diff
-gzip ./source/n/net-tools/net-tools.struct.x25_address.gcc4.diff
-gzip ./source/n/net-tools/net-tools.switch.default.gcc4.diff
-gzip ./source/n/net-tools/net-tools.diff
-gzip ./source/n/net-tools/net-tools.mii-tool.string.diff
+gzip ./source/n/net-tools/net-tools.config.h
 gzip ./source/n/inetd/inetd.loopingdos.diff
 gzip ./source/n/inetd/inetd-OpenBSD-1.79.diff
 gzip ./source/n/openldap-client/doinst.sh
 gzip ./source/n/netwatch/netwatch.makefile.diff
 gzip ./source/n/netwatch/netwatch.phonemyself.diff
-gzip ./source/n/wpa_supplicant/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch
+gzip ./source/n/wpa_supplicant/doinst.sh
 gzip ./source/n/nmap/nmap.ndiff.mandir.diff
 gzip ./source/n/procmail/procmail_3.22-5.diff
 gzip ./source/n/procmail/procmail.lfs.diff
@@ -258,7 +262,7 @@ gzip ./source/n/rp-pppoe/doinst.sh
 gzip ./source/n/pidentd/pidentd.conf.diff
 gzip ./source/n/pidentd/doinst.sh
 gzip ./source/n/dhcpcd/COPYRIGHT
-gzip ./source/n/dhcpcd/50-ntp.conf.diff
+gzip ./source/n/dhcpcd/define-SERVICEstuff-for-Slackware.patch
 gzip ./source/n/dhcpcd/doinst.sh
 gzip ./source/n/sendmail/Build
 gzip ./source/n/popa3d/popa3d.diff
@@ -284,17 +288,19 @@ gzip ./source/n/netdate/netdate.diff
 gzip ./source/n/netdate/netdate.diff2
 gzip ./source/n/wget/doinst.sh
 gzip ./source/n/gpa/doinst.sh
+gzip ./source/n/curl/curl-7.27.0_curl-config_syntax_fix.diff
 gzip ./source/n/samba/doinst.sh
 gzip ./source/n/samba/smb.conf.diff
-gzip ./source/n/php/php.session.save_path.diff
+gzip ./source/n/php/php-fpm.conf.diff
 gzip ./source/n/php/php.ini-development.diff
 gzip ./source/n/php/doinst.sh
 gzip ./source/n/alpine/alpine.manpage.diff
-gzip ./source/n/alpine/alpine.config.h.diff
 gzip ./source/n/alpine/alpine.tech-notes.txt.diff
 gzip ./source/n/alpine/pinepgp-0.18.0-makefile-sed-fix.diff
 gzip ./source/n/alpine/pinepgp.pinegpgp.in.diff
+gzip ./source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.pc.diff
 gzip ./source/n/obex-data-server/doinst.sh
+gzip ./source/n/NetworkManager/11-initialize-nm-remote-settings.patch
 gzip ./source/n/nn/nn.diff
 gzip ./source/n/nn/nntpserver
 gzip ./source/n/nn/nn.destdir.diff
@@ -307,7 +313,7 @@ gzip ./source/n/net-snmp/net-snmp.net-snmp-create-v3-user.etc.snmpd.conf.diff
 gzip ./source/n/net-snmp/doinst.sh
 gzip ./source/n/trn/config.sh
 gzip ./source/n/trn/config.x86_64.sh
-gzip ./source/n/iproute2/iproute2.fixup_dbpath_and_iptablespath.diff
+gzip ./source/n/iproute2/fixup-for-x86_64.diff
 gzip ./source/n/iproute2/doinst.sh
 gzip ./source/n/biff+comsat/biff+comsat.offset.diff
 gzip ./source/n/biff+comsat/biff+comsat-0.17.diff
@@ -326,6 +332,11 @@ gzip ./source/n/mutt/doinst.sh
 gzip ./source/n/bind/bind.so_bsdcompat.diff
 gzip ./source/n/bind/doinst.sh
 gzip ./source/n/openssl/openssl.optsx86.diff
+gzip ./source/n/openssl/openssl0/openssl.optsx86.diff
+gzip ./source/n/openssl/openssl0/openssl.soname.diff
+gzip ./source/n/openssl/openssl0/doinst.sh-openssl
+gzip ./source/n/openssl/openssl0/doinst.sh-openssl-solibs
+gzip ./source/n/openssl/openssl0/certwatch
 gzip ./source/n/openssl/openssl.soname.diff
 gzip ./source/n/openssl/doinst.sh-openssl
 gzip ./source/n/openssl/doinst.sh-openssl-solibs
@@ -351,12 +362,13 @@ gzip ./source/n/ppp/radius.msdict
 gzip ./source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch
 gzip ./source/n/autofs/doinst.sh
 gzip ./source/n/obexftp/ruby_rstringlen.diff
-gzip ./source/n/ca-certificates/cacerts-20090814-remove_debconf.diff
-gzip ./source/n/ca-certificates/cacerts-20090814-fixup_update-ca-certificates.diff
-gzip ./source/n/ca-certificates/cacerts-20090814-fixup_DESTDIR.diff
+gzip ./source/n/ca-certificates/patches/fixup_DESTDIR.diff
+gzip ./source/n/ca-certificates/patches/remove_debconf.diff
+gzip ./source/n/ca-certificates/patches/fixup_update-ca-certificates.diff
 gzip ./source/n/ca-certificates/doinst.sh
 gzip ./source/n/cyrus-sasl/rc.saslauthd
 gzip ./source/n/cyrus-sasl/doinst.sh
+gzip ./source/n/cyrus-sasl/cyrus-sasl.bad_elif.diff
 gzip ./source/n/vsftpd/vsftpd.log
 gzip ./source/n/vsftpd/vsftpd.conf.diff
 gzip ./source/n/vsftpd/doinst.sh
@@ -370,13 +382,15 @@ gzip ./source/n/netkit-ntalk/ntalk-0.17-slackware-alt-talkd.patch
 gzip ./source/n/netkit-ntalk/netkit-ntalk-0.17.diff
 gzip ./source/n/ntp/ntp.nano.diff
 gzip ./source/n/ntp/doinst.sh
-gzip ./source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff
 gzip ./source/installer/dhcpcd/config.h.diff
 gzip ./source/installer/dhcpcd/dhcpcd.sh.diff
+gzip ./source/installer/busybox.wget.P.diff
 gzip ./source/installer/busybox.2.6.32.2.diff
 gzip ./source/ap/hplip/doinst.sh
 gzip ./source/ap/xfsdump/xfsdump.destdir.diff
+gzip ./source/ap/screen/screen.d_termname.envterm.buffersizeincrease.diff
 gzip ./source/ap/sysstat/doinst.sh
+gzip ./source/ap/cdrdao/cdrdao-1.2.3-stat.patch
 gzip ./source/ap/ghostscript-fonts-std/doinst.sh
 gzip ./source/ap/groff/groff.man.mdoc.local
 gzip ./source/ap/cdrtools/doinst.sh
@@ -425,175 +439,666 @@ gzip ./source/ap/ash/patches/ash-redir.patch
 gzip ./source/ap/ash/patches/ash-jobs.patch
 gzip ./source/ap/dmidecode/dmidecode.makefile.diff
 gzip ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch
+gzip ./source/ap/nano/doinst.sh
 gzip ./source/ap/pm-utils/fix-wrong-path-in-intel-audio-powersave.patch
 gzip ./source/ap/pm-utils/use_more_sane_harddrive_defaults.patch
 gzip ./source/ap/sqlite/COPYRIGHT
 gzip ./source/ap/ghostscript/cidfmap
-gzip ./source/ap/ghostscript/ghostscript.rev11948.diff
 gzip ./source/ap/dmapi/dmapi.destdir.diff
 gzip ./source/ap/rpm/doinst.sh
 gzip ./source/ap/rpm/Packages
 gzip ./source/ap/at/doinst.sh
 gzip ./source/ap/mysql/rc.mysqld
 gzip ./source/ap/mysql/doinst.sh
-gzip ./source/ap/mc/mc.ext.in.geeqie.diff
+gzip ./source/ap/mc/mc.image.sh.geeqie.diff
+gzip ./source/ap/mc/mc.save.file.diff
 gzip ./source/ap/foomatic-filters/doinst.sh
-gzip ./source/ap/zsh/zsh.regex.oh.bah.diff
 gzip ./source/ap/zsh/doinst.sh
 gzip ./source/ap/flac/flac.gcc45.diff
 gzip ./source/ap/flac/flac.man.diff
+gzip ./source/ap/vim/patches/7.3.449
+gzip ./source/ap/vim/patches/7.3.392
+gzip ./source/ap/vim/patches/7.3.231
+gzip ./source/ap/vim/patches/7.3.434
+gzip ./source/ap/vim/patches/7.3.438
+gzip ./source/ap/vim/patches/7.3.382
+gzip ./source/ap/vim/patches/7.3.545
+gzip ./source/ap/vim/patches/7.3.287
+gzip ./source/ap/vim/patches/7.3.363
+gzip ./source/ap/vim/patches/7.3.552
+gzip ./source/ap/vim/patches/7.3.334
+gzip ./source/ap/vim/patches/7.3.493
 gzip ./source/ap/vim/patches/7.3.115
+gzip ./source/ap/vim/patches/7.3.426
+gzip ./source/ap/vim/patches/7.3.337
 gzip ./source/ap/vim/patches/7.3.039
+gzip ./source/ap/vim/patches/7.3.460
+gzip ./source/ap/vim/patches/7.3.344
+gzip ./source/ap/vim/patches/7.3.625
 gzip ./source/ap/vim/patches/7.3.013
 gzip ./source/ap/vim/patches/7.3.112
+gzip ./source/ap/vim/patches/7.3.604
 gzip ./source/ap/vim/patches/7.3.090
 gzip ./source/ap/vim/patches/7.3.034
 gzip ./source/ap/vim/patches/7.3.054
 gzip ./source/ap/vim/patches/7.3.061
+gzip ./source/ap/vim/patches/7.3.180
 gzip ./source/ap/vim/patches/7.3.101
+gzip ./source/ap/vim/patches/7.3.610
+gzip ./source/ap/vim/patches/7.3.259
+gzip ./source/ap/vim/patches/7.3.427
+gzip ./source/ap/vim/patches/7.3.562
 gzip ./source/ap/vim/patches/7.3.011
+gzip ./source/ap/vim/patches/7.3.233
 gzip ./source/ap/vim/patches/7.3.131
+gzip ./source/ap/vim/patches/7.3.325
+gzip ./source/ap/vim/patches/7.3.411
+gzip ./source/ap/vim/patches/7.3.592
+gzip ./source/ap/vim/patches/7.3.558
+gzip ./source/ap/vim/patches/7.3.178
+gzip ./source/ap/vim/patches/7.3.248
+gzip ./source/ap/vim/patches/7.3.529
 gzip ./source/ap/vim/patches/7.3.153
+gzip ./source/ap/vim/patches/7.3.213
+gzip ./source/ap/vim/patches/7.3.451
+gzip ./source/ap/vim/patches/7.3.306
 gzip ./source/ap/vim/patches/7.3.110
 gzip ./source/ap/vim/patches/7.3.150
+gzip ./source/ap/vim/patches/7.3.195
 gzip ./source/ap/vim/patches/7.3.002
+gzip ./source/ap/vim/patches/7.3.565
+gzip ./source/ap/vim/patches/7.3.450
+gzip ./source/ap/vim/patches/7.3.516
 gzip ./source/ap/vim/patches/7.3.059
+gzip ./source/ap/vim/patches/7.3.633
+gzip ./source/ap/vim/patches/7.3.561
+gzip ./source/ap/vim/patches/7.3.403
+gzip ./source/ap/vim/patches/7.3.494
+gzip ./source/ap/vim/patches/7.3.176
+gzip ./source/ap/vim/patches/7.3.398
 gzip ./source/ap/vim/patches/7.3.089
+gzip ./source/ap/vim/patches/7.3.553
+gzip ./source/ap/vim/patches/7.3.387
 gzip ./source/ap/vim/patches/7.3.132
+gzip ./source/ap/vim/patches/7.3.290
 gzip ./source/ap/vim/patches/7.3.117
+gzip ./source/ap/vim/patches/7.3.238
 gzip ./source/ap/vim/patches/7.3.111
+gzip ./source/ap/vim/patches/7.3.220
+gzip ./source/ap/vim/patches/7.3.242
+gzip ./source/ap/vim/patches/7.3.444
+gzip ./source/ap/vim/patches/7.3.520
+gzip ./source/ap/vim/patches/7.3.356
+gzip ./source/ap/vim/patches/7.3.464
 gzip ./source/ap/vim/patches/7.3.074
+gzip ./source/ap/vim/patches/7.3.409
+gzip ./source/ap/vim/patches/7.3.466
+gzip ./source/ap/vim/patches/7.3.640
+gzip ./source/ap/vim/patches/7.3.401
+gzip ./source/ap/vim/patches/7.3.187
 gzip ./source/ap/vim/patches/7.3.024
+gzip ./source/ap/vim/patches/7.3.467
 gzip ./source/ap/vim/patches/7.3.038
+gzip ./source/ap/vim/patches/7.3.571
+gzip ./source/ap/vim/patches/7.3.204
+gzip ./source/ap/vim/patches/7.3.320
+gzip ./source/ap/vim/patches/7.3.400
+gzip ./source/ap/vim/patches/7.3.284
+gzip ./source/ap/vim/patches/7.3.473
+gzip ./source/ap/vim/patches/7.3.192
 gzip ./source/ap/vim/patches/7.3.069
+gzip ./source/ap/vim/patches/7.3.197
+gzip ./source/ap/vim/patches/7.3.617
+gzip ./source/ap/vim/patches/7.3.437
 gzip ./source/ap/vim/patches/7.3.104
+gzip ./source/ap/vim/patches/7.3.244
+gzip ./source/ap/vim/patches/7.3.513
+gzip ./source/ap/vim/patches/7.3.158
+gzip ./source/ap/vim/patches/7.3.557
+gzip ./source/ap/vim/patches/7.3.203
+gzip ./source/ap/vim/patches/7.3.367
 gzip ./source/ap/vim/patches/7.3.124
+gzip ./source/ap/vim/patches/7.3.261
+gzip ./source/ap/vim/patches/7.3.355
+gzip ./source/ap/vim/patches/7.3.499
+gzip ./source/ap/vim/patches/7.3.454
 gzip ./source/ap/vim/patches/7.3.085
+gzip ./source/ap/vim/patches/7.3.331
+gzip ./source/ap/vim/patches/7.3.608
+gzip ./source/ap/vim/patches/7.3.452
+gzip ./source/ap/vim/patches/7.3.265
 gzip ./source/ap/vim/patches/7.3.068
+gzip ./source/ap/vim/patches/7.3.205
+gzip ./source/ap/vim/patches/7.3.597
 gzip ./source/ap/vim/patches/7.3.100
+gzip ./source/ap/vim/patches/7.3.408
+gzip ./source/ap/vim/patches/7.3.482
+gzip ./source/ap/vim/patches/7.3.547
 gzip ./source/ap/vim/patches/7.3.077
 gzip ./source/ap/vim/patches/7.3.136
+gzip ./source/ap/vim/patches/7.3.243
 gzip ./source/ap/vim/patches/7.3.120
 gzip ./source/ap/vim/patches/7.3.071
+gzip ./source/ap/vim/patches/7.3.251
+gzip ./source/ap/vim/patches/7.3.481
+gzip ./source/ap/vim/patches/7.3.406
+gzip ./source/ap/vim/patches/7.3.385
 gzip ./source/ap/vim/patches/7.3.129
 gzip ./source/ap/vim/patches/7.3.137
+gzip ./source/ap/vim/patches/7.3.274
+gzip ./source/ap/vim/patches/7.3.602
+gzip ./source/ap/vim/patches/7.3.397
+gzip ./source/ap/vim/patches/7.3.631
+gzip ./source/ap/vim/patches/7.3.607
+gzip ./source/ap/vim/patches/7.3.388
+gzip ./source/ap/vim/patches/7.3.570
 gzip ./source/ap/vim/patches/7.3.062
 gzip ./source/ap/vim/patches/7.3.116
+gzip ./source/ap/vim/patches/7.3.639
+gzip ./source/ap/vim/patches/7.3.634
+gzip ./source/ap/vim/patches/7.3.579
+gzip ./source/ap/vim/patches/7.3.477
+gzip ./source/ap/vim/patches/7.3.504
+gzip ./source/ap/vim/patches/7.3.445
+gzip ./source/ap/vim/patches/7.3.237
+gzip ./source/ap/vim/patches/7.3.373
+gzip ./source/ap/vim/patches/7.3.544
+gzip ./source/ap/vim/patches/7.3.267
+gzip ./source/ap/vim/patches/7.3.268
+gzip ./source/ap/vim/patches/7.3.542
+gzip ./source/ap/vim/patches/7.3.429
 gzip ./source/ap/vim/patches/7.3.144
 gzip ./source/ap/vim/patches/7.3.064
+gzip ./source/ap/vim/patches/7.3.368
+gzip ./source/ap/vim/patches/7.3.496
+gzip ./source/ap/vim/patches/7.3.393
+gzip ./source/ap/vim/patches/7.3.186
+gzip ./source/ap/vim/patches/7.3.568
+gzip ./source/ap/vim/patches/7.3.208
+gzip ./source/ap/vim/patches/7.3.515
+gzip ./source/ap/vim/patches/7.3.638
+gzip ./source/ap/vim/patches/7.3.379
+gzip ./source/ap/vim/patches/7.3.390
+gzip ./source/ap/vim/patches/7.3.554
+gzip ./source/ap/vim/patches/7.3.563
+gzip ./source/ap/vim/patches/7.3.169
 gzip ./source/ap/vim/patches/7.3.093
+gzip ./source/ap/vim/patches/7.3.371
+gzip ./source/ap/vim/patches/7.3.430
+gzip ./source/ap/vim/patches/7.3.354
 gzip ./source/ap/vim/patches/7.3.032
 gzip ./source/ap/vim/patches/7.3.008
+gzip ./source/ap/vim/patches/7.3.615
+gzip ./source/ap/vim/patches/7.3.589
+gzip ./source/ap/vim/patches/7.3.340
+gzip ./source/ap/vim/patches/7.3.316
+gzip ./source/ap/vim/patches/7.3.543
+gzip ./source/ap/vim/patches/7.3.161
+gzip ./source/ap/vim/patches/7.3.623
 gzip ./source/ap/vim/patches/7.3.004
+gzip ./source/ap/vim/patches/7.3.342
+gzip ./source/ap/vim/patches/7.3.432
+gzip ./source/ap/vim/patches/7.3.459
+gzip ./source/ap/vim/patches/7.3.478
+gzip ./source/ap/vim/patches/7.3.582
+gzip ./source/ap/vim/patches/7.3.210
+gzip ./source/ap/vim/patches/7.3.628
 gzip ./source/ap/vim/patches/7.3.126
+gzip ./source/ap/vim/patches/7.3.228
+gzip ./source/ap/vim/patches/7.3.361
+gzip ./source/ap/vim/patches/7.3.165
 gzip ./source/ap/vim/patches/7.3.147
+gzip ./source/ap/vim/patches/7.3.488
+gzip ./source/ap/vim/patches/7.3.370
+gzip ./source/ap/vim/patches/7.3.572
+gzip ./source/ap/vim/patches/7.3.509
 gzip ./source/ap/vim/patches/7.3.138
+gzip ./source/ap/vim/patches/7.3.275
+gzip ./source/ap/vim/patches/7.3.518
+gzip ./source/ap/vim/patches/7.3.246
+gzip ./source/ap/vim/patches/7.3.281
+gzip ./source/ap/vim/patches/7.3.577
+gzip ./source/ap/vim/patches/7.3.212
+gzip ./source/ap/vim/patches/7.3.202
+gzip ./source/ap/vim/patches/7.3.190
+gzip ./source/ap/vim/patches/7.3.428
 gzip ./source/ap/vim/patches/7.3.006
+gzip ./source/ap/vim/patches/7.3.599
+gzip ./source/ap/vim/patches/7.3.611
+gzip ./source/ap/vim/patches/7.3.421
+gzip ./source/ap/vim/patches/7.3.624
+gzip ./source/ap/vim/patches/7.3.303
+gzip ./source/ap/vim/patches/7.3.184
+gzip ./source/ap/vim/patches/7.3.221
+gzip ./source/ap/vim/patches/7.3.252
+gzip ./source/ap/vim/patches/7.3.170
+gzip ./source/ap/vim/patches/7.3.391
+gzip ./source/ap/vim/patches/7.3.512
+gzip ./source/ap/vim/patches/7.3.327
+gzip ./source/ap/vim/patches/7.3.270
 gzip ./source/ap/vim/patches/7.3.028
+gzip ./source/ap/vim/patches/7.3.182
+gzip ./source/ap/vim/patches/7.3.433
+gzip ./source/ap/vim/patches/7.3.455
+gzip ./source/ap/vim/patches/7.3.282
+gzip ./source/ap/vim/patches/7.3.479
 gzip ./source/ap/vim/patches/7.3.073
+gzip ./source/ap/vim/patches/7.3.317
+gzip ./source/ap/vim/patches/7.3.637
+gzip ./source/ap/vim/patches/7.3.328
 gzip ./source/ap/vim/patches/7.3.081
+gzip ./source/ap/vim/patches/7.3.321
 gzip ./source/ap/vim/patches/7.3.113
+gzip ./source/ap/vim/patches/7.3.297
+gzip ./source/ap/vim/patches/7.3.277
+gzip ./source/ap/vim/patches/7.3.308
+gzip ./source/ap/vim/patches/7.3.366
+gzip ./source/ap/vim/patches/7.3.505
 gzip ./source/ap/vim/patches/7.3.010
+gzip ./source/ap/vim/patches/7.3.380
+gzip ./source/ap/vim/patches/7.3.463
 gzip ./source/ap/vim/patches/7.3.088
+gzip ./source/ap/vim/patches/7.3.422
+gzip ./source/ap/vim/patches/7.3.510
+gzip ./source/ap/vim/patches/7.3.535
+gzip ./source/ap/vim/patches/7.3.254
 gzip ./source/ap/vim/patches/7.3.005
+gzip ./source/ap/vim/patches/7.3.405
+gzip ./source/ap/vim/patches/7.3.528
+gzip ./source/ap/vim/patches/7.3.336
+gzip ./source/ap/vim/patches/7.3.514
+gzip ./source/ap/vim/patches/7.3.372
+gzip ./source/ap/vim/patches/7.3.196
 gzip ./source/ap/vim/patches/7.3.070
+gzip ./source/ap/vim/patches/7.3.375
+gzip ./source/ap/vim/patches/7.3.636
+gzip ./source/ap/vim/patches/7.3.159
 gzip ./source/ap/vim/patches/7.3.094
+gzip ./source/ap/vim/patches/7.3.318
 gzip ./source/ap/vim/patches/7.3.001
+gzip ./source/ap/vim/patches/7.3.618
+gzip ./source/ap/vim/patches/7.3.273
+gzip ./source/ap/vim/patches/7.3.530
+gzip ./source/ap/vim/patches/7.3.593
+gzip ./source/ap/vim/patches/7.3.522
+gzip ./source/ap/vim/patches/7.3.376
+gzip ./source/ap/vim/patches/7.3.418
+gzip ./source/ap/vim/patches/7.3.335
+gzip ./source/ap/vim/patches/7.3.415
+gzip ./source/ap/vim/patches/7.3.613
+gzip ./source/ap/vim/patches/7.3.280
 gzip ./source/ap/vim/patches/7.3.146
+gzip ./source/ap/vim/patches/7.3.446
+gzip ./source/ap/vim/patches/7.3.262
+gzip ./source/ap/vim/patches/7.3.591
+gzip ./source/ap/vim/patches/7.3.349
+gzip ./source/ap/vim/patches/7.3.172
+gzip ./source/ap/vim/patches/7.3.556
+gzip ./source/ap/vim/patches/7.3.546
+gzip ./source/ap/vim/patches/7.3.191
+gzip ./source/ap/vim/patches/7.3.168
+gzip ./source/ap/vim/patches/7.3.357
+gzip ./source/ap/vim/patches/7.3.193
 gzip ./source/ap/vim/patches/7.3.029
 gzip ./source/ap/vim/patches/7.3.140
+gzip ./source/ap/vim/patches/7.3.224
+gzip ./source/ap/vim/patches/7.3.489
+gzip ./source/ap/vim/patches/7.3.209
+gzip ./source/ap/vim/patches/7.3.497
 gzip ./source/ap/vim/patches/7.3.119
 gzip ./source/ap/vim/patches/7.3.060
+gzip ./source/ap/vim/patches/7.3.431
 gzip ./source/ap/vim/patches/7.3.036
+gzip ./source/ap/vim/patches/7.3.348
+gzip ./source/ap/vim/patches/7.3.533
+gzip ./source/ap/vim/patches/7.3.263
 gzip ./source/ap/vim/patches/7.3.035
+gzip ./source/ap/vim/patches/7.3.491
 gzip ./source/ap/vim/patches/7.3.103
 gzip ./source/ap/vim/patches/7.3.122
+gzip ./source/ap/vim/patches/7.3.189
 gzip ./source/ap/vim/patches/7.3.123
 gzip ./source/ap/vim/patches/7.3.018
+gzip ./source/ap/vim/patches/7.3.525
+gzip ./source/ap/vim/patches/7.3.490
 gzip ./source/ap/vim/patches/7.3.106
+gzip ./source/ap/vim/patches/7.3.283
+gzip ./source/ap/vim/patches/7.3.576
+gzip ./source/ap/vim/patches/7.3.523
+gzip ./source/ap/vim/patches/7.3.266
+gzip ./source/ap/vim/patches/7.3.341
+gzip ./source/ap/vim/patches/7.3.474
+gzip ./source/ap/vim/patches/7.3.425
+gzip ./source/ap/vim/patches/7.3.595
+gzip ./source/ap/vim/patches/7.3.345
+gzip ./source/ap/vim/patches/7.3.642
+gzip ./source/ap/vim/patches/7.3.447
+gzip ./source/ap/vim/patches/7.3.302
+gzip ./source/ap/vim/patches/7.3.194
+gzip ./source/ap/vim/patches/7.3.521
+gzip ./source/ap/vim/patches/7.3.609
 gzip ./source/ap/vim/patches/7.3.154
+gzip ./source/ap/vim/patches/7.3.305
+gzip ./source/ap/vim/patches/7.3.423
+gzip ./source/ap/vim/patches/7.3.374
 gzip ./source/ap/vim/patches/7.3.040
+gzip ./source/ap/vim/patches/7.3.424
+gzip ./source/ap/vim/patches/7.3.517
+gzip ./source/ap/vim/patches/7.3.534
 gzip ./source/ap/vim/patches/7.3.086
+gzip ./source/ap/vim/patches/7.3.471
 gzip ./source/ap/vim/patches/7.3.053
+gzip ./source/ap/vim/patches/7.3.532
 gzip ./source/ap/vim/patches/7.3.072
+gzip ./source/ap/vim/patches/7.3.622
+gzip ./source/ap/vim/patches/7.3.555
+gzip ./source/ap/vim/patches/7.3.585
+gzip ./source/ap/vim/patches/7.3.255
+gzip ./source/ap/vim/patches/7.3.198
 gzip ./source/ap/vim/patches/7.3.075
 gzip ./source/ap/vim/patches/7.3.056
+gzip ./source/ap/vim/patches/7.3.185
+gzip ./source/ap/vim/patches/7.3.346
+gzip ./source/ap/vim/patches/7.3.457
+gzip ./source/ap/vim/patches/7.3.296
+gzip ./source/ap/vim/patches/7.3.389
+gzip ./source/ap/vim/patches/7.3.440
+gzip ./source/ap/vim/patches/7.3.495
 gzip ./source/ap/vim/patches/7.3.026
+gzip ./source/ap/vim/patches/7.3.173
 gzip ./source/ap/vim/patches/7.3.003
 gzip ./source/ap/vim/patches/7.3.145
+gzip ./source/ap/vim/patches/7.3.211
+gzip ./source/ap/vim/patches/7.3.588
 gzip ./source/ap/vim/patches/7.3.127
+gzip ./source/ap/vim/patches/7.3.206
+gzip ./source/ap/vim/patches/7.3.264
+gzip ./source/ap/vim/patches/7.3.395
+gzip ./source/ap/vim/patches/7.3.326
+gzip ./source/ap/vim/patches/7.3.350
 gzip ./source/ap/vim/patches/7.3.067
+gzip ./source/ap/vim/patches/7.3.352
+gzip ./source/ap/vim/patches/7.3.369
 gzip ./source/ap/vim/patches/7.3.102
+gzip ./source/ap/vim/patches/7.3.480
 gzip ./source/ap/vim/patches/7.3.015
+gzip ./source/ap/vim/patches/7.3.167
+gzip ./source/ap/vim/patches/7.3.200
+gzip ./source/ap/vim/patches/7.3.596
+gzip ./source/ap/vim/patches/7.3.164
+gzip ./source/ap/vim/patches/7.3.293
+gzip ./source/ap/vim/patches/7.3.439
+gzip ./source/ap/vim/patches/7.3.269
 gzip ./source/ap/vim/patches/7.3.019
+gzip ./source/ap/vim/patches/7.3.645
 gzip ./source/ap/vim/patches/7.3.151
+gzip ./source/ap/vim/patches/7.3.279
+gzip ./source/ap/vim/patches/7.3.524
 gzip ./source/ap/vim/patches/7.3.044
 gzip ./source/ap/vim/patches/7.3.091
+gzip ./source/ap/vim/patches/7.3.301
 gzip ./source/ap/vim/patches/7.3.142
+gzip ./source/ap/vim/patches/7.3.581
 gzip ./source/ap/vim/patches/7.3.021
+gzip ./source/ap/vim/patches/7.3.166
+gzip ./source/ap/vim/patches/7.3.567
+gzip ./source/ap/vim/patches/7.3.507
+gzip ./source/ap/vim/patches/7.3.311
+gzip ./source/ap/vim/patches/7.3.214
+gzip ./source/ap/vim/patches/7.3.245
+gzip ./source/ap/vim/patches/7.3.207
 gzip ./source/ap/vim/patches/7.3.017
+gzip ./source/ap/vim/patches/7.3.601
+gzip ./source/ap/vim/patches/7.3.584
 gzip ./source/ap/vim/patches/7.3.050
+gzip ./source/ap/vim/patches/7.3.626
+gzip ./source/ap/vim/patches/7.3.249
+gzip ./source/ap/vim/patches/7.3.294
+gzip ./source/ap/vim/patches/7.3.621
+gzip ./source/ap/vim/patches/7.3.381
+gzip ./source/ap/vim/patches/7.3.313
+gzip ./source/ap/vim/patches/7.3.347
 gzip ./source/ap/vim/patches/7.3.105
 gzip ./source/ap/vim/patches/7.3.114
+gzip ./source/ap/vim/patches/7.3.573
+gzip ./source/ap/vim/patches/7.3.351
+gzip ./source/ap/vim/patches/7.3.548
+gzip ./source/ap/vim/patches/7.3.410
+gzip ./source/ap/vim/patches/7.3.230
+gzip ./source/ap/vim/patches/7.3.574
 gzip ./source/ap/vim/patches/7.3.118
 gzip ./source/ap/vim/patches/7.3.048
 gzip ./source/ap/vim/patches/7.3.009
+gzip ./source/ap/vim/patches/7.3.420
 gzip ./source/ap/vim/patches/7.3.007
+gzip ./source/ap/vim/patches/7.3.292
+gzip ./source/ap/vim/patches/7.3.436
+gzip ./source/ap/vim/patches/7.3.569
+gzip ./source/ap/vim/patches/7.3.619
 gzip ./source/ap/vim/patches/7.3.037
+gzip ./source/ap/vim/patches/7.3.627
+gzip ./source/ap/vim/patches/7.3.353
+gzip ./source/ap/vim/patches/7.3.635
+gzip ./source/ap/vim/patches/7.3.299
+gzip ./source/ap/vim/patches/7.3.312
+gzip ./source/ap/vim/patches/7.3.234
+gzip ./source/ap/vim/patches/7.3.508
+gzip ./source/ap/vim/patches/7.3.594
+gzip ./source/ap/vim/patches/7.3.541
+gzip ./source/ap/vim/patches/7.3.442
+gzip ./source/ap/vim/patches/7.3.377
+gzip ./source/ap/vim/patches/7.3.587
+gzip ./source/ap/vim/patches/7.3.222
+gzip ./source/ap/vim/patches/7.3.309
 gzip ./source/ap/vim/patches/7.3.012
 gzip ./source/ap/vim/patches/7.3.141
+gzip ./source/ap/vim/patches/7.3.179
+gzip ./source/ap/vim/patches/7.3.453
 gzip ./source/ap/vim/patches/7.3.109
+gzip ./source/ap/vim/patches/7.3.364
+gzip ./source/ap/vim/patches/7.3.598
+gzip ./source/ap/vim/patches/7.3.383
+gzip ./source/ap/vim/patches/7.3.260
 gzip ./source/ap/vim/patches/7.3.125
+gzip ./source/ap/vim/patches/7.3.307
+gzip ./source/ap/vim/patches/7.3.240
+gzip ./source/ap/vim/patches/7.3.559
 gzip ./source/ap/vim/patches/7.3.087
+gzip ./source/ap/vim/patches/7.3.310
+gzip ./source/ap/vim/patches/7.3.276
+gzip ./source/ap/vim/patches/7.3.641
+gzip ./source/ap/vim/patches/7.3.181
+gzip ./source/ap/vim/patches/7.3.271
+gzip ./source/ap/vim/patches/7.3.225
 gzip ./source/ap/vim/patches/7.3.148
+gzip ./source/ap/vim/patches/7.3.575
+gzip ./source/ap/vim/patches/7.3.485
+gzip ./source/ap/vim/patches/7.3.590
+gzip ./source/ap/vim/patches/7.3.586
 gzip ./source/ap/vim/patches/7.3.023
+gzip ./source/ap/vim/patches/7.3.472
+gzip ./source/ap/vim/patches/7.3.330
+gzip ./source/ap/vim/patches/7.3.469
 gzip ./source/ap/vim/patches/7.3.033
+gzip ./source/ap/vim/patches/7.3.359
+gzip ./source/ap/vim/patches/7.3.502
+gzip ./source/ap/vim/patches/7.3.253
 gzip ./source/ap/vim/patches/7.3.065
 gzip ./source/ap/vim/patches/7.3.084
+gzip ./source/ap/vim/patches/7.3.498
+gzip ./source/ap/vim/patches/7.3.288
+gzip ./source/ap/vim/patches/7.3.580
+gzip ./source/ap/vim/patches/7.3.256
+gzip ./source/ap/vim/patches/7.3.483
+gzip ./source/ap/vim/patches/7.3.492
+gzip ./source/ap/vim/patches/7.3.536
 gzip ./source/ap/vim/patches/7.3.041
 gzip ./source/ap/vim/patches/7.3.057
 gzip ./source/ap/vim/patches/7.3.027
+gzip ./source/ap/vim/patches/7.3.217
+gzip ./source/ap/vim/patches/7.3.632
+gzip ./source/ap/vim/patches/7.3.298
 gzip ./source/ap/vim/patches/7.3.016
 gzip ./source/ap/vim/patches/7.3.049
 gzip ./source/ap/vim/patches/7.3.052
+gzip ./source/ap/vim/patches/7.3.219
+gzip ./source/ap/vim/patches/7.3.630
+gzip ./source/ap/vim/patches/7.3.155
+gzip ./source/ap/vim/patches/7.3.386
+gzip ./source/ap/vim/patches/7.3.456
+gzip ./source/ap/vim/patches/7.3.500
+gzip ./source/ap/vim/patches/7.3.239
 gzip ./source/ap/vim/patches/7.3.080
+gzip ./source/ap/vim/patches/7.3.560
 gzip ./source/ap/vim/patches/7.3.134
+gzip ./source/ap/vim/patches/7.3.616
 gzip ./source/ap/vim/patches/7.3.135
+gzip ./source/ap/vim/patches/7.3.365
 gzip ./source/ap/vim/patches/7.3.079
 gzip ./source/ap/vim/patches/7.3.096
 gzip ./source/ap/vim/patches/7.3.078
 gzip ./source/ap/vim/patches/7.3.092
 gzip ./source/ap/vim/patches/7.3.108
+gzip ./source/ap/vim/patches/7.3.232
+gzip ./source/ap/vim/patches/7.3.300
+gzip ./source/ap/vim/patches/7.3.550
 gzip ./source/ap/vim/patches/7.3.149
+gzip ./source/ap/vim/patches/7.3.216
+gzip ./source/ap/vim/patches/7.3.461
+gzip ./source/ap/vim/patches/7.3.414
+gzip ./source/ap/vim/patches/7.3.329
+gzip ./source/ap/vim/patches/7.3.236
 gzip ./source/ap/vim/patches/7.3.099
+gzip ./source/ap/vim/patches/7.3.171
+gzip ./source/ap/vim/patches/7.3.188
 gzip ./source/ap/vim/patches/7.3.043
+gzip ./source/ap/vim/patches/7.3.339
+gzip ./source/ap/vim/patches/7.3.278
 gzip ./source/ap/vim/patches/7.3.020
 gzip ./source/ap/vim/patches/7.3.152
+gzip ./source/ap/vim/patches/7.3.531
+gzip ./source/ap/vim/patches/7.3.564
+gzip ./source/ap/vim/patches/7.3.417
+gzip ./source/ap/vim/patches/7.3.235
+gzip ./source/ap/vim/patches/7.3.250
 gzip ./source/ap/vim/patches/7.3.082
+gzip ./source/ap/vim/patches/7.3.157
+gzip ./source/ap/vim/patches/7.3.215
+gzip ./source/ap/vim/patches/7.3.384
+gzip ./source/ap/vim/patches/7.3.551
 gzip ./source/ap/vim/patches/7.3.128
+gzip ./source/ap/vim/patches/7.3.487
+gzip ./source/ap/vim/patches/7.3.183
+gzip ./source/ap/vim/patches/7.3.322
+gzip ./source/ap/vim/patches/7.3.600
+gzip ./source/ap/vim/patches/7.3.503
+gzip ./source/ap/vim/patches/7.3.226
 gzip ./source/ap/vim/patches/7.3.031
+gzip ./source/ap/vim/patches/7.3.396
+gzip ./source/ap/vim/patches/7.3.362
 gzip ./source/ap/vim/patches/7.3.022
 gzip ./source/ap/vim/patches/7.3.066
+gzip ./source/ap/vim/patches/7.3.323
 gzip ./source/ap/vim/patches/7.3.046
 gzip ./source/ap/vim/patches/7.3.042
+gzip ./source/ap/vim/patches/7.3.295
+gzip ./source/ap/vim/patches/7.3.540
 gzip ./source/ap/vim/patches/7.3.098
 gzip ./source/ap/vim/patches/7.3.083
+gzip ./source/ap/vim/patches/7.3.603
+gzip ./source/ap/vim/patches/7.3.163
+gzip ./source/ap/vim/patches/7.3.404
+gzip ./source/ap/vim/patches/7.3.612
 gzip ./source/ap/vim/patches/7.3.051
+gzip ./source/ap/vim/patches/7.3.644
+gzip ./source/ap/vim/patches/7.3.291
 gzip ./source/ap/vim/patches/7.3.139
+gzip ./source/ap/vim/patches/7.3.289
+gzip ./source/ap/vim/patches/7.3.538
+gzip ./source/ap/vim/patches/7.3.174
+gzip ./source/ap/vim/patches/7.3.468
+gzip ./source/ap/vim/patches/7.3.201
+gzip ./source/ap/vim/patches/7.3.223
+gzip ./source/ap/vim/patches/7.3.343
 gzip ./source/ap/vim/patches/7.3.014
+gzip ./source/ap/vim/patches/7.3.465
+gzip ./source/ap/vim/patches/7.3.314
+gzip ./source/ap/vim/patches/7.3.486
+gzip ./source/ap/vim/patches/7.3.315
+gzip ./source/ap/vim/patches/7.3.402
+gzip ./source/ap/vim/patches/7.3.629
+gzip ./source/ap/vim/patches/7.3.537
+gzip ./source/ap/vim/patches/7.3.241
 gzip ./source/ap/vim/patches/7.3.063
+gzip ./source/ap/vim/patches/7.3.416
+gzip ./source/ap/vim/patches/7.3.227
+gzip ./source/ap/vim/patches/7.3.338
+gzip ./source/ap/vim/patches/7.3.304
+gzip ./source/ap/vim/patches/7.3.378
+gzip ./source/ap/vim/patches/7.3.476
+gzip ./source/ap/vim/patches/7.3.566
+gzip ./source/ap/vim/patches/7.3.605
+gzip ./source/ap/vim/patches/7.3.443
+gzip ./source/ap/vim/patches/7.3.324
+gzip ./source/ap/vim/patches/7.3.614
+gzip ./source/ap/vim/patches/7.3.419
+gzip ./source/ap/vim/patches/7.3.286
+gzip ./source/ap/vim/patches/7.3.484
 gzip ./source/ap/vim/patches/7.3.058
+gzip ./source/ap/vim/patches/7.3.229
+gzip ./source/ap/vim/patches/7.3.162
 gzip ./source/ap/vim/patches/7.3.095
+gzip ./source/ap/vim/patches/7.3.175
+gzip ./source/ap/vim/patches/7.3.441
+gzip ./source/ap/vim/patches/7.3.501
 gzip ./source/ap/vim/patches/7.3.055
+gzip ./source/ap/vim/patches/7.3.506
+gzip ./source/ap/vim/patches/7.3.199
+gzip ./source/ap/vim/patches/7.3.407
+gzip ./source/ap/vim/patches/7.3.272
+gzip ./source/ap/vim/patches/7.3.539
+gzip ./source/ap/vim/patches/7.3.399
+gzip ./source/ap/vim/patches/7.3.549
+gzip ./source/ap/vim/patches/7.3.448
+gzip ./source/ap/vim/patches/7.3.257
+gzip ./source/ap/vim/patches/7.3.218
+gzip ./source/ap/vim/patches/7.3.285
 gzip ./source/ap/vim/patches/7.3.121
+gzip ./source/ap/vim/patches/7.3.458
+gzip ./source/ap/vim/patches/7.3.358
+gzip ./source/ap/vim/patches/7.3.527
 gzip ./source/ap/vim/patches/7.3.030
+gzip ./source/ap/vim/patches/7.3.360
+gzip ./source/ap/vim/patches/7.3.475
+gzip ./source/ap/vim/patches/7.3.413
+gzip ./source/ap/vim/patches/7.3.606
+gzip ./source/ap/vim/patches/7.3.519
+gzip ./source/ap/vim/patches/7.3.435
+gzip ./source/ap/vim/patches/7.3.620
+gzip ./source/ap/vim/patches/7.3.332
 gzip ./source/ap/vim/patches/7.3.097
+gzip ./source/ap/vim/patches/7.3.160
 gzip ./source/ap/vim/patches/7.3.143
+gzip ./source/ap/vim/patches/7.3.583
+gzip ./source/ap/vim/patches/7.3.511
+gzip ./source/ap/vim/patches/7.3.462
 gzip ./source/ap/vim/patches/7.3.130
+gzip ./source/ap/vim/patches/7.3.156
+gzip ./source/ap/vim/patches/7.3.643
+gzip ./source/ap/vim/patches/7.3.578
+gzip ./source/ap/vim/patches/7.3.470
+gzip ./source/ap/vim/patches/7.3.258
+gzip ./source/ap/vim/patches/7.3.394
+gzip ./source/ap/vim/patches/7.3.247
+gzip ./source/ap/vim/patches/7.3.177
+gzip ./source/ap/vim/patches/7.3.333
 gzip ./source/ap/vim/patches/7.3.045
 gzip ./source/ap/vim/patches/7.3.076
 gzip ./source/ap/vim/patches/7.3.107
+gzip ./source/ap/vim/patches/7.3.319
+gzip ./source/ap/vim/patches/7.3.526
 gzip ./source/ap/vim/patches/7.3.025
+gzip ./source/ap/vim/patches/7.3.412
 gzip ./source/ap/vim/patches/7.3.133
 gzip ./source/ap/vim/patches/7.3.047
 gzip ./source/ap/vim/vim-runtime-syntax-20110328.diff
@@ -605,21 +1110,25 @@ gzip ./source/ap/a2ps/psutils.diff
 gzip ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff
 gzip ./source/ap/lm_sensors/lm_sensors.makefile.diff
 gzip ./source/d/autoconf/doinst.sh
-gzip ./source/d/oprofile/oprofile.qt4.diff
+gzip ./source/d/oprofile/oprofile.binutils.diff
 gzip ./source/d/mercurial/doinst.sh
+gzip ./source/d/cmake/cmake.findpkgconfig.3ea850.patch
 gzip ./source/d/libtool/libtool.no.moved.warning.diff
 gzip ./source/d/libtool/doinst.sh
 gzip ./source/d/rcs/rcs-5.7.diff
 gzip ./source/d/dev86/dev86-x86_64.noelks.patch
 gzip ./source/d/dev86/dev86-x86_64.patch
+gzip ./source/d/automake/automake.perl516.prototype.diff
 gzip ./source/d/automake/doinst.sh
+gzip ./source/d/python/python.no-static-library.diff
 gzip ./source/d/python/python.readline.set_pre_input_hook.diff
-gzip ./source/d/python/python.pure64.diff
 gzip ./source/d/python/python.x86_64.diff
 gzip ./source/d/pmake/pmake.strerror.strdup.diff
 gzip ./source/d/pmake/pmake.txt
 gzip ./source/d/pmake/pmake_1.111-1.diff
 gzip ./source/d/pkg-config/doinst.sh
+gzip ./source/d/make/make-3.82-android-build-fix.diff
+gzip ./source/d/gcc/gcc-4.7.1.adalib.pic.diff
 gzip ./source/d/gcc/fastjar-patches/1004-fastjar-man.patch
 gzip ./source/d/gcc/fastjar-patches/1002-fastjar-0.97-filename0.patch
 gzip ./source/d/gcc/fastjar-patches/1000-fastjar-0.97-segfault.patch
@@ -634,37 +1143,26 @@ gzip ./source/xap/rxvt/rxvt.utempter.diff
 gzip ./source/xap/xmms/xmms.gtk.doublesize.diff
 gzip ./source/xap/xmms/xmms.wmxmms_vis_depth_workaround.diff
 gzip ./source/xap/gftp/gftp.desktop
-gzip ./source/xap/gv/gv.keysym.diff
-gzip ./source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff
-gzip ./source/xap/xfce/patches/xfce-utils-load_systemwide_Xmodmap.diff
-gzip ./source/xap/xfce/patches/Thunar.thunar-vfs-io-local.diff
-gzip ./source/xap/xfce/patches/thunar-1.0.2-fixup_docdir.diff
-gzip ./source/xap/xfce/patches/xfsm-compat-kde.c-start-kde4-services.diff
-gzip ./source/xap/xfce/patches/xfdesktop-fix_education_icon.diff
-gzip ./source/xap/xfce/patches/xfcalendar.desktop.in.diff
-gzip ./source/xap/xfce/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff
-gzip ./source/xap/xfce/patches/mousepad-fix_find.diff
-gzip ./source/xap/xfce/patches/mousepad-fix_find_and_replace.diff
-gzip ./source/xap/xfce/patches/no_sensitive_panel_during_plugin_moves.patch
-gzip ./source/xap/xfce4-notifyd/doinst.sh
+gzip ./source/xap/gv/gv.libXaw3d.diff
 gzip ./source/xap/fluxbox/xinitrc.fluxbox
-gzip ./source/xap/mozilla-thunderbird/mimeTypes.rdf
+gzip ./source/xap/fluxbox/fluxbox.startfluxbox.dbus.diff
+gzip ./source/xap/mozilla-thunderbird/mozilla-firefox.xpcom_arm.patch
 gzip ./source/xap/xine-ui/xine.desktop
-gzip ./source/xap/xine-ui/xine-ui.png14.diff
-gzip ./source/xap/xfce4-power-manager/doinst.sh
+gzip ./source/xap/xine-ui/xine-ui.no.deprecated.curl.headers.diff
 gzip ./source/xap/geeqie/doinst.sh
 gzip ./source/xap/gkrellm/gkrellm.theme.defaults.diff
 gzip ./source/xap/x3270/doinst.sh
 gzip ./source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch
+gzip ./source/xap/blackbox/textpropertytostring-unconditional.diff
 gzip ./source/xap/blackbox/xinitrc.blackbox
-gzip ./source/xap/windowmaker/windowmaker.no-mmx.diff
-gzip ./source/xap/windowmaker/windowmaker.png.1.4.0.diff
+gzip ./source/xap/blackbox/startblackbox
 gzip ./source/xap/windowmaker/wmaker.inst.diff
+gzip ./source/xap/windowmaker/WindowMaker.noopensusemenu.diff
 gzip ./source/xap/windowmaker/xinitrc.wmaker
 gzip ./source/xap/audacious/doinst.sh
 gzip ./source/xap/electricsheep/electricsheep.mplayer.diff
 gzip ./source/xap/gucharmap/doinst.sh
-gzip ./source/xap/pidgin/purple-allow-sign-rsa-md5.patch
+gzip ./source/xap/pidgin/fix-gmain_h-compile-error.diff
 gzip ./source/xap/xgames/xlander-2009-07-18.diff
 gzip ./source/xap/xgames/xcolormap.diff
 gzip ./source/xap/xgames/spider.diff
@@ -675,17 +1173,19 @@ gzip ./source/xap/xscreensaver/setuid.c
 gzip ./source/xap/xscreensaver/xscreensaver.setuid.diff
 gzip ./source/xap/xscreensaver/xscreensaver.electricsheep.diff
 gzip ./source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff
+gzip ./source/xap/sane/sane-backends-1.0.22-v4l.diff
 gzip ./source/xap/sane/doinst.sh
 gzip ./source/xap/sane/dll.conf.additions
+gzip ./source/xap/pan/pan.gcc47.diff
 gzip ./source/xap/seamonkey/doinst.sh
 gzip ./source/xap/gnuchess/eboard.assert.diff
-gzip ./source/xap/audacious-plugins/audacious-plugins.alsa.noise.is.not.helpful.diff
 gzip ./source/xap/xine-lib/xine-lib.XvMClib.h.diff
 gzip ./source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff
 gzip ./source/xap/blueman/doinst.sh
 gzip ./source/xap/xpdf/patches/xpdf-resizefix.diff
 gzip ./source/xap/xpdf/patches/xpdfrc.diff
 gzip ./source/xap/xpdf/patches/xpdf_3.02-1.3.diff
+gzip ./source/xap/xpdf/patches/03-float.patch
 gzip ./source/xap/xpdf/doinst.sh
 gzip ./source/xap/xpdf/lang/xpdf-hebrew.diff
 gzip ./source/xap/xpdf/lang/xpdf-thai.diff
@@ -701,18 +1201,17 @@ gzip ./source/xap/xpdf/lang/xpdf-latin2.diff
 gzip ./source/xap/seyon/seyon_2.20c-16.diff
 gzip ./source/xap/xaos/xaos.6
 gzip ./source/xap/xlockmore/xlockmore.bitmap.diff
+gzip ./source/xap/fvwm/startfvwm2
 gzip ./source/xap/fvwm/xinitrc.fvwm2
-gzip ./source/xap/fvwm/fvwm.colormap.diff
 gzip ./source/xap/fvwm/doinst.sh
-gzip ./source/xap/fvwm/system.fvwm2rc
 gzip ./source/xap/xv/xv.jasper.diff
 gzip ./source/xap/xv/xv.prefix_x86_64.diff
 gzip ./source/xap/xv/xv.prefix.diff
 gzip ./source/xap/xv/xv-3.10a.patch
+gzip ./source/xap/network-manager-applet/doinst.sh
 gzip ./source/xap/mozilla-firefox/mozilla-firefox-mimeTypes-fix.diff
 gzip ./source/xap/mozilla-firefox/firefox.moz_plugin_path.diff
 gzip ./source/xap/mozilla-firefox/mimeTypes.rdf
-gzip ./source/xap/rdesktop/rdesktop.CVE-2011-1595.diff
 gzip ./source/x/xdg-user-dirs/doinst.sh
 gzip ./source/x/x11-skel/doinst.sh
 gzip ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch
@@ -723,20 +1222,16 @@ gzip ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent.cpp.pat
 gzip ./source/x/scim-bridge/patches/scim-bridge-0.4.16-scim-bridge-agent-imcontext.cpp.patch
 gzip ./source/x/x11/post-install/xorg-cf-files/x11.tmpl.lib64.kludge.diff
 gzip ./source/x/x11/post-install/libX11/XKeysymDB
-gzip ./source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff
 gzip ./source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff
-gzip ./source/x/x11/patch/xorg-server/xorg-server.try_nouveau.diff
 gzip ./source/x/x11/patch/xcompmgr/xcompmgr-follow-icccm-spec.diff
 gzip ./source/x/ttf-indic-fonts/ttf-indic-fonts.copyright.diff
 gzip ./source/x/ttf-indic-fonts/doinst.sh
 gzip ./source/x/scim-hangul/scim-hangul.gcc43.diff
+gzip ./source/x/scim-hangul/scim-hangul.gcc47.diff
 gzip ./source/x/xdg-utils/doinst.sh
 gzip ./source/x/liberation-fonts-ttf/doinst.sh
-gzip ./source/x/libdrm/libdrm.uint32_t.diff
-gzip ./source/x/mesa/patches/i915_fragment_shader_disable.patch
-gzip ./source/x/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
+gzip ./source/x/xterm/doinst.sh
 gzip ./source/x/scim-anthy/scim-anthy.gcc43.diff
-gzip ./source/x/scim/scim-1.4.9-fix-ltdl.cpp.patch
 gzip ./source/x/dejavu-fonts-ttf/doinst.sh
 gzip ./source/x/fontconfig/fontconfig.dejavu.diff
 gzip ./source/x/fontconfig/doinst.sh
@@ -780,55 +1275,15 @@ gzip ./source/y/bsd-games/bsd-games.strfile.8.diff
 gzip ./source/y/bsd-games/bsd-games.phantasia_install_fix.diff
 gzip ./source/y/bsd-games/bsd-games.fortlen.diff
 gzip ./source/y/bsd-games/bsd-games.trek-gcc4.diff
+gzip ./source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here/20120302.diff
 gzip ./source/y/bsd-games/hangman-words
 gzip ./source/y/bsd-games/bsd-games.pom.diff
 gzip ./source/y/bsd-games/bsd-games.fortunepath.diff
-gzip ./source/kde/kdeutils/doinst.sh
-gzip ./source/kde/kdemultimedia/doinst.sh
-gzip ./source/kde/kdeadmin/doinst.sh
-gzip ./source/kde/kdeadmin/knetworkconf.diff
-gzip ./source/kde/k3b/doinst.sh
-gzip ./source/kde/polkit-qt-1/polkit-qt-1.null-checking.diff
-gzip ./source/kde/kdeartwork/doinst.sh
-gzip ./source/kde/amarok/doinst.sh
-gzip ./source/kde/ktorrent/doinst.sh
-gzip ./source/kde/kdepim-runtime/doinst.sh
-gzip ./source/kde/kaudiocreator/doinst.sh
-gzip ./source/kde/kdenetwork/doinst.sh
-gzip ./source/kde/kdebindings/pykdeuic4.patch
-gzip ./source/kde/kdebindings/kdebindings-ruby-env.h.diff
-gzip ./source/kde/kdebindings/kdebindings.1170602.sip_4_11_x.diff
-gzip ./source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff
-gzip ./source/kde/kdebindings/kdebindings-rubyconfig.h.diff
-gzip ./source/kde/kdebase-runtime/doinst.sh
-gzip ./source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff
-gzip ./source/kde/kdebase-workspace/doinst.sh
-gzip ./source/kde/kdepimlibs/kdepimlibs-4.5.imap4.cpp.r1216162.diff
-gzip ./source/kde/kdetoys/doinst.sh
-gzip ./source/kde/kdewebdev/include-tidy.patch
-gzip ./source/kde/kdewebdev/doinst.sh
-gzip ./source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff
-gzip ./source/kde/kdepim/doinst.sh
-gzip ./source/kde/kdeedu/doinst.sh
-gzip ./source/kde/kdeaccessibility/doinst.sh
-gzip ./source/kde/kdeplasma-addons/doinst.sh
-gzip ./source/kde/polkit-kde-1/polkit-kde-1.nodrkonqi.diff
-gzip ./source/kde/kdegraphics/doinst.sh
-gzip ./source/kde/kdebase/konsole_right_click-185466.patch.patch
-gzip ./source/kde/kdebase/konsole_right_click-185466.patch
-gzip ./source/kde/kdebase/doinst.sh
-gzip ./source/kde/skanlite/doinst.sh
-gzip ./source/kde/koffice/doinst.sh
-gzip ./source/kde/kdegames/doinst.sh
-gzip ./source/kde/kdevplatform/doinst.sh
-gzip ./source/kde/kdevelop/doinst.sh
-gzip ./source/kde/konq-plugins/konq-plugins-4.4.0-qt47.patch
-gzip ./source/kde/kdelibs/kdelibs.khtml.CVE-2011-1168.diff
-gzip ./source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch
-gzip ./source/kde/kdelibs/doinst.sh
-gzip ./source/kde/kdelibs/kdelibs.docbook.patch
-gzip ./source/kde/kdesdk/doinst.sh
-gzip ./source/kde/kopete-cryptography/doinst.sh
+gzip ./source/kde/patch/calligra/calligra.words.fix_overflow.diff
+gzip ./source/kde/patch/kdewebdev/include-tidy.patch
+gzip ./source/kde/patch/kde-workspace/kde-workspace.kdm.server.timeout.diff
+gzip ./source/kde/patch/kde-workspace/kde-workspace.batteryapplet.diff
+gzip ./source/kde/patch/kdelibs/kdelibs.docbook.patch
 gzip ./source/e/emacs/doinst.sh
 gzip ./source/tcl/tix/tix.soname.patch
 gzip ./source/tcl/tix/tix.tcl8.5.patch
@@ -836,24 +1291,12 @@ gzip ./source/tcl/expect/expect.exp_main_tk.c.version.require.diff
 gzip ./source/tcl/hfsutils/hfsutils.errno.diff
 gzip ./source/tcl/tclx/tclx-8.4.configure.diff
 gzip ./source/tcl/tclx/tclx-8.4.gcc4.diff
-gzip ./source/l/hal/patches/fix_libusb_detection.diff
-gzip ./source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff
-gzip ./source/l/hal/patches/fix-hal-segfault.patch
-gzip ./source/l/hal/patches/10-keymap.fdi-restore_zap.diff
-gzip ./source/l/hal/patches/ignore_internal_dm_devices.diff
-gzip ./source/l/hal/patches/fix_ioperm_arguments.patch
-gzip ./source/l/hal/patches/fix-build-with-automake-1.11.1.patch
-gzip ./source/l/hal/patches/handle_input.touchpad_explicitly.diff
-gzip ./source/l/hal/patches/fix_segfault-dbus_error_init.patch
-gzip ./source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff
-gzip ./source/l/hal/hal.conf
-gzip ./source/l/hal/doinst.sh
-gzip ./source/l/hal/rc.hald
 gzip ./source/l/ncurses/ncurses.mkhashsize.diff
 gzip ./source/l/shared-mime-info/doinst.sh
 gzip ./source/l/loudmouth/loudmouth.async_assertion.diff
 gzip ./source/l/loudmouth/loudmouth.gnutls.configure.ac.diff
 gzip ./source/l/loudmouth/loudmouth.stanzadrop.diff
+gzip ./source/l/loudmouth/loudmouth-1.4.3-glib-compile-fix.patch
 gzip ./source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff
 gzip ./source/l/loudmouth/loudmouth.crtpath.diff
 gzip ./source/l/db42/patch.4.2.52.2
@@ -861,63 +1304,87 @@ gzip ./source/l/db42/patch.4.2.52.1
 gzip ./source/l/db42/patch.4.2.52.4
 gzip ./source/l/db42/patch.4.2.52.3
 gzip ./source/l/hicolor-icon-theme/doinst.sh
+gzip ./source/l/notify-python/libnotify07.patch
 gzip ./source/l/svgalib/svgalib.nohelper.diff
 gzip ./source/l/svgalib/svgalib-1.9.25-kernel-2.6.26.diff
 gzip ./source/l/svgalib/svgalib.prefix.diff
 gzip ./source/l/cairo/cairo-1.10.0-buggy_gradients.patch
+gzip ./source/l/libvisual/libvisual.glib.h.diff
 gzip ./source/l/urwid/LICENSE
 gzip ./source/l/djvulibre/doinst.sh
 gzip ./source/l/gd/gd.png14.diff
 gzip ./source/l/glib2/doinst.sh
-gzip ./source/l/libusb/libusb.fix.debug.log.level.diff
 gzip ./source/l/sdl/sdl.linux-2.6.31.input_absinfo.diff
 gzip ./source/l/sdl/SDL_mixer.usrlocal.diff
 gzip ./source/l/expat/expat-2.0.1-fixes-3.patch
-gzip ./source/l/gst-plugins-good/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff
+gzip ./source/l/libmsn/libmsn.gcc47.diff
 gzip ./source/l/parted/parted.configure.diff
-gzip ./source/l/libtiff/libtiff-CVE-2011-0192.patch
-gzip ./source/l/libtiff/libtiff-CVE-2011-1167.patch
+gzip ./source/l/gnome-keyring/schema-Update-description-for-gpg-cache-method.patch
+gzip ./source/l/gnome-keyring/doinst.sh
+gzip ./source/l/gnome-keyring/secret-store-Mark-a-secret-item-as-used-when-acces.patch
+gzip ./source/l/gnome-keyring/gpg-agent-Hook-up-the-TTL-cache-option.patch
+gzip ./source/l/libproxy/only_link_mozjs185.diff
+gzip ./source/l/libproxy/gcc47-include-unistd.h.diff
+gzip ./source/l/libtiff/libtiff-CVE-2012-1173.patch
+gzip ./source/l/glibc/glibc-2.15-revert-c5a0802a.diff
 gzip ./source/l/glibc/glibc.disable.broken.optimized.memcpy.diff
 gzip ./source/l/glibc/glibc-2.10-dns-no-gethostbyname4.diff
+gzip ./source/l/glibc/glibc-2.14.1-fixes-1.patch
 gzip ./source/l/glibc/glibc.make-3.82.diff
 gzip ./source/l/glibc/glibc.git-96611391ad8823ba58405325d78cefeae5cdf699-CVE-2010-3847b.patch
 gzip ./source/l/glibc/glibc.ldd.trace.through.dynamic.linker.diff
 gzip ./source/l/glibc/glibc.ru_RU.CP1251.diff
 gzip ./source/l/glibc/glibc.nis-netgroups.diff
+gzip ./source/l/glibc/glibc.strtod.CVE-2012-3480.diff
+gzip ./source/l/glibc/glibc-2.14-reinstall-nis-rpc-headers.patch
+gzip ./source/l/glibc/glibc-2.14-reexport-rpc-interface.patch
+gzip ./source/l/glibc/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff
 gzip ./source/l/glibc/glibc.git-4a531bb0b3b582cb693de9f76d2d97d970f9a5d5.patch
 gzip ./source/l/glibc/glibc.getcwd.max.macro.diff
 gzip ./source/l/glibc/is_IS.diff
 gzip ./source/l/glibc/glibc.locale.no-archive.diff
+gzip ./source/l/glibc/glibc-2.15.nscd-race-fix.diff
 gzip ./source/l/glibc/glibc.revert.to.fix.build.breakages.diff
 gzip ./source/l/libvisual-plugins/libvisual-plugins.gstreamer.diff
-gzip ./source/l/qt/qt.blacklist.bad.certs.patch02.diff
-gzip ./source/l/qt/qt.x86.cflags.diff
+gzip ./source/l/qt/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch
+gzip ./source/l/qt/QElfParser-fix-type-of-sh_size.patch
+gzip ./source/l/qt/qt.webkit.glib.diff
+gzip ./source/l/qt/qt.assistant.memcpy-crash.diff
 gzip ./source/l/qt/qt.mysql.h.diff
+gzip ./source/l/qt/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch
+gzip ./source/l/qt/qt.ld-gold.patch
 gzip ./source/l/qt/doinst.sh
-gzip ./source/l/qt/qt.QSortFilterProxyModel.reformatted.diff
-gzip ./source/l/qt/qt.blacklist.bad.certs.diff
+gzip ./source/l/qt/qt.webkit-no_Werror.patch
+gzip ./source/l/qt/qt.ca89c49.cursor.position.diff
 gzip ./source/l/gamin/gaminrc
+gzip ./source/l/gamin/no_g_const_return.patch
+gzip ./source/l/gamin/fix-double-lock-in-inotify-helper-c.patch
 gzip ./source/l/gamin/doinst.sh
+gzip ./source/l/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff
 gzip ./source/l/system-config-printer/doinst.sh
 gzip ./source/l/netpbm/config.mk
+gzip ./source/l/libnl3/doinst.sh
 gzip ./source/l/PyQt/PyQt.phonon.diff
 gzip ./source/l/libwmf/libwmf.png14.diff
+gzip ./source/l/gvfs/doinst.sh
 gzip ./source/l/esound/doinst.sh
-gzip ./source/l/t1lib/t1lib_5.1.2-3.diff
+gzip ./source/l/t1lib/t1lib_5.1.2-3.5.diff
+gzip ./source/l/polkit/doinst.sh
 gzip ./source/l/gdk-pixbuf2/gdk-pixbuf.pnglz.diff
 gzip ./source/l/gdk-pixbuf2/doinst.sh
 gzip ./source/l/qtscriptgenerator/include-everything.patch
-gzip ./source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff
 gzip ./source/l/libtermcap/termcap.h.diff
 gzip ./source/l/libtermcap/termcap-compat_1.2.3.diff
 gzip ./source/l/libtermcap/termcap.bufsize.diff
 gzip ./source/l/openexr/openexr.gcc4.diff
-gzip ./source/l/libxml2/libxml2-2.7.8.broken.versioning.diff
+gzip ./source/l/glib-networking/doinst.sh
 gzip ./source/l/lesstif/lesstif.x86_64.patch
 gzip ./source/l/lesstif/lesstif.rendertable.check.diff
 gzip ./source/l/lesstif/lesstif.Makefile.in.patch
 gzip ./source/l/lesstif/doinst.sh
 gzip ./source/l/lesstif/lesstif.PutPixel32.patch
+gzip ./source/l/gtk+3/use_host_triplet_for_gtk_immodules.diff
+gzip ./source/l/gtk+3/doinst.sh
 gzip ./source/l/imlib/imlib.mitshm.render.diff
 gzip ./source/l/gtk+2/gtk+-2.24.x.icon-compat.diff
 gzip ./source/l/gtk+2/fix_build_issues_on_tutorial_and_faq.diff
@@ -925,35 +1392,38 @@ gzip ./source/l/gtk+2/gtk+-2.24.x.icon-compat.am.diff
 gzip ./source/l/gtk+2/use_host_triplet_for_gtk_immodules.diff
 gzip ./source/l/gtk+2/doinst.sh
 gzip ./source/l/gtk+2/gtk.xid.nowarningflood.diff
+gzip ./source/l/vte/vte.escape.cpu.usage.diff
+gzip ./source/l/vte/fix_meta_alt_keybinding.patch
 gzip ./source/l/pilot-link/pilot-link.png14.diff
-gzip ./source/l/pygobject/pygobject.fix.no.introspection.crash.diff
+gzip ./source/l/pygobject/pygobject.flags.diff
 gzip ./source/l/libgpod/doinst.sh
 gzip ./source/l/libnl/libnl-include_limits.h.patch
-gzip ./source/l/hal-info/patches/quirk-LG_X110-keyboard.patch
-gzip ./source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch
 gzip ./source/l/pango/pango.etc.host.location.diff
 gzip ./source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff
 gzip ./source/l/desktop-file-utils/doinst.sh
-gzip ./source/l/apr/apr.apr_ring.h.gcc45.diff
 gzip ./source/l/db44/patch.4.4.20.2
 gzip ./source/l/db44/patch.4.4.20.1
 gzip ./source/l/libcap/libcap.capability.h.fix.broken.includes.diff
 gzip ./source/l/ilmbase/ilmbase.gcc4.diff
-gzip ./source/l/zlib/zlib.largefile64_source.diff
+gzip ./source/l/gcr/doinst.sh
+gzip ./source/l/poppler/poppler_xyscale.patch
+gzip ./source/l/ConsoleKit/ck-history-don-t-truncate-frequent-output-to-8-chars.patch
 gzip ./source/l/ConsoleKit/consolekit-0.4.2-revert.patch
 gzip ./source/l/ConsoleKit/consolekit-0.2.10-cleanup_console_tags.patch
 gzip ./source/l/ConsoleKit/doinst.sh
 gzip ./source/l/freetype/freetype.illadvisederror.diff
 gzip ./source/l/freetype/freetype.subpixel.rendering.diff
-gzip ./source/l/qca-ossl/qca-ossl.nowhirlpool.diff
+gzip ./source/l/fribidi/fribidi.glib.h.diff
+gzip ./source/l/qca-ossl/qca-ossl-openssl-1.0.0.patch
+gzip ./source/l/libgphoto2/fix-usb_id-callout-for-udev-175.diff
 gzip ./source/l/akonadi/doinst.sh
+gzip ./source/l/GConf/doinst.sh
 gzip ./source/l/icon-naming-utils/icon-naming-utils.pkgconfigdir.diff
 gzip ./source/l/fuse/doinst.sh
+gzip ./source/l/gsettings-desktop-schemas/doinst.sh
 gzip ./source/l/gnome-icon-theme/doinst.sh
-gzip ./source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff
 gzip ./source/l/virtuoso-ose/doinst.sh
 gzip ./source/l/libexif/libexif.pc.diff
-gzip ./pasture/source/gxine/gxine.desktop
 bzip2 ./source/n/curl/cacert.pem
 bzip2 ./source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff
 bzip2 ./source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt
diff --git a/slackware64/a/maketag b/slackware64/a/maketag
index e3316e4e..87980116 100644
--- a/slackware64/a/maketag
+++ b/slackware64/a/maketag
@@ -42,13 +42,13 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "findutils" "GNU file finding utilities" "on" \
 "floppy" "Utilities for using DOS floppies" "on" \
 "gawk" "GNU awk pattern scanning language" "on" \
-"gdisk" "GPT fdisk (gdisk)" "on" \
 "genpower" "UPS monitoring daemon" "on" \
 "gettext" "Programs used to internationalize scripts" "on" \
 "getty-ps" "Getty_ps serial login support - OPTIONAL" "on" \
 "glibc-solibs" "Runtime glibc support libraries" "on" \
 "glibc-zoneinfo" "Configures your time zone" "on" \
 "gpm" "Cut and paste text with your mouse" "on" \
+"gptfdisk" "GPT fdisk utilities" "on" \
 "grep" "GNU grep searching tool - REQUIRED" "on" \
 "gzip" "GNU zip compression utility - REQUIRED" "on" \
 "hdparm" "Get/Set IDE hard drive parameters" "on" \
@@ -56,10 +56,11 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "inotify-tools" "Command-line tools for using inotify." "on" \
 "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \
 "kbd" "Change keyboard and console mappings" "on" \
-"kernel-firmware" "Linux 2.6.37.6 kernel firmware -- REQUIRED" "on" \
-"kernel-generic" "Generic 2.6.37.6 kernel (needs an initrd)" "on" \
-"kernel-huge" "Loaded 2.6.37.6 Linux kernel" "on" \
-"kernel-modules" "Linux 2.6.37.6 kernel modules -- REQUIRED" "on" \
+"kernel-firmware" "Linux 3.2.29 kernel firmware -- REQUIRED" "on" \
+"kernel-generic" "Generic 3.2.29 kernel (needs an initrd)" "on" \
+"kernel-huge" "Loaded 3.2.29 Linux kernel" "on" \
+"kernel-modules" "Linux 3.2.29 kernel modules -- REQUIRED" "on" \
+"kmod" "Kernel module utilities -- REQUIRED" "on" \
 "less" "A text pager utility - REQUIRED" "on" \
 "lha" "LHA archive utility" "on" \
 "libcgroup" "Tools for using kernel control groups" "on" \
@@ -71,7 +72,6 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "mdadm" "Utilities for managing MD (RAID) devices" "on" \
 "minicom" "Serial transfer and modem comm package" "on" \
 "mkinitrd" "Tool for building an initial ramdisk" "on" \
-"module-init-tools" "Kernel module utilities -- REQUIRED" "on" \
 "mt-st" "mt ported from BSD - controls tape drive" "on" \
 "mtx" "Controls tape autochangers" "on" \
 "ncompress" "The historic compress utility" "on" \
@@ -103,7 +103,10 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "time" "Times how long a process takes to run" "on" \
 "tree" "Display a directory in tree form" "on" \
 "udev" "System for managing /dev in 2.6 - RECOMMENDED" "on" \
+"udisks" "storage device daemon" "on" \
+"udisks2" "storage device daemon v2" "on" \
 "unarj" "Extract ARJ archives" "on" \
+"upower" "power management abstraction daemon" "on" \
 "usb_modeswitch" "Switching tool for multiple mode USB devices" "on" \
 "usbutils" "Linux USB utilities" "on" \
 "utempter" "Library used for writing to utmp/wtmp" "on" \
@@ -117,7 +120,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk gdisk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
+aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm gptfdisk grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules kmod less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev udisks udisks2 unarj upower usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -125,7 +128,7 @@ aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk gdisk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
+aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm gptfdisk grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules kmod less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev udisks udisks2 unarj upower usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/a/maketag.ez b/slackware64/a/maketag.ez
index e3316e4e..87980116 100644
--- a/slackware64/a/maketag.ez
+++ b/slackware64/a/maketag.ez
@@ -42,13 +42,13 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "findutils" "GNU file finding utilities" "on" \
 "floppy" "Utilities for using DOS floppies" "on" \
 "gawk" "GNU awk pattern scanning language" "on" \
-"gdisk" "GPT fdisk (gdisk)" "on" \
 "genpower" "UPS monitoring daemon" "on" \
 "gettext" "Programs used to internationalize scripts" "on" \
 "getty-ps" "Getty_ps serial login support - OPTIONAL" "on" \
 "glibc-solibs" "Runtime glibc support libraries" "on" \
 "glibc-zoneinfo" "Configures your time zone" "on" \
 "gpm" "Cut and paste text with your mouse" "on" \
+"gptfdisk" "GPT fdisk utilities" "on" \
 "grep" "GNU grep searching tool - REQUIRED" "on" \
 "gzip" "GNU zip compression utility - REQUIRED" "on" \
 "hdparm" "Get/Set IDE hard drive parameters" "on" \
@@ -56,10 +56,11 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "inotify-tools" "Command-line tools for using inotify." "on" \
 "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \
 "kbd" "Change keyboard and console mappings" "on" \
-"kernel-firmware" "Linux 2.6.37.6 kernel firmware -- REQUIRED" "on" \
-"kernel-generic" "Generic 2.6.37.6 kernel (needs an initrd)" "on" \
-"kernel-huge" "Loaded 2.6.37.6 Linux kernel" "on" \
-"kernel-modules" "Linux 2.6.37.6 kernel modules -- REQUIRED" "on" \
+"kernel-firmware" "Linux 3.2.29 kernel firmware -- REQUIRED" "on" \
+"kernel-generic" "Generic 3.2.29 kernel (needs an initrd)" "on" \
+"kernel-huge" "Loaded 3.2.29 Linux kernel" "on" \
+"kernel-modules" "Linux 3.2.29 kernel modules -- REQUIRED" "on" \
+"kmod" "Kernel module utilities -- REQUIRED" "on" \
 "less" "A text pager utility - REQUIRED" "on" \
 "lha" "LHA archive utility" "on" \
 "libcgroup" "Tools for using kernel control groups" "on" \
@@ -71,7 +72,6 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "mdadm" "Utilities for managing MD (RAID) devices" "on" \
 "minicom" "Serial transfer and modem comm package" "on" \
 "mkinitrd" "Tool for building an initial ramdisk" "on" \
-"module-init-tools" "Kernel module utilities -- REQUIRED" "on" \
 "mt-st" "mt ported from BSD - controls tape drive" "on" \
 "mtx" "Controls tape autochangers" "on" \
 "ncompress" "The historic compress utility" "on" \
@@ -103,7 +103,10 @@ system. :^)  Press ENTER when you are done."  21 76 10 \
 "time" "Times how long a process takes to run" "on" \
 "tree" "Display a directory in tree form" "on" \
 "udev" "System for managing /dev in 2.6 - RECOMMENDED" "on" \
+"udisks" "storage device daemon" "on" \
+"udisks2" "storage device daemon v2" "on" \
 "unarj" "Extract ARJ archives" "on" \
+"upower" "power management abstraction daemon" "on" \
 "usb_modeswitch" "Switching tool for multiple mode USB devices" "on" \
 "usbutils" "Linux USB utilities" "on" \
 "utempter" "Library used for writing to utmp/wtmp" "on" \
@@ -117,7 +120,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk gdisk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
+aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm gptfdisk grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules kmod less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev udisks udisks2 unarj upower usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -125,7 +128,7 @@ aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk gdisk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
+aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin btrfs-progs bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm gptfdisk grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules kmod less lha libcgroup lilo logrotate lrzip lvm2 mcelog mdadm minicom mkinitrd mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev udisks udisks2 unarj upower usb_modeswitch usbutils utempter util-linux which xfsprogs xz zoo \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/a/tagfile b/slackware64/a/tagfile
index b141c13c..666ba7c5 100644
--- a/slackware64/a/tagfile
+++ b/slackware64/a/tagfile
@@ -29,13 +29,13 @@ file:REC
 findutils:ADD
 floppy:ADD
 gawk:ADD
-gdisk:ADD
 genpower:OPT
 gettext:REC
 getty-ps:OPT
 glibc-solibs:ADD
 glibc-zoneinfo:ADD
 gpm:REC
+gptfdisk:ADD
 grep:ADD
 gzip:ADD
 hdparm:ADD
@@ -47,6 +47,7 @@ kernel-firmware:ADD
 kernel-generic:REC
 kernel-huge:ADD
 kernel-modules:ADD
+kmod:ADD
 less:ADD
 lha:REC
 libcgroup:REC
@@ -58,7 +59,6 @@ mcelog:REC
 mdadm:OPT
 minicom:REC
 mkinitrd:REC
-module-init-tools:ADD
 mt-st:OPT
 mtx:REC
 ncompress:REC
@@ -90,7 +90,10 @@ tcsh:REC
 time:REC
 tree:REC
 udev:ADD
+udisks:REC
+udisks2:REC
 unarj:REC
+upower:REC
 usb_modeswitch:ADD
 usbutils:ADD
 utempter:REC
diff --git a/slackware64/ap/maketag b/slackware64/ap/maketag
index e8698bae..c49ab3c1 100644
--- a/slackware64/ap/maketag
+++ b/slackware64/ap/maketag
@@ -39,6 +39,7 @@ done." 22 72 12 \
 "groff" "GNU groff document formatting system" "on" \
 "gutenprint" "Additional printer drivers for gs and CUPS" "on" \
 "hplip" "HP printing and scanning software" "on" \
+"htop" "An ncurses-based process viewer" "on" \
 "ispell" "The International version of ispell" "on" \
 "jed" "JED programmer's editor" "on" \
 "joe" "joe text editor" "on" \
@@ -60,7 +61,6 @@ done." 22 72 12 \
 "mysql" "MySQL database server" "on" \
 "nano" "A simple editor with the look and feel of Pico" "on" \
 "normalize" "Normalize audio file volume" "on" \
-"ntfsprogs" "Utilities for the NTFS filesystem" "on" \
 "pm-utils" "Power management utilities" "on" \
 "powertop" "PowerTOP system energy usage utility" "on" \
 "radeontool" "Utility for laptops with a Radeon chipset" "on" \
@@ -71,6 +71,7 @@ done." 22 72 12 \
 "screen" "ANSI/vt100 virtual terminal emulator" "on" \
 "seejpeg" "An SVGAlib image viewer" "on" \
 "slackpkg" "Slackware package updating tool" "on" \
+"soma" "A dialog-based Internet radio player" "on" \
 "sox" "Sound utilities" "on" \
 "sqlite" "A small SQL database server and library" "on" \
 "sudo" "Allow special users limited root access" "on" \
@@ -87,7 +88,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
+a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip htop ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg soma sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -95,7 +96,7 @@ a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd dd
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
+a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip htop ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg soma sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/ap/maketag.ez b/slackware64/ap/maketag.ez
index e8698bae..c49ab3c1 100644
--- a/slackware64/ap/maketag.ez
+++ b/slackware64/ap/maketag.ez
@@ -39,6 +39,7 @@ done." 22 72 12 \
 "groff" "GNU groff document formatting system" "on" \
 "gutenprint" "Additional printer drivers for gs and CUPS" "on" \
 "hplip" "HP printing and scanning software" "on" \
+"htop" "An ncurses-based process viewer" "on" \
 "ispell" "The International version of ispell" "on" \
 "jed" "JED programmer's editor" "on" \
 "joe" "joe text editor" "on" \
@@ -60,7 +61,6 @@ done." 22 72 12 \
 "mysql" "MySQL database server" "on" \
 "nano" "A simple editor with the look and feel of Pico" "on" \
 "normalize" "Normalize audio file volume" "on" \
-"ntfsprogs" "Utilities for the NTFS filesystem" "on" \
 "pm-utils" "Power management utilities" "on" \
 "powertop" "PowerTOP system energy usage utility" "on" \
 "radeontool" "Utility for laptops with a Radeon chipset" "on" \
@@ -71,6 +71,7 @@ done." 22 72 12 \
 "screen" "ANSI/vt100 virtual terminal emulator" "on" \
 "seejpeg" "An SVGAlib image viewer" "on" \
 "slackpkg" "Slackware package updating tool" "on" \
+"soma" "A dialog-based Internet radio player" "on" \
 "sox" "Sound utilities" "on" \
 "sqlite" "A small SQL database server and library" "on" \
 "sudo" "Allow special users limited root access" "on" \
@@ -87,7 +88,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
+a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip htop ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg soma sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -95,7 +96,7 @@ a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd dd
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
+a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd ddrescue diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip htop ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi lxc madplay man man-pages mc moc most mpg123 mysql nano normalize pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg soma sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/ap/tagfile b/slackware64/ap/tagfile
index 59bcfc28..21b386f5 100644
--- a/slackware64/ap/tagfile
+++ b/slackware64/ap/tagfile
@@ -26,6 +26,7 @@ gphoto2:REC
 groff:ADD
 gutenprint:OPT
 hplip:REC
+htop:REC
 ispell:OPT
 jed:OPT
 joe:OPT
@@ -47,7 +48,6 @@ mpg123:OPT
 mysql:OPT
 nano:REC
 normalize:OPT
-ntfsprogs:OPT
 pm-utils:OPT
 powertop:OPT
 radeontool:REC
@@ -58,6 +58,7 @@ sc:OPT
 screen:OPT
 seejpeg:REC
 slackpkg:REC
+soma:REC
 sox:REC
 sqlite:OPT
 sudo:OPT
diff --git a/slackware64/d/maketag b/slackware64/d/maketag
index bff74924..3d476988 100644
--- a/slackware64/d/maketag
+++ b/slackware64/d/maketag
@@ -24,12 +24,13 @@ done." 22 72 12 \
 "distcc" "gcc frontend to use networked machines" "on" \
 "doxygen" "Source code documentation generator" "on" \
 "flex" "Fast lexical analyzer generator" "on" \
-"gcc" "GNU gcc-4.3.3 C compiler" "on" \
-"gcc-g++" "GNU C++ compiler for gcc-4.3.3" "on" \
-"gcc-gfortran" "GNU Fortran-95 compiler for gcc-4.3.3" "on" \
-"gcc-gnat" "GNU Ada 95 compiler for gcc-4.3.3" "on" \
-"gcc-java" "GNU Java compiler for gcc-4.3.3" "on" \
-"gcc-objc" "GNU Objective-C compiler for gcc-4.3.3" "on" \
+"gcc" "GNU gcc-4.7.1 C compiler" "on" \
+"gcc-g++" "GNU C++ compiler for gcc" "on" \
+"gcc-gfortran" "GNU Fortran 95/2003/2008 compiler for gcc" "on" \
+"gcc-gnat" "GNU Ada83/95/2005/2012 compiler for gcc" "on" \
+"gcc-go" "GNU Go compiler for gcc" "on" \
+"gcc-java" "GNU Java compiler for gcc" "on" \
+"gcc-objc" "GNU Objective-C compiler for gcc" "on" \
 "gdb" "The GNU debugger" "on" \
 "gettext-tools" "GNU internationalization devel package" "on" \
 "git" "A directory content manager" "on" \
@@ -39,6 +40,7 @@ done." 22 72 12 \
 "intltool" "Internationalization utilities" "on" \
 "kernel-headers" "Linux kernel include files" "on" \
 "libtool" "GNU libtool library support script" "on" \
+"llvm" "LLVM compiler toolkit" "on" \
 "m4" "GNU m4 macro processor" "on" \
 "make" "GNU make" "on" \
 "mercurial" "Distributed source management system" "on" \
@@ -61,7 +63,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
+autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-go gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool llvm m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -69,7 +71,7 @@ autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxy
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
+autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-go gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool llvm m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/d/maketag.ez b/slackware64/d/maketag.ez
index bff74924..3d476988 100644
--- a/slackware64/d/maketag.ez
+++ b/slackware64/d/maketag.ez
@@ -24,12 +24,13 @@ done." 22 72 12 \
 "distcc" "gcc frontend to use networked machines" "on" \
 "doxygen" "Source code documentation generator" "on" \
 "flex" "Fast lexical analyzer generator" "on" \
-"gcc" "GNU gcc-4.3.3 C compiler" "on" \
-"gcc-g++" "GNU C++ compiler for gcc-4.3.3" "on" \
-"gcc-gfortran" "GNU Fortran-95 compiler for gcc-4.3.3" "on" \
-"gcc-gnat" "GNU Ada 95 compiler for gcc-4.3.3" "on" \
-"gcc-java" "GNU Java compiler for gcc-4.3.3" "on" \
-"gcc-objc" "GNU Objective-C compiler for gcc-4.3.3" "on" \
+"gcc" "GNU gcc-4.7.1 C compiler" "on" \
+"gcc-g++" "GNU C++ compiler for gcc" "on" \
+"gcc-gfortran" "GNU Fortran 95/2003/2008 compiler for gcc" "on" \
+"gcc-gnat" "GNU Ada83/95/2005/2012 compiler for gcc" "on" \
+"gcc-go" "GNU Go compiler for gcc" "on" \
+"gcc-java" "GNU Java compiler for gcc" "on" \
+"gcc-objc" "GNU Objective-C compiler for gcc" "on" \
 "gdb" "The GNU debugger" "on" \
 "gettext-tools" "GNU internationalization devel package" "on" \
 "git" "A directory content manager" "on" \
@@ -39,6 +40,7 @@ done." 22 72 12 \
 "intltool" "Internationalization utilities" "on" \
 "kernel-headers" "Linux kernel include files" "on" \
 "libtool" "GNU libtool library support script" "on" \
+"llvm" "LLVM compiler toolkit" "on" \
 "m4" "GNU m4 macro processor" "on" \
 "make" "GNU make" "on" \
 "mercurial" "Distributed source management system" "on" \
@@ -61,7 +63,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
+autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-go gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool llvm m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -69,7 +71,7 @@ autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxy
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
+autoconf automake binutils bison ccache clisp cmake cscope cvs dev86 distcc doxygen flex gcc gcc-g++ gcc-gfortran gcc-gnat gcc-go gcc-java gcc-objc gdb gettext-tools git gperf guile indent intltool kernel-headers libtool llvm m4 make mercurial nasm oprofile p2c perl pkg-config pmake python rcs ruby slacktrack strace subversion swig yasm \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/d/tagfile b/slackware64/d/tagfile
index e0c4c302..17e6daa6 100644
--- a/slackware64/d/tagfile
+++ b/slackware64/d/tagfile
@@ -15,6 +15,7 @@ gcc:ADD
 gcc-g++:REC
 gcc-gfortran:OPT
 gcc-gnat:OPT
+gcc-go:OPT
 gcc-java:OPT
 gcc-objc:OPT
 gdb:REC
@@ -26,6 +27,7 @@ indent:OPT
 intltool:REC
 kernel-headers:ADD
 libtool:OPT
+llvm:REC
 m4:REC
 make:ADD
 mercurial:REC
diff --git a/slackware64/e/maketag b/slackware64/e/maketag
index 2a2f7439..012d0cea 100644
--- a/slackware64/e/maketag
+++ b/slackware64/e/maketag
@@ -11,7 +11,7 @@ from series E.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are \
 done." 16 72 6 \
-"emacs" "The GNU Emacs 23.3 system" "on" \
+"emacs" "The GNU Emacs 24.2 system" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
diff --git a/slackware64/e/maketag.ez b/slackware64/e/maketag.ez
index 2a2f7439..012d0cea 100644
--- a/slackware64/e/maketag.ez
+++ b/slackware64/e/maketag.ez
@@ -11,7 +11,7 @@ from series E.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are \
 done." 16 72 6 \
-"emacs" "The GNU Emacs 23.3 system" "on" \
+"emacs" "The GNU Emacs 24.2 system" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
diff --git a/slackware64/k/maketag b/slackware64/k/maketag
index 9f101c59..83e423eb 100644
--- a/slackware64/k/maketag
+++ b/slackware64/k/maketag
@@ -21,7 +21,7 @@ from series K.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are \
 done." 11 70 1 \
-"kernel-source" "Linux 2.6.37.6 kernel source" "on" \
+"kernel-source" "Linux 3.2.29 kernel source" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
diff --git a/slackware64/k/maketag.ez b/slackware64/k/maketag.ez
index 9f101c59..83e423eb 100644
--- a/slackware64/k/maketag.ez
+++ b/slackware64/k/maketag.ez
@@ -21,7 +21,7 @@ from series K.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are \
 done." 11 70 1 \
-"kernel-source" "Linux 2.6.37.6 kernel source" "on" \
+"kernel-source" "Linux 3.2.29 kernel source" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
diff --git a/slackware64/kde/maketag b/slackware64/kde/maketag
index 1b82effe..cb767ce7 100644
--- a/slackware64/kde/maketag
+++ b/slackware64/kde/maketag
@@ -15,18 +15,37 @@ the list, and the SPACE key to deselect any items you don't want \
 to install.  Press ENTER when you are done." \
 22 72 9 \
 "amarok" "A media player for KDE" "on" \
+"analitza" "mathematical feature library" "on" \
+"ark" "KDE archiver tool" "on" \
+"blinken" "a memory enhancement game" "on" \
+"bluedevil" "bluetooth stack for KDE" "on" \
+"calligra" "KDE office productivity suite" "on" \
+"cantor" "front-end to mathematics software" "on" \
+"filelight" "file system monitor" "on" \
+"gwenview" "image viewer" "on" \
 "k3b" "CD/DVD burning app for KDE" "on" \
+"kaccessible" "KDE accessibility bridge" "on" \
+"kactivities" "API for KDE Activities" "on" \
+"kalgebra" "MathML-based graph calculator" "on" \
+"kalzium" "periodic table of the elements" "on" \
+"kamera" "Digital camera support" "on" \
+"kanagram" "letter game" "on" \
+"kate" "advanced text editor" "on" \
 "kaudiocreator" "CD ripper and audio encoder" "on" \
-"kdeaccessibility" "KDE accessibility utilities" "on" \
+"kbruch" "calculate fractions" "on" \
+"kcalc" "KDE calculator" "on" \
+"kcharselect" "character picker" "on" \
+"kcolorchooser" "color chooser application" "on" \
+"kde-baseapps" "KDE core applications and files" "on" \
+"kde-runtime" "KDE runtime core" "on" \
+"kde-wallpapers" "Wallpapers for KDE" "on" \
+"kde-workspace" "KDE Plasma Desktop" "on" \
 "kdeadmin" "KDE system administration utilities" "on" \
 "kdeartwork" "Extra themes, sounds, wallpapers, and styles" "on" \
-"kdebase" "The K Desktop Environment base package" "on" \
-"kdebase-runtime" "The KDE base runtime support package" "on" \
-"kdebase-workspace" "The KDE base workspace package" "on" \
-"kdebindings" "Optional KDE library bindings" "on" \
-"kdeedu" "KDE Edutainment programs" "on" \
 "kdegames" "A KDE games collection" "on" \
-"kdegraphics" "Graphic programs for KDE" "on" \
+"kdegraphics-mobipocket" "Mobipocket support for Okular" "on" \
+"kdegraphics-strigi-analyzer" "graphics plugins for strigi" "on" \
+"kdegraphics-thumbnailers" "image thumbnailers" "on" \
 "kdelibs" "Libraries required for KDE" "on" \
 "kdemultimedia" "Multimedia programs for KDE" "on" \
 "kdenetwork" "Networking programs for KDE" "on" \
@@ -36,25 +55,76 @@ to install.  Press ENTER when you are done." \
 "kdeplasma-addons" "Plasma addons for KDE" "on" \
 "kdesdk" "KDE software development kit" "on" \
 "kdetoys" "Toys for the KDE desktop" "on" \
-"kdeutils" "Utilities for KDE" "on" \
 "kdevelop" "KDE Application Development Environment" "on" \
+"kdevelop-pg-qt" "KDevelop Parser Generator" "on" \
 "kdevplatform" "Libraries used by kdevelop" "on" \
 "kdewebdev" "Quanta Plus web development environment" "on" \
-"koffice" "The KDE office productivity suite" "on" \
-"konq-plugins" "Plugins to extend Konqueror" "on" \
-"kopete-cryptography" "Crypto support for Kopete Messenger" "on" \
+"kdf" "show available disk space" "on" \
+"kfloppy" "floppy disk formatter" "on" \
+"kgamma" "display gamma configuration" "on" \
+"kgeography" "geography learning tool" "on" \
+"kgpg" "GUI for GnuPG" "on" \
+"khangman" "classical hangman game" "on" \
+"kig" "interactive geometry game" "on" \
+"kiten" "a tool to learn Japanese" "on" \
+"klettres" "language learning program" "on" \
+"kmag" "Screen magnifier" "on" \
+"kmousetool" "Automatic mouse clicks" "on" \
+"kmouth" "Speech synthesis frontend" "on" \
+"kmplot" "mathematical function plotter" "on" \
+"kolourpaint" "easy to use paint program" "on" \
+"konsole" "KDE terminal emulator" "on" \
+"korundum" "KDE ruby bindings" "on" \
+"kplayer" "KDE media player" "on" \
+"kremotecontrol" "remote control frontend" "on" \
+"kruler" "screen ruler for KDE" "on" \
+"ksaneplugin" "scanning plugin using libksane" "on" \
+"ksecrets" "secrets management infrastructure" "on" \
+"ksnapshot" "screen capture program" "on" \
+"kstars" "a desktop planetarium" "on" \
+"ktimer" "program scheduler" "on" \
 "ktorrent" "BitTorrent program for KDE" "on" \
+"ktouch" "touch typing tutor" "on" \
+"kturtle" "Logo programming environment" "on" \
+"kwallet" "KDE wallet manager" "on" \
+"kwebkitpart" "WebKit browser component" "on" \
+"kwordquiz" "flash card program" "on" \
+"libkdcraw" "RAW photo wrapper library" "on" \
+"libkdeedu" "library for educational apps" "on" \
+"libkexiv2" "photo metadata library" "on" \
+"libkipi" "image plugin library" "on" \
+"libksane" "scanner support library" "on" \
 "libktorrent" "KDE BitTorrent library" "on" \
+"marble" "virtual globe" "on" \
+"networkmanagement" "KDE network control widget" "on" \
+"okular" "a document viewer" "on" \
+"oxygen-gtk2" "Oxygen theme for GTK+" "on" \
 "oxygen-icons" "Oxygen icon theme" "on" \
-"polkit-kde-1" "KDE polkit authenticator" "on" \
-"polkit-qt-1" "Qt wrapper for the polkit API" "on" \
+"parley" "vocabulary trainer" "on" \
+"perlkde" "perl bindings for KDE" "on" \
+"perlqt" "Perl OO interface to Qt" "on" \
+"polkit-kde-agent-1" "KDE polkit authenticator" "on" \
+"polkit-kde-kcmodules-1" "KDE polkit kcmodules" "on" \
+"printer-applet" "printer applet" "on" \
+"pykde4" "Python bindings for KDE4" "on" \
+"qtruby" "Qt bindings for ruby" "on" \
+"quanta" "Quanta Plus web development" "on" \
+"rocs" "graph theory IDE" "on" \
 "skanlite" "KDE scanning program" "on" \
+"smokegen" "SMOKE binding generator" "on" \
+"smokekde" "smoke-kde library" "on" \
+"smokeqt" "bindings for Qt libraries" "on" \
+"step" "interactive physics simulator" "on" \
+"superkaramba" "interactive widget manager" "on" \
+"svgpart" "SVG plugin for KDE" "on" \
+"sweeper" "remove traces of your activities" "on" \
+"wicd-kde" "KDE wicd client" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent libktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \
+amarok analitza ark blinken bluedevil calligra cantor filelight gwenview k3b kaccessible kactivities kalgebra kalzium kamera kanagram kate kaudiocreator kbruch kcalc kcharselect kcolorchooser kde-baseapps kde-runtime kde-wallpapers kde-workspace kdeadmin kdeartwork kdegames kdegraphics-mobipocket kdegraphics-strigi-analyzer kdegraphics-thumbnailers kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdevelop kdevelop-pg-qt kdevplatform kdewebdev kdf kfloppy kgamma kgeography kgpg khangman kig kiten klettres kmag kmousetool kmouth kmplot kolourpaint konsole korundum kplayer kremotecontrol kruler ksaneplugin ksecrets ksnapshot kstars ktimer ktorrent ktouch kturtle kwallet kwebkitpart kwordquiz libkdcraw libkdeedu libkexiv2 libkipi libksane libktorrent marble networkmanagement okular oxygen-gtk2 oxygen-icons parley perlkde perlqt polkit-kde-agent-1 polkit-kde-kcmodules-1 printer-applet pykde4 qtruby quanta rocs skanlite smokegen smokekde smokeqt step superkaramba svgpart sweeper wicd-kde \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -62,7 +132,7 @@ amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-ru
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent libktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \
+amarok analitza ark blinken bluedevil calligra cantor filelight gwenview k3b kaccessible kactivities kalgebra kalzium kamera kanagram kate kaudiocreator kbruch kcalc kcharselect kcolorchooser kde-baseapps kde-runtime kde-wallpapers kde-workspace kdeadmin kdeartwork kdegames kdegraphics-mobipocket kdegraphics-strigi-analyzer kdegraphics-thumbnailers kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdevelop kdevelop-pg-qt kdevplatform kdewebdev kdf kfloppy kgamma kgeography kgpg khangman kig kiten klettres kmag kmousetool kmouth kmplot kolourpaint konsole korundum kplayer kremotecontrol kruler ksaneplugin ksecrets ksnapshot kstars ktimer ktorrent ktouch kturtle kwallet kwebkitpart kwordquiz libkdcraw libkdeedu libkexiv2 libkipi libksane libktorrent marble networkmanagement okular oxygen-gtk2 oxygen-icons parley perlkde perlqt polkit-kde-agent-1 polkit-kde-kcmodules-1 printer-applet pykde4 qtruby quanta rocs skanlite smokegen smokekde smokeqt step superkaramba svgpart sweeper wicd-kde \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/kde/maketag.ez b/slackware64/kde/maketag.ez
index 1b82effe..cb767ce7 100644
--- a/slackware64/kde/maketag.ez
+++ b/slackware64/kde/maketag.ez
@@ -15,18 +15,37 @@ the list, and the SPACE key to deselect any items you don't want \
 to install.  Press ENTER when you are done." \
 22 72 9 \
 "amarok" "A media player for KDE" "on" \
+"analitza" "mathematical feature library" "on" \
+"ark" "KDE archiver tool" "on" \
+"blinken" "a memory enhancement game" "on" \
+"bluedevil" "bluetooth stack for KDE" "on" \
+"calligra" "KDE office productivity suite" "on" \
+"cantor" "front-end to mathematics software" "on" \
+"filelight" "file system monitor" "on" \
+"gwenview" "image viewer" "on" \
 "k3b" "CD/DVD burning app for KDE" "on" \
+"kaccessible" "KDE accessibility bridge" "on" \
+"kactivities" "API for KDE Activities" "on" \
+"kalgebra" "MathML-based graph calculator" "on" \
+"kalzium" "periodic table of the elements" "on" \
+"kamera" "Digital camera support" "on" \
+"kanagram" "letter game" "on" \
+"kate" "advanced text editor" "on" \
 "kaudiocreator" "CD ripper and audio encoder" "on" \
-"kdeaccessibility" "KDE accessibility utilities" "on" \
+"kbruch" "calculate fractions" "on" \
+"kcalc" "KDE calculator" "on" \
+"kcharselect" "character picker" "on" \
+"kcolorchooser" "color chooser application" "on" \
+"kde-baseapps" "KDE core applications and files" "on" \
+"kde-runtime" "KDE runtime core" "on" \
+"kde-wallpapers" "Wallpapers for KDE" "on" \
+"kde-workspace" "KDE Plasma Desktop" "on" \
 "kdeadmin" "KDE system administration utilities" "on" \
 "kdeartwork" "Extra themes, sounds, wallpapers, and styles" "on" \
-"kdebase" "The K Desktop Environment base package" "on" \
-"kdebase-runtime" "The KDE base runtime support package" "on" \
-"kdebase-workspace" "The KDE base workspace package" "on" \
-"kdebindings" "Optional KDE library bindings" "on" \
-"kdeedu" "KDE Edutainment programs" "on" \
 "kdegames" "A KDE games collection" "on" \
-"kdegraphics" "Graphic programs for KDE" "on" \
+"kdegraphics-mobipocket" "Mobipocket support for Okular" "on" \
+"kdegraphics-strigi-analyzer" "graphics plugins for strigi" "on" \
+"kdegraphics-thumbnailers" "image thumbnailers" "on" \
 "kdelibs" "Libraries required for KDE" "on" \
 "kdemultimedia" "Multimedia programs for KDE" "on" \
 "kdenetwork" "Networking programs for KDE" "on" \
@@ -36,25 +55,76 @@ to install.  Press ENTER when you are done." \
 "kdeplasma-addons" "Plasma addons for KDE" "on" \
 "kdesdk" "KDE software development kit" "on" \
 "kdetoys" "Toys for the KDE desktop" "on" \
-"kdeutils" "Utilities for KDE" "on" \
 "kdevelop" "KDE Application Development Environment" "on" \
+"kdevelop-pg-qt" "KDevelop Parser Generator" "on" \
 "kdevplatform" "Libraries used by kdevelop" "on" \
 "kdewebdev" "Quanta Plus web development environment" "on" \
-"koffice" "The KDE office productivity suite" "on" \
-"konq-plugins" "Plugins to extend Konqueror" "on" \
-"kopete-cryptography" "Crypto support for Kopete Messenger" "on" \
+"kdf" "show available disk space" "on" \
+"kfloppy" "floppy disk formatter" "on" \
+"kgamma" "display gamma configuration" "on" \
+"kgeography" "geography learning tool" "on" \
+"kgpg" "GUI for GnuPG" "on" \
+"khangman" "classical hangman game" "on" \
+"kig" "interactive geometry game" "on" \
+"kiten" "a tool to learn Japanese" "on" \
+"klettres" "language learning program" "on" \
+"kmag" "Screen magnifier" "on" \
+"kmousetool" "Automatic mouse clicks" "on" \
+"kmouth" "Speech synthesis frontend" "on" \
+"kmplot" "mathematical function plotter" "on" \
+"kolourpaint" "easy to use paint program" "on" \
+"konsole" "KDE terminal emulator" "on" \
+"korundum" "KDE ruby bindings" "on" \
+"kplayer" "KDE media player" "on" \
+"kremotecontrol" "remote control frontend" "on" \
+"kruler" "screen ruler for KDE" "on" \
+"ksaneplugin" "scanning plugin using libksane" "on" \
+"ksecrets" "secrets management infrastructure" "on" \
+"ksnapshot" "screen capture program" "on" \
+"kstars" "a desktop planetarium" "on" \
+"ktimer" "program scheduler" "on" \
 "ktorrent" "BitTorrent program for KDE" "on" \
+"ktouch" "touch typing tutor" "on" \
+"kturtle" "Logo programming environment" "on" \
+"kwallet" "KDE wallet manager" "on" \
+"kwebkitpart" "WebKit browser component" "on" \
+"kwordquiz" "flash card program" "on" \
+"libkdcraw" "RAW photo wrapper library" "on" \
+"libkdeedu" "library for educational apps" "on" \
+"libkexiv2" "photo metadata library" "on" \
+"libkipi" "image plugin library" "on" \
+"libksane" "scanner support library" "on" \
 "libktorrent" "KDE BitTorrent library" "on" \
+"marble" "virtual globe" "on" \
+"networkmanagement" "KDE network control widget" "on" \
+"okular" "a document viewer" "on" \
+"oxygen-gtk2" "Oxygen theme for GTK+" "on" \
 "oxygen-icons" "Oxygen icon theme" "on" \
-"polkit-kde-1" "KDE polkit authenticator" "on" \
-"polkit-qt-1" "Qt wrapper for the polkit API" "on" \
+"parley" "vocabulary trainer" "on" \
+"perlkde" "perl bindings for KDE" "on" \
+"perlqt" "Perl OO interface to Qt" "on" \
+"polkit-kde-agent-1" "KDE polkit authenticator" "on" \
+"polkit-kde-kcmodules-1" "KDE polkit kcmodules" "on" \
+"printer-applet" "printer applet" "on" \
+"pykde4" "Python bindings for KDE4" "on" \
+"qtruby" "Qt bindings for ruby" "on" \
+"quanta" "Quanta Plus web development" "on" \
+"rocs" "graph theory IDE" "on" \
 "skanlite" "KDE scanning program" "on" \
+"smokegen" "SMOKE binding generator" "on" \
+"smokekde" "smoke-kde library" "on" \
+"smokeqt" "bindings for Qt libraries" "on" \
+"step" "interactive physics simulator" "on" \
+"superkaramba" "interactive widget manager" "on" \
+"svgpart" "SVG plugin for KDE" "on" \
+"sweeper" "remove traces of your activities" "on" \
+"wicd-kde" "KDE wicd client" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent libktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \
+amarok analitza ark blinken bluedevil calligra cantor filelight gwenview k3b kaccessible kactivities kalgebra kalzium kamera kanagram kate kaudiocreator kbruch kcalc kcharselect kcolorchooser kde-baseapps kde-runtime kde-wallpapers kde-workspace kdeadmin kdeartwork kdegames kdegraphics-mobipocket kdegraphics-strigi-analyzer kdegraphics-thumbnailers kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdevelop kdevelop-pg-qt kdevplatform kdewebdev kdf kfloppy kgamma kgeography kgpg khangman kig kiten klettres kmag kmousetool kmouth kmplot kolourpaint konsole korundum kplayer kremotecontrol kruler ksaneplugin ksecrets ksnapshot kstars ktimer ktorrent ktouch kturtle kwallet kwebkitpart kwordquiz libkdcraw libkdeedu libkexiv2 libkipi libksane libktorrent marble networkmanagement okular oxygen-gtk2 oxygen-icons parley perlkde perlqt polkit-kde-agent-1 polkit-kde-kcmodules-1 printer-applet pykde4 qtruby quanta rocs skanlite smokegen smokekde smokeqt step superkaramba svgpart sweeper wicd-kde \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -62,7 +132,7 @@ amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-ru
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-amarok k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent libktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \
+amarok analitza ark blinken bluedevil calligra cantor filelight gwenview k3b kaccessible kactivities kalgebra kalzium kamera kanagram kate kaudiocreator kbruch kcalc kcharselect kcolorchooser kde-baseapps kde-runtime kde-wallpapers kde-workspace kdeadmin kdeartwork kdegames kdegraphics-mobipocket kdegraphics-strigi-analyzer kdegraphics-thumbnailers kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdevelop kdevelop-pg-qt kdevplatform kdewebdev kdf kfloppy kgamma kgeography kgpg khangman kig kiten klettres kmag kmousetool kmouth kmplot kolourpaint konsole korundum kplayer kremotecontrol kruler ksaneplugin ksecrets ksnapshot kstars ktimer ktorrent ktouch kturtle kwallet kwebkitpart kwordquiz libkdcraw libkdeedu libkexiv2 libkipi libksane libktorrent marble networkmanagement okular oxygen-gtk2 oxygen-icons parley perlkde perlqt polkit-kde-agent-1 polkit-kde-kcmodules-1 printer-applet pykde4 qtruby quanta rocs skanlite smokegen smokekde smokeqt step superkaramba svgpart sweeper wicd-kde \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/kde/tagfile b/slackware64/kde/tagfile
index 2c776299..f81ec6b4 100644
--- a/slackware64/kde/tagfile
+++ b/slackware64/kde/tagfile
@@ -1,16 +1,35 @@
 amarok:OPT
+analitza:REC
+ark:REC
+blinken:REC
+bluedevil:REC
+calligra:REC
+cantor:REC
+filelight:REC
+gwenview:REC
 k3b:OPT
+kaccessible:REC
+kactivities:REC
+kalgebra:REC
+kalzium:REC
+kamera:REC
+kanagram:REC
+kate:REC
 kaudiocreator:REC
-kdeaccessibility:OPT
+kbruch:REC
+kcalc:REC
+kcharselect:REC
+kcolorchooser:REC
+kde-baseapps:REC
+kde-runtime:REC
+kde-wallpapers:REC
+kde-workspace:REC
 kdeadmin:ADD
 kdeartwork:ADD
-kdebase:ADD
-kdebase-runtime:ADD
-kdebase-workspace:ADD
-kdebindings:OPT
-kdeedu:REC
 kdegames:REC
-kdegraphics:ADD
+kdegraphics-mobipocket:REC
+kdegraphics-strigi-analyzer:REC
+kdegraphics-thumbnailers:REC
 kdelibs:ADD
 kdemultimedia:REC
 kdenetwork:REC
@@ -20,16 +39,67 @@ kdepimlibs:REC
 kdeplasma-addons:ADD
 kdesdk:OPT
 kdetoys:REC
-kdeutils:ADD
 kdevelop:OPT
+kdevelop-pg-qt:REC
 kdevplatform:OPT
 kdewebdev:OPT
-koffice:REC
-konq-plugins:REC
-kopete-cryptography:REC
+kdf:REC
+kfloppy:REC
+kgamma:REC
+kgeography:REC
+kgpg:REC
+khangman:REC
+kig:REC
+kiten:REC
+klettres:REC
+kmag:REC
+kmousetool:REC
+kmouth:REC
+kmplot:REC
+kolourpaint:REC
+konsole:REC
+korundum:REC
+kplayer:REC
+kremotecontrol:REC
+kruler:REC
+ksaneplugin:REC
+ksecrets:REC
+ksnapshot:REC
+kstars:REC
+ktimer:REC
 ktorrent:REC
+ktouch:REC
+kturtle:REC
+kwallet:REC
+kwebkitpart:REC
+kwordquiz:REC
+libkdcraw:REC
+libkdeedu:REC
+libkexiv2:REC
+libkipi:REC
+libksane:REC
 libktorrent:REC
+marble:REC
+networkmanagement:REC
+okular:REC
+oxygen-gtk2:REC
 oxygen-icons:REC
-polkit-kde-1:ADD
-polkit-qt-1:ADD
+parley:REC
+perlkde:REC
+perlqt:REC
+polkit-kde-agent-1:REC
+polkit-kde-kcmodules-1:REC
+printer-applet:REC
+pykde4:REC
+qtruby:REC
+quanta:REC
+rocs:REC
 skanlite:REC
+smokegen:REC
+smokekde:REC
+smokeqt:REC
+step:REC
+superkaramba:REC
+svgpart:REC
+sweeper:REC
+wicd-kde:REC
diff --git a/slackware64/kdei/maketag b/slackware64/kdei/maketag
index af2bc2d8..eece6bf0 100644
--- a/slackware64/kdei/maketag
+++ b/slackware64/kdei/maketag
@@ -11,41 +11,63 @@ within KDE for languages other than US English, please \
 select them from the list below. \
 Press ENTER \
 when you are done." 21 74 12 \
+"calligra-l10n-ca" "Catalan language support" "off" \
+"calligra-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \
+"calligra-l10n-cs" "Czech language support" "off" \
+"calligra-l10n-da" "Danish language support" "off" \
+"calligra-l10n-de" "German language support" "off" \
+"calligra-l10n-el" "Greek language support" "off" \
+"calligra-l10n-en_GB" "English (UK) language support" "off" \
+"calligra-l10n-es" "Spanish language support" "off" \
+"calligra-l10n-et" "Estonian language support" "off" \
+"calligra-l10n-fi" "Finnish language support" "off" \
+"calligra-l10n-fr" "French language support" "off" \
+"calligra-l10n-hu" "Hungarian language support" "off" \
+"calligra-l10n-it" "Italian language support" "off" \
+"calligra-l10n-kk" "Kazakh language support" "off" \
+"calligra-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
+"calligra-l10n-nds" "Low Saxon language support" "off" \
+"calligra-l10n-nl" "Dutch language support" "off" \
+"calligra-l10n-pl" "Polish language support" "off" \
+"calligra-l10n-pt" "Portuguese language support" "off" \
+"calligra-l10n-pt_BR" "Brazil Portuguese language support" "off" \
+"calligra-l10n-ru" "Russian language support" "off" \
+"calligra-l10n-sk" "Slovak language support" "off" \
+"calligra-l10n-sv" "Swedish language support" "off" \
+"calligra-l10n-uk" "Ukrainian language support" "off" \
+"calligra-l10n-zh_CN" "Simplified Chinese language support" "off" \
+"calligra-l10n-zh_TW" "Chinese language support" "off" \
 "kde-l10n-ar" "Arabic language support" "off" \
 "kde-l10n-bg" "Bulgarian language support" "off" \
+"kde-l10n-bs" "Bosnian language support" "off" \
 "kde-l10n-ca" "Catalan language support" "off" \
-"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "on" \
+"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "off" \
 "kde-l10n-cs" "Czech language support" "off" \
 "kde-l10n-da" "Danish language support" "off" \
 "kde-l10n-de" "German language support" "off" \
 "kde-l10n-el" "Greek language support" "off" \
 "kde-l10n-en_GB" "English (UK) language support" "off" \
-"kde-l10n-eo" "Esperanto language support" "off" \
 "kde-l10n-es" "Spanish language support" "off" \
 "kde-l10n-et" "Estonian language support" "off" \
 "kde-l10n-eu" "Basque language support" "off" \
+"kde-l10n-fa" "Persian (Farsi) language support" "off" \
 "kde-l10n-fi" "Finnish language support" "off" \
 "kde-l10n-fr" "French language support" "off" \
-"kde-l10n-fy" "Abkhasysk language support" "off" \
 "kde-l10n-ga" "Irish language support" "off" \
 "kde-l10n-gl" "Galician language support" "off" \
-"kde-l10n-gu" "Gujarati language support" "off" \
 "kde-l10n-he" "Hebrew language support" "off" \
-"kde-l10n-hi" "Hindi language support" "off" \
 "kde-l10n-hr" "Croatian language support" "off" \
 "kde-l10n-hu" "Hungarian language support" "off" \
-"kde-l10n-ia" "Interlingua language support" "on" \
-"kde-l10n-id" "Indonesian language support" "on" \
+"kde-l10n-ia" "Interlingua language support" "off" \
+"kde-l10n-id" "Indonesian language support" "off" \
 "kde-l10n-is" "Icelandic language support" "off" \
 "kde-l10n-it" "Italian language support" "off" \
 "kde-l10n-ja" "Japanese language support" "off" \
 "kde-l10n-kk" "Kazakh language support" "off" \
 "kde-l10n-km" "Khmer language support" "off" \
-"kde-l10n-kn" "Kannada language support" "off" \
 "kde-l10n-ko" "Korean language support" "off" \
 "kde-l10n-lt" "Lithuanian language support" "off" \
 "kde-l10n-lv" "Latvian language support" "off" \
-"kde-l10n-ml" "Malayalam language support" "off" \
 "kde-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
 "kde-l10n-nds" "Low Saxon language support" "off" \
 "kde-l10n-nl" "Dutch language support" "off" \
@@ -56,49 +78,26 @@ when you are done." 21 74 12 \
 "kde-l10n-pt_BR" "Brazil Portuguese language support" "off" \
 "kde-l10n-ro" "Romanian language support" "off" \
 "kde-l10n-ru" "Russian language support" "off" \
+"kde-l10n-si" "Sinhala language support" "off" \
 "kde-l10n-sk" "Slovak language support" "off" \
 "kde-l10n-sl" "Slovenian language support" "off" \
 "kde-l10n-sr" "Serbian language support" "off" \
 "kde-l10n-sv" "Swedish language support" "off" \
+"kde-l10n-tg" "Tajik language support" "off" \
 "kde-l10n-th" "Thai language support" "off" \
 "kde-l10n-tr" "Turkish language support" "off" \
+"kde-l10n-ug" "Uyghur language support" "off" \
 "kde-l10n-uk" "Ukrainian language support" "off" \
+"kde-l10n-vi" "Vietnamese language support" "off" \
 "kde-l10n-wa" "Walloon language support" "off" \
 "kde-l10n-zh_CN" "Simplified Chinese language support" "off" \
 "kde-l10n-zh_TW" "Chinese language support" "off" \
-"koffice-l10n-ca" "Catalan language support" "off" \
-"koffice-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \
-"koffice-l10n-da" "Danish language support" "off" \
-"koffice-l10n-de" "German language support" "off" \
-"koffice-l10n-el" "Greek language support" "off" \
-"koffice-l10n-en_GB" "English (UK) language support" "off" \
-"koffice-l10n-es" "Spanish language support" "off" \
-"koffice-l10n-et" "Estonian language support" "off" \
-"koffice-l10n-fr" "French language support" "off" \
-"koffice-l10n-gl" "Galician language support" "off" \
-"koffice-l10n-hu" "Hungarian language support" "off" \
-"koffice-l10n-it" "Italian language support" "off" \
-"koffice-l10n-ja" "Japanese language support" "off" \
-"koffice-l10n-kk" "Kazakh language support" "off" \
-"koffice-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
-"koffice-l10n-nds" "Low Saxon language support" "off" \
-"koffice-l10n-nl" "Dutch language support" "off" \
-"koffice-l10n-pl" "Polish language support" "off" \
-"koffice-l10n-pt" "Portuguese language support" "off" \
-"koffice-l10n-pt_BR" "Brazil Portuguese language support" "off" \
-"koffice-l10n-ru" "Russian language support" "off" \
-"koffice-l10n-sv" "Swedish language support" "off" \
-"koffice-l10n-tr" "Turkish language support" "off" \
-"koffice-l10n-uk" "Ukrainian language support" "off" \
-"koffice-l10n-wa" "Walloon language support" "off" \
-"koffice-l10n-zh_CN" "Simplified Chinese language support" "off" \
-"koffice-l10n-zh_TW" "Chinese language support" "off" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-gl koffice-l10n-hu koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-ru koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \
+calligra-l10n-ca calligra-l10n-ca@valencia calligra-l10n-cs calligra-l10n-da calligra-l10n-de calligra-l10n-el calligra-l10n-en_GB calligra-l10n-es calligra-l10n-et calligra-l10n-fi calligra-l10n-fr calligra-l10n-hu calligra-l10n-it calligra-l10n-kk calligra-l10n-nb calligra-l10n-nds calligra-l10n-nl calligra-l10n-pl calligra-l10n-pt calligra-l10n-pt_BR calligra-l10n-ru calligra-l10n-sk calligra-l10n-sv calligra-l10n-uk calligra-l10n-zh_CN calligra-l10n-zh_TW kde-l10n-ar kde-l10n-bg kde-l10n-bs kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fa kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-he kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-ug kde-l10n-uk kde-l10n-vi kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -106,7 +105,7 @@ kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-gl koffice-l10n-hu koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-ru koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \
+calligra-l10n-ca calligra-l10n-ca@valencia calligra-l10n-cs calligra-l10n-da calligra-l10n-de calligra-l10n-el calligra-l10n-en_GB calligra-l10n-es calligra-l10n-et calligra-l10n-fi calligra-l10n-fr calligra-l10n-hu calligra-l10n-it calligra-l10n-kk calligra-l10n-nb calligra-l10n-nds calligra-l10n-nl calligra-l10n-pl calligra-l10n-pt calligra-l10n-pt_BR calligra-l10n-ru calligra-l10n-sk calligra-l10n-sv calligra-l10n-uk calligra-l10n-zh_CN calligra-l10n-zh_TW kde-l10n-ar kde-l10n-bg kde-l10n-bs kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fa kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-he kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-ug kde-l10n-uk kde-l10n-vi kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/kdei/maketag.ez b/slackware64/kdei/maketag.ez
index af2bc2d8..eece6bf0 100644
--- a/slackware64/kdei/maketag.ez
+++ b/slackware64/kdei/maketag.ez
@@ -11,41 +11,63 @@ within KDE for languages other than US English, please \
 select them from the list below. \
 Press ENTER \
 when you are done." 21 74 12 \
+"calligra-l10n-ca" "Catalan language support" "off" \
+"calligra-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \
+"calligra-l10n-cs" "Czech language support" "off" \
+"calligra-l10n-da" "Danish language support" "off" \
+"calligra-l10n-de" "German language support" "off" \
+"calligra-l10n-el" "Greek language support" "off" \
+"calligra-l10n-en_GB" "English (UK) language support" "off" \
+"calligra-l10n-es" "Spanish language support" "off" \
+"calligra-l10n-et" "Estonian language support" "off" \
+"calligra-l10n-fi" "Finnish language support" "off" \
+"calligra-l10n-fr" "French language support" "off" \
+"calligra-l10n-hu" "Hungarian language support" "off" \
+"calligra-l10n-it" "Italian language support" "off" \
+"calligra-l10n-kk" "Kazakh language support" "off" \
+"calligra-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
+"calligra-l10n-nds" "Low Saxon language support" "off" \
+"calligra-l10n-nl" "Dutch language support" "off" \
+"calligra-l10n-pl" "Polish language support" "off" \
+"calligra-l10n-pt" "Portuguese language support" "off" \
+"calligra-l10n-pt_BR" "Brazil Portuguese language support" "off" \
+"calligra-l10n-ru" "Russian language support" "off" \
+"calligra-l10n-sk" "Slovak language support" "off" \
+"calligra-l10n-sv" "Swedish language support" "off" \
+"calligra-l10n-uk" "Ukrainian language support" "off" \
+"calligra-l10n-zh_CN" "Simplified Chinese language support" "off" \
+"calligra-l10n-zh_TW" "Chinese language support" "off" \
 "kde-l10n-ar" "Arabic language support" "off" \
 "kde-l10n-bg" "Bulgarian language support" "off" \
+"kde-l10n-bs" "Bosnian language support" "off" \
 "kde-l10n-ca" "Catalan language support" "off" \
-"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "on" \
+"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "off" \
 "kde-l10n-cs" "Czech language support" "off" \
 "kde-l10n-da" "Danish language support" "off" \
 "kde-l10n-de" "German language support" "off" \
 "kde-l10n-el" "Greek language support" "off" \
 "kde-l10n-en_GB" "English (UK) language support" "off" \
-"kde-l10n-eo" "Esperanto language support" "off" \
 "kde-l10n-es" "Spanish language support" "off" \
 "kde-l10n-et" "Estonian language support" "off" \
 "kde-l10n-eu" "Basque language support" "off" \
+"kde-l10n-fa" "Persian (Farsi) language support" "off" \
 "kde-l10n-fi" "Finnish language support" "off" \
 "kde-l10n-fr" "French language support" "off" \
-"kde-l10n-fy" "Abkhasysk language support" "off" \
 "kde-l10n-ga" "Irish language support" "off" \
 "kde-l10n-gl" "Galician language support" "off" \
-"kde-l10n-gu" "Gujarati language support" "off" \
 "kde-l10n-he" "Hebrew language support" "off" \
-"kde-l10n-hi" "Hindi language support" "off" \
 "kde-l10n-hr" "Croatian language support" "off" \
 "kde-l10n-hu" "Hungarian language support" "off" \
-"kde-l10n-ia" "Interlingua language support" "on" \
-"kde-l10n-id" "Indonesian language support" "on" \
+"kde-l10n-ia" "Interlingua language support" "off" \
+"kde-l10n-id" "Indonesian language support" "off" \
 "kde-l10n-is" "Icelandic language support" "off" \
 "kde-l10n-it" "Italian language support" "off" \
 "kde-l10n-ja" "Japanese language support" "off" \
 "kde-l10n-kk" "Kazakh language support" "off" \
 "kde-l10n-km" "Khmer language support" "off" \
-"kde-l10n-kn" "Kannada language support" "off" \
 "kde-l10n-ko" "Korean language support" "off" \
 "kde-l10n-lt" "Lithuanian language support" "off" \
 "kde-l10n-lv" "Latvian language support" "off" \
-"kde-l10n-ml" "Malayalam language support" "off" \
 "kde-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
 "kde-l10n-nds" "Low Saxon language support" "off" \
 "kde-l10n-nl" "Dutch language support" "off" \
@@ -56,49 +78,26 @@ when you are done." 21 74 12 \
 "kde-l10n-pt_BR" "Brazil Portuguese language support" "off" \
 "kde-l10n-ro" "Romanian language support" "off" \
 "kde-l10n-ru" "Russian language support" "off" \
+"kde-l10n-si" "Sinhala language support" "off" \
 "kde-l10n-sk" "Slovak language support" "off" \
 "kde-l10n-sl" "Slovenian language support" "off" \
 "kde-l10n-sr" "Serbian language support" "off" \
 "kde-l10n-sv" "Swedish language support" "off" \
+"kde-l10n-tg" "Tajik language support" "off" \
 "kde-l10n-th" "Thai language support" "off" \
 "kde-l10n-tr" "Turkish language support" "off" \
+"kde-l10n-ug" "Uyghur language support" "off" \
 "kde-l10n-uk" "Ukrainian language support" "off" \
+"kde-l10n-vi" "Vietnamese language support" "off" \
 "kde-l10n-wa" "Walloon language support" "off" \
 "kde-l10n-zh_CN" "Simplified Chinese language support" "off" \
 "kde-l10n-zh_TW" "Chinese language support" "off" \
-"koffice-l10n-ca" "Catalan language support" "off" \
-"koffice-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \
-"koffice-l10n-da" "Danish language support" "off" \
-"koffice-l10n-de" "German language support" "off" \
-"koffice-l10n-el" "Greek language support" "off" \
-"koffice-l10n-en_GB" "English (UK) language support" "off" \
-"koffice-l10n-es" "Spanish language support" "off" \
-"koffice-l10n-et" "Estonian language support" "off" \
-"koffice-l10n-fr" "French language support" "off" \
-"koffice-l10n-gl" "Galician language support" "off" \
-"koffice-l10n-hu" "Hungarian language support" "off" \
-"koffice-l10n-it" "Italian language support" "off" \
-"koffice-l10n-ja" "Japanese language support" "off" \
-"koffice-l10n-kk" "Kazakh language support" "off" \
-"koffice-l10n-nb" "Norwegian (Bokmaal) language support" "off" \
-"koffice-l10n-nds" "Low Saxon language support" "off" \
-"koffice-l10n-nl" "Dutch language support" "off" \
-"koffice-l10n-pl" "Polish language support" "off" \
-"koffice-l10n-pt" "Portuguese language support" "off" \
-"koffice-l10n-pt_BR" "Brazil Portuguese language support" "off" \
-"koffice-l10n-ru" "Russian language support" "off" \
-"koffice-l10n-sv" "Swedish language support" "off" \
-"koffice-l10n-tr" "Turkish language support" "off" \
-"koffice-l10n-uk" "Ukrainian language support" "off" \
-"koffice-l10n-wa" "Walloon language support" "off" \
-"koffice-l10n-zh_CN" "Simplified Chinese language support" "off" \
-"koffice-l10n-zh_TW" "Chinese language support" "off" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-gl koffice-l10n-hu koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-ru koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \
+calligra-l10n-ca calligra-l10n-ca@valencia calligra-l10n-cs calligra-l10n-da calligra-l10n-de calligra-l10n-el calligra-l10n-en_GB calligra-l10n-es calligra-l10n-et calligra-l10n-fi calligra-l10n-fr calligra-l10n-hu calligra-l10n-it calligra-l10n-kk calligra-l10n-nb calligra-l10n-nds calligra-l10n-nl calligra-l10n-pl calligra-l10n-pt calligra-l10n-pt_BR calligra-l10n-ru calligra-l10n-sk calligra-l10n-sv calligra-l10n-uk calligra-l10n-zh_CN calligra-l10n-zh_TW kde-l10n-ar kde-l10n-bg kde-l10n-bs kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fa kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-he kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-ug kde-l10n-uk kde-l10n-vi kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -106,7 +105,7 @@ kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-gl koffice-l10n-hu koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-ru koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \
+calligra-l10n-ca calligra-l10n-ca@valencia calligra-l10n-cs calligra-l10n-da calligra-l10n-de calligra-l10n-el calligra-l10n-en_GB calligra-l10n-es calligra-l10n-et calligra-l10n-fi calligra-l10n-fr calligra-l10n-hu calligra-l10n-it calligra-l10n-kk calligra-l10n-nb calligra-l10n-nds calligra-l10n-nl calligra-l10n-pl calligra-l10n-pt calligra-l10n-pt_BR calligra-l10n-ru calligra-l10n-sk calligra-l10n-sv calligra-l10n-uk calligra-l10n-zh_CN calligra-l10n-zh_TW kde-l10n-ar kde-l10n-bg kde-l10n-bs kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fa kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-he kde-l10n-hr kde-l10n-hu kde-l10n-ia kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-ug kde-l10n-uk kde-l10n-vi kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/kdei/tagfile b/slackware64/kdei/tagfile
index a469d4ae..2bb169ae 100644
--- a/slackware64/kdei/tagfile
+++ b/slackware64/kdei/tagfile
@@ -1,5 +1,32 @@
+calligra-l10n-ca:OPT
+calligra-l10n-ca@valencia:OPT
+calligra-l10n-cs:OPT
+calligra-l10n-da:OPT
+calligra-l10n-de:OPT
+calligra-l10n-el:OPT
+calligra-l10n-en_GB:OPT
+calligra-l10n-es:OPT
+calligra-l10n-et:OPT
+calligra-l10n-fi:OPT
+calligra-l10n-fr:OPT
+calligra-l10n-hu:OPT
+calligra-l10n-it:OPT
+calligra-l10n-kk:OPT
+calligra-l10n-nb:OPT
+calligra-l10n-nds:OPT
+calligra-l10n-nl:OPT
+calligra-l10n-pl:OPT
+calligra-l10n-pt:OPT
+calligra-l10n-pt_BR:OPT
+calligra-l10n-ru:OPT
+calligra-l10n-sk:OPT
+calligra-l10n-sv:OPT
+calligra-l10n-uk:OPT
+calligra-l10n-zh_CN:OPT
+calligra-l10n-zh_TW:OPT
 kde-l10n-ar:OPT
 kde-l10n-bg:OPT
+kde-l10n-bs:OPT
 kde-l10n-ca:OPT
 kde-l10n-ca@valencia:OPT
 kde-l10n-cs:OPT
@@ -7,18 +34,15 @@ kde-l10n-da:OPT
 kde-l10n-de:OPT
 kde-l10n-el:OPT
 kde-l10n-en_GB:OPT
-kde-l10n-eo:OPT
 kde-l10n-es:OPT
 kde-l10n-et:OPT
 kde-l10n-eu:OPT
+kde-l10n-fa:OPT
 kde-l10n-fi:OPT
 kde-l10n-fr:OPT
-kde-l10n-fy:OPT
 kde-l10n-ga:OPT
 kde-l10n-gl:OPT
-kde-l10n-gu:OPT
 kde-l10n-he:OPT
-kde-l10n-hi:OPT
 kde-l10n-hr:OPT
 kde-l10n-hu:OPT
 kde-l10n-ia:OPT
@@ -28,11 +52,9 @@ kde-l10n-it:OPT
 kde-l10n-ja:OPT
 kde-l10n-kk:OPT
 kde-l10n-km:OPT
-kde-l10n-kn:OPT
 kde-l10n-ko:OPT
 kde-l10n-lt:OPT
 kde-l10n-lv:OPT
-kde-l10n-ml:OPT
 kde-l10n-nb:OPT
 kde-l10n-nds:OPT
 kde-l10n-nl:OPT
@@ -43,40 +65,17 @@ kde-l10n-pt:OPT
 kde-l10n-pt_BR:OPT
 kde-l10n-ro:OPT
 kde-l10n-ru:OPT
+kde-l10n-si:OPT
 kde-l10n-sk:OPT
 kde-l10n-sl:OPT
 kde-l10n-sr:OPT
 kde-l10n-sv:OPT
+kde-l10n-tg:OPT
 kde-l10n-th:OPT
 kde-l10n-tr:OPT
+kde-l10n-ug:OPT
 kde-l10n-uk:OPT
+kde-l10n-vi:OPT
 kde-l10n-wa:OPT
 kde-l10n-zh_CN:OPT
 kde-l10n-zh_TW:OPT
-koffice-l10n-ca:OPT
-koffice-l10n-ca@valencia:OPT
-koffice-l10n-da:OPT
-koffice-l10n-de:OPT
-koffice-l10n-el:OPT
-koffice-l10n-en_GB:OPT
-koffice-l10n-es:OPT
-koffice-l10n-et:OPT
-koffice-l10n-fr:OPT
-koffice-l10n-gl:OPT
-koffice-l10n-hu:OPT
-koffice-l10n-it:OPT
-koffice-l10n-ja:OPT
-koffice-l10n-kk:OPT
-koffice-l10n-nb:OPT
-koffice-l10n-nds:OPT
-koffice-l10n-nl:OPT
-koffice-l10n-pl:OPT
-koffice-l10n-pt:OPT
-koffice-l10n-pt_BR:OPT
-koffice-l10n-ru:OPT
-koffice-l10n-sv:OPT
-koffice-l10n-tr:OPT
-koffice-l10n-uk:OPT
-koffice-l10n-wa:OPT
-koffice-l10n-zh_CN:OPT
-koffice-l10n-zh_TW:OPT
diff --git a/slackware64/l/maketag b/slackware64/l/maketag
index 0483f961..c325caa5 100644
--- a/slackware64/l/maketag
+++ b/slackware64/l/maketag
@@ -14,6 +14,7 @@ or other parts of the system.  It's safest to install all of these \
 packages even if you aren't sure if you need them.  Press ENTER when \
 you are done." 22 74 10 \
 "ConsoleKit" "ConsoleKit user session framework" "on" \
+"GConf" "GNOME configuration library" "on" \
 "M2Crypto" "Cryptography toolkit for Python" "on" \
 "PyQt" "Python bindings for Qt" "on" \
 "QScintilla" "Qt port of the Scintilla C++ editor control" "on" \
@@ -36,6 +37,7 @@ you are done." 22 74 10 \
 "clucene" "Text-Search Engine" "on" \
 "db42" "Berkeley DB library, version 4.2" "on" \
 "db44" "Berkeley DB library, version 4.4" "on" \
+"db48" "Berkeley DB library, version 4.8" "on" \
 "dbus-glib" "glib bindings for the dbus IPC library" "on" \
 "dbus-python" "Python bindings for the D-Bus library" "on" \
 "desktop-file-utils" "Tools for .desktop files" "on" \
@@ -51,12 +53,15 @@ you are done." 22 74 10 \
 "fribidi" "Unicode BiDirectional library" "on" \
 "fuse" "Tools for using filesystems in userspace" "on" \
 "gamin" "a minimalist FAM replacement" "on" \
+"gcr" "crypto library and ui for gnome-keyring" "on" \
 "gd" "A graphics library" "on" \
 "gdbm" "The GNU gdbm database library" "on" \
 "gdk-pixbuf2" "Image library used by GTK+2" "on" \
 "gegl" "Generic Graphics Library" "on" \
 "giflib" "GIF image library" "on" \
+"glade3" "Glade UI Designer version 3" "on" \
 "glib" "Support library used by GTK+" "on" \
+"glib-networking" "network-related giomodules for glib" "on" \
 "glib2" "GLib version 2" "on" \
 "glibc" "The GNU C library" "on" \
 "glibc-i18n" "Internationalization support for glibc" "on" \
@@ -65,38 +70,53 @@ you are done." 22 74 10 \
 "gmm" "C++ generic matrix template library" "on" \
 "gmp" "A library for arithmetic" "on" \
 "gnome-icon-theme" "Icons for GTK+ applications" "on" \
+"gnome-keyring" "a tool to handle security credentials" "on" \
+"gobject-introspection" "GObject interface introspection library" "on" \
+"grantlee" "String Template system based on Qt" "on" \
+"gsettings-desktop-schemas" "GSettings schemas" "on" \
 "gst-plugins-base" "A base set of GStreamer plugins" "on" \
 "gst-plugins-good" "A good set of GStreamer plugins" "on" \
 "gstreamer" "Streaming multimedia framework library" "on" \
 "gtk+" "A graphical toolkit library" "on" \
 "gtk+2" "GTK+ version 2" "on" \
+"gtk+3" "GTK+ version 3" "on" \
 "gtkspell" "GTK+ spell checker interface library" "on" \
-"hal" "The HAL Hardware Abstraction Layer" "on" \
-"hal-info" "Hardware device info for HAL" "on" \
+"gvfs" "glib virtual filesystems" "on" \
+"herqq" "UPnP Device Architecture library" "on" \
 "hicolor-icon-theme" "Standard icon theme tree" "on" \
 "hunspell" "Spell checker and morphological analyzer" "on" \
 "icon-naming-utils" "Icon naming utilities" "on" \
+"icu4c" "International Components for Unicode" "on" \
 "ilmbase" "Industrial Light & Magic base libraries" "on" \
 "imlib" "Image loading and rendering library" "on" \
 "iso-codes" "ISO standard lists" "on" \
 "jasper" "JPEG-2000 library" "on" \
-"jre" "Runtime support for Java(TM)" "on" \
+"js185" "SpiderMonkey - Mozilla's JavaScript Engine" "on" \
+"keybinder" "keyboard shortcut library" "on" \
+"keyutils" "Kernel key management utilities" "on" \
 "lcms" "Little Color Management System" "on" \
+"lcms2" "little cms engine, version 2" "on" \
 "lesstif" "A Motif clone" "on" \
 "libaio" "Asynchronous I/O library" "on" \
 "libao" "Audio Output library" "on" \
 "libarchive" "Archive reading library" "on" \
 "libart_lgpl" "2D graphics library used by KDE" "on" \
+"libatasmart" "ATA S.M.A.R.T. library" "on" \
+"libbluedevil" "Qt wrapper for bluez" "on" \
 "libcaca" "Colour AsCii Art library" "on" \
+"libcanberra" "XDG Sound Theme and Name Spec implementation" "on" \
 "libcap" "POSIX capabilities library" "on" \
 "libcddb" "online CD database lookup library" "on" \
 "libcdio" "GNU CD I/O library" "on" \
+"libcroco" "CSS2 parsing and manipulation library" "on" \
 "libdbusmenu-qt" "Allows Qt/KDE apps to use DBus for menus" "on" \
 "libdiscid" "Library to generate DiscIDs from audio CDs" "on" \
 "libdvdread" "Library for reading DVDs" "on" \
 "libelf" "ELF object file access library" "on" \
 "libexif" "EXIF (image information) library" "on" \
+"libffi" "Foreign Function Interface library" "on" \
 "libglade" "An interface construction library" "on" \
+"libgnome-keyring" "gnome-keyring library" "on" \
 "libgphoto2" "A library for accessing digital cameras" "on" \
 "libgpod" "A library for a popular music device" "on" \
 "libgsf" "File I/O library" "on" \
@@ -119,6 +139,7 @@ you are done." 22 74 10 \
 "libmtp" "MTP media device support library" "on" \
 "libnjb" "Creative Nomad and related device library" "on" \
 "libnl" "Netlink socket library" "on" \
+"libnl3" "Netlink socket library version 3" "on" \
 "libnotify" "A library for event notification" "on" \
 "libogg" "Ogg Bitstream library" "on" \
 "liboggz" "Ogg inspect/edit/validate library" "on" \
@@ -126,15 +147,20 @@ you are done." 22 74 10 \
 "libpcap" "Packet Capture library" "on" \
 "libplist" "Apple Binary and XML Property Lists library" "on" \
 "libpng" "Portable Network Graphics library" "on" \
+"libproxy" "proxy configuration library" "on" \
 "libraw1394" "User space IEEE 1394 driver" "on" \
 "librsvg" "Scalable Vector Graphics library" "on" \
 "libsamplerate" "Digital audio resampling library" "on" \
 "libsndfile" "A library for handling digital audio files" "on" \
+"libsoup" "an HTTP client/server library" "on" \
 "libspectre" "Ghostscript wrapper library" "on" \
+"libssh" "SSH C library" "on" \
+"libtasn1" "ASN.1 library" "on" \
 "libtermcap" "GNU terminal control library" "on" \
 "libtheora" "Theora video codec library" "on" \
 "libtiff" "Tag Image File format library" "on" \
 "libusb" "A library for accessing USB devices" "on" \
+"libusb-compat" "Compat library for the old libusb API/ABI" "on" \
 "libvisual" "Audio visualization library" "on" \
 "libvisual-plugins" "Plugins for the libvisual library" "on" \
 "libvncserver" "VNC Server Library" "on" \
@@ -146,11 +172,14 @@ you are done." 22 74 10 \
 "libxklavier" "XKB library" "on" \
 "libxml2" "XML parser library v2" "on" \
 "libxslt" "XML transformation library" "on" \
+"libyaml" "YAML parser library" "on" \
 "libzip" "Zip archive library" "on" \
 "loudmouth" "Jabber protocol library" "on" \
 "lzo" "fast data compression library" "on" \
+"media-player-info" "media player capability data" "on" \
 "mhash" "Thread-safe hash library" "on" \
 "mm" "Shared Memory Allocation library" "on" \
+"mozilla-nss" "Mozilla NSS/NSPR libraries" "on" \
 "mpfr" "Another math lib based on GMP" "on" \
 "ncurses" "CRT screen handling package" "on" \
 "neon" "HTTP and WebDAV client library" "on" \
@@ -161,16 +190,20 @@ you are done." 22 74 10 \
 "parted" "GNU parted, a partition manipulation program" "on" \
 "pcre" "Perl-compatible regular expression library" "on" \
 "phonon" "Multimedia framework for KDE4" "on" \
+"phonon-gstreamer" "gstreamer backend for phonon" "on" \
 "phonon-mplayer" "MPlayer backend for Phonon" "on" \
+"phonon-xine" "xine backend for phonon" "on" \
 "pil" "Python Imaging Library" "on" \
 "pilot-link" "PalmOS communication library" "on" \
 "polkit" "Authentication policy framework" "on" \
 "polkit-gnome" "GTK+/XDG polkit authenticator" "on" \
+"polkit-qt-1" "Qt wrapper for the polkit API" "on" \
 "poppler" "Portable Document Format (PDF) library" "on" \
 "poppler-data" "Data files that can be used by poppler" "on" \
 "popt" "Command line parsing library" "on" \
 "pycairo" "Python bindings for cairo" "on" \
 "pycups" "Python bindings for the CUPS API" "on" \
+"pycurl" "Python interface to cURL library" "on" \
 "pygobject" "GObject bindings for Python" "on" \
 "pygtk" "GTK+ bindings for Python" "on" \
 "pyrex" "A Python extension language" "on" \
@@ -181,18 +214,20 @@ you are done." 22 74 10 \
 "qimageblitz" "Graphical effect/filter library for KDE4" "on" \
 "qt" "C++ GUI library used by KDE" "on" \
 "qtscriptgenerator" "Qt API Bindings for QtScript" "on" \
-"raptor" "RDF parser and serializer" "on" \
+"raptor2" "RDF parser and serializer" "on" \
 "rasqal" "RDF parsing library" "on" \
 "readline" "Input library with editing" "on" \
 "redland" "RDF high-level interface library" "on" \
 "sdl" "Simple DirectMedia Layer library" "on" \
 "seamonkey-solibs" "SeaMonkey shared libraries (runtime subset)" "on" \
+"sg3_utils" "low-level SCSI utilities" "on" \
 "shared-desktop-ontologies" "Shared OSCAF desktop ontologies" "on" \
 "shared-mime-info" "MIME database" "on" \
 "sip" "Tool for generating Python bindings" "on" \
 "slang" "S-Lang interpreted language and library v2" "on" \
 "slang1" "S-Lang interpreted language and library v1" "on" \
 "soprano" "C++/Qt4 framework for RDF data" "on" \
+"sound-theme-freedesktop" "freedesktop.org sound theme" "on" \
 "startup-notification" "Busy cursor library" "on" \
 "strigi" "Fast and light desktop search engine" "on" \
 "svgalib" "Super-VGA Graphics Library" "on" \
@@ -207,14 +242,13 @@ you are done." 22 74 10 \
 "virtuoso-ose" "Object-relational SQL database" "on" \
 "vte" "A terminal emulator for GTK+" "on" \
 "wavpack" "A lossless WAV file compressor" "on" \
-"wv2" "MS Word .doc import library" "on" \
 "zlib" "general purpose data compression library" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gdk-pixbuf2 gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdbusmenu-qt libdiscid libdvdread libelf libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnotify libogg liboggz liboil libpcap libplist libpng libraw1394 librsvg libsamplerate libsndfile libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-mplayer pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \
+ConsoleKit GConf M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 db48 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gcr gd gdbm gdk-pixbuf2 gegl giflib glade3 glib glib-networking glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gnome-keyring gobject-introspection grantlee gsettings-desktop-schemas gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtk+3 gtkspell gvfs herqq hicolor-icon-theme hunspell icon-naming-utils icu4c ilmbase imlib iso-codes jasper js185 keybinder keyutils lcms lcms2 lesstif libaio libao libarchive libart_lgpl libatasmart libbluedevil libcaca libcanberra libcap libcddb libcdio libcroco libdbusmenu-qt libdiscid libdvdread libelf libexif libffi libglade libgnome-keyring libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnl3 libnotify libogg liboggz liboil libpcap libplist libpng libproxy libraw1394 librsvg libsamplerate libsndfile libsoup libspectre libssh libtasn1 libtermcap libtheora libtiff libusb libusb-compat libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libyaml libzip loudmouth lzo media-player-info mhash mm mozilla-nss mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-gstreamer phonon-mplayer phonon-xine pil pilot-link polkit polkit-gnome polkit-qt-1 poppler poppler-data popt pycairo pycups pycurl pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor2 rasqal readline redland sdl seamonkey-solibs sg3_utils shared-desktop-ontologies shared-mime-info sip slang slang1 soprano sound-theme-freedesktop startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack zlib \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -222,7 +256,7 @@ ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gdk-pixbuf2 gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdbusmenu-qt libdiscid libdvdread libelf libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnotify libogg liboggz liboil libpcap libplist libpng libraw1394 librsvg libsamplerate libsndfile libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-mplayer pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \
+ConsoleKit GConf M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 db48 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gcr gd gdbm gdk-pixbuf2 gegl giflib glade3 glib glib-networking glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gnome-keyring gobject-introspection grantlee gsettings-desktop-schemas gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtk+3 gtkspell gvfs herqq hicolor-icon-theme hunspell icon-naming-utils icu4c ilmbase imlib iso-codes jasper js185 keybinder keyutils lcms lcms2 lesstif libaio libao libarchive libart_lgpl libatasmart libbluedevil libcaca libcanberra libcap libcddb libcdio libcroco libdbusmenu-qt libdiscid libdvdread libelf libexif libffi libglade libgnome-keyring libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnl3 libnotify libogg liboggz liboil libpcap libplist libpng libproxy libraw1394 librsvg libsamplerate libsndfile libsoup libspectre libssh libtasn1 libtermcap libtheora libtiff libusb libusb-compat libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libyaml libzip loudmouth lzo media-player-info mhash mm mozilla-nss mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-gstreamer phonon-mplayer phonon-xine pil pilot-link polkit polkit-gnome polkit-qt-1 poppler poppler-data popt pycairo pycups pycurl pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor2 rasqal readline redland sdl seamonkey-solibs sg3_utils shared-desktop-ontologies shared-mime-info sip slang slang1 soprano sound-theme-freedesktop startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack zlib \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/l/maketag.ez b/slackware64/l/maketag.ez
index 0483f961..c325caa5 100644
--- a/slackware64/l/maketag.ez
+++ b/slackware64/l/maketag.ez
@@ -14,6 +14,7 @@ or other parts of the system.  It's safest to install all of these \
 packages even if you aren't sure if you need them.  Press ENTER when \
 you are done." 22 74 10 \
 "ConsoleKit" "ConsoleKit user session framework" "on" \
+"GConf" "GNOME configuration library" "on" \
 "M2Crypto" "Cryptography toolkit for Python" "on" \
 "PyQt" "Python bindings for Qt" "on" \
 "QScintilla" "Qt port of the Scintilla C++ editor control" "on" \
@@ -36,6 +37,7 @@ you are done." 22 74 10 \
 "clucene" "Text-Search Engine" "on" \
 "db42" "Berkeley DB library, version 4.2" "on" \
 "db44" "Berkeley DB library, version 4.4" "on" \
+"db48" "Berkeley DB library, version 4.8" "on" \
 "dbus-glib" "glib bindings for the dbus IPC library" "on" \
 "dbus-python" "Python bindings for the D-Bus library" "on" \
 "desktop-file-utils" "Tools for .desktop files" "on" \
@@ -51,12 +53,15 @@ you are done." 22 74 10 \
 "fribidi" "Unicode BiDirectional library" "on" \
 "fuse" "Tools for using filesystems in userspace" "on" \
 "gamin" "a minimalist FAM replacement" "on" \
+"gcr" "crypto library and ui for gnome-keyring" "on" \
 "gd" "A graphics library" "on" \
 "gdbm" "The GNU gdbm database library" "on" \
 "gdk-pixbuf2" "Image library used by GTK+2" "on" \
 "gegl" "Generic Graphics Library" "on" \
 "giflib" "GIF image library" "on" \
+"glade3" "Glade UI Designer version 3" "on" \
 "glib" "Support library used by GTK+" "on" \
+"glib-networking" "network-related giomodules for glib" "on" \
 "glib2" "GLib version 2" "on" \
 "glibc" "The GNU C library" "on" \
 "glibc-i18n" "Internationalization support for glibc" "on" \
@@ -65,38 +70,53 @@ you are done." 22 74 10 \
 "gmm" "C++ generic matrix template library" "on" \
 "gmp" "A library for arithmetic" "on" \
 "gnome-icon-theme" "Icons for GTK+ applications" "on" \
+"gnome-keyring" "a tool to handle security credentials" "on" \
+"gobject-introspection" "GObject interface introspection library" "on" \
+"grantlee" "String Template system based on Qt" "on" \
+"gsettings-desktop-schemas" "GSettings schemas" "on" \
 "gst-plugins-base" "A base set of GStreamer plugins" "on" \
 "gst-plugins-good" "A good set of GStreamer plugins" "on" \
 "gstreamer" "Streaming multimedia framework library" "on" \
 "gtk+" "A graphical toolkit library" "on" \
 "gtk+2" "GTK+ version 2" "on" \
+"gtk+3" "GTK+ version 3" "on" \
 "gtkspell" "GTK+ spell checker interface library" "on" \
-"hal" "The HAL Hardware Abstraction Layer" "on" \
-"hal-info" "Hardware device info for HAL" "on" \
+"gvfs" "glib virtual filesystems" "on" \
+"herqq" "UPnP Device Architecture library" "on" \
 "hicolor-icon-theme" "Standard icon theme tree" "on" \
 "hunspell" "Spell checker and morphological analyzer" "on" \
 "icon-naming-utils" "Icon naming utilities" "on" \
+"icu4c" "International Components for Unicode" "on" \
 "ilmbase" "Industrial Light & Magic base libraries" "on" \
 "imlib" "Image loading and rendering library" "on" \
 "iso-codes" "ISO standard lists" "on" \
 "jasper" "JPEG-2000 library" "on" \
-"jre" "Runtime support for Java(TM)" "on" \
+"js185" "SpiderMonkey - Mozilla's JavaScript Engine" "on" \
+"keybinder" "keyboard shortcut library" "on" \
+"keyutils" "Kernel key management utilities" "on" \
 "lcms" "Little Color Management System" "on" \
+"lcms2" "little cms engine, version 2" "on" \
 "lesstif" "A Motif clone" "on" \
 "libaio" "Asynchronous I/O library" "on" \
 "libao" "Audio Output library" "on" \
 "libarchive" "Archive reading library" "on" \
 "libart_lgpl" "2D graphics library used by KDE" "on" \
+"libatasmart" "ATA S.M.A.R.T. library" "on" \
+"libbluedevil" "Qt wrapper for bluez" "on" \
 "libcaca" "Colour AsCii Art library" "on" \
+"libcanberra" "XDG Sound Theme and Name Spec implementation" "on" \
 "libcap" "POSIX capabilities library" "on" \
 "libcddb" "online CD database lookup library" "on" \
 "libcdio" "GNU CD I/O library" "on" \
+"libcroco" "CSS2 parsing and manipulation library" "on" \
 "libdbusmenu-qt" "Allows Qt/KDE apps to use DBus for menus" "on" \
 "libdiscid" "Library to generate DiscIDs from audio CDs" "on" \
 "libdvdread" "Library for reading DVDs" "on" \
 "libelf" "ELF object file access library" "on" \
 "libexif" "EXIF (image information) library" "on" \
+"libffi" "Foreign Function Interface library" "on" \
 "libglade" "An interface construction library" "on" \
+"libgnome-keyring" "gnome-keyring library" "on" \
 "libgphoto2" "A library for accessing digital cameras" "on" \
 "libgpod" "A library for a popular music device" "on" \
 "libgsf" "File I/O library" "on" \
@@ -119,6 +139,7 @@ you are done." 22 74 10 \
 "libmtp" "MTP media device support library" "on" \
 "libnjb" "Creative Nomad and related device library" "on" \
 "libnl" "Netlink socket library" "on" \
+"libnl3" "Netlink socket library version 3" "on" \
 "libnotify" "A library for event notification" "on" \
 "libogg" "Ogg Bitstream library" "on" \
 "liboggz" "Ogg inspect/edit/validate library" "on" \
@@ -126,15 +147,20 @@ you are done." 22 74 10 \
 "libpcap" "Packet Capture library" "on" \
 "libplist" "Apple Binary and XML Property Lists library" "on" \
 "libpng" "Portable Network Graphics library" "on" \
+"libproxy" "proxy configuration library" "on" \
 "libraw1394" "User space IEEE 1394 driver" "on" \
 "librsvg" "Scalable Vector Graphics library" "on" \
 "libsamplerate" "Digital audio resampling library" "on" \
 "libsndfile" "A library for handling digital audio files" "on" \
+"libsoup" "an HTTP client/server library" "on" \
 "libspectre" "Ghostscript wrapper library" "on" \
+"libssh" "SSH C library" "on" \
+"libtasn1" "ASN.1 library" "on" \
 "libtermcap" "GNU terminal control library" "on" \
 "libtheora" "Theora video codec library" "on" \
 "libtiff" "Tag Image File format library" "on" \
 "libusb" "A library for accessing USB devices" "on" \
+"libusb-compat" "Compat library for the old libusb API/ABI" "on" \
 "libvisual" "Audio visualization library" "on" \
 "libvisual-plugins" "Plugins for the libvisual library" "on" \
 "libvncserver" "VNC Server Library" "on" \
@@ -146,11 +172,14 @@ you are done." 22 74 10 \
 "libxklavier" "XKB library" "on" \
 "libxml2" "XML parser library v2" "on" \
 "libxslt" "XML transformation library" "on" \
+"libyaml" "YAML parser library" "on" \
 "libzip" "Zip archive library" "on" \
 "loudmouth" "Jabber protocol library" "on" \
 "lzo" "fast data compression library" "on" \
+"media-player-info" "media player capability data" "on" \
 "mhash" "Thread-safe hash library" "on" \
 "mm" "Shared Memory Allocation library" "on" \
+"mozilla-nss" "Mozilla NSS/NSPR libraries" "on" \
 "mpfr" "Another math lib based on GMP" "on" \
 "ncurses" "CRT screen handling package" "on" \
 "neon" "HTTP and WebDAV client library" "on" \
@@ -161,16 +190,20 @@ you are done." 22 74 10 \
 "parted" "GNU parted, a partition manipulation program" "on" \
 "pcre" "Perl-compatible regular expression library" "on" \
 "phonon" "Multimedia framework for KDE4" "on" \
+"phonon-gstreamer" "gstreamer backend for phonon" "on" \
 "phonon-mplayer" "MPlayer backend for Phonon" "on" \
+"phonon-xine" "xine backend for phonon" "on" \
 "pil" "Python Imaging Library" "on" \
 "pilot-link" "PalmOS communication library" "on" \
 "polkit" "Authentication policy framework" "on" \
 "polkit-gnome" "GTK+/XDG polkit authenticator" "on" \
+"polkit-qt-1" "Qt wrapper for the polkit API" "on" \
 "poppler" "Portable Document Format (PDF) library" "on" \
 "poppler-data" "Data files that can be used by poppler" "on" \
 "popt" "Command line parsing library" "on" \
 "pycairo" "Python bindings for cairo" "on" \
 "pycups" "Python bindings for the CUPS API" "on" \
+"pycurl" "Python interface to cURL library" "on" \
 "pygobject" "GObject bindings for Python" "on" \
 "pygtk" "GTK+ bindings for Python" "on" \
 "pyrex" "A Python extension language" "on" \
@@ -181,18 +214,20 @@ you are done." 22 74 10 \
 "qimageblitz" "Graphical effect/filter library for KDE4" "on" \
 "qt" "C++ GUI library used by KDE" "on" \
 "qtscriptgenerator" "Qt API Bindings for QtScript" "on" \
-"raptor" "RDF parser and serializer" "on" \
+"raptor2" "RDF parser and serializer" "on" \
 "rasqal" "RDF parsing library" "on" \
 "readline" "Input library with editing" "on" \
 "redland" "RDF high-level interface library" "on" \
 "sdl" "Simple DirectMedia Layer library" "on" \
 "seamonkey-solibs" "SeaMonkey shared libraries (runtime subset)" "on" \
+"sg3_utils" "low-level SCSI utilities" "on" \
 "shared-desktop-ontologies" "Shared OSCAF desktop ontologies" "on" \
 "shared-mime-info" "MIME database" "on" \
 "sip" "Tool for generating Python bindings" "on" \
 "slang" "S-Lang interpreted language and library v2" "on" \
 "slang1" "S-Lang interpreted language and library v1" "on" \
 "soprano" "C++/Qt4 framework for RDF data" "on" \
+"sound-theme-freedesktop" "freedesktop.org sound theme" "on" \
 "startup-notification" "Busy cursor library" "on" \
 "strigi" "Fast and light desktop search engine" "on" \
 "svgalib" "Super-VGA Graphics Library" "on" \
@@ -207,14 +242,13 @@ you are done." 22 74 10 \
 "virtuoso-ose" "Object-relational SQL database" "on" \
 "vte" "A terminal emulator for GTK+" "on" \
 "wavpack" "A lossless WAV file compressor" "on" \
-"wv2" "MS Word .doc import library" "on" \
 "zlib" "general purpose data compression library" "on" \
 2> $TMP/SeTpkgs
 if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gdk-pixbuf2 gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdbusmenu-qt libdiscid libdvdread libelf libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnotify libogg liboggz liboil libpcap libplist libpng libraw1394 librsvg libsamplerate libsndfile libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-mplayer pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \
+ConsoleKit GConf M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 db48 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gcr gd gdbm gdk-pixbuf2 gegl giflib glade3 glib glib-networking glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gnome-keyring gobject-introspection grantlee gsettings-desktop-schemas gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtk+3 gtkspell gvfs herqq hicolor-icon-theme hunspell icon-naming-utils icu4c ilmbase imlib iso-codes jasper js185 keybinder keyutils lcms lcms2 lesstif libaio libao libarchive libart_lgpl libatasmart libbluedevil libcaca libcanberra libcap libcddb libcdio libcroco libdbusmenu-qt libdiscid libdvdread libelf libexif libffi libglade libgnome-keyring libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnl3 libnotify libogg liboggz liboil libpcap libplist libpng libproxy libraw1394 librsvg libsamplerate libsndfile libsoup libspectre libssh libtasn1 libtermcap libtheora libtiff libusb libusb-compat libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libyaml libzip loudmouth lzo media-player-info mhash mm mozilla-nss mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-gstreamer phonon-mplayer phonon-xine pil pilot-link polkit polkit-gnome polkit-qt-1 poppler poppler-data popt pycairo pycups pycurl pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor2 rasqal readline redland sdl seamonkey-solibs sg3_utils shared-desktop-ontologies shared-mime-info sip slang slang1 soprano sound-theme-freedesktop startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack zlib \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -222,7 +256,7 @@ ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gdk-pixbuf2 gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdbusmenu-qt libdiscid libdvdread libelf libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnotify libogg liboggz liboil libpcap libplist libpng libraw1394 librsvg libsamplerate libsndfile libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-mplayer pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \
+ConsoleKit GConf M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 db48 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gcr gd gdbm gdk-pixbuf2 gegl giflib glade3 glib glib-networking glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gnome-keyring gobject-introspection grantlee gsettings-desktop-schemas gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtk+3 gtkspell gvfs herqq hicolor-icon-theme hunspell icon-naming-utils icu4c ilmbase imlib iso-codes jasper js185 keybinder keyutils lcms lcms2 lesstif libaio libao libarchive libart_lgpl libatasmart libbluedevil libcaca libcanberra libcap libcddb libcdio libcroco libdbusmenu-qt libdiscid libdvdread libelf libexif libffi libglade libgnome-keyring libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmpc libmsn libmtp libnjb libnl libnl3 libnotify libogg liboggz liboil libpcap libplist libpng libproxy libraw1394 librsvg libsamplerate libsndfile libsoup libspectre libssh libtasn1 libtermcap libtheora libtiff libusb libusb-compat libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libyaml libzip loudmouth lzo media-player-info mhash mm mozilla-nss mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon phonon-gstreamer phonon-mplayer phonon-xine pil pilot-link polkit polkit-gnome polkit-qt-1 poppler poppler-data popt pycairo pycups pycurl pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor2 rasqal readline redland sdl seamonkey-solibs sg3_utils shared-desktop-ontologies shared-mime-info sip slang slang1 soprano sound-theme-freedesktop startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack zlib \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/l/tagfile b/slackware64/l/tagfile
index 0352996d..722c94a2 100644
--- a/slackware64/l/tagfile
+++ b/slackware64/l/tagfile
@@ -1,4 +1,5 @@
 ConsoleKit:ADD
+GConf:REC
 M2Crypto:REC
 PyQt:REC
 QScintilla:REC
@@ -21,6 +22,7 @@ chmlib:REC
 clucene:REC
 db42:REC
 db44:REC
+db48:REC
 dbus-glib:REC
 dbus-python:REC
 desktop-file-utils:REC
@@ -36,12 +38,15 @@ freetype:REC
 fribidi:REC
 fuse:OPT
 gamin:REC
+gcr:REC
 gd:REC
 gdbm:REC
 gdk-pixbuf2:REC
 gegl:REC
 giflib:REC
+glade3:REC
 glib:REC
+glib-networking:REC
 glib2:REC
 glibc:REC
 glibc-i18n:OPT
@@ -50,38 +55,53 @@ gmime:REC
 gmm:REC
 gmp:REC
 gnome-icon-theme:REC
+gnome-keyring:REC
+gobject-introspection:REC
+grantlee:REC
+gsettings-desktop-schemas:REC
 gst-plugins-base:ADD
 gst-plugins-good:ADD
 gstreamer:ADD
 gtk+:REC
 gtk+2:REC
+gtk+3:REC
 gtkspell:REC
-hal:REC
-hal-info:REC
+gvfs:REC
+herqq:REC
 hicolor-icon-theme:REC
 hunspell:ADD
 icon-naming-utils:REC
+icu4c:REC
 ilmbase:REC
 imlib:REC
 iso-codes:REC
 jasper:REC
-jre:OPT
+js185:REC
+keybinder:REC
+keyutils:OPT
 lcms:REC
+lcms2:REC
 lesstif:REC
 libaio:REC
 libao:REC
 libarchive:REC
 libart_lgpl:REC
+libatasmart:REC
+libbluedevil:REC
 libcaca:OPT
+libcanberra:REC
 libcap:REC
 libcddb:REC
 libcdio:REC
+libcroco:REC
 libdbusmenu-qt:REC
 libdiscid:ADD
 libdvdread:REC
 libelf:REC
 libexif:REC
+libffi:REC
 libglade:REC
+libgnome-keyring:REC
 libgphoto2:REC
 libgpod:REC
 libgsf:REC
@@ -104,6 +124,7 @@ libmsn:REC
 libmtp:REC
 libnjb:REC
 libnl:REC
+libnl3:REC
 libnotify:REC
 libogg:REC
 liboggz:REC
@@ -111,15 +132,20 @@ liboil:REC
 libpcap:REC
 libplist:REC
 libpng:REC
+libproxy:REC
 libraw1394:REC
 librsvg:REC
 libsamplerate:REC
 libsndfile:REC
+libsoup:REC
 libspectre:REC
+libssh:REC
+libtasn1:REC
 libtermcap:REC
 libtheora:REC
 libtiff:REC
 libusb:REC
+libusb-compat:REC
 libvisual:REC
 libvisual-plugins:REC
 libvncserver:REC
@@ -131,11 +157,14 @@ libwpd:REC
 libxklavier:REC
 libxml2:REC
 libxslt:REC
+libyaml:REC
 libzip:REC
 loudmouth:OPT
 lzo:OPT
+media-player-info:REC
 mhash:REC
 mm:REC
+mozilla-nss:REC
 mpfr:REC
 ncurses:REC
 neon:REC
@@ -146,16 +175,20 @@ pango:REC
 parted:ADD
 pcre:REC
 phonon:REC
+phonon-gstreamer:REC
 phonon-mplayer:REC
+phonon-xine:REC
 pil:REC
 pilot-link:REC
 polkit:ADD
 polkit-gnome:ADD
+polkit-qt-1:ADD
 poppler:OPT
 poppler-data:OPT
 popt:REC
 pycairo:REC
 pycups:REC
+pycurl:REC
 pygobject:REC
 pygtk:REC
 pyrex:REC
@@ -166,18 +199,20 @@ qca-ossl:REC
 qimageblitz:REC
 qt:ADD
 qtscriptgenerator:ADD
-raptor:REC
+raptor2:REC
 rasqal:REC
 readline:REC
 redland:REC
 sdl:REC
 seamonkey-solibs:REC
+sg3_utils:REC
 shared-desktop-ontologies:ADD
 shared-mime-info:REC
 sip:REC
 slang:REC
 slang1:REC
 soprano:REC
+sound-theme-freedesktop:REC
 startup-notification:ADD
 strigi:REC
 svgalib:REC
@@ -192,5 +227,4 @@ v4l-utils:REC
 virtuoso-ose:ADD
 vte:REC
 wavpack:OPT
-wv2:REC
 zlib:REC
diff --git a/slackware64/n/maketag b/slackware64/n/maketag
index 61789705..3457fe92 100644
--- a/slackware64/n/maketag
+++ b/slackware64/n/maketag
@@ -11,6 +11,8 @@ from series N.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are done." \
 21 72 11 \
+"ModemManager" "mobile broadband modem D-bus API" "on" \
+"NetworkManager" "Networking configuration daemon" "on" \
 "alpine" "Alpine menu-driven mail program" "on" \
 "autofs" "Linux automounter" "on" \
 "biff+comsat" "Announces email delivery" "on" \
@@ -22,6 +24,7 @@ Press ENTER when you are done." \
 "bridge-utils" "Tools for setting up Ethernet bridges" "on" \
 "bsd-finger" "BSD finger daemon and client" "on" \
 "ca-certificates" "PEM certificates to verify SSL connections" "on" \
+"cifs-utils" "CIFS filesystem utilities" "on" \
 "crda" "Central Regulatory Domain Agent" "on" \
 "curl" "Command-line URL transfer utility" "on" \
 "cyrus-sasl" "SASL email authentication library" "on" \
@@ -43,6 +46,7 @@ Press ENTER when you are done." \
 "httpd" "Apache WWW (HTTP) server" "on" \
 "icmpinfo" "Dump or log ICMP packets" "on" \
 "idnkit" "internationalized domain names toolkit" "on" \
+"iftop" "Display bandwidth usage on an interface" "on" \
 "imapd" "ipop3d/imapd remote mail access daemons" "on" \
 "inetd" "Internet super server daemon" "on" \
 "iproute2" "Kernel routing and traffic control" "on" \
@@ -53,14 +57,6 @@ Press ENTER when you are done." \
 "ipw2200-fw" "Firmware for Intel ipw2200 wireless." "on" \
 "irssi" "IRSSI Internet Relay Chat (IRC) client" "on" \
 "iw" "Utility for mac80211 based wireless devices" "on" \
-"iwlwifi-100-ucode" "Microcode for Intel Centrino N 100 wireless" "on" \
-"iwlwifi-1000-ucode" "Microcode for Intel 1000 wireless chips" "on" \
-"iwlwifi-3945-ucode" "Microcode for Intel 3945 wireless chips" "on" \
-"iwlwifi-4965-ucode" "Microcode for Intel 4965 wireless chips" "on" \
-"iwlwifi-5000-ucode" "Microcode for Intel 5000 wireless chips" "on" \
-"iwlwifi-5150-ucode" "Microcode for Intel 5150 wireless chips" "on" \
-"iwlwifi-6000-ucode" "Microcode for Intel 6000 wireless chips" "on" \
-"iwlwifi-6xxx-ucode" "Microcode for Intel 6XXX wireless chips" "on" \
 "lftp" "Shell-like FTP and HTTP transfer program" "on" \
 "libassuan" "Interprocess Communication Library for GPG" "on" \
 "libgcrypt" "General purpose crypto library" "on" \
@@ -71,6 +67,7 @@ Press ENTER when you are done." \
 "mailx" "A simple user mail program" "on" \
 "mcabber" "Jabber messaging client for the console" "on" \
 "metamail" "Metamail multimedia mail extensions" "on" \
+"mobile-broadband-provider-info" "mobile broadband provider settings" "on" \
 "mtr" "Network diagnosic tool" "on" \
 "mutt" "The Mutt E-Mail Client" "on" \
 "nc" "Netcat network utility" "on" \
@@ -89,6 +86,7 @@ Press ENTER when you are done." \
 "netkit-rwho" "See information about users on the local net" "on" \
 "netkit-timed" "BSD time server daemon" "on" \
 "netpipes" "Network pipe utilities" "on" \
+"nettle" "Cryptographic library" "on" \
 "netwatch" "Another network monitoring program" "on" \
 "network-scripts" "Scripts required for networking on Slackware" "on" \
 "netwrite" "Write to users on a remote machine" "on" \
@@ -105,6 +103,7 @@ Press ENTER when you are done." \
 "openssh" "OpenSSH Secure Shell" "on" \
 "openssl" "OpenSSL Secure Sockets Layer toolkit" "on" \
 "openvpn" "Secure IP VPN tunnel daemon" "on" \
+"p11-kit" "PKCS 11 public key toolkit" "on" \
 "php" "PHP scripting language for Apache" "on" \
 "pidentd" "TCP/IP IDENT protocol server" "on" \
 "pinentry" "PIN Entry dialogs" "on" \
@@ -119,10 +118,6 @@ Press ENTER when you are done." \
 "rfkill" "tool to query wireless interfaces" "on" \
 "rp-pppoe" "Connect to ADSL ISPs that use PPPoE" "on" \
 "rsync" "Enhanced replacement for rcp" "on" \
-"rt2860-firmware" "Firmware for rt2860 PCI wireless cards." "on" \
-"rt2870-firmware" "Firmware for rt2870 USB wireless cards." "on" \
-"rt61-firmware" "Firmware for rt61 wireless cards." "on" \
-"rt71w-firmware" "Firmware for rt71w wireless cards." "on" \
 "samba" "SMB print/file server for Windows LANs" "on" \
 "sendmail" "The sendmail mail transport agent" "on" \
 "sendmail-cf" "Extra configuration files for sendmail" "on" \
@@ -151,7 +146,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-100-ucode iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode iwlwifi-6xxx-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
+ModemManager NetworkManager alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates cifs-utils crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit iftop imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mobile-broadband-provider-info mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes nettle netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn p11-kit php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -159,7 +154,7 @@ alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-u
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-100-ucode iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode iwlwifi-6xxx-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
+ModemManager NetworkManager alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates cifs-utils crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit iftop imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mobile-broadband-provider-info mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes nettle netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn p11-kit php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/n/maketag.ez b/slackware64/n/maketag.ez
index 61789705..3457fe92 100644
--- a/slackware64/n/maketag.ez
+++ b/slackware64/n/maketag.ez
@@ -11,6 +11,8 @@ from series N.  Use the UP/DOWN keys to scroll through the list, and \
 the SPACE key to deselect any items you don't want to install.  \
 Press ENTER when you are done." \
 21 72 11 \
+"ModemManager" "mobile broadband modem D-bus API" "on" \
+"NetworkManager" "Networking configuration daemon" "on" \
 "alpine" "Alpine menu-driven mail program" "on" \
 "autofs" "Linux automounter" "on" \
 "biff+comsat" "Announces email delivery" "on" \
@@ -22,6 +24,7 @@ Press ENTER when you are done." \
 "bridge-utils" "Tools for setting up Ethernet bridges" "on" \
 "bsd-finger" "BSD finger daemon and client" "on" \
 "ca-certificates" "PEM certificates to verify SSL connections" "on" \
+"cifs-utils" "CIFS filesystem utilities" "on" \
 "crda" "Central Regulatory Domain Agent" "on" \
 "curl" "Command-line URL transfer utility" "on" \
 "cyrus-sasl" "SASL email authentication library" "on" \
@@ -43,6 +46,7 @@ Press ENTER when you are done." \
 "httpd" "Apache WWW (HTTP) server" "on" \
 "icmpinfo" "Dump or log ICMP packets" "on" \
 "idnkit" "internationalized domain names toolkit" "on" \
+"iftop" "Display bandwidth usage on an interface" "on" \
 "imapd" "ipop3d/imapd remote mail access daemons" "on" \
 "inetd" "Internet super server daemon" "on" \
 "iproute2" "Kernel routing and traffic control" "on" \
@@ -53,14 +57,6 @@ Press ENTER when you are done." \
 "ipw2200-fw" "Firmware for Intel ipw2200 wireless." "on" \
 "irssi" "IRSSI Internet Relay Chat (IRC) client" "on" \
 "iw" "Utility for mac80211 based wireless devices" "on" \
-"iwlwifi-100-ucode" "Microcode for Intel Centrino N 100 wireless" "on" \
-"iwlwifi-1000-ucode" "Microcode for Intel 1000 wireless chips" "on" \
-"iwlwifi-3945-ucode" "Microcode for Intel 3945 wireless chips" "on" \
-"iwlwifi-4965-ucode" "Microcode for Intel 4965 wireless chips" "on" \
-"iwlwifi-5000-ucode" "Microcode for Intel 5000 wireless chips" "on" \
-"iwlwifi-5150-ucode" "Microcode for Intel 5150 wireless chips" "on" \
-"iwlwifi-6000-ucode" "Microcode for Intel 6000 wireless chips" "on" \
-"iwlwifi-6xxx-ucode" "Microcode for Intel 6XXX wireless chips" "on" \
 "lftp" "Shell-like FTP and HTTP transfer program" "on" \
 "libassuan" "Interprocess Communication Library for GPG" "on" \
 "libgcrypt" "General purpose crypto library" "on" \
@@ -71,6 +67,7 @@ Press ENTER when you are done." \
 "mailx" "A simple user mail program" "on" \
 "mcabber" "Jabber messaging client for the console" "on" \
 "metamail" "Metamail multimedia mail extensions" "on" \
+"mobile-broadband-provider-info" "mobile broadband provider settings" "on" \
 "mtr" "Network diagnosic tool" "on" \
 "mutt" "The Mutt E-Mail Client" "on" \
 "nc" "Netcat network utility" "on" \
@@ -89,6 +86,7 @@ Press ENTER when you are done." \
 "netkit-rwho" "See information about users on the local net" "on" \
 "netkit-timed" "BSD time server daemon" "on" \
 "netpipes" "Network pipe utilities" "on" \
+"nettle" "Cryptographic library" "on" \
 "netwatch" "Another network monitoring program" "on" \
 "network-scripts" "Scripts required for networking on Slackware" "on" \
 "netwrite" "Write to users on a remote machine" "on" \
@@ -105,6 +103,7 @@ Press ENTER when you are done." \
 "openssh" "OpenSSH Secure Shell" "on" \
 "openssl" "OpenSSL Secure Sockets Layer toolkit" "on" \
 "openvpn" "Secure IP VPN tunnel daemon" "on" \
+"p11-kit" "PKCS 11 public key toolkit" "on" \
 "php" "PHP scripting language for Apache" "on" \
 "pidentd" "TCP/IP IDENT protocol server" "on" \
 "pinentry" "PIN Entry dialogs" "on" \
@@ -119,10 +118,6 @@ Press ENTER when you are done." \
 "rfkill" "tool to query wireless interfaces" "on" \
 "rp-pppoe" "Connect to ADSL ISPs that use PPPoE" "on" \
 "rsync" "Enhanced replacement for rcp" "on" \
-"rt2860-firmware" "Firmware for rt2860 PCI wireless cards." "on" \
-"rt2870-firmware" "Firmware for rt2870 USB wireless cards." "on" \
-"rt61-firmware" "Firmware for rt61 wireless cards." "on" \
-"rt71w-firmware" "Firmware for rt71w wireless cards." "on" \
 "samba" "SMB print/file server for Windows LANs" "on" \
 "sendmail" "The sendmail mail transport agent" "on" \
 "sendmail-cf" "Extra configuration files for sendmail" "on" \
@@ -151,7 +146,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-100-ucode iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode iwlwifi-6xxx-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
+ModemManager NetworkManager alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates cifs-utils crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit iftop imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mobile-broadband-provider-info mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes nettle netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn p11-kit php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -159,7 +154,7 @@ alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-u
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-100-ucode iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode iwlwifi-6xxx-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
+ModemManager NetworkManager alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger ca-certificates cifs-utils crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo idnkit iftop imapd inetd iproute2 iptables iptraf-ng iputils ipw2100-fw ipw2200-fw irssi iw lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mobile-broadband-provider-info mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes nettle netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn p11-kit php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rfkill rp-pppoe rsync samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/n/tagfile b/slackware64/n/tagfile
index 587eecb7..945ecbe6 100644
--- a/slackware64/n/tagfile
+++ b/slackware64/n/tagfile
@@ -1,3 +1,5 @@
+ModemManager:REC
+NetworkManager:REC
 alpine:OPT
 autofs:OPT
 biff+comsat:OPT
@@ -9,6 +11,7 @@ bootp:OPT
 bridge-utils:OPT
 bsd-finger:OPT
 ca-certificates:REC
+cifs-utils:OPT
 crda:REC
 curl:OPT
 cyrus-sasl:REC
@@ -30,24 +33,17 @@ htdig:OPT
 httpd:OPT
 icmpinfo:OPT
 idnkit:REC
+iftop:REC
 imapd:OPT
 inetd:REC
 iproute2:OPT
 iptables:ADD
 iptraf-ng:OPT
-iputils:OPT
+iputils:ADD
 ipw2100-fw:ADD
 ipw2200-fw:ADD
 irssi:OPT
 iw:REC
-iwlwifi-100-ucode:ADD
-iwlwifi-1000-ucode:ADD
-iwlwifi-3945-ucode:ADD
-iwlwifi-4965-ucode:ADD
-iwlwifi-5000-ucode:ADD
-iwlwifi-5150-ucode:ADD
-iwlwifi-6000-ucode:ADD
-iwlwifi-6xxx-ucode:ADD
 lftp:OPT
 libassuan:REC
 libgcrypt:REC
@@ -58,12 +54,13 @@ lynx:OPT
 mailx:REC
 mcabber:OPT
 metamail:REC
+mobile-broadband-provider-info:REC
 mtr:OPT
 mutt:OPT
 nc:OPT
 ncftp:OPT
 net-snmp:REC
-net-tools:OPT
+net-tools:ADD
 netatalk:OPT
 netdate:OPT
 netkit-bootparamd:OPT
@@ -76,6 +73,7 @@ netkit-rwall:OPT
 netkit-rwho:OPT
 netkit-timed:OPT
 netpipes:OPT
+nettle:REC
 netwatch:OPT
 network-scripts:ADD
 netwrite:OPT
@@ -92,6 +90,7 @@ openobex:REC
 openssh:REC
 openssl:REC
 openvpn:OPT
+p11-kit:REC
 php:OPT
 pidentd:REC
 pinentry:REC
@@ -106,10 +105,6 @@ rdist:OPT
 rfkill:REC
 rp-pppoe:OPT
 rsync:OPT
-rt2860-firmware:ADD
-rt2870-firmware:ADD
-rt61-firmware:ADD
-rt71w-firmware:ADD
 samba:OPT
 sendmail:REC
 sendmail-cf:OPT
diff --git a/slackware64/x/maketag b/slackware64/x/maketag
index c280295d..f91f042c 100644
--- a/slackware64/x/maketag
+++ b/slackware64/x/maketag
@@ -68,6 +68,7 @@ Press ENTER when you are done." \
 "fontconfig" "Font configuration library" "on" \
 "fontsproto" "Prototype files (.h, .pc) for X" "on" \
 "fonttosfnt" "Wraps a bitmap font in a TrueType wrapper" "on" \
+"freeglut" "A free alternative to the GLUT library" "on" \
 "fslsfonts" "list fonts served by X font server" "on" \
 "fstobdf" "Generate BDF font from X font server" "on" \
 "gccmakedep" "create dependencies in makefiles with gcc -M" "on" \
@@ -86,6 +87,8 @@ Press ENTER when you are done." \
 "libXScrnSaver" "libXScrnSaver is a library for X" "on" \
 "libXau" "libXau is a library for X" "on" \
 "libXaw" "libXaw is a library for X" "on" \
+"libXaw3d" "Athena X widgets with a 3D look" "on" \
+"libXcm" "X net-color library" "on" \
 "libXcomposite" "libXcomposite is a library for X" "on" \
 "libXcursor" "libXcursor is a library for X" "on" \
 "libXdamage" "libXdamage is a library for X" "on" \
@@ -129,10 +132,10 @@ Press ENTER when you are done." \
 "mkcomposecache" "create a cache file for a compose file" "on" \
 "mkfontdir" "create an index of X font files in a directory" "on" \
 "mkfontscale" "create an index of scalable font files for X" "on" \
+"mtdev" "Multitouch support library" "on" \
 "oclock" "A clock widget for the X desktop" "on" \
 "pixman" "Low-level pixel manipulation library" "on" \
 "printproto" "Prototype files (.h, .pc) for X" "on" \
-"radeon_ucode" "Microcode for some Radeon graphics cards" "on" \
 "randrproto" "Prototype files (.h, .pc) for X" "on" \
 "recordproto" "Prototype files (.h, .pc) for X" "on" \
 "rendercheck" "simple tests of the X Render extension" "on" \
@@ -148,7 +151,6 @@ Press ENTER when you are done." \
 "scim-m17n" "SCIM bridge support for m17n input" "on" \
 "scim-pinyin" "smart pinyin IM engine" "on" \
 "scim-tables" "CJK tables IMEngine for scim" "on" \
-"scripts" "miscellaneous scripts for X" "on" \
 "scrnsaverproto" "Prototype files (.h, .pc) for X" "on" \
 "sessreg" "manage utmp/wtmp entries for non-init clients" "on" \
 "setxkbmap" "set the keyboard with the X Keyboard Extension" "on" \
@@ -156,6 +158,7 @@ Press ENTER when you are done." \
 "sinhala_lklug-font-ttf" "Sinhala Unicode TrueType font" "on" \
 "smproxy" "Session Manager Proxy" "on" \
 "tibmachuni-font-ttf" "Tibetan Machine Unicode font" "on" \
+"transset" "Utility for setting X opacity property" "on" \
 "ttf-indic-fonts" "Indic script TrueType fonts" "on" \
 "twm" "TWM window manager" "on" \
 "util-macros" "m4 macros needed by X" "on" \
@@ -165,13 +168,16 @@ Press ENTER when you are done." \
 "x11-skel" "Some directories and links needed by X11" "on" \
 "x11perf" "X11 server performance test program" "on" \
 "xauth" "X authority file utility" "on" \
-"xaw3d" "A more 3-D looking version of libXaw" "on" \
 "xbacklight" "Adjust backlight brightness in X" "on" \
 "xbiff" "mailbox flag for X" "on" \
 "xbitmaps" "various bitmaps used by X" "on" \
 "xcalc" "A calculator program for X" "on" \
 "xcb-proto" "Prototype files (.h, .pc) for X" "on" \
 "xcb-util" "Utilities for XCB" "on" \
+"xcb-util-image" "XCB library providing XImage and XShmImage" "on" \
+"xcb-util-keysyms" "XCB keysyms library " "on" \
+"xcb-util-renderutil" "XCB renderutil library" "on" \
+"xcb-util-wm" "XCB libraries for EWMH and ICCCM" "on" \
 "xclipboard" "X clipboard client" "on" \
 "xclock" "A desktop clock program for X" "on" \
 "xcmiscproto" "Prototype files (.h, .pc) for X" "on" \
@@ -215,28 +221,25 @@ Press ENTER when you are done." \
 "xf86-video-intel" "intel video driver for X" "on" \
 "xf86-video-mach64" "ATI Mach64 video driver for X" "on" \
 "xf86-video-mga" "mga video driver for X" "on" \
+"xf86-video-modesetting" "fallback video driver for X11 using KMS" "on" \
 "xf86-video-neomagic" "neomagic video driver for X" "on" \
 "xf86-video-nouveau" "blacklist the experimental nouveau driver" "on" \
 "xf86-video-nv" "nv video driver for X" "on" \
 "xf86-video-openchrome" "VIA UniChrome video driver for X" "on" \
 "xf86-video-r128" "ATI Rage128 video driver for X" "on" \
-"xf86-video-radeonhd" "radeonhd video driver for X" "on" \
 "xf86-video-rendition" "rendition video driver for X" "on" \
 "xf86-video-s3" "s3 video driver for X" "on" \
 "xf86-video-s3virge" "s3virge video driver for X" "on" \
 "xf86-video-savage" "savage video driver for X" "on" \
 "xf86-video-siliconmotion" "siliconmotion video driver for X" "on" \
 "xf86-video-sis" "sis video driver for X" "on" \
-"xf86-video-sisusb" "sisusb video driver for X" "on" \
 "xf86-video-tdfx" "tdfx video driver for X" "on" \
 "xf86-video-tga" "tga video driver for X" "on" \
 "xf86-video-trident" "trident video driver for X" "on" \
-"xf86-video-tseng" "tseng video driver for X" "on" \
 "xf86-video-v4l" "v4l video driver for X" "on" \
 "xf86-video-vesa" "vesa video driver for X" "on" \
 "xf86-video-vmware" "vmware video driver for X" "on" \
 "xf86-video-voodoo" "voodoo video driver for X" "on" \
-"xf86-video-xgi" "xgi video driver for X" "on" \
 "xf86bigfontproto" "Prototype files (.h, .pc) for X" "on" \
 "xf86dga" "test program for the XFree86-DGA extension" "on" \
 "xf86dgaproto" "Prototype files (.h, .pc) for X" "on" \
@@ -301,7 +304,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto radeon_ucode randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
+anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt freeglut fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXaw3d libXcm libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale mtdev oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf transset ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xcb-util-image xcb-util-keysyms xcb-util-renderutil xcb-util-wm xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-modesetting xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -309,7 +312,7 @@ anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto dama
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto radeon_ucode randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
+anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt freeglut fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXaw3d libXcm libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale mtdev oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf transset ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xcb-util-image xcb-util-keysyms xcb-util-renderutil xcb-util-wm xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-modesetting xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/x/maketag.ez b/slackware64/x/maketag.ez
index c280295d..f91f042c 100644
--- a/slackware64/x/maketag.ez
+++ b/slackware64/x/maketag.ez
@@ -68,6 +68,7 @@ Press ENTER when you are done." \
 "fontconfig" "Font configuration library" "on" \
 "fontsproto" "Prototype files (.h, .pc) for X" "on" \
 "fonttosfnt" "Wraps a bitmap font in a TrueType wrapper" "on" \
+"freeglut" "A free alternative to the GLUT library" "on" \
 "fslsfonts" "list fonts served by X font server" "on" \
 "fstobdf" "Generate BDF font from X font server" "on" \
 "gccmakedep" "create dependencies in makefiles with gcc -M" "on" \
@@ -86,6 +87,8 @@ Press ENTER when you are done." \
 "libXScrnSaver" "libXScrnSaver is a library for X" "on" \
 "libXau" "libXau is a library for X" "on" \
 "libXaw" "libXaw is a library for X" "on" \
+"libXaw3d" "Athena X widgets with a 3D look" "on" \
+"libXcm" "X net-color library" "on" \
 "libXcomposite" "libXcomposite is a library for X" "on" \
 "libXcursor" "libXcursor is a library for X" "on" \
 "libXdamage" "libXdamage is a library for X" "on" \
@@ -129,10 +132,10 @@ Press ENTER when you are done." \
 "mkcomposecache" "create a cache file for a compose file" "on" \
 "mkfontdir" "create an index of X font files in a directory" "on" \
 "mkfontscale" "create an index of scalable font files for X" "on" \
+"mtdev" "Multitouch support library" "on" \
 "oclock" "A clock widget for the X desktop" "on" \
 "pixman" "Low-level pixel manipulation library" "on" \
 "printproto" "Prototype files (.h, .pc) for X" "on" \
-"radeon_ucode" "Microcode for some Radeon graphics cards" "on" \
 "randrproto" "Prototype files (.h, .pc) for X" "on" \
 "recordproto" "Prototype files (.h, .pc) for X" "on" \
 "rendercheck" "simple tests of the X Render extension" "on" \
@@ -148,7 +151,6 @@ Press ENTER when you are done." \
 "scim-m17n" "SCIM bridge support for m17n input" "on" \
 "scim-pinyin" "smart pinyin IM engine" "on" \
 "scim-tables" "CJK tables IMEngine for scim" "on" \
-"scripts" "miscellaneous scripts for X" "on" \
 "scrnsaverproto" "Prototype files (.h, .pc) for X" "on" \
 "sessreg" "manage utmp/wtmp entries for non-init clients" "on" \
 "setxkbmap" "set the keyboard with the X Keyboard Extension" "on" \
@@ -156,6 +158,7 @@ Press ENTER when you are done." \
 "sinhala_lklug-font-ttf" "Sinhala Unicode TrueType font" "on" \
 "smproxy" "Session Manager Proxy" "on" \
 "tibmachuni-font-ttf" "Tibetan Machine Unicode font" "on" \
+"transset" "Utility for setting X opacity property" "on" \
 "ttf-indic-fonts" "Indic script TrueType fonts" "on" \
 "twm" "TWM window manager" "on" \
 "util-macros" "m4 macros needed by X" "on" \
@@ -165,13 +168,16 @@ Press ENTER when you are done." \
 "x11-skel" "Some directories and links needed by X11" "on" \
 "x11perf" "X11 server performance test program" "on" \
 "xauth" "X authority file utility" "on" \
-"xaw3d" "A more 3-D looking version of libXaw" "on" \
 "xbacklight" "Adjust backlight brightness in X" "on" \
 "xbiff" "mailbox flag for X" "on" \
 "xbitmaps" "various bitmaps used by X" "on" \
 "xcalc" "A calculator program for X" "on" \
 "xcb-proto" "Prototype files (.h, .pc) for X" "on" \
 "xcb-util" "Utilities for XCB" "on" \
+"xcb-util-image" "XCB library providing XImage and XShmImage" "on" \
+"xcb-util-keysyms" "XCB keysyms library " "on" \
+"xcb-util-renderutil" "XCB renderutil library" "on" \
+"xcb-util-wm" "XCB libraries for EWMH and ICCCM" "on" \
 "xclipboard" "X clipboard client" "on" \
 "xclock" "A desktop clock program for X" "on" \
 "xcmiscproto" "Prototype files (.h, .pc) for X" "on" \
@@ -215,28 +221,25 @@ Press ENTER when you are done." \
 "xf86-video-intel" "intel video driver for X" "on" \
 "xf86-video-mach64" "ATI Mach64 video driver for X" "on" \
 "xf86-video-mga" "mga video driver for X" "on" \
+"xf86-video-modesetting" "fallback video driver for X11 using KMS" "on" \
 "xf86-video-neomagic" "neomagic video driver for X" "on" \
 "xf86-video-nouveau" "blacklist the experimental nouveau driver" "on" \
 "xf86-video-nv" "nv video driver for X" "on" \
 "xf86-video-openchrome" "VIA UniChrome video driver for X" "on" \
 "xf86-video-r128" "ATI Rage128 video driver for X" "on" \
-"xf86-video-radeonhd" "radeonhd video driver for X" "on" \
 "xf86-video-rendition" "rendition video driver for X" "on" \
 "xf86-video-s3" "s3 video driver for X" "on" \
 "xf86-video-s3virge" "s3virge video driver for X" "on" \
 "xf86-video-savage" "savage video driver for X" "on" \
 "xf86-video-siliconmotion" "siliconmotion video driver for X" "on" \
 "xf86-video-sis" "sis video driver for X" "on" \
-"xf86-video-sisusb" "sisusb video driver for X" "on" \
 "xf86-video-tdfx" "tdfx video driver for X" "on" \
 "xf86-video-tga" "tga video driver for X" "on" \
 "xf86-video-trident" "trident video driver for X" "on" \
-"xf86-video-tseng" "tseng video driver for X" "on" \
 "xf86-video-v4l" "v4l video driver for X" "on" \
 "xf86-video-vesa" "vesa video driver for X" "on" \
 "xf86-video-vmware" "vmware video driver for X" "on" \
 "xf86-video-voodoo" "voodoo video driver for X" "on" \
-"xf86-video-xgi" "xgi video driver for X" "on" \
 "xf86bigfontproto" "Prototype files (.h, .pc) for X" "on" \
 "xf86dga" "test program for the XFree86-DGA extension" "on" \
 "xf86dgaproto" "Prototype files (.h, .pc) for X" "on" \
@@ -301,7 +304,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto radeon_ucode randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
+anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt freeglut fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXaw3d libXcm libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale mtdev oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf transset ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xcb-util-image xcb-util-keysyms xcb-util-renderutil xcb-util-wm xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-modesetting xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -309,7 +312,7 @@ anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto dama
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto radeon_ucode randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
+anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt freeglut fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXau libXaw libXaw3d libXcm libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale mtdev oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf transset ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xcb-util-image xcb-util-keysyms xcb-util-renderutil xcb-util-wm xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-user-dirs xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-modesetting xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86vidmodeproto xfd xfontsel xfs xfsinfo xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xpr xprop xproto xpyb xrandr xrdb xrefresh xscope xset xsetroot xsm xstdcmap xterm xtrans xvidtune xvinfo xwd xwininfo xwud \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/x/tagfile b/slackware64/x/tagfile
index c4fd74c8..dc3c1e85 100644
--- a/slackware64/x/tagfile
+++ b/slackware64/x/tagfile
@@ -55,6 +55,7 @@ fontcacheproto:REC
 fontconfig:ADD
 fontsproto:REC
 fonttosfnt:REC
+freeglut:REC
 fslsfonts:REC
 fstobdf:REC
 gccmakedep:REC
@@ -73,6 +74,8 @@ libX11:REC
 libXScrnSaver:REC
 libXau:REC
 libXaw:REC
+libXaw3d:REC
+libXcm:REC
 libXcomposite:REC
 libXcursor:REC
 libXdamage:REC
@@ -116,10 +119,10 @@ mesa:REC
 mkcomposecache:REC
 mkfontdir:REC
 mkfontscale:REC
+mtdev:REC
 oclock:REC
 pixman:REC
 printproto:REC
-radeon_ucode:ADD
 randrproto:REC
 recordproto:REC
 rendercheck:REC
@@ -135,7 +138,6 @@ scim-input-pad:REC
 scim-m17n:REC
 scim-pinyin:REC
 scim-tables:REC
-scripts:REC
 scrnsaverproto:REC
 sessreg:REC
 setxkbmap:REC
@@ -143,6 +145,7 @@ showfont:REC
 sinhala_lklug-font-ttf:REC
 smproxy:REC
 tibmachuni-font-ttf:REC
+transset:REC
 ttf-indic-fonts:REC
 twm:REC
 util-macros:REC
@@ -152,13 +155,16 @@ wqy-zenhei-font-ttf:REC
 x11-skel:REC
 x11perf:REC
 xauth:REC
-xaw3d:REC
 xbacklight:REC
 xbiff:REC
 xbitmaps:REC
 xcalc:REC
 xcb-proto:REC
 xcb-util:ADD
+xcb-util-image:REC
+xcb-util-keysyms:REC
+xcb-util-renderutil:REC
+xcb-util-wm:REC
 xclipboard:REC
 xclock:REC
 xcmiscproto:REC
@@ -202,28 +208,25 @@ xf86-video-i740:REC
 xf86-video-intel:REC
 xf86-video-mach64:REC
 xf86-video-mga:REC
+xf86-video-modesetting:REC
 xf86-video-neomagic:REC
 xf86-video-nouveau:REC
 xf86-video-nv:REC
 xf86-video-openchrome:REC
 xf86-video-r128:REC
-xf86-video-radeonhd:REC
 xf86-video-rendition:REC
 xf86-video-s3:REC
 xf86-video-s3virge:REC
 xf86-video-savage:REC
 xf86-video-siliconmotion:REC
 xf86-video-sis:REC
-xf86-video-sisusb:REC
 xf86-video-tdfx:REC
 xf86-video-tga:REC
 xf86-video-trident:REC
-xf86-video-tseng:REC
 xf86-video-v4l:REC
 xf86-video-vesa:REC
 xf86-video-vmware:REC
 xf86-video-voodoo:REC
-xf86-video-xgi:REC
 xf86bigfontproto:REC
 xf86dga:REC
 xf86dgaproto:REC
diff --git a/slackware64/xap/maketag b/slackware64/xap/maketag
index ec23d5d8..d04e5dab 100644
--- a/slackware64/xap/maketag
+++ b/slackware64/xap/maketag
@@ -30,6 +30,7 @@ Press ENTER when you are done." \
 "imagemagick" "ImageMagick image utilities" "on" \
 "mozilla-firefox" "Mozilla Firefox web browser" "on" \
 "mozilla-thunderbird" "Mozilla Thunderbird email client" "on" \
+"network-manager-applet" "NetworkManager Applet" "on" \
 "pan" "Pan newsreader (good for Reading News)" "on" \
 "pidgin" "GTK+ based messaging program" "on" \
 "rdesktop" "Remote Desktop Protocol client" "on" \
@@ -37,16 +38,12 @@ Press ENTER when you are done." \
 "sane" "Scanner Access Now Easy" "on" \
 "seamonkey" "SeaMonkey Application Suite" "on" \
 "seyon" "A complete telecommunications package" "on" \
-"thunar-volman" "Thunar Volume Manager for Xfce" "on" \
 "vim-gvim" "X/GTK+ GUI add-on for the VIM editor" "on" \
 "windowmaker" "GNU window manager for X" "on" \
 "x11-ssh-askpass" "X11-based SSH passphrase dialog" "on" \
 "x3270" "x3270 - IBM host access tool" "on" \
 "xaos" "Fast real-time fractal zoomer/viewer" "on" \
 "xchat" "IRC client for X" "on" \
-"xfce" "A lightweight desktop environment for X" "on" \
-"xfce4-notifyd" "xfce libnotify daemon" "on" \
-"xfce4-power-manager" "Power Management daemon for Xfce" "on" \
 "xfractint" "Fractint for X" "on" \
 "xgames" "A collection of games for X" "on" \
 "xine-lib" "Multimedia player libraries" "on" \
@@ -64,7 +61,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
+MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird network-manager-applet pan pidgin rdesktop rxvt sane seamonkey seyon vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -72,7 +69,7 @@ MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
+MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird network-manager-applet pan pidgin rdesktop rxvt sane seamonkey seyon vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/xap/maketag.ez b/slackware64/xap/maketag.ez
index ec23d5d8..d04e5dab 100644
--- a/slackware64/xap/maketag.ez
+++ b/slackware64/xap/maketag.ez
@@ -30,6 +30,7 @@ Press ENTER when you are done." \
 "imagemagick" "ImageMagick image utilities" "on" \
 "mozilla-firefox" "Mozilla Firefox web browser" "on" \
 "mozilla-thunderbird" "Mozilla Thunderbird email client" "on" \
+"network-manager-applet" "NetworkManager Applet" "on" \
 "pan" "Pan newsreader (good for Reading News)" "on" \
 "pidgin" "GTK+ based messaging program" "on" \
 "rdesktop" "Remote Desktop Protocol client" "on" \
@@ -37,16 +38,12 @@ Press ENTER when you are done." \
 "sane" "Scanner Access Now Easy" "on" \
 "seamonkey" "SeaMonkey Application Suite" "on" \
 "seyon" "A complete telecommunications package" "on" \
-"thunar-volman" "Thunar Volume Manager for Xfce" "on" \
 "vim-gvim" "X/GTK+ GUI add-on for the VIM editor" "on" \
 "windowmaker" "GNU window manager for X" "on" \
 "x11-ssh-askpass" "X11-based SSH passphrase dialog" "on" \
 "x3270" "x3270 - IBM host access tool" "on" \
 "xaos" "Fast real-time fractal zoomer/viewer" "on" \
 "xchat" "IRC client for X" "on" \
-"xfce" "A lightweight desktop environment for X" "on" \
-"xfce4-notifyd" "xfce libnotify daemon" "on" \
-"xfce4-power-manager" "Power Management daemon for Xfce" "on" \
 "xfractint" "Fractint for X" "on" \
 "xgames" "A collection of games for X" "on" \
 "xine-lib" "Multimedia player libraries" "on" \
@@ -64,7 +61,7 @@ if [ $? = 1 -o $? = 255 ]; then
  rm -f $TMP/SeTpkgs
  > $TMP/SeTnewtag
  for pkg in \
-MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
+MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird network-manager-applet pan pidgin rdesktop rxvt sane seamonkey seyon vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
   ; do
   echo "$pkg: SKP" >> $TMP/SeTnewtag
  done
@@ -72,7 +69,7 @@ MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm
 fi
 cat /dev/null > $TMP/SeTnewtag
 for PACKAGE in \
-MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
+MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv imagemagick mozilla-firefox mozilla-thunderbird network-manager-applet pan pidgin rdesktop rxvt sane seamonkey seyon vim-gvim windowmaker x11-ssh-askpass x3270 xaos xchat xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \
  ; do
  if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
   echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
diff --git a/slackware64/xap/tagfile b/slackware64/xap/tagfile
index d56c99d4..e8365120 100644
--- a/slackware64/xap/tagfile
+++ b/slackware64/xap/tagfile
@@ -17,6 +17,7 @@ gv:REC
 imagemagick:REC
 mozilla-firefox:REC
 mozilla-thunderbird:REC
+network-manager-applet:REC
 pan:REC
 pidgin:OPT
 rdesktop:OPT
@@ -24,16 +25,12 @@ rxvt:REC
 sane:OPT
 seamonkey:REC
 seyon:OPT
-thunar-volman:REC
 vim-gvim:REC
 windowmaker:REC
 x11-ssh-askpass:REC
 x3270:OPT
 xaos:OPT
 xchat:OPT
-xfce:OPT
-xfce4-notifyd:REC
-xfce4-power-manager:REC
 xfractint:OPT
 xgames:REC
 xine-lib:REC
diff --git a/slackware64/xfce/maketag b/slackware64/xfce/maketag
new file mode 100644
index 00000000..130c40d8
--- /dev/null
+++ b/slackware64/xfce/maketag
@@ -0,0 +1,64 @@
+#!/bin/sh
+#item   ####description                                      ###on off ###
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+cat /dev/null > $TMP/SeTnewtag
+dialog --title "SELECTING PACKAGES FROM SERIES XFCE (XFCE DESKTOP)" \
+       --checklist "Please confirm the packages you wish to install \
+from series XFCE.  Use the UP/DOWN keys to scroll through the list, and \
+the SPACE key to deselect any items you don't want to install.  \
+Press ENTER when you are done." \
+20 70 10 \
+"Terminal" "Xfce's Terminal Emulator" "on" \
+"Thunar" "Xfce file manager" "on" \
+"exo" "libexo extension library" "on" \
+"garcon" "menu implementation for Xfce" "on" \
+"gtk-xfce-engine" "Xfce Gtk+ engines" "on" \
+"libxfce4ui" "Xfce widget library" "on" \
+"libxfce4util" "basic utility library for Xfce" "on" \
+"libxfcegui4" "old Xfce widget library" "on" \
+"orage" "Xfce's calendar" "on" \
+"thunar-volman" "Thunar Volume Manager for Xfce" "on" \
+"tumbler" "thumbnail generator" "on" \
+"xfce4-appfinder" "Application finder" "on" \
+"xfce4-clipman-plugin" "clipman plugin for the Xfce panel" "on" \
+"xfce4-dev-tools" "Xfce development tools" "on" \
+"xfce4-mixer" "Sound mixer applet for Xfce" "on" \
+"xfce4-notifyd" "xfce libnotify daemon" "on" \
+"xfce4-panel" "panel for Xfce" "on" \
+"xfce4-power-manager" "Power Management daemon for Xfce" "on" \
+"xfce4-screenshooter" "screenshooter plugin for Xfce" "on" \
+"xfce4-session" "Xfce session manager" "on" \
+"xfce4-settings" "Xfce settings manager" "on" \
+"xfce4-systemload-plugin" "systemload plugin for the Xfce panel" "on" \
+"xfce4-taskmanager" "running apps / task manager application" "on" \
+"xfce4-volumed" "audio volume management daemon" "on" \
+"xfce4-weather-plugin" "weather plugin for the Xfce panel" "on" \
+"xfconf" "Xfce configuration storage system" "on" \
+"xfdesktop" "Xfce desktop manager" "on" \
+"xfwm4" "Xfce Window Manager" "on" \
+"xfwm4-themes" "themes for the Xfce window manager" "on" \
+2> $TMP/SeTpkgs
+if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTpkgs
+ > $TMP/SeTnewtag
+ for pkg in \
+Terminal Thunar exo garcon gtk-xfce-engine libxfce4ui libxfce4util libxfcegui4 orage thunar-volman tumbler xfce4-appfinder xfce4-clipman-plugin xfce4-dev-tools xfce4-mixer xfce4-notifyd xfce4-panel xfce4-power-manager xfce4-screenshooter xfce4-session xfce4-settings xfce4-systemload-plugin xfce4-taskmanager xfce4-volumed xfce4-weather-plugin xfconf xfdesktop xfwm4 xfwm4-themes \
+  ; do
+  echo "$pkg: SKP" >> $TMP/SeTnewtag
+ done
+ exit
+fi
+cat /dev/null > $TMP/SeTnewtag
+for PACKAGE in \
+Terminal Thunar exo garcon gtk-xfce-engine libxfce4ui libxfce4util libxfcegui4 orage thunar-volman tumbler xfce4-appfinder xfce4-clipman-plugin xfce4-dev-tools xfce4-mixer xfce4-notifyd xfce4-panel xfce4-power-manager xfce4-screenshooter xfce4-session xfce4-settings xfce4-systemload-plugin xfce4-taskmanager xfce4-volumed xfce4-weather-plugin xfconf xfdesktop xfwm4 xfwm4-themes \
+ ; do
+ if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
+  echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
+ else
+  echo "$PACKAGE: SKP" >> $TMP/SeTnewtag
+ fi
+done
+rm -f $TMP/SeTpkgs
diff --git a/slackware64/xfce/maketag.ez b/slackware64/xfce/maketag.ez
new file mode 100644
index 00000000..130c40d8
--- /dev/null
+++ b/slackware64/xfce/maketag.ez
@@ -0,0 +1,64 @@
+#!/bin/sh
+#item   ####description                                      ###on off ###
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+cat /dev/null > $TMP/SeTnewtag
+dialog --title "SELECTING PACKAGES FROM SERIES XFCE (XFCE DESKTOP)" \
+       --checklist "Please confirm the packages you wish to install \
+from series XFCE.  Use the UP/DOWN keys to scroll through the list, and \
+the SPACE key to deselect any items you don't want to install.  \
+Press ENTER when you are done." \
+20 70 10 \
+"Terminal" "Xfce's Terminal Emulator" "on" \
+"Thunar" "Xfce file manager" "on" \
+"exo" "libexo extension library" "on" \
+"garcon" "menu implementation for Xfce" "on" \
+"gtk-xfce-engine" "Xfce Gtk+ engines" "on" \
+"libxfce4ui" "Xfce widget library" "on" \
+"libxfce4util" "basic utility library for Xfce" "on" \
+"libxfcegui4" "old Xfce widget library" "on" \
+"orage" "Xfce's calendar" "on" \
+"thunar-volman" "Thunar Volume Manager for Xfce" "on" \
+"tumbler" "thumbnail generator" "on" \
+"xfce4-appfinder" "Application finder" "on" \
+"xfce4-clipman-plugin" "clipman plugin for the Xfce panel" "on" \
+"xfce4-dev-tools" "Xfce development tools" "on" \
+"xfce4-mixer" "Sound mixer applet for Xfce" "on" \
+"xfce4-notifyd" "xfce libnotify daemon" "on" \
+"xfce4-panel" "panel for Xfce" "on" \
+"xfce4-power-manager" "Power Management daemon for Xfce" "on" \
+"xfce4-screenshooter" "screenshooter plugin for Xfce" "on" \
+"xfce4-session" "Xfce session manager" "on" \
+"xfce4-settings" "Xfce settings manager" "on" \
+"xfce4-systemload-plugin" "systemload plugin for the Xfce panel" "on" \
+"xfce4-taskmanager" "running apps / task manager application" "on" \
+"xfce4-volumed" "audio volume management daemon" "on" \
+"xfce4-weather-plugin" "weather plugin for the Xfce panel" "on" \
+"xfconf" "Xfce configuration storage system" "on" \
+"xfdesktop" "Xfce desktop manager" "on" \
+"xfwm4" "Xfce Window Manager" "on" \
+"xfwm4-themes" "themes for the Xfce window manager" "on" \
+2> $TMP/SeTpkgs
+if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTpkgs
+ > $TMP/SeTnewtag
+ for pkg in \
+Terminal Thunar exo garcon gtk-xfce-engine libxfce4ui libxfce4util libxfcegui4 orage thunar-volman tumbler xfce4-appfinder xfce4-clipman-plugin xfce4-dev-tools xfce4-mixer xfce4-notifyd xfce4-panel xfce4-power-manager xfce4-screenshooter xfce4-session xfce4-settings xfce4-systemload-plugin xfce4-taskmanager xfce4-volumed xfce4-weather-plugin xfconf xfdesktop xfwm4 xfwm4-themes \
+  ; do
+  echo "$pkg: SKP" >> $TMP/SeTnewtag
+ done
+ exit
+fi
+cat /dev/null > $TMP/SeTnewtag
+for PACKAGE in \
+Terminal Thunar exo garcon gtk-xfce-engine libxfce4ui libxfce4util libxfcegui4 orage thunar-volman tumbler xfce4-appfinder xfce4-clipman-plugin xfce4-dev-tools xfce4-mixer xfce4-notifyd xfce4-panel xfce4-power-manager xfce4-screenshooter xfce4-session xfce4-settings xfce4-systemload-plugin xfce4-taskmanager xfce4-volumed xfce4-weather-plugin xfconf xfdesktop xfwm4 xfwm4-themes \
+ ; do
+ if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then
+  echo "$PACKAGE: ADD" >> $TMP/SeTnewtag
+ else
+  echo "$PACKAGE: SKP" >> $TMP/SeTnewtag
+ fi
+done
+rm -f $TMP/SeTpkgs
diff --git a/slackware64/xfce/tagfile b/slackware64/xfce/tagfile
new file mode 100644
index 00000000..34cbce21
--- /dev/null
+++ b/slackware64/xfce/tagfile
@@ -0,0 +1,29 @@
+Terminal:REC
+Thunar:REC
+exo:REC
+garcon:REC
+gtk-xfce-engine:REC
+libxfce4ui:REC
+libxfce4util:REC
+libxfcegui4:REC
+orage:REC
+thunar-volman:REC
+tumbler:REC
+xfce4-appfinder:REC
+xfce4-clipman-plugin:REC
+xfce4-dev-tools:REC
+xfce4-mixer:REC
+xfce4-notifyd:REC
+xfce4-panel:REC
+xfce4-power-manager:REC
+xfce4-screenshooter:REC
+xfce4-session:REC
+xfce4-settings:REC
+xfce4-systemload-plugin:REC
+xfce4-taskmanager:REC
+xfce4-volumed:REC
+xfce4-weather-plugin:REC
+xfconf:REC
+xfdesktop:REC
+xfwm4:REC
+xfwm4-themes:REC
diff --git a/source/README.TXT b/source/README.TXT
new file mode 100644
index 00000000..404c6de0
--- /dev/null
+++ b/source/README.TXT
@@ -0,0 +1,36 @@
+

+This is the source used for Slackware.

+

+To look for a particular bit of source (let's say for 'cp'), first you would

+look for the full path:

+

+fuzzy:~# which cp

+/bin/cp

+

+Then, you grep for the package it came from. Note that the leading '/'

+is removed:

+

+fuzzy:~# grep bin/cp /var/log/packages/*

+/var/log/packages/cpio-2.4.2.91-i386-1:bin/cpio

+/var/log/packages/fileutils-4.1-i386-2:bin/cp

+/var/log/packages/gcc-2.95.3-i386-2:usr/bin/cpp

+/var/log/packages/gnome-applets-1.4.0.5-i386-1:usr/bin/cpumemusage_applet

+

+

+From this, you can see that 'cp' came from the fileutils-4.1-i386-2 package.

+The source will be found in a corresponding subdirectory.  In this case, that

+would be ./a/bin.   Don't be fooled into thinking that the _bin.tar.gz in this

+directory is the package with the source code -- anything starting with '_' is

+just a framework package full of empty files with the correct permissions and 

+ownerships for the completed package to use.

+

+Many of these packages now have scripts that untar, patch, and compile the

+source automatically.  These are the 'SlackBuild' scripts.  Moving back to the

+example above, you can figure out which package the bin/cp source came from by

+examining the SlackBuild script.

+

+Have fun!

+

+---

+Patrick J. Volkerding

+volkerdi@slackware.com

diff --git a/source/a/aaa_base/aaa_base.SlackBuild b/source/a/aaa_base/aaa_base.SlackBuild
index 29759144..b41e9545 100755
--- a/source/a/aaa_base/aaa_base.SlackBuild
+++ b/source/a/aaa_base/aaa_base.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,8 +20,8 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=13.37
-BUILD=${BUILD:-3}
+VERSION=14.0
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -37,6 +37,7 @@ CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-aaa_base
 
+rm -rf $PKG
 mkdir -p $TMP $PKG
 
 # Explode the package framework:
@@ -51,6 +52,9 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 cp -a $CWD/slackware-version $PKG/etc/slackware-version
 chown root:root $PKG/etc/slackware-version
 chmod 644 $PKG/etc/slackware-version
+cp -a $CWD/os-release $PKG/etc/os-release
+chown root:root $PKG/etc/os-release
+chmod 644 $PKG/etc/os-release
 
 # Add lib64 directories on x86_64:
 if [ "$ARCH" = "x86_64" ]; then
diff --git a/source/a/aaa_base/os-release b/source/a/aaa_base/os-release
new file mode 100644
index 00000000..717dbbf8
--- /dev/null
+++ b/source/a/aaa_base/os-release
@@ -0,0 +1,10 @@
+NAME=Slackware
+VERSION="14.0"
+ID=slackware
+VERSION_ID=14.0
+PRETTY_NAME="Slackware 14.0"
+ANSI_COLOR="0;34"
+CPE_NAME="cpe:/o:slackware:slackware_linux:14.0"
+HOME_URL="http://slackware.com/"
+SUPPORT_URL="http://www.linuxquestions.org/questions/slackware-14/"
+BUG_REPORT_URL="http://www.linuxquestions.org/questions/slackware-14/"
diff --git a/source/a/aaa_base/slackware-version b/source/a/aaa_base/slackware-version
index 9f526a9a..bd93610e 100644
--- a/source/a/aaa_base/slackware-version
+++ b/source/a/aaa_base/slackware-version
@@ -1 +1 @@
-Slackware 13.37.0
+Slackware 14.0
diff --git a/source/a/aaa_elflibs/aaa_elflibs.SlackBuild b/source/a/aaa_elflibs/aaa_elflibs.SlackBuild
index 09c181ef..20a343d2 100755
--- a/source/a/aaa_elflibs/aaa_elflibs.SlackBuild
+++ b/source/a/aaa_elflibs/aaa_elflibs.SlackBuild
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 
 
 PKGNAM=aaa_elflibs
-VERSION=${VERSION:-13.37}
-BUILD=${BUILD:-7}
+VERSION=${VERSION:-14.0}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/a/aaa_elflibs/symlinks-to-tracked-libs b/source/a/aaa_elflibs/symlinks-to-tracked-libs
index ab5ec3d7..38a44e9e 100644
--- a/source/a/aaa_elflibs/symlinks-to-tracked-libs
+++ b/source/a/aaa_elflibs/symlinks-to-tracked-libs
@@ -6,12 +6,13 @@
 /lib/libdm.so.0
 /lib/libfuse.so.2
 /lib/libgpm.so.1
-/lib/liblzma.so.0
+/lib/liblzma.so.5
 /lib/libncurses.so.5
 /lib/libncursesw.so.5
 /lib/libpopt.so.0
 /lib/libsysfs.so.2
 /lib/libtermcap.so.2
+/lib/libz.so.1
 /usr/lib/libasound.so.2
 /usr/lib/libcurl.so.2
 /usr/lib/libcurl.so.3
@@ -32,14 +33,11 @@
 /usr/lib/libgmpxx.so.4
 /usr/lib/libgobject-2.0.so.0
 /usr/lib/libgthread-2.0.so.0
-/usr/lib/libhistory.so.4
 /usr/lib/libhistory.so.5
 /usr/lib/libidn.so.11
 /usr/lib/libjpeg.so.62
 /usr/lib/libjpeg.so.8
-/usr/lib/liblber-2.3.so.0
 /usr/lib/liblber-2.4.so.2
-/usr/lib/libldap-2.3.so.0
 /usr/lib/libldap-2.4.so.2
 /usr/lib/libltdl.so.3
 /usr/lib/libltdl.so.7
@@ -56,7 +54,6 @@
 /usr/lib/libpng.so.14
 /usr/lib/libpng12.so.0
 /usr/lib/libpng14.so.14
-/usr/lib/libreadline.so.4
 /usr/lib/libreadline.so.5
 /usr/lib/libslang.so.1
 /usr/lib/libslang.so.2
@@ -65,4 +62,3 @@
 /usr/lib/libusb-1.0.so.0
 /usr/lib/libvga.so.1
 /usr/lib/libvgagl.so.1
-/usr/lib/libz.so.1
diff --git a/source/a/acl/acl.SlackBuild b/source/a/acl/acl.SlackBuild
index a97bf27d..a74fb355 100755
--- a/source/a/acl/acl.SlackBuild
+++ b/source/a/acl/acl.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=acl
-VERSION=2.2.50
+VERSION=2.2.51
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -50,7 +50,7 @@ mkdir -p $TMP $PKG
 cd $TMP
 
 rm -rf acl-$(echo $VERSION | cut -f 1 -d '-')
-tar xzvf $CWD/acl-$VERSION.src.tar.gz || exit 1
+tar xvf $CWD/acl-$VERSION.src.tar.?z || exit 1
 cd acl-$(echo $VERSION | cut -f 1 -d '-') || exit 1
 
 chown -R root:root .
diff --git a/source/a/acpid/acpid.SlackBuild b/source/a/acpid/acpid.SlackBuild
index bd96d8b1..0b761d78 100755
--- a/source/a/acpid/acpid.SlackBuild
+++ b/source/a/acpid/acpid.SlackBuild
@@ -25,12 +25,14 @@ VERSION=${VERSION:-$(echo acpid-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d -
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -40,9 +42,22 @@ PKG=$TMP/package-acpid
 
 NUMJOBS=${NUMJOBS:--j8}
 
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
-
 cd $TMP
 rm -rf acpid-$VERSION
 tar xvf $CWD/acpid-$VERSION.tar.?z* || exit 1
@@ -54,15 +69,29 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-make install \
-  OPT="-O2" \
-  PREFIX=/usr \
-  MANDIR=/usr/man \
-  DOCDIR=/usr/doc/acpid-$VERSION \
-  DESTDIR=$PKG \
-  || exit 1
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/acpid-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-strip --strip-unneeded $PKG/usr/bin/acpi_listen $PKG/usr/sbin/acpid
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
diff --git a/source/a/attr/attr.SlackBuild b/source/a/attr/attr.SlackBuild
index 1b6fe70b..892961cf 100755
--- a/source/a/attr/attr.SlackBuild
+++ b/source/a/attr/attr.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=attr
-VERSION=2.4.45
+VERSION=2.4.46
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -49,7 +49,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf attr-$(echo $VERSION | cut -f 1 -d '-')
-tar xvf $CWD/attr-$VERSION.src.tar.gz || exit 1
+tar xvf $CWD/attr-$VERSION.src.tar.?z || exit 1
 cd attr-$(echo $VERSION | cut -f 1 -d '-') || exit 1
 chown -R root:root .
 find . \
diff --git a/source/a/bash/bash-4.1-patches/bash41-001 b/source/a/bash/bash-4.1-patches/bash41-001
deleted file mode 100644
index 758e1fa4..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-001
+++ /dev/null
@@ -1,48 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-001
-
-Bug-Reported-by:	Yann Rouillard <yann@pleiades.fr.eu.org>
-Bug-Reference-ID:	<4B44A410.4070107@pleiades.fr.eu.org>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00018.html
-
-Bug-Description:
-
-A prototype for vsnprintf was incorrect, and caused compilation failures
-on systems that did not have a suitable vsnprintf, but had a declaration in
-one of the system header files.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/builtins/printf.def	2009-11-20 15:31:23.000000000 -0500
---- builtins/printf.def	2010-01-07 08:50:06.000000000 -0500
-***************
-*** 173,177 ****
-  
-  #if !HAVE_VSNPRINTF
-! extern int vsnprintf __P((char *, size_t, const char *, ...)) __attribute__((__format__ (printf, 3, 4)));
-  #endif
-  
---- 173,177 ----
-  
-  #if !HAVE_VSNPRINTF
-! extern int vsnprintf __P((char *, size_t, const char *, va_list)) __attribute__((__format__ (printf, 3, 0)));
-  #endif
-  
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 0
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 1
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-002 b/source/a/bash/bash-4.1-patches/bash41-002
deleted file mode 100644
index a1151985..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-002
+++ /dev/null
@@ -1,65 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-002
-
-Bug-Reported-by:	guillaume.outters@free.fr
-Bug-Reference-ID:	<20100105230441.70D171AA7F52@asterix.local>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00017.html
-
-Bug-Description:
-
-Bash-4.1/Readline-6.1 introduced a hook function that allows applications
-to rewrite or modify filenames read from the file system before comparing
-them with a word to be completed.  The converted filename, if it matches,
-needs to be inserted into the line buffer, replacing the original contents.
-
-This fixes a completion bug on Mac OS X involving filenames containing
-UTF-8 characters.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/lib/readline/complete.c	2009-11-29 18:39:30.000000000 -0500
---- lib/readline/complete.c	2010-01-06 08:30:23.000000000 -0500
-***************
-*** 2139,2143 ****
-        if (filename_len == 0)
-  	{
-! 	  if (_rl_match_hidden_files == 0 && HIDDEN_FILE (entry->d_name))
-  	    continue;
-  
---- 2139,2143 ----
-        if (filename_len == 0)
-  	{
-! 	  if (_rl_match_hidden_files == 0 && HIDDEN_FILE (convfn))
-  	    continue;
-  
-***************
-*** 2220,2224 ****
-  	    }
-  
-! 	  strcpy (temp + dirlen, entry->d_name);
-  	}
-        else
---- 2220,2224 ----
-  	    }
-  
-! 	  strcpy (temp + dirlen, convfn);
-  	}
-        else
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 1
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 2
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-003 b/source/a/bash/bash-4.1-patches/bash41-003
deleted file mode 100644
index 479fdcd9..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-003
+++ /dev/null
@@ -1,48 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-003
-
-Bug-Reported-by:	coyote@wariat.org.pl
-Bug-Reference-ID:	<4b64a1f8.06e2660a.60af.4bfb@mx.google.com>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00135.html
-
-Bug-Description:
-
-If command completion is attempted on a word with a quoted globbing
-character (e.g., `*' or `?'), bash can reference a NULL pointer and
-dump core.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/bashline.c	2009-10-24 14:10:19.000000000 -0400
---- bashline.c	2010-01-30 21:53:49.000000000 -0500
-***************
-*** 1681,1685 ****
-       characters in the common prefix are bad) will ever be returned on
-       regular completion. */
-!   if (glob_pattern_p (hint))
-      {
-        if (state == 0)
---- 1681,1685 ----
-       characters in the common prefix are bad) will ever be returned on
-       regular completion. */
-!   if (globpat)
-      {
-        if (state == 0)
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 2
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 3
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-004 b/source/a/bash/bash-4.1-patches/bash41-004
deleted file mode 100644
index 33f79bb7..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-004
+++ /dev/null
@@ -1,47 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-004
-
-Bug-Reported-by:	Crestez Dan Leonard <cdleonard@gmail.com>
-Bug-Reference-ID:	<1265592839.30682.21.camel@deskbox>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-02/msg00034.html
-
-Bug-Description:
-
-When running in Posix mode and executing a shell function without local
-variables, bash will not propagate a variable in a special builtin's temporary
-environment to have global scope.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/variables.c	2009-11-03 14:13:58.000000000 -0500
---- variables.c	2010-02-08 17:36:18.000000000 -0500
-***************
-*** 3809,3812 ****
---- 3809,3817 ----
-    if (tempvar_p (var) && (posixly_correct || (var->attributes & att_propagate)))
-      {
-+       /* Make sure we have a hash table to store the variable in while it is
-+ 	 being propagated down to the global variables table.  Create one if
-+ 	 we have to */
-+       if ((vc_isfuncenv (shell_variables) || vc_istempenv (shell_variables)) && shell_variables->table == 0)
-+ 	shell_variables->table = hash_create (0);
-        /* XXX - should we set v->context here? */
-        v = bind_variable_internal (var->name, value_cell (var), shell_variables->table, 0, 0);
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 3
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 4
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-005 b/source/a/bash/bash-4.1-patches/bash41-005
deleted file mode 100644
index 8a2fec8a..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-005
+++ /dev/null
@@ -1,56 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-005
-
-Bug-Reported-by:	werner@suse.de
-Bug-Reference-ID:	<201002251238.o1PCcYcg016893@boole.suse.de>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-02/msg00132.html
-
-Bug-Description:
-
-When the `read' builtin times out after the timeout specified with -t is
-exceeded, it does not reset the flags that tell signal handlers to process
-signals immediately instead of deferring their handling.  This can result
-in unsafe functions being called from signal handlers, which can cause bash
-to hang or dump core.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/builtins/read.def	2009-10-08 11:35:46.000000000 -0400
---- builtins/read.def	2010-03-17 17:35:39.000000000 -0400
-***************
-*** 616,621 ****
-      zsyncfd (fd);
-  
--   interrupt_immediately--;
--   terminate_immediately--;
-    discard_unwind_frame ("read_builtin");
-  
---- 616,619 ----
-***************
-*** 624,627 ****
---- 622,628 ----
-  assign_vars:
-  
-+   interrupt_immediately--;
-+   terminate_immediately--;
-+ 
-  #if defined (ARRAY_VARS)
-    /* If -a was given, take the string read, break it into a list of words,
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 4
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 5
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-006 b/source/a/bash/bash-4.1-patches/bash41-006
deleted file mode 100644
index d6553b8b..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-006
+++ /dev/null
@@ -1,76 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-006
-
-Bug-Reported-by:	Mike Frysinger <vapier@gentoo.org>
-Bug-Reference-ID:	<201003210155.56618.vapier@gentoo.org>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-03/msg00063.html
-
-Bug-Description:
-
-Bash did not correctly print/reproduce here documents attached to commands
-inside compound commands such as for and while.  This affected the
-execution of such commands inside a shell function when the function
-definition is saved and later restored using `.' or `eval'.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/print_cmd.c	2009-09-16 15:32:26.000000000 -0400
---- print_cmd.c	2010-03-22 21:15:30.000000000 -0400
-***************
-*** 114,117 ****
---- 114,123 ----
-  #define CHECK_XTRACE_FP	xtrace_fp = (xtrace_fp ? xtrace_fp : stderr)
-  
-+ #define PRINT_DEFERRED_HEREDOCS(x) \
-+   do { \
-+     if (deferred_heredocs) \
-+       print_deferred_heredocs (x); \
-+   } while (0)
-+ 
-  /* Non-zero means the stuff being printed is inside of a function def. */
-  static int inside_function_def;
-***************
-*** 561,571 ****
-  {
-    print_for_command_head (for_command);
-- 
-    cprintf (";");
-    newline ("do\n");
-    indentation += indentation_amount;
-    make_command_string_internal (for_command->action);
-    semicolon ();
-    indentation -= indentation_amount;
-    newline ("done");
-  }
---- 566,578 ----
-  {
-    print_for_command_head (for_command);
-    cprintf (";");
-    newline ("do\n");
-+ 
-    indentation += indentation_amount;
-    make_command_string_internal (for_command->action);
-+   PRINT_DEFERRED_HEREDOCS ("");
-    semicolon ();
-    indentation -= indentation_amount;
-+ 
-    newline ("done");
-  }
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 5
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 6
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-007 b/source/a/bash/bash-4.1-patches/bash41-007
deleted file mode 100644
index 07b4796c..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-007
+++ /dev/null
@@ -1,47 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-007
-
-Bug-Reported-by:	Rob Robason <rob@robason.net>
-Bug-Reference-ID:	<1269513145.22336.9.camel@home.robason.homelinux.net>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-03/msg00089.html
-
-Bug-Description:
-
-A typo caused bash to not honor a precision specification in a printf
-format.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/builtins/printf.def	2010-01-18 10:50:22.000000000 -0500
---- builtins/printf.def	2010-03-25 09:40:56.000000000 -0400
-***************
-*** 118,122 ****
-        nw = vflag ? vbprintf (f, fieldwidth, func) : printf (f, fieldwidth, func); \
-      else if (have_precision) \
-!       nw = vflag ? vbprintf (f, precision, func) : printf (f, fieldwidth, func); \
-      else \
-        nw = vflag ? vbprintf (f, func) : printf (f, func); \
---- 118,122 ----
-        nw = vflag ? vbprintf (f, fieldwidth, func) : printf (f, fieldwidth, func); \
-      else if (have_precision) \
-!       nw = vflag ? vbprintf (f, precision, func) : printf (f, precision, func); \
-      else \
-        nw = vflag ? vbprintf (f, func) : printf (f, func); \
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 6
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 7
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-008 b/source/a/bash/bash-4.1-patches/bash41-008
deleted file mode 100644
index 2bec4de4..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-008
+++ /dev/null
@@ -1,49 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-008
-
-Bug-Reported-by:	Dennis van Dok <dvandok@gmail.com>
-Bug-Reference-ID:	<4BBF2501.5050703@gmail.com>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-04/msg00038.html
-
-Bug-Description:
-
-When declaring an associative array and implicitly assigning a value
-to element "0", bash does not correctly allocate memory, leading to
-a segmentation violation when that element or the array itself is
-unset.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/builtins/declare.def	2009-11-25 19:42:00.000000000 -0500
---- builtins/declare.def	2010-05-30 18:25:21.000000000 -0400
-***************
-*** 513,517 ****
-  	      /* let bind_{array,assoc}_variable take care of this. */
-  	      if (assoc_p (var))
-! 		bind_assoc_variable (var, name, "0", value, aflags);
-  	      else
-  		bind_array_variable (name, 0, value, aflags);
---- 519,523 ----
-  	      /* let bind_{array,assoc}_variable take care of this. */
-  	      if (assoc_p (var))
-! 		bind_assoc_variable (var, name, savestring ("0"), value, aflags);
-  	      else
-  		bind_array_variable (name, 0, value, aflags);
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 7
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 8
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.1-patches/bash41-009 b/source/a/bash/bash-4.1-patches/bash41-009
deleted file mode 100644
index ae0f1e3e..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-009
+++ /dev/null
@@ -1,48 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-009
-
-Bug-Reported-by:	Tomas Trnka <tomastrnka@gmx.com>
-Bug-Reference-ID:	<201003242030.02166.tomastrnka@gmx.com>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-03/msg00090.html
-
-Bug-Description:
-
-An arriving SIGCHLD will interrupt `slow' system calls such as write(2) to
-or read(2) from a terminal.  This results in an error message and truncated
-input or output.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/sig.c	Fri Aug 14 16:31:52 2009
---- sig.c	Fri Mar 26 22:34:11 2010
-***************
-*** 655,660 ****
---- 655,663 ----
-      act.sa_flags |= SA_INTERRUPT;	/* XXX */
-    else
-      act.sa_flags |= SA_RESTART;		/* XXX */
-+ #else
-+   if (sig == SIGCHLD)
-+     act.sa_flags |= SA_RESTART;
-  #endif
-    sigemptyset (&act.sa_mask);
-    sigemptyset (&oact.sa_mask);
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 8
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 9
-  
-  #endif /* _PATCHLEVEL_H_ */
-
diff --git a/source/a/bash/bash-4.1-patches/bash41-010 b/source/a/bash/bash-4.1-patches/bash41-010
deleted file mode 100644
index b5a4b615..00000000
--- a/source/a/bash/bash-4.1-patches/bash41-010
+++ /dev/null
@@ -1,68 +0,0 @@
-			     BASH PATCH REPORT
-			     =================
-
-Bash-Release:	4.1
-Patch-ID:	bash41-010
-
-Bug-Reported-by:	Stephane Jourdois <sjourdois@gmail.com>
-Bug-Reference-ID:	<AANLkTimbh1t2BmCjnCgACpEidArJMBIEtr30Vv3VzHxf@mail.gmail.com>
-Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2010-05/msg00165.html
-
-Bug-Description:
-
-The expansion of the \W prompt string escape sequence incorrectly used
-strcpy to copy overlapping strings.  Only memmove works in this case.
-
-Patch (apply with `patch -p0'):
-
-*** ../bash-4.1-patched/parse.y	2009-12-30 12:51:42.000000000 -0500
---- parse.y	2011-02-24 16:40:48.000000000 -0500
-***************
-*** 5153,5157 ****
-  			t = strrchr (t_string, '/');
-  			if (t)
-! 			  strcpy (t_string, t + 1);
-  		      }
-  		  }
---- 5153,5157 ----
-  			t = strrchr (t_string, '/');
-  			if (t)
-! 			  memmove (t_string, t + 1, strlen (t));
-  		      }
-  		  }
-*** ../bash-4.1-patched/y.tab.c	2009-12-30 12:52:02.000000000 -0500
---- y.tab.c	2011-02-24 16:50:27.000000000 -0500
-***************
-*** 7482,7486 ****
-  			t = strrchr (t_string, '/');
-  			if (t)
-! 			  strcpy (t_string, t + 1);
-  		      }
-  		  }
---- 7482,7486 ----
-  			t = strrchr (t_string, '/');
-  			if (t)
-! 			  memmove (t_string, t + 1, strlen (t));
-  		      }
-  		  }
-***************
-*** 8244,8246 ****
-  }
-  #endif /* HANDLE_MULTIBYTE */
-- 
---- 8244,8245 ----
-*** ../bash-4.1-patched/patchlevel.h	2009-10-01 16:39:22.000000000 -0400
---- patchlevel.h	2010-01-14 09:38:08.000000000 -0500
-***************
-*** 26,30 ****
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 9
-  
-  #endif /* _PATCHLEVEL_H_ */
---- 26,30 ----
-     looks for to find the patch level (for the sccs version string). */
-  
-! #define PATCHLEVEL 10
-  
-  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-001 b/source/a/bash/bash-4.2-patches/bash42-001
new file mode 100644
index 00000000..547aaa06
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-001
@@ -0,0 +1,78 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-001
+
+Bug-Reported-by:	Juergen Daubert <jue@jue.li>
+Bug-Reference-ID:	<20110214175132.GA19813@jue.netz>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00125.html
+
+Bug-Description:
+
+When running in Posix mode, bash does not correctly expand the right-hand
+side of a double-quoted word expansion containing single quotes.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2011-01-02 16:12:51.000000000 -0500
+--- subst.c	2011-02-19 00:00:00.000000000 -0500
+***************
+*** 1380,1387 ****
+  
+    /* The handling of dolbrace_state needs to agree with the code in parse.y:
+!      parse_matched_pair() */
+!   dolbrace_state = 0;
+!   if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+!     dolbrace_state = (flags & SX_POSIXEXP) ? DOLBRACE_QUOTE : DOLBRACE_PARAM;
+  
+    i = *sindex;
+--- 1380,1389 ----
+  
+    /* The handling of dolbrace_state needs to agree with the code in parse.y:
+!      parse_matched_pair().  The different initial value is to handle the
+!      case where this function is called to parse the word in
+!      ${param op word} (SX_WORD). */
+!   dolbrace_state = (flags & SX_WORD) ? DOLBRACE_WORD : DOLBRACE_PARAM;
+!   if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && (flags & SX_POSIXEXP))
+!     dolbrace_state = DOLBRACE_QUOTE;
+  
+    i = *sindex;
+***************
+*** 7177,7181 ****
+        /* Extract the contents of the ${ ... } expansion
+  	 according to the Posix.2 rules. */
+!       value = extract_dollar_brace_string (string, &sindex, quoted, (c == '%' || c == '#') ? SX_POSIXEXP : 0);
+        if (string[sindex] == RBRACE)
+  	sindex++;
+--- 7181,7185 ----
+        /* Extract the contents of the ${ ... } expansion
+  	 according to the Posix.2 rules. */
+!       value = extract_dollar_brace_string (string, &sindex, quoted, (c == '%' || c == '#' || c =='/' || c == '^' || c == ',' || c ==':') ? SX_POSIXEXP|SX_WORD : SX_WORD);
+        if (string[sindex] == RBRACE)
+  	sindex++;
+*** ../bash-4.2-patched/subst.h	2010-12-02 20:21:29.000000000 -0500
+--- subst.h	2011-02-16 21:12:09.000000000 -0500
+***************
+*** 57,60 ****
+--- 57,61 ----
+  #define SX_ARITHSUB	0x0080	/* extracting $(( ... )) (currently unused) */
+  #define SX_POSIXEXP	0x0100	/* extracting new Posix pattern removal expansions in extract_dollar_brace_string */
++ #define SX_WORD		0x0200	/* extracting word in ${param op word} */
+  
+  /* Remove backslashes which are quoting backquotes from STRING.  Modifies
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 0
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 1
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-002 b/source/a/bash/bash-4.2-patches/bash42-002
new file mode 100644
index 00000000..077c7e0f
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-002
@@ -0,0 +1,60 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-002
+
+Bug-Reported-by:	Clark J. Wang <dearvoid@gmail.com>
+Bug-Reference-ID:	<AANLkTimGbW7aC4E5infXP6ku5WPci4t=xVc+L1SyHqrD@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00157.html
+
+Bug-Description:
+
+The readline vi-mode `cc', `dd', and `yy' commands failed to modify the
+entire line.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/readline/vi_mode.c	2010-11-20 19:51:39.000000000 -0500
+--- lib/readline/vi_mode.c	2011-02-17 20:24:25.000000000 -0500
+***************
+*** 1115,1119 ****
+        _rl_vi_last_motion = c;
+        RL_UNSETSTATE (RL_STATE_VIMOTION);
+!       return (0);
+      }
+  #if defined (READLINE_CALLBACKS)
+--- 1115,1119 ----
+        _rl_vi_last_motion = c;
+        RL_UNSETSTATE (RL_STATE_VIMOTION);
+!       return (vidomove_dispatch (m));
+      }
+  #if defined (READLINE_CALLBACKS)
+*** ../bash-4.2-patched/lib/readline/callback.c	2010-06-06 12:18:58.000000000 -0400
+--- lib/readline/callback.c	2011-02-17 20:43:28.000000000 -0500
+***************
+*** 149,152 ****
+--- 149,155 ----
+  	  /* Should handle everything, including cleanup, numeric arguments,
+  	     and turning off RL_STATE_VIMOTION */
++ 	  if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)
++ 	    _rl_internal_char_cleanup ();
++ 
+  	  return;
+  	}
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 1
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 2
+  
+  #endif /* _PATCHLEVEL_H_ */
+
diff --git a/source/a/bash/bash-4.2-patches/bash42-003 b/source/a/bash/bash-4.2-patches/bash42-003
new file mode 100644
index 00000000..c488e96b
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-003
@@ -0,0 +1,318 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-003
+
+Bug-Reported-by:	Clark J. Wang <dearvoid@gmail.com>
+Bug-Reference-ID:	<AANLkTikZ_rVV-frR8Fh0PzhXnMKnm5XsUR-F3qtPPs5G@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00136.html
+
+Bug-Description:
+
+When using the pattern replacement and pattern removal word expansions, bash
+miscalculates the possible match length in the presence of an unescaped left
+bracket without a closing right bracket, resulting in a failure to match
+the pattern.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/glob/gmisc.c	2011-02-05 16:11:17.000000000 -0500
+--- lib/glob/gmisc.c	2011-02-18 23:53:42.000000000 -0500
+***************
+*** 78,83 ****
+       size_t wmax;
+  {
+!   wchar_t wc, *wbrack;
+!   int matlen, t, in_cclass, in_collsym, in_equiv;
+  
+    if (*wpat == 0)
+--- 78,83 ----
+       size_t wmax;
+  {
+!   wchar_t wc;
+!   int matlen, bracklen, t, in_cclass, in_collsym, in_equiv;
+  
+    if (*wpat == 0)
+***************
+*** 119,123 ****
+  	case L'[':
+  	  /* scan for ending `]', skipping over embedded [:...:] */
+! 	  wbrack = wpat;
+  	  wc = *wpat++;
+  	  do
+--- 119,123 ----
+  	case L'[':
+  	  /* scan for ending `]', skipping over embedded [:...:] */
+! 	  bracklen = 1;
+  	  wc = *wpat++;
+  	  do
+***************
+*** 125,140 ****
+  	      if (wc == 0)
+  		{
+! 	          matlen += wpat - wbrack - 1;	/* incremented below */
+! 	          break;
+  	        }
+  	      else if (wc == L'\\')
+  		{
+! 		  wc = *wpat++;
+! 		  if (*wpat == 0)
+! 		    break;
+  		}
+  	      else if (wc == L'[' && *wpat == L':')	/* character class */
+  		{
+  		  wpat++;
+  		  in_cclass = 1;
+  		}
+--- 125,148 ----
+  	      if (wc == 0)
+  		{
+! 		  wpat--;			/* back up to NUL */
+! 	          matlen += bracklen;
+! 	          goto bad_bracket;
+  	        }
+  	      else if (wc == L'\\')
+  		{
+! 		  /* *wpat == backslash-escaped character */
+! 		  bracklen++;
+! 		  /* If the backslash or backslash-escape ends the string,
+! 		     bail.  The ++wpat skips over the backslash escape */
+! 		  if (*wpat == 0 || *++wpat == 0)
+! 		    {
+! 		      matlen += bracklen;
+! 		      goto bad_bracket;
+! 		    }
+  		}
+  	      else if (wc == L'[' && *wpat == L':')	/* character class */
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  in_cclass = 1;
+  		}
+***************
+*** 142,145 ****
+--- 150,154 ----
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  in_cclass = 0;
+  		}
+***************
+*** 147,152 ****
+  		{
+  		  wpat++;
+  		  if (*wpat == L']')	/* right bracket can appear as collating symbol */
+! 		    wpat++;
+  		  in_collsym = 1;
+  		}
+--- 156,165 ----
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  if (*wpat == L']')	/* right bracket can appear as collating symbol */
+! 		    {
+! 		      wpat++;
+! 		      bracklen++;
+! 		    }
+  		  in_collsym = 1;
+  		}
+***************
+*** 154,157 ****
+--- 167,171 ----
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  in_collsym = 0;
+  		}
+***************
+*** 159,164 ****
+  		{
+  		  wpat++;
+  		  if (*wpat == L']')	/* right bracket can appear as equivalence class */
+! 		    wpat++;
+  		  in_equiv = 1;
+  		}
+--- 173,182 ----
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  if (*wpat == L']')	/* right bracket can appear as equivalence class */
+! 		    {
+! 		      wpat++;
+! 		      bracklen++;
+! 		    }
+  		  in_equiv = 1;
+  		}
+***************
+*** 166,174 ****
+--- 184,196 ----
+  		{
+  		  wpat++;
++ 		  bracklen++;
+  		  in_equiv = 0;
+  		}
++ 	      else
++ 		bracklen++;
+  	    }
+  	  while ((wc = *wpat++) != L']');
+  	  matlen++;		/* bracket expression can only match one char */
++ bad_bracket:
+  	  break;
+  	}
+***************
+*** 214,219 ****
+       size_t max;
+  {
+!   char c, *brack;
+!   int matlen, t, in_cclass, in_collsym, in_equiv;
+  
+    if (*pat == 0)
+--- 236,241 ----
+       size_t max;
+  {
+!   char c;
+!   int matlen, bracklen, t, in_cclass, in_collsym, in_equiv;
+  
+    if (*pat == 0)
+***************
+*** 255,259 ****
+  	case '[':
+  	  /* scan for ending `]', skipping over embedded [:...:] */
+! 	  brack = pat;
+  	  c = *pat++;
+  	  do
+--- 277,281 ----
+  	case '[':
+  	  /* scan for ending `]', skipping over embedded [:...:] */
+! 	  bracklen = 1;
+  	  c = *pat++;
+  	  do
+***************
+*** 261,276 ****
+  	      if (c == 0)
+  		{
+! 	          matlen += pat - brack - 1;	/* incremented below */
+! 	          break;
+  	        }
+  	      else if (c == '\\')
+  		{
+! 		  c = *pat++;
+! 		  if (*pat == 0)
+! 		    break;
+  		}
+  	      else if (c == '[' && *pat == ':')	/* character class */
+  		{
+  		  pat++;
+  		  in_cclass = 1;
+  		}
+--- 283,306 ----
+  	      if (c == 0)
+  		{
+! 		  pat--;			/* back up to NUL */
+! 		  matlen += bracklen;
+! 		  goto bad_bracket;
+  	        }
+  	      else if (c == '\\')
+  		{
+! 		  /* *pat == backslash-escaped character */
+! 		  bracklen++;
+! 		  /* If the backslash or backslash-escape ends the string,
+! 		     bail.  The ++pat skips over the backslash escape */
+! 		  if (*pat == 0 || *++pat == 0)
+! 		    {
+! 		      matlen += bracklen;
+! 		      goto bad_bracket;
+! 		    }
+  		}
+  	      else if (c == '[' && *pat == ':')	/* character class */
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  in_cclass = 1;
+  		}
+***************
+*** 278,281 ****
+--- 308,312 ----
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  in_cclass = 0;
+  		}
+***************
+*** 283,288 ****
+  		{
+  		  pat++;
+  		  if (*pat == ']')	/* right bracket can appear as collating symbol */
+! 		    pat++;
+  		  in_collsym = 1;
+  		}
+--- 314,323 ----
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  if (*pat == ']')	/* right bracket can appear as collating symbol */
+! 		    {
+! 		      pat++;
+! 		      bracklen++;
+! 		    }
+  		  in_collsym = 1;
+  		}
+***************
+*** 290,293 ****
+--- 325,329 ----
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  in_collsym = 0;
+  		}
+***************
+*** 295,300 ****
+  		{
+  		  pat++;
+  		  if (*pat == ']')	/* right bracket can appear as equivalence class */
+! 		    pat++;
+  		  in_equiv = 1;
+  		}
+--- 331,340 ----
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  if (*pat == ']')	/* right bracket can appear as equivalence class */
+! 		    {
+! 		      pat++;
+! 		      bracklen++;
+! 		    }
+  		  in_equiv = 1;
+  		}
+***************
+*** 302,310 ****
+--- 342,354 ----
+  		{
+  		  pat++;
++ 		  bracklen++;
+  		  in_equiv = 0;
+  		}
++ 	      else
++ 		bracklen++;
+  	    }
+  	  while ((c = *pat++) != ']');
+  	  matlen++;		/* bracket expression can only match one char */
++ bad_bracket:
+  	  break;
+  	}
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 2
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 3
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-004 b/source/a/bash/bash-4.2-patches/bash42-004
new file mode 100644
index 00000000..fe29f82c
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-004
@@ -0,0 +1,53 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-004
+
+Bug-Reported-by:	Mike Frysinger <vapier@gentoo.org>
+Bug-Reference-ID:	<201102182106.17834.vapier@gentoo.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00222.html
+
+Bug-Description:
+
+When used in contexts where word splitting and quote removal were not
+performed, such as pattern removal or pattern substitution, empty strings
+(either literal or resulting from quoted variables that were unset or
+null) were not matched correctly, resulting in failure.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2011-01-02 16:12:51.000000000 -0500
+--- subst.c	2011-02-18 22:30:13.000000000 -0500
+***************
+*** 3373,3379 ****
+    if (string == 0 || *string == '\0')
+      return (WORD_LIST *)NULL;
+  
+!   td.flags = 0;
+    td.word = string;
+    tresult = call_expand_word_internal (&td, quoted, 1, dollar_at_p, has_dollar_at);
+    return (tresult);
+--- 3373,3379 ----
+    if (string == 0 || *string == '\0')
+      return (WORD_LIST *)NULL;
+  
+!   td.flags = W_NOSPLIT2;		/* no splitting, remove "" and '' */
+    td.word = string;
+    tresult = call_expand_word_internal (&td, quoted, 1, dollar_at_p, has_dollar_at);
+    return (tresult);
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 3
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 4
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-005 b/source/a/bash/bash-4.2-patches/bash42-005
new file mode 100644
index 00000000..3ca9fc1d
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-005
@@ -0,0 +1,131 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-005
+
+Bug-Reported-by:	Dennis Williamson <dennistwilliamson@gmail.com>
+Bug-Reference-ID:	<AANLkTikDbEV5rnbPc0zOfmZfBcg0xGetzLLzK+KjRiNa@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00147.html
+
+Bug-Description:
+
+Systems that use tzset() to set the local timezone require the TZ variable
+to be in the environment.  Bash must make sure the environment has been
+modified with any updated value for TZ before calling tzset().  This
+affects prompt string expansions and the `%T' printf conversion specification
+on systems that do not allow bash to supply a replacement for getenv(3).
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/variables.h	2010-12-02 20:22:01.000000000 -0500
+--- variables.h	2011-02-19 19:57:12.000000000 -0500
+***************
+*** 314,317 ****
+--- 314,318 ----
+  extern void sort_variables __P((SHELL_VAR **));
+  
++ extern int chkexport __P((char *));
+  extern void maybe_make_export_env __P((void));
+  extern void update_export_env_inplace __P((char *, int, char *));
+*** ../bash-4.2-patched/variables.c	2011-01-24 20:07:48.000000000 -0500
+--- variables.c	2011-02-19 20:04:50.000000000 -0500
+***************
+*** 3654,3657 ****
+--- 3654,3673 ----
+  }
+  
++ int
++ chkexport (name)
++      char *name;
++ {
++   SHELL_VAR *v;
++ 
++   v = find_variable (name);
++   if (exported_p (v))
++     {
++       array_needs_making = 1;
++       maybe_make_export_env ();
++       return 1;
++     }
++   return 0;
++ }
++ 
+  void
+  maybe_make_export_env ()
+***************
+*** 4215,4219 ****
+    { "TEXTDOMAINDIR", sv_locale },
+  
+! #if defined (HAVE_TZSET) && defined (PROMPT_STRING_DECODE)
+    { "TZ", sv_tz },
+  #endif
+--- 4231,4235 ----
+    { "TEXTDOMAINDIR", sv_locale },
+  
+! #if defined (HAVE_TZSET)
+    { "TZ", sv_tz },
+  #endif
+***************
+*** 4559,4568 ****
+  #endif /* HISTORY */
+  
+! #if defined (HAVE_TZSET) && defined (PROMPT_STRING_DECODE)
+  void
+  sv_tz (name)
+       char *name;
+  {
+!   tzset ();
+  }
+  #endif
+--- 4575,4585 ----
+  #endif /* HISTORY */
+  
+! #if defined (HAVE_TZSET)
+  void
+  sv_tz (name)
+       char *name;
+  {
+!   if (chkexport (name))
+!     tzset ();
+  }
+  #endif
+*** ../bash-4.2-patched/parse.y	2011-01-02 15:48:11.000000000 -0500
+--- parse.y	2011-02-19 20:05:00.000000000 -0500
+***************
+*** 5136,5139 ****
+--- 5136,5142 ----
+  	      /* Make the current time/date into a string. */
+  	      (void) time (&the_time);
++ #if defined (HAVE_TZSET)
++ 	      sv_tz ("TZ");		/* XXX -- just make sure */
++ #endif
+  	      tm = localtime (&the_time);
+  
+*** ../bash-4.2-patched/builtins/printf.def	2010-11-23 10:02:55.000000000 -0500
+--- builtins/printf.def	2011-02-19 20:05:04.000000000 -0500
+***************
+*** 466,469 ****
+--- 466,472 ----
+  		else
+  		  secs = arg;
++ #if defined (HAVE_TZSET)
++ 		sv_tz ("TZ");		/* XXX -- just make sure */
++ #endif
+  		tm = localtime (&secs);
+  		n = strftime (timebuf, sizeof (timebuf), timefmt, tm);
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 4
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 5
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-006 b/source/a/bash/bash-4.2-patches/bash42-006
new file mode 100644
index 00000000..be6e49c7
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-006
@@ -0,0 +1,46 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-006
+
+Bug-Reported-by:	Allan McRae <allan@archlinux.org>
+Bug-Reference-ID:	<4D6D0D0B.50908@archlinux.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-03/msg00001.html
+
+Bug-Description:
+
+A problem with bash42-005 caused it to dump core if TZ was unset.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/variables.c	2011-02-25 12:07:41.000000000 -0500
+--- variables.c	2011-03-01 10:13:04.000000000 -0500
+***************
+*** 3661,3665 ****
+  
+    v = find_variable (name);
+!   if (exported_p (v))
+      {
+        array_needs_making = 1;
+--- 3661,3665 ----
+  
+    v = find_variable (name);
+!   if (v && exported_p (v))
+      {
+        array_needs_making = 1;
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 5
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 6
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-007 b/source/a/bash/bash-4.2-patches/bash42-007
new file mode 100644
index 00000000..d16156e2
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-007
@@ -0,0 +1,46 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-007
+
+Bug-Reported-by:	Matthias Klose <doko@debian.org>
+Bug-Reference-ID:	<4D6FD2AC.1010500@debian.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-03/msg00015.html
+
+Bug-Description:
+
+When used in contexts where word splitting and quote removal were not
+performed, such as case statement word expansion, empty strings
+(either literal or resulting from quoted variables that were unset or
+null) were not expanded correctly, resulting in failure.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2011-02-25 12:03:58.000000000 -0500
+--- subst.c	2011-03-03 14:08:23.000000000 -0500
+***************
+*** 4609,4614 ****
+--- 4611,4617 ----
+    if (ifs_firstc == 0)
+  #endif
+      word->flags |= W_NOSPLIT;
++   word->flags |= W_NOSPLIT2;
+    result = call_expand_word_internal (word, quoted, 0, (int *)NULL, (int *)NULL);
+    expand_no_split_dollar_star = 0;
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 6
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 7
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-008 b/source/a/bash/bash-4.2-patches/bash42-008
new file mode 100644
index 00000000..631abbdf
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-008
@@ -0,0 +1,74 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-008
+
+Bug-Reported-by:	Doug McMahon <mc2man@optonline.net>
+Bug-Reference-ID:	<1299441211.2535.11.camel@doug-XPS-M1330>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-03/msg00050.html
+
+Bug-Description:
+
+Bash-4.2 does not attempt to save the shell history on receipt of a
+terminating signal that is handled synchronously.  Unfortunately, the
+`close' button on most X11 terminal emulators sends SIGHUP, which
+kills the shell.
+
+This is a very small patch to save the history in the case that an
+interactive shell receives a SIGHUP or SIGTERM while in readline and
+reading a command.
+
+The next version of bash will do this differently.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/sig.c	Tue Nov 23 08:21:22 2010
+--- sig.c	Tue Mar  8 21:28:32 2011
+***************
+*** 47,50 ****
+--- 47,51 ----
+  #if defined (READLINE)
+  #  include "bashline.h"
++ #  include <readline/readline.h>
+  #endif
+  
+***************
+*** 63,66 ****
+--- 64,68 ----
+  extern int history_lines_this_session;
+  #endif
++ extern int no_line_editing;
+  
+  extern void initialize_siglist ();
+***************
+*** 506,510 ****
+  #if defined (HISTORY)
+        /* XXX - will inhibit history file being written */
+!       history_lines_this_session = 0;
+  #endif
+        terminate_immediately = 0;
+--- 508,515 ----
+  #if defined (HISTORY)
+        /* XXX - will inhibit history file being written */
+! #  if defined (READLINE)
+!       if (interactive_shell == 0 || interactive == 0 || (sig != SIGHUP && sig != SIGTERM) || no_line_editing || (RL_ISSTATE (RL_STATE_READCMD) == 0))
+! #  endif
+!         history_lines_this_session = 0;
+  #endif
+        terminate_immediately = 0;
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 7
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 8
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-009 b/source/a/bash/bash-4.2-patches/bash42-009
new file mode 100644
index 00000000..83a7e2c7
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-009
@@ -0,0 +1,82 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-009
+
+Bug-Reported-by:	<piuma@piumalab.org>
+Bug-Reference-ID:	<4DAAC0DB.7060606@piumalab.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-04/msg00075.html
+
+Bug-Description:
+
+Under certain circumstances, running `fc -l' two times in succession with a
+relative history offset at the end of the history will result in an incorrect
+calculation of the last history entry and a seg fault.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/fc.def	2010-05-30 18:25:38.000000000 -0400
+--- builtins/fc.def	2011-04-19 15:46:17.000000000 -0400
+***************
+*** 305,309 ****
+  
+    /* XXX */
+!   if (saved_command_line_count > 0 && i == last_hist && hlist[last_hist] == 0)
+      while (last_hist >= 0 && hlist[last_hist] == 0)
+        last_hist--;
+--- 305,309 ----
+  
+    /* XXX */
+!   if (i == last_hist && hlist[last_hist] == 0)
+      while (last_hist >= 0 && hlist[last_hist] == 0)
+        last_hist--;
+***************
+*** 476,480 ****
+  {
+    int sign, n, clen, rh;
+!   register int i, j;
+    register char *s;
+  
+--- 476,480 ----
+  {
+    int sign, n, clen, rh;
+!   register int i, j, last_hist;
+    register char *s;
+  
+***************
+*** 496,500 ****
+       calculation as if it were on. */
+    rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list);
+!   i -= rh + hist_last_line_added;
+  
+    /* No specification defaults to most recent command. */
+--- 496,508 ----
+       calculation as if it were on. */
+    rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list);
+!   last_hist = i - rh - hist_last_line_added;
+! 
+!   if (i == last_hist && hlist[last_hist] == 0)
+!     while (last_hist >= 0 && hlist[last_hist] == 0)
+!       last_hist--;
+!   if (last_hist < 0)
+!     return (-1);
+! 
+!   i = last_hist;
+  
+    /* No specification defaults to most recent command. */
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 8
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 9
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-010 b/source/a/bash/bash-4.2-patches/bash42-010
new file mode 100644
index 00000000..e408abd6
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-010
@@ -0,0 +1,61 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-010
+
+Bug-Reported-by:	Mike Frysinger <vapier@gentoo.org>
+Bug-Reference-ID:	<201104122356.20160.vapier@gentoo.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-04/msg00058.html
+
+Bug-Description:
+
+Bash did not correctly print/reproduce here documents attached to commands
+inside compound commands such as arithmetic for loops and user-specified
+subshells.  This affected the execution of such commands inside a shell
+function when the function definition is saved and later restored using
+`.' or `eval'.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/print_cmd.c	2010-05-30 18:34:08.000000000 -0400
+--- print_cmd.c	2011-04-14 10:43:18.000000000 -0400
+***************
+*** 316,319 ****
+--- 317,321 ----
+  	  skip_this_indent++;
+  	  make_command_string_internal (command->value.Subshell->command);
++ 	  PRINT_DEFERRED_HEREDOCS ("");
+  	  cprintf (" )");
+  	  break;
+***************
+*** 593,596 ****
+--- 606,610 ----
+    indentation += indentation_amount;
+    make_command_string_internal (arith_for_command->action);
++   PRINT_DEFERRED_HEREDOCS ("");
+    semicolon ();
+    indentation -= indentation_amount;
+***************
+*** 654,657 ****
+--- 668,672 ----
+  
+    make_command_string_internal (group_command->command);
++   PRINT_DEFERRED_HEREDOCS ("");
+  
+    if (inside_function_def)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 9
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 10
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-011 b/source/a/bash/bash-4.2-patches/bash42-011
new file mode 100644
index 00000000..26fdf65f
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-011
@@ -0,0 +1,46 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-011
+
+Bug-Reported-by:	"David Parks" <davidparks21@yahoo.com>
+Bug-Reference-ID:	<014101cc82c6$46ac1540$d4043fc0$@com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-10/msg00031.html
+
+Bug-Description:
+
+Overwriting a value in an associative array causes the memory allocated to
+store the key on the second and subsequent assignments to leak.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/assoc.c	2009-08-05 20:19:40.000000000 -0400
+--- assoc.c	2011-10-04 20:23:07.000000000 -0400
+***************
+*** 78,81 ****
+--- 78,86 ----
+    if (b == 0)
+      return -1;
++   /* If we are overwriting an existing element's value, we're not going to
++      use the key.  Nothing in the array assignment code path frees the key
++      string, so we can free it here to avoid a memory leak. */
++   if (b->key != key)
++     free (key);
+    FREE (b->data);
+    b->data = value ? savestring (value) : (char *)0;
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 10
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 11
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-012 b/source/a/bash/bash-4.2-patches/bash42-012
new file mode 100644
index 00000000..70f0a56b
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-012
@@ -0,0 +1,151 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-012
+
+Bug-Reported-by:	Rui Santos <rsantos@grupopie.com>
+Bug-Reference-ID:	<4E04C6D0.2020507@grupopie.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-06/msg00079.html
+
+Bug-Description:
+
+When calling the parser to recursively parse a command substitution within
+an arithmetic expansion, the shell overwrote the saved shell input line and
+associated state, resulting in a garbled command.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/parse.y	2011-02-26 19:19:05.000000000 -0500
+--- parse.y	2011-06-24 20:08:22.000000000 -0400
+***************
+*** 3843,3846 ****
+--- 3849,3853 ----
+  {
+    sh_parser_state_t ps;
++   sh_input_line_state_t ls;
+    int orig_ind, nc, sflags;
+    char *ret, *s, *ep, *ostring;
+***************
+*** 3850,3857 ****
+--- 3857,3866 ----
+    ostring = string;
+  
++ /*itrace("xparse_dolparen: size = %d shell_input_line = `%s'", shell_input_line_size, shell_input_line);*/
+    sflags = SEVAL_NONINT|SEVAL_NOHIST|SEVAL_NOFREE;
+    if (flags & SX_NOLONGJMP)
+      sflags |= SEVAL_NOLONGJMP;
+    save_parser_state (&ps);
++   save_input_line_state (&ls);
+  
+    /*(*/
+***************
+*** 3862,3865 ****
+--- 3871,3876 ----
+    restore_parser_state (&ps);
+    reset_parser ();
++   /* reset_parser clears shell_input_line and associated variables */
++   restore_input_line_state (&ls);
+    if (interactive)
+      token_to_read = 0;
+***************
+*** 5909,5912 ****
+--- 5920,5929 ----
+    ps->echo_input_at_read = echo_input_at_read;
+  
++   ps->token = token;
++   ps->token_buffer_size = token_buffer_size;
++   /* Force reallocation on next call to read_token_word */
++   token = 0;
++   token_buffer_size = 0;
++ 
+    return (ps);
+  }
+***************
+*** 5950,5953 ****
+--- 5967,6006 ----
+    expand_aliases = ps->expand_aliases;
+    echo_input_at_read = ps->echo_input_at_read;
++ 
++   FREE (token);
++   token = ps->token;
++   token_buffer_size = ps->token_buffer_size;
++ }
++ 
++ sh_input_line_state_t *
++ save_input_line_state (ls)
++      sh_input_line_state_t *ls;
++ {
++   if (ls == 0)
++     ls = (sh_input_line_state_t *)xmalloc (sizeof (sh_input_line_state_t));
++   if (ls == 0)
++     return ((sh_input_line_state_t *)NULL);
++ 
++   ls->input_line = shell_input_line;
++   ls->input_line_size = shell_input_line_size;
++   ls->input_line_len = shell_input_line_len;
++   ls->input_line_index = shell_input_line_index;
++ 
++   /* force reallocation */
++   shell_input_line = 0;
++   shell_input_line_size = shell_input_line_len = shell_input_line_index = 0;
++ }
++ 
++ void
++ restore_input_line_state (ls)
++      sh_input_line_state_t *ls;
++ {
++   FREE (shell_input_line);
++   shell_input_line = ls->input_line;
++   shell_input_line_size = ls->input_line_size;
++   shell_input_line_len = ls->input_line_len;
++   shell_input_line_index = ls->input_line_index;
++ 
++   set_line_mbstate ();
+  }
+  
+*** ../bash-4.2-patched/shell.h	2011-01-06 22:16:55.000000000 -0500
+--- shell.h	2011-06-24 19:12:25.000000000 -0400
+***************
+*** 137,140 ****
+--- 139,145 ----
+    int *token_state;
+  
++   char *token;
++   int token_buffer_size;
++ 
+    /* input line state -- line number saved elsewhere */
+    int input_line_terminator;
+***************
+*** 167,171 ****
+--- 172,186 ----
+  } sh_parser_state_t;
+  
++ typedef struct _sh_input_line_state_t {
++   char *input_line;
++   int input_line_index;
++   int input_line_size;
++   int input_line_len;
++ } sh_input_line_state_t;
++ 
+  /* Let's try declaring these here. */
+  extern sh_parser_state_t *save_parser_state __P((sh_parser_state_t *));
+  extern void restore_parser_state __P((sh_parser_state_t *));
++ 
++ extern sh_input_line_state_t *save_input_line_state __P((sh_input_line_state_t *));
++ extern void restore_input_line_state __P((sh_input_line_state_t *));
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 11
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 12
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-013 b/source/a/bash/bash-4.2-patches/bash42-013
new file mode 100644
index 00000000..5bb186b3
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-013
@@ -0,0 +1,52 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-013
+
+Bug-Reported-by:	Marten Wikstrom <marten.wikstrom@keystream.se>
+Bug-Reference-ID:	<BANLkTikKECAh94ZEX68iQvxYuPeEM_xoSQ@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-05/msg00049.html
+
+Bug-Description:
+
+An off-by-one error caused the shell to skip over CTLNUL characters,
+which are used internally to mark quoted null strings.  The effect
+was to have stray 0x7f characters left after expanding words like
+""""""""aa.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2011-03-06 14:11:11.000000000 -0500
+--- subst.c	2011-05-11 11:23:33.000000000 -0400
+***************
+*** 3707,3711 ****
+  	}
+        else if (string[i] == CTLNUL)
+! 	i++;
+  
+        prev_i = i;
+--- 3710,3717 ----
+  	}
+        else if (string[i] == CTLNUL)
+! 	{
+! 	  i++;
+! 	  continue;
+! 	}
+  
+        prev_i = i;
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 12
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 13
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-014 b/source/a/bash/bash-4.2-patches/bash42-014
new file mode 100644
index 00000000..a43271c3
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-014
@@ -0,0 +1,47 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-014
+
+Bug-Reported-by:	Shawn Bohrer <sbohrer@rgmadvisors.com>
+Bug-Reference-ID:	<20110504152320.6E8F28130527@dev1.rgmadvisors.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-05/msg00018.html
+
+Bug-Description:
+
+The regular expression matching operator did not correctly match
+expressions with an embedded ^A.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/pathexp.c	2010-08-13 23:21:57.000000000 -0400
+--- pathexp.c	2011-05-05 16:40:58.000000000 -0400
+***************
+*** 197,201 ****
+  	  if ((qflags & QGLOB_FILENAME) && pathname[i+1] == '/')
+  	    continue;
+! 	  if ((qflags & QGLOB_REGEXP) && ere_char (pathname[i+1]) == 0)
+  	    continue;
+  	  temp[j++] = '\\';
+--- 197,201 ----
+  	  if ((qflags & QGLOB_FILENAME) && pathname[i+1] == '/')
+  	    continue;
+! 	  if (pathname[i+1] != CTLESC && (qflags & QGLOB_REGEXP) && ere_char (pathname[i+1]) == 0)
+  	    continue;
+  	  temp[j++] = '\\';
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 13
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 14
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-015 b/source/a/bash/bash-4.2-patches/bash42-015
new file mode 100644
index 00000000..86558738
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-015
@@ -0,0 +1,81 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-015
+
+Bug-Reported-by:	<dnade.ext@orange-ftgroup.com>
+Bug-Reference-ID:	<728_1312188080_4E3666B0_728_118711_1_3B5D3E0F95CC5C478D6500CDCE8B691F7AAAA4AA3D@PUEXCB2B.nanterre.francetelecom.fr>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-08/msg00000.html
+
+Bug-Description:
+
+When in a context where arithmetic evaluation is not taking place, the
+evaluator should not check for division by 0.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/expr.c	2010-12-21 11:12:13.000000000 -0500
+--- expr.c	2011-08-02 20:58:28.000000000 -0400
+***************
+*** 477,480 ****
+--- 481,492 ----
+        if (special)
+  	{
++ 	  if ((op == DIV || op == MOD) && value == 0)
++ 	    {
++ 	      if (noeval == 0)
++ 		evalerror (_("division by 0"));
++ 	      else
++ 	        value = 1;
++ 	    }
++ 
+  	  switch (op)
+  	    {
+***************
+*** 483,493 ****
+  	      break;
+  	    case DIV:
+- 	      if (value == 0)
+- 		evalerror (_("division by 0"));
+  	      lvalue /= value;
+  	      break;
+  	    case MOD:
+- 	      if (value == 0)
+- 		evalerror (_("division by 0"));
+  	      lvalue %= value;
+  	      break;
+--- 495,501 ----
+***************
+*** 805,809 ****
+  
+        if (((op == DIV) || (op == MOD)) && (val2 == 0))
+! 	evalerror (_("division by 0"));
+  
+        if (op == MUL)
+--- 813,822 ----
+  
+        if (((op == DIV) || (op == MOD)) && (val2 == 0))
+! 	{
+! 	  if (noeval == 0)
+! 	    evalerror (_("division by 0"));
+! 	  else
+! 	    val2 = 1;
+! 	}
+  
+        if (op == MUL)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 14
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 15
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-016 b/source/a/bash/bash-4.2-patches/bash42-016
new file mode 100644
index 00000000..46025888
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-016
@@ -0,0 +1,46 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-016
+
+Bug-Reported-by:	Martin von Gagern <Martin.vGagern@gmx.net>
+Bug-Reference-ID:	<4E43AD9E.8060501@gmx.net>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-08/msg00141.html
+
+Bug-Description:
+
+Bash should not check for mail while executing the `eval' builtin.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/parse.y	Fri Feb 25 12:07:41 2011
+--- parse.y	Thu Aug 11 19:02:26 2011
+***************
+*** 2500,2504 ****
+  	 is the mail alarm reset; nothing takes place in check_mail ()
+  	 except the checking of mail.  Please don't change this. */
+!       if (prompt_is_ps1 && time_to_check_mail ())
+  	{
+  	  check_mail ();
+--- 2498,2502 ----
+  	 is the mail alarm reset; nothing takes place in check_mail ()
+  	 except the checking of mail.  Please don't change this. */
+!       if (prompt_is_ps1 && parse_and_execute_level == 0 && time_to_check_mail ())
+  	{
+  	  check_mail ();
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 15
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 16
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-017 b/source/a/bash/bash-4.2-patches/bash42-017
new file mode 100644
index 00000000..010ed1e5
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-017
@@ -0,0 +1,47 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-017
+
+Bug-Reported-by:	Curtis Doty <Curtis@GreenKey.net>
+Bug-Reference-ID:	<20110621035324.A4F70849F59@mx1.iParadigms.net>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-06/msg00053.html
+
+Bug-Description:
+
+Using `read -a foo' where foo was an already-declared associative array
+caused the shell to die with a segmentation fault.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/read.def	2011-01-04 11:43:36.000000000 -0500
+--- builtins/read.def	2011-06-21 10:31:02.000000000 -0400
+***************
+*** 643,646 ****
+--- 642,651 ----
+  	  return EXECUTION_FAILURE;	/* readonly or noassign */
+  	}
++       if (assoc_p (var))
++ 	{
++           builtin_error (_("%s: cannot convert associative to indexed array"), arrayname);
++ 	  xfree (input_string);
++ 	  return EXECUTION_FAILURE;	/* existing associative array */
++ 	}
+        array_flush (array_cell (var));
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 16
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 17
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-018 b/source/a/bash/bash-4.2-patches/bash42-018
new file mode 100644
index 00000000..5d11dce1
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-018
@@ -0,0 +1,74 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-018
+
+Bug-Reported-by:	Thomas Cort <tcort@minix3.org>
+Bug-Reference-ID:	<BANLkTik-ebGGw3k_1YtB=RyfV1bsqdxC_g@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-06/msg00110.html
+
+Bug-Description:
+
+Bash fails to compile unless JOB_CONTROL is defined.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/execute_cmd.c	2011-02-09 17:32:25.000000000 -0500
+--- execute_cmd.c	2011-11-06 15:12:48.000000000 -0500
+***************
+*** 2197,2200 ****
+--- 2315,2319 ----
+      cmd->flags |= CMD_IGNORE_RETURN;
+  
++ #if defined (JOB_CONTROL)
+    lastpipe_flag = 0;
+    begin_unwind_frame ("lastpipe-exec");
+***************
+*** 2216,2228 ****
+  	  add_unwind_protect (lastpipe_cleanup, lastpipe_jid);
+  	}
+!       cmd->flags |= CMD_LASTPIPE;
+      }	  
+    if (prev >= 0)
+      add_unwind_protect (close, prev);
+  
+    exec_result = execute_command_internal (cmd, asynchronous, prev, pipe_out, fds_to_close);
+  
+    if (lstdin > 0)
+      restore_stdin (lstdin);
+  
+    if (prev >= 0)
+--- 2335,2351 ----
+  	  add_unwind_protect (lastpipe_cleanup, lastpipe_jid);
+  	}
+!       if (cmd)
+! 	cmd->flags |= CMD_LASTPIPE;
+      }	  
+    if (prev >= 0)
+      add_unwind_protect (close, prev);
++ #endif
+  
+    exec_result = execute_command_internal (cmd, asynchronous, prev, pipe_out, fds_to_close);
+  
++ #if defined (JOB_CONTROL)
+    if (lstdin > 0)
+      restore_stdin (lstdin);
++ #endif
+  
+    if (prev >= 0)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 17
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 18
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-019 b/source/a/bash/bash-4.2-patches/bash42-019
new file mode 100644
index 00000000..5fce40ae
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-019
@@ -0,0 +1,47 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-019
+
+Bug-Reported-by:	Diego Augusto Molina <diegoaugustomolina@gmail.com>
+Bug-Reference-ID:	<CAGOxLdHcSQu3ck9Qy3pRjj_NBU5tAPSAvNm-95-nLQ9Szwb6aA@mail.gmail.com>
+Bug-Reference-URL:	lists.gnu.org/archive/html/bug-bash/2011-09/msg00047.html
+
+Bug-Description:
+
+Using `declare' with attributes and an invalid array variable name or
+assignment reference resulted in a segmentation fault instead of a
+declaration error.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/declare.def	2010-05-30 18:25:21.000000000 -0400
+--- builtins/declare.def	2011-09-15 15:20:20.000000000 -0400
+***************
+*** 514,517 ****
+--- 514,522 ----
+  	      var = assign_array_element (name, value, 0);	/* XXX - not aflags */
+  	      *subscript_start = '\0';
++ 	      if (var == 0)	/* some kind of assignment error */
++ 		{
++ 		  assign_error++;
++ 		  NEXT_VARIABLE ();
++ 		}
+  	    }
+  	  else if (simple_array_assign)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 18
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 19
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-020 b/source/a/bash/bash-4.2-patches/bash42-020
new file mode 100644
index 00000000..a1dd0443
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-020
@@ -0,0 +1,60 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-020
+
+Bug-Reported-by:	Vincent Sheffer <vince.sheffer@apisphere.com>
+Bug-Reference-ID:	<F13C1C4F-C44C-4071-BFED-4BB6D13CF92F@apisphere.com>
+Bug-Reference-URL:	https://lists.gnu.org/archive/html/bug-readline/2011-08/msg00000.html
+
+Bug-Description:
+
+The shared object helper script needs to be updated for Mac OS X 10.7
+(Lion, darwin11).
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/support/shobj-conf	2009-10-28 09:20:21.000000000 -0400
+--- support/shobj-conf	2011-08-27 13:25:23.000000000 -0400
+***************
+*** 158,162 ****
+  
+  # Darwin/MacOS X
+! darwin[89]*|darwin10*)
+  	SHOBJ_STATUS=supported
+  	SHLIB_STATUS=supported
+--- 172,176 ----
+  
+  # Darwin/MacOS X
+! darwin[89]*|darwin1[012]*)
+  	SHOBJ_STATUS=supported
+  	SHLIB_STATUS=supported
+***************
+*** 187,191 ****
+  
+  	case "${host_os}" in
+! 	darwin[789]*|darwin10*)	SHOBJ_LDFLAGS=''
+  			SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
+  			;;
+--- 201,205 ----
+  
+  	case "${host_os}" in
+! 	darwin[789]*|darwin1[012]*)	SHOBJ_LDFLAGS=''
+  			SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
+  			;;
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 19
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 20
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-021 b/source/a/bash/bash-4.2-patches/bash42-021
new file mode 100644
index 00000000..b6153c78
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-021
@@ -0,0 +1,61 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-021
+
+Bug-Reported-by:	Dan Douglas <ormaaj@gmail.com>
+Bug-Reference-ID:	<4585554.nZWb4q7YoZ@smorgbox>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-12/msg00084.html
+
+Bug-Description:
+
+Using `read -N' to assign values to an array can result in NUL values being
+assigned to some array elements.  These values cause seg faults when referenced
+later.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/read.def	2011-11-21 18:03:38.000000000 -0500
+--- builtins/read.def	2011-12-19 19:52:12.000000000 -0500
+***************
+*** 738,742 ****
+  	    }
+  	  else
+! 	    var = bind_read_variable (varname, t);
+  	}
+        else
+--- 775,779 ----
+  	    }
+  	  else
+! 	    var = bind_read_variable (varname, t ? t : "");
+  	}
+        else
+***************
+*** 799,803 ****
+      }
+    else
+!     var = bind_read_variable (list->word->word, input_string);
+  
+    if (var)
+--- 836,840 ----
+      }
+    else
+!     var = bind_read_variable (list->word->word, input_string ? input_string : "");
+  
+    if (var)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 20
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 21
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-022 b/source/a/bash/bash-4.2-patches/bash42-022
new file mode 100644
index 00000000..0067b133
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-022
@@ -0,0 +1,61 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-022
+
+Bug-Reported-by:	Gregory Margo <gmargo@pacbell.net>
+Bug-Reference-ID:	<20110727174529.GA3333@pacbell.net>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-07/msg00102.html
+
+Bug-Description:
+
+The return value from lseek is `off_t'.  This can cause corrupted return
+values when the file offset is greater than 2**31 - 1.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/sh/zread.c	Mon Mar  2 08:54:45 2009
+--- lib/sh/zread.c	Thu Jul 28 18:16:53 2011
+***************
+*** 161,166 ****
+       int fd;
+  {
+!   off_t off;
+!   int r;
+  
+    off = lused - lind;
+--- 161,165 ----
+       int fd;
+  {
+!   off_t off, r;
+  
+    off = lused - lind;
+***************
+*** 169,173 ****
+      r = lseek (fd, -off, SEEK_CUR);
+  
+!   if (r >= 0)
+      lused = lind = 0;
+  }
+--- 168,172 ----
+      r = lseek (fd, -off, SEEK_CUR);
+  
+!   if (r != -1)
+      lused = lind = 0;
+  }
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 21
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 22
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-023 b/source/a/bash/bash-4.2-patches/bash42-023
new file mode 100644
index 00000000..4f204efb
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-023
@@ -0,0 +1,62 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-023
+
+Bug-Reported-by:	Ewan Mellor <Ewan.Mellor@eu.citrix.com>
+Bug-Reference-ID:	<6005BE083BF501439A84DC3523BAC82DC4B964FD12@LONPMAILBOX01.citrite.net>
+Bug-Reference-URL:	
+
+Bug-Description:
+
+Under some circumstances, an exit trap triggered by a bad substitution
+error when errexit is enabled will cause the shell to exit with an
+incorrect exit status (0).
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2011-11-21 12:04:38.000000000 -0500
+--- subst.c	2012-02-08 13:36:28.000000000 -0500
+***************
+*** 7275,7278 ****
+--- 7281,7285 ----
+      case '\0':
+      bad_substitution:
++       last_command_exit_value = EXECUTION_FAILURE;
+        report_error (_("%s: bad substitution"), string ? string : "??");
+        FREE (value);
+*** ../bash-4.2-patched/error.c	2009-08-21 22:31:31.000000000 -0400
+--- error.c	2012-02-25 15:54:40.000000000 -0500
+***************
+*** 201,205 ****
+    va_end (args);
+    if (exit_immediately_on_error)
+!     exit_shell (1);
+  }
+  
+--- 201,209 ----
+    va_end (args);
+    if (exit_immediately_on_error)
+!     {
+!       if (last_command_exit_value == 0)
+! 	last_command_exit_value = 1;
+!       exit_shell (last_command_exit_value);
+!     }
+  }
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 22
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 23
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-024 b/source/a/bash/bash-4.2-patches/bash42-024
new file mode 100644
index 00000000..b7b1158b
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-024
@@ -0,0 +1,45 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-024
+
+Bug-Reported-by:	Jim Avera <james_avera@yahoo.com>
+Bug-Reference-ID:	<4F29E07A.80405@yahoo.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-02/msg00001.html
+
+Bug-Description:
+
+When `printf -v' is used to set an array element, the format string contains
+`%b', and the corresponding argument is the empty string, the buffer used
+to store the value to be assigned can be NULL, which results in NUL being
+assigned to the array element.  This causes a seg fault when it's used later.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/printf.def	2011-02-25 12:07:41.000000000 -0500
+--- builtins/printf.def	2012-02-02 08:37:12.000000000 -0500
+***************
+*** 256,259 ****
+--- 257,262 ----
+  	    {
+  	      vflag = 1;
++ 	      if (vbsize == 0)
++ 		vbuf = xmalloc (vbsize = 16);
+  	      vblen = 0;
+  	      if (vbuf)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 23
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 24
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-025 b/source/a/bash/bash-4.2-patches/bash42-025
new file mode 100644
index 00000000..34ac3430
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-025
@@ -0,0 +1,143 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-025
+
+Bug-Reported-by:	Bill Gradwohl <bill@ycc.com>
+Bug-Reference-ID:	<CAFyvKis-UfuOWr5THBRKh=vYHDoKEEgdW8hN1RviTuYQ00Lu5A@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/help-bash/2012-03/msg00078.html
+
+Bug-Description:
+
+When used in a shell function, `declare -g -a array=(compound assignment)'
+creates a local variable instead of a global one.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/command.h	2010-08-02 19:36:51.000000000 -0400
+--- command.h	2012-04-01 12:38:35.000000000 -0400
+***************
+*** 98,101 ****
+--- 98,102 ----
+  #define W_ASSIGNASSOC	0x400000	/* word looks like associative array assignment */
+  #define W_ARRAYIND	0x800000	/* word is an array index being expanded */
++ #define W_ASSNGLOBAL	0x1000000	/* word is a global assignment to declare (declare/typeset -g) */
+  
+  /* Possible values for subshell_environment */
+*** ../bash-4.2-patched/execute_cmd.c	2011-11-21 18:03:41.000000000 -0500
+--- execute_cmd.c	2012-04-01 12:42:03.000000000 -0400
+***************
+*** 3581,3585 ****
+    WORD_LIST *w;
+    struct builtin *b;
+!   int assoc;
+  
+    if (words == 0)
+--- 3581,3585 ----
+    WORD_LIST *w;
+    struct builtin *b;
+!   int assoc, global;
+  
+    if (words == 0)
+***************
+*** 3587,3591 ****
+  
+    b = 0;
+!   assoc = 0;
+  
+    for (w = words; w; w = w->next)
+--- 3587,3591 ----
+  
+    b = 0;
+!   assoc = global = 0;
+  
+    for (w = words; w; w = w->next)
+***************
+*** 3604,3607 ****
+--- 3604,3609 ----
+  	if (assoc)
+  	  w->word->flags |= W_ASSIGNASSOC;
++ 	if (global)
++ 	  w->word->flags |= W_ASSNGLOBAL;
+  #endif
+        }
+***************
+*** 3609,3613 ****
+      /* Note that we saw an associative array option to a builtin that takes
+         assignment statements.  This is a bit of a kludge. */
+!     else if (w->word->word[0] == '-' && strchr (w->word->word, 'A'))
+        {
+  	if (b == 0)
+--- 3611,3618 ----
+      /* Note that we saw an associative array option to a builtin that takes
+         assignment statements.  This is a bit of a kludge. */
+!     else if (w->word->word[0] == '-' && (strchr (w->word->word+1, 'A') || strchr (w->word->word+1, 'g')))
+! #else
+!     else if (w->word->word[0] == '-' && strchr (w->word->word+1, 'g'))
+! #endif
+        {
+  	if (b == 0)
+***************
+*** 3619,3626 ****
+  	      words->word->flags |= W_ASSNBLTIN;
+  	  }
+! 	if (words->word->flags & W_ASSNBLTIN)
+  	  assoc = 1;
+        }
+- #endif
+  }
+  
+--- 3624,3632 ----
+  	      words->word->flags |= W_ASSNBLTIN;
+  	  }
+! 	if ((words->word->flags & W_ASSNBLTIN) && strchr (w->word->word+1, 'A'))
+  	  assoc = 1;
++ 	if ((words->word->flags & W_ASSNBLTIN) && strchr (w->word->word+1, 'g'))
++ 	  global = 1;
+        }
+  }
+  
+*** ../bash-4.2-patched/subst.c	2012-03-11 17:35:13.000000000 -0400
+--- subst.c	2012-04-01 12:38:35.000000000 -0400
+***************
+*** 367,370 ****
+--- 367,375 ----
+        fprintf (stderr, "W_ASSNBLTIN%s", f ? "|" : "");
+      }
++   if (f & W_ASSNGLOBAL)
++     {
++       f &= ~W_ASSNGLOBAL;
++       fprintf (stderr, "W_ASSNGLOBAL%s", f ? "|" : "");
++     }
+    if (f & W_COMPASSIGN)
+      {
+***************
+*** 2804,2808 ****
+    else if (assign_list)
+      {
+!       if (word->flags & W_ASSIGNARG)
+  	aflags |= ASS_MKLOCAL;
+        if (word->flags & W_ASSIGNASSOC)
+--- 2809,2813 ----
+    else if (assign_list)
+      {
+!       if ((word->flags & W_ASSIGNARG) && (word->flags & W_ASSNGLOBAL) == 0)
+  	aflags |= ASS_MKLOCAL;
+        if (word->flags & W_ASSIGNASSOC)
+
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 24
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 25
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-026 b/source/a/bash/bash-4.2-patches/bash42-026
new file mode 100644
index 00000000..e15d7480
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-026
@@ -0,0 +1,58 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-026
+
+Bug-Reported-by:	Greg Wooledge <wooledg@eeg.ccf.org>
+Bug-Reference-ID:	<20120425180443.GO22241@eeg.ccf.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-04/msg00172.html
+
+Bug-Description:
+
+The `lastpipe' option does not behave correctly on machines where the
+open file limit is less than 256.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/execute_cmd.c	2011-11-21 12:04:47.000000000 -0500
+--- execute_cmd.c	2012-04-26 11:09:30.000000000 -0400
+***************
+*** 2206,2210 ****
+    if (lastpipe_opt && job_control == 0 && asynchronous == 0 && pipe_out == NO_PIPE && prev > 0)
+      {
+!       lstdin = move_to_high_fd (0, 0, 255);
+        if (lstdin > 0)
+  	{
+--- 2325,2329 ----
+    if (lastpipe_opt && job_control == 0 && asynchronous == 0 && pipe_out == NO_PIPE && prev > 0)
+      {
+!       lstdin = move_to_high_fd (0, 1, -1);
+        if (lstdin > 0)
+  	{
+***************
+*** 2252,2256 ****
+--- 2371,2377 ----
+      }
+  
++ #if defined (JOB_CONTROL)
+    discard_unwind_frame ("lastpipe-exec");
++ #endif
+  
+    return (exec_result);
+
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 25
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 26
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-027 b/source/a/bash/bash-4.2-patches/bash42-027
new file mode 100644
index 00000000..c0c5d3f8
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-027
@@ -0,0 +1,47 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-027
+
+Bug-Reported-by:	Mike Frysinger <vapier@gentoo.org>
+Bug-Reference-ID:	<201204211243.30163.vapier@gentoo.org>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-04/msg00134.html
+
+Bug-Description:
+
+When the `extglob' shell option is enabled, pattern substitution does not
+work correctly in the presence of multibyte characters.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2012-03-11 17:52:57.000000000 -0400
+--- subst.c	2012-04-22 16:19:10.000000000 -0400
+***************
+*** 4167,4171 ****
+  #if defined (EXTENDED_GLOB)
+    if (extended_glob)
+!     simple |= (wpat[1] != L'(' || (wpat[0] != L'*' && wpat[0] != L'?' && wpat[0] != L'+' && wpat[0] != L'!' && wpat[0] != L'@')); /*)*/
+  #endif
+  
+--- 4167,4171 ----
+  #if defined (EXTENDED_GLOB)
+    if (extended_glob)
+!     simple &= (wpat[1] != L'(' || (wpat[0] != L'*' && wpat[0] != L'?' && wpat[0] != L'+' && wpat[0] != L'!' && wpat[0] != L'@')); /*)*/
+  #endif
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 26
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 27
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-028 b/source/a/bash/bash-4.2-patches/bash42-028
new file mode 100644
index 00000000..fa3be3b4
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-028
@@ -0,0 +1,52 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-028
+
+Bug-Reported-by:	Mark Edgar <medgar123@gmail.com>
+Bug-Reference-ID:	<CABHMh_3d+ZgO_zaEtYXPwK4P7tC0ghZ4g=Ue_TRpsEMf5YDsqw@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-03/msg00109.html
+
+Bug-Description:
+
+When using a word expansion for which the right hand side is evaluated,
+certain expansions of quoted null strings include spurious ^? characters.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2012-03-11 17:35:13.000000000 -0400
+--- subst.c	2012-03-20 19:30:13.000000000 -0400
+***************
+*** 5810,5813 ****
+--- 5810,5823 ----
+        if (qdollaratp && ((hasdol && quoted) || l->next))
+  	*qdollaratp = 1;
++       /* If we have a quoted null result (QUOTED_NULL(temp)) and the word is
++ 	 a quoted null (l->next == 0 && QUOTED_NULL(l->word->word)), the
++ 	 flags indicate it (l->word->flags & W_HASQUOTEDNULL), and the
++ 	 expansion is quoted (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
++ 	 (which is more paranoia than anything else), we need to return the
++ 	 quoted null string and set the flags to indicate it. */
++       if (l->next == 0 && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && QUOTED_NULL(temp) && QUOTED_NULL(l->word->word) && (l->word->flags & W_HASQUOTEDNULL))
++ 	{
++ 	  w->flags |= W_HASQUOTEDNULL;
++ 	}
+        dispose_words (l);
+      }
+
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 27
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 28
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-029 b/source/a/bash/bash-4.2-patches/bash42-029
new file mode 100644
index 00000000..c51704ca
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-029
@@ -0,0 +1,524 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-029
+
+Bug-Reported-by:	"Michael Kalisz" <michael@kalisz.homelinux.net>
+Bug-Reference-ID:	<50241.78.69.11.112.1298585641.squirrel@kalisz.homelinux.net>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-02/msg00274.html
+
+Bug-Description:
+
+Bash-4.2 tries to leave completed directory names as the user typed them,
+without expanding them to a full pathname.  One effect of this is that
+shell variables used in pathnames being completed (e.g., $HOME) are left
+unchanged, but the `$' is quoted by readline because it is a special
+character to the shell.
+
+This patch introduces two things:
+
+1.  A new shell option, `direxpand', which, if set, attempts to emulate the
+    bash-4.1 behavior of expanding words to full pathnames during
+    completion;
+2.  A set of heuristics that reduce the number of times special characters
+    such as `$' are quoted when the directory name is not expanded.
+
+Patch (apply with `patch -p0'):
+
+diff -NrC 2 ../bash-4.2-patched/bashline.c ./bashline.c
+*** ../bash-4.2-patched/bashline.c	2011-01-16 15:32:47.000000000 -0500
+--- ./bashline.c	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 122,125 ****
+--- 122,128 ----
+  static int bash_push_line __P((void));
+  
++ static rl_icppfunc_t *save_directory_hook __P((void));
++ static void reset_directory_hook __P((rl_icppfunc_t *));
++ 
+  static void cleanup_expansion_error __P((void));
+  static void maybe_make_readline_line __P((char *));
+***************
+*** 244,251 ****
+--- 247,261 ----
+  int dircomplete_spelling = 0;
+  
++ /* Expand directory names during word/filename completion. */
++ int dircomplete_expand = 0;
++ int dircomplete_expand_relpath = 0;
++ 
+  static char *bash_completer_word_break_characters = " \t\n\"'@><=;|&(:";
+  static char *bash_nohostname_word_break_characters = " \t\n\"'><=;|&(:";
+  /* )) */
+  
++ static const char *default_filename_quote_characters = " \t\n\\\"'@<>=;|&()#$`?*[!:{~";	/*}*/
++ static char *custom_filename_quote_characters = 0;
++ 
+  static rl_hook_func_t *old_rl_startup_hook = (rl_hook_func_t *)NULL;
+  
+***************
+*** 502,506 ****
+    /* Tell the completer that we might want to follow symbolic links or
+       do other expansion on directory names. */
+!   rl_directory_rewrite_hook = bash_directory_completion_hook;
+  
+    rl_filename_rewrite_hook = bash_filename_rewrite_hook;
+--- 512,516 ----
+    /* Tell the completer that we might want to follow symbolic links or
+       do other expansion on directory names. */
+!   set_directory_hook ();
+  
+    rl_filename_rewrite_hook = bash_filename_rewrite_hook;
+***************
+*** 530,534 ****
+  
+    /* characters that need to be quoted when appearing in filenames. */
+!   rl_filename_quote_characters = " \t\n\\\"'@<>=;|&()#$`?*[!:{~";	/*}*/
+  
+    rl_filename_quoting_function = bash_quote_filename;
+--- 540,544 ----
+  
+    /* characters that need to be quoted when appearing in filenames. */
+!   rl_filename_quote_characters = default_filename_quote_characters;
+  
+    rl_filename_quoting_function = bash_quote_filename;
+***************
+*** 565,570 ****
+    rl_attempted_completion_function = attempt_shell_completion;
+    rl_completion_entry_function = NULL;
+-   rl_directory_rewrite_hook = bash_directory_completion_hook;
+    rl_ignore_some_completions_function = filename_completion_ignore;
+  }
+  
+--- 575,582 ----
+    rl_attempted_completion_function = attempt_shell_completion;
+    rl_completion_entry_function = NULL;
+    rl_ignore_some_completions_function = filename_completion_ignore;
++   rl_filename_quote_characters = default_filename_quote_characters;
++ 
++   set_directory_hook ();
+  }
+  
+***************
+*** 1280,1283 ****
+--- 1292,1298 ----
+    rl_ignore_some_completions_function = filename_completion_ignore;
+  
++   rl_filename_quote_characters = default_filename_quote_characters;
++   set_directory_hook ();
++ 
+    /* Determine if this could be a command word.  It is if it appears at
+       the start of the line (ignoring preceding whitespace), or if it
+***************
+*** 1592,1595 ****
+--- 1607,1616 ----
+  	  else
+  	    {
++ 	     if (dircomplete_expand && dot_or_dotdot (filename_hint))
++ 		{
++ 		  dircomplete_expand = 0;
++ 		  set_directory_hook ();
++ 		  dircomplete_expand = 1;
++ 		}
+  	      mapping_over = 4;
+  	      goto inner;
+***************
+*** 1792,1795 ****
+--- 1813,1819 ----
+   inner:
+    val = rl_filename_completion_function (filename_hint, istate);
++   if (mapping_over == 4 && dircomplete_expand)
++     set_directory_hook ();
++ 
+    istate = 1;
+  
+***************
+*** 2694,2697 ****
+--- 2718,2767 ----
+  }
+  
++ /* Functions to save and restore the appropriate directory hook */
++ /* This is not static so the shopt code can call it */
++ void
++ set_directory_hook ()
++ {
++   if (dircomplete_expand)
++     {
++       rl_directory_completion_hook = bash_directory_completion_hook;
++       rl_directory_rewrite_hook = (rl_icppfunc_t *)0;
++     }
++   else
++     {
++       rl_directory_rewrite_hook = bash_directory_completion_hook;
++       rl_directory_completion_hook = (rl_icppfunc_t *)0;
++     }
++ }
++ 
++ static rl_icppfunc_t *
++ save_directory_hook ()
++ {
++   rl_icppfunc_t *ret;
++ 
++   if (dircomplete_expand)
++     {
++       ret = rl_directory_completion_hook;
++       rl_directory_completion_hook = (rl_icppfunc_t *)NULL;
++     }
++   else
++     {
++       ret = rl_directory_rewrite_hook;
++       rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL;
++     }
++ 
++   return ret;
++ }
++ 
++ static void
++ restore_directory_hook (hookf)
++      rl_icppfunc_t *hookf;
++ {
++   if (dircomplete_expand)
++     rl_directory_completion_hook = hookf;
++   else
++     rl_directory_rewrite_hook = hookf;
++ }
++ 
+  /* Handle symbolic link references and other directory name
+     expansions while hacking completion.  This should return 1 if it modifies
+***************
+*** 2703,2720 ****
+  {
+    char *local_dirname, *new_dirname, *t;
+!   int return_value, should_expand_dirname;
+    WORD_LIST *wl;
+    struct stat sb;
+  
+!   return_value = should_expand_dirname = 0;
+    local_dirname = *dirname;
+  
+!   if (mbschr (local_dirname, '$'))
+!     should_expand_dirname = 1;
+    else
+      {
+        t = mbschr (local_dirname, '`');
+        if (t && unclosed_pair (local_dirname, strlen (local_dirname), "`") == 0)
+! 	should_expand_dirname = 1;
+      }
+  
+--- 2773,2801 ----
+  {
+    char *local_dirname, *new_dirname, *t;
+!   int return_value, should_expand_dirname, nextch, closer;
+    WORD_LIST *wl;
+    struct stat sb;
+  
+!   return_value = should_expand_dirname = nextch = closer = 0;
+    local_dirname = *dirname;
+  
+!   if (t = mbschr (local_dirname, '$'))
+!     {
+!       should_expand_dirname = '$';
+!       nextch = t[1];
+!       /* Deliberately does not handle the deprecated $[...] arithmetic
+! 	 expansion syntax */
+!       if (nextch == '(')
+! 	closer = ')';
+!       else if (nextch == '{')
+! 	closer = '}';
+!       else
+! 	nextch = 0;
+!     }
+    else
+      {
+        t = mbschr (local_dirname, '`');
+        if (t && unclosed_pair (local_dirname, strlen (local_dirname), "`") == 0)
+! 	should_expand_dirname = '`';
+      }
+  
+***************
+*** 2740,2743 ****
+--- 2821,2841 ----
+  	  dispose_words (wl);
+  	  local_dirname = *dirname;
++ 	  /* XXX - change rl_filename_quote_characters here based on
++ 	     should_expand_dirname/nextch/closer.  This is the only place
++ 	     custom_filename_quote_characters is modified. */
++ 	  if (rl_filename_quote_characters && *rl_filename_quote_characters)
++ 	    {
++ 	      int i, j, c;
++ 	      i = strlen (default_filename_quote_characters);
++ 	      custom_filename_quote_characters = xrealloc (custom_filename_quote_characters, i+1);
++ 	      for (i = j = 0; c = default_filename_quote_characters[i]; i++)
++ 		{
++ 		  if (c == should_expand_dirname || c == nextch || c == closer)
++ 		    continue;
++ 		  custom_filename_quote_characters[j++] = c;
++ 		}
++ 	      custom_filename_quote_characters[j] = '\0';
++ 	      rl_filename_quote_characters = custom_filename_quote_characters;
++ 	    }
+  	}
+        else
+***************
+*** 2759,2762 ****
+--- 2857,2871 ----
+      }
+  
++   /* no_symbolic_links == 0 -> use (default) logical view of the file system.
++      local_dirname[0] == '.' && local_dirname[1] == '/' means files in the
++      current directory (./).
++      local_dirname[0] == '.' && local_dirname[1] == 0 means relative pathnames
++      in the current directory (e.g., lib/sh).
++      XXX - should we do spelling correction on these? */
++ 
++   /* This is test as it was in bash-4.2: skip relative pathnames in current
++      directory.  Change test to
++       (local_dirname[0] != '.' || (local_dirname[1] && local_dirname[1] != '/'))
++      if we want to skip paths beginning with ./ also. */
+    if (no_symbolic_links == 0 && (local_dirname[0] != '.' || local_dirname[1]))
+      {
+***************
+*** 2764,2767 ****
+--- 2873,2885 ----
+        int len1, len2;
+  
++       /* If we have a relative path
++       		(local_dirname[0] != '/' && local_dirname[0] != '.')
++ 	 that is canonical after appending it to the current directory, then
++ 	 	temp1 = temp2+'/'
++ 	 That is,
++ 	 	strcmp (temp1, temp2) == 0
++ 	 after adding a slash to temp2 below.  It should be safe to not
++ 	 change those.
++       */
+        t = get_working_directory ("symlink-hook");
+        temp1 = make_absolute (local_dirname, t);
+***************
+*** 2798,2802 ****
+  	    }
+  	}
+!       return_value |= STREQ (local_dirname, temp2) == 0;
+        free (local_dirname);
+        *dirname = temp2;
+--- 2916,2928 ----
+  	    }
+  	}
+! 
+!       /* dircomplete_expand_relpath == 0 means we want to leave relative
+! 	 pathnames that are unchanged by canonicalization alone.
+! 	 *local_dirname != '/' && *local_dirname != '.' == relative pathname
+! 	 (consistent with general.c:absolute_pathname())
+! 	 temp1 == temp2 (after appending a slash to temp2) means the pathname
+! 	 is not changed by canonicalization as described above. */
+!       if (dircomplete_expand_relpath || ((local_dirname[0] != '/' && local_dirname[0] != '.') && STREQ (temp1, temp2) == 0))
+! 	return_value |= STREQ (local_dirname, temp2) == 0;
+        free (local_dirname);
+        *dirname = temp2;
+***************
+*** 3003,3012 ****
+    orig_func = rl_completion_entry_function;
+    orig_attempt_func = rl_attempted_completion_function;
+-   orig_dir_func = rl_directory_rewrite_hook;
+    orig_ignore_func = rl_ignore_some_completions_function;
+    orig_rl_completer_word_break_characters = rl_completer_word_break_characters;
+    rl_completion_entry_function = rl_filename_completion_function;
+    rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+-   rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL;
+    rl_ignore_some_completions_function = filename_completion_ignore;
+    rl_completer_word_break_characters = " \t\n\"\'";
+--- 3129,3139 ----
+    orig_func = rl_completion_entry_function;
+    orig_attempt_func = rl_attempted_completion_function;
+    orig_ignore_func = rl_ignore_some_completions_function;
+    orig_rl_completer_word_break_characters = rl_completer_word_break_characters;
++ 
++   orig_dir_func = save_directory_hook ();
++ 
+    rl_completion_entry_function = rl_filename_completion_function;
+    rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+    rl_ignore_some_completions_function = filename_completion_ignore;
+    rl_completer_word_break_characters = " \t\n\"\'";
+***************
+*** 3016,3023 ****
+    rl_completion_entry_function = orig_func;
+    rl_attempted_completion_function = orig_attempt_func;
+-   rl_directory_rewrite_hook = orig_dir_func;
+    rl_ignore_some_completions_function = orig_ignore_func;
+    rl_completer_word_break_characters = orig_rl_completer_word_break_characters;
+  
+    return r;
+  }
+--- 3143,3151 ----
+    rl_completion_entry_function = orig_func;
+    rl_attempted_completion_function = orig_attempt_func;
+    rl_ignore_some_completions_function = orig_ignore_func;
+    rl_completer_word_break_characters = orig_rl_completer_word_break_characters;
+  
++   restore_directory_hook (orig_dir_func);
++ 
+    return r;
+  }
+diff -NrC 2 ../bash-4.2-patched/bashline.h ./bashline.h
+*** ../bash-4.2-patched/bashline.h	2009-01-04 14:32:22.000000000 -0500
+--- ./bashline.h	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 34,41 ****
+--- 34,46 ----
+  extern int bash_re_edit __P((char *));
+  
++ extern void bashline_set_event_hook __P((void));
++ extern void bashline_reset_event_hook __P((void));
++ 
+  extern int bind_keyseq_to_unix_command __P((char *));
+  
+  extern char **bash_default_completion __P((const char *, int, int, int, int));
+  
++ void set_directory_hook __P((void));
++ 
+  /* Used by programmable completion code. */
+  extern char *command_word_completion_function __P((const char *, int));
+diff -NrC 2 ../bash-4.2-patched/builtins/shopt.def ./builtins/shopt.def
+*** ../bash-4.2-patched/builtins/shopt.def	2010-07-02 22:42:44.000000000 -0400
+--- ./builtins/shopt.def	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 62,65 ****
+--- 62,69 ----
+  #include "bashgetopt.h"
+  
++ #if defined (READLINE)
++ #  include "../bashline.h"
++ #endif
++ 
+  #if defined (HISTORY)
+  #  include "../bashhist.h"
+***************
+*** 95,99 ****
+  extern int no_empty_command_completion;
+  extern int force_fignore;
+! extern int dircomplete_spelling;
+  
+  extern int enable_hostname_completion __P((int));
+--- 99,103 ----
+  extern int no_empty_command_completion;
+  extern int force_fignore;
+! extern int dircomplete_spelling, dircomplete_expand;
+  
+  extern int enable_hostname_completion __P((int));
+***************
+*** 122,125 ****
+--- 126,133 ----
+  #endif
+  
++ #if defined (READLINE)
++ static int shopt_set_complete_direxpand __P((char *, int));
++ #endif
++ 
+  static int shopt_login_shell;
+  static int shopt_compat31;
+***************
+*** 151,154 ****
+--- 159,163 ----
+    { "compat41", &shopt_compat41, set_compatibility_level },
+  #if defined (READLINE)
++   { "direxpand", &dircomplete_expand, shopt_set_complete_direxpand },
+    { "dirspell", &dircomplete_spelling, (shopt_set_func_t *)NULL },
+  #endif
+***************
+*** 536,539 ****
+--- 545,559 ----
+  }
+  
++ #if defined (READLINE)
++ static int
++ shopt_set_complete_direxpand (option_name, mode)
++      char *option_name;
++      int mode;
++ {
++   set_directory_hook ();
++   return 0;
++ }
++ #endif
++ 
+  #if defined (RESTRICTED_SHELL)
+  /* Don't allow the value of restricted_shell to be modified. */
+Binary files ../bash-4.2-patched/doc/._bashref.pdf and ./doc/._bashref.pdf differ
+diff -NrC 2 ../bash-4.2-patched/doc/bash.1 ./doc/bash.1
+*** ../bash-4.2-patched/doc/bash.1	2011-01-16 15:31:39.000000000 -0500
+--- ./doc/bash.1	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 8949,8952 ****
+--- 8949,8962 ----
+  The default bash behavior remains as in previous versions.
+  .TP 8
++ .B direxpand
++ If set,
++ .B bash
++ replaces directory names with the results of word expansion when performing
++ filename completion.  This changes the contents of the readline editing
++ buffer.
++ If not set,
++ .B bash
++ attempts to preserve what the user typed.
++ .TP 8
+  .B dirspell
+  If set,
+diff -NrC 2 ../bash-4.2-patched/doc/bashref.texi ./doc/bashref.texi
+*** ../bash-4.2-patched/doc/bashref.texi	2011-01-16 15:31:57.000000000 -0500
+--- ./doc/bashref.texi	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 4536,4539 ****
+--- 4536,4546 ----
+  The default Bash behavior remains as in previous versions.
+  
++ @item direxpand
++ If set, Bash
++ replaces directory names with the results of word expansion when performing
++ filename completion.  This changes the contents of the readline editing
++ buffer.
++ If not set, Bash attempts to preserve what the user typed.
++ 
+  @item dirspell
+  If set, Bash
+diff -NrC 2 ../bash-4.2-patched/tests/shopt.right ./tests/shopt.right
+*** ../bash-4.2-patched/tests/shopt.right	2010-07-02 23:36:30.000000000 -0400
+--- ./tests/shopt.right	2012-05-07 16:27:18.000000000 -0400
+***************
+*** 13,16 ****
+--- 13,17 ----
+  shopt -u compat40
+  shopt -u compat41
++ shopt -u direxpand
+  shopt -u dirspell
+  shopt -u dotglob
+***************
+*** 69,72 ****
+--- 70,74 ----
+  shopt -u compat40
+  shopt -u compat41
++ shopt -u direxpand
+  shopt -u dirspell
+  shopt -u dotglob
+***************
+*** 102,105 ****
+--- 104,108 ----
+  compat40       	off
+  compat41       	off
++ direxpand      	off
+  dirspell       	off
+  dotglob        	off
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 28
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 29
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-030 b/source/a/bash/bash-4.2-patches/bash42-030
new file mode 100644
index 00000000..261a619b
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-030
@@ -0,0 +1,178 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-030
+
+Bug-Reported-by:	Roman Rakus <rrakus@redhat.com>
+Bug-Reference-ID:	<4D7DD91E.7040808@redhat.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2011-03/msg00126.html
+
+Bug-Description:
+
+When attempting to glob strings in a multibyte locale, and those strings
+contain invalid multibyte characters that cause mbsnrtowcs to return 0,
+the globbing code loops infinitely.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/glob/xmbsrtowcs.c	2010-05-30 18:36:27.000000000 -0400
+--- lib/glob/xmbsrtowcs.c	2011-03-22 16:06:47.000000000 -0400
+***************
+*** 36,39 ****
+--- 36,41 ----
+  #if HANDLE_MULTIBYTE
+  
++ #define WSBUF_INC 32
++ 
+  #ifndef FREE
+  #  define FREE(x)	do { if (x) free (x); } while (0)
+***************
+*** 149,153 ****
+    size_t wcnum;		/* Number of wide characters in WSBUF */
+    mbstate_t state;	/* Conversion State */
+!   size_t wcslength;	/* Number of wide characters produced by the conversion. */
+    const char *end_or_backslash;
+    size_t nms;	/* Number of multibyte characters to convert at one time. */
+--- 151,155 ----
+    size_t wcnum;		/* Number of wide characters in WSBUF */
+    mbstate_t state;	/* Conversion State */
+!   size_t n, wcslength;	/* Number of wide characters produced by the conversion. */
+    const char *end_or_backslash;
+    size_t nms;	/* Number of multibyte characters to convert at one time. */
+***************
+*** 172,176 ****
+        tmp_p = p;
+        tmp_state = state;
+!       wcslength = mbsnrtowcs(NULL, &tmp_p, nms, 0, &tmp_state);
+  
+        /* Conversion failed. */
+--- 174,189 ----
+        tmp_p = p;
+        tmp_state = state;
+! 
+!       if (nms == 0 && *p == '\\')	/* special initial case */
+! 	nms = wcslength = 1;
+!       else
+! 	wcslength = mbsnrtowcs (NULL, &tmp_p, nms, 0, &tmp_state);
+! 
+!       if (wcslength == 0)
+! 	{
+! 	  tmp_p = p;		/* will need below */
+! 	  tmp_state = state;
+! 	  wcslength = 1;	/* take a single byte */
+! 	}
+  
+        /* Conversion failed. */
+***************
+*** 187,191 ****
+  	  wchar_t *wstmp;
+  
+! 	  wsbuf_size = wcnum+wcslength+1;	/* 1 for the L'\0' or the potential L'\\' */
+  
+  	  wstmp = (wchar_t *) realloc (wsbuf, wsbuf_size * sizeof (wchar_t));
+--- 200,205 ----
+  	  wchar_t *wstmp;
+  
+! 	  while (wsbuf_size < wcnum+wcslength+1) /* 1 for the L'\0' or the potential L'\\' */
+! 	    wsbuf_size += WSBUF_INC;
+  
+  	  wstmp = (wchar_t *) realloc (wsbuf, wsbuf_size * sizeof (wchar_t));
+***************
+*** 200,207 ****
+  
+        /* Perform the conversion. This is assumed to return 'wcslength'.
+!        * It may set 'p' to NULL. */
+!       mbsnrtowcs(wsbuf+wcnum, &p, nms, wsbuf_size-wcnum, &state);
+  
+!       wcnum += wcslength;
+  
+        if (mbsinit (&state) && (p != NULL) && (*p == '\\'))
+--- 214,229 ----
+  
+        /* Perform the conversion. This is assumed to return 'wcslength'.
+! 	 It may set 'p' to NULL. */
+!       n = mbsnrtowcs(wsbuf+wcnum, &p, nms, wsbuf_size-wcnum, &state);
+  
+!       /* Compensate for taking single byte on wcs conversion failure above. */
+!       if (wcslength == 1 && (n == 0 || n == (size_t)-1))
+! 	{
+! 	  state = tmp_state;
+! 	  p = tmp_p;
+! 	  wsbuf[wcnum++] = *p++;
+! 	}
+!       else
+!         wcnum += wcslength;
+  
+        if (mbsinit (&state) && (p != NULL) && (*p == '\\'))
+***************
+*** 231,236 ****
+     of DESTP and INDICESP are NULL. */
+  
+- #define WSBUF_INC 32
+- 
+  size_t
+  xdupmbstowcs (destp, indicesp, src)
+--- 253,256 ----
+*** ../bash-4.2-patched/lib/glob/glob.c	2009-11-14 18:39:30.000000000 -0500
+--- lib/glob/glob.c	2012-07-07 12:09:56.000000000 -0400
+***************
+*** 201,206 ****
+    size_t pat_n, dn_n;
+  
+    pat_n = xdupmbstowcs (&pat_wc, NULL, pat);
+!   dn_n = xdupmbstowcs (&dn_wc, NULL, dname);
+  
+    ret = 0;
+--- 201,209 ----
+    size_t pat_n, dn_n;
+  
++   pat_wc = dn_wc = (wchar_t *)NULL;
++ 
+    pat_n = xdupmbstowcs (&pat_wc, NULL, pat);
+!   if (pat_n != (size_t)-1)
+!     dn_n = xdupmbstowcs (&dn_wc, NULL, dname);
+  
+    ret = 0;
+***************
+*** 222,225 ****
+--- 225,230 ----
+  	ret = 1;
+      }
++   else
++     ret = skipname (pat, dname, flags);
+  
+    FREE (pat_wc);
+***************
+*** 267,272 ****
+    n = xdupmbstowcs (&wpathname, NULL, pathname);
+    if (n == (size_t) -1)
+!     /* Something wrong. */
+!     return;
+    orig_wpathname = wpathname;
+  
+--- 272,280 ----
+    n = xdupmbstowcs (&wpathname, NULL, pathname);
+    if (n == (size_t) -1)
+!     {
+!       /* Something wrong.  Fall back to single-byte */
+!       udequote_pathname (pathname);
+!       return;
+!     }
+    orig_wpathname = wpathname;
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 29
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 30
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-031 b/source/a/bash/bash-4.2-patches/bash42-031
new file mode 100644
index 00000000..419d4478
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-031
@@ -0,0 +1,80 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-031
+
+Bug-Reported-by:	Max Horn <max@quendi.de>
+Bug-Reference-ID:	<20CC5C60-07C3-4E41-9817-741E48D407C5@quendi.de>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-readline/2012-06/msg00005.html
+
+Bug-Description:
+
+A change between bash-4.1 and bash-4.2 to prevent the readline input hook
+from being called too frequently had the side effect of causing delays
+when reading pasted input on systems such as Mac OS X.  This patch fixes
+those delays while retaining the bash-4.2 behavior.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/readline/input.c	2010-05-30 18:33:01.000000000 -0400
+--- lib/readline/input.c	2012-06-25 21:08:42.000000000 -0400
+***************
+*** 410,414 ****
+  rl_read_key ()
+  {
+!   int c;
+  
+    rl_key_sequence_length++;
+--- 412,416 ----
+  rl_read_key ()
+  {
+!   int c, r;
+  
+    rl_key_sequence_length++;
+***************
+*** 430,441 ****
+  	  while (rl_event_hook)
+  	    {
+! 	      if (rl_gather_tyi () < 0)	/* XXX - EIO */
+  		{
+  		  rl_done = 1;
+  		  return ('\n');
+  		}
+  	      RL_CHECK_SIGNALS ();
+- 	      if (rl_get_char (&c) != 0)
+- 		break;
+  	      if (rl_done)		/* XXX - experimental */
+  		return ('\n');
+--- 432,447 ----
+  	  while (rl_event_hook)
+  	    {
+! 	      if (rl_get_char (&c) != 0)
+! 		break;
+! 		
+! 	      if ((r = rl_gather_tyi ()) < 0)	/* XXX - EIO */
+  		{
+  		  rl_done = 1;
+  		  return ('\n');
+  		}
++ 	      else if (r == 1)			/* read something */
++ 		continue;
++ 
+  	      RL_CHECK_SIGNALS ();
+  	      if (rl_done)		/* XXX - experimental */
+  		return ('\n');
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 30
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 31
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-032 b/source/a/bash/bash-4.2-patches/bash42-032
new file mode 100644
index 00000000..d4f25ca0
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-032
@@ -0,0 +1,75 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-032
+
+Bug-Reported-by:	Ruediger Kuhlmann <RKuhlmann@orga-systems.com>
+Bug-Reference-ID:	<OFDE975207.0C3622E5-ONC12579F3.00361A06-C12579F3.00365E39@orga-systems.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-05/msg00010.html
+
+Bug-Description:
+
+Bash-4.2 has problems with DEL characters in the expanded value of variables
+used in the same quoted string as variables that expand to nothing.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-20120427/subst.c	2012-04-22 16:19:10.000000000 -0400
+--- subst.c	2012-05-07 16:06:35.000000000 -0400
+***************
+*** 8152,8155 ****
+--- 8152,8163 ----
+  	  dispose_word_desc (tword);
+  
++ 	  /* Kill quoted nulls; we will add them back at the end of
++ 	     expand_word_internal if nothing else in the string */
++ 	  if (had_quoted_null && temp && QUOTED_NULL (temp))
++ 	    {
++ 	      FREE (temp);
++ 	      temp = (char *)NULL;
++ 	    }
++ 
+  	  goto add_string;
+  	  break;
+***************
+*** 8556,8560 ****
+        if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+  	tword->flags |= W_QUOTED;
+!       if (had_quoted_null)
+  	tword->flags |= W_HASQUOTEDNULL;
+        list = make_word_list (tword, (WORD_LIST *)NULL);
+--- 8564,8568 ----
+        if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+  	tword->flags |= W_QUOTED;
+!       if (had_quoted_null && QUOTED_NULL (istring))
+  	tword->flags |= W_HASQUOTEDNULL;
+        list = make_word_list (tword, (WORD_LIST *)NULL);
+***************
+*** 8587,8591 ****
+  	  if (word->flags & W_NOEXPAND)
+  	    tword->flags |= W_NOEXPAND;
+! 	  if (had_quoted_null)
+  	    tword->flags |= W_HASQUOTEDNULL;	/* XXX */
+  	  list = make_word_list (tword, (WORD_LIST *)NULL);
+--- 8595,8599 ----
+  	  if (word->flags & W_NOEXPAND)
+  	    tword->flags |= W_NOEXPAND;
+! 	  if (had_quoted_null && QUOTED_NULL (istring))
+  	    tword->flags |= W_HASQUOTEDNULL;	/* XXX */
+  	  list = make_word_list (tword, (WORD_LIST *)NULL);
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 31
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 32
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-033 b/source/a/bash/bash-4.2-patches/bash42-033
new file mode 100644
index 00000000..e58d7286
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-033
@@ -0,0 +1,57 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-033
+
+Bug-Reported-by:	David Leverton <levertond@googlemail.com>
+Bug-Reference-ID:	<4FCCE737.1060603@googlemail.com>
+Bug-Reference-URL:
+
+Bug-Description:
+
+Bash uses a static buffer when expanding the /dev/fd prefix for the test
+and conditional commands, among other uses, when it should use a dynamic
+buffer to avoid buffer overflow.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/sh/eaccess.c	2011-01-08 20:50:10.000000000 -0500
+--- lib/sh/eaccess.c	2012-06-04 21:06:43.000000000 -0400
+***************
+*** 83,86 ****
+--- 83,88 ----
+       struct stat *finfo;
+  {
++   static char *pbuf = 0;
++ 
+    if (*path == '\0')
+      {
+***************
+*** 107,111 ****
+       On most systems, with the notable exception of linux, this is
+       effectively a no-op. */
+!       char pbuf[32];
+        strcpy (pbuf, DEV_FD_PREFIX);
+        strcat (pbuf, path + 8);
+--- 109,113 ----
+       On most systems, with the notable exception of linux, this is
+       effectively a no-op. */
+!       pbuf = xrealloc (pbuf, sizeof (DEV_FD_PREFIX) + strlen (path + 8));
+        strcpy (pbuf, DEV_FD_PREFIX);
+        strcat (pbuf, path + 8);
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 32
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 33
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-034 b/source/a/bash/bash-4.2-patches/bash42-034
new file mode 100644
index 00000000..e4f05e10
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-034
@@ -0,0 +1,46 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-034
+
+Bug-Reported-by:	"Davide Brini" <dave_br@gmx.com>
+Bug-Reference-ID:	<20120604164154.69781EC04B@imaps.oficinas.atrapalo.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-06/msg00030.html
+
+Bug-Description:
+
+In bash-4.2, the history code would inappropriately add a semicolon to
+multi-line compound array assignments when adding them to the history.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/parse.y	2011-11-21 18:03:36.000000000 -0500
+--- parse.y	2012-06-07 12:48:47.000000000 -0400
+***************
+*** 4900,4905 ****
+--- 4916,4924 ----
+        return (current_command_line_count == 2 ? "\n" : "");
+      }
+  
++   if (parser_state & PST_COMPASSIGN)
++     return (" ");
++ 
+    /* First, handle some special cases. */
+    /*(*/
+    /* If we just read `()', assume it's a function definition, and don't
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 33
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 34
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-035 b/source/a/bash/bash-4.2-patches/bash42-035
new file mode 100644
index 00000000..6f0be6f9
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-035
@@ -0,0 +1,66 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-035
+
+Bug-Reported-by:	Dan Douglas <ormaaj@gmail.com>
+Bug-Reference-ID:	<2766482.Ksm3GrSoYi@smorgbox>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-06/msg00071.html
+
+Bug-Description:
+
+When given a number of lines to read, `mapfile -n lines' reads one too many.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/builtins/mapfile.def	2010-05-29 22:09:47.000000000 -0400
+--- builtins/mapfile.def	2012-06-20 09:48:33.000000000 -0400
+***************
+*** 196,206 ****
+    interrupt_immediately++;
+    for (array_index = origin, line_count = 1; 
+!        zgetline (fd, &line, &line_length, unbuffered_read) != -1;
+!        array_index++, line_count++) 
+      {
+-       /* Have we exceeded # of lines to store? */
+-       if (line_count_goal != 0 && line_count > line_count_goal) 
+- 	break;
+- 
+        /* Remove trailing newlines? */
+        if (flags & MAPF_CHOP)
+--- 196,202 ----
+    interrupt_immediately++;
+    for (array_index = origin, line_count = 1; 
+!  	zgetline (fd, &line, &line_length, unbuffered_read) != -1;
+! 	array_index++) 
+      {
+        /* Remove trailing newlines? */
+        if (flags & MAPF_CHOP)
+***************
+*** 218,221 ****
+--- 214,222 ----
+  
+        bind_array_element (entry, array_index, line, 0);
++ 
++       /* Have we exceeded # of lines to store? */
++       line_count++;
++       if (line_count_goal != 0 && line_count > line_count_goal) 
++ 	break;
+      }
+  
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 34
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 35
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-036 b/source/a/bash/bash-4.2-patches/bash42-036
new file mode 100644
index 00000000..73fac408
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-036
@@ -0,0 +1,92 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-036
+
+Bug-Reported-by:	gregrwm <backuppc-users@whitleymott.net>
+Bug-Reference-ID:	<CAD+dB9B4JG+qUwZBQUwiQmVt0j6NDn=DDTxr9R+nkA8DL4KLJA@mail.gmail.com>
+Bug-Reference-URL:	http://lists.gnu.org/archive/html/bug-bash/2012-05/msg00108.html
+
+Bug-Description:
+
+Bash-4.2 produces incorrect word splitting results when expanding
+double-quoted $@ in the same string as and adjacent to other variable
+expansions.  The $@ should be split, the other expansions should not.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/subst.c	2012-05-02 12:02:33.000000000 -0400
+--- subst.c	2012-07-08 21:19:32.000000000 -0400
+***************
+*** 7923,7927 ****
+    /* State flags */
+    int had_quoted_null;
+!   int has_dollar_at;
+    int tflag;
+    int pflags;			/* flags passed to param_expand */
+--- 7923,7927 ----
+    /* State flags */
+    int had_quoted_null;
+!   int has_dollar_at, temp_has_dollar_at;
+    int tflag;
+    int pflags;			/* flags passed to param_expand */
+***************
+*** 8128,8138 ****
+  	    *expanded_something = 1;
+  
+! 	  has_dollar_at = 0;
+  	  pflags = (word->flags & W_NOCOMSUB) ? PF_NOCOMSUB : 0;
+  	  if (word->flags & W_NOSPLIT2)
+  	    pflags |= PF_NOSPLIT2;
+  	  tword = param_expand (string, &sindex, quoted, expanded_something,
+! 			       &has_dollar_at, &quoted_dollar_at,
+  			       &had_quoted_null, pflags);
+  
+  	  if (tword == &expand_wdesc_error || tword == &expand_wdesc_fatal)
+--- 8128,8139 ----
+  	    *expanded_something = 1;
+  
+! 	  temp_has_dollar_at = 0;
+  	  pflags = (word->flags & W_NOCOMSUB) ? PF_NOCOMSUB : 0;
+  	  if (word->flags & W_NOSPLIT2)
+  	    pflags |= PF_NOSPLIT2;
+  	  tword = param_expand (string, &sindex, quoted, expanded_something,
+! 			       &temp_has_dollar_at, &quoted_dollar_at,
+  			       &had_quoted_null, pflags);
++ 	  has_dollar_at += temp_has_dollar_at;
+  
+  	  if (tword == &expand_wdesc_error || tword == &expand_wdesc_fatal)
+***************
+*** 8275,8281 ****
+  	      temp = (char *)NULL;
+  
+! 	      has_dollar_at = 0;
+  	      /* Need to get W_HASQUOTEDNULL flag through this function. */
+! 	      list = expand_word_internal (tword, Q_DOUBLE_QUOTES, 0, &has_dollar_at, (int *)NULL);
+  
+  	      if (list == &expand_word_error || list == &expand_word_fatal)
+--- 8276,8283 ----
+  	      temp = (char *)NULL;
+  
+! 	      temp_has_dollar_at = 0;	/* XXX */
+  	      /* Need to get W_HASQUOTEDNULL flag through this function. */
+! 	      list = expand_word_internal (tword, Q_DOUBLE_QUOTES, 0, &temp_has_dollar_at, (int *)NULL);
+! 	      has_dollar_at += temp_has_dollar_at;
+  
+  	      if (list == &expand_word_error || list == &expand_word_fatal)
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 35
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 36
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash-4.2-patches/bash42-037 b/source/a/bash/bash-4.2-patches/bash42-037
new file mode 100644
index 00000000..a12b8a7e
--- /dev/null
+++ b/source/a/bash/bash-4.2-patches/bash42-037
@@ -0,0 +1,112 @@
+			     BASH PATCH REPORT
+			     =================
+
+Bash-Release:	4.2
+Patch-ID:	bash42-037
+
+Bug-Reported-by:	Jakub Filak
+Bug-Reference-ID:
+Bug-Reference-URL:	https://bugzilla.redhat.com/show_bug.cgi?id=813289
+
+Bug-Description:
+
+Attempting to redo (using `.') the vi editing mode `cc', `dd', or `yy'
+commands leads to an infinite loop.
+
+Patch (apply with `patch -p0'):
+
+*** ../bash-4.2-patched/lib/readline/vi_mode.c	2011-02-25 11:17:02.000000000 -0500
+--- lib/readline/vi_mode.c	2012-06-02 12:24:47.000000000 -0400
+***************
+*** 1235,1243 ****
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+!   else if (vi_redoing)
+      {
+        _rl_vimvcxt->motion = _rl_vi_last_motion;
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+  #if defined (READLINE_CALLBACKS)
+    else if (RL_ISSTATE (RL_STATE_CALLBACK))
+--- 1297,1313 ----
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+!   else if (vi_redoing && _rl_vi_last_motion != 'd')	/* `dd' is special */
+      {
+        _rl_vimvcxt->motion = _rl_vi_last_motion;
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
++   else if (vi_redoing)		/* handle redoing `dd' here */
++     {
++       _rl_vimvcxt->motion = _rl_vi_last_motion;
++       rl_mark = rl_end;
++       rl_beg_of_line (1, key);
++       RL_UNSETSTATE (RL_STATE_VIMOTION);
++       r = vidomove_dispatch (_rl_vimvcxt);
++     }
+  #if defined (READLINE_CALLBACKS)
+    else if (RL_ISSTATE (RL_STATE_CALLBACK))
+***************
+*** 1317,1325 ****
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+!   else if (vi_redoing)
+      {
+        _rl_vimvcxt->motion = _rl_vi_last_motion;
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+  #if defined (READLINE_CALLBACKS)
+    else if (RL_ISSTATE (RL_STATE_CALLBACK))
+--- 1387,1403 ----
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
+!   else if (vi_redoing && _rl_vi_last_motion != 'c')	/* `cc' is special */
+      {
+        _rl_vimvcxt->motion = _rl_vi_last_motion;
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
++   else if (vi_redoing)		/* handle redoing `cc' here */
++     {
++       _rl_vimvcxt->motion = _rl_vi_last_motion;
++       rl_mark = rl_end;
++       rl_beg_of_line (1, key);
++       RL_UNSETSTATE (RL_STATE_VIMOTION);
++       r = vidomove_dispatch (_rl_vimvcxt);
++     }
+  #if defined (READLINE_CALLBACKS)
+    else if (RL_ISSTATE (RL_STATE_CALLBACK))
+***************
+*** 1378,1381 ****
+--- 1456,1472 ----
+        r = rl_domove_motion_callback (_rl_vimvcxt);
+      }
++   else if (vi_redoing && _rl_vi_last_motion != 'y')	/* `yy' is special */
++     {
++       _rl_vimvcxt->motion = _rl_vi_last_motion;
++       r = rl_domove_motion_callback (_rl_vimvcxt);
++     }
++   else if (vi_redoing)			/* handle redoing `yy' here */
++     {
++       _rl_vimvcxt->motion = _rl_vi_last_motion;
++       rl_mark = rl_end;
++       rl_beg_of_line (1, key);
++       RL_UNSETSTATE (RL_STATE_VIMOTION);
++       r = vidomove_dispatch (_rl_vimvcxt);
++     }
+  #if defined (READLINE_CALLBACKS)
+    else if (RL_ISSTATE (RL_STATE_CALLBACK))
+*** ../bash-4.2-patched/patchlevel.h	Sat Jun 12 20:14:48 2010
+--- patchlevel.h	Thu Feb 24 21:41:34 2011
+***************
+*** 26,30 ****
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 36
+  
+  #endif /* _PATCHLEVEL_H_ */
+--- 26,30 ----
+     looks for to find the patch level (for the sccs version string). */
+  
+! #define PATCHLEVEL 37
+  
+  #endif /* _PATCHLEVEL_H_ */
diff --git a/source/a/bash/bash.SlackBuild b/source/a/bash/bash.SlackBuild
index 32ce9a40..ecd37b3c 100755
--- a/source/a/bash/bash.SlackBuild
+++ b/source/a/bash/bash.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,6 +20,9 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2011, 2012  by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
 # Set initial variables:
 CWD=`pwd`
 if [ "$TMP" = "" ]; then
@@ -31,12 +34,14 @@ VERSION=${VERSION:-$(echo bash-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d -
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -48,10 +53,17 @@ elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else
   SLKCFLAGS="-O2"
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 if [ ! -d $TMP ]; then
   mkdir -p $TMP # location to build the source
 fi
@@ -76,12 +88,18 @@ if [ -d $CWD/bash-${VERSION}-patches ]; then
   ( cd $CWD/bash-${VERSION}-patches ; cat bash4?-??? ) | patch -p0 --verbose || exit 1
 fi
 
+# End of preparations
+if echo "$*" | grep -qw -- --prep ; then
+  exit 0
+fi
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --mandir=/usr/man \
   --infodir=/usr/info \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
+
 make -j4 || make || exit 1
 make install DESTDIR=$PKG
 mv $PKG/usr/share/doc $PKG/usr
diff --git a/source/a/btrfs-progs/btrfs-progs.SlackBuild b/source/a/btrfs-progs/btrfs-progs.SlackBuild
index ebbd9a53..99dd753d 100755
--- a/source/a/btrfs-progs/btrfs-progs.SlackBuild
+++ b/source/a/btrfs-progs/btrfs-progs.SlackBuild
@@ -27,13 +27,13 @@ BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
-# Download the btrfs-progs-unstable Git head if there's no tarball:
+# Download the btrfs-progs Git head if there's no tarball:
 if ! /bin/ls $CWD/btrfs-progs*tar* 1> /dev/null 2> /dev/null ; then
-  git clone git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
-  rm -r btrfs-progs-unstable/.git
-  tar cf btrfs-progs-$(date +%Y%m%d).tar btrfs-progs-unstable
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
+  rm -r btrfs-progs/.git
+  tar cf btrfs-progs-$(date +%Y%m%d).tar btrfs-progs
   xz -9 btrfs-progs-$(date +%Y%m%d).tar
-  rm -r $CWD/btrfs-progs-unstable
+  rm -r $CWD/btrfs-progs
 fi
 
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | cut -f 3 -d - | cut -f 1 -d .)}
@@ -56,9 +56,9 @@ rm -rf $PKG
 mkdir -p $PKG
 
 cd $TMP
-rm -rf btrfs-progs-unstable
+rm -rf btrfs-progs
 tar xf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
-cd btrfs-progs-unstable
+cd btrfs-progs
 
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
@@ -77,9 +77,6 @@ find . -perm 555 -exec chmod 755 {} \;
 # Build:
 make $NUMJOBS || make || exit 1
 
-# Build ext* conversion utility:
-make $NUMJOBS convert || make convert || exit 1
-
 # Install:
 make install DESTDIR=$PKG || exit 1
 
diff --git a/source/a/btrfs-progs/slack-desc b/source/a/btrfs-progs/slack-desc
index e9088d05..d53953c8 100644
--- a/source/a/btrfs-progs/slack-desc
+++ b/source/a/btrfs-progs/slack-desc
@@ -11,9 +11,9 @@ btrfs-progs:
 btrfs-progs: Btrfs is a new copy on write filesystem for Linux aimed at implementing
 btrfs-progs: advanced features while focusing on fault tolerance, repair and easy
 btrfs-progs: administration.  Initially developed by Oracle, Btrfs is licensed under
-btrfs-progs: the GPL and open for contribution from anyone.  Btrfs is under heavy
-btrfs-progs: development, and is not suitable for any uses other than benchmarking
-btrfs-progs: and review.  The Btrfs disk format is not yet finalized.
+btrfs-progs: the GPL and open for contribution from anyone.
+btrfs-progs:
+btrfs-progs:
 btrfs-progs:
 btrfs-progs: Btrfs homepage:  http://btrfs.wiki.kernel.org
 btrfs-progs:
diff --git a/source/a/coreutils/coreutils.SlackBuild b/source/a/coreutils/coreutils.SlackBuild
index 86019984..3bd8e521 100755
--- a/source/a/coreutils/coreutils.SlackBuild
+++ b/source/a/coreutils/coreutils.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -90,12 +90,13 @@ zcat $CWD/$PKGNAM.uname.diff.gz | patch -p1 --verbose --backup --suffix=.orig ||
 
 # Compilation with glibc version later than 2.3.2 needs the environment
 # variable DEFAULT_POSIX2_VERSION set to 199209.
-# Without the next line, the coreutils will start complaining about 'obsolete'
+# Without that line, the coreutils will start complaining about 'obsolete'
 # command switches, like "tail -20" will be considered obsolete.
 # This behaviour breaks many other packages... the 'obsolete' parameters are
 # too commonly used to disregard them.  Better to stick with the older more
 # widely accepted standards until things begin to demand the new way.
 
+FORCE_UNSAFE_CONFIGURE=1 \
 CFLAGS="$SLKCFLAGS" \
 DEFAULT_POSIX2_VERSION=199209 \
 ./configure \
@@ -164,10 +165,20 @@ done
 ( cd $PKG/usr/bin ; ln -sf ../../bin/ginstall ginstall )
 ( cd $PKG/usr/man/man1 ; ln -sf install.1 ginstall.1 )
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 rm -f $PKG/usr/info/dir
 gzip -9 $PKG/usr/info/*
diff --git a/source/a/cpio/cpio.32bit.crc.diff b/source/a/cpio/cpio.32bit.crc.diff
new file mode 100644
index 00000000..8ae94e98
--- /dev/null
+++ b/source/a/cpio/cpio.32bit.crc.diff
@@ -0,0 +1,111 @@
+From ccec71ec318fdf739f55858d5bffaf4fd6520036 Mon Sep 17 00:00:00 2001
+From: Sergey Poznyakoff <gray@gnu.org.ua>
+Date: Mon, 20 Feb 2012 17:51:27 +0000
+Subject: Always use 32 bit CRC
+
+* src/cpiohdr.h (cpio_file_stat) <c_chksum>: Change type to
+uint32_t.
+* src/extern.h (crc): Change type to uint32_t.
+* src/global.c: Likewise.
+* src/copyout.c (read_for_checksum): Return uint32_t.
+* src/copyin.c: Fix printf formats.
+---
+diff --git a/src/copyin.c b/src/copyin.c
+index 3ab5dac..3282816 100644
+--- a/src/copyin.c
++++ b/src/copyin.c
+@@ -178,7 +178,7 @@ list_file(struct cpio_file_stat* file_hdr, int in_file_des)
+ #endif
+       if (crc != file_hdr->c_chksum)
+ 	{
+-	  error (0, 0, _("%s: checksum error (0x%lx, should be 0x%lx)"),
++	  error (0, 0, _("%s: checksum error (0x%x, should be 0x%x)"),
+ 		 file_hdr->c_name, crc, file_hdr->c_chksum);
+ 	}
+     }
+@@ -525,7 +525,7 @@ copyin_regular_file (struct cpio_file_stat* file_hdr, int in_file_des)
+       if (archive_format == arf_crcascii)
+ 	{
+ 	  if (crc != file_hdr->c_chksum)
+-	    error (0, 0, _("%s: checksum error (0x%lx, should be 0x%lx)"),
++	    error (0, 0, _("%s: checksum error (0x%x, should be 0x%x)"),
+ 		   file_hdr->c_name, crc, file_hdr->c_chksum);
+ 	}
+       tape_skip_padding (in_file_des, file_hdr->c_filesize);
+@@ -540,7 +540,7 @@ copyin_regular_file (struct cpio_file_stat* file_hdr, int in_file_des)
+   if (archive_format == arf_crcascii)
+     {
+       if (crc != file_hdr->c_chksum)
+-	error (0, 0, _("%s: checksum error (0x%lx, should be 0x%lx)"),
++	error (0, 0, _("%s: checksum error (0x%x, should be 0x%x)"),
+ 	       file_hdr->c_name, crc, file_hdr->c_chksum);
+     }
+ 
+@@ -1436,7 +1436,7 @@ process_copy_in ()
+ 	    tape_skip_padding (in_file_des, file_hdr.c_filesize);
+ 	    if (crc != file_hdr.c_chksum)
+ 	      {
+-		error (0, 0, _("%s: checksum error (0x%lx, should be 0x%lx)"),
++		error (0, 0, _("%s: checksum error (0x%x, should be 0x%x)"),
+ 		       file_hdr.c_name, crc, file_hdr.c_chksum);
+ 	      }
+          /* Debian hack: -v and -V now work with --only-verify-crc.
+diff --git a/src/copyout.c b/src/copyout.c
+index ab6a243..a5a8931 100644
+--- a/src/copyout.c
++++ b/src/copyout.c
+@@ -33,10 +33,10 @@
+ /* Read FILE_SIZE bytes of FILE_NAME from IN_FILE_DES and
+    compute and return a checksum for them.  */
+ 
+-static unsigned long
++static uint32_t
+ read_for_checksum (int in_file_des, int file_size, char *file_name)
+ {
+-  unsigned long crc;
++  uint32_t crc;
+   char buf[BUFSIZ];
+   int bytes_left;
+   int bytes_read;
+diff --git a/src/cpiohdr.h b/src/cpiohdr.h
+index 86ec988..9aa8ed9 100644
+--- a/src/cpiohdr.h
++++ b/src/cpiohdr.h
+@@ -123,7 +123,7 @@ struct cpio_file_stat /* Internal representation of a CPIO header */
+   long c_rdev_maj;
+   long c_rdev_min;
+   size_t c_namesize;
+-  unsigned long c_chksum;
++  uint32_t c_chksum;
+   char *c_name;
+   char *c_tar_linkname;
+ };
+diff --git a/src/extern.h b/src/extern.h
+index be329ae..ef00242 100644
+--- a/src/extern.h
++++ b/src/extern.h
+@@ -75,7 +75,7 @@ extern char *new_media_message_after_number;
+ extern int archive_des;
+ extern char *archive_name;
+ extern char *rsh_command_option;
+-extern unsigned long crc;
++extern uint32_t crc;
+ #ifdef DEBUG_CPIO
+ extern int debug_flag;
+ #endif
+diff --git a/src/global.c b/src/global.c
+index 29e7afc..e08e188 100644
+--- a/src/global.c
++++ b/src/global.c
+@@ -144,7 +144,7 @@ char *archive_name = NULL;
+ char *rsh_command_option = NULL;
+ 
+ /* CRC checksum.  */
+-unsigned long crc;
++uint32_t crc;
+ 
+ /* Input and output buffers.  */
+ char *input_buffer, *output_buffer;
+--
+cgit v0.9.0.2
+
diff --git a/source/a/cpio/cpio.SlackBuild b/source/a/cpio/cpio.SlackBuild
index b078d067..5e3eea05 100755
--- a/source/a/cpio/cpio.SlackBuild
+++ b/source/a/cpio/cpio.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 PKGNAM=cpio
 VERSION=$(ls $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -62,7 +62,7 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
-#zcat $CWD/cpio-2.9.gcc43.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/cpio.32bit.crc.diff.gz | patch -p1 -F 3 --verbose || exit 1
 
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
diff --git a/source/a/cryptsetup/cryptsetup.SlackBuild b/source/a/cryptsetup/cryptsetup.SlackBuild
index 11370fc6..9b874e2a 100755
--- a/source/a/cryptsetup/cryptsetup.SlackBuild
+++ b/source/a/cryptsetup/cryptsetup.SlackBuild
@@ -33,7 +33,7 @@
 # -----------------------------------------------------------------------------
 
 PKGNAM=cryptsetup
-VERSION=${VERSION:-1.2.0}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -121,7 +121,20 @@ if [ -r ChangeLog ]; then
   touch -r ChangeLog $DOCSDIR/ChangeLog
 fi
 
-find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; || true
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/a/cups/cups.SlackBuild b/source/a/cups/cups.SlackBuild
index 7af4bd81..afac9132 100755
--- a/source/a/cups/cups.SlackBuild
+++ b/source/a/cups/cups.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,8 +22,8 @@
 
 # CUPS build script by volkerdi@slackware.com.
 
-VERSION=1.4.6
-BUILD=${BUILD:-1}
+VERSION=1.5.4
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -53,13 +53,11 @@ mkdir -p $TMP $PKG
 cd $TMP
 rm -rf cups-$VERSION
 tar xvf $CWD/cups-$VERSION-source.tar.?z* || exit 1
-cd cups-$VERSION
+cd cups-$VERSION || exit 1
 
-# Fix the USB backend to use either usblp or libusb:
-zcat $CWD/usb-backend-both-usblp-and-libusb.dpatch.gz | patch -p1 --verbose || exit 1
-
-# Fix locking to avoid crashes with OpenSSL:
-zcat $CWD/cups.fix_broken_locking.diff.gz | patch -p1 --verbose || exit 1
+# Fix for CUPS 1.5.4.  Don't reload the obsolete usblp module, as this
+# can cause partial printing with certain printers.
+zcat $CWD/usb-backend-reset-after-job-only-for-specific-devices.patch.gz | patch -p0 --verbose || exit 1
 
 sed -i.orig -e 's#$exec_prefix/lib/cups#$libdir/cups#g' configure
 ./configure \
@@ -78,6 +76,9 @@ mkdir -p $PKG/etc/cups
 mkdir -p $PKG/var/spool
 make BUILDROOT=$PKG install || exit 1
 
+# Hey, what's with the gigantic test files?  Bloat is bad.
+rm -f $PKG/usr/share/cups/ipptool/*.{pdf,ps,jpg}
+
 # I've added so many things like /etc/init.d/ to Slackware that CUPS
 # is now installing init scripts to the Red Hat locations.  We'll move
 # them to the usual locations:
@@ -88,17 +89,6 @@ chmod 644 $PKG/etc/rc.d/rc.cups.new
 # Clear out the additions:
 rm -rf $PKG/etc/init.d $PKG/etc/rc{0,2,3,5}.d
 
-### OBSOLETE.  The USB backend is patched to support usblp again. ###
-## From 1.4.x, CUPS no longer uses usblp, and having the module loaded
-## will interfere with USB printers.  So, we will add a blacklist rule
-## so that the module is not loaded:
-#mkdir -p $PKG/etc/modprobe.d
-#cat << EOF > $PKG/etc/modprobe.d/cups.blacklist.usblp.conf.new
-## Do not load the kernel usblp module, since it interferes with
-## versions of CUPS 1.4.0 and newer:
-#blacklist usblp
-#EOF
-
 # I'm not sure if overwriting this blindly could have ill effects,
 # but it never hurts to play it safe.  According to the dbus-daemon
 # manpage, only files ending in .conf will be used, so there won't
diff --git a/source/a/cups/cups.fix_broken_locking.diff b/source/a/cups/cups.fix_broken_locking.diff
deleted file mode 100644
index 44f97533..00000000
--- a/source/a/cups/cups.fix_broken_locking.diff
+++ /dev/null
@@ -1,256 +0,0 @@
-Submitted By: DJ Lucas <robert AT linuxfromscratch DOT org>
-Date: 2010-09-13
-Initial Package Version: 1.4.4
-Upstream Status: Unknown
-Origin: https://bugzilla.redhat.com/show_bug.cgi?id=553834
-Description: Bug fix for invalid locking with GCrypt.
-
-diff -Naurp cups-1.4.4-orig/cups/http.c cups-1.4.4/cups/http.c
---- cups-1.4.4-orig/cups/http.c	2010-06-16 00:27:41.000000000 -0500
-+++ cups-1.4.4/cups/http.c	2010-09-13 01:27:03.000000000 -0500
-@@ -83,12 +83,10 @@
-  *   http_debug_hex()     - Do a hex dump of a buffer.
-  *   http_field()         - Return the field index for a field name.
-  *   http_read_ssl()      - Read from a SSL/TLS connection.
-- *   http_locking_cb()    - Lock/unlock a thread's mutex.
-  *   http_send()          - Send a request with all fields and the trailing
-  *                          blank line.
-  *   http_setup_ssl()     - Set up SSL/TLS support on a connection.
-  *   http_shutdown_ssl()  - Shut down SSL/TLS on a connection.
-- *   http_threadid_cb()   - Return the current thread ID.
-  *   http_upgrade()       - Force upgrade to TLS encryption.
-  *   http_write()         - Write a buffer to a HTTP connection.
-  *   http_write_chunk()   - Write a chunked buffer.
-@@ -146,19 +144,6 @@ static int		http_setup_ssl(http_t *http)
- static void		http_shutdown_ssl(http_t *http);
- static int		http_upgrade(http_t *http);
- static int		http_write_ssl(http_t *http, const char *buf, int len);
--
--#  ifdef HAVE_GNUTLS
--#    ifdef HAVE_PTHREAD_H
--GCRY_THREAD_OPTION_PTHREAD_IMPL;
--#    endif /* HAVE_PTHREAD_H */
--
--#  elif defined(HAVE_LIBSSL) && defined(HAVE_PTHREAD_H)
--static pthread_mutex_t	*http_locks;	/* OpenSSL lock mutexes */
--
--static void		http_locking_cb(int mode, int type, const char *file,
--					int line);
--static unsigned long	http_threadid_cb(void);
--#  endif /* HAVE_GNUTLS */
- #endif /* HAVE_SSL */
- 
- 
-@@ -1188,22 +1173,21 @@ httpHead(http_t     *http,		/* I - Conne
- void
- httpInitialize(void)
- {
--  static int	initialized = 0;	/* Have we been called before? */
--#ifdef WIN32
--  WSADATA	winsockdata;		/* WinSock data */
--#endif /* WIN32 */
- #ifdef HAVE_LIBSSL
--  int		i;			/* Looping var */
--  unsigned char	data[1024];		/* Seed data */
-+#  ifndef WIN32
-+  struct timeval        curtime;        /* Current time in microseconds */
-+#  endif /* !WIN32 */
-+  int                   i;              /* Looping var */
-+  unsigned char         data[1024];     /* Seed data */
- #endif /* HAVE_LIBSSL */
- 
--
--  if (initialized)
--    return;
--
- #ifdef WIN32
--  WSAStartup(MAKEWORD(2,2), &winsockdata);
-+  WSADATA       winsockdata;            /* WinSock data */
-+
- 
-+  static int    initialized = 0;        /* Has WinSock been initialized? */
-+  if (!initialized)
-+    WSAStartup(MAKEWORD(1,1), &winsockdata);
- #elif !defined(SO_NOSIGPIPE)
-  /*
-   * Ignore SIGPIPE signals...
-@@ -1226,21 +1210,15 @@ httpInitialize(void)
- #endif /* WIN32 */
- 
- #ifdef HAVE_GNUTLS
-- /*
--  * Make sure we handle threading properly...
--  */
--
--#  ifdef HAVE_PTHREAD_H
--  gcry_control(GCRYCTL_SET_THREAD_CBS, &gcry_threads_pthread);
--#  endif /* HAVE_PTHREAD_H */
- 
-  /*
-   * Initialize GNU TLS...
-   */
- 
-   gnutls_global_init();
-+#endif /* HAVE_GNUTLS */
- 
--#elif defined(HAVE_LIBSSL)
-+#ifdef HAVE_LIBSSL
-  /*
-   * Initialize OpenSSL...
-   */
-@@ -1249,33 +1227,21 @@ httpInitialize(void)
-   SSL_library_init();
- 
-  /*
--  * Set the threading callbacks...
--  */
--
--#  ifdef HAVE_PTHREAD_H
--  http_locks = calloc(CRYPTO_num_locks(), sizeof(pthread_mutex_t));
--
--  for (i = 0; i < CRYPTO_num_locks(); i ++)
--    pthread_mutex_init(http_locks + i, NULL);
--
--  CRYPTO_set_id_callback(http_threadid_cb);
--  CRYPTO_set_locking_callback(http_locking_cb);
--#  endif /* HAVE_PTHREAD_H */
--
-- /*
-   * Using the current time is a dubious random seed, but on some systems
-   * it is the best we can do (on others, this seed isn't even used...)
-   */
- 
--  CUPS_SRAND(time(NULL));
-+#  ifdef WIN32
-+#  else
-+  gettimeofday(&curtime, NULL);
-+  srand(curtime.tv_sec + curtime.tv_usec);
-+#  endif /* WIN32 */
- 
-   for (i = 0; i < sizeof(data); i ++)
--    data[i] = CUPS_RAND();
-+    data[i] = rand();
- 
-   RAND_seed(data, sizeof(data));
--#endif /* HAVE_GNUTLS */
--
--  initialized = 1;
-+#endif /* HAVE_LIBSSL */
- }
- 
- 
-@@ -2834,25 +2800,6 @@ http_read_ssl(http_t *http,		/* I - Conn
- #endif /* HAVE_SSL */
- 
- 
--#if defined(HAVE_LIBSSL) && defined(HAVE_PTHREAD_H)
--/*
-- * 'http_locking_cb()' - Lock/unlock a thread's mutex.
-- */
--
--static void
--http_locking_cb(int        mode,	/* I - Lock mode */
--		int        type,	/* I - Lock type */
--		const char *file,	/* I - Source file */
--		int        line)	/* I - Line number */
--{
--  if (mode & CRYPTO_LOCK)
--    pthread_mutex_lock(http_locks + type);
--  else
--    pthread_mutex_unlock(http_locks + type);
--}
--#endif /* HAVE_LIBSSL && HAVE_PTHREAD_H */
--
--
- /*
-  * 'http_send()' - Send a request with all fields and the trailing blank line.
-  */
-@@ -3224,19 +3171,6 @@ http_shutdown_ssl(http_t *http)		/* I - 
- #endif /* HAVE_SSL */
- 
- 
--#if defined(HAVE_LIBSSL) && defined(HAVE_PTHREAD_H)
--/*
-- * 'http_threadid_cb()' - Return the current thread ID.
-- */
--
--static unsigned long			/* O - Thread ID */
--http_threadid_cb(void)
--{
--  return ((unsigned long)pthread_self());
--}
--#endif /* HAVE_LIBSSL && HAVE_PTHREAD_H */
--
--
- #ifdef HAVE_SSL
- /*
-  * 'http_upgrade()' - Force upgrade to TLS encryption.
-diff -Naurp cups-1.4.4-orig/cups/http-private.h cups-1.4.4/cups/http-private.h
---- cups-1.4.4-orig/cups/http-private.h	2010-04-11 23:03:53.000000000 -0500
-+++ cups-1.4.4/cups/http-private.h	2010-09-13 01:27:24.000000000 -0500
-@@ -98,7 +98,6 @@ extern BIO_METHOD *_httpBIOMethods(void)
-  * The GNU TLS library is more of a "bare metal" SSL/TLS library...
-  */
- #    include <gnutls/gnutls.h>
--#    include <gcrypt.h>
- 
- typedef struct
- {
-diff -Naurp cups-1.4.4-orig/scheduler/main.c cups-1.4.4/scheduler/main.c
---- cups-1.4.4-orig/scheduler/main.c	2010-04-23 13:56:34.000000000 -0500
-+++ cups-1.4.4/scheduler/main.c	2010-09-13 01:27:36.000000000 -0500
-@@ -549,8 +549,6 @@ main(int  argc,				/* I - Number of comm
-   * Startup the server...
-   */
- 
--  httpInitialize();
--
-   cupsdStartServer();
- 
-  /*
-diff -Naurp cups-1.4.4-orig/scheduler/server.c cups-1.4.4/scheduler/server.c
---- cups-1.4.4-orig/scheduler/server.c	2010-04-11 23:03:53.000000000 -0500
-+++ cups-1.4.4/scheduler/server.c	2010-09-13 01:27:49.000000000 -0500
-@@ -44,6 +44,42 @@ static int	started = 0;
- void
- cupsdStartServer(void)
- {
-+#ifdef HAVE_LIBSSL
-+  int                   i;              /* Looping var */
-+  struct timeval        curtime;        /* Current time in microseconds */
-+  unsigned char         data[1024];     /* Seed data */
-+#endif /* HAVE_LIBSSL */
-+
-+
-+#ifdef HAVE_LIBSSL
-+ /*
-+  * Initialize the encryption libraries...
-+  */
-+
-+  SSL_library_init();
-+  SSL_load_error_strings();
-+
-+ /*
-+  * Using the current time is a dubious random seed, but on some systems
-+  * it is the best we can do (on others, this seed isn't even used...)
-+  */
-+
-+  gettimeofday(&curtime, NULL);
-+  srand(curtime.tv_sec + curtime.tv_usec);
-+
-+  for (i = 0; i < sizeof(data); i ++)
-+    data[i] = rand(); /* Yes, this is a poor source of random data... */
-+
-+  RAND_seed(&data, sizeof(data));
-+#elif defined(HAVE_GNUTLS)
-+ /*
-+  * Initialize the encryption libraries...
-+  */
-+
-+  gnutls_global_init();
-+#endif /* HAVE_LIBSSL */
-+
-+
-  /*
-   * Create the default security profile...
-   */
diff --git a/source/a/cups/cups.url b/source/a/cups/cups.url
new file mode 100644
index 00000000..fc83aeb6
--- /dev/null
+++ b/source/a/cups/cups.url
@@ -0,0 +1 @@
+http://ftp.easysw.com/pub/cups/1.5.4/cups-1.5.4-source.tar.bz2
diff --git a/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch b/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch
deleted file mode 100644
index 88ae9d07..00000000
--- a/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch
+++ /dev/null
@@ -1,574 +0,0 @@
-#! /bin/sh /usr/share/dpatch/dpatch-run
-## usb-backend-both-usblp-and-libusb.dpatch by  <till.kamppeter@gmail.com>
-##
-## DP: http://www.cups.org/str.php?L3357
-
-@DPATCH@
-diff -urNad cups-1.4.3~/backend/Makefile cups-1.4.3/backend/Makefile
---- cups-1.4.3~/backend/Makefile	2010-04-09 15:56:03.735720821 +0200
-+++ cups-1.4.3/backend/Makefile	2010-04-09 15:56:04.335705387 +0200
-@@ -267,7 +267,7 @@
- 	echo Linking $@...
- 	$(CC) $(LDFLAGS) -o usb usb.o libbackend.a $(LIBUSB) \
- 		$(BACKLIBS) $(LIBS)
--usb.o:	usb.c usb-darwin.c usb-libusb.c usb-unix.c
-+usb.o:	usb.c usb-darwin.c usb-hybrid.c usb-libusb.c usb-unix.c
- 
- 
- #
-diff -urNad cups-1.4.3~/backend/ieee1284.c cups-1.4.3/backend/ieee1284.c
---- cups-1.4.3~/backend/ieee1284.c	2009-12-08 03:13:42.000000000 +0100
-+++ cups-1.4.3/backend/ieee1284.c	2010-04-09 15:56:04.335705387 +0200
-@@ -255,6 +255,7 @@
-     cups_option_t	*values;	/* Keys and values in device ID */
-     const char		*mfg,		/* Manufacturer */
- 			*mdl,		/* Model */
-+			*des,		/* Description */
- 			*sern;		/* Serial number */
-     char		temp[256],	/* Temporary manufacturer string */
- 			*tempptr;	/* Pointer into temp string */
-@@ -285,10 +286,20 @@
-     }
-     else
-     {
--      strlcpy(temp, make_model, sizeof(temp));
-+      /*
-+       * No manufacturer?  Use the model string or description...
-+       */
-+
-+      if (mdl)
-+	_ppdNormalizeMakeAndModel(mdl, temp, sizeof(temp));
-+      else if ((des = cupsGetOption("DESCRIPTION", num_values, values)) != NULL ||
-+	       (des = cupsGetOption("DES", num_values, values)) != NULL)
-+	_ppdNormalizeMakeAndModel(des, temp, sizeof(temp));
-+      else
-+	strlcpy(temp, "Unknown", sizeof(temp));
- 
-       if ((tempptr = strchr(temp, ' ')) != NULL)
--        *tempptr = '\0';
-+	*tempptr = '\0';
- 
-       mfg = temp;
-     }
-diff -urNad cups-1.4.3~/backend/usb-hybrid.c cups-1.4.3/backend/usb-hybrid.c
---- cups-1.4.3~/backend/usb-hybrid.c	1970-01-01 01:00:00.000000000 +0100
-+++ cups-1.4.3/backend/usb-hybrid.c	2010-04-09 15:56:04.345707078 +0200
-@@ -0,0 +1,87 @@
-+/*
-+ * "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $"
-+ *
-+ *   USB port backend for the Common UNIX Printing System (CUPS).
-+ *
-+ *   This file is included from "usb.c" when compiled on Linux.
-+ *
-+ *   Copyright 2007-2008 by Apple Inc.
-+ *   Copyright 1997-2007 by Easy Software Products, all rights reserved.
-+ *
-+ *   These coded instructions, statements, and computer programs are the
-+ *   property of Apple Inc. and are protected by Federal copyright
-+ *   law.  Distribution and use rights are outlined in the file "LICENSE.txt"
-+ *   "LICENSE" which should have been included with this file.  If this
-+ *   file is missing or damaged, see the license at "http://www.cups.org/".
-+ *
-+ *   This file is subject to the Apple OS-Developed Software exception.
-+ *
-+ * Contents:
-+ *
-+ *   print_device() - Print a file to a USB device.
-+ *   list_devices() - List all USB devices.
-+ */
-+
-+/*
-+ * Include necessary headers.
-+ */
-+
-+#include <sys/select.h>
-+
-+/*
-+ * Include the two USB implementations used under Linux ...
-+ */
-+
-+#include "usb-libusb.c"
-+#include "usb-unix.c"
-+
-+/*
-+ * 'print_device()' - Print a file to a USB device.
-+ */
-+
-+int					/* O - Exit status */
-+print_device(const char *uri,		/* I - Device URI */
-+             const char *hostname,	/* I - Hostname/manufacturer */
-+             const char *resource,	/* I - Resource/modelname */
-+	     char       *options,	/* I - Device options/serial number */
-+	     int        print_fd,	/* I - File descriptor to print */
-+	     int        copies,		/* I - Copies to print */
-+	     int	argc,		/* I - Number of command-line arguments (6 or 7) */
-+	     char	*argv[])	/* I - Command-line arguments */
-+{
-+  int result;
-+  for(;;)
-+  {
-+    result = print_device_unix(uri, hostname, resource, options, print_fd,
-+			       copies, argc, argv);
-+    if (result == -1)
-+    {
-+      result = print_device_libusb(uri, hostname, resource, options, print_fd,
-+				   copies, argc, argv);
-+      if (result == -1)
-+	sleep(5);
-+      else
-+	return(result);
-+    }
-+    else
-+      return(result);
-+  }
-+}
-+
-+/*
-+ * 'list_devices()' - List all USB devices.
-+ */
-+
-+void
-+list_devices(void)
-+{
-+  /* Try both discovery methods, each device will appear only under one
-+     of them */
-+  list_devices_libusb();
-+  list_devices_unix();
-+}
-+
-+
-+/*
-+ * End of "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $".
-+ */
-diff -urNad cups-1.4.3~/backend/usb-libusb.c cups-1.4.3/backend/usb-libusb.c
---- cups-1.4.3~/backend/usb-libusb.c	2009-09-11 22:03:31.000000000 +0200
-+++ cups-1.4.3/backend/usb-libusb.c	2010-04-09 15:56:04.345707078 +0200
-@@ -13,16 +13,16 @@
-  *
-  * Contents:
-  *
-- *   list_devices()    - List the available printers.
-- *   print_device()    - Print a file to a USB device.
-+ *   list_devices_libusb()    - List the available printers.
-+ *   print_device_libusb()    - Print a file to a USB device.
-  *   close_device()    - Close the connection to the USB printer.
-  *   find_device()     - Find or enumerate USB printers.
-  *   get_device_id()   - Get the IEEE-1284 device ID for the printer.
-  *   list_cb()         - List USB printers for discovery.
-  *   make_device_uri() - Create a device URI for a USB printer.
-- *   open_device()     - Open a connection to the USB printer.
-+ *   open_device_libusb()     - Open a connection to the USB printer.
-  *   print_cb()        - Find a USB printer for printing.
-- *   side_cb()         - Handle side-channel requests.
-+ *   side_cb_libusb()         - Handle side-channel requests.
-  */
- 
- /*
-@@ -65,30 +65,30 @@
- static char		*make_device_uri(usb_printer_t *printer,
- 			                 const char *device_id,
- 					 char *uri, size_t uri_size);
--static int		open_device(usb_printer_t *printer, int verbose);
-+static int		open_device_libusb(usb_printer_t *printer, int verbose);
- static int		print_cb(usb_printer_t *printer, const char *device_uri,
- 			         const char *device_id, const void *data);
--static ssize_t		side_cb(usb_printer_t *printer, int print_fd);
-+static ssize_t		side_cb_libusb(usb_printer_t *printer, int print_fd);
- 
- 
- /*
-- * 'list_devices()' - List the available printers.
-+ * 'list_devices_libusb()' - List the available printers.
-  */
- 
- void
--list_devices(void)
-+list_devices_libusb(void)
- {
--  fputs("DEBUG: list_devices\n", stderr);
-+  fputs("DEBUG: list_devices_libusb\n", stderr);
-   find_device(list_cb, NULL);
- }
- 
- 
- /*
-- * 'print_device()' - Print a file to a USB device.
-+ * 'print_device_libusb()' - Print a file to a USB device.
-  */
- 
- int					/* O - Exit status */
--print_device(const char *uri,		/* I - Device URI */
-+print_device_libusb(const char *uri,		/* I - Device URI */
-              const char *hostname,	/* I - Hostname/manufacturer */
-              const char *resource,	/* I - Resource/modelname */
- 	     char       *options,	/* I - Device options/serial number */
-@@ -105,19 +105,23 @@
-   struct pollfd	pfds[2];		/* Poll descriptors */
- 
- 
--  fputs("DEBUG: print_device\n", stderr);
-+  fputs("DEBUG: print_device_libusb\n", stderr);
- 
-  /*
-   * Connect to the printer...
-   */
- 
-+#if defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__)
-+  if ((printer = find_device(print_cb, uri)) == NULL)
-+    return(-1);
-+#else
-   while ((printer = find_device(print_cb, uri)) == NULL)
-   {
-     _cupsLangPuts(stderr,
- 		  _("INFO: Waiting for printer to become available...\n"));
-     sleep(5);
-   }
--
-+#endif
- 
-  /*
-   * If we are printing data from a print driver on stdin, ignore SIGTERM
-@@ -189,7 +193,7 @@
- 
-       if (pfds[1].revents & (POLLIN | POLLHUP))
-       {
--        if ((bytes = side_cb(printer, print_fd)) < 0)
-+        if ((bytes = side_cb_libusb(printer, print_fd)) < 0)
- 	  pfds[1].events = 0;		/* Filter has gone away... */
- 	else
-           tbytes += bytes;
-@@ -359,7 +363,7 @@
- 	    printer.iface  = iface;
- 	    printer.handle = NULL;
- 
--            if (!open_device(&printer, data != NULL))
-+            if (!open_device_libusb(&printer, data != NULL))
- 	    {
- 	      if (!get_device_id(&printer, device_id, sizeof(device_id)))
- 	      {
-@@ -583,6 +587,14 @@
-     mfg = tempmfg;
-   }
- 
-+  if (!strncasecmp(mdl, mfg, strlen(mfg)))
-+  {
-+    mdl += strlen(mfg);
-+
-+    while (isspace(*mdl & 255))
-+      mdl ++;
-+    }
-+
-  /*
-   * Generate the device URI from the manufacturer, model, serial number,
-   * and interface number...
-@@ -611,11 +623,11 @@
- 
- 
- /*
-- * 'open_device()' - Open a connection to the USB printer.
-+ * 'open_device_libusb()' - Open a connection to the USB printer.
-  */
- 
- static int				/* O - 0 on success, -1 on error */
--open_device(usb_printer_t *printer,	/* I - Printer */
-+open_device_libusb(usb_printer_t *printer,	/* I - Printer */
-             int           verbose)	/* I - Update connecting-to-device state? */
- {
-   int	number;				/* Configuration/interface/altset numbers */
-@@ -733,16 +745,73 @@
-          const char    *device_id,	/* I - IEEE-1284 device ID */
-          const void    *data)		/* I - User data (make, model, S/N) */
- {
--  return (!strcmp((char *)data, device_uri));
-+  char *uri = (char *)data,
-+       *str1,
-+       *str2,
-+       buf[255],
-+       requested_uri[1024];
-+
-+  /* Work on a copy of uri */
-+  strncpy(requested_uri, uri, sizeof(requested_uri));
-+  requested_uri[sizeof(requested_uri) - 1] = '\0';
-+
-+  /*
-+   * libusb-discovered URIs can have an "interface" specification and this
-+   * never happens for usblp-discovered URIs, so remove the "interface"
-+   * specification from the URI which we are checking currently. This way a
-+   * queue for a usblp-discovered printer can now be accessed via libusb
-+   */
-+  if (((str1 = strstr(requested_uri, "interface=")) == NULL) &&
-+      ((str2 = strstr(device_uri, "interface=")) != NULL))
-+  {
-+    *(str2 - 1) = '\0';
-+  }
-+
-+  /*
-+   * Old URI with "serial=?". Cut this part off and consider this as
-+   * an URI without serial number
-+   */
-+  if ((str1 = strstr(requested_uri, "serial=?")) != NULL)
-+   *(str1 - 1) = '\0';
-+
-+  /*
-+   * Old URI without serial number. Match it also with URIs with serial
-+   * number
-+   */
-+  if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
-+      ((str2 = strstr(device_uri, "serial=")) != NULL))
-+    *(str2 - 1) = '\0';
-+
-+  /*
-+   * libusb-discovered URIs can have a "serial" specification when the
-+   * usblp-discovered URI for the same printer does not have one, as
-+   * with libusb we can discover serial numbers also with other methods
-+   * than only via the device ID. Therefore we accept also a
-+   * usblp-discovered printer without serial number as a match. This we
-+   * do by removing the serial number from the queue's (libusb-discovered)
-+   * URI before comparing. Also warn the user because of the incapability
-+   * of the usblp-based access to distinguish printers by the serial
-+   * number.
-+   */
-+  if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
-+      ((str2 = strstr(device_uri, "serial=")) != NULL))
-+  {
-+    *(str2 - 1) = '\0';
-+    if (backendGetMakeModel(device_id, buf, sizeof(buf)) == 0)
-+      fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please make sure that the \"usblp\" kernel module is always unloaded (and blacklisted) and re-create the queues for these printers. Otherwise CUPS will not be able to distinguish them.\n",
-+	    buf);
-+  }
-+
-+  return (!strcmp(requested_uri, device_uri));
- }
- 
- 
- /*
-- * 'side_cb()' - Handle side-channel requests.
-+ * 'side_cb_libusb()' - Handle side-channel requests.
-  */
- 
- static ssize_t				/* O - Number of bytes written */
--side_cb(usb_printer_t *printer,		/* I - Printer */
-+side_cb_libusb(usb_printer_t *printer,		/* I - Printer */
-         int           print_fd)		/* I - File to print */
- {
-   ssize_t		bytes,		/* Bytes read/written */
-diff -urNad cups-1.4.3~/backend/usb-unix.c cups-1.4.3/backend/usb-unix.c
---- cups-1.4.3~/backend/usb-unix.c	2009-12-08 03:13:42.000000000 +0100
-+++ cups-1.4.3/backend/usb-unix.c	2010-04-09 15:56:30.799666933 +0200
-@@ -18,10 +18,10 @@
-  *
-  * Contents:
-  *
-- *   print_device() - Print a file to a USB device.
-- *   list_devices() - List all USB devices.
-- *   open_device()  - Open a USB device...
-- *   side_cb()      - Handle side-channel requests...
-+ *   print_device_unix() - Print a file to a USB device.
-+ *   list_devices_unix() - List all USB devices.
-+ *   open_device_unix()  - Open a USB device...
-+ *   side_cb_unix()      - Handle side-channel requests...
-  */
- 
- /*
-@@ -35,17 +35,17 @@
-  * Local functions...
-  */
- 
--static int	open_device(const char *uri, int *use_bc);
--static int	side_cb(int print_fd, int device_fd, int snmp_fd,
-+static int	open_device_unix(const char *uri, int *use_bc);
-+static int	side_cb_unix(int print_fd, int device_fd, int snmp_fd,
- 		        http_addr_t *addr, int use_bc);
- 
- 
- /*
-- * 'print_device()' - Print a file to a USB device.
-+ * 'print_device_unix()' - Print a file to a USB device.
-  */
- 
- int					/* O - Exit status */
--print_device(const char *uri,		/* I - Device URI */
-+print_device_unix(const char *uri,		/* I - Device URI */
-              const char *hostname,	/* I - Hostname/manufacturer */
-              const char *resource,	/* I - Resource/modelname */
- 	     char       *options,	/* I - Device options/serial number */
-@@ -102,7 +102,7 @@
-              strncasecmp(hostname, "Minolta", 7);
- #endif /* __FreeBSD__ || __NetBSD__ || __OpenBSD__ || __DragonFly__ */
- 
--    if ((device_fd = open_device(uri, &use_bc)) == -1)
-+    if ((device_fd = open_device_unix(uri, &use_bc)) == -1)
-     {
-       if (getenv("CLASS") != NULL)
-       {
-@@ -132,6 +132,10 @@
- 	              _("INFO: Printer busy; will retry in 10 seconds...\n"));
- 	sleep(10);
-       }
-+#ifdef HAVE_USB_H
-+      else
-+	return (-1);
-+#else
-       else if (errno == ENXIO || errno == EIO || errno == ENOENT ||
-                errno == ENODEV)
-       {
-@@ -147,6 +151,7 @@
- 			resource, strerror(errno));
- 	return (CUPS_BACKEND_FAILED);
-       }
-+#endif
-     }
-   }
-   while (device_fd < 0);
-@@ -190,7 +195,7 @@
-     tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, NULL);
- 
- #else
--    tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb);
-+    tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb_unix);
- #endif /* __sun */
- 
-     if (print_fd != 0 && tbytes >= 0)
-@@ -214,11 +219,11 @@
- 
- 
- /*
-- * 'list_devices()' - List all USB devices.
-+ * 'list_devices_unix()' - List all USB devices.
-  */
- 
- void
--list_devices(void)
-+list_devices_unix(void)
- {
- #ifdef __linux
-   int	i;				/* Looping var */
-@@ -320,11 +325,11 @@
- 
- 
- /*
-- * 'open_device()' - Open a USB device...
-+ * 'open_device_unix()' - Open a USB device...
-  */
- 
- static int				/* O - File descriptor or -1 on error */
--open_device(const char *uri,		/* I - Device URI */
-+open_device_unix(const char *uri,		/* I - Device URI */
-             int        *use_bc)		/* O - Set to 0 for unidirectional */
- {
-   int	fd;				/* File descriptor */
-@@ -357,9 +362,12 @@
-     char	device[255],		/* Device filename */
- 		device_id[1024],	/* Device ID string */
- 		make_model[1024],	/* Make and model */
--		device_uri[1024];	/* Device URI string */
--
-+		device_uri[1024],	/* Device URI string */
-+		requested_uri[1024],	/* Device URI string */
-+		*str1,
-+		*str2;
- 
-+    
-    /*
-     * Find the correct USB device...
-     */
-@@ -407,7 +415,55 @@
- 	  device_uri[0] = '\0';
-         }
- 
--        if (!strcmp(uri, device_uri))
-+	/* Work on a copy of uri */
-+	strncpy(requested_uri, uri, sizeof(requested_uri));
-+	requested_uri[sizeof(requested_uri) - 1] = '\0';
-+
-+	/*
-+	 * libusb-discovered URIs can have an "interface" specification and this
-+	 * never happens for usblp-discovered URIs, so remove the "interface"
-+	 * specification from the URI of the print queue. This way a queue for
-+	 * a libusb-discovered printer can now be accessed via the usblip kernel
-+	 * module
-+	 */
-+	if ((str1 = strstr(requested_uri, "interface=")) != NULL)
-+	  *(str1 - 1) = '\0';
-+
-+	/*
-+	 * Old URI with "serial=?". Cut this part off and consider this as
-+	 * an URI without serial number
-+	 */
-+	if ((str1 = strstr(requested_uri, "serial=?")) != NULL)
-+	 *(str1 - 1) = '\0';
-+
-+	/*
-+	 * Old URI without serial number. Match it also with URIs with serial
-+	 * number
-+	 */
-+	if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
-+	    ((str2 = strstr(device_uri, "serial=")) != NULL))
-+	    *(str2 - 1) = '\0';
-+
-+	/*
-+	 * libusb-discovered URIs can have a "serial" specification when the
-+	 * usblp-discovered URI for the same printer does not have one, as
-+	 * with libusb we can discover serial numbers also with other methods
-+	 * than only via the device ID. Therefore we accept also a
-+	 * usblp-discovered printer without serial number as a match. This we
-+	 * do by removing the serial number from the queue's (libusb-discovered)
-+	 * URI before comparing. Also warn the user because of the incapability
-+	 * of the usblp-based access to distinguish printers by the serial
-+	 * number.
-+	 */
-+	if (((str1 = strstr(requested_uri, "serial=")) != NULL) &&
-+	    ((str2 = strstr(device_uri, "serial=")) == NULL))
-+	{
-+	  *(str1 - 1) = '\0';
-+	  fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please unload (and blacklist) the \"usblp\" kernel module as otherwise CUPS will not be able to distinguish your printers.\n",
-+		  make_model);
-+	}
-+
-+        if (!strcmp(requested_uri, device_uri))
- 	{
- 	 /*
- 	  * Yes, return this file descriptor...
-@@ -433,10 +489,14 @@
-       */
- 
-       if (busy)
-+      {
- 	_cupsLangPuts(stderr,
- 	              _("INFO: Printer busy; will retry in 5 seconds...\n"));
- 
--      sleep(5);
-+	sleep(5);
-+      }
-+      else
-+	return -1;
-     }
-   }
- #elif defined(__sun) && defined(ECPPIOC_GETDEVID)
-@@ -557,11 +617,11 @@
- 
- 
- /*
-- * 'side_cb()' - Handle side-channel requests...
-+ * 'side_cb_unix()' - Handle side-channel requests...
-  */
- 
- static int				/* O - 0 on success, -1 on error */
--side_cb(int         print_fd,		/* I - Print file */
-+side_cb_unix(int         print_fd,		/* I - Print file */
-         int         device_fd,		/* I - Device file */
-         int         snmp_fd,		/* I - SNMP socket (unused) */
- 	http_addr_t *addr,		/* I - Device address (unused) */
-diff -urNad cups-1.4.3~/backend/usb.c cups-1.4.3/backend/usb.c
---- cups-1.4.3~/backend/usb.c	2008-06-24 03:28:36.000000000 +0200
-+++ cups-1.4.3/backend/usb.c	2010-04-09 15:56:04.345707078 +0200
-@@ -56,7 +56,7 @@
-  */
- 
- #ifdef HAVE_USB_H
--#  include "usb-libusb.c"
-+#  include "usb-hybrid.c"
- #elif defined(__APPLE__)
- #  include "usb-darwin.c"
- #elif defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__)
diff --git a/source/a/cups/usb-backend-reset-after-job-only-for-specific-devices.patch b/source/a/cups/usb-backend-reset-after-job-only-for-specific-devices.patch
new file mode 100644
index 00000000..dcf91c83
--- /dev/null
+++ b/source/a/cups/usb-backend-reset-after-job-only-for-specific-devices.patch
@@ -0,0 +1,74 @@
+--- backend/usb-libusb.c.orig	2012-07-16 19:10:55.000000000 +0200
++++ backend/usb-libusb.c	2012-08-06 11:01:58.034150159 +0200
+@@ -70,7 +70,7 @@
+ 			read_endp,	/* Read endpoint */
+ 			protocol,	/* Protocol: 1 = Uni-di, 2 = Bi-di. */
+ 			usblp_attached,	/* "usblp" kernel module attached? */
+-			opened_for_job;	/* Set to 1 by print_device() */
++			reset_after_job; /* Set to 1 by print_device() */
+   unsigned int		quirks;		/* Quirks flags */
+   struct libusb_device_handle *handle;	/* Open handle to device */
+ } usb_printer_t;
+@@ -122,6 +122,8 @@
+ #define USBLP_QUIRK_USB_INIT	0x2	/* needs vendor USB init string */
+ #define USBLP_QUIRK_BAD_CLASS	0x4	/* descriptor uses vendor-specific
+ 					   Class or SubClass */
++#define USBLP_QUIRK_RESET	0x4000	/* After printing do a reset
++					   for clean-up */
+ #define USBLP_QUIRK_NO_REATTACH	0x8000	/* After printing we cannot re-attach
+ 					   the usblp kernel module */
+ 
+@@ -147,9 +149,11 @@
+ 	{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt
+ 						      Printer M129C */
+ 	{ 0x067b, 0x2305, USBLP_QUIRK_BIDIR |
+-			  USBLP_QUIRK_NO_REATTACH },
++			  USBLP_QUIRK_NO_REATTACH |
++	                  USBLP_QUIRK_RESET },
+ 	/* Prolific Technology, Inc. PL2305 Parallel Port
+ 	   (USB -> Parallel adapter) */
++	{ 0x04e8, 0x0000, USBLP_QUIRK_RESET }, /* All Samsung devices */
+ 	{ 0, 0 }
+ };
+ 
+@@ -256,7 +260,12 @@
+   }
+ 
+   g.print_fd = print_fd;
+-  g.printer->opened_for_job = 1;
++
++ /*
++  * Some devices need a reset after finishing a job, these devices are
++  * marked with the USBLP_QUIRK_RESET quirk.
++  */
++  g.printer->reset_after_job = (g.printer->quirks & USBLP_QUIRK_RESET ? 1 : 0);
+ 
+  /*
+   * If we are printing data from a print driver on stdin, ignore SIGTERM
+@@ -772,7 +781,7 @@
+     * Reset the device to clean up after the job
+     */
+ 
+-    if (printer->opened_for_job == 1)
++    if (printer->reset_after_job == 1)
+     {
+       if ((errcode = libusb_reset_device(printer->handle)) < 0)
+ 	fprintf(stderr,
+@@ -1288,7 +1297,7 @@
+   }
+ 
+   printer->usblp_attached = 0;
+-  printer->opened_for_job = 0;
++  printer->reset_after_job = 0;
+ 
+   if (verbose)
+     fputs("STATE: +connecting-to-device\n", stderr);
+@@ -1586,7 +1595,7 @@
+   for (i = 0; quirk_printers[i].vendorId; i++)
+   {
+     if (vendor == quirk_printers[i].vendorId &&
+-	product == quirk_printers[i].productId)
++	(product == 0x0000 || product == quirk_printers[i].productId))
+       return quirk_printers[i].quirks;
+   }
+   return 0;
diff --git a/source/a/cxxlibs/cxxlibs.SlackBuild b/source/a/cxxlibs/cxxlibs.SlackBuild
index eff5d26c..b795d273 100755
--- a/source/a/cxxlibs/cxxlibs.SlackBuild
+++ b/source/a/cxxlibs/cxxlibs.SlackBuild
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 
 
 PKGNAM=cxxlibs
-VERSION=${VERSION:-6.0.14}
+VERSION=${VERSION:-6.0.17}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/a/cxxlibs/symlinks-to-tracked-libs b/source/a/cxxlibs/symlinks-to-tracked-libs
index e4f67cf6..39ff58e3 100644
--- a/source/a/cxxlibs/symlinks-to-tracked-libs
+++ b/source/a/cxxlibs/symlinks-to-tracked-libs
@@ -1,5 +1,2 @@
-/usr/i486-slackware-linux/lib/libstdc++-libc6.1-2.so.3
-/usr/i486-slackware-linux/lib/libstdc++-libc6.2-2.so.3
-/usr/i486-slackware-linux/lib/libstdc++.so.4
-/usr/i486-slackware-linux/lib/libstdc++.so.5
+/usr/lib/libstdc++.so.5
 /usr/lib/libstdc++.so.6
diff --git a/source/a/dbus/dbus.SlackBuild b/source/a/dbus/dbus.SlackBuild
index b11340cd..bd6acd99 100755
--- a/source/a/dbus/dbus.SlackBuild
+++ b/source/a/dbus/dbus.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007-2010  Robby Workman, Northport, Alabama, USA
-# Copyright 2007-2010  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2007-2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=dbus
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -69,6 +69,7 @@ find . \
  -exec chmod 644 {} \;
 
 zcat $CWD/dbus-1.4.x-allow_root_globally.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/dbus.set.home.diff.gz | patch -p1 --verbose || exit 1
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
@@ -80,9 +81,11 @@ CXXFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --infodir=/usr/info \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-doxygen-docs \
   --enable-shared=yes \
   --enable-static=no \
   --enable-inotify \
+  --enable-x11-autolaunch \
   --with-system-pid-file=/var/run/dbus/dbus.pid \
   --with-system-socket=/var/run/dbus/system_bus_socket \
   --with-init-scripts=slackware \
@@ -94,8 +97,20 @@ make install DESTDIR=$PKG
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 # Install a custom init script for dbus - the included one is not good for us
 rm $PKG/etc/rc.d/*
@@ -112,6 +127,14 @@ cp -a \
   $PKG/usr/doc/$PKGNAM-$VERSION
 find $PKG/usr/doc/$PKGNAM-$VERSION -type f -exec chmod 0644 {} \;
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/a/dbus/dbus.set.home.diff b/source/a/dbus/dbus.set.home.diff
new file mode 100644
index 00000000..5c0f7976
--- /dev/null
+++ b/source/a/dbus/dbus.set.home.diff
@@ -0,0 +1,22 @@
+Set HOME environment variable when switching user.
+
+2011-08-05 Egor Y. Egorov
+
+References:
+https://bugs.freedesktop.org/show_bug.cgi?id=39857
+https://bugs.kde.org/show_bug.cgi?id=249217#c27
+
+diff --git a/bus/activation-helper.c b/bus/activation-helper.c
+index baba8f0..b75ea7c 100644
+--- a/bus/activation-helper.c
++++ b/bus/activation-helper.c
+@@ -344,6 +344,8 @@ switch_user (char *user, DBusError *error)
+                       "cannot setuid user %i", pw->pw_uid);
+       return FALSE;
+     }
++
++  _dbus_setenv ("HOME", pw->pw_dir);
+ #endif
+   return TRUE;
+ }
+
diff --git a/source/a/dbus/rc.messagebus b/source/a/dbus/rc.messagebus
index 7b27eb59..fb035af5 100644
--- a/source/a/dbus/rc.messagebus
+++ b/source/a/dbus/rc.messagebus
@@ -16,7 +16,8 @@
 PIDFILE=/var/run/dbus/dbus.pid
 
 start() {
-  if ! ps axc | grep -w dbus-daemon ; then
+  mkdir -p $(dirname $PIDFILE)
+  if ! ps -u messagebus -c | grep -wq dbus-daemon; then
     rm -f $(dirname $PIDFILE)/*
     if [ -x /usr/bin/dbus-uuidgen -a -x /usr/bin/dbus-daemon ] ; then
       echo "Starting system message bus:  /usr/bin/dbus-uuidgen --ensure ; /usr/bin/dbus-daemon --system"
@@ -48,10 +49,10 @@ reload() {
 }
 
 status() {
-  if ps axc | grep -wq dbus-daemon 2>/dev/null ; then
-    echo "dbus-daemon is running."
+  if ps -u messagebus -c | grep -wq dbus-daemon; then
+    echo "System dbus-daemon is running."
   else
-    echo "dbus is stopped."
+    echo "System dbus-daemon is stopped."
   fi
 }
 
@@ -66,6 +67,7 @@ case "$1" in
   restart)
     stop
     start
+    echo "You may need to restart your Window Manager to reconnect to the system dbus."
     ;;
   reload)
     reload
diff --git a/source/a/dcron/crontab.c.O_EXCL.diff b/source/a/dcron/crontab.c.O_EXCL.diff
index 7acd5ce2..f705487e 100644
--- a/source/a/dcron/crontab.c.O_EXCL.diff
+++ b/source/a/dcron/crontab.c.O_EXCL.diff
@@ -1,5 +1,6 @@
---- ./crontab.c.orig	2010-01-18 09:27:31.000000000 -0600
-+++ ./crontab.c	2010-02-11 16:38:03.000000000 -0600
+diff -Nur dcron-4.5.orig//crontab.c dcron-4.5/crontab.c
+--- dcron-4.5.orig//crontab.c	2011-05-01 07:22:09.000000000 -0500
++++ dcron-4.5/crontab.c	2011-08-22 16:26:46.778225447 -0500
 @@ -199,7 +199,7 @@
  				 * Read from repFd, write to fd for "$CDir/$USER.new"
  				 */
diff --git a/source/a/dcron/crontab.root b/source/a/dcron/crontab.root
index b5b42562..5b0ce8cb 100644
--- a/source/a/dcron/crontab.root
+++ b/source/a/dcron/crontab.root
@@ -1,7 +1,7 @@
 # If you don't want the output of a cron job mailed to you, you have to direct
 # any output to /dev/null.  We'll do this here since these jobs should run
-# properly on a newly installed system, but if they don't the average newbie
-# might get quite perplexed about getting strange mail every 5 minutes. :^)
+# properly on a newly installed system.  If a script fails, run-parts will
+# mail a notice to root.
 #
 # Run the hourly, daily, weekly, and monthly cron jobs.
 # Jobs that need different timing may be entered into the crontab as before,
diff --git a/source/a/dcron/dcron.SlackBuild b/source/a/dcron/dcron.SlackBuild
index f67f869f..243c0cc8 100755
--- a/source/a/dcron/dcron.SlackBuild
+++ b/source/a/dcron/dcron.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=${VERSION:-$(echo dcron-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -70,10 +70,7 @@ zcat $CWD/defs.h.TMPDIR.diff.gz | patch -p1 || exit 1
 # using 'crontab -', exits with control-c, and then crontab refuses to
 # overwrite the junk file.  It would be better if dcron would wipe
 # the junk file in the event it were not closed correctly, but oh well.
-zcat $CWD/patches/crontab.c.O_EXCL.diff.gz | patch -p1 || exit 1
-
-# Get the directory names under /var/spool/ right in the manpages:
-zcat $CWD/dcron.manpage.paths.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/crontab.c.O_EXCL.diff.gz | patch -p1 || exit 1
 
 CFLAGS+="$SLKCFLAGS" make || exit 1
 strip --strip-unneeded crond crontab
diff --git a/source/a/dcron/dcron.manpage.paths.diff b/source/a/dcron/dcron.manpage.paths.diff
deleted file mode 100644
index afd9c3d1..00000000
--- a/source/a/dcron/dcron.manpage.paths.diff
+++ /dev/null
@@ -1,65 +0,0 @@
---- ./crond.8.orig	2010-01-18 09:29:25.000000000 -0600
-+++ ./crond.8	2010-02-11 17:22:36.000000000 -0600
-@@ -17,13 +17,13 @@
- .RE
- .TP
- .B -c dir
--directory of per-user crontabs (defaults to /var/spool/cron)
-+directory of per-user crontabs (defaults to /var/spool/cron/crontabs)
- .RS
- .RE
- .TP
- .B -t dir
- directory of timestamps for \@freq and FREQ=\&... jobs (defaults to
--/var/spool/cronstamps)
-+/var/spool/cron/cronstamps)
- .RS
- .RE
- .TP
-@@ -172,7 +172,7 @@
- \f[B]crontab\f[] notifies \f[B]crond\f[] that a user's crontab file
- has been modified (or created or deleted) through the
- \[lq]cron.update\[rq] file, which resides in the per-user crontabs
--directory (usually /var/spool/cron).
-+directory (usually /var/spool/cron/crontabs).
- \f[B]crontab\f[] appends the filename of the modified crontab file
- to \[lq]cron.update\[rq]; and \f[B]crond\f[] inspects this file to
- determine when to reparse or otherwise update its internal list of
-@@ -180,7 +180,7 @@
- .PP
- Whenever a \[lq]cron.update\[rq] file is seen, \f[B]crond\f[] also
- re-reads timestamp files from its timestamp directory (usually
--/var/spool/cronstamps).
-+/var/spool/cron/cronstamps).
- Normally these will just mirror \f[B]crond\f[]'s own internal
- representations, but this mechanism could be used to manually
- notify \f[B]crond\f[] that you've externally updated the
-@@ -210,7 +210,7 @@
- crontab to /etc/cron.d/foo.
- .PP
- The superuser has a per-user crontab along with other users.
--It usually resides at /var/spool/cron/root.
-+It usually resides at /var/spool/cron/crontabs/root.
- .PP
- Users can only have a crontab if they have an entry in /etc/passwd;
- however they do not need to have login shell privileges.
---- ./crontab.1.orig	2010-01-18 09:29:25.000000000 -0600
-+++ ./crontab.1	2010-02-11 17:23:13.000000000 -0600
-@@ -45,7 +45,7 @@
- different user and/or crontab directory.
- .PP
- The superuser also has his or her own per-user crontab, saved as
--/var/spool/cron/root.
-+/var/spool/cron/crontabs/root.
- .PP
- Unlike other cron daemons, this crond/crontab package doesn't try
- to do everything under the sun.
-@@ -117,7 +117,7 @@
- The formats \@hourly, \@daily, \@weekly, \@monthly, and \@yearly
- need to update timestamp files when their jobs have been run.
- The timestamp files are saved as
--/var/spool/cronstamps/user.jobname.
-+/var/spool/cron/cronstamps/user.jobname.
- So for all of these formats, the cron command needs a jobname,
- given by prefixing the command with \f[B]ID=jobname\f[].
- (This syntax was chosen to maximize the chance that our crontab
diff --git a/source/a/dcron/defs.h.TMPDIR.diff b/source/a/dcron/defs.h.TMPDIR.diff
index 6263843b..698f4ebc 100644
--- a/source/a/dcron/defs.h.TMPDIR.diff
+++ b/source/a/dcron/defs.h.TMPDIR.diff
@@ -1,5 +1,6 @@
---- ./defs.h.orig	2010-01-15 20:17:04.000000000 -0600
-+++ ./defs.h	2010-02-11 16:39:33.000000000 -0600
+diff -Nur dcron-4.5.orig//defs.h dcron-4.5/defs.h
+--- dcron-4.5.orig//defs.h	2011-05-01 07:22:09.000000000 -0500
++++ dcron-4.5/defs.h	2011-08-22 16:28:35.343956248 -0500
 @@ -73,7 +73,7 @@
  #define CRONUPDATE	"cron.update"
  #endif
diff --git a/source/a/dcron/run-parts b/source/a/dcron/run-parts
index 247d8c6e..65c778f3 100644
--- a/source/a/dcron/run-parts
+++ b/source/a/dcron/run-parts
@@ -39,10 +39,7 @@ for SCRIPT in $1/* ; do
   fi
   # If we've made it this far, then run the script if it's executable:
   if [ -x $SCRIPT ]; then
-    echo "$SCRIPT:"
-    echo
-    $SCRIPT 2>&1
-    echo
+    $SCRIPT || echo "$SCRIPT failed."
   fi
 done
 
diff --git a/source/a/e2fsprogs/e2fsprogs-1.42.6.tar.sign b/source/a/e2fsprogs/e2fsprogs-1.42.6.tar.sign
new file mode 100644
index 00000000..6558e77e
--- /dev/null
+++ b/source/a/e2fsprogs/e2fsprogs-1.42.6.tar.sign
diff --git a/source/a/e2fsprogs/e2fsprogs.SlackBuild b/source/a/e2fsprogs/e2fsprogs.SlackBuild
index a14d8e11..3ba78e55 100755
--- a/source/a/e2fsprogs/e2fsprogs.SlackBuild
+++ b/source/a/e2fsprogs/e2fsprogs.SlackBuild
@@ -20,18 +20,23 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
 VERSION=${VERSION:-$(echo e2fsprogs*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -44,11 +49,19 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-e2fsprogs
@@ -81,7 +94,7 @@ CFLAGS="$SLKCFLAGS" \
   --disable-libblkid \
   --disable-libuuid \
   --disable-uuidd \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
@@ -125,6 +138,7 @@ EOF
   chmod 0755 fsck.ext2
   # Why won't symlinks work here?  --RW
   # Because $0 will always be "fsck.ext2" in that case.  --PJV
+  # rworkman is correct, so ignore the previous two comments  :)  --PJV
   cp -a fsck.ext2 fsck.ext3
   cp -a fsck.ext2 fsck.ext4
   cp -a fsck.ext2 fsck.ext4dev
diff --git a/source/a/eject/eject.SlackBuild b/source/a/eject/eject.SlackBuild
index c637ef55..94b0ccf7 100755
--- a/source/a/eject/eject.SlackBuild
+++ b/source/a/eject/eject.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=eject
 VERSION=${VERSION:-2.1.5}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -59,6 +59,9 @@ cd ${PKGNAM}
 # Patch a problem with spaces in the pathname:
 zcat $CWD/eject.spaces.diff.gz | patch -p0 --verbose || exit 1
 
+# Fix "eject -T":
+zcat $CWD/eject_for_mac.patch.gz | patch -p4 --verbose || exit 1
+
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
diff --git a/source/a/eject/eject_for_mac.patch b/source/a/eject/eject_for_mac.patch
new file mode 100644
index 00000000..c86e3c17
--- /dev/null
+++ b/source/a/eject/eject_for_mac.patch
@@ -0,0 +1,12 @@
+diff -Nru /tmp/6rrvEn4EMT/eject-2.1.4/eject.c /tmp/Jon9ZzjSLN/eject-2.1.4/eject.c
+--- /tmp/6rrvEn4EMT/eject-2.1.4/eject.c	2007-03-12 14:15:26.000000000 +0100
++++ /tmp/Jon9ZzjSLN/eject-2.1.4/eject.c	2007-03-12 14:15:28.000000000 +0100
+@@ -552,7 +552,7 @@
+ 	gettimeofday(&time_start, NULL);
+ 	
+ 	/* Send the CDROMEJECT command to the device. */
+-	if (ioctl(fd, CDROMEJECT, 0) < 0) {
++	if (ioctl(fd, CDROMEJECT, 0) < 0 && errno != EIO) {
+ 		perror("ioctl");
+ 		exit(1);
+ 	}
diff --git a/source/a/etc/etc.SlackBuild b/source/a/etc/etc.SlackBuild
index d4508f2b..5db87ea7 100755
--- a/source/a/etc/etc.SlackBuild
+++ b/source/a/etc/etc.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=13.013
+VERSION=14.0
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/a/file/file.short.diff b/source/a/file/file.short.diff
index be47218c..0f6a0e7b 100644
--- a/source/a/file/file.short.diff
+++ b/source/a/file/file.short.diff
@@ -1,12 +1,12 @@
-diff -Nur file-5.00.orig/src/readelf.h file-5.00/src/readelf.h
---- file-5.00.orig/src/readelf.h	2008-05-28 15:58:16.000000000 -0500
-+++ file-5.00/src/readelf.h	2009-02-08 22:17:26.681636542 -0600
-@@ -233,7 +233,7 @@
- #define NT_OPENBSD_VERSION	1
- #define NT_DRAGONFLY_VERSION	1
- /* GNU executables (name = "GNU") */
--#define NT_GNU_VERSION		1
-+#define NT_GNU_VERSION		0
+diff -Nur file-5.08.orig//src/readelf.h file-5.08/src/readelf.h
+--- file-5.08.orig//src/readelf.h	2011-08-03 09:45:16.000000000 -0500
++++ file-5.08/src/readelf.h	2011-08-23 21:10:04.228054614 -0500
+@@ -239,7 +239,7 @@
+  * word[2]: minor version
+  * word[3]: tiny version
+  */
+-#define	NT_GNU_VERSION		1
++#define	NT_GNU_VERSION		0
  
  /* GNU OS tags */
- #define GNU_OS_LINUX	0
+ #define	GNU_OS_LINUX	0
diff --git a/source/a/file/slack-desc b/source/a/file/slack-desc
index 96be2617..d405cb86 100644
--- a/source/a/file/slack-desc
+++ b/source/a/file/slack-desc
@@ -11,7 +11,7 @@ file:
 file: This is Ian F. Darwin's 'file' utility, used to identify files.
 file: Christos Zoulas has been file's maintainer since 1994.
 file:
-file:
+file: Home FTP site:  ftp://ftp.astron.com/pub/file/
 file:
 file:
 file:
diff --git a/source/a/gdisk/gdisk.SlackBuild b/source/a/gdisk/gdisk.SlackBuild
deleted file mode 100755
index 841332dd..00000000
--- a/source/a/gdisk/gdisk.SlackBuild
+++ /dev/null
@@ -1,117 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2011  Eric Hameleers, Eindhoven, NL
-# Copyright 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=gdisk
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION
-
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-export LDFLAGS="$SLKLDFLAGS"
-export CXXFLAGS="$SLKCFLAGS"
-export CFLAGS="$SLKCFLAGS"
-make || exit 1
-
-# Manually install the stuff:
-for FILE in gdisk sgdisk ; do
-  install -D $FILE $PKG/sbin/$FILE
-  install -D $FILE.8 $PKG/usr/man/man8/$FILE.8
-done
-
-# Add documentation:
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a \
-  COPYING* NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-
-# Strip binaries:
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-# Compress and if needed symlink the man pages:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/a/gdisk/slack-desc b/source/a/gdisk/slack-desc
deleted file mode 100644
index 492b4460..00000000
--- a/source/a/gdisk/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-gdisk: gdisk (GPT fdisk)
-gdisk:
-gdisk: GPT fdisk (gdisk) is a partitioning tool for disks using a GPT (GUID
-gdisk: Partition Table).  It features a command-line interface, fairly direct
-gdisk: manipulation of partition table structures, recovery tools to help
-gdisk: you deal with corrupt partition tables, and the ability to convert
-gdisk: MBR disks to GPT format.
-gdisk:
-gdisk:
-gdisk: gdisk home: http://www.rodsbooks.com/gdisk/
-gdisk:
diff --git a/source/a/gettext/gettext-tools.SlackBuild b/source/a/gettext/gettext-tools.SlackBuild
index 0ed840dc..8b3154b0 100755
--- a/source/a/gettext/gettext-tools.SlackBuild
+++ b/source/a/gettext/gettext-tools.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=0.18.1.1
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j6 "}
 
diff --git a/source/a/gettext/gettext.SlackBuild b/source/a/gettext/gettext.SlackBuild
index acaf1df1..cd86bf7e 100755
--- a/source/a/gettext/gettext.SlackBuild
+++ b/source/a/gettext/gettext.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=0.18.1.1
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j6 "}
 
diff --git a/source/a/gptfdisk/gptfdisk.SlackBuild b/source/a/gptfdisk/gptfdisk.SlackBuild
new file mode 100755
index 00000000..6c6f5fc9
--- /dev/null
+++ b/source/a/gptfdisk/gptfdisk.SlackBuild
@@ -0,0 +1,122 @@
+#!/bin/sh
+
+# Copyright 2011  Eric Hameleers, Eindhoven, NL
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=gptfdisk
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+# Remove dependency on icu4c by switching from the uncommented Makefile
+# lines to the commented ones:
+zcat $CWD/gptfdisk.remove.icu4c.dep.diff.gz | patch -p1 || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+export LDFLAGS="$SLKLDFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export CFLAGS="$SLKCFLAGS"
+make || exit 1
+
+# Manually install the stuff:
+for FILE in cgdisk fixparts gdisk sgdisk ; do
+  install -D $FILE $PKG/sbin/$FILE
+  install -D $FILE.8 $PKG/usr/man/man8/$FILE.8
+done
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING* NEWS README* \
+  gdisk_test.sh \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/gptfdisk/gptfdisk.remove.icu4c.dep.diff b/source/a/gptfdisk/gptfdisk.remove.icu4c.dep.diff
new file mode 100644
index 00000000..ce5d7a8a
--- /dev/null
+++ b/source/a/gptfdisk/gptfdisk.remove.icu4c.dep.diff
@@ -0,0 +1,36 @@
+--- ./Makefile.orig	2012-05-30 10:38:43.000000000 -0500
++++ ./Makefile	2012-08-06 16:37:17.256362865 -0500
+@@ -1,8 +1,8 @@
+ CC=gcc
+ CXX=g++
+ CFLAGS+=-D_FILE_OFFSET_BITS=64
+-CXXFLAGS+=-Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16
+-#CXXFLAGS+=-Wall -D_FILE_OFFSET_BITS=64
++#CXXFLAGS+=-Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16
++CXXFLAGS+=-Wall -D_FILE_OFFSET_BITS=64
+ LDFLAGS+=
+ LIB_NAMES=crc32 support guid gptpart mbrpart basicmbr mbr gpt bsd parttypes attributes diskio diskio-unix
+ MBR_LIBS=support diskio diskio-unix basicmbr mbrpart
+@@ -14,16 +14,16 @@
+ all:	cgdisk gdisk sgdisk fixparts
+ 
+ gdisk:	$(LIB_OBJS) gdisk.o gpttext.o
+-#	$(CXX) $(LIB_OBJS) gdisk.o gpttext.o $(LDFLAGS) -luuid -o gdisk
+-	$(CXX) $(LIB_OBJS) gdisk.o gpttext.o $(LDFLAGS) -licuio -licuuc -luuid -o gdisk
++	$(CXX) $(LIB_OBJS) gdisk.o gpttext.o $(LDFLAGS) -luuid -o gdisk
++#	$(CXX) $(LIB_OBJS) gdisk.o gpttext.o $(LDFLAGS) -licuio -licuuc -luuid -o gdisk
+ 
+ cgdisk: $(LIB_OBJS) cgdisk.o gptcurses.o
+-#	$(CXX) $(LIB_OBJS) cgdisk.o gptcurses.o $(LDFLAGS) -luuid -lncurses -o cgdisk
+-	$(CXX) $(LIB_OBJS) cgdisk.o gptcurses.o $(LDFLAGS) -licuio -licuuc -luuid -lncurses -o cgdisk
++	$(CXX) $(LIB_OBJS) cgdisk.o gptcurses.o $(LDFLAGS) -luuid -lncurses -o cgdisk
++#	$(CXX) $(LIB_OBJS) cgdisk.o gptcurses.o $(LDFLAGS) -licuio -licuuc -luuid -lncurses -o cgdisk
+ 
+ sgdisk: $(LIB_OBJS) sgdisk.o gptcl.o
+-#	$(CXX) $(LIB_OBJS) sgdisk.o gptcl.o $(LDFLAGS) -luuid -lpopt -o sgdisk
+-	$(CXX) $(LIB_OBJS) sgdisk.o gptcl.o $(LDFLAGS) -licuio -licuuc -luuid -lpopt -o sgdisk
++	$(CXX) $(LIB_OBJS) sgdisk.o gptcl.o $(LDFLAGS) -luuid -lpopt -o sgdisk
++#	$(CXX) $(LIB_OBJS) sgdisk.o gptcl.o $(LDFLAGS) -licuio -licuuc -luuid -lpopt -o sgdisk
+ 
+ fixparts: $(MBR_LIB_OBJS) fixparts.o
+ 	$(CXX) $(MBR_LIB_OBJS) fixparts.o $(LDFLAGS) -o fixparts
diff --git a/source/a/gptfdisk/slack-desc b/source/a/gptfdisk/slack-desc
new file mode 100644
index 00000000..913fd875
--- /dev/null
+++ b/source/a/gptfdisk/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gptfdisk: gptfdisk (GPT fdisk utilities)
+gptfdisk:
+gptfdisk: GPT fdisk (consisting of the gdisk, cgdisk, sgdisk, and fixparts
+gptfdisk: programs) is a set of text-mode partitioning tools for using a GPT
+gptfdisk: (GUID Partition Table), rather than the traditional MBR (Master Boot
+gptfdisk: Record) partition tables.  It features several partitioning tools,
+gptfdisk: recovery tools to help you deal with corrupt partition tables, and the
+gptfdisk: ability to convert MBR disks to GPT format.
+gptfdisk:
+gptfdisk: gdisk home: http://www.rodsbooks.com/gdisk/
+gptfdisk:
diff --git a/source/a/grep/grep.SlackBuild b/source/a/grep/grep.SlackBuild
index b789bc72..6bdf0d81 100755
--- a/source/a/grep/grep.SlackBuild
+++ b/source/a/grep/grep.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -60,6 +60,7 @@ cd $TMP
 rm -rf grep-$VERSION
 tar xvf $CWD/grep-$VERSION.tar.xz || exit 1
 cd grep-$VERSION || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -90,11 +91,20 @@ mkdir -p $PKG/usr/bin
   ln -sf ../../bin/fgrep .
 )
 
-# Compress man pages
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 # Compress info pages
 rm -f $PKG/usr/info/dir
diff --git a/source/a/gzip/gzip.SlackBuild b/source/a/gzip/gzip.SlackBuild
index d5133fd5..19ef42fb 100755
--- a/source/a/gzip/gzip.SlackBuild
+++ b/source/a/gzip/gzip.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=gzip
-VERSION=${VERSION:-1.4}
+VERSION=${VERSION:-1.5}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j6}
@@ -166,5 +166,5 @@ mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $TMP/package-${PKGNAM}
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.tgz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/a/isapnptools/isapnptools-1.26.lsm b/source/a/isapnptools/isapnptools-1.26.lsm
new file mode 100644
index 00000000..f2c2af40
--- /dev/null
+++ b/source/a/isapnptools/isapnptools-1.26.lsm
@@ -0,0 +1,25 @@
+Begin3
+Title:          isapnptools
+Version:        1.26
+Entered-date:   2001-05-08
+Description:    ISA plug and play configuration utility
+	Two programs - one allows the dumping of resource data and generation
+	of a skeleton configuration file, the other configures ISA PnP hardware
+	using a configuration file.
+	See http://www.roestock.demon.co.uk/isapnptools/ for latest information.
+Keywords:       ISA PnP Configuration Hardware
+Author:         fox@roestock.demon.co.uk (Peter Fox)
+Maintained-by:  fox@roestock.demon.co.uk (Peter Fox)
+Primary-site:   MetaLab.unc.edu /pub/Linux/system/hardware
+	227k isapnptools-1.26.tgz
+	384k isapnptools-1.26.bin.tgz
+Alternate-site: tsx-11.mit.edu /pub/linux/sources/sbin
+	227k isapnptools-1.26.src.tar.gz
+Alternate-site: tsx-11.mit.edu /pub/linux/binaries/sbin
+	384k isapnptools-1.26.bin.tar.gz
+Alternate-site: ftp.lmh.ox.ac.uk /pub/linux/pnp
+	227k isapnptools-1.26.tgz
+Original-site:  ftp.demon.co.uk /pub/unix/linux/utils
+	227k isapnptools-1.26.tgz
+Copying-policy: GNU
+End
diff --git a/source/a/isapnptools/isapnptools.SlackBuild b/source/a/isapnptools/isapnptools.SlackBuild
new file mode 100755
index 00000000..38362878
--- /dev/null
+++ b/source/a/isapnptools/isapnptools.SlackBuild
@@ -0,0 +1,88 @@
+#!/bin/sh
+
+# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+CWD=`pwd`
+TMP=/tmp
+PKG=$TMP/package-isapnptools
+rm -rf $PKG
+mkdir -p $PKG
+cd $TMP
+
+# sanity check
+if [ "$( uname -m )" = "x86_64" ]; then
+  echo "isapnptools is not supported on x86_64"
+  exit 1
+fi
+
+VERSION=${VERSION:-1.26}
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-2}
+
+tar xzvf $CWD/isapnptools-$VERSION.tar.gz || exit 1
+cd isapnptools-$VERSION
+
+zcat $CWD/isapnptools_1.26-5.diff.xz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . -perm 666 -exec chmod 644 {} \;
+find . -perm 664 -exec chmod 644 {} \;
+find . -perm 600 -exec chmod 644 {} \;
+find . -perm 444 -exec chmod 644 {} \;
+find . -perm 400 -exec chmod 644 {} \;
+find . -perm 440 -exec chmod 644 {} \;
+find . -perm 777 -exec chmod 755 {} \;
+find . -perm 775 -exec chmod 755 {} \;
+find . -perm 511 -exec chmod 755 {} \;
+find . -perm 711 -exec chmod 755 {} \;
+find . -perm 555 -exec chmod 755 {} \;
+
+./configure --prefix=/usr
+make -j4 || exit 1
+( cd src
+  strip isapnp pnpdump
+  mkdir -p $PKG/sbin
+  cat isapnp > $PKG/sbin/isapnp
+  cat pnpdump > $PKG/sbin/pnpdump
+  chmod 755 $PKG/sbin/* )
+mkdir -p $PKG/etc
+( cd etc
+  mkdir -p $PKG/etc
+  cat isapnp.conf > $PKG/etc/isapnp.conf.sample
+  cat isapnp.gone > $PKG/etc/isapnp.gone.sample )
+( cd doc
+  mkdir -p $PKG/usr/man/man5
+  cat isapnp.conf.5 | gzip -9c > $PKG/usr/man/man5/isapnp.conf.5.gz
+  mkdir -p $PKG/usr/man/man8
+  cat isapnp.8 | gzip -9c > $PKG/usr/man/man8/isapnp.8.gz
+  cat pnpdump.8 | gzip -9c > $PKG/usr/man/man8/pnpdump.8.gz ) 
+mkdir -p $PKG/usr/doc/isapnptools-$VERSION
+cp -a AUTHORS CHANGES COPYING INSTALL README isapnp.lsm doc/isapnpfaq.txt doc/README.ide doc/README.initrd $PKG/usr/doc/isapnptools-$VERSION
+chown -R root:root $PKG/usr/doc/isapnptools-$VERSION
+chmod 644 $PKG/usr/doc/isapnptools-$VERSION/*
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -c n -l y $TMP/isapnptools-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/isapnptools/isapnptools.url b/source/a/isapnptools/isapnptools.url
new file mode 100644
index 00000000..e4a66ad5
--- /dev/null
+++ b/source/a/isapnptools/isapnptools.url
@@ -0,0 +1 @@
+http://www.roestock.demon.co.uk/isapnptools/
diff --git a/source/a/isapnptools/isapnptools_1.26-5.diff b/source/a/isapnptools/isapnptools_1.26-5.diff
new file mode 100644
index 00000000..73bfae9e
--- /dev/null
+++ b/source/a/isapnptools/isapnptools_1.26-5.diff
@@ -0,0 +1,597 @@
+--- isapnptools-1.26.orig/doc/man2html
++++ isapnptools-1.26/doc/man2html
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ #
+ # Brute force script to convert isapnptools man pages to html.
+ #
+--- isapnptools-1.26.orig/debian/changelog
++++ isapnptools-1.26/debian/changelog
+@@ -0,0 +1,263 @@
++isapnptools (1.26-5) unstable; urgency=low
++
++  * src/isapnp_main.l: Don't declare variable serial_identifier as static
++    (thanks Andreas Jochens).  Closes: #286477.
++
++ -- Steve M. Robbins <smr@debian.org>  Thu, 23 Dec 2004 00:04:41 -0500
++
++isapnptools (1.26-4) unstable; urgency=low
++
++  * Add amd64 to list of supported arches.  Closes: #257455.
++
++ -- Steve M. Robbins <smr@debian.org>  Wed,  7 Jul 2004 21:21:29 -0400
++
++isapnptools (1.26-3) unstable; urgency=low
++
++  * Applied portability fixes from David Weinehall.  Closes: #254921.
++    - debian/isapnptools.init: Replace "test EXPR1 -o EXPR2" by 
++      "test EXPR1 || test EXPR2".
++    - doc/man2html: Change hash-bang line from /bin/bash to /bin/sh.
++
++ -- Steve M. Robbins <smr@debian.org>  Thu, 24 Jun 2004 20:25:08 -0400
++
++isapnptools (1.26-2) unstable; urgency=low
++
++  * debian/control:
++    Standards-Version updated to 3.5.6.0; no changes required.
++    Build-depend on flex-old rather than flex.
++    Build-depend on linux-kernel-headers, for <linux/pci.h>.
++    Set -dev package section to libdevel.
++  
++  * debian/rules:
++    Suppress accidental execution of auto-* tools.
++    Honour DEB_BUILD_OPTIONS policy.
++  
++  * src/callbacks.c: Include stdlib.h, for declaration of exit().
++  
++  * src/resource.c: Define __KERNEL__ and include <linux/mod_devicetable.h>
++    to switch on definitions of __u32 et al.  Closes: #223166.
++
++ -- Steve M. Robbins <smr@debian.org>  Sat,  6 Dec 2003 22:32:25 -0500
++
++isapnptools (1.26-1) unstable; urgency=low
++
++  * New upstream release.
++  * Revert to explicit list of architectures; does not
++    build on "mipsel".  Closes: #97942.
++  * Do not install /etc/isapnp.conf or /etc/isapnp.gone;
++    supply them as examples, instead.
++  * Init script will exit if the kernel has an isa-pnp.o module.
++  * Install doc/README.lib in -dev package; don't install README
++    files for DOS, OS2, or borland.
++
++ -- Steve M. Robbins <smr@debian.org>  Fri, 18 May 2001 20:10:02 -0400
++
++isapnptools (1.25-1) unstable; urgency=low
++
++  * New upstream release.
++  * Change to architecture "any" (Closes: #94091).
++
++ -- Steve M. Robbins <smr@debian.org>  Mon, 16 Apr 2001 19:19:03 -0400
++
++isapnptools (1.24-3) unstable; urgency=low
++
++  * Fix getopt_long() call to avoid coredump (Closes: #93097).
++
++ -- Steve M. Robbins <smr@debian.org>  Sat,  7 Apr 2001 12:40:52 -0400
++
++isapnptools (1.24-2) unstable; urgency=low
++
++  * In version 1.24-1, all the include files were moved to libisapnp-dev, 
++    so it must conflict with older isapnptools (closes: #90373).
++  * Set section/priority to base/extra, in agreement with the archive
++    override file.
++
++ -- Steve M. Robbins <smr@debian.org>  Mon, 19 Mar 2001 23:12:31 -0500
++
++isapnptools (1.24-1) unstable; urgency=low
++
++  * New Maintainer (closes: #89719).
++  * New upstream version.
++    - scanner is case insensitive (closes: #74455, #75362, #83251).
++  * Repackaged using debhelper.
++    - correctly generates /usr/doc symlink (closes: #52641)
++  * Past NMU fixes that remain fixed:
++    - ensure isapnp is in /sbin (closes: #74893, #74642, #74349, #74487)
++    - dev package installs lib and headers (closes: #64469)
++    - README.lib was missing (closes: #62343, #53259)
++    - no longer uses awk (closes: #29633, #29862)
++    - updated version long ago (closes: #27784)
++    - upstream changelog correctly named (closes: #9664)
++  * Patch previously incorporated without closing bug:
++    - exit init script if test -e /proc/isapnp (closes: #53057)
++  * Closing lots of obsolete bugs (closes: #46674).
++
++ -- Steve M. Robbins <smr@debian.org>  Sun, 18 Mar 2001 20:11:10 -0500
++
++isapnptools (1.23-0.4) unstable; urgency=low
++
++  * Non-Maintainer upload.
++  * Apply patch-1.23a from
++    http://www.roestock.demon.co.uk/isapnptools/patch-1.23a.gz
++  * Created acconfig.h (build fix).
++
++ -- Ivo Timmermans <ivo@debian.org>  Fri, 23 Feb 2001 19:45:39 +0100
++
++isapnptools (1.23-0.3) unstable; urgency=low
++
++  * Non-Maintainer Upload.
++  * Fixed location of isapnp binary - should have tested this with 2.2
++    kernel, not just 2.4..  (Closes: #74642, #74349, #74363, #74642)
++
++ -- Joseph Carter <knghtbrd@debian.org>  Sun, 15 Oct 2000 13:20:19 -0500
++
++isapnptools (1.23-0.2) unstable; urgency=low
++
++  * Non-Maintainer Upload
++  * Fixed drain bamage in isapnp/release.h regarding config.h
++
++ -- Joseph Carter <knghtbrd@debian.org>  Wed,  4 Oct 2000 14:36:03 -0500
++
++isapnptools (1.23-0.1) unstable; urgency=low
++
++  * Non-Maintainer Upload.
++  * New upstream version
++  * Modified debian/* for autosomething
++
++ -- Joseph Carter <knghtbrd@debian.org>  Mon, 25 Sep 2000 01:04:14 -0500
++
++isapnptools (1.21-2.2) unstable; urgency=low
++
++  * NMU again.
++  * Put libisapnp-dev in devel, not libs.
++
++ -- Chris Lawrence <lawrencc@debian.org>  Mon, 24 Jul 2000 16:38:05 -0500
++
++isapnptools (1.21-2.1) unstable; urgency=low
++
++  * NMU.
++  * Create a separate libisapnp-dev package.  (Closes: #64469)
++  * Update Standards-Version in control file.
++  * Properly include section and priority fields.
++  * README.lib md5sums problem fixed.  (Closes: #53259, #62343)
++
++ -- Chris Lawrence <lawrencc@debian.org>  Sat,  1 Jul 2000 14:13:45 -0500
++
++isapnptools (1.21-2) unstable; urgency=low
++
++  * applied patch from Cesar Eduardo Barros to correct the behaviour
++  for IRQ 2. Closes: #50202.
++  * changed the test to not start for 2.3 kernels. Closes: #52818.
++
++ -- Frederic Lepied <Lepied@debian.org>  Thu, 16 Dec 1999 05:56:59 +0100
++
++isapnptools (1.21-1) unstable; urgency=low
++
++  * new upstream version.
++
++ -- Frederic Lepied <Lepied@debian.org>  Sat, 11 Dec 1999 15:52:40 +0100
++
++isapnptools (1.19-1) unstable; urgency=low
++
++  * new upstream version.
++
++ -- Frederic Lepied <Lepied@debian.org>  Thu, 21 Oct 1999 05:51:00 +0200
++
++isapnptools (1.18-1) unstable; urgency=low
++
++  * new upstream version.
++  * Don't start isapnp on startup for 2.3 kernels. Closes: Bug#43634.
++
++ -- Frederic Lepied <Lepied@debian.org>  Sat,  4 Sep 1999 07:06:42 +0200
++
++isapnptools (1.16-4) frozen unstable; urgency=low
++
++  * downgrade pciutils dependency from Recommend to Suggest. Closes Bug#29004.
++
++ -- Frederic Lepied <Lepied@debian.org>  Mon,  9 Nov 1998 06:01:16 +0100
++
++isapnptools (1.16-3) frozen unstable; urgency=low
++
++  * oops upload to frozen too.
++
++ -- Frederic Lepied <Lepied@debian.org>  Wed,  4 Nov 1998 04:06:53 +0100
++
++isapnptools (1.16-2) unstable; urgency=low
++
++  * added missing dependency fields. Closes Bug#28136
++  * (resource.c): use type instead of which to test for
++  the lspci command. Closes Bug#28728.
++
++ -- Frederic Lepied <Lepied@debian.org>  Tue, 27 Oct 1998 09:32:57 +0100
++
++isapnptools (1.16-1) unstable; urgency=low
++
++  * new upstream version.
++
++ -- Frederic Lepied <Lepied@debian.org>  Fri, 16 Oct 1998 08:53:06 +0200
++
++isapnptools (1.13-3.1) unstable; urgency=high
++
++  * Non-maintainer upload
++  * Fix #23770 (startup link in rcS.d)
++  * Add depend on dpkg >= 1.4.0.21 because of update-rc.d
++
++ -- Gergely Madarasz <gorgo@caesar.elte.hu>  Wed, 24 Jun 1998 00:11:59 +0200
++
++isapnptools (1.13-3) unstable; urgency=low
++
++  * made architecture i386 and alpha. Fix Bug#19704.
++
++ -- Frederic Lepied <Lepied@debian.org>  Sun, 15 Mar 1998 20:53:28 +0100
++
++isapnptools (1.13-2) unstable; urgency=low
++
++  * Fix Bug#19334 (reports from lintian).
++
++ -- Frederic Lepied <Lepied@debian.org>  Sun, 15 Mar 1998 14:44:16 +0100
++
++isapnptools (1.13-1) unstable; urgency=low, Closes=15423
++
++  * upstream release.
++  * remade architecture 'any' as it works with the alpha architecture now.
++  * install changelog.Debian compressed. Closes Bug#15423.
++
++ -- Frederic Lepied <Lepied@debian.org>  Wed,  7 Jan 1998 06:22:42 +0100
++
++isapnptools (1.11-3) unstable; urgency=low
++
++  * made architecture i386 (bug #12532).
++
++ -- Frederic Lepied <Lepied@debian.org>  Wed,  8 Oct 1997 11:22:26 +0200
++
++isapnptools (1.11-2) unstable; urgency=low
++
++  * test if isapnp.conf is readable before launching isapnp (bug #13688)
++
++ -- Frederic Lepied <Lepied@debian.org>  Wed,  8 Oct 1997 09:40:09 +0200
++
++isapnptools (1.11-1) unstable; urgency=low
++
++  * new upstream version.
++
++ -- Frederic Lepied <Lepied@debian.org>  Sat, 26 Jul 1997 11:14:14 +0200
++
++isapnptools (1.10-2) unstable; urgency=low
++
++  * compiled with libc6.
++
++ -- Frederic Lepied <Lepied@debian.org>  Sat, 12 Jul 1997 19:48:15 +0200
++
++isapnptools (1.10-1) unstable; urgency=low
++
++  * New upstream release.
++
++ -- Frederic Lepied <Lepied@debian.org>  Thu, 12 Jun 1997 08:47:14 +0200
++
++isapnptools (1.9-1) unstable; urgency=low
++
++  * Initial Release.
++  * Need to be integrated with sysvinit.
++
++ -- Frederic Lepied <Lepied@debian.org>  Thu, 13 Feb 1997 10:28:34 +0100
++
+--- isapnptools-1.26.orig/debian/control
++++ isapnptools-1.26/debian/control
+@@ -0,0 +1,26 @@
++Source: isapnptools
++Section: base
++Priority: extra
++Maintainer: Steve M. Robbins <smr@debian.org>
++Standards-Version: 3.5.8.0
++Build-Depends: debhelper (>> 3.0.0), flex-old, linux-kernel-headers
++
++Package: isapnptools
++Architecture: alpha amd64 arm i386
++Depends: ${shlibs:Depends}, dpkg (>= 1.4.0.21)
++Description: ISA Plug-And-Play configuration utilities.
++ This program is suitable for all systems, whether or not they
++ include a PnP BIOS. In fact, a PnP BIOS adds some complications
++ because it may already activate some cards so that the drivers
++ can find them, and these tools can unconfigure them, or change
++ their settings causing all sorts of nasty effects.
++
++Package: libisapnp-dev
++Architecture: alpha amd64 arm i386
++Conflicts: isapnptools (<< 1.24-1)
++Section: libdevel
++Priority: optional
++Description: ISA Plug-And-Play development libraries.
++ This package provides a header file and a static library for
++ development of software that detects and configures ISA Plug-And-Play
++ devices.
+--- isapnptools-1.26.orig/debian/copyright
++++ isapnptools-1.26/debian/copyright
+@@ -0,0 +1,17 @@
++This package was debianized by Frederic Lepied <Lepied@debian.org> on
++Thu, 13 Feb 1997 09:10:53 +0100.
++
++It was downloaded from http://www.roestock.demon.co.uk/isapnptools/index.html
++
++Copyright:
++
++		    GNU GENERAL PUBLIC LICENSE
++		       Version 2, June 1991
++
++ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
++   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ Everyone is permitted to copy and distribute verbatim copies
++ of this license document, but changing it is not allowed.
++
++On Debian Linux systems, the complete text of the GNU General
++Public License can be found in `/usr/share/common-licenses/GPL'.
+--- isapnptools-1.26.orig/debian/isapnptools.README.Debian
++++ isapnptools-1.26/debian/isapnptools.README.Debian
+@@ -0,0 +1,38 @@
++Starting with version 1.26-1 (2001-05-18), the sample configuration
++files are no longer installed in /etc.  Look for them in
++/usr/share/doc/isapnptools/examples.  
++
++The example files are not very useful, in fact.  Start with 
++"pnpdump >isapnp.conf" and then read "man isapnp.conf" to get started.
++
++
++The --reset option to pnpdump may be useful to reset some hardware at
++shutdown time.  However, the pnpdump manpage suggests this may cause a
++lockup, so this is not done by default.  Edit /etc/init.d/isapnp if
++you wish to do so.  See bug report #54686.
++
++
++		Kernel ISA PnP Support
++		----------------------
++
++The 2.4 linux kernels have built-in support for ISA PnP configuration,
++obviating the need for isapnptools.  The init script will silently
++exit if the running kernel has isa-pnp support built-in or compiled as
++a module.
++
++For many, the kernel PnP configuration will be sufficient (it seems to
++be better than isapnptools).  If your card does not get properly
++configured, you will have to peruse the file Documentation/isapnp.txt
++from the kernel sources and come up with the required commands
++to configure it.  Put them into a file, e.g. /etc/proc-isapnp.conf,
++and arrange for this to be read during boot.  If isa-pnp is compiled
++as a module, you can use a module post-install rule such as
++the following:
++
++  post-install isa-pnp cat /etc/proc-isapnp.conf > /proc/isapnp
++
++Install this line into a file in /etc/modutils of your choosing
++(e.g. /etc/modutils/local) then run "update-modules".
++
++
++ -- Steve M. Robbins <smr@debian.org>, Sat Dec  6 23:35:46 2003
+--- isapnptools-1.26.orig/debian/isapnptools.docs
++++ isapnptools-1.26/debian/isapnptools.docs
+@@ -0,0 +1,8 @@
++AUTHORS
++NEWS
++README
++doc/README.ide
++doc/README.initrd
++doc/README.modules
++doc/isapnpfaq.txt
++
+--- isapnptools-1.26.orig/debian/isapnptools.examples
++++ isapnptools-1.26/debian/isapnptools.examples
+@@ -0,0 +1,2 @@
++etc/isapnp.gone
++etc/isapnp.conf
+--- isapnptools-1.26.orig/debian/isapnptools.files
++++ isapnptools-1.26/debian/isapnptools.files
+@@ -0,0 +1,4 @@
++sbin
++usr/sbin
++usr/share/man
++
+--- isapnptools-1.26.orig/debian/isapnptools.init
++++ isapnptools-1.26/debian/isapnptools.init
+@@ -0,0 +1,29 @@
++#! /bin/sh
++
++# /etc/init.d/isapnp: configure Plug and Play boards
++
++test -x /sbin/isapnp || exit 0
++
++# kernel 2.3.x and later can handle Pnp directly
++if test -e /proc/isapnp || \
++   test -e /lib/modules/`/bin/uname -r`/kernel/drivers/pnp/isa-pnp.o
++then
++    exit 0
++fi
++
++case "$1" in
++    start)
++	if [ -r /etc/isapnp.conf ]; then
++	    /sbin/isapnp /etc/isapnp.conf
++	fi
++	;;
++	
++    stop|force-reload|restart)
++	;;
++
++    *)
++	echo "Usage: $0 {start|stop|restart|force-reload}"
++	exit 1
++esac
++
++exit 0
+--- isapnptools-1.26.orig/debian/libisapnp-dev.docs
++++ isapnptools-1.26/debian/libisapnp-dev.docs
+@@ -0,0 +1,4 @@
++AUTHORS
++NEWS
++README
++doc/README.lib
+--- isapnptools-1.26.orig/debian/libisapnp-dev.examples
++++ isapnptools-1.26/debian/libisapnp-dev.examples
+@@ -0,0 +1,2 @@
++demos/demo.c
++demos/demo2.c
+--- isapnptools-1.26.orig/debian/libisapnp-dev.files
++++ isapnptools-1.26/debian/libisapnp-dev.files
+@@ -0,0 +1,2 @@
++usr/include
++usr/lib
+--- isapnptools-1.26.orig/debian/postrm
++++ isapnptools-1.26/debian/postrm
+@@ -0,0 +1,7 @@
++#!/bin/sh -e
++
++#DEBHELPER#
++
++if [ "$1" = "purge" ] ; then
++	rm -f /etc/isapnp.conf /etc/isapnp.gone
++fi
+--- isapnptools-1.26.orig/debian/rules
++++ isapnptools-1.26/debian/rules
+@@ -0,0 +1,115 @@
++#!/usr/bin/make -f
++# 
++# Adapted from /usr/share/doc/debhelper/examples/rules.multi2
++
++# Uncomment this to turn on verbose mode. 
++#export DH_VERBOSE=1
++
++# This is the debhelper compatibility version to use.
++export DH_COMPAT=3
++
++# This has to be exported to make some magic below work.
++export DH_OPTIONS
++
++# Suppress accidental execution of the auto-* tools; see
++# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
++no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
++        AUTOCONF="`pwd`/missing autoconf" \
++        AUTOMAKE="`pwd`/missing automake" \
++        AUTOHEADER="`pwd`/missing autoheader"
++
++# Customization follows Debian policy 11.1.
++#
++# Variable DEB_BUILD_OPTIONS can have "noopt" or "nostrip"
++
++CFLAGS = -Wall -g
++export CFLAGS
++
++ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
++CFLAGS += -O0
++else
++CFLAGS += -O2
++endif
++
++ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
++INSTALL_PROGRAM += -s
++endif
++
++build: build-stamp
++build-stamp:
++	dh_testdir
++
++	rm -f config.cache
++	./configure --prefix=/usr \
++		--mandir=/usr/share/man --infodir=/usr/share/info
++	$(MAKE) $(no_auto_tools)
++
++	touch build-stamp
++
++clean:
++	dh_testdir
++	dh_testroot
++	rm -f build-stamp
++
++	-cd demos && $(MAKE) distclean
++	-$(MAKE) distclean
++
++	dh_clean
++
++install: DH_OPTIONS=
++install: build
++	dh_testdir
++	dh_testroot
++	dh_clean -k
++	dh_installdirs
++
++	$(MAKE) DESTDIR=`pwd`/debian/tmp install
++	# Move isapnp to /sbin
++	mkdir debian/tmp/sbin
++	mv debian/tmp/usr/sbin/isapnp debian/tmp/sbin
++
++	dh_movefiles
++
++# This single target is used to build all the packages, all at once, or
++# one at a time. So keep in mind: any options passed to commands here will
++# affect _all_ packages. Anything you want to only affect one package
++# should be put in another target, such as the install target.
++binary-common:
++	dh_testdir
++	dh_testroot
++#	dh_installdebconf
++	dh_installdocs
++	dh_installexamples
++	# override init script name, for historical reasons
++	dh_installinit --no-restart-on-upgrade \
++		--init-script=isapnp \
++		-- start 15 S .
++#	dh_installman
++	dh_installinfo
++	dh_installchangelogs ChangeLog
++#	dh_link
++	dh_strip
++	dh_compress
++	dh_fixperms
++#	dh_makeshlibs
++	dh_installdeb
++	dh_shlibdeps
++	dh_gencontrol
++	dh_md5sums
++	dh_builddeb
++
++# Build architecture independant packages using the common target.
++binary-indep: build install
++# (Uncomment this next line if you have such packages.)
++#	 $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
++
++# Build architecture dependant packages using the common target.
++binary-arch: build install
++	$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
++
++# Any other binary targets build just one binary package at a time.
++binary-%: build install
++	make -f debian/rules binary-common DH_OPTIONS=-p$*
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary install
+--- isapnptools-1.26.orig/src/callbacks.c
++++ isapnptools-1.26/src/callbacks.c
+@@ -51,6 +51,7 @@
+ #include <stdio.h>
+ #include <errno.h>
+ #include <string.h>
++#include <stdlib.h>
+ 
+ /****************************************************************************/
+ 
+--- isapnptools-1.26.orig/src/isapnp_main.l
++++ isapnptools-1.26/src/isapnp_main.l
+@@ -363,7 +363,7 @@
+ 	return 0;
+ }
+ 
+-static unsigned char serial_identifier[NUM_CARDS+1][IDENT_LEN];
++unsigned char serial_identifier[NUM_CARDS+1][IDENT_LEN];
+ static char *boardid[NUM_CARDS+1];
+ static unsigned long serno[NUM_CARDS+1];
+ 
+--- isapnptools-1.26.orig/src/resource.c
++++ isapnptools-1.26/src/resource.c
+@@ -24,6 +24,9 @@
+ #include <string.h>
+ 
+ #ifdef ENABLE_PCI
++#define __KERNEL__
++#include <linux/mod_devicetable.h>
++#undef __KERNEL__
+ #include <linux/pci.h>
+ #endif
+ 
diff --git a/source/a/isapnptools/slack-desc b/source/a/isapnptools/slack-desc
new file mode 100644
index 00000000..8646def6
--- /dev/null
+++ b/source/a/isapnptools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+isapnptools: isapnptools (ISA Plug-And-Play tools)
+isapnptools:
+isapnptools: These programs allow ISA Plug-And-Play devices to be configured
+isapnptools: on a Linux machine.
+isapnptools:
+isapnptools:
+isapnptools:
+isapnptools:
+isapnptools:
+isapnptools:
+isapnptools:
diff --git a/source/a/kbd/kbd.SlackBuild b/source/a/kbd/kbd.SlackBuild
index ddcd9670..1b2147d0 100755
--- a/source/a/kbd/kbd.SlackBuild
+++ b/source/a/kbd/kbd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=kbd
-VERSION=1.15.2
-BUILD=${BUILD:-1}
+VERSION=1.15.3
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -34,7 +34,7 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j4}
+NUMJOBS=${NUMJOBS:--j6}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
@@ -49,7 +49,7 @@ cd $TMP
 
 # Extract source:
 rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/sources/$PKGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/sources/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION
 
 # Make sure ownerships and permissions are sane:
@@ -69,9 +69,12 @@ find . -perm 555 -exec chmod 755 {} \;
 # Apply patches:
 # These are taken from Fedora's SRPM:
 zcat $CWD/sources/kbd-1.15.2-po.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/sources/kbd-1.15-keycodes-man.patch | patch -p1 --verbose || exit 1
-zcat $CWD/sources/kbd-1.15-unicode_start.patch | patch -p1 --verbose || exit 1
-zcat $CWD/sources/kbd-1.15-resizecon-x86_64.patch | patch -p1 --verbose || exit 1
+zcat $CWD/sources/kbd-1.15-keycodes-man.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/sources/kbd-1.15-unicode_start.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/sources/kbd-1.15-resizecon-x86_64.patch.gz | patch -p1 --verbose || exit 1
+
+# This is from Mandriva's SRPM:
+zcat $CWD/sources/kbd-1.15.3-fix-es-translation.patch.gz | patch -p1 --verbose || exit 1
 
 # This is from Fedora's spec file:
 # 7-bit maps are obsolete; so are non-euro maps
@@ -114,6 +117,12 @@ make install DESTDIR=$PKG || exit 1
   mv -fv usr/bin/loadkeys bin/
   cd usr/bin ; ln -vsf ../../bin/loadkeys . )
 
+# Build/install resizecons:
+( cd src
+  make resizecons
+  cp resizecons $PKG/usr/bin
+)
+
 # ro_win.map.gz is useless
 rm -fv $PKG/usr/share/kbd/keymaps/i386/qwerty/ro_win.map.gz
 
@@ -197,10 +206,20 @@ config etc/rc.d/rc.font.new
 
 EOF
 
-# Compress man pages:
-( cd $PKG/usr/man
-  find . -name "*.?" -type f | xargs gzip -9
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 # Install package description:
 install -vpm644 $CWD/slack-desc $PKG/install/
@@ -212,5 +231,5 @@ install -vpm644 $CWD/slack-desc $PKG/install/
 )
 
 cd $PKG
-makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-#EOF
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign b/source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign
deleted file mode 100644
index 39f3c022..00000000
--- a/source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.9 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBLwPHZyGugalF9Dw4RAhiyAJ9DdLbizzsoJi87OjQ8VzyNsRnr2QCeJ9zg
-MOKY0UbkCZyUALLyzxF2bKE=
-=Ou46
------END PGP SIGNATURE-----
diff --git a/source/a/kbd/sources/kbd-1.15.3-fix-es-translation.patch b/source/a/kbd/sources/kbd-1.15.3-fix-es-translation.patch
new file mode 100644
index 00000000..2d76cd9f
--- /dev/null
+++ b/source/a/kbd/sources/kbd-1.15.3-fix-es-translation.patch
@@ -0,0 +1,12 @@
+diff -Naur kbd-1.15.3//po/es.po kbd-1.15.3.tpg//po/es.po
+--- kbd-1.15.3//po/es.po	2011-05-14 21:12:49.000000000 +0000
++++ kbd-1.15.3.tpg//po/es.po	2011-06-19 12:29:55.000000000 +0000
+@@ -1363,7 +1363,7 @@
+ #: src/setfont.c:682
+ #, c-format
+ msgid "Saved %d-char %dx%d font file on %s\n"
+-msgstr "Se ha guardado el fichero de tipos %2$dx%3$d de %1$d caracteres en %s\n"
++msgstr "Se ha guardado el fichero de tipos %dx%d de %d caracteres en %s\n"
+ 
+ #: src/setkeycodes.c:21
+ #, c-format
diff --git a/source/a/kernel-firmware/kernel-firmware.SlackBuild b/source/a/kernel-firmware/kernel-firmware.SlackBuild
new file mode 100755
index 00000000..66445ea8
--- /dev/null
+++ b/source/a/kernel-firmware/kernel-firmware.SlackBuild
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=kernel-firmware
+VERSION=${VERSION:-$(date +%Y%m%d)git}
+ARCH=noarch
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $PKG
+git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
+find . -name ".git*" -exec rm -rf "{}" \;
+chown -R root:root .
+mkdir -p lib
+mv linux-firmware lib/firmware
+
+# Install documentation link:
+mkdir -p $PKG/usr/doc
+( cd $PKG/usr/doc
+  ln -sf /lib/firmware kernel-firmware-$VERSION
+)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/kernel-firmware/slack-desc b/source/a/kernel-firmware/slack-desc
new file mode 100644
index 00000000..5231a426
--- /dev/null
+++ b/source/a/kernel-firmware/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+kernel-firmware: kernel-firmware (Firmware for the kernel)
+kernel-firmware:
+kernel-firmware: These are firmware files for the Linux kernel.
+kernel-firmware:
+kernel-firmware: You'll need these to use certain hardware drivers with Linux.
+kernel-firmware:
+kernel-firmware: Upstream site:  
+kernel-firmware:
+kernel-firmware: git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
+kernel-firmware:
+kernel-firmware:
diff --git a/source/a/kmod/kmod.SlackBuild b/source/a/kmod/kmod.SlackBuild
new file mode 100755
index 00000000..0863d0e3
--- /dev/null
+++ b/source/a/kmod/kmod.SlackBuild
@@ -0,0 +1,147 @@
+#!/bin/sh
+
+# Slackware build script for kmod
+
+# Copyright 2011, 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=kmod
+VERSION=${VERSION:-9}
+BUILD=${BUILD:-3}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Fix paths in manual pages
+sed -i "s,/usr/lib,/lib,g" man/*
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/lib${LIBDIRSUFFIX} \
+  --bindir=/sbin \
+  --sbindir=/sbin \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-xz \
+  --with-zlib \
+  --build=$ARCH-slackware-linux || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Create symlinks for the usual module-init-tools stuff:
+( cd $PKG/sbin
+  for file in depmod insmod lsmod modinfo modprobe rmmod ; do
+    ln -sf kmod $file
+  done
+)
+
+# Link lsmod into /bin
+mkdir -p $PKG/bin
+( cd $PKG/bin ; ln -sf /sbin/lsmod . )
+
+mkdir -p $PKG/etc/modprobe.d
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
+mv $PKG/lib${LIBDIRSUFFIX}/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX}
+rm -f $PKG/lib${LIBDIRSUFFIX}/{*.so,*.la}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  ln -sf ../../lib${LIBDIRSUFFIX}/libkmod.so.? libkmod.so
+)
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING* NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/kmod/slack-desc b/source/a/kmod/slack-desc
new file mode 100644
index 00000000..78507311
--- /dev/null
+++ b/source/a/kmod/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+kmod: kmod (kernel module tools and library)
+kmod:
+kmod: kmod is a set of tools to handle common tasks with Linux kernel 
+kmod: modules like insert, remove, list, check properties, resolve 
+kmod: dependencies and aliases.  The aim is to be compatible with the tools,
+kmod: configurations and indexes from the module-init-tools project.
+kmod:
+kmod: These tools are designed on top of libkmod, a library that is 
+kmod: shipped with kmod.
+kmod:
+kmod: Project home:  ftp://ftp.kernel.org/pub/linux/utils/kernel/kmod/
diff --git a/source/a/lilo/lilo.SlackBuild b/source/a/lilo/lilo.SlackBuild
index 2e7902cd..2df7618d 100755
--- a/source/a/lilo/lilo.SlackBuild
+++ b/source/a/lilo/lilo.SlackBuild
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-22.8}
-BUILD=${BUILD:-16}
+VERSION=${VERSION:-23.2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -43,15 +43,18 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf lilo-$VERSION
-tar xvf $CWD/lilo-$VERSION.src.tar.gz || exit 1
+tar xvf $CWD/lilo-$VERSION.tar.gz || exit 1
 cd lilo-$VERSION
 chown -R root:root .
 
-# This is needed for LVM+udev+devtmpfs
-zcat $CWD/lilo.use_major_minor_instead_lvm_name.diff.gz | patch -p1 --verbose || exit 1
+# Obsolete patch?
+## This is needed for LVM+udev+devtmpfs
+#( cd src
+#  zcat $CWD/lilo.use_major_minor_instead_lvm_name.diff.gz | patch -p1 --verbose || exit 1
+#)
 
 make || exit 1
-make install ROOT=$PKG
+make -i install DESTDIR=$PKG || exit 1
 
 # Add a Slackware logo boot menu (sorry, couldn't resist):
 if [ "$ARCH" = "x86_64" -a -f $CWD/slack64.bmp ]; then
@@ -61,13 +64,18 @@ else
 fi
 chmod 644 $PKG/boot/slack.bmp
 
-# We don't need to add this empty directory:
-rmdir $PKG/etc
+# Remove non-Slackware litter:
+( cd $PKG/boot
+  rm -f coffee.bmp *debian*
+)
+rm -r $PKG/etc/{initramfs,kernel}
 
 # Add Slackware's 'liloconfig' utility:
 mkdir -p $PKG/sbin
 cp -a $CWD/liloconfig $PKG/sbin/liloconfig
 chmod 755 $PKG/sbin/liloconfig
+# Hey, you're stomping on our name!  Plus, it doesn't work.
+rm -f $PKG/usr/sbin/liloconfig
 mkdir -p $PKG/var/log/setup
 cp -a $CWD/setup.liloconfig $PKG/var/log/setup/setup.liloconfig
 cp -a $CWD/text.lilohelp $PKG/var/log/setup/text.lilohelp
diff --git a/source/a/lilo/liloconfig b/source/a/lilo/liloconfig
index 7dccd3d6..d8bc02dd 100644
--- a/source/a/lilo/liloconfig
+++ b/source/a/lilo/liloconfig
@@ -53,7 +53,7 @@ if [ ! -d "$T_PX" ]; then
 fi
 
 # Determine LILO documentation directory:
-LILODOCDIR="$(ls -d /usr/doc/lilo-* | tail -n 1)"
+LILODOCDIR="$(ls -d $T_PX/usr/doc/lilo-* 2> /dev/null | tail -n 1)"
 if [ ! -d "$LILODOCDIR" ]; then
   LILODOCDIR="/usr/doc/lilo/"
 fi
@@ -236,14 +236,12 @@ hit ENTER to continue.\n\
 }
 
 ask_utf() {
- if [ "$(uname -r | cut -f 3 -d .)" -gt "23" ]; then
  dialog --defaultno --title "USE UTF-8 TEXT CONSOLE?" --yesno \
 "Beginning with the 2.6.24 kernel, the text consoles default to UTF-8 mode.  \
 Unless you are using a UTF-8 locale (\$LANG setting), using the old default \
 of a non-UTF text console is safer until some issues with various console \
 programs are addressed.  This option has no effect on the use of UTF-8 with X.  \
 \"No\" is the safe choice here." 10 70
- fi
 }
 
 # This function scans for bootable partitions (making some assumptions along
@@ -584,12 +582,10 @@ checkbootsplash()
    cp -a $LILODOCDIR/sample/sl1337.bmp /boot/slack.bmp
   fi
  fi
- # Thanks to amrit@slackware.com:
- if grep -wq 13.37.0 /etc/slackware-version ; then
-  if ls -l /etc/lilo.conf | grep -q 13:37 ; then
-   if [ -r $LILODOCDIR/sample/sl1337.bmp ]; then
-    cp -a $LILODOCDIR/sample/sl1337.bmp /boot/slack.bmp
-   fi
+ # Mayan calendar easter egg
+ if [ "$(date "+%Y%m%d")" = "20121221" ]; then
+  if [ -r $LILODOCDIR/sample/slack14.0.2012.bmp ]; then
+   cp -a $LILODOCDIR/sample/slack14.0.2012.bmp /boot/slack.bmp
   fi
  fi
 }
diff --git a/source/a/lilo/slack14.0.2012.bmp b/source/a/lilo/slack14.0.2012.bmp
new file mode 100644
index 00000000..ea217657
--- /dev/null
+++ b/source/a/lilo/slack14.0.2012.bmp
diff --git a/source/a/logrotate/logrotate.SlackBuild b/source/a/logrotate/logrotate.SlackBuild
index 76cc34ab..e38f2715 100755
--- a/source/a/logrotate/logrotate.SlackBuild
+++ b/source/a/logrotate/logrotate.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=${VERSION:-3.7.8}
+VERSION=${VERSION:-3.8.2}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -68,7 +68,7 @@ find . \
 zcat $CWD/logrotate.slackware.diff.gz | patch -p1 || exit 1
 
 make clean
-make EXTRA_CFLAGS="$SLKCFLAGS" || exit 1
+make RPM_OPT_FLAGS="$SLKCFLAGS" || exit 1
 strip logrotate
 
 mkdir -p $PKG/usr/sbin
@@ -87,14 +87,19 @@ mkdir -p $PKG/etc/cron.daily
 zcat $CWD/logrotate.cron.gz > $PKG/etc/cron.daily/logrotate
 chmod 0755 $PKG/etc/cron.daily/logrotate
 
-# Create the state directory
-mkdir -p $PKG/var/lib/logrotate
-
 mkdir -p $PKG/usr/doc/logrotate-$VERSION
 cp -a \
   CHANGES COPYING READM* \
     $PKG/usr/doc/logrotate-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/a/logrotate/logrotate.cron b/source/a/logrotate/logrotate.cron
index f91b3add..acdf65c2 100644
--- a/source/a/logrotate/logrotate.cron
+++ b/source/a/logrotate/logrotate.cron
@@ -1,3 +1,3 @@
 #!/bin/sh
-/usr/sbin/logrotate /etc/logrotate.conf
-[ $? != 0 ] && /usr/bin/logger -t logrotate "ALERT - exited abnormally."
+/usr/sbin/logrotate /etc/logrotate.conf \
+ || { /usr/bin/logger -t logrotate "ALERT - exited abnormally." && false ; }
diff --git a/source/a/logrotate/logrotate.slackware.diff b/source/a/logrotate/logrotate.slackware.diff
index e9126cee..6fa0436d 100644
--- a/source/a/logrotate/logrotate.slackware.diff
+++ b/source/a/logrotate/logrotate.slackware.diff
@@ -1,60 +1,25 @@
-diff -Nur logrotate-3.7.8.orig/Makefile logrotate-3.7.8/Makefile
---- logrotate-3.7.8.orig/Makefile	2008-05-19 05:25:54.000000000 -0500
-+++ logrotate-3.7.8/Makefile	2009-05-09 23:25:12.060201375 -0500
-@@ -1,7 +1,7 @@
- VERSION = $(shell awk '/Version:/ { print $$2 }' logrotate.spec)
- OS_NAME = $(shell uname -s)
- LFS = $(shell echo `getconf LFS_CFLAGS 2>/dev/null`)
--CFLAGS = -Wall -D_GNU_SOURCE -D$(OS_NAME) -DVERSION=\"$(VERSION)\" $(RPM_OPT_FLAGS) $(LFS)
-+CFLAGS = -Wall $(EXTRA_CFLAGS) -D_GNU_SOURCE -D$(OS_NAME) -DVERSION=\"$(VERSION)\" $(RPM_OPT_FLAGS) $(LFS)
- PROG = logrotate
- MAN = logrotate.8
- LOADLIBES = -lpopt
-diff -Nur logrotate-3.7.8.orig/config.c logrotate-3.7.8/config.c
---- logrotate-3.7.8.orig/config.c	2008-06-02 05:26:14.000000000 -0500
-+++ logrotate-3.7.8/config.c	2009-05-09 23:53:36.748287318 -0500
-@@ -33,8 +33,9 @@
- #define isblank(c) 	( (c) == ' ' || (c) == '\t' ) ? 1 : 0
- #endif
- 
--static char *defTabooExts[] = { ".rpmsave", ".rpmorig", "~", ",v",
+diff -Nur logrotate-3.8.0.orig//config.c logrotate-3.8.0/config.c
+--- logrotate-3.8.0.orig//config.c	2011-06-21 03:12:02.000000000 -0500
++++ logrotate-3.8.0/config.c	2011-08-22 15:53:25.199625138 -0500
+@@ -86,7 +86,8 @@
+ static char *defTabooExts[] = { ".rpmsave", ".rpmorig", "~", ",v",
+     ".disabled", ".dpkg-old", ".dpkg-dist", ".dpkg-new", ".cfsaved",
+     ".ucf-old", ".ucf-dist", ".ucf-new",
 -    ".rpmnew", ".swp", ".cfsaved", ".rhn-cfg-tmp-*"
-+static char *defTabooExts[] = { ".new", ".orig", ".old", ".bak",
-+    ".rpmsave", ".rpmorig", "~", ",v", ".rpmnew", ".swp", ".cfsaved", 
-+    ".rhn-cfg-tmp-*"
++    ".rpmnew", ".swp", ".cfsaved", ".rhn-cfg-tmp-*",
++    ".new", ".old", ".orig", ".bak"
  };
  static int defTabooCount = sizeof(defTabooExts) / sizeof(char *);
  
-diff -Nur logrotate-3.7.8.orig/config.h logrotate-3.7.8/config.h
---- logrotate-3.7.8.orig/config.h	2005-11-12 13:07:56.000000000 -0600
-+++ logrotate-3.7.8/config.h	2009-05-09 23:58:17.040241145 -0500
-@@ -13,7 +13,7 @@
- #define DEFAULT_MAIL_COMMAND "/usr/bin/mailx"
- #define COMPRESS_COMMAND "/usr/local/bin/gzip"
- #define UNCOMPRESS_COMMAND "/usr/local/bin/gunzip"
--#define STATEFILE "/var/log/logrotate.status"
-+#define STATEFILE "/var/lib/logrotate/status"
- #endif
- 
- /*
-diff -Nur logrotate-3.7.8.orig/logrotate.8 logrotate-3.7.8/logrotate.8
---- logrotate-3.7.8.orig/logrotate.8	2008-12-06 08:05:40.000000000 -0600
-+++ logrotate-3.7.8/logrotate.8	2009-05-09 23:56:45.137687740 -0500
-@@ -442,7 +442,7 @@
+diff -Nur logrotate-3.8.0.orig//logrotate.8 logrotate-3.8.0/logrotate.8
+--- logrotate-3.8.0.orig//logrotate.8	2011-06-21 03:12:02.000000000 -0500
++++ logrotate-3.8.0/logrotate.8	2011-08-22 15:56:12.247672243 -0500
+@@ -472,7 +472,7 @@
  for information on the taboo extensions). If a + precedes the list of
  extensions, the current taboo extension list is augmented, otherwise it
  is replaced. At startup, the taboo extension list 
--contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew, ~, .cfsaved and .rhn-cfg-tmp-*.
-+contains .new, .orig, .bak, .old, .rpmorig, .rpmsave, ,v, .swp, .rpmnew, ~, .cfsaved and .rhn-cfg-tmp-*.
+-contains .rpmsave, .rpmorig, ~, .disabled, .dpkg-old, .dpkg-dist, .dpkg-new, .cfsaved, .ucf-old, .ucf-dist, .ucf-new, .rpmnew, .swp, .cfsaved, .rhn-cfg-tmp-*
++contains .rpmsave, .rpmorig, ~, .disabled, .dpkg-old, .dpkg-dist, .dpkg-new, .cfsaved, .ucf-old, .ucf-dist, .ucf-new, .rpmnew, .swp, .cfsaved, .rhn-cfg-tmp-*, .new, .old, .orig, .bak
  
  .TP
  \fBweekly\fR
-@@ -459,7 +459,7 @@
- .SH FILES
- .PD 0
- .TP 27
--\fI/var/lib/logrotate.status\fR
-+\fI/var/lib/logrotate/status\fR
- Default state file.
- .TP 27
- \fI/etc/logrotate.conf\fR
diff --git a/source/a/lvm2/build_with_udev_165_and_later.diff b/source/a/lvm2/build_with_udev_165_and_later.diff
deleted file mode 100644
index 800e0f9f..00000000
--- a/source/a/lvm2/build_with_udev_165_and_later.diff
+++ /dev/null
@@ -1,21 +0,0 @@
-diff -Nur LVM2.2.02.84.orig//configure LVM2.2.02.84/configure
---- LVM2.2.02.84.orig//configure	2011-02-04 16:17:54.000000000 -0600
-+++ LVM2.2.02.84/configure	2011-02-09 20:23:11.818797797 -0600
-@@ -8768,7 +8768,7 @@
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
--LIBS="-ludev  $LIBS"
-+LIBS="-ludev -lrt $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
-@@ -8799,7 +8799,7 @@
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_udev_udev_queue_get_udev_is_active" >&5
- $as_echo "$ac_cv_lib_udev_udev_queue_get_udev_is_active" >&6; }
- if test "x$ac_cv_lib_udev_udev_queue_get_udev_is_active" = x""yes; then :
--  UDEV_PC="libudev"; UDEV_LIBS="-ludev"
-+  UDEV_PC="libudev"; UDEV_LIBS="-ludev -lrt"
- else
-   as_fn_error $? "bailing out... libudev library is required" "$LINENO" 5
- fi
diff --git a/source/a/lvm2/fix-build-with-udev-183.patch b/source/a/lvm2/fix-build-with-udev-183.patch
new file mode 100644
index 00000000..747926c4
--- /dev/null
+++ b/source/a/lvm2/fix-build-with-udev-183.patch
@@ -0,0 +1,44 @@
+From 57f4ebb843195bdd29c0d58e1659eeb0e9700081 Mon Sep 17 00:00:00 2001
+From: "Wulf C. Krueger" <philantrop@exherbo.org>
+Date: Sun, 27 May 2012 00:34:55 +0200
+Subject: [PATCH] lvm2: Fix build with systemd/udev-183.
+
+---
+ lib/misc/lvm-wrappers.c |    2 +-
+ tools/dmsetup.c         |    3 +--
+ 2 files changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/lib/misc/lvm-wrappers.c b/lib/misc/lvm-wrappers.c
+index 84f61a6..d4fcea6 100644
+--- a/lib/misc/lvm-wrappers.c
++++ b/lib/misc/lvm-wrappers.c
+@@ -72,7 +72,7 @@ const char *udev_get_dev_dir(void)
+ 		return NULL;
+ 	}
+ 
+-	return udev_get_dev_path(_udev);
++	return "/dev";
+ }
+ 
+ struct udev* udev_get_library_context(void)
+diff --git a/tools/dmsetup.c b/tools/dmsetup.c
+index 6934de8..e09b56c 100644
+--- a/tools/dmsetup.c
++++ b/tools/dmsetup.c
+@@ -1009,7 +1009,7 @@ static int _udevcookies(CMD_ARGS)
+ static int _set_up_udev_support(const char *dev_dir)
+ {
+ 	struct udev *udev;
+-	const char *udev_dev_dir;
++	const char *udev_dev_dir = "/dev";
+ 	size_t udev_dev_dir_len;
+ 	int dirs_diff;
+ 	const char *env;
+@@ -1031,7 +1031,6 @@ static int _set_up_udev_support(const char *dev_dir)
+ 			  _udev_cookie);
+ 
+ 	if (!(udev = udev_new()) ||
+-	    !(udev_dev_dir = udev_get_dev_path(udev)) ||
+ 	    !*udev_dev_dir) {
+ 		log_error("Could not get udev dev path.");
+ 		return 0;
diff --git a/source/a/lvm2/lvm2.SlackBuild b/source/a/lvm2/lvm2.SlackBuild
index e72897d0..349d5486 100755
--- a/source/a/lvm2/lvm2.SlackBuild
+++ b/source/a/lvm2/lvm2.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=$(echo LVM2.*.tar.xz | cut -f 2- -d . | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -68,8 +68,8 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Fix linking of librt until upstream does it correctly :)
-zcat $CWD/build_with_udev_165_and_later.diff.gz | patch -p1 --verbose || exit 1
+# Not yet.
+#zcat $CWD/fix-build-with-udev-183.patch.gz | patch -p1 --verbose || exit 1
 
 # uid 0 = root
 # gid 6 = disk
@@ -82,7 +82,6 @@ CFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --with-usrlibdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
-  --enable-static_link \
   --enable-realtime \
   --with-lvm1=internal \
   --enable-pkgconfig \
@@ -92,6 +91,11 @@ CFLAGS="$SLKCFLAGS" \
   --with-device-uid=0 \
   --with-device-gid=6 \
   --with-device-mode=0660 \
+  --with-default-locking-dir=/run/lock/lvm \
+  --with-default-run-dir=/run/lvm \
+  --with-clvmd-pidfile=/run/lvm/clvmd.pid \
+  --with-cmirrord-pidfile=/run/lvm/cmirrord.pid \
+  --with-dmeventd-pidfile=/run/lvm/dmeventd.pid \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -99,9 +103,6 @@ make install DESTDIR=$PKG || exit 1
 
 mv $PKG/etc/lvm/lvm.conf $PKG/etc/lvm/lvm.conf.new
 
-# Create default rundir
-mkdir -p $PKG/var/run/lvm
-
 if [ -d $PKG/usr/share/man ]; then # --mandir was ignored
   mv $PKG/usr/share/man $PKG/usr
   rmdir $PKG/usr/share
@@ -116,27 +117,36 @@ mkdir -p $PKG/lib${LIBDIRSUFFIX}
   done
 )
 
-# The Makefile is DIW.
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  find . -name "*.so" -type l | cut -b3- | while read file ; do
-    # These two excluded files are in ./device-mapper/ subdir
-    if [ "$file" != "libdevmapper-event-lvm2mirror.so" -a "$file" != "libdevmapper-event-lvm2snapshot.so" ]; then
-      rm -f $file
-      ln -sf $(basename ../../lib${LIBDIRSUFFIX}/${file}.?.*) $file
-    fi
-  done
-)
-
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 mkdir -p $PKG/usr/doc/LVM2.$VERSION
 cp -a \
   COPYING* INSTALL README* VERSION WHATS_NEW \
   $PKG/usr/doc/LVM2.$VERSION
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/a/mdadm/mdadm-3.1.5.tar.bz2.sign b/source/a/mdadm/mdadm-3.1.5.tar.bz2.sign
deleted file mode 100644
index e5c72768..00000000
--- a/source/a/mdadm/mdadm-3.1.5.tar.bz2.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNiYLLyGugalF9Dw4RAjiBAJkB62x+h+B7v24ghmwIUa2p44sWNwCeIZfe
-sW9YOnjL/odR4C9Uuzu5pUQ=
-=qI9A
------END PGP SIGNATURE-----
diff --git a/source/a/mdadm/mdadm.SlackBuild b/source/a/mdadm/mdadm.SlackBuild
index 71f7c1a3..7ede6ab7 100755
--- a/source/a/mdadm/mdadm.SlackBuild
+++ b/source/a/mdadm/mdadm.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=3.1.5
+VERSION=${VERSION:-$(echo mdadm-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -34,22 +34,33 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-mdadm
 
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf mdadm-$VERSION
-tar xjvf $CWD/mdadm-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/mdadm-$VERSION.tar.?z || exit 1
 cd mdadm-$VERSION
 
-# With glibc on the initrd and installer, there is no longer a
-# good reason to compile this statically.  Commented out.
-## Build this static:
-##zcat $CWD/mdadm.static.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -57,28 +68,51 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# Treating all warnings as errors causes the build to fail.
+sed -i "s,-Werror,," Makefile
+
 make clean || exit 1
-make || exit 1
-#make mdadm.static
-make install DESTDIR=$PKG || exit 1
-#cat mdadm.static > $PKG/sbin/mdadm
-mv $PKG/usr/share/man $PKG/usr
-rmdir $PKG/usr/share
+make CXFLAGS="$SLKCFLAGS" MANDIR=/usr/man || exit 1
+make install MANDIR=/usr/man DESTDIR=$PKG || exit 1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 mkdir -p $PKG/etc
 cat mdadm.conf-example > $PKG/etc/mdadm.conf.new
-gzip -9 $PKG/usr/man/man?/*.?
+
 mkdir -p $PKG/usr/doc/mdadm-$VERSION
 cp -a \
-  ANNOUNCE-$VERSION COPYING* ChangeLog INSTALL TODO \
+  ANNOUNCE-$VERSION COPYING* INSTALL TODO \
   $PKG/usr/doc/mdadm-$VERSION
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
-makepkg -l y -c n $TMP/mdadm-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/mdadm-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/a/mdadm/mdadm.static.diff b/source/a/mdadm/mdadm.static.diff
deleted file mode 100644
index ae8a4642..00000000
--- a/source/a/mdadm/mdadm.static.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./Makefile.orig	2009-03-10 01:01:17.000000000 -0500
-+++ ./Makefile	2010-05-16 20:56:33.000000000 -0500
-@@ -55,7 +55,7 @@
- CFLAGS = $(CWFLAGS) $(CXFLAGS) -DSendmail=\""$(MAILCMD)"\" $(CONFFILEFLAGS)
- 
- # If you want a static binary, you might uncomment these
--# LDFLAGS = -static
-+LDFLAGS = -static
- # STRIP = -s
- 
- INSTALL = /usr/bin/install
diff --git a/source/a/minicom/minicom.SlackBuild b/source/a/minicom/minicom.SlackBuild
index be060ec2..19ec515f 100755
--- a/source/a/minicom/minicom.SlackBuild
+++ b/source/a/minicom/minicom.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=2.5
+VERSION=2.6
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j6}
@@ -56,7 +56,7 @@ mkdir -p $TMP $PKG
 # minicom
 cd $TMP
 rm -rf minicom-$VERSION
-tar xzvf $CWD/minicom-$VERSION.tar.gz || exit 1
+tar xvf $CWD/minicom-$VERSION.tar.xz || exit 1
 cd minicom-$VERSION
 
 # The following command renames the internal implementation of getline
@@ -79,7 +79,7 @@ make install DESTDIR=$PKG || exit 1
 
 mkdir -p $PKG/etc
 zcat $CWD/minicom.users.gz > $PKG/etc/minicom.users.new
-printf "# Machine-generated file - use "minicom -s" to change parameters.\n" \
+printf "# Machine-generated file - use \"minicom -s\" to change parameters.\n" \
        > $PKG/etc/minirc.dfl.new
 
 mkdir -p $PKG/usr/doc/minicom-$VERSION
@@ -97,8 +97,6 @@ if [ -r ChangeLog ]; then
 fi
 
 # lzrz
-# If autotools causes failure here (which it probably will), temporarily 
-# move /usr/bin/auto{conf,header,make} out of the way and it should work... 
 
 cd $TMP
 rm -rf lrzsz-990823
@@ -119,6 +117,9 @@ for i in debian/patches/* ; do patch -p1 < $i || exit 1 ; done
   --mandir=/usr/man \
   --build=$ARCH-slackware-linux
 
+touch stamp-h.in # to stop autoheader from running
+touch -d yesterday aclocal.m4 # to stop automake from running
+
 make $NUMJOBS || make || exit 1
 
 cp src/lrz src/lsz $PKG/usr/bin
diff --git a/source/a/mkinitrd/README.initrd b/source/a/mkinitrd/README.initrd
index ca95c332..c10bb630 100644
--- a/source/a/mkinitrd/README.initrd
+++ b/source/a/mkinitrd/README.initrd
@@ -1,10 +1,10 @@
 
 Slackware initrd mini HOWTO
 by Patrick Volkerding, volkerdi@slackware.com
-Thu Apr  7 06:02:26 CDT 2011
+@DATE@
 
 This document describes how to create and install an initrd, which may be 
-required to use the 2.6 kernel.  Also see "man mkinitrd".
+required to use some features of the kernel.  Also see "man mkinitrd".
 
 1.  What is an initrd?
 2.  Why to I need an initrd?
@@ -33,26 +33,26 @@ flexible to ship a generic kernel and a set of kernel modules for it.
 
 The easiest way to make the initrd is to use the mkinitrd script included 
 in Slackware's mkinitrd package.  We'll walk through the process of 
-upgrading to the generic 2.6.37.6 Linux kernel using the packages
+upgrading to the generic @KERNEL_VERSION@ Linux kernel using the packages
 found in Slackware's slackware/a/ directory.
 
 First, make sure the kernel, kernel modules, and mkinitrd package are 
 installed (the current version numbers might be a little different, so 
 this is just an example):
 
-  installpkg kernel-generic-2.6.37.6-i686-1.tgz
-  installpkg kernel-modules-2.6.37.6-i686-1.tgz
-  installpkg mkinitrd-1.1.0-i486-1.tgz
+  installpkg kernel-generic-@KERNEL_VERSION@-@ARCH@-@BUILD@.tgz
+  installpkg kernel-modules-@KERNEL_VERSION@-@ARCH@-@BUILD@.tgz
+  installpkg mkinitrd-@MKINITRD_VERSION@-@ARCH@-@BUILD@.tgz
 
 Change into the /boot directory:
 
   cd /boot
 
-Now you'll want to run "mkinitrd".  I'm using reiserfs for my root
-filesystem, and since it's an IDE system the reiserfs module will be
-the only one I need to load:
+Now you'll want to run "mkinitrd".  I'm using ext4 for my root
+filesystem, and since mkinitrd should figure out any other modules
+it requires, I shouldn't need to specify any others:
 
-  mkinitrd -c -k 2.6.37.6 -m reiserfs
+  mkinitrd -c -k @KERNEL_VERSION@ -m ext4
 
 This should do two things.  First, it will create a directory
 /boot/initrd-tree containing the initrd's filesystem.  Then it will
@@ -61,10 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and
 then run mkinitrd again without options to rebuild the image.  That's
 optional, though, and only advanced users will need to think about that.
 
-Here's another example:  Build an initrd image using Linux 2.6.37.6
+Here's another example:  Build an initrd image using Linux @KERNEL_VERSION@
 kernel modules for a system with an ext3 root partition on /dev/sdb3:
 
-  mkinitrd -c -k 2.6.37.6 -m ext3 -f ext3 -r /dev/sdb3
+  mkinitrd -c -k @KERNEL_VERSION@ -m ext3 -f ext3 -r /dev/sdb3
 
 
 4.  Now that I've built an initrd, how do I use it?
@@ -76,10 +76,10 @@ initrd.  Here's an example section of lilo.conf showing how this is
 done:
 
 # Linux bootable partition config begins
-image = /boot/vmlinuz-generic-2.6.37.6
+image = /boot/vmlinuz-generic-@KERNEL_VERSION@
   initrd = /boot/initrd.gz
   root = /dev/sda6
-  label = Lnx26376
+  label = @LILO_KERNEL_NAME@
   read-only
 # Linux bootable partition config ends
 
diff --git a/source/a/mkinitrd/busybox-dot-config b/source/a/mkinitrd/busybox-dot-config
index 35b32a4f..09ac6817 100644..120000
--- a/source/a/mkinitrd/busybox-dot-config
+++ b/source/a/mkinitrd/busybox-dot-config
@@ -1,990 +1 @@
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.18.4
-# Fri Mar 25 23:08:06 2011
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-CONFIG_DESKTOP=y
-# CONFIG_EXTRA_COMPAT is not set
-CONFIG_INCLUDE_SUSv2=y
-# CONFIG_USE_PORTABLE_CODE is not set
-CONFIG_PLATFORM_LINUX=y
-CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-CONFIG_FEATURE_COMPRESS_USAGE=y
-CONFIG_FEATURE_INSTALLER=y
-CONFIG_INSTALL_NO_USR=y
-CONFIG_LOCALE_SUPPORT=y
-CONFIG_UNICODE_SUPPORT=y
-# CONFIG_UNICODE_USING_LOCALE is not set
-# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
-CONFIG_SUBST_WCHAR=63
-CONFIG_LAST_SUPPORTED_WCHAR=767
-# CONFIG_UNICODE_COMBINING_WCHARS is not set
-# CONFIG_UNICODE_WIDE_WCHARS is not set
-# CONFIG_UNICODE_BIDI_SUPPORT is not set
-# CONFIG_UNICODE_NEUTRAL_TABLE is not set
-# CONFIG_UNICODE_PRESERVE_BROKEN is not set
-CONFIG_LONG_OPTS=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_WTMP=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_PIDFILE=y
-CONFIG_FEATURE_SUID=y
-CONFIG_FEATURE_SUID_CONFIG=y
-CONFIG_FEATURE_SUID_CONFIG_QUIET=y
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-# CONFIG_PIE is not set
-# CONFIG_NOMMU is not set
-# CONFIG_BUILD_LIBBUSYBOX is not set
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-CONFIG_CROSS_COMPILER_PREFIX=""
-CONFIG_EXTRA_CFLAGS=""
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_DEBUG_PESSIMIZE is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-
-#
-# Installation Options ("make install" behavior)
-#
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/tmp/package-mkinitrd/usr/share/mkinitrd/initrd-tree"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-# CONFIG_FEATURE_FAST_TOP is not set
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_VI=y
-CONFIG_FEATURE_EDITING_HISTORY=64
-# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
-# CONFIG_FEATURE_NON_POSIX_CP is not set
-CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
-CONFIG_FEATURE_COPYBUF_KB=4
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-# CONFIG_FEATURE_HWIB is not set
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_FEATURE_SEAMLESS_XZ=y
-# CONFIG_FEATURE_SEAMLESS_LZMA is not set
-CONFIG_FEATURE_SEAMLESS_BZ2=y
-CONFIG_FEATURE_SEAMLESS_GZ=y
-CONFIG_FEATURE_SEAMLESS_Z=y
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-# CONFIG_FEATURE_AR_CREATE is not set
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_FEATURE_CPIO_O=y
-CONFIG_FEATURE_CPIO_P=y
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_GZIP=y
-CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
-CONFIG_LZOP=y
-CONFIG_LZOP_COMPR_HIGH=y
-CONFIG_RPM2CPIO=y
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_AUTODETECT=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-# CONFIG_FEATURE_TAR_TO_COMMAND is not set
-CONFIG_FEATURE_TAR_UNAME_GNAME=y
-CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
-# CONFIG_FEATURE_TAR_SELINUX is not set
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_LZMA=y
-CONFIG_UNXZ=y
-CONFIG_XZ=y
-CONFIG_UNZIP=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-# CONFIG_FEATURE_DATE_NANO is not set
-# CONFIG_FEATURE_DATE_COMPAT is not set
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_BASE64=y
-CONFIG_CAL=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_FEATURE_CP_LONG_OPTIONS=y
-CONFIG_CUT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_FEATURE_DF_FANCY=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_FSYNC=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SHA256SUM=y
-CONFIG_SHA512SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-# CONFIG_FEATURE_FLOAT_SLEEP is not set
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TOUCH=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum, sha256sum, sha512sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_FGCONSOLE=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETFONT=y
-CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
-CONFIG_DEFAULT_SETFONT_DIR="/usr/share/kbd/consolefonts"
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-CONFIG_SHOWKEY=y
-
-#
-# Common options for loadfont and setfont
-#
-# CONFIG_FEATURE_LOADFONT_PSF2 is not set
-CONFIG_FEATURE_LOADFONT_RAW=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-CONFIG_PIPE_PROGRESS=y
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-CONFIG_FEATURE_RUN_PARTS_FANCY=y
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_PATCH=y
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_LIBM=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_ED=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_8BIT=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_ASK_TERMINAL=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-# CONFIG_FEATURE_FIND_DELETE is not set
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_FEATURE_FIND_LINKS=y
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-# CONFIG_BOOTCHARTD is not set
-# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
-# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
-CONFIG_HALT=y
-# CONFIG_FEATURE_CALL_TELINIT is not set
-CONFIG_TELINIT_PATH=""
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_KILL_REMOVED=y
-CONFIG_FEATURE_KILL_DELAY=10
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-# CONFIG_FEATURE_INITRD is not set
-CONFIG_INIT_TERMINAL_TYPE="linux"
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_ADD_SHELL=y
-CONFIG_REMOVE_SHELL=y
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_PWD_GRP is not set
-# CONFIG_USE_BB_SHADOW is not set
-CONFIG_USE_BB_CRYPT=y
-CONFIG_USE_BB_CRYPT_SHA=y
-CONFIG_ADDUSER=y
-# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
-CONFIG_FEATURE_CHECK_NAMES=y
-CONFIG_FIRST_SYSTEM_ID=1000
-CONFIG_LAST_SYSTEM_ID=12000
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELUSER=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_GETTY=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-# CONFIG_FEATURE_SECURETTY is not set
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-CONFIG_CRYPTPW=y
-CONFIG_CHPASSWD=y
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-CONFIG_TUNE2FS=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_MODINFO=y
-# CONFIG_MODPROBE_SMALL is not set
-# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
-# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
-CONFIG_INSMOD=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_DEPMOD=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_2_4_MODULES=y
-# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
-
-#
-# Linux System Utilities
-#
-CONFIG_BLOCKDEV=y
-CONFIG_REV=y
-CONFIG_ACPID=y
-CONFIG_FEATURE_ACPID_COMPAT=y
-CONFIG_BLKID=y
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-CONFIG_FEATURE_OSF_LABEL=y
-CONFIG_FEATURE_GPT_LABEL=y
-CONFIG_FEATURE_FDISK_ADVANCED=y
-CONFIG_FINDFS=y
-# CONFIG_FLOCK is not set
-CONFIG_FREERAMDISK=y
-CONFIG_FSCK_MINIX=y
-# CONFIG_MKFS_EXT2 is not set
-CONFIG_MKFS_MINIX=y
-CONFIG_FEATURE_MINIX2=y
-# CONFIG_MKFS_REISER is not set
-CONFIG_MKFS_VFAT=y
-CONFIG_GETOPT=y
-CONFIG_FEATURE_GETOPT_LONG=y
-CONFIG_HEXDUMP=y
-CONFIG_FEATURE_HEXDUMP_REVERSE=y
-CONFIG_HD=y
-CONFIG_HWCLOCK=y
-CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
-CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_LSPCI=y
-CONFIG_LSUSB=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_RENAME=y
-CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-CONFIG_FEATURE_MKSWAP_UUID=y
-CONFIG_MORE=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_FAKE=y
-# CONFIG_FEATURE_MOUNT_VERBOSE is not set
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_LABEL=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_RDEV=y
-CONFIG_READPROFILE=y
-CONFIG_RTCWAKE=y
-CONFIG_SCRIPT=y
-CONFIG_SCRIPTREPLAY=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_FEATURE_SWAPON_PRI=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-CONFIG_VOLUMEID=y
-
-#
-# Filesystem/Volume identification
-#
-CONFIG_FEATURE_VOLUMEID_EXT=y
-# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
-CONFIG_FEATURE_VOLUMEID_REISERFS=y
-CONFIG_FEATURE_VOLUMEID_FAT=y
-CONFIG_FEATURE_VOLUMEID_HFS=y
-CONFIG_FEATURE_VOLUMEID_JFS=y
-CONFIG_FEATURE_VOLUMEID_XFS=y
-CONFIG_FEATURE_VOLUMEID_NTFS=y
-CONFIG_FEATURE_VOLUMEID_ISO9660=y
-CONFIG_FEATURE_VOLUMEID_UDF=y
-CONFIG_FEATURE_VOLUMEID_LUKS=y
-CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
-CONFIG_FEATURE_VOLUMEID_CRAMFS=y
-CONFIG_FEATURE_VOLUMEID_ROMFS=y
-CONFIG_FEATURE_VOLUMEID_SYSV=y
-# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
-CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_CONSPY is not set
-# CONFIG_NANDWRITE is not set
-# CONFIG_NANDDUMP is not set
-# CONFIG_UBIATTACH is not set
-# CONFIG_UBIDETACH is not set
-CONFIG_ADJTIMEX=y
-CONFIG_BBCONFIG=y
-CONFIG_FEATURE_COMPRESS_BBCONFIG=y
-CONFIG_BEEP=y
-CONFIG_FEATURE_BEEP_FREQ=4000
-CONFIG_FEATURE_BEEP_LENGTH_MS=30
-CONFIG_CHAT=y
-CONFIG_FEATURE_CHAT_NOFAIL=y
-# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
-CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
-# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
-# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
-# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
-# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_FEATURE_CROND_D=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-CONFIG_FEATURE_DC_LIBM=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-CONFIG_DEVMEM=y
-CONFIG_EJECT=y
-CONFIG_FEATURE_EJECT_SCSI=y
-CONFIG_FBSPLASH=y
-# CONFIG_FLASHCP is not set
-CONFIG_FLASH_LOCK=y
-CONFIG_FLASH_UNLOCK=y
-CONFIG_FLASH_ERASEALL=y
-CONFIG_IONICE=y
-CONFIG_INOTIFYD=y
-CONFIG_LAST=y
-CONFIG_FEATURE_LAST_SMALL=y
-# CONFIG_FEATURE_LAST_FANCY is not set
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_FEATURE_LESS_WINCH=y
-CONFIG_FEATURE_LESS_DASHCMD=y
-CONFIG_FEATURE_LESS_LINENUMS=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-# CONFIG_MAN is not set
-# CONFIG_MICROCOM is not set
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-CONFIG_RAIDAUTORUN=y
-CONFIG_READAHEAD=y
-# CONFIG_RFKILL is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_SETSID=y
-CONFIG_STRINGS=y
-CONFIG_TASKSET=y
-CONFIG_FEATURE_TASKSET_FANCY=y
-CONFIG_TIME=y
-CONFIG_TIMEOUT=y
-CONFIG_TTYSIZE=y
-CONFIG_VOLNAME=y
-# CONFIG_WALL is not set
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_NBDCLIENT=y
-CONFIG_NC=y
-CONFIG_NC_SERVER=y
-CONFIG_NC_EXTRA=y
-# CONFIG_NC_110_COMPAT is not set
-CONFIG_FEATURE_IPV6=y
-CONFIG_FEATURE_UNIX_LOCAL=y
-CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_BRCTL=y
-# CONFIG_FEATURE_BRCTL_FANCY is not set
-# CONFIG_FEATURE_BRCTL_SHOW is not set
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-CONFIG_FAKEIDENTD=y
-CONFIG_FTPD=y
-CONFIG_FEATURE_FTP_WRITE=y
-CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-# CONFIG_FEATURE_HTTPD_RANGES is not set
-# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
-# CONFIG_FEATURE_HTTPD_SETUID is not set
-# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
-# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
-# CONFIG_FEATURE_HTTPD_CGI is not set
-# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
-# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
-# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
-# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
-# CONFIG_FEATURE_HTTPD_PROXY is not set
-# CONFIG_FEATURE_HTTPD_GZIP is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-CONFIG_FEATURE_IFCONFIG_SLIP=y
-CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
-CONFIG_FEATURE_IFCONFIG_HW=y
-CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
-CONFIG_IFENSLAVE=y
-CONFIG_IFPLUGD=y
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-CONFIG_FEATURE_IFUPDOWN_IP=y
-CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
-# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-CONFIG_FEATURE_IFUPDOWN_MAPPING=y
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-# CONFIG_INETD is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
-# CONFIG_FEATURE_INETD_RPC is not set
-CONFIG_IP=y
-CONFIG_FEATURE_IP_ADDRESS=y
-CONFIG_FEATURE_IP_LINK=y
-CONFIG_FEATURE_IP_ROUTE=y
-CONFIG_FEATURE_IP_TUNNEL=y
-CONFIG_FEATURE_IP_RULE=y
-CONFIG_FEATURE_IP_SHORT_FORMS=y
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-CONFIG_IPADDR=y
-CONFIG_IPLINK=y
-CONFIG_IPROUTE=y
-CONFIG_IPTUNNEL=y
-CONFIG_IPRULE=y
-CONFIG_IPCALC=y
-CONFIG_FEATURE_IPCALC_FANCY=y
-CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
-CONFIG_NAMEIF=y
-# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
-CONFIG_NETSTAT=y
-# CONFIG_FEATURE_NETSTAT_WIDE is not set
-CONFIG_FEATURE_NETSTAT_PRG=y
-CONFIG_NSLOOKUP=y
-# CONFIG_NTPD is not set
-# CONFIG_FEATURE_NTPD_SERVER is not set
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_PSCAN=y
-CONFIG_ROUTE=y
-CONFIG_SLATTACH=y
-CONFIG_TCPSVD=y
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
-CONFIG_TFTP=y
-# CONFIG_TFTPD is not set
-
-#
-# Common options for tftp/tftpd
-#
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
-CONFIG_TFTP_DEBUG=y
-CONFIG_TRACEROUTE=y
-CONFIG_TRACEROUTE6=y
-# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_TUNCTL=y
-CONFIG_FEATURE_TUNCTL_UG=y
-# CONFIG_UDHCPD is not set
-# CONFIG_DHCPRELAY is not set
-# CONFIG_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_DHCPD_LEASES_FILE=""
-# CONFIG_UDHCPC is not set
-# CONFIG_FEATURE_UDHCPC_ARPING is not set
-# CONFIG_FEATURE_UDHCP_PORT is not set
-CONFIG_UDHCP_DEBUG=0
-# CONFIG_FEATURE_UDHCP_RFC3397 is not set
-CONFIG_UDHCPC_DEFAULT_SCRIPT=""
-CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
-CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
-CONFIG_UDPSVD=y
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-CONFIG_FEATURE_WGET_LONG_OPTIONS=y
-CONFIG_FEATURE_WGET_TIMEOUT=y
-CONFIG_ZCIP=y
-
-#
-# Print Utilities
-#
-# CONFIG_LPD is not set
-CONFIG_LPR=y
-# CONFIG_LPQ is not set
-
-#
-# Mail Utilities
-#
-CONFIG_MAKEMIME=y
-CONFIG_FEATURE_MIME_CHARSET="us-ascii"
-CONFIG_POPMAILDIR=y
-CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
-CONFIG_REFORMIME=y
-CONFIG_FEATURE_REFORMIME_COMPAT=y
-# CONFIG_SENDMAIL is not set
-
-#
-# Process Utilities
-#
-CONFIG_IOSTAT=y
-CONFIG_MPSTAT=y
-CONFIG_PMAP=y
-CONFIG_POWERTOP=y
-# CONFIG_SMEMCAP is not set
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_FEATURE_PS_TIME=y
-CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
-# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_SMP_CPU=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOP_SMP_PROCESS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_FEATURE_SHOW_THREADS=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Runit Utilities
-#
-CONFIG_RUNSV=y
-CONFIG_RUNSVDIR=y
-CONFIG_FEATURE_RUNSVDIR_LOG=y
-CONFIG_SV=y
-CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
-CONFIG_SVLOGD=y
-CONFIG_CHPST=y
-CONFIG_SETUIDGID=y
-CONFIG_ENVUIDGID=y
-CONFIG_ENVDIR=y
-CONFIG_SOFTLIMIT=y
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-# CONFIG_SESTATUS is not set
-
-#
-# Shells
-#
-CONFIG_ASH=y
-CONFIG_ASH_BASH_COMPAT=y
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_PRINTF=y
-CONFIG_ASH_BUILTIN_TEST=y
-CONFIG_ASH_CMDCMD=y
-CONFIG_ASH_MAIL=y
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_ASH_EXPAND_PRMT=y
-CONFIG_CTTYHACK=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_BASH_COMPAT is not set
-# CONFIG_HUSH_BRACE_EXPANSION is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_SAVEHISTORY is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_HUSH_CASE is not set
-# CONFIG_HUSH_FUNCTIONS is not set
-# CONFIG_HUSH_LOCAL is not set
-# CONFIG_HUSH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH_EXPORT_N is not set
-# CONFIG_HUSH_MODE_X is not set
-# CONFIG_MSH is not set
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-# CONFIG_FEATURE_BASH_IS_ASH is not set
-# CONFIG_FEATURE_BASH_IS_HUSH is not set
-CONFIG_FEATURE_BASH_IS_NONE=y
-CONFIG_SH_MATH_SUPPORT=y
-CONFIG_SH_MATH_SUPPORT_64=y
-CONFIG_FEATURE_SH_EXTRA_QUIET=y
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_FEATURE_SH_NOFORK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-CONFIG_FEATURE_REMOTE_LOG=y
-# CONFIG_FEATURE_SYSLOGD_DUP is not set
-CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
-CONFIG_FEATURE_IPC_SYSLOG=y
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
-CONFIG_LOGREAD=y
-CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
-CONFIG_KLOGD=y
-CONFIG_FEATURE_KLOGD_KLOGCTL=y
-CONFIG_LOGGER=y
+busybox-dot-config.1.20.x
\ No newline at end of file
diff --git a/source/a/mkinitrd/busybox-dot-config.1.18.x b/source/a/mkinitrd/busybox-dot-config.1.18.x
new file mode 100644
index 00000000..35b32a4f
--- /dev/null
+++ b/source/a/mkinitrd/busybox-dot-config.1.18.x
@@ -0,0 +1,990 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.18.4
+# Fri Mar 25 23:08:06 2011
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_USE_PORTABLE_CODE is not set
+CONFIG_PLATFORM_LINUX=y
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_INSTALL_NO_USR=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_UNICODE_SUPPORT=y
+# CONFIG_UNICODE_USING_LOCALE is not set
+# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
+CONFIG_SUBST_WCHAR=63
+CONFIG_LAST_SUPPORTED_WCHAR=767
+# CONFIG_UNICODE_COMBINING_WCHARS is not set
+# CONFIG_UNICODE_WIDE_WCHARS is not set
+# CONFIG_UNICODE_BIDI_SUPPORT is not set
+# CONFIG_UNICODE_NEUTRAL_TABLE is not set
+# CONFIG_UNICODE_PRESERVE_BROKEN is not set
+CONFIG_LONG_OPTS=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_WTMP=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+CONFIG_EXTRA_CFLAGS=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+
+#
+# Installation Options ("make install" behavior)
+#
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/tmp/package-mkinitrd/usr/share/mkinitrd/initrd-tree"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
+# CONFIG_FEATURE_NON_POSIX_CP is not set
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_FEATURE_SEAMLESS_XZ=y
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+# CONFIG_FEATURE_AR_CREATE is not set
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+CONFIG_FEATURE_CPIO_P=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
+CONFIG_LZOP=y
+CONFIG_LZOP_COMPR_HIGH=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+# CONFIG_FEATURE_TAR_TO_COMMAND is not set
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
+# CONFIG_FEATURE_TAR_SELINUX is not set
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_LZMA=y
+CONFIG_UNXZ=y
+CONFIG_XZ=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+# CONFIG_FEATURE_DATE_NANO is not set
+# CONFIG_FEATURE_DATE_COMPAT is not set
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_BASE64=y
+CONFIG_CAL=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_FEATURE_CP_LONG_OPTIONS=y
+CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_FANCY=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_FSYNC=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SHA256SUM=y
+CONFIG_SHA512SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TOUCH=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum, sha256sum, sha512sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_FGCONSOLE=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
+CONFIG_DEFAULT_SETFONT_DIR="/usr/share/kbd/consolefonts"
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Common options for loadfont and setfont
+#
+# CONFIG_FEATURE_LOADFONT_PSF2 is not set
+CONFIG_FEATURE_LOADFONT_RAW=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_PATCH=y
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_LIBM=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_ED=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_ASK_TERMINAL=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_FEATURE_FIND_LINKS=y
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+# CONFIG_BOOTCHARTD is not set
+# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
+# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
+CONFIG_HALT=y
+# CONFIG_FEATURE_CALL_TELINIT is not set
+CONFIG_TELINIT_PATH=""
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_INIT_TERMINAL_TYPE="linux"
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_ADD_SHELL=y
+CONFIG_REMOVE_SHELL=y
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_USE_BB_CRYPT_SHA=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_FIRST_SYSTEM_ID=1000
+CONFIG_LAST_SYSTEM_ID=12000
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELUSER=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_GETTY=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+CONFIG_TUNE2FS=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_MODINFO=y
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_INSMOD=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+CONFIG_DEPMOD=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_2_4_MODULES=y
+# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_MODUTILS_ALIAS=y
+CONFIG_FEATURE_MODUTILS_SYMBOLS=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+
+#
+# Linux System Utilities
+#
+CONFIG_BLOCKDEV=y
+CONFIG_REV=y
+CONFIG_ACPID=y
+CONFIG_FEATURE_ACPID_COMPAT=y
+CONFIG_BLKID=y
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_GPT_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FINDFS=y
+# CONFIG_FLOCK is not set
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+# CONFIG_MKFS_EXT2 is not set
+CONFIG_MKFS_MINIX=y
+CONFIG_FEATURE_MINIX2=y
+# CONFIG_MKFS_REISER is not set
+CONFIG_MKFS_VFAT=y
+CONFIG_GETOPT=y
+CONFIG_FEATURE_GETOPT_LONG=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_LSPCI=y
+CONFIG_LSUSB=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_UUID=y
+CONFIG_MORE=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SCRIPTREPLAY=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+CONFIG_VOLUMEID=y
+
+#
+# Filesystem/Volume identification
+#
+CONFIG_FEATURE_VOLUMEID_EXT=y
+# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_CONSPY is not set
+# CONFIG_NANDWRITE is not set
+# CONFIG_NANDDUMP is not set
+# CONFIG_UBIATTACH is not set
+# CONFIG_UBIDETACH is not set
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_FEATURE_COMPRESS_BBCONFIG=y
+CONFIG_BEEP=y
+CONFIG_FEATURE_BEEP_FREQ=4000
+CONFIG_FEATURE_BEEP_LENGTH_MS=30
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_FEATURE_CROND_D=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+CONFIG_FEATURE_DC_LIBM=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_DEVMEM=y
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+# CONFIG_FLASHCP is not set
+CONFIG_FLASH_LOCK=y
+CONFIG_FLASH_UNLOCK=y
+CONFIG_FLASH_ERASEALL=y
+CONFIG_IONICE=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_FEATURE_LESS_WINCH=y
+CONFIG_FEATURE_LESS_DASHCMD=y
+CONFIG_FEATURE_LESS_LINENUMS=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+# CONFIG_RFKILL is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TIMEOUT=y
+CONFIG_TTYSIZE=y
+CONFIG_VOLNAME=y
+# CONFIG_WALL is not set
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_NBDCLIENT=y
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+# CONFIG_NC_110_COMPAT is not set
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_UNIX_LOCAL=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPD=y
+CONFIG_FEATURE_FTP_WRITE=y
+CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+# CONFIG_FEATURE_HTTPD_GZIP is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFPLUGD=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+# CONFIG_NTPD is not set
+# CONFIG_FEATURE_NTPD_SERVER is not set
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+CONFIG_SLATTACH=y
+CONFIG_TCPSVD=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+
+#
+# Common options for tftp/tftpd
+#
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+CONFIG_TFTP_DEBUG=y
+CONFIG_TRACEROUTE=y
+CONFIG_TRACEROUTE6=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_TUNCTL=y
+CONFIG_FEATURE_TUNCTL_UG=y
+# CONFIG_UDHCPD is not set
+# CONFIG_DHCPRELAY is not set
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+CONFIG_UDHCP_DEBUG=0
+# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+CONFIG_UDHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
+CONFIG_UDPSVD=y
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_FEATURE_WGET_TIMEOUT=y
+CONFIG_ZCIP=y
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
+
+#
+# Mail Utilities
+#
+CONFIG_MAKEMIME=y
+CONFIG_FEATURE_MIME_CHARSET="us-ascii"
+CONFIG_POPMAILDIR=y
+CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
+CONFIG_REFORMIME=y
+CONFIG_FEATURE_REFORMIME_COMPAT=y
+# CONFIG_SENDMAIL is not set
+
+#
+# Process Utilities
+#
+CONFIG_IOSTAT=y
+CONFIG_MPSTAT=y
+CONFIG_PMAP=y
+CONFIG_POWERTOP=y
+# CONFIG_SMEMCAP is not set
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_SMP_CPU=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOP_SMP_PROCESS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_FEATURE_SHOW_THREADS=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_FEATURE_RUNSVDIR_LOG=y
+CONFIG_SV=y
+CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Shells
+#
+CONFIG_ASH=y
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+CONFIG_CTTYHACK=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_BASH_COMPAT is not set
+# CONFIG_HUSH_BRACE_EXPANSION is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_SAVEHISTORY is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_HUSH_FUNCTIONS is not set
+# CONFIG_HUSH_LOCAL is not set
+# CONFIG_HUSH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH_EXPORT_N is not set
+# CONFIG_HUSH_MODE_X is not set
+# CONFIG_MSH is not set
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+# CONFIG_FEATURE_BASH_IS_ASH is not set
+# CONFIG_FEATURE_BASH_IS_HUSH is not set
+CONFIG_FEATURE_BASH_IS_NONE=y
+CONFIG_SH_MATH_SUPPORT=y
+CONFIG_SH_MATH_SUPPORT_64=y
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_FEATURE_KLOGD_KLOGCTL=y
+CONFIG_LOGGER=y
diff --git a/source/a/mkinitrd/busybox-dot-config.1.19.x b/source/a/mkinitrd/busybox-dot-config.1.19.x
new file mode 100644
index 00000000..864fed9d
--- /dev/null
+++ b/source/a/mkinitrd/busybox-dot-config.1.19.x
@@ -0,0 +1,1013 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.19.3
+# Sat Dec 10 20:40:02 2011
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_USE_PORTABLE_CODE is not set
+CONFIG_PLATFORM_LINUX=y
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_INSTALL_NO_USR=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_UNICODE_SUPPORT=y
+# CONFIG_UNICODE_USING_LOCALE is not set
+# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
+CONFIG_SUBST_WCHAR=63
+CONFIG_LAST_SUPPORTED_WCHAR=767
+# CONFIG_UNICODE_COMBINING_WCHARS is not set
+# CONFIG_UNICODE_WIDE_WCHARS is not set
+# CONFIG_UNICODE_BIDI_SUPPORT is not set
+# CONFIG_UNICODE_NEUTRAL_TABLE is not set
+# CONFIG_UNICODE_PRESERVE_BROKEN is not set
+CONFIG_LONG_OPTS=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+CONFIG_EXTRA_CFLAGS=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+
+#
+# Installation Options ("make install" behavior)
+#
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/tmp/package-mkinitrd/usr/share/mkinitrd/initrd-tree"
+
+#
+# Busybox Library Tuning
+#
+# CONFIG_FEATURE_SYSTEMD is not set
+CONFIG_FEATURE_RTMINMAX=y
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+# CONFIG_FEATURE_REVERSE_SEARCH is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
+# CONFIG_FEATURE_NON_POSIX_CP is not set
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+# CONFIG_FEATURE_SKIP_ROOTFS is not set
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_FEATURE_SEAMLESS_XZ=y
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+# CONFIG_FEATURE_AR_CREATE is not set
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+CONFIG_FEATURE_CPIO_P=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
+CONFIG_LZOP=y
+CONFIG_LZOP_COMPR_HIGH=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+# CONFIG_FEATURE_TAR_TO_COMMAND is not set
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
+# CONFIG_FEATURE_TAR_SELINUX is not set
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_LZMA=y
+CONFIG_UNXZ=y
+CONFIG_XZ=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+# CONFIG_FEATURE_DATE_NANO is not set
+# CONFIG_FEATURE_DATE_COMPAT is not set
+CONFIG_ID=y
+# CONFIG_GROUPS is not set
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_BASE64=y
+CONFIG_WHO=y
+CONFIG_USERS=y
+CONFIG_CAL=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_FEATURE_CP_LONG_OPTIONS=y
+CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_FANCY=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_FSYNC=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SHA256SUM=y
+CONFIG_SHA512SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum, sha256sum, sha512sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_FGCONSOLE=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
+CONFIG_DEFAULT_SETFONT_DIR="/usr/share/kbd/consolefonts"
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Common options for loadfont and setfont
+#
+# CONFIG_FEATURE_LOADFONT_PSF2 is not set
+CONFIG_FEATURE_LOADFONT_RAW=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_PATCH=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+# CONFIG_FEATURE_VI_REGEX_SEARCH is not set
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_ASK_TERMINAL=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_LIBM=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_ED=y
+CONFIG_SED=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_FEATURE_FIND_LINKS=y
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+# CONFIG_BOOTCHARTD is not set
+# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
+# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
+CONFIG_HALT=y
+# CONFIG_FEATURE_CALL_TELINIT is not set
+CONFIG_TELINIT_PATH=""
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_INIT_TERMINAL_TYPE="linux"
+CONFIG_MESG=y
+CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_ADD_SHELL=y
+CONFIG_REMOVE_SHELL=y
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_USE_BB_CRYPT_SHA=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_FIRST_SYSTEM_ID=1000
+CONFIG_LAST_SYSTEM_ID=12000
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELUSER=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_GETTY=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+CONFIG_TUNE2FS=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_MODINFO=y
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_INSMOD=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+CONFIG_DEPMOD=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_2_4_MODULES=y
+# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_MODUTILS_ALIAS=y
+CONFIG_FEATURE_MODUTILS_SYMBOLS=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+
+#
+# Linux System Utilities
+#
+CONFIG_BLOCKDEV=y
+CONFIG_REV=y
+CONFIG_ACPID=y
+CONFIG_FEATURE_ACPID_COMPAT=y
+CONFIG_BLKID=y
+CONFIG_FEATURE_BLKID_TYPE=y
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_GPT_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FINDFS=y
+# CONFIG_FLOCK is not set
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+# CONFIG_MKFS_EXT2 is not set
+CONFIG_MKFS_MINIX=y
+CONFIG_FEATURE_MINIX2=y
+# CONFIG_MKFS_REISER is not set
+CONFIG_MKFS_VFAT=y
+CONFIG_GETOPT=y
+CONFIG_FEATURE_GETOPT_LONG=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_LSPCI=y
+CONFIG_LSUSB=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_UUID=y
+CONFIG_MORE=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SCRIPTREPLAY=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+CONFIG_VOLUMEID=y
+
+#
+# Filesystem/Volume identification
+#
+CONFIG_FEATURE_VOLUMEID_EXT=y
+# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_CONSPY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_FEATURE_LESS_WINCH=y
+CONFIG_FEATURE_LESS_ASK_TERMINAL=y
+CONFIG_FEATURE_LESS_DASHCMD=y
+CONFIG_FEATURE_LESS_LINENUMS=y
+# CONFIG_NANDWRITE is not set
+# CONFIG_NANDDUMP is not set
+CONFIG_SETSERIAL=y
+# CONFIG_UBIATTACH is not set
+# CONFIG_UBIDETACH is not set
+# CONFIG_UBIMKVOL is not set
+# CONFIG_UBIRMVOL is not set
+# CONFIG_UBIRSVOL is not set
+# CONFIG_UBIUPDATEVOL is not set
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_FEATURE_COMPRESS_BBCONFIG=y
+CONFIG_BEEP=y
+CONFIG_FEATURE_BEEP_FREQ=4000
+CONFIG_FEATURE_BEEP_LENGTH_MS=30
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_FEATURE_CROND_D=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+CONFIG_FEATURE_DC_LIBM=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_DEVMEM=y
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+# CONFIG_FLASHCP is not set
+CONFIG_FLASH_LOCK=y
+CONFIG_FLASH_UNLOCK=y
+CONFIG_FLASH_ERASEALL=y
+CONFIG_IONICE=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+# CONFIG_RFKILL is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TIMEOUT=y
+CONFIG_TTYSIZE=y
+CONFIG_VOLNAME=y
+# CONFIG_WALL is not set
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NBDCLIENT=y
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+# CONFIG_NC_110_COMPAT is not set
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+# CONFIG_WHOIS is not set
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_UNIX_LOCAL=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPD=y
+CONFIG_FEATURE_FTP_WRITE=y
+CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+# CONFIG_FEATURE_HTTPD_GZIP is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFPLUGD=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+# CONFIG_NTPD is not set
+# CONFIG_FEATURE_NTPD_SERVER is not set
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+CONFIG_SLATTACH=y
+CONFIG_TCPSVD=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+
+#
+# Common options for tftp/tftpd
+#
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+CONFIG_TFTP_DEBUG=y
+CONFIG_TRACEROUTE=y
+CONFIG_TRACEROUTE6=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_TUNCTL=y
+CONFIG_FEATURE_TUNCTL_UG=y
+# CONFIG_UDHCPD is not set
+# CONFIG_DHCPRELAY is not set
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+CONFIG_UDHCP_DEBUG=0
+# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+# CONFIG_FEATURE_UDHCP_8021Q is not set
+CONFIG_UDHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
+CONFIG_UDPSVD=y
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_FEATURE_WGET_TIMEOUT=y
+CONFIG_ZCIP=y
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
+
+#
+# Mail Utilities
+#
+CONFIG_MAKEMIME=y
+CONFIG_FEATURE_MIME_CHARSET="us-ascii"
+CONFIG_POPMAILDIR=y
+CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
+CONFIG_REFORMIME=y
+CONFIG_FEATURE_REFORMIME_COMPAT=y
+# CONFIG_SENDMAIL is not set
+
+#
+# Process Utilities
+#
+CONFIG_IOSTAT=y
+CONFIG_MPSTAT=y
+CONFIG_NMETER=y
+CONFIG_PMAP=y
+CONFIG_POWERTOP=y
+# CONFIG_PSTREE is not set
+# CONFIG_PWDX is not set
+# CONFIG_SMEMCAP is not set
+CONFIG_UPTIME=y
+# CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_SMP_CPU=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOP_SMP_PROCESS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_FEATURE_SHOW_THREADS=y
+CONFIG_WATCH=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_FEATURE_RUNSVDIR_LOG=y
+CONFIG_SV=y
+CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Shells
+#
+CONFIG_ASH=y
+CONFIG_ASH_BASH_COMPAT=y
+# CONFIG_ASH_IDLE_TIMEOUT is not set
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+CONFIG_CTTYHACK=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_BASH_COMPAT is not set
+# CONFIG_HUSH_BRACE_EXPANSION is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_SAVEHISTORY is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_HUSH_FUNCTIONS is not set
+# CONFIG_HUSH_LOCAL is not set
+# CONFIG_HUSH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH_EXPORT_N is not set
+# CONFIG_HUSH_MODE_X is not set
+# CONFIG_MSH is not set
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+# CONFIG_FEATURE_BASH_IS_ASH is not set
+# CONFIG_FEATURE_BASH_IS_HUSH is not set
+CONFIG_FEATURE_BASH_IS_NONE=y
+CONFIG_SH_MATH_SUPPORT=y
+CONFIG_SH_MATH_SUPPORT_64=y
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_FEATURE_SH_HISTFILESIZE=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+# CONFIG_FEATURE_SYSLOGD_CFG is not set
+CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_FEATURE_KLOGD_KLOGCTL=y
+CONFIG_LOGGER=y
diff --git a/source/a/mkinitrd/busybox-dot-config.1.20.x b/source/a/mkinitrd/busybox-dot-config.1.20.x
new file mode 100644
index 00000000..3184ac28
--- /dev/null
+++ b/source/a/mkinitrd/busybox-dot-config.1.20.x
@@ -0,0 +1,1024 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.20.1
+# Tue Jun 12 09:42:03 2012
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_USE_PORTABLE_CODE is not set
+CONFIG_PLATFORM_LINUX=y
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_INSTALL_NO_USR=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_UNICODE_SUPPORT=y
+# CONFIG_UNICODE_USING_LOCALE is not set
+# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
+CONFIG_SUBST_WCHAR=63
+CONFIG_LAST_SUPPORTED_WCHAR=767
+# CONFIG_UNICODE_COMBINING_WCHARS is not set
+# CONFIG_UNICODE_WIDE_WCHARS is not set
+# CONFIG_UNICODE_BIDI_SUPPORT is not set
+# CONFIG_UNICODE_NEUTRAL_TABLE is not set
+# CONFIG_UNICODE_PRESERVE_BROKEN is not set
+CONFIG_LONG_OPTS=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+CONFIG_SYSROOT=""
+CONFIG_EXTRA_CFLAGS=""
+CONFIG_EXTRA_LDFLAGS=""
+CONFIG_EXTRA_LDLIBS=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+
+#
+# Installation Options ("make install" behavior)
+#
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/tmp/package-mkinitrd/usr/share/mkinitrd/initrd-tree"
+
+#
+# Busybox Library Tuning
+#
+# CONFIG_FEATURE_SYSTEMD is not set
+CONFIG_FEATURE_RTMINMAX=y
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SMALL=1
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+# CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is not set
+# CONFIG_FEATURE_REVERSE_SEARCH is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
+# CONFIG_FEATURE_NON_POSIX_CP is not set
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+# CONFIG_FEATURE_SKIP_ROOTFS is not set
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_FEATURE_SEAMLESS_XZ=y
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+# CONFIG_FEATURE_AR_CREATE is not set
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+CONFIG_FEATURE_CPIO_P=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
+CONFIG_GZIP_FAST=0
+CONFIG_LZOP=y
+CONFIG_LZOP_COMPR_HIGH=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+# CONFIG_FEATURE_TAR_TO_COMMAND is not set
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
+# CONFIG_FEATURE_TAR_SELINUX is not set
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_LZMA=y
+CONFIG_UNXZ=y
+CONFIG_XZ=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+# CONFIG_FEATURE_DATE_NANO is not set
+# CONFIG_FEATURE_DATE_COMPAT is not set
+CONFIG_HOSTID=y
+CONFIG_ID=y
+# CONFIG_GROUPS is not set
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_FEATURE_TOUCH_SUSV3=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_BASE64=y
+CONFIG_WHO=y
+CONFIG_USERS=y
+CONFIG_CAL=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_FEATURE_CP_LONG_OPTIONS=y
+CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_FANCY=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_FSYNC=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SHA256SUM=y
+CONFIG_SHA512SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum, sha256sum, sha512sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_FGCONSOLE=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
+CONFIG_DEFAULT_SETFONT_DIR="/usr/share/kbd/consolefonts"
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Common options for loadfont and setfont
+#
+# CONFIG_FEATURE_LOADFONT_PSF2 is not set
+CONFIG_FEATURE_LOADFONT_RAW=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_PATCH=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+# CONFIG_FEATURE_VI_REGEX_SEARCH is not set
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_ASK_TERMINAL=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_LIBM=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_ED=y
+CONFIG_SED=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_FEATURE_FIND_LINKS=y
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+# CONFIG_BOOTCHARTD is not set
+# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
+# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
+CONFIG_HALT=y
+# CONFIG_FEATURE_CALL_TELINIT is not set
+CONFIG_TELINIT_PATH=""
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_INIT_TERMINAL_TYPE="linux"
+CONFIG_MESG=y
+CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_ADD_SHELL=y
+CONFIG_REMOVE_SHELL=y
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_USE_BB_CRYPT_SHA=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_FIRST_SYSTEM_ID=1000
+CONFIG_LAST_SYSTEM_ID=12000
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELUSER=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_GETTY=y
+CONFIG_LOGIN=y
+# CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="s"
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+CONFIG_TUNE2FS=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_MODINFO=y
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_INSMOD=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+CONFIG_DEPMOD=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_2_4_MODULES=y
+# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_MODUTILS_ALIAS=y
+CONFIG_FEATURE_MODUTILS_SYMBOLS=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+
+#
+# Linux System Utilities
+#
+CONFIG_BLOCKDEV=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_REV=y
+CONFIG_ACPID=y
+CONFIG_FEATURE_ACPID_COMPAT=y
+CONFIG_BLKID=y
+CONFIG_FEATURE_BLKID_TYPE=y
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_GPT_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FINDFS=y
+# CONFIG_FLOCK is not set
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+# CONFIG_MKFS_EXT2 is not set
+CONFIG_MKFS_MINIX=y
+CONFIG_FEATURE_MINIX2=y
+# CONFIG_MKFS_REISER is not set
+CONFIG_MKFS_VFAT=y
+CONFIG_GETOPT=y
+CONFIG_FEATURE_GETOPT_LONG=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_LSPCI=y
+CONFIG_LSUSB=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_UUID=y
+CONFIG_MORE=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SCRIPTREPLAY=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+CONFIG_VOLUMEID=y
+
+#
+# Filesystem/Volume identification
+#
+CONFIG_FEATURE_VOLUMEID_EXT=y
+# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_CONSPY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_FEATURE_LESS_WINCH=y
+CONFIG_FEATURE_LESS_ASK_TERMINAL=y
+CONFIG_FEATURE_LESS_DASHCMD=y
+CONFIG_FEATURE_LESS_LINENUMS=y
+# CONFIG_NANDWRITE is not set
+# CONFIG_NANDDUMP is not set
+CONFIG_SETSERIAL=y
+# CONFIG_UBIATTACH is not set
+# CONFIG_UBIDETACH is not set
+# CONFIG_UBIMKVOL is not set
+# CONFIG_UBIRMVOL is not set
+# CONFIG_UBIRSVOL is not set
+# CONFIG_UBIUPDATEVOL is not set
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_FEATURE_COMPRESS_BBCONFIG=y
+CONFIG_BEEP=y
+CONFIG_FEATURE_BEEP_FREQ=4000
+CONFIG_FEATURE_BEEP_LENGTH_MS=30
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_FEATURE_CROND_D=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+CONFIG_FEATURE_DC_LIBM=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_DEVMEM=y
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+# CONFIG_FLASHCP is not set
+CONFIG_FLASH_LOCK=y
+CONFIG_FLASH_UNLOCK=y
+CONFIG_FLASH_ERASEALL=y
+CONFIG_IONICE=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+# CONFIG_RFKILL is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TIMEOUT=y
+CONFIG_TTYSIZE=y
+CONFIG_VOLNAME=y
+# CONFIG_WALL is not set
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NBDCLIENT=y
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+# CONFIG_NC_110_COMPAT is not set
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+# CONFIG_WHOIS is not set
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_UNIX_LOCAL=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPD=y
+CONFIG_FEATURE_FTP_WRITE=y
+CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+# CONFIG_FEATURE_HTTPD_GZIP is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFPLUGD=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+# CONFIG_NTPD is not set
+# CONFIG_FEATURE_NTPD_SERVER is not set
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+CONFIG_SLATTACH=y
+CONFIG_TCPSVD=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+
+#
+# Common options for tftp/tftpd
+#
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+CONFIG_TFTP_DEBUG=y
+CONFIG_TRACEROUTE=y
+CONFIG_TRACEROUTE6=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_TUNCTL=y
+CONFIG_FEATURE_TUNCTL_UG=y
+CONFIG_UDHCPC6=y
+# CONFIG_UDHCPD is not set
+# CONFIG_DHCPRELAY is not set
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+CONFIG_UDHCP_DEBUG=0
+# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+# CONFIG_FEATURE_UDHCP_8021Q is not set
+CONFIG_UDHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
+CONFIG_UDPSVD=y
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_FEATURE_WGET_TIMEOUT=y
+CONFIG_ZCIP=y
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
+
+#
+# Mail Utilities
+#
+CONFIG_MAKEMIME=y
+CONFIG_FEATURE_MIME_CHARSET="us-ascii"
+CONFIG_POPMAILDIR=y
+CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
+CONFIG_REFORMIME=y
+CONFIG_FEATURE_REFORMIME_COMPAT=y
+# CONFIG_SENDMAIL is not set
+
+#
+# Process Utilities
+#
+CONFIG_IOSTAT=y
+CONFIG_LSOF=y
+CONFIG_MPSTAT=y
+CONFIG_NMETER=y
+CONFIG_PMAP=y
+CONFIG_POWERTOP=y
+# CONFIG_PSTREE is not set
+# CONFIG_PWDX is not set
+# CONFIG_SMEMCAP is not set
+CONFIG_UPTIME=y
+# CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+# CONFIG_FEATURE_PS_WIDE is not set
+# CONFIG_FEATURE_PS_LONG is not set
+CONFIG_FEATURE_PS_TIME=y
+CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_SMP_CPU=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOP_SMP_PROCESS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_FEATURE_SHOW_THREADS=y
+CONFIG_WATCH=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_FEATURE_RUNSVDIR_LOG=y
+CONFIG_SV=y
+CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Shells
+#
+CONFIG_ASH=y
+CONFIG_ASH_BASH_COMPAT=y
+# CONFIG_ASH_IDLE_TIMEOUT is not set
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+CONFIG_CTTYHACK=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_BASH_COMPAT is not set
+# CONFIG_HUSH_BRACE_EXPANSION is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_SAVEHISTORY is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_HUSH_FUNCTIONS is not set
+# CONFIG_HUSH_LOCAL is not set
+# CONFIG_HUSH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH_EXPORT_N is not set
+# CONFIG_HUSH_MODE_X is not set
+# CONFIG_MSH is not set
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+# CONFIG_FEATURE_BASH_IS_ASH is not set
+# CONFIG_FEATURE_BASH_IS_HUSH is not set
+CONFIG_FEATURE_BASH_IS_NONE=y
+CONFIG_SH_MATH_SUPPORT=y
+CONFIG_SH_MATH_SUPPORT_64=y
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_FEATURE_SH_HISTFILESIZE=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+# CONFIG_FEATURE_SYSLOGD_CFG is not set
+CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_FEATURE_KLOGD_KLOGCTL=y
+CONFIG_LOGGER=y
diff --git a/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ash.patch b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ash.patch
new file mode 100644
index 00000000..a012a706
--- /dev/null
+++ b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ash.patch
@@ -0,0 +1,12 @@
+--- busybox-1.20.1/shell/ash.c
++++ busybox-1.20.1-ash/shell/ash.c
+@@ -6846,8 +6846,7 @@ evalvar(char *p, int flags, struct strli
+ 		patloc = expdest - (char *)stackblock();
+ 		if (NULL == subevalvar(p, /* varname: */ NULL, patloc, subtype,
+ 				startloc, varflags,
+-//TODO: | EXP_REDIR too? All other such places do it too
+-				/* quotes: */ flags & (EXP_FULL | EXP_CASE),
++				/* quotes: */ flags & (EXP_FULL | EXP_CASE | EXP_REDIR),
+ 				var_str_list)
+ 		) {
+ 			int amount = expdest - (
diff --git a/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ifupdown.patch b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ifupdown.patch
new file mode 100644
index 00000000..b2a94561
--- /dev/null
+++ b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-ifupdown.patch
@@ -0,0 +1,75 @@
+--- busybox-1.20.1/networking/ifupdown.c
++++ busybox-1.20.1-ifupdown/networking/ifupdown.c
+@@ -140,8 +140,6 @@ static const char keywords_up_down[] ALI
+ 	"up\0"
+ 	"down\0"
+ 	"pre-up\0"
+-	"pre-down\0"
+-	"post-up\0"
+ 	"post-down\0"
+ ;
+ 
+@@ -895,6 +893,11 @@ static struct interfaces_file_t *read_in
+ 				if (rest_of_line[0] == '\0')
+ 					bb_error_msg_and_die("option with empty value \"%s\"", buf);
+ 
++				if (strcmp(first_word, "post-up") == 0)
++					first_word += 5; /* "up" */
++				else if (strcmp(first_word, "pre-down") == 0)
++					first_word += 4; /* "down" */
++
+ 				/* If not one of "up", "down",... words... */
+ 				if (index_in_strings(keywords_up_down, first_word) < 0) {
+ 					int i;
+@@ -963,7 +966,7 @@ static char *setlocalenv(const char *for
+ 	return result;
+ }
+ 
+-static void set_environ(struct interface_defn_t *iface, const char *mode)
++static void set_environ(struct interface_defn_t *iface, const char *mode, const char *opt)
+ {
+ 	int i;
+ 	char **pp;
+@@ -976,7 +979,7 @@ static void set_environ(struct interface
+ 	}
+ 
+ 	/* note: last element will stay NULL: */
+-	G.my_environ = xzalloc(sizeof(char *) * (iface->n_options + 6));
++	G.my_environ = xzalloc(sizeof(char *) * (iface->n_options + 7));
+ 	pp = G.my_environ;
+ 
+ 	for (i = 0; i < iface->n_options; i++) {
+@@ -990,6 +993,7 @@ static void set_environ(struct interface
+ 	*pp++ = setlocalenv("%s=%s", "ADDRFAM", iface->address_family->name);
+ 	*pp++ = setlocalenv("%s=%s", "METHOD", iface->method->name);
+ 	*pp++ = setlocalenv("%s=%s", "MODE", mode);
++	*pp++ = setlocalenv("%s=%s", "PHASE", opt);
+ 	if (G.startup_PATH)
+ 		*pp++ = setlocalenv("%s=%s", "PATH", G.startup_PATH);
+ }
+@@ -1044,21 +1048,21 @@ static int check(char *str)
+ static int iface_up(struct interface_defn_t *iface)
+ {
+ 	if (!iface->method->up(iface, check)) return -1;
+-	set_environ(iface, "start");
++	set_environ(iface, "start", "pre-up");
+ 	if (!execute_all(iface, "pre-up")) return 0;
+ 	if (!iface->method->up(iface, doit)) return 0;
++	set_environ(iface, "start", "post-up");
+ 	if (!execute_all(iface, "up")) return 0;
+-	if (!execute_all(iface, "post-up")) return 0;
+ 	return 1;
+ }
+ 
+ static int iface_down(struct interface_defn_t *iface)
+ {
+ 	if (!iface->method->down(iface,check)) return -1;
+-	set_environ(iface, "stop");
+-	if (!execute_all(iface, "pre-down")) return 0;
++	set_environ(iface, "stop", "pre-down");
+ 	if (!execute_all(iface, "down")) return 0;
+ 	if (!iface->method->down(iface, doit)) return 0;
++	set_environ(iface, "stop", "post-down");
+ 	if (!execute_all(iface, "post-down")) return 0;
+ 	return 1;
+ }
diff --git a/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-man.patch b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-man.patch
new file mode 100644
index 00000000..f382e078
--- /dev/null
+++ b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-man.patch
@@ -0,0 +1,34 @@
+--- busybox-1.20.1/miscutils/man.c
++++ busybox-1.20.1-man/miscutils/man.c
+@@ -129,27 +129,21 @@ static int show_manpage(const char *page
+ #endif
+ #if ENABLE_FEATURE_SEAMLESS_XZ
+ 	strcpy(ext, "xz");
+-	if (run_pipe(pager, man_filename, man, level))
++	if (run_pipe(pager, filename_with_zext, man, level))
+ 		return 1;
+ #endif
+ #if ENABLE_FEATURE_SEAMLESS_BZ2
+ 	strcpy(ext, "bz2");
+-	if (run_pipe(pager, man_filename, man, level))
++	if (run_pipe(pager, filename_with_zext, man, level))
+ 		return 1;
+ #endif
+ #if ENABLE_FEATURE_SEAMLESS_GZ
+ 	strcpy(ext, "gz");
+-	if (run_pipe(pager, man_filename, man, level))
++	if (run_pipe(pager, filename_with_zext, man, level))
+ 		return 1;
+ #endif
+ 
+-#if SEAMLESS_COMPRESSION
+-	ext[-1] = '\0';
+-#endif
+-	if (run_pipe(pager, man_filename, man, level))
+-		return 1;
+-
+-	return 0;
++	return run_pipe(pager, man_filename, man, level);
+ }
+ 
+ int man_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
diff --git a/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-tar.patch b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-tar.patch
new file mode 100644
index 00000000..4129b651
--- /dev/null
+++ b/source/a/mkinitrd/fixes-1.20.1/busybox-1.20.1-tar.patch
@@ -0,0 +1,11 @@
+--- busybox-1.20.1/archival/libarchive/get_header_tar.c
++++ busybox-1.20.1-tar/archival/libarchive/get_header_tar.c
+@@ -84,7 +84,7 @@ static unsigned long long getOctal(char 
+ 		first >>= 1; /* now 7th bit = 6th bit */
+ 		v = first;   /* sign-extend 8 bits to 64 */
+ 		while (--len != 0)
+-			v = (v << 8) + (unsigned char) *str++;
++			v = (v << 8) + (uint8_t) *++str;
+ 	}
+ 	return v;
+ }
diff --git a/source/a/mkinitrd/init b/source/a/mkinitrd/init
index 2205a592..ae475d89 100755
--- a/source/a/mkinitrd/init
+++ b/source/a/mkinitrd/init
@@ -78,6 +78,7 @@ PATH="/sbin:/bin:/usr/sbin:/usr/bin"
 # Mount /proc and /sys:
 mount -n proc /proc -t proc
 mount -n sysfs /sys -t sysfs
+mount -n tmpfs /run -t tmpfs -o mode=0755
 
 if grep devtmpfs /proc/filesystems 1>/dev/null 2>/dev/null ; then
   DEVTMPFS=1
@@ -123,7 +124,17 @@ for ARG in $(cat /proc/cmdline); do
   esac
 done
 
-# Load kernel modules:
+# If udevd is available, use it to generate block devices
+# else use mdev to read sysfs and generate the needed devices 
+if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then
+  /sbin/udevd --daemon --resolve-names=never
+  /sbin/udevadm trigger --subsystem-match=block --action=add
+  /sbin/udevadm settle --timeout=10
+else
+  [ "$DEVTMPFS" != "1" ] && mdev -s
+fi
+
+# Load kernel modules (ideally this was already done by udev):
 if [ ! -d /lib/modules/$(uname -r) ]; then
   echo "No kernel modules found for Linux $(uname -r)."
 elif [ -x ./load_kernel_modules ]; then # use load_kernel_modules script:
@@ -143,16 +154,6 @@ fi
 # A root filesystem on USB is a good example of that.
 sleep $WAIT
 
-# If udevd is available, use it to generate block devices
-# else use mdev to read sysfs and generate the needed devices 
-if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then
-  /sbin/udevd --daemon --resolve-names=never
-  /sbin/udevadm trigger --subsystem-match=block --action=add
-  /sbin/udevadm settle --timeout=10
-else
-  [ "$DEVTMPFS" != "1" ] && mdev -s
-fi
-
 # Load a custom keyboard mapping:
 if [ -n "$KEYMAP" ]; then
   echo "${INITRD}:  Loading '$KEYMAP' keyboard mapping:"
@@ -222,7 +223,9 @@ if [ "$RESCUE" = "" ]; then
 
   # Initialize LVM:
   if [ -x /sbin/vgchange ]; then
-    /sbin/vgchange -ay --ignorelockingfailure
+    mkdir -p /var/lock/lvm	# this avoids useless warnings
+    /sbin/vgchange -ay --ignorelockingfailure 2>/dev/null
+    /sbin/udevadm settle --timeout=10
   fi
   
   # Unlock any LUKS encrypted devices that were deferred above but have now
@@ -247,8 +250,14 @@ if [ "$RESCUE" = "" ]; then
         echo "LUKS device '${LUKSDEV}' unavailable for unlocking!"
       fi
     done
+    /sbin/udevadm settle --timeout=10
   fi
 
+  # Scan for btrfs multi-device filesystems:
+  if [ -x /sbin/btrfs ]; then
+    /sbin/btrfs device scan
+  fi
+  
   # Find root device if a label or UUID was given:
   if echo $ROOTDEV | grep -q "LABEL=" || \
      echo $ROOTDEV | grep -q "UUID=" ; then
@@ -264,14 +273,16 @@ if [ "$RESCUE" = "" ]; then
   # Resume state from swap
   if [ "$RESUMEDEV" != "" ]; then
     if ls -l $RESUMEDEV | grep -q "^l" ; then
-      RESUMEDEV=$(ls -l $RESUMEDEV | awk '{ print $NF }')
+      #RESUMEDEV=$(ls -l $RESUMEDEV | awk '{ print $NF }')
+      RESUMEDEV=$(readlink -f $RESUMEDEV)
     fi
     echo "Trying to resume from $RESUMEDEV"
     RESMAJMIN=$(ls -l $RESUMEDEV | tr , : | awk '{ print $5$6 }')
     echo $RESMAJMIN > /sys/power/resume
   fi
-  
+
   # Switch to real root partition:
+  /sbin/udevadm settle --timeout=10
   echo 0x0100 > /proc/sys/kernel/real-root-dev
   mount -o ro -t $ROOTFS $ROOTDEV /mnt
   
@@ -296,14 +307,16 @@ else
   /bin/sh
 fi
 
-if pgrep udevd >/dev/null ; then
-  /sbin/udevadm settle --timeout=30
-  pkill udevd
-fi
+# Need to make sure OPTIONS+="db_persist" exists for all dm devices
+# That should be handled in /sbin/mkinitrd now
+/sbin/udevadm info --cleanup-db
+/sbin/udevadm control --exit
 
 unset ERR
 mount -o move /proc /mnt/proc
 mount -o move /sys /mnt/sys
+mount -o move /run /mnt/run
+
 [ "$DEVTMPFS" = "1" ] && mount -o move /dev /mnt/dev
 echo "${INITRD}:  exiting"
 exec switch_root /mnt $INIT $RUNLEVEL
diff --git a/source/a/mkinitrd/mkinitrd b/source/a/mkinitrd/mkinitrd
index 1a5b7731..c5e30218 100644
--- a/source/a/mkinitrd/mkinitrd
+++ b/source/a/mkinitrd/mkinitrd
@@ -42,13 +42,15 @@
 #   Add lukskey option (-K). Automatically add kernel modules listed in
 #   load-kernel-modules if that file is executable.
 #   Yada yada yada.
+# Modified by Patrick Volkerding <volkerdi@slackware.com> 21 August 2012
+#   Add Btrfs multi-device filesystem support option (-B).
 
-MKINITRD_VERSION=1.4.6
+MKINITRD_VERSION=1.4.7
 
 # Don't include these things from /lib/udev/ in the initrd image
 LIBUDEV_BLACKLIST="\
   ipod-set-info \
-  check-mtp-camera \
+  check-mtp-device \
   check-ptp-camera \
   udev-configure-printer"
 
@@ -97,6 +99,8 @@ initrd, and the script is easy to modify.  Be creative.  :-)
           For example, if your USB thumb drive has a FAT partition with label
           "TRAVELSTICK" and the actual keyfile is called "/keys/alien.luks",
           then you need to pass: -K LABEL=TRAVELSTICK:/keys/alien.luks
+  -B      Add /sbin/btrfs to enable scanning for a root filesystem that is
+          part of a Btrfs multi-device filesystem.
   -M      Add the files in /etc/modprobe.d/ to the initrd
   -R      Add support for RAID partitions
   -V      Display version number
@@ -234,8 +238,9 @@ copy_libs() {
 }
 
 copy_modconf() {
-  mkdir -p $SOURCE_TREE/etc
+  mkdir -p $SOURCE_TREE/etc $SOURCE_TREE/lib
   cp -a /etc/modprobe.d $SOURCE_TREE/etc
+  cp -a /lib/modprobe.d $SOURCE_TREE/lib/
 }
      
 # If --help is given, print_usage and exit:
@@ -255,6 +260,8 @@ fi
 SOURCE_TREE=${SOURCE_TREE:-/boot/initrd-tree}
 OUTPUT_IMAGE=${OUTPUT_IMAGE:-""}
 KERNEL_VERSION=${KERNEL_VERSION:-"$(uname -r)"}
+# The initrd requires udev to function correctly:
+UDEV=1
 
 # Default actions without options:
 if [ -z "$1" ]; then
@@ -356,6 +363,10 @@ while [ ! -z "$1" ]; do
       LVM=1
       shift
       ;;
+    -B)
+      BTRFS=1
+      shift
+      ;;
     -M)
       MODCONF=1
       shift
@@ -459,12 +470,28 @@ fi
 
 # Include RAID support in initrd
 if [ ! -z "$RAID" ]; then
-  if [ -r /sbin/mdadm ]; then
+  if [ -r /sbin/mdadm -a -r /sbin/mdmon ]; then
     mkdir -p $SOURCE_TREE/sbin
     cp /sbin/mdadm $SOURCE_TREE/sbin/mdadm
+    cp /sbin/mdmon $SOURCE_TREE/sbin/mdmon
     chmod 0755 $SOURCE_TREE/sbin/mdadm
+    chmod 0755 $SOURCE_TREE/sbin/mdmon
+    mkdir -p $SOURCE_TREE/lib/udev/rules.d
+    echo 'KERNEL=="dm-[0-9]*", OPTIONS+="db_persist"' > \
+      $SOURCE_TREE/lib/udev/rules.d/95-dm-initrd.rules
+  else
+    echo "ERROR:  mdadm and/or mdmon binary is missing, RAID support not installed"
+  fi
+fi
+
+# Include Btrfs support in initrd
+if [ ! -z "$BTRFS" ]; then
+  if [ -r /sbin/btrfs ]; then
+    mkdir -p $SOURCE_TREE/sbin
+    cp /sbin/btrfs $SOURCE_TREE/sbin/btrfs
+    chmod 0755 $SOURCE_TREE/sbin/btrfs
   else
-    echo "ERROR:  mdadm binary is missing, RAID support not installed"
+    echo "ERROR:  btrfs binary is missing, Btrfs support not installed"
   fi
 fi
 
@@ -474,7 +501,11 @@ if [ ! -z "$UDEV" ]; then
   cp -a /lib/udev $SOURCE_TREE/lib/
   # But we don't want all of /lib/udev
   for file in $(echo $LIBUDEV_BLACKLIST) ; do
-    rm -f $SOURCE_TREE/lib/udev/$file ;
+    # Replace with a null script (avoids error spew):
+    cat << EOF > $SOURCE_TREE/lib/udev/$file
+#!/bin/ash
+# This space is intentionally left blank
+EOF
   done
 fi
 
@@ -493,6 +524,9 @@ if [ ! -z "$LVM" ]; then
     elif ! echo ${MODULE_LIST} | grep -q dm-mod ; then
       MODULE_LIST="$MODULE_LIST:dm-mod"
     fi
+    mkdir -p $SOURCE_TREE/lib/udev/rules.d
+    echo 'KERNEL=="dm-[0-9]*", OPTIONS+="db_persist"' > \
+      $SOURCE_TREE/lib/udev/rules.d/95-dm-initrd.rules
   else
     echo "LVM binary is missing, LVM support isn't installed"
   fi
@@ -528,6 +562,16 @@ if [ ! -d $SOURCE_TREE/lib/modules/$KERNEL_VERSION ]; then
   mkdir -p $SOURCE_TREE/lib/modules/$KERNEL_VERSION
 fi
 
+# Copy kmod/modprobe stuff to initrd:
+for i in kmod depmod insmod lsmod modinfo modprobe rmmod ; do
+  rm -f $SOURCE_TREE/sbin/$i ;
+  cp -a /sbin/$i $SOURCE_TREE/sbin ;
+done
+
+# Make sure modules.builtin and modules.order are there (for kmod):
+cp /lib/modules/$KERNEL_VERSION/modules.{builtin,order} \
+   $SOURCE_TREE/lib/modules/$KERNEL_VERSION
+
 # If an executable $SOURCE_TREE/load_kernel_modules already exists, then
 # we assume you will want to load the kernel modules mentioned in there.
 # This means, you do not have to explicitly add those on the commandline:
@@ -589,8 +633,8 @@ if [ ! -z "$MODULE_LIST" ]; then
   /sbin/modprobe --set-version $KERNEL_VERSION --show-depends --ignore-install $MODULE 2>/dev/null \
     | grep "^insmod " | cut -f 2 -d ' ' | while read SRCMOD; do
 
-      if ! grep -q "$(basename $SRCMOD .ko)" $SOURCE_TREE/load_kernel_modules 2>/dev/null ; then
-        LINE="$(echo "modprobe -v $(basename $SRCMOD .ko)" )"
+      if ! grep -Eq " $(basename $SRCMOD .ko)(\.| |$)" $SOURCE_TREE/load_kernel_modules 2>/dev/null ; then
+        LINE="$(echo "modprobe -v $(basename ${SRCMOD%%.gz} .ko)" )"
 
         # Test to see if arguments should be passed
         # Over-ride the previously defined LINE variable if so
@@ -611,6 +655,15 @@ if [ ! -z "$MODULE_LIST" ]; then
       # replacement.
       if cp -a --parents $SRCMOD $SOURCE_TREE 2>/dev/null; then
         echo "OK: $SRCMOD added."
+        # If a module needs firmware, copy that too
+        /sbin/modinfo -F firmware "$SRCMOD" | sed 's/^/\/lib\/firmware\//' |
+        while read SRCFW; do
+          if cp -a --parents "$SRCFW" $SOURCE_TREE 2>/dev/null; then
+            echo "OK: $SRCFW added."
+          else
+            echo "WARNING:  Could not find firmware \"$SRCFW\""
+          fi
+        done
       else
         echo "WARNING:  Could not find module \"$SRCMOD\""
       fi
@@ -631,6 +684,11 @@ fi
 # Copy needed libraries
 copy_libs
 
+# Make sure all libraries have symlinks:
+/sbin/ldconfig $(readlink -f $SOURCE_TREE)/lib/ 2> /dev/null
+/sbin/ldconfig $(readlink -f $SOURCE_TREE)/lib64/ 2> /dev/null
+/sbin/ldconfig
+
 # And finally, build the initrd:
 build_initrd_image
 
diff --git a/source/a/mkinitrd/mkinitrd.8 b/source/a/mkinitrd/mkinitrd.8
index be4e9d42..6ee25bdd 100644
--- a/source/a/mkinitrd/mkinitrd.8
+++ b/source/a/mkinitrd/mkinitrd.8
@@ -52,6 +52,9 @@ mkinitrd \- create or rebuilt an initrd (initial ramdisk) using initramfs (simpl
 .B \-K luks_keyfile
 ]
 [
+.B \-B
+]
+[
 .B \-L
 ]
 [
@@ -171,6 +174,11 @@ you need to set:
 
   -K LABEL=TRAVELSTICK:/keys/alien.luks
 .TP
+.B \-B
+This option adds the btrfs utility to the initrd so that multi-device filesystems
+will be picked up by a scan (/sbin/btrfs device scan).  This is needed if the
+root filesystem is a Btrfs multi-device filesystem.
+.TP
 .B \-L
 This option adds LVM support to the initrd, if the tools are
 available on the system.
diff --git a/source/a/mkinitrd/mkinitrd.SlackBuild b/source/a/mkinitrd/mkinitrd.SlackBuild
index 953d3cf8..322fa8c5 100755
--- a/source/a/mkinitrd/mkinitrd.SlackBuild
+++ b/source/a/mkinitrd/mkinitrd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-1.4.6}
-BB=1.18.4
-BUILD=${BUILD:-11}
+VERSION=${VERSION:-1.4.7}
+BB=1.20.1
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -54,6 +54,12 @@ rm -rf busybox-$BB
 tar xvf $CWD/busybox-$BB.tar.?z* || exit 1
 cd busybox-$BB
 
+if [ -d $CWD/fixes-$BB ]; then
+  for pfile in $CWD/fixes-$BB/*.patch ; do 
+    patch -p1 < $pfile || exit 1 
+  done
+fi
+
 chown -R root:root .
 sed -e \
   's#^CONFIG_PREFIX=.*#CONFIG_PREFIX="'$PKG'/usr/share/mkinitrd/initrd-tree"#' \
@@ -105,29 +111,18 @@ chown root:root $PKG/etc/mkinitrd.conf.sample
 chmod 644 $PKG/etc/mkinitrd.conf.sample
 
 mkdir -p $PKG/usr/doc/mkinitrd-$VERSION
-cp -a $CWD/README.initrd $PKG/usr/doc/mkinitrd-$VERSION
-
-( cd $PKG/usr/doc/mkinitrd-$VERSION
-  DATE="$(date)"
-  KERNEL_VERSION="$(uname -r)"
-  PACKAGE_VERSION="$(uname -r | tr - _)"
-  LILO_KERNEL_NAME="$(echo $(uname -r) | tr -d . | tr -d - )"
-  cat README.initrd | sed -e s/@DATE@/"$DATE"/ > README.initrd1
-  cat README.initrd1 | sed -e s/@KERNEL_VERSION@/"$KERNEL_VERSION"/ > README.initrd2
-  cat README.initrd2 | sed -e s/@PACKAGE_VERSION@/"$PACKAGE_VERSION"/ > README.initrd3
-  cat README.initrd3 | sed -e s/@LILO_KERNEL_NAME@/"$LILO_KERNEL_NAME"/ > README.initrd4
-  cat README.initrd4 | sed -e s/@MKINITRD_VERSION@/"$VERSION"/ > README.initrd5
-  cat README.initrd5 | sed -e s/@ARCH@/"$ARCH"/ > README.initrd6
-  cat README.initrd6 | sed -e s/@BUILD@/"$BUILD"/ > README.initrd
-  rm -f README.initrd{1,2,3,4,5,6}
-)
-chmod 644 $PKG/usr/doc/mkinitrd-$VERSION/*
-chown root:root $PKG/usr/doc/mkinitrd-$VERSION/*
+sed $CWD/README.initrd \
+  -e "s,@DATE@,$(date),g" \
+  -e "s,@KERNEL_VERSION@,$(uname -r),g" \
+  -e "s,@PACKAGE_VERSION@,$(uname -r | tr - _),g" \
+  -e "s,@LILO_KERNEL_NAME@,$(echo $(uname -r) | tr -d . | tr -d - ),g" \
+  -e "s,@MKINITRD_VERSION@,$VERSION,g" \
+  -e "s,@ARCH@,$ARCH,g" \
+  -e "s,@BUILD@,$BUILD,g" \
+  > $PKG/usr/doc/mkinitrd-$VERSION/README.initrd
 
 mkdir $PKG/boot
-( cd $PKG/boot
-  ln -sf /usr/doc/mkinitrd-$VERSION/README.initrd .
-)
+ln -sf /usr/doc/mkinitrd-$VERSION/README.initrd $PKG/boot/README.initrd
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/a/module-init-tools/doinst.sh b/source/a/module-init-tools/doinst.sh
deleted file mode 100644
index f455be89..00000000
--- a/source/a/module-init-tools/doinst.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-# Remove/move obsolete configuration:
-if [ -L etc/modprobe.d/modprobe.conf ]; then
-  rm -f etc/modprobe.d/modprobe.conf
-fi
-if [ -e etc/modprobe.conf ]; then
-  mv etc/modprobe.conf etc/modprobe.conf.obsolete
-fi
diff --git a/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff b/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff
deleted file mode 100644
index 5517502b..00000000
--- a/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff
+++ /dev/null
@@ -1,41 +0,0 @@
-diff -Nur module-init-tools-3.12.orig//modprobe.c module-init-tools-3.12/modprobe.c
---- module-init-tools-3.12.orig//modprobe.c	2010-05-04 00:19:27.000000000 -0500
-+++ module-init-tools-3.12/modprobe.c	2010-06-08 04:32:46.655088739 -0500
-@@ -38,6 +38,7 @@
- #include <asm/unistd.h>
- #include <sys/wait.h>
- #include <syslog.h>
-+#include <regex.h>
- 
- #include "util.h"
- #include "elfops.h"
-@@ -789,6 +790,20 @@
- 	return strsep(string, delim);
- }
- 
-+/* Let's exclude a few file extensions */
-+static int valid_file_name(const char *filename)
-+{
-+	static regex_t *re = NULL;
-+
-+	if (!re) {
-+		re = NOFAIL(malloc(sizeof(regex_t)));
-+		if (regcomp(re, "(^(\\.|\\.\\.)|\\.(new|orig|bak)$)",
-+			REG_EXTENDED|REG_NOSUB) != 0)
-+				fatal("regcomp failed: %s\n", strerror(errno));
-+		}
-+		return regexec(re, filename, 0, NULL, 0);
-+}
-+
- static int parse_config_scan(const char *filename,
- 			     struct modprobe_conf *conf,
- 			     int dump_only,
-@@ -1066,6 +1081,8 @@
- 		while ((i = readdir(dir)) != NULL) {
- 			size_t len;
- 
-+			if (!valid_file_name(i->d_name))
-+				continue;
- 			if (i->d_name[0] == '.')
- 				continue;
- 			if (!config_filter(i->d_name))
diff --git a/source/a/module-init-tools/module-init-tools.SlackBuild b/source/a/module-init-tools/module-init-tools.SlackBuild
deleted file mode 100755
index a8dc73ab..00000000
--- a/source/a/module-init-tools/module-init-tools.SlackBuild
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-VERSION=${VERSION:-$(echo module-init-tools-*.tar.?z* | cut -d - -f 4 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-2}
-
-NUMJOBS=${NUMJOBS:--j7}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-module-init-tools
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf module-init-tools-$VERSION
-tar xvf $CWD/module-init-tools-$VERSION.tar.?z* || exit 1
-cd module-init-tools-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Exclude *.{old,new,bak} files (and a few others that obviously aren't
-# valid for this...  Thanks to Marco d'Itri for the patch that it's based on
-zcat $CWD/modprobe.ignore_some_suffixes.diff.gz | patch -p1 || exit 1
-
-# Using --bindir=/sbin to make lsmod go there too
-CFLAGS= \
-./configure \
-  --prefix=/ \
-  --bindir=/sbin \
-  --docdir=/usr/doc/module-init-tools-$VERSION \
-  --mandir=/usr/man \
-  --enable-zlib \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Create the config directory just in case
-mkdir -p $PKG/etc/modprobe.d/
-
-# Link lsmod into /bin
-mkdir -p $PKG/bin
-( cd $PKG/bin ; ln -sf /sbin/lsmod . )
-
-# Compress manpages
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/usr/doc/module-init-tools-$VERSION
-cp -a \
-  AUTHORS CODING COPYING FAQ README TODO \
-  $PKG/usr/doc/module-init-tools-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/module-init-tools-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/a/module-init-tools/slack-desc b/source/a/module-init-tools/slack-desc
deleted file mode 100644
index 99d071b0..00000000
--- a/source/a/module-init-tools/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler-------------------------------------------------------|
-module-init-tools: module-init-tools (kernel module utilities)
-module-init-tools:
-module-init-tools: Utilities to load and unload kernel modules.  These are used on Linux
-module-init-tools: to load extra drivers or other features into the running kernel.
-module-init-tools:
-module-init-tools:
-module-init-tools:
-module-init-tools:
-module-init-tools:
-module-init-tools:
-module-init-tools:
diff --git a/source/a/ntfs-3g/99-ntfs-3g.rules b/source/a/ntfs-3g/99-ntfs-3g.rules
new file mode 100644
index 00000000..c27c3cbb
--- /dev/null
+++ b/source/a/ntfs-3g/99-ntfs-3g.rules
@@ -0,0 +1,2 @@
+# Use ntfs-3g rather than regular ntfs for devices detected through udev:
+ENV{ID_FS_TYPE}=="ntfs", ENV{ID_FS_TYPE}="ntfs-3g"
diff --git a/source/a/ntfs-3g/ntfs-3g.SlackBuild b/source/a/ntfs-3g/ntfs-3g.SlackBuild
index ab5b1f71..086cb3e8 100755
--- a/source/a/ntfs-3g/ntfs-3g.SlackBuild
+++ b/source/a/ntfs-3g/ntfs-3g.SlackBuild
@@ -3,6 +3,7 @@
 # Slackware build script for ntfs-3g
 
 # Copyright 2008  Antonio Hernandez Blas <hba.nihilismus@gmail.com>
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -26,9 +27,10 @@
 # Modified by Eric Hameleers <alien@slackware.com>
 
 PKGNAM=ntfs-3g
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+VERSION=2012.1.15
+BUILD=${BUILD:-2}
 
+SRCNAM=ntfs-3g_ntfsprogs
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
 # Automatically determine the architecture we're building on:
@@ -62,9 +64,9 @@ PKG=$TMP/package-$PKGNAM
 rm -rf $PKG 
 mkdir -p $TMP $PKG
 cd $TMP || exit 1
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1
+cd $SRCNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -90,17 +92,45 @@ CXXFLAGS="$SLKCFLAGS" \
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# I hate to do this (it worked without it before), but recently /bin/ntfs-3g
+# ceased to work for non-root users unless it is setuid root.  If anyone has
+# any better ideas, I'd like to hear them.
+chmod 4711 $PKG/bin/ntfs-3g
+
 # Add the HAL fdi file so that automount uses ntfs-3g for mounting
 # This should work with the "volume.fstype.alternative.*" in hal-0.5.12+
 mkdir -p $PKG/usr/share/hal/fdi/policy/10osvendor
 cat $CWD/10-ntfs-3g-policy.fdi \
   > $PKG/usr/share/hal/fdi/policy/10osvendor/10-ntfs-3g-policy.fdi
 
+# Create a mount.ntfs -> mount.ntfs-3g symlink.
+# This causes ntfs-3g to always be used when mounting NTFS filesystems.
+# NOTE:  This also seems to make mounting with the old ntfs filesystem
+# impossible.  But does anyone care?
+( cd $PKG/sbin ; ln -s mount.ntfs-3g mount.ntfs )
+
+## Add a udev rule to use ntfs-3g instead of ntfs:
+## (This is not needed if the mount.ntfs symlink is made)
+#mkdir -p $PKG/lib/udev/rules.d
+#cat $CWD/99-ntfs-3g.rules > $PKG/lib/udev/rules.d/99-ntfs-3g.rules
+
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 rm -rf $PKG/usr/share/doc
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
diff --git a/source/a/patch/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff b/source/a/patch/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff
new file mode 100644
index 00000000..b882b725
--- /dev/null
+++ b/source/a/patch/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff
@@ -0,0 +1,78 @@
+From 281537bcd92515ae3b9f154acd579ce97260f99b Mon Sep 17 00:00:00 2001
+From: Andreas Gruenbacher <agruen@linbit.com>
+Date: Thu, 13 Sep 2012 14:13:08 +0000
+Subject: In a git-style diff, make sure not to unlink the original by accident
+
+* src/patch.c (main): Fail if a file is not empty as expected.
+(output_files): In a git-style diff, make sure not to unlink the original when
+making a backup of an unmodified file.
+* tests/create-delete: Fix failed-file-deletion test and add
+successful-file-deletion test.
+---
+diff --git a/src/patch.c b/src/patch.c
+index 1c6fb4b..ce81bbe 100644
+--- a/src/patch.c
++++ b/src/patch.c
+@@ -508,6 +508,7 @@ main (int argc, char **argv)
+ 		  && ! (merge && somefailed))
+ 		{
+ 		  mismatch = true;
++		  somefailed = true;
+ 		  if (verbosity != SILENT)
+ 		    say ("File %s is not empty after patch, as expected\n",
+ 			 quotearg (outname));
+@@ -1865,7 +1866,7 @@ output_files (struct stat const *st)
+       output_file_now (file_to_output->from, &from_needs_removal,
+ 		       from_st, file_to_output->to,
+ 		       file_to_output->mode, file_to_output->backup);
+-      if (from_needs_removal)
++      if (file_to_output->to && from_needs_removal)
+ 	unlink (file_to_output->from);
+ 
+       if (st && st->st_dev == from_st->st_dev && st->st_ino == from_st->st_ino)
+diff --git a/tests/create-delete b/tests/create-delete
+index 9a6e1bb..7eed11f 100644
+--- a/tests/create-delete
++++ b/tests/create-delete
+@@ -176,12 +176,37 @@ EOF
+ echo data > target
+ cat > p.diff <<EOF
+ diff --git a/target b/target
+-index 1..0
++deleted file mode 100644
++index 1269488..0000000
+ EOF
+ 
+ check 'patch -p1 -b < p.diff || echo status: $?' <<EOF
+ patching file target
+ File target is not empty after patch, as expected
++status: 1
++EOF
++
++check 'cat target' <<EOF
++data
++EOF
++
++# Patch creates a backup file even when the original file remains unchanged:
++check 'cat target.orig' <<EOF
++data
++EOF
++
++cat > p.diff <<EOF
++diff --git a/target b/target
++deleted file mode 100644
++index 1269488..0000000
++--- a/target
+++++ /dev/null
++@@ -1 +0,0 @@
++-data
++EOF
++
++check 'patch -p1 -b -f < p.diff || echo status: $?' <<EOF
++patching file target
+ EOF
+ 
+ ncheck 'test ! -e target'
+--
+cgit v0.9.0.2
+
diff --git a/source/a/patch/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff b/source/a/patch/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff
new file mode 100644
index 00000000..14c342a5
--- /dev/null
+++ b/source/a/patch/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff
@@ -0,0 +1,88 @@
+From 99f2638763845d8173a0c9f9209ac2b4be947165 Mon Sep 17 00:00:00 2001
+From: Andreas Gruenbacher <agruen@linbit.com>
+Date: Tue, 18 Sep 2012 10:51:17 +0000
+Subject: Fix file truncation when switching from git diff to non-git diff
+
+* src/patch.c (main): Output queued output files only when switching from a git
+diff to a non-git diff.  This can modify the input file, so make sure to
+stat() it again.
+* tests/concat-git-diff: Add test case growing a file with a git diff and then
+with a non-git diff; without this fix; the result would be truncated.
+---
+diff --git a/src/patch.c b/src/patch.c
+index 0bce8fb..0b0fdd4 100644
+--- a/src/patch.c
++++ b/src/patch.c
+@@ -196,8 +196,12 @@ main (int argc, char **argv)
+ 
+       if (have_git_diff != pch_git_diff ())
+ 	{
++	  if (have_git_diff)
++	    {
++	      output_files (NULL);
++	      inerrno = -1;
++	    }
+ 	  have_git_diff = ! have_git_diff;
+-	  output_files (NULL);
+ 	}
+ 
+       if (TMPREJNAME_needs_removal)
+diff --git a/tests/concat-git-diff b/tests/concat-git-diff
+index 927eb5a..c78da53 100644
+--- a/tests/concat-git-diff
++++ b/tests/concat-git-diff
+@@ -56,11 +56,7 @@ check 'cat f' <<EOF
+ three
+ EOF
+ 
+-cat > f <<EOF
+-1
+-2
+-3
+-EOF
++seq 3 > f
+ 
+ cat > concat2.diff <<EOF
+ diff --git a/f b/f
+@@ -95,3 +91,38 @@ a
+ 3
+ b
+ EOF
++
++seq 3 > f
++
++cat > concat3.diff <<EOF
++diff --git a/f b/f
++index 01e79c3..0d0b976 100644
++--- a/f
+++++ b/f
++@@ -1,3 +1,4 @@
++ 1
++ 2
++ 3
+++b
++diff a/f b/f
++--- a/f
+++++ b/f
++@@ -1,3 +1,4 @@
+++a
++ 1
++ 2
++ 3
++EOF
++
++check 'patch -p1 < concat3.diff || echo "Status: $?"' <<EOF
++patching file f
++patching file f
++EOF
++
++check 'cat f' <<EOF
++a
++1
++2
++3
++b
++EOF
+--
+cgit v0.9.0.2
+
diff --git a/source/a/patch/patch.SlackBuild b/source/a/patch/patch.SlackBuild
index 1175620b..1607b405 100755
--- a/source/a/patch/patch.SlackBuild
+++ b/source/a/patch/patch.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,8 +20,8 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=2.6.1
-BUILD=${BUILD:-1}
+VERSION=2.7
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -53,7 +53,11 @@ fi
 cd $TMP
 rm -rf patch-${VERSION}
 tar xvf $CWD/patch-${VERSION}.tar.xz || exit 1
-cd patch-${VERSION}
+cd patch-${VERSION} || exit 1
+
+zcat $CWD/patch.281537bcd92515ae3b9f154acd579ce97260f99b.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/patch.99f2638763845d8173a0c9f9209ac2b4be947165.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/a/pciutils/pciutils.SlackBuild b/source/a/pciutils/pciutils.SlackBuild
index b3425b6a..03268420 100755
--- a/source/a/pciutils/pciutils.SlackBuild
+++ b/source/a/pciutils/pciutils.SlackBuild
@@ -24,7 +24,7 @@
 VERSION=${VERSION:-$(echo pciutils-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
-NUMJOBS=${NUMJOBS:--j6}
+NUMJOBS=${NUMJOBS:--j3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -65,21 +65,19 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Fetch the latest pci.ids:
-rm -f pci.ids
-sh update-pciids.sh
-# Now fix the update-pciids script and preinstall it before 'make install' 
-# decides that it knows best
-zcat $CWD/pciutils.ids.dest.diff.gz | patch -p1 --verbose || exit 1
-mkdir -p $PKG/usr/sbin
-cat update-pciids.sh > $PKG/usr/sbin/update-pciids
-chmod 0755 $PKG/usr/sbin/update-pciids
+zcat $CWD/pciutils.dontcompress.diff.gz | patch -p1 || exit 1
+zcat $CWD/pciutils.update.pci.ids.url.diff.gz | patch -p1 || exit 1
 
+# Make and install the shared library
 make \
   PREFIX=/usr \
   SBINDIR=/sbin \
   LIBDIR=/usr/lib${LIBDIRSUFFIX} \
   MANDIR=/usr/man \
+  IDSDIR=/usr/share/hwdata \
+  PCI_IDS=pci.ids \
+  PCI_COMPRESSED_IDS=0 \
+  SHARED=no \
   OPT="$SLKCFLAGS" \
   $NUMJOBS || exit 1
 
@@ -88,26 +86,52 @@ make install install-lib \
   SBINDIR=/sbin \
   LIBDIR=/usr/lib${LIBDIRSUFFIX} \
   MANDIR=/usr/man \
+  IDSDIR=/usr/share/hwdata \
+  PCI_IDS=pci.ids \
+  PCI_COMPRESSED_IDS=0 \
+  SHARED=no \
   DESTDIR=$PKG
 
-# Do not compress pci.ids - hal needs it uncompressed
+mkdir -p $PKG/usr/sbin
+mv $PKG/sbin/update-pciids $PKG/usr/sbin/update-pciids
+
+# Do not compress pci.ids
 ( cd $PKG/usr/share ; gzip -d pci.ids.gz )
-# Remove the update-pciids script that 'make install' placed
-rm -f $PKG/sbin/update-pciids
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
+# Put a compat symlink in place 
+ln -s hwdata/pci.ids $PKG/usr/share/pci.ids
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
 mkdir -p $PKG/usr/doc/pciutils-$VERSION
 cp -a \
-  ChangeLog README TODO \
+  COPYING* README TODO \
   $PKG/usr/doc/pciutils-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/a/pciutils/pciutils.dontcompress.diff b/source/a/pciutils/pciutils.dontcompress.diff
new file mode 100644
index 00000000..91089b8e
--- /dev/null
+++ b/source/a/pciutils/pciutils.dontcompress.diff
@@ -0,0 +1,11 @@
+--- ./update-pciids.sh.orig	2012-01-14 08:29:38.000000000 -0600
++++ ./update-pciids.sh	2012-07-02 21:27:47.524912718 -0500
+@@ -5,7 +5,7 @@
+ set -e
+ SRC="http://pci-ids.ucw.cz/v2.2/pci.ids"
+ DEST=pci.ids
+-PCI_COMPRESSED_IDS=
++PCI_COMPRESSED_IDS=0
+ GREP=grep
+ 
+ # if pci.ids is read-only (because the filesystem is read-only),
diff --git a/source/a/pciutils/pciutils.ids.dest.diff b/source/a/pciutils/pciutils.ids.dest.diff
deleted file mode 100644
index 98d152c2..00000000
--- a/source/a/pciutils/pciutils.ids.dest.diff
+++ /dev/null
@@ -1,14 +0,0 @@
-diff -Nur pciutils-3.1.3.orig/update-pciids.sh pciutils-3.1.3/update-pciids.sh
---- pciutils-3.1.3.orig/update-pciids.sh	2008-11-10 17:11:51.000000000 -0600
-+++ pciutils-3.1.3/update-pciids.sh	2009-07-29 02:23:53.102308103 -0500
-@@ -3,8 +3,8 @@
- [ "$1" = "-q" ] && quiet=true || quiet=false
- 
- set -e
--SRC="http://pciids.sourceforge.net/v2.2/pci.ids"
--DEST=pci.ids
-+SRC="http://pciids.sourceforge.net/pci.ids"
-+DEST=/usr/share/pci.ids
- PCI_COMPRESSED_IDS=
- GREP=grep
- 
diff --git a/source/a/pciutils/pciutils.update.pci.ids.url.diff b/source/a/pciutils/pciutils.update.pci.ids.url.diff
new file mode 100644
index 00000000..1588f729
--- /dev/null
+++ b/source/a/pciutils/pciutils.update.pci.ids.url.diff
@@ -0,0 +1,11 @@
+--- ./update-pciids.sh.orig	2012-07-02 21:45:31.280890064 -0500
++++ ./update-pciids.sh	2012-07-02 21:46:03.875889369 -0500
+@@ -3,7 +3,7 @@
+ [ "$1" = "-q" ] && quiet=true || quiet=false
+ 
+ set -e
+-SRC="http://pci-ids.ucw.cz/v2.2/pci.ids"
++SRC="http://pciids.sourceforge.net/pci.ids"
+ DEST=pci.ids
+ PCI_COMPRESSED_IDS=0
+ GREP=grep
diff --git a/source/a/pciutils/pciutils.url b/source/a/pciutils/pciutils.url
index e77494b5..66d422ce 100644
--- a/source/a/pciutils/pciutils.url
+++ b/source/a/pciutils/pciutils.url
@@ -1,2 +1,3 @@
-#ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci/
-ftp.kernel.org:/pub/software/utils/pciutils/
+ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci/
+ftp://ftp.kernel.org/pub/software/utils/pciutils/
+ftp://metalab.unc.edu/pub/Linux/hardware/
\ No newline at end of file
diff --git a/source/a/pkgtools/pkgtools.SlackBuild b/source/a/pkgtools/pkgtools.SlackBuild
index 4d3a07bf..c5bc2d43 100755
--- a/source/a/pkgtools/pkgtools.SlackBuild
+++ b/source/a/pkgtools/pkgtools.SlackBuild
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,9 +27,9 @@ fi
 PKG=$TMP/package-pkgtools
 
 # *** UPDATE THESE WITH EACH BUILD:
-VERSION=13.37
+VERSION=14.0
 ARCH=${ARCH:-noarch}
-BUILD=9
+BUILD=2
 
 if [ ! -d $TMP ]; then
   mkdir -p $TMP # location to build the source
diff --git a/source/a/pkgtools/scripts/pkgtool b/source/a/pkgtools/scripts/pkgtool
index a64ef09c..ba8ecd0a 100644
--- a/source/a/pkgtools/scripts/pkgtool
+++ b/source/a/pkgtools/scripts/pkgtool
@@ -212,7 +212,7 @@ else  # there were no arguments, so we'll get the needed information from the
  CMD_START="true"
  rm -f $TMP/SeT*
  while [ 0 ]; do
-  dialog --title "Slackware Package Tool (pkgtool version 13.37)" \
+  dialog --title "Slackware Package Tool (pkgtool version 14.0)" \
 --menu "\nWelcome to the Slackware package tool.\n\
 \nWhich option would you like?\n" 17 75 7 \
 "Current" "Install packages from the current directory" \
diff --git a/source/a/pkgtools/scripts/setup.services b/source/a/pkgtools/scripts/setup.services
index aee2599f..f700a8df 100644
--- a/source/a/pkgtools/scripts/setup.services
+++ b/source/a/pkgtools/scripts/setup.services
@@ -148,7 +148,7 @@ if [ -r etc/rc.d/rc.messagebus ]; then
     RC_MESSAGEBUS=off
   fi
   cat << EOF >> $TMP/tmpscript
-    "rc.messagebus" "D-Bus system message bus" $RC_MESSAGEBUS "Used for communication by HAL and other programs." \\
+    "rc.messagebus" "D-Bus system message bus" $RC_MESSAGEBUS "Used for interprocess communication and coordination." \\
 EOF
 fi
 
diff --git a/source/a/shadow/adduser b/source/a/shadow/adduser
index 5b674a85..ce06aac5 100644
--- a/source/a/shadow/adduser
+++ b/source/a/shadow/adduser
@@ -3,6 +3,7 @@
 # Copyright 1995  Hrvoje Dogan, Croatia.
 # Copyright 2002-2004, 2008, 2009, 2010  Stuart Winter, Surrey, England, UK.
 # Copyright 2004, 2008-2010  Slackware Linux, Inc., Concord, CA, USA
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -29,12 +30,16 @@
 # Author : Stuart Winter <mozes@slackware.com>
 #          Based on the original Slackware adduser by Hrvoje Dogan
 #          with modifications by Patrick Volkerding
-# Version: 1.13
+# Version: 1.15
 ##########################################################################
 # Usage..: adduser [<new_user_name>]
 ##########################################################################
 # History #
 ###########
+# v1.15 - 2012-09-13
+#       * Added scanner group, which may be required by third party drivers.
+# v1.14 - 2012-08-24
+#       * Added lp group, which is now required for scanning. <pjv>
 # v1.13 - 13/01/10
 #       * Fixed bug that removed underscore characters from UNIX group names.
 #         Thanks to mRgOBLIN for the report and Jim Hawkins for the fix. <sw>
@@ -107,7 +112,7 @@ defhome=/home
 defshell=/bin/bash
 defchmod=711 # home dir permissions - may be preferable to use 701, however.
 defgroup=users 
-AGID="audio cdrom floppy plugdev video power netdev" # additional groups for desktop users
+AGID="audio cdrom floppy plugdev video power netdev lp scanner" # additional groups for desktop users
 
 # Determine what the minimum UID is (for UID recycling)
 # (we ignore it if it's not at the beginning of the line (i.e. commented out with #))
diff --git a/source/a/shadow/login.defs b/source/a/shadow/login.defs
index dde37c97..e52f91a5 100644
--- a/source/a/shadow/login.defs
+++ b/source/a/shadow/login.defs
@@ -300,7 +300,7 @@ CHFN_RESTRICT		frwh
 # If set to DES, DES-based algorithm will be used for encrypting password (default)
 # Overrides the MD5_CRYPT_ENAB option
 #
-ENCRYPT_METHOD MD5
+ENCRYPT_METHOD SHA256
 
 #
 # Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
@@ -327,7 +327,9 @@ ENCRYPT_METHOD MD5
 # access to these groups, even when not logged in on the console.
 # How to do it is left as an exercise for the reader...
 #
-# Most of these groups are self-explanatory.
+# Most of these groups are self-explanatory, but in the case of
+# "lp", it is because group lp is needed to use a scanner that
+# is part of a multifunction printer.
 #
 # Note that users are added to these default groups only when
 # logging into a shell with /bin/login, not when using a login
@@ -336,7 +338,7 @@ ENCRYPT_METHOD MD5
 # when the user is added with adduser or useradd, or by editing
 # /etc/group directly, preferably using "vigr"
 #
-CONSOLE_GROUPS         floppy:audio:cdrom:video:scanner
+CONSOLE_GROUPS         floppy:audio:cdrom:video:lp:scanner
 
 #
 # Should login be allowed if we can't cd to the home directory?
diff --git a/source/a/shadow/patches/README_PATCHES b/source/a/shadow/patches/README_PATCHES
index 0c639d1a..1d1f2173 100644
--- a/source/a/shadow/patches/README_PATCHES
+++ b/source/a/shadow/patches/README_PATCHES
@@ -4,6 +4,7 @@ r3055.diff: Help output to stderr not stdout.
 r3060.diff: Fix memory leaks
 r3062.diff: Avoid memzero() on a possibly NULL pointer.
 r3096.diff: Fix parsing of gshadow entries. 
+r3090.diff: Fix improper sanitizing of locale variables.
 r3160.diff: Fixed limits support (non PAM enabled versions only)
 r3194.diff: shell's name must be -su when a su fakes a login.
 r3299.diff: man/ru/Makefile.am: Remove double inclusion of $(man_nopam) 
diff --git a/source/a/shadow/patches/r3090.diff b/source/a/shadow/patches/r3090.diff
new file mode 100644
index 00000000..46057673
--- /dev/null
+++ b/source/a/shadow/patches/r3090.diff
@@ -0,0 +1,11 @@
+--- libmisc/env.c.orig	2011-02-13 11:58:11.000000000 -0600
++++ libmisc/env.c	2012-08-14 10:38:25.304917619 -0500
+@@ -251,7 +251,7 @@
+ 			if (strncmp (*cur, *bad, strlen (*bad)) != 0) {
+ 				continue;
+ 			}
+-			if (strchr (*cur, '/') != NULL) {
++			if (strchr (*cur, '/') == NULL) {
+ 				continue;	/* OK */
+ 			}
+ 			for (move = cur; NULL != *move; move++) {
diff --git a/source/a/shadow/patches/r3299.diff b/source/a/shadow/patches/unused/r3299.diff
index a46b18f0..a46b18f0 100644
--- a/source/a/shadow/patches/r3299.diff
+++ b/source/a/shadow/patches/unused/r3299.diff
diff --git a/source/a/shadow/shadow.SlackBuild b/source/a/shadow/shadow.SlackBuild
index c3d2e9c7..41e9353b 100755
--- a/source/a/shadow/shadow.SlackBuild
+++ b/source/a/shadow/shadow.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 PKGNAM=shadow
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-7}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -63,8 +63,12 @@ for patch in $CWD/patches/*.diff.gz ; do
   zcat $patch | patch -p0 --verbose || exit 1
 done
 
+# Don't duplicate Russian man page installations:
+zcat $CWD/shadow.man.nodups.diff.gz | patch -p1 --verbose || exit 1
+
 # Re-run automake because of r3299 patch to man/ru/Makefile.am:
-automake -f
+# (not used because it doesn't work...  above patch does the intended fix)
+#automake -f
 
 chown -R root:root .
 find . \
diff --git a/source/a/shadow/shadow.man.nodups.diff b/source/a/shadow/shadow.man.nodups.diff
new file mode 100644
index 00000000..425321b9
--- /dev/null
+++ b/source/a/shadow/shadow.man.nodups.diff
@@ -0,0 +1,11 @@
+--- ./man/ru/Makefile.in.orig	2011-02-15 16:18:21.000000000 -0600
++++ ./man/ru/Makefile.in	2012-06-26 23:21:34.866292111 -0500
+@@ -228,7 +228,7 @@
+ 	grpunconv.8 gshadow.5 lastlog.8 login.1 login.defs.5 logoutd.8 \
+ 	newgrp.1 newusers.8 nologin.8 passwd.1 passwd.5 pwck.8 \
+ 	pwconv.8 pwunconv.8 sg.1 shadow.3 shadow.5 su.1 suauth.5 \
+-	useradd.8 userdel.8 usermod.8 vigr.8 vipw.8 $(am__append_1)
++	useradd.8 userdel.8 usermod.8 vigr.8 vipw.8
+ man_nopam = \
+ 	limits.5 \
+ 	login.access.5 \
diff --git a/source/a/slocate/slocate.CVE-2007-0277.diff b/source/a/slocate/slocate.CVE-2007-0277.diff
new file mode 100644
index 00000000..4f109922
--- /dev/null
+++ b/source/a/slocate/slocate.CVE-2007-0277.diff
@@ -0,0 +1,42 @@
+--- slocate-3.1.orig/src/utils.c
++++ slocate-3.1/src/utils.c
+@@ -524,6 +524,7 @@
+ {
+ 	struct stat path_stat;
+ 	int ret = 0;
++	char *path_copy = NULL;
+ 	char *ptr = NULL;
+ 
+ 	if (lstat(path, &path_stat) == -1)
+@@ -532,15 +533,25 @@
+ 	if (!S_ISLNK(path_stat.st_mode)) {
+ 		if (access(path, F_OK) != 0)
+ 		    goto EXIT;
+-	} else if ((ptr = rindex(path, '/'))) {
+-		*ptr = 0;
+-		if (access(path, F_OK) == 0)
+-		    ret = 1;
+-		*ptr = '/';
+-		goto EXIT;
+ 	}
+ 
++	/* "path" is const, so we shouldn't modify it.  Also, for speed,
++	 * I suspect strdup/free is less expensive than the deep access
++	 * checks... */
++	if (!(path_copy = strdup(path)))
++		goto EXIT;
++
+ 	ret = 1;
++
++	/* Each directory leading to the file (symlink or not) must be
++	 * readable for us to allow it to be listed in search results. */
++	while (ret && (ptr=rindex(path_copy,'/'))) {
++		*ptr=0;
++		if (*path_copy && access(path_copy, R_OK) != 0)
++		    ret = 0;
++	}
++	free(path_copy);
++
+ EXIT:
+ 	return ret;
+ }
diff --git a/source/a/slocate/slocate.SlackBuild b/source/a/slocate/slocate.SlackBuild
index eef2fd1f..def08b8c 100755
--- a/source/a/slocate/slocate.SlackBuild
+++ b/source/a/slocate/slocate.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=3.1
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -55,8 +55,12 @@ explodepkg $CWD/_slocate.tar.gz
 
 cd $TMP
 rm -rf slocate-$VERSION
-tar xzvf $CWD/slocate-$VERSION.tar.gz
-cd slocate-$VERSION
+tar xzvf $CWD/slocate-$VERSION.tar.gz || exit 1
+cd slocate-$VERSION || exit 1
+
+zcat $CWD/slocate.bigfile.diff.gz | patch -p0 --verbose || exit 1
+zcat $CWD/slocate.CVE-2007-0277.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 2750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -65,7 +69,7 @@ find . \
   -exec chmod 644 {} \;
 
 cd src
-make CFLAGS="$SLKCFLAGS"
+make CFLAGS="$SLKCFLAGS -D_LARGEFILE64_SOURCE" || exit 1
 cd ..
 strip --strip-unneeded src/slocate
 mkdir -p $PKG/usr/bin
diff --git a/source/a/slocate/slocate.bigfile.diff b/source/a/slocate/slocate.bigfile.diff
new file mode 100644
index 00000000..6ccd1202
--- /dev/null
+++ b/source/a/slocate/slocate.bigfile.diff
@@ -0,0 +1,33 @@
+Fix 2GB limitation - brought to you by mancha
+
+--- src/utils.c.orig		2012-08-25
++++ src/utils.c			2012-08-25
+@@ -284,12 +284,12 @@ int
+ verify_slocate_db(struct g_data_s *g_data, char *file)
+ {
+ 	char ch[1];
+-	struct stat tf_stat;
++	struct stat64 tf_stat;
+ 	int bytes = 0;
+ 	int fd = -1;
+ 	
+ 	if (access(file, W_OK | R_OK) == 0) {
+-		if (lstat(file, &tf_stat) == -1) {
++		if (lstat64(file, &tf_stat) == -1) {
+ 			if (!report_error(g_data, FATAL, "get_temp_file: fstat(): %s: %s\n", file, strerror(errno)))
+ 			    goto EXIT;
+ 			
+@@ -522,11 +522,11 @@ EXIT:
+  * to check them separately */
+ int verify_access(const char *path)
+ {
+-	struct stat path_stat;
++	struct stat64 path_stat;
+ 	int ret = 0;
+ 	char *ptr = NULL;
+ 
+-	if (lstat(path, &path_stat) == -1)
++	if (lstat64(path, &path_stat) == -1)
+ 	    goto EXIT;
+ 
+ 	if (!S_ISLNK(path_stat.st_mode)) {
diff --git a/source/a/syslinux/syslinux-3.84.tar.bz2.sign b/source/a/syslinux/syslinux-3.84.tar.bz2.sign
deleted file mode 100644
index 987a8ed9..00000000
--- a/source/a/syslinux/syslinux-3.84.tar.bz2.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.9 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBLLBRQyGugalF9Dw4RAmsiAJ9geAzuilvLYCEc03sP1mJLG77UaQCeJlV+
-TgEccKCkyIkwwpBYDHesUjA=
-=1AUa
------END PGP SIGNATURE-----
diff --git a/source/a/syslinux/syslinux-4.05.tar.sign b/source/a/syslinux/syslinux-4.05.tar.sign
new file mode 100644
index 00000000..892883ae
--- /dev/null
+++ b/source/a/syslinux/syslinux-4.05.tar.sign
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.11 (GNU/Linux)
+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+=gTaU
+-----END PGP SIGNATURE-----
diff --git a/source/a/syslinux/syslinux.SlackBuild b/source/a/syslinux/syslinux.SlackBuild
index 1e7baad7..e7ec5fbb 100755
--- a/source/a/syslinux/syslinux.SlackBuild
+++ b/source/a/syslinux/syslinux.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=syslinux
-VERSION=${VERSION:-3.84}
+VERSION=${VERSION:-4.05}
 BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
@@ -43,9 +43,11 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
-tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1
 cd ${PKGNAM}-$VERSION
 
+zcat $CWD/syslinux.altmbr.diff.gz | patch -p1 --verbose || exit 1
+
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
diff --git a/source/a/syslinux/syslinux.altmbr.diff b/source/a/syslinux/syslinux.altmbr.diff
new file mode 100644
index 00000000..ee2dfbee
--- /dev/null
+++ b/source/a/syslinux/syslinux.altmbr.diff
@@ -0,0 +1,11 @@
+--- ./mbr/altmbr.S.orig	2011-12-09 12:28:17.000000000 -0600
++++ ./mbr/altmbr.S	2012-08-17 17:10:33.903688084 -0500
+@@ -204,7 +204,7 @@
+ 5:
+ 	decb	(partition)
+ 	jz	boot
+-	addw	$16, %bx
++	addw	$16, %si
+ 	loopw	5b
+ 
+ 	popw	%cx			/* %cx <- 4    */
diff --git a/source/a/sysvinit-scripts/scripts/inittab b/source/a/sysvinit-scripts/scripts/inittab
index 9f8b422d..ba6fe79e 100644
--- a/source/a/sysvinit-scripts/scripts/inittab
+++ b/source/a/sysvinit-scripts/scripts/inittab
@@ -49,7 +49,7 @@ pf::powerfail:/sbin/genpowerfail start
 pg::powerokwait:/sbin/genpowerfail stop
 
 # These are the standard console login getties in multiuser mode:
-c1:12345:respawn:/sbin/agetty 38400 tty1 linux
+c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux
 c2:12345:respawn:/sbin/agetty 38400 tty2 linux
 c3:12345:respawn:/sbin/agetty 38400 tty3 linux
 c4:12345:respawn:/sbin/agetty 38400 tty4 linux
diff --git a/source/a/sysvinit-scripts/scripts/rc.6 b/source/a/sysvinit-scripts/scripts/rc.6
index ca1b4c8e..465a0a4a 100644
--- a/source/a/sysvinit-scripts/scripts/rc.6
+++ b/source/a/sysvinit-scripts/scripts/rc.6
@@ -124,6 +124,13 @@ if echo "$PS" | /bin/grep -q -w pppd ; then
   fi
 fi
 
+# Shut down YP services:
+if [ -x /etc/rc.d/rc.yp ]; then
+  if grep -wq stop /etc/rc.d/rc.yp ; then
+    /etc/rc.d/rc.yp stop
+  fi
+fi
+
 # Bring down the networking system, but first make sure that this
 # isn't a diskless client with the / partition mounted via NFS:
 if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
@@ -158,14 +165,17 @@ if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
   . /etc/rc.d/rc.acpid stop
 fi
 
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ ! "$1" = "fast" ]; then # shutdown did not already kill all processes
+# Stop udev:
+if [ -x /etc/rc.d/rc.udev ]; then
+  sh /etc/rc.d/rc.udev force-stop
+fi
+
+# Kill all remaining processes.
+if [ ! "$1" = "fast" ]; then
+  echo "Sending all processes the SIGTERM signal."
   /sbin/killall5 -15 
   /bin/sleep 5
+  echo "Sending all processes the SIGKILL signal."
   /sbin/killall5 -9
 fi
 
diff --git a/source/a/sysvinit-scripts/scripts/rc.M b/source/a/sysvinit-scripts/scripts/rc.M
index 8772409e..63cb8801 100644
--- a/source/a/sysvinit-scripts/scripts/rc.M
+++ b/source/a/sysvinit-scripts/scripts/rc.M
@@ -83,8 +83,9 @@ if [ -x /usr/bin/fc-cache ]; then
   /usr/bin/fc-cache -f &
 fi
 
-# If we are returning from single-user mode we will need to restart
-# udevd on systems that use udev:
+# Run rc.udev again.  This will start udev if it is not already running
+# (for example, upon return from runlevel 1), otherwise it will trigger it
+# to look for device changes and to generate persistent rules if needed.
 if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
   if ! grep -wq nohotplug /proc/cmdline ; then
     if [ -x /etc/rc.d/rc.udev ]; then
@@ -187,9 +188,11 @@ if [ -x /etc/rc.d/rc.bluetooth ]; then
   sh /etc/rc.d/rc.bluetooth start
 fi
 
-# Start wicd:
-if [ -x /etc/rc.d/rc.wicd ]; then
+# Start wicd or networkmanager:
+if [ -x /etc/rc.d/rc.wicd -a -x /usr/sbin/wicd ]; then
   sh /etc/rc.d/rc.wicd start
+elif [ -x /etc/rc.d/rc.networkmanager ]; then
+  sh /etc/rc.d/rc.networkmanager start
 fi
 
 # These GTK+/pango files need to be kept up to date for
@@ -225,7 +228,7 @@ fi
 
 # Start netatalk. (a file/print server for Macs using Appletalk)
 if [ -x /etc/rc.d/rc.atalk ]; then
-  /etc/rc.d/rc.atalk
+  /etc/rc.d/rc.atalk start
 fi
 
 # Start smartd, which monitors the status of S.M.A.R.T. compatible
diff --git a/source/a/sysvinit-scripts/scripts/rc.S b/source/a/sysvinit-scripts/scripts/rc.S
index c02f1e27..97ff7be4 100644
--- a/source/a/sysvinit-scripts/scripts/rc.S
+++ b/source/a/sysvinit-scripts/scripts/rc.S
@@ -19,21 +19,27 @@ if [ -d /sys ]; then
   fi
 fi
 
+# If /run exists, mount a tmpfs on it (unless the
+# initrd has already done so):
+if [ -d /run ]; then
+  if ! grep -wq "tmpfs /run tmpfs" /proc/mounts ; then
+    /sbin/mount -v -n -t tmpfs tmpfs /run -o mode=0755
+  fi
+fi
+
 # Load the loop device kernel module:
 if [ -x /etc/rc.d/rc.loop ]; then
   . /etc/rc.d/rc.loop start
 fi
 
-# Initialize udev to manage /dev entries and hotplugging for 2.6.x kernels.
+# Initialize udev to manage /dev entries and hotplugging for 3.x kernels.
 # You may turn off udev by making the /etc/rc.d/rc.udev file non-executable
-# or giving the "nohotplug" option at boot, but in the 2.6.x+ kernels udev
-# has taken over the job of hotplug (finding hardware and loading the kernel
-# modules for it, as well as creating device nodes in /dev).  Realize that
-# if you turn off udev that you will have to load all the kernel modules
-# that you need yourself (possibly in /etc/rc.d/rc.modules, which does not
-# promise to list all of them), and make any additional device nodes that you
-# need in the /dev directory.  Even USB and IEEE1394 devices will need to have
-# the modules loaded by hand if udev is not used with a 2.6 kernel.  So use it.  :-)
+# or giving the "nohotplug" option at boot, but realize that if you turn off
+# udev that you will have to load all the kernel modules that you need
+# yourself (possibly in /etc/rc.d/rc.modules, which does not promise to list
+# all of them), and make any additional device nodes that you need in the
+# /dev directory.  Even USB and IEEE1394 devices will need to have the
+# modules loaded by hand if udev is not used.  So use it.  :-)
 if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
   if ! grep -wq nohotplug /proc/cmdline ; then
     if [ -x /etc/rc.d/rc.udev ]; then
@@ -103,10 +109,7 @@ if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
           echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
         fi
       else
-        for i in seq 1 3 ; do
-          /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
-          [ $? -eq 0 ] && break
-        done
+        /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
       fi
     elif echo $OPTS | grep -wq swap ; then
       # If any of the volumes is to be used as encrypted swap,
@@ -134,12 +137,13 @@ if [ -x /sbin/hwclock ]; then
     CLOCK_OPT="--directisa"
   fi
   if grep -wq "^UTC" /etc/hardwareclock ; then
-    echo "Setting system time from the hardware clock (UTC)."
+    echo -n "Setting system time from the hardware clock (UTC): "
     /sbin/hwclock $CLOCK_OPT --utc --hctosys
   else
-    echo "Setting system time from the hardware clock (localtime)."
+    echo -n "Setting system time from the hardware clock (localtime): "
     /sbin/hwclock $CLOCK_OPT --localtime --hctosys
   fi
+  date
 fi
 
 # Test to see if the root partition is read-only, like it ought to be.
@@ -250,18 +254,14 @@ else
   read junk;
 fi # Done checking root filesystem
 
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
 
-# Read in the correct / filesystem complete with arguments so mount will
-# show them correctly. This does not stop those arguments from functioning
-# but does prevent a small bug with /etc/mtab.
-/bin/grep ' / ' /proc/mounts | grep -v "^rootfs" > /etc/mtab
+# Any /etc/mtab that exists here is old, so we start with a new one:
+/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
+
+# Add entry for / to /etc/mtab:
+/sbin/mount -f -w /
 
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
+# Add /proc and /sys mounts to /etc/mtab:
 if [ -d /proc/sys ]; then
   /sbin/mount -f proc /proc -t proc
 fi
diff --git a/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
index 5ef34d4d..0bfca50d 100644
--- a/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
+++ b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
@@ -1,9 +1,11 @@
 #!/bin/bash
 # Skript to rescan SCSI bus, using the 
 # scsi add-single-device mechanism
-# (c) 1998--2008 Kurt Garloff <kurt@garloff.de>, GNU GPL v2 or later
+# (c) 1998--2010 Kurt Garloff <kurt@garloff.de>, GNU GPL v2 or v3
 # (c) 2006--2008 Hannes Reinecke, GNU GPL v2 or later
-# $Id: rescan-scsi-bus.sh,v 1.48 2010/08/10 19:32:22 garloff Exp $
+# $Id: rescan-scsi-bus.sh,v 1.56 2012/01/14 22:23:53 garloff Exp $
+
+SCAN_WILD_CARD=4294967295
 
 setcolor ()
 {
@@ -47,8 +49,9 @@ white_out ()
 # Return hosts. sysfs must be mounted
 findhosts_26 ()
 {
-  hosts=
-  for hostdir in /sys/class/scsi_host/host*; do
+  hosts=`find /sys/class/scsi_host/host* -maxdepth 4 -type d -o -type l 2> /dev/null | awk -F'/' '{print $5}' | sed -e 's~host~~' | sort -nu` 
+  scsi_host_data=`echo "$hosts" | sed -e 's~^~/sys/class/scsi_host/host~'` 
+  for hostdir in $scsi_host_data; do 
     hostno=${hostdir#/sys/class/scsi_host/host}
     if [ -f $hostdir/isp_name ] ; then
       hostname="qla2xxx"
@@ -57,14 +60,15 @@ findhosts_26 ()
     else
       hostname=`cat $hostdir/proc_name`
     fi
-    hosts="$hosts $hostno"
+    #hosts="$hosts $hostno"
     echo "Host adapter $hostno ($hostname) found."
   done  
   if [ -z "$hosts" ] ; then
     echo "No SCSI host adapters found in sysfs"
     exit 1;
   fi
-  hosts=`echo $hosts | sed 's/ /\n/g' | sort -n`
+  # Not necessary just use double quotes around variable to preserve new lines
+  #hosts=`echo $hosts | tr ' ' '\n'`
 }
 
 # Return hosts. /proc/scsi/HOSTADAPTER/? must exist
@@ -337,11 +341,22 @@ idlist ()
 getluns()
 {
   sgdevice
-  if test -z "$SGDEV"; then return; fi
-  if test ! -x /usr/bin/sg_luns; then echo 0; return; fi
-  LLUN=`sg_luns -d /dev/$SGDEV 2>/dev/null`
-  if test $? != 0; then echo 0; return; fi
-  echo "$LLUN" | sed -n 's/.*lun=\(.*\)/\1/p'
+  if test -z "$SGDEV"; then return 1; fi
+  if test ! -x /usr/bin/sg_luns; then echo 0; return 1; fi
+  LLUN=`sg_luns /dev/$SGDEV 2>/dev/null | sed -n 's/    \(.*\)/\1/p'`
+  if test $? != 0; then echo 0; return 1; fi
+  #echo "$LLUN" | sed -n 's/.*lun=\(.*\)/\1/p'
+  for lun in $LLUN ; do
+      # Swap LUN number
+      l0=$(printf '%u' 0x$lun)
+      l1=$(( ($l0 >> 48) & 0xffff ))
+      l2=$(( ($l0 >> 32) & 0xffff )) 
+      l3=$(( ($l0 >> 16) & 0xffff ))
+      l4=$(( $l0 & 0xffff ))
+      l0=$(( ( ( ($l4 * 0xffff) + $l3 ) * 0xffff + $l2 ) * 0xffff + $l1 ))
+      printf "%u\n" $l0
+  done
+  return 0
 }
 
 # Wait for udev to settle (create device nodes etc.)
@@ -351,6 +366,10 @@ udevadm_settle()
     print_and_scroll_back " Calling udevadm settle (can take a while) "
     /sbin/udevadm settle
     white_out
+  elif test -x /sbin/udevsettle; then
+    print_and_scroll_back " Calling udevsettle (can take a while) "
+    /sbin/udevsettle
+    white_out
   else
     usleep 20000
   fi
@@ -361,7 +380,7 @@ dolunscan()
 {
   SCSISTR=
   devnr="$host $channel $id $lun"
-  echo "Scanning for device $devnr ... "
+  echo -e " Scanning for device $devnr ... "
   printf "${yellow}OLD: $norm"
   testexist
   # Special case: lun 0 just got added (for reportlunscan),
@@ -382,10 +401,6 @@ dolunscan()
       echo -e "${norm}\e[B\e[B"
       if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
         echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/delete
-	if test $RC -eq 1 -o $lun -eq 0 ; then
-          # Try readding, should fail if device is gone
-          echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan
-	fi
 	# FIXME: Can we skip udevadm settle for removal?
 	#udevadm_settle
 	usleep 20000
@@ -440,7 +455,7 @@ doreportlun()
   lun=0
   SCSISTR=
   devnr="$host $channel $id $lun"
-  echo -en "Scanning for device $devnr ...\r"
+  echo -en " Scanning for device $devnr ...\r"
   lun0added=
   #printf "${yellow}OLD: $norm"
   # Phase one: If LUN0 does not exist, try to add
@@ -470,10 +485,31 @@ doreportlun()
     fi
   fi
   targetluns=`getluns`
+  REPLUNSTAT=$?
   lunremove=
   #echo "getluns reports " $targetluns
+  olddev=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null`
+  oldluns=`echo "$olddev" | awk -F'/' '{print $5}' | awk -F':' '{print $4}'`
+  oldtargets="$targetluns"
+  # OK -- if we don't have a LUN to send a REPORT_LUNS to, we could
+  # fall back to wildcard scanning. Same thing if the device does not
+  # support REPORT_LUNS
+  # TODO: We might be better off to ALWAYS use wildcard scanning if 
+  # it works
+  if test "$REPLUNSTAT" = "1"; then
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id -" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
+      udevadm_settle
+    else
+      echo "scsi add-single-device $host $channel $id $SCAN_WILD_CARD" > /proc/scsi/scsi
+    fi
+    targetluns=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null | awk -F'/' '{print $5}' | awk -F':' '{print $4}' | sort -n`
+    let found+=`echo "$targetluns" | wc -l`
+    let found-=`echo "$olddev" | wc -l`
+  fi
+  if test -z "$targetluns"; then targetluns="$oldtargets"; fi
   # Check existing luns
-  for dev in /sys/class/scsi_device/${host}:${channel}:${id}:*; do
+  for dev in $olddev; do
     [ -d "$dev" ] || continue
     lun=${dev##*:}
     newsearch=
@@ -589,11 +625,14 @@ if test -x /usr/bin/sg_inq; then
     sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
     sg_version=${sg_version##0.}
     #echo "\"$sg_version\""
-    if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
-        sg_len_arg="-36"
-    else
+    #if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
+        #sg_len_arg="-36"
+    #else
         sg_len_arg="--len=36"
-    fi
+    #fi
+else
+    echo "WARN: /usr/bin/sg_inq not present -- please install sg3_utils"
+    echo " or rescan-scsi-bus.sh might not fully work."     
 fi    
 
 # defaults
@@ -677,12 +716,15 @@ for host in $hosts; do
     # It's pointless to do a target scan on FC
     if test -n "$lipreset" ; then
       echo 1 > /sys/class/fc_host/host$host/issue_lip 2> /dev/null;
+      udevadm_settle
     fi
-    # Always trigger a rescan for FC to update channels and targets
-    echo "- - -" > /sys/class/scsi_host/host$host/scan 2> /dev/null;
+    # We used to always trigger a rescan for FC to update channels and targets
+    # Commented out -- as discussed with Hannes we should rely
+    # on the main loop doing the scan, no need to do it here.
+    #echo "- - -" > /sys/class/scsi_host/host$host/scan 2> /dev/null;
+    #udevadm_settle
     channelsearch=
     idsearch=
-    udevadm_settle
   else
     channelsearch=$opt_channelsearch
     idsearch=$opt_idsearch
@@ -707,3 +749,7 @@ fi
 echo "$found new device(s) found.               "
 echo "$rmvd device(s) removed.                 "
 
+# Local Variables:
+# sh-basic-offset: 2
+# End:
+
diff --git a/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh.diff b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh.diff
new file mode 100644
index 00000000..89e27693
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh.diff
@@ -0,0 +1,18 @@
+--- rescan-scsi-bus.sh.orig	2012-01-14 16:43:33.000000000 -0600
++++ rescan-scsi-bus.sh	2012-09-07 12:51:52.003994404 -0500
+@@ -625,11 +625,11 @@
+     sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
+     sg_version=${sg_version##0.}
+     #echo "\"$sg_version\""
+-    if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
+-        sg_len_arg="-36"
+-    else
++    #if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
++        #sg_len_arg="-36"
++    #else
+         sg_len_arg="--len=36"
+-    fi
++    #fi
+ else
+     echo "WARN: /usr/bin/sg_inq not present -- please install sg3_utils"
+     echo " or rescan-scsi-bus.sh might not fully work."     
diff --git a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
index c0b17ad8..cbc12030 100755
--- a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
+++ b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-1.2}
+VERSION=${VERSION:-2.0}
 ARCH=noarch
-BUILD=${BUILD:-43}
+BUILD=${BUILD:-13}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
diff --git a/source/a/sysvinit/sysvinit-2.86-timeval.patch b/source/a/sysvinit/sysvinit-2.86-timeval.patch
deleted file mode 100644
index acb0d5b6..00000000
--- a/source/a/sysvinit/sysvinit-2.86-timeval.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- sysvinit-2.86/src/utmp.c.timeval	1999-06-09 07:11:33.000000000 -0400
-+++ sysvinit-2.86/src/utmp.c	2006-08-09 19:46:26.000000000 -0400
-@@ -47,7 +47,8 @@
- 	int fd;
- 	struct utmp utmp;
- 	struct utsname uname_buf;
--
-+	struct timeval tv;
-+	
- 	/*
- 	 *	Try to open the wtmp file. Note that we even try
- 	 *	this if we have updwtmp() so we can see if the
-@@ -76,7 +77,9 @@
- 	 */
- 	memset(&utmp, 0, sizeof(utmp));
- #if defined(__GLIBC__)
--	gettimeofday(&utmp.ut_tv, NULL);
-+	gettimeofday(&tv, NULL);
-+	utmp.ut_tv.tv_sec = tv.tv_sec;
-+	utmp.ut_tv.tv_usec = tv.tv_usec;
- #else
- 	time(&utmp.ut_time);
- #endif
-@@ -113,6 +116,7 @@
- 	struct utmp utmp;
- 	struct utmp tmp;
- 	struct utmp *utmptr;
-+	struct timeval tv;
- 
- 	/*
- 	 *	Can't do much if UTMP_FILE is not present.
-@@ -144,7 +148,9 @@
- 	utmp.ut_pid = pid;
- 	strncpy(utmp.ut_id, id, sizeof(utmp.ut_id));
- #if defined(__GLIBC__)
--	gettimeofday(&utmp.ut_tv, NULL);
-+	gettimeofday(&tv, NULL);
-+	utmp.ut_tv.tv_sec = tv.tv_sec;
-+	utmp.ut_tv.tv_usec = tv.tv_usec;
- #else
- 	time(&utmp.ut_time);
- #endif
diff --git a/source/a/sysvinit/sysvinit.SlackBuild b/source/a/sysvinit/sysvinit.SlackBuild
index 194ebf14..2a9459c2 100755
--- a/source/a/sysvinit/sysvinit.SlackBuild
+++ b/source/a/sysvinit/sysvinit.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-2.86}
-BUILD=${BUILD:-6}
+VERSION=${VERSION:-2.88dsf}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -43,29 +43,23 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf sysvinit-$VERSION
-tar xzvf $CWD/sysvinit-$VERSION.tar.gz || exit 1
+tar xvf $CWD/sysvinit-$VERSION.tar.xz || exit 1
 cd sysvinit-$VERSION
 chown -R root:root .
-zcat $CWD/sysvinit.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
-zcat $CWD/sysvinit.pidof.rhforkseverything.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
-if [ "$ARCH" = "x86_64" ]; then
-  # Don't overwrite ut_addr_v6 in utmp records on 64-bit platforms
-  zcat $CWD/sysvinit-2.86-timeval.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
-fi
+
+# Fix paths for /etc/forcefsck and /etc/fastboot:
+zcat $CWD/sysvinit.paths.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
 
 cd doc
 mkdir -p $PKG/usr/doc/sysvinit-$VERSION
-cp -a Install Propaganda sysvinit-$VERSION.lsm \
+cp -a Install Propaganda sysvinit-2.86.lsm \
+  ../COPYING* ../COPYRIGHT ../README* \
   $PKG/usr/doc/sysvinit-$VERSION
 chmod -R 644 $PKG/usr/doc/sysvinit-$VERSION/*
 chmod 755 $PKG/usr/doc/sysvinit-$VERSION
 
 cd ../src
-if [ "$ARCH" = "x86_64" ]; then
-  # static 'init' segfaults, so your computer never reaches command prompt:
-  sed -i -e "s/-static//" Makefile
-fi
-make clobber
+make clobber || exit 1
 make || exit 1
 
 mkdir -p $PKG/sbin
diff --git a/source/a/sysvinit/sysvinit.diff b/source/a/sysvinit/sysvinit.diff
deleted file mode 100644
index 11477be7..00000000
--- a/source/a/sysvinit/sysvinit.diff
+++ /dev/null
@@ -1,125 +0,0 @@
-diff -Naur sysvinit-2.86.orig/man/init.8 sysvinit-2.86/man/init.8
---- sysvinit-2.86.orig/man/init.8	2004-07-29 13:21:31.000000000 +0200
-+++ sysvinit-2.86/man/init.8	2007-12-23 12:22:51.000000000 +0100
-@@ -76,7 +76,7 @@
- are processed.
- .PP
- When starting a new process, \fBinit\fP first checks whether the file
--\fI/etc/initscript\fP exists. If it does, it uses this script to
-+\fI/sbin/initscript\fP exists. If it does, it uses this script to
- start the process.
- .PP
- Each time a child terminates, \fBinit\fP records the fact and the reason
-@@ -240,7 +240,7 @@
- .SH FILES
- .nf
- /etc/inittab
--/etc/initscript
-+/sbin/initscript
- /dev/console
- /var/run/utmp
- /var/log/wtmp
-diff -Naur sysvinit-2.86.orig/man/initscript.5 sysvinit-2.86/man/initscript.5
---- sysvinit-2.86.orig/man/initscript.5	2004-06-09 14:47:45.000000000 +0200
-+++ sysvinit-2.86/man/initscript.5	2007-12-23 12:22:51.000000000 +0100
-@@ -2,15 +2,15 @@
- .SH NAME
- initscript \- script that executes inittab commands.
- .SH SYNOPSIS
--/bin/sh /etc/initscript id runlevels action process
-+/bin/sh /sbin/initscript id runlevels action process
- .SH DESCRIPTION
--When the shell script \fI/etc/initscript\fP is present, \fBinit\fP
-+When the shell script \fI/sbin/initscript\fP is present, \fBinit\fP
- will use it to execute the commands from \fIinittab\fP.
- This script can be used to set things like \fBulimit\fP and
- \fBumask\fP default values for every process.
- .SH EXAMPLES
- This is a sample initscript, which might be installed on your
--system as \fI/etc/initscript.sample\fP.
-+system as \fI/sbin/initscript.sample\fP.
- .RS
- .sp
- .nf
-@@ -20,7 +20,7 @@
- # initscript   Executed by init(8) for every program it
- #              wants to spawn like this:
- #
--#              /bin/sh /etc/initscript <id> <level> <action> <process>
-+#              /bin/sh /sbin/initscript <id> <level> <action> <process>
- #
- 
-   # Set umask to safe level, and enable core dumps.
-@@ -48,7 +48,7 @@
- .RE
- .SH FILES
- /etc/inittab,
--/etc/initscript.
-+/sbin/initscript.
- .SH AUTHOR
- Miquel van Smoorenburg ,<miquels@cistron.nl>
- .SH "SEE ALSO"
-diff -Naur sysvinit-2.86.orig/src/Makefile sysvinit-2.86/src/Makefile
---- sysvinit-2.86.orig/src/Makefile	2004-06-09 14:47:45.000000000 +0200
-+++ sysvinit-2.86/src/Makefile	2007-12-23 12:22:51.000000000 +0100
-@@ -11,7 +11,7 @@
- CC	= gcc
- CFLAGS	= -Wall -O2 -fomit-frame-pointer -D_GNU_SOURCE
- LDFLAGS	= -s
--STATIC	=
-+STATIC	= -static
- 
- # For some known distributions we do not build all programs, otherwise we do.
- BIN	=
-diff -Naur sysvinit-2.86.orig/src/initscript.sample sysvinit-2.86/src/initscript.sample
---- sysvinit-2.86.orig/src/initscript.sample	1997-11-26 14:06:33.000000000 +0100
-+++ sysvinit-2.86/src/initscript.sample	2007-12-23 12:22:51.000000000 +0100
-@@ -1,14 +1,14 @@
- #
--# initscript	If this script is intalled as /etc/initscript,
-+# initscript	If this script is intalled as /sbin/initscript,
- #		it is executed by init(8) for every program it
- #		wants to spawn like this:
- #
--#		/bin/sh /etc/initscript <id> <level> <action> <process>
-+#		/bin/sh /sbin/initscript <id> <level> <action> <process>
- #
- #		It can be used to set the default umask and ulimit
- #		of all processes. By default this script is installed
--#		as /etc/initscript.sample, so to enable it you must
--#		rename this script first to /etc/initscript.
-+#		as /sbin/initscript.sample, so to enable it you must
-+#		rename this script first to /sbin/initscript.
- #
- # Version:	@(#)initscript 1.10 10-Dec-1995 MvS.
- #
-diff -Naur sysvinit-2.86.orig/src/paths.h sysvinit-2.86/src/paths.h
---- sysvinit-2.86.orig/src/paths.h	2004-06-09 14:47:45.000000000 +0200
-+++ sysvinit-2.86/src/paths.h	2007-12-23 12:23:50.000000000 +0100
-@@ -20,21 +20,21 @@
- #define INITTAB		"/etc/inittab"		/* Location of inittab */
- #define INIT		"/sbin/init"		/* Location of init itself. */
- #define NOLOGIN		"/etc/nologin"		/* Stop user logging in. */
--#define FASTBOOT	"/fastboot"		/* Enable fast boot. */
--#define FORCEFSCK	"/forcefsck"		/* Force fsck on boot */
-+#define FASTBOOT	"/etc/fastboot"		/* Enable fast boot. */
-+#define FORCEFSCK	"/etc/forcefsck"	/* Force fsck on boot */
- #define SDPID		"/var/run/shutdown.pid"	/* PID of shutdown program */
- #define SHELL		"/bin/sh"		/* Default shell */
- #define SULOGIN		"/sbin/sulogin"		/* Sulogin */
--#define INITSCRIPT	"/etc/initscript"	/* Initscript. */
-+#define INITSCRIPT	"/sbin/initscript"	/* Initscript. */
- #define PWRSTAT		"/etc/powerstatus"	/* COMPAT: SIGPWR reason (OK/BAD) */
- 
- #if 0
- #define INITLVL		"/etc/initrunlvl"	/* COMPAT: New runlevel */
- #define INITLVL2	"/var/log/initrunlvl"	/* COMPAT: New runlevel */
- 				/* Note: INITLVL2 definition needs INITLVL */
--#define HALTSCRIPT1	"/etc/init.d/halt"	/* Called by "fast" shutdown */
-+#define HALTSCRIPT1	"/etc/init.d/rc.halt"	/* Called by "fast" shutdown */
- #define HALTSCRIPT2	"/etc/rc.d/rc.0"	/* Called by "fast" shutdown */
--#define REBOOTSCRIPT1	"/etc/init.d/reboot"	/* Ditto. */
-+#define REBOOTSCRIPT1	"/etc/init.d/rc.reboot"	/* Ditto. */
- #define REBOOTSCRIPT2	"/etc/rc.d/rc.6"	/* Ditto. */
- #endif
- 
diff --git a/source/a/sysvinit/sysvinit.paths.diff b/source/a/sysvinit/sysvinit.paths.diff
new file mode 100644
index 00000000..453a677c
--- /dev/null
+++ b/source/a/sysvinit/sysvinit.paths.diff
@@ -0,0 +1,13 @@
+--- ./src/paths.h.orig	2010-04-11 04:30:27.000000000 -0500
++++ ./src/paths.h	2012-07-31 11:43:40.646053052 -0500
+@@ -29,8 +29,8 @@
+ #define INITTAB		"/etc/inittab"		/* Location of inittab */
+ #define INIT		"/sbin/init"		/* Location of init itself. */
+ #define NOLOGIN		"/etc/nologin"		/* Stop user logging in. */
+-#define FASTBOOT	"/fastboot"		/* Enable fast boot. */
+-#define FORCEFSCK	"/forcefsck"		/* Force fsck on boot */
++#define FASTBOOT	"/etc/fastboot"		/* Enable fast boot. */
++#define FORCEFSCK	"/etc/forcefsck"	/* Force fsck on boot */
+ #define SDPID		"/var/run/shutdown.pid"	/* PID of shutdown program */
+ #define SHELL		"/bin/sh"		/* Default shell */
+ #define SULOGIN		"/sbin/sulogin"		/* Sulogin */
diff --git a/source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff b/source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff
deleted file mode 100644
index db94dcf1..00000000
--- a/source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff
+++ /dev/null
@@ -1,81 +0,0 @@
---- sysvinit-2.86/man/pidof.8.chroot	1998-09-02 08:49:33.000000000 -0400
-+++ sysvinit-2.86/man/pidof.8	2005-12-19 15:37:40.000000000 -0500
-@@ -4,6 +4,7 @@
- .SH SYNOPSIS
- .B pidof
- .RB [ \-s ]
-+.RB [ \-c ]
- .RB [ \-x ]
- .RB [ \-o
- .IR omitpid ]
-@@ -24,6 +25,10 @@
- .SH OPTIONS
- .IP -s
- Single shot - this instructs the program to only return one \fIpid\fP.
-+.IP -c
-+Only return process ids that are running with the same root directory.
-+This option does not make sense for non-root users, as they will be
-+unable to check the current root directory of processes they do not own.
- .IP -x
- Scripts too - this causes the program to also return process id's of
- shells running the named scripts.
---- sysvinit-2.86/src/killall5.c.chroot	2004-07-30 08:16:23.000000000 -0400
-+++ sysvinit-2.86/src/killall5.c	2005-12-19 15:38:47.000000000 -0500
-@@ -476,16 +476,22 @@
- 	int		f;
- 	int		first = 1;
- 	int		i, oind, opt, flags = 0;
-+	int		chroot_check = 0;
-+	struct stat	st;
-+	char		tmp[512];
- 
- 	for (oind = PIDOF_OMITSZ-1; oind > 0; oind--)
- 		opid[oind] = 0;
- 	opterr = 0;
- 
--	while ((opt = getopt(argc,argv,"ho:sx")) != EOF) switch (opt) {
-+	while ((opt = getopt(argc,argv,"hco:sx")) != EOF) switch (opt) {
- 		case '?':
- 			nsyslog(LOG_ERR,"invalid options on command line!\n");
- 			closelog();
- 			exit(1);
-+		case 'c':
-+			chroot_check = 1;
-+			break;
- 		case 'o':
- 			if (oind >= PIDOF_OMITSZ -1) {
- 				nsyslog(LOG_ERR,"omit pid buffer size %d "
-@@ -518,6 +524,16 @@
- 	argc -= optind;
- 	argv += optind;
- 
-+	/* Check if we are in a chroot */
-+	if (chroot_check) {
-+		snprintf(tmp, 512, "/proc/%d/root", getpid());
-+		if (stat(tmp, &st) < 0) {
-+			nsyslog(LOG_ERR, "stat failed for %s!\n", tmp);
-+			closelog();
-+			exit(1);
-+		}
-+	}
-+
- 	/* Print out process-ID's one by one. */
- 	readproc();
- 	for(f = 0; f < argc; f++) {
-@@ -541,6 +557,16 @@
- 					else
- 						spid = 1;
- 				}
-+				if (chroot_check) {
-+					struct stat st2;
-+					snprintf(tmp, 512, "/proc/%d/root",
-+						 p->pid);
-+					if (stat(tmp, &st2) < 0 ||
-+					    st.st_dev != st2.st_dev ||
-+					    st.st_ino != st2.st_ino) {
-+						continue;
-+					}
-+				}
- 				if (!first)
- 					printf(" ");
- 				printf("%d", p->pid);
diff --git a/source/a/tcsh/tcsh.SlackBuild b/source/a/tcsh/tcsh.SlackBuild
index 8cf4feb4..c8134a80 100755
--- a/source/a/tcsh/tcsh.SlackBuild
+++ b/source/a/tcsh/tcsh.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=6.17.00
+VERSION=6.18.01
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/a/tree/tree.SlackBuild b/source/a/tree/tree.SlackBuild
index 540b2047..7085fc99 100755
--- a/source/a/tree/tree.SlackBuild
+++ b/source/a/tree/tree.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2007-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2007-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=1.5.3
+VERSION=1.6.0
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -56,10 +56,12 @@ mkdir -p $PKG/usr/bin
 cat tree > $PKG/usr/bin/tree
 chmod 755 $PKG/usr/bin/tree
 mkdir -p $PKG/usr/man/man1
-cat man/tree.1 | gzip -9c > $PKG/usr/man/man1/tree.1.gz
+cat doc/tree.1 | gzip -9c > $PKG/usr/man/man1/tree.1.gz
+mkdir -p $PKG/usr/man/fr/man1
+cat doc/tree.1.fr | gzip -9c > $PKG/usr/man/fr/man1/tree.1.gz
 mkdir -p $PKG/usr/doc/tree-$VERSION
 cp -a \
-  CHANGES LICENSE README* \
+  CHANGES LICENSE README* TODO \
   $PKG/usr/doc/tree-$VERSION
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/a/udev/config/modprobe.d/8139cp.conf b/source/a/udev/config/modprobe.d/8139cp.conf
new file mode 100644
index 00000000..65f0af0d
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/8139cp.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate 8139 driver.  Some 8139 cards need this specific driver, though...
+blacklist 8139cp
+
diff --git a/source/a/udev/config/modprobe.d/README b/source/a/udev/config/modprobe.d/README
new file mode 100644
index 00000000..43355e82
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/README
@@ -0,0 +1,11 @@
+# /etc/modprobe.d/README
+#
+# The monolithic "blacklist" file (and others) that used to be here in this
+# directory have been split into several more fine-grained files and moved
+# to the /lib/modprobe.d/ directory.  Any file in /lib/modprobe.d/ will be
+# overridden by an identically named file in this directory (/etc/modprobe.d/)
+# or /run/modprobe.d/ (but since /run is on a tmpfs, it's not persistent
+# across reboots, so you probably don't want to use it).
+#
+# See "man modprobe.d" for more information.
+#
diff --git a/source/a/udev/config/modprobe.d/bcm43xx.conf b/source/a/udev/config/modprobe.d/bcm43xx.conf
new file mode 100644
index 00000000..55b3c2ab
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/bcm43xx.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Deprecated BCM4318 driver.
+blacklist bcm43xx
+
diff --git a/source/a/udev/config/modprobe.d/blacklist.conf.new b/source/a/udev/config/modprobe.d/blacklist.conf.new
deleted file mode 100644
index 25811703..00000000
--- a/source/a/udev/config/modprobe.d/blacklist.conf.new
+++ /dev/null
@@ -1,270 +0,0 @@
-#
-# Listing a module here prevents the hotplug scripts from loading it.
-# Usually that'd be so that some other driver will bind it instead,
-# no matter which driver happens to get probed first.  Sometimes user
-# mode tools can also control driver binding.
-
-# PC Speaker support:
-# This one is loaded by /etc/rc.d/rc.modules. If you don't like
-# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules.
-blacklist pcspkr
-
-# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
-blacklist de4x5
-
-# At least 2.4.3 and later xircom_tulip doesn't have that conflict
-# xircom_tulip_cb
-blacklist dmfe
-
-#evbug is a debug tool and should be loaded explicitly
-blacklist evbug
-
-# Alternate Intel EtherExpress Pro/100 support driver.  List it
-# here so it won't conflict with an already-loaded e100 module.
-blacklist eepro100
-
-# Alternate 8139 driver.  Some 8139 cards need this specific driver,
-# though...
-blacklist 8139cp
-
-# Deprecated BCM4318 driver.
-blacklist bcm43xx
-
-# Modules used to run a wireless adaptor as an access point.  These
-# conflict with the normal driver for the device, and so should be
-# loaded manually.
-blacklist hostap_cs
-blacklist hostap_pci
-blacklist hostap_plx
-blacklist hostap
-
-# Ethernet over IEEE1394 module.  In too many cases this will load
-# when there's no eth1394 device present (just an IEEE1394 port)
-blacklist eth1394
-
-# This module has also been known to cause crashes with some hardware.
-blacklist hw_random
-
-# The kernel lists this as "experimental", but for now it's "broken"
-blacklist via-ircc
-
-# ALSA modules to support sound modems.  These should be loaded manually
-# if needed.  For most people they just break sound support...
-blacklist snd-atiixp-modem
-blacklist snd-intel8x0m
-blacklist snd-via82xx-modem
-
-# OSS (Open Sound System) modules.  This is the old and deprecated Linux
-# sound system.  If you want to use OSS, remove the alsa-driver package
-# and cut out (or comment out) this list.  With these modules
-# blacklisted ALSA will load by default.
-blacklist ac97
-blacklist ac97_codec
-blacklist aci
-blacklist ad1816
-blacklist ad1848
-blacklist ad1889
-blacklist adlib_card
-blacklist aedsp16
-blacklist ali5455
-blacklist awe_wave
-blacklist btaudio
-blacklist cmpci
-blacklist cs4232
-blacklist cs4281
-blacklist cs46xx
-blacklist emu10k1
-blacklist es1370
-blacklist es1371
-blacklist esssolo1
-blacklist forte
-blacklist gus
-blacklist i810_audio
-blacklist kahlua
-blacklist mad16
-blacklist maestro
-blacklist maestro3
-blacklist maui
-blacklist mpu401
-blacklist msnd
-blacklist msnd_classic
-blacklist msnd_pinnacle
-blacklist nm256_audio
-blacklist opl3
-blacklist opl3sa
-blacklist opl3sa2
-blacklist pas2
-blacklist pss
-blacklist rme96xx
-blacklist sb
-blacklist sb_lib
-blacklist sgalaxy
-blacklist sonicvibes
-blacklist sound
-blacklist sscape
-blacklist trident
-blacklist trix
-blacklist uart401
-blacklist uart6850
-blacklist v_midi
-blacklist via82cxxx_audio
-blacklist wavefront
-blacklist ymfpci
-
-# Hardware specific video framebuffer modules.  If the user wants
-# these, they can load them manually or de-blacklist them.  Having
-# them load automatically may lead to funny side effects with
-# certain revisions of video hardware.
-blacklist arcfb
-blacklist aty128fb
-blacklist atyfb
-blacklist cirrusfb
-blacklist clgenfb
-blacklist cyber2000fb
-blacklist fbcon-cfb2
-blacklist fbcon-cfb4
-blacklist fbcon-hga
-blacklist fbcon-mfb
-blacklist fbcon-vga-planes
-blacklist fbgen
-blacklist hgafb
-blacklist i2c-matroxfb
-blacklist i810fb
-blacklist intelfb
-blacklist kyrofb
-blacklist matroxfb_DAC1064
-blacklist matroxfb_Ti3026
-blacklist matroxfb_accel
-blacklist matroxfb_base
-blacklist matroxfb_crtc2
-blacklist matroxfb_g450
-blacklist matroxfb_maven
-blacklist matroxfb_misc
-blacklist neofb
-blacklist nvidiafb
-blacklist pm2fb
-blacklist pm3fb
-blacklist radeonfb
-blacklist rivafb
-blacklist savagefb
-blacklist sisfb
-blacklist sstfb
-blacklist tdfxfb
-blacklist tridentfb
-blacklist vga16fb
-
-# SCSI and SATA controller modules.  Typically these are either
-# built into the kernel or loaded with an initrd already.
-blacklist 3w-xxxx
-blacklist 53c7,8xx
-blacklist AM53C974
-blacklist BusLogic
-blacklist NCR53c406a
-blacklist a100u2w
-blacklist advansys
-blacklist aha152x
-blacklist aha1542
-blacklist aha1740
-blacklist aic79xx
-blacklist aic7xxx
-blacklist aic7xxx_old
-blacklist aic94xx
-blacklist ata_piix
-blacklist atp870u
-blacklist cpqfc
-blacklist dc395x
-blacklist dmx3191d
-blacklist dpt_i2o
-blacklist dtc
-blacklist eata
-blacklist eata_dma
-blacklist eata_pio
-blacklist fdomain
-blacklist g_NCR5380
-blacklist g_NCR5380_mmio
-blacklist gdth
-blacklist ide-scsi
-blacklist imm
-blacklist in2000
-blacklist initio
-blacklist ipr
-blacklist ips
-blacklist libata
-blacklist megaraid
-blacklist ncr53c8xx
-blacklist nsp32
-blacklist osst
-blacklist pas16
-blacklist pci2000
-blacklist pci2220i
-blacklist ppa
-blacklist psi240i
-blacklist qla1280
-blacklist qla2100
-blacklist qla2200
-blacklist qla2300
-blacklist qla2322
-blacklist qla2xxx
-blacklist qla6312
-blacklist qla6322
-blacklist qlogicfas
-blacklist qlogicfas408
-blacklist qlogicfc
-blacklist qlogicisp
-blacklist seagate
-blacklist sim710
-blacklist sata_promise
-blacklist sata_sil
-blacklist sata_sis
-blacklist sata_svw
-blacklist sata_sx4
-blacklist sata_via
-blacklist sata_vsc
-blacklist scsi_debug
-blacklist scsi_transport_fc
-blacklist scsi_transport_spi
-blacklist sym53c416
-blacklist sym53c8xx
-blacklist sym53c8xx
-blacklist t128
-blacklist tmscsim
-blacklist u14-34f
-
-# Blacklist all watchdog modules. Many motherboards hangs with them and,
-# if you really need an watchdog you probably know how to load the module 
-blacklist acquirewdt
-blacklist advantechwdt
-blacklist alim1535_wdt
-blacklist alim7101_wdt
-blacklist cpu5wdt
-blacklist eurotechwdt
-blacklist hpwdt
-blacklist i6300esb
-blacklist iTCO_vendor_support
-blacklist iTCO_wdt
-blacklist ib700wdt
-blacklist ibmasr
-blacklist it8712f_wdt
-blacklist machzwd
-blacklist mixcomwd
-blacklist pc87413_wdt
-blacklist pcwd
-blacklist pcwd_pci
-blacklist pcwd_usb
-blacklist sbc60xxwdt
-blacklist sbc7240_wdt
-blacklist sbc8360
-blacklist sbc_epx_c3
-blacklist sc1200wdt
-blacklist sc520_wdt
-blacklist scx200_wdt
-blacklist smsc37b787_wdt
-blacklist softdog
-blacklist w83627hf_wdt
-blacklist w83697hf_wdt
-blacklist w83877f_wdt
-blacklist w83977f_wdt
-blacklist wafer5823wdt
-blacklist wdt
-blacklist wdt_pci
-
diff --git a/source/a/udev/config/modprobe.d/eepro100.conf b/source/a/udev/config/modprobe.d/eepro100.conf
new file mode 100644
index 00000000..a7ca4aae
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/eepro100.conf
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate Intel EtherExpress Pro/100 support driver.  List it
+# here so it won't conflict with an already-loaded e100 module.
+blacklist eepro100
+
diff --git a/source/a/udev/config/modprobe.d/eth1394.conf b/source/a/udev/config/modprobe.d/eth1394.conf
new file mode 100644
index 00000000..a2f475af
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/eth1394.conf
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Ethernet over IEEE1394 module.  In too many cases this will load
+# when there's no eth1394 device present (just an IEEE1394 port)
+blacklist eth1394
+
diff --git a/source/a/udev/config/modprobe.d/evbug.conf b/source/a/udev/config/modprobe.d/evbug.conf
new file mode 100644
index 00000000..0af0a83c
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/evbug.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+#evbug is a debug tool and should be loaded explicitly
+blacklist evbug
+
diff --git a/source/a/udev/config/modprobe.d/framebuffers.conf b/source/a/udev/config/modprobe.d/framebuffers.conf
new file mode 100644
index 00000000..770ce420
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/framebuffers.conf
@@ -0,0 +1,48 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Hardware specific video framebuffer modules.  If the user wants
+# these, they can load them manually or de-blacklist them.  Having
+# them load automatically may lead to funny side effects with
+# certain revisions of video hardware.
+blacklist arcfb
+blacklist aty128fb
+blacklist atyfb
+blacklist cirrusfb
+blacklist clgenfb
+blacklist cyber2000fb
+blacklist fbcon-cfb2
+blacklist fbcon-cfb4
+blacklist fbcon-hga
+blacklist fbcon-mfb
+blacklist fbcon-vga-planes
+blacklist fbgen
+blacklist hgafb
+blacklist i2c-matroxfb
+blacklist i810fb
+blacklist intelfb
+blacklist kyrofb
+blacklist matroxfb_DAC1064
+blacklist matroxfb_Ti3026
+blacklist matroxfb_accel
+blacklist matroxfb_base
+blacklist matroxfb_crtc2
+blacklist matroxfb_g450
+blacklist matroxfb_maven
+blacklist matroxfb_misc
+blacklist neofb
+blacklist nvidiafb
+blacklist pm2fb
+blacklist pm3fb
+blacklist radeonfb
+blacklist rivafb
+blacklist savagefb
+blacklist sisfb
+blacklist sstfb
+blacklist tdfxfb
+blacklist tridentfb
+blacklist vga16fb
+blacklist viafb
+blacklist virgefb
+
diff --git a/source/a/udev/config/modprobe.d/hostap.conf b/source/a/udev/config/modprobe.d/hostap.conf
new file mode 100644
index 00000000..4254d3da
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/hostap.conf
@@ -0,0 +1,12 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Modules used to run a wireless adapter as an access point.  These
+# conflict with the normal driver for the device, and so should be
+# loaded manually.
+blacklist hostap_cs
+blacklist hostap_pci
+blacklist hostap_plx
+blacklist hostap
+
diff --git a/source/a/udev/config/modprobe.d/hw_random.conf b/source/a/udev/config/modprobe.d/hw_random.conf
new file mode 100644
index 00000000..b912e012
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/hw_random.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# This module has also been known to cause crashes with some hardware.
+blacklist hw_random
+
diff --git a/source/a/udev/config/modprobe.d/isapnp.conf b/source/a/udev/config/modprobe.d/isapnp.conf
new file mode 100644
index 00000000..a89ad6bb
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/isapnp.conf
@@ -0,0 +1,24 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These aliases are here because many PnP modules do not provide them.
+#
+# NOTE:  Commented out due to noise pollution from udev.
+# In the unlikely event that your machine needs these aliases, copy this
+# file to /etc/modprobe.d/isapnp.conf and uncomment them there.
+
+#alias pnp:dPNP0400 parport_pc
+#alias pnp:dPNP0401 parport_pc
+#alias pnp:dPNP0510 irtty-sir
+#alias pnp:dPNP0511 irtty-sir
+#alias pnp:dPNP0700 floppy
+#alias pnp:dPNP0B00 rtc
+#alias acpi:PNP0B00: rtc-cmos
+#alias acpi:PNP0B01: rtc-cmos
+#alias acpi:PNP0B02: rtc-cmos
+#alias pnp:dPNPB02F analog
+#alias pnp:dPNP0F13 psmouse
+#alias pnp:dPNP0800 pcspkr
+#alias pnp:dPNP0303 atkbd
+
diff --git a/source/a/udev/config/modprobe.d/isapnp.conf.new b/source/a/udev/config/modprobe.d/isapnp.conf.new
deleted file mode 100644
index 2ed9305e..00000000
--- a/source/a/udev/config/modprobe.d/isapnp.conf.new
+++ /dev/null
@@ -1,15 +0,0 @@
-# These aliases are here because many PnP modules do not
-# provide aliases for them.
-alias pnp:dPNP0400 parport_pc
-alias pnp:dPNP0401 parport_pc
-alias pnp:dPNP0510 irtty-sir
-alias pnp:dPNP0511 irtty-sir
-alias pnp:dPNP0700 floppy
-alias pnp:dPNP0B00 rtc
-alias acpi:PNP0B00: rtc-cmos
-alias acpi:PNP0B01: rtc-cmos
-alias acpi:PNP0B02: rtc-cmos
-alias pnp:dPNPB02F analog
-alias pnp:dPNP0F13 psmouse
-alias pnp:dPNP0800 pcspkr
-alias pnp:dPNP0303 atkbd
diff --git a/source/a/udev/config/modprobe.d/isdn.conf b/source/a/udev/config/modprobe.d/isdn.conf
new file mode 100644
index 00000000..7f736753
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/isdn.conf
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These two come from the hwdata project
+# Bug numbers are Fedora/RH specific
+
+# ISDN - see bugs 154799, 159068
+blacklist hisax
+blacklist hisax_fcpcipnp
+
diff --git a/source/a/udev/config/modprobe.d/oss.conf b/source/a/udev/config/modprobe.d/oss.conf
new file mode 100644
index 00000000..52ed2f59
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/oss.conf
@@ -0,0 +1,61 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# OSS (Open Sound System) modules.  This is the old and deprecated Linux
+# sound system.  If you want to use OSS, remove the alsa-driver package
+# and cut out (or comment out) this list.  With these modules
+# blacklisted ALSA will load by default.
+blacklist ac97
+blacklist ac97_codec
+blacklist aci
+blacklist ad1816
+blacklist ad1848
+blacklist ad1889
+blacklist adlib_card
+blacklist aedsp16
+blacklist ali5455
+blacklist awe_wave
+blacklist btaudio
+blacklist cmpci
+blacklist cs4232
+blacklist cs4281
+blacklist cs46xx
+blacklist emu10k1
+blacklist es1370
+blacklist es1371
+blacklist esssolo1
+blacklist forte
+blacklist gus
+blacklist i810_audio
+blacklist kahlua
+blacklist mad16
+blacklist maestro
+blacklist maestro3
+blacklist maui
+blacklist mpu401
+blacklist msnd
+blacklist msnd_classic
+blacklist msnd_pinnacle
+blacklist nm256_audio
+blacklist opl3
+blacklist opl3sa
+blacklist opl3sa2
+blacklist pas2
+blacklist pss
+blacklist rme96xx
+blacklist sb
+blacklist sb_lib
+blacklist sgalaxy
+blacklist sonicvibes
+blacklist sound
+blacklist sscape
+blacklist trident
+blacklist trix
+blacklist uart401
+blacklist uart6850
+blacklist v_midi
+blacklist via82cxxx_audio
+blacklist wavefront
+blacklist ymfpci
+
diff --git a/source/a/udev/config/modprobe.d/pcspkr.conf b/source/a/udev/config/modprobe.d/pcspkr.conf
new file mode 100644
index 00000000..66de6b74
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/pcspkr.conf
@@ -0,0 +1,9 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# PC Speaker support:
+# This one is loaded by /etc/rc.d/rc.modules. If you don't like
+# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules.
+blacklist pcspkr
+
diff --git a/source/a/udev/config/modprobe.d/psmouse.conf b/source/a/udev/config/modprobe.d/psmouse.conf
new file mode 100644
index 00000000..cc414141
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/psmouse.conf
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# PS/2 mouse support:
+# The default options when the psmouse module can cause problems with KVM
+# switches.  If you experience this, you may want to uncomment the line
+# below to use a more basic mouse protocol with the psmouse module:
+#options psmouse proto=imps
+
diff --git a/source/a/udev/config/modprobe.d/psmouse.conf.new b/source/a/udev/config/modprobe.d/psmouse.conf.new
deleted file mode 100644
index 70c0d819..00000000
--- a/source/a/udev/config/modprobe.d/psmouse.conf.new
+++ /dev/null
@@ -1,6 +0,0 @@
-# PS/2 mouse support:
-# The default options when the psmouse module can cause problems with KVM
-# switches.  If you experience this, you may want to uncomment the line
-# below to use a more basic mouse protocol with the psmouse module:
-#options psmouse proto=imps
-
diff --git a/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf b/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf
new file mode 100644
index 00000000..61470416
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf
@@ -0,0 +1,81 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# SCSI and SATA controller modules.  Typically these are either
+# built into the kernel or loaded with an initrd already.
+blacklist 3w-xxxx
+blacklist 53c7,8xx
+blacklist AM53C974
+blacklist BusLogic
+blacklist NCR53c406a
+blacklist a100u2w
+blacklist advansys
+blacklist aha152x
+blacklist aha1542
+blacklist aha1740
+blacklist aic79xx
+blacklist aic7xxx
+blacklist aic7xxx_old
+blacklist aic94xx
+blacklist ata_piix
+blacklist atp870u
+blacklist cpqfc
+blacklist dc395x
+blacklist dmx3191d
+blacklist dpt_i2o
+blacklist dtc
+blacklist eata
+blacklist eata_dma
+blacklist eata_pio
+blacklist fdomain
+blacklist g_NCR5380
+blacklist g_NCR5380_mmio
+blacklist gdth
+blacklist ide-scsi
+blacklist imm
+blacklist in2000
+blacklist initio
+blacklist ipr
+blacklist ips
+blacklist libata
+blacklist megaraid
+blacklist ncr53c8xx
+blacklist nsp32
+blacklist osst
+blacklist pas16
+blacklist pci2000
+blacklist pci2220i
+blacklist ppa
+blacklist psi240i
+blacklist qla1280
+blacklist qla2100
+blacklist qla2200
+blacklist qla2300
+blacklist qla2322
+blacklist qla2xxx
+blacklist qla6312
+blacklist qla6322
+blacklist qlogicfas
+blacklist qlogicfas408
+blacklist qlogicfc
+blacklist qlogicisp
+blacklist seagate
+blacklist sim710
+blacklist sata_promise
+blacklist sata_sil
+blacklist sata_sis
+blacklist sata_svw
+blacklist sata_sx4
+blacklist sata_via
+blacklist sata_vsc
+blacklist scsi_debug
+blacklist scsi_transport_fc
+blacklist scsi_transport_spi
+blacklist sym53c416
+blacklist sym53c8xx
+blacklist sym53c8xx
+blacklist t128
+blacklist tmscsim
+blacklist u14-34f
+
diff --git a/source/a/udev/config/modprobe.d/sound-modems.conf b/source/a/udev/config/modprobe.d/sound-modems.conf
new file mode 100644
index 00000000..f458346d
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/sound-modems.conf
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# ALSA modules to support sound modems.  These should be loaded manually
+# if needed.  For most people they just break sound support...
+blacklist snd-atiixp-modem
+blacklist snd-intel8x0m
+blacklist snd-via82xx-modem
+
diff --git a/source/a/udev/config/modprobe.d/tulip.conf b/source/a/udev/config/modprobe.d/tulip.conf
new file mode 100644
index 00000000..64b6a5ca
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/tulip.conf
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
+blacklist de4x5
+
+# At least 2.4.3 and later xircom_tulip doesn't have that conflict
+# xircom_tulip_cb
+blacklist dmfe
+
diff --git a/source/a/udev/config/modprobe.d/usb-controller.conf b/source/a/udev/config/modprobe.d/usb-controller.conf
new file mode 100644
index 00000000..f5e4e502
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/usb-controller.conf
@@ -0,0 +1,9 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The EHCI driver should be loaded before the ones for low speed controllers
+# or some devices may be confused when they are disconnected and reconnected.
+softdep uhci-hcd pre: ehci-hcd
+softdep ohci-hcd pre: ehci-hcd
+
diff --git a/source/a/udev/config/modprobe.d/usb-controller.conf.new b/source/a/udev/config/modprobe.d/usb-controller.conf.new
deleted file mode 100644
index 4b77fd82..00000000
--- a/source/a/udev/config/modprobe.d/usb-controller.conf.new
+++ /dev/null
@@ -1,4 +0,0 @@
-# Make sure that ehci-hcd is always loaded before uhci-hci
-# # or ohci-hcd to prevent a kernel warning:
-install uhci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i uhci-hcd
-install ohci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i ohci-hcd
diff --git a/source/a/udev/config/modprobe.d/via-ircc.conf b/source/a/udev/config/modprobe.d/via-ircc.conf
new file mode 100644
index 00000000..3dfa5731
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/via-ircc.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The kernel lists this as "experimental", but for now it's "broken"
+blacklist via-ircc
+
diff --git a/source/a/udev/config/modprobe.d/watchdog.conf b/source/a/udev/config/modprobe.d/watchdog.conf
new file mode 100644
index 00000000..66d1f837
--- /dev/null
+++ b/source/a/udev/config/modprobe.d/watchdog.conf
@@ -0,0 +1,43 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Blacklist all watchdog modules. Many motherboards hang with them, and
+# if you really need a watchdog, you probably know how to load the module 
+blacklist acquirewdt
+blacklist advantechwdt
+blacklist alim1535_wdt
+blacklist alim7101_wdt
+blacklist cpu5wdt
+blacklist eurotechwdt
+blacklist hpwdt
+blacklist i6300esb
+blacklist i8xx_tco
+blacklist iTCO_vendor_support
+blacklist iTCO_wdt
+blacklist ib700wdt
+blacklist ibmasr
+blacklist it8712f_wdt
+blacklist machzwd
+blacklist mixcomwd
+blacklist pc87413_wdt
+blacklist pcwd
+blacklist pcwd_pci
+blacklist pcwd_usb
+blacklist sbc60xxwdt
+blacklist sbc7240_wdt
+blacklist sbc8360
+blacklist sbc_epx_c3
+blacklist sc1200wdt
+blacklist sc520_wdt
+blacklist scx200_wdt
+blacklist smsc37b787_wdt
+blacklist softdog
+blacklist w83627hf_wdt
+blacklist w83697hf_wdt
+blacklist w83877f_wdt
+blacklist w83977f_wdt
+blacklist wafer5823wdt
+blacklist wdt
+blacklist wdt_pci
+
diff --git a/source/a/udev/config/rc.d/rc.udev.new b/source/a/udev/config/rc.d/rc.udev.new
index 6a6218f6..2bbd9819 100644
--- a/source/a/udev/config/rc.d/rc.udev.new
+++ b/source/a/udev/config/rc.d/rc.udev.new
@@ -4,7 +4,6 @@
 # appropriate kernel modules, and configures the devices.
 
 PATH="/sbin:/bin"
-OPT=""
 
 . /etc/udev/udev.conf
 
@@ -25,26 +24,38 @@ mount_devpts() {
 
 case "$1" in
     start)
-	# Sanity check #1, udev requires that the kernel support tmpfs:
+        # Sanity check #1, udev requires that the kernel support devtmpfs:
+        if ! grep -wq devtmpfs /proc/filesystems ; then
+          echo "Sorry, but you need devtmpfs support in the kernel to use udev."
+          echo "Both of these options are needed:  CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y"
+          echo
+          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
+          exit 1
+        fi
+
+	# Sanity check #2, udev requires that the kernel support tmpfs:
         if ! grep -wq tmpfs /proc/filesystems ; then
           echo "Sorry, but you need tmpfs support in the kernel to use udev."
           echo
           echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
           exit 1
         fi
 
-        # Sanity check #2, make sure that a 2.6.x kernel is new enough:
+        # Sanity check #3, make sure that a 2.6.x kernel is new enough:
         if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then
           if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then
             echo "Sorry, but you need a 2.6.32+ kernel to use this udev."
             echo "Your kernel version is only $(uname -r)."
             echo
             echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+            sleep 10
             exit 1
           fi
         fi
 
-        # Sanity check #3, make sure the udev package was not removed.  If udevd
+        # Sanity check #4, make sure the udev package was not removed.  If udevd
         # is not there, this will also shut off this script to prevent further
         # problems:
         if [ ! -x /sbin/udevd ]; then
@@ -52,6 +63,7 @@ case "$1" in
           echo "No udevd daemon found."
           echo "Turning off udev:  chmod 644 /etc/rc.d/rc.udev"
           echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
           exit 1
         fi
 
@@ -90,47 +102,41 @@ case "$1" in
 	# Mount devpts
 	mount_devpts
 
-	# Start udevd.
-	/sbin/udevd --daemon 2>/dev/null
-
-	# If udevd was already running, then it will return !=0 exit code,
-	# so we'll try to re-run failed events
-	if [ $? != 0 ]; then
-          OPT="--type=failed $OPT"
-          ( cd ${UDEV_ROOT}/.udev
-            for TMPFILE in tmp-rules-*.rules ; do
-              mv $TMPFILE /etc/udev/rules.d/${TMPFILE/tmp-rules--/} 2>/dev/null
-            done
-          )
-	else	# udev is just now being started, so we'll do some initial setup:
-
-	  # Create rootdev rules
-	  DEVICENUMBER=$( /bin/stat -c %d / )
-	  MAJORNUMBER=$(($DEVICENUMBER / 256))
-	  MINORNUMBER=$(($DEVICENUMBER % 256))
-
-	  echo 'ACTION!="remove", SUBSYSTEM=="block", ENV{MAJOR}=="'$MAJORNUMBER'", ENV{MINOR}=="'$MINORNUMBER'", SYMLINK+="root"' > /dev/.udev/rules.d/61-dev-root-link.rules
-
-	  # Set OPT="--action=add" to generate add events on coldplug
-	  OPT="--action=add"
-
-	fi
-
-	echo "Triggering udev events:  /sbin/udevadm trigger $OPT"	
-	# Call udevtrigger and udevsettle to do the device configuration:
-	/sbin/udevadm trigger $OPT && /sbin/udevadm settle --timeout=120
-
-	;;
+        if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd
+          echo "Starting udevd:  /sbin/udevd --daemon"
+          /sbin/udevd --daemon
+          # Since udev is just now being started we want to use add events:
+          echo "Triggering udev events:  /sbin/udevadm trigger --action=add"
+          # Call udevtrigger and udevsettle to do the device configuration:
+          /sbin/udevadm trigger --type=subsystems --action=add
+          /sbin/udevadm trigger --type=devices --action=add
+        else # trigger changes for already running udevd
+          # If the persistent rules files do not exist, trigger an add event:
+          if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then
+            # Test that we can actually write to the directory first:
+            if touch /etc/udev/rules.d/testfile 2> /dev/null ; then
+              rm -f /etc/udev/rules.d/testfile
+              # This should add persistent net/cd rules:
+              echo "Triggering udev to write persistent rules to /etc/udev/rules.d/"
+              /sbin/udevadm trigger --type=devices --action=add
+              sleep 3
+            fi
+          fi
+          # Since udevd is running, most of the time we only need change events:
+          echo "Triggering udev events:  /sbin/udevadm trigger --action=change"
+          /sbin/udevadm trigger --type=subsystems --action=change
+          /sbin/udevadm trigger --type=devices --action=change
+        fi
+        /sbin/udevadm settle --timeout=120
+        ;;
     stop)
 	echo "Stopping udevd is STRONGLY discouraged and not supported."
 	echo "If you are sure you want to do this, use 'force-stop' instead."
 	;;
     force-stop)
 	echo "Stopping udevd"
-        if [ -e /proc/sys/kernel/hotplug ]; then
-          echo /sbin/hotplug > /proc/sys/kernel/hotplug
-        fi
-	killall udevd 
+	udevadm control --exit
+	killall udevd 2>/dev/null
 	;;
     restart)
 	echo "Restarting udevd is STRONGLY discouraged and not supported."
@@ -138,18 +144,18 @@ case "$1" in
 	;;
     force-restart)
 	echo "Restarting udevd"
-	killall udevd
-	sleep 5
+	udevadm control --exit
+	sleep 3
 	udevd --daemon
 	;;
     reload)
 	echo "Reloading udev rules"
-	udevadm control --reload-rules
+	udevadm control --reload
 	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
 	;;
     force-reload)
 	echo "Updating all available device nodes in $UDEV_ROOT"
-	udevadm control --reload-rules
+	udevadm control --reload
 	rm -rf $UDEV_ROOT/.udev $UDEV_ROOT/disk
 	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
 	;;
diff --git a/source/a/udev/config/rules.d/40-slackware.rules b/source/a/udev/config/rules.d/40-slackware.rules
index 6883f526..9e8c6342 100644
--- a/source/a/udev/config/rules.d/40-slackware.rules
+++ b/source/a/udev/config/rules.d/40-slackware.rules
@@ -17,3 +17,6 @@ KERNEL=="mice",		SYMLINK+="mouse"
 # Set rfkill device writable by netdev group
 KERNEL=="rfkill", GROUP:="netdev", MODE:="0664"
 
+# Mount fusectl filesystem
+KERNEL=="fuse", ACTION=="add", RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections"
+
diff --git a/source/a/udev/config/rules.d/90-network.rules b/source/a/udev/config/rules.d/90-network.rules
deleted file mode 100644
index 03f2ddc7..00000000
--- a/source/a/udev/config/rules.d/90-network.rules
+++ /dev/null
@@ -1,5 +0,0 @@
-# This file will be overwritten in next upgrade.  Please put your
-# custom rules somewhere else (90-local.rules is a good idea)
-
-SUBSYSTEM=="net", NAME=="?*", ACTION=="add", RUN+="nethelper.sh $env{INTERFACE} start"
-SUBSYSTEM=="net", NAME=="?*", ACTION=="remove", RUN+="nethelper.sh $env{INTERFACE} stop"
diff --git a/source/a/udev/config/scripts/nethelper.sh b/source/a/udev/config/scripts/nethelper.sh
deleted file mode 100755
index 9e172027..00000000
--- a/source/a/udev/config/scripts/nethelper.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-DEVNAME="$1"
-COMMAND="$2"
-
-testwrite() { 
-	if touch /var/run/checkrw 2>/dev/null ; then
-		rm -rf /var/run/checkrw 
-		RW=1
-	fi
-}
-
-case $DEVNAME in
-	eth*|ath*|wlan*|ra*|sta*|ctc*|lcs*|hsi*)
-		case $COMMAND in
-			'start')
-				testwrite
-
-				if [ $RW ]; then
-					if [ -x /etc/rc.d/rc.inet1 ]; then
-						if ! /sbin/ifconfig | /bin/grep -q "^${DEVNAME} "; then
-							/etc/rc.d/rc.inet1 ${DEVNAME}_start
-						fi
-					fi
-					exit 0
-				else
-					exit 1
-				fi
-				;;
-			'stop')
-	                        if [ -x /etc/rc.d/rc.inet1 ]; then
-                                     if /sbin/ifconfig | /bin/grep -q "^${DEVNAME} "; then
-                                        /etc/rc.d/rc.inet1 ${DEVNAME}_stop
-                                     fi
-                                fi
-                                # Does dhcpcd appear to still be running on the
-				# interface?  If so, try to stop it.
-                                if [ -r /etc/dhcpc/dhcpcd-$DEVNAME.pid -o -r /var/run/dhcpcd-$DEVNAME.pid ]; then
-                                  /sbin/dhcpcd -k -d $DEVNAME
-                                  # Force garbage removal, if needed:
-                                  if [ -r /etc/dhcpc/dhcpcd-$DEVNAME.pid ]; then
-                                     /bin/rm -f /etc/dhcpc/dhcpcd-$DEVNAME.pid
-                                  elif [ -r /var/run/dhcpcd-$DEVNAME.pid ]; then
-                                     /bin/rm -f /var/run/dhcpcd-$DEVNAME.pid
-                                  fi
-                                fi
-                                # If the interface is now down, exit with a status of 0:
-                                if /sbin/ifconfig | /bin/grep -q "^${DEVNAME} " ; then
-                                  exit 0
-                                fi
-                                ;;
-			*)
-				echo "usage $0 interface start|stop"
-				exit 1
-				;;
-		esac
-	;;
-	*)
-		echo "Interface $DEVNAME not supported."
-		exit 1
-	;;
-esac
-exit 0
diff --git a/source/a/udev/doinst.sh b/source/a/udev/doinst.sh
index 5b7f5f90..2912e5c8 100644
--- a/source/a/udev/doinst.sh
+++ b/source/a/udev/doinst.sh
@@ -25,17 +25,12 @@ fi
 # This should catch *all* files in /etc/modprobe.d/ and move them over to
 # have .conf extensions
 for modfile in $(ls etc/modprobe.d/ | grep -v "\.\(conf\|bak\|orig\|new\)"); do
-  if [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then
+  if [ "$modfile" = README ]; then
+    true # do nothing
+  elif [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then
     mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.conf
   elif [ -e etc/modprobe.d/$modfile -a -e etc/modprobe.d/$modfile.conf ]; then
     mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.bak
   fi
 done
 
-config etc/modprobe.d/blacklist.conf.new
-config etc/modprobe.d/isapnp.conf.new
-config etc/modprobe.d/psmouse.conf.new
-config etc/modprobe.d/usb-controller.conf.new
-
-/sbin/udevadm info --convert-db 1>/dev/null 2>/dev/null
-
diff --git a/source/a/udev/fix-42-usb-hid-pm.rules.diff b/source/a/udev/fix-42-usb-hid-pm.rules.diff
new file mode 100644
index 00000000..2a1d529f
--- /dev/null
+++ b/source/a/udev/fix-42-usb-hid-pm.rules.diff
@@ -0,0 +1,18 @@
+diff -u -r --new-file udev-182.orig/rules/42-usb-hid-pm.rules udev-182/rules/42-usb-hid-pm.rules
+--- udev-182.orig/rules/42-usb-hid-pm.rules	2012-03-12 16:40:40.569534100 -0500
++++ udev-182/rules/42-usb-hid-pm.rules	2012-09-10 13:36:44.171054934 -0500
+@@ -43,7 +43,13 @@
+ ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto"
+ 
+ # Raritan Computer, Inc KVM.
+-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}="0002", TEST=="power/control", ATTR{power/control}="auto"
++ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}=="0002", TEST=="power/control", ATTR{power/control}="auto"
+ 
+ # USB HID devices that are internal to the machine should also be safe to autosuspend
++
++ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="removable", GOTO="usb_hid_pm_end"
++ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="unknown", GOTO="usb_hid_pm_end"        
++
+ ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto"
++
++LABEL="usb_hid_pm_end"
diff --git a/source/a/udev/rule_generator.diff b/source/a/udev/rule_generator.diff
index 212c09f1..25c72b84 100644
--- a/source/a/udev/rule_generator.diff
+++ b/source/a/udev/rule_generator.diff
@@ -1,6 +1,6 @@
-diff -Nur udev-159.orig//extras/rule_generator/write_cd_rules udev-159/extras/rule_generator/write_cd_rules
---- udev-159.orig//extras/rule_generator/write_cd_rules	2010-06-25 04:37:36.000000000 -0500
-+++ udev-159/extras/rule_generator/write_cd_rules	2010-07-07 02:44:14.501947041 -0500
+diff -Nur udev-182.orig/src/rule_generator/write_cd_rules udev-182/src/rule_generator/write_cd_rules
+--- udev-182.orig/src/rule_generator/write_cd_rules	2012-03-24 22:47:53.138527732 -0500
++++ udev-182/src/rule_generator/write_cd_rules	2012-03-24 22:59:42.595889830 -0500
 @@ -3,7 +3,8 @@
  # This script is run if an optical drive lacks a rule for persistent naming.
  #
@@ -21,58 +21,58 @@ diff -Nur udev-159.orig//extras/rule_generator/write_cd_rules udev-159/extras/ru
  
  comment="$ID_MODEL ($ID_PATH)"
 -
- 	write_rule "$match" "cdrom$link_num" "$comment"
+         write_rule "$match" "cdrom$link_num" "$comment"
 -[ "$ID_CDROM_CD_R" -o "$ID_CDROM_CD_RW" ] && \
--	write_rule "$match" "cdrw$link_num"
+-        write_rule "$match" "cdrw$link_num"
 -[ "$ID_CDROM_DVD" ] && \
--	write_rule "$match" "dvd$link_num"
+-        write_rule "$match" "dvd$link_num"
 -[ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ] && \
--	write_rule "$match" "dvdrw$link_num"
-+	if [ "$(find_all_rules 'SYMLINK+=' cdrom)" = "" ]; then
-+		write_rule "$match" "cdrom"
-+	fi
+-        write_rule "$match" "dvdrw$link_num"
++        if [ "$(find_all_rules 'SYMLINK+=' cdrom)" = "" ]; then
++                write_rule "$match" "cdrom"
++        fi
 +
-+	if [ "$ID_CDROM_CD_R" ]; then
-+	       	write_rule "$match" "cdr$link_num"
-+		if [ "$(find_all_rules 'SYMLINK+=' cdr)" = "" ]; then
-+			write_rule "$match" "cdr"
-+		fi
++        if [ "$ID_CDROM_CD_R" ]; then
++                       write_rule "$match" "cdr$link_num"
++                if [ "$(find_all_rules 'SYMLINK+=' cdr)" = "" ]; then
++                        write_rule "$match" "cdr"
++                fi
 +
-+		write_rule "$match" "cdwriter$link_num"
-+		if [ "$(find_all_rules 'SYMLINK+=' cdwriter)" = "" ]; then
-+			write_rule "$match" "cdwriter"
-+		fi
++                write_rule "$match" "cdwriter$link_num"
++                if [ "$(find_all_rules 'SYMLINK+=' cdwriter)" = "" ]; then
++                        write_rule "$match" "cdwriter"
++                fi
 +
-+		if [ "$ID_CDROM_CD_RW" ]; then
-+			write_rule "$match" "cdrw$link_num"
-+			if [ "$(find_all_rules 'SYMLINK+=' cdrw)" = "" ]; then
-+				write_rule "$match" "cdrw"
-+			fi
-+		fi
++                if [ "$ID_CDROM_CD_RW" ]; then
++                        write_rule "$match" "cdrw$link_num"
++                        if [ "$(find_all_rules 'SYMLINK+=' cdrw)" = "" ]; then
++                                write_rule "$match" "cdrw"
++                        fi
++                fi
 +
-+		if [ "$(find_all_rules 'SYMLINK+=' writer)" = "" ]; then
-+			write_rule "$match" "writer"
-+		fi
-+	fi
++                if [ "$(find_all_rules 'SYMLINK+=' writer)" = "" ]; then
++                        write_rule "$match" "writer"
++                fi
++        fi
 +
-+	if [  "$ID_CDROM_DVD" ]; then
-+		write_rule "$match" "dvd$link_num"
-+		if [ "$(find_all_rules 'SYMLINK+=' dvd)" = "" ]; then
-+			write_rule "$match" "dvd"
-+		fi
++        if [  "$ID_CDROM_DVD" ]; then
++                write_rule "$match" "dvd$link_num"
++                if [ "$(find_all_rules 'SYMLINK+=' dvd)" = "" ]; then
++                        write_rule "$match" "dvd"
++                fi
 +
-+		if [ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ]; then
-+			write_rule "$match" "dvdrw$link_num"
-+			if [ "$(find_all_rules 'SYMLINK+=' dvdrw)" = "" ]; then
-+				write_rule "$match" "dvdrw"
-+			fi
++                if [ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ]; then
++                        write_rule "$match" "dvdrw$link_num"
++                        if [ "$(find_all_rules 'SYMLINK+=' dvdrw)" = "" ]; then
++                                write_rule "$match" "dvdrw"
++                        fi
 +
-+			write_rule "$match" "dvdwriter$link_num"
-+			if [ "$(find_all_rules 'SYMLINK+=' dvdwriter)" = "" ]; then
-+				write_rule "$match" "dvdwriter"
-+			fi
-+		fi
-+	fi
++                        write_rule "$match" "dvdwriter$link_num"
++                        if [ "$(find_all_rules 'SYMLINK+=' dvdwriter)" = "" ]; then
++                                write_rule "$match" "dvdwriter"
++                        fi
++                fi
++        fi
  echo >> $RULES_FILE
  
  unlock_rules_file
diff --git a/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch b/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch
new file mode 100644
index 00000000..bfa0c76a
--- /dev/null
+++ b/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch
@@ -0,0 +1,27 @@
+Adapted from the following patch (path and actual line number changes):
+
+From daa9cf546ce7265645ced9592dd54c6b2fc04302 Mon Sep 17 00:00:00 2001
+From: Kay Sievers <kay@vrfy.org>
+Date: Thu, 5 Jul 2012 16:53:08 +0200
+Subject: [PATCH] udev: ata_id - fixup all 8 not only 6 bytes of the fw_rev
+ string
+
+The last two digits are in the wrong order:
+  $ hdparm -I /dev/sda | grep Revision
+  4PC10362
+
+  $ /lib/udev/ata_id -x /dev/sda | grep REVISION
+  4PC10326
+
+diff -Nur udev-182.orig/src/ata_id/ata_id.c udev-182/src/ata_id/ata_id.c
+--- udev-182.orig/src/ata_id/ata_id.c	2012-03-13 19:00:51.220734316 -0500
++++ udev-182/src/ata_id/ata_id.c	2012-07-14 19:48:34.224478831 -0500
+@@ -511,7 +511,7 @@
+                  * use and copy it into the hd_driveid struct for convenience
+                  */
+                 disk_identify_fixup_string (identify,  10, 20); /* serial */
+-                disk_identify_fixup_string (identify,  23,  6); /* fwrev */
++                disk_identify_fixup_string (identify,  23,  8); /* fwrev */
+                 disk_identify_fixup_string (identify,  27, 40); /* model */
+                 disk_identify_fixup_uint16 (identify,  0);      /* configuration */
+                 disk_identify_fixup_uint16 (identify,  75);     /* queue depth */
diff --git a/source/a/udev/udev.SlackBuild b/source/a/udev/udev.SlackBuild
index c6f83a0e..183c6667 100755
--- a/source/a/udev/udev.SlackBuild
+++ b/source/a/udev/udev.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-5}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -58,29 +58,35 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# So this is a major bug.  At least, it triggers one in the kernel.
-# We'll revert it for now.  If left in place, machines using ATA
-# (especially PATA) are liable to randomly crash on reboot.
-# The last little bit of this patch fails to reverse but it won't matter.
-if [ $VERSION = 165 ]; then
-  zcat $CWD/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch.gz | patch -p1 -R
-fi
+# Fix ata_id (remove with udev-186+)
+zcat $CWD/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz | patch -p1 || exit 1
+
+# Fix 42-usb-hid-pm.rules (remove with udev-187+)
+zcat $CWD/fix-42-usb-hid-pm.rules.diff.gz | patch -p1 --verbose || exit 1
 
 # Fixup the rule generator for our use
-zcat $CWD/rule_generator.diff.gz | patch -p1 || exit 1
+zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1
 
 # static libudev is needed for lvm2
+# --enable-udev_acl was removed (will be part of future CK release)
+# --enable-floppy support was also disabled by default in 173
+# --enable-rule_generator was disabled by default in 175
 ./configure \
-  --enable-static \
   --prefix=/usr \
-  --sysconfdir=/etc \
-  --sbindir=/sbin \
+  --with-rootprefix=/ \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --with-rootlibdir=/lib${LIBDIRSUFFIX} \
-  --libexecdir=/lib/udev \
-  --disable-introspection \
+  --with-firmware-path=/lib/firmware/updates:/lib/firmware \
+  --sysconfdir=/etc \
+  --bindir=/sbin \
+  --sbindir=/sbin \
+  --libexecdir=/lib \
+  --enable-introspection \
   --mandir=/usr/man \
   --docdir=/usr/doc/udev-$VERSION \
+  --enable-floppy \
+  --enable-static \
+  --enable-rule_generator \
   --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || make || exit 1
@@ -92,8 +98,13 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
 # scsi_id is needed by multipath
 ( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id )
 
+# Put udevd back in /sbin
+mv $PKG/lib/udev/udevd $PKG/sbin
+ln -s /sbin/udevd $PKG/lib/udev/udevd
+
 mkdir -p \
-  $PKG/etc/modprobe.d \
+  $PKG/run \
+  $PKG/{etc,lib}/modprobe.d \
   $PKG/etc/rc.d \
   $PKG/etc/udev/rules.d \
   $PKG/lib/firmware
@@ -106,32 +117,23 @@ cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/
 
 # Now the init script and module-init-tools stuff
 cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new
-cp -a $CWD/config/modprobe.d/* $PKG/etc/modprobe.d
+cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/
+cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/
 
-chown -R root:root $PKG/etc
-find $PKG/etc -type f -exec chmod 644 {} \;
+chown -R root:root $PKG/etc $PKG/lib/modprobe.d
+find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \;
 find $PKG/etc -type d -exec chmod 755 {} \;
 chmod 0755 $PKG/etc/rc.d/rc.udev.new
 
 # Add extra device nodes to the package that udev doesn't make:
-# As of 156, some of these aren't be needed any more:
-# removed core@  fd@  stderr@  stdin@  stdout@ 
 tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG
 
-# Add various helper scripts:
-for file in $CWD/config/scripts/* ; do
-  cp -a $file $PKG/lib/udev/
-done
 chown -R root:root $PKG/lib/udev
 chmod 0755 $PKG/lib/udev/*
 
-# Move the pkgconfig file to where we expect it
-mv $PKG/usr/share/pkgconfig/* $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
-rmdir $PKG/usr/share/pkgconfig
-
 mkdir -p $PKG/usr/doc/udev-$VERSION
 cp -a \
-  COPYING* README* TODO extras/keymap/README.keymap.txt \
+  COPYING* README* TODO \
   $PKG/usr/doc/udev-$VERSION
 
 # Don't package the API docs:
diff --git a/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch b/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch
deleted file mode 100644
index fc991b9a..00000000
--- a/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch
+++ /dev/null
@@ -1,305 +0,0 @@
-From 560de575148b7efda3b34a7f7073abd483c5f08e Mon Sep 17 00:00:00 2001
-From: David Zeuthen <davidz@redhat.com>
-Date: Thu, 4 Nov 2010 08:55:58 -0400
-Subject: [PATCH 1/1] Use ata_id, not scsi_id, on ATAPI devices
-
-The major benefit here, is that we get the ATAPI device serial
-number. With SCSI ID we didn't get this since it's not part of the
-SCSI INQUIRY command. Specifically this means that we get symlinks to
-empty optical drives, e.g.
-
- /dev/disk/by-id/ata-VBOX_CD-ROM_VB2-01700376
-
-which we didn't get earlier. So this is a major win.
-
-Also make ata_id work on CD-ROM devices when using /dev/bsg nodes so
-this works on both the scsi_device as well as the block device. We do
-this, basically, by issuing the ATA IDENTIFY PACKET DEVICE command
-instead of the ATA IDENTIFY command. We also use 16-byte pass-through
-ATA passthrough instead of 12-byte passthrough to avoid clashing with
-the MMC BLANK command.
-
-This means that we get this output
-
- # udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- E: UDEV_LOG=3
- E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- E: DEVTYPE=scsi_device
- E: DRIVER=sr
- E: MODALIAS=scsi:t-0x05
- E: SUBSYSTEM=scsi
- E: ID_ATA=1
- E: ID_TYPE=cd
- E: ID_BUS=ata
- E: ID_MODEL=VBOX_CD-ROM
- E: ID_MODEL_ENC=VBOX\x20CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x 20\x20\x20\x20\x20\x20\x20
- E: ID_REVISION=1.0
- E: ID_SERIAL=VBOX_CD-ROM_VB2-01700376
- E: ID_SERIAL_SHORT=VB2-01700376
-
-instead of just
-
- # udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- E: UDEV_LOG=3
- E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0
- E: DEVTYPE=scsi_device
- E: DRIVER=sr
- E: MODALIAS=scsi:t-0x05
- E: SUBSYSTEM=scsi
- E: ID_SCSI=1
- E: ID_VENDOR=VBOX
- E: ID_VENDOR_ENC=VBOX\x20\x20\x20\x20
- E: ID_MODEL=CD-ROM
- E: ID_MODEL_ENC=CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
- E: ID_REVISION=1.0
- E: ID_TYPE=cd
-
-Signed-off-by: David Zeuthen <davidz@redhat.com>
----
- extras/ata_id/ata_id.c                    |  122 ++++++++++++++++++++++++++---
- rules/rules.d/60-persistent-storage.rules |    4 +
- 2 files changed, 114 insertions(+), 12 deletions(-)
-
-diff --git a/extras/ata_id/ata_id.c b/extras/ata_id/ata_id.c
-index 41544e9..92387e5 100644
---- a/extras/ata_id/ata_id.c
-+++ b/extras/ata_id/ata_id.c
-@@ -202,6 +202,89 @@ static int disk_identify_command(int	  fd,
- 	return ret;
- }
- 
-+static int disk_identify_packet_device_command(int	  fd,
-+					       void	 *buf,
-+					       size_t	  buf_len)
-+{
-+	struct sg_io_v4 io_v4;
-+	uint8_t cdb[16];
-+	uint8_t sense[32];
-+	uint8_t *desc = sense+8;
-+	int ret;
-+
-+	/*
-+	 * ATA Pass-Through 16 byte command, as described in
-+	 *
-+	 *  T10 04-262r8 ATA Command Pass-Through
-+	 *
-+	 * from http://www.t10.org/ftp/t10/document.04/04-262r8.pdf
-+	 */
-+	memset(cdb, 0, sizeof(cdb));
-+	cdb[0] = 0x85;			/* OPERATION CODE: 16 byte pass through */
-+	cdb[1] = 4 << 1;		/* PROTOCOL: PIO Data-in */
-+	cdb[2] = 0x2e;			/* OFF_LINE=0, CK_COND=1, T_DIR=1, BYT_BLOK=1, T_LENGTH=2 */
-+	cdb[3] = 0;			/* FEATURES */
-+	cdb[4] = 0;			/* FEATURES */
-+	cdb[5] = 0;			/* SECTORS */
-+	cdb[6] = 1;			/* SECTORS */
-+	cdb[7] = 0;			/* LBA LOW */
-+	cdb[8] = 0;			/* LBA LOW */
-+	cdb[9] = 0;			/* LBA MID */
-+	cdb[10] = 0;			/* LBA MID */
-+	cdb[11] = 0;			/* LBA HIGH */
-+	cdb[12] = 0;			/* LBA HIGH */
-+	cdb[13] = 0;			/* DEVICE */
-+	cdb[14] = 0xA1;			/* Command: ATA IDENTIFY PACKET DEVICE */;
-+	cdb[15] = 0;			/* CONTROL */
-+	memset(sense, 0, sizeof(sense));
-+
-+	memset(&io_v4, 0, sizeof(struct sg_io_v4));
-+	io_v4.guard = 'Q';
-+	io_v4.protocol = BSG_PROTOCOL_SCSI;
-+	io_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD;
-+	io_v4.request_len = sizeof (cdb);
-+	io_v4.request = (uintptr_t) cdb;
-+	io_v4.max_response_len = sizeof (sense);
-+	io_v4.response = (uintptr_t) sense;
-+	io_v4.din_xfer_len = buf_len;
-+	io_v4.din_xferp = (uintptr_t) buf;
-+	io_v4.timeout = COMMAND_TIMEOUT_MSEC;
-+
-+	ret = ioctl(fd, SG_IO, &io_v4);
-+	if (ret != 0) {
-+		/* could be that the driver doesn't do version 4, try version 3 */
-+		if (errno == EINVAL) {
-+			struct sg_io_hdr io_hdr;
-+
-+			memset(&io_hdr, 0, sizeof(struct sg_io_hdr));
-+			io_hdr.interface_id = 'S';
-+			io_hdr.cmdp = (unsigned char*) cdb;
-+			io_hdr.cmd_len = sizeof (cdb);
-+			io_hdr.dxferp = buf;
-+			io_hdr.dxfer_len = buf_len;
-+			io_hdr.sbp = sense;
-+			io_hdr.mx_sb_len = sizeof (sense);
-+			io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
-+			io_hdr.timeout = COMMAND_TIMEOUT_MSEC;
-+
-+			ret = ioctl(fd, SG_IO, &io_hdr);
-+			if (ret != 0)
-+				goto out;
-+		} else {
-+			goto out;
-+		}
-+	}
-+
-+	if (!(sense[0] == 0x72 && desc[0] == 0x9 && desc[1] == 0x0c)) {
-+		errno = EIO;
-+		ret = -1;
-+		goto out;
-+	}
-+
-+ out:
-+	return ret;
-+}
-+
- /**
-  * disk_identify_get_string:
-  * @identify: A block of IDENTIFY data
-@@ -256,31 +339,36 @@ static void disk_identify_fixup_uint16 (uint8_t identify[512], unsigned int offs
-  * @udev: The libudev context.
-  * @fd: File descriptor for the block device.
-  * @out_identify: Return location for IDENTIFY data.
-+ * @out_is_packet_device: Return location for whether returned data is from a IDENTIFY PACKET DEVICE.
-  *
-- * Sends the IDENTIFY DEVICE command to the device represented by
-- * @fd. If successful, then the result will be copied into
-- * @out_identify.
-+ * Sends the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE command to the
-+ * device represented by @fd. If successful, then the result will be
-+ * copied into @out_identify and @out_is_packet_device.
-  *
-  * This routine is based on code from libatasmart, Copyright 2008
-  * Lennart Poettering, LGPL v2.1.
-  *
-- * Returns: 0 if the IDENTIFY data was successfully obtained,
-- * otherwise non-zero with errno set.
-+ * Returns: 0 if the data was successfully obtained, otherwise
-+ * non-zero with errno set.
-  */
- static int disk_identify (struct udev *udev,
- 			  int	       fd,
--			  uint8_t      out_identify[512])
-+			  uint8_t      out_identify[512],
-+			  int	      *out_is_packet_device)
- {
- 	int ret;
- 	uint8_t inquiry_buf[36];
- 	int peripheral_device_type;
- 	int all_nul_bytes;
- 	int n;
-+	int is_packet_device;
- 
- 	assert (out_identify != NULL);
-+
- 	/* init results */
- 	ret = -1;
- 	memset (out_identify, '\0', 512);
-+	is_packet_device = 0;
- 
- 	/* If we were to use ATA PASS_THROUGH (12) on an ATAPI device
- 	 * we could accidentally blank media. This is because MMC's BLANK
-@@ -309,6 +397,12 @@ static int disk_identify (struct udev *udev,
- 
- 	/* SPC-4, section 6.4.2: Standard INQUIRY data */
- 	peripheral_device_type = inquiry_buf[0] & 0x1f;
-+	if (peripheral_device_type == 0x05)
-+	  {
-+	    is_packet_device = 1;
-+	    ret = disk_identify_packet_device_command(fd, out_identify, 512);
-+	    goto check_nul_bytes;
-+	  }
- 	if (peripheral_device_type != 0x00) {
- 		ret = -1;
- 		errno = EIO;
-@@ -320,6 +414,7 @@ static int disk_identify (struct udev *udev,
- 	if (ret != 0)
- 		goto out;
- 
-+ check_nul_bytes:
- 	 /* Check if IDENTIFY data is all NUL bytes - if so, bail */
- 	all_nul_bytes = 1;
- 	for (n = 0; n < 512; n++) {
-@@ -336,6 +431,8 @@ static int disk_identify (struct udev *udev,
- 	}
- 
- out:
-+	if (out_is_packet_device != NULL)
-+	  *out_is_packet_device = is_packet_device;
- 	return ret;
- }
- 
-@@ -350,7 +447,7 @@ int main(int argc, char *argv[])
- {
- 	struct udev *udev;
- 	struct hd_driveid id;
--	 uint8_t identify[512];
-+	uint8_t identify[512];
- 	char model[41];
- 	char model_enc[256];
- 	char serial[21];
-@@ -358,8 +455,9 @@ int main(int argc, char *argv[])
- 	const char *node = NULL;
- 	int export = 0;
- 	int fd;
--	 uint16_t word;
-+	uint16_t word;
- 	int rc = 0;
-+	int is_packet_device = 0;
- 	static const struct option options[] = {
- 		{ "export", no_argument, NULL, 'x' },
- 		{ "help", no_argument, NULL, 'h' },
-@@ -408,7 +506,7 @@ int main(int argc, char *argv[])
- 		goto exit;
- 	}
- 
--	if (disk_identify(udev, fd, identify) == 0) {
-+	if (disk_identify(udev, fd, identify, &is_packet_device) == 0) {
- 		/*
- 		 * fix up only the fields from the IDENTIFY data that we are going to
- 		 * use and copy it into the hd_driveid struct for convenience
-@@ -416,7 +514,7 @@ int main(int argc, char *argv[])
- 		disk_identify_fixup_string (identify,  10, 20);	/* serial */
- 		disk_identify_fixup_string (identify,  23,  6);	/* fwrev */
- 		disk_identify_fixup_string (identify,  27, 40);	/* model */
--		disk_identify_fixup_uint16 (identify,   0);	/* configuration */
-+		disk_identify_fixup_uint16 (identify,	0);	/* configuration */
- 		disk_identify_fixup_uint16 (identify,  75);	/* queue depth */
- 		disk_identify_fixup_uint16 (identify,  75);	/* SATA capabilities */
- 		disk_identify_fixup_uint16 (identify,  82);	/* command set supported */
-@@ -457,8 +555,8 @@ int main(int argc, char *argv[])
- 	udev_util_replace_chars(revision, NULL);
- 
- 	if (export) {
--		  /* Set this to convey the disk speaks the ATA protocol */
--		  printf("ID_ATA=1\n");
-+		/* Set this to convey the disk speaks the ATA protocol */
-+		printf("ID_ATA=1\n");
- 
- 		if ((id.config >> 8) & 0x80) {
- 			/* This is an ATAPI device */
-diff --git a/rules/rules.d/60-persistent-storage.rules b/rules/rules.d/60-persistent-storage.rules
-index d3f2f73..8baabc2 100644
---- a/rules/rules.d/60-persistent-storage.rules
-+++ b/rules/rules.d/60-persistent-storage.rules
-@@ -12,6 +12,8 @@ ACTION=="remove", GOTO="persistent_storage_end"
- 
- # run scsi_id and ata_id on the actual SCSI device
- SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", ATTR{vendor}=="ATA", IMPORT{program}="ata_id --export $root/bsg/$kernel"
-+# ATA/ATAPI devices is of type 0x05 and vendor is usually not ATA
-+SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", ATTR{type}=="5", IMPORT{program}="ata_id --export $root/bsg/$kernel"
- SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device $root/bsg/$kernel"
- 
- # from this point on, only care about block devices
-@@ -40,6 +42,8 @@ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program
- KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="ata", IMPORT{program}="ata_id --export $tempnode"
- # ATA devices using the "scsi" subsystem
- KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $tempnode"
-+# ATA/ATAPI devices using the "scsi" subsystem
-+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", IMPORT{program}="ata_id --export $tempnode"
- # scsi devices
- KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="scsi"
- KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="cciss"
--- 
-1.7.3.4
-
diff --git a/source/a/udisks/slack-desc b/source/a/udisks/slack-desc
new file mode 100644
index 00000000..a85adeb4
--- /dev/null
+++ b/source/a/udisks/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+udisks: udisks (storage device daemon)
+udisks:
+udisks: The udisks project provides a storage daemon that implements D-Bus
+udisks: interfaces that can be used to query and manipulate storage devices.
+udisks:
+udisks: It also includes a command-line tool, udisks(1), that can be used to
+udisks: query and control the daemon.
+udisks:
+udisks: Homepage:  http://www.freedesktop.org/wiki/Software/udisks
+udisks:
+udisks:
diff --git a/source/a/udisks/udisks.SlackBuild b/source/a/udisks/udisks.SlackBuild
new file mode 100755
index 00000000..9d12e783
--- /dev/null
+++ b/source/a/udisks/udisks.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Slackware build script for udisks
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
+PKGNAM=udisks
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$TARGET
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Move the bash completion file to the right place
+mkdir -p $PKG/etc/bash_completion.d
+mv $PKG/etc/profile.d/udisks-bash-completion.sh \
+   $PKG/etc/bash_completion.d/udisks
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/udisks/udisks.url b/source/a/udisks/udisks.url
new file mode 100644
index 00000000..cef0134b
--- /dev/null
+++ b/source/a/udisks/udisks.url
@@ -0,0 +1 @@
+http://hal.freedesktop.org/releases/
diff --git a/source/a/udisks2/doinst.sh b/source/a/udisks2/doinst.sh
new file mode 100644
index 00000000..c186599a
--- /dev/null
+++ b/source/a/udisks2/doinst.sh
@@ -0,0 +1,12 @@
+# udisks2 is stupid about testing files before using them.  If /etc/crypttab
+# does not exist, it will fill the log with "errors" as it tries to open the
+# nonexistent file.  There's really no reason that a system without encrypted
+# volumes should require this file, but nobody upstream cares to fix the
+# problem (and the code's too messy for me to find it), so we have little
+# choice but to trowel over this.  (sigh)
+
+if [ ! -r etc/crypttab ]; then
+  # echo "HEY, EVERYONE SHOULD HAVE A CRYPTTAB!!!"  (just kidding)
+  touch etc/crypttab
+fi
+
diff --git a/source/a/udisks2/slack-desc b/source/a/udisks2/slack-desc
new file mode 100644
index 00000000..0d6d4427
--- /dev/null
+++ b/source/a/udisks2/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+udisks2: udisks2 (storage device daemon v2)
+udisks2:
+udisks2: The udisks project provides a storage daemon that implements D-Bus
+udisks2: interfaces that can be used to query and manipulate storage devices.
+udisks2:
+udisks2: It also includes a command-line tool, udisks(1), that can be used to
+udisks2: query and control the daemon.
+udisks2:
+udisks2: Homepage:  http://www.freedesktop.org/wiki/Software/udisks
+udisks2:
+udisks2:
diff --git a/source/a/udisks2/udisks2.SlackBuild b/source/a/udisks2/udisks2.SlackBuild
new file mode 100755
index 00000000..4316488e
--- /dev/null
+++ b/source/a/udisks2/udisks2.SlackBuild
@@ -0,0 +1,139 @@
+#!/bin/sh
+
+# Slackware build script for udisks
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+PKGNAM=udisks2
+SRCNAM=udisks
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1
+cd $SRCNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --disable-static \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/upower/doinst.sh b/source/a/upower/doinst.sh
new file mode 100644
index 00000000..46abf401
--- /dev/null
+++ b/source/a/upower/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/UPower/UPower.conf.new
+
diff --git a/source/a/upower/slack-desc b/source/a/upower/slack-desc
new file mode 100644
index 00000000..b4401b93
--- /dev/null
+++ b/source/a/upower/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+upower: UPower (power management abstraction daemon)
+upower:
+upower: UPower is an abstraction for enumerating power devices, listening to 
+upower: device events and querying history and statistics. Any application or 
+upower: service on the system can access the org.freedesktop.UPower service 
+upower: via the system message bus. Some operations (such as suspending the 
+upower: system) are restricted using PolicyKit. 
+upower:
+upower: Homepage: http://upower.freedesktop.org/
+upower:
+upower:
diff --git a/source/a/upower/upower.SlackBuild b/source/a/upower/upower.SlackBuild
new file mode 100755
index 00000000..e5831960
--- /dev/null
+++ b/source/a/upower/upower.SlackBuild
@@ -0,0 +1,121 @@
+#!/bin/sh
+
+# Slackware build script for upower
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
+PKGNAM=upower
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --enable-man-pages \
+  --build=$TARGET
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Don't clobber the config file on upgrades
+mv $PKG/etc/UPower/UPower.conf $PKG/etc/UPower/UPower.conf.new
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/upower/upower.url b/source/a/upower/upower.url
new file mode 100644
index 00000000..30c25b7f
--- /dev/null
+++ b/source/a/upower/upower.url
@@ -0,0 +1 @@
+http://upower.freedesktop.org/releases/
diff --git a/source/a/usb_modeswitch/device_reference.txt b/source/a/usb_modeswitch/device_reference.txt
index 10fb5fe8..db7ac8c0 100644
--- a/source/a/usb_modeswitch/device_reference.txt
+++ b/source/a/usb_modeswitch/device_reference.txt
@@ -1,7 +1,7 @@
 #
 # Device and Configuration Reference (UTF-8 encoding used)
 #
-# Last modified: 2010-08-26
+# Last modified: 2012-01-20
 #
 # Collection of configurations for usb_modeswitch, a mode switching
 # tool for controlling flip flop (multiple mode) USB devices
@@ -13,22 +13,12 @@
 # http://www.draisberghof.de/usb_modeswitch/device_reference.txt
 
 
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
+# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #
-# Important! This file is just a reference! Use the data package!
+# Don't use this file directly; for your own experiments, create a
+# config file, copy data from here, and use it with the -c parameter!
 #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-
-
-# In order to activate a device included here you might remove the
-# comment signs (";") from the respective entry.
-#
-# It is rather recommended to copy device information to a different
-# file, to ease editing work and oversight and to avoid possible
-# conflicts by activating multiple entries.
-# There is no guarantee that this file is error-free!
-#
-# The actual entries are further down, after the command reference.
+# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 
 
 # For custom settings:
@@ -43,7 +33,8 @@
 # * DefaultProduct           -p <hex number>
 #
 # This is the ID the USB device shows after having been plugged in.
-# The program needs this; if not found -> no action.
+# The program needs this, either on the command line or in the config
+# file; if not found -> no action.
 #
 #
 # * TargetVendor             -V <hex number>
@@ -67,11 +58,10 @@
 #
 #
 # * MessageEndpoint          -m <hex number>
-# 
+#
 # A kind of address inside the interface to which the "message"
 # (the sequence that does the actual switching) is directed.
-# Starting from version 0.9.7 the MessageEndpoint is autodetected
-# if not given
+# Obsolete since version 0.9.7, only useful for testing
 #
 #
 # * MessageContent           -M <hex string>
@@ -88,6 +78,7 @@
 # * ReleaseDelay             -w <milliseconds>
 #
 # Waiting time after message transfers. Helps with some sensitive devices
+# that don't want any traffic after the mode switch initialisation
 #
 #
 # * ResponseEndpoint         -r <hex number>
@@ -101,42 +92,43 @@
 #
 # * DetachStorageOnly <0/1>  -d
 #
-# Some devices just need to be detached from the usb-storage
-# driver to initiate the mode switching. Using this feature
-# instead of removing the whole usbstorage module keeps other
-# storage devices working.
+# Some early devices just needed to be detached from the usb-storage
+# driver to initiate the mode switching. Now paractically obsolete for
+# switching, but still comes handy sometimes
 #
 #
 # * HuaweiMode <0/1>         -H
 #
-# Some Huawei devices can be switched by a special control
-# message.
-#
-#
-# * SierraMode <0/1>         -S
-#
-# Some Sierra devices can be switched by a special control
-# message.
+# Some early Huawei devices can be switched by a special control
+# message. Don't use with recent devices
 #
 #
 # * SonyMode <0/1>           -O
 #
 # Some Sony-Ericsson devices can be switched by a special control
-# message. This is experimental and might not have a stable result
+# message. May take a long time (20+ seconds).
 #
-# * KobilMode <0/1>         -T
 #
-# Some Kobil devices can be switched by a special control
-# message.
+# * SierraMode <0/1>         -S
+# * KobilMode <0/1>          -T
+# * GCTMode <0/1>            -G
+# * SequansMode <0/1>        -N
+# * MobileActionMode <0/1>   -A
+# * QisdaMode <0/1>          -B
+# * CiscoMode <0/1>          -B
+#
+#
+# Flags to support devices that need special control messages.
+# The names are referring to the respective manufacturers.
 #
 #
 # * ResetUSB <0/1>           -R
 #
-# Some devices need a rougher treatment. If the switching seems
-# to do something (run udevmonitor), but your system does not reflect
-# it, try this somewhat brutal method to do a reset after switching.
-# Mind that if your device switched OK before, this will probably set
-# it back to storage mode ...
+# Few devices or systems need a rougher treatment. If the switching seems
+# to do something but your system does not reflect it, try this somewhat
+# brutal method to do a reset after switching.
+# Mind that if your device switched OK before, this may set it back to
+# storage mode ...
 #
 #
 # * Interface                -i <hex number>
@@ -175,16 +167,27 @@
 #
 # The binary tells the wrapper script NOT to check for and initiate
 # binding of the serial driver after switching.
-# Mostly useful for non-modem devices
+# Mostly useful for non-modem devices.
+#
 #
+# * WaitBefore <seconds>    (no command line parameter)
 #
-# -> All other entries are just ignored <-
+# Waiting time before taking any action. Helps with some sensitive setups.
+#
+#
+#
+# -> All other entries in config files are just ignored <-
 
 # Additional command line flags:
-# 
+#
 # Verbose output             -W
 # No output at all           -q
-# Other config file          -c <file>
+# Use config file            -c <file>
+# Use stdin for long config  -t
+# Give long config as string -f <multiline string using config file syntax>
+# Give bus number for ID'ing -b
+# Give dev number for ID'ing -g
+
 
 # For filling in all this information for an unknown device,
 # see instructions and links on the homepage:
@@ -197,47 +200,47 @@
 #######################################################
 # Option GlobeSurfer Icon (aka "Vodafone EasyBox")
 #
-# The message SHOULD be the same for all Option devices
+# The MessageContent is identical for all Option devices
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x0af0
-;TargetProduct=  0x6600
+TargetVendor=   0x0af0
+TargetProduct=  0x6600
 
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 
 #######################################################
-# Option GlobeSurfer Icon 7.2 
+# Option GlobeSurfer Icon 7.2
 #
 # Contributor: The Pharscape Forum
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x0af0
-;TargetProduct=  0x6901
+TargetVendor=   0x0af0
+TargetProduct=  0x6901
 
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 
 ########################################################
 # Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
 #
-# Contributor: Bernd Holzmüller
+# Contributor: Bernd Holzmüller
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x0af0
-;TargetProduct=  0x6600
+TargetVendor=   0x0af0
+TargetProduct=  0x6600
 
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 # ResponseEndpoint=0x84
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -245,13 +248,13 @@
 #
 # Contributors: Lucas Benedicic, Morgwai Kotarbinski
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x0af0
-;TargetProduct=  0x6701
+TargetVendor=   0x0af0
+TargetProduct=  0x6701
 
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 
 ########################################################
@@ -259,33 +262,92 @@
 #
 # Contributor: Fridtjof Busse
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x0af0
-;TargetProduct=  0x6701
+TargetVendor=   0x0af0
+TargetProduct=  0x6701
 
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 # Response reading needed according to one (1) report
-;NeedResponse=1
+NeedResponse=1
 
 
 #######################################################
 # Option GlobeSurfer Icon 7.2, new firmware (HSO driver)
 #
 # Vendor/ProductID don't change when switching, only the device
-# class does. Most new Option devices work with this. Just adapt IDs!
-# HSO driver support is available at Pharscape (www.pharscape.org)
-#
-# Contributor: Paul Hardwick
-
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0x6911
+# class does. Most new Option devices work with this. Just adapt the IDs.
+#
+# Option's HSO driver is part of the mainstream kernel; support is
+# available at Pharscape (www.pharscape.org)
+#
+# Contributors: Paul Hardwick, Philip Aben
+
+DefaultVendor=  0x0af0
+DefaultProduct= 0x6911
+
+TargetClass=    0xff
+
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+
+# Here is a list with all currently supported Option default IDs:
+#
+# 0af0:6711
+# 0af0:6731
+# 0af0:6751
+# 0af0:6771
+# 0af0:6791
+# 0af0:6811
+# 0af0:6911
+# 0af0:6951
+# 0af0:6971
+# 0af0:7011
+# 0af0:7031
+# 0af0:7051
+# 0af0:7071
+# 0af0:7111
+# 0af0:7211
+# 0af0:7251
+# 0af0:7271
+# 0af0:7301
+# 0af0:7311
+# 0af0:7361
+# 0af0:7381
+# 0af0:7401
+# 0af0:7501
+# 0af0:7601
+# 0af0:7701
+# 0af0:7801
+# 0af0:7901
+# 0af0:7a01
+# 0af0:7a05
+# 0af0:8200
+# 0af0:8201
+# 0af0:8300
+# 0af0:8302
+# 0af0:8304
+# 0af0:8400
+# 0af0:8600
+# 0af0:8800
+# 0af0:8900
+# 0af0:9000
+# 0af0:c031
+# 0af0:c100
+# 0af0:d013
+# 0af0:d031
+# 0af0:d033
+# 0af0:d035
+# 0af0:d055
+# 0af0:d057
+# 0af0:d058
+# 0af0:d155
+# 0af0:d157
+# 0af0:d255
+# 0af0:d257
+# 0af0:d357
 
-;TargetClass=    0xff
-
-;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
 
 
 ########################################################
@@ -298,75 +360,15 @@
 #
 # Contributor: wahlm, Peter Kraker, Pakdhetimin Sekum
 
-;DefaultVendor=  0x1e0e
-;DefaultProduct= 0xf000
-
-;TargetVendor=   0x1e0e
-;TargetProduct=  0x9000
-
-;MessageContent="555342431234567800000000000006bd000000020000000000000000000000"
-
-;NeedResponse=1
-
-
-#######################################################
-# Option iCON 225 HSDPA
-#
-# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
-#
-# Contributor: Matti Viljanen
-
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0x6971
-
-;TargetClass=    0xff
-
-;MessageContent="555342431223456780100000080000601000000000000000000000000000000"
-
-
-#######################################################
-# Option GlobeTrotter HSUPA Modem (aka "T-Mobile Web'n'walk Card Compact III')
-#
-# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
-#
-# Contributor: Gerold Gruber
-
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0x7011
-
-;TargetClass=    0xff
-
-;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+DefaultVendor=  0x1e0e
+DefaultProduct= 0xf000
 
+TargetVendor=   0x1e0e
+TargetProduct=  0x9000
 
-###################################################### 
-# Option iCON 401
-#
-# HSO driver 
-#
-# Contributor: Vincent Teoh
-
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0x7401
-
-;TargetClass=    0xff
-
-;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
-
-;NeedResponse=1
-
+MessageContent="555342431234567800000000000006bd000000020000000000000000000000"
 
-######################################################## 
-# Vodafone K3760 (made by Option, HSO driver) 
-#
-# Contributor: The Solutor
-
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0x7501
-
-;TargetClass=    0xff
-
-;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -374,12 +376,12 @@
 #
 # Contributor: sissie from Bullteam
 
-;DefaultVendor=  0x0af0
-;DefaultProduct= 0xd033
+DefaultVendor=  0x0af0
+DefaultProduct= 0xd033
 
-;TargetClass=    0xff
+TargetClass=    0xff
 
-;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+MessageContent="55534243785634120100000080000601000000000000000000000000000000"
 
 
 ########################################################
@@ -387,27 +389,27 @@
 #
 # Contributor: Hans Kurent, Denis Sutter, Vincent Teoh
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1003
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1003
 
-;TargetClass=    0xff
+TargetClass=    0xff
 
-;HuaweiMode=1
+HuaweiMode=1
 
 
 ########################################################
-# Huawei E169
+# Huawei E169 and others
 #
 # Contributor: Dale Lane
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1001
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1001
 
-;TargetClass=    0xff
+TargetClass=    0xff
 
 # choose one of these:
-;DetachStorageOnly=1
-;HuaweiMode=1
+DetachStorageOnly=1
+HuaweiMode=1
 
 
 ########################################################
@@ -415,12 +417,12 @@
 #
 # Contributor: Tom Dawahare
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1414
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1414
 
-;TargetClass=    0xff
+TargetClass=    0xff
 
-;HuaweiMode=1
+HuaweiMode=1
 
 
 ########################################################
@@ -431,13 +433,13 @@
 #
 # Contributor: Joakim Wenrgren
 
-;DefaultVendor=  0x1033
-;DefaultProduct= 0x0035
+DefaultVendor=  0x1033
+DefaultProduct= 0x0035
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x1003
+TargetVendor=   0x12d1
+TargetProduct=  0x1003
 
-;HuaweiMode=1
+HuaweiMode=1
 
 
 ########################################################
@@ -445,18 +447,18 @@
 #
 # Probably works with DetachStorageOnly too
 #
-# Contributor: Flávio Moringa and others
+# Contributor: Flávio Moringa and others
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProductList="0001"
+TargetVendor=   0x19d2
+TargetProductList="0001"
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -464,16 +466,16 @@
 #
 # Contributor: andylog
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0002
+TargetVendor=   0x19d2
+TargetProduct=  0x0002
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -484,28 +486,28 @@
 #
 # Contributor: Alvaro Lopes <alvieboy at alvie dot com>
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
 
 # To modem mode:
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0015
+TargetVendor=   0x19d2
+TargetProduct=  0x0015
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 # To SD slot mode:
 
-;TargetVendor=   0x05c6
-;TargetProduct=  0x2001
+TargetVendor=   0x05c6
+TargetProduct=  0x2001
 
-;MessageContent="55534243123456782000000080000a86010101180101010101000000000000"
+MessageContent="55534243123456782000000080000a86010101180101010101000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -515,19 +517,20 @@
 # ZTE MF633
 # ZTE MF636 (aka "Telstra / BigPond 7.2 Mobile Card")
 # ZTE MF637
+# and probably others not listed here
 #
 # Contributor: Joakim Wennergren and others
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0031
+TargetVendor=   0x19d2
+TargetProduct=  0x0031
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -535,16 +538,16 @@
 #
 # Contributor: andylog
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0037
+TargetVendor=   0x19d2
+TargetProduct=  0x0037
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -557,29 +560,29 @@
 #
 # Contributor: Michael Khurtsiya, Amit Pundir and others
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0xfff5
+DefaultVendor=  0x19d2
+DefaultProduct= 0xfff5
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0xffff
+TargetVendor=   0x19d2
+TargetProduct=  0xffff
 
 # No. 2
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0xfff6
+DefaultVendor=  0x19d2
+DefaultProduct= 0xfff6
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0xfff1
+TargetVendor=   0x19d2
+TargetProduct=  0xfff1
 
 # No. 3
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0xfff5
+DefaultVendor=  0x19d2
+DefaultProduct= 0xfff5
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0xfff1
+TargetVendor=   0x19d2
+TargetProduct=  0xfff1
 
-;MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
+MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
 
 
 ########################################################
@@ -587,13 +590,13 @@
 #
 # Contributor: Wasim Baig
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0xfff5
+DefaultVendor=  0x19d2
+DefaultProduct= 0xfff5
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0xffff
+TargetVendor=   0x19d2
+TargetProduct=  0xffff
 
-;MessageContent="5553424312345678c00000008000069f010000000000000000000000000000"
+MessageContent="5553424312345678c00000008000069f010000000000000000000000000000"
 
 # Just for information: try it with the message from the AC8710 ...
 
@@ -603,16 +606,16 @@
 #
 # Contributor: David Taillandier
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0052
+TargetVendor=   0x19d2
+TargetProduct=  0x0052
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -620,16 +623,16 @@
 #
 # Contributor: Lucio Asnaghi a.k.a. kRAkEn/gORe
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0002
+TargetVendor=   0x19d2
+TargetProduct=  0x0002
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -637,16 +640,16 @@
 #
 # Contributor: Alex Scortegagna
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0002
+TargetVendor=   0x19d2
+TargetProduct=  0x0002
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -656,14 +659,14 @@
 #
 # Contributor: Razvan Dragomirescu, Mike Kirk
 
-;DefaultVendor=  0x1410
-;DefaultProduct= 0x5010
+DefaultVendor=  0x1410
+DefaultProduct= 0x5010
 
-;TargetVendor=   0x1410
-;TargetProduct=  0x4400
+TargetVendor=   0x1410
+TargetProduct=  0x4400
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;NeedResponse=1
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -673,14 +676,14 @@
 #
 # Contributor: Chris Thielen
 
-;DefaultVendor=  0x1410
-;DefaultProduct= 0x5010
+DefaultVendor=  0x1410
+DefaultProduct= 0x5010
 
-;TargetVendor=   0x1410
-;TargetProduct=  0x4100
+TargetVendor=   0x1410
+TargetProduct=  0x4100
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;NeedResponse=1
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -688,13 +691,19 @@
 #
 # Contributor: Joakim Wennergren
 
-;DefaultVendor=  0x1410
-;DefaultProduct= 0x5020
+DefaultVendor= 0x1410
+DefaultProduct=0x5020
 
-;Interface=      5
+DefaultVendor= 0x1410
+TargetProductList="6000,7001"
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;NeedResponse=1
+# Don't use this, original report must be wrong,
+# https://bugzilla.redhat.com/show_bug.cgi?id=728318
+#
+# Interface=5
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -702,14 +711,14 @@
 #
 # Contributor: Richard Laager
 
-;DefaultVendor=  0x1410
-;DefaultProduct= 0x5030
+DefaultVendor=  0x1410
+DefaultProduct= 0x5030
 
-;TargetVendor=   0x1410
-;TargetProduct=  0x6000
+TargetVendor=   0x1410
+TargetProduct=  0x6000
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;NeedResponse=1
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -718,25 +727,25 @@
 #
 # Contributor: Aleksandar Samardzic, Marcelo Fernandez
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0x1001
+DefaultVendor=  0x1c9e
+DefaultProduct= 0x1001
 
-;TargetVendor=   0x1c9e
-;TargetProduct=  0x6061
+TargetVendor=   0x1c9e
+TargetProduct=  0x6061
 
-;MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
+MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
 
 
 ########################################################
 # Alcatel X200/X060S
 
-;DefaultVendor=  0x1bbb
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1bbb
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1bbb
-;TargetProduct=  0x0000
+TargetVendor=   0x1bbb
+TargetProduct=  0x0000
 
-;MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
 
 
 ########################################################
@@ -748,14 +757,14 @@
 #
 # Contributor: Vladimir Poluektov, Gabriel Smolar
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x16d5
-;TargetProduct=  0x6502
+TargetVendor=   0x16d5
+TargetProduct=  0x6502
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;NeedResponse=1
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -767,15 +776,15 @@
 #
 # Contributor: Alexander Czigler
 
-;DefaultVendor=  0x1a8d
-;DefaultProduct= 0x1000
+DefaultVendor=  0x1a8d
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x1a8d
-;TargetProduct=  0x1002
+TargetVendor=   0x1a8d
+TargetProduct=  0x1002
 
-;MessageContent="55534243123456781200000080000603000000020000000000000000000000"
+MessageContent="55534243123456781200000080000603000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -785,15 +794,15 @@
 #
 # Contributor: Alexander Czigler
 
-;DefaultVendor=  0x1dd6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x1dd6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x1dd6
-;TargetProduct=  0x1002
+TargetVendor=   0x1dd6
+TargetProduct=  0x1002
 
-;MessageContent="55534243123456781200000080000603000000020000000000000000000000"
+MessageContent="55534243123456781200000080000603000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -804,13 +813,13 @@
 #
 # Contributor: Alexander Czigler
 
-;DefaultVendor=  0x16d8
-;DefaultProduct= 0x6803
+DefaultVendor=  0x16d8
+DefaultProduct= 0x6803
 
-;TargetVendor=   0x16d8
-;TargetProduct=  0x680a
+TargetVendor=   0x16d8
+TargetProduct=  0x680a
 
-;MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
+MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
 
 
 ########################################################
@@ -818,13 +827,13 @@
 #
 # Contributor: Mathias Picker
 
-;DefaultVendor=  0x16d8
-;DefaultProduct= 0xf000
+DefaultVendor=  0x16d8
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x16d8
-;TargetProduct=  0x6006
+TargetVendor=   0x16d8
+TargetProduct=  0x6006
 
-;MessageContent="55534243d85dd88524000000800008ff524445564348470000000000000000"
+MessageContent="55534243d85dd88524000000800008ff524445564348470000000000000000"
 
 
 ########################################################
@@ -832,15 +841,15 @@
 #
 # Contributor: Mijail Anton
 
-;DefaultVendor=  0x0930
-;DefaultProduct= 0x0d46
+DefaultVendor=  0x0930
+DefaultProduct= 0x0d46
 
-;TargetVendor=   0x0930
-;TargetProduct=  0x0d45
+TargetVendor=   0x0930
+TargetProduct=  0x0d45
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -848,13 +857,13 @@
 #
 # Contributor: Mark A. Ziesemer
 
-;DefaultVendor=  0x106c
-;DefaultProduct= 0x3b03
+DefaultVendor=  0x106c
+DefaultProduct= 0x3b03
 
-;TargetVendor=   0x106c
-;TargetProduct=  0x3715
+TargetVendor=   0x106c
+TargetProduct=  0x3715
 
-;MessageContent="555342431234567824000000800008ff024445564348470000000000000000"
+MessageContent="555342431234567824000000800008ff024445564348470000000000000000"
 
 
 ########################################################
@@ -862,15 +871,15 @@
 #
 # Contributor: "paul"
 
-;DefaultVendor=  0x1ab7
-;DefaultProduct= 0x5700
+DefaultVendor=  0x1ab7
+DefaultProduct= 0x5700
 
-;TargetVendor=   0x1ab7
-;TargetProduct=  0x5731
+TargetVendor=   0x1ab7
+TargetProduct=  0x5731
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -878,15 +887,15 @@
 #
 # Contributor: A-Link Europe Ltd.
 
-;DefaultVendor=  0x1e0e
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1e0e
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1e0e
-;TargetProduct=  0x9200
+TargetVendor=   0x1e0e
+TargetProduct=  0x9200
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -894,13 +903,13 @@
 #
 # Contributor: Vincent Teoh
 
-;DefaultVendor=  0x1199
-;DefaultProduct= 0x0fff
+DefaultVendor=  0x1199
+DefaultProduct= 0x0fff
 
-;TargetVendor=   0x1199
-;TargetProduct=  0x0023
+TargetVendor=   0x1199
+TargetProduct=  0x0023
 
-;SierraMode=1
+SierraMode=1
 
 
 ########################################################
@@ -908,13 +917,13 @@
 #
 # Contributor: Vincent Teoh
 
-;DefaultVendor=  0x1199
-;DefaultProduct= 0x0fff
+DefaultVendor=  0x1199
+DefaultProduct= 0x0fff
 
-;TargetVendor=   0x1199
-;TargetProduct=  0x6856
+TargetVendor=   0x1199
+TargetProduct=  0x6856
 
-;SierraMode=1
+SierraMode=1
 
 
 ########################################################
@@ -922,13 +931,13 @@
 #
 # Special procedure, takes around 25 secs. on the whole
 
-;DefaultVendor=  0x0fce
-;DefaultProduct= 0xd0e1
+DefaultVendor=  0x0fce
+DefaultProduct= 0xd0e1
 
-;TargetClass=    0x02
+TargetClass=    0x02
 
-;SonyMode=1
-;Configuration=2
+SonyMode=1
+Configuration=2
 
 
 ########################################################
@@ -936,12 +945,12 @@
 #
 # Recommended init command: ATE0V1&D2&C1S0=0
 #
-# Contributor: Jérôme Oufella
+# Contributor: Jérôme Oufella
 
-;DefaultVendor=  0x1004
-;DefaultProduct= 0x1000
+DefaultVendor=  0x1004
+DefaultProduct= 0x1000
 
-;MessageContent="55534243123456780000000000000aff554d53434847000000000000000000"
+MessageContent="55534243123456780000000000000aff554d53434847000000000000000000"
 
 
 ########################################################
@@ -954,13 +963,13 @@
 #
 # Contributor: A Friend
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x04e8
-;TargetProduct=  0x6601
+TargetVendor=   0x04e8
+TargetProduct=  0x6601
 
-;MessageContent="55534243123456780000000000000616000000000000000000000000000000"
+MessageContent="55534243123456780000000000000616000000000000000000000000000000"
 
 
 ######################################################## 
@@ -968,13 +977,13 @@
 #
 # Contributor: Stefan Olejnik
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1c9e
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1c9e
-;TargetProduct=  0x9000
+TargetVendor=   0x1c9e
+TargetProduct=  0x9000
 
-;MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
 
 
 ########################################################
@@ -984,13 +993,13 @@
 #
 # Contributor: Vincent Teoh
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1c9e
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1c9e
-;TargetProduct=  0x9063
+TargetVendor=   0x1c9e
+TargetProduct=  0x9063
 
-;MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
 
 
 ########################################################
@@ -1000,13 +1009,13 @@
 # 
 # Contributor: Aaron Guidazzi
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0x9200
+DefaultVendor=  0x1c9e
+DefaultProduct= 0x9200
 
-;TargetVendor=   0x1c9e
-;TargetProduct=  0x9202
+TargetVendor=   0x1c9e
+TargetProduct=  0x9202
 
-;MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
+MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
 
 
 ########################################################
@@ -1016,13 +1025,13 @@
 #
 # Contributor: Jeffrey Hoogland
 
-;DefaultVendor=  0x1f28
-;DefaultProduct= 0x0021
+DefaultVendor=  0x1f28
+DefaultProduct= 0x0021
 
-;TargetVendor=   0x1f28
-;TargetProduct=  0x0020
+TargetVendor=   0x1f28
+TargetProduct=  0x0020
 
-;MessageContent="555342431234567824000000800108df200000000000000000000000000000"
+MessageContent="555342431234567824000000800108df200000000000000000000000000000"
 
 # Afterwards (optional): "usb_modeswitch -v 0x1f28 -p 0x0020 -R"
 
@@ -1032,13 +1041,13 @@
 #
 # Contributor: Chris Wright
 
-;DefaultVendor=  0x1b7d
-;DefaultProduct= 0x0700
+DefaultVendor=  0x1b7d
+DefaultProduct= 0x0700
 
-;TargetVendor=   0x1b7d
-;TargetProduct=  0x0001
+TargetVendor=   0x1b7d
+TargetProduct=  0x0001
 
-;MessageContent="555342431234567824000000800008FF05B112AEE102000000000000000000"
+MessageContent="555342431234567824000000800008FF05B112AEE102000000000000000000"
 
 
 ########################################################
@@ -1048,13 +1057,13 @@
 #
 # Contributor: Arif Ahmed
 
-;DefaultVendor=  0x04e8
-;DefaultProduct= 0xf000
+DefaultVendor=  0x04e8
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x04e8
-;TargetProduct=  0x6601
+TargetVendor=   0x04e8
+TargetProduct=  0x6601
 
-;MessageContent="55534243123456780000000000000616000000000000000000000000000000"
+MessageContent="55534243123456780000000000000616000000000000000000000000000000"
 
 
 ########################################################
@@ -1064,13 +1073,13 @@
 #
 # Contributor: Paranoid Paranoia
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1446
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1446
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x14ac
+TargetVendor=   0x12d1
+TargetProduct=  0x14ac
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 ########################################################
@@ -1079,13 +1088,13 @@
 #
 # Contributor: Anders Blomdell, Ahmed Soliman
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1446
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1446
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x1001
+TargetVendor=   0x12d1
+TargetProduct=  0x1001
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 ########################################################
@@ -1093,16 +1102,16 @@
 #
 # Contributor: Paul McDermott
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0055
+TargetVendor=   0x19d2
+TargetProduct=  0x0055
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ######################################################## 
@@ -1111,13 +1120,13 @@
 #
 # Contributor: Chris
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1c9e
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1c9e
-;TargetProduct=  0x9603
+TargetVendor=   0x1c9e
+TargetProduct=  0x9603
 
-;MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
 
 
 ######################################################## 
@@ -1125,15 +1134,15 @@
 #
 # Contributor: Zhang Le
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x2001
+DefaultVendor=  0x05c6
+DefaultProduct= 0x2001
 
-;TargetVendor=   0x1e0e
-;TargetProductList="ce16,cefe"
+TargetVendor=   0x1e0e
+TargetProductList="ce16,cefe"
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ######################################################## 
@@ -1141,15 +1150,15 @@
 #
 # Contributor: Matt Roberds
 
-;DefaultVendor=  0x1410
-;DefaultProduct= 0x5031
+DefaultVendor=  0x1410
+DefaultProduct= 0x5031
 
-;TargetVendor=   0x1410
-;TargetProduct=  0x6002
+TargetVendor=   0x1410
+TargetProduct=  0x6002
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1157,31 +1166,31 @@
 #
 # Contributor: Moritz Grosse-Wentrup
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x0053
+DefaultVendor=  0x19d2
+DefaultProduct= 0x0053
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0031
+TargetVendor=   0x19d2
+TargetProduct=  0x0031
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;MessageContent2="55534243876543212000000080000c85010101180101010101000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent2="55534243876543212000000080000c85010101180101010101000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # Philips TalkTalk (NXP Semiconductors "Dragonfly")
 #
 
-;DefaultVendor=  0x0471
-;DefaultProduct= 0x1237
+DefaultVendor=  0x0471
+DefaultProduct= 0x1237
 
-;TargetVendor=   0x0471
-;TargetProduct=  0x1234
+TargetVendor=   0x0471
+TargetProduct=  0x1234
 
-;MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1189,33 +1198,33 @@
 #
 # Contributor: Emfox Zhou
 
-;DefaultVendor=  0x0471
-;DefaultProduct= 0x1237
+DefaultVendor=  0x0471
+DefaultProduct= 0x1237
 
-;TargetVendor=   0x0471
-;TargetProduct=  0x1206
+TargetVendor=   0x0471
+TargetProduct=  0x1206
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
-;Configuration=2
+Configuration=2
 
 
 ########################################################
 # ZTE K3565
 #
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0063
+TargetVendor=   0x19d2
+TargetProduct=  0x0063
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1223,15 +1232,15 @@
 #
 # Contributor: Prashad Prashant
 
-;DefaultVendor=  0x148f
-;DefaultProduct= 0x2578
+DefaultVendor=  0x148f
+DefaultProduct= 0x2578
 
-;TargetVendor=   0x148f
-;TargetProduct=  0x9021
+TargetVendor=   0x148f
+TargetProduct=  0x9021
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1239,13 +1248,13 @@
 #
 # Contributor: Genar Codina
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1446
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1446
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x1406
+TargetVendor=   0x12d1
+TargetProduct=  0x1406
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 ########################################################
@@ -1255,25 +1264,25 @@
 #
 # Contributor: Carolin Latze and others
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1446
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1446
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x140c
+TargetVendor=   0x12d1
+TargetProduct=  0x140c
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 ########################################################
 # C-motech CHU-629S
 #
 
-;DefaultVendor=  0x16d8
-;DefaultProduct= 0x700a
+DefaultVendor=  0x16d8
+DefaultProduct= 0x700a
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;MessageContent="55534243123456782400000080000dfe524445564348473d4e444953000000"
+MessageContent="55534243123456782400000080000dfe524445564348473d4e444953000000"
 
 
 ########################################################
@@ -1281,13 +1290,13 @@
 #
 # Contributor: Yaroslav Levandovskiy
 
-;DefaultVendor=  0x1076
-;DefaultProduct= 0x7f40
+DefaultVendor=  0x1076
+DefaultProduct= 0x7f40
 
-;TargetVendor=   0x1076
-;TargetProduct=  0x7f00
+TargetVendor=   0x1076
+TargetProduct=  0x7f00
 
-;GCTMode=1
+GCTMode=1
 
 
 ########################################################
@@ -1295,15 +1304,13 @@
 #
 # Contributor: Antti Turunen
 
-;DefaultVendor=  0x0421
-;DefaultProduct= 0x0610
+DefaultVendor=  0x0421
+DefaultProduct= 0x0610
 
-;TargetVendor=   0x0421
-;TargetProduct=  0x0612
+TargetVendor=   0x0421
+TargetProduct=  0x0612
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-
-;NeedResponse=1
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
 ########################################################
@@ -1311,13 +1318,13 @@
 #
 # Contributor: Felix Schwarz
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1520
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1520
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x1465
+TargetVendor=   0x12d1
+TargetProduct=  0x1465
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 ########################################################
@@ -1325,13 +1332,13 @@
 #
 # Contributor: Nikolaos Koutsianas
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x1521
+DefaultVendor=  0x12d1
+DefaultProduct= 0x1521
 
-;TargetVendor=   0x12d1
-;TargetProduct=  0x1464
+TargetVendor=   0x12d1
+TargetProduct=  0x1464
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 #########################################
@@ -1339,8 +1346,8 @@
 #
 # Contributor: Bob Williams
 
-;DefaultVendor=  0x0471
-;DefaultProduct= 0x1210
+DefaultVendor=  0x0471
+DefaultProduct= 0x1210
 
 # The report said that giving the target IDs prevented
 # the device from switching. Got to try it out ...
@@ -1348,9 +1355,9 @@
 #TargetVendor=   0x1dbc
 #TargetProduct=  0x0005
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1358,13 +1365,13 @@
 #
 # Contributor: Antti Turunen
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0xf000
+DefaultVendor=  0x05c6
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x05c6
-;TargetProduct=  0x9000
+TargetVendor=   0x05c6
+TargetProduct=  0x9000
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
 ########################################################
@@ -1372,12 +1379,12 @@
 #
 # WLAN devices from Linux kernel
 
-;DefaultVendor=  0x0ace
-;DefaultProduct= 0x2011
+DefaultVendor=  0x0ace
+DefaultProduct= 0x2011
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1385,12 +1392,12 @@
 #
 # WLAN devices from Linux kernel
 
-;DefaultVendor=  0x0ace
-;DefaultProduct= 0x20ff
+DefaultVendor=  0x0ace
+DefaultProduct= 0x20ff
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1398,28 +1405,28 @@
 #
 # Contributor: Reinis Danne
 
-;DefaultVendor=  0x05c6
-;DefaultProduct= 0x1000
+DefaultVendor=  0x05c6
+DefaultProduct= 0x1000
 
-;TargetVendor=   0x1fe7
-;TargetProduct=  0x0100
+TargetVendor=   0x1fe7
+TargetProduct=  0x0100
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # AVM Fritz!Wlan USB Stick N
 #
 
-;DefaultVendor=  0x057c
-;DefaultProduct= 0x84ff
+DefaultVendor=  0x057c
+DefaultProduct= 0x84ff
 
-;TargetVendor=   0x057c
-;TargetProduct=  0x8401
+TargetVendor=   0x057c
+TargetProduct=  0x8401
 
-;MessageContent="5553424312345678000000000000061b000000ff0000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000ff0000000000000000000000"
 
 
 ########################################################
@@ -1427,13 +1434,13 @@
 #
 # Contributor: Bicio
 
-;DefaultVendor=  0x072f
-;DefaultProduct= 0x100d
+DefaultVendor=  0x072f
+DefaultProduct= 0x100d
 
-;TargetVendor=   0x072f
-;TargetProduct=  0x90cc
+TargetVendor=   0x072f
+TargetProduct=  0x90cc
 
-;MessageContent="01b0000000000000000000000000000000000000000000000000000000000000"
+MessageContent="01b0000000000000000000000000000000000000000000000000000000000000"
 
 
 ########################################################
@@ -1441,13 +1448,13 @@
 #
 # Contributor: Jason Smith
 
-;DefaultVendor=  0x106c
-;DefaultProduct= 0x3b06
+DefaultVendor=  0x106c
+DefaultProduct= 0x3b06
 
-;TargetVendor=   0x106c
-;TargetProduct=  0x3717
+TargetVendor=   0x106c
+TargetProduct=  0x3717
 
-;MessageContent="555342431234567824000000800008ff020000000000000000000000000000
+MessageContent="555342431234567824000000800008ff020000000000000000000000000000
 
 
 ########################################################
@@ -1455,16 +1462,16 @@
 #
 # Contributor: Alberto Maurizi
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x0026
+DefaultVendor=  0x19d2
+DefaultProduct= 0x0026
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0094
+TargetVendor=   0x19d2
+TargetProduct=  0x0094
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1472,12 +1479,12 @@
 #
 # Contributor: Isaac Salgado
 
-;DefaultVendor=  0x12d1
-;DefaultProduct= 0x101e
+DefaultVendor=  0x12d1
+DefaultProduct= 0x101e
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;MessageContent="55534243123456780600000080000601000000000000000000000000000000"
+MessageContent="55534243123456780600000080000601000000000000000000000000000000"
 
 
 ########################################################
@@ -1485,11 +1492,11 @@
 #
 # Contributor: Alexander Gordeev
 
-;DefaultVendor= 0x198f
-;DefaultProduct=0xbccd
+DefaultVendor= 0x198f
+DefaultProduct=0xbccd
 
-;TargetVendor=  0x198f
-;TargetProduct= 0x0220
+TargetVendor=  0x198f
+TargetProduct= 0x0220
 
 MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
 
@@ -1497,15 +1504,15 @@ MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
 ########################################################
 # LG HDM-2100 (EVDO Rev.A USB modem)
 #
-# Contributor: Jérôme Oufella
+# Contributor: Jérôme Oufella
 
-;DefaultVendor= 0x1004
-;DefaultProduct=0x607f
+DefaultVendor= 0x1004
+DefaultProduct=0x607f
 
-;TargetVendor=  0x1004
-;TargetProduct= 0x6114
+TargetVendor=  0x1004
+TargetProduct= 0x6114
 
-;MessageContent="1201100102000040041014610000010200018006000100001200"
+MessageContent="1201100102000040041014610000010200018006000100001200"
 
 
 ########################################################
@@ -1513,10 +1520,10 @@ MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
 #
 # Contributor: Ying-Hung Lo
 
-;DefaultVendor= 0x0482
-;DefaultProduct=0x024d
+DefaultVendor= 0x0482
+DefaultProduct=0x024d
 
-;Configuration=2
+Configuration=2
 
 
 ########################################################
@@ -1524,16 +1531,16 @@ MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
 #
 # Contributor: Alberto Ciampini
 
-;DefaultVendor= 0x1266
-;DefaultProduct=0x1000
+DefaultVendor= 0x1266
+DefaultProduct=0x1000
 
-;TargetVendor=  0x1266
-;TargetProduct= 0x1009
+TargetVendor=  0x1266
+TargetProduct= 0x1009
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424387654321000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424387654321000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1541,13 +1548,13 @@ MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
 #
 # Contributor: Betavine Project
 
-;DefaultVendor= 0x0fce
-;DefaultProduct=0xd0cf
+DefaultVendor= 0x0fce
+DefaultProduct=0xd0cf
 
-;TargetClass=0x02
+TargetClass=0x02
 
-;DetachStorageOnly=1
-;Configuration=3
+DetachStorageOnly=1
+Configuration=3
 
 
 ########################################################
@@ -1576,15 +1583,13 @@ NeedResponse=1
 #
 # Contributor: Adam J. Porter
 
-;DefaultVendor= 0x1fac
-;DefaultProduct=0x0130
+DefaultVendor= 0x1fac
+DefaultProduct=0x0130
 
-;TargetVendor=  0x1fac
-;TargetProduct= 0x0131
+TargetVendor=  0x1fac
+TargetProduct= 0x0131
 
-;CheckSuccess=20
-
-;MessageContent="555342431234567824000000800108df200000000000000000000000000000"
+MessageContent="555342431234567824000000800108df200000000000000000000000000000"
 
 
 ########################################################
@@ -1592,13 +1597,13 @@ NeedResponse=1
 #
 # Contributor: John Watt
 
-;DefaultVendor=  0x1bbb
-;DefaultProduct= 0xf000
+DefaultVendor=  0x1bbb
+DefaultProduct= 0xf000
 
-;TargetVendor=   0x1bbb
-;TargetProduct=  0x0017
+TargetVendor=   0x1bbb
+TargetProduct=  0x0017
 
-;MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
 
 
 ########################################################
@@ -1606,16 +1611,16 @@ NeedResponse=1
 #
 # Contributors: Akos Ladanyi, John Talbut
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x0103
+DefaultVendor=  0x19d2
+DefaultProduct= 0x0103
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0031
+TargetVendor=   0x19d2
+TargetProduct=  0x0031
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
-;MessageContent2="55534243876543212000000080000c85010101180101010101000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent2="55534243876543212000000080000c85010101180101010101000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1623,15 +1628,15 @@ NeedResponse=1
 #
 # Contributor: Nils Radtke
 
-;DefaultVendor=  0x0b3c
-;DefaultProduct= 0xc700
+DefaultVendor=  0x0b3c
+DefaultProduct= 0xc700
 
-;TargetVendor=   0x0b3c
-;TargetProductList="c000,c001,c002"
+TargetVendor=   0x0b3c
+TargetProductList="c000,c001,c002"
 
-;MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1639,42 +1644,42 @@ NeedResponse=1
 #
 # Contributor: uusrlnx
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x0083
+DefaultVendor=  0x19d2
+DefaultProduct= 0x0083
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0124
+TargetVendor=   0x19d2
+TargetProduct=  0x0124
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # ZTE MU351
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x0003
+DefaultVendor=  0x19d2
+DefaultProduct= 0x0003
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # LG L-05A
 
-;DefaultVendor=  0x1004
-;DefaultProduct= 0x613a
+DefaultVendor=  0x1004
+DefaultProduct= 0x613a
 
-;TargetVendor=   0x1004
-;TargetProduct=  0x6124
+TargetVendor=   0x1004
+TargetProduct=  0x6124
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1682,15 +1687,15 @@ NeedResponse=1
 #
 # Contributor: Chris Jager
 
-;DefaultVendor=  0x1004
-;DefaultProduct= 0x613f
+DefaultVendor=  0x1004
+DefaultProduct= 0x613f
 
-;TargetVendor=   0x1004
-;TargetProduct=  0x6141
+TargetVendor=   0x1004
+TargetProduct=  0x6141
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ######################################################## 
@@ -1698,58 +1703,47 @@ NeedResponse=1
 #
 # Contributor: Oliver Mattos
 
-;DefaultVendor= 0x1004
-;DefaultProduct=0x607f
+DefaultVendor= 0x1004
+DefaultProduct=0x607f
 
-;TargetVendor=  0x1004
-;TargetProduct= 0x6000
+TargetVendor=  0x1004
+TargetProduct= 0x6000
 
-;MessageContent="555342431234567803000000800006f1022000000000000000000000000000"
-;MessageContent2="555342438765432103000000800006f1010100000000000000000000000000"
+MessageContent="555342431234567803000000800006f1022000000000000000000000000000"
+MessageContent2="555342438765432103000000800006f1010100000000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # Royaltek Q110 - UNCONFIRMED!
 
-;DefaultVendor=  0x1266
-;DefaultProduct= 0x1000
-
-;TargetVendor=   0x1266
-;TargetProduct=  0x1009
-
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424387654321000000000000061b000000020000000000000000000000"
+DefaultVendor= 0x1266
+DefaultProduct=0x1000
 
-;NeedResponse=1
+TargetVendor=  0x1266
+TargetProduct= 0x1009
 
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424387654321000000000000061b000000020000000000000000000000"
 
-########################################################
-# Rogers Rocket Stick (a Sony Ericsson device)
-
-;DefaultVendor=  0x0fce
-;DefaultProduct= 0xd103
-
-;TargetClass=    0x02
-
-;SonyMode=1
+NeedResponse=1
 
 
 ########################################################
 # BandRich BandLuxe C170, BandLuxe C270
 
-;DefaultVendor= 0x1a8d
-;DefaultProduct=0x1000
+DefaultVendor= 0x1a8d
+DefaultProduct=0x1000
 
-;TargetVendor=  0x1a8d
-;TargetProduct= 0x1009
+TargetVendor=  0x1a8d
+TargetProduct= 0x1009
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
-;ReleaseDelay=4000
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+ReleaseDelay=4000
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
@@ -1763,8 +1757,6 @@ DefaultProduct=0x14c1
 TargetVendor=  0x12d1
 TargetProduct= 0x14c6
 
-CheckSuccess=20
-
 MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
@@ -1779,8 +1771,6 @@ DefaultProduct=0x1523
 TargetVendor=  0x12d1
 TargetProduct= 0x1491
 
-CheckSuccess=20
-
 MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
@@ -1795,7 +1785,6 @@ DefaultProduct=0x20ff
 TargetVendor=  0x0cf3
 TargetProduct= 0x7010
 
-CheckSuccess=10
 NoDriverLoading=1
 
 MessageContent="5553424329000000000000000000061b000000020000000000000000000000"
@@ -1813,16 +1802,14 @@ DefaultProduct=0x0013
 TargetVendor=  0x1ee8
 TargetProduct= 0x0012
 
-CheckSuccess=20
-
 MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
 ResponseNeeded=1
 
 
 ########################################################
-# Huawei U8110 / Joy, Vodafone 845 (Android smartphone)
+# Huawei U8110 / U8300 / Joy, Vodafone 845 (Android smartphone)
 #
-# Contributor: David Erosa García
+# Contributor: David Erosa García
 
 DefaultVendor= 0x12d1
 DefaultProduct=0x1031
@@ -1830,8 +1817,6 @@ DefaultProduct=0x1031
 TargetVendor=  0x12d1
 TargetProduct= 0x1035
 
-CheckSuccess=20 
-
 MessageContent="55534243123456780600000080010a11060000000000000000000000000000"
 
 # for Android SDK
@@ -1841,7 +1826,7 @@ NoDriverLoading=1
 ########################################################
 # Nokia CS-10
 #
-# Contributor: Wacław Sierek
+# Contributor: Wacław Sierek
 
 DefaultVendor= 0x0421
 DefaultProduct=0x060c
@@ -1849,8 +1834,6 @@ DefaultProduct=0x060c
 TargetVendor=  0x0421
 TargetProduct= 0x060e
 
-CheckSuccess=20
-
 MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
@@ -1859,41 +1842,41 @@ MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 #
 # Contributor: Anoop John
 
-;DefaultVendor=  0x19d2
-;DefaultProduct= 0x2000
+DefaultVendor=  0x19d2
+DefaultProduct= 0x2000
 
-;TargetVendor=   0x19d2
-;TargetProduct=  0x0108
+TargetVendor=   0x19d2
+TargetProduct=  0x0108
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NeedResponse=1
+NeedResponse=1
 
 
 ########################################################
 # BSNL Capitel
 
-;DefaultVendor=  0x1c9e
-;DefaultProduct= 0x9e00
+DefaultVendor=  0x1c9e
+DefaultProduct= 0x9e00
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
+MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
 
 
 #######################################################
 # Samsung GT-B3730
 #
-# Contributor: Per Øyvind Karlsen
+# Contributor: Per Øyvind Karlsen
 
-;DefaultVendor= 0x04e8
-;DefaultProduct=0x689a
+DefaultVendor= 0x04e8
+DefaultProduct=0x689a
 
-;TargetVendor=  0x04e8
-;TargetProduct= 0x6889
+TargetVendor=  0x04e8
+TargetProduct= 0x6889
 
-;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+MessageContent="55534243785634120100000080000601000000000000000000000000000000"
 
 #######################################################
 # Kobil mIdentity 3G (1)
@@ -1928,14 +1911,14 @@ KobilMode=1
 #
 # Contributor: Enrico Mioso
 
-;DefaultVendor= 0x1ee8
-;DefaultProduct=0x0009
+DefaultVendor= 0x1ee8
+DefaultProduct=0x0009
 
-;TargetVendor=  0x1ee8
-;TargetProduct= 0x000b
+TargetVendor=  0x1ee8
+TargetProduct= 0x000b
 
-;MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
-;NeedResponse=1
+MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
+NeedResponse=1
 
 
 ########################################################
@@ -1943,28 +1926,28 @@ KobilMode=1
 #
 # Contributor: Pierre-Andre Cornillon
 
-;DefaultVendor= 0x0b3c
-;DefaultProduct=0xf000
+DefaultVendor= 0x0b3c
+DefaultProduct=0xf000
 
-;TargetVendor=  0x0b3c
-;TargetProduct= 0xc003
+TargetVendor=  0x0b3c
+TargetProduct= 0xc003
 
-;MessageContent="5553424312345678c000000080010606f50402527000000000000000000000"
-;NeedResponse=1
+MessageContent="5553424312345678c000000080010606f50402527000000000000000000000"
+NeedResponse=1
 
 
 #######################################################
 # Huawei EC168C (from Zantel)
 #
-# Contributor: Ã…smund Hjulstad
+# Contributor: Ã…smund Hjulstad
 
-;DefaultVendor= 0x12d1
-;DefaultProduct=0x1446
+DefaultVendor= 0x12d1
+DefaultProduct=0x1446
 
-;TargetVendor=  0x12d1
-;TargetProduct= 0x1412
+TargetVendor=  0x12d1
+TargetProduct= 0x1412
 
-;MessageContent="55534243123456780000000000000011060000000000000000000000000000"
+MessageContent="55534243123456780000000000000011060000000000000000000000000000"
 
 
 #######################################################
@@ -1972,13 +1955,13 @@ KobilMode=1
 #
 # Contributor: Juho Frits
 
-;DefaultVendor= 0x0421
-;DefaultProduct=0x0622
+DefaultVendor= 0x0421
+DefaultProduct=0x0622
 
-;TargetVendor=  0x0421
-;TargetProduct= 0x0623
+TargetVendor=  0x0421
+TargetProduct= 0x0623
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
 #######################################################
@@ -1986,13 +1969,13 @@ KobilMode=1
 #
 # Contributor: Thomas Behan
 
-;DefaultVendor= 0x0421
-;DefaultProduct=0x0627
+DefaultVendor= 0x0421
+DefaultProduct=0x0627
 
-;TargetVendor=  0x0421
-;TargetProduct= 0x0612
+TargetVendor=  0x0421
+TargetProduct= 0x0612
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
 #######################################################
@@ -2000,25 +1983,25 @@ KobilMode=1
 #
 # Contributor: Alexey Charkov
 
-;DefaultVendor= 0x05c7
-;DefaultProduct=0x1000
+DefaultVendor= 0x05c7
+DefaultProduct=0x1000
 
-;TargetVendor=  0x05c7
-;TargetProduct=	0x6000
+TargetVendor=  0x05c7
+TargetProduct=	0x6000
 
-;MessageContent="5553424312345678c00000008000069f140000000000000000000000000000"
+MessageContent="5553424312345678c00000008000069f140000000000000000000000000000"
 
 
 #######################################################
 # GW D301 (Advinne AMC)
 #
 
-;DefaultVendor= 0x0fd1
-;DefaultProduct=0x1000
+DefaultVendor= 0x0fd1
+DefaultProduct=0x1000
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;Configuration=3
+Configuration=3
 
 
 #######################################################
@@ -2026,13 +2009,13 @@ KobilMode=1
 #
 # Contributor: Shawn J. Goff
 
-;DefaultVendor= 0x1004
-;DefaultProduct=0x6190
+DefaultVendor= 0x1004
+DefaultProduct=0x6190
 
-;TargetVendor=  0x1004
-;TargetProduct= 0x61a7
+TargetVendor=  0x1004
+TargetProduct= 0x61a7
 
-;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
 
 
 #######################################################
@@ -2040,25 +2023,25 @@ KobilMode=1
 #
 # Contributor: Noel J. Bergman, Gus Esquivel
 
-;DefaultVendor= 0x106c
-;DefaultProduct=0x3b05
+DefaultVendor= 0x106c
+DefaultProduct=0x3b05
 
-;TargetVendor=  0x106c
-;TargetProduct= 0x3716
+TargetVendor=  0x106c
+TargetProduct= 0x3716
 
-;MessageContent="555342431234567824000000800008ff020000000000000000000000000000"
+MessageContent="555342431234567824000000800008ff020000000000000000000000000000"
 
 
 #######################################################
 # AirPlus MCD-800
 #
 
-;DefaultVendor= 0x1edf
-;DefaultProduct=0x6003
+DefaultVendor= 0x1edf
+DefaultProduct=0x6003
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;Configuration=3
+Configuration=3
 
 
 #######################################################
@@ -2066,37 +2049,1373 @@ KobilMode=1
 #
 # Contributor: Amit Mendapara
 
-;DefaultVendor= 0x230d
-;DefaultProduct=0x0001
+DefaultVendor= 0x230d
+DefaultProduct=0x0001
 
-;TargetClass=0xff
+TargetClass=0xff
 
-;Configuration=3
+Configuration=3
 
 
 ########################################################
 # MediaTek Wimax USB Card
 #
 
-;DefaultVendor= 0x0e8d
-;DefaultProduct=0x7109
+DefaultVendor= 0x0e8d
+DefaultProduct=0x7109
 
-;TargetVendor=  0x0e8d
-;TargetProduct= 0x7118
+TargetVendor=  0x0e8d
+TargetProduct= 0x7118
 
-;MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
-;MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
 
-;NoDriverLoading=1
+NoDriverLoading=1
 
 
 ########################################################
 # C-motech CHU-628S
+#
+# Contributor: Jungwon Seo
+
+DefaultVendor= 0x16d8
+DefaultProduct=0x6281
+
+TargetClass=0xff
+
+MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
+
+
+######################################################## 
+# HSDPA USB modem from dealextreme 
+#
+# Contributor: Andrew 'Necromant' Andrianov 
+
+DefaultVendor= 0x05c6
+DefaultProduct=0x2000
+
+TargetVendor=  0x05c6
+TargetProduct= 0x0015
+
+MessageContent="5553424368032c882400000080000612000000240000000000000000000000" 
+
+NeedResponse=1
+
+# This modem doesn't react fast - it pauses for some 30-40 seconds 
+CheckSuccess=40 
+
+
+######################################################## 
+# Exiss Mobile E-190 series (made by C-motech)
+#
+# Contributor: Tri Mulya Saputra 
+
+DefaultVendor=  0x8888
+DefaultProduct= 0x6500
+
+TargetVendor=   0x16d8
+TargetProduct=  0x6533
+
+MessageContent="5553424398e2c4812400000080000bff524445564348473d43440000000000"
+
+
+########################################################
+# D-Link DWM-156 HSUPA 3.75G USB Modem 
+#
+# Contributor: Fuego
+
+DefaultVendor= 0x07d1
+DefaultProduct=0xa800
+
+TargetVendor=  0x07d1
+TargetProduct= 0x3e02
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Franklin Wireless U210 (Variant)
+
+DefaultVendor= 0x1fac
+DefaultProduct=0x0032
+
+Configuration=2
+
+
+########################################################
+# Haier CE 100
+
+DefaultVendor= 0x201e
+DefaultProduct=0x2009
+
+TargetClass=0xff
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+
+#######################################################
+# Huawei BM358 WiMAX
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x380b
+
+TargetClass=0x02
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000" 
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000" 
+
+NeedResponse=1 
+
+
+######################################################## 
+# Huawei E352
+#
+# Contributor: Antonio Talarico
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1449
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1444
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+######################################################## 
+# Huawei ET8282 
+#
+# Contributor: Emfox Zhou
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1da1
+
+DefaultVendor= 0x12d1
+TargetProduct= 0x1d09
+
+HuaweiMode=1
+
+
+######################################################## 
+# Huawei V725 Phone (aka Vodafone 725)
+
+DefaultVendor= 0x12d1 
+DefaultProduct=0x1009 
+
+TargetClass=0xff 
+
+HuaweiMode=1
+
+
+########################################################
+# Onda MW836UP-K
+
+DefaultVendor= 0x1ee8
+DefaultProduct=0x0040
+
+TargetVendor=  0x1ee8
+TargetProduct= 0x003e
+
+MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
+
+NeedResponse=1
+
+
+########################################################
+# ZTE MF637 (Variant for Orange France)
+#
+# Contributor: David Vigier
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0110
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0121
+
+MessageContent="5553424302000000000000000000061b000000020000000000000000000000" 
+
+NeedResponse=1
+
+
+########################################################
+# Prolink P2000 CDMA
+#
+# Test string: uMa=SSE
+
+DefaultVendor= 0x05c6
+DefaultProduct=0x1000
+
+TargetVendor=  0x05c6
+TargetProduct= 0x6000
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+######################################################## 
+# Vibe 3G Modem 
+#
+# Contributor: Steven James Drinnan
+
+DefaultVendor= 0x1c9e
+DefaultProduct=0x6061
+
+TargetClass=0xff
+
+MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
+
+
+########################################################
+# Vodafone/ZTE K3806-Z
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0013
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0015
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+######################################################## 
+# T-Mobile NL (Huawei E352)
+#
+# Contributor: Alex Hermann
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14fe
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1506
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# Huawei U8220, T-Mobile Pulse (Android smartphone)
+#
+# Contributor: Mobile Stream Team
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1030
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1034
+
+MessageContent="55534243123456780600000080010a11060000000000000000000000000000"
+
+# for Android SDK
+NoDriverLoading=1
+
+
+########################################################
+# D-Link DWM-156 HSUPA 3.75G USB Modem
+#
+# Contributor: Ari Suutari
+
+DefaultVendor= 0x07d1
+DefaultProduct=0xa804
+
+TargetVendor=  0x07d1
+TargetProduct= 0x7e11
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Sony Ericsson MD400G (Rogers)
+#
+# Contributor: Kjartan Adolfsson
+
+DefaultVendor=  0x0fce
+DefaultProduct= 0xd103
+
+TargetClass=    0x02
+
+SonyMode=1
+
+
+########################################################
+# ZTE "ffe" devices 1 (e.g. Cricket A605)
+#
+# Contributor: Matt Eaton
+
+DefaultVendor= 0x19d2
+DefaultProduct=0xffe6
+
+TargetVendor=  0x19d2
+TargetProduct= 0xffe5
+
+MessageContent="5553424330f4cf8124000000800108df200000000000000000000000000000"
+
+
+########################################################
+# ZTE MF190
+#
+# Contributor: Eshwar Andhavarapu
+
+DefaultVendor=  0x19d2
+DefaultProduct= 0x1224
+
+TargetVendor=   0x19d2
+TargetProduct=  0x0082
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+
+########################################################
+# JOA Telecom LM-700r
+
+DefaultVendor= 0x198a
+DefaultProduct=0x0003
+
+TargetVendor=  0x198a
+TargetProduct= 0x0002
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Huawei E173 (Viettel 3G)
+
+TargetVendor=  0x12d1
+TargetProduct= 0x14a8
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14b5
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# C-motech CHU-629S (Variant)
+#
+# Contributor: "wlsloi"
+
+DefaultVendor= 0x16d8
+DefaultProduct=0x700b
+
+TargetClass=0xff
+
+MessageContent="55534243123456782400000080000dfe524445564348473d4e444953000000"
+
+
+########################################################
+# ZTE MF691 (T-Mobile Rocket 2.0)
+#
+# Contributor: Michael Fogel
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1201
+
+TargetVendor=  0x19d2
+TargetProduct= 0x1203
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# ZTE MF192
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1216
+
+TargetVendor=  0x19d2
+TargetProduct= 0x1218
+
+#MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+# Different MessageContent enables cdc_ether interface which is preferable.
+# Thanks to Alex Orlov!
+
+MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
+
+
+########################################################
+# ZTE MF190 (Variant)
+#
+# Contributor: Jean-Baptiste Dubois
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0149
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0124
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+MessageContent3="55534243123456702000000080000c85010101180101010101000000000000"
+
+NeedResponse=1
+
+
+#######################################################
+# Visiontek 82GH 3G
+
+DefaultVendor= 0x230d
+DefaultProduct=0x0007
+
+TargetClass=0xff
+
+Configuration=3
+
+
+#######################################################
+# HP LaserJet Professional P1102
+
+DefaultVendor= 0x03f0
+DefaultProduct=0x002a
+
+TargetClass=0x07
+
+MessageContent="555342431234567800000000000006d0000000000000000000000000000000"
+
+NeedResponse=1
+
+
+#######################################################
+# Mobile Action ("Smart Cable")
+#
+# No success check, device will vanish completely
+
+DefaultVendor= 0x0df7
+DefaultProduct=0x0800
+
+TargetClass=0xff
+
+MobileActionMode=1
+
+NoDriverLoading=1
+
+
+########################################################
+# Vodafone/Huawei K3770
+#
+# Contributor: Alex Chiang
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14d1
+
+TargetVendor=  0x12d1
+TargetProduct= 0x14c9
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# Vodafone/Huawei K3771
+#
+# Contributor: Ben Knight
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14c4
+
+TargetVendor=  0x12d1
+TargetProduct= 0x14ca
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# Option iCon 461
+#
+# Contributor: Samit Basu
+
+DefaultVendor=  0x0af0
+DefaultProduct= 0x7a05
+
+TargetClass=    0xff
+
+MessageContent="55534243123456780000000000000601000000000000000000000000000000"
+
+########################################################
+# ZTE AX226 WiMax
+#
+# may be supported by the Beceem driver
+
+DefaultVendor= 0x19d2
+DefaultProduct=0xbccd
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0172
+
+MessageContent="555342431234567824000000800006bc626563240000000000000000000000"
+
+NoDriverLoading=1
+
+
+########################################################
+# Huawei EC156
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1505
+
+TargetVendor=  0x12d1
+TargetProduct= 0x140b
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# Longcheer SU9800
+
+DefaultVendor= 0x1c9e
+DefaultProduct=0x9800
+
+TargetClass=0xff
+
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# SpeedUp SU-8000U
+
+DefaultVendor= 0x2020
+DefaultProduct=0xf00e
+
+TargetVendor=  0x2020
+TargetProduct= 0x1005
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
 
-;DefaultVendor= 0x16d8
-;DefaultProduct=0x6281
+########################################################
+# Cisco AM10 "Valet Connector"
+#
+# Contributor: David S.
+
+DefaultVendor= 0x1307
+DefaultProduct=0x1169
+
+TargetVendor=  0x13b1
+TargetProduct= 0x0031
+
+CiscoMode=1
+
+
+########################################################
+# Alcatel OT X220L
+#
+# Contributor: Sylvain Gros-Desormeaux
+
+DefaultVendor= 0x1bbb
+DefaultProduct=0xf052
+
+TargetVendor=  0x1bbb
+TargetProduct= 0x0052
+
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# Nokia CS-19
+#
+# Contributor: ThatGuy
+
+DefaultVendor= 0x0421
+DefaultProduct=0x062c
+
+TargetVendor=  0x0421
+TargetProduct= 0x062d
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Huawei ET302
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1d50
+
+Configuration=2
+
+
+########################################################
+# 3GO 3GO11 HSUPA
+
+DefaultVendor= 0x1e89
+DefaultProduct=0xf000
+
+TargetVendor=  0x1e89
+TargetProduct= 0x1a20
+
+MessageContent="5553424312345678800000008000060619181a207000000000000000000000"
+
+
+########################################################
+# Novatel Wireless MC545 HSPA
+
+DefaultVendor= 0x1410
+DefaultProduct=0x5059
+
+TargetVendor=  0x1410
+TargetProduct= 0x7042
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+########################################################
+# ZTE AC682 (a.k.a. SmartFren Connex)
+
+DefaultVendor= 0x19d2
+DefaultProduct=0xffde
+
+TargetVendor=  0x19d2
+TargetProduct= 0xffdd
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# ZTE MF820 4G LTE
+#
+# Contributor: Kenny Lam
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0166
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0167
+
+MessageContent="55534243123456782400000080000685000000240000000000000000000000"
+
+
+########################################################
+# Philips PicoPix 1020 Projector
+#
+# No known driver or application yet
+
+DefaultVendor= 0x1de1
+DefaultProduct=0x1101
+
+TargetVendor=  0x21e7
+TargetProduct= 0x000e
+
+MessageContent="55534243123456780000000000000cff020000000000000000000000000000"
+
+
+########################################################
+# AnyDATA APE-540H
+#
+# Contributor: Robert Gabriel
+
+DefaultVendor= 0x05c6
+DefaultProduct=0x6503
+
+TargetVendor=  0x16d5
+TargetProduct= 0x6502
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# ZTE MF192 (Variant)
+#
+# Contributor: C!chy
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1517
+
+TargetVendor=  0x19d2
+TargetProduct= 0x1519
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+
+########################################################
+# Qisda H21 Flying Beetle
+#
+# Contributor: Chi-Hang Long
+
+DefaultVendor= 0x1da5
+DefaultProduct=0xf000
+
+TargetVendor=  0x1da5
+TargetProduct= 0x4512
+
+QisdaMode=1
+
+
+########################################################
+# C-motech CDU-685a
+#
+# Contributor: Tom Cumming
+
+DefaultVendor= 0x16d8
+DefaultProduct=0x6804
+
+TargetClass=0xff
+
+MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
+
+
+########################################################
+# StrongRising (China Telcom), Air FlexiNet
+
+DefaultVendor= 0x21f5
+DefaultProduct=0x1000
+
+TargetVendor=  0x21f5
+TargetProduct= 0x2008
+
+MessageContent="5553424312345678c000000080000671010000000000000000000000000000
+
+
+########################################################
+# BandRich BandLuxe C339
+
+DefaultVendor= 0x1a8d
+DefaultProduct=0x2000
+
+TargetVendor=  0x1a8d
+TargetProduct= 0x2006
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+
+########################################################
+# Celot CT-680
+
+DefaultVendor= 0x05c6
+DefaultProduct=0x1000
+
+TargetVendor=  0x211f
+TargetProduct= 0x6802
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+#######################################################
+# Huawei E353 (3.se)
+#
+# Contributor: Ulf Eklund
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1f01
+
+TargetVendor=  0x12d1
+TargetProduct= 0x14db
+
+MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
+
+# Driver is cdc_ether
+NoDriverLoading=1
+
+
+########################################################
+# Haier CE682 (EVDO)
+#
+# Contributor: Ebedsat
+
+DefaultVendor= 0x201e
+DefaultProduct=0x1023
+
+TargetVendor=  0x201e
+TargetProduct= 0x1022
+
+MessageContent="55534243123456780000000000000600000000000000000000000000000000"
+MessageContent2="5553424312345679c000000080000671030000000000000000000000000000"
+NeedResponse=1
+
+
+#######################################################
+# LG L-02C LTE
+#
+# Contributor: Yoshiaki Katsumata
+
+DefaultVendor= 0x1004
+DefaultProduct=0x61dd
+
+TargetVendor=  0x1004
+TargetProduct= 0x618f
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+#######################################################
+# LG SD711
+#
+# Contributor: Ryan Jenkins
+
+DefaultVendor= 0x1004
+DefaultProduct=0x61e7
+
+TargetVendor=  0x1004
+TargetProduct= 0x61e6
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# LG L-08C (NTT docomo)
+#
+# Contributor: Shlomi Cohen
+
+DefaultVendor= 0x1004
+DefaultProduct=0x61eb
+
+TargetVendor=  0x1004
+TargetProduct= 0x61ea
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+########################################################
+# I-O Data WMX2-U Wimax
+#
+# Contributor: Shlomi Cohen
+
+DefaultVendor= 0x04bb
+DefaultProduct=0xbccd
+
+TargetVendor=  0x04bb
+TargetProduct= 0x0949
+
+MessageContent="55534243f0298d8124000000800006bc626563240000000000000000000000"
+
+
+########################################################
+# Option GlobeTrotter GI1515
+
+DefaultVendor= 0x0af0
+DefaultProduct=0xd001
+
+TargetVendor=  0x0af0
+TargetProduct= 0xd157
+
+MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+
+
+#######################################################
+# LG L-07A
+#
+# Contributor: Shin Sterneck
+
+DefaultVendor= 0x1004
+DefaultProduct=0x614e
+
+TargetVendor=  0x1004
+TargetProduct= 0x6135
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+######################################################## 
+# ZTE A371B
+#
+# Contributor: Wang Lei
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0169
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0170
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+######################################################## 
+# ZTE MF652
+#
+# Contributor: Björn Andreas Höfer
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1520
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0142
+
+MessageContent="5553424312345679000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+######################################################## 
+# ZTE MF652 (Variant)
+#
+# Contributor: Jackzy
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0146
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0143
+
+MessageContent="5553424312345679000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+########################################################
+# Telenet 3G dongle (T&W WU160)
+#
+# Contributor: Ben Van Mechelen
+
+DefaultVendor= 0x2077
+DefaultProduct=0xf000
+
+TargetVendor=  0x2077
+TargetProduct= 0x9000
+
+MessageContent="5553424308902082000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Nokia CS-21M-02
+#
+# Contributor: Wojciech Wiercho.a, Tore Anderson
+
+DefaultVendor= 0x0421
+DefaultProduct=0x0637
+
+TargetVendor=  0x0421
+TargetProduct= 0x0638
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Telewell TW-3G HSPA+
+#
+# Contributor: Teemu Merikumpu
 
-;TargetClass=0xff
+DefaultVendor= 0x1c9e
+DefaultProduct=0x98ff
 
-;MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
+TargetVendor=  0x1c9e
+TargetProduct= 0x9801
 
+MessageContent="55534243123456780000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# ZTE MF637
+#
+# Contributor: Johannes Hubertz
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0031
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0094
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+########################################################
+# TW-3G HSPA+ 
+#
+# Contributor: Nordic Nurse
+
+DefaultVendor= 0x1c9e 
+DefaultProduct=0x98ff 
+
+TargetVendor=  0x1c9e 
+TargetProduct= 0x9801 
+
+MessageContent="55534243123456780000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# Samsung GT-B1110 
+#
+# Contributor: Spelroth
+
+DefaultVendor= 0x04e8
+DefaultProduct=0x680c
+
+TargetVendor=  0x04e8
+TargetProduct= 0x6792
+
+MessageContent="0902200001010080fa0904000002080650000705010200020007058102000200"
+
+
+########################################################
+# ZTE MF192 (yet annother variant)
+#
+# Contributor: Paul Hedderly
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1514
+
+TargetVendor=  0x19d2
+TargetProduct= 0x1515
+
+MessageContent="5553424348c4758600000000000010ff000000000000000000000000000000"
+
+
+########################################################
+# MediaTek MT6276M
+#
+# Contributor: Meng Zhang
+
+DefaultVendor= 0x0e8d
+DefaultProduct=0x0002
+
+TargetVendor=  0x0e8d
+TargetProductList="00a1,00a2"
+
+MessageContent="555342431234567800000000000006f0010300000000000000000000000000"
+
+
+########################################################
+# Tata Photon+
+#
+# Contributor: Nirbheek Chauhan
+
+DefaultVendor= 0x22f4
+DefaultProduct=0x0021
+
+TargetClass=0xff
+
+MessageContent="555342439f000000000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Option Globetrotter (Variant)
+#
+# Contributor: Roman Samarev
+
+DefaultVendor=  0x0af0
+DefaultProduct= 0x8006
+
+TargetVendor=   0x0af0
+TargetProduct=  0x9100
+
+MessageContent="55534243785634120100000080000601000000000000000000000000000000"
+
+
+####################################################### 
+# Option iCon 711
+#
+# Contributor: Rene Falcon
+
+DefaultVendor= 0x0af0
+DefaultProduct=0x4007
+
+TargetVendor=  0x0af0
+TargetProduct= 0x4005
+
+SierraMode=1
+
+
+####################################################### 
+# Celot K-300
+#
+# Contributor: Jan Vecek
+
+DefaultVendor= 0x05c6
+DefaultProduct=0x1000
+
+TargetVendor=  0x211f
+TargetProduct= 0x6801
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+####################################################### 
+# Hisense E910 EVDO Phone
+#
+# Contributor: Zang MingJie
+
+DefaultVendor= 0x109b 
+DefaultProduct=0xf009
+
+TargetVendor=  0x109b
+TargetProduct= 0x9114
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+NeedResponse=1
+
+
+############################################################################# 
+# Yota Router (Quanta 1QDLZZZ0ST2)
+#
+# Contributor: Ilya Voronin
+
+DefaultVendor= 0x0408
+DefaultProduct=0xf000
+
+TargetVendor=  0x0408
+TargetProduct= 0xd009
+
+MessageContent="5553424312345678000000000000061b004600000000000000000000000000"
+
+
+############################################################################# 
+# K5005 Vodafone/Huawei
+#
+# Contributor: Thomas Schaefer
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14c3
+
+TargetVendor=  0x12d1
+TargetProduct= 0x14c8
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+
+############################################################################# 
+# D-Link DWM-156 (Variant)
+#
+# Contributor: ZML
+
+DefaultVendor= 0x2001 
+DefaultProduct=0xa80b 
+
+TargetVendor=  0x2001 
+TargetProduct= 0x7d00
+
+MessageContent="555342431234567800000000000003f0010100000000000000000000000000"
+
+
+########################################################
+# Huawei E173 (Moviestar)
+#
+# Contributor: Molipha
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x1c24
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1c12
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+########################################################
+# Onda MSA 14.4 (TIM Brasil)
+#
+# Contributor: Rafael Pagliuca
+
+DefaultVendor= 0x1ee8
+DefaultProduct=0x0060
+
+TargetVendor=  0x1ee8
+TargetProduct= 0x005f
+
+MessageContent="555342431234567800000000000008ff000000000000030000000000000000"
+
+
+########################################################
+# Alcatel OT-X220D
+#
+# Contributor: Javier Llorente
+
+DefaultVendor= 0x1bbb
+DefaultProduct=0xf017
+
+TargetVendor=  0x1bbb
+TargetProduct= 0x0017
+
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# Alcatel OT-X080C
+#
+# Contributor: Hicham Haouari
+
+DefaultVendor= 0x1bbb
+DefaultProduct=0x00ca
+
+TargetClass=0xff
+
+MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
+
+
+########################################################
+# TP-Link MA180
+#
+# Contributor: complexgeek
+
+DefaultVendor= 0x2357
+DefaultProduct=0x0200
+
+TargetVendor=  0x2357
+TargetProduct= 0x0201
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# ZTE MF821D
+#
+# Contributor: Thomas Schäfer
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0325
+
+TargetVendor=  0x12d1
+TargetProduct= 0x0326
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+########################################################
+# Dymo LabelManager PnP 
+#
+# Contributor: Kjell M. Myksvoll
+
+DefaultVendor= 0x0922
+DefaultProduct=0x1001
+
+TargetVendor=  0x0922
+TargetProduct= 0x1002
+
+MessageEndpoint= 0x01 
+ResponseEndpoint=0x01 
+
+MessageContent="1b5a01"
+NoDriverLoading=1
+
+
+########################################################
+# Onda MDC655 HSDPA 900/2100 MHz 14.4 Mbps 
+#
+# Contributor: lmctv
+
+DefaultVendor = 0x1ee8
+DefaultProduct =0x004a
+
+TargetVendor =  0x1ee8
+TargetProduct = 0x0049
+
+MessageContent="555342431234567800000000000010ff000000000000000000000000000000"
+
+
+########################################################
+# Vodafone K5006Z (MF821)
+#
+# Contributor: Thomas Schäfer
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x1017
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1018
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+#######################################################
+# Option GI0643 (aka XYFI)
+#
+# Contributor: Amish Chana
+
+DefaultVendor= 0x0af0
+DefaultProduct=0x8700
+
+TargetClass=0xff
+
+MessageContent="55534243785634120100000080000601000000000000000000000000000000" 
+NoDriverLoading=1
+
+
+#######################################################
+# WeTelecom WM-D300
+#
+# Contributor: Viktor Remennik
+
+DefaultVendor= 0x22de
+DefaultProduct=0x6803
+
+TargetVendor=  0x22de
+TargetProduct= 0x6801
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+
+#######################################################
+# China TeleCom CBP7.0
+#
+# Contributor: tricky
+
+DefaultVendor= 0x15eb
+DefaultProduct=0x7153
+
+TargetVendor=  0x15eb
+TargetProduct= 0x7152
+
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+#######################################################
+# Linktop LW272/LW273 (BSNL Teracom)
+#
+# Contributor: Jigish Gohil
+
+DefaultVendor= 0x230d
+DefaultProduct=0x0101
+
+TargetClass=0xff
+
+Configuration=2
+
+
+#######################################################
+# Nokia CS-11
+#
+# Contributor: Alessandro Martins
+
+DefaultVendor= 0x0421
+DefaultProduct=0x061d
+ 
+TargetVendor=  0x0421
+TargetProduct= 0x061e
+ 
+MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
+
+
+#######################################################
+# ZTE MF190 (Variant)
+#
+# Contributor: Radu C
+
+DefaultVendor= 0x19d2
+DefaultProduct=0x0154
+
+TargetVendor=  0x19d2
+TargetProduct= 0x0117
+
+MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
+MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
+
+NeedResponse=1
+
+
+#######################################################
+# Huawei E535
+#
+# Contributor: Andres Septer
+
+DefaultVendor= 0x12d1
+DefaultProduct=0x14fe
+
+TargetVendor=  0x12d1
+TargetProduct= 0x1506
+
+MessageContent="55534243123456780000000000000011062000000100000000000000000000"
+
+
+#######################################################
diff --git a/source/a/usb_modeswitch/usb_modeswitch.SlackBuild b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild
index 67b2070a..e71d6876 100755
--- a/source/a/usb_modeswitch/usb_modeswitch.SlackBuild
+++ b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for usb_modeswitch.
 
-# Copyright 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # Copyright 2010  David Somero, Athens, TN, USA
 # All rights reserved.
 #
@@ -24,9 +24,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=usb_modeswitch
-VERSION=${VERSION:-1.1.6}
-DATAVER=${DATAVER:-20101222}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-1.2.4}
+DATAVER=${DATAVER:-20120812}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -73,11 +73,30 @@ find . \
  -exec chmod 644 {} \;
 
 make clean
-gcc $SLKCFLAGS $LDFLAGS -lusb -Wall -o usb_modeswitch usb_modeswitch.c || exit 1
-
-install -D -s -m 0755 usb_modeswitch $PKG/usr/sbin/usb_modeswitch
-install -D -m 0755 usb_modeswitch.tcl $PKG/lib/udev/usb_modeswitch
-install -D -m 0644 usb_modeswitch.conf $PKG/etc/usb_modeswitch.conf.new
+# "make static" uses the embedded "jim" Tcl interpreter
+make static
+
+install -D -s --mode=755 usb_modeswitch $PKG/usr/sbin/usb_modeswitch
+install -D --mode=755 usb_modeswitch.sh $PKG/lib/udev/usb_modeswitch
+install -D --mode=644 usb_modeswitch.conf $PKG/etc/usb_modeswitch.conf.new
+install -D --mode=644 usb_modeswitch.1 $PKG/usr/man/man1/usb_modeswitch.1
+install -d $PKG/var/lib/usb_modeswitch
+install -D -s --mode=755 usb_modeswitch_dispatcher $PKG/usr/sbin/usb_modeswitch_dispatcher
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
@@ -85,6 +104,10 @@ cp -a \
   $PKG/usr/doc/$PKGNAM-$VERSION
 # http://www.draisberghof.de/usb_modeswitch/device_reference.txt.gz
 cat $CWD/device_reference.txt.gz > $PKG/usr/doc/$PKGNAM-$VERSION/device_reference.txt
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/jim
+cp -a \
+  jim/{AUTHORS,LICENSE,README*} \
+  $PKG/usr/doc/$PKGNAM-$VERSION/jim
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
@@ -105,9 +128,7 @@ find . \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
-install -D -m 0644 40-usb_modeswitch.rules $PKG/lib/udev/rules.d/40-usb_modeswitch.rules
-mkdir -p $PKG/etc
-cp -a usb_modeswitch.d $PKG/etc
+make install DESTDIR=$PKG || exit 1
 mkdir -p $PKG/usr/doc/usb-modeswitch-data-${DATAVER}
 cat ChangeLog | head -n 1000 > $PKG/usr/doc/usb-modeswitch-data-${DATAVER}/ChangeLog
 touch -r ChangeLog $PKG/usr/doc/usb-modeswitch-data-${DATAVER}/ChangeLog
diff --git a/source/a/usbutils/usbutils-002.tar.bz2.sign b/source/a/usbutils/usbutils-002.tar.bz2.sign
deleted file mode 100644
index 9d96e9be..00000000
--- a/source/a/usbutils/usbutils-002.tar.bz2.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNgpmUyGugalF9Dw4RAkkCAJ9AOpNKjFebxdbPfj3LYK+roL7UaACgiKtR
-7L3j4M7iAo15yh6B4WP6uCI=
-=fb1T
------END PGP SIGNATURE-----
diff --git a/source/a/usbutils/usbutils.SlackBuild b/source/a/usbutils/usbutils.SlackBuild
index 163b5378..15694392 100755
--- a/source/a/usbutils/usbutils.SlackBuild
+++ b/source/a/usbutils/usbutils.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-$(echo usbutils-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo usbutils-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j7}
@@ -58,7 +58,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf usbutils-$VERSION
-tar xvf $CWD/usbutils-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/usbutils-$VERSION.tar.xz || exit 1
 cd usbutils-$VERSION || exit 1
 
 chown -R root:root .
@@ -72,19 +72,27 @@ find . \
 rm -f usb.ids*
 wget $(grep 'SRC=' update-usbids.sh.in | cut -d= -f2- | tr -d \")
 
+# Use --datadir=/usr/share/hwdata so usb.ids is expected to be there 
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sbindir=/sbin \
   --mandir=/usr/man \
+  --datadir=/usr/share/hwdata \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Get rid of this redundant file:
-rm -f $PKG/usr/share/usb.ids.gz
+rm -f $PKG/usr/share/hwdata/usb.ids.gz
+
+## Use the usb.ids file shipped with the hwdata package
+#rm -f $PKG/usr/share/hwdata/usb.ids*
+
+# Put a compat symlink in place for stuff that doesn't know about pkgconfig
+ln -s hwdata/usb.ids $PKG/usr/share/usb.ids
 
 # The usbids are kept under /usr, so it makes no sense at all to have
 # this util in /sbin rather than /usr/sbin:
@@ -100,10 +108,6 @@ mv $PKG/sbin/update-usbids.sh $PKG/usr/sbin/update-usbids.sh
 # upstream name available there too...
 ( cd $PKG/sbin ; ln -sf /usr/sbin/update-usbids.sh . )
 
-# Move the pkgconfig directory to @libdir@ instead of @datadir@
-mkdir $PKG/usr/lib${LIBDIRSUFFIX}
-mv $PKG/usr/share/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX}
-
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
diff --git a/source/a/usbutils/usbutils.ids.dest b/source/a/usbutils/usbutils.ids.dest
deleted file mode 100644
index 67111881..00000000
--- a/source/a/usbutils/usbutils.ids.dest
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./update-usbids.sh.orig	2005-01-22 17:03:47.000000000 -0600
-+++ ./update-usbids.sh	2007-01-04 17:14:28.000000000 -0600
-@@ -4,7 +4,7 @@
- 
- set -e
- SRC="http://www.linux-usb.org/usb.ids"
--DEST=usb.ids
-+DEST=/usr/share/usb.ids
- 
- if which wget >/dev/null ; then
- 	DL="wget -O $DEST.new $SRC"
diff --git a/source/a/usbutils/usbutils.url b/source/a/usbutils/usbutils.url
new file mode 100644
index 00000000..57e0013b
--- /dev/null
+++ b/source/a/usbutils/usbutils.url
@@ -0,0 +1 @@
+http://www.kernel.org/pub/linux/utils/usb/usbutils/
diff --git a/source/a/util-linux/0001-mount-old-fix-encryption-usage.patch b/source/a/util-linux/0001-mount-old-fix-encryption-usage.patch
new file mode 100644
index 00000000..afe6e5c9
--- /dev/null
+++ b/source/a/util-linux/0001-mount-old-fix-encryption-usage.patch
@@ -0,0 +1,88 @@
+--- ./mount/mount.c.orig	2012-05-25 04:44:58.993195438 -0500
++++ ./mount/mount.c	2012-08-02 12:04:52.455435631 -0500
+@@ -41,6 +41,7 @@
+ #include "nls.h"
+ #include "blkdev.h"
+ #include "strutils.h"
++#include "xgetpass.h"
+ 
+ #define DO_PS_FIDDLING
+ 
+@@ -1238,6 +1239,8 @@
+   int looptype;
+   uintmax_t offset = 0, sizelimit = 0;
+   struct loopdev_cxt lc;
++  char *pwd = NULL;
++  int ret = EX_FAIL;
+ 
+   /*
+    * In the case of a loop mount, either type is of the form lo@/dev/loop5
+@@ -1317,8 +1320,18 @@
+         return EX_FAIL;
+       }
+ 
++      if (opt_encryption) {
++#ifdef MCL_FUTURE
++        if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
++	  error(_("mount: couldn't lock into memory"));
++          return EX_FAIL;
++	}
++#endif
++	pwd = xgetpass(pfd, _("Password: "));
++      }
++
+       loopcxt_init(&lc, 0);
+-      /* loopcxt_enable_debug(&lc, 1); */
++      /*loopcxt_enable_debug(&lc, 1);*/
+ 
+       if (*loopdev && **loopdev)
+ 	loopcxt_set_device(&lc, *loopdev);	/* use loop=<devname> */
+@@ -1343,6 +1356,8 @@
+ 	  rc = loopcxt_set_offset(&lc, offset);
+ 	if (!rc && sizelimit)
+ 	  rc = loopcxt_set_sizelimit(&lc, sizelimit);
++	if (!rc && opt_encryption && pwd)
++	  loopcxt_set_encryption(&lc, opt_encryption, pwd);
+ 	if (!rc)
+ 	  loopcxt_set_flags(&lc, loop_opts);
+ 
+@@ -1358,8 +1373,7 @@
+ 	  break;	/* success */
+ 
+ 	if (rc != -EBUSY) {
+-	  if (verbose)
+-	    printf(_("mount: failed setting up loop device\n"));
++	  error(_("mount: %s: failed setting up loop device: %m"), *loopfile);
+ 	  if (!opt_loopdev) {
+ 	    my_free(*loopdev);
+ 	    *loopdev = NULL;
+@@ -1399,9 +1413,15 @@
+     }
+   }
+ 
+-  return 0;
++  ret = 0;
+ err:
+-  return EX_FAIL;
++  if (pwd) {
++    char *p = pwd;
++    while (*p)
++      *p++ = '\0';
++    free(pwd);
++  }
++  return ret;
+ }
+ 
+ 
+--- ./mount/Makefile.am.orig	2012-05-25 04:44:58.000000000 -0500
++++ ./mount/Makefile.am	2012-08-02 12:04:14.958439138 -0500
+@@ -23,7 +23,8 @@
+ 		$(top_srcdir)/lib/at.c \
+ 		$(top_srcdir)/lib/sysfs.c \
+ 		$(top_srcdir)/lib/loopdev.c \
+-		$(top_srcdir)/lib/strutils.c
++		$(top_srcdir)/lib/strutils.c \
++		$(top_srcdir)/lib/xgetpass.c
+ 
+ # generic flags for all programs
+ # -- note that pkg-config autoconf macros (pkg.m4) does not differentiate
diff --git a/source/a/util-linux/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch b/source/a/util-linux/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch
new file mode 100644
index 00000000..4d3622c3
--- /dev/null
+++ b/source/a/util-linux/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch
@@ -0,0 +1,31 @@
+--- ./fdisk/fdisk.c.orig	2012-05-25 04:44:58.977195366 -0500
++++ ./fdisk/fdisk.c	2012-08-02 12:00:59.692457377 -0500
+@@ -569,6 +569,19 @@
+ lba_is_aligned(unsigned long long lba)
+ {
+ 	unsigned int granularity = max(phy_sector_size, min_io_size);
++	unsigned long long offset;
++
++	if (grain > granularity)
++		granularity = grain;
++	offset = (lba * sector_size) & (granularity - 1);
++
++	return !((granularity + alignment_offset - offset) & (granularity - 1));
++}
++
++static int
++lba_is_phy_aligned(unsigned long long lba)
++{
++	unsigned int granularity = max(phy_sector_size, min_io_size);
+ 	unsigned long long offset = (lba * sector_size) & (granularity - 1);
+ 
+ 	return !((granularity + alignment_offset - offset) & (granularity - 1));
+@@ -1808,7 +1821,7 @@
+ static void
+ check_alignment(unsigned long long lba, int partition)
+ {
+-	if (!lba_is_aligned(lba))
++	if (!lba_is_phy_aligned(lba))
+ 		printf(_("Partition %i does not start on physical sector boundary.\n"),
+ 			partition + 1);
+ }
diff --git a/source/a/util-linux/adjtimex_1.23-1.diff b/source/a/util-linux/adjtimex_1.23-1.diff
deleted file mode 100644
index 8c250157..00000000
--- a/source/a/util-linux/adjtimex_1.23-1.diff
+++ /dev/null
@@ -1,5456 +0,0 @@
---- adjtimex-1.23.orig/config.sub
-+++ adjtimex-1.23/config.sub
-@@ -0,0 +1,1622 @@
-+#! /bin/sh
-+# Configuration validation subroutine script.
-+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-+#   Inc.
-+
-+timestamp='2007-01-18'
-+
-+# This file is (in principle) common to ALL GNU software.
-+# The presence of a machine in this file suggests that SOME GNU software
-+# can handle that machine.  It does not imply ALL GNU software can.
-+#
-+# This file is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-+# 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+
-+# Please send patches to <config-patches@gnu.org>.  Submit a context
-+# diff and a properly formatted ChangeLog entry.
-+#
-+# Configuration subroutine to validate and canonicalize a configuration type.
-+# Supply the specified configuration type as an argument.
-+# If it is invalid, we print an error message on stderr and exit with code 1.
-+# Otherwise, we print the canonical config type on stdout and succeed.
-+
-+# This file is supposed to be the same for all GNU packages
-+# and recognize all the CPU types, system types and aliases
-+# that are meaningful with *any* GNU software.
-+# Each package is responsible for reporting which valid configurations
-+# it does not support.  The user should be able to distinguish
-+# a failure to support a valid configuration from a meaningless
-+# configuration.
-+
-+# The goal of this file is to map all the various variations of a given
-+# machine specification into a single specification in the form:
-+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-+# or in some cases, the newer four-part form:
-+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-+# It is wrong to echo any other type of specification.
-+
-+me=`echo "$0" | sed -e 's,.*/,,'`
-+
-+usage="\
-+Usage: $0 [OPTION] CPU-MFR-OPSYS
-+       $0 [OPTION] ALIAS
-+
-+Canonicalize a configuration name.
-+
-+Operation modes:
-+  -h, --help         print this help, then exit
-+  -t, --time-stamp   print date of last modification, then exit
-+  -v, --version      print version number, then exit
-+
-+Report bugs and patches to <config-patches@gnu.org>."
-+
-+version="\
-+GNU config.sub ($timestamp)
-+
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-+Free Software Foundation, Inc.
-+
-+This is free software; see the source for copying conditions.  There is NO
-+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-+
-+help="
-+Try \`$me --help' for more information."
-+
-+# Parse command line
-+while test $# -gt 0 ; do
-+  case $1 in
-+    --time-stamp | --time* | -t )
-+       echo "$timestamp" ; exit ;;
-+    --version | -v )
-+       echo "$version" ; exit ;;
-+    --help | --h* | -h )
-+       echo "$usage"; exit ;;
-+    -- )     # Stop option processing
-+       shift; break ;;
-+    - )	# Use stdin as input.
-+       break ;;
-+    -* )
-+       echo "$me: invalid option $1$help"
-+       exit 1 ;;
-+
-+    *local*)
-+       # First pass through any local machine types.
-+       echo $1
-+       exit ;;
-+
-+    * )
-+       break ;;
-+  esac
-+done
-+
-+case $# in
-+ 0) echo "$me: missing argument$help" >&2
-+    exit 1;;
-+ 1) ;;
-+ *) echo "$me: too many arguments$help" >&2
-+    exit 1;;
-+esac
-+
-+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-+# Here we must recognize all the valid KERNEL-OS combinations.
-+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-+case $maybe_os in
-+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-+  storm-chaos* | os2-emx* | rtmk-nova*)
-+    os=-$maybe_os
-+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-+    ;;
-+  *)
-+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-+    if [ $basic_machine != $1 ]
-+    then os=`echo $1 | sed 's/.*-/-/'`
-+    else os=; fi
-+    ;;
-+esac
-+
-+### Let's recognize common machines as not being operating systems so
-+### that things like config.sub decstation-3100 work.  We also
-+### recognize some manufacturers as not being operating systems, so we
-+### can provide default operating systems below.
-+case $os in
-+	-sun*os*)
-+		# Prevent following clause from handling this invalid input.
-+		;;
-+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-+	-apple | -axis | -knuth | -cray)
-+		os=
-+		basic_machine=$1
-+		;;
-+	-sim | -cisco | -oki | -wec | -winbond)
-+		os=
-+		basic_machine=$1
-+		;;
-+	-scout)
-+		;;
-+	-wrs)
-+		os=-vxworks
-+		basic_machine=$1
-+		;;
-+	-chorusos*)
-+		os=-chorusos
-+		basic_machine=$1
-+		;;
-+ 	-chorusrdb)
-+ 		os=-chorusrdb
-+		basic_machine=$1
-+ 		;;
-+	-hiux*)
-+		os=-hiuxwe2
-+		;;
-+	-sco6)
-+		os=-sco5v6
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco5)
-+		os=-sco3.2v5
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco4)
-+		os=-sco3.2v4
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco3.2.[4-9]*)
-+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco3.2v[4-9]*)
-+		# Don't forget version if it is 3.2v4 or newer.
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco5v6*)
-+		# Don't forget version if it is 3.2v4 or newer.
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-sco*)
-+		os=-sco3.2v2
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-udk*)
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-isc)
-+		os=-isc2.2
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-clix*)
-+		basic_machine=clipper-intergraph
-+		;;
-+	-isc*)
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-+		;;
-+	-lynx*)
-+		os=-lynxos
-+		;;
-+	-ptx*)
-+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-+		;;
-+	-windowsnt*)
-+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-+		;;
-+	-psos*)
-+		os=-psos
-+		;;
-+	-mint | -mint[0-9]*)
-+		basic_machine=m68k-atari
-+		os=-mint
-+		;;
-+esac
-+
-+# Decode aliases for certain CPU-COMPANY combinations.
-+case $basic_machine in
-+	# Recognize the basic CPU types without company name.
-+	# Some are omitted here because they have special meanings below.
-+	1750a | 580 \
-+	| a29k \
-+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-+	| am33_2.0 \
-+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-+	| bfin \
-+	| c4x | clipper \
-+	| d10v | d30v | dlx | dsp16xx \
-+	| fido | fr30 | frv \
-+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-+	| i370 | i860 | i960 | ia64 \
-+	| ip2k | iq2000 \
-+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-+	| maxq | mb | microblaze | mcore | mep \
-+	| mips | mipsbe | mipseb | mipsel | mipsle \
-+	| mips16 \
-+	| mips64 | mips64el \
-+	| mips64vr | mips64vrel \
-+	| mips64orion | mips64orionel \
-+	| mips64vr4100 | mips64vr4100el \
-+	| mips64vr4300 | mips64vr4300el \
-+	| mips64vr5000 | mips64vr5000el \
-+	| mips64vr5900 | mips64vr5900el \
-+	| mipsisa32 | mipsisa32el \
-+	| mipsisa32r2 | mipsisa32r2el \
-+	| mipsisa64 | mipsisa64el \
-+	| mipsisa64r2 | mipsisa64r2el \
-+	| mipsisa64sb1 | mipsisa64sb1el \
-+	| mipsisa64sr71k | mipsisa64sr71kel \
-+	| mipstx39 | mipstx39el \
-+	| mn10200 | mn10300 \
-+	| mt \
-+	| msp430 \
-+	| nios | nios2 \
-+	| ns16k | ns32k \
-+	| or32 \
-+	| pdp10 | pdp11 | pj | pjl \
-+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-+	| pyramid \
-+	| score \
-+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-+	| sh64 | sh64le \
-+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-+	| spu | strongarm \
-+	| tahoe | thumb | tic4x | tic80 | tron \
-+	| v850 | v850e \
-+	| we32k \
-+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-+	| z8k)
-+		basic_machine=$basic_machine-unknown
-+		;;
-+	m6811 | m68hc11 | m6812 | m68hc12)
-+		# Motorola 68HC11/12.
-+		basic_machine=$basic_machine-unknown
-+		os=-none
-+		;;
-+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-+		;;
-+	ms1)
-+		basic_machine=mt-unknown
-+		;;
-+
-+	# We use `pc' rather than `unknown'
-+	# because (1) that's what they normally are, and
-+	# (2) the word "unknown" tends to confuse beginning users.
-+	i*86 | x86_64)
-+	  basic_machine=$basic_machine-pc
-+	  ;;
-+	# Object if more than one company name word.
-+	*-*-*)
-+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-+		exit 1
-+		;;
-+	# Recognize the basic CPU types with company name.
-+	580-* \
-+	| a29k-* \
-+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-+	| avr-* | avr32-* \
-+	| bfin-* | bs2000-* \
-+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-+	| clipper-* | craynv-* | cydra-* \
-+	| d10v-* | d30v-* | dlx-* \
-+	| elxsi-* \
-+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-+	| h8300-* | h8500-* \
-+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-+	| i*86-* | i860-* | i960-* | ia64-* \
-+	| ip2k-* | iq2000-* \
-+	| m32c-* | m32r-* | m32rle-* \
-+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-+	| m88110-* | m88k-* | maxq-* | mcore-* \
-+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-+	| mips16-* \
-+	| mips64-* | mips64el-* \
-+	| mips64vr-* | mips64vrel-* \
-+	| mips64orion-* | mips64orionel-* \
-+	| mips64vr4100-* | mips64vr4100el-* \
-+	| mips64vr4300-* | mips64vr4300el-* \
-+	| mips64vr5000-* | mips64vr5000el-* \
-+	| mips64vr5900-* | mips64vr5900el-* \
-+	| mipsisa32-* | mipsisa32el-* \
-+	| mipsisa32r2-* | mipsisa32r2el-* \
-+	| mipsisa64-* | mipsisa64el-* \
-+	| mipsisa64r2-* | mipsisa64r2el-* \
-+	| mipsisa64sb1-* | mipsisa64sb1el-* \
-+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-+	| mipstx39-* | mipstx39el-* \
-+	| mmix-* \
-+	| mt-* \
-+	| msp430-* \
-+	| nios-* | nios2-* \
-+	| none-* | np1-* | ns16k-* | ns32k-* \
-+	| orion-* \
-+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-+	| pyramid-* \
-+	| romp-* | rs6000-* \
-+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-+	| sparclite-* \
-+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-+	| tahoe-* | thumb-* \
-+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-+	| tron-* \
-+	| v850-* | v850e-* | vax-* \
-+	| we32k-* \
-+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-+	| xstormy16-* | xtensa-* \
-+	| ymp-* \
-+	| z8k-*)
-+		;;
-+	# Recognize the various machine names and aliases which stand
-+	# for a CPU type and a company and sometimes even an OS.
-+	386bsd)
-+		basic_machine=i386-unknown
-+		os=-bsd
-+		;;
-+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-+		basic_machine=m68000-att
-+		;;
-+	3b*)
-+		basic_machine=we32k-att
-+		;;
-+	a29khif)
-+		basic_machine=a29k-amd
-+		os=-udi
-+		;;
-+    	abacus)
-+		basic_machine=abacus-unknown
-+		;;
-+	adobe68k)
-+		basic_machine=m68010-adobe
-+		os=-scout
-+		;;
-+	alliant | fx80)
-+		basic_machine=fx80-alliant
-+		;;
-+	altos | altos3068)
-+		basic_machine=m68k-altos
-+		;;
-+	am29k)
-+		basic_machine=a29k-none
-+		os=-bsd
-+		;;
-+	amd64)
-+		basic_machine=x86_64-pc
-+		;;
-+	amd64-*)
-+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	amdahl)
-+		basic_machine=580-amdahl
-+		os=-sysv
-+		;;
-+	amiga | amiga-*)
-+		basic_machine=m68k-unknown
-+		;;
-+	amigaos | amigados)
-+		basic_machine=m68k-unknown
-+		os=-amigaos
-+		;;
-+	amigaunix | amix)
-+		basic_machine=m68k-unknown
-+		os=-sysv4
-+		;;
-+	apollo68)
-+		basic_machine=m68k-apollo
-+		os=-sysv
-+		;;
-+	apollo68bsd)
-+		basic_machine=m68k-apollo
-+		os=-bsd
-+		;;
-+	aux)
-+		basic_machine=m68k-apple
-+		os=-aux
-+		;;
-+	balance)
-+		basic_machine=ns32k-sequent
-+		os=-dynix
-+		;;
-+	c90)
-+		basic_machine=c90-cray
-+		os=-unicos
-+		;;
-+	convex-c1)
-+		basic_machine=c1-convex
-+		os=-bsd
-+		;;
-+	convex-c2)
-+		basic_machine=c2-convex
-+		os=-bsd
-+		;;
-+	convex-c32)
-+		basic_machine=c32-convex
-+		os=-bsd
-+		;;
-+	convex-c34)
-+		basic_machine=c34-convex
-+		os=-bsd
-+		;;
-+	convex-c38)
-+		basic_machine=c38-convex
-+		os=-bsd
-+		;;
-+	cray | j90)
-+		basic_machine=j90-cray
-+		os=-unicos
-+		;;
-+	craynv)
-+		basic_machine=craynv-cray
-+		os=-unicosmp
-+		;;
-+	cr16c)
-+		basic_machine=cr16c-unknown
-+		os=-elf
-+		;;
-+	crds | unos)
-+		basic_machine=m68k-crds
-+		;;
-+	crisv32 | crisv32-* | etraxfs*)
-+		basic_machine=crisv32-axis
-+		;;
-+	cris | cris-* | etrax*)
-+		basic_machine=cris-axis
-+		;;
-+	crx)
-+		basic_machine=crx-unknown
-+		os=-elf
-+		;;
-+	da30 | da30-*)
-+		basic_machine=m68k-da30
-+		;;
-+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-+		basic_machine=mips-dec
-+		;;
-+	decsystem10* | dec10*)
-+		basic_machine=pdp10-dec
-+		os=-tops10
-+		;;
-+	decsystem20* | dec20*)
-+		basic_machine=pdp10-dec
-+		os=-tops20
-+		;;
-+	delta | 3300 | motorola-3300 | motorola-delta \
-+	      | 3300-motorola | delta-motorola)
-+		basic_machine=m68k-motorola
-+		;;
-+	delta88)
-+		basic_machine=m88k-motorola
-+		os=-sysv3
-+		;;
-+	djgpp)
-+		basic_machine=i586-pc
-+		os=-msdosdjgpp
-+		;;
-+	dpx20 | dpx20-*)
-+		basic_machine=rs6000-bull
-+		os=-bosx
-+		;;
-+	dpx2* | dpx2*-bull)
-+		basic_machine=m68k-bull
-+		os=-sysv3
-+		;;
-+	ebmon29k)
-+		basic_machine=a29k-amd
-+		os=-ebmon
-+		;;
-+	elxsi)
-+		basic_machine=elxsi-elxsi
-+		os=-bsd
-+		;;
-+	encore | umax | mmax)
-+		basic_machine=ns32k-encore
-+		;;
-+	es1800 | OSE68k | ose68k | ose | OSE)
-+		basic_machine=m68k-ericsson
-+		os=-ose
-+		;;
-+	fx2800)
-+		basic_machine=i860-alliant
-+		;;
-+	genix)
-+		basic_machine=ns32k-ns
-+		;;
-+	gmicro)
-+		basic_machine=tron-gmicro
-+		os=-sysv
-+		;;
-+	go32)
-+		basic_machine=i386-pc
-+		os=-go32
-+		;;
-+	h3050r* | hiux*)
-+		basic_machine=hppa1.1-hitachi
-+		os=-hiuxwe2
-+		;;
-+	h8300hms)
-+		basic_machine=h8300-hitachi
-+		os=-hms
-+		;;
-+	h8300xray)
-+		basic_machine=h8300-hitachi
-+		os=-xray
-+		;;
-+	h8500hms)
-+		basic_machine=h8500-hitachi
-+		os=-hms
-+		;;
-+	harris)
-+		basic_machine=m88k-harris
-+		os=-sysv3
-+		;;
-+	hp300-*)
-+		basic_machine=m68k-hp
-+		;;
-+	hp300bsd)
-+		basic_machine=m68k-hp
-+		os=-bsd
-+		;;
-+	hp300hpux)
-+		basic_machine=m68k-hp
-+		os=-hpux
-+		;;
-+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-+		basic_machine=hppa1.0-hp
-+		;;
-+	hp9k2[0-9][0-9] | hp9k31[0-9])
-+		basic_machine=m68000-hp
-+		;;
-+	hp9k3[2-9][0-9])
-+		basic_machine=m68k-hp
-+		;;
-+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-+		basic_machine=hppa1.0-hp
-+		;;
-+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-+		basic_machine=hppa1.1-hp
-+		;;
-+	hp9k78[0-9] | hp78[0-9])
-+		# FIXME: really hppa2.0-hp
-+		basic_machine=hppa1.1-hp
-+		;;
-+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-+		# FIXME: really hppa2.0-hp
-+		basic_machine=hppa1.1-hp
-+		;;
-+	hp9k8[0-9][13679] | hp8[0-9][13679])
-+		basic_machine=hppa1.1-hp
-+		;;
-+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-+		basic_machine=hppa1.0-hp
-+		;;
-+	hppa-next)
-+		os=-nextstep3
-+		;;
-+	hppaosf)
-+		basic_machine=hppa1.1-hp
-+		os=-osf
-+		;;
-+	hppro)
-+		basic_machine=hppa1.1-hp
-+		os=-proelf
-+		;;
-+	i370-ibm* | ibm*)
-+		basic_machine=i370-ibm
-+		;;
-+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-+	i*86v32)
-+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-+		os=-sysv32
-+		;;
-+	i*86v4*)
-+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-+		os=-sysv4
-+		;;
-+	i*86v)
-+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-+		os=-sysv
-+		;;
-+	i*86sol2)
-+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-+		os=-solaris2
-+		;;
-+	i386mach)
-+		basic_machine=i386-mach
-+		os=-mach
-+		;;
-+	i386-vsta | vsta)
-+		basic_machine=i386-unknown
-+		os=-vsta
-+		;;
-+	iris | iris4d)
-+		basic_machine=mips-sgi
-+		case $os in
-+		    -irix*)
-+			;;
-+		    *)
-+			os=-irix4
-+			;;
-+		esac
-+		;;
-+	isi68 | isi)
-+		basic_machine=m68k-isi
-+		os=-sysv
-+		;;
-+	m88k-omron*)
-+		basic_machine=m88k-omron
-+		;;
-+	magnum | m3230)
-+		basic_machine=mips-mips
-+		os=-sysv
-+		;;
-+	merlin)
-+		basic_machine=ns32k-utek
-+		os=-sysv
-+		;;
-+	mingw32)
-+		basic_machine=i386-pc
-+		os=-mingw32
-+		;;
-+	miniframe)
-+		basic_machine=m68000-convergent
-+		;;
-+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-+		basic_machine=m68k-atari
-+		os=-mint
-+		;;
-+	mips3*-*)
-+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-+		;;
-+	mips3*)
-+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-+		;;
-+	monitor)
-+		basic_machine=m68k-rom68k
-+		os=-coff
-+		;;
-+	morphos)
-+		basic_machine=powerpc-unknown
-+		os=-morphos
-+		;;
-+	msdos)
-+		basic_machine=i386-pc
-+		os=-msdos
-+		;;
-+	ms1-*)
-+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-+		;;
-+	mvs)
-+		basic_machine=i370-ibm
-+		os=-mvs
-+		;;
-+	ncr3000)
-+		basic_machine=i486-ncr
-+		os=-sysv4
-+		;;
-+	netbsd386)
-+		basic_machine=i386-unknown
-+		os=-netbsd
-+		;;
-+	netwinder)
-+		basic_machine=armv4l-rebel
-+		os=-linux
-+		;;
-+	news | news700 | news800 | news900)
-+		basic_machine=m68k-sony
-+		os=-newsos
-+		;;
-+	news1000)
-+		basic_machine=m68030-sony
-+		os=-newsos
-+		;;
-+	news-3600 | risc-news)
-+		basic_machine=mips-sony
-+		os=-newsos
-+		;;
-+	necv70)
-+		basic_machine=v70-nec
-+		os=-sysv
-+		;;
-+	next | m*-next )
-+		basic_machine=m68k-next
-+		case $os in
-+		    -nextstep* )
-+			;;
-+		    -ns2*)
-+		      os=-nextstep2
-+			;;
-+		    *)
-+		      os=-nextstep3
-+			;;
-+		esac
-+		;;
-+	nh3000)
-+		basic_machine=m68k-harris
-+		os=-cxux
-+		;;
-+	nh[45]000)
-+		basic_machine=m88k-harris
-+		os=-cxux
-+		;;
-+	nindy960)
-+		basic_machine=i960-intel
-+		os=-nindy
-+		;;
-+	mon960)
-+		basic_machine=i960-intel
-+		os=-mon960
-+		;;
-+	nonstopux)
-+		basic_machine=mips-compaq
-+		os=-nonstopux
-+		;;
-+	np1)
-+		basic_machine=np1-gould
-+		;;
-+	nsr-tandem)
-+		basic_machine=nsr-tandem
-+		;;
-+	op50n-* | op60c-*)
-+		basic_machine=hppa1.1-oki
-+		os=-proelf
-+		;;
-+	openrisc | openrisc-*)
-+		basic_machine=or32-unknown
-+		;;
-+	os400)
-+		basic_machine=powerpc-ibm
-+		os=-os400
-+		;;
-+	OSE68000 | ose68000)
-+		basic_machine=m68000-ericsson
-+		os=-ose
-+		;;
-+	os68k)
-+		basic_machine=m68k-none
-+		os=-os68k
-+		;;
-+	pa-hitachi)
-+		basic_machine=hppa1.1-hitachi
-+		os=-hiuxwe2
-+		;;
-+	paragon)
-+		basic_machine=i860-intel
-+		os=-osf
-+		;;
-+	pbd)
-+		basic_machine=sparc-tti
-+		;;
-+	pbb)
-+		basic_machine=m68k-tti
-+		;;
-+	pc532 | pc532-*)
-+		basic_machine=ns32k-pc532
-+		;;
-+	pc98)
-+		basic_machine=i386-pc
-+		;;
-+	pc98-*)
-+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	pentium | p5 | k5 | k6 | nexgen | viac3)
-+		basic_machine=i586-pc
-+		;;
-+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-+		basic_machine=i686-pc
-+		;;
-+	pentiumii | pentium2 | pentiumiii | pentium3)
-+		basic_machine=i686-pc
-+		;;
-+	pentium4)
-+		basic_machine=i786-pc
-+		;;
-+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	pentium4-*)
-+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	pn)
-+		basic_machine=pn-gould
-+		;;
-+	power)	basic_machine=power-ibm
-+		;;
-+	ppc)	basic_machine=powerpc-unknown
-+		;;
-+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	ppcle | powerpclittle | ppc-le | powerpc-little)
-+		basic_machine=powerpcle-unknown
-+		;;
-+	ppcle-* | powerpclittle-*)
-+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	ppc64)	basic_machine=powerpc64-unknown
-+		;;
-+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-+		basic_machine=powerpc64le-unknown
-+		;;
-+	ppc64le-* | powerpc64little-*)
-+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-+		;;
-+	ps2)
-+		basic_machine=i386-ibm
-+		;;
-+	pw32)
-+		basic_machine=i586-unknown
-+		os=-pw32
-+		;;
-+	rdos)
-+		basic_machine=i386-pc
-+		os=-rdos
-+		;;
-+	rom68k)
-+		basic_machine=m68k-rom68k
-+		os=-coff
-+		;;
-+	rm[46]00)
-+		basic_machine=mips-siemens
-+		;;
-+	rtpc | rtpc-*)
-+		basic_machine=romp-ibm
-+		;;
-+	s390 | s390-*)
-+		basic_machine=s390-ibm
-+		;;
-+	s390x | s390x-*)
-+		basic_machine=s390x-ibm
-+		;;
-+	sa29200)
-+		basic_machine=a29k-amd
-+		os=-udi
-+		;;
-+	sb1)
-+		basic_machine=mipsisa64sb1-unknown
-+		;;
-+	sb1el)
-+		basic_machine=mipsisa64sb1el-unknown
-+		;;
-+	sde)
-+		basic_machine=mipsisa32-sde
-+		os=-elf
-+		;;
-+	sei)
-+		basic_machine=mips-sei
-+		os=-seiux
-+		;;
-+	sequent)
-+		basic_machine=i386-sequent
-+		;;
-+	sh)
-+		basic_machine=sh-hitachi
-+		os=-hms
-+		;;
-+	sh5el)
-+		basic_machine=sh5le-unknown
-+		;;
-+	sh64)
-+		basic_machine=sh64-unknown
-+		;;
-+	sparclite-wrs | simso-wrs)
-+		basic_machine=sparclite-wrs
-+		os=-vxworks
-+		;;
-+	sps7)
-+		basic_machine=m68k-bull
-+		os=-sysv2
-+		;;
-+	spur)
-+		basic_machine=spur-unknown
-+		;;
-+	st2000)
-+		basic_machine=m68k-tandem
-+		;;
-+	stratus)
-+		basic_machine=i860-stratus
-+		os=-sysv4
-+		;;
-+	sun2)
-+		basic_machine=m68000-sun
-+		;;
-+	sun2os3)
-+		basic_machine=m68000-sun
-+		os=-sunos3
-+		;;
-+	sun2os4)
-+		basic_machine=m68000-sun
-+		os=-sunos4
-+		;;
-+	sun3os3)
-+		basic_machine=m68k-sun
-+		os=-sunos3
-+		;;
-+	sun3os4)
-+		basic_machine=m68k-sun
-+		os=-sunos4
-+		;;
-+	sun4os3)
-+		basic_machine=sparc-sun
-+		os=-sunos3
-+		;;
-+	sun4os4)
-+		basic_machine=sparc-sun
-+		os=-sunos4
-+		;;
-+	sun4sol2)
-+		basic_machine=sparc-sun
-+		os=-solaris2
-+		;;
-+	sun3 | sun3-*)
-+		basic_machine=m68k-sun
-+		;;
-+	sun4)
-+		basic_machine=sparc-sun
-+		;;
-+	sun386 | sun386i | roadrunner)
-+		basic_machine=i386-sun
-+		;;
-+	sv1)
-+		basic_machine=sv1-cray
-+		os=-unicos
-+		;;
-+	symmetry)
-+		basic_machine=i386-sequent
-+		os=-dynix
-+		;;
-+	t3e)
-+		basic_machine=alphaev5-cray
-+		os=-unicos
-+		;;
-+	t90)
-+		basic_machine=t90-cray
-+		os=-unicos
-+		;;
-+	tic54x | c54x*)
-+		basic_machine=tic54x-unknown
-+		os=-coff
-+		;;
-+	tic55x | c55x*)
-+		basic_machine=tic55x-unknown
-+		os=-coff
-+		;;
-+	tic6x | c6x*)
-+		basic_machine=tic6x-unknown
-+		os=-coff
-+		;;
-+	tx39)
-+		basic_machine=mipstx39-unknown
-+		;;
-+	tx39el)
-+		basic_machine=mipstx39el-unknown
-+		;;
-+	toad1)
-+		basic_machine=pdp10-xkl
-+		os=-tops20
-+		;;
-+	tower | tower-32)
-+		basic_machine=m68k-ncr
-+		;;
-+	tpf)
-+		basic_machine=s390x-ibm
-+		os=-tpf
-+		;;
-+	udi29k)
-+		basic_machine=a29k-amd
-+		os=-udi
-+		;;
-+	ultra3)
-+		basic_machine=a29k-nyu
-+		os=-sym1
-+		;;
-+	v810 | necv810)
-+		basic_machine=v810-nec
-+		os=-none
-+		;;
-+	vaxv)
-+		basic_machine=vax-dec
-+		os=-sysv
-+		;;
-+	vms)
-+		basic_machine=vax-dec
-+		os=-vms
-+		;;
-+	vpp*|vx|vx-*)
-+		basic_machine=f301-fujitsu
-+		;;
-+	vxworks960)
-+		basic_machine=i960-wrs
-+		os=-vxworks
-+		;;
-+	vxworks68)
-+		basic_machine=m68k-wrs
-+		os=-vxworks
-+		;;
-+	vxworks29k)
-+		basic_machine=a29k-wrs
-+		os=-vxworks
-+		;;
-+	w65*)
-+		basic_machine=w65-wdc
-+		os=-none
-+		;;
-+	w89k-*)
-+		basic_machine=hppa1.1-winbond
-+		os=-proelf
-+		;;
-+	xbox)
-+		basic_machine=i686-pc
-+		os=-mingw32
-+		;;
-+	xps | xps100)
-+		basic_machine=xps100-honeywell
-+		;;
-+	ymp)
-+		basic_machine=ymp-cray
-+		os=-unicos
-+		;;
-+	z8k-*-coff)
-+		basic_machine=z8k-unknown
-+		os=-sim
-+		;;
-+	none)
-+		basic_machine=none-none
-+		os=-none
-+		;;
-+
-+# Here we handle the default manufacturer of certain CPU types.  It is in
-+# some cases the only manufacturer, in others, it is the most popular.
-+	w89k)
-+		basic_machine=hppa1.1-winbond
-+		;;
-+	op50n)
-+		basic_machine=hppa1.1-oki
-+		;;
-+	op60c)
-+		basic_machine=hppa1.1-oki
-+		;;
-+	romp)
-+		basic_machine=romp-ibm
-+		;;
-+	mmix)
-+		basic_machine=mmix-knuth
-+		;;
-+	rs6000)
-+		basic_machine=rs6000-ibm
-+		;;
-+	vax)
-+		basic_machine=vax-dec
-+		;;
-+	pdp10)
-+		# there are many clones, so DEC is not a safe bet
-+		basic_machine=pdp10-unknown
-+		;;
-+	pdp11)
-+		basic_machine=pdp11-dec
-+		;;
-+	we32k)
-+		basic_machine=we32k-att
-+		;;
-+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
-+		basic_machine=sh-unknown
-+		;;
-+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-+		basic_machine=sparc-sun
-+		;;
-+	cydra)
-+		basic_machine=cydra-cydrome
-+		;;
-+	orion)
-+		basic_machine=orion-highlevel
-+		;;
-+	orion105)
-+		basic_machine=clipper-highlevel
-+		;;
-+	mac | mpw | mac-mpw)
-+		basic_machine=m68k-apple
-+		;;
-+	pmac | pmac-mpw)
-+		basic_machine=powerpc-apple
-+		;;
-+	*-unknown)
-+		# Make sure to match an already-canonicalized machine name.
-+		;;
-+	*)
-+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-+		exit 1
-+		;;
-+esac
-+
-+# Here we canonicalize certain aliases for manufacturers.
-+case $basic_machine in
-+	*-digital*)
-+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-+		;;
-+	*-commodore*)
-+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-+		;;
-+	*)
-+		;;
-+esac
-+
-+# Decode manufacturer-specific aliases for certain operating systems.
-+
-+if [ x"$os" != x"" ]
-+then
-+case $os in
-+        # First match some system type aliases
-+        # that might get confused with valid system types.
-+	# -solaris* is a basic system type, with this one exception.
-+	-solaris1 | -solaris1.*)
-+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-+		;;
-+	-solaris)
-+		os=-solaris2
-+		;;
-+	-svr4*)
-+		os=-sysv4
-+		;;
-+	-unixware*)
-+		os=-sysv4.2uw
-+		;;
-+	-gnu/linux*)
-+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-+		;;
-+	# First accept the basic system types.
-+	# The portable systems comes first.
-+	# Each alternative MUST END IN A *, to match a version number.
-+	# -sysv* is not here because it comes later, after sysvr4.
-+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-+	      | -aos* \
-+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-+	      | -openbsd* | -solidbsd* \
-+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-+	      | -chorusos* | -chorusrdb* \
-+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-+	      | -uxpv* | -beos* | -mpeix* | -udk* \
-+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
-+	# Remember, each alternative MUST END IN *, to match a version number.
-+		;;
-+	-qnx*)
-+		case $basic_machine in
-+		    x86-* | i*86-*)
-+			;;
-+		    *)
-+			os=-nto$os
-+			;;
-+		esac
-+		;;
-+	-nto-qnx*)
-+		;;
-+	-nto*)
-+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-+		;;
-+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-+		;;
-+	-mac*)
-+		os=`echo $os | sed -e 's|mac|macos|'`
-+		;;
-+	-linux-dietlibc)
-+		os=-linux-dietlibc
-+		;;
-+	-linux*)
-+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-+		;;
-+	-sunos5*)
-+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-+		;;
-+	-sunos6*)
-+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-+		;;
-+	-opened*)
-+		os=-openedition
-+		;;
-+        -os400*)
-+		os=-os400
-+		;;
-+	-wince*)
-+		os=-wince
-+		;;
-+	-osfrose*)
-+		os=-osfrose
-+		;;
-+	-osf*)
-+		os=-osf
-+		;;
-+	-utek*)
-+		os=-bsd
-+		;;
-+	-dynix*)
-+		os=-bsd
-+		;;
-+	-acis*)
-+		os=-aos
-+		;;
-+	-atheos*)
-+		os=-atheos
-+		;;
-+	-syllable*)
-+		os=-syllable
-+		;;
-+	-386bsd)
-+		os=-bsd
-+		;;
-+	-ctix* | -uts*)
-+		os=-sysv
-+		;;
-+	-nova*)
-+		os=-rtmk-nova
-+		;;
-+	-ns2 )
-+		os=-nextstep2
-+		;;
-+	-nsk*)
-+		os=-nsk
-+		;;
-+	# Preserve the version number of sinix5.
-+	-sinix5.*)
-+		os=`echo $os | sed -e 's|sinix|sysv|'`
-+		;;
-+	-sinix*)
-+		os=-sysv4
-+		;;
-+        -tpf*)
-+		os=-tpf
-+		;;
-+	-triton*)
-+		os=-sysv3
-+		;;
-+	-oss*)
-+		os=-sysv3
-+		;;
-+	-svr4)
-+		os=-sysv4
-+		;;
-+	-svr3)
-+		os=-sysv3
-+		;;
-+	-sysvr4)
-+		os=-sysv4
-+		;;
-+	# This must come after -sysvr4.
-+	-sysv*)
-+		;;
-+	-ose*)
-+		os=-ose
-+		;;
-+	-es1800*)
-+		os=-ose
-+		;;
-+	-xenix)
-+		os=-xenix
-+		;;
-+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-+		os=-mint
-+		;;
-+	-aros*)
-+		os=-aros
-+		;;
-+	-kaos*)
-+		os=-kaos
-+		;;
-+	-zvmoe)
-+		os=-zvmoe
-+		;;
-+	-none)
-+		;;
-+	*)
-+		# Get rid of the `-' at the beginning of $os.
-+		os=`echo $os | sed 's/[^-]*-//'`
-+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-+		exit 1
-+		;;
-+esac
-+else
-+
-+# Here we handle the default operating systems that come with various machines.
-+# The value should be what the vendor currently ships out the door with their
-+# machine or put another way, the most popular os provided with the machine.
-+
-+# Note that if you're going to try to match "-MANUFACTURER" here (say,
-+# "-sun"), then you have to tell the case statement up towards the top
-+# that MANUFACTURER isn't an operating system.  Otherwise, code above
-+# will signal an error saying that MANUFACTURER isn't an operating
-+# system, and we'll never get to this point.
-+
-+case $basic_machine in
-+        score-*)
-+		os=-elf
-+		;;
-+        spu-*)
-+		os=-elf
-+		;;
-+	*-acorn)
-+		os=-riscix1.2
-+		;;
-+	arm*-rebel)
-+		os=-linux
-+		;;
-+	arm*-semi)
-+		os=-aout
-+		;;
-+        c4x-* | tic4x-*)
-+        	os=-coff
-+		;;
-+	# This must come before the *-dec entry.
-+	pdp10-*)
-+		os=-tops20
-+		;;
-+	pdp11-*)
-+		os=-none
-+		;;
-+	*-dec | vax-*)
-+		os=-ultrix4.2
-+		;;
-+	m68*-apollo)
-+		os=-domain
-+		;;
-+	i386-sun)
-+		os=-sunos4.0.2
-+		;;
-+	m68000-sun)
-+		os=-sunos3
-+		# This also exists in the configure program, but was not the
-+		# default.
-+		# os=-sunos4
-+		;;
-+	m68*-cisco)
-+		os=-aout
-+		;;
-+        mep-*)
-+		os=-elf
-+		;;
-+	mips*-cisco)
-+		os=-elf
-+		;;
-+	mips*-*)
-+		os=-elf
-+		;;
-+	or32-*)
-+		os=-coff
-+		;;
-+	*-tti)	# must be before sparc entry or we get the wrong os.
-+		os=-sysv3
-+		;;
-+	sparc-* | *-sun)
-+		os=-sunos4.1.1
-+		;;
-+	*-be)
-+		os=-beos
-+		;;
-+	*-haiku)
-+		os=-haiku
-+		;;
-+	*-ibm)
-+		os=-aix
-+		;;
-+    	*-knuth)
-+		os=-mmixware
-+		;;
-+	*-wec)
-+		os=-proelf
-+		;;
-+	*-winbond)
-+		os=-proelf
-+		;;
-+	*-oki)
-+		os=-proelf
-+		;;
-+	*-hp)
-+		os=-hpux
-+		;;
-+	*-hitachi)
-+		os=-hiux
-+		;;
-+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-+		os=-sysv
-+		;;
-+	*-cbm)
-+		os=-amigaos
-+		;;
-+	*-dg)
-+		os=-dgux
-+		;;
-+	*-dolphin)
-+		os=-sysv3
-+		;;
-+	m68k-ccur)
-+		os=-rtu
-+		;;
-+	m88k-omron*)
-+		os=-luna
-+		;;
-+	*-next )
-+		os=-nextstep
-+		;;
-+	*-sequent)
-+		os=-ptx
-+		;;
-+	*-crds)
-+		os=-unos
-+		;;
-+	*-ns)
-+		os=-genix
-+		;;
-+	i370-*)
-+		os=-mvs
-+		;;
-+	*-next)
-+		os=-nextstep3
-+		;;
-+	*-gould)
-+		os=-sysv
-+		;;
-+	*-highlevel)
-+		os=-bsd
-+		;;
-+	*-encore)
-+		os=-bsd
-+		;;
-+	*-sgi)
-+		os=-irix
-+		;;
-+	*-siemens)
-+		os=-sysv4
-+		;;
-+	*-masscomp)
-+		os=-rtu
-+		;;
-+	f30[01]-fujitsu | f700-fujitsu)
-+		os=-uxpv
-+		;;
-+	*-rom68k)
-+		os=-coff
-+		;;
-+	*-*bug)
-+		os=-coff
-+		;;
-+	*-apple)
-+		os=-macos
-+		;;
-+	*-atari*)
-+		os=-mint
-+		;;
-+	*)
-+		os=-none
-+		;;
-+esac
-+fi
-+
-+# Here we handle the case where we know the os, and the CPU type, but not the
-+# manufacturer.  We pick the logical manufacturer.
-+vendor=unknown
-+case $basic_machine in
-+	*-unknown)
-+		case $os in
-+			-riscix*)
-+				vendor=acorn
-+				;;
-+			-sunos*)
-+				vendor=sun
-+				;;
-+			-aix*)
-+				vendor=ibm
-+				;;
-+			-beos*)
-+				vendor=be
-+				;;
-+			-hpux*)
-+				vendor=hp
-+				;;
-+			-mpeix*)
-+				vendor=hp
-+				;;
-+			-hiux*)
-+				vendor=hitachi
-+				;;
-+			-unos*)
-+				vendor=crds
-+				;;
-+			-dgux*)
-+				vendor=dg
-+				;;
-+			-luna*)
-+				vendor=omron
-+				;;
-+			-genix*)
-+				vendor=ns
-+				;;
-+			-mvs* | -opened*)
-+				vendor=ibm
-+				;;
-+			-os400*)
-+				vendor=ibm
-+				;;
-+			-ptx*)
-+				vendor=sequent
-+				;;
-+			-tpf*)
-+				vendor=ibm
-+				;;
-+			-vxsim* | -vxworks* | -windiss*)
-+				vendor=wrs
-+				;;
-+			-aux*)
-+				vendor=apple
-+				;;
-+			-hms*)
-+				vendor=hitachi
-+				;;
-+			-mpw* | -macos*)
-+				vendor=apple
-+				;;
-+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-+				vendor=atari
-+				;;
-+			-vos*)
-+				vendor=stratus
-+				;;
-+		esac
-+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-+		;;
-+esac
-+
-+echo $basic_machine$os
-+exit
-+
-+# Local variables:
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "timestamp='"
-+# time-stamp-format: "%:y-%02m-%02d"
-+# time-stamp-end: "'"
-+# End:
---- adjtimex-1.23.orig/config.guess
-+++ adjtimex-1.23/config.guess
-@@ -0,0 +1,1516 @@
-+#! /bin/sh
-+# Attempt to guess a canonical system name.
-+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-+#   Inc.
-+
-+timestamp='2007-03-06'
-+
-+# This file is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-+# 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+
-+# Originally written by Per Bothner <per@bothner.com>.
-+# Please send patches to <config-patches@gnu.org>.  Submit a context
-+# diff and a properly formatted ChangeLog entry.
-+#
-+# This script attempts to guess a canonical system name similar to
-+# config.sub.  If it succeeds, it prints the system name on stdout, and
-+# exits with 0.  Otherwise, it exits with 1.
-+#
-+# The plan is that this can be called by configure scripts if you
-+# don't specify an explicit build system type.
-+
-+me=`echo "$0" | sed -e 's,.*/,,'`
-+
-+usage="\
-+Usage: $0 [OPTION]
-+
-+Output the configuration name of the system \`$me' is run on.
-+
-+Operation modes:
-+  -h, --help         print this help, then exit
-+  -t, --time-stamp   print date of last modification, then exit
-+  -v, --version      print version number, then exit
-+
-+Report bugs and patches to <config-patches@gnu.org>."
-+
-+version="\
-+GNU config.guess ($timestamp)
-+
-+Originally written by Per Bothner.
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-+Free Software Foundation, Inc.
-+
-+This is free software; see the source for copying conditions.  There is NO
-+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-+
-+help="
-+Try \`$me --help' for more information."
-+
-+# Parse command line
-+while test $# -gt 0 ; do
-+  case $1 in
-+    --time-stamp | --time* | -t )
-+       echo "$timestamp" ; exit ;;
-+    --version | -v )
-+       echo "$version" ; exit ;;
-+    --help | --h* | -h )
-+       echo "$usage"; exit ;;
-+    -- )     # Stop option processing
-+       shift; break ;;
-+    - )	# Use stdin as input.
-+       break ;;
-+    -* )
-+       echo "$me: invalid option $1$help" >&2
-+       exit 1 ;;
-+    * )
-+       break ;;
-+  esac
-+done
-+
-+if test $# != 0; then
-+  echo "$me: too many arguments$help" >&2
-+  exit 1
-+fi
-+
-+trap 'exit 1' 1 2 15
-+
-+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-+# compiler to aid in system detection is discouraged as it requires
-+# temporary files to be created and, as you can see below, it is a
-+# headache to deal with in a portable fashion.
-+
-+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-+# use `HOST_CC' if defined, but it is deprecated.
-+
-+# Portable tmp directory creation inspired by the Autoconf team.
-+
-+set_cc_for_build='
-+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-+: ${TMPDIR=/tmp} ;
-+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
-+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
-+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
-+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-+dummy=$tmp/dummy ;
-+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-+case $CC_FOR_BUILD,$HOST_CC,$CC in
-+ ,,)    echo "int x;" > $dummy.c ;
-+	for c in cc gcc c89 c99 ; do
-+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-+	     CC_FOR_BUILD="$c"; break ;
-+	  fi ;
-+	done ;
-+	if test x"$CC_FOR_BUILD" = x ; then
-+	  CC_FOR_BUILD=no_compiler_found ;
-+	fi
-+	;;
-+ ,,*)   CC_FOR_BUILD=$CC ;;
-+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-+esac ; set_cc_for_build= ;'
-+
-+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-+# (ghazi@noc.rutgers.edu 1994-08-24)
-+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-+	PATH=$PATH:/.attbin ; export PATH
-+fi
-+
-+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-+
-+# Note: order is significant - the case branches are not exclusive.
-+
-+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-+    *:NetBSD:*:*)
-+	# NetBSD (nbsd) targets should (where applicable) match one or
-+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-+	# switched to ELF, *-*-netbsd* would select the old
-+	# object file format.  This provides both forward
-+	# compatibility and a consistent mechanism for selecting the
-+	# object file format.
-+	#
-+	# Note: NetBSD doesn't particularly care about the vendor
-+	# portion of the name.  We always set it to "unknown".
-+	sysctl="sysctl -n hw.machine_arch"
-+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-+	case "${UNAME_MACHINE_ARCH}" in
-+	    armeb) machine=armeb-unknown ;;
-+	    arm*) machine=arm-unknown ;;
-+	    sh3el) machine=shl-unknown ;;
-+	    sh3eb) machine=sh-unknown ;;
-+	    sh5el) machine=sh5le-unknown ;;
-+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-+	esac
-+	# The Operating System including object format, if it has switched
-+	# to ELF recently, or will in the future.
-+	case "${UNAME_MACHINE_ARCH}" in
-+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-+		eval $set_cc_for_build
-+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-+			| grep __ELF__ >/dev/null
-+		then
-+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-+		    # Return netbsd for either.  FIX?
-+		    os=netbsd
-+		else
-+		    os=netbsdelf
-+		fi
-+		;;
-+	    *)
-+	        os=netbsd
-+		;;
-+	esac
-+	# The OS release
-+	# Debian GNU/NetBSD machines have a different userland, and
-+	# thus, need a distinct triplet. However, they do not need
-+	# kernel version information, so it can be replaced with a
-+	# suitable tag, in the style of linux-gnu.
-+	case "${UNAME_VERSION}" in
-+	    Debian*)
-+		release='-gnu'
-+		;;
-+	    *)
-+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-+		;;
-+	esac
-+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-+	# contains redundant information, the shorter form:
-+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-+	echo "${machine}-${os}${release}"
-+	exit ;;
-+    *:OpenBSD:*:*)
-+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-+	exit ;;
-+    *:ekkoBSD:*:*)
-+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-+	exit ;;
-+    *:SolidBSD:*:*)
-+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-+	exit ;;
-+    macppc:MirBSD:*:*)
-+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-+	exit ;;
-+    *:MirBSD:*:*)
-+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-+	exit ;;
-+    alpha:OSF1:*:*)
-+	case $UNAME_RELEASE in
-+	*4.0)
-+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-+		;;
-+	*5.*)
-+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-+		;;
-+	esac
-+	# According to Compaq, /usr/sbin/psrinfo has been available on
-+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-+	# covers most systems running today.  This code pipes the CPU
-+	# types through head -n 1, so we only detect the type of CPU 0.
-+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-+	case "$ALPHA_CPU_TYPE" in
-+	    "EV4 (21064)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "EV4.5 (21064)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "LCA4 (21066/21068)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "EV5 (21164)")
-+		UNAME_MACHINE="alphaev5" ;;
-+	    "EV5.6 (21164A)")
-+		UNAME_MACHINE="alphaev56" ;;
-+	    "EV5.6 (21164PC)")
-+		UNAME_MACHINE="alphapca56" ;;
-+	    "EV5.7 (21164PC)")
-+		UNAME_MACHINE="alphapca57" ;;
-+	    "EV6 (21264)")
-+		UNAME_MACHINE="alphaev6" ;;
-+	    "EV6.7 (21264A)")
-+		UNAME_MACHINE="alphaev67" ;;
-+	    "EV6.8CB (21264C)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.8AL (21264B)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.8CX (21264D)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.9A (21264/EV69A)")
-+		UNAME_MACHINE="alphaev69" ;;
-+	    "EV7 (21364)")
-+		UNAME_MACHINE="alphaev7" ;;
-+	    "EV7.9 (21364A)")
-+		UNAME_MACHINE="alphaev79" ;;
-+	esac
-+	# A Pn.n version is a patched version.
-+	# A Vn.n version is a released version.
-+	# A Tn.n version is a released field test version.
-+	# A Xn.n version is an unreleased experimental baselevel.
-+	# 1.2 uses "1.2" for uname -r.
-+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-+	exit ;;
-+    Alpha\ *:Windows_NT*:*)
-+	# How do we know it's Interix rather than the generic POSIX subsystem?
-+	# Should we change UNAME_MACHINE based on the output of uname instead
-+	# of the specific Alpha model?
-+	echo alpha-pc-interix
-+	exit ;;
-+    21064:Windows_NT:50:3)
-+	echo alpha-dec-winnt3.5
-+	exit ;;
-+    Amiga*:UNIX_System_V:4.0:*)
-+	echo m68k-unknown-sysv4
-+	exit ;;
-+    *:[Aa]miga[Oo][Ss]:*:*)
-+	echo ${UNAME_MACHINE}-unknown-amigaos
-+	exit ;;
-+    *:[Mm]orph[Oo][Ss]:*:*)
-+	echo ${UNAME_MACHINE}-unknown-morphos
-+	exit ;;
-+    *:OS/390:*:*)
-+	echo i370-ibm-openedition
-+	exit ;;
-+    *:z/VM:*:*)
-+	echo s390-ibm-zvmoe
-+	exit ;;
-+    *:OS400:*:*)
-+        echo powerpc-ibm-os400
-+	exit ;;
-+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-+	echo arm-acorn-riscix${UNAME_RELEASE}
-+	exit ;;
-+    arm:riscos:*:*|arm:RISCOS:*:*)
-+	echo arm-unknown-riscos
-+	exit ;;
-+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-+	echo hppa1.1-hitachi-hiuxmpp
-+	exit ;;
-+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-+		echo pyramid-pyramid-sysv3
-+	else
-+		echo pyramid-pyramid-bsd
-+	fi
-+	exit ;;
-+    NILE*:*:*:dcosx)
-+	echo pyramid-pyramid-svr4
-+	exit ;;
-+    DRS?6000:unix:4.0:6*)
-+	echo sparc-icl-nx6
-+	exit ;;
-+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-+	case `/usr/bin/uname -p` in
-+	    sparc) echo sparc-icl-nx7; exit ;;
-+	esac ;;
-+    sun4H:SunOS:5.*:*)
-+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-+    i86pc:SunOS:5.*:*)
-+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-+    sun4*:SunOS:6*:*)
-+	# According to config.sub, this is the proper way to canonicalize
-+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-+	# it's likely to be more like Solaris than SunOS4.
-+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-+    sun4*:SunOS:*:*)
-+	case "`/usr/bin/arch -k`" in
-+	    Series*|S4*)
-+		UNAME_RELEASE=`uname -v`
-+		;;
-+	esac
-+	# Japanese Language versions have a version number like `4.1.3-JL'.
-+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-+	exit ;;
-+    sun3*:SunOS:*:*)
-+	echo m68k-sun-sunos${UNAME_RELEASE}
-+	exit ;;
-+    sun*:*:4.2BSD:*)
-+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-+	case "`/bin/arch`" in
-+	    sun3)
-+		echo m68k-sun-sunos${UNAME_RELEASE}
-+		;;
-+	    sun4)
-+		echo sparc-sun-sunos${UNAME_RELEASE}
-+		;;
-+	esac
-+	exit ;;
-+    aushp:SunOS:*:*)
-+	echo sparc-auspex-sunos${UNAME_RELEASE}
-+	exit ;;
-+    # The situation for MiNT is a little confusing.  The machine name
-+    # can be virtually everything (everything which is not
-+    # "atarist" or "atariste" at least should have a processor
-+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-+    # to the lowercase version "mint" (or "freemint").  Finally
-+    # the system name "TOS" denotes a system which is actually not
-+    # MiNT.  But MiNT is downward compatible to TOS, so this should
-+    # be no problem.
-+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-+        echo m68k-atari-mint${UNAME_RELEASE}
-+	exit ;;
-+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-+	echo m68k-atari-mint${UNAME_RELEASE}
-+        exit ;;
-+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-+        echo m68k-atari-mint${UNAME_RELEASE}
-+	exit ;;
-+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-+        echo m68k-milan-mint${UNAME_RELEASE}
-+        exit ;;
-+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-+        echo m68k-hades-mint${UNAME_RELEASE}
-+        exit ;;
-+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-+        echo m68k-unknown-mint${UNAME_RELEASE}
-+        exit ;;
-+    m68k:machten:*:*)
-+	echo m68k-apple-machten${UNAME_RELEASE}
-+	exit ;;
-+    powerpc:machten:*:*)
-+	echo powerpc-apple-machten${UNAME_RELEASE}
-+	exit ;;
-+    RISC*:Mach:*:*)
-+	echo mips-dec-mach_bsd4.3
-+	exit ;;
-+    RISC*:ULTRIX:*:*)
-+	echo mips-dec-ultrix${UNAME_RELEASE}
-+	exit ;;
-+    VAX*:ULTRIX*:*:*)
-+	echo vax-dec-ultrix${UNAME_RELEASE}
-+	exit ;;
-+    2020:CLIX:*:* | 2430:CLIX:*:*)
-+	echo clipper-intergraph-clix${UNAME_RELEASE}
-+	exit ;;
-+    mips:*:*:UMIPS | mips:*:*:RISCos)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+#ifdef __cplusplus
-+#include <stdio.h>  /* for printf() prototype */
-+	int main (int argc, char *argv[]) {
-+#else
-+	int main (argc, argv) int argc; char *argv[]; {
-+#endif
-+	#if defined (host_mips) && defined (MIPSEB)
-+	#if defined (SYSTYPE_SYSV)
-+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-+	#endif
-+	#if defined (SYSTYPE_SVR4)
-+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-+	#endif
-+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-+	#endif
-+	#endif
-+	  exit (-1);
-+	}
-+EOF
-+	$CC_FOR_BUILD -o $dummy $dummy.c &&
-+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-+	  SYSTEM_NAME=`$dummy $dummyarg` &&
-+	    { echo "$SYSTEM_NAME"; exit; }
-+	echo mips-mips-riscos${UNAME_RELEASE}
-+	exit ;;
-+    Motorola:PowerMAX_OS:*:*)
-+	echo powerpc-motorola-powermax
-+	exit ;;
-+    Motorola:*:4.3:PL8-*)
-+	echo powerpc-harris-powermax
-+	exit ;;
-+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-+	echo powerpc-harris-powermax
-+	exit ;;
-+    Night_Hawk:Power_UNIX:*:*)
-+	echo powerpc-harris-powerunix
-+	exit ;;
-+    m88k:CX/UX:7*:*)
-+	echo m88k-harris-cxux7
-+	exit ;;
-+    m88k:*:4*:R4*)
-+	echo m88k-motorola-sysv4
-+	exit ;;
-+    m88k:*:3*:R3*)
-+	echo m88k-motorola-sysv3
-+	exit ;;
-+    AViiON:dgux:*:*)
-+        # DG/UX returns AViiON for all architectures
-+        UNAME_PROCESSOR=`/usr/bin/uname -p`
-+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-+	then
-+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-+	    then
-+		echo m88k-dg-dgux${UNAME_RELEASE}
-+	    else
-+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-+	    fi
-+	else
-+	    echo i586-dg-dgux${UNAME_RELEASE}
-+	fi
-+ 	exit ;;
-+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-+	echo m88k-dolphin-sysv3
-+	exit ;;
-+    M88*:*:R3*:*)
-+	# Delta 88k system running SVR3
-+	echo m88k-motorola-sysv3
-+	exit ;;
-+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-+	echo m88k-tektronix-sysv3
-+	exit ;;
-+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-+	echo m68k-tektronix-bsd
-+	exit ;;
-+    *:IRIX*:*:*)
-+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-+	exit ;;
-+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-+    i*86:AIX:*:*)
-+	echo i386-ibm-aix
-+	exit ;;
-+    ia64:AIX:*:*)
-+	if [ -x /usr/bin/oslevel ] ; then
-+		IBM_REV=`/usr/bin/oslevel`
-+	else
-+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-+	fi
-+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-+	exit ;;
-+    *:AIX:2:3)
-+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-+		eval $set_cc_for_build
-+		sed 's/^		//' << EOF >$dummy.c
-+		#include <sys/systemcfg.h>
-+
-+		main()
-+			{
-+			if (!__power_pc())
-+				exit(1);
-+			puts("powerpc-ibm-aix3.2.5");
-+			exit(0);
-+			}
-+EOF
-+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-+		then
-+			echo "$SYSTEM_NAME"
-+		else
-+			echo rs6000-ibm-aix3.2.5
-+		fi
-+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-+		echo rs6000-ibm-aix3.2.4
-+	else
-+		echo rs6000-ibm-aix3.2
-+	fi
-+	exit ;;
-+    *:AIX:*:[45])
-+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-+		IBM_ARCH=rs6000
-+	else
-+		IBM_ARCH=powerpc
-+	fi
-+	if [ -x /usr/bin/oslevel ] ; then
-+		IBM_REV=`/usr/bin/oslevel`
-+	else
-+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-+	fi
-+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-+	exit ;;
-+    *:AIX:*:*)
-+	echo rs6000-ibm-aix
-+	exit ;;
-+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-+	echo romp-ibm-bsd4.4
-+	exit ;;
-+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-+	exit ;;                             # report: romp-ibm BSD 4.3
-+    *:BOSX:*:*)
-+	echo rs6000-bull-bosx
-+	exit ;;
-+    DPX/2?00:B.O.S.:*:*)
-+	echo m68k-bull-sysv3
-+	exit ;;
-+    9000/[34]??:4.3bsd:1.*:*)
-+	echo m68k-hp-bsd
-+	exit ;;
-+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-+	echo m68k-hp-bsd4.4
-+	exit ;;
-+    9000/[34678]??:HP-UX:*:*)
-+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-+	case "${UNAME_MACHINE}" in
-+	    9000/31? )            HP_ARCH=m68000 ;;
-+	    9000/[34]?? )         HP_ARCH=m68k ;;
-+	    9000/[678][0-9][0-9])
-+		if [ -x /usr/bin/getconf ]; then
-+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-+                    case "${sc_cpu_version}" in
-+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-+                      532)                      # CPU_PA_RISC2_0
-+                        case "${sc_kernel_bits}" in
-+                          32) HP_ARCH="hppa2.0n" ;;
-+                          64) HP_ARCH="hppa2.0w" ;;
-+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-+                        esac ;;
-+                    esac
-+		fi
-+		if [ "${HP_ARCH}" = "" ]; then
-+		    eval $set_cc_for_build
-+		    sed 's/^              //' << EOF >$dummy.c
-+
-+              #define _HPUX_SOURCE
-+              #include <stdlib.h>
-+              #include <unistd.h>
-+
-+              int main ()
-+              {
-+              #if defined(_SC_KERNEL_BITS)
-+                  long bits = sysconf(_SC_KERNEL_BITS);
-+              #endif
-+                  long cpu  = sysconf (_SC_CPU_VERSION);
-+
-+                  switch (cpu)
-+              	{
-+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-+              	case CPU_PA_RISC2_0:
-+              #if defined(_SC_KERNEL_BITS)
-+              	    switch (bits)
-+              		{
-+              		case 64: puts ("hppa2.0w"); break;
-+              		case 32: puts ("hppa2.0n"); break;
-+              		default: puts ("hppa2.0"); break;
-+              		} break;
-+              #else  /* !defined(_SC_KERNEL_BITS) */
-+              	    puts ("hppa2.0"); break;
-+              #endif
-+              	default: puts ("hppa1.0"); break;
-+              	}
-+                  exit (0);
-+              }
-+EOF
-+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-+		    test -z "$HP_ARCH" && HP_ARCH=hppa
-+		fi ;;
-+	esac
-+	if [ ${HP_ARCH} = "hppa2.0w" ]
-+	then
-+	    eval $set_cc_for_build
-+
-+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-+	    # generating 64-bit code.  GNU and HP use different nomenclature:
-+	    #
-+	    # $ CC_FOR_BUILD=cc ./config.guess
-+	    # => hppa2.0w-hp-hpux11.23
-+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-+	    # => hppa64-hp-hpux11.23
-+
-+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-+		grep __LP64__ >/dev/null
-+	    then
-+		HP_ARCH="hppa2.0w"
-+	    else
-+		HP_ARCH="hppa64"
-+	    fi
-+	fi
-+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-+	exit ;;
-+    ia64:HP-UX:*:*)
-+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-+	echo ia64-hp-hpux${HPUX_REV}
-+	exit ;;
-+    3050*:HI-UX:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#include <unistd.h>
-+	int
-+	main ()
-+	{
-+	  long cpu = sysconf (_SC_CPU_VERSION);
-+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-+	     results, however.  */
-+	  if (CPU_IS_PA_RISC (cpu))
-+	    {
-+	      switch (cpu)
-+		{
-+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-+		}
-+	    }
-+	  else if (CPU_IS_HP_MC68K (cpu))
-+	    puts ("m68k-hitachi-hiuxwe2");
-+	  else puts ("unknown-hitachi-hiuxwe2");
-+	  exit (0);
-+	}
-+EOF
-+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-+		{ echo "$SYSTEM_NAME"; exit; }
-+	echo unknown-hitachi-hiuxwe2
-+	exit ;;
-+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-+	echo hppa1.1-hp-bsd
-+	exit ;;
-+    9000/8??:4.3bsd:*:*)
-+	echo hppa1.0-hp-bsd
-+	exit ;;
-+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-+	echo hppa1.0-hp-mpeix
-+	exit ;;
-+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-+	echo hppa1.1-hp-osf
-+	exit ;;
-+    hp8??:OSF1:*:*)
-+	echo hppa1.0-hp-osf
-+	exit ;;
-+    i*86:OSF1:*:*)
-+	if [ -x /usr/sbin/sysversion ] ; then
-+	    echo ${UNAME_MACHINE}-unknown-osf1mk
-+	else
-+	    echo ${UNAME_MACHINE}-unknown-osf1
-+	fi
-+	exit ;;
-+    parisc*:Lites*:*:*)
-+	echo hppa1.1-hp-lites
-+	exit ;;
-+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-+	echo c1-convex-bsd
-+        exit ;;
-+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-+	if getsysinfo -f scalar_acc
-+	then echo c32-convex-bsd
-+	else echo c2-convex-bsd
-+	fi
-+        exit ;;
-+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-+	echo c34-convex-bsd
-+        exit ;;
-+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-+	echo c38-convex-bsd
-+        exit ;;
-+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-+	echo c4-convex-bsd
-+        exit ;;
-+    CRAY*Y-MP:*:*:*)
-+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    CRAY*[A-Z]90:*:*:*)
-+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-+	      -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    CRAY*TS:*:*:*)
-+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    CRAY*T3E:*:*:*)
-+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    CRAY*SV1:*:*:*)
-+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    *:UNICOS/mp:*:*)
-+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit ;;
-+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-+        exit ;;
-+    5000:UNIX_System_V:4.*:*)
-+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-+	exit ;;
-+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-+	exit ;;
-+    sparc*:BSD/OS:*:*)
-+	echo sparc-unknown-bsdi${UNAME_RELEASE}
-+	exit ;;
-+    *:BSD/OS:*:*)
-+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-+	exit ;;
-+    *:FreeBSD:*:*)
-+	case ${UNAME_MACHINE} in
-+	    pc98)
-+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-+	    amd64)
-+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-+	    *)
-+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-+	esac
-+	exit ;;
-+    i*:CYGWIN*:*)
-+	echo ${UNAME_MACHINE}-pc-cygwin
-+	exit ;;
-+    *:MINGW*:*)
-+	echo ${UNAME_MACHINE}-pc-mingw32
-+	exit ;;
-+    i*:windows32*:*)
-+    	# uname -m includes "-pc" on this system.
-+    	echo ${UNAME_MACHINE}-mingw32
-+	exit ;;
-+    i*:PW*:*)
-+	echo ${UNAME_MACHINE}-pc-pw32
-+	exit ;;
-+    *:Interix*:[3456]*)
-+    	case ${UNAME_MACHINE} in
-+	    x86) 
-+		echo i586-pc-interix${UNAME_RELEASE}
-+		exit ;;
-+	    EM64T | authenticamd)
-+		echo x86_64-unknown-interix${UNAME_RELEASE}
-+		exit ;;
-+	esac ;;
-+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-+	echo i${UNAME_MACHINE}-pc-mks
-+	exit ;;
-+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-+	# How do we know it's Interix rather than the generic POSIX subsystem?
-+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-+	# UNAME_MACHINE based on the output of uname instead of i386?
-+	echo i586-pc-interix
-+	exit ;;
-+    i*:UWIN*:*)
-+	echo ${UNAME_MACHINE}-pc-uwin
-+	exit ;;
-+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-+	echo x86_64-unknown-cygwin
-+	exit ;;
-+    p*:CYGWIN*:*)
-+	echo powerpcle-unknown-cygwin
-+	exit ;;
-+    prep*:SunOS:5.*:*)
-+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-+    *:GNU:*:*)
-+	# the GNU system
-+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-+	exit ;;
-+    *:GNU/*:*:*)
-+	# other systems with GNU libc and userland
-+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-+	exit ;;
-+    i*86:Minix:*:*)
-+	echo ${UNAME_MACHINE}-pc-minix
-+	exit ;;
-+    arm*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    avr32*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    cris:Linux:*:*)
-+	echo cris-axis-linux-gnu
-+	exit ;;
-+    crisv32:Linux:*:*)
-+	echo crisv32-axis-linux-gnu
-+	exit ;;
-+    frv:Linux:*:*)
-+    	echo frv-unknown-linux-gnu
-+	exit ;;
-+    ia64:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    m32r*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    m68*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    mips:Linux:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#undef CPU
-+	#undef mips
-+	#undef mipsel
-+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+	CPU=mipsel
-+	#else
-+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+	CPU=mips
-+	#else
-+	CPU=
-+	#endif
-+	#endif
-+EOF
-+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-+	    /^CPU/{
-+		s: ::g
-+		p
-+	    }'`"
-+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-+	;;
-+    mips64:Linux:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#undef CPU
-+	#undef mips64
-+	#undef mips64el
-+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+	CPU=mips64el
-+	#else
-+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+	CPU=mips64
-+	#else
-+	CPU=
-+	#endif
-+	#endif
-+EOF
-+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-+	    /^CPU/{
-+		s: ::g
-+		p
-+	    }'`"
-+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-+	;;
-+    or32:Linux:*:*)
-+	echo or32-unknown-linux-gnu
-+	exit ;;
-+    ppc:Linux:*:*)
-+	echo powerpc-unknown-linux-gnu
-+	exit ;;
-+    ppc64:Linux:*:*)
-+	echo powerpc64-unknown-linux-gnu
-+	exit ;;
-+    alpha:Linux:*:*)
-+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-+	  EV5)   UNAME_MACHINE=alphaev5 ;;
-+	  EV56)  UNAME_MACHINE=alphaev56 ;;
-+	  PCA56) UNAME_MACHINE=alphapca56 ;;
-+	  PCA57) UNAME_MACHINE=alphapca56 ;;
-+	  EV6)   UNAME_MACHINE=alphaev6 ;;
-+	  EV67)  UNAME_MACHINE=alphaev67 ;;
-+	  EV68*) UNAME_MACHINE=alphaev68 ;;
-+        esac
-+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-+	exit ;;
-+    parisc:Linux:*:* | hppa:Linux:*:*)
-+	# Look for CPU level
-+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-+	  *)    echo hppa-unknown-linux-gnu ;;
-+	esac
-+	exit ;;
-+    parisc64:Linux:*:* | hppa64:Linux:*:*)
-+	echo hppa64-unknown-linux-gnu
-+	exit ;;
-+    s390:Linux:*:* | s390x:Linux:*:*)
-+	echo ${UNAME_MACHINE}-ibm-linux
-+	exit ;;
-+    sh64*:Linux:*:*)
-+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    sh*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    sparc:Linux:*:* | sparc64:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit ;;
-+    vax:Linux:*:*)
-+	echo ${UNAME_MACHINE}-dec-linux-gnu
-+	exit ;;
-+    x86_64:Linux:*:*)
-+	echo x86_64-unknown-linux-gnu
-+	exit ;;
-+    xtensa:Linux:*:*)
-+    	echo xtensa-unknown-linux-gnu
-+	exit ;;
-+    i*86:Linux:*:*)
-+	# The BFD linker knows what the default object file format is, so
-+	# first see if it will tell us. cd to the root directory to prevent
-+	# problems with other programs or directories called `ld' in the path.
-+	# Set LC_ALL=C to ensure ld outputs messages in English.
-+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-+			 | sed -ne '/supported targets:/!d
-+				    s/[ 	][ 	]*/ /g
-+				    s/.*supported targets: *//
-+				    s/ .*//
-+				    p'`
-+        case "$ld_supported_targets" in
-+	  elf32-i386)
-+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-+		;;
-+	  a.out-i386-linux)
-+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-+		exit ;;
-+	  coff-i386)
-+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-+		exit ;;
-+	  "")
-+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-+		# one that does not give us useful --help.
-+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-+		exit ;;
-+	esac
-+	# Determine whether the default compiler is a.out or elf
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#include <features.h>
-+	#ifdef __ELF__
-+	# ifdef __GLIBC__
-+	#  if __GLIBC__ >= 2
-+	LIBC=gnu
-+	#  else
-+	LIBC=gnulibc1
-+	#  endif
-+	# else
-+	LIBC=gnulibc1
-+	# endif
-+	#else
-+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-+	LIBC=gnu
-+	#else
-+	LIBC=gnuaout
-+	#endif
-+	#endif
-+	#ifdef __dietlibc__
-+	LIBC=dietlibc
-+	#endif
-+EOF
-+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-+	    /^LIBC/{
-+		s: ::g
-+		p
-+	    }'`"
-+	test x"${LIBC}" != x && {
-+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-+		exit
-+	}
-+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-+	;;
-+    i*86:DYNIX/ptx:4*:*)
-+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-+	# earlier versions are messed up and put the nodename in both
-+	# sysname and nodename.
-+	echo i386-sequent-sysv4
-+	exit ;;
-+    i*86:UNIX_SV:4.2MP:2.*)
-+        # Unixware is an offshoot of SVR4, but it has its own version
-+        # number series starting with 2...
-+        # I am not positive that other SVR4 systems won't match this,
-+	# I just have to hope.  -- rms.
-+        # Use sysv4.2uw... so that sysv4* matches it.
-+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-+	exit ;;
-+    i*86:OS/2:*:*)
-+	# If we were able to find `uname', then EMX Unix compatibility
-+	# is probably installed.
-+	echo ${UNAME_MACHINE}-pc-os2-emx
-+	exit ;;
-+    i*86:XTS-300:*:STOP)
-+	echo ${UNAME_MACHINE}-unknown-stop
-+	exit ;;
-+    i*86:atheos:*:*)
-+	echo ${UNAME_MACHINE}-unknown-atheos
-+	exit ;;
-+    i*86:syllable:*:*)
-+	echo ${UNAME_MACHINE}-pc-syllable
-+	exit ;;
-+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-+	echo i386-unknown-lynxos${UNAME_RELEASE}
-+	exit ;;
-+    i*86:*DOS:*:*)
-+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-+	exit ;;
-+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-+	else
-+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-+	fi
-+	exit ;;
-+    i*86:*:5:[678]*)
-+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-+	case `/bin/uname -X | grep "^Machine"` in
-+	    *486*)	     UNAME_MACHINE=i486 ;;
-+	    *Pentium)	     UNAME_MACHINE=i586 ;;
-+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-+	esac
-+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-+	exit ;;
-+    i*86:*:3.2:*)
-+	if test -f /usr/options/cb.name; then
-+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-+			&& UNAME_MACHINE=i586
-+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-+			&& UNAME_MACHINE=i686
-+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-+			&& UNAME_MACHINE=i686
-+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-+	else
-+		echo ${UNAME_MACHINE}-pc-sysv32
-+	fi
-+	exit ;;
-+    pc:*:*:*)
-+	# Left here for compatibility:
-+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-+        # the processor, so we play safe by assuming i386.
-+	echo i386-pc-msdosdjgpp
-+        exit ;;
-+    Intel:Mach:3*:*)
-+	echo i386-pc-mach3
-+	exit ;;
-+    paragon:*:*:*)
-+	echo i860-intel-osf1
-+	exit ;;
-+    i860:*:4.*:*) # i860-SVR4
-+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-+	else # Add other i860-SVR4 vendors below as they are discovered.
-+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-+	fi
-+	exit ;;
-+    mini*:CTIX:SYS*5:*)
-+	# "miniframe"
-+	echo m68010-convergent-sysv
-+	exit ;;
-+    mc68k:UNIX:SYSTEM5:3.51m)
-+	echo m68k-convergent-sysv
-+	exit ;;
-+    M680?0:D-NIX:5.3:*)
-+	echo m68k-diab-dnix
-+	exit ;;
-+    M68*:*:R3V[5678]*:*)
-+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-+	OS_REL=''
-+	test -r /etc/.relid \
-+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-+          && { echo i486-ncr-sysv4; exit; } ;;
-+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-+	echo m68k-unknown-lynxos${UNAME_RELEASE}
-+	exit ;;
-+    mc68030:UNIX_System_V:4.*:*)
-+	echo m68k-atari-sysv4
-+	exit ;;
-+    TSUNAMI:LynxOS:2.*:*)
-+	echo sparc-unknown-lynxos${UNAME_RELEASE}
-+	exit ;;
-+    rs6000:LynxOS:2.*:*)
-+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-+	exit ;;
-+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-+	exit ;;
-+    SM[BE]S:UNIX_SV:*:*)
-+	echo mips-dde-sysv${UNAME_RELEASE}
-+	exit ;;
-+    RM*:ReliantUNIX-*:*:*)
-+	echo mips-sni-sysv4
-+	exit ;;
-+    RM*:SINIX-*:*:*)
-+	echo mips-sni-sysv4
-+	exit ;;
-+    *:SINIX-*:*:*)
-+	if uname -p 2>/dev/null >/dev/null ; then
-+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-+		echo ${UNAME_MACHINE}-sni-sysv4
-+	else
-+		echo ns32k-sni-sysv
-+	fi
-+	exit ;;
-+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-+        echo i586-unisys-sysv4
-+        exit ;;
-+    *:UNIX_System_V:4*:FTX*)
-+	# From Gerald Hewes <hewes@openmarket.com>.
-+	# How about differentiating between stratus architectures? -djm
-+	echo hppa1.1-stratus-sysv4
-+	exit ;;
-+    *:*:*:FTX*)
-+	# From seanf@swdc.stratus.com.
-+	echo i860-stratus-sysv4
-+	exit ;;
-+    i*86:VOS:*:*)
-+	# From Paul.Green@stratus.com.
-+	echo ${UNAME_MACHINE}-stratus-vos
-+	exit ;;
-+    *:VOS:*:*)
-+	# From Paul.Green@stratus.com.
-+	echo hppa1.1-stratus-vos
-+	exit ;;
-+    mc68*:A/UX:*:*)
-+	echo m68k-apple-aux${UNAME_RELEASE}
-+	exit ;;
-+    news*:NEWS-OS:6*:*)
-+	echo mips-sony-newsos6
-+	exit ;;
-+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-+	if [ -d /usr/nec ]; then
-+	        echo mips-nec-sysv${UNAME_RELEASE}
-+	else
-+	        echo mips-unknown-sysv${UNAME_RELEASE}
-+	fi
-+        exit ;;
-+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-+	echo powerpc-be-beos
-+	exit ;;
-+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-+	echo powerpc-apple-beos
-+	exit ;;
-+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-+	echo i586-pc-beos
-+	exit ;;
-+    SX-4:SUPER-UX:*:*)
-+	echo sx4-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    SX-5:SUPER-UX:*:*)
-+	echo sx5-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    SX-6:SUPER-UX:*:*)
-+	echo sx6-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    SX-7:SUPER-UX:*:*)
-+	echo sx7-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    SX-8:SUPER-UX:*:*)
-+	echo sx8-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    SX-8R:SUPER-UX:*:*)
-+	echo sx8r-nec-superux${UNAME_RELEASE}
-+	exit ;;
-+    Power*:Rhapsody:*:*)
-+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-+	exit ;;
-+    *:Rhapsody:*:*)
-+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-+	exit ;;
-+    *:Darwin:*:*)
-+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-+	case $UNAME_PROCESSOR in
-+	    unknown) UNAME_PROCESSOR=powerpc ;;
-+	esac
-+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-+	exit ;;
-+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-+	UNAME_PROCESSOR=`uname -p`
-+	if test "$UNAME_PROCESSOR" = "x86"; then
-+		UNAME_PROCESSOR=i386
-+		UNAME_MACHINE=pc
-+	fi
-+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-+	exit ;;
-+    *:QNX:*:4*)
-+	echo i386-pc-qnx
-+	exit ;;
-+    NSE-?:NONSTOP_KERNEL:*:*)
-+	echo nse-tandem-nsk${UNAME_RELEASE}
-+	exit ;;
-+    NSR-?:NONSTOP_KERNEL:*:*)
-+	echo nsr-tandem-nsk${UNAME_RELEASE}
-+	exit ;;
-+    *:NonStop-UX:*:*)
-+	echo mips-compaq-nonstopux
-+	exit ;;
-+    BS2000:POSIX*:*:*)
-+	echo bs2000-siemens-sysv
-+	exit ;;
-+    DS/*:UNIX_System_V:*:*)
-+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-+	exit ;;
-+    *:Plan9:*:*)
-+	# "uname -m" is not consistent, so use $cputype instead. 386
-+	# is converted to i386 for consistency with other x86
-+	# operating systems.
-+	if test "$cputype" = "386"; then
-+	    UNAME_MACHINE=i386
-+	else
-+	    UNAME_MACHINE="$cputype"
-+	fi
-+	echo ${UNAME_MACHINE}-unknown-plan9
-+	exit ;;
-+    *:TOPS-10:*:*)
-+	echo pdp10-unknown-tops10
-+	exit ;;
-+    *:TENEX:*:*)
-+	echo pdp10-unknown-tenex
-+	exit ;;
-+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-+	echo pdp10-dec-tops20
-+	exit ;;
-+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-+	echo pdp10-xkl-tops20
-+	exit ;;
-+    *:TOPS-20:*:*)
-+	echo pdp10-unknown-tops20
-+	exit ;;
-+    *:ITS:*:*)
-+	echo pdp10-unknown-its
-+	exit ;;
-+    SEI:*:*:SEIUX)
-+        echo mips-sei-seiux${UNAME_RELEASE}
-+	exit ;;
-+    *:DragonFly:*:*)
-+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-+	exit ;;
-+    *:*VMS:*:*)
-+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-+	case "${UNAME_MACHINE}" in
-+	    A*) echo alpha-dec-vms ; exit ;;
-+	    I*) echo ia64-dec-vms ; exit ;;
-+	    V*) echo vax-dec-vms ; exit ;;
-+	esac ;;
-+    *:XENIX:*:SysV)
-+	echo i386-pc-xenix
-+	exit ;;
-+    i*86:skyos:*:*)
-+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-+	exit ;;
-+    i*86:rdos:*:*)
-+	echo ${UNAME_MACHINE}-pc-rdos
-+	exit ;;
-+esac
-+
-+#echo '(No uname command or uname output not recognized.)' 1>&2
-+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-+
-+eval $set_cc_for_build
-+cat >$dummy.c <<EOF
-+#ifdef _SEQUENT_
-+# include <sys/types.h>
-+# include <sys/utsname.h>
-+#endif
-+main ()
-+{
-+#if defined (sony)
-+#if defined (MIPSEB)
-+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-+     I don't know....  */
-+  printf ("mips-sony-bsd\n"); exit (0);
-+#else
-+#include <sys/param.h>
-+  printf ("m68k-sony-newsos%s\n",
-+#ifdef NEWSOS4
-+          "4"
-+#else
-+	  ""
-+#endif
-+         ); exit (0);
-+#endif
-+#endif
-+
-+#if defined (__arm) && defined (__acorn) && defined (__unix)
-+  printf ("arm-acorn-riscix\n"); exit (0);
-+#endif
-+
-+#if defined (hp300) && !defined (hpux)
-+  printf ("m68k-hp-bsd\n"); exit (0);
-+#endif
-+
-+#if defined (NeXT)
-+#if !defined (__ARCHITECTURE__)
-+#define __ARCHITECTURE__ "m68k"
-+#endif
-+  int version;
-+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-+  if (version < 4)
-+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-+  else
-+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-+  exit (0);
-+#endif
-+
-+#if defined (MULTIMAX) || defined (n16)
-+#if defined (UMAXV)
-+  printf ("ns32k-encore-sysv\n"); exit (0);
-+#else
-+#if defined (CMU)
-+  printf ("ns32k-encore-mach\n"); exit (0);
-+#else
-+  printf ("ns32k-encore-bsd\n"); exit (0);
-+#endif
-+#endif
-+#endif
-+
-+#if defined (__386BSD__)
-+  printf ("i386-pc-bsd\n"); exit (0);
-+#endif
-+
-+#if defined (sequent)
-+#if defined (i386)
-+  printf ("i386-sequent-dynix\n"); exit (0);
-+#endif
-+#if defined (ns32000)
-+  printf ("ns32k-sequent-dynix\n"); exit (0);
-+#endif
-+#endif
-+
-+#if defined (_SEQUENT_)
-+    struct utsname un;
-+
-+    uname(&un);
-+
-+    if (strncmp(un.version, "V2", 2) == 0) {
-+	printf ("i386-sequent-ptx2\n"); exit (0);
-+    }
-+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-+	printf ("i386-sequent-ptx1\n"); exit (0);
-+    }
-+    printf ("i386-sequent-ptx\n"); exit (0);
-+
-+#endif
-+
-+#if defined (vax)
-+# if !defined (ultrix)
-+#  include <sys/param.h>
-+#  if defined (BSD)
-+#   if BSD == 43
-+      printf ("vax-dec-bsd4.3\n"); exit (0);
-+#   else
-+#    if BSD == 199006
-+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-+#    else
-+      printf ("vax-dec-bsd\n"); exit (0);
-+#    endif
-+#   endif
-+#  else
-+    printf ("vax-dec-bsd\n"); exit (0);
-+#  endif
-+# else
-+    printf ("vax-dec-ultrix\n"); exit (0);
-+# endif
-+#endif
-+
-+#if defined (alliant) && defined (i860)
-+  printf ("i860-alliant-bsd\n"); exit (0);
-+#endif
-+
-+  exit (1);
-+}
-+EOF
-+
-+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-+	{ echo "$SYSTEM_NAME"; exit; }
-+
-+# Apollos put the system type in the environment.
-+
-+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-+
-+# Convex versions that predate uname can use getsysinfo(1)
-+
-+if [ -x /usr/convex/getsysinfo ]
-+then
-+    case `getsysinfo -f cpu_type` in
-+    c1*)
-+	echo c1-convex-bsd
-+	exit ;;
-+    c2*)
-+	if getsysinfo -f scalar_acc
-+	then echo c32-convex-bsd
-+	else echo c2-convex-bsd
-+	fi
-+	exit ;;
-+    c34*)
-+	echo c34-convex-bsd
-+	exit ;;
-+    c38*)
-+	echo c38-convex-bsd
-+	exit ;;
-+    c4*)
-+	echo c4-convex-bsd
-+	exit ;;
-+    esac
-+fi
-+
-+cat >&2 <<EOF
-+$0: unable to guess system type
-+
-+This script, last modified $timestamp, has failed to recognize
-+the operating system you are using. It is advised that you
-+download the most up to date version of the config scripts from
-+
-+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-+and
-+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-+
-+If the version you run ($0) is already up to date, please
-+send the following data and any information you think might be
-+pertinent to <config-patches@gnu.org> in order to provide the needed
-+information to handle your system.
-+
-+config.guess timestamp = $timestamp
-+
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-+
-+hostinfo               = `(hostinfo) 2>/dev/null`
-+/bin/universe          = `(/bin/universe) 2>/dev/null`
-+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-+/bin/arch              = `(/bin/arch) 2>/dev/null`
-+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-+
-+UNAME_MACHINE = ${UNAME_MACHINE}
-+UNAME_RELEASE = ${UNAME_RELEASE}
-+UNAME_SYSTEM  = ${UNAME_SYSTEM}
-+UNAME_VERSION = ${UNAME_VERSION}
-+EOF
-+
-+exit 1
-+
-+# Local variables:
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "timestamp='"
-+# time-stamp-format: "%:y-%02m-%02d"
-+# time-stamp-end: "'"
-+# End:
---- adjtimex-1.23.orig/debian/control
-+++ adjtimex-1.23/debian/control
-@@ -0,0 +1,20 @@
-+Source: adjtimex
-+Section: admin
-+Priority: optional
-+Maintainer: James R. Van Zandt <jrv@debian.org>
-+Build-Depends: debhelper (>= 5), po-debconf
-+Standards-Version: 3.7.2
-+
-+Package: adjtimex
-+Architecture: any
-+Depends: ${shlibs:Depends}, debconf | debconf-2.0
-+Suggests: ntpdate
-+Description: Utility to display or set the kernel time variables
-+ This program gives you raw access to the kernel time variables.  For
-+ a machine connected to the Internet, or equipped with a precision
-+ oscillator or radio clock, the best way to keep the system clock
-+ correct is with ntpd.  However, for a standalone or intermittently
-+ connected machine, you may use adjtimex instead to at least correct
-+ for systematic drift.  adjtimex can optionally adjust the system
-+ clock using the CMOS clock as a reference, and can log times for
-+ long-term estimation of drift rates.
---- adjtimex-1.23.orig/debian/po/POTFILES.in
-+++ adjtimex-1.23/debian/po/POTFILES.in
-@@ -0,0 +1 @@
-+[type: gettext/rfc822deb] templates
---- adjtimex-1.23.orig/debian/po/templates.pot
-+++ adjtimex-1.23/debian/po/templates.pot
-@@ -0,0 +1,59 @@
-+# SOME DESCRIPTIVE TITLE.
-+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-+# This file is distributed under the same license as the PACKAGE package.
-+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-+#
-+#, fuzzy
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: PACKAGE VERSION\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-+"Language-Team: LANGUAGE <LL@li.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=CHARSET\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr ""
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
---- adjtimex-1.23.orig/debian/po/fr.po
-+++ adjtimex-1.23/debian/po/fr.po
-@@ -0,0 +1,87 @@
-+# translation of fr.po to French
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+# Christian Perrier <bubulle@debian.org>, 2006.
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: fr\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2006-12-17 14:01+0100\n"
-+"Last-Translator: Christian Perrier <bubulle@debian.org>\n"
-+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+"X-Generator: KBabel 1.11.4\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Faut-il lancer adjtimex lors de l'installation et à chaque démarrage du "
-+"système ?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"Adjtimex peut être lancé au démarrage du système afin de régler les "
-+"paramètres d'horloge du noyau en fonction des valeurs contenues dans /etc/"
-+"default/adjtimex. Ne choisissez pas cette option si vous souhaitez "
-+"simplement vous servir d'adjtimex pour consulter les paramètres actuels."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Faut-il lancer adjtimexconfig lors de l'installation ?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Le script adjtimexconfig utilise adjtimex afin de trouver les valeurs "
-+"appropriées pour les variables du noyau concernant le battement (« tick ») "
-+"et la fréquence d'horloge. Cela permettra à l'horloge du système d'être à "
-+"peu près en accord avec l'horloge matérielle (parfois appelée « horloge "
-+"CMOS »). Ces valeurs seront alors conservées dans le fichier de "
-+"configuration /etc/default/adjtimex ce qui permettra de les restaurer à "
-+"chaque démarrage quand /etc/init.d/adjtimex s'exécutera. "
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"La durée d'exécution du script est de 70 secondes. Vous pouvez également "
-+"utiliser adjtimexconfig vous-même plus tard ou déterminer les valeurs des "
-+"variables du noyau d'une autre manière (il en existe plusieurs : voir la "
-+"page de manuel d'adjtimex). Ces valeurs devront ensuite être placées dans /"
-+"etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/es.po
-+++ adjtimex-1.23/debian/po/es.po
-@@ -0,0 +1,81 @@
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+#, fuzzy
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: PACKAGE VERSION\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-+"Last-Translator: Vicente H. <vherrerv@supercable.es>\n"
-+"Language-Team: LANGUAGE <LL@li.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=ISO-8859-15\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "¿Debe ejecutarse adjtimex ahora y en cada arranque?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+#, fuzzy
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"Adjtimex puede ser ejecutado en el arranque del sistema para poner los "
-+"parámetros de tiempo del núcleo en /etc/default/adjtimex. Si usted solamente "
-+"quiere usar adjtimex para inspeccionar los parámetros actuales, conteste \"No"
-+"\"."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "¿Debe ejecutarse adjtimexconfig ahora?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"El guión adjtimexconfig usará adjtimex para encontrar los valores para el "
-+"núcleo de la señal y frecuencia que será tomada por el reloj del sistema "
-+"para estar de acuerdo con el reloj del hardware (también conocido como el "
-+"reloj CMOS). Este guión guardará los valores en el archivo de configuración /"
-+"etc/default/adjtimex para que los ajustes sean restaurados en cada arranque "
-+"del sistema, cuando /etc/init.d/adjtimex sea ejecutado."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"El guión toma 70 seg. para ser ejecutado. O bien, usted mismo puede ejecutar "
-+"adjtimexconfig más tarde, o determinar las variables del núcleo de varias "
-+"formas (mire la página man de adjtimex) y anótelos en /etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/pl.po
-+++ adjtimex-1.23/debian/po/pl.po
-@@ -0,0 +1,83 @@
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+#, fuzzy
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: PACKAGE VERSION\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-+"Last-Translator: Bartosz Zapa³owski <zapal@debian.linux.org.pl>\n"
-+"Language-Team: Polish Debian Documentation Project <pddp@debian.linux.org."
-+"pl>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=iso-8859-2\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Czy adjtimex ma byæ uruchomiany podczas instalacji i ka¿dego startu systemu?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex mo¿e byæ uruchamiany podczas ka¿dego uruchomienia systemu,by "
-+"ustawiæ parametry czasu w j±drze na warto¶ci znajduj±ce siê w pliku/etc/"
-+"default/adjtimex. Nie wyra¿aj zgody, je¶li chcesz u¿ywaæ adjtimextylko do "
-+"sprawdzania aktualnych warto¶ci."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Czy adjtimexconfig ma byæ uruchomiony podczas instalacji?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Skrypt adjtimexconfig skorzysta z programu adjtimex do znalezienia "
-+"takichwarto¶ci parametrów j±dra tick i frequency, ¿eby zegar systemowy by³ "
-+"zbli¿onydo zegara sprzêtowego (zegara CMOS). Nastêpnie zapisze ustawienia w "
-+"plikukonfiguracyjnym /etc/default/adjtimex, dziêki czemu warto¶ci te "
-+"bêd±przywrócane przy ka¿dym starcie systemu w momencie wykonywania skryptu/"
-+"etc/init.d/adjtimex."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Skrypt bêdzie dzia³a³ przez 70 sekund. Mo¿esz te¿ uruchomiæ "
-+"w³asnorêcznieadjtimexconfig w dowolnym czasie lub dobraæ paramterty j±dra w "
-+"innysposób (zapoznaj siê ze stron± manuala adjtimex) i zapisaæ je w pliku/"
-+"etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/nl.po
-+++ adjtimex-1.23/debian/po/nl.po
-@@ -0,0 +1,82 @@
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2003-10-04 16:05+0100\n"
-+"Last-Translator: Michiel Sikkes <michiel@sikkes.xs4all.nl>\n"
-+"Language-Team: Dutch <debian-l10n-dutch@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Wilt u dat adjtimex bij elke installatie en bij elke opstartprocedure "
-+"gedraaid wordt?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex kan gedraaid worden bij het opstarten van het systeem om de "
-+"kerneltijd parameters in te stellen zoals gedefinieerd in /etc/default/"
-+"adjtimex. Accepteer deze optie niet als u adjtimex wilt gebruiken om de "
-+"huidige parameters te bekijken."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Wilt u dat adjtimexconfig bij het installeren wordt gedraaid?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Het adjtimexconfig script zal adjtimex gebruiken om de eigenschappen voor de "
-+"kernelvariablen tick en frequency te vinden. Dit zal zorgen dat de "
-+"systeemklok gelijk loopt met de hardware klok (ook bekend onder de naam CMOS "
-+"klok). Het slaat deze eigenschappen op in het configuratiebestand /etc/"
-+"default/adjtimex, dus de instellingen worden bij elke "
-+"systeemopstartprocedure hersteld als /etc/init.d/adjtimex draait."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Het script doet er 70 seconden over om te draaien. Als alternatief kunt u "
-+"adjtimexconfig later handmatig draaien, of de kerneleigenschappen op een "
-+"andere manier bepalen (zie de adjtimex man-pagina) en deze zelf in /etc/"
-+"default/adjtimex zetten."
---- adjtimex-1.23.orig/debian/po/da.po
-+++ adjtimex-1.23/debian/po/da.po
-@@ -0,0 +1,79 @@
-+# translation of adjtimex_1.16-1-da.po to Danish
-+# translation of adjtimex_1.16-1_templates.po to Danish
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
-+#    Developers do not need to manually edit POT or PO files.
-+# Claus Hindsgaul <claus_h@image.dk>, 2004.
-+#
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex_1.16-1-da\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2004-03-24 17:57+0100\n"
-+"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n"
-+"Language-Team: Danish <dansk@klid.dk>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+"X-Generator: KBabel 1.3.1\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "Skal adjtimex køres under installation og ved hver opstart?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex kan køres under opstart af systemet for at sætte kernens "
-+"tidsparametre til værdierne i /etC/default/adjtimex. Acceptér ikke dette, "
-+"hvis du kun vil bruge adjtimex til at gennemse de aktuelle parametre."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Skal adjtimexconfig køres under installationen?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Skriftet adjtimexconfig vil bruge adjtimex til at finde de værdier til "
-+"kernevariablene tick og frequency, der vil få systemuret til at passe med "
-+"computerens indbyggede ur (CMOS-uret). Den gemmer derefter værdierne i "
-+"opsætningsfilen /etc/default/edjtimex, så indstillingerne bliver sat under "
-+"hver opstart, når skriptet /etC/init.d/adjtimex køres."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Det tager 70 sekunder at køre skriptet. Alternativt kan du selv køre "
-+"adjtimexconfig senere, eller finde kernevariablene på en anden måde (se "
-+"manualsiden adjtimex) og installere dem i /etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/ja.po
-+++ adjtimex-1.23/debian/po/ja.po
-@@ -0,0 +1,78 @@
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+#, fuzzy
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: PACKAGE VERSION\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2003-11-21 00:02+0900\n"
-+"Last-Translator: Hideki Yamane <henrich@samba.gr.jp>\n"
-+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=EUC-JP\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "adjtimex ¤ò¥¤¥ó¥¹¥È¡¼¥ë»þ¤ª¤è¤ÓËè²ó¤Îµ¯Æ°»þ¤ËÆ°ºî¤µ¤»¤Þ¤¹¤«?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex ¤ò¥·¥¹¥Æ¥à¤Îµ¯Æ°»þ¤ËÆ°ºî¤µ¤»¤Æ¥«¡¼¥Í¥ë¤Î»þ´Ö¥Ñ¥é¥á¡¼¥¿¤ò /etc/"
-+"default/adjtimex ¤ÎÃͤËÀßÄꤹ¤ë¤³¤È¤¬²Äǽ¤Ç¤¹¡£ adjtimex ¤ò¸½ºß¤Î¥Ñ¥é¥á¡¼¥¿¤Î"
-+"Ä´ºº¤Ë¤À¤±¤Ë»È¤¤¤¿¤¤¤È¤¤¤¦¾ì¹ç¤ÏÆ°ºî¤ò¤µ¤»¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "adjtimexconfig ¤ò¥¤¥ó¥¹¥È¡¼¥ë»þ¤ËÆ°ºî¤µ¤»¤Þ¤¹¤«?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"adjtimexconfig ¥¹¥¯¥ê¥×¥È¤Ï adjtimex ¤ò»ÈÍѤ·¤Æ¡¢¥·¥¹¥Æ¥à¥¯¥í¥Ã¥¯¤ò¥Ï¡¼¥É¥¦¥§"
-+"¥¢¥¯¥í¥Ã¥¯ (CMOS ¥¯¥í¥Ã¥¯¤È¤·¤Æ¤âÃΤé¤ì¤Æ¤¤¤Þ¤¹) ¤È¤ª¤ª¤è¤½Æ±´ü¤¹¤ë¤è¤¦¤Ë¥«¡¼"
-+"¥Í¥ëÊÑ¿ô tick ¤È frequency ¤ËÍ¿¤¨¤ëÃͤò¸«¤Ä¤±¤Þ¤¹¡£¤½¤·¤Æ¡¢¤³¤ÎÃͤòÀßÄê¥Õ¥¡¥¤"
-+"¥ë /etc/default/adjtimex ¤ËÊݸ¤¹¤ë¤³¤È¤ÇËè²óµ¯Æ°»þ¤Ë /etc/init.d/adjtimex ¤¬"
-+"Æ°ºî¤¹¤ëºÝ¤ËÀßÄ꤬Éü¸µ¤µ¤ì¤Þ¤¹¡£"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"¥¹¥¯¥ê¥×¥È¤ÏÆ°ºî¤Ë 70 É䫤«¤ê¤Þ¤¹¡£Ê̲ò¤È¤·¤Æ¤Ï adjtimexconfig ¤ò¸å¤Û¤É¼Â¹Ô"
-+"¤¹¤ë¡¢¤Þ¤¿¤Ï¾¤ÎÊýË¡¤Ç¥«¡¼¥Í¥ëÊÑ¿ô¤ò·è¤á¤Æ (adjtimex ¤Î man ¥Ú¡¼¥¸¤ò»²¾È)  /"
-+"etc/default/adjtimex ¤Ø¤ÎÀßÄê¤ò¹Ô¤¦¤Ê¤É¤¬²Äǽ¤Ç¤¹¡£"
---- adjtimex-1.23.orig/debian/po/pt_BR.po
-+++ adjtimex-1.23/debian/po/pt_BR.po
-@@ -0,0 +1,82 @@
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+#, fuzzy
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex_1.16-1\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2004-01-17 20:55-0300\n"
-+"Last-Translator: André Luís Lopes <andrelop@debian.org>\n"
-+"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=ISO-8859-1\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "Executar o adjtimex durante a instalação e a cada reinicialização ?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"O adjtimex pode ser executado na inicialização do sistema para definir "
-+"parâmetros de tempo de kernel para os valores em /etc/default/adjtimex. Não "
-+"aceite caso você somente queira usar o adjtimex para inspecionar os "
-+"parâmetros atuais."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Executar o adjtimexconfig durante a instalação ?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"O script adjtimex irá utilizar o adjtimex para encontrar valores para "
-+"variáveis de kernel tick e frequency que farão com que o relógio do sistema "
-+"concorde aproimadamente com o relógio de hardware (também conhecido como "
-+"relógio CMOS). Ele irá então gravar esses valores no arquivo de "
-+"configuração /etc/default/adjtimex de modo que as configurações sejam "
-+"restauradas a cada renicialização, quando o /etc/init.d/adjtimex é executado."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"O script leva cerca de 70 segundos para ser executado. Alternativamente, "
-+"você pode executar o adjtimexconfig você mesmo posteriormente, ou ainda "
-+"determinar as variáveis de kernel usando uma das diversas maneiras possíveis "
-+"(consulte a página de manul adjtimex) e instalar as mesmas em /etc/default/"
-+"adjtimex."
---- adjtimex-1.23.orig/debian/po/de.po
-+++ adjtimex-1.23/debian/po/de.po
-@@ -0,0 +1,83 @@
-+# translation of adjtimex_1.21.1-2_de.po to German
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
-+#    Developers do not need to manually edit POT or PO files.
-+#
-+# Erik Schanze <eriks@debian.org>, 2004-2007.
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex_1.21.1-2_de\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2007-08-06 20:50+0200\n"
-+"Last-Translator: Erik Schanze <eriks@debian.org>\n"
-+"Language-Team: German <debian-l10n-german@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+"X-Generator: KBabel 1.11.4\n"
-+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Soll Adjtimex nach der Installation und bei jedem Hochfahren gestartet "
-+"werden?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"Adjtimex kann beim Hochfahren des Systems ablaufen, um die Zeitparameter im "
-+"Kernel auf die Werte in /etc/defaults/adjtimex zu setzen. Stimmen Sie dem "
-+"nicht zu, wenn Sie mit Adjtimex nur die aktuellen Parameter ermitteln wollen."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Soll »adjtimexconfig« zur Installation aufgerufen werden?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Das Skript »adjtimexconfig« nutzt Adjtimex, um die Werte der Kernelvariablen "
-+"»tick« und »frequency« zu finden, damit die Systemuhr ungefähr mit der "
-+"Rechneruhr (auch bekannt als CMOS-Uhr) übereinstimmt. Das Skript speichert "
-+"diese Werte in der Konfigurationsdatei /etc/default/adjtimex, sodass die "
-+"Einstellung bei jedem Systemstart wiederhergestellt wird, wenn /etc/init.d/"
-+"adjtimex startet."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Das Skript benötigt 70 Sekunden, um durchzulaufen. Andererseits können Sie "
-+"»adjtimexconfig« später selbst starten oder finden die Kernelvariablen auf "
-+"einem anderen Weg (siehe Handbuchseite von Adjtimex) und speichern die Werte "
-+"in der Datei /etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/vi.po
-+++ adjtimex-1.23/debian/po/vi.po
-@@ -0,0 +1,75 @@
-+# Vietnamese Translation for adjtimex.
-+# Copyright © 2005 Free Software Foundation, Inc.
-+# Clytie Siddall <clytie@riverland.net.au>, 2005.
-+# 
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex 1.20-4\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2005-05-04 15:44+0930\n"
-+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
-+"Language-Team: Vietnamese <gnomevi-list@lists.sourceforge.net>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=utf-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+"Plural-Forms: nplurals=1; plural=0\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Bạn có muốn chạy trình adjtimex khi cài đặt và m�i khi khởi động không?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"Trình adjtimex (adjust time: đi�u chỉnh th�i gian) thì có thể chạy khi khởi "
-+"động hệ thống, để lập những tham số th�i gian của hạt nhân thành những giá "
-+"trị trong /etc/default/adjtimex. �ừng hiệu lực tùy ch�n này nếu bạn chỉ muốn "
-+"sử dụng trình adjtimex để kiểm tra những tham số hiện th�i."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Bạn có muốn chạy tập lệnh adjtimexconfig khi cài đặt không?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Tập lệnh adjtimexconfig (adjust time configuration: đi�u chỉnh cấu hình th�i "
-+"gian) thì sẽ dùng trinh adjtimex để tìm giá trị cho biến hạt nhân «tick» và "
-+"«frequency» để khớp đồng hồ hệ thống xấp xi với đồng hồ phần cứng (cũng được "
-+"biết như là đồng hồ CMOS). Như thế thì nó lưu nhưng giá trị này trong tập "
-+"tin cấu hình /etc/default/adjtimex vì vậy sẽ phục hồi cách thiết lập ấy m�i "
-+"khi khởi động, khi chạy /etc/init.d/adjtimex."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Tập lệnh này chạy được 70 giây. Hoặc bạn có thể tự chạy tập lệnh "
-+"adjtimexconfig vào lúc sau, hoặc quyết định những biến hạt nhân một của vài "
-+"cách khác (hãy xem trang hướng dẫn: lệnh\n"
-+"man adjtimex\n"
-+"mà «man» là trình hiển thị trang hướng dẫn), và cài đặt chúng vào /etc/"
-+"default/adjtimex."
---- adjtimex-1.23.orig/debian/po/cs.po
-+++ adjtimex-1.23/debian/po/cs.po
-@@ -0,0 +1,67 @@
-+# Czech translation of adjtimex templates
-+#
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex 1.20-3\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2005-4-10 22:13+0200\n"
-+"Last-Translator: Martin Sin <martin.sin@seznam.cz>\n"
-+"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=ISO-8859-2\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "Má být adjtimex spu¹tìn pøi instalaci a pøi ka¾dém spu¹tìní?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex mù¾e bì¾et pøi ka¾dém startu systému a nastavit parametry jádra na "
-+"hodnoty z /etc/default/adjtimex. Pøi nesouhlasu bude adjtimex nastaven na "
-+"zji¹tìní aktuálních parametrù."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Má být adjtimexconfig spu¹tìn pøi instalaci?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Skript adjtimexconfig pou¾ije adjtimex k nalezení hodnot pro promìnné "
-+"èasovaèe a frekvence jádra tak, ¾e nastaví systémové hodiny pøibli¾nì na "
-+"hodnotu hardwarových hodin (také známých jako CMOS hodiny). Pak ulo¾í tyto "
-+"hodnoty do konfiguraèního souboru /etc/default/adjtimex aby mohlo být "
-+"nastavení obnoveno pøi ka¾dém startu, v¾dy pøi spu¹tìní /etc/init.d/adjtimex."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Spu¹tìní skriptu zabere 70 sekund. Nebo mù¾ete spustit adjtimexconfig "
-+"samostatnì pozdìji, pøípadnì urèit promìnné jádra jedním z nìkolika rùzných "
-+"zpùsobù (podívejte se na manuálovou stránku adjtimex)  a umístìte je do /etc/"
-+"default/adjtimex."
---- adjtimex-1.23.orig/debian/po/pt.po
-+++ adjtimex-1.23/debian/po/pt.po
-@@ -0,0 +1,71 @@
-+# 2005-10-27 - Marco Ferra <mferra@sdf.lonestar.org> (initial translation)
-+#
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex 1.20-5\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2005-10-27 01:11+0100\n"
-+"Last-Translator: Marco Ferra <mferra@sdf.lonestar.org>\n"
-+"Language-Team: Portuguese <traduz@debianpt.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr ""
-+"Deve o adjtimex correr enquanto o instala e depois sempre que o sistema "
-+"inicia?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"O adjtimex pode correr quando o sistema inicia para ajustar os paramêtros "
-+"temporais do kernel para os valores especificados em /etc/default/adjtimex. "
-+"Por favor recuse se apenas deseja usar o adjtimex para inspecionar os "
-+"paramêtros actuais."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Deve o adjtimexconfig correr enquanto o instala?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"O script adjtimexconfig irá usar o comando adjtimex para encontrar os "
-+"valores para variáveis do kernel que o farão aproximar e estar de acordo com "
-+"o relógio por hardware (tambem conhecido pelo CMOS clock).  Este então "
-+"guarda esses valores no ficheiro /etc/default/adjtimex para que estes "
-+"paramêtros sejam reavidos sempre que o sistema inicia, nomeadamente quando "
-+"o /etc/init.d/adjtimex corre."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Este script demora 70 segundos a correr.  De forma alternativa pode correr o "
-+"adjtimexconfig por si próprio numa altura mais tarde ou determinar as "
-+"variáveis do kernel de outras formas (leia a página do manual do adjtimex) e "
-+"instale-os em /etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/po/sv.po
-+++ adjtimex-1.23/debian/po/sv.po
-@@ -0,0 +1,77 @@
-+# Translators, if you are not familiar with the PO format, gettext
-+# documentation is worth reading, especially sections dedicated to
-+# this format, e.g. by running:
-+# info -n '(gettext)PO Files'
-+# info -n '(gettext)Header Entry'
-+# Some information specific to po-debconf are available at
-+# /usr/share/doc/po-debconf/README-trans
-+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
-+# Developers do not need to manually edit POT or PO files.
-+# , fuzzy
-+# 
-+# 
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: adjtimex 1.20-5\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2005-10-11 16:31+0200\n"
-+"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
-+"Language-Team: Swedish <sv@li.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=iso-8859-1\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "Ska adjtimex köras vid installation och vid varje uppstart?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex kan köra vid systemets uppstart för att sätta kärntidsparametrar "
-+"till värdena i /etc/default/adjtimex. Acceptera inte om du bara vill använda "
-+"adjtimex för att inspektera de nuvarande parametrarna."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Ska adjtimexconfig köras vid installationstid?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Skriptet adjtimexconfig kommer att använda adjtimex för att hitta värden för "
-+"kärnvariablerna tick och frequency som gör att systemklockan kommer överens "
-+"med hårdvaruklockan (också kallad CMOS-klockan).  Den sparar sedan dessa "
-+"värden i konfigurationsfilen /etc/default/adjtimex så att inställningarna "
-+"kommer att användas vid varje uppstart, när /etc/init.d/adjtimex körs."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Skriptet tar 70 sekunder att köras. Alternativt kan du köra adjtimexconfig "
-+"själv vid en senare tid eller bestämma variabler för kärnan på ett eller "
-+"flera sätt (se adjtimes manualsida) och installera dom i /etc/default/"
-+"adjtimex)."
---- adjtimex-1.23.orig/debian/po/ru.po
-+++ adjtimex-1.23/debian/po/ru.po
-@@ -0,0 +1,80 @@
-+# translation of adjtimex_1.20-5_templates_ru.po to Russian
-+#
-+#    Translators, if you are not familiar with the PO format, gettext
-+#    documentation is worth reading, especially sections dedicated to
-+#    this format, e.g. by running:
-+#         info -n '(gettext)PO Files'
-+#         info -n '(gettext)Header Entry'
-+#    Some information specific to po-debconf are available at
-+#            /usr/share/doc/po-debconf/README-trans
-+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
-+#    Developers do not need to manually edit POT or PO files.
-+# Yuri Kozlov <kozlov.y@gmail.com>, 2005.
-+#
-+msgid ""
-+msgstr ""
-+"Project-Id-Version: template_adjtimex_1.20-5\n"
-+"Report-Msgid-Bugs-To: jrv@debian.org\n"
-+"POT-Creation-Date: 2007-08-06 21:41-0400\n"
-+"PO-Revision-Date: 2005-11-07 19:24+0300\n"
-+"Last-Translator: Yuri Kozlov <kozlov.y@gmail.com>\n"
-+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8bit\n"
-+"X-Generator: KBabel 1.9.1\n"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid "Should adjtimex be run at installation and at every startup?"
-+msgstr "Должен adjtimex быть запущен �ейча� и каждый раз при �тарте �и�темы?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:1001
-+msgid ""
-+"adjtimex can run at system startup to set the kernel time parameters to the "
-+"values in /etc/default/adjtimex. Don't accept if you just want to use "
-+"adjtimex to inspect the current parameters."
-+msgstr ""
-+"adjtimex можно запу�кать при �тарте �и�темы дл� у�тановки значений "
-+"параметров времени �дра из файла /etc/default/adjtimex. �е �оглашайте�ь, "
-+"е�ли про�то хотите и�пользовать adjtimex дл� проверки текущих параметров."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid "Should adjtimexconfig be run at installation time?"
-+msgstr "Должен adjtimexconfig быть запущен �ейча�?"
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The adjtimexconfig script will use adjtimex to find values for the kernel "
-+"variables tick and frequency that will make the system clock approximately "
-+"agree with the hardware clock (also known as the CMOS clock).  It then saves "
-+"these values in the configuration file /etc/default/adjtimex so the settings "
-+"will be restored on every boot, when /etc/init.d/adjtimex runs."
-+msgstr ""
-+"Сценарий adjtimexconfig и�пользует adjtimex дл� пои�ка значений переменных "
-+"�дра импуль�а �игнала и ча�тоты, которые помогают �огла�овывать �и�темные "
-+"ча�ы � аппаратными ча�ами (так называемые ча�ы CMOS). Затем он �охран�ет �ти "
-+"значени� в конфигурационный файл /etc/default/adjtimex, дл� того чтобы "
-+"во��танавливать их при каждой загрузке � помощью �ценари� /etc/init.d/"
-+"adjtimex."
-+
-+#. Type: boolean
-+#. Description
-+#: ../templates:2001
-+msgid ""
-+"The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
-+"yourself at a later time, or determine the kernel variables one of several "
-+"other ways (see the adjtimex man page) and install them in /etc/default/"
-+"adjtimex."
-+msgstr ""
-+"Длительно�ть работы �ценари� -- 70 �екунд. В каче�тве альтернативы вы можете "
-+"запу�тить adjtimexconfig вручную позже, или определить переменные �дра одним "
-+"из не�кольких других �по�обов (�мотрите �траницу руковод�тва по adjtimex) и "
-+"�охранить их в файл /etc/default/adjtimex."
---- adjtimex-1.23.orig/debian/README.Debian
-+++ adjtimex-1.23/debian/README.Debian
-@@ -0,0 +1,21 @@
-+adjtimex for DEBIAN
-+----------------------
-+
-+This is the Debian Linux prepackaged version of adjtimex.
-+
-+This package was put together by Jim Van Zandt <jrv@debian.org>,
-+who also maintains the program and therefore used the master sources.
-+
-+further Information:
-+
-+* adjtimex manpage
-+* copying policy 
-+	/usr/share/doc/adjtimex/copyright
-+	(or debian/copyright in the source package)
-+* changelog for debian package
-+	/usr/share/doc/adjtimex/changelog.Debian	 
-+* adjtimex's README:
-+	/usr/share/doc/adjtimex/README
-+
-+
-+James R. Van Zandt <jrv@debian.org>, Sun,  7 Mar 1999 21:58:51 -0500
---- adjtimex-1.23.orig/debian/templates
-+++ adjtimex-1.23/debian/templates
-@@ -0,0 +1,22 @@
-+Template: adjtimex/run_daemon
-+Type: boolean
-+Default: true
-+_Description: Should adjtimex be run at installation and at every startup?
-+ adjtimex can run at system startup to set the kernel time parameters to
-+ the values in /etc/default/adjtimex. Don't accept if you just want to
-+ use adjtimex to inspect the current parameters.
-+
-+Template: adjtimex/compare_rtc
-+Type: boolean
-+Default: true
-+_Description: Should adjtimexconfig be run at installation time?
-+ The adjtimexconfig script will use adjtimex to find values for the kernel
-+ variables tick and frequency that will make the system clock approximately
-+ agree with the hardware clock (also known as the CMOS clock).  It then
-+ saves these values in the configuration file /etc/default/adjtimex so the
-+ settings will be restored on every boot, when /etc/init.d/adjtimex runs.
-+ .
-+ The script takes 70 sec to run. Alternatively, you can run adjtimexconfig
-+ yourself at a later time, or determine the kernel variables one of several
-+ other ways (see the adjtimex man page) and install them in
-+ /etc/default/adjtimex.
---- adjtimex-1.23.orig/debian/changelog
-+++ adjtimex-1.23/debian/changelog
-@@ -0,0 +1,530 @@
-+adjtimex (1.23-1) unstable; urgency=low
-+
-+  * New upstream release
-+
-+  * adjtimex.c (compare): In case of absence of /etc/adjtime, do not fail,
-+    and do not force users to manually create it with 0.0
-+    content. Instead, proceed assuming zero values (meaning RTC does not
-+    drift). Also replace redundant code by a call to
-+    get_cmos_adjustment(). README: Rewrite USAGE paragraph. Remove point
-+    about creating zero adjfile. Document new behaviour without
-+    adjfile. Remove reference to the long outdated clock(8). Update URL
-+    for hwclock(8).  (Thanks to Alain Guibert <alguibert@free.fr>,
-+    closes:bug#445448)
-+
-+  * adjtimex.c (busy_wait): timestamp more closely the RTC clock beat
-+    (thanks to Alain Guibert <alguibert at free.fr>, see Debian
-+    bug#443814). (usage): --directisa switch forces adjtimex to poll the
-+    update-in-process (UIP) flag of the CMOS clock (thanks to Alain
-+    Guibert <alguibert at free.fr>, closes:bug#443773).
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sat, 06 Oct 2007 21:57:04 -0400
-+
-+adjtimex (1.22-1) unstable; urgency=low
-+
-+  * New upstream release: fix these bugs in ntpdate output
-+    interpretation (closes:bug#438718):
-+    adjtimex has a bug in evaluating the output of ntpdate, because
-+        1. it assumes ntpdate outputs "adjust time server", but ntpdate
-+    may output "step time server" also
-+        2. it doesnt stop at last line but as soon as it has found "filter
-+    offset:" lines, and because of this it will not find the "offset ..."
-+    information in the last line.
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 23 Sep 2007 12:51:52 -0400
-+
-+adjtimex (1.21.1-3) unstable; urgency=low
-+
-+  * update German translation of debconf templates, thanks to Erik Schanze
-+    <eriks@debian.org> and Helge Kreutzmann
-+    <debian@helgefjell.de>(closes:#436080)
-+  
-+  * debian/rules don't ignore failure of "make distclean"
-+  
-+  * debian/adjtimex.init: make LSB compliant
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Mon, 06 Aug 2007 21:39:47 -0400
-+
-+adjtimex (1.21.1-2) unstable; urgency=low
-+
-+  * Update French translation of debconf templates, thanks to Christian
-+    Perrier <bubulle@debian.org> (closes:Bug#403472)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun,  7 Jan 2007 18:10:32 -0500
-+
-+adjtimex (1.21.1-1) unstable; urgency=low
-+
-+  * New upstream release.
-+
-+  * adjtimex.c: don't declare adjtimex syscall (should already be getting
-+    the declaration from sys/timex.h) Thanks to Andreas Jochens
-+    <aj@andaco.de> (closes:#390989)
-+  
-+ -- James R. Van Zandt <jrv@debian.org>  Sat,  7 Oct 2006 08:04:52 -0400
-+
-+adjtimex (1.21-2) unstable; urgency=low
-+
-+  * Makefile: correct version number to 1.21 (error in importing upstream
-+    sources)
-+    
-+  * debian/control: depend on po-debconf
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Fri,  6 Oct 2006 20:41:00 -0400
-+
-+adjtimex (1.21-1) unstable; urgency=low
-+
-+  * New upstream release.  use /dev/rtc if available (closes:#196692). Use
-+    heuristic to correct for DST changes or lacking --utc flag
-+    (closes:#308396). check return code in probe_time() so if root
-+    privileges are needed (e.g. "adjtimex -r") and lacking, command will
-+    fail rather than printing bogus results. (closes:#364060)
-+
-+  * debian/postinst: start with invoke-rc.d if available (closes:#367746)
-+  
-+  * debian/control: update to policy 3.7.2
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sat, 20 May 2006 08:33:05 -0400
-+
-+adjtimex (1.20-7) unstable; urgency=low
-+
-+  * debian/README.Debian: correct references to files, which are no longer
-+    in /usr/doc/adjtimex (closes:#365761)
-+  * debian/rules: declare debhelper compat level 5
-+  * debian/control: build-depends on debhelper ver 5
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Thu,  4 May 2006 21:54:33 -0400
-+
-+adjtimex (1.20-6) unstable; urgency=low
-+
-+  * control: depend on debconf | debconf-2.0 (closes: #331733), update to
-+    policy 3.6.2
-+  * debian/po/de.po: fix spelling error in German translation, thanks to
-+    Philipp Meier <meier@meisterbohne.de> (closes: #279254)
-+  * debian/po/sv.po: Swedish translation for debconf template, courtesy
-+    of Daniel Nylander <yeager@lidkoping.net> (closes: #333124)
-+  * debian/po: Add Portugese  translation for debconf template, courtesy of
-+    Miguel Figueiredo <elmig@debianpt.org> (closes: #336333)
-+  * debian/po: Add Russian translation for debconf template, courtesy of
-+    Yuri Kozlov <kozlov.y@gmail.com> (closes: #337967)
-+  * debian/copyright: update FSF address.
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Fri, 25 Nov 2005 21:04:08 -0500
-+
-+adjtimex (1.20-5) unstable; urgency=low
-+
-+  * debian/po/vi.po: Vietnamese translation for debconf template, courtesy
-+    of Clytie Siddall <clytie@riverland.net.au> (closes:Bug#307600)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sat,  7 May 2005 11:58:47 -0400
-+
-+adjtimex (1.20-4) unstable; urgency=low
-+
-+  * debian/po/cs.po: Czech translation for debconf template, courtesy of
-+    Martin Šín <martin.sin@seznam.cz> (closes:Bug#304377)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Mon, 25 Apr 2005 20:14:42 -0400
-+
-+adjtimex (1.20-3) unstable; urgency=low
-+
-+  * debian/adjtimex.init: adjust printout to conform to Debian standard,
-+    output error to stderr (Thanks to Thomas Hood, closes:bug#294824)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 13 Mar 2005 17:20:28 -0500
-+
-+adjtimex (1.20-2) unstable; urgency=low
-+
-+  * debian/po/de.po: replace corrupted file (closes: #250250)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Mon, 20 Sep 2004 20:08:47 -0400
-+
-+adjtimex (1.20-1) unstable; urgency=low
-+
-+  * New upstream release
-+
-+  * adjtimex.c (compare): in "compare" or "adjust", return immediately
-+    after printing last result, instead of sleeping an extra $interval
-+    seconds. (Thanks to Alain Guibert <derogaton at oreka.com>,
-+    closes:Bug#243652)
-+
-+  * postinst: remove /etc/rcS.d/S20adjtimex link if configured not to run
-+    at startup (thanks to Mario 'BitKoenig' Holbe, closes:Bug#267229)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 19 Sep 2004 12:41:37 -0400
-+
-+adjtimex (1.19-1) unstable; urgency=high
-+
-+  * copyright: report upstream source address (closes:Bug#269691)
-+
-+  * control: don't depend on either mawk or awk, since either works and
-+    awk is required (closes:Bug#267228)
-+
-+  * New upstream release
-+
-+  * adjtimex.c (compare): Account for the current frequency value
-+  when calculating the recommended frequency value.  Simplify
-+  calculation of recommended tick. (compare): print estimated system 
-+  error in ppm instead of obscure "second diff".
-+
-+  * adjtimex.8: use 2^16 instead of the more obscure 1<<16.
-+
-+  * adjtimex.c: revert to poll-wait instead of using /dev/rtc, because the
-+    latter only provides time with one second precision and so gives
-+    wildly inaccurate adjustments. (closes:Bug#269498,Bug#265839)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sat, 11 Sep 2004 16:01:52 -0400
-+
-+adjtimex (1.18-1.1) unstable; urgency=medium
-+
-+  * Non-maintainer upload prepared by Joshua Kwan and Ken Bloom.
-+  * Applied patch from Jurij Smakov <jurij@wooyd.org> to #263401:
-+    - Fixes the regular expression used to extract the baseline value 
-+      from the adjtimex output. Closes: #263401
-+    - Replaces non-POSIX compliant calls to ('tail -1') by the 
-+      POSIX-compliant ones ('tail -n 1')
-+    - Cosmetic changes to the adjtimexconfig output, making it 
-+      consistent with the general Debian style.
-+  * Add German debconf template translations (closes: #250250)
-+
-+ -- Ken Bloom <kabloom@ucdavis.edu>  Thu, 12 Aug 2004 23:34:33 -0700
-+
-+adjtimex (1.18-1) unstable; urgency=low
-+
-+  * New upstream release
-+  
-+  * call reset_time_status() only when explicitly told to (thanks to Alain
-+    Guibert <derogaton at oreka.com>, closes:bug#243031)
-+
-+  * Add debconf translations for Japanese (closes:bug#223462), Danish
-+    (closes:bug#239865), and Brazilian Portuguese (closes:bug#228281).
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 11 Apr 2004 18:32:33 -0400
-+
-+adjtimex (1.17-1) unstable; urgency=low
-+
-+  * New upstream release
-+
-+  * control: compliant with Debian policy version 3.6.1
-+
-+  * es.po: decode "quoted-printable" encoding.
-+  
-+  * adjtimex.c: update email 
-+    (main): If adjtimex() returns an error, print HZ and legal ranges
-+    for tick and freq.  (thanks to Sami Farin <safari at iki.fi>)
-+    (review): calculate reasonable tick and frequency when HZ != 100.
-+    (cmos_init): use /dev/rtc when available (thanks to Richard
-+    Henderson <rth at twiddle.net>).
-+
-+  * adjtimex.c: --status switch sets clock status (courtesy of Alain
-+    Guibert <derogaton at oreka.com>) (closes:bug#242732)
-+
-+  * adjtimexconfig: set reasonable tick and frequency when HZ !=
-+    100. (closes:Bug#241726)
-+
-+  * adjtimex.c (longopt): fix spelling to match documentation: --esterror
-+    and --maxerror (thanks to Alain Guibert) (fixes:Bug#241863)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sat,  3 Apr 2004 21:13:09 -0500
-+
-+adjtimex (1.16-3) unstable; urgency=low
-+
-+  * Dutch translation of gettext debconf templates (courtesy of  Michiel Sikkes, closes:bug#215162)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 12 Oct 2003 17:33:55 -0400
-+
-+adjtimex (1.16-2) unstable; urgency=low
-+
-+  * Polish translation of gettext debconf templates (courtesy of  Bartosz
-+    Zapalowski, closes:bug#208955)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun,  7 Sep 2003 16:26:30 -0400
-+
-+adjtimex (1.16-1) unstable; urgency=low
-+
-+  * New upstream release (closes:Bug#204382)(closes:Bug#204377)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun, 24 Aug 2003 20:52:32 -0400
-+
-+adjtimex (1.15.1-2) unstable; urgency=low
-+
-+  * gettext-based debconf templates (closes:bug#205788)
-+  * French translation of gettext debconf templates (closes:Bug#206430)
-+  * Spanish translation of gettext debconf templates (closes:Bug#197485)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 24 Aug 2003 18:01:56 -0400
-+
-+adjtimex (1.15.1-1) unstable; urgency=low
-+
-+  * New upstream release. Add explicit newlines in multi-line help text
-+    (closes:bug#194858) 
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 31 May 2003 20:53:14 -0400
-+
-+adjtimex (1.15-1) unstable; urgency=low
-+
-+  * New upstream release.  Now compiles on ia64 (closes:bug#141655).
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Wed, 30 Apr 2003 19:38:11 -0400
-+
-+adjtimex (1.14-1) unstable; urgency=low
-+
-+  * New Upstream Release.  Expanded documentation (closes:bug#142967)
-+  * convert to debhelper
-+  * debian/control: depend on debconf
-+  * debian/postinst: configure adjtimex to run on startup, and run
-+    adjtimexconfig on installation, only if asked by sysadmin (via
-+    debconf) (closes:bug#158047)
-+  * debian/postrm: purge debconf db entry
-+  * debian/adjtimexconfig: config file is now /etc/default/adjtimex
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun, 27 Apr 2003 21:28:40 -0400
-+
-+adjtimex (1.13-1) unstable; urgency=low
-+
-+  * New upstream release (closes:Bug#127483)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun,  6 Jan 2002 21:06:23 -0500
-+
-+adjtimex (1.12-3) unstable; urgency=low
-+
-+  * New maintainer email (fix remaining references)
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun,  9 Dec 2001 15:25:06 -0500
-+
-+adjtimex (1.12-2) unstable; urgency=low
-+
-+  * New maintainer email
-+
-+ -- James R. Van Zandt <jrv@debian.org>  Sun,  9 Dec 2001 13:24:59 -0500
-+
-+adjtimex (1.12-1) unstable; urgency=low
-+
-+  * New upstream release
-+  * debian/control: move Build-Depends entry to source section
-+    (closes:bug#91928).  Policy version 3.5.2 
-+  * debian/rules: by default, compile without -g option.  Honor
-+    DEB_BUILD_OPTIONS.  
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Wed, 22 Nov 2000 01:37:58 -0500
-+
-+adjtimex (1.11-3) unstable; urgency=low
-+
-+  * adjtimexconfig: install new values in /etc/adjtimex.conf rather than
-+    the startup script /etc/init.d/adjtimex (thanks to Zsolt Szabo
-+    <szazs@mm.bme.hu>).
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 30 Sep 2000 09:34:58 -0400
-+
-+adjtimex (1.11-2) unstable; urgency=low
-+
-+  * build-depends on debmake
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun,  3 Sep 2000 13:50:02 -0400
-+
-+adjtimex (1.11-1) unstable; urgency=low
-+
-+  * /etc/init.d/adjtimex: restart|force-reload also run adjtimex
-+    (closes:bug#69514), add comment explaining precedence of
-+    /etc/adjtimex.conf 
-+
-+  * New upstream release
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 28 Aug 2000 21:19:48 -0400
-+
-+adjtimex (1.10-1) frozen unstable; urgency=high
-+
-+  * New upstream release - security fix: use popen() to recover output from
-+    ntpdate, instead of an unsafe temporary file (thanks to Colin Phipps
-+    <crp22@cam.ac.uk>) (closes:bug#56752)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Tue,  1 Feb 2000 21:29:03 -0500
-+
-+adjtimex (1.9-2) unstable; urgency=low
-+
-+  * Suggest ntpdate (closes:bug#56751)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 31 Jan 2000 19:26:16 -0500
-+
-+adjtimex (1.9-1) unstable; urgency=low
-+
-+  * New upstream release
-+  * Removed pointer to /usr/doc/copyright/GPL
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon,  3 Jan 2000 21:34:59 -0500
-+
-+adjtimex (1.8.1-1) unstable; urgency=low
-+
-+  * New upstream release (closes:bug#52637)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Thu, 16 Dec 1999 20:13:43 -0500
-+
-+adjtimex (1.8-4) unstable; urgency=low
-+
-+  * Change references from /usr/sbin/adjtimex to /sbin/adjtimex in
-+    adjtimexconfig
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Tue,  2 Nov 1999 20:21:48 -0500
-+
-+adjtimex (1.8-3) unstable; urgency=low
-+
-+  * *Really* install binary into /sbin, so it is available
-+    even if /usr is not mounted (closes:Bug#44399)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 30 Oct 1999 17:57:57 -0400
-+
-+adjtimex (1.8-2) unstable; urgency=low
-+
-+  * Install compatibility symlink /usr/doc/adjtimex.
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun, 24 Oct 1999 10:54:01 -0400
-+
-+adjtimex (1.8-1) unstable; urgency=low
-+
-+  * New upstream release: Install binary into /sbin, so it is available
-+    even if /usr is not mounted (closes:Bug#44399)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon,  6 Sep 1999 13:08:15 -0400
-+
-+adjtimex (1.7-2) unstable; urgency=low
-+
-+  * Link against glibc2.1
-+  * Upgrade to FHS
-+  * Include full license statement in copyright file
-+  * Revise GPL reference in copyright file
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat,  4 Sep 1999 12:04:34 -0400
-+
-+adjtimex (1.7-1) unstable; urgency=low
-+
-+  * install configuration file in /etc/init.d rather than /etc/rc.boot
-+  closes: #30120, #32436.
-+  * New upstream release (incorporates Paul Slootman's alpha patch)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 28 Nov 1998 20:33:38 -0500
-+
-+adjtimex (1.6-2) unstable; urgency=low
-+
-+  * corrected reference in man page: clock -> hwclock (Bug#27854)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 24 Oct 1998 14:40:45 -0400
-+
-+adjtimex (1.6-1.1) unstable; urgency=low
-+
-+  * non-maintainer (binary-only) upload for Alpha
-+  * changed architecture back to 'any'. Why should it be i386 only?
-+  * don't use syscall1() to declare adjtimex() for Alpha
-+
-+ -- Paul Slootman <paul@debian.org>  Tue,  8 Sep 1998 20:42:52 +0200
-+
-+adjtimex (1.6-1) unstable; urgency=low
-+
-+  * New upstream release: Default log file is "/var/log/clocks.log".
-+    Create log file if it does not exist. (Bug#25834)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 22 Aug 1998 20:33:22 -0400
-+
-+adjtimex (1.5-3) unstable; urgency=low
-+
-+  * architecture is i386 only
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 29 Jun 1998 19:35:22 -0400
-+
-+adjtimex (1.5-2) unstable; urgency=low
-+
-+  * eliminate question in postinst, by eliminating postinst entirely
-+    (Bug#22288) 
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun,  7 Jun 1998 20:51:42 -0400
-+
-+adjtimex (1.5-1) frozen unstable; urgency=low
-+
-+  * New upstream release.  No functional changes, but adjtimex is now
-+    covered by the GNU GPL. (Bug#21358)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 20 Apr 1998 21:38:53 -0400
-+
-+adjtimex (1.4-2) unstable; urgency=low
-+
-+  * Ensure that changelog is compressed *before* calculating md5sum
-+    (Bug#19266)
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 14 Mar 1998 20:47:52 -0500
-+
-+adjtimex (1.4-1) unstable; urgency=low
-+
-+  * New upstream release.  Log times for long-term estimation of drifts.
-+
-+ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Thu, 11 Dec 1997 21:48:01 -0500
-+
-+adjtimex (1.3-3) stable; urgency=medium
-+
-+  * Moved temporary files from /tmp to /etc, to eliminate security
-+    hole (bug #11610).
-+
-+ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Sun, 3 Aug 1997 11:34:48 -0400
-+
-+adjtimex (1.3-2) stable; urgency=medium
-+
-+  * Removed conflict with xntp, since ntpdate from the xntp package
-+    is still compatible with adjtimex.
-+
-+ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Wed, 12 Mar 1997 21:01:05 -0500
-+
-+adjtimex (1.3-1) unstable; urgency=HIGH
-+
-+  * New upstream version: Previous version allows 2.0 kernel to reset
-+    the CMOS clock periodically.  Now using different method of
-+    preventing this.
-+  * New --compare switch to compare system and CMOS clocks (replacing
-+    the separate program clockdiff) and suggest better values of time
-+    parameters.  New --adjust switch to actually install the suggested
-+    values.  GNU format long switches, including --help and --version.
-+  * Revised conftimex to use --adjust switch instead of clockdiff.
-+  * Renamed conftimex to adjtimexconfig per Debian recommendation.
-+  * Added conftimex man page.
-+  * Revised messages in postinst to better explain what is going on.
-+  * Conflicts with xntp
-+  * New maintainer
-+
-+ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Sat, 1 Mar 1997 18:03:35 -0500
-+
-+adjtimex (1.2-5) unstable; urgency=LOW
-+
-+  * New packaging format
-+  * Corrected comment in /etc/rc.boot/adjtimex
-+  * Corrected the installation of doc files
-+
-+ -- Michael Meskes <meskes@debian.org>  Wed, 18 Sep 1996 09:22:51 +0200
-+
-+Fri May 17 12:48:07 MET DST 1996 Michael Meskes (meskes@debian.org)
-+
-+	adjtimex (1.2-1):
-+	
-+	* Added Debian Linux package maintenance system files.
-+
-+Fri May 17 20:39:30 MET DST 1996 Michael Meskes	(meskes@debian.org)
-+
-+        adjtimex (1.2-2):
-+
-+	* Corrected mode for /etc/rc.boot/adjtimex
-+
-+	* Added conftimex script
-+
-+	* Automatically configure system
-+
-+Sun Jun 30 13:17:53 MET DST 1996 Michael Meskes (meskes@debian.org)
-+
-+        adjtimex (1.2-3):
-+
-+	* Corrected rules file for new naming scheme
-+
-+	* Gzip manpage
-+
-+	* Strip binaries
-+
-+Tue Jul  2 10:01:35 MET DST 1996 Michael Meskes (meskes@debian.org)
-+
-+        adjtimex (1.2-4):
-+
-+	* Really say what we're doing in postinst (Bug#3474)
-+
-+
---- adjtimex-1.23.orig/debian/dirs
-+++ adjtimex-1.23/debian/dirs
-@@ -0,0 +1,4 @@
-+usr/bin
-+usr/sbin
-+sbin
-+usr/share/man/man8
---- adjtimex-1.23.orig/debian/postrm
-+++ adjtimex-1.23/debian/postrm
-@@ -0,0 +1,25 @@
-+#! /bin/sh -e
-+
-+case "$1" in
-+    purge)
-+	rm -f /etc/adjtimex.conf /etc/default/adjtimex
-+	update-rc.d adjtimex remove >/dev/null
-+	if [ -e /usr/share/debconf/confmodule ]; then
-+          # Source debconf library.
-+	    . /usr/share/debconf/confmodule
-+          # Remove my changes to the db.
-+echo "removing debconf db entries"
-+	    db_purge
-+echo "removed debconf db entries"
-+	fi
-+	;;
-+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-+	exit 0
-+	;;
-+    *)
-+	echo "postrm called with unknown argument \`$1'" >&2
-+	exit 0
-+	;;
-+esac
-+
-+#DEBHELPER#
---- adjtimex-1.23.orig/debian/copyright
-+++ adjtimex-1.23/debian/copyright
-@@ -0,0 +1,28 @@
-+This package was debianized by James R. Van Zandt jrv@debian.org on
-+Thu, 11 Dec 1997 21:48:01 -0500.
-+
-+This package was put together by Jim Van Zandt <jrv@debian.org>,
-+who also maintains the program and therefore used the master sources.
-+
-+Copyright:
-+
-+adjtimex is Copyright (C) 1997 Steven S. Dick and James R. Van Zandt
-+
-+   This program is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU General Public License as
-+   published by the Free Software Foundation; version 2 dated June,
-+   1991, or any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+   02110-1301, USA.
-+
-+On Debian GNU/Linux systems, the complete text of the GNU Public
-+License can be found in `/usr/share/common-licenses/'
-+
---- adjtimex-1.23.orig/debian/rules
-+++ adjtimex-1.23/debian/rules
-@@ -0,0 +1,113 @@
-+#!/usr/bin/make -f
-+# Sample debian/rules that uses debhelper.
-+# GNU copyright 1997 to 1999 by Joey Hess.
-+
-+# Uncomment this to turn on verbose mode.
-+#export DH_VERBOSE=1
-+
-+# These are used for cross-compiling and for saving the configure script
-+# from having to guess our platform (since we know it already)
-+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-+
-+
-+package=adjtimex
-+
-+CFLAGS = -Wall -g
-+INSTALL = install
-+INSTALL_FILE    = $(INSTALL) -p    -o root -g root  -m  644
-+INSTALL_PROGRAM = $(INSTALL) -p    -o root -g root  -m  755
-+INSTALL_SCRIPT  = $(INSTALL) -p    -o root -g root  -m  755
-+INSTALL_DIR     = $(INSTALL) -p -d -o root -g root  -m  755
-+
-+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-+CFLAGS += -O0
-+else
-+CFLAGS += -O2
-+endif
-+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
-+INSTALL_PROGRAM += -s
-+endif
-+
-+
-+config.status: configure
-+	dh_testdir
-+	# configure the package.
-+	./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
-+
-+
-+build: build-stamp
-+
-+build-stamp:  config.status
-+	dh_testdir
-+
-+	# compile the package.
-+	$(MAKE) CFLAGS="$(CFLAGS)"
-+	#/usr/bin/docbook-to-man debian/adjtimex.sgml > adjtimex.1
-+
-+	touch build-stamp
-+
-+clean:
-+	dh_testdir
-+	dh_testroot
-+	rm -f build-stamp 
-+
-+	# clean up after the build process.
-+	debconf-updatepo
-+	[ ! -f Makefile ] || $(MAKE) veryclean
-+	rm -rf adjtimex *.o config.*
-+	-test -r /usr/share/misc/config.sub && \
-+	  cp -f /usr/share/misc/config.sub config.sub
-+	-test -r /usr/share/misc/config.guess && \
-+	  cp -f /usr/share/misc/config.guess config.guess
-+
-+
-+	dh_clean
-+
-+install: build
-+	dh_testdir
-+	dh_testroot
-+	dh_clean -k
-+	dh_installdirs
-+
-+	# install the package into debian/$(package).
-+	$(INSTALL_PROGRAM) adjtimex $(CURDIR)/debian/$(package)/sbin
-+	$(INSTALL_SCRIPT)  debian/adjtimexconfig			\
-+		$(CURDIR)/debian/$(package)/usr/sbin/adjtimexconfig
-+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+# We have nothing to do
-+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+	dh_testdir
-+	dh_testroot
-+	dh_installdebconf	
-+	dh_installdocs
-+	dh_installexamples
-+	dh_installmenu
-+#	dh_installlogrotate
-+#	dh_installemacsen
-+#	dh_installpam
-+#	dh_installmime
-+	dh_installinit -n
-+	dh_installcron
-+	dh_installman adjtimex.8 debian/adjtimexconfig.8
-+	dh_installinfo
-+#	dh_undocumented
-+	dh_installchangelogs ChangeLog
-+	dh_link
-+	dh_strip
-+	dh_compress
-+	dh_fixperms
-+#	dh_makeshlibs
-+	dh_installdeb
-+#	dh_perl
-+	dh_shlibdeps
-+	dh_gencontrol
-+	dh_md5sums
-+	dh_builddeb
-+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install 
---- adjtimex-1.23.orig/debian/docs
-+++ adjtimex-1.23/debian/docs
-@@ -0,0 +1,2 @@
-+README
-+README.ru
---- adjtimex-1.23.orig/debian/adjtimexconfig
-+++ adjtimex-1.23/debian/adjtimexconfig
-@@ -0,0 +1,67 @@
-+#!/bin/sh
-+
-+conffile=/etc/default/adjtimex
-+startfile=/etc/init.d/adjtimex
-+
-+echo -n "Comparing clocks (this will take 70 sec)..."
-+
-+# Get the parameters
-+
-+/sbin/adjtimex --print --tick 0  >/etc/adj.adjust  2>/dev/null
-+baseline=`awk '/<= tick/{print ($1+$NF)/2}' /etc/adj.adjust`
-+hz=`awk '/USER_HZ/{print $3}' /etc/adj.adjust`
-+/sbin/adjtimex  --tick $baseline  --frequency 0
-+/sbin/adjtimex  --adjust  >/etc/adj.adjust
-+echo "done."
-+ticks=`tail -n 1 /etc/adj.adjust|awk '{print $6}'`
-+freq=`tail -n 1 /etc/adj.adjust|awk '{print $7}'`
-+# cat /etc/adj.adjust
-+# echo hz=$hz baseline=$baseline ticks=$ticks freq=$freq
-+rm /etc/adj.adjust
-+adjt=`awk "BEGIN{print (($ticks-$baseline)*$hz + $freq/65536.)*.0864}"`
-+echo -n "Adjusting system time by ${adjt} sec/day to agree with CMOS clock..."
-+
-+# Recreate /etc/adjtimex.conf if necessary
-+
-+if [ -f $conffile ]; then 
-+#   echo "using existing $conffile";
-+    true;
-+else 
-+cat >$conffile <<EOF
-+#  $conffile - configuration file for adjtimex(8)
-+#
-+#  you may adjust these values manually or by calling /usr/sbin/adjtimexconfig
-+#
-+#  This file is sourced by $startfile
-+#
-+TICK=$TICK
-+FREQ=$FREQ
-+
-+EOF
-+fi
-+
-+# Reset values in $conffile
-+
-+sed -e "s/^TICK=.*/TICK=$ticks/"		\
-+    -e "s/^FREQ=.*/FREQ=$freq/"			\
-+    $conffile >$conffile.TMP &&			\
-+    mv $conffile.TMP $conffile
-+
-+# grep "TICK=" /etc/init.d/adjtimex | cut -d'#' -f1 > /etc/adj.tick
-+# grep "FREQ=" /etc/init.d/adjtimex | cut -d'#' -f1 > /etc/adj.freq
-+# 
-+# TICKLINE="`echo -n "TICK="$ticks" # old: "; cat /etc/adj.tick`"
-+# FREQLINE="`echo -n "FREQ="$freq" # old: "; cat /etc/adj.freq`"
-+# 
-+# cp /etc/init.d/adjtimex /etc/init.d/adjtimex.TMP
-+# sed -e "s/^TICK=.*/$TICKLINE/" -e "s/^FREQ=.*/$FREQLINE/" \
-+#  < /etc/init.d/adjtimex.TMP > /etc/init.d/adjtimex
-+# 
-+# if [ -s /etc/init.d/adjtimex ]
-+# then
-+# 	  rm -f /etc/init.d/adjtimex.TMP
-+# fi
-+# rm -f /etc/adj.tick /etc/adj.freq /etc/adj.adjust
-+rm -f /etc/adj.adjust
-+echo "done."
-+
---- adjtimex-1.23.orig/debian/adjtimexconfig.8
-+++ adjtimex-1.23/debian/adjtimexconfig.8
-@@ -0,0 +1,41 @@
-+.\"{{{  Title                    Emacs major mode should be: -*- nroff -*-
-+.TH ADJTIMEXCONFIG 8 "April 27, 2003"
-+.\"}}}
-+.\"{{{  Name
-+.SH NAME
-+adjtimexconfig \- find kernel clock variables and save for reboots
-+.\"}}}
-+.\"{{{  Synopsis
-+.SH SYNOPSIS
-+.ad l
-+.\" commands only
-+.B /sbin/adjtimexconfig
-+.\"}}}
-+.\"{{{  Config
-+.SH DESCRIPTION
-+This script uses \fBadjtimex\fP(8) to find values for the kernel
-+variables \fBtick\fP and \fBfrequency\fP that will make the system
-+clock approximately agree with the CMOS clock.  It then saves these
-+values in the configuration file \fI/etc/default/adjtimex\fP so the
-+settings will be restored on every boot, when
-+\fI/etc/init.d/adjtimex\fP runs.
-+.P
-+\fPadjtimexconfig\fP uses the drift rate recorded in
-+\fI/etc/adjtime\fP to adjust the times it reads from the CMOS clock.
-+If you find the CMOS clock has a systematic drift, read the
-+\fBclock\fP(8) or \fBhwclock\fP(8) manual page, modify
-+\fI/etc/adjtime\fP as required, and run \fBadjtimexconfig\fP again.
-+.SH AUTHOR
-+Michael Meskes <meskes@debian.org>.
-+.\"}}}
-+.\"{{{
-+.SH FILES
-+.nf
-+\fI/etc/default/adjtimex\fP
-+\fI/etc/init.d/adjtimex\fP
-+.fi
-+.\"}}}
-+.\"{{{  See also
-+.SH "SEE ALSO"
-+.BR adjtimex "(8), "clock "(8), "hwclock "(8), "ntpd (8)
-+.\"}}}
---- adjtimex-1.23.orig/debian/config
-+++ adjtimex-1.23/debian/config
-@@ -0,0 +1,8 @@
-+#! /bin/sh -e
-+
-+# Source debconf library.
-+. /usr/share/debconf/confmodule
-+
-+db_input medium adjtimex/run_daemon || true
-+db_input medium adjtimex/compare_rtc || true
-+db_go
---- adjtimex-1.23.orig/debian/postinst
-+++ adjtimex-1.23/debian/postinst
-@@ -0,0 +1,119 @@
-+#! /bin/sh
-+
-+set -e
-+
-+# Source debconf library.
-+. /usr/share/debconf/confmodule
-+
-+#		 old scripts
-+oldfile=/etc/adjtimex.conf
-+olderfile=/etc/rc.boot/adjtimex
-+#		 new starting script
-+startfile=/etc/init.d/adjtimex
-+#		 new configuration file
-+conffile=/etc/default/adjtimex
-+
-+create_adjtimex_conf()
-+{
-+
-+    TICK=10000
-+    FREQ=0
-+	
-+    if [ -f $oldfile ]; then
-+	TICK=`awk '
-+	BEGIN{tick=10000;}
-+	/[ \t]*TICK[ \t]*=[ \t]*"?[0-9]+"?/ {
-+	    sub(/[ \t]*TICK[ \t]*=[ \t]*"?/,"");
-+	    tick=$0+0;
-+	}
-+	END {print tick;}
-+	' $oldfile` 
-+
-+	FREQ=`awk '
-+	BEGIN{freq=0;}
-+	/[ \t]*FREQ[ \t]*=[ \t]*"?[0-9]+"?/ {
-+	    sub(/[ \t]*FREQ[ \t]*=[ \t]*"?/,"");
-+	    freq=$0+0;
-+	}
-+	END {print freq;}
-+	' $oldfile` 
-+
-+#	echo "parameters from $oldfile: TICK=$TICK FREQ=$FREQ";
-+    else 
-+	if [ -f $olderfile ]; then
-+	    TICK=`awk '
-+	    BEGIN{tick=10000;}
-+	    /[ \t]*TICK[ \t]*=[ \t]*"?[0-9]+"?/ {
-+		sub(/[ \t]*TICK[ \t]*=[ \t]*"?/,"");
-+	    tick=$0+0;
-+	}
-+	END {print tick;}
-+	' $olderfile` 
-+	    
-+	    FREQ=`awk '
-+	    BEGIN{freq=0;}
-+	    /[ \t]*FREQ[ \t]*=[ \t]*"?[0-9]+"?/ {
-+		sub(/[ \t]*FREQ[ \t]*=[ \t]*"?/,"");
-+		freq=$0+0;
-+	    }
-+	    END {print freq;}
-+	    ' $olderfile` 
-+
-+#	    echo "parameters from $olderfile: TICK=$TICK FREQ=$FREQ";
-+	fi
-+    fi
-+    
-+	if [ -f $conffile ]; then 
-+#	    echo "using existing $conffile";
-+	    true;
-+	else 
-+	    if [ -d /etc/default ]; then true; else mkdir /etc/default; fi
-+	    cat >$conffile <<EOF
-+#  $conffile - configuration file for adjtimex(8)
-+#
-+#  you may adjust these values manually or by calling /usr/sbin/adjtimexconfig
-+#
-+#  This file is sourced by $startfile
-+#
-+TICK=$TICK
-+FREQ=$FREQ
-+
-+EOF
-+	fi
-+
-+	rm -f $oldfile $olderfile
-+}
-+
-+
-+case "$1" in
-+    configure)
-+
-+	create_adjtimex_conf
-+
-+	db_get adjtimex/run_daemon
-+	if [ "$RET" = "true" ]; then
-+	    update-rc.d adjtimex start 20 S . >/dev/null
-+    
-+	    if which invoke-rc.d >/dev/null 2>&1; then
-+		invoke-rc.d adjtimex start
-+	    else
-+		/etc/init.d/adjtimex start
-+	    fi
-+	fi
-+
-+	db_get adjtimex/compare_rtc
-+	if [ "$RET" = "true" ]; then
-+	    /usr/sbin/adjtimexconfig
-+	fi
-+
-+	;;
-+    abort-upgrade|abort-remove|abort-deconfigure)
-+	exit 0
-+	;;
-+    *)
-+	echo "postinst called with unknown argument \`$1'" >&2
-+	exit 0
-+	;;
-+esac
-+
-+#DEBHELPER#
---- adjtimex-1.23.orig/debian/adjtimex.init
-+++ adjtimex-1.23/debian/adjtimex.init
-@@ -0,0 +1,45 @@
-+#!/bin/sh
-+#
-+# Run ADJTIMEX at startup.
-+
-+### BEGIN INIT INFO
-+# Provides:          adjtimex
-+# Required-Start:    
-+# Required-Stop:     
-+# Should-Start:      
-+# Should-Stop:       
-+# Default-Start:     2 3 4 5
-+# Default-Stop:      0 1 6
-+# Short-Description: set the kernel time variables
-+# Description:       set the kernel time variables
-+### END INIT INFO
-+
-+test -x /sbin/adjtimex  || exit 0
-+
-+# default values
-+TICK=10000
-+FREQ=0
-+ 
-+# values in $cfg take precedence over the values here
-+cfg=/etc/default/adjtimex
-+
-+if [ -f $cfg ]; then
-+  . $cfg
-+fi
-+
-+case "$1" in
-+  start|restart|force-reload)
-+    echo -n "Regulating system clock..."
-+    /sbin/adjtimex -tick "$TICK" -frequency "$FREQ"
-+    echo "done."
-+    ;;
-+  stop|status)
-+    ;;
-+  *)
-+    echo "/etc/init.d/adjtimex: unknown command $1" >&2
-+    echo "Usage: /etc/init.d/adjtimex {start|stop|restart|force-reload}" >&2
-+    exit 3
-+    ;;
-+esac
-+
-+exit 0
---- adjtimex-1.23.orig/debian/adjust
-+++ adjtimex-1.23/debian/adjust
-@@ -0,0 +1,15 @@
-+         mode: 16384
-+       offset: 0
-+    frequency: 0
-+     maxerror: 0
-+     esterror: 0
-+       status: 0
-+time_constant: 0
-+    precision: 0
-+    tolerance: 0
-+         tick: 0
-+     raw time:  0s 0us = 0.000000
-+for this kernel:
-+   USER_HZ = 100 (nominally 100 ticks per second)
-+   9000 <= tick <= 11000
-+   -33554432 <= frequency <= 33554432
---- adjtimex-1.23.orig/debian/compat
-+++ adjtimex-1.23/debian/compat
-@@ -0,0 +1 @@
-+5
---- adjtimex-1.23.orig/Makefile
-+++ adjtimex-1.23/Makefile
-@@ -0,0 +1,70 @@
-+# Generated automatically from Makefile.in by configure.
-+#### Start of system configuration section.             -*-makefile-*- ####
-+ srcdir = .
-+
-+VERSION=1.22
-+
-+CFLAGS = -g -O2 -Wall
-+prefix = /usr
-+man1dir=${prefix}/share/man/man1
-+exec_prefix = ${prefix}
-+bindir=/sbin
-+
-+INSTALL=/usr/bin/install -c
-+
-+# Extension (not including `.') for the manual page filenames.
-+manext = 8
-+# Where to put the manual pages.
-+mandir = $(prefix)/share/man/man$(manext)
-+
-+#### End of system configuration section. ####
-+
-+SHELL = /bin/sh
-+
-+SRC = adjtimex.c adjtimex.8 mat.c mat.h install-sh configure.in		\
-+ configure Makefile.in README README.ru adjtimex.lsm adjtimex.lsm.in	\
-+ COPYING COPYRIGHT ChangeLog
-+
-+all: adjtimex adjtimex.lsm
-+
-+adjtimex: adjtimex.c mat.o
-+	$(CC) $(CFLAGS) -I. -DVERSION=\"$(VERSION)\" -o adjtimex adjtimex.c  \
-+		mat.o -lm
-+
-+adjtimex.lsm: adjtimex.lsm.in Makefile.in
-+	sed -e 's/@VERSION@/$(VERSION)/'		\
-+	  -e "s/@DATE@/`date +%d%b%y|tr [a-z] [A-Z]`/"	\
-+	  adjtimex.lsm.in >adjtimex.lsm
-+
-+mat.o: mat.c
-+	$(CC) $(CFLAGS) -c mat.c
-+
-+install: all
-+	$(INSTALL) -g bin -m 755 -o root adjtimex $(bindir)/adjtimex
-+	$(INSTALL) -d -g root -m 755 -o root $(mandir)
-+	-$(INSTALL) -g root -m 644 -o root $(srcdir)/adjtimex.8 \
-+		$(mandir)/adjtimex.$(manext)
-+
-+uninstall:
-+	rm -f $(bindir)/adjtimex $(mandir)/adjtimex.$(manext)
-+
-+clean: 
-+	rm -f core *.o
-+veryclean: clean
-+	rm -f adjtimex
-+
-+shar: $(SRC)
-+	distname=adjtimex-$(VERSION);		\
-+	shar $(SRC) >$$distname.shar 
-+
-+dist: $(SRC)
-+	distname=adjtimex-$(VERSION);					      \
-+	rm -fr $$distname;						      \
-+	mkdir $$distname;						      \
-+	for file in $(SRC); do						      \
-+	  ln $$file $$distname/$$file					      \
-+	  || { echo copying $$file instead; cp -p $$file $$distname/$$file;}; \
-+	done;								      \
-+	chmod -R a+rX $$distname;					      \
-+	tar -chz -f $$distname.tar.gz $$distname;			      \
-+	rm -fr $$distname
diff --git a/source/a/util-linux/adjtimex_1.29-2.2.diff b/source/a/util-linux/adjtimex_1.29-2.2.diff
new file mode 100644
index 00000000..62ac1db3
--- /dev/null
+++ b/source/a/util-linux/adjtimex_1.29-2.2.diff
@@ -0,0 +1,6564 @@
+--- adjtimex-1.29.orig/adjtimex.lsm
++++ adjtimex-1.29/adjtimex.lsm
+@@ -1,7 +1,7 @@
+ Begin4
+ Title:		adjtimex - display or set the kernel time variables
+ Version:	1.29
+-Entered-date:	2010-04-16
++Entered-date:	2010-05-26
+ Description:	Display or set the kernel time variables.
+ This program gives you raw access to the kernel time variables.  For
+ a machine connected to the Internet, or equipped with a precision
+--- adjtimex-1.29.orig/config.h
++++ adjtimex-1.29/config.h
+@@ -0,0 +1,80 @@
++/* config.h.  Generated from config.h.in by configure.  */
++/* config.h.in.  Generated from configure.in by autoheader.  */
++
++/* Define to 1 if you have the `gettimeofday' function. */
++#define HAVE_GETTIMEOFDAY 1
++
++/* Define to 1 if you have the <inttypes.h> header file. */
++#define HAVE_INTTYPES_H 1
++
++/* Define to 1 if you have the <linux/rtc.h> header file. */
++#define HAVE_LINUX_RTC_H 1
++
++/* Define to 1 if you have the <memory.h> header file. */
++#define HAVE_MEMORY_H 1
++
++/* Define to 1 if you have the `mktime' function. */
++#define HAVE_MKTIME 1
++
++/* Define to 1 if you have the `putenv' function. */
++#define HAVE_PUTENV 1
++
++/* Define to 1 if you have the `select' function. */
++#define HAVE_SELECT 1
++
++/* Define to 1 if you have the <stdint.h> header file. */
++#define HAVE_STDINT_H 1
++
++/* Define to 1 if you have the <stdlib.h> header file. */
++#define HAVE_STDLIB_H 1
++
++/* Define to 1 if you have the <strings.h> header file. */
++#define HAVE_STRINGS_H 1
++
++/* Define to 1 if you have the <string.h> header file. */
++#define HAVE_STRING_H 1
++
++/* Define to 1 if you have the <sys/stat.h> header file. */
++#define HAVE_SYS_STAT_H 1
++
++/* Define to 1 if you have the <sys/time.h> header file. */
++#define HAVE_SYS_TIME_H 1
++
++/* Define to 1 if you have the <sys/types.h> header file. */
++#define HAVE_SYS_TYPES_H 1
++
++/* Define to 1 if you have the <unistd.h> header file. */
++#define HAVE_UNISTD_H 1
++
++/* Define to the address where bug reports for this package should be sent. */
++#define PACKAGE_BUGREPORT ""
++
++/* Define to the full name of this package. */
++#define PACKAGE_NAME ""
++
++/* Define to the full name and version of this package. */
++#define PACKAGE_STRING ""
++
++/* Define to the one symbol short name of this package. */
++#define PACKAGE_TARNAME ""
++
++/* Define to the version of this package. */
++#define PACKAGE_VERSION ""
++
++/* Define to 1 if you have the ANSI C header files. */
++#define STDC_HEADERS 1
++
++/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
++#define TIME_WITH_SYS_TIME 1
++
++/* Define to 1 if your <sys/time.h> declares `struct tm'. */
++/* #undef TM_IN_SYS_TIME */
++
++/* Define to empty if `const' does not conform to ANSI C. */
++/* #undef const */
++
++/* Define to `__inline__' or `__inline' if that's what the C compiler
++   calls it, or to nothing if 'inline' is not supported under any name.  */
++#ifndef __cplusplus
++/* #undef inline */
++#endif
+--- adjtimex-1.29.orig/config.sub
++++ adjtimex-1.29/config.sub
+@@ -0,0 +1,1760 @@
++#! /bin/sh
++# Configuration validation subroutine script.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++#   2011 Free Software Foundation, Inc.
++
++timestamp='2011-03-23'
++
++# This file is (in principle) common to ALL GNU software.
++# The presence of a machine in this file suggests that SOME GNU software
++# can handle that machine.  It does not imply ALL GNU software can.
++#
++# This file is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Please send patches to <config-patches@gnu.org>.  Submit a context
++# diff and a properly formatted GNU ChangeLog entry.
++#
++# Configuration subroutine to validate and canonicalize a configuration type.
++# Supply the specified configuration type as an argument.
++# If it is invalid, we print an error message on stderr and exit with code 1.
++# Otherwise, we print the canonical config type on stdout and succeed.
++
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++# This file is supposed to be the same for all GNU packages
++# and recognize all the CPU types, system types and aliases
++# that are meaningful with *any* GNU software.
++# Each package is responsible for reporting which valid configurations
++# it does not support.  The user should be able to distinguish
++# a failure to support a valid configuration from a meaningless
++# configuration.
++
++# The goal of this file is to map all the various variations of a given
++# machine specification into a single specification in the form:
++#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or in some cases, the newer four-part form:
++#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
++# It is wrong to echo any other type of specification.
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS
++       $0 [OPTION] ALIAS
++
++Canonicalize a configuration name.
++
++Operation modes:
++  -h, --help         print this help, then exit
++  -t, --time-stamp   print date of last modification, then exit
++  -v, --version      print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
++Software Foundation, Inc.
++
++This is free software; see the source for copying conditions.  There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++  case $1 in
++    --time-stamp | --time* | -t )
++       echo "$timestamp" ; exit ;;
++    --version | -v )
++       echo "$version" ; exit ;;
++    --help | --h* | -h )
++       echo "$usage"; exit ;;
++    -- )     # Stop option processing
++       shift; break ;;
++    - )	# Use stdin as input.
++       break ;;
++    -* )
++       echo "$me: invalid option $1$help"
++       exit 1 ;;
++
++    *local*)
++       # First pass through any local machine types.
++       echo $1
++       exit ;;
++
++    * )
++       break ;;
++  esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++    exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++    exit 1;;
++esac
++
++# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
++# Here we must recognize all the valid KERNEL-OS combinations.
++maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
++case $maybe_os in
++  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
++  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
++  knetbsd*-gnu* | netbsd*-gnu* | \
++  kopensolaris*-gnu* | \
++  storm-chaos* | os2-emx* | rtmk-nova*)
++    os=-$maybe_os
++    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
++    ;;
++  *)
++    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
++    if [ $basic_machine != $1 ]
++    then os=`echo $1 | sed 's/.*-/-/'`
++    else os=; fi
++    ;;
++esac
++
++### Let's recognize common machines as not being operating systems so
++### that things like config.sub decstation-3100 work.  We also
++### recognize some manufacturers as not being operating systems, so we
++### can provide default operating systems below.
++case $os in
++	-sun*os*)
++		# Prevent following clause from handling this invalid input.
++		;;
++	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
++	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
++	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
++	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
++	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
++	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
++	-apple | -axis | -knuth | -cray | -microblaze)
++		os=
++		basic_machine=$1
++		;;
++	-bluegene*)
++		os=-cnk
++		;;
++	-sim | -cisco | -oki | -wec | -winbond)
++		os=
++		basic_machine=$1
++		;;
++	-scout)
++		;;
++	-wrs)
++		os=-vxworks
++		basic_machine=$1
++		;;
++	-chorusos*)
++		os=-chorusos
++		basic_machine=$1
++		;;
++	-chorusrdb)
++		os=-chorusrdb
++		basic_machine=$1
++		;;
++	-hiux*)
++		os=-hiuxwe2
++		;;
++	-sco6)
++		os=-sco5v6
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco5)
++		os=-sco3.2v5
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco4)
++		os=-sco3.2v4
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco3.2.[4-9]*)
++		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco3.2v[4-9]*)
++		# Don't forget version if it is 3.2v4 or newer.
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco5v6*)
++		# Don't forget version if it is 3.2v4 or newer.
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-sco*)
++		os=-sco3.2v2
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-udk*)
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-isc)
++		os=-isc2.2
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-clix*)
++		basic_machine=clipper-intergraph
++		;;
++	-isc*)
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
++	-lynx*)
++		os=-lynxos
++		;;
++	-ptx*)
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
++		;;
++	-windowsnt*)
++		os=`echo $os | sed -e 's/windowsnt/winnt/'`
++		;;
++	-psos*)
++		os=-psos
++		;;
++	-mint | -mint[0-9]*)
++		basic_machine=m68k-atari
++		os=-mint
++		;;
++esac
++
++# Decode aliases for certain CPU-COMPANY combinations.
++case $basic_machine in
++	# Recognize the basic CPU types without company name.
++	# Some are omitted here because they have special meanings below.
++	1750a | 580 \
++	| a29k \
++	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++	| am33_2.0 \
++	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
++	| bfin \
++	| c4x | clipper \
++	| d10v | d30v | dlx | dsp16xx \
++	| fido | fr30 | frv \
++	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++	| i370 | i860 | i960 | ia64 \
++	| ip2k | iq2000 \
++	| lm32 \
++	| m32c | m32r | m32rle | m68000 | m68k | m88k \
++	| maxq | mb | microblaze | mcore | mep | metag \
++	| mips | mipsbe | mipseb | mipsel | mipsle \
++	| mips16 \
++	| mips64 | mips64el \
++	| mips64octeon | mips64octeonel \
++	| mips64orion | mips64orionel \
++	| mips64r5900 | mips64r5900el \
++	| mips64vr | mips64vrel \
++	| mips64vr4100 | mips64vr4100el \
++	| mips64vr4300 | mips64vr4300el \
++	| mips64vr5000 | mips64vr5000el \
++	| mips64vr5900 | mips64vr5900el \
++	| mipsisa32 | mipsisa32el \
++	| mipsisa32r2 | mipsisa32r2el \
++	| mipsisa64 | mipsisa64el \
++	| mipsisa64r2 | mipsisa64r2el \
++	| mipsisa64sb1 | mipsisa64sb1el \
++	| mipsisa64sr71k | mipsisa64sr71kel \
++	| mipstx39 | mipstx39el \
++	| mn10200 | mn10300 \
++	| moxie \
++	| mt \
++	| msp430 \
++	| nds32 | nds32le | nds32be \
++	| nios | nios2 \
++	| ns16k | ns32k \
++	| open8 \
++	| or32 \
++	| pdp10 | pdp11 | pj | pjl \
++	| powerpc | powerpc64 | powerpc64le | powerpcle \
++	| pyramid \
++	| rx \
++	| score \
++	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
++	| sh64 | sh64le \
++	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
++	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
++	| spu \
++	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
++	| ubicom32 \
++	| v850 | v850e \
++	| we32k \
++	| x86 | xc16x | xstormy16 | xtensa \
++	| z8k | z80)
++		basic_machine=$basic_machine-unknown
++		;;
++	c54x)
++		basic_machine=tic54x-unknown
++		;;
++	c55x)
++		basic_machine=tic55x-unknown
++		;;
++	c6x)
++		basic_machine=tic6x-unknown
++		;;
++	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
++		# Motorola 68HC11/12.
++		basic_machine=$basic_machine-unknown
++		os=-none
++		;;
++	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++		;;
++	ms1)
++		basic_machine=mt-unknown
++		;;
++
++	strongarm | thumb | xscale)
++		basic_machine=arm-unknown
++		;;
++
++	xscaleeb)
++		basic_machine=armeb-unknown
++		;;
++
++	xscaleel)
++		basic_machine=armel-unknown
++		;;
++
++	# We use `pc' rather than `unknown'
++	# because (1) that's what they normally are, and
++	# (2) the word "unknown" tends to confuse beginning users.
++	i*86 | x86_64)
++	  basic_machine=$basic_machine-pc
++	  ;;
++	# Object if more than one company name word.
++	*-*-*)
++		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++		exit 1
++		;;
++	# Recognize the basic CPU types with company name.
++	580-* \
++	| a29k-* \
++	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
++	| avr-* | avr32-* \
++	| bfin-* | bs2000-* \
++	| c[123]* | c30-* | [cjt]90-* | c4x-* \
++	| clipper-* | craynv-* | cydra-* \
++	| d10v-* | d30v-* | dlx-* \
++	| elxsi-* \
++	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
++	| h8300-* | h8500-* \
++	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++	| i*86-* | i860-* | i960-* | ia64-* \
++	| ip2k-* | iq2000-* \
++	| lm32-* \
++	| m32c-* | m32r-* | m32rle-* \
++	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
++	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++	| mips16-* \
++	| mips64-* | mips64el-* \
++	| mips64octeon-* | mips64octeonel-* \
++	| mips64orion-* | mips64orionel-* \
++	| mips64r5900-* | mips64r5900el-* \
++	| mips64vr-* | mips64vrel-* \
++	| mips64vr4100-* | mips64vr4100el-* \
++	| mips64vr4300-* | mips64vr4300el-* \
++	| mips64vr5000-* | mips64vr5000el-* \
++	| mips64vr5900-* | mips64vr5900el-* \
++	| mipsisa32-* | mipsisa32el-* \
++	| mipsisa32r2-* | mipsisa32r2el-* \
++	| mipsisa64-* | mipsisa64el-* \
++	| mipsisa64r2-* | mipsisa64r2el-* \
++	| mipsisa64sb1-* | mipsisa64sb1el-* \
++	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
++	| mipstx39-* | mipstx39el-* \
++	| mmix-* \
++	| mt-* \
++	| msp430-* \
++	| nds32-* | nds32le-* | nds32be-* \
++	| nios-* | nios2-* \
++	| none-* | np1-* | ns16k-* | ns32k-* \
++	| open8-* \
++	| orion-* \
++	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
++	| pyramid-* \
++	| romp-* | rs6000-* | rx-* \
++	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
++	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
++	| sparclite-* \
++	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
++	| tahoe-* \
++	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++	| tile-* | tilegx-* \
++	| tron-* \
++	| ubicom32-* \
++	| v850-* | v850e-* | vax-* \
++	| we32k-* \
++	| x86-* | x86_64-* | xc16x-* | xps100-* \
++	| xstormy16-* | xtensa*-* \
++	| ymp-* \
++	| z8k-* | z80-*)
++		;;
++	# Recognize the basic CPU types without company name, with glob match.
++	xtensa*)
++		basic_machine=$basic_machine-unknown
++		;;
++	# Recognize the various machine names and aliases which stand
++	# for a CPU type and a company and sometimes even an OS.
++	386bsd)
++		basic_machine=i386-unknown
++		os=-bsd
++		;;
++	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
++		basic_machine=m68000-att
++		;;
++	3b*)
++		basic_machine=we32k-att
++		;;
++	a29khif)
++		basic_machine=a29k-amd
++		os=-udi
++		;;
++	abacus)
++		basic_machine=abacus-unknown
++		;;
++	adobe68k)
++		basic_machine=m68010-adobe
++		os=-scout
++		;;
++	alliant | fx80)
++		basic_machine=fx80-alliant
++		;;
++	altos | altos3068)
++		basic_machine=m68k-altos
++		;;
++	am29k)
++		basic_machine=a29k-none
++		os=-bsd
++		;;
++	amd64)
++		basic_machine=x86_64-pc
++		;;
++	amd64-*)
++		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	amdahl)
++		basic_machine=580-amdahl
++		os=-sysv
++		;;
++	amiga | amiga-*)
++		basic_machine=m68k-unknown
++		;;
++	amigaos | amigados)
++		basic_machine=m68k-unknown
++		os=-amigaos
++		;;
++	amigaunix | amix)
++		basic_machine=m68k-unknown
++		os=-sysv4
++		;;
++	apollo68)
++		basic_machine=m68k-apollo
++		os=-sysv
++		;;
++	apollo68bsd)
++		basic_machine=m68k-apollo
++		os=-bsd
++		;;
++	aros)
++		basic_machine=i386-pc
++		os=-aros
++		;;
++	aux)
++		basic_machine=m68k-apple
++		os=-aux
++		;;
++	balance)
++		basic_machine=ns32k-sequent
++		os=-dynix
++		;;
++	blackfin)
++		basic_machine=bfin-unknown
++		os=-linux
++		;;
++	blackfin-*)
++		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
++		os=-linux
++		;;
++	bluegene*)
++		basic_machine=powerpc-ibm
++		os=-cnk
++		;;
++	c54x-*)
++		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	c55x-*)
++		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	c6x-*)
++		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	c90)
++		basic_machine=c90-cray
++		os=-unicos
++		;;
++	cegcc)
++		basic_machine=arm-unknown
++		os=-cegcc
++		;;
++	convex-c1)
++		basic_machine=c1-convex
++		os=-bsd
++		;;
++	convex-c2)
++		basic_machine=c2-convex
++		os=-bsd
++		;;
++	convex-c32)
++		basic_machine=c32-convex
++		os=-bsd
++		;;
++	convex-c34)
++		basic_machine=c34-convex
++		os=-bsd
++		;;
++	convex-c38)
++		basic_machine=c38-convex
++		os=-bsd
++		;;
++	cray | j90)
++		basic_machine=j90-cray
++		os=-unicos
++		;;
++	craynv)
++		basic_machine=craynv-cray
++		os=-unicosmp
++		;;
++	cr16 | cr16-*)
++		basic_machine=cr16-unknown
++		os=-elf
++		;;
++	crds | unos)
++		basic_machine=m68k-crds
++		;;
++	crisv32 | crisv32-* | etraxfs*)
++		basic_machine=crisv32-axis
++		;;
++	cris | cris-* | etrax*)
++		basic_machine=cris-axis
++		;;
++	crx)
++		basic_machine=crx-unknown
++		os=-elf
++		;;
++	da30 | da30-*)
++		basic_machine=m68k-da30
++		;;
++	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
++		basic_machine=mips-dec
++		;;
++	decsystem10* | dec10*)
++		basic_machine=pdp10-dec
++		os=-tops10
++		;;
++	decsystem20* | dec20*)
++		basic_machine=pdp10-dec
++		os=-tops20
++		;;
++	delta | 3300 | motorola-3300 | motorola-delta \
++	      | 3300-motorola | delta-motorola)
++		basic_machine=m68k-motorola
++		;;
++	delta88)
++		basic_machine=m88k-motorola
++		os=-sysv3
++		;;
++	dicos)
++		basic_machine=i686-pc
++		os=-dicos
++		;;
++	djgpp)
++		basic_machine=i586-pc
++		os=-msdosdjgpp
++		;;
++	dpx20 | dpx20-*)
++		basic_machine=rs6000-bull
++		os=-bosx
++		;;
++	dpx2* | dpx2*-bull)
++		basic_machine=m68k-bull
++		os=-sysv3
++		;;
++	ebmon29k)
++		basic_machine=a29k-amd
++		os=-ebmon
++		;;
++	elxsi)
++		basic_machine=elxsi-elxsi
++		os=-bsd
++		;;
++	encore | umax | mmax)
++		basic_machine=ns32k-encore
++		;;
++	es1800 | OSE68k | ose68k | ose | OSE)
++		basic_machine=m68k-ericsson
++		os=-ose
++		;;
++	fx2800)
++		basic_machine=i860-alliant
++		;;
++	genix)
++		basic_machine=ns32k-ns
++		;;
++	gmicro)
++		basic_machine=tron-gmicro
++		os=-sysv
++		;;
++	go32)
++		basic_machine=i386-pc
++		os=-go32
++		;;
++	h3050r* | hiux*)
++		basic_machine=hppa1.1-hitachi
++		os=-hiuxwe2
++		;;
++	h8300hms)
++		basic_machine=h8300-hitachi
++		os=-hms
++		;;
++	h8300xray)
++		basic_machine=h8300-hitachi
++		os=-xray
++		;;
++	h8500hms)
++		basic_machine=h8500-hitachi
++		os=-hms
++		;;
++	harris)
++		basic_machine=m88k-harris
++		os=-sysv3
++		;;
++	hp300-*)
++		basic_machine=m68k-hp
++		;;
++	hp300bsd)
++		basic_machine=m68k-hp
++		os=-bsd
++		;;
++	hp300hpux)
++		basic_machine=m68k-hp
++		os=-hpux
++		;;
++	hp3k9[0-9][0-9] | hp9[0-9][0-9])
++		basic_machine=hppa1.0-hp
++		;;
++	hp9k2[0-9][0-9] | hp9k31[0-9])
++		basic_machine=m68000-hp
++		;;
++	hp9k3[2-9][0-9])
++		basic_machine=m68k-hp
++		;;
++	hp9k6[0-9][0-9] | hp6[0-9][0-9])
++		basic_machine=hppa1.0-hp
++		;;
++	hp9k7[0-79][0-9] | hp7[0-79][0-9])
++		basic_machine=hppa1.1-hp
++		;;
++	hp9k78[0-9] | hp78[0-9])
++		# FIXME: really hppa2.0-hp
++		basic_machine=hppa1.1-hp
++		;;
++	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
++		# FIXME: really hppa2.0-hp
++		basic_machine=hppa1.1-hp
++		;;
++	hp9k8[0-9][13679] | hp8[0-9][13679])
++		basic_machine=hppa1.1-hp
++		;;
++	hp9k8[0-9][0-9] | hp8[0-9][0-9])
++		basic_machine=hppa1.0-hp
++		;;
++	hppa-next)
++		os=-nextstep3
++		;;
++	hppaosf)
++		basic_machine=hppa1.1-hp
++		os=-osf
++		;;
++	hppro)
++		basic_machine=hppa1.1-hp
++		os=-proelf
++		;;
++	i370-ibm* | ibm*)
++		basic_machine=i370-ibm
++		;;
++# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
++	i*86v32)
++		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++		os=-sysv32
++		;;
++	i*86v4*)
++		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++		os=-sysv4
++		;;
++	i*86v)
++		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++		os=-sysv
++		;;
++	i*86sol2)
++		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++		os=-solaris2
++		;;
++	i386mach)
++		basic_machine=i386-mach
++		os=-mach
++		;;
++	i386-vsta | vsta)
++		basic_machine=i386-unknown
++		os=-vsta
++		;;
++	iris | iris4d)
++		basic_machine=mips-sgi
++		case $os in
++		    -irix*)
++			;;
++		    *)
++			os=-irix4
++			;;
++		esac
++		;;
++	isi68 | isi)
++		basic_machine=m68k-isi
++		os=-sysv
++		;;
++	m68knommu)
++		basic_machine=m68k-unknown
++		os=-linux
++		;;
++	m68knommu-*)
++		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
++		os=-linux
++		;;
++	m88k-omron*)
++		basic_machine=m88k-omron
++		;;
++	magnum | m3230)
++		basic_machine=mips-mips
++		os=-sysv
++		;;
++	merlin)
++		basic_machine=ns32k-utek
++		os=-sysv
++		;;
++	microblaze)
++		basic_machine=microblaze-xilinx
++		;;
++	mingw32)
++		basic_machine=i386-pc
++		os=-mingw32
++		;;
++	mingw32ce)
++		basic_machine=arm-unknown
++		os=-mingw32ce
++		;;
++	miniframe)
++		basic_machine=m68000-convergent
++		;;
++	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
++		basic_machine=m68k-atari
++		os=-mint
++		;;
++	mips3*-*)
++		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
++		;;
++	mips3*)
++		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
++		;;
++	monitor)
++		basic_machine=m68k-rom68k
++		os=-coff
++		;;
++	morphos)
++		basic_machine=powerpc-unknown
++		os=-morphos
++		;;
++	msdos)
++		basic_machine=i386-pc
++		os=-msdos
++		;;
++	ms1-*)
++		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++		;;
++	mvs)
++		basic_machine=i370-ibm
++		os=-mvs
++		;;
++	ncr3000)
++		basic_machine=i486-ncr
++		os=-sysv4
++		;;
++	netbsd386)
++		basic_machine=i386-unknown
++		os=-netbsd
++		;;
++	netwinder)
++		basic_machine=armv4l-rebel
++		os=-linux
++		;;
++	news | news700 | news800 | news900)
++		basic_machine=m68k-sony
++		os=-newsos
++		;;
++	news1000)
++		basic_machine=m68030-sony
++		os=-newsos
++		;;
++	news-3600 | risc-news)
++		basic_machine=mips-sony
++		os=-newsos
++		;;
++	necv70)
++		basic_machine=v70-nec
++		os=-sysv
++		;;
++	next | m*-next )
++		basic_machine=m68k-next
++		case $os in
++		    -nextstep* )
++			;;
++		    -ns2*)
++		      os=-nextstep2
++			;;
++		    *)
++		      os=-nextstep3
++			;;
++		esac
++		;;
++	nh3000)
++		basic_machine=m68k-harris
++		os=-cxux
++		;;
++	nh[45]000)
++		basic_machine=m88k-harris
++		os=-cxux
++		;;
++	nindy960)
++		basic_machine=i960-intel
++		os=-nindy
++		;;
++	mon960)
++		basic_machine=i960-intel
++		os=-mon960
++		;;
++	nonstopux)
++		basic_machine=mips-compaq
++		os=-nonstopux
++		;;
++	np1)
++		basic_machine=np1-gould
++		;;
++	neo-tandem)
++		basic_machine=neo-tandem
++		;;
++	nse-tandem)
++		basic_machine=nse-tandem
++		;;
++	nsr-tandem)
++		basic_machine=nsr-tandem
++		;;
++	op50n-* | op60c-*)
++		basic_machine=hppa1.1-oki
++		os=-proelf
++		;;
++	openrisc | openrisc-*)
++		basic_machine=or32-unknown
++		;;
++	os400)
++		basic_machine=powerpc-ibm
++		os=-os400
++		;;
++	OSE68000 | ose68000)
++		basic_machine=m68000-ericsson
++		os=-ose
++		;;
++	os68k)
++		basic_machine=m68k-none
++		os=-os68k
++		;;
++	pa-hitachi)
++		basic_machine=hppa1.1-hitachi
++		os=-hiuxwe2
++		;;
++	paragon)
++		basic_machine=i860-intel
++		os=-osf
++		;;
++	parisc)
++		basic_machine=hppa-unknown
++		os=-linux
++		;;
++	parisc-*)
++		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
++		os=-linux
++		;;
++	pbd)
++		basic_machine=sparc-tti
++		;;
++	pbb)
++		basic_machine=m68k-tti
++		;;
++	pc532 | pc532-*)
++		basic_machine=ns32k-pc532
++		;;
++	pc98)
++		basic_machine=i386-pc
++		;;
++	pc98-*)
++		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pentium | p5 | k5 | k6 | nexgen | viac3)
++		basic_machine=i586-pc
++		;;
++	pentiumpro | p6 | 6x86 | athlon | athlon_*)
++		basic_machine=i686-pc
++		;;
++	pentiumii | pentium2 | pentiumiii | pentium3)
++		basic_machine=i686-pc
++		;;
++	pentium4)
++		basic_machine=i786-pc
++		;;
++	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
++		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pentiumpro-* | p6-* | 6x86-* | athlon-*)
++		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pentium4-*)
++		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pn)
++		basic_machine=pn-gould
++		;;
++	power)	basic_machine=power-ibm
++		;;
++	ppc | ppcbe)	basic_machine=powerpc-unknown
++		;;
++	ppc-* | ppcbe-*)
++		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	ppcle | powerpclittle | ppc-le | powerpc-little)
++		basic_machine=powerpcle-unknown
++		;;
++	ppcle-* | powerpclittle-*)
++		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	ppc64)	basic_machine=powerpc64-unknown
++		;;
++	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++		basic_machine=powerpc64le-unknown
++		;;
++	ppc64le-* | powerpc64little-*)
++		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	ps2)
++		basic_machine=i386-ibm
++		;;
++	pw32)
++		basic_machine=i586-unknown
++		os=-pw32
++		;;
++	rdos)
++		basic_machine=i386-pc
++		os=-rdos
++		;;
++	rom68k)
++		basic_machine=m68k-rom68k
++		os=-coff
++		;;
++	rm[46]00)
++		basic_machine=mips-siemens
++		;;
++	rtpc | rtpc-*)
++		basic_machine=romp-ibm
++		;;
++	s390 | s390-*)
++		basic_machine=s390-ibm
++		;;
++	s390x | s390x-*)
++		basic_machine=s390x-ibm
++		;;
++	sa29200)
++		basic_machine=a29k-amd
++		os=-udi
++		;;
++	sb1)
++		basic_machine=mipsisa64sb1-unknown
++		;;
++	sb1el)
++		basic_machine=mipsisa64sb1el-unknown
++		;;
++	sde)
++		basic_machine=mipsisa32-sde
++		os=-elf
++		;;
++	sei)
++		basic_machine=mips-sei
++		os=-seiux
++		;;
++	sequent)
++		basic_machine=i386-sequent
++		;;
++	sh)
++		basic_machine=sh-hitachi
++		os=-hms
++		;;
++	sh5el)
++		basic_machine=sh5le-unknown
++		;;
++	sh64)
++		basic_machine=sh64-unknown
++		;;
++	sparclite-wrs | simso-wrs)
++		basic_machine=sparclite-wrs
++		os=-vxworks
++		;;
++	sps7)
++		basic_machine=m68k-bull
++		os=-sysv2
++		;;
++	spur)
++		basic_machine=spur-unknown
++		;;
++	st2000)
++		basic_machine=m68k-tandem
++		;;
++	stratus)
++		basic_machine=i860-stratus
++		os=-sysv4
++		;;
++	strongarm-* | thumb-*)
++		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	sun2)
++		basic_machine=m68000-sun
++		;;
++	sun2os3)
++		basic_machine=m68000-sun
++		os=-sunos3
++		;;
++	sun2os4)
++		basic_machine=m68000-sun
++		os=-sunos4
++		;;
++	sun3os3)
++		basic_machine=m68k-sun
++		os=-sunos3
++		;;
++	sun3os4)
++		basic_machine=m68k-sun
++		os=-sunos4
++		;;
++	sun4os3)
++		basic_machine=sparc-sun
++		os=-sunos3
++		;;
++	sun4os4)
++		basic_machine=sparc-sun
++		os=-sunos4
++		;;
++	sun4sol2)
++		basic_machine=sparc-sun
++		os=-solaris2
++		;;
++	sun3 | sun3-*)
++		basic_machine=m68k-sun
++		;;
++	sun4)
++		basic_machine=sparc-sun
++		;;
++	sun386 | sun386i | roadrunner)
++		basic_machine=i386-sun
++		;;
++	sv1)
++		basic_machine=sv1-cray
++		os=-unicos
++		;;
++	symmetry)
++		basic_machine=i386-sequent
++		os=-dynix
++		;;
++	t3e)
++		basic_machine=alphaev5-cray
++		os=-unicos
++		;;
++	t90)
++		basic_machine=t90-cray
++		os=-unicos
++		;;
++	# This must be matched before tile*.
++	tilegx*)
++		basic_machine=tilegx-unknown
++		os=-linux-gnu
++		;;
++	tile*)
++		basic_machine=tile-unknown
++		os=-linux-gnu
++		;;
++	tx39)
++		basic_machine=mipstx39-unknown
++		;;
++	tx39el)
++		basic_machine=mipstx39el-unknown
++		;;
++	toad1)
++		basic_machine=pdp10-xkl
++		os=-tops20
++		;;
++	tower | tower-32)
++		basic_machine=m68k-ncr
++		;;
++	tpf)
++		basic_machine=s390x-ibm
++		os=-tpf
++		;;
++	udi29k)
++		basic_machine=a29k-amd
++		os=-udi
++		;;
++	ultra3)
++		basic_machine=a29k-nyu
++		os=-sym1
++		;;
++	v810 | necv810)
++		basic_machine=v810-nec
++		os=-none
++		;;
++	vaxv)
++		basic_machine=vax-dec
++		os=-sysv
++		;;
++	vms)
++		basic_machine=vax-dec
++		os=-vms
++		;;
++	vpp*|vx|vx-*)
++		basic_machine=f301-fujitsu
++		;;
++	vxworks960)
++		basic_machine=i960-wrs
++		os=-vxworks
++		;;
++	vxworks68)
++		basic_machine=m68k-wrs
++		os=-vxworks
++		;;
++	vxworks29k)
++		basic_machine=a29k-wrs
++		os=-vxworks
++		;;
++	w65*)
++		basic_machine=w65-wdc
++		os=-none
++		;;
++	w89k-*)
++		basic_machine=hppa1.1-winbond
++		os=-proelf
++		;;
++	xbox)
++		basic_machine=i686-pc
++		os=-mingw32
++		;;
++	xps | xps100)
++		basic_machine=xps100-honeywell
++		;;
++	xscale-* | xscalee[bl]-*)
++		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
++		;;
++	ymp)
++		basic_machine=ymp-cray
++		os=-unicos
++		;;
++	z8k-*-coff)
++		basic_machine=z8k-unknown
++		os=-sim
++		;;
++	z80-*-coff)
++		basic_machine=z80-unknown
++		os=-sim
++		;;
++	none)
++		basic_machine=none-none
++		os=-none
++		;;
++
++# Here we handle the default manufacturer of certain CPU types.  It is in
++# some cases the only manufacturer, in others, it is the most popular.
++	w89k)
++		basic_machine=hppa1.1-winbond
++		;;
++	op50n)
++		basic_machine=hppa1.1-oki
++		;;
++	op60c)
++		basic_machine=hppa1.1-oki
++		;;
++	romp)
++		basic_machine=romp-ibm
++		;;
++	mmix)
++		basic_machine=mmix-knuth
++		;;
++	rs6000)
++		basic_machine=rs6000-ibm
++		;;
++	vax)
++		basic_machine=vax-dec
++		;;
++	pdp10)
++		# there are many clones, so DEC is not a safe bet
++		basic_machine=pdp10-unknown
++		;;
++	pdp11)
++		basic_machine=pdp11-dec
++		;;
++	we32k)
++		basic_machine=we32k-att
++		;;
++	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
++		basic_machine=sh-unknown
++		;;
++	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
++		basic_machine=sparc-sun
++		;;
++	cydra)
++		basic_machine=cydra-cydrome
++		;;
++	orion)
++		basic_machine=orion-highlevel
++		;;
++	orion105)
++		basic_machine=clipper-highlevel
++		;;
++	mac | mpw | mac-mpw)
++		basic_machine=m68k-apple
++		;;
++	pmac | pmac-mpw)
++		basic_machine=powerpc-apple
++		;;
++	*-unknown)
++		# Make sure to match an already-canonicalized machine name.
++		;;
++	*)
++		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++		exit 1
++		;;
++esac
++
++# Here we canonicalize certain aliases for manufacturers.
++case $basic_machine in
++	*-digital*)
++		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
++		;;
++	*-commodore*)
++		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
++		;;
++	*)
++		;;
++esac
++
++# Decode manufacturer-specific aliases for certain operating systems.
++
++if [ x"$os" != x"" ]
++then
++case $os in
++	# First match some system type aliases
++	# that might get confused with valid system types.
++	# -solaris* is a basic system type, with this one exception.
++	-auroraux)
++		os=-auroraux
++		;;
++	-solaris1 | -solaris1.*)
++		os=`echo $os | sed -e 's|solaris1|sunos4|'`
++		;;
++	-solaris)
++		os=-solaris2
++		;;
++	-svr4*)
++		os=-sysv4
++		;;
++	-unixware*)
++		os=-sysv4.2uw
++		;;
++	-gnu/linux*)
++		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
++		;;
++	# First accept the basic system types.
++	# The portable systems comes first.
++	# Each alternative MUST END IN A *, to match a version number.
++	# -sysv* is not here because it comes later, after sysvr4.
++	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
++	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
++	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
++	      | -sym* | -kopensolaris* \
++	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
++	      | -aos* | -aros* \
++	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
++	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
++	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++	      | -openbsd* | -solidbsd* \
++	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
++	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++	      | -chorusos* | -chorusrdb* | -cegcc* \
++	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
++	      | -mingw32* | -linux-gnu* | -linux-android* \
++	      | -linux-newlib* | -linux-uclibc* \
++	      | -uxpv* | -beos* | -mpeix* | -udk* \
++	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
++	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
++	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
++	# Remember, each alternative MUST END IN *, to match a version number.
++		;;
++	-qnx*)
++		case $basic_machine in
++		    x86-* | i*86-*)
++			;;
++		    *)
++			os=-nto$os
++			;;
++		esac
++		;;
++	-nto-qnx*)
++		;;
++	-nto*)
++		os=`echo $os | sed -e 's|nto|nto-qnx|'`
++		;;
++	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
++	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
++	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
++		;;
++	-mac*)
++		os=`echo $os | sed -e 's|mac|macos|'`
++		;;
++	-linux-dietlibc)
++		os=-linux-dietlibc
++		;;
++	-linux*)
++		os=`echo $os | sed -e 's|linux|linux-gnu|'`
++		;;
++	-sunos5*)
++		os=`echo $os | sed -e 's|sunos5|solaris2|'`
++		;;
++	-sunos6*)
++		os=`echo $os | sed -e 's|sunos6|solaris3|'`
++		;;
++	-opened*)
++		os=-openedition
++		;;
++	-os400*)
++		os=-os400
++		;;
++	-wince*)
++		os=-wince
++		;;
++	-osfrose*)
++		os=-osfrose
++		;;
++	-osf*)
++		os=-osf
++		;;
++	-utek*)
++		os=-bsd
++		;;
++	-dynix*)
++		os=-bsd
++		;;
++	-acis*)
++		os=-aos
++		;;
++	-atheos*)
++		os=-atheos
++		;;
++	-syllable*)
++		os=-syllable
++		;;
++	-386bsd)
++		os=-bsd
++		;;
++	-ctix* | -uts*)
++		os=-sysv
++		;;
++	-nova*)
++		os=-rtmk-nova
++		;;
++	-ns2 )
++		os=-nextstep2
++		;;
++	-nsk*)
++		os=-nsk
++		;;
++	# Preserve the version number of sinix5.
++	-sinix5.*)
++		os=`echo $os | sed -e 's|sinix|sysv|'`
++		;;
++	-sinix*)
++		os=-sysv4
++		;;
++	-tpf*)
++		os=-tpf
++		;;
++	-triton*)
++		os=-sysv3
++		;;
++	-oss*)
++		os=-sysv3
++		;;
++	-svr4)
++		os=-sysv4
++		;;
++	-svr3)
++		os=-sysv3
++		;;
++	-sysvr4)
++		os=-sysv4
++		;;
++	# This must come after -sysvr4.
++	-sysv*)
++		;;
++	-ose*)
++		os=-ose
++		;;
++	-es1800*)
++		os=-ose
++		;;
++	-xenix)
++		os=-xenix
++		;;
++	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++		os=-mint
++		;;
++	-aros*)
++		os=-aros
++		;;
++	-kaos*)
++		os=-kaos
++		;;
++	-zvmoe)
++		os=-zvmoe
++		;;
++	-dicos*)
++		os=-dicos
++		;;
++	-nacl*)
++		;;
++	-none)
++		;;
++	*)
++		# Get rid of the `-' at the beginning of $os.
++		os=`echo $os | sed 's/[^-]*-//'`
++		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
++		exit 1
++		;;
++esac
++else
++
++# Here we handle the default operating systems that come with various machines.
++# The value should be what the vendor currently ships out the door with their
++# machine or put another way, the most popular os provided with the machine.
++
++# Note that if you're going to try to match "-MANUFACTURER" here (say,
++# "-sun"), then you have to tell the case statement up towards the top
++# that MANUFACTURER isn't an operating system.  Otherwise, code above
++# will signal an error saying that MANUFACTURER isn't an operating
++# system, and we'll never get to this point.
++
++case $basic_machine in
++	score-*)
++		os=-elf
++		;;
++	spu-*)
++		os=-elf
++		;;
++	*-acorn)
++		os=-riscix1.2
++		;;
++	arm*-rebel)
++		os=-linux
++		;;
++	arm*-semi)
++		os=-aout
++		;;
++	c4x-* | tic4x-*)
++		os=-coff
++		;;
++	tic54x-*)
++		os=-coff
++		;;
++	tic55x-*)
++		os=-coff
++		;;
++	tic6x-*)
++		os=-coff
++		;;
++	# This must come before the *-dec entry.
++	pdp10-*)
++		os=-tops20
++		;;
++	pdp11-*)
++		os=-none
++		;;
++	*-dec | vax-*)
++		os=-ultrix4.2
++		;;
++	m68*-apollo)
++		os=-domain
++		;;
++	i386-sun)
++		os=-sunos4.0.2
++		;;
++	m68000-sun)
++		os=-sunos3
++		# This also exists in the configure program, but was not the
++		# default.
++		# os=-sunos4
++		;;
++	m68*-cisco)
++		os=-aout
++		;;
++	mep-*)
++		os=-elf
++		;;
++	mips*-cisco)
++		os=-elf
++		;;
++	mips*-*)
++		os=-elf
++		;;
++	or32-*)
++		os=-coff
++		;;
++	*-tti)	# must be before sparc entry or we get the wrong os.
++		os=-sysv3
++		;;
++	sparc-* | *-sun)
++		os=-sunos4.1.1
++		;;
++	*-be)
++		os=-beos
++		;;
++	*-haiku)
++		os=-haiku
++		;;
++	*-ibm)
++		os=-aix
++		;;
++	*-knuth)
++		os=-mmixware
++		;;
++	*-wec)
++		os=-proelf
++		;;
++	*-winbond)
++		os=-proelf
++		;;
++	*-oki)
++		os=-proelf
++		;;
++	*-hp)
++		os=-hpux
++		;;
++	*-hitachi)
++		os=-hiux
++		;;
++	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
++		os=-sysv
++		;;
++	*-cbm)
++		os=-amigaos
++		;;
++	*-dg)
++		os=-dgux
++		;;
++	*-dolphin)
++		os=-sysv3
++		;;
++	m68k-ccur)
++		os=-rtu
++		;;
++	m88k-omron*)
++		os=-luna
++		;;
++	*-next )
++		os=-nextstep
++		;;
++	*-sequent)
++		os=-ptx
++		;;
++	*-crds)
++		os=-unos
++		;;
++	*-ns)
++		os=-genix
++		;;
++	i370-*)
++		os=-mvs
++		;;
++	*-next)
++		os=-nextstep3
++		;;
++	*-gould)
++		os=-sysv
++		;;
++	*-highlevel)
++		os=-bsd
++		;;
++	*-encore)
++		os=-bsd
++		;;
++	*-sgi)
++		os=-irix
++		;;
++	*-siemens)
++		os=-sysv4
++		;;
++	*-masscomp)
++		os=-rtu
++		;;
++	f30[01]-fujitsu | f700-fujitsu)
++		os=-uxpv
++		;;
++	*-rom68k)
++		os=-coff
++		;;
++	*-*bug)
++		os=-coff
++		;;
++	*-apple)
++		os=-macos
++		;;
++	*-atari*)
++		os=-mint
++		;;
++	*)
++		os=-none
++		;;
++esac
++fi
++
++# Here we handle the case where we know the os, and the CPU type, but not the
++# manufacturer.  We pick the logical manufacturer.
++vendor=unknown
++case $basic_machine in
++	*-unknown)
++		case $os in
++			-riscix*)
++				vendor=acorn
++				;;
++			-sunos*)
++				vendor=sun
++				;;
++			-cnk*|-aix*)
++				vendor=ibm
++				;;
++			-beos*)
++				vendor=be
++				;;
++			-hpux*)
++				vendor=hp
++				;;
++			-mpeix*)
++				vendor=hp
++				;;
++			-hiux*)
++				vendor=hitachi
++				;;
++			-unos*)
++				vendor=crds
++				;;
++			-dgux*)
++				vendor=dg
++				;;
++			-luna*)
++				vendor=omron
++				;;
++			-genix*)
++				vendor=ns
++				;;
++			-mvs* | -opened*)
++				vendor=ibm
++				;;
++			-os400*)
++				vendor=ibm
++				;;
++			-ptx*)
++				vendor=sequent
++				;;
++			-tpf*)
++				vendor=ibm
++				;;
++			-vxsim* | -vxworks* | -windiss*)
++				vendor=wrs
++				;;
++			-aux*)
++				vendor=apple
++				;;
++			-hms*)
++				vendor=hitachi
++				;;
++			-mpw* | -macos*)
++				vendor=apple
++				;;
++			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++				vendor=atari
++				;;
++			-vos*)
++				vendor=stratus
++				;;
++		esac
++		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
++		;;
++esac
++
++echo $basic_machine$os
++exit
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+--- adjtimex-1.29.orig/Makefile
++++ adjtimex-1.29/Makefile
+@@ -0,0 +1,78 @@
++#### Start of system configuration section.             -*-makefile-*- ####
++ srcdir = .
++VPATH = .
++
++VERSION=1.29
++
++CFLAGS = -Wall -g -O2 -Wall
++prefix = /usr
++man1dir=${prefix}/share/man/man1
++exec_prefix = ${prefix}
++bindir=/sbin
++datadir = ${datarootdir}
++datarootdir = ${prefix}/share
++
++INSTALL=/usr/bin/install -c
++
++
++# Extension (not including `.') for the manual page filenames.
++manext = 8
++# Where to put the manual pages.
++mandir = $(prefix)/share/man/man$(manext)
++
++#### End of system configuration section. ####
++
++SRC = adjtimex.c adjtimex.8 mat.c mat.h install-sh configure.in		\
++ configure Makefile.in config.h.in README README.ru adjtimex.lsm	\
++  adjtimex.lsm.in COPYING COPYRIGHT ChangeLog
++
++all: adjtimex adjtimex.lsm Makefile
++
++configure config.h.in: configure.in
++	autoconf
++	autoheader
++Makefile config.h: Makefile.in config.h.in
++	./configure
++
++adjtimex: adjtimex.c mat.o config.h Makefile
++	$(CC) $(CFLAGS) -I. -DVERSION=\"$(VERSION)\" -o adjtimex  \
++		 adjtimex.c mat.o -lm
++
++mat.o: mat.c
++	$(CC) $(CFLAGS) -c mat.c
++
++install: all
++	$(INSTALL) -g bin -m 755 -o root adjtimex $(bindir)/adjtimex
++	$(INSTALL) -d -g root -m 755 -o root $(mandir)
++	-$(INSTALL) -g root -m 644 -o root $(srcdir)/adjtimex.8 \
++		$(mandir)/adjtimex.$(manext)
++
++uninstall:
++	rm -f $(bindir)/adjtimex $(mandir)/adjtimex.$(manext)
++
++clean: 
++	rm -f core *.o
++veryclean: clean
++	rm -f adjtimex
++
++adjtimex.lsm: adjtimex.lsm.in Makefile
++	sed -e 's/@VERSION@/$(VERSION)/'	\
++	  -e "s/@DATE@/`date +%Y-%m-%d`/"	\
++	  adjtimex.lsm.in >adjtimex.lsm
++
++shar: $(SRC)
++	distname=adjtimex-$(VERSION);		\
++	shar $(SRC) >$$distname.shar 
++
++dist: $(SRC)
++	distname=adjtimex-$(VERSION);					      \
++	rm -fr $$distname;						      \
++	mkdir $$distname;						      \
++	for file in $(SRC); do						      \
++	  ln $$file $$distname/$$file					      \
++	  || { echo copying $$file instead; cp -p $$file $$distname/$$file;}; \
++	done;								      \
++	chmod -R a+rX $$distname;					      \
++	tar -chz -f $$distname.tar.gz $$distname;			      \
++	rm -fr $$distname
++
+--- adjtimex-1.29.orig/config.guess
++++ adjtimex-1.29/config.guess
+@@ -0,0 +1,1517 @@
++#! /bin/sh
++# Attempt to guess a canonical system name.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++#   2011 Free Software Foundation, Inc.
++
++timestamp='2011-05-11'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Originally written by Per Bothner.  Please send patches (context
++# diff format) to <config-patches@gnu.org> and include a ChangeLog
++# entry.
++#
++# This script attempts to guess a canonical system name similar to
++# config.sub.  If it succeeds, it prints the system name on stdout, and
++# exits with 0.  Otherwise, it exits with 1.
++#
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++  -h, --help         print this help, then exit
++  -t, --time-stamp   print date of last modification, then exit
++  -v, --version      print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
++Software Foundation, Inc.
++
++This is free software; see the source for copying conditions.  There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++  case $1 in
++    --time-stamp | --time* | -t )
++       echo "$timestamp" ; exit ;;
++    --version | -v )
++       echo "$version" ; exit ;;
++    --help | --h* | -h )
++       echo "$usage"; exit ;;
++    -- )     # Stop option processing
++       shift; break ;;
++    - )	# Use stdin as input.
++       break ;;
++    -* )
++       echo "$me: invalid option $1$help" >&2
++       exit 1 ;;
++    * )
++       break ;;
++  esac
++done
++
++if test $# != 0; then
++  echo "$me: too many arguments$help" >&2
++  exit 1
++fi
++
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,)    echo "int x;" > $dummy.c ;
++	for c in cc gcc c89 c99 ; do
++	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++	     CC_FOR_BUILD="$c"; break ;
++	  fi ;
++	done ;
++	if test x"$CC_FOR_BUILD" = x ; then
++	  CC_FOR_BUILD=no_compiler_found ;
++	fi
++	;;
++ ,,*)   CC_FOR_BUILD=$CC ;;
++ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
++esac ; set_cc_for_build= ;'
++
++# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
++# (ghazi@noc.rutgers.edu 1994-08-24)
++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++	PATH=$PATH:/.attbin ; export PATH
++fi
++
++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
++
++# Note: order is significant - the case branches are not exclusive.
++
++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++    *:NetBSD:*:*)
++	# NetBSD (nbsd) targets should (where applicable) match one or
++	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
++	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
++	# switched to ELF, *-*-netbsd* would select the old
++	# object file format.  This provides both forward
++	# compatibility and a consistent mechanism for selecting the
++	# object file format.
++	#
++	# Note: NetBSD doesn't particularly care about the vendor
++	# portion of the name.  We always set it to "unknown".
++	sysctl="sysctl -n hw.machine_arch"
++	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++	case "${UNAME_MACHINE_ARCH}" in
++	    armeb) machine=armeb-unknown ;;
++	    arm*) machine=arm-unknown ;;
++	    sh3el) machine=shl-unknown ;;
++	    sh3eb) machine=sh-unknown ;;
++	    sh5el) machine=sh5le-unknown ;;
++	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++	esac
++	# The Operating System including object format, if it has switched
++	# to ELF recently, or will in the future.
++	case "${UNAME_MACHINE_ARCH}" in
++	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++		eval $set_cc_for_build
++		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++			| grep -q __ELF__
++		then
++		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++		    # Return netbsd for either.  FIX?
++		    os=netbsd
++		else
++		    os=netbsdelf
++		fi
++		;;
++	    *)
++		os=netbsd
++		;;
++	esac
++	# The OS release
++	# Debian GNU/NetBSD machines have a different userland, and
++	# thus, need a distinct triplet. However, they do not need
++	# kernel version information, so it can be replaced with a
++	# suitable tag, in the style of linux-gnu.
++	case "${UNAME_VERSION}" in
++	    Debian*)
++		release='-gnu'
++		;;
++	    *)
++		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++		;;
++	esac
++	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++	# contains redundant information, the shorter form:
++	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++	echo "${machine}-${os}${release}"
++	exit ;;
++    *:OpenBSD:*:*)
++	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++	exit ;;
++    *:ekkoBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++	exit ;;
++    *:SolidBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++	exit ;;
++    macppc:MirBSD:*:*)
++	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
++	exit ;;
++    *:MirBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++	exit ;;
++    alpha:OSF1:*:*)
++	case $UNAME_RELEASE in
++	*4.0)
++		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++		;;
++	*5.*)
++		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++		;;
++	esac
++	# According to Compaq, /usr/sbin/psrinfo has been available on
++	# OSF/1 and Tru64 systems produced since 1995.  I hope that
++	# covers most systems running today.  This code pipes the CPU
++	# types through head -n 1, so we only detect the type of CPU 0.
++	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++	case "$ALPHA_CPU_TYPE" in
++	    "EV4 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV4.5 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "LCA4 (21066/21068)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV5 (21164)")
++		UNAME_MACHINE="alphaev5" ;;
++	    "EV5.6 (21164A)")
++		UNAME_MACHINE="alphaev56" ;;
++	    "EV5.6 (21164PC)")
++		UNAME_MACHINE="alphapca56" ;;
++	    "EV5.7 (21164PC)")
++		UNAME_MACHINE="alphapca57" ;;
++	    "EV6 (21264)")
++		UNAME_MACHINE="alphaev6" ;;
++	    "EV6.7 (21264A)")
++		UNAME_MACHINE="alphaev67" ;;
++	    "EV6.8CB (21264C)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8AL (21264B)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8CX (21264D)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.9A (21264/EV69A)")
++		UNAME_MACHINE="alphaev69" ;;
++	    "EV7 (21364)")
++		UNAME_MACHINE="alphaev7" ;;
++	    "EV7.9 (21364A)")
++		UNAME_MACHINE="alphaev79" ;;
++	esac
++	# A Pn.n version is a patched version.
++	# A Vn.n version is a released version.
++	# A Tn.n version is a released field test version.
++	# A Xn.n version is an unreleased experimental baselevel.
++	# 1.2 uses "1.2" for uname -r.
++	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
++	exitcode=$?
++	trap '' 0
++	exit $exitcode ;;
++    Alpha\ *:Windows_NT*:*)
++	# How do we know it's Interix rather than the generic POSIX subsystem?
++	# Should we change UNAME_MACHINE based on the output of uname instead
++	# of the specific Alpha model?
++	echo alpha-pc-interix
++	exit ;;
++    21064:Windows_NT:50:3)
++	echo alpha-dec-winnt3.5
++	exit ;;
++    Amiga*:UNIX_System_V:4.0:*)
++	echo m68k-unknown-sysv4
++	exit ;;
++    *:[Aa]miga[Oo][Ss]:*:*)
++	echo ${UNAME_MACHINE}-unknown-amigaos
++	exit ;;
++    *:[Mm]orph[Oo][Ss]:*:*)
++	echo ${UNAME_MACHINE}-unknown-morphos
++	exit ;;
++    *:OS/390:*:*)
++	echo i370-ibm-openedition
++	exit ;;
++    *:z/VM:*:*)
++	echo s390-ibm-zvmoe
++	exit ;;
++    *:OS400:*:*)
++	echo powerpc-ibm-os400
++	exit ;;
++    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
++	echo arm-acorn-riscix${UNAME_RELEASE}
++	exit ;;
++    arm:riscos:*:*|arm:RISCOS:*:*)
++	echo arm-unknown-riscos
++	exit ;;
++    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++	echo hppa1.1-hitachi-hiuxmpp
++	exit ;;
++    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
++	if test "`(/bin/universe) 2>/dev/null`" = att ; then
++		echo pyramid-pyramid-sysv3
++	else
++		echo pyramid-pyramid-bsd
++	fi
++	exit ;;
++    NILE*:*:*:dcosx)
++	echo pyramid-pyramid-svr4
++	exit ;;
++    DRS?6000:unix:4.0:6*)
++	echo sparc-icl-nx6
++	exit ;;
++    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++	case `/usr/bin/uname -p` in
++	    sparc) echo sparc-icl-nx7; exit ;;
++	esac ;;
++    s390x:SunOS:*:*)
++	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    sun4H:SunOS:5.*:*)
++	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
++	echo i386-pc-auroraux${UNAME_RELEASE}
++	exit ;;
++    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
++	eval $set_cc_for_build
++	SUN_ARCH="i386"
++	# If there is a compiler, see if it is configured for 64-bit objects.
++	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
++	# This test works for both compilers.
++	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
++		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++		grep IS_64BIT_ARCH >/dev/null
++	    then
++		SUN_ARCH="x86_64"
++	    fi
++	fi
++	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    sun4*:SunOS:6*:*)
++	# According to config.sub, this is the proper way to canonicalize
++	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
++	# it's likely to be more like Solaris than SunOS4.
++	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    sun4*:SunOS:*:*)
++	case "`/usr/bin/arch -k`" in
++	    Series*|S4*)
++		UNAME_RELEASE=`uname -v`
++		;;
++	esac
++	# Japanese Language versions have a version number like `4.1.3-JL'.
++	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
++	exit ;;
++    sun3*:SunOS:*:*)
++	echo m68k-sun-sunos${UNAME_RELEASE}
++	exit ;;
++    sun*:*:4.2BSD:*)
++	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
++	case "`/bin/arch`" in
++	    sun3)
++		echo m68k-sun-sunos${UNAME_RELEASE}
++		;;
++	    sun4)
++		echo sparc-sun-sunos${UNAME_RELEASE}
++		;;
++	esac
++	exit ;;
++    aushp:SunOS:*:*)
++	echo sparc-auspex-sunos${UNAME_RELEASE}
++	exit ;;
++    # The situation for MiNT is a little confusing.  The machine name
++    # can be virtually everything (everything which is not
++    # "atarist" or "atariste" at least should have a processor
++    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
++    # to the lowercase version "mint" (or "freemint").  Finally
++    # the system name "TOS" denotes a system which is actually not
++    # MiNT.  But MiNT is downward compatible to TOS, so this should
++    # be no problem.
++    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++	echo m68k-atari-mint${UNAME_RELEASE}
++	exit ;;
++    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++	echo m68k-atari-mint${UNAME_RELEASE}
++	exit ;;
++    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++	echo m68k-atari-mint${UNAME_RELEASE}
++	exit ;;
++    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++	echo m68k-milan-mint${UNAME_RELEASE}
++	exit ;;
++    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++	echo m68k-hades-mint${UNAME_RELEASE}
++	exit ;;
++    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++	echo m68k-unknown-mint${UNAME_RELEASE}
++	exit ;;
++    m68k:machten:*:*)
++	echo m68k-apple-machten${UNAME_RELEASE}
++	exit ;;
++    powerpc:machten:*:*)
++	echo powerpc-apple-machten${UNAME_RELEASE}
++	exit ;;
++    RISC*:Mach:*:*)
++	echo mips-dec-mach_bsd4.3
++	exit ;;
++    RISC*:ULTRIX:*:*)
++	echo mips-dec-ultrix${UNAME_RELEASE}
++	exit ;;
++    VAX*:ULTRIX*:*:*)
++	echo vax-dec-ultrix${UNAME_RELEASE}
++	exit ;;
++    2020:CLIX:*:* | 2430:CLIX:*:*)
++	echo clipper-intergraph-clix${UNAME_RELEASE}
++	exit ;;
++    mips:*:*:UMIPS | mips:*:*:RISCos)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++#ifdef __cplusplus
++#include <stdio.h>  /* for printf() prototype */
++	int main (int argc, char *argv[]) {
++#else
++	int main (argc, argv) int argc; char *argv[]; {
++#endif
++	#if defined (host_mips) && defined (MIPSEB)
++	#if defined (SYSTYPE_SYSV)
++	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
++	#endif
++	#if defined (SYSTYPE_SVR4)
++	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
++	#endif
++	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
++	#endif
++	#endif
++	  exit (-1);
++	}
++EOF
++	$CC_FOR_BUILD -o $dummy $dummy.c &&
++	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++	  SYSTEM_NAME=`$dummy $dummyarg` &&
++	    { echo "$SYSTEM_NAME"; exit; }
++	echo mips-mips-riscos${UNAME_RELEASE}
++	exit ;;
++    Motorola:PowerMAX_OS:*:*)
++	echo powerpc-motorola-powermax
++	exit ;;
++    Motorola:*:4.3:PL8-*)
++	echo powerpc-harris-powermax
++	exit ;;
++    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++	echo powerpc-harris-powermax
++	exit ;;
++    Night_Hawk:Power_UNIX:*:*)
++	echo powerpc-harris-powerunix
++	exit ;;
++    m88k:CX/UX:7*:*)
++	echo m88k-harris-cxux7
++	exit ;;
++    m88k:*:4*:R4*)
++	echo m88k-motorola-sysv4
++	exit ;;
++    m88k:*:3*:R3*)
++	echo m88k-motorola-sysv3
++	exit ;;
++    AViiON:dgux:*:*)
++	# DG/UX returns AViiON for all architectures
++	UNAME_PROCESSOR=`/usr/bin/uname -p`
++	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
++	then
++	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
++	       [ ${TARGET_BINARY_INTERFACE}x = x ]
++	    then
++		echo m88k-dg-dgux${UNAME_RELEASE}
++	    else
++		echo m88k-dg-dguxbcs${UNAME_RELEASE}
++	    fi
++	else
++	    echo i586-dg-dgux${UNAME_RELEASE}
++	fi
++	exit ;;
++    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
++	echo m88k-dolphin-sysv3
++	exit ;;
++    M88*:*:R3*:*)
++	# Delta 88k system running SVR3
++	echo m88k-motorola-sysv3
++	exit ;;
++    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
++	echo m88k-tektronix-sysv3
++	exit ;;
++    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
++	echo m68k-tektronix-bsd
++	exit ;;
++    *:IRIX*:*:*)
++	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
++	exit ;;
++    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
++	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
++    i*86:AIX:*:*)
++	echo i386-ibm-aix
++	exit ;;
++    ia64:AIX:*:*)
++	if [ -x /usr/bin/oslevel ] ; then
++		IBM_REV=`/usr/bin/oslevel`
++	else
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++	fi
++	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++	exit ;;
++    *:AIX:2:3)
++	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++		eval $set_cc_for_build
++		sed 's/^		//' << EOF >$dummy.c
++		#include <sys/systemcfg.h>
++
++		main()
++			{
++			if (!__power_pc())
++				exit(1);
++			puts("powerpc-ibm-aix3.2.5");
++			exit(0);
++			}
++EOF
++		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++		then
++			echo "$SYSTEM_NAME"
++		else
++			echo rs6000-ibm-aix3.2.5
++		fi
++	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
++		echo rs6000-ibm-aix3.2.4
++	else
++		echo rs6000-ibm-aix3.2
++	fi
++	exit ;;
++    *:AIX:*:[4567])
++	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
++		IBM_ARCH=rs6000
++	else
++		IBM_ARCH=powerpc
++	fi
++	if [ -x /usr/bin/oslevel ] ; then
++		IBM_REV=`/usr/bin/oslevel`
++	else
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++	fi
++	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
++	exit ;;
++    *:AIX:*:*)
++	echo rs6000-ibm-aix
++	exit ;;
++    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++	echo romp-ibm-bsd4.4
++	exit ;;
++    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
++	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
++	exit ;;                             # report: romp-ibm BSD 4.3
++    *:BOSX:*:*)
++	echo rs6000-bull-bosx
++	exit ;;
++    DPX/2?00:B.O.S.:*:*)
++	echo m68k-bull-sysv3
++	exit ;;
++    9000/[34]??:4.3bsd:1.*:*)
++	echo m68k-hp-bsd
++	exit ;;
++    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
++	echo m68k-hp-bsd4.4
++	exit ;;
++    9000/[34678]??:HP-UX:*:*)
++	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++	case "${UNAME_MACHINE}" in
++	    9000/31? )            HP_ARCH=m68000 ;;
++	    9000/[34]?? )         HP_ARCH=m68k ;;
++	    9000/[678][0-9][0-9])
++		if [ -x /usr/bin/getconf ]; then
++		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++		    case "${sc_cpu_version}" in
++		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++		      532)                      # CPU_PA_RISC2_0
++			case "${sc_kernel_bits}" in
++			  32) HP_ARCH="hppa2.0n" ;;
++			  64) HP_ARCH="hppa2.0w" ;;
++			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
++			esac ;;
++		    esac
++		fi
++		if [ "${HP_ARCH}" = "" ]; then
++		    eval $set_cc_for_build
++		    sed 's/^		//' << EOF >$dummy.c
++
++		#define _HPUX_SOURCE
++		#include <stdlib.h>
++		#include <unistd.h>
++
++		int main ()
++		{
++		#if defined(_SC_KERNEL_BITS)
++		    long bits = sysconf(_SC_KERNEL_BITS);
++		#endif
++		    long cpu  = sysconf (_SC_CPU_VERSION);
++
++		    switch (cpu)
++			{
++			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++			case CPU_PA_RISC2_0:
++		#if defined(_SC_KERNEL_BITS)
++			    switch (bits)
++				{
++				case 64: puts ("hppa2.0w"); break;
++				case 32: puts ("hppa2.0n"); break;
++				default: puts ("hppa2.0"); break;
++				} break;
++		#else  /* !defined(_SC_KERNEL_BITS) */
++			    puts ("hppa2.0"); break;
++		#endif
++			default: puts ("hppa1.0"); break;
++			}
++		    exit (0);
++		}
++EOF
++		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++		    test -z "$HP_ARCH" && HP_ARCH=hppa
++		fi ;;
++	esac
++	if [ ${HP_ARCH} = "hppa2.0w" ]
++	then
++	    eval $set_cc_for_build
++
++	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
++	    # generating 64-bit code.  GNU and HP use different nomenclature:
++	    #
++	    # $ CC_FOR_BUILD=cc ./config.guess
++	    # => hppa2.0w-hp-hpux11.23
++	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++	    # => hppa64-hp-hpux11.23
++
++	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++		grep -q __LP64__
++	    then
++		HP_ARCH="hppa2.0w"
++	    else
++		HP_ARCH="hppa64"
++	    fi
++	fi
++	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
++	exit ;;
++    ia64:HP-UX:*:*)
++	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++	echo ia64-hp-hpux${HPUX_REV}
++	exit ;;
++    3050*:HI-UX:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#include <unistd.h>
++	int
++	main ()
++	{
++	  long cpu = sysconf (_SC_CPU_VERSION);
++	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
++	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
++	     results, however.  */
++	  if (CPU_IS_PA_RISC (cpu))
++	    {
++	      switch (cpu)
++		{
++		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
++		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
++		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
++		  default: puts ("hppa-hitachi-hiuxwe2"); break;
++		}
++	    }
++	  else if (CPU_IS_HP_MC68K (cpu))
++	    puts ("m68k-hitachi-hiuxwe2");
++	  else puts ("unknown-hitachi-hiuxwe2");
++	  exit (0);
++	}
++EOF
++	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++		{ echo "$SYSTEM_NAME"; exit; }
++	echo unknown-hitachi-hiuxwe2
++	exit ;;
++    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++	echo hppa1.1-hp-bsd
++	exit ;;
++    9000/8??:4.3bsd:*:*)
++	echo hppa1.0-hp-bsd
++	exit ;;
++    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++	echo hppa1.0-hp-mpeix
++	exit ;;
++    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++	echo hppa1.1-hp-osf
++	exit ;;
++    hp8??:OSF1:*:*)
++	echo hppa1.0-hp-osf
++	exit ;;
++    i*86:OSF1:*:*)
++	if [ -x /usr/sbin/sysversion ] ; then
++	    echo ${UNAME_MACHINE}-unknown-osf1mk
++	else
++	    echo ${UNAME_MACHINE}-unknown-osf1
++	fi
++	exit ;;
++    parisc*:Lites*:*:*)
++	echo hppa1.1-hp-lites
++	exit ;;
++    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
++	echo c1-convex-bsd
++	exit ;;
++    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
++	if getsysinfo -f scalar_acc
++	then echo c32-convex-bsd
++	else echo c2-convex-bsd
++	fi
++	exit ;;
++    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
++	echo c34-convex-bsd
++	exit ;;
++    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
++	echo c38-convex-bsd
++	exit ;;
++    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
++	echo c4-convex-bsd
++	exit ;;
++    CRAY*Y-MP:*:*:*)
++	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
++    CRAY*[A-Z]90:*:*:*)
++	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
++	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++	      -e 's/\.[^.]*$/.X/'
++	exit ;;
++    CRAY*TS:*:*:*)
++	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
++    CRAY*T3E:*:*:*)
++	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
++    CRAY*SV1:*:*:*)
++	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
++    *:UNICOS/mp:*:*)
++	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
++    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
++	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++	exit ;;
++    5000:UNIX_System_V:4.*:*)
++	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++	exit ;;
++    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
++	exit ;;
++    sparc*:BSD/OS:*:*)
++	echo sparc-unknown-bsdi${UNAME_RELEASE}
++	exit ;;
++    *:BSD/OS:*:*)
++	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
++	exit ;;
++    *:FreeBSD:*:*)
++	case ${UNAME_MACHINE} in
++	    pc98)
++		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++	    amd64)
++		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++	    *)
++		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++	esac
++	exit ;;
++    i*:CYGWIN*:*)
++	echo ${UNAME_MACHINE}-pc-cygwin
++	exit ;;
++    *:MINGW*:*)
++	echo ${UNAME_MACHINE}-pc-mingw32
++	exit ;;
++    i*:windows32*:*)
++	# uname -m includes "-pc" on this system.
++	echo ${UNAME_MACHINE}-mingw32
++	exit ;;
++    i*:PW*:*)
++	echo ${UNAME_MACHINE}-pc-pw32
++	exit ;;
++    *:Interix*:*)
++	case ${UNAME_MACHINE} in
++	    x86)
++		echo i586-pc-interix${UNAME_RELEASE}
++		exit ;;
++	    authenticamd | genuineintel | EM64T)
++		echo x86_64-unknown-interix${UNAME_RELEASE}
++		exit ;;
++	    IA64)
++		echo ia64-unknown-interix${UNAME_RELEASE}
++		exit ;;
++	esac ;;
++    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++	echo i${UNAME_MACHINE}-pc-mks
++	exit ;;
++    8664:Windows_NT:*)
++	echo x86_64-pc-mks
++	exit ;;
++    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
++	# How do we know it's Interix rather than the generic POSIX subsystem?
++	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
++	# UNAME_MACHINE based on the output of uname instead of i386?
++	echo i586-pc-interix
++	exit ;;
++    i*:UWIN*:*)
++	echo ${UNAME_MACHINE}-pc-uwin
++	exit ;;
++    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++	echo x86_64-unknown-cygwin
++	exit ;;
++    p*:CYGWIN*:*)
++	echo powerpcle-unknown-cygwin
++	exit ;;
++    prep*:SunOS:5.*:*)
++	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit ;;
++    *:GNU:*:*)
++	# the GNU system
++	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++	exit ;;
++    *:GNU/*:*:*)
++	# other systems with GNU libc and userland
++	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++	exit ;;
++    i*86:Minix:*:*)
++	echo ${UNAME_MACHINE}-pc-minix
++	exit ;;
++    alpha:Linux:*:*)
++	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++	  EV5)   UNAME_MACHINE=alphaev5 ;;
++	  EV56)  UNAME_MACHINE=alphaev56 ;;
++	  PCA56) UNAME_MACHINE=alphapca56 ;;
++	  PCA57) UNAME_MACHINE=alphapca56 ;;
++	  EV6)   UNAME_MACHINE=alphaev6 ;;
++	  EV67)  UNAME_MACHINE=alphaev67 ;;
++	  EV68*) UNAME_MACHINE=alphaev68 ;;
++	esac
++	objdump --private-headers /bin/sh | grep -q ld.so.1
++	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++	exit ;;
++    arm*:Linux:*:*)
++	eval $set_cc_for_build
++	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++	    | grep -q __ARM_EABI__
++	then
++	    echo ${UNAME_MACHINE}-unknown-linux-gnu
++	else
++	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
++		| grep -q __ARM_PCS_VFP
++	    then
++		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++	    else
++		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
++	    fi
++	fi
++	exit ;;
++    avr32*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    cris:Linux:*:*)
++	echo cris-axis-linux-gnu
++	exit ;;
++    crisv32:Linux:*:*)
++	echo crisv32-axis-linux-gnu
++	exit ;;
++    frv:Linux:*:*)
++	echo frv-unknown-linux-gnu
++	exit ;;
++    i*86:Linux:*:*)
++	LIBC=gnu
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#ifdef __dietlibc__
++	LIBC=dietlibc
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
++	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++	exit ;;
++    ia64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    m32r*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    m68*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    mips:Linux:*:* | mips64:Linux:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#undef CPU
++	#undef ${UNAME_MACHINE}
++	#undef ${UNAME_MACHINE}el
++	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++	CPU=${UNAME_MACHINE}el
++	#else
++	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++	CPU=${UNAME_MACHINE}
++	#else
++	CPU=
++	#endif
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
++	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++	;;
++    or32:Linux:*:*)
++	echo or32-unknown-linux-gnu
++	exit ;;
++    padre:Linux:*:*)
++	echo sparc-unknown-linux-gnu
++	exit ;;
++    parisc64:Linux:*:* | hppa64:Linux:*:*)
++	echo hppa64-unknown-linux-gnu
++	exit ;;
++    parisc:Linux:*:* | hppa:Linux:*:*)
++	# Look for CPU level
++	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
++	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
++	  *)    echo hppa-unknown-linux-gnu ;;
++	esac
++	exit ;;
++    ppc64:Linux:*:*)
++	echo powerpc64-unknown-linux-gnu
++	exit ;;
++    ppc:Linux:*:*)
++	echo powerpc-unknown-linux-gnu
++	exit ;;
++    s390:Linux:*:* | s390x:Linux:*:*)
++	echo ${UNAME_MACHINE}-ibm-linux
++	exit ;;
++    sh64*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    sh*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    sparc:Linux:*:* | sparc64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    tile*:Linux:*:*)
++	echo ${UNAME_MACHINE}-tilera-linux-gnu
++	exit ;;
++    vax:Linux:*:*)
++	echo ${UNAME_MACHINE}-dec-linux-gnu
++	exit ;;
++    x86_64:Linux:*:*)
++	echo x86_64-unknown-linux-gnu
++	exit ;;
++    xtensa*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    i*86:DYNIX/ptx:4*:*)
++	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++	# earlier versions are messed up and put the nodename in both
++	# sysname and nodename.
++	echo i386-sequent-sysv4
++	exit ;;
++    i*86:UNIX_SV:4.2MP:2.*)
++	# Unixware is an offshoot of SVR4, but it has its own version
++	# number series starting with 2...
++	# I am not positive that other SVR4 systems won't match this,
++	# I just have to hope.  -- rms.
++	# Use sysv4.2uw... so that sysv4* matches it.
++	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
++	exit ;;
++    i*86:OS/2:*:*)
++	# If we were able to find `uname', then EMX Unix compatibility
++	# is probably installed.
++	echo ${UNAME_MACHINE}-pc-os2-emx
++	exit ;;
++    i*86:XTS-300:*:STOP)
++	echo ${UNAME_MACHINE}-unknown-stop
++	exit ;;
++    i*86:atheos:*:*)
++	echo ${UNAME_MACHINE}-unknown-atheos
++	exit ;;
++    i*86:syllable:*:*)
++	echo ${UNAME_MACHINE}-pc-syllable
++	exit ;;
++    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
++	echo i386-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    i*86:*DOS:*:*)
++	echo ${UNAME_MACHINE}-pc-msdosdjgpp
++	exit ;;
++    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
++	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
++	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
++		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
++	else
++		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
++	fi
++	exit ;;
++    i*86:*:5:[678]*)
++	# UnixWare 7.x, OpenUNIX and OpenServer 6.
++	case `/bin/uname -X | grep "^Machine"` in
++	    *486*)	     UNAME_MACHINE=i486 ;;
++	    *Pentium)	     UNAME_MACHINE=i586 ;;
++	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++	esac
++	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++	exit ;;
++    i*86:*:3.2:*)
++	if test -f /usr/options/cb.name; then
++		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
++		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
++	elif /bin/uname -X 2>/dev/null >/dev/null ; then
++		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
++			&& UNAME_MACHINE=i586
++		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++			&& UNAME_MACHINE=i686
++		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++			&& UNAME_MACHINE=i686
++		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
++	else
++		echo ${UNAME_MACHINE}-pc-sysv32
++	fi
++	exit ;;
++    pc:*:*:*)
++	# Left here for compatibility:
++	# uname -m prints for DJGPP always 'pc', but it prints nothing about
++	# the processor, so we play safe by assuming i586.
++	# Note: whatever this is, it MUST be the same as what config.sub
++	# prints for the "djgpp" host, or else GDB configury will decide that
++	# this is a cross-build.
++	echo i586-pc-msdosdjgpp
++	exit ;;
++    Intel:Mach:3*:*)
++	echo i386-pc-mach3
++	exit ;;
++    paragon:*:*:*)
++	echo i860-intel-osf1
++	exit ;;
++    i860:*:4.*:*) # i860-SVR4
++	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
++	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++	else # Add other i860-SVR4 vendors below as they are discovered.
++	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
++	fi
++	exit ;;
++    mini*:CTIX:SYS*5:*)
++	# "miniframe"
++	echo m68010-convergent-sysv
++	exit ;;
++    mc68k:UNIX:SYSTEM5:3.51m)
++	echo m68k-convergent-sysv
++	exit ;;
++    M680?0:D-NIX:5.3:*)
++	echo m68k-diab-dnix
++	exit ;;
++    M68*:*:R3V[5678]*:*)
++	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
++	OS_REL=''
++	test -r /etc/.relid \
++	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
++	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++	  && { echo i486-ncr-sysv4; exit; } ;;
++    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
++	OS_REL='.3'
++	test -r /etc/.relid \
++	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
++	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
++	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++	echo m68k-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    mc68030:UNIX_System_V:4.*:*)
++	echo m68k-atari-sysv4
++	exit ;;
++    TSUNAMI:LynxOS:2.*:*)
++	echo sparc-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    rs6000:LynxOS:2.*:*)
++	echo rs6000-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
++	echo powerpc-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    SM[BE]S:UNIX_SV:*:*)
++	echo mips-dde-sysv${UNAME_RELEASE}
++	exit ;;
++    RM*:ReliantUNIX-*:*:*)
++	echo mips-sni-sysv4
++	exit ;;
++    RM*:SINIX-*:*:*)
++	echo mips-sni-sysv4
++	exit ;;
++    *:SINIX-*:*:*)
++	if uname -p 2>/dev/null >/dev/null ; then
++		UNAME_MACHINE=`(uname -p) 2>/dev/null`
++		echo ${UNAME_MACHINE}-sni-sysv4
++	else
++		echo ns32k-sni-sysv
++	fi
++	exit ;;
++    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++			# says <Richard.M.Bartel@ccMail.Census.GOV>
++	echo i586-unisys-sysv4
++	exit ;;
++    *:UNIX_System_V:4*:FTX*)
++	# From Gerald Hewes <hewes@openmarket.com>.
++	# How about differentiating between stratus architectures? -djm
++	echo hppa1.1-stratus-sysv4
++	exit ;;
++    *:*:*:FTX*)
++	# From seanf@swdc.stratus.com.
++	echo i860-stratus-sysv4
++	exit ;;
++    i*86:VOS:*:*)
++	# From Paul.Green@stratus.com.
++	echo ${UNAME_MACHINE}-stratus-vos
++	exit ;;
++    *:VOS:*:*)
++	# From Paul.Green@stratus.com.
++	echo hppa1.1-stratus-vos
++	exit ;;
++    mc68*:A/UX:*:*)
++	echo m68k-apple-aux${UNAME_RELEASE}
++	exit ;;
++    news*:NEWS-OS:6*:*)
++	echo mips-sony-newsos6
++	exit ;;
++    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
++	if [ -d /usr/nec ]; then
++		echo mips-nec-sysv${UNAME_RELEASE}
++	else
++		echo mips-unknown-sysv${UNAME_RELEASE}
++	fi
++	exit ;;
++    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
++	echo powerpc-be-beos
++	exit ;;
++    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
++	echo powerpc-apple-beos
++	exit ;;
++    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
++	echo i586-pc-beos
++	exit ;;
++    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
++	echo i586-pc-haiku
++	exit ;;
++    SX-4:SUPER-UX:*:*)
++	echo sx4-nec-superux${UNAME_RELEASE}
++	exit ;;
++    SX-5:SUPER-UX:*:*)
++	echo sx5-nec-superux${UNAME_RELEASE}
++	exit ;;
++    SX-6:SUPER-UX:*:*)
++	echo sx6-nec-superux${UNAME_RELEASE}
++	exit ;;
++    SX-7:SUPER-UX:*:*)
++	echo sx7-nec-superux${UNAME_RELEASE}
++	exit ;;
++    SX-8:SUPER-UX:*:*)
++	echo sx8-nec-superux${UNAME_RELEASE}
++	exit ;;
++    SX-8R:SUPER-UX:*:*)
++	echo sx8r-nec-superux${UNAME_RELEASE}
++	exit ;;
++    Power*:Rhapsody:*:*)
++	echo powerpc-apple-rhapsody${UNAME_RELEASE}
++	exit ;;
++    *:Rhapsody:*:*)
++	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
++	exit ;;
++    *:Darwin:*:*)
++	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++	case $UNAME_PROCESSOR in
++	    i386)
++		eval $set_cc_for_build
++		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++		      grep IS_64BIT_ARCH >/dev/null
++		  then
++		      UNAME_PROCESSOR="x86_64"
++		  fi
++		fi ;;
++	    unknown) UNAME_PROCESSOR=powerpc ;;
++	esac
++	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++	exit ;;
++    *:procnto*:*:* | *:QNX:[0123456789]*:*)
++	UNAME_PROCESSOR=`uname -p`
++	if test "$UNAME_PROCESSOR" = "x86"; then
++		UNAME_PROCESSOR=i386
++		UNAME_MACHINE=pc
++	fi
++	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++	exit ;;
++    *:QNX:*:4*)
++	echo i386-pc-qnx
++	exit ;;
++    NEO-?:NONSTOP_KERNEL:*:*)
++	echo neo-tandem-nsk${UNAME_RELEASE}
++	exit ;;
++    NSE-?:NONSTOP_KERNEL:*:*)
++	echo nse-tandem-nsk${UNAME_RELEASE}
++	exit ;;
++    NSR-?:NONSTOP_KERNEL:*:*)
++	echo nsr-tandem-nsk${UNAME_RELEASE}
++	exit ;;
++    *:NonStop-UX:*:*)
++	echo mips-compaq-nonstopux
++	exit ;;
++    BS2000:POSIX*:*:*)
++	echo bs2000-siemens-sysv
++	exit ;;
++    DS/*:UNIX_System_V:*:*)
++	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++	exit ;;
++    *:Plan9:*:*)
++	# "uname -m" is not consistent, so use $cputype instead. 386
++	# is converted to i386 for consistency with other x86
++	# operating systems.
++	if test "$cputype" = "386"; then
++	    UNAME_MACHINE=i386
++	else
++	    UNAME_MACHINE="$cputype"
++	fi
++	echo ${UNAME_MACHINE}-unknown-plan9
++	exit ;;
++    *:TOPS-10:*:*)
++	echo pdp10-unknown-tops10
++	exit ;;
++    *:TENEX:*:*)
++	echo pdp10-unknown-tenex
++	exit ;;
++    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++	echo pdp10-dec-tops20
++	exit ;;
++    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++	echo pdp10-xkl-tops20
++	exit ;;
++    *:TOPS-20:*:*)
++	echo pdp10-unknown-tops20
++	exit ;;
++    *:ITS:*:*)
++	echo pdp10-unknown-its
++	exit ;;
++    SEI:*:*:SEIUX)
++	echo mips-sei-seiux${UNAME_RELEASE}
++	exit ;;
++    *:DragonFly:*:*)
++	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++	exit ;;
++    *:*VMS:*:*)
++	UNAME_MACHINE=`(uname -p) 2>/dev/null`
++	case "${UNAME_MACHINE}" in
++	    A*) echo alpha-dec-vms ; exit ;;
++	    I*) echo ia64-dec-vms ; exit ;;
++	    V*) echo vax-dec-vms ; exit ;;
++	esac ;;
++    *:XENIX:*:SysV)
++	echo i386-pc-xenix
++	exit ;;
++    i*86:skyos:*:*)
++	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++	exit ;;
++    i*86:rdos:*:*)
++	echo ${UNAME_MACHINE}-pc-rdos
++	exit ;;
++    i*86:AROS:*:*)
++	echo ${UNAME_MACHINE}-pc-aros
++	exit ;;
++esac
++
++#echo '(No uname command or uname output not recognized.)' 1>&2
++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
++
++eval $set_cc_for_build
++cat >$dummy.c <<EOF
++#ifdef _SEQUENT_
++# include <sys/types.h>
++# include <sys/utsname.h>
++#endif
++main ()
++{
++#if defined (sony)
++#if defined (MIPSEB)
++  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
++     I don't know....  */
++  printf ("mips-sony-bsd\n"); exit (0);
++#else
++#include <sys/param.h>
++  printf ("m68k-sony-newsos%s\n",
++#ifdef NEWSOS4
++	"4"
++#else
++	""
++#endif
++	); exit (0);
++#endif
++#endif
++
++#if defined (__arm) && defined (__acorn) && defined (__unix)
++  printf ("arm-acorn-riscix\n"); exit (0);
++#endif
++
++#if defined (hp300) && !defined (hpux)
++  printf ("m68k-hp-bsd\n"); exit (0);
++#endif
++
++#if defined (NeXT)
++#if !defined (__ARCHITECTURE__)
++#define __ARCHITECTURE__ "m68k"
++#endif
++  int version;
++  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
++  if (version < 4)
++    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++  else
++    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
++  exit (0);
++#endif
++
++#if defined (MULTIMAX) || defined (n16)
++#if defined (UMAXV)
++  printf ("ns32k-encore-sysv\n"); exit (0);
++#else
++#if defined (CMU)
++  printf ("ns32k-encore-mach\n"); exit (0);
++#else
++  printf ("ns32k-encore-bsd\n"); exit (0);
++#endif
++#endif
++#endif
++
++#if defined (__386BSD__)
++  printf ("i386-pc-bsd\n"); exit (0);
++#endif
++
++#if defined (sequent)
++#if defined (i386)
++  printf ("i386-sequent-dynix\n"); exit (0);
++#endif
++#if defined (ns32000)
++  printf ("ns32k-sequent-dynix\n"); exit (0);
++#endif
++#endif
++
++#if defined (_SEQUENT_)
++    struct utsname un;
++
++    uname(&un);
++
++    if (strncmp(un.version, "V2", 2) == 0) {
++	printf ("i386-sequent-ptx2\n"); exit (0);
++    }
++    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++	printf ("i386-sequent-ptx1\n"); exit (0);
++    }
++    printf ("i386-sequent-ptx\n"); exit (0);
++
++#endif
++
++#if defined (vax)
++# if !defined (ultrix)
++#  include <sys/param.h>
++#  if defined (BSD)
++#   if BSD == 43
++      printf ("vax-dec-bsd4.3\n"); exit (0);
++#   else
++#    if BSD == 199006
++      printf ("vax-dec-bsd4.3reno\n"); exit (0);
++#    else
++      printf ("vax-dec-bsd\n"); exit (0);
++#    endif
++#   endif
++#  else
++    printf ("vax-dec-bsd\n"); exit (0);
++#  endif
++# else
++    printf ("vax-dec-ultrix\n"); exit (0);
++# endif
++#endif
++
++#if defined (alliant) && defined (i860)
++  printf ("i860-alliant-bsd\n"); exit (0);
++#endif
++
++  exit (1);
++}
++EOF
++
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++	{ echo "$SYSTEM_NAME"; exit; }
++
++# Apollos put the system type in the environment.
++
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
++
++# Convex versions that predate uname can use getsysinfo(1)
++
++if [ -x /usr/convex/getsysinfo ]
++then
++    case `getsysinfo -f cpu_type` in
++    c1*)
++	echo c1-convex-bsd
++	exit ;;
++    c2*)
++	if getsysinfo -f scalar_acc
++	then echo c32-convex-bsd
++	else echo c2-convex-bsd
++	fi
++	exit ;;
++    c34*)
++	echo c34-convex-bsd
++	exit ;;
++    c38*)
++	echo c38-convex-bsd
++	exit ;;
++    c4*)
++	echo c4-convex-bsd
++	exit ;;
++    esac
++fi
++
++cat >&2 <<EOF
++$0: unable to guess system type
++
++This script, last modified $timestamp, has failed to recognize
++the operating system you are using. It is advised that you
++download the most up to date version of the config scripts from
++
++  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++and
++  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++If the version you run ($0) is already up to date, please
++send the following data and any information you think might be
++pertinent to <config-patches@gnu.org> in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo               = `(hostinfo) 2>/dev/null`
++/bin/universe          = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch              = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM  = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
++
++exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+--- adjtimex-1.29.orig/debian/compat
++++ adjtimex-1.29/debian/compat
+@@ -0,0 +1 @@
++5
+--- adjtimex-1.29.orig/debian/changelog
++++ adjtimex-1.29/debian/changelog
+@@ -0,0 +1,753 @@
++adjtimex (1.29-2.2) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Make the package multiarch-ready: add build-arch and build-indep
++    build targets
++  * Fix pending l10n issues. Debconf translations:
++    - Vietnamese (Clytie Siddall).  Closes: #601529
++    - Brazilian Portuguese (Flamarion Jorge).  Closes: #610409
++    - Dutch (Michiel Sikkes).  Closes: #625744
++
++ -- Christian Perrier <bubulle@debian.org>  Mon, 04 Jul 2011 07:06:43 +0200
++
++adjtimex (1.29-2.1) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Fix pending l10n issues. Debconf translations:
++    - Czech (Martin Sin).  Closes: #589289
++    - Bokmål, Norwegian (Bjørn Steensrud).  Closes: #600279
++
++ -- Christian Perrier <bubulle@debian.org>  Tue, 19 Oct 2010 07:14:50 +0200
++
++adjtimex (1.29-2) unstable; urgency=low
++
++  * debian/postinst: check conffile for corruption (Closes:Bug#571633,
++    thanks to Savvas Radevic <vicedar@gmail.com> for the idea, though I
++    chose a different implementation.)
++
++ -- James R. Van Zandt <jrv@debian.org>  Tue, 25 May 2010 20:49:21 -0400
++
++adjtimex (1.29-1) unstable; urgency=low
++
++  * New upstream release: Document the --force-adjust
++    option. --force-adjust suppresses warning printouts. Relax sanity
++    check to +- 1 percent.
++
++  * debian/adjtimexconfig: Use --force-adjust option, so adjustment is
++    applied even if system clock is way off.  (Thanks to Santiago Vila
++    <sanvila@unex.es> for helping to diagnose the problem.
++    Closes:Bug#557949, #559882)
++  
++  * debian/adjtimex.init: fix LSB comment header: require $local_fs, start
++    in S
++
++ -- James R. Van Zandt <jrv@debian.org>  Fri, 16 Apr 2010 20:08:49 -0400
++
++adjtimex (1.28-4) unstable; urgency=low
++
++  * Update debconf template translations:
++    Swedish (Thanks to Martin Bagge <brother@bsnet.se>, Closes:Bug#572579) 
++
++ -- James R. Van Zandt <jrv@debian.org>  Wed, 17 Mar 2010 19:51:06 -0400
++
++adjtimex (1.28-3) unstable; urgency=low
++
++  * Update debconf template translations:
++    Swedish (Thanks to Martin Bagge <brother@bsnet.se>, Closes:Bug#562932) 
++    Russian (thanks to Yuri Kozlov <yuray@komyakino.ru>, Closes:Bug#563347)
++    Finnish (thanks to Esko =?UTF-8?Q?Araj=C3=A4rvi?= <edu@iki.fi>, 
++    Closes:Bug#564508)
++
++  * debian/control: bump standards version to 3.8.4 (no changes needed)
++
++ -- James R. Van Zandt <jrv@debian.org>  Mon, 08 Feb 2010 20:19:44 -0500
++
++adjtimex (1.28-2) unstable; urgency=low
++
++  * Move Swedish and Russian template translations to the correct directory
++    (thanks to Martin Bagge <brother@bsnet.se> for pointing out the
++    problem).
++
++  * debian/control: bump standards version to 3.8.3 (no changes needed)
++  
++ -- James R. Van Zandt <jrv@debian.org>  Fri, 05 Feb 2010 21:42:54 -0500
++
++adjtimex (1.28-1) unstable; urgency=low
++
++  * New upstream release: (compare): Correctly apply +-500 ppm sanity
++    check (Thanks to Jacques luder <j.luder@laposte.net>)
++
++  * Update debconf template translations: 
++    Swedish (thanks to: Martin Bagge <brother@bsnet.se>,
++    Closes:Bug#533567)
++    Russian (thanks to: Yuri Kozlov <yuray@komyakino.ru>,
++    Closes:Bug#532068)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 07 Nov 2009 11:59:29 -0500
++
++adjtimex (1.27.1-4) unstable; urgency=low
++
++  * Update translations: 
++    Japanese (thanks to: Hideki Yamane, henrich @ debian.or.jp.
++    Closes:Bug#538242)
++    Spanish (Thanks to Francisco Javier Cuadrado <fcocuadrado@gmail.com>,
++    Closes:Bug#538425)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 26 Jul 2009 17:36:16 -0400
++
++adjtimex (1.27.1-3) unstable; urgency=low
++
++  * Update translations:
++    Japanese (thanks to: Hideki Yamane, henrich @ debian.or.jp. 
++    Closes:Bug#525233)
++    Swedish (thanks to: Martin Bagge <brother@bsnet.se>.  Closes:Bug#525924)
++    Spanish (thanks to: Francisco Javier Cuadrado <fcocuadrado@gmail.com>, 
++    Closes:Bug#528621)
++    Russian (thanks to: Yuri Kozlov <yuray@komyakino.ru>, Closes:Bug#529047)
++    Czech (thanks to: Martin Sin <martin.sin@zshk.cz>, Closes:Bug#529652)
++
++ -- James R. Van Zandt <jrv@debian.org>  Tue, 26 May 2009 20:47:42 -0400
++
++adjtimex (1.27.1-2) unstable; urgency=low
++
++  * Debconf templates and debian/control reviewed by the debian-l10n-
++    english team as part of the Smith review project. Closes: #519431
++  * Update translation:
++    French (Closes:Bug#520986)
++
++ -- James R. Van Zandt <jrv@debian.org>  Wed, 20 May 2009 22:03:38 -0400
++
++adjtimex (1.27.1-1) unstable; urgency=low
++
++  * New upstream release.  Provide workaround if linux/rtc.h
++    is missing (Closes:#308864)
++  
++  * debian/rules: delete config temporaries, but not config.h.in
++  * debian/control: bump version to 3.8.1 (no changes needed)
++
++  * Update translations:
++    Japanese (Thanks to: henrich@debian.or.jp [188] Closes:Bug#522188)
++    Czech (Thanks to: martin.sin@zshk.cz [219] Closes:Bug#522193)
++    Swedish (Thanks to: brother@bsnet.se [194] Closes:Bug#522979)
++    Basque (Thanks to: pi+debian@beobide.net [207] Closes:Bug#523079)
++    Italian (Thanks to: vinz65@gmail.com [197] Closes:Bug#523419)
++    Spanish (Thanks to: fcocuadrado@gmail.com [193] Closes:Bug#523915)
++    Russian (Thanks to: yuray@komyakino.ru [223] Closes:Bug#524069)
++    German (Thanks to: schanzi_@gmx.de [226] Closes:Bug#524224)
++    Portuguese (Thanks to: carloslisboa@gmail.com [170] Closes:Bug#524283)
++    Danish (Thanks to: debian@overbygaard.dk [209] Closes:Bug#524368)
++    Galician (Thanks to: mvillarino@gmail.com [216] Closes:Bug#524397)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 18 Apr 2009 16:35:22 -0400
++
++adjtimex (1.27-1) unstable; urgency=low
++
++  * New upstream release.  If using update interrupt, sanity check the
++    delay.  Sometimes the status includes an update complete flag, but it
++    actually didn't wait.  Fall back to another method of reading RTC
++    (closes:Bug#517732) Calculate RTC correction as PPM of RTC time
++    (Thanks to Alain Guibert, closes:Bug#308863).
++    
++  * debian/control: add ${misc:Depends} per lintian warning.
++  
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 22 Mar 2009 21:54:51 -0400
++
++adjtimex (1.26-2) unstable; urgency=low
++
++  * debian/templates: Clarify wording: ask about running "when installed
++    or upgraded" not just "at installation time" (thanks to Uwe Storbeck
++    <uwe@ibr.ch> and Michael Meskes <meskes@debian.org>,
++    Closes:Bug#514987)
++  
++  * debian/postinst: don't prepend path to command running adjtimexconfig
++    to silence lintian complaint.  (The package management system already
++    puts /usr/sbin in path, because that's where install-info is.)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 14 Feb 2009 11:46:24 -0500
++
++adjtimex (1.26-1) unstable; urgency=low
++
++  * New upstream release. Fix a possible hang with the Intersil ISL1208,
++    one of those new non-PC-compatible RTCs. Cleanly exits with an error
++    message, instead of either hang or returning garbage. (Thanks to Alain
++    Guibert).
++  
++  * debian/control: bump Debian policy version to 3.8.0 (no changes needed)
++  
++  * debian/rules: use "filter" instead of "findstring" to parse
++    DEB_BUILD_OPTIONS.
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 17 Aug 2008 17:52:14 -0400
++
++adjtimex (1.25-1) unstable; urgency=low
++
++  * New upstream release.  Set an alarm to avoid blocking even if /dev/rtc
++    never becomes readable, then fall back to busywait. New --nointerrupt
++    option to force busywait without first waiting for the interrupt
++    timeout (thanks to Alain Guibert). (closes:Bug#477637,Bug#474337).
++    Update man page (closes:Bug#435956).
++
++ -- James R. Van Zandt <jrv@debian.org>  Fri, 08 Aug 2008 19:43:38 -0400
++
++adjtimex (1.24-1) unstable; urgency=low
++
++  * New upstream release
++
++  * adjtimex.c: Reorganize cmos_read_time() to properly integrate the
++    fallback case for when /dev/rtc has no interrupts. Make this fallback
++    actually work. fixes partially(?) Debian bug #460065 (Thanks to Alain
++    Guibert <alguibert@free.fr>) (closes:Bug#471203)
++
++  * (cmos_read_time): Fix Y2K bug: read century from byte 50, instead of
++    assuming we're in the range 1969-2068.
++
++  * Implement second kind of busywait (busywait_second_change): when
++    /dev/rtc interrupt is not available, fallbacks to loops around
++    ioctl(RTC_RD_TIME) until the RTC second changes. Patch applies to
++    adjtimex 1.23 above first no-interrupt-fallback.patch fixes
++    partially(?) Debian bug #460065 (Thanks to: Alain Guibert
++    <alguibert@free.fr>)
++
++  * (cmos_read_time) If /dev/rtc does not exist then automatically
++    fallback to /dev/rtc0, so it works even without symlink. (Thanks to:
++    Alain Guibert <alguibert@free.fr>)
++
++  * adjtimex.c (main): fix typo in options handling (thanks to Miroslav
++    Lichvar <mlichvar@redhat.com>)
++
++  * debian/control: bump Debian policy version to 3.7.3 (no changes needed)
++
++  * debian/dirs: don't install empty directory /usr/bin
++
++ -- James R. Van Zandt <jrv@debian.org>  Fri, 04 Apr 2008 22:05:01 -0400
++
++adjtimex (1.23-1) unstable; urgency=low
++
++  * New upstream release
++
++  * adjtimex.c (compare): In case of absence of /etc/adjtime, do not fail,
++    and do not force users to manually create it with 0.0
++    content. Instead, proceed assuming zero values (meaning RTC does not
++    drift). Also replace redundant code by a call to
++    get_cmos_adjustment(). README: Rewrite USAGE paragraph. Remove point
++    about creating zero adjfile. Document new behaviour without
++    adjfile. Remove reference to the long outdated clock(8). Update URL
++    for hwclock(8).  (Thanks to Alain Guibert <alguibert@free.fr>,
++    closes:bug#445448)
++
++  * adjtimex.c (busy_wait): timestamp more closely the RTC clock beat
++    (thanks to Alain Guibert <alguibert at free.fr>, see Debian
++    bug#443814). (usage): --directisa switch forces adjtimex to poll the
++    update-in-process (UIP) flag of the CMOS clock (thanks to Alain
++    Guibert <alguibert at free.fr>, closes:bug#443773).
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 06 Oct 2007 21:57:04 -0400
++
++adjtimex (1.22-1) unstable; urgency=low
++
++  * New upstream release: fix these bugs in ntpdate output
++    interpretation (closes:bug#438718):
++    adjtimex has a bug in evaluating the output of ntpdate, because
++        1. it assumes ntpdate outputs "adjust time server", but ntpdate
++    may output "step time server" also
++        2. it doesnt stop at last line but as soon as it has found "filter
++    offset:" lines, and because of this it will not find the "offset ..."
++    information in the last line.
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 23 Sep 2007 12:51:52 -0400
++
++adjtimex (1.21.1-3) unstable; urgency=low
++
++  * update German translation of debconf templates, thanks to Erik Schanze
++    <eriks@debian.org> and Helge Kreutzmann
++    <debian@helgefjell.de>(closes:#436080)
++  
++  * debian/rules don't ignore failure of "make distclean"
++  
++  * debian/adjtimex.init: make LSB compliant
++
++ -- James R. Van Zandt <jrv@debian.org>  Mon, 06 Aug 2007 21:39:47 -0400
++
++adjtimex (1.21.1-2) unstable; urgency=low
++
++  * Update French translation of debconf templates, thanks to Christian
++    Perrier <bubulle@debian.org> (closes:Bug#403472)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun,  7 Jan 2007 18:10:32 -0500
++
++adjtimex (1.21.1-1) unstable; urgency=low
++
++  * New upstream release.
++
++  * adjtimex.c: don't declare adjtimex syscall (should already be getting
++    the declaration from sys/timex.h) Thanks to Andreas Jochens
++    <aj@andaco.de> (closes:#390989)
++  
++ -- James R. Van Zandt <jrv@debian.org>  Sat,  7 Oct 2006 08:04:52 -0400
++
++adjtimex (1.21-2) unstable; urgency=low
++
++  * Makefile: correct version number to 1.21 (error in importing upstream
++    sources)
++    
++  * debian/control: depend on po-debconf
++
++ -- James R. Van Zandt <jrv@debian.org>  Fri,  6 Oct 2006 20:41:00 -0400
++
++adjtimex (1.21-1) unstable; urgency=low
++
++  * New upstream release.  use /dev/rtc if available (closes:#196692). Use
++    heuristic to correct for DST changes or lacking --utc flag
++    (closes:#308396). check return code in probe_time() so if root
++    privileges are needed (e.g. "adjtimex -r") and lacking, command will
++    fail rather than printing bogus results. (closes:#364060)
++
++  * debian/postinst: start with invoke-rc.d if available (closes:#367746)
++  
++  * debian/control: update to policy 3.7.2
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 20 May 2006 08:33:05 -0400
++
++adjtimex (1.20-7) unstable; urgency=low
++
++  * debian/README.Debian: correct references to files, which are no longer
++    in /usr/doc/adjtimex (closes:#365761)
++  * debian/rules: declare debhelper compat level 5
++  * debian/control: build-depends on debhelper ver 5
++
++ -- James R. Van Zandt <jrv@debian.org>  Thu,  4 May 2006 21:54:33 -0400
++
++adjtimex (1.20-6) unstable; urgency=low
++
++  * control: depend on debconf | debconf-2.0 (closes: #331733), update to
++    policy 3.6.2
++  * debian/po/de.po: fix spelling error in German translation, thanks to
++    Philipp Meier <meier@meisterbohne.de> (closes: #279254)
++  * debian/po/sv.po: Swedish translation for debconf template, courtesy
++    of Daniel Nylander <yeager@lidkoping.net> (closes: #333124)
++  * debian/po: Add Portugese  translation for debconf template, courtesy of
++    Miguel Figueiredo <elmig@debianpt.org> (closes: #336333)
++  * debian/po: Add Russian translation for debconf template, courtesy of
++    Yuri Kozlov <kozlov.y@gmail.com> (closes: #337967)
++  * debian/copyright: update FSF address.
++
++ -- James R. Van Zandt <jrv@debian.org>  Fri, 25 Nov 2005 21:04:08 -0500
++
++adjtimex (1.20-5) unstable; urgency=low
++
++  * debian/po/vi.po: Vietnamese translation for debconf template, courtesy
++    of Clytie Siddall <clytie@riverland.net.au> (closes:Bug#307600)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat,  7 May 2005 11:58:47 -0400
++
++adjtimex (1.20-4) unstable; urgency=low
++
++  * debian/po/cs.po: Czech translation for debconf template, courtesy of
++    Martin Šín <martin.sin@seznam.cz> (closes:Bug#304377)
++
++ -- James R. Van Zandt <jrv@debian.org>  Mon, 25 Apr 2005 20:14:42 -0400
++
++adjtimex (1.20-3) unstable; urgency=low
++
++  * debian/adjtimex.init: adjust printout to conform to Debian standard,
++    output error to stderr (Thanks to Thomas Hood, closes:bug#294824)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 13 Mar 2005 17:20:28 -0500
++
++adjtimex (1.20-2) unstable; urgency=low
++
++  * debian/po/de.po: replace corrupted file (closes: #250250)
++
++ -- James R. Van Zandt <jrv@debian.org>  Mon, 20 Sep 2004 20:08:47 -0400
++
++adjtimex (1.20-1) unstable; urgency=low
++
++  * New upstream release
++
++  * adjtimex.c (compare): in "compare" or "adjust", return immediately
++    after printing last result, instead of sleeping an extra $interval
++    seconds. (Thanks to Alain Guibert <derogaton at oreka.com>,
++    closes:Bug#243652)
++
++  * postinst: remove /etc/rcS.d/S20adjtimex link if configured not to run
++    at startup (thanks to Mario 'BitKoenig' Holbe, closes:Bug#267229)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 19 Sep 2004 12:41:37 -0400
++
++adjtimex (1.19-1) unstable; urgency=high
++
++  * copyright: report upstream source address (closes:Bug#269691)
++
++  * control: don't depend on either mawk or awk, since either works and
++    awk is required (closes:Bug#267228)
++
++  * New upstream release
++
++  * adjtimex.c (compare): Account for the current frequency value
++  when calculating the recommended frequency value.  Simplify
++  calculation of recommended tick. (compare): print estimated system 
++  error in ppm instead of obscure "second diff".
++
++  * adjtimex.8: use 2^16 instead of the more obscure 1<<16.
++
++  * adjtimex.c: revert to poll-wait instead of using /dev/rtc, because the
++    latter only provides time with one second precision and so gives
++    wildly inaccurate adjustments. (closes:Bug#269498,Bug#265839)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat, 11 Sep 2004 16:01:52 -0400
++
++adjtimex (1.18-1.1) unstable; urgency=medium
++
++  * Non-maintainer upload prepared by Joshua Kwan and Ken Bloom.
++  * Applied patch from Jurij Smakov <jurij@wooyd.org> to #263401:
++    - Fixes the regular expression used to extract the baseline value 
++      from the adjtimex output. Closes: #263401
++    - Replaces non-POSIX compliant calls to ('tail -1') by the 
++      POSIX-compliant ones ('tail -n 1')
++    - Cosmetic changes to the adjtimexconfig output, making it 
++      consistent with the general Debian style.
++  * Add German debconf template translations (closes: #250250)
++
++ -- Ken Bloom <kabloom@ucdavis.edu>  Thu, 12 Aug 2004 23:34:33 -0700
++
++adjtimex (1.18-1) unstable; urgency=low
++
++  * New upstream release
++  
++  * call reset_time_status() only when explicitly told to (thanks to Alain
++    Guibert <derogaton at oreka.com>, closes:bug#243031)
++
++  * Add debconf translations for Japanese (closes:bug#223462), Danish
++    (closes:bug#239865), and Brazilian Portuguese (closes:bug#228281).
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 11 Apr 2004 18:32:33 -0400
++
++adjtimex (1.17-1) unstable; urgency=low
++
++  * New upstream release
++
++  * control: compliant with Debian policy version 3.6.1
++
++  * es.po: decode "quoted-printable" encoding.
++  
++  * adjtimex.c: update email 
++    (main): If adjtimex() returns an error, print HZ and legal ranges
++    for tick and freq.  (thanks to Sami Farin <safari at iki.fi>)
++    (review): calculate reasonable tick and frequency when HZ != 100.
++    (cmos_init): use /dev/rtc when available (thanks to Richard
++    Henderson <rth at twiddle.net>).
++
++  * adjtimex.c: --status switch sets clock status (courtesy of Alain
++    Guibert <derogaton at oreka.com>) (closes:bug#242732)
++
++  * adjtimexconfig: set reasonable tick and frequency when HZ !=
++    100. (closes:Bug#241726)
++
++  * adjtimex.c (longopt): fix spelling to match documentation: --esterror
++    and --maxerror (thanks to Alain Guibert) (fixes:Bug#241863)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sat,  3 Apr 2004 21:13:09 -0500
++
++adjtimex (1.16-3) unstable; urgency=low
++
++  * Dutch translation of gettext debconf templates (courtesy of  Michiel Sikkes, closes:bug#215162)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 12 Oct 2003 17:33:55 -0400
++
++adjtimex (1.16-2) unstable; urgency=low
++
++  * Polish translation of gettext debconf templates (courtesy of  Bartosz
++    Zapalowski, closes:bug#208955)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun,  7 Sep 2003 16:26:30 -0400
++
++adjtimex (1.16-1) unstable; urgency=low
++
++  * New upstream release (closes:Bug#204382)(closes:Bug#204377)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun, 24 Aug 2003 20:52:32 -0400
++
++adjtimex (1.15.1-2) unstable; urgency=low
++
++  * gettext-based debconf templates (closes:bug#205788)
++  * French translation of gettext debconf templates (closes:Bug#206430)
++  * Spanish translation of gettext debconf templates (closes:Bug#197485)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 24 Aug 2003 18:01:56 -0400
++
++adjtimex (1.15.1-1) unstable; urgency=low
++
++  * New upstream release. Add explicit newlines in multi-line help text
++    (closes:bug#194858) 
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 31 May 2003 20:53:14 -0400
++
++adjtimex (1.15-1) unstable; urgency=low
++
++  * New upstream release.  Now compiles on ia64 (closes:bug#141655).
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Wed, 30 Apr 2003 19:38:11 -0400
++
++adjtimex (1.14-1) unstable; urgency=low
++
++  * New Upstream Release.  Expanded documentation (closes:bug#142967)
++  * convert to debhelper
++  * debian/control: depend on debconf
++  * debian/postinst: configure adjtimex to run on startup, and run
++    adjtimexconfig on installation, only if asked by sysadmin (via
++    debconf) (closes:bug#158047)
++  * debian/postrm: purge debconf db entry
++  * debian/adjtimexconfig: config file is now /etc/default/adjtimex
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun, 27 Apr 2003 21:28:40 -0400
++
++adjtimex (1.13-1) unstable; urgency=low
++
++  * New upstream release (closes:Bug#127483)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun,  6 Jan 2002 21:06:23 -0500
++
++adjtimex (1.12-3) unstable; urgency=low
++
++  * New maintainer email (fix remaining references)
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun,  9 Dec 2001 15:25:06 -0500
++
++adjtimex (1.12-2) unstable; urgency=low
++
++  * New maintainer email
++
++ -- James R. Van Zandt <jrv@debian.org>  Sun,  9 Dec 2001 13:24:59 -0500
++
++adjtimex (1.12-1) unstable; urgency=low
++
++  * New upstream release
++  * debian/control: move Build-Depends entry to source section
++    (closes:bug#91928).  Policy version 3.5.2 
++  * debian/rules: by default, compile without -g option.  Honor
++    DEB_BUILD_OPTIONS.  
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Wed, 22 Nov 2000 01:37:58 -0500
++
++adjtimex (1.11-3) unstable; urgency=low
++
++  * adjtimexconfig: install new values in /etc/adjtimex.conf rather than
++    the startup script /etc/init.d/adjtimex (thanks to Zsolt Szabo
++    <szazs@mm.bme.hu>).
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 30 Sep 2000 09:34:58 -0400
++
++adjtimex (1.11-2) unstable; urgency=low
++
++  * build-depends on debmake
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun,  3 Sep 2000 13:50:02 -0400
++
++adjtimex (1.11-1) unstable; urgency=low
++
++  * /etc/init.d/adjtimex: restart|force-reload also run adjtimex
++    (closes:bug#69514), add comment explaining precedence of
++    /etc/adjtimex.conf 
++
++  * New upstream release
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 28 Aug 2000 21:19:48 -0400
++
++adjtimex (1.10-1) frozen unstable; urgency=high
++
++  * New upstream release - security fix: use popen() to recover output from
++    ntpdate, instead of an unsafe temporary file (thanks to Colin Phipps
++    <crp22@cam.ac.uk>) (closes:bug#56752)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Tue,  1 Feb 2000 21:29:03 -0500
++
++adjtimex (1.9-2) unstable; urgency=low
++
++  * Suggest ntpdate (closes:bug#56751)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 31 Jan 2000 19:26:16 -0500
++
++adjtimex (1.9-1) unstable; urgency=low
++
++  * New upstream release
++  * Removed pointer to /usr/doc/copyright/GPL
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon,  3 Jan 2000 21:34:59 -0500
++
++adjtimex (1.8.1-1) unstable; urgency=low
++
++  * New upstream release (closes:bug#52637)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Thu, 16 Dec 1999 20:13:43 -0500
++
++adjtimex (1.8-4) unstable; urgency=low
++
++  * Change references from /usr/sbin/adjtimex to /sbin/adjtimex in
++    adjtimexconfig
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Tue,  2 Nov 1999 20:21:48 -0500
++
++adjtimex (1.8-3) unstable; urgency=low
++
++  * *Really* install binary into /sbin, so it is available
++    even if /usr is not mounted (closes:Bug#44399)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 30 Oct 1999 17:57:57 -0400
++
++adjtimex (1.8-2) unstable; urgency=low
++
++  * Install compatibility symlink /usr/doc/adjtimex.
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun, 24 Oct 1999 10:54:01 -0400
++
++adjtimex (1.8-1) unstable; urgency=low
++
++  * New upstream release: Install binary into /sbin, so it is available
++    even if /usr is not mounted (closes:Bug#44399)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon,  6 Sep 1999 13:08:15 -0400
++
++adjtimex (1.7-2) unstable; urgency=low
++
++  * Link against glibc2.1
++  * Upgrade to FHS
++  * Include full license statement in copyright file
++  * Revise GPL reference in copyright file
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat,  4 Sep 1999 12:04:34 -0400
++
++adjtimex (1.7-1) unstable; urgency=low
++
++  * install configuration file in /etc/init.d rather than /etc/rc.boot
++  closes: #30120, #32436.
++  * New upstream release (incorporates Paul Slootman's alpha patch)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 28 Nov 1998 20:33:38 -0500
++
++adjtimex (1.6-2) unstable; urgency=low
++
++  * corrected reference in man page: clock -> hwclock (Bug#27854)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 24 Oct 1998 14:40:45 -0400
++
++adjtimex (1.6-1.1) unstable; urgency=low
++
++  * non-maintainer (binary-only) upload for Alpha
++  * changed architecture back to 'any'. Why should it be i386 only?
++  * don't use syscall1() to declare adjtimex() for Alpha
++
++ -- Paul Slootman <paul@debian.org>  Tue,  8 Sep 1998 20:42:52 +0200
++
++adjtimex (1.6-1) unstable; urgency=low
++
++  * New upstream release: Default log file is "/var/log/clocks.log".
++    Create log file if it does not exist. (Bug#25834)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 22 Aug 1998 20:33:22 -0400
++
++adjtimex (1.5-3) unstable; urgency=low
++
++  * architecture is i386 only
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 29 Jun 1998 19:35:22 -0400
++
++adjtimex (1.5-2) unstable; urgency=low
++
++  * eliminate question in postinst, by eliminating postinst entirely
++    (Bug#22288) 
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sun,  7 Jun 1998 20:51:42 -0400
++
++adjtimex (1.5-1) frozen unstable; urgency=low
++
++  * New upstream release.  No functional changes, but adjtimex is now
++    covered by the GNU GPL. (Bug#21358)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Mon, 20 Apr 1998 21:38:53 -0400
++
++adjtimex (1.4-2) unstable; urgency=low
++
++  * Ensure that changelog is compressed *before* calculating md5sum
++    (Bug#19266)
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Sat, 14 Mar 1998 20:47:52 -0500
++
++adjtimex (1.4-1) unstable; urgency=low
++
++  * New upstream release.  Log times for long-term estimation of drifts.
++
++ -- James R. Van Zandt <jrv@vanzandt.mv.com>  Thu, 11 Dec 1997 21:48:01 -0500
++
++adjtimex (1.3-3) stable; urgency=medium
++
++  * Moved temporary files from /tmp to /etc, to eliminate security
++    hole (bug #11610).
++
++ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Sun, 3 Aug 1997 11:34:48 -0400
++
++adjtimex (1.3-2) stable; urgency=medium
++
++  * Removed conflict with xntp, since ntpdate from the xntp package
++    is still compatible with adjtimex.
++
++ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Wed, 12 Mar 1997 21:01:05 -0500
++
++adjtimex (1.3-1) unstable; urgency=HIGH
++
++  * New upstream version: Previous version allows 2.0 kernel to reset
++    the CMOS clock periodically.  Now using different method of
++    preventing this.
++  * New --compare switch to compare system and CMOS clocks (replacing
++    the separate program clockdiff) and suggest better values of time
++    parameters.  New --adjust switch to actually install the suggested
++    values.  GNU format long switches, including --help and --version.
++  * Revised conftimex to use --adjust switch instead of clockdiff.
++  * Renamed conftimex to adjtimexconfig per Debian recommendation.
++  * Added conftimex man page.
++  * Revised messages in postinst to better explain what is going on.
++  * Conflicts with xntp
++  * New maintainer
++
++ -- Jim Van Zandt <jrv@vanzandt.mv.com>  Sat, 1 Mar 1997 18:03:35 -0500
++
++adjtimex (1.2-5) unstable; urgency=LOW
++
++  * New packaging format
++  * Corrected comment in /etc/rc.boot/adjtimex
++  * Corrected the installation of doc files
++
++ -- Michael Meskes <meskes@debian.org>  Wed, 18 Sep 1996 09:22:51 +0200
++
++Fri May 17 12:48:07 MET DST 1996 Michael Meskes (meskes@debian.org)
++
++	adjtimex (1.2-1):
++	
++	* Added Debian Linux package maintenance system files.
++
++Fri May 17 20:39:30 MET DST 1996 Michael Meskes	(meskes@debian.org)
++
++        adjtimex (1.2-2):
++
++	* Corrected mode for /etc/rc.boot/adjtimex
++
++	* Added conftimex script
++
++	* Automatically configure system
++
++Sun Jun 30 13:17:53 MET DST 1996 Michael Meskes (meskes@debian.org)
++
++        adjtimex (1.2-3):
++
++	* Corrected rules file for new naming scheme
++
++	* Gzip manpage
++
++	* Strip binaries
++
++Tue Jul  2 10:01:35 MET DST 1996 Michael Meskes (meskes@debian.org)
++
++        adjtimex (1.2-4):
++
++	* Really say what we're doing in postinst (Bug#3474)
++
++
+--- adjtimex-1.29.orig/debian/adjtimexconfig.8
++++ adjtimex-1.29/debian/adjtimexconfig.8
+@@ -0,0 +1,41 @@
++.\"{{{  Title                    Emacs major mode should be: -*- nroff -*-
++.TH ADJTIMEXCONFIG 8 "April 27, 2003"
++.\"}}}
++.\"{{{  Name
++.SH NAME
++adjtimexconfig \- find kernel clock variables and save for reboots
++.\"}}}
++.\"{{{  Synopsis
++.SH SYNOPSIS
++.ad l
++.\" commands only
++.B /sbin/adjtimexconfig
++.\"}}}
++.\"{{{  Config
++.SH DESCRIPTION
++This script uses \fBadjtimex\fP(8) to find values for the kernel
++variables \fBtick\fP and \fBfrequency\fP that will make the system
++clock approximately agree with the CMOS clock.  It then saves these
++values in the configuration file \fI/etc/default/adjtimex\fP so the
++settings will be restored on every boot, when
++\fI/etc/init.d/adjtimex\fP runs.
++.P
++\fPadjtimexconfig\fP uses the drift rate recorded in
++\fI/etc/adjtime\fP to adjust the times it reads from the CMOS clock.
++If you find the CMOS clock has a systematic drift, read the
++\fBclock\fP(8) or \fBhwclock\fP(8) manual page, modify
++\fI/etc/adjtime\fP as required, and run \fBadjtimexconfig\fP again.
++.SH AUTHOR
++Michael Meskes <meskes@debian.org>.
++.\"}}}
++.\"{{{
++.SH FILES
++.nf
++\fI/etc/default/adjtimex\fP
++\fI/etc/init.d/adjtimex\fP
++.fi
++.\"}}}
++.\"{{{  See also
++.SH "SEE ALSO"
++.BR adjtimex "(8), "clock "(8), "hwclock "(8), "ntpd (8)
++.\"}}}
+--- adjtimex-1.29.orig/debian/adjust
++++ adjtimex-1.29/debian/adjust
+@@ -0,0 +1,15 @@
++         mode: 16384
++       offset: 0
++    frequency: 0
++     maxerror: 0
++     esterror: 0
++       status: 0
++time_constant: 0
++    precision: 0
++    tolerance: 0
++         tick: 0
++     raw time:  0s 0us = 0.000000
++for this kernel:
++   USER_HZ = 100 (nominally 100 ticks per second)
++   9000 <= tick <= 11000
++   -33554432 <= frequency <= 33554432
+--- adjtimex-1.29.orig/debian/dirs
++++ adjtimex-1.29/debian/dirs
+@@ -0,0 +1,3 @@
++usr/sbin
++sbin
++usr/share/man/man8
+--- adjtimex-1.29.orig/debian/adjtimexconfig
++++ adjtimex-1.29/debian/adjtimexconfig
+@@ -0,0 +1,67 @@
++#!/bin/sh
++
++conffile=/etc/default/adjtimex
++startfile=/etc/init.d/adjtimex
++
++echo -n "Comparing clocks (this will take 70 sec)..."
++
++# Get the parameters
++
++/sbin/adjtimex --print --tick 0  >/etc/adj.adjust  2>/dev/null
++baseline=`awk '/<= tick/{print ($1+$NF)/2}' /etc/adj.adjust`
++hz=`awk '/USER_HZ/{print $3}' /etc/adj.adjust`
++/sbin/adjtimex  --tick $baseline  --frequency 0
++/sbin/adjtimex  --adjust --force-adjust >/etc/adj.adjust
++echo "done."
++ticks=`tail -n 1 /etc/adj.adjust|awk '{print $6}'`
++freq=`tail -n 1 /etc/adj.adjust|awk '{print $7}'`
++# cat /etc/adj.adjust
++# echo hz=$hz baseline=$baseline ticks=$ticks freq=$freq
++rm /etc/adj.adjust
++adjt=`awk "BEGIN{print (($ticks-$baseline)*$hz + $freq/65536.)*.0864}"`
++echo -n "Adjusting system time by ${adjt} sec/day to agree with CMOS clock..."
++
++# Recreate /etc/adjtimex.conf if necessary
++
++if [ -f $conffile ]; then 
++#   echo "using existing $conffile";
++    true;
++else 
++cat >$conffile <<EOF
++#  $conffile - configuration file for adjtimex(8)
++#
++#  you may adjust these values manually or by calling /usr/sbin/adjtimexconfig
++#
++#  This file is sourced by $startfile
++#
++TICK=$TICK
++FREQ=$FREQ
++
++EOF
++fi
++
++# Reset values in $conffile
++
++sed -e "s/^TICK=.*/TICK=$ticks/"		\
++    -e "s/^FREQ=.*/FREQ=$freq/"			\
++    $conffile >$conffile.TMP &&			\
++    mv $conffile.TMP $conffile
++
++# grep "TICK=" /etc/init.d/adjtimex | cut -d'#' -f1 > /etc/adj.tick
++# grep "FREQ=" /etc/init.d/adjtimex | cut -d'#' -f1 > /etc/adj.freq
++# 
++# TICKLINE="`echo -n "TICK="$ticks" # old: "; cat /etc/adj.tick`"
++# FREQLINE="`echo -n "FREQ="$freq" # old: "; cat /etc/adj.freq`"
++# 
++# cp /etc/init.d/adjtimex /etc/init.d/adjtimex.TMP
++# sed -e "s/^TICK=.*/$TICKLINE/" -e "s/^FREQ=.*/$FREQLINE/" \
++#  < /etc/init.d/adjtimex.TMP > /etc/init.d/adjtimex
++# 
++# if [ -s /etc/init.d/adjtimex ]
++# then
++# 	  rm -f /etc/init.d/adjtimex.TMP
++# fi
++# rm -f /etc/adj.tick /etc/adj.freq /etc/adj.adjust
++rm -f /etc/adj.adjust
++echo "done."
++
+--- adjtimex-1.29.orig/debian/postrm
++++ adjtimex-1.29/debian/postrm
+@@ -0,0 +1,25 @@
++#! /bin/sh -e
++
++case "$1" in
++    purge)
++	rm -f /etc/adjtimex.conf /etc/default/adjtimex
++	update-rc.d adjtimex remove >/dev/null
++	if [ -e /usr/share/debconf/confmodule ]; then
++          # Source debconf library.
++	    . /usr/share/debconf/confmodule
++          # Remove my changes to the db.
++echo "removing debconf db entries"
++	    db_purge
++echo "removed debconf db entries"
++	fi
++	;;
++    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
++	exit 0
++	;;
++    *)
++	echo "postrm called with unknown argument \`$1'" >&2
++	exit 0
++	;;
++esac
++
++#DEBHELPER#
+--- adjtimex-1.29.orig/debian/control
++++ adjtimex-1.29/debian/control
+@@ -0,0 +1,20 @@
++Source: adjtimex
++Section: admin
++Priority: optional
++Maintainer: James R. Van Zandt <jrv@debian.org>
++Build-Depends: debhelper (>= 5), po-debconf
++Standards-Version: 3.8.4
++
++Package: adjtimex
++Architecture: any
++Depends:  ${misc:Depends}, ${shlibs:Depends}, debconf | debconf-2.0
++Suggests: ntpdate
++Description: kernel time variables configuration utility
++ This package provides a utility to manipulate the kernel time
++ variables.  For a machine connected to the Internet, or equipped with
++ a precision oscillator or radio clock, the best way to keep the
++ system clock accurate is using NTP (Network Time Protocol).  However,
++ for a standalone or intermittently connected machine, you may use
++ adjtimex instead to at least correct for systematic drift.  It can
++ optionally adjust the system clock using the CMOS clock as a
++ reference, and can log times for long-term estimation of drift rates.
+--- adjtimex-1.29.orig/debian/adjtimex.init
++++ adjtimex-1.29/debian/adjtimex.init
+@@ -0,0 +1,45 @@
++#!/bin/sh
++#
++# Run ADJTIMEX at startup.
++
++### BEGIN INIT INFO
++# Provides:          adjtimex
++# Required-Start:    $local_fs
++# Required-Stop:     
++# Should-Start:      
++# Should-Stop:       
++# Default-Start:     S
++# Default-Stop:
++# Short-Description: set the kernel time variables
++# Description:       set the kernel time variables
++### END INIT INFO
++
++test -x /sbin/adjtimex  || exit 0
++
++# default values
++TICK=10000
++FREQ=0
++ 
++# values in $cfg take precedence over the values here
++cfg=/etc/default/adjtimex
++
++if [ -f $cfg ]; then
++  . $cfg
++fi
++
++case "$1" in
++  start|restart|force-reload)
++    echo -n "Regulating system clock..."
++    /sbin/adjtimex -tick "$TICK" -frequency "$FREQ"
++    echo "done."
++    ;;
++  stop|status)
++    ;;
++  *)
++    echo "/etc/init.d/adjtimex: unknown command $1" >&2
++    echo "Usage: /etc/init.d/adjtimex {start|stop|restart|force-reload}" >&2
++    exit 3
++    ;;
++esac
++
++exit 0
+--- adjtimex-1.29.orig/debian/copyright
++++ adjtimex-1.29/debian/copyright
+@@ -0,0 +1,28 @@
++This package was debianized by James R. Van Zandt jrv@debian.org on
++Thu, 11 Dec 1997 21:48:01 -0500.
++
++This package was put together by Jim Van Zandt <jrv@debian.org>,
++who also maintains the program and therefore used the master sources.
++
++Copyright:
++
++adjtimex is Copyright (C) 1997 Steven S. Dick and James R. Van Zandt
++
++   This program is free software; you can redistribute it and/or
++   modify it under the terms of the GNU General Public License as
++   published by the Free Software Foundation; version 2 dated June,
++   1991, or any later version.
++
++   This program is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++   GNU General Public License for more details.
++
++   You should have received a copy of the GNU General Public License
++   along with this program; if not, write to the Free Software
++   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++   02110-1301, USA.
++
++On Debian GNU/Linux systems, the complete text of the GNU Public
++License can be found in `/usr/share/common-licenses/'
++
+--- adjtimex-1.29.orig/debian/templates
++++ adjtimex-1.29/debian/templates
+@@ -0,0 +1,35 @@
++# These templates have been reviewed by the debian-l10n-english
++# team
++#
++# If modifications/additions/rewording are needed, please ask
++# debian-l10n-english@lists.debian.org for advice.
++#
++# Even minor modifications require translation updates and such
++# changes should be coordinated with translators and reviewers.
++
++Template: adjtimex/run_daemon
++Type: boolean
++Default: true
++_Description: Should adjtimex be run at installation and at every startup?
++ Running adjtimex at system startup will set the kernel time parameters to
++ the values in /etc/default/adjtimex.
++ .
++ You should not choose this option if you just want to
++ use adjtimex to inspect the current parameters.
++
++Template: adjtimex/compare_rtc
++Type: boolean
++Default: true
++#flag:comment:2
++# Translators: do not translate "tick" and "frequency"
++_Description: Run adjtimexconfig when adjtimex is installed or upgraded?
++ The adjtimexconfig script will use adjtimex to find values for the kernel
++ variables "tick" and "frequency" that will make the system clock approximately
++ agree with the hardware clock (also known as the CMOS clock).  It then
++ saves these values in the configuration file /etc/default/adjtimex so the
++ settings will be restored on every boot, when /etc/init.d/adjtimex runs.
++ .
++ The script takes 70 seconds to run, so running it for every upgrade
++ may be a waste of time. Alternatively, you can run adjtimexconfig
++ manually when needed, or determine the kernel variables by using other
++ methods and set them manually in /etc/default/adjtimex.
+--- adjtimex-1.29.orig/debian/docs
++++ adjtimex-1.29/debian/docs
+@@ -0,0 +1,2 @@
++README
++README.ru
+--- adjtimex-1.29.orig/debian/config
++++ adjtimex-1.29/debian/config
+@@ -0,0 +1,8 @@
++#! /bin/sh -e
++
++# Source debconf library.
++. /usr/share/debconf/confmodule
++
++db_input medium adjtimex/run_daemon || true
++db_input medium adjtimex/compare_rtc || true
++db_go
+--- adjtimex-1.29.orig/debian/rules
++++ adjtimex-1.29/debian/rules
+@@ -0,0 +1,117 @@
++#!/usr/bin/make -f
++# Sample debian/rules that uses debhelper.
++# GNU copyright 1997 to 1999 by Joey Hess.
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++# These are used for cross-compiling and for saving the configure script
++# from having to guess our platform (since we know it already)
++DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
++DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
++
++
++package=adjtimex
++
++CFLAGS = -Wall -g
++INSTALL = install
++INSTALL_FILE    = $(INSTALL) -p    -o root -g root  -m  644
++INSTALL_PROGRAM = $(INSTALL) -p    -o root -g root  -m  755
++INSTALL_SCRIPT  = $(INSTALL) -p    -o root -g root  -m  755
++INSTALL_DIR     = $(INSTALL) -p -d -o root -g root  -m  755
++
++ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
++CFLAGS += -O0
++else
++CFLAGS += -O2
++endif
++ifeq (,$(filter nostrip,$(DEB_BUILD_OPTIONS)))
++INSTALL_PROGRAM += -s
++endif
++# parallel build isn't worth while
++
++config.status: configure
++	dh_testdir
++	# configure the package.
++	./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
++	touch config.h
++
++build: build-arch build-indep
++
++build-arch: build-stamp
++
++build-indep: build-stamp
++
++build-stamp:  config.status
++	dh_testdir
++
++	# compile the package.
++	$(MAKE) CFLAGS="$(CFLAGS)"
++	#/usr/bin/docbook-to-man debian/adjtimex.sgml > adjtimex.1
++
++	touch build-stamp
++
++clean:
++	dh_testdir
++	dh_testroot
++	rm -f build-stamp 
++
++	# clean up after the build process.
++	debconf-updatepo
++	[ ! -f Makefile ] || $(MAKE) veryclean
++	rm -rf adjtimex *.o config.cache config.log config.status
++	-test -r /usr/share/misc/config.sub && \
++	  cp -f /usr/share/misc/config.sub config.sub
++	-test -r /usr/share/misc/config.guess && \
++	  cp -f /usr/share/misc/config.guess config.guess
++
++
++	dh_clean
++
++install: build
++	dh_testdir
++	dh_testroot
++	dh_clean -k
++	dh_installdirs
++
++	# install the package into debian/$(package).
++	$(INSTALL_PROGRAM) adjtimex $(CURDIR)/debian/$(package)/sbin
++	$(INSTALL_SCRIPT)  debian/adjtimexconfig			\
++		$(CURDIR)/debian/$(package)/usr/sbin/adjtimexconfig
++
++# Build architecture-independent files here.
++binary-indep: build install
++# We have nothing to do
++
++# Build architecture-dependent files here.
++binary-arch: build install
++	dh_testdir
++	dh_testroot
++	dh_installdebconf	
++	dh_installdocs
++	dh_installexamples
++	dh_installmenu
++#	dh_installlogrotate
++#	dh_installemacsen
++#	dh_installpam
++#	dh_installmime
++	dh_installinit -n
++	dh_installcron
++	dh_installman adjtimex.8 debian/adjtimexconfig.8
++	dh_installinfo
++#	dh_undocumented
++	dh_installchangelogs ChangeLog
++	dh_link
++	dh_strip
++	dh_compress
++	dh_fixperms
++#	dh_makeshlibs
++	dh_installdeb
++#	dh_perl
++	dh_shlibdeps
++	dh_gencontrol
++	dh_md5sums
++	dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary install 
+--- adjtimex-1.29.orig/debian/postinst
++++ adjtimex-1.29/debian/postinst
+@@ -0,0 +1,123 @@
++#! /bin/sh
++
++set -e
++
++# Source debconf library.
++. /usr/share/debconf/confmodule
++
++#		 old scripts
++oldfile=/etc/adjtimex.conf
++olderfile=/etc/rc.boot/adjtimex
++#		 new starting script
++startfile=/etc/init.d/adjtimex
++#		 new configuration file
++conffile=/etc/default/adjtimex
++
++create_adjtimex_conf()
++{
++
++    TICK=10000
++    FREQ=0
++	
++    if [ -f $oldfile ]; then
++	TICK=`awk '
++	BEGIN{tick=10000;}
++	/[ \t]*TICK[ \t]*=[ \t]*"?[0-9]+"?/ {
++	    sub(/[ \t]*TICK[ \t]*=[ \t]*"?/,"");
++	    tick=$0+0;
++	}
++	END {print tick;}
++	' $oldfile` 
++
++	FREQ=`awk '
++	BEGIN{freq=0;}
++	/[ \t]*FREQ[ \t]*=[ \t]*"?[0-9]+"?/ {
++	    sub(/[ \t]*FREQ[ \t]*=[ \t]*"?/,"");
++	    freq=$0+0;
++	}
++	END {print freq;}
++	' $oldfile` 
++
++#	echo "parameters from $oldfile: TICK=$TICK FREQ=$FREQ";
++    else 
++	if [ -f $olderfile ]; then
++	    TICK=`awk '
++	    BEGIN{tick=10000;}
++	    /[ \t]*TICK[ \t]*=[ \t]*"?[0-9]+"?/ {
++		sub(/[ \t]*TICK[ \t]*=[ \t]*"?/,"");
++	    tick=$0+0;
++	}
++	END {print tick;}
++	' $olderfile` 
++	    
++	    FREQ=`awk '
++	    BEGIN{freq=0;}
++	    /[ \t]*FREQ[ \t]*=[ \t]*"?[0-9]+"?/ {
++		sub(/[ \t]*FREQ[ \t]*=[ \t]*"?/,"");
++		freq=$0+0;
++	    }
++	    END {print freq;}
++	    ' $olderfile` 
++
++#	    echo "parameters from $olderfile: TICK=$TICK FREQ=$FREQ";
++	fi
++    fi
++    
++	if [ -f $conffile ]; then 
++#	    echo "using existing $conffile";
++	    true;
++	else 
++	    if [ -d /etc/default ]; then true; else mkdir /etc/default; fi
++	    cat >$conffile <<EOF
++#  $conffile - configuration file for adjtimex(8)
++#
++#  you may adjust these values manually or by calling /usr/sbin/adjtimexconfig
++#
++#  This file is sourced by $startfile
++#
++TICK=$TICK
++FREQ=$FREQ
++
++EOF
++	fi
++
++	rm -f $oldfile $olderfile
++}
++
++
++case "$1" in
++    configure)
++
++# A previous installation may have left a corrupt conffile.
++# The regexp matches only blank lines, comments, and integer assignments:
++	egrep -qv '^([:space:]*(#.*)?|[:space:]*[a-zA-Z][a-zA-Z0-9]*[:space:]*=[:space:]*[0-9]+[:space:]*)$' $conffile && rm -f $conffile
++
++	create_adjtimex_conf
++
++	db_get adjtimex/run_daemon
++	if [ "$RET" = "true" ]; then
++	    update-rc.d adjtimex start 20 S . >/dev/null
++    
++	    if which invoke-rc.d >/dev/null 2>&1; then
++		invoke-rc.d adjtimex start
++	    else
++		/etc/init.d/adjtimex start
++	    fi
++	fi
++
++	db_get adjtimex/compare_rtc
++	if [ "$RET" = "true" ]; then
++	    adjtimexconfig
++	fi
++
++	;;
++    abort-upgrade|abort-remove|abort-deconfigure)
++	exit 0
++	;;
++    *)
++	echo "postinst called with unknown argument \`$1'" >&2
++	exit 0
++	;;
++esac
++
++#DEBHELPER#
+--- adjtimex-1.29.orig/debian/README.Debian
++++ adjtimex-1.29/debian/README.Debian
+@@ -0,0 +1,21 @@
++adjtimex for DEBIAN
++----------------------
++
++This is the Debian Linux prepackaged version of adjtimex.
++
++This package was put together by Jim Van Zandt <jrv@debian.org>,
++who also maintains the program and therefore used the master sources.
++
++further Information:
++
++* adjtimex manpage
++* copying policy 
++	/usr/share/doc/adjtimex/copyright
++	(or debian/copyright in the source package)
++* changelog for debian package
++	/usr/share/doc/adjtimex/changelog.Debian	 
++* adjtimex's README:
++	/usr/share/doc/adjtimex/README
++
++
++James R. Van Zandt <jrv@debian.org>, Sun,  7 Mar 1999 21:58:51 -0500
+--- adjtimex-1.29.orig/debian/po/fr.po
++++ adjtimex-1.29/debian/po/fr.po
+@@ -0,0 +1,90 @@
++# Translation of adjtimex debconf screen to French
++# Copyright (C) 2005-2009 Debian French l10n team <debian-l10n-french@lists.debian.org>
++# This file is distributed under the same license as the adjtimex package.
++#
++# Christian Perrier <bubulle@debian.org>, 2006, 2009.
++# Translators:
++msgid ""
++msgstr ""
++"Project-Id-Version: fr\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-03-17 07:45+0100\n"
++"Last-Translator: Christian Perrier <bubulle@debian.org>\n"
++"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
++"Language: fr\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Faut-il lancer adjtimex lors de l'installation et à chaque démarrage du "
++"système ?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Adjtimex peut être lancé au démarrage du système afin de régler les "
++"paramètres d'horloge du noyau en fonction des valeurs contenues dans /etc/"
++"default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Vous ne devriez pas choisir cette option si vous souhaitez simplement vous "
++"servir d'adjtimex pour consulter les paramètres actuels."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"Faut-il lancer adjtimexconfig lors de l'installation ou de la mise à jour ?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Le script adjtimexconfig utilise adjtimex afin de trouver les valeurs "
++"appropriées pour les variables du noyau concernant le battement (« tick ») "
++"et la fréquence d'horloge. Cela permettra à l'horloge du système d'être à "
++"peu près en accord avec l'horloge matérielle (parfois appelée « horloge "
++"CMOS »). Ces valeurs seront alors conservées dans le fichier de "
++"configuration /etc/default/adjtimex ce qui permettra de les restaurer à "
++"chaque démarrage quand /etc/init.d/adjtimex s'exécutera. "
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"La durée d'exécution du script est de 70 secondes, ce qui peut être vu comme "
++"une perte de temps au démarrage. Vous pouvez également utiliser "
++"adjtimexconfig vous-même plus tard ou déterminer les valeurs des variables "
++"du noyau d'une autre manière. Ces valeurs devront ensuite être placées dans /"
++"etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/it.po
++++ adjtimex-1.29/debian/po/it.po
+@@ -0,0 +1,85 @@
++# ITALIAN TRANSLATION OF ADJTIMEX'S.PO-DEBCONF FILE
++# COPYRIGHT (C) 2009 THE ADJTIMEX'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the adjtimex package.
++#
++# Vincenzo Campanella <vinz65@gmail.com>, 2009.
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.26-3\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-01 14:15+0200\n"
++"Last-Translator: Vincenzo Campanella <vinz65@gmail.com>\n"
++"Language-Team: Italian <tp@lists.linux.it>\n"
++"Language: it\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Eseguire adjtimex all'installazione e con ogni avvio del sistema?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"L'esecuzione di adjtimex all'avvio del sistema imposterà i parametri di "
++"tempo del kernel ai valori contenuti in «/etc/default/adjtimex»."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Non si dovrebbe scegliere questa opzione se si prevede di usare adjtimex "
++"solo per verificare i parametri attuali."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Eseguire adjtimexconfig quando adjtimex viene installato o aggiornato?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Lo script adjtimexconfig userà adjtimex per trovare i valori delle variabili "
++"del kernel «tick» e «frequency» per fare in modo che l'orario del sistema "
++"coincida approssimativamente a quello dell'orologio dell'hardware (anche "
++"conosciuto come orologio CMOS). Questi valori vengono poi salvati nel file "
++"di configurazione «/etc/default/adjtimex», in modo che le impostazioni "
++"vengano ripristinate a ogni avvio, quando «/etc/init.d/adjtimex» viene "
++"eseguito."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Lo script necessita di 70 secondi per essere eseguito, per cui lanciarlo a "
++"ogni aggiornamento potrebbe essere uno spreco di tempo. In alternativa è "
++"possibile eseguire manualmente adjtimexconfig quando è necessario, oppure "
++"determinare le variabili del kernel usando altri metodi e impostandole "
++"manualmente in «/etc/default/adjtimex»."
+--- adjtimex-1.29.orig/debian/po/pt_BR.po
++++ adjtimex-1.29/debian/po/pt_BR.po
+@@ -0,0 +1,96 @@
++#
++#    Translators, if you are not familiar with the PO format, gettext
++#    documentation is worth reading, especially sections dedicated to
++#    this format, e.g. by running:
++#         info -n '(gettext)PO Files'
++#         info -n '(gettext)Header Entry'
++#
++#    Some information specific to po-debconf are available at
++#            /usr/share/doc/po-debconf/README-trans
++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++#    Developers do not need to manually edit POT or PO files.
++# André Luís Lopes <andrelop@debian.org>, 2010.
++# Flamarion Jorge <jorge.flamarion@gmail.com>, 2010.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.29-2.1\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-11-11 22:16-0200\n"
++"Last-Translator: Flamarion Jorge <jorge.flamarion@gmail.com>\n"
++"Language-Team: Brazilian Portuguese <debian-l10n-portuguese@lists.debian."
++"org>\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=2; plural=(n > 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "O adjtimex deve ser executado na instalação e em cada inicialização?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Executar o adjtimex na inicialização do sistema configurará os parâmetros de "
++"tempo do kernel para os valores em /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Você não deve escolher esta opção se você apenas quer usar o adjtimex para "
++"inspecionar os parâmetros atuais."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"Executar o adjtimexconfig quando o adjtimex for instalado ou atualizado?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"O script adjtimexconfig usará o adjtimex para encontrar valores para as "
++"variáveis \"tick\" e \"frequency\" do kernel, que farão o relógio do sistema "
++"o mais próximo do relógio do hardware (também conhecido como o relógio da "
++"CMOS). Ele então salva estes valores no arquivo de configuração /etc/default/"
++"adjtimex, assim as configurações serão restauradas a cada inicialização, "
++"quando o /etc/init.d/adjtimex executar."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"O script leva 70 segundos para rodar, portanto rodá-lo a cada atualização "
++"pode ser um desperdício de tempo. Alternativamente, você pode executar o "
++"adjtimexconfig manualmente quando necessário, ou determinar as variáveis de "
++"kernel usando outros métodos e configurá-las manualmente em /etc/default/"
++"adjtimex."
+--- adjtimex-1.29.orig/debian/po/templates.pot
++++ adjtimex-1.29/debian/po/templates.pot
+@@ -0,0 +1,68 @@
++# SOME DESCRIPTIVE TITLE.
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
++#
++#, fuzzy
++msgid ""
++msgstr ""
++"Project-Id-Version: PACKAGE VERSION\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
++"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
++"Language-Team: LANGUAGE <LL@li.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=CHARSET\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
+--- adjtimex-1.29.orig/debian/po/gl.po
++++ adjtimex-1.29/debian/po/gl.po
+@@ -0,0 +1,85 @@
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++#
++# marce villarino <mvillarino@users.sourceforge.net>, 2009.
++msgid ""
++msgstr ""
++"Project-Id-Version: templates_[OK3397]\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-16 22:09+0200\n"
++"Last-Translator: marce villarino <mvillarino@users.sourceforge.net>\n"
++"Language-Team: Galician <proxecto@trasno.ent>\n"
++"Language: gl\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: Lokalize 0.2\n"
++"Plural-Forms: nplurals=2; plural=n != 1;\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Debe executarse adjtimex durante a instalación e con cada inicio do sistema?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Se executa adjtimex durante o inicio do sistema axustará os parámetros de "
++"hora do núcleo cos valores que haxa en /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Non debería escoller esta opción se só desexa empregar adjtimex para "
++"inspeccionar os parámetros actuais."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Desexa executar adjtimexconfig se instala ou actualiza?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"O script adjtimexconfig empregará adjtimex para achar valores paras as "
++"variábeis do núcleo «tick» e «frequency» que fagan que o reloxo do sistema "
++"se corresponda aproximadamente co do hardware (o chamado reloxo da BIOS). "
++"Logo garda eses valores no ficheiro de configuración /etc/default/adjtimex "
++"de xeito que os valores se restauren en cada arranque, cando se executa /etc/"
++"init.d/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"O script tarda 70 segundos en executarse, pode que executalo cada vez que se "
++"actualice pode ser un desperdicio de tempo. En alternativa, pode executar "
++"adjtimexconfig manualmente cando o precise, ou determinar as variábeis do "
++"núcleo empregando outros métodos e axustalas manualmente en /etc/default/"
++"adjtimex."
+--- adjtimex-1.29.orig/debian/po/vi.po
++++ adjtimex-1.29/debian/po/vi.po
+@@ -0,0 +1,82 @@
++# Vietnamese Translation for adjtimex.
++# Copyright © 2010 Free Software Foundation, Inc.
++# Clytie Siddall <clytie@riverland.net.au>, 2005-2010.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.29-2.1\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-10-27 14:39+1030\n"
++"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
++"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
++"Language: vi\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=1; plural=0;\n"
++"X-Generator: LocFactoryEditor 1.8\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "adjtimex có nên chạy vào lúc cài đặt và khi nào khởi động không?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Chạy adjtimex vào lúc khởi chạy hệ thống thì lập các tham số th�i gian của "
++"hạt nhân thành những giá trị trong tập tin « /etc/default/adjtimex »."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Không nên bật tuỳ ch�n này nếu bạn chỉ muốn sử dụng adjtimex để kiểm tra "
++"những tham số hiện th�i."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Chạy adjtimexconfig khi adjtimex được cài đặt hay nâng cấp ?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Văn lệnh cấu hình adjtimexconfig thì sử dụng adjtimex để tìm giá trị cho hai "
++"biến hạt nhân « tick » và « frequency », để làm cho đồng hồ hệ thống tương "
++"ứng xấp xỉ với đồng hồ phần cứng (cũng được g�i như là đồng hồ CMOS). Văn "
++"lệnh này lưu các giá trị đó vào tập tin cấu hình « /etc/default/adjtimex », "
++"để phục hồi thiết lập khi nào việc khởi động chạy « /etc/init.d/adjtimex »."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Văn lệnh này chạy trong khoảng 70 giây thì có thể là bạn không muốn chạy nó "
++"vào mỗi lúc nâng cấp. Bạn cũng có thể chạy adjtimexconfig bằng tay khi cần "
++"thiết, hoặc quyết định những biến hạt nhân bằng phương pháp khác và lập bằng "
++"tay trong tập tin « /etc/default/adjtimex »."
+--- adjtimex-1.29.orig/debian/po/fi.po
++++ adjtimex-1.29/debian/po/fi.po
+@@ -0,0 +1,84 @@
++# Copyright (C) 2009
++# This file is distributed under the same license as the adjtimex package.
++#
++# Esko Arajärvi <edu@iki.fi>, 2010.
++msgid ""
++msgstr ""
++"Project-Id-Version: \n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-01-09 22:59+0200\n"
++"Last-Translator: Esko Arajärvi <edu@iki.fi>\n"
++"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
++"Language: fi\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: Lokalize 1.0\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Tulisiko adjtimex ajaa asennuksen yhteydessä ja aina kun järjestelmä "
++"käynnistetään?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Jos adjtimex ajetaan käynnistettäessä järjestelmä, ytimen aikaparametrit "
++"asetetaan tiedostossa /etc/default/adjtimex annettuihin arvoihin."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Älä valitse tätä vaihtoehtoa, jos haluat käyttää adjtimexiä vain nykyisten "
++"parametriarvojen tarkasteluun."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Tulisiko adjtimexconfig ajaa, kun adjtimex asennetaan tai päivitetään?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Komentosarja adjtimexconfig etsii ohjelman adjtimex avulla ytimen "
++"muuttujille �tick� ja �frequency� arvot, joilla järjestelmän kello näyttää "
++"suunnilleen samaa kuin laitteiston kello (CMOS-kello). Se tallentaa nämä "
++"arvot asetustiedostoon /etc/default/adjtimex, jolloin ne palautetaan "
++"järjestelmän käynnistyessä, kun /etc/init.d/adjtimex ajetaan."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Komentosarjan ajaminen kestää 70 sekuntia, joten sen ajaminen jokaisen "
++"päivityksen yhteydessä saattaa olla ajanhukkaa. Voit vaihtoehtoisesti ajaa "
++"adjtimexconfigin käsin tarvittaessa tai määrittää ytimen muuttujien arvot "
++"muilla keinoin ja asettaa ne käsin tiedostoon /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/pl.po
++++ adjtimex-1.29/debian/po/pl.po
+@@ -0,0 +1,123 @@
++#
++#    Translators, if you are not familiar with the PO format, gettext
++#    documentation is worth reading, especially sections dedicated to
++#    this format, e.g. by running:
++#         info -n '(gettext)PO Files'
++#         info -n '(gettext)Header Entry'
++#
++#    Some information specific to po-debconf are available at
++#            /usr/share/doc/po-debconf/README-trans
++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++#    Developers do not need to manually edit POT or PO files.
++#
++#, fuzzy
++msgid ""
++msgstr ""
++"Project-Id-Version: PACKAGE VERSION\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
++"Last-Translator: Bartosz Zapa³owski <zapal@debian.linux.org.pl>\n"
++"Language-Team: Polish Debian Documentation Project <pddp@debian.linux.org."
++"pl>\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=iso-8859-2\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Czy adjtimex ma byæ uruchomiany podczas instalacji i ka¿dego startu systemu?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#, fuzzy
++#| msgid ""
++#| "adjtimex can run at system startup to set the kernel time parameters to "
++#| "the values in /etc/default/adjtimex. Don't accept if you just want to use "
++#| "adjtimex to inspect the current parameters."
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"adjtimex mo¿e byæ uruchamiany podczas ka¿dego uruchomienia systemu,by "
++"ustawiæ parametry czasu w j±drze na warto¶ci znajduj±ce siê w pliku/etc/"
++"default/adjtimex. Nie wyra¿aj zgody, je¶li chcesz u¿ywaæ adjtimextylko do "
++"sprawdzania aktualnych warto¶ci."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#, fuzzy
++#| msgid ""
++#| "adjtimex can run at system startup to set the kernel time parameters to "
++#| "the values in /etc/default/adjtimex. Don't accept if you just want to use "
++#| "adjtimex to inspect the current parameters."
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"adjtimex mo¿e byæ uruchamiany podczas ka¿dego uruchomienia systemu,by "
++"ustawiæ parametry czasu w j±drze na warto¶ci znajduj±ce siê w pliku/etc/"
++"default/adjtimex. Nie wyra¿aj zgody, je¶li chcesz u¿ywaæ adjtimextylko do "
++"sprawdzania aktualnych warto¶ci."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++#, fuzzy
++#| msgid "Should adjtimexconfig be run at installation time?"
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Czy adjtimexconfig ma byæ uruchomiony podczas instalacji?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++#, fuzzy
++#| msgid ""
++#| "The adjtimexconfig script will use adjtimex to find values for the kernel "
++#| "variables tick and frequency that will make the system clock "
++#| "approximately agree with the hardware clock (also known as the CMOS "
++#| "clock).  It then saves these values in the configuration file /etc/"
++#| "default/adjtimex so the settings will be restored on every boot, when /"
++#| "etc/init.d/adjtimex runs."
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Skrypt adjtimexconfig skorzysta z programu adjtimex do znalezienia "
++"takichwarto¶ci parametrów j±dra tick i frequency, ¿eby zegar systemowy by³ "
++"zbli¿onydo zegara sprzêtowego (zegara CMOS). Nastêpnie zapisze ustawienia w "
++"plikukonfiguracyjnym /etc/default/adjtimex, dziêki czemu warto¶ci te "
++"bêd±przywrócane przy ka¿dym starcie systemu w momencie wykonywania skryptu/"
++"etc/init.d/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++#, fuzzy
++#| msgid ""
++#| "The script takes 70 sec to run. Alternatively, you can run adjtimexconfig "
++#| "yourself at a later time, or determine the kernel variables one of "
++#| "several other ways (see the adjtimex man page) and install them in /etc/"
++#| "default/adjtimex."
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Skrypt bêdzie dzia³a³ przez 70 sekund. Mo¿esz te¿ uruchomiæ "
++"w³asnorêcznieadjtimexconfig w dowolnym czasie lub dobraæ paramterty j±dra w "
++"innysposób (zapoznaj siê ze stron± manuala adjtimex) i zapisaæ je w pliku/"
++"etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/ru.po
++++ adjtimex-1.29/debian/po/ru.po
+@@ -0,0 +1,95 @@
++# translation of adjtimex_1.28-1_ru.po to Russian
++#
++#    Translators, if you are not familiar with the PO format, gettext
++#    documentation is worth reading, especially sections dedicated to
++#    this format, e.g. by running:
++#         info -n '(gettext)PO Files'
++#         info -n '(gettext)Header Entry'
++#    Some information specific to po-debconf are available at
++#            /usr/share/doc/po-debconf/README-trans
++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
++#    Developers do not need to manually edit POT or PO files.
++#
++# Yuri Kozlov <kozlov.y@gmail.com>, 2005.
++# Yuri Kozlov <yuray@komyakino.ru>, 2009, 2010.
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.28-1\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-01-02 09:43+0300\n"
++"Last-Translator: Yuri Kozlov <yuray@komyakino.ru>\n"
++"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
++"Language: ru\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++"Plural-Forms:  nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
++"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Запу�тить adjtimex �ейча� и каждый раз при �тарте �и�темы?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Запу�к adjtimex при включении компьютера выполнит на�тройку значений "
++"параметров времени �дра из файла /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Ответьте отрицательно, е�ли про�то хотите и�пользовать adjtimex дл� проверки "
++"текущих параметров."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Запу�кать adjtimexconfig при у�тановке или обновлении adjtimex?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Сценарий adjtimexconfig и�пользует adjtimex при пои�ке значений переменных "
++"�дра \"tick\" и \"frequency\", которые помогают �огла�овывать �и�темные ча�ы "
++"� аппаратными ча�ами (так называемые ча�ы CMOS). Затем он �охран�ет �ти "
++"значени� в файл на�тройки /etc/default/adjtimex дл� того, чтобы "
++"во��танавливать их � помощью �ценари� /etc/init.d/adjtimex при каждом "
++"запу�ке �и�темы."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Длительно�ть работы �ценари� -- 70 �екунд, по�тому при каждом обновлении "
++"будет така� задержка в работе. В каче�тве альтернативы вы можете запу�тить "
++"adjtimexconfig вручную позже, или определить переменные �дра одним из "
++"не�кольких других �по�обов (�мотрите �правочную �траницу по adjtimex) и "
++"�охранить их в файл /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/ja.po
++++ adjtimex-1.29/debian/po/ja.po
+@@ -0,0 +1,91 @@
++# 

++#    Translators, if you are not familiar with the PO format, gettext

++#    documentation is worth reading, especially sections dedicated to

++#    this format, e.g. by running:

++#         info -n '(gettext)PO Files'

++#         info -n '(gettext)Header Entry'

++# 

++#    Some information specific to po-debconf are available at

++#            /usr/share/doc/po-debconf/README-trans

++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans

++# 

++#    Developers do not need to manually edit POT or PO files.

++# 

++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.27.1-3\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-07-24 18:05+0900\n"
++"Last-Translator: Hideki Yamane (Debian-JP) <henrich@debian.or.jp>\n"
++"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
++"Language: ja\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "adjtimex をインストール時�よ�毎回�起動時�動作�����?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"システム�起動時�カー�ル��時間�パラメータを /etc/default/adjtimex �値�"
++"設定�るよ�� adjtimex を動作��る�������。"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"システム�起動時�カー�ル��時間�パラメータを /etc/default/adjtimex �値�"
++"設定�るよ�� adjtimex を動作��る�������。"
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"adjtimexconfig を adjtimex をインストール��る��アップグレード��時�実行"
++"����?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"adjtimexconfig スクリプト� adjtimex を使用���システムクロックを�ードウェ"
++"アクロック (CMOS クロック���も知られ����) ���よ��期�るよ��カー"
++"�ル変数「tick��「frequency��与�る値を見����。������値を設定"
++"ファイル /etc/default/adjtimex ��存�る���毎回起動時� /etc/init.d/"
++"adjtimex �動作�る際�設定�復元�れ��。"
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"スクリプト�動作� 70 秒も��る��アップグレード�度�毎回実行�る��時間"
++"�無駄��。別解���� adjtimexconfig を後��実行�る����他�方法�"
++"カー�ル変数を決���手動� /etc/default/adjtimex ��設定を行������能"
++"��。"
+--- adjtimex-1.29.orig/debian/po/nb.po
++++ adjtimex-1.29/debian/po/nb.po
+@@ -0,0 +1,82 @@
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++#
++# Bjørn Steensrud <bjornst@skogkatt.homelinux.org>, 2010.
++msgid ""
++msgstr ""
++"Project-Id-Version: \n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-10-15 14:50+0200\n"
++"Last-Translator: Bjørn Steensrud <bjornst@skogkatt.homelinux.org>\n"
++"Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: Lokalize 1.0\n"
++"Plural-Forms: nplurals=2; plural=n != 1;\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Skal adjtimex kjøres ved installasjon og hver gang systemet startes?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Om adjtimex kjøres ved oppstart blir kjernens tidsparametre satt til "
++"verdiene i /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Du bør ikke velge dette hvis du bare vil bruke adjtimex til å se hva de "
++"gjeldende parametrene er."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Skal adjtimexconfig kjøres når adjtimex installeres eller oppgraderes?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Skriptet adjtimexconfig vil bruke adjtimex til å finne verdier for kjerne- "
++"variablene «tick» og «frequency» som vil få systemklokka til å gå omtrent "
++"lik maskinklokka (også kalt CMOS-klokka). Deretter lagres disse verdiene i "
++"oppsettsfila /etc/default/adjtimex, slik at de blir tilbakestilt ved hver "
++"oppstart nåt /etc/init.d/adjtimex kjører."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Skriptet tar 70 sekunder å kjøre, så det kan være bortkastet tid å kjøre det "
++"ved hver oppgradering. Du kan ellers kjøre adjtimexconfig manuelt når det "
++"trengs, eller bestemme kjernevariablene på annen måte og sette dem inn "
++"manuelt i /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/sv.po
++++ adjtimex-1.29/debian/po/sv.po
+@@ -0,0 +1,85 @@
++# Translation of adjtimex debconf template to Swedish
++# Copyright (C) 2009 Martin Bagge <brother@bsnet.se>
++# This file is distributed under the same license as the adjtimex package.
++#
++# Martin Bagge <brother@bsnet.se>, 2009
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.20-5\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-03-17 19:49-0400\n"
++"Last-Translator: Martin Bagge <brother@bsnet.se>\n"
++"Language-Team: Swedish <debian-l10n-swedish@lists.debian.org>\n"
++"Language: sv\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=utf-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Poedit-Language: Swedish\n"
++"X-Poedit-Country: Sweden\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Ska adjtimex köras vid installation och vid varje uppstart?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"adjtimex kan köra vid systemets uppstart för att sätta kärntidsparametrar "
++"till värdena i /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Aktivera inte denna funktion om du endast vill använda adjtime för att "
++"inspektera aktuella parameterar."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"Ska adjtimexconfig köras efter installation eller uppgradering av adjtimex?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Skriptet adjtimexconfig kommer att använda adjtimex för att hitta värden för "
++"kärnvariablerna \"tick\" och \"frequency\" som gör att systemklockan kommer "
++"överens med hårdvaruklockan (också kallad CMOS-klockan).  Den sparar sedan "
++"dessa värden i konfigurationsfilen /etc/default/adjtimex så att "
++"inställningarna kommer att användas vid varje uppstart, när /etc/init.d/"
++"adjtimex körs."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Skriptet tar 70 sekunder att köra vilket innebär att det kan vara slöseri "
++"med tid att köra vid varje uppgradering. Alternativt kan du köra "
++"adjtimexconfig själv när det behövs eller bestämma variabler för kärnan på "
++"andra sätt och ange dessa i /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/POTFILES.in
++++ adjtimex-1.29/debian/po/POTFILES.in
+@@ -0,0 +1 @@
++[type: gettext/rfc822deb] templates
+--- adjtimex-1.29.orig/debian/po/pt.po
++++ adjtimex-1.29/debian/po/pt.po
+@@ -0,0 +1,83 @@
++# 2005-10-27 - Marco Ferra <mferra@sdf.lonestar.org> (initial translation)
++# 2009, Carlos Lisboa <carloslisboa@gmail.com>
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.20-5\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-15 22:00+0100\n"
++"Last-Translator: Carlos Lisboa <carloslisboa@gmail.com>\n"
++"Language-Team: Portuguese <traduz@debianpt.org>\n"
++"Language: pt\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Deve o adjtimex correr enquanto o instala e depois sempre que o sistema "
++"inicia?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Correr o adjtimex no arranque do sistema irá colocar os parâmetros de tempo "
++"do kernel para os valores em /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Não deve escolher esta opção se apenas deseja usar o adjtimex para verificar "
++"os parâmetros actuais."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Correr o adjtimexconfig quando o adjtimex é instalado ou actualizado?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"O script adjtimexconfig irá usar adjtimex para encontrar valores para as "
++"variáveis do kernel \"tick\" e \"frequency\" que irão tornar o relógio do "
++"sistema em concordância com o relógio de hardware (também conhecido por "
++"relógio CMOS). Irá então guardar os valores no ficheiro de configuração /etc/"
++"default/adjtimex para que as configurações sejam restauradas em cada "
++"arranque, quando o /etc/init.d/adjtimex é corrido."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Este script demora 70 segundos a correr, podendo ser um desperdício de tempo "
++"corrê-lo em cada actualização. Como alternativa, pode correr o "
++"adjtimexconfig manualmente quando necessário, ou determine as variáveis do "
++"kernel usando outro método e configure-as manualmente em /etc/default/"
++"adjtimex."
+--- adjtimex-1.29.orig/debian/po/de.po
++++ adjtimex-1.29/debian/po/de.po
+@@ -0,0 +1,96 @@
++# translation of adjtimex_1.26-3_de.po to German
++#
++#    Translators, if you are not familiar with the PO format, gettext
++#    documentation is worth reading, especially sections dedicated to
++#    this format, e.g. by running:
++#         info -n '(gettext)PO Files'
++#         info -n '(gettext)Header Entry'
++#    Some information specific to po-debconf are available at
++#            /usr/share/doc/po-debconf/README-trans
++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
++#    Developers do not need to manually edit POT or PO files.
++#
++# Erik Schanze <eriks@debian.org>, 2004-2009.
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex_1.26-3_de\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-15 18:02+0200\n"
++"Last-Translator: Erik Schanze <eriks@debian.org>\n"
++"Language-Team: German <debian-l10n-german@lists.debian.org>\n"
++"Language: de\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Soll Adjtimex nach der Installation und bei jedem Hochfahren gestartet "
++"werden?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Wird Adjtimex beim Hochfahren des Systems gestartet, werden die "
++"Zeitparameter im Kernel auf die Werte in /etc/defaults/adjtimex gesetzt."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Stimmen Sie nicht zu, wenn Sie mit Adjtimex nur die aktuellen Parameter "
++"ermitteln wollen."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"Adjtimexconfig zur Installation oder Aktualisierung von Adjtimex aufrufen?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Das Skript »adjtimexconfig« nutzt Adjtimex, um die Werte der Kernelvariablen "
++"»tick« und »frequency« zu finden, damit die Systemuhr ungefähr mit der "
++"Rechneruhr (auch bekannt als CMOS-Uhr) übereinstimmt. Das Skript speichert "
++"diese Werte in der Konfigurationsdatei /etc/default/adjtimex, sodass die "
++"Einstellung bei jedem Systemstart wiederhergestellt wird, wenn /etc/init.d/"
++"adjtimex ausgeführt wird."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Das Skript benötigt 70 Sekunden, um durchzulaufen, es bei jeder "
++"Aktualisierung laufen zu lassen, dürfte Zeitverschwendung sein. Andererseits "
++"können Sie »adjtimexconfig« selbst bei Bedarf starten oder Sie finden die "
++"Kernelvariablen auf einem anderen Weg heraus (siehe Handbuchseite von "
++"Adjtimex) und speichern die Werte in der Datei /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/eu.po
++++ adjtimex-1.29/debian/po/eu.po
+@@ -0,0 +1,84 @@
++# translation of adjtimex-eu.po to Euskara
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++#
++# Piarres Beobide <pi@beobide.net>, 2009.
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex-eu\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-08 12:49+0200\n"
++"Last-Translator: Piarres Beobide <pi@beobide.net>\n"
++"Language-Team: Euskara <debian-l10n-basque@lists.debian.org>\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Adjtimex instalazio eta abiarazte bakoitzean exekutatu behar al da?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Adjtimex sistema abiaraztean exekutatzean kernelaren denbora parametroak /"
++"etc/default/adjtimex-eko balioetara ezarriko dira."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Ez zenuke aukera hau aukeratu beharko adjtimex uneko parametroak begiratzeko "
++"bakarrik erabili nahi baduzu."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Adjtimexconfig exekutatu adjtimex instalatu edo bertsio-berritzean?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Adjtimexconfig script-ak adjtimex erabiliko du kerneleko  \"tick\" eta "
++"\"frequency\" aldagaien balioa aurkitzeko honekin sistema erlojuak hardware "
++"erlojuarekin (CMOS ordularia bezala ere ezagutua) bat egingo du. Orduan "
++"balio hauek /etc/default/adjtimex konfigurazio fitxategian gordeko ditu Abio "
++"bakoitzean balio horiek berrezarri daitezen /etc/init.d/adjtimex "
++"exekutatzean."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Script-ak 70 segundu behar ditu exekutatzeko, beraz berau bertsio-berritze "
++"bakoitzean exekutatzea denbora galtze bat izan daiteke. Bestela behar "
++"duzunean adjtimexconfig eskuz konfiguratu dezakezu edo kernel aldagaiak "
++"beste metodo batez atzeman eta /etc/default/adjtimex fitxategian eskuz ipini "
++"ditzakezu."
+--- adjtimex-1.29.orig/debian/po/da.po
++++ adjtimex-1.29/debian/po/da.po
+@@ -0,0 +1,92 @@
++# translation of adjtimex_1.16-1-da.po to Danish
++# translation of adjtimex_1.16-1_templates.po to Danish
++#
++#    Translators, if you are not familiar with the PO format, gettext
++#    documentation is worth reading, especially sections dedicated to
++#    this format, e.g. by running:
++#         info -n '(gettext)PO Files'
++#         info -n '(gettext)Header Entry'
++#    Some information specific to po-debconf are available at
++#            /usr/share/doc/po-debconf/README-trans
++#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
++#    Developers do not need to manually edit POT or PO files.
++# Claus Hindsgaul <claus_h@image.dk>, 2004.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex_1.16-1-da\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-04-16 16:56+0200\n"
++"Last-Translator: Frank Damgaard <debian@overbygaard.dk>\n"
++"Language-Team: Danish\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.3.1\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Skal adjtimex køres under installation og ved hver opstart?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Køres adjtimex under opstart af systemet, sættes kernens tidsparametre til "
++"værdierne i /etc/default/adjtimex. "
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Vælg ikke dette hvis du ønsker at bruge adjtimex til at gemmense de aktuelle "
++"parametre."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Skal adjtimexconfig køres ved installation eller opgradering?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Skriptet adjtimexconfig vil bruge adjtimex til at finde de værdier til "
++"kernevariablene \"tick\" og \"frequency\", der vil få systemuret til at "
++"passe med computerens indbyggede ur (CMOS-uret). Den gemmer derefter "
++"værdierne i opsætningsfilen /etc/default/edjtimex, så indstillingerne bliver "
++"sat under hver opstart, når skriptet /etC/init.d/adjtimex køres."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Det tager 70 sekunder at køre skriptet, så at køre skriptet ved hver "
++"opgradering kan være spild af tid. Alternativt kan du selv køre "
++"adjtimexconfig når der er behov, eller finde kernevariablene på en anden "
++"måde og sætte dem manuelt i /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/nl.po
++++ adjtimex-1.29/debian/po/nl.po
+@@ -0,0 +1,86 @@
++# Dutch translation of adjtimex debconf templates.
++# Copyright (C) 2003-2011 THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the adjtimex package.
++# Michiel Sikkes <michiel@sikkes.xs4all.nl>, 2003.
++# Jeroen Schot <schot@a-eskwadraat.nl>, 2011.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex_1.29-2.1\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2011-05-05 17:49+0200\n"
++"Last-Translator: Michiel Sikkes <michiel@sikkes.xs4all.nl>\n"
++"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
++"Language: nl\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr ""
++"Wilt u dat adjtimex bij de installatie en bij elke opstartprocedure gedraaid "
++"wordt?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Het draaien van adjtimex bij het opstarten van het systeem zal "
++"tijdparameters van de kernel instellen zoals gedefinieerd in /etc/default/"
++"adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Accepteer deze optie niet als u adjtimex alleen wilt gebruiken om de huidige "
++"parameters te bekijken."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr ""
++"Wilt u dat adjtimexconfig bij het installeren en opwaarderen wordt gedraaid?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Het adjtimexconfig-script zal adjtimex gebruiken om de eigenschappen voor de "
++"kernelvariabelen \"tick\" en \"frequency\" te vinden. Dit zal er voor zorgen "
++"dat de systeemklok gelijk loopt met de hardware-klok (ook bekend onder de "
++"naam CMOS-klok). Deze eigenschappen worden opgeslagen in het "
++"configuratiebestand /etc/default/adjtimex, dus de instellingen worden bij "
++"elke systeemopstartprocedure hersteld als /etc/init.d/adjtimex draait."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Het script doet er 70 seconden over om te draaien. Als alternatief kunt u "
++"adjtimexconfig later handmatig draaien, of de kernelvariabelen op een andere "
++"manier bepalen en deze zelf in /etc/default/adjtimex zetten."
+--- adjtimex-1.29.orig/debian/po/cs.po
++++ adjtimex-1.29/debian/po/cs.po
+@@ -0,0 +1,78 @@
++# Czech translation of adjtimex templates
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.29-2\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2010-07-16 14:53+0200\n"
++"Last-Translator: Martin Sin <martin.sin@zshk.cz>\n"
++"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
++"Language: cs\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=utf-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "Má být adjtimex spuštěn po instalaci a při každém spuštění po�íta�e?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Spuštění adjtimex při startu po�íta�e nastaví �asové parametry jádra na "
++"hodnoty uložené v /etc/default/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"Pokud chcete používat adjtimex pouze ke zjištění aktuálních hodnot, pak tuto "
++"možnost nemusíte používat."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "Spustit adjtimexconfig po instalaci nebo aktualizaci adjtimex?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"Skript adjtimexconfig použije adjtimex k nalezení hodnot „tick“ a "
++"„frequency“ jádra tak, že nastaví systémové hodiny přibližně na hodnoty těch "
++"hardwarových (také známých jako CMOS hodiny). Tyto hodnoty pak uloží do "
++"konfigura�ního souboru /etc/default/adjtimex, aby mohlo být nastavení "
++"obnoveno při každém startu, vždy při spuštění /etc/init.d/adjtimex."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"Spuštění skriptu zabere 70 sekund, takže jeho spuštění při každé aktualizaci "
++"může být ztrátou �asu. Volitelně můžete adjtimexconfig spustit podle potřeby "
++"také ru�ně nebo ur�it proměnné jádra jinými způsoby a nastavit je ru�ně v "
++"souboru /etc/default/adjtimex."
+--- adjtimex-1.29.orig/debian/po/es.po
++++ adjtimex-1.29/debian/po/es.po
+@@ -0,0 +1,108 @@
++# adjtimex po-debconf translation to Spanish
++# Copyright (C) 2009 Software in the Public Interest
++# This file is distributed under the same license as the adjtimex package.
++#
++# Changes:
++#   - Initial translation
++#       Vicente H. <vherrerv@supercable.es>
++#
++#   - Updates
++#       Francisco Javier Cuadrado <fcocuadrado@gmail.com>, 2009
++#
++# Traductores, si no conocen el formato PO, merece la pena leer la
++# documentación de gettext, especialmente las secciones dedicadas a este
++# formato, por ejemplo ejecutando:
++#       info -n '(gettext)PO Files'
++#       info -n '(gettext)Header Entry'
++#
++# Equipo de traducción al español, por favor lean antes de traducir
++# los siguientes documentos:
++#
++#   - El proyecto de traducción de Debian al español
++#     http://www.debian.org/intl/spanish/coordinacion
++#     especialmente las notas de traducción en
++#     http://www.debian.org/intl/spanish/notas
++#
++#   - La guía de traducción de po's de debconf:
++#     /usr/share/doc/po-debconf/README-trans
++#     o http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: adjtimex 1.27.1-3\n"
++"Report-Msgid-Bugs-To: adjtimex@packages.debian.org\n"
++"POT-Creation-Date: 2009-03-17 07:38+0100\n"
++"PO-Revision-Date: 2009-07-25 20:18+0100\n"
++"Last-Translator: Francisco Javier Cuadrado <fcocuadrado@gmail.com>\n"
++"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
++"Language: \n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should adjtimex be run at installation and at every startup?"
++msgstr "¿Se debe ejecutar adjtimex ahora y en cada arranque?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"Running adjtimex at system startup will set the kernel time parameters to "
++"the values in /etc/default/adjtimex."
++msgstr ""
++"Ejecutar adjtimex al inicio del sistema configurará los parámetros de tiempo "
++"del núcleo a los valores del archivo «/etc/default/adjtimex»."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You should not choose this option if you just want to use adjtimex to "
++"inspect the current parameters."
++msgstr ""
++"No debería escoger esta opción si sólo quiere utilizar adjtimex para "
++"inspeccionar los parámetros actuales."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid "Run adjtimexconfig when adjtimex is installed or upgraded?"
++msgstr "¿Desea ejecutar adjtimexconfig cuando adjtimex se instale o actualice?"
++
++#. Type: boolean
++#. Description
++#. Translators: do not translate "tick" and "frequency"
++#: ../templates:3001
++msgid ""
++"The adjtimexconfig script will use adjtimex to find values for the kernel "
++"variables \"tick\" and \"frequency\" that will make the system clock "
++"approximately agree with the hardware clock (also known as the CMOS clock).  "
++"It then saves these values in the configuration file /etc/default/adjtimex "
++"so the settings will be restored on every boot, when /etc/init.d/adjtimex "
++"runs."
++msgstr ""
++"El script adjtimexconfig utilizará adjtimex para encontrar los valores de "
++"las variables «tick» y «frecuency» del núcleo que harán que el reloj del "
++"sistema concuerde aproximadamente con el reloj del hardware (también "
++"conocido como reloj CMOS). Entonces, se guardan estos valores en el archivo "
++"de configuración «/etc/default/adjtimex» de modo que los valores se "
++"restaurarán en cada arranque, cuando el script «/etc/init.d/adjtimex» se "
++"ejecute."
++
++#. Type: boolean
++#. Description
++#: ../templates:3001
++msgid ""
++"The script takes 70 seconds to run, so running it for every upgrade may be a "
++"waste of time. Alternatively, you can run adjtimexconfig manually when "
++"needed, or determine the kernel variables by using other methods and set "
++"them manually in /etc/default/adjtimex."
++msgstr ""
++"El script tarda 70 segundos para ejecutarse, por lo que ejecutarlo en cada "
++"actualización puede ser una pérdida de tiempo. De forma alternativa, puede "
++"ejecutar manualmente ajdtimexconfig cuando lo necesite, o determinar las "
++"variables del núcleo utilizando otros métodos e configurándolas en el "
++"archivo «/etc/default/adjtimex»."
diff --git a/source/a/util-linux/column-fix_long_opts.diff b/source/a/util-linux/column-fix_long_opts.diff
new file mode 100644
index 00000000..e5215db7
--- /dev/null
+++ b/source/a/util-linux/column-fix_long_opts.diff
@@ -0,0 +1,15 @@
+diff -Naur util-linux-2.21.2/text-utils/column.c util-linux-2.21.2.patched//text-utils/column.c
+--- util-linux-2.21.2/text-utils/column.c	2012-05-25 05:44:59.000000000 -0400
++++ util-linux-2.21.2.patched//text-utils/column.c	2012-08-14 05:22:17.000000000 -0400
+@@ -121,9 +121,9 @@
+ 	{
+ 		{ "help",	0, 0, 'h' },
+ 		{ "version",    0, 0, 'V' },
+-		{ "columns",	0, 0, 'c' },
++		{ "columns",	1, 0, 'c' },
+ 		{ "table",	0, 0, 't' },
+-		{ "separator",	0, 0, 's' },
++		{ "separator",	1, 0, 's' },
+ 		{ "fillrows",	0, 0, 'x' },
+ 		{ NULL,		0, 0, 0 },
+ 	};
diff --git a/source/a/util-linux/net-tools.config.h b/source/a/util-linux/net-tools.config.h
new file mode 100644
index 00000000..e271f863
--- /dev/null
+++ b/source/a/util-linux/net-tools.config.h
@@ -0,0 +1,78 @@
+/*
+* config.h	Automatically generated configuration includefile
+*
+* NET-TOOLS	A collection of programs that form the base set of the
+*		NET-3 Networking Distribution for the LINUX operating
+*		system.
+*
+*		DO  NOT  EDIT  DIRECTLY
+*
+*/
+
+/* 
+ * 
+ * Internationalization
+ * 
+ * The net-tools package has currently been translated to French,
+ * German and Brazilian Portugese.  Other translations are, of
+ * course, welcome.  Answer `n' here if you have no support for
+ * internationalization on your system.
+ * 
+ */
+#define I18N 1
+
+/* 
+ * 
+ * Protocol Families.
+ * 
+ */
+#define HAVE_AFUNIX 1
+#define HAVE_AFINET 1
+#define HAVE_AFINET6 1
+#define HAVE_AFIPX 1
+#define HAVE_AFATALK 1
+#define HAVE_AFAX25 1
+#define HAVE_AFNETROM 1
+#define HAVE_AFROSE 0
+#define HAVE_AFX25 1
+#define HAVE_AFECONET 0
+#define HAVE_AFDECnet 0
+#define HAVE_AFASH 0
+#define HAVE_AFBLUETOOTH 1
+
+/* 
+ * 
+ * Device Hardware types.
+ * 
+ */
+#define HAVE_HWETHER 1
+#define HAVE_HWARC 1
+#define HAVE_HWSLIP 1
+#define HAVE_HWPPP 1
+#define HAVE_HWTUNNEL 1
+#define HAVE_HWSTRIP 1
+#define HAVE_HWTR 1
+#define HAVE_HWAX25 1
+#define HAVE_HWROSE 0
+#define HAVE_HWNETROM 1
+#define HAVE_HWX25 1
+#define HAVE_HWFR 1
+#define HAVE_HWSIT 0
+#define HAVE_HWFDDI 1
+#define HAVE_HWHIPPI 1
+#define HAVE_HWASH 0
+#define HAVE_HWHDLCLAPB 0
+#define HAVE_HWIRDA 1
+#define HAVE_HWEC 0
+#define HAVE_HWEUI64 1
+#define HAVE_HWIB 1
+
+/* 
+ * 
+ * Other Features.
+ * 
+ */
+#define HAVE_FW_MASQUERADE 1
+#define HAVE_IP_TOOLS 1
+#define HAVE_MII 1
+#define HAVE_SELINUX 0
diff --git a/source/a/util-linux/net-tools.diff b/source/a/util-linux/net-tools.diff
deleted file mode 100644
index a19af202..00000000
--- a/source/a/util-linux/net-tools.diff
+++ /dev/null
@@ -1,77 +0,0 @@
---- ./config.h.orig	Wed Mar 21 21:23:31 2001
-+++ ./config.h	Wed Mar 21 21:23:12 2001
-@@ -0,0 +1,74 @@
-+/*
-+* config.h	Automatically generated configuration includefile
-+*
-+* NET-TOOLS	A collection of programs that form the base set of the
-+*		NET-3 Networking Distribution for the LINUX operating
-+*		system.
-+*
-+*		DO  NOT  EDIT  DIRECTLY
-+*
-+*/
-+
-+/* 
-+ * 
-+ * Internationalization
-+ * 
-+ * The net-tools package has currently been translated to French,
-+ * German and Brazilian Portugese.  Other translations are, of
-+ * course, welcome.  Answer `n' here if you have no support for
-+ * internationalization on your system.
-+ * 
-+ */
-+#define I18N 1
-+
-+/* 
-+ * 
-+ * Protocol Families.
-+ * 
-+ */
-+#define HAVE_AFUNIX 1
-+#define HAVE_AFINET 1
-+#define HAVE_AFINET6 1
-+#define HAVE_AFIPX 1
-+#define HAVE_AFATALK 1
-+#define HAVE_AFAX25 1
-+#define HAVE_AFNETROM 1
-+#define HAVE_AFROSE 0
-+#define HAVE_AFX25 1
-+#define HAVE_AFECONET 0
-+#define HAVE_AFDECnet 0
-+#define HAVE_AFASH 0
-+
-+/* 
-+ * 
-+ * Device Hardware types.
-+ * 
-+ */
-+#define HAVE_HWETHER 1
-+#define HAVE_HWARC 1
-+#define HAVE_HWSLIP 1
-+#define HAVE_HWPPP 1
-+#define HAVE_HWTUNNEL 1
-+#define HAVE_HWSTRIP 1
-+#define HAVE_HWTR 1
-+#define HAVE_HWAX25 1
-+#define HAVE_HWROSE 0
-+#define HAVE_HWNETROM 1
-+#define HAVE_HWX25 1
-+#define HAVE_HWFR 1
-+#define HAVE_HWSIT 0
-+#define HAVE_HWFDDI 0
-+#define HAVE_HWHIPPI 0
-+#define HAVE_HWASH 0
-+#define HAVE_HWHDLCLAPB 0
-+#define HAVE_HWIRDA 1
-+#define HAVE_HWEC 0
-+
-+/* 
-+ * 
-+ * Other Features.
-+ * 
-+ */
-+#define HAVE_FW_MASQUERADE 1
-+#define HAVE_IP_TOOLS 1
-+#define HAVE_MII 1
diff --git a/source/a/util-linux/net-tools_1.60-19.diff b/source/a/util-linux/net-tools_1.60-19.diff
deleted file mode 100644
index f754f02d..00000000
--- a/source/a/util-linux/net-tools_1.60-19.diff
+++ /dev/null
@@ -1,29401 +0,0 @@
---- net-tools-1.60.orig/lib/ether.c
-+++ net-tools-1.60/lib/ether.c
-@@ -2,7 +2,7 @@
-  * lib/ether.c        This file contains an implementation of the "Ethernet"
-  *              support functions.
-  *
-- * Version:     $Id: ether.c,v 1.7 1999/09/27 11:00:47 philip Exp $
-+ * Version:     $Id: ether.c,v 1.8 2002/07/30 05:17:29 ecki Exp $
-  *
-  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-  *              Copyright 1993 MicroWalt Corporation
-@@ -39,7 +39,7 @@
- {
-     static char buff[64];
- 
--    snprintf(buff, sizeof(buff), "%02X:%02X:%02X:%02X:%02X:%02X",
-+    snprintf(buff, sizeof(buff), "%02x:%02x:%02x:%02x:%02x:%02x",
- 	     (ptr[0] & 0377), (ptr[1] & 0377), (ptr[2] & 0377),
- 	     (ptr[3] & 0377), (ptr[4] & 0377), (ptr[5] & 0377)
- 	);
---- net-tools-1.60.orig/lib/inet6.c
-+++ net-tools-1.60/lib/inet6.c
-@@ -3,7 +3,7 @@
-  *              support functions for the net-tools.
-  *              (most of it copied from lib/inet.c 1.26).
-  *
-- * Version:     $Id: inet6.c,v 1.10 2000/10/28 11:04:00 pb Exp $
-+ * Version:     $Id: inet6.c,v 1.12 2002/12/10 01:03:09 ecki Exp $
-  *
-  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-  *              Copyright 1993 MicroWalt Corporation
-@@ -44,6 +44,21 @@
- 
- extern int h_errno;		/* some netdb.h versions don't export this */
- 
-+char * fix_v4_address(char *buf, struct in6_addr *in6) 
-+{ 
-+	if (IN6_IS_ADDR_V4MAPPED(in6->s6_addr)) { 
-+			char *s =strchr(buf, '.'); 
-+			if (s) { 
-+				while (s > buf && *s != ':')
-+					--s;
-+				if (*s == ':') ++s; 	
-+				else s = NULL; 
-+			} 	
-+			if (s) return s;
-+	} 
-+	return buf; 
-+} 
-+
- static int INET6_resolve(char *name, struct sockaddr_in6 *sin6)
- {
-     struct addrinfo req, *ai;
-@@ -83,14 +98,14 @@
- 	return (-1);
-     }
-     if (numeric & 0x7FFF) {
--	inet_ntop(AF_INET6, &sin6->sin6_addr, name, 80);
-+	inet_ntop( AF_INET6, &sin6->sin6_addr, name, 80);
- 	return (0);
-     }
-     if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
-         if (numeric & 0x8000)
- 	    strcpy(name, "default");
- 	else
--	    strcpy(name, "*");
-+	    strcpy(name, "[::]");
- 	return (0);
-     }
- 
-@@ -109,13 +124,14 @@
- }
- 
- 
-+
- /* Display an Internet socket address. */
- static char *INET6_print(unsigned char *ptr)
- {
-     static char name[80];
- 
-     inet_ntop(AF_INET6, (struct in6_addr *) ptr, name, 80);
--    return name;
-+	return fix_v4_address(name, (struct in6_addr *)ptr);
- }
- 
- 
-@@ -129,13 +145,14 @@
- 	return safe_strncpy(buff, _("[NONE SET]"), sizeof(buff));
-     if (INET6_rresolve(buff, (struct sockaddr_in6 *) sap, numeric) != 0)
- 	return safe_strncpy(buff, _("[UNKNOWN]"), sizeof(buff));
--    return (buff);
-+    return (fix_v4_address(buff, &((struct sockaddr_in6 *)sap)->sin6_addr));
- }
- 
- 
- static int INET6_getsock(char *bufp, struct sockaddr *sap)
- {
-     struct sockaddr_in6 *sin6;
-+	char *p;
- 
-     sin6 = (struct sockaddr_in6 *) sap;
-     sin6->sin6_family = AF_INET6;
-@@ -143,7 +160,9 @@
- 
-     if (inet_pton(AF_INET6, bufp, sin6->sin6_addr.s6_addr) <= 0)
- 	return (-1);
--
-+	p = fix_v4_address(bufp, &sin6->sin6_addr);
-+	if (p != bufp) 
-+		memcpy(bufp, p, strlen(p)+1); 
-     return 16;			/* ?;) */
- }
- 
---- net-tools-1.60.orig/lib/inet6_gr.c
-+++ net-tools-1.60/lib/inet6_gr.c
-@@ -1,4 +1,4 @@
--/*
-+ /*
-    Modifications:
-    1998-07-01 - Arnaldo Carvalho de Melo - GNU gettext instead of catgets,
-    snprintf instead of sprintf
-@@ -71,11 +71,15 @@
-         printf(_("INET6 (IPv6) not configured in this system.\n"));
- 	return 1;
-     }
--    printf(_("Kernel IPv6 routing table\n"));
- 
--    printf(_("Destination                                 "
--	     "Next Hop                                "
--	     "Flags Metric Ref    Use Iface\n"));
-+    if (numeric & RTF_CACHE)
-+    	printf(_("Kernel IPv6 routing cache\n"));
-+    else
-+    	printf(_("Kernel IPv6 routing table\n"));
-+
-+    printf(_("Destination                    "
-+	     "Next Hop                   "
-+	     "Flag Met Ref Use If\n"));
- 
-     while (fgets(buff, 1023, fp)) {
- 	num = sscanf(buff, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %08x %08x %08x %08x %s\n",
-@@ -87,13 +91,19 @@
- 		     &slen,
- 		     naddr6p[0], naddr6p[1], naddr6p[2], naddr6p[3],
- 		     naddr6p[4], naddr6p[5], naddr6p[6], naddr6p[7],
--		     &metric, &use, &refcnt, &iflags, iface);
-+		     &metric, &refcnt, &use, &iflags, iface);
- #if 0
- 	if (num < 23)
- 	    continue;
- #endif
--	if (!(iflags & RTF_UP))
--	    continue;
-+	if (iflags & RTF_CACHE) {
-+		if (!(numeric & RTF_CACHE))
-+			continue;
-+	} else {
-+		if (numeric & RTF_CACHE)
-+			continue;
-+	}
-+			
- 	/* Fetch and resolve the target address. */
- 	snprintf(addr6, sizeof(addr6), "%s:%s:%s:%s:%s:%s:%s:%s",
- 		 addr6p[0], addr6p[1], addr6p[2], addr6p[3],
-@@ -112,7 +122,12 @@
- 		 inet6_aftype.sprint((struct sockaddr *) &snaddr6, 1));
- 
- 	/* Decode the flags. */
--	strcpy(flags, "U");
-+
-+	flags[0]=0;
-+	if (iflags & RTF_UP)
-+	    strcat(flags, "U");
-+	if (iflags & RTF_REJECT)
-+	    strcat(flags, "!");
- 	if (iflags & RTF_GATEWAY)
- 	    strcat(flags, "G");
- 	if (iflags & RTF_HOST)
-@@ -123,9 +138,19 @@
- 	    strcat(flags, "A");
- 	if (iflags & RTF_CACHE)
- 	    strcat(flags, "C");
-+	if (iflags & RTF_ALLONLINK)
-+	    strcat(flags, "a");
-+	if (iflags & RTF_EXPIRES)
-+	    strcat(flags, "e");
-+	if (iflags & RTF_MODIFIED)
-+	    strcat(flags, "m");
-+	if (iflags & RTF_NONEXTHOP)
-+	    strcat(flags, "n");
-+	if (iflags & RTF_FLOW)
-+	    strcat(flags, "f");
- 
- 	/* Print the info. */
--	printf("%-43s %-39s %-5s %-6d %-2d %7d %-8s\n",
-+	printf("%-30s %-26s %-4s %-3d %-1d%6d %s\n",
- 	       addr6, naddr6, flags, metric, refcnt, use, iface);
-     }
- 
-@@ -144,8 +169,7 @@
-     char addr6p[8][5], haddrp[6][3];
- 
-     if (!fp) {
--	ESYSNOT("nd_print", "ND Table");
--	return 1;
-+	return rprint_fib6(ext, numeric | RTF_CACHE);
-     }
-     printf(_("Kernel IPv6 Neighbour Cache\n"));
- 
---- net-tools-1.60.orig/lib/ipx_gr.c
-+++ net-tools-1.60/lib/ipx_gr.c
-@@ -38,21 +38,27 @@
-     char net[128], router_net[128];
-     char router_node[128];
-     int num;
--    FILE *fp = fopen(_PATH_PROCNET_IPX_ROUTE, "r");
-+    FILE *fp;
-     struct aftype *ap;
-     struct sockaddr sa;
- 
--    if ((ap = get_afntype(AF_IPX)) == NULL) {
--	EINTERN("lib/ipx_rt.c", "AF_IPX missing");
--	return (-1);
--    }
-+    fp = fopen(_PATH_PROCNET_IPX_ROUTE1, "r");
- 
-     if (!fp) {
--        perror(_PATH_PROCNET_IPX_ROUTE);
--        printf(_("IPX not configured in this system.\n"));
-+        fp = fopen(_PATH_PROCNET_IPX_ROUTE2, "r");
-+    }
-+    
-+    if (!fp) {
-+        perror(NULL);
-+        printf(_("IPX routing not in file %s or %s found.\n"), _PATH_PROCNET_IPX_ROUTE1, _PATH_PROCNET_IPX_ROUTE2);
- 	return 1;
-     }
- 
-+    if ((ap = get_afntype(AF_IPX)) == NULL) {
-+	EINTERN("lib/ipx_rt.c", "AF_IPX missing");
-+	return (-1);
-+    }
-+
-     printf(_("Kernel IPX routing table\n"));	/* xxx */
-     printf(_("Destination               Router Net                Router Node\n"));
- 
---- net-tools-1.60.orig/lib/proc.c
-+++ net-tools-1.60/lib/proc.c
-@@ -1,11 +1,12 @@
- /* Tolerant /proc file parser. Copyright 1998 Andi Kleen */
--/* $Id: proc.c,v 1.4 1999/01/05 20:54:00 philip Exp $ */ 
-+/* $Id: proc.c,v 1.5 2007/12/01 18:44:57 ecki Exp $ */ 
- /* Fixme: cannot currently cope with removed fields */ 
- 
- #include <string.h>
- #include <stdarg.h>
- #include <stdio.h>
- #include <ctype.h>
-+#include <unistd.h>
- 
- /* Caller must free return string. */
- 
-@@ -72,3 +73,22 @@
-     va_end(ap);
-     return flag;
- }
-+
-+
-+FILE *proc_fopen(const char *name)
-+{
-+    static char *buffer;
-+    static size_t pagesz;
-+    FILE *fd = fopen(name, "r");
-+
-+    if (fd == NULL)
-+      return NULL;
-+      
-+    if (!buffer) {
-+      pagesz = getpagesize();
-+      buffer = malloc(pagesz);
-+    }
-+    
-+    setvbuf(fd, buffer, _IOFBF, pagesz);
-+    return fd;
-+}
---- net-tools-1.60.orig/lib/proc.h
-+++ net-tools-1.60/lib/proc.h
-@@ -1,5 +1,7 @@
--
--
--/* Generate a suitable scanf format for a column title line */
-+/* 
-+ * prototypes for proc.c
-+ */
- char *proc_gen_fmt(char *name, int more, FILE * fh,...);
- int   proc_guess_fmt(char *name, FILE* fh,...);
-+FILE *proc_fopen(const char *name);
-+
---- net-tools-1.60.orig/lib/util-ank.c
-+++ net-tools-1.60/lib/util-ank.c
-@@ -293,7 +293,7 @@
- 	return 0;
- }
- 
--const char *format_host(int af, void *addr, __u8 *abuf, int alen)
-+const char *format_host(int af, void *addr, char *abuf, int alen)
- {
- #ifdef RESOLVE_HOSTNAMES
- 	if (resolve_hosts) {
---- net-tools-1.60.orig/lib/Makefile
-+++ net-tools-1.60/lib/Makefile
-@@ -16,7 +16,7 @@
- #
- 
- 
--HWOBJS	 = hw.o loopback.o slip.o ether.o ax25.o ppp.o arcnet.o tr.o tunnel.o frame.o sit.o rose.o ash.o fddi.o hippi.o hdlclapb.o strip.o irda.o ec_hw.o x25.o
-+HWOBJS	 = hw.o loopback.o slip.o ether.o ax25.o ppp.o arcnet.o tr.o tunnel.o frame.o sit.o rose.o ash.o fddi.o hippi.o hdlclapb.o strip.o irda.o ec_hw.o x25.o eui64.o
- AFOBJS	 = unix.o inet.o inet6.o ax25.o ipx.o ddp.o ipx.o netrom.o af.o rose.o econet.o x25.o
- AFGROBJS = inet_gr.o inet6_gr.o ipx_gr.o ddp_gr.o netrom_gr.o ax25_gr.o rose_gr.o getroute.o x25_gr.o
- AFSROBJS = inet_sr.o inet6_sr.o netrom_sr.o ipx_sr.o setroute.o x25_sr.o
---- net-tools-1.60.orig/lib/ddp_gr.c
-+++ net-tools-1.60/lib/ddp_gr.c
-@@ -1,3 +1,20 @@
-+/*
-+ * lib/ddp_gr.c         Prinbting of DDP (AppleTalk) routing table
-+ *                      used by the NET-LIB.
-+ *
-+ * NET-LIB      
-+ *
-+ * Version:     $Id: ddp_gr.c,v 1.4 2002/06/02 05:25:15 ecki Exp $
-+ *
-+ * Author:      Ajax <ajax@firest0rm.org>
-+ *
-+ * Modification:
-+ *  2002-06-02 integrated into main source by Bernd Eckenfels
-+ *
-+ */
-+
-+/* TODO: name lookups (/etc/atalk.names?  NBP?) */
-+
- #include "config.h"
- 
- #if HAVE_AFATALK
-@@ -16,9 +33,61 @@
- #include "pathnames.h"
- #include "intl.h"
- 
-+/* stolen from inet_gr.c */
-+#define flags_decode(i,o) do {                  \
-+        o[0] = '\0';                            \
-+        if (i & RTF_UP) strcat(o, "U");         \
-+        if (i & RTF_GATEWAY) strcat(o, "G");    \
-+        if (i & RTF_REJECT) strcat(o, "!");     \
-+        if (i & RTF_HOST) strcat(o, "H");       \
-+        if (i & RTF_REINSTATE) strcat(o, "R");  \
-+        if (i & RTF_DYNAMIC) strcat(o, "D");    \
-+        if (i & RTF_MODIFIED) strcat(o, "M");   \
-+        if (i & RTF_DEFAULT) strcat(o, "d");    \
-+        if (i & RTF_ALLONLINK) strcat(o, "a");  \
-+        if (i & RTF_ADDRCONF) strcat(o, "c");   \
-+        if (i & RTF_NONEXTHOP) strcat(o, "o");  \
-+        if (i & RTF_EXPIRES) strcat(o, "e");    \
-+        if (i & RTF_CACHE) strcat(o, "c");      \
-+        if (i & RTF_FLOW) strcat(o, "f");       \
-+        if (i & RTF_POLICY) strcat(o, "p");     \
-+        if (i & RTF_LOCAL) strcat(o, "l");      \
-+        if (i & RTF_MTU) strcat(o, "u");        \
-+        if (i & RTF_WINDOW) strcat(o, "w");     \
-+        if (i & RTF_IRTT) strcat(o, "i");       \
-+        if (i & RTF_NOTCACHED) strcat(o, "n");  \
-+    } while (0)
-+
- int DDP_rprint(int options)
- {
--    fprintf(stderr, _("Routing table for `ddp' not yet supported.\n"));
--    return (1);
-+    FILE *fp;
-+    char *dest, *gw, *dev, *flags;
-+    char oflags[32];
-+    char *hdr = "Destination     Gateway         Device          Flags";
-+
-+    fp = fopen(_PATH_PROCNET_ATALK_ROUTE, "r");
-+
-+    if (!fp) {
-+        perror("Error opening " _PATH_PROCNET_ATALK_ROUTE);
-+        fprintf(stderr, "DDP (AppleTalk) not configured on this system.\n");
-+        return 1;
-+    }
-+
-+    fscanf(fp, "%as %as %as %as\n", &dest, &gw, &flags, &dev);
-+    free(dest); free(gw); free(dev); free(flags);
-+
-+    printf("%s\n", hdr);
-+
-+    while (fscanf(fp, "%as %as %as %as\n", &dest, &gw, &flags, &dev) == 4) {
-+        int iflags = atoi(flags);
-+        flags_decode(iflags, oflags);
-+        printf("%-16s%-16s%-16s%-s\n", dest, gw, dev, oflags);
-+        free(dest); free(gw); free(dev); free(flags);
-+    }
-+
-+    fclose(fp);
-+    
-+    return 0;
-+
- }
- #endif
---- net-tools-1.60.orig/lib/hw.c
-+++ net-tools-1.60/lib/hw.c
-@@ -2,7 +2,7 @@
-  * lib/hw.c   This file contains the top-level part of the hardware
-  *              support functions module.
-  *
-- * Version:     $Id: hw.c,v 1.17 2000/05/20 13:38:10 pb Exp $
-+ * Version:     $Id: hw.c,v 1.18 2001/11/12 02:12:05 ecki Exp $
-  *
-  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-  *
-@@ -73,6 +73,8 @@
- 
- extern struct hwtype ec_hwtype;
- 
-+extern struct hwtype eui64_hwtype;
-+
- static struct hwtype *hwtypes[] =
- {
- 
-@@ -144,6 +146,9 @@
- #if HAVE_HWX25
-     &x25_hwtype,
- #endif
-+#if HAVE_HWEUI64
-+    &eui64_hwtype,
-+#endif
-     &unspec_hwtype,
-     NULL
- };
-@@ -217,6 +222,9 @@
- #if HAVE_HWEC
-     ec_hwtype.title = _("Econet");
- #endif
-+#if HAVE_HWEUI64
-+    eui64_hwtype.title = _("Generic EUI-64");
-+#endif
-     sVhwinit = 1;
- }
- 
---- net-tools-1.60.orig/lib/inet.c
-+++ net-tools-1.60/lib/inet.c
-@@ -3,7 +3,7 @@
-  *              support functions for the net-tools.
-  *              (NET-3 base distribution).
-  *
-- * Version:    $Id: inet.c,v 1.13 1999/12/11 13:35:56 freitag Exp $
-+ * Version:    $Id: inet.c,v 1.14 2003/10/19 11:57:37 pb Exp $
-  *
-  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-  *              Copyright 1993 MicroWalt Corporation
-@@ -144,7 +144,7 @@
-     struct hostent *ent;
-     struct netent *np;
-     struct addr *pn;
--    unsigned long ad, host_ad;
-+    u_int32_t ad, host_ad;
-     int host = 0;
- 
-     /* Grmpf. -FvK */
-@@ -155,7 +155,7 @@
- 	errno = EAFNOSUPPORT;
- 	return (-1);
-     }
--    ad = (unsigned long) sin->sin_addr.s_addr;
-+    ad = sin->sin_addr.s_addr;
- #ifdef DEBUG
-     fprintf (stderr, "rresolve: %08lx, mask %08x, num %08x \n", ad, netmask, numeric);
- #endif
---- net-tools-1.60.orig/lib/inet_sr.c
-+++ net-tools-1.60/lib/inet_sr.c
-@@ -3,6 +3,7 @@
-    1998-07-01 - Arnaldo Carvalho de Melo - GNU gettext instead of catgets
-    1999-10-07 - Kurt Garloff		 - for -host and gws: prefer host names
- 						over networks (or even reject)
-+   2003-10-11 - Maik Broemme		 - gcc 3.x warnign fixes (default: break;)
-  */
- 
- #include "config.h"
-@@ -104,7 +105,6 @@
-        isnet = 1; break;
-     case 2:
-        isnet = 0; break;
--    default:
-     }
- 
-     /* Fill in the other fields. */
---- net-tools-1.60.orig/lib/ipx.c
-+++ net-tools-1.60/lib/ipx.c
-@@ -133,6 +133,9 @@
-     char *ep;
-     int nbo;
- 
-+    if (!sai)
-+    	return (-1);
-+    	
-     sai->sipx_family = AF_IPX;
-     sai->sipx_network = htonl(0);
-     sai->sipx_node[0] = sai->sipx_node[1] = sai->sipx_node[2] =
---- net-tools-1.60.orig/lib/interface.c
-+++ net-tools-1.60/lib/interface.c
-@@ -7,7 +7,7 @@
-    8/2000  Andi Kleen make the list operations a bit more efficient.
-    People are crazy enough to use thousands of aliases now.
- 
--   $Id: interface.c,v 1.14 2001/02/10 19:31:15 pb Exp $
-+   $Id: interface.c,v 1.28 2003/05/29 02:09:14 ecki Exp $
-  */
- 
- #include "config.h"
-@@ -23,6 +23,7 @@
- #include <string.h>
- #include <unistd.h>
- #include <ctype.h>
-+#include <string.h>
- 
- #if HAVE_AFIPX
- #if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)
-@@ -87,14 +88,20 @@
- 
- int ife_short;
- 
-+int if_list_all = 0;	/* do we have requested the complete proc list, yet? */
-+
- static struct interface *int_list, *int_last;
- 
- static int if_readlist_proc(char *);
- 
--static struct interface *add_interface(char *name)
-+static struct interface *if_cache_add(char *name)
- {
-     struct interface *ife, **nextp, *new;
- 
-+    if (!int_list)
-+    	int_last = NULL;
-+
-+    /* the cache is sorted, so if we hit a smaller if, exit */
-     for (ife = int_last; ife; ife = ife->prev) {
- 	    int n = nstrcmp(ife->name, name); 
- 	    if (n == 0) 
-@@ -104,7 +111,7 @@
-     }
-     new(new); 
-     safe_strncpy(new->name, name, IFNAMSIZ); 
--    nextp = ife ? &ife->next : &int_list;
-+    nextp = ife ? &ife->next : &int_list; // keep sorting
-     new->prev = ife;
-     new->next = *nextp; 
-     if (new->next) 
-@@ -117,19 +124,22 @@
- 
- struct interface *lookup_interface(char *name)
- {
--    struct interface *ife = NULL;
--
--    if (if_readlist_proc(name) < 0) 
--	    return NULL; 
--    ife = add_interface(name); 
--    return ife;
-+   /* if we have read all, use it */
-+   if (if_list_all)
-+   	return if_cache_add(name);
-+
-+   /* otherwise we read a limited list */
-+   if (if_readlist_proc(name) < 0)
-+   	return NULL;
-+ 
-+   return if_cache_add(name);
- }
- 
- int for_all_interfaces(int (*doit) (struct interface *, void *), void *cookie)
- {
-     struct interface *ife;
- 
--    if (!int_list && (if_readlist() < 0))
-+    if (!if_list_all && (if_readlist() < 0))
- 	return -1;
-     for (ife = int_list; ife; ife = ife->next) {
- 	int err = doit(ife, cookie);
-@@ -139,13 +149,15 @@
-     return 0;
- }
- 
--int free_interface_list(void)
-+int if_cache_free(void)
- {
-     struct interface *ife;
-     while ((ife = int_list) != NULL) {
- 	int_list = ife->next;
- 	free(ife);
-     }
-+    int_last = NULL;
-+    if_list_all = 0;
-     return 0;
- }
- 
-@@ -180,7 +192,7 @@
- 	}
- 	if (ifc.ifc_len == sizeof(struct ifreq) * numreqs) {
- 	    /* assume it overflowed and try again */
--	    numreqs += 10;
-+	    numreqs *= 2;
- 	    continue;
- 	}
- 	break;
-@@ -188,7 +200,7 @@
- 
-     ifr = ifc.ifc_req;
-     for (n = 0; n < ifc.ifc_len; n += sizeof(struct ifreq)) {
--	add_interface(ifr->ifr_name);
-+	if_cache_add(ifr->ifr_name);
- 	ifr++;
-     }
-     err = 0;
-@@ -198,7 +210,7 @@
-     return err;
- }
- 
--static char *get_name(char *name, char *p)
-+char *get_name(char *name, char *p)
- {
-     while (isspace(*p))
- 	p++;
-@@ -206,16 +218,19 @@
- 	if (isspace(*p))
- 	    break;
- 	if (*p == ':') {	/* could be an alias */
--	    char *dot = p, *dotname = name;
--	    *name++ = *p++;
--	    while (isdigit(*p))
--		*name++ = *p++;
--	    if (*p != ':') {	/* it wasn't, backup */
--		p = dot;
--		name = dotname;
-+		char *dot = p++;
-+ 		while (*p && isdigit(*p)) p++;
-+		if (*p == ':') {
-+			/* Yes it is, backup and copy it. */
-+			p = dot;
-+			*name++ = *p++;
-+			while (*p && isdigit(*p)) {
-+				*name++ = *p++;
-+			}
-+		} else {
-+			/* No, it isn't */
-+			p = dot;
- 	    }
--	    if (*p == '\0')
--		return NULL;
- 	    p++;
- 	    break;
- 	}
-@@ -225,7 +240,7 @@
-     return p;
- }
- 
--static int procnetdev_version(char *buf)
-+int procnetdev_version(char *buf)
- {
-     if (strstr(buf, "compressed"))
- 	return 3;
-@@ -234,12 +249,12 @@
-     return 1;
- }
- 
--static int get_dev_fields(char *bp, struct interface *ife)
-+int get_dev_fields(char *bp, struct interface *ife)
- {
-     switch (procnetdev_vsn) {
-     case 3:
- 	sscanf(bp,
--	"%llu %llu %lu %lu %lu %lu %lu %lu %llu %llu %lu %lu %lu %lu %lu %lu",
-+	"%Lu %Lu %lu %lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu %lu",
- 	       &ife->stats.rx_bytes,
- 	       &ife->stats.rx_packets,
- 	       &ife->stats.rx_errors,
-@@ -259,7 +274,7 @@
- 	       &ife->stats.tx_compressed);
- 	break;
-     case 2:
--	sscanf(bp, "%llu %llu %lu %lu %lu %lu %llu %llu %lu %lu %lu %lu %lu",
-+	sscanf(bp, "%Lu %Lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu",
- 	       &ife->stats.rx_bytes,
- 	       &ife->stats.rx_packets,
- 	       &ife->stats.rx_errors,
-@@ -277,7 +292,7 @@
- 	ife->stats.rx_multicast = 0;
- 	break;
-     case 1:
--	sscanf(bp, "%llu %lu %lu %lu %lu %llu %lu %lu %lu %lu %lu",
-+	sscanf(bp, "%Lu %lu %lu %lu %lu %Lu %lu %lu %lu %lu %lu",
- 	       &ife->stats.rx_packets,
- 	       &ife->stats.rx_errors,
- 	       &ife->stats.rx_dropped,
-@@ -300,22 +315,16 @@
- 
- static int if_readlist_proc(char *target)
- {
--    static int proc_read; 
-     FILE *fh;
-     char buf[512];
-     struct interface *ife;
-     int err;
- 
--    if (proc_read) 
--	    return 0; 
--    if (!target) 
--	    proc_read = 1;
--
-     fh = fopen(_PATH_PROCNET_DEV, "r");
-     if (!fh) {
- 		fprintf(stderr, _("Warning: cannot open %s (%s). Limited output.\n"),
- 			_PATH_PROCNET_DEV, strerror(errno)); 
--		return if_readconf();
-+		return -2;
- 	}	
-     fgets(buf, sizeof buf, fh);	/* eat line */
-     fgets(buf, sizeof buf, fh);
-@@ -350,7 +359,7 @@
-     while (fgets(buf, sizeof buf, fh)) {
- 	char *s, name[IFNAMSIZ];
- 	s = get_name(name, buf);    
--	ife = add_interface(name);
-+	ife = if_cache_add(name);
- 	get_dev_fields(s, ife);
- 	ife->statistics_valid = 1;
- 	if (target && !strcmp(target,name))
-@@ -359,7 +368,6 @@
-     if (ferror(fh)) {
- 	perror(_PATH_PROCNET_DEV);
- 	err = -1;
--	proc_read = 0; 
-     }
- 
- #if 0
-@@ -371,9 +379,16 @@
- 
- int if_readlist(void) 
- { 
--    int err = if_readlist_proc(NULL); 
--    if (!err)
--	    err = if_readconf();
-+    /* caller will/should check not to call this too often 
-+     *   (i.e. only if if_list_all == 0 
-+     */
-+    int err = 0;
-+    
-+    err |= if_readlist_proc(NULL); 
-+    err |= if_readconf();
-+
-+    if_list_all = 1;
-+
-     return err;
- } 
- 
-@@ -579,11 +594,11 @@
- 
- void ife_print_short(struct interface *ptr)
- {
--    printf("%-5.5s ", ptr->name);
--    printf("%5d %3d", ptr->mtu, ptr->metric);
-+    printf("%-9s ", ptr->name);
-+    printf("%5d %-2d ", ptr->mtu, ptr->metric);
-     /* If needed, display the interface statistics. */
-     if (ptr->statistics_valid) {
--	printf("%8llu %6lu %6lu %6lu",
-+	printf("%8llu %6lu %6lu %-6lu ",
- 	       ptr->stats.rx_packets, ptr->stats.rx_errors,
- 	       ptr->stats.rx_dropped, ptr->stats.rx_fifo_errors);
- 	printf("%8llu %6lu %6lu %6lu ",
-@@ -636,8 +651,8 @@
-     int hf;
-     int can_compress = 0;
-     unsigned long long rx, tx, short_rx, short_tx;
--    char Rext[5]="b";
--    char Text[5]="b";
-+    const char *Rext = "B";
-+    const char *Text = "B";
- 
- #if HAVE_AFIPX
-     static struct aftype *ipxtype = NULL;
-@@ -670,7 +685,7 @@
-     if (hw == NULL)
- 	hw = get_hwntype(-1);
- 
--    printf(_("%-9.9s Link encap:%s  "), ptr->name, hw->title);
-+    printf(_("%-9s Link encap:%s  "), ptr->name, hw->title);
-     /* For some hardware types (eg Ash, ATM) we don't print the 
-        hardware address if it's null.  */
-     if (hw->print != NULL && (! (hw_null_address(hw, ptr->hwaddr) &&
-@@ -843,10 +858,38 @@
- 	tx = ptr->stats.tx_bytes;
- 	short_rx = rx * 10;  
- 	short_tx = tx * 10;
--	if (rx > 1048576) { short_rx /= 1048576;  strcpy(Rext, "Mb"); }
--	else if (rx > 1024) { short_rx /= 1024;  strcpy(Rext, "Kb"); }
--	if (tx > 1048576) { short_tx /= 1048576;  strcpy(Text, "Mb"); }
--	else if (tx > 1024) { short_tx /= 1024;  strcpy(Text, "Kb"); }
-+	if (rx > 1125899906842624ull) {
-+	    short_rx /= 1125899906842624ull;
-+	    Rext = "PiB";
-+	} else if (rx > 1099511627776ull) {
-+	    short_rx /= 1099511627776ull;
-+	    Rext = "TiB";
-+	} else if (rx > 1073741824ull) {
-+	    short_rx /= 1073741824ull;
-+	    Rext = "GiB";
-+	} else if (rx > 1048576) {
-+	    short_rx /= 1048576;
-+	    Rext = "MiB";
-+	} else if (rx > 1024) {
-+	    short_rx /= 1024;
-+	    Rext = "KiB";
-+	}
-+	if (tx > 1125899906842624ull) {
-+	    short_tx /= 1125899906842624ull;
-+	    Text = "PiB";
-+	} else 	if (tx > 1099511627776ull) {
-+	    short_tx /= 1099511627776ull;
-+	    Text = "TiB";
-+	} else if (tx > 1073741824ull) {
-+	    short_tx /= 1073741824ull;
-+	    Text = "GiB";
-+	} else if (tx > 1048576) {
-+	    short_tx /= 1048576;
-+	    Text = "MiB";
-+	} else if (tx > 1024) {
-+	    short_tx /= 1024;
-+	    Text = "KiB";
-+	}
- 
- 	printf("          ");
- 	printf(_("TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"),
-@@ -867,7 +910,7 @@
-     }
- 
-     if ((ptr->map.irq || ptr->map.mem_start || ptr->map.dma ||
--	 ptr->map.base_addr)) {
-+	 ptr->map.base_addr >= 0x100)) {
- 	printf("          ");
- 	if (ptr->map.irq)
- 	    printf(_("Interrupt:%d "), ptr->map.irq);
---- net-tools-1.60.orig/lib/net-features.h
-+++ net-tools-1.60/lib/net-features.h
-@@ -295,6 +295,13 @@
- "-"
- #endif
- "HDLC/LAPB "
-+
-+#if HAVE_HWEUI64
-+"+"
-+#else
-+"-"
-+#endif
-+"EUI64 "
- ;
- 
- 
---- net-tools-1.60.orig/lib/nstrcmp.c
-+++ net-tools-1.60/lib/nstrcmp.c
-@@ -1,34 +1,157 @@
- /* Copyright 1998 by Andi Kleen. Subject to the GPL. */
--/* $Id: nstrcmp.c,v 1.2 1998/11/15 20:11:38 freitag Exp $ */ 
-+/* rewritten by bernd eckenfels because of complicated alias semantic */
-+/* $Id: nstrcmp.c,v 1.4 2004/06/03 22:49:17 ecki Exp $ */ 
- #include <ctype.h>
- #include <stdlib.h>
-+#include <string.h>
- #include "util.h"
- 
--/* like strcmp(), but knows about numbers */
--int nstrcmp(const char *astr, const char *b)
-+
-+/* return numerical :999 suffix or null. sideeffect: replace ':' with \0 */
-+char* cutalias(char* name)
- {
--    const char *a = astr;
-+	int digit = 0;
-+	int pos;
-+	
-+	for(pos=strlen(name); pos>0; pos--)
-+	{
-+		if (name[pos-1]==':' && digit)
-+		{
-+			name[pos-1]='\0';
-+			return name+pos;
-+		}
-+		if (!isdigit(name[pos-1]))
-+			break;
-+		digit = 1;
-+	}
-+	return NULL;
-+}
- 
--    while (*a == *b) {
--	if (*a == '\0')
--	    return 0;
--	a++;
--	b++;
--    }
--    if (isdigit(*a)) {
--	if (!isdigit(*b))
--	    return -1;
--	while (a > astr) {
--	    a--;
--	    if (!isdigit(*a)) {
--		a++;
--		break;
--	    }
--	    if (!isdigit(*b))
--		return -1;
--	    b--;
-+
-+/* return index of last non digit or -1 if it does not end with digits */
-+int rindex_nondigit(char *name)
-+{
-+	int pos = strlen(name);
-+
-+	for(pos=strlen(name); pos>0; pos--)
-+	{
-+		if (!isdigit(name[pos-1]))
-+			return pos;
- 	}
--	return atoi(a) > atoi(b) ? 1 : -1;
--    }
--    return *a - *b;
-+	return 0;
-+}
-+
-+
-+/* like strcmp(), but knows about numbers and ':' alias suffix */
-+int nstrcmp(const char *ap, const char *bp)
-+{
-+	char *a = (char*)strdup(ap);
-+	char *b = (char*)strdup(bp);
-+	char *an, *bn;
-+	int av = 0, bv = 0;
-+	char *aalias=cutalias(a);
-+	char *balias=cutalias(b);
-+	int aindex=rindex_nondigit(a);
-+	int bindex=rindex_nondigit(b);
-+	int complen=(aindex<bindex)?aindex:bindex;
-+	int res = strncmp(a, b, complen);
-+
-+	if (res != 0)
-+		{ free(a); free(b); return res; }
-+		
-+	if (aindex > bindex)
-+		{ free(a); free(b); return 1; }
-+		
-+	if (aindex < bindex)
-+		{ free(a); free(b); return -1; }
-+		
-+	an = a+aindex;
-+	bn = b+bindex;
-+	
-+	av = atoi(an);
-+	bv = atoi(bn);
-+	
-+	if (av < bv)
-+		{ free(a); free(b); return -1; }
-+		
-+	if (av > bv)
-+		{ free(a); free(b); return 1; }
-+		
-+	av = -1;
-+	if (aalias != NULL)
-+		av = atoi(aalias);
-+	
-+	bv = -1;
-+	if (balias != NULL)
-+		bv = atoi(balias);
-+	
-+	free(a); free(b);
-+	
-+	if (av < bv)
-+		return -1;
-+		
-+	if (av > bv)
-+		return 1;
-+		
-+	return 0;
-+}
-+
-+
-+#ifdef NSTRCMP_TEST
-+
-+int cs(int s)
-+{
-+	if (s < 0) return -1;
-+	if (s > 0) return 1;
-+	return 0;
-+}
-+
-+
-+int dotest(char* a, char* b, int exp)
-+{
-+	int res = nstrcmp(a, b);
-+	int err = (cs(res) != cs(exp));
-+	printf("nstrcmp(\"%s\", \"%s\")=%d %d %s\n", a, b, res, exp, err?"WRONG":"OK");
-+	return err;
- }
-+
-+int main()
-+{
-+	int err = 0;
-+	
-+	err |= dotest("eth1", "eth1", 0);
-+	err |= dotest("eth0:1", "eth0:1", 0);
-+	err |= dotest("lan", "lan", 0);
-+	err |= dotest("100", "100", 0);
-+	err |= dotest("", "", 0);
-+	err |= dotest(":", ":", 0);
-+	err |= dotest("a:b:c", "a:b:c", 0);
-+	err |= dotest("a:", "a:", 0);
-+	err |= dotest(":a", ":a", 0);
-+
-+	err |= dotest("a", "aa", -1);	
-+	err |= dotest("eth0", "eth1", -1);
-+	err |= dotest("eth1", "eth20", -1);
-+	err |= dotest("eth20", "eth100", -1);
-+	err |= dotest("eth1", "eth13", -1);
-+	err |= dotest("eth", "eth2", -1);
-+	err |= dotest("eth0:1", "eth0:2", -1);
-+	err |= dotest("eth1:10", "eth13:10", -1);
-+	err |= dotest("eth1:1", "eth1:13", -1);
-+	err |= dotest("a", "a:", -1);
-+	
-+	err |= dotest("aa", "a", 1);
-+	err |= dotest("eth2", "eth1", 1);
-+	err |= dotest("eth13", "eth1", 1);	
-+	err |= dotest("eth2", "eth", 1);
-+	err |= dotest("eth2:10", "eth2:1", 1);
-+	err |= dotest("eth2:5", "eth2:4", 1);
-+	err |= dotest("eth3:2", "eth2:3", 1);
-+	err |= dotest("eth13:1", "eth1:0", 1);
-+	err |= dotest("a:", "a", 1);
-+	err |= dotest("a1b12", "a1b2", 1);
-+
-+	return err;
-+}
-+
-+#endif
---- net-tools-1.60.orig/lib/pathnames.h
-+++ net-tools-1.60/lib/pathnames.h
-@@ -1,4 +1,3 @@
--
- /*
-  * lib/pathnames.h    This file contains the definitions of the path 
-  *                      names used by the NET-LIB.
-@@ -29,8 +28,10 @@
- #define _PATH_PROCNET_NR_NODES		"/proc/net/nr_nodes"
- #define _PATH_PROCNET_ARP		"/proc/net/arp"
- #define _PATH_PROCNET_AX25		"/proc/net/ax25"
--#define _PATH_PROCNET_IPX		"/proc/net/ipx"
--#define _PATH_PROCNET_IPX_ROUTE		"/proc/net/ipx_route"
-+#define _PATH_PROCNET_IPX_SOCKET1	"/proc/net/ipx/socket"
-+#define _PATH_PROCNET_IPX_SOCKET2	"/proc/net/ipx"
-+#define _PATH_PROCNET_IPX_ROUTE1	"/proc/net/ipx/route"
-+#define _PATH_PROCNET_IPX_ROUTE2	"/proc/net/ipx_route"
- #define _PATH_PROCNET_ATALK		"/proc/net/appletalk"
- #define _PATH_PROCNET_IP_BLK		"/proc/net/ip_block"
- #define _PATH_PROCNET_IP_FWD		"/proc/net/ip_forward"
-@@ -45,6 +46,7 @@
- #define _PATH_PROCNET_X25              "/proc/net/x25"
- #define _PATH_PROCNET_X25_ROUTE                "/proc/net/x25_routes"
- #define _PATH_PROCNET_DEV_MCAST		"/proc/net/dev_mcast"
-+#define _PATH_PROCNET_ATALK_ROUTE	"/proc/net/atalk_route"
- 
- /* pathname for the netlink device */
- #define _PATH_DEV_ROUTE	"/dev/route"
---- net-tools-1.60.orig/lib/tr.c
-+++ net-tools-1.60/lib/tr.c
-@@ -2,7 +2,7 @@
-  * lib/tr.c   This file contains an implementation of the "Tokenring"
-  *              support functions.
-  *
-- * Version:     $Id: tr.c,v 1.8 2000/02/02 08:56:30 freitag Exp $
-+ * Version:     $Id: tr.c,v 1.9 2005/05/16 03:15:12 ecki Exp $
-  *
-  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-  *              Copyright 1993 MicroWalt Corporation
-@@ -30,8 +30,14 @@
- #include "net-support.h"
- #include "pathnames.h"
- #include "intl.h"
-+#include "util.h"
- 
-+
-+/* actual definition at the end of file */
- extern struct hwtype tr_hwtype;
-+#ifdef ARPHRD_IEEE802_TR
-+extern struct hwtype tr_hwtype1;
-+#endif
- 
- static char *pr_tr(unsigned char *ptr)
- {
-@@ -42,7 +48,7 @@
- 	     (ptr[3] & 0377), (ptr[4] & 0377), (ptr[5] & 0377)
- 	);
-     return (buff);
--}
-+      }
- 
- 
- static int in_tr(char *bufp, struct sockaddr *sap)
-@@ -51,7 +57,17 @@
-     char c, *orig;
-     int i, val;
- 
-+#ifdef ARPHRD_IEEE802_TR
-+    if (kernel_version() < KRELEASE(2,3,30)) { 
-+        sap->sa_family = tr_hwtype.type;
-+    } else { 
-+        sap->sa_family = tr_hwtype1.type;
-+    } 	
-+#else
-     sap->sa_family = tr_hwtype.type;
-+    #warning "Limited functionality, no support for ARPHRD_IEEE802_TR (old kernel headers?)"
-+#endif
-+
-     ptr = sap->sa_data;
- 
-     i = 0;
---- net-tools-1.60.orig/lib/util.h
-+++ net-tools-1.60/lib/util.h
-@@ -14,3 +14,6 @@
- 
- char *safe_strncpy(char *dst, const char *src, size_t size); 
- 
-+
-+#define netmin(a,b) ((a)<(b) ? (a) : (b))
-+#define netmax(a,b) ((a)>(b) ? (a) : (b))
---- net-tools-1.60.orig/lib/irda.c
-+++ net-tools-1.60/lib/irda.c
-@@ -1,13 +1,15 @@
- /*********************************************************************
-  *                
-  * Filename:      irda.c
-- * Version:       0.1
-- * Description:   A first attempt to make ifconfig understand IrDA
-+ * Version:       0.2
-+ * Description:   A second attempt to make ifconfig understand IrDA
-  * Status:        Experimental.
-  * Author:        Dag Brattli <dagb@cs.uit.no>
-  * Created at:    Wed Apr 21 09:03:09 1999
-  * Modified at:   Wed Apr 21 09:17:05 1999
-  * Modified by:   Dag Brattli <dagb@cs.uit.no>
-+ * Modified at:   Wed May  1 11:51:44 CEST 2002
-+ * Modified by:   Christoph Bartelmus <christoph@bartelmus.de>
-  * 
-  *     This program is free software; you can redistribute it and/or 
-  *     modify it under the terms of the GNU General Public License as 
-@@ -59,9 +61,9 @@
-  */
- static char *irda_print(unsigned char *ptr)
- {
--    static char buff[8];
-+    static char buff[12];
- 
--    sprintf(&buff[strlen(buff)], "%02x:%02x:%02x:%02x", ptr[3], ptr[2], 
-+    snprintf(buff, 12, "%02x:%02x:%02x:%02x", ptr[3], ptr[2], 
- 	    ptr[1], ptr[0]);
- 
-     return (buff);
---- net-tools-1.60.orig/lib/x25_sr.c
-+++ net-tools-1.60/lib/x25_sr.c
-@@ -67,7 +67,7 @@
-   strcpy(target, *args++);
- 
-   /* Clean out the x25_route_struct structure. */
--  memset((char *) &rt, 0, sizeof(struct x25_route_struct));
-+  memset((char *) &rt, 0, sizeof(rt));
- 
- 
-   if ((sigdigits = x25_aftype.input(0, target, (struct sockaddr *)&sx25)) < 0) {
-@@ -76,8 +76,8 @@
-   }
-   rt.sigdigits=sigdigits;
- 
--  /* x25_route_struct.address isn't type struct sockaddr_x25, Why? */
--  memcpy(&rt.address, &sx25.sx25_addr, sizeof(x25_address));
-+  /* this works with 2.4 and 2.6 headers struct x25_address vs. typedef */
-+  memcpy(&rt.address, &sx25.sx25_addr, sizeof(sx25.sx25_addr));
- 
-   while (*args) {
- 	if (!strcmp(*args,"device") || !strcmp(*args,"dev")) {
---- net-tools-1.60.orig/lib/eui64.c
-+++ net-tools-1.60/lib/eui64.c
-@@ -0,0 +1,155 @@
-+/*
-+ * lib/eui64.c  This file contains support for generic EUI-64 hw addressing
-+ *
-+ * Version:     $Id: eui64.c,v 1.1 2001/11/12 02:12:05 ecki Exp $
-+ *
-+ * Author:      Daniel Stodden <stodden@in.tum.de>
-+ *              Copyright 2001 Daniel Stodden
-+ *
-+ *              blueprinted from ether.c 
-+ *              Copyright 1993 MicroWalt Corporation
-+ *
-+ *              This program is free software; you can redistribute it
-+ *              and/or  modify it under  the terms of  the GNU General
-+ *              Public  License as  published  by  the  Free  Software
-+ *              Foundation;  either  version 2 of the License, or  (at
-+ *              your option) any later version.
-+ */
-+#include "config.h"
-+
-+#if HAVE_HWEUI64
-+
-+#include <sys/types.h>
-+#include <sys/ioctl.h>
-+#include <sys/socket.h>
-+#include <net/if_arp.h>
-+#include <stdlib.h>
-+#include <stdio.h>
-+#include <ctype.h>
-+#include <errno.h>
-+#include <fcntl.h>
-+#include <string.h>
-+#include <termios.h>
-+#include <unistd.h>
-+#include "net-support.h"
-+#include "pathnames.h"
-+#include "intl.h"
-+
-+/*
-+ * EUI-64 constants
-+ */
-+
-+#define EUI64_ALEN	8
-+
-+#ifndef ARPHRD_EUI64
-+#define ARPHRD_EUI64	27
-+#warning "ARPHRD_EUI64 not defined in <net/if_arp.h>. Using private value 27"
-+#endif
-+
-+struct hwtype eui64_hwtype;
-+
-+/* Display an EUI-64 address in readable format. */
-+static char *pr_eui64( unsigned char *ptr )
-+{
-+	static char buff[64];
-+
-+	snprintf(buff, sizeof(buff), "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X",
-+		 (ptr[0] & 0377), (ptr[1] & 0377), (ptr[2] & 0377), (ptr[3] & 0377), 
-+		 (ptr[4] & 0377), (ptr[5] & 0377), (ptr[6] & 0377), (ptr[7] & 0377)
-+		);
-+	return (buff);
-+}
-+
-+/* Start the PPP encapsulation on the file descriptor. */
-+static int in_eui64( char *bufp, struct sockaddr *sap )
-+{
-+	unsigned char *ptr;
-+	char c, *orig;
-+	int i;
-+	unsigned val;
-+
-+	sap->sa_family = eui64_hwtype.type;
-+	ptr = sap->sa_data;
-+
-+	i = 0;
-+	orig = bufp;
-+	
-+	while ((*bufp != '\0') && (i < EUI64_ALEN)) {
-+		val = 0;
-+		c = *bufp++;
-+		if (isdigit(c))
-+			val = c - '0';
-+		else if (c >= 'a' && c <= 'f')
-+			val = c - 'a' + 10;
-+		else if (c >= 'A' && c <= 'F')
-+			val = c - 'A' + 10;
-+		else {
-+#ifdef DEBUG
-+			fprintf( stderr, _("in_eui64(%s): invalid eui64 address!\n"), 
-+				 orig );
-+#endif
-+			errno = EINVAL;
-+			return (-1);
-+		}
-+
-+		val <<= 4;
-+		c = *bufp;
-+		if (isdigit(c))
-+			val |= c - '0';
-+		else if (c >= 'a' && c <= 'f')
-+			val |= c - 'a' + 10;
-+		else if (c >= 'A' && c <= 'F')
-+			val |= c - 'A' + 10;
-+		else if (c == ':' || c == 0)
-+			val >>= 4;
-+		else {
-+#ifdef DEBUG
-+			fprintf( stderr, _("in_eui64(%s): invalid eui64 address!\n"), 
-+				 orig );
-+#endif
-+			errno = EINVAL;
-+			return (-1);
-+		}
-+
-+		if (c != 0)
-+			bufp++;
-+
-+		*ptr++ = (unsigned char) (val & 0377);
-+		i++;
-+		
-+		/* We might get a semicolon here - not required. */
-+		if (*bufp == ':') {
-+			if (i == EUI64_ALEN) {
-+#ifdef DEBUG
-+				fprintf(stderr, _("in_eui64(%s): trailing : ignored!\n"),
-+					orig)
-+#endif
-+					; /* nothing */
-+			}
-+			bufp++;
-+		}
-+	}
-+
-+	/* That's it.  Any trailing junk? */
-+	if ((i == EUI64_ALEN) && (*bufp != '\0')) {
-+#ifdef DEBUG
-+		fprintf(stderr, _("in_eui64(%s): trailing junk!\n"), orig);
-+		errno = EINVAL;
-+		return (-1);
-+#endif
-+	}
-+#ifdef DEBUG
-+	fprintf(stderr, "in_eui64(%s): %s\n", orig, pr_eui64(sap->sa_data));
-+#endif
-+
-+    return (0);
-+}
-+
-+struct hwtype eui64_hwtype =
-+{
-+	"eui64", NULL, /*"EUI-64 addressing", */ ARPHRD_EUI64, EUI64_ALEN,
-+	pr_eui64, in_eui64, NULL, 0
-+};
-+
-+
-+#endif				/* HAVE_EUI64 */
---- net-tools-1.60.orig/rarp.c
-+++ net-tools-1.60/rarp.c
-@@ -3,7 +3,7 @@
-  *              that maintains the kernel's RARP cache.  It is derived
-  *              from Fred N. van Kempen's arp command.
-  *
-- * Version:	$Id: rarp.c,v 1.6 2001/04/08 17:05:05 pb Exp $
-+ * Version:	$Id: rarp.c,v 1.9 2007/12/02 02:19:52 ecki Exp $
-  *
-  * Usage:       rarp -d hostname                      Delete entry
-  *              rarp -s hostname ethernet_address     Add entry
-@@ -40,6 +40,7 @@
- #include "net-support.h"
- #include "version.h"
- #include "pathnames.h"
-+#include "proc.h"
- 
- static char no_rarp_message[] = N_("This kernel does not support RARP.\n");
- 
-@@ -154,7 +155,7 @@
- 
- static int display_cache(void)
- {
--    FILE *fd = fopen(_PATH_PROCNET_RARP, "r");
-+    FILE *fd = proc_fopen(_PATH_PROCNET_RARP);
-     char buffer[256];
-     if (fd == NULL) {
- 	if (errno == ENOENT)
---- net-tools-1.60.orig/slattach.c
-+++ net-tools-1.60/slattach.c
-@@ -73,7 +73,7 @@
- 
- 
- const char *Release = RELEASE,
--	   *Version = "@(#) slattach 1.21 (1999-11-21)",
-+	   *Version = "$Id: slattach.c,v 1.11 2005/12/04 05:15:36 ecki Exp $",
- 	   *Signature = "net-tools, Fred N. van Kempen et al.";
- 
- 
-@@ -115,7 +115,7 @@
- int		opt_k = 0;		/* "keepalive" value		*/
- #endif
- int		opt_l = 0;		/* "lock it" flag		*/
--int		opt_L = 0;		/* clocal flag			*/
-+int		opt_L = 0;		/* 3-wire mode flag		*/
- int		opt_m = 0;		/* "set RAW mode" flag		*/
- int		opt_n = 0;		/* "set No Mesg" flag		*/
- #ifdef SIOCSOUTFILL
-@@ -342,9 +342,11 @@
-   tty->c_oflag = (0);				/* output flags		*/
-   tty->c_lflag = (0);				/* local flags		*/
-   speed = (tty->c_cflag & CBAUD);		/* save current speed	*/
--  tty->c_cflag = (CRTSCTS | HUPCL | CREAD);	/* UART flags		*/
-+  tty->c_cflag = (HUPCL | CREAD);		/* UART flags		*/
-   if (opt_L) 
- 	tty->c_cflag |= CLOCAL;
-+  else
-+	tty->c_cflag |= CRTSCTS;
-   tty->c_cflag |= speed;			/* restore speed	*/
-   return(0);
- }
---- net-tools-1.60.orig/include/util-ank.h
-+++ net-tools-1.60/include/util-ank.h
-@@ -75,6 +75,6 @@
- extern int do_class(int argc, char **argv);
- extern int do_filter(int argc, char **argv);
- 
--extern const char *format_host(int af, void *addr, __u8 *abuf, int alen);
-+extern const char *format_host(int af, void *addr, char *abuf, int alen);
- 
- #endif /* __UTILS_H__ */
---- net-tools-1.60.orig/include/interface.h
-+++ net-tools-1.60/include/interface.h
-@@ -64,13 +64,17 @@
- extern int if_fetch(struct interface *ife);
- 
- extern int for_all_interfaces(int (*)(struct interface *, void *), void *);
--extern int free_interface_list(void);
-+extern int if_cache_free(void);
- extern struct interface *lookup_interface(char *name);
- extern int if_readlist(void);
- 
- extern int do_if_fetch(struct interface *ife);
- extern int do_if_print(struct interface *ife, void *cookie);
- 
-+extern int    procnetdev_version(char *buf);
-+extern int    get_dev_fields(char *bp, struct interface *ife);
-+extern char * get_name(char *name, char *p);
-+
- extern void ife_print(struct interface *ptr);
- 
- extern int ife_short;
---- net-tools-1.60.orig/include/mii.h
-+++ net-tools-1.60/include/mii.h
-@@ -6,11 +6,14 @@
-  * Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
-  */
- 
--#ifndef _LINUX_MII_H
--#define _LINUX_MII_H
-+#ifndef _NETTOOL_MII_H
-+#define _NETTOOLS_MII_H
-+
-+#include <linux/sockios.h>
- 
- /* network interface ioctl's for MII commands */
- #ifndef SIOCGMIIPHY
-+#warning "SIOCGMIIPHY is not defined by your kernel source"
- #define SIOCGMIIPHY (SIOCDEVPRIVATE)	/* Read from current PHY */
- #define SIOCGMIIREG (SIOCDEVPRIVATE+1) 	/* Read any PHY register */
- #define SIOCSMIIREG (SIOCDEVPRIVATE+2) 	/* Write any PHY register */
-@@ -38,6 +41,7 @@
- #define  MII_BMCR_RESTART	0x0200
- #define  MII_BMCR_DUPLEX	0x0100
- #define  MII_BMCR_COLTEST	0x0080
-+#define  MII_BMCR_SPEED1000	0x0040
- 
- /* Basic Mode Status Register */
- #define MII_BMSR		0x01
-@@ -83,4 +87,17 @@
- #define  MII_ANER_PAGE_RX	0x0002
- #define  MII_ANER_LP_AN_ABLE	0x0001
- 
--#endif /* _LINUX_MII_H */
-+#define MII_CTRL1000		0x09
-+#define   MII_BMCR2_1000FULL	0x0200
-+#define   MII_BMCR2_1000HALF	0x0100
-+
-+#define MII_STAT1000		0x0a
-+#define   MII_LPA2_1000LOCALOK  0x2000
-+#define   MII_LPA2_1000REMRXOK	0x1000
-+#define   MII_LPA2_1000FULL	0x0800
-+#define   MII_LPA2_1000HALF	0x0400
-+
-+/* Last register we need for show_basic_mii() */
-+#define MII_BASIC_MAX          (MII_STAT1000+1)
-+
-+#endif /* _NETTOOLS_MII_H */
---- net-tools-1.60.orig/man/en_US/rarp.8
-+++ net-tools-1.60/man/en_US/rarp.8
-@@ -61,8 +61,8 @@
- Create a RARP address mapping entry for host
- .B hostname
- with hardware address set to
--.B hw_addr
--.  The format of the hardware address is dependent on the hardware
-+.BR hw_addr .
-+The format of the hardware address is dependent on the hardware
- class, but for most classes one can assume that the usual presentation
- can be used.  For the Ethernet class, this is 6 bytes in hexadecimal,
- separated by colons.
---- net-tools-1.60.orig/man/en_US/arp.8
-+++ net-tools-1.60/man/en_US/arp.8
-@@ -1,56 +1,111 @@
--.TH ARP 8 "5 Jan 1999" "net-tools" "Linux Programmer's Manual"
-+.TH ARP 8 "2007-12-01" "net-tools" "Linux Programmer's Manual"
- .SH NAME
- arp \- manipulate the system ARP cache
- .SH SYNOPSIS
- .B arp 
- .RB [ \-vn ] 
--.RB [ "\-H type" ] 
--.RB [ "-i if" ] 
--.B -a 
--.RB [ hostname ]
-+.RB [ \-H 
-+.IR type ] 
-+.RB [ \-i
-+.IR if ] 
-+.RB [ \-a ] 
-+.RI [ hostname ]
- .PP
- .B arp 
- .RB [ \-v ]
--.RB [ "\-i if" ] 
--.B "\-d hostname"
-+.RB [ \-i
-+.IR if ] 
-+.B \-d 
-+.I hostname
- .RB [ pub ]
- .PP
- .B arp 
- .RB [ \-v ] 
--.RB [ "\-H type" ] 
--.RB [ "\-i if" ] 
--.B -s hostname hw_addr
-+.RB [ \-H
-+.IR type ] 
-+.RB [ \-i
-+.IR if ] 
-+.B \-s
-+.I hostname hw_addr
- .RB [ temp ] 
- .PP
- .B arp 
- .RB [ \-v ] 
--.RB [ "\-H type" ] 
--.RB [ "\-i if" ] 
--.B -s hostname hw_addr
--.RB [ "netmask nm" ] 
-+.RB [ \-H
-+.IR type ] 
-+.RB [ \-i
-+.IR if ] 
-+.B \-s
-+.I hostname hw_addr
-+.RB [ netmask
-+.IR nm ] 
- .B pub
- .PP
- .B arp 
- .RB [ \-v ] 
--.RB [ "\-H type" ] 
--.RB [ "\-i if" ] 
--.B -Ds hostname ifa
--.RB [ "netmask nm" ] 
-+.RB [ \-H
-+.IR type ] 
-+.RB [ \-i
-+.IR if ] 
-+.B \-Ds 
-+.I hostname
-+.I ifname
-+.RB [ netmask
-+.IR nm ] 
- .B pub
- .PP
- .B arp 
- .RB [ \-vnD ]
--.RB [ "\-H type" ] 
--.RB [ "-i if" ]
--.B -f [filename]
-+.RB [ \-H 
-+.IR type ] 
-+.RB [ \-i
-+.IR if ]
-+.B \-f 
-+.RI [ filename ]
- 
- .SH DESCRIPTION
- .B Arp
--manipulates the kernel's ARP cache in various ways.  The primary options
--are clearing an address mapping entry and manually setting up one.  For
--debugging purposes, the
-+manipulates or displays the kernel's IPv4 network neighbour cache. It can add
-+entries to the table, delete one or display the current content.
-+
-+.B ARP
-+stands for Address Resolution Protocol, which is used to find the media
-+access control address of a network neighbour for a given IPv4 Address.
-+.SH MODES
- .B arp
--program also allows a complete dump of the ARP cache.
-+with no mode specifier will print the current content of the table. It is
-+possible to limit the number of entries printed, by specifying an hardware
-+address type, interface name or host address.
-+
-+.B arp -d
-+.I address
-+will delete a ARP table entry. Root or netadmin priveledge is required to do
-+this. The entry is found by IP address. If a hostname is given, it will be
-+resolved before looking up the entry in the ARP table.
-+
-+.B arp -s
-+.I address hw_addr
-+is used to set up a new table entry. The format of the 
-+.I hw_addr
-+parameter is dependent on the hardware class, but for most classes one can
-+assume that the usual presentation can be used.  For the Ethernet class,
-+this is 6 bytes in hexadecimal, separated by colons. When adding proxy arp
-+entries (that is those with the
-+.BR pub lish 
-+flag set a 
-+.B netmask 
-+may be specified to proxy arp for entire subnets. This is not good
-+practice, but is supported by older kernels because it can be
-+useful. If the
-+.B temp
-+flag is not supplied entries will be permanent stored into the ARP
-+cache. To simplyfy setting up entries for one of your own network interfaces, you can use the
-+.B "arp \-Ds"
-+.I address ifname
-+form. In that case the hardware address is taken from the interface with the
-+specified name.
-+
-+.br
- .SH OPTIONS
- .TP
- .B "\-v, \-\-verbose"
-@@ -76,21 +131,13 @@
- and
- .RB "NET/ROM (" netrom ")."
- .TP
--.B "\-a [hostname], \-\-display [hostname]"
--Shows the entries of the specified hosts.  If the
--.B hostname
--parameter is not used,
--.B all
--entries will be displayed.
--.TP
--.B "\-d hostname, \-\-delete hostname"
--Remove any entry for the specified host.  This can be used if the
--indicated host is brought down, for example.
-+.B \-a
-+Use alternate BSD style output format (with no fixed columns).
- .TP
- .B "\-D, \-\-use-device"
--Use the interface
--.BR ifa "'s"
--hardware address.
-+Instead of a hw_addr, the given argument is the name of an interface. 
-+.B arp
-+will use the MAC address of that interface for the table entry. This is usually the best option to set up a proxy ARP entry to yourself.
- .TP
- .B "\-i If, \-\-device If"
- Select an interface. When dumping the ARP cache only entries matching
-@@ -106,33 +153,15 @@
- .B NOTE:
- This has to be different from the interface to which the IP
- datagrams will be routed.
--.TP
--.B "\-s hostname hw_addr, \-\-set hostname"
--Manually create an ARP address mapping entry for host
--.B hostname
--with hardware address set to
--.B hw_addr
--.  The format of the hardware address is dependent on the hardware
--class, but for most classes one can assume that the usual presentation
--can be used.  For the Ethernet class, this is 6 bytes in hexadecimal,
--separated by colons. When adding proxy arp entries (that is those with
--the 
--.BR pub lish 
--flag set a 
--.B netmask 
--may be specified to proxy arp for entire subnets. This is not good
--practice, but is supported by older kernels because it can be
--useful. If the
--.B temp
--flag is not supplied entries will be permanent stored into the ARP
--cache.
--.br
- .B NOTE:
- As of kernel 2.2.0 it is no longer possible to set an ARP entry for an 
- entire subnet. Linux instead does automagic proxy arp when a route
- exists and it is forwarding. See 
- .BR arp (7)
--for details.
-+for details. Also the
-+.B dontpub
-+option which is available for delete and set operations cannot be 
-+used with 2.4 and newer kernels.
- .TP
- .B "\-f filename, \-\-file filename"
- Similar to the
-@@ -167,8 +196,18 @@
- and published entries have the
- .B P
- flag.
-+.SH EXSAMPLES
-+.B /usr/sbin/arp -i eth0 -Ds 10.0.0.2 eth1 pub
-+
-+This will answer ARP requests for 10.0.0.2 on eth0 with the MAC address for
-+eth1.
-+
-+.B /usr/sbin/arp -i eth1 -d 10.0.0.1
-+
-+Delete the ARP table entry for 10.0.0.1 on interface eth1. This will match
-+published proxy ARP entries and permanent entries.
- .SH FILES
--.I /proc/net/arp,
-+.I /proc/net/arp
- .br
- .I /etc/networks
- .br
-@@ -178,5 +217,4 @@
- .SH SEE ALSO
- rarp(8), route(8), ifconfig(8), netstat(8)
- .SH AUTHORS
--Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> with a lot of improvements
--from net-tools Maintainer Bernd Eckenfels <net-tools@lina.inka.de>.
-+Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>, Bernd Eckenfels <net-tools@lina.inka.de>.
---- net-tools-1.60.orig/man/en_US/ethers.5
-+++ net-tools-1.60/man/en_US/ethers.5
-@@ -1,4 +1,4 @@
--.TH ETHERS 5 "April 26th, 1996" "" "File formats"
-+.TH ETHERS 5 "May 15th, 2005" "" "File formats"
- .SH NAME \"{{{roff}}}\"{{{
- ethers \- Ethernet address to IP number database
- .\"}}}
-@@ -10,8 +10,8 @@
- \fIEthernet-address\fP  \fIIP-number\fP
- .RE
- .sp
--The two items are separated by any number of SPACE and/or TAB char
--acters.   A \fB#\fP at the beginning of a line starts a comment
-+The two items are separated by any number of SPACE and/or TAB characters.
-+A \fB#\fP at the beginning of a line starts a comment
- which extends to the end of the line.  The \fIEthernet-address\fP is
- written as
- .IR x : x : x : x : x : x ,
---- net-tools-1.60.orig/man/en_US/ifconfig.8
-+++ net-tools-1.60/man/en_US/ifconfig.8
-@@ -1,10 +1,10 @@
--.TH IFCONFIG 8 "14 August 2000" "net-tools" "Linux Programmer's Manual"
-+.TH IFCONFIG 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- .SH NAME
- ifconfig \- configure a network interface
- .SH SYNOPSIS
--.B "ifconfig [interface]"
-+.B "ifconfig [-v] [-a] [-s] [interface]"
- .br
--.B "ifconfig interface [aftype] options | address ..."
-+.B "ifconfig [-v] interface [aftype] options | address ..."
- .SH DESCRIPTION
- .B Ifconfig
- is used to configure the kernel-resident network interfaces.  It is
-@@ -41,11 +41,27 @@
- (AMPR Packet radio).
- .SH OPTIONS
- .TP
-+.B -a
-+display all interfaces which are currently available, even if down
-+.TP
-+.B -s
-+display a short list (like netstat -i)
-+.TP
-+.B -v
-+be more verbose for some error conditions
-+.TP
- .B interface
- The name of the interface.  This is usually a driver name followed by
- a unit number, for example
- .B eth0
--for the first Ethernet interface.
-+for the first Ethernet interface. If your kernel supports alias interfaces,
-+you can specify them with 
-+.B eth0:0
-+for the first alias of eth0. You can use them to assign a second address. To
-+delete an alias interface use
-+.BR "ifconfig eth0:0 down" .
-+Note: for every scope (i.e. same net with address/netmask combination) all
-+aliases are deleted, if you delete the first (primary).
- .TP
- .B up
- This flag causes the interface to be activated.  It is implicitly
-@@ -173,11 +189,20 @@
- are shared with all alias addresses on the same device. If you want per-address
- statistics you should add explicit accounting
- rules for the address using the 
--.BR ipchains(8)
-+.BR ipchains (8)
-+or
-+.BR iptables (8)
- command.
- .LP
--Interrupt problems with Ethernet device drivers fail with EAGAIN. See
--.I http://cesdis.gsfc.nasa.gov/linux/misc/irq-conflict.html
-+Since net-tools 1.60-4 ifconfig is printing byte counters and human readable
-+counters with IEC 60027-2 units. So 1 KiB are 2^10 byte. Note, the numbers 
-+are truncated to one decimal (which can by quite a large error if you 
-+consider 0.1 PiB is 112.589.990.684.262 bytes :)
-+.LP
-+Interrupt problems with Ethernet device drivers fail with EAGAIN
-+.I (SIOCSIIFLAGS: Resource temporarily unavailable)
-+it is most likely a interrupt conflict. See
-+.I http://www.scyld.com/expert/irq-conflict.html
- for more information.
- .SH FILES
- .I /proc/net/socket 
-@@ -189,7 +214,9 @@
- While appletalk DDP and IPX addresses will be displayed they cannot be
- altered by this command.
- .SH SEE ALSO
--route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-+route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
-+.br
-+http://physics.nist.gov/cuu/Units/binary.html - Prefixes for binary multiples
- .SH AUTHORS
- Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
- .br
-@@ -198,3 +225,5 @@
- Phil Blundell, <Philip.Blundell@pobox.com>
- .br
- Andi Kleen
-+.br
-+Bernd Eckenfels, <net-tools@lina.inka.de>
---- net-tools-1.60.orig/man/en_US/netstat.8
-+++ net-tools-1.60/man/en_US/netstat.8
-@@ -8,7 +8,7 @@
- .\" Modified: Tuan Hoang tqhoang@bigfoot.com 
- .\"
- .\"
--.TH NETSTAT 8 "19 December 2000" "net-tools" "Linux Programmer's Manual"
-+.TH NETSTAT 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- 
- .SH NAME
- netstat \- Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships
-@@ -23,7 +23,7 @@
- .RB [ \-\-listening | \-l ]
- .RB [ \-\-all | \-a ]
- .RB [ \-\-numeric | \-n ]
--.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-+.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
- .RB [ \-\-symbolic | \-N ]
- .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
- .RB [ \-\-timers | \-o ]
-@@ -37,31 +37,30 @@
- .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
- .RB [ \-\-verbose | \-v ]
- .RB [ \-\-numeric | \-n ]
--.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-+.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
- .RB [ \-\-continuous | \-c]
- .P
- .B netstat
- .RB { \-\-interfaces | \-i }
--.RI [ iface ]
- .RB [ \-\-all | \-a ]
- .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
- .RB [ \-\-verbose | \-v ]
- .RB [ \-\-program | \-p ]
- .RB [ \-\-numeric | \-n ]
--.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-+.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
- .RB [ \-\-continuous | \-c]
- .P
- .B netstat
- .RB { \-\-groups | \-g }
- .RB [ \-\-numeric | \-n ]
--.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-+.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
- .RB [ \-\-continuous | \-c]
- .P
- .B netstat
- .RB { \-\-masquerade | \-M }
- .RB [ \-\-extend | \-e ]
- .RB [ \-\-numeric | \-n ]
--.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-+.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
- .RB [ \-\-continuous | \-c]
- .P
- .B netstat
-@@ -78,6 +77,8 @@
- .P
- .IR address_family_options :
- .PP
-+.RB [ -4 ]
-+.RB [ -6 ]
- .RB [ \-\-protocol= { inet , unix , ipx , ax25 , netrom , ddp }[, ...] ]
- .RB [ \-\-unix | \-x ] 
- .RB [ \-\-inet | \-\-ip ]
-@@ -98,12 +99,17 @@
- address families, then the active sockets of all configured address
- families will be printed.
- .SS "\-\-route , \-r"
--Display the kernel routing tables.
-+Display the kernel routing tables. See the description in 
-+.BR route (8) 
-+for details. 
-+.B netstat -r 
-+and 
-+.B route -e 
-+produce the same output.
- .SS "\-\-groups , \-g"
- Display multicast group membership information for IPv4 and IPv6.
--.SS "\-\-interface=\fIiface \fR, \fB\-i"
--Display a table of all network interfaces, or the specified
--.IR iface ) .
-+.SS "\-\-interfaces, \-i"
-+Display a table of all network interfaces.
- .SS "\-\-masquerade , \-M"
- Display a list of masqueraded connections.
- .SS "\-\-statistics , \-s"
-@@ -165,12 +171,11 @@
- .SS "\-a, \-\-all"
- Show both listening and non-listening sockets.  With the
- .B --interfaces
--option, show interfaces that are not marked 
-+option, show interfaces that are not up
- .SS "\-F"
- Print routing information from the FIB.  (This is the default.)
- .SS "\-C"
- Print routing information from the route cache.
--.IR UP .
- .P
- .SH OUTPUT
- .P
-@@ -221,7 +226,7 @@
- The socket is waiting after close to handle packets still in the network.
- .TP
- .I
--CLOSED
-+CLOSE
- The socket is not being used.
- .TP
- .I
-@@ -438,7 +443,7 @@
- .P
- .SH AUTHORS
- The netstat user interface was written by Fred Baumgarten
--<dc6iq@insu1.etec.uni-karlsruhe.de> the man page basically
-+<dc6iq@insu1.etec.uni-karlsruhe.de>, the man page basically
- by Matt Welsh <mdw@tc.cornell.edu>. It was updated by
- Alan Cox <Alan.Cox@linux.org> but could do with a bit more
- work.  It was updated again by Tuan Hoang
---- net-tools-1.60.orig/man/en_US/route.8
-+++ net-tools-1.60/man/en_US/route.8
-@@ -1,4 +1,4 @@
--.TH ROUTE 8 "2 January 2000" "net-tools" "Linux Programmer's Manual"
-+.TH ROUTE 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- .SH NAME
- route \- show / manipulate the IP routing table
- .SH SYNOPSIS
-@@ -141,7 +141,7 @@
- set the TCP Maximum Segment Size (MSS) for connections over this route
- to M bytes. 
- The default is the device MTU minus headers, or a lower MTU when path mtu 
--discovery occured. This setting can be used to force smaller TCP packets on the
-+discovery occurred. This setting can be used to force smaller TCP packets on the
- other end when path mtu discovery does not work (usually because of
- misconfigured firewalls that block ICMP Fragmentation Needed)
- .TP 
-@@ -179,17 +179,20 @@
- 
- .SH EXAMPLES
- .TP
--.B route add -net 127.0.0.0
--adds the normal loopback entry, using netmask 255.0.0.0 (class A net,
--determined from the destination address) and associated with the 
--"lo" device (assuming this device was prviously set up correctly with
-+.B route add -net 127.0.0.0 netmask 255.0.0.0 dev lo
-+adds the normal loopback entry, using netmask 255.0.0.0 and associated with the 
-+"lo" device (assuming this device was previously set up correctly with
- .BR ifconfig (8)). 
- 
- .TP 
- .B route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
--adds a route to the network 192.56.76.x via 
--"eth0". The Class C netmask modifier is not really necessary here because
--192.* is a Class C IP address. The word "dev" can be omitted here. 
-+adds a route to the local network 192.56.76.x via 
-+"eth0".  The word "dev" can be omitted here. 
-+
-+.TP
-+.B route del default
-+deletes the current default route, which is labeled "default" or 0.0.0.0
-+in the destination field of the current routing table.
- 
- .TP
- .B route add default gw mango-gw
-@@ -289,7 +292,7 @@
- Interface to which packets for this route will be sent.
- .TP
- .B MSS 
--Default maximum segement size for TCP connections over this route.
-+Default maximum segment size for TCP connections over this route.
- .TP
- .B Window  
- Default window size for TCP connections over this route.
-@@ -323,4 +326,4 @@
- Linus Torvalds for pl15. Alan Cox added the mss and window options for
- Linux 1.1.22. irtt support and merged with netstat from Bernd Eckenfels.
- .SH AUTHOR
--Currently maintained by Phil Blundell <Philip.Blundell@pobox.com>.
-+Currently maintained by Phil Blundell <Philip.Blundell@pobox.com> and Bernd Eckenfels <net-tools@lina.inka.de>.
---- net-tools-1.60.orig/man/en_US/slattach.8
-+++ net-tools-1.60/man/en_US/slattach.8
-@@ -1,4 +1,4 @@
--.TH SLATTACH 8 "12 Feb 1994" "" ""
-+.TH SLATTACH 8 "10 Oct 2006" "" ""
- .SH NAME
- slattach \- attach a network interface to a serial line
- .SH SYNOPSIS
-@@ -24,6 +24,7 @@
- .B "[-h]"
- Exit when the carrier is lost. This works on both /dev/tty and /dev/cua
- devices by directly monitoring the carrier status every 15 seconds.
-+.TP
- .B "[-v]"
- Enable verbose output.  Useful in shell scripts.
- .TP
-@@ -41,7 +42,7 @@
- .TP
- .B "[-e]"
- Exit right after initializing device, instead of waiting for the
--line to hangup.
-+line to hang up.
- .TP
- .B "[-L]"
- Enable 3 wire operation. The terminal is moved into CLOCAL mode, 
-@@ -50,8 +51,8 @@
- .B "[-p proto]"
- Set a specific kind of protocol to use on the line.  The default
- is set to
--.B "cslip"
--, i.e. compressed SLIP.  Other possible values are
-+.BR "cslip" ,
-+i.e. compressed SLIP.  Other possible values are
- .B "slip"
- (normal SLIP), 
- .B "adaptive"
---- net-tools-1.60.orig/man/en_US/mii-tool.8
-+++ net-tools-1.60/man/en_US/mii-tool.8
-@@ -1,7 +1,7 @@
- .\" Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
- .\" mii-tool.8 1.5 2000/04/25 22:58:19
- .\"
--.TH MII-TOOL 8 "2000/04/25 22:58:19" "net-tools"
-+.TH MII-TOOL 8 "2004/03/28 23:30:00" "net-tools"
- 
- .SH NAME
- mii-tool \- view, manipulate media-independent interface status
-@@ -72,7 +72,24 @@
- commas.  Valid media are \fB100baseT4\fR, \fB100baseTx-FD\fR,
- \fB100baseTx-HD\fR, \fB10baseT-FD\fR, and \fB10baseT-HD\fR.
- 
-+.SH DIAGNOSTICS
-+.TP
-+SIOCGMIIPHY on 'eth?' failed: Invalid argument
-+If the interface is not running (up), kernel will refuse to report its link state.
-+.TP
-+SIOCGMIIPHY on 'eth?' failed: Operation not permitted
-+Most kernels restrict access to root.
-+.TP
-+SIOCGMIIPHY on 'eth?' failed: No such device
-+This error is shown, if the kernel does not know about the named device.
-+.TP
-+SIOCGMIIPHY on 'eth?' failed: Operation not supported 
-+The interface in question does not support MII queries. Most likely, it does not have 
-+MII transceivers, at all.
-+
- .SH AUTHORS
- David Hinds \- dhinds@pcmcia.sourceforge.org
- .br
- Donald Becker \- becker@scyld.com
-+.br
-+Bernd Eckenfels \- ecki@debian.org
---- net-tools-1.60.orig/man/fr_FR/arp.8
-+++ net-tools-1.60/man/fr_FR/arp.8
-@@ -140,8 +140,8 @@
- Similaire à l'option 
- .B \-s
- , mais cette fois les informations d'adresses sont prises dans le fichier
--.B nom_de_fichier
--. Ceci peut être utilisé si les entrées ARP à configurer sont
-+.BR nom_de_fichier .
-+Ceci peut être utilisé si les entrées ARP à configurer sont
- nombreuses.  Le nom du fichier de données est très souvent nommé
- .B /etc/ethers
- , mais ce n'est pas officiel.
-@@ -160,8 +160,8 @@
- .LP
- Chaque entrée complète se trouvant dans le cache ARP est marquée de
- l'indicateur
--.B C
--. Les entrées permanentes sont marquées de l'indicateur
-+.BR C .
-+Les entrées permanentes sont marquées de l'indicateur
- .B M
- et les entrées 'pub' ont l'indicateur
- .B P
---- net-tools-1.60.orig/man/fr_FR/hostname.1
-+++ net-tools-1.60/man/fr_FR/hostname.1
-@@ -84,8 +84,8 @@
- .LP
- .B hostname
- fournit le nom du système tel qu'il est retourné par la fonction
--.BR getdomainname (2)
--. Ceci est connu comme nom de domaine YP/NIS du système.
-+.BR getdomainname (2).
-+Ceci est connu comme nom de domaine YP/NIS du système.
- 
- 
- .LP
-@@ -145,8 +145,8 @@
- .LP
- La façon dont vous pouvez le changer dépend de la configuration
- (habituellement dans 
--.IR /etc/host.conf )
--. Si le fichier 'hosts' est analysé avant d'interroger le DNS ou 
-+.IR /etc/host.conf ).
-+Si le fichier 'hosts' est analysé avant d'interroger le DNS ou 
- NIS) vous pouvez le changer dans le fichier 
- .IR /etc/hosts .
- 
---- net-tools-1.60.orig/man/fr_FR/ifconfig.8
-+++ net-tools-1.60/man/fr_FR/ifconfig.8
-@@ -1,4 +1,4 @@
--.TH IFCONFIG 8 "4 August 1997" "net-tools" "Linux Programmer's Manual"
-+.TH IFCONFIG 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- .SH NOM
- ifconfig \- configure une interface réseau
- .SH SYNOPSIS
-@@ -60,14 +60,14 @@
- .TP
- .B "[\-]promisc"
- Valide ou invalide le mode
--.B promiscuous
--.  S'il est validé, tous les paquets circulant sur le réseau
-+.BR promiscuous .
-+S'il est validé, tous les paquets circulant sur le réseau
- seront reçus sur cette interface.
- .TP
- .B "[\-]allmulti"
- Valide ou invalide le fonctionnement de l'interface en mode
--.B all-multicast
--.  S'il est validé, tous les paquets multicast circulant sur le réseau
-+.BR all-multicast .
-+S'il est validé, tous les paquets multicast circulant sur le réseau
- seront reçus sur cette interface.
- .TP
- .B "metric N"
-@@ -196,7 +196,7 @@
- Même si les adresses appletalk DDP et IPX peuvent être affichées,
- elles ne peuvent être modifiées avec cette commande.
- .SH VOIR AUSSI
--route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-+route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
- .SH AUTHORS
- Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
- .br
---- net-tools-1.60.orig/man/fr_FR/netstat.8
-+++ net-tools-1.60/man/fr_FR/netstat.8
-@@ -8,7 +8,7 @@
- .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
- .\"
- .\"
--.TH NETSTAT 8 "25 Fév 1999" "net-tools" "Linux Programmer's Manual"
-+.TH NETSTAT 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- 
- .SH NAME
- netstat \- Affiche les connexions réseau, les tables de routage, les
-@@ -106,7 +106,7 @@
- .BR route (8)
- pour plus de détails.
- 
--.SS "\-i, \-\-interface \fIiface\fI"
-+.SS "\-i, \-\-interfaces \fIiface\fI"
- Si vous utilisez l'option
- .BR -i ", " --interfaces
- , une table de toutes (ou de l'interface
-@@ -118,8 +118,8 @@
- .BR ifconfig (8).
- .B "netstat -ei"
- affiche une table ou une seule entrée d'interface comme la commande 
--.B ifconfig
--. Avec le paramètre
-+.BR ifconfig .
-+Avec le paramètre
- .B -a
- , vous pouvez inclure les interfaces qui ne sont pas configurées (c.a.d qui
- n'ont pas l'indicateur
-@@ -249,7 +249,7 @@
- avant d'entreprendre la fermeture.
- .TP
- .I
--CLOSED
-+CLOSE
- La socket n'est pas utilisée.
- .TP
- .I
-@@ -409,8 +409,7 @@
- Depuis la version 2.2 du noyau, netstat -i n'affiche plus les statistiques
- des interfaces alias. Pour obtenir les compteurs par interface alias, vous
- devez définir des règles spécifiques à l'aide de la commande
--.BR ipchains(8) 
--.  
-+.BR ipchains (8).
- 
- .SH FICHIERS
- .ta
---- net-tools-1.60.orig/man/fr_FR/rarp.8
-+++ net-tools-1.60/man/fr_FR/rarp.8
-@@ -55,8 +55,8 @@
- Crée manuellement une correspondance d'adresses RARP pour l'hôte
- .B nom_d_hôte
- avec l'adresse matérielle
--.B adr_materielle
--. Le format de l'adresse matérielle est dépendant du matériel,
-+.BR adr_materielle .
-+Le format de l'adresse matérielle est dépendant du matériel,
- mais pour la plupart on peut considérer que la présentation classique
- peut être utilisée.  Pour la classe Ethernet, c'est 6 octets en hexadécimal,
- séparés par des double-points.
---- net-tools-1.60.orig/man/fr_FR/route.8
-+++ net-tools-1.60/man/fr_FR/route.8
-@@ -1,4 +1,4 @@
--.TH ROUTE 8 "8 Août 1997" "net-tools" "Linux Programmer's Manual"
-+.TH ROUTE 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
- .SH NAME
- route \- affiche / manipule la table de routage IP
- .SH SYNOPSIS
-@@ -330,6 +330,6 @@
- la gestion des fenêtres et MSS pour Linux 1.1.22. Le support de irtt 
- et la fusion avec netstat ont été réalisés par Bernd Eckenfels.
- .SH AUTEUR
--Maintenu par Phil Blundell <Philip.Blundell@pobox.com>.
-+Maintenu par Phil Blundell <Philip.Blundell@pobox.com> et Bernd Eckenfels <net-tools@lina.inka.de>.
- .SH TRADUCTION
--Jean-Michel VANSTEENE (vanstee@worldnet.fr)
-+Jean-Michel VANSTEENE <vanstee@worldnet.fr>
---- net-tools-1.60.orig/man/pt_BR/ifconfig.8
-+++ net-tools-1.60/man/pt_BR/ifconfig.8
-@@ -1,4 +1,4 @@
--.TH IFCONFIG 8 "10 de fevereiro de 1996" "net-tools" "Manual do Programador Linux"
-+.TH IFCONFIG 8 "2007-12-02" "net-tools" "Manual do Programador Linux"
- .SH NOME
- ifconfig \- configura uma interface de rede
- .SH SINOPSE
-@@ -169,7 +169,7 @@
- Os endereços appletalk DDP e IPX serão mostrados, mas não podem ser alterados
- com este comando.
- .SH VEJA TAMBÉM
--route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-+route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
- .SH AUTORES
- Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
- Alan Cox, <Alan.Cox@linux.org>
---- net-tools-1.60.orig/man/pt_BR/netstat.8
-+++ net-tools-1.60/man/pt_BR/netstat.8
-@@ -8,7 +8,7 @@
- .\" Traduzido para português por Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- .\" Revisado por Jorge Luiz Godoy Filho <jorge@bestway.com.br>
- .\"
--.TH NETSTAT 8 "19 de maio de 1997" "net-tools" "Manual do Programador Linux"
-+.TH NETSTAT 8 "2007-12-02" "net-tools" "Manual do Programador Linux"
- 
- .SH NOME
- netstat \- Mostra conexões de rede, tabelas de roteamento, estatísticas de interface e conexões
-@@ -97,7 +97,7 @@
- .BR route (8)
- para maiores detalhes.
- 
--.SS "\-i, \-\-interface \fIiface\fI"
-+.SS "\-i, \-\-interfaces \fIiface\fI"
- Se você usar a opção
- .BR -i ", " --interfaces
- , uma tabela de todas (ou da
---- net-tools-1.60.orig/man/pt_BR/rarp.8
-+++ net-tools-1.60/man/pt_BR/rarp.8
-@@ -50,8 +50,8 @@
- Cria um mapeamento de endereços RARP para a máquina
- .B máquina
- com endereço de hardware configurado para
--.B endereço_hardware
--.  O formato do endereço de hardware depende da classe do hardware, mas
-+.B endereço_hardware.
-+O formato do endereço de hardware depende da classe do hardware, mas
- para a maioria das classes você pode assumir que a apresentação usual pode
- ser usada.  Para a classe Ethernet, são 6 bytes em hexadecimal, separados
- por dois pontos (:).
---- net-tools-1.60.orig/man/pt_BR/route.8
-+++ net-tools-1.60/man/pt_BR/route.8
-@@ -1,4 +1,4 @@
--.TH ROUTE 8 "27 Jan 1996" "net-tools" "Manual do Programador Linux"
-+.TH ROUTE 8 "2007-12-02" "net-tools" "Manual do Programador Linux"
- .SH NOME
- route \- mostra / manipula a tabela de roteamento IP
- .SH SINOPSE
-@@ -321,7 +321,7 @@
- Linus Torvalds para a versão pl15. Alan Cox adicionou as opções para
- mss e window no kernel 1.1.22. O suporte a irtt (compartilhado com o
- netstat) foi feito por Bernd Eckenfels.
-+.SH AUTHOR
-+Currently maintained by Phil Blundell <Philip.Blundell@pobox.com> and Bernd Eckenfels <net-tools@lina.inka.de>.
- .SH TRADUÇÃO
- Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 13/04/1998
--.SH BUGS
--nenhum :)
---- net-tools-1.60.orig/man/de_DE/ifconfig.8
-+++ net-tools-1.60/man/de_DE/ifconfig.8
-@@ -1,4 +1,4 @@
--.TH IFCONFIG 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+.TH IFCONFIG 8 "2007-12-02" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
- .SH NAME
- ifconfig \- Konfiguration einer Netzwerkskarte
- .SH SYNOPSIS
-@@ -193,7 +193,7 @@
- W\(:ahrend AppleTalk DDP und IPX Adressen angezeigt werden, k\(:onnen sie mit
- diesem Kommando nicht ge\(:andert werden.
- .SH SIEHE AUCH
--route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-+route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
- .SH AUTOREN
- Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
- .br
---- net-tools-1.60.orig/man/de_DE/route.8
-+++ net-tools-1.60/man/de_DE/route.8
-@@ -1,4 +1,4 @@
--.TH ROUTE 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+.TH ROUTE 8 "2007-12-02" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
- .SH NAME
- route \- Anzeigen der IP-Routen-Tabelle
- .SH SYNOPSIS
-@@ -345,6 +345,6 @@
- irtt beigesteuert und den Code mit dem von Netstat vereinigt.
- .SH AUTOREN
- .B Route
--wird zur Zeit von Phil Blundel (Philip.Blundell@pobox.com) gewartet.
-+wird zur Zeit von Phil Blundel <Philip.Blundell@pobox.com> und Bernd Eckenfels <net-tools@lina.inka.de> gewartet.
- .SH \(:Ubersetzung
- Ralf B\(:achle <ralf@gnu.org>
---- net-tools-1.60.orig/man/de_DE/netstat.8
-+++ net-tools-1.60/man/de_DE/netstat.8
-@@ -9,7 +9,7 @@
- .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
- .\"
- .\"
--.TH NETSTAT 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+.TH NETSTAT 8 "2007-12-02" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
- 
- .SH NAME
- netstat \- Anzeige von Netzwerksverbindungen, Routentabellen, Schnittstellenstatistiken, maskierten Verbindungen, Netlink-Nachrichten und Mitgliedschaft in Multicastgruppen
-@@ -44,7 +44,6 @@
- .B netstat
- .RB [ \-veenpac ]
- .RB { \-\-interfaces | \-i }
--.RI [ Schnittstelle ]
- 
- .PP
- 
-@@ -68,6 +67,8 @@
- .SH BESCHREIBUNG
- .B Netstat
- zeigt Informationen des Linux Netzwerkssystems an.
-+.PP
-+.B Bitte beachten Sie, dass der Inhalt der deutschen man-page nicht vollst\(:andig ist, im Moment.
- 
- .SS "(no option)"
- Ohne Optionen zeigt
-@@ -103,18 +104,17 @@
- Wegen Details siehe
- .BR route (8).
- 
--.SS "\-i, \-\-interface \fISchnittstelle\fI"
-+.SS "\-i, \-\-interfaces"
- Wird die
- .BR -i ", " --interfaces
--Option verwendet,  so wird eine Tabelle aller (oder der angegebenen
--.IR Schnittstellen ) 
-+Option verwendet,  so wird eine Tabelle aller Schnittstellen
- ausgedruckt.  Die Ausgabe ist im Format von
- .B "ifconfig -e"
- und wird in
- .BR ifconfig (8)
- beschrieben.
- .B "netstat -ei" 
--druckt eine Tabelle oder einen Eintrag f\(:ur einen einzelnes Interface wie
-+druckt eine Tabelle f\(:ur Interfaces wie
- .BR ifconfig .
- Die
- .B -a
-@@ -182,7 +182,7 @@
- und
- .BR \-\-ddp.
- 
--.SS "\-c, \-\-continous"
-+.SS "\-c, \-\-continuous"
- Mit dieser Option wiederholt
- .B netstat
- im Sekundenabstand die Ausgabe, bis es abgebrochen wird.
---- net-tools-1.60.orig/po/pt_BR.po
-+++ net-tools-1.60/po/pt_BR.po
-@@ -10,275 +10,287 @@
- msgid ""
- msgstr ""
- "Project-Id-Version: net-tools 1.54\n"
--"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
- "PO-Revision-Date: 1999-03-01 02:38+0100\n"
- "Last-Translator: Arnaldo Carvalho de Melo <acme@conectiva.com.br>\n"
- "MIME-Version: 1.0\n"
- "Content-Type: text/plain; charset=ISO8859-9\n"
- "Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:110 ../arp.c:269
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
- msgstr "arp: preciso do nome da máquina\n"
- 
--#: ../arp.c:207 ../arp.c:221
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
- msgstr "Nenhuma entrada ARP para %s\n"
- 
--#: ../arp.c:239
-+#: ../arp.c:248
- #, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr "arp: não foi possível obter o endereço de hardware para `%s': %s.\n"
- 
--#: ../arp.c:243
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr "arp: erro no tipo do protocolo.\n"
- 
--#: ../arp.c:252
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
- msgstr "arp: o dispositivo `%s' tem endereço de hardware %s `%s'.\n"
- 
--#: ../arp.c:282
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
- msgstr "arp: preciso do endereço de hardware\n"
- 
--#: ../arp.c:290
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr "arp: endereço inválido de hardware\n"
- 
--#: ../arp.c:387
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr "arp: não foi possível abrir o arquivo etherfile %s!\n"
- 
--#: ../arp.c:403
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr "arp: erro de formato na linha %u do arquivo etherfile %s!\n"
- 
--#: ../arp.c:416
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr "arp: não foi possível configurar a linha %u do arquivo etherfile %s!\n"
- 
--#: ../arp.c:437
--msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-+#: ../arp.c:448
-+#, fuzzy, c-format
-+msgid ""
-+"Address                  HWtype  HWaddress           Flags Mask            "
-+"Iface\n"
- msgstr "Endereço\t\tTipoHW\tEndereçoHW\t Flags Mascara\t\t Iface\n"
- 
--#: ../arp.c:467
-+#: ../arp.c:476
-+#, fuzzy
-+msgid "<from_interface>"
-+msgstr "%s: interface desconhecida.\n"
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
- msgstr "(incompleto)"
- 
--#: ../arp.c:484
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr "%s (%s) em "
- 
--#: ../arp.c:490
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr "<incompleto> "
- 
--#: ../arp.c:496
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr "mascara %s "
- 
--#: ../arp.c:513
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr "em %s\n"
- 
--#: ../arp.c:592
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr "Entradas: %d\tIgnorada: %d\tEncontrada: %d\n"
- 
--#: ../arp.c:596
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr "%s (%s) -- nenhuma entrada\n"
- 
--#: ../arp.c:598
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
- msgstr "arp: em %d entradas não foi encontrado.\n"
- 
--#: ../arp.c:613
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
- "cache\n"
- msgstr ""
- "Uso:\n"
--"  arp [-vn]  [<HW>] [-i <if>] [-a] [<máquina>]             <-Mostra cache "
--"ARP\n"
-+"  arp [-vn]  [<HW>] [-i <if>] [-a] [<máquina>]             <-Mostra cache ARP\n"
- 
--#: ../arp.c:614
-+#: ../arp.c:627
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
--msgstr ""
--"  arp [-v]          [-i <if>] -d  <máquina>  [pub][nopub]  <-Remove entrada "
--"ARP\n"
-+msgstr "  arp [-v]          [-i <if>] -d  <máquina>  [pub][nopub]  <-Remove entrada ARP\n"
- 
--#: ../arp.c:615
-+#: ../arp.c:628
-+#, fuzzy, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
- msgstr ""
- "  arp [-vnD] [<HW>] [-i <if>] -f  [<arquivo>]         <-Inclui entrada de "
- "arquivo\n"
- 
--#: ../arp.c:616
-+#: ../arp.c:629
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
--msgstr ""
--"  arp [-v] [<HW>] [-i <if>] -s <máquina> <end_hw> [temp][nopub] <-Inc. "
--"Entrada\n"
--
--#: ../arp.c:617
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <máquina> <end_hw>  [netmask <nm>] pub  "
--"<-''-\n"
-+msgstr "  arp [-v] [<HW>] [-i <if>] -s <máquina> <end_hw> [temp][nopub] <-Inc. Entrada\n"
- 
--#: ../arp.c:618
-+#: ../arp.c:630
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
--msgstr ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <máquina>  <if> [netmask <nm>] pub      "
--"<-''-\n"
-+msgstr "  arp [-v]   [<HW>] [-i <if>] -Ds <máquina>  <if> [netmask <nm>] pub      <-''-\n"
- 
--#: ../arp.c:620
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
--msgstr ""
--"        -a               mostra (todas as) máquinas no estilo alternativo "
--"(BSD)\n"
-+msgstr "        -a               mostra (todas as) máquinas no estilo alternativo (BSD)\n"
- 
--#: ../arp.c:621
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr "        -s, --set                define uma nova entrada ARP\n"
- 
--#: ../arp.c:622
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr "        -d, --delete             remove a entrada especificada\n"
- 
--#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr "        -v, --verbose           listagem detalhada\n"
- 
--#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
--msgid "        -n, --numeric            dont resolve names\n"
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, fuzzy, c-format
-+msgid "        -n, --numeric            don't resolve names\n"
- msgstr "        -n, --numeric           não resolve nomes\n"
- 
--#: ../arp.c:625
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
- msgstr ""
- "        -i, --device             especifica a interface de rede (ex: eth0)\n"
- 
--#: ../arp.c:626
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
- msgstr "        -D, --use-device         leia <hwaddr> de um dispositivo\n"
- 
--#: ../arp.c:627
-+#: ../arp.c:639
-+#, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr "        -A, -p, --protocol       especifica a família de protocolos\n"
- 
--#: ../arp.c:628
-+#: ../arp.c:640
-+#, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
--"        -f, --file             leia novas entradas de arquivo ou de "
--"/etc/ethers\n"
-+"        -f, --file             leia novas entradas de arquivo ou de /etc/"
-+"ethers\n"
- "\n"
- 
--#: ../arp.c:630 ../rarp.c:181
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
--msgstr ""
--" <HW>=Use '-H <hw>' para especificar o tipo de endereço de hw. Default: %s\n"
-+msgstr " <HW>=Use '-H <hw>' para especificar o tipo de endereço de hw. Default: %s\n"
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr "  Lista dos tipos de hardware possíveis (que suportam ARP):\n"
- 
--#: ../arp.c:664
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr "%s: tipo de hardware não suportado!\n"
- 
--#: ../arp.c:668
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr "%s: família de endereços não suportada!\n"
- 
--#: ../arp.c:703
-+#: ../arp.c:716
-+#, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr "arp: -N ainda não suportada.\n"
- 
--#: ../arp.c:713
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr "arp: %s: família de endereços desconhecida.\n"
- 
--#: ../arp.c:722
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr "arp: %s: tipo de hardware desconhecido.\n"
- 
--#: ../arp.c:741
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
- msgstr "arp: %s: kernel somente suporta ínet'.\n"
- 
--#: ../arp.c:746
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr "arp: %s: tipo de hardware sem suporte a ARP.\n"
- 
--#: ../hostname.c:69
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
- msgstr "Configurando nome do nó como `%s'\n"
- 
--#: ../hostname.c:74
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr "%s: você deve ser root para mudar o nome do nó\n"
- 
--#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr "%s: nome muito longo\n"
- 
--#: ../hostname.c:89
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
- msgstr "Configurando nome da máquina para `%s'\n"
- 
--#: ../hostname.c:94
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
- msgstr "%s: você deve ser root para mudar o nome da máquina\n"
- 
--#: ../hostname.c:108
-+#: ../hostname.c:109
- #, c-format
- msgid "Setting domainname to `%s'\n"
- msgstr "Configurando nome do domínio para `%s'\n"
- 
--#: ../hostname.c:113
-+#: ../hostname.c:114
- #, c-format
- msgid "%s: you must be root to change the domain name\n"
- msgstr "%s: você deve ser root para mudar o nome do domínio\n"
-@@ -303,37 +315,38 @@
- msgid "Result: h_addr_list=`%s'\n"
- msgstr "Resultado: h_addr_list=`%s'\n"
- 
--#: ../hostname.c:209
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
- msgstr "%s: não foi possível abrir `%s'\n"
- 
--#: ../hostname.c:223
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
--msgstr ""
--"Uso: hostname [-v] {máquina|-F arquivo}       configura nome da máquina (de "
--"arquivo)\n"
-+msgstr "Uso: hostname [-v] {máquina|-F arquivo}       configura nome da máquina (de arquivo)\n"
- 
--#: ../hostname.c:224
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
- msgstr ""
- "       domainname [-v] {domínio_nis|-F file} configura nome do domínio NIS\n"
- "                                             (a partir de arquivo)\n"
- 
--#: ../hostname.c:226
-+#: ../hostname.c:225
-+#, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
--msgstr ""
--"Uso: hostname [-v] {máquina|-F arquivo}   configura o nome do nó DECnet (de "
--"arquivo)\n"
-+msgstr "Uso: hostname [-v] {máquina|-F arquivo}   configura o nome do nó DECnet (de arquivo)\n"
- 
--#: ../hostname.c:228
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  mostra nome formatado\n"
- 
--#: ../hostname.c:229
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
-@@ -341,7 +354,8 @@
- "     hostname [-v]                            mostra nome da máquina\n"
- "\n"
- 
--#: ../hostname.c:230
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
-@@ -349,7 +363,8 @@
- "     hostname -V|--version|-h|--help          mostra informações e termina\n"
- "\n"
- 
--#: ../hostname.c:231
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
-@@ -357,35 +372,43 @@
- "    dnsdomainname=máquina -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- 
--#: ../hostname.c:232
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr "    -s, --short           nome curto da máquina\n"
- 
--#: ../hostname.c:233
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr "    -a, --alias           aliases para a máquina\n"
- 
--#: ../hostname.c:234
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr "    -i, --ip-address      endereços da máquina\n"
- 
--#: ../hostname.c:235
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr "    -f, --fqdn, --long    nome longo da máquina (FQDN)\n"
- 
--#: ../hostname.c:236
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
- msgstr "    -d, --domain          nome do domínio DNS\n"
- 
--#: ../hostname.c:237
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
- msgstr "    -y, --yp, --nis       nome do domínio NIS/YP\n"
- 
--#: ../hostname.c:239
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
- msgstr "    -n, --node            nome do nó DECnet\n"
- 
--#: ../hostname.c:241
-+#: ../hostname.c:240
-+#, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
-@@ -393,7 +416,8 @@
- "    -F, --file            leia o nome da máquina ou domínio NIS do arquivo\n"
- "\n"
- 
--#: ../hostname.c:243
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -413,15 +437,16 @@
- msgstr "%s: Você não pode mudar o nome do domínio DNS com este comando\n"
- 
- #: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
- msgstr ""
- "\n"
--"A menos que esteja usando bind ou NIS para resolução de nomes você pode "
--"mudar\n"
-+"A menos que esteja usando bind ou NIS para resolução de nomes você pode mudar\n"
- 
- #: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
- msgstr "o nome do domínio DNS (que é parte do FQDN) no arquivo /etc/hosts.\n"
- 
-@@ -440,552 +465,453 @@
- msgid "getnodename()=`%s'\n"
- msgstr "getnodename()=`%s'\n"
- 
--#: ../ifconfig.c:159
--#, c-format
--msgid "%-9.9s Link encap:%s  "
--msgstr "%-9.9s  Encapsulamento do Link: %s  "
-+#: ../ifconfig.c:107
-+#, fuzzy, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr "Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV Opções\n"
- 
--#: ../ifconfig.c:164
--#, c-format
--msgid "HWaddr %s  "
--msgstr "Endereço de HW %s  "
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, fuzzy, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr ""
-+"%s: erro obtendo informações da interface: %s\n"
-+"\n"
- 
--#: ../ifconfig.c:167
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
- #, c-format
--msgid "Media:%s"
--msgstr "Mídia:%s"
-+msgid "No support for INET on this system.\n"
-+msgstr "Este sistema não tem suporte a INET.\n"
- 
--#: ../ifconfig.c:169
--msgid "(auto)"
--msgstr "(auto)"
-+#: ../ifconfig.c:193
-+#, fuzzy, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr ""
-+"%s: erro obtendo informações da interface: %s\n"
-+"\n"
- 
--#: ../ifconfig.c:176
--#, c-format
--msgid "          %s addr:%s "
--msgstr "          %s end.: %s "
-+#: ../ifconfig.c:202
-+#, fuzzy, c-format
-+msgid ""
-+"Usage:\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+msgstr ""
-+"Uso:\n"
-+"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <endereço>]\n"
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:204
- #, c-format
--msgid " P-t-P:%s "
--msgstr " P-a-P:%s "
-+msgid "  [add <address>[/<prefixlen>]]\n"
-+msgstr "  [add <endereço>[/<tam_prefixo>]]\n"
- 
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:205
- #, c-format
--msgid " Bcast:%s "
--msgstr " Bcast:%s "
-+msgid "  [del <address>[/<prefixlen>]]\n"
-+msgstr "  [del <endereço>[/<tam_prefixo>]]\n"
- 
--#: ../ifconfig.c:184
-+#: ../ifconfig.c:206
- #, c-format
--msgid " Mask:%s\n"
--msgstr " Masc:%s\n"
-+msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+msgstr "  [[-]broadcast [<endereço>]]  [[-]pointopoint [<endereço>]]\n"
- 
--#: ../ifconfig.c:201
-+#: ../ifconfig.c:207
- #, c-format
--msgid "          inet6 addr: %s/%d"
--msgstr "          endereço inet6: %s/%d"
--
--#: ../ifconfig.c:203
--msgid " Scope:"
--msgstr " Escopo:"
--
--#: ../ifconfig.c:206
--msgid "Global"
--msgstr "Global"
-+msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+msgstr "  [netmask <endereço>]  [dstaddr <endereço>]  [tunnel <endereço>]\n"
- 
--#: ../ifconfig.c:209
--msgid "Link"
--msgstr "Link"
-+#: ../ifconfig.c:210
-+#, c-format
-+msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+msgstr "  [outfill <NN>] [keepalive <NN>]\n"
- 
- #: ../ifconfig.c:212
--msgid "Site"
--msgstr "Site"
--
--#: ../ifconfig.c:215
--msgid "Compat"
--msgstr "Compat"
--
--#: ../ifconfig.c:218
--msgid "Host"
--msgstr "Máquina"
--
--#: ../ifconfig.c:221
--msgid "Unknown"
--msgstr "Desconhecido"
--
--#: ../ifconfig.c:236
- #, c-format
--msgid "          IPX/Ethernet II addr:%s\n"
--msgstr "      Endereço IPX/Ethernet II:%s\n"
-+msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+msgstr "  [hw <HW> <endereço>]  [metric <NN>]  [mtu <NN>]\n"
- 
--#: ../ifconfig.c:239
-+#: ../ifconfig.c:213
- #, c-format
--msgid "          IPX/Ethernet SNAP addr:%s\n"
--msgstr "      Endereço IPX/Ethernet SNAP:%s\n"
-+msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- 
--#: ../ifconfig.c:242
-+#: ../ifconfig.c:214
- #, c-format
--msgid "          IPX/Ethernet 802.2 addr:%s\n"
--msgstr "      Endereço IPX/Ethernet 802.2:%s\n"
-+msgid "  [multicast]  [[-]promisc]\n"
-+msgstr "  [multicast]  [[-]promisc]\n"
- 
--#: ../ifconfig.c:245
-+#: ../ifconfig.c:215
- #, c-format
--msgid "          IPX/Ethernet 802.3 addr:%s\n"
--msgstr "      Endereço IPX/Ethernet 802.3:%s\n"
-+msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tipo>]\n"
- 
--#: ../ifconfig.c:255
-+#: ../ifconfig.c:217
- #, c-format
--msgid "          EtherTalk Phase 2 addr:%s\n"
--msgstr "          Endereço EtherTalk fase 2:%s\n"
-+msgid "  [txqueuelen <NN>]\n"
-+msgstr "  [txqueuelen <NN>]\n"
- 
--#: ../ifconfig.c:264
-+#: ../ifconfig.c:220
- #, c-format
--msgid "          econet addr:%s\n"
--msgstr "          Endereço econet:%s\n"
--
--#: ../ifconfig.c:270
--msgid "[NO FLAGS] "
--msgstr "[NENHUMA FLAG] "
--
--#: ../ifconfig.c:272
--msgid "UP "
--msgstr "UP "
--
--#: ../ifconfig.c:274
--msgid "BROADCAST "
--msgstr "BROADCAST"
--
--#: ../ifconfig.c:276
--msgid "DEBUG "
--msgstr "DEBUG "
--
--#: ../ifconfig.c:278
--msgid "LOOPBACK "
--msgstr "LOOPBACK"
--
--#: ../ifconfig.c:280
--msgid "POINTOPOINT "
--msgstr "POINTOPOINT "
--
--#: ../ifconfig.c:282
--msgid "NOTRAILERS "
--msgstr "NOTRAILERS "
--
--#: ../ifconfig.c:284
--msgid "RUNNING "
--msgstr "RUNNING "
-+msgid "  [[-]dynamic]\n"
-+msgstr "  [[-]dynamic]\n"
- 
--#: ../ifconfig.c:286
--msgid "NOARP "
--msgstr "NOARP "
-+#: ../ifconfig.c:222
-+#, c-format
-+msgid ""
-+"  [up|down] ...\n"
-+"\n"
-+msgstr ""
-+"  [up|down] ...\n"
-+"\n"
- 
--#: ../ifconfig.c:288
--msgid "PROMISC "
--msgstr "PROMISC "
-+#: ../ifconfig.c:224
-+#, c-format
-+msgid "  <HW>=Hardware Type.\n"
-+msgstr "  <HW>=Tipo de Hardware.\n"
- 
--#: ../ifconfig.c:290
--msgid "ALLMULTI "
--msgstr "ALLMULTI "
-+#: ../ifconfig.c:225
-+#, c-format
-+msgid "  List of possible hardware types:\n"
-+msgstr "  Lista dos tipos possíveis de hardware:\n"
- 
--#: ../ifconfig.c:292
--msgid "SLAVE "
--msgstr "SLAVE "
-+#. 1 = ARPable
-+#: ../ifconfig.c:227
-+#, c-format
-+msgid "  <AF>=Address family. Default: %s\n"
-+msgstr "  <AF>=Família de endereços. Default: %s\n"
- 
--#: ../ifconfig.c:294
--msgid "MASTER "
--msgstr "MASTER "
-+#: ../ifconfig.c:228
-+#, c-format
-+msgid "  List of possible address families:\n"
-+msgstr "  Lista de famílias de endereços possíveis:\n"
- 
--#: ../ifconfig.c:296
--msgid "MULTICAST "
--msgstr "MULTICAST "
-+#: ../ifconfig.c:303
-+#, c-format
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:299
--msgid "DYNAMIC "
--msgstr "DYNAMIC "
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:302
-+#: ../ifconfig.c:380
- #, c-format
--msgid " MTU:%d  Metric:%d"
--msgstr " MTU:%d  Métrica:%d"
-+msgid "Unknown media type.\n"
-+msgstr "Tipo desconhecido de mídia.\n"
- 
--#: ../ifconfig.c:306
-+#: ../ifconfig.c:417
- #, c-format
--msgid "  Outfill:%d  Keepalive:%d"
--msgstr "  Outfill:%d  Keepalive:%d"
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
- 
--#: ../ifconfig.c:320
-+#: ../ifconfig.c:429
- #, c-format
--msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
--msgstr "Pacotes RX:%lu erros:%lu descartados:%lu sobreposições:%lu frame:%lu\n"
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:325
-+#: ../ifconfig.c:441
- #, c-format
--msgid "             compressed:%lu\n"
--msgstr "             compactados:%lu\n"
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:329
-+#: ../ifconfig.c:465
- #, c-format
--msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
- msgstr ""
--"Pacotes TX:%lu erros:%lu descartados:%lu sobreposições:%lu portadora:%lu\n"
- 
--#: ../ifconfig.c:333
-+#: ../ifconfig.c:523
- #, c-format
--msgid "          collisions:%lu "
--msgstr "          colisões:%lu "
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:335
-+#: ../ifconfig.c:652
- #, c-format
--msgid "compressed:%lu "
--msgstr "compactados:%lu "
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:337
-+#: ../ifconfig.c:684
- #, c-format
--msgid "txqueuelen:%d "
--msgstr "txqueuelen:%d "
--
--#: ../ifconfig.c:345
--#, c-format
--msgid "Interrupt:%d "
--msgstr "IRQ:%d "
--
--#. Only print devices using it for
--#. I/O maps
--#: ../ifconfig.c:348
--#, c-format
--msgid "Base address:0x%x "
--msgstr "Endereço de E/S:0x%x "
-+msgid "hw address type `%s' has no handler to set address. failed.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:350
-+#: ../ifconfig.c:693
- #, c-format
--msgid "Memory:%lx-%lx "
--msgstr "Memória:%lx-%lx "
-+msgid "%s: invalid %s address.\n"
-+msgstr "%s: endereço %s inválido.\n"
- 
--#: ../ifconfig.c:353
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
- #, c-format
--msgid "DMA chan:%x "
--msgstr "Canal DMA:%x "
-+msgid "No support for INET6 on this system.\n"
-+msgstr "Este sistema não tem suporte a INET6.\n"
- 
--#: ../ifconfig.c:384 ../ifconfig.c:405
-+#: ../ifconfig.c:780 ../ifconfig.c:871
- #, c-format
--msgid "%s: unknown interface: %s\n"
--msgstr "%s: interface desconhecida: %s\n"
--
--#: ../ifconfig.c:421
--msgid ""
--"Usage:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
--msgstr ""
--"Uso:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <endereço>]\n"
--
--#: ../ifconfig.c:425
--msgid "  [add <address>[/<prefixlen>]]\n"
--msgstr "  [add <endereço>[/<tam_prefixo>]]\n"
--
--#: ../ifconfig.c:427
--msgid "  [del <address>[/<prefixlen>]]\n"
--msgstr "  [del <endereço>[/<tam_prefixo>]]\n"
--
--#: ../ifconfig.c:432
--msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
--msgstr "  [[-]broadcast [<endereço>]]  [[-]pointopoint [<endereço>]]\n"
--
--#: ../ifconfig.c:433
--msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
--msgstr "  [netmask <endereço>]  [dstaddr <endereço>]  [tunnel <endereço>]\n"
--
--#: ../ifconfig.c:436
--msgid "  [outfill <NN>] [keepalive <NN>]\n"
--msgstr "  [outfill <NN>] [keepalive <NN>]\n"
--
--#: ../ifconfig.c:438
--msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
--msgstr "  [hw <HW> <endereço>]  [metric <NN>]  [mtu <NN>]\n"
--
--#: ../ifconfig.c:439
--msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--
--#: ../ifconfig.c:440
--msgid "  [multicast]  [[-]promisc]\n"
--msgstr "  [multicast]  [[-]promisc]\n"
--
--#: ../ifconfig.c:441
--msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
--msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tipo>]\n"
--
--#: ../ifconfig.c:443
--msgid "  [txqueuelen <NN>]\n"
--msgstr "  [txqueuelen <NN>]\n"
--
--#: ../ifconfig.c:446
--msgid "  [[-]dynamic]\n"
--msgstr "  [[-]dynamic]\n"
--
--#: ../ifconfig.c:448
--msgid ""
--"  [up|down] ...\n"
--"\n"
-+msgid "Interface %s not initialized\n"
- msgstr ""
--"  [up|down] ...\n"
--"\n"
--
--#: ../ifconfig.c:450
--msgid "  <HW>=Hardware Type.\n"
--msgstr "  <HW>=Tipo de Hardware.\n"
--
--#: ../ifconfig.c:451
--msgid "  List of possible hardware types:\n"
--msgstr "  Lista dos tipos possíveis de hardware:\n"
--
--#. 1 = ARPable
--#: ../ifconfig.c:453
--#, c-format
--msgid "  <AF>=Address family. Default: %s\n"
--msgstr "  <AF>=Família de endereços. Default: %s\n"
--
--#: ../ifconfig.c:454
--msgid "  List of possible address families:\n"
--msgstr "  Lista de famílias de endereços possíveis:\n"
--
--#: ../ifconfig.c:593
--msgid "Unknown media type.\n"
--msgstr "Tipo desconhecido de mídia.\n"
- 
--#: ../ifconfig.c:881
--#, c-format
--msgid "%s: invalid %s address.\n"
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, fuzzy, c-format
-+msgid "Bad address.\n"
- msgstr "%s: endereço %s inválido.\n"
- 
--#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
--msgid "No support for INET6 on this system.\n"
--msgstr "Este sistema não tem suporte a INET6.\n"
--
--#: ../ifconfig.c:983
-+#: ../ifconfig.c:885
-+#, c-format
- msgid "Address deletion not supported on this system.\n"
- msgstr "Remoção de endereço não suportada neste sistema.\n"
- 
--#: ../ifconfig.c:1066
--msgid "No support for INET on this system.\n"
--msgstr "Este sistema não tem suporte a INET.\n"
-+#: ../ifconfig.c:957
-+#, fuzzy, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "Não sei como configurar endereços para a família %d.\n"
- 
--#: ../ifconfig.c:1076
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr "Este sistema não tem suporte a ECONET.\n"
- 
--#: ../ifconfig.c:1084
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr "Não sei como configurar endereços para a família %d.\n"
- 
--#: ../netstat.c:383
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
--msgstr ""
--"(Não foi possível ler informações para \"-p\": geteuid()=%d mas você deve "
--"ser root.)\n"
-+msgstr "(Não foi possível ler informações para \"-p\": geteuid()=%d mas você deve ser root.)\n"
- 
--#: ../netstat.c:387
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
- msgstr ""
--"(Nem todos os processos puderam ser identificados, informações sobre "
--"processos\n"
-+"(Nem todos os processos puderam ser identificados, informações sobre processos\n"
- " de outrem não serão mostrados, você deve ser root para vê-los todos.)\n"
- 
--#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr "OUVINDO"
- 
--#: ../netstat.c:395
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr "CONN ENVIADO"
- 
--#: ../netstat.c:396 ../netstat.c:1168
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr "DISC ENVIADO"
- 
--#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr "ESTABELECIDA"
- 
--#: ../netstat.c:419
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr "Ative sockets NET/ROM\n"
- 
--#: ../netstat.c:420
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
--msgstr ""
--"Usuário    Destino    Origem  Dispositivo Estado      Vr/Vs  Send-Q  Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
-+msgstr "Usuário    Destino    Origem  Dispositivo Estado      Vr/Vs  Send-Q  Recv-Q\n"
- 
--#: ../netstat.c:430 ../netstat.c:1208
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr "Problemas lendo dados de %s\n"
- 
--#: ../netstat.c:465
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr "SYN_ENVIADO"
- 
--#: ../netstat.c:466
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr "SYN_RECEBIDO"
- 
--#: ../netstat.c:467
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr "ESPERA_FIN1"
- 
--#: ../netstat.c:468
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr "ESPERA_FIN2"
- 
--#: ../netstat.c:469
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr "TIME_WAIT"
- 
--#: ../netstat.c:470
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr "FECHAR"
- 
--#: ../netstat.c:471
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr "ESPERANDO_FECHAR"
- 
--#: ../netstat.c:472
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr "ÚLTIMO_ACK"
- 
--#: ../netstat.c:473
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr "OUÇA"
- 
--#: ../netstat.c:474
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr "FECHANDO"
- 
--#: ../netstat.c:544
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr "atenção, recebi linha igmp6 inválida %d.\n"
- 
--#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
--#: ../netstat.c:935 ../netstat.c:940
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr "netstat: família de protocolos %d não suportada!\n"
- 
--#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr "atenção, recebi linha igmp inválida %d.\n"
- 
--#: ../netstat.c:666
-+#: ../netstat.c:677
-+#, fuzzy, c-format
-+msgid "Active X.25 sockets\n"
-+msgstr "Ativar sockets AX.25\n"
-+
-+#. IMHO, Vr/Vs is not very usefull --SF
-+#: ../netstat.c:679
-+#, fuzzy, c-format
-+msgid ""
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
-+msgstr "Destino    Origem Dispositivo Estado       Vr/Vs  Send-Q  Recv-Q\n"
-+
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr "atenção, recebi linha tcp inválida.\n"
- 
--#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr "desligado (0.00/%ld/%ld)"
- 
--#: ../netstat.c:708
-+#: ../netstat.c:804
- #, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr "em (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:713
-+#: ../netstat.c:809
- #, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr "keepalive (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:718
-+#: ../netstat.c:814
- #, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr "timewait (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr "desconh.-%d (%2.2f/%ld)"
- 
--#: ../netstat.c:799
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr "atenção, recebi linha udp inválida.\n"
- 
--#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr "DESCONHECIDA"
- 
--#: ../netstat.c:860 ../netstat.c:980
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr "ligado %d (%2.2f/%ld)"
- 
--#: ../netstat.c:949
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr "atenção, recebi linha raw inválida.\n"
- 
--#: ../netstat.c:1028
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr "atenção, recebi linha unix inválida.\n"
- 
--#: ../netstat.c:1055
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr "STREAM"
- 
--#: ../netstat.c:1059
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr "DGRAM"
- 
--#: ../netstat.c:1063
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr "RAW"
- 
--#: ../netstat.c:1067
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr "RDM"
- 
--#: ../netstat.c:1071
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
- msgstr "SEQPACKET"
- 
--#: ../netstat.c:1080
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr "LIVRE"
- 
--#: ../netstat.c:1096
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr "CONECTANDO"
- 
--#: ../netstat.c:1100
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr "CONECTADO"
- 
--#: ../netstat.c:1104
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr "DESCONECTANDO"
- 
--#: ../netstat.c:1135
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
- msgstr "Domain sockets UNIX ativos "
- 
--#: ../netstat.c:1137 ../netstat.c:1666
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr "(servidores e estabelecidas)"
- 
--#: ../netstat.c:1140 ../netstat.c:1669
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr "(sem os servidores)"
- 
--#: ../netstat.c:1142 ../netstat.c:1671
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr "(sem os servidores)"
- 
--#: ../netstat.c:1145
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
-@@ -993,114 +919,118 @@
- "\n"
- "Proto CntRef Flags       Tipo       Estado        I-Node Rota"
- 
--#: ../netstat.c:1147
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr " Caminho\n"
- 
--#: ../netstat.c:1167
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr "SABM ENVIADO"
- 
--#: ../netstat.c:1170
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr "RECUPERAÇÃO"
- 
--#: ../netstat.c:1184
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr "Ativar sockets AX.25\n"
- 
--#: ../netstat.c:1185
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr "Destino    Origem Dispositivo Estado       Vr/Vs  Send-Q  Recv-Q\n"
- 
--#: ../netstat.c:1228
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr "problemas lendo dados de %s\n"
- 
--#: ../netstat.c:1279
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
- "State"
- msgstr ""
- "Sockets IPX ativos\n"
--"Proto Recv-Q Send-Q Endereço Local             Endereço Remoto           "
--"Estado"
-+"Proto Recv-Q Send-Q Endereço Local             Endereço Remoto           Estado"
- 
--#: ../netstat.c:1281
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr " Usuário"
- 
--#: ../netstat.c:1315
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr "ESTAB"
- 
--#: ../netstat.c:1323
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr "DESC."
- 
--#: ../netstat.c:1367
--msgid "     - no statistics available -"
--msgstr "     - estatísticas não disponíveis -"
--
--#: ../netstat.c:1370
--msgid "[NO FLAGS]"
--msgstr "[SEM FLAGS]"
--
--#: ../netstat.c:1400
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
- msgstr "Tabela de Interfaces do Kernel\n"
- 
--#: ../netstat.c:1401
-+#: ../netstat.c:1465
-+#, fuzzy, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
--msgstr ""
--"Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV "
--"Opções\n"
-+msgstr "Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV Opções\n"
- 
--#: ../netstat.c:1404
-+#: ../netstat.c:1469
- msgid "missing interface information"
- msgstr "falta informação da interface"
- 
--#: ../netstat.c:1425
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
- "uso: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--help}\n"
- 
--#: ../netstat.c:1426
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr "     netstat [-vnNcaeo] [<Socket>]\n"
- 
--#: ../netstat.c:1427
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- msgstr "     netstat [-vnNcaeo] [<Socket>]\n"
- 
--#: ../netstat.c:1429
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr "        -r, --route             mostra tabela de roteamento\n"
- 
--#: ../netstat.c:1430
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr "        -i, --interfaces        mostra tabela de interfaces\n"
- 
--#: ../netstat.c:1431
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr ""
- "        -o, --timers            mostra temporizadores\n"
- "\n"
- 
--#: ../netstat.c:1432
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
- msgstr "        -i, --interfaces        mostra tabela de interfaces\n"
- 
--#: ../netstat.c:1434
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
-@@ -1108,19 +1038,38 @@
- "        -M, --masquerade        mostra conexões mascaradas\n"
- "\n"
- 
--#: ../netstat.c:1438 ../route.c:87
-+#: ../netstat.c:1505
-+#, fuzzy, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
-+msgstr "        -n, --numeric           não resolve nomes\n"
-+
-+#: ../netstat.c:1506
-+#, fuzzy, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
-+msgstr "        -n, --numeric           não resolve nomes\n"
-+
-+#: ../netstat.c:1507
-+#, fuzzy, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
-+msgstr "        -n, --numeric           não resolve nomes\n"
-+
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr "        -n, --numeric           não resolve nomes\n"
- 
--#: ../netstat.c:1439 ../route.c:88
-+#: ../netstat.c:1509 ../route.c:88
-+#, c-format
- msgid "        -e, --extend             display other/more information\n"
- msgstr "        -e, --extend             mostra outras/mais informações\n"
- 
--#: ../netstat.c:1440
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
- msgstr "        -r, --route             mostra tabela de roteamento\n"
- 
--#: ../netstat.c:1441
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
-@@ -1128,30 +1077,33 @@
- "        -c, --continuous        listagem contínua\n"
- "\n"
- 
--#: ../netstat.c:1442
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
- msgstr "        -L, --netlink           mostra mensagens netlink do kernel\n"
- 
--#: ../netstat.c:1443
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
- msgstr "        -a, --all, --listening  mostra tudo\n"
- 
--#: ../netstat.c:1444
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr ""
- "        -o, --timers            mostra temporizadores\n"
- "\n"
- 
--#: ../netstat.c:1445 ../route.c:89
-+#: ../netstat.c:1515 ../route.c:89
-+#, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
--msgstr ""
--"        -F, --fib             mostra a Base de Informações de Repasse "
--"(default)\n"
-+msgstr "        -F, --fib             mostra a Base de Informações de Repasse (default)\n"
- 
--#: ../netstat.c:1446 ../route.c:90
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
-@@ -1159,136 +1111,145 @@
- "        -C, --cache              mostra cache de roteamento no lugar da FIB\n"
- "\n"
- 
--#: ../netstat.c:1448
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- 
--#: ../netstat.c:1449 ../route.c:92
--#, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-+#: ../netstat.c:1519
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr "  <AF>=Use '-A <af>' ou [--<af>' Default: %s\n"
- 
--#: ../netstat.c:1450 ../route.c:93
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
--msgstr ""
--"  Lista das famílias de endereços possíveis (que suportam roteamento):\n"
-+msgstr "  Lista das famílias de endereços possíveis (que suportam roteamento):\n"
- 
--#: ../netstat.c:1663
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr "Conexões Internet Ativas "
- 
--#: ../netstat.c:1673
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- "\n"
--"Proto Recv-Q Send-Q Endereço Local          Endereço Remoto         Estado   "
--"  "
-+"Proto Recv-Q Send-Q Endereço Local          Endereço Remoto         Estado     "
- 
--#: ../netstat.c:1675
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr " Usuário   "
- 
--#: ../netstat.c:1678
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr " Temporizador"
- 
--#: ../netstat.c:1708
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
- msgstr "IPv4 Group Memberships\n"
- 
--#: ../netstat.c:1709
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr "Interface       CntRef Grupo\n"
- 
--#: ../rarp.c:43
-+#: ../rarp.c:44
- msgid "This kernel does not support RARP.\n"
- msgstr "Este kernel não tem suporte a RARP.\n"
- 
--#: ../rarp.c:82
-+#: ../rarp.c:83
- #, c-format
- msgid "no RARP entry for %s.\n"
- msgstr "Sem entrada RARP para %s.\n"
- 
--#: ../rarp.c:95
-+#: ../rarp.c:96
- #, c-format
- msgid "%s: bad hardware address\n"
- msgstr "%s: endereço de hardware inválido\n"
- 
--#: ../rarp.c:127
-+#: ../rarp.c:128
- #, c-format
- msgid "rarp: cannot open file %s:%s.\n"
- msgstr "rarp: não foi possível abrir o arquivo %s:%s.\n"
- 
--#: ../rarp.c:139
-+#: ../rarp.c:140
- #, c-format
- msgid "rarp: format error at %s:%u\n"
- msgstr "rarp: erro de formato em %s:%u\n"
- 
--#: ../rarp.c:143 ../rarp.c:287
-+#: ../rarp.c:144 ../rarp.c:289
- #, c-format
- msgid "rarp: %s: unknown host\n"
- msgstr "rarp: %s: máquina desconhecida\n"
- 
--#: ../rarp.c:146
-+#: ../rarp.c:147
- #, c-format
- msgid "rarp: cannot set entry from %s:%u\n"
- msgstr "rarp: não é possível incluir uma entrada para %s:%u\n"
- 
--#: ../rarp.c:175
-+#: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
- msgstr ""
- "Uso: rarp -a                                   lista entradas no cache\n"
- 
--#: ../rarp.c:176
-+#: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
--msgstr ""
--"     rarp -d máquina                           remove entrada do cache\n"
-+msgstr "     rarp -d máquina                           remove entrada do cache\n"
- 
--#: ../rarp.c:177
-+#: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
--msgstr ""
--"     rarp [-t tipo-hw] -s máquina endereço-hw  adiciona entrada ao cache\n"
-+msgstr "     rarp [-t tipo-hw] -s máquina endereço-hw  adiciona entrada ao cache\n"
- 
--#: ../rarp.c:178
-+#: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
- msgstr ""
- "       rarp -f                               adiciona entradas a partir do\n"
- "                                             arquivo ethers.\n"
- 
--#: ../rarp.c:179
-+#: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
--msgstr ""
--"     rarp -V                                   mostra versão do programa\n"
-+msgstr "     rarp -V                                   mostra versão do programa\n"
- 
--#: ../rarp.c:236
-+#: ../rarp.c:238
- #, c-format
- msgid "%s: illegal option mix.\n"
- msgstr "%s: mistura ilegal de opções.\n"
- 
--#: ../rarp.c:267
-+#: ../rarp.c:269
- #, c-format
- msgid "rarp: %s: unknown hardware type.\n"
- msgstr "rarp: %s: tipo desconhecido de hardware.\n"
- 
--#: ../route.c:79
-+#: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
--"Uso: route [-nNvee] [-FC] [famílias_de_endereços]  Lista as tabelas de "
--"rotea-\n"
-+"Uso: route [-nNvee] [-FC] [famílias_de_endereços]  Lista as tabelas de rotea-\n"
- "                                                   mento do kernel\n"
- 
--#: ../route.c:80
-+#: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
-@@ -1298,35 +1259,42 @@
- "                                                   mento da família.\n"
- "\n"
- 
--#: ../route.c:82
-+#: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
- msgstr ""
--"       route {-h|--help} [família_de_endereços]    Sintaxe para a AF "
--"(Família\n"
--"                                                   de endereços) "
--"espeficicada.\n"
-+"       route {-h|--help} [família_de_endereços]    Sintaxe para a AF (Família\n"
-+"                                                   de endereços) espeficicada.\n"
- 
--#: ../route.c:83
-+#: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
- "\n"
- msgstr ""
--"       route {-V|--version}                        Mostra a versão do "
--"comando\n"
-+"       route {-V|--version}                        Mostra a versão do comando\n"
- "                                                   e sai.\n"
- 
-+#: ../route.c:92
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>=Use '-A <af>' ou [--<af>' Default: %s\n"
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr "Uso: ifconfig [-a] [-i] [-v] interface\n"
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr "                [[família] endereço]\n"
- 
- #: ../plipconfig.c:68
-+#, c-format
- msgid "       plipconfig -V | --version\n"
- msgstr "       plipconfig -V | --version\n"
- 
-@@ -1335,25 +1303,29 @@
- msgid "%s\tnibble %lu  trigger %lu\n"
- msgstr "%s\tnibble %lu  trigger %lu\n"
- 
--#: ../iptunnel.c:79
-+#: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr "Uso: iptunnel { add | change | del | show } [ NOME ]\n"
- 
--#: ../iptunnel.c:80
-+#: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
--msgstr ""
--"          [ mode { ipip | gre | sit } ] [ remote END ] [ local END ]\n"
-+msgstr "          [ mode { ipip | gre | sit } ] [ remote END ] [ local END ]\n"
- 
--#: ../iptunnel.c:81
-+#: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- 
--#: ../iptunnel.c:82
-+#: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
- msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev DISP_FÍSICO ]\n"
- 
--#: ../iptunnel.c:83
-+#: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
-@@ -1361,451 +1333,734 @@
- "       iptunnel -V | --version\n"
- "\n"
- 
--#: ../iptunnel.c:84
-+#: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr "Onde: NAME := STRING\n"
- 
--#: ../iptunnel.c:85
-+#: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr "       END := { ENDEREÇO_IP | any }\n"
- 
--#: ../iptunnel.c:86
-+#: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr "       TOS  := { NÚMERO | inherit }\n"
- 
--#: ../iptunnel.c:87
-+#: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr "       TTL  := { 1..255 | inherit }\n"
- 
--#: ../iptunnel.c:88
-+#: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr "       KEY  := { QUATRO_NÚMEROS_SEPARADOS_POR_PONTOS | NÚMERO }\n"
- 
--#: ../iptunnel.c:326
-+#: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr "Chaves não são permitidas com ipip e sit.\n"
- 
--#: ../iptunnel.c:346
-+#: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr "Um túnel de broadcast precisa de um endereço de origem.\n"
- 
--#: ../iptunnel.c:361
-+#: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr "ttl != 0 e noptmudisc são incompatíveis\n"
- 
--#: ../iptunnel.c:373
-+#: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr "não foi possível determinar o modo do túnel (ip, gre ou sit)\n"
- 
--#: ../iptunnel.c:411
-+#: ../iptunnel.c:417
- #, c-format
- msgid "%s: %s/ip  remote %s  local %s "
- msgstr "%s: %s/ip  remoto %s  local %s "
- 
--#: ../iptunnel.c:415
-+#: ../iptunnel.c:421
- msgid "unknown"
- msgstr "Desconhecido"
- 
--#: ../iptunnel.c:447
-+#: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr "  Descarte pacotes fora de seqüência.\n"
- 
--#: ../iptunnel.c:449
-+#: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr "  É necessário checksum nos pacotes recebidos.\n"
- 
--#: ../iptunnel.c:451
-+#: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr "  Seqüencie pacotes na saída.\n"
- 
--#: ../iptunnel.c:453
-+#: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr "  Calcule o checksum para pacotes de saída.\n"
- 
--#: ../iptunnel.c:481
-+#: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
- msgstr "Formato errado de /proc/net/dev. Desculpe.\n"
- 
--#: ../iptunnel.c:494
-+#: ../iptunnel.c:500
- #, c-format
- msgid "Failed to get type of [%s]\n"
- msgstr "Não foi possível obter o tipo de [%s]\n"
- 
--#: ../iptunnel.c:510
-+#: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr "RX: Pacotes    Bytes        Erros  CsunErrs ForaSeq  Mcasts\n"
- 
--#: ../iptunnel.c:513
-+#: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr "TX: Pacotes    Bytes        Erros  DeadLoop SemRota  SemBufs\n"
- 
--#: ../statistics.c:45
-+#: ../statistics.c:47
- msgid "ICMP input histogram:"
- msgstr "Histograma de entrada ICMP:"
- 
--#: ../statistics.c:46
-+#: ../statistics.c:48
- msgid "ICMP output histogram:"
- msgstr "Histograma de saída ICMP"
- 
--#: ../statistics.c:63
-+#: ../statistics.c:65
- #, c-format
- msgid "Forwarding is %s"
- msgstr "Repassagem está %s"
- 
--#: ../statistics.c:64
--#, c-format
--msgid "Default TTL is %d"
-+#: ../statistics.c:66
-+#, fuzzy, c-format
-+msgid "Default TTL is %u"
- msgstr "Default TTL é %d"
- 
--#: ../statistics.c:65
--#, c-format
--msgid "%d total packets received"
-+#: ../statistics.c:67
-+#, fuzzy, c-format
-+msgid "%u total packets received"
- msgstr "%d total de pacotes recebidos"
- 
--#: ../statistics.c:66
--#, c-format
--msgid "%d with invalid headers"
-+#: ../statistics.c:68
-+#, fuzzy, c-format
-+msgid "%u with invalid headers"
- msgstr "%d com cabeçalhos inválidos"
- 
--#: ../statistics.c:67
--#, c-format
--msgid "%d with invalid addresses"
-+#: ../statistics.c:69
-+#, fuzzy, c-format
-+msgid "%u with invalid addresses"
- msgstr "%d com endereços inválidos"
- 
--#: ../statistics.c:68
--#, c-format
--msgid "%d forwarded"
-+#: ../statistics.c:70
-+#, fuzzy, c-format
-+msgid "%u forwarded"
- msgstr "%d repassados"
- 
--#: ../statistics.c:69
--#, c-format
--msgid "%d with unknown protocol"
-+#: ../statistics.c:71
-+#, fuzzy, c-format
-+msgid "%u with unknown protocol"
- msgstr "%d com protocolo desconhecido"
- 
--#: ../statistics.c:70
--#, c-format
--msgid "%d incoming packets discarded"
-+#: ../statistics.c:72
-+#, fuzzy, c-format
-+msgid "%u incoming packets discarded"
- msgstr "%d pacotes entrantes descartados"
- 
--#: ../statistics.c:71
--#, c-format
--msgid "%d incoming packets delivered"
-+#: ../statistics.c:73
-+#, fuzzy, c-format
-+msgid "%u incoming packets delivered"
- msgstr "%d pacotes entrantes despachados"
- 
--#: ../statistics.c:72
--#, c-format
--msgid "%d requests sent out"
-+#: ../statistics.c:74
-+#, fuzzy, c-format
-+msgid "%u requests sent out"
- msgstr "%d requisições enviadas"
- 
- #. ?
--#: ../statistics.c:73
--#, c-format
--msgid "%d outgoing packets dropped"
-+#: ../statistics.c:75
-+#, fuzzy, c-format
-+msgid "%u outgoing packets dropped"
- msgstr "%d pacotes saintes descartados"
- 
--#: ../statistics.c:74
--#, c-format
--msgid "%d dropped because of missing route"
-+#: ../statistics.c:76
-+#, fuzzy, c-format
-+msgid "%u dropped because of missing route"
- msgstr "%d descartados devido a falta de rota"
- 
--#: ../statistics.c:75
--#, c-format
--msgid "%d fragments dropped after timeout"
-+#: ../statistics.c:77
-+#, fuzzy, c-format
-+msgid "%u fragments dropped after timeout"
- msgstr "%d fragmentos descartados após estouro de tempo"
- 
--#: ../statistics.c:76
--#, c-format
--msgid "%d reassemblies required"
-+#: ../statistics.c:78
-+#, fuzzy, c-format
-+msgid "%u reassemblies required"
- msgstr "%d remontagens requeridas"
- 
- #. ?
--#: ../statistics.c:77
--#, c-format
--msgid "%d packets reassembled ok"
-+#: ../statistics.c:79
-+#, fuzzy, c-format
-+msgid "%u packets reassembled ok"
- msgstr "%d pacotes remontados sem problemas"
- 
--#: ../statistics.c:78
--#, c-format
--msgid "%d packet reassembles failed"
-+#: ../statistics.c:80
-+#, fuzzy, c-format
-+msgid "%u packet reassembles failed"
- msgstr "%d remontagens de pacotes falharam"
- 
--#: ../statistics.c:79
--#, c-format
--msgid "%d fragments received ok"
-+#: ../statistics.c:81
-+#, fuzzy, c-format
-+msgid "%u fragments received ok"
- msgstr "%d fragmentos recebidos sem problemas"
- 
--#: ../statistics.c:80
--#, c-format
--msgid "%d fragments failed"
-+#: ../statistics.c:82
-+#, fuzzy, c-format
-+msgid "%u fragments failed"
- msgstr "%d fragmentos falharam"
- 
--#: ../statistics.c:81
--#, c-format
--msgid "%d fragments created"
-+#: ../statistics.c:83
-+#, fuzzy, c-format
-+msgid "%u fragments created"
- msgstr "%d fragmentos criados"
- 
--#: ../statistics.c:86
--#, c-format
--msgid "%d ICMP messages received"
-+#: ../statistics.c:88
-+#, fuzzy, c-format
-+msgid "%u ICMP messages received"
- msgstr "%d mensagens ICMP recebidas"
- 
--#: ../statistics.c:87
--#, c-format
--msgid "%d input ICMP message failed."
-+#: ../statistics.c:89
-+#, fuzzy, c-format
-+msgid "%u input ICMP message failed."
- msgstr "%d mensagens ICMP entrantes falharam."
- 
--#: ../statistics.c:88 ../statistics.c:101
--#, c-format
--msgid "destination unreachable: %d"
-+#: ../statistics.c:90 ../statistics.c:103
-+#, fuzzy, c-format
-+msgid "destination unreachable: %u"
- msgstr "destino não alcançável: %d"
- 
--#: ../statistics.c:89
--#, c-format
--msgid "timeout in transit: %d"
-+#: ../statistics.c:91
-+#, fuzzy, c-format
-+msgid "timeout in transit: %u"
- msgstr "estouro de tempo em trânsito: %d"
- 
--#: ../statistics.c:90 ../statistics.c:103
--#, c-format
--msgid "wrong parameters: %d"
-+#: ../statistics.c:92 ../statistics.c:105
-+#, fuzzy, c-format
-+msgid "wrong parameters: %u"
- msgstr "parâmetros errados: %d"
- 
- #. ?
--#: ../statistics.c:91
--#, c-format
--msgid "source quenchs: %d"
-+#: ../statistics.c:93
-+#, fuzzy, c-format
-+msgid "source quenches: %u"
- msgstr "source quenchs: %d"
- 
--#: ../statistics.c:92
--#, c-format
--msgid "redirects: %d"
-+#: ../statistics.c:94
-+#, fuzzy, c-format
-+msgid "redirects: %u"
- msgstr "redireções: %d"
- 
--#: ../statistics.c:93
--#, c-format
--msgid "echo requests: %d"
-+#: ../statistics.c:95
-+#, fuzzy, c-format
-+msgid "echo requests: %u"
- msgstr "requisições de eco: %d"
- 
--#: ../statistics.c:94 ../statistics.c:107
--#, c-format
--msgid "echo replies: %d"
-+#: ../statistics.c:96 ../statistics.c:109
-+#, fuzzy, c-format
-+msgid "echo replies: %u"
- msgstr "respostas de eco: %d"
- 
--#: ../statistics.c:95
--#, c-format
--msgid "timestamp request: %d"
-+#: ../statistics.c:97
-+#, fuzzy, c-format
-+msgid "timestamp request: %u"
- msgstr "requisições de timestamp: %d"
- 
--#: ../statistics.c:96
--#, c-format
--msgid "timestamp reply: %d"
-+#: ../statistics.c:98
-+#, fuzzy, c-format
-+msgid "timestamp reply: %u"
- msgstr "respostas a timestamps: %d"
- 
--#: ../statistics.c:97
--#, c-format
--msgid "address mask request: %d"
-+#: ../statistics.c:99
-+#, fuzzy, c-format
-+msgid "address mask request: %u"
- msgstr "requisições de mascara de endereço: %d"
- 
- #. ?
--#: ../statistics.c:98
--msgid "address mask replies"
--msgstr "resposta a mascara de endereço"
-+#: ../statistics.c:100 ../statistics.c:113
-+#, fuzzy, c-format
-+msgid "address mask replies: %u"
-+msgstr "respostas a máscara de endereço: %d"
- 
- #. ?
--#: ../statistics.c:99
--#, c-format
--msgid "%d ICMP messages sent"
-+#: ../statistics.c:101
-+#, fuzzy, c-format
-+msgid "%u ICMP messages sent"
- msgstr "%d mensagens ICMP enviadas"
- 
--#: ../statistics.c:100
--#, c-format
--msgid "%d ICMP messages failed"
-+#: ../statistics.c:102
-+#, fuzzy, c-format
-+msgid "%u ICMP messages failed"
- msgstr "%d mensagens ICMP falharam"
- 
--#: ../statistics.c:102
--#, c-format
--msgid "time exceeded: %d"
-+#: ../statistics.c:104
-+#, fuzzy, c-format
-+msgid "time exceeded: %u"
- msgstr "tempo excedido: %d"
- 
- #. ?
--#: ../statistics.c:104
--#, c-format
--msgid "source quench: %d"
-+#: ../statistics.c:106
-+#, fuzzy, c-format
-+msgid "source quench: %u"
- msgstr "source quench: %d"
- 
--#: ../statistics.c:105
--#, c-format
--msgid "redirect: %d"
-+#: ../statistics.c:107
-+#, fuzzy, c-format
-+msgid "redirect: %u"
- msgstr "redireções: %d"
- 
--#: ../statistics.c:106
--#, c-format
--msgid "echo request: %d"
-+#: ../statistics.c:108
-+#, fuzzy, c-format
-+msgid "echo request: %u"
- msgstr "requisições de eco: %d"
- 
--#: ../statistics.c:108
--#, c-format
--msgid "timestamp requests: %d"
-+#: ../statistics.c:110
-+#, fuzzy, c-format
-+msgid "timestamp requests: %u"
- msgstr "requisições de timestamp: %d"
- 
--#: ../statistics.c:109
--#, c-format
--msgid "timestamp replies: %d"
-+#: ../statistics.c:111
-+#, fuzzy, c-format
-+msgid "timestamp replies: %u"
- msgstr "respostas a timestamp: %d"
- 
--#: ../statistics.c:110
--#, c-format
--msgid "address mask requests: %d"
-+#: ../statistics.c:112
-+#, fuzzy, c-format
-+msgid "address mask requests: %u"
- msgstr "requisições de máscara de endereço: %d"
- 
--#: ../statistics.c:111
--#, c-format
--msgid "address mask replies: %d"
--msgstr "respostas a máscara de endereço: %d"
--
--#: ../statistics.c:116
-+#: ../statistics.c:118
- #, c-format
- msgid "RTO algorithm is %s"
- msgstr "Algorítmo RTO é %s"
- 
--#: ../statistics.c:120
--#, c-format
--msgid "%d active connections openings"
-+#: ../statistics.c:122
-+#, fuzzy, c-format
-+msgid "%u active connections openings"
- msgstr "%d tentativas de conexão falharam"
- 
--#: ../statistics.c:121
--#, c-format
--msgid "%d passive connection openings"
-+#: ../statistics.c:123
-+#, fuzzy, c-format
-+msgid "%u passive connection openings"
- msgstr "%d opens passivos"
- 
--#: ../statistics.c:122
--#, c-format
--msgid "%d failed connection attempts"
-+#: ../statistics.c:124
-+#, fuzzy, c-format
-+msgid "%u failed connection attempts"
- msgstr "%d tentativas de conexão falharam"
- 
--#: ../statistics.c:123
--#, c-format
--msgid "%d connection resets received"
-+#: ../statistics.c:125
-+#, fuzzy, c-format
-+msgid "%u connection resets received"
- msgstr "%d resets de conexão recebidas"
- 
--#: ../statistics.c:124
--#, c-format
--msgid "%d connections established"
-+#: ../statistics.c:126
-+#, fuzzy, c-format
-+msgid "%u connections established"
- msgstr "%d conexões estabelecidas"
- 
--#: ../statistics.c:125
--#, c-format
--msgid "%d segments received"
-+#: ../statistics.c:127
-+#, fuzzy, c-format
-+msgid "%u segments received"
- msgstr "%d segmentos recebidos"
- 
--#: ../statistics.c:126
--#, c-format
--msgid "%d segments send out"
-+#: ../statistics.c:128
-+#, fuzzy, c-format
-+msgid "%u segments send out"
- msgstr "%d segmentos enviados"
- 
--#: ../statistics.c:127
--#, c-format
--msgid "%d segments retransmited"
-+#: ../statistics.c:129
-+#, fuzzy, c-format
-+msgid "%u segments retransmited"
- msgstr "%d segmentos retransmitidos"
- 
--#: ../statistics.c:128
--#, c-format
--msgid "%d bad segments received."
-+#: ../statistics.c:130
-+#, fuzzy, c-format
-+msgid "%u bad segments received."
- msgstr "%d segmentos ruins recebidos."
- 
--#: ../statistics.c:129
--#, c-format
--msgid "%d resets sent"
-+#: ../statistics.c:131
-+#, fuzzy, c-format
-+msgid "%u resets sent"
- msgstr "%d resets enviados"
- 
--#: ../statistics.c:134
--#, c-format
--msgid "%d packets received"
-+#: ../statistics.c:136
-+#, fuzzy, c-format
-+msgid "%u packets received"
- msgstr "%d pacotes recebidos"
- 
--#: ../statistics.c:135
--#, c-format
--msgid "%d packets to unknown port received."
-+#: ../statistics.c:137
-+#, fuzzy, c-format
-+msgid "%u packets to unknown port received."
- msgstr "%d pacotes para portas desconhecidas recebidos."
- 
--#: ../statistics.c:136
--#, c-format
--msgid "%d packet receive errors"
-+#: ../statistics.c:138
-+#, fuzzy, c-format
-+msgid "%u packet receive errors"
- msgstr "%d erros de recepção de pacotes"
- 
--#: ../statistics.c:137
--#, c-format
--msgid "%d packets sent"
-+#: ../statistics.c:139
-+#, fuzzy, c-format
-+msgid "%u packets sent"
- msgstr "%d pacotes enviados"
- 
--#: ../statistics.c:142
-+#: ../statistics.c:144
-+#, fuzzy, c-format
-+msgid "%u SYN cookies sent"
-+msgstr "%d pacotes enviados"
-+
-+#: ../statistics.c:145
-+#, fuzzy, c-format
-+msgid "%u SYN cookies received"
-+msgstr "%d pacotes recebidos"
-+
-+#: ../statistics.c:146
-+#, fuzzy, c-format
-+msgid "%u invalid SYN cookies received"
-+msgstr "%d pacotes recebidos"
-+
-+#: ../statistics.c:148
-+#, fuzzy, c-format
-+msgid "%u resets received for embryonic SYN_RECV sockets"
-+msgstr "%d resets recebidos para sockets embriônicos SYN_RECV"
-+
-+#: ../statistics.c:150
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue because of socket buffer overrun"
-+msgstr "%d pacotes retirados da fila de recepção devido a sobreposição de buffers de sockets"
-+
-+#. obsolete: 2.2.0 doesn't do that anymore
-+#: ../statistics.c:153
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue"
-+msgstr "%d pacotes retirados da fila de fora de ordem (out-of-order)"
-+
-+#: ../statistics.c:154
-+#, fuzzy, c-format
-+msgid ""
-+"%u packets dropped from out-of-order queue because of socket buffer overrun"
-+msgstr "%d pacotes descartados da fila de fora de ordem devido a sobreposição de buffers de sockets"
-+
-+#: ../statistics.c:156
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because they were out-of-window"
-+msgstr "%d pacotes ICMP descartados porque estavam fora da janela"
-+
-+#: ../statistics.c:158
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because socket was locked"
-+msgstr "%d pacotes ICMP descartadas porque o socket estava bloqueado"
-+
-+#: ../statistics.c:160
-+#, c-format
-+msgid "%u TCP sockets finished time wait in fast timer"
-+msgstr ""
-+
-+#: ../statistics.c:161
-+#, c-format
-+msgid "%u time wait sockets recycled by time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:162
-+#, c-format
-+msgid "%u TCP sockets finished time wait in slow timer"
-+msgstr ""
-+
-+#: ../statistics.c:163
-+#, c-format
-+msgid "%u passive connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:165
-+#, c-format
-+msgid "%u active connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:167
- #, c-format
--msgid "%d SYN cookies sent"
-+msgid "%u packets rejects in established connections because of timestamp"
-+msgstr ""
-+
-+#: ../statistics.c:169
-+#, fuzzy, c-format
-+msgid "%u delayed acks sent"
- msgstr "%d pacotes enviados"
- 
--#: ../statistics.c:143
-+#: ../statistics.c:170
- #, c-format
--msgid "%d SYN cookies received"
--msgstr "%d pacotes recebidos"
-+msgid "%u delayed acks further delayed because of locked socket"
-+msgstr ""
- 
--#: ../statistics.c:144
-+#: ../statistics.c:172
- #, c-format
--msgid "%d invalid SYN cookies received"
--msgstr "%d pacotes recebidos"
-+msgid "Quick ack mode was activated %u times"
-+msgstr ""
- 
--#: ../statistics.c:146
-+#: ../statistics.c:173
- #, c-format
--msgid "%d resets received for embryonic SYN_RECV sockets"
--msgstr "%d resets recebidos para sockets embriônicos SYN_RECV"
-+msgid "%u times the listen queue of a socket overflowed"
-+msgstr ""
- 
--#: ../statistics.c:148
-+#: ../statistics.c:175
- #, c-format
--msgid "%d packets pruned from receive queue because of socket buffer overrun"
-+msgid "%u SYNs to LISTEN sockets ignored"
- msgstr ""
--"%d pacotes retirados da fila de recepção devido a sobreposição de buffers de "
--"sockets"
- 
--#. obsolete: 2.2.0 doesn't do that anymore
--#: ../statistics.c:151
-+#: ../statistics.c:176
-+#, c-format
-+msgid "%u packets directly queued to recvmsg prequeue."
-+msgstr ""
-+
-+#: ../statistics.c:178
- #, c-format
--msgid "%d packets pruned from out-of-order queue"
-+msgid "%u of bytes directly received from backlog"
-+msgstr ""
-+
-+#: ../statistics.c:180
-+#, c-format
-+msgid "%u of bytes directly received from prequeue"
-+msgstr ""
-+
-+#: ../statistics.c:182
-+#, fuzzy, c-format
-+msgid "%u packets dropped from prequeue"
- msgstr "%d pacotes retirados da fila de fora de ordem (out-of-order)"
- 
--#: ../statistics.c:152
-+#: ../statistics.c:183
-+#, fuzzy, c-format
-+msgid "%u packet headers predicted"
-+msgstr "%d pacotes recebidos"
-+
-+#: ../statistics.c:184
- #, c-format
--msgid ""
--"%d packets dropped from out-of-order queue because of socket buffer overrun"
-+msgid "%u packets header predicted and directly queued to user"
- msgstr ""
--"%d pacotes descartados da fila de fora de ordem devido a sobreposição de "
--"buffers de sockets"
- 
--#: ../statistics.c:154
-+#: ../statistics.c:186
- #, c-format
--msgid "%d ICMP packets dropped because they were out-of-window"
--msgstr "%d pacotes ICMP descartados porque estavam fora da janela"
-+msgid "Ran %u times out of system memory during packet sending"
-+msgstr ""
- 
--#: ../statistics.c:156
-+#: ../statistics.c:188
-+#, fuzzy, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr "%d pacotes para portas desconhecidas recebidos."
-+
-+#: ../statistics.c:189
- #, c-format
--msgid "%d ICMP packets dropped because socket was locked"
--msgstr "%d pacotes ICMP descartadas porque o socket estava bloqueado"
-+msgid "%u predicted acknowledgments"
-+msgstr ""
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
-+
-+#: ../statistics.c:192
-+#, fuzzy, c-format
-+msgid "%u bad SACKs received"
-+msgstr "%d segmentos ruins recebidos."
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:197
-+#, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr ""
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr ""
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, fuzzy, c-format
-+msgid "%u retransmits lost"
-+msgstr "%d resets enviados"
-+
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, fuzzy, c-format
-+msgid "%u fast retransmits"
-+msgstr "%d segmentos retransmitidos"
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, fuzzy, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "%d segmentos retransmitidos"
-+
-+#: ../statistics.c:210
-+#, fuzzy, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "%d remontagens de pacotes falharam"
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, fuzzy, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr "%d pacotes retirados da fila de recepção devido a sobreposição de buffers de sockets"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, fuzzy, c-format
-+msgid "%u DSACKs received"
-+msgstr "%d pacotes recebidos"
-+
-+#: ../statistics.c:216
-+#, fuzzy, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "%d total de pacotes recebidos"
-+
-+#: ../statistics.c:217
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "%d resets de conexão recebidas"
-+
-+#: ../statistics.c:218
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "%d resets de conexão recebidas"
-+
-+#: ../statistics.c:219
-+#, fuzzy, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "%d resets de conexão recebidas"
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, fuzzy, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "%d resets de conexão recebidas"
- 
- #: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr "habilitado"
- 
--#: ../statistics.c:222
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr "desabilitado"
- 
--#: ../statistics.c:272
--#, c-format
--msgid "unknown title %s\n"
--msgstr "título %s desconhecido\n"
--
--#: ../statistics.c:298
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr "erro lendo /proc/net/snmp"
- 
--#: ../statistics.c:311
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr "não foi possível abrir /proc/net/snmp"
- 
-@@ -1819,89 +2074,95 @@
- msgid "Cannot change line discipline to `%s'.\n"
- msgstr "Não foi possível mudar a disciplina da linha para `%s'.\n"
- 
--#: ../lib/af.c:145 ../lib/hw.c:148
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr "Não Especificado"
- 
--#: ../lib/af.c:147
-+#: ../lib/af.c:155
- msgid "UNIX Domain"
- msgstr "UNIX Domain"
- 
--#: ../lib/af.c:150
-+#: ../lib/af.c:158
- msgid "DARPA Internet"
- msgstr "DARPA Internet"
- 
--#: ../lib/af.c:153
-+#: ../lib/af.c:161
- msgid "IPv6"
- msgstr "IPv6"
- 
--#: ../lib/af.c:156 ../lib/hw.c:169
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr "AX.25 AMPR"
- 
--#: ../lib/af.c:159 ../lib/hw.c:175
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr "NET/ROM AMPR"
- 
--#: ../lib/af.c:162
-+#: ../lib/af.c:170
- msgid "Novell IPX"
- msgstr "Novell IPX"
- 
--#: ../lib/af.c:165
-+#: ../lib/af.c:173
- msgid "Appletalk DDP"
- msgstr "Appletalk DDP"
- 
--#: ../lib/af.c:168 ../lib/hw.c:207
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr "Econet"
- 
--#: ../lib/af.c:171 ../lib/hw.c:172
-+#: ../lib/af.c:179
-+msgid "CCITT X.25"
-+msgstr ""
-+
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr "AMPR ROSE"
- 
--#: ../lib/af.c:174 ../lib/hw.c:160
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr "Ash"
- 
--#: ../lib/af.c:232
-+#: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr "Por favor não especifique mais que uma família de endereços.\n"
- 
--#: ../lib/af.c:293
-+#: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr "Excesso no número de famílias de endereços.\n"
- 
--#: ../lib/af.c:304
-+#: ../lib/af.c:315
- #, c-format
- msgid "Unknown address family `%s'.\n"
- msgstr "Família de endereços `%s' desconhecida.\n"
- 
--#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
--#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
--#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
--#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
--msgid "[NONE SET]"
--msgstr "[Nenhum configurado]"
--
--#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-+#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
- #, c-format
- msgid "in_arcnet(%s): invalid arcnet address!\n"
- msgstr "in_arcnet(%s): endereço arcnet inválido!\n"
- 
--#: ../lib/arcnet.c:108
-+#: ../lib/arcnet.c:97
- #, c-format
- msgid "in_arcnet(%s): trailing : ignored!\n"
- msgstr "in_arcnet(%s): trailing : ignorado!\n"
- 
--#: ../lib/arcnet.c:120
-+#: ../lib/arcnet.c:109
- #, c-format
- msgid "in_arcnet(%s): trailing junk!\n"
- msgstr "in_arcnet(%s): lixo no trailing!\n"
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
- msgstr "Endereço Ash mal formado"
- 
-+#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-+#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-+#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-+msgid "[NONE SET]"
-+msgstr "[Nenhum configurado]"
-+
- #: ../lib/ax25.c:97 ../lib/netrom.c:100
- msgid "Invalid callsign"
- msgstr "Callsign inválido"
-@@ -1911,22 +2172,21 @@
- msgstr "Callsign muito longo"
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr "O AX.25 não foi configurado neste sistema.\n"
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr "Tabela de roteamento AX.25 do kernel\n"
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr "Destino      Iface    Uso\n"
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr "Tabela de roteamento para `ddp' ainda não suportada.\n"
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1942,253 +2202,268 @@
- msgid "in_ether(%s): trailing junk!\n"
- msgstr "in_ether(%s): lixo no trailing!\n"
- 
--#: ../lib/fddi.c:95 ../lib/fddi.c:110
-+#: ../lib/fddi.c:84 ../lib/fddi.c:99
- #, c-format
- msgid "in_fddi(%s): invalid fddi address!\n"
- msgstr "in_fddi(%S): endereço fddi inválido!\n"
- 
--#: ../lib/fddi.c:122
-+#: ../lib/fddi.c:111
- #, c-format
- msgid "in_fddi(%s): trailing : ignored!\n"
- msgstr "in_fddi(%s): trailing : ignorado!\n"
- 
--#: ../lib/fddi.c:134
-+#: ../lib/fddi.c:123
- #, c-format
- msgid "in_fddi(%s): trailing junk!\n"
- msgstr "in_fddi(%s): lixo no trailing!\n"
- 
--#: ../lib/getroute.c:97 ../lib/setroute.c:76
-+#: ../lib/getroute.c:101 ../lib/setroute.c:80
- #, c-format
- msgid "Address family `%s' not supported.\n"
- msgstr "Família de endereços `%s' não suportada.\n"
- 
--#: ../lib/getroute.c:103 ../lib/setroute.c:80
-+#: ../lib/getroute.c:107 ../lib/setroute.c:84
- #, c-format
- msgid "No routing for address family `%s'.\n"
- msgstr "Nenhum roteamento para a família `%s'\n"
- 
--#: ../lib/hippi.c:96 ../lib/hippi.c:111
-+#: ../lib/hippi.c:84 ../lib/hippi.c:99
- #, c-format
- msgid "in_hippi(%s): invalid hippi address!\n"
- msgstr "in_fddi(%S): endereço fddi inválido!\n"
- 
--#: ../lib/hippi.c:123
-+#: ../lib/hippi.c:111
- #, c-format
- msgid "in_hippi(%s): trailing : ignored!\n"
- msgstr "in_fddi(%s): trailing : ignorado!\n"
- 
--#: ../lib/hippi.c:134
-+#: ../lib/hippi.c:122
- #, c-format
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr "in_fddi(%s): lixo no trailing!\n"
- 
--#: ../lib/hw.c:147
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr "Loopback Local"
- 
--#: ../lib/hw.c:150
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr "SLIP"
- 
--#: ../lib/hw.c:151
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr "SLIP VJ"
- 
--#: ../lib/hw.c:152
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr "SLIP 6 bits"
- 
--#: ../lib/hw.c:153
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr "SLIP VJ 6 bits"
- 
--#: ../lib/hw.c:154
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr "SLIP Adaptativo"
- 
--#: ../lib/hw.c:157
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr "Ethernet"
- 
--#: ../lib/hw.c:163
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr "FDDI - Fibra Ótica"
- 
--#: ../lib/hw.c:166
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr "HIPPI"
- 
--#: ../lib/hw.c:178
-+#: ../lib/hw.c:191
-+msgid "generic X.25"
-+msgstr ""
-+
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr "Túnel IPIP"
- 
--#: ../lib/hw.c:181
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
- msgstr "Protocolo Ponto-a-Ponto"
- 
--#: ../lib/hw.c:184
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr "(Cisco)-HDLC"
- 
--#: ../lib/hw.c:185
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:188
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr "ARCnet"
- 
--#: ../lib/hw.c:191
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr "Frame Relay DLCI"
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr "FRAD - Dispositivo de Acesso a Frame Relay"
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr "IPv6 sobre IPv4"
- 
--#: ../lib/hw.c:198
-+#: ../lib/hw.c:214
- msgid "IrLAP"
- msgstr "IrLAP"
- 
--#: ../lib/hw.c:201
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr "16/4 Mbps Token Ring"
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:219
- msgid "16/4 Mbps Token Ring (New)"
- msgstr "16/4 Mbps Token Ring (Novo)"
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
- msgstr "rresolve: família de endereços %d não suportada!\n"
- 
--#: ../lib/inet6_gr.c:79
-+#: ../lib/inet6.c:131
-+#, fuzzy
-+msgid "[UNKNOWN]"
-+msgstr "DESCONHECIDA"
-+
-+#: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr "NET/ROM não configurado neste sistema.\n"
- 
--#: ../lib/inet6_gr.c:82
-+#: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
- msgstr "Tabela de Roteamento IPv6 do Kernel\n"
- 
--#: ../lib/inet6_gr.c:84
-+#: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
--msgstr ""
--"Destino                                     Próximo \"Hop\"                  "
--"        Opções Métrica Ref   Uso Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
-+msgstr "Destino                                     Próximo \"Hop\"                          Opções Métrica Ref   Uso Iface\n"
- 
--#: ../lib/inet6_gr.c:158
-+#: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr "Cache de Vizinhos IPv6 do Kernel\n"
- 
--#: ../lib/inet6_gr.c:161
-+#: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
--msgstr ""
--"Vizinho                                     Endereço HW       Iface   Opções "
--"Estado Ref\n"
-+msgstr "Vizinho                                     Endereço HW       Iface   Opções Estado Ref\n"
- 
--#: ../lib/inet6_gr.c:165
-+#: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
- msgstr ""
--"Vizinho                                     Endereço HW       Iface   Opções "
--"Estado Ref\n"
-+"Vizinho                                     Endereço HW       Iface   Opções Estado Ref\n"
- "       Parado(seg) Remover(seg)\n"
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr "Uso: inet6_route [-vF] del Destino\n"
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr "       inet6_route [-vF] add Destino [gw Gw] [metric M] [[dev] If]\n"
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr "       inet6_route [-FC] flush      NÃO suportado\n"
- 
--#: ../lib/inet6_sr.c:182
-+#: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
- msgstr "Limpeza da tabela de roteamento `inet6' não é suportada\n"
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr "NET/ROM não configurado neste sistema.\n"
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
- msgstr "Tabela de Roteamento IP do Kernel\n"
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
--msgstr ""
--"Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso "
--"Iface\n"
-+msgstr "Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso Iface\n"
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
--msgstr ""
--"Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt "
--"Iface\n"
-+msgstr "Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt Iface\n"
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
--msgstr ""
--"Destino         Roteador        MáscaraGen     Opções Métrica Ref   Uso "
--"Iface    MSS   Janela irtt\n"
-+msgstr "Destino         Roteador        MáscaraGen     Opções Métrica Ref   Uso Iface    MSS   Janela irtt\n"
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
- msgstr "Tabela de Roteamento IP do Kernel\n"
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
--msgstr ""
--"Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso "
--"Iface\n"
-+msgstr "Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso Iface\n"
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
--msgstr ""
--"Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt "
--"Iface\n"
-+msgstr "Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt Iface\n"
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
--msgstr ""
--"Destino         Roteador        Origem         Opções Métrica Ref   Uso "
--"Iface    MSS   Janela irtt   HH  Arp\n"
-+msgstr "Destino         Roteador        Origem         Opções Métrica Ref   Uso Iface    MSS   Janela irtt   HH  Arp\n"
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
--msgstr ""
--"Destino         Roteador        Origem         Opções Métrica Ref   Uso "
--"Iface    MSS   Janela irtt   HH  Arp\n"
-+msgstr "Destino         Roteador        Origem         Opções Métrica Ref   Uso Iface    MSS   Janela irtt   HH  Arp\n"
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
-@@ -2196,31 +2471,36 @@
- "Uso: inet_route [-vF] del {-host|-net} Destino[/prefixo] [gw Gw] [metric M] "
- "[[dev] If]\n"
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Destino[/prefixo] [gw Gw] [metric "
- "M]\n"
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Destino[/prefixo] [metric M] "
- "reject\n"
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr "       inet_route [-FC] flush      NÃO suportado\n"
- 
-@@ -2230,14 +2510,17 @@
- msgstr "route: %s: não é possível usar uma REDE como roteador!\n"
- 
- #: ../lib/inet_sr.c:174
-+#, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr "route: MSS inválido.\n"
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr "route: janela inválida.\n"
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr "route: rtt inicial inválido.\n"
- 
-@@ -2252,75 +2535,92 @@
- msgstr "route: netmask %s inválida\n"
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr "route: a netmask não casa com o endereço de rede\n"
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
- msgstr "Não é suportado limpar a tabela de roteamento `inet'\n"
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
- msgstr "Não é suportado modificar o cache de roteamento `inet'\n"
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr "O AX.25 não foi configurado neste sistema.\n"
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
- msgstr "Tabela de roteamento IPX do kernel\n"
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
- msgstr "Destino                   Rede Roteadora            Nó Roteador\n"
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
- msgstr "NET/ROM: isto precisa ser escrito\n"
- 
--#: ../lib/masq_info.c:197
-+#: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr "Entradas de IP mascarado\n"
- 
--#: ../lib/masq_info.c:200
-+#: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr "prot   expira origem               destino             portas\n"
- 
--#: ../lib/masq_info.c:203
-+#: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
--"prot   expira    initseq delta prevd origem               destino            "
--" portas\n"
-+"prot   expira    initseq delta prevd origem               "
-+"destino             portas\n"
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr "NET/ROM não configurado neste sistema.\n"
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
- msgstr "Tabela de roteamento NET/ROM do kernel\n"
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr "Destino      Mnemônico Qualidade Vizinho   Iface\n"
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
- msgstr "uso de netrom\n"
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
- msgstr "NET/ROM: isto precisa ser escrito\n"
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr "Você não pode iniciar o PPP com este programa.\n"
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
- msgstr "Desculpe, use o pppd!\n"
- 
-@@ -2329,51 +2629,314 @@
- msgstr "Endereço do nó deve ter dez dígitos"
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr "ROSE não configurada neste sistema.\n"
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
- msgstr "Tabela de roteamento ROSE do kernel\n"
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr "in_tr(%s): endereço token ring inválido!\n"
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr "in_tr(%s): trailing : ignorado!\n"
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr "in_tr(%s): lixo no trailing!\n"
- 
--#: ../lib/interface.c:124
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
- msgstr "atenção: nenhum socket inet disponível: %s\n"
- 
--#: ../lib/interface.c:270
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr "Atenção: não foi possível abrir %s (%s). Saída limitada.\n"
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:504
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr "%s: dispositivo não encontrado"
- 
--#: ../lib/interface.c:508
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
-+msgstr "%s: erro obtendo informações da interface: %s\n"
-+
-+#: ../lib/interface.c:608
-+msgid "     - no statistics available -"
-+msgstr "     - estatísticas não disponíveis -"
-+
-+#: ../lib/interface.c:612
-+#, c-format
-+msgid "[NO FLAGS]"
-+msgstr "[SEM FLAGS]"
-+
-+#: ../lib/interface.c:688
-+#, c-format
-+msgid "%-9.9s Link encap:%s  "
-+msgstr "%-9.9s  Encapsulamento do Link: %s  "
-+
-+#: ../lib/interface.c:693
-+#, c-format
-+msgid "HWaddr %s  "
-+msgstr "Endereço de HW %s  "
-+
-+#: ../lib/interface.c:696
-+#, c-format
-+msgid "Media:%s"
-+msgstr "Mídia:%s"
-+
-+#: ../lib/interface.c:698
-+#, c-format
-+msgid "(auto)"
-+msgstr "(auto)"
-+
-+#: ../lib/interface.c:705
-+#, c-format
-+msgid "          %s addr:%s "
-+msgstr "          %s end.: %s "
-+
-+#: ../lib/interface.c:708
-+#, c-format
-+msgid " P-t-P:%s "
-+msgstr " P-a-P:%s "
-+
-+#: ../lib/interface.c:711
-+#, c-format
-+msgid " Bcast:%s "
-+msgstr " Bcast:%s "
-+
-+#: ../lib/interface.c:713
-+#, c-format
-+msgid " Mask:%s\n"
-+msgstr " Masc:%s\n"
-+
-+#: ../lib/interface.c:730
-+#, c-format
-+msgid "          inet6 addr: %s/%d"
-+msgstr "          endereço inet6: %s/%d"
-+
-+#: ../lib/interface.c:732
-+#, c-format
-+msgid " Scope:"
-+msgstr " Escopo:"
-+
-+#: ../lib/interface.c:735
-+#, c-format
-+msgid "Global"
-+msgstr "Global"
-+
-+#: ../lib/interface.c:738
-+#, c-format
-+msgid "Link"
-+msgstr "Link"
-+
-+#: ../lib/interface.c:741
-+#, c-format
-+msgid "Site"
-+msgstr "Site"
-+
-+#: ../lib/interface.c:744
-+#, c-format
-+msgid "Compat"
-+msgstr "Compat"
-+
-+#: ../lib/interface.c:747
-+#, c-format
-+msgid "Host"
-+msgstr "Máquina"
-+
-+#: ../lib/interface.c:750
-+#, c-format
-+msgid "Unknown"
-+msgstr "Desconhecido"
-+
-+#: ../lib/interface.c:765
-+#, c-format
-+msgid "          IPX/Ethernet II addr:%s\n"
-+msgstr "      Endereço IPX/Ethernet II:%s\n"
-+
-+#: ../lib/interface.c:768
-+#, c-format
-+msgid "          IPX/Ethernet SNAP addr:%s\n"
-+msgstr "      Endereço IPX/Ethernet SNAP:%s\n"
-+
-+#: ../lib/interface.c:771
-+#, c-format
-+msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+msgstr "      Endereço IPX/Ethernet 802.2:%s\n"
-+
-+#: ../lib/interface.c:774
-+#, c-format
-+msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+msgstr "      Endereço IPX/Ethernet 802.3:%s\n"
-+
-+#: ../lib/interface.c:784
-+#, c-format
-+msgid "          EtherTalk Phase 2 addr:%s\n"
-+msgstr "          Endereço EtherTalk fase 2:%s\n"
-+
-+#: ../lib/interface.c:793
-+#, c-format
-+msgid "          econet addr:%s\n"
-+msgstr "          Endereço econet:%s\n"
-+
-+#: ../lib/interface.c:800
-+#, c-format
-+msgid "[NO FLAGS] "
-+msgstr "[NENHUMA FLAG] "
-+
-+#: ../lib/interface.c:802
-+#, c-format
-+msgid "UP "
-+msgstr "UP "
-+
-+#: ../lib/interface.c:804
-+#, c-format
-+msgid "BROADCAST "
-+msgstr "BROADCAST"
-+
-+#: ../lib/interface.c:806
-+#, c-format
-+msgid "DEBUG "
-+msgstr "DEBUG "
-+
-+#: ../lib/interface.c:808
-+#, c-format
-+msgid "LOOPBACK "
-+msgstr "LOOPBACK"
-+
-+#: ../lib/interface.c:810
-+#, c-format
-+msgid "POINTOPOINT "
-+msgstr "POINTOPOINT "
-+
-+#: ../lib/interface.c:812
-+#, c-format
-+msgid "NOTRAILERS "
-+msgstr "NOTRAILERS "
-+
-+#: ../lib/interface.c:814
-+#, c-format
-+msgid "RUNNING "
-+msgstr "RUNNING "
-+
-+#: ../lib/interface.c:816
-+#, c-format
-+msgid "NOARP "
-+msgstr "NOARP "
-+
-+#: ../lib/interface.c:818
-+#, c-format
-+msgid "PROMISC "
-+msgstr "PROMISC "
-+
-+#: ../lib/interface.c:820
-+#, c-format
-+msgid "ALLMULTI "
-+msgstr "ALLMULTI "
-+
-+#: ../lib/interface.c:822
-+#, c-format
-+msgid "SLAVE "
-+msgstr "SLAVE "
-+
-+#: ../lib/interface.c:824
-+#, c-format
-+msgid "MASTER "
-+msgstr "MASTER "
-+
-+#: ../lib/interface.c:826
-+#, c-format
-+msgid "MULTICAST "
-+msgstr "MULTICAST "
-+
-+#: ../lib/interface.c:829
-+#, c-format
-+msgid "DYNAMIC "
-+msgstr "DYNAMIC "
-+
-+#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+#: ../lib/interface.c:832
-+#, c-format
-+msgid " MTU:%d  Metric:%d"
-+msgstr " MTU:%d  Métrica:%d"
-+
-+#: ../lib/interface.c:836
-+#, c-format
-+msgid "  Outfill:%d  Keepalive:%d"
-+msgstr "  Outfill:%d  Keepalive:%d"
-+
-+#: ../lib/interface.c:850
-+#, fuzzy, c-format
-+msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgstr "Pacotes RX:%lu erros:%lu descartados:%lu sobreposições:%lu frame:%lu\n"
-+
-+#: ../lib/interface.c:855
-+#, c-format
-+msgid "             compressed:%lu\n"
-+msgstr "             compactados:%lu\n"
-+
-+#: ../lib/interface.c:895
-+#, fuzzy, c-format
-+msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgstr "Pacotes TX:%lu erros:%lu descartados:%lu sobreposições:%lu portadora:%lu\n"
-+
-+#: ../lib/interface.c:899
-+#, c-format
-+msgid "          collisions:%lu "
-+msgstr "          colisões:%lu "
-+
-+#: ../lib/interface.c:901
-+#, c-format
-+msgid "compressed:%lu "
-+msgstr "compactados:%lu "
-+
-+#: ../lib/interface.c:903
-+#, c-format
-+msgid "txqueuelen:%d "
-+msgstr "txqueuelen:%d "
-+
-+#: ../lib/interface.c:905
-+#, c-format
-+msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
- msgstr ""
--"%s: erro obtendo informações da interface: %s\n"
--"\n"
- 
--#: ../lib/sockets.c:59
-+#: ../lib/interface.c:916
-+#, c-format
-+msgid "Interrupt:%d "
-+msgstr "IRQ:%d "
-+
-+#. Only print devices using it for
-+#. I/O maps
-+#: ../lib/interface.c:919
-+#, c-format
-+msgid "Base address:0x%x "
-+msgstr "Endereço de E/S:0x%x "
-+
-+#: ../lib/interface.c:921
-+#, c-format
-+msgid "Memory:%lx-%lx "
-+msgstr "Memória:%lx-%lx "
-+
-+#: ../lib/interface.c:924
-+#, c-format
-+msgid "DMA chan:%x "
-+msgstr "Canal DMA:%x "
-+
-+#: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr "Nenhuma família de endereços que possa ser usada foi encontrada.\n"
- 
-@@ -2397,29 +2960,32 @@
- msgid "ip: argument is wrong: %s\n"
- msgstr "ip: argumento errado: %s\n"
- 
--#: ../ipmaddr.c:56
-+#: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr "Uso: ipmaddr [ add | del ] ENDMULTI dev STRING\n"
- 
--#: ../ipmaddr.c:57
-+#: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- 
--#: ../ipmaddr.c:58
-+#: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr "       ipmaddr -V | -version\n"
- 
--#: ../ipmaddr.c:258
-+#: ../ipmaddr.c:263
- #, c-format
- msgid "family %d "
- msgstr "família %d "
- 
--#: ../ipmaddr.c:267
-+#: ../ipmaddr.c:272
- #, c-format
- msgid " users %d"
- msgstr " usuários %d"
- 
--#: ../ipmaddr.c:353
-+#: ../ipmaddr.c:358
- msgid "Cannot create socket"
- msgstr "Não foi possível criar o socket"
- 
-@@ -2434,6 +3000,7 @@
- msgstr "slattach: tty_lock: (%s): %s\n"
- 
- #: ../slattach.c:192
-+#, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr "slattach: não foi possível escrever o arquivo PID\n"
- 
-@@ -2452,39 +3019,69 @@
- msgid "slattach: tty_hangup(RAISE): %s\n"
- msgstr "slattach: tty_hangup(RAISE): %s\n"
- 
--#: ../slattach.c:486
-+#: ../slattach.c:468
-+#, fuzzy, c-format
-+msgid "slattach: tty name too long\n"
-+msgstr "%s: nome muito longo\n"
-+
-+#: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr "slattach: tty_open: não foi possível obter o estado corrente!\n"
- 
--#: ../slattach.c:493
-+#: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
--msgstr ""
--"slattach: tty_open: não foi possível obter a disciplina de linha corrente!\n"
-+msgstr "slattach: tty_open: não foi possível obter a disciplina de linha corrente!\n"
- 
--#: ../slattach.c:501
-+#: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr "slattach: tty_open: não foi possível configurar o modo RAW!\n"
- 
--#: ../slattach.c:508
-+#: ../slattach.c:520
- #, c-format
- msgid "slattach: tty_open: cannot set %s bps!\n"
- msgstr "slattach: tty_open: não foi possível configurar %s bps!\n"
- 
--#: ../slattach.c:518
-+#: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr "slattach: tty_open: não foi possível configurar modo 8N1!\n"
- 
--#: ../slattach.c:686
-+#: ../slattach.c:672
-+#, c-format
-+msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+msgstr ""
-+
-+#: ../slattach.c:704
- #, c-format
- msgid "%s started"
- msgstr "%s inicializado"
- 
--#: ../slattach.c:687
-+#: ../slattach.c:705
- #, c-format
- msgid " on %s"
- msgstr " em %s"
- 
--#: ../slattach.c:688
-+#: ../slattach.c:706
- #, c-format
- msgid " interface %s\n"
- msgstr "%s: interface desconhecida.\n"
-+
-+#~ msgid ""
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+#~ "<-''-\n"
-+#~ msgstr "  arp [-v]   [<HW>] [-i <if>] -s  <máquina> <end_hw>  [netmask <nm>] pub  <-''-\n"
-+
-+#~ msgid "%s: unknown interface: %s\n"
-+#~ msgstr "%s: interface desconhecida: %s\n"
-+
-+#~ msgid "address mask replies"
-+#~ msgstr "resposta a mascara de endereço"
-+
-+#~ msgid "unknown title %s\n"
-+#~ msgstr "título %s desconhecido\n"
-+
-+#~ msgid "Routing table for `ddp' not yet supported.\n"
-+#~ msgstr "Tabela de roteamento para `ddp' ainda não suportada.\n"
---- net-tools-1.60.orig/po/Makefile
-+++ net-tools-1.60/po/Makefile
-@@ -3,13 +3,13 @@
- INSTALL_DATA= ${INSTALL} -m 644
- INSTALLNLSDIR=${BASEDIR}/usr/share/locale
- 
--TUPDATE = tupdate
-+TUPDATE = msgmerge
- 
- NLSPACKAGE = net-tools
- 
- -include ../config.make
- ifeq ($(I18N),1)
--CATALOGS = de.mo fr.mo pt_BR.mo et_EE.mo cs.mo
-+CATALOGS = de.mo fr.mo pt_BR.mo et_EE.mo cs.mo ja.mo
- else
- CATALOGS =
- endif
-@@ -49,7 +49,7 @@
- 		lang=`echo $$cat | sed 's/.mo//'`; \
- 		mv $$lang.po $$lang.old.po; \
- 		echo "$$lang:"; \
--		if $(TUPDATE) $(NLSPACKAGE).pot $$lang.old.po > $$lang.po; then \
-+		if $(TUPDATE) $$lang.old.po $(NLSPACKAGE).pot > $$lang.po; then \
- 		rm -f $$lang.old.po; \
- 	else \
- 	 	echo "tupdate for $$cat failed!"; \
---- net-tools-1.60.orig/po/et_EE.po
-+++ net-tools-1.60/po/et_EE.po
-@@ -6,7 +6,8 @@
- msgid ""
- msgstr ""
- "Project-Id-Version: net-tools 1.58\n"
--"POT-Creation-Date: 2001-02-15 21:28+0200\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
- "PO-Revision-Date: 2001-02-15 18:00+0300\n"
- "Last-Translator: Meelis Roos <mroos@linux.ee>\n"
- "Language-Team: Estonian <linux-ee@eenet.ee>\n"
-@@ -14,53 +15,58 @@
- "Content-Type: text/plain; charset=iso-8859-15\n"
- "Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:110 ../arp.c:269
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
- msgstr "arp: puudub hosti nimi\n"
- 
--#: ../arp.c:207 ../arp.c:221
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
- msgstr "%s jaoks pole ARP kirjet\n"
- 
--#: ../arp.c:239
-+#: ../arp.c:248
- #, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr "arp: ei saa riistvaralist aadressi `%s' jaoks: %s\n"
- 
--#: ../arp.c:243
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr "arp: vale protokolli tüüp\n"
- 
--#: ../arp.c:252
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
- msgstr "arp: seadmel `%s' on riistvaraline aadress %s `%s'\n"
- 
--#: ../arp.c:282
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
- msgstr "arp: puudub riistvaraline aadress\n"
- 
--#: ../arp.c:290
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr "arp: vigane riistvaraline aadress\n"
- 
--#: ../arp.c:387
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr "arp: ei saa avada faili %s\n"
- 
--#: ../arp.c:403
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr "arp: formaadiviga real %u failis %s\n"
- 
--#: ../arp.c:416
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr "arp: ei saa kehtestada ARP kirjet real %u failis %s\n"
- 
--#: ../arp.c:437
-+#: ../arp.c:448
-+#, c-format
- msgid ""
- "Address                  HWtype  HWaddress           Flags Mask            "
- "Iface\n"
-@@ -68,45 +74,52 @@
- "Aadress                  HWtüüp  HWaadress           Lipud Mask            "
- "Liides\n"
- 
--#: ../arp.c:467
-+#: ../arp.c:476
-+#, fuzzy
-+msgid "<from_interface>"
-+msgstr " liides %s\n"
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
- msgstr "(mittetäielik)"
- 
--#: ../arp.c:484
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr "%s (%s) aadressil "
- 
--#: ../arp.c:490
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr "<mittetäielik>"
- 
--#: ../arp.c:496
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr "võrgumask %s "
- 
--#: ../arp.c:513
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr "liides %s\n"
- 
--#: ../arp.c:592
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr "ARP kirjeid kokku: %s\tignoreerisin: %d\tleidsin: %d\n"
- 
--#: ../arp.c:596
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr "%s (%s) -- pole kirjet\n"
- 
--#: ../arp.c:598
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
- msgstr "arp: ei leidnud %d kirje hulgast sobivat\n"
- 
--#: ../arp.c:613
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-@@ -116,47 +129,45 @@
- "ARP cache vaatamine:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hosti nimi>]\n"
- 
--#: ../arp.c:614
-+#: ../arp.c:627
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
- msgstr ""
- "ARP kirje kustutamine:\n"
- "  arp [-v]          [-i <if>] -d  <hosti nimi> [pub] [nopub]\n"
- 
--#: ../arp.c:615
-+#: ../arp.c:628
-+#, fuzzy, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
- msgstr ""
- "ARP kirjete lisamine failist:\n"
- "  arp [-vnD] [<HW>] [-i <if>] -f  [<failinimi>]\n"
- 
--#: ../arp.c:616
-+#: ../arp.c:629
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
- msgstr ""
- "ARP kirje lisamine:\n"
- "  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [temp] [nopub]\n"
- 
--#: ../arp.c:617
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [netmask <nm>] pub\n"
--
--#: ../arp.c:618
-+#: ../arp.c:630
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
- msgstr ""
- "  arp [-v]   [<HW>] [-i <if>] -Ds <hosti nimi> <if> [netmask <nm>] pub\n"
- "\n"
- 
--#: ../arp.c:620
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
-@@ -164,122 +175,132 @@
- "        -a                       näita kõiki hoste alternatiivsel (BSD) "
- "kujul\n"
- 
--#: ../arp.c:621
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr "        -s, --set                uue ARP kirje seadmine\n"
- 
--#: ../arp.c:622
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr "        -d, --delete             määratud kirje kustutamine\n"
- 
--#: ../arp.c:623 ../netstat.c:1485 ../route.c:85
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr "        -v, --verbose            jutukas väljund\n"
- 
--#: ../arp.c:624
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, c-format
- msgid "        -n, --numeric            don't resolve names\n"
- msgstr "        -n, --numeric            mitte lahendada nimesid\n"
- 
--#: ../arp.c:625
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
- msgstr ""
- "        -i, --device             võrguliidese täpsustamine (näiteks eth0)\n"
- 
--#: ../arp.c:626
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
- msgstr "        -D, --use-device         lugeda <hwaddr> vastavalt liideselt\n"
- 
--#: ../arp.c:627
-+#: ../arp.c:639
-+#, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr "        -A, -p, --protocol       protokollipere määramine\n"
- 
--#: ../arp.c:628
-+#: ../arp.c:640
-+#, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
--"        -f, --file               lugeda kirjed antud failist või "
--"/etc/ethers'st\n"
-+"        -f, --file               lugeda kirjed antud failist või /etc/"
-+"ethers'st\n"
- "\n"
- 
--#: ../arp.c:630 ../rarp.c:181
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
- msgstr ""
- "  <HW>=kasutage '-H <hw>' riistvaralise aadressi määramiseks.\n"
- "       Vaikimisi: %s\n"
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr "  Võimalike ARP-i toetavate riistvara tüüpide nimekiri:\n"
- 
--#: ../arp.c:664 ../arp.c:749
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr "arp: riistvara tüüpi %s ei toetata\n"
- 
--#: ../arp.c:668
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr "arp: aadressiperekonda %s ei toetata\n"
- 
--#: ../arp.c:703
-+#: ../arp.c:716
-+#, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr "arp: -N toetust pole veel\n"
- 
--#: ../arp.c:713
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr "arp: tundmatu aadressiperekond %s\n"
- 
--#: ../arp.c:722
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr "arp: tundmatu riistvara tüüp %s\n"
- 
--#: ../arp.c:741
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
- msgstr "arp: tuumas on ainult 'inet' aadressiperekonna toetus\n"
- 
--#: ../arp.c:754
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr "arp: riistvara tüübil %s pole ARP toetust\n"
- 
--#: ../hostname.c:69
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
- msgstr "Sean sõlme nimeks `%s'\n"
- 
--#: ../hostname.c:74
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr "%s: ainult root saab sõlme nime muuta\n"
- 
--#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr "%s: nimi on liiga pikk\n"
- 
--#: ../hostname.c:89
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
- msgstr "Sean hosti nimeks `%s'\n"
- 
--#: ../hostname.c:94
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
- msgstr "%s: ainult root saab hosti nime muuta\n"
- 
--#: ../hostname.c:108
-+#: ../hostname.c:109
- #, c-format
- msgid "Setting domainname to `%s'\n"
- msgstr "Sean domeeni nimeks `%s'\n"
- 
--#: ../hostname.c:113
-+#: ../hostname.c:114
- #, c-format
- msgid "%s: you must be root to change the domain name\n"
- msgstr "%s: ainult root saab domeeni nime muuta\n"
-@@ -304,25 +325,28 @@
- msgid "Result: h_addr_list=`%s'\n"
- msgstr "Tulemus: h_addr_list=`%s'\n"
- 
--#: ../hostname.c:209
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
- msgstr "%s: ei saa avada faili `%s'\n"
- 
--#: ../hostname.c:223
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
- msgstr ""
- "Kasutamine:\n"
- "  hostname [-v] {hosti nimi|-F fail}         hosti nime seadmine (ka "
- "failist)\n"
- 
--#: ../hostname.c:224
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
- msgstr ""
- "  domainname [-v] {nisdomeen|-F fail}        NIS domeeni nime seadmine\n"
- 
--#: ../hostname.c:226
-+#: ../hostname.c:225
-+#, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
-@@ -330,18 +354,21 @@
- "  nodename [-v] {nodename|-F fail}           DECneti võrgusõlme nime "
- "seadmine\n"
- 
--#: ../hostname.c:228
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr ""
- "  hostname [-v] [-d|-f|-s|-a|-i|-y|-n]       nime näitamine antud formaadis\n"
- 
--#: ../hostname.c:229
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
- msgstr "  hostname [-v]                              hosti nime näitamine\n"
- 
--#: ../hostname.c:230
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
-@@ -350,7 +377,8 @@
- "  hostname -h|--help                         seesama abiinfo\n"
- "\n"
- 
--#: ../hostname.c:231
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
-@@ -358,36 +386,44 @@
- "  dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- 
--#: ../hostname.c:232
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr "    -s, --short           lühike hosti nimi\n"
- 
--#: ../hostname.c:233
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr "     -a, --alias          alias-nimed\n"
- 
--#: ../hostname.c:234
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr "    -i, --ip-address      hosti IP aadressid\n"
- 
--#: ../hostname.c:235
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr ""
- "    -f, --fqdn, --long    pikk hosti nimi (FQDN - täielik süsteeminimi)\n"
- 
--#: ../hostname.c:236
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
- msgstr "    -d, --domain          DNS domeeni nimi\n"
- 
--#: ../hostname.c:237
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
- msgstr "    -y, --yp, --nis       NIS/YP domeeni nimi\n"
- 
--#: ../hostname.c:239
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
- msgstr "    -n, --node            DECneti võrgusõlme nimi\n"
- 
--#: ../hostname.c:241
-+#: ../hostname.c:240
-+#, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
-@@ -395,7 +431,8 @@
- "    -F, --file            lugeda hosti või NIS domeeni nimi failist\n"
- "\n"
- 
--#: ../hostname.c:243
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -415,6 +452,7 @@
- msgstr "%s: selle käsuga ei saa muuta DNS domeeni nime\n"
- 
- #: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-@@ -423,6 +461,7 @@
- "Kui Te EI kasuta bind'i ega NIS'i nimede lahendamiseks, saate DNS domeeni\n"
- 
- #: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
- msgstr "(mis on täieliku nime osa) nime muuta failist /etc/hosts.\n"
- 
-@@ -441,76 +480,97 @@
- msgid "getnodename()=`%s'\n"
- msgstr "getnodename()=`%s'\n"
- 
--#: ../ifconfig.c:110
-+#: ../ifconfig.c:107
-+#, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
--"Liides  MTU Meetr. RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Liides  MTU Meetr RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
- "Lip\n"
- 
--#: ../ifconfig.c:132 ../ifconfig.c:164
--#, c-format
--msgid "%s: unknown interface: %s\n"
--msgstr "ifconfig: tundmatu liides %s: %s\n"
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, fuzzy, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr "%s: viga liidese info küsimisel: %s\n"
- 
--#: ../ifconfig.c:156 ../ifconfig.c:740 ../ifconfig.c:831 ../ifconfig.c:937
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
-+#, c-format
- msgid "No support for INET on this system.\n"
- msgstr "Antud süsteem ei toeta INET aadressiperekonda\n"
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:193
-+#, fuzzy, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr "%s: viga liidese info küsimisel: %s\n"
-+
-+#: ../ifconfig.c:202
-+#, fuzzy, c-format
- msgid ""
- "Usage:\n"
--"  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
- msgstr ""
- "Kasutamine:\n"
- "  ifconfig [-a] [-i] [-v] [-s] <liides> [[<AF>] <aadress>]\n"
- 
--#: ../ifconfig.c:181
-+#: ../ifconfig.c:204
-+#, c-format
- msgid "  [add <address>[/<prefixlen>]]\n"
- msgstr "  [add <aadress>[/<prefiksi pikkus>]]\n"
- 
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:205
-+#, c-format
- msgid "  [del <address>[/<prefixlen>]]\n"
- msgstr "  [del <aadress>[/<prefiksi pikkus>]]\n"
- 
--#: ../ifconfig.c:183
-+#: ../ifconfig.c:206
-+#, c-format
- msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
- msgstr "  [[-]broadcast [<aadress>]]  [[-]pointopoint [<aadress>]]\n"
- 
--#: ../ifconfig.c:184
-+#: ../ifconfig.c:207
-+#, c-format
- msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
- msgstr "  [netmask <aadress>]  [dstaddr <aadress>]  [tunnel <aadress>]\n"
- 
--#: ../ifconfig.c:187
-+#: ../ifconfig.c:210
-+#, c-format
- msgid "  [outfill <NN>] [keepalive <NN>]\n"
- msgstr "  [outfill <NN>] [keepalive <NN>]\n"
- 
--#: ../ifconfig.c:189
-+#: ../ifconfig.c:212
-+#, c-format
- msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
- msgstr "  [hw <HW> <aadress>]  [metric <NN>]  [mtu <NN>]\n"
- 
--#: ../ifconfig.c:190
-+#: ../ifconfig.c:213
-+#, c-format
- msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- 
--#: ../ifconfig.c:191
-+#: ../ifconfig.c:214
-+#, c-format
- msgid "  [multicast]  [[-]promisc]\n"
- msgstr "  [multicast]  [[-]promisc]\n"
- 
--#: ../ifconfig.c:192
-+#: ../ifconfig.c:215
-+#, c-format
- msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
- msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tüüp>]\n"
- 
--#: ../ifconfig.c:194
-+#: ../ifconfig.c:217
-+#, c-format
- msgid "  [txqueuelen <NN>]\n"
- msgstr "  [txqueuelen <NN>]\n"
- 
--#: ../ifconfig.c:197
-+#: ../ifconfig.c:220
-+#, c-format
- msgid "  [[-]dynamic]\n"
- msgstr "  [[-]dynamic]\n"
- 
--#: ../ifconfig.c:199
-+#: ../ifconfig.c:222
-+#, c-format
- msgid ""
- "  [up|down] ...\n"
- "\n"
-@@ -518,73 +578,134 @@
- "  [up|down] ...\n"
- "\n"
- 
--#: ../ifconfig.c:201
-+#: ../ifconfig.c:224
-+#, c-format
- msgid "  <HW>=Hardware Type.\n"
- msgstr "  <HW>=riistvara tüüp\n"
- 
--#: ../ifconfig.c:202
-+#: ../ifconfig.c:225
-+#, c-format
- msgid "  List of possible hardware types:\n"
- msgstr "  Võimalike riistvara tüüpide nimekiri:\n"
- 
- #. 1 = ARPable
--#: ../ifconfig.c:204
-+#: ../ifconfig.c:227
- #, c-format
- msgid "  <AF>=Address family. Default: %s\n"
- msgstr "  <AF>=aadressiperekond, vaikimisi %s\n"
- 
--#: ../ifconfig.c:205
-+#: ../ifconfig.c:228
-+#, c-format
- msgid "  List of possible address families:\n"
- msgstr "  Võimalike aadressiperekondade nimekiri:\n"
- 
--#: ../ifconfig.c:361
-+#: ../ifconfig.c:303
-+#, c-format
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:380
-+#, c-format
- msgid "Unknown media type.\n"
- msgstr "Tundmatu meedia tüüp\n"
- 
--#: ../ifconfig.c:653
-+#: ../ifconfig.c:417
-+#, c-format
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:429
-+#, c-format
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:441
-+#, c-format
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:465
-+#, c-format
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:523
-+#, c-format
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:652
-+#, c-format
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:684
- #, c-format
- msgid "hw address type `%s' has no handler to set address. failed.\n"
- msgstr ""
- "riistvara aadressi tüübil `%s' pole käsitlejat aadressi seadmiseks - ebaõnn\n"
- 
--#: ../ifconfig.c:662
-+#: ../ifconfig.c:693
- #, c-format
- msgid "%s: invalid %s address.\n"
- msgstr "%s: vigane %s aadress\n"
- 
--#: ../ifconfig.c:706 ../ifconfig.c:796 ../ifconfig.c:882
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+#, c-format
- msgid "No support for INET6 on this system.\n"
- msgstr "Antud süsteem ei toeta INET6 aadressiperekonda\n"
- 
--#: ../ifconfig.c:749 ../ifconfig.c:840
-+#: ../ifconfig.c:780 ../ifconfig.c:871
- #, c-format
- msgid "Interface %s not initialized\n"
- msgstr "Liides %s pole initsialiseeritud\n"
- 
--#: ../ifconfig.c:761 ../ifconfig.c:851
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, c-format
- msgid "Bad address.\n"
- msgstr "Vigane aadress\n"
- 
--#: ../ifconfig.c:854
-+#: ../ifconfig.c:885
-+#, c-format
- msgid "Address deletion not supported on this system.\n"
- msgstr "Antud süsteem ei toeta aadresside kustutamist\n"
- 
--#: ../ifconfig.c:947
-+#: ../ifconfig.c:957
-+#, fuzzy, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "Ei oska seada aadresse aadressiperekonna %d jaoks\n"
-+
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr "Antud süsteem ei toeta ECONET aadressiperekonda\n"
- 
--#: ../ifconfig.c:955
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr "Ei oska seada aadresse aadressiperekonna %d jaoks\n"
- 
--#: ../netstat.c:429
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
- msgstr ""
- "(\"-p\" jaoks ei saanud infot lugeda: geteuid()=%d, aga vaja oleks root'u)\n"
- 
--#: ../netstat.c:433
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
-@@ -592,210 +713,223 @@
- "(Mõnesid protsesse ei saanud identifitseerida, teiste kasutajate\n"
- "info lugemiseks peab olema root)\n"
- 
--#: ../netstat.c:440 ../netstat.c:1171 ../netstat.c:1248
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr "LISTENING"
- 
--#: ../netstat.c:441
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr "CONN SENT"
- 
--#: ../netstat.c:442 ../netstat.c:1250
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr "DISC SENT"
- 
--#: ../netstat.c:443 ../netstat.c:510 ../netstat.c:889 ../netstat.c:1251
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr "ESTABLISHED"
- 
--#: ../netstat.c:465
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr "Aktiivsed NET/ROM soklid\n"
- 
--#: ../netstat.c:466
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
- msgstr ""
- "Kasutaja   Sihtpunkt  Lähtepunkt Liides  Olek         Vr/Vs    SaatJrk "
- "VvJrk\n"
- 
--#: ../netstat.c:476 ../netstat.c:1290
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr "Probleem andmete lugemisel failist %s\n"
- 
--#: ../netstat.c:511
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr "SYN_SENT"
- 
--#: ../netstat.c:512
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr "SYN_RECV"
- 
--#: ../netstat.c:513
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr "FIN_WAIT1"
- 
--#: ../netstat.c:514
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr "FIN_WAIT2"
- 
--#: ../netstat.c:515
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr "TIME_WAIT"
- 
--#: ../netstat.c:516
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr "CLOSE"
- 
--#: ../netstat.c:517
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr "CLOSE_WAIT"
- 
--#: ../netstat.c:518
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr "LAST_ACK"
- 
--#: ../netstat.c:519
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr "LISTEN"
- 
--#: ../netstat.c:520
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr "CLOSING"
- 
--#: ../netstat.c:587
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr "Hoiatus - sain imeliku igmp6 rea (nr. %d)\n"
- 
--#: ../netstat.c:592 ../netstat.c:630 ../netstat.c:751 ../netstat.c:883
--#: ../netstat.c:1014 ../netstat.c:1019
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr "netstat: aadressiperekonda %d ei toetata\n"
- 
--#: ../netstat.c:605 ../netstat.c:610 ../netstat.c:618 ../netstat.c:625
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr "Hoiatus - sain imeliku igmp rea (nr. %d)\n"
- 
--#: ../netstat.c:668
-+#: ../netstat.c:677
-+#, c-format
- msgid "Active X.25 sockets\n"
- msgstr "Aktiivsed X.25 soklid\n"
- 
- #. IMHO, Vr/Vs is not very usefull --SF
--#: ../netstat.c:670
-+#: ../netstat.c:679
-+#, c-format
- msgid ""
--"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  "
--"Recv-Q\n"
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
- msgstr ""
- "Sihtpunkt    Lähtepunkt      Liides  LCI  Olek         Vr/Vs  SaatJrk VvJrk\n"
- 
--#: ../netstat.c:747
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr "Hoiatus - sain imeliku tcp rea\n"
- 
--#: ../netstat.c:788 ../netstat.c:938 ../netstat.c:1057
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr "eikäi ((0.00/%ld/%d)"
- 
--#: ../netstat.c:792
-+#: ../netstat.c:804
- #, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr "käib (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:797
-+#: ../netstat.c:809
- #, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr "keepalive (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:802
-+#: ../netstat.c:814
- #, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr "timewait (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:807 ../netstat.c:947 ../netstat.c:1067
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr "eitea-%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:879
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr "Hoiatus - sain imeliku udp rea\n"
- 
--#: ../netstat.c:897 ../netstat.c:1157 ../netstat.c:1190
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr "TUNDMATU"
- 
--#: ../netstat.c:943 ../netstat.c:1062
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr "käib-%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:1028
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr "Hoiatus - sain imeliku raw rea\n"
- 
--#: ../netstat.c:1110
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr "Hoiatus - sain imeliku unix rea\n"
- 
--#: ../netstat.c:1137
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr "STREAM"
- 
--#: ../netstat.c:1141
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr "DGRAM"
- 
--#: ../netstat.c:1145
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr "RAW"
- 
--#: ../netstat.c:1149
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr "RDM"
- 
--#: ../netstat.c:1153
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
- msgstr "SEQPACKET"
- 
--#: ../netstat.c:1162
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr "VABA"
- 
--#: ../netstat.c:1178
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr "ÜHENDUMAS"
- 
--#: ../netstat.c:1182
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr "ÜHENDATUD"
- 
--#: ../netstat.c:1186
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr "LAHTIÜHENDUMAS"
- 
--#: ../netstat.c:1217
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
- msgstr "Aktiivsed UNIX domeeni soklid "
- 
--#: ../netstat.c:1219 ../netstat.c:1729
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr "(serverid ja ühendatud)"
- 
--#: ../netstat.c:1222 ../netstat.c:1732
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr "(ainult serverid)"
- 
--#: ../netstat.c:1224 ../netstat.c:1734
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr "(ilma serveriteta)"
- 
--#: ../netstat.c:1227
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
-@@ -803,32 +937,36 @@
- "\n"
- "Proto Mitu   Lipud       Tüüp       Olek         I-kirje "
- 
--#: ../netstat.c:1229
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr "Tee\n"
- 
--#: ../netstat.c:1249
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr "SABM SENT"
- 
--#: ../netstat.c:1252
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr "RECOVERY"
- 
--#: ../netstat.c:1266
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr "Aktiivsed AX.25 soklid\n"
- 
--#: ../netstat.c:1267
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr "Sihtpunkt  Lähtepunkt Liides  Olek         Vr/Vs    SaatJrk VvJrk\n"
- 
--#: ../netstat.c:1310
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr "Probleem andmete lugemisel failist %s\n"
- 
--#: ../netstat.c:1361
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-@@ -838,47 +976,53 @@
- "Proto VvJrk  SaatJrk Kohalik aadress           Väline aadress             "
- "Olek "
- 
--#: ../netstat.c:1363
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr " Kasutaja"
- 
--#: ../netstat.c:1397
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr "ESTAB"
- 
--#: ../netstat.c:1405
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr "UNK."
- 
--#: ../netstat.c:1443
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
- msgstr "Tuuma liideste tabel\n"
- 
--#: ../netstat.c:1447
-+#: ../netstat.c:1465
-+#, fuzzy, c-format
- msgid ""
--"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
--"Liides  MTU Meetr RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Liides  MTU Meetr. RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Lip\n"
- 
--#: ../netstat.c:1451
-+#: ../netstat.c:1469
- msgid "missing interface information"
- msgstr "Puudulik informatsioon liideste kohta"
- 
--#: ../netstat.c:1474
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
- "Kasutamine: netstat [-veenNcCF] [<Af>] -r\n"
- "            netstat {-V|--version|-h|--help}\n"
- 
--#: ../netstat.c:1475
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr "            netstat [-vnNcaeol] [<Sokkel> ...]\n"
- 
--#: ../netstat.c:1476
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
-@@ -886,25 +1030,30 @@
- "            netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- 
--#: ../netstat.c:1478
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr "        -r, --route              ruutingutabeli näitamine\n"
- 
--#: ../netstat.c:1479
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr "        -i, --interfaces         liideste tabeli näitamine\n"
- 
--#: ../netstat.c:1480
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr "        -g, --groups             multiedastuse gruppide näitamine\n"
- 
--#: ../netstat.c:1481
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
- msgstr ""
- "        -s, --statistics         võrgu statistika näitamine (SNMP stiilis)\n"
- 
--#: ../netstat.c:1483
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
-@@ -912,36 +1061,39 @@
- "        -M, --masquerade         maskeeritavate ühenduste näitamine\n"
- "\n"
- 
--#: ../netstat.c:1486 ../route.c:86
--msgid "        -n, --numeric            dont resolve names\n"
--msgstr "        -n, --numeric            mitte lahendada numbreid nimedeks\n"
--
--#: ../netstat.c:1487
--msgid "        --numeric-hosts          dont resolve host names\n"
-+#: ../netstat.c:1505
-+#, fuzzy, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
- msgstr "        --numeric-hosts          mitte lahendada hostinimesid\n"
- 
--#: ../netstat.c:1488
--msgid "        --numeric-ports          dont resolve port names\n"
-+#: ../netstat.c:1506
-+#, fuzzy, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
- msgstr "        --numeric-ports          mitte lahendada pordinimesid\n"
- 
--#: ../netstat.c:1489
--msgid "        --numeric-users          dont resolve user names\n"
-+#: ../netstat.c:1507
-+#, fuzzy, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
- msgstr "        --numeric-users          mitte lahendada kasutajanimesid\n"
- 
--#: ../netstat.c:1490
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr "        -N, --symbolic           lahendada riistvara aadressid\n"
- 
--#: ../netstat.c:1491 ../route.c:87
-+#: ../netstat.c:1509 ../route.c:88
-+#, c-format
- msgid "        -e, --extend             display other/more information\n"
- msgstr "        -e, --extend             muu info/lisainfo näitamine\n"
- 
--#: ../netstat.c:1492
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
- msgstr ""
- "        -p, --programs           soklite kohta PID/protsessi nime näitamine\n"
- 
--#: ../netstat.c:1493
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
-@@ -949,22 +1101,26 @@
- "        -c, --continuous         pidevalt uuenev nimekiri\n"
- "\n"
- 
--#: ../netstat.c:1494
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
- msgstr "        -l, --listening          kuulavate serversoklite näitamine\n"
- 
--#: ../netstat.c:1495
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
- msgstr ""
- "        -a, --all, --listening   kõigi soklite näitamine (vaikimisi "
- "ühendatud)\n"
- 
--#: ../netstat.c:1496
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr "        -o, --timers             taimerite näitamine\n"
- 
--#: ../netstat.c:1497 ../route.c:88
-+#: ../netstat.c:1515 ../route.c:89
-+#, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
-@@ -972,7 +1128,8 @@
- "        -F, --fib                üldiste ruutingutabelite näitamine "
- "(vaikimisi)\n"
- 
--#: ../netstat.c:1498 ../route.c:89
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
-@@ -981,108 +1138,121 @@
- "näitamine\n"
- "\n"
- 
--#: ../netstat.c:1500
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
--"  <Sokkel>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Sokkel>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- 
--#: ../netstat.c:1501 ../route.c:91
--#, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-+#: ../netstat.c:1519
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr "  <AF>=kasutage '-A <af>' või '--<af>' vaikimisi: %s\n"
- 
--#: ../netstat.c:1502 ../route.c:92
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
- msgstr "  Võimalike ruutingu toetavate aadressiperekondade nimekiri:\n"
- 
--#: ../netstat.c:1726
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr "Aktiivsed internetiühendused "
- 
--#: ../netstat.c:1736
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- "\n"
--"Proto  VvJrk SaatJrk Kohalik aadress        Väline aadress          Olek     "
--"  "
-+"Proto  VvJrk SaatJrk Kohalik aadress        Väline aadress          "
-+"Olek       "
- 
--#: ../netstat.c:1738
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr " Kasutaja   I-kirje   "
- 
--#: ../netstat.c:1741
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr " Taimer"
- 
--#: ../netstat.c:1771
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
- msgstr "IPv4 grupikuuluvused\n"
- 
--#: ../netstat.c:1772
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr "Liides          Mitu   Grupp\n"
- 
--#: ../rarp.c:43
-+#: ../rarp.c:44
- msgid "This kernel does not support RARP.\n"
- msgstr "rarp: tuum ei toeta RARP'i\n"
- 
--#: ../rarp.c:82
-+#: ../rarp.c:83
- #, c-format
- msgid "no RARP entry for %s.\n"
- msgstr "rarp: %s jaoks pole RARP kirjet\n"
- 
--#: ../rarp.c:95
-+#: ../rarp.c:96
- #, c-format
- msgid "%s: bad hardware address\n"
- msgstr "rarp: vigane riistvaraline aadress %s\n"
- 
--#: ../rarp.c:127
-+#: ../rarp.c:128
- #, c-format
- msgid "rarp: cannot open file %s:%s.\n"
- msgstr "rarp: ei saa avada faili %s:%s\n"
- 
--#: ../rarp.c:139
-+#: ../rarp.c:140
- #, c-format
- msgid "rarp: format error at %s:%u\n"
- msgstr "rarp: vorminguviga failis %s real %u\n"
- 
--#: ../rarp.c:143 ../rarp.c:287
-+#: ../rarp.c:144 ../rarp.c:289
- #, c-format
- msgid "rarp: %s: unknown host\n"
- msgstr "rarp: tundmatu host %s\n"
- 
--#: ../rarp.c:146
-+#: ../rarp.c:147
- #, c-format
- msgid "rarp: cannot set entry from %s:%u\n"
- msgstr "rarp: ei saa kehtestada kirjet failist %s realt %u\n"
- 
--#: ../rarp.c:175
-+#: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
- msgstr ""
- "Kasutamine:\n"
- "  rarp -a                              puhvris olevate kirjete vaatamine\n"
- 
--#: ../rarp.c:176
-+#: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
- msgstr "  rarp -d <hosti nimi>                 kirje kustutamine puhvrist\n"
- 
--#: ../rarp.c:177
-+#: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
- msgstr "  rarp [<HW>] -s <hosti nimi> <hwaddr> kirje lisamine puhvrisse\n"
- 
--#: ../rarp.c:178
-+#: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
- msgstr ""
- "  rarp -f                              kirjete lisamine failist /etc/ethers\n"
- 
--#: ../rarp.c:179
-+#: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
-@@ -1090,24 +1260,26 @@
- "  rarp -V                              programmi versiooni näitamine\n"
- "\n"
- 
--#: ../rarp.c:236
-+#: ../rarp.c:238
- #, c-format
- msgid "%s: illegal option mix.\n"
- msgstr "%s: lubamatu võtmete kombinatsioon\n"
- 
--#: ../rarp.c:267
-+#: ../rarp.c:269
- #, c-format
- msgid "rarp: %s: unknown hardware type.\n"
- msgstr "rarp: tundmatu riistvara tüüp %s\n"
- 
--#: ../route.c:79
-+#: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
- "Kasutamine:\n"
- "    route [-nNvee] [-FC] [<AF>]           Tuuma ruutingutabeli näitamine\n"
- 
--#: ../route.c:80
-+#: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
-@@ -1115,7 +1287,8 @@
- "    route [-v] [-FC] {add|del|flush} ...  Tuuma ruutingutabeli muutmine\n"
- "\n"
- 
--#: ../route.c:82
-+#: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
-@@ -1123,7 +1296,8 @@
- "    route {-h|--help} [<AF>]              Detailne süntaks perekonna AF "
- "jaoks\n"
- 
--#: ../route.c:83
-+#: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
-@@ -1132,15 +1306,23 @@
- "    route {-V|--version}                  Versiooni ja oskuste näitamine\n"
- "\n"
- 
-+#: ../route.c:92
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>=kasutage '-A <af>' või '--<af>' vaikimisi: %s\n"
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr "Kasutamine:  plipconfig [-a] [-i] [-v] liides\n"
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr "                        [nibble NN] [trigger NN]\n"
- 
- #: ../plipconfig.c:68
-+#, c-format
- msgid "       plipconfig -V | --version\n"
- msgstr "             plipconfig -V | --version\n"
- 
-@@ -1149,25 +1331,30 @@
- msgid "%s\tnibble %lu  trigger %lu\n"
- msgstr "%s\tnibble %lu  trigger %lu\n"
- 
--#: ../iptunnel.c:84
-+#: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr "Kasutamine: iptunnel { add | change | del | show } [ NIMI ]\n"
- 
--#: ../iptunnel.c:85
-+#: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
- msgstr ""
- "             [ mode { ipip | gre | sit } ] [ remote AADR ] [ local AADR ]\n"
- 
--#: ../iptunnel.c:86
-+#: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr "             [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- 
--#: ../iptunnel.c:87
-+#: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
- msgstr "             [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev LIIDES ]\n"
- 
--#: ../iptunnel.c:88
-+#: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
-@@ -1175,83 +1362,99 @@
- "             iptunnel -V | --version\n"
- "\n"
- 
--#: ../iptunnel.c:89
-+#: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr "Kus:   NIMI := STRING\n"
- 
--#: ../iptunnel.c:90
-+#: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr "       AADR := { IP_AADRESS | any }\n"
- 
--#: ../iptunnel.c:91
-+#: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr "       TOS  := { ARV | inherit }\n"
- 
--#: ../iptunnel.c:92
-+#: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr "       TTL  := { 1..255 | inherit }\n"
- 
--#: ../iptunnel.c:93
-+#: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr ""
- "       KEY  := { PUNKTIDEGA_ARVUNELIK | ARV }\n"
- "       LIIDES := FÜÜSILISE_LIIDESE_NIMI\n"
- 
--#: ../iptunnel.c:331
-+#: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr "ipip ja sit juures ei ole võtmed lubatud\n"
- 
--#: ../iptunnel.c:351
-+#: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr "Leviedastusega tunnel vajab lähteaadressi\n"
- 
--#: ../iptunnel.c:366
-+#: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr "ttl != 0 ning noptmudisc ei sobi kokku\n"
- 
--#: ../iptunnel.c:378
-+#: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr "Ei suuda määrata tunneli moodi (ipip, gre või sit)\n"
- 
--#: ../iptunnel.c:416
-+#: ../iptunnel.c:417
- #, c-format
- msgid "%s: %s/ip  remote %s  local %s "
- msgstr "%s: %s/ip teises otsas %s  siin %s "
- 
--#: ../iptunnel.c:420
-+#: ../iptunnel.c:421
- msgid "unknown"
- msgstr "tundmatu"
- 
--#: ../iptunnel.c:452
-+#: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr "  Järjekorravälised paketid visatakse minema\n"
- 
--#: ../iptunnel.c:454
-+#: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr "  Vastuvõetavates pakettides on kontrollsumma kohustuslik\n"
- 
--#: ../iptunnel.c:456
-+#: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr "  Väljuvad paketid varustatakse järjekorranumbritega\n"
- 
--#: ../iptunnel.c:458
-+#: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr "  Väljuvad paketid varustatakse kontrollsummaga\n"
- 
--#: ../iptunnel.c:486
-+#: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
- msgstr "/proc/net/dev on vales formaadis. Vale tuuma versioon?\n"
- 
--#: ../iptunnel.c:499
-+#: ../iptunnel.c:500
- #, c-format
- msgid "Failed to get type of [%s]\n"
- msgstr "Ei suutnud kindlaks teha liidese %s tüüpi\n"
- 
--#: ../iptunnel.c:515
-+#: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr "RX: Pakette    Baite        Vigu   KSumVigu JrkVigu  Levipakette\n"
- 
--#: ../iptunnel.c:518
-+#: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr "TX: Pakette    Baite        Vigu   DeadLoop EiRuudi  MäluOtsas\n"
- 
-@@ -1658,13 +1861,13 @@
- msgstr "%u paketti pandi otse recvmsg eeljärjekorda"
- 
- #: ../statistics.c:178
--#, c-format
--msgid "%u packets directly received from backlog"
-+#, fuzzy, c-format
-+msgid "%u of bytes directly received from backlog"
- msgstr "%u paketti võeti vastu otse backlog-ist"
- 
- #: ../statistics.c:180
--#, c-format
--msgid "%u packets directly received from prequeue"
-+#, fuzzy, c-format
-+msgid "%u of bytes directly received from prequeue"
- msgstr "%u paketti võeti vastu otse eeljärjekorrast"
- 
- #: ../statistics.c:182
-@@ -1673,8 +1876,8 @@
- msgstr "%u paketti kustutati eeljärjekorrast"
- 
- #: ../statistics.c:183
--#, c-format
--msgid "%u packets header predicted"
-+#, fuzzy, c-format
-+msgid "%u packet headers predicted"
- msgstr "%u paketti päise õige ennustusega"
- 
- #: ../statistics.c:184
-@@ -1687,19 +1890,210 @@
- msgid "Ran %u times out of system memory during packet sending"
- msgstr "Pakettide saatmisel sai %u korda süsteemne mälu otsa"
- 
--#: ../statistics.c:253
-+#: ../statistics.c:188
-+#, fuzzy, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr "%u sisenevat paketti tundmatule pordile"
-+
-+#: ../statistics.c:189
-+#, c-format
-+msgid "%u predicted acknowledgments"
-+msgstr ""
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
-+
-+#: ../statistics.c:192
-+#, fuzzy, c-format
-+msgid "%u bad SACKs received"
-+msgstr "%u vigast segmenti võeti vastu"
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:197
-+#, fuzzy, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr "%u ühenduse katkestust saabus"
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr ""
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, fuzzy, c-format
-+msgid "%u retransmits lost"
-+msgstr "%u katkestust saadeti"
-+
-+#: ../statistics.c:202
-+#, fuzzy, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr "%u segmenti saadeti uuesti"
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, fuzzy, c-format
-+msgid "%u fast retransmits"
-+msgstr "%u segmenti saadeti uuesti"
-+
-+#: ../statistics.c:206
-+#, fuzzy, c-format
-+msgid "%u forward retransmits"
-+msgstr "%u edastati"
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, fuzzy, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "%u segmenti saadeti uuesti"
-+
-+#: ../statistics.c:210
-+#, fuzzy, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "%u pakettide kokkupanekut ebaõnnestus"
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, fuzzy, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr ""
-+"%u paketti kustutati vastuvõtu järjekorrast sokli puhvri ületäitumise tõttu"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, fuzzy, c-format
-+msgid "%u DSACKs received"
-+msgstr "%u paketti võeti vastu"
-+
-+#: ../statistics.c:216
-+#, fuzzy, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "kokku võeti vastu %u paketti"
-+
-+#: ../statistics.c:217
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "%u ühenduse katkestust saabus"
-+
-+#: ../statistics.c:218
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "%u ühenduse katkestust saabus"
-+
-+#: ../statistics.c:219
-+#, fuzzy, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "%u ühenduse katkestust saabus"
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, fuzzy, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "%u aktiivsest ühendusest keelduti ajatempli tõttu"
-+
-+#: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr "lubatud"
- 
--#: ../statistics.c:253
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr "keelatud"
- 
--#: ../statistics.c:336
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr "Viga /proc/net/snmp analüüsimisel"
- 
--#: ../statistics.c:349
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr "Ei saa avada faili /proc/net/snmp"
- 
-@@ -1713,7 +2107,7 @@
- msgid "Cannot change line discipline to `%s'.\n"
- msgstr "Ei suuda seada `%s' liiniprotokolliks\n"
- 
--#: ../lib/af.c:153 ../lib/hw.c:156
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr "UNSPEC"
- 
-@@ -1729,11 +2123,11 @@
- msgid "IPv6"
- msgstr "IPv6"
- 
--#: ../lib/af.c:164 ../lib/hw.c:177
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr "AMPR AX.25"
- 
--#: ../lib/af.c:167 ../lib/hw.c:183
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr "AMPR NET/ROM"
- 
-@@ -1745,7 +2139,7 @@
- msgid "Appletalk DDP"
- msgstr "Appletalk DDP"
- 
--#: ../lib/af.c:176 ../lib/hw.c:218
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr "Econet"
- 
-@@ -1753,19 +2147,21 @@
- msgid "CCITT X.25"
- msgstr "CCITT X.25"
- 
--#: ../lib/af.c:182 ../lib/hw.c:180
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr "AMPR ROSE"
- 
--#: ../lib/af.c:185 ../lib/hw.c:168
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr "Ash"
- 
- #: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr "Meil on kombeks üks aadressiperekond korraga\n"
- 
- #: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr "Liiga palju aadressiperekonna argumente\n"
- 
-@@ -1790,6 +2186,7 @@
- msgstr "in_arcnet(%s): sodi lõpus\n"
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
- msgstr "Vigane Ash aadress"
- 
-@@ -1808,22 +2205,21 @@
- msgstr "Liiga pikk kutsung"
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr "AX.25 pole antud süsteemis konfigureeritud\n"
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr "Tuuma AX.25 ruutingutabel\n"
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr "Sihtpunkt    Liides   Kasutus\n"
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr "`ddp' jaoks ruutingutabelit veel ei oska\n"
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1879,90 +2275,94 @@
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr "in_hippi(%s): sodi lõpus\n"
- 
--#: ../lib/hw.c:155
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr "Kohalik loopback"
- 
--#: ../lib/hw.c:158
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr "Serial Line IP"
- 
--#: ../lib/hw.c:159
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr "VJ Serial Line IP"
- 
--#: ../lib/hw.c:160
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr "6-bitine Serial Line IP"
- 
--#: ../lib/hw.c:161
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr "VJ 6-bitine Serial Line IP"
- 
--#: ../lib/hw.c:162
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr "Adaptiivne Serial Line IP"
- 
--#: ../lib/hw.c:165
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr "Ethernet"
- 
--#: ../lib/hw.c:171
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr "Fiber Distributed Data Interface"
- 
--#: ../lib/hw.c:174
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr "HIPPI"
- 
--#: ../lib/hw.c:186
-+#: ../lib/hw.c:191
- msgid "generic X.25"
- msgstr "üldine X.25"
- 
--#: ../lib/hw.c:189
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr "IPIP tunnel"
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
- msgstr "Kakspunktprotokoll"
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr "(Cisco-)HDLC"
- 
--#: ../lib/hw.c:196
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:199
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr "ARCnet"
- 
--#: ../lib/hw.c:202
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr "Frame Relay DLCI"
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr "Frame Relay Access Device"
- 
--#: ../lib/hw.c:206
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr "IPv6-in-IPv4"
- 
--#: ../lib/hw.c:209
-+#: ../lib/hw.c:214
- msgid "IrLAP"
- msgstr "IrLAP"
- 
--#: ../lib/hw.c:212
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr "16/4 Mbps Token Ring"
- 
--#: ../lib/hw.c:214
-+#: ../lib/hw.c:219
- msgid "16/4 Mbps Token Ring (New)"
- msgstr "16/4 Mbps Token Ring (New)"
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
-@@ -1972,27 +2372,32 @@
- msgid "[UNKNOWN]"
- msgstr "[TUNDMATU]"
- 
--#: ../lib/inet6_gr.c:79
-+#: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr "INET6 (IPv6) pole antud süsteemis konfigureeritud\n"
- 
--#: ../lib/inet6_gr.c:82
-+#: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
- msgstr "Tuuma IPv6 ruutingutabel\n"
- 
--#: ../lib/inet6_gr.c:84
-+#: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
- msgstr ""
--"Sihtpunkt                                   Järgmine samm                    "
--"       Lipud Meetr  Mitu Kasut Liides\n"
-+"Sihtpunkt                                   Järgmine "
-+"samm                           Lipud Meetr  Mitu Kasut Liides\n"
- 
--#: ../lib/inet6_gr.c:158
-+#: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr "Tuuma IPv6 naabrite puhver\n"
- 
--#: ../lib/inet6_gr.c:161
-+#: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
-@@ -2000,7 +2405,8 @@
- "Naaber                                      HW Aadress        Liides   Lipud "
- "Mitu Olek\n"
- 
--#: ../lib/inet6_gr.c:165
-+#: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
-@@ -2009,31 +2415,38 @@
- "Mitu Olek            Stale(sec) Delete(sec)\n"
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr "Kasutamine: route [-vF] del AADRESS\n"
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr ""
- "            route [-vF] add AADRESS [gw GW] [metric M] [[dev] LIIDES]\n"
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr "            route [-FC] flush      Seda EI toetata\n"
- 
- #: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
- msgstr "`inet6' ruutingutabeli tühjendamist ei toetata\n"
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr "INET (IPv4) pole antud süsteemis konfigureeritud\n"
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
- msgstr "Tuuma IP ruutingutabel\n"
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2042,6 +2455,7 @@
- "Liides\n"
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2050,6 +2464,7 @@
- "Liides\n"
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
-@@ -2058,10 +2473,12 @@
- "Liides   MSS   Aken   irtt\n"
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
- msgstr "Tuuma IP ruutingu puhver\n"
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2070,6 +2487,7 @@
- "Liides\n"
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2078,6 +2496,7 @@
- "Liides\n"
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
-@@ -2086,6 +2505,7 @@
- "Liides   MSS    Aken  irtt  HH  Arp\n"
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-@@ -2093,7 +2513,8 @@
- "Lähtepunkt      Sihtpunkt       Ruuter          Lipud Meetr  Mitu Kasut "
- "Liides   MSS   Aken   irtt  TOS HHRef HHUptod     SpecDst\n"
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
-@@ -2101,31 +2522,36 @@
- "Kasutamine: route [-vF] del {-host|-net} AADRESS[/PREFIKS] [gw GW] [metric "
- "M] [[dev] LIIDES]\n"
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
- msgstr ""
- "            route [-vF] add {-host|-net} AADRESS[/PREFIKS] [gw GW] [metric "
- "M]\n"
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- "                              [netmask N] [mss MSS] [window W] [irtt I]\n"
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr "                              [mod] [dyn] [reinstate] [[dev] LIIDES]\n"
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
- msgstr ""
- "            route [-vF] add {-host|-net} AADRESS[/PREFIKS] [metric M] "
- "reject\n"
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr "            route [-FC] flush      Seda EI toetata\n"
- 
-@@ -2135,14 +2561,17 @@
- msgstr "route: %s: võrku ei saa kasutada ruuterina\n"
- 
- #: ../lib/inet_sr.c:174
-+#, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr "route: vigane MSS/MTU\n"
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr "route: Vigane akna suurus\n"
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr "route: vigane algne rtt\n"
- 
-@@ -2157,75 +2586,92 @@
- msgstr "route: vale võrgumask %s\n"
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr "route: võrgumask ei sobi ruutingu aadressiga\n"
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
- msgstr "`inet' ruutingutabeli tühjendamist ei toetata\n"
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
- msgstr "`inet' ruutingu puhvri muutmist ei toetata\n"
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr "IPX pole antud süsteemis konfigureeritud\n"
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
- msgstr "Tuuma IPX ruutingutabel\n"
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
- msgstr "Sihtpunkt                 Ruuteri võrk              Ruuter ise\n"
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
- msgstr "IPX osa vajab ümbertegemist\n"
- 
- #: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr "IP maskeerimise kirjed\n"
- 
- #: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr "Proto  Aegub  Lähtepunkt           Sihtpunkt            Pordid\n"
- 
- #: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
--"Proto  Aegub     Initseq Delta Prevd Lähtepunkt           Sihtpunkt          "
--"  Pordid\n"
-+"Proto  Aegub     Initseq Delta Prevd Lähtepunkt           "
-+"Sihtpunkt            Pordid\n"
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr "NET/ROM pole antud süsteemis konfigureeritud\n"
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
- msgstr "Tuuma NET/ROM ruutingutabel\n"
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr "Sihtpunkt   Mnemoonika Kvaliteet Naaber    Liides\n"
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
- msgstr "netrom kasutus\n"
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
- msgstr "NET/ROM osa vajab ümbertegemist\n"
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr "Sellest programmist ei saa PPP-d käivitada\n"
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
- msgstr "Palun kasutage pppd'd\n"
- 
-@@ -2234,287 +2680,314 @@
- msgstr "Sõlme aadress peab olema kümnekohaline"
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr "ROSE pole antud süsteemis konfigureeritud\n"
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
- msgstr "Tuuma ROSE ruutingutabel\n"
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr "in_tr(%s): vigane token ring-aadress\n"
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr "in_tr(%s): ignoreerin lõpetavat koolonit\n"
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr "in_tr(%s): sodi lõpus\n"
- 
--#: ../lib/interface.c:164
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
- msgstr "Hoiatus: `inet' sokleid ei ole: %s\n"
- 
--#: ../lib/interface.c:316
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr "Hoiatus: ei saa avada faili %s (%s). Väljund on piiratud.\n"
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:556
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr "Liidest ei leitud"
- 
--#: ../lib/interface.c:560
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
- msgstr "%s: viga liidese info küsimisel: %s\n"
- 
--#: ../lib/interface.c:593
-+#: ../lib/interface.c:608
- msgid "     - no statistics available -"
- msgstr "     - statistikat ei ole      -"
- 
--#: ../lib/interface.c:597
-+#: ../lib/interface.c:612
-+#, c-format
- msgid "[NO FLAGS]"
- msgstr "[LIPPE POLE]"
- 
--#: ../lib/interface.c:673
-+#: ../lib/interface.c:688
- #, c-format
- msgid "%-9.9s Link encap:%s  "
- msgstr "%-9.9s kapseldus:%s  "
- 
--#: ../lib/interface.c:678
-+#: ../lib/interface.c:693
- #, c-format
- msgid "HWaddr %s  "
- msgstr "HWaddr %s  "
- 
--#: ../lib/interface.c:681
-+#: ../lib/interface.c:696
- #, c-format
- msgid "Media:%s"
- msgstr "meedia:%s"
- 
--#: ../lib/interface.c:683
-+#: ../lib/interface.c:698
-+#, c-format
- msgid "(auto)"
- msgstr "(auto)"
- 
--#: ../lib/interface.c:690
-+#: ../lib/interface.c:705
- #, c-format
- msgid "          %s addr:%s "
- msgstr "          %s aadress:%s "
- 
--#: ../lib/interface.c:693
-+#: ../lib/interface.c:708
- #, c-format
- msgid " P-t-P:%s "
- msgstr " P-t-P:%s "
- 
--#: ../lib/interface.c:696
-+#: ../lib/interface.c:711
- #, c-format
- msgid " Bcast:%s "
- msgstr " bcast:%s "
- 
--#: ../lib/interface.c:698
-+#: ../lib/interface.c:713
- #, c-format
- msgid " Mask:%s\n"
- msgstr " mask:%s\n"
- 
--#: ../lib/interface.c:715
-+#: ../lib/interface.c:730
- #, c-format
- msgid "          inet6 addr: %s/%d"
- msgstr "          inet6 aadr: %s/%d"
- 
--#: ../lib/interface.c:717
-+#: ../lib/interface.c:732
-+#, c-format
- msgid " Scope:"
- msgstr " skoop:"
- 
--#: ../lib/interface.c:720
-+#: ../lib/interface.c:735
-+#, c-format
- msgid "Global"
- msgstr "globaalne"
- 
--#: ../lib/interface.c:723
-+#: ../lib/interface.c:738
-+#, c-format
- msgid "Link"
- msgstr "ühendus"
- 
--#: ../lib/interface.c:726
-+#: ../lib/interface.c:741
-+#, c-format
- msgid "Site"
- msgstr "site"
- 
--#: ../lib/interface.c:729
-+#: ../lib/interface.c:744
-+#, c-format
- msgid "Compat"
- msgstr "ühilduvus"
- 
--#: ../lib/interface.c:732
-+#: ../lib/interface.c:747
-+#, c-format
- msgid "Host"
- msgstr "host"
- 
--#: ../lib/interface.c:735
-+#: ../lib/interface.c:750
-+#, c-format
- msgid "Unknown"
- msgstr "tundmatu"
- 
--#: ../lib/interface.c:750
-+#: ../lib/interface.c:765
- #, c-format
- msgid "          IPX/Ethernet II addr:%s\n"
- msgstr "          IPX/Ethernet II aadr:%s\n"
- 
--#: ../lib/interface.c:753
-+#: ../lib/interface.c:768
- #, c-format
- msgid "          IPX/Ethernet SNAP addr:%s\n"
- msgstr "          IPX/Ethernet SNAP aadr:%s\n"
- 
--#: ../lib/interface.c:756
-+#: ../lib/interface.c:771
- #, c-format
- msgid "          IPX/Ethernet 802.2 addr:%s\n"
- msgstr "          IPX/Ethernet 802.2 aadr:%s\n"
- 
--#: ../lib/interface.c:759
-+#: ../lib/interface.c:774
- #, c-format
- msgid "          IPX/Ethernet 802.3 addr:%s\n"
- msgstr "          IPX/Ethernet 802.3 aadr:%s\n"
- 
--#: ../lib/interface.c:769
-+#: ../lib/interface.c:784
- #, c-format
- msgid "          EtherTalk Phase 2 addr:%s\n"
- msgstr "          EtherTalk Phase 2 aadr:%s\n"
- 
--#: ../lib/interface.c:778
-+#: ../lib/interface.c:793
- #, c-format
- msgid "          econet addr:%s\n"
- msgstr "          econeti aadr:%s\n"
- 
--#: ../lib/interface.c:785
-+#: ../lib/interface.c:800
-+#, c-format
- msgid "[NO FLAGS] "
- msgstr "[LIPPE POLE]"
- 
--#: ../lib/interface.c:787
-+#: ../lib/interface.c:802
-+#, c-format
- msgid "UP "
- msgstr "UP "
- 
--#: ../lib/interface.c:789
-+#: ../lib/interface.c:804
-+#, c-format
- msgid "BROADCAST "
- msgstr "BROADCAST "
- 
--#: ../lib/interface.c:791
-+#: ../lib/interface.c:806
-+#, c-format
- msgid "DEBUG "
- msgstr "DEBUG "
- 
--#: ../lib/interface.c:793
-+#: ../lib/interface.c:808
-+#, c-format
- msgid "LOOPBACK "
- msgstr "LOOPBACK "
- 
--#: ../lib/interface.c:795
-+#: ../lib/interface.c:810
-+#, c-format
- msgid "POINTOPOINT "
- msgstr "POINTOPOINT "
- 
--#: ../lib/interface.c:797
-+#: ../lib/interface.c:812
-+#, c-format
- msgid "NOTRAILERS "
- msgstr "NOTRAILERS "
- 
--#: ../lib/interface.c:799
-+#: ../lib/interface.c:814
-+#, c-format
- msgid "RUNNING "
- msgstr "RUNNING "
- 
--#: ../lib/interface.c:801
-+#: ../lib/interface.c:816
-+#, c-format
- msgid "NOARP "
- msgstr "NOARP "
- 
--#: ../lib/interface.c:803
-+#: ../lib/interface.c:818
-+#, c-format
- msgid "PROMISC "
- msgstr "PROMISC "
- 
--#: ../lib/interface.c:805
-+#: ../lib/interface.c:820
-+#, c-format
- msgid "ALLMULTI "
- msgstr "ALLMULTI "
- 
--#: ../lib/interface.c:807
-+#: ../lib/interface.c:822
-+#, c-format
- msgid "SLAVE "
- msgstr "SLAVE "
- 
--#: ../lib/interface.c:809
-+#: ../lib/interface.c:824
-+#, c-format
- msgid "MASTER "
- msgstr "MASTER "
- 
--#: ../lib/interface.c:811
-+#: ../lib/interface.c:826
-+#, c-format
- msgid "MULTICAST "
- msgstr "MULTICAST "
- 
--#: ../lib/interface.c:814
-+#: ../lib/interface.c:829
-+#, c-format
- msgid "DYNAMIC "
- msgstr "DYNAMIC "
- 
- #. DONT FORGET TO ADD THE FLAGS IN ife_print_short
--#: ../lib/interface.c:817
-+#: ../lib/interface.c:832
- #, c-format
- msgid " MTU:%d  Metric:%d"
- msgstr " MTU:%d meetrika:%d"
- 
--#: ../lib/interface.c:821
-+#: ../lib/interface.c:836
- #, c-format
- msgid "  Outfill:%d  Keepalive:%d"
- msgstr "  ülalhoidepakettide intervall:%d  ülalhoidetaimaut:%d"
- 
--#: ../lib/interface.c:835
-+#: ../lib/interface.c:850
- #, c-format
- msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
- msgstr "RX pakette:%llu vigu:%lu ära visatud:%lu ületäit:%lu kaadri vigu:%lu\n"
- 
--#: ../lib/interface.c:840
-+#: ../lib/interface.c:855
- #, c-format
- msgid "             compressed:%lu\n"
- msgstr "             pakitud:%lu\n"
- 
--#: ../lib/interface.c:852
-+#: ../lib/interface.c:895
- #, c-format
- msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
- msgstr "TX pakette:%llu vigu:%lu ära visatud:%lu ületäit:%lu carrier:%lu\n"
- 
--#: ../lib/interface.c:856
-+#: ../lib/interface.c:899
- #, c-format
- msgid "          collisions:%lu "
- msgstr "          kollisioone:%lu "
- 
--#: ../lib/interface.c:858
-+#: ../lib/interface.c:901
- #, c-format
- msgid "compressed:%lu "
- msgstr "pakitud:%lu "
- 
--#: ../lib/interface.c:860
-+#: ../lib/interface.c:903
- #, c-format
- msgid "txqueuelen:%d "
- msgstr "txqueuelen:%d "
- 
--#: ../lib/interface.c:862
-+#: ../lib/interface.c:905
- #, c-format
- msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
- msgstr "RX baite:%llu (%lu.%lu %s)  TX baite:%llu (%lu.%lu %s)\n"
- 
--#: ../lib/interface.c:873
-+#: ../lib/interface.c:916
- #, c-format
- msgid "Interrupt:%d "
- msgstr "katkestus:%d "
- 
- #. Only print devices using it for
- #. I/O maps
--#: ../lib/interface.c:876
-+#: ../lib/interface.c:919
- #, c-format
- msgid "Base address:0x%x "
- msgstr "baasaadress:0x%x "
- 
--#: ../lib/interface.c:878
-+#: ../lib/interface.c:921
- #, c-format
- msgid "Memory:%lx-%lx "
- msgstr "mälu:%lx-%lx "
- 
--#: ../lib/interface.c:881
-+#: ../lib/interface.c:924
- #, c-format
- msgid "DMA chan:%x "
- msgstr "DMA kanal:%x "
- 
- #: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr "Ei leidnud ühtegi kasutatavat aadressiperekonda\n"
- 
-@@ -2538,29 +3011,32 @@
- msgid "ip: argument is wrong: %s\n"
- msgstr "iptunnel: vale argument %s\n"
- 
--#: ../ipmaddr.c:58
-+#: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr "Kasutamine: ipmaddr [ add | del ] MULTIAADR dev STRING\n"
- 
--#: ../ipmaddr.c:59
-+#: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr "            ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- 
--#: ../ipmaddr.c:60
-+#: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr "            ipmaddr -V | -version\n"
- 
--#: ../ipmaddr.c:260
-+#: ../ipmaddr.c:263
- #, c-format
- msgid "family %d "
- msgstr "perekond %d "
- 
--#: ../ipmaddr.c:269
-+#: ../ipmaddr.c:272
- #, c-format
- msgid " users %d"
- msgstr " kasutajaid %d"
- 
--#: ../ipmaddr.c:355
-+#: ../ipmaddr.c:358
- msgid "Cannot create socket"
- msgstr "Ei saa avada soklit"
- 
-@@ -2575,6 +3051,7 @@
- msgstr "slattach: tty_lock: (%s): %s\n"
- 
- #: ../slattach.c:192
-+#, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr "slattach: ei saa PID faili kirjutada\n"
- 
-@@ -2594,18 +3071,22 @@
- msgstr "slattach: tty_hangup(RAISE): %s\n"
- 
- #: ../slattach.c:468
-+#, c-format
- msgid "slattach: tty name too long\n"
- msgstr "slattach: terminali nimi on liiga pikk\n"
- 
- #: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr "slattach: tty_open: ei saa lugeda jooksvat olekut\n"
- 
- #: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
- msgstr "slattach: tty_open: liiniprotokolli küsimine ebaõnnestus\n"
- 
- #: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr "slattach: tty_open: ei saa seada RAW moodi\n"
- 
-@@ -2615,6 +3096,7 @@
- msgstr "slattach: tty_open: ei saa seada kiiruseks %s bps\n"
- 
- #: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr "slattach: tty_open: ei saa seada 8N1 moodi\n"
- 
-@@ -2637,3 +3119,20 @@
- #, c-format
- msgid " interface %s\n"
- msgstr " liides %s\n"
-+
-+#~ msgid ""
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+#~ "<-''-\n"
-+#~ msgstr ""
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [netmask <nm>] "
-+#~ "pub\n"
-+
-+#~ msgid "%s: unknown interface: %s\n"
-+#~ msgstr "ifconfig: tundmatu liides %s: %s\n"
-+
-+#~ msgid "        -n, --numeric            dont resolve names\n"
-+#~ msgstr ""
-+#~ "        -n, --numeric            mitte lahendada numbreid nimedeks\n"
-+
-+#~ msgid "Routing table for `ddp' not yet supported.\n"
-+#~ msgstr "`ddp' jaoks ruutingutabelit veel ei oska\n"
---- net-tools-1.60.orig/po/de.po
-+++ net-tools-1.60/po/de.po
-@@ -1,106 +1,121 @@
--# $Id: de.po,v 1.10 2000/08/01 03:19:48 ecki Exp $
-+# $Id: de.po,v 1.11 2003/10/25 21:15:09 ecki Exp $
- # German translation for net-tools 1.51
- # Copyright (C) 1999 Ralf Bächle <ralf@gnu.org>
- msgid ""
- msgstr ""
- "Project-Id-Version: net-tools 1.51\n"
--"POT-Creation-Date: 2000-02-14 02:31+0100\n"
--"PO-Revision-Date: 1998-03-01 00:02+0100\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+"PO-Revision-Date: 2005-06-13 00:02+0100\n"
- "Last-Translator: Ralf Bächle <ralf@gnu.org>\n"
- "Language-Team:\n"
- "MIME-Version: 1.0\n"
- "Content-Type: text/plain; charset=iso8859-1\n"
- "Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:110 ../arp.c:269
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
--msgstr "arp: Hostname muß angegeben werden\n"
-+msgstr "arp: Hostname muss angegeben werden\n"
- 
--#: ../arp.c:207 ../arp.c:221
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
--msgstr "Kein ARP Eintrag für %s\n"
-+msgstr "Kein ARP-Eintrag für %s\n"
- 
--#: ../arp.c:239
-+#: ../arp.c:248
- #, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr "rarp: Kann Eintrag aus %s : %u nicht setzen.\n"
- 
--#: ../arp.c:243
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr "arp: unpassende Protokolltypen.\n"
- 
--#: ../arp.c:252
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
--msgstr "arp: Gerät ,,%s'' hat HW-Adresse %s ,,%s''.\n"
-+msgstr "arp: Gerät »%s« hat HW-Adresse %s »%s«.\n"
- 
--#: ../arp.c:282
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
--msgstr "arp: Hardwareadresse muß angegeben werden\n"
-+msgstr "arp: Hardwareadresse muss angegeben werden\n"
- 
--#: ../arp.c:290
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr "arp: ungültige Hardwareadresse\n"
- 
--#: ../arp.c:387
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr "arp: Kann %s nicht öffnen!\n"
- 
--#: ../arp.c:403
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr "arp: Formatfehler in Zeile %u von Etherfile %s.\n"
- 
--#: ../arp.c:416
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr "arp: Kann Eintrag auf Zeile %u von Etherdatei %s nicht setzen!\n"
- 
--#: ../arp.c:437
--msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-+#: ../arp.c:448
-+#, fuzzy, c-format
-+msgid ""
-+"Address                  HWtype  HWaddress           Flags Mask            "
-+"Iface\n"
- msgstr "Adresse\t\t\tHWTyp\tHWAdresse\t    Flags   Maske\t\t  Iface\n"
- 
--#: ../arp.c:467
-+#: ../arp.c:476
-+#, fuzzy
-+msgid "<from_interface>"
-+msgstr " Schnittstelle: %s\n"
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
--msgstr "(unvollsändig)"
-+msgstr "(unvollständig)"
- 
--#: ../arp.c:484
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr "%s (%s) auf "
- 
--#: ../arp.c:490
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr "<unvollständig> "
- 
--#: ../arp.c:496
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr "netzmaske %s "
- 
--#: ../arp.c:513
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr "auf %s\n"
- 
--#: ../arp.c:592
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr "Einträge: %d   Ignoriert: %d   Gefunden: %d\n"
- 
--#: ../arp.c:596
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr "%s (%s) -- kein Eintrag\n"
- 
--#: ../arp.c:598
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
--msgstr "arp: In %d Einträgen wurde kein Zutreffender gefunden.\n"
-+msgstr "arp: In %d Einträgen wurde kein zutreffender gefunden.\n"
- 
--#: ../arp.c:613
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-@@ -109,157 +124,165 @@
- "Benutzung:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<Hostname>]\n"
- 
--#: ../arp.c:614
-+#: ../arp.c:627
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
- msgstr "  arp [-v]          [-i <if>] -d  <Hostname> [pub][nopub]\n"
- 
--#: ../arp.c:615
-+#: ../arp.c:628
-+#, fuzzy, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
- msgstr "  arp [-vnD] [<HW>] [-i <if>] -f  <Dateiname>           <- Eintrag aus Datei hinzufügen\n"
- 
--#: ../arp.c:616
-+#: ../arp.c:629
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
- msgstr ""
- "  arp [-v]   [<HW>] [-i <if>] -s  <Rechnername> <hwaddr> [temp][nopub]\n"
- 
--#: ../arp.c:617
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <Hostname> <hwaddr> [netmask <nm>] pub\n"
--
--#: ../arp.c:618
-+#: ../arp.c:630
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
- msgstr "  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub\n"
- 
--#: ../arp.c:620
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
- msgstr "        -a                       Alle Hosts im BSD-Format anzeigen\n"
- 
--#: ../arp.c:621
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr "        -s, --set                Neuen ARP-Eintrag setzen\n"
- 
--#: ../arp.c:622
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr "        -d, --delete             Einen bestimmten Eintrag löschen\n"
- 
--#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr "        -v, --verbose            Ausführliche Ausgaben\n"
- 
--#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
--msgid "        -n, --numeric            dont resolve names\n"
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, fuzzy, c-format
-+msgid "        -n, --numeric            don't resolve names\n"
- msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
- 
--#: ../arp.c:625
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
--msgstr "        -i, --device             Netzwerksgerät (z.B. eth0) angeben\n"
-+msgstr "        -i, --device             Netzwerkgerät (z.B. eth0) angeben\n"
- 
--#: ../arp.c:626
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
- msgstr "        -D, --use-device         <hwaddr> von gegebenem Gerät lesen\n"
- 
--#: ../arp.c:627
-+#: ../arp.c:639
-+#, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr "        -A, -p, --protocol              Routentabelle anzeigen\n"
- 
--#: ../arp.c:628
-+#: ../arp.c:640
-+#, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
- "        -f, --file               Neue Einträge aus Datei lesen\n"
- "\n"
- 
--#: ../arp.c:630 ../rarp.c:181
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
- msgstr "  <HW>='-H <hw>' um Hardwareadresstyp anzugeben.  Standard: %s\n"
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr "  Liste möglicher Hardwaretypen, die ARP unterstützen:\n"
- 
--#: ../arp.c:664
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr "%s: Hardwaretyp nicht unterstützt!\n"
- 
--#: ../arp.c:668
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr "%s: Adressfamilie nicht unterstützt!\n"
- 
--#: ../arp.c:703
-+#: ../arp.c:716
-+#, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr "arp: -N noch nicht unterstützt.\n"
- 
--#: ../arp.c:713
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr "arp: %s: unbekannte Adressfamilie.\n"
- 
--#: ../arp.c:722
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr "arp: %s: unbekannter Hardwaretyp.\n"
- 
--#: ../arp.c:741
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
--msgstr "arp: %s: Kernel unterstützt nur ,,inet''.\n"
-+msgstr "arp: %s: Kernel unterstützt nur »inet«.\n"
- 
--#: ../arp.c:746
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr "arp: %s: Hardware unterstützt kein ARP.\n"
- 
--#: ../hostname.c:69
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
--msgstr "Rechnernamen auf ,,%s'' setzen\n"
-+msgstr "Rechnernamen auf »%s« setzen\n"
- 
--#: ../hostname.c:74
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr "%s: Nur Root darf den Rechnernamen ändern\n"
- 
--#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr "%s: name zu lang\n"
- 
--#: ../hostname.c:89
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
--msgstr "Setze Hostname auf ,,%s''\n"
-+msgstr "Setze Hostname auf »%s«\n"
- 
--#: ../hostname.c:94
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
--msgstr "%s: Nur Root darf then Rechnernamen ändern\n"
-+msgstr "%s: Nur Root darf den Rechnernamen ändern\n"
- 
--#: ../hostname.c:108
-+#: ../hostname.c:109
- #, c-format
- msgid "Setting domainname to `%s'\n"
--msgstr "Setze domainname auf ,,%s''\n"
-+msgstr "Setze domainname auf »%s«\n"
- 
--#: ../hostname.c:113
-+#: ../hostname.c:114
- #, c-format
- msgid "%s: you must be root to change the domain name\n"
- msgstr "%s: Nur Root darf den Domainnamen ändern\n"
-@@ -267,51 +290,56 @@
- #: ../hostname.c:131
- #, c-format
- msgid "Resolving `%s' ...\n"
--msgstr "Löse ,,%s'' auf ...\n"
-+msgstr "Löse »%s« auf ...\n"
- 
- #: ../hostname.c:137
- #, c-format
- msgid "Result: h_name=`%s'\n"
--msgstr "Ergebnis: h_name=,,%s''\n"
-+msgstr "Ergebnis: h_name=»%s«\n"
- 
- #: ../hostname.c:142
- #, c-format
- msgid "Result: h_aliases=`%s'\n"
--msgstr "Ergebnis: h_aliases=,,%s''\n"
-+msgstr "Ergebnis: h_aliases=»%s«\n"
- 
- #: ../hostname.c:147
- #, c-format
- msgid "Result: h_addr_list=`%s'\n"
--msgstr "Ergebnis: h_addr_list=,,%s''\n"
-+msgstr "Ergebnis: h_addr_list=»%s«\n"
- 
--#: ../hostname.c:209
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
--msgstr "%s: Kann ,,%s'' nicht öffnen\n"
-+msgstr "%s: Kann »%s« nicht öffnen\n"
- 
--#: ../hostname.c:223
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
- msgstr ""
- "Benutzung: hostname [-v] {Hostname|-F Datei} Hostname (aus Datei) setzen\n"
- 
--#: ../hostname.c:224
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
- msgstr ""
--"       domainname [-v] {nisdomain|-F file}   NIS Domainname (aus Datei) "
-+"       domainname [-v] {nisdomain|-F file}   NIS-Domainname (aus Datei) "
- "setzen.\n"
- 
--#: ../hostname.c:226
-+#: ../hostname.c:225
-+#, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
- msgstr "       nodename [-v] {Rechnername|-F Datei}\n"
- 
--#: ../hostname.c:228
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]\n"
- 
--#: ../hostname.c:229
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
-@@ -319,7 +347,8 @@
- "       hostname [-v]                         Hostnamen anzeigen\n"
- "\n"
- 
--#: ../hostname.c:230
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
-@@ -328,7 +357,8 @@
- "beenden.\n"
- "\n"
- 
--#: ../hostname.c:231
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
-@@ -336,43 +366,52 @@
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- 
--#: ../hostname.c:232
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr "    -s, --short           Kurzer Hostname\n"
- 
--#: ../hostname.c:233
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr "    -a, --alias           Namensalias\n"
- 
--#: ../hostname.c:234
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr "    -i, --ip-address      Adressen für den Hostnamen\n"
- 
--#: ../hostname.c:235
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr "    -f, --fqdn, --long    Langer Hostname (FQDN)\n"
- 
--#: ../hostname.c:236
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
--msgstr "    -d, --domain          DNS Domainname\n"
-+msgstr "    -d, --domain          DNS-Domainname\n"
- 
--#: ../hostname.c:237
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
--msgstr "    -y, --yp, --nis       NIS/YP Domainname\n"
-+msgstr "    -y, --yp, --nis       NIS/YP-Domainname\n"
- 
--#: ../hostname.c:239
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
--msgstr "    -n, --node            DECnet Knotennamen\n"
-+msgstr "    -n, --node            DECnet-Knotennamen\n"
- 
--#: ../hostname.c:241
-+#: ../hostname.c:240
-+#, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
- msgstr ""
--"    -F, --file            Hostnamen oder NIS Domainnamen aus Datei lesen\n"
-+"    -F, --file            Hostnamen oder NIS-Domainnamen aus Datei lesen\n"
- "\n"
- 
--#: ../hostname.c:243
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -380,395 +419,268 @@
- "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
- "   part of the FQDN) in the /etc/hosts file.\n"
- msgstr ""
--"   Dies Kommando setzt oder gibt den Hostnamen oder NIS Domainnamen aus.\n"
--"   Es ist ebenfalls möglich die DNS Domain oder den FQDN (langen Hostnamen)\n"
-+"   Dies Kommando setzt oder gibt den Hostnamen oder NIS-Domainnamen aus.\n"
-+"   Es ist ebenfalls möglich die DNS-Domain oder den FQDN (langen Hostnamen)\n"
- "   ausgeben zu lassen.  Außer wenn DNS oder NIS als Namensdienst verwendet\n"
--"   wird, können FQDN (Fully Qualified Domain Name) und DNS Domainname (welcher\n"
-+"   wird, können FQDN (Fully Qualified Domain Name) und DNS-Domainname (welcher\n"
- "   Teil des FQDNs ist) in /etc/hosts geändert werden.\n"
- 
- #: ../hostname.c:338
- #, c-format
- msgid "%s: You can't change the DNS domain name with this command\n"
--msgstr "%s: Mit diesem Program kann der DNS Domainname nicht geändert werden\n"
-+msgstr "%s: Mit diesem Programm kann der DNS-Domainname nicht geändert werden\n"
- 
- #: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
- msgstr ""
- "\n"
--"Wenn Bind oder NIS nicht zur Hostnamensauflösung benutzt werden, kann der "
--"DNS\n"
-+"Wenn Bind oder NIS nicht zur Hostnamensauflösung benutzt werden, kann der DNS\n"
- 
- #: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
--msgstr ""
--"Domainname (welcher Teil des FQDN ist) in der Datei /etc/hosts geändert "
--"werden.\n"
-+msgstr "Domainname (welcher Teil des FQDN ist) in der Datei /etc/hosts geändert werden.\n"
- 
- #: ../hostname.c:357
- #, c-format
- msgid "gethostname()=`%s'\n"
--msgstr "gethostname()=,,%s''\n"
-+msgstr "gethostname()=»%s«\n"
- 
- #: ../hostname.c:374
- #, c-format
- msgid "getdomainname()=`%s'\n"
--msgstr "getdomainname()=,,%s''\n"
-+msgstr "getdomainname()=»%s«\n"
- 
- #: ../hostname.c:389
- #, c-format
- msgid "getnodename()=`%s'\n"
--msgstr "getnodename()=,,%s''\n"
-+msgstr "getnodename()=»%s«\n"
- 
--#: ../ifconfig.c:159
--#, c-format
--msgid "%-9.9s Link encap:%s  "
--msgstr "%-9.9s Protokoll:%s  "
-+#: ../ifconfig.c:107
-+#, fuzzy, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr "SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb Flg\n"
- 
--#: ../ifconfig.c:164
--#, c-format
--msgid "HWaddr %s  "
--msgstr "Hardware Adresse %s  "
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, fuzzy, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
- 
--#: ../ifconfig.c:167
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
- #, c-format
--msgid "Media:%s"
--msgstr "Medium:%s"
-+msgid "No support for INET on this system.\n"
-+msgstr "INET ist auf diesem System nicht verfügbar.\n"
- 
--#: ../ifconfig.c:169
--msgid "(auto)"
--msgstr "(auto)"
-+#: ../ifconfig.c:193
-+#, fuzzy, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
- 
--#: ../ifconfig.c:176
--#, c-format
--msgid "          %s addr:%s "
--msgstr "          %s Adresse:%s "
-+#: ../ifconfig.c:202
-+#, fuzzy, c-format
-+msgid ""
-+"Usage:\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+msgstr ""
-+"Syntax:\n"
-+"  ifconfig [-a] [-i] [-v] <Schnittstelle> [[<AF>] <Adresse>]\n"
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:204
- #, c-format
--msgid " P-t-P:%s "
--msgstr " P-z-P:%s "
-+msgid "  [add <address>[/<prefixlen>]]\n"
-+msgstr "  [add <Adresse>[/<Präfixlänge>]]\n"
- 
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:205
- #, c-format
--msgid " Bcast:%s "
--msgstr " Bcast:%s "
-+msgid "  [del <address>[/<prefixlen>]]\n"
-+msgstr "  [del <Adresse>[/<Präfixlänge>]]\n"
- 
--#: ../ifconfig.c:184
-+#: ../ifconfig.c:206
- #, c-format
--msgid " Mask:%s\n"
--msgstr " Maske:%s\n"
-+msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+msgstr "  [[-]broadcast [<Adresse>]]  [[-]pointopoint [<Adresse>]]\n"
- 
--#: ../ifconfig.c:201
-+#: ../ifconfig.c:207
- #, c-format
--msgid "          inet6 addr: %s/%d"
--msgstr "          inet6 Adresse: %s/%d"
--
--#: ../ifconfig.c:203
--msgid " Scope:"
--msgstr " Gültigkeitsbereich:"
--
--#: ../ifconfig.c:206
--msgid "Global"
--msgstr "Global"
-+msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+msgstr "  [netmask <Adresse>]  [dstaddr <Adresse>]  [tunnel <Adresse>]\n"
- 
--#: ../ifconfig.c:209
--msgid "Link"
--msgstr "Verbindung"
-+#: ../ifconfig.c:210
-+#, c-format
-+msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+msgstr "  [outfill <NN>] [keepalive <NN>]\n"
- 
- #: ../ifconfig.c:212
--msgid "Site"
--msgstr "Standort"
--
--#: ../ifconfig.c:215
--msgid "Compat"
--msgstr "Kompatibilität"
--
--#: ../ifconfig.c:218
--msgid "Host"
--msgstr "Maschine"
--
--#: ../ifconfig.c:221
--msgid "Unknown"
--msgstr "Unbekannt"
--
--#: ../ifconfig.c:236
- #, c-format
--msgid "          IPX/Ethernet II addr:%s\n"
--msgstr "          IPX/Ethernet II Adresse:%s\n"
-+msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+msgstr "  [hw <HW> <Adresse>]  [metric <NN>]  [mtu <NN>]\n"
- 
--#: ../ifconfig.c:239
-+#: ../ifconfig.c:213
- #, c-format
--msgid "          IPX/Ethernet SNAP addr:%s\n"
--msgstr "          IPX/Ethernet SNAP Adresse:%s\n"
-+msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- 
--#: ../ifconfig.c:242
-+#: ../ifconfig.c:214
- #, c-format
--msgid "          IPX/Ethernet 802.2 addr:%s\n"
--msgstr "          IPX/Ethernet 802.2 Adresse:%s\n"
-+msgid "  [multicast]  [[-]promisc]\n"
-+msgstr "  [multicast]  [[-]promisc]\n"
- 
--#: ../ifconfig.c:245
-+#: ../ifconfig.c:215
- #, c-format
--msgid "          IPX/Ethernet 802.3 addr:%s\n"
--msgstr "          IPX/Ethernet 802.3 Adresse:%s\n"
-+msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <Typ>]\n"
- 
--#: ../ifconfig.c:255
-+#: ../ifconfig.c:217
- #, c-format
--msgid "          EtherTalk Phase 2 addr:%s\n"
--msgstr "          EtherTalk Phase 2 Adresse:%s\n"
-+msgid "  [txqueuelen <NN>]\n"
-+msgstr "  [txqueuelen <Länge>]\n"
- 
--#: ../ifconfig.c:264
-+#: ../ifconfig.c:220
- #, c-format
--msgid "          econet addr:%s\n"
--msgstr "          econet Adresse:%s\n"
--
--#: ../ifconfig.c:270
--msgid "[NO FLAGS] "
--msgstr "[KEINE FLAGS] "
--
--#: ../ifconfig.c:272
--msgid "UP "
--msgstr "UP "
--
--#: ../ifconfig.c:274
--msgid "BROADCAST "
--msgstr "BROADCAST "
--
--#: ../ifconfig.c:276
--msgid "DEBUG "
--msgstr "DEBUG "
--
--#: ../ifconfig.c:278
--msgid "LOOPBACK "
--msgstr "LOOPBACK "
--
--#: ../ifconfig.c:280
--msgid "POINTOPOINT "
--msgstr "PUNKTZUPUNKT "
--
--#: ../ifconfig.c:282
--msgid "NOTRAILERS "
--msgstr "NOTRAILERS "
-+msgid "  [[-]dynamic]\n"
-+msgstr "  [[-]dynamic]\n"
- 
--#: ../ifconfig.c:284
--msgid "RUNNING "
--msgstr "RUNNING "
-+#: ../ifconfig.c:222
-+#, c-format
-+msgid ""
-+"  [up|down] ...\n"
-+"\n"
-+msgstr ""
-+"  [up|down] ...\n"
-+"\n"
- 
--#: ../ifconfig.c:286
--msgid "NOARP "
--msgstr "NOARP "
-+#: ../ifconfig.c:224
-+#, c-format
-+msgid "  <HW>=Hardware Type.\n"
-+msgstr "  <HW>=Hardwaretyp.\n"
- 
--#: ../ifconfig.c:288
--msgid "PROMISC "
--msgstr "PROMISC "
-+#: ../ifconfig.c:225
-+#, c-format
-+msgid "  List of possible hardware types:\n"
-+msgstr "  Liste möglicher Hardwaretypen:\n"
- 
--#: ../ifconfig.c:290
--msgid "ALLMULTI "
--msgstr "ALLMULTI "
-+#. 1 = ARPable
-+#: ../ifconfig.c:227
-+#, c-format
-+msgid "  <AF>=Address family. Default: %s\n"
-+msgstr "  <AF>=Adressfamilie.  Standardwert: %s\n"
- 
--#: ../ifconfig.c:292
--msgid "SLAVE "
--msgstr "SLAVE "
-+#: ../ifconfig.c:228
-+#, c-format
-+msgid "  List of possible address families:\n"
-+msgstr "  List der möglichen Adressfamilien:\n"
- 
--#: ../ifconfig.c:294
--msgid "MASTER "
--msgstr "MASTER "
-+#: ../ifconfig.c:303
-+#, c-format
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:296
--msgid "MULTICAST "
--msgstr "MULTICAST "
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:299
--msgid "DYNAMIC "
--msgstr "DYNAMIC "
-+#: ../ifconfig.c:380
-+#, c-format
-+msgid "Unknown media type.\n"
-+msgstr "Typ des Mediums unbekannt.\n"
- 
--#: ../ifconfig.c:302
-+#: ../ifconfig.c:417
- #, c-format
--msgid " MTU:%d  Metric:%d"
--msgstr " MTU:%d  Metric:%d"
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
- 
--#: ../ifconfig.c:306
-+#: ../ifconfig.c:429
- #, c-format
--msgid "  Outfill:%d  Keepalive:%d"
--msgstr "  Outfill:%d  Keepalive:%d"
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:320
-+#: ../ifconfig.c:441
- #, c-format
--msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
- msgstr ""
--"Empfangene Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Rahmen:%lu\n"
- 
--#: ../ifconfig.c:325
-+#: ../ifconfig.c:465
- #, c-format
--msgid "             compressed:%lu\n"
--msgstr "             komprimiert:%lu\n"
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:329
-+#: ../ifconfig.c:523
- #, c-format
--msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
- msgstr ""
--"Verschickte Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Träger:%lu\n"
- 
--#: ../ifconfig.c:333
-+#: ../ifconfig.c:652
- #, c-format
--msgid "          collisions:%lu "
--msgstr "          Kollisionen:%lu "
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:335
-+#: ../ifconfig.c:684
- #, c-format
--msgid "compressed:%lu "
--msgstr "Komprimiert:%lu "
-+msgid "hw address type `%s' has no handler to set address. failed.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:337
-+#: ../ifconfig.c:693
- #, c-format
--msgid "txqueuelen:%d "
--msgstr "Sendewarteschlangenlänge:%d "
-+msgid "%s: invalid %s address.\n"
-+msgstr "%s: ungültige %s Adresse.\n"
- 
--#: ../ifconfig.c:345
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
- #, c-format
--msgid "Interrupt:%d "
--msgstr "Interrupt:%d "
--
--#. Only print devices using it for
--#. I/O maps
--#: ../ifconfig.c:348
--#, c-format
--msgid "Base address:0x%x "
--msgstr "Basisadresse:0x%x "
--
--#: ../ifconfig.c:350
--#, c-format
--msgid "Memory:%lx-%lx "
--msgstr "Speicher:%lx-%lx "
--
--#: ../ifconfig.c:353
--#, c-format
--msgid "DMA chan:%x "
--msgstr "DMA Kanal:%x "
-+msgid "No support for INET6 on this system.\n"
-+msgstr "INET6 ist auf diesem System nicht verfügbar.\n"
- 
--#: ../ifconfig.c:384 ../ifconfig.c:405
-+#: ../ifconfig.c:780 ../ifconfig.c:871
- #, c-format
--msgid "%s: unknown interface: %s\n"
--msgstr "%s: unbekannte Schnittstelle: %s\n"
--
--#: ../ifconfig.c:421
--msgid ""
--"Usage:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
--msgstr ""
--"Syntax:\n"
--"  ifconfig [-a] [-i] [-v] <Schnittstelle> [[<AF>] <Adresse>]\n"
--
--#: ../ifconfig.c:425
--msgid "  [add <address>[/<prefixlen>]]\n"
--msgstr "  [add <Adresse>[/<Prefixlänge>]]\n"
--
--#: ../ifconfig.c:427
--msgid "  [del <address>[/<prefixlen>]]\n"
--msgstr "  [del <Adresse>[/<Prefixlänge>]]\n"
--
--#: ../ifconfig.c:432
--msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
--msgstr "  [[-]broadcast [<Adresse>]]  [[-]pointopoint [<Adresse>]]\n"
--
--#: ../ifconfig.c:433
--msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
--msgstr "  [netmask <Addresse>]  [dstaddr <Adresse>]  [tunnel <Adresse>]\n"
--
--#: ../ifconfig.c:436
--msgid "  [outfill <NN>] [keepalive <NN>]\n"
--msgstr "  [outfill <NN>] [keepalive <NN>]\n"
--
--#: ../ifconfig.c:438
--msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
--msgstr "  [hw <HW> <Adresse>]  [metric <NN>]  [mtu <NN>]\n"
--
--#: ../ifconfig.c:439
--msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--
--#: ../ifconfig.c:440
--msgid "  [multicast]  [[-]promisc]\n"
--msgstr "  [multicast]  [[-]promisc]\n"
--
--#: ../ifconfig.c:441
--msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
--msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <Typ>]\n"
--
--#: ../ifconfig.c:443
--msgid "  [txqueuelen <NN>]\n"
--msgstr "  [txqueuelen <Länge>]\n"
--
--#: ../ifconfig.c:446
--msgid "  [[-]dynamic]\n"
--msgstr "  [[-]dynamic]\n"
--
--#: ../ifconfig.c:448
--msgid ""
--"  [up|down] ...\n"
--"\n"
-+msgid "Interface %s not initialized\n"
- msgstr ""
--"  [up|down] ...\n"
--"\n"
--
--#: ../ifconfig.c:450
--msgid "  <HW>=Hardware Type.\n"
--msgstr "  <HW>=Hardwaretyp.\n"
--
--#: ../ifconfig.c:451
--msgid "  List of possible hardware types:\n"
--msgstr "  Liste möglicher Hardwaretypen:\n"
--
--#. 1 = ARPable
--#: ../ifconfig.c:453
--#, c-format
--msgid "  <AF>=Address family. Default: %s\n"
--msgstr "  <AF>=Adressfamilie.  Standardwert: %s\n"
--
--#: ../ifconfig.c:454
--msgid "  List of possible address families:\n"
--msgstr "  List der möglichen Adressfamilien:\n"
--
--#: ../ifconfig.c:593
--msgid "Unknown media type.\n"
--msgstr "Typ des Mediums unbekannt.\n"
- 
--#: ../ifconfig.c:881
--#, c-format
--msgid "%s: invalid %s address.\n"
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, fuzzy, c-format
-+msgid "Bad address.\n"
- msgstr "%s: ungültige %s Adresse.\n"
- 
--#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
--msgid "No support for INET6 on this system.\n"
--msgstr "INET6 ist auf diesem System nicht verfügbar.\n"
--
--#: ../ifconfig.c:983
-+#: ../ifconfig.c:885
-+#, c-format
- msgid "Address deletion not supported on this system.\n"
--msgstr "Das Löschen von Adressen ist auf diesem System nicht unterstützt.\n"
-+msgstr "Das Löschen von Adressen wird auf diesem System nicht unterstützt.\n"
- 
--#: ../ifconfig.c:1066
--msgid "No support for INET on this system.\n"
--msgstr "INET ist auf diesem System nicht verfügbar.\n"
-+#: ../ifconfig.c:957
-+#, fuzzy, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "Kann die Adressen der Familie %d nicht setzen.\n"
- 
--#: ../ifconfig.c:1076
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr "ECONET wird auf diesem System nicht unterstützt.\n"
- 
--#: ../ifconfig.c:1084
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr "Kann die Adressen der Familie %d nicht setzen.\n"
- 
--#: ../netstat.c:383
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
--msgstr ""
--"(Für \"-p\": geteuid()=%d konnte keine Information gelesen werden; sie "
--"sollten Root sein.)\n"
-+msgstr "(Für \"-p\": geteuid()=%d konnte keine Information gelesen werden; sie sollten Root sein.)\n"
- 
--#: ../netstat.c:387
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
-@@ -776,198 +688,220 @@
- "(Es konnten nicht alle Prozesse identifiziert werden; Informationen über\n"
- "nicht-eigene Processe werden nicht angezeigt; Root kann sie anzeigen.)\n"
- 
--#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr "HÖRT"
- 
--#: ../netstat.c:395
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr "VERBINGSAUFBAU GESCHICKT"
- 
--#: ../netstat.c:396 ../netstat.c:1168
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr "VERBINDUNGSABBAU GESCHICKT"
- 
--#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr "VERBUNDEN"
- 
--#: ../netstat.c:419
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr "Aktive NET/ROM Sockets\n"
- 
--#: ../netstat.c:420
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
--msgstr ""
--"Benutzer   Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
-+msgstr "Benutzer   Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Recv-Q\n"
- 
--#: ../netstat.c:430 ../netstat.c:1208
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr "Probleme beim Lesen von %s\n"
- 
--#: ../netstat.c:465
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr "SYN_SENT"
- 
--#: ../netstat.c:466
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr "SYN_RECV"
- 
--#: ../netstat.c:467
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr "FIN_WAIT1"
- 
--#: ../netstat.c:468
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr "FIN_WAIT2"
- 
--#: ../netstat.c:469
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr "TIME_WAIT"
- 
--#: ../netstat.c:470
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr "CLOSE"
- 
--#: ../netstat.c:471
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr "CLOSE_WAIT"
- 
--#: ../netstat.c:472
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr "LAST_ACK"
- 
--#: ../netstat.c:473
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr "LISTEN"
- 
--#: ../netstat.c:474
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr "CLOSING"
- 
--#: ../netstat.c:544
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr "Warnung, fehlerhafte igmp6 line %d.\n"
- 
--#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
--#: ../netstat.c:935 ../netstat.c:940
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr "netstat: Nicht unterstützte Adressfamilie %d!\n"
- 
--#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr "Warnung, fehlerhafte igmp-Zeile %d.\n"
- 
--#: ../netstat.c:666
-+#: ../netstat.c:677
-+#, fuzzy, c-format
-+msgid "Active X.25 sockets\n"
-+msgstr "Aktive AX.25 Sockets\n"
-+
-+#. IMHO, Vr/Vs is not very usefull --SF
-+#: ../netstat.c:679
-+#, fuzzy, c-format
-+msgid ""
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
-+msgstr "Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Empf-Q\n"
-+
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr "Warnung, fehlerhafte TCP Zeile.\n"
- 
--#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr "aus (0.00/%ld/%d)"
- 
--#: ../netstat.c:708
-+#: ../netstat.c:804
- #, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr "ein (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:713
-+#: ../netstat.c:809
- #, fuzzy, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr "ein%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:718
-+#: ../netstat.c:814
- #, fuzzy, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr "ein%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr "unkn-%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:799
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr "Warnung, fehlerhafe UDP-Zeile.\n"
- 
--#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr "UNBEKANNT"
- 
--#: ../netstat.c:860 ../netstat.c:980
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr "ein%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:949
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr "Warnung, fehlerhafte raw-Zeile.\n"
- 
--#: ../netstat.c:1028
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr "Warnung, fehlerhafte UNIX-Zeile.\n"
- 
--#: ../netstat.c:1055
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr "STREAM"
- 
--#: ../netstat.c:1059
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr "DGRAM"
- 
--#: ../netstat.c:1063
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr "RAW"
- 
--#: ../netstat.c:1067
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr "RDM"
- 
--#: ../netstat.c:1071
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
--msgstr "SEQPACKET"
-+msgstr "SEQPAKET"
- 
--#: ../netstat.c:1080
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr "FREI"
- 
--#: ../netstat.c:1096
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr "VERBINDUNGSAUFBAU"
- 
--#: ../netstat.c:1100
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr "VERBUNDEN"
- 
--#: ../netstat.c:1104
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr "VERBINDUNGSABBAU"
- 
--#: ../netstat.c:1135
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
--msgstr "Aktive Sockets in der UNIX Domäne "
-+msgstr "Aktive Sockets in der UNIX-Domäne "
- 
--#: ../netstat.c:1137 ../netstat.c:1666
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr "(Server und stehende Verbindungen)"
- 
--#: ../netstat.c:1140 ../netstat.c:1669
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr "(Nur Server)"
- 
--#: ../netstat.c:1142 ../netstat.c:1671
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr "(ohne Server)"
- 
--#: ../netstat.c:1145
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
-@@ -975,90 +909,90 @@
- "\n"
- "Proto RefZäh Flaggen     Typ        Zustand       I-Node"
- 
--#: ../netstat.c:1147
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr " Pfad\n"
- 
--#: ../netstat.c:1167
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr "SABM GESCHICKT"
- 
--#: ../netstat.c:1170
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr "WIEDERHERSTELLUNG"
- 
--#: ../netstat.c:1184
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr "Aktive AX.25 Sockets\n"
- 
--#: ../netstat.c:1185
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr "Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Empf-Q\n"
- 
--#: ../netstat.c:1228
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr "Problem beim Lesen von Daten von %s\n"
- 
--#: ../netstat.c:1279
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
- "State"
- msgstr ""
- "Aktive IPX Sockets\n"
--"Proto Recv-Q Send-Q Lokale Adresse             Gegenaddress               "
-+"Proto Recv-Q Send-Q Lokale Adresse             Gegenadresse               "
- "Zustand"
- 
--#: ../netstat.c:1281
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr " Benutzer"
- 
--#: ../netstat.c:1315
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr "VERBUNDEN"
- 
--#: ../netstat.c:1323
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr "UNB."
- 
--#: ../netstat.c:1367
--msgid "     - no statistics available -"
--msgstr "     - keine Statistiken verfügbar -"
--
--#: ../netstat.c:1370
--msgid "[NO FLAGS]"
--msgstr "[KEINE FLAGS]"
--
--#: ../netstat.c:1400
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
--msgstr "Kernel Schnittstellentabelle\n"
-+msgstr "Kernel-Schnittstellentabelle\n"
- 
--#: ../netstat.c:1401
-+#: ../netstat.c:1465
-+#, fuzzy, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
--"Flg\n"
--msgstr ""
--"SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
-+msgstr "SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb Flg\n"
- 
--#: ../netstat.c:1404
-+#: ../netstat.c:1469
- msgid "missing interface information"
--msgstr "Fehlende Interfaceinformation"
-+msgstr "Fehlende Interfaceinformationen"
- 
--#: ../netstat.c:1425
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
- "Benutzung: netstat [-veenNcCF] [<Af>] -r\n"
- "           netstat {-V|--version|-h|--help}\n"
- 
--#: ../netstat.c:1426
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr "       netstat [-vnNcaeol] [<Socket> ...]\n"
- 
--#: ../netstat.c:1427
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
-@@ -1066,27 +1000,32 @@
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- 
--#: ../netstat.c:1429
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr "        -r, --route              Routentabelle anzeigen\n"
- 
--#: ../netstat.c:1430
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr "        -i, --interfaces         Schnittstellentabelle auflisten\n"
- 
--#: ../netstat.c:1431
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr ""
- "        -g, --groups             Mitgliedschaft in Multicastgruppen "
- "anzeigen\n"
- 
--#: ../netstat.c:1432
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
- msgstr ""
- "        -s, --statistics         Netzwerksstatistiken anzeigen (wie SNMP)\n"
- 
--#: ../netstat.c:1434
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
-@@ -1094,23 +1033,38 @@
- "        -M, --masquerade         Maskierte Verbindungen auflisten\n"
- "\n"
- 
--#: ../netstat.c:1438 ../route.c:87
-+#: ../netstat.c:1505
-+#, fuzzy, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
-+msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-+
-+#: ../netstat.c:1506
-+#, fuzzy, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
-+msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-+
-+#: ../netstat.c:1507
-+#, fuzzy, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
-+msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-+
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr "        -N, --symbolic           Hardwarenamen auflösen\n"
- 
--#: ../netstat.c:1439 ../route.c:88
--#, fuzzy
-+#: ../netstat.c:1509 ../route.c:88
-+#, fuzzy, c-format
- msgid "        -e, --extend             display other/more information\n"
--msgstr ""
--"        -e, --extend             Weitere / zusätzliche Informationen "
--"anzeigen\n"
-+msgstr "        -e, --extend             Weitere / zusätzliche Informationen anzeigen\n"
- 
--#: ../netstat.c:1440
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
--msgstr ""
--"        -p, --programs           PID/Programmnamen für Sockets anzeigen\n"
-+msgstr "        -p, --programs           PID/Programmnamen für Sockets anzeigen\n"
- 
--#: ../netstat.c:1441
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
-@@ -1118,24 +1072,27 @@
- "        -c, --continuous         Anzeige laufend aktualisieren\n"
- "\n"
- 
--#: ../netstat.c:1442
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
- msgstr ""
- "        -l, --listening          Empfangsbereite Serversockets auflisten\n"
- 
--#: ../netstat.c:1443
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
- msgstr ""
- "        -a, --all, --listening   Alle Sockets anzeigen (normal: nur "
- "verbundene)\n"
- 
--#: ../netstat.c:1444
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr "        -o, --timers             Timer auflisten\n"
- 
--#: ../netstat.c:1445 ../route.c:89
--#, fuzzy
-+#: ../netstat.c:1515 ../route.c:89
-+#, fuzzy, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
-@@ -1143,7 +1100,8 @@
- "        -F, --fib                Forwarding Infomation Base anzeigen "
- "(Standard)\n"
- 
--#: ../netstat.c:1446 ../route.c:90
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
-@@ -1151,110 +1109,118 @@
- "        -C, --cache              Routencache statt FIB anzeigen\n"
- "\n"
- 
--#: ../netstat.c:1448
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- 
--#: ../netstat.c:1449 ../route.c:92
--#, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-+#: ../netstat.c:1519
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr "  <AF>=,,-A <af>'' or ,,--<af>'' benutzen. Standard: %s\n"
- 
--#: ../netstat.c:1450 ../route.c:93
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
- msgstr "  Liste möglicher Adressfamilien, die Routen unterstützen:\n"
- 
--#: ../netstat.c:1663
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr "Aktive Internetverbindungen "
- 
--#: ../netstat.c:1673
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- 
--#: ../netstat.c:1675
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr " Benutzer   Inode     "
- 
--#: ../netstat.c:1678
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr " Timer"
- 
--#: ../netstat.c:1708
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
--msgstr "IPv4 Gruppenmitgliedschaften\n"
-+msgstr "IPv4-Gruppenmitgliedschaften\n"
- 
--#: ../netstat.c:1709
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr "Schnittstelle   RefZäh Grupp\n"
- 
--#: ../rarp.c:43
-+#: ../rarp.c:44
- msgid "This kernel does not support RARP.\n"
- msgstr "Dieser Kernel unterstützt kein RARP.\n"
- 
--#: ../rarp.c:82
-+#: ../rarp.c:83
- #, c-format
- msgid "no RARP entry for %s.\n"
--msgstr "Kein RARP Eintrag für %s.\n"
-+msgstr "Kein RARP-Eintrag für %s.\n"
- 
--#: ../rarp.c:95
-+#: ../rarp.c:96
- #, c-format
- msgid "%s: bad hardware address\n"
- msgstr "%s: fehlerhafte Hardwareadresse\n"
- 
--#: ../rarp.c:127
-+#: ../rarp.c:128
- #, c-format
- msgid "rarp: cannot open file %s:%s.\n"
- msgstr "rarp: kann Datei %s:%s nicht öffnen.\n"
- 
--#: ../rarp.c:139
-+#: ../rarp.c:140
- #, c-format
- msgid "rarp: format error at %s:%u\n"
- msgstr "rarp: Formatfehler bei %s:%u\n"
- 
--#: ../rarp.c:143 ../rarp.c:287
-+#: ../rarp.c:144 ../rarp.c:289
- #, c-format
- msgid "rarp: %s: unknown host\n"
- msgstr "rarp: %s: Unbekannter Host\n"
- 
--#: ../rarp.c:146
-+#: ../rarp.c:147
- #, c-format
- msgid "rarp: cannot set entry from %s:%u\n"
- msgstr "rarp: Kann Eintrag aus %s:%u nicht setzen.\n"
- 
--#: ../rarp.c:175
-+#: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
--msgstr ""
--"Benutzung: rarp -a                               Einträge im Cache listen.\n"
-+msgstr "Benutzung: rarp -a                               Einträge im Cache listen.\n"
- 
--#: ../rarp.c:176
-+#: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
--msgstr ""
--"       rarp -d <hostname>                    Eintrag aus dem Cache löschen.\n"
-+msgstr "       rarp -d <hostname>                    Eintrag aus dem Cache löschen.\n"
- 
--#: ../rarp.c:177
-+#: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
--msgstr ""
--"       rarp [<HW>] -s <hostname> <hwaddr>    Eintrag zum Cache zufügen.\n"
-+msgstr "       rarp [<HW>] -s <hostname> <hwaddr>    Eintrag zum Cache zufügen.\n"
- 
--#: ../rarp.c:178
-+#: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
--msgstr ""
--"       rarp -f                               Einträge aus /etc/ethers "
--"zufügen.\n"
-+msgstr "       rarp -f                               Einträge aus /etc/ethers zufügen.\n"
- 
--#: ../rarp.c:179
-+#: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
-@@ -1262,24 +1228,26 @@
- "       rarp -V                               Programmversion anzeigen.\n"
- "\n"
- 
--#: ../rarp.c:236
-+#: ../rarp.c:238
- #, c-format
- msgid "%s: illegal option mix.\n"
- msgstr "%s: Unerlaubte Mischung von Optionen.\n"
- 
--#: ../rarp.c:267
-+#: ../rarp.c:269
- #, c-format
- msgid "rarp: %s: unknown hardware type.\n"
--msgstr "rarp: %s: unknown hardware type.\n"
-+msgstr "rarp: %s: unbekannter Hardwaretyp.\n"
- 
--#: ../route.c:79
-+#: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
- "Benutzung: route [-nNvee] [-FC] [<AF>]           Kernelroutentabelle "
- "anzeigen\n"
- 
--#: ../route.c:80
-+#: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
-@@ -1287,14 +1255,15 @@
- "       route [-v] [-FC] {add|del|flush} ...  Routentabelle für AF ändern.\n"
- "\n"
- 
--#: ../route.c:82
-+#: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
--msgstr ""
--"       route {-h|--help} [<AF>]              Genaue Syntax für AF anzeigen.\n"
-+msgstr "       route {-h|--help} [<AF>]              Genaue Syntax für AF anzeigen.\n"
- 
--#: ../route.c:83
-+#: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
-@@ -1304,590 +1273,891 @@
- "Ende.\n"
- "\n"
- 
-+#: ../route.c:92
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>=,,-A <af>'' or ,,--<af>'' benutzen. Standard: %s\n"
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr "Benutzung: plipconfig [-a] [-i] [-v] Interface\n"
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr "                  [nibble NN] [trigger NN]\n"
- 
- #: ../plipconfig.c:68
--#, fuzzy
-+#, c-format
- msgid "       plipconfig -V | --version\n"
--msgstr "       plipconfig -V\n"
-+msgstr "       plipconfig -V | --version\n"
- 
- #: ../plipconfig.c:74
- #, c-format
- msgid "%s\tnibble %lu  trigger %lu\n"
- msgstr "%s\tnibble %lu  trigger %lu\n"
- 
--#: ../iptunnel.c:79
-+#: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr "Benutzung: iptunnel { add | change | del | show } [ NAME ]\n"
- 
--#: ../iptunnel.c:80
-+#: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
- msgstr "          [ mode { ipip | gre | sit } ] [ remote ADR ] [ local ADR ]\n"
- 
--#: ../iptunnel.c:81
-+#: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr "          [ [i|o]seq ] [ [i|o]key SCHLÜSSEL ] [ [i|o]csum ]\n"
- 
--#: ../iptunnel.c:82
--#, fuzzy
-+#: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
--msgstr ""
--"          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_GERÄt ]\n"
--"\n"
-+msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_GERÄt ]\n"
- 
--#: ../iptunnel.c:83
-+#: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
- msgstr ""
-+"       iptunnel -V | --version\n"
-+"\n"
- 
--#: ../iptunnel.c:84
-+#: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr "Wobei: NAME := ZEICHENKETTE\n"
- 
--#: ../iptunnel.c:85
-+#: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr "       ADR := { IP_ADRESSE | any }\n"
- 
--#: ../iptunnel.c:86
-+#: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr "       TOS  := { NUMBER | inherit }\n"
- 
--#: ../iptunnel.c:87
-+#: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr "       TTL  := { 1..255 | inherit }\n"
- 
--#: ../iptunnel.c:88
-+#: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr "       KEY  := { DOTTED_QUAD | ZAHL }\n"
- 
--#: ../iptunnel.c:326
-+#: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr "Schlüssel sind mit ipip und sit nicht erlaubt.\n"
- 
--#: ../iptunnel.c:346
-+#: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr "Ein Broadcasttunnel ist nur mit einer Quelladresse möglich\n"
- 
--#: ../iptunnel.c:361
-+#: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr "ttl != 0 und noptmudisc sind inkompatibel\n"
- 
--#: ../iptunnel.c:373
-+#: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr ""
- "Die Tunnelbetriebsart (ipip, fre oder sit) kann nicht festgestellt werden\n"
- 
--#: ../iptunnel.c:411
-+#: ../iptunnel.c:417
- #, c-format
- msgid "%s: %s/ip  remote %s  local %s "
- msgstr "%s: %s/ip  Gegenseite %s  lokal %s "
- 
--#: ../iptunnel.c:415
-+#: ../iptunnel.c:421
- msgid "unknown"
- msgstr "Unbekannt"
- 
--#: ../iptunnel.c:447
-+#: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr "  Pakete außer der Reihenfolge fallenlassen.\n"
- 
--#: ../iptunnel.c:449
-+#: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr "  Prüfsumme im empfangenen Paket wird benötigt.\n"
- 
--#: ../iptunnel.c:451
-+#: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr "  Pakete in Reihenfolge ausgeben.\n"
- 
--#: ../iptunnel.c:453
-+#: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr "  Prüfsumme für ausgegebene Pakete berechnen.\n"
- 
--#: ../iptunnel.c:481
-+#: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
--msgstr "Falsches Format von /proc/net/dev. Tut mir leid\n"
-+msgstr "Falsches Format von /proc/net/dev. Tut mir leid.\n"
- 
--#: ../iptunnel.c:494
-+#: ../iptunnel.c:500
- #, c-format
- msgid "Failed to get type of [%s]\n"
- msgstr "Kann den Typ von [%s] nicht holen\n"
- 
--#: ../iptunnel.c:510
-+#: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr "RX: Pakete     Bytes        Fehler CsumErrs OutOfSeq Mcasts\n"
- 
--#: ../iptunnel.c:513
-+#: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr "TX: Pakete     Bytes        Fehler DeadLoop NoRoute  NoBufs\n"
- 
--#: ../statistics.c:45
-+#: ../statistics.c:47
- msgid "ICMP input histogram:"
--msgstr "ICMP Eingabehistogramm:"
-+msgstr "ICMP-Eingabehistogramm:"
- 
--#: ../statistics.c:46
-+#: ../statistics.c:48
- msgid "ICMP output histogram:"
--msgstr "ICMP Ausgabehistogramm:"
-+msgstr "ICMP-Ausgabehistogramm:"
- 
--#: ../statistics.c:63
-+#: ../statistics.c:65
- #, c-format
- msgid "Forwarding is %s"
- msgstr "Weiterleitung ist %s"
- 
--#: ../statistics.c:64
--#, c-format
--msgid "Default TTL is %d"
-+#: ../statistics.c:66
-+#, fuzzy, c-format
-+msgid "Default TTL is %u"
- msgstr "Standard-TTL ist %d"
- 
--#: ../statistics.c:65
--#, c-format
--msgid "%d total packets received"
--msgstr "%d Pakete insgesamt empfangen"
-+#: ../statistics.c:67
-+#, fuzzy, c-format
-+msgid "%u total packets received"
-+msgstr "%d Pakete insgesamt empfangen"
- 
--#: ../statistics.c:66
--#, c-format
--msgid "%d with invalid headers"
--msgstr "%d with ungültigen Headern"
-+#: ../statistics.c:68
-+#, fuzzy, c-format
-+msgid "%u with invalid headers"
-+msgstr "%d mit ungültigen Headern"
- 
--#: ../statistics.c:67
--#, c-format
--msgid "%d with invalid addresses"
-+#: ../statistics.c:69
-+#, fuzzy, c-format
-+msgid "%u with invalid addresses"
- msgstr "%d mit ungültigen Adressen"
- 
--#: ../statistics.c:68
--#, c-format
--msgid "%d forwarded"
-+#: ../statistics.c:70
-+#, fuzzy, c-format
-+msgid "%u forwarded"
- msgstr "%d weitergeleitet"
- 
--#: ../statistics.c:69
--#, c-format
--msgid "%d with unknown protocol"
-+#: ../statistics.c:71
-+#, fuzzy, c-format
-+msgid "%u with unknown protocol"
- msgstr "%d mit unbekanntem Protokoll"
- 
--#: ../statistics.c:70
--#, c-format
--msgid "%d incoming packets discarded"
-+#: ../statistics.c:72
-+#, fuzzy, c-format
-+msgid "%u incoming packets discarded"
- msgstr "%d eingehende Pakete weggeworfen"
- 
--#: ../statistics.c:71
--#, c-format
--msgid "%d incoming packets delivered"
-+#: ../statistics.c:73
-+#, fuzzy, c-format
-+msgid "%u incoming packets delivered"
- msgstr "%d eingehende Pakete zugestellt"
- 
--#: ../statistics.c:72
--#, c-format
--msgid "%d requests sent out"
-+#: ../statistics.c:74
-+#, fuzzy, c-format
-+msgid "%u requests sent out"
- msgstr "%d Anfragen ausgesandt"
- 
- #. ?
--#: ../statistics.c:73
--#, c-format
--msgid "%d outgoing packets dropped"
-+#: ../statistics.c:75
-+#, fuzzy, c-format
-+msgid "%u outgoing packets dropped"
- msgstr "%d ausgehende Pakete weggeworfen"
- 
--#: ../statistics.c:74
--#, c-format
--msgid "%d dropped because of missing route"
-+#: ../statistics.c:76
-+#, fuzzy, c-format
-+msgid "%u dropped because of missing route"
- msgstr "%d weggeworfen wegen fehlender Route"
- 
--#: ../statistics.c:75
--#, c-format
--msgid "%d fragments dropped after timeout"
-+#: ../statistics.c:77
-+#, fuzzy, c-format
-+msgid "%u fragments dropped after timeout"
- msgstr "%d Fragmente nach Timeout weggeworfen"
- 
--#: ../statistics.c:76
--#, c-format
--msgid "%d reassemblies required"
-+#: ../statistics.c:78
-+#, fuzzy, c-format
-+msgid "%u reassemblies required"
- msgstr "%d Wiederzusammenstellungen nötig"
- 
- #. ?
--#: ../statistics.c:77
--#, c-format
--msgid "%d packets reassembled ok"
-+#: ../statistics.c:79
-+#, fuzzy, c-format
-+msgid "%u packets reassembled ok"
- msgstr "%d Fragmente korrekt empfangen"
- 
--#: ../statistics.c:78
--#, c-format
--msgid "%d packet reassembles failed"
-+#: ../statistics.c:80
-+#, fuzzy, c-format
-+msgid "%u packet reassembles failed"
- msgstr "%d fehlgeschlagene Paketdefragmentierungen"
- 
--#: ../statistics.c:79
--#, c-format
--msgid "%d fragments received ok"
-+#: ../statistics.c:81
-+#, fuzzy, c-format
-+msgid "%u fragments received ok"
- msgstr "%d Fragmente korrekt empfangen"
- 
--#: ../statistics.c:80
--#, c-format
--msgid "%d fragments failed"
--msgstr "%d Fragmente Fehlgeschlagen"
-+#: ../statistics.c:82
-+#, fuzzy, c-format
-+msgid "%u fragments failed"
-+msgstr "%d Fragmente fehlgeschlagen"
- 
--#: ../statistics.c:81
--#, c-format
--msgid "%d fragments created"
-+#: ../statistics.c:83
-+#, fuzzy, c-format
-+msgid "%u fragments created"
- msgstr "%d Fragmente erzeugt"
- 
--#: ../statistics.c:86
--#, c-format
--msgid "%d ICMP messages received"
--msgstr "%d ICMP Nachrichten empfangen"
-+#: ../statistics.c:88
-+#, fuzzy, c-format
-+msgid "%u ICMP messages received"
-+msgstr "%d ICMP-Nachrichten empfangen"
- 
--#: ../statistics.c:87
--#, c-format
--msgid "%d input ICMP message failed."
--msgstr "%d eingegangene ICMP Nachrichten fehlgeschlagen"
-+#: ../statistics.c:89
-+#, fuzzy, c-format
-+msgid "%u input ICMP message failed."
-+msgstr "%d eingegangene ICMP-Nachrichten fehlgeschlagen"
- 
--#: ../statistics.c:88 ../statistics.c:101
--#, c-format
--msgid "destination unreachable: %d"
-+#: ../statistics.c:90 ../statistics.c:103
-+#, fuzzy, c-format
-+msgid "destination unreachable: %u"
- msgstr "Ziel unerreichbar: %d"
- 
--#: ../statistics.c:89
--#, c-format
--msgid "timeout in transit: %d"
-+#: ../statistics.c:91
-+#, fuzzy, c-format
-+msgid "timeout in transit: %u"
- msgstr "Timeout beim Transit: %d"
- 
--#: ../statistics.c:90 ../statistics.c:103
--#, c-format
--msgid "wrong parameters: %d"
-+#: ../statistics.c:92 ../statistics.c:105
-+#, fuzzy, c-format
-+msgid "wrong parameters: %u"
- msgstr "Fehlerhafte Parameter: %d"
- 
- #. ?
--#: ../statistics.c:91
--#, c-format
--msgid "source quenchs: %d"
-+#: ../statistics.c:93
-+#, fuzzy, c-format
-+msgid "source quenches: %u"
- msgstr "Source Quenchs: %d"
- 
--#: ../statistics.c:92
--#, c-format
--msgid "redirects: %d"
-+#: ../statistics.c:94
-+#, fuzzy, c-format
-+msgid "redirects: %u"
- msgstr "Umleitungen: %d"
- 
--#: ../statistics.c:93
--#, c-format
--msgid "echo requests: %d"
--msgstr "Echo Requests: %d"
-+#: ../statistics.c:95
-+#, fuzzy, c-format
-+msgid "echo requests: %u"
-+msgstr "Echo Anfragen: %d"
- 
--#: ../statistics.c:94 ../statistics.c:107
--#, c-format
--msgid "echo replies: %d"
-+#: ../statistics.c:96 ../statistics.c:109
-+#, fuzzy, c-format
-+msgid "echo replies: %u"
- msgstr "Echo Antworten: %d"
- 
--#: ../statistics.c:95
--#, c-format
--msgid "timestamp request: %d"
-+#: ../statistics.c:97
-+#, fuzzy, c-format
-+msgid "timestamp request: %u"
- msgstr "Zeitstempelanfragen: %d"
- 
--#: ../statistics.c:96
--#, c-format
--msgid "timestamp reply: %d"
-+#: ../statistics.c:98
-+#, fuzzy, c-format
-+msgid "timestamp reply: %u"
- msgstr "Zeitstempelantworten: %d"
- 
--#: ../statistics.c:97
--#, c-format
--msgid "address mask request: %d"
-+#: ../statistics.c:99
-+#, fuzzy, c-format
-+msgid "address mask request: %u"
- msgstr "Adressmaskenanfragen: %d"
- 
- #. ?
--#: ../statistics.c:98
--msgid "address mask replies"
--msgstr "Adressmaskenantworten"
-+#: ../statistics.c:100 ../statistics.c:113
-+#, fuzzy, c-format
-+msgid "address mask replies: %u"
-+msgstr "Adressmaskenantworten: %d"
- 
- #. ?
--#: ../statistics.c:99
--#, c-format
--msgid "%d ICMP messages sent"
-+#: ../statistics.c:101
-+#, fuzzy, c-format
-+msgid "%u ICMP messages sent"
- msgstr "%d ICMP-Nachrichten geschickt"
- 
--#: ../statistics.c:100
--#, c-format
--msgid "%d ICMP messages failed"
--msgstr "%d ICMP Nachrichten fehlgeschlagen"
--
- #: ../statistics.c:102
--#, c-format
--msgid "time exceeded: %d"
-+#, fuzzy, c-format
-+msgid "%u ICMP messages failed"
-+msgstr "%d ICMP-Nachrichten fehlgeschlagen"
-+
-+#: ../statistics.c:104
-+#, fuzzy, c-format
-+msgid "time exceeded: %u"
- msgstr "Zeitüberschreitung: %d"
- 
- #. ?
--#: ../statistics.c:104
--#, c-format
--msgid "source quench: %d"
-+#: ../statistics.c:106
-+#, fuzzy, c-format
-+msgid "source quench: %u"
- msgstr "Source Quench: %d"
- 
--#: ../statistics.c:105
--#, c-format
--msgid "redirect: %d"
-+#: ../statistics.c:107
-+#, fuzzy, c-format
-+msgid "redirect: %u"
- msgstr "Umleitungen: %d"
- 
--#: ../statistics.c:106
--#, c-format
--msgid "echo request: %d"
-+#: ../statistics.c:108
-+#, fuzzy, c-format
-+msgid "echo request: %u"
- msgstr "Echo Anfragen: %d"
- 
--#: ../statistics.c:108
--#, c-format
--msgid "timestamp requests: %d"
-+#: ../statistics.c:110
-+#, fuzzy, c-format
-+msgid "timestamp requests: %u"
- msgstr "Zeitstempel Anfragen: %d"
- 
--#: ../statistics.c:109
--#, c-format
--msgid "timestamp replies: %d"
-+#: ../statistics.c:111
-+#, fuzzy, c-format
-+msgid "timestamp replies: %u"
- msgstr "Zeitstempel Antworten: %d"
- 
--#: ../statistics.c:110
--#, c-format
--msgid "address mask requests: %d"
-+#: ../statistics.c:112
-+#, fuzzy, c-format
-+msgid "address mask requests: %u"
- msgstr "Adressmaskenanfragen: %d"
- 
--#: ../statistics.c:111
-+#: ../statistics.c:118
- #, c-format
--msgid "address mask replies: %d"
--msgstr "Adressmaskenantworten: %d"
-+msgid "RTO algorithm is %s"
-+msgstr "RTO-Algorithmus ist %s"
-+
-+#: ../statistics.c:122
-+#, fuzzy, c-format
-+msgid "%u active connections openings"
-+msgstr "%d Verbindungen aktiv geöffnet"
-+
-+#: ../statistics.c:123
-+#, fuzzy, c-format
-+msgid "%u passive connection openings"
-+msgstr "%d Verbindungen passiv geöffnet"
-+
-+#: ../statistics.c:124
-+#, fuzzy, c-format
-+msgid "%u failed connection attempts"
-+msgstr "%d fehlerhafte Verbindungsversuche"
-+
-+#: ../statistics.c:125
-+#, fuzzy, c-format
-+msgid "%u connection resets received"
-+msgstr "%d Verbindungsrücksetzungen empfangen"
-+
-+#: ../statistics.c:126
-+#, fuzzy, c-format
-+msgid "%u connections established"
-+msgstr "%d Verbindungen aufgebaut"
-+
-+#: ../statistics.c:127
-+#, fuzzy, c-format
-+msgid "%u segments received"
-+msgstr "%d Segmente empfangen"
-+
-+#: ../statistics.c:128
-+#, fuzzy, c-format
-+msgid "%u segments send out"
-+msgstr "%d Segmente abgeschickt"
-+
-+#: ../statistics.c:129
-+#, fuzzy, c-format
-+msgid "%u segments retransmited"
-+msgstr "%d Segmente erneut geschickt"
-+
-+#: ../statistics.c:130
-+#, fuzzy, c-format
-+msgid "%u bad segments received."
-+msgstr "%d fehlerhafte Segmente empfangen."
-+
-+#: ../statistics.c:131
-+#, fuzzy, c-format
-+msgid "%u resets sent"
-+msgstr "%d Rücksetzungen geschickt"
-+
-+#: ../statistics.c:136
-+#, fuzzy, c-format
-+msgid "%u packets received"
-+msgstr "%d Pakete empfangen"
-+
-+#: ../statistics.c:137
-+#, fuzzy, c-format
-+msgid "%u packets to unknown port received."
-+msgstr "%d Pakete für unbekannte Ports empfangen."
-+
-+#: ../statistics.c:138
-+#, fuzzy, c-format
-+msgid "%u packet receive errors"
-+msgstr "%d Paketempfangsfehler"
-+
-+#: ../statistics.c:139
-+#, fuzzy, c-format
-+msgid "%u packets sent"
-+msgstr "%d Pakete geschickt"
-+
-+#: ../statistics.c:144
-+#, fuzzy, c-format
-+msgid "%u SYN cookies sent"
-+msgstr "%d SYN-Cookies verschickt"
-+
-+#: ../statistics.c:145
-+#, fuzzy, c-format
-+msgid "%u SYN cookies received"
-+msgstr "%d SYN-Cookies empfangen"
- 
--#: ../statistics.c:116
-+#: ../statistics.c:146
-+#, fuzzy, c-format
-+msgid "%u invalid SYN cookies received"
-+msgstr "%d ungültige SYN-Cookies empfangen"
-+
-+#: ../statistics.c:148
-+#, fuzzy, c-format
-+msgid "%u resets received for embryonic SYN_RECV sockets"
-+msgstr "%d Rücksetzungen für embrionische SYN_RECV-Sockets"
-+
-+#: ../statistics.c:150
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue because of socket buffer overrun"
-+msgstr "%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange weggeworfen"
-+
-+#. obsolete: 2.2.0 doesn't do that anymore
-+#: ../statistics.c:153
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue"
-+msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-+
-+#: ../statistics.c:154
-+#, fuzzy, c-format
-+msgid ""
-+"%u packets dropped from out-of-order queue because of socket buffer overrun"
-+msgstr "%d Pakete aus der ungeordneten Warteschlange wegen Pufferüberlauf weggeworfen"
-+
-+#: ../statistics.c:156
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because they were out-of-window"
-+msgstr "%d ICMP-Pakete weggeworfen die außerhalb des Fensters waren"
-+
-+#: ../statistics.c:158
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because socket was locked"
-+msgstr "%d ICMP-Pakete verworfen weil Socket gesperrt war"
-+
-+#: ../statistics.c:160
- #, c-format
--msgid "RTO algorithm is %s"
--msgstr "RTO Algorithmus is %s"
-+msgid "%u TCP sockets finished time wait in fast timer"
-+msgstr ""
- 
--#: ../statistics.c:120
-+#: ../statistics.c:161
- #, c-format
--msgid "%d active connections openings"
--msgstr "%d Verbindungen aktiv geöffnet"
-+msgid "%u time wait sockets recycled by time stamp"
-+msgstr ""
- 
--#: ../statistics.c:121
-+#: ../statistics.c:162
- #, c-format
--msgid "%d passive connection openings"
--msgstr "%d Verbindungen passiv geöffnet"
-+msgid "%u TCP sockets finished time wait in slow timer"
-+msgstr ""
- 
--#: ../statistics.c:122
-+#: ../statistics.c:163
- #, c-format
--msgid "%d failed connection attempts"
--msgstr "%d fehlerhafte Verbindungsversuche"
-+msgid "%u passive connections rejected because of time stamp"
-+msgstr ""
- 
--#: ../statistics.c:123
-+#: ../statistics.c:165
- #, c-format
--msgid "%d connection resets received"
--msgstr "%d Verbindungsrücksetzungen empfangen"
-+msgid "%u active connections rejected because of time stamp"
-+msgstr ""
- 
--#: ../statistics.c:124
-+#: ../statistics.c:167
- #, c-format
--msgid "%d connections established"
--msgstr "%d Verbindungen aufgebaut"
-+msgid "%u packets rejects in established connections because of timestamp"
-+msgstr ""
- 
--#: ../statistics.c:125
-+#: ../statistics.c:169
-+#, fuzzy, c-format
-+msgid "%u delayed acks sent"
-+msgstr "%d Pakete geschickt"
-+
-+#: ../statistics.c:170
- #, c-format
--msgid "%d segments received"
--msgstr "%d Segmente empfangen"
-+msgid "%u delayed acks further delayed because of locked socket"
-+msgstr ""
- 
--#: ../statistics.c:126
-+#: ../statistics.c:172
- #, c-format
--msgid "%d segments send out"
--msgstr "%d Segmente abgeschickt"
-+msgid "Quick ack mode was activated %u times"
-+msgstr ""
- 
--#: ../statistics.c:127
-+#: ../statistics.c:173
- #, c-format
--msgid "%d segments retransmited"
--msgstr "%d Segmente erneut geschickt"
-+msgid "%u times the listen queue of a socket overflowed"
-+msgstr ""
- 
--#: ../statistics.c:128
-+#: ../statistics.c:175
- #, c-format
--msgid "%d bad segments received."
--msgstr "%d fehlerhafte Segmente empfangen."
-+msgid "%u SYNs to LISTEN sockets ignored"
-+msgstr ""
- 
--#: ../statistics.c:129
-+#: ../statistics.c:176
- #, c-format
--msgid "%d resets sent"
--msgstr "%d Rücksetzungen geschickt"
-+msgid "%u packets directly queued to recvmsg prequeue."
-+msgstr ""
- 
--#: ../statistics.c:134
-+#: ../statistics.c:178
- #, c-format
--msgid "%d packets received"
-+msgid "%u of bytes directly received from backlog"
-+msgstr ""
-+
-+#: ../statistics.c:180
-+#, c-format
-+msgid "%u of bytes directly received from prequeue"
-+msgstr ""
-+
-+#: ../statistics.c:182
-+#, fuzzy, c-format
-+msgid "%u packets dropped from prequeue"
-+msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-+
-+#: ../statistics.c:183
-+#, fuzzy, c-format
-+msgid "%u packet headers predicted"
- msgstr "%d Pakete empfangen"
- 
--#: ../statistics.c:135
-+#: ../statistics.c:184
- #, c-format
--msgid "%d packets to unknown port received."
-+msgid "%u packets header predicted and directly queued to user"
-+msgstr ""
-+
-+#: ../statistics.c:186
-+#, c-format
-+msgid "Ran %u times out of system memory during packet sending"
-+msgstr ""
-+
-+#: ../statistics.c:188
-+#, fuzzy, c-format
-+msgid "%u acknowledgments not containing data received"
- msgstr "%d Pakete für unbekannte Ports empfangen."
- 
--#: ../statistics.c:136
-+#: ../statistics.c:189
- #, c-format
--msgid "%d packet receive errors"
--msgstr "%d Paketempfangsfehler"
-+msgid "%u predicted acknowledgments"
-+msgstr ""
- 
--#: ../statistics.c:137
-+#: ../statistics.c:190
- #, c-format
--msgid "%d packets sent"
--msgstr "%d Pakete geschickt"
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
- 
--#: ../statistics.c:142
-+#: ../statistics.c:191
- #, c-format
--msgid "%d SYN cookies sent"
--msgstr "%d SYN-Cookies verschickt"
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
- 
--#: ../statistics.c:143
-+#: ../statistics.c:192
-+#, fuzzy, c-format
-+msgid "%u bad SACKs received"
-+msgstr "%d fehlerhafte Segmente empfangen."
-+
-+#: ../statistics.c:193
- #, c-format
--msgid "%d SYN cookies received"
--msgstr "%d SYN-Cookies empfangen"
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
- 
--#: ../statistics.c:144
-+#: ../statistics.c:194
- #, c-format
--msgid "%d invalid SYN cookies received"
--msgstr "%d ungültige SYN-Cookies empfangen"
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
- 
--#: ../statistics.c:146
-+#: ../statistics.c:195
- #, c-format
--msgid "%d resets received for embryonic SYN_RECV sockets"
--msgstr "%d Rücksetzungen fuer embrionische SYN_RECV Sockets"
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
- 
--#: ../statistics.c:148
-+#: ../statistics.c:196
- #, c-format
--msgid "%d packets pruned from receive queue because of socket buffer overrun"
-+msgid "Detected reordering %u times using reno fast retransmit"
- msgstr ""
--"%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange "
--"weggeworfen"
- 
--#. obsolete: 2.2.0 doesn't do that anymore
--#: ../statistics.c:151
-+#: ../statistics.c:197
- #, c-format
--msgid "%d packets pruned from out-of-order queue"
--msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-+msgid "%u congestion windows fully recovered"
-+msgstr ""
- 
--#: ../statistics.c:152
-+#: ../statistics.c:198
- #, c-format
--msgid ""
--"%d packets dropped from out-of-order queue because of socket buffer overrun"
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
- msgstr ""
--"%d Pakete aus der ungeordneten Warteschlange wegen Pufferüberlauf weggeworfen"
- 
--#: ../statistics.c:154
-+#: ../statistics.c:199
- #, c-format
--msgid "%d ICMP packets dropped because they were out-of-window"
--msgstr "%d ICMP Pakete weggeworfen die auserhalb des Fensters waren"
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
- 
--#: ../statistics.c:156
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, fuzzy, c-format
-+msgid "%u retransmits lost"
-+msgstr "%d Rücksetzungen geschickt"
-+
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, fuzzy, c-format
-+msgid "%u fast retransmits"
-+msgstr "%d Segmente erneut geschickt"
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, fuzzy, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "%d Segmente erneut geschickt"
-+
-+#: ../statistics.c:210
-+#, fuzzy, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "%d fehlgeschlagene Paketdefragmentierungen"
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, fuzzy, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr "%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange weggeworfen"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, fuzzy, c-format
-+msgid "%u DSACKs received"
-+msgstr "%d Pakete empfangen"
-+
-+#: ../statistics.c:216
-+#, fuzzy, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "%d Pakete insgesamt empfangen"
-+
-+#: ../statistics.c:217
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "%d Verbindungsrücksetzungen empfangen"
-+
-+#: ../statistics.c:218
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "%d Verbindungsrücksetzungen empfangen"
-+
-+#: ../statistics.c:219
-+#, fuzzy, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "%d Verbindungsrücksetzungen empfangen"
-+
-+#: ../statistics.c:220
- #, c-format
--msgid "%d ICMP packets dropped because socket was locked"
--msgstr "%d ICMP Pakete verworfen weil Socket gesperrt war"
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, fuzzy, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "%d Verbindungsrücksetzungen empfangen"
- 
- #: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr "aktiviert"
- 
--#: ../statistics.c:222
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr "deaktiviert"
- 
--#: ../statistics.c:272
--#, c-format
--msgid "unknown title %s\n"
--msgstr "Unbekannter Titel %s\n"
--
--#: ../statistics.c:298
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr "Fehler beim Parsen von /proc/net/snmp"
- 
--#: ../statistics.c:311
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr "Kann /proc/net/snmp nicht öffnen"
- 
- #: ../lib/activate.c:69
- #, c-format
- msgid "Hardware type `%s' not supported.\n"
--msgstr "Hardwaretyp ,,%s'' nicht unterstützt.\n"
-+msgstr "Hardwaretyp »%s« nicht unterstützt.\n"
- 
- #: ../lib/activate.c:73
- #, c-format
- msgid "Cannot change line discipline to `%s'.\n"
--msgstr "Kann line discipline nicht auf ``%s'' setzen.\n"
-+msgstr "Kann line discipline nicht auf »%s« setzen.\n"
- 
--#: ../lib/af.c:145 ../lib/hw.c:148
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr "UNSPEC"
- 
--#: ../lib/af.c:147
-+#: ../lib/af.c:155
- msgid "UNIX Domain"
--msgstr "UNIX Domain"
-+msgstr "UNIX-Domain"
- 
--#: ../lib/af.c:150
-+#: ../lib/af.c:158
- msgid "DARPA Internet"
--msgstr "DARPA Internet"
-+msgstr "DARPA-Internet"
- 
--#: ../lib/af.c:153
-+#: ../lib/af.c:161
- msgid "IPv6"
- msgstr "IPv6"
- 
--#: ../lib/af.c:156 ../lib/hw.c:169
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr "AMPR AX.25"
- 
--#: ../lib/af.c:159 ../lib/hw.c:175
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr "AMPR NET/ROM"
- 
--#: ../lib/af.c:162
-+#: ../lib/af.c:170
- msgid "Novell IPX"
- msgstr ""
- 
--#: ../lib/af.c:165
-+#: ../lib/af.c:173
- msgid "Appletalk DDP"
- msgstr "Appletalk DDP"
- 
--#: ../lib/af.c:168 ../lib/hw.c:207
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr "Econet"
- 
--#: ../lib/af.c:171 ../lib/hw.c:172
-+#: ../lib/af.c:179
-+msgid "CCITT X.25"
-+msgstr ""
-+
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr "AMPR ROSE"
- 
--#: ../lib/af.c:174 ../lib/hw.c:160
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr "Ash"
- 
--#: ../lib/af.c:232
-+#: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr "Bitte nur eine Adressfamilie angeben.\n"
- 
--#: ../lib/af.c:293
-+#: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr "Zu viele Adressfamilien angegeben.\n"
- 
--#: ../lib/af.c:304
-+#: ../lib/af.c:315
- #, c-format
- msgid "Unknown address family `%s'.\n"
--msgstr "Unbekannte Adressfamilie `%s'.\n"
--
--#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
--#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
--#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
--#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
--msgid "[NONE SET]"
--msgstr "[NICHT GESETZT]"
-+msgstr "Unbekannte Adressfamilie »%s«.\n"
- 
--#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-+#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
- #, c-format
- msgid "in_arcnet(%s): invalid arcnet address!\n"
- msgstr "in_arcnet(%s): Ungültige ARCnet-Adresse!\n"
- 
--#: ../lib/arcnet.c:108
-+#: ../lib/arcnet.c:97
- #, c-format
- msgid "in_arcnet(%s): trailing : ignored!\n"
- msgstr "in_arcnet(%s): angehängt : ignoriert!\n"
- 
--#: ../lib/arcnet.c:120
-+#: ../lib/arcnet.c:109
- #, c-format
- msgid "in_arcnet(%s): trailing junk!\n"
- msgstr "in_arcnet(%s): Nachfolgender Müll!\n"
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
--msgstr "Fehlerhafte Ash Adresse"
-+msgstr "Fehlerhafte Ash-Adresse"
-+
-+#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-+#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-+#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-+msgid "[NONE SET]"
-+msgstr "[NICHT GESETZT]"
- 
- #: ../lib/ax25.c:97 ../lib/netrom.c:100
- msgid "Invalid callsign"
-@@ -1898,22 +2168,21 @@
- msgstr "Rufzeichen zu lang"
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr "AX.25 ist auf diesem System nicht konfiguriert.\n"
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr "Kernel AX.25 Routentabelle\n"
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr "Ziel         SStelle  Benutzer\n"
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr "DDP-Routentabelle wird noch nicht unterstützt.\n"
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1929,153 +2198,168 @@
- msgid "in_ether(%s): trailing junk!\n"
- msgstr "in_ether(%s): Nachfolgender Müll!\n"
- 
--#: ../lib/fddi.c:95 ../lib/fddi.c:110
-+#: ../lib/fddi.c:84 ../lib/fddi.c:99
- #, c-format
- msgid "in_fddi(%s): invalid fddi address!\n"
- msgstr "in_fddi(%s): Ungültige FDDI-Adresse!\n"
- 
--#: ../lib/fddi.c:122
-+#: ../lib/fddi.c:111
- #, c-format
- msgid "in_fddi(%s): trailing : ignored!\n"
- msgstr "in_fddi(%s): nachfolgend : ignoriert!\n"
- 
--#: ../lib/fddi.c:134
-+#: ../lib/fddi.c:123
- #, c-format
- msgid "in_fddi(%s): trailing junk!\n"
- msgstr "in_fddi(%s): Nachfolgender Müll!\n"
- 
--#: ../lib/getroute.c:97 ../lib/setroute.c:76
-+#: ../lib/getroute.c:101 ../lib/setroute.c:80
- #, c-format
- msgid "Address family `%s' not supported.\n"
- msgstr "Adressfamilie `%s' wird nicht unterstützt.\n"
- 
--#: ../lib/getroute.c:103 ../lib/setroute.c:80
-+#: ../lib/getroute.c:107 ../lib/setroute.c:84
- #, c-format
- msgid "No routing for address family `%s'.\n"
- msgstr "Kein Routen für Adressfamilie `%s'.\n"
- 
--#: ../lib/hippi.c:96 ../lib/hippi.c:111
-+#: ../lib/hippi.c:84 ../lib/hippi.c:99
- #, c-format
- msgid "in_hippi(%s): invalid hippi address!\n"
- msgstr "in_hippi(%s): Ungültige HIPPI-Adresse!\n"
- 
--#: ../lib/hippi.c:123
-+#: ../lib/hippi.c:111
- #, c-format
- msgid "in_hippi(%s): trailing : ignored!\n"
- msgstr "in_hippi(%s): nachfolgend : ignoriert!\n"
- 
--#: ../lib/hippi.c:134
-+#: ../lib/hippi.c:122
- #, c-format
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr "in_hippi(%s): Nachfolgender Müll!\n"
- 
--#: ../lib/hw.c:147
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr "Lokale Schleife"
- 
--#: ../lib/hw.c:150
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr "Serielle IP"
- 
--#: ../lib/hw.c:151
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr "Serielle VJ-IP"
- 
--#: ../lib/hw.c:152
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr "6-bit Serielle IP"
- 
--#: ../lib/hw.c:153
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr "VJ 6-bit Serielle IP"
- 
--#: ../lib/hw.c:154
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr "Adaptive Serielle IP"
- 
--#: ../lib/hw.c:157
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr "Ethernet"
- 
--#: ../lib/hw.c:163
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr "Fiber Distributed Data Interface"
- 
--#: ../lib/hw.c:166
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr "HIPPI"
- 
--#: ../lib/hw.c:178
-+#: ../lib/hw.c:191
-+msgid "generic X.25"
-+msgstr ""
-+
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr "IPIP Tunnel"
- 
--#: ../lib/hw.c:181
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
--msgstr "Punkt-zu-Punkt Verbindung"
-+msgstr "Punkt-zu-Punkt-Verbindung"
- 
--#: ../lib/hw.c:184
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr "(Cisco)-HDLC"
- 
--#: ../lib/hw.c:185
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:188
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr "ARCnet"
- 
--#: ../lib/hw.c:191
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr "Frame Relay DLCI"
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr "Frame Relay Access Device"
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr "IPv6-nach-IPv4"
- 
--#: ../lib/hw.c:198
--#, fuzzy
-+#: ../lib/hw.c:214
- msgid "IrLAP"
--msgstr "LAPB"
-+msgstr "IrLAP"
- 
--#: ../lib/hw.c:201
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr ""
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:219
- msgid "16/4 Mbps Token Ring (New)"
- msgstr ""
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
- msgstr "rresolve: nicht unterstützte Adressfamilie %d !\n"
- 
--#: ../lib/inet6_gr.c:79
-+#: ../lib/inet6.c:131
-+#, fuzzy
-+msgid "[UNKNOWN]"
-+msgstr "UNBEKANNT"
-+
-+#: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr "INET6 (IPv6) ist auf diesem System nicht konfiguriert.\n"
- 
--#: ../lib/inet6_gr.c:82
-+#: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
--msgstr "Kernel IPv6 Routentabelle\n"
-+msgstr "Kernel-IPv6-Routentabelle\n"
- 
--#: ../lib/inet6_gr.c:84
-+#: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
--msgstr ""
--"Ziel                                        Nächster Hop                     "
--"            Flags Metric Ref    Benutzer Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
-+msgstr "Ziel                                        Nächster Hop                                 Flags Metric Ref    Benutzer Iface\n"
- 
--#: ../lib/inet6_gr.c:158
-+#: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr "Kernel IPv6 Nachbarcache\n"
- 
--#: ../lib/inet6_gr.c:161
-+#: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
-@@ -2083,39 +2367,45 @@
- "Nachbar                                     HW-Adresse        Iface    Flags "
- "Ref Zustand\n"
- 
--#: ../lib/inet6_gr.c:165
-+#: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
--msgstr ""
--"Nachbar                                     HW-Adresse        Iface    Flags "
--"Ref Zustand          Stale(sec) Löschen(sec)\n"
-+msgstr "Nachbar                                     HW-Adresse        Iface    Flags Ref Zustand          Stale(sec) Löschen(sec)\n"
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr "Benutzung: inet6_route [-vF] del Ziel\n"
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr "       inet6_route [-vF] add Ziel [gw Gateway] [metric M] [[dev] If]\n"
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr "       inet6_route [-FC] flush      NICHT unterstützt\n"
- 
--#: ../lib/inet6_sr.c:182
-+#: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
--msgstr ",,Flush'' für IPv6 Routentabelle nicht unterstützt\n"
-+msgstr "»Flush« für IPv6-Routentabelle nicht unterstützt\n"
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr "INET (IPv4) ist auf diesem System nicht konfiguriert.\n"
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
--msgstr "Kernel IP Routentabelle\n"
-+msgstr "Kernel-IP-Routentabelle\n"
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2124,6 +2414,7 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2132,6 +2423,7 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
-@@ -2140,10 +2432,12 @@
- "Iface    MSS   Fenster irtt\n"
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
--msgstr "Kernel IP Routencache\n"
-+msgstr "Kernel-IP-Routencache\n"
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2152,6 +2446,7 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2160,6 +2455,7 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
-@@ -2168,6 +2464,7 @@
- "Iface    MSS   Fenster irtt   HH  Arp\n"
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-@@ -2175,37 +2472,39 @@
- "Quelle          Ziel            Gateway         Flags Metrik Ref    Ben "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
--msgstr ""
--"Benutzung: inet_route [-vF] del {-host|-net} Ziel[/prefix] [gw Gw] [metric "
--"M] [[dev] If]\n"
-+msgstr "Benutzung: inet_route [-vF] del {-host|-net} Ziel[/Präfix] [gw Gw] [metric M] [[dev] If]\n"
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
--msgstr ""
--"       inet_route [-vF] add {-host|-net} Ziel[/Prefix] [gw Gw] [metric M]\n"
-+msgstr "       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [gw Gw] [metric M]\n"
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
--msgstr ""
--"       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [metric M] reject\n"
-+msgstr "       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [metric M] reject\n"
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr "       inet_route [-FC] flush      NICHT unterstützt\n"
- 
-@@ -2215,15 +2514,17 @@
- msgstr "route: %s: Netzadresse als Gateway ungültig!\n"
- 
- #: ../lib/inet_sr.c:174
--#, fuzzy
-+#, fuzzy, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr "route: Ungültige MSS.\n"
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr "route: Ungültige Fenstergröße.\n"
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr "route: Ungültige Start-RTT.\n"
- 
-@@ -2238,126 +2539,408 @@
- msgstr "Route: Fehlerhafte Netzmaske %s\n"
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr "route: Netzmaske passt nicht zur Routenadresse\n"
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
--msgstr ",,Flush'' der Inet-Routentabelle nicht unterstützt\n"
-+msgstr "»Flush« der Inet-Routentabelle nicht unterstützt\n"
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
--msgstr "Änderung des ,,Inet'' Routencaches nicht unterstützt\n"
-+msgstr "Änderung des »Inet« Routencaches nicht unterstützt\n"
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr "IPX ist auf diesem System nicht konfiguriert.\n"
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
--msgstr "Kernel IPX Routentabelle\n"
-+msgstr "Kernel-IPX-Routentabelle\n"
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
--msgstr "Ziel                      Router Netz               Router Knoten\n"
-+msgstr "Ziel                      Router-Netz               Router-Knoten\n"
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
--msgstr "IPX: dies muß noch geschrieben werden\n"
-+msgstr "IPX: dies muss noch geschrieben werden\n"
- 
--#: ../lib/masq_info.c:197
-+#: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr "IP-Maskierungseinträge\n"
- 
--#: ../lib/masq_info.c:200
-+#: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr "Prot   expire Quelle               Ziel                 Ports\n"
- 
--#: ../lib/masq_info.c:203
-+#: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
--"Prot   Ablauf    Anf-Seq Delta Prevd Quelle               Ziel               "
--"  Ports\n"
-+"Prot   Ablauf    Anf-Seq Delta Prevd Quelle               "
-+"Ziel                 Ports\n"
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr "NET/ROM ist auf diesem System nicht verfügbar.\n"
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
--msgstr "Kernel NET/ROM Routentabelle\n"
-+msgstr "Kernel-NET/ROM-Routentabelle\n"
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr "Ziel         Mnemonic  Qualität  Nachbar  Iface\n"
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
--msgstr "NET/ROM Benutzung\n"
-+msgstr "NET/ROM-Benutzung\n"
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
--msgstr "NET/ROM: Dies muß noch geschrieben werden\n"
-+msgstr "NET/ROM: Dies muss noch geschrieben werden\n"
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr "Mit diesem Programm kann PPP nicht gestartet werden.\n"
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
--msgstr "Bitte benutzen sie pppd.\n"
-+msgstr "Bitte benutzen Sie pppd.\n"
- 
- #: ../lib/rose.c:87
- msgid "Node address must be ten digits"
--msgstr "Knotenadresse muß zehn Ziffern haben"
-+msgstr "Knotenadresse muss zehn Ziffern haben"
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr "ROSE ist auf diesem System nicht verfügbar.\n"
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
--msgstr "ROSE Kernel Routentabelle\n"
-+msgstr "ROSE-Kernel-Routentabelle\n"
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr "in_tr(%s): ungültige Tokenringadresse!\n"
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr "in_tr(%s): nachfolgend : ignoriert!\n"
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr "in_tr(%s): nachfolgender Müll!\n"
- 
--#: ../lib/interface.c:124
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
--msgstr "Warnung: Keine INET Sockets verfügbar: %s\n"
-+msgstr "Warnung: Keine INET-Sockets verfügbar: %s\n"
- 
--#: ../lib/interface.c:270
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr ""
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:504
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr "Gerät nicht gefunden"
- 
--#: ../lib/interface.c:508
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
- msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
- 
--#: ../lib/sockets.c:59
-+#: ../lib/interface.c:608
-+msgid "     - no statistics available -"
-+msgstr "     - keine Statistiken verfügbar -"
-+
-+#: ../lib/interface.c:612
-+#, c-format
-+msgid "[NO FLAGS]"
-+msgstr "[KEINE FLAGS]"
-+
-+#: ../lib/interface.c:688
-+#, c-format
-+msgid "%-9.9s Link encap:%s  "
-+msgstr "%-9.9s Protokoll:%s  "
-+
-+#: ../lib/interface.c:693
-+#, c-format
-+msgid "HWaddr %s  "
-+msgstr "Hardware Adresse %s  "
-+
-+#: ../lib/interface.c:696
-+#, c-format
-+msgid "Media:%s"
-+msgstr "Medium:%s"
-+
-+#: ../lib/interface.c:698
-+#, c-format
-+msgid "(auto)"
-+msgstr "(auto)"
-+
-+#: ../lib/interface.c:705
-+#, c-format
-+msgid "          %s addr:%s "
-+msgstr "          %s Adresse:%s "
-+
-+#: ../lib/interface.c:708
-+#, c-format
-+msgid " P-t-P:%s "
-+msgstr " P-z-P:%s "
-+
-+#: ../lib/interface.c:711
-+#, c-format
-+msgid " Bcast:%s "
-+msgstr " Bcast:%s "
-+
-+#: ../lib/interface.c:713
-+#, c-format
-+msgid " Mask:%s\n"
-+msgstr " Maske:%s\n"
-+
-+#: ../lib/interface.c:730
-+#, c-format
-+msgid "          inet6 addr: %s/%d"
-+msgstr "          inet6-Adresse: %s/%d"
-+
-+#: ../lib/interface.c:732
-+#, c-format
-+msgid " Scope:"
-+msgstr " Gültigkeitsbereich:"
-+
-+#: ../lib/interface.c:735
-+#, c-format
-+msgid "Global"
-+msgstr "Global"
-+
-+#: ../lib/interface.c:738
-+#, c-format
-+msgid "Link"
-+msgstr "Verbindung"
-+
-+#: ../lib/interface.c:741
-+#, c-format
-+msgid "Site"
-+msgstr "Standort"
-+
-+#: ../lib/interface.c:744
-+#, c-format
-+msgid "Compat"
-+msgstr "Kompatibilität"
-+
-+#: ../lib/interface.c:747
-+#, c-format
-+msgid "Host"
-+msgstr "Maschine"
-+
-+#: ../lib/interface.c:750
-+#, c-format
-+msgid "Unknown"
-+msgstr "Unbekannt"
-+
-+#: ../lib/interface.c:765
-+#, c-format
-+msgid "          IPX/Ethernet II addr:%s\n"
-+msgstr "          IPX/Ethernet II Adresse:%s\n"
-+
-+#: ../lib/interface.c:768
-+#, c-format
-+msgid "          IPX/Ethernet SNAP addr:%s\n"
-+msgstr "          IPX/Ethernet SNAP Adresse:%s\n"
-+
-+#: ../lib/interface.c:771
-+#, c-format
-+msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+msgstr "          IPX/Ethernet 802.2 Adresse:%s\n"
-+
-+#: ../lib/interface.c:774
-+#, c-format
-+msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+msgstr "          IPX/Ethernet 802.3 Adresse:%s\n"
-+
-+#: ../lib/interface.c:784
-+#, c-format
-+msgid "          EtherTalk Phase 2 addr:%s\n"
-+msgstr "          EtherTalk Phase 2 Adresse:%s\n"
-+
-+#: ../lib/interface.c:793
-+#, c-format
-+msgid "          econet addr:%s\n"
-+msgstr "          econet Adresse:%s\n"
-+
-+#: ../lib/interface.c:800
-+#, c-format
-+msgid "[NO FLAGS] "
-+msgstr "[KEINE FLAGS] "
-+
-+#: ../lib/interface.c:802
-+#, c-format
-+msgid "UP "
-+msgstr "UP "
-+
-+#: ../lib/interface.c:804
-+#, c-format
-+msgid "BROADCAST "
-+msgstr "BROADCAST "
-+
-+#: ../lib/interface.c:806
-+#, c-format
-+msgid "DEBUG "
-+msgstr "DEBUG "
-+
-+#: ../lib/interface.c:808
-+#, c-format
-+msgid "LOOPBACK "
-+msgstr "LOOPBACK "
-+
-+#: ../lib/interface.c:810
-+#, c-format
-+msgid "POINTOPOINT "
-+msgstr "PUNKTZUPUNKT "
-+
-+#: ../lib/interface.c:812
-+#, c-format
-+msgid "NOTRAILERS "
-+msgstr "NOTRAILERS "
-+
-+#: ../lib/interface.c:814
-+#, c-format
-+msgid "RUNNING "
-+msgstr "RUNNING "
-+
-+#: ../lib/interface.c:816
-+#, c-format
-+msgid "NOARP "
-+msgstr "NOARP "
-+
-+#: ../lib/interface.c:818
-+#, c-format
-+msgid "PROMISC "
-+msgstr "PROMISC "
-+
-+#: ../lib/interface.c:820
-+#, c-format
-+msgid "ALLMULTI "
-+msgstr "ALLMULTI "
-+
-+#: ../lib/interface.c:822
-+#, c-format
-+msgid "SLAVE "
-+msgstr "SLAVE "
-+
-+#: ../lib/interface.c:824
-+#, c-format
-+msgid "MASTER "
-+msgstr "MASTER "
-+
-+#: ../lib/interface.c:826
-+#, c-format
-+msgid "MULTICAST "
-+msgstr "MULTICAST "
-+
-+#: ../lib/interface.c:829
-+#, c-format
-+msgid "DYNAMIC "
-+msgstr "DYNAMIC "
-+
-+#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+#: ../lib/interface.c:832
-+#, c-format
-+msgid " MTU:%d  Metric:%d"
-+msgstr " MTU:%d  Metrik:%d"
-+
-+#: ../lib/interface.c:836
-+#, c-format
-+msgid "  Outfill:%d  Keepalive:%d"
-+msgstr "  Outfill:%d  Keepalive:%d"
-+
-+#: ../lib/interface.c:850
-+#, fuzzy, c-format
-+msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgstr "Empfangene Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Rahmen:%lu\n"
-+
-+#: ../lib/interface.c:855
-+#, c-format
-+msgid "             compressed:%lu\n"
-+msgstr "             komprimiert:%lu\n"
-+
-+#: ../lib/interface.c:895
-+#, fuzzy, c-format
-+msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgstr "Verschickte Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Träger:%lu\n"
-+
-+#: ../lib/interface.c:899
-+#, c-format
-+msgid "          collisions:%lu "
-+msgstr "          Kollisionen:%lu "
-+
-+#: ../lib/interface.c:901
-+#, c-format
-+msgid "compressed:%lu "
-+msgstr "Komprimiert:%lu "
-+
-+#: ../lib/interface.c:903
-+#, c-format
-+msgid "txqueuelen:%d "
-+msgstr "Sendewarteschlangenlänge:%d "
-+
-+#: ../lib/interface.c:905
-+#, c-format
-+msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+msgstr ""
-+
-+#: ../lib/interface.c:916
-+#, c-format
-+msgid "Interrupt:%d "
-+msgstr "Interrupt:%d "
-+
-+#. Only print devices using it for
-+#. I/O maps
-+#: ../lib/interface.c:919
-+#, c-format
-+msgid "Base address:0x%x "
-+msgstr "Basisadresse:0x%x "
-+
-+#: ../lib/interface.c:921
-+#, c-format
-+msgid "Memory:%lx-%lx "
-+msgstr "Speicher:%lx-%lx "
-+
-+#: ../lib/interface.c:924
-+#, c-format
-+msgid "DMA chan:%x "
-+msgstr "DMA Kanal:%x "
-+
-+#: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr "Keine benutzbaren Adressfamilien gefunden.\n"
- 
-@@ -2369,41 +2952,44 @@
- #: ../lib/util-ank.c:238
- #, c-format
- msgid "ip: %s is invalid inet prefix\n"
--msgstr "ip: %s ist ein ungültiges INET-Prefix\n"
-+msgstr "ip: %s ist ein ungültiges INET-Präfix\n"
- 
- #: ../lib/util-ank.c:248
- #, c-format
- msgid "ip: %s is invalid IPv4 address\n"
--msgstr "ip: %s ist eine ungültige IPv4 Adresse\n"
-+msgstr "ip: %s ist eine ungültige IPv4-Adresse\n"
- 
- #: ../lib/util-ank.c:256
- #, c-format
- msgid "ip: argument is wrong: %s\n"
- msgstr "ip: Fehlerhaftes Argument: %s\n"
- 
--#: ../ipmaddr.c:56
-+#: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr "Benutzung: ipmaddr [ add | del ] MULTIADR dev NAME\n"
- 
--#: ../ipmaddr.c:57
-+#: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr "       ipmaddr show [ dev NAME ] [ ipv4 | ipv6 | link | all ]\n"
- 
--#: ../ipmaddr.c:58
-+#: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr ""
- 
--#: ../ipmaddr.c:258
-+#: ../ipmaddr.c:263
- #, c-format
- msgid "family %d "
- msgstr "familie %d "
- 
--#: ../ipmaddr.c:267
-+#: ../ipmaddr.c:272
- #, c-format
- msgid " users %d"
- msgstr " Benutzer %d"
- 
--#: ../ipmaddr.c:353
-+#: ../ipmaddr.c:358
- msgid "Cannot create socket"
- msgstr "Kann Socket nicht öffnen"
- 
-@@ -2418,13 +3004,14 @@
- msgstr "slattach: tty_lock: (%s): %s\n"
- 
- #: ../slattach.c:192
-+#, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr "slattach: Kann PID-Datei nicht schreiben\n"
- 
- #: ../slattach.c:202
- #, c-format
- msgid "slattach: tty_lock: UUCP user %s unknown!\n"
--msgstr "slattach: tty_lock: UUCP Benutzer %s unbekannt!\n"
-+msgstr "slattach: tty_lock: UUCP-Benutzer %s unbekannt!\n"
- 
- #: ../slattach.c:430
- #, c-format
-@@ -2436,39 +3023,71 @@
- msgid "slattach: tty_hangup(RAISE): %s\n"
- msgstr "slattach: tty_hangup(RAISE): %s\n"
- 
--#: ../slattach.c:486
-+#: ../slattach.c:468
-+#, fuzzy, c-format
-+msgid "slattach: tty name too long\n"
-+msgstr "%s: name zu lang\n"
-+
-+#: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr "slattach: tty_open: kann aktuellen Zustand nicht auslesen!\n"
- 
--#: ../slattach.c:493
-+#: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
- msgstr ""
- "slattach: tty_open: Kann augenblicklichen Leitungszustand nicht auslesen!\n"
- 
--#: ../slattach.c:501
-+#: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr "slattach: tty_open: Kann RAW-Modus nicht setzen!\n"
- 
--#: ../slattach.c:508
-+#: ../slattach.c:520
- #, c-format
- msgid "slattach: tty_open: cannot set %s bps!\n"
- msgstr "slattach: tty_open: Kann %s bps nicht setzen!\n"
- 
--#: ../slattach.c:518
-+#: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr "slattach: tty_open: Kann 8N1-Modus nicht setzen!\n"
- 
--#: ../slattach.c:686
-+#: ../slattach.c:672
-+#, c-format
-+msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+msgstr ""
-+
-+#: ../slattach.c:704
- #, c-format
- msgid "%s started"
- msgstr "%s gestartet"
- 
--#: ../slattach.c:687
-+#: ../slattach.c:705
- #, c-format
- msgid " on %s"
- msgstr " auf %s"
- 
--#: ../slattach.c:688
-+#: ../slattach.c:706
- #, c-format
- msgid " interface %s\n"
- msgstr " Schnittstelle: %s\n"
-+
-+msgid ""
-+"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+"<-''-\n"
-+msgstr ""
-+"  arp [-v]   [<HW>] [-i <if>] -s  <Hostname> <hwaddr> [netmask <nm>] pub\n"
-+
-+msgid "%s: unknown interface: %s\n"
-+msgstr "%s: unbekannte Schnittstelle: %s\n"
-+
-+msgid "address mask replies"
-+msgstr "Adressmaskenantworten"
-+
-+msgid "unknown title %s\n"
-+msgstr "Unbekannter Titel %s\n"
-+
-+msgid "Routing table for `ddp' not yet supported.\n"
-+msgstr "DDP-Routentabelle wird noch nicht unterstützt.\n"
---- net-tools-1.60.orig/po/fr.po
-+++ net-tools-1.60/po/fr.po
-@@ -4,7 +4,8 @@
- msgid ""
- msgstr ""
- "Project-Id-Version: net-tools 1.51\n"
--"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
- "PO-Revision-Date: 1998-03-01 00:02+0100\n"
- "Last-Translator: J.M.Vansteene <vanstee@worldnet.fr>\n"
- "Language-Team:\n"
-@@ -12,273 +13,277 @@
- "Content-Type: text/plain; charset=iso8859-1\n"
- "Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:110 ../arp.c:269
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
- msgstr "arp: nécessite un nom d'hôte\n"
- 
--#: ../arp.c:207 ../arp.c:221
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
- msgstr "Pas d'entrée ARP pour %s\n"
- 
--#: ../arp.c:239
-+#: ../arp.c:248
- #, fuzzy, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr "rarp: ne peut définir l'entrée depuis %s:%u\n"
- 
--#: ../arp.c:243
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr ""
- 
--#: ../arp.c:252
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
- msgstr ""
- 
--#: ../arp.c:282
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
- msgstr "arp: nécessite une adresse matériel\n"
- 
--#: ../arp.c:290
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr "arp: adresse matériel invalide\n"
- 
--#: ../arp.c:387
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr "arp: ne peut ouvrir le fichier ether %s !\n"
- 
--#: ../arp.c:403
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr "arp: erreur de format ligne %u du fichier ether %s !\n"
- 
--#: ../arp.c:416
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr "arp: ne peut définir l'entrée en ligne %u du fichier ether %s !\n"
- 
--#: ../arp.c:437
--msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-+#: ../arp.c:448
-+#, fuzzy, c-format
-+msgid ""
-+"Address                  HWtype  HWaddress           Flags Mask            "
-+"Iface\n"
- msgstr "Adresse\t\t\tTypeMap\tAdresseMat\t   Indicateurs\t\t  Iface\n"
- 
--#: ../arp.c:467
-+#: ../arp.c:476
-+#, fuzzy
-+msgid "<from_interface>"
-+msgstr "%s: interface inconnue: %s\n"
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
- msgstr ""
- 
--#: ../arp.c:484
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr ""
- 
--#: ../arp.c:490
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr ""
- 
--#: ../arp.c:496
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr ""
- 
--#: ../arp.c:513
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr ""
- 
--#: ../arp.c:592
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr "Entrées: %d\tIgnorées: %d\tTrouvées: %d\n"
- 
--#: ../arp.c:596
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr ""
- 
--#: ../arp.c:598
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
- msgstr "arp: aucune correspondance trouvée dans %d entrées\n"
- 
--#: ../arp.c:613
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
- "cache\n"
- msgstr ""
- "Syntaxe:\n"
--"  arp [-vn]  [<MAT>] [-i <if>] [-a] [<hôte>]              <-Affiche cache "
--"ARP\n"
-+"  arp [-vn]  [<MAT>] [-i <if>] [-a] [<hôte>]              <-Affiche cache ARP\n"
- 
--#: ../arp.c:614
-+#: ../arp.c:627
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
--msgstr ""
--"  arp [-v]          [-i <if>] -d  <hôte> [pub][nopub]     <-Supprime entrée "
--"ARP\n"
-+msgstr "  arp [-v]          [-i <if>] -d  <hôte> [pub][nopub]     <-Supprime entrée ARP\n"
- 
--#: ../arp.c:615
--#, fuzzy
-+#: ../arp.c:628
-+#, fuzzy, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
--msgstr ""
--"  arp [-vnD] [<MAT>] [-i <if>] -f  <fichier>              <-Ajout entrée "
--"depuis fichier\n"
-+msgstr "  arp [-vnD] [<MAT>] [-i <if>] -f  <fichier>              <-Ajout entrée depuis fichier\n"
- 
--#: ../arp.c:616
-+#: ../arp.c:629
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
--msgstr ""
--"  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [temp][nopub] <-Ajout "
--"entrée\n"
-+msgstr "  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [temp][nopub] <-Ajout entrée\n"
- 
--#: ../arp.c:617
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--"  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [netmask <nm>] pub  "
--"<-''-\n"
--
--#: ../arp.c:618
-+#: ../arp.c:630
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
- msgstr ""
--"  arp [-v]   [<MAT>] [-i <if>] -Ds <hôte> <if> [netmask <nm>] pub      "
--"<-''-\n"
-+"  arp [-v]   [<MAT>] [-i <if>] -Ds <hôte> <if> [netmask <nm>] pub      <-''-\n"
- "\n"
- 
--#: ../arp.c:620
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
--msgstr ""
--"        -a                       affiche (tous) les hôtes en style BSD\n"
-+msgstr "        -a                       affiche (tous) les hôtes en style BSD\n"
- 
--#: ../arp.c:621
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr "        -s, --set                définit une nouvelle entrée ARP\n"
- 
--#: ../arp.c:622
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr "        -d, --delete             supprime une entrée\n"
- 
--#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr "        -v, --verbose            mode verbeux\n"
- 
--#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
--msgid "        -n, --numeric            dont resolve names\n"
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, fuzzy, c-format
-+msgid "        -n, --numeric            don't resolve names\n"
- msgstr "        -n, --numeric            ne résout pas les noms\n"
- 
--#: ../arp.c:625
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
--msgstr ""
--"        -i, --device             spécifie l'interface réseau (p.ex. eth0)\n"
-+msgstr "        -i, --device             spécifie l'interface réseau (p.ex. eth0)\n"
- 
--#: ../arp.c:626
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
--msgstr ""
--"        -D, --use-device         lit l'<adrmat> depuis le périphérique\n"
-+msgstr "        -D, --use-device         lit l'<adrmat> depuis le périphérique\n"
- 
--#: ../arp.c:627
--#, fuzzy
-+#: ../arp.c:639
-+#, fuzzy, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr "        -r, --route              affiche la table de routage\n"
- 
--#: ../arp.c:628
--#, fuzzy
-+#: ../arp.c:640
-+#, fuzzy, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
- "        -f, --file               lit les nouvelles entrées dans le fichier\n"
- "\n"
- 
--#: ../arp.c:630 ../rarp.c:181
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
--msgstr ""
--"  <HW>=Utilisez '-H <hw>' pour spécifier le type d'adresse matériel. Défaut: "
--"%s\n"
-+msgstr "  <HW>=Utilisez '-H <hw>' pour spécifier le type d'adresse matériel. Défaut: %s\n"
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr "  Liste les types de matériels supportant ARP:\n"
- 
--#: ../arp.c:664
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr "%s: type de matétiel non supporté !\n"
- 
--#: ../arp.c:668
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr "%s: famille d'adresses non supportée !\n"
- 
--#: ../arp.c:703
--#, fuzzy
-+#: ../arp.c:716
-+#, fuzzy, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr "Table de routage pour `ddp' pas encore supporté.\n"
- 
--#: ../arp.c:713
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr "arp: %s: famille d'adresses inconnue.\n"
- 
--#: ../arp.c:722
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr "arp: %s: type de matériel inconnu.\n"
- 
--#: ../arp.c:741
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
- msgstr "arp: %s: le noyau ne supporte que 'inet'.\n"
- 
--#: ../arp.c:746
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr "arp: %s: type de matériel sans support ARP.\n"
- 
--#: ../hostname.c:69
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
- msgstr "Définit le nom de noeud à `%s'\n"
- 
--#: ../hostname.c:74
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr "%s: vous devez être root pour changer le nom de noeud\n"
- 
--#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr "%s: nom trop long\n"
- 
--#: ../hostname.c:89
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
- msgstr "Définit le nom d'hôte à `%s'\n"
- 
--#: ../hostname.c:94
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
- msgstr "%s: vous devez être root pour changer le nom d'hôte\n"
- 
--#: ../hostname.c:108
-+#: ../hostname.c:109
- #, c-format
- msgid "Setting domainname to `%s'\n"
- msgstr "Définit le nom de domaine à `%s'\n"
- 
--#: ../hostname.c:113
-+#: ../hostname.c:114
- #, c-format
- msgid "%s: you must be root to change the domain name\n"
- msgstr "%s: vous devez être root pour changer le nom de domaine\n"
-@@ -303,38 +308,36 @@
- msgid "Result: h_addr_list=`%s'\n"
- msgstr "Résultat : h_addr_list=`%s'\n"
- 
--#: ../hostname.c:209
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
- msgstr "%s: ne peut ouvrir `%s'\n"
- 
--#: ../hostname.c:223
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
--msgstr ""
--"Syntaxe : hostname [-v] {hôte|-F fichier}      définit le nom d'hôte (depuis "
--"le fichier)\n"
-+msgstr "Syntaxe : hostname [-v] {hôte|-F fichier}      définit le nom d'hôte (depuis le fichier)\n"
- 
--#: ../hostname.c:224
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
--msgstr ""
--"       domainname [-v] {domaine_nis|-F fichier}   définit le domaine NIS "
--"(depuis le fichier)\n"
-+msgstr "       domainname [-v] {domaine_nis|-F fichier}   définit le domaine NIS (depuis le fichier)\n"
- 
--#: ../hostname.c:226
--#, fuzzy
-+#: ../hostname.c:225
-+#, fuzzy, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
--msgstr ""
--"       nodename [-v] {nom_noeud|-F fichier}      Définit le nom de noeud "
--"DECnet (depuis le fichier)\n"
-+msgstr "       nodename [-v] {nom_noeud|-F fichier}      Définit le nom de noeud DECnet (depuis le fichier)\n"
- 
--#: ../hostname.c:228
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  affiche le nom formatté\n"
- 
--#: ../hostname.c:229
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
-@@ -342,7 +345,8 @@
- "       hostname [-v]                         affiche le nom d'hôte\n"
- "\n"
- 
--#: ../hostname.c:230
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
-@@ -350,7 +354,8 @@
- "       hostname -V|--version|-h|--help       affiche des infos et termine\n"
- "\n"
- 
--#: ../hostname.c:231
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
-@@ -358,45 +363,52 @@
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- 
--#: ../hostname.c:232
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr "    -s, --short           nom d'hôte court\n"
- 
--#: ../hostname.c:233
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr "    -a, --alias           noms d'alias\n"
- 
--#: ../hostname.c:234
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr "    -i, --ip-address      adresses de l'hôte\n"
- 
--#: ../hostname.c:235
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr "    -f, --fqdn, --long    nom d'hôte long (FQDN)\n"
- 
--#: ../hostname.c:236
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
- msgstr "    -d, --domain          nom de domaine DNS\n"
- 
--#: ../hostname.c:237
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
- msgstr "    -y, --yp, --nis       nom de domaine NIS/YP\n"
- 
--#: ../hostname.c:239
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
- msgstr "    -n, --node            nom de noeud DECnet\n"
- 
--#: ../hostname.c:241
--#, fuzzy
-+#: ../hostname.c:240
-+#, fuzzy, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
- msgstr ""
--"    -F, --file            lit le nom d'hôte ou le nom de domaine NIS depuis "
--"le fichier\n"
-+"    -F, --file            lit le nom d'hôte ou le nom de domaine NIS depuis le fichier\n"
- "\n"
- 
--#: ../hostname.c:243
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -411,15 +423,16 @@
- msgstr "%s: Vous ne pouvez changer le nom de domaine DNS avec cette commande\n"
- 
- #: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
- msgstr ""
- "\n"
--"Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez "
--"changer le\n"
-+"Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez changer le\n"
- 
- #: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
- msgstr ""
- "nom de domaine DNS (qui fait partie du FQDN) dans le fichier /etc/hosts.\n"
-@@ -439,554 +452,453 @@
- msgid "getnodename()=`%s'\n"
- msgstr "getnodename()=`%s'\n"
- 
--#: ../ifconfig.c:159
--#, c-format
--msgid "%-9.9s Link encap:%s  "
--msgstr "%-9.9s Lien encap:%s  "
-+#: ../ifconfig.c:107
-+#, fuzzy, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr ""
-+"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Indic\n"
- 
--#: ../ifconfig.c:164
--#, c-format
--msgid "HWaddr %s  "
--msgstr "HWaddr %s  "
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, fuzzy, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
- 
--#: ../ifconfig.c:167
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
- #, c-format
--msgid "Media:%s"
--msgstr "Media:%s"
-+msgid "No support for INET on this system.\n"
-+msgstr "Pas de support de INET sur ce système.\n"
- 
--#: ../ifconfig.c:169
--msgid "(auto)"
--msgstr "(auto)"
-+#: ../ifconfig.c:193
-+#, fuzzy, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
- 
--#: ../ifconfig.c:176
--#, c-format
--msgid "          %s addr:%s "
--msgstr "          %s adr:%s "
-+#: ../ifconfig.c:202
-+#, fuzzy, c-format
-+msgid ""
-+"Usage:\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+msgstr ""
-+"Syntaxe:\n"
-+"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <adresse>]\n"
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:204
- #, c-format
--msgid " P-t-P:%s "
--msgstr " P-t-P:%s "
-+msgid "  [add <address>[/<prefixlen>]]\n"
-+msgstr "  [add <adresse>[/<lg_prefixe>]]\n"
- 
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:205
- #, c-format
--msgid " Bcast:%s "
--msgstr " Bcast:%s "
-+msgid "  [del <address>[/<prefixlen>]]\n"
-+msgstr "  [del <adresse>[/<lg_prefixe>]]\n"
- 
--#: ../ifconfig.c:184
-+#: ../ifconfig.c:206
- #, c-format
--msgid " Mask:%s\n"
--msgstr " Masque:%s\n"
-+msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+msgstr "  [[-]broadcast [<adresse>]]  [[-]pointopoint [<adresse>]]\n"
- 
--#: ../ifconfig.c:201
--#, c-format
--msgid "          inet6 addr: %s/%d"
--msgstr "          adr inet6: %s/%d"
-+#: ../ifconfig.c:207
-+#, fuzzy, c-format
-+msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+msgstr "  [netmask <adresse>]  [dstaddr <adresse>]  [tunnel <adresse>]\n"
- 
--#: ../ifconfig.c:203
--msgid " Scope:"
--msgstr " Scope:"
-+#: ../ifconfig.c:210
-+#, c-format
-+msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+msgstr "  [outfill <NN>] [keepalive <NN>]\n"
- 
--#: ../ifconfig.c:206
--msgid "Global"
--msgstr "Global"
-+#: ../ifconfig.c:212
-+#, c-format
-+msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+msgstr "  [hw <HW> <adresse>]  [metric <NN>]  [mtu <NN>]\n"
- 
--#: ../ifconfig.c:209
--msgid "Link"
--msgstr "Lien"
-+#: ../ifconfig.c:213
-+#, c-format
-+msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- 
--#: ../ifconfig.c:212
--msgid "Site"
--msgstr "Site"
-+#: ../ifconfig.c:214
-+#, c-format
-+msgid "  [multicast]  [[-]promisc]\n"
-+msgstr "  [multicast]  [[-]promisc]\n"
- 
- #: ../ifconfig.c:215
--msgid "Compat"
--msgstr "Compat"
-+#, c-format
-+msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
- 
--#: ../ifconfig.c:218
--msgid "Host"
--msgstr "Hôte"
-+#: ../ifconfig.c:217
-+#, fuzzy, c-format
-+msgid "  [txqueuelen <NN>]\n"
-+msgstr "  [txqueuelen longueur]\n"
- 
--#: ../ifconfig.c:221
--msgid "Unknown"
--msgstr "Inconnu"
-+#: ../ifconfig.c:220
-+#, c-format
-+msgid "  [[-]dynamic]\n"
-+msgstr "  [[-]dynamic]\n"
- 
--#: ../ifconfig.c:236
-+#: ../ifconfig.c:222
- #, c-format
--msgid "          IPX/Ethernet II addr:%s\n"
--msgstr "          adr IPX/Ethernet II:%s\n"
-+msgid ""
-+"  [up|down] ...\n"
-+"\n"
-+msgstr ""
-+"  [up|down] ...\n"
-+"\n"
- 
--#: ../ifconfig.c:239
-+#: ../ifconfig.c:224
- #, c-format
--msgid "          IPX/Ethernet SNAP addr:%s\n"
--msgstr "          adr IPX/Ethernet SNAP:%s\n"
-+msgid "  <HW>=Hardware Type.\n"
-+msgstr "  <HW>=Type de matériel.\n"
- 
--#: ../ifconfig.c:242
-+#: ../ifconfig.c:225
- #, c-format
--msgid "          IPX/Ethernet 802.2 addr:%s\n"
--msgstr "          adr IPX/Ethernet 802.2:%s\n"
-+msgid "  List of possible hardware types:\n"
-+msgstr "  Liste des types de matériels possibles:\n"
- 
--#: ../ifconfig.c:245
-+#. 1 = ARPable
-+#: ../ifconfig.c:227
- #, c-format
--msgid "          IPX/Ethernet 802.3 addr:%s\n"
--msgstr "          adr IPX/Ethernet 802.3:%s\n"
-+msgid "  <AF>=Address family. Default: %s\n"
-+msgstr "  <AF>=famille d'Adresses. Défaut: %s\n"
- 
--#: ../ifconfig.c:255
-+#: ../ifconfig.c:228
- #, c-format
--msgid "          EtherTalk Phase 2 addr:%s\n"
--msgstr "          adr EtherTalk Phase 2:%s\n"
-+msgid "  List of possible address families:\n"
-+msgstr "  Liste des familles d'adresses possibles:\n"
- 
--#: ../ifconfig.c:264
-+#: ../ifconfig.c:303
- #, c-format
--msgid "          econet addr:%s\n"
--msgstr "          adr econet:%s\n"
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:270
--msgid "[NO FLAGS] "
--msgstr "[PAS INDICATEURS] "
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:272
--msgid "UP "
--msgstr "UP "
-+#: ../ifconfig.c:380
-+#, c-format
-+msgid "Unknown media type.\n"
-+msgstr "Type de média inconnu.\n"
- 
--#: ../ifconfig.c:274
--msgid "BROADCAST "
--msgstr "BROADCAST "
-+#: ../ifconfig.c:417
-+#, c-format
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
- 
--#: ../ifconfig.c:276
--msgid "DEBUG "
--msgstr "DEBUG "
-+#: ../ifconfig.c:429
-+#, c-format
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:278
--msgid "LOOPBACK "
--msgstr "LOOPBACK "
-+#: ../ifconfig.c:441
-+#, c-format
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:280
--msgid "POINTOPOINT "
--msgstr "POINTOPOINT "
-+#: ../ifconfig.c:465
-+#, c-format
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:282
--msgid "NOTRAILERS "
--msgstr "NOTRAILERS "
-+#: ../ifconfig.c:523
-+#, c-format
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:284
--msgid "RUNNING "
--msgstr "RUNNING "
-+#: ../ifconfig.c:652
-+#, c-format
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:286
--msgid "NOARP "
--msgstr "NOARP "
-+#: ../ifconfig.c:684
-+#, c-format
-+msgid "hw address type `%s' has no handler to set address. failed.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:288
--msgid "PROMISC "
--msgstr "PROMISC "
-+#: ../ifconfig.c:693
-+#, c-format
-+msgid "%s: invalid %s address.\n"
-+msgstr "%s: adresse %s invalide.\n"
- 
--#: ../ifconfig.c:290
--msgid "ALLMULTI "
--msgstr "ALLMULTI "
--
--#: ../ifconfig.c:292
--msgid "SLAVE "
--msgstr "SLAVE "
--
--#: ../ifconfig.c:294
--msgid "MASTER "
--msgstr "MASTER "
--
--#: ../ifconfig.c:296
--msgid "MULTICAST "
--msgstr "MULTICAST "
--
--#: ../ifconfig.c:299
--msgid "DYNAMIC "
--msgstr "DYNAMIC "
--
--#: ../ifconfig.c:302
--#, c-format
--msgid " MTU:%d  Metric:%d"
--msgstr " MTU:%d  Metric:%d"
--
--#: ../ifconfig.c:306
--#, c-format
--msgid "  Outfill:%d  Keepalive:%d"
--msgstr "  Outfill:%d  Keepalive:%d"
--
--#: ../ifconfig.c:320
--#, c-format
--msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
--msgstr "Paquets Reçus:%lu erreurs:%lu jetés:%lu débordements:%lu trames:%lu\n"
--
--#: ../ifconfig.c:325
--#, c-format
--msgid "             compressed:%lu\n"
--msgstr "             compressés:%lu\n"
--
--#: ../ifconfig.c:329
--#, c-format
--msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
--msgstr ""
--"Paquets transmis:%lu erreurs:%lu jetés:%lu débordements:%lu carrier:%lu\n"
--
--#: ../ifconfig.c:333
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
- #, c-format
--msgid "          collisions:%lu "
--msgstr "          collisions:%lu "
--
--#: ../ifconfig.c:335
--#, c-format
--msgid "compressed:%lu "
--msgstr "compressés:%lu "
--
--#: ../ifconfig.c:337
--#, c-format
--msgid "txqueuelen:%d "
--msgstr "lg file transmission:%d "
--
--#: ../ifconfig.c:345
--#, c-format
--msgid "Interrupt:%d "
--msgstr "Interruption:%d "
--
--#. Only print devices using it for
--#. I/O maps
--#: ../ifconfig.c:348
--#, c-format
--msgid "Base address:0x%x "
--msgstr "Adresse de base:0x%x "
--
--#: ../ifconfig.c:350
--#, c-format
--msgid "Memory:%lx-%lx "
--msgstr "Mémoire:%lx-%lx "
--
--#: ../ifconfig.c:353
--#, c-format
--msgid "DMA chan:%x "
--msgstr "Canal DMA:%x "
-+msgid "No support for INET6 on this system.\n"
-+msgstr "Pas de support de INET6 sur ce système.\n"
- 
--#: ../ifconfig.c:384 ../ifconfig.c:405
-+#: ../ifconfig.c:780 ../ifconfig.c:871
- #, c-format
--msgid "%s: unknown interface: %s\n"
--msgstr "%s: interface inconnue: %s\n"
--
--#: ../ifconfig.c:421
--msgid ""
--"Usage:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
--msgstr ""
--"Syntaxe:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <adresse>]\n"
--
--#: ../ifconfig.c:425
--msgid "  [add <address>[/<prefixlen>]]\n"
--msgstr "  [add <adresse>[/<lg_prefixe>]]\n"
--
--#: ../ifconfig.c:427
--msgid "  [del <address>[/<prefixlen>]]\n"
--msgstr "  [del <adresse>[/<lg_prefixe>]]\n"
--
--#: ../ifconfig.c:432
--msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
--msgstr "  [[-]broadcast [<adresse>]]  [[-]pointopoint [<adresse>]]\n"
--
--#: ../ifconfig.c:433
--#, fuzzy
--msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
--msgstr "  [netmask <adresse>]  [dstaddr <adresse>]  [tunnel <adresse>]\n"
--
--#: ../ifconfig.c:436
--msgid "  [outfill <NN>] [keepalive <NN>]\n"
--msgstr "  [outfill <NN>] [keepalive <NN>]\n"
--
--#: ../ifconfig.c:438
--msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
--msgstr "  [hw <HW> <adresse>]  [metric <NN>]  [mtu <NN>]\n"
--
--#: ../ifconfig.c:439
--msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--
--#: ../ifconfig.c:440
--msgid "  [multicast]  [[-]promisc]\n"
--msgstr "  [multicast]  [[-]promisc]\n"
--
--#: ../ifconfig.c:441
--msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
--msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
--
--#: ../ifconfig.c:443
--#, fuzzy
--msgid "  [txqueuelen <NN>]\n"
--msgstr "  [txqueuelen longueur]\n"
--
--#: ../ifconfig.c:446
--msgid "  [[-]dynamic]\n"
--msgstr "  [[-]dynamic]\n"
--
--#: ../ifconfig.c:448
--msgid ""
--"  [up|down] ...\n"
--"\n"
-+msgid "Interface %s not initialized\n"
- msgstr ""
--"  [up|down] ...\n"
--"\n"
--
--#: ../ifconfig.c:450
--msgid "  <HW>=Hardware Type.\n"
--msgstr "  <HW>=Type de matériel.\n"
--
--#: ../ifconfig.c:451
--msgid "  List of possible hardware types:\n"
--msgstr "  Liste des types de matériels possibles:\n"
--
--#. 1 = ARPable
--#: ../ifconfig.c:453
--#, c-format
--msgid "  <AF>=Address family. Default: %s\n"
--msgstr "  <AF>=famille d'Adresses. Défaut: %s\n"
--
--#: ../ifconfig.c:454
--msgid "  List of possible address families:\n"
--msgstr "  Liste des familles d'adresses possibles:\n"
--
--#: ../ifconfig.c:593
--msgid "Unknown media type.\n"
--msgstr "Type de média inconnu.\n"
- 
--#: ../ifconfig.c:881
--#, c-format
--msgid "%s: invalid %s address.\n"
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, fuzzy, c-format
-+msgid "Bad address.\n"
- msgstr "%s: adresse %s invalide.\n"
- 
--#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
--msgid "No support for INET6 on this system.\n"
--msgstr "Pas de support de INET6 sur ce système.\n"
--
--#: ../ifconfig.c:983
-+#: ../ifconfig.c:885
-+#, c-format
- msgid "Address deletion not supported on this system.\n"
- msgstr "Suppression d'adresses pas supporté par ce système.\n"
- 
--#: ../ifconfig.c:1066
--msgid "No support for INET on this system.\n"
--msgstr "Pas de support de INET sur ce système.\n"
-+#: ../ifconfig.c:957
-+#, fuzzy, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "Ne sait pas comment définir les adresses pour la famille %d.\n"
- 
--#: ../ifconfig.c:1076
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr "Pas de support de ECONET sur ce système.\n"
- 
--#: ../ifconfig.c:1084
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr "Ne sait pas comment définir les adresses pour la famille %d.\n"
- 
--#: ../netstat.c:383
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
--msgstr ""
--"(Pas d'infos lues pour \"-p\": geteuid()=%d mais vous devez être root.)\n"
-+msgstr "(Pas d'infos lues pour \"-p\": geteuid()=%d mais vous devez être root.)\n"
- 
--#: ../netstat.c:387
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
- msgstr ""
- "(Tous les processus ne peuvent être identifiés, les infos sur les processus\n"
--"non possédés ne seront pas affichées, vous devez être root pour les voir "
--"toutes.)\n"
-+"non possédés ne seront pas affichées, vous devez être root pour les voir toutes.)\n"
- 
--#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr "LISTENING"
- 
--#: ../netstat.c:395
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr "CONN SENT"
- 
--#: ../netstat.c:396 ../netstat.c:1168
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr "DISC SENT"
- 
--#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr "ESTABLISHED"
- 
--#: ../netstat.c:419
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr "sockets NET/ROM actives\n"
- 
--#: ../netstat.c:420
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
- msgstr ""
--"Utilisatr  Dest       Source     Periph  Etat         Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"Utilisatr  Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-"
-+"Q\n"
- 
--#: ../netstat.c:430 ../netstat.c:1208
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr ""
- 
--#: ../netstat.c:465
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr "SYN_SENT"
- 
--#: ../netstat.c:466
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr "SYN_RECV"
- 
--#: ../netstat.c:467
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr "FIN_WAIT1"
- 
--#: ../netstat.c:468
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr "FIN_WAIT2"
- 
--#: ../netstat.c:469
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr "TIME_WAIT"
- 
--#: ../netstat.c:470
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr "CLOSE"
- 
--#: ../netstat.c:471
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr "CLOSE_WAIT"
- 
--#: ../netstat.c:472
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr "LAST_ACK"
- 
--#: ../netstat.c:473
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr "LISTEN"
- 
--#: ../netstat.c:474
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr "CLOSING"
- 
--#: ../netstat.c:544
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr "attention, ligne igmp6 en erreur %d.\n"
- 
--#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
--#: ../netstat.c:935 ../netstat.c:940
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr "netstat: famille d'adresses pas supportée %d !\n"
- 
--#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr "attention, ligne igmp6 en erreur %d.\n"
- 
--#: ../netstat.c:666
-+#: ../netstat.c:677
-+#, fuzzy, c-format
-+msgid "Active X.25 sockets\n"
-+msgstr "Sockets AX.25 actives\n"
-+
-+#. IMHO, Vr/Vs is not very usefull --SF
-+#: ../netstat.c:679
-+#, fuzzy, c-format
-+msgid ""
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
-+msgstr "Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-Q\n"
-+
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr "attention, ligne tcp en erreur.\n"
- 
--#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr "off (0.00/%ld/%d)"
- 
--#: ../netstat.c:708
-+#: ../netstat.c:804
- #, fuzzy, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr "on%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:713
-+#: ../netstat.c:809
- #, fuzzy, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr "on%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:718
-+#: ../netstat.c:814
- #, fuzzy, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr "on%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr "unkn-%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:799
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr "attention, ligne udp en erreur.\n"
- 
--#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr "INCONNU"
- 
--#: ../netstat.c:860 ../netstat.c:980
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr "on%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:949
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr "attention, ligne raw en erreur.\n"
- 
--#: ../netstat.c:1028
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr "attention, ligne unix en erreur.\n"
- 
--#: ../netstat.c:1055
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr "STREAM"
- 
--#: ../netstat.c:1059
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr "DGRAM"
- 
--#: ../netstat.c:1063
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr "RAW"
- 
--#: ../netstat.c:1067
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr "RDM"
- 
--#: ../netstat.c:1071
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
- msgstr "SEQPACKET"
- 
--#: ../netstat.c:1080
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr "LIBRE"
- 
--#: ../netstat.c:1096
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr "ENCONNEXION"
- 
--#: ../netstat.c:1100
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr "CONNECTE"
- 
--#: ../netstat.c:1104
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr "ENDECONNEXION"
- 
--#: ../netstat.c:1135
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
- msgstr "Sockets du domaine UNIX actives"
- 
--#: ../netstat.c:1137 ../netstat.c:1666
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr "(serveurs et établies)"
- 
--#: ../netstat.c:1140 ../netstat.c:1669
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr "(seulement serveurs)"
- 
--#: ../netstat.c:1142 ../netstat.c:1671
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr "(sans serveurs)"
- 
--#: ../netstat.c:1145
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
-@@ -994,32 +906,36 @@
- "\n"
- "Proto RefCpt Indicatrs   Type       Etat          I-Node"
- 
--#: ../netstat.c:1147
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr " Chemin\n"
- 
--#: ../netstat.c:1167
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr "SABM SENT"
- 
--#: ../netstat.c:1170
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr "RECOVERY"
- 
--#: ../netstat.c:1184
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr "Sockets AX.25 actives\n"
- 
--#: ../netstat.c:1185
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr "Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-Q\n"
- 
--#: ../netstat.c:1228
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr ""
- 
--#: ../netstat.c:1279
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-@@ -1029,55 +945,53 @@
- "Proto Recv-Q Send-Q Adresse locale             Adresse distante           "
- "Etat"
- 
--#: ../netstat.c:1281
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr "Utilisatr"
- 
--#: ../netstat.c:1315
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr "ESTAB"
- 
--#: ../netstat.c:1323
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr "UNK."
- 
--#: ../netstat.c:1367
--msgid "     - no statistics available -"
--msgstr ""
--
--#: ../netstat.c:1370
--msgid "[NO FLAGS]"
--msgstr "[PAS INDICATEURS]"
--
--#: ../netstat.c:1400
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
- msgstr "Table d'interfaces noyau\n"
- 
--#: ../netstat.c:1401
-+#: ../netstat.c:1465
-+#, fuzzy, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
- "Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Indic\n"
- 
--#: ../netstat.c:1404
-+#: ../netstat.c:1469
- msgid "missing interface information"
- msgstr "informations d'interface manquantes"
- 
--#: ../netstat.c:1425
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
--"syntaxe: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"syntaxe: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- 
--#: ../netstat.c:1426
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr "       netstat [-vnNcaeol] [<Socket> ...]\n"
- 
--#: ../netstat.c:1427
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
-@@ -1085,27 +999,30 @@
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- 
--#: ../netstat.c:1429
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr "        -r, --route              affiche la table de routage\n"
- 
--#: ../netstat.c:1430
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr "        -i, --interfaces         affiche la table d'interfaces\n"
- 
--#: ../netstat.c:1431
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr ""
- "        -g, --groups             affiche les membres d'un groupe multicast\n"
- 
--#: ../netstat.c:1432
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
--msgstr ""
--"        -s, --statistics         affiche les statistiques réseau (comme "
--"SNMP)\n"
-+msgstr "        -s, --statistics         affiche les statistiques réseau (comme SNMP)\n"
- 
--#: ../netstat.c:1434
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
-@@ -1113,23 +1030,41 @@
- "        -M, --masquerade         affiche les connexions masquées\n"
- "\n"
- 
--#: ../netstat.c:1438 ../route.c:87
-+#: ../netstat.c:1505
-+#, fuzzy, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
-+msgstr "        -n, --numeric            ne résout pas les noms\n"
-+
-+#: ../netstat.c:1506
-+#, fuzzy, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
-+msgstr "        -n, --numeric            ne résout pas les noms\n"
-+
-+#: ../netstat.c:1507
-+#, fuzzy, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
-+msgstr "        -n, --numeric            ne résout pas les noms\n"
-+
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr "        -N, --symbolic           résoud les noms matériels\n"
- 
--#: ../netstat.c:1439 ../route.c:88
--#, fuzzy
-+#: ../netstat.c:1509 ../route.c:88
-+#, fuzzy, c-format
- msgid "        -e, --extend             display other/more information\n"
- msgstr ""
- "        -e, --extend             affiche d'autres/plus d'informations\n"
- 
--#: ../netstat.c:1440
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
- msgstr ""
- "        -p, --programs           affiche le nom du programme/PID des "
- "sockets\n"
- 
--#: ../netstat.c:1441
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
-@@ -1137,32 +1072,31 @@
- "        -c, --continuous         listing continu\n"
- "\n"
- 
--#: ../netstat.c:1442
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
--msgstr ""
--"        -l, --listening          affiche les sockets du serveur à l'écoute\n"
-+msgstr "        -l, --listening          affiche les sockets du serveur à l'écoute\n"
- 
--#: ../netstat.c:1443
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
--msgstr ""
--"        -a, --all, --listening   affiche toutes les prises (défaut: "
--"connectés)\n"
-+msgstr "        -a, --all, --listening   affiche toutes les prises (défaut: connectés)\n"
- 
--#: ../netstat.c:1444
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr "        -o, --timers             affiche les timers\n"
- 
--#: ../netstat.c:1445 ../route.c:89
--#, fuzzy
-+#: ../netstat.c:1515 ../route.c:89
-+#, fuzzy, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
--msgstr ""
--"        -F, --fib                affiche la Forwarding Infomation Base "
--"(défaut)\n"
-+msgstr "        -F, --fib                affiche la Forwarding Infomation Base (défaut)\n"
- 
--#: ../netstat.c:1446 ../route.c:90
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
-@@ -1170,110 +1104,118 @@
- "        -C, --cache              affiche le cache de routage au lieu de FIB\n"
- "\n"
- 
--#: ../netstat.c:1448
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- 
--#: ../netstat.c:1449 ../route.c:92
--#, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-+#: ../netstat.c:1519
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr "  <AF>=Utiliser '-A <af>' ou '--<af>' Défaut: %s\n"
- 
--#: ../netstat.c:1450 ../route.c:93
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
- msgstr "  Liste les familles d'adresses possibles (supportant le routage):\n"
- 
--#: ../netstat.c:1663
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr "Connexions Internet actives "
- 
--#: ../netstat.c:1673
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- "\n"
--"Proto Recv-Q Send-Q Adresse locale          Adresse distante        Etat     "
--"  "
-+"Proto Recv-Q Send-Q Adresse locale          Adresse distante        "
-+"Etat       "
- 
--#: ../netstat.c:1675
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr " Utilisatr  Inode     "
- 
--#: ../netstat.c:1678
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr " Timer"
- 
--#: ../netstat.c:1708
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
- msgstr ""
- 
--#: ../netstat.c:1709
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr ""
- 
--#: ../rarp.c:43
-+#: ../rarp.c:44
- msgid "This kernel does not support RARP.\n"
- msgstr "Ce noyau ne supporte pas RARP.\n"
- 
--#: ../rarp.c:82
-+#: ../rarp.c:83
- #, c-format
- msgid "no RARP entry for %s.\n"
- msgstr "pas d'entrée RARP pour %s.\n"
- 
--#: ../rarp.c:95
-+#: ../rarp.c:96
- #, c-format
- msgid "%s: bad hardware address\n"
- msgstr "%s: mauvaise adresse matériel\n"
- 
--#: ../rarp.c:127
-+#: ../rarp.c:128
- #, c-format
- msgid "rarp: cannot open file %s:%s.\n"
- msgstr "rarp: ne peut ouvrir le fichier %s:%s.\n"
- 
--#: ../rarp.c:139
-+#: ../rarp.c:140
- #, c-format
- msgid "rarp: format error at %s:%u\n"
- msgstr "rarp: erreur de format à %s:%u\n"
- 
--#: ../rarp.c:143 ../rarp.c:287
-+#: ../rarp.c:144 ../rarp.c:289
- #, c-format
- msgid "rarp: %s: unknown host\n"
- msgstr "rarp: %s: hôte inconnu\n"
- 
--#: ../rarp.c:146
-+#: ../rarp.c:147
- #, c-format
- msgid "rarp: cannot set entry from %s:%u\n"
- msgstr "rarp: ne peut définir l'entrée depuis %s:%u\n"
- 
--#: ../rarp.c:175
-+#: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
--msgstr ""
--"Usage: rarp -a                               liste les entrées en cache.\n"
-+msgstr "Usage: rarp -a                               liste les entrées en cache.\n"
- 
--#: ../rarp.c:176
-+#: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
--msgstr ""
--"       rarp -d <hostname>                    supprime l'entrée du cache.\n"
-+msgstr "       rarp -d <hostname>                    supprime l'entrée du cache.\n"
- 
--#: ../rarp.c:177
-+#: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
--msgstr ""
--"       rarp [<HW>] -s <hostname> <adrmat>    ajoute l'entrée au cache.\n"
-+msgstr "       rarp [<HW>] -s <hostname> <adrmat>    ajoute l'entrée au cache.\n"
- 
--#: ../rarp.c:178
-+#: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
--msgstr ""
--"       rarp -f                               ajoute les entrées depuis "
--"/etc/ethers.\n"
-+msgstr "       rarp -f                               ajoute les entrées depuis /etc/ethers.\n"
- 
--#: ../rarp.c:179
-+#: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
-@@ -1281,24 +1223,26 @@
- "       rarp -V                               affiche la version.\n"
- "\n"
- 
--#: ../rarp.c:236
-+#: ../rarp.c:238
- #, c-format
- msgid "%s: illegal option mix.\n"
- msgstr "%s: combinaison d'options illégales.\n"
- 
--#: ../rarp.c:267
-+#: ../rarp.c:269
- #, c-format
- msgid "rarp: %s: unknown hardware type.\n"
- msgstr "rarp: %s: type de matériel inconnu.\n"
- 
--#: ../route.c:79
-+#: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
- "Syntaxe: route [-nNvee] [-FC] [<AF>]           Liste les tables de routage "
- "noyau\n"
- 
--#: ../route.c:80
-+#: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
-@@ -1307,15 +1251,15 @@
- "pour AF.\n"
- "\n"
- 
--#: ../route.c:82
-+#: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
--msgstr ""
--"       route {-h|--help} [<AF>]              Utilisation détaillée pour l'AF "
--"spécifié.\n"
-+msgstr "       route {-h|--help} [<AF>]              Utilisation détaillée pour l'AF spécifié.\n"
- 
--#: ../route.c:83
-+#: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
-@@ -1325,16 +1269,23 @@
- "termine.\n"
- "\n"
- 
-+#: ../route.c:92
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>=Utiliser '-A <af>' ou '--<af>' Défaut: %s\n"
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr "Syntaxe: plipconfig [-a] [-i] [-v] interface\n"
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr "                  [nibble NN] [trigger NN]\n"
- 
- #: ../plipconfig.c:68
--#, fuzzy
-+#, fuzzy, c-format
- msgid "       plipconfig -V | --version\n"
- msgstr "       plipconfig -V\n"
- 
-@@ -1343,474 +1294,763 @@
- msgid "%s\tnibble %lu  trigger %lu\n"
- msgstr "%s\tnibble %lu  trigger %lu\n"
- 
--#: ../iptunnel.c:79
-+#: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr ""
- 
--#: ../iptunnel.c:80
-+#: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
- msgstr ""
- 
--#: ../iptunnel.c:81
-+#: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr ""
- 
--#: ../iptunnel.c:82
-+#: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
- msgstr ""
- 
--#: ../iptunnel.c:83
-+#: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
- msgstr ""
- 
--#: ../iptunnel.c:84
-+#: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr ""
- 
--#: ../iptunnel.c:85
-+#: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr ""
- 
--#: ../iptunnel.c:86
-+#: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr ""
- 
--#: ../iptunnel.c:87
-+#: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr ""
- 
--#: ../iptunnel.c:88
-+#: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr ""
- 
--#: ../iptunnel.c:326
-+#: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr ""
- 
--#: ../iptunnel.c:346
-+#: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr ""
- 
--#: ../iptunnel.c:361
-+#: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr ""
- 
--#: ../iptunnel.c:373
-+#: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr ""
- 
--#: ../iptunnel.c:411
-+#: ../iptunnel.c:417
- #, c-format
- msgid "%s: %s/ip  remote %s  local %s "
- msgstr ""
- 
--#: ../iptunnel.c:415
-+#: ../iptunnel.c:421
- #, fuzzy
- msgid "unknown"
- msgstr "Inconnu"
- 
--#: ../iptunnel.c:447
-+#: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr ""
- 
--#: ../iptunnel.c:449
-+#: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr ""
- 
--#: ../iptunnel.c:451
-+#: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr ""
- 
--#: ../iptunnel.c:453
-+#: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr ""
- 
--#: ../iptunnel.c:481
-+#: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
- msgstr ""
- 
--#: ../iptunnel.c:494
-+#: ../iptunnel.c:500
- #, c-format
- msgid "Failed to get type of [%s]\n"
- msgstr ""
- 
--#: ../iptunnel.c:510
-+#: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr ""
- 
--#: ../iptunnel.c:513
-+#: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr ""
- 
--#: ../statistics.c:45
-+#: ../statistics.c:47
- msgid "ICMP input histogram:"
- msgstr "Histogramme d'entrée ICMP"
- 
--#: ../statistics.c:46
-+#: ../statistics.c:48
- msgid "ICMP output histogram:"
- msgstr "Histogramme de sortie ICMP"
- 
--#: ../statistics.c:63
-+#: ../statistics.c:65
- #, c-format
- msgid "Forwarding is %s"
- msgstr "Réacheminement est %s"
- 
--#: ../statistics.c:64
--#, c-format
--msgid "Default TTL is %d"
-+#: ../statistics.c:66
-+#, fuzzy, c-format
-+msgid "Default TTL is %u"
- msgstr "TTL par défaut est %d"
- 
--#: ../statistics.c:65
--#, c-format
--msgid "%d total packets received"
-+#: ../statistics.c:67
-+#, fuzzy, c-format
-+msgid "%u total packets received"
- msgstr "%d paquets totaux reçus"
- 
--#: ../statistics.c:66
--#, c-format
--msgid "%d with invalid headers"
-+#: ../statistics.c:68
-+#, fuzzy, c-format
-+msgid "%u with invalid headers"
- msgstr "%d avec en-tête invalides"
- 
--#: ../statistics.c:67
--#, c-format
--msgid "%d with invalid addresses"
-+#: ../statistics.c:69
-+#, fuzzy, c-format
-+msgid "%u with invalid addresses"
- msgstr "%d avec adresses invalides"
- 
--#: ../statistics.c:68
--#, c-format
--msgid "%d forwarded"
-+#: ../statistics.c:70
-+#, fuzzy, c-format
-+msgid "%u forwarded"
- msgstr "%d réacheminées"
- 
--#: ../statistics.c:69
--#, c-format
--msgid "%d with unknown protocol"
-+#: ../statistics.c:71
-+#, fuzzy, c-format
-+msgid "%u with unknown protocol"
- msgstr "%d avec protocole inconnu"
- 
--#: ../statistics.c:70
--#, c-format
--msgid "%d incoming packets discarded"
-+#: ../statistics.c:72
-+#, fuzzy, c-format
-+msgid "%u incoming packets discarded"
- msgstr "%d paquets entrant jetés"
- 
--#: ../statistics.c:71
--#, c-format
--msgid "%d incoming packets delivered"
-+#: ../statistics.c:73
-+#, fuzzy, c-format
-+msgid "%u incoming packets delivered"
- msgstr "%d paquets entrant délivrés"
- 
--#: ../statistics.c:72
--#, c-format
--msgid "%d requests sent out"
-+#: ../statistics.c:74
-+#, fuzzy, c-format
-+msgid "%u requests sent out"
- msgstr "%d requêtes envoyées"
- 
- #. ?
--#: ../statistics.c:73
--#, c-format
--msgid "%d outgoing packets dropped"
-+#: ../statistics.c:75
-+#, fuzzy, c-format
-+msgid "%u outgoing packets dropped"
- msgstr "%d paquets sortant jetés"
- 
--#: ../statistics.c:74
--#, c-format
--msgid "%d dropped because of missing route"
-+#: ../statistics.c:76
-+#, fuzzy, c-format
-+msgid "%u dropped because of missing route"
- msgstr "%d jetés pour cause de route manquante"
- 
--#: ../statistics.c:75
--#, c-format
--msgid "%d fragments dropped after timeout"
-+#: ../statistics.c:77
-+#, fuzzy, c-format
-+msgid "%u fragments dropped after timeout"
- msgstr "%d fragments jetés après timeout"
- 
--#: ../statistics.c:76
--#, c-format
--msgid "%d reassemblies required"
-+#: ../statistics.c:78
-+#, fuzzy, c-format
-+msgid "%u reassemblies required"
- msgstr "%d nécessitant un réassemblage"
- 
- #. ?
--#: ../statistics.c:77
--#, c-format
--msgid "%d packets reassembled ok"
-+#: ../statistics.c:79
-+#, fuzzy, c-format
-+msgid "%u packets reassembled ok"
- msgstr "%d paquets réassemblés correctement"
- 
--#: ../statistics.c:78
--#, c-format
--msgid "%d packet reassembles failed"
-+#: ../statistics.c:80
-+#, fuzzy, c-format
-+msgid "%u packet reassembles failed"
- msgstr "%d paquets mal réassemblés"
- 
--#: ../statistics.c:79
--#, c-format
--msgid "%d fragments received ok"
-+#: ../statistics.c:81
-+#, fuzzy, c-format
-+msgid "%u fragments received ok"
- msgstr "%d fragments reçus correctement"
- 
--#: ../statistics.c:80
--#, c-format
--msgid "%d fragments failed"
-+#: ../statistics.c:82
-+#, fuzzy, c-format
-+msgid "%u fragments failed"
- msgstr "%d fragments en échec"
- 
--#: ../statistics.c:81
--#, c-format
--msgid "%d fragments created"
-+#: ../statistics.c:83
-+#, fuzzy, c-format
-+msgid "%u fragments created"
- msgstr "%d fragments créés"
- 
--#: ../statistics.c:86
--#, c-format
--msgid "%d ICMP messages received"
-+#: ../statistics.c:88
-+#, fuzzy, c-format
-+msgid "%u ICMP messages received"
- msgstr "%d messages ICMP reçus"
- 
--#: ../statistics.c:87
--#, c-format
--msgid "%d input ICMP message failed."
-+#: ../statistics.c:89
-+#, fuzzy, c-format
-+msgid "%u input ICMP message failed."
- msgstr "%d messages d'entrée ICMP en échec"
- 
--#: ../statistics.c:88 ../statistics.c:101
--#, c-format
--msgid "destination unreachable: %d"
-+#: ../statistics.c:90 ../statistics.c:103
-+#, fuzzy, c-format
-+msgid "destination unreachable: %u"
- msgstr "destination injoignable: %d"
- 
--#: ../statistics.c:89
--#, c-format
--msgid "timeout in transit: %d"
-+#: ../statistics.c:91
-+#, fuzzy, c-format
-+msgid "timeout in transit: %u"
- msgstr "timeout en transmission: %d"
- 
--#: ../statistics.c:90 ../statistics.c:103
--#, c-format
--msgid "wrong parameters: %d"
-+#: ../statistics.c:92 ../statistics.c:105
-+#, fuzzy, c-format
-+msgid "wrong parameters: %u"
- msgstr "mauvais paramètre: %d"
- 
- #. ?
--#: ../statistics.c:91
--#, c-format
--msgid "source quenchs: %d"
-+#: ../statistics.c:93
-+#, fuzzy, c-format
-+msgid "source quenches: %u"
- msgstr "Source Quenchs: %d"
- 
--#: ../statistics.c:92
--#, c-format
--msgid "redirects: %d"
-+#: ../statistics.c:94
-+#, fuzzy, c-format
-+msgid "redirects: %u"
- msgstr "Redirections: %d"
- 
--#: ../statistics.c:93
--#, c-format
--msgid "echo requests: %d"
-+#: ../statistics.c:95
-+#, fuzzy, c-format
-+msgid "echo requests: %u"
- msgstr "requêtes echo: %d"
- 
--#: ../statistics.c:94 ../statistics.c:107
--#, c-format
--msgid "echo replies: %d"
-+#: ../statistics.c:96 ../statistics.c:109
-+#, fuzzy, c-format
-+msgid "echo replies: %u"
- msgstr "réponses echo: %d"
- 
--#: ../statistics.c:95
--#, c-format
--msgid "timestamp request: %d"
-+#: ../statistics.c:97
-+#, fuzzy, c-format
-+msgid "timestamp request: %u"
- msgstr "requêtes datées: %d"
- 
--#: ../statistics.c:96
--#, c-format
--msgid "timestamp reply: %d"
-+#: ../statistics.c:98
-+#, fuzzy, c-format
-+msgid "timestamp reply: %u"
- msgstr "réponses datées: %d"
- 
--#: ../statistics.c:97
--#, c-format
--msgid "address mask request: %d"
-+#: ../statistics.c:99
-+#, fuzzy, c-format
-+msgid "address mask request: %u"
- msgstr "requêtes de masque d'adresse: %d"
- 
- #. ?
--#: ../statistics.c:98
--msgid "address mask replies"
--msgstr "réponses de masque d'adresses"
-+#: ../statistics.c:100 ../statistics.c:113
-+#, fuzzy, c-format
-+msgid "address mask replies: %u"
-+msgstr "réponses de masque d'adresse: %d"
- 
- #. ?
--#: ../statistics.c:99
--#, c-format
--msgid "%d ICMP messages sent"
-+#: ../statistics.c:101
-+#, fuzzy, c-format
-+msgid "%u ICMP messages sent"
- msgstr "%d messages ICMP envoyés"
- 
--#: ../statistics.c:100
--#, c-format
--msgid "%d ICMP messages failed"
-+#: ../statistics.c:102
-+#, fuzzy, c-format
-+msgid "%u ICMP messages failed"
- msgstr "%d messages ICMP en échec"
- 
--#: ../statistics.c:102
--#, c-format
--msgid "time exceeded: %d"
-+#: ../statistics.c:104
-+#, fuzzy, c-format
-+msgid "time exceeded: %u"
- msgstr "temps dépassé: %d"
- 
- #. ?
--#: ../statistics.c:104
--#, c-format
--msgid "source quench: %d"
-+#: ../statistics.c:106
-+#, fuzzy, c-format
-+msgid "source quench: %u"
- msgstr "Source Quench: %d"
- 
--#: ../statistics.c:105
--#, c-format
--msgid "redirect: %d"
-+#: ../statistics.c:107
-+#, fuzzy, c-format
-+msgid "redirect: %u"
- msgstr "redirection: %d"
- 
--#: ../statistics.c:106
--#, c-format
--msgid "echo request: %d"
-+#: ../statistics.c:108
-+#, fuzzy, c-format
-+msgid "echo request: %u"
- msgstr "requête echo: %d"
- 
--#: ../statistics.c:108
--#, c-format
--msgid "timestamp requests: %d"
-+#: ../statistics.c:110
-+#, fuzzy, c-format
-+msgid "timestamp requests: %u"
- msgstr "requêtes datées: %d"
- 
--#: ../statistics.c:109
--#, c-format
--msgid "timestamp replies: %d"
-+#: ../statistics.c:111
-+#, fuzzy, c-format
-+msgid "timestamp replies: %u"
- msgstr "réponses datées: %d"
- 
--#: ../statistics.c:110
--#, c-format
--msgid "address mask requests: %d"
-+#: ../statistics.c:112
-+#, fuzzy, c-format
-+msgid "address mask requests: %u"
- msgstr "requêtes de masque d'adresse: %d"
- 
--#: ../statistics.c:111
--#, c-format
--msgid "address mask replies: %d"
--msgstr "réponses de masque d'adresse: %d"
--
--#: ../statistics.c:116
-+#: ../statistics.c:118
- #, c-format
- msgid "RTO algorithm is %s"
- msgstr "algorithme RTO est %s"
- 
--#: ../statistics.c:120
--#, c-format
--msgid "%d active connections openings"
-+#: ../statistics.c:122
-+#, fuzzy, c-format
-+msgid "%u active connections openings"
- msgstr "%d ouvertures de connexions actives"
- 
--#: ../statistics.c:121
--#, c-format
--msgid "%d passive connection openings"
-+#: ../statistics.c:123
-+#, fuzzy, c-format
-+msgid "%u passive connection openings"
- msgstr "%d ouvertures de connexions passives"
- 
--#: ../statistics.c:122
--#, c-format
--msgid "%d failed connection attempts"
-+#: ../statistics.c:124
-+#, fuzzy, c-format
-+msgid "%u failed connection attempts"
- msgstr "%d tentatives de connexion échouées"
- 
--#: ../statistics.c:123
--#, c-format
--msgid "%d connection resets received"
-+#: ../statistics.c:125
-+#, fuzzy, c-format
-+msgid "%u connection resets received"
- msgstr "%d réinitialisations de connexions reçues"
- 
--#: ../statistics.c:124
--#, c-format
--msgid "%d connections established"
-+#: ../statistics.c:126
-+#, fuzzy, c-format
-+msgid "%u connections established"
- msgstr "%d connexions établies"
- 
--#: ../statistics.c:125
--#, c-format
--msgid "%d segments received"
-+#: ../statistics.c:127
-+#, fuzzy, c-format
-+msgid "%u segments received"
- msgstr "%d segments reçus"
- 
--#: ../statistics.c:126
--#, c-format
--msgid "%d segments send out"
-+#: ../statistics.c:128
-+#, fuzzy, c-format
-+msgid "%u segments send out"
- msgstr "%d segments envoyés"
- 
--#: ../statistics.c:127
--#, c-format
--msgid "%d segments retransmited"
-+#: ../statistics.c:129
-+#, fuzzy, c-format
-+msgid "%u segments retransmited"
- msgstr "%d segments retransmis"
- 
--#: ../statistics.c:128
--#, c-format
--msgid "%d bad segments received."
-+#: ../statistics.c:130
-+#, fuzzy, c-format
-+msgid "%u bad segments received."
- msgstr "%d mauvais segments reçus."
- 
--#: ../statistics.c:129
--#, c-format
--msgid "%d resets sent"
-+#: ../statistics.c:131
-+#, fuzzy, c-format
-+msgid "%u resets sent"
- msgstr "%d réinitialisations envoyées"
- 
--#: ../statistics.c:134
--#, c-format
--msgid "%d packets received"
-+#: ../statistics.c:136
-+#, fuzzy, c-format
-+msgid "%u packets received"
- msgstr "%d paquets reçus"
- 
--#: ../statistics.c:135
--#, c-format
--msgid "%d packets to unknown port received."
-+#: ../statistics.c:137
-+#, fuzzy, c-format
-+msgid "%u packets to unknown port received."
- msgstr "%d paquets reçus pour un port inconnu"
- 
--#: ../statistics.c:136
--#, c-format
--msgid "%d packet receive errors"
-+#: ../statistics.c:138
-+#, fuzzy, c-format
-+msgid "%u packet receive errors"
- msgstr "%d erreurs en réception de paquets"
- 
--#: ../statistics.c:137
-+#: ../statistics.c:139
-+#, fuzzy, c-format
-+msgid "%u packets sent"
-+msgstr "%d paquets envoyés"
-+
-+#: ../statistics.c:144
-+#, fuzzy, c-format
-+msgid "%u SYN cookies sent"
-+msgstr "%d SYN-Cookies reçus"
-+
-+#: ../statistics.c:145
-+#, fuzzy, c-format
-+msgid "%u SYN cookies received"
-+msgstr "%d SYN-Cookies reçus"
-+
-+#: ../statistics.c:146
-+#, fuzzy, c-format
-+msgid "%u invalid SYN cookies received"
-+msgstr "%d SYN-Cookies reçus incorrects"
-+
-+#: ../statistics.c:148
-+#, fuzzy, c-format
-+msgid "%u resets received for embryonic SYN_RECV sockets"
-+msgstr "%d réinitialisations reçues pour sockets SYN_RECV embryonnaires"
-+
-+#: ../statistics.c:150
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue because of socket buffer overrun"
-+msgstr "%d paquets supprimés de la file de réception en raison de tampon de sockets plein"
-+
-+#. obsolete: 2.2.0 doesn't do that anymore
-+#: ../statistics.c:153
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue"
-+msgstr "%d paquets supprimés de la file hors service"
-+
-+#: ../statistics.c:154
-+#, fuzzy, c-format
-+msgid ""
-+"%u packets dropped from out-of-order queue because of socket buffer overrun"
-+msgstr "%d paquets jetés de la file hors service en raison de tampon de sockets plein"
-+
-+#: ../statistics.c:156
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because they were out-of-window"
-+msgstr "%d ICMP paquets jetés car hors de la fenêtre"
-+
-+#: ../statistics.c:158
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because socket was locked"
-+msgstr "%d paquets ICMP jetés car la socket a été vérouillée"
-+
-+#: ../statistics.c:160
- #, c-format
--msgid "%d packets sent"
-+msgid "%u TCP sockets finished time wait in fast timer"
-+msgstr ""
-+
-+#: ../statistics.c:161
-+#, c-format
-+msgid "%u time wait sockets recycled by time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:162
-+#, c-format
-+msgid "%u TCP sockets finished time wait in slow timer"
-+msgstr ""
-+
-+#: ../statistics.c:163
-+#, c-format
-+msgid "%u passive connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:165
-+#, c-format
-+msgid "%u active connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:167
-+#, c-format
-+msgid "%u packets rejects in established connections because of timestamp"
-+msgstr ""
-+
-+#: ../statistics.c:169
-+#, fuzzy, c-format
-+msgid "%u delayed acks sent"
- msgstr "%d paquets envoyés"
- 
--#: ../statistics.c:142
-+#: ../statistics.c:170
- #, c-format
--msgid "%d SYN cookies sent"
-+msgid "%u delayed acks further delayed because of locked socket"
- msgstr ""
- 
--#: ../statistics.c:143
-+#: ../statistics.c:172
- #, c-format
--msgid "%d SYN cookies received"
--msgstr "%d SYN-Cookies reçus"
-+msgid "Quick ack mode was activated %u times"
-+msgstr ""
- 
--#: ../statistics.c:144
-+#: ../statistics.c:173
- #, c-format
--msgid "%d invalid SYN cookies received"
--msgstr "%d SYN-Cookies reçus incorrects"
-+msgid "%u times the listen queue of a socket overflowed"
-+msgstr ""
- 
--#: ../statistics.c:146
-+#: ../statistics.c:175
- #, c-format
--msgid "%d resets received for embryonic SYN_RECV sockets"
--msgstr "%d réinitialisations reçues pour sockets SYN_RECV embryonnaires"
-+msgid "%u SYNs to LISTEN sockets ignored"
-+msgstr ""
- 
--#: ../statistics.c:148
-+#: ../statistics.c:176
- #, c-format
--msgid "%d packets pruned from receive queue because of socket buffer overrun"
-+msgid "%u packets directly queued to recvmsg prequeue."
- msgstr ""
--"%d paquets supprimés de la file de réception en raison de tampon de sockets "
--"plein"
- 
--#. obsolete: 2.2.0 doesn't do that anymore
--#: ../statistics.c:151
-+#: ../statistics.c:178
-+#, c-format
-+msgid "%u of bytes directly received from backlog"
-+msgstr ""
-+
-+#: ../statistics.c:180
- #, c-format
--msgid "%d packets pruned from out-of-order queue"
-+msgid "%u of bytes directly received from prequeue"
-+msgstr ""
-+
-+#: ../statistics.c:182
-+#, fuzzy, c-format
-+msgid "%u packets dropped from prequeue"
- msgstr "%d paquets supprimés de la file hors service"
- 
--#: ../statistics.c:152
-+#: ../statistics.c:183
-+#, fuzzy, c-format
-+msgid "%u packet headers predicted"
-+msgstr "%d paquets reçus"
-+
-+#: ../statistics.c:184
- #, c-format
--msgid ""
--"%d packets dropped from out-of-order queue because of socket buffer overrun"
-+msgid "%u packets header predicted and directly queued to user"
- msgstr ""
--"%d paquets jetés de la file hors service en raison de tampon de sockets plein"
- 
--#: ../statistics.c:154
-+#: ../statistics.c:186
- #, c-format
--msgid "%d ICMP packets dropped because they were out-of-window"
--msgstr "%d ICMP paquets jetés car hors de la fenêtre"
-+msgid "Ran %u times out of system memory during packet sending"
-+msgstr ""
- 
--#: ../statistics.c:156
-+#: ../statistics.c:188
-+#, fuzzy, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr "%d paquets reçus pour un port inconnu"
-+
-+#: ../statistics.c:189
- #, c-format
--msgid "%d ICMP packets dropped because socket was locked"
--msgstr "%d paquets ICMP jetés car la socket a été vérouillée"
-+msgid "%u predicted acknowledgments"
-+msgstr ""
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
-+
-+#: ../statistics.c:192
-+#, fuzzy, c-format
-+msgid "%u bad SACKs received"
-+msgstr "%d mauvais segments reçus."
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:197
-+#, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr ""
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr ""
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, fuzzy, c-format
-+msgid "%u retransmits lost"
-+msgstr "%d réinitialisations envoyées"
-+
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, fuzzy, c-format
-+msgid "%u fast retransmits"
-+msgstr "%d segments retransmis"
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, fuzzy, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "%d segments retransmis"
-+
-+#: ../statistics.c:210
-+#, fuzzy, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "%d paquets mal réassemblés"
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, fuzzy, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr "%d paquets supprimés de la file de réception en raison de tampon de sockets plein"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, fuzzy, c-format
-+msgid "%u DSACKs received"
-+msgstr "%d paquets reçus"
-+
-+#: ../statistics.c:216
-+#, fuzzy, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "%d paquets totaux reçus"
-+
-+#: ../statistics.c:217
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "%d réinitialisations de connexions reçues"
-+
-+#: ../statistics.c:218
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "%d réinitialisations de connexions reçues"
-+
-+#: ../statistics.c:219
-+#, fuzzy, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "%d réinitialisations de connexions reçues"
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, fuzzy, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "%d réinitialisations de connexions reçues"
- 
- #: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr "activée"
- 
--#: ../statistics.c:222
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr "désactivée"
- 
--#: ../statistics.c:272
--#, c-format
--msgid "unknown title %s\n"
--msgstr "titre inconnu %s\n"
--
--#: ../statistics.c:298
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr "erreur d'analyse de /proc/net/snmp"
- 
--#: ../statistics.c:311
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr "ne peut ouvrir /proc/net/snmp"
- 
-@@ -1824,89 +2064,95 @@
- msgid "Cannot change line discipline to `%s'.\n"
- msgstr "Ne peut changer la discipline de ligne à `%s'.\n"
- 
--#: ../lib/af.c:145 ../lib/hw.c:148
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr "UNSPEC"
- 
--#: ../lib/af.c:147
-+#: ../lib/af.c:155
- msgid "UNIX Domain"
- msgstr "Domaine UNIX"
- 
--#: ../lib/af.c:150
-+#: ../lib/af.c:158
- msgid "DARPA Internet"
- msgstr "DARPA Internet"
- 
--#: ../lib/af.c:153
-+#: ../lib/af.c:161
- msgid "IPv6"
- msgstr "IPv6"
- 
--#: ../lib/af.c:156 ../lib/hw.c:169
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr "AMPR AX.25"
- 
--#: ../lib/af.c:159 ../lib/hw.c:175
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr "AMPR NET/ROM"
- 
--#: ../lib/af.c:162
-+#: ../lib/af.c:170
- msgid "Novell IPX"
- msgstr ""
- 
--#: ../lib/af.c:165
-+#: ../lib/af.c:173
- msgid "Appletalk DDP"
- msgstr "Appletalk DDP"
- 
--#: ../lib/af.c:168 ../lib/hw.c:207
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr "Econet"
- 
--#: ../lib/af.c:171 ../lib/hw.c:172
-+#: ../lib/af.c:179
-+msgid "CCITT X.25"
-+msgstr ""
-+
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr "AMPR ROSE"
- 
--#: ../lib/af.c:174 ../lib/hw.c:160
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr "Ash"
- 
--#: ../lib/af.c:232
-+#: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr "Ne fournissez pas plus d'une famille d'adresses SVP.\n"
- 
--#: ../lib/af.c:293
-+#: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr "Trop d'arguments de familles d'adresses.\n"
- 
--#: ../lib/af.c:304
-+#: ../lib/af.c:315
- #, c-format
- msgid "Unknown address family `%s'.\n"
- msgstr "Famille d'adresses inconnue `%s'.\n"
- 
--#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
--#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
--#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
--#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
--msgid "[NONE SET]"
--msgstr "[INDEFINI]"
--
--#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-+#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
- #, c-format
- msgid "in_arcnet(%s): invalid arcnet address!\n"
- msgstr "in_arcnet(%s): adresse arcnet invalide !\n"
- 
--#: ../lib/arcnet.c:108
-+#: ../lib/arcnet.c:97
- #, c-format
- msgid "in_arcnet(%s): trailing : ignored!\n"
- msgstr "in_arcnet(%s): restant : ignoré !\n"
- 
--#: ../lib/arcnet.c:120
-+#: ../lib/arcnet.c:109
- #, c-format
- msgid "in_arcnet(%s): trailing junk!\n"
- msgstr "in_arcnet(%s): le restant à la poubelle !\n"
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
- msgstr "Adresse Ash malformée"
- 
-+#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-+#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-+#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-+msgid "[NONE SET]"
-+msgstr "[INDEFINI]"
-+
- #: ../lib/ax25.c:97 ../lib/netrom.c:100
- msgid "Invalid callsign"
- msgstr "Signal d'appel invalide"
-@@ -1916,22 +2162,21 @@
- msgstr "Signal d'appel trop long"
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr "AX.25 pas configuré sur ce système.\n"
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr "Table de routage AX.25 du noyau\n"
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr "Destination  Iface    Utilisation\n"
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr "Table de routage pour `ddp' pas encore supporté.\n"
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1947,153 +2192,171 @@
- msgid "in_ether(%s): trailing junk!\n"
- msgstr "in_ether(%s): le restant à la poubelle !\n"
- 
--#: ../lib/fddi.c:95 ../lib/fddi.c:110
-+#: ../lib/fddi.c:84 ../lib/fddi.c:99
- #, c-format
- msgid "in_fddi(%s): invalid fddi address!\n"
- msgstr "in_fddi(%s): adresse fddi invalide!\n"
- 
--#: ../lib/fddi.c:122
-+#: ../lib/fddi.c:111
- #, c-format
- msgid "in_fddi(%s): trailing : ignored!\n"
- msgstr "in_fddi(%s): restant ignoré !\n"
- 
--#: ../lib/fddi.c:134
-+#: ../lib/fddi.c:123
- #, c-format
- msgid "in_fddi(%s): trailing junk!\n"
- msgstr "in_fddi(%s): le restant à la poubelle !\n"
- 
--#: ../lib/getroute.c:97 ../lib/setroute.c:76
-+#: ../lib/getroute.c:101 ../lib/setroute.c:80
- #, c-format
- msgid "Address family `%s' not supported.\n"
- msgstr "Famille d'adresses `%s' non supportée.\n"
- 
--#: ../lib/getroute.c:103 ../lib/setroute.c:80
-+#: ../lib/getroute.c:107 ../lib/setroute.c:84
- #, c-format
- msgid "No routing for address family `%s'.\n"
- msgstr "Pas de routage pour la famille d'adresses `%s'.\n"
- 
--#: ../lib/hippi.c:96 ../lib/hippi.c:111
-+#: ../lib/hippi.c:84 ../lib/hippi.c:99
- #, c-format
- msgid "in_hippi(%s): invalid hippi address!\n"
- msgstr "in_hippi(%s): adresse hippi invalide!\n"
- 
--#: ../lib/hippi.c:123
-+#: ../lib/hippi.c:111
- #, c-format
- msgid "in_hippi(%s): trailing : ignored!\n"
- msgstr "in_hippi(%s): restant ignoré !\n"
- 
--#: ../lib/hippi.c:134
-+#: ../lib/hippi.c:122
- #, c-format
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr "in_hippi(%s): le restant à la poubelle !\n"
- 
--#: ../lib/hw.c:147
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr "Boucle locale"
- 
--#: ../lib/hw.c:150
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr "IP ligne série"
- 
--#: ../lib/hw.c:151
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr "IP ligne série - VJ "
- 
--#: ../lib/hw.c:152
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr "IP ligne série - 6 bits"
- 
--#: ../lib/hw.c:153
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr "IP ligne série - 6 bits VJ"
- 
--#: ../lib/hw.c:154
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr "IP ligne série adaptative"
- 
--#: ../lib/hw.c:157
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr "Ethernet"
- 
--#: ../lib/hw.c:163
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr "Fiber Distributed Data Interface"
- 
--#: ../lib/hw.c:166
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr "HIPPI"
- 
--#: ../lib/hw.c:178
-+#: ../lib/hw.c:191
-+msgid "generic X.25"
-+msgstr ""
-+
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr "IPIP Tunnel"
- 
--#: ../lib/hw.c:181
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
- msgstr "Protocole Point-à-Point"
- 
--#: ../lib/hw.c:184
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr "(Cisco)-HDLC"
- 
--#: ../lib/hw.c:185
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:188
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr "ARCnet"
- 
--#: ../lib/hw.c:191
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr "Frame Relay DLCI"
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr "Périphériue d'accès Frame Relay"
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr "IPv6-dans-IPv4"
- 
--#: ../lib/hw.c:198
-+#: ../lib/hw.c:214
- #, fuzzy
- msgid "IrLAP"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:201
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr ""
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:219
- msgid "16/4 Mbps Token Ring (New)"
- msgstr ""
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
- msgstr "rresolve: famille d'adresses non suportée %d !\n"
- 
--#: ../lib/inet6_gr.c:79
-+#: ../lib/inet6.c:131
-+#, fuzzy
-+msgid "[UNKNOWN]"
-+msgstr "INCONNU"
-+
-+#: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr "INET6 (IPv6) pas configuré sur ce système.\n"
- 
--#: ../lib/inet6_gr.c:82
-+#: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
- msgstr "Table de routage IPv6 du noyau\n"
- 
--#: ../lib/inet6_gr.c:84
-+#: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
- msgstr ""
--"Destination                                 Prochain Hop                     "
--"       Indic Metric Ref    Utilis. Iface\n"
-+"Destination                                 Prochain "
-+"Hop                            Indic Metric Ref    Utilis. Iface\n"
- 
--#: ../lib/inet6_gr.c:158
-+#: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr "Cache voisin IPv6 du noyau\n"
- 
--#: ../lib/inet6_gr.c:161
-+#: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
-@@ -2101,39 +2364,45 @@
- "Voisin                                      Adresse MAT       Iface    Indic "
- "Ref Etat\n"
- 
--#: ../lib/inet6_gr.c:165
-+#: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
--msgstr ""
--"Voisin                                      Adresse MAT       Iface    Indic "
--"Ref Etat             Bloqué(sec) Détuit(sec)\n"
-+msgstr "Voisin                                      Adresse MAT       Iface    Indic Ref Etat             Bloqué(sec) Détuit(sec)\n"
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr "Syntaxe: inet6_route [-vF] del Cible\n"
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr "       inet6_route [-vF] add Cible [gw Gw] [metric M] [[dev] If]\n"
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr "       inet6_route [-FC] flush      PAS supporté\n"
- 
--#: ../lib/inet6_sr.c:182
-+#: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
- msgstr "Flush de table de routage `inet6' pas supporté\n"
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr "INET (IPv4) pas configuré sur ce système.\n"
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
- msgstr "Table de routage IP du noyau\n"
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2142,26 +2411,26 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
--msgstr ""
--"Destination     Passerelle      Genmask         Indic   MSS Fenêtre irtt "
--"Iface\n"
-+msgstr "Destination     Passerelle      Genmask         Indic   MSS Fenêtre irtt Iface\n"
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
--msgstr ""
--"Destination     Passerelle      Genmask         Indic Metric Ref    Use "
--"Iface    MSS  Fenêtre irtt\n"
-+msgstr "Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface    MSS  Fenêtre irtt\n"
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
- msgstr "cache de routage IP du noyau\n"
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2170,30 +2439,28 @@
- "Iface\n"
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
--msgstr ""
--"Source          Destination     Passerelle      Indic   MSS Fenêtre irtt "
--"Iface\n"
-+msgstr "Source          Destination     Passerelle      Indic   MSS Fenêtre irtt Iface\n"
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
--msgstr ""
--"Source          Destination     Passerelle      Indic Metric Ref    Use "
--"Iface    MSS  Fenêtre irtt  HH  Arp\n"
-+msgstr "Source          Destination     Passerelle      Indic Metric Ref    Use Iface    MSS  Fenêtre irtt  HH  Arp\n"
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
--msgstr ""
--"Source          Destination     Passerelle      Flags Metric Ref    Use "
--"Iface    MSS  Fenêtre irtt  TOS HHRef HHUptod     SpecDst\n"
-+msgstr "Source          Destination     Passerelle      Flags Metric Ref    Use Iface    MSS  Fenêtre irtt  TOS HHRef HHUptod     SpecDst\n"
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
-@@ -2201,29 +2468,34 @@
- "Syntaxe: inet_route [-vF] del {-host|-net} Cible[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Cible[/prefix] [gw Gw] [metric M]\n"
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Cible[/prefix] [metric M] reject\n"
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr "       inet_route [-FC] flush      PAS supporté\n"
- 
-@@ -2233,15 +2505,17 @@
- msgstr "route: %s: ne peut utiliser un RESEAU comme passerelle!\n"
- 
- #: ../lib/inet_sr.c:174
--#, fuzzy
-+#, fuzzy, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr "route: MSS invalide.\n"
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr "route: fenêtre invalide.\n"
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr "route: rtt initial invalide.\n"
- 
-@@ -2256,75 +2530,92 @@
- msgstr "route: netmask bogué %s\n"
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr "route: netmask ne correspond pas à l'adresse de route\n"
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
- msgstr "Flush de table de routage `inet' pas supporté\n"
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
- msgstr "Modification de cache de routage `inet' pas supporté\n"
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr "IPX pas configuré sur ce système.\n"
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
- msgstr "Table de routage IPX du noyau\n"
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
- msgstr "Destination               Réseau Routeur            Noeud Routeur\n"
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
- msgstr "IPX: ceci doit être écrit\n"
- 
--#: ../lib/masq_info.c:197
-+#: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr "Entrées IP Masquerade\n"
- 
--#: ../lib/masq_info.c:200
-+#: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr "prot   expire source               destination          ports\n"
- 
--#: ../lib/masq_info.c:203
-+#: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
--"prot   expire    initseq delta precd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta precd source               "
-+"destination          ports\n"
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr "NET/ROM pas configuré sur ce système.\n"
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
- msgstr "Table de routage NET/ROM du noyau\n"
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr "Destination  Mnemoniq  Qualité  Voisin     Iface\n"
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
- msgstr "utilisation netrom\n"
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
- msgstr "NET/ROM: ceci doit être écrit\n"
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr "Vous ne pouvez démarrer PPP avec ce programme.\n"
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
- msgstr "Désolé, utilisez pppd !\n"
- 
-@@ -2333,49 +2624,314 @@
- msgstr "L'adresse de noeud doit avoir 10 chiffres"
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr "ROSE pas configuré sur ce système.\n"
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
- msgstr "Table de routage ROSE du noyau\n"
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr "in_tr(%s): adresse token-ring invalide !\n"
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr "in_tr(%s): restant : ignoré !\n"
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr "in_tr(%s): restant à la poubelle !\n"
- 
--#: ../lib/interface.c:124
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
- msgstr "attention: pas de socket inet disponible: %s\n"
- 
--#: ../lib/interface.c:270
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr ""
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:504
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr "Périphérique non trouvé"
- 
--#: ../lib/interface.c:508
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
- msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
- 
--#: ../lib/sockets.c:59
-+#: ../lib/interface.c:608
-+msgid "     - no statistics available -"
-+msgstr ""
-+
-+#: ../lib/interface.c:612
-+#, c-format
-+msgid "[NO FLAGS]"
-+msgstr "[PAS INDICATEURS]"
-+
-+#: ../lib/interface.c:688
-+#, c-format
-+msgid "%-9.9s Link encap:%s  "
-+msgstr "%-9.9s Lien encap:%s  "
-+
-+#: ../lib/interface.c:693
-+#, c-format
-+msgid "HWaddr %s  "
-+msgstr "HWaddr %s  "
-+
-+#: ../lib/interface.c:696
-+#, c-format
-+msgid "Media:%s"
-+msgstr "Media:%s"
-+
-+#: ../lib/interface.c:698
-+#, c-format
-+msgid "(auto)"
-+msgstr "(auto)"
-+
-+#: ../lib/interface.c:705
-+#, c-format
-+msgid "          %s addr:%s "
-+msgstr "          %s adr:%s "
-+
-+#: ../lib/interface.c:708
-+#, c-format
-+msgid " P-t-P:%s "
-+msgstr " P-t-P:%s "
-+
-+#: ../lib/interface.c:711
-+#, c-format
-+msgid " Bcast:%s "
-+msgstr " Bcast:%s "
-+
-+#: ../lib/interface.c:713
-+#, c-format
-+msgid " Mask:%s\n"
-+msgstr " Masque:%s\n"
-+
-+#: ../lib/interface.c:730
-+#, c-format
-+msgid "          inet6 addr: %s/%d"
-+msgstr "          adr inet6: %s/%d"
-+
-+#: ../lib/interface.c:732
-+#, c-format
-+msgid " Scope:"
-+msgstr " Scope:"
-+
-+#: ../lib/interface.c:735
-+#, c-format
-+msgid "Global"
-+msgstr "Global"
-+
-+#: ../lib/interface.c:738
-+#, c-format
-+msgid "Link"
-+msgstr "Lien"
-+
-+#: ../lib/interface.c:741
-+#, c-format
-+msgid "Site"
-+msgstr "Site"
-+
-+#: ../lib/interface.c:744
-+#, c-format
-+msgid "Compat"
-+msgstr "Compat"
-+
-+#: ../lib/interface.c:747
-+#, c-format
-+msgid "Host"
-+msgstr "Hôte"
-+
-+#: ../lib/interface.c:750
-+#, c-format
-+msgid "Unknown"
-+msgstr "Inconnu"
-+
-+#: ../lib/interface.c:765
-+#, c-format
-+msgid "          IPX/Ethernet II addr:%s\n"
-+msgstr "          adr IPX/Ethernet II:%s\n"
-+
-+#: ../lib/interface.c:768
-+#, c-format
-+msgid "          IPX/Ethernet SNAP addr:%s\n"
-+msgstr "          adr IPX/Ethernet SNAP:%s\n"
-+
-+#: ../lib/interface.c:771
-+#, c-format
-+msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+msgstr "          adr IPX/Ethernet 802.2:%s\n"
-+
-+#: ../lib/interface.c:774
-+#, c-format
-+msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+msgstr "          adr IPX/Ethernet 802.3:%s\n"
-+
-+#: ../lib/interface.c:784
-+#, c-format
-+msgid "          EtherTalk Phase 2 addr:%s\n"
-+msgstr "          adr EtherTalk Phase 2:%s\n"
-+
-+#: ../lib/interface.c:793
-+#, c-format
-+msgid "          econet addr:%s\n"
-+msgstr "          adr econet:%s\n"
-+
-+#: ../lib/interface.c:800
-+#, c-format
-+msgid "[NO FLAGS] "
-+msgstr "[PAS INDICATEURS] "
-+
-+#: ../lib/interface.c:802
-+#, c-format
-+msgid "UP "
-+msgstr "UP "
-+
-+#: ../lib/interface.c:804
-+#, c-format
-+msgid "BROADCAST "
-+msgstr "BROADCAST "
-+
-+#: ../lib/interface.c:806
-+#, c-format
-+msgid "DEBUG "
-+msgstr "DEBUG "
-+
-+#: ../lib/interface.c:808
-+#, c-format
-+msgid "LOOPBACK "
-+msgstr "LOOPBACK "
-+
-+#: ../lib/interface.c:810
-+#, c-format
-+msgid "POINTOPOINT "
-+msgstr "POINTOPOINT "
-+
-+#: ../lib/interface.c:812
-+#, c-format
-+msgid "NOTRAILERS "
-+msgstr "NOTRAILERS "
-+
-+#: ../lib/interface.c:814
-+#, c-format
-+msgid "RUNNING "
-+msgstr "RUNNING "
-+
-+#: ../lib/interface.c:816
-+#, c-format
-+msgid "NOARP "
-+msgstr "NOARP "
-+
-+#: ../lib/interface.c:818
-+#, c-format
-+msgid "PROMISC "
-+msgstr "PROMISC "
-+
-+#: ../lib/interface.c:820
-+#, c-format
-+msgid "ALLMULTI "
-+msgstr "ALLMULTI "
-+
-+#: ../lib/interface.c:822
-+#, c-format
-+msgid "SLAVE "
-+msgstr "SLAVE "
-+
-+#: ../lib/interface.c:824
-+#, c-format
-+msgid "MASTER "
-+msgstr "MASTER "
-+
-+#: ../lib/interface.c:826
-+#, c-format
-+msgid "MULTICAST "
-+msgstr "MULTICAST "
-+
-+#: ../lib/interface.c:829
-+#, c-format
-+msgid "DYNAMIC "
-+msgstr "DYNAMIC "
-+
-+#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+#: ../lib/interface.c:832
-+#, c-format
-+msgid " MTU:%d  Metric:%d"
-+msgstr " MTU:%d  Metric:%d"
-+
-+#: ../lib/interface.c:836
-+#, c-format
-+msgid "  Outfill:%d  Keepalive:%d"
-+msgstr "  Outfill:%d  Keepalive:%d"
-+
-+#: ../lib/interface.c:850
-+#, fuzzy, c-format
-+msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgstr "Paquets Reçus:%lu erreurs:%lu jetés:%lu débordements:%lu trames:%lu\n"
-+
-+#: ../lib/interface.c:855
-+#, c-format
-+msgid "             compressed:%lu\n"
-+msgstr "             compressés:%lu\n"
-+
-+#: ../lib/interface.c:895
-+#, fuzzy, c-format
-+msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgstr "Paquets transmis:%lu erreurs:%lu jetés:%lu débordements:%lu carrier:%lu\n"
-+
-+#: ../lib/interface.c:899
-+#, c-format
-+msgid "          collisions:%lu "
-+msgstr "          collisions:%lu "
-+
-+#: ../lib/interface.c:901
-+#, c-format
-+msgid "compressed:%lu "
-+msgstr "compressés:%lu "
-+
-+#: ../lib/interface.c:903
-+#, c-format
-+msgid "txqueuelen:%d "
-+msgstr "lg file transmission:%d "
-+
-+#: ../lib/interface.c:905
-+#, c-format
-+msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+msgstr ""
-+
-+#: ../lib/interface.c:916
-+#, c-format
-+msgid "Interrupt:%d "
-+msgstr "Interruption:%d "
-+
-+#. Only print devices using it for
-+#. I/O maps
-+#: ../lib/interface.c:919
-+#, c-format
-+msgid "Base address:0x%x "
-+msgstr "Adresse de base:0x%x "
-+
-+#: ../lib/interface.c:921
-+#, c-format
-+msgid "Memory:%lx-%lx "
-+msgstr "Mémoire:%lx-%lx "
-+
-+#: ../lib/interface.c:924
-+#, c-format
-+msgid "DMA chan:%x "
-+msgstr "Canal DMA:%x "
-+
-+#: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr "Pas de famille d'adresses utilisable trouvée.\n"
- 
-@@ -2399,29 +2955,32 @@
- msgid "ip: argument is wrong: %s\n"
- msgstr "ip: argument incorrect: %s\n"
- 
--#: ../ipmaddr.c:56
-+#: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr "Syntaxe: ipmaddr [ add | del ] MULTIADR dev CHAINE\n"
- 
--#: ../ipmaddr.c:57
-+#: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr "       ipmaddr show [ dev CHAINE ] [ ipv4 | ipv6 | link | all ]\n"
- 
--#: ../ipmaddr.c:58
-+#: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr ""
- 
--#: ../ipmaddr.c:258
-+#: ../ipmaddr.c:263
- #, c-format
- msgid "family %d "
- msgstr ""
- 
--#: ../ipmaddr.c:267
-+#: ../ipmaddr.c:272
- #, c-format
- msgid " users %d"
- msgstr ""
- 
--#: ../ipmaddr.c:353
-+#: ../ipmaddr.c:358
- msgid "Cannot create socket"
- msgstr "Ne peut créer une socket"
- 
-@@ -2436,6 +2995,7 @@
- msgstr ""
- 
- #: ../slattach.c:192
-+#, fuzzy, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr "slattach: tty_lock: (%s): %s\n"
- 
-@@ -2454,59 +3014,88 @@
- msgid "slattach: tty_hangup(RAISE): %s\n"
- msgstr "slattach: tty_hangup(RAISE): %s\n"
- 
--#: ../slattach.c:486
-+#: ../slattach.c:468
-+#, fuzzy, c-format
-+msgid "slattach: tty name too long\n"
-+msgstr "%s: nom trop long\n"
-+
-+#: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr "slattach: tty_open: ne peut obtenir l'état courant !\n"
- 
--#: ../slattach.c:493
-+#: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
- msgstr ""
- "slattach: tty_open: ne peut obtenir la discipline de ligne actuelle !\n"
- 
--#: ../slattach.c:501
-+#: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr "slattach: tty_open: ne peut activer le mode RAW !\n"
- 
--#: ../slattach.c:508
-+#: ../slattach.c:520
- #, c-format
- msgid "slattach: tty_open: cannot set %s bps!\n"
- msgstr "slattach: tty_open: ne peut passer à %s bps!\n"
- 
--#: ../slattach.c:518
-+#: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr "slattach: tty_open: ne peut activer le mode 8N1 !\n"
- 
--#: ../slattach.c:686
-+#: ../slattach.c:672
-+#, c-format
-+msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+msgstr ""
-+
-+#: ../slattach.c:704
- #, c-format
- msgid "%s started"
- msgstr ""
- 
--#: ../slattach.c:687
-+#: ../slattach.c:705
- #, c-format
- msgid " on %s"
- msgstr ""
- 
--#: ../slattach.c:688
-+#: ../slattach.c:706
- #, fuzzy, c-format
- msgid " interface %s\n"
- msgstr "%s: interface inconnue: %s\n"
- 
- #~ msgid ""
--#~ "   This comand can get or set the hostname or the NIS domainname. You can\n"
--#~ msgstr ""
--#~ "   Cette commande ne peut obtenir ou définir le nom d'hôte ou le domaine "
--#~ "NIS. Vous pouvez\n"
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+#~ "<-''-\n"
-+#~ msgstr "  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [netmask <nm>] pub  <-''-\n"
-+
-+#~ msgid "%s: unknown interface: %s\n"
-+#~ msgstr "%s: interface inconnue: %s\n"
-+
-+#~ msgid "address mask replies"
-+#~ msgstr "réponses de masque d'adresses"
-+
-+#~ msgid "unknown title %s\n"
-+#~ msgstr "titre inconnu %s\n"
-+
-+#~ msgid "Routing table for `ddp' not yet supported.\n"
-+#~ msgstr "Table de routage pour `ddp' pas encore supporté.\n"
-+
-+#~ msgid ""
-+#~ "   This comand can get or set the hostname or the NIS domainname. You "
-+#~ "can\n"
-+#~ msgstr "   Cette commande ne peut obtenir ou définir le nom d'hôte ou le domaine NIS. Vous pouvez\n"
- 
- #~ msgid ""
- #~ "   also get the DNS domain or the FQDN (fully qualified domain name).\n"
- #~ msgstr ""
--#~ "   aussi obtenir le domaine DNS ou le FQDN (fully qualified domain name).\n"
-+#~ "   aussi obtenir le domaine DNS ou le FQDN (fully qualified domain "
-+#~ "name).\n"
- 
- #~ msgid ""
- #~ "   Unless you are using bind or NIS for host lookups you can change the\n"
--#~ msgstr ""
--#~ "   Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous "
--#~ "pouvez changer le\n"
-+#~ msgstr "   Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez changer le\n"
- 
- #~ msgid ""
- #~ "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
---- net-tools-1.60.orig/po/net-tools.pot
-+++ net-tools-1.60/po/net-tools.pot
-@@ -1,253 +1,275 @@
- # SOME DESCRIPTIVE TITLE.
--# Copyright (C) YEAR Free Software Foundation, Inc.
-+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-+# This file is distributed under the same license as the PACKAGE package.
- # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
- #
- #, fuzzy
- msgid ""
- msgstr ""
- "Project-Id-Version: PACKAGE VERSION\n"
--"POT-Creation-Date: 2001-04-15 15:40+0100\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
- "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
- "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
- "Language-Team: LANGUAGE <LL@li.org>\n"
- "MIME-Version: 1.0\n"
- "Content-Type: text/plain; charset=CHARSET\n"
--"Content-Transfer-Encoding: ENCODING\n"
-+"Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:111 ../arp.c:270
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
- msgstr ""
- 
--#: ../arp.c:208 ../arp.c:222
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
- msgstr ""
- 
--#: ../arp.c:240
-+#: ../arp.c:248
- #, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr ""
- 
--#: ../arp.c:244
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr ""
- 
--#: ../arp.c:253
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
- msgstr ""
- 
--#: ../arp.c:283
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
- msgstr ""
- 
--#: ../arp.c:291
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr ""
- 
--#: ../arp.c:388
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr ""
- 
--#: ../arp.c:404
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr ""
- 
--#: ../arp.c:417
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr ""
- 
--#: ../arp.c:438
-+#: ../arp.c:448
-+#, c-format
- msgid ""
- "Address                  HWtype  HWaddress           Flags Mask            "
- "Iface\n"
- msgstr ""
- 
--#: ../arp.c:468
-+#: ../arp.c:476
-+msgid "<from_interface>"
-+msgstr ""
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
- msgstr ""
- 
--#: ../arp.c:485
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr ""
- 
--#: ../arp.c:491
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr ""
- 
--#: ../arp.c:497
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr ""
- 
--#: ../arp.c:514
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr ""
- 
--#: ../arp.c:593
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr ""
- 
--#: ../arp.c:597
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr ""
- 
--#: ../arp.c:599
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
- msgstr ""
- 
--#: ../arp.c:614
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
- "cache\n"
- msgstr ""
- 
--#: ../arp.c:615
-+#: ../arp.c:627
-+#, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
- msgstr ""
- 
--#: ../arp.c:616
-+#: ../arp.c:628
-+#, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
- msgstr ""
- 
--#: ../arp.c:617
-+#: ../arp.c:629
-+#, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
- msgstr ""
- 
--#: ../arp.c:618
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--
--#: ../arp.c:619
-+#: ../arp.c:630
-+#, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
- msgstr ""
- 
--#: ../arp.c:621
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
- msgstr ""
- 
--#: ../arp.c:622
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr ""
- 
--#: ../arp.c:623
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr ""
- 
--#: ../arp.c:624 ../netstat.c:1490 ../route.c:86
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr ""
- 
--#: ../arp.c:625 ../netstat.c:1491 ../route.c:87
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, c-format
- msgid "        -n, --numeric            don't resolve names\n"
- msgstr ""
- 
--#: ../arp.c:626
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
- msgstr ""
- 
--#: ../arp.c:627
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
- msgstr ""
- 
--#: ../arp.c:628
-+#: ../arp.c:639
-+#, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr ""
- 
--#: ../arp.c:629
-+#: ../arp.c:640
-+#, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
- msgstr ""
- 
--#: ../arp.c:632 ../rarp.c:183
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr ""
- 
--#: ../arp.c:666 ../arp.c:751
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr ""
- 
--#: ../arp.c:670
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr ""
- 
--#: ../arp.c:705
-+#: ../arp.c:716
-+#, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr ""
- 
--#: ../arp.c:715
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr ""
- 
--#: ../arp.c:724
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr ""
- 
--#: ../arp.c:743
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
- msgstr ""
- 
--#: ../arp.c:756
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr ""
- 
--#: ../hostname.c:70
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
- msgstr ""
- 
--#: ../hostname.c:75
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr ""
- 
--#: ../hostname.c:78 ../hostname.c:98 ../hostname.c:117
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr ""
- 
--#: ../hostname.c:90
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
- msgstr ""
- 
--#: ../hostname.c:95
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
- msgstr ""
-@@ -262,103 +284,119 @@
- msgid "%s: you must be root to change the domain name\n"
- msgstr ""
- 
--#: ../hostname.c:132
-+#: ../hostname.c:131
- #, c-format
- msgid "Resolving `%s' ...\n"
- msgstr ""
- 
--#: ../hostname.c:138
-+#: ../hostname.c:137
- #, c-format
- msgid "Result: h_name=`%s'\n"
- msgstr ""
- 
--#: ../hostname.c:143
-+#: ../hostname.c:142
- #, c-format
- msgid "Result: h_aliases=`%s'\n"
- msgstr ""
- 
--#: ../hostname.c:148
-+#: ../hostname.c:147
- #, c-format
- msgid "Result: h_addr_list=`%s'\n"
- msgstr ""
- 
--#: ../hostname.c:210
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
- msgstr ""
- 
--#: ../hostname.c:224
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
- msgstr ""
- 
--#: ../hostname.c:225
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
- msgstr ""
- 
--#: ../hostname.c:227
-+#: ../hostname.c:225
-+#, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
- msgstr ""
- 
--#: ../hostname.c:229
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr ""
- 
--#: ../hostname.c:230
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
- msgstr ""
- 
--#: ../hostname.c:231
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
- msgstr ""
- 
--#: ../hostname.c:232
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- msgstr ""
- 
--#: ../hostname.c:233
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr ""
- 
--#: ../hostname.c:234
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr ""
- 
--#: ../hostname.c:235
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr ""
- 
--#: ../hostname.c:236
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr ""
- 
--#: ../hostname.c:237
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
- msgstr ""
- 
--#: ../hostname.c:238
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
- msgstr ""
- 
--#: ../hostname.c:240
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
- msgstr ""
- 
--#: ../hostname.c:242
-+#: ../hostname.c:240
-+#, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
- msgstr ""
- 
--#: ../hostname.c:244
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -367,587 +405,706 @@
- "   part of the FQDN) in the /etc/hosts file.\n"
- msgstr ""
- 
--#: ../hostname.c:340
-+#: ../hostname.c:338
- #, c-format
- msgid "%s: You can't change the DNS domain name with this command\n"
- msgstr ""
- 
--#: ../hostname.c:341
-+#: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
- msgstr ""
- 
--#: ../hostname.c:342
-+#: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
- msgstr ""
- 
--#: ../hostname.c:359
-+#: ../hostname.c:357
- #, c-format
- msgid "gethostname()=`%s'\n"
- msgstr ""
- 
--#: ../hostname.c:376
-+#: ../hostname.c:374
- #, c-format
- msgid "getdomainname()=`%s'\n"
- msgstr ""
- 
--#: ../hostname.c:391
-+#: ../hostname.c:389
- #, c-format
- msgid "getnodename()=`%s'\n"
- msgstr ""
- 
--#: ../ifconfig.c:108
-+#: ../ifconfig.c:107
-+#, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
- 
--#: ../ifconfig.c:130 ../ifconfig.c:162
-+#: ../ifconfig.c:129 ../ifconfig.c:161
- #, c-format
--msgid "%s: unknown interface: %s\n"
-+msgid "%s: ERROR while getting interface flags: %s\n"
- msgstr ""
- 
--#: ../ifconfig.c:154 ../ifconfig.c:734 ../ifconfig.c:825 ../ifconfig.c:936
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
-+#, c-format
- msgid "No support for INET on this system.\n"
- msgstr ""
- 
--#: ../ifconfig.c:177
-+#: ../ifconfig.c:193
-+#, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:202
-+#, c-format
- msgid ""
- "Usage:\n"
--"  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:204
-+#, c-format
- msgid "  [add <address>[/<prefixlen>]]\n"
- msgstr ""
- 
--#: ../ifconfig.c:180
-+#: ../ifconfig.c:205
-+#, c-format
- msgid "  [del <address>[/<prefixlen>]]\n"
- msgstr ""
- 
--#: ../ifconfig.c:181
-+#: ../ifconfig.c:206
-+#, c-format
- msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
- msgstr ""
- 
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:207
-+#, c-format
- msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:185
-+#: ../ifconfig.c:210
-+#, c-format
- msgid "  [outfill <NN>] [keepalive <NN>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:187
-+#: ../ifconfig.c:212
-+#, c-format
- msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:188
-+#: ../ifconfig.c:213
-+#, c-format
- msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- msgstr ""
- 
--#: ../ifconfig.c:189
-+#: ../ifconfig.c:214
-+#, c-format
- msgid "  [multicast]  [[-]promisc]\n"
- msgstr ""
- 
--#: ../ifconfig.c:190
-+#: ../ifconfig.c:215
-+#, c-format
- msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:192
-+#: ../ifconfig.c:217
-+#, c-format
- msgid "  [txqueuelen <NN>]\n"
- msgstr ""
- 
--#: ../ifconfig.c:195
-+#: ../ifconfig.c:220
-+#, c-format
- msgid "  [[-]dynamic]\n"
- msgstr ""
- 
--#: ../ifconfig.c:197
-+#: ../ifconfig.c:222
-+#, c-format
- msgid ""
- "  [up|down] ...\n"
- "\n"
- msgstr ""
- 
--#: ../ifconfig.c:199
-+#: ../ifconfig.c:224
-+#, c-format
- msgid "  <HW>=Hardware Type.\n"
- msgstr ""
- 
--#: ../ifconfig.c:200
-+#: ../ifconfig.c:225
-+#, c-format
- msgid "  List of possible hardware types:\n"
- msgstr ""
- 
- #. 1 = ARPable
--#: ../ifconfig.c:202
-+#: ../ifconfig.c:227
- #, c-format
- msgid "  <AF>=Address family. Default: %s\n"
- msgstr ""
- 
--#: ../ifconfig.c:203
-+#: ../ifconfig.c:228
-+#, c-format
- msgid "  List of possible address families:\n"
- msgstr ""
- 
--#: ../ifconfig.c:278
-+#: ../ifconfig.c:303
- #, c-format
- msgid "ifconfig: option `%s' not recognised.\n"
- msgstr ""
- 
--#: ../ifconfig.c:280 ../ifconfig.c:925
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
- msgid "ifconfig: `--help' gives usage information.\n"
- msgstr ""
- 
--#: ../ifconfig.c:355
-+#: ../ifconfig.c:380
-+#, c-format
- msgid "Unknown media type.\n"
- msgstr ""
- 
--#: ../ifconfig.c:647
-+#: ../ifconfig.c:417
-+#, c-format
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:429
-+#, c-format
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:441
-+#, c-format
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:465
-+#, c-format
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:523
-+#, c-format
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:652
-+#, c-format
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
-+
-+#: ../ifconfig.c:684
- #, c-format
- msgid "hw address type `%s' has no handler to set address. failed.\n"
- msgstr ""
- 
--#: ../ifconfig.c:656
-+#: ../ifconfig.c:693
- #, c-format
- msgid "%s: invalid %s address.\n"
- msgstr ""
- 
--#: ../ifconfig.c:700 ../ifconfig.c:790 ../ifconfig.c:876
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+#, c-format
- msgid "No support for INET6 on this system.\n"
- msgstr ""
- 
--#: ../ifconfig.c:743 ../ifconfig.c:834
-+#: ../ifconfig.c:780 ../ifconfig.c:871
- #, c-format
- msgid "Interface %s not initialized\n"
- msgstr ""
- 
--#: ../ifconfig.c:755 ../ifconfig.c:845
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, c-format
- msgid "Bad address.\n"
- msgstr ""
- 
--#: ../ifconfig.c:848
-+#: ../ifconfig.c:885
-+#, c-format
- msgid "Address deletion not supported on this system.\n"
- msgstr ""
- 
--#: ../ifconfig.c:920
-+#: ../ifconfig.c:957
-+#, c-format
- msgid "ifconfig: Cannot set address for this protocol family.\n"
- msgstr ""
- 
--#: ../ifconfig.c:946
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr ""
- 
--#: ../ifconfig.c:954
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr ""
- 
--#: ../netstat.c:430
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
- msgstr ""
- 
--#: ../netstat.c:434
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
- msgstr ""
- 
--#: ../netstat.c:441 ../netstat.c:1176 ../netstat.c:1253
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr ""
- 
--#: ../netstat.c:442
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr ""
- 
--#: ../netstat.c:443 ../netstat.c:1255
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr ""
- 
--#: ../netstat.c:444 ../netstat.c:511 ../netstat.c:894 ../netstat.c:1256
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr ""
- 
--#: ../netstat.c:466
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr ""
- 
--#: ../netstat.c:467
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
- msgstr ""
- 
--#: ../netstat.c:477 ../netstat.c:1295
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr ""
- 
--#: ../netstat.c:512
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr ""
- 
--#: ../netstat.c:513
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr ""
- 
--#: ../netstat.c:514
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr ""
- 
--#: ../netstat.c:515
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr ""
- 
--#: ../netstat.c:516
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr ""
- 
--#: ../netstat.c:517
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr ""
- 
--#: ../netstat.c:518
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr ""
- 
--#: ../netstat.c:519
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr ""
- 
--#: ../netstat.c:520
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr ""
- 
--#: ../netstat.c:521
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr ""
- 
--#: ../netstat.c:592
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr ""
- 
--#: ../netstat.c:597 ../netstat.c:635 ../netstat.c:756 ../netstat.c:888
--#: ../netstat.c:1019 ../netstat.c:1024
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr ""
- 
--#: ../netstat.c:610 ../netstat.c:615 ../netstat.c:623 ../netstat.c:630
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr ""
- 
--#: ../netstat.c:673
-+#: ../netstat.c:677
-+#, c-format
- msgid "Active X.25 sockets\n"
- msgstr ""
- 
- #. IMHO, Vr/Vs is not very usefull --SF
--#: ../netstat.c:675
-+#: ../netstat.c:679
-+#, c-format
- msgid ""
--"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  "
--"Recv-Q\n"
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
- msgstr ""
- 
--#: ../netstat.c:752
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr ""
- 
--#: ../netstat.c:793 ../netstat.c:943 ../netstat.c:1062
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:797
-+#: ../netstat.c:804
- #, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:802
-+#: ../netstat.c:809
- #, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:807
-+#: ../netstat.c:814
- #, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:812 ../netstat.c:952 ../netstat.c:1072
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:884
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr ""
- 
--#: ../netstat.c:902 ../netstat.c:1162 ../netstat.c:1195
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr ""
- 
--#: ../netstat.c:948 ../netstat.c:1067
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr ""
- 
--#: ../netstat.c:1033
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr ""
- 
--#: ../netstat.c:1115
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr ""
- 
--#: ../netstat.c:1142
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr ""
- 
--#: ../netstat.c:1146
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr ""
- 
--#: ../netstat.c:1150
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr ""
- 
--#: ../netstat.c:1154
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr ""
- 
--#: ../netstat.c:1158
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
- msgstr ""
- 
--#: ../netstat.c:1167
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr ""
- 
--#: ../netstat.c:1183
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr ""
- 
--#: ../netstat.c:1187
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr ""
- 
--#: ../netstat.c:1191
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr ""
- 
--#: ../netstat.c:1222
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
- msgstr ""
- 
--#: ../netstat.c:1224 ../netstat.c:1735
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr ""
- 
--#: ../netstat.c:1227 ../netstat.c:1738
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr ""
- 
--#: ../netstat.c:1229 ../netstat.c:1740
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr ""
- 
--#: ../netstat.c:1232
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
- msgstr ""
- 
--#: ../netstat.c:1234
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr ""
- 
--#: ../netstat.c:1254
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr ""
- 
--#: ../netstat.c:1257
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr ""
- 
--#: ../netstat.c:1271
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr ""
- 
--#: ../netstat.c:1272
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr ""
- 
--#: ../netstat.c:1315
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr ""
- 
--#: ../netstat.c:1366
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
- "State"
- msgstr ""
- 
--#: ../netstat.c:1368
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr ""
- 
--#: ../netstat.c:1402
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr ""
- 
--#: ../netstat.c:1410
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr ""
- 
--#: ../netstat.c:1448
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
- msgstr ""
- 
--#: ../netstat.c:1452
-+#: ../netstat.c:1465
-+#, c-format
- msgid ""
--"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
- 
--#: ../netstat.c:1456
-+#: ../netstat.c:1469
- msgid "missing interface information"
- msgstr ""
- 
--#: ../netstat.c:1479
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
- 
--#: ../netstat.c:1480
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr ""
- 
--#: ../netstat.c:1481
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- msgstr ""
- 
--#: ../netstat.c:1483
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr ""
- 
--#: ../netstat.c:1484
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr ""
- 
--#: ../netstat.c:1485
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr ""
- 
--#: ../netstat.c:1486
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
- msgstr ""
- 
--#: ../netstat.c:1488
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
- msgstr ""
- 
--#: ../netstat.c:1492
-+#: ../netstat.c:1505
-+#, c-format
- msgid "        --numeric-hosts          don't resolve host names\n"
- msgstr ""
- 
--#: ../netstat.c:1493
-+#: ../netstat.c:1506
-+#, c-format
- msgid "        --numeric-ports          don't resolve port names\n"
- msgstr ""
- 
--#: ../netstat.c:1494
-+#: ../netstat.c:1507
-+#, c-format
- msgid "        --numeric-users          don't resolve user names\n"
- msgstr ""
- 
--#: ../netstat.c:1495
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr ""
- 
--#: ../netstat.c:1496 ../route.c:88
-+#: ../netstat.c:1509 ../route.c:88
-+#, c-format
- msgid "        -e, --extend             display other/more information\n"
- msgstr ""
- 
--#: ../netstat.c:1497
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
- msgstr ""
- 
--#: ../netstat.c:1498
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
- msgstr ""
- 
--#: ../netstat.c:1499
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
- msgstr ""
- 
--#: ../netstat.c:1500
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
- msgstr ""
- 
--#: ../netstat.c:1501
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr ""
- 
--#: ../netstat.c:1502 ../route.c:89
-+#: ../netstat.c:1515 ../route.c:89
-+#, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
- msgstr ""
- 
--#: ../netstat.c:1503 ../route.c:90
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
- msgstr ""
- 
--#: ../netstat.c:1505
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
- 
--#: ../netstat.c:1506 ../route.c:92
-+#: ../netstat.c:1519
- #, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr ""
- 
--#: ../netstat.c:1507 ../route.c:93
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
- msgstr ""
- 
--#: ../netstat.c:1732
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr ""
- 
--#: ../netstat.c:1742
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- 
--#: ../netstat.c:1744
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr ""
- 
--#: ../netstat.c:1747
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr ""
- 
--#: ../netstat.c:1777
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
- msgstr ""
- 
--#: ../netstat.c:1778
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr ""
- 
-@@ -986,23 +1143,28 @@
- msgstr ""
- 
- #: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
- msgstr ""
- 
- #: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
- msgstr ""
- 
- #: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
- msgstr ""
- 
- #: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
- msgstr ""
- 
- #: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
-@@ -1019,38 +1181,50 @@
- msgstr ""
- 
- #: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
- 
- #: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
- msgstr ""
- 
- #: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
- msgstr ""
- 
- #: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
- "\n"
- msgstr ""
- 
-+#: ../route.c:92
-+#, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr ""
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr ""
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr ""
- 
- #: ../plipconfig.c:68
-+#, c-format
- msgid "       plipconfig -V | --version\n"
- msgstr ""
- 
-@@ -1060,61 +1234,75 @@
- msgstr ""
- 
- #: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr ""
- 
- #: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
- msgstr ""
- 
- #: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr ""
- 
- #: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
- msgstr ""
- 
- #: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
- msgstr ""
- 
- #: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr ""
- 
- #: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr ""
- 
- #: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr ""
- 
- #: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr ""
- 
- #: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr ""
- 
- #: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr ""
- 
- #: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr ""
- 
- #: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr ""
- 
- #: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr ""
- 
-@@ -1128,22 +1316,27 @@
- msgstr ""
- 
- #: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr ""
- 
- #: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr ""
- 
- #: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr ""
- 
- #: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr ""
- 
- #: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
- msgstr ""
- 
-@@ -1153,10 +1346,12 @@
- msgstr ""
- 
- #: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr ""
- 
- #: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr ""
- 
-@@ -1563,12 +1758,12 @@
- 
- #: ../statistics.c:178
- #, c-format
--msgid "%u packets directly received from backlog"
-+msgid "%u of bytes directly received from backlog"
- msgstr ""
- 
- #: ../statistics.c:180
- #, c-format
--msgid "%u packets directly received from prequeue"
-+msgid "%u of bytes directly received from prequeue"
- msgstr ""
- 
- #: ../statistics.c:182
-@@ -1578,7 +1773,7 @@
- 
- #: ../statistics.c:183
- #, c-format
--msgid "%u packets header predicted"
-+msgid "%u packet headers predicted"
- msgstr ""
- 
- #: ../statistics.c:184
-@@ -1591,19 +1786,209 @@
- msgid "Ran %u times out of system memory during packet sending"
- msgstr ""
- 
--#: ../statistics.c:253
-+#: ../statistics.c:188
-+#, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr ""
-+
-+#: ../statistics.c:189
-+#, c-format
-+msgid "%u predicted acknowledgments"
-+msgstr ""
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
-+
-+#: ../statistics.c:192
-+#, c-format
-+msgid "%u bad SACKs received"
-+msgstr ""
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:197
-+#, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr ""
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr ""
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, c-format
-+msgid "%u retransmits lost"
-+msgstr ""
-+
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, c-format
-+msgid "%u fast retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr ""
-+
-+#: ../statistics.c:210
-+#, c-format
-+msgid "%u sack retransmits failed"
-+msgstr ""
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr ""
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, c-format
-+msgid "%u DSACKs received"
-+msgstr ""
-+
-+#: ../statistics.c:216
-+#, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr ""
-+
-+#: ../statistics.c:217
-+#, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr ""
-+
-+#: ../statistics.c:218
-+#, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr ""
-+
-+#: ../statistics.c:219
-+#, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr ""
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr ""
-+
-+#: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr ""
- 
--#: ../statistics.c:253
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr ""
- 
--#: ../statistics.c:336
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr ""
- 
--#: ../statistics.c:349
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr ""
- 
-@@ -1617,7 +2002,7 @@
- msgid "Cannot change line discipline to `%s'.\n"
- msgstr ""
- 
--#: ../lib/af.c:153 ../lib/hw.c:156
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr ""
- 
-@@ -1633,11 +2018,11 @@
- msgid "IPv6"
- msgstr ""
- 
--#: ../lib/af.c:164 ../lib/hw.c:177
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr ""
- 
--#: ../lib/af.c:167 ../lib/hw.c:183
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr ""
- 
-@@ -1649,7 +2034,7 @@
- msgid "Appletalk DDP"
- msgstr ""
- 
--#: ../lib/af.c:176 ../lib/hw.c:218
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr ""
- 
-@@ -1657,19 +2042,21 @@
- msgid "CCITT X.25"
- msgstr ""
- 
--#: ../lib/af.c:182 ../lib/hw.c:180
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr ""
- 
--#: ../lib/af.c:185 ../lib/hw.c:168
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr ""
- 
- #: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr ""
- 
- #: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr ""
- 
-@@ -1694,6 +2081,7 @@
- msgstr ""
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
- msgstr ""
- 
-@@ -1712,22 +2100,21 @@
- msgstr ""
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr ""
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr ""
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr ""
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1783,90 +2170,94 @@
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr ""
- 
--#: ../lib/hw.c:155
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr ""
- 
--#: ../lib/hw.c:158
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr ""
- 
--#: ../lib/hw.c:159
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr ""
- 
--#: ../lib/hw.c:160
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr ""
- 
--#: ../lib/hw.c:161
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr ""
- 
--#: ../lib/hw.c:162
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr ""
- 
--#: ../lib/hw.c:165
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr ""
- 
--#: ../lib/hw.c:171
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr ""
- 
--#: ../lib/hw.c:174
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr ""
- 
--#: ../lib/hw.c:186
-+#: ../lib/hw.c:191
- msgid "generic X.25"
- msgstr ""
- 
--#: ../lib/hw.c:189
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr ""
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
- msgstr ""
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr ""
- 
--#: ../lib/hw.c:196
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr ""
- 
--#: ../lib/hw.c:199
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr ""
- 
--#: ../lib/hw.c:202
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr ""
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr ""
- 
--#: ../lib/hw.c:206
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr ""
- 
--#: ../lib/hw.c:209
-+#: ../lib/hw.c:214
- msgid "IrLAP"
- msgstr ""
- 
--#: ../lib/hw.c:212
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr ""
- 
--#: ../lib/hw.c:214
-+#: ../lib/hw.c:219
- msgid "16/4 Mbps Token Ring (New)"
- msgstr ""
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
-@@ -1877,131 +2268,157 @@
- msgstr ""
- 
- #: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
- msgstr ""
- 
- #: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
- msgstr ""
- 
- #: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr ""
- 
- #: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
- msgstr ""
- 
- #: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
- msgstr ""
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr ""
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr ""
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr ""
- 
- #: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
- msgstr ""
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
- msgstr ""
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr ""
- 
-@@ -2011,14 +2428,17 @@
- msgstr ""
- 
- #: ../lib/inet_sr.c:174
-+#, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr ""
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr ""
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr ""
- 
-@@ -2033,73 +2453,90 @@
- msgstr ""
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr ""
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
- msgstr ""
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
- msgstr ""
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
- msgstr ""
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
- msgstr ""
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
- msgstr ""
- 
- #: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr ""
- 
- #: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr ""
- 
- #: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
- msgstr ""
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr ""
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
- msgstr ""
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
- msgstr ""
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr ""
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
- msgstr ""
- 
-@@ -2108,287 +2545,314 @@
- msgstr ""
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr ""
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
- msgstr ""
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr ""
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr ""
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr ""
- 
--#: ../lib/interface.c:164
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
- msgstr ""
- 
--#: ../lib/interface.c:316
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr ""
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:556
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr ""
- 
--#: ../lib/interface.c:560
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
- msgstr ""
- 
--#: ../lib/interface.c:593
-+#: ../lib/interface.c:608
- msgid "     - no statistics available -"
- msgstr ""
- 
--#: ../lib/interface.c:597
-+#: ../lib/interface.c:612
-+#, c-format
- msgid "[NO FLAGS]"
- msgstr ""
- 
--#: ../lib/interface.c:673
-+#: ../lib/interface.c:688
- #, c-format
- msgid "%-9.9s Link encap:%s  "
- msgstr ""
- 
--#: ../lib/interface.c:678
-+#: ../lib/interface.c:693
- #, c-format
- msgid "HWaddr %s  "
- msgstr ""
- 
--#: ../lib/interface.c:681
-+#: ../lib/interface.c:696
- #, c-format
- msgid "Media:%s"
- msgstr ""
- 
--#: ../lib/interface.c:683
-+#: ../lib/interface.c:698
-+#, c-format
- msgid "(auto)"
- msgstr ""
- 
--#: ../lib/interface.c:690
-+#: ../lib/interface.c:705
- #, c-format
- msgid "          %s addr:%s "
- msgstr ""
- 
--#: ../lib/interface.c:693
-+#: ../lib/interface.c:708
- #, c-format
- msgid " P-t-P:%s "
- msgstr ""
- 
--#: ../lib/interface.c:696
-+#: ../lib/interface.c:711
- #, c-format
- msgid " Bcast:%s "
- msgstr ""
- 
--#: ../lib/interface.c:698
-+#: ../lib/interface.c:713
- #, c-format
- msgid " Mask:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:715
-+#: ../lib/interface.c:730
- #, c-format
- msgid "          inet6 addr: %s/%d"
- msgstr ""
- 
--#: ../lib/interface.c:717
-+#: ../lib/interface.c:732
-+#, c-format
- msgid " Scope:"
- msgstr ""
- 
--#: ../lib/interface.c:720
-+#: ../lib/interface.c:735
-+#, c-format
- msgid "Global"
- msgstr ""
- 
--#: ../lib/interface.c:723
-+#: ../lib/interface.c:738
-+#, c-format
- msgid "Link"
- msgstr ""
- 
--#: ../lib/interface.c:726
-+#: ../lib/interface.c:741
-+#, c-format
- msgid "Site"
- msgstr ""
- 
--#: ../lib/interface.c:729
-+#: ../lib/interface.c:744
-+#, c-format
- msgid "Compat"
- msgstr ""
- 
--#: ../lib/interface.c:732
-+#: ../lib/interface.c:747
-+#, c-format
- msgid "Host"
- msgstr ""
- 
--#: ../lib/interface.c:735
-+#: ../lib/interface.c:750
-+#, c-format
- msgid "Unknown"
- msgstr ""
- 
--#: ../lib/interface.c:750
-+#: ../lib/interface.c:765
- #, c-format
- msgid "          IPX/Ethernet II addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:753
-+#: ../lib/interface.c:768
- #, c-format
- msgid "          IPX/Ethernet SNAP addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:756
-+#: ../lib/interface.c:771
- #, c-format
- msgid "          IPX/Ethernet 802.2 addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:759
-+#: ../lib/interface.c:774
- #, c-format
- msgid "          IPX/Ethernet 802.3 addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:769
-+#: ../lib/interface.c:784
- #, c-format
- msgid "          EtherTalk Phase 2 addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:778
-+#: ../lib/interface.c:793
- #, c-format
- msgid "          econet addr:%s\n"
- msgstr ""
- 
--#: ../lib/interface.c:785
-+#: ../lib/interface.c:800
-+#, c-format
- msgid "[NO FLAGS] "
- msgstr ""
- 
--#: ../lib/interface.c:787
-+#: ../lib/interface.c:802
-+#, c-format
- msgid "UP "
- msgstr ""
- 
--#: ../lib/interface.c:789
-+#: ../lib/interface.c:804
-+#, c-format
- msgid "BROADCAST "
- msgstr ""
- 
--#: ../lib/interface.c:791
-+#: ../lib/interface.c:806
-+#, c-format
- msgid "DEBUG "
- msgstr ""
- 
--#: ../lib/interface.c:793
-+#: ../lib/interface.c:808
-+#, c-format
- msgid "LOOPBACK "
- msgstr ""
- 
--#: ../lib/interface.c:795
-+#: ../lib/interface.c:810
-+#, c-format
- msgid "POINTOPOINT "
- msgstr ""
- 
--#: ../lib/interface.c:797
-+#: ../lib/interface.c:812
-+#, c-format
- msgid "NOTRAILERS "
- msgstr ""
- 
--#: ../lib/interface.c:799
-+#: ../lib/interface.c:814
-+#, c-format
- msgid "RUNNING "
- msgstr ""
- 
--#: ../lib/interface.c:801
-+#: ../lib/interface.c:816
-+#, c-format
- msgid "NOARP "
- msgstr ""
- 
--#: ../lib/interface.c:803
-+#: ../lib/interface.c:818
-+#, c-format
- msgid "PROMISC "
- msgstr ""
- 
--#: ../lib/interface.c:805
-+#: ../lib/interface.c:820
-+#, c-format
- msgid "ALLMULTI "
- msgstr ""
- 
--#: ../lib/interface.c:807
-+#: ../lib/interface.c:822
-+#, c-format
- msgid "SLAVE "
- msgstr ""
- 
--#: ../lib/interface.c:809
-+#: ../lib/interface.c:824
-+#, c-format
- msgid "MASTER "
- msgstr ""
- 
--#: ../lib/interface.c:811
-+#: ../lib/interface.c:826
-+#, c-format
- msgid "MULTICAST "
- msgstr ""
- 
--#: ../lib/interface.c:814
-+#: ../lib/interface.c:829
-+#, c-format
- msgid "DYNAMIC "
- msgstr ""
- 
- #. DONT FORGET TO ADD THE FLAGS IN ife_print_short
--#: ../lib/interface.c:817
-+#: ../lib/interface.c:832
- #, c-format
- msgid " MTU:%d  Metric:%d"
- msgstr ""
- 
--#: ../lib/interface.c:821
-+#: ../lib/interface.c:836
- #, c-format
- msgid "  Outfill:%d  Keepalive:%d"
- msgstr ""
- 
--#: ../lib/interface.c:835
-+#: ../lib/interface.c:850
- #, c-format
- msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
- msgstr ""
- 
--#: ../lib/interface.c:840
-+#: ../lib/interface.c:855
- #, c-format
- msgid "             compressed:%lu\n"
- msgstr ""
- 
--#: ../lib/interface.c:852
-+#: ../lib/interface.c:895
- #, c-format
- msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
- msgstr ""
- 
--#: ../lib/interface.c:856
-+#: ../lib/interface.c:899
- #, c-format
- msgid "          collisions:%lu "
- msgstr ""
- 
--#: ../lib/interface.c:858
-+#: ../lib/interface.c:901
- #, c-format
- msgid "compressed:%lu "
- msgstr ""
- 
--#: ../lib/interface.c:860
-+#: ../lib/interface.c:903
- #, c-format
- msgid "txqueuelen:%d "
- msgstr ""
- 
--#: ../lib/interface.c:862
-+#: ../lib/interface.c:905
- #, c-format
- msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
- msgstr ""
- 
--#: ../lib/interface.c:873
-+#: ../lib/interface.c:916
- #, c-format
- msgid "Interrupt:%d "
- msgstr ""
- 
- #. Only print devices using it for
- #. I/O maps
--#: ../lib/interface.c:876
-+#: ../lib/interface.c:919
- #, c-format
- msgid "Base address:0x%x "
- msgstr ""
- 
--#: ../lib/interface.c:878
-+#: ../lib/interface.c:921
- #, c-format
- msgid "Memory:%lx-%lx "
- msgstr ""
- 
--#: ../lib/interface.c:881
-+#: ../lib/interface.c:924
- #, c-format
- msgid "DMA chan:%x "
- msgstr ""
- 
- #: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr ""
- 
-@@ -2413,14 +2877,17 @@
- msgstr ""
- 
- #: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr ""
- 
- #: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr ""
- 
- #: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr ""
- 
-@@ -2449,6 +2916,7 @@
- msgstr ""
- 
- #: ../slattach.c:192
-+#, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr ""
- 
-@@ -2468,18 +2936,22 @@
- msgstr ""
- 
- #: ../slattach.c:468
-+#, c-format
- msgid "slattach: tty name too long\n"
- msgstr ""
- 
- #: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr ""
- 
- #: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
- msgstr ""
- 
- #: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr ""
- 
-@@ -2489,6 +2961,7 @@
- msgstr ""
- 
- #: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr ""
- 
---- net-tools-1.60.orig/po/cs.po
-+++ net-tools-1.60/po/cs.po
-@@ -5,7 +5,8 @@
- msgid ""
- msgstr ""
- "Project-Id-Version: net-tools-1.51\n"
--"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
- "PO-Revision-Date: 1999-08-29 23:20+0200\n"
- "Last-Translator: Jiøí Pavlovský <pavlovsk@ff.cuni.cz>\n"
- "Language-Team: Czech <cs@li.org>\n"
-@@ -13,96 +14,110 @@
- "Content-Type: text/plain; charset=iso-8859-2\n"
- "Content-Transfer-Encoding: 8bit\n"
- 
--#: ../arp.c:110 ../arp.c:269
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
- msgid "arp: need host name\n"
- msgstr "arp: je tøeba jméno poèítaèe\n"
- 
--#: ../arp.c:207 ../arp.c:221
-+#: ../arp.c:215 ../arp.c:230
- #, c-format
- msgid "No ARP entry for %s\n"
- msgstr "Pro %s neexistuje ARP polo¾ka\n"
- 
--#: ../arp.c:239
-+#: ../arp.c:248
- #, c-format
- msgid "arp: cant get HW-Address for `%s': %s.\n"
- msgstr "arp: HW adresu `%s' nelze zjistit: %s\n"
- 
--#: ../arp.c:243
-+#: ../arp.c:252
-+#, c-format
- msgid "arp: protocol type mismatch.\n"
- msgstr "arp: chybnì zadaný typ protokolu\n"
- 
--#: ../arp.c:252
-+#: ../arp.c:261
- #, c-format
- msgid "arp: device `%s' has HW address %s `%s'.\n"
- msgstr "arp: zaøízení `%s' má Hw adresu %s `%s'.\n"
- 
--#: ../arp.c:282
-+#: ../arp.c:293
-+#, c-format
- msgid "arp: need hardware address\n"
- msgstr "arp: je tøeba hardwarová adresa\n"
- 
--#: ../arp.c:290
-+#: ../arp.c:301
-+#, c-format
- msgid "arp: invalid hardware address\n"
- msgstr "arp: nesprávná hardwarová adresa\n"
- 
--#: ../arp.c:387
-+#: ../arp.c:398
- #, c-format
- msgid "arp: cannot open etherfile %s !\n"
- msgstr "arp: databázi ethernetových adres %s nelze otevøít!\n"
- 
--#: ../arp.c:403
-+#: ../arp.c:414
- #, c-format
- msgid "arp: format error on line %u of etherfile %s !\n"
- msgstr "arp: syntaktická chyba na øádku %u databáze ethernetových adres %s!\n"
- 
--#: ../arp.c:416
-+#: ../arp.c:427
- #, c-format
- msgid "arp: cannot set entry on line %u of etherfile %s !\n"
- msgstr ""
- "arp: polo¾ku na øádku %u databáze ethernetových adres %s nelze nastavit!\n"
- 
--#: ../arp.c:437
--msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-+#: ../arp.c:448
-+#, fuzzy, c-format
-+msgid ""
-+"Address                  HWtype  HWaddress           Flags Mask            "
-+"Iface\n"
- msgstr "Adresa\t\t\t HWtyp\t HWadresa\t     Pøíz  Maska\t\t   Rozhraní\n"
- 
--#: ../arp.c:467
-+#: ../arp.c:476
-+#, fuzzy
-+msgid "<from_interface>"
-+msgstr " rozhraní %s\n"
-+
-+#: ../arp.c:478
- msgid "(incomplete)"
- msgstr "(nekompletní)"
- 
--#: ../arp.c:484
-+#: ../arp.c:495
- #, c-format
- msgid "%s (%s) at "
- msgstr "%s (%s) na "
- 
--#: ../arp.c:490
-+#: ../arp.c:501
-+#, c-format
- msgid "<incomplete> "
- msgstr "<nekompletní>"
- 
--#: ../arp.c:496
-+#: ../arp.c:507
- #, c-format
- msgid "netmask %s "
- msgstr "sí»ová maska %s "
- 
--#: ../arp.c:513
-+#: ../arp.c:524
- #, c-format
- msgid "on %s\n"
- msgstr "na %s\n"
- 
--#: ../arp.c:592
-+#: ../arp.c:605
- #, c-format
- msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
- msgstr "Polo¾ky: %d\tVynecháno: %d\tNalezeno: %d\n"
- 
--#: ../arp.c:596
-+#: ../arp.c:609
- #, c-format
- msgid "%s (%s) -- no entry\n"
- msgstr "%s (%s) -- ¾ádná polo¾ka\n"
- 
--#: ../arp.c:598
-+#: ../arp.c:611
- #, c-format
- msgid "arp: in %d entries no match found.\n"
- msgstr "arp: ¾ádná z polo¾ek (%d) nevyhovuje.\n"
- 
--#: ../arp.c:613
-+#: ../arp.c:626
-+#, c-format
- msgid ""
- "Usage:\n"
- "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-@@ -112,49 +127,46 @@
- "  arp [-vn]  [<HW>] [-i <if> [-a] [<poèítaè>]             <-Zobrazí ARP "
- "cache\n"
- 
--#: ../arp.c:614
-+#: ../arp.c:627
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
- "entry\n"
- msgstr ""
- "  arp [-v]          [-i <if>] -d <poèítaè> [pub][nopub]   <-Sma¾e polo¾ku "
- "ARP\n"
- 
--#: ../arp.c:615
--#, fuzzy
-+#: ../arp.c:628
-+#, fuzzy, c-format
- msgid ""
--"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
- "file\n"
- msgstr ""
- "  arp [-vnD] [<HW>] [-i <if>] -f <soubor>                 <-Pøidá polo¾ku "
- "ze\n"
- "                                                          souboru\n"
- 
--#: ../arp.c:616
-+#: ../arp.c:629
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
- "entry\n"
- msgstr ""
- "  arp [-v]   [<HW> [-i <if> -s   <poèítaè> <hwadr> [temp][nopub] <-Pøidá "
- "polo¾ku\n"
- 
--#: ../arp.c:617
--msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
--"<-''-\n"
--msgstr ""
--"  arp [-v]   [<HW>] [-i <if>] -s <soubor> <hwadr> [sí»mask <èís>]  <-''-\n"
--
--#: ../arp.c:618
-+#: ../arp.c:630
-+#, fuzzy, c-format
- msgid ""
--"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
- "<-''-\n"
- "\n"
- msgstr ""
- "  arp [-v]   [<HW> [-i <if> -Ds  <poèítaè> <if> [sí»mask <èís>] pub      "
- "<-''-\n"
- 
--#: ../arp.c:620
-+#: ../arp.c:632
-+#, c-format
- msgid ""
- "        -a                       display (all) hosts in alternative (BSD) "
- "style\n"
-@@ -162,126 +174,134 @@
- "        -a                       zobrazí jmna v¹ech poèítaèù alternativním\n"
- "                                 (BSD) zpùsobem\n"
- 
--#: ../arp.c:621
-+#: ../arp.c:633
-+#, c-format
- msgid "        -s, --set                set a new ARP entry\n"
- msgstr "        -s, --set                nastaví novou ARP polo¾ku\n"
- 
--#: ../arp.c:622
-+#: ../arp.c:634
-+#, c-format
- msgid "        -d, --delete             delete a specified entry\n"
- msgstr "        -d, --delete             sma¾e zadanou ARP polo¾ku\n"
- 
--#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
- msgid "        -v, --verbose            be verbose\n"
- msgstr ""
- "        -v, --verbose            bude vypisovat podrobné zprávy\n"
- "                                 o èinnosti\n"
- 
--#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
--msgid "        -n, --numeric            dont resolve names\n"
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, fuzzy, c-format
-+msgid "        -n, --numeric            don't resolve names\n"
- msgstr ""
- "        -n, --numeric            nebude pøevádìt èíselné adresy\n"
- "                                 na kanonická jména\n"
- 
--#: ../arp.c:625
-+#: ../arp.c:637
-+#, c-format
- msgid ""
- "        -i, --device             specify network interface (e.g. eth0)\n"
- msgstr "        -i, --device             zadává sí»ové rozhraní (napø. eth0)\n"
- 
--#: ../arp.c:626
-+#: ../arp.c:638
-+#, c-format
- msgid "        -D, --use-device         read <hwaddr> from given device\n"
- msgstr "        -D, --use-device         ète <hwadr> ze zadaného zaøízení\n"
- 
--#: ../arp.c:627
--#, fuzzy
-+#: ../arp.c:639
-+#, fuzzy, c-format
- msgid "        -A, -p, --protocol       specify protocol family\n"
- msgstr "         -r, --route              vypí¹e smìrovací tabulku\n"
- 
--#: ../arp.c:628
--#, fuzzy
-+#: ../arp.c:640
-+#, fuzzy, c-format
- msgid ""
--"        -f, --file               read new entries from file or from "
--"/etc/ethers\n"
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
- "\n"
- msgstr ""
- "        -f, --file               ète nové polo¾ky ze souboru\n"
- "\n"
- 
--#: ../arp.c:630 ../rarp.c:181
-+#: ../arp.c:642 ../rarp.c:182
- #, c-format
- msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
- msgstr ""
- "  <HW>=Pou¾ijte '-H <hw> pro zadání hardwarového typu adresy.\n"
- "  Implicitnì: %s\n"
- 
--#: ../arp.c:631 ../rarp.c:182
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
- msgid "  List of possible hardware types (which support ARP):\n"
- msgstr "  Seznam mo¾ných hardwarových typù (podporujících ARP):\n"
- 
--#: ../arp.c:664
-+#: ../arp.c:677 ../arp.c:762
- #, c-format
- msgid "%s: hardware type not supported!\n"
- msgstr "hardwarový typ %s není podporován!\n"
- 
--#: ../arp.c:668
-+#: ../arp.c:681
- #, c-format
- msgid "%s: address family not supported!\n"
- msgstr "tøída adres %s není podporována!\n"
- 
--#: ../arp.c:703
-+#: ../arp.c:716
-+#, c-format
- msgid "arp: -N not yet supported.\n"
- msgstr "arp: pøepínaè -N není zatím podporován\n"
- 
--#: ../arp.c:713
-+#: ../arp.c:726
- #, c-format
- msgid "arp: %s: unknown address family.\n"
- msgstr "arp: neznámá tøída adres %s.\n"
- 
--#: ../arp.c:722
-+#: ../arp.c:735
- #, c-format
- msgid "arp: %s: unknown hardware type.\n"
- msgstr "arp: neznámý hardwarový typ %s.\n"
- 
--#: ../arp.c:741
-+#: ../arp.c:754
- #, c-format
- msgid "arp: %s: kernel only supports 'inet'.\n"
- msgstr "arp: %s: jádro podporuje pouze 'inet'.\n"
- 
--#: ../arp.c:746
-+#: ../arp.c:767
- #, c-format
- msgid "arp: %s: hardware type without ARP support.\n"
- msgstr "arp: hardwarový typ %s nepodporuje ARP.\n"
- 
--#: ../hostname.c:69
-+#: ../hostname.c:71
- #, c-format
- msgid "Setting nodename to `%s'\n"
- msgstr "Nastavuji jméno uzlu na `%s'\n"
- 
--#: ../hostname.c:74
-+#: ../hostname.c:76
- #, c-format
- msgid "%s: you must be root to change the node name\n"
- msgstr "%s: jméno uzlu mù¾e zmìnit pouze superu¾ivatel\n"
- 
--#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
- #, c-format
- msgid "%s: name too long\n"
- msgstr "jméno %s je pøíli¹ dlouhé\n"
- 
--#: ../hostname.c:89
-+#: ../hostname.c:91
- #, c-format
- msgid "Setting hostname to `%s'\n"
- msgstr "Nastavuji jméno poèítaèe na `%s'\n"
- 
--#: ../hostname.c:94
-+#: ../hostname.c:96
- #, c-format
- msgid "%s: you must be root to change the host name\n"
- msgstr "%s: jméno poèítaèe mù¾e zmìnit pouze superu¾ivatel\n"
- 
--#: ../hostname.c:108
-+#: ../hostname.c:109
- #, c-format
- msgid "Setting domainname to `%s'\n"
- msgstr "Nastavuji jméno domény na `%s'\n"
- 
--#: ../hostname.c:113
-+#: ../hostname.c:114
- #, c-format
- msgid "%s: you must be root to change the domain name\n"
- msgstr "%s: jméno domény mù¾e zmìnit pouze superu¾ivatel\n"
-@@ -306,26 +326,29 @@
- msgid "Result: h_addr_list=`%s'\n"
- msgstr "Výsledek: h_addr_list=`%s'\n"
- 
--#: ../hostname.c:209
-+#: ../hostname.c:208
- #, c-format
- msgid "%s: can't open `%s'\n"
- msgstr "%s: `%s' nelze otevøít\n"
- 
--#: ../hostname.c:223
-+#: ../hostname.c:222
-+#, c-format
- msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
- msgstr ""
- "Pou¾ití:\n"
- "    hostname [-v] {jméno|-F soubor}       nastaví jméno poèítaèe (ze "
- "souboru)\n"
- 
--#: ../hostname.c:224
-+#: ../hostname.c:223
-+#, c-format
- msgid ""
- "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
- msgstr ""
- "    domainname [-v] {jméno|-F soubor}     nastaví jméno NIS domény (ze\n"
- "                                          souboru)\n"
- 
--#: ../hostname.c:226
-+#: ../hostname.c:225
-+#, c-format
- msgid ""
- "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
- "file)\n"
-@@ -333,11 +356,13 @@
- "    nodename [-v] {jméno|-F soubor}       nastaví jméno DECnet uzlu (ze\n"
- "                                          souboru)\n"
- 
--#: ../hostname.c:228
-+#: ../hostname.c:227
-+#, c-format
- msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
- msgstr "    hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  vypí¹e formátované jméno\n"
- 
--#: ../hostname.c:229
-+#: ../hostname.c:228
-+#, c-format
- msgid ""
- "       hostname [-v]                         display hostname\n"
- "\n"
-@@ -345,7 +370,8 @@
- "    hostname [-v]                         vypí¹e jméno poèítaèe\n"
- "\n"
- 
--#: ../hostname.c:230
-+#: ../hostname.c:229
-+#, c-format
- msgid ""
- "       hostname -V|--version|-h|--help       print info and exit\n"
- "\n"
-@@ -353,7 +379,8 @@
- "    hostname -V|--version|-h|--help       vypí¹e informace a skonèí\n"
- "\n"
- 
--#: ../hostname.c:231
-+#: ../hostname.c:230
-+#, c-format
- msgid ""
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
-@@ -361,35 +388,43 @@
- "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
- "\n"
- 
--#: ../hostname.c:232
-+#: ../hostname.c:231
-+#, c-format
- msgid "    -s, --short           short host name\n"
- msgstr "    -s, --short           krátké jméno poèítaèe\n"
- 
--#: ../hostname.c:233
-+#: ../hostname.c:232
-+#, c-format
- msgid "    -a, --alias           alias names\n"
- msgstr "    -a, --alias           pøezdívky\n"
- 
--#: ../hostname.c:234
-+#: ../hostname.c:233
-+#, c-format
- msgid "    -i, --ip-address      addresses for the hostname\n"
- msgstr "    -i, --ip-address      adresy odpovídající jménu poèítaèe\n"
- 
--#: ../hostname.c:235
-+#: ../hostname.c:234
-+#, c-format
- msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
- msgstr "    -f, --fqdn, --long    dlouhé jméno poèítaèe (kanonické)\n"
- 
--#: ../hostname.c:236
-+#: ../hostname.c:235
-+#, c-format
- msgid "    -d, --domain          DNS domain name\n"
- msgstr "    -d, --domain          jméno DNS domény\n"
- 
--#: ../hostname.c:237
-+#: ../hostname.c:236
-+#, c-format
- msgid "    -y, --yp, --nis       NIS/YP domainname\n"
- msgstr "    -y, --yp, --nis       jméno NIS/YP domény\n"
- 
--#: ../hostname.c:239
-+#: ../hostname.c:238
-+#, c-format
- msgid "    -n, --node            DECnet node name\n"
- msgstr "    -n, --node            jméno DECnet uzlu\n"
- 
--#: ../hostname.c:241
-+#: ../hostname.c:240
-+#, c-format
- msgid ""
- "    -F, --file            read hostname or NIS domainname from given file\n"
- "\n"
-@@ -397,7 +432,8 @@
- "    -F, --file            ète jméno poèítaèe èi nis domény ze souboru\n"
- "\n"
- 
--#: ../hostname.c:243
-+#: ../hostname.c:242
-+#, c-format
- msgid ""
- "   This command can read or set the hostname or the NIS domainname. You can\n"
- "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-@@ -412,6 +448,7 @@
- msgstr "%s: Tímto pøíkazem nelze DNS jméno domény zmìnit\n"
- 
- #: ../hostname.c:339
-+#, c-format
- msgid ""
- "\n"
- "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-@@ -421,6 +458,7 @@
- "zmìnit\n"
- 
- #: ../hostname.c:340
-+#, c-format
- msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
- msgstr ""
- "DNS jméno domény (je souèástí kanonického jména poèítaèe) v souboru\n"
-@@ -441,349 +479,223 @@
- msgid "getnodename()=`%s'\n"
- msgstr "getnodename()=`%s'\n"
- 
--#: ../ifconfig.c:159
--#, c-format
--msgid "%-9.9s Link encap:%s  "
--msgstr "%-9.9s Zapouzdøení:%s  "
-+#: ../ifconfig.c:107
-+#, fuzzy, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr ""
-+"Rozhr   MTU Met    PØ-OK PØ-CHYB PØ-ZAH PØ-PØT   OD-OK OD-CHYB OD-ZAH OD-PØT "
-+"PØZ\n"
- 
--#: ../ifconfig.c:164
--#, c-format
--msgid "HWaddr %s  "
--msgstr "HWadr %s  "
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, fuzzy, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
- 
--#: ../ifconfig.c:167
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
- #, c-format
--msgid "Media:%s"
--msgstr "Médium:%s"
-+msgid "No support for INET on this system.\n"
-+msgstr "Tento systém nepodporuje INET.\n"
- 
--#: ../ifconfig.c:169
--msgid "(auto)"
--msgstr "(auto)"
-+#: ../ifconfig.c:193
-+#, fuzzy, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
- 
--#: ../ifconfig.c:176
--#, c-format
--msgid "          %s addr:%s "
--msgstr "          %s adr:%s "
-+#: ../ifconfig.c:202
-+#, fuzzy, c-format
-+msgid ""
-+"Usage:\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+msgstr ""
-+"Pou¾ití:\n"
-+"  ifconfig [-a] [-i] [-v] <rozhraní> [[<AF>] <adresa>]\n"
- 
--#: ../ifconfig.c:179
-+#: ../ifconfig.c:204
- #, c-format
--msgid " P-t-P:%s "
--msgstr " P-t-P:%s "
-+msgid "  [add <address>[/<prefixlen>]]\n"
-+msgstr "  [add <adresa>[/<délka prefixu>]]\n"
- 
--# V ostatních katalozích se pøekládá Broadcast -> v¹esmìrové vysílání.
--# Tudi¾ bcast -> V¹esmìr :)
--#: ../ifconfig.c:182
-+#: ../ifconfig.c:205
- #, c-format
--msgid " Bcast:%s "
--msgstr " V¹esmìr:%s "
-+msgid "  [del <address>[/<prefixlen>]]\n"
-+msgstr "  [del <adresa>[/<délka prefixu>]]\n"
- 
--#: ../ifconfig.c:184
-+#: ../ifconfig.c:206
- #, c-format
--msgid " Mask:%s\n"
--msgstr "Maska:%s\n"
-+msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+msgstr "  [[-]broadcast [<adresa>]]  [[-]pointopoint [<adresa>]]\n"
- 
--#: ../ifconfig.c:201
-+#: ../ifconfig.c:207
- #, c-format
--msgid "          inet6 addr: %s/%d"
--msgstr "          inet6-adr: %s/%d"
-+msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+msgstr "  [netmask <adresa>]  [dstaddr <adresa>]  [tunnel <adresa>]\n"
- 
--#: ../ifconfig.c:203
--msgid " Scope:"
--msgstr " Rozsah:"
-+#: ../ifconfig.c:210
-+#, c-format
-+msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+msgstr "  [outfill <NN>] [keepalive <NN>]\n"
- 
--#: ../ifconfig.c:206
--msgid "Global"
--msgstr "Globál"
-+#: ../ifconfig.c:212
-+#, c-format
-+msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+msgstr "  [hw <HW> <adresa>]  [metric <NN>]  [mtu <NN>]\n"
- 
--#: ../ifconfig.c:209
--msgid "Link"
--msgstr "Linka"
-+#: ../ifconfig.c:213
-+#, c-format
-+msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
- 
--#: ../ifconfig.c:212
--msgid "Site"
--msgstr "Stanovi¹tì"
-+#: ../ifconfig.c:214
-+#, c-format
-+msgid "  [multicast]  [[-]promisc]\n"
-+msgstr "  [multicast]  [[-]promisc]\n"
- 
- #: ../ifconfig.c:215
--msgid "Compat"
--msgstr "Kompatibilita"
-+#, c-format
-+msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <typ>]\n"
- 
--#: ../ifconfig.c:218
--msgid "Host"
--msgstr "Poèítaè"
-+#: ../ifconfig.c:217
-+#, c-format
-+msgid "  [txqueuelen <NN>]\n"
-+msgstr "  [txqueuelen délka]\n"
- 
--#: ../ifconfig.c:221
--msgid "Unknown"
--msgstr "Neznám."
-+#: ../ifconfig.c:220
-+#, c-format
-+msgid "  [[-]dynamic]\n"
-+msgstr "  [[-]dynamic]\n"
- 
--#: ../ifconfig.c:236
-+#: ../ifconfig.c:222
- #, c-format
--msgid "          IPX/Ethernet II addr:%s\n"
--msgstr "          IPX/Ethernet II adr: %s\n"
-+msgid ""
-+"  [up|down] ...\n"
-+"\n"
-+msgstr ""
-+"  [up|down] ...\n"
-+"\n"
- 
--#: ../ifconfig.c:239
-+#: ../ifconfig.c:224
- #, c-format
--msgid "          IPX/Ethernet SNAP addr:%s\n"
--msgstr "          IPX/Ethernet SNAP adr:%s\n"
-+msgid "  <HW>=Hardware Type.\n"
-+msgstr "   <HW>=Hardwarový Typ.\n"
- 
--#: ../ifconfig.c:242
-+#: ../ifconfig.c:225
- #, c-format
--msgid "          IPX/Ethernet 802.2 addr:%s\n"
--msgstr "          IPX/Ethernet 802.2 adr:%s\n"
-+msgid "  List of possible hardware types:\n"
-+msgstr "  Seznam mo¾ných hardwarových typù:\n"
- 
--#: ../ifconfig.c:245
-+#. 1 = ARPable
-+#: ../ifconfig.c:227
- #, c-format
--msgid "          IPX/Ethernet 802.3 addr:%s\n"
--msgstr "          IPX/Ethernet 802.3 adr:%s\n"
-+msgid "  <AF>=Address family. Default: %s\n"
-+msgstr "   <AF>=tøída adres. Implicitní: %s\n"
- 
--#: ../ifconfig.c:255
-+#: ../ifconfig.c:228
- #, c-format
--msgid "          EtherTalk Phase 2 addr:%s\n"
--msgstr "          EtherTalk Phase 2 adr:%s\n"
-+msgid "  List of possible address families:\n"
-+msgstr "  Seznam mo¾ných tøíd adres:\n"
- 
--#: ../ifconfig.c:264
-+#: ../ifconfig.c:303
- #, c-format
--msgid "          econet addr:%s\n"
--msgstr "          econet adr:%s\n"
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr ""
- 
--# Hic sunt leones ...
--#: ../ifconfig.c:270
--msgid "[NO FLAGS] "
--msgstr "[®ÁDNÉ PØÍZNAKY]"
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:272
--msgid "UP "
--msgstr "AKTIVOVÁNO "
-+#: ../ifconfig.c:380
-+#, c-format
-+msgid "Unknown media type.\n"
-+msgstr "Neznámý typ média.\n"
- 
--#: ../ifconfig.c:274
--msgid "BROADCAST "
--msgstr "V©ESMÌROVÉ_VYSÍLÁNÍ "
-+#: ../ifconfig.c:417
-+#, c-format
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr ""
- 
--#: ../ifconfig.c:276
--msgid "DEBUG "
--msgstr "DEBUG "
-+#: ../ifconfig.c:429
-+#, c-format
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:278
--msgid "LOOPBACK "
--msgstr "SMYÈKA "
-+#: ../ifconfig.c:441
-+#, c-format
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:280
--msgid "POINTOPOINT "
--msgstr "POINTOPOINT "
-+#: ../ifconfig.c:465
-+#, c-format
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr ""
- 
--# ??
--#: ../ifconfig.c:282
--msgid "NOTRAILERS "
--msgstr "NOTRAILERS "
-+#: ../ifconfig.c:523
-+#, c-format
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:284
--msgid "RUNNING "
--msgstr "BÌ®Í "
-+#: ../ifconfig.c:652
-+#, c-format
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:286
--msgid "NOARP "
--msgstr "NEARP "
-+#: ../ifconfig.c:684
-+#, c-format
-+msgid "hw address type `%s' has no handler to set address. failed.\n"
-+msgstr ""
- 
--#: ../ifconfig.c:288
--msgid "PROMISC "
--msgstr "PROMISK "
-+#: ../ifconfig.c:693
-+#, c-format
-+msgid "%s: invalid %s address.\n"
-+msgstr "%s: adresa %s je nesprávná.\n"
- 
--#: ../ifconfig.c:290
--msgid "ALLMULTI "
--msgstr "ALLMULTI "
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+#, c-format
-+msgid "No support for INET6 on this system.\n"
-+msgstr "Tento systém nepodporuje INET6.\n"
- 
--#: ../ifconfig.c:292
--msgid "SLAVE "
--msgstr "SLAVE "
-+#: ../ifconfig.c:780 ../ifconfig.c:871
-+#, c-format
-+msgid "Interface %s not initialized\n"
-+msgstr ""
- 
--#: ../ifconfig.c:294
--msgid "MASTER "
--msgstr "MASTER "
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, fuzzy, c-format
-+msgid "Bad address.\n"
-+msgstr "%s: adresa %s je nesprávná.\n"
- 
--#: ../ifconfig.c:296
--msgid "MULTICAST "
--msgstr "MULTICAST "
--
--#: ../ifconfig.c:299
--msgid "DYNAMIC "
--msgstr "DYNAMIC "
--
--#: ../ifconfig.c:302
--#, c-format
--msgid " MTU:%d  Metric:%d"
--msgstr " MTU:%d  Metrika:%d"
--
--#: ../ifconfig.c:306
--#, c-format
--msgid "  Outfill:%d  Keepalive:%d"
--msgstr "  Outfill:%d  Keepalive:%d"
--
--#: ../ifconfig.c:320
--#, c-format
--msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
--msgstr "pøijmutých paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu rámcù:%lu\n"
--
--#: ../ifconfig.c:325
--#, c-format
--msgid "             compressed:%lu\n"
--msgstr "             komprimováno:%lu\n"
--
--# carrier?
--#: ../ifconfig.c:329
--#, c-format
--msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
--msgstr "odeslaných paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu pøenos:%lu\n"
--
--#: ../ifconfig.c:333
--#, c-format
--msgid "          collisions:%lu "
--msgstr "          kolizí:%lu "
--
--#: ../ifconfig.c:335
--#, c-format
--msgid "compressed:%lu "
--msgstr "komprimováno:%lu "
--
--#: ../ifconfig.c:337
--#, c-format
--msgid "txqueuelen:%d "
--msgstr "délka odchozí fronty:%d "
--
--#: ../ifconfig.c:345
--#, c-format
--msgid "Interrupt:%d "
--msgstr "Pøeru¹ení:%d "
--
--#. Only print devices using it for
--#. I/O maps
--#: ../ifconfig.c:348
--#, c-format
--msgid "Base address:0x%x "
--msgstr "Vstupnì/Výstupní port:0x%x "
--
--#: ../ifconfig.c:350
--#, c-format
--msgid "Memory:%lx-%lx "
--msgstr "Pamì»:%lx-%lx "
--
--#: ../ifconfig.c:353
--#, c-format
--msgid "DMA chan:%x "
--msgstr "Kanál DMA:%x "
--
--#: ../ifconfig.c:384 ../ifconfig.c:405
--#, c-format
--msgid "%s: unknown interface: %s\n"
--msgstr "%s: rozhraní %s není známo\n"
--
--#: ../ifconfig.c:421
--msgid ""
--"Usage:\n"
--"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
--msgstr ""
--"Pou¾ití:\n"
--"  ifconfig [-a] [-i] [-v] <rozhraní> [[<AF>] <adresa>]\n"
--
--#: ../ifconfig.c:425
--msgid "  [add <address>[/<prefixlen>]]\n"
--msgstr "  [add <adresa>[/<délka prefixu>]]\n"
--
--#: ../ifconfig.c:427
--msgid "  [del <address>[/<prefixlen>]]\n"
--msgstr "  [del <adresa>[/<délka prefixu>]]\n"
--
--#: ../ifconfig.c:432
--msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
--msgstr "  [[-]broadcast [<adresa>]]  [[-]pointopoint [<adresa>]]\n"
--
--#: ../ifconfig.c:433
--msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
--msgstr "  [netmask <adresa>]  [dstaddr <adresa>]  [tunnel <adresa>]\n"
--
--#: ../ifconfig.c:436
--msgid "  [outfill <NN>] [keepalive <NN>]\n"
--msgstr "  [outfill <NN>] [keepalive <NN>]\n"
--
--#: ../ifconfig.c:438
--msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
--msgstr "  [hw <HW> <adresa>]  [metric <NN>]  [mtu <NN>]\n"
--
--#: ../ifconfig.c:439
--msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
--
--#: ../ifconfig.c:440
--msgid "  [multicast]  [[-]promisc]\n"
--msgstr "  [multicast]  [[-]promisc]\n"
--
--#: ../ifconfig.c:441
--msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
--msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <typ>]\n"
--
--#: ../ifconfig.c:443
--msgid "  [txqueuelen <NN>]\n"
--msgstr "  [txqueuelen délka]\n"
--
--#: ../ifconfig.c:446
--msgid "  [[-]dynamic]\n"
--msgstr "  [[-]dynamic]\n"
--
--#: ../ifconfig.c:448
--msgid ""
--"  [up|down] ...\n"
--"\n"
--msgstr ""
--"  [up|down] ...\n"
--"\n"
--
--#: ../ifconfig.c:450
--msgid "  <HW>=Hardware Type.\n"
--msgstr "   <HW>=Hardwarový Typ.\n"
--
--#: ../ifconfig.c:451
--msgid "  List of possible hardware types:\n"
--msgstr "  Seznam mo¾ných hardwarových typù:\n"
--
--#. 1 = ARPable
--#: ../ifconfig.c:453
--#, c-format
--msgid "  <AF>=Address family. Default: %s\n"
--msgstr "   <AF>=tøída adres. Implicitní: %s\n"
--
--#: ../ifconfig.c:454
--msgid "  List of possible address families:\n"
--msgstr "  Seznam mo¾ných tøíd adres:\n"
--
--#: ../ifconfig.c:593
--msgid "Unknown media type.\n"
--msgstr "Neznámý typ média.\n"
--
--#: ../ifconfig.c:881
-+#: ../ifconfig.c:885
- #, c-format
--msgid "%s: invalid %s address.\n"
--msgstr "%s: adresa %s je nesprávná.\n"
--
--#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
--msgid "No support for INET6 on this system.\n"
--msgstr "Tento systém nepodporuje INET6.\n"
--
--#: ../ifconfig.c:983
- msgid "Address deletion not supported on this system.\n"
- msgstr "Tento systém nepodporuje mazání adres.\n"
- 
--#: ../ifconfig.c:1066
--msgid "No support for INET on this system.\n"
--msgstr "Tento systém nepodporuje INET.\n"
-+#: ../ifconfig.c:957
-+#, fuzzy, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "Nevím, jak nastavit adresu tøídy %d.\n"
- 
--#: ../ifconfig.c:1076
-+#: ../ifconfig.c:983
-+#, c-format
- msgid "No support for ECONET on this system.\n"
- msgstr "Tento systém nepodporuje ECONET.\n"
- 
--#: ../ifconfig.c:1084
-+#: ../ifconfig.c:991
- #, c-format
- msgid "Don't know how to set addresses for family %d.\n"
- msgstr "Nevím, jak nastavit adresu tøídy %d.\n"
- 
--#: ../netstat.c:383
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr ""
-+
-+#: ../netstat.c:434
- #, c-format
- msgid ""
- "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-@@ -792,7 +704,8 @@
- "jste\n"
- "byl superu¾ivatelem)\n"
- 
--#: ../netstat.c:387
-+#: ../netstat.c:438
-+#, c-format
- msgid ""
- "(Not all processes could be identified, non-owned process info\n"
- " will not be shown, you would have to be root to see it all.)\n"
-@@ -801,199 +714,223 @@
- "pouze o procesech, jich¾ jste vlastníkem. Aby jste mohl vidìt v¹e, musel\n"
- "byste být superu¾ivatelem.)\n"
- 
--#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
- msgid "LISTENING"
- msgstr "NASLOUCHÁ"
- 
--#: ../netstat.c:395
-+#: ../netstat.c:446
- msgid "CONN SENT"
- msgstr "CONN ODESLÁN"
- 
--#: ../netstat.c:396 ../netstat.c:1168
-+#: ../netstat.c:447 ../netstat.c:1268
- msgid "DISC SENT"
- msgstr "DISC ODESLÁN"
- 
--#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
- msgid "ESTABLISHED"
- msgstr "SPOJENO"
- 
--#: ../netstat.c:419
-+#: ../netstat.c:470
-+#, c-format
- msgid "Active NET/ROM sockets\n"
- msgstr "Aktivní NET/ROM sokety\n"
- 
--#: ../netstat.c:420
-+#: ../netstat.c:471
-+#, c-format
- msgid ""
--"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
--"Recv-Q\n"
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
- msgstr ""
--"U¾ivatel   Cíl        Zdroj      Zaøízení Stav        Vr/Vs    Odch-F "
--"Pøích-F\n"
-+"U¾ivatel   Cíl        Zdroj      Zaøízení Stav        Vr/Vs    Odch-F Pøích-"
-+"F\n"
- 
--#: ../netstat.c:430 ../netstat.c:1208
-+#: ../netstat.c:481 ../netstat.c:1308
- #, c-format
- msgid "Problem reading data from %s\n"
- msgstr "Chyba pøi ètení dat z %s\n"
- 
- # následující radìji ponechat v originále ?!
--#: ../netstat.c:465
-+#: ../netstat.c:516
- msgid "SYN_SENT"
- msgstr "SYN_SENT"
- 
--#: ../netstat.c:466
-+#: ../netstat.c:517
- msgid "SYN_RECV"
- msgstr "SYN_RECV"
- 
--#: ../netstat.c:467
-+#: ../netstat.c:518
- msgid "FIN_WAIT1"
- msgstr "FIN_WAIT1"
- 
--#: ../netstat.c:468
-+#: ../netstat.c:519
- msgid "FIN_WAIT2"
- msgstr "FIN_WAIT2"
- 
--#: ../netstat.c:469
-+#: ../netstat.c:520
- msgid "TIME_WAIT"
- msgstr "TIME_WAIT"
- 
--#: ../netstat.c:470
-+#: ../netstat.c:521
- msgid "CLOSE"
- msgstr "ZAVØEN"
- 
--#: ../netstat.c:471
-+#: ../netstat.c:522
- msgid "CLOSE_WAIT"
- msgstr "CLOSE_WAIT"
- 
--#: ../netstat.c:472
-+#: ../netstat.c:523
- msgid "LAST_ACK"
- msgstr "POSLEDNÍ ACK"
- 
--#: ../netstat.c:473
-+#: ../netstat.c:524
- msgid "LISTEN"
- msgstr "LISTEN"
- 
--#: ../netstat.c:474
-+#: ../netstat.c:525
- msgid "CLOSING"
- msgstr "ZAVíRÁ"
- 
--#: ../netstat.c:544
-+#: ../netstat.c:596
- #, c-format
- msgid "warning, got bogus igmp6 line %d.\n"
- msgstr "varování, nesmyslný igmp6 øádek %d.\n"
- 
--#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
--#: ../netstat.c:935 ../netstat.c:940
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
- #, c-format
- msgid "netstat: unsupported address family %d !\n"
- msgstr "netstat: tøída adres %d není podporována !\n"
- 
--#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
- #, c-format
- msgid "warning, got bogus igmp line %d.\n"
- msgstr "varování, nesmyslný igmp øádek %d.\n"
- 
--#: ../netstat.c:666
-+#: ../netstat.c:677
-+#, fuzzy, c-format
-+msgid "Active X.25 sockets\n"
-+msgstr "Aktivní AX.25 sokety\n"
-+
-+#. IMHO, Vr/Vs is not very usefull --SF
-+#: ../netstat.c:679
-+#, fuzzy, c-format
-+msgid ""
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
-+msgstr "Cíl        Zdroj      Zaøíz   Stav         Vr/Vs    Odhod-F Pøích-F\n"
-+
-+#: ../netstat.c:759
-+#, c-format
- msgid "warning, got bogus tcp line.\n"
- msgstr "varování, nesmyslný tcp øádek.\n"
- 
--#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
- #, c-format
- msgid "off (0.00/%ld/%d)"
- msgstr "vyp (0.00/%ld/%d)"
- 
--#: ../netstat.c:708
-+#: ../netstat.c:804
- #, fuzzy, c-format
- msgid "on (%2.2f/%ld/%d)"
- msgstr "zap%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:713
-+#: ../netstat.c:809
- #, fuzzy, c-format
- msgid "keepalive (%2.2f/%ld/%d)"
- msgstr "zap%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:718
-+#: ../netstat.c:814
- #, fuzzy, c-format
- msgid "timewait (%2.2f/%ld/%d)"
- msgstr "zap%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
- #, c-format
- msgid "unkn-%d (%2.2f/%ld/%d)"
- msgstr "nezn-%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:799
-+#: ../netstat.c:894
-+#, c-format
- msgid "warning, got bogus udp line.\n"
- msgstr "varování, nesmyslný udp øádek.\n"
- 
--#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
- msgid "UNKNOWN"
- msgstr "NEZNÁM"
- 
--#: ../netstat.c:860 ../netstat.c:980
-+#: ../netstat.c:958 ../netstat.c:1080
- #, c-format
- msgid "on%d (%2.2f/%ld/%d)"
- msgstr "zap%d (%2.2f/%ld/%d)"
- 
--#: ../netstat.c:949
-+#: ../netstat.c:1046
-+#, c-format
- msgid "warning, got bogus raw line.\n"
- msgstr "varování, nesmyslný 'raw' øádek.\n"
- 
--#: ../netstat.c:1028
-+#: ../netstat.c:1128
-+#, c-format
- msgid "warning, got bogus unix line.\n"
- msgstr "varování, netstat 'unix' øádek.\n"
- 
--#: ../netstat.c:1055
-+#: ../netstat.c:1155
- msgid "STREAM"
- msgstr "STREAM"
- 
--#: ../netstat.c:1059
-+#: ../netstat.c:1159
- msgid "DGRAM"
- msgstr "DGRAM"
- 
--#: ../netstat.c:1063
-+#: ../netstat.c:1163
- msgid "RAW"
- msgstr "RAW"
- 
--#: ../netstat.c:1067
-+#: ../netstat.c:1167
- msgid "RDM"
- msgstr "RDM"
- 
--#: ../netstat.c:1071
-+#: ../netstat.c:1171
- msgid "SEQPACKET"
- msgstr "SEQPACKET"
- 
--#: ../netstat.c:1080
-+#: ../netstat.c:1180
- msgid "FREE"
- msgstr "NEALOKOVÁN"
- 
--#: ../netstat.c:1096
-+#: ../netstat.c:1196
- msgid "CONNECTING"
- msgstr "SPOJUJE"
- 
--#: ../netstat.c:1100
-+#: ../netstat.c:1200
- msgid "CONNECTED"
- msgstr "SPOJEN"
- 
--#: ../netstat.c:1104
-+#: ../netstat.c:1204
- msgid "DISCONNECTING"
- msgstr "ODPOJUJE"
- 
--#: ../netstat.c:1135
-+#: ../netstat.c:1235
-+#, c-format
- msgid "Active UNIX domain sockets "
- msgstr "Aktivní sokety domény UNIX "
- 
--#: ../netstat.c:1137 ../netstat.c:1666
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
- msgid "(servers and established)"
- msgstr "(servery a navázaná spojení)"
- 
--#: ../netstat.c:1140 ../netstat.c:1669
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
- msgid "(only servers)"
- msgstr "(pouze servery)"
- 
--#: ../netstat.c:1142 ../netstat.c:1671
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
- msgid "(w/o servers)"
- msgstr "(w/o servery)"
- 
--#: ../netstat.c:1145
-+#: ../netstat.c:1245
-+#, c-format
- msgid ""
- "\n"
- "Proto RefCnt Flags       Type       State         I-Node"
-@@ -1001,90 +938,92 @@
- "\n"
- "Proto Èítaè  Pøíznaky    Typ        Stav          I-Uzel"
- 
--#: ../netstat.c:1147
-+#: ../netstat.c:1247
-+#, c-format
- msgid " Path\n"
- msgstr " Cesta\n"
- 
--#: ../netstat.c:1167
-+#: ../netstat.c:1267
- msgid "SABM SENT"
- msgstr "SABM ODESLÁN"
- 
--#: ../netstat.c:1170
-+#: ../netstat.c:1270
- msgid "RECOVERY"
- msgstr "OBNOVA"
- 
--#: ../netstat.c:1184
-+#: ../netstat.c:1284
-+#, c-format
- msgid "Active AX.25 sockets\n"
- msgstr "Aktivní AX.25 sokety\n"
- 
--#: ../netstat.c:1185
-+#: ../netstat.c:1285
-+#, c-format
- msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
- msgstr "Cíl        Zdroj      Zaøíz   Stav         Vr/Vs    Odhod-F Pøích-F\n"
- 
--#: ../netstat.c:1228
-+#: ../netstat.c:1328
- #, c-format
- msgid "problem reading data from %s\n"
- msgstr "chyba pøi ètení dat z %s\n"
- 
--#: ../netstat.c:1279
-+#: ../netstat.c:1379
-+#, c-format
- msgid ""
- "Active IPX sockets\n"
- "Proto Recv-Q Send-Q Local Address              Foreign Address            "
- "State"
- msgstr ""
- "Aktivní IPX sokety\n"
--"Proto Pøích-F Odch-F Lokál adresa              Vzdálená adresa               "
--" Stav"
-+"Proto Pøích-F Odch-F Lokál adresa              Vzdálená "
-+"adresa                Stav"
- 
--#: ../netstat.c:1281
-+#: ../netstat.c:1381
-+#, c-format
- msgid " User"
- msgstr " U¾ivatel"
- 
--#: ../netstat.c:1315
-+#: ../netstat.c:1415
- msgid "ESTAB"
- msgstr "SPOJEN"
- 
--#: ../netstat.c:1323
-+#: ../netstat.c:1423
- msgid "UNK."
- msgstr "NEZ."
- 
--#: ../netstat.c:1367
--msgid "     - no statistics available -"
--msgstr "     - statistická data nejsou dostupná -"
--
--#: ../netstat.c:1370
--msgid "[NO FLAGS]"
--msgstr "[®ÁDNÉ PØÍZNAKY]"
--
--#: ../netstat.c:1400
-+#: ../netstat.c:1461
-+#, c-format
- msgid "Kernel Interface table\n"
- msgstr "Tabulka rozhraní v jádru\n"
- 
--#: ../netstat.c:1401
-+#: ../netstat.c:1465
-+#, fuzzy, c-format
- msgid ""
--"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
- "Flg\n"
- msgstr ""
- "Rozhr   MTU Met    PØ-OK PØ-CHYB PØ-ZAH PØ-PØT   OD-OK OD-CHYB OD-ZAH OD-PØT "
- "PØZ\n"
- 
--#: ../netstat.c:1404
-+#: ../netstat.c:1469
- msgid "missing interface information"
- msgstr "chybí informace o rozhraní"
- 
--#: ../netstat.c:1425
-+#: ../netstat.c:1492
-+#, c-format
- msgid ""
--"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
--"{-V|--version|-h|--help}\n"
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
- msgstr ""
--"Pou¾ití: netstat [--veenNcCF] [<TA>] -r       netstat "
--"{-V|--version|-h|--help}\n"
-+"Pou¾ití: netstat [--veenNcCF] [<TA>] -r       netstat {-V|--version|-h|--"
-+"help}\n"
- 
--#: ../netstat.c:1426
-+#: ../netstat.c:1493
-+#, c-format
- msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
- msgstr "         netstat [-vnNcaeol] [<Soket> ...]\n"
- 
--#: ../netstat.c:1427
-+#: ../netstat.c:1494
-+#, c-format
- msgid ""
- "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
-@@ -1092,27 +1031,32 @@
- "         netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
- "\n"
- 
--#: ../netstat.c:1429
-+#: ../netstat.c:1496
-+#, c-format
- msgid "        -r, --route              display routing table\n"
- msgstr "         -r, --route              vypí¹e smìrovací tabulku\n"
- 
--#: ../netstat.c:1430
-+#: ../netstat.c:1497
-+#, c-format
- msgid "        -i, --interfaces         display interface table\n"
- msgstr "         -i, --interfaces         vypí¹e tabulku rozhraní\n"
- 
--#: ../netstat.c:1431
-+#: ../netstat.c:1498
-+#, c-format
- msgid "        -g, --groups             display multicast group memberships\n"
- msgstr ""
- "         -g, --groups             vypí¹e èlenství v multicast skupinách\n"
- 
--#: ../netstat.c:1432
-+#: ../netstat.c:1499
-+#, c-format
- msgid ""
- "        -s, --statistics         display networking statistics (like SNMP)\n"
- msgstr ""
- "         -s, --statistics         vypí¹e statistiku sí»ové aktivity (jako "
- "SNMP)\n"
- 
--#: ../netstat.c:1434
-+#: ../netstat.c:1501
-+#, c-format
- msgid ""
- "        -M, --masquerade         display masqueraded connections\n"
- "\n"
-@@ -1120,20 +1064,45 @@
- "         -M, --masquerade         vypí¹e maskovaná spojení\n"
- "\n"
- 
--#: ../netstat.c:1438 ../route.c:87
-+#: ../netstat.c:1505
-+#, fuzzy, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
-+msgstr ""
-+"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-+"                                 na kanonická jména\n"
-+
-+#: ../netstat.c:1506
-+#, fuzzy, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
-+msgstr ""
-+"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-+"                                 na kanonická jména\n"
-+
-+#: ../netstat.c:1507
-+#, fuzzy, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
-+msgstr ""
-+"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-+"                                 na kanonická jména\n"
-+
-+#: ../netstat.c:1508
-+#, c-format
- msgid "        -N, --symbolic           resolve hardware names\n"
- msgstr "         -N, --symbolic           pøevede hw jména\n"
- 
--#: ../netstat.c:1439 ../route.c:88
-+#: ../netstat.c:1509 ../route.c:88
-+#, c-format
- msgid "        -e, --extend             display other/more information\n"
- msgstr "         -e, --extend             vypí¹e podrobnìj¹í informace\n"
- 
--#: ../netstat.c:1440
-+#: ../netstat.c:1510
-+#, c-format
- msgid "        -p, --programs           display PID/Program name for sockets\n"
- msgstr ""
- "         -p, --programs           vypí¹e PID/jméno programu pro sokety\n"
- 
--#: ../netstat.c:1441
-+#: ../netstat.c:1511
-+#, c-format
- msgid ""
- "        -c, --continuous         continuous listing\n"
- "\n"
-@@ -1141,23 +1110,27 @@
- "         -c, --continuous         nepøeru¹ovaný výpis\n"
- "\n"
- 
--#: ../netstat.c:1442
-+#: ../netstat.c:1512
-+#, c-format
- msgid "        -l, --listening          display listening server sockets\n"
- msgstr ""
- "         -l, --listening          vypí¹e sokety, na nich¾ je nasloucháno\n"
- 
--#: ../netstat.c:1443
-+#: ../netstat.c:1513
-+#, c-format
- msgid ""
- "        -a, --all, --listening   display all sockets (default: connected)\n"
- msgstr ""
- "         -a, --all, --listening   vypí¹e v¹echny sokety (implicitnì: "
- "spojené)\n"
- 
--#: ../netstat.c:1444
-+#: ../netstat.c:1514
-+#, c-format
- msgid "        -o, --timers             display timers\n"
- msgstr "         -o, --timers             zobrazí èasovaèe\n"
- 
--#: ../netstat.c:1445 ../route.c:89
-+#: ../netstat.c:1515 ../route.c:89
-+#, c-format
- msgid ""
- "        -F, --fib                display Forwarding Information Base "
- "(default)\n"
-@@ -1165,112 +1138,126 @@
- "         -F, --fib                zobrazí Forwarding Infomation Base\n"
- "                                  (implicitní)\n"
- 
--#: ../netstat.c:1446 ../route.c:90
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
- msgid ""
- "        -C, --cache              display routing cache instead of FIB\n"
- "\n"
- msgstr "         -C, --cache              místo FIB zobrazí smìrovací cache\n"
- 
--#: ../netstat.c:1448
-+#: ../netstat.c:1518
-+#, c-format
- msgid ""
--"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- msgstr ""
--"  <Soket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
--"--netrom\n"
-+"  <Soket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
- 
--#: ../netstat.c:1449 ../route.c:92
--#, c-format
--msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-+#: ../netstat.c:1519
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
- msgstr "   <AF>=Pou¾ijte '-A <af>' or '--<af>' Implicitní: %s\n"
- 
--#: ../netstat.c:1450 ../route.c:93
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
- msgid "  List of possible address families (which support routing):\n"
- msgstr "  Seznam mo¾ných tøíd adres (podporujících smìrování):\n"
- 
--#: ../netstat.c:1663
-+#: ../netstat.c:1753
-+#, c-format
- msgid "Active Internet connections "
- msgstr "Aktivní Internetová spojení "
- 
--#: ../netstat.c:1673
-+#: ../netstat.c:1763
-+#, c-format
- msgid ""
- "\n"
--"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
--"  "
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
- msgstr ""
- "\n"
- "Proto Pøích-F Odch-F Místní Adresa          Vzdálená Adresa         Stav     "
- 
--#: ../netstat.c:1675
-+#: ../netstat.c:1765
-+#, c-format
- msgid " User       Inode     "
- msgstr " U¾ivatel   I-uzel    "
- 
--#: ../netstat.c:1678
-+#: ../netstat.c:1768
-+#, c-format
- msgid " Timer"
- msgstr " Èasovaè"
- 
--#: ../netstat.c:1708
-+#: ../netstat.c:1798
-+#, c-format
- msgid "IPv4 Group Memberships\n"
- msgstr "Èlenství v IPv4 skupinách\n"
- 
--#: ../netstat.c:1709
-+#: ../netstat.c:1799
-+#, c-format
- msgid "Interface       RefCnt Group\n"
- msgstr "Rozhraní        Èítaè  Skupina\n"
- 
--#: ../rarp.c:43
-+#: ../rarp.c:44
- msgid "This kernel does not support RARP.\n"
- msgstr "Toto jádro nepodporuje RARP.\n"
- 
--#: ../rarp.c:82
-+#: ../rarp.c:83
- #, c-format
- msgid "no RARP entry for %s.\n"
- msgstr "pro %s neexistuje RARP polo¾ka.\n"
- 
--#: ../rarp.c:95
-+#: ../rarp.c:96
- #, c-format
- msgid "%s: bad hardware address\n"
- msgstr "hardwarová adresa %s je nesprávná\n"
- 
--#: ../rarp.c:127
-+#: ../rarp.c:128
- #, c-format
- msgid "rarp: cannot open file %s:%s.\n"
- msgstr "rarp: soubor %s:%s nelze otevøít.\n"
- 
--#: ../rarp.c:139
-+#: ../rarp.c:140
- #, c-format
- msgid "rarp: format error at %s:%u\n"
- msgstr "rarp: syntaktická chyba na øádku %2$u souboru %1$s\n"
- 
--#: ../rarp.c:143 ../rarp.c:287
-+#: ../rarp.c:144 ../rarp.c:289
- #, c-format
- msgid "rarp: %s: unknown host\n"
- msgstr "rarp: poèítaè %s není znám\n"
- 
--#: ../rarp.c:146
-+#: ../rarp.c:147
- #, c-format
- msgid "rarp: cannot set entry from %s:%u\n"
- msgstr "rarp: nelze nastavit polo¾ku z øádku %2$u souboru %1$s\n"
- 
--#: ../rarp.c:175
-+#: ../rarp.c:176
-+#, c-format
- msgid "Usage: rarp -a                               list entries in cache.\n"
- msgstr "Pou¾ití: rarp -a                            vypí¹e polo¾ky z cache.\n"
- 
--#: ../rarp.c:176
-+#: ../rarp.c:177
-+#, c-format
- msgid "       rarp -d <hostname>                    delete entry from cache.\n"
- msgstr "         rarp -d <jméno>                    sma¾e polo¾ku z cache.\n"
- 
--#: ../rarp.c:177
-+#: ../rarp.c:178
-+#, c-format
- msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
- msgstr ""
- "         rarp [<HW>] -s <jméno> <hwadr>       pøidá polo¾ku do cache.\n"
- 
--#: ../rarp.c:178
-+#: ../rarp.c:179
-+#, c-format
- msgid ""
- "       rarp -f                               add entries from /etc/ethers.\n"
- msgstr ""
- "         rarp -f                               pøidá polo¾ky z /etc/ethers.\n"
- 
--#: ../rarp.c:179
-+#: ../rarp.c:180
-+#, c-format
- msgid ""
- "       rarp -V                               display program version.\n"
- "\n"
-@@ -1279,24 +1266,26 @@
- "programu.\n"
- "\n"
- 
--#: ../rarp.c:236
-+#: ../rarp.c:238
- #, c-format
- msgid "%s: illegal option mix.\n"
- msgstr "Kombinace pøepínaèù %s je nesprávná.\n"
- 
--#: ../rarp.c:267
-+#: ../rarp.c:269
- #, c-format
- msgid "rarp: %s: unknown hardware type.\n"
- msgstr "rarp: hardwarový typ %s není znám.\n"
- 
--#: ../route.c:79
-+#: ../route.c:80
-+#, c-format
- msgid ""
- "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
- msgstr ""
- "Pou¾ití: route [-nNvee] [-FC] [<AF>]         Zobrazí smìrovací tabulky v "
- "jádru\n"
- 
--#: ../route.c:80
-+#: ../route.c:81
-+#, c-format
- msgid ""
- "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
- "\n"
-@@ -1305,14 +1294,16 @@
- "AF.\n"
- "\n"
- 
--#: ../route.c:82
-+#: ../route.c:83
-+#, c-format
- msgid ""
- "       route {-h|--help} [<AF>]              Detailed usage syntax for "
- "specified AF.\n"
- msgstr ""
- "       route {-h|--help [<AF>]               Nápovìda pro pou¾ití s AF.\n"
- 
--#: ../route.c:83
-+#: ../route.c:84
-+#, c-format
- msgid ""
- "       route {-V|--version}                  Display version/author and "
- "exit.\n"
-@@ -1321,15 +1312,23 @@
- "       route {-V|--version}                  Vypí¹e oznaèení verze a autora\n"
- "                                             programu.\n"
- 
-+#: ../route.c:92
-+#, fuzzy, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "   <AF>=Pou¾ijte '-A <af>' or '--<af>' Implicitní: %s\n"
-+
- #: ../plipconfig.c:66
-+#, c-format
- msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
- msgstr "Pou¾ití: plipconfig [-a] [-i] [-v] rozhraní\n"
- 
- #: ../plipconfig.c:67
-+#, c-format
- msgid "                  [nibble NN] [trigger NN]\n"
- msgstr "                  [nibble NN] [trigger NN]\n"
- 
- #: ../plipconfig.c:68
-+#, c-format
- msgid "       plipconfig -V | --version\n"
- msgstr "       plipconfig -V | --version\n"
- 
-@@ -1338,25 +1337,30 @@
- msgid "%s\tnibble %lu  trigger %lu\n"
- msgstr "%s\tnibble %lu  trigger %lu\n"
- 
--#: ../iptunnel.c:79
-+#: ../iptunnel.c:85
-+#, c-format
- msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
- msgstr "Pou¾ití: iptunnel { add | change | del | show } [ JMÉNO ]\n"
- 
--#: ../iptunnel.c:80
-+#: ../iptunnel.c:86
-+#, c-format
- msgid ""
- "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
- msgstr ""
- "          [ mode { ipip | gre | sit } ] [ vzdálená ADR ] [ místní ADR ]\n"
- 
--#: ../iptunnel.c:81
-+#: ../iptunnel.c:87
-+#, c-format
- msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
- msgstr "          [ [i|o]seq ] [ [i|o]key KLÍÈ ] [ [i|o]csum ]\n"
- 
--#: ../iptunnel.c:82
-+#: ../iptunnel.c:88
-+#, c-format
- msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
- msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev ZAØÍZENÍ ]\n"
- 
--#: ../iptunnel.c:83
-+#: ../iptunnel.c:89
-+#, c-format
- msgid ""
- "       iptunnel -V | --version\n"
- "\n"
-@@ -1364,450 +1368,737 @@
- "       iptunnel -V | --version\n"
- "\n"
- 
--#: ../iptunnel.c:84
-+#: ../iptunnel.c:90
-+#, c-format
- msgid "Where: NAME := STRING\n"
- msgstr "Kde: JMÉNO := ØETÌZEC\n"
- 
--#: ../iptunnel.c:85
-+#: ../iptunnel.c:91
-+#, c-format
- msgid "       ADDR := { IP_ADDRESS | any }\n"
- msgstr "       ADR := { IP-ADRESA | any }\n"
- 
--#: ../iptunnel.c:86
-+#: ../iptunnel.c:92
-+#, c-format
- msgid "       TOS  := { NUMBER | inherit }\n"
- msgstr "       TOS  := { ÈÍSLO | inherit }\n"
- 
--#: ../iptunnel.c:87
-+#: ../iptunnel.c:93
-+#, c-format
- msgid "       TTL  := { 1..255 | inherit }\n"
- msgstr "       TTL  := { 1..255 | inherit }\n"
- 
--#: ../iptunnel.c:88
-+#: ../iptunnel.c:94
-+#, c-format
- msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
- msgstr "       KLÍÈ  := { DOTTED_QUAD | ÈÍSLO }\n"
- 
--#: ../iptunnel.c:326
-+#: ../iptunnel.c:332
-+#, c-format
- msgid "Keys are not allowed with ipip and sit.\n"
- msgstr "S ipip a sit nejsou klíèe povoleny.\n"
- 
--#: ../iptunnel.c:346
-+#: ../iptunnel.c:352
-+#, c-format
- msgid "Broadcast tunnel requires a source address.\n"
- msgstr "Tunel se v¹esmìrovým vysíláním vy¾aduje zdrojovou adresu.\n"
- 
--#: ../iptunnel.c:361
-+#: ../iptunnel.c:367
-+#, c-format
- msgid "ttl != 0 and noptmudisc are incompatible\n"
- msgstr "ttl != 0 a noptmudisc se navzájem vyluèují\n"
- 
--#: ../iptunnel.c:373
-+#: ../iptunnel.c:379
-+#, c-format
- msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
- msgstr "re¾im tunelu (ipip, gre èi sit) nelze zjistit\n"
- 
--#: ../iptunnel.c:411
-+#: ../iptunnel.c:417
- #, c-format
- msgid "%s: %s/ip  remote %s  local %s "
- msgstr "%s: %s/ip  vzdálený %s  místní %s "
- 
--#: ../iptunnel.c:415
-+#: ../iptunnel.c:421
- msgid "unknown"
- msgstr "Neznám."
- 
--#: ../iptunnel.c:447
-+#: ../iptunnel.c:453
-+#, c-format
- msgid "  Drop packets out of sequence.\n"
- msgstr "  Zahazuje pakety mimo poøadí.\n"
- 
--#: ../iptunnel.c:449
-+#: ../iptunnel.c:455
-+#, c-format
- msgid "  Checksum in received packet is required.\n"
- msgstr "  Pøijímané pakety musí mít kontrolní souèet.\n"
- 
- # ???
--#: ../iptunnel.c:451
-+#: ../iptunnel.c:457
-+#, c-format
- msgid "  Sequence packets on output.\n"
- msgstr "  Øadí odchozí pakety.\n"
- 
--#: ../iptunnel.c:453
-+#: ../iptunnel.c:459
-+#, c-format
- msgid "  Checksum output packets.\n"
- msgstr "  Odchozí pakety budou mít kontrolní souèet.\n"
- 
--#: ../iptunnel.c:481
-+#: ../iptunnel.c:487
-+#, c-format
- msgid "Wrong format of /proc/net/dev. Sorry.\n"
- msgstr "Lituji, formát /proc/net/dev je chybný.\n"
- 
--#: ../iptunnel.c:494
-+#: ../iptunnel.c:500
- #, c-format
- msgid "Failed to get type of [%s]\n"
- msgstr "Typ [%s] se nepodaøilo zjistit.\n"
- 
--#: ../iptunnel.c:510
-+#: ../iptunnel.c:516
-+#, c-format
- msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
- msgstr "RX: Pakety     Bajty        Chyby  CsumChyb MimoPoø  Mcasts\n"
- 
--#: ../iptunnel.c:513
-+#: ../iptunnel.c:519
-+#, c-format
- msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
- msgstr "TX: Pakety     Bajty        Chyby  DeadLoop NoRoute  NoBufs\n"
- 
--#: ../statistics.c:45
-+#: ../statistics.c:47
- msgid "ICMP input histogram:"
- msgstr "histogram ICMP vstupu:"
- 
--#: ../statistics.c:46
-+#: ../statistics.c:48
- msgid "ICMP output histogram:"
- msgstr "histogram ICMP výstupu:"
- 
--#: ../statistics.c:63
-+#: ../statistics.c:65
- #, c-format
- msgid "Forwarding is %s"
- msgstr "Pøedávání je %s"
- 
--#: ../statistics.c:64
--#, c-format
--msgid "Default TTL is %d"
-+#: ../statistics.c:66
-+#, fuzzy, c-format
-+msgid "Default TTL is %u"
- msgstr "Implicitní TTL je %d"
- 
--#: ../statistics.c:65
--#, c-format
--msgid "%d total packets received"
-+#: ../statistics.c:67
-+#, fuzzy, c-format
-+msgid "%u total packets received"
- msgstr "celkem pøijmutých paketù: %d"
- 
--#: ../statistics.c:66
--#, c-format
--msgid "%d with invalid headers"
-+#: ../statistics.c:68
-+#, fuzzy, c-format
-+msgid "%u with invalid headers"
- msgstr "s nesprávnými hlavièkami: %d"
- 
--#: ../statistics.c:67
--#, c-format
--msgid "%d with invalid addresses"
-+#: ../statistics.c:69
-+#, fuzzy, c-format
-+msgid "%u with invalid addresses"
- msgstr "s nesprávnými adresami: %d"
- 
--#: ../statistics.c:68
--#, c-format
--msgid "%d forwarded"
-+#: ../statistics.c:70
-+#, fuzzy, c-format
-+msgid "%u forwarded"
- msgstr "pøedáno: %d"
- 
--#: ../statistics.c:69
--#, c-format
--msgid "%d with unknown protocol"
-+#: ../statistics.c:71
-+#, fuzzy, c-format
-+msgid "%u with unknown protocol"
- msgstr "s neznámým protokolem: %d"
- 
--#: ../statistics.c:70
--#, c-format
--msgid "%d incoming packets discarded"
-+#: ../statistics.c:72
-+#, fuzzy, c-format
-+msgid "%u incoming packets discarded"
- msgstr "poèet zahozených pøíchozích paketù: %d"
- 
--#: ../statistics.c:71
--#, c-format
--msgid "%d incoming packets delivered"
-+#: ../statistics.c:73
-+#, fuzzy, c-format
-+msgid "%u incoming packets delivered"
- msgstr "poèet doruèených pøíchozích paketù: %d"
- 
--#: ../statistics.c:72
--#, c-format
--msgid "%d requests sent out"
-+#: ../statistics.c:74
-+#, fuzzy, c-format
-+msgid "%u requests sent out"
- msgstr "poèet odeslaných po¾adavkù: %d"
- 
- #. ?
--#: ../statistics.c:73
--#, c-format
--msgid "%d outgoing packets dropped"
-+#: ../statistics.c:75
-+#, fuzzy, c-format
-+msgid "%u outgoing packets dropped"
- msgstr "poèet zahozených odchozích paketù: %d"
- 
--#: ../statistics.c:74
--#, c-format
--msgid "%d dropped because of missing route"
-+#: ../statistics.c:76
-+#, fuzzy, c-format
-+msgid "%u dropped because of missing route"
- msgstr "zahozeno kvùli chybìjící cestì: %d"
- 
--#: ../statistics.c:75
--#, c-format
--msgid "%d fragments dropped after timeout"
-+#: ../statistics.c:77
-+#, fuzzy, c-format
-+msgid "%u fragments dropped after timeout"
- msgstr "poèet fragmentù zahozených po vypr¹ení èasu: %d"
- 
--#: ../statistics.c:76
--#, c-format
--msgid "%d reassemblies required"
-+#: ../statistics.c:78
-+#, fuzzy, c-format
-+msgid "%u reassemblies required"
- msgstr "poèet nutných znovusestavení: %d"
- 
- #. ?
--#: ../statistics.c:77
--#, c-format
--msgid "%d packets reassembled ok"
-+#: ../statistics.c:79
-+#, fuzzy, c-format
-+msgid "%u packets reassembled ok"
- msgstr "poèet v poøádku znovu sestavených paketù: %d"
- 
--#: ../statistics.c:78
--#, c-format
--msgid "%d packet reassembles failed"
-+#: ../statistics.c:80
-+#, fuzzy, c-format
-+msgid "%u packet reassembles failed"
- msgstr "poèet paketù, je¾ se nepodaøilo znovu sestavit: %d"
- 
--#: ../statistics.c:79
--#, c-format
--msgid "%d fragments received ok"
-+#: ../statistics.c:81
-+#, fuzzy, c-format
-+msgid "%u fragments received ok"
- msgstr "poèet v poøádku pøijmutých fragmentù: %d"
- 
--#: ../statistics.c:80
--#, c-format
--msgid "%d fragments failed"
-+#: ../statistics.c:82
-+#, fuzzy, c-format
-+msgid "%u fragments failed"
- msgstr "poèet chybných fragmentù: %d"
- 
--#: ../statistics.c:81
--#, c-format
--msgid "%d fragments created"
-+#: ../statistics.c:83
-+#, fuzzy, c-format
-+msgid "%u fragments created"
- msgstr "poèet vytvoøených fragmentù: %d"
- 
--#: ../statistics.c:86
--#, c-format
--msgid "%d ICMP messages received"
-+#: ../statistics.c:88
-+#, fuzzy, c-format
-+msgid "%u ICMP messages received"
- msgstr "poèet pøijmutých ICMP zpráv: %d"
- 
--#: ../statistics.c:87
--#, c-format
--msgid "%d input ICMP message failed."
-+#: ../statistics.c:89
-+#, fuzzy, c-format
-+msgid "%u input ICMP message failed."
- msgstr "poèet chybných pøíchozích ICMP zpráv: %d"
- 
--#: ../statistics.c:88 ../statistics.c:101
--#, c-format
--msgid "destination unreachable: %d"
-+#: ../statistics.c:90 ../statistics.c:103
-+#, fuzzy, c-format
-+msgid "destination unreachable: %u"
- msgstr "adresát nedostupný: %d"
- 
--#: ../statistics.c:89
--#, c-format
--msgid "timeout in transit: %d"
-+#: ../statistics.c:91
-+#, fuzzy, c-format
-+msgid "timeout in transit: %u"
- msgstr "vypr¹el èas pøi pøenosu: %d"
- 
--#: ../statistics.c:90 ../statistics.c:103
--#, c-format
--msgid "wrong parameters: %d"
-+#: ../statistics.c:92 ../statistics.c:105
-+#, fuzzy, c-format
-+msgid "wrong parameters: %u"
- msgstr "chybné parametry: %d"
- 
- #. ?
--#: ../statistics.c:91
--#, c-format
--msgid "source quenchs: %d"
-+#: ../statistics.c:93
-+#, fuzzy, c-format
-+msgid "source quenches: %u"
- msgstr "øízení toku dat: %d"
- 
--#: ../statistics.c:92
--#, c-format
--msgid "redirects: %d"
-+#: ../statistics.c:94
-+#, fuzzy, c-format
-+msgid "redirects: %u"
- msgstr "zmìna cesty: %d"
- 
--#: ../statistics.c:93
--#, c-format
--msgid "echo requests: %d"
-+#: ../statistics.c:95
-+#, fuzzy, c-format
-+msgid "echo requests: %u"
- msgstr "¾ádost o echo: %d"
- 
--#: ../statistics.c:94 ../statistics.c:107
--#, c-format
--msgid "echo replies: %d"
-+#: ../statistics.c:96 ../statistics.c:109
-+#, fuzzy, c-format
-+msgid "echo replies: %u"
- msgstr "odpovìï na ¾ádost o echo: %d"
- 
--#: ../statistics.c:95
--#, c-format
--msgid "timestamp request: %d"
-+#: ../statistics.c:97
-+#, fuzzy, c-format
-+msgid "timestamp request: %u"
- msgstr "¾ádost o èas: %d"
- 
--#: ../statistics.c:96
--#, c-format
--msgid "timestamp reply: %d"
-+#: ../statistics.c:98
-+#, fuzzy, c-format
-+msgid "timestamp reply: %u"
- msgstr "odpovìï na ¾ádost o èas: %d"
- 
--#: ../statistics.c:97
--#, c-format
--msgid "address mask request: %d"
-+#: ../statistics.c:99
-+#, fuzzy, c-format
-+msgid "address mask request: %u"
- msgstr "¾ádost o masku podsítì: %d"
- 
- #. ?
--#: ../statistics.c:98
--msgid "address mask replies"
--msgstr "odpovìdi na ¾ádost o masku podsítì"
-+#: ../statistics.c:100 ../statistics.c:113
-+#, fuzzy, c-format
-+msgid "address mask replies: %u"
-+msgstr "odpovìï na ¾ádost o masku podsítì: %d"
- 
- #. ?
--#: ../statistics.c:99
--#, c-format
--msgid "%d ICMP messages sent"
-+#: ../statistics.c:101
-+#, fuzzy, c-format
-+msgid "%u ICMP messages sent"
- msgstr "poèet odeslaných ICMP zpráv: %d"
- 
--#: ../statistics.c:100
--#, c-format
--msgid "%d ICMP messages failed"
-+#: ../statistics.c:102
-+#, fuzzy, c-format
-+msgid "%u ICMP messages failed"
- msgstr "poèet chybných ICMP zpráv: %d"
- 
--#: ../statistics.c:102
--#, c-format
--msgid "time exceeded: %d"
-+#: ../statistics.c:104
-+#, fuzzy, c-format
-+msgid "time exceeded: %u"
- msgstr "vypr¹ení ¾ivotnosti: %d"
- 
- #. ?
--#: ../statistics.c:104
--#, c-format
--msgid "source quench: %d"
-+#: ../statistics.c:106
-+#, fuzzy, c-format
-+msgid "source quench: %u"
- msgstr "øízení toku dat: %d"
- 
--#: ../statistics.c:105
--#, c-format
--msgid "redirect: %d"
-+#: ../statistics.c:107
-+#, fuzzy, c-format
-+msgid "redirect: %u"
- msgstr "zmìna cesty: %d"
- 
--#: ../statistics.c:106
--#, c-format
--msgid "echo request: %d"
-+#: ../statistics.c:108
-+#, fuzzy, c-format
-+msgid "echo request: %u"
- msgstr "¾ádost o echo: %d"
- 
--#: ../statistics.c:108
--#, c-format
--msgid "timestamp requests: %d"
-+#: ../statistics.c:110
-+#, fuzzy, c-format
-+msgid "timestamp requests: %u"
- msgstr "¾ádost o èas: %d"
- 
--#: ../statistics.c:109
--#, c-format
--msgid "timestamp replies: %d"
-+#: ../statistics.c:111
-+#, fuzzy, c-format
-+msgid "timestamp replies: %u"
- msgstr "odpovìï na ¾ádost o èas: %d"
- 
--#: ../statistics.c:110
--#, c-format
--msgid "address mask requests: %d"
-+#: ../statistics.c:112
-+#, fuzzy, c-format
-+msgid "address mask requests: %u"
- msgstr "¾ádost o masku podsítì: %d"
- 
--#: ../statistics.c:111
--#, c-format
--msgid "address mask replies: %d"
--msgstr "odpovìï na ¾ádost o masku podsítì: %d"
--
--#: ../statistics.c:116
-+#: ../statistics.c:118
- #, c-format
- msgid "RTO algorithm is %s"
- msgstr "RTO algoritmus je %s"
- 
--#: ../statistics.c:120
--#, c-format
--msgid "%d active connections openings"
-+#: ../statistics.c:122
-+#, fuzzy, c-format
-+msgid "%u active connections openings"
- msgstr "poèet aktivnì navázaných spojení: %d"
- 
--#: ../statistics.c:121
--#, c-format
--msgid "%d passive connection openings"
-+#: ../statistics.c:123
-+#, fuzzy, c-format
-+msgid "%u passive connection openings"
- msgstr "poèet pasivnì navázaných spojení: %d"
- 
--#: ../statistics.c:122
--#, c-format
--msgid "%d failed connection attempts"
-+#: ../statistics.c:124
-+#, fuzzy, c-format
-+msgid "%u failed connection attempts"
- msgstr "poèet neúspì¹ných pokusù o spojení: %d"
- 
--#: ../statistics.c:123
--#, c-format
--msgid "%d connection resets received"
-+#: ../statistics.c:125
-+#, fuzzy, c-format
-+msgid "%u connection resets received"
- msgstr "poèet pøijmutých resetù: %d"
- 
--#: ../statistics.c:124
--#, c-format
--msgid "%d connections established"
-+#: ../statistics.c:126
-+#, fuzzy, c-format
-+msgid "%u connections established"
- msgstr "poèet navázaných spojení: %d"
- 
--#: ../statistics.c:125
--#, c-format
--msgid "%d segments received"
-+#: ../statistics.c:127
-+#, fuzzy, c-format
-+msgid "%u segments received"
- msgstr "poèet pøijmutých segmentù: %d"
- 
--#: ../statistics.c:126
--#, c-format
--msgid "%d segments send out"
-+#: ../statistics.c:128
-+#, fuzzy, c-format
-+msgid "%u segments send out"
- msgstr "poèet odeslaných segmentù: %d"
- 
--#: ../statistics.c:127
--#, c-format
--msgid "%d segments retransmited"
-+#: ../statistics.c:129
-+#, fuzzy, c-format
-+msgid "%u segments retransmited"
- msgstr "poèet pøenesených segmentù: %d"
- 
--#: ../statistics.c:128
--#, c-format
--msgid "%d bad segments received."
-+#: ../statistics.c:130
-+#, fuzzy, c-format
-+msgid "%u bad segments received."
- msgstr "poèet chybných pøíchozích segmentù: %d."
- 
--#: ../statistics.c:129
--#, c-format
--msgid "%d resets sent"
-+#: ../statistics.c:131
-+#, fuzzy, c-format
-+msgid "%u resets sent"
- msgstr "poèet odeslaných resetù: %d"
- 
--#: ../statistics.c:134
--#, c-format
--msgid "%d packets received"
-+#: ../statistics.c:136
-+#, fuzzy, c-format
-+msgid "%u packets received"
- msgstr "poèet pøijmutých paketù: %d"
- 
--#: ../statistics.c:135
--#, c-format
--msgid "%d packets to unknown port received."
-+#: ../statistics.c:137
-+#, fuzzy, c-format
-+msgid "%u packets to unknown port received."
- msgstr "poèet paketù pøijmutých pro neznámý port: %d."
- 
--#: ../statistics.c:136
--#, c-format
--msgid "%d packet receive errors"
-+#: ../statistics.c:138
-+#, fuzzy, c-format
-+msgid "%u packet receive errors"
- msgstr "poèet chyb pøi pøíjmu paketù: %d"
- 
--#: ../statistics.c:137
--#, c-format
--msgid "%d packets sent"
-+#: ../statistics.c:139
-+#, fuzzy, c-format
-+msgid "%u packets sent"
- msgstr "poèet odeslaných paketù: %d"
- 
--#: ../statistics.c:142
--#, c-format
--msgid "%d SYN cookies sent"
-+#: ../statistics.c:144
-+#, fuzzy, c-format
-+msgid "%u SYN cookies sent"
- msgstr "poèet odeslaných SYN cookies: %d"
- 
--#: ../statistics.c:143
--#, c-format
--msgid "%d SYN cookies received"
-+#: ../statistics.c:145
-+#, fuzzy, c-format
-+msgid "%u SYN cookies received"
- msgstr "poèet pøijmutých SYN cookies: %d"
- 
--#: ../statistics.c:144
--#, c-format
--msgid "%d invalid SYN cookies received"
-+#: ../statistics.c:146
-+#, fuzzy, c-format
-+msgid "%u invalid SYN cookies received"
- msgstr "poèet chybných pøíchozích SYN cookies: %d"
- 
--#: ../statistics.c:146
--#, c-format
--msgid "%d resets received for embryonic SYN_RECV sockets"
-+#: ../statistics.c:148
-+#, fuzzy, c-format
-+msgid "%u resets received for embryonic SYN_RECV sockets"
- msgstr "poèet resetù pøijmutých pro sokety ve stavu SYN_PØÍCH: %d"
- 
--#: ../statistics.c:148
--#, c-format
--msgid "%d packets pruned from receive queue because of socket buffer overrun"
-+#: ../statistics.c:150
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue because of socket buffer overrun"
- msgstr "poèet paketù odstranìných z fronty kvùli pøeteèení bufferu soketu: %d"
- 
- #. obsolete: 2.2.0 doesn't do that anymore
--#: ../statistics.c:151
--#, c-format
--msgid "%d packets pruned from out-of-order queue"
-+#: ../statistics.c:153
-+#, fuzzy, c-format
-+msgid "%u packets pruned from receive queue"
- msgstr "poèet paketù odstranìných z fronty mimo-poøadí: %d"
- 
--#: ../statistics.c:152
--#, c-format
-+#: ../statistics.c:154
-+#, fuzzy, c-format
- msgid ""
--"%d packets dropped from out-of-order queue because of socket buffer overrun"
-+"%u packets dropped from out-of-order queue because of socket buffer overrun"
- msgstr ""
- "poèet paketù zahozených z fronty mimo-poøadí kvùli pøeteèení bufferu soketu: "
- "%d"
- 
--#: ../statistics.c:154
--#, c-format
--msgid "%d ICMP packets dropped because they were out-of-window"
-+#: ../statistics.c:156
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because they were out-of-window"
- msgstr "poèet ICMP paketù zahozených, proto¾e byly mimo-okno: %d"
- 
--#: ../statistics.c:156
--#, c-format
--msgid "%d ICMP packets dropped because socket was locked"
-+#: ../statistics.c:158
-+#, fuzzy, c-format
-+msgid "%u ICMP packets dropped because socket was locked"
- msgstr "poèet ICMP paketù zahozených kvùli zamèenému soketu: %d"
- 
-+#: ../statistics.c:160
-+#, c-format
-+msgid "%u TCP sockets finished time wait in fast timer"
-+msgstr ""
-+
-+#: ../statistics.c:161
-+#, c-format
-+msgid "%u time wait sockets recycled by time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:162
-+#, c-format
-+msgid "%u TCP sockets finished time wait in slow timer"
-+msgstr ""
-+
-+#: ../statistics.c:163
-+#, c-format
-+msgid "%u passive connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:165
-+#, c-format
-+msgid "%u active connections rejected because of time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:167
-+#, c-format
-+msgid "%u packets rejects in established connections because of timestamp"
-+msgstr ""
-+
-+#: ../statistics.c:169
-+#, fuzzy, c-format
-+msgid "%u delayed acks sent"
-+msgstr "poèet odeslaných paketù: %d"
-+
-+#: ../statistics.c:170
-+#, c-format
-+msgid "%u delayed acks further delayed because of locked socket"
-+msgstr ""
-+
-+#: ../statistics.c:172
-+#, c-format
-+msgid "Quick ack mode was activated %u times"
-+msgstr ""
-+
-+#: ../statistics.c:173
-+#, c-format
-+msgid "%u times the listen queue of a socket overflowed"
-+msgstr ""
-+
-+#: ../statistics.c:175
-+#, c-format
-+msgid "%u SYNs to LISTEN sockets ignored"
-+msgstr ""
-+
-+#: ../statistics.c:176
-+#, c-format
-+msgid "%u packets directly queued to recvmsg prequeue."
-+msgstr ""
-+
-+#: ../statistics.c:178
-+#, c-format
-+msgid "%u of bytes directly received from backlog"
-+msgstr ""
-+
-+#: ../statistics.c:180
-+#, c-format
-+msgid "%u of bytes directly received from prequeue"
-+msgstr ""
-+
-+#: ../statistics.c:182
-+#, fuzzy, c-format
-+msgid "%u packets dropped from prequeue"
-+msgstr "poèet paketù odstranìných z fronty mimo-poøadí: %d"
-+
-+#: ../statistics.c:183
-+#, fuzzy, c-format
-+msgid "%u packet headers predicted"
-+msgstr "poèet pøijmutých paketù: %d"
-+
-+#: ../statistics.c:184
-+#, c-format
-+msgid "%u packets header predicted and directly queued to user"
-+msgstr ""
-+
-+#: ../statistics.c:186
-+#, c-format
-+msgid "Ran %u times out of system memory during packet sending"
-+msgstr ""
-+
-+#: ../statistics.c:188
-+#, fuzzy, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr "poèet paketù pøijmutých pro neznámý port: %d."
-+
-+#: ../statistics.c:189
-+#, c-format
-+msgid "%u predicted acknowledgments"
-+msgstr ""
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr ""
-+
-+#: ../statistics.c:192
-+#, fuzzy, c-format
-+msgid "%u bad SACKs received"
-+msgstr "poèet chybných pøíchozích segmentù: %d."
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr ""
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr ""
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr ""
-+
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:197
-+#, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr ""
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr ""
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr ""
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr ""
-+
-+#: ../statistics.c:201
-+#, fuzzy, c-format
-+msgid "%u retransmits lost"
-+msgstr "poèet odeslaných resetù: %d"
-+
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr ""
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr ""
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr ""
-+
-+#: ../statistics.c:205
-+#, fuzzy, c-format
-+msgid "%u fast retransmits"
-+msgstr "poèet pøenesených segmentù: %d"
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr ""
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr ""
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr ""
-+
-+#: ../statistics.c:209
-+#, fuzzy, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "poèet pøenesených segmentù: %d"
-+
-+#: ../statistics.c:210
-+#, fuzzy, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "poèet paketù, je¾ se nepodaøilo znovu sestavit: %d"
-+
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr ""
-+
-+#: ../statistics.c:212
-+#, fuzzy, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr "poèet paketù odstranìných z fronty kvùli pøeteèení bufferu soketu: %d"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr ""
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr ""
-+
-+#: ../statistics.c:215
-+#, fuzzy, c-format
-+msgid "%u DSACKs received"
-+msgstr "poèet pøijmutých paketù: %d"
-+
-+#: ../statistics.c:216
-+#, fuzzy, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "celkem pøijmutých paketù: %d"
-+
-+#: ../statistics.c:217
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "poèet pøijmutých resetù: %d"
-+
-+#: ../statistics.c:218
-+#, fuzzy, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "poèet pøijmutých resetù: %d"
-+
-+#: ../statistics.c:219
-+#, fuzzy, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "poèet pøijmutých resetù: %d"
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr ""
-+
-+#: ../statistics.c:221
-+#, fuzzy, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "poèet pøijmutých resetù: %d"
-+
- #: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr ""
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr ""
-+
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr ""
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr ""
-+
-+#: ../statistics.c:292
- msgid "enabled"
- msgstr "zapnuto"
- 
--#: ../statistics.c:222
-+#: ../statistics.c:292
- msgid "disabled"
- msgstr "vypnuto"
- 
--#: ../statistics.c:272
--#, c-format
--msgid "unknown title %s\n"
--msgstr "titulek %s je neznámý\n"
--
--#: ../statistics.c:298
-+#: ../statistics.c:375
- msgid "error parsing /proc/net/snmp"
- msgstr "chyba pøi zpracování /proc/net/snmp"
- 
--#: ../statistics.c:311
-+#: ../statistics.c:388
- msgid "cannot open /proc/net/snmp"
- msgstr "/proc/net/snmp nelze otevøít"
- 
-@@ -1821,89 +2112,95 @@
- msgid "Cannot change line discipline to `%s'.\n"
- msgstr "Linkovou disciplínu nelze na `%s' zmìnit.\n"
- 
--#: ../lib/af.c:145 ../lib/hw.c:148
-+#: ../lib/af.c:153 ../lib/hw.c:161
- msgid "UNSPEC"
- msgstr "NEZNÁM"
- 
--#: ../lib/af.c:147
-+#: ../lib/af.c:155
- msgid "UNIX Domain"
- msgstr "Doména UNIX"
- 
--#: ../lib/af.c:150
-+#: ../lib/af.c:158
- msgid "DARPA Internet"
- msgstr "DARPA Internet"
- 
--#: ../lib/af.c:153
-+#: ../lib/af.c:161
- msgid "IPv6"
- msgstr "IPv6"
- 
--#: ../lib/af.c:156 ../lib/hw.c:169
-+#: ../lib/af.c:164 ../lib/hw.c:182
- msgid "AMPR AX.25"
- msgstr "AMPR AX.25"
- 
--#: ../lib/af.c:159 ../lib/hw.c:175
-+#: ../lib/af.c:167 ../lib/hw.c:188
- msgid "AMPR NET/ROM"
- msgstr "AMPR NET/ROM"
- 
--#: ../lib/af.c:162
-+#: ../lib/af.c:170
- msgid "Novell IPX"
- msgstr "Novell IPX"
- 
--#: ../lib/af.c:165
-+#: ../lib/af.c:173
- msgid "Appletalk DDP"
- msgstr "Appletalk DDP"
- 
--#: ../lib/af.c:168 ../lib/hw.c:207
-+#: ../lib/af.c:176 ../lib/hw.c:223
- msgid "Econet"
- msgstr "Econet"
- 
--#: ../lib/af.c:171 ../lib/hw.c:172
-+#: ../lib/af.c:179
-+msgid "CCITT X.25"
-+msgstr ""
-+
-+#: ../lib/af.c:182 ../lib/hw.c:185
- msgid "AMPR ROSE"
- msgstr "AMPR ROSE"
- 
--#: ../lib/af.c:174 ../lib/hw.c:160
-+#: ../lib/af.c:185 ../lib/hw.c:173
- msgid "Ash"
- msgstr "Ash"
- 
--#: ../lib/af.c:232
-+#: ../lib/af.c:243
-+#, c-format
- msgid "Please don't supply more than one address family.\n"
- msgstr "Nezadávejte více ne¾ jednu tøídu adres.\n"
- 
--#: ../lib/af.c:293
-+#: ../lib/af.c:304
-+#, c-format
- msgid "Too much address family arguments.\n"
- msgstr "Bylo zadáno pøíli¹ mnoho tøíd adres.\n"
- 
--#: ../lib/af.c:304
-+#: ../lib/af.c:315
- #, c-format
- msgid "Unknown address family `%s'.\n"
- msgstr "Tøída adres `%s' není známa.\n"
- 
--#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
--#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
--#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
--#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
--msgid "[NONE SET]"
--msgstr "[NENASTAVENO]"
--
--#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-+#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
- #, c-format
- msgid "in_arcnet(%s): invalid arcnet address!\n"
- msgstr "in_arcnet(%s): chybná arcnet adresa!\n"
- 
--#: ../lib/arcnet.c:108
-+#: ../lib/arcnet.c:97
- #, c-format
- msgid "in_arcnet(%s): trailing : ignored!\n"
- msgstr "in_arcnet(%s): nadbyteèné : ignorováno!\n"
- 
--#: ../lib/arcnet.c:120
-+#: ../lib/arcnet.c:109
- #, c-format
- msgid "in_arcnet(%s): trailing junk!\n"
- msgstr "in_arcnet(%s): nadbyteèné znaky!\n"
- 
- #: ../lib/ash.c:81
-+#, c-format
- msgid "Malformed Ash address"
- msgstr "Chybná Ash adresa"
- 
-+#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-+#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-+#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-+msgid "[NONE SET]"
-+msgstr "[NENASTAVENO]"
-+
- #: ../lib/ax25.c:97 ../lib/netrom.c:100
- msgid "Invalid callsign"
- msgstr "Nesprávný volací znak"
-@@ -1913,22 +2210,21 @@
- msgstr "Volací znak je pøíli¹ dlouhý."
- 
- #: ../lib/ax25_gr.c:47
-+#, c-format
- msgid "AX.25 not configured in this system.\n"
- msgstr "AX.25 není na tomto systému nakonfigurováno.\n"
- 
- #: ../lib/ax25_gr.c:50
-+#, c-format
- msgid "Kernel AX.25 routing table\n"
- msgstr "Smìrovací tabulka v jádru pro AX.25\n"
- 
- #. xxx
- #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
- msgid "Destination  Iface    Use\n"
- msgstr "Adresát      Rozhraní U¾ití\n"
- 
--#: ../lib/ddp_gr.c:21
--msgid "Routing table for `ddp' not yet supported.\n"
--msgstr "Smìrovací tabulka pro `ddp' není zatím podporována.\n"
--
- #: ../lib/ether.c:74 ../lib/ether.c:91
- #, c-format
- msgid "in_ether(%s): invalid ether address!\n"
-@@ -1944,153 +2240,171 @@
- msgid "in_ether(%s): trailing junk!\n"
- msgstr "in_ether(%s): nadbyteèné znaky!\n"
- 
--#: ../lib/fddi.c:95 ../lib/fddi.c:110
-+#: ../lib/fddi.c:84 ../lib/fddi.c:99
- #, c-format
- msgid "in_fddi(%s): invalid fddi address!\n"
- msgstr "in_fddi(%s): chybná fddi adresa!\n"
- 
--#: ../lib/fddi.c:122
-+#: ../lib/fddi.c:111
- #, c-format
- msgid "in_fddi(%s): trailing : ignored!\n"
- msgstr "in_fddi(%s): nadbyteèné : ignorováno!\n"
- 
--#: ../lib/fddi.c:134
-+#: ../lib/fddi.c:123
- #, c-format
- msgid "in_fddi(%s): trailing junk!\n"
- msgstr "in_fddi(%s): nadbyteèné znaky!\n"
- 
--#: ../lib/getroute.c:97 ../lib/setroute.c:76
-+#: ../lib/getroute.c:101 ../lib/setroute.c:80
- #, c-format
- msgid "Address family `%s' not supported.\n"
- msgstr "Tøída adres `%s' není podporována.\n"
- 
--#: ../lib/getroute.c:103 ../lib/setroute.c:80
-+#: ../lib/getroute.c:107 ../lib/setroute.c:84
- #, c-format
- msgid "No routing for address family `%s'.\n"
- msgstr "Pro tøídu adres `%s' není ¾ádné smìrování.\n"
- 
--#: ../lib/hippi.c:96 ../lib/hippi.c:111
-+#: ../lib/hippi.c:84 ../lib/hippi.c:99
- #, c-format
- msgid "in_hippi(%s): invalid hippi address!\n"
- msgstr "in_hippi(%s): chybná hippi adresa!\n"
- 
--#: ../lib/hippi.c:123
-+#: ../lib/hippi.c:111
- #, c-format
- msgid "in_hippi(%s): trailing : ignored!\n"
- msgstr "in_hippi(%s): nadbyteèné : ignorováno!\n"
- 
--#: ../lib/hippi.c:134
-+#: ../lib/hippi.c:122
- #, c-format
- msgid "in_hippi(%s): trailing junk!\n"
- msgstr "in_hippi(%s): nadbyteèné znaky!\n"
- 
--#: ../lib/hw.c:147
-+#: ../lib/hw.c:160
- msgid "Local Loopback"
- msgstr "Místní smyèka"
- 
--#: ../lib/hw.c:150
-+#: ../lib/hw.c:163
- msgid "Serial Line IP"
- msgstr "IP po sériové lince"
- 
--#: ../lib/hw.c:151
-+#: ../lib/hw.c:164
- msgid "VJ Serial Line IP"
- msgstr "Vj IP po sériové lince"
- 
--#: ../lib/hw.c:152
-+#: ../lib/hw.c:165
- msgid "6-bit Serial Line IP"
- msgstr "6bitový IP po sériové lince"
- 
--#: ../lib/hw.c:153
-+#: ../lib/hw.c:166
- msgid "VJ 6-bit Serial Line IP"
- msgstr "6bitový VJ IP po sériové lince"
- 
--#: ../lib/hw.c:154
-+#: ../lib/hw.c:167
- msgid "Adaptive Serial Line IP"
- msgstr "Adaptivní IP po sériové lince"
- 
--#: ../lib/hw.c:157
-+#: ../lib/hw.c:170
- msgid "Ethernet"
- msgstr "Ethernet"
- 
--#: ../lib/hw.c:163
-+#: ../lib/hw.c:176
- msgid "Fiber Distributed Data Interface"
- msgstr "Fiber Distributed Data Interface"
- 
--#: ../lib/hw.c:166
-+#: ../lib/hw.c:179
- msgid "HIPPI"
- msgstr "HIPPI"
- 
--#: ../lib/hw.c:178
-+#: ../lib/hw.c:191
-+msgid "generic X.25"
-+msgstr ""
-+
-+#: ../lib/hw.c:194
- msgid "IPIP Tunnel"
- msgstr "IPIP Tunnel"
- 
--#: ../lib/hw.c:181
-+#: ../lib/hw.c:197
- msgid "Point-to-Point Protocol"
- msgstr "Point-to-Point Protokol"
- 
--#: ../lib/hw.c:184
-+#: ../lib/hw.c:200
- msgid "(Cisco)-HDLC"
- msgstr "(Cisco)-HDLC"
- 
--#: ../lib/hw.c:185
-+#: ../lib/hw.c:201
- msgid "LAPB"
- msgstr "LAPB"
- 
--#: ../lib/hw.c:188
-+#: ../lib/hw.c:204
- msgid "ARCnet"
- msgstr "ARCnet"
- 
--#: ../lib/hw.c:191
-+#: ../lib/hw.c:207
- msgid "Frame Relay DLCI"
- msgstr "Frame Relay DLCI"
- 
--#: ../lib/hw.c:192
-+#: ../lib/hw.c:208
- msgid "Frame Relay Access Device"
- msgstr "Pøístupové zaøízení Frame Relay"
- 
--#: ../lib/hw.c:195
-+#: ../lib/hw.c:211
- msgid "IPv6-in-IPv4"
- msgstr "IPv6-in-IPv4"
- 
--#: ../lib/hw.c:198
-+#: ../lib/hw.c:214
- msgid "IrLAP"
- msgstr "IrLAP"
- 
--#: ../lib/hw.c:201
-+#: ../lib/hw.c:217
- msgid "16/4 Mbps Token Ring"
- msgstr "Token Ring 16/4 Mb/s"
- 
--#: ../lib/hw.c:203
-+#: ../lib/hw.c:219
- #, fuzzy
- msgid "16/4 Mbps Token Ring (New)"
- msgstr "Token Ring 16/4 Mb/s"
- 
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr ""
-+
- #: ../lib/inet.c:153 ../lib/inet6.c:79
- #, c-format
- msgid "rresolve: unsupport address family %d !\n"
- msgstr "rresolve: tøída adres %d není podporována!\n"
- 
--#: ../lib/inet6_gr.c:79
-+#: ../lib/inet6.c:131
-+#, fuzzy
-+msgid "[UNKNOWN]"
-+msgstr "NEZNÁM"
-+
-+#: ../lib/inet6_gr.c:71
-+#, c-format
- msgid "INET6 (IPv6) not configured in this system.\n"
- msgstr "INET6 (IPv6) není na tomto systému nakonfigurováno.\n"
- 
--#: ../lib/inet6_gr.c:82
-+#: ../lib/inet6_gr.c:74
-+#, c-format
- msgid "Kernel IPv6 routing table\n"
- msgstr "Smìrovací tabulka v jádru pro IPv6\n"
- 
--#: ../lib/inet6_gr.c:84
-+#: ../lib/inet6_gr.c:76
-+#, c-format
- msgid ""
--"Destination                                 Next Hop                         "
--"       Flags Metric Ref    Use Iface\n"
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
- msgstr ""
--"Adresát                                     Dal¹í Smìrovaè                   "
--"       Pøízn Metrika Odkaz U¾it Rozhraní\n"
-+"Adresát                                     Dal¹í "
-+"Smìrovaè                          Pøízn Metrika Odkaz U¾it Rozhraní\n"
- 
--#: ../lib/inet6_gr.c:158
-+#: ../lib/inet6_gr.c:150
-+#, c-format
- msgid "Kernel IPv6 Neighbour Cache\n"
- msgstr "Cache sousedù v jádru pro IPv6\n"
- 
--#: ../lib/inet6_gr.c:161
-+#: ../lib/inet6_gr.c:153
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State\n"
-@@ -2098,7 +2412,8 @@
- "Soused                                      HW Adresa         Rozhraní Pøízn "
- "Odkazy Stav\n"
- 
--#: ../lib/inet6_gr.c:165
-+#: ../lib/inet6_gr.c:157
-+#, c-format
- msgid ""
- "Neighbour                                   HW Address        Iface    Flags "
- "Ref State            Stale(sec) Delete(sec)\n"
-@@ -2107,30 +2422,37 @@
- "Pøíznaky Odkazy Stav          Pro¹lý(sec) Smazat(sec)\n"
- 
- #: ../lib/inet6_sr.c:46
-+#, c-format
- msgid "Usage: inet6_route [-vF] del Target\n"
- msgstr "Pou¾ití: inet6_route [-vF] del Cíl\n"
- 
- #: ../lib/inet6_sr.c:47
-+#, c-format
- msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
- msgstr "       inet6_route [-vF] add Cíl [gw Gw] [metrika M] [[dev] If]\n"
- 
- #: ../lib/inet6_sr.c:48
-+#, c-format
- msgid "       inet6_route [-FC] flush      NOT supported\n"
- msgstr "       inet6_route [-FC] flush      NENÍ podporováno\n"
- 
--#: ../lib/inet6_sr.c:182
-+#: ../lib/inet6_sr.c:188
-+#, c-format
- msgid "Flushing `inet6' routing table not supported\n"
- msgstr "Smìrovací tabulku `inet6' nelze vyprazdòovat\n"
- 
- #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
- msgid "INET (IPv4) not configured in this system.\n"
- msgstr "INET (IPv4) není na tomto systému nakonfigurováno.\n"
- 
- #: ../lib/inet_gr.c:53
-+#, c-format
- msgid "Kernel IP routing table\n"
- msgstr "Smìrovací tabulka v jádru pro IP\n"
- 
- #: ../lib/inet_gr.c:56
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2139,6 +2461,7 @@
- "Rozhraní\n"
- 
- #: ../lib/inet_gr.c:59
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2147,6 +2470,7 @@
- "Rozhraní\n"
- 
- #: ../lib/inet_gr.c:62
-+#, c-format
- msgid ""
- "Destination     Gateway         Genmask         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt\n"
-@@ -2155,10 +2479,12 @@
- "Rozhraní MSS   Okno   irtt\n"
- 
- #: ../lib/inet_gr.c:237
-+#, c-format
- msgid "Kernel IP routing cache\n"
- msgstr "Smìrovací cache v jádru pro IP\n"
- 
- #: ../lib/inet_gr.c:258
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface\n"
-@@ -2167,6 +2493,7 @@
- "Rozhraní\n"
- 
- #: ../lib/inet_gr.c:261
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags   MSS Window  irtt "
- "Iface\n"
-@@ -2175,6 +2502,7 @@
- "Rozhraní\n"
- 
- #: ../lib/inet_gr.c:266
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  HH  Arp\n"
-@@ -2183,6 +2511,7 @@
- "Rozhraní MSS   Okno   irtt HH   Arp\n"
- 
- #: ../lib/inet_gr.c:290
-+#, c-format
- msgid ""
- "Source          Destination     Gateway         Flags Metric Ref    Use "
- "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-@@ -2190,7 +2519,8 @@
- "Odesílatel      Adresát         Maska           Pøízn Metrik Odkazy U¾t "
- "Rozhraní MSS    Okno irtt   TOS HHOdk HHAktuál    Zvlá¹tCíl\n"
- 
--#: ../lib/inet_sr.c:50
-+#: ../lib/inet_sr.c:51
-+#, c-format
- msgid ""
- "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
- "[[dev] If]\n"
-@@ -2198,29 +2528,34 @@
- "Pou¾ití: inet_route [-vF] del {-host|-net} Cíl[/prefix] [gw Gw] [metrika M] "
- "[[dev] If]\n"
- 
--#: ../lib/inet_sr.c:51
-+#: ../lib/inet_sr.c:52
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Cíl[/prefix] [gw Gw] [metrika M]\n"
- 
--#: ../lib/inet_sr.c:52
-+#: ../lib/inet_sr.c:53
-+#, c-format
- msgid ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- msgstr ""
- "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
- 
--#: ../lib/inet_sr.c:53
-+#: ../lib/inet_sr.c:54
-+#, c-format
- msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
- 
--#: ../lib/inet_sr.c:54
-+#: ../lib/inet_sr.c:55
-+#, c-format
- msgid ""
- "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
- msgstr ""
- "       inet_route [-vF] add {-host|-net} Cíl/[prefix] [metrika M] reject\n"
- 
--#: ../lib/inet_sr.c:55
-+#: ../lib/inet_sr.c:56
-+#, c-format
- msgid "       inet_route [-FC] flush      NOT supported\n"
- msgstr "       inet_route [-FC] flush      NENÍ podporováno\n"
- 
-@@ -2230,15 +2565,17 @@
- msgstr "route: %s: sí» nelze pou¾ít jako bránu!\n"
- 
- #: ../lib/inet_sr.c:174
--#, fuzzy
-+#, fuzzy, c-format
- msgid "route: Invalid MSS/MTU.\n"
- msgstr "route: Nesprávné NSS.\n"
- 
- #: ../lib/inet_sr.c:187
-+#, c-format
- msgid "route: Invalid window.\n"
- msgstr "route: Nesprávné okno.\n"
- 
- #: ../lib/inet_sr.c:203
-+#, c-format
- msgid "route: Invalid initial rtt.\n"
- msgstr "route: Nesprávné zahajovací rtt.\n"
- 
-@@ -2253,75 +2590,92 @@
- msgstr "route: sí»ová maska %s je nesprávná\n"
- 
- #: ../lib/inet_sr.c:270
-+#, c-format
- msgid "route: netmask doesn't match route address\n"
- msgstr "route: sí»ová maska nevyhovuje adrese cesty\n"
- 
- #: ../lib/inet_sr.c:306
-+#, c-format
- msgid "Flushing `inet' routing table not supported\n"
- msgstr "Smìrovací cache `inet' nelze vyprazdòovat\n"
- 
- #: ../lib/inet_sr.c:310
-+#, c-format
- msgid "Modifying `inet' routing cache not supported\n"
- msgstr "Smìrovací cache `inet' nelze mìnit\n"
- 
- #: ../lib/ipx_gr.c:52
-+#, c-format
- msgid "IPX not configured in this system.\n"
- msgstr "IPX není na tomto systému nakonfigurováno.\n"
- 
- #: ../lib/ipx_gr.c:56
-+#, c-format
- msgid "Kernel IPX routing table\n"
- msgstr "Smìrovací tabulka v jádru pro IPX\n"
- 
- #. xxx
- #: ../lib/ipx_gr.c:57
-+#, c-format
- msgid "Destination               Router Net                Router Node\n"
- msgstr "Cíl                       Smìrovaè Sí»              Smìrovaè Uzel\n"
- 
- #: ../lib/ipx_sr.c:33
-+#, c-format
- msgid "IPX: this needs to be written\n"
- msgstr "IPX: toto je tøeba ulo¾it\n"
- 
--#: ../lib/masq_info.c:197
-+#: ../lib/masq_info.c:198
-+#, c-format
- msgid "IP masquerading entries\n"
- msgstr "IP maskovací polo¾ky\n"
- 
--#: ../lib/masq_info.c:200
-+#: ../lib/masq_info.c:201
-+#, c-format
- msgid "prot   expire source               destination          ports\n"
- msgstr "prot   ¾ivot  zdroj                cíl                  porty\n"
- 
--#: ../lib/masq_info.c:203
-+#: ../lib/masq_info.c:204
-+#, c-format
- msgid ""
--"prot   expire    initseq delta prevd source               destination        "
--"  ports\n"
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
- msgstr ""
--"prot   ¾ivot     zahajsek delta pøedchd zdroj             cíl                "
--"   porty\n"
-+"prot   ¾ivot     zahajsek delta pøedchd zdroj             "
-+"cíl                   porty\n"
- 
- #: ../lib/netrom_gr.c:48
-+#, c-format
- msgid "NET/ROM not configured in this system.\n"
- msgstr "NET/ROM není na tomto systému nakonfigurováno.\n"
- 
- #: ../lib/netrom_gr.c:51
-+#, c-format
- msgid "Kernel NET/ROM routing table\n"
- msgstr "Smìrovací tabulka v jádru pro NET/ROM\n"
- 
- #: ../lib/netrom_gr.c:52
-+#, c-format
- msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
- msgstr "Cíl          Mnemonika Kvalita  Soused     Rozhraní\n"
- 
- #: ../lib/netrom_sr.c:34
-+#, c-format
- msgid "netrom usage\n"
- msgstr "pou¾ití netrom\n"
- 
- #: ../lib/netrom_sr.c:44
-+#, c-format
- msgid "NET/ROM: this needs to be written\n"
- msgstr "NET/ROM: toto je potøeba ulo¾it\n"
- 
- #: ../lib/ppp.c:44
-+#, c-format
- msgid "You cannot start PPP with this program.\n"
- msgstr "Tímto programem nelze PPP spustit.\n"
- 
- #: ../lib/ppp_ac.c:38
-+#, c-format
- msgid "Sorry, use pppd!\n"
- msgstr "Lituji, pou¾ijte pppd!\n"
- 
-@@ -2330,49 +2684,319 @@
- msgstr "Adresa uzlu musí mít 10 èíslic"
- 
- #: ../lib/rose_gr.c:51
-+#, c-format
- msgid "ROSE not configured in this system.\n"
- msgstr "ROSE není na tomto systému nakonfigurováno.\n"
- 
- #: ../lib/rose_gr.c:54
-+#, c-format
- msgid "Kernel ROSE routing table\n"
- msgstr "Smìrovací tabulka v jádru pro ROSE\n"
- 
--#: ../lib/tr.c:70 ../lib/tr.c:85
-+#: ../lib/tr.c:86 ../lib/tr.c:101
- #, c-format
- msgid "in_tr(%s): invalid token ring address!\n"
- msgstr "in_tr(%s): nesprávná token ring adresa!\n"
- 
--#: ../lib/tr.c:97
-+#: ../lib/tr.c:113
- #, c-format
- msgid "in_tr(%s): trailing : ignored!\n"
- msgstr "in_tr(%s): nadbyteèné: ignorováno!\n"
- 
--#: ../lib/tr.c:109
-+#: ../lib/tr.c:125
- #, c-format
- msgid "in_tr(%s): trailing junk!\n"
- msgstr "in_tr(%s): nadbyteèné znaky!\n"
- 
--#: ../lib/interface.c:124
-+#: ../lib/interface.c:176
- #, c-format
- msgid "warning: no inet socket available: %s\n"
- msgstr "varování: není dostupný ¾ádný inet soket: %s\n"
- 
--#: ../lib/interface.c:270
-+#: ../lib/interface.c:325
- #, c-format
- msgid "Warning: cannot open %s (%s). Limited output.\n"
- msgstr ""
- 
- #. Give better error message for this case.
--#: ../lib/interface.c:504
-+#: ../lib/interface.c:571
- msgid "Device not found"
- msgstr "Zaøízení nebylo nalezeno"
- 
--#: ../lib/interface.c:508
-+#: ../lib/interface.c:575
- #, c-format
- msgid "%s: error fetching interface information: %s\n"
- msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
- 
--#: ../lib/sockets.c:59
-+#: ../lib/interface.c:608
-+msgid "     - no statistics available -"
-+msgstr "     - statistická data nejsou dostupná -"
-+
-+#: ../lib/interface.c:612
-+#, c-format
-+msgid "[NO FLAGS]"
-+msgstr "[®ÁDNÉ PØÍZNAKY]"
-+
-+#: ../lib/interface.c:688
-+#, c-format
-+msgid "%-9.9s Link encap:%s  "
-+msgstr "%-9.9s Zapouzdøení:%s  "
-+
-+#: ../lib/interface.c:693
-+#, c-format
-+msgid "HWaddr %s  "
-+msgstr "HWadr %s  "
-+
-+#: ../lib/interface.c:696
-+#, c-format
-+msgid "Media:%s"
-+msgstr "Médium:%s"
-+
-+#: ../lib/interface.c:698
-+#, c-format
-+msgid "(auto)"
-+msgstr "(auto)"
-+
-+#: ../lib/interface.c:705
-+#, c-format
-+msgid "          %s addr:%s "
-+msgstr "          %s adr:%s "
-+
-+#: ../lib/interface.c:708
-+#, c-format
-+msgid " P-t-P:%s "
-+msgstr " P-t-P:%s "
-+
-+# V ostatních katalozích se pøekládá Broadcast -> v¹esmìrové vysílání.
-+# Tudi¾ bcast -> V¹esmìr :)
-+#: ../lib/interface.c:711
-+#, c-format
-+msgid " Bcast:%s "
-+msgstr " V¹esmìr:%s "
-+
-+#: ../lib/interface.c:713
-+#, c-format
-+msgid " Mask:%s\n"
-+msgstr "Maska:%s\n"
-+
-+#: ../lib/interface.c:730
-+#, c-format
-+msgid "          inet6 addr: %s/%d"
-+msgstr "          inet6-adr: %s/%d"
-+
-+#: ../lib/interface.c:732
-+#, c-format
-+msgid " Scope:"
-+msgstr " Rozsah:"
-+
-+#: ../lib/interface.c:735
-+#, c-format
-+msgid "Global"
-+msgstr "Globál"
-+
-+#: ../lib/interface.c:738
-+#, c-format
-+msgid "Link"
-+msgstr "Linka"
-+
-+#: ../lib/interface.c:741
-+#, c-format
-+msgid "Site"
-+msgstr "Stanovi¹tì"
-+
-+#: ../lib/interface.c:744
-+#, c-format
-+msgid "Compat"
-+msgstr "Kompatibilita"
-+
-+#: ../lib/interface.c:747
-+#, c-format
-+msgid "Host"
-+msgstr "Poèítaè"
-+
-+#: ../lib/interface.c:750
-+#, c-format
-+msgid "Unknown"
-+msgstr "Neznám."
-+
-+#: ../lib/interface.c:765
-+#, c-format
-+msgid "          IPX/Ethernet II addr:%s\n"
-+msgstr "          IPX/Ethernet II adr: %s\n"
-+
-+#: ../lib/interface.c:768
-+#, c-format
-+msgid "          IPX/Ethernet SNAP addr:%s\n"
-+msgstr "          IPX/Ethernet SNAP adr:%s\n"
-+
-+#: ../lib/interface.c:771
-+#, c-format
-+msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+msgstr "          IPX/Ethernet 802.2 adr:%s\n"
-+
-+#: ../lib/interface.c:774
-+#, c-format
-+msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+msgstr "          IPX/Ethernet 802.3 adr:%s\n"
-+
-+#: ../lib/interface.c:784
-+#, c-format
-+msgid "          EtherTalk Phase 2 addr:%s\n"
-+msgstr "          EtherTalk Phase 2 adr:%s\n"
-+
-+#: ../lib/interface.c:793
-+#, c-format
-+msgid "          econet addr:%s\n"
-+msgstr "          econet adr:%s\n"
-+
-+# Hic sunt leones ...
-+#: ../lib/interface.c:800
-+#, c-format
-+msgid "[NO FLAGS] "
-+msgstr "[®ÁDNÉ PØÍZNAKY]"
-+
-+#: ../lib/interface.c:802
-+#, c-format
-+msgid "UP "
-+msgstr "AKTIVOVÁNO "
-+
-+#: ../lib/interface.c:804
-+#, c-format
-+msgid "BROADCAST "
-+msgstr "V©ESMÌROVÉ_VYSÍLÁNÍ "
-+
-+#: ../lib/interface.c:806
-+#, c-format
-+msgid "DEBUG "
-+msgstr "DEBUG "
-+
-+#: ../lib/interface.c:808
-+#, c-format
-+msgid "LOOPBACK "
-+msgstr "SMYÈKA "
-+
-+#: ../lib/interface.c:810
-+#, c-format
-+msgid "POINTOPOINT "
-+msgstr "POINTOPOINT "
-+
-+# ??
-+#: ../lib/interface.c:812
-+#, c-format
-+msgid "NOTRAILERS "
-+msgstr "NOTRAILERS "
-+
-+#: ../lib/interface.c:814
-+#, c-format
-+msgid "RUNNING "
-+msgstr "BÌ®Í "
-+
-+#: ../lib/interface.c:816
-+#, c-format
-+msgid "NOARP "
-+msgstr "NEARP "
-+
-+#: ../lib/interface.c:818
-+#, c-format
-+msgid "PROMISC "
-+msgstr "PROMISK "
-+
-+#: ../lib/interface.c:820
-+#, c-format
-+msgid "ALLMULTI "
-+msgstr "ALLMULTI "
-+
-+#: ../lib/interface.c:822
-+#, c-format
-+msgid "SLAVE "
-+msgstr "SLAVE "
-+
-+#: ../lib/interface.c:824
-+#, c-format
-+msgid "MASTER "
-+msgstr "MASTER "
-+
-+#: ../lib/interface.c:826
-+#, c-format
-+msgid "MULTICAST "
-+msgstr "MULTICAST "
-+
-+#: ../lib/interface.c:829
-+#, c-format
-+msgid "DYNAMIC "
-+msgstr "DYNAMIC "
-+
-+#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+#: ../lib/interface.c:832
-+#, c-format
-+msgid " MTU:%d  Metric:%d"
-+msgstr " MTU:%d  Metrika:%d"
-+
-+#: ../lib/interface.c:836
-+#, c-format
-+msgid "  Outfill:%d  Keepalive:%d"
-+msgstr "  Outfill:%d  Keepalive:%d"
-+
-+#: ../lib/interface.c:850
-+#, fuzzy, c-format
-+msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgstr "pøijmutých paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu rámcù:%lu\n"
-+
-+#: ../lib/interface.c:855
-+#, c-format
-+msgid "             compressed:%lu\n"
-+msgstr "             komprimováno:%lu\n"
-+
-+# carrier?
-+#: ../lib/interface.c:895
-+#, fuzzy, c-format
-+msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgstr "odeslaných paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu pøenos:%lu\n"
-+
-+#: ../lib/interface.c:899
-+#, c-format
-+msgid "          collisions:%lu "
-+msgstr "          kolizí:%lu "
-+
-+#: ../lib/interface.c:901
-+#, c-format
-+msgid "compressed:%lu "
-+msgstr "komprimováno:%lu "
-+
-+#: ../lib/interface.c:903
-+#, c-format
-+msgid "txqueuelen:%d "
-+msgstr "délka odchozí fronty:%d "
-+
-+#: ../lib/interface.c:905
-+#, c-format
-+msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+msgstr ""
-+
-+#: ../lib/interface.c:916
-+#, c-format
-+msgid "Interrupt:%d "
-+msgstr "Pøeru¹ení:%d "
-+
-+#. Only print devices using it for
-+#. I/O maps
-+#: ../lib/interface.c:919
-+#, c-format
-+msgid "Base address:0x%x "
-+msgstr "Vstupnì/Výstupní port:0x%x "
-+
-+#: ../lib/interface.c:921
-+#, c-format
-+msgid "Memory:%lx-%lx "
-+msgstr "Pamì»:%lx-%lx "
-+
-+#: ../lib/interface.c:924
-+#, c-format
-+msgid "DMA chan:%x "
-+msgstr "Kanál DMA:%x "
-+
-+#: ../lib/sockets.c:63
-+#, c-format
- msgid "No usable address families found.\n"
- msgstr "Nebyla nalezena ¾ádná pou¾itelná tøída adres.\n"
- 
-@@ -2396,29 +3020,32 @@
- msgid "ip: argument is wrong: %s\n"
- msgstr "ip: argument %s je nesprávný\n"
- 
--#: ../ipmaddr.c:56
-+#: ../ipmaddr.c:61
-+#, c-format
- msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
- msgstr " Usage: ipmaddr [ add | del ] MULTIADR dev ØETÌZEC\n"
- 
--#: ../ipmaddr.c:57
-+#: ../ipmaddr.c:62
-+#, c-format
- msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
- msgstr "       ipmaddr show [ dev ØETÌZEC ] [ ipv4 | ipv6 | link | all ]\n"
- 
--#: ../ipmaddr.c:58
-+#: ../ipmaddr.c:63
-+#, c-format
- msgid "       ipmaddr -V | -version\n"
- msgstr "       ipmaddr -V | -version\n"
- 
--#: ../ipmaddr.c:258
-+#: ../ipmaddr.c:263
- #, c-format
- msgid "family %d "
- msgstr "tøída %d "
- 
--#: ../ipmaddr.c:267
-+#: ../ipmaddr.c:272
- #, c-format
- msgid " users %d"
- msgstr " u¾ivatelé %d"
- 
--#: ../ipmaddr.c:353
-+#: ../ipmaddr.c:358
- msgid "Cannot create socket"
- msgstr "Soket nelze vytvoøit"
- 
-@@ -2433,6 +3060,7 @@
- msgstr "slattach: tty_lock: (%s): %s\n"
- 
- #: ../slattach.c:192
-+#, c-format
- msgid "slattach: cannot write PID file\n"
- msgstr "slattach: do PID souboru nelze zapisovat\n"
- 
-@@ -2451,44 +3079,77 @@
- msgid "slattach: tty_hangup(RAISE): %s\n"
- msgstr "slattach: tty_hangup(RAISE): %s\n"
- 
--#: ../slattach.c:486
-+#: ../slattach.c:468
-+#, fuzzy, c-format
-+msgid "slattach: tty name too long\n"
-+msgstr "jméno %s je pøíli¹ dlouhé\n"
-+
-+#: ../slattach.c:498
-+#, c-format
- msgid "slattach: tty_open: cannot get current state!\n"
- msgstr "slattach: tty_open: aktuální stav nelze zjistit!\n"
- 
--#: ../slattach.c:493
-+#: ../slattach.c:505
-+#, c-format
- msgid "slattach: tty_open: cannot get current line disc!\n"
- msgstr "slattach: tty_open: aktuální linkovou disciplínu nelze zjistit!\n"
- 
--#: ../slattach.c:501
-+#: ../slattach.c:513
-+#, c-format
- msgid "slattach: tty_open: cannot set RAW mode!\n"
- msgstr "slattach: tty_open: re¾im RAW nelze nastavit!\n"
- 
--#: ../slattach.c:508
-+#: ../slattach.c:520
- #, c-format
- msgid "slattach: tty_open: cannot set %s bps!\n"
- msgstr "slattach: tty_open: %s bps nelze nastavit!\n"
- 
--#: ../slattach.c:518
-+#: ../slattach.c:530
-+#, c-format
- msgid "slattach: tty_open: cannot set 8N1 mode!\n"
- msgstr "slattach: tty_open: re¾im 8N1 nelze nastavit!\n"
- 
--#: ../slattach.c:686
-+#: ../slattach.c:672
-+#, c-format
-+msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+msgstr ""
-+
-+#: ../slattach.c:704
- #, c-format
- msgid "%s started"
- msgstr "protokol %s spu¹tìn"
- 
--#: ../slattach.c:687
-+#: ../slattach.c:705
- #, c-format
- msgid " on %s"
- msgstr " na %s"
- 
--#: ../slattach.c:688
-+#: ../slattach.c:706
- #, c-format
- msgid " interface %s\n"
- msgstr " rozhraní %s\n"
- 
- #~ msgid ""
--#~ "   This comand can read or set the hostname or the NIS domainname. You can\n"
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+#~ "<-''-\n"
-+#~ msgstr ""
-+#~ "  arp [-v]   [<HW>] [-i <if>] -s <soubor> <hwadr> [sí»mask <èís>]  <-''-\n"
-+
-+#~ msgid "%s: unknown interface: %s\n"
-+#~ msgstr "%s: rozhraní %s není známo\n"
-+
-+#~ msgid "address mask replies"
-+#~ msgstr "odpovìdi na ¾ádost o masku podsítì"
-+
-+#~ msgid "unknown title %s\n"
-+#~ msgstr "titulek %s je neznámý\n"
-+
-+#~ msgid "Routing table for `ddp' not yet supported.\n"
-+#~ msgstr "Smìrovací tabulka pro `ddp' není zatím podporována.\n"
-+
-+#~ msgid ""
-+#~ "   This comand can read or set the hostname or the NIS domainname. You "
-+#~ "can\n"
- #~ msgstr ""
- #~ "   Tento program zji¹»uje a nastavuje jméno poèítaèe èi NIS domény. Mù¾e "
- #~ "také\n"
-@@ -2500,7 +3161,8 @@
- #~ msgid ""
- #~ "   Unless you are using bind or NIS for host lookups you can change the\n"
- #~ msgstr ""
--#~ "   Pokud nepou¾íváte bind èi NIS pro vyhledávání jmen poèítaèù, pak mù¾ete\n"
-+#~ "   Pokud nepou¾íváte bind èi NIS pro vyhledávání jmen poèítaèù, pak "
-+#~ "mù¾ete\n"
- 
- #~ msgid ""
- #~ "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
---- net-tools-1.60.orig/po/ja.po
-+++ net-tools-1.60/po/ja.po
-@@ -0,0 +1,3133 @@
-+# Net-tool Japanese locale data
-+# Kenshi Muto <kmuto@debian.org>, 2007.
-+# Yasuyuki Furukawa <yasu@on.cs.keio.ac.jp>, 1999.
-+#
-+msgid ""
-+msgstr ""
-+"Report-Msgid-Bugs-To: \n"
-+"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+"PO-Revision-Date: 2007-07-04 20:47+0900\n"
-+"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
-+"Language-Team: Japanese\n"
-+"MIME-Version: 1.0\n"
-+"Content-Type: text/plain; charset=UTF-8\n"
-+"Content-Transfer-Encoding: 8-bit\n"
-+
-+#: ../arp.c:112 ../arp.c:279
-+#, c-format
-+msgid "arp: need host name\n"
-+msgstr "arp: ホスト��必���\n"
-+
-+#: ../arp.c:215 ../arp.c:230
-+#, c-format
-+msgid "No ARP entry for %s\n"
-+msgstr "%s�ARPエントリ��り��ん\n"
-+
-+#: ../arp.c:248
-+#, c-format
-+msgid "arp: cant get HW-Address for `%s': %s.\n"
-+msgstr "arp: '%s'��ードウェアアドレスを�得����ん: %s.\n"
-+
-+#: ../arp.c:252
-+#, c-format
-+msgid "arp: protocol type mismatch.\n"
-+msgstr "arp: プロトコルタイプ������ん.\n"
-+
-+#: ../arp.c:261
-+#, c-format
-+msgid "arp: device `%s' has HW address %s `%s'.\n"
-+msgstr "arp: デ�イス`%s'��ードウェアアドレス%s `%s'��.\n"
-+
-+#: ../arp.c:293
-+#, c-format
-+msgid "arp: need hardware address\n"
-+msgstr "arp: �ードウェアアドレス�必���\n"
-+
-+#: ../arp.c:301
-+#, c-format
-+msgid "arp: invalid hardware address\n"
-+msgstr "arp: �ードウェアアドレス���当��\n"
-+
-+#: ../arp.c:398
-+#, c-format
-+msgid "arp: cannot open etherfile %s !\n"
-+msgstr "arp: etherファイル%s�開���ん!\n"
-+
-+#: ../arp.c:414
-+#, c-format
-+msgid "arp: format error on line %u of etherfile %s !\n"
-+msgstr "arp: %u行(ファイル%s)�フォーマットエラー��り��!\n"
-+
-+#: ../arp.c:427
-+#, c-format
-+msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+msgstr "arp: etherファイル%u行(%s)�エントリを設定����ん!\n"
-+
-+#: ../arp.c:448
-+#, c-format
-+msgid ""
-+"Address                  HWtype  HWaddress           Flags Mask            "
-+"Iface\n"
-+msgstr "アドレス               HWタイプ  HWアドレス         フラグ マスク インタフェース\n"
-+
-+#: ../arp.c:476
-+msgid "<from_interface>"
-+msgstr "<起点インタフェース>"
-+
-+#: ../arp.c:478
-+msgid "(incomplete)"
-+msgstr "(�完全)"
-+
-+# translatable?
-+#: ../arp.c:495
-+#, c-format
-+msgid "%s (%s) at "
-+msgstr "%s (%s) at "
-+
-+#: ../arp.c:501
-+#, c-format
-+msgid "<incomplete> "
-+msgstr "<�完全> "
-+
-+#: ../arp.c:507
-+#, c-format
-+msgid "netmask %s "
-+msgstr "�ットマスク %s "
-+
-+# translatable?
-+#: ../arp.c:524
-+#, c-format
-+msgid "on %s\n"
-+msgstr "on %s\n"
-+
-+#: ../arp.c:605
-+#, c-format
-+msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+msgstr "エントリ: %d\tスキップ: %d\t発見: %d\n"
-+
-+#: ../arp.c:609
-+#, c-format
-+msgid "%s (%s) -- no entry\n"
-+msgstr "%s (%s) -- エントリ��\n"
-+
-+#: ../arp.c:611
-+#, c-format
-+msgid "arp: in %d entries no match found.\n"
-+msgstr "arp: %d�エントリ中, 一致�るも��見��り��ん.\n"
-+
-+#: ../arp.c:626
-+#, c-format
-+msgid ""
-+"Usage:\n"
-+"  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+"cache\n"
-+msgstr ""
-+"使用法:\n"
-+"  arp [-vn]  [<HW>] [-i <インタフェース>]\n"
-+"                                [-a] [<ホスト�>]   ‥‥ ARPキャッシュ�表"
-+"示\n"
-+
-+#: ../arp.c:627
-+#, c-format
-+msgid ""
-+"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+"entry\n"
-+msgstr "  arp [-v]    [-i <インタフェース>]  -d  <ホスト�> [pub] ‥‥ARPエントリを削除\n"
-+
-+#: ../arp.c:628
-+#, c-format
-+msgid ""
-+"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+"file\n"
-+msgstr ""
-+"  arp [-vnD] [<HW>] [-i <インタフェース>] \n"
-+"                              -f  <ファイル�>  ‥‥ファイル�らエントリを追加\n"
-+
-+#: ../arp.c:629
-+#, c-format
-+msgid ""
-+"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+"entry\n"
-+msgstr ""
-+"  arp [-v]   [<HW>] [-i <インタフェース>]\n"
-+"             -s <ホスト�> <�ードウェアアドレス> [temp] ‥‥エントリを追加\n"
-+
-+# FIXME:What does '' mean?
-+#: ../arp.c:630
-+#, c-format
-+msgid ""
-+"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+"<-''-\n"
-+"\n"
-+msgstr ""
-+"  arp [-v]   [<HW>] [-i <インタフェース>] -Ds <ホスト�>\n"
-+"              <インタフェース> [netmask <�ットマスク>] pub     ‥‥     〃\n"
-+
-+#: ../arp.c:632
-+#, c-format
-+msgid ""
-+"        -a                       display (all) hosts in alternative (BSD) "
-+"style\n"
-+msgstr ""
-+"        -a                 新��(BSD)スタイル�エントリ�れ�全ホストを表示"
-+"�る\n"
-+
-+#: ../arp.c:633
-+#, c-format
-+msgid "        -s, --set                set a new ARP entry\n"
-+msgstr "        -s, --set          新�ARPエントリを設定�る\n"
-+
-+#: ../arp.c:634
-+#, c-format
-+msgid "        -d, --delete             delete a specified entry\n"
-+msgstr "        -d, --delete       指定エントリを削除�る\n"
-+
-+#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-+#, c-format
-+msgid "        -v, --verbose            be verbose\n"
-+msgstr "        -v, --verbose            詳細表示を行��\n"
-+
-+#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-+#, c-format
-+msgid "        -n, --numeric            don't resolve names\n"
-+msgstr "        -n, --numeric            ���レゾルブを���\n"
-+
-+#: ../arp.c:637
-+#, c-format
-+msgid ""
-+"        -i, --device             specify network interface (e.g. eth0)\n"
-+msgstr "        -i, --device       �ットワークインタフェース�指定(例 eth0)\n"
-+
-+#: ../arp.c:638
-+#, c-format
-+msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+msgstr ""
-+"        -D, --use-device   与�られ�デ�イス�ら\n"
-+"                                    <HWアドレス>を読�込む\n"
-+
-+#: ../arp.c:639
-+#, c-format
-+msgid "        -A, -p, --protocol       specify protocol family\n"
-+msgstr "        -A, -p, --protocol       プロトコルファミリを指定�る\n"
-+
-+#: ../arp.c:640
-+#, c-format
-+msgid ""
-+"        -f, --file               read new entries from file or from /etc/"
-+"ethers\n"
-+"\n"
-+msgstr "        -f, --file         /etc/ethersファイル�ら新�エントリを読�込む\n\n"
-+
-+#: ../arp.c:642 ../rarp.c:182
-+#, c-format
-+msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+msgstr "  <HW>=�ードウェアアドレスタイプを指定�る��'-H <hw>'を使��下��。標準: %s\n"
-+
-+#: ../arp.c:643 ../rarp.c:183
-+#, c-format
-+msgid "  List of possible hardware types (which support ARP):\n"
-+msgstr "  (ARPをサ�ート��)指定�能��ードウェアタイプ�リスト:\n"
-+
-+#: ../arp.c:677 ../arp.c:762
-+#, c-format
-+msgid "%s: hardware type not supported!\n"
-+msgstr "%s: �ードウェアタイプ�サ�ート�れ����ん!\n"
-+
-+#: ../arp.c:681
-+#, c-format
-+msgid "%s: address family not supported!\n"
-+msgstr "%s: アドレスファミリ�サ�ート�れ����ん!\n"
-+
-+#: ../arp.c:716
-+#, c-format
-+msgid "arp: -N not yet supported.\n"
-+msgstr "arp: -N���サ�ート�����ん.\n"
-+
-+#: ../arp.c:726
-+#, c-format
-+msgid "arp: %s: unknown address family.\n"
-+msgstr "arp: %s: �明�アドレスファミリ��.\n"
-+
-+#: ../arp.c:735
-+#, c-format
-+msgid "arp: %s: unknown hardware type.\n"
-+msgstr "arp: %s: �明��ードウェアタイプ��.\n"
-+
-+#: ../arp.c:754
-+#, c-format
-+msgid "arp: %s: kernel only supports 'inet'.\n"
-+msgstr "arp: %s: カー�ル�'inet'以外�サ�ート�����ん.\n"
-+
-+#: ../arp.c:767
-+#, c-format
-+msgid "arp: %s: hardware type without ARP support.\n"
-+msgstr "arp: %s: ARPサ�ート����ードウェアタイプ��.\n"
-+
-+#: ../hostname.c:71
-+#, c-format
-+msgid "Setting nodename to `%s'\n"
-+msgstr "ノード�を`%s'�設定����\n"
-+
-+#: ../hostname.c:76
-+#, c-format
-+msgid "%s: you must be root to change the node name\n"
-+msgstr "%s: ノード��変更�ルート���れ��り��ん\n"
-+
-+#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+#, c-format
-+msgid "%s: name too long\n"
-+msgstr "%s: ���長����\n"
-+
-+#: ../hostname.c:91
-+#, c-format
-+msgid "Setting hostname to `%s'\n"
-+msgstr "ホスト�を`%s'�設定����\n"
-+
-+#: ../hostname.c:96
-+#, c-format
-+msgid "%s: you must be root to change the host name\n"
-+msgstr "%s: ホスト��変更�ルート���れ��り��ん\n"
-+
-+#: ../hostname.c:109
-+#, c-format
-+msgid "Setting domainname to `%s'\n"
-+msgstr "ドメインを`%s'�設定����\n"
-+
-+#: ../hostname.c:114
-+#, c-format
-+msgid "%s: you must be root to change the domain name\n"
-+msgstr "%s: ドメイン��変更�ルート���れ��り��ん\n"
-+
-+#: ../hostname.c:131
-+#, c-format
-+msgid "Resolving `%s' ...\n"
-+msgstr "`%s'をレゾルブ中 ...\n"
-+
-+#: ../hostname.c:137
-+#, c-format
-+msgid "Result: h_name=`%s'\n"
-+msgstr "�果: h_name=`%s'\n"
-+
-+#: ../hostname.c:142
-+#, c-format
-+msgid "Result: h_aliases=`%s'\n"
-+msgstr "�果: h_aliases=`%s'\n"
-+
-+#: ../hostname.c:147
-+#, c-format
-+msgid "Result: h_addr_list=`%s'\n"
-+msgstr "�果: h_addr_list=`%s'\n"
-+
-+#: ../hostname.c:208
-+#, c-format
-+msgid "%s: can't open `%s'\n"
-+msgstr "%s: `%s'を開���ん\n"
-+
-+#: ../hostname.c:222
-+#, c-format
-+msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+msgstr "使用法: hostname   [-v] {ホスト�|-F ファイル}    (ファイル�よる)ホスト��設定\n"
-+
-+#: ../hostname.c:223
-+#, c-format
-+msgid ""
-+"       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+msgstr "        domainname [-v] {NISドメイン|-F ファイル} (ファイル�よる)NISドメイン��設定\n"
-+
-+#: ../hostname.c:225
-+#, c-format
-+msgid ""
-+"       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+"file)\n"
-+msgstr ""
-+"nodename [-v] {ノード�|-F ファイル}  (ファイル�よる)DECnetノード��設定\n"
-+
-+#: ../hostname.c:227
-+#, c-format
-+msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+msgstr "        hostname [-v] [-d|-f|-s|-a|-i|-y]     形�を指定��表示\n"
-+
-+#: ../hostname.c:228
-+#, c-format
-+msgid ""
-+"       hostname [-v]                         display hostname\n"
-+"\n"
-+msgstr ""
-+"        hostname [-v]                         ホスト��出力\n"
-+"\n"
-+
-+#: ../hostname.c:229
-+#, c-format
-+msgid ""
-+"       hostname -V|--version|-h|--help       print info and exit\n"
-+"\n"
-+msgstr ""
-+"        hostname -V|--version|-h|--help       諸情報を出力��終了\n"
-+"\n"
-+"\n"
-+
-+#: ../hostname.c:230
-+#, c-format
-+msgid ""
-+"    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+"\n"
-+msgstr "    dnsdomainname=ホスト� -d, {yp,nis,}domainname=ホスト� -y\n\n"
-+
-+#: ../hostname.c:231
-+#, c-format
-+msgid "    -s, --short           short host name\n"
-+msgstr "    -s, --short           短縮ホスト�\n"
-+
-+#: ../hostname.c:232
-+#, c-format
-+msgid "    -a, --alias           alias names\n"
-+msgstr "    -a, --alias           エイリアス�\n"
-+
-+#: ../hostname.c:233
-+#, c-format
-+msgid "    -i, --ip-address      addresses for the hostname\n"
-+msgstr "    -i, --ip-address      ホスト��対�るアドレス\n"
-+
-+#: ../hostname.c:234
-+#, c-format
-+msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+msgstr "    -f, --fqdn, --long    ロングホスト�(FQDN)\n"
-+
-+#: ../hostname.c:235
-+#, c-format
-+msgid "    -d, --domain          DNS domain name\n"
-+msgstr "    -d, --domain          DNSドメイン�\n"
-+
-+#: ../hostname.c:236
-+#, c-format
-+msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+msgstr "    -y, --yp, --nis       NIS/YPドメイン�\n"
-+
-+#: ../hostname.c:238
-+#, c-format
-+msgid "    -n, --node            DECnet node name\n"
-+msgstr "    -n, --node            DECnetノード�\n"
-+
-+#: ../hostname.c:240
-+#, c-format
-+msgid ""
-+"    -F, --file            read hostname or NIS domainname from given file\n"
-+"\n"
-+msgstr "    -F, --file            指定�ファイル�らホスト��NISドメイン�を読�込む\n\n"
-+
-+#: ../hostname.c:242
-+#, c-format
-+msgid ""
-+"   This command can read or set the hostname or the NIS domainname. You can\n"
-+"   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+"   Unless you are using bind or NIS for host lookups you can change the\n"
-+"   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
-+"   part of the FQDN) in the /etc/hosts file.\n"
-+msgstr ""
-+"   ��コマンド���ホスト����NISドメイン�を読�込����設定����。\n"
-+"   DNSドメイン���FDN(完全修飾ドメイン�)を読�込む��も����。\n"
-+"   ホスト���照�Bind�よ�, NISも使���場�, /etc/hostsファイル��る\n"
-+"   FQDNや, (FQDN�一部分�)ドメイン�を変更����.\n"
-+
-+#: ../hostname.c:338
-+#, c-format
-+msgid "%s: You can't change the DNS domain name with this command\n"
-+msgstr "%s: ��コマンド��DNSドメイン��変更����ん.\n"
-+
-+#: ../hostname.c:339
-+#, c-format
-+msgid ""
-+"\n"
-+"Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+msgstr ""
-+"\n"
-+"ホスト���照�Bind�よ�, NISも使���場��/etc/hostsファイル\n"
-+
-+#: ../hostname.c:340
-+#, c-format
-+msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+msgstr "��るFQDNや, (FQDN�一部分�)ドメイン�を変更����.\n"
-+
-+#: ../hostname.c:357
-+#, c-format
-+msgid "gethostname()=`%s'\n"
-+msgstr "gethostname()=`%s'\n"
-+
-+#: ../hostname.c:374
-+#, c-format
-+msgid "getdomainname()=`%s'\n"
-+msgstr "getdomainname()=`%s'\n"
-+
-+#: ../hostname.c:389
-+#, c-format
-+msgid "getnodename()=`%s'\n"
-+msgstr "getnodename()=`%s'\n"
-+
-+#: ../ifconfig.c:107
-+#, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr "Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR フラグ\n"
-+
-+#: ../ifconfig.c:129 ../ifconfig.c:161
-+#, c-format
-+msgid "%s: ERROR while getting interface flags: %s\n"
-+msgstr "%s: インタフェースフラグ��得中�エラー�発生����:%s\n"
-+
-+#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-+#: ../ifconfig.c:973
-+#, c-format
-+msgid "No support for INET on this system.\n"
-+msgstr "INET���システム��サ�ート�れ����ん.\n"
-+
-+#: ../ifconfig.c:193
-+#, c-format
-+msgid "%s: ERROR while testing interface flags: %s\n"
-+msgstr "%s: インタフェースフラグ�テスト中�エラー�発生����: %s\n"
-+
-+#: ../ifconfig.c:202
-+#, c-format
-+msgid ""
-+"Usage:\n"
-+"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+msgstr ""
-+"使用法:\n"
-+"  ifconfig [-a] [-v] [-s] <インタフェース> [[<AF>] <アドレス>]\n"
-+
-+#: ../ifconfig.c:204
-+#, c-format
-+msgid "  [add <address>[/<prefixlen>]]\n"
-+msgstr "  [add <アドレス>[/<プレフィックス長>]]\n"
-+
-+#: ../ifconfig.c:205
-+#, c-format
-+msgid "  [del <address>[/<prefixlen>]]\n"
-+msgstr "   [del <アドレス>[/<プレフィックス長>]]\n"
-+
-+#: ../ifconfig.c:206
-+#, c-format
-+msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+msgstr "  [[-]broadcast [<アドレス>]]  [[-]pointopoint [<アドレス>]]\n"
-+
-+#: ../ifconfig.c:207
-+#, c-format
-+msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+msgstr "  [netmask <アドレス>]  [dstaddr <アドレス>]  [tunnel <アドレス>]\n"
-+
-+#: ../ifconfig.c:210
-+#, c-format
-+msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+msgstr "  [outfill <数値>] [keepalive <数値>]\n"
-+
-+#: ../ifconfig.c:212
-+#, c-format
-+msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+msgstr "  [hw <HW> <アドレス>]  [metric <数値>]  [mtu <数値>]\n"
-+
-+#: ../ifconfig.c:213
-+#, c-format
-+msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+
-+#: ../ifconfig.c:214
-+#, c-format
-+msgid "  [multicast]  [[-]promisc]\n"
-+msgstr "  [multicast]  [[-]promisc]\n"
-+
-+#: ../ifconfig.c:215
-+#, c-format
-+msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+msgstr "  [mem_start <開始アドレス>] [io_addr <IOアドレス>] [irq <番�>] [media <タイプ>]\n"
-+
-+#: ../ifconfig.c:217
-+#, c-format
-+msgid "  [txqueuelen <NN>]\n"
-+msgstr "   [txqueuelen <TXキュー長>]\n"
-+
-+#: ../ifconfig.c:220
-+#, c-format
-+msgid "  [[-]dynamic]\n"
-+msgstr "  [[-]dynamic]\n"
-+
-+#: ../ifconfig.c:222
-+#, c-format
-+msgid ""
-+"  [up|down] ...\n"
-+"\n"
-+msgstr "  [up|down] ...\n\n"
-+
-+#: ../ifconfig.c:224
-+#, c-format
-+msgid "  <HW>=Hardware Type.\n"
-+msgstr "  <HW>=�ードウェアタイプ.\n"
-+
-+#: ../ifconfig.c:225
-+#, c-format
-+msgid "  List of possible hardware types:\n"
-+msgstr "  利用�能��ードウェアタイプ�リスト:\n"
-+
-+#. 1 = ARPable
-+#: ../ifconfig.c:227
-+#, c-format
-+msgid "  <AF>=Address family. Default: %s\n"
-+msgstr "  <AF>=アドレスファミリ. 標準: %s\n"
-+
-+#: ../ifconfig.c:228
-+#, c-format
-+msgid "  List of possible address families:\n"
-+msgstr "  利用�能�アドレスファミリ�リスト:\n"
-+
-+#: ../ifconfig.c:303
-+#, c-format
-+msgid "ifconfig: option `%s' not recognised.\n"
-+msgstr "ifconfig: オプション`%s'を解釈����ん.\n"
-+
-+#: ../ifconfig.c:305 ../ifconfig.c:962
-+#, c-format
-+msgid "ifconfig: `--help' gives usage information.\n"
-+msgstr "ifconfig: `--help'�使用法を見られ��.\n"
-+
-+#: ../ifconfig.c:380
-+#, c-format
-+msgid "Unknown media type.\n"
-+msgstr "�明�メディアタイプ��.\n"
-+
-+#: ../ifconfig.c:417
-+#, c-format
-+msgid ""
-+"Warning: Interface %s still in promisc mode... maybe other application is "
-+"running?\n"
-+msgstr "警告: インタフェース%s���promiscモード��...�ら�他�アプリケーション�実行中���り��ん�?\n"
-+
-+#: ../ifconfig.c:429
-+#, c-format
-+msgid "Warning: Interface %s still in MULTICAST mode.\n"
-+msgstr "警告: インタフェース%s���MULTICASTモード��.\n"
-+
-+#: ../ifconfig.c:441
-+#, c-format
-+msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+msgstr "警告: インタフェース%s���ALLMULTIモード��.\n"
-+
-+#: ../ifconfig.c:465
-+#, c-format
-+msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+msgstr "警告: インタフェース%s���DYNAMICモード��.\n"
-+
-+#: ../ifconfig.c:523
-+#, c-format
-+msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+msgstr "警告: インタフェース%s���BROADCASTモード��.\n"
-+
-+#: ../ifconfig.c:652
-+#, c-format
-+msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-+msgstr "警告: インタフェース%s���POINTOPOINTモード��.\n"
-+
-+#: ../ifconfig.c:684
-+#, c-format
-+msgid "hw address type `%s' has no handler to set address. failed.\n"
-+msgstr "�ードウェアアドレスタイプ`%s'�アドレスを設定�る�ンドラを������ん. 失敗����.\n"
-+
-+#: ../ifconfig.c:693
-+#, c-format
-+msgid "%s: invalid %s address.\n"
-+msgstr "%s: ��切�アドレス��(%s).\n"
-+
-+#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+#, c-format
-+msgid "No support for INET6 on this system.\n"
-+msgstr "INET6���システム��サ�ート�れ����ん.\n"
-+
-+#: ../ifconfig.c:780 ../ifconfig.c:871
-+#, c-format
-+msgid "Interface %s not initialized\n"
-+msgstr "インタフェース%s��期化�れ����ん.\n"
-+
-+#: ../ifconfig.c:792 ../ifconfig.c:882
-+#, c-format
-+msgid "Bad address.\n"
-+msgstr "��切�アドレス��.\n"
-+
-+#: ../ifconfig.c:885
-+#, c-format
-+msgid "Address deletion not supported on this system.\n"
-+msgstr "アドレス削除���システム��サ�ート�れ����ん.\n"
-+
-+#: ../ifconfig.c:957
-+#, c-format
-+msgid "ifconfig: Cannot set address for this protocol family.\n"
-+msgstr "ifconfig:��プロトコルファミリ�アドレスを設定����ん.\n"
-+
-+#: ../ifconfig.c:983
-+#, c-format
-+msgid "No support for ECONET on this system.\n"
-+msgstr "ECONET���システム��サ�ート�れ����ん.\n"
-+
-+#: ../ifconfig.c:991
-+#, c-format
-+msgid "Don't know how to set addresses for family %d.\n"
-+msgstr "ファミリ%d�アドレス�設定方法��明��.\n"
-+
-+#: ../ifconfig.c:1021
-+#, c-format
-+msgid "WARNING: at least one error occured. (%d)\n"
-+msgstr "警告: 少���も1��エラー�発生����. (%d)\n"
-+
-+#: ../netstat.c:434
-+#, c-format
-+msgid ""
-+"(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+msgstr "(\"-p\"�情報を読�込���ん���: geteuid()=%d ���ルート��る����.)\n"
-+
-+#: ../netstat.c:438
-+#, c-format
-+msgid ""
-+"(Not all processes could be identified, non-owned process info\n"
-+" will not be shown, you would have to be root to see it all.)\n"
-+msgstr ""
-+"(一部�プロセス�識別�れ���, 所有�����プロセス�情報�\n"
-+"表示�れ��ん。�れら全�を見る��ルート��る必���り��.)\n"
-+
-+# translatable?
-+#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+msgid "LISTENING"
-+msgstr "LISTENING"
-+
-+# translatable?
-+#: ../netstat.c:446
-+msgid "CONN SENT"
-+msgstr "CONN SENT"
-+
-+# translatable?
-+#: ../netstat.c:447 ../netstat.c:1268
-+msgid "DISC SENT"
-+msgstr "DISC SENT"
-+
-+# translatable?
-+#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+msgid "ESTABLISHED"
-+msgstr "ESTABLISHED"
-+
-+#: ../netstat.c:470
-+#, c-format
-+msgid "Active NET/ROM sockets\n"
-+msgstr "稼�中�NET/ROMソケット\n"
-+
-+#: ../netstat.c:471
-+#, c-format
-+msgid ""
-+"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-+"Q\n"
-+msgstr "ユーザ     �信先     発信元    デ�イス  状態        Vr/Vs    �信-Q  �信-Q\n"
-+
-+#: ../netstat.c:481 ../netstat.c:1308
-+#, c-format
-+msgid "Problem reading data from %s\n"
-+msgstr "%s�ら�データ�読�込���題\n"
-+
-+# translatable?
-+#: ../netstat.c:516
-+msgid "SYN_SENT"
-+msgstr "SYN_SENT"
-+
-+# translatable?
-+#: ../netstat.c:517
-+msgid "SYN_RECV"
-+msgstr "SYN_RECV"
-+
-+# translatable?
-+#: ../netstat.c:518
-+msgid "FIN_WAIT1"
-+msgstr "FIN_WAIT1"
-+
-+# translatable?
-+#: ../netstat.c:519
-+msgid "FIN_WAIT2"
-+msgstr "FIN_WAIT2"
-+
-+# translatable?
-+#: ../netstat.c:520
-+msgid "TIME_WAIT"
-+msgstr "TIME_WAIT"
-+
-+# translatable?
-+#: ../netstat.c:521
-+msgid "CLOSE"
-+msgstr "CLOSE"
-+
-+# translatable?
-+#: ../netstat.c:522
-+msgid "CLOSE_WAIT"
-+msgstr "CLOSE_WAIT"
-+
-+# translatable?
-+#: ../netstat.c:523
-+msgid "LAST_ACK"
-+msgstr "LAST_ACK"
-+
-+# translatable?
-+#: ../netstat.c:524
-+msgid "LISTEN"
-+msgstr "LISTEN"
-+
-+# translatable?
-+#: ../netstat.c:525
-+msgid "CLOSING"
-+msgstr "CLOSING"
-+
-+#: ../netstat.c:596
-+#, c-format
-+msgid "warning, got bogus igmp6 line %d.\n"
-+msgstr "警告, ��igmp6ライン%dを得���.\n"
-+
-+#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-+#: ../netstat.c:1032 ../netstat.c:1037
-+#, c-format
-+msgid "netstat: unsupported address family %d !\n"
-+msgstr "netstat: サ�ート����アドレスファミリ%d��!\n"
-+
-+# c-format
-+#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+#, c-format
-+msgid "warning, got bogus igmp line %d.\n"
-+msgstr "警告, ��igmpライン%dを得���.\n"
-+
-+#: ../netstat.c:677
-+#, c-format
-+msgid "Active X.25 sockets\n"
-+msgstr "稼�中�X.25ソケット\n"
-+
-+#. IMHO, Vr/Vs is not very usefull --SF
-+#: ../netstat.c:679
-+#, c-format
-+msgid ""
-+"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-+"Q\n"
-+msgstr "�信先       発信元        デ�イス  LCI  状態         Vr/Vs  �信-Q  �信-Q\n"
-+
-+#: ../netstat.c:759
-+#, c-format
-+msgid "warning, got bogus tcp line.\n"
-+msgstr "警告, ��TCPラインを得���.\n"
-+
-+#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+#, c-format
-+msgid "off (0.00/%ld/%d)"
-+msgstr "オフ (0.00/%ld/%d)"
-+
-+#: ../netstat.c:804
-+#, c-format
-+msgid "on (%2.2f/%ld/%d)"
-+msgstr "オン (%2.2f/%ld/%d)"
-+
-+#: ../netstat.c:809
-+#, c-format
-+msgid "keepalive (%2.2f/%ld/%d)"
-+msgstr "キープアライブ (%2.2f/%ld/%d)"
-+
-+#: ../netstat.c:814
-+#, c-format
-+msgid "timewait (%2.2f/%ld/%d)"
-+msgstr "時間待� (%2.2f/%ld/%d)"
-+
-+#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+#, c-format
-+msgid "unkn-%d (%2.2f/%ld/%d)"
-+msgstr "�明-%d (%2.2f/%ld/%d)"
-+
-+#: ../netstat.c:894
-+#, c-format
-+msgid "warning, got bogus udp line.\n"
-+msgstr "警告, ��UDPラインを得���.\n"
-+
-+#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+msgid "UNKNOWN"
-+msgstr "�明"
-+
-+#: ../netstat.c:958 ../netstat.c:1080
-+#, c-format
-+msgid "on%d (%2.2f/%ld/%d)"
-+msgstr "オン%d (%2.2f/%ld/%d)"
-+
-+#: ../netstat.c:1046
-+#, c-format
-+msgid "warning, got bogus raw line.\n"
-+msgstr "警告, ��Rawラインを得���.\n"
-+
-+#: ../netstat.c:1128
-+#, c-format
-+msgid "warning, got bogus unix line.\n"
-+msgstr "警告, ��unixラインを得���.\n"
-+
-+# translatable?
-+#: ../netstat.c:1155
-+msgid "STREAM"
-+msgstr "STREAM"
-+
-+# translatable?
-+#: ../netstat.c:1159
-+msgid "DGRAM"
-+msgstr "DGRAM"
-+
-+# translatable?
-+#: ../netstat.c:1163
-+msgid "RAW"
-+msgstr "RAW"
-+
-+# translatable?
-+#: ../netstat.c:1167
-+msgid "RDM"
-+msgstr "RDM"
-+
-+# translatable?
-+#: ../netstat.c:1171
-+msgid "SEQPACKET"
-+msgstr "SEQPACKET"
-+
-+# translatable?
-+#: ../netstat.c:1180
-+msgid "FREE"
-+msgstr "FREE"
-+
-+# translatable?
-+#: ../netstat.c:1196
-+msgid "CONNECTING"
-+msgstr "CONNECTING"
-+
-+# translatable?
-+#: ../netstat.c:1200
-+msgid "CONNECTED"
-+msgstr "CONNECTED"
-+
-+# translatable?
-+#: ../netstat.c:1204
-+msgid "DISCONNECTING"
-+msgstr "DISCONNECTING"
-+
-+#: ../netstat.c:1235
-+#, c-format
-+msgid "Active UNIX domain sockets "
-+msgstr "稼�中�UNIXドメインソケット "
-+
-+#: ../netstat.c:1237 ../netstat.c:1756
-+#, c-format
-+msgid "(servers and established)"
-+msgstr "(サー��確立)"
-+
-+#: ../netstat.c:1240 ../netstat.c:1759
-+#, c-format
-+msgid "(only servers)"
-+msgstr "(サー���)"
-+
-+#: ../netstat.c:1242 ../netstat.c:1761
-+#, c-format
-+msgid "(w/o servers)"
-+msgstr "(w/oサー�)"
-+
-+#: ../netstat.c:1245
-+#, c-format
-+msgid ""
-+"\n"
-+"Proto RefCnt Flags       Type       State         I-Node"
-+msgstr ""
-+"\n"
-+"Proto RefCnt フラグ      タイプ     状態         Iノード"
-+
-+#: ../netstat.c:1247
-+#, c-format
-+msgid " Path\n"
-+msgstr " パス\n"
-+
-+# translatable?
-+#: ../netstat.c:1267
-+msgid "SABM SENT"
-+msgstr "SABM SENT"
-+
-+# translatable?
-+#: ../netstat.c:1270
-+msgid "RECOVERY"
-+msgstr "RECOVERY"
-+
-+#: ../netstat.c:1284
-+#, c-format
-+msgid "Active AX.25 sockets\n"
-+msgstr "稼�中�AX.25ソケット\n"
-+
-+#: ../netstat.c:1285
-+#, c-format
-+msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+msgstr "�信先     発信元     デ�イス 状態        Vr/Vs    �信-Q  �信-Q\n"
-+
-+#: ../netstat.c:1328
-+#, c-format
-+msgid "problem reading data from %s\n"
-+msgstr "%s�ら�データ読�込�中��題\n"
-+
-+#: ../netstat.c:1379
-+#, c-format
-+msgid ""
-+"Active IPX sockets\n"
-+"Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+"State"
-+msgstr ""
-+"稼�中�IPXソケット\n"
-+"Proto �信-Q �信-Q 内部アドレス               外部アドレス               状"
-+"æ…‹"
-+
-+#: ../netstat.c:1381
-+#, c-format
-+msgid " User"
-+msgstr " ユーザ"
-+
-+# translatable?
-+#: ../netstat.c:1415
-+msgid "ESTAB"
-+msgstr "ESTAB"
-+
-+# translatable?
-+#: ../netstat.c:1423
-+msgid "UNK."
-+msgstr "UNK."
-+
-+#: ../netstat.c:1461
-+#, c-format
-+msgid "Kernel Interface table\n"
-+msgstr "カー�ルインタフェーステーブル\n"
-+
-+#: ../netstat.c:1465
-+#, c-format
-+msgid ""
-+"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+"Flg\n"
-+msgstr "Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR フラグ\n"
-+
-+#: ../netstat.c:1469
-+msgid "missing interface information"
-+msgstr "インタフェース情報�足り��ん"
-+
-+#: ../netstat.c:1492
-+#, c-format
-+msgid ""
-+"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-+"help}\n"
-+msgstr ""
-+"使用法: netstat [-veenNcCF] [<アドレスファミリ>] -r\n"
-+"        netstat {-V|--version|-h|--help}\n"
-+
-+#: ../netstat.c:1493
-+#, c-format
-+msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+msgstr "        netstat [-vnNcaeol] [<ソケット> ...]\n"
-+
-+#: ../netstat.c:1494
-+#, c-format
-+msgid ""
-+"       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+"\n"
-+msgstr "        netstat { [-veenNac] -i | [-cnNe] -M | -s }\n\n"
-+
-+#: ../netstat.c:1496
-+#, c-format
-+msgid "        -r, --route              display routing table\n"
-+msgstr "        -r, --routing            経路テーブル�表示\n"
-+
-+#: ../netstat.c:1497
-+#, c-format
-+msgid "        -i, --interfaces         display interface table\n"
-+msgstr "        -i, --interfaces         インタフェーステーブル�表示\n"
-+
-+#: ../netstat.c:1498
-+#, c-format
-+msgid "        -g, --groups             display multicast group memberships\n"
-+msgstr "        -g, --groups             マル�キャスト・グループメン�シップ�表示\n"
-+
-+#: ../netstat.c:1499
-+#, c-format
-+msgid ""
-+"        -s, --statistics         display networking statistics (like SNMP)\n"
-+msgstr ""
-+"        -s, --statistics         (SNMP�よ��)�ットワーク統計を表示\n"
-+
-+#: ../netstat.c:1501
-+#, c-format
-+msgid ""
-+"        -M, --masquerade         display masqueraded connections\n"
-+"\n"
-+msgstr ""
-+"        -M, --masquerade         マスカレード接続�表示\n"
-+"\n"
-+
-+#: ../netstat.c:1505
-+#, c-format
-+msgid "        --numeric-hosts          don't resolve host names\n"
-+msgstr "        --numeric-hosts          ホスト�をレゾルブ���\n"
-+
-+#: ../netstat.c:1506
-+#, c-format
-+msgid "        --numeric-ports          don't resolve port names\n"
-+msgstr "        --numeric-ports          �ート�をレゾルブ���\n"
-+
-+#: ../netstat.c:1507
-+#, c-format
-+msgid "        --numeric-users          don't resolve user names\n"
-+msgstr "        --numeric-users          ユーザ�をレゾルブ���\n"
-+
-+#: ../netstat.c:1508
-+#, c-format
-+msgid "        -N, --symbolic           resolve hardware names\n"
-+msgstr "        -N, --symbolic           �ードウェア�をレゾルブ�る\n"
-+
-+#: ../netstat.c:1509 ../route.c:88
-+#, c-format
-+msgid "        -e, --extend             display other/more information\n"
-+msgstr "        -e, --extend             他�情報や多��情報を表示�る\n"
-+
-+#: ../netstat.c:1510
-+#, c-format
-+msgid "        -p, --programs           display PID/Program name for sockets\n"
-+msgstr "        -p, --programs           ソケット�PID/プログラム�を表示�る\n"
-+
-+#: ../netstat.c:1511
-+#, c-format
-+msgid ""
-+"        -c, --continuous         continuous listing\n"
-+"\n"
-+msgstr ""
-+"        -c, --continous          継続的�表示\n"
-+"\n"
-+
-+#: ../netstat.c:1512
-+#, c-format
-+msgid "        -l, --listening          display listening server sockets\n"
-+msgstr "        -l, --listening          サー��listenソケット�表示\n"
-+
-+#: ../netstat.c:1513
-+#, c-format
-+msgid ""
-+"        -a, --all, --listening   display all sockets (default: connected)\n"
-+msgstr "        -a, --all, --listening   全��情報を表示 (標準: connected)\n"
-+
-+#: ../netstat.c:1514
-+#, c-format
-+msgid "        -o, --timers             display timers\n"
-+msgstr "        -o, --timers             タイマ�表示\n"
-+
-+#: ../netstat.c:1515 ../route.c:89
-+#, c-format
-+msgid ""
-+"        -F, --fib                display Forwarding Information Base "
-+"(default)\n"
-+msgstr "        -F, --fib                フォワード情報ベースを表示�る(標準)\n"
-+
-+#: ../netstat.c:1516 ../route.c:90
-+#, c-format
-+msgid ""
-+"        -C, --cache              display routing cache instead of FIB\n"
-+"\n"
-+msgstr "        -C, --cache              FIB���り�経路キャッシュを表示�る\n\n"
-+
-+#: ../netstat.c:1518
-+#, c-format
-+msgid ""
-+"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
-+msgstr ""
-+"  <ソケット>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-+"netrom\n"
-+
-+#: ../netstat.c:1519
-+#, c-format
-+msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>='-6|-4'���'-A <af>'���'--<af>'を利用; 標準: %s\n"
-+
-+#: ../netstat.c:1520 ../route.c:93
-+#, c-format
-+msgid "  List of possible address families (which support routing):\n"
-+msgstr "  (ルーティングをサ�ート��)利用�能�アドレスファミリ�リスト:\n"
-+
-+#: ../netstat.c:1753
-+#, c-format
-+msgid "Active Internet connections "
-+msgstr "稼�中�インター�ット接続 "
-+
-+#: ../netstat.c:1763
-+#, c-format
-+msgid ""
-+"\n"
-+"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-+"State      "
-+msgstr ""
-+"\n"
-+"Proto �信-Q �信-Q 内部アドレス            外部アドレス            状"
-+"æ…‹       "
-+
-+#: ../netstat.c:1765
-+#, c-format
-+msgid " User       Inode     "
-+msgstr " ユーザ    Iノード    "
-+
-+#: ../netstat.c:1768
-+#, c-format
-+msgid " Timer"
-+msgstr "タイマ"
-+
-+#: ../netstat.c:1798
-+#, c-format
-+msgid "IPv4 Group Memberships\n"
-+msgstr "IPv4グループメン�シップ\n"
-+
-+#: ../netstat.c:1799
-+#, c-format
-+msgid "Interface       RefCnt Group\n"
-+msgstr "インタフェース �照Cnt グループ\n"
-+
-+#: ../rarp.c:44
-+msgid "This kernel does not support RARP.\n"
-+msgstr "��カー�ル�RARPをサ�ート�����ん.\n"
-+
-+#: ../rarp.c:83
-+#, c-format
-+msgid "no RARP entry for %s.\n"
-+msgstr "%s�RARPエントリ��り��ん.\n"
-+
-+#: ../rarp.c:96
-+#, c-format
-+msgid "%s: bad hardware address\n"
-+msgstr "%s: �正��ードウェアアドレス��\n"
-+
-+#: ../rarp.c:128
-+#, c-format
-+msgid "rarp: cannot open file %s:%s.\n"
-+msgstr "rarp: ファイル%sを開���ん:%s.\n"
-+
-+#: ../rarp.c:140
-+#, c-format
-+msgid "rarp: format error at %s:%u\n"
-+msgstr "rarp: %s:%u行�フォーマットエラー��り��\n"
-+
-+#: ../rarp.c:144 ../rarp.c:289
-+#, c-format
-+msgid "rarp: %s: unknown host\n"
-+msgstr "rarp: %s: �明�ホスト��\n"
-+
-+#: ../rarp.c:147
-+#, c-format
-+msgid "rarp: cannot set entry from %s:%u\n"
-+msgstr "rarp: %s:%u行�らエントリを設定����ん\n"
-+
-+#: ../rarp.c:176
-+#, c-format
-+msgid "Usage: rarp -a                               list entries in cache.\n"
-+msgstr ""
-+"使用法: rarp -a                              キャッシュエントリ�表示.\n"
-+
-+#: ../rarp.c:177
-+#, c-format
-+msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+msgstr ""
-+"       rarp -d <ホスト�>                    キャッシュ�らエントリを削除�"
-+"ã‚‹.\n"
-+
-+#: ../rarp.c:178
-+#, c-format
-+msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+msgstr ""
-+"       rarp [<HW>] -s <ホスト�> <�ードウェアアドレス>\n"
-+"                                             キャッシュ�エントリを追加.\n"
-+
-+#: ../rarp.c:179
-+#, c-format
-+msgid ""
-+"       rarp -f                               add entries from /etc/ethers.\n"
-+msgstr ""
-+"       rarp -f                               /etc/ethers�らエントリ追加.\n"
-+
-+#: ../rarp.c:180
-+#, c-format
-+msgid ""
-+"       rarp -V                               display program version.\n"
-+"\n"
-+msgstr "       rarp -V                               �ージョン情報�出力.\n"
-+
-+#: ../rarp.c:238
-+#, c-format
-+msgid "%s: illegal option mix.\n"
-+msgstr "%s: オプション�組���間������.\n"
-+
-+#: ../rarp.c:269
-+#, c-format
-+msgid "rarp: %s: unknown hardware type.\n"
-+msgstr "rarp: %s: �ードウェアタイプ��明��.\n"
-+
-+#: ../route.c:80
-+#, c-format
-+msgid ""
-+"Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+msgstr "使用法:route [-nNvee] [-FC] [アドレスファミリ]  カー�ル経路テーブル�表示.\n"
-+
-+#: ../route.c:81
-+#, c-format
-+msgid ""
-+"       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+"\n"
-+msgstr ""
-+"       route [-v] [-FC] {add|del|flush}‥‥\n"
-+"\t\t\t\t   アドレスファミリ�経路テーブル�設定.\n"
-+"\n"
-+
-+#: ../route.c:83
-+#, c-format
-+msgid ""
-+"       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+"specified AF.\n"
-+msgstr ""
-+"       route {-h|--help} [アドレスファミリ]\n"
-+"                                     アドレスファミリ特定�文法�説明.\n"
-+
-+#: ../route.c:84
-+#, c-format
-+msgid ""
-+"       route {-V|--version}                  Display version/author and "
-+"exit.\n"
-+"\n"
-+msgstr "       route {-V|--version}          �ージョン/作者情報�出力�終了.\n\n"
-+
-+#: ../route.c:92
-+#, c-format
-+msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-+msgstr "  <AF>='-A <af>'���'--<af>'を利用; 標準: %s\n"
-+
-+#: ../plipconfig.c:66
-+#, c-format
-+msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+msgstr "使用法: plipconfig [-a] [-i] [-v] インタフェース\n"
-+
-+#: ../plipconfig.c:67
-+#, c-format
-+msgid "                  [nibble NN] [trigger NN]\n"
-+msgstr "                  [nibble 数値] [trigger 数値]\n"
-+
-+#: ../plipconfig.c:68
-+#, c-format
-+msgid "       plipconfig -V | --version\n"
-+msgstr "       plipconfig -V | --version\n"
-+
-+# translatable?
-+#: ../plipconfig.c:74
-+#, c-format
-+msgid "%s\tnibble %lu  trigger %lu\n"
-+msgstr "%s\tnibble %lu  trigger %lu\n"
-+
-+#: ../iptunnel.c:85
-+#, c-format
-+msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+msgstr "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+
-+#: ../iptunnel.c:86
-+#, c-format
-+msgid ""
-+"          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+msgstr "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+
-+#: ../iptunnel.c:87
-+#, c-format
-+msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+msgstr "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+
-+#: ../iptunnel.c:88
-+#, c-format
-+msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+
-+#: ../iptunnel.c:89
-+#, c-format
-+msgid ""
-+"       iptunnel -V | --version\n"
-+"\n"
-+msgstr "       iptunnel -V | --version\n\n"
-+
-+#: ../iptunnel.c:90
-+#, c-format
-+msgid "Where: NAME := STRING\n"
-+msgstr "�味: NAME := STRING\n"
-+
-+#: ../iptunnel.c:91
-+#, c-format
-+msgid "       ADDR := { IP_ADDRESS | any }\n"
-+msgstr "       ADDR := { IP_ADDRESS | any }\n"
-+
-+#: ../iptunnel.c:92
-+#, c-format
-+msgid "       TOS  := { NUMBER | inherit }\n"
-+msgstr "       TOS  := { NUMBER | inherit }\n"
-+
-+#: ../iptunnel.c:93
-+#, c-format
-+msgid "       TTL  := { 1..255 | inherit }\n"
-+msgstr "       TTL  := { 1..255 | inherit }\n"
-+
-+#: ../iptunnel.c:94
-+#, c-format
-+msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+msgstr "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+
-+#: ../iptunnel.c:332
-+#, c-format
-+msgid "Keys are not allowed with ipip and sit.\n"
-+msgstr "キー�ipip�よ�sit��許��れ��ん.\n"
-+
-+#: ../iptunnel.c:352
-+#, c-format
-+msgid "Broadcast tunnel requires a source address.\n"
-+msgstr "ブロードキャストトン�ル�発信元アドレス�必���.\n"
-+
-+#: ../iptunnel.c:367
-+#, c-format
-+msgid "ttl != 0 and noptmudisc are incompatible\n"
-+msgstr "ttl != 0�よ�noptmudisc�矛盾���\n"
-+
-+#: ../iptunnel.c:379
-+#, c-format
-+msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+msgstr "トン�ルモードを決定����ん(ipip, gre���sit)\n"
-+
-+#: ../iptunnel.c:417
-+#, c-format
-+msgid "%s: %s/ip  remote %s  local %s "
-+msgstr "%s: %s/ip  リモート%s  ローカル%s "
-+
-+#: ../iptunnel.c:421
-+msgid "unknown"
-+msgstr "�明"
-+
-+# FIXME: what does it mean?
-+#: ../iptunnel.c:453
-+#, c-format
-+msgid "  Drop packets out of sequence.\n"
-+msgstr "  シーケンス�ら外れ�パケットをドロップ.\n"
-+
-+#: ../iptunnel.c:455
-+#, c-format
-+msgid "  Checksum in received packet is required.\n"
-+msgstr "  �信パケット��ェックサム�必須��.\n"
-+
-+# FIXME: what does it mean?
-+#: ../iptunnel.c:457
-+#, c-format
-+msgid "  Sequence packets on output.\n"
-+msgstr "  �信�シーケンスパケット.\n"
-+
-+# FIXME: what does it mean?
-+#: ../iptunnel.c:459
-+#, c-format
-+msgid "  Checksum output packets.\n"
-+msgstr "  �信パケット��ェックサム.\n"
-+
-+#: ../iptunnel.c:487
-+#, c-format
-+msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+msgstr "/proc/net/dev��正�フォーマット��. ����ん.\n"
-+
-+#: ../iptunnel.c:500
-+#, c-format
-+msgid "Failed to get type of [%s]\n"
-+msgstr "[%s]�タイプ��得�失敗\n"
-+
-+#: ../iptunnel.c:516
-+#, c-format
-+msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+msgstr "RX: パケット   �イト      エラー  CsumErrs outOfSeq マル�キャスト\n"
-+
-+#: ../iptunnel.c:519
-+#, c-format
-+msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+msgstr "TX: パケット   �イト       エラー DeadLoop NoRoute  �ッファ��\n"
-+
-+#: ../statistics.c:47
-+msgid "ICMP input histogram:"
-+msgstr "ICMP入力ヒストグラム:"
-+
-+#: ../statistics.c:48
-+msgid "ICMP output histogram:"
-+msgstr "ICMP出力ヒストグラム:"
-+
-+#: ../statistics.c:65
-+#, c-format
-+msgid "Forwarding is %s"
-+msgstr "フォワード�%s��"
-+
-+#: ../statistics.c:66
-+#, c-format
-+msgid "Default TTL is %u"
-+msgstr "標準TTL�%u��"
-+
-+#: ../statistics.c:67
-+#, c-format
-+msgid "%u total packets received"
-+msgstr "�計%uパケットを�信"
-+
-+#: ../statistics.c:68
-+#, c-format
-+msgid "%u with invalid headers"
-+msgstr "��当�ヘッダ�%u"
-+
-+#: ../statistics.c:69
-+#, c-format
-+msgid "%u with invalid addresses"
-+msgstr "��当�アドレス�%u"
-+
-+#: ../statistics.c:70
-+#, c-format
-+msgid "%u forwarded"
-+msgstr "%u�転�"
-+
-+#: ../statistics.c:71
-+#, c-format
-+msgid "%u with unknown protocol"
-+msgstr "%u��明�プロトコル"
-+
-+#: ../statistics.c:72
-+#, c-format
-+msgid "%u incoming packets discarded"
-+msgstr "%u��信パケットを破棄"
-+
-+#: ../statistics.c:73
-+#, c-format
-+msgid "%u incoming packets delivered"
-+msgstr "%u��信パケットを��"
-+
-+#: ../statistics.c:74
-+#, c-format
-+msgid "%u requests sent out"
-+msgstr "%u��求を�信"
-+
-+#. ?
-+#: ../statistics.c:75
-+#, c-format
-+msgid "%u outgoing packets dropped"
-+msgstr "%u��信パケットをドロップ"
-+
-+#: ../statistics.c:76
-+#, c-format
-+msgid "%u dropped because of missing route"
-+msgstr "�明�経路�%uをドロップ"
-+
-+#: ../statistics.c:77
-+#, c-format
-+msgid "%u fragments dropped after timeout"
-+msgstr "タイムアウト後�%u�フラグメントをドロップ"
-+
-+#: ../statistics.c:78
-+#, c-format
-+msgid "%u reassemblies required"
-+msgstr "%u��構築�必�"
-+
-+#. ?
-+#: ../statistics.c:79
-+#, c-format
-+msgid "%u packets reassembled ok"
-+msgstr "%uパケット��構築��功"
-+
-+#: ../statistics.c:80
-+#, c-format
-+msgid "%u packet reassembles failed"
-+msgstr "%uパケット��構築�失敗"
-+
-+#: ../statistics.c:81
-+#, c-format
-+msgid "%u fragments received ok"
-+msgstr "%uフラグメント��信��功"
-+
-+#: ../statistics.c:82
-+#, c-format
-+msgid "%u fragments failed"
-+msgstr "%uフラグメント�失敗"
-+
-+#: ../statistics.c:83
-+#, c-format
-+msgid "%u fragments created"
-+msgstr "%uフラグメントを生�"
-+
-+#: ../statistics.c:88
-+#, c-format
-+msgid "%u ICMP messages received"
-+msgstr "%u�ICMPメッセージ�信"
-+
-+#: ../statistics.c:89
-+#, c-format
-+msgid "%u input ICMP message failed."
-+msgstr "%u�ICMPメッセージ入力失敗."
-+
-+#: ../statistics.c:90 ../statistics.c:103
-+#, c-format
-+msgid "destination unreachable: %u"
-+msgstr "�信先到���: %u"
-+
-+#: ../statistics.c:91
-+#, c-format
-+msgid "timeout in transit: %u"
-+msgstr "�信時間オー�: %u"
-+
-+#: ../statistics.c:92 ../statistics.c:105
-+#, c-format
-+msgid "wrong parameters: %u"
-+msgstr "���パラメータ: %u"
-+
-+#. ?
-+#: ../statistics.c:93
-+#, c-format
-+msgid "source quenches: %u"
-+msgstr "発信元消滅: %u"
-+
-+#: ../statistics.c:94
-+#, c-format
-+msgid "redirects: %u"
-+msgstr "リダイレクト: %u"
-+
-+#: ../statistics.c:95
-+#, c-format
-+msgid "echo requests: %u"
-+msgstr "エコー�求: %u"
-+
-+#: ../statistics.c:96 ../statistics.c:109
-+#, c-format
-+msgid "echo replies: %u"
-+msgstr "エコー応答: %u"
-+
-+#: ../statistics.c:97
-+#, c-format
-+msgid "timestamp request: %u"
-+msgstr "タイムスタンプ�求: %u"
-+
-+#: ../statistics.c:98
-+#, c-format
-+msgid "timestamp reply: %u"
-+msgstr "タイムスタンプ応答: %u"
-+
-+#: ../statistics.c:99
-+#, c-format
-+msgid "address mask request: %u"
-+msgstr "アドレスマスク�求: %u"
-+
-+#. ?
-+#: ../statistics.c:100 ../statistics.c:113
-+#, c-format
-+msgid "address mask replies: %u"
-+msgstr "アドレスマスク応答: %u"
-+
-+#. ?
-+#: ../statistics.c:101
-+#, c-format
-+msgid "%u ICMP messages sent"
-+msgstr "%u�ICMPメッセージ�信"
-+
-+#: ../statistics.c:102
-+#, c-format
-+msgid "%u ICMP messages failed"
-+msgstr "%u�ICMPメッセージ失敗"
-+
-+#: ../statistics.c:104
-+#, c-format
-+msgid "time exceeded: %u"
-+msgstr "時間切れ: %u"
-+
-+#. ?
-+#: ../statistics.c:106
-+#, c-format
-+msgid "source quench: %u"
-+msgstr "発信元消滅: %u"
-+
-+#: ../statistics.c:107
-+#, c-format
-+msgid "redirect: %u"
-+msgstr "リダイレクト: %u"
-+
-+#: ../statistics.c:108
-+#, c-format
-+msgid "echo request: %u"
-+msgstr "エコー�求: %u"
-+
-+#: ../statistics.c:110
-+#, c-format
-+msgid "timestamp requests: %u"
-+msgstr "タイムスタンプ�求: %u"
-+
-+#: ../statistics.c:111
-+#, c-format
-+msgid "timestamp replies: %u"
-+msgstr "タイムスタンプ応答: %u"
-+
-+#: ../statistics.c:112
-+#, c-format
-+msgid "address mask requests: %u"
-+msgstr "アドレスマスク�求: %u"
-+
-+#: ../statistics.c:118
-+#, c-format
-+msgid "RTO algorithm is %s"
-+msgstr "RTOアルゴリズム�%s��"
-+
-+#: ../statistics.c:122
-+#, c-format
-+msgid "%u active connections openings"
-+msgstr "%u�能動接続開始"
-+
-+#: ../statistics.c:123
-+#, c-format
-+msgid "%u passive connection openings"
-+msgstr "%u��動接続開始"
-+
-+#: ../statistics.c:124
-+#, c-format
-+msgid "%u failed connection attempts"
-+msgstr "%u�接続試行失敗"
-+
-+#: ../statistics.c:125
-+#, c-format
-+msgid "%u connection resets received"
-+msgstr "%u�接続リセット�信"
-+
-+#: ../statistics.c:126
-+#, c-format
-+msgid "%u connections established"
-+msgstr "%u�接続確立"
-+
-+#: ../statistics.c:127
-+#, c-format
-+msgid "%u segments received"
-+msgstr "%uセグメント��信"
-+
-+#: ../statistics.c:128
-+#, c-format
-+msgid "%u segments send out"
-+msgstr "%uセグメント��信"
-+
-+#: ../statistics.c:129
-+#, c-format
-+msgid "%u segments retransmited"
-+msgstr "%uセグメント��転�"
-+
-+#: ../statistics.c:130
-+#, c-format
-+msgid "%u bad segments received."
-+msgstr "%u��正セグメント�信."
-+
-+#: ../statistics.c:131
-+#, c-format
-+msgid "%u resets sent"
-+msgstr "%u�リセット�信"
-+
-+#: ../statistics.c:136
-+#, c-format
-+msgid "%u packets received"
-+msgstr "%uパケット�信"
-+
-+#: ../statistics.c:137
-+#, c-format
-+msgid "%u packets to unknown port received."
-+msgstr "�明��ート�ら�%uパケット��信."
-+
-+#: ../statistics.c:138
-+#, c-format
-+msgid "%u packet receive errors"
-+msgstr "%u�パケット�信エラー"
-+
-+#: ../statistics.c:139
-+#, c-format
-+msgid "%u packets sent"
-+msgstr "%u�パケットを�信"
-+
-+#: ../statistics.c:144
-+#, c-format
-+msgid "%u SYN cookies sent"
-+msgstr "%u�SYNクッキーを�信"
-+
-+#: ../statistics.c:145
-+#, c-format
-+msgid "%u SYN cookies received"
-+msgstr "%u�SYNクッキーを�信"
-+
-+#: ../statistics.c:146
-+#, c-format
-+msgid "%u invalid SYN cookies received"
-+msgstr "%u���当�SYNクッキーを�信"
-+
-+#: ../statistics.c:148
-+#, c-format
-+msgid "%u resets received for embryonic SYN_RECV sockets"
-+msgstr "%u�未完��SYN_RECVソケット�対�るリセットを�信"
-+
-+#: ../statistics.c:150
-+#, c-format
-+msgid "%u packets pruned from receive queue because of socket buffer overrun"
-+msgstr "%u�パケットをソケット�ッファオー�ラン����信キュー�ら除外"
-+
-+#. obsolete: 2.2.0 doesn't do that anymore
-+#: ../statistics.c:153
-+#, c-format
-+msgid "%u packets pruned from receive queue"
-+msgstr "%u�パケットを�信キュー�ら除外"
-+
-+#: ../statistics.c:154
-+#, c-format
-+msgid ""
-+"%u packets dropped from out-of-order queue because of socket buffer overrun"
-+msgstr "%u�パケット�ソケット�ッファオー�ーラン���out-of-orderキュー�らドロップ"
-+
-+#: ../statistics.c:156
-+#, c-format
-+msgid "%u ICMP packets dropped because they were out-of-window"
-+msgstr "%u�ICMPパケット�out-of-window���ドロップ"
-+
-+#: ../statistics.c:158
-+#, c-format
-+msgid "%u ICMP packets dropped because socket was locked"
-+msgstr "%u�ICMPパケットをソケット�ロック�よ��ドロップ"
-+
-+# FIXME: what does it mean?
-+#: ../statistics.c:160
-+#, c-format
-+msgid "%u TCP sockets finished time wait in fast timer"
-+msgstr "%u�TCPソケット�ファーストタイマ��時間待�を完了"
-+
-+# FIXME
-+#: ../statistics.c:161
-+#, c-format
-+msgid "%u time wait sockets recycled by time stamp"
-+msgstr "%u�時間待�ソケット�タイムスタンプ��利用"
-+
-+# FIXME
-+#: ../statistics.c:162
-+#, c-format
-+msgid "%u TCP sockets finished time wait in slow timer"
-+msgstr "%u�TCPソケット�スロータイマ��時間待�を完了"
-+
-+#: ../statistics.c:163
-+#, c-format
-+msgid "%u passive connections rejected because of time stamp"
-+msgstr "%u��動的接続�タイムスタンプ����拒�"
-+
-+#: ../statistics.c:165
-+#, c-format
-+msgid "%u active connections rejected because of time stamp"
-+msgstr "%u�能動的接続�タイムスタンプ����拒�"
-+
-+#: ../statistics.c:167
-+#, c-format
-+msgid "%u packets rejects in established connections because of timestamp"
-+msgstr "%u�パケット�タイムスタンプ����接続確立を拒�"
-+
-+#: ../statistics.c:169
-+#, c-format
-+msgid "%u delayed acks sent"
-+msgstr "%u��延ackを�信"
-+
-+# FIXME
-+#: ../statistics.c:170
-+#, c-format
-+msgid "%u delayed acks further delayed because of locked socket"
-+msgstr "%u��延ack�ロック�れ�ソケット�����ら��延"
-+
-+#: ../statistics.c:172
-+#, c-format
-+msgid "Quick ack mode was activated %u times"
-+msgstr "クイックackモード�%u回稼�"
-+
-+# FIXME
-+#: ../statistics.c:173
-+#, c-format
-+msgid "%u times the listen queue of a socket overflowed"
-+msgstr "ソケット�リスンキュー�%u回オー�フロー"
-+
-+# FIXME
-+#: ../statistics.c:175
-+#, c-format
-+msgid "%u SYNs to LISTEN sockets ignored"
-+msgstr "%u�ソケットリスンSYN�無視"
-+
-+#: ../statistics.c:176
-+#, c-format
-+msgid "%u packets directly queued to recvmsg prequeue."
-+msgstr "%uパケットをrecvmsgプレキュー�直接キュー."
-+
-+#: ../statistics.c:178
-+#, c-format
-+msgid "%u of bytes directly received from backlog"
-+msgstr "%u�イトを�ックログ�ら直接�信"
-+
-+#: ../statistics.c:180
-+#, c-format
-+msgid "%u of bytes directly received from prequeue"
-+msgstr "%u�イトをプレキュー�ら直接�信"
-+
-+#: ../statistics.c:182
-+#, c-format
-+msgid "%u packets dropped from prequeue"
-+msgstr "%u�パケットをプレキュー�らドロップ"
-+
-+#: ../statistics.c:183
-+#, c-format
-+msgid "%u packet headers predicted"
-+msgstr "%u�パケットヘッダを予測"
-+
-+#: ../statistics.c:184
-+#, c-format
-+msgid "%u packets header predicted and directly queued to user"
-+msgstr "%u�パケットヘッダを予測��ユーザ�直接キュー"
-+
-+#: ../statistics.c:186
-+#, c-format
-+msgid "Ran %u times out of system memory during packet sending"
-+msgstr "%u回�パケット�信中�システムメモリ��れ"
-+
-+#: ../statistics.c:188
-+#, c-format
-+msgid "%u acknowledgments not containing data received"
-+msgstr "データを����%u�承���信"
-+
-+#: ../statistics.c:189
-+#, c-format
-+msgid "%u predicted acknowledgments"
-+msgstr "%u�予測承�"
-+
-+#: ../statistics.c:190
-+#, c-format
-+msgid "%u times recovered from packet loss due to fast retransmit"
-+msgstr "高速����よるパケットロス�%u回�回復"
-+
-+#: ../statistics.c:191
-+#, c-format
-+msgid "%u times recovered from packet loss due to SACK data"
-+msgstr "SACKデータ�よるパケットロス�%u回�回復"
-+
-+#: ../statistics.c:192
-+#, c-format
-+msgid "%u bad SACKs received"
-+msgstr "%u��正�SACKを�信"
-+
-+#: ../statistics.c:193
-+#, c-format
-+msgid "Detected reordering %u times using FACK"
-+msgstr "FACKを使��%u回�検出�れ�並�替�"
-+
-+#: ../statistics.c:194
-+#, c-format
-+msgid "Detected reordering %u times using SACK"
-+msgstr "SACKを使��%u回�検出�れ�並�替�"
-+
-+#: ../statistics.c:195
-+#, c-format
-+msgid "Detected reordering %u times using time stamp"
-+msgstr "タイムスタンプを使��%u回�検出�れ�並�替�"
-+
-+# FIXME:what does it mean?
-+#: ../statistics.c:196
-+#, c-format
-+msgid "Detected reordering %u times using reno fast retransmit"
-+msgstr "高速��を使��%u回�検出�れ�並�替�"
-+
-+#: ../statistics.c:197
-+#, c-format
-+msgid "%u congestion windows fully recovered"
-+msgstr "%u�輻輳ウィンドウを完全�回復"
-+
-+#: ../statistics.c:198
-+#, c-format
-+msgid "%u congestion windows partially recovered using Hoe heuristic"
-+msgstr "Hoeヒューリスティックを使��%u�輻輳ウィンドウを部分的�回復"
-+
-+#: ../statistics.c:199
-+#, c-format
-+msgid "%u congestion window recovered using DSACK"
-+msgstr "DSACKを使��%u�輻輳ウィンドウを回復"
-+
-+#: ../statistics.c:200
-+#, c-format
-+msgid "%u congestion windows recovered after partial ack"
-+msgstr "部分ack後�%u�輻輳ウィンドウを回復"
-+
-+#: ../statistics.c:201
-+#, c-format
-+msgid "%u retransmits lost"
-+msgstr "%u���ロスト"
-+
-+# FIXME
-+#: ../statistics.c:202
-+#, c-format
-+msgid "%u timeouts after reno fast retransmit"
-+msgstr "高速��後�%u�タイムアウト"
-+
-+#: ../statistics.c:203
-+#, c-format
-+msgid "%u timeouts after SACK recovery"
-+msgstr "SACK復元後�%u�タイムアウト"
-+
-+#: ../statistics.c:204
-+#, c-format
-+msgid "%u timeouts in loss state"
-+msgstr "状態ロス��%u�タイムアウト"
-+
-+#: ../statistics.c:205
-+#, c-format
-+msgid "%u fast retransmits"
-+msgstr "%u�高速��"
-+
-+#: ../statistics.c:206
-+#, c-format
-+msgid "%u forward retransmits"
-+msgstr "%u�転���"
-+
-+#: ../statistics.c:207
-+#, c-format
-+msgid "%u retransmits in slow start"
-+msgstr "スロースタート��%u���"
-+
-+#: ../statistics.c:208
-+#, c-format
-+msgid "%u other TCP timeouts"
-+msgstr "%u���他�TCPタイムアウト"
-+
-+# FIXME
-+#: ../statistics.c:209
-+#, c-format
-+msgid "%u reno fast retransmits failed"
-+msgstr "%d�高速��失敗"
-+
-+#: ../statistics.c:210
-+#, c-format
-+msgid "%u sack retransmits failed"
-+msgstr "%u�sack��失敗"
-+
-+# FIXME
-+#: ../statistics.c:211
-+#, c-format
-+msgid "%u times receiver scheduled too late for direct processing"
-+msgstr "直接処������る�スケジュール�れ�%u回�レシー�"
-+
-+# FIXME
-+#: ../statistics.c:212
-+#, c-format
-+msgid "%u packets collapsed in receive queue due to low socket buffer"
-+msgstr "%u�パケットを低ソケット�ッファ�����信キュー�ら除外"
-+
-+#: ../statistics.c:213
-+#, c-format
-+msgid "%u DSACKs sent for old packets"
-+msgstr "%u�DSACKを��パケット����信"
-+
-+#: ../statistics.c:214
-+#, c-format
-+msgid "%u DSACKs sent for out of order packets"
-+msgstr "%u�DSACKを順�外パケット����信"
-+
-+#: ../statistics.c:215
-+#, c-format
-+msgid "%u DSACKs received"
-+msgstr "%u�DSACKを�信"
-+
-+#: ../statistics.c:216
-+#, c-format
-+msgid "%u DSACKs for out of order packets received"
-+msgstr "%u�DSACKを順�外パケット����信"
-+
-+#: ../statistics.c:217
-+#, c-format
-+msgid "%u connections reset due to unexpected SYN"
-+msgstr "予期��SYN����%u�接続をリセット"
-+
-+#: ../statistics.c:218
-+#, c-format
-+msgid "%u connections reset due to unexpected data"
-+msgstr "予期��データ����%u�接続をリセット"
-+
-+#: ../statistics.c:219
-+#, c-format
-+msgid "%u connections reset due to early user close"
-+msgstr "早期�ユーザ�クローズ����%u�接続をリセット"
-+
-+#: ../statistics.c:220
-+#, c-format
-+msgid "%u connections aborted due to memory pressure"
-+msgstr "メモリ�制約����%u�接続を中止"
-+
-+#: ../statistics.c:221
-+#, c-format
-+msgid "%u connections aborted due to timeout"
-+msgstr "タイムアウト����%u�接続を中止"
-+
-+# FIXME
-+#: ../statistics.c:222
-+#, c-format
-+msgid "%u connections aborted after user close in linger timeout"
-+msgstr "ユーザ�長期タイムアウト��クローズ後�%u�接続�中止"
-+
-+#: ../statistics.c:223
-+#, c-format
-+msgid "%u times unabled to send RST due to no memory"
-+msgstr "メモリ�足����RST��信�%u回�能"
-+
-+# FIXME
-+#: ../statistics.c:224
-+#, c-format
-+msgid "TCP ran low on memory %u times"
-+msgstr "TCP�少��メモリ�%u回実行"
-+
-+#: ../statistics.c:225
-+#, c-format
-+msgid "%u TCP data loss events"
-+msgstr "%u�TCPデータ�イベントをロス"
-+
-+#: ../statistics.c:292
-+msgid "enabled"
-+msgstr "有効"
-+
-+#: ../statistics.c:292
-+msgid "disabled"
-+msgstr "無効"
-+
-+#: ../statistics.c:375
-+msgid "error parsing /proc/net/snmp"
-+msgstr "/proc/net/snmp�処�中�エラー�発生����"
-+
-+#: ../statistics.c:388
-+msgid "cannot open /proc/net/snmp"
-+msgstr "/proc/net/snmpを開���ん"
-+
-+#: ../lib/activate.c:69
-+#, c-format
-+msgid "Hardware type `%s' not supported.\n"
-+msgstr "�ードウェアタイプ`%s'�サ�ート�れ����ん.\n"
-+
-+#: ../lib/activate.c:73
-+#, c-format
-+msgid "Cannot change line discipline to `%s'.\n"
-+msgstr "`%s'�line disciplineを変更����ん.\n"
-+
-+#: ../lib/af.c:153 ../lib/hw.c:161
-+msgid "UNSPEC"
-+msgstr "�明��ット"
-+
-+#: ../lib/af.c:155
-+msgid "UNIX Domain"
-+msgstr "UNIXドメイン"
-+
-+#: ../lib/af.c:158
-+msgid "DARPA Internet"
-+msgstr "DARPAインター�ット"
-+
-+#: ../lib/af.c:161
-+msgid "IPv6"
-+msgstr "IPv6"
-+
-+#: ../lib/af.c:164 ../lib/hw.c:182
-+msgid "AMPR AX.25"
-+msgstr "AMPR AX.25"
-+
-+#: ../lib/af.c:167 ../lib/hw.c:188
-+msgid "AMPR NET/ROM"
-+msgstr "AMPR NET/ROM"
-+
-+#: ../lib/af.c:170
-+msgid "Novell IPX"
-+msgstr "Novell IPX"
-+
-+#: ../lib/af.c:173
-+msgid "Appletalk DDP"
-+msgstr "アップルトークDDP"
-+
-+#: ../lib/af.c:176 ../lib/hw.c:223
-+msgid "Econet"
-+msgstr "エコ�ット"
-+
-+#: ../lib/af.c:179
-+msgid "CCITT X.25"
-+msgstr "CCITT X.25"
-+
-+#: ../lib/af.c:182 ../lib/hw.c:185
-+msgid "AMPR ROSE"
-+msgstr "AMPR ROSE"
-+
-+#: ../lib/af.c:185 ../lib/hw.c:173
-+msgid "Ash"
-+msgstr "Ash"
-+
-+#: ../lib/af.c:243
-+#, c-format
-+msgid "Please don't supply more than one address family.\n"
-+msgstr "複数�アドレスファミリを����下��.\n"
-+
-+#: ../lib/af.c:304
-+#, c-format
-+msgid "Too much address family arguments.\n"
-+msgstr "アドレスファミリ�引数�多����.\n"
-+
-+#: ../lib/af.c:315
-+#, c-format
-+msgid "Unknown address family `%s'.\n"
-+msgstr "�明�アドレスファミリ�� `%s'.\n"
-+
-+#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-+#, c-format
-+msgid "in_arcnet(%s): invalid arcnet address!\n"
-+msgstr "in_arcnet(%s): ��当�ARCNETアドレス��!\n"
-+
-+#: ../lib/arcnet.c:97
-+#, c-format
-+msgid "in_arcnet(%s): trailing : ignored!\n"
-+msgstr "in_arcnet(%s): trailing : 無効!\n"
-+
-+# translatable?
-+#: ../lib/arcnet.c:109
-+#, c-format
-+msgid "in_arcnet(%s): trailing junk!\n"
-+msgstr "in_arcnet(%s): trailing junk!\n"
-+
-+#: ../lib/ash.c:81
-+#, c-format
-+msgid "Malformed Ash address"
-+msgstr "異常�Ashアドレス��"
-+
-+#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-+#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-+#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-+msgid "[NONE SET]"
-+msgstr "[設定��]"
-+
-+#: ../lib/ax25.c:97 ../lib/netrom.c:100
-+msgid "Invalid callsign"
-+msgstr "��当�コールサイン��"
-+
-+#: ../lib/ax25.c:110 ../lib/netrom.c:113
-+msgid "Callsign too long"
-+msgstr "コールサイン�長����"
-+
-+#: ../lib/ax25_gr.c:47
-+#, c-format
-+msgid "AX.25 not configured in this system.\n"
-+msgstr "AX.25���システム��設定�れ����ん.\n"
-+
-+#: ../lib/ax25_gr.c:50
-+#, c-format
-+msgid "Kernel AX.25 routing table\n"
-+msgstr "カー�ル AX.25経路テーブル\n"
-+
-+#. xxx
-+#: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-+#, c-format
-+msgid "Destination  Iface    Use\n"
-+msgstr "�信先サイト Iface    使用数\n"
-+
-+#: ../lib/ether.c:74 ../lib/ether.c:91
-+#, c-format
-+msgid "in_ether(%s): invalid ether address!\n"
-+msgstr "in_ether(%s): ��当�イーサアドレス!\n"
-+
-+#: ../lib/ether.c:105
-+#, c-format
-+msgid "in_ether(%s): trailing : ignored!\n"
-+msgstr "in_ether(%s): trailing : 無効!\n"
-+
-+# translatable?
-+#: ../lib/ether.c:117
-+#, c-format
-+msgid "in_ether(%s): trailing junk!\n"
-+msgstr "in_ether(%s): trailing junk!\n"
-+
-+#: ../lib/fddi.c:84 ../lib/fddi.c:99
-+#, c-format
-+msgid "in_fddi(%s): invalid fddi address!\n"
-+msgstr "in_fddi(%s): ��当�fddiアドレス!\n"
-+
-+#: ../lib/fddi.c:111
-+#, c-format
-+msgid "in_fddi(%s): trailing : ignored!\n"
-+msgstr "in_fddi(%s): trailing : 無効!\n"
-+
-+# translatable?
-+#: ../lib/fddi.c:123
-+#, c-format
-+msgid "in_fddi(%s): trailing junk!\n"
-+msgstr "in_fddi(%s): trailing junk!\n"
-+
-+#: ../lib/getroute.c:101 ../lib/setroute.c:80
-+#, c-format
-+msgid "Address family `%s' not supported.\n"
-+msgstr "アドレスファミリ`%s'�サ�ート�れ����ん.\n"
-+
-+#: ../lib/getroute.c:107 ../lib/setroute.c:84
-+#, c-format
-+msgid "No routing for address family `%s'.\n"
-+msgstr "アドレスファミリ`%s'��経路�見��り��ん.\n"
-+
-+#: ../lib/hippi.c:84 ../lib/hippi.c:99
-+#, c-format
-+msgid "in_hippi(%s): invalid hippi address!\n"
-+msgstr "in_hippi(%s): ��当�hippiアドレス��!\n"
-+
-+#: ../lib/hippi.c:111
-+#, c-format
-+msgid "in_hippi(%s): trailing : ignored!\n"
-+msgstr "in_hippi(%s): trailing : 無効!\n"
-+
-+# translatable?
-+#: ../lib/hippi.c:122
-+#, c-format
-+msgid "in_hippi(%s): trailing junk!\n"
-+msgstr "in_hippi(%s): trailing junk!\n"
-+
-+#: ../lib/hw.c:160
-+msgid "Local Loopback"
-+msgstr "ローカルループ�ック"
-+
-+#: ../lib/hw.c:163
-+msgid "Serial Line IP"
-+msgstr "シリアルラインIP"
-+
-+#: ../lib/hw.c:164
-+msgid "VJ Serial Line IP"
-+msgstr "VJシリアルラインIP"
-+
-+#: ../lib/hw.c:165
-+msgid "6-bit Serial Line IP"
-+msgstr "6ビットシリアルラインIP"
-+
-+#: ../lib/hw.c:166
-+msgid "VJ 6-bit Serial Line IP"
-+msgstr "VJ 6ビットシリアルラインIP"
-+
-+#: ../lib/hw.c:167
-+msgid "Adaptive Serial Line IP"
-+msgstr "AdaptiveシリアルラインIP"
-+
-+#: ../lib/hw.c:170
-+msgid "Ethernet"
-+msgstr "イーサ�ット"
-+
-+# translatable?
-+#: ../lib/hw.c:176
-+msgid "Fiber Distributed Data Interface"
-+msgstr "Fiber Distributed Data Interface"
-+
-+#: ../lib/hw.c:179
-+msgid "HIPPI"
-+msgstr "HIPPI"
-+
-+#: ../lib/hw.c:191
-+msgid "generic X.25"
-+msgstr "ジェ�リックX.25"
-+
-+#: ../lib/hw.c:194
-+msgid "IPIP Tunnel"
-+msgstr "IPIPトン�ル"
-+
-+#: ../lib/hw.c:197
-+msgid "Point-to-Point Protocol"
-+msgstr "Point-to-Pointプロトコル"
-+
-+#: ../lib/hw.c:200
-+msgid "(Cisco)-HDLC"
-+msgstr "(Cisco)-HDLC"
-+
-+#: ../lib/hw.c:201
-+msgid "LAPB"
-+msgstr "LAPB"
-+
-+#: ../lib/hw.c:204
-+msgid "ARCnet"
-+msgstr "ARC�ット"
-+
-+#: ../lib/hw.c:207
-+msgid "Frame Relay DLCI"
-+msgstr "フレームリレーDLCI"
-+
-+#: ../lib/hw.c:208
-+msgid "Frame Relay Access Device"
-+msgstr "フレームリレーアクセスデ�イス"
-+
-+#: ../lib/hw.c:211
-+msgid "IPv6-in-IPv4"
-+msgstr "IPv6-in-IPv4"
-+
-+#: ../lib/hw.c:214
-+msgid "IrLAP"
-+msgstr "IrLAP"
-+
-+#: ../lib/hw.c:217
-+msgid "16/4 Mbps Token Ring"
-+msgstr "16/4 Mbpsトークンリング"
-+
-+#: ../lib/hw.c:219
-+msgid "16/4 Mbps Token Ring (New)"
-+msgstr "16/4 Mbpsトークンリング(新)"
-+
-+#: ../lib/hw.c:226
-+msgid "Generic EUI-64"
-+msgstr "ジェ�リックEUI-64"
-+
-+#: ../lib/inet.c:153 ../lib/inet6.c:79
-+#, c-format
-+msgid "rresolve: unsupport address family %d !\n"
-+msgstr "rresolve: アドレスファミリ%dをサ�ート�����ん!\n"
-+
-+#: ../lib/inet6.c:131
-+msgid "[UNKNOWN]"
-+msgstr "[�明]"
-+
-+#: ../lib/inet6_gr.c:71
-+#, c-format
-+msgid "INET6 (IPv6) not configured in this system.\n"
-+msgstr "INET6(IPv6)���システム��利用��るよ�設定�れ����ん.\n"
-+
-+#: ../lib/inet6_gr.c:74
-+#, c-format
-+msgid "Kernel IPv6 routing table\n"
-+msgstr "カー�ルIPv6 経路テーブル\n"
-+
-+#: ../lib/inet6_gr.c:76
-+#, c-format
-+msgid ""
-+"Destination                                 Next "
-+"Hop                                Flags Metric Ref    Use Iface\n"
-+msgstr "�信先サイト                                次回ホップ                             フラグ Metric Ref 使用数 インタフェース\n"
-+
-+#: ../lib/inet6_gr.c:150
-+#, c-format
-+msgid "Kernel IPv6 Neighbour Cache\n"
-+msgstr "カー�ルIPv6 近隣�ットワーク�キャッシュ\n"
-+
-+#: ../lib/inet6_gr.c:153
-+#, c-format
-+msgid ""
-+"Neighbour                                   HW Address        Iface    Flags "
-+"Ref State\n"
-+msgstr ""
-+"近隣サイト                               �ードウェアアドレス Iface   フラグ "
-+"Ref 状態\n"
-+
-+#: ../lib/inet6_gr.c:157
-+#, c-format
-+msgid ""
-+"Neighbour                                   HW Address        Iface    Flags "
-+"Ref State            Stale(sec) Delete(sec)\n"
-+msgstr ""
-+"近隣サイト                               �ードウェアアドレス Iface   フラグ "
-+"Ref 状態             Stale[秒]  Delete[秒]\n"
-+
-+#: ../lib/inet6_sr.c:46
-+#, c-format
-+msgid "Usage: inet6_route [-vF] del Target\n"
-+msgstr "使用法: inet6_route [-vF] del ターゲット\n"
-+
-+#: ../lib/inet6_sr.c:47
-+#, c-format
-+msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+msgstr ""
-+"        inet6_route [-vF] add ターゲット \n"
-+"                    [gw ゲートウェイ] [metric メトリック]\n"
-+"                    [[dev] インタフェース]\n"
-+
-+#: ../lib/inet6_sr.c:48
-+#, c-format
-+msgid "       inet6_route [-FC] flush      NOT supported\n"
-+msgstr "        inet6_route [-FC] flush      サ�ート�����ん\n"
-+
-+#: ../lib/inet6_sr.c:188
-+#, c-format
-+msgid "Flushing `inet6' routing table not supported\n"
-+msgstr "`inet6'経路テーブル�フラッシュ�サ�ート�����ん\n"
-+
-+#: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-+#, c-format
-+msgid "INET (IPv4) not configured in this system.\n"
-+msgstr "INET(IPv4)���システム��利用��るよ��設定�れ����ん.\n"
-+
-+#: ../lib/inet_gr.c:53
-+#, c-format
-+msgid "Kernel IP routing table\n"
-+msgstr "カー�ルIP経路テーブル\n"
-+
-+#: ../lib/inet_gr.c:56
-+#, c-format
-+msgid ""
-+"Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+"Iface\n"
-+msgstr "�信先サイト    ゲートウェイ    �ットマスク   フラグ Metric Ref 使用数 インタフェース\n"
-+
-+#: ../lib/inet_gr.c:59
-+#, c-format
-+msgid ""
-+"Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+"Iface\n"
-+msgstr "�信先サイト    ゲートウェイ    �ットマスク   フラグ   MSS Window  irtt インタフェース\n"
-+
-+#: ../lib/inet_gr.c:62
-+#, c-format
-+msgid ""
-+"Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+"Iface    MSS   Window irtt\n"
-+msgstr ""
-+"�信先サイト   ゲートウェイ    �ットマスク    フラグ Metric Ref 使用数 "
-+"Iface    MSS   Window irtt\n"
-+
-+#: ../lib/inet_gr.c:237
-+#, c-format
-+msgid "Kernel IP routing cache\n"
-+msgstr "カー�ルIP経路キャッシュ\n"
-+
-+#: ../lib/inet_gr.c:258
-+#, c-format
-+msgid ""
-+"Source          Destination     Gateway         Flags Metric Ref    Use "
-+"Iface\n"
-+msgstr "発信元サイト   �信先サイト    ゲートウェイ    フラグ Metric Ref 使用数 インタフェース\n"
-+
-+#: ../lib/inet_gr.c:261
-+#, c-format
-+msgid ""
-+"Source          Destination     Gateway         Flags   MSS Window  irtt "
-+"Iface\n"
-+msgstr "発信元サイト    �信先サイト    ゲートウェイ   フラグ   MSS Window  irtt インタフェース\n"
-+
-+#: ../lib/inet_gr.c:266
-+#, c-format
-+msgid ""
-+"Source          Destination     Gateway         Flags Metric Ref    Use "
-+"Iface    MSS   Window irtt  HH  Arp\n"
-+msgstr ""
-+"発信元サイト    �信先サイト    ゲートウェイ   フラグ Metric Ref 使用数 "
-+"Iface    MSS   Window irtt   HH  Arp\n"
-+
-+#: ../lib/inet_gr.c:290
-+#, c-format
-+msgid ""
-+"Source          Destination     Gateway         Flags Metric Ref    Use "
-+"Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+msgstr ""
-+"発信元サイト   �信先サイト     ゲートウェイ   フラグ Metric Ref 使用数 "
-+"Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+
-+#: ../lib/inet_sr.c:51
-+#, c-format
-+msgid ""
-+"Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+"[[dev] If]\n"
-+msgstr ""
-+"使用法:inet_route [-vF] del {-host|-net} �信先[/プレフィックス]\n"
-+"                   [gw ゲートウェイ] [metric メトリック]\n"
-+"                   [[dev] インタフェース]\n"
-+
-+#: ../lib/inet_sr.c:52
-+#, c-format
-+msgid ""
-+"       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+msgstr ""
-+"       inet_route [-vF] add {-host|-net} �信先[/プレフィックス]\n"
-+"                   [gw ゲートウェイ] [metric メトリック]\n"
-+
-+#: ../lib/inet_sr.c:53
-+#, c-format
-+msgid ""
-+"                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+msgstr "            [netmask �ットマスク] [mss Mss] [window W] [irtt I]\n"
-+
-+#: ../lib/inet_sr.c:54
-+#, c-format
-+msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+msgstr "            [mod] [dyn] [reinstate] [[dev] インタフェース]\n"
-+
-+#: ../lib/inet_sr.c:55
-+#, c-format
-+msgid ""
-+"       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+msgstr ""
-+"       inet_route [-vF] add {-host|-net} �信先[/プレフィックス]\n"
-+"                   [metric メトリック] reject\n"
-+
-+#: ../lib/inet_sr.c:56
-+#, c-format
-+msgid "       inet_route [-FC] flush      NOT supported\n"
-+msgstr "        inet_route [-FC] flush      サ�ート�����ん\n"
-+
-+#: ../lib/inet_sr.c:158
-+#, c-format
-+msgid "route: %s: cannot use a NETWORK as gateway!\n"
-+msgstr "route: %s: NETWORKをゲートウェイ���使���ん!\n"
-+
-+#: ../lib/inet_sr.c:174
-+#, c-format
-+msgid "route: Invalid MSS/MTU.\n"
-+msgstr "route: MSS/MTU���当��.\n"
-+
-+#: ../lib/inet_sr.c:187
-+#, c-format
-+msgid "route: Invalid window.\n"
-+msgstr "route: window���当��.\n"
-+
-+#: ../lib/inet_sr.c:203
-+#, c-format
-+msgid "route: Invalid initial rtt.\n"
-+msgstr "route: �期rtt���当��.\n"
-+
-+#: ../lib/inet_sr.c:261
-+#, c-format
-+msgid "route: netmask %.8x doesn't make sense with host route\n"
-+msgstr "route: �ットマスク%.8x�ホスト経路を検出���ん\n"
-+
-+#: ../lib/inet_sr.c:265
-+#, c-format
-+msgid "route: bogus netmask %s\n"
-+msgstr "route: ���ットマスク`%s'��\n"
-+
-+#: ../lib/inet_sr.c:270
-+#, c-format
-+msgid "route: netmask doesn't match route address\n"
-+msgstr "route: �ットマスク�経路アドレス�一致���ん\n"
-+
-+#: ../lib/inet_sr.c:306
-+#, c-format
-+msgid "Flushing `inet' routing table not supported\n"
-+msgstr "`inet'経路テーブル�フラッシュ�サ�ート�����ん\n"
-+
-+#: ../lib/inet_sr.c:310
-+#, c-format
-+msgid "Modifying `inet' routing cache not supported\n"
-+msgstr "`inet'経路テーブル�変更�サ�ート�����ん\n"
-+
-+#: ../lib/ipx_gr.c:52
-+#, c-format
-+msgid "IPX not configured in this system.\n"
-+msgstr "IPX���システム��設定�れ����ん.\n"
-+
-+#: ../lib/ipx_gr.c:56
-+#, c-format
-+msgid "Kernel IPX routing table\n"
-+msgstr "カー�ルIPX経路テーブル\n"
-+
-+#. xxx
-+#: ../lib/ipx_gr.c:57
-+#, c-format
-+msgid "Destination               Router Net                Router Node\n"
-+msgstr "�信先サイト              ルータ �ット             ルータノード\n"
-+
-+#: ../lib/ipx_sr.c:33
-+#, c-format
-+msgid "IPX: this needs to be written\n"
-+msgstr "IPX: �れ�書�込��必���\n"
-+
-+#: ../lib/masq_info.c:198
-+#, c-format
-+msgid "IP masquerading entries\n"
-+msgstr "IPマスカレード エントリ\n"
-+
-+#: ../lib/masq_info.c:201
-+#, c-format
-+msgid "prot   expire source               destination          ports\n"
-+msgstr "プロト expire 発信元サイト         �信先サイト         �ート\n"
-+
-+#: ../lib/masq_info.c:204
-+#, c-format
-+msgid ""
-+"prot   expire    initseq delta prevd source               "
-+"destination          ports\n"
-+msgstr ""
-+"プロト expire    �期seq delta prevd 発信元サイト         �信先サイ"
-+"ト         �ート\n"
-+
-+#: ../lib/netrom_gr.c:48
-+#, c-format
-+msgid "NET/ROM not configured in this system.\n"
-+msgstr "NET/ROM���システム��利用�能�よ��設定�れ����ん.\n"
-+
-+#: ../lib/netrom_gr.c:51
-+#, c-format
-+msgid "Kernel NET/ROM routing table\n"
-+msgstr "カー�ルNET/ROM経路テーブル\n"
-+
-+#: ../lib/netrom_gr.c:52
-+#, c-format
-+msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+msgstr "�信先サイト ニーモニック �質  近隣サイト インタフェース\n"
-+
-+#: ../lib/netrom_sr.c:34
-+#, c-format
-+msgid "netrom usage\n"
-+msgstr "netrom使用法\n"
-+
-+#: ../lib/netrom_sr.c:44
-+#, c-format
-+msgid "NET/ROM: this needs to be written\n"
-+msgstr "NET/ROM: �れ�書�込��必���\n"
-+
-+#: ../lib/ppp.c:44
-+#, c-format
-+msgid "You cannot start PPP with this program.\n"
-+msgstr "��プログラム��PPPを開始����ん. \n"
-+
-+#: ../lib/ppp_ac.c:38
-+#, c-format
-+msgid "Sorry, use pppd!\n"
-+msgstr "申�訳�り��ん�, pppdを使��下��!\n"
-+
-+#: ../lib/rose.c:87
-+msgid "Node address must be ten digits"
-+msgstr "ノードアドレス�10進数���れ��り��ん"
-+
-+#: ../lib/rose_gr.c:51
-+#, c-format
-+msgid "ROSE not configured in this system.\n"
-+msgstr "ROSE���システム��利用�能�よ��設定�れ����ん\n"
-+
-+#: ../lib/rose_gr.c:54
-+#, c-format
-+msgid "Kernel ROSE routing table\n"
-+msgstr "カー�ルROSE経路テーブル\n"
-+
-+#: ../lib/tr.c:86 ../lib/tr.c:101
-+#, c-format
-+msgid "in_tr(%s): invalid token ring address!\n"
-+msgstr "in_tr(%s): ��当�トークンリングアドレス��!\n"
-+
-+#: ../lib/tr.c:113
-+#, c-format
-+msgid "in_tr(%s): trailing : ignored!\n"
-+msgstr "in_tr(%s): trailing : 無効!\n"
-+
-+# translatable?
-+#: ../lib/tr.c:125
-+#, c-format
-+msgid "in_tr(%s): trailing junk!\n"
-+msgstr "in_tr(%s): trailing junk!\n"
-+
-+#: ../lib/interface.c:176
-+#, c-format
-+msgid "warning: no inet socket available: %s\n"
-+msgstr "警告: Inetソケット�利用����ん: %s\n"
-+
-+#: ../lib/interface.c:325
-+#, c-format
-+msgid "Warning: cannot open %s (%s). Limited output.\n"
-+msgstr "警告: %sを開���ん(%s). �定�れ�出力��.\n"
-+
-+#. Give better error message for this case.
-+#: ../lib/interface.c:571
-+msgid "Device not found"
-+msgstr "デ�イス�見��り��ん"
-+
-+#: ../lib/interface.c:575
-+#, c-format
-+msgid "%s: error fetching interface information: %s\n"
-+msgstr "%s: インタフェース情報を�得中�エラー�発生����: %s\n"
-+
-+#: ../lib/interface.c:608
-+msgid "     - no statistics available -"
-+msgstr "     - 統計情報を利用����ん -"
-+
-+#: ../lib/interface.c:612
-+#, c-format
-+msgid "[NO FLAGS]"
-+msgstr "[フラグ��]"
-+
-+#: ../lib/interface.c:688
-+#, c-format
-+msgid "%-9.9s Link encap:%s  "
-+msgstr "%-9.9s リンク方法:%s  "
-+
-+#: ../lib/interface.c:693
-+#, c-format
-+msgid "HWaddr %s  "
-+msgstr "�ードウェアアドレス %s "
-+
-+#: ../lib/interface.c:696
-+#, c-format
-+msgid "Media:%s"
-+msgstr "メディア:%s"
-+
-+#: ../lib/interface.c:698
-+#, c-format
-+msgid "(auto)"
-+msgstr "(自動)"
-+
-+#: ../lib/interface.c:705
-+#, c-format
-+msgid "          %s addr:%s "
-+msgstr "          %sアドレス:%s"
-+
-+#: ../lib/interface.c:708
-+#, c-format
-+msgid " P-t-P:%s "
-+msgstr " P-t-P:%s "
-+
-+#: ../lib/interface.c:711
-+#, c-format
-+msgid " Bcast:%s "
-+msgstr " ブロードキャスト:%s "
-+
-+#: ../lib/interface.c:713
-+#, c-format
-+msgid " Mask:%s\n"
-+msgstr " マスク:%s\n"
-+
-+#: ../lib/interface.c:730
-+#, c-format
-+msgid "          inet6 addr: %s/%d"
-+msgstr "          inet6アドレス: %s/%d"
-+
-+#: ../lib/interface.c:732
-+#, c-format
-+msgid " Scope:"
-+msgstr " 範囲:"
-+
-+#: ../lib/interface.c:735
-+#, c-format
-+msgid "Global"
-+msgstr "グロー�ル"
-+
-+#: ../lib/interface.c:738
-+#, c-format
-+msgid "Link"
-+msgstr "リンク"
-+
-+#: ../lib/interface.c:741
-+#, c-format
-+msgid "Site"
-+msgstr "サイト"
-+
-+# translatable?
-+#: ../lib/interface.c:744
-+#, c-format
-+msgid "Compat"
-+msgstr "Compat"
-+
-+#: ../lib/interface.c:747
-+#, c-format
-+msgid "Host"
-+msgstr "ホスト"
-+
-+#: ../lib/interface.c:750
-+#, c-format
-+msgid "Unknown"
-+msgstr "�明"
-+
-+#: ../lib/interface.c:765
-+#, c-format
-+msgid "          IPX/Ethernet II addr:%s\n"
-+msgstr "          IPX/イーサ�ットIIアドレス:%s\n"
-+
-+#: ../lib/interface.c:768
-+#, c-format
-+msgid "          IPX/Ethernet SNAP addr:%s\n"
-+msgstr "          IPX/イーサ�ットSNAPアドレス:%s\n"
-+
-+#: ../lib/interface.c:771
-+#, c-format
-+msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+msgstr "          IPX/イーサ�ット802.2アドレス:%s\n"
-+
-+#: ../lib/interface.c:774
-+#, c-format
-+msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+msgstr "          IPX/イーサ�ット802.3アドレス:%s\n"
-+
-+#: ../lib/interface.c:784
-+#, c-format
-+msgid "          EtherTalk Phase 2 addr:%s\n"
-+msgstr "          イーサトーク フェーズ2アドレス:%s\n"
-+
-+#: ../lib/interface.c:793
-+#, c-format
-+msgid "          econet addr:%s\n"
-+msgstr "          エコ�ットアドレス:%s\n"
-+
-+#: ../lib/interface.c:800
-+#, c-format
-+msgid "[NO FLAGS] "
-+msgstr "[フラグ��]"
-+
-+# translatable?
-+#: ../lib/interface.c:802
-+#, c-format
-+msgid "UP "
-+msgstr "UP "
-+
-+# translatable?
-+#: ../lib/interface.c:804
-+#, c-format
-+msgid "BROADCAST "
-+msgstr "BROADCAST "
-+
-+# translatable?
-+#: ../lib/interface.c:806
-+#, c-format
-+msgid "DEBUG "
-+msgstr "DEBUG "
-+
-+# translatable?
-+#: ../lib/interface.c:808
-+#, c-format
-+msgid "LOOPBACK "
-+msgstr "LOOPBACK "
-+
-+# translatable?
-+#: ../lib/interface.c:810
-+#, c-format
-+msgid "POINTOPOINT "
-+msgstr "POINTOPOINT "
-+
-+# translatable?
-+#: ../lib/interface.c:812
-+#, c-format
-+msgid "NOTRAILERS "
-+msgstr "NOTRAILERS "
-+
-+# translatable?
-+#: ../lib/interface.c:814
-+#, c-format
-+msgid "RUNNING "
-+msgstr "RUNNING "
-+
-+# translatable?
-+#: ../lib/interface.c:816
-+#, c-format
-+msgid "NOARP "
-+msgstr "NOARP "
-+
-+# translatable?
-+#: ../lib/interface.c:818
-+#, c-format
-+msgid "PROMISC "
-+msgstr "PROMISC "
-+
-+# translatable?
-+#: ../lib/interface.c:820
-+#, c-format
-+msgid "ALLMULTI "
-+msgstr "ALLMULTI "
-+
-+# translatable?
-+#: ../lib/interface.c:822
-+#, c-format
-+msgid "SLAVE "
-+msgstr "SLAVE "
-+
-+# translatable?
-+#: ../lib/interface.c:824
-+#, c-format
-+msgid "MASTER "
-+msgstr "MASTER "
-+
-+# translatable?
-+#: ../lib/interface.c:826
-+#, c-format
-+msgid "MULTICAST "
-+msgstr "MULTICAST "
-+
-+# translatable?
-+#: ../lib/interface.c:829
-+#, c-format
-+msgid "DYNAMIC "
-+msgstr "DYNAMIC "
-+
-+#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+#: ../lib/interface.c:832
-+#, c-format
-+msgid " MTU:%d  Metric:%d"
-+msgstr " MTU:%d  メトリック:%d"
-+
-+# translatable?
-+#: ../lib/interface.c:836
-+#, c-format
-+msgid "  Outfill:%d  Keepalive:%d"
-+msgstr "  Outfill:%d  キープアライブ:%d"
-+
-+#: ../lib/interface.c:850
-+#, c-format
-+msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+msgstr "RXパケット:%llu エラー:%lu �失:%lu オー�ラン:%lu フレーム:%lu\n"
-+
-+#: ../lib/interface.c:855
-+#, c-format
-+msgid "             compressed:%lu\n"
-+msgstr "             圧縮:%lu\n"
-+
-+#: ../lib/interface.c:895
-+#, c-format
-+msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+msgstr "TXパケット:%llu エラー:%lu �失:%lu オー�ラン:%lu キャリア:%lu\n"
-+
-+#: ../lib/interface.c:899
-+#, c-format
-+msgid "          collisions:%lu "
-+msgstr "      ��(Collisions):%lu "
-+
-+#: ../lib/interface.c:901
-+#, c-format
-+msgid "compressed:%lu "
-+msgstr "圧縮:%lu "
-+
-+#: ../lib/interface.c:903
-+#, c-format
-+msgid "txqueuelen:%d "
-+msgstr "TXキュー長:%d "
-+
-+#: ../lib/interface.c:905
-+#, c-format
-+msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+msgstr "RX�イト:%llu (%lu.%lu %s)  TX�イト:%llu (%lu.%lu %s)\n"
-+
-+#: ../lib/interface.c:916
-+#, c-format
-+msgid "Interrupt:%d "
-+msgstr "割り込�:%d "
-+
-+#. Only print devices using it for
-+#. I/O maps
-+#: ../lib/interface.c:919
-+#, c-format
-+msgid "Base address:0x%x "
-+msgstr "ベースアドレス:0x%x "
-+
-+#: ../lib/interface.c:921
-+#, c-format
-+msgid "Memory:%lx-%lx "
-+msgstr "メモリ:%lx-%lx "
-+
-+#: ../lib/interface.c:924
-+#, c-format
-+msgid "DMA chan:%x "
-+msgstr "DMA�ェイン:%x "
-+
-+#: ../lib/sockets.c:63
-+#, c-format
-+msgid "No usable address families found.\n"
-+msgstr "利用�能�アドレスファミリ�見��り��ん.\n"
-+
-+#: ../lib/util-ank.c:229
-+#, c-format
-+msgid "ip: %s is invalid inet address\n"
-+msgstr "ip: %s���切�Inetアドレス��.\n"
-+
-+#: ../lib/util-ank.c:238
-+#, c-format
-+msgid "ip: %s is invalid inet prefix\n"
-+msgstr "ip: %s���切�Inetプレフィックス��\n"
-+
-+#: ../lib/util-ank.c:248
-+#, c-format
-+msgid "ip: %s is invalid IPv4 address\n"
-+msgstr "ip: %s���切�IPv4アドレス��.\n"
-+
-+#: ../lib/util-ank.c:256
-+#, c-format
-+msgid "ip: argument is wrong: %s\n"
-+msgstr "ip: 引数�間������: %s\n"
-+
-+#: ../ipmaddr.c:61
-+#, c-format
-+msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+msgstr "使用法: ipmaddr [ add | del ] マル�キャストアドレス dev 文字列\n"
-+
-+#: ../ipmaddr.c:62
-+#, c-format
-+msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+msgstr "        ipmaddr show [ dev 文字列 ] [ ipv4 | ipv6 | link | all ]\n"
-+
-+#: ../ipmaddr.c:63
-+#, c-format
-+msgid "       ipmaddr -V | -version\n"
-+msgstr "       ipmaddr -V | -version\n"
-+
-+#: ../ipmaddr.c:263
-+#, c-format
-+msgid "family %d "
-+msgstr "ファミリ %d "
-+
-+#: ../ipmaddr.c:272
-+#, c-format
-+msgid " users %d"
-+msgstr " ユーザ %d"
-+
-+#: ../ipmaddr.c:358
-+msgid "Cannot create socket"
-+msgstr "ソケットを作�����ん"
-+
-+#: ../slattach.c:180
-+#, c-format
-+msgid "slattach: /dev/%s already locked!\n"
-+msgstr "slattach: /dev/%s ����ロック�れ����!\n"
-+
-+#: ../slattach.c:186
-+#, c-format
-+msgid "slattach: tty_lock: (%s): %s\n"
-+msgstr "slattach: tty_lock: (%s): %s\n"
-+
-+#: ../slattach.c:192
-+#, c-format
-+msgid "slattach: cannot write PID file\n"
-+msgstr "slattach: PIDファイルを書�込���ん\n"
-+
-+#: ../slattach.c:202
-+#, c-format
-+msgid "slattach: tty_lock: UUCP user %s unknown!\n"
-+msgstr "slattach: tty_lock: UUCPユーザ%s��明��!\n"
-+
-+#: ../slattach.c:430
-+#, c-format
-+msgid "slattach: tty_hangup(DROP): %s\n"
-+msgstr "slattach: tty_hangup(DROP): %s\n"
-+
-+#: ../slattach.c:437
-+#, c-format
-+msgid "slattach: tty_hangup(RAISE): %s\n"
-+msgstr "slattach: tty_hangup(RAISE): %s\n"
-+
-+#: ../slattach.c:468
-+#, c-format
-+msgid "slattach: tty name too long\n"
-+msgstr "slattach: tty��長����\n"
-+
-+#: ../slattach.c:498
-+#, c-format
-+msgid "slattach: tty_open: cannot get current state!\n"
-+msgstr "slattach: tty_open: �在�状態を得られ��ん!\n"
-+
-+#: ../slattach.c:505
-+#, c-format
-+msgid "slattach: tty_open: cannot get current line disc!\n"
-+msgstr "slattach: tty_open: �在�ライン・ディスクを得られ��ん!\n"
-+
-+#: ../slattach.c:513
-+#, c-format
-+msgid "slattach: tty_open: cannot set RAW mode!\n"
-+msgstr "slattach: tty_open: RAWモードを設定����ん!\n"
-+
-+#: ../slattach.c:520
-+#, c-format
-+msgid "slattach: tty_open: cannot set %s bps!\n"
-+msgstr "slattach: tty_open: %s bpsを設定����ん!\n"
-+
-+#: ../slattach.c:530
-+#, c-format
-+msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+msgstr "slattach: tty_open: 8N1モード�設定����ん!\n"
-+
-+#: ../slattach.c:672
-+#, c-format
-+msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+msgstr "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-+
-+#: ../slattach.c:704
-+#, c-format
-+msgid "%s started"
-+msgstr "%sを開始����"
-+
-+#: ../slattach.c:705
-+#, c-format
-+msgid " on %s"
-+msgstr "(%s上)"
-+
-+#: ../slattach.c:706
-+#, c-format
-+msgid " interface %s\n"
-+msgstr " インタフェース %s\n"
---- net-tools-1.60.orig/ipmaddr.c
-+++ net-tools-1.60/ipmaddr.c
-@@ -291,13 +291,15 @@
- static int multiaddr_list(int argc, char **argv)
- {
- 	struct ma_info *list = NULL;
-+	size_t l;
- 
- 	while (argc > 0) {
- 		if (strcmp(*argv, "dev") == 0) {
- 			NEXT_ARG();
--			if (filter_dev[0])
-+			l = strlen(*argv);
-+			if (l <= 0 || l >= sizeof(filter_dev))
- 				usage();
--			strcpy(filter_dev, *argv);
-+			strncpy(filter_dev, *argv, sizeof (filter_dev));
- 		} else if (strcmp(*argv, "all") == 0) {
- 			filter_family = AF_UNSPEC;
- 		} else if (strcmp(*argv, "ipv4") == 0) {
-@@ -307,9 +309,10 @@
- 		} else if (strcmp(*argv, "link") == 0) {
- 			filter_family = AF_PACKET;
- 		} else {
--			if (filter_dev[0])
-+			l = strlen(*argv);
-+			if (l <= 0 || l >= sizeof(filter_dev))
- 				usage();
--			strcpy(filter_dev, *argv);
-+			strncpy(filter_dev, *argv, sizeof (filter_dev));
- 		}
- 		argv++; argc--;
- 	}
---- net-tools-1.60.orig/Makefile
-+++ net-tools-1.60/Makefile
-@@ -76,7 +76,7 @@
- NET_LIB_PATH = lib
- NET_LIB_NAME = net-tools
- 
--PROGS	:= ifconfig hostname arp netstat route rarp slattach plipconfig nameif
-+PROGS	:= ifconfig arp netstat route rarp slattach plipconfig nameif # hostname
- 
- -include config.make
- ifeq ($(HAVE_IP_TOOLS),1)
-@@ -88,7 +88,7 @@
- 
- # Compiler and Linker Options
- # You may need to uncomment and edit these if you are using libc5 and IPv6.
--COPTS = -D_GNU_SOURCE -O2 -Wall -g # -I/usr/inet6/include
-+COPTS = -D_GNU_SOURCE -O2 -Wall # -g -I/usr/inet6/include
- ifeq ($(origin LOPTS), undefined)
- LOPTS = 
- endif
-@@ -116,6 +116,18 @@
- CFLAGS	= $(COPTS) -I. -idirafter ./include/ -I$(NET_LIB_PATH)
- LDFLAGS	= $(LOPTS) -L$(NET_LIB_PATH)
- 
-+INSTALL = install
-+INSTALL_PROGRAM = $(INSTALL) -p    -o root -g root  -m  755
-+          
-+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
-+CFLAGS += -g
-+endif
-+
-+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
-+INSTALL_PROGRAM += -s
-+endif
-+
-+
- SUBDIRS	= man/ $(NET_LIB_PATH)/
- 
- ifeq ($(origin CC), undefined)
-@@ -223,29 +235,29 @@
- installbin:
- 	install -m 0755 -d ${BASEDIR}/sbin
- 	install -m 0755 -d ${BASEDIR}/bin
--	install -m 0755 arp        ${BASEDIR}/sbin
--	install -m 0755 hostname   ${BASEDIR}/bin
--	install -m 0755 ifconfig   ${BASEDIR}/sbin
--	install -m 0755 nameif     ${BASEDIR}/sbin
--	install -m 0755 netstat    ${BASEDIR}/bin
--	install -m 0755 plipconfig $(BASEDIR)/sbin
--	install -m 0755 rarp       ${BASEDIR}/sbin
--	install -m 0755 route      ${BASEDIR}/sbin
--	install -m 0755 slattach   $(BASEDIR)/sbin
-+	$(INSTALL_PROGRAM) arp        ${BASEDIR}/sbin
-+#	$(INSTALL_PROGRAM) hostname   ${BASEDIR}/bin
-+	$(INSTALL_PROGRAM) ifconfig   ${BASEDIR}/sbin
-+	$(INSTALL_PROGRAM) nameif     ${BASEDIR}/sbin
-+	$(INSTALL_PROGRAM) netstat    ${BASEDIR}/bin
-+	$(INSTALL_PROGRAM) plipconfig $(BASEDIR)/sbin
-+	$(INSTALL_PROGRAM) rarp       ${BASEDIR}/sbin
-+	$(INSTALL_PROGRAM) route      ${BASEDIR}/sbin
-+	$(INSTALL_PROGRAM) slattach   $(BASEDIR)/sbin
- ifeq ($(HAVE_IP_TOOLS),1)
--	install -m 0755 ipmaddr    $(BASEDIR)/sbin
--	install -m 0755 iptunnel   $(BASEDIR)/sbin
-+	$(INSTALL_PROGRAM) ipmaddr    $(BASEDIR)/sbin
-+	$(INSTALL_PROGRAM) iptunnel   $(BASEDIR)/sbin
- endif
- ifeq ($(HAVE_MII),1)
--	install -m 0755 mii-tool   $(BASEDIR)/sbin
--endif
--	ln -fs hostname $(BASEDIR)/bin/dnsdomainname
--	ln -fs hostname $(BASEDIR)/bin/ypdomainname
--	ln -fs hostname $(BASEDIR)/bin/nisdomainname
--	ln -fs hostname $(BASEDIR)/bin/domainname
--ifeq ($(HAVE_AFDECnet),1)
--	ln -fs hostname $(BASEDIR)/bin/nodename
-+	$(INSTALL_PROGRAM) mii-tool   $(BASEDIR)/sbin
- endif
-+#	ln -fs hostname $(BASEDIR)/bin/dnsdomainname
-+#	ln -fs hostname $(BASEDIR)/bin/ypdomainname
-+#	ln -fs hostname $(BASEDIR)/bin/nisdomainname
-+#	ln -fs hostname $(BASEDIR)/bin/domainname
-+#ifeq ($(HAVE_AFDECnet),1)
-+#	ln -fs hostname $(BASEDIR)/bin/nodename
-+#endif
- 
- savebin:
- 	@for i in ${BASEDIR}/sbin/arp ${BASEDIR}/sbin/ifconfig \
---- net-tools-1.60.orig/README
-+++ net-tools-1.60/README
-@@ -10,7 +10,7 @@
- subsystem of the Linux kernel.  This includes arp, hostname, ifconfig,
- netstat, rarp and route.  Additionally, this package contains
- utilities relating to particular network hardware types (plipconfig,
--slattach) and advanced aspects of IP configuration (iptunnel,
-+slattach, mii-tool) and advanced aspects of IP configuration (iptunnel,
- ipmaddr).
- 
- Please include the output of "program --version" when reporting bugs.
-@@ -24,10 +24,14 @@
- 
-    INSTALLING		Installation instructions.
- 
--   COPYING		Your free copy of the GNU Public License.
--
-    TODO			Some things that need to be done.
- 
-+The  Homepage (including CVS repository, release downloads and a form to
-+request enhancements) is hosted by BerliOS Developer. Please consider to
-+join the project if you want to contribute:
-+
-+                  http://net-tools.berlios.de/
-+
- 
-                           Notes
-                           -----
---- net-tools-1.60.orig/arp.c
-+++ net-tools-1.60/arp.c
-@@ -8,7 +8,7 @@
-  *              NET-3 Networking Distribution for the LINUX operating
-  *              system.
-  *
-- * Version:     $Id: arp.c,v 1.20 2001/04/08 17:05:05 pb Exp $
-+ * Version:     $Id: arp.c,v 1.25 2005/12/04 02:57:15 ecki Exp $
-  *
-  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-  *
-@@ -100,9 +100,10 @@
- {
-     char host[128];
-     struct arpreq req;
--    struct sockaddr sa;
-+    struct sockaddr_storage ss;
-+    struct sockaddr *sa;
-     int flags = 0;
--    int err;
-+    int deleted = 0;
- 
-     memset((char *) &req, 0, sizeof(req));
- 
-@@ -112,12 +113,13 @@
- 	return (-1);
-     }
-     safe_strncpy(host, *args, (sizeof host));
--    if (ap->input(0, host, &sa) < 0) {
-+    sa = (struct sockaddr *)&ss;
-+    if (ap->input(0, host, sa) < 0) {
- 	ap->herror(host);
- 	return (-1);
-     }
-     /* If a host has more than one address, use the correct one! */
--    memcpy((char *) &req.arp_pa, (char *) &sa, sizeof(struct sockaddr));
-+    memcpy((char *) &req.arp_pa, (char *) sa, sizeof(struct sockaddr));
- 
-     if (hw_set)
- 	req.arp_ha.sa_family = hw->type;
-@@ -148,7 +150,7 @@
- 	    continue;
- 	}
- 	if (!strcmp(*args, "dontpub")) {
--#ifdef HAVE_ATF_DONTPUB
-+#ifdef ATF_DONTPUB
- 	    req.arp_flags |= ATF_DONTPUB;
- #else
- 	    ENOSUPP("arp", "ATF_DONTPUB");
-@@ -157,7 +159,7 @@
- 	    continue;
- 	}
- 	if (!strcmp(*args, "auto")) {
--#ifdef HAVE_ATF_MAGIC
-+#ifdef ATF_MAGIC
- 	    req.arp_flags |= ATF_MAGIC;
- #else
- 	    ENOSUPP("arp", "ATF_MAGIC");
-@@ -177,11 +179,11 @@
- 		usage();
- 	    if (strcmp(*args, "255.255.255.255") != 0) {
- 		strcpy(host, *args);
--		if (ap->input(0, host, &sa) < 0) {
-+		if (ap->input(0, host, sa) < 0) {
- 		    ap->herror(host);
- 		    return (-1);
- 		}
--		memcpy((char *) &req.arp_netmask, (char *) &sa,
-+		memcpy((char *) &req.arp_netmask, (char *) sa,
- 		       sizeof(struct sockaddr));
- 		req.arp_flags |= ATF_NETMASK;
- 	    }
-@@ -190,35 +192,41 @@
- 	}
- 	usage();
-     }
-+
-+    // if neighter priv nor pub is given, work on both
-     if (flags == 0)
- 	flags = 3;
- 
-     strcpy(req.arp_dev, device);
- 
--    err = -1;
-+    /* unfortuatelly the kernel interface does not allow us to
-+       delete private entries anlone, so we need this hack
-+       to avoid "not found" errors if we try both. */
-+    deleted = 0;
- 
-     /* Call the kernel. */
-     if (flags & 2) {
- 	if (opt_v)
--	    fprintf(stderr, "arp: SIOCDARP(nopub)\n");
--	if ((err = ioctl(sockfd, SIOCDARP, &req) < 0)) {
--	    if (errno == ENXIO) {
-+	    fprintf(stderr, "arp: SIOCDARP(dontpub)\n");
-+	if (ioctl(sockfd, SIOCDARP, &req) < 0) {
-+	    if ((errno == ENXIO) || (errno == ENOENT)) {
- 		if (flags & 1)
--		    goto nopub;
-+		    goto dontpub;
- 		printf(_("No ARP entry for %s\n"), host);
- 		return (-1);
- 	    }
--	    perror("SIOCDARP(priv)");
-+	    perror("SIOCDARP(dontpub)");
- 	    return (-1);
--	}
-+	} else
-+	  deleted = 1;
-     }
--    if ((flags & 1) && (err)) {
--      nopub:
-+    if (!deleted && (flags & 1)) {
-+      dontpub:
- 	req.arp_flags |= ATF_PUBL;
- 	if (opt_v)
- 	    fprintf(stderr, "arp: SIOCDARP(pub)\n");
- 	if (ioctl(sockfd, SIOCDARP, &req) < 0) {
--	    if (errno == ENXIO) {
-+	    if ((errno == ENXIO) || (errno == ENOENT)) {
- 		printf(_("No ARP entry for %s\n"), host);
- 		return (-1);
- 	    }
-@@ -260,7 +268,8 @@
- {
-     char host[128];
-     struct arpreq req;
--    struct sockaddr sa;
-+    struct sockaddr_storage ss;
-+    struct sockaddr *sa;
-     int flags;
- 
-     memset((char *) &req, 0, sizeof(req));
-@@ -271,12 +280,13 @@
- 	return (-1);
-     }
-     safe_strncpy(host, *args++, (sizeof host));
--    if (ap->input(0, host, &sa) < 0) {
-+    sa = (struct sockaddr *)&ss;
-+    if (ap->input(0, host, sa) < 0) {
- 	ap->herror(host);
- 	return (-1);
-     }
-     /* If a host has more than one address, use the correct one! */
--    memcpy((char *) &req.arp_pa, (char *) &sa, sizeof(struct sockaddr));
-+    memcpy((char *) &req.arp_pa, (char *) sa, sizeof(struct sockaddr));
- 
-     /* Fetch the hardware address. */
-     if (*args == NULL) {
-@@ -317,7 +327,7 @@
- 	    continue;
- 	}
- 	if (!strcmp(*args, "dontpub")) {
--#ifdef HAVE_ATF_DONTPUB
-+#ifdef ATF_DONTPUB
- 	    flags |= ATF_DONTPUB;
- #else
- 	    ENOSUPP("arp", "ATF_DONTPUB");
-@@ -326,7 +336,7 @@
- 	    continue;
- 	}
- 	if (!strcmp(*args, "auto")) {
--#ifdef HAVE_ATF_MAGIC
-+#ifdef ATF_MAGIC
- 	    flags |= ATF_MAGIC;
- #else
- 	    ENOSUPP("arp", "ATF_MAGIC");
-@@ -346,11 +356,11 @@
- 		usage();
- 	    if (strcmp(*args, "255.255.255.255") != 0) {
- 		strcpy(host, *args);
--		if (ap->input(0, host, &sa) < 0) {
-+		if (ap->input(0, host, sa) < 0) {
- 		    ap->herror(host);
- 		    return (-1);
- 		}
--		memcpy((char *) &req.arp_netmask, (char *) &sa,
-+		memcpy((char *) &req.arp_netmask, (char *) sa,
- 		       sizeof(struct sockaddr));
- 		flags |= ATF_NETMASK;
- 	    }
-@@ -445,11 +455,11 @@
- 	strcat(flags, "M");
-     if (arp_flags & ATF_PUBL)
- 	strcat(flags, "P");
--#ifdef HAVE_ATF_MAGIC
-+#ifdef ATF_MAGIC
-     if (arp_flags & ATF_MAGIC)
- 	strcat(flags, "A");
- #endif
--#ifdef HAVE_ATF_DONTPUB
-+#ifdef ATF_DONTPUB
-     if (arp_flags & ATF_DONTPUB)
- 	strcat(flags, "!");
- #endif
-@@ -463,7 +473,7 @@
- 
-     if (!(arp_flags & ATF_COM)) {
- 	if (arp_flags & ATF_PUBL)
--	    printf("%-8.8s%-20.20s", "*", "*");
-+	    printf("%-8.8s%-20.20s", "*", _("<from_interface>"));
- 	else
- 	    printf("%-8.8s%-20.20s", "", _("(incomplete)"));
-     } else {
-@@ -486,7 +496,7 @@
- 
-     if (!(arp_flags & ATF_COM)) {
- 	if (arp_flags & ATF_PUBL)
--	    printf("* ");
-+	    printf("<from_interface> ");
- 	else
- 	    printf(_("<incomplete> "));
-     } else {
-@@ -499,12 +509,12 @@
-     if (arp_flags & ATF_PERM)
- 	printf("PERM ");
-     if (arp_flags & ATF_PUBL)
--	printf("PUP ");
--#ifdef HAVE_ATF_MAGIC
-+	printf("PUB ");
-+#ifdef ATF_MAGIC
-     if (arp_flags & ATF_MAGIC)
- 	printf("AUTO ");
- #endif
--#ifdef HAVE_ATF_DONTPUB
-+#ifdef ATF_DONTPUB
-     if (arp_flags & ATF_DONTPUB)
- 	printf("DONTPUB ");
- #endif
-@@ -519,7 +529,8 @@
- static int arp_show(char *name)
- {
-     char host[100];
--    struct sockaddr sa;
-+    struct sockaddr_storage ss;
-+    struct sockaddr *sa;
-     char ip[100];
-     char hwa[100];
-     char mask[100];
-@@ -532,14 +543,15 @@
- 
-     host[0] = '\0';
- 
-+    sa = (struct sockaddr *)&ss;
-     if (name != NULL) {
- 	/* Resolve the host name. */
- 	safe_strncpy(host, name, (sizeof host));
--	if (ap->input(0, host, &sa) < 0) {
-+	if (ap->input(0, host, sa) < 0) {
- 	    ap->herror(host);
- 	    return (-1);
- 	}
--	safe_strncpy(host, ap->sprint(&sa, 1), sizeof(host));
-+	safe_strncpy(host, ap->sprint(sa, 1), sizeof(host));
-     }
-     /* Open the PROCps kernel table. */
-     if ((fp = fopen(_PATH_PROCNET_ARP, "r")) == NULL) {
-@@ -575,10 +587,10 @@
- 	    if (opt_n)
- 		hostname = "?";
- 	    else {
--		if (ap->input(0, ip, &sa) < 0)
-+		if (ap->input(0, ip, sa) < 0)
- 		    hostname = ip;
- 		else
--		    hostname = ap->sprint(&sa, opt_n | 0x8000);
-+		    hostname = ap->sprint(sa, opt_n | 0x8000);
- 		if (strcmp(hostname, ip) == 0)
- 		    hostname = "?";
- 	    }
-@@ -612,11 +624,10 @@
- static void usage(void)
- {
-     fprintf(stderr, _("Usage:\n  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP cache\n"));
--    fprintf(stderr, _("  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP entry\n"));
--    fprintf(stderr, _("  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from file\n"));
--    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add entry\n"));
--    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  <-''-\n"));
--    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      <-''-\n\n"));
-+    fprintf(stderr, _("  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP entry\n"));
-+    fprintf(stderr, _("  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from file\n"));
-+    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add entry\n"));
-+    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          <-''-\n\n"));
-     
-     fprintf(stderr, _("        -a                       display (all) hosts in alternative (BSD) style\n"));
-     fprintf(stderr, _("        -s, --set                set a new ARP entry\n"));
---- net-tools-1.60.orig/config.in
-+++ net-tools-1.60/config.in
-@@ -49,16 +49,16 @@
- * 
- bool 'UNIX protocol family' HAVE_AFUNIX y
- bool 'INET (TCP/IP) protocol family' HAVE_AFINET y
--bool 'INET6 (IPv6) protocol family' HAVE_AFINET6 n
-+bool 'INET6 (IPv6) protocol family' HAVE_AFINET6 y
- bool 'Novell IPX/SPX protocol family' HAVE_AFIPX y
- bool 'Appletalk DDP protocol family' HAVE_AFATALK y
- bool 'AX25 (packet radio) protocol family' HAVE_AFAX25 y
- bool 'NET/ROM (packet radio) protocol family' HAVE_AFNETROM y
--bool 'Rose (packet radio) protocol family' HAVE_AFROSE n
-+bool 'Rose (packet radio) protocol family' HAVE_AFROSE y
- bool 'X.25 (CCITT) protocol family' HAVE_AFX25 y
--bool 'Econet protocol family' HAVE_AFECONET n
-+bool 'Econet protocol family' HAVE_AFECONET y
- bool 'DECnet protocol family' HAVE_AFDECnet n
--bool 'Ash protocol family' HAVE_AFASH n
-+bool 'Ash protocol family' HAVE_AFASH y
- *
- *
- *            Device Hardware types.
-@@ -71,21 +71,23 @@
- bool 'STRIP (Metricom radio) support' HAVE_HWSTRIP y
- bool 'Token ring (generic) support' HAVE_HWTR y
- bool 'AX25 (packet radio) support' HAVE_HWAX25 y
--bool 'Rose (packet radio) support' HAVE_HWROSE n
-+bool 'Rose (packet radio) support' HAVE_HWROSE y
- bool 'NET/ROM (packet radio) support' HAVE_HWNETROM y
- bool 'X.25 (generic) support' HAVE_HWX25 y
- bool 'DLCI/FRAD (frame relay) support' HAVE_HWFR y
--bool 'SIT (IPv6-in-IPv4) support' HAVE_HWSIT n
--bool 'FDDI (generic) support' HAVE_HWFDDI n
--bool 'HIPPI (generic) support' HAVE_HWHIPPI n
--bool 'Ash hardware support' HAVE_HWASH n
--bool '(Cisco)-HDLC/LAPB support' HAVE_HWHDLCLAPB n
-+bool 'SIT (IPv6-in-IPv4) support' HAVE_HWSIT y
-+bool 'FDDI (generic) support' HAVE_HWFDDI y
-+bool 'HIPPI (generic) support' HAVE_HWHIPPI y
-+bool 'Ash hardware support' HAVE_HWASH y
-+bool '(Cisco)-HDLC/LAPB support' HAVE_HWHDLCLAPB y
- bool 'IrDA support' HAVE_HWIRDA y
--bool 'Econet hardware support' HAVE_HWEC n
-+bool 'Econet hardware support' HAVE_HWEC y
-+bool 'Generic EUI-64 hardware support' HAVE_HWEUI64 y
-+
- *
- *
- *           Other Features.
- *
--bool 'IP Masquerading support' HAVE_FW_MASQUERADE n
--bool 'Build iptunnel and ipmaddr' HAVE_IP_TOOLS n
--bool 'Build mii-tool' HAVE_MII n
-+bool 'IP Masquerading support' HAVE_FW_MASQUERADE y
-+bool 'Build iptunnel and ipmaddr' HAVE_IP_TOOLS y
-+bool 'Build mii-tool' HAVE_MII y
---- net-tools-1.60.orig/hostname.c
-+++ net-tools-1.60/hostname.c
-@@ -9,20 +9,19 @@
-  *              dnsdmoainname   
-  *              nisdomainname {name|-F file}
-  *
-- * Version:     hostname 1.96 (1996-02-18)
-+ * Version:     hostname 1.101 (2003-10-11)
-  *
-  * Author:      Peter Tobias <tobias@et-inf.fho-emden.de>
-  *
-  * Changes:
-- *      {1.90}  Peter Tobias :          Added -a and -i options.
-- *      {1.91}  Bernd Eckenfels :       -v,-V rewritten, long_opts 
-- *                                      (major rewrite), usage.
-- *960120 {1.95} Bernd Eckenfels :       -y/nisdomainname - support for get/
-- *                                      setdomainname added 
-- *960218 {1.96} Bernd Eckenfels :       netinet/in.h added
-- *980629 {1.97} Arnaldo Carvalho de Melo : gettext instead of catgets for i18n
-- *20000213 {1.99} Arnaldo Carvalho de Melo : fixed some i18n strings
-+ *         {1.90}  Peter Tobias : Added -a and -i options.
-+ *         {1.91}  Bernd Eckenfels : -v,-V rewritten, long_opts (major rewrite), usage.
-+ *19960120 {1.95}  Bernd Eckenfels : -y/nisdomainname - support for get/setdomainname added 
-+ *19960218 {1.96}  Bernd Eckenfels : netinet/in.h added
-+ *19980629 {1.97}  Arnaldo Carvalho de Melo : gettext instead of catgets for i18n
-+ *20000213 {1.99}  Arnaldo Carvalho de Melo : fixed some i18n strings
-  *20010404 {1.100} Arnaldo Carvalho de Melo: use setlocale
-+ *20031011 {1.101} Maik Broemme: gcc 3.x fixes (default: break)
-  *
-  *              This program is free software; you can redistribute it
-  *              and/or  modify it under  the terms of  the GNU General
-@@ -31,7 +30,9 @@
-  *              your option) any later version.
-  */
- #include <stdio.h>
-+#include <stdlib.h>
- #include <unistd.h>
-+#include <stdlib.h>
- #include <getopt.h>
- #include <string.h>
- #include <netdb.h>
-@@ -78,6 +79,7 @@
-             fprintf(stderr, _("%s: name too long\n"), program_name);
-             break;
-         default:
-+	    break;
-         }
- 	exit(1);
-     }
-@@ -97,7 +99,6 @@
- 	case EINVAL:
- 	    fprintf(stderr, _("%s: name too long\n"), program_name);
- 	    break;
--	default:
- 	}
- 	exit(1);
-     };
-@@ -116,7 +117,6 @@
- 	case EINVAL:
- 	    fprintf(stderr, _("%s: name too long\n"), program_name);
- 	    break;
--	default:
- 	}
- 	exit(1);
-     };
-@@ -173,7 +173,6 @@
- 	    *p = '\0';
- 	printf("%s\n", hp->h_name);
- 	break;
--    default:
-     }
- }
- 
-@@ -326,11 +325,12 @@
- 	    break;
- 	case 'V':
- 	    version();
-+	    break; // not reached
- 	case '?':
- 	case 'h':
- 	default:
- 	    usage();
--
-+	    break; // not reached
- 	};
- 
- 
---- net-tools-1.60.orig/ifconfig.c
-+++ net-tools-1.60/ifconfig.c
-@@ -3,7 +3,7 @@
-  *              that either displays or sets the characteristics of
-  *              one or more of the system's networking interfaces.
-  *
-- * Version:     $Id: ifconfig.c,v 1.50 2001/04/13 18:25:18 pb Exp $
-+ * Version:     $Id: ifconfig.c,v 1.57 2002/12/10 00:56:41 ecki Exp $
-  *
-  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-  *              and others.  Copyright 1993 MicroWalt Corporation
-@@ -88,7 +88,6 @@
- char *Release = RELEASE, *Version = "ifconfig 1.42 (2001-04-13)";
- 
- int opt_a = 0;			/* show all interfaces          */
--int opt_i = 0;			/* show the statistics          */
- int opt_v = 0;			/* debugging output flag        */
- 
- int addr_family = 0;		/* currently selected AF        */
-@@ -105,7 +104,7 @@
-     int res;
- 
-     if (ife_short)
--	printf(_("Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-+	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
- 
-     if (!ifname) {
- 	res = for_all_interfaces(do_if_print, &opt_a);
-@@ -127,7 +126,7 @@
- 
-     safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-     if (ioctl(skfd, SIOCGIFFLAGS, &ifr) < 0) {
--	fprintf(stderr, _("%s: unknown interface: %s\n"), 
-+	fprintf(stderr, _("%s: ERROR while getting interface flags: %s\n"), 
- 		ifname,	strerror(errno));
- 	return (-1);
-     }
-@@ -159,7 +158,7 @@
- 
-     safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-     if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
--	fprintf(stderr, _("%s: unknown interface: %s\n"), 
-+	fprintf(stderr, _("%s: ERROR while getting interface flags: %s\n"), 
- 		ifname, strerror(errno));
- 	return -1;
-     }
-@@ -172,9 +171,35 @@
-     return (0);
- }
- 
-+/** test is a specified flag is set */
-+static int test_flag(char *ifname, short flags)
-+{
-+    struct ifreq ifr;
-+    int fd;
-+
-+    if (strchr(ifname, ':')) {
-+        /* This is a v4 alias interface.  Downing it via a socket for
-+	   another AF may have bad consequences. */
-+        fd = get_socket_for_af(AF_INET);
-+	if (fd < 0) {
-+	    fprintf(stderr, _("No support for INET on this system.\n"));
-+	    return -1;
-+	}
-+    } else
-+        fd = skfd;
-+
-+    safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-+    if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-+	fprintf(stderr, _("%s: ERROR while testing interface flags: %s\n"), 
-+		ifname, strerror(errno));
-+	return -1;
-+    }
-+    return (ifr.ifr_flags & flags);
-+}
-+
- static void usage(void)
- {
--    fprintf(stderr, _("Usage:\n  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"));
-+    fprintf(stderr, _("Usage:\n  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"));
- #if HAVE_AFINET
-     fprintf(stderr, _("  [add <address>[/<prefixlen>]]\n"));
-     fprintf(stderr, _("  [del <address>[/<prefixlen>]]\n"));
-@@ -208,7 +233,7 @@
- static void version(void)
- {
-     fprintf(stderr, "%s\n%s\n", Release, Version);
--    exit(0);
-+    exit(E_USAGE);
- }
- 
- static int set_netmask(int skfd, struct ifreq *ifr, struct sockaddr *sa)
-@@ -222,18 +247,19 @@
- 		strerror(errno));
- 	err = 1;
-     }
--    return 0;
-+    return err;
- }
- 
- int main(int argc, char **argv)
- {
-     struct sockaddr sa;
-+    struct sockaddr samask;
-     struct sockaddr_in sin;
-     char host[128];
-     struct aftype *ap;
-     struct hwtype *hw;
-     struct ifreq ifr;
--    int goterr = 0, didnetmask = 0;
-+    int goterr = 0, didnetmask = 0, neednetmask=0;
-     char **spp;
-     int fd;
- #if HAVE_AFINET6
-@@ -388,6 +414,8 @@
- 	}
- 	if (!strcmp(*spp, "-promisc")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_PROMISC);
-+	    if (test_flag(ifr.ifr_name, IFF_PROMISC) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in promisc mode... maybe other application is running?\n"), ifr.ifr_name);
- 	    spp++;
- 	    continue;
- 	}
-@@ -398,6 +426,8 @@
- 	}
- 	if (!strcmp(*spp, "-multicast")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_MULTICAST);
-+	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in MULTICAST mode.\n"), ifr.ifr_name);
- 	    spp++;
- 	    continue;
- 	}
-@@ -408,6 +438,8 @@
- 	}
- 	if (!strcmp(*spp, "-allmulti")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_ALLMULTI);
-+	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in ALLMULTI mode.\n"), ifr.ifr_name);
- 	    spp++;
- 	    continue;
- 	}
-@@ -430,6 +462,8 @@
- 	if (!strcmp(*spp, "-dynamic")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_DYNAMIC);
- 	    spp++;
-+	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in DYNAMIC mode.\n"), ifr.ifr_name);
- 	    continue;
- 	}
- #endif
-@@ -486,6 +520,8 @@
- 
- 	if (!strcmp(*spp, "-broadcast")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_BROADCAST);
-+	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in BROADCAST mode.\n"), ifr.ifr_name);
- 	    spp++;
- 	    continue;
- 	}
-@@ -493,7 +529,10 @@
- 	    if (*++spp != NULL) {
- 		safe_strncpy(host, *spp, (sizeof host));
- 		if (ap->input(0, host, &sa) < 0) {
--		    ap->herror(host);
-+		    if (ap->herror)
-+		    	ap->herror(host);
-+		    else
-+		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for broadcast\n"), host);
- 		    goterr = 1;
- 		    spp++;
- 		    continue;
-@@ -515,7 +554,10 @@
- 		usage();
- 	    safe_strncpy(host, *spp, (sizeof host));
- 	    if (ap->input(0, host, &sa) < 0) {
--		ap->herror(host);
-+		    if (ap->herror)
-+		    	ap->herror(host);
-+		    else
-+		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for dstaddr\n"), host);
- 		goterr = 1;
- 		spp++;
- 		continue;
-@@ -535,13 +577,16 @@
- 		usage();
- 	    safe_strncpy(host, *spp, (sizeof host));
- 	    if (ap->input(0, host, &sa) < 0) {
--		ap->herror(host);
-+		    if (ap->herror)
-+		    	ap->herror(host);
-+		    else
-+		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for netmask\n"), host);
- 		goterr = 1;
- 		spp++;
- 		continue;
- 	    }
- 	    didnetmask++;
--	    goterr = set_netmask(ap->fd, &ifr, &sa);
-+	    goterr |= set_netmask(ap->fd, &ifr, &sa);
- 	    spp++;
- 	    continue;
- 	}
-@@ -613,6 +658,8 @@
- 	if (!strcmp(*spp, "-pointopoint")) {
- 	    goterr |= clr_flag(ifr.ifr_name, IFF_POINTOPOINT);
- 	    spp++;
-+	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-+	    	fprintf(stderr, _("Warning: Interface %s still in POINTOPOINT mode.\n"), ifr.ifr_name);
- 	    continue;
- 	}
- 	if (!strcmp(*spp, "pointopoint")) {
-@@ -620,7 +667,10 @@
- 		spp++;
- 		safe_strncpy(host, *spp, (sizeof host));
- 		if (ap->input(0, host, &sa)) {
--		    ap->herror(host);
-+		    if (ap->herror)
-+		    	ap->herror(host);
-+		    else
-+		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for pointopoint\n"), host);
- 		    goterr = 1;
- 		    spp++;
- 		    continue;
-@@ -661,8 +711,12 @@
- 	    memcpy((char *) &ifr.ifr_hwaddr, (char *) &sa,
- 		   sizeof(struct sockaddr));
- 	    if (ioctl(skfd, SIOCSIFHWADDR, &ifr) < 0) {
--		fprintf(stderr, "SIOCSIFHWADDR: %s\n",
--			strerror(errno));
-+		if (errno == EBUSY)
-+			fprintf(stderr, "SIOCSIFHWADDR: %s - you may need to down the interface\n",
-+				strerror(errno));
-+		else
-+			fprintf(stderr, "SIOCSIFHWADDR: %s\n",
-+				strerror(errno));
- 		goterr = 1;
- 	    }
- 	    spp++;
-@@ -681,12 +735,15 @@
- 			usage();
- 		    *cp = 0;
- 		} else {
--		    prefix_len = 0;
-+		    prefix_len = 128;
- 		}
- 		safe_strncpy(host, *spp, (sizeof host));
- 		if (inet6_aftype.input(1, host, 
- 				       (struct sockaddr *) &sa6) < 0) {
--		    inet6_aftype.herror(host);
-+		    if (inet6_aftype.herror)
-+		    	inet6_aftype.herror(host);
-+		    else
-+		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for add\n"), host);
- 		    goterr = 1;
- 		    spp++;
- 		    continue;
-@@ -771,7 +828,7 @@
- 			usage();
- 		    *cp = 0;
- 		} else {
--		    prefix_len = 0;
-+		    prefix_len = 128;
- 		}
- 		safe_strncpy(host, *spp, (sizeof host));
- 		if (inet6_aftype.input(1, host, 
-@@ -800,6 +857,8 @@
- 		}
- 		ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- 		ifr6.ifr6_prefixlen = prefix_len;
-+		if (opt_v)
-+			fprintf(stderr, "now deleting: ioctl(SIOCDIFADDR,{ifindex=%d,prefixlen=%ld})\n",ifr.ifr_ifindex,prefix_len);
- 		if (ioctl(fd, SIOCDIFADDR, &ifr6) < 0) {
- 		    fprintf(stderr, "SIOCDIFADDR: %s\n",
- 			    strerror(errno));
-@@ -859,7 +918,7 @@
- 		    usage();
- 		*cp = 0;
- 	    } else {
--		prefix_len = 0;
-+		prefix_len = 128;
- 	    }
- 	    safe_strncpy(host, *spp, (sizeof host));
- 	    if (inet6_aftype.input(1, host, (struct sockaddr *) &sa6) < 0) {
-@@ -903,7 +962,7 @@
- 	/* FIXME: sa is too small for INET6 addresses, inet6 should use that too, 
- 	   broadcast is unexpected */
- 	if (ap->getmask) {
--	    switch (ap->getmask(host, &sa, NULL)) {
-+	    switch (ap->getmask(host, &samask, NULL)) {
- 	    case -1:
- 		usage();
- 		break;
-@@ -911,8 +970,8 @@
- 		if (didnetmask)
- 		    usage();
- 
--		goterr = set_netmask(skfd, &ifr, &sa);
--		didnetmask++;
-+		// remeber to set the netmask from samask later
-+		neednetmask = 1;
- 		break;
- 	    }
- 	}
-@@ -921,9 +980,11 @@
- 	   exit(1);
- 	}
- 	if (ap->input(0, host, &sa) < 0) {
--	    ap->herror(host);
--	    fprintf(stderr, _("ifconfig: `--help' gives usage information.\n"));
--	    exit(1);
-+	    if (ap->herror)
-+	    	ap->herror(host);
-+	    else
-+	    	fprintf(stderr,_("ifconfig: error resolving '%s' to set address for af=%s\n"), host, ap->name); fprintf(stderr,
-+	    _("ifconfig: `--help' gives usage information.\n")); exit(1);
- 	}
- 	memcpy((char *) &ifr.ifr_addr, (char *) &sa, sizeof(struct sockaddr));
- 	{
-@@ -980,6 +1041,14 @@
- 	spp++;
-     }
- 
-+    if (neednetmask) {
-+	goterr |= set_netmask(skfd, &ifr, &samask);
-+	didnetmask++;
-+    }
-+
-+    if (opt_v && goterr)
-+    	fprintf(stderr, _("WARNING: at least one error occured. (%d)\n"), goterr);
-+
-     return (goterr);
- }
- 
---- net-tools-1.60.orig/netstat.c
-+++ net-tools-1.60/netstat.c
-@@ -6,7 +6,7 @@
-  *              NET-3 Networking Distribution for the LINUX operating
-  *              system.
-  *
-- * Version:     $Id: netstat.c,v 1.43 2001/04/15 14:41:17 pb Exp $
-+ * Version:     $Id: netstat.c,v 1.55 2007/12/01 19:00:40 ecki Exp $
-  *
-  * Authors:     Fred Baumgarten, <dc6iq@insu1.etec.uni-karlsruhe.de>
-  *              Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-@@ -94,6 +94,7 @@
- #include "sockets.h"
- #include "interface.h"
- #include "util.h"
-+#include "proc.h"
- 
- #define PROGNAME_WIDTH 20
- 
-@@ -153,7 +154,7 @@
- FILE *procinfo;
- 
- #define INFO_GUTS1(file,name,proc)			\
--  procinfo = fopen((file), "r");			\
-+  procinfo = proc_fopen((file));			\
-   if (procinfo == NULL) {				\
-     if (errno != ENOENT) {				\
-       perror((file));					\
-@@ -174,7 +175,7 @@
- #if HAVE_AFINET6
- #define INFO_GUTS2(file,proc)				\
-   lnr = 0;						\
--  procinfo = fopen((file), "r");		       	\
-+  procinfo = proc_fopen((file));		       	\
-   if (procinfo != NULL) {				\
-     do {						\
-       if (fgets(buffer, sizeof(buffer), procinfo))	\
-@@ -216,7 +217,7 @@
- 
- static struct prg_node {
-     struct prg_node *next;
--    int inode;
-+    unsigned long inode;
-     char name[PROGNAME_WIDTH];
- } *prg_hash[PRG_HASH_SIZE];
- 
-@@ -249,7 +250,7 @@
- /* NOT working as of glibc-2.0.7: */
- #undef  DIRENT_HAVE_D_TYPE_WORKS
- 
--static void prg_cache_add(int inode, char *name)
-+static void prg_cache_add(unsigned long inode, char *name)
- {
-     unsigned hi = PRG_HASHIT(inode);
-     struct prg_node **pnp,*pn;
-@@ -272,7 +273,7 @@
-     strcpy(pn->name,name);
- }
- 
--static const char *prg_cache_get(int inode)
-+static const char *prg_cache_get(unsigned long inode)
- {
-     unsigned hi=PRG_HASHIT(inode);
-     struct prg_node *pn;
-@@ -295,16 +296,18 @@
-     prg_cache_loaded=0;
- }
- 
--static void extract_type_1_socket_inode(const char lname[], long * inode_p) {
-+static int extract_type_1_socket_inode(const char lname[], unsigned long * inode_p) {
- 
-     /* If lname is of the form "socket:[12345]", extract the "12345"
-        as *inode_p.  Otherwise, return -1 as *inode_p.
-        */
- 
--    if (strlen(lname) < PRG_SOCKET_PFXl+3) *inode_p = -1;
--    else if (memcmp(lname, PRG_SOCKET_PFX, PRG_SOCKET_PFXl)) *inode_p = -1;
--    else if (lname[strlen(lname)-1] != ']') *inode_p = -1;
--    else {
-+    if (strlen(lname) < PRG_SOCKET_PFXl+3) return(-1);
-+    
-+    if (memcmp(lname, PRG_SOCKET_PFX, PRG_SOCKET_PFXl)) return(-1);
-+    if (lname[strlen(lname)-1] != ']') return(-1);
-+
-+    {
-         char inode_str[strlen(lname + 1)];  /* e.g. "12345" */
-         const int inode_str_len = strlen(lname) - PRG_SOCKET_PFXl - 1;
-         char *serr;
-@@ -313,37 +316,41 @@
-         inode_str[inode_str_len] = '\0';
-         *inode_p = strtol(inode_str,&serr,0);
-         if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
--            *inode_p = -1;
-+            return(-1);
-     }
-+    return(0);
- }
- 
- 
- 
--static void extract_type_2_socket_inode(const char lname[], long * inode_p) {
-+static int extract_type_2_socket_inode(const char lname[], unsigned long * inode_p) {
- 
-     /* If lname is of the form "[0000]:12345", extract the "12345"
-        as *inode_p.  Otherwise, return -1 as *inode_p.
-        */
- 
--    if (strlen(lname) < PRG_SOCKET_PFX2l+1) *inode_p = -1;
--    else if (memcmp(lname, PRG_SOCKET_PFX2, PRG_SOCKET_PFX2l)) *inode_p = -1;
--    else {
-+    if (strlen(lname) < PRG_SOCKET_PFX2l+1) return(-1);
-+    if (memcmp(lname, PRG_SOCKET_PFX2, PRG_SOCKET_PFX2l)) return(-1);
-+
-+    {
-         char *serr;
- 
-         *inode_p=strtol(lname + PRG_SOCKET_PFX2l,&serr,0);
-         if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
--            *inode_p = -1;
-+            return(-1);
-     }
-+    return(0);
- }
- 
- 
- 
-+
- static void prg_cache_load(void)
- {
-     char line[LINE_MAX],eacces=0;
-     int procfdlen,fd,cmdllen,lnamelen;
-     char lname[30],cmdlbuf[512],finbuf[PROGNAME_WIDTH];
--    long inode;
-+    unsigned long inode;
-     const char *cs,*cmdlp;
-     DIR *dirproc=NULL,*dirfd=NULL;
-     struct dirent *direproc,*direfd;
-@@ -386,11 +393,9 @@
- 	    lnamelen=readlink(line,lname,sizeof(lname)-1);
-             lname[lnamelen] = '\0';  /*make it a null-terminated string*/
- 
--            extract_type_1_socket_inode(lname, &inode);
--
--            if (inode < 0) extract_type_2_socket_inode(lname, &inode);
--
--            if (inode < 0) continue;
-+            if (extract_type_1_socket_inode(lname, &inode) < 0)
-+              if (extract_type_2_socket_inode(lname, &inode) < 0)
-+                continue;
- 
- 	    if (!cmdlp) {
- 		if (procfdlen - PATH_FD_SUFFl + PATH_CMDLINEl >= 
-@@ -450,7 +455,7 @@
-     char buffer[256], dev[16];
-     int st, vs, vr, sendq, recvq, ret;
- 
--    f = fopen(_PATH_PROCNET_NR, "r");
-+    f = proc_fopen(_PATH_PROCNET_NR);
-     if (f == NULL) {
- 	if (errno != ENOENT) {
- 	    perror(_PATH_PROCNET_NR);
-@@ -527,15 +532,15 @@
- 
-     if (flag_exp > 1) {
- 	if (!(flag_not & FLAG_NUM_USER) && ((pw = getpwuid(uid)) != NULL))
--	    printf("%-10s ", pw->pw_name);
-+	    printf(" %-10s ", pw->pw_name);
- 	else
--	    printf("%-10d ", uid);
--	printf("%-10ld ",inode);
-+	    printf(" %-10d ", uid);
-+	printf("%-10lu ",inode);
-     }
-     if (flag_prg)
--	printf("%-" PROGNAME_WIDTHs "s",prg_cache_get(inode));
-+	printf(" %-16s",prg_cache_get(inode));
-     if (flag_opt)
--	printf("%s", timers);
-+	printf(" %s", timers);
-     putchar('\n');
- }
- 
-@@ -646,7 +651,7 @@
- #if HAVE_AFX25
- static int x25_info(void)
- {
--       FILE *f=fopen(_PATH_PROCNET_X25, "r");
-+       FILE *f=proc_fopen(_PATH_PROCNET_X25);
-        char buffer[256],dev[16];
-        int st,vs,vr,sendq,recvq,lci;
-        static char *x25_state[5]=
-@@ -657,7 +662,7 @@
-                "ESTABLISHED",
-                "RECOVERY"
-        };
--       if(!(f=fopen(_PATH_PROCNET_X25, "r")))
-+       if(!(f=proc_fopen(_PATH_PROCNET_X25)))
-        {
-                if (errno != ENOENT) {
-                        perror(_PATH_PROCNET_X25);
-@@ -705,6 +710,7 @@
-     unsigned long rxq, txq, time_len, retr, inode;
-     int num, local_port, rem_port, d, state, uid, timer_run, timeout;
-     char rem_addr[128], local_addr[128], timers[64], buffer[1024], more[512];
-+    char *protname;
-     struct aftype *ap;
- #if HAVE_AFINET6
-     struct sockaddr_in6 localaddr, remaddr;
-@@ -719,12 +725,13 @@
- 	return;
- 
-     num = sscanf(line,
--    "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-+    "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
- 		 &d, local_addr, &local_port, rem_addr, &rem_port, &state,
- 		 &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
- 
-     if (strlen(local_addr) > 8) {
- #if HAVE_AFINET6
-+	protname = "tcp6";
- 	/* Demangle what the kernel gives us */
- 	sscanf(local_addr, "%08X%08X%08X%08X",
- 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
-@@ -740,6 +747,7 @@
- 	remaddr.sin6_family = AF_INET6;
- #endif
-     } else {
-+	protname = "tcp";
- 	sscanf(local_addr, "%X",
- 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
- 	sscanf(rem_addr, "%X",
-@@ -813,8 +821,8 @@
- 			 timer_run, (double) time_len / HZ, retr, timeout);
- 		break;
- 	    }
--	printf("tcp   %6ld %6ld %-23s %-23s %-12s",
--	       rxq, txq, local_addr, rem_addr, _(tcp_state[state]));
-+	printf("%-4s  %6ld %6ld %-*s %-*s %-11s",
-+	       protname, rxq, txq, netmax(23,strlen(local_addr)), local_addr, netmax(23,strlen(rem_addr)), rem_addr, _(tcp_state[state]));
- 
- 	finish_this_one(uid,inode,timers);
-     }
-@@ -831,6 +839,7 @@
-     char buffer[8192], local_addr[64], rem_addr[64];
-     char *udp_state, timers[64], more[512];
-     int num, local_port, rem_port, d, state, timer_run, uid, timeout;
-+    char *protname;
- #if HAVE_AFINET6
-     struct sockaddr_in6 localaddr, remaddr;
-     char addr6[INET6_ADDRSTRLEN];
-@@ -847,13 +856,14 @@
- 
-     more[0] = '\0';
-     num = sscanf(line,
--		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-+		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
- 		 &d, local_addr, &local_port,
- 		 rem_addr, &rem_port, &state,
- 	  &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
- 
-     if (strlen(local_addr) > 8) {
- #if HAVE_AFINET6
-+	protname="udp6";
- 	sscanf(local_addr, "%08X%08X%08X%08X",
- 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
- 	       &in6.s6_addr32[2], &in6.s6_addr32[3]);
-@@ -868,6 +878,7 @@
- 	remaddr.sin6_family = AF_INET6;
- #endif
-     } else {
-+        protname="udp";
- 	sscanf(local_addr, "%X",
- 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
- 	sscanf(rem_addr, "%X",
-@@ -953,8 +964,8 @@
- 			 retr, timeout);
- 		break;
- 	    }
--	printf("udp   %6ld %6ld %-23s %-23s %-12s",
--	       rxq, txq, local_addr, rem_addr, udp_state);
-+	printf("%-4s  %6ld %6ld %-23s %-23s %-11s",
-+	       protname, rxq, txq, local_addr, rem_addr, udp_state);
- 
- 	finish_this_one(uid,inode,timers);
-     }
-@@ -971,6 +982,7 @@
-     char buffer[8192], local_addr[64], rem_addr[64];
-     char timers[64], more[512];
-     int num, local_port, rem_port, d, state, timer_run, uid, timeout;
-+    char *protname;
- #if HAVE_AFINET6
-     struct sockaddr_in6 localaddr, remaddr;
-     char addr6[INET6_ADDRSTRLEN];
-@@ -987,12 +999,13 @@
- 
-     more[0] = '\0';
-     num = sscanf(line,
--		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-+		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
- 		 &d, local_addr, &local_port, rem_addr, &rem_port, &state,
- 	  &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
- 
-     if (strlen(local_addr) > 8) {
- #if HAVE_AFINET6
-+	protname = "raw6";
- 	sscanf(local_addr, "%08X%08X%08X%08X",
- 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
-            &in6.s6_addr32[2], &in6.s6_addr32[3]);
-@@ -1007,6 +1020,7 @@
- 	remaddr.sin6_family = AF_INET6;
- #endif
-     } else {
-+        protname = "raw";
- 	sscanf(local_addr, "%X",
- 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
- 	sscanf(rem_addr, "%X",
-@@ -1074,8 +1088,8 @@
- 			 retr, timeout);
- 		break;
- 	    }
--	printf("raw   %6ld %6ld %-23s %-23s %-12d",
--	       rxq, txq, local_addr, rem_addr, state);
-+	printf("%-4s  %6ld %6ld %-23s %-23s %-11d",
-+	       protname, rxq, txq, local_addr, rem_addr, state);
- 
- 	finish_this_one(uid,inode,timers);
-     }
-@@ -1099,9 +1113,9 @@
-     static int has = 0;
-     char path[MAXPATHLEN], ss_flags[32];
-     char *ss_proto, *ss_state, *ss_type;
--    int num, state, type, inode;
-+    int num, state, type;
-     void *d;
--    unsigned long refcnt, proto, flags;
-+    unsigned long refcnt, proto, flags, inode;
- 
-     if (nr == 0) {
- 	if (strstr(line, "Inode"))
-@@ -1109,14 +1123,14 @@
- 	return;
-     }
-     path[0] = '\0';
--    num = sscanf(line, "%p: %lX %lX %lX %X %X %d %s",
-+    num = sscanf(line, "%p: %lX %lX %lX %X %X %lu %s",
- 		 &d, &refcnt, &proto, &flags, &type, &state, &inode, path);
-     if (num < 6) {
- 	fprintf(stderr, _("warning, got bogus unix line.\n"));
- 	return;
-     }
-     if (!(has & HAS_INODE))
--	snprintf(path,sizeof(path),"%d",inode);
-+	snprintf(path,sizeof(path),"%lu",inode);
- 
-     if (!flag_all) {
-     	if ((state == SS_UNCONNECTED) && (flags & SO_ACCEPTCON)) {
-@@ -1208,9 +1222,9 @@
-     printf("%-5s %-6ld %-11s %-10s %-13s ",
- 	   ss_proto, refcnt, ss_flags, ss_type, ss_state);
-     if (has & HAS_INODE)
--	printf("%-6d ",inode);
-+	printf("%-8lu ",inode);
-     else
--	printf("-      ");
-+	printf("-        ");
-     if (flag_prg)
- 	printf("%-" PROGNAME_WIDTHs "s",(has & HAS_INODE?prg_cache_get(inode):"-"));
-     puts(path);
-@@ -1229,7 +1243,7 @@
- 	printf(_("(w/o servers)"));
-     }
- 
--    printf(_("\nProto RefCnt Flags       Type       State         I-Node"));
-+    printf(_("\nProto RefCnt Flags       Type       State         I-Node  "));
-     print_progname_banner();
-     printf(_(" Path\n"));	/* xxx */
- 
-@@ -1256,7 +1270,7 @@
- 	N_("ESTABLISHED"),
- 	N_("RECOVERY")
-     };
--    if (!(f = fopen(_PATH_PROCNET_AX25, "r"))) {
-+    if (!(f = proc_fopen(_PATH_PROCNET_AX25))) {
- 	if (errno != ENOENT) {
- 	    perror(_PATH_PROCNET_AX25);
- 	    return (-1);
-@@ -1350,18 +1364,37 @@
-     char sad[50], dad[50];
-     struct sockaddr sa;
-     unsigned sport = 0, dport = 0;
--
--    if (!(f = fopen(_PATH_PROCNET_IPX, "r"))) {
--	if (errno != ENOENT) {
--	    perror(_PATH_PROCNET_IPX);
--	    return (-1);
--	}
--	if (flag_arg || flag_ver)
--	    ESYSNOT("netstat", "AF IPX");
--	if (flag_arg)
--	    return (1);
--	else
--	    return (0);
-+    struct stat s;
-+    
-+    f = proc_fopen(_PATH_PROCNET_IPX_SOCKET1);
-+    if (!f) {
-+        if (errno != ENOENT) {
-+            perror(_PATH_PROCNET_IPX_SOCKET1);
-+            return (-1);
-+        }
-+        f = proc_fopen(_PATH_PROCNET_IPX_SOCKET2);
-+
-+        /* We need to check for directory */
-+        if (f) {
-+            fstat(fileno(f), &s);
-+            if (!S_ISREG(s.st_mode)) {
-+                fclose(f);
-+                f=NULL;
-+            }
-+        }
-+
-+        if (!f) {
-+            if (errno != ENOENT) {
-+	        perror(_PATH_PROCNET_IPX_SOCKET2);
-+	        return (-1);
-+	    }
-+	    if (flag_arg || flag_ver)
-+	        ESYSNOT("netstat", "AF IPX");
-+	    if (flag_arg)
-+	        return (1);
-+ 	    else
-+	        return (0);
-+        }
-     }
-     printf(_("Active IPX sockets\nProto Recv-Q Send-Q Local Address              Foreign Address            State"));	/* xxx */
-     if (flag_exp > 1)
-@@ -1381,7 +1414,7 @@
- 	    sscanf(st, "%X", &sport);	/* net byt order */
- 	    sport = ntohs(sport);
- 	} else {
--	    EINTERN("netstat.c", _PATH_PROCNET_IPX " sport format error");
-+	    EINTERN("netstat.c", "ipx socket format error in source port");
- 	    return (-1);
- 	}
- 	nc = 0;
-@@ -1391,7 +1424,7 @@
- 		sscanf(st, "%X", &dport);	/* net byt order */
- 		dport = ntohs(dport);
- 	    } else {
--		EINTERN("netstat.c", _PATH_PROCNET_IPX " dport format error");
-+		EINTERN("netstat.c", "ipx soket format error in destination port");
- 		return (-1);
- 	    }
- 	} else
-@@ -1449,7 +1482,7 @@
-     }
-     if (flag_exp < 2) {
- 	ife_short = 1;
--	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-+	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-     }
- 
-     if (for_all_interfaces(do_if_print, &flag_all) < 0) {
-@@ -1457,7 +1490,7 @@
- 	exit(1);
-     }
-     if (flag_cnt)
--	free_interface_list();
-+	if_cache_free();
-     else {
- 	close(skfd);
- 	skfd = -1;
-@@ -1503,7 +1536,7 @@
-     fprintf(stderr, _("        -C, --cache              display routing cache instead of FIB\n\n"));
- 
-     fprintf(stderr, _("  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --netrom\n"));
--    fprintf(stderr, _("  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"), DFLT_AF);
-+    fprintf(stderr, _("  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"), DFLT_AF);
-     fprintf(stderr, _("  List of possible address families (which support routing):\n"));
-     print_aflist(1); /* 1 = routeable */
-     exit(E_USAGE);
-@@ -1514,7 +1547,7 @@
-  (int argc, char *argv[]) {
-     int i;
-     int lop;
--    struct option longopts[] =
-+    static struct option longopts[] =
-     {
- 	AFTRANS_OPTS,
- 	{"version", 0, 0, 'V'},
-@@ -1556,7 +1589,7 @@
-     getroute_init();		/* Set up AF routing support */
- 
-     afname[0] = '\0';
--    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuVv?wxl", longopts, &lop)) != EOF)
-+    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuVv?wxl64", longopts, &lop)) != EOF)
- 	switch (i) {
- 	case -1:
- 	    break;
-@@ -1624,6 +1657,14 @@
- 	case 'o':
- 	    flag_opt++;
- 	    break;
-+	case '6':
-+	    if (aftrans_opt("inet6"))
-+		exit(1);
-+	    break;
-+	case '4':
-+	    if (aftrans_opt("inet"))
-+		exit(1);
-+	    break;
- 	case 'V':
- 	    version();
- 	    /*NOTREACHED */
-@@ -1741,10 +1782,11 @@
- 	    }
- 	    printf(_("\nProto Recv-Q Send-Q Local Address           Foreign Address         State      "));	/* xxx */
- 	    if (flag_exp > 1)
--		printf(_(" User       Inode     "));
--	    print_progname_banner();
-+		printf(_(" User       Inode      "));
-+            if (flag_prg)
-+                printf(_(" PID/Program name"));
- 	    if (flag_opt)
--		printf(_(" Timer"));	/* xxx */
-+		printf(_(" Timer"));
- 	    printf("\n");
- #else
- 	    if (flag_arg) {
-@@ -1845,6 +1887,7 @@
- 	    }
- #endif
- 	}
-+	            
- 	if (!flag_cnt || i)
- 	    break;
- 	sleep(1);
---- net-tools-1.60.orig/route.c
-+++ net-tools-1.60/route.c
-@@ -2,7 +2,7 @@
-  * route        This file contains an implementation of the command
-  *              that manages the IP routing table in the kernel.
-  *
-- * Version:     $Id: route.c,v 1.9 2001/04/15 14:41:17 pb Exp $
-+ * Version:     $Id: route.c,v 1.10 2002/07/30 05:24:20 ecki Exp $
-  *
-  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-  *
-@@ -142,7 +142,7 @@
-     }
- 
-     /* Fetch the command-line arguments. */
--    while ((i = getopt_long(argc, argv, "A:eCFhnNVv?", longopts, &lop)) != EOF)
-+    while ((i = getopt_long(argc, argv, "A:eCFhnN64Vv?", longopts, &lop)) != EOF)
- 	switch (i) {
- 	case -1:
- 	    break;
-@@ -176,6 +176,14 @@
- 	    if ((i = aftrans_opt(optarg)))
- 		exit(i);
- 	    break;
-+	case '6':
-+	    if ((i = aftrans_opt("inet6")))
-+		exit(i);
-+	    break;
-+	case '4':
-+	    if ((i = aftrans_opt("inet")))
-+		exit(i);
-+	    break;
- 	case 'V':
- 	    version();
- 	case 'h':
---- net-tools-1.60.orig/statistics.c
-+++ net-tools-1.60/statistics.c
-@@ -1,6 +1,6 @@
- /*
-  * Copyright 1997,1999,2000 Andi Kleen. Subject to the GPL. 
-- * $Id: statistics.c,v 1.14 2001/02/02 18:01:23 pb Exp $
-+ * $Id: statistics.c,v 1.20 2007/12/01 18:44:56 ecki Exp $
-  * 19980630 - i18n - Arnaldo Carvalho de Melo <acme@conectiva.com.br> 
-  * 19981113 - i18n fixes - Arnaldo Carvalho de Melo <acme@conectiva.com.br> 
-  * 19990101 - added net/netstat, -t, -u, -w supprt - Bernd Eckenfels 
-@@ -11,6 +11,7 @@
- #include <string.h>
- #include "config.h"
- #include "intl.h"
-+#include "proc.h"
- 
- /* #define WARN 1 */
- 
-@@ -172,19 +173,59 @@
-     { "DelayedACKLost", N_("Quick ack mode was activated %u times"), opt_number },
-     { "ListenOverflows", N_("%u times the listen queue of a socket overflowed"),
-       opt_number },
--    { "ListenDrops", N_("%u SYNs to LISTEN sockets ignored"), opt_number },
-+    { "ListenDrops", N_("%u SYNs to LISTEN sockets dropped"), opt_number },
-     { "TCPPrequeued", N_("%u packets directly queued to recvmsg prequeue."), 
-       opt_number },
--    { "TCPDirectCopyFromBacklog", N_("%u packets directly received"
--				     " from backlog"), opt_number },
--    { "TCPDirectCopyFromPrequeue", N_("%u packets directly received"
--				      " from prequeue"), opt_number },
-+    { "TCPDirectCopyFromBacklog", N_("%u bytes directly in process context from backlog"), opt_number },
-+    { "TCPDirectCopyFromPrequeue", N_("%u bytes directly received in process context from prequeue"),
-+				      opt_number },
-     { "TCPPrequeueDropped", N_("%u packets dropped from prequeue"), opt_number },
--    { "TCPHPHits", N_("%u packets header predicted"), number },
-+    { "TCPHPHits", N_("%u packet headers predicted"), number },
-     { "TCPHPHitsToUser", N_("%u packets header predicted and "
- 			    "directly queued to user"), opt_number },
-     { "SockMallocOOM", N_("Ran %u times out of system memory during " 
- 			  "packet sending"), opt_number }, 
-+    { "TCPPureAcks", N_("%u acknowledgments not containing data payload received"), opt_number },
-+    { "TCPHPAcks", N_("%u predicted acknowledgments"), opt_number },
-+    { "TCPRenoRecovery", N_("%u times recovered from packet loss due to fast retransmit"), opt_number },
-+    { "TCPSackRecovery", N_("%u times recovered from packet loss by selective acknowledgements"), opt_number },
-+    { "TCPSACKReneging", N_("%u bad SACK blocks received"), opt_number },
-+    { "TCPFACKReorder", N_("Detected reordering %u times using FACK"), opt_number },
-+    { "TCPSACKReorder", N_("Detected reordering %u times using SACK"), opt_number },
-+    { "TCPTSReorder", N_("Detected reordering %u times using time stamp"), opt_number },
-+    { "TCPRenoReorder", N_("Detected reordering %u times using reno fast retransmit"), opt_number },
-+    { "TCPFullUndo", N_("%u congestion windows fully recovered without slow start"), opt_number }, 
-+    { "TCPPartialUndo", N_("%u congestion windows partially recovered using Hoe heuristic"), opt_number },
-+    { "TCPDSackUndo", N_("%u congestion window recovered without slow start using DSACK"), opt_number },
-+    { "TCPLossUndo", N_("%u congestion windows recovered without slow start after partial ack"), opt_number },
-+    { "TCPLostRetransmits", N_("%u retransmits lost"), opt_number },
-+    { "TCPRenoFailures",  N_("%u timeouts after reno fast retransmit"), opt_number },
-+    { "TCPSackFailures",  N_("%u timeouts after SACK recovery"), opt_number },
-+    { "TCPLossFailures",  N_("%u timeouts in loss state"), opt_number },
-+    { "TCPFastRetrans", N_("%u fast retransmits"), opt_number },
-+    { "TCPForwardRetrans", N_("%u forward retransmits"), opt_number }, 
-+    { "TCPSlowStartRetrans", N_("%u retransmits in slow start"), opt_number },
-+    { "TCPTimeouts", N_("%u other TCP timeouts"), opt_number },
-+    { "TCPRenoRecoveryFailed", N_("%u reno fast retransmits failed"), opt_number },
-+    { "TCPSackRecoveryFail", N_("%u SACK retransmits failed"), opt_number },
-+    { "TCPSchedulerFailed", N_("%u times receiver scheduled too late for direct processing"), opt_number },
-+    { "TCPRcvCollapsed", N_("%u packets collapsed in receive queue due to low socket buffer"), opt_number },
-+    { "TCPDSACKOldSent", N_("%u DSACKs sent for old packets"), opt_number },
-+    { "TCPDSACKOfoSent", N_("%u DSACKs sent for out of order packets"), opt_number },
-+    { "TCPDSACKRecv", N_("%u DSACKs received"), opt_number },
-+    { "TCPDSACKOfoRecv", N_("%u DSACKs for out of order packets received"), opt_number },
-+    { "TCPAbortOnSyn", N_("%u connections reset due to unexpected SYN"), opt_number },
-+    { "TCPAbortOnData", N_("%u connections reset due to unexpected data"), opt_number },
-+    { "TCPAbortOnClose", N_("%u connections reset due to early user close"), opt_number },
-+    { "TCPAbortOnMemory", N_("%u connections aborted due to memory pressure"), opt_number },
-+    { "TCPAbortOnTimeout", N_("%u connections aborted due to timeout"), opt_number },
-+    { "TCPAbortOnLinger", N_("%u connections aborted after user close in linger timeout"), opt_number },
-+    { "TCPAbortFailed", N_("%u times unabled to send RST due to no memory"), opt_number }, 
-+    { "TCPMemoryPressures", N_("TCP ran low on memory %u times"), opt_number }, 
-+    { "TCPLoss", N_("%u TCP data loss events"), opt_number },
-+    { "TCPDSACKUndo", N_("%u congestion windows recovered without slow start by DSACK"), 
-+	opt_number },
-+    { "TCPRenoRecoveryFail", N_("%u classic Reno fast retransmits failed"), opt_number },
- };
- 
- struct tabtab {
-@@ -222,7 +263,8 @@
- 	    ent = bsearch(&key, tab->tab, tab->size / sizeof(struct entry),
- 			  sizeof(struct entry), cmpentries);
-     if (!ent) {			/* try our best */
--	printf("%*s%s: %d\n", states[state].indent, "", title, val);
-+	if (val) 
-+		printf("%*s%s: %d\n", states[state].indent, "", title, val);
- 	return;
-     }
-     type = ent->type;
-@@ -289,14 +331,17 @@
- 	return &dummytab;
- }
- 
--void process_fd(FILE *f)
-+int process_fd(FILE *f)
- {
--    char buf1[1024], buf2[1024];
-+    char buf1[2048], buf2[2048];
-     char *sp, *np, *p;
-     while (fgets(buf1, sizeof buf1, f)) {
- 	int endflag;
- 	struct tabtab *tab;
- 
-+        if (buf1[0] == '\n') // skip empty first line in 2.6 kernels
-+            continue;
-+            
- 	if (!fgets(buf2, sizeof buf2, f))
- 	    break;
- 	sp = strchr(buf1, ':');
-@@ -330,11 +375,10 @@
- 	    sp = p + 1;
- 	}
-     }
--  return;
-+  return 0;
-   
- formaterr:
--  perror(_("error parsing /proc/net/snmp"));
--  return;
-+  return -1;
- }
- 
- 
-@@ -344,22 +388,25 @@
- 
-     f_raw = flag_raw; f_tcp = flag_tcp; f_udp = flag_udp;
-     
--    f = fopen("/proc/net/snmp", "r");
-+    f = proc_fopen("/proc/net/snmp");
-     if (!f) {
- 	perror(_("cannot open /proc/net/snmp"));
- 	return;
-     }
--    process_fd(f);
-+
-+    if (process_fd(f) < 0)
-+      fprintf(stderr, _("Problem while parsing /proc/net/snmp\n"));
- 
-     if (ferror(f))
- 	perror("/proc/net/snmp");
- 
-     fclose(f);
- 
--    f = fopen("/proc/net/netstat", "r");
-+    f = proc_fopen("/proc/net/netstat");
- 
-     if (f) {
--    	process_fd(f);
-+    	if (process_fd(f) <0)
-+          fprintf(stderr, _("Problem while parsing /proc/net/netstat\n"));
- 
-         if (ferror(f))
- 	    perror("/proc/net/netstat");
---- net-tools-1.60.orig/nameif.c
-+++ net-tools-1.60/nameif.c
-@@ -3,7 +3,7 @@
-  * Writen 2000 by Andi Kleen.
-  * Subject to the Gnu Public License, version 2.  
-  * TODO: make it support token ring etc.
-- * $Id: nameif.c,v 1.1 2000/10/18 17:26:29 ak Exp $
-+ * $Id: nameif.c,v 1.4 2003/09/11 03:46:49 ak Exp $
-  */ 
- #ifndef _GNU_SOURCE 
- #define _GNU_SOURCE
-@@ -117,7 +117,8 @@
- }
- 
- struct change { 
--	struct change *next,**pprev;
-+	struct change *next;
-+	int found;
- 	char ifname[IFNAMSIZ+1];
- 	unsigned char mac[6];
- }; 
-@@ -139,10 +140,7 @@
- 			ch->ifname, pos); 
- 	if (parsemac(p,ch->mac) < 0) 
- 		complain(_("cannot parse MAC `%s' at %s"), p, pos); 
--	if (clist) 
--		clist->pprev = &ch->next;
- 	ch->next = clist;
--	ch->pprev = &clist;
- 	clist = ch;
- 	return 0; 
- }
-@@ -177,7 +175,7 @@
- 		if (*p == '\0')
- 			continue; 
- 		n = strcspn(p, " \t"); 
--		if (n > IFNAMSIZ) 
-+		if (n > IFNAMSIZ-1) 
- 			complain(_("interface name too long at line %d"), line);  
- 		memcpy(ch->ifname, p, n); 
- 		ch->ifname[n] = 0; 
-@@ -200,7 +198,7 @@
- 
- void usage(void)
- {
--	fprintf(stderr, _("usage: nameif [-c configurationfile] [-s] {ifname macaddress}")); 
-+	fprintf(stderr, _("usage: nameif [-c configurationfile] [-s] {ifname macaddress}\n")); 
- 	exit(1); 
- }
- 
-@@ -277,21 +275,21 @@
- 		ch = lookupmac(mac); 
- 		if (!ch) 
- 			continue;
--			
--		*ch->pprev = ch->next;
-+		
-+		ch->found = 1;	
- 		if (strcmp(p, ch->ifname)) { 
- 			if (setname(p, ch->ifname) < 0)  
- 				complain(_("cannot change name of %s to %s: %s"),
- 						p, ch->ifname, strerror(errno)); 
- 		} 
--		free(ch);
- 	} 
- 	fclose(ifh); 
- 	
- 	while (clist) { 
- 		struct change *ch = clist;
- 		clist = clist->next;
--		warning(_("interface '%s' not found"), ch->ifname); 
-+		if (!ch->found)
-+			warning(_("interface '%s' not found"), ch->ifname); 
- 		free(ch); 
- 	}
- 
---- net-tools-1.60.orig/mii-tool.c
-+++ net-tools-1.60/mii-tool.c
-@@ -29,8 +29,7 @@
- 	http://www.national.com/pf/DP/DP83840.html
- */
- 
--static char version[] =
--"mii-tool.c 1.9 2000/04/28 00:56:08 (David Hinds)\n";
-+static char Version[] = "$Id: mii-tool.c,v 1.9 2006/09/27 20:59:18 ecki Exp $\n(Author: David Hinds based on Donald Becker's mii-diag)";
- 
- #include <unistd.h>
- #include <stdlib.h>
-@@ -46,16 +45,19 @@
- #include <sys/socket.h>
- #include <sys/ioctl.h>
- #include <net/if.h>
-+#include <linux/sockios.h>
-+
- #ifndef __GLIBC__
- #include <linux/if_arp.h>
- #include <linux/if_ether.h>
- #endif
- #include "mii.h"
-+#include "version.h"
- 
- #define MAX_ETH		8		/* Maximum # of interfaces */
- 
- /* Table of known MII's */
--static struct {
-+static const struct {
-     u_short	id1, id2;
-     char	*name;
- } mii_id[] = {
-@@ -74,6 +76,9 @@
-     { 0x0181, 0x4410, "Quality QS6612" },
-     { 0x0282, 0x1c50, "SMSC 83C180" },
-     { 0x0300, 0xe540, "TDK 78Q2120" },
-+    { 0x0141, 0x0c20, "Yukon 88E1011" },
-+    { 0x0141, 0x0cc0, "Yukon-EC 88E1111" },
-+    { 0x0141, 0x0c90, "Yukon-2 88E1112" },
- };
- #define NMII (sizeof(mii_id)/sizeof(mii_id[0]))
- 
-@@ -137,40 +142,48 @@
- 
- const struct {
-     char	*name;
--    u_short	value;
-+    u_short	value[2];
- } media[] = {
-     /* The order through 100baseT4 matches bits in the BMSR */
--    { "10baseT-HD",	MII_AN_10BASET_HD },
--    { "10baseT-FD",	MII_AN_10BASET_FD },
--    { "100baseTx-HD",	MII_AN_100BASETX_HD },
--    { "100baseTx-FD",	MII_AN_100BASETX_FD },
--    { "100baseT4",	MII_AN_100BASET4 },
--    { "100baseTx",	MII_AN_100BASETX_FD | MII_AN_100BASETX_HD },
--    { "10baseT",	MII_AN_10BASET_FD | MII_AN_10BASET_HD },
-+    { "10baseT-HD",	{MII_AN_10BASET_HD} },
-+    { "10baseT-FD",	{MII_AN_10BASET_FD} },
-+    { "100baseTx-HD",	{MII_AN_100BASETX_HD} },
-+    { "100baseTx-FD",	{MII_AN_100BASETX_FD} },
-+    { "100baseT4",	{MII_AN_100BASET4} },
-+    { "100baseTx",	{MII_AN_100BASETX_FD | MII_AN_100BASETX_HD} },
-+    { "10baseT",	{MII_AN_10BASET_FD | MII_AN_10BASET_HD} },
-+
-+    { "1000baseT-HD",	{0, MII_BMCR2_1000HALF} },
-+    { "1000baseT-FD",	{0, MII_BMCR2_1000FULL} },
-+    { "1000baseT",	{0, MII_BMCR2_1000HALF|MII_BMCR2_1000FULL} },
- };
- #define NMEDIA (sizeof(media)/sizeof(media[0]))
- 	
- /* Parse an argument list of media types */
--static int parse_media(char *arg)
-+static int parse_media(char *arg, unsigned *bmcr2)
- {
-     int mask, i;
-     char *s;
-     mask = strtoul(arg, &s, 16);
-     if ((*arg != '\0') && (*s == '\0')) {
- 	if ((mask & MII_AN_ABILITY_MASK) &&
--	    !(mask & ~MII_AN_ABILITY_MASK))
--	    return mask;
-+	    !(mask & ~MII_AN_ABILITY_MASK)) {
-+		*bmcr2 = 0;
-+		return mask;
-+	}
- 	goto failed;
--    } else {
--	mask = 0;
--	s = strtok(arg, ", ");
--	do {
-+    }
-+    mask = 0;
-+    *bmcr2 = 0;
-+    s = strtok(arg, ", ");
-+    do {
- 	    for (i = 0; i < NMEDIA; i++)
--		if (strcasecmp(media[i].name, s) == 0) break;
-+		if (s && strcasecmp(media[i].name, s) == 0) break;
- 	    if (i == NMEDIA) goto failed;
--	    mask |= media[i].value;
--	} while ((s = strtok(NULL, ", ")) != NULL);
--    }
-+	    mask |= media[i].value[0];
-+	    *bmcr2 |= media[i].value[1];
-+    } while ((s = strtok(NULL, ", ")) != NULL);
-+
-     return mask;
- failed:
-     fprintf(stderr, "Invalid media specification '%s'.\n", arg);
-@@ -179,11 +192,24 @@
- 
- /*--------------------------------------------------------------------*/
- 
--static char *media_list(int mask, int best)
-+static const char *media_list(unsigned mask, unsigned mask2, int best)
- {
-     static char buf[100];
-     int i;
-     *buf = '\0';
-+
-+    if (mask & MII_BMCR_SPEED1000) {
-+	if (mask2 & MII_BMCR2_1000HALF) {
-+	    strcat(buf, " ");
-+	    strcat(buf, "1000baseT-HD");
-+	    if (best) goto out;
-+	}
-+	if (mask2 & MII_BMCR2_1000FULL) {
-+	    strcat(buf, " ");
-+	    strcat(buf, "1000baseT-FD");
-+	    if (best) goto out;
-+	}
-+    }
-     mask >>= 5;
-     for (i = 4; i >= 0; i--) {
- 	if (mask & (1<<i)) {
-@@ -192,6 +218,7 @@
- 	    if (best) break;
- 	}
-     }
-+ out:
-     if (mask & (1<<5))
- 	strcat(buf, " flow-control");
-     return buf;
-@@ -201,15 +228,15 @@
- {
-     char buf[100];
-     int i, mii_val[32];
--    int bmcr, bmsr, advert, lkpar;
-+    unsigned bmcr, bmsr, advert, lkpar, bmcr2, lpa2;
- 
-     /* Some bits in the BMSR are latched, but we can't rely on being
-        the only reader, so only the current values are meaningful */
-     mdio_read(sock, MII_BMSR);
--    for (i = 0; i < ((verbose > 1) ? 32 : 8); i++)
-+    for (i = 0; i < ((verbose > 1) ? 32 : MII_BASIC_MAX); i++)
- 	mii_val[i] = mdio_read(sock, i);
- 
--    if (mii_val[MII_BMCR] == 0xffff) {
-+    if (mii_val[MII_BMCR] == 0xffff  || mii_val[MII_BMSR] == 0x0000) {
- 	fprintf(stderr, "  No MII transceiver present!.\n");
- 	return -1;
-     }
-@@ -217,6 +244,7 @@
-     /* Descriptive rename. */
-     bmcr = mii_val[MII_BMCR]; bmsr = mii_val[MII_BMSR];
-     advert = mii_val[MII_ANAR]; lkpar = mii_val[MII_ANLPAR];
-+    bmcr2 = mii_val[MII_CTRL1000]; lpa2 = mii_val[MII_STAT1000];
- 
-     sprintf(buf, "%s: ", ifr.ifr_name);
-     if (bmcr & MII_BMCR_AN_ENA) {
-@@ -224,7 +252,7 @@
- 	    if (advert & lkpar) {
- 		strcat(buf, (lkpar & MII_AN_ACK) ?
- 		       "negotiated" : "no autonegotiation,");
--		strcat(buf, media_list(advert & lkpar, 1));
-+		strcat(buf, media_list(advert & lkpar, bmcr2 & lpa2>>2, 1));
- 		strcat(buf, ", ");
- 	    } else {
- 		strcat(buf, "autonegotiation failed, ");
-@@ -234,8 +262,10 @@
- 	}
-     } else {
- 	sprintf(buf+strlen(buf), "%s Mbit, %s duplex, ",
--	       (bmcr & MII_BMCR_100MBIT) ? "100" : "10",
--	       (bmcr & MII_BMCR_DUPLEX) ? "full" : "half");
-+		((bmcr2 & (MII_BMCR2_1000HALF | MII_BMCR2_1000FULL)) & lpa2 >> 2)
-+		? "1000"
-+		: (bmcr & MII_BMCR_100MBIT) ? "100" : "10",
-+		(bmcr & MII_BMCR_DUPLEX) ? "full" : "half");
-     }
-     strcat(buf, (bmsr & MII_BMSR_LINK_VALID) ? "link ok" : "no link");
- 
-@@ -296,12 +326,13 @@
- 	if (bmsr & MII_BMSR_REMOTE_FAULT)
- 	    printf("remote fault, ");
- 	printf((bmsr & MII_BMSR_LINK_VALID) ? "link ok" : "no link");
--	printf("\n  capabilities:%s", media_list(bmsr >> 6, 0));
--	printf("\n  advertising: %s", media_list(advert, 0));
-+	printf("\n  capabilities:%s", media_list(bmsr >> 6, bmcr2, 0));
-+	printf("\n  advertising: %s", media_list(advert, lpa2 >> 2, 0));
- 	if (lkpar & MII_AN_ABILITY_MASK)
--	    printf("\n  link partner:%s", media_list(lkpar, 0));
-+	    printf("\n  link partner:%s", media_list(lkpar, bmcr2, 0));
- 	printf("\n");
-     }
-+    fflush(stdout);
-     return 0;
- }
- 
-@@ -329,7 +360,7 @@
- 	printf("resetting the transceiver...\n");
- 	mdio_write(skfd, MII_BMCR, MII_BMCR_RESET);
-     }
--    if (nway_advertise) {
-+    if (nway_advertise > 0) {
- 	mdio_write(skfd, MII_ANAR, nway_advertise | 1);
- 	opt_restart = 1;
-     }
-@@ -379,27 +410,38 @@
- /*--------------------------------------------------------------------*/
- 
- const char *usage =
--"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...]
--       -V, --version               display version information
--       -v, --verbose               more verbose output
--       -R, --reset                 reset MII to poweron state
--       -r, --restart               restart autonegotiation
--       -w, --watch                 monitor for link status changes
--       -l, --log                   with -w, write events to syslog
--       -A, --advertise=media,...   advertise only specified media
--       -F, --force=media           force specified media technology
--media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
--       (to advertise both HD and FD) 100baseTx, 10baseT\n";
-+"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...]\n"
-+"       -V, --version               display version information\n"
-+"       -v, --verbose               more verbose output\n"
-+"       -R, --reset                 reset MII to poweron state\n"
-+"       -r, --restart               restart autonegotiation\n"
-+"       -w, --watch                 monitor for link status changes\n"
-+"       -l, --log                   with -w, write events to syslog\n"
-+"       -A, --advertise=media,...   advertise only specified media\n"
-+"       -F, --force=media           force specified media technology\n"
-+"media: 1000baseTx-HD, 1000baseTx-FD,\n"
-+"       100baseT4, 100baseTx-FD, 100baseTx-HD,\n"
-+"       10baseT-FD, 10baseT-HD,\n"
-+"       (to advertise both HD and FD) 1000baseTx, 100baseTx, 10baseT\n";
-+
-+
-+static void version(void)
-+{
-+    fprintf(stderr, "%s\n%s\n", Version, RELEASE);
-+    exit(5); /* E_VERSION */
-+}
-+
- 
- int main(int argc, char **argv)
- {
-     int i, c, ret, errflag = 0;
-     char s[6];
-+    unsigned ctrl1000 = 0;
-     
-     while ((c = getopt_long(argc, argv, "A:F:p:lrRvVw?", longopts, 0)) != EOF)
- 	switch (c) {
--	case 'A': nway_advertise = parse_media(optarg); break;
--	case 'F': fixed_speed = parse_media(optarg); break;
-+	case 'A': nway_advertise = parse_media(optarg, &ctrl1000); break;
-+	case 'F': fixed_speed = parse_media(optarg, &ctrl1000); break;
- 	case 'p': override_phy = atoi(optarg); break;
- 	case 'r': opt_restart++;	break;
- 	case 'R': opt_reset++;		break;
-@@ -411,6 +453,10 @@
- 	}
-     /* Check for a few inappropriate option combinations */
-     if (opt_watch) verbose = 0;
-+
-+    if ((nway_advertise < 0) || (fixed_speed < 0))
-+    	return 2;
-+
-     if (errflag || (fixed_speed & (fixed_speed-1)) ||
- 	(fixed_speed && (opt_restart || nway_advertise))) {
- 	fprintf(stderr, usage, argv[0]);
-@@ -418,7 +464,7 @@
-     }
- 
-     if (opt_version)
--	printf(version);
-+	version();
- 
-     /* Open a basic socket. */
-     if ((skfd = socket(AF_INET, SOCK_DGRAM,0)) < 0) {
-@@ -426,6 +472,9 @@
- 	exit(-1);
-     }
- 
-+    if (verbose > 1)
-+    	printf("Using SIOCGMIIPHY=0x%x\n", SIOCGMIIPHY);	
-+
-     /* No remaining args means show all interfaces. */
-     if (optind == argc) {
- 	ret = 1;
---- net-tools-1.60.orig/debian/changelog
-+++ net-tools-1.60/debian/changelog
-@@ -0,0 +1,277 @@
-+net-tools (1.60-19) unstable; urgency=low
-+
-+  * fixed netstat(8) (interfaceS) reported by Liu Xing. (Closes Bug #435690)
-+  * fixed interface name truncation (Closes Bug #405521)
-+    Thank you Csaba Szep.
-+  * fixed pt error string (Closes: Bug#403033)
-+  * fixed route samples (Closes: Bug#400844, #368697) Thanks Danny Rathjens.
-+  * fixed ifconfig(8) see also section (Closes: Bug#365916) Dan Jacobs.
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 02 Dec 2007 06:27:41 +0100
-+
-+net-tools (1.60-18) unstable; urgency=low
-+
-+  * Thanks for the l10n NMU to Kenshi Muto
-+  * fixed hostname compile problems
-+  * better error handling and speedup for proc file reading
-+  * improved mii-tool (more media types)
-+  * fixed string length contraint in ipmaddr
-+  * fixed ipx /proc/net (alternate naming)
-+  * smaller fixed to netstat(8) (de) 2002-02-20 - still incomplete
-+  * expanded arp(8) (en) 2007-12-01
-+  * added -4 and -6 to netstat(8) 02 October 2003
-+  * formatting fixed rarp(8)+slattach(8)  [en]
-+  * formatting fixed arp(8), rarp(8), ifconfig(8), hostname(1) [fr]
-+  * fixed slattach -L to not require HW handshake anymore
-+  * netstat -n: show v4inv6 mapped addressses as v4
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 02 Dec 2007 03:28:17 +0100
-+
-+net-tools (1.60-17.2) unstable; urgency=low
-+
-+  * l10n NMU
-+  * Set conflict against ja-trans which has obsolete Japanese
-+    translations only for net-tools. (closes: #447327)
-+
-+ -- Kenshi Muto <kmuto@debian.org>  Sat, 20 Oct 2007 18:00:34 +0900
-+
-+net-tools (1.60-17.1) unstable; urgency=low
-+
-+  * l10n NMU
-+  * Updated net-tools.pot.
-+  * Updated Japanese translation (closes: Bug#432338)
-+  * Updated German translation (closes: #313808)
-+
-+ -- Kenshi Muto <kmuto@debian.org>  Thu, 11 Oct 2007 19:44:26 +0900
-+
-+net-tools (1.60-17) unstable; urgency=medium
-+
-+  * arp.c: bus error on sparc64 with latest gcc fixed. (Closes: Bug#340384)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 04 Dec 2005 05:47:05 +0100
-+
-+net-tools (1.60-16) unstable; urgency=low
-+
-+  * spelling fix to slattach(8) (Closes: Bug#326124 (patch by A.Costa)
-+  * inet.c: portability fix for 64bit.
-+  * comment cleanups to aliagn with 1.65 cvs
-+    * net-support.h, inet_sr.c, nstrcmp.c, arp.c, ether.h
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 24 Oct 2005 22:05:38 +0200
-+
-+net-tools (1.60-15) unstable; urgency=low
-+
-+  * minor formating fix to ifconfig(8)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 30 Jun 2005 21:49:52 +0200
-+
-+net-tools (1.60-14) unstable; urgency=low
-+
-+  * added iptables(8) in ifconfig(8) (thanks Toralf Förster)
-+  * more usage updates in ifconfig.8 (used upstream HEAD=1.11)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 30 Jun 2005 20:51:18 +0200
-+
-+net-tools (1.60-13) unstable; urgency=low  Thu, 30 Jun 2005 20:49:57 +0200
-+
-+  * X25 code compiles with 2.4 and 2.6 kernel headers (Closes: Bug#271678)
-+  * IMPORTANT: make ifconfig show alias interfaces in 2.6 again. 
-+  * resort media type array to match kernel (Closes: Bug#199920)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Tue, 17 May 2005 01:28:51 +0200
-+
-+net-tools (1.60-12) unstable; urgency=low
-+
-+  * make TR hw address type work for new kernel (Closes: Bug #79462, #203400)
-+  * update-po uses msgmerge, new net-tools.pot (Closes: Bug: 271426)
-+  * de-support dontpub option in arp -? und arp.8 (Closes: Bug #203396)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 16 May 2005 06:33:48 +0200
-+
-+net-tools (1.60-11) unstable; urgency=low
-+
-+  * spelling fixes (Closes: Bug #305640, #305638, 305637)
-+  * nameif.c avoid overflow by malicious kernel
-+  * avoid overflow of the TX-OK Column (Closes: Bug #308922)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 14 May 2005 01:48:45 +0200
-+
-+net-tools (1.60-10) unstable; urgency=low
-+
-+  * typo fix in po/de.po for german arp command output (Closes: Bug #176151)
-+  * added diagnostics messages to mii-tool.8 (Closes: Bug #239229)
-+  * new version of nstrcmp (Closes: Bug #226503)
-+  * enable EUI64 support
-+  * stadanrds version 3.6.1 (no changes)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Fri, 23 Apr 2004 00:57:20 +0200
-+
-+net-tools (1.60-9) unstable; urgency=medium
-+
-+  * debian/changelog: fixed in last entry fixed bug from 197925 to 197924
-+  * include linux/sockios.h for SIOCGMIIPHY definition (new style)
-+    which will fix MII reporting on 2.4 kernels. (Closes: Bug #133648)
-+    NOTE: this will now require root to work, it will also not work on
-+    older kernels.
-+  * Rene Engelhard's patch to make AF X25 compile with 2.6 headers (Closes: Bug #223091)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 29 Dec 2003 13:42:20 +0100
-+
-+net-tools (1.60-8) unstable; urgency=medium
-+
-+  * lib/interface.c: backed off change which skipped reading ioctl 
-+    interfacelist, if _proc interfacelist was ok, which does not work,
-+    because alias interfaces are only in ioctl list available. It is 
-+    also falling back to the original lib/nstrcml.c because the
-+    comparision if : is present does not work.
-+    (Closes: bug #197924, #197582, #197269)
-+  * bumped standards version (no changes)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 28 Jun 2003 02:56:38 +0200
-+
-+net-tools (1.60-7) unstable; urgency=low
-+
-+  * interfaces.c: cvs version fixes Connectiva Bug #5711 (Closes: #149576)
-+    from Eduardo Pereira Habkost
-+  * netstat.c: cvs version adds support for tcp6,udp6,icmp6 protocols
-+  * netstat.c: cvs version adds support for -4 or -6 cmd line shortcut
-+  * netstat.c: cvs version adds fix for inode 
-+    signedness (Closes: #134600, #78932)
-+  * ifconfig: removed -i from usage (Closes: #181528)
-+  * make gcc 3.3 happy: added ull unsigned long long prefix to constant
-+  * lib/ddp_gr.c+pathnames.h: first support for appletalk routing from cvs
-+  * lib/eui64.c+hw.c+Makefile: forst support for new hw type from cvs
-+  * lib/interface.c: cvs fix for column run-into (Closes: #161080)
-+  * lib/irda.c,lib/ipx.c: cvs update
-+  * lib/nstrcmp.c: new, faster version, fixes b-lookups for ifconfig
-+  * hostanme.c: gcc 3.3 fix from cvs (not compiled in net-tools.deb)
-+  * lib/interface: fixed memory globbering
-+    (Closes: #135744, #149579, #185187)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 12 Jun 2003 05:44:38 +0200
-+
-+net-tools (1.60-6) unstable; urgency=low
-+
-+  * took route.c from upstream cvs: allow -6 and -4 option
-+  * took statistics.c from upstream cvs: more complete netstat -S
-+  * took README from upstream cvs: fix COPYING file title and removed
-+    the line (Closes: #102139)
-+  * took arp.c from upstream: fixed name "PUB", better not found handling,
-+    implicite proxy arp mac changed from '*' to '<from_interface>',
-+    usage line made shorter
-+  * added mii-tool in control file (Closes: #172473)
-+  * fixed description of binary multiple in man page (Closes: #182487)
-+  * fixed interpunctation in netstat(8) (Closes: #191660)
-+  * fixed compile warning in inet_sr.c by removing empty default: label in
-+    switch
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Wed, 28 May 2003 22:35:12 +0200
-+
-+net-tools (1.60-5) unstable; urgency=low
-+
-+  * thanks Andrew for the 4.1 NMU
-+  * NMU: Apply nameif patch from Matt Domsch. (Closes: #178209)
-+  * Fix FTB bug (string concatenation in gcc 3.3) (Closes: #194995)
-+  * Fix segfault in mii-tool by using cvs version (Closes: #139027)
-+  * fixed plural of authors to make lintian happy (I JOIN YOU :)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Wed, 28 May 2003 22:04:14 +0200
-+
-+net-tools (1.60-4.1) unstable; urgency=low
-+
-+  * NMU
-+  * Apply nameif patch from Matt Domsch. (Closes: #178209)
-+
-+ -- Andrew Suffield <asuffield@debian.org>  Wed,  9 Apr 2003 21:44:09 +0100
-+
-+net-tools (1.60-4) unstable; urgency=medium
-+
-+  * fixed (upstream) spurious newline in ifconfig
-+    Thanks Jonathen, Closes: Bug #109379
-+  * fixed SI-Units printout in ifconfig (Closes: Bug #110629, #97029, #100167)
-+  * this is done by including lib/interfaces.c from upstream cvs
-+  * also added ifconfig man page from upstream cvs
-+  * fixed (upstream) man page about netstat's --interface opt. (Closes: Bug#120475)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 24 Nov 2001 06:26:37 +0100
-+
-+net-tools (1.60-3) unstable; urgency=medium
-+
-+  * fixed upstream error where counters in ifconfig/netstat -i are 0
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 10 Nov 2001 18:12:13 +0100
-+
-+net-tools (1.60-2) unstable; urgency=low
-+
-+  * Fixed the following bug: (Closes: #117837)
-+  * inserted ifconfig.c from upstream cvs to do this
-+  * bumped debian Standard 3.1.1 -> 3.5.6 and removed -g from linking
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu,  1 Nov 2001 02:51:33 +0100
-+
-+net-tools (1.60-1) unstable; urgency=low
-+
-+  * New upstream
-+  * Phil fixed the following Bugs upstream: (Closes: #91919, #93048, #90282)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 16 Apr 2001 02:28:12 +0200
-+
-+net-tools (1.59-1) unstable; urgency=low
-+
-+  * added Build Dependencies (closes bug: #89083)
-+  * new upstream version
-+  * removed dh_suidregister and a few comments from rules file
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 18 Mar 2001 03:00:33 +0100
-+
-+net-tools (1.58-2) unstable; urgency=low
-+
-+  * backported ifconfig change from 1.59 to avoid closing socket too early
-+    on some systems (depending on the protocols installed). 
-+    Closes Bug: #85688, #85743
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Tue, 13 Feb 2001 01:39:59 +0100
-+
-+net-tools (1.58-1) unstable; urgency=low
-+
-+  * new upstream version
-+  * removed local man pages for now (Closes: bug #83894)
-+  * install nameif in /sbin
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 10 Feb 2001 21:50:30 +0100
-+
-+net-tools (1.57-2) unstable; urgency=high
-+
-+  * rebuild, this is believed to closes: #75825
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 30 Dec 2000 22:43:01 +0100
-+
-+net-tools (1.57-1) unstable; urgency=low
-+
-+  * new debian maintainer (thanks Anthony for the Work!)
-+  * new upstream version
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 14 Aug 2000 02:40:13 +0200
-+
-+net-tools (1.54-3) unstable; urgency=low
-+
-+  * Argggh. Don't use that horrible dh_installmanpages hack. (Closes:
-+    Bug#68925, Bug#68879)
-+
-+ -- Anthony Towns <ajt@debian.org>  Sun, 13 Aug 2000 00:12:05 +1000
-+
-+net-tools (1.54-2) unstable; urgency=low
-+
-+  * Reapply slattach patch from netbase 3.16-3.
-+
-+ -- Anthony Towns <ajt@debian.org>  Thu, 10 Aug 2000 11:32:58 +1000
-+
-+net-tools (1.54-1) unstable; urgency=low
-+
-+  * Split from netbase.
-+
-+ -- Anthony Towns <ajt@debian.org>  Mon, 17 Jul 2000 07:34:12 +1000
-+
-+Local variables:
-+mode: debian-changelog
-+End:
---- net-tools-1.60.orig/debian/copyright
-+++ net-tools-1.60/debian/copyright
-@@ -0,0 +1,18 @@
-+This debian package is maintained by Bernd Eckenfels <ecki@debian.org> since 
-+Mon, 14 Aug 2000 02:42:13 +0200. Debian Informations will be uploaded
-+upstream, too.
-+
-+This package was debianized by Anthony Towns <ajt@debian.org> on
-+Mon, 17 Jul 2000 07:34:12 +1000. It was originally part of the netbase
-+package.
-+
-+It was downloaded from http://www.tazenda.demon.co.uk/phil/net-tools/
-+
-+Upstream Authors: Phil Blundell <philb@gnu.org>, 
-+                  Bernd Eckenfels <net-tools@lina.inka.de>
-+
-+Copyright:
-+
-+Distributed under the terms of the GNU General Public License version 2,
-+as published by the Free Software Foundation. On Debian systems you can
-+find a copy of this license in /usr/share/common-licenses/GPL.
---- net-tools-1.60.orig/debian/dirs
-+++ net-tools-1.60/debian/dirs
-@@ -0,0 +1 @@
-+usr/sbin
---- net-tools-1.60.orig/debian/config.make
-+++ net-tools-1.60/debian/config.make
-@@ -0,0 +1,36 @@
-+I18N=1
-+HAVE_AFUNIX=1
-+HAVE_AFINET=1
-+HAVE_AFINET6=1
-+HAVE_AFIPX=1
-+HAVE_AFATALK=1
-+HAVE_AFAX25=1
-+HAVE_AFNETROM=1
-+HAVE_AFROSE=1
-+HAVE_AFX25=1
-+HAVE_AFECONET=1
-+HAVE_AFDECnet=1
-+HAVE_AFASH=1
-+HAVE_HWETHER=1
-+HAVE_HWARC=1
-+HAVE_HWSLIP=1
-+HAVE_HWPPP=1
-+HAVE_HWTUNNEL=1
-+HAVE_HWSTRIP=1
-+HAVE_HWTR=1
-+HAVE_HWAX25=1
-+HAVE_HWROSE=1
-+HAVE_HWNETROM=1
-+HAVE_HWX25=1
-+HAVE_HWFR=1
-+HAVE_HWSIT=1
-+HAVE_HWFDDI=1
-+HAVE_HWHIPPI=1
-+HAVE_HWASH=1
-+HAVE_HWHDLCLAPB=1
-+HAVE_HWIRDA=1
-+HAVE_HWEC=1
-+HAVE_EUI64=1
-+HAVE_FW_MASQUERADE=1
-+HAVE_IP_TOOLS=1
-+HAVE_MII=1
---- net-tools-1.60.orig/debian/control
-+++ net-tools-1.60/debian/control
-@@ -0,0 +1,21 @@
-+Source: net-tools
-+Section: net
-+Priority: important
-+Build-Depends: debhelper, gettext
-+Maintainer: Bernd Eckenfels <ecki@debian.org>
-+Standards-Version: 3.6.1
-+
-+Package: net-tools
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Replaces: netbase (<< 4.00), ja-trans (<= 0.8-2)
-+Conflicts: ja-trans (<= 0.8-2)
-+Description: The NET-3 networking toolkit
-+ This package includes the important tools for controlling the network
-+ subsystem of the Linux kernel.  This includes arp, ifconfig, netstat, 
-+ rarp, nameif and route.  Additionally, this package contains utilities
-+ relating to particular network hardware types (plipconfig, slattach, 
-+ mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
-+ .
-+ In the upstream package 'hostname' and friends are included. Those are
-+ not installed by this package, since there is a special "hostname*.deb".
---- net-tools-1.60.orig/debian/rules
-+++ net-tools-1.60/debian/rules
-@@ -0,0 +1,74 @@
-+#!/usr/bin/make -f
-+# Sample debian/rules that uses debhelper.
-+# GNU copyright 1997 to 1999 by Joey Hess.
-+
-+# Uncomment this to turn on verbose mode.
-+#export DH_VERBOSE=1
-+
-+# This is the debhelper compatability version to use.
-+export DH_COMPAT=1
-+
-+configure: configure-stamp
-+configure-stamp:
-+	dh_testdir
-+	touch configure-stamp
-+
-+build: configure-stamp build-stamp
-+build-stamp:
-+	dh_testdir
-+	cp debian/config.h config.h
-+	cp debian/config.make config.make
-+	$(MAKE)
-+	touch build-stamp
-+
-+clean:
-+	dh_testdir
-+	dh_testroot
-+	rm -f build-stamp configure-stamp
-+	-$(MAKE) clobber
-+	dh_clean
-+
-+install: build
-+	dh_testdir
-+	dh_testroot
-+	dh_clean -k
-+	dh_installdirs
-+	$(MAKE) update BASEDIR=`pwd`/debian/tmp
-+	mv debian/tmp/sbin/arp debian/tmp/usr/sbin/arp
-+	# we don't want man pages for domainname and friends... (yet)
-+	rm -rf debian/tmp/usr/share/man/*/man1/ debian/tmp/usr/share/man/man1/
-+	# we don't install local manpages until policy is clear
-+	rm -rf debian/tmp/usr/share/man/*_*/
-+
-+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+# We have nothing to do by default.
-+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+#	dh_testversion
-+	dh_testdir
-+	dh_testroot
-+#	dh_installdebconf	
-+	dh_installdocs
-+	dh_installexamples
-+	dh_installmenu
-+	dh_installcron
-+#	dh_installmanpages
-+	dh_installinfo
-+#	dh_undocumented
-+	dh_installchangelogs 
-+	dh_link
-+	dh_strip
-+	dh_compress
-+	dh_fixperms
-+#	dh_makeshlibs
-+	dh_installdeb
-+	dh_shlibdeps
-+	dh_gencontrol -- -isp
-+	dh_md5sums
-+	dh_builddeb
-+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install
---- net-tools-1.60.orig/debian/config.h
-+++ net-tools-1.60/debian/config.h
-@@ -0,0 +1,75 @@
-+/*
-+* config.h	Automatically generated configuration includefile
-+*
-+* NET-TOOLS	A collection of programs that form the base set of the
-+*		NET-3 Networking Distribution for the LINUX operating
-+*		system.
-+*
-+*		DO  NOT  EDIT  DIRECTLY
-+*
-+*/
-+
-+/* 
-+ * 
-+ * Internationalization
-+ * 
-+ * The net-tools package has currently been translated to French,
-+ * German and Brazilian Portugese.  Other translations are, of
-+ * course, welcome.  Answer `n' here if you have no support for
-+ * internationalization on your system.
-+ * 
-+ */
-+#define I18N 1
-+
-+/* 
-+ * 
-+ * Protocol Families.
-+ * 
-+ */
-+#define HAVE_AFUNIX 1
-+#define HAVE_AFINET 1
-+#define HAVE_AFINET6 1
-+#define HAVE_AFIPX 1
-+#define HAVE_AFATALK 1
-+#define HAVE_AFAX25 1
-+#define HAVE_AFNETROM 1
-+#define HAVE_AFROSE 1
-+#define HAVE_AFX25 1
-+#define HAVE_AFECONET 1
-+#define HAVE_AFDECnet 1
-+#define HAVE_AFASH 1
-+
-+/* 
-+ * 
-+ * Device Hardware types.
-+ * 
-+ */
-+#define HAVE_HWETHER 1
-+#define HAVE_HWARC 1
-+#define HAVE_HWSLIP 1
-+#define HAVE_HWPPP 1
-+#define HAVE_HWTUNNEL 1
-+#define HAVE_HWSTRIP 1
-+#define HAVE_HWTR 1
-+#define HAVE_HWAX25 1
-+#define HAVE_HWROSE 1
-+#define HAVE_HWNETROM 1
-+#define HAVE_HWX25 1
-+#define HAVE_HWFR 1
-+#define HAVE_HWSIT 1
-+#define HAVE_HWFDDI 1
-+#define HAVE_HWHIPPI 1
-+#define HAVE_HWASH 1
-+#define HAVE_HWHDLCLAPB 1
-+#define HAVE_HWIRDA 1
-+#define HAVE_HWEC 1
-+#define HAVE_HWEUI64 1
-+
-+/* 
-+ * 
-+ * Other Features.
-+ * 
-+ */
-+#define HAVE_FW_MASQUERADE 1
-+#define HAVE_IP_TOOLS 1
-+#define HAVE_MII 1
---- net-tools-1.60.orig/debian/docs
-+++ net-tools-1.60/debian/docs
-@@ -0,0 +1,3 @@
-+README
-+README.ipv6
-+TODO
diff --git a/source/a/util-linux/util-linux.SlackBuild b/source/a/util-linux/util-linux.SlackBuild
index 42419914..1fa74c83 100755
--- a/source/a/util-linux/util-linux.SlackBuild
+++ b/source/a/util-linux/util-linux.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,9 +23,9 @@
 # Slackware build script for util-linux
 
 VERSION=${VERSION:-$(echo util-linux*.tar.?z* | cut -d - -f 3  | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-5}
 
-ADJTIMEXVERS=1.23
+ADJTIMEXVERS=1.29
 SETSERIALVERS=2.17
 ZIPTOOLVERS=1.4.0
 
@@ -70,8 +70,7 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# Disabled login and init stuff from being built, as this is provided by 
-# shadow and sysvinit
+# Disabled login stuff from being built, as this is provided by shadow
 #
 # /sbin/elvtune is not built, as configure says it only works with 2.2 and 
 #   2.4 kernels
@@ -85,7 +84,19 @@ find . \
 # Changing the fdisk -l output (this was done prior to util-linux-ng) broke
 # our installation scripts, so we have changed the name of partition type
 # 83 back to "Linux swap":
-zcat $CWD/util-linux.fdisk-no-solaris.diff.gz | patch -p1 || exit 1
+zcat $CWD/util-linux.fdisk-no-solaris.diff.gz | patch -p1 --verbose || exit 1
+
+# Fix loop encryption:
+zcat $CWD/0001-mount-old-fix-encryption-usage.patch.gz | patch -p1 --verbose || exit 1
+
+# Fix fdisk granularity on 512 byte sector size devices:
+zcat $CWD/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch.gz | patch -p1 --verbose || exit 1
+
+# 20120814 bkw: fix "column --separator <anything>" segfault
+zcat $CWD/column-fix_long_opts.diff.gz | patch -p1 --verbose || exit 1
+
+# Regenerate, since patch 0001 hits mount/Makefile.am:
+./autogen.sh
 
 CFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -99,9 +110,9 @@ CFLAGS="$SLKCFLAGS" \
   --disable-static \
   --enable-arch \
   --enable-agetty \
-  --disable-init \
   --enable-kill \
   --disable-last \
+  --enable-line \
   --enable-mesg \
   --enable-partx \
   --enable-raw \
@@ -114,8 +125,10 @@ CFLAGS="$SLKCFLAGS" \
   --enable-use-tty-group \
   --enable-libblkid \
   --enable-libmount \
+  --enable-libmount-mount \
   --enable-libuuid \
   --disable-uuidd \
+  --enable-ddate \
   --build=$ARCH-slackware-linux \
   || exit 1
 
@@ -180,11 +193,10 @@ cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings.1.gz
 # Add just the hostname utilities from net-tools, so that anyone
 # installing just the A series will not have a hostname (null):
 cd $TMP || exit 1
-rm -rf net-tools-1.60
-tar xvf $CWD/net-tools-1.60.tar.xz
-cd net-tools-1.60
-zcat $CWD/net-tools_1.60-19.diff.gz | patch -p1 || exit
-zcat $CWD/net-tools.diff.gz | patch -p1 || exit
+rm -rf net-tools-1.60.20120726git
+tar xvf $CWD/net-tools-1.60.20120726git.tar.xz
+cd net-tools-1.60.20120726git
+zcat $CWD/net-tools.config.h.gz > config.h
 make
 make hostname
 strip hostname
@@ -209,7 +221,7 @@ rm -rf adjtimex-$ADJTIMEXVERS
 tar xvf $CWD/adjtimex_${ADJTIMEXVERS}.orig.tar.gz || exit 1
 cd adjtimex-$ADJTIMEXVERS || exit 1
 chown -R root:root .
-zcat $CWD/adjtimex_1.23-1.diff.gz | patch -p1 || exit 1
+zcat $CWD/adjtimex_1.29-2.2.diff.gz | patch -p1 || exit 1
 CFLAGS=-O2 ./configure --prefix=/usr || exit 1
 make || exit 1
 strip adjtimex
diff --git a/source/a/xfsprogs/xfsprogs.SlackBuild b/source/a/xfsprogs/xfsprogs.SlackBuild
index 27af8245..672290d3 100755
--- a/source/a/xfsprogs/xfsprogs.SlackBuild
+++ b/source/a/xfsprogs/xfsprogs.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
diff --git a/source/a/xz/slack-desc b/source/a/xz/slack-desc
index af549b35..05379225 100644
--- a/source/a/xz/slack-desc
+++ b/source/a/xz/slack-desc
@@ -8,7 +8,7 @@
   |-----handy-ruler------------------------------------------------------|
 xz: xz (compression utility based on the LZMA algorithm)
 xz:
-xz: LZMA is a general purporse compression algorithm designed by Igor
+xz: LZMA is a general purpose compression algorithm designed by Igor
 xz: Pavlov as part of 7-Zip.  It provides high compression ratio while
 xz: keeping the decompression speed fast.  XZ Utils are an attempt to make
 xz: LZMA compression easy to use on free (as in freedom) operating
diff --git a/source/a/xz/xz.SlackBuild b/source/a/xz/xz.SlackBuild
index dd996f48..7c60ce6c 100755
--- a/source/a/xz/xz.SlackBuild
+++ b/source/a/xz/xz.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 #   Permission to use, copy, modify, and distribute this software for
@@ -154,3 +154,10 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz
 
+# Move temporary stuff to /tmp, so that it won't get forgotten
+# in the shuffle:
+
+cp -a $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz /tmp
+rm -rf /tmp/xz-tmp*
+mv /xz-tmp* /tmp
+
diff --git a/source/ap/alsa-utils/alsa-utils.SlackBuild b/source/ap/alsa-utils/alsa-utils.SlackBuild
index 77664487..3e642d08 100755
--- a/source/ap/alsa-utils/alsa-utils.SlackBuild
+++ b/source/ap/alsa-utils/alsa-utils.SlackBuild
@@ -63,7 +63,7 @@ cd $TMP
 rm -rf alsa-utils-$VERSION
 tar xvf $CWD/alsa-utils-$VERSION.tar.?z* || exit 1
 cd alsa-utils-$VERSION || exit 1
-zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit
+#zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit
 
 chown -R root:root .
 find . \
@@ -78,6 +78,7 @@ CFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
   --sysconfdir=/etc \
+  --disable-alsaconf \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
diff --git a/source/ap/cdrdao/cdrdao-1.2.3-stat.patch b/source/ap/cdrdao/cdrdao-1.2.3-stat.patch
new file mode 100644
index 00000000..5a68e713
--- /dev/null
+++ b/source/ap/cdrdao/cdrdao-1.2.3-stat.patch
@@ -0,0 +1,13 @@
+diff -up cdrdao-1.2.3/dao/ScsiIf-linux.cc.stat cdrdao-1.2.3/dao/ScsiIf-linux.cc
+--- cdrdao-1.2.3/dao/ScsiIf-linux.cc.stat	2010-01-20 20:11:36.000000000 +0100
++++ cdrdao-1.2.3/dao/ScsiIf-linux.cc	2010-01-20 20:14:07.000000000 +0100
+@@ -19,6 +19,9 @@
+ 
+ #include <config.h>
+ 
++#include <sys/types.h>
++#include <sys/stat.h>
++
+ #include <stdio.h>
+ #include <fcntl.h>
+ #include <unistd.h>
diff --git a/source/ap/cdrdao/cdrdao.SlackBuild b/source/ap/cdrdao/cdrdao.SlackBuild
index 95216d51..fe3c5b7d 100755
--- a/source/ap/cdrdao/cdrdao.SlackBuild
+++ b/source/ap/cdrdao/cdrdao.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=1.2.3
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -61,6 +61,9 @@ cd $TMP
 rm -rf cdrdao-$VERSION
 tar xvf $CWD/cdrdao-$VERSION.tar.?z* || exit 1
 cd cdrdao-$VERSION
+
+zcat $CWD/cdrdao-1.2.3-stat.patch.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/ap/diffutils/diffutils.SlackBuild b/source/ap/diffutils/diffutils.SlackBuild
index f338b71d..2287abb2 100755
--- a/source/ap/diffutils/diffutils.SlackBuild
+++ b/source/ap/diffutils/diffutils.SlackBuild
@@ -22,7 +22,7 @@
 
 
 PKGNAM=diffutils
-VERSION=3.0
+VERSION=${VERSION:-$(echo diffutils-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/ap/dmapi/slack-desc b/source/ap/dmapi/slack-desc
index c5acf491..9cbfcfa9 100644
--- a/source/ap/dmapi/slack-desc
+++ b/source/ap/dmapi/slack-desc
@@ -10,7 +10,7 @@ dmapi: dmapi (Data Management API library)
 dmapi:
 dmapi: A library required to use the Data Management API (DMAPI).
 dmapi: This interface is defined in the X/Open document 'Systems Management:
-dmapi: Data Storage Managment (XDSM) API' dated February 1997.
+dmapi: Data Storage Management (XDSM) API' dated February 1997.
 dmapi:
 dmapi: The DMAPI library is used by the xfsdump utility.
 dmapi:
diff --git a/source/ap/ghostscript/ghostscript.SlackBuild b/source/ap/ghostscript/ghostscript.SlackBuild
index ff9fac9e..4afef964 100755
--- a/source/ap/ghostscript/ghostscript.SlackBuild
+++ b/source/ap/ghostscript/ghostscript.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=ghostscript
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -60,10 +60,7 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1
 cd ${PKGNAM}-$VERSION
 
-# Bugfix:
-zcat $CWD/ghostscript.rev11948.diff.gz | patch -p1 --verbose || exit 1
-
-## Regenerate ./configure:
+## Regenerate ./configure (if patched):
 #sh autogen.sh
 
 # Make sure ownerships and permissions are sane:
@@ -104,6 +101,8 @@ CFLAGS="$SLKCFLAGS" \
   --with-ijs \
   --disable-compile-inits \
   --enable-dynamic \
+  --enable-cups \
+  --with-install-cups \
   --enable-cairo=no \
   --program-prefix= \
   --program-suffix= \
@@ -124,6 +123,13 @@ if [ -r $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap ]; then
   zcat $CWD/cidfmap.gz > $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.new
 fi
 
+# Many programs expect to find this filter with the old name:
+( cd $PKG/usr/lib${LIBDIRSUFFIX}/cups/filter
+  if [ ! -e pstoraster ]; then
+    ln -sf gstoraster pstoraster
+  fi
+)
+
 # Strip binaries:
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
@@ -164,6 +170,17 @@ mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
   ln -sf /usr/share/ghostscript/$VERSION/doc doc
 )
 
+# Version 9.02 fails to install History9.htm, but also the full unabridged
+# history of Ghostscript is not required here.  See the source for that.
+( cd doc
+  cp -a \
+    History*.htm \
+    $PKG/usr/share/ghostscript/$VERSION/doc
+  rm -f $PKG/usr/share/ghostscript/$VERSION/doc/History{1,2,3,4,5,6,7,8}.htm
+  chown root:root $PKG/usr/share/ghostscript/$VERSION/doc/History*htm
+  chmod 644 $PKG/usr/share/ghostscript/$VERSION/doc/History*htm
+)
+
 cd $TMP
 cp -a ${PKGNAM}-${VERSION}/examples/cjk $PKG/usr/share/ghostscript/${VERSION}/examples/
 
diff --git a/source/ap/ghostscript/ghostscript.rev11948.diff b/source/ap/ghostscript/ghostscript.rev11948.diff
deleted file mode 100644
index cc45c154..00000000
--- a/source/ap/ghostscript/ghostscript.rev11948.diff
+++ /dev/null
@@ -1,13 +0,0 @@
---- ./base/gximag3x.c.orig	2010-08-10 11:20:19.000000000 -0500
-+++ ./base/gximag3x.c	2010-12-28 13:24:54.000000000 -0600
-@@ -241,7 +241,9 @@
- 	    const gs_image3x_mask_t *pixm =
- 		(i == 0 ? &pim->Opacity : &pim->Shape);
- 
--	    *(gs_data_image_t *)&mask[i].image = pixm->MaskDict;
-+            /* Use memcpy because direct assignment breaks ANSI aliasing */
-+            /* rules and causes SEGV with gcc 4.5.1 */
-+            memcpy(&mask[i].image, &pixm->MaskDict, sizeof(pixm->MaskDict));
- 	    mask[i].image.type = type1;
- 	    mask[i].image.BitsPerComponent = pixm->MaskDict.BitsPerComponent;
- 	}
diff --git a/source/ap/htop/htop.SlackBuild b/source/ap/htop/htop.SlackBuild
new file mode 100755
index 00000000..b27481e9
--- /dev/null
+++ b/source/ap/htop/htop.SlackBuild
@@ -0,0 +1,122 @@
+#!/bin/sh
+
+# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=htop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Install documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/ap/htop/slack-desc b/source/ap/htop/slack-desc
new file mode 100644
index 00000000..039b7195
--- /dev/null
+++ b/source/ap/htop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+htop: htop (ncurses-based interactive process viewer)
+htop:
+htop: htop is a free (GPL) ncurses-based process viewer that is similar to
+htop: the well-known "top" program, but allows to scroll the list vertically
+htop: and horizontally to see all processes and their full command lines.
+htop: Tasks related to processes (killing, renicing) can be done without
+htop: entering their PIDs.
+htop:
+htop: htop is developed by Hisham Muhammad.
+htop: Homepage:  http://htop.sf.net
+htop:
diff --git a/source/ap/linuxdoc-tools/ChangeLog.txt b/source/ap/linuxdoc-tools/ChangeLog.txt
index 16d8783f..0c971b35 100644
--- a/source/ap/linuxdoc-tools/ChangeLog.txt
+++ b/source/ap/linuxdoc-tools/ChangeLog.txt
@@ -1,3 +1,28 @@
+Fri Jun 29 17:34:25 BST 2012
+ Stuart Winter <mozes@slackware.com>
+ linuxdoc-tools 0.9.67, build 2.
+  * Made a compatibility symlink between 
+   /usr/share/xml/docbook/stylesheet/docbook-xsl -> /usr/share/xml/docbook/xsl-stylesheets-<ver>
+  Thanks to Patrick Verner for the suggestion.
+
+Mon May 28 21:40:41 BST 2012
+ Stuart Winter <mozes@slackware.com>
+ linuxdoc-tools 0.9.67, build 1
+  * Removed the files that were overlapping with the 'Python' (and any other) package.
+  * Upgraded to linuxdoc-tools 0.9.67
+  * Upgraded to gnome-doc-utils 0.20.10
+  * Upgraded to xmlto-0.0.25
+  * Upgraded to gtk-doc-1.18
+  * Upgraded to AsciiDoc-8.6.7
+  * Upgraded to DocBook XSL Stylesheets 1.76.1
+  * Fix OpenJade FTBFS with Perl 5.16 installed: Copy the perl4 corelib 'getopts.pl'
+    into OpenJade's build directory as a build-time work-around.
+
+Sun May 15 03:42:16 UTC 2011
+ Patrick Volkerding <volkerdi@slackware.com>
+ linuxdoc-tools 0.9.66, build 9
+ Rebuild for perl-5.14.0.
+
 Mon Mar 21 17:39:48 UTC 2011
  Patrick Volkerding <volkerdi@slackware.com>
  linuxdoc-tools 0.9.66, build 8
diff --git a/source/ap/linuxdoc-tools/arm/build b/source/ap/linuxdoc-tools/arm/build
index eb4f18c8..f5a418d9 100755
--- a/source/ap/linuxdoc-tools/arm/build
+++ b/source/ap/linuxdoc-tools/arm/build
@@ -9,9 +9,9 @@ source /usr/share/slackdev/buildkit.sh
 
 # Package metadata:
 export PKGNAM=linuxdoc-tools
-export VERSION=${VERSION:-0.9.66}
+export VERSION=${VERSION:-0.9.67}
 export PKGARCH=${PKGARCH:-arm}
-export BUILD=${BUILD:-4}
+export BUILD=${BUILD:-2}
 export PKGSERIES=${PKGSERIES:-ap}
 export SLACKPACKAGE=$PKGNAM-$VERSION-$PKGARCH-$BUILD.tgz
 export PKGEXT=${PKGEXT:-tgz}
diff --git a/source/ap/linuxdoc-tools/linuxdoc-tools.build b/source/ap/linuxdoc-tools/linuxdoc-tools.build
index fe3506cc..27f3a53c 100755
--- a/source/ap/linuxdoc-tools/linuxdoc-tools.build
+++ b/source/ap/linuxdoc-tools/linuxdoc-tools.build
@@ -20,21 +20,21 @@ LINUXDOCTOOLSVER=$PKGVERSION
 SGMLDTD3VER=3.1
 SGMLDTD4VER=4.5
 XMLDTDVER=4.5
-XSLSTYLESHEETSVER=1.75.2
+XSLSTYLESHEETSVER=1.76.1
 DSSSLSTYLESHEETSVER=1.79
 SGMLCOMMONVER=0.6.3
 OPENJADEVER=1.3.3-pre1
 OPENSPVER=1.5.2
-GNOMEDOCUTILSVER=0.20.4
-GTKDOCVER=1.15
+GNOMEDOCUTILSVER=0.20.10
+GTKDOCVER=1.18
 SGMLSPLVER=1.03ii
-XMLTOVER=0.0.23
-ASCIIDOCVER=8.6.2
+XMLTOVER=0.0.25
+ASCIIDOCVER=8.6.7
 DOCBOOKUTILSVER=0.6.14
 
 # Determine the general CFLAGS for the known architectures:
 case $ARCH in
-  arm)     export SLKCFLAGS="-O2 -march=armv4t"
+  arm)     export SLKCFLAGS="-O2 -march=armv5te"
            export LIBDIRSUFFIX=""
            export HOSTTARGET="-gnueabi"
            ;;
@@ -71,7 +71,7 @@ find . \
   -exec chmod 644 {} \;
 
 # Revert a change that breaks processing the git documentation:
-xz -dc $CWD/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff.xz | patch --verbose -p1 || exit 1
+# xz -dc $CWD/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff.xz | patch --verbose -p1 || exit 1
 
 # Configure:
 ./configure \
@@ -356,6 +356,15 @@ find . \
 # Apply patches:
 sed -i "s/iostream.h/iostream/g" style/MultiLineInlineNote.cxx
 
+# GCC 4.6 patch:
+xz -dc $CWD/sources/openjade-1.3.2-gcc46.patch.xz | patch --verbose -p1 || exit 1
+
+# Install the old Perl 4 'getopts' function.  This has been deprecated in Perl 5.16
+# and since it seems that OpenJade isn't being actively released by upstream, we'll
+# work around by supplying it to OpenJade directly.  It's only a build-time fix anyway
+# so it's ok to have a dirty work-around:
+xz -dc $CWD/sources/openjade-1.3-getopts.pl.xz > getopts.pl
+
 # Configure without optimisation.
 # OpenSP & OpenJade are sensitive to optimisations and can result
 # in segfaults with anything other than O2 - particularly on the ARM
@@ -374,8 +383,8 @@ sed -i "s/iostream.h/iostream/g" style/MultiLineInlineNote.cxx
   --datadir=/usr/share/sgml/openjade-$OPENJADEVER \
   || exit 1
 
-# Build:
-make || exit 1
+# Build (setting the perl library to be the PWD so it finds the old 'getopts.pl'):
+make PERL5LIB=$PWD || exit 1
 
 # Install:
 mkdir -p /etc/sgml
@@ -689,6 +698,7 @@ find . \
 
 # Apply patches:
 for i in \
+  docbook-xsl-mandir.patch \
   docbook-xsl-list-item-body.patch \
   docbook-xsl-marginleft.patch \
   docbook-xsl-newmethods.patch \
@@ -704,6 +714,12 @@ cp -fav \
  htmlhelp images javahelp lib manpages params profiling \
  slides template tools website wordml xhtml             \
  /usr/share/xml/docbook/xsl-stylesheets-$XSLSTYLESHEETSVER
+# Some Linux distributions have this here, so we install a compatibility symlink:
+# (this convoluted way of doing it is for makepkg's benefit)
+mkdir -vpm755 /usr/share/xml/docbook/stylesheet
+( cd /usr/share/xml/docbook/stylesheet
+  rm -fv docbook-xsl
+  ln -vfs ../xsl-stylesheets-$XSLSTYLESHEETSVER docbook-xsl )
 
 # Create config files:
 if [ ! -d /etc/xml ]; then install -v -m755 -d /etc/xml; fi
@@ -742,9 +758,9 @@ cp -fav doc/* README* RELEASE-NOTES* NEWS* \
 # Extract source:
 cd $TMP
 mkdir xmlto && cd xmlto
-#tar xvf $CWD/sources/xmlto-$XMLTOVER.tar.*z*
-rpm2cpio $CWD/sources/xmlto-${XMLTOVER}*.src.rpm | cpio -div || exit 1
-tar xvvf xmlto-$XMLTOVER.tar.*z*
+tar xvf $CWD/sources/xmlto-$XMLTOVER.tar.*z*
+#rpm2cpio $CWD/sources/xmlto-${XMLTOVER}*.src.rpm | cpio -div || exit 1
+#tar xvvf xmlto-$XMLTOVER.tar.*z*
 cd xmlto-$XMLTOVER || exit 1
 chown -R root:root .
 find . \
@@ -753,9 +769,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Apply patches:
-patch --verbose -p1 < ../xmlto-0.0.23-Lchapterpassivetex.patch || exit 1
-
 # Configure:
 ./configure \
   --prefix=/usr \
@@ -942,13 +955,9 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Apply patch to fix problem with vim:
-xz -dc $CWD/sources/gtk-doc.patch.xz | patch --verbose -p1 || exit 1
-
 # Configure:
 ./configure \
   --prefix=/usr \
-  --enable-public-id \
   --disable-scrollkeeper \
   || exit 1
 
diff --git a/source/ap/linuxdoc-tools/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff b/source/ap/linuxdoc-tools/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff
deleted file mode 100644
index 2bdc7de4..00000000
--- a/source/ap/linuxdoc-tools/sources/asciidoc.asciidoc7compatible.revertbrokenchange.diff
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/asciidoc.py       2010-10-17 14:01:35.000000000 +0800
-+++ b/asciidoc.py       2010-10-17 14:11:07.000000000 +0800
-@@ -4260,10 +4260,12 @@
-         self.include1 = {}      # Holds include1::[] files for {include1:}.
-         self.dumping = False    # True if asciidoc -c option specified.
-
--    def load_file(self,fname,dir=None):
-+    def load_file(self, fname, dir=None, include=[]):
-         """
-         Loads sections dictionary with sections from file fname.
-         Existing sections are overlaid.
-+        The 'include' list contains the section names to be loaded,
-+        if 'inlude' is not specified all sections are loaded.
-         Return False if no file was found in any of the locations.
-         """
-         if dir:
-@@ -4317,9 +4319,14 @@
-             else:
-                 sections[section] = contents
-         rdr.close()
-+        if include:
-+            for s in set(sections) - set(include):
-+                del sections[s]
-         attrs = {}
-         self.load_sections(sections,attrs)
--        self.loaded.append(os.path.realpath(fname))
-+        if not include:
-+            # If all sections are loaded mark this file as loaded.
-+            self.loaded.append(os.path.realpath(fname))
-         document.update_attributes(attrs) # So they are available immediately.
-         return True
-
-@@ -5314,13 +5321,17 @@
-             if o == '-c': config.dumping = True
-             if o == '-s': config.header_footer = False
-             if o == '-v': config.verbose = True
--        # Check the infile exists.
--        if infile != '<stdin>' and not os.path.isfile(infile):
--            raise EAsciiDoc,'input file %s missing' % infile
--        document.infile = infile
-         # Load asciidoc.conf files.
-         if not config.load_from_dirs('asciidoc.conf'):
-             raise EAsciiDoc,'configuration file asciidoc.conf missing'
-+        # Check the infile exists.
-+        if infile != '<stdin>':
-+            if not os.path.isfile(infile):
-+                raise EAsciiDoc,'input file %s missing' % infile
-+            indir = os.path.dirname(infile)
-+            config.load_file('asciidoc.conf', indir,
-+                            ['attributes','titles','specialchars'])
-+        document.infile = infile
-         AttributeList.initialize()
-         # Open input file and parse document header.
-         reader.tabsize = config.tabsize
-@@ -5343,10 +5354,9 @@
-             document.load_lang()
-         # Load local conf files (conf files in the input file directory).
-         if infile != '<stdin>':
--            d =os.path.dirname(infile)
--            config.load_from_dirs('asciidoc.conf', [d])
--            config.load_backend([d])
--            config.load_filters([d])
-+            config.load_file('asciidoc.conf', indir)
-+            config.load_backend([indir])
-+            config.load_filters([indir])
-             # Load document specific configuration files.
-             f = os.path.splitext(infile)[0]
-             config.load_file(f + '.conf')
---- a/doc/asciidoc.txt  2010-10-17 14:11:34.000000000 +0800
-+++ b/doc/asciidoc.txt  2010-10-17 14:13:21.000000000 +0800
-@@ -3632,6 +3632,8 @@
- the following order:
-
- - `asciidoc.conf` from locations 1, 2, 3.
-+- 'attributes', 'titles' and 'specialcharacters' sections from the
-+  `asciidoc.conf` in location 4.
- - The document header is parsed at this point.
- - `<backend>.conf` and `<backend>-<doctype>.conf` from locations 1,
-   2,3.
-
diff --git a/source/ap/linuxdoc-tools/sources/gtk-doc.patch b/source/ap/linuxdoc-tools/sources/gtk-doc.patch
deleted file mode 100644
index bf32d557..00000000
--- a/source/ap/linuxdoc-tools/sources/gtk-doc.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 2bffebcf9c125f5610b8fb660d42c3c5b9dfd4f0 Mon Sep 17 00:00:00 2001
-From: Stefan Kost <ensonic@users.sf.net>
-Date: Thu, 19 Aug 2010 14:45:54 +0000
-Subject: fixxref: tweak the vim invocation
-
-Use specific output-filename to ensure we get what we'll late use. Use "-u NONE"
-instead of -u /dev/null.
-Fixes #627223
----
-diff --git a/gtkdoc-fixxref.in b/gtkdoc-fixxref.in
-index 33a31b8..9f53852 100755
---- a/gtkdoc-fixxref.in
-+++ b/gtkdoc-fixxref.in
-@@ -464,7 +464,7 @@ sub HighlightSourceVim {
-     close (NEWFILE);
- 
-     # format source
--    system "echo 'let html_number_lines=0|let html_use_css=1|let use_xhtml=1|syn on|e $temp_source_file|run! syntax/2html.vim|wa!|qa!' | @HIGHLIGHT@ -n -e -u /dev/null -T xterm >/dev/null";
-+    system "echo 'let html_number_lines=0|let html_use_css=1|let use_xhtml=1|syn on|e $temp_source_file|run! syntax/2html.vim|w! $temp_source_file.html|qa!' | @HIGHLIGHT@ -n -e -u NONE -T xterm >/dev/null";
- 
-     my $highlighted_source;
-     {
---
-cgit v0.8.3.1
-
diff --git a/source/ap/linuxdoc-tools/sources/openjade-1.3-getopts.pl b/source/ap/linuxdoc-tools/sources/openjade-1.3-getopts.pl
new file mode 100644
index 00000000..5b18fe00
--- /dev/null
+++ b/source/ap/linuxdoc-tools/sources/openjade-1.3-getopts.pl
@@ -0,0 +1,65 @@
+;# getopts.pl - a better getopt.pl
+#
+# This library is no longer being maintained, and is included for backward
+# compatibility with Perl 4 programs which may require it.
+#
+# In particular, this should not be used as an example of modern Perl
+# programming techniques.
+#
+# Suggested alternatives: Getopt::Long  or  Getopt::Std
+#
+;# Usage:
+;#      do Getopts('a:bc');  # -a takes arg. -b & -c not. Sets opt_* as a
+;#                           #  side effect.
+
+sub Getopts {
+    local($argumentative) = @_;
+    local(@args,$_,$first,$rest);
+    local($errs) = 0;
+
+    @args = split( / */, $argumentative );
+    while(@ARGV && ($_ = $ARGV[0]) =~ /^-(.)(.*)/) {
+		($first,$rest) = ($1,$2);
+		$pos = index($argumentative,$first);
+		if($pos >= 0) {
+			if($args[$pos+1] eq ':') {
+				shift(@ARGV);
+				if($rest eq '') {
+					++$errs unless(@ARGV);
+					$rest = shift(@ARGV);
+				}
+				eval "
+				push(\@opt_$first, \$rest);
+				if (!defined \$opt_$first or \$opt_$first eq '') {
+					\$opt_$first = \$rest;
+				}
+				else {
+					\$opt_$first .= ' ' . \$rest;
+				}
+				";
+			}
+			else {
+				eval "\$opt_$first = 1";
+				if($rest eq '') {
+					shift(@ARGV);
+				}
+				else {
+					$ARGV[0] = "-$rest";
+				}
+			}
+		}
+		else {
+			print STDERR "Unknown option: $first\n";
+			++$errs;
+			if($rest ne '') {
+				$ARGV[0] = "-$rest";
+			}
+			else {
+				shift(@ARGV);
+			}
+		}
+	}
+    $errs == 0;
+}
+
+1;
diff --git a/source/ap/linuxdoc-tools/sources/openjade-1.3.2-gcc46.patch b/source/ap/linuxdoc-tools/sources/openjade-1.3.2-gcc46.patch
new file mode 100644
index 00000000..962ac19f
--- /dev/null
+++ b/source/ap/linuxdoc-tools/sources/openjade-1.3.2-gcc46.patch
@@ -0,0 +1,82 @@
+If a class or struct has no user-defined default constructor, C++ doesn't
+allow you to default construct a const instance of it.
+
+https://bugs.gentoo.org/358021
+http://clang.llvm.org/compatibility.html#default_init_const
+http://gcc.gnu.org/PR44499
+
+
+--- a/jade/TeXFOTBuilder.cxx
++++ b/jade/TeXFOTBuilder.cxx
+@@ -88,6 +88,8 @@ public:
+       value.convertString(nic_.placement);
+       }
+     ExtensionFlowObj *copy() const { return new PageFloatFlowObj(*this); }
++  public:
++    PageFloatFlowObj() {}
+   private:
+     PageFloatNIC nic_;
+     StringC name_;
+@@ -101,6 +103,8 @@ public:
+       fotb.endPageFootnote();
+     }
+     ExtensionFlowObj *copy() const { return new PageFootnoteFlowObj(*this); }
++  public:
++    PageFootnoteFlowObj() {}
+   private:
+   };
+   //////////////////////////////////////////////////////////////////////
+--- a/jade/TransformFOTBuilder.cxx
++++ b/jade/TransformFOTBuilder.cxx
+@@ -41,6 +41,7 @@ public:
+   };
+   class EntityRefFlowObj : public TransformExtensionFlowObj {
+   public:
++    EntityRefFlowObj() {}
+     void atomic(TransformFOTBuilder &fotb, const NodePtr &) const {
+       fotb.entityRef(name_);
+     }
+@@ -56,6 +57,7 @@ public:
+   };
+   class ProcessingInstructionFlowObj : public TransformExtensionFlowObj {
+   public:
++    ProcessingInstructionFlowObj() {}
+     void atomic(TransformFOTBuilder &fotb, const NodePtr &) const {
+       fotb.processingInstruction(data_);
+     }
+@@ -98,6 +100,8 @@ public:
+       }
+     }
+     ExtensionFlowObj *copy() const { return new EmptyElementFlowObj(*this); }
++  public:
++    EmptyElementFlowObj() {}
+   private:
+     ElementNIC nic_;
+   };
+@@ -133,6 +137,8 @@ public:
+       }
+     }
+     ExtensionFlowObj *copy() const { return new ElementFlowObj(*this); }
++  public:
++    ElementFlowObj() {}
+   private:
+     ElementNIC nic_;
+   };
+@@ -150,6 +156,8 @@ public:
+       value.convertString(systemId_);
+     }
+     ExtensionFlowObj *copy() const { return new EntityFlowObj(*this); }
++  public:
++    EntityFlowObj() {}
+   private:
+     StringC systemId_;
+   };
+@@ -174,6 +182,8 @@ public:
+       }
+     }
+     ExtensionFlowObj *copy() const { return new DocumentTypeFlowObj(*this); }
++  public:
++    DocumentTypeFlowObj() {}
+   private:
+     DocumentTypeNIC nic_;
+   };
diff --git a/source/ap/linuxdoc-tools/sources/source.download b/source/ap/linuxdoc-tools/sources/source.download
index 40e05d21..c9608b2b 100755
--- a/source/ap/linuxdoc-tools/sources/source.download
+++ b/source/ap/linuxdoc-tools/sources/source.download
@@ -7,24 +7,27 @@
 
 # linuxdoc-tools:
 # This provides things such as sgml2txt.
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/linuxdoc-tools-0.9.66-6.fc14.src.rpm
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/l/linuxdoc-tools-0.9.67-1.fc18.src.rpm
 
 # OpenSP:
 # http://openjade.sourceforge.net/download.html
 # wget -c http://kent.dl.sourceforge.net/sourceforge/openjade/OpenSP-1.5.2.tar.gz
 # 
-wget -c http://download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/opensp-1.5.2-12.fc12.src.rpm
-
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/o/opensp-1.5.2-14.fc17.src.rpm
 
 # OpenJade:
 # http://openjade.sourceforge.net/
+# We're using a gcc 4.6 patch from Fedora's SRPM: 
+#  ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/o/openjade-1.3.2-39.fc17.src.rpm
+# And we're using the old Perl 4 core libraries (as a dirty but effective build time work-around) taken from:
+# http://packages.debian.org/sid/libperl4-corelibs-perl
+# http://ftp.de.debian.org/debian/pool/main/libp/libperl4-corelibs-perl/libperl4-corelibs-perl_0.003.orig.tar.gz
 wget -c http://downloads.sourceforge.net/openjade/openjade-1.3.3-pre1.tar.gz
 
-
 # sgmltools-common.
 # It's broken and needs patching so we'll use Fedora's.
 #wget -c ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/sgml-common-0.6.3.tgz
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/sgml-common-0.6.3-33.fc14.src.rpm
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/s/sgml-common-0.6.3-36.fc17.src.rpm
 
 
 # DocBook docs:
@@ -34,8 +37,7 @@ wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/
 #wget -c http://www.docbook.org/sgml/4.5/docbook-4.5.zip
 # We use Debian's source because it's more convenient since they package all versions in one archive:
 wget -c http://ftp.de.debian.org/debian/pool/main/d/docbook/docbook_4.5.orig.tar.gz
-
-
+#
 # http://www.linuxfromscratch.org/blfs/view/stable/pst/docbook-dsssl.html
 # Check versions:
 # http://sourceforge.net/projects/docbook/files/
@@ -43,13 +45,13 @@ wget -c ftp://ftp.linux.ee/pub/gentoo/distfiles/distfiles/docbook-dsssl-1.79.tar
 wget -c http://switch.dl.sourceforge.net/sourceforge/docbook/docbook-dsssl-doc-1.79.tar.bz2
 # Why don't they put the patches into the distributed source...???
 #wget -c ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-0.6.14.tar.gz
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-utils-0.6.14-24.fc14.src.rpm
-
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/d/docbook-utils-0.6.14-30.fc17.src.rpm
+#
 #
 wget -c http://www.docbook.org/xml/4.5/docbook-xml-4.5.zip
 # https://sourceforge.net/project/showfiles.php?group_id=21935&package_id=16608
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-style-xsl-1.75.2-6.fc14.src.rpm
-
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/d/docbook-style-xsl-1.76.1-5.fc17.src.rpm
+#
 # We use the Fedora "docbook-style-xsl" SRPM for this rather than the original source which is why
 # these "docbook-xsl*" files aren't in our sources directory.
 #wget -c "http://downloads.sourceforge.net/project/docbook/docbook-xsl/1.75.2/docbook-xsl-1.75.2.tar.bz2?use_mirror=freefr"
@@ -61,13 +63,13 @@ wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/
 # I guess this mirror is out of date now.  It's easier to just look at Fedora's development
 # directory anyway :-)
 # wget -c http://ftp.acc.umu.se/pub/GNOME/sources/gnome-doc-utils/0.20/gnome-doc-utils-0.20.0.tar.bz2
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/gnome-doc-utils-0.20.1-1.fc14.src.rpm
+wget ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/g/gnome-doc-utils-0.20.10-2.fc18.src.rpm
 
 # gtk-doc:
 # When upgrading this, it's worth checking the Fedora SRPM.  For version 1.13
 # we're carrying a fix for gtk-doc-fixref.  Make sure newer versions don't need
 # any patches!
-wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.15/gtk-doc-1.15.tar.bz2
+wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.18/gtk-doc-1.18.tar.bz2
 # http://git.gnome.org/browse/gtk-doc/commit/?id=2bffebcf9c125f5610b8fb660d42c3c5b9dfd4f0
 
 # sgmlspl
@@ -76,14 +78,12 @@ wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.15/gtk-doc-1.15.tar.bz2
 wget -c http://ftp.debian.org/debian/pool/main/libs/libsgmls-perl/libsgmls-perl_1.03ii.orig.tar.gz
 wget -c http://ftp.de.debian.org/debian/pool/main/libs/libsgmls-perl/libsgmls-perl_1.03ii-32.diff.gz
 
-
 # xmlto
 # https://fedorahosted.org/releases/x/m/xmlto
 # wget -c --no-check-certificate https://fedorahosted.org/releases/x/m/xmlto/xmlto-0.0.23.tar.bz2
-# Fedora 14 includes a patch, so we'll take it:
-wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/xmlto-0.0.23-3.fc13.src.rpm
-
+# Fedora includes a patch, so we'll take it:
+wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/rawhide/source/SRPMS/x/xmlto-0.0.25-2.fc17.src.rpm
 
 # AsciiDoc
 # http://www.methods.co.nz/asciidoc/
-wget -c "http://sourceforge.net/projects/asciidoc/files/asciidoc/8.6.2/asciidoc-8.6.2.tar.gz/download"
+wget -c "http://sourceforge.net/projects/asciidoc/files/asciidoc/8.6.7/asciidoc-8.6.7.tar.gz/download"
diff --git a/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools b/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools
index e6f23002..3ed08998 100755
--- a/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools
+++ b/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools
@@ -31,8 +31,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
-export PKGVERSION=0.9.66 # use the version of linuxdoc-tools as the package version.
-BUILD=${BUILD:-8}
+export PKGVERSION=0.9.67 # use the version of linuxdoc-tools as the package version.
+BUILD=${BUILD:-2}
 PKGEXT=${PKGEXT:-txz}
 
 export CWD=$PWD
diff --git a/source/ap/lm_sensors/lm_sensors.SlackBuild b/source/ap/lm_sensors/lm_sensors.SlackBuild
index 83785a56..cb1b26cc 100755
--- a/source/ap/lm_sensors/lm_sensors.SlackBuild
+++ b/source/ap/lm_sensors/lm_sensors.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=lm_sensors
-VERSION=${VERSION:-3.1.2}
+VERSION=${VERSION:-3.3.2}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/ap/lsscsi/lsscsi.SlackBuild b/source/ap/lsscsi/lsscsi.SlackBuild
index e0ed72fe..3c034b82 100755
--- a/source/ap/lsscsi/lsscsi.SlackBuild
+++ b/source/ap/lsscsi/lsscsi.SlackBuild
@@ -110,9 +110,17 @@ fi
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  AUTHORS COPYING CREDITS ChangeLog INSTALL NEWS README \
+  AUTHORS COPYING CREDITS INSTALL NEWS README \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 #zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/ap/lxc/lxc.SlackBuild b/source/ap/lxc/lxc.SlackBuild
index 15df88c6..7b82f89e 100755
--- a/source/ap/lxc/lxc.SlackBuild
+++ b/source/ap/lxc/lxc.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=lxc
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | rev | cut -f 2- -d -)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/ap/man-pages/man-pages.SlackBuild b/source/ap/man-pages/man-pages.SlackBuild
index 8930798b..85cfc0d2 100755
--- a/source/ap/man-pages/man-pages.SlackBuild
+++ b/source/ap/man-pages/man-pages.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -33,7 +33,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf man-pages-$VERSION
-tar xf $CWD/man-pages-$VERSION.tar.bz2
+tar xf $CWD/man-pages-$VERSION.tar.xz
 tar xf $CWD/man-pages-posix-2003-a.tar.bz2
 chown -R root:root man-pages-$VERSION man-pages-posix-2003-a
 chmod -R a-s,u+rw,go+r-w man-pages-$VERSION man-pages-posix-2003-a
diff --git a/source/ap/mc/mc.SlackBuild b/source/ap/mc/mc.SlackBuild
index 87e929ac..21d997db 100755
--- a/source/ap/mc/mc.SlackBuild
+++ b/source/ap/mc/mc.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo mc-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -56,6 +56,7 @@ cd $TMP
 rm -rf mc-$VERSION
 tar xvf $CWD/mc-$VERSION.tar.xz || exit 1
 cd mc-$VERSION || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -63,8 +64,11 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# Fix tmp path for saving files:
+zcat $CWD/mc.save.file.diff.gz | patch -p1 --verbose || exit 1
+
 # Use geeqie instead of gqview as an external image viewer:
-zcat $CWD/mc.ext.in.geeqie.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/mc.image.sh.geeqie.diff.gz | patch -p1 --verbose || exit 1
 
 if [ ! -x ./configure ]; then
   ./autogen.sh
@@ -106,8 +110,20 @@ cp -a $CWD/profile.d/mc.* $PKG/etc/profile.d
 chown root:root $PKG/etc/profile.d/*
 chmod 755 $PKG/etc/profile.d/*
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/mc-$VERSION
 cp -a \
diff --git a/source/ap/mc/mc.ext.in.geeqie.diff b/source/ap/mc/mc.ext.in.geeqie.diff
deleted file mode 100644
index 8cdfecca..00000000
--- a/source/ap/mc/mc.ext.in.geeqie.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./misc/mc.ext.in.orig	2010-11-08 05:46:13.000000000 -0600
-+++ ./misc/mc.ext.in	2010-11-11 14:34:30.000000000 -0600
-@@ -391,7 +391,7 @@
- 	Include=image
- 
- include/image
--	Open=if [ "$DISPLAY" = "" ]; then zgv %f; else (gqview %f &); fi
-+	Open=if [ "$DISPLAY" = "" ]; then zgv %f; else (geeqie %f &); fi
- 	View=%view{ascii} identify %f
- 	#View=%view{ascii} asciiview %f
- 
diff --git a/source/ap/mc/mc.image.sh.geeqie.diff b/source/ap/mc/mc.image.sh.geeqie.diff
new file mode 100644
index 00000000..413807e9
--- /dev/null
+++ b/source/ap/mc/mc.image.sh.geeqie.diff
@@ -0,0 +1,11 @@
+--- ./misc/ext.d/image.sh.orig	2012-07-18 04:30:23.000000000 -0500
++++ ./misc/ext.d/image.sh	2012-09-08 14:39:11.998159169 -0500
+@@ -36,7 +36,7 @@
+         if [ "$DISPLAY" = "" ]; then
+             zgv "${MC_EXT_FILENAME}"
+         else
+-            (gqview "${MC_EXT_FILENAME}" &)
++            (geeqie "${MC_EXT_FILENAME}" &)
+         fi
+         ;;
+     esac
diff --git a/source/ap/mc/mc.save.file.diff b/source/ap/mc/mc.save.file.diff
new file mode 100644
index 00000000..f54748c1
--- /dev/null
+++ b/source/ap/mc/mc.save.file.diff
@@ -0,0 +1,37 @@
+diff --git a/src/editor/editcmd.c b/src/editor/editcmd.c
+index 2261aaa..536ac7e 100644
+--- a/src/editor/editcmd.c
++++ b/src/editor/editcmd.c
+@@ -222,7 +222,8 @@ edit_save_file (WEdit * edit, const vfs_path_t * filename_vpath)
+         if (savedir == NULL)
+             savedir = g_strdup (".");
+ 
+-        saveprefix = mc_build_filename (savedir, "cooledit", NULL);
++        /* Token-related function never return leading slash, so we need add it manually */
++        saveprefix = mc_build_filename ("/", savedir, "cooledit", NULL);
+         g_free (savedir);
+         fd = mc_mkstemps (&savename_vpath, saveprefix, NULL);
+         g_free (saveprefix);
+@@ -365,13 +366,21 @@ edit_save_file (WEdit * edit, const vfs_path_t * filename_vpath)
+ 
+     if (this_save_mode == EDIT_DO_BACKUP)
+     {
++        char *tmp_store_filename;
++        vfs_path_element_t *last_vpath_element;
+         vfs_path_t *tmp_vpath;
+         gboolean ok;
+ 
+ #ifdef HAVE_ASSERT_H
+         assert (option_backup_ext != NULL);
+ #endif
+-        tmp_vpath = vfs_path_append_new (real_filename_vpath, option_backup_ext, (char *) NULL);
++        /* add backup extention to the path */
++        tmp_vpath = vfs_path_clone (real_filename_vpath);
++        last_vpath_element = (vfs_path_element_t *) vfs_path_get_by_index (tmp_vpath, -1);
++        tmp_store_filename = last_vpath_element->path;
++        last_vpath_element->path = g_strdup_printf ("%s%s", tmp_store_filename, option_backup_ext);
++        g_free (tmp_store_filename);
++
+         ok = (mc_rename (real_filename_vpath, tmp_vpath) != -1);
+         vfs_path_free (tmp_vpath);
+         if (!ok)
diff --git a/source/ap/moc/moc.SlackBuild b/source/ap/moc/moc.SlackBuild
index 48ae54b9..35f6fc5f 100755
--- a/source/ap/moc/moc.SlackBuild
+++ b/source/ap/moc/moc.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=moc
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | rev | cut -f 2- -d -)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/ap/mysql/README.mysql-embedded b/source/ap/mysql/README.mysql-embedded
new file mode 100644
index 00000000..21b519e9
--- /dev/null
+++ b/source/ap/mysql/README.mysql-embedded
@@ -0,0 +1,7 @@
+The mysql-embedded.SlackBuild produces a package containing
+a static libmysqld.a library (and some support files) that
+is required in order to build applications that embed a
+mysql server (such as amarok).  If you need to build such
+applications, first you'll need to use this SlackBuild to
+prepare a mysql package that contains embedded support and
+install it on your system.
diff --git a/source/ap/mysql/doinst.sh b/source/ap/mysql/doinst.sh
index 22f77474..a5d835fa 100644
--- a/source/ap/mysql/doinst.sh
+++ b/source/ap/mysql/doinst.sh
@@ -19,4 +19,5 @@ if [ -e etc/rc.d/rc.mysqld ]; then
 fi
 
 config etc/rc.d/rc.mysqld.new
+config etc/mysqlaccess.conf.new
 
diff --git a/source/ap/mysql/mirror-url b/source/ap/mysql/mirror-url
new file mode 100644
index 00000000..33ff56b0
--- /dev/null
+++ b/source/ap/mysql/mirror-url
@@ -0,0 +1 @@
+http://cdn.mysql.com/Downloads/MySQL-5.5/mysql-5.5.25a.tar.gz
diff --git a/source/ap/mysql/mysql-embedded.SlackBuild b/source/ap/mysql/mysql-embedded.SlackBuild
new file mode 100755
index 00000000..f5f178a9
--- /dev/null
+++ b/source/ap/mysql/mysql-embedded.SlackBuild
@@ -0,0 +1,221 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Build and install MySQL on Slackware
+# by:  David Cantrell <david@slackware.com>
+# Currently maintained by:  Patrick Volkerding <volkerdi@slackware.com>
+
+
+VERSION=${VERSION:-$(echo mysql-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mysql
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf mysql-$VERSION
+tar xvf $CWD/mysql-$VERSION.tar.?z* || exit 1
+cd mysql-$VERSION
+
+if ls $CWD/*.diff.gz 1> /dev/null 2> /dev/null ; then
+  for patch in $CWD/*.diff.gz ; do
+    zcat $patch | patch -p1 --verbose || exit 1
+  done
+fi
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+mkdir build
+cd build
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS -felide-constructors -fno-exceptions -fno-rtti" \
+CXX=gcc \
+cmake \
+  -DBUILD_CONFIG=mysql_release \
+  -DFEATURE_SET="community" \
+  -DINSTALL_LAYOUT="RPM" \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DINSTALL_LIBDIR="lib${LIBDIRSUFFIX}" \
+  -DINSTALL_SBINDIR=libexec \
+  -DINSTALL_INCLUDEDIR=include/mysql \
+  -DINSTALL_MYSQLSHAREDIR=share/mysql \
+  -DINSTALL_SQLBENCHDIR= \
+  -DINSTALL_MYSQLTESTDIR=mysql-test \
+  -DINSTALL_INFODIR=info \
+  -DINSTALL_MANDIR=man \
+  -DINSTALL_PLUGINDIR="lib${LIBDIRSUFFIX}/mysql/plugin" \
+  -DINSTALL_SCRIPTDIR=bin \
+  -DINSTALL_SUPPORTFILESDIR=share/mysql \
+  -DINSTALL_MYSQLDATADIR="/var/lib/mysql" \
+  -DMYSQL_DATADIR="/var/lib/mysql" \
+  -DMYSQL_UNIX_ADDR="/var/run/mysql/mysql.sock" \
+  -DWITH_EXTRA_CHARSETS=complex \
+  -DWITH_INNOBASE_STORAGE_ENGINE=1 \
+  -DENABLED_LOCAL_INFILE=ON \
+  -DWITH_EMBEDDED_SERVER=ON \
+  -DWITH_READLINE=ON \
+  -DWITH_SSL=system \
+  -DWITH_ZLIB=system \
+  ..
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+# Install sample configuration files:
+mkdir -p $PKG/etc/mysql
+cp support-files/my-*.cnf $PKG/etc/mysql
+
+# Move mysqlaccess.conf to a more proper place
+mv $PKG/usr/bin/mysqlaccess.conf $PKG/etc/mysqlaccess.conf.new
+chmod 644 $PKG/etc/mysqlaccess.conf.new
+
+# Leave build directory:
+cd ..
+
+# install additional headers needed for building external engine plugins:
+mkdir -p $PKG/usr/include/mysql/private/atomic
+
+install -m 644 regex/my_regex.h $PKG/usr/include/mysql/private/
+
+for i in sql include; do
+  for j in $i/*.h; do
+    install -m 644 $j $PKG/usr/include/mysql/private/
+  done
+done
+
+for i in include/atomic/*.h; do
+  install -m 644 $i $PKG/usr/include/mysql/private/atomic/
+done
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Install docs
+mkdir -p $PKG/usr/doc/mysql-$VERSION/Docs
+cp -a \
+  BUILD* COPYING* EXCEPTIONS* INSTALL-SOURCE README* VERSION \
+  $PKG/usr/doc/mysql-$VERSION
+( cd Docs
+  # Seems most of the Docs/* are gone, but we'll leave the cp stuff
+  # in case it returns.
+  cp -a INFO_SRC INSTALL-BINARY *.html *.txt Flags \
+     $PKG/usr/doc/mysql-$VERSION/Docs )
+## Too large to justify since the .html version is right there:
+#rm $PKG/usr/doc/mysql-$VERSION/Docs/manual.txt
+find $PKG/usr/doc/mysql-$VERSION -type f -exec chmod 0644 {} \;
+
+# This is the directory where databases are stored:
+mkdir -p $PKG/var/lib/mysql
+chown mysql.mysql $PKG/var/lib/mysql
+chmod 0750 $PKG/var/lib/mysql
+
+# This is where the socket is stored:
+mkdir -p $PKG/var/run/mysql
+chown mysql.mysql $PKG/var/run/mysql
+chmod 0755 $PKG/var/run/mysql
+
+# Do not package the test suite:
+rm -rf $PKG/usr/mysql-test
+
+# More unpackaged things:
+rm -f $PKG/usr/info/dir
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libmysqlclient.a
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libmysqlclient_r.*
+( cd $PKG/usr/lib${LIBDIRSUFFIX} ; ln -sf libmysqlclient.so libmysqlclient_r.so )
+
+# Add init script:
+mkdir -p $PKG/etc/rc.d
+# This is intentionally chmod 644.
+zcat $CWD/rc.mysqld.gz > $PKG/etc/rc.d/rc.mysqld.new
+
+# Install script:
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+# Build package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/mysql-$VERSION-$ARCH-${BUILD}_withembedded.txz
diff --git a/source/ap/mysql/mysql-embedded.build b/source/ap/mysql/mysql-embedded.build
deleted file mode 100755
index 004bb30d..00000000
--- a/source/ap/mysql/mysql-embedded.build
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/sh
-# Build and install MySQL on Slackware
-# by:  David Cantrell <david@slackware.com>
-# Currently maintained by:  Patrick Volkerding <volkerdi@slackware.com>
-
-VERSION=${VERSION:-$(echo mysql-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mysql
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf mysql-$VERSION
-tar xvf $CWD/mysql-$VERSION.tar.?z* || exit 1
-cd mysql-$VERSION
-
-if ls $CWD/*.diff.gz 1> /dev/null 2> /dev/null ; then
-  for patch in $CWD/*.diff.gz ; do
-    zcat $patch | patch -p1 --verbose || exit 1
-  done
-fi
-
-CFLAGS="$SLKCFLAGS -fPIC" CXXFLAGS="$SLKCFLAGS -fPIC" \
-    ./configure --prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} \
-    --datadir=/usr/share --sysconfdir=/etc/mysql \
-    --libexecdir=/usr/sbin --localstatedir=/var/lib/mysql \
-    --without-docs --without-man --without-server \
-    --with-embedded-server \
-    --without-readline --disable-shared --with-charset=utf8 \
-    --without-debug --with-pthread --without-ssl --without-query-cache \
-    --without-geometry --with-pic
-
-make -j6 || make || exit 1
-
-cp libmysqld/libmysqld.a /usr/lib${LIBDIRSUFFIX}/mysql/
-
diff --git a/source/ap/mysql/mysql.SlackBuild b/source/ap/mysql/mysql.SlackBuild
index ce149a15..6690c0f5 100755
--- a/source/ap/mysql/mysql.SlackBuild
+++ b/source/ap/mysql/mysql.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -77,82 +77,104 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
+mkdir build
+cd build
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS -felide-constructors -fno-exceptions -fno-rtti" \
 CXX=gcc \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --with-mysqld-user=mysql \
-  --with-unix-socket-path=/var/run/mysql/mysql.sock \
-  --localstatedir=/var/lib/mysql \
-  --mandir=/usr/man \
-  --infodir=/usr/info \
-  --enable-assembler \
-  --without-debug \
-  --enable-thread-safe-client \
-  --with-extra-charsets=complex \
-  --with-ssl=/usr \
-  --enable-largefile \
-  --with-innodb \
-  --with-readline \
-  --build=$ARCH-slackware-linux
-#
-# --without-readline
+cmake \
+  -DBUILD_CONFIG=mysql_release \
+  -DFEATURE_SET="community" \
+  -DINSTALL_LAYOUT="RPM" \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DINSTALL_LIBDIR="lib${LIBDIRSUFFIX}" \
+  -DINSTALL_SBINDIR=libexec \
+  -DINSTALL_INCLUDEDIR=include/mysql \
+  -DINSTALL_MYSQLSHAREDIR=share/mysql \
+  -DINSTALL_SQLBENCHDIR= \
+  -DINSTALL_MYSQLTESTDIR=mysql-test \
+  -DINSTALL_INFODIR=info \
+  -DINSTALL_MANDIR=man \
+  -DINSTALL_PLUGINDIR="lib${LIBDIRSUFFIX}/mysql/plugin" \
+  -DINSTALL_SCRIPTDIR=bin \
+  -DINSTALL_SUPPORTFILESDIR=share/mysql \
+  -DINSTALL_MYSQLDATADIR="/var/lib/mysql" \
+  -DMYSQL_DATADIR="/var/lib/mysql" \
+  -DMYSQL_UNIX_ADDR="/var/run/mysql/mysql.sock" \
+  -DWITH_EXTRA_CHARSETS=complex \
+  -DWITH_INNOBASE_STORAGE_ENGINE=1 \
+  -DENABLED_LOCAL_INFILE=ON \
+  -DWITH_EMBEDDED_SERVER=OFF \
+  -DWITH_READLINE=ON \
+  -DWITH_SSL=system \
+  -DWITH_ZLIB=system \
+  ..
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG
 
-# install additional headers needed for building external engine plugins
-for i in sql include regex; do
+# Install sample configuration files:
+mkdir -p $PKG/etc/mysql
+cp support-files/my-*.cnf $PKG/etc/mysql
+
+# Move mysqlaccess.conf to a more proper place
+mv $PKG/usr/bin/mysqlaccess.conf $PKG/etc/mysqlaccess.conf.new
+chmod 644 $PKG/etc/mysqlaccess.conf.new
+
+# Leave build directory:
+cd ..
+
+# install additional headers needed for building external engine plugins:
+mkdir -p $PKG/usr/include/mysql/private/atomic
+
+install -m 644 regex/my_regex.h $PKG/usr/include/mysql/private/
+
+for i in sql include; do
   for j in $i/*.h; do
-    install -m 644 $j $PKG/usr/include/mysql/
+    install -m 644 $j $PKG/usr/include/mysql/private/
   done
 done
 
-mkdir -p $PKG/usr/include/mysql/atomic
 for i in include/atomic/*.h; do
-  install -m 644 $i $PKG/usr/include/mysql/atomic/
+  install -m 644 $i $PKG/usr/include/mysql/private/atomic/
 done
 
-# The ./configure option to omit this has gone away, so we'll omit it
-# the old-fashioned way.  It's all in the source tarball if you need it.
-rm -rf $PKG/usr/sql-bench
-
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-# Install support files
-mkdir -p $PKG/etc
-cp support-files/my-{huge,large,medium,small}.cnf $PKG/etc
-
 # Install docs
 mkdir -p $PKG/usr/doc/mysql-$VERSION/Docs
 cp -a \
-  COPYING* EXCEPTIONS* INSTALL-SOURCE README* \
+  BUILD* COPYING* EXCEPTIONS* INSTALL-SOURCE README* VERSION \
   $PKG/usr/doc/mysql-$VERSION
 ( cd Docs
   # Seems most of the Docs/* are gone, but we'll leave the cp stuff
   # in case it returns.
-  cp -a INSTALL-BINARY *.html *.txt Flags \
+  cp -a INFO_SRC INSTALL-BINARY *.html *.txt Flags \
      $PKG/usr/doc/mysql-$VERSION/Docs )
 ## Too large to justify since the .html version is right there:
 #rm $PKG/usr/doc/mysql-$VERSION/Docs/manual.txt
 find $PKG/usr/doc/mysql-$VERSION -type f -exec chmod 0644 {} \;
 
-# This is the directory where databases are stored
+# This is the directory where databases are stored:
 mkdir -p $PKG/var/lib/mysql
 chown mysql.mysql $PKG/var/lib/mysql
 chmod 0750 $PKG/var/lib/mysql
 
-# This is where the socket is stored
+# This is where the socket is stored:
 mkdir -p $PKG/var/run/mysql
 chown mysql.mysql $PKG/var/run/mysql
 chmod 0755 $PKG/var/run/mysql
 
-# Do not include the test suite:
+# Do not package the test suite:
 rm -rf $PKG/usr/mysql-test
 
+# More unpackaged things:
+rm -f $PKG/usr/info/dir
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libmysqlclient.a
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libmysqlclient_r.*
+( cd $PKG/usr/lib${LIBDIRSUFFIX} ; ln -sf libmysqlclient.so libmysqlclient_r.so )
+
 # Add init script:
 mkdir -p $PKG/etc/rc.d
 # This is intentionally chmod 644.
@@ -163,29 +185,6 @@ mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
-# Add some handy library symlinks:
-if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient.so.16 ]; then
-  ( cd $PKG/usr/lib${LIBDIRSUFFIX}
-    rm -f libmysqlclient.so libmysqlclient.so.16
-    ln -sf mysql/libmysqlclient.so .
-    ln -sf mysql/libmysqlclient.so.16 .
-  )
-else
-  exit 1
-fi
-if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient_r.so.16 ]; then
-  ( cd $PKG/usr/lib${LIBDIRSUFFIX}
-    rm -f libmysqlclient_r.so libmysqlclient_r.so.16
-    ln -sf mysql/libmysqlclient_r.so .
-    ln -sf mysql/libmysqlclient_r.so.16 .
-  )
-else
-  exit 1
-fi
-
-# Packaging standards:
-rm -f $PKG/usr/info/dir
-
 # Compress and link manpages, if any:
 if [ -d $PKG/usr/man ]; then
   ( cd $PKG/usr/man
@@ -220,4 +219,3 @@ fi
 # Build package:
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/mysql-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/ap/nano/doinst.sh b/source/ap/nano/doinst.sh
new file mode 100644
index 00000000..3cd3405f
--- /dev/null
+++ b/source/ap/nano/doinst.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/nanorc.new
diff --git a/source/ap/nano/nano.SlackBuild b/source/ap/nano/nano.SlackBuild
index c6e3c3ad..0f9e114c 100755
--- a/source/ap/nano/nano.SlackBuild
+++ b/source/ap/nano/nano.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=nano
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -39,12 +39,24 @@ fi
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+  ARCHQUADLET=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  ARCHQUADLET=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  ARCHQUADLET=""
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv5te"
+  LIBDIRSUFFIX=""
+  ARCHQUADLET="-gnueabi"
 else
   SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  ARCHQUADLET=""
 fi
 
 CWD=$(pwd)
@@ -80,7 +92,8 @@ CFLAGS="$SLKCFLAGS" \
   --enable-nanorc \
   --enable-all \
   --enable-utf8 \
-  --build=$ARCH-slackware-linux
+  --disable-wrapping-as-root \
+  --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1
 
 # Build and install:
 make $NUMJOBS || make || exit 1
@@ -113,6 +126,13 @@ if [ -d $PKG/usr/info ]; then
   )
 fi
 
+# Install a default /etc/nanorc file.  This is the standard sample
+# file from the doc directory that loads the colour configurations
+# from /usr/share/nano.
+mkdir -vpm755 $PKG/etc
+sed 's?^# include?include?g' doc/nanorc.sample > $PKG/etc/nanorc.new 
+chmod 644 $PKG/etc/nanorc.new
+
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
@@ -128,8 +148,10 @@ if [ -r ChangeLog ]; then
   touch -r ChangeLog $DOCSDIR/ChangeLog
 fi
 
+# Place the package description and installation script:
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/ap/ntfsprogs/ntfsprogs.SlackBuild b/source/ap/ntfsprogs/ntfsprogs.SlackBuild
deleted file mode 100755
index 5c83bd21..00000000
--- a/source/ap/ntfsprogs/ntfsprogs.SlackBuild
+++ /dev/null
@@ -1,134 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=ntfsprogs
-VERSION=${VERSION:-2.0.0}
-BUILD=${BUILD:-2}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
-cd ${PKGNAM}-$VERSION || exit 1
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Configure:
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --bindir=/bin \
-  --sysconfdir=/etc \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --disable-gnome-vfs \
-  --disable-ntfsmount \
-  --disable-static \
-  --build=$ARCH-slackware-linux
-
-# Build and install:
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-mkdir -p $PKG/lib${LIBDIRSUFFIX}
-mv $PKG/usr/lib${LIBDIRSUFFIX}/libntfs.so.* $PKG/lib${LIBDIRSUFFIX}
-( cd $PKG/usr/lib${LIBDIRSUFFIX} ; ln -sf ../../lib${LIBDIRSUFFIX}/libntfs* . )
-
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.*
-      )
-    done
-  )
-fi
-
-# Compress info files, if any:
-if [ -d $PKG/usr/info ]; then
-  ( cd $PKG/usr/info
-    rm -f dir
-    gzip -9 *
-  )
-fi
-
-# Add a documentation directory:
-mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
-cp -a \
-  AUTHORS COPYING* CREDITS INSTALL NEWS README TODO* doc \
-  $PKG/usr/doc/${PKGNAM}-$VERSION
-rm -f $PKG/usr/doc/${PKGNAM}-$VERSION/doc/Makefile*
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/ap/ntfsprogs/slack-desc b/source/ap/ntfsprogs/slack-desc
deleted file mode 100644
index 4ed38c92..00000000
--- a/source/ap/ntfsprogs/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-         |-----handy-ruler------------------------------------------------------|
-ntfsprogs: ntfsprogs (utilities for working with NTFS volumes)
-ntfsprogs:
-ntfsprogs: The ntfsprogs includes utilities for doing all required tasks to NTFS
-ntfsprogs: partitions.  In general, just run a utility without any command line
-ntfsprogs: options to display the version number and usage syntax.  The following
-ntfsprogs: utilities are implemented (so far): ntfsfix, mkntfs, ntfslabel,
-ntfsprogs: ntfsundelete, ntfsresize, ntfsclone, ntfscluster, ntfsinfo, ntfsls,
-ntfsprogs: ntfscat, ntfscp, and ntfsmount.
-ntfsprogs:
-ntfsprogs: The Linux-NTFS home page is:  http://www.linux-ntfs.org/
-ntfsprogs:
diff --git a/source/ap/powertop/powertop.SlackBuild b/source/ap/powertop/powertop.SlackBuild
index 7767580b..f4f4beae 100755
--- a/source/ap/powertop/powertop.SlackBuild
+++ b/source/ap/powertop/powertop.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,10 +20,14 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified by Willy Sudiarto Raharjo
+# Changelog
+# May, 11 : Bumped to 2.0, Fix compilation process, Added patch to fix complaints about a file
+# May, 18 : Rebuilt, removed non-existence directory for man pages
 
 PKGNAM=powertop
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -35,6 +39,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
@@ -68,21 +74,45 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+LDFLAGS=" -lresolv -lz " \
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
 # Build and install:
-make || exit 1
+make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Move man pages:
-mv $PKG/usr/share/man $PKG/usr
-
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  COPYING* README* \
+  COPYING* README* TODO \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/ap/rpm/rpm.SlackBuild b/source/ap/rpm/rpm.SlackBuild
index 2f930c37..2891472b 100755
--- a/source/ap/rpm/rpm.SlackBuild
+++ b/source/ap/rpm/rpm.SlackBuild
@@ -55,10 +55,7 @@ elif [ "$ARCH" = "armel" ]; then
   LIBDIRSUFFIX=""
 fi
 
-NSS_INC="/usr/include/seamonkey/nss"
-NSPR_INC="/usr/include/seamonkey/nspr"
-DB_INC="/usr/include/db44"
-NSS_LIBS="/usr/lib${LIBDIRSUFFIX}/seamonkey"
+DB_INC="/usr/include/db48"
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
@@ -78,11 +75,11 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# We have to tell it where to find Seamonkey's NSS.
+# We have to tell it where to find NSS and NSPR
 # Also, --enable-sqlite3 needs "-ldl" in LDFLAGS
 # And --enable-broken-chown fits, as ours follows symlinks.
-CFLAGS="$SLKCFLAGS -I$NSS_INC -I$NSPR_INC -I$DB_INC" \
-LDFLAGS="-L${NSS_LIBS} -ldl" \
+CFLAGS="$SLKCFLAGS -I${DB_INC} $(pkg-config --cflags nspr nss)" \
+LDFLAGS="-ldl" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
diff --git a/source/ap/screen/screen.SlackBuild b/source/ap/screen/screen.SlackBuild
index 3464bc4a..29ad8c69 100755
--- a/source/ap/screen/screen.SlackBuild
+++ b/source/ap/screen/screen.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=${VERSION:-4.0.3}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -51,10 +51,13 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf screen-$VERSION
-tar xjvf $CWD/screen-$VERSION.tar.bz2
+tar xvf $CWD/screen-$VERSION.tar.?z* || exit 1
 
 cd screen-$VERSION || exit 1
 
+# Increase the size of the termname buffer from 20 to 63:
+zcat $CWD/screen.d_termname.envterm.buffersizeincrease.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -72,7 +75,7 @@ CFLAGS="$SLKCFLAGS" \
   --enable-locale \
   --enable-colors256 \
   --enable-rxvt_osc \
-  $ARCH-slackware-linux
+  --build=$ARCH-slackware-linux
 
 # Substitutions:
 perl -pi -e 's|.*#undef HAVE_BRAILLE.*|#define HAVE_BRAILLE 1|' config.h
diff --git a/source/ap/screen/screen.d_termname.envterm.buffersizeincrease.diff b/source/ap/screen/screen.d_termname.envterm.buffersizeincrease.diff
new file mode 100644
index 00000000..26765d6c
--- /dev/null
+++ b/source/ap/screen/screen.d_termname.envterm.buffersizeincrease.diff
@@ -0,0 +1,22 @@
+--- ./display.h.orig	2003-07-01 09:01:42.000000000 -0500
++++ ./display.h	2011-07-18 16:01:03.691998366 -0500
+@@ -85,7 +85,7 @@
+   struct win *d_other;		/* pointer to other window */
+   int   d_nonblock;		/* -1 don't block if obufmax reached */
+ 				/* >0: block after nonblock secs */
+-  char  d_termname[20 + 1];	/* $TERM */
++  char  d_termname[63 + 1];	/* $TERM */
+   char	*d_tentry;		/* buffer for tgetstr */
+   char	d_tcinited;		/* termcap inited flag */
+   int	d_width, d_height;	/* width/height of the screen */
+--- ./screen.h.orig	2003-08-22 07:28:43.000000000 -0500
++++ ./screen.h	2011-07-18 16:01:09.388004936 -0500
+@@ -202,7 +202,7 @@
+ 	  char preselect[20];
+ 	  int esc;		/* his new escape character unless -1 */
+ 	  int meta_esc;		/* his new meta esc character unless -1 */
+-	  char envterm[20 + 1];	/* terminal type */
++	  char envterm[63 + 1];	/* terminal type */
+ 	  int encoding;		/* encoding of display */
+ 	}
+       attach;
diff --git a/source/ap/soma/slack-desc b/source/ap/soma/slack-desc
new file mode 100644
index 00000000..bc1725a6
--- /dev/null
+++ b/source/ap/soma/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+soma: Soma - a command line/dialog internet radio player
+soma:
+soma: Soma is a frontend for mplayer to play radio playlists pls,m3u and 
+soma: ram. More will be added as it progresses.
+soma:
+soma: Homepage: http://www.dawoodfall.net/slackbuilds/noversion/soma
+soma:
+soma:
+soma:
+soma:
+soma:
diff --git a/source/ap/soma/soma.SlackBuild b/source/ap/soma/soma.SlackBuild
new file mode 100755
index 00000000..c7cc38ae
--- /dev/null
+++ b/source/ap/soma/soma.SlackBuild
@@ -0,0 +1,67 @@
+#!/bin/sh
+
+# Slackware build script for soma
+# Copyright 2010-2011 David Woodfall <dave@dawoodfall.net>
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=soma
+VERSION=${VERSION:-2.8.5}
+ARCH=noarch
+BUILD=${BUILD:-1}
+TAG=${TAG:-}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e 
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.gz
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+mkdir -p $PKG/usr/bin $PKG/etc/soma $PKG/install $PKG/usr/doc/$PKGNAM-$VERSION
+
+install -m 755 soma $PKG/usr/bin/soma
+install --m 644 options.conf $PKG/etc/soma
+install --m 644 stations.conf $PKG/etc/soma
+install --m 644 dialogrc $PKG/etc/soma
+
+cp -a \
+   README  \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+#cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}
+
diff --git a/source/ap/soma/soma.info b/source/ap/soma/soma.info
new file mode 100644
index 00000000..0255d3d6
--- /dev/null
+++ b/source/ap/soma/soma.info
@@ -0,0 +1,10 @@
+PRGNAM="soma"
+VERSION="2.8.5"
+HOMEPAGE="http://www.dawoodfall.net/files/slackbuilds/noversion/soma/"
+DOWNLOAD="http://www.dawoodfall.net/files/slackbuilds/noversion/soma/soma-2.8.5.tar.gz"
+MD5SUM="193112a1dc8de8781b83d3a1bceedee6"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="David Woodfall"
+EMAIL="dave@dawoodfall.net"
+APPROVED=""
diff --git a/source/ap/soma/soma.png b/source/ap/soma/soma.png
new file mode 100644
index 00000000..1e545a93
--- /dev/null
+++ b/source/ap/soma/soma.png
diff --git a/source/ap/soma/stations.conf b/source/ap/soma/stations.conf
new file mode 100644
index 00000000..4a2c4308
--- /dev/null
+++ b/source/ap/soma/stations.conf
@@ -0,0 +1,38 @@
+Groove Salad,http://somafm.com/groovesalad130.pls
+Lush,http://somafm.com/lush.pls
+Suburbs of Goa,http://somafm.com/suburbsofgoa.pls
+Drone Zone,http://somafm.com/dronezone.pls
+Indie Pop Rocks,http://somafm.com/indiepop.pls
+Digitalis,http://somafm.com/digitalis.pls
+PopTron,http://somafm.com/poptron.pls
+Covers,http://somafm.com/covers.pls
+Secret Agent,http://somafm.com/secretagent.pls
+Boot Liquor,http://somafm.com/bootliquor.pls
+Illinois Street Lounge,http://somafm.com/illstreet.pls
+Cliqhop IDM,http://somafm.com/cliqhop.pls
+Sonic Universe,http://somafm.com/sonicuniverse.pls
+Beat Blender,http://somafm.com/beatblender.pls
+Tag's Trip,http://somafm.com/tags.pls
+Space Station Soma,http://somafm.com/spacestation.pls
+Mission Control,http://somafm.com/missioncontrol.pls
+Doomed,http://somafm.com/doomed.pls
+BBC Radio 1,http://www.bbc.co.uk/radio/listen/live/r1.asx
+BBC Radio 2,http://www.bbc.co.uk/radio/listen/live/r2.asx
+BBC Radio 3,http://www.bbc.co.uk/radio/listen/live/r3.asx
+BBC Radio 4,http://www.bbc.co.uk/radio/listen/live/r4.asx
+BBC Radio 7,http://www.bbc.co.uk/radio/listen/live/r7.asx
+BBC World Service,http://www.bbc.co.uk/worldservice/meta/tx/nb/live/eneuk.asx
+BBC WS News,http://www.bbc.co.uk/worldservice/meta/tx/nb/live/ennws.asx
+Classic FM,http://mediaweb.musicradio.com/V1/Playlist.asx?StreamID=2
+InterGalacticFM1,http://radio.intergalacticfm.com/1.m3u
+InterGalacticFM2,http://radio.intergalacticfm.com/2.m3u
+InterGalacticFM3,http://radio.intergalacticfm.com/3.m3u
+InterGalacticFM4,http://radio.intergalacticfm.com/4.m3u
+DarkWave Gothic,http://yp.shoutcast.com/sbin/tunein-station.pls?id=392221
+Meridian FM,http://www.meridianfm.com/listen2meridianfm.m3uj
+kpfa,http://www.kpfa.org/streams/kpfa_64k.m3u
+wcbn,http://floyd.wcbn.org/wcbn-hi.m3u
+Pyrolitical,http://broadcast.pyrolitical.com:8000/Pyrolitical_Radio.m3u
+Dissident,http://radio.indybay.org:8000/dissidentisland.m3u
+GFMONLINE,http://www.gfmradio.com/GFMONLINE.wvx
+Celtic Music Radio,http://www.celticmusicradio.net/celtic_live.m3u
diff --git a/source/ap/sqlite/sqlite.SlackBuild b/source/ap/sqlite/sqlite.SlackBuild
index 61f259b0..bbb03bd3 100755
--- a/source/ap/sqlite/sqlite.SlackBuild
+++ b/source/ap/sqlite/sqlite.SlackBuild
@@ -3,7 +3,7 @@
 # Slackware build script for sqlite
 
 # Copyright 2006  Martin Lefebvre <dadexter@gmail.com>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -25,7 +25,7 @@
 
 PKGNAM=sqlite
 VERSION=${VERSION:-$(echo $PKGNAM-src-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-OLD_STYLE=$(echo $VERSION | tr 0 . | cut -f 1-3 -d .)
+OLD_STYLE=$(printf %d $(echo $VERSION | cut -b 1)).$(printf %d $(echo $VERSION | cut -b 2,3)).$(printf %d $(echo $VERSION | cut -b 4,5))
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -59,7 +59,7 @@ else
 fi
 
 # Enable some features:
-SLKCFLAGS="$SLKCFLAGS -DSQLITE_ENABLE_COLUMN_METADATA=1 -DSQLITE_DISABLE_DIRSYNC=1 -DSQLITE_ENABLE_RTREE=1 -DSQLITE_ENABLE_STAT2=1 -DSQLITE_ENABLE_UNLOCK_NOTIFY=1 -DSQLITE_SECURE_DELETE=1"
+SLKCFLAGS="$SLKCFLAGS -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_FTS3_PARENTHESIS=1 -DSQLITE_ENABLE_COLUMN_METADATA=1 -DSQLITE_DISABLE_DIRSYNC=1 -DSQLITE_ENABLE_RTREE=1 -DSQLITE_ENABLE_STAT2=1 -DSQLITE_ENABLE_UNLOCK_NOTIFY=1 -DSQLITE_SECURE_DELETE=1"
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
diff --git a/source/ap/sudo/sudo.SlackBuild b/source/ap/sudo/sudo.SlackBuild
index c3b85360..8081e917 100755
--- a/source/ap/sudo/sudo.SlackBuild
+++ b/source/ap/sudo/sudo.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=sudo
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -56,7 +56,7 @@ fi
 
 cd $TMP
 rm -rf sudo-$VERSION
-tar xvf $CWD/sudo-$VERSION.tar.gz || exit 1
+tar xvf $CWD/sudo-$VERSION.tar.?z* || exit 1
 cd sudo-$VERSION
 
 chown -R root:root .
@@ -99,8 +99,8 @@ mv $PKG/etc/sudoers $PKG/etc/sudoers.new
 rm -r $PKG/usr/doc/sudo-$VERSION
 mkdir -p $PKG/usr/doc/sudo-$VERSION
 cp -a \
-  BUGS HISTORY INSTALL LICENSE PORTING README* \
-  RUNSON TODO TROUBLESHOOTING UPGRADE WHATSNEW \
+  INSTALL NEWS README* \
+  doc/{CONTRIBUTORS,HISTORY,LICENSE,TROUBLESHOOTING,UPGRADE} \
   $PKG/usr/doc/sudo-$VERSION
 chmod 644 $PKG/usr/doc/sudo-$VERSION/*
 
diff --git a/source/ap/vbetool/slack-desc b/source/ap/vbetool/slack-desc
index c4396691..b10d5fa4 100644
--- a/source/ap/vbetool/slack-desc
+++ b/source/ap/vbetool/slack-desc
@@ -11,7 +11,7 @@ vbetool:
 vbetool: vbetool is a small application that executes code from the BIOS of 
 vbetool: your video card. 
 vbetool: 
-vbetool: This is mostly useful for reinitialising the hardware, for instance 
+vbetool: This is mostly useful for reinitializing the hardware, for instance 
 vbetool: after ACPI suspend/resuming. 
 vbetool: 
 vbetool: Homepage: http://www.codon.org.uk/~mjg59/vbetool/
diff --git a/source/ap/vim/patches/7.3.155 b/source/ap/vim/patches/7.3.155
new file mode 100644
index 00000000..806efca2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.155
@@ -0,0 +1,286 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.155
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.155
+Problem:    Crash when using map(), filter() and remove() on v:. (ZyX)
+            Also for extend(). (Yukihiro Nakadaira)
+Solution:   Mark v: as locked.  Also correct locking error messages.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.154/src/eval.c	2011-04-01 16:07:41.000000000 +0200
+--- src/eval.c	2011-04-11 13:28:34.000000000 +0200
+***************
+*** 853,858 ****
+--- 853,859 ----
+  
+      init_var_dict(&globvardict, &globvars_var);
+      init_var_dict(&vimvardict, &vimvars_var);
++     vimvardict.dv_lock = VAR_FIXED;
+      hash_init(&compat_hashtab);
+      hash_init(&func_hashtab);
+  
+***************
+*** 8545,8551 ****
+      if (argvars[0].v_type == VAR_LIST)
+      {
+  	if ((l = argvars[0].vval.v_list) != NULL
+! 		&& !tv_check_lock(l->lv_lock, (char_u *)"add()")
+  		&& list_append_tv(l, &argvars[1]) == OK)
+  	    copy_tv(&argvars[0], rettv);
+      }
+--- 8546,8552 ----
+      if (argvars[0].v_type == VAR_LIST)
+      {
+  	if ((l = argvars[0].vval.v_list) != NULL
+! 		&& !tv_check_lock(l->lv_lock, (char_u *)_("add() argument"))
+  		&& list_append_tv(l, &argvars[1]) == OK)
+  	    copy_tv(&argvars[0], rettv);
+      }
+***************
+*** 9946,9951 ****
+--- 9947,9954 ----
+      typval_T	*argvars;
+      typval_T	*rettv;
+  {
++     char      *arg_errmsg = N_("extend() argument");
++ 
+      if (argvars[0].v_type == VAR_LIST && argvars[1].v_type == VAR_LIST)
+      {
+  	list_T		*l1, *l2;
+***************
+*** 9955,9961 ****
+  
+  	l1 = argvars[0].vval.v_list;
+  	l2 = argvars[1].vval.v_list;
+! 	if (l1 != NULL && !tv_check_lock(l1->lv_lock, (char_u *)"extend()")
+  		&& l2 != NULL)
+  	{
+  	    if (argvars[2].v_type != VAR_UNKNOWN)
+--- 9958,9964 ----
+  
+  	l1 = argvars[0].vval.v_list;
+  	l2 = argvars[1].vval.v_list;
+! 	if (l1 != NULL && !tv_check_lock(l1->lv_lock, (char_u *)_(arg_errmsg))
+  		&& l2 != NULL)
+  	{
+  	    if (argvars[2].v_type != VAR_UNKNOWN)
+***************
+*** 9994,10000 ****
+  
+  	d1 = argvars[0].vval.v_dict;
+  	d2 = argvars[1].vval.v_dict;
+! 	if (d1 != NULL && !tv_check_lock(d1->dv_lock, (char_u *)"extend()")
+  		&& d2 != NULL)
+  	{
+  	    /* Check the third argument. */
+--- 9997,10003 ----
+  
+  	d1 = argvars[0].vval.v_dict;
+  	d2 = argvars[1].vval.v_dict;
+! 	if (d1 != NULL && !tv_check_lock(d1->dv_lock, (char_u *)_(arg_errmsg))
+  		&& d2 != NULL)
+  	{
+  	    /* Check the third argument. */
+***************
+*** 10236,10255 ****
+      typval_T	save_key;
+      int		rem;
+      int		todo;
+!     char_u	*ermsg = map ? (char_u *)"map()" : (char_u *)"filter()";
+      int		save_did_emsg;
+      int		idx = 0;
+  
+      if (argvars[0].v_type == VAR_LIST)
+      {
+  	if ((l = argvars[0].vval.v_list) == NULL
+! 		|| (map && tv_check_lock(l->lv_lock, ermsg)))
+  	    return;
+      }
+      else if (argvars[0].v_type == VAR_DICT)
+      {
+  	if ((d = argvars[0].vval.v_dict) == NULL
+! 		|| (map && tv_check_lock(d->dv_lock, ermsg)))
+  	    return;
+      }
+      else
+--- 10239,10260 ----
+      typval_T	save_key;
+      int		rem;
+      int		todo;
+!     char_u	*ermsg = (char_u *)(map ? "map()" : "filter()");
+!     char	*arg_errmsg = (map ? N_("map() argument")
+! 				   : N_("filter() argument"));
+      int		save_did_emsg;
+      int		idx = 0;
+  
+      if (argvars[0].v_type == VAR_LIST)
+      {
+  	if ((l = argvars[0].vval.v_list) == NULL
+! 		|| tv_check_lock(l->lv_lock, (char_u *)_(arg_errmsg)))
+  	    return;
+      }
+      else if (argvars[0].v_type == VAR_DICT)
+      {
+  	if ((d = argvars[0].vval.v_dict) == NULL
+! 		|| tv_check_lock(d->dv_lock, (char_u *)_(arg_errmsg)))
+  	    return;
+      }
+      else
+***************
+*** 10286,10292 ****
+  		{
+  		    --todo;
+  		    di = HI2DI(hi);
+! 		    if (tv_check_lock(di->di_tv.v_lock, ermsg))
+  			break;
+  		    vimvars[VV_KEY].vv_str = vim_strsave(di->di_key);
+  		    if (filter_map_one(&di->di_tv, expr, map, &rem) == FAIL
+--- 10291,10298 ----
+  		{
+  		    --todo;
+  		    di = HI2DI(hi);
+! 		    if (tv_check_lock(di->di_tv.v_lock,
+! 						     (char_u *)_(arg_errmsg)))
+  			break;
+  		    vimvars[VV_KEY].vv_str = vim_strsave(di->di_key);
+  		    if (filter_map_one(&di->di_tv, expr, map, &rem) == FAIL
+***************
+*** 10305,10311 ****
+  
+  	    for (li = l->lv_first; li != NULL; li = nli)
+  	    {
+! 		if (tv_check_lock(li->li_tv.v_lock, ermsg))
+  		    break;
+  		nli = li->li_next;
+  		vimvars[VV_KEY].vv_nr = idx;
+--- 10311,10317 ----
+  
+  	    for (li = l->lv_first; li != NULL; li = nli)
+  	    {
+! 		if (tv_check_lock(li->li_tv.v_lock, (char_u *)_(arg_errmsg)))
+  		    break;
+  		nli = li->li_next;
+  		vimvars[VV_KEY].vv_nr = idx;
+***************
+*** 12910,12916 ****
+      if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listarg), "insert()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)"insert()"))
+      {
+  	if (argvars[2].v_type != VAR_UNKNOWN)
+  	    before = get_tv_number_chk(&argvars[2], &error);
+--- 12916,12922 ----
+      if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listarg), "insert()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)_("insert() argument")))
+      {
+  	if (argvars[2].v_type != VAR_UNKNOWN)
+  	    before = get_tv_number_chk(&argvars[2], &error);
+***************
+*** 14775,14787 ****
+      char_u	*key;
+      dict_T	*d;
+      dictitem_T	*di;
+  
+      if (argvars[0].v_type == VAR_DICT)
+      {
+  	if (argvars[2].v_type != VAR_UNKNOWN)
+  	    EMSG2(_(e_toomanyarg), "remove()");
+  	else if ((d = argvars[0].vval.v_dict) != NULL
+! 		&& !tv_check_lock(d->dv_lock, (char_u *)"remove() argument"))
+  	{
+  	    key = get_tv_string_chk(&argvars[1]);
+  	    if (key != NULL)
+--- 14781,14794 ----
+      char_u	*key;
+      dict_T	*d;
+      dictitem_T	*di;
++     char	*arg_errmsg = N_("remove() argument");
+  
+      if (argvars[0].v_type == VAR_DICT)
+      {
+  	if (argvars[2].v_type != VAR_UNKNOWN)
+  	    EMSG2(_(e_toomanyarg), "remove()");
+  	else if ((d = argvars[0].vval.v_dict) != NULL
+! 		&& !tv_check_lock(d->dv_lock, (char_u *)_(arg_errmsg)))
+  	{
+  	    key = get_tv_string_chk(&argvars[1]);
+  	    if (key != NULL)
+***************
+*** 14801,14807 ****
+      else if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listdictarg), "remove()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)"remove() argument"))
+      {
+  	int	    error = FALSE;
+  
+--- 14808,14814 ----
+      else if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listdictarg), "remove()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)_(arg_errmsg)))
+      {
+  	int	    error = FALSE;
+  
+***************
+*** 15135,15141 ****
+      if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listarg), "reverse()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)"reverse()"))
+      {
+  	li = l->lv_last;
+  	l->lv_first = l->lv_last = NULL;
+--- 15142,15148 ----
+      if (argvars[0].v_type != VAR_LIST)
+  	EMSG2(_(e_listarg), "reverse()");
+      else if ((l = argvars[0].vval.v_list) != NULL
+! 	    && !tv_check_lock(l->lv_lock, (char_u *)_("reverse() argument")))
+      {
+  	li = l->lv_last;
+  	l->lv_first = l->lv_last = NULL;
+***************
+*** 16432,16438 ****
+      else
+      {
+  	l = argvars[0].vval.v_list;
+! 	if (l == NULL || tv_check_lock(l->lv_lock, (char_u *)"sort()"))
+  	    return;
+  	rettv->vval.v_list = l;
+  	rettv->v_type = VAR_LIST;
+--- 16439,16446 ----
+      else
+      {
+  	l = argvars[0].vval.v_list;
+! 	if (l == NULL || tv_check_lock(l->lv_lock,
+! 					     (char_u *)_("sort() argument")))
+  	    return;
+  	rettv->vval.v_list = l;
+  	rettv->v_type = VAR_LIST;
+*** ../vim-7.3.154/src/version.c	2011-04-02 15:12:45.000000000 +0200
+--- src/version.c	2011-04-11 13:13:38.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     155,
+  /**/
+
+-- 
+I used to be indecisive, now I'm not sure.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.156 b/source/ap/vim/patches/7.3.156
new file mode 100644
index 00000000..ec873242
--- /dev/null
+++ b/source/ap/vim/patches/7.3.156
@@ -0,0 +1,89 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.156
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.156
+Problem:    Tty names possibly left unterminated.
+Solution:   Use vim_strncpy() instead of strncpy().
+Files:	    src/pty.c
+
+
+*** ../vim-7.3.155/src/pty.c	2010-08-15 21:57:28.000000000 +0200
+--- src/pty.c	2011-04-11 14:02:49.000000000 +0200
+***************
+*** 209,216 ****
+  #ifdef _SEQUENT_
+      fvhangup(s);
+  #endif
+!     strncpy(PtyName, m, sizeof(PtyName));
+!     strncpy(TtyName, s, sizeof(TtyName));
+      initmaster(f);
+      *ttyn = TtyName;
+      return f;
+--- 209,216 ----
+  #ifdef _SEQUENT_
+      fvhangup(s);
+  #endif
+!     vim_strncpy((char_u *)PtyName, (char_u *)m, sizeof(PtyName) - 1);
+!     vim_strncpy((char_u *)TtyName, (char_u *)s, sizeof(TtyName) - 1);
+      initmaster(f);
+      *ttyn = TtyName;
+      return f;
+***************
+*** 301,307 ****
+  	return -1;
+      }
+      signal(SIGCHLD, sigcld);
+!     strncpy(TtyName, m, sizeof(TtyName));
+      initmaster(f);
+      *ttyn = TtyName;
+      return f;
+--- 301,307 ----
+  	return -1;
+      }
+      signal(SIGCHLD, sigcld);
+!     vim_strncpy((char_u *)TtyName, (char_u *)m, sizeof(TtyName) - 1);
+      initmaster(f);
+      *ttyn = TtyName;
+      return f;
+***************
+*** 326,332 ****
+      /* a dumb looking loop replaced by mycrofts code: */
+      if ((f = open("/dev/ptc", O_RDWR | O_NOCTTY | O_EXTRA)) < 0)
+  	return -1;
+!     strncpy(TtyName, ttyname(f), sizeof(TtyName));
+      if (geteuid() != ROOT_UID && mch_access(TtyName, R_OK | W_OK))
+      {
+  	close(f);
+--- 326,332 ----
+      /* a dumb looking loop replaced by mycrofts code: */
+      if ((f = open("/dev/ptc", O_RDWR | O_NOCTTY | O_EXTRA)) < 0)
+  	return -1;
+!     vim_strncpy((char_u *)TtyName, (char_u *)ttyname(f), sizeof(TtyName) - 1);
+      if (geteuid() != ROOT_UID && mch_access(TtyName, R_OK | W_OK))
+      {
+  	close(f);
+*** ../vim-7.3.155/src/version.c	2011-04-11 13:46:07.000000000 +0200
+--- src/version.c	2011-04-11 14:23:38.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     156,
+  /**/
+
+-- 
+I think that you'll agree that engineers are very effective in their social
+interactions.  It's the "normal" people who are nuts.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.157 b/source/ap/vim/patches/7.3.157
new file mode 100644
index 00000000..403c9486
--- /dev/null
+++ b/source/ap/vim/patches/7.3.157
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.157
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.157
+Problem:    Superfluous assignment.
+Solution:   Remove assignment.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.156/src/misc1.c	2011-03-22 13:07:19.000000000 +0100
+--- src/misc1.c	2011-04-11 14:11:17.000000000 +0200
+***************
+*** 6773,6780 ****
+  		{
+  		    curwin->w_cursor.lnum = our_paren_pos.lnum;
+  		    curwin->w_cursor.col = col;
+! 		    if ((trypos = find_match_paren(ind_maxparen,
+! 						     ind_maxcomment)) != NULL)
+  			amount += ind_unclosed2;
+  		    else
+  			amount += ind_unclosed;
+--- 6775,6781 ----
+  		{
+  		    curwin->w_cursor.lnum = our_paren_pos.lnum;
+  		    curwin->w_cursor.col = col;
+! 		    if (find_match_paren(ind_maxparen, ind_maxcomment) != NULL)
+  			amount += ind_unclosed2;
+  		    else
+  			amount += ind_unclosed;
+*** ../vim-7.3.156/src/version.c	2011-04-11 14:24:33.000000000 +0200
+--- src/version.c	2011-04-11 14:25:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     157,
+  /**/
+
+-- 
+A radioactive cat has eighteen half-lives.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.158 b/source/ap/vim/patches/7.3.158
new file mode 100644
index 00000000..8fba3508
--- /dev/null
+++ b/source/ap/vim/patches/7.3.158
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.158
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.158
+Problem:    Might use uninitialized memory in C indenting.
+Solution:   Init arrays to empty.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.157/src/misc1.c	2011-04-11 14:26:15.000000000 +0200
+--- src/misc1.c	2011-04-11 14:11:17.000000000 +0200
+***************
+*** 6433,6438 ****
+--- 6433,6440 ----
+  	/* find how indented the line beginning the comment is */
+  	getvcol(curwin, trypos, &col, NULL, NULL);
+  	amount = col;
++ 	*lead_start = NUL;
++ 	*lead_middle = NUL;
+  
+  	p = curbuf->b_p_com;
+  	while (*p != NUL)
+*** ../vim-7.3.157/src/version.c	2011-04-11 14:26:15.000000000 +0200
+--- src/version.c	2011-04-11 14:27:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     158,
+  /**/
+
+-- 
+It's totally unfair to suggest - as many have - that engineers are socially
+inept.  Engineers simply have different objectives when it comes to social
+interaction.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.159 b/source/ap/vim/patches/7.3.159
new file mode 100644
index 00000000..7029ac86
--- /dev/null
+++ b/source/ap/vim/patches/7.3.159
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.159
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.159
+Problem:    Using uninitialized pointer when out of memory.
+Solution:   Check for NULL return value.
+Files:	    src/mbyte.c
+
+
+*** ../vim-7.3.158/src/mbyte.c	2010-10-27 13:37:39.000000000 +0200
+--- src/mbyte.c	2011-04-11 14:17:39.000000000 +0200
+***************
+*** 4129,4135 ****
+  	done = to - (char *)result;
+      }
+  
+!     if (resultlenp != NULL)
+  	*resultlenp = (int)(to - (char *)result);
+      return result;
+  }
+--- 4129,4135 ----
+  	done = to - (char *)result;
+      }
+  
+!     if (resultlenp != NULL && result != NULL)
+  	*resultlenp = (int)(to - (char *)result);
+      return result;
+  }
+*** ../vim-7.3.158/src/version.c	2011-04-11 14:27:34.000000000 +0200
+--- src/version.c	2011-04-11 14:28:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     159,
+  /**/
+
+-- 
+I learned the customs and mannerisms of engineers by observing them, much the
+way Jane Goodall learned about the great apes, but without the hassle of
+grooming.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.160 b/source/ap/vim/patches/7.3.160
new file mode 100644
index 00000000..bf3a069f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.160
@@ -0,0 +1,482 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.160
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.160
+Problem:    Unsafe string copying.
+Solution:   Use vim_strncpy() instead of strcpy().  Use vim_strcat() instead
+	    of strcat().
+Files:	    src/buffer.c, src/ex_docmd.c, src/hardcopy.c, src/menu.c,
+	    src/misc1.c, src/misc2.c, src/proto/misc2.pro, src/netbeans.c,
+	    src/os_unix.c, src/spell.c, src/syntax.c, src/tag.c
+
+*** ../vim-7.3.159/src/buffer.c	2011-02-15 14:24:42.000000000 +0100
+--- src/buffer.c	2011-04-11 16:08:38.000000000 +0200
+***************
+*** 3176,3182 ****
+  	    /* format: "fname + (path) (1 of 2) - VIM" */
+  
+  	    if (curbuf->b_fname == NULL)
+! 		STRCPY(buf, _("[No Name]"));
+  	    else
+  	    {
+  		p = transstr(gettail(curbuf->b_fname));
+--- 3176,3182 ----
+  	    /* format: "fname + (path) (1 of 2) - VIM" */
+  
+  	    if (curbuf->b_fname == NULL)
+! 		vim_strncpy(buf, (char_u *)_("[No Name]"), IOSIZE - 100);
+  	    else
+  	    {
+  		p = transstr(gettail(curbuf->b_fname));
+***************
+*** 3232,3238 ****
+  	    if (serverName != NULL)
+  	    {
+  		STRCAT(buf, " - ");
+! 		STRCAT(buf, serverName);
+  	    }
+  	    else
+  #endif
+--- 3232,3238 ----
+  	    if (serverName != NULL)
+  	    {
+  		STRCAT(buf, " - ");
+! 		vim_strcat(buf, serverName, IOSIZE);
+  	    }
+  	    else
+  #endif
+*** ../vim-7.3.159/src/ex_docmd.c	2011-03-03 15:54:45.000000000 +0100
+--- src/ex_docmd.c	2011-04-11 15:43:48.000000000 +0200
+***************
+*** 5096,5102 ****
+  		char_u	buff[IOSIZE];
+  
+  		if (n == 1)
+! 		    STRCPY(buff, _("1 more file to edit.  Quit anyway?"));
+  		else
+  		    vim_snprintf((char *)buff, IOSIZE,
+  			      _("%d more files to edit.  Quit anyway?"), n);
+--- 5096,5104 ----
+  		char_u	buff[IOSIZE];
+  
+  		if (n == 1)
+! 		    vim_strncpy(buff,
+! 			    (char_u *)_("1 more file to edit.  Quit anyway?"),
+! 								  IOSIZE - 1);
+  		else
+  		    vim_snprintf((char *)buff, IOSIZE,
+  			      _("%d more files to edit.  Quit anyway?"), n);
+*** ../vim-7.3.159/src/hardcopy.c	2010-08-15 21:57:25.000000000 +0200
+--- src/hardcopy.c	2011-04-11 15:30:09.000000000 +0200
+***************
+*** 1761,1772 ****
+  {
+      char_u	buffer[MAXPATHL + 1];
+  
+!     STRCPY(resource->name, name);
+      /* Look for named resource file in runtimepath */
+      STRCPY(buffer, "print");
+      add_pathsep(buffer);
+!     STRCAT(buffer, name);
+!     STRCAT(buffer, ".ps");
+      resource->filename[0] = NUL;
+      return (do_in_runtimepath(buffer, FALSE, prt_resource_name,
+  							   resource->filename)
+--- 1761,1772 ----
+  {
+      char_u	buffer[MAXPATHL + 1];
+  
+!     vim_strncpy(resource->name, (char_u *)name, 63);
+      /* Look for named resource file in runtimepath */
+      STRCPY(buffer, "print");
+      add_pathsep(buffer);
+!     vim_strcat(buffer, (char_u *)name, MAXPATHL);
+!     vim_strcat(buffer, (char_u *)".ps", MAXPATHL);
+      resource->filename[0] = NUL;
+      return (do_in_runtimepath(buffer, FALSE, prt_resource_name,
+  							   resource->filename)
+*** ../vim-7.3.159/src/menu.c	2011-01-04 17:49:25.000000000 +0100
+--- src/menu.c	2011-04-11 15:17:21.000000000 +0200
+***************
+*** 1394,1400 ****
+      int		idx;
+  {
+      static vimmenu_T	*menu = NULL;
+!     static char_u	tbuffer[256]; /*hack*/
+      char_u		*str;
+  #ifdef FEAT_MULTI_LANG
+      static  int		should_advance = FALSE;
+--- 1394,1401 ----
+      int		idx;
+  {
+      static vimmenu_T	*menu = NULL;
+! #define TBUFFER_LEN 256
+!     static char_u	tbuffer[TBUFFER_LEN]; /*hack*/
+      char_u		*str;
+  #ifdef FEAT_MULTI_LANG
+      static  int		should_advance = FALSE;
+***************
+*** 1428,1438 ****
+  	{
+  #ifdef FEAT_MULTI_LANG
+  	    if (should_advance)
+! 		STRCPY(tbuffer, menu->en_dname);
+  	    else
+  	    {
+  #endif
+! 		STRCPY(tbuffer, menu->dname);
+  #ifdef FEAT_MULTI_LANG
+  		if (menu->en_dname == NULL)
+  		    should_advance = TRUE;
+--- 1429,1439 ----
+  	{
+  #ifdef FEAT_MULTI_LANG
+  	    if (should_advance)
+! 		vim_strncpy(tbuffer, menu->en_dname, TBUFFER_LEN - 2);
+  	    else
+  	    {
+  #endif
+! 		vim_strncpy(tbuffer, menu->dname,  TBUFFER_LEN - 2);
+  #ifdef FEAT_MULTI_LANG
+  		if (menu->en_dname == NULL)
+  		    should_advance = TRUE;
+*** ../vim-7.3.159/src/misc1.c	2011-04-11 14:27:34.000000000 +0200
+--- src/misc1.c	2011-04-11 16:03:22.000000000 +0200
+***************
+*** 3332,3350 ****
+  	if (pn == 1)
+  	{
+  	    if (n > 0)
+! 		STRCPY(msg_buf, _("1 more line"));
+  	    else
+! 		STRCPY(msg_buf, _("1 line less"));
+  	}
+  	else
+  	{
+  	    if (n > 0)
+! 		sprintf((char *)msg_buf, _("%ld more lines"), pn);
+  	    else
+! 		sprintf((char *)msg_buf, _("%ld fewer lines"), pn);
+  	}
+  	if (got_int)
+! 	    STRCAT(msg_buf, _(" (Interrupted)"));
+  	if (msg(msg_buf))
+  	{
+  	    set_keep_msg(msg_buf, 0);
+--- 3332,3354 ----
+  	if (pn == 1)
+  	{
+  	    if (n > 0)
+! 		vim_strncpy(msg_buf, (char_u *)_("1 more line"),
+! 							     MSG_BUF_LEN - 1);
+  	    else
+! 		vim_strncpy(msg_buf, (char_u *)_("1 line less"),
+! 							     MSG_BUF_LEN - 1);
+  	}
+  	else
+  	{
+  	    if (n > 0)
+! 		vim_snprintf((char *)msg_buf, MSG_BUF_LEN,
+! 						     _("%ld more lines"), pn);
+  	    else
+! 		vim_snprintf((char *)msg_buf, MSG_BUF_LEN,
+! 						    _("%ld fewer lines"), pn);
+  	}
+  	if (got_int)
+! 	    vim_strcat(msg_buf, (char_u *)_(" (Interrupted)"), MSG_BUF_LEN);
+  	if (msg(msg_buf))
+  	{
+  	    set_keep_msg(msg_buf, 0);
+*** ../vim-7.3.159/src/misc2.c	2010-12-08 13:11:15.000000000 +0100
+--- src/misc2.c	2011-04-11 15:30:20.000000000 +0200
+***************
+*** 1647,1652 ****
+--- 1647,1674 ----
+  }
+  
+  /*
++  * Like strcat(), but make sure the result fits in "tosize" bytes and is
++  * always NUL terminated.
++  */
++     void
++ vim_strcat(to, from, tosize)
++     char_u	*to;
++     char_u	*from;
++     size_t	tosize;
++ {
++     size_t tolen = STRLEN(to);
++     size_t fromlen = STRLEN(from);
++ 
++     if (tolen + fromlen + 1 > tosize)
++     {
++ 	mch_memmove(to + tolen, from, tosize - tolen - 1);
++ 	to[tosize - 1] = NUL;
++     }
++     else
++ 	STRCPY(to + tolen, from);
++ }
++ 
++ /*
+   * Isolate one part of a string option where parts are separated with
+   * "sep_chars".
+   * The part is copied into "buf[maxlen]".
+*** ../vim-7.3.159/src/proto/misc2.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/misc2.pro	2011-04-11 15:29:55.000000000 +0200
+***************
+*** 40,45 ****
+--- 40,46 ----
+  void copy_chars __ARGS((char_u *ptr, size_t count, int c));
+  void del_trailing_spaces __ARGS((char_u *ptr));
+  void vim_strncpy __ARGS((char_u *to, char_u *from, size_t len));
++ void vim_strcat __ARGS((char_u *to, char_u *from, size_t tosize));
+  int copy_option_part __ARGS((char_u **option, char_u *buf, int maxlen, char *sep_chars));
+  void vim_free __ARGS((void *x));
+  int vim_stricmp __ARGS((char *s1, char *s2));
+*** ../vim-7.3.159/src/netbeans.c	2011-04-01 15:33:54.000000000 +0200
+--- src/netbeans.c	2011-04-11 16:02:51.000000000 +0200
+***************
+*** 3914,3927 ****
+      }
+      else
+      {
+! 	char_u ebuf[BUFSIZ];
+  
+! 	STRCPY(ebuf, (char_u *)_("E505: "));
+! 	STRCAT(ebuf, IObuff);
+! 	STRCAT(ebuf, (char_u *)_("is read-only (add ! to override)"));
+! 	STRCPY(IObuff, ebuf);
+! 	nbdebug(("    %s\n", ebuf ));
+! 	emsg(IObuff);
+      }
+  }
+  
+--- 3914,3925 ----
+      }
+      else
+      {
+! 	char_u msgbuf[IOSIZE];
+  
+! 	vim_snprintf((char *)msgbuf, IOSIZE,
+! 		_("E505: %s is read-only (add ! to override)"), IObuff);
+! 	nbdebug(("    %s\n", msgbuf));
+! 	emsg(msgbuf);
+      }
+  }
+  
+*** ../vim-7.3.159/src/os_unix.c	2011-02-15 17:39:14.000000000 +0100
+--- src/os_unix.c	2011-04-11 16:39:11.000000000 +0200
+***************
+*** 5725,5730 ****
+--- 5725,5731 ----
+  	if (shell_style == STYLE_PRINT && !did_find_nul)
+  	{
+  	    /* If there is a NUL, set did_find_nul, else set check_spaces */
++ 	    buffer[len] = NUL;
+  	    if (len && (int)STRLEN(buffer) < (int)len - 1)
+  		did_find_nul = TRUE;
+  	    else
+***************
+*** 6594,6600 ****
+  	    xterm_hints.x = 2;
+  	return TRUE;
+      }
+!     if (mouse_code == NULL)
+      {
+  	xterm_trace = 0;
+  	return FALSE;
+--- 6595,6601 ----
+  	    xterm_hints.x = 2;
+  	return TRUE;
+      }
+!     if (mouse_code == NULL || STRLEN(mouse_code) > 45)
+      {
+  	xterm_trace = 0;
+  	return FALSE;
+*** ../vim-7.3.159/src/spell.c	2011-02-01 13:59:44.000000000 +0100
+--- src/spell.c	2011-04-11 15:50:40.000000000 +0200
+***************
+*** 6957,6963 ****
+  			    if (ae->ae_add == NULL)
+  				*newword = NUL;
+  			    else
+! 				STRCPY(newword, ae->ae_add);
+  			    p = word;
+  			    if (ae->ae_chop != NULL)
+  			    {
+--- 6957,6963 ----
+  			    if (ae->ae_add == NULL)
+  				*newword = NUL;
+  			    else
+! 				vim_strncpy(newword, ae->ae_add, MAXWLEN - 1);
+  			    p = word;
+  			    if (ae->ae_chop != NULL)
+  			    {
+***************
+*** 6978,6984 ****
+  			else
+  			{
+  			    /* suffix: chop/add at the end of the word */
+! 			    STRCPY(newword, word);
+  			    if (ae->ae_chop != NULL)
+  			    {
+  				/* Remove chop string. */
+--- 6978,6984 ----
+  			else
+  			{
+  			    /* suffix: chop/add at the end of the word */
+! 			    vim_strncpy(newword, word, MAXWLEN - 1);
+  			    if (ae->ae_chop != NULL)
+  			    {
+  				/* Remove chop string. */
+***************
+*** 8654,8660 ****
+       * Write the .sug file.
+       * Make the file name by changing ".spl" to ".sug".
+       */
+!     STRCPY(fname, wfname);
+      len = (int)STRLEN(fname);
+      fname[len - 2] = 'u';
+      fname[len - 1] = 'g';
+--- 8654,8660 ----
+       * Write the .sug file.
+       * Make the file name by changing ".spl" to ".sug".
+       */
+!     vim_strncpy(fname, wfname, MAXPATHL - 1);
+      len = (int)STRLEN(fname);
+      fname[len - 2] = 'u';
+      fname[len - 1] = 'g';
+***************
+*** 10261,10267 ****
+  
+  	    /* The suggested word may replace only part of the bad word, add
+  	     * the not replaced part. */
+! 	    STRCPY(wcopy, stp->st_word);
+  	    if (sug.su_badlen > stp->st_orglen)
+  		vim_strncpy(wcopy + stp->st_wordlen,
+  					       sug.su_badptr + stp->st_orglen,
+--- 10261,10267 ----
+  
+  	    /* The suggested word may replace only part of the bad word, add
+  	     * the not replaced part. */
+! 	    vim_strncpy(wcopy, stp->st_word, MAXWLEN);
+  	    if (sug.su_badlen > stp->st_orglen)
+  		vim_strncpy(wcopy + stp->st_wordlen,
+  					       sug.su_badptr + stp->st_orglen,
+***************
+*** 13162,13168 ****
+  	pbad = badsound2;
+      }
+  
+!     if (lendiff > 0)
+      {
+  	/* Add part of the bad word to the good word, so that we soundfold
+  	 * what replaces the bad word. */
+--- 13162,13168 ----
+  	pbad = badsound2;
+      }
+  
+!     if (lendiff > 0 && stp->st_wordlen + lendiff < MAXWLEN)
+      {
+  	/* Add part of the bad word to the good word, so that we soundfold
+  	 * what replaces the bad word. */
+***************
+*** 13875,13881 ****
+      for (i = gap->ga_len - 1; i >= 0; --i)
+      {
+  	/* Need to append what follows to check for "the the". */
+! 	STRCPY(longword, stp[i].st_word);
+  	len = stp[i].st_wordlen;
+  	vim_strncpy(longword + len, su->su_badptr + stp[i].st_orglen,
+  							       MAXWLEN - len);
+--- 13875,13881 ----
+      for (i = gap->ga_len - 1; i >= 0; --i)
+      {
+  	/* Need to append what follows to check for "the the". */
+! 	vim_strncpy(longword, stp[i].st_word, MAXWLEN);
+  	len = stp[i].st_wordlen;
+  	vim_strncpy(longword + len, su->su_badptr + stp[i].st_orglen,
+  							       MAXWLEN - len);
+***************
+*** 14221,14227 ****
+  	*t = NUL;
+      }
+      else
+! 	STRCPY(word, s);
+  
+      smp = (salitem_T *)slang->sl_sal.ga_data;
+  
+--- 14221,14227 ----
+  	*t = NUL;
+      }
+      else
+! 	vim_strncpy(word, s, MAXWLEN - 1);
+  
+      smp = (salitem_T *)slang->sl_sal.ga_data;
+  
+*** ../vim-7.3.159/src/syntax.c	2011-04-02 15:12:45.000000000 +0200
+--- src/syntax.c	2011-04-11 15:44:30.000000000 +0200
+***************
+*** 8576,8583 ****
+  		if (iarg & hl_attr_table[i])
+  		{
+  		    if (buf[0] != NUL)
+! 			STRCAT(buf, ",");
+! 		    STRCAT(buf, hl_name_table[i]);
+  		    iarg &= ~hl_attr_table[i];	    /* don't want "inverse" */
+  		}
+  	    }
+--- 8576,8583 ----
+  		if (iarg & hl_attr_table[i])
+  		{
+  		    if (buf[0] != NUL)
+! 			vim_strcat(buf, (char_u *)",", 100);
+! 		    vim_strcat(buf, (char_u *)hl_name_table[i], 100);
+  		    iarg &= ~hl_attr_table[i];	    /* don't want "inverse" */
+  		}
+  	    }
+*** ../vim-7.3.159/src/tag.c	2011-02-25 15:13:43.000000000 +0100
+--- src/tag.c	2011-04-11 15:34:59.000000000 +0200
+***************
+*** 806,812 ****
+  		    p = tag_full_fname(&tagp);
+  		    if (p == NULL)
+  			continue;
+! 		    STRCPY(fname, p);
+  		    vim_free(p);
+  
+  		    /*
+--- 806,812 ----
+  		    p = tag_full_fname(&tagp);
+  		    if (p == NULL)
+  			continue;
+! 		    vim_strncpy(fname, p, MAXPATHL);
+  		    vim_free(p);
+  
+  		    /*
+*** ../vim-7.3.159/src/version.c	2011-04-11 14:29:13.000000000 +0200
+--- src/version.c	2011-04-11 16:50:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     160,
+  /**/
+
+-- 
+If someone questions your market projections, simply point out that your
+target market is "People who are nuts" and "People who will buy any damn
+thing".  Nobody is going to tell you there aren't enough of those people
+to go around.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.161 b/source/ap/vim/patches/7.3.161
new file mode 100644
index 00000000..61223ec2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.161
@@ -0,0 +1,1645 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.161
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.161
+Problem:    Items on the stack may be too big.
+Solution:   Make items static or allocate them.
+Files:	    src/eval.c, src/ex_cmds.c, src/ex_cmds2.c, src/ex_docmd.c,
+	    src/fileio.c, src/hardcopy.c, src/quickfix.c, src/main.c,
+	    src/netbeans.c, src/spell.c, src/tag.c, src/vim.h, src/xxd/xxd.c
+
+
+*** ../vim-7.3.160/src/eval.c	2011-04-11 13:46:07.000000000 +0200
+--- src/eval.c	2011-04-11 21:05:50.000000000 +0200
+***************
+*** 11100,11117 ****
+      typval_T	*argvars UNUSED;
+      typval_T	*rettv;
+  {
+!     char_u	cwd[MAXPATHL];
+  
+      rettv->v_type = VAR_STRING;
+!     if (mch_dirname(cwd, MAXPATHL) == FAIL)
+! 	rettv->vval.v_string = NULL;
+!     else
+      {
+! 	rettv->vval.v_string = vim_strsave(cwd);
+  #ifdef BACKSLASH_IN_FILENAME
+! 	if (rettv->vval.v_string != NULL)
+! 	    slash_adjust(rettv->vval.v_string);
+  #endif
+      }
+  }
+  
+--- 11100,11121 ----
+      typval_T	*argvars UNUSED;
+      typval_T	*rettv;
+  {
+!     char_u	*cwd;
+  
+      rettv->v_type = VAR_STRING;
+!     rettv->vval.v_string = NULL;
+!     cwd = alloc(MAXPATHL);
+!     if (cwd != NULL)
+      {
+! 	if (mch_dirname(cwd, MAXPATHL) != FAIL)
+! 	{
+! 	    rettv->vval.v_string = vim_strsave(cwd);
+  #ifdef BACKSLASH_IN_FILENAME
+! 	    if (rettv->vval.v_string != NULL)
+! 		slash_adjust(rettv->vval.v_string);
+  #endif
++ 	}
++ 	vim_free(cwd);
+      }
+  }
+  
+***************
+*** 14938,14943 ****
+--- 14942,14950 ----
+      typval_T	*rettv;
+  {
+      char_u	*p;
++ #ifdef HAVE_READLINK
++     char_u	*buf = NULL;
++ #endif
+  
+      p = get_tv_string(&argvars[0]);
+  #ifdef FEAT_SHORTCUT
+***************
+*** 14953,14959 ****
+  #else
+  # ifdef HAVE_READLINK
+      {
+- 	char_u	buf[MAXPATHL + 1];
+  	char_u	*cpy;
+  	int	len;
+  	char_u	*remain = NULL;
+--- 14960,14965 ----
+***************
+*** 14981,14986 ****
+--- 14987,14996 ----
+  	    q[-1] = NUL;
+  	}
+  
++ 	buf = alloc(MAXPATHL + 1);
++ 	if (buf == NULL)
++ 	    goto fail;
++ 
+  	for (;;)
+  	{
+  	    for (;;)
+***************
+*** 15124,15129 ****
+--- 15134,15140 ----
+  
+  #ifdef HAVE_READLINK
+  fail:
++     vim_free(buf);
+  #endif
+      rettv->v_type = VAR_STRING;
+  }
+***************
+*** 17604,17621 ****
+      typval_T	*argvars UNUSED;
+      typval_T	*rettv;
+  {
+!     char_u	fname[MAXPATHL + 1];
+      tagname_T	tn;
+      int		first;
+  
+      if (rettv_list_alloc(rettv) == FAIL)
+  	return;
+  
+      for (first = TRUE; ; first = FALSE)
+  	if (get_tagfname(&tn, first, fname) == FAIL
+  		|| list_append_string(rettv->vval.v_list, fname, -1) == FAIL)
+  	    break;
+      tagname_free(&tn);
+  }
+  
+  /*
+--- 17615,17636 ----
+      typval_T	*argvars UNUSED;
+      typval_T	*rettv;
+  {
+!     char_u	*fname;
+      tagname_T	tn;
+      int		first;
+  
+      if (rettv_list_alloc(rettv) == FAIL)
+  	return;
++     fname = alloc(MAXPATHL);
++     if (fname == NULL)
++ 	return;
+  
+      for (first = TRUE; ; first = FALSE)
+  	if (get_tagfname(&tn, first, fname) == FAIL
+  		|| list_append_string(rettv->vval.v_list, fname, -1) == FAIL)
+  	    break;
+      tagname_free(&tn);
++     vim_free(fname);
+  }
+  
+  /*
+*** ../vim-7.3.160/src/ex_cmds.c	2011-02-01 13:48:47.000000000 +0100
+--- src/ex_cmds.c	2011-04-11 20:51:34.000000000 +0200
+***************
+*** 2777,2783 ****
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	    if (p_confirm || cmdmod.confirm)
+  	    {
+! 		char_u	buff[IOSIZE];
+  
+  		dialog_msg(buff, _("Overwrite existing file \"%s\"?"), fname);
+  		if (vim_dialog_yesno(VIM_QUESTION, NULL, buff, 2) != VIM_YES)
+--- 2777,2783 ----
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	    if (p_confirm || cmdmod.confirm)
+  	    {
+! 		char_u	buff[DIALOG_MSG_SIZE];
+  
+  		dialog_msg(buff, _("Overwrite existing file \"%s\"?"), fname);
+  		if (vim_dialog_yesno(VIM_QUESTION, NULL, buff, 2) != VIM_YES)
+***************
+*** 2795,2801 ****
+  	/* For ":w! filename" check that no swap file exists for "filename". */
+  	if (other && !emsg_silent)
+  	{
+! 	    char_u	dir[MAXPATHL];
+  	    char_u	*p;
+  	    int		r;
+  	    char_u	*swapname;
+--- 2795,2801 ----
+  	/* For ":w! filename" check that no swap file exists for "filename". */
+  	if (other && !emsg_silent)
+  	{
+! 	    char_u	*dir;
+  	    char_u	*p;
+  	    int		r;
+  	    char_u	*swapname;
+***************
+*** 2806,2825 ****
+  	     * Use 'shortname' of the current buffer, since there is no buffer
+  	     * for the written file. */
+  	    if (*p_dir == NUL)
+  		STRCPY(dir, ".");
+  	    else
+  	    {
+  		p = p_dir;
+  		copy_option_part(&p, dir, MAXPATHL, ",");
+  	    }
+  	    swapname = makeswapname(fname, ffname, curbuf, dir);
+  	    r = vim_fexists(swapname);
+  	    if (r)
+  	    {
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  		if (p_confirm || cmdmod.confirm)
+  		{
+! 		    char_u	buff[IOSIZE];
+  
+  		    dialog_msg(buff,
+  			    _("Swap file \"%s\" exists, overwrite anyway?"),
+--- 2806,2834 ----
+  	     * Use 'shortname' of the current buffer, since there is no buffer
+  	     * for the written file. */
+  	    if (*p_dir == NUL)
++ 	    {
++ 		dir = alloc(5);
++ 		if (dir == NULL)
++ 		    return FAIL;
+  		STRCPY(dir, ".");
++ 	    }
+  	    else
+  	    {
++ 		dir = alloc(MAXPATHL);
++ 		if (dir == NULL)
++ 		    return FAIL;
+  		p = p_dir;
+  		copy_option_part(&p, dir, MAXPATHL, ",");
+  	    }
+  	    swapname = makeswapname(fname, ffname, curbuf, dir);
++ 	    vim_free(dir);
+  	    r = vim_fexists(swapname);
+  	    if (r)
+  	    {
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  		if (p_confirm || cmdmod.confirm)
+  		{
+! 		    char_u	buff[DIALOG_MSG_SIZE];
+  
+  		    dialog_msg(buff,
+  			    _("Swap file \"%s\" exists, overwrite anyway?"),
+***************
+*** 2969,2975 ****
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	if ((p_confirm || cmdmod.confirm) && buf->b_fname != NULL)
+  	{
+! 	    char_u	buff[IOSIZE];
+  
+  	    if (buf->b_p_ro)
+  		dialog_msg(buff, _("'readonly' option is set for \"%s\".\nDo you wish to write anyway?"),
+--- 2978,2984 ----
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	if ((p_confirm || cmdmod.confirm) && buf->b_fname != NULL)
+  	{
+! 	    char_u	buff[DIALOG_MSG_SIZE];
+  
+  	    if (buf->b_p_ro)
+  		dialog_msg(buff, _("'readonly' option is set for \"%s\".\nDo you wish to write anyway?"),
+*** ../vim-7.3.160/src/ex_cmds2.c	2011-02-25 14:46:06.000000000 +0100
+--- src/ex_cmds2.c	2011-04-11 20:51:40.000000000 +0200
+***************
+*** 1492,1498 ****
+      buf_T	*buf;
+      int		checkall;	/* may abandon all changed buffers */
+  {
+!     char_u	buff[IOSIZE];
+      int		ret;
+      buf_T	*buf2;
+  
+--- 1492,1498 ----
+      buf_T	*buf;
+      int		checkall;	/* may abandon all changed buffers */
+  {
+!     char_u	buff[DIALOG_MSG_SIZE];
+      int		ret;
+      buf_T	*buf2;
+  
+*** ../vim-7.3.160/src/ex_docmd.c	2011-04-11 16:56:29.000000000 +0200
+--- src/ex_docmd.c	2011-04-11 21:20:35.000000000 +0200
+***************
+*** 5093,5106 ****
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	    if ((p_confirm || cmdmod.confirm) && curbuf->b_fname != NULL)
+  	    {
+! 		char_u	buff[IOSIZE];
+  
+  		if (n == 1)
+  		    vim_strncpy(buff,
+  			    (char_u *)_("1 more file to edit.  Quit anyway?"),
+! 								  IOSIZE - 1);
+  		else
+! 		    vim_snprintf((char *)buff, IOSIZE,
+  			      _("%d more files to edit.  Quit anyway?"), n);
+  		if (vim_dialog_yesno(VIM_QUESTION, NULL, buff, 1) == VIM_YES)
+  		    return OK;
+--- 5093,5106 ----
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+  	    if ((p_confirm || cmdmod.confirm) && curbuf->b_fname != NULL)
+  	    {
+! 		char_u	buff[DIALOG_MSG_SIZE];
+  
+  		if (n == 1)
+  		    vim_strncpy(buff,
+  			    (char_u *)_("1 more file to edit.  Quit anyway?"),
+! 							 DIALOG_MSG_SIZE - 1);
+  		else
+! 		    vim_snprintf((char *)buff, DIALOG_MSG_SIZE,
+  			      _("%d more files to edit.  Quit anyway?"), n);
+  		if (vim_dialog_yesno(VIM_QUESTION, NULL, buff, 1) == VIM_YES)
+  		    return OK;
+***************
+*** 8926,8960 ****
+  		failed = TRUE;
+  	    if (eap->cmdidx == CMD_mksession)
+  	    {
+! 		char_u dirnow[MAXPATHL];	/* current directory */
+  
+! 		/*
+! 		 * Change to session file's dir.
+! 		 */
+! 		if (mch_dirname(dirnow, MAXPATHL) == FAIL
+! 					    || mch_chdir((char *)dirnow) != 0)
+! 		    *dirnow = NUL;
+! 		if (*dirnow != NUL && (ssop_flags & SSOP_SESDIR))
+! 		{
+! 		    if (vim_chdirfile(fname) == OK)
+! 			shorten_fnames(TRUE);
+! 		}
+! 		else if (*dirnow != NUL
+! 			&& (ssop_flags & SSOP_CURDIR) && globaldir != NULL)
+  		{
+! 		    if (mch_chdir((char *)globaldir) == 0)
+! 			shorten_fnames(TRUE);
+! 		}
+  
+! 		failed |= (makeopens(fd, dirnow) == FAIL);
+  
+! 		/* restore original dir */
+! 		if (*dirnow != NUL && ((ssop_flags & SSOP_SESDIR)
+  			|| ((ssop_flags & SSOP_CURDIR) && globaldir != NULL)))
+! 		{
+! 		    if (mch_chdir((char *)dirnow) != 0)
+! 			EMSG(_(e_prev_dir));
+! 		    shorten_fnames(TRUE);
+  		}
+  	    }
+  	    else
+--- 8926,8967 ----
+  		failed = TRUE;
+  	    if (eap->cmdidx == CMD_mksession)
+  	    {
+! 		char_u *dirnow;	 /* current directory */
+  
+! 		dirnow = alloc(MAXPATHL);
+! 		if (dirnow == NULL)
+! 		    failed = TRUE;
+! 		else
+  		{
+! 		    /*
+! 		     * Change to session file's dir.
+! 		     */
+! 		    if (mch_dirname(dirnow, MAXPATHL) == FAIL
+! 					    || mch_chdir((char *)dirnow) != 0)
+! 			*dirnow = NUL;
+! 		    if (*dirnow != NUL && (ssop_flags & SSOP_SESDIR))
+! 		    {
+! 			if (vim_chdirfile(fname) == OK)
+! 			    shorten_fnames(TRUE);
+! 		    }
+! 		    else if (*dirnow != NUL
+! 			   && (ssop_flags & SSOP_CURDIR) && globaldir != NULL)
+! 		    {
+! 			if (mch_chdir((char *)globaldir) == 0)
+! 			    shorten_fnames(TRUE);
+! 		    }
+  
+! 		    failed |= (makeopens(fd, dirnow) == FAIL);
+  
+! 		    /* restore original dir */
+! 		    if (*dirnow != NUL && ((ssop_flags & SSOP_SESDIR)
+  			|| ((ssop_flags & SSOP_CURDIR) && globaldir != NULL)))
+! 		    {
+! 			if (mch_chdir((char *)dirnow) != 0)
+! 			    EMSG(_(e_prev_dir));
+! 			shorten_fnames(TRUE);
+! 		    }
+! 		    vim_free(dirnow);
+  		}
+  	    }
+  	    else
+***************
+*** 8985,8994 ****
+  	else if (eap->cmdidx == CMD_mksession)
+  	{
+  	    /* successful session write - set this_session var */
+! 	    char_u	tbuf[MAXPATHL];
+  
+! 	    if (vim_FullName(fname, tbuf, MAXPATHL, FALSE) == OK)
+! 		set_vim_var_string(VV_THIS_SESSION, tbuf, -1);
+  	}
+  #endif
+  #ifdef MKSESSION_NL
+--- 8992,9006 ----
+  	else if (eap->cmdidx == CMD_mksession)
+  	{
+  	    /* successful session write - set this_session var */
+! 	    char_u	*tbuf;
+  
+! 	    tbuf = alloc(MAXPATHL);
+! 	    if (tbuf != NULL)
+! 	    {
+! 		if (vim_FullName(fname, tbuf, MAXPATHL, FALSE) == OK)
+! 		    set_vim_var_string(VV_THIS_SESSION, tbuf, -1);
+! 		vim_free(tbuf);
+! 	    }
+  	}
+  #endif
+  #ifdef MKSESSION_NL
+***************
+*** 10677,10683 ****
+      unsigned	*flagp;
+  {
+      int		i;
+!     char_u	buf[MAXPATHL];
+      char_u	*s;
+  
+      if (gap->ga_len == 0)
+--- 10689,10695 ----
+      unsigned	*flagp;
+  {
+      int		i;
+!     char_u	*buf = NULL;
+      char_u	*s;
+  
+      if (gap->ga_len == 0)
+***************
+*** 10692,10702 ****
+  	{
+  	    if (fullname)
+  	    {
+! 		(void)vim_FullName(s, buf, MAXPATHL, FALSE);
+! 		s = buf;
+  	    }
+  	    if (fputs(" ", fd) < 0 || ses_put_fname(fd, s, flagp) == FAIL)
+  		return FAIL;
+  	}
+      }
+      return put_eol(fd);
+--- 10704,10722 ----
+  	{
+  	    if (fullname)
+  	    {
+! 		buf = alloc(MAXPATHL);
+! 		if (buf != NULL)
+! 		{
+! 		    (void)vim_FullName(s, buf, MAXPATHL, FALSE);
+! 		    s = buf;
+! 		}
+  	    }
+  	    if (fputs(" ", fd) < 0 || ses_put_fname(fd, s, flagp) == FAIL)
++ 	    {
++ 		vim_free(buf);
+  		return FAIL;
++ 	    }
++ 	    vim_free(buf);
+  	}
+      }
+      return put_eol(fd);
+***************
+*** 10925,10931 ****
+  
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG) || defined(PROTO)
+  /*
+!  * Make a dialog message in "buff[IOSIZE]".
+   * "format" must contain "%s".
+   */
+      void
+--- 10945,10951 ----
+  
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG) || defined(PROTO)
+  /*
+!  * Make a dialog message in "buff[DIALOG_MSG_SIZE]".
+   * "format" must contain "%s".
+   */
+      void
+***************
+*** 10936,10942 ****
+  {
+      if (fname == NULL)
+  	fname = (char_u *)_("Untitled");
+!     vim_snprintf((char *)buff, IOSIZE, format, fname);
+  }
+  #endif
+  
+--- 10956,10962 ----
+  {
+      if (fname == NULL)
+  	fname = (char_u *)_("Untitled");
+!     vim_snprintf((char *)buff, DIALOG_MSG_SIZE, format, fname);
+  }
+  #endif
+  
+*** ../vim-7.3.160/src/fileio.c	2011-02-25 16:52:13.000000000 +0100
+--- src/fileio.c	2011-04-11 18:35:10.000000000 +0200
+***************
+*** 6023,6037 ****
+  shorten_fname1(full_path)
+      char_u	*full_path;
+  {
+!     char_u	dirname[MAXPATHL];
+      char_u	*p = full_path;
+  
+      if (mch_dirname(dirname, MAXPATHL) == OK)
+      {
+  	p = shorten_fname(full_path, dirname);
+  	if (p == NULL || *p == NUL)
+  	    p = full_path;
+      }
+      return p;
+  }
+  #endif
+--- 6023,6041 ----
+  shorten_fname1(full_path)
+      char_u	*full_path;
+  {
+!     char_u	*dirname;
+      char_u	*p = full_path;
+  
++     dirname = alloc(MAXPATHL);
++     if (dirname == NULL)
++ 	return full_path;
+      if (mch_dirname(dirname, MAXPATHL) == OK)
+      {
+  	p = shorten_fname(full_path, dirname);
+  	if (p == NULL || *p == NUL)
+  	    p = full_path;
+      }
++     vim_free(dirname);
+      return p;
+  }
+  #endif
+*** ../vim-7.3.160/src/hardcopy.c	2011-04-11 16:56:29.000000000 +0200
+--- src/hardcopy.c	2011-04-11 18:23:38.000000000 +0200
+***************
+*** 1759,1765 ****
+      char	*name;
+      struct prt_ps_resource_S *resource;
+  {
+!     char_u	buffer[MAXPATHL + 1];
+  
+      vim_strncpy(resource->name, (char_u *)name, 63);
+      /* Look for named resource file in runtimepath */
+--- 1759,1770 ----
+      char	*name;
+      struct prt_ps_resource_S *resource;
+  {
+!     char_u	*buffer;
+!     int		retval;
+! 
+!     buffer = alloc(MAXPATHL + 1);
+!     if (buffer == NULL)
+! 	return FALSE;
+  
+      vim_strncpy(resource->name, (char_u *)name, 63);
+      /* Look for named resource file in runtimepath */
+***************
+*** 1768,1776 ****
+      vim_strcat(buffer, (char_u *)name, MAXPATHL);
+      vim_strcat(buffer, (char_u *)".ps", MAXPATHL);
+      resource->filename[0] = NUL;
+!     return (do_in_runtimepath(buffer, FALSE, prt_resource_name,
+  							   resource->filename)
+  	    && resource->filename[0] != NUL);
+  }
+  
+  /* PS CR and LF characters have platform independent values */
+--- 1773,1783 ----
+      vim_strcat(buffer, (char_u *)name, MAXPATHL);
+      vim_strcat(buffer, (char_u *)".ps", MAXPATHL);
+      resource->filename[0] = NUL;
+!     retval = (do_in_runtimepath(buffer, FALSE, prt_resource_name,
+  							   resource->filename)
+  	    && resource->filename[0] != NUL);
++     vim_free(buffer);
++     return retval;
+  }
+  
+  /* PS CR and LF characters have platform independent values */
+***************
+*** 2848,2862 ****
+      double      right;
+      double      top;
+      double      bottom;
+!     struct prt_ps_resource_S res_prolog;
+!     struct prt_ps_resource_S res_encoding;
+      char	buffer[256];
+      char_u      *p_encoding;
+      char_u	*p;
+  #ifdef FEAT_MBYTE
+!     struct prt_ps_resource_S res_cidfont;
+!     struct prt_ps_resource_S res_cmap;
+  #endif
+  
+      /*
+       * PS DSC Header comments - no PS code!
+--- 2855,2887 ----
+      double      right;
+      double      top;
+      double      bottom;
+!     struct prt_ps_resource_S *res_prolog;
+!     struct prt_ps_resource_S *res_encoding;
+      char	buffer[256];
+      char_u      *p_encoding;
+      char_u	*p;
+  #ifdef FEAT_MBYTE
+!     struct prt_ps_resource_S *res_cidfont;
+!     struct prt_ps_resource_S *res_cmap;
+  #endif
++     int		retval = FALSE;
++ 
++     res_prolog = (struct prt_ps_resource_S *)
++ 				      alloc(sizeof(struct prt_ps_resource_S));
++     res_encoding = (struct prt_ps_resource_S *)
++ 				      alloc(sizeof(struct prt_ps_resource_S));
++ #ifdef FEAT_MBYTE
++     res_cidfont = (struct prt_ps_resource_S *)
++ 				      alloc(sizeof(struct prt_ps_resource_S));
++     res_cmap = (struct prt_ps_resource_S *)
++ 				      alloc(sizeof(struct prt_ps_resource_S));
++ #endif
++     if (res_prolog == NULL || res_encoding == NULL
++ #ifdef FEAT_MBYTE
++ 	    || res_cidfont == NULL || res_cmap == NULL
++ #endif
++        )
++ 	goto theend;
+  
+      /*
+       * PS DSC Header comments - no PS code!
+***************
+*** 2932,2958 ****
+  #endif
+  
+      /* Search for external resources VIM supplies */
+!     if (!prt_find_resource("prolog", &res_prolog))
+      {
+  	EMSG(_("E456: Can't find PostScript resource file \"prolog.ps\""));
+  	return FALSE;
+      }
+!     if (!prt_open_resource(&res_prolog))
+  	return FALSE;
+!     if (!prt_check_resource(&res_prolog, PRT_PROLOG_VERSION))
+  	return FALSE;
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+  	/* Look for required version of multi-byte printing procset */
+! 	if (!prt_find_resource("cidfont", &res_cidfont))
+  	{
+  	    EMSG(_("E456: Can't find PostScript resource file \"cidfont.ps\""));
+  	    return FALSE;
+  	}
+! 	if (!prt_open_resource(&res_cidfont))
+  	    return FALSE;
+! 	if (!prt_check_resource(&res_cidfont, PRT_CID_PROLOG_VERSION))
+  	    return FALSE;
+      }
+  #endif
+--- 2957,2983 ----
+  #endif
+  
+      /* Search for external resources VIM supplies */
+!     if (!prt_find_resource("prolog", res_prolog))
+      {
+  	EMSG(_("E456: Can't find PostScript resource file \"prolog.ps\""));
+  	return FALSE;
+      }
+!     if (!prt_open_resource(res_prolog))
+  	return FALSE;
+!     if (!prt_check_resource(res_prolog, PRT_PROLOG_VERSION))
+  	return FALSE;
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+  	/* Look for required version of multi-byte printing procset */
+! 	if (!prt_find_resource("cidfont", res_cidfont))
+  	{
+  	    EMSG(_("E456: Can't find PostScript resource file \"cidfont.ps\""));
+  	    return FALSE;
+  	}
+! 	if (!prt_open_resource(res_cidfont))
+  	    return FALSE;
+! 	if (!prt_check_resource(res_cidfont, PRT_CID_PROLOG_VERSION))
+  	    return FALSE;
+      }
+  #endif
+***************
+*** 2968,2974 ****
+  #endif
+  	p_encoding = enc_skip(p_penc);
+  	if (*p_encoding == NUL
+! 		|| !prt_find_resource((char *)p_encoding, &res_encoding))
+  	{
+  	    /* 'printencoding' not set or not supported - find alternate */
+  #ifdef FEAT_MBYTE
+--- 2993,2999 ----
+  #endif
+  	p_encoding = enc_skip(p_penc);
+  	if (*p_encoding == NUL
+! 		|| !prt_find_resource((char *)p_encoding, res_encoding))
+  	{
+  	    /* 'printencoding' not set or not supported - find alternate */
+  #ifdef FEAT_MBYTE
+***************
+*** 2977,2989 ****
+  	    p_encoding = enc_skip(p_enc);
+  	    props = enc_canon_props(p_encoding);
+  	    if (!(props & ENC_8BIT)
+! 		    || !prt_find_resource((char *)p_encoding, &res_encoding))
+  		/* 8-bit 'encoding' is not supported */
+  #endif
+  		{
+  		/* Use latin1 as default printing encoding */
+  		p_encoding = (char_u *)"latin1";
+! 		if (!prt_find_resource((char *)p_encoding, &res_encoding))
+  		{
+  		    EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  			    p_encoding);
+--- 3002,3014 ----
+  	    p_encoding = enc_skip(p_enc);
+  	    props = enc_canon_props(p_encoding);
+  	    if (!(props & ENC_8BIT)
+! 		    || !prt_find_resource((char *)p_encoding, res_encoding))
+  		/* 8-bit 'encoding' is not supported */
+  #endif
+  		{
+  		/* Use latin1 as default printing encoding */
+  		p_encoding = (char_u *)"latin1";
+! 		if (!prt_find_resource((char *)p_encoding, res_encoding))
+  		{
+  		    EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  			    p_encoding);
+***************
+*** 2991,2997 ****
+  		}
+  	    }
+  	}
+! 	if (!prt_open_resource(&res_encoding))
+  	    return FALSE;
+  	/* For the moment there are no checks on encoding resource files to
+  	 * perform */
+--- 3016,3022 ----
+  		}
+  	    }
+  	}
+! 	if (!prt_open_resource(res_encoding))
+  	    return FALSE;
+  	/* For the moment there are no checks on encoding resource files to
+  	 * perform */
+***************
+*** 3005,3017 ****
+  	if (prt_use_courier)
+  	{
+  	    /* Include ASCII range encoding vector */
+! 	    if (!prt_find_resource(prt_ascii_encoding, &res_encoding))
+  	    {
+  		EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  							  prt_ascii_encoding);
+  		return FALSE;
+  	    }
+! 	    if (!prt_open_resource(&res_encoding))
+  		return FALSE;
+  	    /* For the moment there are no checks on encoding resource files to
+  	     * perform */
+--- 3030,3042 ----
+  	if (prt_use_courier)
+  	{
+  	    /* Include ASCII range encoding vector */
+! 	    if (!prt_find_resource(prt_ascii_encoding, res_encoding))
+  	    {
+  		EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  							  prt_ascii_encoding);
+  		return FALSE;
+  	    }
+! 	    if (!prt_open_resource(res_encoding))
+  		return FALSE;
+  	    /* For the moment there are no checks on encoding resource files to
+  	     * perform */
+***************
+*** 3034,3077 ****
+      if (prt_out_mbyte && prt_custom_cmap)
+      {
+  	/* Find user supplied CMap */
+! 	if (!prt_find_resource(prt_cmap, &res_cmap))
+  	{
+  	    EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  								    prt_cmap);
+  	    return FALSE;
+  	}
+! 	if (!prt_open_resource(&res_cmap))
+  	    return FALSE;
+      }
+  #endif
+  
+      /* List resources supplied */
+!     STRCPY(buffer, res_prolog.title);
+      STRCAT(buffer, " ");
+!     STRCAT(buffer, res_prolog.version);
+      prt_dsc_resources("DocumentSuppliedResources", "procset", buffer);
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+! 	STRCPY(buffer, res_cidfont.title);
+  	STRCAT(buffer, " ");
+! 	STRCAT(buffer, res_cidfont.version);
+  	prt_dsc_resources(NULL, "procset", buffer);
+  
+  	if (prt_custom_cmap)
+  	{
+! 	    STRCPY(buffer, res_cmap.title);
+  	    STRCAT(buffer, " ");
+! 	    STRCAT(buffer, res_cmap.version);
+  	    prt_dsc_resources(NULL, "cmap", buffer);
+  	}
+      }
+      if (!prt_out_mbyte || prt_use_courier)
+  #endif
+      {
+! 	STRCPY(buffer, res_encoding.title);
+  	STRCAT(buffer, " ");
+! 	STRCAT(buffer, res_encoding.version);
+  	prt_dsc_resources(NULL, "encoding", buffer);
+      }
+      prt_dsc_requirements(prt_duplex, prt_tumble, prt_collate,
+--- 3059,3102 ----
+      if (prt_out_mbyte && prt_custom_cmap)
+      {
+  	/* Find user supplied CMap */
+! 	if (!prt_find_resource(prt_cmap, res_cmap))
+  	{
+  	    EMSG2(_("E456: Can't find PostScript resource file \"%s.ps\""),
+  								    prt_cmap);
+  	    return FALSE;
+  	}
+! 	if (!prt_open_resource(res_cmap))
+  	    return FALSE;
+      }
+  #endif
+  
+      /* List resources supplied */
+!     STRCPY(buffer, res_prolog->title);
+      STRCAT(buffer, " ");
+!     STRCAT(buffer, res_prolog->version);
+      prt_dsc_resources("DocumentSuppliedResources", "procset", buffer);
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+! 	STRCPY(buffer, res_cidfont->title);
+  	STRCAT(buffer, " ");
+! 	STRCAT(buffer, res_cidfont->version);
+  	prt_dsc_resources(NULL, "procset", buffer);
+  
+  	if (prt_custom_cmap)
+  	{
+! 	    STRCPY(buffer, res_cmap->title);
+  	    STRCAT(buffer, " ");
+! 	    STRCAT(buffer, res_cmap->version);
+  	    prt_dsc_resources(NULL, "cmap", buffer);
+  	}
+      }
+      if (!prt_out_mbyte || prt_use_courier)
+  #endif
+      {
+! 	STRCPY(buffer, res_encoding->title);
+  	STRCAT(buffer, " ");
+! 	STRCAT(buffer, res_encoding->version);
+  	prt_dsc_resources(NULL, "encoding", buffer);
+      }
+      prt_dsc_requirements(prt_duplex, prt_tumble, prt_collate,
+***************
+*** 3114,3128 ****
+      prt_dsc_noarg("BeginProlog");
+  
+      /* Add required procsets - NOTE: order is important! */
+!     if (!prt_add_resource(&res_prolog))
+  	return FALSE;
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+  	/* Add CID font procset, and any user supplied CMap */
+! 	if (!prt_add_resource(&res_cidfont))
+  	    return FALSE;
+! 	if (prt_custom_cmap && !prt_add_resource(&res_cmap))
+  	    return FALSE;
+      }
+  #endif
+--- 3139,3153 ----
+      prt_dsc_noarg("BeginProlog");
+  
+      /* Add required procsets - NOTE: order is important! */
+!     if (!prt_add_resource(res_prolog))
+  	return FALSE;
+  #ifdef FEAT_MBYTE
+      if (prt_out_mbyte)
+      {
+  	/* Add CID font procset, and any user supplied CMap */
+! 	if (!prt_add_resource(res_cidfont))
+  	    return FALSE;
+! 	if (prt_custom_cmap && !prt_add_resource(res_cmap))
+  	    return FALSE;
+      }
+  #endif
+***************
+*** 3132,3138 ****
+  #endif
+  	/* There will be only one Roman font encoding to be included in the PS
+  	 * file. */
+! 	if (!prt_add_resource(&res_encoding))
+  	    return FALSE;
+  
+      prt_dsc_noarg("EndProlog");
+--- 3157,3163 ----
+  #endif
+  	/* There will be only one Roman font encoding to be included in the PS
+  	 * file. */
+! 	if (!prt_add_resource(res_encoding))
+  	    return FALSE;
+  
+      prt_dsc_noarg("EndProlog");
+***************
+*** 3248,3254 ****
+      prt_dsc_noarg("EndSetup");
+  
+      /* Fail if any problems writing out to the PS file */
+!     return !prt_file_error;
+  }
+  
+      void
+--- 3273,3289 ----
+      prt_dsc_noarg("EndSetup");
+  
+      /* Fail if any problems writing out to the PS file */
+!     retval = !prt_file_error;
+! 
+! theend:
+!     vim_free(res_prolog);
+!     vim_free(res_encoding);
+! #ifdef FEAT_MBYTE
+!     vim_free(res_cidfont);
+!     vim_free(res_cmap);
+! #endif
+! 
+!     return retval;
+  }
+  
+      void
+*** ../vim-7.3.160/src/quickfix.c	2010-12-02 15:33:10.000000000 +0100
+--- src/quickfix.c	2011-04-11 17:54:07.000000000 +0200
+***************
+*** 3049,3056 ****
+      int		flags = 0;
+      colnr_T	col;
+      long	tomatch;
+!     char_u	dirname_start[MAXPATHL];
+!     char_u	dirname_now[MAXPATHL];
+      char_u	*target_dir = NULL;
+  #ifdef FEAT_AUTOCMD
+      char_u	*au_name =  NULL;
+--- 3049,3056 ----
+      int		flags = 0;
+      colnr_T	col;
+      long	tomatch;
+!     char_u	*dirname_start = NULL;
+!     char_u	*dirname_now = NULL;
+      char_u	*target_dir = NULL;
+  #ifdef FEAT_AUTOCMD
+      char_u	*au_name =  NULL;
+***************
+*** 3128,3133 ****
+--- 3128,3138 ----
+  	goto theend;
+      }
+  
++     dirname_start = alloc(MAXPATHL);
++     dirname_now = alloc(MAXPATHL);
++     if (dirname_start == NULL || dirname_now == NULL)
++ 	goto theend;
++ 
+      /* Remember the current directory, because a BufRead autocommand that does
+       * ":lcd %:p:h" changes the meaning of short path names. */
+      mch_dirname(dirname_start, MAXPATHL);
+***************
+*** 3364,3369 ****
+--- 3369,3376 ----
+      }
+  
+  theend:
++     vim_free(dirname_now);
++     vim_free(dirname_start);
+      vim_free(target_dir);
+      vim_free(regmatch.regprog);
+  }
+*** ../vim-7.3.160/src/main.c	2011-03-22 18:10:34.000000000 +0100
+--- src/main.c	2011-04-11 18:06:06.000000000 +0200
+***************
+*** 3814,3820 ****
+      int		i;
+      char_u	*inicmd = NULL;
+      char_u	*p;
+!     char_u	cwd[MAXPATHL];
+  
+      if (filec > 0 && filev[0][0] == '+')
+      {
+--- 3814,3820 ----
+      int		i;
+      char_u	*inicmd = NULL;
+      char_u	*p;
+!     char_u	*cwd;
+  
+      if (filec > 0 && filev[0][0] == '+')
+      {
+***************
+*** 3827,3841 ****
+  	mainerr_arg_missing((char_u *)filev[-1]);
+  
+      /* Temporarily cd to the current directory to handle relative file names. */
+      if (mch_dirname(cwd, MAXPATHL) != OK)
+  	return NULL;
+!     if ((p = vim_strsave_escaped_ext(cwd,
+  #ifdef BACKSLASH_IN_FILENAME
+  		    "",  /* rem_backslash() will tell what chars to escape */
+  #else
+  		    PATH_ESC_CHARS,
+  #endif
+! 		    '\\', TRUE)) == NULL)
+  	return NULL;
+      ga_init2(&ga, 1, 100);
+      ga_concat(&ga, (char_u *)"<C-\\><C-N>:cd ");
+--- 3827,3849 ----
+  	mainerr_arg_missing((char_u *)filev[-1]);
+  
+      /* Temporarily cd to the current directory to handle relative file names. */
++     cwd = alloc(MAXPATHL);
++     if (cwd == NULL)
++ 	return NULL;
+      if (mch_dirname(cwd, MAXPATHL) != OK)
++     {
++ 	vim_free(cwd);
+  	return NULL;
+!     }
+!     p = vim_strsave_escaped_ext(cwd,
+  #ifdef BACKSLASH_IN_FILENAME
+  		    "",  /* rem_backslash() will tell what chars to escape */
+  #else
+  		    PATH_ESC_CHARS,
+  #endif
+! 		    '\\', TRUE);
+!     vim_free(cwd);
+!     if (p == NULL)
+  	return NULL;
+      ga_init2(&ga, 1, 100);
+      ga_concat(&ga, (char_u *)"<C-\\><C-N>:cd ");
+*** ../vim-7.3.160/src/netbeans.c	2011-04-11 16:56:29.000000000 +0200
+--- src/netbeans.c	2011-04-11 18:27:08.000000000 +0200
+***************
+*** 2891,2897 ****
+      char_u	*text;
+      linenr_T	lnum;
+      int		col;
+!     char	buf[MAXPATHL * 2 + 25];
+      char_u	*p;
+  
+      /* Don't do anything when 'ballooneval' is off, messages scrolled the
+--- 2891,2897 ----
+      char_u	*text;
+      linenr_T	lnum;
+      int		col;
+!     char	*buf;
+      char_u	*p;
+  
+      /* Don't do anything when 'ballooneval' is off, messages scrolled the
+***************
+*** 2905,2919 ****
+  	 * length. */
+  	if (text != NULL && text[0] != NUL && STRLEN(text) < MAXPATHL)
+  	{
+! 	    p = nb_quote(text);
+! 	    if (p != NULL)
+  	    {
+! 		vim_snprintf(buf, sizeof(buf),
+! 				       "0:balloonText=%d \"%s\"\n", r_cmdno, p);
+! 		vim_free(p);
+  	    }
+- 	    nbdebug(("EVT: %s", buf));
+- 	    nb_send(buf, "netbeans_beval_cb");
+  	}
+  	vim_free(text);
+      }
+--- 2905,2924 ----
+  	 * length. */
+  	if (text != NULL && text[0] != NUL && STRLEN(text) < MAXPATHL)
+  	{
+! 	    buf = (char *)alloc(MAXPATHL * 2 + 25);
+! 	    if (buf != NULL)
+  	    {
+! 		p = nb_quote(text);
+! 		if (p != NULL)
+! 		{
+! 		    vim_snprintf(buf, MAXPATHL * 2 + 25,
+! 				     "0:balloonText=%d \"%s\"\n", r_cmdno, p);
+! 		    vim_free(p);
+! 		}
+! 		nbdebug(("EVT: %s", buf));
+! 		nb_send(buf, "netbeans_beval_cb");
+! 		vim_free(buf);
+  	    }
+  	}
+  	vim_free(text);
+      }
+*** ../vim-7.3.160/src/spell.c	2011-04-11 16:56:29.000000000 +0200
+--- src/spell.c	2011-04-11 18:00:49.000000000 +0200
+***************
+*** 8590,8596 ****
+      spellinfo_T	*spin;
+      char_u	*wfname;
+  {
+!     char_u	fname[MAXPATHL];
+      int		len;
+      slang_T	*slang;
+      int		free_slang = FALSE;
+--- 8590,8596 ----
+      spellinfo_T	*spin;
+      char_u	*wfname;
+  {
+!     char_u	*fname = NULL;
+      int		len;
+      slang_T	*slang;
+      int		free_slang = FALSE;
+***************
+*** 8654,8659 ****
+--- 8654,8662 ----
+       * Write the .sug file.
+       * Make the file name by changing ".spl" to ".sug".
+       */
++     fname = alloc(MAXPATHL);
++     if (fname == NULL)
++ 	goto theend;
+      vim_strncpy(fname, wfname, MAXPATHL - 1);
+      len = (int)STRLEN(fname);
+      fname[len - 2] = 'u';
+***************
+*** 8661,8666 ****
+--- 8664,8670 ----
+      sug_write(spin, fname);
+  
+  theend:
++     vim_free(fname);
+      if (free_slang)
+  	slang_free(slang);
+      free_blocks(spin->si_blocks);
+***************
+*** 9106,9113 ****
+      int		overwrite;	    /* overwrite existing output file */
+      int		added_word;	    /* invoked through "zg" */
+  {
+!     char_u	fname[MAXPATHL];
+!     char_u	wfname[MAXPATHL];
+      char_u	**innames;
+      int		incount;
+      afffile_T	*(afile[8]);
+--- 9110,9117 ----
+      int		overwrite;	    /* overwrite existing output file */
+      int		added_word;	    /* invoked through "zg" */
+  {
+!     char_u	*fname = NULL;
+!     char_u	*wfname;
+      char_u	**innames;
+      int		incount;
+      afffile_T	*(afile[8]);
+***************
+*** 9135,9140 ****
+--- 9139,9148 ----
+      innames = &fnames[1];
+      incount = fcount - 1;
+  
++     wfname = alloc(MAXPATHL);
++     if (wfname == NULL)
++ 	return;
++ 
+      if (fcount >= 1)
+      {
+  	len = (int)STRLEN(fnames[0]);
+***************
+*** 9144,9167 ****
+  	     * "path/en.latin1.add.spl". */
+  	    innames = &fnames[0];
+  	    incount = 1;
+! 	    vim_snprintf((char *)wfname, sizeof(wfname), "%s.spl", fnames[0]);
+  	}
+  	else if (fcount == 1)
+  	{
+  	    /* For ":mkspell path/vim" output file is "path/vim.latin1.spl". */
+  	    innames = &fnames[0];
+  	    incount = 1;
+! 	    vim_snprintf((char *)wfname, sizeof(wfname), SPL_FNAME_TMPL,
+  		  fnames[0], spin.si_ascii ? (char_u *)"ascii" : spell_enc());
+  	}
+  	else if (len > 4 && STRCMP(fnames[0] + len - 4, ".spl") == 0)
+  	{
+  	    /* Name ends in ".spl", use as the file name. */
+! 	    vim_strncpy(wfname, fnames[0], sizeof(wfname) - 1);
+  	}
+  	else
+  	    /* Name should be language, make the file name from it. */
+! 	    vim_snprintf((char *)wfname, sizeof(wfname), SPL_FNAME_TMPL,
+  		  fnames[0], spin.si_ascii ? (char_u *)"ascii" : spell_enc());
+  
+  	/* Check for .ascii.spl. */
+--- 9152,9175 ----
+  	     * "path/en.latin1.add.spl". */
+  	    innames = &fnames[0];
+  	    incount = 1;
+! 	    vim_snprintf((char *)wfname, MAXPATHL, "%s.spl", fnames[0]);
+  	}
+  	else if (fcount == 1)
+  	{
+  	    /* For ":mkspell path/vim" output file is "path/vim.latin1.spl". */
+  	    innames = &fnames[0];
+  	    incount = 1;
+! 	    vim_snprintf((char *)wfname, MAXPATHL, SPL_FNAME_TMPL,
+  		  fnames[0], spin.si_ascii ? (char_u *)"ascii" : spell_enc());
+  	}
+  	else if (len > 4 && STRCMP(fnames[0] + len - 4, ".spl") == 0)
+  	{
+  	    /* Name ends in ".spl", use as the file name. */
+! 	    vim_strncpy(wfname, fnames[0], MAXPATHL - 1);
+  	}
+  	else
+  	    /* Name should be language, make the file name from it. */
+! 	    vim_snprintf((char *)wfname, MAXPATHL, SPL_FNAME_TMPL,
+  		  fnames[0], spin.si_ascii ? (char_u *)"ascii" : spell_enc());
+  
+  	/* Check for .ascii.spl. */
+***************
+*** 9186,9199 ****
+  	if (!overwrite && mch_stat((char *)wfname, &st) >= 0)
+  	{
+  	    EMSG(_(e_exists));
+! 	    return;
+  	}
+  	if (mch_isdir(wfname))
+  	{
+  	    EMSG2(_(e_isadir2), wfname);
+! 	    return;
+  	}
+  
+  	/*
+  	 * Init the aff and dic pointers.
+  	 * Get the region names if there are more than 2 arguments.
+--- 9194,9211 ----
+  	if (!overwrite && mch_stat((char *)wfname, &st) >= 0)
+  	{
+  	    EMSG(_(e_exists));
+! 	    goto theend;
+  	}
+  	if (mch_isdir(wfname))
+  	{
+  	    EMSG2(_(e_isadir2), wfname);
+! 	    goto theend;
+  	}
+  
++ 	fname = alloc(MAXPATHL);
++ 	if (fname == NULL)
++ 	    goto theend;
++ 
+  	/*
+  	 * Init the aff and dic pointers.
+  	 * Get the region names if there are more than 2 arguments.
+***************
+*** 9209,9215 ****
+  						|| innames[i][len - 3] != '_')
+  		{
+  		    EMSG2(_("E755: Invalid region in %s"), innames[i]);
+! 		    return;
+  		}
+  		spin.si_region_name[i * 2] = TOLOWER_ASC(innames[i][len - 2]);
+  		spin.si_region_name[i * 2 + 1] =
+--- 9221,9227 ----
+  						|| innames[i][len - 3] != '_')
+  		{
+  		    EMSG2(_("E755: Invalid region in %s"), innames[i]);
+! 		    goto theend;
+  		}
+  		spin.si_region_name[i * 2] = TOLOWER_ASC(innames[i][len - 2]);
+  		spin.si_region_name[i * 2 + 1] =
+***************
+*** 9226,9232 ****
+  		|| spin.si_prefroot == NULL)
+  	{
+  	    free_blocks(spin.si_blocks);
+! 	    return;
+  	}
+  
+  	/* When not producing a .add.spl file clear the character table when
+--- 9238,9244 ----
+  		|| spin.si_prefroot == NULL)
+  	{
+  	    free_blocks(spin.si_blocks);
+! 	    goto theend;
+  	}
+  
+  	/* When not producing a .add.spl file clear the character table when
+***************
+*** 9247,9253 ****
+  	    spin.si_conv.vc_type = CONV_NONE;
+  	    spin.si_region = 1 << i;
+  
+! 	    vim_snprintf((char *)fname, sizeof(fname), "%s.aff", innames[i]);
+  	    if (mch_stat((char *)fname, &st) >= 0)
+  	    {
+  		/* Read the .aff file.  Will init "spin->si_conv" based on the
+--- 9259,9265 ----
+  	    spin.si_conv.vc_type = CONV_NONE;
+  	    spin.si_region = 1 << i;
+  
+! 	    vim_snprintf((char *)fname, MAXPATHL, "%s.aff", innames[i]);
+  	    if (mch_stat((char *)fname, &st) >= 0)
+  	    {
+  		/* Read the .aff file.  Will init "spin->si_conv" based on the
+***************
+*** 9258,9264 ****
+  		else
+  		{
+  		    /* Read the .dic file and store the words in the trees. */
+! 		    vim_snprintf((char *)fname, sizeof(fname), "%s.dic",
+  								  innames[i]);
+  		    if (spell_read_dic(&spin, fname, afile[i]) == FAIL)
+  			error = TRUE;
+--- 9270,9276 ----
+  		else
+  		{
+  		    /* Read the .dic file and store the words in the trees. */
+! 		    vim_snprintf((char *)fname, MAXPATHL, "%s.dic",
+  								  innames[i]);
+  		    if (spell_read_dic(&spin, fname, afile[i]) == FAIL)
+  			error = TRUE;
+***************
+*** 9340,9345 ****
+--- 9352,9361 ----
+  	    spell_make_sugfile(&spin, wfname);
+  
+      }
++ 
++ theend:
++     vim_free(fname);
++     vim_free(wfname);
+  }
+  
+  /*
+***************
+*** 9392,9398 ****
+      buf_T	*buf = NULL;
+      int		new_spf = FALSE;
+      char_u	*fname;
+!     char_u	fnamebuf[MAXPATHL];
+      char_u	line[MAXWLEN * 2];
+      long	fpos, fpos_next = 0;
+      int		i;
+--- 9408,9414 ----
+      buf_T	*buf = NULL;
+      int		new_spf = FALSE;
+      char_u	*fname;
+!     char_u	*fnamebuf = NULL;
+      char_u	line[MAXWLEN * 2];
+      long	fpos, fpos_next = 0;
+      int		i;
+***************
+*** 9422,9427 ****
+--- 9438,9446 ----
+  	    EMSG2(_(e_notset), "spellfile");
+  	    return;
+  	}
++ 	fnamebuf = alloc(MAXPATHL);
++ 	if (fnamebuf == NULL)
++ 	    return;
+  
+  	for (spf = curwin->w_s->b_p_spf, i = 1; *spf != NUL; ++i)
+  	{
+***************
+*** 9431,9436 ****
+--- 9450,9456 ----
+  	    if (*spf == NUL)
+  	    {
+  		EMSGN(_("E765: 'spellfile' does not have %ld entries"), idx);
++ 		vim_free(fnamebuf);
+  		return;
+  	    }
+  	}
+***************
+*** 9442,9447 ****
+--- 9462,9468 ----
+  	if (buf != NULL && bufIsChanged(buf))
+  	{
+  	    EMSG(_(e_bufloaded));
++ 	    vim_free(fnamebuf);
+  	    return;
+  	}
+  
+***************
+*** 9536,9541 ****
+--- 9557,9563 ----
+  
+  	redraw_all_later(SOME_VALID);
+      }
++     vim_free(fnamebuf);
+  }
+  
+  /*
+***************
+*** 9544,9550 ****
+      static void
+  init_spellfile()
+  {
+!     char_u	buf[MAXPATHL];
+      int		l;
+      char_u	*fname;
+      char_u	*rtp;
+--- 9566,9572 ----
+      static void
+  init_spellfile()
+  {
+!     char_u	*buf;
+      int		l;
+      char_u	*fname;
+      char_u	*rtp;
+***************
+*** 9554,9559 ****
+--- 9576,9585 ----
+  
+      if (*curwin->w_s->b_p_spl != NUL && curwin->w_s->b_langp.ga_len > 0)
+      {
++ 	buf = alloc(MAXPATHL);
++ 	if (buf == NULL)
++ 	    return;
++ 
+  	/* Find the end of the language name.  Exclude the region.  If there
+  	 * is a path separator remember the start of the tail. */
+  	for (lend = curwin->w_s->b_p_spl; *lend != NUL
+***************
+*** 9597,9603 ****
+  				 "/%.*s", (int)(lend - lstart), lstart);
+  		}
+  		l = (int)STRLEN(buf);
+! 		fname = LANGP_ENTRY(curwin->w_s->b_langp, 0)->lp_slang->sl_fname;
+  		vim_snprintf((char *)buf + l, MAXPATHL - l, ".%s.add",
+  			fname != NULL
+  			  && strstr((char *)gettail(fname), ".ascii.") != NULL
+--- 9623,9630 ----
+  				 "/%.*s", (int)(lend - lstart), lstart);
+  		}
+  		l = (int)STRLEN(buf);
+! 		fname = LANGP_ENTRY(curwin->w_s->b_langp, 0)
+! 							 ->lp_slang->sl_fname;
+  		vim_snprintf((char *)buf + l, MAXPATHL - l, ".%s.add",
+  			fname != NULL
+  			  && strstr((char *)gettail(fname), ".ascii.") != NULL
+***************
+*** 9607,9612 ****
+--- 9634,9641 ----
+  	    }
+  	    aspath = FALSE;
+  	}
++ 
++ 	vim_free(buf);
+      }
+  }
+  
+*** ../vim-7.3.160/src/tag.c	2011-04-11 16:56:29.000000000 +0200
+--- src/tag.c	2011-04-11 20:54:36.000000000 +0200
+***************
+*** 775,791 ****
+  	    {
+  		list_T	*list;
+  		char_u	tag_name[128 + 1];
+! 		char_u	fname[MAXPATHL + 1];
+! 		char_u	cmd[CMDBUFFSIZE + 1];
+  
+  		/*
+  		 * Add the matching tags to the location list for the current
+  		 * window.
+  		 */
+  
+  		list = list_alloc();
+! 		if (list == NULL)
+  		    goto end_do_tag;
+  
+  		for (i = 0; i < num_matches; ++i)
+  		{
+--- 775,799 ----
+  	    {
+  		list_T	*list;
+  		char_u	tag_name[128 + 1];
+! 		char_u	*fname;
+! 		char_u	*cmd;
+  
+  		/*
+  		 * Add the matching tags to the location list for the current
+  		 * window.
+  		 */
+  
++ 		fname = alloc(MAXPATHL + 1);
++ 		cmd = alloc(CMDBUFFSIZE + 1);
+  		list = list_alloc();
+! 		if (list == NULL || fname == NULL || cmd == NULL)
+! 		{
+! 		    vim_free(cmd);
+! 		    vim_free(fname);
+! 		    if (list != NULL)
+! 			list_free(list, TRUE);
+  		    goto end_do_tag;
++ 		}
+  
+  		for (i = 0; i < num_matches; ++i)
+  		{
+***************
+*** 911,916 ****
+--- 919,926 ----
+  		set_errorlist(curwin, list, ' ', IObuff);
+  
+  		list_free(list, TRUE);
++ 		vim_free(fname);
++ 		vim_free(cmd);
+  
+  		cur_match = 0;		/* Jump to the first tag */
+  	    }
+***************
+*** 3777,3784 ****
+      char_u  *start;		/* start of the value */
+      char_u  *end;		/* after the value; can be NULL */
+  {
+!     char_u	buf[MAXPATHL];
+      int		len = 0;
+  
+      /* check that the field name doesn't exist yet */
+      if (dict_find(dict, (char_u *)field_name, -1) != NULL)
+--- 3787,3795 ----
+      char_u  *start;		/* start of the value */
+      char_u  *end;		/* after the value; can be NULL */
+  {
+!     char_u	*buf;
+      int		len = 0;
++     int		retval;
+  
+      /* check that the field name doesn't exist yet */
+      if (dict_find(dict, (char_u *)field_name, -1) != NULL)
+***************
+*** 3791,3796 ****
+--- 3802,3810 ----
+  	}
+  	return FAIL;
+      }
++     buf = alloc(MAXPATHL);
++     if (buf == NULL)
++ 	return FAIL;
+      if (start != NULL)
+      {
+  	if (end == NULL)
+***************
+*** 3800,3811 ****
+  		--end;
+  	}
+  	len = (int)(end - start);
+! 	if (len > (int)sizeof(buf) - 1)
+! 	    len = sizeof(buf) - 1;
+  	vim_strncpy(buf, start, len);
+      }
+      buf[len] = NUL;
+!     return dict_add_nr_str(dict, field_name, 0L, buf);
+  }
+  
+  /*
+--- 3814,3827 ----
+  		--end;
+  	}
+  	len = (int)(end - start);
+! 	if (len > MAXPATHL - 1)
+! 	    len = MAXPATHL - 1;
+  	vim_strncpy(buf, start, len);
+      }
+      buf[len] = NUL;
+!     retval = dict_add_nr_str(dict, field_name, 0L, buf);
+!     vim_free(buf);
+!     return retval;
+  }
+  
+  /*
+*** ../vim-7.3.160/src/vim.h	2010-12-30 12:30:26.000000000 +0100
+--- src/vim.h	2011-04-11 20:50:54.000000000 +0200
+***************
+*** 1435,1440 ****
+--- 1435,1442 ----
+  
+  #define IOSIZE	   (1024+1)	/* file i/o and sprintf buffer size */
+  
++ #define DIALOG_MSG_SIZE 1000	/* buffer size for dialog_msg() */
++ 
+  #ifdef FEAT_MBYTE
+  # define MSG_BUF_LEN 480	/* length of buffer for small messages */
+  # define MSG_BUF_CLEN  (MSG_BUF_LEN / 6)    /* cell length (worst case: utf-8
+*** ../vim-7.3.160/src/xxd/xxd.c	2011-04-02 14:44:50.000000000 +0200
+--- src/xxd/xxd.c	2011-04-11 16:40:48.000000000 +0200
+***************
+*** 476,482 ****
+    int octspergrp = -1;	/* number of octets grouped in output */
+    int grplen;		/* total chars per octet group */
+    long length = -1, n = 0, seekoff = 0;
+!   char l[LLEN+1];
+    char *pp;
+  
+  #ifdef AMIGA
+--- 476,482 ----
+    int octspergrp = -1;	/* number of octets grouped in output */
+    int grplen;		/* total chars per octet group */
+    long length = -1, n = 0, seekoff = 0;
+!   static char l[LLEN+1];  /* static because it may be too big for stack */
+    char *pp;
+  
+  #ifdef AMIGA
+*** ../vim-7.3.160/src/version.c	2011-04-11 16:56:29.000000000 +0200
+--- src/version.c	2011-04-11 21:15:33.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     161,
+  /**/
+
+-- 
+The process for understanding customers primarily involves sitting around with
+other marketing people and talking about what you would to if you were dumb
+enough to be a customer.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.162 b/source/ap/vim/patches/7.3.162
new file mode 100644
index 00000000..3f0173af
--- /dev/null
+++ b/source/ap/vim/patches/7.3.162
@@ -0,0 +1,83 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.162
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.162
+Problem:    No error message when assigning to a list with an index out of
+	    range. (Yukihiro Nakadaira)
+Solution:   Add the error message.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.161/src/eval.c	2011-04-11 21:35:03.000000000 +0200
+--- src/eval.c	2011-04-21 13:40:38.000000000 +0200
+***************
+*** 2794,2799 ****
+--- 2794,2801 ----
+  	    {
+  		if (lp->ll_range && !lp->ll_empty2)
+  		    clear_tv(&var2);
++ 		if (!quiet)
++ 		    EMSGN(_(e_listidx), lp->ll_n1);
+  		return NULL;
+  	    }
+  
+***************
+*** 2811,2817 ****
+--- 2813,2823 ----
+  		{
+  		    ni = list_find(lp->ll_list, lp->ll_n2);
+  		    if (ni == NULL)
++ 		    {
++ 			if (!quiet)
++ 			    EMSGN(_(e_listidx), lp->ll_n2);
+  			return NULL;
++ 		    }
+  		    lp->ll_n2 = list_idx_of_item(lp->ll_list, ni);
+  		}
+  
+***************
+*** 2819,2825 ****
+--- 2825,2835 ----
+  		if (lp->ll_n1 < 0)
+  		    lp->ll_n1 = list_idx_of_item(lp->ll_list, lp->ll_li);
+  		if (lp->ll_n2 < lp->ll_n1)
++ 		{
++ 		    if (!quiet)
++ 			EMSGN(_(e_listidx), lp->ll_n2);
+  		    return NULL;
++ 		}
+  	    }
+  
+  	    lp->ll_tv = &lp->ll_li->li_tv;
+*** ../vim-7.3.161/src/version.c	2011-04-11 21:35:03.000000000 +0200
+--- src/version.c	2011-04-21 13:44:46.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     162,
+  /**/
+
+-- 
+Far back in the mists of ancient time, in the great and glorious days of the
+former Galactic Empire, life was wild, rich and largely tax free.
+Mighty starships plied their way between exotic suns, seeking adventure and
+reward among the furthest reaches of Galactic space.  In those days, spirits
+were brave, the stakes were high, men were real men, women were real women
+and small furry creatures from Alpha Centauri were real small furry creatures
+from Alpha Centauri.  And all dared to brave unknown terrors, to do mighty
+deeds, to boldly split infinitives that no man had split before -- and thus
+was the Empire forged.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.163 b/source/ap/vim/patches/7.3.163
new file mode 100644
index 00000000..b5f1cb4a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.163
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.163
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.163
+Problem:    For the default of 'shellpipe' "mksh" and "pdksh" are not
+	    recognized.
+Solution:   Recognize these shell names.
+Files:	    src/option.c
+
+
+*** ../vim-7.3.162/src/option.c	2011-03-22 14:35:01.000000000 +0100
+--- src/option.c	2011-04-15 20:49:54.000000000 +0200
+***************
+*** 3846,3851 ****
+--- 3846,3853 ----
+  # ifndef OS2	/* Always use bourne shell style redirection if we reach this */
+  	    if (       fnamecmp(p, "sh") == 0
+  		    || fnamecmp(p, "ksh") == 0
++ 		    || fnamecmp(p, "mksh") == 0
++ 		    || fnamecmp(p, "pdksh") == 0
+  		    || fnamecmp(p, "zsh") == 0
+  		    || fnamecmp(p, "zsh-beta") == 0
+  		    || fnamecmp(p, "bash") == 0
+***************
+*** 3853,3858 ****
+--- 3855,3862 ----
+  		    || fnamecmp(p, "cmd") == 0
+  		    || fnamecmp(p, "sh.exe") == 0
+  		    || fnamecmp(p, "ksh.exe") == 0
++ 		    || fnamecmp(p, "mksh.exe") == 0
++ 		    || fnamecmp(p, "pdksh.exe") == 0
+  		    || fnamecmp(p, "zsh.exe") == 0
+  		    || fnamecmp(p, "zsh-beta.exe") == 0
+  		    || fnamecmp(p, "bash.exe") == 0
+*** ../vim-7.3.162/src/version.c	2011-04-21 14:27:21.000000000 +0200
+--- src/version.c	2011-04-28 12:56:03.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     163,
+  /**/
+
+-- 
+If you put 7 of the most talented OSS developers in a room for a week
+and asked them to fix a bug in a spreadsheet program, in 1 week
+you'd have 2 new mail readers and a text-based web browser.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.164 b/source/ap/vim/patches/7.3.164
new file mode 100644
index 00000000..9049f1b5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.164
@@ -0,0 +1,181 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.164
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.164
+Problem:    C-indenting: a preprocessor statement confuses detection of a
+	    function delcaration.
+Solution:   Ignore preprocessor lines. (Lech Lorens)  Also recognize the style
+	    to put a comma before the argument name.
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.163/src/misc1.c	2011-04-11 16:56:29.000000000 +0200
+--- src/misc1.c	2011-04-28 12:49:55.000000000 +0200
+***************
+*** 5396,5403 ****
+  cin_ispreproc(s)
+      char_u *s;
+  {
+!     s = skipwhite(s);
+!     if (*s == '#')
+  	return TRUE;
+      return FALSE;
+  }
+--- 5396,5402 ----
+  cin_ispreproc(s)
+      char_u *s;
+  {
+!     if (*skipwhite(s) == '#')
+  	return TRUE;
+      return FALSE;
+  }
+***************
+*** 5513,5518 ****
+--- 5512,5521 ----
+      else
+  	s = *sp;
+  
++     /* Ignore line starting with #. */
++     if (cin_ispreproc(s))
++ 	return FALSE;
++ 
+      while (*s && *s != '(' && *s != ';' && *s != '\'' && *s != '"')
+      {
+  	if (cin_iscomment(s))	/* ignore comments */
+***************
+*** 5538,5550 ****
+  		retval = TRUE;
+  	    goto done;
+  	}
+! 	if (*s == ',' && cin_nocode(s + 1))
+  	{
+! 	    /* ',' at the end: continue looking in the next line */
+  	    if (lnum >= curbuf->b_ml.ml_line_count)
+  		break;
+! 
+! 	    s = ml_get(++lnum);
+  	}
+  	else if (cin_iscomment(s))	/* ignore comments */
+  	    s = cin_skipcomment(s);
+--- 5541,5569 ----
+  		retval = TRUE;
+  	    goto done;
+  	}
+! 	if ((*s == ',' && cin_nocode(s + 1)) || s[1] == NUL || cin_nocode(s))
+  	{
+! 	    int comma = (*s == ',');
+! 
+! 	    /* ',' at the end: continue looking in the next line.
+! 	     * At the end: check for ',' in the next line, for this style:
+! 	     * func(arg1
+! 	     *       , arg2) */
+! 	    for (;;)
+! 	    {
+! 		if (lnum >= curbuf->b_ml.ml_line_count)
+! 		    break;
+! 		s = ml_get(++lnum);
+! 		if (!cin_ispreproc(s))
+! 		    break;
+! 	    }
+  	    if (lnum >= curbuf->b_ml.ml_line_count)
+  		break;
+! 	    /* Require a comma at end of the line or a comma or ')' at the
+! 	     * start of next line. */
+! 	    s = skipwhite(s);
+! 	    if (!comma && *s != ',' && *s != ')')
+! 		break;
+  	}
+  	else if (cin_iscomment(s))	/* ignore comments */
+  	    s = cin_skipcomment(s);
+*** ../vim-7.3.163/src/testdir/test3.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test3.in	2011-04-28 12:15:12.000000000 +0200
+***************
+*** 1315,1320 ****
+--- 1315,1349 ----
+  }
+  
+  STARTTEST
++ :set cino=(0,ts
++ 2kdd=][
++ ENDTEST
++ 
++ void func(int a
++ #if defined(FOO)
++ 		  , int b
++ 		  , int c
++ #endif
++ 		 )
++ {
++ }
++ 
++ STARTTEST
++ :set cino=(0
++ 2kdd=][
++ ENDTEST
++ 
++ void
++ func(int a
++ #if defined(FOO)
++ 		  , int b
++ 		  , int c
++ #endif
++ 		 )
++ {
++ }
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.163/src/testdir/test3.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test3.ok	2011-04-28 12:54:04.000000000 +0200
+***************
+*** 1183,1185 ****
+--- 1183,1206 ----
+  		foo;
+  }
+  
++ 
++ void func(int a
++ #if defined(FOO)
++ 		  , int b
++ 		  , int c
++ #endif
++ 		 )
++ {
++ }
++ 
++ 
++ 	void
++ func(int a
++ #if defined(FOO)
++ 	 , int b
++ 	 , int c
++ #endif
++ 	)
++ {
++ }
++ 
+*** ../vim-7.3.163/src/version.c	2011-04-28 12:56:57.000000000 +0200
+--- src/version.c	2011-04-28 12:59:55.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     164,
+  /**/
+
+-- 
+Due knot trussed yore spell chequer two fined awl miss steaks.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.165 b/source/ap/vim/patches/7.3.165
new file mode 100644
index 00000000..2725259e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.165
@@ -0,0 +1,47 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.165
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.165
+Problem:    ":find" completion does not escape spaces in a directory name.
+	    (Isz)
+Solution:   Add backslashes for EXPAND_FILES_IN_PATH. (Carlo Teubner)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.164/src/ex_getln.c	2010-12-02 16:01:23.000000000 +0100
+--- src/ex_getln.c	2011-04-28 12:52:12.000000000 +0200
+***************
+*** 3702,3707 ****
+--- 3702,3708 ----
+      if (options & WILD_ESCAPE)
+      {
+  	if (xp->xp_context == EXPAND_FILES
++ 		|| xp->xp_context == EXPAND_FILES_IN_PATH
+  		|| xp->xp_context == EXPAND_SHELLCMD
+  		|| xp->xp_context == EXPAND_BUFFERS
+  		|| xp->xp_context == EXPAND_DIRECTORIES)
+*** ../vim-7.3.164/src/version.c	2011-04-28 13:01:59.000000000 +0200
+--- src/version.c	2011-04-28 17:17:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     165,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+38. You wake up at 3 a.m. to go to the bathroom and stop and check your e-mail
+    on the way back to bed.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.166 b/source/ap/vim/patches/7.3.166
new file mode 100644
index 00000000..93c6ed35
--- /dev/null
+++ b/source/ap/vim/patches/7.3.166
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.166
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.166
+Problem:    Buffer on the stack may be too big
+Solution:   Allocate the space.
+Files:	    src/option.c
+
+
+*** ../vim-7.3.165/src/option.c	2011-04-28 12:56:57.000000000 +0200
+--- src/option.c	2011-04-15 20:49:54.000000000 +0200
+***************
+*** 9185,9191 ****
+      int		expand;
+  {
+      char_u	*s;
+!     char_u	buf[MAXPATHL];
+  
+      if (fprintf(fd, "%s %s=", cmd, name) < 0)
+  	return FAIL;
+--- 9185,9191 ----
+      int		expand;
+  {
+      char_u	*s;
+!     char_u	*buf;
+  
+      if (fprintf(fd, "%s %s=", cmd, name) < 0)
+  	return FAIL;
+***************
+*** 9203,9211 ****
+--- 9203,9218 ----
+  	}
+  	else if (expand)
+  	{
++ 	    buf = alloc(MAXPATHL);
++ 	    if (buf == NULL)
++ 		return FAIL;
+  	    home_replace(NULL, *valuep, buf, MAXPATHL, FALSE);
+  	    if (put_escstr(fd, buf, 2) == FAIL)
++ 	    {
++ 		vim_free(buf);
+  		return FAIL;
++ 	    }
++ 	    vim_free(buf);
+  	}
+  	else if (put_escstr(fd, *valuep, 2) == FAIL)
+  	    return FAIL;
+*** ../vim-7.3.165/src/version.c	2011-04-28 17:21:49.000000000 +0200
+--- src/version.c	2011-04-28 17:23:24.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     166,
+  /**/
+
+-- 
+He who laughs last, thinks slowest.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.167 b/source/ap/vim/patches/7.3.167
new file mode 100644
index 00000000..4a6de89f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.167
@@ -0,0 +1,96 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.167
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.167
+Problem:    When using the internal grep QuickFixCmdPost is not triggered.
+	    (Yukihiro Nakadaira)
+Solution:   Change the place where autocommands are triggered.
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.166/src/quickfix.c	2011-04-11 21:35:03.000000000 +0200
+--- src/quickfix.c	2011-04-28 13:28:03.000000000 +0200
+***************
+*** 2742,2747 ****
+--- 2742,2754 ----
+  #ifdef FEAT_AUTOCMD
+      char_u	*au_name = NULL;
+  
++     /* Redirect ":grep" to ":vimgrep" if 'grepprg' is "internal". */
++     if (grep_internal(eap->cmdidx))
++     {
++ 	ex_vimgrep(eap);
++ 	return;
++     }
++ 
+      switch (eap->cmdidx)
+      {
+  	case CMD_make:	    au_name = (char_u *)"make"; break;
+***************
+*** 2763,2775 ****
+      }
+  #endif
+  
+-     /* Redirect ":grep" to ":vimgrep" if 'grepprg' is "internal". */
+-     if (grep_internal(eap->cmdidx))
+-     {
+- 	ex_vimgrep(eap);
+- 	return;
+-     }
+- 
+      if (eap->cmdidx == CMD_lmake || eap->cmdidx == CMD_lgrep
+  	|| eap->cmdidx == CMD_lgrepadd)
+  	wp = curwin;
+--- 2770,2775 ----
+***************
+*** 3057,3066 ****
+  
+      switch (eap->cmdidx)
+      {
+! 	case CMD_vimgrep: au_name = (char_u *)"vimgrep"; break;
+! 	case CMD_lvimgrep: au_name = (char_u *)"lvimgrep"; break;
+! 	case CMD_vimgrepadd: au_name = (char_u *)"vimgrepadd"; break;
+  	case CMD_lvimgrepadd: au_name = (char_u *)"lvimgrepadd"; break;
+  	default: break;
+      }
+      if (au_name != NULL)
+--- 3057,3070 ----
+  
+      switch (eap->cmdidx)
+      {
+! 	case CMD_vimgrep:     au_name = (char_u *)"vimgrep"; break;
+! 	case CMD_lvimgrep:    au_name = (char_u *)"lvimgrep"; break;
+! 	case CMD_vimgrepadd:  au_name = (char_u *)"vimgrepadd"; break;
+  	case CMD_lvimgrepadd: au_name = (char_u *)"lvimgrepadd"; break;
++ 	case CMD_grep:	      au_name = (char_u *)"grep"; break;
++ 	case CMD_lgrep:	      au_name = (char_u *)"lgrep"; break;
++ 	case CMD_grepadd:     au_name = (char_u *)"grepadd"; break;
++ 	case CMD_lgrepadd:    au_name = (char_u *)"lgrepadd"; break;
+  	default: break;
+      }
+      if (au_name != NULL)
+*** ../vim-7.3.166/src/version.c	2011-04-28 17:24:54.000000000 +0200
+--- src/version.c	2011-04-28 17:26:17.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     167,
+  /**/
+
+-- 
+Micro$oft: where do you want to go today?
+    Linux: where do you want to go tomorrow?
+  FreeBSD: are you guys coming, or what?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.168 b/source/ap/vim/patches/7.3.168
new file mode 100644
index 00000000..3d6fe947
--- /dev/null
+++ b/source/ap/vim/patches/7.3.168
@@ -0,0 +1,82 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.168
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.168
+Problem:    When the second argument of input() contains a CR the text up to
+	    that is used without asking the user. (Yasuhiro Matsumoto)
+Solution:   Change CR, NL and ESC in the text to a space.
+Files:	    src/getchar.c
+
+
+*** ../vim-7.3.167/src/getchar.c	2011-03-22 13:07:19.000000000 +0100
+--- src/getchar.c	2011-04-28 14:50:26.000000000 +0200
+***************
+*** 635,645 ****
+--- 635,648 ----
+  /*
+   * Stuff "s" into the stuff buffer, leaving special key codes unmodified and
+   * escaping other K_SPECIAL and CSI bytes.
++  * Change CR, LF and ESC into a space.
+   */
+      void
+  stuffReadbuffSpec(s)
+      char_u	*s;
+  {
++     int c;
++ 
+      while (*s != NUL)
+      {
+  	if (*s == K_SPECIAL && s[1] != NUL && s[2] != NUL)
+***************
+*** 649,659 ****
+  	    s += 3;
+  	}
+  	else
+  #ifdef FEAT_MBYTE
+! 	    stuffcharReadbuff(mb_ptr2char_adv(&s));
+  #else
+! 	    stuffcharReadbuff(*s++);
+  #endif
+      }
+  }
+  #endif
+--- 652,667 ----
+  	    s += 3;
+  	}
+  	else
++ 	{
+  #ifdef FEAT_MBYTE
+! 	    c = mb_ptr2char_adv(&s);
+  #else
+! 	    c = *s++;
+  #endif
++ 	    if (c == CAR || c == NL || c == ESC)
++ 		c = ' ';
++ 	    stuffcharReadbuff(c);
++ 	}
+      }
+  }
+  #endif
+*** ../vim-7.3.167/src/version.c	2011-04-28 17:27:05.000000000 +0200
+--- src/version.c	2011-04-28 17:28:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     168,
+  /**/
+
+-- 
+Everyone has a photographic memory. Some don't have film.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.169 b/source/ap/vim/patches/7.3.169
new file mode 100644
index 00000000..056ca99f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.169
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.169
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.169
+Problem:    Freeing memory already freed, warning from static code analyzer.
+Solution:   Initialize pointers to NULL, correct use of "mustfree". (partly by
+	    Dominique Pelle)
+Files:	    src/mis1.c
+
+
+*** ../vim-7.3.168/src/misc1.c	2011-04-28 13:01:59.000000000 +0200
+--- src/misc1.c	2011-04-28 17:42:00.000000000 +0200
+***************
+*** 3505,3511 ****
+      if (enc_utf8 && var != NULL)
+      {
+  	int	len;
+! 	char_u  *pp;
+  
+  	/* Convert from active codepage to UTF-8.  Other conversions are
+  	 * not done, because they would fail for non-ASCII characters. */
+--- 3505,3511 ----
+      if (enc_utf8 && var != NULL)
+      {
+  	int	len;
+! 	char_u  *pp = NULL;
+  
+  	/* Convert from active codepage to UTF-8.  Other conversions are
+  	 * not done, because they would fail for non-ASCII characters. */
+***************
+*** 3872,3882 ****
+   * Vim's version of getenv().
+   * Special handling of $HOME, $VIM and $VIMRUNTIME.
+   * Also does ACP to 'enc' conversion for Win32.
+   */
+      char_u *
+  vim_getenv(name, mustfree)
+      char_u	*name;
+!     int		*mustfree;	/* set to TRUE when returned is allocated */
+  {
+      char_u	*p;
+      char_u	*pend;
+--- 3872,3884 ----
+   * Vim's version of getenv().
+   * Special handling of $HOME, $VIM and $VIMRUNTIME.
+   * Also does ACP to 'enc' conversion for Win32.
++  * "mustfree" is set to TRUE when returned is allocated, it must be
++  * initialized to FALSE by the caller.
+   */
+      char_u *
+  vim_getenv(name, mustfree)
+      char_u	*name;
+!     int		*mustfree;
+  {
+      char_u	*p;
+      char_u	*pend;
+***************
+*** 3898,3904 ****
+  	if (enc_utf8)
+  	{
+  	    int	    len;
+! 	    char_u  *pp;
+  
+  	    /* Convert from active codepage to UTF-8.  Other conversions are
+  	     * not done, because they would fail for non-ASCII characters. */
+--- 3900,3906 ----
+  	if (enc_utf8)
+  	{
+  	    int	    len;
+! 	    char_u  *pp = NULL;
+  
+  	    /* Convert from active codepage to UTF-8.  Other conversions are
+  	     * not done, because they would fail for non-ASCII characters. */
+***************
+*** 3942,3948 ****
+  	    if (enc_utf8)
+  	    {
+  		int	len;
+! 		char_u  *pp;
+  
+  		/* Convert from active codepage to UTF-8.  Other conversions
+  		 * are not done, because they would fail for non-ASCII
+--- 3944,3950 ----
+  	    if (enc_utf8)
+  	    {
+  		int	len;
+! 		char_u  *pp = NULL;
+  
+  		/* Convert from active codepage to UTF-8.  Other conversions
+  		 * are not done, because they would fail for non-ASCII
+***************
+*** 3950,3956 ****
+  		acp_to_enc(p, (int)STRLEN(p), &pp, &len);
+  		if (pp != NULL)
+  		{
+! 		    if (mustfree)
+  			vim_free(p);
+  		    p = pp;
+  		    *mustfree = TRUE;
+--- 3952,3958 ----
+  		acp_to_enc(p, (int)STRLEN(p), &pp, &len);
+  		if (pp != NULL)
+  		{
+! 		    if (*mustfree)
+  			vim_free(p);
+  		    p = pp;
+  		    *mustfree = TRUE;
+*** ../vim-7.3.168/src/version.c	2011-04-28 17:30:05.000000000 +0200
+--- src/version.c	2011-04-28 17:48:04.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     169,
+  /**/
+
+-- 
+A day without sunshine is like, well, night.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.170 b/source/ap/vim/patches/7.3.170
new file mode 100644
index 00000000..933173ea
--- /dev/null
+++ b/source/ap/vim/patches/7.3.170
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.170
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.170
+Problem:    VMS Makefile for testing was not updated for test77.
+Solution:   Add test77 to the Makefile.
+Files:	    src/testdir/Make_vms.mms
+
+
+*** ../vim-7.3.169/src/testdir/Make_vms.mms	2010-11-10 16:54:16.000000000 +0100
+--- src/testdir/Make_vms.mms	2011-03-03 17:04:56.000000000 +0100
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2010 Nov 10
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Mar 03
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 74,80 ****
+  	 test56.out test57.out test60.out \
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+! 	 test71.out test72.out test74.out test75.out test76.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 74,81 ----
+  	 test56.out test57.out test60.out \
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+! 	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.169/src/version.c	2011-04-28 17:48:39.000000000 +0200
+--- src/version.c	2011-04-28 19:04:33.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     170,
+  /**/
+
+-- 
+The users that I support would double-click on a landmine to find out
+what happens.				-- A system administrator
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.171 b/source/ap/vim/patches/7.3.171
new file mode 100644
index 00000000..f965e0a2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.171
@@ -0,0 +1,142 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.171
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.171
+Problem:    When the clipboard isn't supported: ":yank*" gives a confusing
+	    error message.
+Solution:   Specifically mention that the register name is invalid.
+	    (Jean-Rene David)
+Files:	    runtime/doc/change.txt, src/ex_docmd.c, src/globals.h
+
+
+*** ../vim-7.3.170/runtime/doc/change.txt	2010-08-15 21:57:18.000000000 +0200
+--- runtime/doc/change.txt	2011-05-05 13:48:00.000000000 +0200
+***************
+*** 916,923 ****
+  {Visual}["x]Y		Yank the highlighted lines [into register x] (for
+  			{Visual} see |Visual-mode|).  {not in Vi}
+  
+! 							*:y* *:yank*
+! :[range]y[ank] [x]	Yank [range] lines [into register x].
+  
+  :[range]y[ank] [x] {count}
+  			Yank {count} lines, starting with last line number
+--- 917,926 ----
+  {Visual}["x]Y		Yank the highlighted lines [into register x] (for
+  			{Visual} see |Visual-mode|).  {not in Vi}
+  
+! 							*:y* *:yank* *E850*
+! :[range]y[ank] [x]	Yank [range] lines [into register x]. Yanking to the
+! 			"* or "+ registers is possible only in GUI versions or
+! 			when the |+xterm_clipboard| feature is included.
+  
+  :[range]y[ank] [x] {count}
+  			Yank {count} lines, starting with last line number
+*** ../vim-7.3.170/src/ex_docmd.c	2011-04-11 21:35:03.000000000 +0200
+--- src/ex_docmd.c	2011-05-05 13:48:57.000000000 +0200
+***************
+*** 2424,2448 ****
+      if (       (ea.argt & REGSTR)
+  	    && *ea.arg != NUL
+  #ifdef FEAT_USR_CMDS
+- 	    && valid_yank_reg(*ea.arg, (ea.cmdidx != CMD_put
+- 						   && USER_CMDIDX(ea.cmdidx)))
+  	    /* Do not allow register = for user commands */
+  	    && (!USER_CMDIDX(ea.cmdidx) || *ea.arg != '=')
+- #else
+- 	    && valid_yank_reg(*ea.arg, ea.cmdidx != CMD_put)
+  #endif
+  	    && !((ea.argt & COUNT) && VIM_ISDIGIT(*ea.arg)))
+      {
+! 	ea.regname = *ea.arg++;
+! #ifdef FEAT_EVAL
+! 	/* for '=' register: accept the rest of the line as an expression */
+! 	if (ea.arg[-1] == '=' && ea.arg[0] != NUL)
+  	{
+! 	    set_expr_line(vim_strsave(ea.arg));
+! 	    ea.arg += STRLEN(ea.arg);
+  	}
+  #endif
+! 	ea.arg = skipwhite(ea.arg);
+      }
+  
+      /*
+--- 2424,2462 ----
+      if (       (ea.argt & REGSTR)
+  	    && *ea.arg != NUL
+  #ifdef FEAT_USR_CMDS
+  	    /* Do not allow register = for user commands */
+  	    && (!USER_CMDIDX(ea.cmdidx) || *ea.arg != '=')
+  #endif
+  	    && !((ea.argt & COUNT) && VIM_ISDIGIT(*ea.arg)))
+      {
+! #ifndef FEAT_CLIPBOARD
+! 	/* check these explicitly for a more specific error message */
+! 	if (*ea.arg == '*' || *ea.arg == '+')
+  	{
+! 	    errormsg = (char_u *)_(e_invalidreg);
+! 	    goto doend;
+  	}
+  #endif
+! 	if (
+! #ifdef FEAT_USR_CMDS
+! 	    valid_yank_reg(*ea.arg, (ea.cmdidx != CMD_put
+! 						   && USER_CMDIDX(ea.cmdidx)))
+! #else
+! 	    valid_yank_reg(*ea.arg, ea.cmdidx != CMD_put)
+! #endif
+! 	   )
+! 	{
+! 	    ea.regname = *ea.arg++;
+! #ifdef FEAT_EVAL
+! 	    /* for '=' register: accept the rest of the line as an expression */
+! 	    if (ea.arg[-1] == '=' && ea.arg[0] != NUL)
+! 	    {
+! 		set_expr_line(vim_strsave(ea.arg));
+! 		ea.arg += STRLEN(ea.arg);
+! 	    }
+! #endif
+! 	    ea.arg = skipwhite(ea.arg);
+! 	}
+      }
+  
+      /*
+*** ../vim-7.3.170/src/globals.h	2011-02-15 17:39:14.000000000 +0100
+--- src/globals.h	2011-05-05 13:47:44.000000000 +0200
+***************
+*** 1561,1566 ****
+--- 1561,1569 ----
+  	(defined(FEAT_INS_EXPAND) && defined(FEAT_COMPL_FUNC))
+  EXTERN char_u e_notset[]	INIT(= N_("E764: Option '%s' is not set"));
+  #endif
++ #ifndef FEAT_CLIPBOARD
++ EXTERN char_u e_invalidreg[]    INIT(= N_("E850: Invalid register name"));
++ #endif
+  
+  #ifdef MACOS_X_UNIX
+  EXTERN short disallow_gui	INIT(= FALSE);
+*** ../vim-7.3.170/src/version.c	2011-04-28 19:05:01.000000000 +0200
+--- src/version.c	2011-05-05 14:24:39.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     171,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+53. To find out what time it is, you send yourself an e-mail and check the
+    "Date:" field.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.172 b/source/ap/vim/patches/7.3.172
new file mode 100644
index 00000000..66a78521
--- /dev/null
+++ b/source/ap/vim/patches/7.3.172
@@ -0,0 +1,268 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.172
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.172
+Problem:    MS-Windows: rename() might delete the file if the name differs but
+	    it's actually the same file.
+Solution:   Use the file handle to check if it's the same file. (Yukihiro
+	    Nakadaira)
+Files:	    src/if_cscope.c, src/fileio.c, src/os_win32.c,
+	    src/proto/os_win32.pro, src/vim.h
+
+
+*** ../vim-7.3.171/src/if_cscope.c	2011-03-03 15:01:25.000000000 +0100
+--- src/if_cscope.c	2011-05-05 16:16:38.000000000 +0200
+***************
+*** 1412,1428 ****
+  {
+      short	i, j;
+  #ifndef UNIX
+-     HANDLE	hFile;
+      BY_HANDLE_FILE_INFORMATION bhfi;
+  
+-     vim_memset(&bhfi, 0, sizeof(bhfi));
+      /* On windows 9x GetFileInformationByHandle doesn't work, so skip it */
+      if (!mch_windows95())
+      {
+! 	hFile = CreateFile(fname, FILE_READ_ATTRIBUTES, 0, NULL, OPEN_EXISTING,
+! 						 FILE_ATTRIBUTE_NORMAL, NULL);
+! 	if (hFile == INVALID_HANDLE_VALUE)
+  	{
+  	    if (p_csverbose)
+  	    {
+  		char *cant_msg = _("E625: cannot open cscope database: %s");
+--- 1412,1426 ----
+  {
+      short	i, j;
+  #ifndef UNIX
+      BY_HANDLE_FILE_INFORMATION bhfi;
+  
+      /* On windows 9x GetFileInformationByHandle doesn't work, so skip it */
+      if (!mch_windows95())
+      {
+! 	switch (win32_fileinfo(fname, &bhfi))
+  	{
++ 	case FILEINFO_ENC_FAIL:		/* enc_to_utf16() failed */
++ 	case FILEINFO_READ_FAIL:	/* CreateFile() failed */
+  	    if (p_csverbose)
+  	    {
+  		char *cant_msg = _("E625: cannot open cscope database: %s");
+***************
+*** 1438,1452 ****
+  		    (void)EMSG2(cant_msg, fname);
+  	    }
+  	    return -1;
+! 	}
+! 	if (!GetFileInformationByHandle(hFile, &bhfi))
+! 	{
+! 	    CloseHandle(hFile);
+  	    if (p_csverbose)
+  		(void)EMSG(_("E626: cannot get cscope database information"));
+  	    return -1;
+  	}
+- 	CloseHandle(hFile);
+      }
+  #endif
+  
+--- 1436,1447 ----
+  		    (void)EMSG2(cant_msg, fname);
+  	    }
+  	    return -1;
+! 
+! 	case FILEINFO_INFO_FAIL:    /* GetFileInformationByHandle() failed */
+  	    if (p_csverbose)
+  		(void)EMSG(_("E626: cannot get cscope database information"));
+  	    return -1;
+  	}
+      }
+  #endif
+  
+*** ../vim-7.3.171/src/fileio.c	2011-04-11 21:35:03.000000000 +0200
+--- src/fileio.c	2011-05-05 16:22:22.000000000 +0200
+***************
+*** 6555,6560 ****
+--- 6555,6575 ----
+  	    use_tmp_file = TRUE;
+      }
+  #endif
++ #ifdef WIN3264
++     {
++ 	BY_HANDLE_FILE_INFORMATION info1, info2;
++ 
++ 	/* It's possible for the source and destination to be the same file.
++ 	 * In that case go through a temp file name.  This makes rename("foo",
++ 	 * "./foo") a no-op (in a complicated way). */
++ 	if (win32_fileinfo(from, &info1) == FILEINFO_OK
++ 		&& win32_fileinfo(to, &info2) == FILEINFO_OK
++ 		&& info1.dwVolumeSerialNumber == info2.dwVolumeSerialNumber
++ 		&& info1.nFileIndexHigh == info2.nFileIndexHigh
++ 		&& info1.nFileIndexLow == info2.nFileIndexLow)
++ 	    use_tmp_file = TRUE;
++     }
++ #endif
+  
+  #if defined(UNIX) || defined(CASE_INSENSITIVE_FILENAME)
+      if (use_tmp_file)
+*** ../vim-7.3.171/src/os_win32.c	2011-02-01 13:48:47.000000000 +0100
+--- src/os_win32.c	2011-05-05 16:24:17.000000000 +0200
+***************
+*** 2645,2669 ****
+      int
+  mch_is_linked(char_u *fname)
+  {
+      HANDLE	hFile;
+!     int		res = 0;
+!     BY_HANDLE_FILE_INFORMATION inf;
+  #ifdef FEAT_MBYTE
+      WCHAR	*wn = NULL;
+  
+      if (enc_codepage >= 0 && (int)GetACP() != enc_codepage)
+  	wn = enc_to_utf16(fname, NULL);
+      if (wn != NULL)
+      {
+  	hFile = CreateFileW(wn,		/* file name */
+  		    GENERIC_READ,	/* access mode */
+! 		    0,			/* share mode */
+  		    NULL,		/* security descriptor */
+  		    OPEN_EXISTING,	/* creation disposition */
+! 		    0,			/* file attributes */
+  		    NULL);		/* handle to template file */
+  	if (hFile == INVALID_HANDLE_VALUE
+! 		&& GetLastError() == ERROR_CALL_NOT_IMPLEMENTED)
+  	{
+  	    /* Retry with non-wide function (for Windows 98). */
+  	    vim_free(wn);
+--- 2645,2688 ----
+      int
+  mch_is_linked(char_u *fname)
+  {
++     BY_HANDLE_FILE_INFORMATION info;
++ 
++     return win32_fileinfo(fname, &info) == FILEINFO_OK
++ 						   && info.nNumberOfLinks > 1;
++ }
++ 
++ /*
++  * Get the by-handle-file-information for "fname".
++  * Returns FILEINFO_OK when OK.
++  * returns FILEINFO_ENC_FAIL when enc_to_utf16() failed.
++  * Returns FILEINFO_READ_FAIL when CreateFile() failed.
++  * Returns FILEINFO_INFO_FAIL when GetFileInformationByHandle() failed.
++  */
++     int
++ win32_fileinfo(char_u *fname, BY_HANDLE_FILE_INFORMATION *info)
++ {
+      HANDLE	hFile;
+!     int		res = FILEINFO_READ_FAIL;
+  #ifdef FEAT_MBYTE
+      WCHAR	*wn = NULL;
+  
+      if (enc_codepage >= 0 && (int)GetACP() != enc_codepage)
++     {
+  	wn = enc_to_utf16(fname, NULL);
++ 	if (wn == NULL)
++ 	    res = FILEINFO_ENC_FAIL;
++     }
+      if (wn != NULL)
+      {
+  	hFile = CreateFileW(wn,		/* file name */
+  		    GENERIC_READ,	/* access mode */
+! 		    FILE_SHARE_READ | FILE_SHARE_WRITE,	/* share mode */
+  		    NULL,		/* security descriptor */
+  		    OPEN_EXISTING,	/* creation disposition */
+! 		    FILE_FLAG_BACKUP_SEMANTICS,	/* file attributes */
+  		    NULL);		/* handle to template file */
+  	if (hFile == INVALID_HANDLE_VALUE
+! 			      && GetLastError() == ERROR_CALL_NOT_IMPLEMENTED)
+  	{
+  	    /* Retry with non-wide function (for Windows 98). */
+  	    vim_free(wn);
+***************
+*** 2674,2690 ****
+  #endif
+  	hFile = CreateFile(fname,	/* file name */
+  		    GENERIC_READ,	/* access mode */
+! 		    0,			/* share mode */
+  		    NULL,		/* security descriptor */
+  		    OPEN_EXISTING,	/* creation disposition */
+! 		    0,			/* file attributes */
+  		    NULL);		/* handle to template file */
+  
+      if (hFile != INVALID_HANDLE_VALUE)
+      {
+! 	if (GetFileInformationByHandle(hFile, &inf) != 0
+! 		&& inf.nNumberOfLinks > 1)
+! 	    res = 1;
+  	CloseHandle(hFile);
+      }
+  
+--- 2693,2710 ----
+  #endif
+  	hFile = CreateFile(fname,	/* file name */
+  		    GENERIC_READ,	/* access mode */
+! 		    FILE_SHARE_READ | FILE_SHARE_WRITE,	/* share mode */
+  		    NULL,		/* security descriptor */
+  		    OPEN_EXISTING,	/* creation disposition */
+! 		    FILE_FLAG_BACKUP_SEMANTICS,	/* file attributes */
+  		    NULL);		/* handle to template file */
+  
+      if (hFile != INVALID_HANDLE_VALUE)
+      {
+! 	if (GetFileInformationByHandle(hFile, info) != 0)
+! 	    res = FILEINFO_OK;
+! 	else
+! 	    res = FILEINFO_INFO_FAIL;
+  	CloseHandle(hFile);
+      }
+  
+*** ../vim-7.3.171/src/proto/os_win32.pro	2010-10-23 14:02:48.000000000 +0200
+--- src/proto/os_win32.pro	2011-05-05 16:17:42.000000000 +0200
+***************
+*** 21,26 ****
+--- 21,27 ----
+  void mch_hide __ARGS((char_u *name));
+  int mch_isdir __ARGS((char_u *name));
+  int mch_is_linked __ARGS((char_u *fname));
++ int win32_fileinfo __ARGS((char_u *name, BY_HANDLE_FILE_INFORMATION *lpFileInfo));
+  int mch_writable __ARGS((char_u *name));
+  int mch_can_exe __ARGS((char_u *name));
+  int mch_nodetype __ARGS((char_u *name));
+*** ../vim-7.3.171/src/vim.h	2011-04-11 21:35:03.000000000 +0200
+--- src/vim.h	2011-05-05 16:16:57.000000000 +0200
+***************
+*** 2217,2220 ****
+--- 2217,2226 ----
+  #define KEYLEN_PART_MAP -2	/* keylen value for incomplete mapping */
+  #define KEYLEN_REMOVED  9999	/* keylen value for removed sequence */
+  
++ /* Return values from win32_fileinfo(). */
++ #define FILEINFO_OK	     0
++ #define FILEINFO_ENC_FAIL    1	/* enc_to_utf16() failed */
++ #define FILEINFO_READ_FAIL   2	/* CreateFile() failed */
++ #define FILEINFO_INFO_FAIL   3	/* GetFileInformationByHandle() failed */
++ 
+  #endif /* VIM__H */
+*** ../vim-7.3.171/src/version.c	2011-05-05 14:26:37.000000000 +0200
+--- src/version.c	2011-05-05 16:39:35.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     172,
+  /**/
+
+-- 
+Q: What is a patch 22?
+A: A patch you need to include to make it possible to include patches.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.173 b/source/ap/vim/patches/7.3.173
new file mode 100644
index 00000000..ac8cffb9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.173
@@ -0,0 +1,79 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.173
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.173
+Problem:    After using setqflist() to make the quickfix list empty ":cwindow"
+	    may open the window anyway.  Also after ":vimgrep".
+Solution:   Correctly check whether the list is empty. (Ingo Karkat)
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.172/src/quickfix.c	2011-04-28 17:27:05.000000000 +0200
+--- src/quickfix.c	2011-05-05 16:55:47.000000000 +0200
+***************
+*** 1164,1170 ****
+  
+  	/* When no valid entries are present in the list, qf_ptr points to
+  	 * the first item in the list */
+! 	if (to_qfl->qf_nonevalid == TRUE)
+  	    to_qfl->qf_ptr = to_qfl->qf_start;
+      }
+  
+--- 1164,1170 ----
+  
+  	/* When no valid entries are present in the list, qf_ptr points to
+  	 * the first item in the list */
+! 	if (to_qfl->qf_nonevalid)
+  	    to_qfl->qf_ptr = to_qfl->qf_start;
+      }
+  
+***************
+*** 2243,2248 ****
+--- 2243,2249 ----
+       * it if we have errors; otherwise, leave it closed.
+       */
+      if (qi->qf_lists[qi->qf_curlist].qf_nonevalid
++ 	    || qi->qf_lists[qi->qf_curlist].qf_count == 0
+  	    || qi->qf_curlist >= qi->qf_listcount)
+      {
+  	if (win != NULL)
+***************
+*** 3711,3717 ****
+      }
+  
+      if (qi->qf_lists[qi->qf_curlist].qf_index == 0)
+! 	/* empty list or no valid entry */
+  	qi->qf_lists[qi->qf_curlist].qf_nonevalid = TRUE;
+      else
+  	qi->qf_lists[qi->qf_curlist].qf_nonevalid = FALSE;
+--- 3712,3718 ----
+      }
+  
+      if (qi->qf_lists[qi->qf_curlist].qf_index == 0)
+! 	/* no valid entry */
+  	qi->qf_lists[qi->qf_curlist].qf_nonevalid = TRUE;
+      else
+  	qi->qf_lists[qi->qf_curlist].qf_nonevalid = FALSE;
+*** ../vim-7.3.172/src/version.c	2011-05-05 16:41:19.000000000 +0200
+--- src/version.c	2011-05-05 17:11:57.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     173,
+  /**/
+
+-- 
+"I can't complain, but sometimes I still do."   (Joe Walsh)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.174 b/source/ap/vim/patches/7.3.174
new file mode 100644
index 00000000..33d60035
--- /dev/null
+++ b/source/ap/vim/patches/7.3.174
@@ -0,0 +1,109 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.174
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.174
+Problem:    When Exuberant ctags binary is exctags it's not found.
+Solution:   Add configure check for exctags. (Hong Xu)
+Files:	    src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.173/src/configure.in	2011-02-09 17:42:53.000000000 +0100
+--- src/configure.in	2011-05-05 17:18:21.000000000 +0200
+***************
+*** 2619,2625 ****
+    dnl  On HP-UX 10.10 termcap or termlib should be used instead of
+    dnl  curses, because curses is much slower.
+    dnl  Newer versions of ncurses are preferred over anything, except
+!   dnl  when tinfo has been split off, it conains all we need.
+    dnl  Older versions of ncurses have bugs, get a new one!
+    dnl  Digital Unix (OSF1) should use curses (Ronald Schild).
+    dnl  On SCO Openserver should prefer termlib (Roger Cornelius).
+--- 2619,2625 ----
+    dnl  On HP-UX 10.10 termcap or termlib should be used instead of
+    dnl  curses, because curses is much slower.
+    dnl  Newer versions of ncurses are preferred over anything, except
+!   dnl  when tinfo has been split off, it contains all we need.
+    dnl  Older versions of ncurses have bugs, get a new one!
+    dnl  Digital Unix (OSF1) should use curses (Ronald Schild).
+    dnl  On SCO Openserver should prefer termlib (Roger Cornelius).
+***************
+*** 3370,3376 ****
+  AC_CHECK_LIB(xpg4, _xpg4_setrunelocale, [LIBS="$LIBS -lxpg4"],,)
+  
+  dnl Check how we can run ctags.  Default to "ctags" when nothing works.
+! dnl --version for Exuberant ctags (preferred)
+  dnl       Add --fields=+S to get function signatures for omni completion.
+  dnl -t for typedefs (many ctags have this)
+  dnl -s for static functions (Elvis ctags only?)
+--- 3370,3376 ----
+  AC_CHECK_LIB(xpg4, _xpg4_setrunelocale, [LIBS="$LIBS -lxpg4"],,)
+  
+  dnl Check how we can run ctags.  Default to "ctags" when nothing works.
+! dnl Use --version to detect Exuberant ctags (preferred)
+  dnl       Add --fields=+S to get function signatures for omni completion.
+  dnl -t for typedefs (many ctags have this)
+  dnl -s for static functions (Elvis ctags only?)
+***************
+*** 3378,3384 ****
+  dnl -i+m to test for older Exuberant ctags
+  AC_MSG_CHECKING(how to create tags)
+  test -f tags && mv tags tags.save
+! if (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+--- 3378,3386 ----
+  dnl -i+m to test for older Exuberant ctags
+  AC_MSG_CHECKING(how to create tags)
+  test -f tags && mv tags tags.save
+! if (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+!   TAGPRG="exctags -I INIT+ --fields=+S"
+! elif (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+*** ../vim-7.3.173/src/auto/configure	2011-02-09 17:42:53.000000000 +0100
+--- src/auto/configure	2011-05-05 17:19:26.000000000 +0200
+***************
+*** 12031,12037 ****
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create tags" >&5
+  $as_echo_n "checking how to create tags... " >&6; }
+  test -f tags && mv tags tags.save
+! if (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+--- 12031,12039 ----
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create tags" >&5
+  $as_echo_n "checking how to create tags... " >&6; }
+  test -f tags && mv tags tags.save
+! if (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+!   TAGPRG="exctags -I INIT+ --fields=+S"
+! elif (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+*** ../vim-7.3.173/src/version.c	2011-05-05 17:14:07.000000000 +0200
+--- src/version.c	2011-05-05 17:19:37.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     174,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+54. You start tilting your head sideways to smile. :-)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.175 b/source/ap/vim/patches/7.3.175
new file mode 100644
index 00000000..57fbc4a7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.175
@@ -0,0 +1,50 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.175
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.175
+Problem:    When 'colorcolumn' is set locally to a window, ":new" opens a
+	    window with the same highlighting but 'colorcolumn' is empty.
+	    (Tyru)
+Solution:   Call check_colorcolumn() after clearing and copying options.
+	    (Christian Brabandt)
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.174/src/buffer.c	2011-04-11 16:56:29.000000000 +0200
+--- src/buffer.c	2011-05-05 17:28:24.000000000 +0200
+***************
+*** 2527,2532 ****
+--- 2527,2535 ----
+      if (p_fdls >= 0)
+  	curwin->w_p_fdl = p_fdls;
+  #endif
++ #ifdef FEAT_SYN_HL
++     check_colorcolumn(curwin);
++ #endif
+  }
+  
+  /*
+*** ../vim-7.3.174/src/version.c	2011-05-05 17:23:58.000000000 +0200
+--- src/version.c	2011-05-05 17:30:32.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     175,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+55. You ask your doctor to implant a gig in your brain.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.176 b/source/ap/vim/patches/7.3.176
new file mode 100644
index 00000000..fcf4880d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.176
@@ -0,0 +1,165 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.176
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.176
+Problem:    Ruby linking doesn't work properly on Mac OS X.
+Solution:   Fix the configure check for Ruby. (Bjorn Winckler)
+Files:	    src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.175/src/configure.in	2011-05-05 17:23:58.000000000 +0200
+--- src/configure.in	2011-05-05 18:03:38.000000000 +0200
+***************
+*** 1387,1396 ****
+  AC_MSG_RESULT($enable_rubyinterp)
+  if test "$enable_rubyinterp" = "yes" -o "$enable_rubyinterp" = "dynamic"; then
+    AC_MSG_CHECKING(--with-ruby-command argument)
+    AC_ARG_WITH(ruby-command, [  --with-ruby-command=RUBY  name of the Ruby command (default: ruby)],
+! 	RUBY_CMD="$withval"; AC_MSG_RESULT($RUBY_CMD),
+  	RUBY_CMD="ruby"; AC_MSG_RESULT(defaulting to $RUBY_CMD))
+-   AC_SUBST(vi_cv_path_ruby)
+    AC_PATH_PROG(vi_cv_path_ruby, $RUBY_CMD)
+    if test "X$vi_cv_path_ruby" != "X"; then
+      AC_MSG_CHECKING(Ruby version)
+--- 1387,1396 ----
+  AC_MSG_RESULT($enable_rubyinterp)
+  if test "$enable_rubyinterp" = "yes" -o "$enable_rubyinterp" = "dynamic"; then
+    AC_MSG_CHECKING(--with-ruby-command argument)
++   AC_SUBST(vi_cv_path_ruby)
+    AC_ARG_WITH(ruby-command, [  --with-ruby-command=RUBY  name of the Ruby command (default: ruby)],
+! 	RUBY_CMD="$withval"; vi_cv_path_ruby="$withval"; AC_MSG_RESULT($RUBY_CMD),
+  	RUBY_CMD="ruby"; AC_MSG_RESULT(defaulting to $RUBY_CMD))
+    AC_PATH_PROG(vi_cv_path_ruby, $RUBY_CMD)
+    if test "X$vi_cv_path_ruby" != "X"; then
+      AC_MSG_CHECKING(Ruby version)
+***************
+*** 1412,1429 ****
+  	  RUBY_LIBS="$rubylibs"
+  	fi
+  	librubyarg=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG[["LIBRUBYARG"]])'`
+! 	if test -f "$rubyhdrdir/$librubyarg"; then
+! 	  librubyarg="$rubyhdrdir/$librubyarg"
+! 	else
+! 	  rubylibdir=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG[["libdir"]])'`
+! 	  if test -f "$rubylibdir/$librubyarg"; then
+! 	    librubyarg="$rubylibdir/$librubyarg"
+! 	  elif test "$librubyarg" = "libruby.a"; then
+! 	    dnl required on Mac OS 10.3 where libruby.a doesn't exist
+! 	    librubyarg="-lruby"
+! 	  else
+! 	    librubyarg=`$vi_cv_path_ruby -r rbconfig -e "print '$librubyarg'.gsub(/-L\./, %'-L#{Config.expand(Config::CONFIG[\"libdir\"])}')"`
+! 	  fi
+  	fi
+  
+  	if test "X$librubyarg" != "X"; then
+--- 1412,1426 ----
+  	  RUBY_LIBS="$rubylibs"
+  	fi
+  	librubyarg=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG[["LIBRUBYARG"]])'`
+! 	librubya=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG[["LIBRUBY_A"]])'`
+!   rubylibdir=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG[["libdir"]])'`
+! 	if test -f "$rubylibdir/$librubya"; then
+! 	  librubyarg="$librubyarg"
+!     RUBY_LIBS="$RUBY_LIBS -L$rubylibdir"
+!   elif test "$librubyarg" = "libruby.a"; then
+!     dnl required on Mac OS 10.3 where libruby.a doesn't exist
+!     librubyarg="-lruby"
+!     RUBY_LIBS="$RUBY_LIBS -L$rubylibdir"
+  	fi
+  
+  	if test "X$librubyarg" != "X"; then
+*** ../vim-7.3.175/src/auto/configure	2011-05-05 17:23:58.000000000 +0200
+--- src/auto/configure	2011-05-05 18:06:47.000000000 +0200
+***************
+*** 6218,6233 ****
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking --with-ruby-command argument" >&5
+  $as_echo_n "checking --with-ruby-command argument... " >&6; }
+  
+  # Check whether --with-ruby-command was given.
+  if test "${with_ruby_command+set}" = set; then :
+!   withval=$with_ruby_command; RUBY_CMD="$withval"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RUBY_CMD" >&5
+  $as_echo "$RUBY_CMD" >&6; }
+  else
+    RUBY_CMD="ruby"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: defaulting to $RUBY_CMD" >&5
+  $as_echo "defaulting to $RUBY_CMD" >&6; }
+  fi
+  
+- 
+    # Extract the first word of "$RUBY_CMD", so it can be a program name with args.
+  set dummy $RUBY_CMD; ac_word=$2
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+--- 6218,6233 ----
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking --with-ruby-command argument" >&5
+  $as_echo_n "checking --with-ruby-command argument... " >&6; }
+  
++ 
+  # Check whether --with-ruby-command was given.
+  if test "${with_ruby_command+set}" = set; then :
+!   withval=$with_ruby_command; RUBY_CMD="$withval"; vi_cv_path_ruby="$withval"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RUBY_CMD" >&5
+  $as_echo "$RUBY_CMD" >&6; }
+  else
+    RUBY_CMD="ruby"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: defaulting to $RUBY_CMD" >&5
+  $as_echo "defaulting to $RUBY_CMD" >&6; }
+  fi
+  
+    # Extract the first word of "$RUBY_CMD", so it can be a program name with args.
+  set dummy $RUBY_CMD; ac_word=$2
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+***************
+*** 6292,6308 ****
+  	  RUBY_LIBS="$rubylibs"
+  	fi
+  	librubyarg=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG["LIBRUBYARG"])'`
+! 	if test -f "$rubyhdrdir/$librubyarg"; then
+! 	  librubyarg="$rubyhdrdir/$librubyarg"
+! 	else
+! 	  rubylibdir=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG["libdir"])'`
+! 	  if test -f "$rubylibdir/$librubyarg"; then
+! 	    librubyarg="$rubylibdir/$librubyarg"
+! 	  elif test "$librubyarg" = "libruby.a"; then
+! 	    	    librubyarg="-lruby"
+! 	  else
+! 	    librubyarg=`$vi_cv_path_ruby -r rbconfig -e "print '$librubyarg'.gsub(/-L\./, %'-L#{Config.expand(Config::CONFIG[\"libdir\"])}')"`
+! 	  fi
+  	fi
+  
+  	if test "X$librubyarg" != "X"; then
+--- 6292,6305 ----
+  	  RUBY_LIBS="$rubylibs"
+  	fi
+  	librubyarg=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG["LIBRUBYARG"])'`
+! 	librubya=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG["LIBRUBY_A"])'`
+!   rubylibdir=`$vi_cv_path_ruby -r rbconfig -e 'print Config.expand(Config::CONFIG["libdir"])'`
+! 	if test -f "$rubylibdir/$librubya"; then
+! 	  librubyarg="$librubyarg"
+!     RUBY_LIBS="$RUBY_LIBS -L$rubylibdir"
+!   elif test "$librubyarg" = "libruby.a"; then
+!         librubyarg="-lruby"
+!     RUBY_LIBS="$RUBY_LIBS -L$rubylibdir"
+  	fi
+  
+  	if test "X$librubyarg" != "X"; then
+*** ../vim-7.3.175/src/version.c	2011-05-05 17:32:40.000000000 +0200
+--- src/version.c	2011-05-05 18:08:52.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     176,
+  /**/
+
+-- 
+"I simultaneously try to keep my head in the clouds and my feet on the
+ground.  Sometimes it's a stretch, though."              -- Larry Wall
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.177 b/source/ap/vim/patches/7.3.177
new file mode 100644
index 00000000..895b3b13
--- /dev/null
+++ b/source/ap/vim/patches/7.3.177
@@ -0,0 +1,97 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.177
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.177
+Problem:    MS-Windows: mkdir() doesn't work properly when 'encoding' is
+	    "utf-8".
+Solution:   Convert to utf-16. (Yukihiro Nakadaira)
+Files:	    src/os_win32.c, src/os_win32.h, src/proto/os_win32.pro
+
+
+*** ../vim-7.3.176/src/os_win32.c	2011-05-05 16:41:19.000000000 +0200
+--- src/os_win32.c	2011-05-05 18:24:36.000000000 +0200
+***************
+*** 2640,2645 ****
+--- 2640,2669 ----
+  }
+  
+  /*
++  * Create directory "name".
++  * Return 0 on success, -1 on error.
++  */
++     int
++ mch_mkdir(char_u *name)
++ {
++ #ifdef FEAT_MBYTE
++     if (enc_codepage >= 0 && (int)GetACP() != enc_codepage)
++     {
++ 	WCHAR	*p;
++ 	int	retval;
++ 
++ 	p = enc_to_utf16(name, NULL);
++ 	if (p == NULL)
++ 	    return -1;
++ 	retval = _wmkdir(p);
++ 	vim_free(p);
++ 	return retval;
++     }
++ #endif
++     return _mkdir(name);
++ }
++ 
++ /*
+   * Return TRUE if file "fname" has more than one link.
+   */
+      int
+*** ../vim-7.3.176/src/os_win32.h	2010-08-15 21:57:30.000000000 +0200
+--- src/os_win32.h	2011-05-05 18:25:44.000000000 +0200
+***************
+*** 191,195 ****
+  #ifdef __BORLANDC__
+  # define vim_mkdir(x, y) mkdir(x)
+  #else
+! # define vim_mkdir(x, y) _mkdir(x)
+  #endif
+--- 191,195 ----
+  #ifdef __BORLANDC__
+  # define vim_mkdir(x, y) mkdir(x)
+  #else
+! # define vim_mkdir(x, y) mch_mkdir(x)
+  #endif
+*** ../vim-7.3.176/src/proto/os_win32.pro	2011-05-05 16:41:19.000000000 +0200
+--- src/proto/os_win32.pro	2011-05-05 18:26:20.000000000 +0200
+***************
+*** 20,25 ****
+--- 20,26 ----
+  int mch_setperm __ARGS((char_u *name, long perm));
+  void mch_hide __ARGS((char_u *name));
+  int mch_isdir __ARGS((char_u *name));
++ int mch_mkdir __ARGS((char_u *name));
+  int mch_is_linked __ARGS((char_u *fname));
+  int win32_fileinfo __ARGS((char_u *name, BY_HANDLE_FILE_INFORMATION *lpFileInfo));
+  int mch_writable __ARGS((char_u *name));
+*** ../vim-7.3.176/src/version.c	2011-05-05 18:10:11.000000000 +0200
+--- src/version.c	2011-05-05 18:27:56.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     177,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+56. You leave the modem speaker on after connecting because you think it
+    sounds like the ocean wind...the perfect soundtrack for "surfing the net".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.178 b/source/ap/vim/patches/7.3.178
new file mode 100644
index 00000000..9b6ca7c3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.178
@@ -0,0 +1,163 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.178
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.178
+Problem:    C-indent doesn't handle code right after { correctly.
+Solution:   Fix detecting unterminated line. (Lech Lorens)
+Files:      src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+    
+
+*** ../vim-7.3.177/src/misc1.c	2011-04-28 17:48:39.000000000 +0200
+--- src/misc1.c	2011-05-10 11:35:09.000000000 +0200
+***************
+*** 4983,4989 ****
+  }
+  
+  /*
+!  * Return TRUE if there there is no code at *s.  White space and comments are
+   * not considered code.
+   */
+      static int
+--- 4983,4989 ----
+  }
+  
+  /*
+!  * Return TRUE if there is no code at *s.  White space and comments are
+   * not considered code.
+   */
+      static int
+***************
+*** 5458,5465 ****
+  }
+  
+  /*
+!  * Recognize a line that starts with '{' or '}', or ends with ';', '{' or '}'.
+   * Don't consider "} else" a terminated line.
+   * Return the character terminating the line (ending char's have precedence if
+   * both apply in order to determine initializations).
+   */
+--- 5458,5468 ----
+  }
+  
+  /*
+!  * Recognize a line that starts with '{' or '}', or ends with ';', ',', '{' or
+!  * '}'.
+   * Don't consider "} else" a terminated line.
++  * Don't consider a line where there are unmatched opening braces before '}',
++  * ';' or ',' a terminated line.
+   * Return the character terminating the line (ending char's have precedence if
+   * both apply in order to determine initializations).
+   */
+***************
+*** 5470,5475 ****
+--- 5473,5479 ----
+      int		incl_comma;	/* recognize a trailing comma */
+  {
+      char_u found_start = 0;
++     unsigned n_open = 0;
+  
+      s = cin_skipcomment(s);
+  
+***************
+*** 5480,5489 ****
+      {
+  	/* skip over comments, "" strings and 'c'haracters */
+  	s = skip_string(cin_skipcomment(s));
+! 	if ((*s == ';' || (incl_open && *s == '{') || *s == '}'
+! 						 || (incl_comma && *s == ','))
+  		&& cin_nocode(s + 1))
+  	    return *s;
+  
+  	if (*s)
+  	    s++;
+--- 5484,5502 ----
+      {
+  	/* skip over comments, "" strings and 'c'haracters */
+  	s = skip_string(cin_skipcomment(s));
+! 	if (*s == '}' && n_open > 0)
+! 	    --n_open;
+! 	if (n_open == 0
+! 		&& (*s == ';' || *s == '}' || (incl_comma && *s == ','))
+  		&& cin_nocode(s + 1))
+  	    return *s;
++ 	else if (*s == '{')
++ 	{
++ 	    if (incl_open && cin_nocode(s + 1))
++ 		return *s;
++ 	    else
++ 		++n_open;
++ 	}
+  
+  	if (*s)
+  	    s++;
+*** ../vim-7.3.177/src/testdir/test3.in	2011-04-28 13:01:59.000000000 +0200
+--- src/testdir/test3.in	2011-05-10 11:34:13.000000000 +0200
+***************
+*** 1344,1349 ****
+--- 1344,1365 ----
+  }
+  
+  STARTTEST
++ :set cino&
++ 2kdd=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if(x==y)
++ 		if(y==z)
++ 			foo=1;
++ 		else { bar=1;
++ 			baz=2;
++ 		}
++ 	printf("Foo!\n");
++ }
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.177/src/testdir/test3.ok	2011-04-28 13:01:59.000000000 +0200
+--- src/testdir/test3.ok	2011-05-10 11:34:13.000000000 +0200
+***************
+*** 1204,1206 ****
+--- 1204,1218 ----
+  {
+  }
+  
++ 
++ void func(void)
++ {
++ 	if(x==y)
++ 		if(y==z)
++ 			foo=1;
++ 		else { bar=1;
++ 			baz=2;
++ 		}
++ 	printf("Foo!\n");
++ }
++ 
+*** ../vim-7.3.177/src/version.c	2011-05-05 18:31:54.000000000 +0200
+--- src/version.c	2011-05-10 11:37:43.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     178,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+69. Yahoo welcomes you with your own start page
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.179 b/source/ap/vim/patches/7.3.179
new file mode 100644
index 00000000..f175b264
--- /dev/null
+++ b/source/ap/vim/patches/7.3.179
@@ -0,0 +1,95 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.179
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.179
+Problem:    C-indent doesn't handle colon in string correctly.
+Solution:   Skip the string. (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.178/src/misc1.c	2011-05-10 11:39:13.000000000 +0200
+--- src/misc1.c	2011-05-10 11:50:14.000000000 +0200
+***************
+*** 5801,5807 ****
+  		continue;
+  	}
+  
+! 	if (s[0] == ':')
+  	{
+  	    if (s[1] == ':')
+  	    {
+--- 5801,5809 ----
+  		continue;
+  	}
+  
+! 	if (s[0] == '"')
+! 	    s = skip_string(s) + 1;
+! 	else if (s[0] == ':')
+  	{
+  	    if (s[1] == ':')
+  	    {
+*** ../vim-7.3.178/src/testdir/test3.in	2011-05-10 11:39:13.000000000 +0200
+--- src/testdir/test3.in	2011-05-10 11:53:02.000000000 +0200
+***************
+*** 1360,1365 ****
+--- 1360,1378 ----
+  }
+  
+  STARTTEST
++ :set cino&
++ 2kdd=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	cout << "a"
++ 	<< "b"
++ 	<< ") :"
++ 	<< "c";
++ }
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.178/src/testdir/test3.ok	2011-05-10 11:39:13.000000000 +0200
+--- src/testdir/test3.ok	2011-05-10 11:50:14.000000000 +0200
+***************
+*** 1216,1218 ****
+--- 1216,1227 ----
+  	printf("Foo!\n");
+  }
+  
++ 
++ void func(void)
++ {
++ 	cout << "a"
++ 		<< "b"
++ 		<< ") :"
++ 		<< "c";
++ }
++ 
+*** ../vim-7.3.178/src/version.c	2011-05-10 11:39:13.000000000 +0200
+--- src/version.c	2011-05-10 11:53:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     179,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+71. You wonder how people walk
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.180 b/source/ap/vim/patches/7.3.180
new file mode 100644
index 00000000..5997bfbe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.180
@@ -0,0 +1,295 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.180
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.180
+Problem:    When both a middle part of 'comments' matches and an end part, the
+	    middle part was used errornously.
+Solution:   After finding the middle part match continue looking for a better
+	    end part match. (partly by Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.179/src/misc1.c	2011-05-10 11:56:26.000000000 +0200
+--- src/misc1.c	2011-05-10 13:24:38.000000000 +0200
+***************
+*** 1561,1566 ****
+--- 1561,1569 ----
+      char_u	part_buf[COM_MAX_LEN];	/* buffer for one option part */
+      char_u	*string;		/* pointer to comment string */
+      char_u	*list;
++     int		middle_match_len = 0;
++     char_u	*prev_list;
++     char_u	*saved_flags;
+  
+      i = 0;
+      while (vim_iswhite(line[i]))    /* leading white space is ignored */
+***************
+*** 1569,1575 ****
+      /*
+       * Repeat to match several nested comment strings.
+       */
+!     while (line[i])
+      {
+  	/*
+  	 * scan through the 'comments' option for a match
+--- 1572,1578 ----
+      /*
+       * Repeat to match several nested comment strings.
+       */
+!     while (line[i] != NUL)
+      {
+  	/*
+  	 * scan through the 'comments' option for a match
+***************
+*** 1577,1658 ****
+  	found_one = FALSE;
+  	for (list = curbuf->b_p_com; *list; )
+  	{
+! 	    /*
+! 	     * Get one option part into part_buf[].  Advance list to next one.
+! 	     * put string at start of string.
+! 	     */
+! 	    if (!got_com && flags != NULL)  /* remember where flags started */
+! 		*flags = list;
+  	    (void)copy_option_part(&list, part_buf, COM_MAX_LEN, ",");
+  	    string = vim_strchr(part_buf, ':');
+  	    if (string == NULL)	    /* missing ':', ignore this part */
+  		continue;
+  	    *string++ = NUL;	    /* isolate flags from string */
+  
+! 	    /*
+! 	     * When already found a nested comment, only accept further
+! 	     * nested comments.
+! 	     */
+  	    if (got_com && vim_strchr(part_buf, COM_NEST) == NULL)
+  		continue;
+  
+! 	    /* When 'O' flag used don't use for "O" command */
+  	    if (backward && vim_strchr(part_buf, COM_NOBACK) != NULL)
+  		continue;
+  
+! 	    /*
+! 	     * Line contents and string must match.
+  	     * When string starts with white space, must have some white space
+  	     * (but the amount does not need to match, there might be a mix of
+! 	     * TABs and spaces).
+! 	     */
+  	    if (vim_iswhite(string[0]))
+  	    {
+  		if (i == 0 || !vim_iswhite(line[i - 1]))
+! 		    continue;
+  		while (vim_iswhite(string[0]))
+  		    ++string;
+  	    }
+  	    for (j = 0; string[j] != NUL && string[j] == line[i + j]; ++j)
+  		;
+  	    if (string[j] != NUL)
+! 		continue;
+  
+! 	    /*
+! 	     * When 'b' flag used, there must be white space or an
+! 	     * end-of-line after the string in the line.
+! 	     */
+  	    if (vim_strchr(part_buf, COM_BLANK) != NULL
+  			   && !vim_iswhite(line[i + j]) && line[i + j] != NUL)
+  		continue;
+  
+! 	    /*
+! 	     * We have found a match, stop searching.
+! 	     */
+! 	    i += j;
+! 	    got_com = TRUE;
+  	    found_one = TRUE;
+  	    break;
+  	}
+  
+! 	/*
+! 	 * No match found, stop scanning.
+! 	 */
+  	if (!found_one)
+  	    break;
+  
+! 	/*
+! 	 * Include any trailing white space.
+! 	 */
+  	while (vim_iswhite(line[i]))
+  	    ++i;
+  
+! 	/*
+! 	 * If this comment doesn't nest, stop here.
+! 	 */
+  	if (vim_strchr(part_buf, COM_NEST) == NULL)
+  	    break;
+      }
+      return (got_com ? i : 0);
+  }
+  #endif
+--- 1580,1683 ----
+  	found_one = FALSE;
+  	for (list = curbuf->b_p_com; *list; )
+  	{
+! 	    /* Get one option part into part_buf[].  Advance "list" to next
+! 	     * one.  Put "string" at start of string.  */
+! 	    if (!got_com && flags != NULL)
+! 		*flags = list;	    /* remember where flags started */
+! 	    prev_list = list;
+  	    (void)copy_option_part(&list, part_buf, COM_MAX_LEN, ",");
+  	    string = vim_strchr(part_buf, ':');
+  	    if (string == NULL)	    /* missing ':', ignore this part */
+  		continue;
+  	    *string++ = NUL;	    /* isolate flags from string */
+  
+! 	    /* If we found a middle match previously, use that match when this
+! 	     * is not a middle or end. */
+! 	    if (middle_match_len != 0
+! 		    && vim_strchr(part_buf, COM_MIDDLE) == NULL
+! 		    && vim_strchr(part_buf, COM_END) == NULL)
+! 		break;
+! 
+! 	    /* When we already found a nested comment, only accept further
+! 	     * nested comments. */
+  	    if (got_com && vim_strchr(part_buf, COM_NEST) == NULL)
+  		continue;
+  
+! 	    /* When 'O' flag present and using "O" command skip this one. */
+  	    if (backward && vim_strchr(part_buf, COM_NOBACK) != NULL)
+  		continue;
+  
+! 	    /* Line contents and string must match.
+  	     * When string starts with white space, must have some white space
+  	     * (but the amount does not need to match, there might be a mix of
+! 	     * TABs and spaces). */
+  	    if (vim_iswhite(string[0]))
+  	    {
+  		if (i == 0 || !vim_iswhite(line[i - 1]))
+! 		    continue;  /* missing shite space */
+  		while (vim_iswhite(string[0]))
+  		    ++string;
+  	    }
+  	    for (j = 0; string[j] != NUL && string[j] == line[i + j]; ++j)
+  		;
+  	    if (string[j] != NUL)
+! 		continue;  /* string doesn't match */
+  
+! 	    /* When 'b' flag used, there must be white space or an
+! 	     * end-of-line after the string in the line. */
+  	    if (vim_strchr(part_buf, COM_BLANK) != NULL
+  			   && !vim_iswhite(line[i + j]) && line[i + j] != NUL)
+  		continue;
+  
+! 	    /* We have found a match, stop searching unless this is a middle
+! 	     * comment. The middle comment can be a substring of the end
+! 	     * comment in which case it's better to return the length of the
+! 	     * end comment and its flags.  Thus we keep searching with middle
+! 	     * and end matches and use an end match if it matches better. */
+! 	    if (vim_strchr(part_buf, COM_MIDDLE) != NULL)
+! 	    {
+! 		if (middle_match_len == 0)
+! 		{
+! 		    middle_match_len = j;
+! 		    saved_flags = prev_list;
+! 		}
+! 		continue;
+! 	    }
+! 	    if (middle_match_len != 0 && j > middle_match_len)
+! 		/* Use this match instead of the middle match, since it's a
+! 		 * longer thus better match. */
+! 		middle_match_len = 0;
+! 
+! 	    if (middle_match_len == 0)
+! 		i += j;
+  	    found_one = TRUE;
+  	    break;
+  	}
+  
+! 	if (middle_match_len != 0)
+! 	{
+! 	    /* Use the previously found middle match after failing to find a
+! 	     * match with an end. */
+! 	    if (!got_com && flags != NULL)
+! 		*flags = saved_flags;
+! 	    i += middle_match_len;
+! 	    found_one = TRUE;
+! 	}
+! 
+! 	/* No match found, stop scanning. */
+  	if (!found_one)
+  	    break;
+  
+! 	/* Include any trailing white space. */
+  	while (vim_iswhite(line[i]))
+  	    ++i;
+  
+! 	/* If this comment doesn't nest, stop here. */
+! 	got_com = TRUE;
+  	if (vim_strchr(part_buf, COM_NEST) == NULL)
+  	    break;
+      }
++ 
+      return (got_com ? i : 0);
+  }
+  #endif
+*** ../vim-7.3.179/src/testdir/test3.in	2011-05-10 11:56:26.000000000 +0200
+--- src/testdir/test3.in	2011-05-10 12:05:50.000000000 +0200
+***************
+*** 1373,1378 ****
+--- 1373,1390 ----
+  }
+  
+  STARTTEST
++ :set com=s1:/*,m:*,ex:*/
++ ]]3jofoo();
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	/*
++ 	 * This is a comment.
++ 	 */
++ }
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.179/src/testdir/test3.ok	2011-05-10 11:56:26.000000000 +0200
+--- src/testdir/test3.ok	2011-05-10 12:05:50.000000000 +0200
+***************
+*** 1225,1227 ****
+--- 1225,1236 ----
+  		<< "c";
+  }
+  
++ 
++ void func(void)
++ {
++ 	/*
++ 	 * This is a comment.
++ 	 */
++ 	foo();
++ }
++ 
+*** ../vim-7.3.179/src/version.c	2011-05-10 11:56:26.000000000 +0200
+--- src/version.c	2011-05-10 13:37:28.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     180,
+  /**/
+
+-- 
+"Thou shalt not follow the Null Pointer, for at its end Chaos and
+Madness lie."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.181 b/source/ap/vim/patches/7.3.181
new file mode 100644
index 00000000..3151d445
--- /dev/null
+++ b/source/ap/vim/patches/7.3.181
@@ -0,0 +1,171 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.181
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.181
+Problem:    When repeating the insert of CTRL-V or a digraph the display may
+	    not be updated correctly.
+Solution:   Only call edit_unputchar() after edit_putchar(). (Lech Lorens)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.180/src/edit.c	2010-11-10 17:11:29.000000000 +0100
+--- src/edit.c	2011-05-10 14:16:41.000000000 +0200
+***************
+*** 1553,1564 ****
+--- 1553,1568 ----
+  ins_ctrl_v()
+  {
+      int		c;
++     int		did_putchar = FALSE;
+  
+      /* may need to redraw when no more chars available now */
+      ins_redraw(FALSE);
+  
+      if (redrawing() && !char_avail())
++     {
+  	edit_putchar('^', TRUE);
++ 	did_putchar = TRUE;
++     }
+      AppendToRedobuff((char_u *)CTRL_V_STR);	/* CTRL-V */
+  
+  #ifdef FEAT_CMDL_INFO
+***************
+*** 1566,1573 ****
+  #endif
+  
+      c = get_literal();
+!     edit_unputchar();  /* when line fits in 'columns' the '^' is at the start
+! 			  of the next line and will not be redrawn */
+  #ifdef FEAT_CMDL_INFO
+      clear_showcmd();
+  #endif
+--- 1570,1579 ----
+  #endif
+  
+      c = get_literal();
+!     if (did_putchar)
+! 	/* when the line fits in 'columns' the '^' is at the start of the next
+! 	 * line and will not removed by the redraw */
+! 	edit_unputchar();
+  #ifdef FEAT_CMDL_INFO
+      clear_showcmd();
+  #endif
+***************
+*** 9637,9642 ****
+--- 9643,9649 ----
+  {
+      int	    c;
+      int	    cc;
++     int	    did_putchar = FALSE;
+  
+      pc_status = PC_STATUS_UNSET;
+      if (redrawing() && !char_avail())
+***************
+*** 9645,9650 ****
+--- 9652,9658 ----
+  	ins_redraw(FALSE);
+  
+  	edit_putchar('?', TRUE);
++ 	did_putchar = TRUE;
+  #ifdef FEAT_CMDL_INFO
+  	add_to_showcmd_c(Ctrl_K);
+  #endif
+***************
+*** 9661,9668 ****
+      c = plain_vgetc();
+      --no_mapping;
+      --allow_keys;
+!     edit_unputchar();  /* when line fits in 'columns' the '?' is at the start
+! 			  of the next line and will not be redrawn */
+  
+      if (IS_SPECIAL(c) || mod_mask)	    /* special key */
+      {
+--- 9669,9678 ----
+      c = plain_vgetc();
+      --no_mapping;
+      --allow_keys;
+!     if (did_putchar)
+! 	/* when the line fits in 'columns' the '?' is at the start of the next
+! 	 * line and will not be removed by the redraw */
+! 	edit_unputchar();
+  
+      if (IS_SPECIAL(c) || mod_mask)	    /* special key */
+      {
+***************
+*** 9674,9679 ****
+--- 9684,9690 ----
+      }
+      if (c != ESC)
+      {
++ 	did_putchar = FALSE;
+  	if (redrawing() && !char_avail())
+  	{
+  	    /* may need to redraw when no more chars available now */
+***************
+*** 9681,9691 ****
+  
+  	    if (char2cells(c) == 1)
+  	    {
+- 		/* first remove the '?', otherwise it's restored when typing
+- 		 * an ESC next */
+- 		edit_unputchar();
+  		ins_redraw(FALSE);
+  		edit_putchar(c, TRUE);
+  	    }
+  #ifdef FEAT_CMDL_INFO
+  	    add_to_showcmd_c(c);
+--- 9692,9700 ----
+  
+  	    if (char2cells(c) == 1)
+  	    {
+  		ins_redraw(FALSE);
+  		edit_putchar(c, TRUE);
++ 		did_putchar = TRUE;
+  	    }
+  #ifdef FEAT_CMDL_INFO
+  	    add_to_showcmd_c(c);
+***************
+*** 9696,9703 ****
+  	cc = plain_vgetc();
+  	--no_mapping;
+  	--allow_keys;
+! 	edit_unputchar();  /* when line fits in 'columns' the '?' is at the
+! 			      start of the next line and will not be redrawn */
+  	if (cc != ESC)
+  	{
+  	    AppendToRedobuff((char_u *)CTRL_V_STR);
+--- 9705,9714 ----
+  	cc = plain_vgetc();
+  	--no_mapping;
+  	--allow_keys;
+! 	if (did_putchar)
+! 	    /* when the line fits in 'columns' the '?' is at the start of the
+! 	     * next line and will not be removed by a redraw */
+! 	    edit_unputchar();
+  	if (cc != ESC)
+  	{
+  	    AppendToRedobuff((char_u *)CTRL_V_STR);
+*** ../vim-7.3.180/src/version.c	2011-05-10 13:38:23.000000000 +0200
+--- src/version.c	2011-05-10 14:20:40.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     181,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+74. Your most erotic dreams are about cybersex
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.182 b/source/ap/vim/patches/7.3.182
new file mode 100644
index 00000000..509b68b5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.182
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.182
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.182 (after 7.3.180)
+Problem:    Compiler warning for uninitialized variable.
+Solution:   Add dummy initializer.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.181/src/misc1.c	2011-05-10 13:38:23.000000000 +0200
+--- src/misc1.c	2011-05-10 14:37:39.000000000 +0200
+***************
+*** 1563,1569 ****
+      char_u	*list;
+      int		middle_match_len = 0;
+      char_u	*prev_list;
+!     char_u	*saved_flags;
+  
+      i = 0;
+      while (vim_iswhite(line[i]))    /* leading white space is ignored */
+--- 1563,1569 ----
+      char_u	*list;
+      int		middle_match_len = 0;
+      char_u	*prev_list;
+!     char_u	*saved_flags = NULL;
+  
+      i = 0;
+      while (vim_iswhite(line[i]))    /* leading white space is ignored */
+*** ../vim-7.3.181/src/version.c	2011-05-10 14:22:10.000000000 +0200
+--- src/version.c	2011-05-10 14:38:39.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     182,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+75. You start wondering whether you could actually upgrade your brain
+    with a Pentium Pro microprocessor 80.  The upgrade works just fine.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.183 b/source/ap/vim/patches/7.3.183
new file mode 100644
index 00000000..23178c0b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.183
@@ -0,0 +1,87 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.183
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.183 (after 7.3.174)
+Problem:    When Exuberant ctags binary is exuberant-ctags it's not found.
+Solution:   Add configure check for exuberant-ctags.
+Files:	    src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.182/src/configure.in	2011-05-05 18:10:11.000000000 +0200
+--- src/configure.in	2011-05-10 15:39:38.000000000 +0200
+***************
+*** 3375,3384 ****
+  dnl -i+m to test for older Exuberant ctags
+  AC_MSG_CHECKING(how to create tags)
+  test -f tags && mv tags tags.save
+! if (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+!   TAGPRG="exctags -I INIT+ --fields=+S"
+! elif (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+    (eval etags	   /dev/null) < /dev/null 1>&AC_FD_CC 2>&1 && TAGPRG="etags"
+--- 3375,3386 ----
+  dnl -i+m to test for older Exuberant ctags
+  AC_MSG_CHECKING(how to create tags)
+  test -f tags && mv tags tags.save
+! if (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
++ elif (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
++   TAGPRG="exctags -I INIT+ --fields=+S"
++ elif (eval exuberant-ctags --version /dev/null | grep Exuberant) < /dev/null 1>&AC_FD_CC 2>&1; then
++   TAGPRG="exuberant-ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+    (eval etags	   /dev/null) < /dev/null 1>&AC_FD_CC 2>&1 && TAGPRG="etags"
+*** ../vim-7.3.182/src/auto/configure	2011-05-05 18:10:11.000000000 +0200
+--- src/auto/configure	2011-05-10 15:39:41.000000000 +0200
+***************
+*** 12028,12037 ****
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create tags" >&5
+  $as_echo_n "checking how to create tags... " >&6; }
+  test -f tags && mv tags tags.save
+! if (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+!   TAGPRG="exctags -I INIT+ --fields=+S"
+! elif (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+    (eval etags	   /dev/null) < /dev/null 1>&5 2>&1 && TAGPRG="etags"
+--- 12028,12039 ----
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create tags" >&5
+  $as_echo_n "checking how to create tags... " >&6; }
+  test -f tags && mv tags tags.save
+! if (eval ctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
+    TAGPRG="ctags -I INIT+ --fields=+S"
++ elif (eval exctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
++   TAGPRG="exctags -I INIT+ --fields=+S"
++ elif (eval exuberant-ctags --version /dev/null | grep Exuberant) < /dev/null 1>&5 2>&1; then
++   TAGPRG="exuberant-ctags -I INIT+ --fields=+S"
+  else
+    TAGPRG="ctags"
+    (eval etags	   /dev/null) < /dev/null 1>&5 2>&1 && TAGPRG="etags"
+*** ../vim-7.3.182/src/version.c	2011-05-10 14:44:07.000000000 +0200
+--- src/version.c	2011-05-10 15:40:48.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     183,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+78. You find yourself dialing IP numbers on the phone.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.184 b/source/ap/vim/patches/7.3.184
new file mode 100644
index 00000000..3b0cfc69
--- /dev/null
+++ b/source/ap/vim/patches/7.3.184
@@ -0,0 +1,86 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.184
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.184
+Problem:    Static code analysis errors in riscOS.
+Solution:   Make buffer size bigger. (Dominique Pelle)
+Files:	    src/gui_riscos.c
+
+
+*** ../vim-7.3.183/src/gui_riscos.c	2010-08-15 21:57:28.000000000 +0200
+--- src/gui_riscos.c	2011-05-10 15:49:56.000000000 +0200
+***************
+*** 1756,1762 ****
+  
+  	if (button & 0x444)
+  	{
+! 	    int	    front_block[10];
+  	    /* Dragging with Select - bring window to front first */
+  	    front_block[0] = gui.window_handle;
+  	    swi(Wimp_GetWindowState, 0, front_block);
+--- 1756,1762 ----
+  
+  	if (button & 0x444)
+  	{
+! 	    int	    front_block[64];
+  	    /* Dragging with Select - bring window to front first */
+  	    front_block[0] = gui.window_handle;
+  	    swi(Wimp_GetWindowState, 0, front_block);
+***************
+*** 1874,1880 ****
+  
+      if (ro_dragging == DRAG_RESIZE_WINDOW)
+      {
+! 	/* Resizeing the main window. */
+  	block[2] = y;
+  	block[3] = x;
+  	ro_open_main(block);
+--- 1874,1880 ----
+  
+      if (ro_dragging == DRAG_RESIZE_WINDOW)
+      {
+! 	/* Resizing the main window. */
+  	block[2] = y;
+  	block[3] = x;
+  	ro_open_main(block);
+***************
+*** 2651,2657 ****
+      long_u	length;
+  
+      block[0] = 48;			/* Size of block. */
+!     block[3] = 0;			/* Orinial message. */
+      block[4] = 0x10;			/* Data request. */
+      block[5] = gui.window_handle;
+      block[6] = RO_LOAD_CLIPBOARD;	/* Internal handle. */
+--- 2651,2657 ----
+      long_u	length;
+  
+      block[0] = 48;			/* Size of block. */
+!     block[3] = 0;			/* Original message. */
+      block[4] = 0x10;			/* Data request. */
+      block[5] = gui.window_handle;
+      block[6] = RO_LOAD_CLIPBOARD;	/* Internal handle. */
+*** ../vim-7.3.183/src/version.c	2011-05-10 15:41:59.000000000 +0200
+--- src/version.c	2011-05-10 15:51:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     184,
+  /**/
+
+-- 
+If bankers can count, how come they have eight windows and
+only four tellers?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.185 b/source/ap/vim/patches/7.3.185
new file mode 100644
index 00000000..7b3ed189
--- /dev/null
+++ b/source/ap/vim/patches/7.3.185
@@ -0,0 +1,77 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.185
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.185
+Problem:    ":windo g/pattern/q" closes windows and reports "N more lines".
+	    (Tim Chase)
+Solution:   Remember what buffer ":global" started in. (Jean-Rene David)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.184/src/ex_cmds.c	2011-04-11 21:35:03.000000000 +0200
+--- src/ex_cmds.c	2011-05-10 15:58:48.000000000 +0200
+***************
+*** 5365,5372 ****
+  global_exe(cmd)
+      char_u	*cmd;
+  {
+!     linenr_T	old_lcount;	/* b_ml.ml_line_count before the command */
+!     linenr_T	lnum;		/* line number according to old situation */
+  
+      /*
+       * Set current position only once for a global command.
+--- 5365,5373 ----
+  global_exe(cmd)
+      char_u	*cmd;
+  {
+!     linenr_T old_lcount;	/* b_ml.ml_line_count before the command */
+!     buf_T    *old_buf = curbuf;	/* remember what buffer we started in */
+!     linenr_T lnum;		/* line number according to old situation */
+  
+      /*
+       * Set current position only once for a global command.
+***************
+*** 5410,5417 ****
+  	msg_didout = FALSE;
+  
+      /* If substitutes done, report number of substitutes, otherwise report
+!      * number of extra or deleted lines. */
+!     if (!do_sub_msg(FALSE))
+  	msgmore(curbuf->b_ml.ml_line_count - old_lcount);
+  }
+  
+--- 5411,5420 ----
+  	msg_didout = FALSE;
+  
+      /* If substitutes done, report number of substitutes, otherwise report
+!      * number of extra or deleted lines.
+!      * Don't report extra or deleted lines in the edge case where the buffer
+!      * we are in after execution is different from the buffer we started in. */
+!     if (!do_sub_msg(FALSE) && curbuf == old_buf)
+  	msgmore(curbuf->b_ml.ml_line_count - old_lcount);
+  }
+  
+*** ../vim-7.3.184/src/version.c	2011-05-10 15:52:10.000000000 +0200
+--- src/version.c	2011-05-10 15:57:40.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     185,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+79. All of your most erotic dreams have a scrollbar at the right side.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.186 b/source/ap/vim/patches/7.3.186
new file mode 100644
index 00000000..d834c370
--- /dev/null
+++ b/source/ap/vim/patches/7.3.186
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.186
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.186
+Problem:    When 'clipboard' contains "unnamed" or "unnamedplus" the value of
+	    v:register is wrong for operators without a specific register.
+Solution:   Adjust the register according to 'clipboard'. (Ingo Karkat)
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.185/src/normal.c	2010-12-17 18:52:56.000000000 +0100
+--- src/normal.c	2011-05-10 16:07:49.000000000 +0200
+***************
+*** 1202,1208 ****
+      {
+  	clearop(oap);
+  #ifdef FEAT_EVAL
+! 	set_reg_var('"');
+  #endif
+      }
+  
+--- 1202,1214 ----
+      {
+  	clearop(oap);
+  #ifdef FEAT_EVAL
+! 	{
+! 	    int regname = 0;
+! 	    /* Adjust the register according to 'clipboard', so that when
+! 	     * "unnamed" is present it becomes '*' or '+' instead of '"'. */
+! 	    adjust_clip_reg(&regname);
+! 	    set_reg_var(regname);
+! 	}
+  #endif
+      }
+  
+*** ../vim-7.3.185/src/version.c	2011-05-10 16:00:43.000000000 +0200
+--- src/version.c	2011-05-10 16:10:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     186,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+80. At parties, you introduce your spouse as your "service provider."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.187 b/source/ap/vim/patches/7.3.187
new file mode 100644
index 00000000..7bf82ce4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.187
@@ -0,0 +1,6621 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.187
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.187
+Problem:    The RISC OS port has obvious errors and is not being maintained.
+Solution:   Remove the RISC OS files and code.
+Files:	    src/ascii.h, src/eval.c, src/ex_cmds.c, src/ex_cmds2.c,
+	    src/ex_docmd.c, src/fileio.c, src/globals.h, src/gui.c, src/gui.h,
+	    src/main.c, src/memfile.c, src/memline.c, src/misc1.c,
+	    src/proto.h, src/quickfix.c, src/search.c, src/structs.h,
+	    src/term.c, src/termlib.c, src/version.c, src/vim.h,
+	    src/gui_riscos.h, src/os_riscos.h, src/gui_riscos.c,
+	    src/os_riscos.c, runtime/doc/os_risc.txt
+
+
+*** ../vim-7.3.186/src/ascii.h	2010-08-15 21:57:25.000000000 +0200
+--- src/ascii.h	2011-05-10 16:22:08.000000000 +0200
+***************
+*** 183,193 ****
+  # define PATHSEP	psepc
+  # define PATHSEPSTR	pseps
+  #else
+! # ifdef RISCOS
+! #  define PATHSEP	'.'
+! #  define PATHSEPSTR	"."
+! # else
+! #  define PATHSEP	'/'
+! #  define PATHSEPSTR	"/"
+! # endif
+  #endif
+--- 183,188 ----
+  # define PATHSEP	psepc
+  # define PATHSEPSTR	pseps
+  #else
+! # define PATHSEP	'/'
+! # define PATHSEPSTR	"/"
+  #endif
+*** ../vim-7.3.186/src/eval.c	2011-04-21 14:27:21.000000000 +0200
+--- src/eval.c	2011-05-10 16:22:21.000000000 +0200
+***************
+*** 11818,11826 ****
+  #ifdef __QNX__
+  	"qnx",
+  #endif
+- #ifdef RISCOS
+- 	"riscos",
+- #endif
+  #ifdef UNIX
+  	"unix",
+  #endif
+--- 11818,11823 ----
+*** ../vim-7.3.186/src/ex_cmds.c	2011-05-10 16:00:43.000000000 +0200
+--- src/ex_cmds.c	2011-05-10 16:23:22.000000000 +0200
+***************
+*** 899,907 ****
+   * Handle the ":!cmd" command.	Also for ":r !cmd" and ":w !cmd"
+   * Bangs in the argument are replaced with the previously entered command.
+   * Remember the argument.
+-  *
+-  * RISCOS: Bangs only replaced when followed by a space, since many
+-  * pathnames contain one.
+   */
+      void
+  do_bang(addr_count, eap, forceit, do_in, do_out)
+--- 899,904 ----
+***************
+*** 980,990 ****
+  	trailarg = NULL;
+  	while (*p)
+  	{
+! 	    if (*p == '!'
+! #ifdef RISCOS
+! 			&& (p[1] == ' ' || p[1] == NUL)
+! #endif
+! 					)
+  	    {
+  		if (p > newcmd && p[-1] == '\\')
+  		    STRMOVE(p - 1, p);
+--- 977,983 ----
+  	trailarg = NULL;
+  	while (*p)
+  	{
+! 	    if (*p == '!')
+  	    {
+  		if (p > newcmd && p[-1] == '\\')
+  		    STRMOVE(p - 1, p);
+***************
+*** 1578,1591 ****
+  	    if (p != NULL)
+  		*p = NUL;
+  	}
+- # ifdef RISCOS
+- 	STRCAT(buf, " { < ");	/* Use RISC OS notation for input. */
+- 	STRCAT(buf, itmp);
+- 	STRCAT(buf, " } ");
+- # else
+  	STRCAT(buf, " <");	/* " < " causes problems on Amiga */
+  	STRCAT(buf, itmp);
+- # endif
+  	if (*p_shq == NUL)
+  	{
+  	    p = vim_strchr(cmd, '|');
+--- 1571,1578 ----
+***************
+*** 1634,1649 ****
+      else
+  	vim_snprintf((char *)end, (size_t)(buflen - (end - buf)),
+  #ifdef FEAT_QUICKFIX
+- # ifndef RISCOS
+- 		opt != p_sp ? " %s%s" :
+- # endif
+  		" %s %s",
+  #else
+- # ifndef RISCOS
+  		" %s%s",	/* " > %s" causes problems on Amiga */
+- # else
+- 		" %s %s",	/* But is needed for 'shellpipe' and RISC OS */
+- # endif
+  #endif
+  		(char *)opt, (char *)fname);
+  }
+--- 1621,1629 ----
+***************
+*** 1844,1854 ****
+  #ifdef VMS
+  				    (char_u *)"-tmp",
+  #else
+- # ifdef RISCOS
+- 				    (char_u *)"/tmp",
+- # else
+  				    (char_u *)".tmp",
+- # endif
+  #endif
+  				    FALSE);
+  	    if (tempname == NULL)		/* out of memory */
+--- 1824,1830 ----
+*** ../vim-7.3.186/src/ex_cmds2.c	2011-04-11 21:35:03.000000000 +0200
+--- src/ex_cmds2.c	2011-05-10 16:23:47.000000000 +0200
+***************
+*** 500,517 ****
+  	/* Expand the file name in the same way as do_source().  This means
+  	 * doing it twice, so that $DIR/file gets expanded when $DIR is
+  	 * "~/dir". */
+- #ifdef RISCOS
+- 	q = mch_munge_fname(p);
+- #else
+  	q = expand_env_save(p);
+- #endif
+  	if (q == NULL)
+  	    return FAIL;
+- #ifdef RISCOS
+- 	p = mch_munge_fname(q);
+- #else
+  	p = expand_env_save(q);
+- #endif
+  	vim_free(q);
+  	if (p == NULL)
+  	    return FAIL;
+--- 500,509 ----
+***************
+*** 2940,2950 ****
+      proftime_T		    wait_start;
+  #endif
+  
+- #ifdef RISCOS
+-     p = mch_munge_fname(fname);
+- #else
+      p = expand_env_save(fname);
+- #endif
+      if (p == NULL)
+  	return retval;
+      fname_exp = fix_fname(p);
+--- 2932,2938 ----
+*** ../vim-7.3.186/src/ex_docmd.c	2011-05-05 14:26:37.000000000 +0200
+--- src/ex_docmd.c	2011-05-10 16:24:18.000000000 +0200
+***************
+*** 9702,9715 ****
+  		    valid = 0;	    /* Must have ":p:h" to be valid */
+  		}
+  		else
+- #ifdef RISCOS
+- 		    /* Always use the full path for RISC OS if possible. */
+- 		    result = curbuf->b_ffname;
+- 		    if (result == NULL)
+- 			result = curbuf->b_fname;
+- #else
+  		    result = curbuf->b_fname;
+- #endif
+  		break;
+  
+  	case SPEC_HASH:		/* '#' or "#99": alternate file */
+--- 9702,9708 ----
+***************
+*** 9854,9864 ****
+  	if (src[*usedlen] == '<')	/* remove the file name extension */
+  	{
+  	    ++*usedlen;
+- #ifdef RISCOS
+- 	    if ((s = vim_strrchr(result, '/')) != NULL && s >= gettail(result))
+- #else
+  	    if ((s = vim_strrchr(result, '.')) != NULL && s >= gettail(result))
+- #endif
+  		resultlen = (int)(s - result);
+  	}
+  #ifdef FEAT_MODIFY_FNAME
+--- 9847,9853 ----
+***************
+*** 10875,10882 ****
+  	    else if (vim_ispathsep(*p))
+  	    {
+  		*s++ = '=';
+! #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA) || defined(RISCOS) \
+! 	|| defined(VMS)
+  		if (*p == ':')
+  		    *s++ = '-';
+  		else
+--- 10864,10870 ----
+  	    else if (vim_ispathsep(*p))
+  	    {
+  		*s++ = '=';
+! #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA) || defined(VMS)
+  		if (*p == ':')
+  		    *s++ = '-';
+  		else
+*** ../vim-7.3.186/src/fileio.c	2011-05-05 16:41:19.000000000 +0200
+--- src/fileio.c	2011-05-10 16:26:06.000000000 +0200
+***************
+*** 504,521 ****
+  
+      if (newfile && !read_stdin && !read_buffer)
+      {
+! 	/* Remember time of file.
+! 	 * For RISCOS, also remember the filetype.
+! 	 */
+  	if (mch_stat((char *)fname, &st) >= 0)
+  	{
+  	    buf_store_time(curbuf, &st, fname);
+  	    curbuf->b_mtime_read = curbuf->b_mtime;
+- 
+- #if defined(RISCOS) && defined(FEAT_OSFILETYPE)
+- 	    /* Read the filetype into the buffer local filetype option. */
+- 	    mch_read_filetype(fname);
+- #endif
+  #ifdef UNIX
+  	    /*
+  	     * Use the protection bits of the original file for the swap file.
+--- 504,514 ----
+  
+      if (newfile && !read_stdin && !read_buffer)
+      {
+! 	/* Remember time of file. */
+  	if (mch_stat((char *)fname, &st) >= 0)
+  	{
+  	    buf_store_time(curbuf, &st, fname);
+  	    curbuf->b_mtime_read = curbuf->b_mtime;
+  #ifdef UNIX
+  	    /*
+  	     * Use the protection bits of the original file for the swap file.
+***************
+*** 557,563 ****
+  
+  /*
+   * for UNIX: check readonly with perm and mch_access()
+-  * for RISCOS: same as Unix, otherwise file gets re-datestamped!
+   * for MSDOS and Amiga: check readonly by trying to open the file for writing
+   */
+      file_readonly = FALSE;
+--- 550,555 ----
+***************
+*** 3804,3816 ****
+  
+  	/* make sure we have a valid backup extension to use */
+  	if (*p_bex == NUL)
+- 	{
+- #ifdef RISCOS
+- 	    backup_ext = (char_u *)"/bak";
+- #else
+  	    backup_ext = (char_u *)".bak";
+- #endif
+- 	}
+  	else
+  	    backup_ext = p_bex;
+  
+--- 3796,3802 ----
+***************
+*** 4724,4734 ****
+  #endif
+      if (perm >= 0)		/* set perm. of new file same as old file */
+  	(void)mch_setperm(wfname, perm);
+- #ifdef RISCOS
+-     if (!append && !filtering)
+- 	/* Set the filetype after writing the file. */
+- 	mch_set_filetype(wfname, buf->b_p_oft);
+- #endif
+  #ifdef HAVE_ACL
+      /* Probably need to set the ACL before changing the user (can't set the
+       * ACL on a file the user doesn't own). */
+--- 4710,4715 ----
+***************
+*** 6262,6280 ****
+       */
+      for (ptr = retval + fnamelen; ptr > retval; mb_ptr_back(retval, ptr))
+      {
+- #ifndef RISCOS
+  	if (*ext == '.'
+! # ifdef USE_LONG_FNAME
+  		    && (!USE_LONG_FNAME || shortname)
+! # else
+! #  ifndef SHORT_FNAME
+  		    && shortname
+- #  endif
+  # endif
+  								)
+  	    if (*ptr == '.')	/* replace '.' by '_' */
+  		*ptr = '_';
+- #endif
+  	if (vim_ispathsep(*ptr))
+  	{
+  	    ++ptr;
+--- 6243,6259 ----
+       */
+      for (ptr = retval + fnamelen; ptr > retval; mb_ptr_back(retval, ptr))
+      {
+  	if (*ext == '.'
+! #ifdef USE_LONG_FNAME
+  		    && (!USE_LONG_FNAME || shortname)
+! #else
+! # ifndef SHORT_FNAME
+  		    && shortname
+  # endif
++ #endif
+  								)
+  	    if (*ptr == '.')	/* replace '.' by '_' */
+  		*ptr = '_';
+  	if (vim_ispathsep(*ptr))
+  	{
+  	    ++ptr;
+***************
+*** 6309,6331 ****
+  	if (fname == NULL || *fname == NUL
+  				   || vim_ispathsep(fname[STRLEN(fname) - 1]))
+  	{
+- #ifdef RISCOS
+- 	    if (*ext == '/')
+- #else
+  	    if (*ext == '.')
+- #endif
+  		*s++ = '_';
+  	}
+  	/*
+  	 * If the extension starts with '.', truncate the base name at 8
+  	 * characters
+  	 */
+- #ifdef RISCOS
+- 	/* We normally use '/', but swap files are '_' */
+- 	else if (*ext == '/' || *ext == '_')
+- #else
+  	else if (*ext == '.')
+- #endif
+  	{
+  	    if ((size_t)(s - ptr) > (size_t)8)
+  	    {
+--- 6288,6301 ----
+***************
+*** 6337,6349 ****
+  	 * If the extension doesn't start with '.', and the file name
+  	 * doesn't have an extension yet, append a '.'
+  	 */
+- #ifdef RISCOS
+- 	else if ((e = vim_strchr(ptr, '/')) == NULL)
+- 	    *s++ = '/';
+- #else
+  	else if ((e = vim_strchr(ptr, '.')) == NULL)
+  	    *s++ = '.';
+- #endif
+  	/*
+  	 * If the extension doesn't start with '.', and there already is an
+  	 * extension, it may need to be truncated
+--- 6307,6314 ----
+***************
+*** 6371,6393 ****
+      /*
+       * Prepend the dot.
+       */
+!     if (prepend_dot && !shortname && *(e = gettail(retval)) !=
+! #ifdef RISCOS
+! 	    '/'
+! #else
+! 	    '.'
+! #endif
+  #ifdef USE_LONG_FNAME
+  	    && USE_LONG_FNAME
+  #endif
+  				)
+      {
+  	STRMOVE(e + 1, e);
+- #ifdef RISCOS
+- 	*e = '/';
+- #else
+  	*e = '.';
+- #endif
+      }
+  #endif
+  
+--- 6336,6349 ----
+      /*
+       * Prepend the dot.
+       */
+!     if (prepend_dot && !shortname && *(e = gettail(retval)) != '.'
+  #ifdef USE_LONG_FNAME
+  	    && USE_LONG_FNAME
+  #endif
+  				)
+      {
+  	STRMOVE(e + 1, e);
+  	*e = '.';
+      }
+  #endif
+  
+***************
+*** 10205,10223 ****
+  		    ++p;
+  		break;
+  	    case '.':
+- #ifdef RISCOS
+- 		if (allow_dirs != NULL)
+- 		     *allow_dirs = TRUE;
+- 		/* FALLTHROUGH */
+- #endif
+  	    case '~':
+  		reg_pat[i++] = '\\';
+  		reg_pat[i++] = *p;
+  		break;
+  	    case '?':
+- #ifdef RISCOS
+- 	    case '#':
+- #endif
+  		reg_pat[i++] = '.';
+  		break;
+  	    case '\\':
+--- 10161,10171 ----
+*** ../vim-7.3.186/src/globals.h	2011-05-05 14:26:37.000000000 +0200
+--- src/globals.h	2011-05-10 16:26:13.000000000 +0200
+***************
+*** 1513,1519 ****
+  EXTERN char_u e_sandbox[]	INIT(= N_("E48: Not allowed in sandbox"));
+  #endif
+  EXTERN char_u e_secure[]	INIT(= N_("E523: Not allowed here"));
+! #if defined(AMIGA) || defined(MACOS) || defined(MSWIN) || defined(RISCOS) \
+  	|| defined(UNIX) || defined(VMS) || defined(OS2)
+  EXTERN char_u e_screenmode[]	INIT(= N_("E359: Screen mode setting not supported"));
+  #endif
+--- 1513,1519 ----
+  EXTERN char_u e_sandbox[]	INIT(= N_("E48: Not allowed in sandbox"));
+  #endif
+  EXTERN char_u e_secure[]	INIT(= N_("E523: Not allowed here"));
+! #if defined(AMIGA) || defined(MACOS) || defined(MSWIN)  \
+  	|| defined(UNIX) || defined(VMS) || defined(OS2)
+  EXTERN char_u e_screenmode[]	INIT(= N_("E359: Screen mode setting not supported"));
+  #endif
+*** ../vim-7.3.186/src/gui.c	2011-01-17 20:08:03.000000000 +0100
+--- src/gui.c	2011-05-10 16:26:53.000000000 +0200
+***************
+*** 2156,2162 ****
+  
+      if (highlight_mask & (HL_INVERSE | HL_STANDOUT))
+      {
+! #if defined(AMIGA) || defined(RISCOS)
+  	gui_mch_set_colors(bg_color, fg_color);
+  #else
+  	gui_mch_set_fg_color(bg_color);
+--- 2156,2162 ----
+  
+      if (highlight_mask & (HL_INVERSE | HL_STANDOUT))
+      {
+! #if defined(AMIGA)
+  	gui_mch_set_colors(bg_color, fg_color);
+  #else
+  	gui_mch_set_fg_color(bg_color);
+***************
+*** 2165,2171 ****
+      }
+      else
+      {
+! #if defined(AMIGA) || defined(RISCOS)
+  	gui_mch_set_colors(fg_color, bg_color);
+  #else
+  	gui_mch_set_fg_color(fg_color);
+--- 2165,2171 ----
+      }
+      else
+      {
+! #if defined(AMIGA)
+  	gui_mch_set_colors(fg_color, bg_color);
+  #else
+  	gui_mch_set_fg_color(fg_color);
+***************
+*** 2193,2199 ****
+      if (back != 0 && ((draw_flags & DRAW_BOLD) || (highlight_mask & HL_ITALIC)))
+  	return FAIL;
+  
+! #if defined(RISCOS) || defined(FEAT_GUI_GTK)
+      /* If there's no italic font, then fake it.
+       * For GTK2, we don't need a different font for italic style. */
+      if (hl_mask_todo & HL_ITALIC)
+--- 2193,2199 ----
+      if (back != 0 && ((draw_flags & DRAW_BOLD) || (highlight_mask & HL_ITALIC)))
+  	return FAIL;
+  
+! #if defined(FEAT_GUI_GTK)
+      /* If there's no italic font, then fake it.
+       * For GTK2, we don't need a different font for italic style. */
+      if (hl_mask_todo & HL_ITALIC)
+***************
+*** 2985,3010 ****
+  	    did_clip = TRUE;
+  	}
+  	/* Allow the left button to start the selection */
+- 	else if (button ==
+- # ifdef RISCOS
+- 		/* Only start a drag on a drag event. Otherwise
+- 		 * we don't get a release event. */
+- 		    MOUSE_DRAG
+- # else
+- 		    MOUSE_LEFT
+- # endif
+- 				)
+- 	{
+- 	    clip_start_selection(X_2_COL(x), Y_2_ROW(y), repeated_click);
+- 	    did_clip = TRUE;
+- 	}
+- # ifdef RISCOS
+  	else if (button == MOUSE_LEFT)
+  	{
+! 	    clip_clear_selection();
+  	    did_clip = TRUE;
+  	}
+- # endif
+  
+  	/* Always allow pasting */
+  	if (button != MOUSE_MIDDLE)
+--- 2985,2995 ----
+  	    did_clip = TRUE;
+  	}
+  	/* Allow the left button to start the selection */
+  	else if (button == MOUSE_LEFT)
+  	{
+! 	    clip_start_selection(X_2_COL(x), Y_2_ROW(y), repeated_click);
+  	    did_clip = TRUE;
+  	}
+  
+  	/* Always allow pasting */
+  	if (button != MOUSE_MIDDLE)
+*** ../vim-7.3.186/src/gui.h	2010-08-15 21:57:25.000000000 +0200
+--- src/gui.h	2011-05-10 16:27:19.000000000 +0200
+***************
+*** 52,61 ****
+  # include <SegLoad.h>*/
+  #endif
+  
+- #ifdef RISCOS
+- # include "gui_riscos.h"
+- #endif
+- 
+  #ifdef FEAT_GUI_PHOTON
+  # include <Ph.h>
+  # include <Pt.h>
+--- 52,57 ----
+***************
+*** 151,157 ****
+  #define DRAW_BOLD		0x02	/* draw bold text */
+  #define DRAW_UNDERL		0x04	/* draw underline text */
+  #define DRAW_UNDERC		0x08	/* draw undercurl text */
+! #if defined(RISCOS) || defined(FEAT_GUI_GTK)
+  # define DRAW_ITALIC		0x10	/* draw italic text */
+  #endif
+  #define DRAW_CURSOR		0x20	/* drawing block cursor (win32) */
+--- 147,153 ----
+  #define DRAW_BOLD		0x02	/* draw bold text */
+  #define DRAW_UNDERL		0x04	/* draw underline text */
+  #define DRAW_UNDERC		0x08	/* draw undercurl text */
+! #if defined(FEAT_GUI_GTK)
+  # define DRAW_ITALIC		0x10	/* draw italic text */
+  #endif
+  #define DRAW_CURSOR		0x20	/* drawing block cursor (win32) */
+***************
+*** 219,227 ****
+  #ifdef FEAT_GUI_MAC
+      ControlHandle id;		/* A handle to the scrollbar */
+  #endif
+- #ifdef RISCOS
+-     int		id;		/* Window handle of scrollbar window */
+- #endif
+  #ifdef FEAT_GUI_PHOTON
+      PtWidget_t	*id;
+  #endif
+--- 215,220 ----
+***************
+*** 450,463 ****
+      int		visibility;	    /* Is window partially/fully obscured? */
+  #endif
+  
+- #ifdef RISCOS
+-     int		window_handle;
+-     char_u	*window_title;
+-     int		window_title_size;
+-     int		fg_colour;		/* in 0xBBGGRR format */
+-     int		bg_colour;
+- #endif
+- 
+  #ifdef FEAT_GUI_PHOTON
+      PtWidget_t	*vimWindow;		/* PtWindow */
+      PtWidget_t	*vimTextArea;		/* PtRaw */
+--- 443,448 ----
+*** ../vim-7.3.186/src/main.c	2011-04-11 21:35:03.000000000 +0200
+--- src/main.c	2011-05-10 16:27:33.000000000 +0200
+***************
+*** 3276,3286 ****
+      main_msg(_("+reverse\t\tDon't use reverse video (also: +rv)"));
+      main_msg(_("-xrm <resource>\tSet the specified resource"));
+  #endif /* FEAT_GUI_X11 */
+- #if defined(FEAT_GUI) && defined(RISCOS)
+-     mch_msg(_("\nArguments recognised by gvim (RISC OS version):\n"));
+-     main_msg(_("--columns <number>\tInitial width of window in columns"));
+-     main_msg(_("--rows <number>\tInitial height of window in rows"));
+- #endif
+  #ifdef FEAT_GUI_GTK
+      mch_msg(_("\nArguments recognised by gvim (GTK+ version):\n"));
+      main_msg(_("-font <font>\t\tUse <font> for normal text (also: -fn)"));
+--- 3276,3281 ----
+*** ../vim-7.3.186/src/memfile.c	2011-03-22 18:10:34.000000000 +0100
+--- src/memfile.c	2011-05-10 16:27:38.000000000 +0200
+***************
+*** 1307,1313 ****
+       * fname cannot be NameBuff, because it must have been allocated.
+       */
+      mf_set_ffname(mfp);
+! #if defined(MSDOS) || defined(MSWIN) || defined(RISCOS)
+      /*
+       * A ":!cd e:xxx" may change the directory without us knowning, use the
+       * full pathname always.  Careful: This frees fname!
+--- 1307,1313 ----
+       * fname cannot be NameBuff, because it must have been allocated.
+       */
+      mf_set_ffname(mfp);
+! #if defined(MSDOS) || defined(MSWIN)
+      /*
+       * A ":!cd e:xxx" may change the directory without us knowning, use the
+       * full pathname always.  Careful: This frees fname!
+*** ../vim-7.3.186/src/memline.c	2011-02-15 11:56:56.000000000 +0100
+--- src/memline.c	2011-05-10 16:28:40.000000000 +0200
+***************
+*** 748,754 ****
+  	    continue;
+  	if (mf_open_file(mfp, fname) == OK)	/* consumes fname! */
+  	{
+! #if defined(MSDOS) || defined(MSWIN) || defined(RISCOS)
+  	    /*
+  	     * set full pathname for swap file now, because a ":!cd dir" may
+  	     * change directory without us knowing it.
+--- 748,754 ----
+  	    continue;
+  	if (mf_open_file(mfp, fname) == OK)	/* consumes fname! */
+  	{
+! #if defined(MSDOS) || defined(MSWIN)
+  	    /*
+  	     * set full pathname for swap file now, because a ":!cd dir" may
+  	     * change directory without us knowing it.
+***************
+*** 933,939 ****
+  	b0p->b0_fname[0] = NUL;
+      else
+      {
+! #if defined(MSDOS) || defined(MSWIN) || defined(AMIGA) || defined(RISCOS)
+  	/* Systems that cannot translate "~user" back into a path: copy the
+  	 * file name unmodified.  Do use slashes instead of backslashes for
+  	 * portability. */
+--- 933,939 ----
+  	b0p->b0_fname[0] = NUL;
+      else
+      {
+! #if defined(MSDOS) || defined(MSWIN) || defined(AMIGA)
+  	/* Systems that cannot translate "~user" back into a path: copy the
+  	 * file name unmodified.  Do use slashes instead of backslashes for
+  	 * portability. */
+***************
+*** 1103,1109 ****
+  	fname = (char_u *)"";
+      len = (int)STRLEN(fname);
+      if (len >= 4 &&
+! #if defined(VMS) || defined(RISCOS)
+  	    STRNICMP(fname + len - 4, "_s" , 2)
+  #else
+  	    STRNICMP(fname + len - 4, ".s" , 2)
+--- 1103,1109 ----
+  	fname = (char_u *)"";
+      len = (int)STRLEN(fname);
+      if (len >= 4 &&
+! #if defined(VMS)
+  	    STRNICMP(fname + len - 4, "_s" , 2)
+  #else
+  	    STRNICMP(fname + len - 4, ".s" , 2)
+***************
+*** 1773,1783 ****
+  #ifdef VMS
+  		names[0] = vim_strsave((char_u *)"*_sw%");
+  #else
+- # ifdef RISCOS
+- 		names[0] = vim_strsave((char_u *)"*_sw#");
+- # else
+  		names[0] = vim_strsave((char_u *)"*.sw?");
+- # endif
+  #endif
+  #if defined(UNIX) || defined(WIN3264)
+  		/* For Unix names starting with a dot are special.  MS-Windows
+--- 1773,1779 ----
+***************
+*** 1804,1814 ****
+  #ifdef VMS
+  		names[0] = concat_fnames(dir_name, (char_u *)"*_sw%", TRUE);
+  #else
+- # ifdef RISCOS
+- 		names[0] = concat_fnames(dir_name, (char_u *)"*_sw#", TRUE);
+- # else
+  		names[0] = concat_fnames(dir_name, (char_u *)"*.sw?", TRUE);
+- # endif
+  #endif
+  #if defined(UNIX) || defined(WIN3264)
+  		/* For Unix names starting with a dot are special.  MS-Windows
+--- 1800,1806 ----
+***************
+*** 1877,1883 ****
+  	    char_u	    *swapname;
+  
+  	    swapname = modname(fname_res,
+! #if defined(VMS) || defined(RISCOS)
+  			       (char_u *)"_swp", FALSE
+  #else
+  			       (char_u *)".swp", TRUE
+--- 1869,1875 ----
+  	    char_u	    *swapname;
+  
+  	    swapname = modname(fname_res,
+! #if defined(VMS)
+  			       (char_u *)"_swp", FALSE
+  #else
+  			       (char_u *)".swp", TRUE
+***************
+*** 2176,2186 ****
+  #ifdef VMS
+      names[num_names] = concat_fnames(path, (char_u *)"_sw%", FALSE);
+  #else
+- # ifdef RISCOS
+-     names[num_names] = concat_fnames(path, (char_u *)"_sw#", FALSE);
+- # else
+      names[num_names] = concat_fnames(path, (char_u *)".sw?", FALSE);
+- # endif
+  #endif
+      if (names[num_names] == NULL)
+  	goto end;
+--- 2168,2174 ----
+***************
+*** 2207,2217 ****
+  #ifdef VMS
+      names[num_names] = modname(path, (char_u *)"_sw%", FALSE);
+  #else
+- # ifdef RISCOS
+-     names[num_names] = modname(path, (char_u *)"_sw#", FALSE);
+- # else
+      names[num_names] = modname(path, (char_u *)".sw?", FALSE);
+- # endif
+  #endif
+      if (names[num_names] == NULL)
+  	goto end;
+--- 2195,2201 ----
+***************
+*** 3205,3211 ****
+  	mf_free(mfp, hp);	/* free the data block */
+  	buf->b_ml.ml_locked = NULL;
+  
+! 	for (stack_idx = buf->b_ml.ml_stack_top - 1; stack_idx >= 0; --stack_idx)
+  	{
+  	    buf->b_ml.ml_stack_top = 0;	    /* stack is invalid when failing */
+  	    ip = &(buf->b_ml.ml_stack[stack_idx]);
+--- 3189,3196 ----
+  	mf_free(mfp, hp);	/* free the data block */
+  	buf->b_ml.ml_locked = NULL;
+  
+! 	for (stack_idx = buf->b_ml.ml_stack_top - 1; stack_idx >= 0;
+! 								  --stack_idx)
+  	{
+  	    buf->b_ml.ml_stack_top = 0;	    /* stack is invalid when failing */
+  	    ip = &(buf->b_ml.ml_stack[stack_idx]);
+***************
+*** 3956,3969 ****
+  #else
+  	    (buf->b_p_sn || buf->b_shortname),
+  #endif
+- #ifdef RISCOS
+- 	    /* Avoid problems if fname has special chars, eg <Wimp$Scrap> */
+- 	    ffname,
+- #else
+  	    fname_res,
+- #endif
+  	    (char_u *)
+! #if defined(VMS) || defined(RISCOS)
+  	    "_swp",
+  #else
+  	    ".swp",
+--- 3941,3949 ----
+  #else
+  	    (buf->b_p_sn || buf->b_shortname),
+  #endif
+  	    fname_res,
+  	    (char_u *)
+! #if defined(VMS)
+  	    "_swp",
+  #else
+  	    ".swp",
+***************
+*** 4427,4440 ****
+  		    }
+  		    close(fd);
+  		}
+- #ifdef RISCOS
+- 		else
+- 		    /* Can't open swap file, though it does exist.
+- 		     * Assume that the user is editing two files with
+- 		     * the same name in different directories. No error.
+- 		     */
+- 		    differ = TRUE;
+- #endif
+  
+  		/* give the ATTENTION message when there is an old swap file
+  		 * for the current file, and the buffer was not recovered. */
+--- 4407,4412 ----
+*** ../vim-7.3.186/src/misc1.c	2011-05-10 14:44:07.000000000 +0200
+--- src/misc1.c	2011-05-10 16:29:29.000000000 +0200
+***************
+*** 4589,4613 ****
+  vim_ispathsep(c)
+      int c;
+  {
+! #ifdef RISCOS
+!     return (c == '.' || c == ':');
+! #else
+! # ifdef UNIX
+      return (c == '/');	    /* UNIX has ':' inside file names */
+! # else
+! #  ifdef BACKSLASH_IN_FILENAME
+      return (c == ':' || c == '/' || c == '\\');
+! #  else
+! #   ifdef VMS
+      /* server"user passwd"::device:[full.path.name]fname.extension;version" */
+      return (c == ':' || c == '[' || c == ']' || c == '/'
+  	    || c == '<' || c == '>' || c == '"' );
+! #   else		/* Amiga */
+      return (c == ':' || c == '/');
+! #   endif /* VMS */
+! #  endif
+  # endif
+! #endif /* RISC OS */
+  }
+  
+  #if defined(FEAT_SEARCHPATH) || defined(PROTO)
+--- 4589,4609 ----
+  vim_ispathsep(c)
+      int c;
+  {
+! #ifdef UNIX
+      return (c == '/');	    /* UNIX has ':' inside file names */
+! #else
+! # ifdef BACKSLASH_IN_FILENAME
+      return (c == ':' || c == '/' || c == '\\');
+! # else
+! #  ifdef VMS
+      /* server"user passwd"::device:[full.path.name]fname.extension;version" */
+      return (c == ':' || c == '[' || c == ']' || c == '/'
+  	    || c == '<' || c == '>' || c == '"' );
+! #  else
+      return (c == ':' || c == '/');
+! #  endif /* VMS */
+  # endif
+! #endif
+  }
+  
+  #if defined(FEAT_SEARCHPATH) || defined(PROTO)
+*** ../vim-7.3.186/src/proto.h	2010-08-15 21:57:29.000000000 +0200
+--- src/proto.h	2011-05-10 16:29:45.000000000 +0200
+***************
+*** 62,70 ****
+  # ifdef __BEOS__
+  #  include "os_beos.pro"
+  # endif
+- # ifdef RISCOS
+- #  include "os_riscos.pro"
+- # endif
+  # ifdef __QNX__
+  #  include "os_qnx.pro"
+  # endif
+--- 62,67 ----
+***************
+*** 245,253 ****
+  #  ifdef FEAT_GUI_X11
+  #   include "gui_x11.pro"
+  #  endif
+- #  ifdef RISCOS
+- #   include "gui_riscos.pro"
+- #  endif
+  #  ifdef FEAT_GUI_PHOTON
+  #   include "gui_photon.pro"
+  #  endif
+--- 242,247 ----
+*** ../vim-7.3.186/src/quickfix.c	2011-05-05 17:14:07.000000000 +0200
+--- src/quickfix.c	2011-05-10 16:30:18.000000000 +0200
+***************
+*** 1182,1202 ****
+      if (fname == NULL || *fname == NUL)		/* no file name */
+  	return 0;
+      {
+- #ifdef RISCOS
+- 	/* Name is reported as `main.c', but file is `c.main' */
+- 	return ro_buflist_add(fname);
+- #else
+  	char_u	    *ptr;
+  	int	    fnum;
+  
+! # ifdef VMS
+  	vms_remove_version(fname);
+! # endif
+! # ifdef BACKSLASH_IN_FILENAME
+  	if (directory != NULL)
+  	    slash_adjust(directory);
+  	slash_adjust(fname);
+! # endif
+  	if (directory != NULL && !vim_isAbsName(fname)
+  		&& (ptr = concat_fnames(directory, fname, TRUE)) != NULL)
+  	{
+--- 1182,1198 ----
+      if (fname == NULL || *fname == NUL)		/* no file name */
+  	return 0;
+      {
+  	char_u	    *ptr;
+  	int	    fnum;
+  
+! #ifdef VMS
+  	vms_remove_version(fname);
+! #endif
+! #ifdef BACKSLASH_IN_FILENAME
+  	if (directory != NULL)
+  	    slash_adjust(directory);
+  	slash_adjust(fname);
+! #endif
+  	if (directory != NULL && !vim_isAbsName(fname)
+  		&& (ptr = concat_fnames(directory, fname, TRUE)) != NULL)
+  	{
+***************
+*** 1221,1227 ****
+  	    return fnum;
+  	}
+  	return buflist_add(fname, 0);
+- #endif
+      }
+  }
+  
+--- 1217,1222 ----
+*** ../vim-7.3.186/src/search.c	2011-02-25 18:38:29.000000000 +0100
+--- src/search.c	2011-05-10 16:30:38.000000000 +0200
+***************
+*** 4581,4589 ****
+      char_u	*already = NULL;
+      char_u	*startp = NULL;
+      char_u	*inc_opt = NULL;
+- #ifdef RISCOS
+-     int		previous_munging = __riscosify_control;
+- #endif
+  #if defined(FEAT_WINDOWS) && defined(FEAT_QUICKFIX)
+      win_T	*curwin_save = NULL;
+  #endif
+--- 4581,4586 ----
+***************
+*** 4596,4606 ****
+      if (file_line == NULL)
+  	return;
+  
+- #ifdef RISCOS
+-     /* UnixLib knows best how to munge c file names - turn munging back on. */
+-     int __riscosify_control = 0;
+- #endif
+- 
+      if (type != CHECK_PATH && type != FIND_DEFINE
+  #ifdef FEAT_INS_EXPAND
+  	/* when CONT_SOL is set compare "ptr" with the beginning of the line
+--- 4593,4598 ----
+***************
+*** 5228,5238 ****
+      vim_free(regmatch.regprog);
+      vim_free(incl_regmatch.regprog);
+      vim_free(def_regmatch.regprog);
+- 
+- #ifdef RISCOS
+-    /* Restore previous file munging state. */
+-     __riscosify_control = previous_munging;
+- #endif
+  }
+  
+      static void
+--- 5220,5225 ----
+*** ../vim-7.3.186/src/structs.h	2011-03-22 18:10:34.000000000 +0100
+--- src/structs.h	2011-05-10 16:30:49.000000000 +0200
+***************
+*** 2366,2376 ****
+      MenuHandle	menu_handle;
+      MenuHandle	submenu_handle;
+  #endif
+- #ifdef RISCOS
+-     int		*id;		    /* Not used, but gui.c needs it */
+-     int		greyed_out;	    /* Flag */
+-     int		hidden;
+- #endif
+  #ifdef FEAT_GUI_PHOTON
+      PtWidget_t	*id;
+      PtWidget_t	*submenu_id;
+--- 2366,2371 ----
+*** ../vim-7.3.186/src/term.c	2010-12-30 14:47:32.000000000 +0100
+--- src/term.c	2011-05-10 16:31:41.000000000 +0200
+***************
+*** 52,58 ****
+  
+  /*
+   * Here are the builtin termcap entries.  They are not stored as complete
+!  * Tcarr structures, as such a structure is too big.
+   *
+   * The entries are compact, therefore they normally are included even when
+   * HAVE_TGETENT is defined. When HAVE_TGETENT is defined, the builtin entries
+--- 52,58 ----
+  
+  /*
+   * Here are the builtin termcap entries.  They are not stored as complete
+!  * structures with all entries, as such a structure is too big.
+   *
+   * The entries are compact, therefore they normally are included even when
+   * HAVE_TGETENT is defined. When HAVE_TGETENT is defined, the builtin entries
+***************
+*** 199,269 ****
+  #endif
+  
+  #ifndef NO_BUILTIN_TCAPS
+- # if defined(RISCOS) || defined(ALL_BUILTIN_TCAPS)
+- /*
+-  * Default for the Acorn.
+-  */
+-     {(int)KS_NAME,	"riscos"},
+-     {(int)KS_CL,	"\014"},		/* Cls and Home Cursor */
+-     {(int)KS_CM,	"\001%d\001%d\002"},	/* Position cursor */
+- 
+-     {(int)KS_CCO,	"16"},			/* Allow 16 colors */
+- 
+-     {(int)KS_CAF,	"\001%d\021"},		/* Set foreground colour */
+-     {(int)KS_CAB,	"\001%d\022"},		/* Set background colour */
+- 
+- 
+-     {(int)KS_ME,	"\004"},		/* Normal mode */
+-     {(int)KS_MR,	"\005"},		/* Reverse */
+- 
+-     {(int)KS_VI,	"\016"},		/* Cursor invisible */
+-     {(int)KS_VE,	"\017"},		/* Cursor visible */
+-     {(int)KS_VS,	"\020"},		/* Cursor very visible */
+- 
+-     {(int)KS_CS,	"\001%d\001%d\003"},	/* Set scroll region */
+-     {(int)KS_SR,	"\023"},		/* Scroll text down */
+-     {K_UP,		"\217"},
+-     {K_DOWN,		"\216"},
+-     {K_LEFT,		"\214"},
+-     {K_RIGHT,		"\215"},
+-     {K_S_UP,		"\237"},
+-     {K_S_DOWN,		"\236"},
+-     {K_S_LEFT,		"\234"},
+-     {K_S_RIGHT,		"\235"},
+- 
+-     {K_F1,		"\201"},
+-     {K_F2,		"\202"},
+-     {K_F3,		"\203"},
+-     {K_F4,		"\204"},
+-     {K_F5,		"\205"},
+-     {K_F6,		"\206"},
+-     {K_F7,		"\207"},
+-     {K_F8,		"\210"},
+-     {K_F9,		"\211"},
+-     {K_F10,		"\312"},
+-     {K_F11,		"\313"},
+-     {K_F12,		"\314"},
+-     {K_S_F1,		"\221"},
+-     {K_S_F2,		"\222"},
+-     {K_S_F3,		"\223"},
+-     {K_S_F4,		"\224"},
+-     {K_S_F5,		"\225"},
+-     {K_S_F6,		"\226"},
+-     {K_S_F7,		"\227"},
+-     {K_S_F8,		"\230"},
+-     {K_S_F9,		"\231"},
+-     {K_S_F10,		"\332"},
+-     {K_S_F11,		"\333"},
+-     {K_S_F12,		"\334"},
+-     {K_BS,		"\010"},
+-     {K_INS,		"\315"},
+-     {K_DEL,		"\177"},
+-     {K_HOME,		"\036"},
+-     {K_END,		"\213"},
+-     {K_PAGEUP,		"\237"},
+-     {K_PAGEDOWN,	"\236"},
+- # endif	/* Acorn terminal */
+- 
+  
+  # if defined(AMIGA) || defined(ALL_BUILTIN_TCAPS)
+  /*
+--- 199,204 ----
+***************
+*** 1399,1408 ****
+  /*
+   * DEFAULT_TERM is used, when no terminal is specified with -T option or $TERM.
+   */
+- #ifdef RISCOS
+- # define DEFAULT_TERM	(char_u *)"riscos"
+- #endif
+- 
+  #ifdef AMIGA
+  # define DEFAULT_TERM	(char_u *)"amiga"
+  #endif
+--- 1334,1339 ----
+*** ../vim-7.3.186/src/termlib.c	2010-08-15 21:57:30.000000000 +0200
+--- src/termlib.c	2011-05-10 16:31:58.000000000 +0200
+***************
+*** 13,19 ****
+  #include "vim.h"
+  #include "termlib.pro"
+  
+! #if !defined(AMIGA) && !defined(VMS) && !defined(MACOS) && !defined(RISCOS)
+  # include <sgtty.h>
+  #endif
+  
+--- 13,19 ----
+  #include "vim.h"
+  #include "termlib.pro"
+  
+! #if !defined(AMIGA) && !defined(VMS) && !defined(MACOS)
+  # include <sgtty.h>
+  #endif
+  
+*** ../vim-7.3.186/src/version.c	2011-05-10 16:12:40.000000000 +0200
+--- src/version.c	2011-05-10 16:37:20.000000000 +0200
+***************
+*** 1205,1213 ****
+  # endif
+  #endif
+  
+- #ifdef RISCOS
+-     MSG_PUTS(_("\nRISC OS version"));
+- #endif
+  #ifdef VMS
+      MSG_PUTS(_("\nOpenVMS version"));
+  # ifdef HAVE_PATHDEF
+--- 1207,1212 ----
+*** ../vim-7.3.186/src/vim.h	2011-05-05 16:41:19.000000000 +0200
+--- src/vim.h	2011-05-10 16:32:40.000000000 +0200
+***************
+*** 184,192 ****
+  #  define SIZEOF_INT 2
+  # endif
+  #endif
+- #ifdef RISCOS
+- # define SIZEOF_INT 4
+- #endif
+  
+  
+  #include "feature.h"	/* #defines for optionals and features */
+--- 184,189 ----
+***************
+*** 340,349 ****
+  # include "os_mac.h"
+  #endif
+  
+- #ifdef RISCOS
+- # include "os_riscos.h"
+- #endif
+- 
+  #ifdef __QNX__
+  # include "os_qnx.h"
+  #endif
+--- 337,342 ----
+*** ../vim-7.3.186/src/gui_riscos.h	2010-08-15 21:57:28.000000000 +0200
+--- src/gui_riscos.h	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,32 ****
+- /* vi:set ts=8 sts=4 sw=4:
+-  *
+-  * VIM - Vi IMproved	by Bram Moolenaar
+-  *
+-  * Do ":help uganda"  in Vim to read copying and usage conditions.
+-  * Do ":help credits" in Vim to see a list of people who contributed.
+-  */
+- 
+- #define FEAT_BROWSE
+- 
+- #define TASK 0x4b534154
+- 
+- /* Nested wimp flags: */
+- #define CHILD_FIX_TO_WORKAREA	0
+- #define CHILD_FIX_TO_LEFT	1
+- #define CHILD_FIX_TO_BOTTOM	1
+- #define CHILD_FIX_TO_RIGHT	2
+- #define CHILD_FIX_TO_TOP	2
+- 
+- #define CHILD_SELF_SCROLL	0
+- #define CHILD_PARENT_SCROLL	1
+- 
+- #define CHILD_LEFT		16
+- #define CHILD_BOTTOM		18
+- #define CHILD_RIGHT		20
+- #define CHILD_TOP		22
+- #define CHILD_SCROLL_X		24
+- #define CHILD_SCROLL_Y		26
+- 
+- int wimp_poll(int mask, int *block);
+- int wimp_poll_idle(int mask, int *block, int end_time);
+- void ro_open_main(int *block);
+--- 0 ----
+*** ../vim-7.3.186/src/os_riscos.h	2010-08-15 21:57:30.000000000 +0200
+--- src/os_riscos.h	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,166 ****
+- /* vi:set ts=8 sts=4 sw=4:
+-  *
+-  * VIM - Vi IMproved	by Bram Moolenaar
+-  *
+-  * Do ":help uganda"  in Vim to read copying and usage conditions.
+-  * Do ":help credits" in Vim to see a list of people who contributed.
+-  */
+- 
+- #include <sys/types.h>
+- #include <sys/stat.h>
+- #include <sys/ioctl.h>
+- #include <termios.h>
+- #include <stdlib.h>
+- #include <unixlib/local.h>
+- #include <errno.h>
+- #include <fcntl.h>
+- 
+- #define CASE_INSENSITIVE_FILENAME
+- #define FEAT_MODIFY_FNAME
+- #define FEAT_OSFILETYPE
+- #define DFLT_OFT	"Text"
+- #define USE_TERM_CONSOLE
+- #define HAVE_AVAIL_MEM
+- 
+- /* Longer filenames now accessible to all */
+- #ifndef BASENAMELEN
+- # define BASENAMELEN 64 /* Same length as unzip */
+- #endif
+- 
+- #ifndef TEMNAME
+- # define TEMPNAME	"<Wimp$ScrapDir>.v?XXXXXX"
+- # define TEMPNAMELEN	25
+- #endif
+- 
+- #ifndef DFLT_HELPFILE
+- # define DFLT_HELPFILE "Vim:doc.help"
+- #endif
+- 
+- #ifndef DFLT_BDIR
+- # define DFLT_BDIR	".,<Wimp$ScrapDir>."	/* default for 'backupdir' */
+- #endif
+- 
+- /* Paths to try putting swap file in. */
+- #ifndef DFLT_DIR
+- # define DFLT_DIR	"<Wimp$ScrapDir>.,."	/* default for 'directory' */
+- #endif
+- 
+- #ifndef DFLT_VDIR
+- # define DFLT_VDIR	"Choices:Vim.view"	/* default for 'viewdir' */
+- #endif
+- 
+- #ifndef TERMCAPFILE
+- # define TERMCAPFILE	"Vim:TermCap"
+- #endif
+- #define HAVE_TGETENT
+- 
+- #ifndef SYNTAX_FNAME
+- # define SYNTAX_FNAME	"Vim:Syntax.%s"
+- #endif
+- 
+- #ifndef EVIM_FILE
+- # define EVIM_FILE	"Vim:Evim"
+- #endif
+- 
+- #define FEAT_VIMINFO
+- 
+- #ifndef VIMINFO_FILE
+- # define VIMINFO_FILE	"<Choices$Write>.Vim.VimInfo"
+- #endif
+- #ifndef VIMINFO_FILE2
+- # define VIMINFO_FILE2	"Choices:Vim.VimInfo"
+- #endif
+- 
+- #ifndef VIMRC_FILE
+- # define VIMRC_FILE	"/vimrc"
+- #endif
+- #ifndef EXRC_FILE
+- # define EXRC_FILE	"/exrc"
+- #endif
+- #ifndef GVIMRC_FILE
+- # define GVIMRC_FILE	"/gvimrc"
+- #endif
+- #ifndef USR_VIMRC_FILE
+- # define USR_VIMRC_FILE	"Vim:Evim"
+- #endif
+- #ifndef SESSION_FILE
+- # define SESSION_FILE	"/Session.vim"
+- #endif
+- #ifndef USR_VIMRC_FILE
+- # define USR_VIMRC_FILE	"Choices:Vim.VimRC"
+- #endif
+- #ifndef USR_GVIMRC_FILE
+- # define USR_GVIMRC_FILE    "Choices:Vim.GVimRC"
+- #endif
+- #ifndef USR_EXRC_FILE
+- # define USR_EXRC_FILE    "Choices:Vim.ExRC"
+- #endif
+- #ifndef SYS_VIMRC_FILE
+- # define SYS_VIMRC_FILE	    "Vim:VimRC"
+- #endif
+- #ifndef SYS_GVIMRC_FILE
+- # define SYS_GVIMRC_FILE    "Vim:GVimRC"
+- #endif
+- #ifndef SYS_MENU_FILE
+- # define SYS_MENU_FILE	    "Vim:Menu"
+- #endif
+- #ifndef SYS_OPTWIN_FILE
+- # define SYS_OPTWIN_FILE    "Vim:Optwin"
+- #endif
+- #ifndef FILETYPE_FILE
+- # define FILETYPE_FILE	    "Vim:Filetype"
+- #endif
+- #ifndef FTPLUGIN_FILE
+- # define FTPLUGIN_FILE	    "Vim:Ftplugin/vim"
+- #endif
+- #ifndef INDENT_FILE
+- # define INDENT_FILE	    "Vim:Indent/vim"
+- #endif
+- #ifndef FTOFF_FILE
+- # define FTOFF_FILE	    "Vim:Ftoff"
+- #endif
+- #ifndef FTPLUGOF_FILE
+- # define FTPLUGOF_FILE	    "Vim:Ftplugof"
+- #endif
+- #ifndef INDOFF_FILE
+- # define INDOFF_FILE	    "Vim:Indoff"
+- #endif
+- 
+- #define DFLT_ERRORFILE		"errors/vim"
+- #define DFLT_RUNTIMEPATH	"Choices:Vim,Vim:,Choices:Vim.after"
+- 
+- /*
+-  * RISC PCs have plenty of memory, use large buffers
+-  */
+- #define CMDBUFFSIZE 1024	/* size of the command processing buffer */
+- #define MAXPATHL    256		/* paths are always quite short though */
+- 
+- #ifndef DFLT_MAXMEM
+- # define DFLT_MAXMEM	(5*1024)    /* use up to 5 Mbyte for a buffer */
+- #endif
+- 
+- #ifndef DFLT_MAXMEMTOT
+- # define DFLT_MAXMEMTOT	(10*1024)    /* use up to 10 Mbyte for Vim */
+- #endif
+- 
+- #ifdef HAVE_SIGSET
+- # define signal sigset
+- #endif
+- 
+- #define n_flag (1<<31)
+- #define z_flag (1<<30)
+- #define c_flag (1<<29)
+- #define v_flag (1<<28)
+- 
+- /* These take r0-r7 as inputs, returns r0-r7 in global variables. */
+- void swi(int swinum, ...);      /* Handles errors itself */
+- int xswi(int swinum, ...);      /* Returns errors using v flag */
+- extern int r0, r1, r2, r3, r4, r5, r6, r7;  /* For return values */
+- 
+- #include <kernel.h>
+- #include <swis.h>
+- 
+- #define mch_memmove(to, from, len) memmove((char *)(to), (char *)(from), len)
+- #define mch_rename(src, dst) rename(src, dst)
+- #define mch_getenv(x) (char_u *)getenv((char *)x)
+- #define mch_setenv(name, val, x) setenv(name, val, x)
+--- 0 ----
+*** ../vim-7.3.186/src/gui_riscos.c	2011-05-10 15:52:10.000000000 +0200
+--- src/gui_riscos.c	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,3558 ****
+- /* vi:set ts=8 sts=4 sw=4:
+-  *
+-  * VIM - Vi IMproved	by Bram Moolenaar
+-  *
+-  * Do ":help uganda"  in Vim to read copying and usage conditions.
+-  * Do ":help credits" in Vim to see a list of people who contributed.
+-  * See README.txt for an overview of the Vim source code.
+-  */
+- 
+- #include "vim.h"
+- #include <string.h>
+- 
+- /*
+-  * gui_riscos.c
+-  *
+-  * Thomas Leonard <tal197@ecs.soton.ac.uk>
+-  * Updated by Andy Wingate <andy@sparse.net>
+-  */
+- 
+- extern int time_of_last_poll;
+- 
+- int task_handle = 0;		/* Zero means we are not yet a Wimp task */
+- int child_handle = 0;		/* Task handle of our child process (zero if none). */
+- int *wimp_menu = (int *) -1;	/* Pointer to a Wimp menu structure (or -1) */
+- int save_window = -1;		/* Save As window handle */
+- 
+- int *redraw_block = NULL;	/* NULL means not in a redraw loop. */
+- int ro_return_early = FALSE;	/* Break out of gui_mch_wait_for_chars() */
+- 
+- int leaf_ref = 0;		/* Wimp message number - send via Wimp$Scrap */
+- char_u *leaf_name = NULL;	/* Leaf name from DataSave */
+- 
+- int default_columns = 120;	/* These values are used if the --rows and --columns */
+- int default_rows = 32;		/* options aren't used on startup. */
+- 
+- #define DRAG_FALSE	    0
+- #define DRAG_SELECTION	    1
+- #define DRAG_RESIZE_WINDOW  2
+- int ro_dragging = DRAG_FALSE;
+- int drag_button;
+- int drag_modifiers;
+- int drag_x_offset;
+- int drag_y_offset;
+- 
+- int nested_wimp = FALSE;	/* Bool - can we use the new wimp? */
+- 
+- int changed_mode = FALSE;
+- int x_eigen_factor;
+- int y_eigen_factor;
+- 
+- /* If ro_current_font is non-zero then use the outline font with that handle,
+-  * otherwise, if zap_redraw is TRUE then use ZapRedraw, otherwise use the
+-  * system font.
+-  *
+-  * If zap_redraw is TRUE then zap_file[] contains valid Zap font file
+-  * pointers (or NULLs).
+-  */
+- int ro_current_font = 0;	/* 0 is system font, or ZapRedraw */
+- int font_x_offset   = 0;	/* Where to position each char in its box */
+- int font_y_offset   = 0;
+- 
+- int zap_redraw	    = FALSE;
+- int double_height   = FALSE;	/* Plot each line twice? */
+- 
+- #define grgb(r,g,b) ((b<<16) + (g<<8) + (r))
+- #define UNUSED_COLOUR (gui.back_pixel)
+- 
+- #define RO_LOAD_CLIPBOARD -2	/* Internal handle for DataSave message. */
+- 
+- /* Changes by John Kortink, 22-23 July 1998
+-  *
+-  * Stuff to make redraw a lot faster. Almost all of it is right here below,
+-  * elsewhere changes are marked with 'JK230798'. Apart from a small change in
+-  * 'gui.c' all changes are limited to this file, 'gui_riscos.c'. The change in
+-  * 'gui.c' is to make Vim stop being 'smart' not redrawing characters that are
+-  * 'already there' (i.e. from the previous line, by coincidence). This caused a
+-  * lot more calls to the redraw code, which we want to avoid because a few nice
+-  * big strings at a time is a lot faster than a truckload of small ones. ('Dear
+-  * Bram ...').
+-  */
+- 
+- /* The ZapRedraw structure */
+- 
+- static struct
+- {
+-     int		r_flags;
+-     int		r_minx;
+-     int		r_miny;
+-     int		r_maxx;
+-     int		r_maxy;
+-     int		r_screen;
+-     int		r_bpl;
+-     int		r_bpp;
+-     int		r_charw;
+-     int		r_charh;
+-     char	*r_caddr;
+-     int		r_cbpl;
+-     int		r_cbpc;
+-     int		r_linesp;
+-     int		r_data;
+-     int		r_scrollx;
+-     int		r_scrolly;
+-     int		*r_palette;
+-     int		r_for;
+-     int		r_bac;
+-     char	*r_workarea;
+-     int		r_magx;
+-     int		r_magy;
+-     int		r_xsize;
+-     int		r_ysize;
+-     int		r_mode;
+- }
+- zap_redraw_block;
+- 
+- /* Other globals */
+- 
+- static int	zap_redraw_initialised = FALSE;
+- static int	zap_redraw_update_colours;
+- static int	zap_redraw_colours[2];
+- static int	zap_redraw_palette[16];
+- 
+- /* Holds the current Zap font file(s).
+-  * The font is recreated from this block on a mode change.
+-  * When using zap, element ZAP_NORMAL is always valid, but
+-  * the others can be NULL.
+-  */
+- 
+- #define ZAP_NORMAL  0
+- #define ZAP_BOLD    1
+- #define ZAP_ITALIC  2
+- #define ZAP_BITALIC 3
+- #define ZAP_STYLES  4
+- 
+- /* Zap font file format data */
+- static char	*zap_file[ZAP_STYLES] = {NULL, NULL, NULL, NULL};
+- 
+- /* r_caddr format for current mode */
+- static char	*zap_caddr[ZAP_STYLES] = {NULL, NULL, NULL, NULL};
+- 
+- static void ro_remove_menu(int *menu);
+- 
+- /*
+-  * Initialise all the ZapRedraw stuff.
+-  * Call this when changing font and after each mode change.
+-  * zap_redraw_bitmap must contain a valid Zap font file (possibly
+-  * created from the system font).
+-  *
+-  * Return FAIL to revert to system font (if we can't use ZapRedraw).
+-  */
+-     int
+- ro_zap_redraw_initialise()
+- {
+-     int	    bytes_per_bitmap_char;
+-     int	    first, last;
+-     int	    i;
+- 
+-     /* Can't have initialisers for struct members :-(, ok, this way then ... */
+-     if (!zap_redraw_initialised)
+-     {
+- 	zap_redraw_block.r_workarea = NULL;
+- 	zap_redraw_initialised = TRUE;
+-     }
+- 
+-     /* We redraw in DSA mode */
+-     zap_redraw_block.r_flags = 0x0;
+- 
+-     /* Let ZapRedraw get the screen address for us */
+-     zap_redraw_block.r_screen = 0;
+- 
+-     /* Read the font width and height from the font file header.
+-      * Assume that all styles are the same size.
+-      * ZAP_NORMAL is always present.
+-      */
+-     zap_redraw_block.r_charw = ((int *) zap_file[ZAP_NORMAL])[2];
+-     zap_redraw_block.r_charh = ((int *) zap_file[ZAP_NORMAL])[3];
+- 
+-     /* We have no linespacing */
+-     zap_redraw_block.r_linesp = 0;
+- 
+-     /* Fix foreground = colour 1 */
+-     zap_redraw_block.r_for = 1;
+- 
+-     /* Fix background = colour 0 */
+-     zap_redraw_block.r_bac = 0;
+- 
+-     /* Colour mask buffer */
+-     zap_redraw_block.r_palette = zap_redraw_palette;
+- 
+-     /* Allocate local workspace (for the few calls following here) */
+-     if (zap_redraw_block.r_workarea != NULL)
+- 	free(zap_redraw_block.r_workarea);
+-     zap_redraw_block.r_workarea = (char*) malloc(128);
+-     if (!zap_redraw_block.r_workarea)
+- 	return FAIL;	/* Out of memory */
+- 
+-     /* Fill in VDU variables */
+-     if (xswi(ZapRedraw_ReadVduVars, 0, &zap_redraw_block) & v_flag)
+- 	return FAIL;	    /* Can't find ZapRedraw module - use VDU instead */
+- 
+-     /* Determine cbpl and cbpc */
+-     swi(ZapRedraw_CachedCharSize, zap_redraw_block.r_bpp, 0,
+- 	zap_redraw_block.r_charw, zap_redraw_block.r_charh);
+-     zap_redraw_block.r_cbpl = r2;
+-     zap_redraw_block.r_cbpc = r3;
+- 
+-     /* Allocate general workspace (for the calls outside) */
+-     if (zap_redraw_block.r_workarea != NULL)
+- 	free(zap_redraw_block.r_workarea);
+-     zap_redraw_block.r_workarea = (char*) malloc(128 + zap_redraw_block.r_cbpl);
+-     if (!zap_redraw_block.r_workarea)
+- 	return FAIL;	/* Out of memory */
+- 
+-     /* Now convert the 1 bpp character data ready for the current mode */
+- 
+-     bytes_per_bitmap_char = (zap_redraw_block.r_charw * zap_redraw_block.r_charh + 7) / 8;
+- 
+-     /* Convert the fonts from 1bpp to a format suitable for the
+-      * current mode.
+-      */
+-     for (i = 0; i < ZAP_STYLES; i++)
+-     {
+- 	first = ((int *) zap_file[i])[4];
+- 	last  = ((int *) zap_file[i])[5];
+- 
+- 	if (last > 255)
+- 	    last = 255;	/* Don't convert cursors (overwrites memory!) */
+- 
+- 	/* Allocate the font cache */
+- 	vim_free(zap_caddr[i]);
+- 	if (zap_file[i])
+- 	    zap_caddr[i] = (char*) malloc(zap_redraw_block.r_cbpc * 256);
+- 	else
+- 	    zap_caddr[i] = NULL;    /* No file for this style */
+- 
+- 	if (zap_caddr[i])
+- 	{
+- 	    zap_redraw_block.r_caddr = zap_caddr[i];
+- 
+- 	    swi(ZapRedraw_ConvertBitmap, 0, &zap_redraw_block,
+- 		    first, last,		/* Range of characters to convert */
+- 		    zap_file[i] + 0x20	/* Addr of first char provided by font */
+- 		    - first * bytes_per_bitmap_char);
+- 	}
+-     }
+- 
+-     if (!zap_caddr[ZAP_NORMAL])
+-     {
+- 	zap_redraw = FALSE;	/* Out of memory */
+- 	return FAIL;
+-     }
+- 
+-     /* Next time we need them, we have to update the colour masks */
+-     zap_redraw_update_colours = TRUE;
+- 
+-     return OK;
+- }
+- 
+- /*
+-  * Redraw a string at OS coordinates <x,y> (top-left, x inclusive, y exclusive).
+-  * Graphics clip window is window[0..3] as in R1+28..40 of Wimp_RedrawWindow.
+-  * Returns (possibly modified) flags.
+-  */
+-     int
+- ro_zap_redraw_draw_string(x, y, string, length, flags, clip)
+-     int	    x;
+-     int	    y;
+-     char    *string;
+-     int	    length;
+-     int	    flags;	/* DRAW_TRANSP, DRAW_BOLD, DRAW_UNDERL, DRAW_ITALIC */
+-     int	    *clip;
+- {
+-     char redraw_data[1024];
+-     int clip_minx;
+-     int clip_miny;
+-     int clip_maxx;
+-     int clip_maxy;
+-     int os_xshift = zap_redraw_block.r_magx;
+-     int os_yshift = zap_redraw_block.r_magy;
+- 
+-     if (flags & DRAW_TRANSP)
+- 	return flags;	/* We don't do transparent plotting yet. */
+- 
+-     if (flags & DRAW_BOLD)
+-     {
+- 	if (flags & DRAW_ITALIC && zap_caddr[ZAP_BITALIC])
+- 	    zap_redraw_block.r_caddr = zap_caddr[ZAP_BITALIC];
+- 	else
+- 	    zap_redraw_block.r_caddr = zap_caddr[ZAP_BOLD];
+-     }
+-     else
+-     {
+- 	if (flags & DRAW_ITALIC)
+- 	    zap_redraw_block.r_caddr = zap_caddr[ZAP_ITALIC];
+- 	else
+- 	    zap_redraw_block.r_caddr = zap_caddr[ZAP_NORMAL];
+-     }
+-     if (!zap_redraw_block.r_caddr)
+-     {
+- 	zap_redraw_block.r_caddr = zap_caddr[ZAP_NORMAL];
+- 	flags |= DRAW_UNDERL;	    /* Style missing - we can always underline */
+-     }
+- 
+-     /* Set the vertical scaling flag */
+-     if (double_height)
+- 	zap_redraw_block.r_flags = 1 << 1;
+-     else
+- 	zap_redraw_block.r_flags = 0;
+- 
+-     /* Update the colour masks (if needed) */
+-     if (zap_redraw_update_colours)
+-     {
+- 	swi(ZapRedraw_CreatePalette, 2,
+- 		&zap_redraw_block,
+- 		zap_redraw_colours,
+- 		zap_redraw_block.r_palette, 2);
+- 	zap_redraw_update_colours = FALSE;
+-     }
+- 
+-     /* Target rectangle in ZapRedraw rectangle coordinates (pixels, Y-min/max reversed !!!) */
+-     zap_redraw_block.r_minx = x >> os_xshift;					/* inclusive */
+-     zap_redraw_block.r_miny = zap_redraw_block.r_ysize - (y >> os_yshift);	/* inclusive */
+-     zap_redraw_block.r_maxx = (x + length * gui.char_width) >> os_xshift;	/* exclusive */
+-     zap_redraw_block.r_maxy = zap_redraw_block.r_ysize - ((y - gui.char_height) >> os_yshift);
+- 										/* exclusive */
+- 
+-     /* Clip rectangle in ZapRedraw rectangle coordinates (pixels, Y-min/max reversed !!!) */
+-     clip_minx = clip[0] >> os_xshift;					/* inclusive */
+-     clip_miny = zap_redraw_block.r_ysize - (clip[3] >> os_yshift);	/* inclusive */
+-     clip_maxx = clip[2] >> os_xshift;					/* exclusive */
+-     clip_maxy = zap_redraw_block.r_ysize - (clip[1] >> os_yshift);	/* exclusive */
+- 
+-     /* Clip target rectangle against the current graphics window */
+-     if (zap_redraw_block.r_minx < clip_minx)
+-     {
+- 	zap_redraw_block.r_scrollx = clip_minx - zap_redraw_block.r_minx;
+- 	zap_redraw_block.r_minx = clip_minx;
+-     }
+-     else
+- 	zap_redraw_block.r_scrollx = 0;
+-     if (zap_redraw_block.r_miny < clip_miny)
+-     {
+- 	zap_redraw_block.r_scrolly = clip_miny - zap_redraw_block.r_miny;
+- 	zap_redraw_block.r_miny = clip_miny;
+-     }
+-     else
+- 	zap_redraw_block.r_scrolly = 0;
+-     if (zap_redraw_block.r_maxx > clip_maxx)
+- 	zap_redraw_block.r_maxx = clip_maxx;
+-     if (zap_redraw_block.r_maxy > clip_maxy)
+- 	zap_redraw_block.r_maxy = clip_maxy;
+- 
+-     /* Fill in the character data structure */
+-     if (length > (sizeof(redraw_data) - 2 * 4 - 2))
+- 	length = sizeof(redraw_data) - 2 * 4 - 2;
+-     ((int*) redraw_data)[0] = 2 * 4;
+-     ((int*) redraw_data)[1] = 0;
+-     strncpy(redraw_data + 2 * 4, string, length);
+-     redraw_data[2 * 4 + length + 0] = '\0';
+-     redraw_data[2 * 4 + length + 1] = '\x2';
+-     zap_redraw_block.r_data = (int) redraw_data;
+- 
+-     /* Perform the draw */
+-     swi(ZapRedraw_RedrawArea, 0, &zap_redraw_block);
+- 
+-     return flags;
+- }
+- 
+- /*
+-  * Okay that was it from me, back to Thomas ...
+-  */
+- 
+- /*
+-  * Parse the GUI related command-line arguments.  Any arguments used are
+-  * deleted from argv, and *argc is decremented accordingly.  This is called
+-  * when vim is started, whether or not the GUI has been started.
+-  */
+-     void
+- gui_mch_prepare(int *argc, char **argv)
+- {
+-     int	    arg = 1;
+- 
+-     while (arg < *argc - 1)
+-     {
+- 	if (strcmp(argv[arg], "--rows") == 0 || strcmp(argv[arg], "--columns") == 0)
+- 	{
+- 	    int	    value;
+- 
+- 	    value = atoi(argv[arg + 1]);
+- 
+- 	    if (argv[arg][2] == 'r')
+- 		default_rows = value;
+- 	    else
+- 		default_columns = value;
+- 
+- 	    /* Delete argument from argv[]. (hope this is read/write!) */
+- 
+- 	    *argc -= 2;
+- 	    if (*argc > arg)
+- 	    mch_memmove(&argv[arg], &argv[arg + 2], (*argc - arg)
+- 		    * sizeof(char *));
+- 	}
+- 	else
+- 	    arg++;
+-     }
+- }
+- 
+- /* Fatal error on initialisation - report it and die. */
+-     void
+- ro_die(error)
+-     char_u *error;	/* RISC OS error block */
+- {
+-     swi(Wimp_ReportError, error, 5, "GVim");
+-     exit(EXIT_FAILURE);
+- }
+- 
+- /* Find the sizes of the window tools:
+-  *
+-  * Create a test window.
+-  * Find inner and outer sizes.
+-  * Find the difference.
+-  * Delete window.
+-  *
+-  * While we're here, find the eigen values too.
+-  */
+-     void
+- ro_measure_tools()
+- {
+-     int block[10];
+-     int vdu[] = { 4, 5, -1};
+-     int test_window[] =
+- 	{
+- 	    -100, -100,		/* Visible area : min X,Y */
+- 	    -50, -50,		/*		  max X,Y */
+- 	    0,   0,		/* Scroll offsets */
+- 	    -1,			/* Window in front */
+- 	    0xd0800150,		/* Window flags */
+- 	    0xff070207,		/* Colours */
+- 	    0x000c0103,		/* More colours */
+- 	    0, -0x4000,		/* Workarea extent */
+- 	    0x4000, 0,		/* max X,Y */
+- 	    0x00000000,		/* No title */
+- 	    0 << 12,		/* No workarea button type */
+- 	    1,			/* Wimp sprite area */
+- 	    0x00010001,		/* Minimum width, height */
+- 	    0, 0, 0,		/* Title data (none) */
+- 	    0			/* No icons */
+- 	};
+-     int inner_max_x, inner_min_y;
+- 
+-     swi(Wimp_CreateWindow, 0, test_window);
+- 
+-     block[0] = r0;
+-     /* Open the window (and read state).
+-      * GetWindowOutline needs it too if the wimp isn't nested.
+-      */
+-     swi(Wimp_OpenWindow, 0, block);
+-     inner_max_x = block[3];
+-     inner_min_y = block[2];
+- 
+-     swi(Wimp_GetWindowOutline, 0, block);
+- 
+-     gui.scrollbar_width = block[3] - inner_max_x;
+-     gui.scrollbar_height = inner_min_y - block[2];
+- 
+-     swi(Wimp_DeleteWindow, 0, block);
+- 
+-     /* Read the size of one pixel. */
+-     swi(OS_ReadVduVariables, vdu, vdu);
+-     x_eigen_factor = vdu[0];
+-     y_eigen_factor = vdu[1];
+- }
+- 
+- /* Load a template from the current templates file.
+-  * Create the window and return its handle.
+-  */
+-     int
+- ro_load_template(str_name, title, title_size)
+-     char_u  *str_name;      /* Identifier of window in file (max 12 chars)   */
+-     char_u  **title;	    /* If not NULL then return pointer to title here */
+-     int     *title_size;    /* If not NULL then return the title length here */
+- {
+-     int     *window;
+-     char    *data;
+-     int     name[4];
+- 
+-     strcpy( (char *) name, str_name);
+- 
+-     /* Find how big we must make the buffers */
+- 
+-     if (xswi(Wimp_LoadTemplate, 0, 0, 0, 0, -1, name, 0) & v_flag)
+- 	ro_die( (char *) r0);
+- 
+-     window = malloc(r1);	/* Don't print text messages from alloc() */
+-     data = malloc(r2);
+-     if (window == NULL || data == NULL)
+- 	ro_die("\0\0\0\0Out of memory - Can't load templates");
+- 
+-     /* Load the template into the buffers */
+- 
+-     swi(Wimp_LoadTemplate, 0,
+- 				window,		/* Temp block */
+- 				data,		/* Icon data */
+- 				data + r2 + 1,	/* End of icon data */
+- 				-1,		/* No fonts */
+- 				name, 0);	/* First match */
+-     if (r6 == 0)
+- 	ro_die("\0\0\0\0Can't find window in Templates file");
+- 
+-     /* Create the window */
+- 
+-     if (xswi(Wimp_CreateWindow, 0, window) & v_flag)
+- 	ro_die( (char *) r0);
+- 
+-     if (title)
+- 	*title = (char_u *) window[18];
+-     if (title_size)
+- 	*title_size = window[20];
+- 
+-     free(window);	/* Free temp block */
+-     return r0;		/* Return the window handle */
+- }
+- 
+- /*
+-  * Check if the GUI can be started.  Called before gvimrc is sourced.
+-  * Return OK or FAIL.
+-  */
+-     int
+- gui_mch_init_check()
+- {
+-     return OK;		/* TODO: GUI can always be started? */
+- }
+- 
+- /*
+-  * Initialise the RISC OS GUI.
+-  * Create all the windows.
+-  * Returns OK for success, FAIL when the GUI can't be started.
+-  */
+-     int
+- gui_mch_init()
+- {
+-     int     messages[] = {
+- 	    1, 2, 3, 4,	/* DataSave, DataSaveAck, DataLoad, DataLoadAck */
+- 	    8,		/* PreQuit */
+- 	    0xf,	/* ClaimEntity (for clipboard) */
+- 	    0x10,	/* DataRequest (for clipboard) */
+- 	    0x400c1,	/* Mode change */
+- 	    0x400c3,	/* TaskCloseDown */
+- 	    0x400c9,	/* MenusDeleted */
+- 	    0x808c1,	/* TW_Output */
+- 	    0x808c2,    /* TW_Ego */
+- 	    0x808c3,	/* TW_Morio */
+- 	    0x808c4,	/* TW_Morite */
+- 	    0};		/* End-of-list. */
+- 
+- 
+-     /* There may have been some errors reported in the
+-      * command window before we get here. Wait if so.
+-      */
+-     swi(Wimp_ReadSysInfo, 3);
+-     if (r0 == 0)
+- 	swi(Wimp_CommandWindow, 0);	/* Window opened - close with prompt */
+- 
+-     if (xswi(Wimp_Initialise, 310, 0x4b534154, "GVim", messages) & v_flag)
+- 	return FAIL;
+-     nested_wimp = r0 >= 397;
+-     task_handle = r1;
+- 
+-     /* Load the templates. */
+- 
+-     if (xswi(Wimp_OpenTemplate, 0, "Vim:Templates") & v_flag)
+- 	ro_die( (char *) r0);
+- 
+-     gui.window_handle = ro_load_template("editor",
+- 	    &gui.window_title,
+- 	    &gui.window_title_size);
+- 
+-     save_window = ro_load_template("save", NULL, NULL);
+- 
+-     swi(Wimp_CloseTemplate);
+- 
+-     /* Set default foreground and background colours. */
+- 
+-     gui.norm_pixel = gui.def_norm_pixel;
+-     gui.back_pixel = gui.def_back_pixel;
+- 
+-     /* Get the colours from the "Normal" and "Menu" group (set in syntax.c or
+-      * in a vimrc file) */
+- 
+-     set_normal_colors();
+- 
+-     /*
+-      * Check that none of the colors are the same as the background color
+-      */
+- 
+-     gui_check_colors();
+- 
+-     /* Get the colours for the highlight groups (gui_check_colors() might have
+-      * changed them) */
+- 
+-     highlight_gui_started();		/* re-init colours and fonts */
+- 
+-     /* Set geometry based on values read on initialisation. */
+- 
+-     gui.num_cols = Columns = default_columns;
+-     gui.num_rows = Rows    = default_rows;
+- 
+-     /* Get some information about our environment. */
+- 
+-     ro_measure_tools();
+- 
+-     return OK;
+- }
+- 
+- /*
+-  * Called when the foreground or background colour has been changed.
+-  */
+-     void
+- gui_mch_new_colors()
+- {
+- }
+- 
+- /*
+-  * Open the GUI window which was created by a call to gui_mch_init().
+-  */
+-     int
+- gui_mch_open(void)
+- {
+-     int block[10];
+- 
+-     block[0] = gui.window_handle;
+-     swi(Wimp_GetWindowState, 0, block);
+-     block[7] = -1;		    /* Open at the top of the stack */
+-     swi(Wimp_OpenWindow, 0, block);
+- 
+-     /* Give the new window the input focus */
+-     swi(Wimp_SetCaretPosition, gui.window_handle, -1, 0, 0, -1, -1);
+- 
+-     if (gui_win_x != -1 && gui_win_y != -1)
+- 	gui_mch_set_winpos(gui_win_x, gui_win_y);
+- 
+-     return OK;
+- }
+- 
+-     void
+- gui_mch_exit(int rc)
+- {
+-     int	    block[64];
+- 
+-     /* Close window. Stops us from getting troublesome events
+-      * if we take a while to die.
+-      */
+-     block[0] = gui.window_handle;
+-     swi(Wimp_CloseWindow, 0, block);
+- 
+-     if (child_handle)
+-     {
+- 	/* We still have a sub-task running - kill it */
+- 	block[0] = 20;
+- 	block[3] = 0;
+- 	block[4] = 0;	    /* Quit */
+- 	if ((xswi(Wimp_SendMessage, 17, block, child_handle) & v_flag) == 0)
+- 	{
+- 	    /* Idle until child dies. */
+- 	    while (child_handle)
+- 	    {
+- 		process_event(wimp_poll(1, block), block);
+- 	    }
+- 	}
+-     }
+- 
+-     exit(rc);
+- }
+- 
+- /*
+-  * Get the position of the top left corner of the window.
+-  */
+-     int
+- gui_mch_get_winpos(int *x, int *y)
+- {
+-     /* TODO */
+-     return FAIL;
+- }
+- 
+- /*
+-  * Set the position of the top left corner of the window to the given
+-  * coordinates.
+-  */
+-     void
+- gui_mch_set_winpos(int x, int y)
+- {
+-     /* TODO */
+- }
+- 
+-     void
+- gui_mch_set_shellsize(width, height, min_width, min_height, base_width, base_height, direction)
+-     int width;		/* In OS units */
+-     int height;
+-     int min_width;	/* Smallest permissible window size (ignored) */
+-     int min_height;
+-     int base_width;	/* Space for scroll bars, etc */
+-     int base_height;
+-     int direction;
+- {
+-     int s_width, s_height;
+-     int block[] = {
+- 	gui.window_handle,
+- 	0,
+- 	-height + 1,
+- 	width,
+- 	1};
+- 
+-     gui_mch_get_screen_dimensions(&s_width, &s_height);
+-     s_width -= base_width;
+-     s_height -= base_height;		    /* Underestimate - ignores titlebar */
+- 
+-     swi(Wimp_GetWindowState, 0, block);
+-     block[3]  = block[1] + width;
+-     block[2]  = block[4] - height;
+-     if (block[3] > s_width)
+-     {
+- 	block[3] = s_width;
+- 	block[1] = block[3] - width;
+-     }
+-     if (block[2] < gui.scrollbar_height)
+-     {
+- 	block[2] = gui.scrollbar_height;
+- 	block[4] = block[2] + height;
+-     }
+-     swi(Wimp_OpenWindow, 0, block);
+-     swi(Wimp_ForceRedraw, gui.window_handle, 0, -height, width, 0);
+- }
+- 
+-     void
+- gui_mch_get_screen_dimensions(int *screen_w, int *screen_h)
+- {
+-     int block[] = {4, 5, 11, 12, -1};
+- 
+-     swi(OS_ReadVduVariables, block, block);
+-     *screen_w = (block[2] + 1) << block[0];
+-     *screen_h = (block[3] + 1) << block[1];
+- }
+- 
+- /* Take a font name with options and return a font handle, or
+-  * zero for failure.
+-  * Replace extension with 'Bold' or 'Italic' depending on modifiers.
+-  */
+-     int
+- ro_get_font(fullname, weight)
+-     char_u	*fullname;
+-     int		weight;		/* Initial weights:
+- 				 * BIT	    MEANING
+- 				 * 0	    bold
+- 				 * 1	    italic
+- 				 */
+- {
+-     char_u	*arg;
+-     char_u	font[41];
+-     int		width = -1;
+-     int		height = -1;
+-     int		name_len;
+-     int		i;
+-     char_u	c;
+- 
+-     for (i = 0; i < 39;)
+-     {
+- 	c = fullname[i];
+- 	if (c == ':' || c == NUL || c == '.')
+- 	    break;
+- 	font[i++] = c;
+-     }
+- 
+-     /* find the first modifier, NULL if none */
+-     arg = strchr(fullname + i, ':');
+- 
+-     while (arg)
+-     {
+- 	switch (*++arg)
+- 	{
+- 	    case 'h':
+- 		height = strtol(arg + 1, (char **) &arg, 10);
+- 		break;
+- 	    case 'w':
+- 		width = strtol(arg + 1, (char **) &arg, 10);
+- 		break;
+- 	    case 'b':
+- 		weight |= 1;
+- 		break;
+- 	    case 'i':
+- 		weight |= 2;
+- 		break;
+- 	    default:
+- 		return 0;
+- 	}
+- 	arg = strchr(arg, ':');
+-     }
+- 
+-     if ((weight & 1) && i < 35)
+-     {
+- 	/* Bold goes instead of given suffix */
+- 	strncpy(font + i, ".Bold", 5);
+- 	i += 5;
+-     }
+-     else
+-     {
+- 	/* Copy rest of name unless we are using Bold */
+- 	while (i < 39)
+- 	{
+- 	    c = fullname[i];
+- 	    if (c == ':' || c == NUL)
+- 		break;
+- 	    font[i++] = c;
+- 	}
+-     }
+-     if ((weight & 2) && i < 32)
+-     {
+- 	strncpy(font + i, ".Oblique", 8);
+- 	i += 8;
+-     }
+- 
+-     font[i] = 0;
+- 
+-     if (height < 1 && width < 1)
+- 	height = width = 10;	/* Default to 10pt */
+-     else if (height < 1)
+- 	height = width;
+-     else if (width < 1)
+- 	width = height;
+- 
+-     if (xswi(Font_FindFont, 0, font, width << 4, height << 4, 0, 0) & v_flag)
+- 	return NOFONT;		/* Can't find font */
+- 
+-     return r0;
+- }
+- 
+- /* Load a file into allocated memory and check it is valid.
+-  * Return a pointer to the allocated block on success.
+-  */
+-     char    *
+- zap_load_file(name, style)
+-     char_u  *name;	    /* Name of directory containing styles */
+-     char_u  *style;	    /* Name of style within directory */
+- {
+-     char_u  fname[256];
+-     char_u  *file;
+- 
+-     if (strlen(name) + strlen(style) > 254)
+- 	return NULL;	    /* Names too long */
+- 
+-     sprintf(fname, "%s.%s", name, style);
+- 
+-     /* Load the named font in 1bpp format. */
+-     if (xswi(OS_File, 13, fname, 0, 0, "VimFonts:") & v_flag || r0 != 1)
+- 	return NULL;	    /* Error reading file info, or not a file */
+- 
+-     /* Allocate enough memory to load the whole file */
+-     file = (char *) alloc(r4);
+-     if (!file)
+- 	return NULL;	/* Out of memory */
+- 
+-     if (xswi(OS_File, 12, fname, file, 0, "VimFonts:") & v_flag)
+- 	return NULL;	/* Unable to load file */
+- 
+-     if (strncmp(file, "ZapFont\015", 8) == 0)
+- 	return file;	/* Loaded OK! */
+- 
+-     vim_free(file);
+-     return NULL;	/* Not a valid font file */
+- }
+- 
+- /* Load and convert the named font.
+-  * If name is NULL or a null string then convert the system font.
+-  * Return OK on success; FAIL and we revert to using the VDU drivers.
+-  *
+-  * 'name' is the name of a directory.
+-  * Tries to load 'name.0', 'name.B', 'name.I' and 'name.IB'.
+-  */
+-     int
+- zap_load_font(name)
+-     char_u  *name;
+- {
+-     int	    i;
+- 
+-     /* Free the existing font files, if any */
+-     for (i = 0; i < ZAP_STYLES; i++)
+-     {
+- 	vim_free(zap_file[i]);
+- 	zap_file[i] = NULL;
+-     }
+- 
+-     if (name && *name == '!')
+-     {
+- 	name++;
+- 	double_height = TRUE;
+-     }
+-     else
+- 	double_height = FALSE;
+- 
+-     if (name && *name)
+-     {
+- 	zap_file[ZAP_NORMAL]	= zap_load_file(name, "0");
+- 	if (!zap_file[ZAP_NORMAL])
+- 	    return FAIL;	/* Can't load the 'normal' style - error */
+- 
+- 	zap_file[ZAP_BOLD]	= zap_load_file(name, "B");
+- 	zap_file[ZAP_ITALIC]	= zap_load_file(name, "I");
+- 	zap_file[ZAP_BITALIC]	= zap_load_file(name, "IB");
+-     }
+-     else
+-     {
+- 	int	*header;
+- 	char	workarea[16];
+- 	char	*old_wa;
+- 
+- 	/* Allocate memory for system font (8 x 8 x 256 bits, plus header) */
+- 	header = (int *) alloc(0x20 + 8 * 256);
+- 	if (header == NULL)
+- 	    return FAIL;
+- 	zap_file[ZAP_NORMAL] = (char *) header;
+- 
+- 	/* Store details about the system font */
+- 	header[2] = 8;	    /* Width */
+- 	header[3] = 8;	    /* Height */
+- 	header[4] = 0;	    /* First char */
+- 	header[5] = 255;    /* Last char */
+- 	header[6] = header[7] = 0;  /* Reserved */
+- 
+- 	/* Get system font bitmap */
+- 	old_wa = zap_redraw_block.r_workarea;
+- 	zap_redraw_block.r_workarea = workarea;
+- 	swi(ZapRedraw_ReadSystemChars, zap_file[ZAP_NORMAL] + 0x20, &zap_redraw_block);
+- 	zap_redraw_block.r_workarea = old_wa;
+-     }
+- 
+-     return ro_zap_redraw_initialise();
+- }
+- 
+- /*
+-  * Initialise vim to use the font with the given name.
+-  * Return FAIL if the font could not be loaded, OK otherwise.
+-  */
+-     int
+- gui_mch_init_font(char_u *font_name, int fontset)
+- {
+-     int	    new_handle	= 0;	    /* Use the system font by default */
+- 
+-     if (font_name[0] == '!')
+-     {
+- 	/* Select a ZapRedraw font */
+- 	if (zap_load_font(font_name + 1))
+- 	    zap_redraw = TRUE;
+- 	else
+- 	{
+- 	    EMSG2(_("E610: Can't load Zap font '%s'"), font_name);
+- 	    font_name = "System";   /* Error - use system font */
+- 	    zap_redraw = FALSE;
+- 	}
+-     }
+-     else
+-     {
+- 	zap_redraw = FALSE;
+- 
+- 	if (font_name)
+- 	{
+- 	    /* Extract any extra details about the font */
+- 	    new_handle = ro_get_font(font_name, 0);
+- 	    if (!new_handle)
+- 		return FAIL;
+- 	}
+- 	else
+- 	    font_name = "System";
+-     }
+- 
+-     /* Free the previous font, if any */
+-     gui_mch_free_font(gui.norm_font);
+-     gui.norm_font = new_handle;
+-     gui.char_ascent = 0;
+- 
+-     if (new_handle)
+-     {
+- 	/* Read details about the chosen font */
+- 	swi(Font_ReadInfo, new_handle);
+- 
+- 	gui.char_width	= r3 - r1;
+- 	gui.char_height = r4 - r2;
+- 
+- 	font_x_offset = -r1;	/* Where to position each char in its box */
+- 	font_y_offset = -r4;
+- 
+- 	/* Try to load other fonts for bold, italic, and bold-italic */
+- 	gui_mch_free_font(gui.bold_font);
+- 	gui.bold_font = ro_get_font(font_name, 1);
+- 	gui_mch_free_font(gui.ital_font);
+- 	gui.ital_font = ro_get_font(font_name, 2);
+- 	gui_mch_free_font(gui.boldital_font);
+- 	gui.boldital_font = ro_get_font(font_name, 3);
+-     }
+-     else
+-     {
+- 	/* Use the system font or ZapRedraw. */
+- 	if (zap_redraw)
+- 	{
+- 	    gui.char_width	= zap_redraw_block.r_charw << zap_redraw_block.r_magx;
+- 	    gui.char_height	= zap_redraw_block.r_charh << zap_redraw_block.r_magy;
+- 	    if (double_height)
+- 		gui.char_height <<= 1;
+- 	}
+- 	else
+- 	{
+- 	    gui.char_width	= 16;
+- 	    gui.char_height	= 32;
+- 	}
+- 
+- 	gui_mch_free_font(gui.bold_font);
+- 	gui.bold_font = 0;
+- 	gui_mch_free_font(gui.ital_font);
+- 	gui.ital_font = 0;
+- 	gui_mch_free_font(gui.boldital_font);
+- 	gui.boldital_font = 0;
+-     }
+-     hl_set_font_name(font_name);
+- 
+-     must_redraw = CLEAR;
+-     return OK;
+- }
+- 
+- /*
+-  * Adjust gui.char_height (after 'linespace' was changed).
+-  */
+-     int
+- gui_mch_adjust_charheight()
+- {
+-     return FAIL;
+- }
+- 
+- /*
+-  * Get a font structure for highlighting.
+-  */
+-     GuiFont
+- gui_mch_get_font(name, giveErrorIfMissing)
+-     char_u	*name;
+-     int		giveErrorIfMissing;
+- {
+-     int		handle;
+- 
+-     if (!name)
+- 	return NOFONT;		/* System font if no name */
+- 
+-     handle = ro_get_font(name, 0);
+-     if (!handle)
+-     {
+- 	if (giveErrorIfMissing)
+- 	    EMSG2(_("E611: Can't use font %s"), name);
+- 	return NOFONT;
+-     }
+- 
+-     return handle;
+- }
+- 
+- #if defined(FEAT_EVAL) || defined(PROTO)
+- /*
+-  * Return the name of font "font" in allocated memory.
+-  * Don't know how to get the actual name, thus use the provided name.
+-  */
+-     char_u *
+- gui_mch_get_fontname(font, name)
+-     GuiFont font;
+-     char_u  *name;
+- {
+-     if (name == NULL)
+- 	return NULL;
+-     return vim_strsave(name);
+- }
+- #endif
+- 
+- /*
+-  * Set the current text font.
+-  */
+-     void
+- gui_mch_set_font(GuiFont font)
+- {
+-     ro_current_font = font;
+- 
+-     if (font)
+-     {
+- 	/* Not the system font or ZapRedraw font - select it */
+- 	swi(Font_SetFont, font);
+-     }
+- }
+- 
+- /*
+-  * If a font is not going to be used, free its structure.
+-  */
+-     void
+- gui_mch_free_font(GuiFont font)
+- {
+-     if (font)
+- 	swi(Font_LoseFont, font);
+- }
+- 
+- /*
+-  * Return the Pixel value (colour) for the given colour name.
+-  * Return INVALCOLOR for error.
+-  * NB: I've changed Green for now, since it looked really sick
+-  */
+-     guicolor_T
+- gui_mch_get_color(char_u *name)
+- {
+-     int		i;
+-     struct colour
+-     {
+- 	char_u		*name;
+- 	guicolor_T	value;
+-     } colours[] =
+-     {
+- 	{ "Red",		grgb(255,	0,	0)	},
+- 	{ "LightRed",		grgb(255,	0,	0)	},
+- 	{ "DarkRed",		grgb(139,	0,	0)	},
+- 
+- 	{ "Green",		grgb(50,	200,	50)	},
+- 	{ "LightGreen",		grgb(144,	238,	144)	},
+- 	{ "DarkGreen",		grgb(0,		100,	0)	},
+- 	{ "SeaGreen",		grgb(46,	139,	87)	},
+- 
+- 	{ "Blue",		grgb(0,		0,	255)	},
+- 	{ "LightBlue",		grgb(173,	216,	230)	},
+- 	{ "DarkBlue",		grgb(0,		0,	139)	},
+- 	{ "SlateBlue",		grgb(160,	90,	205)	},
+- 
+- 	{ "Cyan",		grgb(0,		255,	255)	},
+- 	{ "LightCyan",		grgb(224,	255,	255)	},
+- 	{ "DarkCyan",		grgb(0,		139,	139)	},
+- 
+- 	{ "Magenta",		grgb(255,	0,	255)	},
+- 	{ "LightMagenta",	grgb(255,	224,	255)	},
+- 	{ "DarkMagenta",	grgb(139,	0,	139)	},
+- 
+- 	{ "Yellow",		grgb(255,	255,	0)	},
+- 	{ "LightYellow",	grgb(255,	255,	224)	},
+- 	{ "DarkYellow",		grgb(139,	139,	0)	},
+- 	{ "Brown",		grgb(165,	42,	42)	},
+- 
+- 	{ "Gray",		grgb(190,	190,	190)	},
+- 	{ "Grey",		grgb(190,	190,	190)	},
+- 	{ "LightGray",		grgb(211,	211,	211)	},
+- 	{ "LightGrey",		grgb(211,	211,	211)	},
+- 	{ "DarkGray",		grgb(169,	169,	169)	},
+- 	{ "DarkGrey",		grgb(169,	169,	169)	},
+- 	{ "Gray10",		grgb(26,	26,	26)	},
+- 	{ "Grey10",		grgb(26,	26,	26)	},
+- 	{ "Gray20",		grgb(51,	51,	51)	},
+- 	{ "Grey20",		grgb(51,	51,	51)	},
+- 	{ "Gray30",		grgb(77,	77,	77)	},
+- 	{ "Grey30",		grgb(77,	77,	77)	},
+- 	{ "Gray40",		grgb(102,	102,	102)	},
+- 	{ "Grey40",		grgb(102,	102,	102)	},
+- 	{ "Gray50",		grgb(127,	127,	127)	},
+- 	{ "Grey50",		grgb(127,	127,	127)	},
+- 	{ "Gray60",		grgb(153,	153,	153)	},
+- 	{ "Grey60",		grgb(153,	153,	153)	},
+- 	{ "Gray70",		grgb(179,	179,	179)	},
+- 	{ "Grey70",		grgb(179,	179,	179)	},
+- 	{ "Gray80",		grgb(204,	204,	204)	},
+- 	{ "Grey80",		grgb(204,	204,	204)	},
+- 	{ "Gray90",		grgb(229,	229,	229)	},
+- 	{ "Grey90",		grgb(229,	229,	229)	},
+- 
+- 	{ "Black",		grgb(0,		0,	0)	},
+- 	{ "White",		grgb(255,	255,	255)	},
+- 
+- 	{ "Orange",		grgb(255,	165,	0)	},
+- 	{ "Purple",		grgb(160,	32,	240)	},
+- 	{ "Violet",		grgb(238,	130,	238)	},
+- 	{NULL, 0}
+-     };
+- 
+-     if (name[0] == '#')
+-     {
+- 	char	    *end;
+- 	int	    c;
+- 
+- 	c = strtol(name + 1, &end, 16);
+- 	return (guicolor_T) ((c >> 16) & 0xff) | (c & 0xff00) | ((c & 0xff) << 16);
+-     }
+- 
+-     for (i = 0; colours[i].name != NULL; i++)
+-     {
+- 	if (STRICMP(name, colours[i].name) == 0)
+- 	    return colours[i].value;
+-     }
+-     if (strnicmp(name, "grey", 4) == 0 || strnicmp(name, "gray", 4) == 0)
+-     {
+- 	int level = (255 * atoi(name + 4)) / 100;
+- 	return (guicolor_T) grgb(level, level, level);
+-     }
+-     return INVALCOLOR;
+- }
+- 
+- /*
+-  * Set the current text colours.
+-  * If we are using fonts then set the antialiasing colours too.
+-  */
+-     void
+- gui_mch_set_colors(guicolor_T fg, guicolor_T bg)
+- {
+-     zap_redraw_colours[0] = bg << 8;	/* JK230798, register new background colour */
+-     zap_redraw_colours[1] = fg << 8;	/* JK230798, register new foreground colour */
+-     zap_redraw_update_colours = TRUE;	/* JK230798, need update of colour masks */
+- 
+-     swi(ColourTrans_ReturnGCOL, fg << 8);
+-     gui.fg_colour = r0;
+-     swi(ColourTrans_ReturnGCOL, bg << 8);
+-     gui.bg_colour = r0;
+- 
+-     if (ro_current_font)
+- 	swi(ColourTrans_SetFontColours, 0, bg << 8, fg << 8, 14);
+- }
+- 
+-     void
+- ro_draw_string(x, y, s, len, flags, clip)
+-     int	    x;		/* Top-left coord to plot at (x incl, y excl) */
+-     int	    y;		/* (screen coords) */
+-     char_u  *s;		/* String to plot */
+-     int	    len;	/* Length of string */
+-     int	    flags;	/* DRAW_TRANSP, DRAW_BOLD, DRAW_UNDERL */
+-     int*    clip;	/* JK230798, added clip window */
+- {
+-     if (ro_current_font)
+-     {
+- 	int	fx;
+- 	int	flen = len;	/* Preserve for underline */
+- 
+- 	/* Use the Font manager to paint the string.
+- 	 * Must do one char at a time to get monospacing.
+- 	 */
+- 
+- 	if (flags & DRAW_ITALIC && !gui.ital_font)
+- 	    flags |= DRAW_UNDERL;	/* No italic - underline instead */
+- 
+- 	if ((flags & DRAW_TRANSP) == 0)
+- 	{
+- 	    swi(ColourTrans_SetColour, gui.bg_colour, 0, 0, 0, 0);
+- 	    swi(OS_Plot, 4, x, y - gui.char_height);
+- 	    swi(OS_Plot, 96 + 5, x + len * gui.char_width - 1, y - 1);
+- 	}
+- 
+- 	fx = x + font_x_offset;
+- 	while (flen--)
+- 	{
+- 	    swi(Font_Paint, 0, s++, 0x90, fx, y + font_y_offset, 0, 0, 1);
+- 	    fx += gui.char_width;
+- 	}
+-     }
+-     else
+-     {
+- 	if (zap_redraw)
+- 	{
+- 	    /* Using fast Zap redraw. */
+- 	    flags = ro_zap_redraw_draw_string(x, y, s, len, flags, clip);
+- 	}
+- 	else
+- 	{
+- 	    /* Using the system font */
+- 	    if (flags & DRAW_ITALIC)
+- 		flags |= DRAW_UNDERL;
+- 
+- 	    if ((flags & DRAW_TRANSP) == 0)
+- 	    {
+- 		swi(ColourTrans_SetColour, gui.bg_colour, 0, 0, 0, 0);
+- 		swi(OS_Plot, 4, x, y - gui.char_height);
+- 		swi(OS_Plot, 96 + 5, x + len * gui.char_width - 1, y - 1);
+- 	    }
+- 	    swi(OS_Plot, 4,			/* Move the drawing cursor */
+- 		    x,
+- 		    y - 1);
+- 	    swi(ColourTrans_SetColour, gui.fg_colour, 0, 0, 0, 0);
+- 	    swi(OS_WriteN, s, len);
+- 
+- 	    if (flags & DRAW_BOLD)
+- 	    {
+- 		swi(OS_Plot, 4, x + (1 << x_eigen_factor), y - 1);
+- 		swi(OS_WriteN, s, len);
+- 	    }
+- 	}
+-     }
+- 
+-     if (flags & DRAW_UNDERL)
+-     {
+- 	if (ro_current_font || zap_redraw)
+- 	    swi(ColourTrans_SetColour, gui.fg_colour, 0, 0, 0, 0);
+- 	/* Underlined is the same with all plotting methods */
+- 	swi(OS_Plot, 4, x, y - gui.char_height);
+- 	swi(OS_Plot, 1, gui.char_width * len, 0);
+-     }
+- }
+- 
+-     void
+- gui_mch_draw_string(int row, int col, char_u *s, int len, int flags)
+- {
+-     int x, y;		/* Workarea x,y */
+-     x = col * gui.char_width;
+-     y = -row * gui.char_height;
+- 
+-     if (redraw_block)
+-     {
+- 	ro_draw_string(x + redraw_block[1], y + redraw_block[4],
+- 			s, len, flags, &redraw_block[7]);	/* JK230798, added clip window */
+-     }
+-     else
+-     {
+- 	int block[44];
+- 	block[0] = gui.window_handle;
+- 	block[1] = x;
+- 	block[2] = y - gui.char_height;
+- 	block[3] = (col + len) * gui.char_width;
+- 	block[4] = y;
+- 	swi(Wimp_UpdateWindow, 0, block);
+- 	while (r0)
+- 	{
+- 	    ro_draw_string(x + block[1], y + block[4],
+- 			s, len, flags, &block[7]);	/* JK230798, added clip window */
+- 	    swi(Wimp_GetRectangle, 0, block);
+- 	}
+-     }
+- }
+- 
+- /*
+-  * Return OK if the key with the termcap name "name" is supported.
+-  */
+-     int
+- gui_mch_haskey(char_u *name)
+- {
+-     return FAIL;
+- }
+- 
+-     void
+- gui_mch_beep(void)
+- {
+-     swi(OS_WriteI + 7);
+- }
+- 
+- /*
+-  * Visual bell.
+-  */
+-     void
+- gui_mch_flash(int msec)
+- {
+-     /* TODO */
+- }
+- 
+- 
+- /*
+-  * Plot a solid rectangle using the given plot action and colour.
+-  * Coordinates are inclusive and window-relative.
+-  */
+-     void
+- plot_rectangle(plot, colour, minx, miny, maxx, maxy)
+-     int plot;		/* OS_Plot action */
+-     int colour;
+-     int minx;
+-     int miny;
+-     int maxx;
+-     int maxy;
+- {
+-     if (redraw_block)
+-     {
+- 	swi(ColourTrans_SetColour, colour, 0, 0, 0, 0);
+- 	swi(OS_Plot, 4, minx + redraw_block[1], miny + redraw_block[4]);
+- 	swi(OS_Plot, plot, maxx + redraw_block[1], maxy + redraw_block[4]);
+-     }
+-     else
+-     {
+- 	int block[44];
+- 	block[0] = gui.window_handle;
+- 	block[1] = minx;
+- 	block[2] = miny;
+- 	block[3] = maxx + 1;
+- 	block[4] = maxy + 1;
+- 	swi(Wimp_UpdateWindow, 0, block);
+- 	while (r0)
+- 	{
+- 	    swi(ColourTrans_SetColour, colour, 0, 0, 0, 0);
+- 	    swi(OS_Plot, 4, minx + block[1], miny + block[4]);
+- 	    swi(OS_Plot, plot, maxx + block[1], maxy + block[4]);
+- 	    swi(Wimp_GetRectangle, 0, block);
+- 	}
+-     }
+- }
+- 
+- /*
+-  * Invert a rectangle from row r, column c, for nr rows and nc columns.
+-  */
+-     void
+- gui_mch_invert_rectangle(int r, int c, int nr, int nc)
+- {
+-     plot_rectangle(96 + 6, 0, FILL_X(c), -FILL_Y(r + nr), FILL_X(c + nc), -FILL_Y(r));
+- }
+- 
+- /*
+-  * Iconify the GUI window.
+-  */
+-     void
+- gui_mch_iconify(void)
+- {
+- }
+- 
+- #if defined(FEAT_EVAL) || defined(PROTO)
+- /*
+-  * Bring the Vim window to the foreground.
+-  */
+-     void
+- gui_mch_set_foreground()
+- {
+-     /* TODO */
+- }
+- #endif
+- 
+- /* Draw a hollow rectangle relative to the current
+-  * graphics cursor position, with the given width
+-  * and height. Start position is top-left.
+-  */
+-     void
+- draw_hollow(w, h)
+-     int	w;
+-     int	h;
+- {
+-     swi(OS_Plot, 1, w - 1, 0);
+-     swi(OS_Plot, 1, 0, 1 - h);
+-     swi(OS_Plot, 1, 1 - w, 0);
+-     swi(OS_Plot, 1, 0, h - 1);
+- }
+- 
+- /*
+-  * Draw a cursor without focus.
+-  */
+-     void
+- gui_mch_draw_hollow_cursor(guicolor_T colour)
+- {
+-     int x = FILL_X(gui.cursor_col);	/* Window relative, top-left */
+-     int y = -FILL_Y(gui.cursor_row);
+-     if (redraw_block == NULL)
+-     {
+- 	int block[11];
+- 
+- 	block[0] = gui.window_handle;
+- 	block[1] = x;
+- 	block[2] = y - gui.char_height;
+- 	block[3] = x + gui.char_width;
+- 	block[4] = y;
+- 	swi(Wimp_UpdateWindow, 0, block);
+- 	while (r0)
+- 	{
+- 	    swi(ColourTrans_SetGCOL, colour << 8, 0, 0, 0, 0);
+- 
+- 	    swi(OS_Plot, 4, x + block[1], y + block[4] - 1);
+- 	    draw_hollow(gui.char_width, gui.char_height);
+- 
+- 	    swi(Wimp_GetRectangle, 0, block);
+- 	}
+-     }
+-     else
+-     {
+- 	swi(ColourTrans_SetGCOL, colour << 8, 0, 0, 0, 0);
+- 
+- 	swi(OS_Plot, 4, x + redraw_block[1], y + redraw_block[4] - 1);
+- 	draw_hollow(gui.char_width, gui.char_height);
+-     }
+- }
+- 
+- /*
+-  * Draw part of a cursor, "w" pixels wide, and "h" pixels high, using
+-  * color "color".
+-  */
+-     void
+- gui_mch_draw_part_cursor(w, h, colour)
+-     int w;
+-     int h;
+-     guicolor_T colour;
+- {
+-     int x = FILL_X(gui.cursor_col);
+-     int y = -FILL_Y(gui.cursor_row);
+-     swi(ColourTrans_ReturnGCOL, colour << 8);
+-     plot_rectangle(96 + 5, r0, x, y - h, x + w - 1, y - 1);
+- }
+- 
+- /*
+-  * Catch up with any queued events.  This may put keyboard input into the
+-  * input buffer, call resize call-backs, trigger timers etc.
+-  * If there is nothing in the event queue(& no timers pending), then we return
+-  * immediately (well, after a Wimp_Poll).
+-  */
+-     void
+- gui_mch_update(void)
+- {
+-     int block[64];
+-     int reason;
+- 
+-     swi(OS_ReadMonotonicTime);
+-     if ((r0 - time_of_last_poll) < 50)
+- 	return;			    /* Don't return too often */
+- 
+-     reason = wimp_poll(0, block);
+-     if (reason)
+- 	process_event(reason, block);
+-     ro_return_early = FALSE;		/* We're returning anyway. */
+- }
+- 
+-     void
+- redraw_window(block)
+-     int *block;
+- {
+-     int x, y;			/* Vim workarea coords */
+-     int width, height;
+-     int blank_col;
+- 
+-     swi(ColourTrans_ReturnGCOL, UNUSED_COLOUR << 8, 0, 0, 1<<7, 0);
+-     blank_col = r0;
+- 
+-     swi(Wimp_RedrawWindow, 0, block);
+-     redraw_block = block;
+-     while (r0)
+-     {
+- 	x = block[7] - block[1];
+- 	y = block[4] - block[10];
+- 	width  = block[9]  - block[7];
+- 	height = block[10] - block[8];
+- 
+- 	if (height + y > Rows * gui.char_height)
+- 	{
+- 	    /* Blank everything off the bottom. */
+- 	    plot_rectangle(96 + 5, blank_col,
+- 				0, block[8] - block[4],
+- 				block[9] - block[1], -FILL_Y(Rows) - 1);
+- 	    height = Rows * gui.char_height;
+- 	}
+- 	if (width + x> Columns * gui.char_width)
+- 	{
+- 	    /* Blank everything off to the right. */
+- 	    plot_rectangle(96 + 5, blank_col,
+- 				FILL_X(Columns), block[8] - block[4],
+- 				block[9] - block[1], 0);
+- 	    width = Columns * gui.char_width;
+- 	}
+- 	gui_redraw(x , y, width, height);
+- 	swi(Wimp_GetRectangle, 0, block);
+-     }
+-     redraw_block = NULL;
+- }
+- 
+- /* Check if we have modified data.
+-  * If we do then ack the message to stop the shutdown.
+-  * Otherwise, ignore the message.
+-  */
+-     void
+- ro_prequit(block)
+-     int	    *block;
+- {
+-     if (!ro_ok_to_quit())
+-     {
+- 	/* Not OK to quit - stop shutdown */
+- 	block[3] = block[2];
+- 	swi(Wimp_SendMessage, 19, block, block[1]);
+-     }
+-     /* Do nothing. We may get a Message_Quit later. */
+- }
+- 
+- /* If there is unsaved data then ask the user if they mind losing it.
+-  * Return TRUE if we can quit without saving, FALSE to halt the
+-  * shutdown.
+-  */
+-     int
+- ro_ok_to_quit()
+- {
+-     int	    old_confirm = cmdmod.confirm;
+- 
+-     cmdmod.confirm = FALSE;	    /* Use our own, single tasking, box */
+- 
+-     if (check_changed_any(FALSE))
+-     {
+- 	swi(Wimp_ReportError,
+- 		"\0\0\0\0Vim contains unsaved data - quit anyway?",
+- 		0x17,
+- 		"Vim");
+- 	cmdmod.confirm = old_confirm;
+- 	if (r1 != 1)
+- 	    return FALSE;
+-     }
+-     cmdmod.confirm = old_confirm;
+-     return TRUE;
+- }
+- 
+- /* Quit without checking for unsaved data. */
+-     void
+- ro_quit()
+- {
+-     exiting = TRUE;
+-     getout(0);
+- 
+-     exiting = FALSE;		    /* probably can't get here */
+-     setcursor();		    /* position cursor */
+-     out_flush();
+- }
+- 
+- /* Insent the given vim special code into the input buffer */
+-     void
+- ro_press(a, b, modifier)
+-     char a;
+-     char b;
+-     int modifier;	/* %<Ctrl><Shift> 0000 0000 */
+- {
+-     char_u buf[6];
+-     int	    vim_mod;
+-     int	    key;
+- 
+- 
+-     /* Convert RISC OS modifier to Vim modifier. */
+-     vim_mod = ((modifier & 0x10) ? MOD_MASK_SHIFT : 0)
+- 	       | ((modifier & 0x20) ? MOD_MASK_CTRL : 0);
+-     key = simplify_key(TERMCAP2KEY(a, b), &vim_mod);
+- 
+-     buf[3] = CSI;
+-     buf[4] = KEY2TERMCAP0(key);
+-     buf[5] = KEY2TERMCAP1(key);
+-     if (vim_mod)
+-     {
+- 	buf[0] = CSI;
+- 	buf[1] = KS_MODIFIER;
+- 	buf[2] = vim_mod;
+- 	add_to_input_buf(buf, 6);
+-     }
+-     else
+- 	add_to_input_buf(buf + 3, 3);
+- }
+- 
+- /* Take a wimp key code and insert the vim equivalent
+-  * into vim's input buffer.
+-  * CTRL-C also sets got_int.
+-  */
+-     void
+- ro_insert_key(code)
+-     char_u *code;		/* Wimp_ProcessKey code (4 bytes) */
+- {
+-     char a = code[0];
+-     char b = code[1];
+-     int base, modifier;
+- 
+-     if (a == 3 && ctrl_c_interrupts)
+- 	got_int = TRUE;
+- 
+-     /* Is it a normal key? */
+-     if (a > 31 && a < 127)
+-     {
+- 	add_to_input_buf(code, 1);
+- 	return;
+-     }
+- 
+-     /* We should pass any unrecognised keys on, but
+-      * for now just pass on F12 combinations.
+-      */
+-     switch (b)
+-     {
+- 	case 0:
+- 	    /* Home and Delete are the only special cases */
+- 	    switch (a)
+- 	    {
+- 		case 0x1e:
+- 		    ro_press('k','h', 0);	/* Home */
+- 		    return;
+- 		case 0x7f:
+- 		    ro_press('k','D', 0);	/* Delete */
+- 		    return;
+- 		case CSI:
+- 		    {
+- 			/* Turn CSI into K_CSI.  Untested! */
+- 			char_u string[3] = {CSI, KS_EXTRA, KE_CSI};
+- 
+- 			add_to_input_buf(string, 3);
+- 			return;
+- 		    }
+- 		default:
+- 		    add_to_input_buf(code, 1);
+- 		    return;
+- 	    }
+- 	case 1:
+- 	    if ((a & 0xcf) == 0xcc)
+- 	    {
+- 		/* F12 pressed - pass it on (quick hack) */
+- 		swi(Wimp_ProcessKey, a | 0x100);
+- 		return;
+- 	    }
+- 	    base = a & 0xcf;
+- 	    modifier = a & 0x30;
+- 	    switch (base)
+- 	    {
+- 		case 0x8a:	/* Tab */
+- 		    add_to_input_buf("\011", 1);
+- 		    return;
+- 		case 0x8b:	/* Copy (End) */
+- 		    return ro_press('@', '7', modifier);
+- 		case 0x8c:	/* Left */
+- 		    return ro_press('k', 'l', modifier);
+- 		case 0x8d:	/* Right */
+- 		    return ro_press('k', 'r', modifier);
+- 		case 0x8e:	/* Down */
+- 		    if (modifier & 0x10)
+- 			return ro_press('k', 'N', modifier ^ 0x10);
+- 		    else
+- 			return ro_press('k', 'd', modifier);
+- 		case 0x8f:	/* Up */
+- 		    if (modifier & 0x10)
+- 			return ro_press('k', 'P', modifier ^ 0x10);
+- 		    else
+- 			return ro_press('k', 'u', modifier);
+- 		case 0xca:	/* F10 */
+- 		    return ro_press('k', ';', modifier);
+- 		case 0xcb:	/* F11 */
+- 		    return ro_press('F', '1', modifier);
+- 		case 0xcd:	/* Insert */
+- 		    return ro_press('k', 'I', modifier);
+- 		default:
+- 		    if (base > 0x80 && base < 0x18a)
+- 		    {
+- 			/* One of the other function keys */
+- 			return ro_press('k', '0' + (base & 15), modifier);
+- 		    }
+- 	    }
+-     }
+- }
+- 
+- /* Process a mouse event. */
+-     void
+- ro_mouse(block)
+-     int *block;
+- {
+-     int x, y, button, vim_button;
+-     int modifiers = 0;
+-     int min_x, min_y;		/* Visible area of editor window */
+-     int max_x, max_y;
+- 
+-     if (block[3] != gui.window_handle || ro_dragging)
+- 	return;			/* Not our window or ignoring clicks*/
+- 
+-     x = block[0];		/* Click position - screen coords */
+-     y = block[1];
+-     button = block[2];
+- 
+-     block[0] = gui.window_handle;
+-     swi(Wimp_GetWindowState, 0, block);
+-     min_x = block[1];
+-     min_y = block[2];
+-     max_x = block[3];
+-     max_y = block[4];
+- 
+-     if (block[3] - x < gui.scrollbar_width)
+-     {
+- 	/* Click in that blank area under the scrollbars */
+- 
+- 	if (button & 0x444)
+- 	{
+- 	    int	    front_block[64];
+- 	    /* Dragging with Select - bring window to front first */
+- 	    front_block[0] = gui.window_handle;
+- 	    swi(Wimp_GetWindowState, 0, front_block);
+- 	    front_block[7] = -1;
+- 	    ro_open_main(front_block);
+- 	}
+- 
+- 	block[0] = gui.window_handle;
+- 	block[1] = 7;			/* Drag point */
+- 	block[2] = block[4] = 0;	/* Coords of point. */
+- 	block[3] = block[5] = 0;
+- 	drag_x_offset = max_x - x;
+- 	drag_y_offset = min_y - y;
+- 
+- 	/* Parent box. */
+- 	block[6] = min_x +
+- 			gui.scrollbar_width * 2 +
+- 			MIN_COLUMNS * gui.char_width;
+- 	block[7] = 0;
+- 	gui_mch_get_screen_dimensions(&block[8], &block[9]);
+- 	block[9] = max_y -
+- 			4 * gui.char_height -
+- 			gui.scrollbar_height;
+- 
+- 	swi(Wimp_DragBox, 0, block);
+- 	ro_dragging = DRAG_RESIZE_WINDOW;
+- 	drag_button = vim_button;
+- 	drag_modifiers = modifiers;
+- 	return;
+-     }
+- 
+-     if (button & 0x111)
+- 	vim_button = MOUSE_RIGHT;
+-     else if (button & 0x222)
+- 	vim_button = MOUSE_MIDDLE;
+-     else
+- 	vim_button = MOUSE_LEFT;
+- 
+-     swi(OS_Byte, 121, 0x80);
+-     if (r1 == 0xff)
+- 	modifiers |= MOUSE_SHIFT;
+-     swi(OS_Byte, 121, 0x81);
+-     if (r1 == 0xff)
+- 	modifiers |= MOUSE_CTRL;
+-     swi(OS_Byte, 121, 0x82);
+-     if (r1 == 0xff)
+- 	modifiers |= MOUSE_ALT;
+- 
+-     if (button == 2)
+-     {
+- 	/* Menu click:
+- 	 * If shift was pressed then do the paste action.
+- 	 * If not, then open the pop-up menu.
+- 	 */
+- 	modifiers ^= MOUSE_SHIFT;
+- 	if (modifiers && MOUSE_SHIFT)
+- 	{
+- 	    vimmenu_T	main;
+- 	    /* Shift was NOT pressed - show menu */
+- 	    main.dname = (char_u *) "Vim";
+- 	    main.children = root_menu;
+- 	    gui_mch_show_popupmenu(&main);
+- 	    return;
+- 	}
+-     }
+- 
+-     /* Gain the input focus */
+-     swi(Wimp_SetCaretPosition, gui.window_handle, -1, 0, 0, -1, -1);
+- 
+-     if (button & 0xf0)
+-     {
+- 	/* Drag operation:
+- 	 *
+- 	 * Tell the Wimp to start a drag.
+- 	 * Monitor null events.
+- 	 */
+- 	block[1] = 7;			/* Drag a point. */
+- 	block[2] = block[4] = x;	/* Coords of point. */
+- 	block[3] = block[5] = y;
+- 	block[6] = 0;			/* Coords of bounding box. */
+- 	block[7] = 0;
+- 	gui_mch_get_screen_dimensions(&block[8], &block[9]);
+- 
+- 	drag_x_offset = drag_y_offset = 0;
+- 
+- 	swi(Wimp_DragBox, 0, block);
+- 	ro_dragging = DRAG_SELECTION;
+- 	drag_button = vim_button;
+- 	drag_modifiers = modifiers;
+- 
+- 	vim_button |= MOUSE_DRAG;
+-     }
+- 
+-     gui_send_mouse_event(
+- 		vim_button,
+- 		x - min_x,
+- 		max_y - y,
+- 		button & 0xf ? TRUE : FALSE,	/* dclick */
+- 		modifiers);
+- }
+- 
+-     void
+- ro_continue_drag(block)
+-     int *block;			/* Just used as scrap. */
+- {
+-     int x, y;
+- 
+-     /* Get screen coords of pointer. */
+-     swi(Wimp_GetPointerInfo, 0, block);
+-     x = block[0] + drag_x_offset;
+-     y = block[1] + drag_y_offset;
+- 
+-     block[0] = gui.window_handle;
+-     swi(Wimp_GetWindowState, 0, block);
+- 
+-     if (ro_dragging == DRAG_RESIZE_WINDOW)
+-     {
+- 	/* Resizing the main window. */
+- 	block[2] = y;
+- 	block[3] = x;
+- 	ro_open_main(block);
+-     }
+-     else
+-     {
+- 	/* Selecting some text. */
+- 	gui_send_mouse_event(
+- 	    drag_button | MOUSE_DRAG,	/* Always report the same button */
+- 	    x - block[1],
+- 	    block[4] - y,
+- 	    FALSE,			/* Not a double click. */
+- 	    drag_modifiers);
+-     }
+- }
+- 
+- /* User has released all mouse buttons, marking the end of a drag. */
+-     void
+- ro_drag_finished(block)
+-     int *block;
+- {
+-     int x;
+-     int y;
+-     int width, height;
+- 
+-     /* I don't trust the box returned by Wimp_Poll; look at the pointer
+-      * ourselves.
+-      */
+-     swi(Wimp_GetPointerInfo, 0, block);
+-     x = block[0] + drag_x_offset;
+-     y = block[1] + drag_y_offset;
+- 
+-     if (ro_dragging == DRAG_RESIZE_WINDOW)
+-     {
+- 	block[0] = gui.window_handle;
+- 	swi(Wimp_GetWindowState, 0, block);
+- 	block[2] = y;
+- 	block[3] = x;
+- 	ro_open_main(block);
+- 
+- 	width = (block[3] - block[1]);
+- 	height = (block[4] - block[2]);
+- 
+- 	swi(Wimp_ForceRedraw, gui.window_handle, 0, -height, width, 0);
+- 	gui_resize_shell(width, height);
+-     }
+-     else
+-     {
+- 	block[0] = gui.window_handle;
+- 	swi(Wimp_GetWindowState, 0, block);
+- 	gui_send_mouse_event(
+- 		MOUSE_RELEASE,
+- 		x - block[1],
+- 		block[4] - y,
+- 		FALSE,			/* not a double click */
+- 		drag_modifiers);
+-     }
+-     ro_dragging = DRAG_FALSE;
+- }
+- 
+- /* Load the file/pathname given in block into a [new] buffer.
+-  *
+-  * Modifier	Action
+-  *
+-  * None		:confirm e <file>
+-  * Ctrl		:sp <file>
+-  * Shift	<file>
+-  *
+-  * Insert into typebuf, at the start.
+-  * If loading from !Scrap then use saved leafname instead, and
+-  * delete the scrap file. Also, ignore shift key.
+-  *
+-  * NB: Doesn't send DataLoadAck (other app might delete temp file?).
+-  */
+-     void
+- ro_dataload(block)
+-     int	    *block;
+- {
+-     char_u  new_path[MAXPATHL];
+-     char_u  *path = ((char_u *) block) + 44;
+-     int	    scrap = FALSE;
+- 
+-     if (block[3] == leaf_ref && leaf_name)
+- 	scrap = TRUE;
+- 
+-     switch (get_real_state() & 0xff)
+-     {
+- 	case INSERT:
+- 	case CMDLINE:
+- 	case CMDLINE+LANGMAP:
+- 	    /* For insert mode we can only insert the pathname (currently)
+- 	     * Make sure Shift is pressed.
+- 	     */
+- 	    swi(OS_Byte, 121, 0x80);	    /* Is Shift pressed? */
+- 	    if (r1 == 0xff)
+- 	    {
+- 		ins_typebuf(" ", REMAP_NONE, 0, TRUE, FALSE);
+- 		ins_typebuf(path, REMAP_NONE, 0, TRUE, FALSE);
+- 		ro_return_early = TRUE;		    /* Return even though nothing was typed. */
+- 	    }
+- 	    else
+- 		swi(Wimp_ReportError,
+- 			"\0\0\0\0Sorry, you can only load text in normal mode", 5, "Vim");
+- 	    break;
+- 
+- 	case NORMAL:
+- 	    ro_return_early = TRUE;	    /* Return even though nothing was typed. */
+- 
+- 	    if (scrap)			    /* Remove <Wimp$Scrap>. Later. */
+- 		ins_typebuf(":!~remove <Wimp$Scrap>\r", REMAP_NONE, 0, TRUE, FALSE);
+- 
+- 	    /* Insert {:sp ,:confirm e }[+f\ <leaf> ]<file><CR> */
+- 	    ins_typebuf("\r", REMAP_NONE, 0, TRUE, FALSE);
+- 	    ins_typebuf(path, REMAP_NONE, 0, TRUE, FALSE);
+- 	    ins_typebuf(" ", REMAP_NONE, 0, TRUE, FALSE);
+- 
+- 	    if (scrap)
+- 	    {
+- 		/* Loading via !Scrap - change pathname to stored leafname */
+- 		ins_typebuf(leaf_name, REMAP_NONE, 0, TRUE, FALSE);
+- 		ins_typebuf(" +f\\ ", REMAP_NONE, 0, TRUE, FALSE);
+- 		leaf_ref = 0;
+- 		vim_free(leaf_name);
+- 		leaf_name = NULL;
+- 	    }
+- 
+- 	    swi(OS_Byte, 121, 0x81);	    /* Is Ctrl pressed? */
+- 	    if (r1 == 0xff)
+- 		/* Yes, split window */
+- 		ins_typebuf(":sp", REMAP_NONE, 0, TRUE, FALSE);
+- 	    else
+- 		ins_typebuf(":confirm e", REMAP_NONE, 0, TRUE, FALSE);
+- 	    break;
+- 
+- 	default:
+- 	    swi(Wimp_ReportError, "\0\0\0\0You can only load text in normal mode.", 5, "Vim");
+-     }
+-     /* Send DataSaveAck so other program doesn't think we died
+-      * and delete <Wimp$Scrap>.
+-      */
+-     block[3] = block[2];
+-     block[4] = 4;
+-     swi(Wimp_SendMessage, 17, block, block[1]);
+- }
+- 
+-     void
+- ro_datasave(block)
+-     int	    *block;
+- {
+-     char_u *path = ((char_u *) block) + 44;
+- 
+-     /* Preserve the name given so we can use it, not <Wimp$Scrap> */
+-     if (leaf_name)
+- 	vim_free(leaf_name);
+-     leaf_name = vim_strsave(path);
+- 
+-     block[9] = -1;	    /* File is unsafe. */
+-     strcpy(path, "<Wimp$Scrap>");
+-     block[0] = 60;
+-     block[3] = block[2];
+-     block[4] = 2;
+-     swi(Wimp_SendMessage, 17, block, block[1]);
+- 
+-     leaf_ref = block[2];
+- }
+- 
+-     void
+- ro_message(block)
+-     int *block;
+- {
+-     char_u	*buffer;
+-     long_u	len;
+- 
+-     if (block[1] == task_handle)
+- 	return;			    /* Don't talk to ourself! */
+-     switch (block[4])
+-     {
+- 	case 0:		/* Quit. */
+- 	    if (block[4] == 0)
+- 		ro_quit();
+- 	    break;
+- 	case 1:	/* DataSave */
+- 	    ro_datasave(block);
+- 	    break;
+- 	case 2:		/* DataSaveAck. */
+- 	    if (clip_convert_selection(&buffer, &len, &clip_star) == -1)
+- 		return;
+- 
+- 	    /* Save the clipboard contents to a file. */
+- 	    swi(OS_File, 10, ((char_u *) block) + 44, 0xfff, 0, buffer, buffer + len);
+- 
+- 	    /* Ack with DataLoad message. */
+- 	    block[3] = block[2];
+- 	    block[4] = 3;
+- 	    block[9] = len;
+- 	    swi(Wimp_SendMessage, 17, block, block[1]);
+- 
+- 	    vim_free(buffer);
+- 	    break;
+- 	case 3:		/* DataLoad */
+- 	    ro_dataload(block);
+- 	    break;
+- 	case 8:		/* PreQuit */
+- 	    ro_prequit(block);
+- 	    break;
+- 	case 0xf:	/* Lose clipboard. */
+- 	    if (block[5] & 4)
+- 	    {
+- 		clip_free_selection(&clip_star);
+- 		clip_star.owned = FALSE;
+- 	    }
+- 	    break;
+- 	case 0x10:	/* DataRequest (clip_star) */
+- 	    if (clip_star.owned)
+- 	    {
+- 		int rows;
+- 
+- 		/* Tell other program that we have the clipboard. */
+- 		block[0] = 52;
+- 		block[3] = block[2];	    /* Copy myref to yourref. */
+- 		block[4] = 1;		    /* DataSave message. */
+- 		/* Create an estimate for the size (larger or same as true
+- 		 * value) */
+- 		rows = clip_star.end.lnum - clip_star.start.lnum;
+- 		if (rows < 0)
+- 		    rows = -rows;
+- 		block[9] = (rows + 1) * Columns + 1; /* Add one for possible
+- 							final newline. */
+- 		block[10] = 0xfff;	    /* Clipboard is text. */
+- 		strcpy( ((char_u *) block) + 44, "VimClip");
+- 		swi(Wimp_SendMessage, 17, block, block[1]);
+- 	    }
+- 	    break;
+- 	case 0x400c1:	/* Mode change */
+- 	    changed_mode = TRUE;		/* Flag - update on next OpenWindow */
+- 	    if (zap_redraw)
+- 	    {
+- 		/* JK230798, re-initialise ZapRedraw stuff */
+- 		if (ro_zap_redraw_initialise() == FAIL)
+- 		    zap_redraw = FALSE;
+- 	    }
+- 	    break;
+- 	case 0x400c3:	/* TaskCloseDown */
+- 	    if (block[1] == child_handle)
+- 		child_handle = 0;
+- 	    break;
+-     }
+- }
+- 
+- /*
+-  * Converts a scrollbar's window handle into a scrollbar pointer.
+-  * NULL on failure.
+-  */
+-     scrollbar_T *
+- ro_find_sbar(id)
+-     int		id;
+- {
+-     win_T	*wp;
+- 
+-     if (gui.bottom_sbar.id == id)
+- 	return &gui.bottom_sbar;
+-     FOR_ALL_WINDOWS(wp)
+-     {
+- 	if (wp->w_scrollbars[SBAR_LEFT].id == id)
+- 	    return &wp->w_scrollbars[SBAR_LEFT];
+- 	if (wp->w_scrollbars[SBAR_RIGHT].id == id)
+- 	    return &wp->w_scrollbars[SBAR_RIGHT];
+-     }
+-     return NULL;
+- }
+- 
+-     void
+- scroll_to(line, sb)
+-     int sb;	/* Scrollbar number */
+-     int line;
+- {
+-     char_u code[8];
+- 
+-     /* Don't put events in the input queue now. */
+-     if (hold_gui_events)
+- 	return;
+- 
+-     /* Send a scroll event:
+-      *
+-      * A scrollbar event is CSI (NOT K_SPECIAL), KS_VER_SCROLLBAR,
+-      * KE_FILLER followed by:
+-      * one byte representing the scrollbar number, and then four bytes
+-      * representing a long_u which is the new value of the scrollbar.
+-      */
+-     code[0] = CSI;
+-     code[1] = KS_VER_SCROLLBAR;
+-     code[2] = KE_FILLER;
+-     code[3] = sb;
+-     code[4] = line >> 24;
+-     code[5] = line >> 16;
+-     code[6] = line >> 8;
+-     code[7] = line;
+-     add_to_input_buf(code, 8);
+- }
+- 
+-     void
+- h_scroll_to(col)
+-     int col;
+- {
+-     char_u code[8];
+- 
+-     /* Don't put events in the input queue now. */
+-     if (hold_gui_events)
+- 	return;
+- 
+-     /* Send a scroll event:
+-      *
+-      * A scrollbar event is CSI (NOT K_SPECIAL)
+-      *
+-      * A horizontal scrollbar event is K_SPECIAL, KS_HOR_SCROLLBAR,
+-      * KE_FILLER followed by four bytes representing a long_u which is the
+-      * new value of the scrollbar.
+-      */
+-     code[0] = CSI;
+-     code[1] = KS_HOR_SCROLLBAR;
+-     code[2] = KE_FILLER;
+-     code[4] = col >> 24;
+-     code[5] = col >> 16;
+-     code[6] = col >> 8;
+-     code[7] = col;
+-     add_to_input_buf(code, 8);
+- }
+- 
+-     void
+- ro_scroll(block)
+-     int		*block;
+- {
+-     scrollbar_T	*sb;
+-     int		offset;
+-     win_T	*wp;
+- 
+-     /* Block is ready for Wimp_OpenWindow, and also contains:
+-      *
+-      * +32 = scroll X direction (-2 .. +2)
+-      * +36 = scroll Y direction (-2 .. +2)
+-      */
+- 
+-     sb = ro_find_sbar(block[0]);
+-     if (!sb)
+- 	return;		/* Window not found (error). */
+- 
+-     wp = sb-> wp;
+- 
+-     if (wp == NULL)
+-     {
+- 	/* Horizontal bar. */
+- 	offset = block[8];
+- 	if (offset == -2)
+- 	    offset = (block[1] - block[3]) / gui.char_width;
+- 	else if (offset == 2)
+- 	    offset = (block[3] - block[1]) / gui.char_width;
+- 
+- 	block[5] += offset * gui.char_width;
+- 
+- 	gui_drag_scrollbar(sb, block[5] / gui.char_width, FALSE);
+- 
+- 	swi(Wimp_OpenWindow, 0, block);
+-     }
+-     else
+-     {
+- 	offset = -block[9];
+- 	if (offset == -2)
+- 	    offset = -(wp -> w_height - 1);
+- 	else if (offset == 2)
+- 	    offset = wp -> w_height - 1;
+- 
+- 	/* Possibly we should reposition the scrollbar?
+- 	 * Vim seems to update the bar anyway...
+- 	 */
+- 	gui_drag_scrollbar(sb, offset - (block[6] / gui.char_height), FALSE);
+-     }
+- }
+- 
+- /* Move a window by a given offset. Used to simulate the function of the
+-  * nested wimp.
+-  */
+-     void
+- ro_move_child(window, x, y, pos_wanted, pos_got)
+-     int	window;
+-     int x,y;		/* offset to move by */
+-     int	pos_wanted, pos_got;
+- {
+-     int	block[10];
+- 
+-     block[0] = window;
+-     swi(Wimp_GetWindowState, 0, block);
+-     block[1] += x;
+-     block[2] += y;
+-     block[3] += x;
+-     block[4] += y;
+-     if (pos_wanted == -1)
+- 	block[7] = -1;
+-     else if (pos_wanted == -2)
+- 	block[7] = pos_got;
+-     swi(Wimp_OpenWindow, 0, block);
+- }
+- 
+- /* Open the main window. Also updates scrollbars if we are not
+-  * using the nested Wimp.
+-  * If we have just changed mode then re-read all values.
+-  */
+-     void
+- ro_open_main(block)
+-     int	    *block;
+- {
+-     int	    toggle_size;
+- 
+-     /* Find out if the user clicked on the toggle size icon. */
+-     block[20] = block[0];
+-     swi(Wimp_GetWindowState, 0, block + 20);
+-     toggle_size = block[28] & (1 << 19);
+- 
+-     if (nested_wimp)
+-     {
+- 	swi(Wimp_OpenWindow, 0, block);
+-     }
+-     else
+-     {
+- 	int	old[10];
+- 	int	x_offset, y_offset;	    /* Move children same as parent. */
+- 	int	pos_wanted, pos_got;
+- 	int	left_bar  = gui.which_scrollbars[SBAR_LEFT];
+- 	int	right_bar = gui.which_scrollbars[SBAR_RIGHT];
+- 	win_T	*wp;
+- 
+- 	/* Three cases to think about:
+- 	 * 1) Move to top. Open each window at the top.
+- 	 * 2) Same stack position. Open each with same position.
+- 	 * 3) Open at bottom. Open children with parent's new position.
+- 	 */
+- 
+- 	old[0] = block[0];
+- 	swi(Wimp_GetWindowState, 0, old);
+- 	pos_wanted = block[7];
+- 	swi(Wimp_OpenWindow, 0, block);
+- 	/* Block updated by OpenWindow? I don't think so! */
+- 	swi(Wimp_GetWindowState, 0, block);
+- 	pos_got = block[7];
+- 
+- 	x_offset = block[1] - old[1];
+- 	y_offset = block[4] - old[4];
+- 	if (x_offset || y_offset || pos_wanted == -1 || pos_wanted == -2)
+- 	{
+- 	    /* If parent has moved, re-open all the child windows. */
+- 	    FOR_ALL_WINDOWS(wp)
+- 	    {
+- 		/* Reopen scrollbars for this window. */
+- 		if (left_bar)
+- 		    ro_move_child(wp -> w_scrollbars[SBAR_LEFT].id,
+- 				x_offset, y_offset,
+- 				pos_wanted, pos_got);
+- 		if (right_bar)
+- 		    ro_move_child(wp -> w_scrollbars[SBAR_RIGHT].id,
+- 				x_offset, y_offset,
+- 				pos_wanted, pos_got);
+- 	    }
+- 	}
+-     }
+-     if (changed_mode || toggle_size)
+-     {
+- 	int	width, height;
+- 
+- 	if (changed_mode)
+- 	    ro_measure_tools();
+- 	block[0] = gui.window_handle;
+- 	swi(Wimp_GetWindowState, 0, block);
+- 
+- 	width = block[3] - block[1];
+- 	height = block[4] - block[2];
+- 	swi(Wimp_ForceRedraw, gui.window_handle, 0, -height, width, 0);
+- 	gui_resize_shell(width, height);
+- 	changed_mode = FALSE;
+-     }
+- }
+- 
+-     void
+- ro_open_window(block)
+-     int		*block;
+- {
+-     int		pos;
+-     scrollbar_T *sb;
+- 
+-     if (block[0] == gui.window_handle)
+- 	ro_open_main(block);
+-     else
+-     {
+- 	swi(Wimp_OpenWindow, 0, block);
+- 	if (block[0] != gui.window_handle)
+- 	{
+- 	    sb = ro_find_sbar(block[0]);
+- 	    if (sb)
+- 	    {
+- 		if (sb-> wp != NULL)
+- 		    gui_drag_scrollbar(sb, -block[6] / gui.char_height, FALSE);
+- 		else
+- 		    gui_drag_scrollbar(sb, block[5] / gui.char_width, FALSE);
+- 	    }
+- 	}
+-     }
+- }
+- 
+-     void
+- ro_menu_selection(block)
+-     int		*block;
+- {
+-     int		*item = wimp_menu + 7;
+-     vimmenu_T	*menu;
+-     /* wimp_menu points to a wimp menu structure */
+- 
+-     for (;;)
+-     {
+- 	while (block[0]--)
+- 	    item += 6;
+- 	if (block[1] == -1)
+- 	    break;
+- 	item = ((int *) item[1]) + 7;
+- 	block++;
+-     }
+-     /* item points to the wimp menu item structure chosen */
+-     menu = (vimmenu_T *) item[5];
+- 
+-     swi(Wimp_GetPointerInfo, 0, block);
+-     if (block[2] == 1)
+- 	/* Adjust used - keep menu open */
+- 	swi(Wimp_CreateMenu, 0, wimp_menu);
+- 
+-     if (menu-> cb)
+- 	menu-> cb(menu);
+- }
+- 
+-     void
+- ro_open_parent()
+- {
+-     int head;
+-     char_u *i = curbuf-> b_ffname;
+-     char_u  buffer[256];
+- 
+-     head = 0;
+-     for (; *i; i++)
+-     {
+- 	if (*i == '.')
+- 	    head = i - curbuf-> b_ffname;
+-     }
+- 
+-     /* Append head chars to buffer */
+-     if (head < 240 && curbuf-> b_ffname && head)
+-     {
+- 	strcpy(buffer, "%filer_opendir ");
+- 	strncpy(buffer + 15, curbuf-> b_ffname, head);
+- 	buffer[15 + head] = '\0';
+- 	swi(OS_CLI, buffer);
+-     }
+- }
+- 
+-     void
+- process_event(event, block)
+-     int event;
+-     int *block;
+- {
+-     switch (event)
+-     {
+- 	case 0:		/* Nothing - update drag state. */
+- 	    if (ro_dragging)
+- 		ro_continue_drag(block);
+- 	    break;
+- 	case 1:		/* Redraw window. */
+- 	    redraw_window(block);
+- 	    break;
+- 	case 2:		/* Open window. */
+- 	    ro_open_window(block);
+- 	    break;
+- 	case 3:		/* Close window. */
+- 	    swi(Wimp_GetPointerInfo, 0, block + 1);
+- 	    if (block[3] == 1)
+- 		ro_open_parent();
+- 	    else
+- 		if (ro_ok_to_quit())
+- 		    ro_quit();
+- 	    break;
+- 	case 6:		/* Mouse click. */
+- 	    ro_mouse(block);
+- 	    break;
+- 	case 7:		/* Finished drag. */
+- 	    ro_drag_finished(block);
+- 	    break;
+- 	case 8:		/* Key pressed. */
+- 	    ro_insert_key((char_u *) &block[6]);
+- 	    break;
+- 	case 9:
+- 	    ro_menu_selection(block);
+- 	    break;
+- 	case 10:	/* Scroll request. */
+- 	    ro_scroll(block);
+- 	    break;
+- 	case 11:	/* Lose caret. */
+- 	    if (block[0] == gui.window_handle)
+- 		gui_focus_change(FALSE);
+- 	    break;
+- 	case 12:	/* Gain caret. */
+- 	    if (block[0] == gui.window_handle)
+- 		gui_focus_change(TRUE);
+- 	    break;
+- 	case 17:	/* User message. */
+- 	case 18:	/* User message recorded. */
+- 	    ro_message(block);
+- 	    break;
+-     }
+- }
+- 
+- /*
+-  * GUI input routine called by gui_wait_for_chars().  Waits for a character
+-  * from the keyboard.
+-  *  wtime == -1	    Wait forever.
+-  *  wtime == 0	    This should never happen.
+-  *  wtime > 0	    Wait wtime milliseconds for a character.
+-  * Returns OK if a character was found to be available within the given time,
+-  * or FAIL otherwise.
+-  */
+-     int
+- gui_mch_wait_for_chars(long wtime)
+- {
+-     int block[64];
+-     int	reason;
+-     int start_time = -1;
+-     int ctime = wtime / 10;	/* delay in cs */
+- 
+-     if (wtime != -1)
+-     {
+- 	swi(OS_ReadMonotonicTime);
+- 	start_time = r0;
+-     }
+- 
+-     for (;;)
+-     {
+- 	if (ro_dragging)
+- 	    reason = wimp_poll(0, block);	/* Always return immediately */
+- 	else if (wtime == -1)
+- 	    reason = wimp_poll(1, block);
+- 	else
+- 	    reason = wimp_pollidle(0, block, start_time + ctime);
+- 
+- 	process_event(reason, block);
+- 
+- 	if (input_available() || ro_return_early)
+- 	{
+- 	    ro_return_early = FALSE;
+- 	    return OK;	    /* There is something to process (key / menu event) */
+- 	}
+- 
+- 	if (wtime != -1)
+- 	{
+- 	    swi(OS_ReadMonotonicTime);
+- 	    if (r0 - start_time > ctime)
+- 		return FAIL;	/* We've been waiting too long - return failure */
+- 	}
+-     }
+- }
+- 
+- /* Flush any output to the screen */
+-     void
+- gui_mch_flush(void)
+- {
+- }
+- 
+- /*
+-  * Clear a rectangular region of the screen from text pos(row1, col1) to
+-  * (row2, col2) inclusive.
+-  */
+-     void
+- gui_mch_clear_block(int row1, int col1, int row2, int col2)
+- {
+-     swi(ColourTrans_ReturnGCOL, gui.back_pixel << 8, 0, 0, 1<<7, 0);
+-     plot_rectangle(96 + 5, r0,
+- 			FILL_X(col1), -FILL_Y(row2 + 1),
+- 			FILL_X(col2 + 1), -FILL_Y(row1));
+- }
+- 
+-     void
+- gui_mch_clear_all(void)
+- {
+-     if (redraw_block)
+-     {
+- 	swi(ColourTrans_SetGCOL, gui.back_pixel << 8, 0, 0, 1<<7, 0);
+- 	swi(OS_WriteI + 16);
+-     }
+-     else
+-     {
+- 	int block[44];
+- 	block[0] = gui.window_handle;
+- 	block[1] = 0;
+- 	block[2] = -gui.num_rows * gui.char_height;
+- 	block[3] = gui.num_cols * gui.char_width;
+- 	block[4] = 0;
+- 	swi(Wimp_UpdateWindow, 0, block);
+- 	while (r0)
+- 	{
+- 	    swi(ColourTrans_SetGCOL, gui.back_pixel << 8, 0, 0, 1<<7, 0);
+- 	    swi(OS_WriteI + 16);
+- 	    swi(Wimp_GetRectangle, 0, block);
+- 	}
+-     }
+- }
+- 
+- /*
+-  * Delete the given number of lines from the given row, scrolling up any
+-  * text further down within the scroll region.
+-  */
+-     void
+- gui_mch_delete_lines(int row, int num_lines)
+- {
+-     int top_from = -row - num_lines;
+-     int bot_from = -gui.scroll_region_bot - 1;
+-     int bot_to   = bot_from + num_lines;
+- 
+-     swi(ColourTrans_SetGCOL, gui.back_pixel << 8, 0, 0, 0x80, 0);
+- 
+-     /* Changed without checking! */
+-     swi(Wimp_BlockCopy, gui.window_handle,
+- 			    gui.scroll_region_left * gui.char_width,
+- 			    bot_from * gui.char_height,
+- 			    (gui.scroll_region_right - gui.scroll_region_left
+- 							+ 1) * gui.char_width,
+- 			    top_from * gui.char_height,
+- 
+- 			    gui.scroll_region_left * gui.char_width,
+- 			    bot_to * gui.char_height);
+- 
+-     gui_clear_block(gui.scroll_region_bot - num_lines + 1,
+- 						       gui.scroll_region_left,
+- 	gui.scroll_region_bot, gui.scroll_region_right);
+- }
+- 
+- /*
+-  * Insert the given number of lines before the given row, scrolling down any
+-  * following text within the scroll region.
+-  */
+-     void
+- gui_mch_insert_lines(int row, int num_lines)
+- {
+-     int top_from = -row;
+-     int bot_to   = -gui.scroll_region_bot - 1;
+-     int bot_from = bot_to + num_lines;
+- 
+-     swi(ColourTrans_SetGCOL, gui.back_pixel << 8, 0, 0, 0x80, 0);
+- 
+-     swi(Wimp_BlockCopy, gui.window_handle,
+- 			    gui.scroll_region_left * gui.char_width,
+- 			    bot_from * gui.char_height,
+- 			    (gui.scroll_region_right - gui.scroll_region_left
+- 							+ 1) * gui.char_width,
+- 			    top_from * gui.char_height,
+- 
+- 			    gui.scroll_region_left * gui.char_width,
+- 			    bot_to * gui.char_height);
+- 
+-     gui_clear_block(row, gui.scroll_region_left,
+- 				row + num_lines - 1, gui.scroll_region_right);
+- }
+- 
+- /* Put selection in clipboard buffer.
+-  * Should we become the new owner?
+-  */
+-     void
+- clip_mch_request_selection(VimClipboard *cbd)
+- {
+-     int		block[64];	/* Will be used in Wimp_Poll. */
+-     int		reason;
+-     char_u	*buffer;
+-     long_u	length;
+- 
+-     block[0] = 48;			/* Size of block. */
+-     block[3] = 0;			/* Original message. */
+-     block[4] = 0x10;			/* Data request. */
+-     block[5] = gui.window_handle;
+-     block[6] = RO_LOAD_CLIPBOARD;	/* Internal handle. */
+-     block[7] = block[8] = 0;		/* (x,y) not used. */
+-     block[9] = 4;
+-     block[10] = 0xfff;	    /* We want text files if possible, I think. */
+-     block[11] = -1;	    /* End of list. */
+-     swi(Wimp_SendMessage, 17, block, 0);    /* Broadcast request. */
+- 
+-     /* OK, we've sent the request. Poll until we get a null poll (failure) or
+-      * we load the clipboard.
+-      * If we receive a DataSave event with icon handle = -2 then put it on the
+-      * clipboard. RISC OS should ensure that key events will not be delivered
+-      * until the clipboard operation completes (unless the owner starts idling
+-      * - we can't wait forever!).
+-      */
+-     for (;;)
+-     {
+- 	reason = wimp_poll(0, block);
+- 	if (reason == 0)
+- 	    return;	    /* Failed to get clipboard. */
+- 	if ((reason == 17 || reason == 18) &&
+- 		block[4] == 1 && block[6] == RO_LOAD_CLIPBOARD)
+- 	    break;	    /* Got it - stop waiting. */
+- 	process_event(reason, block);
+- 	if (ro_return_early)
+- 	    return;
+-     }
+-     /* Tell owner to save data in <Wimp$Scrap>. */
+-     block[0] = 60;
+-     block[3] = block[2];   /* Copy myref -> yourref */
+-     block[4] = 2;	    /* DataSaveAck. */
+-     block[9] = -1;	    /* Data is unsafe. */
+-     strcpy( ((char_u *) block) + 44, "<Wimp$Scrap>");
+-     swi(Wimp_SendMessage, 17, block, block[1]);
+- 
+-     /* Wait again for reply. */
+-     for (;;)
+-     {
+- 	reason = wimp_poll(0, block);
+- 	if (reason == 0)
+- 	    return;	/* Other program has given up! */
+- 	if ((reason == 17 || reason == 18) && block[4] == 3 && block[6] == RO_LOAD_CLIPBOARD)
+- 	    break;	/* Clipboard data saved to <Wimp$Scrap> */
+- 	process_event(reason, block);
+- 	if (ro_return_early)
+- 	    return;
+-     }
+- 
+-     /* <Wimp$Scrap> contains clipboard - load it. */
+-     if (xswi(OS_File, 17, "<Wimp$Scrap>") & v_flag)
+- 	return;		/* Error! */
+-     if (r0 != 1 && r0 != 3)
+- 	return;
+-     length = r4;
+- 
+-     buffer = lalloc(length, TRUE);  /* Claim memory (and report errors). */
+-     if (buffer == NULL)
+- 	return;
+- 
+-     if (xswi(OS_File, 16, "<Wimp$Scrap>", buffer, 0) & v_flag)
+- 	return;
+- 
+-     clip_yank_selection(MCHAR, buffer, length, cbd);
+- 
+-     vim_free(buffer);
+- 
+-     swi(OS_FSControl, 27, "<Wimp$Scrap>", 0, 0);    /* Delete temp file. */
+- 
+-     block[4] = 4;		    /* Send DataLoadAck. */
+-     block[3] = block[2];	    /* Copy myref -> yourref. */
+-     swi(Wimp_SendMessage, 17, block, block[1]);
+- }
+- 
+- /* Not sure what this means under RISC OS. */
+-     void
+- clip_mch_lose_selection(VimClipboard *cbd)
+- {
+- }
+- 
+- /* Tell everyone that we now own the clipboard.
+-  * Return OK if our claim is accepted (always, under RISC OS)
+-  */
+-     int
+- clip_mch_own_selection(VimClipboard *cbd)
+- {
+-     int block[6];
+-     block[0] = 24;	/* Length of block.  */
+-     block[3] = 0;	/* Original message. */
+-     block[4] = 0xf;	/* ClaimEntity. */
+-     block[5] = 0x4;	/* Claim clipboard only. */
+-     swi(Wimp_SendMessage, 17, block, 0);
+-     return OK;
+- }
+- 
+- /*
+-  * Send the current selection to the clipboard.  Do nothing for X because we
+-  * will fill in the selection only when requested by another app. Sounds good
+-  * for RISC OS too.
+-  */
+-     void
+- clip_mch_set_selection(VimClipboard *cbd)
+- {
+-     clip_get_selection(cbd);
+- }
+- 
+- /*
+-  * Make a menu either grey or not grey.
+-  */
+-     void
+- gui_mch_menu_grey(vimmenu_T *menu, int grey)
+- {
+-     menu-> greyed_out = grey;
+- }
+- 
+- /*
+-  * Make menu item hidden or not hidden
+-  */
+-     void
+- gui_mch_menu_hidden(vimmenu_T *menu, int hidden)
+- {
+-     menu-> hidden = hidden;
+- }
+- 
+- /*
+-  * This is called after setting all the menus to grey/hidden or not.
+-  */
+-     void
+- gui_mch_draw_menubar(void)
+- {
+-     swi(Wimp_CreateMenu, 0, -1);
+-     if (wimp_menu != (int *) -1)
+-     {
+- 	ro_remove_menu(wimp_menu);
+- 	wimp_menu = (int *) -1;
+-     }
+- }
+- 
+- /* Add or remove a scrollbar. Note that this is only called when
+-  * the scrollbar state is changing.
+-  * The scroll bar window has already been created.
+-  * We can't do anything except remove the scroll bar
+-  * until we know what size to use.
+-  */
+-     void
+- gui_mch_enable_scrollbar(sb, flag)
+-     scrollbar_T	*sb;
+-     int		flag;
+- {
+-     if (!flag)
+- 	swi(Wimp_CloseWindow, 0, & (sb->id) );
+-     return;
+- }
+- 
+-     void
+- gui_mch_set_blinking(long waittime, long on, long off)
+- {
+- }
+- 
+- /*
+-  * Stop the cursor blinking.  Show the cursor if it wasn't shown.
+-  */
+-     void
+- gui_mch_stop_blink(void)
+- {
+- }
+- 
+- /*
+-  * Start the cursor blinking.  If it was already blinking, this restarts the
+-  * waiting time and shows the cursor.
+-  */
+-     void
+- gui_mch_start_blink(void)
+- {
+- }
+- 
+- /*
+-  * Return the RGB value of a pixel as a long.
+-  */
+-     long_u
+- gui_mch_get_rgb(guicolor_T pixel)
+- {
+-     return (long_u)pixel;
+- }
+- 
+-     void
+- gui_mch_set_text_area_pos(int x, int y, int w, int h)
+- {
+- }
+- 
+-     void
+- gui_mch_enable_menu(int flag)
+- {
+- }
+- 
+-     void
+- gui_mch_set_menu_pos(int x, int y, int w, int h)
+- {
+- }
+- 
+-     void
+- gui_mch_add_menu(vimmenu_T *menu, int idx)
+- {
+- }
+- 
+-     void
+- gui_mch_add_menu_item(vimmenu_T *menu, int idx)
+- {
+- }
+- 
+-     void
+- gui_mch_new_menu_colors(void)
+- {
+- }
+- 
+-     void
+- gui_mch_destroy_menu(vimmenu_T *menu)
+- {
+- }
+- 
+- /* Size of buffer has changed.
+-  * Add one to max since gui.c subtracts one more than it should!
+-  */
+-     void
+- gui_mch_set_scrollbar_thumb(sb, val, size, max)
+-     scrollbar_T	*sb;
+-     long	val;
+-     long	size;
+-     long	max;
+- {
+-     int		block[10], width, height;
+- 
+-     width = (max + 1) * gui.char_width;
+-     height = (max + 1 + W_STATUS_HEIGHT(sb->wp)) * gui.char_height;
+- 
+-     block[0] = block[3] = 0;
+-     block[1] = -height + (1 << y_eigen_factor);
+-     block[2] = width;
+- 
+-     swi(Wimp_SetExtent, sb -> id, block);
+- 
+-     block[0] = sb -> id;
+-     swi(Wimp_GetWindowState, 0, block);
+-     block[5] = val * gui.char_width;
+-     block[6] = -val * gui.char_height;
+-     swi(Wimp_OpenWindow, 0, block, 0x4b534154,
+- 			gui.window_handle,	/* Parent window handle. */
+- 			(CHILD_FIX_TO_RIGHT  << CHILD_LEFT  )   |
+- 			(CHILD_FIX_TO_RIGHT  << CHILD_RIGHT )   |
+- 			(CHILD_FIX_TO_BOTTOM << CHILD_TOP   )   |
+- 			(CHILD_FIX_TO_BOTTOM << CHILD_BOTTOM)   |
+- 			(CHILD_SELF_SCROLL   << CHILD_SCROLL_X) |
+- 			(CHILD_SELF_SCROLL   << CHILD_SCROLL_Y)
+- 			);
+- }
+- 
+- /* Set the position of the scrollbar within the editor
+-  * window. Note that, for vertical scrollbars, x and w
+-  * are ignored. For horizontal bars y and h are ignored.
+-  */
+-     void
+- gui_mch_set_scrollbar_pos(sb, x, y, w, h)
+-     scrollbar_T *sb;
+-     int		x;		/* Horizontal sb position */
+-     int		y;		/* Top of scroll bar */
+-     int		w;		/* Width */
+-     int		h;		/* Height */
+- {
+-     int		block[24];
+-     int		px1, py1;	/* Parent window min coords */
+-     int		px2, py2;	/* Parent window max coords */
+- 
+-     /* Find where the parent window is. */
+-     block[0] = gui.window_handle;
+-     swi(Wimp_GetWindowState, 0, block);
+-     px1 = block[1];
+-     py1 = block[2];
+-     px2 = block[3];
+-     py2 = block[4];
+- 
+-     block[0] = sb -> id;
+- 
+-     /* Find out how big the scroll window is at the moment. */
+-     swi(Wimp_GetWindowInfo, 0, ((char_u *)block) + 1);
+- 
+-     if (block[13] < w || block[12] > -h)
+-     {
+- 	/* Current window is too small! */
+- 	if (block[12] > -h)
+- 	    block[12] = -h;
+- 	if (block[13] < w)
+- 	    block[13] = w;
+- 	swi(Wimp_SetExtent, block[0], block + 11);
+-     }
+- 
+-     /* This works better on the nested_wimp. */
+-     if (sb-> wp)
+-     {
+- 	/* This is a vertical scrollbar. */
+- 	block[1] = block[3] = px2 - gui.scrollbar_width + (1 << x_eigen_factor);
+- 	block[2] = 1 + py2 - (y + h) + (1 << y_eigen_factor);
+- 	block[4] = 1 + py2 - y;
+-     }
+-     else
+-     {
+- 	/* This is a horizontal scrollbar. */
+- 	block[2] = block[4] = py1 + gui.scrollbar_height;
+- 	block[1] = px1;
+- 	block[3] = px2 - gui.scrollbar_width;
+-     }
+- 
+-     block[5] = 0;
+-     block[6] = 0;
+-     block[7] = -1;
+- 
+-     swi(Wimp_OpenWindow, 0, block, 0x4b534154,
+- 	    gui.window_handle,	/* Parent window handle. */
+- 	    (CHILD_FIX_TO_RIGHT  << CHILD_LEFT  )   |
+- 	    (CHILD_FIX_TO_RIGHT  << CHILD_RIGHT )   |
+- 	    (CHILD_FIX_TO_BOTTOM << CHILD_TOP   )   |
+- 	    (CHILD_FIX_TO_BOTTOM << CHILD_BOTTOM)   |
+- 	    (CHILD_SELF_SCROLL   << CHILD_SCROLL_X) |
+- 	    (CHILD_SELF_SCROLL   << CHILD_SCROLL_Y)
+-        );
+- }
+- 
+- /* Create a window with no workarea to place inside editor window.
+-  * (what happens without the nested wimp?)
+-  * Data for scrollbar is invalid.
+-  */
+-     void
+- gui_mch_create_scrollbar(sb, orient)
+-     scrollbar_T *sb;
+-     int		orient;	/* orient is SBAR_HORIZ or SBAR_VERT */
+- {
+-     int bar[] =
+- 	{
+- 	    0,   0,		/* Visible area : min X,Y */
+- 	    100, 100,		/*		  max X,Y */
+- 	    0,   0,		/* Scroll offsets */
+- 	    -1,			/* Window in front */
+- 	    0x80800150 | (orient == SBAR_HORIZ ? (1 << 30) : (1 << 28)),
+- 	    0xff070207,		/* Colours */
+- 	    0x000c0103,		/* More colours */
+- 	    0, -0x4000,		/* Workarea extent */
+- 	    0x4000, 0,		/* max X,Y */
+- 	    0x00000000,		/* No title */
+- 	    0 << 12,		/* No workarea button type */
+- 	    1,			/* Wimp sprite area */
+- 	    0x00010001,		/* Minimum width, height */
+- 	    0, 0, 0,		/* Title data (none) */
+- 	    0			/* No icons */
+- 	};
+-     swi(Wimp_CreateWindow, 0, bar);
+-     sb -> id = r0;
+- }
+- 
+- #if defined(FEAT_WINDOWS) || defined(PROTO)
+-     void
+- gui_mch_destroy_scrollbar(scrollbar_T *sb)
+- {
+-     swi(Wimp_DeleteWindow, 0, & (sb->id));
+-     sb -> id = -1;
+- }
+- #endif
+- 
+-     void
+- gui_mch_set_scrollbar_colors(scrollbar_T *sb)
+- {
+-     /* Always use default RO colour scheme. */
+- }
+- 
+- /*
+-  * Get current mouse coordinates in text window.
+-  * Note: (0,0) is the bottom left corner, positive y is UP.
+-  */
+-     void
+- gui_mch_getmouse(x, y)
+-     int *x;
+-     int *y;
+- {
+-     int left;
+-     int top;
+-     int block[10];
+- 
+-     block[0] = gui.window_handle;
+-     swi(Wimp_GetWindowState, 0, block);
+-     left = block[1];
+-     top = block[4];
+- 
+-     swi(Wimp_GetPointerInfo, 0, block);
+-     *x = block[0] - left;
+-     *y = top - block[1];
+- }
+- 
+- /* MouseTo(x, y) */
+-     void
+- gui_mch_setmouse(x, y)
+-     int		x;
+-     int		y;
+- {
+- }
+- 
+-     void
+- gui_mch_toggle_tearoffs(enable)
+-     int		enable;
+- {
+-     /* no tearoff menus */
+- }
+- 
+- /* Redraw a window's title.
+-  * For the nested wimp we use the new 'redraw-title-bar' reason code.
+-  * For older wimps we mark the area of the screen where the title bar
+-  * is as invalid.
+-  */
+-     void
+- ro_redraw_title(window)
+-     int window;
+- {
+-     if (nested_wimp)
+-     {
+- 	swi(Wimp_ForceRedraw, window, 0x4b534154, 3);
+-     }
+-     else
+-     {
+- 	int block[10];
+- 	int miny;
+- 
+- 	block[0] = window;
+- 	swi(Wimp_GetWindowState, 0, block);
+- 	miny = block[4];
+- 	swi(Wimp_GetWindowOutline, 0, block);
+- 	swi(Wimp_ForceRedraw, -1,
+- 			block[1], miny,
+- 			block[3], block[4]);
+-     }
+- }
+- 
+- /* Turn a vimmenu_T structure into a wimp menu structure.
+-  * -1 if resulting menu is empty.
+-  * Only the children and dname items in the root menu are used.
+-  */
+-     int *
+- ro_build_menu(menu)
+-     vimmenu_T	*menu;
+- {
+-     int		*wimp_menu;
+-     int		width = 4;
+-     int		w;
+-     int		size = 28;
+-     vimmenu_T	*item;
+-     int		*wimp_item;
+- 
+-     /* Find out how big the menu is so we can allocate memory for it */
+-     for (item = menu-> children; item; item = item-> next)
+-     {
+- 	if (item-> hidden == FALSE && !menu_is_separator(item->name))
+- 	    size += 24;
+-     }
+- 
+-     if (size <= 28)
+- 	return (int *) -1;		/* No children - shouldn't happen */
+- 
+-     wimp_menu = (int *) alloc(size);
+- 
+-     wimp_menu[0] = (int) menu-> dname;
+-     wimp_menu[1] = -1;
+-     wimp_menu[2] = 0;
+-     wimp_menu[3] = 0x00070207;
+-     wimp_menu[5] = 44;
+-     wimp_menu[6] = 0;
+- 
+-     wimp_item = wimp_menu + 7;
+- 
+-     for (item = menu-> children; item; item = item-> next)
+-     {
+- 	if (menu_is_separator(item-> name))
+- 	{
+- 	    /* This menu entry is actually a separator. If it is not the first
+- 	     * menu entry then mark the previous menu item as needing a dotted
+- 	     * line after it.
+- 	     */
+- 	    if (wimp_item > wimp_menu + 7)
+- 		wimp_item[-6] |= 0x2;
+- 	}
+- 	else if (item-> hidden == FALSE)
+- 	{
+- 	    wimp_item[0] = 0;
+- 	    wimp_item[1] = item-> children ? (int) ro_build_menu(item) : -1;
+- 	    wimp_item[2] = 0x07009131 | (item-> greyed_out << 22);
+- 	    wimp_item[3] = (int) item-> dname;
+- 	    wimp_item[4] = -1;
+- 	    wimp_item[5] = (int) item;  /* Stuff the menu address in this unused space */
+- 
+- 	    w = strlen(item-> dname) + 1;
+- 	    if (w > width)
+- 		width = w;
+- 	    wimp_item += 6;
+- 	}
+-     }
+- 
+-     wimp_menu[4] = (width + 2) * 16;
+-     wimp_menu[7]  |= 0x100;	    /* Menu title is indirected */
+-     wimp_item[-6] |= 0x080;	    /* Last entry in menu */
+-     return wimp_menu;
+- }
+- 
+-     static void
+- ro_remove_menu(menu)
+-     int	    *menu;
+- {
+-     int	    *item = menu + 7;
+- 
+-     if (menu == NULL || menu == (int *) -1)
+- 	return;
+- 
+-     for (;;)
+-     {
+- 	if (item[1] != -1)
+- 	    ro_remove_menu((int *) item[1]);	/* Remove sub-menu */
+- 	if (item[0] & 0x80)
+- 	    break;			/* This was the last entry */
+- 	item += 6;
+-     }
+-     vim_free(menu);
+- }
+- 
+-     void
+- gui_mch_show_popupmenu(menu)
+-     vimmenu_T	*menu;
+- {
+-     int		block[10];
+- 
+-     /* Remove the existing menu, if any */
+-     if (wimp_menu != (int *) -1)
+-     {
+- 	swi(Wimp_CreateMenu, 0, -1);
+- 	ro_remove_menu(wimp_menu);
+- 	wimp_menu = (int *) -1;
+-     }
+- 
+-     wimp_menu = ro_build_menu(menu);
+-     if (wimp_menu != (int *) -1)
+-     {
+- 	swi(Wimp_GetPointerInfo, 0, block);
+- 	swi(Wimp_CreateMenu, 0, wimp_menu, block[0] - 64, block[1] + 64);
+-     }
+- }
+- 
+- /* Run a command using the TaskWindow module.
+-  * If SHELL_FILTER is set then output is not echoed to the screen,
+-  * If it is not set, then \r is not sent to the output file.
+-  */
+-     int
+- gui_mch_call_shell(cmd, options)
+-     char_u  *cmd;
+-     int	    options;	/* SHELL_FILTER if called by do_filter() */
+- 			/* SHELL_COOKED if term needs cooked mode */
+- {
+-     char_u  task_cmd[256];	/* Contains *TaskWindow command. */
+-     int	    block[64];
+-     int	    reason;
+-     char_u  *out;
+-     char_u  c;
+-     int	    old_msg_col;
+-     char_u  *out_redir;
+-     int	    length;
+-     FILE    *out_file = NULL;
+- 
+-     out_redir = strstr(cmd, " > ");
+-     if (out_redir == NULL)
+- 	length = strlen(cmd);	/* No redirection. */
+-     else
+-     {
+- 	length = out_redir - cmd;
+- 	out_file = fopen(out_redir + 3, "wb");
+- 	if (out_file == NULL)
+- 	    smsg("WARNING : Can't open file %s for writing\n", out_redir + 3);
+-     }
+- 
+-     if (length > 180)
+-     {
+- 	if (out_file)
+- 	    fclose(out_file);
+- 	return FAIL;		/* Command too long. */
+-     }
+- 
+-     strcpy(task_cmd, "TaskWindow \"");
+-     strncpy(task_cmd + 12, cmd, length);
+-     sprintf(task_cmd + 12 + length,
+- 	    "\" -task &%08x -ctrl -quit -name \"Vim command\"",
+- 	    task_handle);
+- 
+-     if (options & SHELL_COOKED)
+- 	settmode(TMODE_COOK);
+- 
+-     if (xswi(Wimp_StartTask, task_cmd) & v_flag)
+-     {
+- 	/* Failed to even start a new task (out of memory?) */
+- 	settmode(TMODE_RAW);
+- 	if (out_file)
+- 	    fclose(out_file);
+- 	return FAIL;
+-     }
+- 
+-     /* Wait for the child process to initialise. */
+-     child_handle = 0;
+-     while (!child_handle)
+-     {
+- 	reason = wimp_poll(0, block);
+- 	if ((reason == 17 || reason == 18) && block[4] == 0x808c2)
+- 	    child_handle = block[1];
+- 	else
+- 	    process_event(reason, block);
+-     }
+- 
+-     /* Block until finished */
+-     while (child_handle)
+-     {
+- 	reason = wimp_poll(1, block);
+- 	if (reason == 3 || (reason == 8 && block[6] == 3))
+- 	{
+- 	    /* Close window request or CTRL-C - kill child task. */
+- 	    block[0] = 20;
+- 	    block[3] = 0;
+- 	    block[4] = 0x808c4;	    /* Morite */
+- 	    swi(Wimp_SendMessage, 17, block, child_handle);
+- 	    MSG_PUTS(_("\nSending message to terminate child process.\n"));
+- 	    continue;
+- 	}
+- 	else if (reason == 8)
+- 	{
+- 	    block[0] = 28;
+- 	    block[3] = 0;
+- 	    block[4] = 0x808c0;	    /* Input */
+- 	    block[5] = 1;
+- 	    /* Block[6] is OK as it is! */
+- 	    swi(Wimp_SendMessage, 17, block, child_handle);
+- 	    continue;
+- 	}
+- 	else if (reason == 17 || reason == 18)
+- 	{
+- 	    if (block[4] == 0x808c1)
+- 	    {
+- 		/* Ack message. */
+- 		block[3] = block[2];
+- 		swi(Wimp_SendMessage, 19, block, block[1]);
+- 		out = (char_u *)block + 24;
+- 		old_msg_col = msg_col;
+- 		while (block[5]--)
+- 		{
+- 		    c = *out++;
+- 		    if (out_file && (c != '\r' || (options & SHELL_FILTER)))
+- 			fputc(c, out_file);
+- 		    if ((options & SHELL_FILTER) == 0)
+- 		    {
+- 			if (c == 127)
+- 			    msg_puts("\b \b");
+- 			else if (c > 31)
+- 			    msg_putchar(c);
+- 			else if (c == 10)
+- 			{
+- 			    lines_left = 8;	/* Don't do More prompt! */
+- 			    msg_putchar(10);
+- 			}
+- 		    }
+- 		}
+- 		/* Flush output to the screen. */
+- 		windgoto(msg_row, msg_col);
+- 		out_flush();
+- 		continue;
+- 	    }
+- 	}
+- 	process_event(reason, block);
+-     }
+-     msg_putchar('\n');
+-     settmode(TMODE_RAW);
+-     if (out_file)
+- 	fclose(out_file);
+-     return OK;
+- }
+- 
+- /* Like strsave(), but stops at any control char */
+-     char_u *
+- wimp_strsave(str)
+-     char    *str;
+- {
+-     int	    strlen = 0;
+-     char_u  *retval;
+-     while (str[strlen] > 31)
+- 	strlen++;
+-     retval = alloc(strlen + 1);
+-     if (retval)
+-     {
+- 	memcpy(retval, str, strlen);
+- 	retval[strlen] = '\0';
+-     }
+-     return retval;
+- }
+- 
+- /* If we are saving then pop up a standard RISC OS save box.
+-  * Otherwise, open a directory viewer on the given directory (and return NULL)
+-  * The string we return will be freed later.
+-  */
+-     char_u *
+- gui_mch_browse(saving, title, dflt, ext, initdir, filter)
+-     int		saving;		/* write action */
+-     char_u	*title;		/* title for the window */
+-     char_u	*dflt;		/* default file name */
+-     char_u	*ext;		/* extension added */
+-     char_u	*initdir;	/* initial directory, NULL for current dir */
+-     char_u	*filter;	/* file name filter */
+- {
+-     char command[256];
+-     int length;
+- 
+-     if (saving)
+-     {
+- 	int	block[64];
+- 	int	reason;
+- 	int	done_save = FALSE;
+- 	char_u	*retval = NULL;
+- 	char_u  *sprname;
+- 	char_u	*fname;
+- 	int	dragging_icon = FALSE;
+- 	int	filetype;
+- 
+- 	if (!dflt)
+- 	    dflt = "TextFile";
+- 
+- 	block[0] = save_window;
+- 	block[1] = 0;
+- 	swi(Wimp_GetIconState, 0, block);
+- 	sprname = ((char_u *) block[7]);
+- 	block[1] = 1;
+- 	swi(Wimp_GetIconState, 0, block);
+- 	fname = ((char *) block[7]);
+- 	strncpy(fname, dflt, 255);
+- 
+- 	if (xswi(OS_FSControl, 31, curbuf->b_p_oft) & v_flag)
+- 	{
+- 	    filetype = 0xfff;
+- 	    strcpy(sprname + 5, "xxx");
+- 	}
+- 	else
+- 	{
+- 	    filetype = r2;
+- 	    sprintf(sprname + 5, "%03x", filetype);
+- 	}
+- 
+- 	/* Open the save box */
+- 
+- 	swi(Wimp_GetPointerInfo, 0, block);
+- 	swi(Wimp_CreateMenu, 0, save_window, block[0] - 64, block[1] + 64);
+- 	swi(Wimp_SetCaretPosition, save_window, 1, 0, 0, -1, -1);
+- 
+- 	while (!done_save)
+- 	{
+- 	    reason = wimp_poll(1, block);
+- 	    switch (reason)
+- 	    {
+- 		case 1:
+- 		    redraw_window(block);
+- 		    break;
+- 		case 2:
+- 		    if (block[0] == save_window)
+- 			swi(Wimp_OpenWindow, 0, block);
+- 		    else
+- 			ro_open_window(block);
+- 		    break;
+- 		case 3:
+- 		    done_save = TRUE;
+- 		    break;
+- 		case 6:
+- 		    if (block[3] != save_window)
+- 			done_save = TRUE;
+- 		    else
+- 		    {
+- 			int drag_box[4];
+- 			int min_x, max_y;
+- 
+- 			switch (block[4])
+- 			{
+- 			    case    0: /* Start drag */
+- 				block[0] = save_window;
+- 				swi(Wimp_GetWindowState, 0, block);
+- 				min_x = block[1];
+- 				max_y = block[4];
+- 				block[1] = 0;
+- 				swi(Wimp_GetIconState, 0, block);
+- 				drag_box[0] = block[2] + min_x;
+- 				drag_box[1] = block[3] + max_y;
+- 				drag_box[2] = block[4] + min_x;
+- 				drag_box[3] = block[5] + max_y;
+- 
+- 				swi(DragASprite_Start,
+- 					0x45,
+- 					1,
+- 					sprname,
+- 					drag_box);
+- 				dragging_icon = TRUE;
+- 				break;
+- 			    case    2: /* OK */
+- 				retval = wimp_strsave(fname);
+- 				done_save = TRUE;
+- 				break;
+- 			    case    3: /* Cancel */
+- 				done_save = TRUE;
+- 				break;
+- 			}
+- 		    }
+- 		    break;
+- 		case 7:
+- 		    if (dragging_icon)
+- 		    {
+- 			int len = 0;
+- 
+- 			dragging_icon = FALSE;
+- 			swi(Wimp_GetPointerInfo, 0, block);
+- 			block[5] = block[3];
+- 			block[6] = block[4];
+- 			block[7] = block[0];
+- 			block[8] = block[1];
+- 			block[9] = 0;		/* Don't know the size */
+- 			block[10] = filetype;
+- 
+- 			while (fname[len] > 31)
+- 			{
+- 			    if (fname[len] == '.')
+- 			    {
+- 				fname += len + 1;
+- 				len = 0;
+- 			    }
+- 			    else
+- 				len++;
+- 			}
+- 			if (len > 211)
+- 			    len = 211;
+- 
+- 			memcpy(((char_u *) block) + 44, fname, len);
+- 			((char_u *)block)[44 + len] = '\0';
+- 
+- 			block[0] = (len + 48) & 0xfc;
+- 			block[3] = 0;
+- 			block[4] = 1;	    /* DataSave */
+- 
+- 			swi(Wimp_SendMessage, 17, block, block[5], block[6]);
+- 		    }
+- 		    else
+- 			ro_drag_finished(block);
+- 		    break;
+- 		case 8:
+- 		    if (block[6] == 13)
+- 		    {
+- 			retval = wimp_strsave(fname);
+- 			done_save = TRUE;
+- 		    }
+- 		    else if (block[6] == 0x1b)
+- 			done_save = TRUE;
+- 		    else
+- 			swi(Wimp_ProcessKey, block[6]);
+- 		    break;
+- 		case 17:
+- 		case 18:
+- 		    if (block[4] == 2 && block[9] != -1)
+- 		    {
+- 			/* DataSaveAck from dragging icon. */
+- 			retval = wimp_strsave(((char_u *) block) + 44);
+- 			done_save = TRUE;
+- 		    }
+- 		    else if (block[4] == 0x400c9)
+- 		    {
+- 			/* MenusDeleted */
+- 			done_save = TRUE;
+- 		    }
+- 		    else
+- 			ro_message(block);
+- 		    break;
+- 	    }
+- 	}
+- 	block[0] = save_window;
+- 	swi(Wimp_CloseWindow, 0, block);
+- 	swi(Wimp_GetCaretPosition, 0, block);
+- 	if (block[0] == -1)
+- 	    swi(Wimp_SetCaretPosition, gui.window_handle, -1, 0, 0, -1, -1);
+- 
+- 	return retval;
+-     }
+-     else if (initdir)
+-     {
+- 	/* Open a directory viewer */
+- 	length = strlen(initdir);
+- 
+- 	if (length > 240)
+- 	    return NULL;	/* Path too long! */
+- 
+- 	length = sprintf(command, "Filer_OpenDir %s", initdir);
+- 	while (command[length - 1] == '.')
+- 	    length--;
+- 	command[length] = '\0';
+- 	swi(OS_CLI, command);
+-     }
+-     return NULL;
+- }
+--- 0 ----
+*** ../vim-7.3.186/src/os_riscos.c	2010-08-15 21:57:27.000000000 +0200
+--- src/os_riscos.c	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,1292 ****
+- /* vi:set ts=8 sts=4 sw=4:
+-  *
+-  * VIM - Vi IMproved	by Bram Moolenaar
+-  *
+-  * Do ":help uganda"  in Vim to read copying and usage conditions.
+-  * Do ":help credits" in Vim to see a list of people who contributed.
+-  * See README.txt for an overview of the Vim source code.
+-  */
+- 
+- #include "vim.h"
+- 
+- /*
+-  * os_riscos.c
+-  *
+-  * Thomas Leonard <tal197@ecs.soton.ac.uk>
+-  */
+- 
+- const char *__dynamic_da_name = "Vim heap"; /* Enable and name our dynamic area */
+- int ro_line_mode = TRUE;  /* For Ex mode we much echo chars to the screen ourselves */
+- int windowed;		/* Flag - are we running inside a text window? */
+- int WinLeft, WinTop;	/* We might be started inside a text window */
+- int ScrollTop;		/* Make cursor movements relative to ScrollTop. */
+- 
+- int old_escape_state = -1;
+- int old_cursor_state = -1;
+- 
+- #define rgb(r,g,b) ((b<<24) + (g<<16) + (r<<8))
+- #define NORMAL_FG 0x00000000
+- #define NORMAL_BG 0xffffffff
+- 
+- /* Convert a DOS colour number to an RGB palette entry.
+-  * Mappings from X11 rgb/txt file.
+-  */
+-     static int
+- map_colour(dos)
+-     int dos;		/* Standard DOS colour number. */
+- {
+-     switch (dos)
+-     {
+- 	case 0: return 0;			/* Black */
+- 	case 1: return rgb(0,0,139);		/* DarkBlue */
+- 	case 2: return rgb(0,100,0);		/* DarkGreen */
+- 	case 3: return rgb(0,139,139);		/* DarkCyan */
+- 	case 4: return rgb(139,0,0);		/* DarkRed */
+- 	case 5: return rgb(139,0,139);		/* DarkMagenta */
+- 	case 6: return rgb(165,42,42);		/* Brown, DarkYellow */
+- 	case 7: return rgb(211,211,211);	/* LightGray, LightGrey, Gray, Grey */
+- 	case 8: return rgb(169,169,169);	/* DarkGray, DarkGrey */
+- 	case 9: return rgb(173,216,230);	/* Blue, LightBlue */
+- 	case 10: return rgb(144,238,144);	/* Green, LightGreen */
+- 	case 11: return rgb(224,255,255);	/* Cyan, LightCyan */
+- 	case 12: return rgb(255,0,0);		/* Red, LightRed */
+- 	case 13: return rgb(255,0,255);		/* Magenta, LightMagenta */
+- 	case 14: return rgb(255,255,0);		/* Yellow, LightYellow */
+- 	case 15: return rgb(255,255,255);	/* White */
+-     }
+-     return rgb(100,100,100);
+- }
+- 
+-     static void
+- text_fg(fg)
+-     int fg;		/* Foregound colour in the form &BBGGRR00 */
+- {
+-     xswi(ColourTrans_SetTextColour, fg, 0, 0, 0);
+- }
+- 
+-     static void
+- text_bg(bg)
+-     int		bg;	/* Backgound colour in the form &BBGGRR00 */
+- {
+-     xswi(ColourTrans_SetTextColour, bg, 0, 0, 1 << 7);
+- }
+- 
+- #define OUT_NORMAL 0
+- #define OUT_NUMBER 1		/* Reading in a number */
+- 
+-     void
+- mch_write(s, len)
+-     char_u  *s;
+-     int	    len;
+- {
+-     static int mode = OUT_NORMAL;
+-     static int x, y;			/* For reading numbers in. */
+- 
+-     if (!term_console)
+-     {
+- 	/* Maybe we are running Vim remotely - don't interpret chars */
+- 	while (len--)
+- 	{
+- 	    char_u c = *s++;
+- 	    swi(OS_WriteC, c);
+- 	    /* We might need to send a CR too. This shouldn't
+- 	     * hurt if we don't need it, should it?
+- 	     */
+- 	    if (c == 10)
+- 		swi(OS_WriteI + 13);
+- 	}
+- 	return;
+-     }
+- 
+-     while (len--)
+-     {
+- 	char_u c = *s++;
+- 	switch (mode)
+- 	{
+- 	    case OUT_NUMBER:
+- 		if (c < '0' || c > '9')
+- 		{
+- 		    mode = OUT_NORMAL;
+- 		}
+- 		else
+- 		{
+- 		    x = (x * 10) + c - '0';
+- 		    continue;
+- 		}
+- 	    /* note: no break here! */
+- 
+- 	    case OUT_NORMAL:
+- 		switch (c)
+- 		{
+- 		    case 1:
+- 			/* Number (in decimal) follows. */
+- 			mode = OUT_NUMBER;
+- 			y = x;
+- 			x = 0;
+- 			break;
+- 		    case 2:
+- 			/* Position cursor. */
+- 			swi(OS_WriteI + 31);
+- 			swi(OS_WriteC, x);
+- 			swi(OS_WriteC, y - ScrollTop);
+- 			break;
+- 		    case 3:
+- 			/* Set scroll region. */
+- 			if (x == Rows -1 && y == 0 && !windowed)
+- 			{
+- 			    /* Whole screen - remove text window.
+- 			     * This is MUCH faster.
+- 			     */
+- 			    swi(OS_WriteI + 26);
+- 			}
+- 			else
+- 			{
+- 			    /* Create a text window. */
+- 			    swi(OS_WriteI + 28);
+- 			    swi(OS_WriteC, WinLeft);
+- 			    swi(OS_WriteC, WinTop + x);
+- 			    swi(OS_WriteC, WinLeft + Columns - 1);
+- 			    swi(OS_WriteC, WinTop + y);
+- 			}
+- 			ScrollTop = y;
+- 			break;
+- 		    case 4:
+- 			/* Normal mode. */
+- 			text_fg(NORMAL_FG);
+- 			text_bg(NORMAL_BG);
+- 			break;
+- 		    case 5:
+- 			/* Reverse mode. */
+- 			text_fg(NORMAL_BG);
+- 			text_bg(NORMAL_FG);
+- 			break;
+- 		    case 10:
+- 			swi(OS_NewLine);
+- 			break;
+- 		    case 14:
+- 			/* Cursor invisible. */
+- 			swi(OS_WriteN,
+- 			     "\027\001\000\000\000\000\000\000\000\000",
+- 			     10);
+- 			break;
+- 		    case 15:
+- 			/* Cursor visible. */
+- 			swi(OS_WriteN,
+- 			     "\027\001\002\000\000\000\000\000\000\000",
+- 			     10);
+- 			break;
+- 		    case 16:
+- 			/* Cursor very visible (flash) */
+- 			swi(OS_WriteN,
+- 			     "\027\001\003\000\000\000\000\000\000\000",
+- 			     10);
+- 		    case 17:
+- 			/* Set foreground colour. */
+- 			text_fg(map_colour(x));
+- 			break;
+- 		    case 18:
+- 			/* Set background colour. */
+- 			text_bg(map_colour(x));
+- 			break;
+- 		    case 19:
+- 			/* Scroll text down. */
+- 			swi(OS_WriteN,
+- 			     "\027\007\000\002\000\000\000\000\000\000",
+- 			     10);
+- 			break;
+- 		    default:
+- 			swi(OS_WriteC, c);
+- 		}
+- 		continue;
+- 
+- 	    default:
+- 		printf("[output error]");
+- 		mode = OUT_NORMAL;
+- 	}
+-     }
+- }
+- 
+- /*
+-  * mch_inchar(): low level input funcion.
+-  * Get a characters from the keyboard.
+-  * Return the number of characters that are available.
+-  * If wtime == 0 do not wait for characters.
+-  * If wtime == n wait n msecs for characters.
+-  * If wtime == -1 wait forever for characters.
+-  *
+-  * TODO: call convert_input() for 'fileencoding' to 'encoding' conversion.
+-  */
+-     int
+- mch_inchar(buf, maxlen, wtime, tb_change_cnt)
+-     char_u  *buf;
+-     int	    maxlen;
+-     long    wtime;
+-     int	    tb_change_cnt;
+- {
+-     int got=0;
+-     unsigned int start_time = clock();
+- 
+-     if (ro_line_mode)
+-     {
+- 	/* We're probably in Ex mode - get whole lines at a time. */
+- 
+- 	static char_u	line_buffer[256];
+- 	static int	remaining_chars = 0;
+- 	static int	buf_pos = 0;
+- 
+- 	/* Do we need to fetch another line? */
+- 	if (remaining_chars == 0)
+- 	{
+- 	    int		old_esc_state;
+- 	    swi(OS_Byte, 200, 1, 0xfe);
+- 	    old_esc_state = r1;
+- 
+- 	    buf_pos = 0;
+- 	    if (xswi(OS_ReadLine, line_buffer, 255, 0, 255) & (c_flag | v_flag))
+- 	    {
+- 		got_int = TRUE;	    /* ESC pressed */
+- 		r1 = 0;
+- 	    }
+- 	    line_buffer[r1] = 13;
+- 	    remaining_chars = r1 + 1;	/* Count CR as part of input */
+- 
+- 	    swi(OS_Byte, 200, old_esc_state, 0);
+- 	}
+- 
+- 	/* Can we send the rest of the buffer back in one go? */
+- 	if (remaining_chars <= maxlen)
+- 	{
+- 	    int	    got = remaining_chars;
+- 
+- 	    memcpy(buf, line_buffer + buf_pos, got);
+- 	    remaining_chars = 0;
+- 	    return  got;
+- 	}
+- 
+- 	/* Send as much as we can */
+- 	memcpy(buf, line_buffer + buf_pos, maxlen);
+- 	buf_pos += maxlen;
+- 	remaining_chars -= maxlen;
+- 
+- 	return maxlen;
+-     }
+- 
+-     if (!term_console)
+-     {
+- 	/* Use OS_ReadC for all input.
+- 	 * Avoids problems with remote access getting interference from
+- 	 * the keyboard.
+- 	 */
+- 	if (wtime == 0)
+- 	    return 0;	    /* Ignore quick key checks */
+- 
+- 	if (xswi(OS_ReadC) & c_flag)
+- 	{
+- 	    got_int = TRUE;	/* ESC pressed - can this happen? */
+- 	    swi(OS_Byte, 124);	/* Clear Escape state */
+- 	    r0 = 0x1b;		/* It *might* not have been Escape! */
+- 	}
+- 	buf[0] = r0;
+- 	return 1;
+-     }
+- 
+-     /*
+-      * OK, here's the plan:
+-      *
+-      * 1) Wait until wtime expires or we get a key
+-      * 2) Get keys until the keyboard buffer is empty or buf is full
+-      */
+- 
+-     while (xswi(OS_Byte,145,0) & c_flag)
+-     {
+- 	/* Nothing at all in the keyboard buffer.
+- 	 * Has our time expired yet?
+- 	 */
+- 	if ( (wtime != -1) && (clock() - start_time) >= wtime )
+- 	    return 0;		/* Nothing read - giving up */
+-     }
+- 
+-     /* We've got one char (in r2) - are there any more? */
+- 
+-     while (got < maxlen)
+-     {
+- 	buf[got++] = r2;
+- 
+- 	if (xswi(OS_Byte,145,0) & c_flag)
+- 	    return got;		/* Keyboard buffer empty */
+-     }
+-     return got;			/* buf is full */
+- }
+- 
+- /*
+-  * return non-zero if a character is available
+-  */
+-     int
+- mch_char_avail()
+- {
+-     if (!term_console)
+- 	return 0;	    /* Can't tell */
+-     if (xswi(OS_Byte, 152, 0) & c_flag)
+- 	return 0;
+-     return 1;
+- }
+- 
+- /* Find out how much free memory we have.
+-  * I don't know how to work this out exactly but, since we can claim
+-  * more memory from the OS, let's just report the free pool size.
+-  * Dynamic area 6 doesn't exist pre 3.6 according to StrongHelp, so
+-  * we'll use Wimp_SlotSize. If that fails (outside the desktop?)
+-  * then just return a big number and hope.
+-  */
+-     long_u
+- mch_avail_mem(special)
+-     int special;
+- {
+-     if (xswi(Wimp_SlotSize, -1, -1) & v_flag)
+- 	return 0x7fffffff;
+-     return r2;
+- }
+- 
+-     void
+- mch_delay(msec, ignoreinput)
+-     long	msec;
+-     int		ignoreinput;
+- {
+-     int		start_time, time_now;
+-     int		csec = msec / 10;
+- 
+-     swi(OS_ReadMonotonicTime);
+-     start_time = r0;
+- 
+-     for (;;)
+-     {
+- 	swi(OS_ReadMonotonicTime);
+- 	time_now = r0;
+- 	if (time_now - start_time > csec)
+- 	    return;
+- #ifdef FEAT_GUI
+- 	/* In the GUI, allow other programs to run while waiting. */
+- 	if (gui.in_use)
+- 	    gui_mch_wait_for_chars(start_time + csec);
+- #endif
+-     }
+- }
+- 
+- /*
+-  * If the machine has job control, use it to suspend the program,
+-  * otherwise fake it by starting a new shell.
+-  */
+-     void
+- mch_suspend()
+- {
+-     suspend_shell();
+- }
+- 
+-     void
+- mch_init()
+- {
+-     /*
+-      * Read window size first. Calls to mch_get_shellsize() will
+-      * simply return these values in future so that setting the
+-      * text window (used for scrolling) won't give strange results.
+-      */
+- 
+-     int buf[7] = {132, 135, 256, 257, 1, 2, -1};
+- 
+-     /* Command windows are no longer forced open, since if we are
+-      * in the desktop then we'll use the GUI version.
+-      * Opening a command window here messes up the GUI version startup
+-      */
+- #ifndef FEAT_GUI
+-     swi(OS_WriteI);
+- #endif
+-     swi(OS_ReadVduVariables, buf, buf);
+-     WinLeft = buf[0];
+-     WinTop  = buf[1];
+-     Columns = buf[2];
+-     Rows    = buf[3] + 1;	/* Seems to be one off (VduVars wrong?) */
+-     ScrollTop = 0;
+- 
+-     /* Are we running in a textwindow? */
+-     if (Rows == buf[5] + 1 && Columns == buf[4] + 1)
+- 	windowed = 0;
+-     else
+- 	windowed = 1;
+- 
+-     /* Choose a nice colour scheme. */
+-     text_fg(NORMAL_FG);
+-     text_bg(NORMAL_BG);
+- }
+- 
+- /*
+-  * Check_win checks whether we have an interactive stdout.
+-  */
+- /* ARGSUSED */
+-     int
+- mch_check_win(argc, argv)
+-     int	    argc;
+-     char    **argv;
+- {
+-     return OK;
+- }
+- 
+- /*
+-  * Return TRUE if the input comes from a terminal, FALSE otherwise.
+-  */
+-     int
+- mch_input_isatty()
+- {
+-     if (xswi(OS_ChangeRedirection, -1, -1) & v_flag)
+- 	return TRUE;		/* Error - TRUE is probably correct though */
+-     if (r0 == 0)
+- 	return TRUE;
+-     return FALSE;
+- }
+- 
+- #ifdef FEAT_TITLE
+-     int
+- mch_can_restore_title()
+- {
+-     return FALSE;
+- }
+- 
+-     int
+- mch_can_restore_icon()
+- {
+-     return FALSE;
+- }
+- 
+- 
+- /*
+-  * Set the window title and icon.
+-  */
+-     void
+- mch_settitle(title, icon)
+-     char_u *title;
+-     char_u *icon;
+- {
+-     if (title == NULL)
+- 	title = (char_u *) "<untitled>";
+- #ifdef FEAT_GUI
+-     if (gui.in_use && strcmp(title, gui.window_title))
+-     {
+- 	int length;
+- 	length = strlen(title);
+- 	if (length >= gui.window_title_size)
+- 	    length = gui.window_title_size - 1;
+- 	strncpy(gui.window_title, title, length);
+- 	gui.window_title[length] = 0;
+- 	ro_redraw_title(gui.window_handle);
+-     }
+- #endif
+-     return;
+- }
+- 
+- /*
+-  * Restore the window/icon title.
+-  * "which" is one of:
+-  *  1  only restore title
+-  *  2  only restore icon
+-  *  3  restore title and icon
+-  */
+-     void
+- mch_restore_title(which)
+-     int which;
+- {
+-     return;
+- }
+- #endif
+- 
+- /*
+-  * Insert user name in s[len].
+-  * Return OK if a name found.
+-  */
+-     int
+- mch_get_user_name(s, len)
+-     char_u  *s;
+-     int	    len;
+- {
+-     /* RISC OS doesn't support user names. */
+-     *s = NUL;
+-     return FAIL;
+- }
+- 
+- /*
+-  * Insert host name in s[len].
+-  */
+- 
+-     void
+- mch_get_host_name(s, len)
+-     char_u  *s;
+-     int	    len;
+- {
+-     if (xswi(OS_ReadVarVal, "Machine$Name", s, len, 0, 3) & v_flag)
+-     {
+- 	/* Variable does not exist (normal operation) */
+- 	vim_strncpy(s, "(unknown)", len - 1);
+-     }
+- }
+- 
+- /*
+-  * return process ID
+-  */
+-     long
+- mch_get_pid()
+- {
+-     if (xswi(Wimp_ReadSysInfo, 5) & v_flag)
+- 	return 0;
+-     return r0;
+- }
+- 
+- /*
+-  * Get name of current directory into buffer 'buf' of length 'len' bytes.
+-  * Return OK for success, FAIL for failure.
+-  */
+-     int
+- mch_dirname(buf, len)
+-     char_u  *buf;
+-     int	    len;
+- {
+-     if (xswi(OS_FSControl, 37, "@", buf, 0, 0, len) & v_flag)
+- 	return FAIL;
+-     return OK;
+- }
+- 
+- /*
+-  * Get absolute file name into buffer 'buf' of length 'len' bytes.
+-  *
+-  * return FAIL for failure, OK for success
+-  */
+-     int
+- mch_FullName(fname, buf, len, force)
+-     char_u *fname, *buf;
+-     int len;
+-     int	force;		/* Also expand when already absolute path name.
+- 			 * Not used under RISC OS.
+- 			 */
+- {
+-     if (xswi(OS_FSControl, 37, fname, buf, 0, 0, len) & v_flag)
+- 	return FAIL;
+-     return OK;
+- }
+- 
+- /*
+-  * Return TRUE if "fname" does not depend on the current directory.
+-  */
+-     int
+- mch_isFullName(fname)
+-     char_u	*fname;
+- {
+-     if (strstr(fname, "::") && strstr(fname,".$."))
+- 	return TRUE;
+-     return FALSE;
+- }
+- 
+- /*
+-  * Get file permissions for 'name'.
+-  * Returns -1 when it doesn't exist.
+-  */
+-     long
+- mch_getperm(name)
+-     char_u *name;
+- {
+-     struct stat statb;
+- 
+-     if (stat((char *)name, &statb))
+- 	return -1;
+-     return statb.st_mode;
+- }
+- 
+- /*
+-  * set file permission for 'name' to 'perm'
+-  *
+-  * return FAIL for failure, OK otherwise
+-  */
+-     int
+- mch_setperm(name, perm)
+-     char_u  *name;
+-     long    perm;
+- {
+-     return (chmod((char *)name, (mode_t)perm) == 0 ? OK : FAIL);
+- }
+- 
+- /*
+-  * Set hidden flag for "name".
+-  */
+- /* ARGSUSED */
+-     void
+- mch_hide(name)
+-     char_u	*name;
+- {
+-     /* can't hide a file */
+- }
+- 
+- /*
+-  * return TRUE if "name" is a directory
+-  * return FALSE if "name" is not a directory
+-  * return FALSE for error
+-  */
+-     int
+- mch_isdir(name)
+-     char_u *name;
+- {
+-     if (xswi(OS_File, 17, name) & v_flag)
+- 	return FALSE;
+-     if (r0 == 2 || r0 == 3)
+- 	return TRUE;		/* Count image files as directories. */
+-     return FALSE;
+- }
+- 
+- /*
+-  * Return 1 if "name" can be executed, 0 if not.
+-  * Return -1 if unknown. Requires which to work.
+-  */
+-     int
+- mch_can_exe(name)
+-     char_u	*name;
+- {
+-     char_u	*buf;
+-     char_u	*p;
+-     int		retval;
+- 
+-     buf = alloc((unsigned)STRLEN(name) + 7);
+-     if (buf == NULL)
+- 	return -1;
+-     sprintf((char *)buf, "which %s", name);
+-     p = get_cmd_output(buf, NULL, SHELL_SILENT);
+-     vim_free(buf);
+-     if (p == NULL)
+- 	return -1;
+-     /* result can be: "name: Command not found" */
+-     retval = (*p != NUL && strstr((char *)p, "not found") == NULL);
+-     vim_free(p);
+-     return retval;
+- }
+- 
+- /*
+-  * Check what "name" is:
+-  * NODE_NORMAL: file or directory (or doesn't exist)
+-  * NODE_WRITABLE: writable device, socket, fifo, etc.
+-  * NODE_OTHER: non-writable things
+-  */
+-     int
+- mch_nodetype(name)
+-     char_u	*name;
+- {
+-     /* TODO */
+-     return NODE_NORMAL;
+- }
+- 
+-     void
+- mch_early_init()
+- {
+-     /* Turn off all the horrible filename munging in UnixLib. */
+-     int __riscosify_control = __RISCOSIFY_NO_PROCESS;
+- }
+- 
+-     void
+- mch_exit(r)
+-     int r;
+- {
+-     settmode(TMODE_COOK);
+-     exiting = TRUE;
+-     out_flush();
+-     ml_close_all(TRUE);		/* remove all memfiles */
+- 
+- #ifdef FEAT_GUI
+-     if (gui.in_use)
+- 	gui_exit(r);
+- #endif
+-     swi(OS_NewLine);
+-     if (old_escape_state != -1)
+- 	swi(OS_Byte, 229, old_escape_state, 0);
+-     if (old_cursor_state != -1)
+- 	swi(OS_Byte, 4, old_cursor_state);
+-     exit(r);
+- }
+- 
+-     void
+- mch_settmode(tmode)
+-     int		tmode;	    /* TMODE_RAW or TMODE_COOK */
+- {
+-     if (tmode == TMODE_COOK)
+-     {
+- 	ro_line_mode = TRUE;
+- 	return;
+-     }
+- 
+-     ro_line_mode = FALSE;
+- 
+-     if (term_console)
+-     {
+- 	/* Block cursor. */
+- 	swi(OS_WriteN,
+- 		"\027\000\012\000\000\000\000\000\000\000",
+- 		10);
+- 
+- 	/* Disable the standard cursor key actions. */
+- 	swi(OS_Byte, 4, 1);
+- 	if (old_cursor_state == -1)
+- 	    old_cursor_state = r1;
+-     }
+- 
+-     /* Stop Escape from quitting Vim! */
+-     swi(OS_Byte, 229, 1, 0);
+-     if (old_escape_state == -1)
+- 	old_escape_state = r1;
+- }
+- 
+- /*
+-  * set mouse clicks on or off (only works for xterms)
+-  */
+-     void
+- mch_setmouse(on)
+-     int	    on;
+- {
+- }
+- 
+- /*
+-  * set screen mode, always fails.
+-  */
+- /* ARGSUSED */
+-     int
+- mch_screenmode(arg)
+-     char_u   *arg;
+- {
+-     EMSG(_(e_screenmode));
+-     return FAIL;
+- }
+- 
+- /*
+-  * Try to get the current window size.
+-  * Return OK when size could be determined, FAIL otherwise.
+-  * Simply return results stored by mch_init() if we are the
+-  * machine's console. If not, we don't know how big the screen is.
+-  */
+-     int
+- mch_get_shellsize()
+- {
+-     /* if size changed: screenalloc will allocate new screen buffers */
+-     return term_console ? OK : FAIL;
+- }
+- 
+- /*
+-  * Can't change the size.
+-  * Assume the user knows what he's doing and use the new values.
+-  */
+-     void
+- mch_set_shellsize()
+- {
+-     /* Assume the user knows what he's doing and use the new values. */
+- }
+- 
+- /*
+-  * Rows and/or Columns has changed.
+-  */
+-     void
+- mch_new_shellsize()
+- {
+-     /* Nothing to do. */
+- }
+- 
+-     int
+- mch_call_shell(cmd, options)
+-     char_u	*cmd;
+-     int		options;	/* SHELL_*, see vim.h */
+- {
+-     int		retval;
+-     int		tmode = cur_tmode;
+- 
+-     if (cmd == NULL)
+- 	cmd = (char_u *) "GOS";
+- 
+- #ifdef FEAT_GUI
+-     if (gui.in_use)
+- 	return gui_mch_call_shell(cmd, options);
+- #endif
+-     if (options & SHELL_COOKED)
+- 	settmode(TMODE_COOK);		/* set to normal mode */
+-     MSG_PUTS("\n");
+- 
+-    /* I don't even want to think about what UnixLib must
+-     * be doing to allow this to work...
+-     */
+-     retval = system(cmd);
+-     if (retval && !(options & SHELL_SILENT))
+- 	EMSG(strerror(EOPSYS));		/* Doesn't seem to set errno? */
+- 
+-     swi(OS_Byte, 229, 1, 0);		/* Re-disable escape */
+-     if (tmode == TMODE_RAW)
+- 	settmode(TMODE_RAW);		/* set to raw mode */
+-     return retval ? FAIL : OK;
+- }
+- 
+- /*
+-  * Check for Escape being pressed right now.
+-  * [ different if !term_console? ]
+-  */
+-     void
+- mch_breakcheck()
+- {
+-     if (xswi(OS_Byte, 121, 0xf0) & v_flag)
+- 	return;
+-     if (r1 == 0xff)
+-     {
+- 	got_int = TRUE;
+- 	swi(OS_Byte, 15, 1);	/* Flush input buffer */
+-     }
+- }
+- 
+- /*
+-  * Recursively expand one path component into all matching files and/or
+-  * directories.
+-  * "path" has backslashes before chars that are not to be expanded.
+-  * Return the number of matches found.
+-  */
+-     int
+- mch_expandpath(gap, path, flags)
+-     garray_T	*gap;	/* Grow array for results. */
+-     char_u	*path;
+-     int		flags;	/* EW_* flags */
+- {
+-     int		got;	/* Number of matches. */
+-     char_u	*pattern;
+- 
+-    /* Plan:
+-     *
+-     * 1) Get first part of path - no wildcards
+-     * 2) Get next path element (wildcarded)
+-     * 3) Get rest of path
+-     *
+-     * If (3) is nothing then only the leaf is wildcarded - add to gap
+-     * Otherwise call recursively for each path in (2), passing (3)
+-     *
+-     * This is just the header function.
+-     */
+- 
+-     /* We must be able to modifiy path, so make a copy */
+-     pattern = vim_strsave(path);
+-     if (pattern == NULL)
+- 	return 0;
+-     got = expand_section(gap, (char_u *)"", pattern, flags);
+-     vim_free(pattern);
+-     return got;
+- }
+- 
+- /*
+-  * expand_section(gap, "$.Dir1.Dir2", "ABBA*.myleaf##")
+-  *
+-  * calls expand_section(gap, "$.Dir1.Dir2.ABBA_Gold", "myleaf##")
+-  *   and expand_section(gap, "$.Dir1.Dir2.ABBA_Live", "myleaf##")
+-  *
+-  * If rest is just a leaf then all matches are added to gap.
+-  *
+-  * Returns number of items added to gap.
+-  */
+-     int
+- expand_section(gap, root, rest, flags)
+-     garray_T	*gap;
+-     char_u	*root;	/* Non-wildcarded path to search */
+-     char_u	*rest;	/* Wildcarded remainder of path */
+-     int		flags;	/* Add dirs/files/missing objects. */
+- {
+-     static char_u buf[MAXPATHL];	/* Temporary buffer. */
+-     char_u dir[MAXPATHL];
+-     int start_element = -1;		/* Start of wildcarded element */
+-     char_u c;
+-     int i;
+-     int got, dir_pos;
+-     int buflen;			/* Chars used in buf[] */
+-     int colon = 0;		/* Dir ends in ':' */
+- 
+-     buflen = strlen(root);
+-     STRNCPY(buf, root, buflen);	/* Copy root into buffer. */
+- 
+-    /*
+-     * Find end of nonwildcarded section.
+-     * Count ':' as a path sep since Vim:Bug* is a valid pathname.
+-     */
+- 
+-     for (i = 0; c = rest[i]; i++)
+-     {
+- 	if (c == PATHSEP)
+- 	{
+- 	    start_element = i;
+- 	    colon = 0;
+- 	}
+- 	if (c == ':')
+- 	{
+- 	    start_element = i + 1;
+- 	    colon = 1;
+- 	}
+- 	if (c == '#' || c == '*')
+- 	    break;
+-     }
+-     if (c == 0)
+- 	start_element = i;
+- 
+-    /*
+-     * start_element +> terminator for non-wildcarded section.
+-     * Transfer this bit into buf.
+-     */
+-     if (buflen + start_element + 4 >= MAXPATHL)
+-        return 0;			/* Buffer full */
+-     if (start_element >= 0)
+-     {
+- 	if (*root && !colon)
+- 	    buf[buflen++] = PATHSEP;
+- 	strncpy(buf + buflen, rest, start_element);
+- 	buflen += start_element;
+-     }
+-     buf[buflen] = 0;
+- 
+-    /*
+-     * Did we reach the end of the string without hitting any wildcards?
+-     */
+-     if (c == 0)
+-     {
+- 	/* Yes - add combined path to grow array and return. */
+- 	addfile(gap, buf, flags);
+- 	return 1;
+-     }
+- 
+-     if (start_element < 0 || !colon)
+- 	start_element++;
+-     rest += start_element;
+- 
+-    /*
+-     * rest does contain wildcards if we get here.
+-     *
+-     * Now : have we reached the leaf names part yet?
+-     * If so, add all matches (files and dirs) to gap.
+-     * If not, get next path element and scan all matching directories.
+-     */
+- 
+-     start_element = -1;
+-     for (i = 0; rest[i]; i++)
+-     {
+- 	if (rest[i] == '.')
+- 	{
+- 	    start_element = i;
+- 	    rest[i] = 0;		/* Break string here. */
+- 	    break;
+- 	}
+-     }
+- 
+-     /* If start_element is -1 then we are matching leaf names */
+- 
+-     r3 = 0;			/* Number of objs read. */
+-     dir_pos = 0;		/* Position through directory. */
+-     got = 0;			/* Files added so far. */
+-     while (dir_pos != -1)
+-     {
+- 	buf[buflen] = 0;
+- 	if (xswi(OS_GBPB, 9,
+- 		buf,				/* Directory to scan. */
+- 		buf + buflen + (1 - colon),	/* Buffer for result. */
+- 		1,			/* Number of objects to read. */
+- 		dir_pos,		/* Search position. */
+- 		MAXPATHL - 2 - buflen,	/* Size of result buffer. */
+- 		rest)			/* Wildcarded leafname. */
+- 			& v_flag)
+- 	{
+- 	    EMSG(r0 + 4);
+- 	    r4 = -1;
+- 	}
+- 	dir_pos = r4;		/* r4 corrupted by addfile() */
+- 	if (r3 > 0)
+- 	{
+- 	    char_u *path = buf;
+- 	    if (buflen == 0)
+- 		path++;			/* Don't do '.File' */
+- 	    else if (!colon)
+- 		buf[buflen] = '.';		/* Join path and leaf */
+- 
+- 	   /* Path -> full path of object found */
+- 	    if (start_element == -1)
+- 	    {
+- 		addfile(gap, path, flags);
+- 		got++;
+- 	    }
+- 	    else
+- 	    {
+- 	       /* Scan into subdirectories and images; ignore files */
+- 		swi(OS_File, 17, path);
+- 		if (r0 == 2 || r0 == 3)
+- 		    got += expand_section(gap,
+- 						path,
+- 						rest + start_element + 1,
+- 						flags);
+- 	    }
+- 	}
+-     }
+- 
+-     /* Restore the dot if we removed it. */
+-     if (start_element >= 0)
+- 	rest[start_element] = '.';
+-     return got;
+- }
+- 
+- /*
+-  * mch_expand_wildcards() - this code does wild-card pattern matching using
+-  * the shell. It isn't used under RISC OS.
+-  *
+-  * return OK for success, FAIL for error (you may lose some memory) and put
+-  * an error message in *file.
+-  *
+-  * num_pat is number of input patterns
+-  * pat is array of pointers to input patterns
+-  * num_file is pointer to number of matched file names
+-  * file is pointer to array of pointers to matched file names
+-  */
+-     int
+- mch_expand_wildcards(num_pat, pat, num_file, file, flags)
+-     int		    num_pat;
+-     char_u	  **pat;
+-     int		   *num_file;
+-     char_u	 ***file;
+-     int		    flags;		/* EW_* flags */
+- {
+-     /* This doesn't get called unless SPECIAL_WILDCHAR is defined. */
+-     return FAIL;
+- }
+- 
+- /*
+-  * Return TRUE if "p" contains wildcards which can be expanded by
+-  * mch_expandpath().
+-  */
+-     int
+- mch_has_exp_wildcard(p)
+-     char_u	*p;
+- {
+-     if (vim_strpbrk((char_u *)"*#", p))
+- 	return TRUE;
+-     return FALSE;
+- }
+- 
+- /* Return TRUE if "p" contains wildcards. */
+-     int
+- mch_has_wildcard(p)
+-     char_u	*p;
+- {
+-     if (vim_strpbrk((char_u *)"*#`", p))
+- 	return TRUE;
+-     return FALSE;
+- }
+- 
+-     int			/* see Unix unlink(2) */
+- mch_remove(file)
+-     char_u *file;	/* Name of file to delete. */
+- {
+-     if (xswi(OS_FSControl, 27, file, 0, 0) & v_flag)
+- 	return EXIT_FAILURE;
+-     return EXIT_SUCCESS;
+- }
+- 
+- /* Try to make existing scripts work without modification.
+-  * Return a pointer to the new string (freed by caller), or NULL
+-  *
+-  * Two main cases:
+-  * - Absolute : $VIM/syntax/help.vim
+-  * - Relative : Adfs::4.$.!Vim.Resources.Syntax/help.vim
+-  */
+-     char_u *
+- mch_munge_fname(fname)
+-     char_u *fname;
+- {
+-     char_u c;
+-     int len;
+-     char_u *retval;
+- 
+-     retval = fname = vim_strsave(fname);
+-     if (fname == NULL)
+- 	return NULL;
+- 
+-     if (strncmp(fname, "$VIM/", 5) == 0)
+-     {
+- 	strncpy(fname, "Vim:", 4);
+- 	for (fname += 5; c = *fname; fname++)
+- 	{
+- 	    if (c == '.')
+- 		break;
+- 	    if (c == '/')
+- 		fname[-1] = '.';
+- 	    else
+- 		fname[-1] = c;
+- 	}
+- 	fname[-1] = '\0';
+-     }
+-     else
+-     {
+- 	/* Check to see if the file exists without modification. */
+- 	if (xswi(OS_File, 17, fname) & v_flag)
+- 	    r0 == 0;		/* Invalid filename? */
+- 	if (r0)
+- 	    return retval;
+- 
+- 	len = strlen(fname);
+- 	if (strcmp(fname + len - 4, ".vim") == 0)
+- 	{
+- 	    fname[len - 4] = '\0';
+- 	    for (; c = *fname; fname++)
+- 	    {
+- 		if (c == '/')
+- 		    *fname = '.';
+- 	    }
+- 	}
+-     }
+-     return retval;
+- }
+- 
+- /* QuickFix reads munged names from the error file.
+-  * Correct them.
+-  */
+-     int
+- ro_buflist_add(old_name)
+-     char_u  *old_name;	/* Name of file found by quickfix */
+- {
+-     char_u  *fname;
+-     char_u  *leaf;	/* Pointer to start of leaf in old_name */
+-     char_u  *ptr;
+-     char_u  c;
+-     int	    retval;
+- 
+-     if (old_name == NULL)
+- 	return buflist_add(NULL, 0);
+- 
+-     /* Copy the name so we can mess around with it. */
+-     fname = vim_strsave(old_name);
+-     if (fname == NULL)
+- 	/* Out of memory - can't modify name */
+- 	return buflist_add(old_name, 0);
+- 
+-     /* Change `dir/main.c' into `dir.c.main' */
+-     leaf = fname;
+-     for (ptr = fname; c = *ptr; ptr++)
+-     {
+- 	if (c == '/')
+- 	{
+- 	    leaf = ptr + 1;
+- 	    *ptr = '.';
+- 	}
+- 	else if (c == '.')
+- 	    break;
+-     }
+-     if (c == '.')
+-     {
+- 	/* Change `main.c' into `c.main'
+- 	 *	  |    |
+- 	 *      leaf  ptr
+- 	 */
+- 	ptr += old_name - fname;
+- 	*ptr = '\0';
+- 	sprintf(leaf,
+- 		"%s.%s",
+- 		ptr + 1,
+- 		leaf - fname + old_name);
+-     }
+- 
+-     retval = buflist_add(fname, 0);
+-     free(fname);
+-     return retval;
+- }
+- 
+- /* Change the current directory.
+-  * Strip trailing dots to make it easier to use with filename completion.
+-  * Return 0 for success, -1 for failure.
+-  */
+-     int
+- mch_chdir(dir)
+-     char_u  *dir;
+- {
+-     int	    length;
+-     int	    retval;
+-     char_u  *new_dir;
+- 
+-     if (p_verbose >= 5)
+-     {
+- 	verbose_enter();
+- 	smsg((char_u *)"chdir(%s)", dir);
+- 	verbose_leave();
+-     }
+-     length = strlen(dir);
+-     if (dir[length - 1] != '.')
+- 	return chdir(dir);	    /* No trailing dots - nothing to do. */
+-     new_dir = vim_strsave(dir);
+-     if (new_dir == NULL)
+- 	return chdir(dir);	    /* Can't allocate memory. */
+- 
+-     while (new_dir[--length] == '.')
+- 	new_dir[length] = '\0';
+- 
+-     retval = chdir(new_dir);
+-     vim_free(new_dir);
+-     return retval;
+- }
+- 
+- /* Examine the named file, and set the 'osfiletype' option
+-  * (in curbuf) to the file's type.
+-  */
+-     void
+- mch_read_filetype(file)
+-     char_u  *file;
+- {
+-     int	    type;
+-     char_u  type_string[9];
+-     int	    i;
+- 
+-     if (xswi(OS_File, 23, file) & v_flag)
+- 	type = 0xfff;		/* Default to Text */
+-     else
+- 	type = r6;
+- 
+-     /* Type is the numerical value - see if we have a textual equivalent */
+-     swi(OS_FSControl, 18, 0, type);
+-     ((int *) type_string)[0] = r2;
+-     ((int *) type_string)[1] = r3;
+-     type_string[8] = 0;
+-     for (i = 0; type_string[i] > ' '; i++)
+- 	;
+-     type_string[i] = 0;
+- 
+-     set_string_option_direct("osfiletype", -1, type_string, OPT_FREE, 0);
+-     return;
+- }
+- 
+-     void
+- mch_set_filetype(file, type)
+-     char_u  *file;
+-     char_u  *type;
+- {
+-     if (xswi(OS_FSControl, 31, type) & v_flag)
+-     {
+- 	EMSG(_("E366: Invalid 'osfiletype' option - using Text"));
+- 	r2 = 0xfff;
+-     }
+- 
+-     swi(OS_File, 18, file, r2);
+- }
+- 
+- /* Return TRUE if the file's type matches 'type'
+-  * RISC OS types always start with '&'
+-  */
+-     int
+- mch_check_filetype(fname, type)
+-     char_u  *fname;
+-     char_u  *type;
+- {
+-     int	    value;
+-     char    *end;
+- 
+-     if (*type != '&')
+- 	return FALSE;
+- 
+-     value = strtol(type + 1, &end, 16);
+-     if (*end)
+- 	return FALSE;		/* Invalid type (report error?) */
+- 
+-     if (xswi(OS_File, 23, fname) & v_flag)
+- 	return FALSE;		/* Invalid filename? */
+- 
+-     return (r0 && r6 == value);
+- }
+--- 0 ----
+*** ../vim-7.3.186/runtime/doc/os_risc.txt	2010-08-15 21:57:16.000000000 +0200
+--- runtime/doc/os_risc.txt	2011-05-10 16:19:25.000000000 +0200
+***************
+*** 1,322 ****
+! *os_risc.txt*   For Vim version 7.3.  Last change: 2010 Aug 07
+  
+  
+  		  VIM REFERENCE MANUAL    by Thomas Leonard
+  
+  
+  						*riscos* *RISCOS* *RISC-OS*
+! This file contains the particularities for the RISC OS version of Vim.
+  
+- The RISC OS port is a completely new port and is not based on the old "archi"
+- port.
+  
+- 1.  File locations		|riscos-locations|
+- 2.  Filename munging		|riscos-munging|
+- 3.  Command-line use		|riscos-commandline|
+- 4.  Desktop (GUI) use		|riscos-gui|
+- 5.  Remote use (telnet)		|riscos-remote|
+- 6.  Temporary files		|riscos-temp-files|
+- 7.  Interrupting		|riscos-interrupt|
+- 8.  Memory usage		|riscos-memory|
+- 9.  Filetypes			|riscos-filetypes|
+- 10. The shell			|riscos-shell|
+- 11. Porting new releases	|riscos-porting|
+- 
+- If I've missed anything, email me and I'll try to fix it.  In fact, even if I
+- haven't missed anything then email me anyway to give me some confidence that it
+- actually works!
+- 
+- Thomas Leonard <tal197@ecs.soton.ac.uk>
+- 
+- 	[these URLs no longer work...]
+-  Port homepage:	http://www.ecs.soton.ac.uk/~tal197/
+- 	or try:	http://www.soton.ac.uk/~tal197/
+- 
+- ==============================================================================
+- 							*riscos-locations*
+- 1. File locations
+- 
+- The Vim executable and shared resource files are all stored inside the !Vim
+- application directory.
+- 
+- When !Vim is first seen by the filer, it aliases the *vi and *ex commands to
+- run the command-line versions of Vim (see |riscos-commandline|).
+- 
+- !Vim.Resources and !Vim.Resources2 contain the files from the standard Vim
+- distribution, but modified slightly to work within the limits of ADFS, plus
+- some extra files such as the window templates.
+- 
+- User choices are read from "Choices:*" and are saved to "<Choices$Write>.*".
+- If you have the new !Boot structure then these should be set up already.  If
+- not, set Choices$Path to a list of directories to search when looking for
+- user configuration files.  Set Choices$Write to the directory you want files
+- to be saved into (so your search patterns and marks can be remembered between
+- sessions).
+- 
+- ==============================================================================
+- 							*riscos-munging*
+- 2. Filename munging
+- 
+- All pathname munging is disabled by default, so Vim should behave like a
+- normal RISC OS application now.  So, if you want to edit "doc/html" then you
+- actually type "*vi doc/html".
+- 
+- The only times munging is done is when:
+- 
+- - Searching included files from C programs, since these are always munged.
+-   See |[I|.
+-   Note: make sure you are in the right directory when you use this
+- 	command (i.e. the one with subdirectories "c" and "h").
+- 
+- - Sourcing files using |:so|.
+-   Paths starting "$VIM/" are munged like this:
+- 
+-   $VIM/syntax/help.vim  ->  Vim:syntax.help
+- 
+-   Also, files ending in ".vim" have their extensions removed, and slashes
+-   replaced with dots.
+- 
+- Some tag files and script files may have to be edited to work under this port.
+- 
+- ==============================================================================
+- 							*riscos-commandline*
+- 3. Command-line use
+- 
+- To use Vim from the command-line use the "*vi" command (or "*ex" for
+- |Ex-mode|).
+- 
+- Type "*vi -h" for a list of options.
+- 
+- Running the command-line version of Vim in a large high-color mode may cause
+- the scrolling to be very slow.  Either change to a mode with fewer colors or
+- use the GUI version.
+- 
+- Also, holding down Ctrl will slow it down even more, and Ctrl-Shift will
+- freeze it, as usual for text programs.
+- 
+- ==============================================================================
+- 							*riscos-gui*
+- 4. Desktop use
+- 
+- Limitations:
+- 
+- - Left scrollbars don't work properly (right and bottom are fine).
+- - Doesn't increase scroll speed if it gets behind.
+- 
+- You can resize the window by dragging the lower-right corner, even though
+- there is no icon shown there.
+- 
+- You can use the --rows and --columns arguments to specify the initial size of
+- the Vim window, like this: >
+- 
+-   *Vi -g --rows 20 --columns 80
+- 
+- The global clipboard is supported, so you can select some text and then
+- paste it directly into another application (provided it supports the
+- clipboard too).
+- 
+- Clicking Menu now opens a menu like a normal RISC OS program.  Hold down Shift
+- when clicking Menu to paste (from the global clipboard).
+- 
+- Dragging a file to the window replaces the CURRENT buffer (the one with the
+- cursor, NOT the one you dragged to) with the file.
+- 
+- Dragging with Ctrl held down causes a new Vim window to be opened for the
+- file (see |:sp|).
+- 
+- Dragging a file in with Shift held down in insert mode inserts the pathname of
+- the file.
+- 
+- :browse :w opens a standard RISC OS save box.
+- :browse :e opens a directory viewer.
+- 
+- For fonts, you have the choice of the system font, an outline font, the system
+- font via ZapRedraw and any of the Zap fonts via ZapRedraw: >
+- 
+-   :set guifont=
+- <			To use the system font via the VDU drivers.  Supports
+- 			bold and underline.
+- >
+-   :set guifont=Corpus.Medium
+- <			Use the named outline font.  You can use any font, but
+- 			only monospaced ones like Corpus look right.
+- >
+-   :set guifont=Corpus.Medium:w8:h12:b:i
+- <			As before, but with size of 8 point by 12 point, and
+- 			in bold italic.
+- 			If only one of width and height is given then that
+- 			value is used for both.  If neither is given then 10
+- 			point is used.
+- 
+- Thanks to John Kortink, Vim can use the ZapRedraw module.  Start the font name
+- with "!" (or "!!" for double height), like this: >
+- 
+-   :set guifont=!!
+- <			Use the system font, but via ZapRedraw.  This gives a
+- 			faster redraw on StrongARM processors, but you can't
+- 			get bold or italic text.  Double height.
+- >
+-   :set guifont=!script
+- <			Uses the named Zap font (a directory in VimFont$Path).
+- 			The redraw is the same speed as for "!!", but you get
+- 			a nicer looking font.
+- 			Only the "man+" and "script" fonts are supplied
+- 			currently, but you can use any of the Zap fonts if
+- 			they are in VimFont$Path.
+- 			Vim will try to load font files "0", "B", "I" and "IB"
+- 			from the named directory.  Only "0" (normal style) MUST
+- 			be present.  Link files are not currently supported.
+- 
+- Note that when using ZapRedraw the edit bar is drawn in front of the character
+- you are on rather than behind it.  Also redraw is incorrect for screen modes
+- with eigen values of 0.  If the font includes control characters then you can
+- get Vim to display them by changing the 'isprint' option.
+- 
+- If you find the scrolling is too slow on your machine, try experimenting
+- with the 'scrolljump' and 'ttyscroll' options.
+- 
+- In particular, StrongARM users may find that: >
+- 
+-   :set ttyscroll=0
+- 
+- makes scrolling faster in high-color modes.
+- 
+- =============================================================================
+- 							*riscos-remote*
+- 5. Remote use (telnet)
+- 
+- I have included a built-in termcap entry, but you can edit the termcap file to
+- allow other codes to be used if you want to use Vim from a remote terminal.
+- 
+- Although I do not have an internet connection to my Acorn, I have managed to
+- run Vim in a FreeTerm window using the loopback connection.
+- 
+- It seems to work pretty well now, using "*vi -T ansi".
+- 
+- ==============================================================================
+- 							*riscos-temp-files*
+- 6. Temporary files
+- 
+- If Vim crashes then the swap and backup files (if any) will be in the
+- directories set with the 'directory' and 'bdir' options.  By default the swap
+- files are in <Wimp$ScrapDir> (i.e. inside !Scrap) and backups are in the
+- directory you were saving to.  Vim will allow you to try and recover the file
+- when you next try to edit it.
+- 
+- To see a list of swap files, press <F12> and type "*vi -r".
+- 
+- Vim no longer brings up ATTENTION warnings if you try to edit two files with
+- the same name in different directories.
+- 
+- However, it also no longer warns if you try to edit the same file twice (with
+- two copies of Vim), though you will still be warned when you save that the
+- datestamp has changed.
+- 
+- ==============================================================================
+- 							*riscos-interrupt*
+- 7. Interrupting
+- 
+- To break out of a looping macro, or similar, hold down Escape in the
+- command-line version, or press CTRL-C in the GUI version.
+- 
+- ==============================================================================
+- 							*riscos-memory*
+- 8. Memory usage
+- 
+- Vim will use dynamic areas on RISC OS 3.5 or later.  If you can use them on
+- older machines then edit the !RunTxt and GVim files.  I don't know what UnixLib
+- does by default on these machines so I'm playing safe.
+- 
+- It doesn't work at all well without dynamic areas, since it can't change its
+- memory allocation once running.  Hence you should edit "!Vim.GVim" and
+- "!Vim.!RunTxt" to choose the best size for you.  You probably need at least
+- about 1400K.
+- 
+- ==============================================================================
+- 							*riscos-filetypes*
+- 9. Filetypes
+- 
+- You can now specify that autocommands are only executed for files of certain
+- types.  The filetype is given in the form &xxx, when xxx is the filetype.
+- 
+- Filetypes must be specified by number (e.g. &fff for Text).
+- 
+- The system has changed from version 5.3.  The new sequence of events is:
+- 
+- - A file is loaded. |'osfiletype'| is set to the RISC OS filetype.
+- - Based on the filetype and pathname, Vim will try to set |'filetype'| to the
+-   Vim-type of the file.
+- - Setting this option may load syntax files and perform other actions.
+- - Saving the file will give it a filetype of |'osfiletype'|.
+- 
+- Some examples may make this clearer:
+- 
+-   Kind of file loaded	osfiletype	filetype ~
+-   C code "c.hellow"	Text (&fff)	C
+-   LaTeX document	LaTeX (&2a8)	TeX
+-   Draw document		DrawFile (&aff)	(not changed)
+- 
+- ==============================================================================
+- 							*riscos-shell*
+- 10. The shell
+- 
+- - Bangs (!s) are only replaced if they are followed by a space or end-of-line,
+-   since many pathnames contain them.
+- 
+- - You can prefix the command with "~", which stops any output from being
+-   displayed.  This also means that you don't have to press <Enter> afterwards,
+-   and stops the screen from being redrawn. {only in the GUI version}
+- 
+- ==============================================================================
+- 							*riscos-porting*
+- 11. Porting new releases to RISC OS
+- 
+- Downloading everything you need:
+- 
+- - Get the latest source distribution (see www.vim.org)
+- - Get the runtime environment files (e.g. these help files)
+- - Get the RISC OS binary distribution (if possible)
+- 
+- 
+- Unarchiving:
+- 
+- - Create a raFS disk and put the archives on it
+- - Un-gzip them
+- - Un-tar them   (*tar xELf 50 archive/tar)
+- 
+- 
+- Recompiling the sources:
+- 
+- - Create c, s, and h directories.
+- - Put all the header files in "h".	     \
+- - Put all the C files in "c".		     | And lose the extensions
+- - Put the assembler file ("swis/s") in "s".  /
+- - Rename all the files in "proto" to "h", like this:
+-     raFS::VimSrc.source.proto.file/pro
+- 	  becomes
+-     raFS::VimSrc.source.h.file_pro
+- - In the files "h.proto" and "c.termlib", search and replace
+-     .pro"
+-        with
+-     _pro.h"
+- - Create a simple Makefile if desired and do "*make -k".
+-   Use "CC = gcc -DRISCOS -DUSE_GUI -O2 -x c" in the Makefile.
+- - Save the binary as !Vim.Vim in the binary distribution.
+- 
+- 
+- Updating the run-time environment:
+- 
+- - Replace old or missing files inside !Vim.Resources with the
+-   new files.
+- - Remove files in "doc" not ending in "/txt", except for "tags".
+- - Lose the extensions from the files in "doc".
+- - Edit the "doc.tags" file.  Remove extensions from the second column: >
+- 	:%s/^\(.[^\t]*\t.*\)\.txt\t/\1\t/
+- - Remove extensions from the syntax files.  Split them into two directories
+-   to avoid the 77 entry limit on old ADFS filesystems.
+- - Edit "Vim:FileType" to match "*.c.*" as well as "*/c" and so on.
+-   Add filetype checking too.
+- - Edit "Vim:Menu" and remove all the keys from the menus: >
+- 	:%s/<Tab>[^ \t]*//
+- <
+   vim:tw=78:ts=8:ft=help:norl:
+--- 1,12 ----
+! *os_risc.txt*   For Vim version 7.3.  Last change: 2011 May 10
+  
+  
+  		  VIM REFERENCE MANUAL    by Thomas Leonard
+  
+  
+  						*riscos* *RISCOS* *RISC-OS*
+! The RISC OS support has been removed from Vim with patch 7.3.187.
+! If you would like to use Vim on RISC OS get the files from before that patch.
+  
+  
+   vim:tw=78:ts=8:ft=help:norl:
+*** ../vim-7.3.186/src/version.c	2011-05-10 16:12:40.000000000 +0200
+--- src/version.c	2011-05-10 16:37:20.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     187,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+81. At social functions you introduce your husband as "my domain server."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.188 b/source/ap/vim/patches/7.3.188
new file mode 100644
index 00000000..f5845430
--- /dev/null
+++ b/source/ap/vim/patches/7.3.188
@@ -0,0 +1,184 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.188
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.188
+Problem:    More RISC OS files to remove.
+Solution:   Remove them.  Update the file list.
+Files:	    src/proto/gui_riscos.pro, src/proto/os_riscos.pro, Filelist
+
+
+*** ../vim-7.3.187/src/proto/gui_riscos.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/gui_riscos.pro	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,66 ****
+- /* Prototypes for gui_riscos.c
+-  * Based on gui_x11_pro.h (10 March 2002 version)
+-  */
+- void gui_mch_prepare __ARGS((int *argc, char **argv));
+- int gui_mch_init_check __ARGS((void));
+- int gui_mch_init __ARGS((void));
+- void gui_mch_uninit __ARGS((void));
+- void gui_mch_new_colors __ARGS((void));
+- int gui_mch_open __ARGS((void));
+- void gui_init_tooltip_font __ARGS((void));
+- void gui_init_menu_font __ARGS((void));void gui_mch_exit __ARGS((int rc));
+- int gui_mch_get_winpos __ARGS((int *x, int *y));
+- void gui_mch_set_winpos __ARGS((int x, int y));
+- void gui_mch_set_shellsize __ARGS((int width, int height, int min_width, int min_height, int base_width, int base_height));
+- void gui_mch_get_screen_dimensions __ARGS((int *screen_w, int *screen_h));
+- int gui_mch_init_font __ARGS((char_u *font_name, int do_fontset));
+- GuiFont gui_mch_get_font __ARGS((char_u *name, int giveErrorIfMissing));
+- int gui_mch_adjust_charheight __ARGS((void));
+- void gui_mch_set_font __ARGS((GuiFont font));
+- void gui_mch_set_fontset __ARGS((GuiFontset fontset));
+- void gui_mch_free_font __ARGS((GuiFont font));
+- void gui_mch_free_fontset __ARGS((GuiFontset fontset));
+- GuiFontset gui_mch_get_fontset __ARGS((char_u *name, int giveErrorIfMissing, int fixed_width));
+- guicolor_T gui_mch_get_color __ARGS((char_u *reqname));
+- void gui_mch_set_fg_color __ARGS((guicolor_T color));
+- void gui_mch_set_bg_color __ARGS((guicolor_T color));
+- void gui_mch_draw_string __ARGS((int row, int col, char_u *s, int len, int flags));
+- int gui_mch_haskey __ARGS((char_u *name));
+- void gui_mch_beep __ARGS((void));
+- void gui_mch_flash __ARGS((int msec));
+- void gui_mch_invert_rectangle __ARGS((int r, int c, int nr, int nc));
+- void gui_mch_iconify __ARGS((void));
+- void gui_mch_set_foreground __ARGS((void));
+- void gui_mch_draw_hollow_cursor __ARGS((guicolor_T color));
+- void gui_mch_draw_part_cursor __ARGS((int w, int h, guicolor_T color));
+- void gui_mch_update __ARGS((void));
+- int gui_mch_wait_for_chars __ARGS((long wtime));
+- void gui_mch_flush __ARGS((void));
+- void gui_mch_clear_block __ARGS((int row1, int col1, int row2, int col2));
+- void gui_mch_clear_all __ARGS((void));
+- void gui_mch_delete_lines __ARGS((int row, int num_lines));
+- void gui_mch_insert_lines __ARGS((int row, int num_lines));
+- void clip_mch_lose_selection __ARGS((VimClipboard *cbd));
+- int clip_mch_own_selection __ARGS((VimClipboard *cbd));
+- void clip_mch_request_selection __ARGS((VimClipboard *cbd));
+- void clip_mch_set_selection __ARGS((VimClipboard *cbd));
+- void gui_mch_menu_grey __ARGS((vimmenu_T *menu, int grey));
+- void gui_mch_menu_hidden __ARGS((vimmenu_T *menu, int hidden));
+- void gui_mch_draw_menubar __ARGS((void));
+- void gui_mch_set_blinking __ARGS((long waittime, long on, long off));
+- void gui_mch_stop_blink __ARGS((void));
+- void gui_mch_start_blink __ARGS((void));
+- void process_event __ARGS((int event, int *block));
+- void gui_mch_show_popupmenu __ARGS((vimmenu_T *menu));
+- long_u gui_mch_get_rgb __ARGS((guicolor_T pixel));
+- void gui_mch_getmouse __ARGS((int *x, int *y));
+- void gui_mch_setmouse __ARGS((int x, int y));
+- void gui_mch_drawsign __ARGS((int row, int col, int typenr));
+- void gui_mch_destroy_sign __ARGS((XImage *sign));
+- void gui_mch_mousehide __ARGS((int hide));
+- void mch_set_mouse_shape __ARGS((int shape));
+- void gui_mch_menu_set_tip __ARGS((vimmenu_T *menu));
+- 
+- void ro_redraw_title __ARGS((int window));
+- int ro_ok_to_quit __ARGS((void));
+- /* vim: set ft=c : */
+--- 0 ----
+*** ../vim-7.3.187/src/proto/os_riscos.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/os_riscos.pro	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,49 ****
+- /* os_riscos.c */
+- void mch_write __ARGS((char_u *s, int len));
+- int mch_inchar __ARGS((char_u *buf, int maxlen, long wtime, int tb_change_cnt));
+- int mch_char_avail __ARGS((void));
+- long_u mch_avail_mem __ARGS((int special));
+- void mch_delay __ARGS((long msec, int ignoreinput));
+- void mch_suspend __ARGS((void));
+- void mch_init __ARGS((void));
+- int mch_check_win __ARGS((int argc, char **argv));
+- int mch_input_isatty __ARGS((void));
+- int mch_can_restore_title __ARGS((void));
+- int mch_can_restore_icon __ARGS((void));
+- void mch_settitle __ARGS((char_u *title, char_u *icon));
+- void mch_restore_title __ARGS((int which));
+- int mch_get_user_name __ARGS((char_u *s, int len));
+- void mch_get_host_name __ARGS((char_u *s, int len));
+- long mch_get_pid __ARGS((void));
+- int mch_dirname __ARGS((char_u *buf, int len));
+- int mch_FullName __ARGS((char_u *fname, char_u *buf, int len, int force));
+- int mch_isFullName __ARGS((char_u *fname));
+- long mch_getperm __ARGS((char_u *name));
+- int mch_setperm __ARGS((char_u *name, long perm));
+- void mch_hide __ARGS((char_u *name));
+- int mch_isdir __ARGS((char_u *name));
+- int mch_can_exe __ARGS((char_u *name));
+- int mch_nodetype __ARGS((char_u *name));
+- void mch_early_init __ARGS((void));
+- void mch_exit __ARGS((int r));
+- void mch_settmode __ARGS((int tmode));
+- void mch_setmouse __ARGS((int on));
+- int mch_screenmode __ARGS((char_u *arg));
+- int mch_get_shellsize __ARGS((void));
+- void mch_set_shellsize __ARGS((void));
+- void mch_new_shellsize __ARGS((void));
+- int mch_call_shell __ARGS((char_u *cmd, int options));
+- void mch_breakcheck __ARGS((void));
+- int mch_expandpath __ARGS((garray_T *gap, char_u *path, int flags));
+- int expand_section __ARGS((garray_T *gap, char_u *root, char_u *rest, int flags));
+- int mch_expand_wildcards __ARGS((int num_pat, char_u **pat, int *num_file, char_u ***file, int flags));
+- int mch_has_exp_wildcard __ARGS((char_u *p));
+- int mch_has_wildcard __ARGS((char_u *p));
+- int mch_remove __ARGS((char_u *file));
+- char_u *mch_munge_fname __ARGS((char_u *fname));
+- int ro_buflist_add __ARGS((char_u *old_name));
+- int mch_chdir __ARGS((char_u *dir));
+- void mch_read_filetype __ARGS((char_u *file));
+- void mch_set_filetype __ARGS((char_u *file, char_u *type));
+- int mch_check_filetype __ARGS((char_u *fname, char_u *type));
+- /* vim: set ft=c : */
+--- 0 ----
+*** ../vim-7.3.187/Filelist	2011-03-22 18:10:34.000000000 +0100
+--- Filelist	2011-05-10 17:19:21.000000000 +0200
+***************
+*** 428,435 ****
+  		README_os390.txt \
+  		src/Make_mint.mak \
+  		src/Make_ro.mak \
+- 		src/gui_riscos.c \
+- 		src/gui_riscos.h \
+  		src/if_sniff.c \
+  		src/infplist.xml \
+  		src/link.390 \
+--- 428,433 ----
+***************
+*** 437,446 ****
+  		src/os_beos.h \
+  		src/os_beos.rsrc \
+  		src/os_mint.h \
+- 		src/os_riscos.c \
+- 		src/os_riscos.h \
+- 		src/proto/gui_riscos.pro \
+- 		src/proto/os_riscos.pro \
+  		src/os_vms_fix.com \
+  		src/toolbar.phi \
+  
+--- 435,440 ----
+*** ../vim-7.3.187/src/version.c	2011-05-10 16:41:13.000000000 +0200
+--- src/version.c	2011-05-10 17:20:50.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     188,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+83. Batteries in the TV remote now last for months.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.189 b/source/ap/vim/patches/7.3.189
new file mode 100644
index 00000000..f7a9667c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.189
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.189
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.189 (after 7.3.186)
+Problem:    Can't build without +clipboard feature. (Christian Ebert)
+Solution:   Add the missing #ifdef.
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.188/src/normal.c	2011-05-10 16:12:40.000000000 +0200
+--- src/normal.c	2011-05-10 17:25:26.000000000 +0200
+***************
+*** 1204,1212 ****
+--- 1204,1215 ----
+  #ifdef FEAT_EVAL
+  	{
+  	    int regname = 0;
++ 
+  	    /* Adjust the register according to 'clipboard', so that when
+  	     * "unnamed" is present it becomes '*' or '+' instead of '"'. */
++ # ifdef FEAT_CLIPBOARD
+  	    adjust_clip_reg(&regname);
++ # endif
+  	    set_reg_var(regname);
+  	}
+  #endif
+*** ../vim-7.3.188/src/version.c	2011-05-10 17:21:34.000000000 +0200
+--- src/version.c	2011-05-10 17:29:21.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     189,
+  /**/
+
+-- 
+If your nose runs, and your feet smell, you might be upside down.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.190 b/source/ap/vim/patches/7.3.190
new file mode 100644
index 00000000..4adef8ab
--- /dev/null
+++ b/source/ap/vim/patches/7.3.190
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.190
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.190
+Problem:    When there is a "containedin" syntax argument highlighting may be
+	    wrong. (Radek)
+Solution:   Reset current_next_list. (Ben Schmidt)
+Files:	    src/syntax.c
+
+
+*** ../vim-7.3.189/src/syntax.c	2011-04-11 16:56:29.000000000 +0200
+--- src/syntax.c	2011-05-19 12:02:43.000000000 +0200
+***************
+*** 2566,2571 ****
+--- 2566,2574 ----
+  #endif
+  		update_si_attr(current_state.ga_len - 1);
+  
++ 		/* nextgroup= should not match in the end pattern */
++ 		current_next_list = NULL;
++ 
+  		/* what matches next may be different now, clear it */
+  		next_match_idx = 0;
+  		next_match_col = MAXCOL;
+*** ../vim-7.3.189/src/version.c	2011-05-10 17:29:28.000000000 +0200
+--- src/version.c	2011-05-19 12:13:28.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     190,
+  /**/
+
+-- 
+From "know your smileys":
+ :'-D	Laughing so much that they're crying
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.191 b/source/ap/vim/patches/7.3.191
new file mode 100644
index 00000000..14b63cea
--- /dev/null
+++ b/source/ap/vim/patches/7.3.191
@@ -0,0 +1,526 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.191
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.191
+Problem:    Still some RISC OS stuff to remove.
+Solution:   Remove files and lines. (Hong Xu)
+	    Remove the 'osfiletype' option code.
+Files:	    README_extra.txt, src/Make_ro.mak, src/INSTALL, src/Makefile,
+	    src/buffer.c, src/eval.c, src/feature.h, src/option.c,
+	    src/option.h, src/structs.h, src/version.c, src/pty.c, Filelist
+
+
+*** ../vim-7.3.190/README_extra.txt	2010-08-15 21:57:32.000000000 +0200
+--- README_extra.txt	2011-05-19 12:35:16.000000000 +0200
+***************
+*** 13,21 ****
+  
+  src/os_amiga.*		Files for the Amiga port.
+  
+- src/gui_riscos.*
+- src/os_riscos.*		Files for the RISC OS port.
+- 
+  src/gui_beos.*
+  src/os_beos.*		Files for the BeOS port.
+  
+--- 13,18 ----
+*** ../vim-7.3.190/src/Make_ro.mak	2010-08-15 21:57:27.000000000 +0200
+--- src/Make_ro.mak	1970-01-01 01:00:00.000000000 +0100
+***************
+*** 1,135 ****
+- #
+- # Makefile for Vim on RISC OS - Andy Wingate
+- #
+- 
+- GCC         = gcc -mthrowback
+- CFLAGS     = -DRISCOS -DFEAT_GUI
+- CC         = $(GCC) $(CFLAGS) -O2
+- # -DUP_BC_PC_EXTERN for term.c needed as BC defined in termlib.c and term.c
+- 
+- TERMFLAG   = -DUP_BC_PC_EXTERN
+- 
+- ASMFLAGS   = -throwback -objasm -gcc
+- 
+- OBJS =  o.buffer o.charset o.diff o.digraph o.edit o.eval o.ex_cmds o.ex_cmds2  \
+- 	o.ex_docmd o.ex_eval o.ex_getln o.fileio o.fold o.getchar \
+- 	o.hardcopy o.hashtab o.main o.mark o.mbyte  \
+- 	o.memfile o.memline o.menu o.message o.misc1 o.misc2 o.move     \
+- 	o.normal o.ops o.option o.popupmnu o.quickfix o.regexp o.screen \
+- 	o.search   \
+- 	o.spell o.syntax o.tag o.term o.termlib o.ui o.undo o.version	\
+- 	o.window o.os_riscos o.swis o.gui o.gui_riscos
+- 
+- Vim: $(OBJS)
+- 	$(GCC) -o Vim $(OBJS)
+- 
+- install: Vim
+- 	squeeze -v Vim @.!Vim.Vim
+- 
+- clean:	
+- 	create o.!fake! 0
+- 	wipe o.* ~cf
+- 	remove Vim
+- 
+- o.swis: s.swis
+- 	as $(ASMFLAGS) -o o.swis s.swis
+- 
+- # Rules for object files
+- 
+- o.%:	c.%
+- 	$(CC) -c $< -o $@
+- 
+- o.buffer:	c.buffer
+- 
+- o.charset:	c.charset
+- 
+- o.digraph:	c.digraph
+- 
+- o.diff:		c.diff
+- 
+- o.edit:		c.edit
+- 
+- o.eval:		c.eval
+- 
+- o.ex_cmds:	c.ex_cmds
+- 
+- o.ex_cmds2:	c.ex_cmds2
+- 
+- o.ex_docmd:	c.ex_docmd
+- 
+- o.ex_eval:	c.ex_eval
+- 
+- o.ex_getln:	c.ex_getln
+- 
+- o.fileio:	c.fileio
+- 
+- o.fold:		c.fold
+- 
+- o.getchar:	c.getchar
+- 
+- o.hardcopy:	c.hardcopy
+- 
+- o.hashtab:	c.hashtab
+- 
+- o.gui:		c.gui
+- 
+- o.gui_riscos:	c.gui_riscos
+- 
+- o.main:		c.main
+- 
+- o.mark:		c.mark
+- 
+- o.mbyte:	c.mbyte
+- 
+- o.memfile:	c.memfile
+- 
+- o.memline:	c.memline
+- 
+- o.menu:		c.menu
+- 
+- o.message:	c.message
+- 
+- o.misc1:	c.misc1
+- 
+- o.misc2:	c.misc2
+- 
+- o.move:		c.move
+- 
+- o.normal:	c.normal
+- 
+- o.ops:		c.ops
+- 
+- o.option:	c.option
+- 
+- o.os_riscos:	c.os_riscos
+- 
+- o.pty:		c.pty
+- 
+- o.popupmnu:	c.popupmnu
+- 
+- o.quickfix:	c.quickfix
+- 
+- o.regexp:	c.regexp
+- 
+- o.screen:	c.screen
+- 
+- o.search:	c.search
+- 
+- o.spell:	c.spell
+- 
+- o.syntax:	c.syntax
+- 
+- o.tag:		c.tag
+- 
+- o.term:		c.term
+- 	$(CC) $(TERMFLAG) -c c.term -o o.term
+- 
+- o.termlib:	c.termlib
+- 
+- o.ui:		c.ui
+- 
+- o.undo:		c.undo
+- 
+- o.version:	c.version
+- 
+- o.window:	c.window
+--- 0 ----
+*** ../vim-7.3.190/src/INSTALL	2010-08-15 21:57:28.000000000 +0200
+--- src/INSTALL	2011-05-19 12:36:17.000000000 +0200
+***************
+*** 6,14 ****
+  Contents:
+  1. Generic
+  2. Unix
+! 3. RISC OS
+! 4. OS/2 (with EMX 0.9b)
+! 5. Atari MiNT
+  
+  See INSTALLami.txt              for Amiga
+  See INSTALLmac.txt              for Macintosh
+--- 6,13 ----
+  Contents:
+  1. Generic
+  2. Unix
+! 3. OS/2 (with EMX 0.9b)
+! 4. Atari MiNT
+  
+  See INSTALLami.txt              for Amiga
+  See INSTALLmac.txt              for Macintosh
+***************
+*** 174,198 ****
+  	./configure --without-local-dir
+  
+  
+! 3. RISC OS
+! =============
+! 
+! Much file renaming is needed before you can compile anything.
+! You'll need UnixLib to link against, GCC and GNU make.
+! 
+! I suggest you get the RISC OS binary distribution, which includes the
+! Templates file and the loader.
+! 
+! Try here: http://www.ecs.soton.ac.uk/~tal197
+! 
+! Do
+!     :help riscos
+! 
+! within the editor for more information, or read the
+! ../runtime/doc/os_risc.txt help file.
+! 
+! 
+! 4. OS/2
+  =======
+  
+  Summary:
+--- 173,179 ----
+  	./configure --without-local-dir
+  
+  
+! 3. OS/2
+  =======
+  
+  Summary:
+***************
+*** 237,243 ****
+  Check ../runtime/doc/os_os2.txt for additional info on running Vim.
+  
+  
+! 5. Atari MiNT
+  =============
+  
+  [NOTE: this is quite old, it might not work anymore]
+--- 218,224 ----
+  Check ../runtime/doc/os_os2.txt for additional info on running Vim.
+  
+  
+! 4. Atari MiNT
+  =============
+  
+  [NOTE: this is quite old, it might not work anymore]
+*** ../vim-7.3.190/src/Makefile	2011-04-01 13:05:37.000000000 +0200
+--- src/Makefile	2011-05-19 12:37:52.000000000 +0200
+***************
+*** 29,35 ****
+  #	- Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
+  #	  want to disable using X11 libraries.	This speeds up starting Vim,
+  #	  but the window title will not be set and the X11 selection can not
+! #	  used.
+  #	- Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the
+  #	  X11 Session Management Protocol (XSMP) library (libSM) but do not
+  #	  want to use it.
+--- 29,35 ----
+  #	- Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
+  #	  want to disable using X11 libraries.	This speeds up starting Vim,
+  #	  but the window title will not be set and the X11 selection can not
+! #	  be used.
+  #	- Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the
+  #	  X11 Session Management Protocol (XSMP) library (libSM) but do not
+  #	  want to use it.
+***************
+*** 730,741 ****
+  ### USL for Unix Systems Laboratories (SYSV 4.2)
+  #EXTRA_DEFS = -DUSL
+  
+- ### RISCos on MIPS without X11
+- #EXTRA_DEFS = -DMIPS
+- 
+- ### RISCos on MIPS with X11
+- #EXTRA_LIBS = -lsun
+- 
+  ### (6)  A/UX 3.1.1 with gcc (Jim Jagielski)
+  #CC= gcc -D_POSIX_SOURCE
+  #CFLAGS= -O2
+--- 730,735 ----
+***************
+*** 1633,1639 ****
+  RSRC_DIR = os_mac_rsrc
+  
+  PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
+! 	os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
+  
+  # Default target is making the executable and tools
+  all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
+--- 1627,1633 ----
+  RSRC_DIR = os_mac_rsrc
+  
+  PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
+! 	os_mswin.pro os_beos.pro os_vms.pro $(PERL_PRO)
+  
+  # Default target is making the executable and tools
+  all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
+*** ../vim-7.3.190/src/buffer.c	2011-05-05 17:32:40.000000000 +0200
+--- src/buffer.c	2011-05-19 13:09:25.000000000 +0200
+***************
+*** 1808,1816 ****
+  #ifdef FEAT_AUTOCMD
+      clear_string_option(&buf->b_p_ft);
+  #endif
+- #ifdef FEAT_OSFILETYPE
+-     clear_string_option(&buf->b_p_oft);
+- #endif
+  #ifdef FEAT_CINDENT
+      clear_string_option(&buf->b_p_cink);
+      clear_string_option(&buf->b_p_cino);
+--- 1808,1813 ----
+*** ../vim-7.3.190/src/eval.c	2011-05-10 16:41:13.000000000 +0200
+--- src/eval.c	2011-05-19 13:09:43.000000000 +0200
+***************
+*** 12076,12084 ****
+  #ifdef FEAT_OLE
+  	"ole",
+  #endif
+- #ifdef FEAT_OSFILETYPE
+- 	"osfiletype",
+- #endif
+  #ifdef FEAT_PATH_EXTRA
+  	"path_extra",
+  #endif
+--- 12076,12081 ----
+*** ../vim-7.3.190/src/feature.h	2010-08-15 21:57:31.000000000 +0200
+--- src/feature.h	2011-05-19 13:09:56.000000000 +0200
+***************
+*** 506,520 ****
+  #endif
+  
+  /*
+-  * +osfiletype		filetype checking in autocommand patterns.
+-  *			Only on systems that support filetypes (RISC OS).
+-  */
+- #if 0
+- # define FEAT_OSFILETYPE
+- # define DFLT_OFT "Text"
+- #endif
+- 
+- /*
+   * +viminfo		reading/writing the viminfo file. Takes about 8Kbyte
+   *			of code.
+   * VIMINFO_FILE		Location of user .viminfo file (should start with $).
+--- 506,511 ----
+*** ../vim-7.3.190/src/option.c	2011-04-28 17:24:54.000000000 +0200
+--- src/option.c	2011-05-19 13:11:42.000000000 +0200
+***************
+*** 140,148 ****
+  #define PV_MOD		OPT_BUF(BV_MOD)
+  #define PV_MPS		OPT_BUF(BV_MPS)
+  #define PV_NF		OPT_BUF(BV_NF)
+- #ifdef FEAT_OSFILETYPE
+- # define PV_OFT		OPT_BUF(BV_OFT)
+- #endif
+  #ifdef FEAT_COMPL_FUNC
+  # define PV_OFU		OPT_BUF(BV_OFU)
+  #endif
+--- 140,145 ----
+***************
+*** 337,345 ****
+  static int	p_mod;
+  static char_u	*p_mps;
+  static char_u	*p_nf;
+- #ifdef FEAT_OSFILETYPE
+- static char_u	*p_oft;
+- #endif
+  static int	p_pi;
+  #ifdef FEAT_TEXTOBJ
+  static char_u	*p_qe;
+--- 334,339 ----
+***************
+*** 1901,1914 ****
+  			    (char_u *)NULL, PV_NONE,
+  			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
+      {"osfiletype",  "oft",  P_STRING|P_ALLOCED|P_VI_DEF,
+- #ifdef FEAT_OSFILETYPE
+- 			    (char_u *)&p_oft, PV_OFT,
+- 			    {(char_u *)DFLT_OFT, (char_u *)0L}
+- #else
+  			    (char_u *)NULL, PV_NONE,
+! 			    {(char_u *)0L, (char_u *)0L}
+! #endif
+! 			    SCRIPTID_INIT},
+      {"paragraphs",  "para", P_STRING|P_VI_DEF,
+  			    (char_u *)&p_para, PV_NONE,
+  			    {(char_u *)"IPLPPPQPP TPHPLIPpLpItpplpipbp",
+--- 1895,1902 ----
+  			    (char_u *)NULL, PV_NONE,
+  			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
+      {"osfiletype",  "oft",  P_STRING|P_ALLOCED|P_VI_DEF,
+  			    (char_u *)NULL, PV_NONE,
+! 			    {(char_u *)0L, (char_u *)0L} SCRIPTID_INIT},
+      {"paragraphs",  "para", P_STRING|P_VI_DEF,
+  			    (char_u *)&p_para, PV_NONE,
+  			    {(char_u *)"IPLPPPQPP TPHPLIPpLpItpplpipbp",
+***************
+*** 5282,5290 ****
+  #ifdef FEAT_AUTOCMD
+      check_string_option(&buf->b_p_ft);
+  #endif
+- #ifdef FEAT_OSFILETYPE
+-     check_string_option(&buf->b_p_oft);
+- #endif
+  #if defined(FEAT_SMARTINDENT) || defined(FEAT_CINDENT)
+      check_string_option(&buf->b_p_cinw);
+  #endif
+--- 5270,5275 ----
+***************
+*** 9665,9673 ****
+  	case PV_MA:	return (char_u *)&(curbuf->b_p_ma);
+  	case PV_MOD:	return (char_u *)&(curbuf->b_changed);
+  	case PV_NF:	return (char_u *)&(curbuf->b_p_nf);
+- #ifdef FEAT_OSFILETYPE
+- 	case PV_OFT:	return (char_u *)&(curbuf->b_p_oft);
+- #endif
+  	case PV_PI:	return (char_u *)&(curbuf->b_p_pi);
+  #ifdef FEAT_TEXTOBJ
+  	case PV_QE:	return (char_u *)&(curbuf->b_p_qe);
+--- 9650,9655 ----
+***************
+*** 10018,10026 ****
+  	    /* Don't copy 'filetype', it must be detected */
+  	    buf->b_p_ft = empty_option;
+  #endif
+- #ifdef FEAT_OSFILETYPE
+- 	    buf->b_p_oft = vim_strsave(p_oft);
+- #endif
+  	    buf->b_p_pi = p_pi;
+  #if defined(FEAT_SMARTINDENT) || defined(FEAT_CINDENT)
+  	    buf->b_p_cinw = vim_strsave(p_cinw);
+--- 10000,10005 ----
+*** ../vim-7.3.190/src/option.h	2011-02-12 13:59:55.000000000 +0100
+--- src/option.h	2011-05-19 13:11:46.000000000 +0200
+***************
+*** 984,992 ****
+      , BV_MOD
+      , BV_MPS
+      , BV_NF
+- #ifdef FEAT_OSFILETYPE
+-     , BV_OFT
+- #endif
+  #ifdef FEAT_COMPL_FUNC
+      , BV_OFU
+  #endif
+--- 984,989 ----
+*** ../vim-7.3.190/src/structs.h	2011-05-10 16:41:13.000000000 +0200
+--- src/structs.h	2011-05-19 13:11:58.000000000 +0200
+***************
+*** 1530,1538 ****
+      int		b_p_ml_nobin;	/* b_p_ml saved for binary mode */
+      int		b_p_ma;		/* 'modifiable' */
+      char_u	*b_p_nf;	/* 'nrformats' */
+- #ifdef FEAT_OSFILETYPE
+-     char_u	*b_p_oft;	/* 'osfiletype' */
+- #endif
+      int		b_p_pi;		/* 'preserveindent' */
+  #ifdef FEAT_TEXTOBJ
+      char_u	*b_p_qe;	/* 'quoteescape' */
+--- 1530,1535 ----
+*** ../vim-7.3.190/src/version.c	2011-05-19 12:14:03.000000000 +0200
+--- src/version.c	2011-05-19 13:26:42.000000000 +0200
+***************
+*** 426,436 ****
+  	"-ole",
+  # endif
+  #endif
+- #ifdef FEAT_OSFILETYPE
+- 	"+osfiletype",
+- #else
+- 	"-osfiletype",
+- #endif
+  #ifdef FEAT_PATH_EXTRA
+  	"+path_extra",
+  #else
+--- 426,431 ----
+*** ../vim-7.3.190/src/pty.c	2011-04-11 14:24:33.000000000 +0200
+--- src/pty.c	2011-05-19 12:43:26.000000000 +0200
+***************
+*** 123,130 ****
+  static void initmaster __ARGS((int));
+  
+  /*
+!  *  Open all ptys with O_NOCTTY, just to be on the safe side
+!  *  (RISCos mips breaks otherwise)
+   */
+  #ifndef O_NOCTTY
+  # define O_NOCTTY 0
+--- 123,129 ----
+  static void initmaster __ARGS((int));
+  
+  /*
+!  *  Open all ptys with O_NOCTTY, just to be on the safe side.
+   */
+  #ifndef O_NOCTTY
+  # define O_NOCTTY 0
+*** ../vim-7.3.190/Filelist	2011-05-10 17:21:34.000000000 +0200
+--- Filelist	2011-05-19 13:37:25.000000000 +0200
+***************
+*** 427,433 ****
+  		$(SRC_VMS) \
+  		README_os390.txt \
+  		src/Make_mint.mak \
+- 		src/Make_ro.mak \
+  		src/if_sniff.c \
+  		src/infplist.xml \
+  		src/link.390 \
+--- 427,432 ----
+*** ../vim-7.3.190/src/version.c	2011-05-19 12:14:03.000000000 +0200
+--- src/version.c	2011-05-19 13:26:42.000000000 +0200
+***************
+*** 716,717 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     191,
+  /**/
+
+-- 
+From "know your smileys":
+ :-&	Eating spaghetti
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.192 b/source/ap/vim/patches/7.3.192
new file mode 100644
index 00000000..5dab19b4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.192
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.192
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.192
+Problem:    Ex command ":s/ \?/ /g" splits multi-byte characters into bytes.
+	    (Dominique Pelle)
+Solution:   Advance over whole character instead of one byte.
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.191/src/ex_cmds.c	2011-05-10 16:41:13.000000000 +0200
+--- src/ex_cmds.c	2011-05-19 14:23:33.000000000 +0200
+***************
+*** 4625,4631 ****
+  			 * for a match in this line again. */
+  			skip_match = TRUE;
+  		    else
+! 			++matchcol; /* search for a match at next column */
+  		    goto skip;
+  		}
+  
+--- 4625,4639 ----
+  			 * for a match in this line again. */
+  			skip_match = TRUE;
+  		    else
+! 		    {
+! 			 /* search for a match at next column */
+! #ifdef FEAT_MBYTE
+! 			if (has_mbyte)
+! 			    matchcol += mb_ptr2len(sub_firstline + matchcol);
+! 			else
+! #endif
+! 			    ++matchcol;
+! 		    }
+  		    goto skip;
+  		}
+  
+*** ../vim-7.3.191/src/version.c	2011-05-19 13:40:47.000000000 +0200
+--- src/version.c	2011-05-19 14:28:44.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     192,
+  /**/
+
+-- 
+From "know your smileys":
+ :-F	Bucktoothed vampire with one tooth missing
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.193 b/source/ap/vim/patches/7.3.193
new file mode 100644
index 00000000..acee9ec0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.193
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.193
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.193
+Problem:    In the command line window ":close" doesn't work properly. (Tony
+	    Mechelynck)
+Solution:   Use Ctrl_C instead of K_IGNORE for cmdwin_result. (Jean-Rene
+	    David)
+Files:	    src/ex_docmd.c, src/ex_getln.c
+
+
+*** ../vim-7.3.192/src/ex_docmd.c	2011-05-10 16:41:13.000000000 +0200
+--- src/ex_docmd.c	2011-05-19 14:42:56.000000000 +0200
+***************
+*** 6472,6478 ****
+  {
+  # ifdef FEAT_CMDWIN
+      if (cmdwin_type != 0)
+! 	cmdwin_result = K_IGNORE;
+      else
+  # endif
+  	if (!text_locked()
+--- 6472,6478 ----
+  {
+  # ifdef FEAT_CMDWIN
+      if (cmdwin_type != 0)
+! 	cmdwin_result = Ctrl_C;
+      else
+  # endif
+  	if (!text_locked()
+*** ../vim-7.3.192/src/ex_getln.c	2011-04-28 17:21:49.000000000 +0200
+--- src/ex_getln.c	2011-05-19 14:42:56.000000000 +0200
+***************
+*** 6324,6329 ****
+--- 6324,6335 ----
+  	    ccline.cmdbuff = vim_strsave((char_u *)"qa");
+  	    cmdwin_result = CAR;
+  	}
++ 	else if (cmdwin_result == Ctrl_C)
++ 	{
++ 	    /* :q or :close, don't execute any command
++ 	     * and don't modify the cmd window. */
++ 	    ccline.cmdbuff = NULL;
++ 	}
+  	else
+  	    ccline.cmdbuff = vim_strsave(ml_get_curline());
+  	if (ccline.cmdbuff == NULL)
+*** ../vim-7.3.192/src/version.c	2011-05-19 14:30:07.000000000 +0200
+--- src/version.c	2011-05-19 14:48:12.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     193,
+  /**/
+
+-- 
+There's no place like $(HOME)!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.194 b/source/ap/vim/patches/7.3.194
new file mode 100644
index 00000000..5a73c009
--- /dev/null
+++ b/source/ap/vim/patches/7.3.194
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.194
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.194
+Problem:    When "b" is a symlink to directory "a", resolve("b/") doesn't
+	    result in "a/".  (ZyX)
+Solution:   Remove the trailing slash. (Jean-Rene David)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.193/src/eval.c	2011-05-19 13:40:47.000000000 +0200
+--- src/eval.c	2011-05-19 14:55:27.000000000 +0200
+***************
+*** 14980,14986 ****
+--- 14980,14989 ----
+  
+  	len = STRLEN(p);
+  	if (len > 0 && after_pathsep(p, p + len))
++ 	{
+  	    has_trailing_pathsep = TRUE;
++ 	    p[len - 1] = NUL; /* the trailing slash breaks readlink() */
++ 	}
+  
+  	q = getnextcomp(p);
+  	if (*q != NUL)
+*** ../vim-7.3.193/src/version.c	2011-05-19 14:50:49.000000000 +0200
+--- src/version.c	2011-05-19 14:54:40.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     194,
+  /**/
+
+-- 
+Momento mori, ergo carpe diem
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.195 b/source/ap/vim/patches/7.3.195
new file mode 100644
index 00000000..ba1fc219
--- /dev/null
+++ b/source/ap/vim/patches/7.3.195
@@ -0,0 +1,199 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.195
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.195
+Problem:    "} else" causes following lines to be indented too much. (Rouben
+	    Rostamian)
+Solution:   Better detection for the "else". (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.194/src/misc1.c	2011-05-10 16:41:13.000000000 +0200
+--- src/misc1.c	2011-05-19 16:30:28.000000000 +0200
+***************
+*** 5482,5489 ****
+   * Recognize a line that starts with '{' or '}', or ends with ';', ',', '{' or
+   * '}'.
+   * Don't consider "} else" a terminated line.
+!  * Don't consider a line where there are unmatched opening braces before '}',
+!  * ';' or ',' a terminated line.
+   * Return the character terminating the line (ending char's have precedence if
+   * both apply in order to determine initializations).
+   */
+--- 5482,5489 ----
+   * Recognize a line that starts with '{' or '}', or ends with ';', ',', '{' or
+   * '}'.
+   * Don't consider "} else" a terminated line.
+!  * If a line begins with an "else", only consider it terminated if no unmatched
+!  * opening braces follow (handle "else { foo();" correctly).
+   * Return the character terminating the line (ending char's have precedence if
+   * both apply in order to determine initializations).
+   */
+***************
+*** 5493,5513 ****
+      int		incl_open;	/* include '{' at the end as terminator */
+      int		incl_comma;	/* recognize a trailing comma */
+  {
+!     char_u found_start = 0;
+!     unsigned n_open = 0;
+  
+      s = cin_skipcomment(s);
+  
+      if (*s == '{' || (*s == '}' && !cin_iselse(s)))
+  	found_start = *s;
+  
+      while (*s)
+      {
+  	/* skip over comments, "" strings and 'c'haracters */
+  	s = skip_string(cin_skipcomment(s));
+  	if (*s == '}' && n_open > 0)
+  	    --n_open;
+! 	if (n_open == 0
+  		&& (*s == ';' || *s == '}' || (incl_comma && *s == ','))
+  		&& cin_nocode(s + 1))
+  	    return *s;
+--- 5493,5517 ----
+      int		incl_open;	/* include '{' at the end as terminator */
+      int		incl_comma;	/* recognize a trailing comma */
+  {
+!     char_u	found_start = 0;
+!     unsigned	n_open = 0;
+!     int		is_else = FALSE;
+  
+      s = cin_skipcomment(s);
+  
+      if (*s == '{' || (*s == '}' && !cin_iselse(s)))
+  	found_start = *s;
+  
++     if (!found_start)
++ 	is_else = cin_iselse(s);
++ 
+      while (*s)
+      {
+  	/* skip over comments, "" strings and 'c'haracters */
+  	s = skip_string(cin_skipcomment(s));
+  	if (*s == '}' && n_open > 0)
+  	    --n_open;
+! 	if ((!is_else || n_open == 0)
+  		&& (*s == ';' || *s == '}' || (incl_comma && *s == ','))
+  		&& cin_nocode(s + 1))
+  	    return *s;
+*** ../vim-7.3.194/src/testdir/test3.in	2011-05-10 13:38:23.000000000 +0200
+--- src/testdir/test3.in	2011-05-19 16:29:01.000000000 +0200
+***************
+*** 1345,1351 ****
+  
+  STARTTEST
+  :set cino&
+! 2kdd=][
+  ENDTEST
+  
+  void func(void)
+--- 1345,1351 ----
+  
+  STARTTEST
+  :set cino&
+! 2kdd=4][
+  ENDTEST
+  
+  void func(void)
+***************
+*** 1359,1364 ****
+--- 1359,1392 ----
+  	printf("Foo!\n");
+  }
+  
++ void func1(void)
++ {
++ 	char* tab[] = {"foo", "bar",
++ 		"baz", "quux",
++ 			"this line used", "to be indented incorrectly"};
++ 	foo();
++ }
++ 
++ void func2(void)
++ {
++ 	int tab[] =
++ 	{1, 2,
++ 		3, 4,
++ 		5, 6};
++ 
++ 		printf("This line used to be indented incorrectly.\n");
++ }
++ 
++ void func3(void)
++ {
++ 	int tab[] = {
++ 	1, 2,
++ 	3, 4,
++ 	5, 6};
++ 
++ printf("Don't you dare indent this line incorrectly!\n);
++ }
++ 
+  STARTTEST
+  :set cino&
+  2kdd=][
+*** ../vim-7.3.194/src/testdir/test3.ok	2011-05-10 13:38:23.000000000 +0200
+--- src/testdir/test3.ok	2011-05-19 16:29:01.000000000 +0200
+***************
+*** 1216,1221 ****
+--- 1216,1249 ----
+  	printf("Foo!\n");
+  }
+  
++ void func1(void)
++ {
++ 	char* tab[] = {"foo", "bar",
++ 		"baz", "quux",
++ 		"this line used", "to be indented incorrectly"};
++ 	foo();
++ }
++ 
++ void func2(void)
++ {
++ 	int tab[] =
++ 	{1, 2,
++ 		3, 4,
++ 		5, 6};
++ 
++ 	printf("This line used to be indented incorrectly.\n");
++ }
++ 
++ void func3(void)
++ {
++ 	int tab[] = {
++ 		1, 2,
++ 		3, 4,
++ 		5, 6};
++ 
++ 	printf("Don't you dare indent this line incorrectly!\n);
++ }
++ 
+  
+  void func(void)
+  {
+*** ../vim-7.3.194/src/version.c	2011-05-19 14:59:07.000000000 +0200
+--- src/version.c	2011-05-19 16:34:16.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     195,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for the taxes that I pay because it means that I am employed.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.196 b/source/ap/vim/patches/7.3.196
new file mode 100644
index 00000000..0d6be8c9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.196
@@ -0,0 +1,224 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.196
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.196
+Problem:    Can't intercept a character that is going to be inserted.
+Solution:   Add the InsertCharPre autocommand event. (Jakson A. Aquino)
+Files:	    runtime/doc/autocmd.txt, runtime/doc/eval.txt,
+	    runtime/doc/map.txt, src/edit.c, src/eval.c, src/fileio.c,
+	    src/vim.h
+
+
+*** ../mercurial/vim73/runtime/doc/autocmd.txt	2011-04-28 19:01:26.000000000 +0200
+--- runtime/doc/autocmd.txt	2011-05-19 17:12:17.000000000 +0200
+***************
+*** 299,304 ****
+--- 299,306 ----
+  |InsertEnter|		starting Insert mode
+  |InsertChange|		when typing <Insert> while in Insert or Replace mode
+  |InsertLeave|		when leaving Insert mode
++ |InsertCharPre|		when a character was typed in Insert mode, before
++ 			inserting it
+  
+  |ColorScheme|		after loading a color scheme
+  
+***************
+*** 657,662 ****
+--- 659,675 ----
+  				indicates the new mode.
+  				Be careful not to move the cursor or do
+  				anything else that the user does not expect.
++ 							*InsertCharPre*
++ InsertCharPre			When a character is typed in Insert mode,
++ 				before inserting the char.
++ 				The |v:char| variable indicates the char typed
++ 				and can be changed during the event to insert
++ 				a different character.  When |v:char| is set
++ 				to more than one character this text is
++ 				inserted literally.
++ 				It is not allowed to change the text |textlock|.
++ 				The event is not triggered when 'paste' is
++ 				set.
+  							*InsertEnter*
+  InsertEnter			Just before starting Insert mode.  Also for
+  				Replace mode and Virtual Replace mode.  The
+*** ../mercurial/vim73/runtime/doc/eval.txt	2011-05-19 12:22:41.000000000 +0200
+--- runtime/doc/eval.txt	2011-05-19 16:55:58.000000000 +0200
+***************
+*** 1293,1298 ****
+--- 1293,1299 ----
+  					*v:char* *char-variable*
+  v:char		Argument for evaluating 'formatexpr' and used for the typed
+  		character when using <expr> in an abbreviation |:map-<expr>|.
++ 		It is also used by the |InsertPreChar| event.
+  
+  			*v:charconvert_from* *charconvert_from-variable*
+  v:charconvert_from
+*** ../mercurial/vim73/runtime/doc/map.txt	2011-05-10 17:17:38.000000000 +0200
+--- runtime/doc/map.txt	2011-05-19 16:40:34.000000000 +0200
+***************
+*** 226,232 ****
+  
+  For abbreviations |v:char| is set to the character that was typed to trigger
+  the abbreviation.  You can use this to decide how to expand the {lhs}.  You
+! can't change v:char and you should not insert it.
+  
+  Be very careful about side effects!  The expression is evaluated while
+  obtaining characters, you may very well make the command dysfunctional.
+--- 226,232 ----
+  
+  For abbreviations |v:char| is set to the character that was typed to trigger
+  the abbreviation.  You can use this to decide how to expand the {lhs}.  You
+! you should not either insert or change the v:char.
+  
+  Be very careful about side effects!  The expression is evaluated while
+  obtaining characters, you may very well make the command dysfunctional.
+*** ../mercurial/vim73/src/edit.c	2011-05-10 14:22:10.000000000 +0200
+--- src/edit.c	2011-05-19 17:20:53.000000000 +0200
+***************
+*** 1381,1390 ****
+  		goto do_intr;
+  #endif
+  
+  	    /*
+  	     * Insert a nomal character.
+  	     */
+! normalchar:
+  #ifdef FEAT_SMARTINDENT
+  	    /* Try to perform smart-indenting. */
+  	    ins_try_si(c);
+--- 1381,1425 ----
+  		goto do_intr;
+  #endif
+  
++ normalchar:
+  	    /*
+  	     * Insert a nomal character.
+  	     */
+! #ifdef FEAT_AUTOCMD
+! 	    if (!p_paste)
+! 	    {
+! 		/* Trigger the InsertCharPre event.  Lock the text to avoid
+! 		 * weird things from happening. */
+! 		set_vim_var_char(c);
+! 		++textlock;
+! 		if (apply_autocmds(EVENT_INSERTCHARPRE, NULL, NULL,
+! 							       FALSE, curbuf))
+! 		{
+! 		    /* Get the new value of v:char.  If it is more than one
+! 		     * character insert it literally. */
+! 		    char_u *s = get_vim_var_str(VV_CHAR);
+! 		    if (MB_CHARLEN(s) > 1)
+! 		    {
+! 			if (stop_arrow() != FAIL)
+! 			{
+! 			    ins_str(s);
+! 			    AppendToRedobuffLit(s, -1);
+! 			}
+! 			c = NUL;
+! 		    }
+! 		    else
+! 			c = PTR2CHAR(s);
+! 		}
+! 
+! 		set_vim_var_string(VV_CHAR, NULL, -1);
+! 		--textlock;
+! 
+! 		/* If the new value is an empty string then don't insert a
+! 		 * char. */
+! 		if (c == NUL)
+! 		    break;
+! 	    }
+! #endif
+  #ifdef FEAT_SMARTINDENT
+  	    /* Try to perform smart-indenting. */
+  	    ins_try_si(c);
+***************
+*** 3491,3501 ****
+  	    return;
+      }
+      p += len;
+! #ifdef FEAT_MBYTE
+!     c = mb_ptr2char(p);
+! #else
+!     c = *p;
+! #endif
+      ins_compl_addleader(c);
+  }
+  
+--- 3526,3532 ----
+  	    return;
+      }
+      p += len;
+!     c = PTR2CHAR(p);
+      ins_compl_addleader(c);
+  }
+  
+*** ../mercurial/vim73/src/eval.c	2011-05-19 14:59:07.000000000 +0200
+--- src/eval.c	2011-05-19 16:40:39.000000000 +0200
+***************
+*** 352,358 ****
+      {VV_NAME("swapname",	 VAR_STRING), VV_RO},
+      {VV_NAME("swapchoice",	 VAR_STRING), 0},
+      {VV_NAME("swapcommand",	 VAR_STRING), VV_RO},
+!     {VV_NAME("char",		 VAR_STRING), VV_RO},
+      {VV_NAME("mouse_win",	 VAR_NUMBER), 0},
+      {VV_NAME("mouse_lnum",	 VAR_NUMBER), 0},
+      {VV_NAME("mouse_col",	 VAR_NUMBER), 0},
+--- 352,358 ----
+      {VV_NAME("swapname",	 VAR_STRING), VV_RO},
+      {VV_NAME("swapchoice",	 VAR_STRING), 0},
+      {VV_NAME("swapcommand",	 VAR_STRING), VV_RO},
+!     {VV_NAME("char",		 VAR_STRING), 0},
+      {VV_NAME("mouse_win",	 VAR_NUMBER), 0},
+      {VV_NAME("mouse_lnum",	 VAR_NUMBER), 0},
+      {VV_NAME("mouse_col",	 VAR_NUMBER), 0},
+*** ../mercurial/vim73/src/fileio.c	2011-05-10 16:41:13.000000000 +0200
+--- src/fileio.c	2011-05-19 16:40:39.000000000 +0200
+***************
+*** 7662,7667 ****
+--- 7662,7668 ----
+      {"InsertChange",	EVENT_INSERTCHANGE},
+      {"InsertEnter",	EVENT_INSERTENTER},
+      {"InsertLeave",	EVENT_INSERTLEAVE},
++     {"InsertCharPre",	EVENT_INSERTCHARPRE},
+      {"MenuPopup",	EVENT_MENUPOPUP},
+      {"QuickFixCmdPost",	EVENT_QUICKFIXCMDPOST},
+      {"QuickFixCmdPre",	EVENT_QUICKFIXCMDPRE},
+*** ../mercurial/vim73/src/vim.h	2011-05-10 16:41:13.000000000 +0200
+--- src/vim.h	2011-05-19 16:40:39.000000000 +0200
+***************
+*** 1274,1279 ****
+--- 1274,1280 ----
+      EVENT_WINENTER,		/* after entering a window */
+      EVENT_WINLEAVE,		/* before leaving a window */
+      EVENT_ENCODINGCHANGED,	/* after changing the 'encoding' option */
++     EVENT_INSERTCHARPRE,	/* before inserting a char */
+      EVENT_CURSORHOLD,		/* cursor in same position for a while */
+      EVENT_CURSORHOLDI,		/* idem, in Insert mode */
+      EVENT_FUNCUNDEFINED,	/* if calling a function which doesn't exist */
+*** ../vim-7.3.195/src/version.c	2011-05-19 16:35:05.000000000 +0200
+--- src/version.c	2011-05-19 17:15:41.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     196,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for the mess to clean after a party because it means I have
+been surrounded by friends.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.197 b/source/ap/vim/patches/7.3.197
new file mode 100644
index 00000000..c33a2cb2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.197
@@ -0,0 +1,78 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.197
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.197
+Problem:    When a QuickfixCmdPost event removes all errors, Vim still tries
+	    to jump to the first error, resulting in E42.
+Solution:   Get the number of error after the autocmd event. (Mike Lundy)
+Files:	    src/quickfix.c
+
+
+*** ../mercurial/vim73/src/quickfix.c	2011-05-10 16:41:13.000000000 +0200
+--- src/quickfix.c	2011-05-19 17:34:11.000000000 +0200
+***************
+*** 2813,2829 ****
+  					   (eap->cmdidx != CMD_grepadd
+  					    && eap->cmdidx != CMD_lgrepadd),
+  					   *eap->cmdlinep);
+  #ifdef FEAT_AUTOCMD
+      if (au_name != NULL)
+  	apply_autocmds(EVENT_QUICKFIXCMDPOST, au_name,
+  					       curbuf->b_fname, TRUE, curbuf);
+  #endif
+      if (res > 0 && !eap->forceit)
+-     {
+- 	if (wp != NULL)
+- 	    qi = GET_LOC_LIST(wp);
+  	qf_jump(qi, 0, 0, FALSE);		/* display first error */
+-     }
+  
+      mch_remove(fname);
+      vim_free(fname);
+--- 2813,2833 ----
+  					   (eap->cmdidx != CMD_grepadd
+  					    && eap->cmdidx != CMD_lgrepadd),
+  					   *eap->cmdlinep);
++     if (wp != NULL)
++ 	qi = GET_LOC_LIST(wp);
+  #ifdef FEAT_AUTOCMD
+      if (au_name != NULL)
++     {
+  	apply_autocmds(EVENT_QUICKFIXCMDPOST, au_name,
+  					       curbuf->b_fname, TRUE, curbuf);
++ 	if (qi->qf_curlist < qi->qf_listcount)
++ 	    res = qi->qf_lists[qi->qf_curlist].qf_count;
++ 	else
++ 	    res = 0;
++     }
+  #endif
+      if (res > 0 && !eap->forceit)
+  	qf_jump(qi, 0, 0, FALSE);		/* display first error */
+  
+      mch_remove(fname);
+      vim_free(fname);
+*** ../vim-7.3.196/src/version.c	2011-05-19 17:25:36.000000000 +0200
+--- src/version.c	2011-05-19 17:41:50.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     197,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for the clothes that fit a little too snug because it
+means I have more than enough to eat.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.198 b/source/ap/vim/patches/7.3.198
new file mode 100644
index 00000000..5ef4a8aa
--- /dev/null
+++ b/source/ap/vim/patches/7.3.198
@@ -0,0 +1,403 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.198
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.198
+Problem:    No completion for ":lang".
+Solution:   Get locales to complete from. (Dominique Pelle)
+Files:	    src/eval.c, src/ex_cmds2.c, src/ex_getln.c,
+	    src/proto/ex_cmds2.pro, src/proto/ex_getln.pro, src/vim.h
+
+
+*** ../mercurial/vim73/src/eval.c	2011-05-19 17:25:36.000000000 +0200
+--- src/eval.c	2011-05-19 17:52:02.000000000 +0200
+***************
+*** 911,916 ****
+--- 911,917 ----
+      hash_clear(&compat_hashtab);
+  
+      free_scriptnames();
++     free_locales();
+  
+      /* global variables */
+      vars_clear(&globvarht);
+*** ../mercurial/vim73/src/ex_cmds2.c	2011-05-10 16:41:13.000000000 +0200
+--- src/ex_cmds2.c	2011-05-19 18:16:54.000000000 +0200
+***************
+*** 1476,1482 ****
+  #endif
+  
+  /*
+!  * Ask the user what to do when abondoning a changed buffer.
+   * Must check 'write' option first!
+   */
+      void
+--- 1476,1482 ----
+  #endif
+  
+  /*
+!  * Ask the user what to do when abandoning a changed buffer.
+   * Must check 'write' option first!
+   */
+      void
+***************
+*** 4153,4158 ****
+--- 4153,4234 ----
+  }
+  
+  # if defined(FEAT_CMDL_COMPL) || defined(PROTO)
++ 
++ static char_u	**locales = NULL;	/* Array of all available locales */
++ static int	did_init_locales = FALSE;
++ 
++ static void init_locales __ARGS((void));
++ static char_u **find_locales __ARGS((void));
++ 
++ /*
++  * Lazy initialization of all available locales.
++  */
++     static void
++ init_locales()
++ {
++     if (!did_init_locales)
++     {
++ 	did_init_locales = TRUE;
++ 	locales = find_locales();
++     }
++ }
++ 
++ /* Return an array of strings for all available locales + NULL for the
++  * last element.  Return NULL in case of error. */
++     static char_u **
++ find_locales()
++ {
++     garray_T	locales_ga;
++     char_u	*loc;
++ 
++     /* Find all available locales by running command "locale -a".  If this
++      * doesn't work we won't have completion. */
++     char_u *locale_a = get_cmd_output((char_u *)"locale -a",
++ 							NULL, SHELL_SILENT);
++     if (locale_a == NULL)
++ 	return NULL;
++     ga_init2(&locales_ga, sizeof(char_u *), 20);
++ 
++     /* Transform locale_a string where each locale is separated by "\n"
++      * into an array of locale strings. */
++     loc = (char_u *)strtok((char *)locale_a, "\n");
++ 
++     while (loc != NULL)
++     {
++ 	if (ga_grow(&locales_ga, 1) == FAIL)
++ 	    break;
++ 	loc = vim_strsave(loc);
++ 	if (loc == NULL)
++ 	    break;
++ 
++ 	((char_u **)locales_ga.ga_data)[locales_ga.ga_len++] = loc;
++ 	loc = (char_u *)strtok(NULL, "\n");
++     }
++     vim_free(locale_a);
++     if (ga_grow(&locales_ga, 1) == FAIL)
++     {
++ 	ga_clear(&locales_ga);
++ 	return NULL;
++     }
++     ((char_u **)locales_ga.ga_data)[locales_ga.ga_len] = NULL;
++     return (char_u **)locales_ga.ga_data;
++ }
++ 
++ #  if defined(EXITFREE) || defined(PROTO)
++     void
++ free_locales()
++ {
++     int			i;
++     if (locales != NULL)
++     {
++ 	for (i = 0; locales[i] != NULL; i++)
++ 	    vim_free(locales[i]);
++ 	vim_free(locales);
++ 	locales = NULL;
++     }
++ }
++ #  endif
++ 
+  /*
+   * Function given to ExpandGeneric() to obtain the possible arguments of the
+   * ":language" command.
+***************
+*** 4168,4174 ****
+  	return (char_u *)"ctype";
+      if (idx == 2)
+  	return (char_u *)"time";
+!     return NULL;
+  }
+  # endif
+  
+--- 4244,4268 ----
+  	return (char_u *)"ctype";
+      if (idx == 2)
+  	return (char_u *)"time";
+! 
+!     init_locales();
+!     if (locales == NULL)
+! 	return NULL;
+!     return locales[idx - 3];
+! }
+! 
+! /*
+!  * Function given to ExpandGeneric() to obtain the available locales.
+!  */
+!     char_u *
+! get_locales(xp, idx)
+!     expand_T	*xp UNUSED;
+!     int		idx;
+! {
+!     init_locales();
+!     if (locales == NULL)
+! 	return NULL;
+!     return locales[idx];
+  }
+  # endif
+  
+*** ../mercurial/vim73/src/ex_getln.c	2011-05-19 14:50:49.000000000 +0200
+--- src/ex_getln.c	2011-05-19 18:18:49.000000000 +0200
+***************
+*** 4571,4618 ****
+  	    int		context;
+  	    char_u	*((*func)__ARGS((expand_T *, int)));
+  	    int		ic;
+  	} tab[] =
+  	{
+! 	    {EXPAND_COMMANDS, get_command_name, FALSE},
+! 	    {EXPAND_BEHAVE, get_behave_arg, TRUE},
+  #ifdef FEAT_USR_CMDS
+! 	    {EXPAND_USER_COMMANDS, get_user_commands, FALSE},
+! 	    {EXPAND_USER_CMD_FLAGS, get_user_cmd_flags, FALSE},
+! 	    {EXPAND_USER_NARGS, get_user_cmd_nargs, FALSE},
+! 	    {EXPAND_USER_COMPLETE, get_user_cmd_complete, FALSE},
+  #endif
+  #ifdef FEAT_EVAL
+! 	    {EXPAND_USER_VARS, get_user_var_name, FALSE},
+! 	    {EXPAND_FUNCTIONS, get_function_name, FALSE},
+! 	    {EXPAND_USER_FUNC, get_user_func_name, FALSE},
+! 	    {EXPAND_EXPRESSION, get_expr_name, FALSE},
+  #endif
+  #ifdef FEAT_MENU
+! 	    {EXPAND_MENUS, get_menu_name, FALSE},
+! 	    {EXPAND_MENUNAMES, get_menu_names, FALSE},
+  #endif
+  #ifdef FEAT_SYN_HL
+! 	    {EXPAND_SYNTAX, get_syntax_name, TRUE},
+  #endif
+! 	    {EXPAND_HIGHLIGHT, get_highlight_name, TRUE},
+  #ifdef FEAT_AUTOCMD
+! 	    {EXPAND_EVENTS, get_event_name, TRUE},
+! 	    {EXPAND_AUGROUP, get_augroup_name, TRUE},
+  #endif
+  #ifdef FEAT_CSCOPE
+! 	    {EXPAND_CSCOPE, get_cscope_name, TRUE},
+  #endif
+  #ifdef FEAT_SIGNS
+! 	    {EXPAND_SIGN, get_sign_name, TRUE},
+  #endif
+  #ifdef FEAT_PROFILE
+! 	    {EXPAND_PROFILE, get_profile_name, TRUE},
+  #endif
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+  	&& (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+! 	    {EXPAND_LANGUAGE, get_lang_arg, TRUE},
+  #endif
+! 	    {EXPAND_ENV_VARS, get_env_name, TRUE},
+  	};
+  	int	i;
+  
+--- 4571,4620 ----
+  	    int		context;
+  	    char_u	*((*func)__ARGS((expand_T *, int)));
+  	    int		ic;
++ 	    int		escaped;
+  	} tab[] =
+  	{
+! 	    {EXPAND_COMMANDS, get_command_name, FALSE, TRUE},
+! 	    {EXPAND_BEHAVE, get_behave_arg, TRUE, TRUE},
+  #ifdef FEAT_USR_CMDS
+! 	    {EXPAND_USER_COMMANDS, get_user_commands, FALSE, TRUE},
+! 	    {EXPAND_USER_CMD_FLAGS, get_user_cmd_flags, FALSE, TRUE},
+! 	    {EXPAND_USER_NARGS, get_user_cmd_nargs, FALSE, TRUE},
+! 	    {EXPAND_USER_COMPLETE, get_user_cmd_complete, FALSE, TRUE},
+  #endif
+  #ifdef FEAT_EVAL
+! 	    {EXPAND_USER_VARS, get_user_var_name, FALSE, TRUE},
+! 	    {EXPAND_FUNCTIONS, get_function_name, FALSE, TRUE},
+! 	    {EXPAND_USER_FUNC, get_user_func_name, FALSE, TRUE},
+! 	    {EXPAND_EXPRESSION, get_expr_name, FALSE, TRUE},
+  #endif
+  #ifdef FEAT_MENU
+! 	    {EXPAND_MENUS, get_menu_name, FALSE, TRUE},
+! 	    {EXPAND_MENUNAMES, get_menu_names, FALSE, TRUE},
+  #endif
+  #ifdef FEAT_SYN_HL
+! 	    {EXPAND_SYNTAX, get_syntax_name, TRUE, TRUE},
+  #endif
+! 	    {EXPAND_HIGHLIGHT, get_highlight_name, TRUE, TRUE},
+  #ifdef FEAT_AUTOCMD
+! 	    {EXPAND_EVENTS, get_event_name, TRUE, TRUE},
+! 	    {EXPAND_AUGROUP, get_augroup_name, TRUE, TRUE},
+  #endif
+  #ifdef FEAT_CSCOPE
+! 	    {EXPAND_CSCOPE, get_cscope_name, TRUE, TRUE},
+  #endif
+  #ifdef FEAT_SIGNS
+! 	    {EXPAND_SIGN, get_sign_name, TRUE, TRUE},
+  #endif
+  #ifdef FEAT_PROFILE
+! 	    {EXPAND_PROFILE, get_profile_name, TRUE, TRUE},
+  #endif
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+  	&& (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+! 	    {EXPAND_LANGUAGE, get_lang_arg, TRUE, FALSE},
+! 	    {EXPAND_LOCALES, get_locales, TRUE, FALSE},
+  #endif
+! 	    {EXPAND_ENV_VARS, get_env_name, TRUE, TRUE},
+  	};
+  	int	i;
+  
+***************
+*** 4626,4632 ****
+  	    {
+  		if (tab[i].ic)
+  		    regmatch.rm_ic = TRUE;
+! 		ret = ExpandGeneric(xp, &regmatch, num_file, file, tab[i].func);
+  		break;
+  	    }
+      }
+--- 4628,4635 ----
+  	    {
+  		if (tab[i].ic)
+  		    regmatch.rm_ic = TRUE;
+! 		ret = ExpandGeneric(xp, &regmatch, num_file, file,
+!                                                 tab[i].func, tab[i].escaped);
+  		break;
+  	    }
+      }
+***************
+*** 4648,4660 ****
+   * Returns OK when no problems encountered, FAIL for error (out of memory).
+   */
+      int
+! ExpandGeneric(xp, regmatch, num_file, file, func)
+      expand_T	*xp;
+      regmatch_T	*regmatch;
+      int		*num_file;
+      char_u	***file;
+      char_u	*((*func)__ARGS((expand_T *, int)));
+  					  /* returns a string from the list */
+  {
+      int		i;
+      int		count = 0;
+--- 4651,4664 ----
+   * Returns OK when no problems encountered, FAIL for error (out of memory).
+   */
+      int
+! ExpandGeneric(xp, regmatch, num_file, file, func, escaped)
+      expand_T	*xp;
+      regmatch_T	*regmatch;
+      int		*num_file;
+      char_u	***file;
+      char_u	*((*func)__ARGS((expand_T *, int)));
+  					  /* returns a string from the list */
++     int		escaped;
+  {
+      int		i;
+      int		count = 0;
+***************
+*** 4679,4685 ****
+  	    {
+  		if (round)
+  		{
+! 		    str = vim_strsave_escaped(str, (char_u *)" \t\\.");
+  		    (*file)[count] = str;
+  #ifdef FEAT_MENU
+  		    if (func == get_menu_names && str != NULL)
+--- 4683,4692 ----
+  	    {
+  		if (round)
+  		{
+! 		    if (escaped)
+! 			str = vim_strsave_escaped(str, (char_u *)" \t\\.");
+! 		    else
+! 			str = vim_strsave(str);
+  		    (*file)[count] = str;
+  #ifdef FEAT_MENU
+  		    if (func == get_menu_names && str != NULL)
+*** ../mercurial/vim73/src/proto/ex_cmds2.pro	2010-05-15 21:22:11.000000000 +0200
+--- src/proto/ex_cmds2.pro	2011-05-19 17:53:52.000000000 +0200
+***************
+*** 83,87 ****
+--- 83,89 ----
+  char_u *get_mess_lang __ARGS((void));
+  void set_lang_var __ARGS((void));
+  void ex_language __ARGS((exarg_T *eap));
++ void free_locales __ARGS((void));
+  char_u *get_lang_arg __ARGS((expand_T *xp, int idx));
++ char_u *get_locales __ARGS((expand_T *xp, int idx));
+  /* vim: set ft=c : */
+*** ../mercurial/vim73/src/proto/ex_getln.pro	2010-08-16 21:23:30.000000000 +0200
+--- src/proto/ex_getln.pro	2011-05-19 17:54:00.000000000 +0200
+***************
+*** 31,37 ****
+  char_u *addstar __ARGS((char_u *fname, int len, int context));
+  void set_cmd_context __ARGS((expand_T *xp, char_u *str, int len, int col));
+  int expand_cmdline __ARGS((expand_T *xp, char_u *str, int col, int *matchcount, char_u ***matches));
+! int ExpandGeneric __ARGS((expand_T *xp, regmatch_T *regmatch, int *num_file, char_u ***file, char_u *((*func)(expand_T *, int))));
+  char_u *globpath __ARGS((char_u *path, char_u *file, int expand_options));
+  void init_history __ARGS((void));
+  int get_histtype __ARGS((char_u *name));
+--- 31,37 ----
+  char_u *addstar __ARGS((char_u *fname, int len, int context));
+  void set_cmd_context __ARGS((expand_T *xp, char_u *str, int len, int col));
+  int expand_cmdline __ARGS((expand_T *xp, char_u *str, int col, int *matchcount, char_u ***matches));
+! int ExpandGeneric __ARGS((expand_T *xp, regmatch_T *regmatch, int *num_file, char_u ***file, char_u *((*func)(expand_T *, int)), int escaped));
+  char_u *globpath __ARGS((char_u *path, char_u *file, int expand_options));
+  void init_history __ARGS((void));
+  int get_histtype __ARGS((char_u *name));
+*** ../mercurial/vim73/src/vim.h	2011-05-19 17:25:36.000000000 +0200
+--- src/vim.h	2011-05-19 17:52:02.000000000 +0200
+***************
+*** 779,784 ****
+--- 779,785 ----
+  #define EXPAND_FILETYPE		37
+  #define EXPAND_FILES_IN_PATH	38
+  #define EXPAND_OWNSYNTAX	39
++ #define EXPAND_LOCALES		40
+  
+  /* Values for exmode_active (0 is no exmode) */
+  #define EXMODE_NORMAL		1
+*** ../vim-7.3.197/src/version.c	2011-05-19 17:42:54.000000000 +0200
+--- src/version.c	2011-05-19 18:24:58.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     198,
+  /**/
+
+-- 
+The primary purpose of the DATA statement is to give names to constants;
+instead of referring to pi as 3.141592653589793 at every appearance, the
+variable PI can be given that value with a DATA statement and used instead
+of the longer form of the constant.  This also simplifies modifying the
+program, should the value of pi change.
+	-- FORTRAN manual for Xerox Computers
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.199 b/source/ap/vim/patches/7.3.199
new file mode 100644
index 00000000..8bdd97ab
--- /dev/null
+++ b/source/ap/vim/patches/7.3.199
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.199
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.199
+Problem:    MS-Windows: Compilation problem of OLE with MingW compiler.
+Solution:   Put #ifdef around declarations. (Guopeng Wen)
+Files:	    src/if_ole.h
+
+
+*** ../mercurial/vim73/src/if_ole.h	2010-05-15 21:22:11.000000000 +0200
+--- src/if_ole.h	2011-05-25 12:05:50.000000000 +0200
+***************
+*** 46,53 ****
+  /* header files for imported files */
+  #include "oaidl.h"
+  
+! void __RPC_FAR * __RPC_USER MIDL_user_allocate(size_t);
+! void __RPC_USER MIDL_user_free( void __RPC_FAR * );
+  
+  #ifndef __IVim_INTERFACE_DEFINED__
+  #define __IVim_INTERFACE_DEFINED__
+--- 46,56 ----
+  /* header files for imported files */
+  #include "oaidl.h"
+  
+! #ifndef __MIDL_user_allocate_free_DEFINED__
+! #define __MIDL_user_allocate_free_DEFINED__
+!     void __RPC_FAR * __RPC_USER MIDL_user_allocate(size_t);
+!     void __RPC_USER MIDL_user_free( void __RPC_FAR * );
+! #endif
+  
+  #ifndef __IVim_INTERFACE_DEFINED__
+  #define __IVim_INTERFACE_DEFINED__
+*** ../vim-7.3.198/src/version.c	2011-05-19 18:26:34.000000000 +0200
+--- src/version.c	2011-05-25 12:08:54.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     199,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+104. When people ask about the Presidential Election you ask "Which country?"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.200 b/source/ap/vim/patches/7.3.200
new file mode 100644
index 00000000..60194711
--- /dev/null
+++ b/source/ap/vim/patches/7.3.200
@@ -0,0 +1,75 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.200
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.200 (after 7.3.198)
+Problem:    CTRL-D doesn't complete :lang.
+Solution:   Add the missing part of the change. (Dominique Pelle)
+Files:	    src/ex_docmd.c
+
+
+*** ../mercurial/vim73/src/ex_docmd.c	2011-05-19 14:50:49.000000000 +0200
+--- src/ex_docmd.c	2011-05-25 12:45:02.000000000 +0200
+***************
+*** 3861,3873 ****
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+  	&& (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+  	case CMD_language:
+! 	    if (*skiptowhite(arg) == NUL)
+  	    {
+  		xp->xp_context = EXPAND_LANGUAGE;
+  		xp->xp_pattern = arg;
+  	    }
+  	    else
+! 		xp->xp_context = EXPAND_NOTHING;
+  	    break;
+  #endif
+  #if defined(FEAT_PROFILE)
+--- 3861,3884 ----
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+  	&& (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+  	case CMD_language:
+! 	    p = skiptowhite(arg);
+! 	    if (*p == NUL)
+  	    {
+  		xp->xp_context = EXPAND_LANGUAGE;
+  		xp->xp_pattern = arg;
+  	    }
+  	    else
+! 	    {
+! 		if ( STRNCMP(arg, "messages", p - arg) == 0
+! 		  || STRNCMP(arg, "ctype", p - arg) == 0
+! 		  || STRNCMP(arg, "time", p - arg) == 0)
+! 		{
+! 		    xp->xp_context = EXPAND_LOCALES;
+! 		    xp->xp_pattern = skipwhite(p);
+! 		}
+! 		else
+! 		    xp->xp_context = EXPAND_NOTHING;
+! 	    }
+  	    break;
+  #endif
+  #if defined(FEAT_PROFILE)
+*** ../vim-7.3.199/src/version.c	2011-05-25 12:09:46.000000000 +0200
+--- src/version.c	2011-05-25 12:49:49.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     200,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+105. When someone asks you for your address, you tell them your URL.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.201 b/source/ap/vim/patches/7.3.201
new file mode 100644
index 00000000..0481afd8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.201
@@ -0,0 +1,124 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.201
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.201 (after 7.3.195)
+Problem:    "} else" still causes following lines to be indented too much.
+Solution:   Better detection for the "else" block. (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../mercurial/vim73/src/misc1.c	2011-05-19 16:35:05.000000000 +0200
+--- src/misc1.c	2011-05-25 13:29:45.000000000 +0200
+***************
+*** 7541,7557 ****
+  
+  			/*
+  			 * When searching for a terminated line, don't use the
+! 			 * one between the "if" and the "else".
+  			 * Need to use the scope of this "else".  XXX
+  			 * If whilelevel != 0 continue looking for a "do {".
+  			 */
+! 			if (cin_iselse(l)
+! 				&& whilelevel == 0
+! 				&& ((trypos = find_start_brace(ind_maxcomment))
+! 								    == NULL
+  				    || find_match(LOOKFOR_IF, trypos->lnum,
+! 					ind_maxparen, ind_maxcomment) == FAIL))
+! 			    break;
+  		    }
+  
+  		    /*
+--- 7541,7565 ----
+  
+  			/*
+  			 * When searching for a terminated line, don't use the
+! 			 * one between the "if" and the matching "else".
+  			 * Need to use the scope of this "else".  XXX
+  			 * If whilelevel != 0 continue looking for a "do {".
+  			 */
+! 			if (cin_iselse(l) && whilelevel == 0)
+! 			{
+! 			    /* If we're looking at "} else", let's make sure we
+! 			     * find the opening brace of the enclosing scope,
+! 			     * not the one from "if () {". */
+! 			    if (*l == '}')
+! 				curwin->w_cursor.col =
+! 						   (l - ml_get_curline()) + 1;
+! 
+! 			    if ((trypos = find_start_brace(ind_maxcomment))
+! 								       == NULL
+  				    || find_match(LOOKFOR_IF, trypos->lnum,
+! 					ind_maxparen, ind_maxcomment) == FAIL)
+! 				break;
+! 			}
+  		    }
+  
+  		    /*
+*** ../mercurial/vim73/src/testdir/test3.in	2011-05-19 16:35:05.000000000 +0200
+--- src/testdir/test3.in	2011-05-25 13:23:51.000000000 +0200
+***************
+*** 1413,1418 ****
+--- 1413,1433 ----
+  }
+  
+  STARTTEST
++ :set cino&
++ 2kdd=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	for (int i = 0; i < 10; ++i)
++ 		if (i & 1) {
++ 			foo(1);
++ 		} else
++ 			foo(0);
++ baz();
++ }
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../mercurial/vim73/src/testdir/test3.ok	2011-05-19 16:35:05.000000000 +0200
+--- src/testdir/test3.ok	2011-05-25 13:23:51.000000000 +0200
+***************
+*** 1262,1264 ****
+--- 1262,1275 ----
+  	foo();
+  }
+  
++ 
++ void func(void)
++ {
++ 	for (int i = 0; i < 10; ++i)
++ 		if (i & 1) {
++ 			foo(1);
++ 		} else
++ 			foo(0);
++ 	baz();
++ }
++ 
+*** ../vim-7.3.200/src/version.c	2011-05-25 12:51:17.000000000 +0200
+--- src/version.c	2011-05-25 13:33:16.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     201,
+  /**/
+
+-- 
+Laughing helps. It's like jogging on the inside.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.202 b/source/ap/vim/patches/7.3.202
new file mode 100644
index 00000000..1289e085
--- /dev/null
+++ b/source/ap/vim/patches/7.3.202
@@ -0,0 +1,868 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.202
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.202
+Problem:    Cannot influence the indent inside a namespace.
+Solution:   Add the "N" 'cino' parameter. (Konstantin Lepa)
+Files:      runtime/doc/indent.txt, src/misc1.c, src/testdir/test3.in,
+            src/testdir/test3.ok
+
+
+*** ../mercurial/vim73/runtime/doc/indent.txt	2011-04-28 19:01:26.000000000 +0200
+--- runtime/doc/indent.txt	2011-05-25 14:35:37.000000000 +0200
+***************
+*** 128,140 ****
+  used CTRL-T or CTRL-D.
+  
+  						*cinoptions-values*
+! The 'cinoptions' option sets how Vim performs indentation.  In the list below,
+  "N" represents a number of your choice (the number can be negative).  When
+  there is an 's' after the number, Vim multiplies the number by 'shiftwidth':
+  "1s" is 'shiftwidth', "2s" is two times 'shiftwidth', etc.  You can use a
+! decimal point, too: "-0.5s" is minus half a 'shiftwidth'.  The examples below
+! assume a 'shiftwidth' of 4.
+! 
+  	>N    Amount added for "normal" indent.  Used after a line that should
+  	      increase the indent (lines starting with "if", an opening brace,
+  	      etc.).  (default 'shiftwidth').
+--- 128,147 ----
+  used CTRL-T or CTRL-D.
+  
+  						*cinoptions-values*
+! The 'cinoptions' option sets how Vim performs indentation.  The value after
+! the option character can be one of these (N is any number):
+! 	N	indent N spaces
+! 	-N	indent N spaces to the left
+! 	Ns	N times 'shiftwidth spaces
+! 	-Ns	N times 'shiftwidth spaces to the left
+! 
+! In the list below,
+  "N" represents a number of your choice (the number can be negative).  When
+  there is an 's' after the number, Vim multiplies the number by 'shiftwidth':
+  "1s" is 'shiftwidth', "2s" is two times 'shiftwidth', etc.  You can use a
+! decimal point, too: "-0.5s" is minus half a 'shiftwidth'.
+! The examples below assume a 'shiftwidth' of 4.
+! 							*cino->*
+  	>N    Amount added for "normal" indent.  Used after a line that should
+  	      increase the indent (lines starting with "if", an opening brace,
+  	      etc.).  (default 'shiftwidth').
+***************
+*** 145,150 ****
+--- 152,158 ----
+  		      foo;		foo;			  foo;
+  		  }		      }			  }
+  <
++ 							*cino-e*
+  	eN    Add N to the prevailing indent inside a set of braces if the
+  	      opening brace at the End of the line (more precise: is not the
+  	      first character in a line).  This is useful if you want a
+***************
+*** 160,165 ****
+--- 168,174 ----
+  		      bar;		  bar;		      bar;
+  		  }		      }			  }
+  <
++ 							*cino-n*
+  	nN    Add N to the prevailing indent for a statement after an "if",
+  	      "while", etc., if it is NOT inside a set of braces.  This is
+  	      useful if you want a different indent when there is no '{'
+***************
+*** 174,179 ****
+--- 183,189 ----
+  		      bar;		  bar;		      bar;
+  		  }		      }			  }
+  <
++ 							*cino-f*
+  	fN    Place the first opening brace of a function or other block in
+  	      column N.  This applies only for an opening brace that is not
+  	      inside other braces and is at the start of the line.  What comes
+***************
+*** 184,189 ****
+--- 194,200 ----
+  		  {			{		      {
+  		      int foo;		    int foo;		  int foo;
+  <
++ 							*cino-{*
+  	{N    Place opening braces N characters from the prevailing indent.
+  	      This applies only for opening braces that are inside other
+  	      braces.  (default 0).
+***************
+*** 193,198 ****
+--- 204,210 ----
+  		  {			{		      {
+  		      foo;		  foo;		      foo;
+  <
++ 							*cino-}*
+  	}N    Place closing braces N characters from the matching opening
+  	      brace.  (default 0).
+  
+***************
+*** 202,207 ****
+--- 214,220 ----
+  		      foo;		  foo;		      foo;
+  		  }		      }			    }
+  <
++ 							*cino-^*
+  	^N    Add N to the prevailing indent inside a set of braces if the
+  	      opening brace is in column 0.  This can specify a different
+  	      indent for whole of a function (some may like to set it to a
+***************
+*** 216,221 ****
+--- 229,235 ----
+  		      }			}		  }
+  		  }		      }			  }
+  <
++ 							*cino-L*
+  	LN    Controls placement of jump labels. If N is negative, the label
+  	      will be placed at column 1. If N is non-negative, the indent of
+  	      the label will be the prevailing indent minus N.  (default -1).
+***************
+*** 229,234 ****
+--- 243,249 ----
+  		      }                   }                   }
+  		  }                   }                   }
+  <
++ 							*cino-:*
+  	:N    Place case labels N characters from the indent of the switch().
+  	      (default 'shiftwidth').
+  
+***************
+*** 240,245 ****
+--- 255,261 ----
+  		      default:	      default:
+  		  }		      }
+  <
++ 							*cino-=*
+  	=N    Place statements occurring after a case label N characters from
+  	      the indent of the label.  (default 'shiftwidth').
+  
+***************
+*** 247,252 ****
+--- 263,269 ----
+  		   case 11:		case 11:  a = a + 1;
+  		       a = a + 1;		  b = b + 1;
+  <
++ 							*cino-l*
+  	lN    If N != 0 Vim will align with a case label instead of the
+  	      statement after it in the same line.
+  
+***************
+*** 256,261 ****
+--- 273,279 ----
+  				    break;	      break;
+  				}		  }
+  <
++ 							*cino-b*
+  	bN    If N != 0 Vim will align a final "break" with the case label,
+  	      so that case..break looks like a sort of block.  (default: 0).
+  	      When using 1, consider adding "0=break" to 'cinkeys'.
+***************
+*** 272,277 ****
+--- 290,296 ----
+  			  break;	  break;
+  		  }		      }
+  <
++ 							*cino-g*
+  	gN    Place C++ scope declarations N characters from the indent of the
+  	      block they are in.  (default 'shiftwidth').  A scope declaration
+  	      can be "public:", "protected:" or "private:".
+***************
+*** 283,288 ****
+--- 302,308 ----
+  		      private:	      private:
+  		  }		      }
+  <
++ 							*cino-h*
+  	hN    Place statements occurring after a C++ scope declaration N
+  	      characters from the indent of the label.  (default
+  	      'shiftwidth').
+***************
+*** 291,296 ****
+--- 311,331 ----
+  		   public:		public:   a = a + 1;
+  		       a = a + 1;		  b = b + 1;
+  <
++ 							*cino-N*
++ 	NN    Indent inside C++ namespace N characters extra compared to a
++ 	      normal block.  (default 0).
++ 
++ 		cino=			   cino=N-s >
++ 		  namespace {                namespace {
++ 		      void function();       void function();
++ 		  }                          }
++ 
++ 		  namespace my               namespace my
++ 		  {                          {
++ 		      void function();       void function();
++ 		  }                          }
++ <
++ 							*cino-p*
+  	pN    Parameter declarations for K&R-style function declarations will
+  	      be indented N characters from the margin.  (default
+  	      'shiftwidth').
+***************
+*** 300,305 ****
+--- 335,341 ----
+  		      int a;	      int a;			  int a;
+  		      char b;	      char b;			  char b;
+  <
++ 							*cino-t*
+  	tN    Indent a function return type declaration N characters from the
+  	      margin.  (default 'shiftwidth').
+  
+***************
+*** 307,312 ****
+--- 343,349 ----
+  		      int	      int			 int
+  		  func()	      func()		  func()
+  <
++ 							*cino-i*
+  	iN    Indent C++ base class declarations and constructor
+  	      initializations, if they start in a new line (otherwise they
+  	      are aligned at the right side of the ':').
+***************
+*** 330,335 ****
+--- 368,374 ----
+  		  a = b + 9 *		    a = b + 9 *
+  		      c;			      c;
+  <
++ 							*cino-c*
+  	cN    Indent comment lines after the comment opener, when there is no
+  	      other text with which to align, N characters from the comment
+  	      opener.  (default 3).  See also |format-comments|.
+***************
+*** 339,344 ****
+--- 378,384 ----
+  		     text.			 text.
+  		   */			     */
+  <
++ 							*cino-C*
+  	CN    When N is non-zero, indent comment lines by the amount specified
+  	      with the c flag above even if there is other text behind the
+  	      comment opener.  (default 0).
+***************
+*** 349,360 ****
+--- 389,402 ----
+  		  ********/		    ********/
+  <	      (Example uses ":set comments& comments-=s1:/* comments^=s0:/*")
+  
++ 							*cino-/*
+  	/N    Indent comment lines N characters extra.  (default 0).
+  		cino=			  cino=/4 >
+  		  a = b;		    a = b;
+  		  /* comment */			/* comment */
+  		  c = d;		    c = d;
+  <
++ 							*cino-(*
+  	(N    When in unclosed parentheses, indent N characters from the line
+  	      with the unclosed parentheses.  Add a 'shiftwidth' for every
+  	      unclosed parentheses.  When N is 0 or the unclosed parentheses
+***************
+*** 370,375 ****
+--- 412,418 ----
+  			  (c2 || c3))		(c2 || c3))
+  		     {			       {
+  <
++ 							*cino-u*
+  	uN    Same as (N, but for one level deeper.  (default 'shiftwidth').
+  
+  		cino=			  cino=u2 >
+***************
+*** 377,382 ****
+--- 420,426 ----
+  			  && (c22345		    && (c22345
+  			      || c3))		      || c3))
+  <
++ 							*cino-U*
+  	UN    When N is non-zero, do not ignore the indenting specified by
+  	      ( or u in case that the unclosed parentheses is the first
+  	      non-white character in its line.  (default 0).
+***************
+*** 388,393 ****
+--- 432,438 ----
+  		       c3			    c3
+  		      ) && c4;			) && c4;
+  <
++ 							*cino-2*
+  	wN    When in unclosed parentheses and N is non-zero and either
+  	      using "(0" or "u0", respectively, or using "U0" and the unclosed
+  	      parentheses is the first non-white character in its line, line
+***************
+*** 400,405 ****
+--- 445,451 ----
+  				|| c3))		    || c3))
+  		      foo;			foo;
+  <
++ 							*cino-W*
+  	WN    When in unclosed parentheses and N is non-zero and either
+  	      using "(0" or "u0", respectively and the unclosed parentheses is
+  	      the last non-white character in its line and it is not the
+***************
+*** 414,419 ****
+--- 460,466 ----
+  		  a_short_line(argument,    a_short_line(argument,
+  			       argument);		 argument);
+  <
++ 							*cino-m*
+  	mN    When N is non-zero, line up a line starting with a closing
+  	      parentheses with the first character of the line with the
+  	      matching opening parentheses.  (default 0).
+***************
+*** 428,433 ****
+--- 475,481 ----
+  		     )			    )
+  		      foo;			foo;
+  <
++ 							*cino-M*
+  	MN    When N is non-zero, line up a line starting with a closing
+  	      parentheses with the first character of the previous line.
+  	      (default 0).
+***************
+*** 437,443 ****
+  			 cond2			   cond2
+  		     )				   )
+  <
+! 					*java-cinoptions* *java-indenting*
+  	jN    Indent java anonymous classes correctly.  The value 'N' is
+  	      currently unused but must be non-zero (e.g. 'j1').  'j1' will
+  	      indent for example the following code snippet correctly: >
+--- 485,491 ----
+  			 cond2			   cond2
+  		     )				   )
+  <
+! 				*java-cinoptions* *java-indenting* *cino-j*
+  	jN    Indent java anonymous classes correctly.  The value 'N' is
+  	      currently unused but must be non-zero (e.g. 'j1').  'j1' will
+  	      indent for example the following code snippet correctly: >
+***************
+*** 448,454 ****
+  		    }
+  		});
+  <
+! 				*javascript-cinoptions* *javascript-indenting*
+  	JN    Indent JavaScript object declarations correctly by not confusing
+  	      them with labels.  The value 'N' is currently unused but must be 
+  	      non-zero (e.g. 'J1'). >
+--- 496,502 ----
+  		    }
+  		});
+  <
+! 			*javascript-cinoptions* *javascript-indenting* *cino-J*
+  	JN    Indent JavaScript object declarations correctly by not confusing
+  	      them with labels.  The value 'N' is currently unused but must be 
+  	      non-zero (e.g. 'J1'). >
+***************
+*** 483,489 ****
+  
+  
+  The defaults, spelled out in full, are:
+! 	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,ps,ts,is,+s,
+  			c3,C0,/0,(2s,us,U0,w0,W0,m0,j0,J0,)20,*70,#0
+  
+  Vim puts a line in column 1 if:
+--- 534,540 ----
+  
+  
+  The defaults, spelled out in full, are:
+! 	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+  			c3,C0,/0,(2s,us,U0,w0,W0,m0,j0,J0,)20,*70,#0
+  
+  Vim puts a line in column 1 if:
+*** ../mercurial/vim73/src/misc1.c	2011-05-25 13:33:59.000000000 +0200
+--- src/misc1.c	2011-05-25 14:57:31.000000000 +0200
+***************
+*** 4959,4964 ****
+--- 4959,4965 ----
+  static int	corr_ind_maxparen __ARGS((int ind_maxparen, pos_T *startpos));
+  static int	find_last_paren __ARGS((char_u *l, int start, int end));
+  static int	find_match __ARGS((int lookfor, linenr_T ourscope, int ind_maxparen, int ind_maxcomment));
++ static int	cin_is_cpp_namespace __ARGS((char_u *));
+  
+  static int	ind_hash_comment = 0;   /* # starts a comment */
+  
+***************
+*** 5221,5226 ****
+--- 5222,5271 ----
+      return (*(s = cin_skipcomment(s + i)) == ':' && s[1] != ':');
+  }
+  
++ /* Maximum number of lines to search back for a "namespace" line. */
++ #define FIND_NAMESPACE_LIM 20
++ 
++ /*
++  * Recognize a "namespace" scope declaration.
++  */
++     static int
++ cin_is_cpp_namespace(s)
++     char_u	*s;
++ {
++     char_u	*p;
++     int		has_name = FALSE;
++ 
++     s = cin_skipcomment(s);
++     if (STRNCMP(s, "namespace", 9) == 0 && (s[9] == NUL || !vim_iswordc(s[9])))
++     {
++ 	p = cin_skipcomment(skipwhite(s + 9));
++ 	while (*p != NUL)
++ 	{
++ 	    if (vim_iswhite(*p))
++ 	    {
++ 		has_name = TRUE; /* found end of a name */
++ 		p = cin_skipcomment(skipwhite(p));
++ 	    }
++ 	    else if (*p == '{')
++ 	    {
++ 		break;
++ 	    }
++ 	    else if (vim_iswordc(*p))
++ 	    {
++ 		if (has_name)
++ 		    return FALSE; /* word character after skipping past name */
++ 		++p;
++ 	    }
++ 	    else
++ 	    {
++ 		return FALSE;
++ 	    }
++ 	}
++ 	return TRUE;
++     }
++     return FALSE;
++ }
++ 
+  /*
+   * Return a pointer to the first non-empty non-comment character after a ':'.
+   * Return NULL if not found.
+***************
+*** 6296,6301 ****
+--- 6341,6351 ----
+       */
+      int ind_keep_case_label = 0;
+  
++     /*
++      * handle C++ namespace
++      */
++     int ind_cpp_namespace = 0;
++ 
+      pos_T	cur_curpos;
+      int		amount;
+      int		scope_amount;
+***************
+*** 6336,6341 ****
+--- 6386,6392 ----
+      int		n;
+      int		iscase;
+      int		lookfor_break;
++     int		lookfor_cpp_namespace = FALSE;
+      int		cont_amount = 0;    /* amount for continuation line */
+      int		original_line_islabel;
+  
+***************
+*** 6409,6414 ****
+--- 6460,6466 ----
+  	    case 'J': ind_js = n; break;
+  	    case 'l': ind_keep_case_label = n; break;
+  	    case '#': ind_hash_comment = n; break;
++ 	    case 'N': ind_cpp_namespace = n; break;
+  	}
+  	if (*options == ',')
+  	    ++options;
+***************
+*** 6976,6986 ****
+--- 7028,7051 ----
+  	    if (start_brace == BRACE_IN_COL0)	    /* '{' is in column 0 */
+  	    {
+  		amount = ind_open_left_imag;
++ 		lookfor_cpp_namespace = TRUE;
++ 	    }
++ 	    else if (start_brace == BRACE_AT_START &&
++ 		    lookfor_cpp_namespace)	  /* '{' is at start */
++ 	    {
++ 
++ 		lookfor_cpp_namespace = TRUE;
+  	    }
+  	    else
+  	    {
+  		if (start_brace == BRACE_AT_END)    /* '{' is at end of line */
++ 		{
+  		    amount += ind_open_imag;
++ 
++ 		    l = skipwhite(ml_get_curline());
++ 		    if (cin_is_cpp_namespace(l))
++ 			amount += ind_cpp_namespace;
++ 		}
+  		else
+  		{
+  		    /* Compensate for adding ind_open_extra later. */
+***************
+*** 7151,7156 ****
+--- 7216,7261 ----
+  			else
+  			    amount += ind_continuation;
+  		    }
++ 		    else if (lookfor_cpp_namespace)
++ 		    {
++ 			if (curwin->w_cursor.lnum == ourscope)
++ 			    continue;
++ 
++ 			if (curwin->w_cursor.lnum == 0
++ 				|| curwin->w_cursor.lnum
++ 					      < ourscope - FIND_NAMESPACE_LIM)
++ 			    break;
++ 
++ 			l = ml_get_curline();
++ 
++ 			/*
++ 			 * If we're in a comment now, skip to the start of the
++ 			 * comment.
++ 			 */
++ 			trypos = find_start_comment(ind_maxcomment);
++ 			if (trypos != NULL)
++ 			{
++ 			    curwin->w_cursor.lnum = trypos->lnum + 1;
++ 			    curwin->w_cursor.col = 0;
++ 			    continue;
++ 			}
++ 
++ 			/*
++ 			 * Skip preprocessor directives and blank lines.
++ 			 */
++ 			if (cin_ispreproc_cont(&l, &curwin->w_cursor.lnum))
++ 			    continue;
++ 
++ 			if (cin_is_cpp_namespace(l))
++ 			{
++ 			    amount += ind_cpp_namespace;
++ 			    break;
++ 			}
++ 
++ 			if (cin_nocode(l))
++ 			    continue;
++ 
++ 		    }
+  		    else if (lookfor != LOOKFOR_TERM
+  					  && lookfor != LOOKFOR_CPP_BASECLASS)
+  		    {
+*** ../mercurial/vim73/src/testdir/test3.in	2011-05-25 13:33:59.000000000 +0200
+--- src/testdir/test3.in	2011-05-25 14:47:31.000000000 +0200
+***************
+*** 799,804 ****
+--- 799,867 ----
+  	df */
+  		hello
+  }
++ 
++ /* valid namespaces with normal indent */
++ namespace
++ {
++ {
++   111111111111;
++ }
++ }
++ namespace /* test */
++ {
++   11111111111111111;
++ }
++ namespace // test
++ {
++   111111111111111111;
++ }
++ namespace
++ {
++   111111111111111111;
++ }
++ namespace test
++ {
++   111111111111111111;
++ }
++ namespace{
++   111111111111111111;
++ }
++ namespace test{
++   111111111111111111;
++ }
++ namespace {
++   111111111111111111;
++ }
++ namespace test {
++   111111111111111111;
++ namespace test2 {
++   22222222222222222;
++ }
++ }
++ 
++ /* invalid namespaces use block indent */
++ namespace test test2 {
++   111111111111111111111;
++ }
++ namespace11111111111 {
++   111111111111;
++ }
++ namespace() {
++   1111111111111;
++ }
++ namespace()
++ {
++   111111111111111111;
++ }
++ namespace test test2
++ {
++   1111111111111111111;
++ }
++ namespace111111111
++ {
++   111111111111111111;
++ }
++ 
+  /* end of AUTO */
+  
+  STARTTEST
+***************
+*** 1428,1433 ****
+--- 1491,1566 ----
+  }
+  
+  STARTTEST
++ :set cino=N-s
++ /namespaces
++ =/^NAMESPACEEND
++ ENDTEST
++ 
++ /* valid namespaces with normal indent */
++ namespace
++ {
++    {
++ 	111111111111;
++ }
++ }
++ namespace /* test */
++ {
++   11111111111111111;
++ }
++ namespace // test
++ {
++   111111111111111111;
++ }
++ namespace
++ {
++   111111111111111111;
++ }
++ namespace test
++ {
++   111111111111111111;
++ }
++ namespace{
++   111111111111111111;
++ }
++ namespace test{
++   111111111111111111;
++ }
++ namespace {
++   111111111111111111;
++ }
++ namespace test {
++   111111111111111111;
++ namespace test2 {
++   22222222222222222;
++ }
++ }
++ 
++ /* invalid namespaces use block indent */
++ namespace test test2 {
++   111111111111111111111;
++ }
++ namespace11111111111 {
++   111111111111;
++ }
++ namespace() {
++   1111111111111;
++ }
++ namespace()
++ {
++   111111111111111111;
++ }
++ namespace test test2
++ {
++   1111111111111111111;
++ }
++ namespace111111111
++ {
++   111111111111111111;
++ }
++ NAMESPACEEND
++ 
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../mercurial/vim73/src/testdir/test3.ok	2011-05-25 13:33:59.000000000 +0200
+--- src/testdir/test3.ok	2011-05-25 14:48:02.000000000 +0200
+***************
+*** 787,792 ****
+--- 787,855 ----
+  	   df */
+  	hello
+  }
++ 
++ /* valid namespaces with normal indent */
++ namespace
++ {
++ 	{
++ 		111111111111;
++ 	}
++ }
++ namespace /* test */
++ {
++ 	11111111111111111;
++ }
++ namespace // test
++ {
++ 	111111111111111111;
++ }
++ namespace
++ {
++ 	111111111111111111;
++ }
++ namespace test
++ {
++ 	111111111111111111;
++ }
++ namespace{
++ 	111111111111111111;
++ }
++ namespace test{
++ 	111111111111111111;
++ }
++ namespace {
++ 	111111111111111111;
++ }
++ namespace test {
++ 	111111111111111111;
++ 	namespace test2 {
++ 		22222222222222222;
++ 	}
++ }
++ 
++ /* invalid namespaces use block indent */
++ namespace test test2 {
++ 	111111111111111111111;
++ }
++ namespace11111111111 {
++ 	111111111111;
++ }
++ namespace() {
++ 	1111111111111;
++ }
++ namespace()
++ {
++ 	111111111111111111;
++ }
++ namespace test test2
++ {
++ 	1111111111111111111;
++ }
++ namespace111111111
++ {
++ 	111111111111111111;
++ }
++ 
+  /* end of AUTO */
+  
+  
+***************
+*** 1273,1275 ****
+--- 1336,1403 ----
+  	baz();
+  }
+  
++ 
++ /* valid namespaces with normal indent */
++ namespace
++ {
++ {
++ 	111111111111;
++ }
++ }
++ namespace /* test */
++ {
++ 11111111111111111;
++ }
++ namespace // test
++ {
++ 111111111111111111;
++ }
++ namespace
++ {
++ 111111111111111111;
++ }
++ namespace test
++ {
++ 111111111111111111;
++ }
++ namespace{
++ 111111111111111111;
++ }
++ namespace test{
++ 111111111111111111;
++ }
++ namespace {
++ 111111111111111111;
++ }
++ namespace test {
++ 111111111111111111;
++ namespace test2 {
++ 22222222222222222;
++ }
++ }
++ 
++ /* invalid namespaces use block indent */
++ namespace test test2 {
++ 	111111111111111111111;
++ }
++ namespace11111111111 {
++ 	111111111111;
++ }
++ namespace() {
++ 	1111111111111;
++ }
++ namespace()
++ {
++ 	111111111111111111;
++ }
++ namespace test test2
++ {
++ 	1111111111111111111;
++ }
++ namespace111111111
++ {
++ 	111111111111111111;
++ }
++ NAMESPACEEND
++ 
++ 
+*** ../vim-7.3.201/src/version.c	2011-05-25 13:33:59.000000000 +0200
+--- src/version.c	2011-05-25 15:14:20.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     202,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+107. When using your phone you forget that you don't have to use your
+     keyboard.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.203 b/source/ap/vim/patches/7.3.203
new file mode 100644
index 00000000..62c29897
--- /dev/null
+++ b/source/ap/vim/patches/7.3.203
@@ -0,0 +1,102 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.203
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.203
+Problem:    MS-Windows: Can't run an external command without a console window.
+Solution:   Support ":!start /b cmd". (Xaizek)
+Files:	    runtime/doc/os_win32.txt, src/os_win32.c
+
+
+*** ../mercurial/vim73/src/os_win32.c	2011-05-05 18:31:54.000000000 +0200
+--- src/os_win32.c	2011-05-25 16:45:31.000000000 +0200
+***************
+*** 3401,3406 ****
+--- 3401,3407 ----
+  	    {
+  		STARTUPINFO		si;
+  		PROCESS_INFORMATION	pi;
++ 		DWORD			flags = CREATE_NEW_CONSOLE;
+  
+  		si.cb = sizeof(si);
+  		si.lpReserved = NULL;
+***************
+*** 3418,3423 ****
+--- 3419,3440 ----
+  		    si.dwFlags = STARTF_USESHOWWINDOW;
+  		    si.wShowWindow = SW_SHOWMINNOACTIVE;
+  		}
++ 		else if ((STRNICMP(cmdbase, "/b", 2) == 0)
++ 			&& vim_iswhite(cmdbase[2]))
++ 		{
++ 		    cmdbase = skipwhite(cmdbase + 2);
++ 		    flags = CREATE_NO_WINDOW;
++ 		    si.dwFlags = STARTF_USESTDHANDLES;
++ 		    si.hStdInput = CreateFile("\\\\.\\NUL",	// File name
++ 			GENERIC_READ,				// Access flags
++ 			0,					// Share flags
++ 			NULL,					// Security att.
++ 			OPEN_EXISTING,				// Open flags
++ 			FILE_ATTRIBUTE_NORMAL,			// File att.
++ 			NULL);					// Temp file
++ 		    si.hStdOutput = si.hStdInput;
++ 		    si.hStdError = si.hStdInput;
++ 		}
+  
+  		/* When the command is in double quotes, but 'shellxquote' is
+  		 * empty, keep the double quotes around the command.
+***************
+*** 3445,3451 ****
+  			NULL,			// Process security attributes
+  			NULL,			// Thread security attributes
+  			FALSE,			// Inherit handles
+! 			CREATE_NEW_CONSOLE,	// Creation flags
+  			NULL,			// Environment
+  			NULL,			// Current directory
+  			&si,			// Startup information
+--- 3462,3468 ----
+  			NULL,			// Process security attributes
+  			NULL,			// Thread security attributes
+  			FALSE,			// Inherit handles
+! 			flags,			// Creation flags
+  			NULL,			// Environment
+  			NULL,			// Current directory
+  			&si,			// Startup information
+***************
+*** 3458,3463 ****
+--- 3475,3485 ----
+  		    EMSG(_("E371: Command not found"));
+  #endif
+  		}
++ 		if (si.hStdInput != NULL)
++ 		{
++ 		    /* Close the handle to \\.\NUL */
++ 		    CloseHandle(si.hStdInput);
++ 		}
+  		/* Close the handles to the subprocess, so that it goes away */
+  		CloseHandle(pi.hThread);
+  		CloseHandle(pi.hProcess);
+*** ../vim-7.3.202/src/version.c	2011-05-25 15:16:06.000000000 +0200
+--- src/version.c	2011-05-25 17:05:59.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     203,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+108. While reading a magazine, you look for the Zoom icon for a better
+     look at a photograph.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.204 b/source/ap/vim/patches/7.3.204
new file mode 100644
index 00000000..b2b63602
--- /dev/null
+++ b/source/ap/vim/patches/7.3.204
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.204
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.204 (after 7.3.201)
+Problem:    Compiler warning.
+Solution:   Add type cast. (Mike Williams)
+Files:	    src/misc1.c
+
+
+*** ../mercurial/vim73/src/misc1.c	2011-05-25 15:16:06.000000000 +0200
+--- src/misc1.c	2011-05-25 17:25:10.000000000 +0200
+***************
+*** 7657,7663 ****
+  			     * not the one from "if () {". */
+  			    if (*l == '}')
+  				curwin->w_cursor.col =
+! 						   (l - ml_get_curline()) + 1;
+  
+  			    if ((trypos = find_start_brace(ind_maxcomment))
+  								       == NULL
+--- 7657,7663 ----
+  			     * not the one from "if () {". */
+  			    if (*l == '}')
+  				curwin->w_cursor.col =
+! 					  (colnr_T)(l - ml_get_curline()) + 1;
+  
+  			    if ((trypos = find_start_brace(ind_maxcomment))
+  								       == NULL
+*** ../vim-7.3.203/src/version.c	2011-05-25 17:06:16.000000000 +0200
+--- src/version.c	2011-05-25 17:29:32.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     204,
+  /**/
+
+-- 
+In a world without walls and borders, who needs windows and gates?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.205 b/source/ap/vim/patches/7.3.205
new file mode 100644
index 00000000..b49a040e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.205
@@ -0,0 +1,93 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.205
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.205
+Problem:    Syntax "extend" doesn't work correctly.
+Solution:   Avoid calling check_state_ends() recursively (Ben Schmidt)
+Files:	    src/syntax.c
+
+
+*** ../mercurial/vim73/src/syntax.c	2011-05-19 12:14:03.000000000 +0200
+--- src/syntax.c	2011-05-25 17:47:46.000000000 +0200
+***************
+*** 990,996 ****
+--- 990,999 ----
+       * previous line and regions that have "keepend".
+       */
+      if (current_state.ga_len > 0)
++     {
+  	syn_update_ends(TRUE);
++ 	check_state_ends();
++     }
+  
+      next_match_idx = -1;
+      ++current_line_id;
+***************
+*** 1064,1070 ****
+  	}
+      }
+      check_keepend();
+-     check_state_ends();
+  }
+  
+  /****************************************
+--- 1067,1072 ----
+***************
+*** 2533,2539 ****
+  check_state_ends()
+  {
+      stateitem_T	*cur_si;
+!     int		had_extend = FALSE;
+  
+      cur_si = &CUR_STATE(current_state.ga_len - 1);
+      for (;;)
+--- 2535,2541 ----
+  check_state_ends()
+  {
+      stateitem_T	*cur_si;
+!     int		had_extend;
+  
+      cur_si = &CUR_STATE(current_state.ga_len - 1);
+      for (;;)
+***************
+*** 2586,2593 ****
+  
+  		/* When the ended item has "extend", another item with
+  		 * "keepend" now needs to check for its end. */
+! 		 if (cur_si->si_flags & HL_EXTEND)
+! 		     had_extend = TRUE;
+  
+  		pop_current_state();
+  
+--- 2588,2594 ----
+  
+  		/* When the ended item has "extend", another item with
+  		 * "keepend" now needs to check for its end. */
+! 		 had_extend = (cur_si->si_flags & HL_EXTEND);
+  
+  		pop_current_state();
+  
+*** ../vim-7.3.204/src/version.c	2011-05-25 17:29:40.000000000 +0200
+--- src/version.c	2011-05-25 17:52:57.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     205,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+110. You actually volunteer to become your employer's webmaster.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.206 b/source/ap/vim/patches/7.3.206
new file mode 100644
index 00000000..8a91f0ae
--- /dev/null
+++ b/source/ap/vim/patches/7.3.206
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.206
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.206
+Problem:    64bit MS-Windows compiler warning.
+Solution:   Use HandleToLong() instead of type cast. (Mike Williams)
+Files:	    src/gui_w32.c
+
+
+*** ../mercurial/vim73/src/gui_w32.c	2011-01-17 20:08:04.000000000 +0100
+--- src/gui_w32.c	2011-05-25 21:14:10.000000000 +0200
+***************
+*** 1575,1581 ****
+  
+  #ifdef FEAT_EVAL
+      /* set the v:windowid variable */
+!     set_vim_var_nr(VV_WINDOWID, (long)s_hwnd);
+  #endif
+  
+  theend:
+--- 1575,1581 ----
+  
+  #ifdef FEAT_EVAL
+      /* set the v:windowid variable */
+!     set_vim_var_nr(VV_WINDOWID, HandleToLong(s_hwnd));
+  #endif
+  
+  theend:
+*** ../vim-7.3.205/src/version.c	2011-05-25 17:56:23.000000000 +0200
+--- src/version.c	2011-05-25 21:16:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     206,
+  /**/
+
+-- 
+FIXME and XXX are two common keywords used to mark broken or incomplete code
+not only since XXX as a sex reference would grab everybody's attention but
+simply due to the fact that Vim would highlight these words.
+					-- Hendrik Scholz
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.207 b/source/ap/vim/patches/7.3.207
new file mode 100644
index 00000000..95b335ec
--- /dev/null
+++ b/source/ap/vim/patches/7.3.207
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.207
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.207
+Problem:    Can't compile with MSVC with pentium4 and 64 bit.
+Solution:   Only use SSE2 for 32 bit. (Mike Williams)
+Files:      src/Make_mvc.mak
+
+
+*** ../mercurial/vim73/src/Make_mvc.mak	2011-02-15 18:06:11.000000000 +0100
+--- src/Make_mvc.mak	2011-06-04 11:59:38.000000000 +0200
+***************
+*** 409,416 ****
+  CPUARG =
+  !endif
+  !else
+! # VC8/9 only allows specifying SSE architecture
+! !if "$(CPUNR)" == "pentium4"
+  CPUARG = /arch:SSE2
+  !endif
+  !endif
+--- 409,416 ----
+  CPUARG =
+  !endif
+  !else
+! # VC8/9/10 only allows specifying SSE architecture but only for 32bit
+! !if "$(ASSEMBLY_ARCHITECTURE)" == "x86" && "$(CPUNR)" == "pentium4"
+  CPUARG = /arch:SSE2
+  !endif
+  !endif
+*** ../vim-7.3.206/src/version.c	2011-05-25 21:18:02.000000000 +0200
+--- src/version.c	2011-06-12 20:30:30.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     207,
+  /**/
+
+-- 
+"The question of whether computers can think is just like the question
+of whether submarines can swim."      -- Edsger W. Dijkstra
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.208 b/source/ap/vim/patches/7.3.208
new file mode 100644
index 00000000..c5a79295
--- /dev/null
+++ b/source/ap/vim/patches/7.3.208
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.208
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.208
+Problem:    Early terminated if statement.
+Solution:   Remove the semicolon. (Lech Lorens)
+Files:      src/gui_mac.c
+
+
+*** ../mercurial/vim73/src/gui_mac.c	2011-01-17 20:08:04.000000000 +0100
+--- src/gui_mac.c	2011-06-06 05:35:46.000000000 +0200
+***************
+*** 1840,1846 ****
+  	p.v -= gui.scrollbar_height;
+      p.v -= p.v % gui.char_height;
+      p.v += 2 * gui.border_width;
+!     if (gui.which_scrollbars[SBAR_BOTTOM]);
+  	p.v += gui.scrollbar_height;
+  
+      ZoomWindowIdeal(whichWindow, thePart, &p);
+--- 1840,1846 ----
+  	p.v -= gui.scrollbar_height;
+      p.v -= p.v % gui.char_height;
+      p.v += 2 * gui.border_width;
+!     if (gui.which_scrollbars[SBAR_BOTTOM])
+  	p.v += gui.scrollbar_height;
+  
+      ZoomWindowIdeal(whichWindow, thePart, &p);
+*** ../vim-7.3.207/src/version.c	2011-06-12 20:31:25.000000000 +0200
+--- src/version.c	2011-06-12 20:33:00.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     208,
+  /**/
+
+-- 
+Keep America beautiful.  Swallow your beer cans.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.209 b/source/ap/vim/patches/7.3.209
new file mode 100644
index 00000000..afd4ab82
--- /dev/null
+++ b/source/ap/vim/patches/7.3.209
@@ -0,0 +1,95 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.209
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.209
+Problem:    MSVC Install instructions point to wrong batch file.
+Solution:   Add a batch file for use with MSVC 10.
+Files:      src/msvc2010.bat, src/INSTALLpc.txt, Filelist
+
+
+*** ../mercurial/vim73/src/msvc2010.bat	2011-06-12 20:35:31.000000000 +0200
+--- src/msvc2010.bat	2011-06-09 05:08:35.000000000 +0200
+***************
+*** 0 ****
+--- 1,7 ----
++ @echo off
++ rem To be used on MS-Windows for Visual C++ 2010 Express Edition
++ rem   aka Microsoft Visual Studio 10.0.
++ rem See INSTALLpc.txt for information.
++ @echo on
++ 
++ call "%VS100COMNTOOLS%%vsvars32.bat"
+*** ../mercurial/vim73/src/INSTALLpc.txt	2010-08-16 21:23:30.000000000 +0200
+--- src/INSTALLpc.txt	2011-06-08 06:47:46.000000000 +0200
+***************
+*** 28,35 ****
+  9. MS-DOS
+  
+  The currently preferred method is using the free Visual C++ Toolkit 2008
+! |msvc-2008-express|.  If you need the executable to run on Windows 98 or ME,
+! use the 2003 one |msvc-2003-toolkit|.
+  
+  
+  1. Microsoft Visual C++
+--- 28,36 ----
+  9. MS-DOS
+  
+  The currently preferred method is using the free Visual C++ Toolkit 2008
+! |msvc-2008-express|, the produced binary runs on most MS-Windows systems.  If
+! you need the executable to run on Windows 98 or ME, use the 2003 one
+! |msvc-2003-toolkit|.
+  
+  
+  1. Microsoft Visual C++
+***************
+*** 176,182 ****
+      http://www.microsoft.com/express/vc/Default.aspx
+  This includes the IDE and the debugger.
+  
+! To set the environment execute the msvc2008.bat script.  You can then build
+  Vim with Make_mvc.mak.
+  
+  
+--- 177,183 ----
+      http://www.microsoft.com/express/vc/Default.aspx
+  This includes the IDE and the debugger.
+  
+! To set the environment execute the msvc2010.bat script.  You can then build
+  Vim with Make_mvc.mak.
+  
+  
+*** ../mercurial/vim73/Filelist	2011-05-19 13:40:47.000000000 +0200
+--- Filelist	2011-06-09 05:17:25.000000000 +0200
+***************
+*** 262,267 ****
+--- 262,268 ----
+  		src/bigvim.bat \
+  		src/msvcsetup.bat \
+  		src/msvc2008.bat \
++ 		src/msvc2010.bat \
+  		src/dimm.idl \
+  		src/dlldata.c \
+  		src/dosinst.c \
+*** ../vim-7.3.208/src/version.c	2011-06-12 20:33:30.000000000 +0200
+--- src/version.c	2011-06-12 20:34:44.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     209,
+  /**/
+
+-- 
+"Hit any key to continue" is a lie.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.210 b/source/ap/vim/patches/7.3.210
new file mode 100644
index 00000000..f02fe6fe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.210
@@ -0,0 +1,182 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.210
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.210
+Problem:    Can't always find the file when using cscope.
+Solution:   Add the 'cscoperelative' option. (Raghavendra D Prabhu)
+Files:      runtime/doc/if_cscop.txt, runtime/doc/options.txt,
+            src/if_cscope.c, src/options.c, src/options.h
+
+
+*** ../mercurial/vim73/runtime/doc/if_cscop.txt	2010-09-30 21:38:08.000000000 +0200
+--- runtime/doc/if_cscop.txt	2011-06-12 19:54:26.000000000 +0200
+***************
+*** 271,276 ****
+--- 271,285 ----
+  	:set cst
+  	:set nocst
+  <
++ 							*cscoperelative* *csre*
++ If 'cscoperelative' set, then in absence of a prefix given to cscope (prefx
++ is the argument to -P option of cscope), basename of cscope.out location
++ (usually the project root directory) will be used as the prefix to construt
++ absolute path.The default is off. Note: This option is only effective when
++ cscope (cscopeprg) is initialized without a prefix path (-P). Examples: >
++ 	:set csre
++ 	:set nocsre
++ <
+  							*cscopetagorder* *csto*
+  The value of 'csto' determines the order in which |:cstag| performs a search.
+  If 'csto' is set to zero, cscope database(s) are searched first, followed
+*** ../mercurial/vim73/runtime/doc/options.txt	2011-05-19 12:22:41.000000000 +0200
+--- runtime/doc/options.txt	2011-06-12 20:00:10.000000000 +0200
+***************
+*** 2209,2214 ****
+--- 2209,2224 ----
+  	Specifies whether to use quickfix window to show cscope results.
+  	See |cscopequickfix|.
+  
++ 						*'cscoperelative'* *'csre'*
++ 'cscoperelative' 'csre' boolean (default off)
++ 			global
++ 			{not available when compiled without the |+cscope|
++ 			feature}
++ 			{not in Vi}
++ 	In the absence of a prefix (-P) for cscope. setting this option enables
++ 	to use the basename of cscope.out path as the prefix.
++ 	See |cscoperelative|.
++ 
+  				*'cscopetag'* *'cst'* *'nocscopetag'* *'nocst'*
+  'cscopetag' 'cst'	boolean (default off)
+  			global
+*** ../mercurial/vim73/src/if_cscope.c	2011-05-05 16:41:19.000000000 +0200
+--- src/if_cscope.c	2011-06-12 20:25:17.000000000 +0200
+***************
+*** 2471,2512 ****
+   */
+      static char *
+  cs_resolve_file(i, name)
+!     int i;
+      char *name;
+  {
+!     char *fullname;
+!     int len;
+  
+      /*
+!      * ppath is freed when we destroy the cscope connection.
+!      * fullname is freed after cs_make_vim_style_matches, after it's been
+!      * copied into the tag buffer used by vim
+       */
+      len = (int)(strlen(name) + 2);
+      if (csinfo[i].ppath != NULL)
+  	len += (int)strlen(csinfo[i].ppath);
+  
+      if ((fullname = (char *)alloc(len)) == NULL)
+  	return NULL;
+  
+!     /*
+!      * note/example: this won't work if the cscope output already starts
+       * "../.." and the prefix path is also "../..".  if something like this
+!      * happens, you are screwed up and need to fix how you're using cscope.
+!      */
+!     if (csinfo[i].ppath != NULL &&
+! 	(strncmp(name, csinfo[i].ppath, strlen(csinfo[i].ppath)) != 0) &&
+! 	(name[0] != '/')
+  #ifdef WIN32
+! 	&& name[0] != '\\' && name[1] != ':'
+  #endif
+! 	)
+  	(void)sprintf(fullname, "%s/%s", csinfo[i].ppath, name);
+      else
+  	(void)sprintf(fullname, "%s", name);
+  
+      return fullname;
+! } /* cs_resolve_file */
+  
+  
+  /*
+--- 2471,2531 ----
+   */
+      static char *
+  cs_resolve_file(i, name)
+!     int  i;
+      char *name;
+  {
+!     char	*fullname;
+!     int		len;
+!     char_u	*csdir = NULL;
+  
+      /*
+!      * Ppath is freed when we destroy the cscope connection.
+!      * Fullname is freed after cs_make_vim_style_matches, after it's been
+!      * copied into the tag buffer used by Vim.
+       */
+      len = (int)(strlen(name) + 2);
+      if (csinfo[i].ppath != NULL)
+  	len += (int)strlen(csinfo[i].ppath);
++     else if (p_csre && csinfo[i].fname != NULL)
++     {
++ 	/* If 'cscoperelative' is set and ppath is not set, use cscope.out
++ 	 * path in path resolution. */
++ 	csdir = alloc(MAXPATHL);
++ 	if (csdir != NULL)
++ 	{
++ 	    vim_strncpy(csdir, (char_u *)csinfo[i].fname,
++ 		    gettail((char_u *)csinfo[i].fname) - 1 - (char_u *)csinfo[i].fname);
++ 	    len += (int)STRLEN(csdir);
++ 	}
++     }
+  
+      if ((fullname = (char *)alloc(len)) == NULL)
+  	return NULL;
+  
+!     /* Note/example: this won't work if the cscope output already starts
+       * "../.." and the prefix path is also "../..".  if something like this
+!      * happens, you are screwed up and need to fix how you're using cscope. */
+!     if (csinfo[i].ppath != NULL
+! 	    && (strncmp(name, csinfo[i].ppath, strlen(csinfo[i].ppath)) != 0)
+! 	    && (name[0] != '/')
+  #ifdef WIN32
+! 	    && name[0] != '\\' && name[1] != ':'
+  #endif
+!        )
+  	(void)sprintf(fullname, "%s/%s", csinfo[i].ppath, name);
++     else if (csdir != NULL && csinfo[i].fname != NULL && STRLEN(csdir) > 0)
++     {
++ 	/* Check for csdir to be non empty to avoid empty path concatenated to
++ 	 * cscope output. TODO: avoid the unnecessary alloc/free of fullname. */
++ 	vim_free(fullname);
++ 	fullname = concat_fnames(csdir, (char_u *)name, TRUE);
++     }
+      else
+  	(void)sprintf(fullname, "%s", name);
+  
++     vim_free(csdir);
+      return fullname;
+! }
+  
+  
+  /*
+*** ../vim-7.3.209/src/version.c	2011-06-12 20:36:00.000000000 +0200
+--- src/version.c	2011-06-12 20:37:48.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     210,
+  /**/
+
+-- 
+Apathy Error: Don't bother striking any key.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.211 b/source/ap/vim/patches/7.3.211
new file mode 100644
index 00000000..4760c106
--- /dev/null
+++ b/source/ap/vim/patches/7.3.211
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.211
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.211 (after 7.3.210)
+Problem:    Compiler warning.
+Solution:   Add type cast.
+Files:      src/if_cscope.c
+
+
+*** ../mercurial/vim73/src/if_cscope.c	2011-06-12 20:42:17.000000000 +0200
+--- src/if_cscope.c	2011-06-12 21:22:53.000000000 +0200
+***************
+*** 2518,2524 ****
+  	/* Check for csdir to be non empty to avoid empty path concatenated to
+  	 * cscope output. TODO: avoid the unnecessary alloc/free of fullname. */
+  	vim_free(fullname);
+! 	fullname = concat_fnames(csdir, (char_u *)name, TRUE);
+      }
+      else
+  	(void)sprintf(fullname, "%s", name);
+--- 2518,2524 ----
+  	/* Check for csdir to be non empty to avoid empty path concatenated to
+  	 * cscope output. TODO: avoid the unnecessary alloc/free of fullname. */
+  	vim_free(fullname);
+! 	fullname = (char *)concat_fnames(csdir, (char_u *)name, TRUE);
+      }
+      else
+  	(void)sprintf(fullname, "%s", name);
+*** ../vim-7.3.210/src/version.c	2011-06-12 20:42:17.000000000 +0200
+--- src/version.c	2011-06-12 21:24:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     211,
+  /**/
+
+-- 
+Did you ever see a "Hit any key to continue" message in a music piece?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.212 b/source/ap/vim/patches/7.3.212
new file mode 100644
index 00000000..d5086db0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.212
@@ -0,0 +1,243 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.212
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.212
+Problem:    With Python 3.2 ":py3" fails.
+Solution:   Move PyEval_InitThreads() to after Py_Initialize(). (Roland
+            Puntaier)  Check abiflags in configure. (Andreas Behr)
+Files:      src/if_python3.c, src/auto/configure, src/configure.in
+
+
+*** ../mercurial/vim73/src/if_python3.c	2011-02-25 15:18:46.000000000 +0100
+--- src/if_python3.c	2011-06-11 04:24:49.000000000 +0200
+***************
+*** 547,560 ****
+  	Py_SetPythonHome(PYTHON3_HOME);
+  #endif
+  
+- 	/* initialise threads */
+- 	PyEval_InitThreads();
+- 
+  #if !defined(MACOS) || defined(MACOS_X_UNIX)
+  	Py_Initialize();
+  #else
+  	PyMac_Initialize();
+  #endif
+  
+  #ifdef DYNAMIC_PYTHON3
+  	get_py3_exceptions();
+--- 547,559 ----
+  	Py_SetPythonHome(PYTHON3_HOME);
+  #endif
+  
+  #if !defined(MACOS) || defined(MACOS_X_UNIX)
+  	Py_Initialize();
+  #else
+  	PyMac_Initialize();
+  #endif
++ 	/* initialise threads, must be after Py_Initialize() */
++ 	PyEval_InitThreads();
+  
+  #ifdef DYNAMIC_PYTHON3
+  	get_py3_exceptions();
+*** ../mercurial/vim73/src/auto/configure	2011-05-10 15:41:59.000000000 +0200
+--- src/auto/configure	2011-06-12 21:33:16.000000000 +0200
+***************
+*** 5505,5510 ****
+--- 5505,5527 ----
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $vi_cv_var_python3_version" >&5
+  $as_echo "$vi_cv_var_python3_version" >&6; }
+  
++         { $as_echo "$as_me:${as_lineno-$LINENO}: checking Python's abiflags" >&5
++ $as_echo_n "checking Python's abiflags... " >&6; }
++ if test "${vi_cv_var_python3_abiflags+set}" = set; then :
++   $as_echo_n "(cached) " >&6
++ else
++ 
++      vi_cv_var_python3_abiflags=
++      if ${vi_cv_path_python3} -c \
++          "import sys; sys.exit(${vi_cv_var_python3_version} < 3.2)"
++      then
++        vi_cv_var_python3_abiflags=`${vi_cv_path_python3} -c \
++          "import sys; print(sys.abiflags)"`
++      fi
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $vi_cv_var_python3_abiflags" >&5
++ $as_echo "$vi_cv_var_python3_abiflags" >&6; }
++ 
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking Python's install prefix" >&5
+  $as_echo_n "checking Python's install prefix... " >&6; }
+  if test "${vi_cv_path_python3_pfx+set}" = set; then :
+***************
+*** 5555,5563 ****
+  else
+  
+       vi_cv_path_python3_conf=
+       for path in "${vi_cv_path_python3_pfx}" "${vi_cv_path_python3_epfx}"; do
+         for subdir in lib64 lib share; do
+!          d="${path}/${subdir}/python${vi_cv_var_python3_version}/config"
+           if test -d "$d" && test -f "$d/config.c"; then
+             vi_cv_path_python3_conf="$d"
+           fi
+--- 5572,5584 ----
+  else
+  
+       vi_cv_path_python3_conf=
++      config_dir="config"
++      if test "${vi_cv_var_python3_abiflags}" != ""; then
++        config_dir="${config_dir}-${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags}"
++      fi
+       for path in "${vi_cv_path_python3_pfx}" "${vi_cv_path_python3_epfx}"; do
+         for subdir in lib64 lib share; do
+!          d="${path}/${subdir}/python${vi_cv_var_python3_version}/${config_dir}"
+           if test -d "$d" && test -f "$d/config.c"; then
+             vi_cv_path_python3_conf="$d"
+           fi
+***************
+*** 5592,5598 ****
+                      eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+            vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+!           vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS} ${python3_LINKFORSHARED}"
+                      vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+  
+--- 5613,5619 ----
+                      eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+            vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+!           vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+                      vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+  
+***************
+*** 5601,5609 ****
+  
+        PYTHON3_LIBS="${vi_cv_path_python3_plibs}"
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+              if test "x$MACOSX" = "xyes"; then
+--- 5622,5630 ----
+  
+        PYTHON3_LIBS="${vi_cv_path_python3_plibs}"
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+              if test "x$MACOSX" = "xyes"; then
+*** ../mercurial/vim73/src/configure.in	2011-05-10 15:41:59.000000000 +0200
+--- src/configure.in	2011-06-12 21:31:18.000000000 +0200
+***************
+*** 992,997 ****
+--- 992,1008 ----
+            ${vi_cv_path_python3} -c 'import sys; print(sys.version[:3])'`
+      ]])
+  
++     dnl -- get abiflags for python 3.2 or higher (PEP 3149)
++     AC_CACHE_CHECK(Python's abiflags,vi_cv_var_python3_abiflags,
++     [
++      vi_cv_var_python3_abiflags=
++      if ${vi_cv_path_python3} -c \
++          "import sys; sys.exit(${vi_cv_var_python3_version} < 3.2)"
++      then
++        vi_cv_var_python3_abiflags=`${vi_cv_path_python3} -c \    
++          "import sys; print(sys.abiflags)"`
++      fi ])
++ 
+      dnl -- find where python3 thinks it was installed
+      AC_CACHE_CHECK(Python's install prefix,vi_cv_path_python3_pfx,
+      [ vi_cv_path_python3_pfx=`
+***************
+*** 1021,1029 ****
+      AC_CACHE_CHECK(Python's configuration directory,vi_cv_path_python3_conf,
+      [
+       vi_cv_path_python3_conf=
+       for path in "${vi_cv_path_python3_pfx}" "${vi_cv_path_python3_epfx}"; do
+         for subdir in lib64 lib share; do
+!          d="${path}/${subdir}/python${vi_cv_var_python3_version}/config"
+           if test -d "$d" && test -f "$d/config.c"; then
+             vi_cv_path_python3_conf="$d"
+           fi
+--- 1032,1044 ----
+      AC_CACHE_CHECK(Python's configuration directory,vi_cv_path_python3_conf,
+      [
+       vi_cv_path_python3_conf=
++      config_dir="config"
++      if test "${vi_cv_var_python3_abiflags}" != ""; then
++        config_dir="${config_dir}-${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags}"
++      fi
+       for path in "${vi_cv_path_python3_pfx}" "${vi_cv_path_python3_epfx}"; do
+         for subdir in lib64 lib share; do
+!          d="${path}/${subdir}/python${vi_cv_var_python3_version}/${config_dir}"
+           if test -d "$d" && test -f "$d/config.c"; then
+             vi_cv_path_python3_conf="$d"
+           fi
+***************
+*** 1055,1061 ****
+            eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+            vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+!           vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS} ${python3_LINKFORSHARED}"
+            dnl remove -ltermcap, it can conflict with an earlier -lncurses
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+--- 1070,1076 ----
+            eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+            vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+!           vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+            dnl remove -ltermcap, it can conflict with an earlier -lncurses
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+***************
+*** 1063,1071 ****
+  
+        PYTHON3_LIBS="${vi_cv_path_python3_plibs}"
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+        dnl For Mac OSX 10.2 config.o is included in the Python library.
+--- 1078,1086 ----
+  
+        PYTHON3_LIBS="${vi_cv_path_python3_plibs}"
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+        dnl For Mac OSX 10.2 config.o is included in the Python library.
+*** ../vim-7.3.211/src/version.c	2011-06-12 21:24:56.000000000 +0200
+--- src/version.c	2011-06-12 21:35:31.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     212,
+  /**/
+
+-- 
+In Joseph Heller's novel "Catch-22", the main character tries to get out of a
+war by proving he is crazy.  But the mere fact he wants to get out of the war
+only shows he isn't crazy -- creating the original "Catch-22".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.213 b/source/ap/vim/patches/7.3.213
new file mode 100644
index 00000000..d3ef325e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.213
@@ -0,0 +1,142 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.213
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.213
+Problem:    Javascript object literal is not indented correctly.
+Solution:   Make a special case for when "J1" is in 'cino'. (Luc Deschenaux)
+Files:      src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../mercurial/vim73/src/misc1.c	2011-05-25 17:29:40.000000000 +0200
+--- src/misc1.c	2011-06-10 04:58:10.000000000 +0200
+***************
+*** 6965,6971 ****
+  	     *			ldfd) {
+  	     *		    }
+  	     */
+! 	    if ((ind_keep_case_label
+  			   && cin_iscase(skipwhite(ml_get_curline()), FALSE)))
+  		amount = get_indent();
+  	    else
+--- 6965,6971 ----
+  	     *			ldfd) {
+  	     *		    }
+  	     */
+! 	    if (ind_js || (ind_keep_case_label
+  			   && cin_iscase(skipwhite(ml_get_curline()), FALSE)))
+  		amount = get_indent();
+  	    else
+*** ../mercurial/vim73/src/testdir/test3.in	2011-05-25 15:16:06.000000000 +0200
+--- src/testdir/test3.in	2011-06-12 21:44:12.000000000 +0200
+***************
+*** 1492,1501 ****
+  
+  STARTTEST
+  :set cino=N-s
+! /namespaces
+  =/^NAMESPACEEND
+  ENDTEST
+  
+  /* valid namespaces with normal indent */
+  namespace
+  {
+--- 1492,1502 ----
+  
+  STARTTEST
+  :set cino=N-s
+! /^NAMESPACESTART
+  =/^NAMESPACEEND
+  ENDTEST
+  
++ NAMESPACESTART
+  /* valid namespaces with normal indent */
+  namespace
+  {
+***************
+*** 1561,1566 ****
+--- 1562,1588 ----
+  
+  
+  STARTTEST
++ :set cino=J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ var bar = {
++ foo: {
++ that: this,
++ some: ok,
++ },
++ "bar":{
++ a : 2,
++ b: "123abc",
++ x: 4,
++ "y": 5
++ }
++ }
++ JSEND
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../mercurial/vim73/src/testdir/test3.ok	2011-05-25 15:16:06.000000000 +0200
+--- src/testdir/test3.ok	2011-06-12 21:44:26.000000000 +0200
+***************
+*** 1337,1342 ****
+--- 1337,1343 ----
+  }
+  
+  
++ NAMESPACESTART
+  /* valid namespaces with normal indent */
+  namespace
+  {
+***************
+*** 1401,1403 ****
+--- 1402,1420 ----
+  NAMESPACEEND
+  
+  
++ 
++ JSSTART
++ var bar = {
++ 	foo: {
++ 		that: this,
++ 		some: ok,
++ 	},
++ 	"bar":{
++ 		a : 2,
++ 		b: "123abc",
++ 		x: 4,
++ 		"y": 5
++ 	}
++ }
++ JSEND
++ 
+*** ../vim-7.3.212/src/version.c	2011-06-12 21:37:06.000000000 +0200
+--- src/version.c	2011-06-12 21:48:34.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     213,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+169. You hire a housekeeper for your home page.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.214 b/source/ap/vim/patches/7.3.214
new file mode 100644
index 00000000..a095bbc4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.214
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.214
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.214
+Problem:    The text displayed by ":z-" isn't exactly like old Vi.
+Solution:   Add one to the start line number. (ChangZhuo Chen)
+Files:      src/ex_cmds.c
+
+
+*** ../mercurial/vim73/src/ex_cmds.c	2011-05-19 14:30:07.000000000 +0200
+--- src/ex_cmds.c	2011-05-19 14:23:33.000000000 +0200
+***************
+*** 4097,4104 ****
+      switch (*kind)
+      {
+  	case '-':
+! 	    start = lnum - bigness * (linenr_T)(x - kind);
+! 	    end = start + bigness;
+  	    curs = end;
+  	    break;
+  
+--- 4097,4104 ----
+      switch (*kind)
+      {
+  	case '-':
+! 	    start = lnum - bigness * (linenr_T)(x - kind) + 1;
+! 	    end = start + bigness - 1;
+  	    curs = end;
+  	    break;
+  
+*** ../vim-7.3.213/src/version.c	2011-06-12 21:51:01.000000000 +0200
+--- src/version.c	2011-06-12 22:02:20.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     214,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+170. You introduce your wife as "my_lady@home.wife" and refer to your
+     children as "forked processes."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.215 b/source/ap/vim/patches/7.3.215
new file mode 100644
index 00000000..24d37fbf
--- /dev/null
+++ b/source/ap/vim/patches/7.3.215
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.215
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.215 (after 7.3.210)
+Problem:    Wrong file names in previous patch. (Toothpik)
+Solution:   Include the option changes.
+Files:      src/option.c, src/option.h
+
+
+*** ../mercurial/vim73/src/option.c	2011-05-19 13:40:47.000000000 +0200
+--- src/option.c	2011-06-12 19:58:17.000000000 +0200
+***************
+*** 901,906 ****
+--- 901,913 ----
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
++     {"cscoperelative", "csre", P_BOOL|P_VI_DEF|P_VIM,
++ #ifdef FEAT_CSCOPE
++ 			    (char_u *)&p_csre, PV_NONE,
++ #else
++ 			    (char_u *)NULL, PV_NONE,
++ #endif
++ 			    {(char_u *)0L, (char_u *)0L} SCRIPTID_INIT},
+      {"cscopetag",   "cst",  P_BOOL|P_VI_DEF|P_VIM,
+  #ifdef FEAT_CSCOPE
+  			    (char_u *)&p_cst, PV_NONE,
+*** ../mercurial/vim73/src/option.h	2011-05-19 13:40:47.000000000 +0200
+--- src/option.h	2011-06-12 19:58:49.000000000 +0200
+***************
+*** 391,396 ****
+--- 391,397 ----
+  EXTERN char_u	*p_cpo;		/* 'cpoptions' */
+  #ifdef FEAT_CSCOPE
+  EXTERN char_u	*p_csprg;	/* 'cscopeprg' */
++ EXTERN int	p_csre;		/* 'cscoperelative' */
+  # ifdef FEAT_QUICKFIX
+  EXTERN char_u	*p_csqf;	/* 'cscopequickfix' */
+  #  define	CSQF_CMDS   "sgdctefi"
+*** ../vim-7.3.214/src/version.c	2011-06-12 22:03:15.000000000 +0200
+--- src/version.c	2011-06-12 22:12:34.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     215,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+171. You invent another person and chat with yourself in empty chat rooms.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.216 b/source/ap/vim/patches/7.3.216
new file mode 100644
index 00000000..a52bc936
--- /dev/null
+++ b/source/ap/vim/patches/7.3.216
@@ -0,0 +1,263 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.216
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.216
+Problem:    When recovering a file a range of lines is missing. (Charles Jie)
+Solution:   Reset the index when advancing to the next pointer block.  Add a
+            test to verify recovery works.
+Files:      src/memline.c, src/testdir/test78.in, src/testdir/test78.ok,
+            src/testdir/Makefile, src/testdir/Make_amiga.mak,
+            src/testdir/Make_dos.mak, src/testdir/Make_ming.mak,
+            src/testdir/Make_os2.mak, src/testdir/Make_vms.mms
+
+
+*** ../mercurial/vim73/src/memline.c	2011-05-10 16:41:13.000000000 +0200
+--- src/memline.c	2011-06-13 00:56:09.000000000 +0200
+***************
+*** 1507,1512 ****
+--- 1507,1513 ----
+  		    bnum = pp->pb_pointer[idx].pe_bnum;
+  		    line_count = pp->pb_pointer[idx].pe_line_count;
+  		    page_count = pp->pb_pointer[idx].pe_page_count;
++ 		    idx = 0;
+  		    continue;
+  		}
+  	    }
+*** ../mercurial/vim73/src/testdir/test78.in	2011-06-13 01:05:54.000000000 +0200
+--- src/testdir/test78.in	2011-06-13 00:54:48.000000000 +0200
+***************
+*** 0 ****
+--- 1,46 ----
++ Inserts 10000 lines with text to fill the swap file with two levels of pointer
++ blocks.  Then recovers from the swap file and checks all text is restored.
++ 
++ We need about 10000 lines of 100 characters to get two levels of pointer
++ blocks.
++ 
++ STARTTEST
++ :so small.vim
++ :set nocp fileformat=unix undolevels=-1
++ :e! Xtest
++ ggdG
++ :let text = "\tabcdefghijklmnoparstuvwxyz0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnoparstuvwxyz0123456789"
++ :let i = 1
++ :let linecount = 10000
++ :while i <= linecount | call append(i - 1, i . text) | let i += 1 | endwhile
++ :preserve
++ :" get the name of the swap file
++ :redir => swapname
++ :swapname
++ :redir END
++ :let swapname = substitute(swapname, '[[:blank:][:cntrl:]]*\(.\{-}\)[[:blank:][:cntrl:]]*$', '\1', '')
++ :" make a copy of the swap file in Xswap
++ :set bin
++ :exe 'sp ' . swapname
++ :w! Xswap
++ :echo swapname
++ :set nobin
++ :new
++ :only!
++ :bwipe! Xtest
++ :call rename('Xswap', swapname)
++ :recover Xtest
++ :call delete(swapname)
++ :new
++ :call append(0, 'recovery start')
++ :wincmd w
++ :let linedollar = line('$')
++ :if linedollar < linecount | exe 'wincmd w' | call append(line('$'), "expected " . linecount . " lines but found only " . linedollar) | exe 'wincmd w' | let linecount = linedollar | endif
++ :let i = 1
++ :while i <= linecount | if getline(i) != i . text | exe 'wincmd w' | call append(line('$'), i . ' differs') | exe 'wincmd w' | endif | let i += 1 | endwhile
++ :q!
++ :call append(line('$'), 'recovery end')
++ :w! test.out
++ :qa!
++ ENDTEST
++ 
+*** ../mercurial/vim73/src/testdir/test78.ok	2011-06-13 01:05:54.000000000 +0200
+--- src/testdir/test78.ok	2011-06-13 00:25:05.000000000 +0200
+***************
+*** 0 ****
+--- 1,3 ----
++ recovery start
++ 
++ recovery end
+*** ../mercurial/vim73/src/testdir/Makefile	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/Makefile	2011-06-13 00:35:46.000000000 +0200
+***************
+*** 25,31 ****
+  		test59.out test60.out test61.out test62.out test63.out \
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 25,31 ----
+  		test59.out test60.out test61.out test62.out test63.out \
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out test78.out
+  
+  SCRIPTS_GUI = test16.out
+  
+***************
+*** 71,77 ****
+  		  fi \
+  		else echo $* NO OUTPUT >>test.log; \
+  		fi"
+! #	-rm -rf X* test.ok viminfo
+  
+  test49.out: test49.vim
+  
+--- 71,77 ----
+  		  fi \
+  		else echo $* NO OUTPUT >>test.log; \
+  		fi"
+! 	-rm -rf X* test.ok viminfo
+  
+  test49.out: test49.vim
+  
+*** ../mercurial/vim73/src/testdir/Make_amiga.mak	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/Make_amiga.mak	2011-06-13 01:00:42.000000000 +0200
+***************
+*** 28,34 ****
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out
+  
+  .SUFFIXES: .in .out
+  
+--- 28,34 ----
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out
+  
+  .SUFFIXES: .in .out
+  
+***************
+*** 125,127 ****
+--- 125,128 ----
+  test75.out: test75.in
+  test76.out: test76.in
+  test77.out: test77.in
++ test78.out: test78.in
+*** ../mercurial/vim73/src/testdir/Make_dos.mak	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/Make_dos.mak	2011-06-13 01:00:55.000000000 +0200
+***************
+*** 28,34 ****
+  		test37.out test38.out test39.out test40.out test41.out \
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 28,34 ----
+  		test37.out test38.out test39.out test40.out test41.out \
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out test78.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../mercurial/vim73/src/testdir/Make_ming.mak	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/Make_ming.mak	2011-06-13 01:01:02.000000000 +0200
+***************
+*** 48,54 ****
+  		test37.out test38.out test39.out test40.out test41.out \
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 48,54 ----
+  		test37.out test38.out test39.out test40.out test41.out \
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+! 		test74.out test75.out test76.out test77.out test78.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../mercurial/vim73/src/testdir/Make_os2.mak	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/Make_os2.mak	2011-06-13 01:01:08.000000000 +0200
+***************
+*** 28,34 ****
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out
+  
+  .SUFFIXES: .in .out
+  
+--- 28,34 ----
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out
+  
+  .SUFFIXES: .in .out
+  
+*** ../mercurial/vim73/src/testdir/Make_vms.mms	2011-04-28 19:05:01.000000000 +0200
+--- src/testdir/Make_vms.mms	2011-06-13 01:01:29.000000000 +0200
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Mar 03
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jun 13
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 75,81 ****
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 75,81 ----
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out test78.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.215/src/version.c	2011-06-12 22:13:37.000000000 +0200
+--- src/version.c	2011-06-13 00:59:02.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     216,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+172. You join listservers just for the extra e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.217 b/source/ap/vim/patches/7.3.217
new file mode 100644
index 00000000..be04b863
--- /dev/null
+++ b/source/ap/vim/patches/7.3.217
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.217
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.217
+Problem:    Inside an "if" a ":wincmd" causes problems.
+Solution:   When skipping commands let ":wincmd" skip over its argument.
+Files:      src/ex_docmd.c
+
+
+*** ../mercurial/vim73/src/ex_docmd.c	2011-05-25 12:51:17.000000000 +0200
+--- src/ex_docmd.c	2011-06-13 01:15:17.000000000 +0200
+***************
+*** 2595,2600 ****
+--- 2595,2601 ----
+  	    case CMD_unlet:
+  	    case CMD_verbose:
+  	    case CMD_vertical:
++ 	    case CMD_wincmd:
+  				break;
+  
+  	    default:		goto doend;
+***************
+*** 8237,8243 ****
+      p = skipwhite(p);
+      if (*p != NUL && *p != '"' && eap->nextcmd == NULL)
+  	EMSG(_(e_invarg));
+!     else
+      {
+  	/* Pass flags on for ":vertical wincmd ]". */
+  	postponed_split_flags = cmdmod.split;
+--- 8238,8244 ----
+      p = skipwhite(p);
+      if (*p != NUL && *p != '"' && eap->nextcmd == NULL)
+  	EMSG(_(e_invarg));
+!     else if (!eap->skip)
+      {
+  	/* Pass flags on for ":vertical wincmd ]". */
+  	postponed_split_flags = cmdmod.split;
+*** ../vim-7.3.216/src/version.c	2011-06-13 01:07:22.000000000 +0200
+--- src/version.c	2011-06-13 01:18:48.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     217,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+173. You keep tracking down the email addresses of all your friends
+     (even childhood friends).
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.218 b/source/ap/vim/patches/7.3.218
new file mode 100644
index 00000000..1da18d81
--- /dev/null
+++ b/source/ap/vim/patches/7.3.218
@@ -0,0 +1,91 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.218
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.218 (after 7.3.212)
+Problem:    Tiny configuration problem with Python 3.
+Solution:   Add abiflags in one more place. (Andreas Behr)
+Files:      src/auto/configure, src/configure.in
+
+
+*** ../mercurial/vim73/src/auto/configure	2011-06-12 21:37:06.000000000 +0200
+--- src/auto/configure	2011-06-13 01:26:50.000000000 +0200
+***************
+*** 5607,5613 ****
+  	@echo "python3_BASEMODLIBS='$(BASEMODLIBS)'"
+  	@echo "python3_LIBS='$(LIBS)'"
+  	@echo "python3_SYSLIBS='$(SYSLIBS)'"
+- 	@echo "python3_LINKFORSHARED='$(LINKFORSHARED)'"
+  	@echo "python3_INSTSONAME='$(INSTSONAME)'"
+  eof
+                      eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+--- 5607,5612 ----
+***************
+*** 5624,5630 ****
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+              if test "x$MACOSX" = "xyes"; then
+--- 5623,5629 ----
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+              if test "x$MACOSX" = "xyes"; then
+*** ../mercurial/vim73/src/configure.in	2011-06-12 21:37:06.000000000 +0200
+--- src/configure.in	2011-06-13 01:26:35.000000000 +0200
+***************
+*** 1063,1069 ****
+  	@echo "python3_BASEMODLIBS='$(BASEMODLIBS)'"
+  	@echo "python3_LIBS='$(LIBS)'"
+  	@echo "python3_SYSLIBS='$(SYSLIBS)'"
+- 	@echo "python3_LINKFORSHARED='$(LINKFORSHARED)'"
+  	@echo "python3_INSTSONAME='$(INSTSONAME)'"
+  eof
+            dnl -- delete the lines from make about Entering/Leaving directory
+--- 1063,1068 ----
+***************
+*** 1080,1086 ****
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+        dnl For Mac OSX 10.2 config.o is included in the Python library.
+--- 1079,1085 ----
+        if test "${vi_cv_path_python3_pfx}" = "${vi_cv_path_python3_epfx}"; then
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        else
+!         PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+        dnl For Mac OSX 10.2 config.o is included in the Python library.
+*** ../vim-7.3.217/src/version.c	2011-06-13 01:19:48.000000000 +0200
+--- src/version.c	2011-06-13 01:29:42.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     218,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+174. You know what a listserv is.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.219 b/source/ap/vim/patches/7.3.219
new file mode 100644
index 00000000..2ec11179
--- /dev/null
+++ b/source/ap/vim/patches/7.3.219
@@ -0,0 +1,92 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.219
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.219
+Problem:    Can't compile with GTK on Mac.
+Solution:   Add some #ifdef trickery. (Ben Schmidt)
+Files:      src/os_mac_conv.c, src/os_macosx.m, src/vim.h
+ 
+
+*** ../mercurial/vim73/src/os_mac_conv.c	2010-08-16 21:23:30.000000000 +0200
+--- src/os_mac_conv.c	2011-06-13 01:55:17.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,21 ----
+   */
+  
+  #define NO_X11_INCLUDES
++ #define BalloonEval int   /* used in header files */
++ 
+  #include "vim.h"
+  #ifndef FEAT_GUI_MAC
+  # include <CoreServices/CoreServices.h>
+*** ../mercurial/vim73/src/os_macosx.m	2010-10-10 17:08:28.000000000 +0200
+--- src/os_macosx.m	2011-06-13 01:58:47.000000000 +0200
+***************
+*** 18,23 ****
+--- 18,24 ----
+  /* Avoid a conflict for the definition of Boolean between Mac header files and
+   * X11 header files. */
+  #define NO_X11_INCLUDES
++ #define BalloonEval int   /* used in header files */
+  
+  #include "vim.h"
+  #import <Cocoa/Cocoa.h>
+***************
+*** 27,35 ****
+   * Clipboard support for the console.
+   * Don't include this when building the GUI version, the functions in
+   * gui_mac.c are used then.  TODO: remove those instead?
+!  * But for MacVim we need these ones.
+   */
+! #if defined(FEAT_CLIPBOARD) && (!defined(FEAT_GUI) || defined(FEAT_GUI_MACVIM))
+  
+  /* Used to identify clipboard data copied from Vim. */
+  
+--- 28,36 ----
+   * Clipboard support for the console.
+   * Don't include this when building the GUI version, the functions in
+   * gui_mac.c are used then.  TODO: remove those instead?
+!  * But for MacVim we do need these ones.
+   */
+! #if defined(FEAT_CLIPBOARD) && (!defined(FEAT_GUI_ENABLED) || defined(FEAT_GUI_MACVIM))
+  
+  /* Used to identify clipboard data copied from Vim. */
+  
+*** ../mercurial/vim73/src/vim.h	2011-05-19 18:26:34.000000000 +0200
+--- src/vim.h	2011-06-13 01:57:17.000000000 +0200
+***************
+*** 121,126 ****
+--- 121,127 ----
+      || defined(FEAT_GUI_W32) \
+      || defined(FEAT_GUI_W16) \
+      || defined(FEAT_GUI_PHOTON)
++ # define FEAT_GUI_ENABLED  /* also defined with NO_X11_INCLUDES */
+  # if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES)
+  #  define FEAT_GUI
+  # endif
+*** ../vim-7.3.218/src/version.c	2011-06-13 01:32:42.000000000 +0200
+--- src/version.c	2011-06-13 02:03:02.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     219,
+  /**/
+
+-- 
+If Microsoft would build a car...
+... the oil, water temperature, and alternator warning lights would
+all be replaced by a single "General Protection Fault" warning light.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.220 b/source/ap/vim/patches/7.3.220
new file mode 100644
index 00000000..0122e7fc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.220
@@ -0,0 +1,1230 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.220
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.220
+Problem:    Python 3: vim.error is a 'str' instead of an 'Exception' object,
+            so 'except' or 'raise' it causes a 'SystemError' exception.
+            Buffer objects do not support slice assignment.
+            When exchanging text between Vim and Python, multibyte texts become
+            gabage or cause Unicode Expceptions, etc.
+            'py3file' tries to read in the file as Unicode, sometimes causes
+            UnicodeDecodeException
+Solution:   Fix the problems. (lilydjwg)
+Files:      src/if_py_both.h, src/if_python.c, src/if_python3.c
+    
+
+*** ../mercurial/vim73/src/if_py_both.h	2011-03-22 15:47:18.000000000 +0100
+--- src/if_py_both.h	2011-06-18 23:54:25.000000000 +0200
+***************
+*** 65,74 ****
+  OutputWrite(PyObject *self, PyObject *args)
+  {
+      int len;
+!     char *str;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "s#", &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+--- 65,74 ----
+  OutputWrite(PyObject *self, PyObject *args)
+  {
+      int len;
+!     char *str = NULL;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "es#", p_enc, &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+***************
+*** 76,81 ****
+--- 76,82 ----
+      writer((writefn)(error ? emsg : msg), (char_u *)str, len);
+      Python_Release_Vim();
+      Py_END_ALLOW_THREADS
++     PyMem_Free(str);
+  
+      Py_INCREF(Py_None);
+      return Py_None;
+***************
+*** 104,113 ****
+      for (i = 0; i < n; ++i)
+      {
+  	PyObject *line = PyList_GetItem(list, i);
+! 	char *str;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "s#", &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+--- 105,114 ----
+      for (i = 0; i < n; ++i)
+      {
+  	PyObject *line = PyList_GetItem(list, i);
+! 	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "es#", p_enc, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+***************
+*** 118,123 ****
+--- 119,125 ----
+  	writer((writefn)(error ? emsg : msg), (char_u *)str, len);
+  	Python_Release_Vim();
+  	Py_END_ALLOW_THREADS
++ 	PyMem_Free(str);
+      }
+  
+      Py_DECREF(list);
+***************
+*** 681,686 ****
+--- 683,689 ----
+  {
+      const char *str;
+      char *save;
++     PyObject *bytes;
+      PyInt len;
+      PyInt i;
+      char *p;
+***************
+*** 691,698 ****
+  	return NULL;
+      }
+  
+!     str = PyString_AsString(obj);
+!     len = PyString_Size(obj);
+  
+      /*
+       * Error checking: String must not contain newlines, as we
+--- 694,702 ----
+  	return NULL;
+      }
+  
+!     bytes = PyString_AsBytes(obj);  /* for Python 2 this does nothing */
+!     str = PyString_AsString(bytes);
+!     len = PyString_Size(bytes);
+  
+      /*
+       * Error checking: String must not contain newlines, as we
+***************
+*** 731,736 ****
+--- 735,741 ----
+      }
+  
+      save[i] = '\0';
++     PyString_FreeBytes(bytes);  /* Python 2 does nothing here */
+  
+      return save;
+  }
+***************
+*** 817,823 ****
+      invalidate_botline();
+  }
+  
+! /* Replace a line in the specified buffer. The line number is
+   * in Vim format (1-based). The replacement line is given as
+   * a Python string object. The object is checked for validity
+   * and correct format. Errors are returned as a value of FAIL.
+--- 822,829 ----
+      invalidate_botline();
+  }
+  
+! /*
+!  * Replace a line in the specified buffer. The line number is
+   * in Vim format (1-based). The replacement line is given as
+   * a Python string object. The object is checked for validity
+   * and correct format. Errors are returned as a value of FAIL.
+***************
+*** 908,913 ****
+--- 914,1106 ----
+      }
+  }
+  
++ /* Replace a range of lines in the specified buffer. The line numbers are in
++  * Vim format (1-based). The range is from lo up to, but not including, hi.
++  * The replacement lines are given as a Python list of string objects. The
++  * list is checked for validity and correct format. Errors are returned as a
++  * value of FAIL.  The return value is OK on success.
++  * If OK is returned and len_change is not NULL, *len_change
++  * is set to the change in the buffer length.
++  */
++     static int
++ SetBufferLineList(buf_T *buf, PyInt lo, PyInt hi, PyObject *list, PyInt *len_change)
++ {
++     /* First of all, we check the thpe of the supplied Python object.
++      * There are three cases:
++      *	  1. NULL, or None - this is a deletion.
++      *	  2. A list	   - this is a replacement.
++      *	  3. Anything else - this is an error.
++      */
++     if (list == Py_None || list == NULL)
++     {
++ 	PyInt	i;
++ 	PyInt	n = (int)(hi - lo);
++ 	buf_T	*savebuf = curbuf;
++ 
++ 	PyErr_Clear();
++ 	curbuf = buf;
++ 
++ 	if (u_savedel((linenr_T)lo, (long)n) == FAIL)
++ 	    PyErr_SetVim(_("cannot save undo information"));
++ 	else
++ 	{
++ 	    for (i = 0; i < n; ++i)
++ 	    {
++ 		if (ml_delete((linenr_T)lo, FALSE) == FAIL)
++ 		{
++ 		    PyErr_SetVim(_("cannot delete line"));
++ 		    break;
++ 		}
++ 	    }
++ 	    if (buf == curwin->w_buffer)
++ 		py_fix_cursor((linenr_T)lo, (linenr_T)hi, (linenr_T)-n);
++ 	    deleted_lines_mark((linenr_T)lo, (long)i);
++ 	}
++ 
++ 	curbuf = savebuf;
++ 
++ 	if (PyErr_Occurred() || VimErrorCheck())
++ 	    return FAIL;
++ 
++ 	if (len_change)
++ 	    *len_change = -n;
++ 
++ 	return OK;
++     }
++     else if (PyList_Check(list))
++     {
++ 	PyInt	i;
++ 	PyInt	new_len = PyList_Size(list);
++ 	PyInt	old_len = hi - lo;
++ 	PyInt	extra = 0;	/* lines added to text, can be negative */
++ 	char	**array;
++ 	buf_T	*savebuf;
++ 
++ 	if (new_len == 0)	/* avoid allocating zero bytes */
++ 	    array = NULL;
++ 	else
++ 	{
++ 	    array = (char **)alloc((unsigned)(new_len * sizeof(char *)));
++ 	    if (array == NULL)
++ 	    {
++ 		PyErr_NoMemory();
++ 		return FAIL;
++ 	    }
++ 	}
++ 
++ 	for (i = 0; i < new_len; ++i)
++ 	{
++ 	    PyObject *line = PyList_GetItem(list, i);
++ 
++ 	    array[i] = StringToLine(line);
++ 	    if (array[i] == NULL)
++ 	    {
++ 		while (i)
++ 		    vim_free(array[--i]);
++ 		vim_free(array);
++ 		return FAIL;
++ 	    }
++ 	}
++ 
++ 	savebuf = curbuf;
++ 
++ 	PyErr_Clear();
++ 	curbuf = buf;
++ 
++ 	if (u_save((linenr_T)(lo-1), (linenr_T)hi) == FAIL)
++ 	    PyErr_SetVim(_("cannot save undo information"));
++ 
++ 	/* If the size of the range is reducing (ie, new_len < old_len) we
++ 	 * need to delete some old_len. We do this at the start, by
++ 	 * repeatedly deleting line "lo".
++ 	 */
++ 	if (!PyErr_Occurred())
++ 	{
++ 	    for (i = 0; i < old_len - new_len; ++i)
++ 		if (ml_delete((linenr_T)lo, FALSE) == FAIL)
++ 		{
++ 		    PyErr_SetVim(_("cannot delete line"));
++ 		    break;
++ 		}
++ 	    extra -= i;
++ 	}
++ 
++ 	/* For as long as possible, replace the existing old_len with the
++ 	 * new old_len. This is a more efficient operation, as it requires
++ 	 * less memory allocation and freeing.
++ 	 */
++ 	if (!PyErr_Occurred())
++ 	{
++ 	    for (i = 0; i < old_len && i < new_len; ++i)
++ 		if (ml_replace((linenr_T)(lo+i), (char_u *)array[i], FALSE)
++ 								      == FAIL)
++ 		{
++ 		    PyErr_SetVim(_("cannot replace line"));
++ 		    break;
++ 		}
++ 	}
++ 	else
++ 	    i = 0;
++ 
++ 	/* Now we may need to insert the remaining new old_len. If we do, we
++ 	 * must free the strings as we finish with them (we can't pass the
++ 	 * responsibility to vim in this case).
++ 	 */
++ 	if (!PyErr_Occurred())
++ 	{
++ 	    while (i < new_len)
++ 	    {
++ 		if (ml_append((linenr_T)(lo + i - 1),
++ 					(char_u *)array[i], 0, FALSE) == FAIL)
++ 		{
++ 		    PyErr_SetVim(_("cannot insert line"));
++ 		    break;
++ 		}
++ 		vim_free(array[i]);
++ 		++i;
++ 		++extra;
++ 	    }
++ 	}
++ 
++ 	/* Free any left-over old_len, as a result of an error */
++ 	while (i < new_len)
++ 	{
++ 	    vim_free(array[i]);
++ 	    ++i;
++ 	}
++ 
++ 	/* Free the array of old_len. All of its contents have now
++ 	 * been dealt with (either freed, or the responsibility passed
++ 	 * to vim.
++ 	 */
++ 	vim_free(array);
++ 
++ 	/* Adjust marks. Invalidate any which lie in the
++ 	 * changed range, and move any in the remainder of the buffer.
++ 	 */
++ 	mark_adjust((linenr_T)lo, (linenr_T)(hi - 1),
++ 						  (long)MAXLNUM, (long)extra);
++ 	changed_lines((linenr_T)lo, 0, (linenr_T)hi, (long)extra);
++ 
++ 	if (buf == curwin->w_buffer)
++ 	    py_fix_cursor((linenr_T)lo, (linenr_T)hi, (linenr_T)extra);
++ 
++ 	curbuf = savebuf;
++ 
++ 	if (PyErr_Occurred() || VimErrorCheck())
++ 	    return FAIL;
++ 
++ 	if (len_change)
++ 	    *len_change = new_len - old_len;
++ 
++ 	return OK;
++     }
++     else
++     {
++ 	PyErr_BadArgument();
++ 	return FAIL;
++     }
++ }
+  
+  /* Insert a number of lines into the specified buffer after the specifed line.
+   * The line number is in Vim format (1-based). The lines to be inserted are
+***************
+*** 1108,1113 ****
+--- 1301,1340 ----
+  	return -1;
+  
+      if (new_end)
++ 	*new_end = end + len_change;
++ 
++     return 0;
++ }
++ 
++     static PyInt
++ RBAsSlice(BufferObject *self, PyInt lo, PyInt hi, PyObject *val, PyInt start, PyInt end, PyInt *new_end)
++ {
++     PyInt size;
++     PyInt len_change;
++ 
++     /* Self must be a valid buffer */
++     if (CheckBuffer(self))
++ 	return -1;
++ 
++     /* Sort out the slice range */
++     size = end - start + 1;
++ 
++     if (lo < 0)
++ 	lo = 0;
++     else if (lo > size)
++ 	lo = size;
++     if (hi < 0)
++ 	hi = 0;
++     if (hi < lo)
++ 	hi = lo;
++     else if (hi > size)
++ 	hi = size;
++ 
++     if (SetBufferLineList(self->buf, lo + start, hi + start,
++ 						    val, &len_change) == FAIL)
++ 	return -1;
++ 
++     if (new_end)
+  	*new_end = end + len_change;
+  
+      return 0;
+*** ../mercurial/vim73/src/if_python.c	2011-03-26 18:32:00.000000000 +0100
+--- src/if_python.c	2011-06-19 00:02:15.000000000 +0200
+***************
+*** 56,61 ****
+--- 56,65 ----
+  
+  static void init_structs(void);
+  
++ /* No-op conversion functions, use with care! */
++ #define PyString_AsBytes(obj) (obj)
++ #define PyString_FreeBytes(obj)
++ 
+  #if !defined(FEAT_PYTHON) && defined(PROTO)
+  /* Use this to be able to generate prototypes without python being used. */
+  # define PyObject Py_ssize_t
+***************
+*** 129,134 ****
+--- 133,139 ----
+   */
+  # define PyArg_Parse dll_PyArg_Parse
+  # define PyArg_ParseTuple dll_PyArg_ParseTuple
++ # define PyMem_Free dll_PyMem_Free
+  # define PyDict_SetItemString dll_PyDict_SetItemString
+  # define PyErr_BadArgument dll_PyErr_BadArgument
+  # define PyErr_Clear dll_PyErr_Clear
+***************
+*** 189,194 ****
+--- 194,200 ----
+   */
+  static int(*dll_PyArg_Parse)(PyObject *, char *, ...);
+  static int(*dll_PyArg_ParseTuple)(PyObject *, char *, ...);
++ static int(*dll_PyMem_Free)(void *);
+  static int(*dll_PyDict_SetItemString)(PyObject *dp, char *key, PyObject *item);
+  static int(*dll_PyErr_BadArgument)(void);
+  static void(*dll_PyErr_Clear)(void);
+***************
+*** 271,276 ****
+--- 277,283 ----
+  {
+      {"PyArg_Parse", (PYTHON_PROC*)&dll_PyArg_Parse},
+      {"PyArg_ParseTuple", (PYTHON_PROC*)&dll_PyArg_ParseTuple},
++     {"PyMem_Free", (PYTHON_PROC*)&dll_PyMem_Free},
+      {"PyDict_SetItemString", (PYTHON_PROC*)&dll_PyDict_SetItemString},
+      {"PyErr_BadArgument", (PYTHON_PROC*)&dll_PyErr_BadArgument},
+      {"PyErr_Clear", (PYTHON_PROC*)&dll_PyErr_Clear},
+***************
+*** 833,876 ****
+  static PyObject *CurrentGetattr(PyObject *, char *);
+  static int CurrentSetattr(PyObject *, char *, PyObject *);
+  
+- /* Common routines for buffers and line ranges
+-  * -------------------------------------------
+-  */
+- 
+-     static PyInt
+- RBAssSlice(BufferObject *self, PyInt lo, PyInt hi, PyObject *val, PyInt start, PyInt end, PyInt *new_end)
+- {
+-     PyInt size;
+-     PyInt len_change;
+- 
+-     /* Self must be a valid buffer */
+-     if (CheckBuffer(self))
+- 	return -1;
+- 
+-     /* Sort out the slice range */
+-     size = end - start + 1;
+- 
+-     if (lo < 0)
+- 	lo = 0;
+-     else if (lo > size)
+- 	lo = size;
+-     if (hi < 0)
+- 	hi = 0;
+-     if (hi < lo)
+- 	hi = lo;
+-     else if (hi > size)
+- 	hi = size;
+- 
+-     if (SetBufferLineList(self->buf, lo + start, hi + start,
+- 						    val, &len_change) == FAIL)
+- 	return -1;
+- 
+-     if (new_end)
+- 	*new_end = end + len_change;
+- 
+-     return 0;
+- }
+- 
+  static PySequenceMethods BufferAsSeq = {
+      (PyInquiry)		BufferLength,	    /* sq_length,    len(x)   */
+      (binaryfunc)	0, /* BufferConcat, */	     /* sq_concat,    x+y      */
+--- 840,845 ----
+***************
+*** 1038,1044 ****
+      static PyInt
+  BufferAssSlice(PyObject *self, PyInt lo, PyInt hi, PyObject *val)
+  {
+!     return RBAssSlice((BufferObject *)(self), lo, hi, val, 1,
+  		      (PyInt)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  		      NULL);
+  }
+--- 1007,1013 ----
+      static PyInt
+  BufferAssSlice(PyObject *self, PyInt lo, PyInt hi, PyObject *val)
+  {
+!     return RBAsSlice((BufferObject *)(self), lo, hi, val, 1,
+  		      (PyInt)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  		      NULL);
+  }
+***************
+*** 1088,1094 ****
+      static PyInt
+  RangeAssSlice(PyObject *self, PyInt lo, PyInt hi, PyObject *val)
+  {
+!     return RBAssSlice(((RangeObject *)(self))->buf, lo, hi, val,
+  		      ((RangeObject *)(self))->start,
+  		      ((RangeObject *)(self))->end,
+  		      &((RangeObject *)(self))->end);
+--- 1057,1063 ----
+      static PyInt
+  RangeAssSlice(PyObject *self, PyInt lo, PyInt hi, PyObject *val)
+  {
+!     return RBAsSlice(((RangeObject *)(self))->buf, lo, hi, val,
+  		      ((RangeObject *)(self))->start,
+  		      ((RangeObject *)(self))->end,
+  		      &((RangeObject *)(self))->end);
+***************
+*** 1435,1628 ****
+   * 4. Utility functions for handling the interface between Vim and Python.
+   */
+  
+- /* Replace a range of lines in the specified buffer. The line numbers are in
+-  * Vim format (1-based). The range is from lo up to, but not including, hi.
+-  * The replacement lines are given as a Python list of string objects. The
+-  * list is checked for validity and correct format. Errors are returned as a
+-  * value of FAIL.  The return value is OK on success.
+-  * If OK is returned and len_change is not NULL, *len_change
+-  * is set to the change in the buffer length.
+-  */
+-     static int
+- SetBufferLineList(buf_T *buf, PyInt lo, PyInt hi, PyObject *list, PyInt *len_change)
+- {
+-     /* First of all, we check the thpe of the supplied Python object.
+-      * There are three cases:
+-      *	  1. NULL, or None - this is a deletion.
+-      *	  2. A list	   - this is a replacement.
+-      *	  3. Anything else - this is an error.
+-      */
+-     if (list == Py_None || list == NULL)
+-     {
+- 	PyInt	i;
+- 	PyInt	n = (int)(hi - lo);
+- 	buf_T	*savebuf = curbuf;
+- 
+- 	PyErr_Clear();
+- 	curbuf = buf;
+- 
+- 	if (u_savedel((linenr_T)lo, (long)n) == FAIL)
+- 	    PyErr_SetVim(_("cannot save undo information"));
+- 	else
+- 	{
+- 	    for (i = 0; i < n; ++i)
+- 	    {
+- 		if (ml_delete((linenr_T)lo, FALSE) == FAIL)
+- 		{
+- 		    PyErr_SetVim(_("cannot delete line"));
+- 		    break;
+- 		}
+- 	    }
+- 	    if (buf == curwin->w_buffer)
+- 		py_fix_cursor((linenr_T)lo, (linenr_T)hi, (linenr_T)-n);
+- 	    deleted_lines_mark((linenr_T)lo, (long)i);
+- 	}
+- 
+- 	curbuf = savebuf;
+- 
+- 	if (PyErr_Occurred() || VimErrorCheck())
+- 	    return FAIL;
+- 
+- 	if (len_change)
+- 	    *len_change = -n;
+- 
+- 	return OK;
+-     }
+-     else if (PyList_Check(list))
+-     {
+- 	PyInt	i;
+- 	PyInt	new_len = PyList_Size(list);
+- 	PyInt	old_len = hi - lo;
+- 	PyInt	extra = 0;	/* lines added to text, can be negative */
+- 	char	**array;
+- 	buf_T	*savebuf;
+- 
+- 	if (new_len == 0)	/* avoid allocating zero bytes */
+- 	    array = NULL;
+- 	else
+- 	{
+- 	    array = (char **)alloc((unsigned)(new_len * sizeof(char *)));
+- 	    if (array == NULL)
+- 	    {
+- 		PyErr_NoMemory();
+- 		return FAIL;
+- 	    }
+- 	}
+- 
+- 	for (i = 0; i < new_len; ++i)
+- 	{
+- 	    PyObject *line = PyList_GetItem(list, i);
+- 
+- 	    array[i] = StringToLine(line);
+- 	    if (array[i] == NULL)
+- 	    {
+- 		while (i)
+- 		    vim_free(array[--i]);
+- 		vim_free(array);
+- 		return FAIL;
+- 	    }
+- 	}
+- 
+- 	savebuf = curbuf;
+- 
+- 	PyErr_Clear();
+- 	curbuf = buf;
+- 
+- 	if (u_save((linenr_T)(lo-1), (linenr_T)hi) == FAIL)
+- 	    PyErr_SetVim(_("cannot save undo information"));
+- 
+- 	/* If the size of the range is reducing (ie, new_len < old_len) we
+- 	 * need to delete some old_len. We do this at the start, by
+- 	 * repeatedly deleting line "lo".
+- 	 */
+- 	if (!PyErr_Occurred())
+- 	{
+- 	    for (i = 0; i < old_len - new_len; ++i)
+- 		if (ml_delete((linenr_T)lo, FALSE) == FAIL)
+- 		{
+- 		    PyErr_SetVim(_("cannot delete line"));
+- 		    break;
+- 		}
+- 	    extra -= i;
+- 	}
+- 
+- 	/* For as long as possible, replace the existing old_len with the
+- 	 * new old_len. This is a more efficient operation, as it requires
+- 	 * less memory allocation and freeing.
+- 	 */
+- 	if (!PyErr_Occurred())
+- 	{
+- 	    for (i = 0; i < old_len && i < new_len; ++i)
+- 		if (ml_replace((linenr_T)(lo+i), (char_u *)array[i], FALSE)
+- 								      == FAIL)
+- 		{
+- 		    PyErr_SetVim(_("cannot replace line"));
+- 		    break;
+- 		}
+- 	}
+- 	else
+- 	    i = 0;
+- 
+- 	/* Now we may need to insert the remaining new old_len. If we do, we
+- 	 * must free the strings as we finish with them (we can't pass the
+- 	 * responsibility to vim in this case).
+- 	 */
+- 	if (!PyErr_Occurred())
+- 	{
+- 	    while (i < new_len)
+- 	    {
+- 		if (ml_append((linenr_T)(lo + i - 1),
+- 					(char_u *)array[i], 0, FALSE) == FAIL)
+- 		{
+- 		    PyErr_SetVim(_("cannot insert line"));
+- 		    break;
+- 		}
+- 		vim_free(array[i]);
+- 		++i;
+- 		++extra;
+- 	    }
+- 	}
+- 
+- 	/* Free any left-over old_len, as a result of an error */
+- 	while (i < new_len)
+- 	{
+- 	    vim_free(array[i]);
+- 	    ++i;
+- 	}
+- 
+- 	/* Free the array of old_len. All of its contents have now
+- 	 * been dealt with (either freed, or the responsibility passed
+- 	 * to vim.
+- 	 */
+- 	vim_free(array);
+- 
+- 	/* Adjust marks. Invalidate any which lie in the
+- 	 * changed range, and move any in the remainder of the buffer.
+- 	 */
+- 	mark_adjust((linenr_T)lo, (linenr_T)(hi - 1),
+- 						  (long)MAXLNUM, (long)extra);
+- 	changed_lines((linenr_T)lo, 0, (linenr_T)hi, (long)extra);
+- 
+- 	if (buf == curwin->w_buffer)
+- 	    py_fix_cursor((linenr_T)lo, (linenr_T)hi, (linenr_T)extra);
+- 
+- 	curbuf = savebuf;
+- 
+- 	if (PyErr_Occurred() || VimErrorCheck())
+- 	    return FAIL;
+- 
+- 	if (len_change)
+- 	    *len_change = new_len - old_len;
+- 
+- 	return OK;
+-     }
+-     else
+-     {
+- 	PyErr_BadArgument();
+- 	return FAIL;
+-     }
+- }
+- 
+  /* Convert a Vim line into a Python string.
+   * All internal newlines are replaced by null characters.
+   *
+--- 1404,1409 ----
+*** ../mercurial/vim73/src/if_python3.c	2011-06-12 21:37:06.000000000 +0200
+--- src/if_python3.c	2011-06-19 00:10:42.000000000 +0200
+***************
+*** 70,77 ****
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsString(obj) _PyUnicode_AsString(obj)
+! #define PyString_Size(obj) PyUnicode_GET_SIZE(obj)
+  #define PyString_FromString(repr) PyUnicode_FromString(repr)
+  
+  #if defined(DYNAMIC_PYTHON3) || defined(PROTO)
+--- 70,79 ----
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)p_enc, NULL);
+! #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+! #define PyString_AsString(obj) PyBytes_AsString(obj)
+! #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+  #define PyString_FromString(repr) PyUnicode_FromString(repr)
+  
+  #if defined(DYNAMIC_PYTHON3) || defined(PROTO)
+***************
+*** 99,104 ****
+--- 101,107 ----
+  # define PyArg_Parse py3_PyArg_Parse
+  # undef PyArg_ParseTuple
+  # define PyArg_ParseTuple py3_PyArg_ParseTuple
++ # define PyMem_Free py3_PyMem_Free
+  # define PyDict_SetItemString py3_PyDict_SetItemString
+  # define PyErr_BadArgument py3_PyErr_BadArgument
+  # define PyErr_Clear py3_PyErr_Clear
+***************
+*** 140,147 ****
+--- 143,155 ----
+  # define PyModule_AddObject py3_PyModule_AddObject
+  # define PyImport_AppendInittab py3_PyImport_AppendInittab
+  # define _PyUnicode_AsString py3__PyUnicode_AsString
++ # undef PyUnicode_AsEncodedString
++ # define PyUnicode_AsEncodedString py3_PyUnicode_AsEncodedString
++ # undef PyBytes_AsString
++ # define PyBytes_AsString py3_PyBytes_AsString
+  # define PyObject_GenericGetAttr py3_PyObject_GenericGetAttr
+  # define PySlice_Type (*py3_PySlice_Type)
++ # define PyErr_NewException py3_PyErr_NewException
+  # ifdef Py_DEBUG
+  #  define _Py_NegativeRefcount py3__Py_NegativeRefcount
+  #  define _Py_RefTotal (*py3__Py_RefTotal)
+***************
+*** 157,164 ****
+  # define PyModule_Create2 py3_PyModule_Create2
+  # undef PyUnicode_FromString
+  # define PyUnicode_FromString py3_PyUnicode_FromString
+! # undef PyUnicode_FromStringAndSize
+! # define PyUnicode_FromStringAndSize py3_PyUnicode_FromStringAndSize
+  
+  # ifdef Py_DEBUG
+  #  undef PyObject_NEW
+--- 165,172 ----
+  # define PyModule_Create2 py3_PyModule_Create2
+  # undef PyUnicode_FromString
+  # define PyUnicode_FromString py3_PyUnicode_FromString
+! # undef PyUnicode_Decode
+! # define PyUnicode_Decode py3_PyUnicode_Decode
+  
+  # ifdef Py_DEBUG
+  #  undef PyObject_NEW
+***************
+*** 199,205 ****
+  static int (*py3_PyType_Ready)(PyTypeObject *type);
+  static int (*py3_PyDict_SetItemString)(PyObject *dp, char *key, PyObject *item);
+  static PyObject* (*py3_PyUnicode_FromString)(const char *u);
+! static PyObject* (*py3_PyUnicode_FromStringAndSize)(const char *u, Py_ssize_t size);
+  static long (*py3_PyLong_AsLong)(PyObject *);
+  static void (*py3_PyErr_SetNone)(PyObject *);
+  static void (*py3_PyEval_InitThreads)(void);
+--- 207,214 ----
+  static int (*py3_PyType_Ready)(PyTypeObject *type);
+  static int (*py3_PyDict_SetItemString)(PyObject *dp, char *key, PyObject *item);
+  static PyObject* (*py3_PyUnicode_FromString)(const char *u);
+! static PyObject* (*py3_PyUnicode_Decode)(const char *u, Py_ssize_t size,
+! 	const char *encoding, const char *errors);
+  static long (*py3_PyLong_AsLong)(PyObject *);
+  static void (*py3_PyErr_SetNone)(PyObject *);
+  static void (*py3_PyEval_InitThreads)(void);
+***************
+*** 207,212 ****
+--- 216,222 ----
+  static PyThreadState*(*py3_PyEval_SaveThread)(void);
+  static int (*py3_PyArg_Parse)(PyObject *, char *, ...);
+  static int (*py3_PyArg_ParseTuple)(PyObject *, char *, ...);
++ static int (*py3_PyMem_Free)(void *);
+  static int (*py3_Py_IsInitialized)(void);
+  static void (*py3_PyErr_Clear)(void);
+  static PyObject*(*py3__PyObject_Init)(PyObject *, PyTypeObject *);
+***************
+*** 214,224 ****
+--- 224,237 ----
+  static int (*py3_PyModule_AddObject)(PyObject *m, const char *name, PyObject *o);
+  static int (*py3_PyImport_AppendInittab)(const char *name, PyObject* (*initfunc)(void));
+  static char* (*py3__PyUnicode_AsString)(PyObject *unicode);
++ static PyObject* (*py3_PyUnicode_AsEncodedString)(PyObject *unicode, const char* encoding, const char* errors);
++ static char* (*py3_PyBytes_AsString)(PyObject *bytes);
+  static PyObject* (*py3_PyObject_GenericGetAttr)(PyObject *obj, PyObject *name);
+  static PyObject* (*py3_PyModule_Create2)(struct PyModuleDef* module, int module_api_version);
+  static PyObject* (*py3_PyType_GenericAlloc)(PyTypeObject *type, Py_ssize_t nitems);
+  static PyObject* (*py3_PyType_GenericNew)(PyTypeObject *type, PyObject *args, PyObject *kwds);
+  static PyTypeObject* py3_PySlice_Type;
++ static PyObject* (*py3_PyErr_NewException)(char *name, PyObject *base, PyObject *dict);
+  # ifdef Py_DEBUG
+      static void (*py3__Py_NegativeRefcount)(const char *fname, int lineno, PyObject *op);
+      static Py_ssize_t* py3__Py_RefTotal;
+***************
+*** 259,264 ****
+--- 272,278 ----
+      {"Py_SetPythonHome", (PYTHON_PROC*)&py3_Py_SetPythonHome},
+      {"Py_Initialize", (PYTHON_PROC*)&py3_Py_Initialize},
+      {"PyArg_ParseTuple", (PYTHON_PROC*)&py3_PyArg_ParseTuple},
++     {"PyMem_Free", (PYTHON_PROC*)&py3_PyMem_Free},
+      {"PyList_New", (PYTHON_PROC*)&py3_PyList_New},
+      {"PyGILState_Ensure", (PYTHON_PROC*)&py3_PyGILState_Ensure},
+      {"PyGILState_Release", (PYTHON_PROC*)&py3_PyGILState_Release},
+***************
+*** 289,295 ****
+      {"PyEval_RestoreThread", (PYTHON_PROC*)&py3_PyEval_RestoreThread},
+      {"PyEval_SaveThread", (PYTHON_PROC*)&py3_PyEval_SaveThread},
+      {"PyArg_Parse", (PYTHON_PROC*)&py3_PyArg_Parse},
+-     {"PyArg_ParseTuple", (PYTHON_PROC*)&py3_PyArg_ParseTuple},
+      {"Py_IsInitialized", (PYTHON_PROC*)&py3_Py_IsInitialized},
+      {"_Py_NoneStruct", (PYTHON_PROC*)&py3__Py_NoneStruct},
+      {"PyErr_Clear", (PYTHON_PROC*)&py3_PyErr_Clear},
+--- 303,308 ----
+***************
+*** 297,307 ****
+--- 310,322 ----
+      {"PyModule_AddObject", (PYTHON_PROC*)&py3_PyModule_AddObject},
+      {"PyImport_AppendInittab", (PYTHON_PROC*)&py3_PyImport_AppendInittab},
+      {"_PyUnicode_AsString", (PYTHON_PROC*)&py3__PyUnicode_AsString},
++     {"PyBytes_AsString", (PYTHON_PROC*)&py3_PyBytes_AsString},
+      {"PyObject_GenericGetAttr", (PYTHON_PROC*)&py3_PyObject_GenericGetAttr},
+      {"PyModule_Create2", (PYTHON_PROC*)&py3_PyModule_Create2},
+      {"PyType_GenericAlloc", (PYTHON_PROC*)&py3_PyType_GenericAlloc},
+      {"PyType_GenericNew", (PYTHON_PROC*)&py3_PyType_GenericNew},
+      {"PySlice_Type", (PYTHON_PROC*)&py3_PySlice_Type},
++     {"PyErr_NewException", (PYTHON_PROC*)&py3_PyErr_NewException},
+  # ifdef Py_DEBUG
+      {"_Py_NegativeRefcount", (PYTHON_PROC*)&py3__Py_NegativeRefcount},
+      {"_Py_RefTotal", (PYTHON_PROC*)&py3__Py_RefTotal},
+***************
+*** 337,343 ****
+  py3_runtime_link_init(char *libname, int verbose)
+  {
+      int i;
+!     void *ucs_from_string, *ucs_from_string_and_size;
+  
+  # if !(defined(PY_NO_RTLD_GLOBAL) && defined(PY3_NO_RTLD_GLOBAL)) && defined(UNIX) && defined(FEAT_PYTHON)
+      /* Can't have Python and Python3 loaded at the same time.
+--- 352,358 ----
+  py3_runtime_link_init(char *libname, int verbose)
+  {
+      int i;
+!     void *ucs_from_string, *ucs_decode, *ucs_as_encoded_string;
+  
+  # if !(defined(PY_NO_RTLD_GLOBAL) && defined(PY3_NO_RTLD_GLOBAL)) && defined(UNIX) && defined(FEAT_PYTHON)
+      /* Can't have Python and Python3 loaded at the same time.
+***************
+*** 377,395 ****
+      /* Load unicode functions separately as only the ucs2 or the ucs4 functions
+       * will be present in the library. */
+      ucs_from_string = symbol_from_dll(hinstPy3, "PyUnicodeUCS2_FromString");
+!     ucs_from_string_and_size = symbol_from_dll(hinstPy3,
+! 	    "PyUnicodeUCS2_FromStringAndSize");
+!     if (!ucs_from_string || !ucs_from_string_and_size)
+      {
+  	ucs_from_string = symbol_from_dll(hinstPy3,
+  		"PyUnicodeUCS4_FromString");
+! 	ucs_from_string_and_size = symbol_from_dll(hinstPy3,
+! 		"PyUnicodeUCS4_FromStringAndSize");
+      }
+!     if (ucs_from_string && ucs_from_string_and_size)
+      {
+  	py3_PyUnicode_FromString = ucs_from_string;
+! 	py3_PyUnicode_FromStringAndSize = ucs_from_string_and_size;
+      }
+      else
+      {
+--- 392,415 ----
+      /* Load unicode functions separately as only the ucs2 or the ucs4 functions
+       * will be present in the library. */
+      ucs_from_string = symbol_from_dll(hinstPy3, "PyUnicodeUCS2_FromString");
+!     ucs_decode = symbol_from_dll(hinstPy3,
+! 	    "PyUnicodeUCS2_Decode");
+!     ucs_as_encoded_string = symbol_from_dll(hinstPy3,
+! 	    "PyUnicodeUCS2_AsEncodedString");
+!     if (!ucs_from_string || !ucs_decode || !ucs_as_encoded_string)
+      {
+  	ucs_from_string = symbol_from_dll(hinstPy3,
+  		"PyUnicodeUCS4_FromString");
+! 	ucs_decode = symbol_from_dll(hinstPy3,
+! 		"PyUnicodeUCS4_Decode");
+! 	ucs_as_encoded_string = symbol_from_dll(hinstPy3,
+! 		"PyUnicodeUCS4_AsEncodedString");
+      }
+!     if (ucs_from_string && ucs_decode && ucs_as_encoded_string)
+      {
+  	py3_PyUnicode_FromString = ucs_from_string;
+! 	py3_PyUnicode_Decode = ucs_decode;
+! 	py3_PyUnicode_AsEncodedString = ucs_as_encoded_string;
+      }
+      else
+      {
+***************
+*** 567,574 ****
+  	/* Remove the element from sys.path that was added because of our
+  	 * argv[0] value in Py3Init_vim().  Previously we used an empty
+  	 * string, but dependinding on the OS we then get an empty entry or
+! 	 * the current directory in sys.path. */
+! 	PyRun_SimpleString("import sys; sys.path = list(filter(lambda x: x != '/must>not&exist', sys.path))");
+  
+  	// lock is created and acquired in PyEval_InitThreads() and thread
+  	// state is created in Py_Initialize()
+--- 587,597 ----
+  	/* Remove the element from sys.path that was added because of our
+  	 * argv[0] value in Py3Init_vim().  Previously we used an empty
+  	 * string, but dependinding on the OS we then get an empty entry or
+! 	 * the current directory in sys.path.
+! 	 * Only after vim has been imported, the element does exist in
+! 	 * sys.path.
+! 	 */
+! 	PyRun_SimpleString("import vim; import sys; sys.path = list(filter(lambda x: not x.endswith('must>not&exist'), sys.path))");
+  
+  	// lock is created and acquired in PyEval_InitThreads() and thread
+  	// state is created in Py_Initialize()
+***************
+*** 605,610 ****
+--- 628,635 ----
+  #if defined(HAVE_LOCALE_H) || defined(X_LOCALE)
+      char		*saved_locale;
+  #endif
++     PyObject		*cmdstr;
++     PyObject		*cmdbytes;
+  
+  #if defined(MACOS) && !defined(MACOS_X_UNIX)
+      GetPort(&oldPort);
+***************
+*** 634,640 ****
+  
+      pygilstate = PyGILState_Ensure();
+  
+!     PyRun_SimpleString((char *)(cmd));
+  
+      PyGILState_Release(pygilstate);
+  
+--- 659,671 ----
+  
+      pygilstate = PyGILState_Ensure();
+  
+!     /* PyRun_SimpleString expects a UTF-8 string. Wrong encoding may cause
+!      * SyntaxError (unicode error). */
+!     cmdstr = PyUnicode_Decode(cmd, strlen(cmd), (char *)p_enc, NULL);
+!     cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", NULL);
+!     Py_XDECREF(cmdstr);
+!     PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+!     Py_XDECREF(cmdbytes);
+  
+      PyGILState_Release(pygilstate);
+  
+***************
+*** 693,699 ****
+       * different options under Windows, meaning that stdio pointers aren't
+       * compatible between the two. Yuk.
+       *
+!      * construct: exec(compile(open('a_filename').read(), 'a_filename', 'exec'))
+       *
+       * We need to escape any backslashes or single quotes in the file name, so that
+       * Python won't mangle the file name.
+--- 724,733 ----
+       * different options under Windows, meaning that stdio pointers aren't
+       * compatible between the two. Yuk.
+       *
+!      * construct: exec(compile(open('a_filename', 'rb').read(), 'a_filename', 'exec'))
+!      *
+!      * Using bytes so that Python can detect the source encoding as it normally
+!      * does. The doc does not say "compile" accept bytes, though.
+       *
+       * We need to escape any backslashes or single quotes in the file name, so that
+       * Python won't mangle the file name.
+***************
+*** 716,723 ****
+  	    return;
+  	if (i==0)
+  	{
+! 	    strcpy(p,"').read(),'");
+! 	    p += 11;
+  	}
+  	else
+  	{
+--- 750,757 ----
+  	    return;
+  	if (i==0)
+  	{
+! 	    strcpy(p,"','rb').read(),'");
+! 	    p += 16;
+  	}
+  	else
+  	{
+***************
+*** 812,819 ****
+  
+  static Py_ssize_t BufferLength(PyObject *);
+  static PyObject *BufferItem(PyObject *, Py_ssize_t);
+- static Py_ssize_t BufferAsItem(PyObject *, Py_ssize_t, PyObject *);
+  static PyObject* BufferSubscript(PyObject *self, PyObject* idx);
+  
+  
+  /* Line range type - Implementation functions
+--- 846,853 ----
+  
+  static Py_ssize_t BufferLength(PyObject *);
+  static PyObject *BufferItem(PyObject *, Py_ssize_t);
+  static PyObject* BufferSubscript(PyObject *self, PyObject* idx);
++ static Py_ssize_t BufferAsSubscript(PyObject *self, PyObject* idx, PyObject* val);
+  
+  
+  /* Line range type - Implementation functions
+***************
+*** 835,841 ****
+      (ssizeargfunc)	0,		    /* sq_repeat,    x*n      */
+      (ssizeargfunc)	BufferItem,	    /* sq_item,      x[i]     */
+      0,					    /* was_sq_slice,	 x[i:j]   */
+!     (ssizeobjargproc)	BufferAsItem,	    /* sq_ass_item,  x[i]=v   */
+      0,					    /* sq_ass_slice, x[i:j]=v */
+      0,					    /* sq_contains */
+      0,					    /* sq_inplace_concat */
+--- 869,875 ----
+      (ssizeargfunc)	0,		    /* sq_repeat,    x*n      */
+      (ssizeargfunc)	BufferItem,	    /* sq_item,      x[i]     */
+      0,					    /* was_sq_slice,	 x[i:j]   */
+!     0,					    /* sq_ass_item,  x[i]=v   */
+      0,					    /* sq_ass_slice, x[i:j]=v */
+      0,					    /* sq_contains */
+      0,					    /* sq_inplace_concat */
+***************
+*** 845,851 ****
+  PyMappingMethods BufferAsMapping = {
+      /* mp_length	*/ (lenfunc)BufferLength,
+      /* mp_subscript     */ (binaryfunc)BufferSubscript,
+!     /* mp_ass_subscript */ (objobjargproc)0,
+  };
+  
+  
+--- 879,885 ----
+  PyMappingMethods BufferAsMapping = {
+      /* mp_length	*/ (lenfunc)BufferLength,
+      /* mp_subscript     */ (binaryfunc)BufferSubscript,
+!     /* mp_ass_subscript */ (objobjargproc)BufferAsSubscript,
+  };
+  
+  
+***************
+*** 897,902 ****
+--- 931,938 ----
+  
+      if (this->buf && this->buf != INVALID_BUFFER_VALUE)
+  	this->buf->b_python3_ref = NULL;
++ 
++     Py_TYPE(self)->tp_free((PyObject*)self);
+  }
+  
+      static PyObject *
+***************
+*** 975,989 ****
+  	       (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count);
+  }
+  
+-     static Py_ssize_t
+- BufferAsItem(PyObject *self, Py_ssize_t n, PyObject *val)
+- {
+-     return RBAsItem((BufferObject *)(self), n, val, 1,
+- 		(Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+- 		NULL);
+- }
+- 
+- 
+      static PyObject *
+  BufferSubscript(PyObject *self, PyObject* idx)
+  {
+--- 1011,1016 ----
+***************
+*** 999,1011 ****
+  	      &step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return BufferSlice(self,start,stop+1);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+  }
+  
+  static PySequenceMethods RangeAsSeq = {
+      (lenfunc)		RangeLength,	 /* sq_length,	  len(x)   */
+      (binaryfunc)	0,		 /* RangeConcat, sq_concat,  x+y   */
+--- 1026,1064 ----
+  	      &step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return BufferSlice(self,start,stop);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+  }
+  
++     static Py_ssize_t
++ BufferAsSubscript(PyObject *self, PyObject* idx, PyObject* val)
++ {
++     if (PyLong_Check(idx)) {
++ 	long n = PyLong_AsLong(idx);
++ 	return RBAsItem((BufferObject *)(self), n, val, 1,
++ 		    (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count,
++ 		    NULL);
++     } else if (PySlice_Check(idx)) {
++ 	Py_ssize_t start, stop, step, slicelen;
++ 
++ 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
++ 	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
++ 	      &start, &stop,
++ 	      &step, &slicelen) < 0) {
++ 	    return -1;
++ 	}
++ 	return RBAsSlice((BufferObject *)(self), start, stop, val, 1,
++ 			  (PyInt)((BufferObject *)(self))->buf->b_ml.ml_line_count,
++ 			  NULL);
++     } else {
++ 	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
++ 	return -1;
++     }
++ }
++ 
+  static PySequenceMethods RangeAsSeq = {
+      (lenfunc)		RangeLength,	 /* sq_length,	  len(x)   */
+      (binaryfunc)	0,		 /* RangeConcat, sq_concat,  x+y   */
+***************
+*** 1032,1037 ****
+--- 1085,1091 ----
+  RangeDestructor(PyObject *self)
+  {
+      Py_DECREF(((RangeObject *)(self))->buf);
++     Py_TYPE(self)->tp_free((PyObject*)self);
+  }
+  
+      static PyObject *
+***************
+*** 1159,1164 ****
+--- 1213,1220 ----
+  
+      if (this->win && this->win != INVALID_WINDOW_VALUE)
+  	this->win->w_python3_ref = NULL;
++ 
++     Py_TYPE(self)->tp_free((PyObject*)self);
+  }
+  
+      static PyObject *
+***************
+*** 1350,1357 ****
+      PySys_SetArgv(1, argv);
+  
+      mod = PyModule_Create(&vimmodule);
+  
+!     VimError = Py_BuildValue("s", "vim.error");
+  
+      PyModule_AddObject(mod, "error", VimError);
+      Py_INCREF((PyObject *)(void *)&TheBufferList);
+--- 1406,1416 ----
+      PySys_SetArgv(1, argv);
+  
+      mod = PyModule_Create(&vimmodule);
++     if (mod == NULL)
++ 	return NULL;
+  
+!     VimError = PyErr_NewException("vim.error", NULL, NULL);
+!     Py_INCREF(VimError);
+  
+      PyModule_AddObject(mod, "error", VimError);
+      Py_INCREF((PyObject *)(void *)&TheBufferList);
+***************
+*** 1404,1410 ****
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_FromStringAndSize(tmp, len);
+  
+      vim_free(tmp);
+      return result;
+--- 1463,1469 ----
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_Decode(tmp, len, (char *)p_enc, NULL);
+  
+      vim_free(tmp);
+      return result;
+*** ../vim-7.3.219/src/version.c	2011-06-13 02:03:55.000000000 +0200
+--- src/version.c	2011-06-19 00:25:38.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     220,
+  /**/
+
+-- 
+I'm in shape.  Round IS a shape.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.221 b/source/ap/vim/patches/7.3.221
new file mode 100644
index 00000000..7211a4a6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.221
@@ -0,0 +1,287 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.221
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.221
+Problem:    Text from the clipboard is sometimes handled as linewise, but not
+            consistently.
+Solution:   Assume the text is linewise when it ends in a CR or NL.
+Files:      src/gui_gtk_x11.c, src/gui_mac.c, src/ops.c, src/os_msdos.c,
+            src/os_mswin.c, src/os_qnx.c, src/ui.c
+
+
+*** ../mercurial/vim73/src/gui_gtk_x11.c	2011-02-25 17:10:22.000000000 +0100
+--- src/gui_gtk_x11.c	2011-06-19 00:58:31.000000000 +0200
+***************
+*** 1173,1179 ****
+      char_u	    *tmpbuf = NULL;
+      guchar	    *tmpbuf_utf8 = NULL;
+      int		    len;
+!     int		    motion_type;
+  
+      if (data->selection == clip_plus.gtk_sel_atom)
+  	cbd = &clip_plus;
+--- 1173,1179 ----
+      char_u	    *tmpbuf = NULL;
+      guchar	    *tmpbuf_utf8 = NULL;
+      int		    len;
+!     int		    motion_type = MAUTO;
+  
+      if (data->selection == clip_plus.gtk_sel_atom)
+  	cbd = &clip_plus;
+***************
+*** 1182,1188 ****
+  
+      text = (char_u *)data->data;
+      len  = data->length;
+-     motion_type = MCHAR;
+  
+      if (text == NULL || len <= 0)
+      {
+--- 1182,1187 ----
+*** ../mercurial/vim73/src/gui_mac.c	2011-06-12 20:33:30.000000000 +0200
+--- src/gui_mac.c	2011-06-19 00:59:07.000000000 +0200
+***************
+*** 4671,4677 ****
+      if (flavor)
+  	type = **textOfClip;
+      else
+! 	type = (strchr(*textOfClip, '\r') != NULL) ? MLINE : MCHAR;
+  
+      tempclip = lalloc(scrapSize + 1, TRUE);
+      mch_memmove(tempclip, *textOfClip + flavor, scrapSize);
+--- 4671,4677 ----
+      if (flavor)
+  	type = **textOfClip;
+      else
+! 	type = MAUTO;
+  
+      tempclip = lalloc(scrapSize + 1, TRUE);
+      mch_memmove(tempclip, *textOfClip + flavor, scrapSize);
+*** ../mercurial/vim73/src/ops.c	2011-04-01 16:28:33.000000000 +0200
+--- src/ops.c	2011-06-19 00:59:39.000000000 +0200
+***************
+*** 5733,5739 ****
+      }
+  }
+  
+! /* Convert from the GUI selection string into the '*'/'+' register */
+      void
+  clip_yank_selection(type, str, len, cbd)
+      int		type;
+--- 5733,5741 ----
+      }
+  }
+  
+! /*
+!  * Convert from the GUI selection string into the '*'/'+' register.
+!  */
+      void
+  clip_yank_selection(type, str, len, cbd)
+      int		type;
+***************
+*** 6090,6098 ****
+      if (yank_type == MBLOCK)
+  	yank_type = MAUTO;
+  #endif
+-     if (yank_type == MAUTO)
+- 	yank_type = ((len > 0 && (str[len - 1] == '\n' || str[len - 1] == '\r'))
+- 							     ? MLINE : MCHAR);
+      str_to_reg(y_current, yank_type, str, len, block_len);
+  
+  # ifdef FEAT_CLIPBOARD
+--- 6092,6097 ----
+***************
+*** 6113,6125 ****
+   * is appended.
+   */
+      static void
+! str_to_reg(y_ptr, type, str, len, blocklen)
+      struct yankreg	*y_ptr;		/* pointer to yank register */
+!     int			type;		/* MCHAR, MLINE or MBLOCK */
+      char_u		*str;		/* string to put in register */
+      long		len;		/* length of string */
+      long		blocklen;	/* width of Visual block */
+  {
+      int		lnum;
+      long	start;
+      long	i;
+--- 6112,6125 ----
+   * is appended.
+   */
+      static void
+! str_to_reg(y_ptr, yank_type, str, len, blocklen)
+      struct yankreg	*y_ptr;		/* pointer to yank register */
+!     int			yank_type;	/* MCHAR, MLINE, MBLOCK, MAUTO */
+      char_u		*str;		/* string to put in register */
+      long		len;		/* length of string */
+      long		blocklen;	/* width of Visual block */
+  {
++     int		type;			/* MCHAR, MLINE or MBLOCK */
+      int		lnum;
+      long	start;
+      long	i;
+***************
+*** 6136,6141 ****
+--- 6136,6147 ----
+      if (y_ptr->y_array == NULL)		/* NULL means empty register */
+  	y_ptr->y_size = 0;
+  
++     if (yank_type == MAUTO)
++ 	type = ((len > 0 && (str[len - 1] == NL || str[len - 1] == CAR))
++ 							     ? MLINE : MCHAR);
++     else
++ 	type = yank_type;
++ 
+      /*
+       * Count the number of lines within the string
+       */
+*** ../mercurial/vim73/src/os_msdos.c	2010-12-17 18:06:00.000000000 +0100
+--- src/os_msdos.c	2011-06-19 01:00:56.000000000 +0200
+***************
+*** 2232,2238 ****
+      void
+  clip_mch_request_selection(VimClipboard *cbd)
+  {
+!     int		type = MCHAR;
+      char_u	*pAllocated = NULL;
+      char_u	*pClipText = NULL;
+      int		clip_data_format = 0;
+--- 2232,2238 ----
+      void
+  clip_mch_request_selection(VimClipboard *cbd)
+  {
+!     int		type = MAUTO;
+      char_u	*pAllocated = NULL;
+      char_u	*pClipText = NULL;
+      int		clip_data_format = 0;
+***************
+*** 2280,2293 ****
+  	{
+  	    clip_data_format = CF_TEXT;
+  	    pClipText = pAllocated;
+- 	    type = (vim_strchr((char*)pClipText, '\r') != NULL) ? MLINE : MCHAR;
+  	}
+  
+  	else if ((pAllocated = Win16GetClipboardData(CF_OEMTEXT)) != NULL)
+  	{
+  	    clip_data_format = CF_OEMTEXT;
+  	    pClipText = pAllocated;
+- 	    type = (vim_strchr((char*)pClipText, '\r') != NULL) ? MLINE : MCHAR;
+  	}
+  
+  	/* Did we get anything? */
+--- 2280,2291 ----
+*** ../mercurial/vim73/src/os_mswin.c	2011-01-17 20:08:04.000000000 +0100
+--- src/os_mswin.c	2011-06-19 01:01:51.000000000 +0200
+***************
+*** 1410,1418 ****
+      {
+  	char_u *temp_clipboard;
+  
+! 	/* If the type is not known guess it. */
+  	if (metadata.type == -1)
+! 	    metadata.type = (vim_strchr(str, '\n') == NULL) ? MCHAR : MLINE;
+  
+  	/* Translate <CR><NL> into <NL>. */
+  	temp_clipboard = crnl_to_nl(str, &str_size);
+--- 1410,1418 ----
+      {
+  	char_u *temp_clipboard;
+  
+! 	/* If the type is not known detect it. */
+  	if (metadata.type == -1)
+! 	    metadata.type = MAUTO;
+  
+  	/* Translate <CR><NL> into <NL>. */
+  	temp_clipboard = crnl_to_nl(str, &str_size);
+*** ../mercurial/vim73/src/os_qnx.c	2010-05-15 21:22:11.000000000 +0200
+--- src/os_qnx.c	2011-06-19 01:02:26.000000000 +0200
+***************
+*** 93,99 ****
+  	    clip_length  = clip_header->length - 1;
+  
+  	    if( clip_text != NULL && is_type_set == FALSE )
+! 		type = (strchr( clip_text, '\r' ) != NULL) ? MLINE : MCHAR;
+  	}
+  
+  	if( (clip_text != NULL) && (clip_length > 0) )
+--- 93,99 ----
+  	    clip_length  = clip_header->length - 1;
+  
+  	    if( clip_text != NULL && is_type_set == FALSE )
+! 		type = MAUTO;
+  	}
+  
+  	if( (clip_text != NULL) && (clip_length > 0) )
+*** ../mercurial/vim73/src/ui.c	2010-09-21 22:09:28.000000000 +0200
+--- src/ui.c	2011-06-19 01:03:31.000000000 +0200
+***************
+*** 1609,1615 ****
+  
+  #if defined(FEAT_HANGULIN) || defined(PROTO)
+      void
+! push_raw_key (s, len)
+      char_u  *s;
+      int	    len;
+  {
+--- 1609,1615 ----
+  
+  #if defined(FEAT_HANGULIN) || defined(PROTO)
+      void
+! push_raw_key(s, len)
+      char_u  *s;
+      int	    len;
+  {
+***************
+*** 2016,2022 ****
+      long_u	*length;
+      int		*format;
+  {
+!     int		motion_type;
+      long_u	len;
+      char_u	*p;
+      char	**text_list = NULL;
+--- 2016,2022 ----
+      long_u	*length;
+      int		*format;
+  {
+!     int		motion_type = MAUTO;
+      long_u	len;
+      char_u	*p;
+      char	**text_list = NULL;
+***************
+*** 2036,2042 ****
+  	*(int *)success = FALSE;
+  	return;
+      }
+-     motion_type = MCHAR;
+      p = (char_u *)value;
+      len = *length;
+      if (*type == vim_atom)
+--- 2036,2041 ----
+*** ../vim-7.3.220/src/version.c	2011-06-19 00:27:46.000000000 +0200
+--- src/version.c	2011-06-19 01:03:59.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     221,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+190. You quickly hand over your wallet, leather jacket, and car keys
+     during a mugging, then proceed to beat the crap out of your
+     assailant when he asks for your laptop.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.222 b/source/ap/vim/patches/7.3.222
new file mode 100644
index 00000000..87151b5a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.222
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.22
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.222
+Problem:    Warning for building GvimExt.
+Solution:   Comment-out the DESCRIPTION line. (Mike Williams)
+Files:      src/GvimExt/gvimext.def, src/GvimExt/gvimext_ming.def
+
+
+*** ../mercurial/vim73/src/GvimExt/gvimext.def	2010-05-15 21:22:11.000000000 +0200
+--- src/GvimExt/gvimext.def	2011-06-15 03:50:55.000000000 +0200
+***************
+*** 1,7 ****
+  ;gvimdef.def : Declares the module parameters for the DLL.
+  
+  LIBRARY      gvimext
+! DESCRIPTION  'Vim Shell Extension'
+  
+  EXPORTS
+      DllCanUnloadNow private
+--- 1,7 ----
+  ;gvimdef.def : Declares the module parameters for the DLL.
+  
+  LIBRARY      gvimext
+! ; DESCRIPTION  'Vim Shell Extension'
+  
+  EXPORTS
+      DllCanUnloadNow private
+*** ../mercurial/vim73/src/GvimExt/gvimext_ming.def	2010-05-15 21:22:11.000000000 +0200
+--- src/GvimExt/gvimext_ming.def	2011-06-15 03:51:05.000000000 +0200
+***************
+*** 3,9 ****
+  ;Hence this is the same file as gvimext.def with private removed
+  
+  LIBRARY      gvimext
+! DESCRIPTION  'Vim Shell Extension build with MinGW'
+  
+  EXPORTS
+      DllCanUnloadNow = DllCanUnloadNow@0
+--- 3,9 ----
+  ;Hence this is the same file as gvimext.def with private removed
+  
+  LIBRARY      gvimext
+! ; DESCRIPTION  'Vim Shell Extension build with MinGW'
+  
+  EXPORTS
+      DllCanUnloadNow = DllCanUnloadNow@0
+*** ../vim-7.3.221/src/version.c	2011-06-19 01:14:23.000000000 +0200
+--- src/version.c	2011-06-19 01:26:57.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     222,
+  /**/
+
+-- 
+What is the difference between a professional and an amateur?
+The ark was built by an amateur; professionals gave us the Titanic.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.223 b/source/ap/vim/patches/7.3.223
new file mode 100644
index 00000000..e151c5b7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.223
@@ -0,0 +1,387 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.223
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.223
+Problem:    MingW cross compilation doesn't work with tiny features.
+Solution:   Move acp_to_enc(), enc_to_utf16() and utf16_to_enc() outside of
+            "#ifdef CLIPBOARD".  Fix typo in makefile.
+Files:      src/Make_ming.mak, src/os_mswin.c
+
+
+*** ../mercurial/vim73/src/Make_ming.mak	2010-12-30 14:50:46.000000000 +0100
+--- src/Make_ming.mak	2011-06-19 01:20:16.000000000 +0200
+***************
+*** 87,93 ****
+  
+  # If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext
+  # or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/
+! # uncomment the following, but I can't build a static versión with them, ?-(|
+  #GETTEXT=c:/gettext-0.10.37-20010430
+  #STATIC_GETTEXT=USE_STATIC_GETTEXT
+  #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
+--- 87,93 ----
+  
+  # If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext
+  # or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/
+! # uncomment the following, but I can't build a static version with them, ?-(|
+  #GETTEXT=c:/gettext-0.10.37-20010430
+  #STATIC_GETTEXT=USE_STATIC_GETTEXT
+  #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
+*** ../mercurial/vim73/src/os_mswin.c	2011-06-19 01:14:23.000000000 +0200
+--- src/os_mswin.c	2011-06-19 01:25:23.000000000 +0200
+***************
+*** 1105,1236 ****
+      return ret;
+  }
+  
+- #if defined(FEAT_MBYTE) || defined(PROTO)
+- /*
+-  * Note: the following two functions are only guaranteed to work when using
+-  * valid MS-Windows codepages or when iconv() is available.
+-  */
+- 
+- /*
+-  * Convert "str" from 'encoding' to UTF-16.
+-  * Input in "str" with length "*lenp".  When "lenp" is NULL, use strlen().
+-  * Output is returned as an allocated string.  "*lenp" is set to the length of
+-  * the result.  A trailing NUL is always added.
+-  * Returns NULL when out of memory.
+-  */
+-     short_u *
+- enc_to_utf16(char_u *str, int *lenp)
+- {
+-     vimconv_T	conv;
+-     WCHAR	*ret;
+-     char_u	*allocbuf = NULL;
+-     int		len_loc;
+-     int		length;
+- 
+-     if (lenp == NULL)
+-     {
+- 	len_loc = (int)STRLEN(str) + 1;
+- 	lenp = &len_loc;
+-     }
+- 
+-     if (enc_codepage > 0)
+-     {
+- 	/* We can do any CP### -> UTF-16 in one pass, and we can do it
+- 	 * without iconv() (convert_* may need iconv). */
+- 	MultiByteToWideChar_alloc(enc_codepage, 0, str, *lenp, &ret, &length);
+-     }
+-     else
+-     {
+- 	/* Use "latin1" by default, we might be called before we have p_enc
+- 	 * set up.  Convert to utf-8 first, works better with iconv().  Does
+- 	 * nothing if 'encoding' is "utf-8". */
+- 	conv.vc_type = CONV_NONE;
+- 	if (convert_setup(&conv, p_enc ? p_enc : (char_u *)"latin1",
+- 						   (char_u *)"utf-8") == FAIL)
+- 	    return NULL;
+- 	if (conv.vc_type != CONV_NONE)
+- 	{
+- 	    str = allocbuf = string_convert(&conv, str, lenp);
+- 	    if (str == NULL)
+- 		return NULL;
+- 	}
+- 	convert_setup(&conv, NULL, NULL);
+- 
+- 	length = utf8_to_utf16(str, *lenp, NULL, NULL);
+- 	ret = (WCHAR *)alloc((unsigned)((length + 1) * sizeof(WCHAR)));
+- 	if (ret != NULL)
+- 	{
+- 	    utf8_to_utf16(str, *lenp, (short_u *)ret, NULL);
+- 	    ret[length] = 0;
+- 	}
+- 
+- 	vim_free(allocbuf);
+-     }
+- 
+-     *lenp = length;
+-     return (short_u *)ret;
+- }
+- 
+- /*
+-  * Convert an UTF-16 string to 'encoding'.
+-  * Input in "str" with length (counted in wide characters) "*lenp".  When
+-  * "lenp" is NULL, use wcslen().
+-  * Output is returned as an allocated string.  If "*lenp" is not NULL it is
+-  * set to the length of the result.
+-  * Returns NULL when out of memory.
+-  */
+-     char_u *
+- utf16_to_enc(short_u *str, int *lenp)
+- {
+-     vimconv_T	conv;
+-     char_u	*utf8_str = NULL, *enc_str = NULL;
+-     int		len_loc;
+- 
+-     if (lenp == NULL)
+-     {
+- 	len_loc = (int)wcslen(str) + 1;
+- 	lenp = &len_loc;
+-     }
+- 
+-     if (enc_codepage > 0)
+-     {
+- 	/* We can do any UTF-16 -> CP### in one pass. */
+- 	int length;
+- 
+- 	WideCharToMultiByte_alloc(enc_codepage, 0, str, *lenp,
+- 					    (LPSTR *)&enc_str, &length, 0, 0);
+- 	*lenp = length;
+- 	return enc_str;
+-     }
+- 
+-     /* Avoid allocating zero bytes, it generates an error message. */
+-     utf8_str = alloc(utf16_to_utf8(str, *lenp == 0 ? 1 : *lenp, NULL));
+-     if (utf8_str != NULL)
+-     {
+- 	*lenp = utf16_to_utf8(str, *lenp, utf8_str);
+- 
+- 	/* We might be called before we have p_enc set up. */
+- 	conv.vc_type = CONV_NONE;
+- 	convert_setup(&conv, (char_u *)"utf-8",
+- 					    p_enc? p_enc: (char_u *)"latin1");
+- 	if (conv.vc_type == CONV_NONE)
+- 	{
+- 	    /* p_enc is utf-8, so we're done. */
+- 	    enc_str = utf8_str;
+- 	}
+- 	else
+- 	{
+- 	    enc_str = string_convert(&conv, utf8_str, lenp);
+- 	    vim_free(utf8_str);
+- 	}
+- 
+- 	convert_setup(&conv, NULL, NULL);
+-     }
+- 
+-     return enc_str;
+- }
+- #endif /* FEAT_MBYTE */
+- 
+  /*
+   * Wait for another process to Close the Clipboard.
+   * Returns TRUE for success.
+--- 1105,1110 ----
+***************
+*** 1436,1467 ****
+  #endif
+  }
+  
+- #if (defined(FEAT_MBYTE) && defined(WIN3264)) || defined(PROTO)
+- /*
+-  * Convert from the active codepage to 'encoding'.
+-  * Input is "str[str_size]".
+-  * The result is in allocated memory: "out[outlen]".  With terminating NUL.
+-  */
+-     void
+- acp_to_enc(str, str_size, out, outlen)
+-     char_u	*str;
+-     int		str_size;
+-     char_u	**out;
+-     int		*outlen;
+- 
+- {
+-     LPWSTR	widestr;
+- 
+-     MultiByteToWideChar_alloc(GetACP(), 0, str, str_size, &widestr, outlen);
+-     if (widestr != NULL)
+-     {
+- 	++*outlen;	/* Include the 0 after the string */
+- 	*out = utf16_to_enc((short_u *)widestr, outlen);
+- 	vim_free(widestr);
+-     }
+- }
+- #endif
+- 
+  /*
+   * Send the current selection to the clipboard.
+   */
+--- 1310,1315 ----
+***************
+*** 1626,1631 ****
+--- 1474,1631 ----
+  
+  #endif /* FEAT_CLIPBOARD */
+  
++ #if defined(FEAT_MBYTE) || defined(PROTO)
++ /*
++  * Note: the following two functions are only guaranteed to work when using
++  * valid MS-Windows codepages or when iconv() is available.
++  */
++ 
++ /*
++  * Convert "str" from 'encoding' to UTF-16.
++  * Input in "str" with length "*lenp".  When "lenp" is NULL, use strlen().
++  * Output is returned as an allocated string.  "*lenp" is set to the length of
++  * the result.  A trailing NUL is always added.
++  * Returns NULL when out of memory.
++  */
++     short_u *
++ enc_to_utf16(char_u *str, int *lenp)
++ {
++     vimconv_T	conv;
++     WCHAR	*ret;
++     char_u	*allocbuf = NULL;
++     int		len_loc;
++     int		length;
++ 
++     if (lenp == NULL)
++     {
++ 	len_loc = (int)STRLEN(str) + 1;
++ 	lenp = &len_loc;
++     }
++ 
++     if (enc_codepage > 0)
++     {
++ 	/* We can do any CP### -> UTF-16 in one pass, and we can do it
++ 	 * without iconv() (convert_* may need iconv). */
++ 	MultiByteToWideChar_alloc(enc_codepage, 0, str, *lenp, &ret, &length);
++     }
++     else
++     {
++ 	/* Use "latin1" by default, we might be called before we have p_enc
++ 	 * set up.  Convert to utf-8 first, works better with iconv().  Does
++ 	 * nothing if 'encoding' is "utf-8". */
++ 	conv.vc_type = CONV_NONE;
++ 	if (convert_setup(&conv, p_enc ? p_enc : (char_u *)"latin1",
++ 						   (char_u *)"utf-8") == FAIL)
++ 	    return NULL;
++ 	if (conv.vc_type != CONV_NONE)
++ 	{
++ 	    str = allocbuf = string_convert(&conv, str, lenp);
++ 	    if (str == NULL)
++ 		return NULL;
++ 	}
++ 	convert_setup(&conv, NULL, NULL);
++ 
++ 	length = utf8_to_utf16(str, *lenp, NULL, NULL);
++ 	ret = (WCHAR *)alloc((unsigned)((length + 1) * sizeof(WCHAR)));
++ 	if (ret != NULL)
++ 	{
++ 	    utf8_to_utf16(str, *lenp, (short_u *)ret, NULL);
++ 	    ret[length] = 0;
++ 	}
++ 
++ 	vim_free(allocbuf);
++     }
++ 
++     *lenp = length;
++     return (short_u *)ret;
++ }
++ 
++ /*
++  * Convert an UTF-16 string to 'encoding'.
++  * Input in "str" with length (counted in wide characters) "*lenp".  When
++  * "lenp" is NULL, use wcslen().
++  * Output is returned as an allocated string.  If "*lenp" is not NULL it is
++  * set to the length of the result.
++  * Returns NULL when out of memory.
++  */
++     char_u *
++ utf16_to_enc(short_u *str, int *lenp)
++ {
++     vimconv_T	conv;
++     char_u	*utf8_str = NULL, *enc_str = NULL;
++     int		len_loc;
++ 
++     if (lenp == NULL)
++     {
++ 	len_loc = (int)wcslen(str) + 1;
++ 	lenp = &len_loc;
++     }
++ 
++     if (enc_codepage > 0)
++     {
++ 	/* We can do any UTF-16 -> CP### in one pass. */
++ 	int length;
++ 
++ 	WideCharToMultiByte_alloc(enc_codepage, 0, str, *lenp,
++ 					    (LPSTR *)&enc_str, &length, 0, 0);
++ 	*lenp = length;
++ 	return enc_str;
++     }
++ 
++     /* Avoid allocating zero bytes, it generates an error message. */
++     utf8_str = alloc(utf16_to_utf8(str, *lenp == 0 ? 1 : *lenp, NULL));
++     if (utf8_str != NULL)
++     {
++ 	*lenp = utf16_to_utf8(str, *lenp, utf8_str);
++ 
++ 	/* We might be called before we have p_enc set up. */
++ 	conv.vc_type = CONV_NONE;
++ 	convert_setup(&conv, (char_u *)"utf-8",
++ 					    p_enc? p_enc: (char_u *)"latin1");
++ 	if (conv.vc_type == CONV_NONE)
++ 	{
++ 	    /* p_enc is utf-8, so we're done. */
++ 	    enc_str = utf8_str;
++ 	}
++ 	else
++ 	{
++ 	    enc_str = string_convert(&conv, utf8_str, lenp);
++ 	    vim_free(utf8_str);
++ 	}
++ 
++ 	convert_setup(&conv, NULL, NULL);
++     }
++ 
++     return enc_str;
++ }
++ #endif /* FEAT_MBYTE */
++ 
++ #if (defined(FEAT_MBYTE) && defined(WIN3264)) || defined(PROTO)
++ /*
++  * Convert from the active codepage to 'encoding'.
++  * Input is "str[str_size]".
++  * The result is in allocated memory: "out[outlen]".  With terminating NUL.
++  */
++     void
++ acp_to_enc(str, str_size, out, outlen)
++     char_u	*str;
++     int		str_size;
++     char_u	**out;
++     int		*outlen;
++ 
++ {
++     LPWSTR	widestr;
++ 
++     MultiByteToWideChar_alloc(GetACP(), 0, str, str_size, &widestr, outlen);
++     if (widestr != NULL)
++     {
++ 	++*outlen;	/* Include the 0 after the string */
++ 	*out = utf16_to_enc((short_u *)widestr, outlen);
++ 	vim_free(widestr);
++     }
++ }
++ #endif
++ 
+  
+  /*
+   * Debugging helper: expose the MCH_WRITE_DUMP stuff to other modules
+*** ../vim-7.3.222/src/version.c	2011-06-19 01:27:29.000000000 +0200
+--- src/version.c	2011-06-19 01:28:41.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     223,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+191. You rate eating establishments not by the quality of the food,
+     but by the availability of electrical outlets for your PowerBook.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.224 b/source/ap/vim/patches/7.3.224
new file mode 100644
index 00000000..1673f476
--- /dev/null
+++ b/source/ap/vim/patches/7.3.224
@@ -0,0 +1,162 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.224
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.224
+Problem:    Can't pass dict to sort function.
+Solution:   Add the optional {dict} argument to sort(). (ZyX)
+Files:      runtime/doc/eval.txt, src/eval.c
+
+
+*** ../mercurial/vim73/runtime/doc/eval.txt	2011-05-19 17:25:36.000000000 +0200
+--- runtime/doc/eval.txt	2011-06-19 02:42:52.000000000 +0200
+***************
+*** 1919,1925 ****
+  simplify( {filename})		String	simplify filename as much as possible
+  sin( {expr})			Float	sine of {expr}
+  sinh( {expr})			Float	hyperbolic sine of {expr}
+! sort( {list} [, {func}])	List	sort {list}, using {func} to compare
+  soundfold( {word})		String	sound-fold {word}
+  spellbadword()			String	badly spelled word at cursor
+  spellsuggest( {word} [, {max} [, {capital}]])
+--- 1922,1929 ----
+  simplify( {filename})		String	simplify filename as much as possible
+  sin( {expr})			Float	sine of {expr}
+  sinh( {expr})			Float	hyperbolic sine of {expr}
+! sort( {list} [, {func} [, {dict}]])
+! 				List	sort {list}, using {func} to compare
+  soundfold( {word})		String	sound-fold {word}
+  spellbadword()			String	badly spelled word at cursor
+  spellsuggest( {word} [, {max} [, {capital}]])
+***************
+*** 5275,5281 ****
+  		{only available when compiled with the |+float| feature}
+  
+  
+! sort({list} [, {func}])					*sort()* *E702*
+  		Sort the items in {list} in-place.  Returns {list}.  If you
+  		want a list to remain unmodified make a copy first: >
+  			:let sortedlist = sort(copy(mylist))
+--- 5279,5285 ----
+  		{only available when compiled with the |+float| feature}
+  
+  
+! sort({list} [, {func} [, {dict}]])			*sort()* *E702*
+  		Sort the items in {list} in-place.  Returns {list}.  If you
+  		want a list to remain unmodified make a copy first: >
+  			:let sortedlist = sort(copy(mylist))
+***************
+*** 5283,5288 ****
+--- 5287,5294 ----
+  		Numbers sort after Strings, |Lists| after Numbers.
+  		For sorting text in the current buffer use |:sort|.
+  		When {func} is given and it is one then case is ignored.
++ 		{dict} is for functions with the "dict" attribute.  It will be
++ 		used to set the local variable "self". |Dictionary-function|
+  		When {func} is a |Funcref| or a function name, this function
+  		is called to compare items.  The function is invoked with two
+  		items as argument and must return zero if they are equal, 1 or
+*** ../mercurial/vim73/src/eval.c	2011-05-19 18:26:34.000000000 +0200
+--- src/eval.c	2011-06-19 02:51:13.000000000 +0200
+***************
+*** 7930,7936 ****
+      {"sin",		1, 1, f_sin},
+      {"sinh",		1, 1, f_sinh},
+  #endif
+!     {"sort",		1, 2, f_sort},
+      {"soundfold",	1, 1, f_soundfold},
+      {"spellbadword",	0, 1, f_spellbadword},
+      {"spellsuggest",	1, 3, f_spellsuggest},
+--- 7930,7936 ----
+      {"sin",		1, 1, f_sin},
+      {"sinh",		1, 1, f_sinh},
+  #endif
+!     {"sort",		1, 3, f_sort},
+      {"soundfold",	1, 1, f_soundfold},
+      {"spellbadword",	0, 1, f_spellbadword},
+      {"spellsuggest",	1, 3, f_spellsuggest},
+***************
+*** 16366,16371 ****
+--- 16366,16372 ----
+  
+  static int	item_compare_ic;
+  static char_u	*item_compare_func;
++ static dict_T	*item_compare_selfdict;
+  static int	item_compare_func_err;
+  #define ITEM_COMPARE_FAIL 999
+  
+***************
+*** 16425,16431 ****
+  
+      rettv.v_type = VAR_UNKNOWN;		/* clear_tv() uses this */
+      res = call_func(item_compare_func, (int)STRLEN(item_compare_func),
+! 				 &rettv, 2, argv, 0L, 0L, &dummy, TRUE, NULL);
+      clear_tv(&argv[0]);
+      clear_tv(&argv[1]);
+  
+--- 16426,16433 ----
+  
+      rettv.v_type = VAR_UNKNOWN;		/* clear_tv() uses this */
+      res = call_func(item_compare_func, (int)STRLEN(item_compare_func),
+! 				 &rettv, 2, argv, 0L, 0L, &dummy, TRUE,
+! 				 item_compare_selfdict);
+      clear_tv(&argv[0]);
+      clear_tv(&argv[1]);
+  
+***************
+*** 16471,16478 ****
+--- 16473,16482 ----
+  
+  	item_compare_ic = FALSE;
+  	item_compare_func = NULL;
++ 	item_compare_selfdict = NULL;
+  	if (argvars[1].v_type != VAR_UNKNOWN)
+  	{
++ 	    /* optional second argument: {func} */
+  	    if (argvars[1].v_type == VAR_FUNC)
+  		item_compare_func = argvars[1].vval.v_string;
+  	    else
+***************
+*** 16487,16492 ****
+--- 16491,16507 ----
+  		else
+  		    item_compare_func = get_tv_string(&argvars[1]);
+  	    }
++ 
++ 	    if (argvars[2].v_type != VAR_UNKNOWN)
++ 	    {
++ 		/* optional third argument: {dict} */
++ 		if (argvars[2].v_type != VAR_DICT)
++ 		{
++ 		    EMSG(_(e_dictreq));
++ 		    return;
++ 		}
++ 		item_compare_selfdict = argvars[2].vval.v_dict;
++ 	    }
+  	}
+  
+  	/* Make an array with each entry pointing to an item in the List. */
+*** ../vim-7.3.223/src/version.c	2011-06-19 01:30:01.000000000 +0200
+--- src/version.c	2011-06-19 02:52:46.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     224,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+193. You ask your girlfriend to drive home so you can sit back with
+     your PDA and download the information to your laptop
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.225 b/source/ap/vim/patches/7.3.225
new file mode 100644
index 00000000..5a32b9a6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.225
diff --git a/source/ap/vim/patches/7.3.226 b/source/ap/vim/patches/7.3.226
new file mode 100644
index 00000000..0002aa77
--- /dev/null
+++ b/source/ap/vim/patches/7.3.226
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.226
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.226
+Problem:    On a 64 bit system "syn sync fromstart" is very slow.  (Bjorn
+            Steinbrink)
+Solution:   Store the state when starting to parse from the first line.
+Files:      src/syntax.c
+
+
+*** ../mercurial/vim73/src/syntax.c	2011-05-25 17:56:23.000000000 +0200
+--- src/syntax.c	2011-06-19 04:47:08.000000000 +0200
+***************
+*** 559,565 ****
+      if (INVALID_STATE(&current_state))
+      {
+  	syn_sync(wp, lnum, last_valid);
+! 	first_stored = current_lnum + syn_block->b_syn_sync_minlines;
+      }
+      else
+  	first_stored = current_lnum;
+--- 559,571 ----
+      if (INVALID_STATE(&current_state))
+      {
+  	syn_sync(wp, lnum, last_valid);
+! 	if (current_lnum == 1)
+! 	    /* First line is always valid, no matter "minlines". */
+! 	    first_stored = 1;
+! 	else
+! 	    /* Need to parse "minlines" lines before state can be considered
+! 	     * valid to store. */
+! 	    first_stored = current_lnum + syn_block->b_syn_sync_minlines;
+      }
+      else
+  	first_stored = current_lnum;
+*** ../vim-7.3.225/src/version.c	2011-06-19 04:31:54.000000000 +0200
+--- src/version.c	2011-06-19 04:49:53.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     226,
+  /**/
+
+-- 
+Press any key to continue, press any other key to quit.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.227 b/source/ap/vim/patches/7.3.227
new file mode 100644
index 00000000..55d5a9c6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.227
@@ -0,0 +1,109 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.227
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.227 (after 7.3.221)
+Problem:    Mac OS doesn't have the linewise clipboard fix.
+Solution:   Also change the Mac OS file. (Bjorn Winckler)
+Files:      src/os_macosx.m
+
+
+*** ../mercurial/vim73/src/os_macosx.m	2011-06-13 02:03:55.000000000 +0200
+--- src/os_macosx.m	2011-06-20 00:23:57.000000000 +0200
+***************
+*** 65,71 ****
+      NSString *bestType = [pb availableTypeFromArray:supportedTypes];
+      if (!bestType) goto releasepool;
+  
+!     int motion_type = MCHAR;
+      NSString *string = nil;
+  
+      if ([bestType isEqual:VimPboardType])
+--- 65,71 ----
+      NSString *bestType = [pb availableTypeFromArray:supportedTypes];
+      if (!bestType) goto releasepool;
+  
+!     int motion_type = MAUTO;
+      NSString *string = nil;
+  
+      if ([bestType isEqual:VimPboardType])
+***************
+*** 89,97 ****
+  
+      if (!string)
+      {
+! 	/* Use NSStringPboardType.  The motion type is set to line-wise if the
+! 	 * string contains at least one EOL character, otherwise it is set to
+! 	 * character-wise (block-wise is never used).
+  	 */
+  	NSMutableString *mstring =
+  		[[pb stringForType:NSStringPboardType] mutableCopy];
+--- 89,95 ----
+  
+      if (!string)
+      {
+! 	/* Use NSStringPboardType.  The motion type is detected automatically.
+  	 */
+  	NSMutableString *mstring =
+  		[[pb stringForType:NSStringPboardType] mutableCopy];
+***************
+*** 108,126 ****
+  					   options:0 range:range];
+  	}
+  
+- 	/* Scan for newline character to decide whether the string should be
+- 	 * pasted line-wise or character-wise.
+- 	 */
+- 	motion_type = MCHAR;
+- 	if (0 < n || NSNotFound != [mstring rangeOfString:@"\n"].location)
+- 	    motion_type = MLINE;
+- 
+  	string = mstring;
+      }
+  
+      if (!(MCHAR == motion_type || MLINE == motion_type || MBLOCK == motion_type
+  	    || MAUTO == motion_type))
+! 	motion_type = MCHAR;
+  
+      char_u *str = (char_u*)[string UTF8String];
+      int len = [string lengthOfBytesUsingEncoding:NSUTF8StringEncoding];
+--- 106,118 ----
+  					   options:0 range:range];
+  	}
+  
+  	string = mstring;
+      }
+  
++     /* Default to MAUTO, uses MCHAR or MLINE depending on trailing NL. */
+      if (!(MCHAR == motion_type || MLINE == motion_type || MBLOCK == motion_type
+  	    || MAUTO == motion_type))
+! 	motion_type = MAUTO;
+  
+      char_u *str = (char_u*)[string UTF8String];
+      int len = [string lengthOfBytesUsingEncoding:NSUTF8StringEncoding];
+*** ../vim-7.3.226/src/version.c	2011-06-19 04:54:17.000000000 +0200
+--- src/version.c	2011-06-20 00:21:53.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     227,
+  /**/
+
+-- 
+Some of the well know MS-Windows errors:
+	EMULTI		Multitasking attempted, system confused
+	EKEYBOARD	Keyboard locked, try getting out of this one!
+	EXPLAIN		Unexplained error, please tell us what happened
+	EFUTURE		Reserved for our future mistakes
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.228 b/source/ap/vim/patches/7.3.228
new file mode 100644
index 00000000..3edede59
--- /dev/null
+++ b/source/ap/vim/patches/7.3.228
@@ -0,0 +1,45 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.228
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.228
+Problem:    "2gj" does not always move to the correct position.
+Solution:   Get length of line after moving to a next line. (James Vega)
+Files:      src/normal.c
+
+
+*** ../mercurial/vim73/src/normal.c	2011-05-10 17:29:28.000000000 +0200
+--- src/normal.c	2011-06-20 00:41:43.000000000 +0200
+***************
+*** 4533,4538 ****
+--- 4533,4539 ----
+  		}
+  		curwin->w_cursor.lnum++;
+  		curwin->w_curswant %= width2;
++ 		linelen = linetabsize(ml_get_curline());
+  	    }
+  	}
+        }
+*** ../vim-7.3.227/src/version.c	2011-06-20 00:25:37.000000000 +0200
+--- src/version.c	2011-06-20 00:45:15.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     228,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+197. Your desk collapses under the weight of your computer peripherals.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.229 b/source/ap/vim/patches/7.3.229
new file mode 100644
index 00000000..b133f7a4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.229
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.229
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.229
+Problem:    Using fork() makes gvim crash on Mac when build with
+            CoreFoundation.
+Solution:   Disallow fork() when __APPLE__ is defined. (Hisashi T Fujinaka)
+Files:      src/gui.c
+
+
+*** ../mercurial/vim73/src/gui.c	2011-05-10 16:41:13.000000000 +0200
+--- src/gui.c	2011-06-20 00:51:21.000000000 +0200
+***************
+*** 59,65 ****
+  gui_start()
+  {
+      char_u	*old_term;
+! #if defined(UNIX) && !defined(__BEOS__) && !defined(MACOS_X)
+  # define MAY_FORK
+      int		dofork = TRUE;
+  #endif
+--- 59,66 ----
+  gui_start()
+  {
+      char_u	*old_term;
+! #if defined(UNIX) && !defined(__BEOS__) && !defined(MACOS_X) \
+! 	&& !defined(__APPLE__)
+  # define MAY_FORK
+      int		dofork = TRUE;
+  #endif
+*** ../vim-7.3.228/src/version.c	2011-06-20 00:45:55.000000000 +0200
+--- src/version.c	2011-06-20 00:50:42.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     229,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+198. You read all the quotes at Netaholics Anonymous and keep thinking
+     "What's wrong with that?"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.230 b/source/ap/vim/patches/7.3.230
new file mode 100644
index 00000000..80fcdf13
--- /dev/null
+++ b/source/ap/vim/patches/7.3.230
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.230
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.230
+Problem:    ":wundo" and ":rundo" don't unescape their argument.  (Aaron
+            Thoma)
+Solution:   Use FILE1 instead of XFILE.
+Files:      src/ex_cmds.h
+
+
+*** ../mercurial/vim73/src/ex_cmds.h	2010-08-20 11:09:02.000000000 +0200
+--- src/ex_cmds.h	2011-06-20 04:44:13.000000000 +0200
+***************
+*** 788,794 ****
+  EX(CMD_rubyfile,	"rubyfile",	ex_rubyfile,
+  			RANGE|FILE1|NEEDARG|CMDWIN),
+  EX(CMD_rundo,		"rundo",	ex_rundo,
+! 			NEEDARG|EXTRA|XFILE),
+  EX(CMD_rviminfo,	"rviminfo",	ex_viminfo,
+  			BANG|FILE1|TRLBAR|CMDWIN),
+  EX(CMD_substitute,	"substitute",	do_sub,
+--- 788,794 ----
+  EX(CMD_rubyfile,	"rubyfile",	ex_rubyfile,
+  			RANGE|FILE1|NEEDARG|CMDWIN),
+  EX(CMD_rundo,		"rundo",	ex_rundo,
+! 			NEEDARG|FILE1),
+  EX(CMD_rviminfo,	"rviminfo",	ex_viminfo,
+  			BANG|FILE1|TRLBAR|CMDWIN),
+  EX(CMD_substitute,	"substitute",	do_sub,
+***************
+*** 1078,1084 ****
+  EX(CMD_wsverb,		"wsverb",	ex_wsverb,
+  			EXTRA|NOTADR|NEEDARG),
+  EX(CMD_wundo,		"wundo",	ex_wundo,
+! 			BANG|NEEDARG|EXTRA|XFILE),
+  EX(CMD_wviminfo,	"wviminfo",	ex_viminfo,
+  			BANG|FILE1|TRLBAR|CMDWIN),
+  EX(CMD_xit,		"xit",		ex_exit,
+--- 1078,1084 ----
+  EX(CMD_wsverb,		"wsverb",	ex_wsverb,
+  			EXTRA|NOTADR|NEEDARG),
+  EX(CMD_wundo,		"wundo",	ex_wundo,
+! 			BANG|NEEDARG|FILE1),
+  EX(CMD_wviminfo,	"wviminfo",	ex_viminfo,
+  			BANG|FILE1|TRLBAR|CMDWIN),
+  EX(CMD_xit,		"xit",		ex_exit,
+*** ../vim-7.3.229/src/version.c	2011-06-20 00:53:10.000000000 +0200
+--- src/version.c	2011-06-20 05:02:40.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     230,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+201. When somebody asks you where you are, you tell them in which chat room.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.231 b/source/ap/vim/patches/7.3.231
new file mode 100644
index 00000000..266d0a2b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.231
@@ -0,0 +1,128 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.231
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Note: this is a weird patch, it redoes patches from 7.3.202 and 7.3.203
+that failed when applied as a patch, but the mercurial repository
+already had this, thus won't change anything there.
+
+
+Patch 7.3.231
+Problem:    Runtime file patches failed.
+Solution:   Redo the patches made against the patched files instead of the
+            files in the mercurial repository.
+Files:      runtime/doc/indent.txt, runtime/doc/os_win32.txt
+
+
+*** ../vim-7.3.230/runtime/doc/indent.txt	2011-05-25 15:16:06.000000000 +0200
+--- runtime/doc/indent.txt	2011-05-31 22:23:39.000000000 +0200
+***************
+*** 356,363 ****
+  		      BaseClass(3)	    BaseClass(3)
+  		  {}			    {}
+  <
+! 	+N    Indent a continuation line (a line that spills onto the next) N
+! 	      additional characters.  (default 'shiftwidth').
+  
+  		cino=			  cino=+10 >
+  		  a = b + 9 *		    a = b + 9 *
+--- 357,368 ----
+  		      BaseClass(3)	    BaseClass(3)
+  		  {}			    {}
+  <
+! 							*cino-+*
+! 	+N    Indent a continuation line (a line that spills onto the next)
+!               inside a function N additional characters.  (default
+!               'shiftwidth').
+!               Outside of a function, when the previous line ended in a
+!               backslash, the 2 * N is used.
+  
+  		cino=			  cino=+10 >
+  		  a = b + 9 *		    a = b + 9 *
+***************
+*** 509,522 ****
+--- 514,532 ----
+  		    }
+  		}
+  <
++ 								*cino-)*
+  	)N    Vim searches for unclosed parentheses at most N lines away.
+  	      This limits the time needed to search for parentheses.  (default
+  	      20 lines).
+  
++ 								*cino-star*
+  	*N    Vim searches for unclosed comments at most N lines away.  This
+  	      limits the time needed to search for the start of a comment.
++ 	      If your /* */ comments stop indenting afer N lines this is the
++ 	      value you will want to change.
+  	      (default 70 lines).
+  
++ 								*cino-#*
+  	#N    When N is non-zero recognize shell/Perl comments, starting with
+  	      '#'.  Default N is zero: don't recognizes '#' comments.  Note
+  	      that lines starting with # will still be seen as preprocessor
+*** ../vim-7.3.230/runtime/doc/os_win32.txt	2010-08-15 21:57:16.000000000 +0200
+--- runtime/doc/os_win32.txt	2011-05-28 18:17:58.000000000 +0200
+***************
+*** 313,318 ****
+--- 313,349 ----
+     with :!start do not get passed Vim's open file handles, which means they do
+     not have to be closed before Vim.
+     To avoid this special treatment, use ":! start".
++    There are two optional arguments (see the next Q):
++        /min  the window will be minimized.
++        /b"   no console window will be opened
++    You can only one of these flags at a time.  A second second one will be
++    treated as the start of the command.
++ 
++ Q. How do I avoid getting a window for programs that I run asynchronously?
++ A. You have two possible solutions depending on what exactly do you want:
++    1) You may use the /min flag in order to run program in a minimized state
++       with no other changes. It will work equally for console and GUI
++       applications.
++    2) You can use the /b flag to run console applications without creating a
++       console window for them (GUI applications are not affected). But you
++       should use this flag only if the application you run doesn't require any
++       input.  Otherwise it will get an EOF error because its input stream
++       (stdin) would be redirected to \\.\NUL (stdoud and stderr too).
++ 
++    Example for a console application, run Exuberant ctags: >
++         :!start /min ctags -R .
++ <  When it has finished you should see file named "tags" in your current
++    directory.  You should notice the window title blinking on your taskbar.
++    This is more noticable for commands that take longer.
++    Now delete the "tags" file and run this command: >
++         :!start /b ctags -R .
++ <  You should have the same "tags" file, but this time there will be no
++    blinking on the taskbar.
++    Example for a GUI application: >
++         :!start /min notepad
++         :!start /b notepad
++ <  The first command runs notepad minimized and the second one runs it
++    normally.
+  
+  Q. I'm using Win32s, and when I try to run an external command like "make",
+     Vim doesn't wait for it to finish!  Help!
+*** ../vim-7.3.230/src/version.c	2011-06-20 05:02:53.000000000 +0200
+--- src/version.c	2011-06-26 03:14:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     231,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+222. You send more than 20 personal e-mails a day.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.232 b/source/ap/vim/patches/7.3.232
new file mode 100644
index 00000000..982d7478
--- /dev/null
+++ b/source/ap/vim/patches/7.3.232
@@ -0,0 +1,84 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.232
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.232
+Problem:    Python doesn't compile without +multi_byte
+Solution:   Use "latin1" when MULTI_BYTE is not defined.
+Files:      src/if_py_both.h
+
+
+*** ../vim-7.3.231/src/if_py_both.h	2011-06-19 00:27:46.000000000 +0200
+--- src/if_py_both.h	2011-06-26 03:58:07.000000000 +0200
+***************
+*** 12,17 ****
+--- 12,23 ----
+   * Common code for if_python.c and if_python3.c.
+   */
+  
++ #ifdef FEAT_MBYTE
++ # define ENC_OPT p_enc
++ #else
++ # define ENC_OPT "latin1"
++ #endif
++ 
+  /*
+   * obtain a lock on the Vim data structures
+   */
+***************
+*** 68,74 ****
+      char *str = NULL;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "es#", p_enc, &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+--- 74,80 ----
+      char *str = NULL;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "es#", ENC_OPT, &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+***************
+*** 108,114 ****
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "es#", p_enc, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+--- 114,120 ----
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "es#", ENC_OPT, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+*** ../vim-7.3.231/src/version.c	2011-06-26 03:16:58.000000000 +0200
+--- src/version.c	2011-06-26 04:00:40.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     232,
+  /**/
+
+-- 
+If evolution theories are correct, humans will soon grow a third
+hand for operating the mouse.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.233 b/source/ap/vim/patches/7.3.233
new file mode 100644
index 00000000..2dcbf89a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.233
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.233
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.233
+Problem:    ":scriptnames" and ":breaklist" show long file names.
+Solution:   Shorten to use "~/" when possible. (Jean-Rene David)
+Files:      src/ex_cmds2.c 
+
+
+*** ../vim-7.3.232/src/ex_cmds2.c	2011-05-19 18:26:34.000000000 +0200
+--- src/ex_cmds2.c	2011-06-26 04:20:24.000000000 +0200
+***************
+*** 682,691 ****
+  	for (i = 0; i < dbg_breakp.ga_len; ++i)
+  	{
+  	    bp = &BREAKP(i);
+  	    smsg((char_u *)_("%3d  %s %s  line %ld"),
+  		    bp->dbg_nr,
+  		    bp->dbg_type == DBG_FUNC ? "func" : "file",
+! 		    bp->dbg_name,
+  		    (long)bp->dbg_lnum);
+  	}
+  }
+--- 682,693 ----
+  	for (i = 0; i < dbg_breakp.ga_len; ++i)
+  	{
+  	    bp = &BREAKP(i);
++ 	    if (bp->dbg_type == DBG_FILE)
++ 		home_replace(NULL, bp->dbg_name, NameBuff, MAXPATHL, TRUE);
+  	    smsg((char_u *)_("%3d  %s %s  line %ld"),
+  		    bp->dbg_nr,
+  		    bp->dbg_type == DBG_FUNC ? "func" : "file",
+! 		    bp->dbg_type == DBG_FUNC ? bp->dbg_name : NameBuff,
+  		    (long)bp->dbg_lnum);
+  	}
+  }
+***************
+*** 3268,3274 ****
+  
+      for (i = 1; i <= script_items.ga_len && !got_int; ++i)
+  	if (SCRIPT_ITEM(i).sn_name != NULL)
+! 	    smsg((char_u *)"%3d: %s", i, SCRIPT_ITEM(i).sn_name);
+  }
+  
+  # if defined(BACKSLASH_IN_FILENAME) || defined(PROTO)
+--- 3270,3280 ----
+  
+      for (i = 1; i <= script_items.ga_len && !got_int; ++i)
+  	if (SCRIPT_ITEM(i).sn_name != NULL)
+! 	{
+! 	    home_replace(NULL, SCRIPT_ITEM(i).sn_name,
+! 						    NameBuff, MAXPATHL, TRUE);
+! 	    smsg((char_u *)"%3d: %s", i, NameBuff);
+!         }
+  }
+  
+  # if defined(BACKSLASH_IN_FILENAME) || defined(PROTO)
+*** ../vim-7.3.232/src/version.c	2011-06-26 04:01:37.000000000 +0200
+--- src/version.c	2011-06-26 04:23:48.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     233,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+223. You set up a web-cam as your home's security system.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.234 b/source/ap/vim/patches/7.3.234
new file mode 100644
index 00000000..a60df3db
--- /dev/null
+++ b/source/ap/vim/patches/7.3.234
@@ -0,0 +1,178 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.234
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.234
+Problem:    With GTK menu may be popping down.
+Solution:   Use event time instead of GDK_CURRENT_TIME. (Hong Xu)
+Files:      src/gui.c, src/gui.h, src/gui_gtk.c, src/gui_gtk_x11.c
+
+
+*** ../vim-7.3.233/src/gui.c	2011-06-20 00:53:10.000000000 +0200
+--- src/gui.c	2011-06-26 04:38:09.000000000 +0200
+***************
+*** 84,89 ****
+--- 84,93 ----
+      gui.starting = TRUE;
+      full_screen = FALSE;
+  
++ #ifdef FEAT_GUI_GTK
++     gui.event_time = GDK_CURRENT_TIME;
++ #endif
++ 
+  #ifdef MAY_FORK
+      if (!gui.dofork || vim_strchr(p_go, GO_FORG) || recursive)
+  	dofork = FALSE;
+*** ../vim-7.3.233/src/gui.h	2011-05-10 16:41:13.000000000 +0200
+--- src/gui.h	2011-06-26 04:41:21.000000000 +0200
+***************
+*** 401,406 ****
+--- 401,408 ----
+      GtkAccelGroup *accel_group;
+      GtkWidget	*filedlg;	    /* file selection dialog */
+      char_u	*browse_fname;	    /* file name from filedlg */
++ 
++     guint32	event_time;
+  #endif	/* FEAT_GUI_GTK */
+  
+  #if defined(FEAT_GUI_TABLINE) \
+*** ../vim-7.3.233/src/gui_gtk.c	2011-01-17 20:08:03.000000000 +0100
+--- src/gui_gtk.c	2011-06-26 04:38:09.000000000 +0200
+***************
+*** 1391,1397 ****
+      gtk_menu_popup(GTK_MENU(menu->submenu_id),
+  		   NULL, NULL,
+  		   (GtkMenuPositionFunc)NULL, NULL,
+! 		   3U, (guint32)GDK_CURRENT_TIME);
+  }
+  
+  /* Ugly global variable to pass "mouse_pos" flag from gui_make_popup() to
+--- 1391,1397 ----
+      gtk_menu_popup(GTK_MENU(menu->submenu_id),
+  		   NULL, NULL,
+  		   (GtkMenuPositionFunc)NULL, NULL,
+! 		   3U, gui.event_time);
+  }
+  
+  /* Ugly global variable to pass "mouse_pos" flag from gui_make_popup() to
+*** ../vim-7.3.233/src/gui_gtk_x11.c	2011-06-19 01:14:22.000000000 +0200
+--- src/gui_gtk_x11.c	2011-06-26 04:39:57.000000000 +0200
+***************
+*** 88,95 ****
+  # include <X11/Sunkeysym.h>
+  #endif
+  
+- static guint32 clipboard_event_time = CurrentTime;
+- 
+  /*
+   * Easy-to-use macro for multihead support.
+   */
+--- 88,93 ----
+***************
+*** 934,940 ****
+      guint	state;
+      char_u	*s, *d;
+  
+!     clipboard_event_time = event->time;
+      key_sym = event->keyval;
+      state = event->state;
+  
+--- 932,938 ----
+      guint	state;
+      char_u	*s, *d;
+  
+!     gui.event_time = event->time;
+      key_sym = event->keyval;
+      state = event->state;
+  
+***************
+*** 1129,1135 ****
+  		  GdkEventKey *event,
+  		  gpointer data UNUSED)
+  {
+!     clipboard_event_time = event->time;
+      /*
+       * GTK+ 2 input methods may do fancy stuff on key release events too.
+       * With the default IM for instance, you can enter any UCS code point
+--- 1127,1133 ----
+  		  GdkEventKey *event,
+  		  gpointer data UNUSED)
+  {
+!     gui.event_time = event->time;
+      /*
+       * GTK+ 2 input methods may do fancy stuff on key release events too.
+       * With the default IM for instance, you can enter any UCS code point
+***************
+*** 1622,1628 ****
+      int x, y;
+      int_u vim_modifiers;
+  
+!     clipboard_event_time = event->time;
+  
+      /* Make sure we have focus now we've been selected */
+      if (gtk_socket_id != 0 && !GTK_WIDGET_HAS_FOCUS(widget))
+--- 1620,1626 ----
+      int x, y;
+      int_u vim_modifiers;
+  
+!     gui.event_time = event->time;
+  
+      /* Make sure we have focus now we've been selected */
+      if (gtk_socket_id != 0 && !GTK_WIDGET_HAS_FOCUS(widget))
+***************
+*** 1733,1739 ****
+      int x, y;
+      int_u vim_modifiers;
+  
+!     clipboard_event_time = event->time;
+  
+      /* Remove any motion "machine gun" timers used for automatic further
+         extension of allocation areas if outside of the applications window
+--- 1731,1737 ----
+      int x, y;
+      int_u vim_modifiers;
+  
+!     gui.event_time = event->time;
+  
+      /* Remove any motion "machine gun" timers used for automatic further
+         extension of allocation areas if outside of the applications window
+***************
+*** 5654,5660 ****
+      int success;
+  
+      success = gtk_selection_owner_set(gui.drawarea, cbd->gtk_sel_atom,
+! 				      clipboard_event_time);
+      gui_mch_update();
+      return (success) ? OK : FAIL;
+  }
+--- 5652,5658 ----
+      int success;
+  
+      success = gtk_selection_owner_set(gui.drawarea, cbd->gtk_sel_atom,
+! 				      gui.event_time);
+      gui_mch_update();
+      return (success) ? OK : FAIL;
+  }
+*** ../vim-7.3.233/src/version.c	2011-06-26 04:25:24.000000000 +0200
+--- src/version.c	2011-06-26 04:47:02.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     234,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+225. You sign up for free subscriptions for all the computer magazines
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.235 b/source/ap/vim/patches/7.3.235
new file mode 100644
index 00000000..a852c852
--- /dev/null
+++ b/source/ap/vim/patches/7.3.235
@@ -0,0 +1,360 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.235
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.235
+Problem:    ";" gets stuck on a "t" command, it's not useful.
+Solution:   Add the ';' flag in 'cpo'. (Christian Brabandt)
+Files:      runtime/doc/motion.txt, runtime/doc/options.txt, src/option.h,
+            src/search.c src/testdir/test81.in, src/testdir/test81.ok,
+            src/testdir/Makefile, src/testdir/Make_amiga.mak,
+            src/testdir/Make_dos.mak, src/testdir/Make_ming.mak,
+            src/testdir/Make_os2.mak, src/testdir/Make_vms.mms
+
+
+*** ../vim-7.3.234/runtime/doc/motion.txt	2010-08-15 21:57:17.000000000 +0200
+--- runtime/doc/motion.txt	2011-06-26 05:15:58.000000000 +0200
+***************
+*** 269,279 ****
+  			{char} can be entered like with the |f| command.
+  
+  							*;*
+! ;			Repeat latest f, t, F or T [count] times.
+  
+  							*,*
+  ,			Repeat latest f, t, F or T in opposite direction
+! 			[count] times.
+  
+  ==============================================================================
+  3. Up-down motions					*up-down-motions*
+--- 269,279 ----
+  			{char} can be entered like with the |f| command.
+  
+  							*;*
+! ;			Repeat latest f, t, F or T [count] times. See |cpo-;|
+  
+  							*,*
+  ,			Repeat latest f, t, F or T in opposite direction
+! 			[count] times. See also |cpo-;|
+  
+  ==============================================================================
+  3. Up-down motions					*up-down-motions*
+*** ../vim-7.3.234/runtime/doc/options.txt	2011-06-12 20:42:17.000000000 +0200
+--- runtime/doc/options.txt	2011-06-26 05:15:58.000000000 +0200
+***************
+*** 2090,2095 ****
+--- 2117,2128 ----
+  								*cpo->*
+  		>	When appending to a register, put a line break before
+  			the appended text.
++ 								*cpo-;*
++ 		;	When using |,| or |;| to repeat the last |t| search
++ 			and the cursor is right in front of the searched
++ 			character, the cursor won't move. When not included,
++ 			the cursor would skip over it and jump to the
++ 			following occurence.
+  
+  	POSIX flags.  These are not included in the Vi default value, except
+  	when $VIM_POSIX was set on startup. |posix|
+*** ../vim-7.3.234/src/option.h	2011-06-12 22:13:37.000000000 +0200
+--- src/option.h	2011-06-26 05:17:58.000000000 +0200
+***************
+*** 169,178 ****
+  #define CPO_SUBPERCENT	'/'	/* % in :s string uses previous one */
+  #define CPO_BACKSL	'\\'	/* \ is not special in [] */
+  #define CPO_CHDIR	'.'	/* don't chdir if buffer is modified */
+  /* default values for Vim, Vi and POSIX */
+  #define CPO_VIM		"aABceFs"
+! #define CPO_VI		"aAbBcCdDeEfFgHiIjJkKlLmMnoOpPqrRsStuvwWxXyZ$!%*-+<>"
+! #define CPO_ALL		"aAbBcCdDeEfFgHiIjJkKlLmMnoOpPqrRsStuvwWxXyZ$!%*-+<>#{|&/\\."
+  
+  /* characters for p_ww option: */
+  #define WW_ALL		"bshl<>[],~"
+--- 169,180 ----
+  #define CPO_SUBPERCENT	'/'	/* % in :s string uses previous one */
+  #define CPO_BACKSL	'\\'	/* \ is not special in [] */
+  #define CPO_CHDIR	'.'	/* don't chdir if buffer is modified */
++ #define CPO_SCOLON	';'	/* using "," and ";" will skip over char if
++ 				 * cursor would not move */
+  /* default values for Vim, Vi and POSIX */
+  #define CPO_VIM		"aABceFs"
+! #define CPO_VI		"aAbBcCdDeEfFgHiIjJkKlLmMnoOpPqrRsStuvwWxXyZ$!%*-+<>;"
+! #define CPO_ALL		"aAbBcCdDeEfFgHiIjJkKlLmMnoOpPqrRsStuvwWxXyZ$!%*-+<>#{|&/\\.;"
+  
+  /* characters for p_ww option: */
+  #define WW_ALL		"bshl<>[],~"
+*** ../vim-7.3.234/src/search.c	2011-05-10 16:41:13.000000000 +0200
+--- src/search.c	2011-06-26 05:20:45.000000000 +0200
+***************
+*** 1546,1551 ****
+--- 1546,1552 ----
+      int			col;
+      char_u		*p;
+      int			len;
++     int			stop = TRUE;
+  #ifdef FEAT_MBYTE
+      static char_u	bytes[MB_MAXBYTES];
+      static int		bytelen = 1;	/* >1 for multi-byte char */
+***************
+*** 1580,1585 ****
+--- 1581,1592 ----
+  	t_cmd = last_t_cmd;
+  	c = lastc;
+  	/* For multi-byte re-use last bytes[] and bytelen. */
++ 
++ 	/* Force a move of at least one char, so ";" and "," will move the
++ 	 * cursor, even if the cursor is right in front of char we are looking
++ 	 * at. */
++ 	if (vim_strchr(p_cpo, CPO_SCOLON) == NULL && count == 1)
++ 	    stop = FALSE;
+      }
+  
+      if (dir == BACKWARD)
+***************
+*** 1612,1625 ****
+  		}
+  		if (bytelen == 1)
+  		{
+! 		    if (p[col] == c)
+  			break;
+  		}
+  		else
+  		{
+! 		    if (vim_memcmp(p + col, bytes, bytelen) == 0)
+  			break;
+  		}
+  	    }
+  	}
+  	else
+--- 1619,1633 ----
+  		}
+  		if (bytelen == 1)
+  		{
+! 		    if (p[col] == c && stop)
+  			break;
+  		}
+  		else
+  		{
+! 		    if (vim_memcmp(p + col, bytes, bytelen) == 0 && stop)
+  			break;
+  		}
++ 		stop = TRUE;
+  	    }
+  	}
+  	else
+***************
+*** 1629,1636 ****
+  	    {
+  		if ((col += dir) < 0 || col >= len)
+  		    return FAIL;
+! 		if (p[col] == c)
+  		    break;
+  	    }
+  	}
+      }
+--- 1637,1645 ----
+  	    {
+  		if ((col += dir) < 0 || col >= len)
+  		    return FAIL;
+! 		if (p[col] == c && stop)
+  		    break;
++ 		stop = TRUE;
+  	    }
+  	}
+      }
+*** ../vim-7.3.234/src/testdir/test81.in	2011-06-26 05:34:33.000000000 +0200
+--- src/testdir/test81.in	2011-06-26 05:30:31.000000000 +0200
+***************
+*** 0 ****
+--- 1,18 ----
++ Test for t movement command and 'cpo-;' setting
++ 
++ STARTTEST
++ :set nocompatible
++ :set cpo-=;
++ /firstline/
++ j0tt;D
++ $Ty;D:set cpo+=;
++ j0tt;;D
++ $Ty;;D:?firstline?+1,$w! test.out
++ :qa!
++ ENDTEST
++ 
++ firstline
++ aaa two three four
++ bbb yee yoo four
++ ccc two three four
++ ddd yee yoo four
+*** ../vim-7.3.234/src/testdir/test81.ok	2011-06-26 05:34:33.000000000 +0200
+--- src/testdir/test81.ok	2011-06-26 05:31:33.000000000 +0200
+***************
+*** 0 ****
+--- 1,4 ----
++ aaa two
++ bbb y
++ ccc
++ ddd yee y
+*** ../vim-7.3.234/src/testdir/Makefile	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Makefile	2011-06-26 05:09:56.000000000 +0200
+***************
+*** 26,32 ****
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 26,32 ----
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS_GUI = test16.out
+  
+*** ../vim-7.3.234/src/testdir/Make_amiga.mak	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Make_amiga.mak	2011-06-26 05:09:07.000000000 +0200
+***************
+*** 28,34 ****
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out test79.out test80.out
+  
+  .SUFFIXES: .in .out
+  
+--- 28,35 ----
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out
+  
+  .SUFFIXES: .in .out
+  
+***************
+*** 128,130 ****
+--- 129,132 ----
+  test78.out: test78.in
+  test79.out: test79.in
+  test80.out: test80.in
++ test81.out: test81.in
+*** ../vim-7.3.234/src/testdir/Make_dos.mak	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Make_dos.mak	2011-06-26 05:09:16.000000000 +0200
+***************
+*** 29,35 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 29,35 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.234/src/testdir/Make_ming.mak	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Make_ming.mak	2011-06-26 05:09:24.000000000 +0200
+***************
+*** 49,55 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 49,55 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.234/src/testdir/Make_os2.mak	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Make_os2.mak	2011-06-26 05:09:33.000000000 +0200
+***************
+*** 28,34 ****
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out test79.out test80.out
+  
+  .SUFFIXES: .in .out
+  
+--- 28,35 ----
+  		test61.out test62.out test63.out test64.out test65.out \
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+! 		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out
+  
+  .SUFFIXES: .in .out
+  
+*** ../vim-7.3.234/src/testdir/Make_vms.mms	2011-06-19 04:31:54.000000000 +0200
+--- src/testdir/Make_vms.mms	2011-06-26 05:09:42.000000000 +0200
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jun 19
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jun 26
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 75,81 ****
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out test78.out test79.out test80.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 75,81 ----
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out test78.out test79.out test80.out test81.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.234/src/version.c	2011-06-26 04:48:56.000000000 +0200
+--- src/version.c	2011-06-26 05:33:53.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     235,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+226. You sit down at the computer right after dinner and your spouse
+     says "See you in the morning."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.236 b/source/ap/vim/patches/7.3.236
new file mode 100644
index 00000000..3be69e30
--- /dev/null
+++ b/source/ap/vim/patches/7.3.236
@@ -0,0 +1,87 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.236
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.236 (after 7.3.232)
+Problem:    Python 3 doesn't compile without +multi_byte 
+Solution:   Use "latin1" when MULTI_BYTE is not defined. (lilydjwg)
+Files:      src/if_python3.c
+
+
+*** ../vim-7.3.235/src/if_python3.c	2011-06-19 00:27:46.000000000 +0200
+--- src/if_python3.c	2011-06-26 19:10:57.000000000 +0200
+***************
+*** 70,76 ****
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)p_enc, NULL);
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+--- 70,76 ----
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, NULL);
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+***************
+*** 661,667 ****
+  
+      /* PyRun_SimpleString expects a UTF-8 string. Wrong encoding may cause
+       * SyntaxError (unicode error). */
+!     cmdstr = PyUnicode_Decode(cmd, strlen(cmd), (char *)p_enc, NULL);
+      cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", NULL);
+      Py_XDECREF(cmdstr);
+      PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+--- 661,667 ----
+  
+      /* PyRun_SimpleString expects a UTF-8 string. Wrong encoding may cause
+       * SyntaxError (unicode error). */
+!     cmdstr = PyUnicode_Decode(cmd, strlen(cmd), (char *)ENC_OPT, NULL);
+      cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", NULL);
+      Py_XDECREF(cmdstr);
+      PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+***************
+*** 1463,1469 ****
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_Decode(tmp, len, (char *)p_enc, NULL);
+  
+      vim_free(tmp);
+      return result;
+--- 1463,1469 ----
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_Decode(tmp, len, (char *)ENC_OPT, NULL);
+  
+      vim_free(tmp);
+      return result;
+*** ../vim-7.3.235/src/version.c	2011-06-26 05:36:07.000000000 +0200
+--- src/version.c	2011-06-26 19:12:12.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     236,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+228. You spend Saturday night making the counter on your home page
+     pass that 2000 mark.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.237 b/source/ap/vim/patches/7.3.237
new file mode 100644
index 00000000..ead50ca6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.237
@@ -0,0 +1,222 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.237
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.237
+Problem:    "filetype" completion doesn't work on Windows. (Yue Wu)
+Solution:   Don't use a glob pattern for the directories, use a list of
+            directories. (Dominique Pelle)
+Files:      src/ex_getln.c
+     
+
+*** ../vim-7.3.236/src/ex_getln.c	2011-05-19 18:26:34.000000000 +0200
+--- src/ex_getln.c	2011-06-26 19:36:36.000000000 +0200
+***************
+*** 110,116 ****
+  static int	expand_showtail __ARGS((expand_T *xp));
+  #ifdef FEAT_CMDL_COMPL
+  static int	expand_shellcmd __ARGS((char_u *filepat, int *num_file, char_u ***file, int flagsarg));
+! static int	ExpandRTDir __ARGS((char_u *pat, int *num_file, char_u ***file, char *dirname));
+  # if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL)
+  static int	ExpandUserDefined __ARGS((expand_T *xp, regmatch_T *regmatch, int *num_file, char_u ***file));
+  static int	ExpandUserList __ARGS((expand_T *xp, int *num_file, char_u ***file));
+--- 110,116 ----
+  static int	expand_showtail __ARGS((expand_T *xp));
+  #ifdef FEAT_CMDL_COMPL
+  static int	expand_shellcmd __ARGS((char_u *filepat, int *num_file, char_u ***file, int flagsarg));
+! static int	ExpandRTDir __ARGS((char_u *pat, int *num_file, char_u ***file, char *dirname[]));
+  # if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL)
+  static int	ExpandUserDefined __ARGS((expand_T *xp, regmatch_T *regmatch, int *num_file, char_u ***file));
+  static int	ExpandUserList __ARGS((expand_T *xp, int *num_file, char_u ***file));
+***************
+*** 4536,4548 ****
+  	    || xp->xp_context == EXPAND_TAGS_LISTFILES)
+  	return expand_tags(xp->xp_context == EXPAND_TAGS, pat, num_file, file);
+      if (xp->xp_context == EXPAND_COLORS)
+! 	return ExpandRTDir(pat, num_file, file, "colors");
+      if (xp->xp_context == EXPAND_COMPILER)
+! 	return ExpandRTDir(pat, num_file, file, "compiler");
+      if (xp->xp_context == EXPAND_OWNSYNTAX)
+! 	return ExpandRTDir(pat, num_file, file, "syntax");
+      if (xp->xp_context == EXPAND_FILETYPE)
+! 	return ExpandRTDir(pat, num_file, file, "{syntax,indent,ftplugin}");
+  # if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL)
+      if (xp->xp_context == EXPAND_USER_LIST)
+  	return ExpandUserList(xp, num_file, file);
+--- 4536,4560 ----
+  	    || xp->xp_context == EXPAND_TAGS_LISTFILES)
+  	return expand_tags(xp->xp_context == EXPAND_TAGS, pat, num_file, file);
+      if (xp->xp_context == EXPAND_COLORS)
+!     {
+! 	char *directories[] = {"colors", NULL};
+! 	return ExpandRTDir(pat, num_file, file, directories);
+!     }
+      if (xp->xp_context == EXPAND_COMPILER)
+!     {
+! 	char *directories[] = {"colors", NULL};
+! 	return ExpandRTDir(pat, num_file, file, directories);
+!     }
+      if (xp->xp_context == EXPAND_OWNSYNTAX)
+!     {
+! 	char *directories[] = {"syntax", NULL};
+! 	return ExpandRTDir(pat, num_file, file, directories);
+!     }
+      if (xp->xp_context == EXPAND_FILETYPE)
+!     {
+! 	char *directories[] = {"syntax", "indent", "ftplugin", NULL};
+! 	return ExpandRTDir(pat, num_file, file, directories);
+!     }
+  # if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL)
+      if (xp->xp_context == EXPAND_USER_LIST)
+  	return ExpandUserList(xp, num_file, file);
+***************
+*** 4995,5051 ****
+  /*
+   * Expand color scheme, compiler or filetype names:
+   * 'runtimepath'/{dirnames}/{pat}.vim
+!  * dirnames may contain one directory (ex: "colorscheme") or can be a glob
+!  * expression matching multiple directories (ex: "{syntax,ftplugin,indent}").
+   */
+      static int
+  ExpandRTDir(pat, num_file, file, dirnames)
+      char_u	*pat;
+      int		*num_file;
+      char_u	***file;
+!     char	*dirnames;
+  {
+!     char_u	*all;
+      char_u	*s;
+      char_u	*e;
+      garray_T	ga;
+  
+      *num_file = 0;
+      *file = NULL;
+!     s = alloc((unsigned)(STRLEN(pat) + STRLEN(dirnames) + 7));
+!     if (s == NULL)
+! 	return FAIL;
+!     sprintf((char *)s, "%s/%s*.vim", dirnames, pat);
+!     all = globpath(p_rtp, s, 0);
+!     vim_free(s);
+!     if (all == NULL)
+! 	return FAIL;
+  
+!     ga_init2(&ga, (int)sizeof(char *), 3);
+!     for (s = all; *s != NUL; s = e)
+      {
+! 	e = vim_strchr(s, '\n');
+! 	if (e == NULL)
+! 	    e = s + STRLEN(s);
+! 	if (ga_grow(&ga, 1) == FAIL)
+! 	    break;
+! 	if (e - 4 > s && STRNICMP(e - 4, ".vim", 4) == 0)
+  	{
+! 	    for (s = e - 4; s > all; mb_ptr_back(all, s))
+! 		if (*s == '\n' || vim_ispathsep(*s))
+! 		    break;
+! 	    ++s;
+! 	    ((char_u **)ga.ga_data)[ga.ga_len] =
+  					    vim_strnsave(s, (int)(e - s - 4));
+! 	    ++ga.ga_len;
+  	}
+! 	if (*e != NUL)
+! 	    ++e;
+      }
+!     vim_free(all);
+  
+      /* Sort and remove duplicates which can happen when specifying multiple
+!      * directories in dirnames such as "{syntax,ftplugin,indent}". */
+      remove_duplicates(&ga);
+  
+      *file = ga.ga_data;
+--- 5007,5074 ----
+  /*
+   * Expand color scheme, compiler or filetype names:
+   * 'runtimepath'/{dirnames}/{pat}.vim
+!  * "dirnames" is an array with one or more directory names.
+   */
+      static int
+  ExpandRTDir(pat, num_file, file, dirnames)
+      char_u	*pat;
+      int		*num_file;
+      char_u	***file;
+!     char	*dirnames[];
+  {
+!     char_u	*matches;
+      char_u	*s;
+      char_u	*e;
+      garray_T	ga;
++     int		i;
++     int		pat_len;
+  
+      *num_file = 0;
+      *file = NULL;
+!     pat_len = STRLEN(pat);
+!     ga_init2(&ga, (int)sizeof(char *), 10);
+  
+!     for (i = 0; dirnames[i] != NULL; ++i)
+      {
+! 	s = alloc((unsigned)(STRLEN(dirnames[i]) + pat_len + 7));
+! 	if (s == NULL)
+  	{
+! 	    ga_clear_strings(&ga);
+! 	    return FAIL;
+! 	}
+! 	sprintf((char *)s, "%s/%s*.vim", dirnames[i], pat);
+! 	matches = globpath(p_rtp, s, 0);
+! 	vim_free(s);
+! 	if (matches == NULL)
+! 	    continue;
+! 
+! 	for (s = matches; *s != NUL; s = e)
+! 	{
+! 	    e = vim_strchr(s, '\n');
+! 	    if (e == NULL)
+! 		e = s + STRLEN(s);
+! 	    if (ga_grow(&ga, 1) == FAIL)
+! 		break;
+! 	    if (e - 4 > s && STRNICMP(e - 4, ".vim", 4) == 0)
+! 	    {
+! 		for (s = e - 4; s > matches; mb_ptr_back(matches, s))
+! 		    if (*s == '\n' || vim_ispathsep(*s))
+! 			break;
+! 		++s;
+! 		((char_u **)ga.ga_data)[ga.ga_len] =
+  					    vim_strnsave(s, (int)(e - s - 4));
+! 		++ga.ga_len;
+! 	    }
+! 	    if (*e != NUL)
+! 		++e;
+  	}
+! 	vim_free(matches);
+      }
+!     if (ga.ga_len == 0)
+!         return FAIL;
+  
+      /* Sort and remove duplicates which can happen when specifying multiple
+!      * directories in dirnames. */
+      remove_duplicates(&ga);
+  
+      *file = ga.ga_data;
+*** ../vim-7.3.236/src/version.c	2011-06-26 19:13:33.000000000 +0200
+--- src/version.c	2011-06-26 19:39:39.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     237,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+230. You spend your Friday nights typing away at your keyboard
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.238 b/source/ap/vim/patches/7.3.238
new file mode 100644
index 00000000..289b1a43
--- /dev/null
+++ b/source/ap/vim/patches/7.3.238
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.238
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.238
+Problem:    Compiler warning for conversion.
+Solution:   Add type cast. (Mike Williams)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.237/src/ex_getln.c	2011-06-26 19:40:14.000000000 +0200
+--- src/ex_getln.c	2011-07-04 14:23:27.000000000 +0200
+***************
+*** 5025,5031 ****
+  
+      *num_file = 0;
+      *file = NULL;
+!     pat_len = STRLEN(pat);
+      ga_init2(&ga, (int)sizeof(char *), 10);
+  
+      for (i = 0; dirnames[i] != NULL; ++i)
+--- 5025,5031 ----
+  
+      *num_file = 0;
+      *file = NULL;
+!     pat_len = (int)STRLEN(pat);
+      ga_init2(&ga, (int)sizeof(char *), 10);
+  
+      for (i = 0; dirnames[i] != NULL; ++i)
+*** ../vim-7.3.237/src/version.c	2011-06-26 19:40:14.000000000 +0200
+--- src/version.c	2011-07-07 15:04:00.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     238,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+255. You work for a newspaper and your editor asks you to write an
+     article about Internet addiction...in the "first person."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.239 b/source/ap/vim/patches/7.3.239
new file mode 100644
index 00000000..1c03da3f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.239
@@ -0,0 +1,321 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.239
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.239
+Problem:    Python corrects the cursor column without taking 'virtualedit'
+	    into account. (lilydjwg)
+Solution:   Call check_cursor_col_win().
+Files:	    src/if_py_both.h, src/mbyte.c, src/misc2.c, src/normal.c,
+	    src/proto/mbyte.pro, src/proto/misc2.pro
+
+
+*** ../vim-7.3.238/src/if_py_both.h	2011-06-26 04:01:37.000000000 +0200
+--- src/if_py_both.h	2011-07-07 14:28:19.000000000 +0200
+***************
+*** 534,540 ****
+      {
+  	long lnum;
+  	long col;
+- 	long len;
+  
+  	if (!PyArg_Parse(val, "(ll)", &lnum, &col))
+  	    return -1;
+--- 534,539 ----
+***************
+*** 549,566 ****
+  	if (VimErrorCheck())
+  	    return -1;
+  
+- 	/* When column is out of range silently correct it. */
+- 	len = (long)STRLEN(ml_get_buf(this->win->w_buffer, lnum, FALSE));
+- 	if (col > len)
+- 	    col = len;
+- 
+  	this->win->w_cursor.lnum = lnum;
+  	this->win->w_cursor.col = col;
+  #ifdef FEAT_VIRTUALEDIT
+  	this->win->w_cursor.coladd = 0;
+  #endif
+! 	update_screen(VALID);
+  
+  	return 0;
+      }
+      else if (strcmp(name, "height") == 0)
+--- 548,562 ----
+  	if (VimErrorCheck())
+  	    return -1;
+  
+  	this->win->w_cursor.lnum = lnum;
+  	this->win->w_cursor.col = col;
+  #ifdef FEAT_VIRTUALEDIT
+  	this->win->w_cursor.coladd = 0;
+  #endif
+! 	/* When column is out of range silently correct it. */
+! 	check_cursor_col_win(this->win);
+  
++ 	update_screen(VALID);
+  	return 0;
+      }
+      else if (strcmp(name, "height") == 0)
+*** ../vim-7.3.238/src/mbyte.c	2011-04-11 14:29:13.000000000 +0200
+--- src/mbyte.c	2011-07-07 14:27:07.000000000 +0200
+***************
+*** 3563,3569 ****
+      void
+  mb_adjust_cursor()
+  {
+!     mb_adjustpos(&curwin->w_cursor);
+  }
+  
+  /*
+--- 3563,3569 ----
+      void
+  mb_adjust_cursor()
+  {
+!     mb_adjustpos(curbuf, &curwin->w_cursor);
+  }
+  
+  /*
+***************
+*** 3571,3577 ****
+   * If it points to a tail byte it's moved backwards to the head byte.
+   */
+      void
+! mb_adjustpos(lp)
+      pos_T	*lp;
+  {
+      char_u	*p;
+--- 3571,3578 ----
+   * If it points to a tail byte it's moved backwards to the head byte.
+   */
+      void
+! mb_adjustpos(buf, lp)
+!     buf_T	*buf;
+      pos_T	*lp;
+  {
+      char_u	*p;
+***************
+*** 3582,3588 ****
+  #endif
+  	    )
+      {
+! 	p = ml_get(lp->lnum);
+  	lp->col -= (*mb_head_off)(p, p + lp->col);
+  #ifdef FEAT_VIRTUALEDIT
+  	/* Reset "coladd" when the cursor would be on the right half of a
+--- 3583,3589 ----
+  #endif
+  	    )
+      {
+! 	p = ml_get_buf(buf, lp->lnum, FALSE);
+  	lp->col -= (*mb_head_off)(p, p + lp->col);
+  #ifdef FEAT_VIRTUALEDIT
+  	/* Reset "coladd" when the cursor would be on the right half of a
+*** ../vim-7.3.238/src/misc2.c	2011-04-11 16:56:29.000000000 +0200
+--- src/misc2.c	2011-07-07 14:27:50.000000000 +0200
+***************
+*** 333,339 ****
+  #ifdef FEAT_MBYTE
+      /* prevent from moving onto a trail byte */
+      if (has_mbyte)
+! 	mb_adjustpos(pos);
+  #endif
+  
+      if (col < wcol)
+--- 333,339 ----
+  #ifdef FEAT_MBYTE
+      /* prevent from moving onto a trail byte */
+      if (has_mbyte)
+! 	mb_adjustpos(curbuf, pos);
+  #endif
+  
+      if (col < wcol)
+***************
+*** 544,559 ****
+      void
+  check_cursor_col()
+  {
+      colnr_T len;
+  #ifdef FEAT_VIRTUALEDIT
+!     colnr_T oldcol = curwin->w_cursor.col;
+!     colnr_T oldcoladd = curwin->w_cursor.col + curwin->w_cursor.coladd;
+  #endif
+  
+!     len = (colnr_T)STRLEN(ml_get_curline());
+      if (len == 0)
+! 	curwin->w_cursor.col = 0;
+!     else if (curwin->w_cursor.col >= len)
+      {
+  	/* Allow cursor past end-of-line when:
+  	 * - in Insert mode or restarting Insert mode
+--- 544,569 ----
+      void
+  check_cursor_col()
+  {
++     check_cursor_col_win(curwin);
++ }
++ 
++ /*
++  * Make sure win->w_cursor.col is valid.
++  */
++     void
++ check_cursor_col_win(win)
++     win_T *win;
++ {
+      colnr_T len;
+  #ifdef FEAT_VIRTUALEDIT
+!     colnr_T oldcol = win->w_cursor.col;
+!     colnr_T oldcoladd = win->w_cursor.col + win->w_cursor.coladd;
+  #endif
+  
+!     len = (colnr_T)STRLEN(ml_get_buf(win->w_buffer, win->w_cursor.lnum, FALSE));
+      if (len == 0)
+! 	win->w_cursor.col = 0;
+!     else if (win->w_cursor.col >= len)
+      {
+  	/* Allow cursor past end-of-line when:
+  	 * - in Insert mode or restarting Insert mode
+***************
+*** 567,599 ****
+  		|| (ve_flags & VE_ONEMORE)
+  #endif
+  		|| virtual_active())
+! 	    curwin->w_cursor.col = len;
+  	else
+  	{
+! 	    curwin->w_cursor.col = len - 1;
+  #ifdef FEAT_MBYTE
+! 	    /* prevent cursor from moving on the trail byte */
+  	    if (has_mbyte)
+! 		mb_adjust_cursor();
+  #endif
+  	}
+      }
+!     else if (curwin->w_cursor.col < 0)
+! 	curwin->w_cursor.col = 0;
+  
+  #ifdef FEAT_VIRTUALEDIT
+      /* If virtual editing is on, we can leave the cursor on the old position,
+       * only we must set it to virtual.  But don't do it when at the end of the
+       * line. */
+      if (oldcol == MAXCOL)
+! 	curwin->w_cursor.coladd = 0;
+      else if (ve_flags == VE_ALL)
+      {
+! 	if (oldcoladd > curwin->w_cursor.col)
+! 	    curwin->w_cursor.coladd = oldcoladd - curwin->w_cursor.col;
+  	else
+  	    /* avoid weird number when there is a miscalculation or overflow */
+! 	    curwin->w_cursor.coladd = 0;
+      }
+  #endif
+  }
+--- 577,609 ----
+  		|| (ve_flags & VE_ONEMORE)
+  #endif
+  		|| virtual_active())
+! 	    win->w_cursor.col = len;
+  	else
+  	{
+! 	    win->w_cursor.col = len - 1;
+  #ifdef FEAT_MBYTE
+! 	    /* Move the cursor to the head byte. */
+  	    if (has_mbyte)
+! 		mb_adjustpos(win->w_buffer, &win->w_cursor);
+  #endif
+  	}
+      }
+!     else if (win->w_cursor.col < 0)
+! 	win->w_cursor.col = 0;
+  
+  #ifdef FEAT_VIRTUALEDIT
+      /* If virtual editing is on, we can leave the cursor on the old position,
+       * only we must set it to virtual.  But don't do it when at the end of the
+       * line. */
+      if (oldcol == MAXCOL)
+! 	win->w_cursor.coladd = 0;
+      else if (ve_flags == VE_ALL)
+      {
+! 	if (oldcoladd > win->w_cursor.col)
+! 	    win->w_cursor.coladd = oldcoladd - win->w_cursor.col;
+  	else
+  	    /* avoid weird number when there is a miscalculation or overflow */
+! 	    win->w_cursor.coladd = 0;
+      }
+  #endif
+  }
+*** ../vim-7.3.238/src/normal.c	2011-06-20 00:45:55.000000000 +0200
+--- src/normal.c	2011-07-07 14:27:57.000000000 +0200
+***************
+*** 8774,8780 ****
+  	{
+  	    --pp->col;
+  #ifdef FEAT_MBYTE
+! 	    mb_adjustpos(pp);
+  #endif
+  	}
+  	else if (pp->lnum > 1)
+--- 8774,8780 ----
+  	{
+  	    --pp->col;
+  #ifdef FEAT_MBYTE
+! 	    mb_adjustpos(curbuf, pp);
+  #endif
+  	}
+  	else if (pp->lnum > 1)
+*** ../vim-7.3.238/src/proto/mbyte.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/mbyte.pro	2011-07-07 14:27:09.000000000 +0200
+***************
+*** 56,62 ****
+  int utf_valid_string __ARGS((char_u *s, char_u *end));
+  int dbcs_screen_tail_off __ARGS((char_u *base, char_u *p));
+  void mb_adjust_cursor __ARGS((void));
+! void mb_adjustpos __ARGS((pos_T *lp));
+  char_u *mb_prevptr __ARGS((char_u *line, char_u *p));
+  int mb_charlen __ARGS((char_u *str));
+  int mb_charlen_len __ARGS((char_u *str, int len));
+--- 56,62 ----
+  int utf_valid_string __ARGS((char_u *s, char_u *end));
+  int dbcs_screen_tail_off __ARGS((char_u *base, char_u *p));
+  void mb_adjust_cursor __ARGS((void));
+! void mb_adjustpos __ARGS((buf_T *buf, pos_T *lp));
+  char_u *mb_prevptr __ARGS((char_u *line, char_u *p));
+  int mb_charlen __ARGS((char_u *str));
+  int mb_charlen_len __ARGS((char_u *str, int len));
+*** ../vim-7.3.238/src/proto/misc2.pro	2011-04-11 16:56:29.000000000 +0200
+--- src/proto/misc2.pro	2011-07-07 14:26:57.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,20 ----
+  linenr_T get_cursor_rel_lnum __ARGS((win_T *wp, linenr_T lnum));
+  void check_cursor_lnum __ARGS((void));
+  void check_cursor_col __ARGS((void));
++ void check_cursor_col_win __ARGS((win_T *win));
+  void check_cursor __ARGS((void));
+  void adjust_cursor_col __ARGS((void));
+  int leftcol_changed __ARGS((void));
+*** ../vim-7.3.238/src/version.c	2011-07-07 15:04:38.000000000 +0200
+--- src/version.c	2011-07-07 15:05:49.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     239,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+256. You are able to write down over 250 symptoms of being an internet
+     addict, even though they only asked for 101.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.240 b/source/ap/vim/patches/7.3.240
new file mode 100644
index 00000000..7048ac1f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.240
@@ -0,0 +1,795 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.240
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Note: I haven't verified this works or even compiles.  Please send me a
+patch if you see a problem and can fix it.
+
+Patch 7.3.240
+Problem:    External commands can't use pipes on MS-Windows.
+Solution:   Implement pipes and use them when 'shelltemp' isn't set. (Vincent
+	    Berthoux)
+Files:	    src/eval.c, src/ex_cmds.c, src/misc2.c, src/os_unix.c,
+	    src/os_win32.c, src/proto/misc2.pro, src/ui.c
+
+
+*** ../vim-7.3.239/src/eval.c	2011-06-19 02:55:32.000000000 +0200
+--- src/eval.c	2011-07-07 15:44:56.000000000 +0200
+***************
+*** 11931,11937 ****
+  #ifdef FEAT_SEARCHPATH
+  	"file_in_path",
+  #endif
+! #if defined(UNIX) && !defined(USE_SYSTEM)
+  	"filterpipe",
+  #endif
+  #ifdef FEAT_FIND_ID
+--- 11931,11937 ----
+  #ifdef FEAT_SEARCHPATH
+  	"file_in_path",
+  #endif
+! #if (defined(UNIX) && !defined(USE_SYSTEM)) || defined(WIN3264)
+  	"filterpipe",
+  #endif
+  #ifdef FEAT_FIND_ID
+*** ../vim-7.3.239/src/ex_cmds.c	2011-06-12 22:03:15.000000000 +0200
+--- src/ex_cmds.c	2011-07-07 15:44:56.000000000 +0200
+***************
+*** 1107,1113 ****
+      if (do_out)
+  	shell_flags |= SHELL_DOOUT;
+  
+! #if !defined(USE_SYSTEM) && defined(UNIX)
+      if (!do_in && do_out && !p_stmp)
+      {
+  	/* Use a pipe to fetch stdout of the command, do not use a temp file. */
+--- 1107,1113 ----
+      if (do_out)
+  	shell_flags |= SHELL_DOOUT;
+  
+! #if (!defined(USE_SYSTEM) && defined(UNIX)) || defined(WIN3264)
+      if (!do_in && do_out && !p_stmp)
+      {
+  	/* Use a pipe to fetch stdout of the command, do not use a temp file. */
+*** ../vim-7.3.239/src/misc2.c	2011-07-07 15:08:53.000000000 +0200
+--- src/misc2.c	2011-07-07 15:55:42.000000000 +0200
+***************
+*** 2146,2151 ****
+--- 2146,2170 ----
+      }
+  }
+  
++ #if (defined(UNIX) && !defined(USE_SYSTEM)) || defined(WIN3264)
++ /*
++  * Append the text in "gap" below the cursor line and clear "gap".
++  */
++     void
++ append_ga_line(gap)
++     garray_T	*gap;
++ {
++     /* Remove trailing CR. */
++     if (gap->ga_len > 0
++ 	    && !curbuf->b_p_bin
++ 	    && ((char_u *)gap->ga_data)[gap->ga_len - 1] == CAR)
++ 	--gap->ga_len;
++     ga_append(gap, NUL);
++     ml_append(curwin->w_cursor.lnum++, gap->ga_data, 0, FALSE);
++     gap->ga_len = 0;
++ }
++ #endif
++ 
+  /************************************************************************
+   * functions that use lookup tables for various things, generally to do with
+   * special key codes.
+*** ../vim-7.3.239/src/os_unix.c	2011-04-11 16:56:29.000000000 +0200
+--- src/os_unix.c	2011-07-07 15:54:58.000000000 +0200
+***************
+*** 3660,3686 ****
+      /* Nothing to do. */
+  }
+  
+- #ifndef USE_SYSTEM
+- static void append_ga_line __ARGS((garray_T *gap));
+- 
+- /*
+-  * Append the text in "gap" below the cursor line and clear "gap".
+-  */
+-     static void
+- append_ga_line(gap)
+-     garray_T	*gap;
+- {
+-     /* Remove trailing CR. */
+-     if (gap->ga_len > 0
+- 	    && !curbuf->b_p_bin
+- 	    && ((char_u *)gap->ga_data)[gap->ga_len - 1] == CAR)
+- 	--gap->ga_len;
+-     ga_append(gap, NUL);
+-     ml_append(curwin->w_cursor.lnum++, gap->ga_data, 0, FALSE);
+-     gap->ga_len = 0;
+- }
+- #endif
+- 
+      int
+  mch_call_shell(cmd, options)
+      char_u	*cmd;
+--- 3660,3665 ----
+*** ../vim-7.3.239/src/os_win32.c	2011-05-25 17:06:16.000000000 +0200
+--- src/os_win32.c	2011-07-07 16:08:30.000000000 +0200
+***************
+*** 417,422 ****
+--- 417,427 ----
+  static PGNSECINFO pGetNamedSecurityInfo;
+  #endif
+  
++ typedef BOOL (WINAPI *PSETHANDLEINFORMATION)(HANDLE, DWORD, DWORD);
++ 
++ static BOOL allowPiping = FALSE;
++ static PSETHANDLEINFORMATION pSetHandleInformation;
++ 
+  /*
+   * Set g_PlatformId to VER_PLATFORM_WIN32_NT (NT) or
+   * VER_PLATFORM_WIN32_WINDOWS (Win95).
+***************
+*** 467,472 ****
+--- 472,489 ----
+  	    }
+  	}
+  #endif
++ 	/*
++ 	 * If we are on windows NT, try to load the pipe functions, only
++ 	 * available from Win2K.
++ 	 */
++ 	if (g_PlatformId == VER_PLATFORM_WIN32_NT)
++ 	{
++ 	    HANDLE kernel32 = GetModuleHandle("kernel32");
++ 	    pSetHandleInformation = (PSETHANDLEINFORMATION)GetProcAddress(
++ 					    kernel32, "SetHandleInformation");
++ 
++ 	    allowPiping = pSetHandleInformation != NULL;
++ 	}
+  	done = TRUE;
+      }
+  }
+***************
+*** 1635,1641 ****
+  }
+  
+  #if ((defined(__MINGW32__) || defined (__CYGWIN32__)) && \
+!         __MSVCRT_VERSION__ >= 0x800) || (defined(_MSC_VER) && _MSC_VER >= 1400)
+  /*
+   * Bad parameter handler.
+   *
+--- 1652,1658 ----
+  }
+  
+  #if ((defined(__MINGW32__) || defined (__CYGWIN32__)) && \
+!        __MSVCRT_VERSION__ >= 0x800) || (defined(_MSC_VER) && _MSC_VER >= 1400)
+  /*
+   * Bad parameter handler.
+   *
+***************
+*** 3210,3216 ****
+   *    4. Prompt the user to press a key to close the console window
+   */
+      static int
+! mch_system(char *cmd, int options)
+  {
+      STARTUPINFO		si;
+      PROCESS_INFORMATION pi;
+--- 3227,3233 ----
+   *    4. Prompt the user to press a key to close the console window
+   */
+      static int
+! mch_system_classic(char *cmd, int options)
+  {
+      STARTUPINFO		si;
+      PROCESS_INFORMATION pi;
+***************
+*** 3315,3320 ****
+--- 3332,3829 ----
+  
+      return ret;
+  }
++ 
++ /*
++  * Thread launched by the gui to send the current buffer data to the
++  * process. This way avoid to hang up vim totally if the children
++  * process take a long time to process the lines.
++  */
++     static DWORD WINAPI
++ sub_process_writer(LPVOID param)
++ {
++     HANDLE	    g_hChildStd_IN_Wr = param;
++     linenr_T	    lnum = curbuf->b_op_start.lnum;
++     DWORD	    len = 0;
++     DWORD	    l;
++     char_u	    *lp = ml_get(lnum);
++     char_u	    *s;
++     int		    written = 0;
++ 
++     for (;;)
++     {
++ 	l = (DWORD)STRLEN(lp + written);
++ 	if (l == 0)
++ 	    len = 0;
++ 	else if (lp[written] == NL)
++ 	{
++ 	    /* NL -> NUL translation */
++ 	    WriteFile(g_hChildStd_IN_Wr, "", 1, &len, NULL);
++ 	}
++ 	else
++ 	{
++ 	    s = vim_strchr(lp + written, NL);
++ 	    WriteFile(g_hChildStd_IN_Wr, (char *)lp + written,
++ 		      s == NULL ? l : (DWORD)(s - (lp + written)),
++ 		      &len, NULL);
++ 	}
++ 	if (len == (int)l)
++ 	{
++ 	    /* Finished a line, add a NL, unless this line should not have
++ 	     * one. */
++ 	    if (lnum != curbuf->b_op_end.lnum
++ 		|| !curbuf->b_p_bin
++ 		|| (lnum != curbuf->b_no_eol_lnum
++ 		    && (lnum != curbuf->b_ml.ml_line_count
++ 			|| curbuf->b_p_eol)))
++ 	    {
++ 		WriteFile(g_hChildStd_IN_Wr, "\n", 1, &ignored, NULL);
++ 	    }
++ 
++ 	    ++lnum;
++ 	    if (lnum > curbuf->b_op_end.lnum)
++ 		break;
++ 
++ 	    lp = ml_get(lnum);
++ 	    written = 0;
++ 	}
++ 	else if (len > 0)
++ 	    written += len;
++     }
++ 
++     /* finished all the lines, close pipe */
++     CloseHandle(g_hChildStd_IN_Wr);
++     ExitThread(0);
++ }
++ 
++ 
++ # define BUFLEN 100	/* length for buffer, stolen from unix version */
++ 
++ /*
++  * This function read from the children's stdout and write the
++  * data on screen or in the buffer accordingly.
++  */
++     static void
++ dump_pipe(int	    options,
++ 	  HANDLE    g_hChildStd_OUT_Rd,
++ 	  garray_T  *ga,
++ 	  char_u    buffer[],
++ 	  DWORD	    *buffer_off)
++ {
++     DWORD	availableBytes = 0;
++     DWORD	i;
++     int		c;
++     char_u	*p;
++     int		ret;
++     DWORD	len;
++     DWORD	toRead;
++     int		repeatCount;
++ 
++     /* we query the pipe to see if there is any data to read
++      * to avoid to perform a blocking read */
++     ret = PeekNamedPipe(g_hChildStd_OUT_Rd, /* pipe to query */
++ 			NULL,		    /* optional buffer */
++ 			0,		    /* buffe size */
++ 			NULL,		    /* number of read bytes */
++ 			&availableBytes,    /* available bytes total */
++ 			NULL);		    /* byteLeft */
++ 
++     repeatCount = 0;
++     /* We got real data in the pipe, read it */
++     while (ret != 0 && availableBytes > 0 && availableBytes > 0)
++     {
++ 	repeatCount++;
++ 	toRead =
++ # ifdef FEAT_MBYTE
++ 		 (DWORD)(BUFLEN - *buffer_off);
++ # else
++ 		 (DWORD)BUFLEN;
++ # endif
++ 	toRead = availableBytes < toRead ? availableBytes : toRead;
++ 	ReadFile(g_hChildStd_OUT_Rd, buffer
++ # ifdef FEAT_MBYTE
++ 		 + *buffer_off, toRead
++ # else
++ 		 , toRead
++ # endif
++ 		 , &len, NULL);
++ 
++ 	/* If we haven't read anything, there is a problem */
++ 	if (len == 0)
++ 	    break;
++ 
++ 	availableBytes -= len;
++ 
++ 	if (options & SHELL_READ)
++ 	{
++ 	    /* Do NUL -> NL translation, append NL separated
++ 	     * lines to the current buffer. */
++ 	    for (i = 0; i < len; ++i)
++ 	    {
++ 		if (buffer[i] == NL)
++ 		    append_ga_line(ga);
++ 		else if (buffer[i] == NUL)
++ 		    ga_append(ga, NL);
++ 		else
++ 		    ga_append(ga, buffer[i]);
++ 	    }
++ 	}
++ # ifdef FEAT_MBYTE
++ 	else if (has_mbyte)
++ 	{
++ 	    int		l;
++ 
++ 	    len += *buffer_off;
++ 	    buffer[len] = NUL;
++ 
++ 	    /* Check if the last character in buffer[] is
++ 	     * incomplete, keep these bytes for the next
++ 	     * round. */
++ 	    for (p = buffer; p < buffer + len; p += l)
++ 	    {
++ 		l = mb_cptr2len(p);
++ 		if (l == 0)
++ 		    l = 1;  /* NUL byte? */
++ 		else if (MB_BYTE2LEN(*p) != l)
++ 		    break;
++ 	    }
++ 	    if (p == buffer)	/* no complete character */
++ 	    {
++ 		/* avoid getting stuck at an illegal byte */
++ 		if (len >= 12)
++ 		    ++p;
++ 		else
++ 		{
++ 		    *buffer_off = len;
++ 		    return;
++ 		}
++ 	    }
++ 	    c = *p;
++ 	    *p = NUL;
++ 	    msg_puts(buffer);
++ 	    if (p < buffer + len)
++ 	    {
++ 		*p = c;
++ 		*buffer_off = (DWORD)((buffer + len) - p);
++ 		mch_memmove(buffer, p, *buffer_off);
++ 		return;
++ 	    }
++ 	    *buffer_off = 0;
++ 	}
++ # endif /* FEAT_MBYTE */
++ 	else
++ 	{
++ 	    buffer[len] = NUL;
++ 	    msg_puts(buffer);
++ 	}
++ 
++ 	windgoto(msg_row, msg_col);
++ 	cursor_on();
++ 	out_flush();
++     }
++ }
++ 
++ /*
++  * Version of system to use for windows NT > 5.0 (Win2K), use pipe
++  * for communication and doesn't open any new window.
++  */
++     static int
++ mch_system_piped(char *cmd, int options)
++ {
++     STARTUPINFO		si;
++     PROCESS_INFORMATION pi;
++     DWORD		ret = 0;
++ 
++     HANDLE g_hChildStd_IN_Rd = NULL;
++     HANDLE g_hChildStd_IN_Wr = NULL;
++     HANDLE g_hChildStd_OUT_Rd = NULL;
++     HANDLE g_hChildStd_OUT_Wr = NULL;
++ 
++     char_u	buffer[BUFLEN + 1]; /* reading buffer + size */
++     DWORD	len;
++ 
++     /* buffer used to receive keys */
++     char_u	ta_buf[BUFLEN + 1];	/* TypeAHead */
++     int		ta_len = 0;		/* valid bytes in ta_buf[] */
++ 
++     DWORD	i;
++     int		c;
++     int		noread_cnt = 0;
++     garray_T	ga;
++     int	    delay = 1;
++ # ifdef FEAT_MBYTE
++     DWORD	buffer_off = 0;	/* valid bytes in buffer[] */
++ # endif
++ 
++     SECURITY_ATTRIBUTES saAttr;
++ 
++     /* Set the bInheritHandle flag so pipe handles are inherited. */
++     saAttr.nLength = sizeof(SECURITY_ATTRIBUTES);
++     saAttr.bInheritHandle = TRUE;
++     saAttr.lpSecurityDescriptor = NULL;
++ 
++     if ( ! CreatePipe(&g_hChildStd_OUT_Rd, &g_hChildStd_OUT_Wr, &saAttr, 0)
++ 	/* Ensure the read handle to the pipe for STDOUT is not inherited. */
++        || ! pSetHandleInformation(g_hChildStd_OUT_Rd, HANDLE_FLAG_INHERIT, 0)
++ 	/* Create a pipe for the child process's STDIN. */
++        || ! CreatePipe(&g_hChildStd_IN_Rd, &g_hChildStd_IN_Wr, &saAttr, 0)
++ 	/* Ensure the write handle to the pipe for STDIN is not inherited. */
++        || ! pSetHandleInformation(g_hChildStd_IN_Wr, HANDLE_FLAG_INHERIT, 0) )
++     {
++ 	CloseHandle(g_hChildStd_IN_Rd);
++ 	CloseHandle(g_hChildStd_IN_Wr);
++ 	CloseHandle(g_hChildStd_OUT_Rd);
++ 	CloseHandle(g_hChildStd_OUT_Wr);
++ 	MSG_PUTS(_("\nCannot create pipes\n"));
++     }
++ 
++     si.cb = sizeof(si);
++     si.lpReserved = NULL;
++     si.lpDesktop = NULL;
++     si.lpTitle = NULL;
++     si.dwFlags = STARTF_USESHOWWINDOW | STARTF_USESTDHANDLES;
++ 
++     /* set-up our file redirection */
++     si.hStdError = g_hChildStd_OUT_Wr;
++     si.hStdOutput = g_hChildStd_OUT_Wr;
++     si.hStdInput = g_hChildStd_IN_Rd;
++     si.wShowWindow = SW_HIDE;
++     si.cbReserved2 = 0;
++     si.lpReserved2 = NULL;
++ 
++     if (options & SHELL_READ)
++ 	ga_init2(&ga, 1, BUFLEN);
++ 
++     /* Now, run the command */
++     CreateProcess(NULL,			/* Executable name */
++ 		  cmd,			/* Command to execute */
++ 		  NULL,			/* Process security attributes */
++ 		  NULL,			/* Thread security attributes */
++ 
++ 		  // this command can be litigeous, handle inheritence was
++ 		  // deactivated for pending temp file, but, if we deactivate
++ 		  // it, the pipes don't work for some reason.
++ 		  TRUE,			/* Inherit handles, first deactivated,
++ 					 * but needed */
++ 		  CREATE_DEFAULT_ERROR_MODE, /* Creation flags */
++ 		  NULL,			/* Environment */
++ 		  NULL,			/* Current directory */
++ 		  &si,			/* Startup information */
++ 		  &pi);			/* Process information */
++ 
++ 
++     /* Close our unused side of the pipes */
++     CloseHandle(g_hChildStd_IN_Rd);
++     CloseHandle(g_hChildStd_OUT_Wr);
++ 
++     if (options & SHELL_WRITE)
++     {
++ 	HANDLE thread =
++ 	   CreateThread(NULL,  /* security attributes */
++ 			0,     /* default stack size */
++ 			sub_process_writer, /* function to be executed */
++ 			g_hChildStd_IN_Wr,  /* parameter */
++ 			0,		 /* creation flag, start immediately */
++ 			NULL);		    /* we don't care about thread id */
++ 	CloseHandle(thread);
++ 	g_hChildStd_IN_Wr = NULL;
++     }
++ 
++     /* Keep updating the window while waiting for the shell to finish. */
++     for (;;)
++     {
++ 	MSG	msg;
++ 
++ 	if (PeekMessage(&msg, (HWND)NULL, 0, 0, PM_REMOVE))
++ 	{
++ 	    TranslateMessage(&msg);
++ 	    DispatchMessage(&msg);
++ 	}
++ 
++ 	/* write pipe information in the window */
++ 	if ((options & (SHELL_READ|SHELL_WRITE))
++ # ifdef FEAT_GUI
++ 		|| gui.in_use
++ # endif
++ 	    )
++ 	{
++ 	    len = 0;
++ 	    if (!(options & SHELL_EXPAND)
++ 		&& ((options &
++ 			(SHELL_READ|SHELL_WRITE|SHELL_COOKED))
++ 		    != (SHELL_READ|SHELL_WRITE|SHELL_COOKED)
++ # ifdef FEAT_GUI
++ 		    || gui.in_use
++ # endif
++ 		    )
++ 		&& (ta_len > 0 || noread_cnt > 4))
++ 	    {
++ 		if (ta_len == 0)
++ 		{
++ 		    /* Get extra characters when we don't have any.  Reset the
++ 		     * counter and timer. */
++ 		    noread_cnt = 0;
++ # if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)
++ 		    gettimeofday(&start_tv, NULL);
++ # endif
++ 		    len = ui_inchar(ta_buf, BUFLEN, 10L, 0);
++ 		}
++ 		if (ta_len > 0 || len > 0)
++ 		{
++ 		    /*
++ 		     * For pipes: Check for CTRL-C: send interrupt signal to
++ 		     * child.  Check for CTRL-D: EOF, close pipe to child.
++ 		     */
++ 		    if (len == 1 && cmd != NULL)
++ 		    {
++ 			if (ta_buf[ta_len] == Ctrl_C)
++ 			{
++ 			    /* Learn what exit code is expected, for
++ 				* now put 9 as SIGKILL */
++ 			    TerminateProcess(pi.hProcess, 9);
++ 			}
++ 			if (ta_buf[ta_len] == Ctrl_D)
++ 			{
++ 			    CloseHandle(g_hChildStd_IN_Wr);
++ 			    g_hChildStd_IN_Wr = NULL;
++ 			}
++ 		    }
++ 
++ 		    /* replace K_BS by <BS> and K_DEL by <DEL> */
++ 		    for (i = ta_len; i < ta_len + len; ++i)
++ 		    {
++ 			if (ta_buf[i] == CSI && len - i > 2)
++ 			{
++ 			    c = TERMCAP2KEY(ta_buf[i + 1], ta_buf[i + 2]);
++ 			    if (c == K_DEL || c == K_KDEL || c == K_BS)
++ 			    {
++ 				mch_memmove(ta_buf + i + 1, ta_buf + i + 3,
++ 					    (size_t)(len - i - 2));
++ 				if (c == K_DEL || c == K_KDEL)
++ 				    ta_buf[i] = DEL;
++ 				else
++ 				    ta_buf[i] = Ctrl_H;
++ 				len -= 2;
++ 			    }
++ 			}
++ 			else if (ta_buf[i] == '\r')
++ 			    ta_buf[i] = '\n';
++ # ifdef FEAT_MBYTE
++ 			if (has_mbyte)
++ 			    i += (*mb_ptr2len_len)(ta_buf + i,
++ 						    ta_len + len - i) - 1;
++ # endif
++ 		    }
++ 
++ 		    /*
++ 		     * For pipes: echo the typed characters.  For a pty this
++ 		     * does not seem to work.
++ 		     */
++ 		    for (i = ta_len; i < ta_len + len; ++i)
++ 		    {
++ 			if (ta_buf[i] == '\n' || ta_buf[i] == '\b')
++ 			    msg_putchar(ta_buf[i]);
++ # ifdef FEAT_MBYTE
++ 			else if (has_mbyte)
++ 			{
++ 			    int l = (*mb_ptr2len)(ta_buf + i);
++ 
++ 			    msg_outtrans_len(ta_buf + i, l);
++ 			    i += l - 1;
++ 			}
++ # endif
++ 			else
++ 			    msg_outtrans_len(ta_buf + i, 1);
++ 		    }
++ 		    windgoto(msg_row, msg_col);
++ 		    out_flush();
++ 
++ 		    ta_len += len;
++ 
++ 		    /*
++ 		     * Write the characters to the child, unless EOF has been
++ 		     * typed for pipes.  Write one character at a time, to
++ 		     * avoid losing too much typeahead.  When writing buffer
++ 		     * lines, drop the typed characters (only check for
++ 		     * CTRL-C).
++ 		     */
++ 		    if (options & SHELL_WRITE)
++ 			ta_len = 0;
++ 		    else if (g_hChildStd_IN_Wr != NULL)
++ 		    {
++ 			WriteFile(g_hChildStd_IN_Wr, (char*)ta_buf,
++ 				    1, &len, NULL);
++ 			// if we are typing in, we want to keep things reactive
++ 			delay = 1;
++ 			if (len > 0)
++ 			{
++ 			    ta_len -= len;
++ 			    mch_memmove(ta_buf, ta_buf + len, ta_len);
++ 			}
++ 		    }
++ 		}
++ 	    }
++ 	}
++ 
++ 	if (ta_len)
++ 	    ui_inchar_undo(ta_buf, ta_len);
++ 
++ 	if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
++ 	{
++ 	    dump_pipe(options, g_hChildStd_OUT_Rd,
++ 			&ga, buffer, &buffer_off);
++ 	    break;
++ 	}
++ 
++ 	++noread_cnt;
++ 	dump_pipe(options, g_hChildStd_OUT_Rd,
++ 		    &ga, buffer, &buffer_off);
++ 
++ 	/* We start waiting for a very short time and then increase it, so
++ 	 * that we respond quickly when the process is quick, and don't
++ 	 * consume too much overhead when it's slow. */
++ 	if (delay < 50)
++ 	    delay += 10;
++     }
++ 
++     /* Close the pipe */
++     CloseHandle(g_hChildStd_OUT_Rd);
++     if (g_hChildStd_IN_Wr != NULL)
++ 	CloseHandle(g_hChildStd_IN_Wr);
++ 
++     WaitForSingleObject(pi.hProcess, INFINITE);
++ 
++     /* Get the command exit code */
++     GetExitCodeProcess(pi.hProcess, &ret);
++ 
++     if (options & SHELL_READ)
++     {
++ 	if (ga.ga_len > 0)
++ 	{
++ 	    append_ga_line(&ga);
++ 	    /* remember that the NL was missing */
++ 	    curbuf->b_no_eol_lnum = curwin->w_cursor.lnum;
++ 	}
++ 	else
++ 	    curbuf->b_no_eol_lnum = 0;
++ 	ga_clear(&ga);
++     }
++ 
++     /* Close the handles to the subprocess, so that it goes away */
++     CloseHandle(pi.hThread);
++     CloseHandle(pi.hProcess);
++ 
++     return ret;
++ }
++ 
++     static int
++ mch_system(char *cmd, int options)
++ {
++     /* if we can pipe and the shelltemp option is off */
++     if (allowPiping && !p_stmp)
++ 	return mch_system_piped(cmd, options);
++     else
++ 	return mch_system_classic(cmd, options);
++ }
+  #else
+  
+  # define mch_system(c, o) system(c)
+***************
+*** 3388,3394 ****
+  	char_u *newcmd;
+  	long_u cmdlen =  (
+  #ifdef FEAT_GUI_W32
+! 		STRLEN(vimrun_path) +
+  #endif
+  		STRLEN(p_sh) + STRLEN(p_shcf) + STRLEN(cmd) + 10);
+  
+--- 3897,3903 ----
+  	char_u *newcmd;
+  	long_u cmdlen =  (
+  #ifdef FEAT_GUI_W32
+! 		(allowPiping && !p_stmp ? 0 : STRLEN(vimrun_path)) +
+  #endif
+  		STRLEN(p_sh) + STRLEN(p_shcf) + STRLEN(cmd) + 10);
+  
+***************
+*** 3497,3503 ****
+  			    MB_ICONWARNING);
+  		    need_vimrun_warning = FALSE;
+  		}
+! 		if (!s_dont_use_vimrun)
+  		    /* Use vimrun to execute the command.  It opens a console
+  		     * window, which can be closed without killing Vim. */
+  		    vim_snprintf((char *)newcmd, cmdlen, "%s%s%s %s %s",
+--- 4006,4012 ----
+  			    MB_ICONWARNING);
+  		    need_vimrun_warning = FALSE;
+  		}
+! 		if (!s_dont_use_vimrun && (!allowPiping || p_stmp))
+  		    /* Use vimrun to execute the command.  It opens a console
+  		     * window, which can be closed without killing Vim. */
+  		    vim_snprintf((char *)newcmd, cmdlen, "%s%s%s %s %s",
+***************
+*** 3521,3527 ****
+      /* Print the return value, unless "vimrun" was used. */
+      if (x != 0 && !(options & SHELL_SILENT) && !emsg_silent
+  #if defined(FEAT_GUI_W32)
+! 		&& ((options & SHELL_DOOUT) || s_dont_use_vimrun)
+  #endif
+  	    )
+      {
+--- 4030,4037 ----
+      /* Print the return value, unless "vimrun" was used. */
+      if (x != 0 && !(options & SHELL_SILENT) && !emsg_silent
+  #if defined(FEAT_GUI_W32)
+! 		&& ((options & SHELL_DOOUT) || s_dont_use_vimrun
+! 						  || (allowPiping && !p_stmp))
+  #endif
+  	    )
+      {
+*** ../vim-7.3.239/src/proto/misc2.pro	2011-07-07 15:08:53.000000000 +0200
+--- src/proto/misc2.pro	2011-07-07 15:56:16.000000000 +0200
+***************
+*** 58,63 ****
+--- 58,64 ----
+  char_u *ga_concat_strings __ARGS((garray_T *gap));
+  void ga_concat __ARGS((garray_T *gap, char_u *s));
+  void ga_append __ARGS((garray_T *gap, int c));
++ void append_ga_line __ARGS((garray_T *gap));
+  int name_to_mod_mask __ARGS((int c));
+  int simplify_key __ARGS((int key, int *modifiers));
+  int handle_x_keys __ARGS((int key));
+*** ../vim-7.3.239/src/ui.c	2011-06-19 01:14:23.000000000 +0200
+--- src/ui.c	2011-07-07 15:44:56.000000000 +0200
+***************
+*** 58,64 ****
+  #endif
+  }
+  
+! #if defined(UNIX) || defined(VMS) || defined(PROTO)
+  /*
+   * When executing an external program, there may be some typed characters that
+   * are not consumed by it.  Give them back to ui_inchar() and they are stored
+--- 58,64 ----
+  #endif
+  }
+  
+! #if defined(UNIX) || defined(VMS) || defined(PROTO) || defined(WIN3264)
+  /*
+   * When executing an external program, there may be some typed characters that
+   * are not consumed by it.  Give them back to ui_inchar() and they are stored
+*** ../vim-7.3.239/src/version.c	2011-07-07 15:08:53.000000000 +0200
+--- src/version.c	2011-07-07 16:14:20.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     240,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+257. Your "hundred-and-one" lists include well over 101 items, since you
+     automatically interpret all numbers in hexadecimal notation.
+     (hex 101 = decimal 257)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.241 b/source/ap/vim/patches/7.3.241
new file mode 100644
index 00000000..3b73c4de
--- /dev/null
+++ b/source/ap/vim/patches/7.3.241
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.241
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.241
+Problem:    Using CTRL-R CTRL-W on the command line may insert only part of
+	    the word.
+Solution:   Use the cursor position instead of assuming it is at the end of
+	    the command. (Tyru)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.240/src/ex_getln.c	2011-07-07 15:04:38.000000000 +0200
+--- src/ex_getln.c	2011-07-07 16:38:50.000000000 +0200
+***************
+*** 3046,3052 ****
+  	    int	    len;
+  
+  	    /* Locate start of last word in the cmd buffer. */
+! 	    for (w = ccline.cmdbuff + ccline.cmdlen; w > ccline.cmdbuff; )
+  	    {
+  #ifdef FEAT_MBYTE
+  		if (has_mbyte)
+--- 3046,3052 ----
+  	    int	    len;
+  
+  	    /* Locate start of last word in the cmd buffer. */
+! 	    for (w = ccline.cmdbuff + ccline.cmdpos; w > ccline.cmdbuff; )
+  	    {
+  #ifdef FEAT_MBYTE
+  		if (has_mbyte)
+***************
+*** 3064,3070 ****
+  		    --w;
+  		}
+  	    }
+! 	    len = (int)((ccline.cmdbuff + ccline.cmdlen) - w);
+  	    if (p_ic ? STRNICMP(w, arg, len) == 0 : STRNCMP(w, arg, len) == 0)
+  		p += len;
+  	}
+--- 3064,3070 ----
+  		    --w;
+  		}
+  	    }
+! 	    len = (int)((ccline.cmdbuff + ccline.cmdpos) - w);
+  	    if (p_ic ? STRNICMP(w, arg, len) == 0 : STRNCMP(w, arg, len) == 0)
+  		p += len;
+  	}
+*** ../vim-7.3.240/src/version.c	2011-07-07 16:20:45.000000000 +0200
+--- src/version.c	2011-07-07 16:41:29.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     241,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+258. When you want to see your girlfriend, you surf to her homepage.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.242 b/source/ap/vim/patches/7.3.242
new file mode 100644
index 00000000..0cf4db92
--- /dev/null
+++ b/source/ap/vim/patches/7.3.242
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.242
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.242
+Problem:    Illegal memory access in after_pathsep().
+Solution:   Check that the pointer is not at the start of the file name.
+	    (Dominique Pelle)
+Files:	    src/misc2.c
+
+
+*** ../vim-7.3.241/src/misc2.c	2011-07-07 16:20:45.000000000 +0200
+--- src/misc2.c	2011-07-07 17:05:41.000000000 +0200
+***************
+*** 3247,3253 ****
+  #if defined(FEAT_MBYTE) || defined(PROTO)
+  /*
+   * Return TRUE if "p" points to just after a path separator.
+!  * Take care of multi-byte characters.
+   * "b" must point to the start of the file name
+   */
+      int
+--- 3247,3253 ----
+  #if defined(FEAT_MBYTE) || defined(PROTO)
+  /*
+   * Return TRUE if "p" points to just after a path separator.
+!  * Takes care of multi-byte characters.
+   * "b" must point to the start of the file name
+   */
+      int
+***************
+*** 3255,3261 ****
+      char_u	*b;
+      char_u	*p;
+  {
+!     return vim_ispathsep(p[-1])
+  			     && (!has_mbyte || (*mb_head_off)(b, p - 1) == 0);
+  }
+  #endif
+--- 3255,3261 ----
+      char_u	*b;
+      char_u	*p;
+  {
+!     return p > b && vim_ispathsep(p[-1])
+  			     && (!has_mbyte || (*mb_head_off)(b, p - 1) == 0);
+  }
+  #endif
+*** ../vim-7.3.241/src/version.c	2011-07-07 16:44:33.000000000 +0200
+--- src/version.c	2011-07-07 17:05:49.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     242,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+260. Co-workers have to E-mail you about the fire alarm to get
+     you out of the building.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.243 b/source/ap/vim/patches/7.3.243
new file mode 100644
index 00000000..f1f913d4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.243
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.243
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.243
+Problem:    Illegal memory access in readline().
+Solution:   Swap the conditions. (Dominique Pelle)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.242/src/eval.c	2011-07-07 16:20:45.000000000 +0200
+--- src/eval.c	2011-07-07 17:32:16.000000000 +0200
+***************
+*** 14318,14324 ****
+  	tolist = 0;
+  	for ( ; filtd < buflen || readlen <= 0; ++filtd)
+  	{
+! 	    if (buf[filtd] == '\n' || readlen <= 0)
+  	    {
+  		/* In binary mode add an empty list item when the last
+  		 * non-empty line ends in a '\n'. */
+--- 14318,14324 ----
+  	tolist = 0;
+  	for ( ; filtd < buflen || readlen <= 0; ++filtd)
+  	{
+! 	    if (readlen <= 0 || buf[filtd] == '\n')
+  	    {
+  		/* In binary mode add an empty list item when the last
+  		 * non-empty line ends in a '\n'. */
+*** ../vim-7.3.242/src/version.c	2011-07-07 17:15:29.000000000 +0200
+--- src/version.c	2011-07-07 17:32:30.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     243,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+261. You find diskettes in your pockets when doing laundry.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.244 b/source/ap/vim/patches/7.3.244
new file mode 100644
index 00000000..4cff94f2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.244
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.244
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.244
+Problem:    MS-Windows: Build problem with old compiler. (John Beckett)
+Solution:   Only use HandleToLong() when available. (Mike Williams)
+Files:	    src/gui_w32.c
+
+
+*** ../vim-7.3.243/src/gui_w32.c	2011-05-25 21:18:02.000000000 +0200
+--- src/gui_w32.c	2011-07-07 17:42:36.000000000 +0200
+***************
+*** 1574,1579 ****
+--- 1574,1583 ----
+  #endif
+  
+  #ifdef FEAT_EVAL
++ # if _MSC_VER < 1400
++ /* HandleToLong() only exists in compilers that can do 64 bit builds */
++ #  define HandleToLong(h) ((long)(h))
++ # endif
+      /* set the v:windowid variable */
+      set_vim_var_nr(VV_WINDOWID, HandleToLong(s_hwnd));
+  #endif
+*** ../vim-7.3.243/src/version.c	2011-07-07 17:36:52.000000000 +0200
+--- src/version.c	2011-07-07 17:43:21.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     244,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+262. Your computer has it's own phone line - but your daughter doesn't.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.245 b/source/ap/vim/patches/7.3.245
new file mode 100644
index 00000000..b05fe433
--- /dev/null
+++ b/source/ap/vim/patches/7.3.245
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.245
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.245
+Problem:    Python 3.2 libraries not correctly detected.
+Solution:   Add the suffix to the library name. (Niclas Zeising)
+Files:	    src/auto/configure, src/configure.in
+
+
+*** ../vim-7.3.244/src/auto/configure	2011-06-13 01:32:42.000000000 +0200
+--- src/auto/configure	2011-07-13 17:57:05.000000000 +0200
+***************
+*** 5611,5617 ****
+  eof
+                      eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+!           vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+            vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+                      vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+--- 5611,5617 ----
+  eof
+                      eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+! 	  vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags}"
+            vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+                      vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-lffi//`
+*** ../vim-7.3.244/src/configure.in	2011-06-13 01:32:42.000000000 +0200
+--- src/configure.in	2011-07-13 17:57:01.000000000 +0200
+***************
+*** 1068,1074 ****
+            dnl -- delete the lines from make about Entering/Leaving directory
+            eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+!           vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}"
+            vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+            dnl remove -ltermcap, it can conflict with an earlier -lncurses
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+--- 1068,1074 ----
+            dnl -- delete the lines from make about Entering/Leaving directory
+            eval "`cd ${PYTHON3_CONFDIR} && make -f "${tmp_mkf}" __ | sed '/ directory /d'`"
+            rm -f -- "${tmp_mkf}"
+! 	  vi_cv_path_python3_plibs="-L${PYTHON3_CONFDIR} -lpython${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags}"
+            vi_cv_path_python3_plibs="${vi_cv_path_python3_plibs} ${python3_BASEMODLIBS} ${python3_LIBS} ${python3_SYSLIBS}"
+            dnl remove -ltermcap, it can conflict with an earlier -lncurses
+            vi_cv_path_python3_plibs=`echo $vi_cv_path_python3_plibs | sed s/-ltermcap//`
+*** ../vim-7.3.244/src/version.c	2011-07-07 17:43:37.000000000 +0200
+--- src/version.c	2011-07-15 13:09:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     245,
+  /**/
+
+
+-- 
+       When danger reared its ugly head,
+       He bravely turned his tail and fled
+       Yes, Brave Sir Robin turned about
+       And gallantly he chickened out
+       Bravely taking to his feet
+       He beat a very brave retreat
+       Bravest of the brave Sir Robin
+       Petrified of being dead
+       Soiled his pants then brave Sir Robin
+       Turned away and fled.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.246 b/source/ap/vim/patches/7.3.246
new file mode 100644
index 00000000..d9982ea0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.246
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.246
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.246 (after 7.3.235)
+Problem:    Repeating "f4" in "4444" skips one 4.
+Solution:   Check the t_cmd flag. (Christian Brabandt)
+Files:	    src/search.c
+
+
+*** ../vim-7.3.245/src/search.c	2011-06-26 05:36:07.000000000 +0200
+--- src/search.c	2011-07-15 13:16:49.000000000 +0200
+***************
+*** 1585,1591 ****
+  	/* Force a move of at least one char, so ";" and "," will move the
+  	 * cursor, even if the cursor is right in front of char we are looking
+  	 * at. */
+! 	if (vim_strchr(p_cpo, CPO_SCOLON) == NULL && count == 1)
+  	    stop = FALSE;
+      }
+  
+--- 1585,1591 ----
+  	/* Force a move of at least one char, so ";" and "," will move the
+  	 * cursor, even if the cursor is right in front of char we are looking
+  	 * at. */
+! 	if (vim_strchr(p_cpo, CPO_SCOLON) == NULL && count == 1 && t_cmd)
+  	    stop = FALSE;
+      }
+  
+*** ../vim-7.3.245/src/version.c	2011-07-15 13:09:46.000000000 +0200
+--- src/version.c	2011-07-15 13:20:40.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     246,
+  /**/
+
+-- 
+   GALAHAD turns back.  We see from his POV the lovely ZOOT standing by him
+   smiling enchantingly and a number of equally delectable GIRLIES draped
+   around in the seductively poulticed room.  They look at him smilingly and
+   wave.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.247 b/source/ap/vim/patches/7.3.247
new file mode 100644
index 00000000..a0cb566c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.247
@@ -0,0 +1,95 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.247
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.247
+Problem:    Running tests changes the users viminfo file.  Test for patch 
+            7.3.246 missing.
+Solution:   Add "nviminfo" to the 'viminfo' option.  Include the test.
+Files:      src/testdir/test78.in, src/testdir/test81.in
+
+
+*** ../vim-7.3.246/src/testdir/test78.in	2011-06-13 01:07:22.000000000 +0200
+--- src/testdir/test78.in	2011-07-15 13:26:22.000000000 +0200
+***************
+*** 6,12 ****
+  
+  STARTTEST
+  :so small.vim
+! :set nocp fileformat=unix undolevels=-1
+  :e! Xtest
+  ggdG
+  :let text = "\tabcdefghijklmnoparstuvwxyz0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnoparstuvwxyz0123456789"
+--- 6,12 ----
+  
+  STARTTEST
+  :so small.vim
+! :set nocp fileformat=unix undolevels=-1 viminfo+=nviminfo
+  :e! Xtest
+  ggdG
+  :let text = "\tabcdefghijklmnoparstuvwxyz0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnoparstuvwxyz0123456789"
+*** ../vim-7.3.246/src/testdir/test81.in	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/test81.in	2011-07-15 13:25:00.000000000 +0200
+***************
+*** 1,10 ****
+  Test for t movement command and 'cpo-;' setting
+  
+  STARTTEST
+! :set nocompatible
+  :set cpo-=;
+  /firstline/
+  j0tt;D
+  $Ty;D:set cpo+=;
+  j0tt;;D
+  $Ty;;D:?firstline?+1,$w! test.out
+--- 1,12 ----
+  Test for t movement command and 'cpo-;' setting
+  
+  STARTTEST
+! :set nocompatible viminfo+=nviminfo
+  :set cpo-=;
+  /firstline/
+  j0tt;D
++ 0fz;D
++ $Fy;D
+  $Ty;D:set cpo+=;
+  j0tt;;D
+  $Ty;;D:?firstline?+1,$w! test.out
+***************
+*** 13,18 ****
+--- 15,22 ----
+  
+  firstline
+  aaa two three four
++     zzz
++ yyy   
+  bbb yee yoo four
+  ccc two three four
+  ddd yee yoo four
+*** ../vim-7.3.246/src/version.c	2011-07-15 13:21:24.000000000 +0200
+--- src/version.c	2011-07-15 13:31:14.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     247,
+  /**/
+
+-- 
+ZOOT:  I'm afraid our life must seem very dull and quiet compared to yours.
+       We are but eightscore young blondes, all between sixteen and
+       nineteen-and-a-half, cut off in this castle, with no one to protect us.
+       Oooh.  It is a lonely life ... bathing ...  dressing ... undressing ...
+       making exciting underwear....
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.248 b/source/ap/vim/patches/7.3.248
new file mode 100644
index 00000000..6fbf3f6c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.248
@@ -0,0 +1,129 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.248
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.248
+Problem:    PC Install instructions missing install instructions.
+Solution:   Step-by-step explanation. (Michael Soyka)
+Files:	    src/INSTALLpc.txt
+
+
+*** ../vim-7.3.247/src/INSTALLpc.txt	2011-06-12 20:36:00.000000000 +0200
+--- src/INSTALLpc.txt	2011-07-15 13:49:46.000000000 +0200
+***************
+*** 11,19 ****
+  this, then you will get the default behavior as is documented, which should
+  be fine for most people.
+  
+! With the exception of the last two sections (Windows 3.1 and MS-DOS),
+! this document assumes that you are building Vim for Win32
+! (Windows NT/2000/XP/2003/Vista and Windows 95/98/Me)
+  
+  
+  Contents:
+--- 11,19 ----
+  this, then you will get the default behavior as is documented, which should
+  be fine for most people.
+  
+! With the exception of two sections (Windows 3.1 and MS-DOS), this document
+! assumes that you are building Vim for Win32 or later.
+! (Windows 95/98/Me/NT/2000/XP/2003/Vista/7)
+  
+  
+  Contents:
+***************
+*** 27,32 ****
+--- 27,35 ----
+  8. Windows 3.1
+  9. MS-DOS
+  
++ 10. Installing after building from sources
++ 
++ 
+  The currently preferred method is using the free Visual C++ Toolkit 2008
+  |msvc-2008-express|, the produced binary runs on most MS-Windows systems.  If
+  you need the executable to run on Windows 98 or ME, use the 2003 one
+***************
+*** 409,411 ****
+--- 412,470 ----
+  
+  If you get all kinds of strange error messages when compiling, try adding
+  changing the file format from "unix" to "dos".
++ 
++ 
++ 10. Installing after building from sources
++ ==========================================
++ 
++ [provided by Michael Soyka]
++ 
++ After you've built the Vim binaries as described above, you're ready to
++ install Vim on your system.  However, if you've obtained the Vim sources
++ using Mercurial or by downloading them as a unix tar file, you must first 
++ create a "vim73" directory.  If you instead downloaded the sources as
++ zip files, you can skip this setup as the zip archives already have the
++ correct directory structure.  
++ 
++   A.  Create a Vim "runtime" subdirectory named "vim73"
++   -----------------------------------------------------
++   If you obtained your Vim sources as zip files, you can skip this step.  
++   Otherwise, continue reading.
++ 
++   Go to the directory that contains the Vim "src" and "runtime"
++   directories and create a new subdirectory named "vim73".  
++   
++   Copy the "runtime" files into "vim73":
++      copy runtime\* vim73
++ 
++   B.  Copy the new binaries into the "vim73" directory
++   ----------------------------------------------------
++   Regardless of how you installed the Vim sources, you need to copy the
++   new binaries you created above into "vim73":
++ 
++      copy src\*.exe vim73
++      copy src\GvimExt\gvimext.dll vim73
++      copy src\xxd\xxd.exe vim73
++ 
++   C.  Move the "vim73" directory into the Vim installation subdirectory
++   ---------------------------------------------------------------------
++   Move the "vim73" subdirectory into the subdirectory where you want Vim
++   to be installed.  Typically, this subdirectory will be named "vim".  
++   If you already have a "vim73" subdirectory in "vim", delete it first
++   by running its unstal.exe program.  
++ 
++   D.  Install Vim
++   ---------------
++   "cd" to your Vim installation subdirectory "vim\vim73" and run the
++   "install.exe" program.  It will ask you a number of questions about
++   how you would like to have your Vim setup.  Among these are:
++   - You can tell it to write a "_vimrc" file with your preferences in the
++     parent directory.
++   - It can also install an "Edit with Vim" entry in the Windows Explorer
++     popup menu.
++   - You can have it create batch files, so that you can run Vim from the
++     console or in a shell.  You can select one of the directories in your
++     PATH or add the directory to PATH using the Windows Control Panel.  
++   - Create entries for Vim on the desktop and in the Start menu.
++ 
++ Happy Vimming!
+*** ../vim-7.3.247/src/version.c	2011-07-15 13:33:17.000000000 +0200
+--- src/version.c	2011-07-15 13:51:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     248,
+  /**/
+
+-- 
+Linux is just like a wigwam: no Windows, no Gates and an Apache inside.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.249 b/source/ap/vim/patches/7.3.249
new file mode 100644
index 00000000..661f9797
--- /dev/null
+++ b/source/ap/vim/patches/7.3.249
@@ -0,0 +1,134 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.249
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.249
+Problem:    Wrong indenting for array initializer.
+Solution:   Detect '}' in a better way. (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.248/src/misc1.c	2011-06-12 21:51:01.000000000 +0200
+--- src/misc1.c	2011-07-15 14:06:44.000000000 +0200
+***************
+*** 7945,7952 ****
+  			 * If we're at the end of a block, skip to the start of
+  			 * that block.
+  			 */
+! 			curwin->w_cursor.col = 0;
+! 			if (*cin_skipcomment(l) == '}'
+  				&& (trypos = find_start_brace(ind_maxcomment))
+  							    != NULL) /* XXX */
+  			{
+--- 7945,7951 ----
+  			 * If we're at the end of a block, skip to the start of
+  			 * that block.
+  			 */
+! 			if (find_last_paren(l, '{', '}')
+  				&& (trypos = find_start_brace(ind_maxcomment))
+  							    != NULL) /* XXX */
+  			{
+*** ../vim-7.3.248/src/testdir/test3.in	2011-06-12 21:51:01.000000000 +0200
+--- src/testdir/test3.in	2011-07-15 14:03:41.000000000 +0200
+***************
+*** 1452,1457 ****
+--- 1452,1487 ----
+  
+  STARTTEST
+  :set cino&
++ :set cino+=l1
++ 2kdd=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	int tab[] =
++ 	{
++ 		1, 2, 3,
++ 		4, 5, 6};
++ 
++ 	printf("Indent this line correctly!\n");
++ 
++ 	switch (foo)
++ 	{
++ 		case bar:
++ 			printf("bar");
++ 			break;
++ 		case baz: {
++ 			printf("baz");
++ 			break;
++ 		}
++ 		case quux:
++ printf("But don't break the indentation of this instruction\n");
++ break;
++ 	}
++ }
++ 
++ STARTTEST
++ :set cino&
+  2kdd=][
+  ENDTEST
+  
+*** ../vim-7.3.248/src/testdir/test3.ok	2011-06-12 21:51:01.000000000 +0200
+--- src/testdir/test3.ok	2011-07-15 14:03:41.000000000 +0200
+***************
+*** 1310,1315 ****
+--- 1310,1340 ----
+  
+  void func(void)
+  {
++ 	int tab[] =
++ 	{
++ 		1, 2, 3,
++ 		4, 5, 6};
++ 
++ 	printf("Indent this line correctly!\n");
++ 
++ 	switch (foo)
++ 	{
++ 		case bar:
++ 			printf("bar");
++ 			break;
++ 		case baz: {
++ 			printf("baz");
++ 			break;
++ 		}
++ 		case quux:
++ 			printf("But don't break the indentation of this instruction\n");
++ 			break;
++ 	}
++ }
++ 
++ 
++ void func(void)
++ {
+  	cout << "a"
+  		<< "b"
+  		<< ") :"
+*** ../vim-7.3.248/src/version.c	2011-07-15 13:51:57.000000000 +0200
+--- src/version.c	2011-07-15 14:12:05.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     249,
+  /**/
+
+-- 
+   GALAHAD hurries to the door and pushes through it.  As he leaves the room
+   we CUT TO the reverse to show that he is now in a room full of bathing
+   and romping GIRLIES, all innocent, wide-eyed and beautiful.  They smile
+   enchantingly at him as he tries to keep walking without being diverted by
+   the lovely sights assaulting his eyeballs.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.250 b/source/ap/vim/patches/7.3.250
new file mode 100644
index 00000000..fc33328b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.250
@@ -0,0 +1,104 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.250
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.250
+Problem:    Python: Errors in Unicode characters not handled nicely.
+Solution:   Add the surrogateescape error handler. (lilydjwg)
+Files:	    src/if_python3.c
+
+
+*** ../vim-7.3.249/src/if_python3.c	2011-06-26 19:13:33.000000000 +0200
+--- src/if_python3.c	2011-07-15 15:50:01.000000000 +0200
+***************
+*** 68,76 ****
+  
+  static void init_structs(void);
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, NULL);
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+--- 68,83 ----
+  
+  static void init_structs(void);
+  
++ /* The "surrogateescape" error handler is new in Python 3.1 */
++ #if PY_VERSION_HEX >= 0x030100f0
++ # define CODEC_ERROR_HANDLER "surrogateescape"
++ #else
++ # define CODEC_ERROR_HANDLER NULL
++ #endif
++ 
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, CODEC_ERROR_HANDLER);
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+***************
+*** 661,668 ****
+  
+      /* PyRun_SimpleString expects a UTF-8 string. Wrong encoding may cause
+       * SyntaxError (unicode error). */
+!     cmdstr = PyUnicode_Decode(cmd, strlen(cmd), (char *)ENC_OPT, NULL);
+!     cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", NULL);
+      Py_XDECREF(cmdstr);
+      PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+      Py_XDECREF(cmdbytes);
+--- 668,676 ----
+  
+      /* PyRun_SimpleString expects a UTF-8 string. Wrong encoding may cause
+       * SyntaxError (unicode error). */
+!     cmdstr = PyUnicode_Decode(cmd, strlen(cmd),
+! 					(char *)ENC_OPT, CODEC_ERROR_HANDLER);
+!     cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", CODEC_ERROR_HANDLER);
+      Py_XDECREF(cmdstr);
+      PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+      Py_XDECREF(cmdbytes);
+***************
+*** 1463,1469 ****
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_Decode(tmp, len, (char *)ENC_OPT, NULL);
+  
+      vim_free(tmp);
+      return result;
+--- 1471,1477 ----
+      }
+      *p = '\0';
+  
+!     result = PyUnicode_Decode(tmp, len, (char *)ENC_OPT, CODEC_ERROR_HANDLER);
+  
+      vim_free(tmp);
+      return result;
+*** ../vim-7.3.249/src/version.c	2011-07-15 14:12:25.000000000 +0200
+--- src/version.c	2011-07-15 15:46:19.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     250,
+  /**/
+
+-- 
+DINGO:   You must spank her well and after you have spanked her you
+         may deal with her as you like and then ... spank me.
+AMAZING: And spank me!
+STUNNER: And me.
+LOVELY:  And me.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.251 b/source/ap/vim/patches/7.3.251
new file mode 100644
index 00000000..43aa4148
--- /dev/null
+++ b/source/ap/vim/patches/7.3.251
@@ -0,0 +1,184 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.251
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.251
+Problem:    "gH<Del>" deletes the current line, except when it's the last
+	    line.
+Solution:   Set the "include" flag to indicate the last line is to be deleted.
+Files:	    src/normal.c, src/ops.c
+
+
+*** ../vim-7.3.250/src/normal.c	2011-07-07 15:08:53.000000000 +0200
+--- src/normal.c	2011-07-15 16:53:12.000000000 +0200
+***************
+*** 1795,1811 ****
+  		{
+  		    oap->inclusive = FALSE;
+  		    /* Try to include the newline, unless it's an operator
+! 		     * that works on lines only */
+! 		    if (*p_sel != 'o'
+! 			    && !op_on_lines(oap->op_type)
+! 			    && oap->end.lnum < curbuf->b_ml.ml_line_count)
+  		    {
+! 			++oap->end.lnum;
+! 			oap->end.col = 0;
+  # ifdef FEAT_VIRTUALEDIT
+! 			oap->end.coladd = 0;
+  # endif
+! 			++oap->line_count;
+  		    }
+  		}
+  	    }
+--- 1795,1819 ----
+  		{
+  		    oap->inclusive = FALSE;
+  		    /* Try to include the newline, unless it's an operator
+! 		     * that works on lines only. */
+! 		    if (*p_sel != 'o' && !op_on_lines(oap->op_type))
+  		    {
+! 			if (oap->end.lnum < curbuf->b_ml.ml_line_count)
+! 			{
+! 			    ++oap->end.lnum;
+! 			    oap->end.col = 0;
+  # ifdef FEAT_VIRTUALEDIT
+! 			    oap->end.coladd = 0;
+  # endif
+! 			    ++oap->line_count;
+! 			}
+! 			else
+! 			{
+! 			    /* Cannot move below the last line, make the op
+! 			     * inclusive to tell the operation to include the
+! 			     * line break. */
+! 			    oap->inclusive = TRUE;
+! 			}
+  		    }
+  		}
+  	    }
+*** ../vim-7.3.250/src/ops.c	2011-06-19 01:14:22.000000000 +0200
+--- src/ops.c	2011-07-15 17:28:28.000000000 +0200
+***************
+*** 1650,1656 ****
+  	    && oap->line_count > 1
+  	    && oap->op_type == OP_DELETE)
+      {
+! 	ptr = ml_get(oap->end.lnum) + oap->end.col + oap->inclusive;
+  	ptr = skipwhite(ptr);
+  	if (*ptr == NUL && inindent(0))
+  	    oap->motion_type = MLINE;
+--- 1650,1658 ----
+  	    && oap->line_count > 1
+  	    && oap->op_type == OP_DELETE)
+      {
+! 	ptr = ml_get(oap->end.lnum) + oap->end.col;
+! 	if (*ptr != NUL)
+! 	    ptr += oap->inclusive;
+  	ptr = skipwhite(ptr);
+  	if (*ptr == NUL && inindent(0))
+  	    oap->motion_type = MLINE;
+***************
+*** 1920,1930 ****
+  		    curwin->w_cursor.coladd = 0;
+  	    }
+  #endif
+! 	    (void)del_bytes((long)n, !virtual_op, oap->op_type == OP_DELETE
+  #ifdef FEAT_VISUAL
+  				    && !oap->is_VIsual
+  #endif
+  							);
+  	}
+  	else				/* delete characters between lines */
+  	{
+--- 1922,1941 ----
+  		    curwin->w_cursor.coladd = 0;
+  	    }
+  #endif
+! 	    if (oap->inclusive && oap->end.lnum == curbuf->b_ml.ml_line_count
+! 		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+! 	    {
+! 		/* Special case: gH<Del> deletes the last line. */
+! 		del_lines(1L, FALSE);
+! 	    }
+! 	    else
+! 	    {
+! 		(void)del_bytes((long)n, !virtual_op, oap->op_type == OP_DELETE
+  #ifdef FEAT_VISUAL
+  				    && !oap->is_VIsual
+  #endif
+  							);
++ 	    }
+  	}
+  	else				/* delete characters between lines */
+  	{
+***************
+*** 1941,1957 ****
+  	    ++curwin->w_cursor.lnum;
+  	    del_lines((long)(oap->line_count - 2), FALSE);
+  
+! 	    /* delete from start of line until op_end */
+! 	    curwin->w_cursor.col = 0;
+! 	    (void)del_bytes((long)(oap->end.col + 1 - !oap->inclusive),
+! 					!virtual_op, oap->op_type == OP_DELETE
+  #ifdef FEAT_VISUAL
+  					&& !oap->is_VIsual
+  #endif
+  							    );
+! 	    curwin->w_cursor = curpos;		/* restore curwin->w_cursor */
+! 
+! 	    (void)do_join(2, FALSE, FALSE);
+  	}
+      }
+  
+--- 1952,1980 ----
+  	    ++curwin->w_cursor.lnum;
+  	    del_lines((long)(oap->line_count - 2), FALSE);
+  
+! 	    n = (oap->end.col + 1 - !oap->inclusive);
+! 	    if (oap->inclusive && oap->end.lnum == curbuf->b_ml.ml_line_count
+! 		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+! 	    {
+! 		/* Special case: gH<Del> deletes the last line. */
+! 		del_lines(1L, FALSE);
+! 		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+! 		if (curwin->w_cursor.lnum > 1)
+! 		    --curwin->w_cursor.lnum;
+! 	    }
+! 	    else
+! 	    {
+! 		/* delete from start of line until op_end */
+! 		curwin->w_cursor.col = 0;
+! 		(void)del_bytes((long)n, !virtual_op, oap->op_type == OP_DELETE
+  #ifdef FEAT_VISUAL
+  					&& !oap->is_VIsual
+  #endif
+  							    );
+! 		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+! 	    }
+! 	    if (curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
+! 		(void)do_join(2, FALSE, FALSE);
+  	}
+      }
+  
+*** ../vim-7.3.250/src/version.c	2011-07-15 15:54:39.000000000 +0200
+--- src/version.c	2011-07-15 17:35:18.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     251,
+  /**/
+
+-- 
+            ### Hiroshima 45, Chernobyl 86, Windows 95 ###
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.252 b/source/ap/vim/patches/7.3.252
new file mode 100644
index 00000000..e24b73be
--- /dev/null
+++ b/source/ap/vim/patches/7.3.252
@@ -0,0 +1,43 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.252
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.252 (after 7.3.247)
+Problem:    Tests fail. (David Northfield)
+Solution:   Add missing update for .ok file.
+Files:      src/testdir/test81.ok
+
+
+*** ../vim-7.3.251/src/testdir/test81.ok	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/test81.ok	2011-07-15 13:14:27.000000000 +0200
+***************
+*** 1,4 ****
+--- 1,6 ----
+  aaa two
++     z
++ y
+  bbb y
+  ccc
+  ddd yee y
+*** ../vim-7.3.251/src/version.c	2011-07-15 17:51:30.000000000 +0200
+--- src/version.c	2011-07-15 17:55:25.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     252,
+  /**/
+
+-- 
+You cannot propel yourself forward by patting yourself on the back.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.253 b/source/ap/vim/patches/7.3.253
new file mode 100644
index 00000000..70e415b5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.253
@@ -0,0 +1,539 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.253
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.253
+Problem:    "echo 'abc' > ''" returns 0 or 1, depending on 'ignorecase'.
+	    Checks in mb_strnicmp() for illegal and truncated bytes are
+	    wrong.  Should not assume that byte length is equal before case
+	    folding.
+Solution:   Add utf_safe_read_char_adv() and utf_strnicmp(). Add a test for
+	    this. (Ivan Krasilnikov)
+Files:	    src/mbyte.c src/testdir/test82.in, src/testdir/test82.ok,
+	    src/testdir/Makefile, src/testdir/Make_amiga.mak,
+	    src/testdir/Make_dos.mak, src/testdir/Make_ming.mak,
+	    src/testdir/Make_os2.mak, src/testdir/Make_vms.mms
+
+
+*** ../vim-7.3.252/src/mbyte.c	2011-07-07 15:08:53.000000000 +0200
+--- src/mbyte.c	2011-07-15 20:13:52.000000000 +0200
+***************
+*** 132,137 ****
+--- 132,138 ----
+  static int dbcs_char2cells __ARGS((int c));
+  static int dbcs_ptr2cells_len __ARGS((char_u *p, int size));
+  static int dbcs_ptr2char __ARGS((char_u *p));
++ static int utf_safe_read_char_adv __ARGS((char_u **s, size_t *n));
+  
+  /*
+   * Lookup table to quickly get the length in bytes of a UTF-8 character from
+***************
+*** 1701,1706 ****
+--- 1702,1767 ----
+  }
+  
+  /*
++  * Convert a UTF-8 byte sequence to a wide character.
++  * String is assumed to be terminated by NUL or after "n" bytes, whichever
++  * comes first.
++  * The function is safe in the sense that it never accesses memory beyond the
++  * first "n" bytes of "s".
++  *
++  * On success, returns decoded codepoint, advances "s" to the beginning of
++  * next character and decreases "n" accordingly.
++  *
++  * If end of string was reached, returns 0 and, if "n" > 0, advances "s" past
++  * NUL byte.
++  *
++  * If byte sequence is illegal or incomplete, returns -1 and does not advance
++  * "s".
++  */
++     static int
++ utf_safe_read_char_adv(s, n)
++     char_u      **s;
++     size_t      *n;
++ {
++     int		c, k;
++ 
++     if (*n == 0) /* end of buffer */
++ 	return 0;
++ 
++     k = utf8len_tab_zero[**s];
++ 
++     if (k == 1)
++     {
++ 	/* ASCII character or NUL */
++ 	(*n)--;
++ 	return *(*s)++;
++     }
++ 
++     if ((size_t)k <= *n)
++     {
++ 	/* We have a multibyte sequence and it isn't truncated by buffer
++ 	 * limits so utf_ptr2char() is safe to use. Or the first byte is
++ 	 * illegal (k=0), and it's also safe to use utf_ptr2char(). */
++ 	c = utf_ptr2char(*s);
++ 
++ 	/* On failure, utf_ptr2char() returns the first byte, so here we
++ 	 * check equality with the first byte. The only non-ASCII character
++ 	 * which equals the first byte of its own UTF-8 representation is
++ 	 * U+00C3 (UTF-8: 0xC3 0x83), so need to check that special case too.
++ 	 * It's safe even if n=1, else we would have k=2 > n. */
++ 	if (c != (int)(**s) || (c == 0xC3 && (*s)[1] == 0x83))
++ 	{
++ 	    /* byte sequence was successfully decoded */
++ 	    *s += k;
++ 	    *n -= k;
++ 	    return c;
++ 	}
++     }
++ 
++     /* byte sequence is incomplete or illegal */
++     return -1;
++ }
++ 
++ /*
+   * Get character at **pp and advance *pp to the next character.
+   * Note: composing characters are skipped!
+   */
+***************
+*** 2667,2673 ****
+  	{0x10400,0x10427,1,40}
+  };
+  
+! static int utf_convert(int a, convertStruct table[], int tableSize);
+  
+  /*
+   * Generic conversion function for case operations.
+--- 2728,2735 ----
+  	{0x10400,0x10427,1,40}
+  };
+  
+! static int utf_convert __ARGS((int a, convertStruct table[], int tableSize));
+! static int utf_strnicmp __ARGS((char_u *s1, char_u *s2, size_t n1, size_t n2));
+  
+  /*
+   * Generic conversion function for case operations.
+***************
+*** 3079,3084 ****
+--- 3141,3220 ----
+      return (utf_tolower(a) != a);
+  }
+  
++     static int
++ utf_strnicmp(s1, s2, n1, n2)
++     char_u      *s1, *s2;
++     size_t      n1, n2;
++ {
++     int		c1, c2, cdiff;
++     char_u	buffer[6];
++ 
++     for (;;)
++     {
++ 	c1 = utf_safe_read_char_adv(&s1, &n1);
++ 	c2 = utf_safe_read_char_adv(&s2, &n2);
++ 
++ 	if (c1 <= 0 || c2 <= 0)
++ 	    break;
++ 
++ 	if (c1 == c2)
++ 	    continue;
++ 
++ 	cdiff = utf_fold(c1) - utf_fold(c2);
++ 	if (cdiff != 0)
++ 	    return cdiff;
++     }
++ 
++     /* some string ended or has an incomplete/illegal character sequence */
++ 
++     if (c1 == 0 || c2 == 0)
++     {
++ 	/* some string ended. shorter string is smaller */
++ 	if (c1 == 0 && c2 == 0)
++ 	    return 0;
++ 	return c1 == 0 ? -1 : 1;
++     }
++ 
++     /* Continue with bytewise comparison to produce some result that
++      * would make comparison operations involving this function transitive.
++      *
++      * If only one string had an error, comparison should be made with
++      * folded version of the other string. In this case it is enough
++      * to fold just one character to determine the result of comparison. */
++ 
++     if (c1 != -1 && c2 == -1)
++     {
++ 	n1 = utf_char2bytes(utf_fold(c1), buffer);
++ 	s1 = buffer;
++     }
++     else if (c2 != -1 && c1 == -1)
++     {
++ 	n2 = utf_char2bytes(utf_fold(c2), buffer);
++ 	s2 = buffer;
++     }
++ 
++     while (n1 > 0 && n2 > 0 && *s1 != NUL && *s2 != NUL)
++     {
++ 	cdiff = (int)(*s1) - (int)(*s2);
++ 	if (cdiff != 0)
++ 	    return cdiff;
++ 
++ 	s1++;
++ 	s2++;
++ 	n1--;
++ 	n2--;
++     }
++ 
++     if (n1 > 0 && *s1 == NUL)
++ 	n1 = 0;
++     if (n2 > 0 && *s2 == NUL)
++ 	n2 = 0;
++ 
++     if (n1 == 0 && n2 == 0)
++ 	return 0;
++     return n1 == 0 ? -1 : 1;
++ }
++ 
+  /*
+   * Version of strnicmp() that handles multi-byte characters.
+   * Needed for Big5, Sjift-JIS and UTF-8 encoding.  Other DBCS encodings can
+***************
+*** 3092,3140 ****
+      char_u	*s1, *s2;
+      size_t	nn;
+  {
+!     int		i, j, l;
+      int		cdiff;
+-     int		incomplete = FALSE;
+      int		n = (int)nn;
+  
+!     for (i = 0; i < n; i += l)
+      {
+! 	if (s1[i] == NUL && s2[i] == NUL)   /* both strings end */
+! 	    return 0;
+! 	if (enc_utf8)
+! 	{
+! 	    l = utf_byte2len(s1[i]);
+! 	    if (l > n - i)
+! 	    {
+! 		l = n - i;		    /* incomplete character */
+! 		incomplete = TRUE;
+! 	    }
+! 	    /* Check directly first, it's faster. */
+! 	    for (j = 0; j < l; ++j)
+! 	    {
+! 		if (s1[i + j] != s2[i + j])
+! 		    break;
+! 		if (s1[i + j] == 0)
+! 		    /* Both stings have the same bytes but are incomplete or
+! 		     * have illegal bytes, accept them as equal. */
+! 		    l = j;
+! 	    }
+! 	    if (j < l)
+! 	    {
+! 		/* If one of the two characters is incomplete return -1. */
+! 		if (incomplete || i + utf_byte2len(s2[i]) > n)
+! 		    return -1;
+! 		/* Don't case-fold illegal bytes or truncated characters. */
+! 		if (utf_ptr2len(s1 + i) < l || utf_ptr2len(s2 + i) < l)
+! 		    return -1;
+! 		cdiff = utf_fold(utf_ptr2char(s1 + i))
+! 					     - utf_fold(utf_ptr2char(s2 + i));
+! 		if (cdiff != 0)
+! 		    return cdiff;
+! 	    }
+! 	}
+! 	else
+  	{
+  	    l = (*mb_ptr2len)(s1 + i);
+  	    if (l <= 1)
+  	    {
+--- 3228,3248 ----
+      char_u	*s1, *s2;
+      size_t	nn;
+  {
+!     int		i, l;
+      int		cdiff;
+      int		n = (int)nn;
+  
+!     if (enc_utf8)
+      {
+! 	return utf_strnicmp(s1, s2, nn, nn);
+!     }
+!     else
+!     {
+! 	for (i = 0; i < n; i += l)
+  	{
++ 	    if (s1[i] == NUL && s2[i] == NUL)	/* both strings end */
++ 		return 0;
++ 
+  	    l = (*mb_ptr2len)(s1 + i);
+  	    if (l <= 1)
+  	    {
+*** ../vim-7.3.252/src/testdir/test82.in	2011-07-15 21:16:03.000000000 +0200
+--- src/testdir/test82.in	2011-07-15 18:22:46.000000000 +0200
+***************
+*** 0 ****
+--- 1,93 ----
++ Tests for case-insensitive UTF-8 comparisons (utf_strnicmp() in mbyte.c)
++ 
++ STARTTEST
++ :so small.vim
++ :if !has("multi_byte")
++ : e! test.ok
++ : w! test.out
++ : qa!
++ :endif
++ :set enc=utf8
++ ggdG
++ :
++ :function! Ch(a, op, b, expected)
++ :  if eval(printf('"%s" %s "%s"', a:a, a:op, a:b)) != a:expected
++ :    call append(line('$'), printf('"%s" %s "%s" should return %d', a:a, a:op, a:b, a:expected))
++ :  else
++ :    let b:passed += 1
++ :  endif
++ :endfunction
++ :
++ :function! Chk(a, b, result)
++ :  if a:result == 0
++ :    call Ch(a:a, '==?', a:b, 1)
++ :    call Ch(a:a, '!=?', a:b, 0)
++ :    call Ch(a:a, '<=?', a:b, 1)
++ :    call Ch(a:a, '>=?', a:b, 1)
++ :    call Ch(a:a, '<?', a:b, 0)
++ :    call Ch(a:a, '>?', a:b, 0)
++ :  elseif a:result > 0
++ :    call Ch(a:a, '==?', a:b, 0)
++ :    call Ch(a:a, '!=?', a:b, 1)
++ :    call Ch(a:a, '<=?', a:b, 0)
++ :    call Ch(a:a, '>=?', a:b, 1)
++ :    call Ch(a:a, '<?', a:b, 0)
++ :    call Ch(a:a, '>?', a:b, 1)
++ :  else
++ :    call Ch(a:a, '==?', a:b, 0)
++ :    call Ch(a:a, '!=?', a:b, 1)
++ :    call Ch(a:a, '<=?', a:b, 1)
++ :    call Ch(a:a, '>=?', a:b, 0)
++ :    call Ch(a:a, '<?', a:b, 1)
++ :    call Ch(a:a, '>?', a:b, 0)
++ :  endif
++ :endfunction
++ :
++ :function! Check(a, b, result)
++ :  call Chk(a:a, a:b, a:result)
++ :  call Chk(a:b, a:a, -a:result)
++ :endfunction
++ :
++ :function! LT(a, b)
++ :  call Check(a:a, a:b, -1)
++ :endfunction
++ :
++ :function! GT(a, b)
++ :  call Check(a:a, a:b, 1)
++ :endfunction
++ :
++ :function! EQ(a, b)
++ :  call Check(a:a, a:b, 0)
++ :endfunction
++ :
++ :let b:passed=0
++ :call EQ('', '')
++ :call LT('', 'a')
++ :call EQ('abc', 'abc')
++ :call EQ('Abc', 'abC')
++ :call LT('ab', 'abc')
++ :call LT('AB', 'abc')
++ :call LT('ab', 'aBc')
++ :call EQ('\xd0\xb9\xd1\x86\xd1\x83\xd0\xba\xd0\xb5\xd0\xbd', '\xd0\xb9\xd0\xa6\xd0\xa3\xd0\xba\xd0\x95\xd0\xbd')
++ :call LT('\xd0\xb9\xd1\x86\xd1\x83\xd0\xba\xd0\xb5\xd0\xbd', '\xd0\xaf\xd1\x86\xd1\x83\xd0\xba\xd0\xb5\xd0\xbd')
++ :call EQ('\xe2\x84\xaa', 'k')
++ :call LT('\xe2\x84\xaa', 'kkkkkk')
++ :call EQ('\xe2\x84\xaa\xe2\x84\xaa\xe2\x84\xaa', 'kkk')
++ :call LT('kk', '\xe2\x84\xaa\xe2\x84\xaa\xe2\x84\xaa')
++ :call EQ('\xe2\x84\xaa\xe2\x84\xa6k\xe2\x84\xaak\xcf\x89', 'k\xcf\x89\xe2\x84\xaakk\xe2\x84\xa6')
++ :call EQ('Abc\x80', 'AbC\x80')
++ :call LT('Abc\x80', 'AbC\x81')
++ :call LT('Abc', 'AbC\x80')
++ :call LT('abc\x80DEF', 'abc\x80def')  " case folding stops at the first bad character
++ :call LT('\xc3XYZ', '\xc3xyz')
++ :call EQ('\xef\xbc\xba', '\xef\xbd\x9a')  " FF3A (upper), FF5A (lower)
++ :call GT('\xef\xbc\xba', '\xef\xbc\xff')  " first string is ok and equals \xef\xbd\x9a after folding, second string is illegal and was left unchanged, then the strings were bytewise compared
++ :call LT('\xc3', '\xc3\x83')
++ :call EQ('\xc3\xa3xYz', '\xc3\x83XyZ')
++ :for n in range(0x60, 0xFF) | call LT(printf('xYz\x%.2X', n-1), printf('XyZ\x%.2X', n)) | endfor
++ :for n in range(0x80, 0xBF) | call EQ(printf('xYz\xc2\x%.2XUvW', n), printf('XyZ\xc2\x%.2XuVw', n)) | endfor
++ :for n in range(0xC0, 0xFF) | call LT(printf('xYz\xc2\x%.2XUvW', n), printf('XyZ\xc2\x%.2XuVw', n)) | endfor
++ :call append(0, printf('%d checks passed', b:passed))
++ :wq! test.out
++ ENDTEST
++ 
+*** ../vim-7.3.252/src/testdir/test82.ok	2011-07-15 21:16:03.000000000 +0200
+--- src/testdir/test82.ok	2011-07-15 18:37:33.000000000 +0200
+***************
+*** 0 ****
+--- 1,2 ----
++ 3732 checks passed
++ 
+*** ../vim-7.3.252/src/testdir/Makefile	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Makefile	2011-07-15 18:30:08.000000000 +0200
+***************
+*** 26,32 ****
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 26,32 ----
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS_GUI = test16.out
+  
+*** ../vim-7.3.252/src/testdir/Make_amiga.mak	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Make_amiga.mak	2011-07-15 18:29:50.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out
+  
+  .SUFFIXES: .in .out
+  
+***************
+*** 130,132 ****
+--- 130,133 ----
+  test79.out: test79.in
+  test80.out: test80.in
+  test81.out: test81.in
++ test82.out: test82.in
+*** ../vim-7.3.252/src/testdir/Make_dos.mak	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Make_dos.mak	2011-07-15 18:30:02.000000000 +0200
+***************
+*** 29,35 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 29,35 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.252/src/testdir/Make_ming.mak	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Make_ming.mak	2011-07-15 18:30:15.000000000 +0200
+***************
+*** 49,55 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 49,55 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.252/src/testdir/Make_os2.mak	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Make_os2.mak	2011-07-15 18:30:25.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out
+  
+  .SUFFIXES: .in .out
+  
+*** ../vim-7.3.252/src/testdir/Make_vms.mms	2011-06-26 05:36:07.000000000 +0200
+--- src/testdir/Make_vms.mms	2011-07-15 18:30:33.000000000 +0200
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jun 26
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jul 15
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 75,81 ****
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out test78.out test79.out test80.out test81.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 75,82 ----
+  	 test61.out test62.out test63.out test64.out test65.out \
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+! 	 test77.out test78.out test79.out test80.out test81.out \
+! 	 test82.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.252/src/version.c	2011-07-15 17:56:11.000000000 +0200
+--- src/version.c	2011-07-15 21:12:26.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     253,
+  /**/
+
+-- 
+"Intelligence has much less practical application than you'd think."
+		  -- Scott Adams, Dilbert.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.254 b/source/ap/vim/patches/7.3.254
new file mode 100644
index 00000000..85176a7a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.254
@@ -0,0 +1,47 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.254
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.254
+Problem:    The coladd field is not reset when setting the line number for a
+	    ":call" command.
+Solution:   Reset it.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.253/src/eval.c	2011-07-07 17:36:52.000000000 +0200
+--- src/eval.c	2011-07-07 17:51:42.000000000 +0200
+***************
+*** 3430,3435 ****
+--- 3430,3438 ----
+  	{
+  	    curwin->w_cursor.lnum = lnum;
+  	    curwin->w_cursor.col = 0;
++ #ifdef FEAT_VIRTUALEDIT
++ 	    curwin->w_cursor.coladd = 0;
++ #endif
+  	}
+  	arg = startarg;
+  	if (get_func_tv(name, (int)STRLEN(name), &rettv, &arg,
+*** ../vim-7.3.253/src/version.c	2011-07-15 21:16:54.000000000 +0200
+--- src/version.c	2011-07-15 21:23:16.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     254,
+  /**/
+
+-- 
+Eight Megabytes And Continually Swapping.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.255 b/source/ap/vim/patches/7.3.255
new file mode 100644
index 00000000..c01a585e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.255
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.255
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.255
+Problem:    When editing a file such as "File[2010-08-15].vim" an E16 error is
+	    given. (Manuel Stol)
+Solution:   Don't give an error for failing to compile the regexp.
+Files:	    src/ex_docmd.c, src/misc1.c, src/vim.h
+
+
+*** ../vim-7.3.254/src/ex_docmd.c	2011-06-13 01:19:48.000000000 +0200
+--- src/ex_docmd.c	2011-07-20 14:48:01.000000000 +0200
+***************
+*** 7069,7075 ****
+  	old_arg_count = GARGCOUNT;
+  	if (expand_wildcards(old_arg_count, old_arg_files,
+  		    &new_arg_file_count, &new_arg_files,
+! 		    EW_FILE|EW_NOTFOUND|EW_ADDSLASH) == OK
+  		&& new_arg_file_count > 0)
+  	{
+  	    alist_set(&global_alist, new_arg_file_count, new_arg_files,
+--- 7069,7075 ----
+  	old_arg_count = GARGCOUNT;
+  	if (expand_wildcards(old_arg_count, old_arg_files,
+  		    &new_arg_file_count, &new_arg_files,
+! 		    EW_FILE|EW_NOTFOUND|EW_ADDSLASH|EW_NOERROR) == OK
+  		&& new_arg_file_count > 0)
+  	{
+  	    alist_set(&global_alist, new_arg_file_count, new_arg_files,
+*** ../vim-7.3.254/src/misc1.c	2011-07-15 14:12:25.000000000 +0200
+--- src/misc1.c	2011-07-20 14:55:09.000000000 +0200
+***************
+*** 9043,9050 ****
+--- 9043,9054 ----
+      }
+  
+      /* compile the regexp into a program */
++     if (flags & EW_NOERROR)
++ 	++emsg_silent;
+      regmatch.rm_ic = TRUE;		/* Always ignore case */
+      regmatch.regprog = vim_regcomp(pat, RE_MAGIC);
++     if (flags & EW_NOERROR)
++ 	--emsg_silent;
+      vim_free(pat);
+  
+      if (regmatch.regprog == NULL)
+*** ../vim-7.3.254/src/vim.h	2011-06-13 02:03:55.000000000 +0200
+--- src/vim.h	2011-07-20 14:50:13.000000000 +0200
+***************
+*** 815,820 ****
+--- 815,821 ----
+  #define EW_EXEC		0x40	/* executable files */
+  #define EW_PATH		0x80	/* search in 'path' too */
+  #define EW_ICASE	0x100	/* ignore case */
++ #define EW_NOERROR	0x200	/* no error for bad regexp */
+  /* Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND
+   * is used when executing commands and EW_SILENT for interactive expanding. */
+  
+*** ../vim-7.3.254/src/version.c	2011-07-15 21:24:06.000000000 +0200
+--- src/version.c	2011-07-20 15:03:52.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     255,
+  /**/
+
+-- 
+Not too long ago, a program was something you watched on TV...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.256 b/source/ap/vim/patches/7.3.256
new file mode 100644
index 00000000..b8c9f00d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.256
@@ -0,0 +1,322 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.256
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.256
+Problem:    Javascript indenting not sufficiently tested.
+Solution:   Add more tests. (Luc Deschenaux)  Mark the lines that are indented
+	    wrong.
+Files:	    src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.255/src/testdir/test3.in	2011-07-15 14:12:25.000000000 +0200
+--- src/testdir/test3.in	2011-07-15 21:05:49.000000000 +0200
+***************
+*** 1592,1598 ****
+  
+  
+  STARTTEST
+! :set cino=J1
+  /^JSSTART
+  =/^JSEND
+  ENDTEST
+--- 1592,1598 ----
+  
+  
+  STARTTEST
+! :set cino=j1,J1
+  /^JSSTART
+  =/^JSEND
+  ENDTEST
+***************
+*** 1613,1618 ****
+--- 1613,1757 ----
+  JSEND
+  
+  STARTTEST
++ :set cino=j1,J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ var foo = [
++ 1,  // indent 8 more
++ 2,
++ 3
++ ];  // indent 8 less
++ JSEND
++ 
++ STARTTEST
++ :set cino=j1,J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ function bar() {
++ var foo = [
++ 1,
++ 2,
++ 3
++ ];  // indent 16 less
++ }
++ JSEND
++ 
++ STARTTEST
++ :set cino=j1,J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ (function($){
++ 
++ var class_name='myclass';
++ 
++ function private_method() {
++ }
++ 
++ var public_method={
++ method: function(options,args){
++ private_method();
++ }
++ }
++ 
++ function init(options) {
++ 
++ $(this).data(class_name+'_public',$.extend({},{
++ foo: 'bar',
++ bar: 2,  // indent 8 more
++ foobar: [  // indent 8 more
++ 1,  // indent 8 more
++ 2,  // indent 16 more
++ 3   // indent 16 more
++ ],
++ callback: function(){  // indent 8 more
++ return true;  // indent 8 more
++ }  // indent 8 more
++ }, options||{}));
++ }
++ 
++ $.fn[class_name]=function() {
++ 
++ var _arguments=arguments;
++ return this.each(function(){
++ 
++ var options=$(this).data(class_name+'_public');
++ if (!options) {
++ init.apply(this,_arguments);
++ 
++ } else {
++ var method=public_method[_arguments[0]];
++ 
++ if (typeof(method)!='function') {
++ console.log(class_name+' has no method "'+_arguments[0]+'"');
++ return false;
++ }
++ _arguments[0]=options;
++ method.apply(this,_arguments);
++ }
++ });
++ }
++ 
++ })(jQuery);
++ JSEND
++ 
++ STARTTEST
++ :set cino=j1,J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ function init(options) {
++ $(this).data(class_name+'_public',$.extend({},{
++ foo: 'bar',
++ bar: 2,
++ foobar: [
++ 1,  // indent 8 more
++ 2,  // indent 8 more
++ 3   // indent 8 more
++ ],
++ callback: function(){
++ return true;
++ }
++ }, options||{}));
++ }
++ JSEND
++ 
++ STARTTEST
++ :set cino=j1,J1
++ /^JSSTART
++ =/^JSEND
++ ENDTEST
++ 
++ JSSTART
++ (function($){
++ function init(options) {
++ $(this).data(class_name+'_public',$.extend({},{
++ foo: 'bar',
++ bar: 2,  // indent 8 more
++ foobar: [  // indent 8 more
++ 1,  // indent 8 more
++ 2,  // indent 16 more
++ 3  // indent 16 more
++ ],
++ callback: function(){  // indent 8 more
++ return true;  // indent 8 more
++ }  // indent 8 more
++ }, options||{}));
++ }
++ })(jQuery);
++ JSEND
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/start of AUTO/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.255/src/testdir/test3.ok	2011-07-15 14:12:25.000000000 +0200
+--- src/testdir/test3.ok	2011-07-15 21:06:38.000000000 +0200
+***************
+*** 1443,1445 ****
+--- 1443,1559 ----
+  }
+  JSEND
+  
++ 
++ JSSTART
++ var foo = [
++ 1,  // indent 8 more
++ 	2,
++ 	3
++ 	];  // indent 8 less
++ JSEND
++ 
++ 
++ JSSTART
++ function bar() {
++ 	var foo = [
++ 		1,
++ 		2,
++ 		3
++ 			];  // indent 16 less
++ }
++ JSEND
++ 
++ 
++ JSSTART
++ (function($){
++ 
++ 	var class_name='myclass';
++ 
++ 	function private_method() {
++ 	}
++ 
++ 	var public_method={
++ 		method: function(options,args){
++ 			private_method();
++ 		}
++ 	}
++ 
++ 	function init(options) {
++ 
++ 		$(this).data(class_name+'_public',$.extend({},{
++ 			foo: 'bar',
++ 		bar: 2,  // indent 8 more
++ 		foobar: [  // indent 8 more
++ 			1,  // indent 8 more
++ 		2,  // indent 16 more
++ 		3   // indent 16 more
++ 			],
++ 		callback: function(){  // indent 8 more
++ 			return true;  // indent 8 more
++ 		}  // indent 8 more
++ 		}, options||{}));
++ 	}
++ 
++ 	$.fn[class_name]=function() {
++ 
++ 		var _arguments=arguments;
++ 		return this.each(function(){
++ 
++ 			var options=$(this).data(class_name+'_public');
++ 			if (!options) {
++ 				init.apply(this,_arguments);
++ 
++ 			} else {
++ 				var method=public_method[_arguments[0]];
++ 
++ 				if (typeof(method)!='function') {
++ 					console.log(class_name+' has no method "'+_arguments[0]+'"');
++ 					return false;
++ 				}
++ 				_arguments[0]=options;
++ 				method.apply(this,_arguments);
++ 			}
++ 		});
++ 	}
++ 
++ })(jQuery);
++ JSEND
++ 
++ 
++ JSSTART
++ function init(options) {
++ 	$(this).data(class_name+'_public',$.extend({},{
++ 		foo: 'bar',
++ 		bar: 2,
++ 		foobar: [
++ 		1,  // indent 8 more
++ 		2,  // indent 8 more
++ 		3   // indent 8 more
++ 		],
++ 		callback: function(){
++ 			return true;
++ 		}
++ 	}, options||{}));
++ }
++ JSEND
++ 
++ 
++ JSSTART
++ (function($){
++ 	function init(options) {
++ 		$(this).data(class_name+'_public',$.extend({},{
++ 			foo: 'bar',
++ 		bar: 2,  // indent 8 more
++ 		foobar: [  // indent 8 more
++ 			1,  // indent 8 more
++ 		2,  // indent 16 more
++ 		3  // indent 16 more
++ 			],
++ 		callback: function(){  // indent 8 more
++ 			return true;  // indent 8 more
++ 		}  // indent 8 more
++ 		}, options||{}));
++ 	}
++ })(jQuery);
++ JSEND
++ 
+*** ../vim-7.3.255/src/version.c	2011-07-20 15:04:52.000000000 +0200
+--- src/version.c	2011-07-20 15:08:13.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     256,
+  /**/
+
+-- 
+Not too long ago, a keyboard was something to make music with...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.257 b/source/ap/vim/patches/7.3.257
new file mode 100644
index 00000000..f6292bf8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.257
@@ -0,0 +1,97 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.257
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.257
+Problem:    Not all completions are available to user commands.
+Solution:   Add "color", "compiler", "file_in_path" and "locale". (Dominique
+	    Pelle)
+Files:	    src/ex_docmd.c, runtime/doc/map.txt
+
+
+*** ../vim-7.3.256/src/ex_docmd.c	2011-07-20 15:04:52.000000000 +0200
+--- src/ex_docmd.c	2011-07-20 16:10:28.000000000 +0200
+***************
+*** 5297,5303 ****
+--- 5297,5305 ----
+  {
+      {EXPAND_AUGROUP, "augroup"},
+      {EXPAND_BUFFERS, "buffer"},
++     {EXPAND_COLORS, "color"},
+      {EXPAND_COMMANDS, "command"},
++     {EXPAND_COMPILER, "compiler"},
+  #if defined(FEAT_CSCOPE)
+      {EXPAND_CSCOPE, "cscope"},
+  #endif
+***************
+*** 5310,5319 ****
+--- 5312,5326 ----
+      {EXPAND_EVENTS, "event"},
+      {EXPAND_EXPRESSION, "expression"},
+      {EXPAND_FILES, "file"},
++     {EXPAND_FILES_IN_PATH, "file_in_path"},
+      {EXPAND_FILETYPE, "filetype"},
+      {EXPAND_FUNCTIONS, "function"},
+      {EXPAND_HELP, "help"},
+      {EXPAND_HIGHLIGHT, "highlight"},
++ #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
++         && (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
++     {EXPAND_LOCALES, "locale"},
++ #endif
+      {EXPAND_MAPPINGS, "mapping"},
+      {EXPAND_MENUS, "menu"},
+      {EXPAND_OWNSYNTAX, "syntax"},
+*** ../vim-7.3.256/runtime/doc/map.txt	2011-05-19 17:25:36.000000000 +0200
+--- runtime/doc/map.txt	2011-07-20 16:10:28.000000000 +0200
+***************
+*** 1202,1221 ****
+--- 1211,1236 ----
+  
+  	-complete=augroup	autocmd groups
+  	-complete=buffer	buffer names
++ 	-complete=color		color schemes
+  	-complete=command	Ex command (and arguments)
++ 	-complete=compiler	compilers
++ 	-complete=cscope	|:cscope| suboptions
+  	-complete=dir		directory names
+  	-complete=environment	environment variable names
+  	-complete=event		autocommand events
+  	-complete=expression	Vim expression
+  	-complete=file		file and directory names
++ 	-complete=file_in_path	file and directory names in |'path'|
+  	-complete=filetype	filetype names |'filetype'|
+  	-complete=function	function name
+  	-complete=help		help subjects
+  	-complete=highlight	highlight groups
++ 	-complete=locale	locale names (as output of locale -a)
+  	-complete=mapping	mapping name
+  	-complete=menu		menus
+  	-complete=option	options
+  	-complete=shellcmd	Shell command
++ 	-complete=sign		|:sign| suboptions
+  	-complete=syntax	syntax file names |'syntax'|
+  	-complete=tag		tags
+  	-complete=tag_listfiles	tags, file names are shown when CTRL-D is hit
+*** ../vim-7.3.256/src/version.c	2011-07-20 15:09:38.000000000 +0200
+--- src/version.c	2011-07-20 16:30:31.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     257,
+  /**/
+
+-- 
+I have to exercise early in the morning before my brain
+figures out what I'm doing.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.258 b/source/ap/vim/patches/7.3.258
new file mode 100644
index 00000000..277cbe77
--- /dev/null
+++ b/source/ap/vim/patches/7.3.258
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.258
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.258
+Problem:    MS-Windows: The edit with existing vim context menu entries can be
+	    unwanted.
+Solution:   Let a registry entry disable them. (Jerome Vuarand)
+Files:	    src/GvimExt/gvimext.cpp
+
+
+*** ../vim-7.3.257/src/GvimExt/gvimext.cpp	2010-08-15 21:57:29.000000000 +0200
+--- src/GvimExt/gvimext.cpp	2011-07-20 16:48:09.000000000 +0200
+***************
+*** 586,593 ****
+  
+      // Initialize m_cntOfHWnd to 0
+      m_cntOfHWnd = 0;
+!     // Retrieve all the vim instances
+!     EnumWindows(EnumWindowsProc, (LPARAM)this);
+  
+      if (cbFiles > 1)
+      {
+--- 586,608 ----
+  
+      // Initialize m_cntOfHWnd to 0
+      m_cntOfHWnd = 0;
+! 
+!     HKEY keyhandle;
+!     bool showExisting = true;
+! 
+!     // Check whether "Edit with existing Vim" entries are disabled.
+!     if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, "Software\\Vim\\Gvim", 0,
+! 				       KEY_READ, &keyhandle) == ERROR_SUCCESS)
+!     {
+! 	if (RegQueryValueEx(keyhandle, "DisableEditWithExisting", 0, NULL,
+! 						 NULL, NULL) == ERROR_SUCCESS)
+! 	    showExisting = false;
+! 	RegCloseKey(keyhandle);
+!     }
+! 
+!     // Retrieve all the vim instances, unless disabled.
+!     if (showExisting)
+! 	EnumWindows(EnumWindowsProc, (LPARAM)this);
+  
+      if (cbFiles > 1)
+      {
+*** ../vim-7.3.257/src/version.c	2011-07-20 16:36:35.000000000 +0200
+--- src/version.c	2011-07-20 16:54:34.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     258,
+  /**/
+
+-- 
+What the word 'politics' means: 'Poli' in Latin meaning 'many' and 'tics'
+meaning 'bloodsucking creatures'.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.259 b/source/ap/vim/patches/7.3.259
new file mode 100644
index 00000000..91f9dfa1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.259
@@ -0,0 +1,503 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.259
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.259
+Problem:    Equivalence classes only work for latin characters.
+Solution:   Add the Unicode equivalence characters. (Dominique Pelle)
+Files:	    runtime/doc/pattern.txt, src/regexp.c, src/testdir/test44.in,
+	    src/testdir/test44.ok
+
+
+*** ../vim-7.3.258/runtime/doc/pattern.txt	2010-08-15 21:57:14.000000000 +0200
+--- runtime/doc/pattern.txt	2011-07-20 17:44:03.000000000 +0200
+***************
+*** 1027,1037 ****
+  	  These items only work for 8-bit characters.
+  							*/[[=* *[==]*
+  	- An equivalence class.  This means that characters are matched that
+! 	  have almost the same meaning, e.g., when ignoring accents.  The form
+! 	  is:
+  		[=a=]
+- 	  Currently this is only implemented for latin1.  Also works for the
+- 	  latin1 characters in utf-8 and latin9.
+  							*/[[.* *[..]*
+  	- A collation element.  This currently simply accepts a single
+  	  character in the form:
+--- 1036,1044 ----
+  	  These items only work for 8-bit characters.
+  							*/[[=* *[==]*
+  	- An equivalence class.  This means that characters are matched that
+! 	  have almost the same meaning, e.g., when ignoring accents.  This
+! 	  only works for Unicode, latin1 and latin9.  The form is:
+  		[=a=]
+  							*/[[.* *[..]*
+  	- A collation element.  This currently simply accepts a single
+  	  character in the form:
+*** ../vim-7.3.258/src/regexp.c	2011-06-19 04:31:54.000000000 +0200
+--- src/regexp.c	2011-07-20 17:56:52.000000000 +0200
+***************
+*** 666,673 ****
+--- 666,677 ----
+  static void	regc __ARGS((int b));
+  #ifdef FEAT_MBYTE
+  static void	regmbc __ARGS((int c));
++ # define REGMBC(x) regmbc(x);
++ # define CASEMBC(x) case x:
+  #else
+  # define regmbc(c) regc(c)
++ # define REGMBC(x)
++ # define CASEMBC(x)
+  #endif
+  static void	reginsert __ARGS((int, char_u *));
+  static void	reginsert_limits __ARGS((int, long, long, char_u *));
+***************
+*** 787,854 ****
+  	switch (c)
+  	{
+  	    case 'A': case '\300': case '\301': case '\302':
+  	    case '\303': case '\304': case '\305':
+  		      regmbc('A'); regmbc('\300'); regmbc('\301');
+  		      regmbc('\302'); regmbc('\303'); regmbc('\304');
+  		      regmbc('\305');
+  		      return;
+  	    case 'C': case '\307':
+  		      regmbc('C'); regmbc('\307');
+  		      return;
+  	    case 'E': case '\310': case '\311': case '\312': case '\313':
+  		      regmbc('E'); regmbc('\310'); regmbc('\311');
+  		      regmbc('\312'); regmbc('\313');
+  		      return;
+  	    case 'I': case '\314': case '\315': case '\316': case '\317':
+  		      regmbc('I'); regmbc('\314'); regmbc('\315');
+  		      regmbc('\316'); regmbc('\317');
+  		      return;
+  	    case 'N': case '\321':
+  		      regmbc('N'); regmbc('\321');
+  		      return;
+  	    case 'O': case '\322': case '\323': case '\324': case '\325':
+! 	    case '\326':
+  		      regmbc('O'); regmbc('\322'); regmbc('\323');
+  		      regmbc('\324'); regmbc('\325'); regmbc('\326');
+  		      return;
+  	    case 'U': case '\331': case '\332': case '\333': case '\334':
+  		      regmbc('U'); regmbc('\331'); regmbc('\332');
+  		      regmbc('\333'); regmbc('\334');
+  		      return;
+  	    case 'Y': case '\335':
+  		      regmbc('Y'); regmbc('\335');
+  		      return;
+  	    case 'a': case '\340': case '\341': case '\342':
+  	    case '\343': case '\344': case '\345':
+  		      regmbc('a'); regmbc('\340'); regmbc('\341');
+  		      regmbc('\342'); regmbc('\343'); regmbc('\344');
+  		      regmbc('\345');
+  		      return;
+  	    case 'c': case '\347':
+  		      regmbc('c'); regmbc('\347');
+  		      return;
+  	    case 'e': case '\350': case '\351': case '\352': case '\353':
+  		      regmbc('e'); regmbc('\350'); regmbc('\351');
+  		      regmbc('\352'); regmbc('\353');
+  		      return;
+  	    case 'i': case '\354': case '\355': case '\356': case '\357':
+  		      regmbc('i'); regmbc('\354'); regmbc('\355');
+  		      regmbc('\356'); regmbc('\357');
+  		      return;
+  	    case 'n': case '\361':
+  		      regmbc('n'); regmbc('\361');
+  		      return;
+  	    case 'o': case '\362': case '\363': case '\364': case '\365':
+! 	    case '\366':
+  		      regmbc('o'); regmbc('\362'); regmbc('\363');
+  		      regmbc('\364'); regmbc('\365'); regmbc('\366');
+  		      return;
+  	    case 'u': case '\371': case '\372': case '\373': case '\374':
+  		      regmbc('u'); regmbc('\371'); regmbc('\372');
+  		      regmbc('\373'); regmbc('\374');
+  		      return;
+  	    case 'y': case '\375': case '\377':
+  		      regmbc('y'); regmbc('\375'); regmbc('\377');
+  		      return;
+  	}
+  #endif
+--- 791,1085 ----
+  	switch (c)
+  	{
+  	    case 'A': case '\300': case '\301': case '\302':
++ 	    CASEMBC(0x100) CASEMBC(0x102) CASEMBC(0x104) CASEMBC(0x1cd)
++ 	    CASEMBC(0x1de) CASEMBC(0x1e0) CASEMBC(0x1ea2)
+  	    case '\303': case '\304': case '\305':
+  		      regmbc('A'); regmbc('\300'); regmbc('\301');
+  		      regmbc('\302'); regmbc('\303'); regmbc('\304');
+  		      regmbc('\305');
++ 		      REGMBC(0x100) REGMBC(0x102) REGMBC(0x104)
++ 		      REGMBC(0x1cd) REGMBC(0x1de) REGMBC(0x1e0)
++ 		      REGMBC(0x1ea2)
++ 		      return;
++ 	    case 'B': CASEMBC(0x1e02) CASEMBC(0x1e06)
++ 		      regmbc('B'); REGMBC(0x1e02) REGMBC(0x1e06)
+  		      return;
+  	    case 'C': case '\307':
++ 	    CASEMBC(0x106) CASEMBC(0x108) CASEMBC(0x10a) CASEMBC(0x10c)
+  		      regmbc('C'); regmbc('\307');
++ 		      REGMBC(0x106) REGMBC(0x108) REGMBC(0x10a)
++ 		      REGMBC(0x10c)
++ 		      return;
++ 	    case 'D': CASEMBC(0x10e) CASEMBC(0x110) CASEMBC(0x1e0a)
++ 	    CASEMBC(0x1e0e) CASEMBC(0x1e10)
++ 		      regmbc('D'); REGMBC(0x10e) REGMBC(0x110)
++ 		      REGMBC(0x1e0a) REGMBC(0x1e0e) REGMBC(0x1e10)
+  		      return;
+  	    case 'E': case '\310': case '\311': case '\312': case '\313':
++ 	    CASEMBC(0x112) CASEMBC(0x114) CASEMBC(0x116) CASEMBC(0x118)
++ 	    CASEMBC(0x11a) CASEMBC(0x1eba) CASEMBC(0x1ebc)
+  		      regmbc('E'); regmbc('\310'); regmbc('\311');
+  		      regmbc('\312'); regmbc('\313');
++ 		      REGMBC(0x112) REGMBC(0x114) REGMBC(0x116)
++ 		      REGMBC(0x118) REGMBC(0x11a) REGMBC(0x1eba)
++ 		      REGMBC(0x1ebc)
++ 		      return;
++ 	    case 'F': CASEMBC(0x1e1e)
++ 		      regmbc('F'); REGMBC(0x1e1e)
++ 		      return;
++ 	    case 'G': CASEMBC(0x11c) CASEMBC(0x11e) CASEMBC(0x120)
++ 	    CASEMBC(0x122) CASEMBC(0x1e4) CASEMBC(0x1e6) CASEMBC(0x1f4)
++ 	    CASEMBC(0x1e20)
++ 		      regmbc('G'); REGMBC(0x11c) REGMBC(0x11e)
++ 		      REGMBC(0x120) REGMBC(0x122) REGMBC(0x1e4)
++ 		      REGMBC(0x1e6) REGMBC(0x1f4) REGMBC(0x1e20)
++ 		      return;
++ 	    case 'H': CASEMBC(0x124) CASEMBC(0x126) CASEMBC(0x1e22)
++ 	    CASEMBC(0x1e26) CASEMBC(0x1e28)
++ 		      regmbc('H'); REGMBC(0x124) REGMBC(0x126)
++ 		      REGMBC(0x1e22) REGMBC(0x1e26) REGMBC(0x1e28)
+  		      return;
+  	    case 'I': case '\314': case '\315': case '\316': case '\317':
++ 	    CASEMBC(0x128) CASEMBC(0x12a) CASEMBC(0x12c) CASEMBC(0x12e)
++ 	    CASEMBC(0x130) CASEMBC(0x1cf) CASEMBC(0x1ec8)
+  		      regmbc('I'); regmbc('\314'); regmbc('\315');
+  		      regmbc('\316'); regmbc('\317');
++ 		      REGMBC(0x128) REGMBC(0x12a) REGMBC(0x12c)
++ 		      REGMBC(0x12e) REGMBC(0x130) REGMBC(0x1cf)
++ 		      REGMBC(0x1ec8)
++ 		      return;
++ 	    case 'J': CASEMBC(0x134)
++ 		      regmbc('J'); REGMBC(0x134)
++ 		      return;
++ 	    case 'K': CASEMBC(0x136) CASEMBC(0x1e8) CASEMBC(0x1e30)
++ 	    CASEMBC(0x1e34)
++ 		      regmbc('K'); REGMBC(0x136) REGMBC(0x1e8)
++ 		      REGMBC(0x1e30) REGMBC(0x1e34)
++ 		      return;
++ 	    case 'L': CASEMBC(0x139) CASEMBC(0x13b) CASEMBC(0x13d)
++ 	    CASEMBC(0x13f) CASEMBC(0x141) CASEMBC(0x1e3a)
++ 		      regmbc('L'); REGMBC(0x139) REGMBC(0x13b)
++ 		      REGMBC(0x13d) REGMBC(0x13f) REGMBC(0x141)
++ 		      REGMBC(0x1e3a)
++ 		      return;
++ 	    case 'M': CASEMBC(0x1e3e) CASEMBC(0x1e40)
++ 		      regmbc('M'); REGMBC(0x1e3e) REGMBC(0x1e40)
+  		      return;
+  	    case 'N': case '\321':
++ 	    CASEMBC(0x143) CASEMBC(0x145) CASEMBC(0x147) CASEMBC(0x1e44)
++ 	    CASEMBC(0x1e48)
+  		      regmbc('N'); regmbc('\321');
++ 		      REGMBC(0x143) REGMBC(0x145) REGMBC(0x147)
++ 		      REGMBC(0x1e44) REGMBC(0x1e48)
+  		      return;
+  	    case 'O': case '\322': case '\323': case '\324': case '\325':
+! 	    case '\326': case '\330':
+! 	    CASEMBC(0x14c) CASEMBC(0x14e) CASEMBC(0x150) CASEMBC(0x1a0)
+! 	    CASEMBC(0x1d1) CASEMBC(0x1ea) CASEMBC(0x1ec) CASEMBC(0x1ece)
+  		      regmbc('O'); regmbc('\322'); regmbc('\323');
+  		      regmbc('\324'); regmbc('\325'); regmbc('\326');
++ 		      regmbc('\330');
++ 		      REGMBC(0x14c) REGMBC(0x14e) REGMBC(0x150)
++ 		      REGMBC(0x1a0) REGMBC(0x1d1) REGMBC(0x1ea)
++ 		      REGMBC(0x1ec) REGMBC(0x1ece)
++ 		      return;
++ 	    case 'P': case 0x1e54: case 0x1e56:
++ 		      regmbc('P'); REGMBC(0x1e54) REGMBC(0x1e56)
++ 		      return;
++ 	    case 'R': CASEMBC(0x154) CASEMBC(0x156) CASEMBC(0x158)
++ 	    CASEMBC(0x1e58) CASEMBC(0x1e5e)
++ 		      regmbc('R'); REGMBC(0x154) REGMBC(0x156) REGMBC(0x158)
++ 		      REGMBC(0x1e58) REGMBC(0x1e5e)
++ 		      return;
++ 	    case 'S': CASEMBC(0x15a) CASEMBC(0x15c) CASEMBC(0x15e)
++ 	    CASEMBC(0x160) CASEMBC(0x1e60)
++ 		      regmbc('S'); REGMBC(0x15a) REGMBC(0x15c)
++ 		      REGMBC(0x15e) REGMBC(0x160) REGMBC(0x1e60)
++ 		      return;
++ 	    case 'T': CASEMBC(0x162) CASEMBC(0x164) CASEMBC(0x166)
++ 	    CASEMBC(0x1e6a) CASEMBC(0x1e6e)
++ 		      regmbc('T'); REGMBC(0x162) REGMBC(0x164)
++ 		      REGMBC(0x166) REGMBC(0x1e6a) REGMBC(0x1e6e)
+  		      return;
+  	    case 'U': case '\331': case '\332': case '\333': case '\334':
++ 	    CASEMBC(0x168) CASEMBC(0x16a) CASEMBC(0x16c) CASEMBC(0x16e)
++ 	    CASEMBC(0x170) CASEMBC(0x172) CASEMBC(0x1af) CASEMBC(0x1d3)
++ 	    CASEMBC(0x1ee6)
+  		      regmbc('U'); regmbc('\331'); regmbc('\332');
+  		      regmbc('\333'); regmbc('\334');
++ 		      REGMBC(0x168) REGMBC(0x16a) REGMBC(0x16c)
++ 		      REGMBC(0x16e) REGMBC(0x170) REGMBC(0x172)
++ 		      REGMBC(0x1af) REGMBC(0x1d3) REGMBC(0x1ee6)
++ 		      return;
++ 	    case 'V': CASEMBC(0x1e7c)
++ 		      regmbc('V'); REGMBC(0x1e7c)
++ 		      return;
++ 	    case 'W': CASEMBC(0x174) CASEMBC(0x1e80) CASEMBC(0x1e82)
++ 	    CASEMBC(0x1e84) CASEMBC(0x1e86)
++ 		      regmbc('W'); REGMBC(0x174) REGMBC(0x1e80)
++ 		      REGMBC(0x1e82) REGMBC(0x1e84) REGMBC(0x1e86)
++ 		      return;
++ 	    case 'X': CASEMBC(0x1e8a) CASEMBC(0x1e8c)
++ 		      regmbc('X'); REGMBC(0x1e8a) REGMBC(0x1e8c)
+  		      return;
+  	    case 'Y': case '\335':
++ 	    CASEMBC(0x176) CASEMBC(0x178) CASEMBC(0x1e8e) CASEMBC(0x1ef2)
++ 	    CASEMBC(0x1ef6) CASEMBC(0x1ef8)
+  		      regmbc('Y'); regmbc('\335');
++ 		      REGMBC(0x176) REGMBC(0x178) REGMBC(0x1e8e)
++ 		      REGMBC(0x1ef2) REGMBC(0x1ef6) REGMBC(0x1ef8)
++ 		      return;
++ 	    case 'Z': CASEMBC(0x179) CASEMBC(0x17b) CASEMBC(0x17d)
++ 	    CASEMBC(0x1b5) CASEMBC(0x1e90) CASEMBC(0x1e94)
++ 		      regmbc('Z'); REGMBC(0x179) REGMBC(0x17b)
++ 		      REGMBC(0x17d) REGMBC(0x1b5) REGMBC(0x1e90)
++ 		      REGMBC(0x1e94)
+  		      return;
+  	    case 'a': case '\340': case '\341': case '\342':
+  	    case '\343': case '\344': case '\345':
++ 	    CASEMBC(0x101) CASEMBC(0x103) CASEMBC(0x105) CASEMBC(0x1ce)
++ 	    CASEMBC(0x1df) CASEMBC(0x1e1) CASEMBC(0x1ea3)
+  		      regmbc('a'); regmbc('\340'); regmbc('\341');
+  		      regmbc('\342'); regmbc('\343'); regmbc('\344');
+  		      regmbc('\345');
++ 		      REGMBC(0x101) REGMBC(0x103) REGMBC(0x105)
++ 		      REGMBC(0x1ce) REGMBC(0x1df) REGMBC(0x1e1)
++ 		      REGMBC(0x1ea3)
++ 		      return;
++ 	    case 'b': CASEMBC(0x1e03) CASEMBC(0x1e07)
++ 		      regmbc('b'); REGMBC(0x1e03) REGMBC(0x1e07)
+  		      return;
+  	    case 'c': case '\347':
++ 	    CASEMBC(0x107) CASEMBC(0x109) CASEMBC(0x10b) CASEMBC(0x10d)
+  		      regmbc('c'); regmbc('\347');
++ 		      REGMBC(0x107) REGMBC(0x109) REGMBC(0x10b)
++ 		      REGMBC(0x10d)
++ 		      return;
++ 	    case 'd': CASEMBC(0x10f) CASEMBC(0x111) CASEMBC(0x1d0b)
++ 	    CASEMBC(0x1e11)
++ 		      regmbc('d'); REGMBC(0x10f) REGMBC(0x111)
++ 		      REGMBC(0x1e0b) REGMBC(0x01e0f) REGMBC(0x1e11)
+  		      return;
+  	    case 'e': case '\350': case '\351': case '\352': case '\353':
++ 	    CASEMBC(0x113) CASEMBC(0x115) CASEMBC(0x117) CASEMBC(0x119)
++ 	    CASEMBC(0x11b) CASEMBC(0x1ebb) CASEMBC(0x1ebd)
+  		      regmbc('e'); regmbc('\350'); regmbc('\351');
+  		      regmbc('\352'); regmbc('\353');
++ 		      REGMBC(0x113) REGMBC(0x115) REGMBC(0x117)
++ 		      REGMBC(0x119) REGMBC(0x11b) REGMBC(0x1ebb)
++ 		      REGMBC(0x1ebd)
++ 		      return;
++ 	    case 'f': CASEMBC(0x1e1f)
++ 		      regmbc('f'); REGMBC(0x1e1f)
++ 		      return;
++ 	    case 'g': CASEMBC(0x11d) CASEMBC(0x11f) CASEMBC(0x121)
++ 	    CASEMBC(0x123) CASEMBC(0x1e5) CASEMBC(0x1e7) CASEMBC(0x1f5)
++ 	    CASEMBC(0x1e21)
++ 		      regmbc('g'); REGMBC(0x11d) REGMBC(0x11f)
++ 		      REGMBC(0x121) REGMBC(0x123) REGMBC(0x1e5)
++ 		      REGMBC(0x1e7) REGMBC(0x1f5) REGMBC(0x1e21)
++ 		      return;
++ 	    case 'h': CASEMBC(0x125) CASEMBC(0x127) CASEMBC(0x1e23)
++ 	    CASEMBC(0x1e27) CASEMBC(0x1e29) CASEMBC(0x1e96)
++ 		      regmbc('h'); REGMBC(0x125) REGMBC(0x127)
++ 		      REGMBC(0x1e23) REGMBC(0x1e27) REGMBC(0x1e29)
++ 		      REGMBC(0x1e96)
+  		      return;
+  	    case 'i': case '\354': case '\355': case '\356': case '\357':
++ 	    CASEMBC(0x129) CASEMBC(0x12b) CASEMBC(0x12d) CASEMBC(0x12f)
++ 	    CASEMBC(0x1d0) CASEMBC(0x1ec9)
+  		      regmbc('i'); regmbc('\354'); regmbc('\355');
+  		      regmbc('\356'); regmbc('\357');
++ 		      REGMBC(0x129) REGMBC(0x12b) REGMBC(0x12d)
++ 		      REGMBC(0x12f) REGMBC(0x1d0) REGMBC(0x1ec9)
++ 		      return;
++ 	    case 'j': CASEMBC(0x135) CASEMBC(0x1f0)
++ 		      regmbc('j'); REGMBC(0x135) REGMBC(0x1f0)
++ 		      return;
++ 	    case 'k': CASEMBC(0x137) CASEMBC(0x1e9) CASEMBC(0x1e31)
++ 	    CASEMBC(0x1e35)
++ 		      regmbc('k'); REGMBC(0x137) REGMBC(0x1e9)
++ 		      REGMBC(0x1e31) REGMBC(0x1e35)
++ 		      return;
++ 	    case 'l': CASEMBC(0x13a) CASEMBC(0x13c) CASEMBC(0x13e)
++ 	    CASEMBC(0x140) CASEMBC(0x142) CASEMBC(0x1e3b)
++ 		      regmbc('l'); REGMBC(0x13a) REGMBC(0x13c)
++ 		      REGMBC(0x13e) REGMBC(0x140) REGMBC(0x142)
++ 		      REGMBC(0x1e3b)
++ 		      return;
++ 	    case 'm': CASEMBC(0x1e3f) CASEMBC(0x1e41)
++ 		      regmbc('m'); REGMBC(0x1e3f) REGMBC(0x1e41)
+  		      return;
+  	    case 'n': case '\361':
++ 	    CASEMBC(0x144) CASEMBC(0x146) CASEMBC(0x148) CASEMBC(0x149)
++ 	    CASEMBC(0x1e45) CASEMBC(0x1e49)
+  		      regmbc('n'); regmbc('\361');
++ 		      REGMBC(0x144) REGMBC(0x146) REGMBC(0x148)
++ 		      REGMBC(0x149) REGMBC(0x1e45) REGMBC(0x1e49)
+  		      return;
+  	    case 'o': case '\362': case '\363': case '\364': case '\365':
+! 	    case '\366': case '\370':
+! 	    CASEMBC(0x14d) CASEMBC(0x14f) CASEMBC(0x151) CASEMBC(0x1a1)
+! 	    CASEMBC(0x1d2) CASEMBC(0x1eb) CASEMBC(0x1ed) CASEMBC(0x1ecf)
+  		      regmbc('o'); regmbc('\362'); regmbc('\363');
+  		      regmbc('\364'); regmbc('\365'); regmbc('\366');
++ 		      regmbc('\370');
++ 		      REGMBC(0x14d) REGMBC(0x14f) REGMBC(0x151)
++ 		      REGMBC(0x1a1) REGMBC(0x1d2) REGMBC(0x1eb)
++ 		      REGMBC(0x1ed) REGMBC(0x1ecf)
++ 		      return;
++ 	    case 'p': CASEMBC(0x1e55) CASEMBC(0x1e57)
++ 		      regmbc('p'); REGMBC(0x1e55) REGMBC(0x1e57)
++ 		      return;
++ 	    case 'r': CASEMBC(0x155) CASEMBC(0x157) CASEMBC(0x159)
++ 	    CASEMBC(0x1e59) CASEMBC(0x1e5f)
++ 		      regmbc('r'); REGMBC(0x155) REGMBC(0x157) REGMBC(0x159)
++ 		      REGMBC(0x1e59) REGMBC(0x1e5f)
++ 		      return;
++ 	    case 's': CASEMBC(0x15b) CASEMBC(0x15d) CASEMBC(0x15f)
++ 	    CASEMBC(0x161) CASEMBC(0x1e61)
++ 		      regmbc('s'); REGMBC(0x15b) REGMBC(0x15d)
++ 		      REGMBC(0x15f) REGMBC(0x161) REGMBC(0x1e61)
++ 		      return;
++ 	    case 't': CASEMBC(0x163) CASEMBC(0x165) CASEMBC(0x167)
++ 	    CASEMBC(0x1e6b) CASEMBC(0x1e6f) CASEMBC(0x1e97)
++ 		      regmbc('t'); REGMBC(0x163) REGMBC(0x165) REGMBC(0x167)
++ 		      REGMBC(0x1e6b) REGMBC(0x1e6f) REGMBC(0x1e97)
+  		      return;
+  	    case 'u': case '\371': case '\372': case '\373': case '\374':
++ 	    CASEMBC(0x169) CASEMBC(0x16b) CASEMBC(0x16d) CASEMBC(0x16f)
++ 	    CASEMBC(0x171) CASEMBC(0x173) CASEMBC(0x1b0) CASEMBC(0x1d4)
++ 	    CASEMBC(0x1ee7)
+  		      regmbc('u'); regmbc('\371'); regmbc('\372');
+  		      regmbc('\373'); regmbc('\374');
++ 		      REGMBC(0x169) REGMBC(0x16b) REGMBC(0x16d)
++ 		      REGMBC(0x16f) REGMBC(0x171) REGMBC(0x173)
++ 		      REGMBC(0x1b0) REGMBC(0x1d4) REGMBC(0x1ee7)
++ 		      return;
++ 	    case 'v': CASEMBC(0x1e7d)
++ 		      regmbc('v'); REGMBC(0x1e7d)
++ 		      return;
++ 	    case 'w': CASEMBC(0x175) CASEMBC(0x1e81) CASEMBC(0x1e83)
++ 	    CASEMBC(0x1e85) CASEMBC(0x1e87) CASEMBC(0x1e98)
++ 		      regmbc('w'); REGMBC(0x175) REGMBC(0x1e81)
++ 		      REGMBC(0x1e83) REGMBC(0x1e85) REGMBC(0x1e87)
++ 		      REGMBC(0x1e98)
++ 		      return;
++ 	    case 'x': CASEMBC(0x1e8b) CASEMBC(0x1e8d)
++ 		      regmbc('x'); REGMBC(0x1e8b) REGMBC(0x1e8d)
+  		      return;
+  	    case 'y': case '\375': case '\377':
++ 	    CASEMBC(0x177) CASEMBC(0x1e8f) CASEMBC(0x1e99)
++ 	    CASEMBC(0x1ef3) CASEMBC(0x1ef7) CASEMBC(0x1ef9)
+  		      regmbc('y'); regmbc('\375'); regmbc('\377');
++ 		      REGMBC(0x177) REGMBC(0x1e8f) REGMBC(0x1e99)
++ 		      REGMBC(0x1ef3) REGMBC(0x1ef7) REGMBC(0x1ef9)
++ 		      return;
++ 	    case 'z': CASEMBC(0x17a) CASEMBC(0x17c) CASEMBC(0x17e)
++ 	    CASEMBC(0x1b6) CASEMBC(0x1e91) CASEMBC(0x1e95)
++ 		      regmbc('z'); REGMBC(0x17a) REGMBC(0x17c)
++ 		      REGMBC(0x17e) REGMBC(0x1b6) REGMBC(0x1e91)
++ 		      REGMBC(0x1e95)
+  		      return;
+  	}
+  #endif
+***************
+*** 2468,2473 ****
+--- 2699,2706 ----
+  regmbc(c)
+      int		c;
+  {
++     if (!has_mbyte && c > 0xff)
++ 	return;
+      if (regcode == JUST_CALC_SIZE)
+  	regsize += (*mb_char2len)(c);
+      else
+***************
+*** 2588,2594 ****
+      else
+  	offset = (int)(val - scan);
+      /* When the offset uses more than 16 bits it can no longer fit in the two
+!      * bytes avaliable.  Use a global flag to avoid having to check return
+       * values in too many places. */
+      if (offset > 0xffff)
+  	reg_toolong = TRUE;
+--- 2821,2827 ----
+      else
+  	offset = (int)(val - scan);
+      /* When the offset uses more than 16 bits it can no longer fit in the two
+!      * bytes available.  Use a global flag to avoid having to check return
+       * values in too many places. */
+      if (offset > 0xffff)
+  	reg_toolong = TRUE;
+*** ../vim-7.3.258/src/testdir/test44.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test44.in	2011-07-20 17:36:49.000000000 +0200
+***************
+*** 27,32 ****
+--- 27,34 ----
+  x/\%U12345678
+  x/[\U1234abcd\u1234\uabcd]
+  x/\%d21879b
++ x/ [[=A=]]* [[=B=]]* [[=C=]]* [[=D=]]* [[=E=]]* [[=F=]]* [[=G=]]* [[=H=]]* [[=I=]]* [[=J=]]* [[=K=]]* [[=L=]]* [[=M=]]* [[=N=]]* [[=O=]]* [[=P=]]* [[=Q=]]* [[=R=]]* [[=S=]]* [[=T=]]* [[=U=]]* [[=V=]]* [[=W=]]* [[=X=]]* [[=Y=]]* [[=Z=]]*/e
++ x/ [[=a=]]* [[=b=]]* [[=c=]]* [[=d=]]* [[=e=]]* [[=f=]]* [[=g=]]* [[=h=]]* [[=i=]]* [[=j=]]* [[=k=]]* [[=l=]]* [[=m=]]* [[=n=]]* [[=o=]]* [[=p=]]* [[=q=]]* [[=r=]]* [[=s=]]* [[=t=]]* [[=u=]]* [[=v=]]* [[=w=]]* [[=x=]]* [[=y=]]* [[=z=]]*/e
+  x:?^1?,$w! test.out
+  :e! test.out
+  G:put =matchstr(\"�בגד\", \".\", 0, 2) " ב
+***************
+*** 53,55 ****
+--- 55,59 ----
+  e ü’�…™¸y
+  f ü’�Š¯�z
+  g aå•·bb
++ h AÀ�ÂÃÄÅĀĂĄ�ǞǠẢ BḂḆ CÇĆĈĊČ DĎ�ḊḎ� EÈÉÊËĒĔĖĘĚẺẼ FḞ GĜĞĠĢǤǦǴḠ HĤĦḢḦḨ IÌ�Î�ĨĪĬĮİ�Ỉ JĴ KĶǨḰḴ LĹĻĽĿ�Ḻ MḾṀ NÑŃŅŇṄṈ OÒÓÔÕÖØŌŎ�ƠǑǪǬỎ PṔṖ Q RŔŖŘṘṞ SŚŜŞŠṠ TŢŤŦṪṮ UÙÚÛÜŨŪŬŮŰŲƯǓỦ VṼ WŴẀẂẄẆ XẊẌ Y�ŶŸẎỲỶỸ ZŹŻŽƵ�Ẕ
++ i aàáâãäå�ăąǎǟǡả bḃḇ cçćĉċ� d�đḋ�ḑ eèéêëēĕėęěẻẽ fḟ g�ğġģǥǧǵḡ hĥħḣḧḩẖ iìíîïĩīĭį�ỉ jĵǰ kķǩḱḵ lĺļľŀłḻ mḿ� nñńņňʼnṅṉ oòóôõöø��őơǒǫǭ� pṕṗ q rŕŗřṙṟ sś�şšṡ tţťŧṫṯẗ uùúûüũūŭůűųưǔủ vṽ wŵ�ẃẅẇẘ xẋ� yýÿŷ�ẙỳỷỹ zźżžƶẑẕ
+*** ../vim-7.3.258/src/testdir/test44.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test44.ok	2011-07-20 17:36:49.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,21 ----
+  e y
+  f z
+  g abb
++ h AÀ�ÂÃÄÅĀĂĄ�ǞǠẢ BḂḆ CÇĆĈĊČ DĎ�ḊḎ� EÈÉÊËĒĔĖĘĚẺẼ FḞ GĜĞĠĢǤǦǴḠ HĤĦḢḦḨ IÌ�Î�ĨĪĬĮİ�Ỉ JĴ KĶǨḰḴ LĹĻĽĿ�Ḻ MḾṀ NÑŃŅŇṄṈ OÒÓÔÕÖØŌŎ�ƠǑǪǬỎ PṔṖ Q RŔŖŘṘṞ SŚŜŞŠṠ TŢŤŦṪṮ UÙÚÛÜŨŪŬŮŰŲƯǓỦ VṼ WŴẀẂẄẆ XẊẌ Y�ŶŸẎỲỶỸ ZŹŻŽƵ�
++ i aàáâãäå�ăąǎǟǡả bḃḇ cçćĉċ� d�đḋ�ḑ eèéêëēĕėęěẻẽ fḟ g�ğġģǥǧǵḡ hĥħḣḧḩẖ iìíîïĩīĭį�ỉ jĵǰ kķǩḱḵ lĺļľŀłḻ mḿ� nñńņňʼnṅṉ oòóôõöø��őơǒǫǭ� pṕṗ q rŕŗřṙṟ sś�şšṡ tţťŧṫṯẗ uùúûüũūŭůűųưǔủ vṽ wŵ�ẃẅẇẘ xẋ� yýÿŷ�ẙỳỷỹ zźżžƶẑ
+  ב
+  בג
+  �
+*** ../vim-7.3.258/src/version.c	2011-07-20 17:27:17.000000000 +0200
+--- src/version.c	2011-07-20 17:38:32.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     259,
+  /**/
+
+-- 
+Not too long ago, compress was something you did to garbage...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.260 b/source/ap/vim/patches/7.3.260
new file mode 100644
index 00000000..ba9af57a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.260
@@ -0,0 +1,69 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.260
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.260
+Problem:    CursorHold triggers on an incomplete mapping. (Will Gray)
+Solution:   Don't trigger CursorHold when there is typeahead.
+Files:	    src/fileio.c
+
+
+*** ../vim-7.3.259/src/fileio.c	2011-05-19 17:25:36.000000000 +0200
+--- src/fileio.c	2011-07-20 18:22:16.000000000 +0200
+***************
+*** 9044,9050 ****
+  {
+      int		state;
+  
+!     if (!did_cursorhold && has_cursorhold() && !Recording
+  #ifdef FEAT_INS_EXPAND
+  	    && !ins_compl_active()
+  #endif
+--- 9044,9053 ----
+  {
+      int		state;
+  
+!     if (!did_cursorhold
+! 	    && has_cursorhold()
+! 	    && !Recording
+! 	    && typebuf.tb_len == 0
+  #ifdef FEAT_INS_EXPAND
+  	    && !ins_compl_active()
+  #endif
+***************
+*** 9935,9940 ****
+--- 9938,9945 ----
+  	    if ((c == ';' || c == '>') && match == FALSE)
+  	    {
+  		*pattern = NUL;	    /* Terminate the string */
++ 		/* TODO: match with 'filetype' of buffer that "fname" comes
++ 		 * from. */
+  		match = mch_check_filetype(fname, type_start);
+  		*pattern = c;	    /* Restore the terminator */
+  		type_start = pattern + 1;
+*** ../vim-7.3.259/src/version.c	2011-07-20 17:58:14.000000000 +0200
+--- src/version.c	2011-07-20 18:25:15.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     260,
+  /**/
+
+-- 
+LAUNCELOT: At last!   A call!  A cry of distress ...
+           (he draws his sword, and turns to CONCORDE)
+           Concorde!  Brave, Concorde ... you shall not have died in vain!
+CONCORDE:  I'm not quite dead, sir ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.261 b/source/ap/vim/patches/7.3.261
new file mode 100644
index 00000000..4c03f6b5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.261
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.261
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.261
+Problem:    G++ error message errornously recognized as error.
+Solution:   Ignore "In file included from" line also when it ends in a colon.
+	    (Fernando Castillo)
+Files:	    src/option.h
+
+
+*** ../vim-7.3.260/src/option.h	2011-06-26 05:36:07.000000000 +0200
+--- src/option.h	2011-07-27 13:44:08.000000000 +0200
+***************
+*** 33,39 ****
+  #     ifdef EBCDIC
+  #define DFLT_EFM	"%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     else
+! #define DFLT_EFM	"%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-Gfrom %f:%l:%c,%-Gfrom %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     endif
+  #    endif
+  #   endif
+--- 33,39 ----
+  #     ifdef EBCDIC
+  #define DFLT_EFM	"%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     else
+! #define DFLT_EFM	"%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c:,%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-Gfrom %f:%l:%c,%-Gfrom %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     endif
+  #    endif
+  #   endif
+*** ../vim-7.3.260/src/version.c	2011-07-20 18:29:33.000000000 +0200
+--- src/version.c	2011-07-27 13:46:23.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     261,
+  /**/
+
+-- 
+Have you heard about the new Barbie doll?  It's called Divorce
+Barbie.  It comes with all of Ken's stuff.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.262 b/source/ap/vim/patches/7.3.262
new file mode 100644
index 00000000..b3bd5cd8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.262
@@ -0,0 +1,1356 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.262
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.262
+Problem:    Photon code style doesn't match Vim style.
+Solution:   Clean up some of it.  (Elias Diem)
+Files:	    src/gui_photon.c
+
+
+*** ../vim-7.3.261/src/gui_photon.c	2011-01-17 20:08:03.000000000 +0100
+--- src/gui_photon.c	2011-07-27 14:07:02.000000000 +0200
+***************
+*** 32,40 ****
+  #endif
+  
+  #define ARRAY_LENGTH(a) (sizeof(a) / sizeof(a[0]))
+! #define RGB(r,g,b) PgRGB(r,g,b)
+  
+! #define EVENT_BUFFER_SIZE sizeof( PhEvent_t ) + 1000
+  
+  /* Some defines for gui_mch_mousehide() */
+  #define MOUSE_HIDE		TRUE
+--- 32,40 ----
+  #endif
+  
+  #define ARRAY_LENGTH(a) (sizeof(a) / sizeof(a[0]))
+! #define RGB(r, g, b) PgRGB(r, g, b)
+  
+! #define EVENT_BUFFER_SIZE sizeof(PhEvent_t) + 1000
+  
+  /* Some defines for gui_mch_mousehide() */
+  #define MOUSE_HIDE		TRUE
+***************
+*** 206,258 ****
+  static PtCallbackF_t gui_ph_handle_menu_unrealized;
+  
+  #ifdef USE_PANEL_GROUP
+! static void gui_ph_get_panelgroup_margins( short*, short*, short*, short* );
+  #endif
+  
+  #ifdef FEAT_TOOLBAR
+! static PhImage_t *gui_ph_toolbar_find_icon( vimmenu_T *menu );
+  #endif
+  
+! static void gui_ph_draw_start( void );
+! static void gui_ph_draw_end( void );
+  
+  /* Set the text for the balloon */
+! static PtWidget_t * gui_ph_show_tooltip( PtWidget_t *window,
+  			     PtWidget_t *widget,
+  			     int position,
+  			     char *text,
+  			     char *font,
+  			     PgColor_t fill_color,
+! 			     PgColor_t text_color );
+  
+  /****************************************************************************/
+  
+! static PtWidget_t * gui_ph_show_tooltip( PtWidget_t *window,
+  			     PtWidget_t *widget,
+  			     int position,
+  			     char *text,
+  			     char *font,
+  			     PgColor_t fill_color,
+! 			     PgColor_t text_color )
+  {
+      PtArg_t arg;
+      vimmenu_T *menu;
+      char_u  *tooltip;
+  
+!     PtSetArg( &arg, Pt_ARG_POINTER, &menu, 0 );
+!     PtGetResources( widget, 1, &arg );
+  
+      /* Override the text and position */
+  
+      tooltip = text;
+!     if( menu != NULL )
+      {
+  	int index = MENU_INDEX_TIP;
+! 	if( menu->strings[ index ] != NULL )
+  	    tooltip = menu->strings[ index ];
+      }
+  
+!     return( PtInflateBalloon(
+  	    window,
+  	    widget,
+  	    /* Don't put the balloon at the bottom,
+--- 206,258 ----
+  static PtCallbackF_t gui_ph_handle_menu_unrealized;
+  
+  #ifdef USE_PANEL_GROUP
+! static void gui_ph_get_panelgroup_margins(short*, short*, short*, short*);
+  #endif
+  
+  #ifdef FEAT_TOOLBAR
+! static PhImage_t *gui_ph_toolbar_find_icon(vimmenu_T *menu);
+  #endif
+  
+! static void gui_ph_draw_start(void);
+! static void gui_ph_draw_end(void);
+  
+  /* Set the text for the balloon */
+! static PtWidget_t * gui_ph_show_tooltip(PtWidget_t *window,
+  			     PtWidget_t *widget,
+  			     int position,
+  			     char *text,
+  			     char *font,
+  			     PgColor_t fill_color,
+! 			     PgColor_t text_color);
+  
+  /****************************************************************************/
+  
+! static PtWidget_t * gui_ph_show_tooltip(PtWidget_t *window,
+  			     PtWidget_t *widget,
+  			     int position,
+  			     char *text,
+  			     char *font,
+  			     PgColor_t fill_color,
+! 			     PgColor_t text_color)
+  {
+      PtArg_t arg;
+      vimmenu_T *menu;
+      char_u  *tooltip;
+  
+!     PtSetArg(&arg, Pt_ARG_POINTER, &menu, 0);
+!     PtGetResources(widget, 1, &arg);
+  
+      /* Override the text and position */
+  
+      tooltip = text;
+!     if (menu != NULL)
+      {
+  	int index = MENU_INDEX_TIP;
+! 	if (menu->strings[ index ] != NULL)
+  	    tooltip = menu->strings[ index ];
+      }
+  
+!     return PtInflateBalloon(
+  	    window,
+  	    widget,
+  	    /* Don't put the balloon at the bottom,
+***************
+*** 261,285 ****
+  	    tooltip,
+  	    font,
+  	    fill_color,
+! 	    text_color ) );
+  }
+  
+      static void
+! gui_ph_resize_container( void )
+  {
+      PhArea_t area;
+  
+!     PtWidgetArea( gui.vimWindow, &area );
+!     PtWidgetPos ( gui.vimContainer, &area.pos );
+  
+!     PtSetResource( gui.vimContainer, Pt_ARG_AREA, &area, 0 );
+  }
+  
+      static int
+  gui_ph_handle_menu_resize(
+  	PtWidget_t *widget,
+  	void *other,
+! 	PtCallbackInfo_t *info )
+  {
+      PtContainerCallback_t *sizes = info->cbdata;
+      PtWidget_t		*container;
+--- 261,285 ----
+  	    tooltip,
+  	    font,
+  	    fill_color,
+! 	    text_color);
+  }
+  
+      static void
+! gui_ph_resize_container(void)
+  {
+      PhArea_t area;
+  
+!     PtWidgetArea(gui.vimWindow, &area);
+!     PtWidgetPos (gui.vimContainer, &area.pos);
+  
+!     PtSetResource(gui.vimContainer, Pt_ARG_AREA, &area, 0);
+  }
+  
+      static int
+  gui_ph_handle_menu_resize(
+  	PtWidget_t *widget,
+  	void *other,
+! 	PtCallbackInfo_t *info)
+  {
+      PtContainerCallback_t *sizes = info->cbdata;
+      PtWidget_t		*container;
+***************
+*** 291,297 ****
+      /* Because vim treats the toolbar and menubar separately,
+       * and here they're lumped together into a PtToolbarGroup,
+       * we only need either menu_height or toolbar_height set at once */
+!     if( gui.menu_is_active )
+      {
+  	gui.menu_height = height;
+  	gui.toolbar_height = 0;
+--- 291,297 ----
+      /* Because vim treats the toolbar and menubar separately,
+       * and here they're lumped together into a PtToolbarGroup,
+       * we only need either menu_height or toolbar_height set at once */
+!     if (gui.menu_is_active)
+      {
+  	gui.menu_height = height;
+  	gui.toolbar_height = 0;
+***************
+*** 310,325 ****
+      container = gui.vimContainer;
+  #endif
+  
+!     PtSetResource( container, Pt_ARG_POS, &below_menu, 0 );
+  
+      gui_ph_resize_container();
+  
+  #ifdef USE_PANEL_GROUP
+      gui_ph_get_panelgroup_margins(
+  	    &pg_margin_top, &pg_margin_bottom,
+! 	    &pg_margin_left, &pg_margin_right );
+  #endif
+!     return( Pt_CONTINUE );
+  }
+  
+  /*
+--- 310,325 ----
+      container = gui.vimContainer;
+  #endif
+  
+!     PtSetResource(container, Pt_ARG_POS, &below_menu, 0);
+  
+      gui_ph_resize_container();
+  
+  #ifdef USE_PANEL_GROUP
+      gui_ph_get_panelgroup_margins(
+  	    &pg_margin_top, &pg_margin_bottom,
+! 	    &pg_margin_left, &pg_margin_right);
+  #endif
+!     return Pt_CONTINUE;
+  }
+  
+  /*
+***************
+*** 330,352 ****
+  gui_ph_handle_timer_cursor(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+!     if( blink_state == BLINK_ON )
+      {
+  	gui_undraw_cursor();
+  	blink_state = BLINK_OFF;
+! 	PtSetResource( gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_offtime, 0 );
+      }
+      else
+      {
+  	gui_update_cursor(TRUE, FALSE);
+  	blink_state = BLINK_ON;
+! 	PtSetResource( gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_ontime, 0 );
+      }
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 330,352 ----
+  gui_ph_handle_timer_cursor(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+!     if (blink_state == BLINK_ON)
+      {
+  	gui_undraw_cursor();
+  	blink_state = BLINK_OFF;
+! 	PtSetResource(gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_offtime, 0);
+      }
+      else
+      {
+  	gui_update_cursor(TRUE, FALSE);
+  	blink_state = BLINK_ON;
+! 	PtSetResource(gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_ontime, 0);
+      }
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 354,360 ****
+  {
+      is_timeout = TRUE;
+  
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 354,360 ----
+  {
+      is_timeout = TRUE;
+  
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 402,408 ****
+  	    break;
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 402,408 ----
+  	    break;
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 426,438 ****
+  
+  	    case Pt_SCROLL_SET:
+  		/* FIXME: return straight away here? */
+! 		return( Pt_CONTINUE );
+  		break;
+  	}
+  
+  	gui_drag_scrollbar(sb, value, dragging);
+      }
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 426,438 ----
+  
+  	    case Pt_SCROLL_SET:
+  		/* FIXME: return straight away here? */
+! 		return Pt_CONTINUE;
+  		break;
+  	}
+  
+  	gui_drag_scrollbar(sb, value, dragging);
+      }
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 453,459 ****
+      /* We're a good lil photon program, aren't we? yes we are, yeess wee arrr */
+      if( key->key_flags & Pk_KF_Compose )
+      {
+! 	return( Pt_CONTINUE );
+      }
+  
+      if( (key->key_flags & Pk_KF_Cap_Valid) &&
+--- 453,459 ----
+      /* We're a good lil photon program, aren't we? yes we are, yeess wee arrr */
+      if( key->key_flags & Pk_KF_Compose )
+      {
+! 	return Pt_CONTINUE;
+      }
+  
+      if( (key->key_flags & Pk_KF_Cap_Valid) &&
+***************
+*** 473,479 ****
+  		gui_is_menu_shortcut( key->key_cap ) ) ) )
+  	{
+  	    /* Fallthrough and let photon look for the hotkey */
+! 	    return( Pt_CONTINUE );
+  	}
+  #endif
+  
+--- 473,479 ----
+  		gui_is_menu_shortcut( key->key_cap ) ) ) )
+  	{
+  	    /* Fallthrough and let photon look for the hotkey */
+! 	    return Pt_CONTINUE;
+  	}
+  #endif
+  
+***************
+*** 544,550 ****
+  			add_to_input_buf( string, len );
+  		    }
+  
+! 		    return( Pt_CONSUME );
+  		}
+  		len = 0;
+  #endif
+--- 544,550 ----
+  			add_to_input_buf( string, len );
+  		    }
+  
+! 		    return Pt_CONSUME;
+  		}
+  		len = 0;
+  #endif
+***************
+*** 579,585 ****
+  		}
+  		else
+  		{
+! 		    return( Pt_CONTINUE );
+  		}
+  	    }
+  	    else
+--- 579,585 ----
+  		}
+  		else
+  		{
+! 		    return Pt_CONTINUE;
+  		}
+  	    }
+  	    else
+***************
+*** 622,632 ****
+  	if( len > 0 )
+  	{
+  	    add_to_input_buf( string, len );
+! 	    return( Pt_CONSUME );
+  	}
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 622,632 ----
+  	if( len > 0 )
+  	{
+  	    add_to_input_buf( string, len );
+! 	    return Pt_CONSUME;
+  	}
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 652,658 ****
+      if( info->event->type == Ph_EV_PTR_MOTION_NOBUTTON )
+      {
+  	gui_mouse_moved( mouse_x, mouse_y );
+! 	return( Pt_CONTINUE );
+      }
+  
+      if( pointer->key_mods & Pk_KM_Shift )
+--- 652,658 ----
+      if( info->event->type == Ph_EV_PTR_MOTION_NOBUTTON )
+      {
+  	gui_mouse_moved( mouse_x, mouse_y );
+! 	return Pt_CONTINUE;
+      }
+  
+      if( pointer->key_mods & Pk_KM_Shift )
+***************
+*** 702,708 ****
+  	gui_send_mouse_event( button , mouse_x, mouse_y, repeated_click, modifiers );
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  
+  /* Handle a focus change of the PtRaw widget */
+--- 702,708 ----
+  	gui_send_mouse_event( button , mouse_x, mouse_y, repeated_click, modifiers );
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  
+  /* Handle a focus change of the PtRaw widget */
+***************
+*** 721,727 ****
+  	PtAddEventHandler( gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+  		gui_ph_handle_mouse, NULL );
+      }
+!     return( Pt_CONTINUE );
+  }
+  
+      static void
+--- 721,727 ----
+  	PtAddEventHandler( gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+  		gui_ph_handle_mouse, NULL );
+      }
+!     return Pt_CONTINUE;
+  }
+  
+      static void
+***************
+*** 793,799 ****
+  	PtRealizeWidget( menu->submenu_id );
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  
+  /* This is used for pulldown/popup menus and also toolbar buttons */
+--- 793,799 ----
+  	PtRealizeWidget( menu->submenu_id );
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  
+  /* This is used for pulldown/popup menus and also toolbar buttons */
+***************
+*** 805,811 ****
+  	vimmenu_T *menu = (vimmenu_T *) data;
+  	gui_menu_cb( menu );
+      }
+!     return( Pt_CONTINUE );
+  }
+  
+  /* Stop focus from disappearing into the menubar... */
+--- 805,811 ----
+  	vimmenu_T *menu = (vimmenu_T *) data;
+  	gui_menu_cb( menu );
+      }
+!     return Pt_CONTINUE;
+  }
+  
+  /* Stop focus from disappearing into the menubar... */
+***************
+*** 816,822 ****
+  	PtCallbackInfo_t *info )
+  {
+      PtGiveFocus( gui.vimTextArea, NULL );
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 816,822 ----
+  	PtCallbackInfo_t *info )
+  {
+      PtGiveFocus( gui.vimTextArea, NULL );
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 826,832 ****
+  	PtCallbackInfo_t *info )
+  {
+      gui_set_shellsize( FALSE, TRUE, RESIZE_BOTH );
+!     return( Pt_CONTINUE );
+  }
+  
+  /****************************************************************************/
+--- 826,832 ----
+  	PtCallbackInfo_t *info )
+  {
+      gui_set_shellsize( FALSE, TRUE, RESIZE_BOTH );
+!     return Pt_CONTINUE;
+  }
+  
+  /****************************************************************************/
+***************
+*** 878,884 ****
+  		( STRCMP( items->dname, name ) != 0 ) )
+  	    items = items->next;
+      }
+!     return( items );
+  }
+  
+      static void
+--- 878,884 ----
+  		( STRCMP( items->dname, name ) != 0 ) )
+  	    items = items->next;
+      }
+!     return items;
+  }
+  
+      static void
+***************
+*** 927,933 ****
+  		gui_menu_cb( menu );
+  	}
+      }
+!     return( Pt_CONTINUE );
+  }
+  
+      static void
+--- 927,933 ----
+  		gui_menu_cb( menu );
+  	}
+      }
+!     return Pt_CONTINUE;
+  }
+  
+      static void
+***************
+*** 974,983 ****
+  		mark++;
+  
+  	    if( *mark == ')' )
+! 		return( TRUE);
+  	}
+      }
+!     return( FALSE );
+  }
+  
+      static void
+--- 974,983 ----
+  		mark++;
+  
+  	    if( *mark == ')' )
+! 		return TRUE;
+  	}
+      }
+!     return FALSE;
+  }
+  
+      static void
+***************
+*** 1057,1063 ****
+  	gui_ph_pg_remove_buffer( menu->dname );
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  #endif
+  
+--- 1057,1063 ----
+  	gui_ph_pg_remove_buffer( menu->dname );
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  #endif
+  
+***************
+*** 1071,1077 ****
+  	PtContainerHold( gui.vimContainer );
+      }
+  
+!     return( Pt_CONTINUE );
+  }
+  
+  /****************************************************************************/
+--- 1071,1077 ----
+  	PtContainerHold( gui.vimContainer );
+      }
+  
+!     return Pt_CONTINUE;
+  }
+  
+  /****************************************************************************/
+***************
+*** 1126,1132 ****
+  
+      gui.event_buffer = (PhEvent_t *) alloc( EVENT_BUFFER_SIZE );
+      if( gui.event_buffer == NULL )
+! 	return( FAIL );
+  
+      /* Get a translation so we can convert from ISO Latin-1 to UTF */
+      charset_translate = PxTranslateSet( NULL, "latin1" );
+--- 1126,1132 ----
+  
+      gui.event_buffer = (PhEvent_t *) alloc( EVENT_BUFFER_SIZE );
+      if( gui.event_buffer == NULL )
+! 	return FAIL;
+  
+      /* Get a translation so we can convert from ISO Latin-1 to UTF */
+      charset_translate = PxTranslateSet( NULL, "latin1" );
+***************
+*** 1141,1147 ****
+      PtSetArg( &args[ n++ ], Pt_ARG_DIM, &window_size, 0 );
+      gui.vimWindow = PtCreateWidget( PtWindow, NULL, n, args );
+      if( gui.vimWindow == NULL )
+! 	return( FAIL );
+  
+      PtAddCallback( gui.vimWindow, Pt_CB_WINDOW, gui_ph_handle_window_cb, NULL );
+      PtAddCallback( gui.vimWindow, Pt_CB_WINDOW_OPENING,
+--- 1141,1147 ----
+      PtSetArg( &args[ n++ ], Pt_ARG_DIM, &window_size, 0 );
+      gui.vimWindow = PtCreateWidget( PtWindow, NULL, n, args );
+      if( gui.vimWindow == NULL )
+! 	return FAIL;
+  
+      PtAddCallback( gui.vimWindow, Pt_CB_WINDOW, gui_ph_handle_window_cb, NULL );
+      PtAddCallback( gui.vimWindow, Pt_CB_WINDOW_OPENING,
+***************
+*** 1158,1164 ****
+  
+      gui.vimPanelGroup = PtCreateWidget( PtPanelGroup, gui.vimWindow, n, args );
+      if( gui.vimPanelGroup == NULL )
+! 	return( FAIL );
+  
+      PtAddCallback( gui.vimPanelGroup, Pt_CB_PG_PANEL_SWITCHING,
+  	    gui_ph_handle_pg_change, NULL );
+--- 1158,1164 ----
+  
+      gui.vimPanelGroup = PtCreateWidget( PtPanelGroup, gui.vimWindow, n, args );
+      if( gui.vimPanelGroup == NULL )
+! 	return FAIL;
+  
+      PtAddCallback( gui.vimPanelGroup, Pt_CB_PG_PANEL_SWITCHING,
+  	    gui_ph_handle_pg_change, NULL );
+***************
+*** 1172,1178 ****
+  
+      gui.vimContainer = PtCreateWidget( PtPane, gui.vimWindow, n, args );
+      if( gui.vimContainer == NULL )
+! 	return( FAIL );
+  
+      PtAddCallback( gui.vimContainer, Pt_CB_RESIZE, gui_ph_pane_resize, NULL );
+  #endif
+--- 1172,1178 ----
+  
+      gui.vimContainer = PtCreateWidget( PtPane, gui.vimWindow, n, args );
+      if( gui.vimContainer == NULL )
+! 	return FAIL;
+  
+      PtAddCallback( gui.vimContainer, Pt_CB_RESIZE, gui_ph_pane_resize, NULL );
+  #endif
+***************
+*** 1195,1201 ****
+  
+      gui.vimTextArea = PtCreateWidget( PtRaw, Pt_DFLT_PARENT, n, args );
+      if( gui.vimTextArea == NULL)
+! 	return( FAIL );
+  
+      /* TODO: use PtAddEventHandlers instead? */
+      /* Not using Ph_EV_BUT_REPEAT because vim wouldn't use it anyway */
+--- 1195,1201 ----
+  
+      gui.vimTextArea = PtCreateWidget( PtRaw, Pt_DFLT_PARENT, n, args );
+      if( gui.vimTextArea == NULL)
+! 	return FAIL;
+  
+      /* TODO: use PtAddEventHandlers instead? */
+      /* Not using Ph_EV_BUT_REPEAT because vim wouldn't use it anyway */
+***************
+*** 1220,1230 ****
+       */
+      gui_ph_timer_cursor  = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+      if( gui_ph_timer_cursor == NULL )
+! 	return( FAIL );
+  
+      gui_ph_timer_timeout = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+      if( gui_ph_timer_timeout == NULL )
+! 	return( FAIL );
+  
+      PtAddCallback( gui_ph_timer_cursor,  Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_cursor, NULL);
+--- 1220,1230 ----
+       */
+      gui_ph_timer_cursor  = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+      if( gui_ph_timer_cursor == NULL )
+! 	return FAIL;
+  
+      gui_ph_timer_timeout = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+      if( gui_ph_timer_timeout == NULL )
+! 	return FAIL;
+  
+      PtAddCallback( gui_ph_timer_cursor,  Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_cursor, NULL);
+***************
+*** 1239,1245 ****
+      gui.vimToolBarGroup = PtCreateWidget( PtToolbarGroup, gui.vimWindow,
+  	    n, args );
+      if( gui.vimToolBarGroup == NULL )
+! 	return( FAIL );
+  
+      PtAddCallback( gui.vimToolBarGroup, Pt_CB_RESIZE,
+  	    gui_ph_handle_menu_resize, NULL );
+--- 1239,1245 ----
+      gui.vimToolBarGroup = PtCreateWidget( PtToolbarGroup, gui.vimWindow,
+  	    n, args );
+      if( gui.vimToolBarGroup == NULL )
+! 	return FAIL;
+  
+      PtAddCallback( gui.vimToolBarGroup, Pt_CB_RESIZE,
+  	    gui_ph_handle_menu_resize, NULL );
+***************
+*** 1254,1260 ****
+      }
+      gui.vimMenuBar = PtCreateWidget( PtMenuBar, gui.vimToolBarGroup, n, args );
+      if( gui.vimMenuBar == NULL )
+! 	return( FAIL );
+  
+  # ifdef FEAT_TOOLBAR
+      n = 0;
+--- 1254,1260 ----
+      }
+      gui.vimMenuBar = PtCreateWidget( PtMenuBar, gui.vimToolBarGroup, n, args );
+      if( gui.vimMenuBar == NULL )
+! 	return FAIL;
+  
+  # ifdef FEAT_TOOLBAR
+      n = 0;
+***************
+*** 1273,1279 ****
+  
+      gui.vimToolBar = PtCreateWidget( PtToolbar, gui.vimToolBarGroup, n, args );
+      if( gui.vimToolBar == NULL )
+! 	return( FAIL );
+  
+      /*
+       * Size for the toolbar is fetched in gui_mch_show_toolbar, after
+--- 1273,1279 ----
+  
+      gui.vimToolBar = PtCreateWidget( PtToolbar, gui.vimToolBarGroup, n, args );
+      if( gui.vimToolBar == NULL )
+! 	return FAIL;
+  
+      /*
+       * Size for the toolbar is fetched in gui_mch_show_toolbar, after
+***************
+*** 1284,1296 ****
+  
+  #endif
+  
+!     return( OK );
+  }
+  
+      int
+  gui_mch_init_check(void)
+  {
+!     return( (is_photon_available == TRUE) ? OK : FAIL );
+  }
+  
+      int
+--- 1284,1296 ----
+  
+  #endif
+  
+!     return OK;
+  }
+  
+      int
+  gui_mch_init_check(void)
+  {
+!     return (is_photon_available == TRUE) ? OK : FAIL;
+  }
+  
+      int
+***************
+*** 1310,1316 ****
+      if (gui_win_x != -1 && gui_win_y != -1)
+  	gui_mch_set_winpos(gui_win_x, gui_win_y);
+  
+!     return( (PtRealizeWidget( gui.vimWindow ) == 0) ? OK : FAIL );
+  }
+  
+      void
+--- 1310,1316 ----
+      if (gui_win_x != -1 && gui_win_y != -1)
+  	gui_mch_set_winpos(gui_win_x, gui_win_y);
+  
+!     return (PtRealizeWidget( gui.vimWindow ) == 0) ? OK : FAIL;
+  }
+  
+      void
+***************
+*** 1336,1342 ****
+  exit_gui_mch_update( void *data )
+  {
+      *(int *)data = FALSE;
+!     return( Pt_END );
+  }
+  
+      void
+--- 1336,1342 ----
+  exit_gui_mch_update( void *data )
+  {
+      *(int *)data = FALSE;
+!     return Pt_END;
+  }
+  
+      void
+***************
+*** 1365,1374 ****
+  	if( input_available() )
+  	{
+  	    PtSetResource( gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, 0, 0 );
+! 	    return( OK );
+  	}
+  	else if( is_timeout == TRUE )
+! 	    return( FAIL );
+      }
+  }
+  
+--- 1365,1374 ----
+  	if( input_available() )
+  	{
+  	    PtSetResource( gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, 0, 0 );
+! 	    return OK;
+  	}
+  	else if( is_timeout == TRUE )
+! 	    return FAIL;
+      }
+  }
+  
+***************
+*** 1446,1454 ****
+  	vim_free( default_path );
+  
+  	if( file.ret == Pt_FSDIALOG_BTN1 )
+! 	    return( vim_strsave( file.path ) );
+      }
+!     return( NULL );
+  }
+  #endif
+  
+--- 1446,1454 ----
+  	vim_free( default_path );
+  
+  	if( file.ret == Pt_FSDIALOG_BTN1 )
+! 	    return vim_strsave(file.path);
+      }
+!     return NULL;
+  }
+  #endif
+  
+***************
+*** 1470,1476 ****
+  
+      PtModalUnblock( modal_ctrl, (void *) button );
+  
+!     return( Pt_TRUE );
+  }
+  
+      static int
+--- 1470,1476 ----
+  
+      PtModalUnblock( modal_ctrl, (void *) button );
+  
+!     return Pt_TRUE;
+  }
+  
+      static int
+***************
+*** 1478,1484 ****
+  {
+      if( info->reason_subtype == Pt_EDIT_ACTIVATE )
+  	gui_ph_dialog_close( 1, data );
+!     return( Pt_CONTINUE );
+  }
+  
+      static int
+--- 1478,1484 ----
+  {
+      if( info->reason_subtype == Pt_EDIT_ACTIVATE )
+  	gui_ph_dialog_close( 1, data );
+!     return Pt_CONTINUE;
+  }
+  
+      static int
+***************
+*** 1490,1498 ****
+      if( ( key->key_flags & Pk_KF_Cap_Valid ) && ( key->key_cap == Pk_Escape ) )
+      {
+  	gui_ph_dialog_close( 0, data );
+! 	return( Pt_CONSUME );
+      }
+!     return( Pt_PROCESS );
+  }
+  
+      int
+--- 1490,1498 ----
+      if( ( key->key_flags & Pk_KF_Cap_Valid ) && ( key->key_cap == Pk_Escape ) )
+      {
+  	gui_ph_dialog_close( 0, data );
+! 	return Pt_CONSUME;
+      }
+!     return Pt_PROCESS;
+  }
+  
+      int
+***************
+*** 1519,1525 ****
+      button_count = len = i = 0;
+  
+      if( buttons == NULL || *buttons == NUL )
+! 	return( -1 );
+  
+      /* There is one less separator than buttons, so bump up the button count */
+      button_count = 1;
+--- 1519,1525 ----
+      button_count = len = i = 0;
+  
+      if( buttons == NULL || *buttons == NUL )
+! 	return -1;
+  
+      /* There is one less separator than buttons, so bump up the button count */
+      button_count = 1;
+***************
+*** 1637,1643 ****
+      vim_free( button_array );
+      vim_free( buttons_copy );
+  
+!     return( dialog_result );
+  }
+  #endif
+  /****************************************************************************/
+--- 1637,1643 ----
+      vim_free( button_array );
+      vim_free( buttons_copy );
+  
+!     return dialog_result;
+  }
+  #endif
+  /****************************************************************************/
+***************
+*** 1653,1659 ****
+      *x = pos->x;
+      *y = pos->y;
+  
+!     return( OK );
+  }
+  
+      void
+--- 1653,1659 ----
+      *x = pos->x;
+      *y = pos->y;
+  
+!     return OK;
+  }
+  
+      void
+***************
+*** 1975,1985 ****
+  hex_digit(int c)
+  {
+      if (VIM_ISDIGIT(c))
+! 	return( c - '0' );
+      c = TOLOWER_ASC(c);
+      if (c >= 'a' && c <= 'f')
+! 	return( c - 'a' + 10 );
+!     return( -1000 );
+  }
+  
+  
+--- 1975,1985 ----
+  hex_digit(int c)
+  {
+      if (VIM_ISDIGIT(c))
+! 	return c - '0';
+      c = TOLOWER_ASC(c);
+      if (c >= 'a' && c <= 'f')
+! 	return c - 'a' + 10;
+!     return -1000;
+  }
+  
+  
+***************
+*** 2065,2077 ****
+  	b = hex_digit( name[5] ) * 16 + hex_digit( name[6] );
+  	if( r < 0 || g < 0 || b < 0 )
+  	    return INVALCOLOR;
+! 	return( RGB( r, g, b ) );
+      }
+  
+      for( i = 0; i < ARRAY_LENGTH( table ); i++ )
+      {
+  	if( STRICMP( name, table[i].name ) == 0 )
+! 	    return( table[i].colour );
+      }
+  
+      /*
+--- 2065,2077 ----
+  	b = hex_digit( name[5] ) * 16 + hex_digit( name[6] );
+  	if( r < 0 || g < 0 || b < 0 )
+  	    return INVALCOLOR;
+! 	return RGB(r, g, b);
+      }
+  
+      for( i = 0; i < ARRAY_LENGTH( table ); i++ )
+      {
+  	if( STRICMP( name, table[i].name ) == 0 )
+! 	    return table[i].colour;
+      }
+  
+      /*
+***************
+*** 2115,2121 ****
+  	    if (STRICMP(color, name) == 0)
+  	    {
+  		fclose(fd);
+! 		return( (guicolor_T) RGB(r,g,b) );
+  	    }
+  	}
+  
+--- 2115,2121 ----
+  	    if (STRICMP(color, name) == 0)
+  	    {
+  		fclose(fd);
+! 		return (guicolor_T)RGB(r, g, b);
+  	    }
+  	}
+  
+***************
+*** 2451,2458 ****
+      for (i = 0; special_keys[i].key_sym != 0; i++)
+  	if (name[0] == special_keys[i].vim_code0 &&
+  		 name[1] == special_keys[i].vim_code1)
+! 	    return( OK );
+!     return( FAIL );
+  }
+  
+  /****************************************************************************/
+--- 2451,2458 ----
+      for (i = 0; special_keys[i].key_sym != 0; i++)
+  	if (name[0] == special_keys[i].vim_code0 &&
+  		 name[1] == special_keys[i].vim_code1)
+! 	    return OK;
+!     return FAIL;
+  }
+  
+  /****************************************************************************/
+***************
+*** 2512,2518 ****
+  
+  	temp_phi = &external_icon;
+      }
+!     return( temp_phi );
+  }
+  
+  /*
+--- 2512,2518 ----
+  
+  	temp_phi = &external_icon;
+      }
+!     return temp_phi;
+  }
+  
+  /*
+***************
+*** 2541,2556 ****
+  	    icon = gui_ph_toolbar_load_icon( full_pathname );
+  
+  	if( icon != NULL )
+! 	    return( icon );
+      }
+  
+      if( menu->iconidx >= 0 &&
+  	    ( menu->iconidx < ARRAY_LENGTH( gui_ph_toolbar_images ) ) )
+      {
+! 	return( gui_ph_toolbar_images[ menu->iconidx ] );
+      }
+  
+!     return( NULL );
+  }
+  #endif
+  
+--- 2541,2556 ----
+  	    icon = gui_ph_toolbar_load_icon( full_pathname );
+  
+  	if( icon != NULL )
+! 	    return icon;
+      }
+  
+      if( menu->iconidx >= 0 &&
+  	    ( menu->iconidx < ARRAY_LENGTH( gui_ph_toolbar_images ) ) )
+      {
+! 	return gui_ph_toolbar_images[menu->iconidx];
+      }
+  
+!     return NULL;
+  }
+  #endif
+  
+***************
+*** 2895,2905 ****
+  	     * at least has the bits we're checking for */
+  	    if( font_size == info.size &&
+  		    style == (info.style & style) )
+! 		return( (GuiFont) font_tag );
+  	}
+  	vim_free( font_tag );
+      }
+!     return( NULL );
+  }
+  
+  /*
+--- 2895,2905 ----
+  	     * at least has the bits we're checking for */
+  	    if( font_size == info.size &&
+  		    style == (info.style & style) )
+! 		return (GuiFont)font_tag;
+  	}
+  	vim_free( font_tag );
+      }
+!     return NULL;
+  }
+  
+  /*
+***************
+*** 2957,2965 ****
+  		}
+  	    }
+  	}
+! 	return( TRUE );
+      }
+!     return( FALSE );
+  }
+  
+      int
+--- 2957,2965 ----
+  		}
+  	    }
+  	}
+! 	return TRUE;
+      }
+!     return FALSE;
+  }
+  
+      int
+***************
+*** 2985,2991 ****
+  		"pcterm12", -1, PHFONT_FIXED, NULL );
+  
+  	if( font_tag == NULL )
+! 	    return( FAIL );
+  
+  	gui_mch_free_font( gui.norm_font );
+  	gui.norm_font = font_tag;
+--- 2985,2991 ----
+  		"pcterm12", -1, PHFONT_FIXED, NULL );
+  
+  	if( font_tag == NULL )
+! 	    return FAIL;
+  
+  	gui_mch_free_font( gui.norm_font );
+  	gui.norm_font = font_tag;
+***************
+*** 2997,3009 ****
+      {
+  	if( gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+  		    &font_size ) == FALSE )
+! 	    return( FAIL );
+  
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, 0 );
+  	if( font_tag == NULL )
+  	{
+  	    vim_free( font_name );
+! 	    return( FAIL );
+  	}
+  
+  	gui_mch_free_font( gui.norm_font );
+--- 2997,3009 ----
+      {
+  	if( gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+  		    &font_size ) == FALSE )
+! 	    return FAIL;
+  
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, 0 );
+  	if( font_tag == NULL )
+  	{
+  	    vim_free( font_name );
+! 	    return FAIL;
+  	}
+  
+  	gui_mch_free_font( gui.norm_font );
+***************
+*** 3026,3032 ****
+      gui.char_ascent = - extent.ul.y;
+  
+      vim_free( font_name );
+!     return( OK );
+  }
+  
+  /*
+--- 3026,3032 ----
+      gui.char_ascent = - extent.ul.y;
+  
+      vim_free( font_name );
+!     return OK;
+  }
+  
+  /*
+***************
+*** 3042,3048 ****
+      gui.char_height = - info.ascender + info.descender + p_linespace;
+      gui.char_ascent = - info.ascender + p_linespace / 2;
+  
+!     return( OK );
+  }
+  
+      GuiFont
+--- 3042,3048 ----
+      gui.char_height = - info.ascender + info.descender + p_linespace;
+      gui.char_ascent = - info.ascender + p_linespace / 2;
+  
+!     return OK;
+  }
+  
+      GuiFont
+***************
+*** 3060,3072 ****
+  	vim_free( font_name );
+  
+  	if( font_tag != NULL )
+! 	    return( (GuiFont) font_tag );
+      }
+  
+      if( report_error )
+  	EMSG2(e_font, vim_font_name );
+  
+!     return( FAIL );
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+--- 3060,3072 ----
+  	vim_free( font_name );
+  
+  	if( font_tag != NULL )
+! 	    return (GuiFont)font_tag;
+      }
+  
+      if( report_error )
+  	EMSG2(e_font, vim_font_name );
+  
+!     return FAIL;
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+*** ../vim-7.3.261/src/version.c	2011-07-27 13:59:12.000000000 +0200
+--- src/version.c	2011-07-27 14:08:08.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     262,
+  /**/
+
+-- 
+You know you use Vim too much when you have this alias in your
+~/.bashrc file: alias :e=/bin/vim             (Eljay Love-Jensen)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.263 b/source/ap/vim/patches/7.3.263
new file mode 100644
index 00000000..98850988
--- /dev/null
+++ b/source/ap/vim/patches/7.3.263
@@ -0,0 +1,162 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.263
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.263
+Problem:    Perl and Tcl have a few code style problems.
+Solution:   Clean it up.  (Elias Diem)
+Files:	    src/if_perl.xs, src/if_tcl.c
+
+
+*** ../vim-7.3.262/src/if_perl.xs	2010-10-23 14:02:48.000000000 +0200
+--- src/if_perl.xs	2011-07-27 14:11:03.000000000 +0200
+***************
+*** 755,761 ****
+  #ifdef HAVE_SANDBOX
+      if (sandbox)
+      {
+! 	safe = perl_get_sv( "VIM::safe", FALSE );
+  # ifndef MAKE_TEST  /* avoid a warning for unreachable code */
+  	if (safe == NULL || !SvTRUE(safe))
+  	    EMSG(_("E299: Perl evaluation forbidden in sandbox without the Safe module"));
+--- 755,761 ----
+  #ifdef HAVE_SANDBOX
+      if (sandbox)
+      {
+! 	safe = perl_get_sv("VIM::safe", FALSE);
+  # ifndef MAKE_TEST  /* avoid a warning for unreachable code */
+  	if (safe == NULL || !SvTRUE(safe))
+  	    EMSG(_("E299: Perl evaluation forbidden in sandbox without the Safe module"));
+***************
+*** 1108,1114 ****
+      VIWIN win
+  
+      PPCODE:
+!     if(items == 1)
+      {
+        EXTEND(sp, 2);
+        if (!win_valid(win))
+--- 1108,1114 ----
+      VIWIN win
+  
+      PPCODE:
+!     if (items == 1)
+      {
+        EXTEND(sp, 2);
+        if (!win_valid(win))
+***************
+*** 1116,1122 ****
+        PUSHs(sv_2mortal(newSViv(win->w_cursor.lnum)));
+        PUSHs(sv_2mortal(newSViv(win->w_cursor.col)));
+      }
+!     else if(items == 3)
+      {
+        int lnum, col;
+  
+--- 1116,1122 ----
+        PUSHs(sv_2mortal(newSViv(win->w_cursor.lnum)));
+        PUSHs(sv_2mortal(newSViv(win->w_cursor.col)));
+      }
+!     else if (items == 3)
+      {
+        int lnum, col;
+  
+***************
+*** 1249,1257 ****
+  	{
+  	    lnum = SvIV(ST(1));
+  	    count = 1 + SvIV(ST(2)) - lnum;
+! 	    if(count == 0)
+  		count = 1;
+! 	    if(count < 0)
+  	    {
+  		lnum -= count;
+  		count = -count;
+--- 1249,1257 ----
+  	{
+  	    lnum = SvIV(ST(1));
+  	    count = 1 + SvIV(ST(2)) - lnum;
+! 	    if (count == 0)
+  		count = 1;
+! 	    if (count < 0)
+  	    {
+  		lnum -= count;
+  		count = -count;
+*** ../vim-7.3.262/src/if_tcl.c	2010-12-17 20:23:56.000000000 +0100
+--- src/if_tcl.c	2011-07-27 14:11:03.000000000 +0200
+***************
+*** 1884,1897 ****
+  {
+      int newerr = OK;
+  
+!     if (error == TCL_EXIT )
+      {
+  	int retval;
+  	char buf[50];
+  	Tcl_Obj *robj;
+  
+  	robj = Tcl_GetObjResult(tclinfo.interp);
+! 	if( Tcl_GetIntFromObj(tclinfo.interp, robj, &retval) != TCL_OK )
+  	{
+  	    EMSG(_("E281: TCL ERROR: exit code is not int!? Please report this to vim-dev@vim.org"));
+  	    newerr = FAIL;
+--- 1884,1897 ----
+  {
+      int newerr = OK;
+  
+!     if (error == TCL_EXIT)
+      {
+  	int retval;
+  	char buf[50];
+  	Tcl_Obj *robj;
+  
+  	robj = Tcl_GetObjResult(tclinfo.interp);
+! 	if (Tcl_GetIntFromObj(tclinfo.interp, robj, &retval) != TCL_OK)
+  	{
+  	    EMSG(_("E281: TCL ERROR: exit code is not int!? Please report this to vim-dev@vim.org"));
+  	    newerr = FAIL;
+***************
+*** 1900,1906 ****
+  	{
+  	    sprintf(buf, _("E572: exit code %d"), retval);
+  	    tclerrmsg(buf);
+! 	    if (retval == 0 )
+  	    {
+  		did_emsg = 0;
+  		newerr = OK;
+--- 1900,1906 ----
+  	{
+  	    sprintf(buf, _("E572: exit code %d"), retval);
+  	    tclerrmsg(buf);
+! 	    if (retval == 0)
+  	    {
+  		did_emsg = 0;
+  		newerr = OK;
+*** ../vim-7.3.262/src/version.c	2011-07-27 14:09:05.000000000 +0200
+--- src/version.c	2011-07-27 14:12:05.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     263,
+  /**/
+
+-- 
+DEAD PERSON:  I don't want to go in the cart!
+CUSTOMER:     Oh, don't be such a baby.
+MORTICIAN:    I can't take him...
+DEAD PERSON:  I feel fine!
+CUSTOMER:     Oh, do us a favor...
+MORTICIAN:    I can't.
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.264 b/source/ap/vim/patches/7.3.264
new file mode 100644
index 00000000..71ec851f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.264
@@ -0,0 +1,159 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.264
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.264
+Problem:    When the current directory name contains wildcard characters, such
+	    as "foo[with]bar", the tags file can't be found.  (Jeremy
+	    Erickson)
+Solution:   When searching for matching files also match without expanding
+	    wildcards.  This is a bit of a hack.
+Files:	    src/vim.h, src/misc1.c, src/misc2.c
+
+
+*** ../vim-7.3.263/src/vim.h	2011-07-20 15:04:52.000000000 +0200
+--- src/vim.h	2011-07-27 16:21:38.000000000 +0200
+***************
+*** 816,821 ****
+--- 816,822 ----
+  #define EW_PATH		0x80	/* search in 'path' too */
+  #define EW_ICASE	0x100	/* ignore case */
+  #define EW_NOERROR	0x200	/* no error for bad regexp */
++ #define EW_NOTWILD	0x400	/* add match with literal name if exists */
+  /* Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND
+   * is used when executing commands and EW_SILENT for interactive expanding. */
+  
+*** ../vim-7.3.263/src/misc1.c	2011-07-20 15:04:52.000000000 +0200
+--- src/misc1.c	2011-07-27 17:24:39.000000000 +0200
+***************
+*** 9119,9125 ****
+  	 * all entries found with "matchname". */
+  	if ((p[0] != '.' || starts_with_dot)
+  		&& (matchname == NULL
+! 		    || vim_regexec(&regmatch, p, (colnr_T)0)))
+  	{
+  #ifdef WIN3264
+  	    STRCPY(s, p);
+--- 9119,9127 ----
+  	 * all entries found with "matchname". */
+  	if ((p[0] != '.' || starts_with_dot)
+  		&& (matchname == NULL
+! 		  || vim_regexec(&regmatch, p, (colnr_T)0)
+! 		  || ((flags & EW_NOTWILD)
+! 		     && fnamencmp(path + (s - buf), p, e - s) == 0)))
+  	{
+  #ifdef WIN3264
+  	    STRCPY(s, p);
+***************
+*** 9323,9329 ****
+      e = p;
+      *e = NUL;
+  
+!     /* now we have one wildcard component between "s" and "e" */
+      /* Remove backslashes between "wildoff" and the start of the wildcard
+       * component. */
+      for (p = buf + wildoff; p < s; ++p)
+--- 9325,9331 ----
+      e = p;
+      *e = NUL;
+  
+!     /* Now we have one wildcard component between "s" and "e". */
+      /* Remove backslashes between "wildoff" and the start of the wildcard
+       * component. */
+      for (p = buf + wildoff; p < s; ++p)
+***************
+*** 9390,9396 ****
+  	    if (dp == NULL)
+  		break;
+  	    if ((dp->d_name[0] != '.' || starts_with_dot)
+! 		    && vim_regexec(&regmatch, (char_u *)dp->d_name, (colnr_T)0))
+  	    {
+  		STRCPY(s, dp->d_name);
+  		len = STRLEN(buf);
+--- 9392,9400 ----
+  	    if (dp == NULL)
+  		break;
+  	    if ((dp->d_name[0] != '.' || starts_with_dot)
+! 		 && (vim_regexec(&regmatch, (char_u *)dp->d_name, (colnr_T)0)
+! 		   || ((flags & EW_NOTWILD)
+! 		     && fnamencmp(path + (s - buf), dp->d_name, e - s) == 0)))
+  	    {
+  		STRCPY(s, dp->d_name);
+  		len = STRLEN(buf);
+*** ../vim-7.3.263/src/misc2.c	2011-07-07 17:15:29.000000000 +0200
+--- src/misc2.c	2011-07-27 17:21:10.000000000 +0200
+***************
+*** 4653,4661 ****
+      {
+  	if (r_ptr[0] == '\\' && r_ptr[1] == ';')
+  	{
+! 	    /* overwrite the escape char,
+! 	     * use STRLEN(r_ptr) to move the trailing '\0'
+! 	     */
+  	    STRMOVE(r_ptr, r_ptr + 1);
+  	    r_ptr++;
+  	}
+--- 4653,4660 ----
+      {
+  	if (r_ptr[0] == '\\' && r_ptr[1] == ';')
+  	{
+! 	    /* Overwrite the escape char,
+! 	     * use STRLEN(r_ptr) to move the trailing '\0'. */
+  	    STRMOVE(r_ptr, r_ptr + 1);
+  	    r_ptr++;
+  	}
+***************
+*** 4914,4923 ****
+  			stackp->ffs_filearray_size = 0;
+  		}
+  		else
+  		    expand_wildcards((dirptrs[1] == NULL) ? 1 : 2, dirptrs,
+  			    &stackp->ffs_filearray_size,
+  			    &stackp->ffs_filearray,
+! 			    EW_DIR|EW_ADDSLASH|EW_SILENT);
+  
+  		stackp->ffs_filearray_cur = 0;
+  		stackp->ffs_stage = 0;
+--- 4913,4925 ----
+  			stackp->ffs_filearray_size = 0;
+  		}
+  		else
++ 		    /* Add EW_NOTWILD because the expanded path may contain
++ 		     * wildcard characters that are to be taken literally.
++ 		     * This is a bit of a hack. */
+  		    expand_wildcards((dirptrs[1] == NULL) ? 1 : 2, dirptrs,
+  			    &stackp->ffs_filearray_size,
+  			    &stackp->ffs_filearray,
+! 			    EW_DIR|EW_ADDSLASH|EW_SILENT|EW_NOTWILD);
+  
+  		stackp->ffs_filearray_cur = 0;
+  		stackp->ffs_stage = 0;
+*** ../vim-7.3.263/src/version.c	2011-07-27 14:15:41.000000000 +0200
+--- src/version.c	2011-07-27 17:25:44.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     264,
+  /**/
+
+-- 
+CUSTOMER:     You're not fooling anyone y'know.  Look, isn't there something
+              you can do?
+DEAD PERSON:  I feel happy... I feel happy.
+    [whop]
+CUSTOMER:     Ah, thanks very much.
+MORTICIAN:    Not at all.  See you on Thursday.
+CUSTOMER:     Right.
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.265 b/source/ap/vim/patches/7.3.265
new file mode 100644
index 00000000..98cb1b4e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.265
@@ -0,0 +1,145 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.265
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.265
+Problem:    When storing a pattern in search history there is no proper check
+	    for the separator character.
+Solution:   Pass the separator character to in_history(). (Muraoka Taro)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.264/src/ex_getln.c	2011-07-07 16:44:33.000000000 +0200
+--- src/ex_getln.c	2011-07-27 17:50:35.000000000 +0200
+***************
+*** 67,73 ****
+  
+  static int	hist_char2type __ARGS((int c));
+  
+! static int	in_history __ARGS((int, char_u *, int));
+  # ifdef FEAT_EVAL
+  static int	calc_hist_idx __ARGS((int histype, int num));
+  # endif
+--- 67,73 ----
+  
+  static int	hist_char2type __ARGS((int c));
+  
+! static int	in_history __ARGS((int, char_u *, int, int));
+  # ifdef FEAT_EVAL
+  static int	calc_hist_idx __ARGS((int histype, int num));
+  # endif
+***************
+*** 5289,5301 ****
+   * If 'move_to_front' is TRUE, matching entry is moved to end of history.
+   */
+      static int
+! in_history(type, str, move_to_front)
+      int	    type;
+      char_u  *str;
+      int	    move_to_front;	/* Move the entry to the front if it exists */
+  {
+      int	    i;
+      int	    last_i = -1;
+  
+      if (hisidx[type] < 0)
+  	return FALSE;
+--- 5289,5303 ----
+   * If 'move_to_front' is TRUE, matching entry is moved to end of history.
+   */
+      static int
+! in_history(type, str, move_to_front, sep)
+      int	    type;
+      char_u  *str;
+      int	    move_to_front;	/* Move the entry to the front if it exists */
++     int	    sep;
+  {
+      int	    i;
+      int	    last_i = -1;
++     char_u  *p;
+  
+      if (hisidx[type] < 0)
+  	return FALSE;
+***************
+*** 5304,5310 ****
+      {
+  	if (history[type][i].hisstr == NULL)
+  	    return FALSE;
+! 	if (STRCMP(str, history[type][i].hisstr) == 0)
+  	{
+  	    if (!move_to_front)
+  		return TRUE;
+--- 5306,5317 ----
+      {
+  	if (history[type][i].hisstr == NULL)
+  	    return FALSE;
+! 
+! 	/* For search history, check that the separator character matches as
+! 	 * well. */
+! 	p = history[type][i].hisstr;
+! 	if (STRCMP(str, p) == 0
+! 		&& (type != HIST_SEARCH || sep == p[STRLEN(p) + 1]))
+  	{
+  	    if (!move_to_front)
+  		return TRUE;
+***************
+*** 5398,5404 ****
+  	}
+  	last_maptick = -1;
+      }
+!     if (!in_history(histype, new_entry, TRUE))
+      {
+  	if (++hisidx[histype] == hislen)
+  	    hisidx[histype] = 0;
+--- 5405,5411 ----
+  	}
+  	last_maptick = -1;
+      }
+!     if (!in_history(histype, new_entry, TRUE, sep))
+      {
+  	if (++hisidx[histype] == hislen)
+  	    hisidx[histype] = 0;
+***************
+*** 5977,5983 ****
+  	if (val != NULL && *val != NUL)
+  	{
+  	    if (!in_history(type, val + (type == HIST_SEARCH),
+! 							viminfo_add_at_front))
+  	    {
+  		/* Need to re-allocate to append the separator byte. */
+  		len = STRLEN(val);
+--- 5984,5990 ----
+  	if (val != NULL && *val != NUL)
+  	{
+  	    if (!in_history(type, val + (type == HIST_SEARCH),
+! 						  viminfo_add_at_front, *val))
+  	    {
+  		/* Need to re-allocate to append the separator byte. */
+  		len = STRLEN(val);
+*** ../vim-7.3.264/src/version.c	2011-07-27 17:31:42.000000000 +0200
+--- src/version.c	2011-07-27 17:58:22.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     265,
+  /**/
+
+-- 
+    [clop clop]
+MORTICIAN:  Who's that then?
+CUSTOMER:   I don't know.
+MORTICIAN:  Must be a king.
+CUSTOMER:   Why?
+MORTICIAN:  He hasn't got shit all over him.
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.266 b/source/ap/vim/patches/7.3.266
new file mode 100644
index 00000000..373280ee
--- /dev/null
+++ b/source/ap/vim/patches/7.3.266
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.266
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.266
+Problem:    In Gvim with iBus typing space in Insert mode doesn't work.
+Solution:   Clear xim_expected_char after checking it.
+Files:	    src/mbyte.c
+
+
+*** ../vim-7.3.265/src/mbyte.c	2011-07-15 21:16:54.000000000 +0200
+--- src/mbyte.c	2011-07-27 18:21:13.000000000 +0200
+***************
+*** 5170,5175 ****
+--- 5170,5179 ----
+  		/* We had a keypad key, and XIM tried to thieve it */
+  		return FALSE;
+  
++ 	    /* This is supposed to fix a problem with iBus, that space
++ 	     * characters don't work in input mode. */
++ 	    xim_expected_char = NUL;
++ 
+  	    /* Normal processing */
+  	    return imresult;
+  	}
+*** ../vim-7.3.265/src/version.c	2011-07-27 17:58:42.000000000 +0200
+--- src/version.c	2011-07-27 18:23:00.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     266,
+  /**/
+
+-- 
+    [clop clop]
+ARTHUR:  Old woman!
+DENNIS:  Man!
+ARTHUR:  Man, sorry.  What knight lives in that castle over there?
+DENNIS:  I'm thirty seven.
+ARTHUR:  What?
+DENNIS:  I'm thirty seven -- I'm not old!
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.267 b/source/ap/vim/patches/7.3.267
new file mode 100644
index 00000000..d986e503
--- /dev/null
+++ b/source/ap/vim/patches/7.3.267
@@ -0,0 +1,67 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.267
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.267
+Problem:    Ruby on Mac OS X 10.7 may crash.
+Solution:   Avoid alloc(0). (Bjorn Winckler)
+Files:	    src/if_ruby.c
+
+
+*** ../vim-7.3.266/src/if_ruby.c	2011-01-17 19:53:20.000000000 +0100
+--- src/if_ruby.c	2011-08-04 18:57:43.000000000 +0200
+***************
+*** 761,771 ****
+      char *buff, *p;
+  
+      str = rb_obj_as_string(str);
+!     buff = ALLOCA_N(char, RSTRING_LEN(str));
+!     strcpy(buff, RSTRING_PTR(str));
+!     p = strchr(buff, '\n');
+!     if (p) *p = '\0';
+!     MSG(buff);
+      return Qnil;
+  }
+  
+--- 761,779 ----
+      char *buff, *p;
+  
+      str = rb_obj_as_string(str);
+!     if (RSTRING_LEN(str) > 0)
+!     {
+! 	/* Only do this when the string isn't empty, alloc(0) causes trouble. */
+! 	buff = ALLOCA_N(char, RSTRING_LEN(str));
+! 	strcpy(buff, RSTRING_PTR(str));
+! 	p = strchr(buff, '\n');
+! 	if (p) *p = '\0';
+! 	MSG(buff);
+!     }
+!     else
+!     {
+! 	MSG("");
+!     }
+      return Qnil;
+  }
+  
+*** ../vim-7.3.266/src/version.c	2011-07-27 18:25:40.000000000 +0200
+--- src/version.c	2011-08-04 19:07:45.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     267,
+  /**/
+
+-- 
+There are 10 kinds of people: Those who understand binary and those who don't.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.268 b/source/ap/vim/patches/7.3.268
new file mode 100644
index 00000000..aa848770
--- /dev/null
+++ b/source/ap/vim/patches/7.3.268
@@ -0,0 +1,69 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.268
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.268
+Problem:    Vim freezes when executing an external command with zsh.
+Solution:   Use O_NOCTTY both in the master and slave. (Bjorn Winckler)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.267/src/os_unix.c	2011-07-07 16:20:45.000000000 +0200
+--- src/os_unix.c	2011-08-04 19:06:14.000000000 +0200
+***************
+*** 3889,3899 ****
+  	if (p_guipty && !(options & (SHELL_READ|SHELL_WRITE)))
+  	{
+  	    pty_master_fd = OpenPTY(&tty_name);	    /* open pty */
+! 	    if (pty_master_fd >= 0 && ((pty_slave_fd =
+! 				    open(tty_name, O_RDWR | O_EXTRA, 0)) < 0))
+  	    {
+! 		close(pty_master_fd);
+! 		pty_master_fd = -1;
+  	    }
+  	}
+  	/*
+--- 3889,3909 ----
+  	if (p_guipty && !(options & (SHELL_READ|SHELL_WRITE)))
+  	{
+  	    pty_master_fd = OpenPTY(&tty_name);	    /* open pty */
+! 	    if (pty_master_fd >= 0)
+  	    {
+! 		/* Leaving out O_NOCTTY may lead to waitpid() always returning
+! 		 * 0 on Mac OS X 10.7 thereby causing freezes. Let's assume
+! 		 * adding O_NOCTTY always works when defined. */
+! #ifdef O_NOCTTY
+! 		pty_slave_fd = open(tty_name, O_RDWR | O_NOCTTY | O_EXTRA, 0);
+! #else
+! 		pty_slave_fd = open(tty_name, O_RDWR | O_EXTRA, 0);
+! #endif
+! 		if (pty_slave_fd < 0)
+! 		{
+! 		    close(pty_master_fd);
+! 		    pty_master_fd = -1;
+! 		}
+  	    }
+  	}
+  	/*
+*** ../vim-7.3.267/src/version.c	2011-08-04 19:34:55.000000000 +0200
+--- src/version.c	2011-08-04 19:36:00.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     268,
+  /**/
+
+-- 
+Mental Floss prevents moral decay!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.269 b/source/ap/vim/patches/7.3.269
new file mode 100644
index 00000000..a0bfc473
--- /dev/null
+++ b/source/ap/vim/patches/7.3.269
@@ -0,0 +1,112 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.269
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.269
+Problem:    'shellcmdflag' only works with one flag. 
+Solution:   Split into multiple arguments. (Gary Johnson)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.268/src/os_unix.c	2011-08-04 19:36:47.000000000 +0200
+--- src/os_unix.c	2011-08-04 20:27:13.000000000 +0200
+***************
+*** 3795,3802 ****
+--- 3795,3804 ----
+      int		retval = -1;
+      char	**argv = NULL;
+      int		argc;
++     char_u	*p_shcf_copy = NULL;
+      int		i;
+      char_u	*p;
++     char_u	*s;
+      int		inquote;
+      int		pty_master_fd = -1;	    /* for pty's */
+  # ifdef FEAT_GUI
+***************
+*** 3855,3860 ****
+--- 3857,3875 ----
+  	}
+  	if (argv == NULL)
+  	{
++ 	    /*
++ 	     * Account for possible multiple args in p_shcf.
++ 	     */
++ 	    p = p_shcf;
++ 	    for (;;)
++ 	    {
++ 		p = skiptowhite(p);
++ 		if (*p == NUL)
++ 		    break;
++ 		++argc;
++ 		p = skipwhite(p);
++ 	    }
++ 
+  	    argv = (char **)alloc((unsigned)((argc + 4) * sizeof(char *)));
+  	    if (argv == NULL)	    /* out of memory */
+  		goto error;
+***************
+*** 3864,3870 ****
+      {
+  	if (extra_shell_arg != NULL)
+  	    argv[argc++] = (char *)extra_shell_arg;
+! 	argv[argc++] = (char *)p_shcf;
+  	argv[argc++] = (char *)cmd;
+      }
+      argv[argc] = NULL;
+--- 3879,3901 ----
+      {
+  	if (extra_shell_arg != NULL)
+  	    argv[argc++] = (char *)extra_shell_arg;
+! 
+! 	/* Break 'shellcmdflag' into white separated parts.  This doesn't
+! 	 * handle quoted strings, they are very unlikely to appear. */
+! 	p_shcf_copy = alloc((unsigned)STRLEN(p_shcf) + 1);
+! 	if (p_shcf_copy == NULL)    /* out of memory */
+! 	    goto error;
+! 	s = p_shcf_copy;
+! 	p = p_shcf;
+! 	while (*p != NUL)
+! 	{
+! 	    argv[argc++] = (char *)s;
+! 	    while (*p && *p != ' ' && *p != TAB)
+! 		*s++ = *p++;
+! 	    *s++ = NUL;
+! 	    p = skipwhite(p);
+! 	}
+! 
+  	argv[argc++] = (char *)cmd;
+      }
+      argv[argc] = NULL;
+***************
+*** 4677,4682 ****
+--- 4708,4714 ----
+  	}
+      }
+      vim_free(argv);
++     vim_free(p_shcf_copy);
+  
+  error:
+      if (!did_settmode)
+*** ../vim-7.3.268/src/version.c	2011-08-04 19:36:47.000000000 +0200
+--- src/version.c	2011-08-04 20:30:44.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     269,
+  /**/
+
+-- 
+Be nice to your kids...  they'll be the ones choosing your nursing home.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.270 b/source/ap/vim/patches/7.3.270
new file mode 100644
index 00000000..3eaf6bfa
--- /dev/null
+++ b/source/ap/vim/patches/7.3.270
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.270
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.270
+Problem:    Illegal memory access.
+Solution:   Swap conditions. (Dominique Pelle)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.269/src/ops.c	2011-07-15 17:51:30.000000000 +0200
+--- src/ops.c	2011-08-10 12:07:22.000000000 +0200
+***************
+*** 6311,6317 ****
+      *wc += words;
+  
+      /* Add eol_size if the end of line was reached before hitting limit. */
+!     if (line[i] == NUL && i < limit)
+      {
+  	i += eol_size;
+  	chars += eol_size;
+--- 6311,6317 ----
+      *wc += words;
+  
+      /* Add eol_size if the end of line was reached before hitting limit. */
+!     if (i < limit && line[i] == NUL)
+      {
+  	i += eol_size;
+  	chars += eol_size;
+*** ../vim-7.3.269/src/version.c	2011-08-04 20:31:50.000000000 +0200
+--- src/version.c	2011-08-10 12:09:30.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     270,
+  /**/
+
+-- 
+An indication you must be a manager:
+You give constructive feedback to your dog.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.271 b/source/ap/vim/patches/7.3.271
new file mode 100644
index 00000000..c42d19a8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.271
@@ -0,0 +1,504 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.271
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.271
+Problem:    Code not following Vim coding style.
+Solution:   Fix the style. (Elias Diem)
+Files:	    src/gui_photon.c
+
+
+*** ../vim-7.3.270/src/gui_photon.c	2011-07-27 14:09:05.000000000 +0200
+--- src/gui_photon.c	2011-08-10 12:18:35.000000000 +0200
+***************
+*** 358,378 ****
+  }
+  
+      static int
+! gui_ph_handle_window_cb( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+      PhWindowEvent_t *we = info->cbdata;
+      ushort_t *width, *height;
+  
+!     switch( we->event_f ) {
+  	case Ph_WM_CLOSE:
+  	    gui_shell_closed();
+  	    break;
+  
+  	case Ph_WM_FOCUS:
+  	    /* Just in case it's hidden and needs to be shown */
+! 	    gui_mch_mousehide( MOUSE_SHOW );
+  
+! 	    if( we->event_state == Ph_WM_EVSTATE_FOCUS )
+  	    {
+  		gui_focus_change(TRUE);
+  		gui_mch_start_blink();
+--- 358,378 ----
+  }
+  
+      static int
+! gui_ph_handle_window_cb(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+      PhWindowEvent_t *we = info->cbdata;
+      ushort_t *width, *height;
+  
+!     switch (we->event_f) {
+  	case Ph_WM_CLOSE:
+  	    gui_shell_closed();
+  	    break;
+  
+  	case Ph_WM_FOCUS:
+  	    /* Just in case it's hidden and needs to be shown */
+! 	    gui_mch_mousehide(MOUSE_SHOW);
+  
+! 	    if (we->event_state == Ph_WM_EVSTATE_FOCUS)
+  	    {
+  		gui_focus_change(TRUE);
+  		gui_mch_start_blink();
+***************
+*** 385,401 ****
+  	    break;
+  
+  	case Ph_WM_RESIZE:
+! 	    PtGetResource( gui.vimWindow, Pt_ARG_WIDTH, &width, 0 );
+! 	    PtGetResource( gui.vimWindow, Pt_ARG_HEIGHT, &height, 0 );
+  #ifdef USE_PANEL_GROUP
+  	    width  -= (pg_margin_left + pg_margin_right);
+  	    height -= (pg_margin_top + pg_margin_bottom);
+  #endif
+! 	    gui_resize_shell( *width, *height );
+! 	    gui_set_shellsize( FALSE, FALSE, RESIZE_BOTH );
+  	    is_ignore_draw = FALSE;
+! 	    PtEndFlux( gui.vimContainer );
+! 	    PtContainerRelease( gui.vimContainer );
+  	    break;
+  
+  	default:
+--- 385,401 ----
+  	    break;
+  
+  	case Ph_WM_RESIZE:
+! 	    PtGetResource(gui.vimWindow, Pt_ARG_WIDTH, &width, 0);
+! 	    PtGetResource(gui.vimWindow, Pt_ARG_HEIGHT, &height, 0);
+  #ifdef USE_PANEL_GROUP
+  	    width  -= (pg_margin_left + pg_margin_right);
+  	    height -= (pg_margin_top + pg_margin_bottom);
+  #endif
+! 	    gui_resize_shell(*width, *height);
+! 	    gui_set_shellsize(FALSE, FALSE, RESIZE_BOTH);
+  	    is_ignore_draw = FALSE;
+! 	    PtEndFlux(gui.vimContainer);
+! 	    PtContainerRelease(gui.vimContainer);
+  	    break;
+  
+  	default:
+***************
+*** 406,412 ****
+  }
+  
+      static int
+! gui_ph_handle_scrollbar( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+      PtScrollbarCallback_t *scroll;
+      scrollbar_T *sb;
+--- 406,412 ----
+  }
+  
+      static int
+! gui_ph_handle_scrollbar(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+      PtScrollbarCallback_t *scroll;
+      scrollbar_T *sb;
+***************
+*** 415,424 ****
+      scroll = info->cbdata;
+  
+      sb = (scrollbar_T *) data;
+!     if( sb != NULL )
+      {
+  	value = scroll->position;
+! 	switch( scroll->action )
+  	{
+  	    case Pt_SCROLL_DRAGGED:
+  		dragging = TRUE;
+--- 415,424 ----
+      scroll = info->cbdata;
+  
+      sb = (scrollbar_T *) data;
+!     if (sb != NULL)
+      {
+  	value = scroll->position;
+! 	switch (scroll->action)
+  	{
+  	    case Pt_SCROLL_DRAGGED:
+  		dragging = TRUE;
+***************
+*** 436,532 ****
+  }
+  
+      static int
+! gui_ph_handle_keyboard( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+      PhKeyEvent_t    *key;
+      unsigned char   string[6];
+      int		    len, i;
+      int		    ch, modifiers;
+  
+!     key = PhGetData( info->event );
+  
+      ch = modifiers = len = 0;
+  
+!     if( p_mh )
+! 	gui_mch_mousehide( MOUSE_HIDE );
+  
+      /* We're a good lil photon program, aren't we? yes we are, yeess wee arrr */
+!     if( key->key_flags & Pk_KF_Compose )
+      {
+  	return Pt_CONTINUE;
+      }
+  
+!     if( (key->key_flags & Pk_KF_Cap_Valid) &&
+! 	    PkIsKeyDown( key->key_flags ) )
+      {
+  #ifdef FEAT_MENU
+  	/*
+  	 * Only show the menu if the Alt key is down, and the Shift & Ctrl
+  	 * keys aren't down, as well as the other conditions
+  	 */
+! 	if( ( ( key->key_mods & Pk_KM_Alt ) &&
+! 		    !( key->key_mods & Pk_KM_Shift ) &&
+! 		    !( key->key_mods & Pk_KM_Ctrl ) ) &&
+  	    gui.menu_is_active &&
+! 	    ( *p_wak == 'y' ||
+! 	      ( *p_wak == 'm' &&
+! 		gui_is_menu_shortcut( key->key_cap ) ) ) )
+  	{
+  	    /* Fallthrough and let photon look for the hotkey */
+  	    return Pt_CONTINUE;
+  	}
+  #endif
+  
+! 	for( i = 0; special_keys[i].key_sym != 0; i++ )
+  	{
+! 	    if( special_keys[i].key_sym == key->key_cap )
+  	    {
+  		len = 0;
+! 		if( special_keys[i].vim_code1 == NUL )
+  		    ch = special_keys[i].vim_code0;
+  		else
+  		{
+  		    /* Detect if a keypad number key has been pressed
+  		     * and change the key if Num Lock is on */
+! 		    if( key->key_cap >= Pk_KP_Enter && key->key_cap <= Pk_KP_9
+! 			    && ( key->key_mods & Pk_KM_Num_Lock ) )
+  		    {
+  			/* FIXME: For now, just map the key to a ascii value
+  			 * (see <photon/PkKeyDef.h>) */
+  			ch = key->key_cap - 0xf080;
+  		    }
+  		    else
+! 			ch = TO_SPECIAL( special_keys[i].vim_code0,
+! 				special_keys[i].vim_code1 );
+  		}
+  		break;
+  	    }
+  	}
+  
+! 	if( key->key_mods & Pk_KM_Ctrl )
+  	    modifiers |= MOD_MASK_CTRL;
+! 	if( key->key_mods & Pk_KM_Alt )
+  	    modifiers |= MOD_MASK_ALT;
+! 	if( key->key_mods & Pk_KM_Shift )
+  	    modifiers |= MOD_MASK_SHIFT;
+  
+  	/* Is this not a special key? */
+! 	if( special_keys[i].key_sym == 0 )
+  	{
+! 	    ch = PhTo8859_1( key );
+! 	    if( ch == -1
+  #ifdef FEAT_MBYTE
+! 		|| ( enc_utf8 && ch > 127 )
+  #endif
+  		)
+  	    {
+  #ifdef FEAT_MBYTE
+! 		len = PhKeyToMb( string, key );
+! 		if( len > 0 )
+  		{
+  		    static char buf[6];
+  		    int src_taken, dst_made;
+! 		    if( enc_utf8 != TRUE )
+  		    {
+  			PxTranslateFromUTF(
+  				charset_translate,
+--- 436,532 ----
+  }
+  
+      static int
+! gui_ph_handle_keyboard(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+      PhKeyEvent_t    *key;
+      unsigned char   string[6];
+      int		    len, i;
+      int		    ch, modifiers;
+  
+!     key = PhGetData(info->event);
+  
+      ch = modifiers = len = 0;
+  
+!     if (p_mh)
+! 	gui_mch_mousehide(MOUSE_HIDE);
+  
+      /* We're a good lil photon program, aren't we? yes we are, yeess wee arrr */
+!     if (key->key_flags & Pk_KF_Compose)
+      {
+  	return Pt_CONTINUE;
+      }
+  
+!     if ((key->key_flags & Pk_KF_Cap_Valid) &&
+! 	    PkIsKeyDown(key->key_flags))
+      {
+  #ifdef FEAT_MENU
+  	/*
+  	 * Only show the menu if the Alt key is down, and the Shift & Ctrl
+  	 * keys aren't down, as well as the other conditions
+  	 */
+! 	if (((key->key_mods & Pk_KM_Alt) &&
+! 		    !(key->key_mods & Pk_KM_Shift) &&
+! 		    !(key->key_mods & Pk_KM_Ctrl)) &&
+  	    gui.menu_is_active &&
+! 	    (*p_wak == 'y' ||
+! 	      (*p_wak == 'm' &&
+! 		gui_is_menu_shortcut(key->key_cap))))
+  	{
+  	    /* Fallthrough and let photon look for the hotkey */
+  	    return Pt_CONTINUE;
+  	}
+  #endif
+  
+! 	for(i = 0; special_keys[i].key_sym != 0; i++)
+  	{
+! 	    if (special_keys[i].key_sym == key->key_cap)
+  	    {
+  		len = 0;
+! 		if (special_keys[i].vim_code1 == NUL)
+  		    ch = special_keys[i].vim_code0;
+  		else
+  		{
+  		    /* Detect if a keypad number key has been pressed
+  		     * and change the key if Num Lock is on */
+! 		    if (key->key_cap >= Pk_KP_Enter && key->key_cap <= Pk_KP_9
+! 			    && (key->key_mods & Pk_KM_Num_Lock))
+  		    {
+  			/* FIXME: For now, just map the key to a ascii value
+  			 * (see <photon/PkKeyDef.h>) */
+  			ch = key->key_cap - 0xf080;
+  		    }
+  		    else
+! 			ch = TO_SPECIAL(special_keys[i].vim_code0,
+! 				special_keys[i].vim_code1);
+  		}
+  		break;
+  	    }
+  	}
+  
+! 	if (key->key_mods & Pk_KM_Ctrl)
+  	    modifiers |= MOD_MASK_CTRL;
+! 	if (key->key_mods & Pk_KM_Alt)
+  	    modifiers |= MOD_MASK_ALT;
+! 	if (key->key_mods & Pk_KM_Shift)
+  	    modifiers |= MOD_MASK_SHIFT;
+  
+  	/* Is this not a special key? */
+! 	if (special_keys[i].key_sym == 0)
+  	{
+! 	    ch = PhTo8859_1(key);
+! 	    if (ch == -1
+  #ifdef FEAT_MBYTE
+! 		|| (enc_utf8 && ch > 127)
+  #endif
+  		)
+  	    {
+  #ifdef FEAT_MBYTE
+! 		len = PhKeyToMb(string, key);
+! 		if (len > 0)
+  		{
+  		    static char buf[6];
+  		    int src_taken, dst_made;
+! 		    if (enc_utf8 != TRUE)
+  		    {
+  			PxTranslateFromUTF(
+  				charset_translate,
+***************
+*** 2931,2943 ****
+  	name_len = (int_u) ( mark - vim_font );
+  
+      *font_name = vim_strnsave( vim_font, name_len );
+!     if( *font_name != NULL )
+      {
+! 	if( mark != NULL )
+  	{
+! 	    while( *mark != NUL && *mark++ == ':')
+  	    {
+! 		switch( tolower( *mark++ ) )
+  		{
+  		    case 'a': *font_flags |= PF_STYLE_ANTIALIAS; break;
+  		    case 'b': *font_flags |= PF_STYLE_BOLD; break;
+--- 2931,2943 ----
+  	name_len = (int_u) ( mark - vim_font );
+  
+      *font_name = vim_strnsave( vim_font, name_len );
+!     if (*font_name != NULL)
+      {
+! 	if (mark != NULL)
+  	{
+! 	    while (*mark != NUL && *mark++ == ':')
+  	    {
+! 		switch (tolower(*mark++))
+  		{
+  		    case 'a': *font_flags |= PF_STYLE_ANTIALIAS; break;
+  		    case 'b': *font_flags |= PF_STYLE_BOLD; break;
+***************
+*** 2946,2952 ****
+  		    case 's':
+  			size = getdigits( &mark );
+  			/* Restrict the size to some vague limits */
+! 			if( size < 1 || size > 100 )
+  			    size = 8;
+  
+  			*font_size = size;
+--- 2946,2952 ----
+  		    case 's':
+  			size = getdigits( &mark );
+  			/* Restrict the size to some vague limits */
+! 			if (size < 1 || size > 100)
+  			    size = 8;
+  
+  			*font_size = size;
+***************
+*** 2973,2990 ****
+      FontQueryInfo info;
+      PhRect_t extent;
+  
+!     if( vim_font_name == NULL )
+      {
+  	/* Default font */
+  	vim_font_name = "PC Terminal";
+      }
+  
+!     if( STRCMP( vim_font_name, "*" ) == 0 )
+      {
+  	font_tag = PtFontSelection( gui.vimWindow, NULL, NULL,
+  		"pcterm12", -1, PHFONT_FIXED, NULL );
+  
+! 	if( font_tag == NULL )
+  	    return FAIL;
+  
+  	gui_mch_free_font( gui.norm_font );
+--- 2973,2990 ----
+      FontQueryInfo info;
+      PhRect_t extent;
+  
+!     if (vim_font_name == NULL)
+      {
+  	/* Default font */
+  	vim_font_name = "PC Terminal";
+      }
+  
+!     if (STRCMP( vim_font_name, "*" ) == 0)
+      {
+  	font_tag = PtFontSelection( gui.vimWindow, NULL, NULL,
+  		"pcterm12", -1, PHFONT_FIXED, NULL );
+  
+! 	if (font_tag == NULL)
+  	    return FAIL;
+  
+  	gui_mch_free_font( gui.norm_font );
+***************
+*** 2995,3006 ****
+      }
+      else
+      {
+! 	if( gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		    &font_size ) == FALSE )
+  	    return FAIL;
+  
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, 0 );
+! 	if( font_tag == NULL )
+  	{
+  	    vim_free( font_name );
+  	    return FAIL;
+--- 2995,3006 ----
+      }
+      else
+      {
+! 	if (gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		    &font_size ) == FALSE)
+  	    return FAIL;
+  
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, 0 );
+! 	if (font_tag == NULL)
+  	{
+  	    vim_free( font_name );
+  	    return FAIL;
+***************
+*** 3053,3069 ****
+      int_u   font_size = 12;
+      int_u   font_flags = 0;
+  
+!     if( gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		&font_size ) != FALSE )
+      {
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, -1 );
+  	vim_free( font_name );
+  
+! 	if( font_tag != NULL )
+  	    return (GuiFont)font_tag;
+      }
+  
+!     if( report_error )
+  	EMSG2(e_font, vim_font_name );
+  
+      return FAIL;
+--- 3053,3069 ----
+      int_u   font_size = 12;
+      int_u   font_flags = 0;
+  
+!     if (gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		&font_size ) != FALSE)
+      {
+  	font_tag = gui_ph_get_font( font_name, font_flags, font_size, -1 );
+  	vim_free( font_name );
+  
+! 	if (font_tag != NULL)
+  	    return (GuiFont)font_tag;
+      }
+  
+!     if (report_error)
+  	EMSG2(e_font, vim_font_name );
+  
+      return FAIL;
+*** ../vim-7.3.270/src/version.c	2011-08-10 12:10:55.000000000 +0200
+--- src/version.c	2011-08-10 12:17:06.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     271,
+  /**/
+
+-- 
+An indication you must be a manager:
+You believe you never have any problems in your life, just
+"issues" and "improvement opportunities".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.272 b/source/ap/vim/patches/7.3.272
new file mode 100644
index 00000000..b512a1fd
--- /dev/null
+++ b/source/ap/vim/patches/7.3.272
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.272
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.272
+Problem:    ":put =list" does not add an empty line for a trailing empty
+            item.
+Solution:   Add a trailing NL when turning a list into a string.
+Files:      src/eval.c
+    
+
+*** ../vim-7.3.271/src/eval.c	2011-07-15 21:24:06.000000000 +0200
+--- src/eval.c	2011-08-10 12:31:51.000000000 +0200
+***************
+*** 1357,1363 ****
+--- 1357,1367 ----
+  	{
+  	    ga_init2(&ga, (int)sizeof(char), 80);
+  	    if (tv.vval.v_list != NULL)
++ 	    {
+  		list_join(&ga, tv.vval.v_list, (char_u *)"\n", TRUE, 0);
++ 		if (tv.vval.v_list->lv_len > 0)
++ 		    ga_append(&ga, NL);
++ 	    }
+  	    ga_append(&ga, NUL);
+  	    retval = (char_u *)ga.ga_data;
+  	}
+*** ../vim-7.3.271/src/version.c	2011-08-10 12:19:00.000000000 +0200
+--- src/version.c	2011-08-10 12:36:41.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     272,
+  /**/
+
+-- 
+Lose weight, NEVER Diet again with
+                  The "Invisible Weight Loss Patch"
+						(spam e-mail)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.273 b/source/ap/vim/patches/7.3.273
new file mode 100644
index 00000000..e74eb5a2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.273
@@ -0,0 +1,124 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.273
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.273
+Problem:    A BOM in an error file is seen as text. (Aleksey Baibarin)
+Solution:   Remove the BOM from the text before evaluating. (idea by Christian
+            Brabandt)
+Files:      src/quickfix.c, src/mbyte.c, src/proto/mbyte.pro,
+            src/testdir/test10.in
+    
+
+*** ../vim-7.3.272/src/quickfix.c	2011-05-19 17:42:54.000000000 +0200
+--- src/quickfix.c	2011-08-10 12:56:15.000000000 +0200
+***************
+*** 561,566 ****
+--- 561,570 ----
+  	    break;
+  
+  	IObuff[CMDBUFFSIZE - 2] = NUL;  /* for very long lines */
++ #ifdef FEAT_MBYTE
++ 	remove_bom(IObuff);
++ #endif
++ 
+  	if ((efmp = vim_strrchr(IObuff, '\n')) != NULL)
+  	    *efmp = NUL;
+  #ifdef USE_CRNL
+*** ../vim-7.3.272/src/mbyte.c	2011-07-27 18:25:40.000000000 +0200
+--- src/mbyte.c	2011-08-10 13:11:56.000000000 +0200
+***************
+*** 838,843 ****
+--- 838,864 ----
+  }
+  
+  /*
++  * Remove all BOM from "s" by moving remaining text.
++  */
++     void
++ remove_bom(s)
++     char_u *s;
++ {
++     if (enc_utf8)
++     {
++ 	char_u *p = s;
++ 
++ 	while ((p = vim_strbyte(p, 0xef)) != NULL)
++ 	{
++ 	    if (p[1] == 0xbb && p[2] == 0xbf)
++ 		STRMOVE(p, p + 3);
++ 	    else
++ 		++p;
++ 	}
++     }
++ }
++ 
++ /*
+   * Get class of pointer:
+   * 0 for blank or NUL
+   * 1 for punctuation
+*** ../vim-7.3.272/src/proto/mbyte.pro	2011-07-07 15:08:53.000000000 +0200
+--- src/proto/mbyte.pro	2011-08-10 12:50:44.000000000 +0200
+***************
+*** 2,7 ****
+--- 2,8 ----
+  int enc_canon_props __ARGS((char_u *name));
+  char_u *mb_init __ARGS((void));
+  int bomb_size __ARGS((void));
++ void remove_bom __ARGS((char_u *s));
+  int mb_get_class __ARGS((char_u *p));
+  int dbcs_class __ARGS((unsigned lead, unsigned trail));
+  int latin_char2len __ARGS((int c));
+*** ../vim-7.3.272/src/testdir/test10.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test10.in	2011-08-10 13:01:46.000000000 +0200
+***************
+*** 2,7 ****
+--- 2,10 ----
+  
+  STARTTEST
+  :so small.vim
++ :" Also test a BOM is ignored.
++ :so mbyte.vim
++ :set encoding=utf-8
+  :/start of errorfile/,/end of errorfile/w! Xerrorfile
+  :/start of testfile/,/end of testfile/w! Xtestfile
+  :cf Xerrorfile
+***************
+*** 20,26 ****
+  
+  start of errorfile
+  "Xtestfile", line 4.12: 1506-045 (S) Undeclared identifier fd_set.
+! "Xtestfile", line 7 col 19; this is an error
+  gcc -c -DHAVE_CONFIsing-prototypes -I/usr/X11R6/include  version.c
+  Xtestfile:13: parse error before `asd'
+  make: *** [vim] Error 1
+--- 23,29 ----
+  
+  start of errorfile
+  "Xtestfile", line 4.12: 1506-045 (S) Undeclared identifier fd_set.
+! "Xtestfile", line 7 col 19; this is an error
+  gcc -c -DHAVE_CONFIsing-prototypes -I/usr/X11R6/include  version.c
+  Xtestfile:13: parse error before `asd'
+  make: *** [vim] Error 1
+*** ../vim-7.3.272/src/version.c	2011-08-10 12:38:02.000000000 +0200
+--- src/version.c	2011-08-10 13:14:35.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     273,
+  /**/
+
+-- 
+Compilation process failed successfully.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.274 b/source/ap/vim/patches/7.3.274
new file mode 100644
index 00000000..48faf3cf
--- /dev/null
+++ b/source/ap/vim/patches/7.3.274
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.274
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.274
+Problem:    With concealed characters tabs do not have the right size.
+Solution:   Use VCOL_HLC instead of vcol. (Eiichi Sato)
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.273/src/screen.c	2011-03-22 13:29:20.000000000 +0100
+--- src/screen.c	2011-08-10 14:22:47.000000000 +0200
+***************
+*** 4252,4258 ****
+  		{
+  		    /* tab amount depends on current column */
+  		    n_extra = (int)wp->w_buffer->b_p_ts
+! 				   - vcol % (int)wp->w_buffer->b_p_ts - 1;
+  #ifdef FEAT_MBYTE
+  		    mb_utf8 = FALSE;	/* don't draw as UTF-8 */
+  #endif
+--- 4252,4258 ----
+  		{
+  		    /* tab amount depends on current column */
+  		    n_extra = (int)wp->w_buffer->b_p_ts
+! 				   - VCOL_HLC % (int)wp->w_buffer->b_p_ts - 1;
+  #ifdef FEAT_MBYTE
+  		    mb_utf8 = FALSE;	/* don't draw as UTF-8 */
+  #endif
+*** ../vim-7.3.273/src/version.c	2011-08-10 13:21:30.000000000 +0200
+--- src/version.c	2011-08-10 14:23:38.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     274,
+  /**/
+
+-- 
+   Arthur pulls Pin out.  The MONK blesses the grenade as ...
+ARTHUR:  (quietly) One, two, five ...
+GALAHAD: Three, sir!
+ARTHUR:  Three.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.275 b/source/ap/vim/patches/7.3.275
new file mode 100644
index 00000000..2bdd145b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.275
@@ -0,0 +1,77 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.275
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.275
+Problem:    MS-Windows: When using a black background some screen updates
+	    cause the window to flicker.
+Solution:   Add WS_CLIPCHILDREN to CreateWindow().  (René Aguirre)
+Files:	    src/gui_w32.c
+
+
+*** ../vim-7.3.274/src/gui_w32.c	2011-07-07 17:43:37.000000000 +0200
+--- src/gui_w32.c	2011-08-10 14:40:58.000000000 +0200
+***************
+*** 1379,1385 ****
+  	    s_hwnd = CreateWindowEx(
+  		WS_EX_MDICHILD,
+  		szVimWndClass, "Vim MSWindows GUI",
+! 		WS_OVERLAPPEDWINDOW | WS_CHILD | WS_CLIPSIBLINGS | 0xC000,
+  		gui_win_x == -1 ? CW_USEDEFAULT : gui_win_x,
+  		gui_win_y == -1 ? CW_USEDEFAULT : gui_win_y,
+  		100,				/* Any value will do */
+--- 1379,1386 ----
+  	    s_hwnd = CreateWindowEx(
+  		WS_EX_MDICHILD,
+  		szVimWndClass, "Vim MSWindows GUI",
+! 		WS_OVERLAPPEDWINDOW | WS_CHILD
+! 				 | WS_CLIPSIBLINGS | WS_CLIPCHILDREN | 0xC000,
+  		gui_win_x == -1 ? CW_USEDEFAULT : gui_win_x,
+  		gui_win_y == -1 ? CW_USEDEFAULT : gui_win_y,
+  		100,				/* Any value will do */
+***************
+*** 1410,1416 ****
+  	 * titlebar, it will be reparented below. */
+  	s_hwnd = CreateWindow(
+  		szVimWndClass, "Vim MSWindows GUI",
+! 		win_socket_id == 0 ? WS_OVERLAPPEDWINDOW : WS_POPUP,
+  		gui_win_x == -1 ? CW_USEDEFAULT : gui_win_x,
+  		gui_win_y == -1 ? CW_USEDEFAULT : gui_win_y,
+  		100,				/* Any value will do */
+--- 1411,1418 ----
+  	 * titlebar, it will be reparented below. */
+  	s_hwnd = CreateWindow(
+  		szVimWndClass, "Vim MSWindows GUI",
+! 		(win_socket_id == 0 ? WS_OVERLAPPEDWINDOW : WS_POPUP)
+! 					  | WS_CLIPSIBLINGS | WS_CLIPCHILDREN,
+  		gui_win_x == -1 ? CW_USEDEFAULT : gui_win_x,
+  		gui_win_y == -1 ? CW_USEDEFAULT : gui_win_y,
+  		100,				/* Any value will do */
+*** ../vim-7.3.274/src/version.c	2011-08-10 14:32:33.000000000 +0200
+--- src/version.c	2011-08-10 14:39:14.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     275,
+  /**/
+
+-- 
+ARTHUR:          What does it say?
+BROTHER MAYNARD: It reads ... "Here may be found the last words of Joseph of
+                 Aramathea." "He who is valorous and pure of heart may find
+                 the Holy Grail in the aaaaarrrrrrggghhh..."
+ARTHUR:          What?
+BROTHER MAYNARD: "The Aaaaarrrrrrggghhh..."
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.276 b/source/ap/vim/patches/7.3.276
new file mode 100644
index 00000000..3af02457
--- /dev/null
+++ b/source/ap/vim/patches/7.3.276
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.276
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.276
+Problem:    GvimExt sets $LANG in the wrong way.
+Solution:   Save the environment and use it for gvim. (Yasuhiro Matsumoto)
+Files:	    src/GvimExt/gvimext.cpp
+
+
+*** ../vim-7.3.275/src/GvimExt/gvimext.cpp	2011-07-20 17:27:17.000000000 +0200
+--- src/GvimExt/gvimext.cpp	2011-08-10 16:25:32.000000000 +0200
+***************
+*** 142,147 ****
+--- 142,148 ----
+  static int dyn_libintl_init(char *dir);
+  static void dyn_libintl_end(void);
+  
++ static wchar_t *oldenv = NULL;
+  static HINSTANCE hLibintlDLL = 0;
+  static char *(*dyn_libintl_gettext)(const char *) = null_libintl_gettext;
+  static char *(*dyn_libintl_textdomain)(const char *) = null_libintl_textdomain;
+***************
+*** 339,346 ****
+  inc_cRefThisDLL()
+  {
+  #ifdef FEAT_GETTEXT
+!     if (g_cRefThisDll == 0)
+  	dyn_gettext_load();
+  #endif
+      InterlockedIncrement((LPLONG)&g_cRefThisDll);
+  }
+--- 340,349 ----
+  inc_cRefThisDLL()
+  {
+  #ifdef FEAT_GETTEXT
+!     if (g_cRefThisDll == 0) {
+  	dyn_gettext_load();
++ 	oldenv = GetEnvironmentStringsW();
++     }
+  #endif
+      InterlockedIncrement((LPLONG)&g_cRefThisDll);
+  }
+***************
+*** 349,356 ****
+  dec_cRefThisDLL()
+  {
+  #ifdef FEAT_GETTEXT
+!     if (InterlockedDecrement((LPLONG)&g_cRefThisDll) == 0)
+  	dyn_gettext_free();
+  #else
+      InterlockedDecrement((LPLONG)&g_cRefThisDll);
+  #endif
+--- 352,364 ----
+  dec_cRefThisDLL()
+  {
+  #ifdef FEAT_GETTEXT
+!     if (InterlockedDecrement((LPLONG)&g_cRefThisDll) == 0) {
+  	dyn_gettext_free();
++ 	if (oldenv != NULL) {
++ 	    FreeEnvironmentStringsW(oldenv);
++ 	    oldenv = NULL;
++ 	}
++     }
+  #else
+      InterlockedDecrement((LPLONG)&g_cRefThisDll);
+  #endif
+***************
+*** 905,912 ****
+  			NULL,		// Process handle not inheritable.
+  			NULL,		// Thread handle not inheritable.
+  			FALSE,		// Set handle inheritance to FALSE.
+! 			0,		// No creation flags.
+! 			NULL,		// Use parent's environment block.
+  			NULL,		// Use parent's starting directory.
+  			&si,		// Pointer to STARTUPINFO structure.
+  			&pi)		// Pointer to PROCESS_INFORMATION structure.
+--- 913,920 ----
+  			NULL,		// Process handle not inheritable.
+  			NULL,		// Thread handle not inheritable.
+  			FALSE,		// Set handle inheritance to FALSE.
+! 			oldenv == NULL ? 0 : CREATE_UNICODE_ENVIRONMENT,
+! 			oldenv,		// Use unmodified environment block.
+  			NULL,		// Use parent's starting directory.
+  			&si,		// Pointer to STARTUPINFO structure.
+  			&pi)		// Pointer to PROCESS_INFORMATION structure.
+***************
+*** 987,994 ****
+  		NULL,		// Process handle not inheritable.
+  		NULL,		// Thread handle not inheritable.
+  		FALSE,		// Set handle inheritance to FALSE.
+! 		0,		// No creation flags.
+! 		NULL,		// Use parent's environment block.
+  		NULL,		// Use parent's starting directory.
+  		&si,		// Pointer to STARTUPINFO structure.
+  		&pi)		// Pointer to PROCESS_INFORMATION structure.
+--- 995,1002 ----
+  		NULL,		// Process handle not inheritable.
+  		NULL,		// Thread handle not inheritable.
+  		FALSE,		// Set handle inheritance to FALSE.
+! 		oldenv == NULL ? 0 : CREATE_UNICODE_ENVIRONMENT,
+! 		oldenv,		// Use unmodified environment block.
+  		NULL,		// Use parent's starting directory.
+  		&si,		// Pointer to STARTUPINFO structure.
+  		&pi)		// Pointer to PROCESS_INFORMATION structure.
+*** ../vim-7.3.275/src/version.c	2011-08-10 15:56:24.000000000 +0200
+--- src/version.c	2011-08-10 16:28:42.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     276,
+  /**/
+
+-- 
+User:       I'm having problems with my text editor.
+Help desk:  Which editor are you using?
+User:       I don't know, but it's version VI (pronounced: 6).
+Help desk:  Oh, then you should upgrade to version VIM (pronounced: 994).
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.277 b/source/ap/vim/patches/7.3.277
new file mode 100644
index 00000000..3509a1a6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.277
@@ -0,0 +1,348 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.277
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.277
+Problem:    MS-Windows: some characters do not show in dialogs.
+Solution:   Use the wide methods when available. (Yanwei Jia)
+Files:      src/gui_w32.c, src/gui_w48.c, src/os_mswin.c, src/os_win32.c,
+            src/os_win32.h
+    
+
+*** ../vim-7.3.276/src/gui_w32.c	2011-08-10 15:56:24.000000000 +0200
+--- src/gui_w32.c	2011-08-10 16:52:55.000000000 +0200
+***************
+*** 1270,1275 ****
+--- 1270,1294 ----
+  	pGetMonitorInfo = (TGetMonitorInfo)GetProcAddress(user32_lib,
+  							  "GetMonitorInfoA");
+      }
++ 
++ #ifdef FEAT_MBYTE
++     /* If the OS is Windows NT, use wide functions;
++      * this enables common dialogs input unicode from IME. */
++     if (os_version.dwPlatformId == VER_PLATFORM_WIN32_NT)
++     {
++ 	pDispatchMessage = DispatchMessageW;
++ 	pGetMessage = GetMessageW;
++ 	pIsDialogMessage = IsDialogMessageW;
++ 	pPeekMessage = PeekMessageW;
++     }
++     else
++     {
++ 	pDispatchMessage = DispatchMessageA;
++ 	pGetMessage = GetMessageA;
++ 	pIsDialogMessage = IsDialogMessageA;
++ 	pPeekMessage = PeekMessageA;
++     }
++ #endif
+  }
+  
+  /*
+*** ../vim-7.3.276/src/gui_w48.c	2010-10-20 21:22:17.000000000 +0200
+--- src/gui_w48.c	2011-08-10 16:49:39.000000000 +0200
+***************
+*** 390,396 ****
+      KillTimer(NULL, idEvent);
+  
+      /* Eat spurious WM_TIMER messages */
+!     while (PeekMessage(&msg, hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	;
+  
+      if (blink_state == BLINK_ON)
+--- 390,396 ----
+      KillTimer(NULL, idEvent);
+  
+      /* Eat spurious WM_TIMER messages */
+!     while (pPeekMessage(&msg, hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	;
+  
+      if (blink_state == BLINK_ON)
+***************
+*** 418,424 ****
+      {
+  	KillTimer(NULL, blink_timer);
+  	/* Eat spurious WM_TIMER messages */
+! 	while (PeekMessage(&msg, s_hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	    ;
+  	blink_timer = 0;
+      }
+--- 418,424 ----
+      {
+  	KillTimer(NULL, blink_timer);
+  	/* Eat spurious WM_TIMER messages */
+! 	while (pPeekMessage(&msg, s_hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	    ;
+  	blink_timer = 0;
+      }
+***************
+*** 476,482 ****
+      s_timed_out = TRUE;
+  
+      /* Eat spurious WM_TIMER messages */
+!     while (PeekMessage(&msg, hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	;
+      if (idEvent == s_wait_timer)
+  	s_wait_timer = 0;
+--- 476,482 ----
+      s_timed_out = TRUE;
+  
+      /* Eat spurious WM_TIMER messages */
+!     while (pPeekMessage(&msg, hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  	;
+      if (idEvent == s_wait_timer)
+  	s_wait_timer = 0;
+***************
+*** 1707,1713 ****
+      static char_u k10[] = {K_SPECIAL, 'k', ';', 0};
+  #endif
+  
+!     GetMessage(&msg, NULL, 0, 0);
+  
+  #ifdef FEAT_OLE
+      /* Look after OLE Automation commands */
+--- 1707,1713 ----
+      static char_u k10[] = {K_SPECIAL, 'k', ';', 0};
+  #endif
+  
+!     pGetMessage(&msg, NULL, 0, 0);
+  
+  #ifdef FEAT_OLE
+      /* Look after OLE Automation commands */
+***************
+*** 1718,1724 ****
+  	{
+  	    /* Message can't be ours, forward it.  Fixes problem with Ultramon
+  	     * 3.0.4 */
+! 	    DispatchMessage(&msg);
+  	}
+  	else
+  	{
+--- 1718,1724 ----
+  	{
+  	    /* Message can't be ours, forward it.  Fixes problem with Ultramon
+  	     * 3.0.4 */
+! 	    pDispatchMessage(&msg);
+  	}
+  	else
+  	{
+***************
+*** 1749,1762 ****
+      if (msg.message == WM_USER)
+      {
+  	MyTranslateMessage(&msg);
+! 	DispatchMessage(&msg);
+  	return;
+      }
+  #endif
+  
+  #ifdef MSWIN_FIND_REPLACE
+      /* Don't process messages used by the dialog */
+!     if (s_findrep_hwnd != NULL && IsDialogMessage(s_findrep_hwnd, &msg))
+      {
+  	HandleMouseHide(msg.message, msg.lParam);
+  	return;
+--- 1749,1762 ----
+      if (msg.message == WM_USER)
+      {
+  	MyTranslateMessage(&msg);
+! 	pDispatchMessage(&msg);
+  	return;
+      }
+  #endif
+  
+  #ifdef MSWIN_FIND_REPLACE
+      /* Don't process messages used by the dialog */
+!     if (s_findrep_hwnd != NULL && pIsDialogMessage(s_findrep_hwnd, &msg))
+      {
+  	HandleMouseHide(msg.message, msg.lParam);
+  	return;
+***************
+*** 1928,1934 ****
+      if (vk != VK_F10 || check_map(k10, State, FALSE, TRUE, FALSE,
+  							  NULL, NULL) == NULL)
+  #endif
+! 	DispatchMessage(&msg);
+  }
+  
+  /*
+--- 1928,1934 ----
+      if (vk != VK_F10 || check_map(k10, State, FALSE, TRUE, FALSE,
+  							  NULL, NULL) == NULL)
+  #endif
+! 	pDispatchMessage(&msg);
+  }
+  
+  /*
+***************
+*** 1943,1949 ****
+      MSG	    msg;
+  
+      if (!s_busy_processing)
+! 	while (PeekMessage(&msg, NULL, 0, 0, PM_NOREMOVE)
+  						  && !vim_is_input_buf_full())
+  	    process_message();
+  }
+--- 1943,1949 ----
+      MSG	    msg;
+  
+      if (!s_busy_processing)
+! 	while (pPeekMessage(&msg, NULL, 0, 0, PM_NOREMOVE)
+  						  && !vim_is_input_buf_full())
+  	    process_message();
+  }
+***************
+*** 2019,2025 ****
+  		KillTimer(NULL, s_wait_timer);
+  
+  		/* Eat spurious WM_TIMER messages */
+! 		while (PeekMessage(&msg, s_hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  		    ;
+  		s_wait_timer = 0;
+  	    }
+--- 2019,2025 ----
+  		KillTimer(NULL, s_wait_timer);
+  
+  		/* Eat spurious WM_TIMER messages */
+! 		while (pPeekMessage(&msg, s_hwnd, WM_TIMER, WM_TIMER, PM_REMOVE))
+  		    ;
+  		s_wait_timer = 0;
+  	    }
+*** ../vim-7.3.276/src/os_mswin.c	2011-06-19 01:30:01.000000000 +0200
+--- src/os_mswin.c	2011-08-10 16:45:24.000000000 +0200
+***************
+*** 1856,1867 ****
+  {
+      MSG msg;
+  
+!     while (!*bUserAbort && PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
+      {
+! 	if (!hDlgPrint || !IsDialogMessage(hDlgPrint, &msg))
+  	{
+  	    TranslateMessage(&msg);
+! 	    DispatchMessage(&msg);
+  	}
+      }
+      return !*bUserAbort;
+--- 1856,1867 ----
+  {
+      MSG msg;
+  
+!     while (!*bUserAbort && pPeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
+      {
+! 	if (!hDlgPrint || !pIsDialogMessage(hDlgPrint, &msg))
+  	{
+  	    TranslateMessage(&msg);
+! 	    pDispatchMessage(&msg);
+  	}
+      }
+      return !*bUserAbort;
+***************
+*** 3132,3141 ****
+  {
+      MSG msg;
+  
+!     while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
+      {
+  	TranslateMessage(&msg);
+! 	DispatchMessage(&msg);
+      }
+  }
+  
+--- 3132,3141 ----
+  {
+      MSG msg;
+  
+!     while (pPeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
+      {
+  	TranslateMessage(&msg);
+! 	pDispatchMessage(&msg);
+      }
+  }
+  
+*** ../vim-7.3.276/src/os_win32.c	2011-07-07 16:20:45.000000000 +0200
+--- src/os_win32.c	2011-08-10 16:54:50.000000000 +0200
+***************
+*** 152,157 ****
+--- 152,165 ----
+  # define wcsicmp(a, b) wcscmpi((a), (b))
+  #endif
+  
++ /* Enable common dialogs input unicode from IME if posible. */
++ #ifdef FEAT_MBYTE
++ LRESULT (WINAPI *pDispatchMessage)(LPMSG) = DispatchMessage;
++ BOOL (WINAPI *pGetMessage)(LPMSG, HWND, UINT, UINT) = GetMessage;
++ BOOL (WINAPI *pIsDialogMessage)(HWND, LPMSG) = IsDialogMessage;
++ BOOL (WINAPI *pPeekMessage)(LPMSG, HWND, UINT, UINT, UINT) = PeekMessage;
++ #endif
++ 
+  #ifndef FEAT_GUI_W32
+  /* Win32 Console handles for input and output */
+  static HANDLE g_hConIn  = INVALID_HANDLE_VALUE;
+***************
+*** 3284,3293 ****
+  	{
+  	    MSG	msg;
+  
+! 	    if (PeekMessage(&msg, (HWND)NULL, 0, 0, PM_REMOVE))
+  	    {
+  		TranslateMessage(&msg);
+! 		DispatchMessage(&msg);
+  	    }
+  	    if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
+  		break;
+--- 3292,3301 ----
+  	{
+  	    MSG	msg;
+  
+! 	    if (pPeekMessage(&msg, (HWND)NULL, 0, 0, PM_REMOVE))
+  	    {
+  		TranslateMessage(&msg);
+! 		pDispatchMessage(&msg);
+  	    }
+  	    if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
+  		break;
+*** ../vim-7.3.276/src/os_win32.h	2011-05-05 18:31:54.000000000 +0200
+--- src/os_win32.h	2011-08-10 16:51:58.000000000 +0200
+***************
+*** 193,195 ****
+--- 193,209 ----
+  #else
+  # define vim_mkdir(x, y) mch_mkdir(x)
+  #endif
++ 
++ /* Enable common dialogs input unicode from IME if posible. */
++ #ifdef FEAT_MBYTE
++     /* The variables are defined in os_win32.c. */
++ extern LRESULT (WINAPI *pDispatchMessage)(LPMSG);
++ extern BOOL (WINAPI *pGetMessage)(LPMSG, HWND, UINT, UINT);
++ extern BOOL (WINAPI *pIsDialogMessage)(HWND, LPMSG);
++ extern BOOL (WINAPI *pPeekMessage)(LPMSG, HWND, UINT, UINT, UINT);
++ #else
++ # define pDispatchMessage DispatchMessage
++ # define pGetMessage GetMessage
++ # define pIsDialogMessage IsDialogMessage
++ # define pPeekMessage PeekMessage
++ #endif
+*** ../vim-7.3.276/src/version.c	2011-08-10 16:31:18.000000000 +0200
+--- src/version.c	2011-08-10 17:06:55.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     277,
+  /**/
+
+-- 
+Veni, Vidi, VW -- I came, I saw, I drove around in a little car.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.278 b/source/ap/vim/patches/7.3.278
new file mode 100644
index 00000000..60bc0ac8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.278
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.278
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.278
+Problem:    Passing the file name to open in VisVim doesn't work.
+Solution:   Adjust the index and check for end of buffer. (Jiri Sedlak)
+Files:	    src/VisVim/Commands.cpp
+
+
+*** ../vim-7.3.277/src/VisVim/Commands.cpp	2010-08-15 21:57:27.000000000 +0200
+--- src/VisVim/Commands.cpp	2011-08-10 17:21:27.000000000 +0200
+***************
+*** 549,555 ****
+  	if (g_bNewTabs)
+  	{
+  		sprintf(VimCmd, ":tab drop ");
+! 		s = VimCmd + 11;
+  	}
+  	else
+  	{
+--- 549,555 ----
+  	if (g_bNewTabs)
+  	{
+  		sprintf(VimCmd, ":tab drop ");
+! 		s = VimCmd + 10;
+  	}
+  	else
+  	{
+***************
+*** 557,564 ****
+  		s = VimCmd + 6;
+  	}
+  	sprintf(FileNameTmp, "%S", (char *)FileName);
+! 	for (p = FileNameTmp; *p != '\0' && s < FileNameTmp + MAX_OLE_STR - 4;
+! 									  ++p)
+  		if (*p == '\\')
+  			*s++ = '/';
+  		else
+--- 557,563 ----
+  		s = VimCmd + 6;
+  	}
+  	sprintf(FileNameTmp, "%S", (char *)FileName);
+! 	for (p = FileNameTmp; *p != '\0' && s < VimCmd + MAX_OLE_STR - 4; ++p)
+  		if (*p == '\\')
+  			*s++ = '/';
+  		else
+*** ../vim-7.3.277/src/version.c	2011-08-10 17:07:56.000000000 +0200
+--- src/version.c	2011-08-10 17:25:20.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     278,
+  /**/
+
+-- 
+ARTHUR:          But if he was dying, he wouldn't bother to carve
+                 "Aaaaarrrrrrggghhh".  He'd just say it.
+BROTHER MAYNARD: It's down there carved in stone.
+GALAHAD:         Perhaps he was dictating.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.279 b/source/ap/vim/patches/7.3.279
new file mode 100644
index 00000000..6a8814b6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.279
@@ -0,0 +1,118 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.279
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.279
+Problem:    With GTK, when gvim is full-screen and a tab is opened and using a
+	    specific monitor configuration the window is too big.
+Solution:   Adjust the window size like on MS-Windows. (Yukihiro Nakadaira)
+Files:	    src/gui.c, src/gui_gtk_x11.c, src/proto/gui_gtk_x11.pro
+
+
+*** ../vim-7.3.278/src/gui.c	2011-06-26 04:48:56.000000000 +0200
+--- src/gui.c	2011-08-10 17:40:31.000000000 +0200
+***************
+*** 1407,1413 ****
+      if (!gui.shell_created)
+  	return;
+  
+! #ifdef MSWIN
+      /* If not setting to a user specified size and maximized, calculate the
+       * number of characters that fit in the maximized window. */
+      if (!mustset && gui_mch_maximized())
+--- 1407,1413 ----
+      if (!gui.shell_created)
+  	return;
+  
+! #if defined(MSWIN) || defined(FEAT_GUI_GTK)
+      /* If not setting to a user specified size and maximized, calculate the
+       * number of characters that fit in the maximized window. */
+      if (!mustset && gui_mch_maximized())
+*** ../vim-7.3.278/src/gui_gtk_x11.c	2011-06-26 04:48:56.000000000 +0200
+--- src/gui_gtk_x11.c	2011-08-10 17:42:19.000000000 +0200
+***************
+*** 3900,3905 ****
+--- 3900,3920 ----
+  }
+  
+  /*
++  * Called when the font changed while the window is maximized.  Compute the
++  * new Rows and Columns.  This is like resizing the window.
++  */
++     void
++ gui_mch_newfont()
++ {
++     int w, h;
++ 
++     gtk_window_get_size(GTK_WINDOW(gui.mainwin), &w, &h);
++     w -= get_menu_tool_width();
++     h -= get_menu_tool_height();
++     gui_resize_shell(w, h);
++ }
++ 
++ /*
+   * Set the windows size.
+   */
+      void
+***************
+*** 4409,4422 ****
+  
+      if (gui_mch_maximized())
+      {
+- 	int w, h;
+- 
+  	/* Update lines and columns in accordance with the new font, keep the
+  	 * window maximized. */
+! 	gtk_window_get_size(GTK_WINDOW(gui.mainwin), &w, &h);
+! 	w -= get_menu_tool_width();
+! 	h -= get_menu_tool_height();
+! 	gui_resize_shell(w, h);
+      }
+      else
+      {
+--- 4424,4432 ----
+  
+      if (gui_mch_maximized())
+      {
+  	/* Update lines and columns in accordance with the new font, keep the
+  	 * window maximized. */
+! 	gui_mch_newfont();
+      }
+      else
+      {
+*** ../vim-7.3.278/src/proto/gui_gtk_x11.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/gui_gtk_x11.pro	2011-08-10 17:42:29.000000000 +0200
+***************
+*** 20,25 ****
+--- 20,26 ----
+  void gui_mch_set_winpos __ARGS((int x, int y));
+  int gui_mch_maximized __ARGS((void));
+  void gui_mch_unmaximize __ARGS((void));
++ void gui_mch_newfont __ARGS((void));
+  void gui_mch_set_shellsize __ARGS((int width, int height, int min_width, int min_height, int base_width, int base_height, int direction));
+  void gui_mch_get_screen_dimensions __ARGS((int *screen_w, int *screen_h));
+  void gui_mch_settitle __ARGS((char_u *title, char_u *icon));
+*** ../vim-7.3.278/src/version.c	2011-08-10 17:25:48.000000000 +0200
+--- src/version.c	2011-08-10 17:43:22.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     279,
+  /**/
+
+-- 
+LAUNCELOT: Isn't there a St. Aaaaarrrrrrggghhh's in Cornwall?
+ARTHUR:    No, that's Saint Ives.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.280 b/source/ap/vim/patches/7.3.280
new file mode 100644
index 00000000..1c1387ae
--- /dev/null
+++ b/source/ap/vim/patches/7.3.280
@@ -0,0 +1,181 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.280
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.280
+Problem:    ":lmake" does not update the quickfix window title.
+Solution:   Update the title. (Lech Lorens)
+Files:	    src/quickfix.c, src/testdir/test10.in, src/testdir/test10.ok
+
+
+*** ../vim-7.3.279/src/quickfix.c	2011-08-10 13:21:30.000000000 +0200
+--- src/quickfix.c	2011-08-10 18:09:19.000000000 +0200
+***************
+*** 126,131 ****
+--- 126,132 ----
+  static win_T	*qf_find_win __ARGS((qf_info_T *qi));
+  static buf_T	*qf_find_buf __ARGS((qf_info_T *qi));
+  static void	qf_update_buffer __ARGS((qf_info_T *qi));
++ static void	qf_set_title __ARGS((qf_info_T *qi));
+  static void	qf_fill_buffer __ARGS((qf_info_T *qi));
+  #endif
+  static char_u	*get_mef_name __ARGS((void));
+***************
+*** 2388,2395 ****
+      qf_fill_buffer(qi);
+  
+      if (qi->qf_lists[qi->qf_curlist].qf_title != NULL)
+! 	set_internal_string_var((char_u *)"w:quickfix_title",
+! 				       qi->qf_lists[qi->qf_curlist].qf_title);
+  
+      curwin->w_cursor.lnum = qi->qf_lists[qi->qf_curlist].qf_index;
+      curwin->w_cursor.col = 0;
+--- 2389,2395 ----
+      qf_fill_buffer(qi);
+  
+      if (qi->qf_lists[qi->qf_curlist].qf_title != NULL)
+! 	qf_set_title(qi);
+  
+      curwin->w_cursor.lnum = qi->qf_lists[qi->qf_curlist].qf_index;
+      curwin->w_cursor.col = 0;
+***************
+*** 2526,2531 ****
+--- 2526,2533 ----
+      qf_info_T	*qi;
+  {
+      buf_T	*buf;
++     win_T	*win;
++     win_T	*curwin_save;
+      aco_save_T	aco;
+  
+      /* Check if a buffer for the quickfix list exists.  Update it. */
+***************
+*** 2537,2542 ****
+--- 2539,2554 ----
+  
+  	qf_fill_buffer(qi);
+  
++ 	if (qi->qf_lists[qi->qf_curlist].qf_title != NULL
++ 	    && (win = qf_find_win(qi)) != NULL)
++ 	{
++ 	    curwin_save = curwin;
++ 	    curwin = win;
++ 	    qf_set_title(qi);
++ 	    curwin = curwin_save;
++ 
++ 	}
++ 
+  	/* restore curwin/curbuf and a few other things */
+  	aucmd_restbuf(&aco);
+  
+***************
+*** 2544,2549 ****
+--- 2556,2569 ----
+      }
+  }
+  
++     static void
++ qf_set_title(qi)
++     qf_info_T	*qi;
++ {
++     set_internal_string_var((char_u *)"w:quickfix_title",
++ 				    qi->qf_lists[qi->qf_curlist].qf_title);
++ }
++ 
+  /*
+   * Fill current buffer with quickfix errors, replacing any previous contents.
+   * curbuf must be the quickfix buffer!
+*** ../vim-7.3.279/src/testdir/test10.in	2011-08-10 13:21:30.000000000 +0200
+--- src/testdir/test10.in	2011-08-10 18:28:31.000000000 +0200
+***************
+*** 5,13 ****
+  :" Also test a BOM is ignored.
+  :so mbyte.vim
+  :set encoding=utf-8
+! :/start of errorfile/,/end of errorfile/w! Xerrorfile
+  :/start of testfile/,/end of testfile/w! Xtestfile
+! :cf Xerrorfile
+  rA
+  :cn
+  rB
+--- 5,20 ----
+  :" Also test a BOM is ignored.
+  :so mbyte.vim
+  :set encoding=utf-8
+! :7/start of errorfile/,/end of errorfile/w! Xerrorfile1
+! :7/start of errorfile/,/end of errorfile/-1w! Xerrorfile2
+  :/start of testfile/,/end of testfile/w! Xtestfile
+! :cf Xerrorfile2
+! :clast
+! :copen
+! :let a=w:quickfix_title
+! :wincmd p
+! gR=a

+! :cf Xerrorfile1
+  rA
+  :cn
+  rB
+***************
+*** 17,22 ****
+--- 24,34 ----
+  rD
+  :cn
+  rE
++ :cn
++ :wincmd w
++ :let a=w:quickfix_title
++ :wincmd p
++ gR=a

+  :w! test.out             " Write contents of this file
+  :qa!
+  ENDTEST
+***************
+*** 33,38 ****
+--- 45,52 ----
+  "Xtestfile", linenr 19: yet another problem
+  
+  Does anyone know what is the problem and how to correction it?
++ "Xtestfile", line 21 col 9: What is the title of the quickfix window?
++ "Xtestfile", line 22 col 9: What is the title of the quickfix window?
+  end of errorfile
+  
+  start of testfile
+*** ../vim-7.3.279/src/testdir/test10.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test10.ok	2011-08-10 18:03:53.000000000 +0200
+***************
+*** 18,23 ****
+  line 18 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  Eine 19 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  line 20 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 21 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 22 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  end of testfile
+--- 18,23 ----
+  line 18 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  Eine 19 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  line 20 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 21 :cf Xerrorfile1xxxxxxxxxxxxxxx
+! line 22 :cf Xerrorfile2xxxxxxxxxxxxxxx
+  end of testfile
+*** ../vim-7.3.279/src/version.c	2011-08-10 17:44:41.000000000 +0200
+--- src/version.c	2011-08-10 18:35:52.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     280,
+  /**/
+
+-- 
+"When I die, I want a tombstone that says "GAME OVER" - Ton Richters
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.281 b/source/ap/vim/patches/7.3.281
new file mode 100644
index 00000000..f90e95e1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.281
@@ -0,0 +1,134 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.281
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.281
+Problem:    After using "expand('%:8')" the buffer name is changed.
+Solution:   Make a copy of the file name before shortening it.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.280/src/eval.c	2011-08-10 12:38:02.000000000 +0200
+--- src/eval.c	2011-08-17 15:12:39.000000000 +0200
+***************
+*** 23205,23210 ****
+--- 23205,23211 ----
+      int		c;
+      int		has_fullname = 0;
+  #ifdef WIN3264
++     char_u	*fname_start = *fnamep;
+      int		has_shortname = 0;
+  #endif
+  
+***************
+*** 23379,23402 ****
+      }
+  
+  #ifdef WIN3264
+!     /* Check shortname after we have done 'heads' and before we do 'tails'
+       */
+      if (has_shortname)
+      {
+! 	pbuf = NULL;
+! 	/* Copy the string if it is shortened by :h */
+! 	if (*fnamelen < (int)STRLEN(*fnamep))
+  	{
+  	    p = vim_strnsave(*fnamep, *fnamelen);
+! 	    if (p == 0)
+  		return -1;
+  	    vim_free(*bufp);
+  	    *bufp = *fnamep = p;
+  	}
+  
+  	/* Split into two implementations - makes it easier.  First is where
+! 	 * there isn't a full name already, second is where there is.
+! 	 */
+  	if (!has_fullname && !vim_isAbsName(*fnamep))
+  	{
+  	    if (shortpath_for_partial(fnamep, bufp, fnamelen) == FAIL)
+--- 23380,23404 ----
+      }
+  
+  #ifdef WIN3264
+!     /*
+!      * Handle ":8" after we have done 'heads' and before we do 'tails'.
+       */
+      if (has_shortname)
+      {
+! 	/* Copy the string if it is shortened by :h and when it wasn't copied
+! 	 * yet, because we are going to change it in place.  Avoids changing
+! 	 * the buffer name for "%:8". */
+! 	if (*fnamelen < (int)STRLEN(*fnamep) || *fnamep == fname_start)
+  	{
+  	    p = vim_strnsave(*fnamep, *fnamelen);
+! 	    if (p == NULL)
+  		return -1;
+  	    vim_free(*bufp);
+  	    *bufp = *fnamep = p;
+  	}
+  
+  	/* Split into two implementations - makes it easier.  First is where
+! 	 * there isn't a full name already, second is where there is. */
+  	if (!has_fullname && !vim_isAbsName(*fnamep))
+  	{
+  	    if (shortpath_for_partial(fnamep, bufp, fnamelen) == FAIL)
+***************
+*** 23404,23421 ****
+  	}
+  	else
+  	{
+! 	    int		l;
+  
+! 	    /* Simple case, already have the full-name
+  	     * Nearly always shorter, so try first time. */
+- 	    l = *fnamelen;
+  	    if (get_short_pathname(fnamep, bufp, &l) == FAIL)
+  		return -1;
+  
+  	    if (l == 0)
+  	    {
+! 		/* Couldn't find the filename.. search the paths.
+! 		 */
+  		l = *fnamelen;
+  		if (shortpath_for_invalid_fname(fnamep, bufp, &l) == FAIL)
+  		    return -1;
+--- 23406,23421 ----
+  	}
+  	else
+  	{
+! 	    int		l = *fnamelen;
+  
+! 	    /* Simple case, already have the full-name.
+  	     * Nearly always shorter, so try first time. */
+  	    if (get_short_pathname(fnamep, bufp, &l) == FAIL)
+  		return -1;
+  
+  	    if (l == 0)
+  	    {
+! 		/* Couldn't find the filename, search the paths. */
+  		l = *fnamelen;
+  		if (shortpath_for_invalid_fname(fnamep, bufp, &l) == FAIL)
+  		    return -1;
+*** ../vim-7.3.280/src/version.c	2011-08-10 18:36:49.000000000 +0200
+--- src/version.c	2011-08-17 15:21:41.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     281,
+  /**/
+
+-- 
+Kisses may last for as much as, but no more than, five minutes.
+		[real standing law in Iowa, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.282 b/source/ap/vim/patches/7.3.282
new file mode 100644
index 00000000..dcd16806
--- /dev/null
+++ b/source/ap/vim/patches/7.3.282
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.282
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.282
+Problem:    When using input() and :echo in a loop the displayed text is
+	    incorrect. (Benjamin Fritz)
+Solution:   Only restore the cursor position when there is a command line.
+	    (Ben Schmidt)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.281/src/ex_getln.c	2011-07-27 17:58:42.000000000 +0200
+--- src/ex_getln.c	2011-08-17 15:57:39.000000000 +0200
+***************
+*** 1969,1976 ****
+  # endif
+      s = getcmdline(firstc, 1L, 0);
+      restore_cmdline(&save_ccline);
+!     /* Restore msg_col, the prompt from input() may have changed it. */
+!     msg_col = msg_col_save;
+  
+      return s;
+  }
+--- 1969,1980 ----
+  # endif
+      s = getcmdline(firstc, 1L, 0);
+      restore_cmdline(&save_ccline);
+!     /* Restore msg_col, the prompt from input() may have changed it.
+!      * But only if called recursively and the commandline is therefore being
+!      * restored to an old one; if not, the input() prompt stays on the screen,
+!      * so we need its modified msg_col left intact. */
+!     if (ccline.cmdbuff != NULL)
+! 	msg_col = msg_col_save;
+  
+      return s;
+  }
+*** ../vim-7.3.281/src/version.c	2011-08-17 15:23:16.000000000 +0200
+--- src/version.c	2011-08-17 16:24:04.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     282,
+  /**/
+
+-- 
+Why don't cannibals eat clowns?
+Because they taste funny.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.283 b/source/ap/vim/patches/7.3.283
new file mode 100644
index 00000000..1a3a6358
--- /dev/null
+++ b/source/ap/vim/patches/7.3.283
@@ -0,0 +1,114 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.283
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.283
+Problem:    An expression mapping with a multi-byte character containing a
+	    0x80 byte gets messed up. (ZyX)
+Solution:   Unescape the expression before evaluating it (Yukihiro Nakadaira)
+Files:	    src/getchar.c
+
+
+*** ../vim-7.3.282/src/getchar.c	2011-04-28 17:30:05.000000000 +0200
+--- src/getchar.c	2011-08-17 17:04:38.000000000 +0200
+***************
+*** 3262,3270 ****
+      validate_maphash();
+  
+      /*
+!      * find end of keys and skip CTRL-Vs (and backslashes) in it
+       * Accept backslash like CTRL-V when 'cpoptions' does not contain 'B'.
+!      * with :unmap white space is included in the keys, no argument possible
+       */
+      p = keys;
+      do_backslash = (vim_strchr(p_cpo, CPO_BSLASH) == NULL);
+--- 3262,3270 ----
+      validate_maphash();
+  
+      /*
+!      * Find end of keys and skip CTRL-Vs (and backslashes) in it.
+       * Accept backslash like CTRL-V when 'cpoptions' does not contain 'B'.
+!      * with :unmap white space is included in the keys, no argument possible.
+       */
+      p = keys;
+      do_backslash = (vim_strchr(p_cpo, CPO_BSLASH) == NULL);
+***************
+*** 4506,4517 ****
+--- 4506,4528 ----
+  {
+      char_u	*res;
+      char_u	*p;
++     char_u	*expr;
+      char_u	*save_cmd;
+      pos_T	save_cursor;
+  
++     /* Remove escaping of CSI, because "str" is in a format to be used as
++      * typeahead. */
++     expr = vim_strsave(str);
++     if (expr == NULL)
++ 	return NULL;
++     vim_unescape_csi(expr);
++ 
+      save_cmd = save_cmdline_alloc();
+      if (save_cmd == NULL)
++     {
++ 	vim_free(expr);
+  	return NULL;
++     }
+  
+      /* Forbid changing text or using ":normal" to avoid most of the bad side
+       * effects.  Also restore the cursor position. */
+***************
+*** 4521,4527 ****
+  #endif
+      set_vim_var_char(c);  /* set v:char to the typed character */
+      save_cursor = curwin->w_cursor;
+!     p = eval_to_string(str, NULL, FALSE);
+      --textlock;
+  #ifdef FEAT_EX_EXTRA
+      --ex_normal_lock;
+--- 4532,4538 ----
+  #endif
+      set_vim_var_char(c);  /* set v:char to the typed character */
+      save_cursor = curwin->w_cursor;
+!     p = eval_to_string(expr, NULL, FALSE);
+      --textlock;
+  #ifdef FEAT_EX_EXTRA
+      --ex_normal_lock;
+***************
+*** 4529,4536 ****
+--- 4540,4550 ----
+      curwin->w_cursor = save_cursor;
+  
+      restore_cmdline_alloc(save_cmd);
++     vim_free(expr);
++ 
+      if (p == NULL)
+  	return NULL;
++     /* Escape CSI in the result to be able to use the string as typeahead. */
+      res = vim_strsave_escape_csi(p);
+      vim_free(p);
+  
+*** ../vim-7.3.282/src/version.c	2011-08-17 16:25:43.000000000 +0200
+--- src/version.c	2011-08-17 17:17:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     283,
+  /**/
+
+-- 
+bashian roulette:
+$ ((RANDOM%6)) || rm -rf ~
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.284 b/source/ap/vim/patches/7.3.284
new file mode 100644
index 00000000..c621ced6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.284
@@ -0,0 +1,211 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.284
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.284
+Problem:    The str2special() function doesn't handle multi-byte characters
+	    properly.
+Solution:   Recognize multi-byte characters. (partly by Vladimir Vichniakov)
+Files:	    src/getchar.c, src/message.c, src/misc2.c
+
+
+*** ../vim-7.3.283/src/getchar.c	2011-08-17 17:18:14.000000000 +0200
+--- src/getchar.c	2011-08-17 20:11:58.000000000 +0200
+***************
+*** 3964,3970 ****
+      if (*mp->m_str == NUL)
+  	msg_puts_attr((char_u *)"<Nop>", hl_attr(HLF_8));
+      else
+! 	msg_outtrans_special(mp->m_str, FALSE);
+  #ifdef FEAT_EVAL
+      if (p_verbose > 0)
+  	last_set_msg(mp->m_script_ID);
+--- 3964,3980 ----
+      if (*mp->m_str == NUL)
+  	msg_puts_attr((char_u *)"<Nop>", hl_attr(HLF_8));
+      else
+!     {
+! 	/* Remove escaping of CSI, because "m_str" is in a format to be used
+! 	 * as typeahead. */
+! 	char_u *s = vim_strsave(mp->m_str);
+! 	if (s != NULL)
+! 	{
+! 	    vim_unescape_csi(s);
+! 	    msg_outtrans_special(s, FALSE);
+! 	    vim_free(s);
+! 	}
+!     }
+  #ifdef FEAT_EVAL
+      if (p_verbose > 0)
+  	last_set_msg(mp->m_script_ID);
+*** ../vim-7.3.283/src/message.c	2011-03-22 13:07:19.000000000 +0100
+--- src/message.c	2011-08-17 18:40:10.000000000 +0200
+***************
+*** 1547,1562 ****
+  	if (IS_SPECIAL(c) || modifiers)	/* special key */
+  	    special = TRUE;
+      }
+-     *sp = str + 1;
+  
+  #ifdef FEAT_MBYTE
+!     /* For multi-byte characters check for an illegal byte. */
+!     if (has_mbyte && MB_BYTE2LEN(*str) > (*mb_ptr2len)(str))
+      {
+! 	transchar_nonprint(buf, c);
+! 	return buf;
+      }
+  #endif
+  
+      /* Make unprintable characters in <> form, also <M-Space> and <Tab>.
+       * Use <Space> only for lhs of a mapping. */
+--- 1547,1573 ----
+  	if (IS_SPECIAL(c) || modifiers)	/* special key */
+  	    special = TRUE;
+      }
+  
+  #ifdef FEAT_MBYTE
+!     if (has_mbyte && !IS_SPECIAL(c))
+      {
+!         int len = (*mb_ptr2len)(str);
+! 
+! 	/* For multi-byte characters check for an illegal byte. */
+! 	if (has_mbyte && MB_BYTE2LEN(*str) > len)
+! 	{
+! 	    transchar_nonprint(buf, c);
+! 	    *sp = str + 1;
+! 	    return buf;
+! 	}
+!         /* Since 'special' is TRUE the multi-byte character 'c' will be
+!          * processed by get_special_key_name() */
+!         c = (*mb_ptr2char)(str);
+!         *sp = str + len;
+      }
++     else
+  #endif
++ 	*sp = str + 1;
+  
+      /* Make unprintable characters in <> form, also <M-Space> and <Tab>.
+       * Use <Space> only for lhs of a mapping. */
+*** ../vim-7.3.283/src/misc2.c	2011-07-27 17:31:42.000000000 +0200
+--- src/misc2.c	2011-08-17 20:27:30.000000000 +0200
+***************
+*** 2754,2759 ****
+--- 2754,2760 ----
+      int		bit;
+      int		key;
+      unsigned long n;
++     int		l;
+  
+      src = *srcp;
+      if (src[0] != '<')
+***************
+*** 2766,2773 ****
+  	if (*bp == '-')
+  	{
+  	    last_dash = bp;
+! 	    if (bp[1] != NUL && bp[2] == '>')
+! 		++bp;	/* anything accepted, like <C-?> */
+  	}
+  	if (bp[0] == 't' && bp[1] == '_' && bp[2] && bp[3])
+  	    bp += 3;	/* skip t_xx, xx may be '-' or '>' */
+--- 2767,2783 ----
+  	if (*bp == '-')
+  	{
+  	    last_dash = bp;
+! 	    if (bp[1] != NUL)
+! 	    {
+! #ifdef FEAT_MBYTE
+! 		if (has_mbyte)
+! 		    l = mb_ptr2len(bp + 1);
+! 		else
+! #endif
+! 		    l = 1;
+! 		if (bp[l + 1] == '>')
+! 		    bp += l;	/* anything accepted, like <C-?> */
+! 	    }
+  	}
+  	if (bp[0] == 't' && bp[1] == '_' && bp[2] && bp[3])
+  	    bp += 3;	/* skip t_xx, xx may be '-' or '>' */
+***************
+*** 2777,2791 ****
+      {
+  	end_of_name = bp + 1;
+  
+- 	if (STRNICMP(src + 1, "char-", 5) == 0 && VIM_ISDIGIT(src[6]))
+- 	{
+- 	    /* <Char-123> or <Char-033> or <Char-0x33> */
+- 	    vim_str2nr(src + 6, NULL, NULL, TRUE, TRUE, NULL, &n);
+- 	    *modp = 0;
+- 	    *srcp = end_of_name;
+- 	    return (int)n;
+- 	}
+- 
+  	/* Which modifiers are given? */
+  	modifiers = 0x0;
+  	for (bp = src + 1; bp < last_dash; bp++)
+--- 2787,2792 ----
+***************
+*** 2804,2814 ****
+  	 */
+  	if (bp >= last_dash)
+  	{
+  	    /*
+  	     * Modifier with single letter, or special key name.
+  	     */
+! 	    if (modifiers != 0 && last_dash[2] == '>')
+! 		key = last_dash[1];
+  	    else
+  	    {
+  		key = get_special_key_code(last_dash + 1);
+--- 2805,2831 ----
+  	 */
+  	if (bp >= last_dash)
+  	{
++ 	    if (STRNICMP(last_dash + 1, "char-", 5) == 0
++ 						 && VIM_ISDIGIT(last_dash[6]))
++ 	    {
++ 		/* <Char-123> or <Char-033> or <Char-0x33> */
++ 		vim_str2nr(last_dash + 6, NULL, NULL, TRUE, TRUE, NULL, &n);
++ 		*modp = modifiers;
++ 		*srcp = end_of_name;
++ 		return (int)n;
++ 	    }
++ 
+  	    /*
+  	     * Modifier with single letter, or special key name.
+  	     */
+! #ifdef FEAT_MBYTE
+! 	    if (has_mbyte)
+! 		l = mb_ptr2len(last_dash + 1);
+! 	    else
+! #endif
+! 		l = 1;
+! 	    if (modifiers != 0 && last_dash[l + 1] == '>')
+! 		key = PTR2CHAR(last_dash + 1);
+  	    else
+  	    {
+  		key = get_special_key_code(last_dash + 1);
+*** ../vim-7.3.283/src/version.c	2011-08-17 17:18:14.000000000 +0200
+--- src/version.c	2011-08-17 20:27:47.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     284,
+  /**/
+
+-- 
+Snoring is prohibited unless all bedroom windows are closed and securely
+locked.
+		[real standing law in Massachusetts, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.285 b/source/ap/vim/patches/7.3.285
new file mode 100644
index 00000000..24be28bc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.285
@@ -0,0 +1,144 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.285
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.285 (after 7.3.284)
+Problem:    Mapping <Char-123> no longer works.
+Solution:   Properly check for "char-".  Add a test for it.
+Files:	    src/misc2.c, src/testdir/test75.in, src/testdir/test75.ok
+
+
+*** ../vim-7.3.284/src/misc2.c	2011-08-17 20:33:18.000000000 +0200
+--- src/misc2.c	2011-08-19 22:08:37.000000000 +0200
+***************
+*** 2781,2786 ****
+--- 2781,2792 ----
+  	}
+  	if (bp[0] == 't' && bp[1] == '_' && bp[2] && bp[3])
+  	    bp += 3;	/* skip t_xx, xx may be '-' or '>' */
++ 	else if (STRNICMP(bp, "char-", 5) == 0)
++ 	{
++ 	    vim_str2nr(bp + 5, NULL, &l, TRUE, TRUE, NULL, NULL);
++ 	    bp += l + 5;
++ 	    break;
++ 	}
+      }
+  
+      if (*bp == '>')	/* found matching '>' */
+***************
+*** 2810,2836 ****
+  	    {
+  		/* <Char-123> or <Char-033> or <Char-0x33> */
+  		vim_str2nr(last_dash + 6, NULL, NULL, TRUE, TRUE, NULL, &n);
+! 		*modp = modifiers;
+! 		*srcp = end_of_name;
+! 		return (int)n;
+  	    }
+- 
+- 	    /*
+- 	     * Modifier with single letter, or special key name.
+- 	     */
+- #ifdef FEAT_MBYTE
+- 	    if (has_mbyte)
+- 		l = mb_ptr2len(last_dash + 1);
+- 	    else
+- #endif
+- 		l = 1;
+- 	    if (modifiers != 0 && last_dash[l + 1] == '>')
+- 		key = PTR2CHAR(last_dash + 1);
+  	    else
+  	    {
+! 		key = get_special_key_code(last_dash + 1);
+! 		if (!keep_x_key)
+! 		    key = handle_x_keys(key);
+  	    }
+  
+  	    /*
+--- 2816,2842 ----
+  	    {
+  		/* <Char-123> or <Char-033> or <Char-0x33> */
+  		vim_str2nr(last_dash + 6, NULL, NULL, TRUE, TRUE, NULL, &n);
+! 		key = (int)n;
+  	    }
+  	    else
+  	    {
+! 		/*
+! 		 * Modifier with single letter, or special key name.
+! 		 */
+! #ifdef FEAT_MBYTE
+! 		if (has_mbyte)
+! 		    l = mb_ptr2len(last_dash + 1);
+! 		else
+! #endif
+! 		    l = 1;
+! 		if (modifiers != 0 && last_dash[l + 1] == '>')
+! 		    key = PTR2CHAR(last_dash + 1);
+! 		else
+! 		{
+! 		    key = get_special_key_code(last_dash + 1);
+! 		    if (!keep_x_key)
+! 			key = handle_x_keys(key);
+! 		}
+  	    }
+  
+  	    /*
+*** ../vim-7.3.284/src/testdir/test75.in	2010-10-20 21:22:17.000000000 +0200
+--- src/testdir/test75.in	2011-08-19 22:05:13.000000000 +0200
+***************
+*** 2,7 ****
+--- 2,8 ----
+  
+  STARTTEST
+  :so small.vim
++ :set cpo-=<
+  :" Test maparg() with a string result
+  :map foo<C-V> is<F4>foo
+  :vnoremap <script> <buffer> <expr> <silent> bar isbar
+***************
+*** 9,14 ****
+--- 10,20 ----
+  :call append('$', string(maparg('foo<C-V>', '', 0, 1)))
+  :call append('$', string(maparg('bar', '', 0, 1)))
+  :"
++ :map abc x<char-114>x
++ :call append('$', maparg('abc'))
++ :map abc y<S-char-114>y
++ :call append('$', maparg('abc'))
++ :"
+  :/^eof/+1,$w! test.out
+  :qa!
+  ENDTEST
+*** ../vim-7.3.284/src/testdir/test75.ok	2010-10-20 21:22:17.000000000 +0200
+--- src/testdir/test75.ok	2011-08-19 21:53:26.000000000 +0200
+***************
+*** 1,3 ****
+--- 1,5 ----
+  is<F4>foo
+  {'silent': 0, 'noremap': 0, 'lhs': 'foo<C-V>', 'mode': ' ', 'expr': 0, 'sid': 0, 'rhs': 'is<F4>foo', 'buffer': 0}
+  {'silent': 1, 'noremap': 1, 'lhs': 'bar', 'mode': 'v', 'expr': 1, 'sid': 0, 'rhs': 'isbar', 'buffer': 1}
++ xrx
++ yRy
+*** ../vim-7.3.284/src/version.c	2011-08-17 20:33:18.000000000 +0200
+--- src/version.c	2011-08-19 22:15:22.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     285,
+  /**/
+
+
+-- 
+No man may purchase alcohol without written consent from his wife.
+		[real standing law in Pennsylvania, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.286 b/source/ap/vim/patches/7.3.286
new file mode 100644
index 00000000..308d5105
--- /dev/null
+++ b/source/ap/vim/patches/7.3.286
@@ -0,0 +1,84 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.286
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.286
+Problem:    Crash when using "zd" on a large number of folds. (Sam King)
+Solution:   Recompute pointer after reallocating array.  Move fewer entries
+	    when making room.
+Files:	    src/fold.c
+
+
+*** ../vim-7.3.285/src/fold.c	2010-08-15 21:57:27.000000000 +0200
+--- src/fold.c	2011-08-26 16:03:56.000000000 +0200
+***************
+*** 1469,1479 ****
+      }
+      else
+      {
+! 	/* move nested folds one level up, to overwrite the fold that is
+  	 * deleted. */
+  	moved = fp->fd_nested.ga_len;
+  	if (ga_grow(gap, (int)(moved - 1)) == OK)
+  	{
+  	    /* adjust fd_top and fd_flags for the moved folds */
+  	    nfp = (fold_T *)fp->fd_nested.ga_data;
+  	    for (i = 0; i < moved; ++i)
+--- 1469,1482 ----
+      }
+      else
+      {
+! 	/* Move nested folds one level up, to overwrite the fold that is
+  	 * deleted. */
+  	moved = fp->fd_nested.ga_len;
+  	if (ga_grow(gap, (int)(moved - 1)) == OK)
+  	{
++ 	    /* Get "fp" again, the array may have been reallocated. */
++ 	    fp = (fold_T *)gap->ga_data + idx;
++ 
+  	    /* adjust fd_top and fd_flags for the moved folds */
+  	    nfp = (fold_T *)fp->fd_nested.ga_data;
+  	    for (i = 0; i < moved; ++i)
+***************
+*** 1486,1494 ****
+  	    }
+  
+  	    /* move the existing folds down to make room */
+! 	    if (idx < gap->ga_len)
+  		mch_memmove(fp + moved, fp + 1,
+! 					sizeof(fold_T) * (gap->ga_len - idx));
+  	    /* move the contained folds one level up */
+  	    mch_memmove(fp, nfp, (size_t)(sizeof(fold_T) * moved));
+  	    vim_free(nfp);
+--- 1489,1497 ----
+  	    }
+  
+  	    /* move the existing folds down to make room */
+! 	    if (idx + 1 < gap->ga_len)
+  		mch_memmove(fp + moved, fp + 1,
+! 				  sizeof(fold_T) * (gap->ga_len - (idx + 1)));
+  	    /* move the contained folds one level up */
+  	    mch_memmove(fp, nfp, (size_t)(sizeof(fold_T) * moved));
+  	    vim_free(nfp);
+*** ../vim-7.3.285/src/version.c	2011-08-19 22:28:58.000000000 +0200
+--- src/version.c	2011-08-26 16:07:59.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     286,
+  /**/
+
+-- 
+To keep milk from turning sour: Keep it in the cow.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.287 b/source/ap/vim/patches/7.3.287
new file mode 100644
index 00000000..5c6da035
--- /dev/null
+++ b/source/ap/vim/patches/7.3.287
@@ -0,0 +1,100 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.287
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.287
+Problem:    Can't compile with MSVC and tiny options.
+Solution:   Move variables and #ifdefs. (Sergey Khorev)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.286/src/os_win32.c	2011-08-10 17:07:56.000000000 +0200
+--- src/os_win32.c	2011-08-27 15:07:28.000000000 +0200
+***************
+*** 3419,3426 ****
+  {
+      DWORD	availableBytes = 0;
+      DWORD	i;
+-     int		c;
+-     char_u	*p;
+      int		ret;
+      DWORD	len;
+      DWORD	toRead;
+--- 3419,3424 ----
+***************
+*** 3479,3484 ****
+--- 3477,3484 ----
+  	else if (has_mbyte)
+  	{
+  	    int		l;
++ 	    int		c;
++ 	    char_u	*p;
+  
+  	    len += *buffer_off;
+  	    buffer[len] = NUL;
+***************
+*** 3558,3566 ****
+      int		noread_cnt = 0;
+      garray_T	ga;
+      int	    delay = 1;
+- # ifdef FEAT_MBYTE
+      DWORD	buffer_off = 0;	/* valid bytes in buffer[] */
+- # endif
+  
+      SECURITY_ATTRIBUTES saAttr;
+  
+--- 3558,3564 ----
+***************
+*** 3777,3790 ****
+  
+  	if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
+  	{
+! 	    dump_pipe(options, g_hChildStd_OUT_Rd,
+! 			&ga, buffer, &buffer_off);
+  	    break;
+  	}
+  
+  	++noread_cnt;
+! 	dump_pipe(options, g_hChildStd_OUT_Rd,
+! 		    &ga, buffer, &buffer_off);
+  
+  	/* We start waiting for a very short time and then increase it, so
+  	 * that we respond quickly when the process is quick, and don't
+--- 3775,3786 ----
+  
+  	if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
+  	{
+! 	    dump_pipe(options, g_hChildStd_OUT_Rd, &ga, buffer, &buffer_off);
+  	    break;
+  	}
+  
+  	++noread_cnt;
+! 	dump_pipe(options, g_hChildStd_OUT_Rd, &ga, buffer, &buffer_off);
+  
+  	/* We start waiting for a very short time and then increase it, so
+  	 * that we respond quickly when the process is quick, and don't
+*** ../vim-7.3.286/src/version.c	2011-08-26 16:12:55.000000000 +0200
+--- src/version.c	2011-08-27 15:08:27.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     287,
+  /**/
+
+-- 
+SUPERIMPOSE "England AD 787".  After a few more seconds we hear hoofbeats in
+the distance.  They come slowly closer.  Then out of the mist comes KING
+ARTHUR followed by a SERVANT who is banging two half coconuts together.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.288 b/source/ap/vim/patches/7.3.288
new file mode 100644
index 00000000..d1f66268
--- /dev/null
+++ b/source/ap/vim/patches/7.3.288
@@ -0,0 +1,76 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.288
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.288
+Problem:    has('python') may give an error message for not being able to load
+	    the library after using python3.
+Solution:   Only give the error when the verbose argument is true.
+Files:	    src/if_python.c, src/if_python3.c
+
+
+*** ../vim-7.3.287/src/if_python.c	2011-06-19 00:27:46.000000000 +0200
+--- src/if_python.c	2011-08-21 17:03:52.000000000 +0200
+***************
+*** 368,374 ****
+       * standard C extension libraries of one or both python versions. */
+      if (python3_loaded())
+      {
+! 	EMSG(_("E836: This Vim cannot execute :python after using :py3"));
+  	return FAIL;
+      }
+  #endif
+--- 368,375 ----
+       * standard C extension libraries of one or both python versions. */
+      if (python3_loaded())
+      {
+! 	if (verbose)
+! 	    EMSG(_("E836: This Vim cannot execute :python after using :py3"));
+  	return FAIL;
+      }
+  #endif
+*** ../vim-7.3.287/src/if_python3.c	2011-07-15 15:54:39.000000000 +0200
+--- src/if_python3.c	2011-08-21 17:05:19.000000000 +0200
+***************
+*** 367,373 ****
+       * standard C extension libraries of one or both python versions. */
+      if (python_loaded())
+      {
+! 	EMSG(_("E837: This Vim cannot execute :py3 after using :python"));
+  	return FAIL;
+      }
+  # endif
+--- 367,374 ----
+       * standard C extension libraries of one or both python versions. */
+      if (python_loaded())
+      {
+! 	if (verbose)
+! 	    EMSG(_("E837: This Vim cannot execute :py3 after using :python"));
+  	return FAIL;
+      }
+  # endif
+*** ../vim-7.3.287/src/version.c	2011-08-27 15:10:00.000000000 +0200
+--- src/version.c	2011-08-28 15:59:11.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     288,
+  /**/
+
+-- 
+FIRST SOLDIER:  So they wouldn't be able to bring a coconut back anyway.
+SECOND SOLDIER: Wait a minute! Suppose two swallows carried it together?
+FIRST SOLDIER:  No, they'd have to have it on a line.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.289 b/source/ap/vim/patches/7.3.289
new file mode 100644
index 00000000..30258e42
--- /dev/null
+++ b/source/ap/vim/patches/7.3.289
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.289
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.289
+Problem:    Complete function isn't called when the leader changed.
+Solution:   Call ins_compl_restart() when the leader changed.  (Taro Muraoka)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.288/src/edit.c	2011-05-19 17:25:36.000000000 +0200
+--- src/edit.c	2011-08-28 15:53:47.000000000 +0200
+***************
+*** 3367,3372 ****
+--- 3367,3381 ----
+      ins_bytes(compl_leader + ins_compl_len());
+      compl_used_match = FALSE;
+  
++ #ifdef FEAT_COMPL_FUNC
++     /*
++      * To call eval 'completefunc' when leader is changed, restart completion
++      * every time.
++      */
++     if (ctrl_x_mode == CTRL_X_FUNCTION || ctrl_x_mode == CTRL_X_OMNI)
++         ins_compl_restart();
++ #endif
++ 
+      if (compl_started)
+  	ins_compl_set_original_text(compl_leader);
+      else
+*** ../vim-7.3.288/src/version.c	2011-08-28 16:00:14.000000000 +0200
+--- src/version.c	2011-08-28 16:01:22.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     289,
+  /**/
+
+-- 
+THEOREM: VI is perfect.
+PROOF: VI in roman numerals is 6.  The natural numbers < 6 which divide 6 are
+1, 2, and 3. 1+2+3 = 6.  So 6 is a perfect number.  Therefore, VI is perfect.
+QED
+						    -- Arthur Tateishi
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.290 b/source/ap/vim/patches/7.3.290
new file mode 100644
index 00000000..b50cacfc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.290
@@ -0,0 +1,75 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.290
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.290
+Problem:    When a BufWriteCmd autocommand resets 'modified' this doesn't
+	    change older buffer states to be marked as 'modified' like
+	    ":write" does.  (Yukihiro Nakadaira)
+Solution:   When the BufWriteCmd resets 'modified' then adjust the undo
+	    information like ":write" does.
+Files:	    src/fileio.c
+
+
+*** ../vim-7.3.289/src/fileio.c	2011-07-20 18:29:33.000000000 +0200
+--- src/fileio.c	2011-08-29 21:49:27.000000000 +0200
+***************
+*** 3342,3349 ****
+  	}
+  	else if (reset_changed && whole)
+  	{
+! 	    if (!(did_cmd = apply_autocmds_exarg(EVENT_BUFWRITECMD,
+! 					 sfname, sfname, FALSE, curbuf, eap)))
+  	    {
+  #ifdef FEAT_QUICKFIX
+  		if (overwriting && bt_nofile(curbuf))
+--- 3342,3363 ----
+  	}
+  	else if (reset_changed && whole)
+  	{
+! 	    int was_changed = curbufIsChanged();
+! 
+! 	    did_cmd = apply_autocmds_exarg(EVENT_BUFWRITECMD,
+! 					  sfname, sfname, FALSE, curbuf, eap);
+! 	    if (did_cmd)
+! 	    {
+! 		if (was_changed && !curbufIsChanged())
+! 		{
+! 		    /* Written everything correctly and BufWriteCmd has reset
+! 		     * 'modified': Correct the undo information so that an
+! 		     * undo now sets 'modified'. */
+! 		    u_unchanged(curbuf);
+! 		    u_update_save_nr(curbuf);
+! 		}
+! 	    }
+! 	    else
+  	    {
+  #ifdef FEAT_QUICKFIX
+  		if (overwriting && bt_nofile(curbuf))
+*** ../vim-7.3.289/src/version.c	2011-08-28 16:02:23.000000000 +0200
+--- src/version.c	2011-09-02 11:37:25.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     290,
+  /**/
+
+-- 
+OLD WOMAN: Well, how did you become king, then?
+ARTHUR: The Lady of the Lake, her arm clad in the purest shimmering samite,
+        held Excalibur aloft from the bosom of the water to signify by Divine
+        Providence ...  that I, Arthur, was to carry Excalibur ...  That is
+        why I am your king!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.291 b/source/ap/vim/patches/7.3.291
new file mode 100644
index 00000000..1d394e4c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.291
@@ -0,0 +1,125 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.291
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.291
+Problem:    Configure doesn't work properly with Python3.
+Solution:   Put -ldl before $LDFLAGS. Add PY3_NO_RTLD_GLOBAL. (Roland
+	    Puntaier)
+Files:	    src/config.h.in, src/auto/configure, src/configure.in
+
+
+*** ../vim-7.3.290/src/config.h.in	2010-10-27 16:49:41.000000000 +0200
+--- src/config.h.in	2011-09-02 11:22:21.000000000 +0200
+***************
+*** 346,351 ****
+--- 346,354 ----
+  /* Define if dynamic python does not require RTLD_GLOBAL */
+  #undef PY_NO_RTLD_GLOBAL
+  
++ /* Define if dynamic python3 does not require RTLD_GLOBAL */
++ #undef PY3_NO_RTLD_GLOBAL
++ 
+  /* Define if you want to include the Ruby interpreter. */
+  #undef FEAT_RUBY
+  
+*** ../vim-7.3.290/src/auto/configure	2011-07-15 13:09:46.000000000 +0200
+--- src/auto/configure	2011-09-02 11:23:15.000000000 +0200
+***************
+*** 5733,5739 ****
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   LDFLAGS="$LDFLAGS -ldl"
+    if test "$cross_compiling" = yes; then :
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+  $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+--- 5733,5739 ----
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON_CFLAGS"
+    ldflags_save=$LDFLAGS
+!     LDFLAGS="-ldl $LDFLAGS"
+    if test "$cross_compiling" = yes; then :
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+  $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+***************
+*** 5798,5804 ****
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON3_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   LDFLAGS="$LDFLAGS -ldl"
+    if test "$cross_compiling" = yes; then :
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+  $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+--- 5798,5804 ----
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON3_CFLAGS"
+    ldflags_save=$LDFLAGS
+!     LDFLAGS="-ldl $LDFLAGS"
+    if test "$cross_compiling" = yes; then :
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+  $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+*** ../vim-7.3.290/src/configure.in	2011-07-15 13:09:46.000000000 +0200
+--- src/configure.in	2011-09-02 11:19:51.000000000 +0200
+***************
+*** 1161,1167 ****
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   LDFLAGS="$LDFLAGS -ldl"
+    AC_RUN_IFELSE([
+      #include <dlfcn.h>
+      /* If this program fails, then RTLD_GLOBAL is needed.
+--- 1161,1168 ----
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   dnl -ldl must go first to make this work on Archlinux (Roland Puntaier)
+!   LDFLAGS="-ldl $LDFLAGS"
+    AC_RUN_IFELSE([
+      #include <dlfcn.h>
+      /* If this program fails, then RTLD_GLOBAL is needed.
+***************
+*** 1205,1211 ****
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON3_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   LDFLAGS="$LDFLAGS -ldl"
+    AC_RUN_IFELSE([
+      #include <dlfcn.h>
+      #include <wchar.h>
+--- 1206,1213 ----
+    cflags_save=$CFLAGS
+    CFLAGS="$CFLAGS $PYTHON3_CFLAGS"
+    ldflags_save=$LDFLAGS
+!   dnl -ldl must go first to make this work on Archlinux (Roland Puntaier)
+!   LDFLAGS="-ldl $LDFLAGS"
+    AC_RUN_IFELSE([
+      #include <dlfcn.h>
+      #include <wchar.h>
+*** ../vim-7.3.290/src/version.c	2011-09-02 11:56:15.000000000 +0200
+--- src/version.c	2011-09-02 12:25:13.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     291,
+  /**/
+
+-- 
+DENNIS: Look,  strange women lying on their backs in ponds handing out
+        swords ... that's no basis for a system of government.  Supreme
+        executive power derives from a mandate from the masses, not from some
+        farcical aquatic ceremony.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.292 b/source/ap/vim/patches/7.3.292
new file mode 100644
index 00000000..fc9480fe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.292
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.292
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.292
+Problem:    Crash when using fold markers and selecting a visual block that
+	    includes a folded line and goes to end of line. (Sam Lidder)
+Solution:   Check for the column to be MAXCOL. (James Vega)
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.291/src/screen.c	2011-08-10 14:32:33.000000000 +0200
+--- src/screen.c	2011-09-02 13:58:18.000000000 +0200
+***************
+*** 2531,2537 ****
+  		/* Visual block mode: highlight the chars part of the block */
+  		if (wp->w_old_cursor_fcol + txtcol < (colnr_T)W_WIDTH(wp))
+  		{
+! 		    if (wp->w_old_cursor_lcol + txtcol < (colnr_T)W_WIDTH(wp))
+  			len = wp->w_old_cursor_lcol;
+  		    else
+  			len = W_WIDTH(wp) - txtcol;
+--- 2531,2539 ----
+  		/* Visual block mode: highlight the chars part of the block */
+  		if (wp->w_old_cursor_fcol + txtcol < (colnr_T)W_WIDTH(wp))
+  		{
+! 		    if (wp->w_old_cursor_lcol != MAXCOL
+! 			     && wp->w_old_cursor_lcol + txtcol
+! 						       < (colnr_T)W_WIDTH(wp))
+  			len = wp->w_old_cursor_lcol;
+  		    else
+  			len = W_WIDTH(wp) - txtcol;
+*** ../vim-7.3.291/src/version.c	2011-09-02 12:27:20.000000000 +0200
+--- src/version.c	2011-09-02 14:00:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     292,
+  /**/
+
+-- 
+Hacker: Someone skilled in computer programming (good guy).
+Cracker: A hacker that uses his skills to crack software (bad guy).
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.293 b/source/ap/vim/patches/7.3.293
new file mode 100644
index 00000000..4072e32f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.293
@@ -0,0 +1,74 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.293
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.293
+Problem:    MSVC compiler has a problem with non-ASCII characters.
+Solution:   Avoid non-ASCII characters. (Hong Xu)
+Files:	    src/ascii.h, src/spell.c
+
+
+*** ../vim-7.3.292/src/ascii.h	2011-05-10 16:41:13.000000000 +0200
+--- src/ascii.h	2011-09-02 14:12:48.000000000 +0200
+***************
+*** 123,129 ****
+  #define DCS		0x90	/* Device Control String */
+  #define STERM		0x9c	/* String Terminator */
+  
+! #define POUND		'£'
+  
+  #define CTRL_F_STR	"\056"
+  #define CTRL_H_STR	"\026"
+--- 123,129 ----
+  #define DCS		0x90	/* Device Control String */
+  #define STERM		0x9c	/* String Terminator */
+  
+! #define POUND		'\xA3'
+  
+  #define CTRL_F_STR	"\056"
+  #define CTRL_H_STR	"\026"
+*** ../vim-7.3.292/src/spell.c	2011-04-11 21:35:03.000000000 +0200
+--- src/spell.c	2011-09-02 14:13:30.000000000 +0200
+***************
+*** 11197,11203 ****
+  	    c = *s++;
+  
+  #ifdef FEAT_MBYTE
+! 	/* We only change ß to SS when we are certain latin1 is used.  It
+  	 * would cause weird errors in other 8-bit encodings. */
+  	if (enc_latin1like && c == 0xdf)
+  	{
+--- 11197,11203 ----
+  	    c = *s++;
+  
+  #ifdef FEAT_MBYTE
+! 	/* We only change 0xdf to SS when we are certain latin1 is used.  It
+  	 * would cause weird errors in other 8-bit encodings. */
+  	if (enc_latin1like && c == 0xdf)
+  	{
+*** ../vim-7.3.292/src/version.c	2011-09-02 14:07:31.000000000 +0200
+--- src/version.c	2011-09-02 14:13:57.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     293,
+  /**/
+
+-- 
+   A village.  Sound of chanting of Latin canon, punctuated by short, sharp
+   cracks.  It comes nearer.  We see it is a line of MONKS ala SEVENTH SEAL
+   flagellation scene, chanting and banging themselves on the foreheads with
+   wooden boards.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.294 b/source/ap/vim/patches/7.3.294
new file mode 100644
index 00000000..84252ba3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.294
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.294
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.294 (after 7.3.289)
+Problem:    Patch 289 causes more problems than it solves.
+Solution:   Rever the patch untill a better solution is found.
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.293/src/edit.c	2011-08-28 16:02:23.000000000 +0200
+--- src/edit.c	2011-09-05 20:07:49.000000000 +0200
+***************
+*** 3367,3381 ****
+      ins_bytes(compl_leader + ins_compl_len());
+      compl_used_match = FALSE;
+  
+- #ifdef FEAT_COMPL_FUNC
+-     /*
+-      * To call eval 'completefunc' when leader is changed, restart completion
+-      * every time.
+-      */
+-     if (ctrl_x_mode == CTRL_X_FUNCTION || ctrl_x_mode == CTRL_X_OMNI)
+-         ins_compl_restart();
+- #endif
+- 
+      if (compl_started)
+  	ins_compl_set_original_text(compl_leader);
+      else
+--- 3367,3372 ----
+*** ../vim-7.3.293/src/version.c	2011-09-02 14:18:14.000000000 +0200
+--- src/version.c	2011-09-05 20:08:27.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     294,
+  /**/
+
+-- 
+Scientists decoded the first message from an alien civilization:
+        SIMPLY SEND 6 TIMES 10 TO THE 50 ATOMS OF HYDROGEN TO THE STAR
+SYSTEM AT THE TOP OF THE LIST, CROSS OFF THAT STAR SYSTEM, THEN PUT
+YOUR STAR SYSTEM AT THE BOTTOM OF THE LIST AND SEND IT TO 100 OTHER
+STAR SYSTEMS.  WITHIN ONE TENTH GALACTIC ROTATION YOU WILL RECEIVE
+ENOUGH HYDROGREN TO POWER YOUR CIVILIZATION UNTIL ENTROPY REACHES ITS
+MAXIMUM!  IT REALLY WORKS!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.295 b/source/ap/vim/patches/7.3.295
new file mode 100644
index 00000000..fad7ea3e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.295
@@ -0,0 +1,109 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.295
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.295
+Problem:    When filtering text with an external command Vim may not read all
+	    the output.
+Solution:   When select() is interrupted loop and try again. (James Vega)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.294/src/os_unix.c	2011-08-04 20:31:50.000000000 +0200
+--- src/os_unix.c	2011-09-07 13:34:09.000000000 +0200
+***************
+*** 4819,4825 ****
+  
+  /*
+   * Wait "msec" msec until a character is available from file descriptor "fd".
+!  * Time == -1 will block forever.
+   * When a GUI is being used, this will not be used for input -- webb
+   * Returns also, when a request from Sniff is waiting -- toni.
+   * Or when a Linux GPM mouse event is waiting.
+--- 4819,4826 ----
+  
+  /*
+   * Wait "msec" msec until a character is available from file descriptor "fd".
+!  * "msec" == 0 will check for characters once.
+!  * "msec" == -1 will block until a character is available.
+   * When a GUI is being used, this will not be used for input -- webb
+   * Returns also, when a request from Sniff is waiting -- toni.
+   * Or when a Linux GPM mouse event is waiting.
+***************
+*** 5057,5063 ****
+  	/*
+  	 * Select on ready for reading and exceptional condition (end of file).
+  	 */
+! 	FD_ZERO(&rfds); /* calls bzero() on a sun */
+  	FD_ZERO(&efds);
+  	FD_SET(fd, &rfds);
+  # if !defined(__QNX__) && !defined(__CYGWIN32__)
+--- 5058,5065 ----
+  	/*
+  	 * Select on ready for reading and exceptional condition (end of file).
+  	 */
+! select_eintr:
+! 	FD_ZERO(&rfds);
+  	FD_ZERO(&efds);
+  	FD_SET(fd, &rfds);
+  # if !defined(__QNX__) && !defined(__CYGWIN32__)
+***************
+*** 5117,5122 ****
+--- 5119,5132 ----
+  # else
+  	ret = select(maxfd + 1, &rfds, NULL, &efds, tvp);
+  # endif
++ # ifdef EINTR
++ 	if (ret == -1 && errno == EINTR)
++ 	    /* Interrupted by a signal, need to try again.  We ignore msec
++ 	     * here, because we do want to check even after a timeout if
++ 	     * characters are available.  Needed for reading output of an
++ 	     * external command after the process has finished. */
++ 	    goto select_eintr;
++ # endif
+  # ifdef __TANDEM
+  	if (ret == -1 && errno == ENOTSUP)
+  	{
+***************
+*** 5124,5130 ****
+  	    FD_ZERO(&efds);
+  	    ret = 0;
+  	}
+! #endif
+  # ifdef FEAT_MZSCHEME
+  	if (ret == 0 && mzquantum_used)
+  	    /* loop if MzThreads must be scheduled and timeout occurred */
+--- 5134,5140 ----
+  	    FD_ZERO(&efds);
+  	    ret = 0;
+  	}
+! # endif
+  # ifdef FEAT_MZSCHEME
+  	if (ret == 0 && mzquantum_used)
+  	    /* loop if MzThreads must be scheduled and timeout occurred */
+*** ../vim-7.3.294/src/version.c	2011-09-05 20:13:37.000000000 +0200
+--- src/version.c	2011-09-07 14:05:05.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     295,
+  /**/
+
+-- 
+"You're fired." (1980)
+"You're laid off." (1985)
+"You're downsized." (1990)
+"You're rightsized." (1992)
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.296 b/source/ap/vim/patches/7.3.296
new file mode 100644
index 00000000..80369d1a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.296
@@ -0,0 +1,222 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.296
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.296
+Problem:    When writing to an external command a zombie process may be left
+	    behind.
+Solution:   Wait on the process. (James Vega)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.295/src/os_unix.c	2011-09-07 14:06:38.000000000 +0200
+--- src/os_unix.c	2011-09-07 14:54:11.000000000 +0200
+***************
+*** 154,159 ****
+--- 154,166 ----
+  
+  static void may_core_dump __ARGS((void));
+  
++ #ifdef HAVE_UNION_WAIT
++ typedef union wait waitstatus;
++ #else
++ typedef int waitstatus;
++ #endif
++ static int  wait4pid __ARGS((pid_t, waitstatus *));
++ 
+  static int  WaitForChar __ARGS((long));
+  #if defined(__BEOS__)
+  int  RealWaitForChar __ARGS((int, long, int *));
+***************
+*** 3660,3665 ****
+--- 3667,3713 ----
+      /* Nothing to do. */
+  }
+  
++ /*
++  * Wait for process "child" to end.
++  * Return "child" if it exited properly, <= 0 on error.
++  */
++     static pid_t
++ wait4pid(child, status)
++     pid_t	child;
++     waitstatus	*status;
++ {
++     pid_t wait_pid = 0;
++ 
++     while (wait_pid != child)
++     {
++ # ifdef _THREAD_SAFE
++ 	/* Ugly hack: when compiled with Python threads are probably
++ 	 * used, in which case wait() sometimes hangs for no obvious
++ 	 * reason.  Use waitpid() instead and loop (like the GUI). */
++ #  ifdef __NeXT__
++ 	wait_pid = wait4(child, status, WNOHANG, (struct rusage *)0);
++ #  else
++ 	wait_pid = waitpid(child, status, WNOHANG);
++ #  endif
++ 	if (wait_pid == 0)
++ 	{
++ 	    /* Wait for 1/100 sec before trying again. */
++ 	    mch_delay(10L, TRUE);
++ 	    continue;
++ 	}
++ # else
++ 	wait_pid = wait(status);
++ # endif
++ 	if (wait_pid <= 0
++ # ifdef ECHILD
++ 		&& errno == ECHILD
++ # endif
++ 	   )
++ 	    break;
++     }
++     return wait_pid;
++ }
++ 
+      int
+  mch_call_shell(cmd, options)
+      char_u	*cmd;
+***************
+*** 4234,4240 ****
+  		    {
+  			MSG_PUTS(_("\nCannot fork\n"));
+  		    }
+! 		    else if (wpid == 0)
+  		    {
+  			linenr_T    lnum = curbuf->b_op_start.lnum;
+  			int	    written = 0;
+--- 4282,4288 ----
+  		    {
+  			MSG_PUTS(_("\nCannot fork\n"));
+  		    }
+! 		    else if (wpid == 0) /* child */
+  		    {
+  			linenr_T    lnum = curbuf->b_op_start.lnum;
+  			int	    written = 0;
+***************
+*** 4242,4248 ****
+  			char_u	    *s;
+  			size_t	    l;
+  
+- 			/* child */
+  			close(fromshell_fd);
+  			for (;;)
+  			{
+--- 4290,4295 ----
+***************
+*** 4287,4293 ****
+  			}
+  			_exit(0);
+  		    }
+! 		    else
+  		    {
+  			close(toshell_fd);
+  			toshell_fd = -1;
+--- 4334,4340 ----
+  			}
+  			_exit(0);
+  		    }
+! 		    else /* parent */
+  		    {
+  			close(toshell_fd);
+  			toshell_fd = -1;
+***************
+*** 4584,4590 ****
+  		     * typed characters (otherwise we would lose typeahead).
+  		     */
+  # ifdef __NeXT__
+! 		    wait_pid = wait4(pid, &status, WNOHANG, (struct rusage *) 0);
+  # else
+  		    wait_pid = waitpid(pid, &status, WNOHANG);
+  # endif
+--- 4631,4637 ----
+  		     * typed characters (otherwise we would lose typeahead).
+  		     */
+  # ifdef __NeXT__
+! 		    wait_pid = wait4(pid, &status, WNOHANG, (struct rusage *)0);
+  # else
+  		    wait_pid = waitpid(pid, &status, WNOHANG);
+  # endif
+***************
+*** 4633,4665 ****
+  	     * Don't wait if wait_pid was already set above, indicating the
+  	     * child already exited.
+  	     */
+! 	    while (wait_pid != pid)
+! 	    {
+! # ifdef _THREAD_SAFE
+! 		/* Ugly hack: when compiled with Python threads are probably
+! 		 * used, in which case wait() sometimes hangs for no obvious
+! 		 * reason.  Use waitpid() instead and loop (like the GUI). */
+! #  ifdef __NeXT__
+! 		wait_pid = wait4(pid, &status, WNOHANG, (struct rusage *)0);
+! #  else
+! 		wait_pid = waitpid(pid, &status, WNOHANG);
+! #  endif
+! 		if (wait_pid == 0)
+! 		{
+! 		    /* Wait for 1/100 sec before trying again. */
+! 		    mch_delay(10L, TRUE);
+! 		    continue;
+! 		}
+! # else
+! 		wait_pid = wait(&status);
+! # endif
+! 		if (wait_pid <= 0
+! # ifdef ECHILD
+! 			&& errno == ECHILD
+! # endif
+! 		   )
+! 		    break;
+! 	    }
+  
+  # ifdef FEAT_GUI
+  	    /* Close slave side of pty.  Only do this after the child has
+--- 4680,4687 ----
+  	     * Don't wait if wait_pid was already set above, indicating the
+  	     * child already exited.
+  	     */
+! 	    if (wait_pid != pid)
+! 		wait_pid = wait4pid(pid, &status);
+  
+  # ifdef FEAT_GUI
+  	    /* Close slave side of pty.  Only do this after the child has
+***************
+*** 4672,4678 ****
+--- 4694,4703 ----
+  	    /* Make sure the child that writes to the external program is
+  	     * dead. */
+  	    if (wpid > 0)
++ 	    {
+  		kill(wpid, SIGKILL);
++ 		wait4pid(wpid, NULL);
++ 	    }
+  
+  	    /*
+  	     * Set to raw mode right now, otherwise a CTRL-C after
+*** ../vim-7.3.295/src/version.c	2011-09-07 14:06:39.000000000 +0200
+--- src/version.c	2011-09-07 15:03:24.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     296,
+  /**/
+
+-- 
+If your company is not involved in something called "ISO 9000" you probably
+have no idea what it is.  If your company _is_ involved in ISO 9000 then you
+definitely have no idea what it is.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.297 b/source/ap/vim/patches/7.3.297
new file mode 100644
index 00000000..09be7684
--- /dev/null
+++ b/source/ap/vim/patches/7.3.297
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.297
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.297
+Problem:    Can't load Perl 5.14 dynamically.
+Solution:   Add code in #ifdefs. (Charles Cooper)
+Files:	    if_perl.xs
+
+
+*** ../vim-7.3.296/src/if_perl.xs	2011-07-27 14:15:41.000000000 +0200
+--- src/if_perl.xs	2011-09-07 18:47:07.000000000 +0200
+***************
+*** 147,153 ****
+--- 147,158 ----
+  # define Perl_save_int dll_Perl_save_int
+  # define Perl_stack_grow dll_Perl_stack_grow
+  # define Perl_set_context dll_Perl_set_context
++ # if (PERL_REVISION == 5) && (PERL_VERSION >= 14)
++ # define Perl_sv_2bool_flags dll_Perl_sv_2bool_flags
++ # define Perl_xs_apiversion_bootcheck dll_Perl_xs_apiversion_bootcheck 
++ # else
+  # define Perl_sv_2bool dll_Perl_sv_2bool
++ # endif
+  # define Perl_sv_2iv dll_Perl_sv_2iv
+  # define Perl_sv_2mortal dll_Perl_sv_2mortal
+  # if (PERL_REVISION == 5) && (PERL_VERSION >= 8)
+***************
+*** 252,258 ****
+--- 257,268 ----
+  static void (*Perl_save_int)(pTHX_ int*);
+  static SV** (*Perl_stack_grow)(pTHX_ SV**, SV**p, int);
+  static SV** (*Perl_set_context)(void*);
++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 14)
++ static bool (*Perl_sv_2bool_flags)(pTHX_ SV*, I32);
++ static void (*Perl_xs_apiversion_bootcheck)(pTHX_ SV *module, const char *api_p, STRLEN api_len);
++ #else
+  static bool (*Perl_sv_2bool)(pTHX_ SV*);
++ #endif
+  static IV (*Perl_sv_2iv)(pTHX_ SV*);
+  static SV* (*Perl_sv_2mortal)(pTHX_ SV*);
+  #if (PERL_REVISION == 5) && (PERL_VERSION >= 8)
+***************
+*** 360,366 ****
+--- 370,381 ----
+      {"Perl_save_int", (PERL_PROC*)&Perl_save_int},
+      {"Perl_stack_grow", (PERL_PROC*)&Perl_stack_grow},
+      {"Perl_set_context", (PERL_PROC*)&Perl_set_context},
++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 14)
++     {"Perl_sv_2bool_flags", (PERL_PROC*)&Perl_sv_2bool_flags},
++     {"Perl_xs_apiversion_bootcheck",(PERL_PROC*)&Perl_xs_apiversion_bootcheck},
++ #else
+      {"Perl_sv_2bool", (PERL_PROC*)&Perl_sv_2bool},
++ #endif
+      {"Perl_sv_2iv", (PERL_PROC*)&Perl_sv_2iv},
+      {"Perl_sv_2mortal", (PERL_PROC*)&Perl_sv_2mortal},
+  #if (PERL_REVISION == 5) && (PERL_VERSION >= 8)
+***************
+*** 407,412 ****
+--- 422,430 ----
+      {"Perl_sv_free2", (PERL_PROC*)&Perl_sv_free2},
+      {"Perl_sys_init", (PERL_PROC*)&Perl_sys_init},
+      {"Perl_sys_term", (PERL_PROC*)&Perl_sys_term},
++     {"Perl_call_list", (PERL_PROC*)&Perl_call_list},
++ # if (PERL_REVISION == 5) && (PERL_VERSION >= 14)
++ # else
+      {"Perl_ISv_ptr", (PERL_PROC*)&Perl_ISv_ptr},
+      {"Perl_Istack_max_ptr", (PERL_PROC*)&Perl_Istack_max_ptr},
+      {"Perl_Istack_base_ptr", (PERL_PROC*)&Perl_Istack_base_ptr},
+***************
+*** 418,432 ****
+      {"Perl_Imarkstack_max_ptr", (PERL_PROC*)&Perl_Imarkstack_max_ptr},
+      {"Perl_Istack_sp_ptr", (PERL_PROC*)&Perl_Istack_sp_ptr},
+      {"Perl_Iop_ptr", (PERL_PROC*)&Perl_Iop_ptr},
+-     {"Perl_call_list", (PERL_PROC*)&Perl_call_list},
+      {"Perl_Iscopestack_ix_ptr", (PERL_PROC*)&Perl_Iscopestack_ix_ptr},
+      {"Perl_Iunitcheckav_ptr", (PERL_PROC*)&Perl_Iunitcheckav_ptr},
+  #endif
+      {"Perl_Idefgv_ptr", (PERL_PROC*)&Perl_Idefgv_ptr},
+      {"Perl_Ierrgv_ptr", (PERL_PROC*)&Perl_Ierrgv_ptr},
+      {"Perl_Isv_yes_ptr", (PERL_PROC*)&Perl_Isv_yes_ptr},
+-     {"boot_DynaLoader", (PERL_PROC*)&boot_DynaLoader},
+      {"Perl_Gthr_key_ptr", (PERL_PROC*)&Perl_Gthr_key_ptr},
+      {"", NULL},
+  };
+  
+--- 436,453 ----
+      {"Perl_Imarkstack_max_ptr", (PERL_PROC*)&Perl_Imarkstack_max_ptr},
+      {"Perl_Istack_sp_ptr", (PERL_PROC*)&Perl_Istack_sp_ptr},
+      {"Perl_Iop_ptr", (PERL_PROC*)&Perl_Iop_ptr},
+      {"Perl_Iscopestack_ix_ptr", (PERL_PROC*)&Perl_Iscopestack_ix_ptr},
+      {"Perl_Iunitcheckav_ptr", (PERL_PROC*)&Perl_Iunitcheckav_ptr},
++ # endif
+  #endif
++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 14)
++ #else
+      {"Perl_Idefgv_ptr", (PERL_PROC*)&Perl_Idefgv_ptr},
+      {"Perl_Ierrgv_ptr", (PERL_PROC*)&Perl_Ierrgv_ptr},
+      {"Perl_Isv_yes_ptr", (PERL_PROC*)&Perl_Isv_yes_ptr},
+      {"Perl_Gthr_key_ptr", (PERL_PROC*)&Perl_Gthr_key_ptr},
++ #endif
++     {"boot_DynaLoader", (PERL_PROC*)&boot_DynaLoader},
+      {"", NULL},
+  };
+  
+*** ../vim-7.3.296/src/version.c	2011-09-07 15:04:26.000000000 +0200
+--- src/version.c	2011-09-07 18:45:28.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     297,
+  /**/
+
+-- 
+At some point in the project somebody will start whining about the need to
+determine the project "requirements".  This involves interviewing people who
+don't know what they want but, curiously, know exactly when they need it.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.298 b/source/ap/vim/patches/7.3.298
new file mode 100644
index 00000000..65a51aa0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.298
@@ -0,0 +1,167 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.298
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.298
+Problem:    Built-in colors are different from rgb.txt.
+Solution:   Adjust the color values. (Benjamin Haskell)
+Files:	    src/gui_photon.c, src/gui_w48.c
+
+
+*** ../vim-7.3.297/src/gui_photon.c	2011-08-10 12:19:00.000000000 +0200
+--- src/gui_photon.c	2011-09-07 18:55:09.000000000 +0200
+***************
+*** 2007,2014 ****
+      static GuiColourTable table[] =
+      {
+  	{"Black",	    RGB(0x00, 0x00, 0x00)},
+! 	{"DarkGray",	    RGB(0x80, 0x80, 0x80)},
+! 	{"DarkGrey",	    RGB(0x80, 0x80, 0x80)},
+  	{"Gray",	    RGB(0xC0, 0xC0, 0xC0)},
+  	{"Grey",	    RGB(0xC0, 0xC0, 0xC0)},
+  	{"LightGray",	    RGB(0xD3, 0xD3, 0xD3)},
+--- 2007,2014 ----
+      static GuiColourTable table[] =
+      {
+  	{"Black",	    RGB(0x00, 0x00, 0x00)},
+! 	{"DarkGray",	    RGB(0xA9, 0xA9, 0xA9)},
+! 	{"DarkGrey",	    RGB(0xA9, 0xA9, 0xA9)},
+  	{"Gray",	    RGB(0xC0, 0xC0, 0xC0)},
+  	{"Grey",	    RGB(0xC0, 0xC0, 0xC0)},
+  	{"LightGray",	    RGB(0xD3, 0xD3, 0xD3)},
+***************
+*** 2037,2055 ****
+  	{"LightRed",	    RGB(0xFF, 0xA0, 0xA0)},
+  	{"DarkBlue",	    RGB(0x00, 0x00, 0x80)},
+  	{"Blue",	    RGB(0x00, 0x00, 0xFF)},
+! 	{"LightBlue",	    RGB(0xA0, 0xA0, 0xFF)},
+  	{"DarkGreen",	    RGB(0x00, 0x80, 0x00)},
+  	{"Green",	    RGB(0x00, 0xFF, 0x00)},
+! 	{"LightGreen",	    RGB(0xA0, 0xFF, 0xA0)},
+  	{"DarkCyan",	    RGB(0x00, 0x80, 0x80)},
+  	{"Cyan",	    RGB(0x00, 0xFF, 0xFF)},
+! 	{"LightCyan",	    RGB(0xA0, 0xFF, 0xFF)},
+  	{"DarkMagenta",	    RGB(0x80, 0x00, 0x80)},
+  	{"Magenta",	    RGB(0xFF, 0x00, 0xFF)},
+  	{"LightMagenta",    RGB(0xFF, 0xA0, 0xFF)},
+  	{"Brown",	    RGB(0x80, 0x40, 0x40)},
+  	{"Yellow",	    RGB(0xFF, 0xFF, 0x00)},
+! 	{"LightYellow",	    RGB(0xFF, 0xFF, 0xA0)},
+  	{"SeaGreen",	    RGB(0x2E, 0x8B, 0x57)},
+  	{"Orange",	    RGB(0xFF, 0xA5, 0x00)},
+  	{"Purple",	    RGB(0xA0, 0x20, 0xF0)},
+--- 2037,2055 ----
+  	{"LightRed",	    RGB(0xFF, 0xA0, 0xA0)},
+  	{"DarkBlue",	    RGB(0x00, 0x00, 0x80)},
+  	{"Blue",	    RGB(0x00, 0x00, 0xFF)},
+! 	{"LightBlue",	    RGB(0xAD, 0xD8, 0xE6)},
+  	{"DarkGreen",	    RGB(0x00, 0x80, 0x00)},
+  	{"Green",	    RGB(0x00, 0xFF, 0x00)},
+! 	{"LightGreen",	    RGB(0x90, 0xEE, 0x90)},
+  	{"DarkCyan",	    RGB(0x00, 0x80, 0x80)},
+  	{"Cyan",	    RGB(0x00, 0xFF, 0xFF)},
+! 	{"LightCyan",	    RGB(0xE0, 0xFF, 0xFF)},
+  	{"DarkMagenta",	    RGB(0x80, 0x00, 0x80)},
+  	{"Magenta",	    RGB(0xFF, 0x00, 0xFF)},
+  	{"LightMagenta",    RGB(0xFF, 0xA0, 0xFF)},
+  	{"Brown",	    RGB(0x80, 0x40, 0x40)},
+  	{"Yellow",	    RGB(0xFF, 0xFF, 0x00)},
+! 	{"LightYellow",	    RGB(0xFF, 0xFF, 0xE0)},
+  	{"SeaGreen",	    RGB(0x2E, 0x8B, 0x57)},
+  	{"Orange",	    RGB(0xFF, 0xA5, 0x00)},
+  	{"Purple",	    RGB(0xA0, 0x20, 0xF0)},
+*** ../vim-7.3.297/src/gui_w48.c	2011-08-10 17:07:56.000000000 +0200
+--- src/gui_w48.c	2011-09-07 18:55:09.000000000 +0200
+***************
+*** 1411,1422 ****
+      static guicolor_tTable table[] =
+      {
+  	{"Black",		RGB(0x00, 0x00, 0x00)},
+! 	{"DarkGray",		RGB(0x80, 0x80, 0x80)},
+! 	{"DarkGrey",		RGB(0x80, 0x80, 0x80)},
+  	{"Gray",		RGB(0xC0, 0xC0, 0xC0)},
+  	{"Grey",		RGB(0xC0, 0xC0, 0xC0)},
+! 	{"LightGray",		RGB(0xE0, 0xE0, 0xE0)},
+! 	{"LightGrey",		RGB(0xE0, 0xE0, 0xE0)},
+  	{"Gray10",		RGB(0x1A, 0x1A, 0x1A)},
+  	{"Grey10",		RGB(0x1A, 0x1A, 0x1A)},
+  	{"Gray20",		RGB(0x33, 0x33, 0x33)},
+--- 1411,1422 ----
+      static guicolor_tTable table[] =
+      {
+  	{"Black",		RGB(0x00, 0x00, 0x00)},
+! 	{"DarkGray",		RGB(0xA9, 0xA9, 0xA9)},
+! 	{"DarkGrey",		RGB(0xA9, 0xA9, 0xA9)},
+  	{"Gray",		RGB(0xC0, 0xC0, 0xC0)},
+  	{"Grey",		RGB(0xC0, 0xC0, 0xC0)},
+! 	{"LightGray",		RGB(0xD3, 0xD3, 0xD3)},
+! 	{"LightGrey",		RGB(0xD3, 0xD3, 0xD3)},
+  	{"Gray10",		RGB(0x1A, 0x1A, 0x1A)},
+  	{"Grey10",		RGB(0x1A, 0x1A, 0x1A)},
+  	{"Gray20",		RGB(0x33, 0x33, 0x33)},
+***************
+*** 1441,1459 ****
+  	{"LightRed",		RGB(0xFF, 0xA0, 0xA0)},
+  	{"DarkBlue",		RGB(0x00, 0x00, 0x80)},
+  	{"Blue",		RGB(0x00, 0x00, 0xFF)},
+! 	{"LightBlue",		RGB(0xA0, 0xA0, 0xFF)},
+  	{"DarkGreen",		RGB(0x00, 0x80, 0x00)},
+  	{"Green",		RGB(0x00, 0xFF, 0x00)},
+! 	{"LightGreen",		RGB(0xA0, 0xFF, 0xA0)},
+  	{"DarkCyan",		RGB(0x00, 0x80, 0x80)},
+  	{"Cyan",		RGB(0x00, 0xFF, 0xFF)},
+! 	{"LightCyan",		RGB(0xA0, 0xFF, 0xFF)},
+  	{"DarkMagenta",		RGB(0x80, 0x00, 0x80)},
+  	{"Magenta",		RGB(0xFF, 0x00, 0xFF)},
+  	{"LightMagenta",	RGB(0xFF, 0xA0, 0xFF)},
+  	{"Brown",		RGB(0x80, 0x40, 0x40)},
+  	{"Yellow",		RGB(0xFF, 0xFF, 0x00)},
+! 	{"LightYellow",		RGB(0xFF, 0xFF, 0xA0)},
+  	{"DarkYellow",		RGB(0xBB, 0xBB, 0x00)},
+  	{"SeaGreen",		RGB(0x2E, 0x8B, 0x57)},
+  	{"Orange",		RGB(0xFF, 0xA5, 0x00)},
+--- 1441,1459 ----
+  	{"LightRed",		RGB(0xFF, 0xA0, 0xA0)},
+  	{"DarkBlue",		RGB(0x00, 0x00, 0x80)},
+  	{"Blue",		RGB(0x00, 0x00, 0xFF)},
+! 	{"LightBlue",		RGB(0xAD, 0xD8, 0xE6)},
+  	{"DarkGreen",		RGB(0x00, 0x80, 0x00)},
+  	{"Green",		RGB(0x00, 0xFF, 0x00)},
+! 	{"LightGreen",		RGB(0x90, 0xEE, 0x90)},
+  	{"DarkCyan",		RGB(0x00, 0x80, 0x80)},
+  	{"Cyan",		RGB(0x00, 0xFF, 0xFF)},
+! 	{"LightCyan",		RGB(0xE0, 0xFF, 0xFF)},
+  	{"DarkMagenta",		RGB(0x80, 0x00, 0x80)},
+  	{"Magenta",		RGB(0xFF, 0x00, 0xFF)},
+  	{"LightMagenta",	RGB(0xFF, 0xA0, 0xFF)},
+  	{"Brown",		RGB(0x80, 0x40, 0x40)},
+  	{"Yellow",		RGB(0xFF, 0xFF, 0x00)},
+! 	{"LightYellow",		RGB(0xFF, 0xFF, 0xE0)},
+  	{"DarkYellow",		RGB(0xBB, 0xBB, 0x00)},
+  	{"SeaGreen",		RGB(0x2E, 0x8B, 0x57)},
+  	{"Orange",		RGB(0xFF, 0xA5, 0x00)},
+*** ../vim-7.3.297/src/version.c	2011-09-07 18:47:19.000000000 +0200
+--- src/version.c	2011-09-07 18:55:27.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     298,
+  /**/
+
+-- 
+You can test a person's importance in the organization by asking how much RAM
+his computer has.  Anybody who knows the answer to that question is not a
+decision-maker.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.299 b/source/ap/vim/patches/7.3.299
new file mode 100644
index 00000000..4f755d90
--- /dev/null
+++ b/source/ap/vim/patches/7.3.299
@@ -0,0 +1,516 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.299
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.299
+Problem:    Source code not in Vim style.
+Solution:   Adjust the style. (Elias Diem)
+Files:	    src/gui_photon.c
+
+
+*** ../vim-7.3.298/src/gui_photon.c	2011-09-07 18:58:24.000000000 +0200
+--- src/gui_photon.c	2011-09-07 19:02:59.000000000 +0200
+***************
+*** 535,547 ****
+  				&src_taken,
+  				buf,
+  				6,
+! 				&dst_made );
+  
+! 			add_to_input_buf( buf, dst_made );
+  		    }
+  		    else
+  		    {
+! 			add_to_input_buf( string, len );
+  		    }
+  
+  		    return Pt_CONSUME;
+--- 535,547 ----
+  				&src_taken,
+  				buf,
+  				6,
+! 				&dst_made);
+  
+! 			add_to_input_buf(buf, dst_made);
+  		    }
+  		    else
+  		    {
+! 			add_to_input_buf(string, len);
+  		    }
+  
+  		    return Pt_CONSUME;
+***************
+*** 549,579 ****
+  		len = 0;
+  #endif
+  		ch = key->key_cap;
+! 		if( ch < 0xff )
+  		{
+  		    /* FIXME: is this the right thing to do? */
+! 		    if( modifiers & MOD_MASK_CTRL )
+  		    {
+  			modifiers &= ~MOD_MASK_CTRL;
+  
+! 			if( ( ch >= 'a'  &&  ch <= 'z' ) ||
+  				ch == '[' ||
+  				ch == ']' ||
+! 				ch == '\\' )
+! 			    ch = Ctrl_chr( ch );
+! 			else if( ch == '2' )
+  			    ch = NUL;
+! 			else if( ch == '6' )
+  			    ch = 0x1e;
+! 			else if( ch == '-' )
+  			    ch = 0x1f;
+  			else
+  			    modifiers |= MOD_MASK_CTRL;
+  		    }
+  
+! 		    if( modifiers & MOD_MASK_ALT )
+  		    {
+! 			ch = Meta( ch );
+  			modifiers &= ~MOD_MASK_ALT;
+  		    }
+  		}
+--- 549,579 ----
+  		len = 0;
+  #endif
+  		ch = key->key_cap;
+! 		if (ch < 0xff)
+  		{
+  		    /* FIXME: is this the right thing to do? */
+! 		    if (modifiers & MOD_MASK_CTRL)
+  		    {
+  			modifiers &= ~MOD_MASK_CTRL;
+  
+! 			if ((ch >= 'a' && ch <= 'z') ||
+  				ch == '[' ||
+  				ch == ']' ||
+! 				ch == '\\')
+! 			    ch = Ctrl_chr(ch);
+! 			else if (ch == '2')
+  			    ch = NUL;
+! 			else if (ch == '6')
+  			    ch = 0x1e;
+! 			else if (ch == '-')
+  			    ch = 0x1f;
+  			else
+  			    modifiers |= MOD_MASK_CTRL;
+  		    }
+  
+! 		    if (modifiers & MOD_MASK_ALT)
+  		    {
+! 			ch = Meta(ch);
+  			modifiers &= ~MOD_MASK_ALT;
+  		    }
+  		}
+***************
+*** 586,604 ****
+  		modifiers &= ~MOD_MASK_SHIFT;
+  	}
+  
+! 	ch = simplify_key( ch, &modifiers );
+! 	if( modifiers )
+  	{
+  	    string[ len++ ] = CSI;
+  	    string[ len++ ] = KS_MODIFIER;
+  	    string[ len++ ] = modifiers;
+  	}
+  
+! 	if( IS_SPECIAL( ch ) )
+  	{
+  	    string[ len++ ] = CSI;
+! 	    string[ len++ ] = K_SECOND( ch );
+! 	    string[ len++ ] = K_THIRD( ch );
+  	}
+  	else
+  	{
+--- 586,604 ----
+  		modifiers &= ~MOD_MASK_SHIFT;
+  	}
+  
+! 	ch = simplify_key(ch, &modifiers);
+! 	if (modifiers)
+  	{
+  	    string[ len++ ] = CSI;
+  	    string[ len++ ] = KS_MODIFIER;
+  	    string[ len++ ] = modifiers;
+  	}
+  
+! 	if (IS_SPECIAL(ch))
+  	{
+  	    string[ len++ ] = CSI;
+! 	    string[ len++ ] = K_SECOND(ch);
+! 	    string[ len++ ] = K_THIRD(ch);
+  	}
+  	else
+  	{
+***************
+*** 619,627 ****
+  	    string[ len++ ] = KE_CSI;
+  	}
+  
+! 	if( len > 0 )
+  	{
+! 	    add_to_input_buf( string, len );
+  	    return Pt_CONSUME;
+  	}
+      }
+--- 619,627 ----
+  	    string[ len++ ] = KE_CSI;
+  	}
+  
+! 	if (len > 0)
+  	{
+! 	    add_to_input_buf(string, len);
+  	    return Pt_CONSUME;
+  	}
+      }
+***************
+*** 630,646 ****
+  }
+  
+      static int
+! gui_ph_handle_mouse( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+      PhPointerEvent_t *pointer;
+      PhRect_t	     *pos;
+      int		     button = 0, repeated_click, modifiers = 0x0;
+      short	     mouse_x, mouse_y;
+  
+!     pointer = PhGetData( info->event );
+!     pos = PhGetRects( info->event );
+  
+!     gui_mch_mousehide( MOUSE_SHOW );
+  
+      /*
+       * Coordinates need to be relative to the base window,
+--- 630,646 ----
+  }
+  
+      static int
+! gui_ph_handle_mouse(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+      PhPointerEvent_t *pointer;
+      PhRect_t	     *pos;
+      int		     button = 0, repeated_click, modifiers = 0x0;
+      short	     mouse_x, mouse_y;
+  
+!     pointer = PhGetData(info->event);
+!     pos = PhGetRects(info->event);
+  
+!     gui_mch_mousehide(MOUSE_SHOW);
+  
+      /*
+       * Coordinates need to be relative to the base window,
+***************
+*** 649,675 ****
+      mouse_x = pos->ul.x + gui.border_width;
+      mouse_y = pos->ul.y + gui.border_width;
+  
+!     if( info->event->type == Ph_EV_PTR_MOTION_NOBUTTON )
+      {
+! 	gui_mouse_moved( mouse_x, mouse_y );
+  	return Pt_CONTINUE;
+      }
+  
+!     if( pointer->key_mods & Pk_KM_Shift )
+  	modifiers |= MOUSE_SHIFT;
+!     if( pointer->key_mods & Pk_KM_Ctrl )
+  	modifiers |= MOUSE_CTRL;
+!     if( pointer->key_mods & Pk_KM_Alt )
+  	modifiers |= MOUSE_ALT;
+  
+      /*
+       * FIXME More than one button may be involved, but for
+       * now just deal with one
+       */
+!     if( pointer->buttons & Ph_BUTTON_SELECT )
+  	button = MOUSE_LEFT;
+  
+!     if( pointer->buttons & Ph_BUTTON_MENU )
+      {
+  	button = MOUSE_RIGHT;
+  	/* Need the absolute coordinates for the popup menu */
+--- 649,675 ----
+      mouse_x = pos->ul.x + gui.border_width;
+      mouse_y = pos->ul.y + gui.border_width;
+  
+!     if (info->event->type == Ph_EV_PTR_MOTION_NOBUTTON)
+      {
+! 	gui_mouse_moved(mouse_x, mouse_y);
+  	return Pt_CONTINUE;
+      }
+  
+!     if (pointer->key_mods & Pk_KM_Shift)
+  	modifiers |= MOUSE_SHIFT;
+!     if (pointer->key_mods & Pk_KM_Ctrl)
+  	modifiers |= MOUSE_CTRL;
+!     if (pointer->key_mods & Pk_KM_Alt)
+  	modifiers |= MOUSE_ALT;
+  
+      /*
+       * FIXME More than one button may be involved, but for
+       * now just deal with one
+       */
+!     if (pointer->buttons & Ph_BUTTON_SELECT)
+  	button = MOUSE_LEFT;
+  
+!     if (pointer->buttons & Ph_BUTTON_MENU)
+      {
+  	button = MOUSE_RIGHT;
+  	/* Need the absolute coordinates for the popup menu */
+***************
+*** 677,705 ****
+  	abs_mouse.y = pointer->pos.y;
+      }
+  
+!     if( pointer->buttons & Ph_BUTTON_ADJUST )
+  	button = MOUSE_MIDDLE;
+  
+      /* Catch a real release (not phantom or other releases */
+!     if( info->event->type == Ph_EV_BUT_RELEASE )
+  	button = MOUSE_RELEASE;
+  
+!     if( info->event->type & Ph_EV_PTR_MOTION_BUTTON )
+  	button = MOUSE_DRAG;
+  
+  #if 0
+      /* Vim doesn't use button repeats */
+!     if( info->event->type & Ph_EV_BUT_REPEAT )
+  	button = MOUSE_DRAG;
+  #endif
+  
+      /* Don't do anything if it is one of the phantom mouse release events */
+!     if( ( button != MOUSE_RELEASE ) ||
+! 	    ( info->event->subtype == Ph_EV_RELEASE_REAL ) )
+      {
+  	repeated_click = (pointer->click_count >= 2) ? TRUE : FALSE;
+  
+! 	gui_send_mouse_event( button , mouse_x, mouse_y, repeated_click, modifiers );
+      }
+  
+      return Pt_CONTINUE;
+--- 677,705 ----
+  	abs_mouse.y = pointer->pos.y;
+      }
+  
+!     if (pointer->buttons & Ph_BUTTON_ADJUST)
+  	button = MOUSE_MIDDLE;
+  
+      /* Catch a real release (not phantom or other releases */
+!     if (info->event->type == Ph_EV_BUT_RELEASE)
+  	button = MOUSE_RELEASE;
+  
+!     if (info->event->type & Ph_EV_PTR_MOTION_BUTTON)
+  	button = MOUSE_DRAG;
+  
+  #if 0
+      /* Vim doesn't use button repeats */
+!     if (info->event->type & Ph_EV_BUT_REPEAT)
+  	button = MOUSE_DRAG;
+  #endif
+  
+      /* Don't do anything if it is one of the phantom mouse release events */
+!     if ((button != MOUSE_RELEASE) ||
+! 	    (info->event->subtype == Ph_EV_RELEASE_REAL))
+      {
+  	repeated_click = (pointer->click_count >= 2) ? TRUE : FALSE;
+  
+! 	gui_send_mouse_event(button , mouse_x, mouse_y, repeated_click, modifiers);
+      }
+  
+      return Pt_CONTINUE;
+***************
+*** 707,741 ****
+  
+  /* Handle a focus change of the PtRaw widget */
+      static int
+! gui_ph_handle_focus( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+!     if( info->reason == Pt_CB_LOST_FOCUS )
+      {
+! 	PtRemoveEventHandler( gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+! 		gui_ph_handle_mouse, NULL );
+  
+! 	gui_mch_mousehide( MOUSE_SHOW );
+      }
+      else
+      {
+! 	PtAddEventHandler( gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+! 		gui_ph_handle_mouse, NULL );
+      }
+      return Pt_CONTINUE;
+  }
+  
+      static void
+! gui_ph_handle_raw_draw( PtWidget_t *widget, PhTile_t *damage )
+  {
+      PhRect_t	*r;
+      PhPoint_t	offset;
+      PhPoint_t	translation;
+  
+!     if( is_ignore_draw == TRUE )
+  	return;
+  
+!     PtSuperClassDraw( PtBasic, widget, damage );
+!     PgGetTranslation( &translation );
+      PgClearTranslation();
+  
+  #if 0
+--- 707,741 ----
+  
+  /* Handle a focus change of the PtRaw widget */
+      static int
+! gui_ph_handle_focus(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+!     if (info->reason == Pt_CB_LOST_FOCUS)
+      {
+! 	PtRemoveEventHandler(gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+! 		gui_ph_handle_mouse, NULL);
+  
+! 	gui_mch_mousehide(MOUSE_SHOW);
+      }
+      else
+      {
+! 	PtAddEventHandler(gui.vimTextArea, Ph_EV_PTR_MOTION_NOBUTTON,
+! 		gui_ph_handle_mouse, NULL);
+      }
+      return Pt_CONTINUE;
+  }
+  
+      static void
+! gui_ph_handle_raw_draw(PtWidget_t *widget, PhTile_t *damage)
+  {
+      PhRect_t	*r;
+      PhPoint_t	offset;
+      PhPoint_t	translation;
+  
+!     if (is_ignore_draw == TRUE)
+  	return;
+  
+!     PtSuperClassDraw(PtBasic, widget, damage);
+!     PgGetTranslation(&translation);
+      PgClearTranslation();
+  
+  #if 0
+***************
+*** 750,770 ****
+      out_flush();
+  #endif
+  
+!     PtWidgetOffset( widget, &offset );
+!     PhTranslatePoint( &offset, PtWidgetPos( gui.vimTextArea, NULL ) );
+  
+  #if 1
+      /* Redraw individual damage regions */
+!     if( damage->next != NULL )
+  	damage = damage->next;
+  
+!     while( damage != NULL )
+      {
+  	r = &damage->rect;
+  	gui_redraw(
+  		r->ul.x - offset.x, r->ul.y - offset.y,
+  		r->lr.x - r->ul.x + 1,
+! 		r->lr.y - r->ul.y + 1 );
+  	damage = damage->next;
+      }
+  #else
+--- 750,770 ----
+      out_flush();
+  #endif
+  
+!     PtWidgetOffset(widget, &offset);
+!     PhTranslatePoint(&offset, PtWidgetPos(gui.vimTextArea, NULL));
+  
+  #if 1
+      /* Redraw individual damage regions */
+!     if (damage->next != NULL)
+  	damage = damage->next;
+  
+!     while(damage != NULL)
+      {
+  	r = &damage->rect;
+  	gui_redraw(
+  		r->ul.x - offset.x, r->ul.y - offset.y,
+  		r->lr.x - r->ul.x + 1,
+! 		r->lr.y - r->ul.y + 1);
+  	damage = damage->next;
+      }
+  #else
+***************
+*** 773,796 ****
+      gui_redraw(
+  	    r->ul.x - offset.x, r->ul.y - offset.y,
+  	    r->lr.x - r->ul.x + 1,
+! 	    r->lr.y - r->ul.y + 1 );
+  #endif
+  
+!     PgSetTranslation( &translation, 0 );
+  }
+  
+      static int
+  gui_ph_handle_pulldown_menu(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+!     if( data != NULL )
+      {
+  	vimmenu_T *menu = (vimmenu_T *) data;
+  
+! 	PtPositionMenu( menu->submenu_id, NULL );
+! 	PtRealizeWidget( menu->submenu_id );
+      }
+  
+      return Pt_CONTINUE;
+--- 773,796 ----
+      gui_redraw(
+  	    r->ul.x - offset.x, r->ul.y - offset.y,
+  	    r->lr.x - r->ul.x + 1,
+! 	    r->lr.y - r->ul.y + 1);
+  #endif
+  
+!     PgSetTranslation(&translation, 0);
+  }
+  
+      static int
+  gui_ph_handle_pulldown_menu(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+!     if (data != NULL)
+      {
+  	vimmenu_T *menu = (vimmenu_T *) data;
+  
+! 	PtPositionMenu(menu->submenu_id, NULL);
+! 	PtRealizeWidget(menu->submenu_id);
+      }
+  
+      return Pt_CONTINUE;
+*** ../vim-7.3.298/src/version.c	2011-09-07 18:58:24.000000000 +0200
+--- src/version.c	2011-09-07 19:01:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     299,
+  /**/
+
+-- 
+The only way the average employee can speak to an executive is by taking a
+second job as a golf caddie.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.300 b/source/ap/vim/patches/7.3.300
new file mode 100644
index 00000000..132b14a7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.300
@@ -0,0 +1,74 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.300
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.300
+Problem:    Python doesn't parse multi-byte argument correctly.
+Solution:   Use "t" instead of "s". (lilydjwg)
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.299/src/if_py_both.h	2011-07-07 15:08:53.000000000 +0200
+--- src/if_py_both.h	2011-09-07 19:25:12.000000000 +0200
+***************
+*** 74,80 ****
+      char *str = NULL;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "es#", ENC_OPT, &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+--- 74,80 ----
+      char *str = NULL;
+      int error = ((OutputObject *)(self))->error;
+  
+!     if (!PyArg_ParseTuple(args, "et#", ENC_OPT, &str, &len))
+  	return NULL;
+  
+      Py_BEGIN_ALLOW_THREADS
+***************
+*** 114,120 ****
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "es#", ENC_OPT, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+--- 114,120 ----
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "et#", ENC_OPT, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+*** ../vim-7.3.299/src/version.c	2011-09-07 19:08:57.000000000 +0200
+--- src/version.c	2011-09-07 19:26:05.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     300,
+  /**/
+
+-- 
+A salesperson says:            Translation:
+"backward compatible"          Old technology
+"Premium"                      Overpriced
+"Can't keep it on the shelf"   Unavailable
+"Stands alone"                 Piece of shit
+"Proprietary"                  Incompatible
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.301 b/source/ap/vim/patches/7.3.301
new file mode 100644
index 00000000..bb52974d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.301
@@ -0,0 +1,97 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.301
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.301
+Problem:    When 'smartindent' and 'copyindent' are set a Tab is used even
+	    though 'expandtab' is set.
+Solution:   Do not insert Tabs. Add a test. (Christian Brabandt)
+Files:	    src/misc1.c, src/testdir/test19.in, src/testdir/test19.ok
+
+
+*** ../vim-7.3.300/src/misc1.c	2011-07-27 17:31:42.000000000 +0200
+--- src/misc1.c	2011-09-07 19:37:04.000000000 +0200
+***************
+*** 363,369 ****
+  
+  	/* Fill to next tabstop with a tab, if possible */
+  	tab_pad = (int)curbuf->b_p_ts - (ind_done % (int)curbuf->b_p_ts);
+! 	if (todo >= tab_pad)
+  	{
+  	    todo -= tab_pad;
+  	    ++ind_len;
+--- 363,369 ----
+  
+  	/* Fill to next tabstop with a tab, if possible */
+  	tab_pad = (int)curbuf->b_p_ts - (ind_done % (int)curbuf->b_p_ts);
+! 	if (todo >= tab_pad && !curbuf->b_p_et)
+  	{
+  	    todo -= tab_pad;
+  	    ++ind_len;
+***************
+*** 372,378 ****
+  	}
+  
+  	/* Add tabs required for indent */
+! 	while (todo >= (int)curbuf->b_p_ts)
+  	{
+  	    todo -= (int)curbuf->b_p_ts;
+  	    ++ind_len;
+--- 372,378 ----
+  	}
+  
+  	/* Add tabs required for indent */
+! 	while (todo >= (int)curbuf->b_p_ts && !curbuf->b_p_et)
+  	{
+  	    todo -= (int)curbuf->b_p_ts;
+  	    ++ind_len;
+*** ../vim-7.3.300/src/testdir/test19.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test19.in	2011-09-07 19:46:17.000000000 +0200
+***************
+*** 12,17 ****
+--- 12,20 ----
+  0wR			
+  :" Test replacing with Tabs
+  0wR			
++ :" Test that copyindent works with expandtab set
++ :set expandtab smartindent copyindent ts=8 sw=8 sts=8
++ :exe "norm! o{\<cr>x"
+  :?^start?,$w! test.out
+  :qa!
+  ENDTEST
+*** ../vim-7.3.300/src/testdir/test19.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test19.ok	2011-09-07 19:37:04.000000000 +0200
+***************
+*** 5,7 ****
+--- 5,9 ----
+      a cde
+      		hi
+  test text
++ {
++         x
+*** ../vim-7.3.300/src/version.c	2011-09-07 19:30:17.000000000 +0200
+--- src/version.c	2011-09-07 19:38:48.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     301,
+  /**/
+
+-- 
+I recommend ordering large cargo containers of paper towels to make up
+whatever budget underruns you have.  Paper products are always useful and they
+have the advantage of being completely flushable if you need to make room in
+the storage area later.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.302 b/source/ap/vim/patches/7.3.302
new file mode 100644
index 00000000..f8d2c249
--- /dev/null
+++ b/source/ap/vim/patches/7.3.302
@@ -0,0 +1,68 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.302
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.302 (after 7.3.301)
+Problem:    Test 19 fails without 'smartindent' and +eval.
+Solution:   Don't use ":exe". Source small.vim.
+Files:	    src/testdir/test19.in
+
+
+*** ../vim-7.3.301/src/testdir/test19.in	2011-09-07 19:58:04.000000000 +0200
+--- src/testdir/test19.in	2011-09-08 20:32:33.000000000 +0200
+***************
+*** 1,6 ****
+--- 1,7 ----
+  Tests for "r<Tab>" with 'smarttab' and 'expandtab' set/not set.
+  
+  STARTTEST
++ :so small.vim
+  :set smarttab expandtab ts=8 sw=4
+  :" make sure that backspace works, no matter what termcap is used
+  :set t_kD=x7f t_kb=x08
+***************
+*** 14,21 ****
+  0wR			
+  :" Test that copyindent works with expandtab set
+  :set expandtab smartindent copyindent ts=8 sw=8 sts=8
+! :exe "norm! o{\<cr>x"
+! :?^start?,$w! test.out
+  :qa!
+  ENDTEST
+  
+--- 15,22 ----
+  0wR			
+  :" Test that copyindent works with expandtab set
+  :set expandtab smartindent copyindent ts=8 sw=8 sts=8
+! o{
+! x:?^start?,$w! test.out
+  :qa!
+  ENDTEST
+  
+*** ../vim-7.3.301/src/version.c	2011-09-07 19:58:04.000000000 +0200
+--- src/version.c	2011-09-08 23:22:01.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     302,
+  /**/
+
+-- 
+Engineers are always delighted to share wisdom, even in areas in which they
+have no experience whatsoever.  Their logic provides them with inherent
+insight into any field of expertise.  This can be a problem when dealing with
+the illogical people who believe that knowledge can only be derived through
+experience.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.303 b/source/ap/vim/patches/7.3.303
new file mode 100644
index 00000000..f85bf68d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.303
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.303
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.303 (after 7.3.296)
+Problem:    Compilation error.
+Solution:   Correct return type from int to pid_t. (Danek Duvall)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.302/src/os_unix.c	2011-09-07 15:04:26.000000000 +0200
+--- src/os_unix.c	2011-09-08 20:47:47.000000000 +0200
+***************
+*** 159,165 ****
+  #else
+  typedef int waitstatus;
+  #endif
+! static int  wait4pid __ARGS((pid_t, waitstatus *));
+  
+  static int  WaitForChar __ARGS((long));
+  #if defined(__BEOS__)
+--- 159,165 ----
+  #else
+  typedef int waitstatus;
+  #endif
+! static pid_t wait4pid __ARGS((pid_t, waitstatus *));
+  
+  static int  WaitForChar __ARGS((long));
+  #if defined(__BEOS__)
+*** ../vim-7.3.302/src/version.c	2011-09-08 23:22:35.000000000 +0200
+--- src/version.c	2011-09-08 23:23:43.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     303,
+  /**/
+
+-- 
+For humans, honesty is a matter of degree.  Engineers are always honest in
+matters of technology and human relationships.  That's why it's a good idea
+to keep engineers away from customers, romantic interests, and other people
+who can't handle the truth.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.304 b/source/ap/vim/patches/7.3.304
new file mode 100644
index 00000000..6abfe9cc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.304
@@ -0,0 +1,103 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.304
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.304
+Problem:    Strawberry Perl doesn't work on MS-Windows.
+Solution:   Use xsubpp if needed. (Yasuhiro Matsumoto)
+Files:	    src/Make_ming.mak, src/Make_mvc.mak
+
+
+*** ../vim-7.3.303/src/Make_ming.mak	2011-06-19 01:30:01.000000000 +0200
+--- src/Make_ming.mak	2011-09-14 10:44:55.000000000 +0200
+***************
+*** 108,113 ****
+--- 108,120 ----
+  # on NT, it's here:
+  PERLLIB=$(PERL)/lib
+  PERLLIBS=$(PERLLIB)/Core
++ XSUBPP=$(PERLLIB)/ExtUtils/xsubpp
++ XSUBPP_EXISTS=$(shell perl -e "print 1 unless -e '$(XSUBPP)'")
++ ifeq "$(XSUBPP_EXISTS)" ""
++ XSUBPP=perl $(XSUBPP)
++ else
++ XSUBPP=xsubpp
++ endif
+  endif
+  
+  # uncomment 'LUA' if you want a Lua-enabled version
+***************
+*** 696,702 ****
+  endif
+  
+  if_perl.c: if_perl.xs typemap
+! 	perl $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
+  	     $(PERLLIB)/ExtUtils/typemap if_perl.xs > $@
+  
+  $(OUTDIR)/netbeans.o:	netbeans.c $(INCL) $(NBDEBUG_INCL) $(NBDEBUG_SRC)
+--- 703,709 ----
+  endif
+  
+  if_perl.c: if_perl.xs typemap
+! 	$(XSUBPP) -prototypes -typemap \
+  	     $(PERLLIB)/ExtUtils/typemap if_perl.xs > $@
+  
+  $(OUTDIR)/netbeans.o:	netbeans.c $(INCL) $(NBDEBUG_INCL) $(NBDEBUG_SRC)
+*** ../vim-7.3.303/src/Make_mvc.mak	2011-06-12 20:31:25.000000000 +0200
+--- src/Make_mvc.mak	2011-09-14 10:46:08.000000000 +0200
+***************
+*** 785,790 ****
+--- 785,795 ----
+  PERL_INC = /I $(PERL_INCDIR)
+  PERL_OBJ = $(OUTDIR)\if_perl.obj $(OUTDIR)\if_perlsfio.obj
+  XSUBPP = $(PERL)\lib\ExtUtils\xsubpp
++ !if exist($(XSUBPP)
++ XSUBPP = $(PERL_EXE) $(XSUBPP)
++ !else
++ XSUBPP = xsubpp
++ !endif
+  XSUBPP_TYPEMAP = $(PERL)\lib\ExtUtils\typemap
+  
+  !endif
+***************
+*** 1041,1047 ****
+  	$(CC) $(CFLAGS) $(LUA_INC) if_lua.c
+  
+  if_perl.c : if_perl.xs typemap
+! 	$(PERL_EXE) $(XSUBPP) -prototypes -typemap $(XSUBPP_TYPEMAP) \
+  		-typemap typemap if_perl.xs > if_perl.c
+  
+  $(OUTDIR)/if_perl.obj: $(OUTDIR) if_perl.c  $(INCL)
+--- 1046,1052 ----
+  	$(CC) $(CFLAGS) $(LUA_INC) if_lua.c
+  
+  if_perl.c : if_perl.xs typemap
+! 	$(XSUBPP) -prototypes -typemap $(XSUBPP_TYPEMAP) \
+  		-typemap typemap if_perl.xs > if_perl.c
+  
+  $(OUTDIR)/if_perl.obj: $(OUTDIR) if_perl.c  $(INCL)
+*** ../vim-7.3.303/src/version.c	2011-09-08 23:24:09.000000000 +0200
+--- src/version.c	2011-09-14 10:47:41.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     304,
+  /**/
+
+-- 
+It's totally unfair to suggest - as many have - that engineers are socially
+inept.  Engineers simply have different objectives when it comes to social
+interaction.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.305 b/source/ap/vim/patches/7.3.305
new file mode 100644
index 00000000..e70fd594
--- /dev/null
+++ b/source/ap/vim/patches/7.3.305
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.305
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.305
+Problem:    Auto-loading a function while editing the command line causes
+	    scrolling up the display.
+Solution:   Don't set msg_scroll when defining a function and the user is not
+	    typing. (Yasuhiro Matsumoto)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.304/src/eval.c	2011-08-17 15:23:16.000000000 +0200
+--- src/eval.c	2011-09-14 14:28:21.000000000 +0200
+***************
+*** 20786,20792 ****
+      nesting = 0;
+      for (;;)
+      {
+! 	msg_scroll = TRUE;
+  	need_wait_return = FALSE;
+  	sourcing_lnum_off = sourcing_lnum;
+  
+--- 20786,20793 ----
+      nesting = 0;
+      for (;;)
+      {
+! 	if (KeyTyped)
+! 	    msg_scroll = TRUE;
+  	need_wait_return = FALSE;
+  	sourcing_lnum_off = sourcing_lnum;
+  
+*** ../vim-7.3.304/src/version.c	2011-09-14 10:49:44.000000000 +0200
+--- src/version.c	2011-09-14 14:30:49.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     305,
+  /**/
+
+-- 
+If someone questions your market projections, simply point out that your
+target market is "People who are nuts" and "People who will buy any damn
+thing".  Nobody is going to tell you there aren't enough of those people
+to go around.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.306 b/source/ap/vim/patches/7.3.306
new file mode 100644
index 00000000..62bd4cfc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.306
@@ -0,0 +1,244 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.306
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.306
+Problem:    When closing a window there is a chance that deleting a scrollbar
+	    triggers a GUI resize, which uses the window while it is not in a
+	    valid state.
+Solution:   Set the buffer pointer to NULL to be able to detect the invalid
+	    situation.  Fix a few places that used the buffer pointer
+	    incorrectly.
+Files:	    src/buffer.c, src/ex_cmds.c, src/term.c, src/window.c
+
+
+*** ../vim-7.3.305/src/buffer.c	2011-05-19 13:40:47.000000000 +0200
+--- src/buffer.c	2011-09-10 13:46:59.000000000 +0200
+***************
+*** 416,421 ****
+--- 416,423 ----
+  #endif
+  
+      buf_freeall(buf, (del_buf ? BFA_DEL : 0) + (wipe_buf ? BFA_WIPE : 0));
++     if (win_valid(win) && win->w_buffer == buf)
++ 	win->w_buffer = NULL;  /* make sure we don't use the buffer now */
+  
+  #ifdef FEAT_AUTOCMD
+      /* Autocommands may have deleted the buffer. */
+***************
+*** 560,565 ****
+--- 562,571 ----
+  #ifdef FEAT_DIFF
+      diff_buf_delete(buf);	    /* Can't use 'diff' for unloaded buffer. */
+  #endif
++ #ifdef FEAT_SYN_HL
++     if (curwin->w_buffer == buf)
++ 	reset_synblock(curwin);	    /* remove any ownsyntax */
++ #endif
+  
+  #ifdef FEAT_FOLDING
+      /* No folds in an empty buffer. */
+***************
+*** 1346,1351 ****
+--- 1352,1361 ----
+  # endif
+  #endif
+      {
++ #ifdef FEAT_SYN_HL
++ 	if (prevbuf == curwin->w_buffer)
++ 	    reset_synblock(curwin);
++ #endif
+  #ifdef FEAT_WINDOWS
+  	if (unload)
+  	    close_windows(prevbuf, FALSE);
+***************
+*** 1395,1404 ****
+      foldUpdateAll(curwin);	/* update folds (later). */
+  #endif
+  
+- #ifdef FEAT_SYN_HL
+-     reset_synblock(curwin);
+-     curwin->w_s = &(buf->b_s);
+- #endif
+      /* Get the buffer in the current window. */
+      curwin->w_buffer = buf;
+      curbuf = buf;
+--- 1405,1410 ----
+***************
+*** 1409,1414 ****
+--- 1415,1424 ----
+  	diff_buf_add(curbuf);
+  #endif
+  
++ #ifdef FEAT_SYN_HL
++     curwin->w_s = &(buf->b_s);
++ #endif
++ 
+      /* Cursor on first line by default. */
+      curwin->w_cursor.lnum = 1;
+      curwin->w_cursor.col = 0;
+*** ../vim-7.3.305/src/ex_cmds.c	2011-07-07 16:20:45.000000000 +0200
+--- src/ex_cmds.c	2011-09-10 13:39:13.000000000 +0200
+***************
+*** 3619,3628 ****
+       */
+      check_arg_idx(curwin);
+  
+- #ifdef FEAT_SYN_HL
+-     reset_synblock(curwin);	    /* remove any ownsyntax */
+- #endif
+- 
+  #ifdef FEAT_AUTOCMD
+      if (!auto_buf)
+  #endif
+--- 3619,3624 ----
+*** ../vim-7.3.305/src/term.c	2011-05-10 16:41:13.000000000 +0200
+--- src/term.c	2011-09-14 14:39:39.000000000 +0200
+***************
+*** 3017,3028 ****
+      if (width < 0 || height < 0)    /* just checking... */
+  	return;
+  
+!     if (State == HITRETURN || State == SETWSIZE) /* postpone the resizing */
+      {
+  	State = SETWSIZE;
+  	return;
+      }
+  
+      ++busy;
+  
+  #ifdef AMIGA
+--- 3017,3036 ----
+      if (width < 0 || height < 0)    /* just checking... */
+  	return;
+  
+!     if (State == HITRETURN || State == SETWSIZE)
+      {
++ 	/* postpone the resizing */
+  	State = SETWSIZE;
+  	return;
+      }
+  
++     /* curwin->w_buffer can be NULL when we are closing a window and the
++      * buffer has already been closed and removing a scrollbar causes a resize
++      * event. Don't resize then, it will happen after entering another buffer.
++      */
++     if (curwin->w_buffer == NULL)
++ 	return;
++ 
+      ++busy;
+  
+  #ifdef AMIGA
+*** ../vim-7.3.305/src/window.c	2011-01-08 14:45:57.000000000 +0100
+--- src/window.c	2011-09-10 14:04:56.000000000 +0200
+***************
+*** 1226,1240 ****
+      }
+      newp->w_tagstackidx = oldp->w_tagstackidx;
+      newp->w_tagstacklen = oldp->w_tagstacklen;
+! # ifdef FEAT_FOLDING
+      copyFoldingState(oldp, newp);
+! # endif
+  
+      win_init_some(newp, oldp);
+  
+! # ifdef FEAT_SYN_HL
+      check_colorcolumn(newp);
+! # endif
+  }
+  
+  /*
+--- 1226,1240 ----
+      }
+      newp->w_tagstackidx = oldp->w_tagstackidx;
+      newp->w_tagstacklen = oldp->w_tagstacklen;
+! #ifdef FEAT_FOLDING
+      copyFoldingState(oldp, newp);
+! #endif
+  
+      win_init_some(newp, oldp);
+  
+! #ifdef FEAT_SYN_HL
+      check_colorcolumn(newp);
+! #endif
+  }
+  
+  /*
+***************
+*** 2212,2217 ****
+--- 2212,2222 ----
+  	out_flush();
+  #endif
+  
++ #ifdef FEAT_SYN_HL
++     /* Free independent synblock before the buffer is freed. */
++     reset_synblock(win);
++ #endif
++ 
+      /*
+       * Close the link to the buffer.
+       */
+***************
+*** 2222,2228 ****
+      if (!win_valid(win) || last_window() || curtab != prev_curtab)
+  	return;
+  
+!     /* Free the memory used for the window. */
+      wp = win_free_mem(win, &dir, NULL);
+  
+      /* Make sure curwin isn't invalid.  It can cause severe trouble when
+--- 2227,2234 ----
+      if (!win_valid(win) || last_window() || curtab != prev_curtab)
+  	return;
+  
+!     /* Free the memory used for the window and get the window that received
+!      * the screen space. */
+      wp = win_free_mem(win, &dir, NULL);
+  
+      /* Make sure curwin isn't invalid.  It can cause severe trouble when
+***************
+*** 3247,3252 ****
+--- 3253,3261 ----
+      else
+  	wp->w_farsi = W_CONV;
+  #endif
++ #ifdef FEAT_SYN_HL
++     wp->w_s = &wp->w_buffer->b_s;
++ #endif
+  }
+  
+  /*
+***************
+*** 4437,4443 ****
+  #endif /* FEAT_GUI */
+  
+  #ifdef FEAT_SYN_HL
+-     reset_synblock(wp);  /* free independent synblock */
+      vim_free(wp->w_p_cc_cols);
+  #endif
+  
+--- 4446,4451 ----
+*** ../vim-7.3.305/src/version.c	2011-09-14 14:33:47.000000000 +0200
+--- src/version.c	2011-09-14 14:35:30.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     306,
+  /**/
+
+-- 
+A consultant is a person who takes your money and annoys your employees while
+tirelessly searching for the best way to extend the consulting contract.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.307 b/source/ap/vim/patches/7.3.307
new file mode 100644
index 00000000..3fd95e11
--- /dev/null
+++ b/source/ap/vim/patches/7.3.307
@@ -0,0 +1,180 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.307
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.307
+Problem:    Python 3 doesn't support slice assignment.
+Solution:   Implement slices. (Brett Overesch, Roland Puntaier)
+Files:	    src/if_python3.c
+
+
+*** ../vim-7.3.306/src/if_python3.c	2011-08-28 16:00:14.000000000 +0200
+--- src/if_python3.c	2011-09-14 15:01:26.000000000 +0200
+***************
+*** 855,862 ****
+  
+  static Py_ssize_t BufferLength(PyObject *);
+  static PyObject *BufferItem(PyObject *, Py_ssize_t);
+! static PyObject* BufferSubscript(PyObject *self, PyObject* idx);
+! static Py_ssize_t BufferAsSubscript(PyObject *self, PyObject* idx, PyObject* val);
+  
+  
+  /* Line range type - Implementation functions
+--- 855,862 ----
+  
+  static Py_ssize_t BufferLength(PyObject *);
+  static PyObject *BufferItem(PyObject *, Py_ssize_t);
+! static PyObject* BufferSubscript(PyObject *self, PyObject *idx);
+! static Py_ssize_t BufferAsSubscript(PyObject *self, PyObject *idx, PyObject *val);
+  
+  
+  /* Line range type - Implementation functions
+***************
+*** 865,872 ****
+  
+  #define RangeType_Check(obj) ((obj)->ob_base.ob_type == &RangeType)
+  
+! static PyObject* RangeSubscript(PyObject *self, PyObject* idx);
+  static Py_ssize_t RangeAsItem(PyObject *, Py_ssize_t, PyObject *);
+  
+  /* Current objects type - Implementation functions
+   * -----------------------------------------------
+--- 865,873 ----
+  
+  #define RangeType_Check(obj) ((obj)->ob_base.ob_type == &RangeType)
+  
+! static PyObject* RangeSubscript(PyObject *self, PyObject *idx);
+  static Py_ssize_t RangeAsItem(PyObject *, Py_ssize_t, PyObject *);
++ static Py_ssize_t RangeAsSubscript(PyObject *self, PyObject *idx, PyObject *val);
+  
+  /* Current objects type - Implementation functions
+   * -----------------------------------------------
+***************
+*** 1035,1041 ****
+  	      &step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return BufferSlice(self,start,stop);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+--- 1036,1042 ----
+  	      &step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return BufferSlice(self, start, stop);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+***************
+*** 1084,1090 ****
+  PyMappingMethods RangeAsMapping = {
+      /* mp_length	*/ (lenfunc)RangeLength,
+      /* mp_subscript     */ (binaryfunc)RangeSubscript,
+!     /* mp_ass_subscript */ (objobjargproc)0,
+  };
+  
+  /* Line range object - Implementation
+--- 1085,1091 ----
+  PyMappingMethods RangeAsMapping = {
+      /* mp_length	*/ (lenfunc)RangeLength,
+      /* mp_subscript     */ (binaryfunc)RangeSubscript,
+!     /* mp_ass_subscript */ (objobjargproc)RangeAsSubscript,
+  };
+  
+  /* Line range object - Implementation
+***************
+*** 1123,1128 ****
+--- 1124,1138 ----
+  		    &((RangeObject *)(self))->end);
+  }
+  
++     static Py_ssize_t
++ RangeAsSlice(PyObject *self, Py_ssize_t lo, Py_ssize_t hi, PyObject *val)
++ {
++     return RBAsSlice(((RangeObject *)(self))->buf, lo, hi, val,
++ 		    ((RangeObject *)(self))->start,
++ 		    ((RangeObject *)(self))->end,
++ 		    &((RangeObject *)(self))->end);
++ }
++ 
+      static PyObject *
+  RangeSubscript(PyObject *self, PyObject* idx)
+  {
+***************
+*** 1138,1150 ****
+  		&step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return RangeSlice(self,start,stop+1);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+  }
+  
+  /* Buffer list object - Definitions
+   */
+  
+--- 1148,1183 ----
+  		&step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+! 	return RangeSlice(self, start, stop);
+      } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+  }
+  
++     static Py_ssize_t
++ RangeAsSubscript(PyObject *self, PyObject *idx, PyObject *val)
++ {
++     if (PyLong_Check(idx)) {
++ 	long n = PyLong_AsLong(idx);
++ 	return RangeAsItem(self, n, val);
++     } else if (PySlice_Check(idx)) {
++ 	Py_ssize_t start, stop, step, slicelen;
++ 
++ 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
++ 		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
++ 		&start, &stop,
++ 		&step, &slicelen) < 0) {
++ 	    return -1;
++ 	}
++ 	return RangeAsSlice(self, start, stop, val);
++     } else {
++ 	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
++ 	return -1;
++     }
++ }
++ 
++ 
+  /* Buffer list object - Definitions
+   */
+  
+*** ../vim-7.3.306/src/version.c	2011-09-14 14:43:21.000000000 +0200
+--- src/version.c	2011-09-14 14:58:16.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     307,
+  /**/
+
+-- 
+The process for understanding customers primarily involves sitting around with
+other marketing people and talking about what you would to if you were dumb
+enough to be a customer.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.308 b/source/ap/vim/patches/7.3.308
new file mode 100644
index 00000000..36e5de51
--- /dev/null
+++ b/source/ap/vim/patches/7.3.308
@@ -0,0 +1,260 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.308
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.308
+Problem:    Writing to 'verbosefile' has problems, e.g. for :highlight.
+Solution:   Do not use a separate verbose_write() function but write with the
+	    same code that does redirecting. (Yasuhiro Matsumoto)
+Files:	    src/message.c
+
+
+*** ../vim-7.3.307/src/message.c	2011-08-17 20:33:18.000000000 +0200
+--- src/message.c	2011-09-14 15:32:57.000000000 +0200
+***************
+*** 39,45 ****
+  static void msg_screen_putchar __ARGS((int c, int attr));
+  static int  msg_check_screen __ARGS((void));
+  static void redir_write __ARGS((char_u *s, int maxlen));
+- static void verbose_write __ARGS((char_u *s, int maxlen));
+  #ifdef FEAT_CON_DIALOG
+  static char_u *msg_show_console_dialog __ARGS((char_u *message, char_u *buttons, int dfltbutton));
+  static int	confirm_msg_used = FALSE;	/* displaying confirm_msg */
+--- 39,44 ----
+***************
+*** 58,63 ****
+--- 57,65 ----
+  static struct msg_hist *last_msg_hist = NULL;
+  static int msg_hist_len = 0;
+  
++ static FILE *verbose_fd = NULL;
++ static int  verbose_did_open = FALSE;
++ 
+  /*
+   * When writing messages to the screen, there are many different situations.
+   * A number of variables is used to remember the current state:
+***************
+*** 1551,1557 ****
+  #ifdef FEAT_MBYTE
+      if (has_mbyte && !IS_SPECIAL(c))
+      {
+!         int len = (*mb_ptr2len)(str);
+  
+  	/* For multi-byte characters check for an illegal byte. */
+  	if (has_mbyte && MB_BYTE2LEN(*str) > len)
+--- 1553,1559 ----
+  #ifdef FEAT_MBYTE
+      if (has_mbyte && !IS_SPECIAL(c))
+      {
+! 	int len = (*mb_ptr2len)(str);
+  
+  	/* For multi-byte characters check for an illegal byte. */
+  	if (has_mbyte && MB_BYTE2LEN(*str) > len)
+***************
+*** 1560,1569 ****
+  	    *sp = str + 1;
+  	    return buf;
+  	}
+!         /* Since 'special' is TRUE the multi-byte character 'c' will be
+!          * processed by get_special_key_name() */
+!         c = (*mb_ptr2char)(str);
+!         *sp = str + len;
+      }
+      else
+  #endif
+--- 1562,1571 ----
+  	    *sp = str + 1;
+  	    return buf;
+  	}
+! 	/* Since 'special' is TRUE the multi-byte character 'c' will be
+! 	 * processed by get_special_key_name() */
+! 	c = (*mb_ptr2char)(str);
+! 	*sp = str + len;
+      }
+      else
+  #endif
+***************
+*** 3065,3076 ****
+      if (redir_off)
+  	return;
+  
+!     /*
+!      * If 'verbosefile' is set write message in that file.
+!      * Must come before the rest because of updating "msg_col".
+!      */
+!     if (*p_vfile != NUL)
+! 	verbose_write(s, maxlen);
+  
+      if (redirecting())
+      {
+--- 3067,3075 ----
+      if (redir_off)
+  	return;
+  
+!     /* If 'verbosefile' is set prepare for writing in that file. */
+!     if (*p_vfile != NUL && verbose_fd == NULL)
+! 	verbose_open();
+  
+      if (redirecting())
+      {
+***************
+*** 3084,3092 ****
+  		    write_reg_contents(redir_reg, (char_u *)" ", -1, TRUE);
+  		else if (redir_vname)
+  		    var_redir_str((char_u *)" ", -1);
+! 		else if (redir_fd)
+  #endif
+  		    fputs(" ", redir_fd);
+  		++cur_col;
+  	    }
+  	}
+--- 3083,3094 ----
+  		    write_reg_contents(redir_reg, (char_u *)" ", -1, TRUE);
+  		else if (redir_vname)
+  		    var_redir_str((char_u *)" ", -1);
+! 		else
+  #endif
++ 		    if (redir_fd != NULL)
+  		    fputs(" ", redir_fd);
++ 		if (verbose_fd != NULL)
++ 		    fputs(" ", verbose_fd);
+  		++cur_col;
+  	    }
+  	}
+***************
+*** 3098,3110 ****
+  	    var_redir_str(s, maxlen);
+  #endif
+  
+! 	/* Adjust the current column */
+  	while (*s != NUL && (maxlen < 0 || (int)(s - str) < maxlen))
+  	{
+  #ifdef FEAT_EVAL
+! 	    if (!redir_reg && !redir_vname && redir_fd != NULL)
+  #endif
+! 		putc(*s, redir_fd);
+  	    if (*s == '\r' || *s == '\n')
+  		cur_col = 0;
+  	    else if (*s == '\t')
+--- 3100,3115 ----
+  	    var_redir_str(s, maxlen);
+  #endif
+  
+! 	/* Write and adjust the current column. */
+  	while (*s != NUL && (maxlen < 0 || (int)(s - str) < maxlen))
+  	{
+  #ifdef FEAT_EVAL
+! 	    if (!redir_reg && !redir_vname)
+  #endif
+! 		if (redir_fd != NULL)
+! 		    putc(*s, redir_fd);
+! 	    if (verbose_fd != NULL)
+! 		putc(*s, verbose_fd);
+  	    if (*s == '\r' || *s == '\n')
+  		cur_col = 0;
+  	    else if (*s == '\t')
+***************
+*** 3122,3128 ****
+      int
+  redirecting()
+  {
+!     return redir_fd != NULL
+  #ifdef FEAT_EVAL
+  			  || redir_reg || redir_vname
+  #endif
+--- 3127,3133 ----
+      int
+  redirecting()
+  {
+!     return redir_fd != NULL || *p_vfile != NUL
+  #ifdef FEAT_EVAL
+  			  || redir_reg || redir_vname
+  #endif
+***************
+*** 3180,3188 ****
+  	cmdline_row = msg_row;
+  }
+  
+- static FILE *verbose_fd = NULL;
+- static int  verbose_did_open = FALSE;
+- 
+  /*
+   * Called when 'verbosefile' is set: stop writing to the file.
+   */
+--- 3185,3190 ----
+***************
+*** 3220,3268 ****
+  }
+  
+  /*
+-  * Write a string to 'verbosefile'.
+-  * When "maxlen" is -1 write the whole string, otherwise up to "maxlen" bytes.
+-  */
+-     static void
+- verbose_write(str, maxlen)
+-     char_u	*str;
+-     int		maxlen;
+- {
+-     char_u	*s = str;
+-     static int	cur_col = 0;
+- 
+-     /* Open the file when called the first time. */
+-     if (verbose_fd == NULL)
+- 	verbose_open();
+- 
+-     if (verbose_fd != NULL)
+-     {
+- 	/* If the string doesn't start with CR or NL, go to msg_col */
+- 	if (*s != '\n' && *s != '\r')
+- 	{
+- 	    while (cur_col < msg_col)
+- 	    {
+- 		fputs(" ", verbose_fd);
+- 		++cur_col;
+- 	    }
+- 	}
+- 
+- 	/* Adjust the current column */
+- 	while (*s != NUL && (maxlen < 0 || (int)(s - str) < maxlen))
+- 	{
+- 	    putc(*s, verbose_fd);
+- 	    if (*s == '\r' || *s == '\n')
+- 		cur_col = 0;
+- 	    else if (*s == '\t')
+- 		cur_col += (8 - cur_col % 8);
+- 	    else
+- 		++cur_col;
+- 	    ++s;
+- 	}
+-     }
+- }
+- 
+- /*
+   * Give a warning message (for searching).
+   * Use 'w' highlighting and may repeat the message after redrawing
+   */
+--- 3222,3227 ----
+*** ../vim-7.3.307/src/version.c	2011-09-14 15:01:54.000000000 +0200
+--- src/version.c	2011-09-14 15:38:31.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     308,
+  /**/
+
+-- 
+The average life of an organization chart is six months.  You can safely
+ignore any order from your boss that would take six months to complete.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.309 b/source/ap/vim/patches/7.3.309
new file mode 100644
index 00000000..f274284b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.309
@@ -0,0 +1,105 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.309
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.309 (after 7.3.307)
+Problem:    Warnings for pointer types.
+Solution:   Change PySliceObject to PyObject.
+Files:	    src/if_python3.c
+
+
+*** ../vim-7.3.308/src/if_python3.c	2011-09-14 15:01:54.000000000 +0200
+--- src/if_python3.c	2011-09-14 15:30:45.000000000 +0200
+***************
+*** 1030,1036 ****
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+  	      &step, &slicelen) < 0) {
+--- 1030,1036 ----
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+  	      &step, &slicelen) < 0) {
+***************
+*** 1054,1060 ****
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+  	      &step, &slicelen) < 0) {
+--- 1054,1060 ----
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+  	      &step, &slicelen) < 0) {
+***************
+*** 1142,1148 ****
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+  		&step, &slicelen) < 0) {
+--- 1142,1148 ----
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+  		&step, &slicelen) < 0) {
+***************
+*** 1164,1170 ****
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PySliceObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+  		&step, &slicelen) < 0) {
+--- 1164,1170 ----
+      } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+! 	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+  		&step, &slicelen) < 0) {
+*** ../vim-7.3.308/src/version.c	2011-09-14 15:39:26.000000000 +0200
+--- src/version.c	2011-09-14 15:40:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     309,
+  /**/
+
+-- 
+Never enter the boss's office unless it's absolutely necessary.  Every boss
+saves one corner of the desk for useless assignments that are doled out like
+Halloween candy to each visitor.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.310 b/source/ap/vim/patches/7.3.310
new file mode 100644
index 00000000..e3ffa5a4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.310
@@ -0,0 +1,3524 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.310
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.310
+Problem:    Code not following Vim style.
+Solution:   Fix the style. (Elias Diem)
+Files:	    src/gui_photon.c
+
+
+*** ../vim-7.3.309/src/gui_photon.c	2011-09-07 19:08:57.000000000 +0200
+--- src/gui_photon.c	2011-09-14 16:01:55.000000000 +0200
+***************
+*** 477,483 ****
+  	}
+  #endif
+  
+! 	for(i = 0; special_keys[i].key_sym != 0; i++)
+  	{
+  	    if (special_keys[i].key_sym == key->key_cap)
+  	    {
+--- 477,483 ----
+  	}
+  #endif
+  
+! 	for (i = 0; special_keys[i].key_sym != 0; i++)
+  	{
+  	    if (special_keys[i].key_sym == key->key_cap)
+  	    {
+***************
+*** 758,764 ****
+      if (damage->next != NULL)
+  	damage = damage->next;
+  
+!     while(damage != NULL)
+      {
+  	r = &damage->rect;
+  	gui_redraw(
+--- 758,764 ----
+      if (damage->next != NULL)
+  	damage = damage->next;
+  
+!     while (damage != NULL)
+      {
+  	r = &damage->rect;
+  	gui_redraw(
+***************
+*** 798,809 ****
+  
+  /* This is used for pulldown/popup menus and also toolbar buttons */
+      static int
+! gui_ph_handle_menu( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+!     if( data != NULL )
+      {
+  	vimmenu_T *menu = (vimmenu_T *) data;
+! 	gui_menu_cb( menu );
+      }
+      return Pt_CONTINUE;
+  }
+--- 798,809 ----
+  
+  /* This is used for pulldown/popup menus and also toolbar buttons */
+      static int
+! gui_ph_handle_menu(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+!     if (data != NULL)
+      {
+  	vimmenu_T *menu = (vimmenu_T *) data;
+! 	gui_menu_cb(menu);
+      }
+      return Pt_CONTINUE;
+  }
+***************
+*** 813,821 ****
+  gui_ph_handle_menu_unrealized(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+!     PtGiveFocus( gui.vimTextArea, NULL );
+      return Pt_CONTINUE;
+  }
+  
+--- 813,821 ----
+  gui_ph_handle_menu_unrealized(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+!     PtGiveFocus(gui.vimTextArea, NULL);
+      return Pt_CONTINUE;
+  }
+  
+***************
+*** 823,831 ****
+  gui_ph_handle_window_open(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+!     gui_set_shellsize( FALSE, TRUE, RESIZE_BOTH );
+      return Pt_CONTINUE;
+  }
+  
+--- 823,831 ----
+  gui_ph_handle_window_open(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+!     gui_set_shellsize(FALSE, TRUE, RESIZE_BOTH);
+      return Pt_CONTINUE;
+  }
+  
+***************
+*** 836,909 ****
+  
+  /* TODO: Set a clipping rect? */
+      static void
+! gui_ph_draw_start( void )
+  {
+      PhGC_t *gc;
+  
+      gc = PgGetGC();
+!     PgSetRegion( PtWidgetRid( PtFindDisjoint( gui.vimTextArea ) ) );
+!     PgClearClippingsCx( gc );
+!     PgClearTranslationCx( gc );
+  
+!     PtWidgetOffset( gui.vimTextArea, &gui_ph_raw_offset );
+!     PhTranslatePoint( &gui_ph_raw_offset, PtWidgetPos( gui.vimTextArea, NULL ) );
+  
+!     PgSetTranslation( &gui_ph_raw_offset, Pg_RELATIVE );
+  }
+  
+      static void
+! gui_ph_draw_end( void )
+  {
+      gui_ph_raw_offset.x = -gui_ph_raw_offset.x;
+      gui_ph_raw_offset.y = -gui_ph_raw_offset.y;
+!     PgSetTranslation( &gui_ph_raw_offset, Pg_RELATIVE );
+  }
+  
+  #ifdef USE_PANEL_GROUP
+      static vimmenu_T *
+! gui_ph_find_buffer_item( char_u *name )
+  {
+      vimmenu_T *top_level = root_menu;
+      vimmenu_T *items = NULL;
+  
+!     while( top_level != NULL &&
+! 	    ( STRCMP( top_level->dname, "Buffers" ) != 0 ) )
+  	top_level = top_level->next;
+  
+!     if( top_level != NULL )
+      {
+  	items = top_level->children;
+  
+! 	while( items != NULL &&
+! 		( STRCMP( items->dname, name ) != 0 ) )
+  	    items = items->next;
+      }
+      return items;
+  }
+  
+      static void
+! gui_ph_pg_set_buffer_num( int_u buf_num )
+  {
+      int i;
+      char search[16];
+      char *mark;
+  
+!     if( gui.vimTextArea == NULL || buf_num == 0 )
+  	return;
+  
+      search[0] = '(';
+!     ultoa( buf_num, &search[1], 10 );
+!     STRCAT( search, ")" );
+  
+!     for( i = 0; i < num_panels; i++ )
+      {
+  	/* find the last "(" in the panel title and see if the buffer
+  	 * number in the title matches the one we're looking for */
+! 	mark = STRRCHR( panel_titles[ i ], '(' );
+! 	if( mark != NULL && STRCMP( mark, search ) == 0 )
+  	{
+! 	    PtSetResource( gui.vimPanelGroup, Pt_ARG_PG_CURRENT_INDEX,
+! 		    i, 0 );
+  	}
+      }
+  }
+--- 836,909 ----
+  
+  /* TODO: Set a clipping rect? */
+      static void
+! gui_ph_draw_start(void)
+  {
+      PhGC_t *gc;
+  
+      gc = PgGetGC();
+!     PgSetRegion(PtWidgetRid(PtFindDisjoint(gui.vimTextArea)));
+!     PgClearClippingsCx(gc);
+!     PgClearTranslationCx(gc);
+  
+!     PtWidgetOffset(gui.vimTextArea, &gui_ph_raw_offset);
+!     PhTranslatePoint(&gui_ph_raw_offset, PtWidgetPos(gui.vimTextArea, NULL));
+  
+!     PgSetTranslation(&gui_ph_raw_offset, Pg_RELATIVE);
+  }
+  
+      static void
+! gui_ph_draw_end(void)
+  {
+      gui_ph_raw_offset.x = -gui_ph_raw_offset.x;
+      gui_ph_raw_offset.y = -gui_ph_raw_offset.y;
+!     PgSetTranslation(&gui_ph_raw_offset, Pg_RELATIVE);
+  }
+  
+  #ifdef USE_PANEL_GROUP
+      static vimmenu_T *
+! gui_ph_find_buffer_item(char_u *name)
+  {
+      vimmenu_T *top_level = root_menu;
+      vimmenu_T *items = NULL;
+  
+!     while (top_level != NULL &&
+! 	    (STRCMP(top_level->dname, "Buffers") != 0))
+  	top_level = top_level->next;
+  
+!     if (top_level != NULL)
+      {
+  	items = top_level->children;
+  
+! 	while (items != NULL &&
+! 		(STRCMP(items->dname, name) != 0))
+  	    items = items->next;
+      }
+      return items;
+  }
+  
+      static void
+! gui_ph_pg_set_buffer_num(int_u buf_num)
+  {
+      int i;
+      char search[16];
+      char *mark;
+  
+!     if (gui.vimTextArea == NULL || buf_num == 0)
+  	return;
+  
+      search[0] = '(';
+!     ultoa(buf_num, &search[1], 10);
+!     STRCAT(search, ")");
+  
+!     for (i = 0; i < num_panels; i++)
+      {
+  	/* find the last "(" in the panel title and see if the buffer
+  	 * number in the title matches the one we're looking for */
+! 	mark = STRRCHR(panel_titles[ i ], '(');
+! 	if (mark != NULL && STRCMP(mark, search) == 0)
+  	{
+! 	    PtSetResource(gui.vimPanelGroup, Pt_ARG_PG_CURRENT_INDEX,
+! 		    i, 0);
+  	}
+      }
+  }
+***************
+*** 912,930 ****
+  gui_ph_handle_pg_change(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+      vimmenu_T *menu;
+      PtPanelGroupCallback_t *panel;
+  
+!     if( info->event != NULL )
+      {
+  	panel = info->cbdata;
+! 	if( panel->new_panel != NULL )
+  	{
+! 	    menu = gui_ph_find_buffer_item( panel->new_panel );
+! 	    if( menu )
+! 		gui_menu_cb( menu );
+  	}
+      }
+      return Pt_CONTINUE;
+--- 912,930 ----
+  gui_ph_handle_pg_change(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+      vimmenu_T *menu;
+      PtPanelGroupCallback_t *panel;
+  
+!     if (info->event != NULL)
+      {
+  	panel = info->cbdata;
+! 	if (panel->new_panel != NULL)
+  	{
+! 	    menu = gui_ph_find_buffer_item(panel->new_panel);
+! 	    if (menu)
+! 		gui_menu_cb(menu);
+  	}
+      }
+      return Pt_CONTINUE;
+***************
+*** 935,951 ****
+  	short *top,
+  	short *bottom,
+  	short *left,
+! 	short *right )
+  {
+      unsigned short abs_raw_x, abs_raw_y, abs_panel_x, abs_panel_y;
+      const unsigned short *margin_top, *margin_bottom;
+      const unsigned short *margin_left, *margin_right;
+  
+!     PtGetAbsPosition( gui.vimTextArea, &abs_raw_x, &abs_raw_y );
+!     PtGetAbsPosition( gui.vimPanelGroup, &abs_panel_x, &abs_panel_y );
+  
+!     PtGetResource( gui.vimPanelGroup, Pt_ARG_MARGIN_RIGHT, &margin_right, 0 );
+!     PtGetResource( gui.vimPanelGroup, Pt_ARG_MARGIN_BOTTOM, &margin_bottom, 0 );
+  
+      abs_raw_x -= abs_panel_x;
+      abs_raw_y -= abs_panel_y;
+--- 935,951 ----
+  	short *top,
+  	short *bottom,
+  	short *left,
+! 	short *right)
+  {
+      unsigned short abs_raw_x, abs_raw_y, abs_panel_x, abs_panel_y;
+      const unsigned short *margin_top, *margin_bottom;
+      const unsigned short *margin_left, *margin_right;
+  
+!     PtGetAbsPosition(gui.vimTextArea, &abs_raw_x, &abs_raw_y);
+!     PtGetAbsPosition(gui.vimPanelGroup, &abs_panel_x, &abs_panel_y);
+  
+!     PtGetResource(gui.vimPanelGroup, Pt_ARG_MARGIN_RIGHT, &margin_right, 0);
+!     PtGetResource(gui.vimPanelGroup, Pt_ARG_MARGIN_BOTTOM, &margin_bottom, 0);
+  
+      abs_raw_x -= abs_panel_x;
+      abs_raw_y -= abs_panel_y;
+***************
+*** 959,979 ****
+  
+  /* Used for the tabs for PtPanelGroup */
+      static int
+! gui_ph_is_buffer_item( vimmenu_T *menu, vimmenu_T *parent )
+  {
+      char *mark;
+  
+!     if( STRCMP( parent->dname, "Buffers" ) == 0 )
+      {
+  	/* Look for '(' digits ')' */
+! 	mark = vim_strchr( menu->dname, '(' );
+! 	if( mark != NULL )
+  	{
+  	    mark++;
+! 	    while( isdigit( *mark ) )
+  		mark++;
+  
+! 	    if( *mark == ')' )
+  		return TRUE;
+  	}
+      }
+--- 959,979 ----
+  
+  /* Used for the tabs for PtPanelGroup */
+      static int
+! gui_ph_is_buffer_item(vimmenu_T *menu, vimmenu_T *parent)
+  {
+      char *mark;
+  
+!     if (STRCMP(parent->dname, "Buffers") == 0)
+      {
+  	/* Look for '(' digits ')' */
+! 	mark = vim_strchr(menu->dname, '(');
+! 	if (mark != NULL)
+  	{
+  	    mark++;
+! 	    while (isdigit(*mark))
+  		mark++;
+  
+! 	    if (*mark == ')')
+  		return TRUE;
+  	}
+      }
+***************
+*** 981,1043 ****
+  }
+  
+      static void
+! gui_ph_pg_add_buffer(char *name )
+  {
+      char **new_titles = NULL;
+  
+!     new_titles = (char **) alloc( ( num_panels + 1 ) * sizeof( char ** ) );
+!     if( new_titles != NULL )
+      {
+! 	if( num_panels > 0 )
+! 	    memcpy( new_titles, panel_titles, num_panels * sizeof( char ** ) );
+  
+  	new_titles[ num_panels++ ] = name;
+  
+! 	PtSetResource( gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, new_titles,
+! 		num_panels );
+  
+! 	vim_free( panel_titles );
+  	panel_titles = new_titles;
+      }
+  }
+  
+      static void
+! gui_ph_pg_remove_buffer( char *name )
+  {
+      int i;
+      char **new_titles = NULL;
+  
+      /* If there is only 1 panel, we just use the temporary place holder */
+!     if( num_panels > 1 )
+      {
+! 	new_titles = (char **) alloc( ( num_panels - 1 ) * sizeof( char ** ) );
+! 	if( new_titles != NULL )
+  	{
+  	    char **s = new_titles;
+  	    /* Copy all the titles except the one we're removing */
+! 	    for( i = 0; i < num_panels; i++ )
+  	    {
+! 		if( STRCMP( panel_titles[ i ], name ) != 0 )
+  		{
+  		    *s++ = panel_titles[ i ];
+  		}
+  	    }
+  	    num_panels--;
+  
+! 	    PtSetResource( gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, new_titles,
+! 		    num_panels );
+  
+! 	    vim_free( panel_titles );
+  	    panel_titles = new_titles;
+  	}
+      }
+      else
+      {
+  	num_panels--;
+! 	PtSetResource( gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, &empty_title,
+! 		1 );
+  
+! 	vim_free( panel_titles );
+  	panel_titles = NULL;
+      }
+  }
+--- 981,1043 ----
+  }
+  
+      static void
+! gui_ph_pg_add_buffer(char *name)
+  {
+      char **new_titles = NULL;
+  
+!     new_titles = (char **) alloc((num_panels + 1) * sizeof(char **));
+!     if (new_titles != NULL)
+      {
+! 	if (num_panels > 0)
+! 	    memcpy(new_titles, panel_titles, num_panels * sizeof(char **));
+  
+  	new_titles[ num_panels++ ] = name;
+  
+! 	PtSetResource(gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, new_titles,
+! 		num_panels);
+  
+! 	vim_free(panel_titles);
+  	panel_titles = new_titles;
+      }
+  }
+  
+      static void
+! gui_ph_pg_remove_buffer(char *name)
+  {
+      int i;
+      char **new_titles = NULL;
+  
+      /* If there is only 1 panel, we just use the temporary place holder */
+!     if (num_panels > 1)
+      {
+! 	new_titles = (char **) alloc((num_panels - 1) * sizeof(char **));
+! 	if (new_titles != NULL)
+  	{
+  	    char **s = new_titles;
+  	    /* Copy all the titles except the one we're removing */
+! 	    for (i = 0; i < num_panels; i++)
+  	    {
+! 		if (STRCMP(panel_titles[ i ], name) != 0)
+  		{
+  		    *s++ = panel_titles[ i ];
+  		}
+  	    }
+  	    num_panels--;
+  
+! 	    PtSetResource(gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, new_titles,
+! 		    num_panels);
+  
+! 	    vim_free(panel_titles);
+  	    panel_titles = new_titles;
+  	}
+      }
+      else
+      {
+  	num_panels--;
+! 	PtSetResource(gui.vimPanelGroup, Pt_ARG_PG_PANEL_TITLES, &empty_title,
+! 		1);
+  
+! 	vim_free(panel_titles);
+  	panel_titles = NULL;
+      }
+  }
+***************
+*** 1047,1060 ****
+  gui_ph_handle_buffer_remove(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info )
+  {
+      vimmenu_T *menu;
+  
+!     if( data != NULL )
+      {
+  	menu = (vimmenu_T *) data;
+! 	gui_ph_pg_remove_buffer( menu->dname );
+      }
+  
+      return Pt_CONTINUE;
+--- 1047,1060 ----
+  gui_ph_handle_buffer_remove(
+  	PtWidget_t *widget,
+  	void *data,
+! 	PtCallbackInfo_t *info)
+  {
+      vimmenu_T *menu;
+  
+!     if (data != NULL)
+      {
+  	menu = (vimmenu_T *) data;
+! 	gui_ph_pg_remove_buffer(menu->dname);
+      }
+  
+      return Pt_CONTINUE;
+***************
+*** 1062,1074 ****
+  #endif
+  
+      static int
+! gui_ph_pane_resize( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+!     if( PtWidgetIsRealized( widget ) )
+      {
+  	is_ignore_draw = TRUE;
+! 	PtStartFlux( gui.vimContainer );
+! 	PtContainerHold( gui.vimContainer );
+      }
+  
+      return Pt_CONTINUE;
+--- 1062,1074 ----
+  #endif
+  
+      static int
+! gui_ph_pane_resize(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+!     if (PtWidgetIsRealized(widget))
+      {
+  	is_ignore_draw = TRUE;
+! 	PtStartFlux(gui.vimContainer);
+! 	PtContainerHold(gui.vimContainer);
+      }
+  
+      return Pt_CONTINUE;
+***************
+*** 1078,1084 ****
+  
+  #ifdef FEAT_MBYTE
+      void
+! gui_ph_encoding_changed( int new_encoding )
+  {
+      /* Default encoding is latin1 */
+      char *charset = "latin1";
+--- 1078,1084 ----
+  
+  #ifdef FEAT_MBYTE
+      void
+! gui_ph_encoding_changed(int new_encoding)
+  {
+      /* Default encoding is latin1 */
+      char *charset = "latin1";
+***************
+*** 1094,1106 ****
+  	{ DBCS_CHS, "gb" }
+      };
+  
+!     for( i = 0; i < ARRAY_LENGTH( charsets ); i++ )
+      {
+! 	if( new_encoding == charsets[ i ].encoding )
+  	    charset = charsets[ i ].name;
+      }
+  
+!     charset_translate = PxTranslateSet( charset_translate, charset );
+  }
+  #endif
+  
+--- 1094,1106 ----
+  	{ DBCS_CHS, "gb" }
+      };
+  
+!     for (i = 0; i < ARRAY_LENGTH(charsets); i++)
+      {
+! 	if (new_encoding == charsets[ i ].encoding)
+  	    charset = charsets[ i ].name;
+      }
+  
+!     charset_translate = PxTranslateSet(charset_translate, charset);
+  }
+  #endif
+  
+***************
+*** 1112,1118 ****
+      int	    *argc;
+      char    **argv;
+  {
+!     PtInit( NULL );
+  }
+  
+      int
+--- 1112,1118 ----
+      int	    *argc;
+      char    **argv;
+  {
+!     PtInit(NULL);
+  }
+  
+      int
+***************
+*** 1124,1213 ****
+      PhDim_t	window_size = {100, 100}; /* Arbitrary values */
+      PhPoint_t	pos = {0, 0};
+  
+!     gui.event_buffer = (PhEvent_t *) alloc( EVENT_BUFFER_SIZE );
+!     if( gui.event_buffer == NULL )
+  	return FAIL;
+  
+      /* Get a translation so we can convert from ISO Latin-1 to UTF */
+!     charset_translate = PxTranslateSet( NULL, "latin1" );
+  
+      /* The +2 is for the 1 pixel dark line on each side */
+      gui.border_offset = gui.border_width = GUI_PH_MARGIN + 2;
+  
+      /* Handle close events ourselves */
+!     PtSetArg( &args[ n++ ], Pt_ARG_WINDOW_MANAGED_FLAGS, Pt_FALSE, Ph_WM_CLOSE );
+!     PtSetArg( &args[ n++ ], Pt_ARG_WINDOW_NOTIFY_FLAGS, Pt_TRUE,
+! 	    Ph_WM_CLOSE | Ph_WM_RESIZE | Ph_WM_FOCUS );
+!     PtSetArg( &args[ n++ ], Pt_ARG_DIM, &window_size, 0 );
+!     gui.vimWindow = PtCreateWidget( PtWindow, NULL, n, args );
+!     if( gui.vimWindow == NULL )
+  	return FAIL;
+  
+!     PtAddCallback( gui.vimWindow, Pt_CB_WINDOW, gui_ph_handle_window_cb, NULL );
+!     PtAddCallback( gui.vimWindow, Pt_CB_WINDOW_OPENING,
+! 	    gui_ph_handle_window_open, NULL );
+  
+      n = 0;
+!     PtSetArg( &args[ n++ ], Pt_ARG_ANCHOR_FLAGS, Pt_ANCHOR_ALL, Pt_IS_ANCHORED );
+!     PtSetArg( &args[ n++ ], Pt_ARG_DIM, &window_size, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_POS, &pos, 0 );
+  
+  #ifdef USE_PANEL_GROUP
+      /* Put in a temprary place holder title */
+!     PtSetArg( &args[ n++ ], Pt_ARG_PG_PANEL_TITLES, &empty_title, 1 );
+  
+!     gui.vimPanelGroup = PtCreateWidget( PtPanelGroup, gui.vimWindow, n, args );
+!     if( gui.vimPanelGroup == NULL )
+  	return FAIL;
+  
+!     PtAddCallback( gui.vimPanelGroup, Pt_CB_PG_PANEL_SWITCHING,
+! 	    gui_ph_handle_pg_change, NULL );
+  #else
+      /* Turn off all edge decorations */
+!     PtSetArg( &args[ n++ ], Pt_ARG_BASIC_FLAGS, Pt_FALSE, Pt_ALL );
+!     PtSetArg( &args[ n++ ], Pt_ARG_BEVEL_WIDTH, 0, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_MARGIN_WIDTH, 0, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_MARGIN_HEIGHT, 0, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_CONTAINER_FLAGS, Pt_TRUE, Pt_AUTO_EXTENT );
+  
+!     gui.vimContainer = PtCreateWidget( PtPane, gui.vimWindow, n, args );
+!     if( gui.vimContainer == NULL )
+  	return FAIL;
+  
+!     PtAddCallback( gui.vimContainer, Pt_CB_RESIZE, gui_ph_pane_resize, NULL );
+  #endif
+  
+      /* Size for the text area is set in gui_mch_set_text_area_pos */
+      n = 0;
+  
+!     PtSetArg( &args[ n++ ], Pt_ARG_RAW_DRAW_F, gui_ph_handle_raw_draw, 1 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_BEVEL_WIDTH, GUI_PH_MARGIN, 0 );
+      /*
+       * Using focus render also causes the whole widget to be redrawn
+       * whenever it changes focus, which is very annoying :p
+       */
+!     PtSetArg( &args[ n++ ], Pt_ARG_FLAGS, Pt_TRUE,
+! 	    Pt_GETS_FOCUS | Pt_HIGHLIGHTED );
+  #ifndef FEAT_MOUSESHAPE
+!     PtSetArg( &args[ n++ ], Pt_ARG_CURSOR_TYPE, GUI_PH_MOUSE_TYPE, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_CURSOR_COLOR, gui_ph_mouse_color, 0 );
+  #endif
+  
+!     gui.vimTextArea = PtCreateWidget( PtRaw, Pt_DFLT_PARENT, n, args );
+!     if( gui.vimTextArea == NULL)
+  	return FAIL;
+  
+      /* TODO: use PtAddEventHandlers instead? */
+      /* Not using Ph_EV_BUT_REPEAT because vim wouldn't use it anyway */
+!     PtAddEventHandler( gui.vimTextArea,
+  	    Ph_EV_BUT_PRESS | Ph_EV_BUT_RELEASE | Ph_EV_PTR_MOTION_BUTTON,
+! 	    gui_ph_handle_mouse, NULL );
+!     PtAddEventHandler( gui.vimTextArea, Ph_EV_KEY,
+! 	    gui_ph_handle_keyboard, NULL );
+!     PtAddCallback( gui.vimTextArea, Pt_CB_GOT_FOCUS,
+! 	    gui_ph_handle_focus, NULL );
+!     PtAddCallback( gui.vimTextArea, Pt_CB_LOST_FOCUS,
+! 	    gui_ph_handle_focus, NULL );
+  
+      /*
+       * Now that the text area widget has been created, set up the colours,
+--- 1124,1213 ----
+      PhDim_t	window_size = {100, 100}; /* Arbitrary values */
+      PhPoint_t	pos = {0, 0};
+  
+!     gui.event_buffer = (PhEvent_t *) alloc(EVENT_BUFFER_SIZE);
+!     if (gui.event_buffer == NULL)
+  	return FAIL;
+  
+      /* Get a translation so we can convert from ISO Latin-1 to UTF */
+!     charset_translate = PxTranslateSet(NULL, "latin1");
+  
+      /* The +2 is for the 1 pixel dark line on each side */
+      gui.border_offset = gui.border_width = GUI_PH_MARGIN + 2;
+  
+      /* Handle close events ourselves */
+!     PtSetArg(&args[ n++ ], Pt_ARG_WINDOW_MANAGED_FLAGS, Pt_FALSE, Ph_WM_CLOSE);
+!     PtSetArg(&args[ n++ ], Pt_ARG_WINDOW_NOTIFY_FLAGS, Pt_TRUE,
+! 	    Ph_WM_CLOSE | Ph_WM_RESIZE | Ph_WM_FOCUS);
+!     PtSetArg(&args[ n++ ], Pt_ARG_DIM, &window_size, 0);
+!     gui.vimWindow = PtCreateWidget(PtWindow, NULL, n, args);
+!     if (gui.vimWindow == NULL)
+  	return FAIL;
+  
+!     PtAddCallback(gui.vimWindow, Pt_CB_WINDOW, gui_ph_handle_window_cb, NULL);
+!     PtAddCallback(gui.vimWindow, Pt_CB_WINDOW_OPENING,
+! 	    gui_ph_handle_window_open, NULL);
+  
+      n = 0;
+!     PtSetArg(&args[ n++ ], Pt_ARG_ANCHOR_FLAGS, Pt_ANCHOR_ALL, Pt_IS_ANCHORED);
+!     PtSetArg(&args[ n++ ], Pt_ARG_DIM, &window_size, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_POS, &pos, 0);
+  
+  #ifdef USE_PANEL_GROUP
+      /* Put in a temprary place holder title */
+!     PtSetArg(&args[ n++ ], Pt_ARG_PG_PANEL_TITLES, &empty_title, 1);
+  
+!     gui.vimPanelGroup = PtCreateWidget(PtPanelGroup, gui.vimWindow, n, args);
+!     if (gui.vimPanelGroup == NULL)
+  	return FAIL;
+  
+!     PtAddCallback(gui.vimPanelGroup, Pt_CB_PG_PANEL_SWITCHING,
+! 	    gui_ph_handle_pg_change, NULL);
+  #else
+      /* Turn off all edge decorations */
+!     PtSetArg(&args[ n++ ], Pt_ARG_BASIC_FLAGS, Pt_FALSE, Pt_ALL);
+!     PtSetArg(&args[ n++ ], Pt_ARG_BEVEL_WIDTH, 0, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_MARGIN_WIDTH, 0, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_MARGIN_HEIGHT, 0, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_CONTAINER_FLAGS, Pt_TRUE, Pt_AUTO_EXTENT);
+  
+!     gui.vimContainer = PtCreateWidget(PtPane, gui.vimWindow, n, args);
+!     if (gui.vimContainer == NULL)
+  	return FAIL;
+  
+!     PtAddCallback(gui.vimContainer, Pt_CB_RESIZE, gui_ph_pane_resize, NULL);
+  #endif
+  
+      /* Size for the text area is set in gui_mch_set_text_area_pos */
+      n = 0;
+  
+!     PtSetArg(&args[ n++ ], Pt_ARG_RAW_DRAW_F, gui_ph_handle_raw_draw, 1);
+!     PtSetArg(&args[ n++ ], Pt_ARG_BEVEL_WIDTH, GUI_PH_MARGIN, 0);
+      /*
+       * Using focus render also causes the whole widget to be redrawn
+       * whenever it changes focus, which is very annoying :p
+       */
+!     PtSetArg(&args[ n++ ], Pt_ARG_FLAGS, Pt_TRUE,
+! 	    Pt_GETS_FOCUS | Pt_HIGHLIGHTED);
+  #ifndef FEAT_MOUSESHAPE
+!     PtSetArg(&args[ n++ ], Pt_ARG_CURSOR_TYPE, GUI_PH_MOUSE_TYPE, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_CURSOR_COLOR, gui_ph_mouse_color, 0);
+  #endif
+  
+!     gui.vimTextArea = PtCreateWidget(PtRaw, Pt_DFLT_PARENT, n, args);
+!     if (gui.vimTextArea == NULL)
+  	return FAIL;
+  
+      /* TODO: use PtAddEventHandlers instead? */
+      /* Not using Ph_EV_BUT_REPEAT because vim wouldn't use it anyway */
+!     PtAddEventHandler(gui.vimTextArea,
+  	    Ph_EV_BUT_PRESS | Ph_EV_BUT_RELEASE | Ph_EV_PTR_MOTION_BUTTON,
+! 	    gui_ph_handle_mouse, NULL);
+!     PtAddEventHandler(gui.vimTextArea, Ph_EV_KEY,
+! 	    gui_ph_handle_keyboard, NULL);
+!     PtAddCallback(gui.vimTextArea, Pt_CB_GOT_FOCUS,
+! 	    gui_ph_handle_focus, NULL);
+!     PtAddCallback(gui.vimTextArea, Pt_CB_LOST_FOCUS,
+! 	    gui_ph_handle_focus, NULL);
+  
+      /*
+       * Now that the text area widget has been created, set up the colours,
+***************
+*** 1218,1278 ****
+       * Create the two timers, not as accurate as using the kernel timer
+       * functions, but good enough
+       */
+!     gui_ph_timer_cursor  = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+!     if( gui_ph_timer_cursor == NULL )
+  	return FAIL;
+  
+!     gui_ph_timer_timeout = PtCreateWidget( PtTimer, gui.vimWindow, 0, NULL );
+!     if( gui_ph_timer_timeout == NULL )
+  	return FAIL;
+  
+!     PtAddCallback( gui_ph_timer_cursor,  Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_cursor, NULL);
+!     PtAddCallback( gui_ph_timer_timeout, Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_timeout, NULL);
+  
+  #ifdef FEAT_MENU
+      n = 0;
+!     PtSetArg( &args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_ANCHOR_FLAGS, Pt_ANCHOR_LEFT_RIGHT,
+! 	    Pt_IS_ANCHORED );
+!     gui.vimToolBarGroup = PtCreateWidget( PtToolbarGroup, gui.vimWindow,
+! 	    n, args );
+!     if( gui.vimToolBarGroup == NULL )
+  	return FAIL;
+  
+!     PtAddCallback( gui.vimToolBarGroup, Pt_CB_RESIZE,
+! 	    gui_ph_handle_menu_resize, NULL );
+  
+      n = 0;
+      flags = 0;
+!     PtSetArg( &args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0 );
+!     if( ! vim_strchr( p_go, GO_MENUS ) )
+      {
+  	flags |= Pt_DELAY_REALIZE;
+! 	PtSetArg( &args[ n++ ], Pt_ARG_FLAGS, Pt_TRUE, flags );
+      }
+!     gui.vimMenuBar = PtCreateWidget( PtMenuBar, gui.vimToolBarGroup, n, args );
+!     if( gui.vimMenuBar == NULL )
+  	return FAIL;
+  
+  # ifdef FEAT_TOOLBAR
+      n = 0;
+  
+!     PtSetArg( &args[ n++ ], Pt_ARG_ANCHOR_FLAGS,
+! 	    Pt_ANCHOR_LEFT_RIGHT |Pt_TOP_ANCHORED_TOP, Pt_IS_ANCHORED );
+!     PtSetArg( &args[ n++ ], Pt_ARG_RESIZE_FLAGS, Pt_TRUE,
+! 	    Pt_RESIZE_Y_AS_REQUIRED );
+!     PtSetArg( &args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0 );
+  
+      flags = Pt_GETS_FOCUS;
+!     if( ! vim_strchr( p_go, GO_TOOLBAR ) )
+  	flags |= Pt_DELAY_REALIZE;
+  
+!     PtSetArg( &args[ n++ ], Pt_ARG_FLAGS, Pt_DELAY_REALIZE, flags );
+  
+!     gui.vimToolBar = PtCreateWidget( PtToolbar, gui.vimToolBarGroup, n, args );
+!     if( gui.vimToolBar == NULL )
+  	return FAIL;
+  
+      /*
+--- 1218,1278 ----
+       * Create the two timers, not as accurate as using the kernel timer
+       * functions, but good enough
+       */
+!     gui_ph_timer_cursor  = PtCreateWidget(PtTimer, gui.vimWindow, 0, NULL);
+!     if (gui_ph_timer_cursor == NULL)
+  	return FAIL;
+  
+!     gui_ph_timer_timeout = PtCreateWidget(PtTimer, gui.vimWindow, 0, NULL);
+!     if (gui_ph_timer_timeout == NULL)
+  	return FAIL;
+  
+!     PtAddCallback(gui_ph_timer_cursor,  Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_cursor, NULL);
+!     PtAddCallback(gui_ph_timer_timeout, Pt_CB_TIMER_ACTIVATE,
+  	    gui_ph_handle_timer_timeout, NULL);
+  
+  #ifdef FEAT_MENU
+      n = 0;
+!     PtSetArg(&args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_ANCHOR_FLAGS, Pt_ANCHOR_LEFT_RIGHT,
+! 	    Pt_IS_ANCHORED);
+!     gui.vimToolBarGroup = PtCreateWidget(PtToolbarGroup, gui.vimWindow,
+! 	    n, args);
+!     if (gui.vimToolBarGroup == NULL)
+  	return FAIL;
+  
+!     PtAddCallback(gui.vimToolBarGroup, Pt_CB_RESIZE,
+! 	    gui_ph_handle_menu_resize, NULL);
+  
+      n = 0;
+      flags = 0;
+!     PtSetArg(&args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0);
+!     if (! vim_strchr(p_go, GO_MENUS))
+      {
+  	flags |= Pt_DELAY_REALIZE;
+! 	PtSetArg(&args[ n++ ], Pt_ARG_FLAGS, Pt_TRUE, flags);
+      }
+!     gui.vimMenuBar = PtCreateWidget(PtMenuBar, gui.vimToolBarGroup, n, args);
+!     if (gui.vimMenuBar == NULL)
+  	return FAIL;
+  
+  # ifdef FEAT_TOOLBAR
+      n = 0;
+  
+!     PtSetArg(&args[ n++ ], Pt_ARG_ANCHOR_FLAGS,
+! 	    Pt_ANCHOR_LEFT_RIGHT |Pt_TOP_ANCHORED_TOP, Pt_IS_ANCHORED);
+!     PtSetArg(&args[ n++ ], Pt_ARG_RESIZE_FLAGS, Pt_TRUE,
+! 	    Pt_RESIZE_Y_AS_REQUIRED);
+!     PtSetArg(&args[ n++ ], Pt_ARG_WIDTH, window_size.w, 0);
+  
+      flags = Pt_GETS_FOCUS;
+!     if (! vim_strchr(p_go, GO_TOOLBAR))
+  	flags |= Pt_DELAY_REALIZE;
+  
+!     PtSetArg(&args[ n++ ], Pt_ARG_FLAGS, Pt_DELAY_REALIZE, flags);
+  
+!     gui.vimToolBar = PtCreateWidget(PtToolbar, gui.vimToolBarGroup, n, args);
+!     if (gui.vimToolBar == NULL)
+  	return FAIL;
+  
+      /*
+***************
+*** 1310,1329 ****
+      if (gui_win_x != -1 && gui_win_y != -1)
+  	gui_mch_set_winpos(gui_win_x, gui_win_y);
+  
+!     return (PtRealizeWidget( gui.vimWindow ) == 0) ? OK : FAIL;
+  }
+  
+      void
+  gui_mch_exit(int rc)
+  {
+!     PtDestroyWidget( gui.vimWindow );
+  
+!     PxTranslateSet( charset_translate, NULL );
+  
+!     vim_free( gui.event_buffer );
+  
+  #ifdef USE_PANEL_GROUPS
+!     vim_free( panel_titles );
+  #endif
+  }
+  
+--- 1310,1329 ----
+      if (gui_win_x != -1 && gui_win_y != -1)
+  	gui_mch_set_winpos(gui_win_x, gui_win_y);
+  
+!     return (PtRealizeWidget(gui.vimWindow) == 0) ? OK : FAIL;
+  }
+  
+      void
+  gui_mch_exit(int rc)
+  {
+!     PtDestroyWidget(gui.vimWindow);
+  
+!     PxTranslateSet(charset_translate, NULL);
+  
+!     vim_free(gui.event_buffer);
+  
+  #ifdef USE_PANEL_GROUPS
+!     vim_free(panel_titles);
+  #endif
+  }
+  
+***************
+*** 1333,1339 ****
+  /* When no events are available, photon will call this function, working is
+   * set to FALSE, and the gui_mch_update loop will exit. */
+      static int
+! exit_gui_mch_update( void *data )
+  {
+      *(int *)data = FALSE;
+      return Pt_END;
+--- 1333,1339 ----
+  /* When no events are available, photon will call this function, working is
+   * set to FALSE, and the gui_mch_update loop will exit. */
+      static int
+! exit_gui_mch_update(void *data)
+  {
+      *(int *)data = FALSE;
+      return Pt_END;
+***************
+*** 1344,1351 ****
+  {
+      int working = TRUE;
+  
+!     PtAppAddWorkProc( NULL, exit_gui_mch_update, &working );
+!     while( ( working == TRUE ) && !vim_is_input_buf_full())
+      {
+  	PtProcessEvent();
+      }
+--- 1344,1351 ----
+  {
+      int working = TRUE;
+  
+!     PtAppAddWorkProc(NULL, exit_gui_mch_update, &working);
+!     while ((working == TRUE) && !vim_is_input_buf_full())
+      {
+  	PtProcessEvent();
+      }
+***************
+*** 1356,1378 ****
+  {
+      is_timeout = FALSE;
+  
+!     if( wtime > 0 )
+! 	PtSetResource( gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, wtime, 0 );
+  
+!     while( 1 )
+      {
+  	PtProcessEvent();
+! 	if( input_available() )
+  	{
+! 	    PtSetResource( gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, 0, 0 );
+  	    return OK;
+  	}
+! 	else if( is_timeout == TRUE )
+  	    return FAIL;
+      }
+  }
+  
+! #if defined( FEAT_BROWSE ) || defined( PROTO )
+  /*
+   * Put up a file requester.
+   * Returns the selected name in allocated memory, or NULL for Cancel.
+--- 1356,1378 ----
+  {
+      is_timeout = FALSE;
+  
+!     if (wtime > 0)
+! 	PtSetResource(gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, wtime, 0);
+  
+!     while (1)
+      {
+  	PtProcessEvent();
+! 	if (input_available())
+  	{
+! 	    PtSetResource(gui_ph_timer_timeout, Pt_ARG_TIMER_INITIAL, 0, 0);
+  	    return OK;
+  	}
+! 	else if (is_timeout == TRUE)
+  	    return FAIL;
+      }
+  }
+  
+! #if defined(FEAT_BROWSE) || defined(PROTO)
+  /*
+   * Put up a file requester.
+   * Returns the selected name in allocated memory, or NULL for Cancel.
+***************
+*** 1398,1409 ****
+      char_u  *open_text = NULL;
+  
+      flags = 0;
+!     memset( &file, 0, sizeof( file ) );
+  
+!     default_path = alloc( MAXPATHL + 1 + NAME_MAX + 1 );
+!     if( default_path != NULL )
+      {
+! 	if( saving == TRUE )
+  	{
+  	    /* Don't need Pt_FSR_CONFIRM_EXISTING, vim will ask anyway */
+  	    flags |= Pt_FSR_NO_FCHECK;
+--- 1398,1409 ----
+      char_u  *open_text = NULL;
+  
+      flags = 0;
+!     memset(&file, 0, sizeof(file));
+  
+!     default_path = alloc(MAXPATHL + 1 + NAME_MAX + 1);
+!     if (default_path != NULL)
+      {
+! 	if (saving == TRUE)
+  	{
+  	    /* Don't need Pt_FSR_CONFIRM_EXISTING, vim will ask anyway */
+  	    flags |= Pt_FSR_NO_FCHECK;
+***************
+*** 1411,1433 ****
+  	}
+  
+  	/* combine the directory and filename into a single path */
+! 	if( initdir == NULL || *initdir == NUL )
+  	{
+! 	    mch_dirname( default_path, MAXPATHL );
+  	    initdir = default_path;
+  	}
+  	else
+  	{
+! 	    STRCPY( default_path, initdir );
+  	    initdir = default_path;
+  	}
+  
+! 	if( default_name != NULL )
+  	{
+! 	    if( default_path[ STRLEN( default_path ) - 1 ] != '/' )
+! 		STRCAT( default_path, "/" );
+  
+! 	    STRCAT( default_path, default_name );
+  	}
+  
+  	/* TODO: add a filter? */
+--- 1411,1433 ----
+  	}
+  
+  	/* combine the directory and filename into a single path */
+! 	if (initdir == NULL || *initdir == NUL)
+  	{
+! 	    mch_dirname(default_path, MAXPATHL);
+  	    initdir = default_path;
+  	}
+  	else
+  	{
+! 	    STRCPY(default_path, initdir);
+  	    initdir = default_path;
+  	}
+  
+! 	if (default_name != NULL)
+  	{
+! 	    if (default_path[ STRLEN(default_path) - 1 ] != '/')
+! 		STRCAT(default_path, "/");
+  
+! 	    STRCAT(default_path, default_name);
+  	}
+  
+  	/* TODO: add a filter? */
+***************
+*** 1441,1495 ****
+  		NULL,
+  		NULL,
+  		&file,
+! 		flags );
+  
+! 	vim_free( default_path );
+  
+! 	if( file.ret == Pt_FSDIALOG_BTN1 )
+  	    return vim_strsave(file.path);
+      }
+      return NULL;
+  }
+  #endif
+  
+! #if defined( FEAT_GUI_DIALOG ) || defined( PROTO )
+  static PtWidget_t *gui_ph_dialog_text = NULL;
+  
+      static int
+! gui_ph_dialog_close( int button, void *data )
+  {
+      PtModalCtrl_t *modal_ctrl = data;
+      char_u *dialog_text, *vim_text;
+  
+!     if( gui_ph_dialog_text != NULL )
+      {
+! 	PtGetResource( gui_ph_dialog_text, Pt_ARG_TEXT_STRING, &dialog_text, 0 );
+! 	PtGetResource( gui_ph_dialog_text, Pt_ARG_POINTER, &vim_text, 0 );
+! 	STRNCPY( vim_text, dialog_text, IOSIZE - 1 );
+      }
+  
+!     PtModalUnblock( modal_ctrl, (void *) button );
+  
+      return Pt_TRUE;
+  }
+  
+      static int
+! gui_ph_dialog_text_enter( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+!     if( info->reason_subtype == Pt_EDIT_ACTIVATE )
+! 	gui_ph_dialog_close( 1, data );
+      return Pt_CONTINUE;
+  }
+  
+      static int
+! gui_ph_dialog_esc( PtWidget_t *widget, void *data, PtCallbackInfo_t *info )
+  {
+      PhKeyEvent_t *key;
+  
+!     key = PhGetData( info->event );
+!     if( ( key->key_flags & Pk_KF_Cap_Valid ) && ( key->key_cap == Pk_Escape ) )
+      {
+! 	gui_ph_dialog_close( 0, data );
+  	return Pt_CONSUME;
+      }
+      return Pt_PROCESS;
+--- 1441,1495 ----
+  		NULL,
+  		NULL,
+  		&file,
+! 		flags);
+  
+! 	vim_free(default_path);
+  
+! 	if (file.ret == Pt_FSDIALOG_BTN1)
+  	    return vim_strsave(file.path);
+      }
+      return NULL;
+  }
+  #endif
+  
+! #if defined(FEAT_GUI_DIALOG) || defined(PROTO)
+  static PtWidget_t *gui_ph_dialog_text = NULL;
+  
+      static int
+! gui_ph_dialog_close(int button, void *data)
+  {
+      PtModalCtrl_t *modal_ctrl = data;
+      char_u *dialog_text, *vim_text;
+  
+!     if (gui_ph_dialog_text != NULL)
+      {
+! 	PtGetResource(gui_ph_dialog_text, Pt_ARG_TEXT_STRING, &dialog_text, 0);
+! 	PtGetResource(gui_ph_dialog_text, Pt_ARG_POINTER, &vim_text, 0);
+! 	STRNCPY(vim_text, dialog_text, IOSIZE - 1);
+      }
+  
+!     PtModalUnblock(modal_ctrl, (void *) button);
+  
+      return Pt_TRUE;
+  }
+  
+      static int
+! gui_ph_dialog_text_enter(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+!     if (info->reason_subtype == Pt_EDIT_ACTIVATE)
+! 	gui_ph_dialog_close(1, data);
+      return Pt_CONTINUE;
+  }
+  
+      static int
+! gui_ph_dialog_esc(PtWidget_t *widget, void *data, PtCallbackInfo_t *info)
+  {
+      PhKeyEvent_t *key;
+  
+!     key = PhGetData(info->event);
+!     if ((key->key_flags & Pk_KF_Cap_Valid) && (key->key_cap == Pk_Escape))
+      {
+! 	gui_ph_dialog_close(0, data);
+  	return Pt_CONSUME;
+      }
+      return Pt_PROCESS;
+***************
+*** 1518,1557 ****
+  
+      button_count = len = i = 0;
+  
+!     if( buttons == NULL || *buttons == NUL )
+  	return -1;
+  
+      /* There is one less separator than buttons, so bump up the button count */
+      button_count = 1;
+  
+      /* Count string length and number of seperators */
+!     for( str = buttons; *str; str++ )
+      {
+  	len++;
+! 	if( *str == DLG_BUTTON_SEP )
+  	    button_count++;
+      }
+  
+!     if ( title == NULL )
+  	title = "Vim";
+  
+!     buttons_copy = alloc( len + 1 );
+!     button_array = (char_u **) alloc( button_count * sizeof( char_u * ) );
+!     if( buttons_copy != NULL && button_array != NULL )
+      {
+! 	STRCPY( buttons_copy, buttons );
+  
+  	/*
+  	 * Convert DLG_BUTTON_SEP into NUL's and fill in
+  	 * button_array with the pointer to each NUL terminated string
+  	 */
+  	str = buttons_copy;
+! 	for( i = 0; i < button_count; i++ )
+  	{
+  	    button_array[ i ] = str;
+! 	    for( ; *str; str++ )
+  	    {
+! 		if( *str == DLG_BUTTON_SEP )
+  		{
+  		    *str++ = NUL;
+  		    break;
+--- 1518,1557 ----
+  
+      button_count = len = i = 0;
+  
+!     if (buttons == NULL || *buttons == NUL)
+  	return -1;
+  
+      /* There is one less separator than buttons, so bump up the button count */
+      button_count = 1;
+  
+      /* Count string length and number of seperators */
+!     for (str = buttons; *str; str++)
+      {
+  	len++;
+! 	if (*str == DLG_BUTTON_SEP)
+  	    button_count++;
+      }
+  
+!     if (title == NULL)
+  	title = "Vim";
+  
+!     buttons_copy = alloc(len + 1);
+!     button_array = (char_u **) alloc(button_count * sizeof(char_u *));
+!     if (buttons_copy != NULL && button_array != NULL)
+      {
+! 	STRCPY(buttons_copy, buttons);
+  
+  	/*
+  	 * Convert DLG_BUTTON_SEP into NUL's and fill in
+  	 * button_array with the pointer to each NUL terminated string
+  	 */
+  	str = buttons_copy;
+! 	for (i = 0; i < button_count; i++)
+  	{
+  	    button_array[ i ] = str;
+! 	    for (; *str; str++)
+  	    {
+! 		if (*str == DLG_BUTTON_SEP)
+  		{
+  		    *str++ = NUL;
+  		    break;
+***************
+*** 1565,1571 ****
+  		NULL,
+  		message, NULL,
+  		button_count, (const char **) button_array, NULL,
+! 		default_button, 0, Pt_MODAL );
+  #else
+  	/* Writing the dialog ourselves lets us add extra features, like
+  	 * trapping the escape key and returning 0 to vim */
+--- 1565,1571 ----
+  		NULL,
+  		message, NULL,
+  		button_count, (const char **) button_array, NULL,
+! 		default_button, 0, Pt_MODAL);
+  #else
+  	/* Writing the dialog ourselves lets us add extra features, like
+  	 * trapping the escape key and returning 0 to vim */
+***************
+*** 1576,1607 ****
+  	    PtModalCtrl_t modal_ctrl;
+  	    PtDialogInfo_t di;
+  
+! 	    memset( &di, 0, sizeof( di ) );
+! 	    memset( &modal_ctrl, 0, sizeof( modal_ctrl ) );
+  
+  	    n = 0;
+! 	    PtSetArg( &args[n++], Pt_ARG_GROUP_ROWS_COLS, 0, 0 );
+! 	    PtSetArg( &args[n++], Pt_ARG_WIDTH, 350, 0 );
+! 	    PtSetArg( &args[n++], Pt_ARG_GROUP_ORIENTATION,
+! 		    Pt_GROUP_VERTICAL, 0 );
+! 	    PtSetArg( &args[n++], Pt_ARG_GROUP_FLAGS,
+! 		    Pt_TRUE, Pt_GROUP_NO_KEYS | Pt_GROUP_STRETCH_HORIZONTAL );
+! 	    PtSetArg( &args[n++], Pt_ARG_CONTAINER_FLAGS, Pt_FALSE, Pt_TRUE );
+! 	    pane = PtCreateWidget( PtGroup, NULL, n, args );
+  
+  	    n = 0;
+! 	    PtSetArg( &args[n++], Pt_ARG_TEXT_STRING, message, 0 );
+! 	    PtCreateWidget( PtLabel, pane, n, args );
+  
+! 	    if( textfield != NULL )
+  	    {
+  		n = 0;
+! 		PtSetArg( &args[n++], Pt_ARG_MAX_LENGTH, IOSIZE - 1, 0 );
+! 		PtSetArg( &args[n++], Pt_ARG_TEXT_STRING, textfield, 0 );
+! 		PtSetArg( &args[n++], Pt_ARG_POINTER, textfield, 0 );
+! 		gui_ph_dialog_text = PtCreateWidget( PtText, pane, n, args );
+! 		PtAddCallback( gui_ph_dialog_text, Pt_CB_ACTIVATE,
+! 			gui_ph_dialog_text_enter, &modal_ctrl );
+  	    }
+  
+  	    di.parent = gui.vimWindow;
+--- 1576,1607 ----
+  	    PtModalCtrl_t modal_ctrl;
+  	    PtDialogInfo_t di;
+  
+! 	    memset(&di, 0, sizeof(di));
+! 	    memset(&modal_ctrl, 0, sizeof(modal_ctrl));
+  
+  	    n = 0;
+! 	    PtSetArg(&args[n++], Pt_ARG_GROUP_ROWS_COLS, 0, 0);
+! 	    PtSetArg(&args[n++], Pt_ARG_WIDTH, 350, 0);
+! 	    PtSetArg(&args[n++], Pt_ARG_GROUP_ORIENTATION,
+! 		    Pt_GROUP_VERTICAL, 0);
+! 	    PtSetArg(&args[n++], Pt_ARG_GROUP_FLAGS,
+! 		    Pt_TRUE, Pt_GROUP_NO_KEYS | Pt_GROUP_STRETCH_HORIZONTAL);
+! 	    PtSetArg(&args[n++], Pt_ARG_CONTAINER_FLAGS, Pt_FALSE, Pt_TRUE);
+! 	    pane = PtCreateWidget(PtGroup, NULL, n, args);
+  
+  	    n = 0;
+! 	    PtSetArg(&args[n++], Pt_ARG_TEXT_STRING, message, 0);
+! 	    PtCreateWidget(PtLabel, pane, n, args);
+  
+! 	    if (textfield != NULL)
+  	    {
+  		n = 0;
+! 		PtSetArg(&args[n++], Pt_ARG_MAX_LENGTH, IOSIZE - 1, 0);
+! 		PtSetArg(&args[n++], Pt_ARG_TEXT_STRING, textfield, 0);
+! 		PtSetArg(&args[n++], Pt_ARG_POINTER, textfield, 0);
+! 		gui_ph_dialog_text = PtCreateWidget(PtText, pane, n, args);
+! 		PtAddCallback(gui_ph_dialog_text, Pt_CB_ACTIVATE,
+! 			gui_ph_dialog_text_enter, &modal_ctrl);
+  	    }
+  
+  	    di.parent = gui.vimWindow;
+***************
+*** 1616,1641 ****
+  	    di.callback = gui_ph_dialog_close;
+  	    di.data = &modal_ctrl;
+  
+! 	    dialog = PtCreateDialog( &di );
+! 	    PtAddFilterCallback( dialog, Ph_EV_KEY,
+! 		    gui_ph_dialog_esc, &modal_ctrl );
+  
+! 	    if( gui_ph_dialog_text != NULL )
+! 		PtGiveFocus( gui_ph_dialog_text, NULL );
+  
+  	    /* Open dialog, block the vim window and wait for the dialog to close */
+! 	    PtRealizeWidget( dialog );
+! 	    PtMakeModal( dialog, Ph_CURSOR_NOINPUT, Ph_CURSOR_DEFAULT_COLOR );
+! 	    dialog_result = (int) PtModalBlock( &modal_ctrl, 0 );
+  
+! 	    PtDestroyWidget( dialog );
+  	    gui_ph_dialog_text = NULL;
+  	}
+  #endif
+      }
+  
+!     vim_free( button_array );
+!     vim_free( buttons_copy );
+  
+      return dialog_result;
+  }
+--- 1616,1641 ----
+  	    di.callback = gui_ph_dialog_close;
+  	    di.data = &modal_ctrl;
+  
+! 	    dialog = PtCreateDialog(&di);
+! 	    PtAddFilterCallback(dialog, Ph_EV_KEY,
+! 		    gui_ph_dialog_esc, &modal_ctrl);
+  
+! 	    if (gui_ph_dialog_text != NULL)
+! 		PtGiveFocus(gui_ph_dialog_text, NULL);
+  
+  	    /* Open dialog, block the vim window and wait for the dialog to close */
+! 	    PtRealizeWidget(dialog);
+! 	    PtMakeModal(dialog, Ph_CURSOR_NOINPUT, Ph_CURSOR_DEFAULT_COLOR);
+! 	    dialog_result = (int) PtModalBlock(&modal_ctrl, 0);
+  
+! 	    PtDestroyWidget(dialog);
+  	    gui_ph_dialog_text = NULL;
+  	}
+  #endif
+      }
+  
+!     vim_free(button_array);
+!     vim_free(buttons_copy);
+  
+      return dialog_result;
+  }
+***************
+*** 1648,1654 ****
+  {
+      PhPoint_t *pos;
+  
+!     pos = PtWidgetPos( gui.vimWindow, NULL );
+  
+      *x = pos->x;
+      *y = pos->y;
+--- 1648,1654 ----
+  {
+      PhPoint_t *pos;
+  
+!     pos = PtWidgetPos(gui.vimWindow, NULL);
+  
+      *x = pos->x;
+      *y = pos->y;
+***************
+*** 1661,1667 ****
+  {
+      PhPoint_t pos = { x, y };
+  
+!     PtSetResource( gui.vimWindow, Pt_ARG_POS, &pos, 0 );
+  }
+  
+      void
+--- 1661,1667 ----
+  {
+      PhPoint_t pos = { x, y };
+  
+!     PtSetResource(gui.vimWindow, Pt_ARG_POS, &pos, 0);
+  }
+  
+      void
+***************
+*** 1677,1686 ****
+      window_size.h += pg_margin_top + pg_margin_bottom;
+  #endif
+  
+!     PtSetResource( gui.vimWindow, Pt_ARG_MINIMUM_DIM, &min_size, 0 );
+!     PtSetResource( gui.vimWindow, Pt_ARG_DIM, &window_size, 0 );
+  
+!     if( ! PtWidgetIsRealized( gui.vimWindow ) )
+  	gui_ph_resize_container();
+  }
+  
+--- 1677,1686 ----
+      window_size.h += pg_margin_top + pg_margin_bottom;
+  #endif
+  
+!     PtSetResource(gui.vimWindow, Pt_ARG_MINIMUM_DIM, &min_size, 0);
+!     PtSetResource(gui.vimWindow, Pt_ARG_DIM, &window_size, 0);
+  
+!     if (! PtWidgetIsRealized(gui.vimWindow))
+  	gui_ph_resize_container();
+  }
+  
+***************
+*** 1693,1700 ****
+  {
+      PhRect_t console;
+  
+!     PhWindowQueryVisible( Ph_QUERY_WORKSPACE, 0,
+! 	    PhInputGroup( NULL ), &console );
+  
+      *screen_w = console.lr.x - console.ul.x + 1;
+      *screen_h = console.lr.y - console.ul.y + 1;
+--- 1693,1700 ----
+  {
+      PhRect_t console;
+  
+!     PhWindowQueryVisible(Ph_QUERY_WORKSPACE, 0,
+! 	    PhInputGroup(NULL), &console);
+  
+      *screen_w = console.lr.x - console.ul.x + 1;
+      *screen_h = console.lr.y - console.ul.y + 1;
+***************
+*** 1705,1715 ****
+  {
+      PhWindowEvent_t event;
+  
+!     memset( &event, 0, sizeof (event) );
+      event.event_f = Ph_WM_HIDE;
+      event.event_state = Ph_WM_EVSTATE_HIDE;
+!     event.rid = PtWidgetRid( gui.vimWindow );
+!     PtForwardWindowEvent( &event );
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+--- 1705,1715 ----
+  {
+      PhWindowEvent_t event;
+  
+!     memset(&event, 0, sizeof (event));
+      event.event_f = Ph_WM_HIDE;
+      event.event_state = Ph_WM_EVSTATE_HIDE;
+!     event.rid = PtWidgetRid(gui.vimWindow);
+!     PtForwardWindowEvent(&event);
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+***************
+*** 1721,1731 ****
+  {
+      PhWindowEvent_t event;
+  
+!     memset( &event, 0, sizeof (event) );
+      event.event_f = Ph_WM_TOFRONT;
+      event.event_state = Ph_WM_EVSTATE_FFRONT;
+!     event.rid = PtWidgetRid( gui.vimWindow );
+!     PtForwardWindowEvent( &event );
+  }
+  #endif
+  
+--- 1721,1731 ----
+  {
+      PhWindowEvent_t event;
+  
+!     memset(&event, 0, sizeof (event));
+      event.event_f = Ph_WM_TOFRONT;
+      event.event_state = Ph_WM_EVSTATE_FFRONT;
+!     event.rid = PtWidgetRid(gui.vimWindow);
+!     PtForwardWindowEvent(&event);
+  }
+  #endif
+  
+***************
+*** 1733,1741 ****
+  gui_mch_settitle(char_u *title,	char_u *icon)
+  {
+  #ifdef USE_PANEL_GROUP
+!     gui_ph_pg_set_buffer_num( curwin->w_buffer->b_fnum );
+  #endif
+!     PtSetResource( gui.vimWindow, Pt_ARG_WINDOW_TITLE, title, 0 );
+      /* Not sure what to do with the icon text, set balloon text somehow? */
+  }
+  
+--- 1733,1741 ----
+  gui_mch_settitle(char_u *title,	char_u *icon)
+  {
+  #ifdef USE_PANEL_GROUP
+!     gui_ph_pg_set_buffer_num(curwin->w_buffer->b_fnum);
+  #endif
+!     PtSetResource(gui.vimWindow, Pt_ARG_WINDOW_TITLE, title, 0);
+      /* Not sure what to do with the icon text, set balloon text somehow? */
+  }
+  
+***************
+*** 1748,1757 ****
+      int	    n = 0;
+      PtArg_t args[3];
+  
+!     PtSetArg( &args[ n++ ], Pt_ARG_MAXIMUM, max, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_SLIDER_SIZE, size, 0 );
+!     PtSetArg( &args[ n++ ], Pt_ARG_GAUGE_VALUE, val, 0 );
+!     PtSetResources( sb->id, n, args );
+  }
+  
+      void
+--- 1748,1757 ----
+      int	    n = 0;
+      PtArg_t args[3];
+  
+!     PtSetArg(&args[ n++ ], Pt_ARG_MAXIMUM, max, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_SLIDER_SIZE, size, 0);
+!     PtSetArg(&args[ n++ ], Pt_ARG_GAUGE_VALUE, val, 0);
+!     PtSetResources(sb->id, n, args);
+  }
+  
+      void
+***************
+*** 1759,1765 ****
+  {
+      PhArea_t area = {{ x, y }, { w, h }};
+  
+!     PtSetResource( sb->id, Pt_ARG_AREA, &area, 0 );
+  }
+  
+      void
+--- 1759,1765 ----
+  {
+      PhArea_t area = {{ x, y }, { w, h }};
+  
+!     PtSetResource(sb->id, Pt_ARG_AREA, &area, 0);
+  }
+  
+      void
+***************
+*** 1775,1786 ****
+       *
+       * Also, don't let the scrollbar get focus
+       */
+!     PtSetArg( &args[ n++ ], Pt_ARG_FLAGS, Pt_DELAY_REALIZE,
+! 	    Pt_DELAY_REALIZE | Pt_GETS_FOCUS );
+!     PtSetArg( &args[ n++ ], Pt_ARG_SCROLLBAR_FLAGS, Pt_SCROLLBAR_SHOW_ARROWS, 0);
+  #if 0
+      /* Don't need this anchoring for the scrollbars */
+!     if( orient == SBAR_HORIZ )
+      {
+  	anchor_flags = Pt_BOTTOM_ANCHORED_BOTTOM |
+  	    Pt_LEFT_ANCHORED_LEFT | Pt_RIGHT_ANCHORED_RIGHT;
+--- 1775,1786 ----
+       *
+       * Also, don't let the scrollbar get focus
+       */
+!     PtSetArg(&args[ n++ ], Pt_ARG_FLAGS, Pt_DELAY_REALIZE,
+! 	    Pt_DELAY_REALIZE | Pt_GETS_FOCUS);
+!     PtSetArg(&args[ n++ ], Pt_ARG_SCROLLBAR_FLAGS, Pt_SCROLLBAR_SHOW_ARROWS, 0);
+  #if 0
+      /* Don't need this anchoring for the scrollbars */
+!     if (orient == SBAR_HORIZ)
+      {
+  	anchor_flags = Pt_BOTTOM_ANCHORED_BOTTOM |
+  	    Pt_LEFT_ANCHORED_LEFT | Pt_RIGHT_ANCHORED_RIGHT;
+***************
+*** 1788,1827 ****
+      else
+      {
+  	anchor_flags = Pt_BOTTOM_ANCHORED_BOTTOM | Pt_TOP_ANCHORED_TOP;
+! 	if( sb->wp != NULL )
+  	{
+! 	    if( sb == &sb->wp->w_scrollbars[ SBAR_LEFT ] )
+  		anchor_flags |= Pt_LEFT_ANCHORED_LEFT;
+  	    else
+  		anchor_flags |= Pt_RIGHT_ANCHORED_RIGHT;
+  	}
+      }
+!     PtSetArg( &args[ n++ ], Pt_ARG_ANCHOR_FLAGS, anchor_flags, Pt_IS_ANCHORED );
+  #endif
+!     PtSetArg( &args[ n++ ], Pt_ARG_ORIENTATION,
+! 	    (orient == SBAR_HORIZ) ? Pt_HORIZONTAL : Pt_VERTICAL, 0 );
+  #ifdef USE_PANEL_GROUP
+!     sb->id = PtCreateWidget( PtScrollbar, gui.vimPanelGroup, n, args );
+  #else
+!     sb->id = PtCreateWidget( PtScrollbar, gui.vimContainer, n, args );
+  #endif
+  
+!     PtAddCallback( sb->id, Pt_CB_SCROLLBAR_MOVE, gui_ph_handle_scrollbar, sb );
+  }
+  
+      void
+  gui_mch_enable_scrollbar(scrollbar_T *sb, int flag)
+  {
+!     if( flag != 0 )
+! 	PtRealizeWidget( sb->id );
+      else
+! 	PtUnrealizeWidget( sb->id );
+  }
+  
+      void
+  gui_mch_destroy_scrollbar(scrollbar_T *sb)
+  {
+!     PtDestroyWidget( sb->id );
+      sb->id = NULL;
+  }
+  
+--- 1788,1827 ----
+      else
+      {
+  	anchor_flags = Pt_BOTTOM_ANCHORED_BOTTOM | Pt_TOP_ANCHORED_TOP;
+! 	if (sb->wp != NULL)
+  	{
+! 	    if (sb == &sb->wp->w_scrollbars[ SBAR_LEFT ])
+  		anchor_flags |= Pt_LEFT_ANCHORED_LEFT;
+  	    else
+  		anchor_flags |= Pt_RIGHT_ANCHORED_RIGHT;
+  	}
+      }
+!     PtSetArg(&args[ n++ ], Pt_ARG_ANCHOR_FLAGS, anchor_flags, Pt_IS_ANCHORED);
+  #endif
+!     PtSetArg(&args[ n++ ], Pt_ARG_ORIENTATION,
+! 	    (orient == SBAR_HORIZ) ? Pt_HORIZONTAL : Pt_VERTICAL, 0);
+  #ifdef USE_PANEL_GROUP
+!     sb->id = PtCreateWidget(PtScrollbar, gui.vimPanelGroup, n, args);
+  #else
+!     sb->id = PtCreateWidget(PtScrollbar, gui.vimContainer, n, args);
+  #endif
+  
+!     PtAddCallback(sb->id, Pt_CB_SCROLLBAR_MOVE, gui_ph_handle_scrollbar, sb);
+  }
+  
+      void
+  gui_mch_enable_scrollbar(scrollbar_T *sb, int flag)
+  {
+!     if (flag != 0)
+! 	PtRealizeWidget(sb->id);
+      else
+! 	PtUnrealizeWidget(sb->id);
+  }
+  
+      void
+  gui_mch_destroy_scrollbar(scrollbar_T *sb)
+  {
+!     PtDestroyWidget(sb->id);
+      sb->id = NULL;
+  }
+  
+***************
+*** 1866,1873 ****
+  	return;
+  
+      if (shape == MSHAPE_HIDE || gui.pointer_hidden)
+! 	PtSetResource( gui.vimTextArea, Pt_ARG_CURSOR_TYPE, Ph_CURSOR_NONE,
+! 		0 );
+      else
+      {
+  	if (shape >= MSHAPE_NUMBERED)
+--- 1866,1873 ----
+  	return;
+  
+      if (shape == MSHAPE_HIDE || gui.pointer_hidden)
+! 	PtSetResource(gui.vimTextArea, Pt_ARG_CURSOR_TYPE, Ph_CURSOR_NONE,
+! 		0);
+      else
+      {
+  	if (shape >= MSHAPE_NUMBERED)
+***************
+*** 1875,1881 ****
+  	else
+  	    id = mshape_ids[shape];
+  
+! 	PtSetResource( gui.vimTextArea, Pt_ARG_CURSOR_TYPE, id,	0 );
+      }
+      if (shape != MSHAPE_HIDE)
+  	last_shape = shape;
+--- 1875,1881 ----
+  	else
+  	    id = mshape_ids[shape];
+  
+! 	PtSetResource(gui.vimTextArea, Pt_ARG_CURSOR_TYPE, id,	0);
+      }
+      if (shape != MSHAPE_HIDE)
+  	last_shape = shape;
+***************
+*** 1885,1903 ****
+      void
+  gui_mch_mousehide(int hide)
+  {
+!     if( gui.pointer_hidden != hide )
+      {
+  	gui.pointer_hidden = hide;
+  #ifdef FEAT_MOUSESHAPE
+! 	if( hide )
+! 	    PtSetResource( gui.vimTextArea, Pt_ARG_CURSOR_TYPE,
+! 		    Ph_CURSOR_NONE, 0 );
+  	else
+! 	    mch_set_mouse_shape( last_shape );
+  #else
+! 	PtSetResource( gui.vimTextArea, Pt_ARG_CURSOR_TYPE,
+! 		( hide == MOUSE_SHOW ) ? GUI_PH_MOUSE_TYPE : Ph_CURSOR_NONE,
+! 		0 );
+  #endif
+      }
+  }
+--- 1885,1903 ----
+      void
+  gui_mch_mousehide(int hide)
+  {
+!     if (gui.pointer_hidden != hide)
+      {
+  	gui.pointer_hidden = hide;
+  #ifdef FEAT_MOUSESHAPE
+! 	if (hide)
+! 	    PtSetResource(gui.vimTextArea, Pt_ARG_CURSOR_TYPE,
+! 		    Ph_CURSOR_NONE, 0);
+  	else
+! 	    mch_set_mouse_shape(last_shape);
+  #else
+! 	PtSetResource(gui.vimTextArea, Pt_ARG_CURSOR_TYPE,
+! 		(hide == MOUSE_SHOW) ? GUI_PH_MOUSE_TYPE : Ph_CURSOR_NONE,
+! 		0);
+  #endif
+      }
+  }
+***************
+*** 1910,1917 ****
+  
+      /* FIXME: does this return the correct position,
+       * with respect to the border? */
+!     PhQueryCursor( PhInputGroup( NULL ), &info );
+!     PtGetAbsPosition( gui.vimTextArea , &ix, &iy );
+  
+      *x = info.pos.x - ix;
+      *y = info.pos.y - iy;
+--- 1910,1917 ----
+  
+      /* FIXME: does this return the correct position,
+       * with respect to the border? */
+!     PhQueryCursor(PhInputGroup(NULL), &info);
+!     PtGetAbsPosition(gui.vimTextArea , &ix, &iy);
+  
+      *x = info.pos.x - ix;
+      *y = info.pos.y - iy;
+***************
+*** 1922,1930 ****
+  {
+      short abs_x, abs_y;
+  
+!     PtGetAbsPosition( gui.vimTextArea, &abs_x, &abs_y );
+      /* Add the border offset? */
+!     PhMoveCursorAbs( PhInputGroup( NULL ), abs_x + x, abs_y + y );
+  }
+  
+  /****************************************************************************/
+--- 1922,1930 ----
+  {
+      short abs_x, abs_y;
+  
+!     PtGetAbsPosition(gui.vimTextArea, &abs_x, &abs_y);
+      /* Add the border offset? */
+!     PhMoveCursorAbs(PhInputGroup(NULL), abs_x + x, abs_y + y);
+  }
+  
+  /****************************************************************************/
+***************
+*** 1952,1974 ****
+      color_diff = gui_get_lightness(gui_ph_mouse_color)
+  					  - gui_get_lightness(gui.back_pixel);
+  
+!     if( abs( color_diff ) < 64 )
+      {
+  	short r, g, b;
+  	/* not a great algorithm... */
+! 	r = PgRedValue( gui_ph_mouse_color ) ^ 255;
+! 	g = PgGreenValue( gui_ph_mouse_color ) ^ 255;
+! 	b = PgBlueValue( gui_ph_mouse_color ) ^ 255;
+  
+  #ifndef FEAT_MOUSESHAPE
+! 	gui_ph_mouse_color = PgRGB( r, g, b );
+! 	PtSetResource( gui.vimTextArea, Pt_ARG_CURSOR_COLOR,
+! 		gui_ph_mouse_color, 0 );
+  #endif
+      }
+  #endif
+  
+!     PtSetResource( gui.vimTextArea, Pt_ARG_FILL_COLOR, gui.back_pixel, 0 );
+  }
+  
+      static int
+--- 1952,1974 ----
+      color_diff = gui_get_lightness(gui_ph_mouse_color)
+  					  - gui_get_lightness(gui.back_pixel);
+  
+!     if (abs(color_diff) < 64)
+      {
+  	short r, g, b;
+  	/* not a great algorithm... */
+! 	r = PgRedValue(gui_ph_mouse_color) ^ 255;
+! 	g = PgGreenValue(gui_ph_mouse_color) ^ 255;
+! 	b = PgBlueValue(gui_ph_mouse_color) ^ 255;
+  
+  #ifndef FEAT_MOUSESHAPE
+! 	gui_ph_mouse_color = PgRGB(r, g, b);
+! 	PtSetResource(gui.vimTextArea, Pt_ARG_CURSOR_COLOR,
+! 		gui_ph_mouse_color, 0);
+  #endif
+      }
+  #endif
+  
+!     PtSetResource(gui.vimTextArea, Pt_ARG_FILL_COLOR, gui.back_pixel, 0);
+  }
+  
+      static int
+***************
+*** 2058,2076 ****
+      };
+  
+      /* is name #rrggbb format? */
+!     if( name[0] == '#' && STRLEN( name ) == 7 )
+      {
+! 	r = hex_digit( name[1] ) * 16 + hex_digit( name[2] );
+! 	g = hex_digit( name[3] ) * 16 + hex_digit( name[4] );
+! 	b = hex_digit( name[5] ) * 16 + hex_digit( name[6] );
+! 	if( r < 0 || g < 0 || b < 0 )
+  	    return INVALCOLOR;
+  	return RGB(r, g, b);
+      }
+  
+!     for( i = 0; i < ARRAY_LENGTH( table ); i++ )
+      {
+! 	if( STRICMP( name, table[i].name ) == 0 )
+  	    return table[i].colour;
+      }
+  
+--- 2058,2076 ----
+      };
+  
+      /* is name #rrggbb format? */
+!     if (name[0] == '#' && STRLEN(name) == 7)
+      {
+! 	r = hex_digit(name[1]) * 16 + hex_digit(name[2]);
+! 	g = hex_digit(name[3]) * 16 + hex_digit(name[4]);
+! 	b = hex_digit(name[5]) * 16 + hex_digit(name[6]);
+! 	if (r < 0 || g < 0 || b < 0)
+  	    return INVALCOLOR;
+  	return RGB(r, g, b);
+      }
+  
+!     for (i = 0; i < ARRAY_LENGTH(table); i++)
+      {
+! 	if (STRICMP(name, table[i].name) == 0)
+  	    return table[i].colour;
+      }
+  
+***************
+*** 2129,2141 ****
+      void
+  gui_mch_set_fg_color(guicolor_T color)
+  {
+!     PgSetTextColor( color );
+  }
+  
+      void
+  gui_mch_set_bg_color(guicolor_T color)
+  {
+!     PgSetFillColor( color );
+  }
+  
+      void
+--- 2129,2141 ----
+      void
+  gui_mch_set_fg_color(guicolor_T color)
+  {
+!     PgSetTextColor(color);
+  }
+  
+      void
+  gui_mch_set_bg_color(guicolor_T color)
+  {
+!     PgSetFillColor(color);
+  }
+  
+      void
+***************
+*** 2148,2168 ****
+  {
+      PhRect_t rect;
+  
+!     rect.ul.x = FILL_X( col );
+!     rect.ul.y = FILL_Y( row );
+  
+      /* FIXME: This has an off by one pixel problem */
+      rect.lr.x = rect.ul.x + nc * gui.char_width;
+      rect.lr.y = rect.ul.y + nr * gui.char_height;
+!     if( nc > 0 )
+  	rect.lr.x -= 1;
+!     if( nr > 0 )
+  	rect.lr.y -= 1;
+  
+      DRAW_START;
+!     PgSetDrawMode( Pg_DrawModeDSTINVERT );
+!     PgDrawRect( &rect, Pg_DRAW_FILL );
+!     PgSetDrawMode( Pg_DrawModeSRCCOPY );
+      DRAW_END;
+  }
+  
+--- 2148,2168 ----
+  {
+      PhRect_t rect;
+  
+!     rect.ul.x = FILL_X(col);
+!     rect.ul.y = FILL_Y(row);
+  
+      /* FIXME: This has an off by one pixel problem */
+      rect.lr.x = rect.ul.x + nc * gui.char_width;
+      rect.lr.y = rect.ul.y + nr * gui.char_height;
+!     if (nc > 0)
+  	rect.lr.x -= 1;
+!     if (nr > 0)
+  	rect.lr.y -= 1;
+  
+      DRAW_START;
+!     PgSetDrawMode(Pg_DrawModeDSTINVERT);
+!     PgDrawRect(&rect, Pg_DRAW_FILL);
+!     PgSetDrawMode(Pg_DrawModeSRCCOPY);
+      DRAW_END;
+  }
+  
+***************
+*** 2170,2182 ****
+  gui_mch_clear_block(int row1, int col1, int row2, int col2)
+  {
+      PhRect_t block = {
+! 	{ FILL_X( col1 ), FILL_Y( row1 ) },
+! 	{ FILL_X( col2 + 1 ) - 1, FILL_Y( row2 + 1 ) - 1}
+      };
+  
+      DRAW_START;
+!     gui_mch_set_bg_color( gui.back_pixel );
+!     PgDrawRect( &block, Pg_DRAW_FILL );
+      DRAW_END;
+  }
+  
+--- 2170,2182 ----
+  gui_mch_clear_block(int row1, int col1, int row2, int col2)
+  {
+      PhRect_t block = {
+! 	{ FILL_X(col1), FILL_Y(row1) },
+! 	{ FILL_X(col2 + 1) - 1, FILL_Y(row2 + 1) - 1}
+      };
+  
+      DRAW_START;
+!     gui_mch_set_bg_color(gui.back_pixel);
+!     PgDrawRect(&block, Pg_DRAW_FILL);
+      DRAW_END;
+  }
+  
+***************
+*** 2189,2200 ****
+  	    Rows * gui.char_height + gui.border_width - 1 }
+      };
+  
+!     if( is_ignore_draw == TRUE )
+  	return;
+  
+      DRAW_START;
+!     gui_mch_set_bg_color( gui.back_pixel );
+!     PgDrawRect( &text_rect, Pg_DRAW_FILL );
+      DRAW_END;
+  }
+  
+--- 2189,2200 ----
+  	    Rows * gui.char_height + gui.border_width - 1 }
+      };
+  
+!     if (is_ignore_draw == TRUE)
+  	return;
+  
+      DRAW_START;
+!     gui_mch_set_bg_color(gui.back_pixel);
+!     PgDrawRect(&text_rect, Pg_DRAW_FILL);
+      DRAW_END;
+  }
+  
+***************
+*** 2204,2231 ****
+      PhRect_t    rect;
+      PhPoint_t   delta;
+  
+!     rect.ul.x = FILL_X( gui.scroll_region_left );
+!     rect.ul.y = FILL_Y( row + num_lines );
+  
+!     rect.lr.x = FILL_X( gui.scroll_region_right + 1 ) - 1;
+!     rect.lr.y = FILL_Y( gui.scroll_region_bot + 1) - 1;
+  
+!     PtWidgetOffset( gui.vimTextArea, &gui_ph_raw_offset );
+!     PhTranslatePoint( &gui_ph_raw_offset, PtWidgetPos(gui.vimTextArea, NULL));
+!     PhTranslateRect( &rect, &gui_ph_raw_offset );
+  
+      delta.x = 0;
+      delta.y = -num_lines * gui.char_height;
+  
+      PgFlush();
+  
+!     PhBlit( PtWidgetRid( PtFindDisjoint( gui.vimTextArea ) ), &rect, &delta );
+  
+      gui_clear_block(
+  	gui.scroll_region_bot - num_lines + 1,
+  	gui.scroll_region_left,
+  	gui.scroll_region_bot,
+! 	gui.scroll_region_right );
+  }
+  
+      void
+--- 2204,2231 ----
+      PhRect_t    rect;
+      PhPoint_t   delta;
+  
+!     rect.ul.x = FILL_X(gui.scroll_region_left);
+!     rect.ul.y = FILL_Y(row + num_lines);
+  
+!     rect.lr.x = FILL_X(gui.scroll_region_right + 1) - 1;
+!     rect.lr.y = FILL_Y(gui.scroll_region_bot + 1) - 1;
+  
+!     PtWidgetOffset(gui.vimTextArea, &gui_ph_raw_offset);
+!     PhTranslatePoint(&gui_ph_raw_offset, PtWidgetPos(gui.vimTextArea, NULL));
+!     PhTranslateRect(&rect, &gui_ph_raw_offset);
+  
+      delta.x = 0;
+      delta.y = -num_lines * gui.char_height;
+  
+      PgFlush();
+  
+!     PhBlit(PtWidgetRid(PtFindDisjoint(gui.vimTextArea)), &rect, &delta);
+  
+      gui_clear_block(
+  	gui.scroll_region_bot - num_lines + 1,
+  	gui.scroll_region_left,
+  	gui.scroll_region_bot,
+! 	gui.scroll_region_right);
+  }
+  
+      void
+***************
+*** 2234,2258 ****
+      PhRect_t    rect;
+      PhPoint_t   delta;
+  
+!     rect.ul.x = FILL_X( gui.scroll_region_left );
+!     rect.ul.y = FILL_Y( row );
+  
+!     rect.lr.x = FILL_X( gui.scroll_region_right + 1 ) - 1;
+!     rect.lr.y = FILL_Y( gui.scroll_region_bot - num_lines + 1 ) - 1;
+  
+!     PtWidgetOffset( gui.vimTextArea, &gui_ph_raw_offset );
+!     PhTranslatePoint( &gui_ph_raw_offset, PtWidgetPos( gui.vimTextArea, NULL ) );
+!     PhTranslateRect( &rect, &gui_ph_raw_offset );
+  
+      delta.x = 0;
+      delta.y = num_lines * gui.char_height;
+  
+      PgFlush();
+  
+!     PhBlit( PtWidgetRid( PtFindDisjoint( gui.vimTextArea ) ) , &rect, &delta );
+  
+!     gui_clear_block( row, gui.scroll_region_left,
+! 	    row + num_lines - 1, gui.scroll_region_right );
+  }
+  
+      void
+--- 2234,2258 ----
+      PhRect_t    rect;
+      PhPoint_t   delta;
+  
+!     rect.ul.x = FILL_X(gui.scroll_region_left);
+!     rect.ul.y = FILL_Y(row);
+  
+!     rect.lr.x = FILL_X(gui.scroll_region_right + 1) - 1;
+!     rect.lr.y = FILL_Y(gui.scroll_region_bot - num_lines + 1) - 1;
+  
+!     PtWidgetOffset(gui.vimTextArea, &gui_ph_raw_offset);
+!     PhTranslatePoint(&gui_ph_raw_offset, PtWidgetPos(gui.vimTextArea, NULL));
+!     PhTranslateRect(&rect, &gui_ph_raw_offset);
+  
+      delta.x = 0;
+      delta.y = num_lines * gui.char_height;
+  
+      PgFlush();
+  
+!     PhBlit(PtWidgetRid(PtFindDisjoint(gui.vimTextArea)) , &rect, &delta);
+  
+!     gui_clear_block(row, gui.scroll_region_left,
+! 	    row + num_lines - 1, gui.scroll_region_right);
+  }
+  
+      void
+***************
+*** 2261,2297 ****
+      static char *utf8_buffer = NULL;
+      static int	utf8_len = 0;
+  
+!     PhPoint_t	pos = { TEXT_X( col ), TEXT_Y( row ) };
+      PhRect_t	rect;
+  
+!     if( is_ignore_draw == TRUE )
+  	return;
+  
+      DRAW_START;
+  
+!     if( !( flags & DRAW_TRANSP ) )
+      {
+  	PgDrawIRect(
+! 		FILL_X( col ), FILL_Y( row ),
+! 		FILL_X( col + len ) - 1, FILL_Y( row + 1 ) - 1,
+! 		Pg_DRAW_FILL );
+      }
+  
+!     if( flags & DRAW_UNDERL )
+! 	PgSetUnderline( gui.norm_pixel, Pg_TRANSPARENT, 0 );
+  
+!     if( charset_translate != NULL
+  #ifdef FEAT_MBYTE
+  	    && enc_utf8 == 0
+  #endif
+! 	    )
+      {
+  	int src_taken, dst_made;
+  
+  	/* Use a static buffer to avoid large amounts of de/allocations */
+! 	if( utf8_len < len )
+  	{
+! 	    utf8_buffer = realloc( utf8_buffer, len * MB_LEN_MAX );
+  	    utf8_len = len;
+  	}
+  
+--- 2261,2297 ----
+      static char *utf8_buffer = NULL;
+      static int	utf8_len = 0;
+  
+!     PhPoint_t	pos = { TEXT_X(col), TEXT_Y(row) };
+      PhRect_t	rect;
+  
+!     if (is_ignore_draw == TRUE)
+  	return;
+  
+      DRAW_START;
+  
+!     if (!(flags & DRAW_TRANSP))
+      {
+  	PgDrawIRect(
+! 		FILL_X(col), FILL_Y(row),
+! 		FILL_X(col + len) - 1, FILL_Y(row + 1) - 1,
+! 		Pg_DRAW_FILL);
+      }
+  
+!     if (flags & DRAW_UNDERL)
+! 	PgSetUnderline(gui.norm_pixel, Pg_TRANSPARENT, 0);
+  
+!     if (charset_translate != NULL
+  #ifdef FEAT_MBYTE
+  	    && enc_utf8 == 0
+  #endif
+! 	   )
+      {
+  	int src_taken, dst_made;
+  
+  	/* Use a static buffer to avoid large amounts of de/allocations */
+! 	if (utf8_len < len)
+  	{
+! 	    utf8_buffer = realloc(utf8_buffer, len * MB_LEN_MAX);
+  	    utf8_len = len;
+  	}
+  
+***************
+*** 2302,2337 ****
+  		&src_taken,
+  		utf8_buffer,
+  		utf8_len,
+! 		&dst_made );
+  	s = utf8_buffer;
+  	len = dst_made;
+      }
+  
+!     PgDrawText( s, len, &pos, 0 );
+  
+!     if( flags & DRAW_BOLD )
+      {
+  	/* FIXME: try and only calculate these values once... */
+! 	rect.ul.x = FILL_X( col ) + 1;
+! 	rect.ul.y = FILL_Y( row );
+! 	rect.lr.x = FILL_X( col + len ) - 1;
+! 	rect.lr.y = FILL_Y( row + 1) - 1;
+! 	/* PgSetUserClip( NULL ) causes the scrollbar to not redraw... */
+  #if 0
+  	pos.x++;
+  
+! 	PgSetUserClip( &rect );
+! 	PgDrawText( s, len, &pos, 0 );
+! 	PgSetUserClip( NULL );
+  #else
+! 	rect.lr.y -= ( p_linespace + 1 ) / 2;
+  	/* XXX: DrawTextArea doesn't work with phditto */
+! 	PgDrawTextArea( s, len, &rect, Pg_TEXT_BOTTOM );
+  #endif
+      }
+  
+!     if( flags & DRAW_UNDERL )
+! 	PgSetUnderline( Pg_TRANSPARENT, Pg_TRANSPARENT, 0 );
+  
+      DRAW_END;
+  }
+--- 2302,2337 ----
+  		&src_taken,
+  		utf8_buffer,
+  		utf8_len,
+! 		&dst_made);
+  	s = utf8_buffer;
+  	len = dst_made;
+      }
+  
+!     PgDrawText(s, len, &pos, 0);
+  
+!     if (flags & DRAW_BOLD)
+      {
+  	/* FIXME: try and only calculate these values once... */
+! 	rect.ul.x = FILL_X(col) + 1;
+! 	rect.ul.y = FILL_Y(row);
+! 	rect.lr.x = FILL_X(col + len) - 1;
+! 	rect.lr.y = FILL_Y(row + 1) - 1;
+! 	/* PgSetUserClip(NULL) causes the scrollbar to not redraw... */
+  #if 0
+  	pos.x++;
+  
+! 	PgSetUserClip(&rect);
+! 	PgDrawText(s, len, &pos, 0);
+! 	PgSetUserClip(NULL);
+  #else
+! 	rect.lr.y -= (p_linespace + 1) / 2;
+  	/* XXX: DrawTextArea doesn't work with phditto */
+! 	PgDrawTextArea(s, len, &rect, Pg_TEXT_BOTTOM);
+  #endif
+      }
+  
+!     if (flags & DRAW_UNDERL)
+! 	PgSetUnderline(Pg_TRANSPARENT, Pg_TRANSPARENT, 0);
+  
+      DRAW_END;
+  }
+***************
+*** 2346,2359 ****
+  
+      /* FIXME: Double width characters */
+  
+!     r.ul.x = FILL_X( gui.col );
+!     r.ul.y = FILL_Y( gui.row );
+      r.lr.x = r.ul.x + gui.char_width - 1;
+      r.lr.y = r.ul.y + gui.char_height - 1;
+  
+      DRAW_START;
+!     PgSetStrokeColor( color );
+!     PgDrawRect( &r, Pg_DRAW_STROKE );
+      DRAW_END;
+  }
+  
+--- 2346,2359 ----
+  
+      /* FIXME: Double width characters */
+  
+!     r.ul.x = FILL_X(gui.col);
+!     r.ul.y = FILL_Y(gui.row);
+      r.lr.x = r.ul.x + gui.char_width - 1;
+      r.lr.y = r.ul.y + gui.char_height - 1;
+  
+      DRAW_START;
+!     PgSetStrokeColor(color);
+!     PgDrawRect(&r, Pg_DRAW_STROKE);
+      DRAW_END;
+  }
+  
+***************
+*** 2362,2375 ****
+  {
+      PhRect_t r;
+  
+!     r.ul.x = FILL_X( gui.col );
+!     r.ul.y = FILL_Y( gui.row ) + gui.char_height - h;
+      r.lr.x = r.ul.x + w - 1;
+      r.lr.y = r.ul.y + h - 1;
+  
+      DRAW_START;
+!     gui_mch_set_bg_color( color );
+!     PgDrawRect( &r, Pg_DRAW_FILL );
+      DRAW_END;
+  }
+  
+--- 2362,2375 ----
+  {
+      PhRect_t r;
+  
+!     r.ul.x = FILL_X(gui.col);
+!     r.ul.y = FILL_Y(gui.row) + gui.char_height - h;
+      r.lr.x = r.ul.x + w - 1;
+      r.lr.y = r.ul.y + h - 1;
+  
+      DRAW_START;
+!     gui_mch_set_bg_color(color);
+!     PgDrawRect(&r, Pg_DRAW_FILL);
+      DRAW_END;
+  }
+  
+***************
+*** 2385,2394 ****
+  gui_mch_start_blink(void)
+  {
+      /* Only turn on the timer on if none of the times are zero */
+!     if( blink_waittime && blink_ontime && blink_offtime && gui.in_focus)
+      {
+! 	PtSetResource( gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_waittime, 0 );
+  	blink_state = BLINK_ON;
+  	gui_update_cursor(TRUE, FALSE);
+      }
+--- 2385,2394 ----
+  gui_mch_start_blink(void)
+  {
+      /* Only turn on the timer on if none of the times are zero */
+!     if (blink_waittime && blink_ontime && blink_offtime && gui.in_focus)
+      {
+! 	PtSetResource(gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL,
+! 		blink_waittime, 0);
+  	blink_state = BLINK_ON;
+  	gui_update_cursor(TRUE, FALSE);
+      }
+***************
+*** 2397,2405 ****
+      void
+  gui_mch_stop_blink(void)
+  {
+!     PtSetResource( gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL, 0, 0 );
+  
+!     if( blink_state == BLINK_OFF )
+  	gui_update_cursor(TRUE, FALSE);
+  
+      blink_state = BLINK_NONE;
+--- 2397,2405 ----
+      void
+  gui_mch_stop_blink(void)
+  {
+!     PtSetResource(gui_ph_timer_cursor, Pt_ARG_TIMER_INITIAL, 0, 0);
+  
+!     if (blink_state == BLINK_OFF)
+  	gui_update_cursor(TRUE, FALSE);
+  
+      blink_state = BLINK_NONE;
+***************
+*** 2417,2431 ****
+      void
+  gui_mch_flash(int msec)
+  {
+!     PgSetFillXORColor( Pg_BLACK, Pg_WHITE );
+!     PgSetDrawMode( Pg_DRAWMODE_XOR );
+      gui_mch_clear_all();
+      gui_mch_flush();
+  
+!     ui_delay( (long) msec, TRUE );
+  
+      gui_mch_clear_all();
+!     PgSetDrawMode( Pg_DRAWMODE_OPAQUE );
+      gui_mch_flush();
+  }
+  
+--- 2417,2431 ----
+      void
+  gui_mch_flash(int msec)
+  {
+!     PgSetFillXORColor(Pg_BLACK, Pg_WHITE);
+!     PgSetDrawMode(Pg_DRAWMODE_XOR);
+      gui_mch_clear_all();
+      gui_mch_flush();
+  
+!     ui_delay((long) msec, TRUE);
+  
+      gui_mch_clear_all();
+!     PgSetDrawMode(Pg_DRAWMODE_OPAQUE);
+      gui_mch_flush();
+  }
+  
+***************
+*** 2440,2446 ****
+  {
+      PhArea_t area = {{x, y}, {w, h}};
+  
+!     PtSetResource( gui.vimTextArea, Pt_ARG_AREA, &area, 0 );
+  }
+  
+      int
+--- 2440,2446 ----
+  {
+      PhArea_t area = {{x, y}, {w, h}};
+  
+!     PtSetResource(gui.vimTextArea, Pt_ARG_AREA, &area, 0);
+  }
+  
+      int
+***************
+*** 2496,2514 ****
+  };
+  
+  static PhImage_t *
+! gui_ph_toolbar_load_icon( char_u *iconfile )
+  {
+      static PhImage_t external_icon;
+      PhImage_t *temp_phi = NULL;
+  
+!     temp_phi = PxLoadImage( iconfile, NULL );
+!     if( temp_phi != NULL )
+      {
+  	/* The label widget will free the image/palette/etc. for us when
+  	 * it's destroyed */
+  	temp_phi->flags |= Ph_RELEASE_IMAGE_ALL;
+! 	memcpy( &external_icon, temp_phi, sizeof( external_icon ) );
+! 	free( temp_phi );
+  
+  	temp_phi = &external_icon;
+      }
+--- 2496,2514 ----
+  };
+  
+  static PhImage_t *
+! gui_ph_toolbar_load_icon(char_u *iconfile)
+  {
+      static PhImage_t external_icon;
+      PhImage_t *temp_phi = NULL;
+  
+!     temp_phi = PxLoadImage(iconfile, NULL);
+!     if (temp_phi != NULL)
+      {
+  	/* The label widget will free the image/palette/etc. for us when
+  	 * it's destroyed */
+  	temp_phi->flags |= Ph_RELEASE_IMAGE_ALL;
+! 	memcpy(&external_icon, temp_phi, sizeof(external_icon));
+! 	free(temp_phi);
+  
+  	temp_phi = &external_icon;
+      }
+***************
+*** 2523,2551 ****
+   * PhImage_t are copied, and the original PhImage_t aren't needed anymore).
+   */
+  static PhImage_t *
+! gui_ph_toolbar_find_icon( vimmenu_T *menu )
+  {
+      char_u full_pathname[ MAXPATHL + 1 ];
+      PhImage_t *icon = NULL;
+  
+!     if( menu->icon_builtin == FALSE )
+      {
+! 	if( menu->iconfile != NULL )
+  	    /* TODO: use gui_find_iconfile() */
+! 	    icon = gui_ph_toolbar_load_icon( menu->iconfile );
+  
+  	/* TODO: Restrict loading to just .png? Search for any format? */
+! 	if( ( icon == NULL ) &&
+! 	    ( ( gui_find_bitmap( menu->name, full_pathname, "gif" ) == OK ) ||
+! 	      ( gui_find_bitmap( menu->name, full_pathname, "png" ) == OK ) ) )
+! 	    icon = gui_ph_toolbar_load_icon( full_pathname );
+  
+! 	if( icon != NULL )
+  	    return icon;
+      }
+  
+!     if( menu->iconidx >= 0 &&
+! 	    ( menu->iconidx < ARRAY_LENGTH( gui_ph_toolbar_images ) ) )
+      {
+  	return gui_ph_toolbar_images[menu->iconidx];
+      }
+--- 2523,2551 ----
+   * PhImage_t are copied, and the original PhImage_t aren't needed anymore).
+   */
+  static PhImage_t *
+! gui_ph_toolbar_find_icon(vimmenu_T *menu)
+  {
+      char_u full_pathname[ MAXPATHL + 1 ];
+      PhImage_t *icon = NULL;
+  
+!     if (menu->icon_builtin == FALSE)
+      {
+! 	if (menu->iconfile != NULL)
+  	    /* TODO: use gui_find_iconfile() */
+! 	    icon = gui_ph_toolbar_load_icon(menu->iconfile);
+  
+  	/* TODO: Restrict loading to just .png? Search for any format? */
+! 	if ((icon == NULL) &&
+! 	    ((gui_find_bitmap(menu->name, full_pathname, "gif") == OK) ||
+! 	      (gui_find_bitmap(menu->name, full_pathname, "png") == OK)))
+! 	    icon = gui_ph_toolbar_load_icon(full_pathname);
+  
+! 	if (icon != NULL)
+  	    return icon;
+      }
+  
+!     if (menu->iconidx >= 0 &&
+! 	    (menu->iconidx < ARRAY_LENGTH(gui_ph_toolbar_images)))
+      {
+  	return gui_ph_toolbar_images[menu->iconidx];
+      }
+***************
+*** 2554,2567 ****
+  }
+  #endif
+  
+! #if defined( FEAT_MENU ) || defined( PROTO )
+      void
+  gui_mch_enable_menu(int flag)
+  {
+!     if( flag != 0 )
+! 	PtRealizeWidget( gui.vimMenuBar );
+      else
+! 	PtUnrealizeWidget( gui.vimMenuBar );
+  }
+  
+      void
+--- 2554,2567 ----
+  }
+  #endif
+  
+! #if defined(FEAT_MENU) || defined(PROTO)
+      void
+  gui_mch_enable_menu(int flag)
+  {
+!     if (flag != 0)
+! 	PtRealizeWidget(gui.vimMenuBar);
+      else
+! 	PtUnrealizeWidget(gui.vimMenuBar);
+  }
+  
+      void
+***************
+*** 2572,2601 ****
+  
+  /* Change the position of a menu button in the parent */
+      static void
+! gui_ph_position_menu( PtWidget_t *widget, int priority )
+  {
+      PtWidget_t	*traverse;
+      vimmenu_T	*menu;
+  
+!     traverse = PtWidgetChildBack( PtWidgetParent( widget ) );
+  
+      /* Iterate through the list of widgets in traverse, until
+       * we find the position we want to insert our widget into */
+      /* TODO: traverse from front to back, possible speedup? */
+!     while( traverse != NULL )
+      {
+! 	PtGetResource( traverse, Pt_ARG_POINTER, &menu, 0 );
+  
+! 	if( menu != NULL &&
+  		priority < menu->priority &&
+! 		widget != traverse )
+  	{
+  	    /* Insert the widget before the current traverse widget */
+! 	    PtWidgetInsert( widget, traverse, 1 );
+  	    return;
+  	}
+  
+! 	traverse = PtWidgetBrotherInFront( traverse );
+      }
+  }
+  
+--- 2572,2601 ----
+  
+  /* Change the position of a menu button in the parent */
+      static void
+! gui_ph_position_menu(PtWidget_t *widget, int priority)
+  {
+      PtWidget_t	*traverse;
+      vimmenu_T	*menu;
+  
+!     traverse = PtWidgetChildBack(PtWidgetParent(widget));
+  
+      /* Iterate through the list of widgets in traverse, until
+       * we find the position we want to insert our widget into */
+      /* TODO: traverse from front to back, possible speedup? */
+!     while (traverse != NULL)
+      {
+! 	PtGetResource(traverse, Pt_ARG_POINTER, &menu, 0);
+  
+! 	if (menu != NULL &&
+  		priority < menu->priority &&
+! 		widget != traverse)
+  	{
+  	    /* Insert the widget before the current traverse widget */
+! 	    PtWidgetInsert(widget, traverse, 1);
+  	    return;
+  	}
+  
+! 	traverse = PtWidgetBrotherInFront(traverse);
+      }
+  }
+  
+***************
+*** 2611,2621 ****
+  
+      menu->submenu_id = menu->id = NULL;
+  
+!     if( menu_is_menubar( menu->name ) )
+      {
+  
+! 	accel_key = vim_strchr( menu->name, '&' );
+! 	if( accel_key != NULL )
+  	{
+  	    mnemonic_str[0] = accel_key[1];
+  	    mnemonic_str[1] = NUL;
+--- 2611,2621 ----
+  
+      menu->submenu_id = menu->id = NULL;
+  
+!     if (menu_is_menubar(menu->name))
+      {
+  
+! 	accel_key = vim_strchr(menu->name, '&');
+! 	if (accel_key != NULL)
+  	{
+  	    mnemonic_str[0] = accel_key[1];
+  	    mnemonic_str[1] = NUL;
+***************
+*** 2623,2673 ****
+  
+  	/* Create the menu button */
+  	n = 0;
+! 	PtSetArg( &args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0 );
+! 	PtSetArg( &args[ n++ ], Pt_ARG_ACCEL_TEXT, menu->actext, 0 );
+! 	if( accel_key != NULL )
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_ACCEL_KEY, mnemonic_str, 0 );
+! 	PtSetArg( &args[ n++ ], Pt_ARG_POINTER, menu, 0 );
+  
+! 	if( parent != NULL )
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_BUTTON_TYPE, Pt_MENU_RIGHT, 0 );
+  
+! 	menu->id = PtCreateWidget( PtMenuButton,
+  		(parent == NULL) ? gui.vimMenuBar : parent->submenu_id,
+! 		n, args );
+  
+! 	PtAddCallback( menu->id, Pt_CB_ARM, gui_ph_handle_pulldown_menu, menu );
+  
+  	/* Create the actual menu */
+  	n = 0;
+! 	if( parent != NULL )
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_MENU_FLAGS, Pt_TRUE, Pt_MENU_CHILD );
+  
+! 	menu->submenu_id = PtCreateWidget( PtMenu, menu->id, n, args );
+  
+! 	if( parent == NULL )
+  	{
+! 	    PtAddCallback( menu->submenu_id, Pt_CB_UNREALIZED,
+! 		    gui_ph_handle_menu_unrealized, menu );
+  
+! 	    if( menu->mnemonic != 0 )
+  	    {
+! 		PtAddHotkeyHandler( gui.vimWindow, tolower( menu->mnemonic ),
+! 			Pk_KM_Alt, 0, menu, gui_ph_handle_pulldown_menu );
+  	    }
+  	}
+  
+! 	gui_ph_position_menu( menu->id, menu->priority );
+  
+  	/* Redraw menubar here instead of gui_mch_draw_menubar */
+! 	if( gui.menu_is_active )
+! 	    PtRealizeWidget( menu->id );
+      }
+!     else if( menu_is_popup( menu->name ) )
+      {
+! 	menu->submenu_id = PtCreateWidget( PtMenu, gui.vimWindow, 0, NULL );
+! 	PtAddCallback( menu->submenu_id, Pt_CB_UNREALIZED,
+! 		gui_ph_handle_menu_unrealized, menu );
+      }
+  }
+  
+--- 2623,2673 ----
+  
+  	/* Create the menu button */
+  	n = 0;
+! 	PtSetArg(&args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0);
+! 	PtSetArg(&args[ n++ ], Pt_ARG_ACCEL_TEXT, menu->actext, 0);
+! 	if (accel_key != NULL)
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_ACCEL_KEY, mnemonic_str, 0);
+! 	PtSetArg(&args[ n++ ], Pt_ARG_POINTER, menu, 0);
+  
+! 	if (parent != NULL)
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_BUTTON_TYPE, Pt_MENU_RIGHT, 0);
+  
+! 	menu->id = PtCreateWidget(PtMenuButton,
+  		(parent == NULL) ? gui.vimMenuBar : parent->submenu_id,
+! 		n, args);
+  
+! 	PtAddCallback(menu->id, Pt_CB_ARM, gui_ph_handle_pulldown_menu, menu);
+  
+  	/* Create the actual menu */
+  	n = 0;
+! 	if (parent != NULL)
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_MENU_FLAGS, Pt_TRUE, Pt_MENU_CHILD);
+  
+! 	menu->submenu_id = PtCreateWidget(PtMenu, menu->id, n, args);
+  
+! 	if (parent == NULL)
+  	{
+! 	    PtAddCallback(menu->submenu_id, Pt_CB_UNREALIZED,
+! 		    gui_ph_handle_menu_unrealized, menu);
+  
+! 	    if (menu->mnemonic != 0)
+  	    {
+! 		PtAddHotkeyHandler(gui.vimWindow, tolower(menu->mnemonic),
+! 			Pk_KM_Alt, 0, menu, gui_ph_handle_pulldown_menu);
+  	    }
+  	}
+  
+! 	gui_ph_position_menu(menu->id, menu->priority);
+  
+  	/* Redraw menubar here instead of gui_mch_draw_menubar */
+! 	if (gui.menu_is_active)
+! 	    PtRealizeWidget(menu->id);
+      }
+!     else if (menu_is_popup(menu->name))
+      {
+! 	menu->submenu_id = PtCreateWidget(PtMenu, gui.vimWindow, 0, NULL);
+! 	PtAddCallback(menu->submenu_id, Pt_CB_UNREALIZED,
+! 		gui_ph_handle_menu_unrealized, menu);
+      }
+  }
+  
+***************
+*** 2681,2784 ****
+      PtArg_t args[13];
+  
+      n = 0;
+!     PtSetArg( &args[ n++ ], Pt_ARG_POINTER, menu, 0 );
+  
+  #ifdef FEAT_TOOLBAR
+!     if( menu_is_toolbar( parent->name ) )
+      {
+! 	if( menu_is_separator( menu->name ) )
+  	{
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_SEP_FLAGS,
+! 		    Pt_SEP_VERTICAL, Pt_SEP_ORIENTATION );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_SEP_TYPE, Pt_ETCHED_IN, 0 );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_ANCHOR_FLAGS,
+! 		    Pt_TRUE, Pt_ANCHOR_TOP_BOTTOM );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_WIDTH, 2, 0 );
+! 	    menu->id = PtCreateWidget( PtSeparator, gui.vimToolBar, n, args );
+  	}
+  	else
+  	{
+! 	    if( strstr( (const char *) p_toolbar, "text" ) != NULL )
+  	    {
+! 		PtSetArg( &args[ n++ ], Pt_ARG_BALLOON_POSITION,
+! 			Pt_BALLOON_BOTTOM, 0 );
+! 		PtSetArg( &args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0 );
+! 		PtSetArg( &args[ n++ ], Pt_ARG_TEXT_FONT, "TextFont08", 0 );
+  	    }
+! 	    if( ( strstr( (const char *) p_toolbar, "icons" ) != NULL ) &&
+! 		    ( gui_ph_toolbar_images != NULL ) )
+  	    {
+! 		PtSetArg( &args[ n++ ], Pt_ARG_LABEL_IMAGE,
+! 			gui_ph_toolbar_find_icon( menu ), 0 );
+! 		PtSetArg( &args[ n++ ], Pt_ARG_LABEL_TYPE, Pt_TEXT_IMAGE, 0 );
+! 		PtSetArg( &args[ n++ ], Pt_ARG_TEXT_IMAGE_SPACING, 0, 0 );
+  	    }
+! 	    if( strstr( (const char *) p_toolbar, "tooltips" ) != NULL )
+  	    {
+! 		PtSetArg( &args[ n++ ], Pt_ARG_LABEL_BALLOON,
+! 			gui_ph_show_tooltip, 0 );
+! 		PtSetArg( &args[ n++ ], Pt_ARG_LABEL_FLAGS,
+! 			Pt_TRUE, Pt_SHOW_BALLOON );
+  	    }
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_MARGIN_HEIGHT, 1, 0 );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_MARGIN_WIDTH, 1, 0 );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_FLAGS, Pt_FALSE,
+! 		    Pt_HIGHLIGHTED | Pt_GETS_FOCUS );
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_FILL_COLOR, Pg_TRANSPARENT, 0 );
+! 	    menu->id = PtCreateWidget( PtButton, gui.vimToolBar, n, args );
+  
+! 	    PtAddCallback( menu->id, Pt_CB_ACTIVATE, gui_ph_handle_menu, menu );
+  	}
+  	/* Update toolbar if it's open */
+! 	if( PtWidgetIsRealized( gui.vimToolBar ) )
+! 	    PtRealizeWidget( menu->id );
+      }
+      else
+  #endif
+! 	if( menu_is_separator( menu->name ) )
+      {
+! 	menu->id = PtCreateWidget( PtSeparator, parent->submenu_id, n, args );
+      }
+      else
+      {
+! 	accel_key = vim_strchr( menu->name, '&' );
+! 	if( accel_key != NULL )
+  	{
+  	    mnemonic_str[0] = accel_key[1];
+  	    mnemonic_str[1] = NUL;
+  	}
+  
+! 	PtSetArg( &args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0 );
+! 	if( accel_key != NULL )
+! 	    PtSetArg( &args[ n++ ], Pt_ARG_ACCEL_KEY, mnemonic_str,
+! 		    0 );
+  
+! 	PtSetArg( &args[ n++ ], Pt_ARG_ACCEL_TEXT, menu->actext, 0 );
+  
+! 	menu->id = PtCreateWidget( PtMenuButton, parent->submenu_id, n, args );
+  
+! 	PtAddCallback( menu->id, Pt_CB_ACTIVATE, gui_ph_handle_menu, menu );
+  
+  #ifdef USE_PANEL_GROUP
+! 	if( gui_ph_is_buffer_item( menu, parent ) == TRUE )
+  	{
+! 	    PtAddCallback( menu->id, Pt_CB_DESTROYED,
+! 		    gui_ph_handle_buffer_remove, menu );
+! 	    gui_ph_pg_add_buffer( menu->dname );
+  	}
+  #endif
+      }
+  
+!     gui_ph_position_menu( menu->id, menu->priority );
+  }
+  
+      void
+  gui_mch_destroy_menu(vimmenu_T *menu)
+  {
+!     if( menu->submenu_id != NULL )
+! 	PtDestroyWidget( menu->submenu_id );
+!     if( menu->id != NULL )
+! 	PtDestroyWidget( menu->id );
+  
+      menu->submenu_id = NULL;
+      menu->id = NULL;
+--- 2681,2784 ----
+      PtArg_t args[13];
+  
+      n = 0;
+!     PtSetArg(&args[ n++ ], Pt_ARG_POINTER, menu, 0);
+  
+  #ifdef FEAT_TOOLBAR
+!     if (menu_is_toolbar(parent->name))
+      {
+! 	if (menu_is_separator(menu->name))
+  	{
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_SEP_FLAGS,
+! 		    Pt_SEP_VERTICAL, Pt_SEP_ORIENTATION);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_SEP_TYPE, Pt_ETCHED_IN, 0);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_ANCHOR_FLAGS,
+! 		    Pt_TRUE, Pt_ANCHOR_TOP_BOTTOM);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_WIDTH, 2, 0);
+! 	    menu->id = PtCreateWidget(PtSeparator, gui.vimToolBar, n, args);
+  	}
+  	else
+  	{
+! 	    if (strstr((const char *) p_toolbar, "text") != NULL)
+  	    {
+! 		PtSetArg(&args[ n++ ], Pt_ARG_BALLOON_POSITION,
+! 			Pt_BALLOON_BOTTOM, 0);
+! 		PtSetArg(&args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0);
+! 		PtSetArg(&args[ n++ ], Pt_ARG_TEXT_FONT, "TextFont08", 0);
+  	    }
+! 	    if ((strstr((const char *) p_toolbar, "icons") != NULL) &&
+! 		    (gui_ph_toolbar_images != NULL))
+  	    {
+! 		PtSetArg(&args[ n++ ], Pt_ARG_LABEL_IMAGE,
+! 			gui_ph_toolbar_find_icon(menu), 0);
+! 		PtSetArg(&args[ n++ ], Pt_ARG_LABEL_TYPE, Pt_TEXT_IMAGE, 0);
+! 		PtSetArg(&args[ n++ ], Pt_ARG_TEXT_IMAGE_SPACING, 0, 0);
+  	    }
+! 	    if (strstr((const char *) p_toolbar, "tooltips") != NULL)
+  	    {
+! 		PtSetArg(&args[ n++ ], Pt_ARG_LABEL_BALLOON,
+! 			gui_ph_show_tooltip, 0);
+! 		PtSetArg(&args[ n++ ], Pt_ARG_LABEL_FLAGS,
+! 			Pt_TRUE, Pt_SHOW_BALLOON);
+  	    }
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_MARGIN_HEIGHT, 1, 0);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_MARGIN_WIDTH, 1, 0);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_FLAGS, Pt_FALSE,
+! 		    Pt_HIGHLIGHTED | Pt_GETS_FOCUS);
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_FILL_COLOR, Pg_TRANSPARENT, 0);
+! 	    menu->id = PtCreateWidget(PtButton, gui.vimToolBar, n, args);
+  
+! 	    PtAddCallback(menu->id, Pt_CB_ACTIVATE, gui_ph_handle_menu, menu);
+  	}
+  	/* Update toolbar if it's open */
+! 	if (PtWidgetIsRealized(gui.vimToolBar))
+! 	    PtRealizeWidget(menu->id);
+      }
+      else
+  #endif
+! 	if (menu_is_separator(menu->name))
+      {
+! 	menu->id = PtCreateWidget(PtSeparator, parent->submenu_id, n, args);
+      }
+      else
+      {
+! 	accel_key = vim_strchr(menu->name, '&');
+! 	if (accel_key != NULL)
+  	{
+  	    mnemonic_str[0] = accel_key[1];
+  	    mnemonic_str[1] = NUL;
+  	}
+  
+! 	PtSetArg(&args[ n++ ], Pt_ARG_TEXT_STRING, menu->dname, 0);
+! 	if (accel_key != NULL)
+! 	    PtSetArg(&args[ n++ ], Pt_ARG_ACCEL_KEY, mnemonic_str,
+! 		    0);
+  
+! 	PtSetArg(&args[ n++ ], Pt_ARG_ACCEL_TEXT, menu->actext, 0);
+  
+! 	menu->id = PtCreateWidget(PtMenuButton, parent->submenu_id, n, args);
+  
+! 	PtAddCallback(menu->id, Pt_CB_ACTIVATE, gui_ph_handle_menu, menu);
+  
+  #ifdef USE_PANEL_GROUP
+! 	if (gui_ph_is_buffer_item(menu, parent) == TRUE)
+  	{
+! 	    PtAddCallback(menu->id, Pt_CB_DESTROYED,
+! 		    gui_ph_handle_buffer_remove, menu);
+! 	    gui_ph_pg_add_buffer(menu->dname);
+  	}
+  #endif
+      }
+  
+!     gui_ph_position_menu(menu->id, menu->priority);
+  }
+  
+      void
+  gui_mch_destroy_menu(vimmenu_T *menu)
+  {
+!     if (menu->submenu_id != NULL)
+! 	PtDestroyWidget(menu->submenu_id);
+!     if (menu->id != NULL)
+! 	PtDestroyWidget(menu->id);
+  
+      menu->submenu_id = NULL;
+      menu->id = NULL;
+***************
+*** 2789,2800 ****
+  {
+      long    flags, mask, fields;
+  
+!     if( menu->id == NULL )
+  	return;
+  
+!     flags = PtWidgetFlags( menu->id );
+!     if( PtWidgetIsClass( menu->id, PtMenuButton ) &&
+! 	    PtWidgetIsClass( PtWidgetParent( menu->id ), PtMenu ) )
+      {
+  	fields = Pt_FALSE;
+  	mask = Pt_SELECTABLE | Pt_HIGHLIGHTED;
+--- 2789,2800 ----
+  {
+      long    flags, mask, fields;
+  
+!     if (menu->id == NULL)
+  	return;
+  
+!     flags = PtWidgetFlags(menu->id);
+!     if (PtWidgetIsClass(menu->id, PtMenuButton) &&
+! 	    PtWidgetIsClass(PtWidgetParent(menu->id), PtMenu))
+      {
+  	fields = Pt_FALSE;
+  	mask = Pt_SELECTABLE | Pt_HIGHLIGHTED;
+***************
+*** 2805,2815 ****
+  	mask = Pt_BLOCKED | Pt_GHOST;
+      }
+  
+!     if( ! grey )
+  	fields = ~fields;
+  
+!     PtSetResource( menu->id, Pt_ARG_FLAGS, fields,
+! 	    mask );
+  }
+  
+      void
+--- 2805,2815 ----
+  	mask = Pt_BLOCKED | Pt_GHOST;
+      }
+  
+!     if (! grey)
+  	fields = ~fields;
+  
+!     PtSetResource(menu->id, Pt_ARG_FLAGS, fields,
+! 	    mask);
+  }
+  
+      void
+***************
+*** 2830,2837 ****
+      void
+  gui_mch_show_popupmenu(vimmenu_T *menu)
+  {
+!     PtSetResource( menu->submenu_id, Pt_ARG_POS, &abs_mouse, 0 );
+!     PtRealizeWidget( menu->submenu_id );
+  }
+  
+      void
+--- 2830,2837 ----
+      void
+  gui_mch_show_popupmenu(vimmenu_T *menu)
+  {
+!     PtSetResource(menu->submenu_id, Pt_ARG_POS, &abs_mouse, 0);
+!     PtRealizeWidget(menu->submenu_id);
+  }
+  
+      void
+***************
+*** 2842,2855 ****
+  
+  #endif
+  
+! #if defined( FEAT_TOOLBAR ) || defined( PROTO )
+      void
+  gui_mch_show_toolbar(int showit)
+  {
+!     if( showit )
+! 	PtRealizeWidget( gui.vimToolBar );
+      else
+! 	PtUnrealizeWidget( gui.vimToolBar );
+  }
+  #endif
+  
+--- 2842,2855 ----
+  
+  #endif
+  
+! #if defined(FEAT_TOOLBAR) || defined(PROTO)
+      void
+  gui_mch_show_toolbar(int showit)
+  {
+!     if (showit)
+! 	PtRealizeWidget(gui.vimToolBar);
+      else
+! 	PtUnrealizeWidget(gui.vimToolBar);
+  }
+  #endif
+  
+***************
+*** 2870,2903 ****
+      FontQueryInfo   info;
+      int_u	    style;
+  
+!     font_tag = alloc( MAX_FONT_TAG );
+!     if( font_tag != NULL )
+      {
+! 	if( PfGenerateFontName( font_name, font_flags, font_size,
+! 		    font_tag ) != NULL )
+  	{
+  	    /* Enforce some limits on the font used */
+  	    style = PHFONT_INFO_FIXED;
+  
+! 	    if( enforce & PF_STYLE_BOLD )
+  		style |= PHFONT_INFO_BOLD;
+! 	    if( enforce & PF_STYLE_ANTIALIAS )
+  		style |= PHFONT_INFO_ALIAS;
+! 	    if( enforce & PF_STYLE_ITALIC )
+  		style |= PHFONT_INFO_ITALIC;
+  
+! 	    PfQueryFontInfo( font_tag, &info );
+  
+! 	    if( info.size == 0 )
+  		font_size = 0;
+  
+  	    /* Make sure font size matches, and that the font style
+  	     * at least has the bits we're checking for */
+! 	    if( font_size == info.size &&
+! 		    style == (info.style & style) )
+  		return (GuiFont)font_tag;
+  	}
+! 	vim_free( font_tag );
+      }
+      return NULL;
+  }
+--- 2870,2903 ----
+      FontQueryInfo   info;
+      int_u	    style;
+  
+!     font_tag = alloc(MAX_FONT_TAG);
+!     if (font_tag != NULL)
+      {
+! 	if (PfGenerateFontName(font_name, font_flags, font_size,
+! 		    font_tag) != NULL)
+  	{
+  	    /* Enforce some limits on the font used */
+  	    style = PHFONT_INFO_FIXED;
+  
+! 	    if (enforce & PF_STYLE_BOLD)
+  		style |= PHFONT_INFO_BOLD;
+! 	    if (enforce & PF_STYLE_ANTIALIAS)
+  		style |= PHFONT_INFO_ALIAS;
+! 	    if (enforce & PF_STYLE_ITALIC)
+  		style |= PHFONT_INFO_ITALIC;
+  
+! 	    PfQueryFontInfo(font_tag, &info);
+  
+! 	    if (info.size == 0)
+  		font_size = 0;
+  
+  	    /* Make sure font size matches, and that the font style
+  	     * at least has the bits we're checking for */
+! 	    if (font_size == info.size &&
+! 		    style == (info.style & style))
+  		return (GuiFont)font_tag;
+  	}
+! 	vim_free(font_tag);
+      }
+      return NULL;
+  }
+***************
+*** 2919,2936 ****
+  	char_u *vim_font,
+  	char_u **font_name,
+  	int_u *font_flags,
+! 	int_u *font_size )
+  {
+      char_u  *mark;
+      int_u   name_len, size;
+  
+!     mark = vim_strchr( vim_font, ':' );
+!     if( mark == NULL )
+! 	name_len = STRLEN( vim_font );
+      else
+! 	name_len = (int_u) ( mark - vim_font );
+  
+!     *font_name = vim_strnsave( vim_font, name_len );
+      if (*font_name != NULL)
+      {
+  	if (mark != NULL)
+--- 2919,2936 ----
+  	char_u *vim_font,
+  	char_u **font_name,
+  	int_u *font_flags,
+! 	int_u *font_size)
+  {
+      char_u  *mark;
+      int_u   name_len, size;
+  
+!     mark = vim_strchr(vim_font, ':');
+!     if (mark == NULL)
+! 	name_len = STRLEN(vim_font);
+      else
+! 	name_len = (int_u) (mark - vim_font);
+  
+!     *font_name = vim_strnsave(vim_font, name_len);
+      if (*font_name != NULL)
+      {
+  	if (mark != NULL)
+***************
+*** 2944,2950 ****
+  		    case 'i': *font_flags |= PF_STYLE_ITALIC; break;
+  
+  		    case 's':
+! 			size = getdigits( &mark );
+  			/* Restrict the size to some vague limits */
+  			if (size < 1 || size > 100)
+  			    size = 8;
+--- 2944,2950 ----
+  		    case 'i': *font_flags |= PF_STYLE_ITALIC; break;
+  
+  		    case 's':
+! 			size = getdigits(&mark);
+  			/* Restrict the size to some vague limits */
+  			if (size < 1 || size > 100)
+  			    size = 8;
+***************
+*** 2979,3031 ****
+  	vim_font_name = "PC Terminal";
+      }
+  
+!     if (STRCMP( vim_font_name, "*" ) == 0)
+      {
+! 	font_tag = PtFontSelection( gui.vimWindow, NULL, NULL,
+! 		"pcterm12", -1, PHFONT_FIXED, NULL );
+  
+  	if (font_tag == NULL)
+  	    return FAIL;
+  
+! 	gui_mch_free_font( gui.norm_font );
+  	gui.norm_font = font_tag;
+  
+! 	PfQueryFontInfo( font_tag, &info );
+! 	font_name = vim_strsave( info.font );
+      }
+      else
+      {
+! 	if (gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		    &font_size ) == FALSE)
+  	    return FAIL;
+  
+! 	font_tag = gui_ph_get_font( font_name, font_flags, font_size, 0 );
+  	if (font_tag == NULL)
+  	{
+! 	    vim_free( font_name );
+  	    return FAIL;
+  	}
+  
+! 	gui_mch_free_font( gui.norm_font );
+  	gui.norm_font = font_tag;
+      }
+  
+!     gui_mch_free_font( gui.bold_font );
+!     gui.bold_font = gui_ph_get_font( font_name, font_flags | PF_STYLE_BOLD,
+! 	    font_size, PF_STYLE_BOLD );
+! 
+!     gui_mch_free_font( gui.ital_font );
+!     gui.ital_font = gui_ph_get_font( font_name, font_flags | PF_STYLE_ITALIC,
+! 	    font_size, PF_STYLE_ITALIC );
+  
+      /* This extent was brought to you by the letter 'g' */
+!     PfExtentText( &extent, NULL, font_tag, "g", 1 );
+  
+      gui.char_width = extent.lr.x - extent.ul.x + 1;
+      gui.char_height = (- extent.ul.y) + extent.lr.y + 1;
+      gui.char_ascent = - extent.ul.y;
+  
+!     vim_free( font_name );
+      return OK;
+  }
+  
+--- 2979,3031 ----
+  	vim_font_name = "PC Terminal";
+      }
+  
+!     if (STRCMP(vim_font_name, "*") == 0)
+      {
+! 	font_tag = PtFontSelection(gui.vimWindow, NULL, NULL,
+! 		"pcterm12", -1, PHFONT_FIXED, NULL);
+  
+  	if (font_tag == NULL)
+  	    return FAIL;
+  
+! 	gui_mch_free_font(gui.norm_font);
+  	gui.norm_font = font_tag;
+  
+! 	PfQueryFontInfo(font_tag, &info);
+! 	font_name = vim_strsave(info.font);
+      }
+      else
+      {
+! 	if (gui_ph_parse_font_name(vim_font_name, &font_name, &font_flags,
+! 		    &font_size) == FALSE)
+  	    return FAIL;
+  
+! 	font_tag = gui_ph_get_font(font_name, font_flags, font_size, 0);
+  	if (font_tag == NULL)
+  	{
+! 	    vim_free(font_name);
+  	    return FAIL;
+  	}
+  
+! 	gui_mch_free_font(gui.norm_font);
+  	gui.norm_font = font_tag;
+      }
+  
+!     gui_mch_free_font(gui.bold_font);
+!     gui.bold_font = gui_ph_get_font(font_name, font_flags | PF_STYLE_BOLD,
+! 	    font_size, PF_STYLE_BOLD);
+! 
+!     gui_mch_free_font(gui.ital_font);
+!     gui.ital_font = gui_ph_get_font(font_name, font_flags | PF_STYLE_ITALIC,
+! 	    font_size, PF_STYLE_ITALIC);
+  
+      /* This extent was brought to you by the letter 'g' */
+!     PfExtentText(&extent, NULL, font_tag, "g", 1);
+  
+      gui.char_width = extent.lr.x - extent.ul.x + 1;
+      gui.char_height = (- extent.ul.y) + extent.lr.y + 1;
+      gui.char_ascent = - extent.ul.y;
+  
+!     vim_free(font_name);
+      return OK;
+  }
+  
+***************
+*** 3037,3043 ****
+  {
+      FontQueryInfo info;
+  
+!     PfQueryFontInfo( gui.norm_font, &info );
+  
+      gui.char_height = - info.ascender + info.descender + p_linespace;
+      gui.char_ascent = - info.ascender + p_linespace / 2;
+--- 3037,3043 ----
+  {
+      FontQueryInfo info;
+  
+!     PfQueryFontInfo(gui.norm_font, &info);
+  
+      gui.char_height = - info.ascender + info.descender + p_linespace;
+      gui.char_ascent = - info.ascender + p_linespace / 2;
+***************
+*** 3053,3070 ****
+      int_u   font_size = 12;
+      int_u   font_flags = 0;
+  
+!     if (gui_ph_parse_font_name( vim_font_name, &font_name, &font_flags,
+! 		&font_size ) != FALSE)
+      {
+! 	font_tag = gui_ph_get_font( font_name, font_flags, font_size, -1 );
+! 	vim_free( font_name );
+  
+  	if (font_tag != NULL)
+  	    return (GuiFont)font_tag;
+      }
+  
+      if (report_error)
+! 	EMSG2(e_font, vim_font_name );
+  
+      return FAIL;
+  }
+--- 3053,3070 ----
+      int_u   font_size = 12;
+      int_u   font_flags = 0;
+  
+!     if (gui_ph_parse_font_name(vim_font_name, &font_name, &font_flags,
+! 		&font_size) != FALSE)
+      {
+! 	font_tag = gui_ph_get_font(font_name, font_flags, font_size, -1);
+! 	vim_free(font_name);
+  
+  	if (font_tag != NULL)
+  	    return (GuiFont)font_tag;
+      }
+  
+      if (report_error)
+! 	EMSG2(e_font, vim_font_name);
+  
+      return FAIL;
+  }
+***************
+*** 3088,3099 ****
+      void
+  gui_mch_set_font(GuiFont font)
+  {
+!     PgSetFont( font );
+  }
+  
+      void
+  gui_mch_free_font(GuiFont font)
+  {
+!     vim_free( font );
+  }
+  
+--- 3088,3099 ----
+      void
+  gui_mch_set_font(GuiFont font)
+  {
+!     PgSetFont(font);
+  }
+  
+      void
+  gui_mch_free_font(GuiFont font)
+  {
+!     vim_free(font);
+  }
+  
+*** ../vim-7.3.309/src/version.c	2011-09-14 15:41:54.000000000 +0200
+--- src/version.c	2011-09-14 16:01:50.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     310,
+  /**/
+
+-- 
+An operatingsystem is just a name you give to the rest of bloating
+idiosyncratic machine-based-features you left out of your editor.
+			(author unknown)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.311 b/source/ap/vim/patches/7.3.311
new file mode 100644
index 00000000..13aec74a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.311
@@ -0,0 +1,351 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.311
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.311 (replaces 7.3.289)
+Problem:    Complete function isn't called when the leader changed.
+Solution:   Allow the complete function to return a dictionary with a flag
+	    that indicates ins_compl_restart() is to be called when the leader
+	    changes. (Taro Muraoka)
+Files:	    runtime/insert.txt, src/edit.c, src/eval.c, src/proto/eval.pro
+
+
+*** ../vim-7.3.310/src/edit.c	2011-09-05 20:13:37.000000000 +0200
+--- src/edit.c	2011-09-14 16:43:14.000000000 +0200
+***************
+*** 135,140 ****
+--- 135,142 ----
+  static int	  compl_cont_mode = 0;
+  static expand_T	  compl_xp;
+  
++ static int	  compl_opt_refresh_always = FALSE;
++ 
+  static void ins_ctrl_x __ARGS((void));
+  static int  has_compl_option __ARGS((int dict_opt));
+  static int  ins_compl_accept_char __ARGS((int c));
+***************
+*** 153,161 ****
+  static void ins_compl_free __ARGS((void));
+  static void ins_compl_clear __ARGS((void));
+  static int  ins_compl_bs __ARGS((void));
+  static void ins_compl_new_leader __ARGS((void));
+  static void ins_compl_addleader __ARGS((int c));
+! static int ins_compl_len __ARGS((void));
+  static void ins_compl_restart __ARGS((void));
+  static void ins_compl_set_original_text __ARGS((char_u *str));
+  static void ins_compl_addfrommatch __ARGS((void));
+--- 155,164 ----
+  static void ins_compl_free __ARGS((void));
+  static void ins_compl_clear __ARGS((void));
+  static int  ins_compl_bs __ARGS((void));
++ static int  ins_compl_need_restart __ARGS((void));
+  static void ins_compl_new_leader __ARGS((void));
+  static void ins_compl_addleader __ARGS((int c));
+! static int  ins_compl_len __ARGS((void));
+  static void ins_compl_restart __ARGS((void));
+  static void ins_compl_set_original_text __ARGS((char_u *str));
+  static void ins_compl_addfrommatch __ARGS((void));
+***************
+*** 163,168 ****
+--- 166,172 ----
+  static buf_T *ins_compl_next_buf __ARGS((buf_T *buf, int flag));
+  #if defined(FEAT_COMPL_FUNC) || defined(FEAT_EVAL)
+  static void ins_compl_add_list __ARGS((list_T *list));
++ static void ins_compl_add_dict __ARGS((dict_T *dict));
+  #endif
+  static int  ins_compl_get_exp __ARGS((pos_T *ini));
+  static void ins_compl_delete __ARGS((void));
+***************
+*** 3341,3347 ****
+      /* Deleted more than what was used to find matches or didn't finish
+       * finding all matches: need to look for matches all over again. */
+      if (curwin->w_cursor.col <= compl_col + compl_length
+! 						     || compl_was_interrupted)
+  	ins_compl_restart();
+  
+      vim_free(compl_leader);
+--- 3345,3351 ----
+      /* Deleted more than what was used to find matches or didn't finish
+       * finding all matches: need to look for matches all over again. */
+      if (curwin->w_cursor.col <= compl_col + compl_length
+! 						  || ins_compl_need_restart())
+  	ins_compl_restart();
+  
+      vim_free(compl_leader);
+***************
+*** 3355,3360 ****
+--- 3359,3378 ----
+  }
+  
+  /*
++  * Return TRUE when we need to find matches again, ins_compl_restart() is to
++  * be called.
++  */
++     static int
++ ins_compl_need_restart()
++ {
++     /* Return TRUE if we didn't complete finding matches or when the
++      * 'completefunc' returned "always" in the "refresh" dictionary item. */
++     return compl_was_interrupted
++ 	|| ((ctrl_x_mode == CTRL_X_FUNCTION || ctrl_x_mode == CTRL_X_OMNI)
++ 						  && compl_opt_refresh_always);
++ }
++ 
++ /*
+   * Called after changing "compl_leader".
+   * Show the popup menu with a different set of matches.
+   * May also search for matches again if the previous search was interrupted.
+***************
+*** 3443,3449 ****
+  	ins_char(c);
+  
+      /* If we didn't complete finding matches we must search again. */
+!     if (compl_was_interrupted)
+  	ins_compl_restart();
+  
+      vim_free(compl_leader);
+--- 3461,3467 ----
+  	ins_char(c);
+  
+      /* If we didn't complete finding matches we must search again. */
+!     if (ins_compl_need_restart())
+  	ins_compl_restart();
+  
+      vim_free(compl_leader);
+***************
+*** 3871,3882 ****
+      int		type;	    /* CTRL_X_OMNI or CTRL_X_FUNCTION */
+      char_u	*base;
+  {
+!     list_T      *matchlist;
+      char_u	*args[2];
+      char_u	*funcname;
+      pos_T	pos;
+      win_T	*curwin_save;
+      buf_T	*curbuf_save;
+  
+      funcname = (type == CTRL_X_FUNCTION) ? curbuf->b_p_cfu : curbuf->b_p_ofu;
+      if (*funcname == NUL)
+--- 3889,3902 ----
+      int		type;	    /* CTRL_X_OMNI or CTRL_X_FUNCTION */
+      char_u	*base;
+  {
+!     list_T      *matchlist = NULL;
+!     dict_T	*matchdict = NULL;
+      char_u	*args[2];
+      char_u	*funcname;
+      pos_T	pos;
+      win_T	*curwin_save;
+      buf_T	*curbuf_save;
++     typval_T	rettv;
+  
+      funcname = (type == CTRL_X_FUNCTION) ? curbuf->b_p_cfu : curbuf->b_p_ofu;
+      if (*funcname == NUL)
+***************
+*** 3889,3895 ****
+      pos = curwin->w_cursor;
+      curwin_save = curwin;
+      curbuf_save = curbuf;
+!     matchlist = call_func_retlist(funcname, 2, args, FALSE);
+      if (curwin_save != curwin || curbuf_save != curbuf)
+      {
+  	EMSG(_(e_complwin));
+--- 3909,3933 ----
+      pos = curwin->w_cursor;
+      curwin_save = curwin;
+      curbuf_save = curbuf;
+! 
+!     /* Call a function, which returns a list or dict. */
+!     if (call_vim_function(funcname, 2, args, FALSE, &rettv) == OK)
+!     {
+! 	switch (rettv.v_type)
+! 	{
+! 	    case VAR_LIST:
+! 		matchlist = rettv.vval.v_list;
+! 		break;
+! 	    case VAR_DICT:
+! 		matchdict = rettv.vval.v_dict;
+! 		break;
+! 	    default:
+! 		/* TODO: Give error message? */
+! 		clear_tv(&rettv);
+! 		break;
+! 	}
+!     }
+! 
+      if (curwin_save != curwin || curbuf_save != curbuf)
+      {
+  	EMSG(_(e_complwin));
+***************
+*** 3902,3911 ****
+--- 3940,3954 ----
+  	EMSG(_(e_compldel));
+  	goto theend;
+      }
++ 
+      if (matchlist != NULL)
+  	ins_compl_add_list(matchlist);
++     else if (matchdict != NULL)
++ 	ins_compl_add_dict(matchdict);
+  
+  theend:
++     if (matchdict != NULL)
++ 	dict_unref(matchdict);
+      if (matchlist != NULL)
+  	list_unref(matchlist);
+  }
+***************
+*** 3934,3939 ****
+--- 3977,4009 ----
+  }
+  
+  /*
++  * Add completions from a dict.
++  */
++     static void
++ ins_compl_add_dict(dict)
++     dict_T	*dict;
++ {
++     dictitem_T	*refresh;
++     dictitem_T	*words;
++ 
++     /* Check for optional "refresh" item. */
++     compl_opt_refresh_always = FALSE;
++     refresh = dict_find(dict, (char_u *)"refresh", 7);
++     if (refresh != NULL && refresh->di_tv.v_type == VAR_STRING)
++     {
++ 	char_u	*v = refresh->di_tv.vval.v_string;
++ 
++ 	if (v != NULL && STRCMP(v, (char_u *)"always") == 0)
++ 	    compl_opt_refresh_always = TRUE;
++     }
++ 
++     /* Add completions from a "words" list. */
++     words = dict_find(dict, (char_u *)"words", 5);
++     if (words != NULL && words->di_tv.v_type == VAR_LIST)
++ 	ins_compl_add_list(words->di_tv.vval.v_list);
++ }
++ 
++ /*
+   * Add a match to the list of matches from a typeval_T.
+   * If the given string is already in the list of completions, then return
+   * NOTDONE, otherwise add it to the list and return OK.  If there is an error,
+***************
+*** 5088,5093 ****
+--- 5158,5169 ----
+  		return FAIL;
+  	    }
+  
++ 	    /*
++ 	     * Reset extended parameters of completion, when start new
++ 	     * completion.
++ 	     */
++ 	    compl_opt_refresh_always = FALSE;
++ 
+  	    if (col < 0)
+  		col = curs_col;
+  	    compl_col = col;
+*** ../vim-7.3.310/src/eval.c	2011-09-14 14:33:47.000000000 +0200
+--- src/eval.c	2011-09-14 16:16:47.000000000 +0200
+***************
+*** 380,388 ****
+  
+  static void prepare_vimvar __ARGS((int idx, typval_T *save_tv));
+  static void restore_vimvar __ARGS((int idx, typval_T *save_tv));
+- #if defined(FEAT_USR_CMDS) && defined(FEAT_CMDL_COMPL)
+- static int call_vim_function __ARGS((char_u *func, int argc, char_u **argv, int safe, typval_T *rettv));
+- #endif
+  static int ex_let_vars __ARGS((char_u *arg, typval_T *tv, int copy, int semicolon, int var_count, char_u *nextchars));
+  static char_u *skip_var_list __ARGS((char_u *arg, int *var_count, int *semicolon));
+  static char_u *skip_var_one __ARGS((char_u *arg));
+--- 380,385 ----
+***************
+*** 451,457 ****
+  static void set_ref_in_list __ARGS((list_T *l, int copyID));
+  static void set_ref_in_item __ARGS((typval_T *tv, int copyID));
+  static int rettv_dict_alloc __ARGS((typval_T *rettv));
+- static void dict_unref __ARGS((dict_T *d));
+  static void dict_free __ARGS((dict_T *d, int recurse));
+  static dictitem_T *dictitem_copy __ARGS((dictitem_T *org));
+  static void dictitem_remove __ARGS((dict_T *dict, dictitem_T *item));
+--- 448,453 ----
+***************
+*** 1563,1569 ****
+   * arguments are currently supported.
+   * Returns OK or FAIL.
+   */
+!     static int
+  call_vim_function(func, argc, argv, safe, rettv)
+      char_u      *func;
+      int		argc;
+--- 1559,1565 ----
+   * arguments are currently supported.
+   * Returns OK or FAIL.
+   */
+!     int
+  call_vim_function(func, argc, argv, safe, rettv)
+      char_u      *func;
+      int		argc;
+***************
+*** 6903,6909 ****
+   * Unreference a Dictionary: decrement the reference count and free it when it
+   * becomes zero.
+   */
+!     static void
+  dict_unref(d)
+      dict_T *d;
+  {
+--- 6899,6905 ----
+   * Unreference a Dictionary: decrement the reference count and free it when it
+   * becomes zero.
+   */
+!     void
+  dict_unref(d)
+      dict_T *d;
+  {
+*** ../vim-7.3.310/src/proto/eval.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/eval.pro	2011-09-14 16:16:47.000000000 +0200
+***************
+*** 23,28 ****
+--- 23,29 ----
+  list_T *eval_spell_expr __ARGS((char_u *badword, char_u *expr));
+  int get_spellword __ARGS((list_T *list, char_u **pp));
+  typval_T *eval_expr __ARGS((char_u *arg, char_u **nextcmd));
++ int call_vim_function __ARGS((char_u *func, int argc, char_u **argv, int safe, typval_T *rettv));
+  void *call_func_retstr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  long call_func_retnr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  void *call_func_retlist __ARGS((char_u *func, int argc, char_u **argv, int safe));
+***************
+*** 52,57 ****
+--- 53,59 ----
+  int list_append_string __ARGS((list_T *l, char_u *str, int len));
+  int garbage_collect __ARGS((void));
+  dict_T *dict_alloc __ARGS((void));
++ void dict_unref __ARGS((dict_T *d));
+  dictitem_T *dictitem_alloc __ARGS((char_u *key));
+  void dictitem_free __ARGS((dictitem_T *item));
+  int dict_add __ARGS((dict_T *d, dictitem_T *item));
+*** ../vim-7.3.310/src/version.c	2011-09-14 16:04:52.000000000 +0200
+--- src/version.c	2011-09-14 16:25:08.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     311,
+  /**/
+
+-- 
+Contrary to popular belief, it's often your clothing that gets promoted, not
+you.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.312 b/source/ap/vim/patches/7.3.312
new file mode 100644
index 00000000..d2480e09
--- /dev/null
+++ b/source/ap/vim/patches/7.3.312
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.312
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.312 (after 7.3.306)
+Problem:    Can't compile with tiny features.
+Solution:   Add #ifdef around win_valid().
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.311/src/buffer.c	2011-09-14 14:43:21.000000000 +0200
+--- src/buffer.c	2011-09-14 17:46:24.000000000 +0200
+***************
+*** 416,422 ****
+  #endif
+  
+      buf_freeall(buf, (del_buf ? BFA_DEL : 0) + (wipe_buf ? BFA_WIPE : 0));
+!     if (win_valid(win) && win->w_buffer == buf)
+  	win->w_buffer = NULL;  /* make sure we don't use the buffer now */
+  
+  #ifdef FEAT_AUTOCMD
+--- 416,426 ----
+  #endif
+  
+      buf_freeall(buf, (del_buf ? BFA_DEL : 0) + (wipe_buf ? BFA_WIPE : 0));
+!     if (
+! #ifdef FEAT_WINDOWS
+! 	win_valid(win) &&
+! #endif
+! 			  win->w_buffer == buf)
+  	win->w_buffer = NULL;  /* make sure we don't use the buffer now */
+  
+  #ifdef FEAT_AUTOCMD
+*** ../vim-7.3.311/src/version.c	2011-09-14 16:52:02.000000000 +0200
+--- src/version.c	2011-09-14 17:27:24.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     312,
+  /**/
+
+-- 
+You have heard the saying that if you put a thousand monkeys in a room with a
+thousand typewriters and waited long enough, eventually you would have a room
+full of dead monkeys.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.313 b/source/ap/vim/patches/7.3.313
new file mode 100644
index 00000000..ca818b8b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.313
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.313
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.313 (after 7.3.307)
+Problem:    One more warning when compiling with dynamic Python 3.
+Solution:   Change PySliceObject to PyObject.
+Files:      src/if_python3.c
+
+
+*** ../vim-7.3.312/src/if_python3.c	2011-09-14 15:41:54.000000000 +0200
+--- src/if_python3.c	2011-09-14 18:54:49.000000000 +0200
+***************
+*** 194,200 ****
+  static int (*py3_PySys_SetObject)(char *, PyObject *);
+  static PyObject* (*py3_PyList_Append)(PyObject *, PyObject *);
+  static Py_ssize_t (*py3_PyList_Size)(PyObject *);
+! static int (*py3_PySlice_GetIndicesEx)(PySliceObject *r, Py_ssize_t length,
+  		     Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength);
+  static PyObject* (*py3_PyErr_NoMemory)(void);
+  static void (*py3_Py_Finalize)(void);
+--- 194,200 ----
+  static int (*py3_PySys_SetObject)(char *, PyObject *);
+  static PyObject* (*py3_PyList_Append)(PyObject *, PyObject *);
+  static Py_ssize_t (*py3_PyList_Size)(PyObject *);
+! static int (*py3_PySlice_GetIndicesEx)(PyObject *r, Py_ssize_t length,
+  		     Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength);
+  static PyObject* (*py3_PyErr_NoMemory)(void);
+  static void (*py3_Py_Finalize)(void);
+*** ../vim-7.3.312/src/version.c	2011-09-14 17:50:05.000000000 +0200
+--- src/version.c	2011-09-14 18:56:03.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     313,
+  /**/
+
+-- 
+All good vision statements are created by groups of people with bloated
+bladders who would rather be doing anything else.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.314 b/source/ap/vim/patches/7.3.314
new file mode 100644
index 00000000..76415d65
--- /dev/null
+++ b/source/ap/vim/patches/7.3.314
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.314
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.314 (after 7.3.304)
+Problem:    Missing parenthesis.
+Solution:   Add it. (Benjamin R. Haskell)
+Files:	    src/Make_mvc.mak
+
+
+*** ../vim-7.3.313/src/Make_mvc.mak	2011-09-14 10:49:44.000000000 +0200
+--- src/Make_mvc.mak	2011-09-14 18:56:24.000000000 +0200
+***************
+*** 785,791 ****
+  PERL_INC = /I $(PERL_INCDIR)
+  PERL_OBJ = $(OUTDIR)\if_perl.obj $(OUTDIR)\if_perlsfio.obj
+  XSUBPP = $(PERL)\lib\ExtUtils\xsubpp
+! !if exist($(XSUBPP)
+  XSUBPP = $(PERL_EXE) $(XSUBPP)
+  !else
+  XSUBPP = xsubpp
+--- 785,791 ----
+  PERL_INC = /I $(PERL_INCDIR)
+  PERL_OBJ = $(OUTDIR)\if_perl.obj $(OUTDIR)\if_perlsfio.obj
+  XSUBPP = $(PERL)\lib\ExtUtils\xsubpp
+! !if exist($(XSUBPP))
+  XSUBPP = $(PERL_EXE) $(XSUBPP)
+  !else
+  XSUBPP = xsubpp
+*** ../vim-7.3.313/src/version.c	2011-09-14 18:59:35.000000000 +0200
+--- src/version.c	2011-09-14 19:01:12.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     314,
+  /**/
+
+-- 
+Often you're less important than your furniture.  If you think about it, you
+can get fired but your furniture stays behind, gainfully employed at the
+company that didn't need _you_ anymore.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.315 b/source/ap/vim/patches/7.3.315
new file mode 100644
index 00000000..2240f7b7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.315
@@ -0,0 +1,475 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.315
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.315
+Problem:    Opening a window before forking causes problems for GTK.
+Solution:   Fork first, create the window in the child and report back to the
+	    parent process whether it worked.  If successful the parent exits,
+	    if unsuccessful the child exits and the parent continues in the
+	    terminal. (Tim Starling)
+Files:	    src/gui.c
+
+
+*** ../vim-7.3.314/src/gui.c	2011-08-10 17:44:41.000000000 +0200
+--- src/gui.c	2011-09-14 17:34:30.000000000 +0200
+***************
+*** 37,42 ****
+--- 37,60 ----
+  static void gui_set_bg_color __ARGS((char_u *name));
+  static win_T *xy2win __ARGS((int x, int y));
+  
++ #if defined(UNIX) && !defined(__BEOS__) && !defined(MACOS_X) \
++ 	&& !defined(__APPLE__)
++ # define MAY_FORK
++ static void gui_do_fork __ARGS((void));
++ 
++ static int gui_read_child_pipe __ARGS((int fd));
++ 
++ /* Return values for gui_read_child_pipe */
++ enum {
++     GUI_CHILD_IO_ERROR,
++     GUI_CHILD_OK,
++     GUI_CHILD_FAILED
++ };
++ 
++ #endif /* MAY_FORK */
++ 
++ static void gui_attempt_start __ARGS((void));
++ 
+  static int can_update_cursor = TRUE; /* can display the cursor */
+  
+  /*
+***************
+*** 59,105 ****
+  gui_start()
+  {
+      char_u	*old_term;
+- #if defined(UNIX) && !defined(__BEOS__) && !defined(MACOS_X) \
+- 	&& !defined(__APPLE__)
+- # define MAY_FORK
+-     int		dofork = TRUE;
+- #endif
+      static int	recursive = 0;
+  
+      old_term = vim_strsave(T_NAME);
+  
+-     /*
+-      * Set_termname() will call gui_init() to start the GUI.
+-      * Set the "starting" flag, to indicate that the GUI will start.
+-      *
+-      * We don't want to open the GUI shell until after we've read .gvimrc,
+-      * otherwise we don't know what font we will use, and hence we don't know
+-      * what size the shell should be.  So if there are errors in the .gvimrc
+-      * file, they will have to go to the terminal: Set full_screen to FALSE.
+-      * full_screen will be set to TRUE again by a successful termcapinit().
+-      */
+      settmode(TMODE_COOK);		/* stop RAW mode */
+      if (full_screen)
+  	cursor_on();			/* needed for ":gui" in .vimrc */
+-     gui.starting = TRUE;
+      full_screen = FALSE;
+  
+! #ifdef FEAT_GUI_GTK
+!     gui.event_time = GDK_CURRENT_TIME;
+! #endif
+  
+  #ifdef MAY_FORK
+!     if (!gui.dofork || vim_strchr(p_go, GO_FORG) || recursive)
+! 	dofork = FALSE;
+  #endif
+!     ++recursive;
+! 
+!     termcapinit((char_u *)"builtin_gui");
+!     gui.starting = recursive - 1;
+  
+      if (!gui.in_use)			/* failed to start GUI */
+      {
+! 	termcapinit(old_term);		/* back to old term settings */
+  	settmode(TMODE_RAW);		/* restart RAW mode */
+  #ifdef FEAT_TITLE
+  	set_title_defaults();		/* set 'title' and 'icon' again */
+--- 77,123 ----
+  gui_start()
+  {
+      char_u	*old_term;
+      static int	recursive = 0;
+  
+      old_term = vim_strsave(T_NAME);
+  
+      settmode(TMODE_COOK);		/* stop RAW mode */
+      if (full_screen)
+  	cursor_on();			/* needed for ":gui" in .vimrc */
+      full_screen = FALSE;
+  
+!     ++recursive;
+  
+  #ifdef MAY_FORK
+!     /*
+!      * Quit the current process and continue in the child.
+!      * Makes "gvim file" disconnect from the shell it was started in.
+!      * Don't do this when Vim was started with "-f" or the 'f' flag is present
+!      * in 'guioptions'.
+!      */
+!     if (gui.dofork && !vim_strchr(p_go, GO_FORG) && recursive <= 1)
+!     {
+! 	gui_do_fork();
+!     }
+!     else
+  #endif
+!     {
+! 	gui_attempt_start();
+!     }
+  
+      if (!gui.in_use)			/* failed to start GUI */
+      {
+! 	/* Back to old term settings
+! 	 *
+! 	 * FIXME: If we got here because a child process failed and flagged to
+! 	 * the parent to resume, and X11 is enabled with FEAT_TITLE, this will
+! 	 * hit an X11 I/O error and do a longjmp(), leaving recursive
+! 	 * permanently set to 1. This is probably not as big a problem as it
+! 	 * sounds, because gui_mch_init() in both gui_x11.c and gui_gtk_x11.c
+! 	 * return "OK" unconditionally, so it would be very difficult to
+! 	 * actually hit this case.
+! 	 */
+! 	termcapinit(old_term);
+  	settmode(TMODE_RAW);		/* restart RAW mode */
+  #ifdef FEAT_TITLE
+  	set_title_defaults();		/* set 'title' and 'icon' again */
+***************
+*** 108,113 ****
+--- 126,166 ----
+  
+      vim_free(old_term);
+  
++ #ifdef FEAT_AUTOCMD
++     /* If the GUI started successfully, trigger the GUIEnter event, otherwise
++      * the GUIFailed event. */
++     gui_mch_update();
++     apply_autocmds(gui.in_use ? EVENT_GUIENTER : EVENT_GUIFAILED,
++ 						   NULL, NULL, FALSE, curbuf);
++ #endif
++     --recursive;
++ }
++ 
++ /*
++  * Set_termname() will call gui_init() to start the GUI.
++  * Set the "starting" flag, to indicate that the GUI will start.
++  *
++  * We don't want to open the GUI shell until after we've read .gvimrc,
++  * otherwise we don't know what font we will use, and hence we don't know
++  * what size the shell should be.  So if there are errors in the .gvimrc
++  * file, they will have to go to the terminal: Set full_screen to FALSE.
++  * full_screen will be set to TRUE again by a successful termcapinit().
++  */
++     static void
++ gui_attempt_start()
++ {
++     static int recursive = 0;
++ 
++     ++recursive;
++     gui.starting = TRUE;
++ 
++ #ifdef FEAT_GUI_GTK
++     gui.event_time = GDK_CURRENT_TIME;
++ #endif
++ 
++     termcapinit((char_u *)"builtin_gui");
++     gui.starting = recursive - 1;
++ 
+  #if defined(FEAT_GUI_GTK) || defined(FEAT_GUI_X11)
+      if (gui.in_use)
+      {
+***************
+*** 123,218 ****
+  	display_errors();
+      }
+  #endif
+  
+! #if defined(MAY_FORK) && !defined(__QNXNTO__)
+!     /*
+!      * Quit the current process and continue in the child.
+!      * Makes "gvim file" disconnect from the shell it was started in.
+!      * Don't do this when Vim was started with "-f" or the 'f' flag is present
+!      * in 'guioptions'.
+!      */
+!     if (gui.in_use && dofork)
+      {
+! 	int	pipefd[2];	/* pipe between parent and child */
+! 	int	pipe_error;
+! 	char	dummy;
+! 	pid_t	pid = -1;
+! 
+! 	/* Setup a pipe between the child and the parent, so that the parent
+! 	 * knows when the child has done the setsid() call and is allowed to
+! 	 * exit. */
+! 	pipe_error = (pipe(pipefd) < 0);
+! 	pid = fork();
+! 	if (pid > 0)	    /* Parent */
+  	{
+! 	    /* Give the child some time to do the setsid(), otherwise the
+! 	     * exit() may kill the child too (when starting gvim from inside a
+! 	     * gvim). */
+! 	    if (pipe_error)
+! 		ui_delay(300L, TRUE);
+! 	    else
+  	    {
+! 		/* The read returns when the child closes the pipe (or when
+! 		 * the child dies for some reason). */
+! 		close(pipefd[1]);
+! 		ignored = (int)read(pipefd[0], &dummy, (size_t)1);
+! 		close(pipefd[0]);
+  	    }
+! 
+! 	    /* When swapping screens we may need to go to the next line, e.g.,
+! 	     * after a hit-enter prompt and using ":gui". */
+! 	    if (newline_on_exit)
+! 		mch_errmsg("\r\n");
+! 
+! 	    /*
+! 	     * The parent must skip the normal exit() processing, the child
+! 	     * will do it.  For example, GTK messes up signals when exiting.
+! 	     */
+! 	    _exit(0);
+  	}
+  
+! # if defined(HAVE_SETSID) || defined(HAVE_SETPGID)
+  	/*
+! 	 * Change our process group.  On some systems/shells a CTRL-C in the
+! 	 * shell where Vim was started would otherwise kill gvim!
+  	 */
+! 	if (pid == 0)	    /* child */
+  #  if defined(HAVE_SETSID)
+! 	    (void)setsid();
+  #  else
+! 	    (void)setpgid(0, 0);
+  #  endif
+  # endif
+! 	if (!pipe_error)
+! 	{
+! 	    close(pipefd[0]);
+! 	    close(pipefd[1]);
+! 	}
+  
+  # if defined(FEAT_GUI_GNOME) && defined(FEAT_SESSION)
+! 	/* Tell the session manager our new PID */
+! 	gui_mch_forked();
+  # endif
+      }
+- #else
+- # if defined(__QNXNTO__)
+-     if (gui.in_use && dofork)
+- 	procmgr_daemon(0, PROCMGR_DAEMON_KEEPUMASK | PROCMGR_DAEMON_NOCHDIR |
+- 		PROCMGR_DAEMON_NOCLOSE | PROCMGR_DAEMON_NODEVNULL);
+- # endif
+- #endif
+  
+! #ifdef FEAT_AUTOCMD
+!     /* If the GUI started successfully, trigger the GUIEnter event, otherwise
+!      * the GUIFailed event. */
+!     gui_mch_update();
+!     apply_autocmds(gui.in_use ? EVENT_GUIENTER : EVENT_GUIFAILED,
+! 						   NULL, NULL, FALSE, curbuf);
+  #endif
+  
+!     --recursive;
+  }
+  
+  /*
+   * Call this when vim starts up, whether or not the GUI is started
+   */
+--- 176,346 ----
+  	display_errors();
+      }
+  #endif
++     --recursive;
++ }
+  
+! #ifdef MAY_FORK
+! 
+! /* for waitpid() */
+! # if defined(HAVE_SYS_WAIT_H) || defined(HAVE_UNION_WAIT)
+! #  include <sys/wait.h>
+! # endif
+! 
+! /*
+!  * Create a new process, by forking. In the child, start the GUI, and in
+!  * the parent, exit.
+!  *
+!  * If something goes wrong, this will return with gui.in_use still set
+!  * to FALSE, in which case the caller should continue execution without
+!  * the GUI.
+!  *
+!  * If the child fails to start the GUI, then the child will exit and the
+!  * parent will return. If the child succeeds, then the parent will exit
+!  * and the child will return.
+!  */
+!     static void
+! gui_do_fork()
+! {
+! #ifdef __QNXNTO__
+!     procmgr_daemon(0, PROCMGR_DAEMON_KEEPUMASK | PROCMGR_DAEMON_NOCHDIR |
+! 	    PROCMGR_DAEMON_NOCLOSE | PROCMGR_DAEMON_NODEVNULL);
+!     gui_attempt_start();
+!     return;
+! #else
+!     int		pipefd[2];	/* pipe between parent and child */
+!     int		pipe_error;
+!     int		status;
+!     int		exit_status;
+!     pid_t	pid = -1;
+!     FILE	*parent_file;
+! 
+!     /* Setup a pipe between the child and the parent, so that the parent
+!      * knows when the child has done the setsid() call and is allowed to
+!      * exit. */
+!     pipe_error = (pipe(pipefd) < 0);
+!     pid = fork();
+!     if (pid < 0)	    /* Fork error */
+      {
+! 	EMSG(_("E851: Failed to create a new process for the GUI"));
+! 	return;
+!     }
+!     else if (pid > 0)	    /* Parent */
+!     {
+! 	/* Give the child some time to do the setsid(), otherwise the
+! 	 * exit() may kill the child too (when starting gvim from inside a
+! 	 * gvim). */
+! 	if (!pipe_error)
+  	{
+! 	    /* The read returns when the child closes the pipe (or when
+! 	     * the child dies for some reason). */
+! 	    close(pipefd[1]);
+! 	    status = gui_read_child_pipe(pipefd[0]);
+! 	    if (status == GUI_CHILD_FAILED)
+  	    {
+! 		/* The child failed to start the GUI, so the caller must
+! 		 * continue. There may be more error information written
+! 		 * to stderr by the child. */
+! # ifdef __NeXT__
+! 		wait4(pid, &exit_status, 0, (struct rusage *)0);
+! # else
+! 		waitpid(pid, &exit_status, 0);
+! # endif
+! 		EMSG(_("E852: The child process failed to start the GUI"));
+! 		return;
+  	    }
+! 	    else if (status == GUI_CHILD_IO_ERROR)
+! 	    {
+! 		pipe_error = TRUE;
+! 	    }
+! 	    /* else GUI_CHILD_OK: parent exit */
+  	}
+  
+! 	if (pipe_error)
+! 	    ui_delay(300L, TRUE);
+! 
+! 	/* When swapping screens we may need to go to the next line, e.g.,
+! 	 * after a hit-enter prompt and using ":gui". */
+! 	if (newline_on_exit)
+! 	    mch_errmsg("\r\n");
+! 
+  	/*
+! 	 * The parent must skip the normal exit() processing, the child
+! 	 * will do it.  For example, GTK messes up signals when exiting.
+  	 */
+! 	_exit(0);
+!     }
+!     /* Child */
+! 
+! # if defined(HAVE_SETSID) || defined(HAVE_SETPGID)
+!     /*
+!      * Change our process group.  On some systems/shells a CTRL-C in the
+!      * shell where Vim was started would otherwise kill gvim!
+!      */
+  #  if defined(HAVE_SETSID)
+!     (void)setsid();
+  #  else
+!     (void)setpgid(0, 0);
+  #  endif
+  # endif
+!     if (!pipe_error)
+! 	close(pipefd[0]);
+  
+  # if defined(FEAT_GUI_GNOME) && defined(FEAT_SESSION)
+!     /* Tell the session manager our new PID */
+!     gui_mch_forked();
+  # endif
++ 
++     if (!pipe_error)
++ 	parent_file = fdopen(pipefd[1], "w");
++     else
++ 	parent_file = NULL;
++ 
++     /* Try to start the GUI */
++     gui_attempt_start();
++ 
++     /* Notify the parent */
++     if (parent_file != NULL)
++     {
++ 	fputs(gui.in_use ? "ok" : "fail", parent_file);
++ 	fclose(parent_file);
+      }
+  
+!     /* If we failed to start the GUI, exit now. */
+!     if (!gui.in_use)
+! 	exit(1);
+  #endif
++ }
+  
+! /*
+!  * Read from a pipe assumed to be connected to the child process (this
+!  * function is called from the parent).
+!  * Return GUI_CHILD_OK if the child successfully started the GUI,
+!  * GUY_CHILD_FAILED if the child failed, or GUI_CHILD_IO_ERROR if there was
+!  * some other error.
+!  *
+!  * The file descriptor will be closed before the function returns.
+!  */
+!     static int
+! gui_read_child_pipe(int fd)
+! {
+!     size_t	bytes_read;
+!     FILE	*file;
+!     char	buffer[10];
+! 
+!     file = fdopen(fd, "r");
+!     if (!file)
+! 	return GUI_CHILD_IO_ERROR;
+! 
+!     bytes_read = fread(buffer, sizeof(char), sizeof(buffer)-1, file);
+!     buffer[bytes_read] = '\0';
+!     fclose(file);
+!     if (strcmp(buffer, "ok") == 0)
+! 	return GUI_CHILD_OK;
+!     return GUI_CHILD_FAILED;
+  }
+  
++ #endif /* MAY_FORK */
++ 
+  /*
+   * Call this when vim starts up, whether or not the GUI is started
+   */
+*** ../vim-7.3.314/src/version.c	2011-09-14 19:01:38.000000000 +0200
+--- src/version.c	2011-09-14 19:02:45.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     315,
+  /**/
+
+-- 
+A)bort, R)etry, B)ang it with a large hammer
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.316 b/source/ap/vim/patches/7.3.316
new file mode 100644
index 00000000..96a7d42b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.316
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.316
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.316 (after 7.3.306)
+Problem:    Crash when 'colorcolumn' is set and closing buffer.
+Solution:   Check for w_buffer to be NULL. (Yasuhiro Matsumoto)
+Files:	    src/option.c
+
+
+*** ../vim-7.3.315/src/option.c	2011-06-12 22:13:37.000000000 +0200
+--- src/option.c	2011-09-21 13:26:31.000000000 +0200
+***************
+*** 7036,7041 ****
+--- 7036,7044 ----
+      int		i;
+      int		j = 0;
+  
++     if (wp->w_buffer == NULL)
++ 	return NULL;  /* buffer was closed */
++ 
+      for (s = wp->w_p_cc; *s != NUL && count < 255;)
+      {
+  	if (*s == '-' || *s == '+')
+*** ../vim-7.3.315/src/version.c	2011-09-14 19:04:35.000000000 +0200
+--- src/version.c	2011-09-21 13:40:05.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     316,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+25. You believe nothing looks sexier than a man in boxer shorts illuminated
+    only by a 17" inch svga monitor.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.317 b/source/ap/vim/patches/7.3.317
new file mode 100644
index 00000000..220cae21
--- /dev/null
+++ b/source/ap/vim/patches/7.3.317
@@ -0,0 +1,116 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.317
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.317
+Problem:    Calling debug.debug() in Lua may cause Vim to hang.
+Solution:   Add a better debug method. (Rob Hoelz, Luis Carvalho)
+Files:	    src/if_lua.c
+
+
+*** ../vim-7.3.316/src/if_lua.c	2011-01-17 19:53:20.000000000 +0100
+--- src/if_lua.c	2011-09-21 17:15:21.000000000 +0200
+***************
+*** 100,105 ****
+--- 100,106 ----
+  #define lua_setfield dll_lua_setfield
+  #define lua_rawset dll_lua_rawset
+  #define lua_rawseti dll_lua_rawseti
++ #define lua_remove dll_lua_remove
+  #define lua_setmetatable dll_lua_setmetatable
+  #define lua_call dll_lua_call
+  #define lua_pcall dll_lua_pcall
+***************
+*** 161,166 ****
+--- 162,168 ----
+  void (*dll_lua_setfield) (lua_State *L, int idx, const char *k);
+  void (*dll_lua_rawset) (lua_State *L, int idx);
+  void (*dll_lua_rawseti) (lua_State *L, int idx, int n);
++ void (*dll_lua_remove) (lua_State *L, int idx);
+  int (*dll_lua_setmetatable) (lua_State *L, int objindex);
+  void (*dll_lua_call) (lua_State *L, int nargs, int nresults);
+  int (*dll_lua_pcall) (lua_State *L, int nargs, int nresults, int errfunc);
+***************
+*** 229,234 ****
+--- 231,237 ----
+      {"lua_setfield", (luaV_function) &dll_lua_setfield},
+      {"lua_rawset", (luaV_function) &dll_lua_rawset},
+      {"lua_rawseti", (luaV_function) &dll_lua_rawseti},
++     {"lua_remove", (luaV_function) &dll_lua_remove},
+      {"lua_setmetatable", (luaV_function) &dll_lua_setmetatable},
+      {"lua_call", (luaV_function) &dll_lua_call},
+      {"lua_pcall", (luaV_function) &dll_lua_pcall},
+***************
+*** 924,929 ****
+--- 927,957 ----
+  }
+  
+      static int
++ luaV_debug(lua_State *L)
++ {
++     lua_settop(L, 0);
++     lua_getglobal(L, "vim");
++     lua_getfield(L, -1, "eval");
++     lua_remove(L, -2); /* vim.eval at position 1 */
++     for (;;)
++     {
++ 	const char *input;
++ 	size_t l;
++ 	lua_pushvalue(L, 1); /* vim.eval */
++ 	lua_pushliteral(L, "input('lua_debug> ')");
++ 	lua_call(L, 1, 1); /* return string */
++ 	input = lua_tolstring(L, -1, &l);
++ 	if (l == 0 || strcmp(input, "cont") == 0)
++ 	    return 0;
++ 	msg_putchar('\n'); /* avoid outputting on input line */
++ 	if (luaL_loadbuffer(L, input, l, "=(debug command)")
++ 		|| lua_pcall(L, 0, 0, 0))
++ 	    luaV_emsg(L);
++ 	lua_settop(L, 1); /* remove eventual returns, but keep vim.eval */
++     }
++ }
++ 
++     static int
+  luaV_command(lua_State *L)
+  {
+      do_cmdline_cmd((char_u *) luaL_checkstring(L, 1));
+***************
+*** 1082,1087 ****
+--- 1110,1120 ----
+      /* print */
+      lua_pushcfunction(L, luaV_print);
+      lua_setglobal(L, "print");
++     /* debug.debug */
++     lua_getglobal(L, "debug");
++     lua_pushcfunction(L, luaV_debug);
++     lua_setfield(L, -2, "debug");
++     lua_pop(L, 1);
+      /* free */
+      lua_pushlightuserdata(L, (void *) LUAVIM_FREE);
+      lua_pushcfunction(L, luaV_free);
+*** ../vim-7.3.316/src/version.c	2011-09-21 13:40:13.000000000 +0200
+--- src/version.c	2011-09-21 17:14:01.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     317,
+  /**/
+
+-- 
+Q: What is the difference betwee open-source and commercial software?
+A: If you have a problem with commercial software you can call a phone
+   number and they will tell you it might be solved in a future version.
+   For open-source software there isn't a phone number to call, but you
+   get the solution within a day.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.318 b/source/ap/vim/patches/7.3.318
new file mode 100644
index 00000000..36944802
--- /dev/null
+++ b/source/ap/vim/patches/7.3.318
@@ -0,0 +1,90 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.318
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.318
+Problem:    "C" on the last line deletes that line if it's blank.
+Solution:   Only delete the last line for a delete operation. (James Vega)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.317/src/ops.c	2011-08-10 12:10:55.000000000 +0200
+--- src/ops.c	2011-09-21 17:32:36.000000000 +0200
+***************
+*** 1922,1928 ****
+  		    curwin->w_cursor.coladd = 0;
+  	    }
+  #endif
+! 	    if (oap->inclusive && oap->end.lnum == curbuf->b_ml.ml_line_count
+  		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+  	    {
+  		/* Special case: gH<Del> deletes the last line. */
+--- 1922,1930 ----
+  		    curwin->w_cursor.coladd = 0;
+  	    }
+  #endif
+! 	    if (oap->op_type == OP_DELETE
+! 		    && oap->inclusive
+! 		    && oap->end.lnum == curbuf->b_ml.ml_line_count
+  		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+  	    {
+  		/* Special case: gH<Del> deletes the last line. */
+***************
+*** 3331,3338 ****
+  	if (regname == '=')
+  	{
+  	    /* For the = register we need to split the string at NL
+! 	     * characters. */
+! 	    /* Loop twice: count the number of lines and save them. */
+  	    for (;;)
+  	    {
+  		y_size = 0;
+--- 3333,3340 ----
+  	if (regname == '=')
+  	{
+  	    /* For the = register we need to split the string at NL
+! 	     * characters.
+! 	     * Loop twice: count the number of lines and save them. */
+  	    for (;;)
+  	    {
+  		y_size = 0;
+***************
+*** 3348,3354 ****
+  			if (y_array != NULL)
+  			    *ptr = NUL;
+  			++ptr;
+! 			/* A trailing '\n' makes the string linewise */
+  			if (*ptr == NUL)
+  			{
+  			    y_type = MLINE;
+--- 3350,3356 ----
+  			if (y_array != NULL)
+  			    *ptr = NUL;
+  			++ptr;
+! 			/* A trailing '\n' makes the register linewise. */
+  			if (*ptr == NUL)
+  			{
+  			    y_type = MLINE;
+*** ../vim-7.3.317/src/version.c	2011-09-21 17:15:34.000000000 +0200
+--- src/version.c	2011-09-21 17:31:48.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     318,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+26. You check your mail. It says "no new messages." So you check it again.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.319 b/source/ap/vim/patches/7.3.319
new file mode 100644
index 00000000..68448ab6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.319
@@ -0,0 +1,154 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.319
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.319 (after 7.3.311)
+Problem:    Redobuff doesn't always include changes of the completion leader.
+Solution:   Insert backspaces as needed. (idea by Taro Muraoka)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.318/src/edit.c	2011-09-14 16:52:02.000000000 +0200
+--- src/edit.c	2011-09-21 17:59:10.000000000 +0200
+***************
+*** 163,168 ****
+--- 163,169 ----
+  static void ins_compl_set_original_text __ARGS((char_u *str));
+  static void ins_compl_addfrommatch __ARGS((void));
+  static int  ins_compl_prep __ARGS((int c));
++ static void ins_compl_fixRedoBufForLeader __ARGS((char_u *ptr_arg));
+  static buf_T *ins_compl_next_buf __ARGS((buf_T *buf, int flag));
+  #if defined(FEAT_COMPL_FUNC) || defined(FEAT_EVAL)
+  static void ins_compl_add_list __ARGS((list_T *list));
+***************
+*** 3713,3721 ****
+  	     * memory that was used, and make sure we can redo the insert. */
+  	    if (compl_curr_match != NULL || compl_leader != NULL || c == Ctrl_E)
+  	    {
+- 		char_u	*p;
+- 		int	temp = 0;
+- 
+  		/*
+  		 * If any of the original typed text has been changed, eg when
+  		 * ignorecase is set, we must add back-spaces to the redo
+--- 3714,3719 ----
+***************
+*** 3726,3750 ****
+  		 */
+  		if (compl_curr_match != NULL && compl_used_match && c != Ctrl_E)
+  		    ptr = compl_curr_match->cp_str;
+- 		else if (compl_leader != NULL)
+- 		    ptr = compl_leader;
+  		else
+! 		    ptr = compl_orig_text;
+! 		if (compl_orig_text != NULL)
+! 		{
+! 		    p = compl_orig_text;
+! 		    for (temp = 0; p[temp] != NUL && p[temp] == ptr[temp];
+! 								       ++temp)
+! 			;
+! #ifdef FEAT_MBYTE
+! 		    if (temp > 0)
+! 			temp -= (*mb_head_off)(compl_orig_text, p + temp);
+! #endif
+! 		    for (p += temp; *p != NUL; mb_ptr_adv(p))
+! 			AppendCharToRedobuff(K_BS);
+! 		}
+! 		if (ptr != NULL)
+! 		    AppendToRedobuffLit(ptr + temp, -1);
+  	    }
+  
+  #ifdef FEAT_CINDENT
+--- 3724,3732 ----
+  		 */
+  		if (compl_curr_match != NULL && compl_used_match && c != Ctrl_E)
+  		    ptr = compl_curr_match->cp_str;
+  		else
+! 		    ptr = NULL;
+! 		ins_compl_fixRedoBufForLeader(ptr);
+  	    }
+  
+  #ifdef FEAT_CINDENT
+***************
+*** 3834,3839 ****
+--- 3816,3859 ----
+  }
+  
+  /*
++  * Fix the redo buffer for the completion leader replacing some of the typed
++  * text.  This inserts backspaces and appends the changed text.
++  * "ptr" is the known leader text or NUL.
++  */
++     static void
++ ins_compl_fixRedoBufForLeader(ptr_arg)
++     char_u *ptr_arg;
++ {
++     int	    len;
++     char_u  *p;
++     char_u  *ptr = ptr_arg;
++ 
++     if (ptr == NULL)
++     {
++ 	if (compl_leader != NULL)
++ 	    ptr = compl_leader;
++ 	else
++ 	    return;  /* nothing to do */
++     }
++     if (compl_orig_text != NULL)
++     {
++ 	p = compl_orig_text;
++ 	for (len = 0; p[len] != NUL && p[len] == ptr[len]; ++len)
++ 	    ;
++ #ifdef FEAT_MBYTE
++ 	if (len > 0)
++ 	    len -= (*mb_head_off)(p, p + len);
++ #endif
++ 	for (p += len; *p != NUL; mb_ptr_adv(p))
++ 	    AppendCharToRedobuff(K_BS);
++     }
++     else
++ 	len = 0;
++     if (ptr != NULL)
++ 	AppendToRedobuffLit(ptr + len, -1);
++ }
++ 
++ /*
+   * Loops through the list of windows, loaded-buffers or non-loaded-buffers
+   * (depending on flag) starting from buf and looking for a non-scanned
+   * buffer (other than curbuf).	curbuf is special, if it is called with
+***************
+*** 5241,5246 ****
+--- 5261,5270 ----
+  	else
+  	    edit_submode = (char_u *)_(CTRL_X_MSG(ctrl_x_mode));
+  
++ 	/* If any of the original typed text has been changed we need to fix
++ 	 * the redo buffer. */
++ 	ins_compl_fixRedoBufForLeader(NULL);
++ 
+  	/* Always add completion for the original text. */
+  	vim_free(compl_orig_text);
+  	compl_orig_text = vim_strnsave(line + compl_col, compl_length);
+*** ../vim-7.3.318/src/version.c	2011-09-21 17:33:49.000000000 +0200
+--- src/version.c	2011-09-21 18:21:07.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     319,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+27. You refer to your age as 3.x.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.320 b/source/ap/vim/patches/7.3.320
new file mode 100644
index 00000000..3b957c29
--- /dev/null
+++ b/source/ap/vim/patches/7.3.320
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.320
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.320
+Problem:    When a 0xa0 character is in a sourced file the error message for
+	    unrecognized command does not show the problem.
+Solution:   Display 0xa0 as <a0>.
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.319/src/ex_docmd.c	2011-07-20 16:36:35.000000000 +0200
+--- src/ex_docmd.c	2011-09-21 19:02:15.000000000 +0200
+***************
+*** 61,66 ****
+--- 61,67 ----
+  static char_u	*do_one_cmd __ARGS((char_u **, int, char_u *(*fgetline)(int, void *, int), void *cookie));
+  static int	if_level = 0;		/* depth in :if */
+  #endif
++ static void	append_command __ARGS((char_u *cmd));
+  static char_u	*find_command __ARGS((exarg_T *eap, int *full));
+  
+  static void	ex_abbreviate __ARGS((exarg_T *eap));
+***************
+*** 2136,2145 ****
+  	{
+  	    STRCPY(IObuff, _("E492: Not an editor command"));
+  	    if (!sourcing)
+! 	    {
+! 		STRCAT(IObuff, ": ");
+! 		STRNCAT(IObuff, *cmdlinep, 40);
+! 	    }
+  	    errormsg = IObuff;
+  	}
+  	goto doend;
+--- 2137,2143 ----
+  	{
+  	    STRCPY(IObuff, _("E492: Not an editor command"));
+  	    if (!sourcing)
+! 		append_command(*cmdlinep);
+  	    errormsg = IObuff;
+  	}
+  	goto doend;
+***************
+*** 2708,2715 ****
+  		STRCPY(IObuff, errormsg);
+  		errormsg = IObuff;
+  	    }
+! 	    STRCAT(errormsg, ": ");
+! 	    STRNCAT(errormsg, *cmdlinep, IOSIZE - STRLEN(IObuff) - 1);
+  	}
+  	emsg(errormsg);
+      }
+--- 2706,2712 ----
+  		STRCPY(IObuff, errormsg);
+  		errormsg = IObuff;
+  	    }
+! 	    append_command(*cmdlinep);
+  	}
+  	emsg(errormsg);
+      }
+***************
+*** 2797,2802 ****
+--- 2794,2835 ----
+  }
+  
+  /*
++  * Append "cmd" to the error message in IObuff.
++  * Takes care of limiting the length and handling 0xa0, which would be
++  * invisible otherwise.
++  */
++     static void
++ append_command(cmd)
++     char_u *cmd;
++ {
++     char_u *s = cmd;
++     char_u *d;
++ 
++     STRCAT(IObuff, ": ");
++     d = IObuff + STRLEN(IObuff);
++     while (*s != NUL && d - IObuff < IOSIZE - 7)
++     {
++ 	if (
++ #ifdef FEAT_MBYTE
++ 		enc_utf8 ? (s[0] == 0xc2 && s[1] == 0xa0) :
++ #endif
++ 		*s == 0xa0)
++ 	{
++ 	    s +=
++ #ifdef FEAT_MBYTE
++ 		enc_utf8 ? 2 :
++ #endif
++ 		1;
++ 	    STRCPY(d, "<a0>");
++ 	    d += 4;
++ 	}
++ 	else
++ 	    MB_COPY_CHAR(s, d);
++     }
++     *d = NUL;
++ }
++ 
++ /*
+   * Find an Ex command by its name, either built-in or user.
+   * Start of the name can be found at eap->cmd.
+   * Returns pointer to char after the command name.
+*** ../vim-7.3.319/src/version.c	2011-09-21 18:23:02.000000000 +0200
+--- src/version.c	2011-09-21 19:04:35.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     320,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+28. You have comandeered your teenager's phone line for the net and even his
+    friends know not to call on his line anymore.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.321 b/source/ap/vim/patches/7.3.321
new file mode 100644
index 00000000..6303b013
--- /dev/null
+++ b/source/ap/vim/patches/7.3.321
@@ -0,0 +1,304 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.321
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.321
+Problem:    Code not following Vim style.
+Solution:   Fix the style. (Elias Diem)
+Files:	    src/os_qnx.c
+
+
+*** ../vim-7.3.320/src/os_qnx.c	2011-06-19 01:14:22.000000000 +0200
+--- src/os_qnx.c	2011-09-21 19:48:08.000000000 +0200
+***************
+*** 24,33 ****
+  #if defined(FEAT_GUI_PHOTON)
+      PhChannelParms_t parms;
+  
+!     memset( &parms, 0, sizeof( parms ) );
+      parms.flags = Ph_DYNAMIC_BUFFER;
+  
+!     is_photon_available = (PhAttach( NULL, &parms ) != NULL) ? TRUE : FALSE;
+  #endif
+  }
+  
+--- 24,33 ----
+  #if defined(FEAT_GUI_PHOTON)
+      PhChannelParms_t parms;
+  
+!     memset(&parms, 0, sizeof(parms));
+      parms.flags = Ph_DYNAMIC_BUFFER;
+  
+!     is_photon_available = (PhAttach(NULL, &parms) != NULL) ? TRUE : FALSE;
+  #endif
+  }
+  
+***************
+*** 39,46 ****
+  /* Turn on the clipboard for a console vim when photon is running */
+  void qnx_clip_init()
+  {
+!     if( is_photon_available == TRUE && !gui.in_use)
+! 	clip_init( TRUE );
+  }
+  
+  /*****************************************************************************/
+--- 39,46 ----
+  /* Turn on the clipboard for a console vim when photon is running */
+  void qnx_clip_init()
+  {
+!     if (is_photon_available == TRUE && !gui.in_use)
+! 	clip_init(TRUE);
+  }
+  
+  /*****************************************************************************/
+***************
+*** 48,79 ****
+  
+  /* No support for owning the clipboard */
+  int
+! clip_mch_own_selection( VimClipboard *cbd )
+  {
+      return FALSE;
+  }
+  
+  void
+! clip_mch_lose_selection( VimClipboard *cbd )
+  {
+  }
+  
+  void
+! clip_mch_request_selection( VimClipboard *cbd )
+  {
+      int		    type = MLINE, clip_length = 0, is_type_set = FALSE;
+      void	    *cbdata;
+      PhClipHeader    *clip_header;
+      char_u	    *clip_text = NULL;
+  
+!     cbdata = PhClipboardPasteStart( PhInputGroup( NULL ));
+!     if( cbdata != NULL )
+      {
+  	/* Look for the vim specific clip first */
+! 	clip_header = PhClipboardPasteType( cbdata, CLIP_TYPE_VIM );
+! 	if( clip_header != NULL && clip_header->data != NULL )
+  	{
+! 	    switch( *(char *) clip_header->data )
+  	    {
+  		default: /* fallthrough to line type */
+  		case 'L': type = MLINE; break;
+--- 48,79 ----
+  
+  /* No support for owning the clipboard */
+  int
+! clip_mch_own_selection(VimClipboard *cbd)
+  {
+      return FALSE;
+  }
+  
+  void
+! clip_mch_lose_selection(VimClipboard *cbd)
+  {
+  }
+  
+  void
+! clip_mch_request_selection(VimClipboard *cbd)
+  {
+      int		    type = MLINE, clip_length = 0, is_type_set = FALSE;
+      void	    *cbdata;
+      PhClipHeader    *clip_header;
+      char_u	    *clip_text = NULL;
+  
+!     cbdata = PhClipboardPasteStart(PhInputGroup(NULL));
+!     if (cbdata != NULL)
+      {
+  	/* Look for the vim specific clip first */
+! 	clip_header = PhClipboardPasteType(cbdata, CLIP_TYPE_VIM);
+! 	if (clip_header != NULL && clip_header->data != NULL)
+  	{
+! 	    switch(*(char *) clip_header->data)
+  	    {
+  		default: /* fallthrough to line type */
+  		case 'L': type = MLINE; break;
+***************
+*** 86,112 ****
+  	}
+  
+  	/* Try for just normal text */
+! 	clip_header = PhClipboardPasteType( cbdata, CLIP_TYPE_TEXT );
+! 	if( clip_header != NULL )
+  	{
+  	    clip_text = clip_header->data;
+  	    clip_length  = clip_header->length - 1;
+  
+! 	    if( clip_text != NULL && is_type_set == FALSE )
+  		type = MAUTO;
+  	}
+  
+! 	if( (clip_text != NULL) && (clip_length > 0) )
+  	{
+! 	    clip_yank_selection( type, clip_text, clip_length, cbd );
+  	}
+  
+! 	PhClipboardPasteFinish( cbdata );
+      }
+  }
+  
+  void
+! clip_mch_set_selection( VimClipboard *cbd )
+  {
+      int type;
+      long_u  len;
+--- 86,112 ----
+  	}
+  
+  	/* Try for just normal text */
+! 	clip_header = PhClipboardPasteType(cbdata, CLIP_TYPE_TEXT);
+! 	if (clip_header != NULL)
+  	{
+  	    clip_text = clip_header->data;
+  	    clip_length  = clip_header->length - 1;
+  
+! 	    if (clip_text != NULL && is_type_set == FALSE)
+  		type = MAUTO;
+  	}
+  
+! 	if ((clip_text != NULL) && (clip_length > 0))
+  	{
+! 	    clip_yank_selection(type, clip_text, clip_length, cbd);
+  	}
+  
+! 	PhClipboardPasteFinish(cbdata);
+      }
+  }
+  
+  void
+! clip_mch_set_selection(VimClipboard *cbd)
+  {
+      int type;
+      long_u  len;
+***************
+*** 114,144 ****
+      PhClipHeader clip_header[2];
+  
+      /* Prevent recursion from clip_get_selection() */
+!     if( cbd->owned == TRUE )
+  	return;
+  
+      cbd->owned = TRUE;
+!     clip_get_selection( cbd );
+      cbd->owned = FALSE;
+  
+!     type = clip_convert_selection( &str, &len, cbd );
+!     if( type >= 0 )
+      {
+! 	text_clip = lalloc( len + 1, TRUE ); /* Normal text */
+  
+! 	if( text_clip && vim_clip )
+  	{
+! 	    memset( clip_header, 0, sizeof( clip_header ) );
+  
+! 	    STRNCPY( clip_header[0].type, CLIP_TYPE_VIM, 8 );
+! 	    clip_header[0].length = sizeof( vim_clip );
+  	    clip_header[0].data   = vim_clip;
+  
+! 	    STRNCPY( clip_header[1].type, CLIP_TYPE_TEXT, 8 );
+  	    clip_header[1].length = len + 1;
+  	    clip_header[1].data   = text_clip;
+  
+! 	    switch( type )
+  	    {
+  		default: /* fallthrough to MLINE */
+  		case MLINE:	*vim_clip = 'L'; break;
+--- 114,144 ----
+      PhClipHeader clip_header[2];
+  
+      /* Prevent recursion from clip_get_selection() */
+!     if (cbd->owned == TRUE)
+  	return;
+  
+      cbd->owned = TRUE;
+!     clip_get_selection(cbd);
+      cbd->owned = FALSE;
+  
+!     type = clip_convert_selection(&str, &len, cbd);
+!     if (type >= 0)
+      {
+! 	text_clip = lalloc(len + 1, TRUE); /* Normal text */
+  
+! 	if (text_clip && vim_clip)
+  	{
+! 	    memset(clip_header, 0, sizeof(clip_header));
+  
+! 	    STRNCPY(clip_header[0].type, CLIP_TYPE_VIM, 8);
+! 	    clip_header[0].length = sizeof(vim_clip);
+  	    clip_header[0].data   = vim_clip;
+  
+! 	    STRNCPY(clip_header[1].type, CLIP_TYPE_TEXT, 8);
+  	    clip_header[1].length = len + 1;
+  	    clip_header[1].data   = text_clip;
+  
+! 	    switch(type)
+  	    {
+  		default: /* fallthrough to MLINE */
+  		case MLINE:	*vim_clip = 'L'; break;
+***************
+*** 148,161 ****
+  #endif
+  	    }
+  
+! 	    vim_strncpy( text_clip, str, len );
+  
+  	    vim_clip[ 1 ] = NUL;
+  
+! 	    PhClipboardCopy( PhInputGroup( NULL ), 2, clip_header);
+  	}
+! 	vim_free( text_clip );
+      }
+!     vim_free( str );
+  }
+  #endif
+--- 148,161 ----
+  #endif
+  	    }
+  
+! 	    vim_strncpy(text_clip, str, len);
+  
+  	    vim_clip[ 1 ] = NUL;
+  
+! 	    PhClipboardCopy(PhInputGroup(NULL), 2, clip_header);
+  	}
+! 	vim_free(text_clip);
+      }
+!     vim_free(str);
+  }
+  #endif
+*** ../vim-7.3.320/src/version.c	2011-09-21 19:10:42.000000000 +0200
+--- src/version.c	2011-09-21 19:47:50.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     321,
+  /**/
+
+-- 
+Bypasses are devices that allow some people to dash from point A to
+point B very fast while other people dash from point B to point A very
+fast.  People living at point C, being a point directly in between, are
+often given to wonder what's so great about point A that so many people
+from point B are so keen to get there and what's so great about point B
+that so many people from point A are so keen to get there.  They often
+wish that people would just once and for all work out where the hell
+they wanted to be.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.322 b/source/ap/vim/patches/7.3.322
new file mode 100644
index 00000000..d81b9ec6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.322
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.322
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.322
+Problem:    #ifdef for PDP_RETVAL doesn't work, INT_PTR can be a typedef.
+Solution:   Check the MSC version and 64 bit flags. (Sergiu Dotenco)
+Files:	    src/os_mswin.c
+
+
+*** ../vim-7.3.321/src/os_mswin.c	2011-08-10 17:07:56.000000000 +0200
+--- src/os_mswin.c	2011-09-21 20:09:05.000000000 +0200
+***************
+*** 1781,1787 ****
+  }
+  
+  /* Attempt to make this work for old and new compilers */
+! #if !defined(_MSC_VER) || (_MSC_VER < 1300) || !defined(INT_PTR)
+  # define PDP_RETVAL BOOL
+  #else
+  # define PDP_RETVAL INT_PTR
+--- 1781,1787 ----
+  }
+  
+  /* Attempt to make this work for old and new compilers */
+! #if !defined(_WIN64) && (!defined(_MSC_VER) || _MSC_VER < 1300)
+  # define PDP_RETVAL BOOL
+  #else
+  # define PDP_RETVAL INT_PTR
+*** ../vim-7.3.321/src/version.c	2011-09-21 19:50:00.000000000 +0200
+--- src/version.c	2011-09-21 20:08:29.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     322,
+  /**/
+
+-- 
+Don't Panic!
+		-- The Hitchhiker's Guide to the Galaxy
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.323 b/source/ap/vim/patches/7.3.323
new file mode 100644
index 00000000..10f6d193
--- /dev/null
+++ b/source/ap/vim/patches/7.3.323
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.323
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.323
+Problem:    The default 'errorformat' does not ignore some "included from"
+	    lines.
+Solution:   Add a few more patterns. (Ben Boeckel)
+Files:	    src/option.h
+
+
+*** ../vim-7.3.322/src/option.h	2011-07-27 13:59:12.000000000 +0200
+--- src/option.h	2011-09-30 14:32:13.000000000 +0200
+***************
+*** 33,39 ****
+  #     ifdef EBCDIC
+  #define DFLT_EFM	"%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     else
+! #define DFLT_EFM	"%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c:,%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-Gfrom %f:%l:%c,%-Gfrom %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     endif
+  #    endif
+  #   endif
+--- 33,39 ----
+  #     ifdef EBCDIC
+  #define DFLT_EFM	"%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     else
+! #define DFLT_EFM	"%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c:,%-GIn file included from %f:%l:%c\\,,%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-G%*[ ]from %f:%l:%c,%-G%*[ ]from %f:%l:,%-G%*[ ]from %f:%l\\,,%-G%*[ ]from %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m"
+  #     endif
+  #    endif
+  #   endif
+*** ../vim-7.3.322/src/version.c	2011-09-21 20:09:38.000000000 +0200
+--- src/version.c	2011-09-30 14:38:59.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     323,
+  /**/
+
+-- 
+Due knot trussed yore spell chequer two fined awl miss steaks.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.324 b/source/ap/vim/patches/7.3.324
new file mode 100644
index 00000000..59b5c6c0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.324
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.324
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.324 (after 7.3.237)
+Problem:    Completion for ":compiler" shows color scheme names.
+Solution:   Fix the directory name. (James Vega)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.323/src/ex_getln.c	2011-08-17 16:25:43.000000000 +0200
+--- src/ex_getln.c	2011-09-30 16:22:14.000000000 +0200
+***************
+*** 4546,4552 ****
+      }
+      if (xp->xp_context == EXPAND_COMPILER)
+      {
+! 	char *directories[] = {"colors", NULL};
+  	return ExpandRTDir(pat, num_file, file, directories);
+      }
+      if (xp->xp_context == EXPAND_OWNSYNTAX)
+--- 4546,4552 ----
+      }
+      if (xp->xp_context == EXPAND_COMPILER)
+      {
+! 	char *directories[] = {"compiler", NULL};
+  	return ExpandRTDir(pat, num_file, file, directories);
+      }
+      if (xp->xp_context == EXPAND_OWNSYNTAX)
+*** ../vim-7.3.323/src/version.c	2011-09-30 14:44:49.000000000 +0200
+--- src/version.c	2011-09-30 16:23:15.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     324,
+  /**/
+
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+31. You code your homework in HTML and give your instructor the URL.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.325 b/source/ap/vim/patches/7.3.325
new file mode 100644
index 00000000..80ebc6de
--- /dev/null
+++ b/source/ap/vim/patches/7.3.325
@@ -0,0 +1,64 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.325
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.325
+Problem:    A duplicated function argument gives an internal error.
+Solution:   Give a proper error message. (based on patch by Tyru)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.324/src/eval.c	2011-09-14 16:52:02.000000000 +0200
+--- src/eval.c	2011-09-30 16:32:20.000000000 +0200
+***************
+*** 20461,20466 ****
+--- 20461,20467 ----
+      exarg_T	*eap;
+  {
+      char_u	*theline;
++     int		i;
+      int		j;
+      int		c;
+      int		saved_did_emsg;
+***************
+*** 20707,20712 ****
+--- 20708,20722 ----
+  	    arg = vim_strsave(arg);
+  	    if (arg == NULL)
+  		goto erret;
++ 
++ 	    /* Check for duplicate argument name. */
++ 	    for (i = 0; i < newargs.ga_len; ++i)
++ 		if (STRCMP(((char_u **)(newargs.ga_data))[i], arg) == 0)
++ 		{
++ 		    EMSG2(_("E853: Duplicate argument name: %s"), arg);
++ 		    goto erret;
++ 		}
++ 
+  	    ((char_u **)(newargs.ga_data))[newargs.ga_len] = arg;
+  	    *p = c;
+  	    newargs.ga_len++;
+*** ../vim-7.3.324/src/version.c	2011-09-30 16:23:21.000000000 +0200
+--- src/version.c	2011-09-30 16:39:16.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     325,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+32. You don't know what sex three of your closest friends are, because they
+    have neutral nicknames and you never bothered to ask.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.326 b/source/ap/vim/patches/7.3.326
new file mode 100644
index 00000000..4ad52e96
--- /dev/null
+++ b/source/ap/vim/patches/7.3.326
@@ -0,0 +1,285 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.326
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.326
+Problem:    MingW 4.6 no longer supports the -mno-cygwin option.
+Solution:   Split the Cygwin and MingW makefiles. (Matsushita Shougo)
+Files:	    src/GvimExt/Make_cyg.mak, src/GvimExt/Make_ming.mak,
+	    src/Make_cyg.mak, src/Make_ming.mak, src/xxd/Make_ming.mak,
+	    Filelist
+
+
+*** ../vim-7.3.325/src/GvimExt/Make_cyg.mak	2011-09-30 16:55:18.000000000 +0200
+--- src/GvimExt/Make_cyg.mak	2011-09-30 16:45:49.000000000 +0200
+***************
+*** 0 ****
+--- 1,77 ----
++ # Project: gvimext
++ # Generates gvimext.dll with gcc.
++ # To be used with Cygwin.
++ #
++ # Originally, the DLL base address was fixed: -Wl,--image-base=0x1C000000
++ # Now it is allocated dymanically by the linker by evaluating all DLLs
++ # already loaded in memory. The binary image contains as well information
++ # for automatic pseudo-rebasing, if needed by the system. ALV 2004-02-29
++ 
++ # If cross-compiling set this to yes, else set it to no
++ CROSS = no
++ #CROSS = yes
++ # For the old MinGW 2.95 (the one you get e.g. with debian woody)
++ # set the following variable to yes and check if the executables are
++ # really named that way.
++ # If you have a newer MinGW or you are using cygwin set it to no and
++ # check also the executables
++ MINGWOLD = no
++ 
++ # Link against the shared versions of libgcc/libstdc++ by default.  Set
++ # STATIC_STDCPLUS to "yes" to link against static versions instead.
++ STATIC_STDCPLUS=no
++ #STATIC_STDCPLUS=yes
++ 
++ # Note: -static-libstdc++ is not available until gcc 4.5.x.
++ LDFLAGS += -shared
++ ifeq (yes, $(STATIC_STDCPLUS))
++ LDFLAGS += -static-libgcc -static-libstdc++
++ endif
++ 
++ ifeq ($(CROSS),yes)
++ DEL = rm
++ ifeq ($(MINGWOLD),yes)
++ CXXFLAGS := -O2 -mno-cygwin -fvtable-thunks
++ else
++ CXXFLAGS := -O2 -mno-cygwin
++ endif
++ else
++ CXXFLAGS := -O2 -mno-cygwin
++ ifneq (sh.exe, $(SHELL))
++ DEL = rm
++ else
++ DEL = del
++ endif
++ endif
++ CXX := $(CROSS_COMPILE)g++
++ WINDRES := $(CROSS_COMPILE)windres
++ WINDRES_CXX = $(CXX)
++ WINDRES_FLAGS = --preprocessor="$(WINDRES_CXX) -E -xc" -DRC_INVOKED
++ LIBS :=  -luuid
++ RES  := gvimext.res
++ DEFFILE = gvimext_ming.def
++ OBJ  := gvimext.o
++ 
++ DLL  := gvimext.dll
++ 
++ .PHONY: all all-before all-after clean clean-custom
++ 
++ all: all-before $(DLL) all-after
++ 
++ $(DLL): $(OBJ) $(RES) $(DEFFILE)
++ 	$(CXX) $(LDFLAGS) $(CXXFLAGS) -s -o $@ \
++ 		-Wl,--enable-auto-image-base \
++ 		-Wl,--enable-auto-import \
++ 		-Wl,--whole-archive \
++ 			$^ \
++ 		-Wl,--no-whole-archive \
++ 			$(LIBS)
++ 
++ gvimext.o: gvimext.cpp
++ 	$(CXX) $(CXXFLAGS) -DFEAT_GETTEXT -c $? -o $@
++ 
++ $(RES): gvimext_ming.rc
++ 	$(WINDRES) $(WINDRES_FLAGS) --input-format=rc --output-format=coff -DMING $? -o $@
++ 
++ clean: clean-custom
++ 	-$(DEL)  $(OBJ) $(RES) $(DLL)
+*** ../vim-7.3.325/src/GvimExt/Make_ming.mak	2010-12-30 14:50:46.000000000 +0100
+--- src/GvimExt/Make_ming.mak	2011-09-30 16:47:09.000000000 +0200
+***************
+*** 1,6 ****
+  # Project: gvimext
+  # Generates gvimext.dll with gcc.
+! # Can be used for Cygwin and MingW (MingW ignores -mno-cygwin)
+  #
+  # Originally, the DLL base address was fixed: -Wl,--image-base=0x1C000000
+  # Now it is allocated dymanically by the linker by evaluating all DLLs
+--- 1,6 ----
+  # Project: gvimext
+  # Generates gvimext.dll with gcc.
+! # To be used with MingW.
+  #
+  # Originally, the DLL base address was fixed: -Wl,--image-base=0x1C000000
+  # Now it is allocated dymanically by the linker by evaluating all DLLs
+***************
+*** 31,42 ****
+  ifeq ($(CROSS),yes)
+  DEL = rm
+  ifeq ($(MINGWOLD),yes)
+! CXXFLAGS := -O2 -mno-cygwin -fvtable-thunks
+  else
+! CXXFLAGS := -O2 -mno-cygwin
+  endif
+  else
+! CXXFLAGS := -O2 -mno-cygwin
+  ifneq (sh.exe, $(SHELL))
+  DEL = rm
+  else
+--- 31,42 ----
+  ifeq ($(CROSS),yes)
+  DEL = rm
+  ifeq ($(MINGWOLD),yes)
+! CXXFLAGS := -O2 -fvtable-thunks
+  else
+! CXXFLAGS := -O2
+  endif
+  else
+! CXXFLAGS := -O2
+  ifneq (sh.exe, $(SHELL))
+  DEL = rm
+  else
+***************
+*** 75,78 ****
+  
+  clean: clean-custom
+  	-$(DEL)  $(OBJ) $(RES) $(DLL)
+- 
+--- 75,77 ----
+*** ../vim-7.3.325/src/Make_cyg.mak	2010-11-03 21:59:23.000000000 +0100
+--- src/Make_cyg.mak	2011-09-30 16:48:11.000000000 +0200
+***************
+*** 536,542 ****
+  	$(MAKE) -C xxd -f Make_cyg.mak CC=$(CC) USEDLL=$(USEDLL)
+  
+  GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+! 	$(MAKE) -C GvimExt -f Make_ming.mak CROSS_COMPILE=$(CROSS_COMPILE)
+  
+  vimrun.exe: vimrun.c
+  	$(CC) $(CFLAGS) -o vimrun.exe vimrun.c  $(LIBS)
+--- 536,542 ----
+  	$(MAKE) -C xxd -f Make_cyg.mak CC=$(CC) USEDLL=$(USEDLL)
+  
+  GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+! 	$(MAKE) -C GvimExt -f Make_cyg.mak CROSS_COMPILE=$(CROSS_COMPILE)
+  
+  vimrun.exe: vimrun.c
+  	$(CC) $(CFLAGS) -o vimrun.exe vimrun.c  $(LIBS)
+***************
+*** 565,571 ****
+  endif
+  	-$(DEL) pathdef.c
+  	$(MAKE) -C xxd -f Make_cyg.mak clean
+! 	$(MAKE) -C GvimExt -f Make_ming.mak clean
+  
+  distclean: clean
+  	-$(DEL) obj$(DIRSLASH)*.o
+--- 565,571 ----
+  endif
+  	-$(DEL) pathdef.c
+  	$(MAKE) -C xxd -f Make_cyg.mak clean
+! 	$(MAKE) -C GvimExt -f Make_cyg.mak clean
+  
+  distclean: clean
+  	-$(DEL) obj$(DIRSLASH)*.o
+*** ../vim-7.3.325/src/Make_ming.mak	2011-09-14 10:49:44.000000000 +0200
+--- src/Make_ming.mak	2011-09-30 16:48:11.000000000 +0200
+***************
+*** 641,647 ****
+  	upx vim.exe
+  
+  xxd/xxd.exe: xxd/xxd.c
+! 	$(MAKE) -C xxd -f Make_cyg.mak CC=$(CC)
+  
+  GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+  	$(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE)
+--- 641,647 ----
+  	upx vim.exe
+  
+  xxd/xxd.exe: xxd/xxd.c
+! 	$(MAKE) -C xxd -f Make_ming.mak CC=$(CC)
+  
+  GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+  	$(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE)
+***************
+*** 659,665 ****
+  	-$(DEL) mzscheme_base.c
+  endif
+  	$(MAKE) -C GvimExt -f Make_ming.mak clean
+! 	$(MAKE) -C xxd -f Make_cyg.mak clean
+  
+  ###########################################################################
+  INCL = vim.h feature.h os_win32.h os_dos.h ascii.h keymap.h term.h macros.h \
+--- 659,665 ----
+  	-$(DEL) mzscheme_base.c
+  endif
+  	$(MAKE) -C GvimExt -f Make_ming.mak clean
+! 	$(MAKE) -C xxd -f Make_ming.mak clean
+  
+  ###########################################################################
+  INCL = vim.h feature.h os_win32.h os_dos.h ascii.h keymap.h term.h macros.h \
+*** ../vim-7.3.325/src/xxd/Make_ming.mak	2011-09-30 16:55:18.000000000 +0200
+--- src/xxd/Make_ming.mak	2011-09-30 16:48:34.000000000 +0200
+***************
+*** 0 ****
+--- 1,28 ----
++ # The most simplistic Makefile, for MinGW gcc on MS-DOS
++ 
++ ifndef USEDLL
++ USEDLL = no
++ endif
++ 
++ ifeq (yes, $(USEDLL))
++ DEFINES =
++ LIBS    = -lc
++ else
++ DEFINES =
++ LIBS    =
++ endif
++ 
++ CC = gcc
++ CFLAGS = -O2 -Wall -DWIN32 $(DEFINES)
++ 
++ ifneq (sh.exe, $(SHELL))
++ DEL = rm
++ else
++ DEL = del
++ endif
++ 
++ xxd.exe: xxd.c
++ 	$(CC) $(CFLAGS) -s -o xxd.exe xxd.c $(LIBS)
++ 
++ clean:
++ 	-$(DEL) xxd.exe
+*** ../vim-7.3.325/Filelist	2011-06-12 20:36:00.000000000 +0200
+--- Filelist	2011-09-30 16:49:29.000000000 +0200
+***************
+*** 313,318 ****
+--- 313,319 ----
+  		src/xxd/Make_bc5.mak \
+  		src/xxd/Make_cyg.mak \
+  		src/xxd/Make_djg.mak \
++ 		src/xxd/Make_ming.mak \
+  		src/xxd/Make_mvc.mak \
+  		nsis/gvim.nsi \
+  		nsis/README.txt \
+*** ../vim-7.3.325/src/version.c	2011-09-30 16:39:41.000000000 +0200
+--- src/version.c	2011-09-30 16:49:57.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     326,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+33. You name your children Eudora, Mozilla and Dotcom.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.327 b/source/ap/vim/patches/7.3.327
new file mode 100644
index 00000000..1de5a996
--- /dev/null
+++ b/source/ap/vim/patches/7.3.327
@@ -0,0 +1,64 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.327
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.327
+Problem:    When jumping to a help tag a closed fold doesn't open.
+Solution:   Save and restore KeyTyped. (Yasuhiro Matsumoto)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.326/src/ex_cmds.c	2011-09-14 14:43:21.000000000 +0200
+--- src/ex_cmds.c	2011-09-30 17:24:03.000000000 +0200
+***************
+*** 5508,5513 ****
+--- 5508,5516 ----
+      int		len;
+      char_u	*lang;
+  #endif
++ #ifdef FEAT_FOLDING
++     int		old_KeyTyped = KeyTyped;
++ #endif
+  
+      if (eap != NULL)
+      {
+***************
+*** 5671,5676 ****
+--- 5674,5685 ----
+      if (!p_im)
+  	restart_edit = 0;	    /* don't want insert mode in help file */
+  
++ #ifdef FEAT_FOLDING
++     /* Restore KeyTyped, setting 'filetype=help' may reset it.
++      * It is needed for do_tag top open folds under the cursor. */
++     KeyTyped = old_KeyTyped;
++ #endif
++ 
+      if (tag != NULL)
+  	do_tag(tag, DT_HELP, 1, FALSE, TRUE);
+  
+*** ../vim-7.3.326/src/version.c	2011-09-30 16:56:00.000000000 +0200
+--- src/version.c	2011-09-30 17:24:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     327,
+  /**/
+
+-- 
+Q. What happens to programmers when they die?
+A: MS-Windows programmers are reinstalled.  C++ programmers become undefined,
+   anyone who refers to them will die as well.  Java programmers reincarnate
+   after being garbage collected.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.328 b/source/ap/vim/patches/7.3.328
new file mode 100644
index 00000000..24dad702
--- /dev/null
+++ b/source/ap/vim/patches/7.3.328
@@ -0,0 +1,45 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.328
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.328
+Problem:    When command line wraps the cursor may be displayed wrong when
+	    there are multi-byte characters.
+Solution:   Position the cursor before drawing the text. (Yasuhiro Matsumoto)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.327/src/ex_getln.c	2011-09-30 16:23:21.000000000 +0200
+--- src/ex_getln.c	2011-09-30 17:39:27.000000000 +0200
+***************
+*** 2870,2875 ****
+--- 2870,2876 ----
+  	{
+  	    msg_no_more = TRUE;
+  	    i = cmdline_row;
++ 	    cursorcmd();
+  	    draw_cmdline(ccline.cmdpos, ccline.cmdlen - ccline.cmdpos);
+  	    /* Avoid clearing the rest of the line too often. */
+  	    if (cmdline_row != i || ccline.overstrike)
+*** ../vim-7.3.327/src/version.c	2011-09-30 17:30:27.000000000 +0200
+--- src/version.c	2011-09-30 17:45:28.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     328,
+  /**/
+
+-- 
+To define recursion, we must first define recursion.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.329 b/source/ap/vim/patches/7.3.329
new file mode 100644
index 00000000..fe48eb52
--- /dev/null
+++ b/source/ap/vim/patches/7.3.329
@@ -0,0 +1,72 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.329
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.329
+Problem:    When skipping over code from ":for" to ":endfor" get an error for
+	    calling a dict function. (Yasuhiro Matsumoto)
+Solution:   Ignore errors when skipping over :call command.
+Files:	    src/ex_docmd.c, src/eval.c
+
+
+*** ../vim-7.3.328/src/ex_docmd.c	2011-09-21 19:10:42.000000000 +0200
+--- src/ex_docmd.c	2011-09-30 17:59:51.000000000 +0200
+***************
+*** 371,381 ****
+  # define ex_endif		ex_ni
+  # define ex_else		ex_ni
+  # define ex_while		ex_ni
+- # define ex_for			ex_ni
+  # define ex_continue		ex_ni
+  # define ex_break		ex_ni
+  # define ex_endwhile		ex_ni
+- # define ex_endfor		ex_ni
+  # define ex_throw		ex_ni
+  # define ex_try			ex_ni
+  # define ex_catch		ex_ni
+--- 371,379 ----
+*** ../vim-7.3.328/src/eval.c	2011-09-30 16:39:41.000000000 +0200
+--- src/eval.c	2011-09-30 18:29:58.000000000 +0200
+***************
+*** 3377,3383 ****
+  	/* trans_function_name() doesn't work well when skipping, use eval0()
+  	 * instead to skip to any following command, e.g. for:
+  	 *   :if 0 | call dict.foo().bar() | endif  */
+! 	eval0(eap->arg, &rettv, &eap->nextcmd, FALSE);
+  	return;
+      }
+  
+--- 3377,3386 ----
+  	/* trans_function_name() doesn't work well when skipping, use eval0()
+  	 * instead to skip to any following command, e.g. for:
+  	 *   :if 0 | call dict.foo().bar() | endif  */
+! 	++emsg_skip;
+! 	if (eval0(eap->arg, &rettv, &eap->nextcmd, FALSE) != FAIL)
+! 	    clear_tv(&rettv);
+! 	--emsg_skip;
+  	return;
+      }
+  
+*** ../vim-7.3.328/src/version.c	2011-09-30 17:46:14.000000000 +0200
+--- src/version.c	2011-09-30 18:32:27.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     329,
+  /**/
+
+-- 
+Have you heard about the new Beowulf cluster? It's so fast, it executes
+an infinite loop in 6 seconds.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.330 b/source/ap/vim/patches/7.3.330
new file mode 100644
index 00000000..ab828b94
--- /dev/null
+++ b/source/ap/vim/patches/7.3.330
@@ -0,0 +1,45 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.330
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.330
+Problem:    When longjmp() is invoked if the X server gives an error the state
+	    is not properly restored.
+Solution:   Reset vgetc_busy. (Yukihiro Nakadaira)
+Files:	    src/main.c
+
+
+*** ../vim-7.3.329/src/main.c	2011-05-10 16:41:13.000000000 +0200
+--- src/main.c	2011-10-04 16:41:03.000000000 +0200
+***************
+*** 1009,1014 ****
+--- 1009,1015 ----
+  	skip_redraw = FALSE;
+  	RedrawingDisabled = 0;
+  	no_wait_return = 0;
++ 	vgetc_busy = 0;
+  # ifdef FEAT_EVAL
+  	emsg_skip = 0;
+  # endif
+*** ../vim-7.3.329/src/version.c	2011-09-30 18:35:49.000000000 +0200
+--- src/version.c	2011-10-04 16:42:23.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     330,
+  /**/
+
+-- 
+Just remember...if the world didn't suck, we'd all fall off.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.331 b/source/ap/vim/patches/7.3.331
new file mode 100644
index 00000000..ba63c172
--- /dev/null
+++ b/source/ap/vim/patches/7.3.331
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.331
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.331
+Problem:    "vit" selects wrong text when a tag name starts with the same text
+	    as an outer tag name. (Ben Fritz)
+Solution:   Add "\>" to the pattern to check for word boundary.
+Files:	    src/search.c
+
+
+*** ../vim-7.3.330/src/search.c	2011-07-15 13:21:24.000000000 +0200
+--- src/search.c	2011-10-04 16:54:08.000000000 +0200
+***************
+*** 3927,3933 ****
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     sprintf((char *)spat, "<%.*s\\%%(\\_[^>]\\{-}[^/]>\\|>\\)\\c", len, p);
+      sprintf((char *)epat, "</%.*s>\\c", len, p);
+  
+      r = do_searchpair(spat, (char_u *)"", epat, FORWARD, (char_u *)"",
+--- 3927,3933 ----
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     sprintf((char *)spat, "<%.*s\\>\\%%(\\_[^>]\\{-}[^/]>\\|>\\)\\c", len, p);
+      sprintf((char *)epat, "</%.*s>\\c", len, p);
+  
+      r = do_searchpair(spat, (char_u *)"", epat, FORWARD, (char_u *)"",
+*** ../vim-7.3.330/src/version.c	2011-10-04 16:43:49.000000000 +0200
+--- src/version.c	2011-10-04 16:59:47.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     331,
+  /**/
+
+-- 
+The 50-50-90 rule: Anytime you have a 50-50 chance of getting
+something right, there's a 90% probability you'll get it wrong.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.332 b/source/ap/vim/patches/7.3.332
new file mode 100644
index 00000000..ff0ab7c6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.332
@@ -0,0 +1,206 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.332
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.332 (after 7.3.202)
+Problem:    Indent after "public:" is not increased in C++ code. (Lech Lorens)
+Solution:   Check for namespace after the regular checks. (partly by Martin
+	    Gieseking)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.331/src/misc1.c	2011-09-07 19:58:04.000000000 +0200
+--- src/misc1.c	2011-10-04 17:59:52.000000000 +0200
+***************
+*** 6389,6394 ****
+--- 6389,6395 ----
+      int		lookfor_cpp_namespace = FALSE;
+      int		cont_amount = 0;    /* amount for continuation line */
+      int		original_line_islabel;
++     int		added_to_amount = 0;
+  
+      for (options = curbuf->b_p_cino; *options; )
+      {
+***************
+*** 7216,7267 ****
+  			else
+  			    amount += ind_continuation;
+  		    }
+! 		    else if (lookfor_cpp_namespace)
+  		    {
+! 			if (curwin->w_cursor.lnum == ourscope)
+! 			    continue;
+  
+! 			if (curwin->w_cursor.lnum == 0
+! 				|| curwin->w_cursor.lnum
+  					      < ourscope - FIND_NAMESPACE_LIM)
+! 			    break;
+  
+! 			l = ml_get_curline();
+  
+! 			/*
+! 			 * If we're in a comment now, skip to the start of the
+! 			 * comment.
+! 			 */
+! 			trypos = find_start_comment(ind_maxcomment);
+! 			if (trypos != NULL)
+! 			{
+! 			    curwin->w_cursor.lnum = trypos->lnum + 1;
+! 			    curwin->w_cursor.col = 0;
+! 			    continue;
+! 			}
+! 
+! 			/*
+! 			 * Skip preprocessor directives and blank lines.
+! 			 */
+! 			if (cin_ispreproc_cont(&l, &curwin->w_cursor.lnum))
+! 			    continue;
+  
+! 			if (cin_is_cpp_namespace(l))
+! 			{
+! 			    amount += ind_cpp_namespace;
+! 			    break;
+! 			}
+  
+! 			if (cin_nocode(l))
+! 			    continue;
+  
+! 		    }
+! 		    else if (lookfor != LOOKFOR_TERM
+! 					  && lookfor != LOOKFOR_CPP_BASECLASS)
+! 		    {
+! 			amount = scope_amount;
+! 			if (theline[0] == '{')
+! 			    amount += ind_open_extra;
+  		    }
+  		    break;
+  		}
+--- 7217,7275 ----
+  			else
+  			    amount += ind_continuation;
+  		    }
+! 		    else
+  		    {
+! 			if (lookfor != LOOKFOR_TERM
+! 					  && lookfor != LOOKFOR_CPP_BASECLASS)
+! 			{
+! 			    amount = scope_amount;
+! 			    if (theline[0] == '{')
+! 			    {
+! 				amount += ind_open_extra;
+! 				added_to_amount = ind_open_extra;
+! 			    }
+! 			}
+  
+! 			if (lookfor_cpp_namespace)
+! 			{
+! 			    /*
+! 			     * Looking for C++ namespace, need to look further
+! 			     * back.
+! 			     */
+! 			    if (curwin->w_cursor.lnum == ourscope)
+! 				continue;
+! 
+! 			    if (curwin->w_cursor.lnum == 0
+! 				    || curwin->w_cursor.lnum
+  					      < ourscope - FIND_NAMESPACE_LIM)
+! 				break;
+  
+! 			    l = ml_get_curline();
+  
+! 			    /* If we're in a comment now, skip to the start of
+! 			     * the comment. */
+! 			    trypos = find_start_comment(ind_maxcomment);
+! 			    if (trypos != NULL)
+! 			    {
+! 				curwin->w_cursor.lnum = trypos->lnum + 1;
+! 				curwin->w_cursor.col = 0;
+! 				continue;
+! 			    }
+  
+! 			    /* Skip preprocessor directives and blank lines. */
+! 			    if (cin_ispreproc_cont(&l, &curwin->w_cursor.lnum))
+! 				continue;
+  
+! 			    /* Finally the actual check for "namespace". */
+! 			    if (cin_is_cpp_namespace(l))
+! 			    {
+! 				amount += ind_cpp_namespace - added_to_amount;
+! 				break;
+! 			    }
+  
+! 			    if (cin_nocode(l))
+! 				continue;
+! 			}
+  		    }
+  		    break;
+  		}
+*** ../vim-7.3.331/src/testdir/test3.in	2011-07-20 15:09:38.000000000 +0200
+--- src/testdir/test3.in	2011-10-04 17:45:20.000000000 +0200
+***************
+*** 1309,1314 ****
+--- 1309,1328 ----
+  };
+  
+  STARTTEST
++ :set cino=(0,gs,hs
++ 2kdd]]=][
++ ENDTEST
++ 
++ class Foo : public Bar
++ {
++ public:
++ virtual void method1(void) = 0;
++ virtual void method2(int arg1,
++ int arg2,
++ int arg3) = 0;
++ };
++ 
++ STARTTEST
+  :set cino=+20
+  2kdd]]=][
+  ENDTEST
+*** ../vim-7.3.331/src/testdir/test3.ok	2011-07-20 15:09:38.000000000 +0200
+--- src/testdir/test3.ok	2011-10-04 17:47:25.000000000 +0200
+***************
+*** 1190,1195 ****
+--- 1190,1205 ----
+  };
+  
+  
++ class Foo : public Bar
++ {
++ 	public:
++ 		virtual void method1(void) = 0;
++ 		virtual void method2(int arg1,
++ 							 int arg2,
++ 							 int arg3) = 0;
++ };
++ 
++ 
+  	void
+  foo()
+  {
+*** ../vim-7.3.331/src/version.c	2011-10-04 17:00:13.000000000 +0200
+--- src/version.c	2011-10-04 18:02:17.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     332,
+  /**/
+
+-- 
+Latest survey shows that 3 out of 4 people make up 75% of the
+world's population.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.333 b/source/ap/vim/patches/7.3.333
new file mode 100644
index 00000000..974b0cda
--- /dev/null
+++ b/source/ap/vim/patches/7.3.333
@@ -0,0 +1,245 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.333
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.333
+Problem:    Using "." to repeat a Visual delete counts the size in bytes, not
+	    characters.  (Connor Lane Smith)
+Solution:   Store the virtual column numbers instead of byte positions.
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.332/src/normal.c	2011-07-15 17:51:30.000000000 +0200
+--- src/normal.c	2011-10-04 19:47:14.000000000 +0200
+***************
+*** 20,26 ****
+   */
+  static int	resel_VIsual_mode = NUL;	/* 'v', 'V', or Ctrl-V */
+  static linenr_T	resel_VIsual_line_count;	/* number of lines */
+! static colnr_T	resel_VIsual_col;		/* nr of cols or end col */
+  
+  static int	restart_VIsual_select = 0;
+  #endif
+--- 20,26 ----
+   */
+  static int	resel_VIsual_mode = NUL;	/* 'v', 'V', or Ctrl-V */
+  static linenr_T	resel_VIsual_line_count;	/* number of lines */
+! static colnr_T	resel_VIsual_vcol;		/* nr of cols or end col */
+  
+  static int	restart_VIsual_select = 0;
+  #endif
+***************
+*** 1436,1442 ****
+      /* The visual area is remembered for redo */
+      static int	    redo_VIsual_mode = NUL; /* 'v', 'V', or Ctrl-V */
+      static linenr_T redo_VIsual_line_count; /* number of lines */
+!     static colnr_T  redo_VIsual_col;	    /* number of cols or end column */
+      static long	    redo_VIsual_count;	    /* count for Visual operator */
+  # ifdef FEAT_VIRTUALEDIT
+      int		    include_line_break = FALSE;
+--- 1436,1442 ----
+      /* The visual area is remembered for redo */
+      static int	    redo_VIsual_mode = NUL; /* 'v', 'V', or Ctrl-V */
+      static linenr_T redo_VIsual_line_count; /* number of lines */
+!     static colnr_T  redo_VIsual_vcol;	    /* number of cols or end column */
+      static long	    redo_VIsual_count;	    /* count for Visual operator */
+  # ifdef FEAT_VIRTUALEDIT
+      int		    include_line_break = FALSE;
+***************
+*** 1549,1570 ****
+  #ifdef FEAT_VISUAL
+  	if (redo_VIsual_busy)
+  	{
+  	    oap->start = curwin->w_cursor;
+  	    curwin->w_cursor.lnum += redo_VIsual_line_count - 1;
+  	    if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
+  		curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
+  	    VIsual_mode = redo_VIsual_mode;
+! 	    if (VIsual_mode == 'v')
+  	    {
+! 		if (redo_VIsual_line_count <= 1)
+! 		    curwin->w_cursor.col += redo_VIsual_col - 1;
+  		else
+! 		    curwin->w_cursor.col = redo_VIsual_col;
+! 	    }
+! 	    if (redo_VIsual_col == MAXCOL)
+! 	    {
+! 		curwin->w_curswant = MAXCOL;
+! 		coladvance((colnr_T)MAXCOL);
+  	    }
+  	    cap->count0 = redo_VIsual_count;
+  	    if (redo_VIsual_count != 0)
+--- 1549,1579 ----
+  #ifdef FEAT_VISUAL
+  	if (redo_VIsual_busy)
+  	{
++ 	    /* Redo of an operation on a Visual area. Use the same size from
++ 	     * redo_VIsual_line_count and redo_VIsual_vcol. */
+  	    oap->start = curwin->w_cursor;
+  	    curwin->w_cursor.lnum += redo_VIsual_line_count - 1;
+  	    if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
+  		curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
+  	    VIsual_mode = redo_VIsual_mode;
+! 	    if (redo_VIsual_vcol == MAXCOL || VIsual_mode == 'v')
+  	    {
+! 		if (VIsual_mode == 'v')
+! 		{
+! 		    if (redo_VIsual_line_count <= 1)
+! 		    {
+! 			validate_virtcol();
+! 			curwin->w_curswant =
+! 				     curwin->w_virtcol + redo_VIsual_vcol - 1;
+! 		    }
+! 		    else
+! 			curwin->w_curswant = redo_VIsual_vcol;
+! 		}
+  		else
+! 		{
+! 		    curwin->w_curswant = MAXCOL;
+! 		}
+! 		coladvance(curwin->w_curswant);
+  	    }
+  	    cap->count0 = redo_VIsual_count;
+  	    if (redo_VIsual_count != 0)
+***************
+*** 1710,1716 ****
+  		    }
+  		}
+  		else if (redo_VIsual_busy)
+! 		    oap->end_vcol = oap->start_vcol + redo_VIsual_col - 1;
+  		/*
+  		 * Correct oap->end.col and oap->start.col to be the
+  		 * upper-left and lower-right corner of the block area.
+--- 1719,1725 ----
+  		    }
+  		}
+  		else if (redo_VIsual_busy)
+! 		    oap->end_vcol = oap->start_vcol + redo_VIsual_vcol - 1;
+  		/*
+  		 * Correct oap->end.col and oap->start.col to be the
+  		 * upper-left and lower-right corner of the block area.
+***************
+*** 1735,1747 ****
+  		 */
+  		resel_VIsual_mode = VIsual_mode;
+  		if (curwin->w_curswant == MAXCOL)
+! 		    resel_VIsual_col = MAXCOL;
+! 		else if (VIsual_mode == Ctrl_V)
+! 		    resel_VIsual_col = oap->end_vcol - oap->start_vcol + 1;
+! 		else if (oap->line_count > 1)
+! 		    resel_VIsual_col = oap->end.col;
+  		else
+! 		    resel_VIsual_col = oap->end.col - oap->start.col + 1;
+  		resel_VIsual_line_count = oap->line_count;
+  	    }
+  
+--- 1744,1765 ----
+  		 */
+  		resel_VIsual_mode = VIsual_mode;
+  		if (curwin->w_curswant == MAXCOL)
+! 		    resel_VIsual_vcol = MAXCOL;
+  		else
+! 		{
+! 		    if (VIsual_mode != Ctrl_V)
+! 			getvvcol(curwin, &(oap->end),
+! 						  NULL, NULL, &oap->end_vcol);
+! 		    if (VIsual_mode == Ctrl_V || oap->line_count <= 1)
+! 		    {
+! 			if (VIsual_mode != Ctrl_V)
+! 			    getvvcol(curwin, &(oap->start),
+! 						&oap->start_vcol, NULL, NULL);
+! 			resel_VIsual_vcol = oap->end_vcol - oap->start_vcol + 1;
+! 		    }
+! 		    else
+! 			resel_VIsual_vcol = oap->end_vcol;
+! 		}
+  		resel_VIsual_line_count = oap->line_count;
+  	    }
+  
+***************
+*** 1769,1775 ****
+  		if (!redo_VIsual_busy)
+  		{
+  		    redo_VIsual_mode = resel_VIsual_mode;
+! 		    redo_VIsual_col = resel_VIsual_col;
+  		    redo_VIsual_line_count = resel_VIsual_line_count;
+  		    redo_VIsual_count = cap->count0;
+  		}
+--- 1787,1793 ----
+  		if (!redo_VIsual_busy)
+  		{
+  		    redo_VIsual_mode = resel_VIsual_mode;
+! 		    redo_VIsual_vcol = resel_VIsual_vcol;
+  		    redo_VIsual_line_count = resel_VIsual_line_count;
+  		    redo_VIsual_count = cap->count0;
+  		}
+***************
+*** 7631,7642 ****
+  	    if (VIsual_mode == 'v')
+  	    {
+  		if (resel_VIsual_line_count <= 1)
+! 		    curwin->w_cursor.col += resel_VIsual_col * cap->count0 - 1;
+  		else
+! 		    curwin->w_cursor.col = resel_VIsual_col;
+! 		check_cursor_col();
+  	    }
+! 	    if (resel_VIsual_col == MAXCOL)
+  	    {
+  		curwin->w_curswant = MAXCOL;
+  		coladvance((colnr_T)MAXCOL);
+--- 7649,7664 ----
+  	    if (VIsual_mode == 'v')
+  	    {
+  		if (resel_VIsual_line_count <= 1)
+! 		{
+! 		    validate_virtcol();
+! 		    curwin->w_curswant = curwin->w_virtcol
+! 					+ resel_VIsual_vcol * cap->count0 - 1;
+! 		}
+  		else
+! 		    curwin->w_curswant = resel_VIsual_vcol;
+! 		coladvance(curwin->w_curswant);
+  	    }
+! 	    if (resel_VIsual_vcol == MAXCOL)
+  	    {
+  		curwin->w_curswant = MAXCOL;
+  		coladvance((colnr_T)MAXCOL);
+***************
+*** 7645,7651 ****
+  	    {
+  		validate_virtcol();
+  		curwin->w_curswant = curwin->w_virtcol
+! 					 + resel_VIsual_col * cap->count0 - 1;
+  		coladvance(curwin->w_curswant);
+  	    }
+  	    else
+--- 7667,7673 ----
+  	    {
+  		validate_virtcol();
+  		curwin->w_curswant = curwin->w_virtcol
+! 					+ resel_VIsual_vcol * cap->count0 - 1;
+  		coladvance(curwin->w_curswant);
+  	    }
+  	    else
+*** ../vim-7.3.332/src/version.c	2011-10-04 18:03:43.000000000 +0200
+--- src/version.c	2011-10-04 21:05:44.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     333,
+  /**/
+
+-- 
+It was recently discovered that research causes cancer in rats.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.334 b/source/ap/vim/patches/7.3.334
new file mode 100644
index 00000000..85d5b16d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.334
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.334
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.334
+Problem:    Latest MingW about XSUBPP referencing itself. (Gongqian Li)
+Solution:   Rename the first use to XSUBPPTRY.
+Files:	    src/Make_ming.mak
+
+
+*** ../vim-7.3.333/src/Make_ming.mak	2011-09-30 16:56:00.000000000 +0200
+--- src/Make_ming.mak	2011-10-09 14:23:06.000000000 +0200
+***************
+*** 108,117 ****
+  # on NT, it's here:
+  PERLLIB=$(PERL)/lib
+  PERLLIBS=$(PERLLIB)/Core
+! XSUBPP=$(PERLLIB)/ExtUtils/xsubpp
+! XSUBPP_EXISTS=$(shell perl -e "print 1 unless -e '$(XSUBPP)'")
+  ifeq "$(XSUBPP_EXISTS)" ""
+! XSUBPP=perl $(XSUBPP)
+  else
+  XSUBPP=xsubpp
+  endif
+--- 108,117 ----
+  # on NT, it's here:
+  PERLLIB=$(PERL)/lib
+  PERLLIBS=$(PERLLIB)/Core
+! XSUBPPTRY=$(PERLLIB)/ExtUtils/xsubpp
+! XSUBPP_EXISTS=$(shell perl -e "print 1 unless -e '$(XSUBPPTRY)'")
+  ifeq "$(XSUBPP_EXISTS)" ""
+! XSUBPP=perl $(XSUBPPTRY)
+  else
+  XSUBPP=xsubpp
+  endif
+*** ../vim-7.3.333/src/version.c	2011-10-04 21:22:40.000000000 +0200
+--- src/version.c	2011-10-12 14:10:20.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     334,
+  /**/
+
+-- 
+Q: Should I clean my house or work on Vim?
+A: Whatever contains more bugs.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.335 b/source/ap/vim/patches/7.3.335
new file mode 100644
index 00000000..dc1cc560
--- /dev/null
+++ b/source/ap/vim/patches/7.3.335
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.335
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.335
+Problem:    When 'imdisable' is reset from an autocommand in Insert mode it
+	    doesn't take effect.
+Solution:   Call im_set_active() in Insert mode. (Taro Muraoka)
+Files:	    src/option.c
+
+
+*** ../vim-7.3.334/src/option.c	2011-09-21 13:40:13.000000000 +0200
+--- src/option.c	2011-10-12 14:09:46.000000000 +0200
+***************
+*** 7806,7811 ****
+--- 7806,7815 ----
+  	/* Only de-activate it here, it will be enabled when changing mode. */
+  	if (p_imdisable)
+  	    im_set_active(FALSE);
++ 	else if (State & INSERT)
++ 	    /* When the option is set from an autocommand, it may need to take
++ 	     * effect right away. */
++ 	    im_set_active(curbuf->b_p_iminsert == B_IMODE_IM);
+      }
+  #endif
+  
+*** ../vim-7.3.334/src/version.c	2011-10-12 14:11:43.000000000 +0200
+--- src/version.c	2011-10-12 16:56:30.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     335,
+  /**/
+
+-- 
+Time is money.  Especially if you make clocks.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.336 b/source/ap/vim/patches/7.3.336
new file mode 100644
index 00000000..902f578c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.336
@@ -0,0 +1,1100 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.336
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.336
+Problem:    When a tags file specifies an encoding different from 'enc' it
+	    may hang and using a pattern doesn't work.
+Solution:   Convert the whole line.  Continue reading the header after the
+	    SORT tag.  Add test83. (Yukihiro Nakadaira)
+Files:	    src/tag.c, src/testdir/Make_amiga.mak, src/testdir/Make_dos.mak,
+	    src/testdir/Make_ming.mak, src/testdir/Make_os2.mak,
+	    src/testdir/Make_vms.mms, src/testdir/Makefile,
+	    src/testdir/test83-tags2, src/testdir/test83-tags3,
+	    src/testdir/test83.in, src/testdir/test83.ok
+
+
+*** ../vim-7.3.335/src/tag.c	2011-04-11 21:35:03.000000000 +0200
+--- src/tag.c	2011-10-12 19:51:04.000000000 +0200
+***************
+*** 1277,1282 ****
+--- 1277,1283 ----
+  {
+      FILE       *fp;
+      char_u     *lbuf;			/* line buffer */
++     int		lbuf_size = LSIZE;	/* length of lbuf */
+      char_u     *tag_fname;		/* name of tag file */
+      tagname_T	tn;			/* info for get_tagfname() */
+      int		first_file;		/* trying first tag file */
+***************
+*** 1291,1296 ****
+--- 1292,1298 ----
+      char_u	*s;
+      int		i;
+  #ifdef FEAT_TAG_BINS
++     int		tag_file_sorted = NUL;	/* !_TAG_FILE_SORTED value */
+      struct tag_search_info	/* Binary search file offsets */
+      {
+  	off_t	low_offset;	/* offset for first char of first line that
+***************
+*** 1360,1372 ****
+      char_u	*saved_pat = NULL;		/* copy of pat[] */
+  #endif
+  
+-     /* Use two sets of variables for the pattern: "orgpat" holds the values
+-      * for the original pattern and "convpat" converted from 'encoding' to
+-      * encoding of the tags file.  "pats" point to either one of these. */
+-     pat_T	*pats;
+      pat_T	orgpat;			/* holds unconverted pattern info */
+  #ifdef FEAT_MBYTE
+-     pat_T	convpat;		/* holds converted pattern info */
+      vimconv_T	vimconv;
+  #endif
+  
+--- 1362,1369 ----
+***************
+*** 1390,1396 ****
+  
+      help_save = curbuf->b_help;
+      orgpat.pat = pat;
+-     pats = &orgpat;
+  #ifdef FEAT_MBYTE
+      vimconv.vc_type = CONV_NONE;
+  #endif
+--- 1387,1392 ----
+***************
+*** 1398,1404 ****
+  /*
+   * Allocate memory for the buffers that are used
+   */
+!     lbuf = alloc(LSIZE);
+      tag_fname = alloc(MAXPATHL + 1);
+  #ifdef FEAT_EMACS_TAGS
+      ebuf = alloc(LSIZE);
+--- 1394,1400 ----
+  /*
+   * Allocate memory for the buffers that are used
+   */
+!     lbuf = alloc(lbuf_size);
+      tag_fname = alloc(MAXPATHL + 1);
+  #ifdef FEAT_EMACS_TAGS
+      ebuf = alloc(LSIZE);
+***************
+*** 1424,1453 ****
+      if (help_only)				/* want tags from help file */
+  	curbuf->b_help = TRUE;			/* will be restored later */
+  
+!     pats->len = (int)STRLEN(pat);
+  #ifdef FEAT_MULTI_LANG
+      if (curbuf->b_help)
+      {
+  	/* When "@ab" is specified use only the "ab" language, otherwise
+  	 * search all languages. */
+! 	if (pats->len > 3 && pat[pats->len - 3] == '@'
+! 					  && ASCII_ISALPHA(pat[pats->len - 2])
+! 					 && ASCII_ISALPHA(pat[pats->len - 1]))
+  	{
+! 	    saved_pat = vim_strnsave(pat, pats->len - 3);
+  	    if (saved_pat != NULL)
+  	    {
+! 		help_lang_find = &pat[pats->len - 2];
+! 		pats->pat = saved_pat;
+! 		pats->len -= 3;
+  	    }
+  	}
+      }
+  #endif
+!     if (p_tl != 0 && pats->len > p_tl)		/* adjust for 'taglength' */
+! 	pats->len = p_tl;
+  
+!     prepare_pats(pats, has_re);
+  
+  #ifdef FEAT_TAG_BINS
+      /* This is only to avoid a compiler warning for using search_info
+--- 1420,1449 ----
+      if (help_only)				/* want tags from help file */
+  	curbuf->b_help = TRUE;			/* will be restored later */
+  
+!     orgpat.len = (int)STRLEN(pat);
+  #ifdef FEAT_MULTI_LANG
+      if (curbuf->b_help)
+      {
+  	/* When "@ab" is specified use only the "ab" language, otherwise
+  	 * search all languages. */
+! 	if (orgpat.len > 3 && pat[orgpat.len - 3] == '@'
+! 					  && ASCII_ISALPHA(pat[orgpat.len - 2])
+! 					 && ASCII_ISALPHA(pat[orgpat.len - 1]))
+  	{
+! 	    saved_pat = vim_strnsave(pat, orgpat.len - 3);
+  	    if (saved_pat != NULL)
+  	    {
+! 		help_lang_find = &pat[orgpat.len - 2];
+! 		orgpat.pat = saved_pat;
+! 		orgpat.len -= 3;
+  	    }
+  	}
+      }
+  #endif
+!     if (p_tl != 0 && orgpat.len > p_tl)		/* adjust for 'taglength' */
+! 	orgpat.len = p_tl;
+  
+!     prepare_pats(&orgpat, has_re);
+  
+  #ifdef FEAT_TAG_BINS
+      /* This is only to avoid a compiler warning for using search_info
+***************
+*** 1466,1478 ****
+       * Only ignore case when TAG_NOIC not used or 'ignorecase' set.
+       */
+  #ifdef FEAT_TAG_BINS
+!     pats->regmatch.rm_ic = ((p_ic || !noic)
+! 				&& (findall || pats->headlen == 0 || !p_tbs));
+      for (round = 1; round <= 2; ++round)
+      {
+!       linear = (pats->headlen == 0 || !p_tbs || round == 2);
+  #else
+!       pats->regmatch.rm_ic = (p_ic || !noic);
+  #endif
+  
+        /*
+--- 1462,1474 ----
+       * Only ignore case when TAG_NOIC not used or 'ignorecase' set.
+       */
+  #ifdef FEAT_TAG_BINS
+!     orgpat.regmatch.rm_ic = ((p_ic || !noic)
+! 				&& (findall || orgpat.headlen == 0 || !p_tbs));
+      for (round = 1; round <= 2; ++round)
+      {
+!       linear = (orgpat.headlen == 0 || !p_tbs || round == 2);
+  #else
+!       orgpat.regmatch.rm_ic = (p_ic || !noic);
+  #endif
+  
+        /*
+***************
+*** 1701,1706 ****
+--- 1697,1732 ----
+  	    }
+  line_read_in:
+  
++ #ifdef FEAT_MBYTE
++ 	    if (vimconv.vc_type != CONV_NONE)
++ 	    {
++ 		char_u	*conv_line;
++ 		int	len;
++ 
++ 		/* Convert every line.  Converting the pattern from 'enc' to
++ 		 * the tags file encoding doesn't work, because characters are
++ 		 * not recognized. */
++ 		conv_line = string_convert(&vimconv, lbuf, NULL);
++ 		if (conv_line != NULL)
++ 		{
++ 		    /* Copy or swap lbuf and conv_line. */
++ 		    len = (int)STRLEN(conv_line) + 1;
++ 		    if (len > lbuf_size)
++ 		    {
++ 			vim_free(lbuf);
++ 			lbuf = conv_line;
++ 			lbuf_size = len;
++ 		    }
++ 		    else
++ 		    {
++ 			STRCPY(lbuf, conv_line);
++ 			vim_free(conv_line);
++ 		    }
++ 		}
++ 	    }
++ #endif
++ 
++ 
+  #ifdef FEAT_EMACS_TAGS
+  	    /*
+  	     * Emacs tags line with CTRL-L: New file name on next line.
+***************
+*** 1770,1775 ****
+--- 1796,1828 ----
+  	     */
+  	    if (state == TS_START)
+  	    {
++ 		if (STRNCMP(lbuf, "!_TAG_", 6) <= 0)
++ 		{
++ 		    /*
++ 		     * Read header line.
++ 		     */
++ #ifdef FEAT_TAG_BINS
++ 		    if (STRNCMP(lbuf, "!_TAG_FILE_SORTED\t", 18) == 0)
++ 			tag_file_sorted = lbuf[18];
++ #endif
++ #ifdef FEAT_MBYTE
++ 		    if (STRNCMP(lbuf, "!_TAG_FILE_ENCODING\t", 20) == 0)
++ 		    {
++ 			/* Prepare to convert every line from the specified
++ 			 * encoding to 'encoding'. */
++ 			for (p = lbuf + 20; *p > ' ' && *p < 127; ++p)
++ 			    ;
++ 			*p = NUL;
++ 			convert_setup(&vimconv, lbuf + 20, p_enc);
++ 		    }
++ #endif
++ 
++ 		    /* Read the next line.  Unrecognized flags are ignored. */
++ 		    continue;
++ 		}
++ 
++ 		/* Headers ends. */
++ 
+  #ifdef FEAT_TAG_BINS
+  		/*
+  		 * When there is no tag head, or ignoring case, need to do a
+***************
+*** 1786,1809 ****
+  		if (linear)
+  # endif
+  		    state = TS_LINEAR;
+! 		else if (STRNCMP(lbuf, "!_TAG_", 6) > 0)
+  		    state = TS_BINARY;
+! 		else if (STRNCMP(lbuf, "!_TAG_FILE_SORTED\t", 18) == 0)
+! 		{
+! 		    /* Check sorted flag */
+! 		    if (lbuf[18] == '1')
+  			state = TS_BINARY;
+! 		    else if (lbuf[18] == '2')
+! 		    {
+! 			state = TS_BINARY;
+! 			sortic = TRUE;
+! 			pats->regmatch.rm_ic = (p_ic || !noic);
+! 		    }
+! 		    else
+! 			state = TS_LINEAR;
+  		}
+  
+! 		if (state == TS_BINARY && pats->regmatch.rm_ic && !sortic)
+  		{
+  		    /* binary search won't work for ignoring case, use linear
+  		     * search. */
+--- 1839,1858 ----
+  		if (linear)
+  # endif
+  		    state = TS_LINEAR;
+! 		else if (tag_file_sorted == NUL)
+  		    state = TS_BINARY;
+! 		else if (tag_file_sorted == '1')
+  			state = TS_BINARY;
+! 		else if (tag_file_sorted == '2')
+! 		{
+! 		    state = TS_BINARY;
+! 		    sortic = TRUE;
+! 		    orgpat.regmatch.rm_ic = (p_ic || !noic);
+  		}
++ 		else
++ 		    state = TS_LINEAR;
+  
+! 		if (state == TS_BINARY && orgpat.regmatch.rm_ic && !sortic)
+  		{
+  		    /* binary search won't work for ignoring case, use linear
+  		     * search. */
+***************
+*** 1843,1882 ****
+  #endif
+  	    }
+  
+- #ifdef FEAT_MBYTE
+- 	    if (lbuf[0] == '!' && pats == &orgpat
+- 			   && STRNCMP(lbuf, "!_TAG_FILE_ENCODING\t", 20) == 0)
+- 	    {
+- 		/* Convert the search pattern from 'encoding' to the
+- 		 * specified encoding. */
+- 		for (p = lbuf + 20; *p > ' ' && *p < 127; ++p)
+- 		    ;
+- 		*p = NUL;
+- 		convert_setup(&vimconv, p_enc, lbuf + 20);
+- 		if (vimconv.vc_type != CONV_NONE)
+- 		{
+- 		    convpat.pat = string_convert(&vimconv, pats->pat, NULL);
+- 		    if (convpat.pat != NULL)
+- 		    {
+- 			pats = &convpat;
+- 			pats->len = (int)STRLEN(pats->pat);
+- 			prepare_pats(pats, has_re);
+- 			pats->regmatch.rm_ic = orgpat.regmatch.rm_ic;
+- 		    }
+- 		}
+- 
+- 		/* Prepare for converting a match the other way around. */
+- 		convert_setup(&vimconv, lbuf + 20, p_enc);
+- 		continue;
+- 	    }
+- #endif
+- 
+  	    /*
+  	     * Figure out where the different strings are in this line.
+  	     * For "normal" tags: Do a quick check if the tag matches.
+  	     * This speeds up tag searching a lot!
+  	     */
+! 	    if (pats->headlen
+  #ifdef FEAT_EMACS_TAGS
+  			    && !is_etag
+  #endif
+--- 1892,1903 ----
+  #endif
+  	    }
+  
+  	    /*
+  	     * Figure out where the different strings are in this line.
+  	     * For "normal" tags: Do a quick check if the tag matches.
+  	     * This speeds up tag searching a lot!
+  	     */
+! 	    if (orgpat.headlen
+  #ifdef FEAT_EMACS_TAGS
+  			    && !is_etag
+  #endif
+***************
+*** 1933,1941 ****
+  		cmplen = (int)(tagp.tagname_end - tagp.tagname);
+  		if (p_tl != 0 && cmplen > p_tl)	    /* adjust for 'taglength' */
+  		    cmplen = p_tl;
+! 		if (has_re && pats->headlen < cmplen)
+! 		    cmplen = pats->headlen;
+! 		else if (state == TS_LINEAR && pats->headlen != cmplen)
+  		    continue;
+  
+  #ifdef FEAT_TAG_BINS
+--- 1954,1962 ----
+  		cmplen = (int)(tagp.tagname_end - tagp.tagname);
+  		if (p_tl != 0 && cmplen > p_tl)	    /* adjust for 'taglength' */
+  		    cmplen = p_tl;
+! 		if (has_re && orgpat.headlen < cmplen)
+! 		    cmplen = orgpat.headlen;
+! 		else if (state == TS_LINEAR && orgpat.headlen != cmplen)
+  		    continue;
+  
+  #ifdef FEAT_TAG_BINS
+***************
+*** 1954,1963 ****
+  		     * Compare the current tag with the searched tag.
+  		     */
+  		    if (sortic)
+! 			tagcmp = tag_strnicmp(tagp.tagname, pats->head,
+  							      (size_t)cmplen);
+  		    else
+! 			tagcmp = STRNCMP(tagp.tagname, pats->head, cmplen);
+  
+  		    /*
+  		     * A match with a shorter tag means to search forward.
+--- 1975,1984 ----
+  		     * Compare the current tag with the searched tag.
+  		     */
+  		    if (sortic)
+! 			tagcmp = tag_strnicmp(tagp.tagname, orgpat.head,
+  							      (size_t)cmplen);
+  		    else
+! 			tagcmp = STRNCMP(tagp.tagname, orgpat.head, cmplen);
+  
+  		    /*
+  		     * A match with a shorter tag means to search forward.
+***************
+*** 1965,1973 ****
+  		     */
+  		    if (tagcmp == 0)
+  		    {
+! 			if (cmplen < pats->headlen)
+  			    tagcmp = -1;
+! 			else if (cmplen > pats->headlen)
+  			    tagcmp = 1;
+  		    }
+  
+--- 1986,1994 ----
+  		     */
+  		    if (tagcmp == 0)
+  		    {
+! 			if (cmplen < orgpat.headlen)
+  			    tagcmp = -1;
+! 			else if (cmplen > orgpat.headlen)
+  			    tagcmp = 1;
+  		    }
+  
+***************
+*** 2011,2017 ****
+  		}
+  		else if (state == TS_SKIP_BACK)
+  		{
+! 		    if (MB_STRNICMP(tagp.tagname, pats->head, cmplen) != 0)
+  			state = TS_STEP_FORWARD;
+  		    else
+  			/* Have to skip back more.  Restore the curr_offset
+--- 2032,2038 ----
+  		}
+  		else if (state == TS_SKIP_BACK)
+  		{
+! 		    if (MB_STRNICMP(tagp.tagname, orgpat.head, cmplen) != 0)
+  			state = TS_STEP_FORWARD;
+  		    else
+  			/* Have to skip back more.  Restore the curr_offset
+***************
+*** 2021,2027 ****
+  		}
+  		else if (state == TS_STEP_FORWARD)
+  		{
+! 		    if (MB_STRNICMP(tagp.tagname, pats->head, cmplen) != 0)
+  		    {
+  			if ((off_t)ftell(fp) > search_info.match_offset)
+  			    break;	/* past last match */
+--- 2042,2048 ----
+  		}
+  		else if (state == TS_STEP_FORWARD)
+  		{
+! 		    if (MB_STRNICMP(tagp.tagname, orgpat.head, cmplen) != 0)
+  		    {
+  			if ((off_t)ftell(fp) > search_info.match_offset)
+  			    break;	/* past last match */
+***************
+*** 2032,2038 ****
+  		else
+  #endif
+  		    /* skip this match if it can't match */
+! 		    if (MB_STRNICMP(tagp.tagname, pats->head, cmplen) != 0)
+  		    continue;
+  
+  		/*
+--- 2053,2059 ----
+  		else
+  #endif
+  		    /* skip this match if it can't match */
+! 		    if (MB_STRNICMP(tagp.tagname, orgpat.head, cmplen) != 0)
+  		    continue;
+  
+  		/*
+***************
+*** 2083,2123 ****
+  	    if (p_tl != 0 && cmplen > p_tl)	    /* adjust for 'taglength' */
+  		cmplen = p_tl;
+  	    /* if tag length does not match, don't try comparing */
+! 	    if (pats->len != cmplen)
+  		match = FALSE;
+  	    else
+  	    {
+! 		if (pats->regmatch.rm_ic)
+  		{
+! 		    match = (MB_STRNICMP(tagp.tagname, pats->pat, cmplen) == 0);
+  		    if (match)
+! 			match_no_ic = (STRNCMP(tagp.tagname, pats->pat,
+  								cmplen) == 0);
+  		}
+  		else
+! 		    match = (STRNCMP(tagp.tagname, pats->pat, cmplen) == 0);
+  	    }
+  
+  	    /*
+  	     * Has a regexp: Also find tags matching regexp.
+  	     */
+  	    match_re = FALSE;
+! 	    if (!match && pats->regmatch.regprog != NULL)
+  	    {
+  		int	cc;
+  
+  		cc = *tagp.tagname_end;
+  		*tagp.tagname_end = NUL;
+! 		match = vim_regexec(&pats->regmatch, tagp.tagname, (colnr_T)0);
+  		if (match)
+  		{
+! 		    matchoff = (int)(pats->regmatch.startp[0] - tagp.tagname);
+! 		    if (pats->regmatch.rm_ic)
+  		    {
+! 			pats->regmatch.rm_ic = FALSE;
+! 			match_no_ic = vim_regexec(&pats->regmatch, tagp.tagname,
+  								  (colnr_T)0);
+! 			pats->regmatch.rm_ic = TRUE;
+  		    }
+  		}
+  		*tagp.tagname_end = cc;
+--- 2104,2144 ----
+  	    if (p_tl != 0 && cmplen > p_tl)	    /* adjust for 'taglength' */
+  		cmplen = p_tl;
+  	    /* if tag length does not match, don't try comparing */
+! 	    if (orgpat.len != cmplen)
+  		match = FALSE;
+  	    else
+  	    {
+! 		if (orgpat.regmatch.rm_ic)
+  		{
+! 		    match = (MB_STRNICMP(tagp.tagname, orgpat.pat, cmplen) == 0);
+  		    if (match)
+! 			match_no_ic = (STRNCMP(tagp.tagname, orgpat.pat,
+  								cmplen) == 0);
+  		}
+  		else
+! 		    match = (STRNCMP(tagp.tagname, orgpat.pat, cmplen) == 0);
+  	    }
+  
+  	    /*
+  	     * Has a regexp: Also find tags matching regexp.
+  	     */
+  	    match_re = FALSE;
+! 	    if (!match && orgpat.regmatch.regprog != NULL)
+  	    {
+  		int	cc;
+  
+  		cc = *tagp.tagname_end;
+  		*tagp.tagname_end = NUL;
+! 		match = vim_regexec(&orgpat.regmatch, tagp.tagname, (colnr_T)0);
+  		if (match)
+  		{
+! 		    matchoff = (int)(orgpat.regmatch.startp[0] - tagp.tagname);
+! 		    if (orgpat.regmatch.rm_ic)
+  		    {
+! 			orgpat.regmatch.rm_ic = FALSE;
+! 			match_no_ic = vim_regexec(&orgpat.regmatch, tagp.tagname,
+  								  (colnr_T)0);
+! 			orgpat.regmatch.rm_ic = TRUE;
+  		    }
+  		}
+  		*tagp.tagname_end = cc;
+***************
+*** 2174,2180 ****
+  			else
+  			    mtt = MT_GL_OTH;
+  		    }
+! 		    if (pats->regmatch.rm_ic && !match_no_ic)
+  			mtt += MT_IC_OFF;
+  		    if (match_re)
+  			mtt += MT_RE_OFF;
+--- 2195,2201 ----
+  			else
+  			    mtt = MT_GL_OTH;
+  		    }
+! 		    if (orgpat.regmatch.rm_ic && !match_no_ic)
+  			mtt += MT_IC_OFF;
+  		    if (match_re)
+  			mtt += MT_RE_OFF;
+***************
+*** 2187,2221 ****
+  		 */
+  		if (ga_grow(&ga_match[mtt], 1) == OK)
+  		{
+- #ifdef FEAT_MBYTE
+- 		    char_u	*conv_line = NULL;
+- 		    char_u	*lbuf_line = lbuf;
+- 
+- 		    if (vimconv.vc_type != CONV_NONE)
+- 		    {
+- 			/* Convert the tag line from the encoding of the tags
+- 			 * file to 'encoding'.  Then parse the line again. */
+- 			conv_line = string_convert(&vimconv, lbuf, NULL);
+- 			if (conv_line != NULL)
+- 			{
+- 			    if (parse_tag_line(conv_line,
+- #ifdef FEAT_EMACS_TAGS
+- 					is_etag,
+- #endif
+- 					&tagp) == OK)
+- 				lbuf_line = conv_line;
+- 			    else
+- 				/* doesn't work, go back to unconverted line. */
+- 				(void)parse_tag_line(lbuf,
+- #ifdef FEAT_EMACS_TAGS
+- 						     is_etag,
+- #endif
+- 						     &tagp);
+- 			}
+- 		    }
+- #else
+- # define lbuf_line lbuf
+- #endif
+  		    if (help_only)
+  		    {
+  #ifdef FEAT_MULTI_LANG
+--- 2208,2213 ----
+***************
+*** 2307,2313 ****
+  			 * without Emacs tags: <mtt><tag_fname><NUL><lbuf>
+  			 */
+  			len = (int)STRLEN(tag_fname)
+! 						 + (int)STRLEN(lbuf_line) + 3;
+  #ifdef FEAT_EMACS_TAGS
+  			if (is_etag)
+  			    len += (int)STRLEN(ebuf) + 1;
+--- 2299,2305 ----
+  			 * without Emacs tags: <mtt><tag_fname><NUL><lbuf>
+  			 */
+  			len = (int)STRLEN(tag_fname)
+! 						 + (int)STRLEN(lbuf) + 3;
+  #ifdef FEAT_EMACS_TAGS
+  			if (is_etag)
+  			    len += (int)STRLEN(ebuf) + 1;
+***************
+*** 2337,2343 ****
+  			    else
+  				*s++ = NUL;
+  #endif
+! 			    STRCPY(s, lbuf_line);
+  			}
+  		    }
+  
+--- 2329,2335 ----
+  			    else
+  				*s++ = NUL;
+  #endif
+! 			    STRCPY(s, lbuf);
+  			}
+  		    }
+  
+***************
+*** 2373,2382 ****
+  			else
+  			    vim_free(mfp);
+  		    }
+- #ifdef FEAT_MBYTE
+- 		    /* Note: this makes the values in "tagp" invalid! */
+- 		    vim_free(conv_line);
+- #endif
+  		}
+  		else    /* Out of memory! Just forget about the rest. */
+  		{
+--- 2365,2370 ----
+***************
+*** 2415,2433 ****
+  	}
+  #endif
+  #ifdef FEAT_MBYTE
+- 	if (pats == &convpat)
+- 	{
+- 	    /* Go back from converted pattern to original pattern. */
+- 	    vim_free(pats->pat);
+- 	    vim_free(pats->regmatch.regprog);
+- 	    orgpat.regmatch.rm_ic = pats->regmatch.rm_ic;
+- 	    pats = &orgpat;
+- 	}
+  	if (vimconv.vc_type != CONV_NONE)
+  	    convert_setup(&vimconv, NULL, NULL);
+  #endif
+  
+  #ifdef FEAT_TAG_BINS
+  	if (sort_error)
+  	{
+  	    EMSG2(_("E432: Tags file not sorted: %s"), tag_fname);
+--- 2403,2414 ----
+  	}
+  #endif
+  #ifdef FEAT_MBYTE
+  	if (vimconv.vc_type != CONV_NONE)
+  	    convert_setup(&vimconv, NULL, NULL);
+  #endif
+  
+  #ifdef FEAT_TAG_BINS
++ 	tag_file_sorted = NUL;
+  	if (sort_error)
+  	{
+  	    EMSG2(_("E432: Tags file not sorted: %s"), tag_fname);
+***************
+*** 2461,2473 ****
+  #ifdef FEAT_TAG_BINS
+        /* stop searching when already did a linear search, or when TAG_NOIC
+         * used, and 'ignorecase' not set or already did case-ignore search */
+!       if (stop_searching || linear || (!p_ic && noic) || pats->regmatch.rm_ic)
+  	  break;
+  # ifdef FEAT_CSCOPE
+        if (use_cscope)
+  	  break;
+  # endif
+!       pats->regmatch.rm_ic = TRUE;	/* try another time while ignoring case */
+      }
+  #endif
+  
+--- 2442,2454 ----
+  #ifdef FEAT_TAG_BINS
+        /* stop searching when already did a linear search, or when TAG_NOIC
+         * used, and 'ignorecase' not set or already did case-ignore search */
+!       if (stop_searching || linear || (!p_ic && noic) || orgpat.regmatch.rm_ic)
+  	  break;
+  # ifdef FEAT_CSCOPE
+        if (use_cscope)
+  	  break;
+  # endif
+!       orgpat.regmatch.rm_ic = TRUE;	/* try another time while ignoring case */
+      }
+  #endif
+  
+***************
+*** 2480,2486 ****
+  
+  findtag_end:
+      vim_free(lbuf);
+!     vim_free(pats->regmatch.regprog);
+      vim_free(tag_fname);
+  #ifdef FEAT_EMACS_TAGS
+      vim_free(ebuf);
+--- 2461,2467 ----
+  
+  findtag_end:
+      vim_free(lbuf);
+!     vim_free(orgpat.regmatch.regprog);
+      vim_free(tag_fname);
+  #ifdef FEAT_EMACS_TAGS
+      vim_free(ebuf);
+*** ../vim-7.3.335/src/testdir/Make_amiga.mak	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Make_amiga.mak	2011-10-12 19:21:00.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out
+  
+  .SUFFIXES: .in .out
+  
+***************
+*** 131,133 ****
+--- 131,134 ----
+  test80.out: test80.in
+  test81.out: test81.in
+  test82.out: test82.in
++ test83.out: test83.in
+*** ../vim-7.3.335/src/testdir/Make_dos.mak	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Make_dos.mak	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 29,35 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 29,35 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.335/src/testdir/Make_ming.mak	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Make_ming.mak	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 49,55 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 49,55 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.335/src/testdir/Make_os2.mak	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Make_os2.mak	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out
+  
+  .SUFFIXES: .in .out
+  
+*** ../vim-7.3.335/src/testdir/Make_vms.mms	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Make_vms.mms	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 76,82 ****
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+  	 test77.out test78.out test79.out test80.out test81.out \
+! 	 test82.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 76,82 ----
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+  	 test77.out test78.out test79.out test80.out test81.out \
+! 	 test82.out test83.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.335/src/testdir/Makefile	2011-07-15 21:16:54.000000000 +0200
+--- src/testdir/Makefile	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 26,32 ****
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 26,32 ----
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS_GUI = test16.out
+  
+***************
+*** 72,78 ****
+  		  fi \
+  		else echo $* NO OUTPUT >>test.log; \
+  		fi"
+! 	-rm -rf X* test.ok viminfo
+  
+  test49.out: test49.vim
+  
+--- 72,78 ----
+  		  fi \
+  		else echo $* NO OUTPUT >>test.log; \
+  		fi"
+! #	-rm -rf X* test.ok viminfo
+  
+  test49.out: test49.vim
+  
+*** ../vim-7.3.335/src/testdir/test83-tags2	2011-10-12 19:49:38.000000000 +0200
+--- src/testdir/test83-tags2	2011-10-12 19:34:15.000000000 +0200
+***************
+*** 0 ****
+--- 1,2 ----
++ !_TAG_FILE_ENCODING	cp932	//
++ ‚`‚a‚b	Xtags2.txt	/‚`‚a‚b
+*** ../vim-7.3.335/src/testdir/test83-tags3	2011-10-12 19:49:38.000000000 +0200
+--- src/testdir/test83-tags3	2011-10-12 19:35:42.000000000 +0200
+***************
+*** 0 ****
+--- 1,102 ----
++ !_TAG_FILE_SORTED	1	//
++ !_TAG_FILE_ENCODING	cp932	//
++ abc1	Xtags3.txt	/‚`‚a‚b
++ abc2	Xtags3.txt	/‚`‚a‚b
++ abc3	Xtags3.txt	/‚`‚a‚b
++ abc4	Xtags3.txt	/‚`‚a‚b
++ abc5	Xtags3.txt	/‚`‚a‚b
++ abc6	Xtags3.txt	/‚`‚a‚b
++ abc7	Xtags3.txt	/‚`‚a‚b
++ abc8	Xtags3.txt	/‚`‚a‚b
++ abc9	Xtags3.txt	/‚`‚a‚b
++ abc10	Xtags3.txt	/‚`‚a‚b
++ abc11	Xtags3.txt	/‚`‚a‚b
++ abc12	Xtags3.txt	/‚`‚a‚b
++ abc13	Xtags3.txt	/‚`‚a‚b
++ abc14	Xtags3.txt	/‚`‚a‚b
++ abc15	Xtags3.txt	/‚`‚a‚b
++ abc16	Xtags3.txt	/‚`‚a‚b
++ abc17	Xtags3.txt	/‚`‚a‚b
++ abc18	Xtags3.txt	/‚`‚a‚b
++ abc19	Xtags3.txt	/‚`‚a‚b
++ abc20	Xtags3.txt	/‚`‚a‚b
++ abc21	Xtags3.txt	/‚`‚a‚b
++ abc22	Xtags3.txt	/‚`‚a‚b
++ abc23	Xtags3.txt	/‚`‚a‚b
++ abc24	Xtags3.txt	/‚`‚a‚b
++ abc25	Xtags3.txt	/‚`‚a‚b
++ abc26	Xtags3.txt	/‚`‚a‚b
++ abc27	Xtags3.txt	/‚`‚a‚b
++ abc28	Xtags3.txt	/‚`‚a‚b
++ abc29	Xtags3.txt	/‚`‚a‚b
++ abc30	Xtags3.txt	/‚`‚a‚b
++ abc31	Xtags3.txt	/‚`‚a‚b
++ abc32	Xtags3.txt	/‚`‚a‚b
++ abc33	Xtags3.txt	/‚`‚a‚b
++ abc34	Xtags3.txt	/‚`‚a‚b
++ abc35	Xtags3.txt	/‚`‚a‚b
++ abc36	Xtags3.txt	/‚`‚a‚b
++ abc37	Xtags3.txt	/‚`‚a‚b
++ abc38	Xtags3.txt	/‚`‚a‚b
++ abc39	Xtags3.txt	/‚`‚a‚b
++ abc40	Xtags3.txt	/‚`‚a‚b
++ abc41	Xtags3.txt	/‚`‚a‚b
++ abc42	Xtags3.txt	/‚`‚a‚b
++ abc43	Xtags3.txt	/‚`‚a‚b
++ abc44	Xtags3.txt	/‚`‚a‚b
++ abc45	Xtags3.txt	/‚`‚a‚b
++ abc46	Xtags3.txt	/‚`‚a‚b
++ abc47	Xtags3.txt	/‚`‚a‚b
++ abc48	Xtags3.txt	/‚`‚a‚b
++ abc49	Xtags3.txt	/‚`‚a‚b
++ abc50	Xtags3.txt	/‚`‚a‚b
++ abc51	Xtags3.txt	/‚`‚a‚b
++ abc52	Xtags3.txt	/‚`‚a‚b
++ abc53	Xtags3.txt	/‚`‚a‚b
++ abc54	Xtags3.txt	/‚`‚a‚b
++ abc55	Xtags3.txt	/‚`‚a‚b
++ abc56	Xtags3.txt	/‚`‚a‚b
++ abc57	Xtags3.txt	/‚`‚a‚b
++ abc58	Xtags3.txt	/‚`‚a‚b
++ abc59	Xtags3.txt	/‚`‚a‚b
++ abc60	Xtags3.txt	/‚`‚a‚b
++ abc61	Xtags3.txt	/‚`‚a‚b
++ abc62	Xtags3.txt	/‚`‚a‚b
++ abc63	Xtags3.txt	/‚`‚a‚b
++ abc64	Xtags3.txt	/‚`‚a‚b
++ abc65	Xtags3.txt	/‚`‚a‚b
++ abc66	Xtags3.txt	/‚`‚a‚b
++ abc67	Xtags3.txt	/‚`‚a‚b
++ abc68	Xtags3.txt	/‚`‚a‚b
++ abc69	Xtags3.txt	/‚`‚a‚b
++ abc70	Xtags3.txt	/‚`‚a‚b
++ abc71	Xtags3.txt	/‚`‚a‚b
++ abc72	Xtags3.txt	/‚`‚a‚b
++ abc73	Xtags3.txt	/‚`‚a‚b
++ abc74	Xtags3.txt	/‚`‚a‚b
++ abc75	Xtags3.txt	/‚`‚a‚b
++ abc76	Xtags3.txt	/‚`‚a‚b
++ abc77	Xtags3.txt	/‚`‚a‚b
++ abc78	Xtags3.txt	/‚`‚a‚b
++ abc79	Xtags3.txt	/‚`‚a‚b
++ abc80	Xtags3.txt	/‚`‚a‚b
++ abc81	Xtags3.txt	/‚`‚a‚b
++ abc82	Xtags3.txt	/‚`‚a‚b
++ abc83	Xtags3.txt	/‚`‚a‚b
++ abc84	Xtags3.txt	/‚`‚a‚b
++ abc85	Xtags3.txt	/‚`‚a‚b
++ abc86	Xtags3.txt	/‚`‚a‚b
++ abc87	Xtags3.txt	/‚`‚a‚b
++ abc88	Xtags3.txt	/‚`‚a‚b
++ abc89	Xtags3.txt	/‚`‚a‚b
++ abc90	Xtags3.txt	/‚`‚a‚b
++ abc91	Xtags3.txt	/‚`‚a‚b
++ abc92	Xtags3.txt	/‚`‚a‚b
++ abc93	Xtags3.txt	/‚`‚a‚b
++ abc94	Xtags3.txt	/‚`‚a‚b
++ abc95	Xtags3.txt	/‚`‚a‚b
++ abc96	Xtags3.txt	/‚`‚a‚b
++ abc97	Xtags3.txt	/‚`‚a‚b
++ abc98	Xtags3.txt	/‚`‚a‚b
++ abc99	Xtags3.txt	/‚`‚a‚b
++ abc100	Xtags3.txt	/‚`‚a‚b
+*** ../vim-7.3.335/src/testdir/test83.in	2011-10-12 19:49:38.000000000 +0200
+--- src/testdir/test83.in	2011-10-12 19:40:47.000000000 +0200
+***************
+*** 0 ****
+--- 1,76 ----
++ Tests for tag search with !_TAG_FILE_ENCODING.
++ 
++ STARTTEST
++ :so mbyte.vim
++ :if !has('iconv')
++ : e! test.ok
++ : w! test.out
++ : qa!
++ :endif
++ :set enc=utf8
++ 
++ :/^text for tags1$/,/^text for tags1$/+1w! Xtags1.txt
++ :/^text for tags2$/,/^text for tags2$/+1w! Xtags2.txt
++ :/^text for tags3$/,/^text for tags3$/+1w! Xtags3.txt
++ :/^tags1$/+1,/^tags1-end$/-1w! Xtags1
++ 
++ ggdG
++ 
++ :call setline('.', 'Results of test83')
++ 
++ :" case1:
++ :new
++ :set tags=Xtags1
++ :let v:errmsg = ''
++ :tag abcdefghijklmnopqrs
++ :if v:errmsg =~ 'E426:' || getline('.') != 'abcdefghijklmnopqrs'
++ : close
++ : put ='case1: failed'
++ :else
++ : close
++ : put ='case1: ok'
++ :endif
++ 
++ :" case2:
++ :new
++ :set tags=test83-tags2
++ :let v:errmsg = ''
++ :tag /.ＢＣ
++ :if v:errmsg =~ 'E426:' || getline('.') != 'ＡＢＣ'
++ : close
++ : put ='case2: failed'
++ :else
++ : close
++ : put ='case2: ok'
++ :endif
++ 
++ :" case3:
++ :new
++ :set tags=test83-tags3
++ :let v:errmsg = ''
++ :tag abc50
++ :if v:errmsg =~ 'E426:' || getline('.') != 'ＡＢＣ'
++ : close
++ : put ='case3: failed'
++ :else
++ : close
++ : put ='case3: ok'
++ :endif
++ :close
++ 
++ :wq! test.out
++ ENDTEST
++ 
++ text for tags1
++ abcdefghijklmnopqrs
++ 
++ text for tags2
++ ＡＢＣ
++ 
++ text for tags3
++ ＡＢＣ
++ 
++ tags1
++ !_TAG_FILE_ENCODING	utf-8	//
++ abcdefghijklmnopqrs	Xtags1.txt	/abcdefghijklmnopqrs
++ tags1-end
+*** ../vim-7.3.335/src/testdir/test83.ok	2011-10-12 19:49:38.000000000 +0200
+--- src/testdir/test83.ok	2011-10-12 17:39:03.000000000 +0200
+***************
+*** 0 ****
+--- 1,4 ----
++ Results of test83
++ case1: ok
++ case2: ok
++ case3: ok
+*** ../vim-7.3.335/src/version.c	2011-10-12 16:57:07.000000000 +0200
+--- src/version.c	2011-10-12 19:45:46.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     336,
+  /**/
+
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+62. If your doorbell rings, you think that new mail has arrived.  And then
+    you're disappointed that it's only someone at the door.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.337 b/source/ap/vim/patches/7.3.337
new file mode 100644
index 00000000..a2aeb04f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.337
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.337
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.337 (after 7.3.295)
+Problem:    Screen doesn't update after resizing the xterm until a character
+	    is typed.
+Solution:   When the select call is interrupted check do_resize. (Taylor
+	    Hedberg)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.336/src/os_unix.c	2011-09-08 23:24:09.000000000 +0200
+--- src/os_unix.c	2011-10-12 20:57:15.000000000 +0200
+***************
+*** 5146,5156 ****
+--- 5146,5163 ----
+  # endif
+  # ifdef EINTR
+  	if (ret == -1 && errno == EINTR)
++ 	{
++ 	    /* Check whether window has been resized, EINTR may be caused by
++ 	     * SIGWINCH. */
++ 	    if (do_resize)
++ 		handle_resize();
++ 
+  	    /* Interrupted by a signal, need to try again.  We ignore msec
+  	     * here, because we do want to check even after a timeout if
+  	     * characters are available.  Needed for reading output of an
+  	     * external command after the process has finished. */
+  	    goto select_eintr;
++ 	}
+  # endif
+  # ifdef __TANDEM
+  	if (ret == -1 && errno == ENOTSUP)
+*** ../vim-7.3.336/src/version.c	2011-10-12 19:53:31.000000000 +0200
+--- src/version.c	2011-10-12 21:03:47.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     337,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+64. The remote to the T.V. is missing...and you don't even care.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.338 b/source/ap/vim/patches/7.3.338
new file mode 100644
index 00000000..f273212a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.338
@@ -0,0 +1,100 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.338
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.338
+Problem:    Using getchar() in an expression mapping doesn't work well.
+Solution:   Don't save and restore the typeahead. (James Vega)
+Files:	    src/getchar.c, src/testdir/test34.ok
+
+
+*** ../vim-7.3.337/src/getchar.c	2011-08-17 20:33:18.000000000 +0200
+--- src/getchar.c	2011-10-12 21:53:27.000000000 +0200
+***************
+*** 2460,2486 ****
+  
+  			/*
+  			 * Handle ":map <expr>": evaluate the {rhs} as an
+! 			 * expression.  Save and restore the typeahead so that
+! 			 * getchar() can be used.  Also save and restore the
+! 			 * command line for "normal :".
+  			 */
+  			if (mp->m_expr)
+  			{
+- 			    tasave_T	tabuf;
+  			    int		save_vgetc_busy = vgetc_busy;
+  
+! 			    save_typeahead(&tabuf);
+! 			    if (tabuf.typebuf_valid)
+! 			    {
+! 				vgetc_busy = 0;
+! 				save_m_keys = vim_strsave(mp->m_keys);
+! 				save_m_str = vim_strsave(mp->m_str);
+! 				s = eval_map_expr(save_m_str, NUL);
+! 				vgetc_busy = save_vgetc_busy;
+! 			    }
+! 			    else
+! 				s = NULL;
+! 			    restore_typeahead(&tabuf);
+  			}
+  			else
+  #endif
+--- 2460,2477 ----
+  
+  			/*
+  			 * Handle ":map <expr>": evaluate the {rhs} as an
+! 			 * expression.  Also save and restore the command line
+! 			 * for "normal :".
+  			 */
+  			if (mp->m_expr)
+  			{
+  			    int		save_vgetc_busy = vgetc_busy;
+  
+! 			    vgetc_busy = 0;
+! 			    save_m_keys = vim_strsave(mp->m_keys);
+! 			    save_m_str = vim_strsave(mp->m_str);
+! 			    s = eval_map_expr(save_m_str, NUL);
+! 			    vgetc_busy = save_vgetc_busy;
+  			}
+  			else
+  #endif
+*** ../vim-7.3.337/src/testdir/test34.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test34.ok	2011-10-12 21:59:39.000000000 +0200
+***************
+*** 1,5 ****
+  xxx4asdf fail nop ok 9 333
+! XX111XX
+  ---222---
+  1. one
+  2. two
+--- 1,5 ----
+  xxx4asdf fail nop ok 9 333
+! XX111-XX
+  ---222---
+  1. one
+  2. two
+*** ../vim-7.3.337/src/version.c	2011-10-12 21:04:15.000000000 +0200
+--- src/version.c	2011-10-12 21:20:31.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     338,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+65. The last time you looked at the clock it was 11:30pm, and in what
+    seems like only a few seconds later, your sister runs past you to
+    catch her 7am school bus.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.339 b/source/ap/vim/patches/7.3.339
new file mode 100644
index 00000000..f108ad6e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.339
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.339
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.339
+Problem:    "make shadow" doesn't link all test files.
+Solution:   Add a line in Makefile and Filelist.
+Files:	    src/Makefile, Filelist
+
+
+*** ../vim-7.3.338/Filelist	2011-09-30 16:56:00.000000000 +0200
+--- Filelist	2011-10-16 14:00:42.000000000 +0200
+***************
+*** 81,86 ****
+--- 81,87 ----
+  		src/testdir/test[0-9]*.ok \
+  		src/testdir/test49.vim \
+  		src/testdir/test60.vim \
++ 		src/testdir/test83-tags? \
+  		src/proto.h \
+  		src/proto/blowfish.pro \
+  		src/proto/buffer.pro \
+*** ../vim-7.3.338/src/Makefile	2011-05-19 13:40:47.000000000 +0200
+--- src/Makefile	2011-10-16 13:59:40.000000000 +0200
+***************
+*** 2328,2333 ****
+--- 2328,2334 ----
+  				 ../../testdir/vimrc.unix \
+  				 ../../testdir/*.in \
+  				 ../../testdir/*.vim \
++ 				 ../../testdir/test83-tags? \
+  				 ../../testdir/*.ok .
+  
+  # Link needed for doing "make install" in a shadow directory.
+*** ../vim-7.3.338/src/version.c	2011-10-12 22:02:07.000000000 +0200
+--- src/version.c	2011-10-20 16:34:28.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     339,
+  /**/
+
+-- 
+From "know your smileys":
+ :-O>-o   Smiley American tourist (note big mouth and camera)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.340 b/source/ap/vim/patches/7.3.340
new file mode 100644
index 00000000..fb0b8423
--- /dev/null
+++ b/source/ap/vim/patches/7.3.340
@@ -0,0 +1,62 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.340
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.340
+Problem:    When 'verbosefile' is set ftplugof.vim can give an error.
+Solution:   Only remove filetypeplugin autocommands when they exist. (Yasuhiro
+	    Matsumoto)
+Files:	    runtime/ftplugof.vim
+
+
+*** ../vim-7.3.339/runtime/ftplugof.vim	2010-08-15 21:57:11.000000000 +0200
+--- runtime/ftplugof.vim	2011-10-20 16:51:00.000000000 +0200
+***************
+*** 1,11 ****
+  " Vim support file to switch off loading plugins for file types
+  "
+  " Maintainer:	Bram Moolenaar <Bram@vim.org>
+! " Last Change:	2002 Apr 04
+  
+  if exists("did_load_ftplugin")
+    unlet did_load_ftplugin
+  endif
+  
+! " Remove all autocommands in the filetypeplugin group
+! silent! au! filetypeplugin *
+--- 1,13 ----
+  " Vim support file to switch off loading plugins for file types
+  "
+  " Maintainer:	Bram Moolenaar <Bram@vim.org>
+! " Last Change:	2011 Oct 20
+  
+  if exists("did_load_ftplugin")
+    unlet did_load_ftplugin
+  endif
+  
+! " Remove all autocommands in the filetypeplugin group, if any exist.
+! if exists("#filetypeplugin")
+!   silent! au! filetypeplugin *
+! endif
+*** ../vim-7.3.339/src/version.c	2011-10-20 16:35:25.000000000 +0200
+--- src/version.c	2011-10-20 18:01:18.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     340,
+  /**/
+
+-- 
+How many light bulbs does it take to change a person?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.341 b/source/ap/vim/patches/7.3.341
new file mode 100644
index 00000000..6ea38603
--- /dev/null
+++ b/source/ap/vim/patches/7.3.341
@@ -0,0 +1,360 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.341
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.341
+Problem:    Local help files are only listed in help.txt, not in translated
+	    help files.
+Solution:   Also find translated help files. (Yasuhiro Matsumoto)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.340/src/ex_cmds.c	2011-09-30 17:30:27.000000000 +0200
+--- src/ex_cmds.c	2011-10-20 17:39:45.000000000 +0200
+***************
+*** 5982,5987 ****
+--- 5982,5988 ----
+      char_u	*line;
+      int		in_example = FALSE;
+      int		len;
++     char_u	*fname;
+      char_u	*p;
+      char_u	*rt;
+      int		mustfree;
+***************
+*** 6028,6151 ****
+      }
+  
+      /*
+!      * In the "help.txt" file, add the locally added help files.
+!      * This uses the very first line in the help file.
+       */
+!     if (fnamecmp(gettail(curbuf->b_fname), "help.txt") == 0)
+      {
+  	for (lnum = 1; lnum < curbuf->b_ml.ml_line_count; ++lnum)
+  	{
+  	    line = ml_get_buf(curbuf, lnum, FALSE);
+! 	    if (strstr((char *)line, "*local-additions*") != NULL)
+  	    {
+! 		/* Go through all directories in 'runtimepath', skipping
+! 		 * $VIMRUNTIME. */
+! 		p = p_rtp;
+! 		while (*p != NUL)
+  		{
+! 		    copy_option_part(&p, NameBuff, MAXPATHL, ",");
+! 		    mustfree = FALSE;
+! 		    rt = vim_getenv((char_u *)"VIMRUNTIME", &mustfree);
+! 		    if (fullpathcmp(rt, NameBuff, FALSE) != FPC_SAME)
+! 		    {
+! 			int	fcount;
+! 			char_u	**fnames;
+! 			FILE	*fd;
+! 			char_u	*s;
+! 			int	fi;
+  #ifdef FEAT_MBYTE
+! 			vimconv_T	vc;
+! 			char_u		*cp;
+  #endif
+  
+! 			/* Find all "doc/ *.txt" files in this directory. */
+! 			add_pathsep(NameBuff);
+! 			STRCAT(NameBuff, "doc/*.txt");
+! 			if (gen_expand_wildcards(1, &NameBuff, &fcount,
+! 					     &fnames, EW_FILE|EW_SILENT) == OK
+! 				&& fcount > 0)
+  			{
+! 			    for (fi = 0; fi < fcount; ++fi)
+  			    {
+! 				fd = mch_fopen((char *)fnames[fi], "r");
+! 				if (fd != NULL)
+  				{
+! 				    vim_fgets(IObuff, IOSIZE, fd);
+! 				    if (IObuff[0] == '*'
+! 					    && (s = vim_strchr(IObuff + 1, '*'))
+! 								      != NULL)
+! 				    {
+! #ifdef FEAT_MBYTE
+! 					int	this_utf = MAYBE;
+  #endif
+! 					/* Change tag definition to a
+! 					 * reference and remove <CR>/<NL>. */
+! 					IObuff[0] = '|';
+! 					*s = '|';
+! 					while (*s != NUL)
+! 					{
+! 					    if (*s == '\r' || *s == '\n')
+! 						*s = NUL;
+  #ifdef FEAT_MBYTE
+! 					    /* The text is utf-8 when a byte
+! 					     * above 127 is found and no
+! 					     * illegal byte sequence is found.
+! 					     */
+! 					    if (*s >= 0x80 && this_utf != FALSE)
+! 					    {
+! 						int	l;
+! 
+! 						this_utf = TRUE;
+! 						l = utf_ptr2len(s);
+! 						if (l == 1)
+! 						    this_utf = FALSE;
+! 						s += l - 1;
+! 					    }
+  #endif
+! 					    ++s;
+! 					}
+  #ifdef FEAT_MBYTE
+! 					/* The help file is latin1 or utf-8;
+! 					 * conversion to the current
+! 					 * 'encoding' may be required. */
+! 					vc.vc_type = CONV_NONE;
+! 					convert_setup(&vc, (char_u *)(
+! 						    this_utf == TRUE ? "utf-8"
+! 							  : "latin1"), p_enc);
+! 					if (vc.vc_type == CONV_NONE)
+! 					    /* No conversion needed. */
+! 					    cp = IObuff;
+! 					else
+  					{
+! 					    /* Do the conversion.  If it fails
+! 					     * use the unconverted text. */
+! 					    cp = string_convert(&vc, IObuff,
+! 									NULL);
+! 					    if (cp == NULL)
+! 						cp = IObuff;
+  					}
+! 					convert_setup(&vc, NULL, NULL);
+  
+! 					ml_append(lnum, cp, (colnr_T)0, FALSE);
+! 					if (cp != IObuff)
+! 					    vim_free(cp);
+  #else
+! 					ml_append(lnum, IObuff, (colnr_T)0,
+! 								       FALSE);
+  #endif
+! 					++lnum;
+! 				    }
+! 				    fclose(fd);
+  				}
+  			    }
+- 			    FreeWild(fcount, fnames);
+  			}
+  		    }
+- 		    if (mustfree)
+- 			vim_free(rt);
+  		}
+! 		break;
+  	    }
+  	}
+      }
+  }
+--- 6029,6215 ----
+      }
+  
+      /*
+!      * In the "help.txt" and "help.abx" file, add the locally added help
+!      * files.  This uses the very first line in the help file.
+       */
+!     fname = gettail(curbuf->b_fname);
+!     if (fnamecmp(fname, "help.txt") == 0
+! #ifdef FEAT_MULTI_LANG
+! 	|| (fnamencmp(fname, "help.", 5) == 0
+! 	    && ASCII_ISALPHA(fname[5])
+! 	    && ASCII_ISALPHA(fname[6])
+! 	    && TOLOWER_ASC(fname[7]) == 'x'
+! 	    && fname[8] == NUL)
+! #endif
+! 	)
+      {
+  	for (lnum = 1; lnum < curbuf->b_ml.ml_line_count; ++lnum)
+  	{
+  	    line = ml_get_buf(curbuf, lnum, FALSE);
+! 	    if (strstr((char *)line, "*local-additions*") == NULL)
+! 		continue;
+! 
+! 	    /* Go through all directories in 'runtimepath', skipping
+! 	     * $VIMRUNTIME. */
+! 	    p = p_rtp;
+! 	    while (*p != NUL)
+  	    {
+! 		copy_option_part(&p, NameBuff, MAXPATHL, ",");
+! 		mustfree = FALSE;
+! 		rt = vim_getenv((char_u *)"VIMRUNTIME", &mustfree);
+! 		if (fullpathcmp(rt, NameBuff, FALSE) != FPC_SAME)
+  		{
+! 		    int		fcount;
+! 		    char_u	**fnames;
+! 		    FILE	*fd;
+! 		    char_u	*s;
+! 		    int		fi;
+  #ifdef FEAT_MBYTE
+! 		    vimconv_T	vc;
+! 		    char_u	*cp;
+  #endif
+  
+! 		    /* Find all "doc/ *.txt" files in this directory. */
+! 		    add_pathsep(NameBuff);
+! #ifdef FEAT_MULTI_LANG
+! 		    STRCAT(NameBuff, "doc/*.??[tx]");
+! #else
+! 		    STRCAT(NameBuff, "doc/*.txt");
+! #endif
+! 		    if (gen_expand_wildcards(1, &NameBuff, &fcount,
+! 					 &fnames, EW_FILE|EW_SILENT) == OK
+! 			    && fcount > 0)
+! 		    {
+! #ifdef FEAT_MULTI_LANG
+! 			int	i1;
+! 			int	i2;
+! 			char_u	*f1;
+! 			char_u	*f2;
+! 			char_u	*t1;
+! 			char_u	*e1;
+! 			char_u	*e2;
+! 
+! 			/* If foo.abx is found use it instead of foo.txt in
+! 			 * the same directory. */
+! 			for (i1 = 0; i1 < fcount; ++i1)
+  			{
+! 			    for (i2 = 0; i2 < fcount; ++i2)
+  			    {
+! 				if (i1 == i2)
+! 				    continue;
+! 				if (fnames[i1] == NULL || fnames[i2] == NULL)
+! 				    continue;
+! 				f1 = fnames[i1];
+! 				f2 = fnames[i2];
+! 				t1 = gettail(f1);
+! 				if (fnamencmp(f1, f2, t1 - f1) != 0)
+! 				    continue;
+! 				e1 = vim_strrchr(t1, '.');
+! 				e2 = vim_strrchr(gettail(f2), '.');
+! 				if (e1 == NUL || e2 == NUL)
+! 				    continue;
+! 				if (fnamecmp(e1, ".txt") != 0
+! 				    && fnamecmp(e1, fname + 4) != 0)
+  				{
+! 				    /* Not .txt and not .abx, remove it. */
+! 				    vim_free(fnames[i1]);
+! 				    fnames[i1] = NULL;
+! 				    continue;
+! 				}
+! 				if (fnamencmp(f1, f2, e1 - f1) != 0)
+! 				    continue;
+! 				if (fnamecmp(e1, ".txt") == 0
+! 				    && fnamecmp(e2, fname + 4) == 0)
+! 				{
+! 				    /* use .abx instead of .txt */
+! 				    vim_free(fnames[i1]);
+! 				    fnames[i1] = NULL;
+! 				}
+! 			    }
+! 			}
+  #endif
+! 			for (fi = 0; fi < fcount; ++fi)
+! 			{
+! 			    if (fnames[fi] == NULL)
+! 				continue;
+! 			    fd = mch_fopen((char *)fnames[fi], "r");
+! 			    if (fd != NULL)
+! 			    {
+! 				vim_fgets(IObuff, IOSIZE, fd);
+! 				if (IObuff[0] == '*'
+! 					&& (s = vim_strchr(IObuff + 1, '*'))
+! 								  != NULL)
+! 				{
+  #ifdef FEAT_MBYTE
+! 				    int	this_utf = MAYBE;
+  #endif
+! 				    /* Change tag definition to a
+! 				     * reference and remove <CR>/<NL>. */
+! 				    IObuff[0] = '|';
+! 				    *s = '|';
+! 				    while (*s != NUL)
+! 				    {
+! 					if (*s == '\r' || *s == '\n')
+! 					    *s = NUL;
+  #ifdef FEAT_MBYTE
+! 					/* The text is utf-8 when a byte
+! 					 * above 127 is found and no
+! 					 * illegal byte sequence is found.
+! 					 */
+! 					if (*s >= 0x80 && this_utf != FALSE)
+  					{
+! 					    int	l;
+! 
+! 					    this_utf = TRUE;
+! 					    l = utf_ptr2len(s);
+! 					    if (l == 1)
+! 						this_utf = FALSE;
+! 					    s += l - 1;
+  					}
+! #endif
+! 					++s;
+! 				    }
+! #ifdef FEAT_MBYTE
+! 				    /* The help file is latin1 or utf-8;
+! 				     * conversion to the current
+! 				     * 'encoding' may be required. */
+! 				    vc.vc_type = CONV_NONE;
+! 				    convert_setup(&vc, (char_u *)(
+! 						this_utf == TRUE ? "utf-8"
+! 						      : "latin1"), p_enc);
+! 				    if (vc.vc_type == CONV_NONE)
+! 					/* No conversion needed. */
+! 					cp = IObuff;
+! 				    else
+! 				    {
+! 					/* Do the conversion.  If it fails
+! 					 * use the unconverted text. */
+! 					cp = string_convert(&vc, IObuff,
+! 								    NULL);
+! 					if (cp == NULL)
+! 					    cp = IObuff;
+! 				    }
+! 				    convert_setup(&vc, NULL, NULL);
+  
+! 				    ml_append(lnum, cp, (colnr_T)0, FALSE);
+! 				    if (cp != IObuff)
+! 					vim_free(cp);
+  #else
+! 				    ml_append(lnum, IObuff, (colnr_T)0,
+! 								   FALSE);
+  #endif
+! 				    ++lnum;
+  				}
++ 				fclose(fd);
+  			    }
+  			}
++ 			FreeWild(fcount, fnames);
+  		    }
+  		}
+! 		if (mustfree)
+! 		    vim_free(rt);
+  	    }
++ 	    break;
+  	}
+      }
+  }
+*** ../vim-7.3.340/src/version.c	2011-10-20 18:12:27.000000000 +0200
+--- src/version.c	2011-10-20 18:13:46.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     341,
+  /**/
+
+-- 
+From "know your smileys":
+ :-)-O	Smiling doctor with stethoscope
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.342 b/source/ap/vim/patches/7.3.342
new file mode 100644
index 00000000..2deb7e38
--- /dev/null
+++ b/source/ap/vim/patches/7.3.342
@@ -0,0 +1,93 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.342
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.342
+Problem:    Code not in Vim style.
+Solution:   Fix the style. (Elias Diem)
+Files:	    src/os_amiga.c, src/os_mac_conv.c, src/os_win16.c
+
+
+*** ../vim-7.3.341/src/os_amiga.c	2010-08-15 21:57:27.000000000 +0200
+--- src/os_amiga.c	2011-10-20 18:19:45.000000000 +0200
+***************
+*** 1022,1028 ****
+  
+      /* insure longword alignment */
+  #ifdef __amigaos4__
+!     if(!(id = AllocDosObject(DOS_INFODATA, 0)))
+  	goto out;
+  #else
+      id = (struct InfoData *)(((long)id_a + 3L) & ~3L);
+--- 1022,1028 ----
+  
+      /* insure longword alignment */
+  #ifdef __amigaos4__
+!     if (!(id = AllocDosObject(DOS_INFODATA, 0)))
+  	goto out;
+  #else
+      id = (struct InfoData *)(((long)id_a + 3L) & ~3L);
+*** ../vim-7.3.341/src/os_mac_conv.c	2011-06-13 02:03:55.000000000 +0200
+--- src/os_mac_conv.c	2011-10-20 18:19:45.000000000 +0200
+***************
+*** 77,83 ****
+  	*unconvlenp = 0;
+      cfstr = CFStringCreateWithBytes(NULL, ptr, len, from, 0);
+  
+!     if(cfstr == NULL)
+  	fprintf(stderr, "Encoding failed\n");
+      /* When conversion failed, try excluding bytes from the end, helps when
+       * there is an incomplete byte sequence.  Only do up to 6 bytes to avoid
+--- 77,83 ----
+  	*unconvlenp = 0;
+      cfstr = CFStringCreateWithBytes(NULL, ptr, len, from, 0);
+  
+!     if (cfstr == NULL)
+  	fprintf(stderr, "Encoding failed\n");
+      /* When conversion failed, try excluding bytes from the end, helps when
+       * there is an incomplete byte sequence.  Only do up to 6 bytes to avoid
+*** ../vim-7.3.341/src/os_win16.c	2010-12-17 20:23:56.000000000 +0100
+--- src/os_win16.c	2011-10-20 18:19:45.000000000 +0200
+***************
+*** 243,251 ****
+  	/* Wait for the command to terminate before continuing */
+  	while (GetModuleUsage((HINSTANCE)h_module) > 0 && again )
+  	{
+! 	    while( PeekMessage( &msg, NULL, 0, 0, PM_REMOVE ) && again )
+  	    {
+! 		if(msg.message == WM_QUIT)
+  
+  		{
+  		    PostQuitMessage(msg.wParam);
+--- 243,251 ----
+  	/* Wait for the command to terminate before continuing */
+  	while (GetModuleUsage((HINSTANCE)h_module) > 0 && again )
+  	{
+! 	    while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE) && again)
+  	    {
+! 		if (msg.message == WM_QUIT)
+  
+  		{
+  		    PostQuitMessage(msg.wParam);
+*** ../vim-7.3.341/src/version.c	2011-10-20 18:17:38.000000000 +0200
+--- src/version.c	2011-10-20 18:21:43.000000000 +0200
+***************
+*** 711,712 ****
+--- 711,714 ----
+  {   /* Add new patch number below this line */
++ /**/
++     342,
+  /**/
+
+-- 
+You are only young once, but you can stay immature indefinitely.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.343 b/source/ap/vim/patches/7.3.343
new file mode 100644
index 00000000..db62264d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.343
@@ -0,0 +1,252 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.343
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.343
+Problem:    No mouse support for urxvt.
+Solution:   Implement urxvt mouse support, also for > 252 columns.  (Yiding
+	    Jia)
+Files:	    src/feature.h, src/keymap.h, src/option.h, src/os_unix.c,
+	    src/term.c, src/version.c
+
+
+*** ../vim-7.3.342/src/feature.h	2011-05-19 13:40:47.000000000 +0200
+--- src/feature.h	2011-10-20 21:02:15.000000000 +0200
+***************
+*** 1053,1058 ****
+--- 1053,1061 ----
+  # ifdef FEAT_BIG
+  #  define FEAT_MOUSE_DEC
+  # endif
++ # ifdef FEAT_BIG
++ #  define FEAT_MOUSE_URXVT
++ # endif
+  # if defined(FEAT_NORMAL) && (defined(MSDOS) || defined(WIN3264))
+  #  define DOS_MOUSE
+  # endif
+***************
+*** 1068,1080 ****
+  #if defined(FEAT_NORMAL) && defined(HAVE_SYSMOUSE)
+  # define FEAT_SYSMOUSE
+  #endif
+  /* Define FEAT_MOUSE when any of the above is defined or FEAT_GUI. */
+  #if !defined(FEAT_MOUSE_TTY) \
+  	&& (defined(FEAT_MOUSE_XTERM) \
+! 	    || defined(FEAT_MOUSE_NET) || defined(FEAT_MOUSE_DEC) \
+! 	    || defined(DOS_MOUSE) || defined(FEAT_MOUSE_GPM) \
+! 	    || defined(FEAT_MOUSE_JSB) || defined(FEAT_MOUSE_PTERM) \
+! 	    || defined(FEAT_SYSMOUSE))
+  # define FEAT_MOUSE_TTY		/* include non-GUI mouse support */
+  #endif
+  #if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI))
+--- 1071,1093 ----
+  #if defined(FEAT_NORMAL) && defined(HAVE_SYSMOUSE)
+  # define FEAT_SYSMOUSE
+  #endif
++ 
++ /* urxvt is a small variation of mouse_xterm, and shares its code */
++ #if defined(FEAT_MOUSE_URXVT) && !defined(FEAT_MOUSE_XTERM)
++ # define FEAT_MOUSE_XTERM
++ #endif
++ 
+  /* Define FEAT_MOUSE when any of the above is defined or FEAT_GUI. */
+  #if !defined(FEAT_MOUSE_TTY) \
+  	&& (defined(FEAT_MOUSE_XTERM) \
+! 	    || defined(FEAT_MOUSE_NET) \
+! 	    || defined(FEAT_MOUSE_DEC) \
+! 	    || defined(DOS_MOUSE) \
+! 	    || defined(FEAT_MOUSE_GPM) \
+! 	    || defined(FEAT_MOUSE_JSB) \
+! 	    || defined(FEAT_MOUSE_PTERM) \
+! 	    || defined(FEAT_SYSMOUSE) \
+! 	    || defined(FEAT_MOUSE_URXVT))
+  # define FEAT_MOUSE_TTY		/* include non-GUI mouse support */
+  #endif
+  #if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI))
+*** ../vim-7.3.342/src/keymap.h	2010-08-15 21:57:32.000000000 +0200
+--- src/keymap.h	2011-10-20 21:00:37.000000000 +0200
+***************
+*** 92,104 ****
+   */
+  #define KS_TEAROFF		244
+  
+! /* used for JSB term mouse */
+  #define KS_JSBTERM_MOUSE	243
+  
+! /* used a termcap entry that produces a normal character */
+  #define KS_KEY			242
+  
+! /* Used for the qnx pterm mouse */
+  #define KS_PTERM_MOUSE		241
+  
+  /* Used for click in a tab pages label. */
+--- 92,104 ----
+   */
+  #define KS_TEAROFF		244
+  
+! /* Used for JSB term mouse. */
+  #define KS_JSBTERM_MOUSE	243
+  
+! /* Used a termcap entry that produces a normal character. */
+  #define KS_KEY			242
+  
+! /* Used for the qnx pterm mouse. */
+  #define KS_PTERM_MOUSE		241
+  
+  /* Used for click in a tab pages label. */
+***************
+*** 107,112 ****
+--- 107,115 ----
+  /* Used for menu in a tab pages line. */
+  #define KS_TABMENU		239
+  
++ /* Used for the urxvt mouse. */
++ #define KS_URXVT_MOUSE		238
++ 
+  /*
+   * Filler used after KS_SPECIAL and others
+   */
+*** ../vim-7.3.342/src/option.h	2011-09-30 14:44:49.000000000 +0200
+--- src/option.h	2011-10-20 19:38:59.000000000 +0200
+***************
+*** 819,825 ****
+  EXTERN char_u	*p_ttym;	/* 'ttymouse' */
+  EXTERN unsigned ttym_flags;
+  # ifdef IN_OPTION_C
+! static char *(p_ttym_values[]) = {"xterm", "xterm2", "dec", "netterm", "jsbterm", "pterm", NULL};
+  # endif
+  # define TTYM_XTERM		0x01
+  # define TTYM_XTERM2		0x02
+--- 819,825 ----
+  EXTERN char_u	*p_ttym;	/* 'ttymouse' */
+  EXTERN unsigned ttym_flags;
+  # ifdef IN_OPTION_C
+! static char *(p_ttym_values[]) = {"xterm", "xterm2", "dec", "netterm", "jsbterm", "pterm", "urxvt", NULL};
+  # endif
+  # define TTYM_XTERM		0x01
+  # define TTYM_XTERM2		0x02
+***************
+*** 827,832 ****
+--- 827,833 ----
+  # define TTYM_NETTERM		0x08
+  # define TTYM_JSBTERM		0x10
+  # define TTYM_PTERM		0x20
++ # define TTYM_URXVT		0x40
+  #endif
+  EXTERN char_u	*p_udir;	/* 'undodir' */
+  EXTERN long	p_ul;		/* 'undolevels' */
+*** ../vim-7.3.342/src/os_unix.c	2011-10-12 21:04:15.000000000 +0200
+--- src/os_unix.c	2011-10-20 21:02:00.000000000 +0200
+***************
+*** 2158,2167 ****
+--- 2158,2170 ----
+   * Return non-zero when using an xterm mouse, according to 'ttymouse'.
+   * Return 1 for "xterm".
+   * Return 2 for "xterm2".
++  * Return 3 for "urxvt".
+   */
+      int
+  use_xterm_mouse()
+  {
++     if (ttym_flags == TTYM_URXVT)
++ 	return 3;
+      if (ttym_flags == TTYM_XTERM2)
+  	return 2;
+      if (ttym_flags == TTYM_XTERM)
+***************
+*** 3318,3323 ****
+--- 3321,3337 ----
+  	return;
+  
+      xterm_mouse_vers = use_xterm_mouse();
++ 
++ # ifdef FEAT_MOUSE_URXVT
++     if (ttym_flags == TTYM_URXVT) {
++ 	out_str_nf((char_u *)
++ 		   (on
++ 		   ? IF_EB("\033[?1015h", ESC_STR "[?1015h")
++ 		   : IF_EB("\033[?1015l", ESC_STR "[?1015l")));
++ 	ison = on;
++     }
++ # endif
++ 
+      if (xterm_mouse_vers > 0)
+      {
+  	if (on)	/* enable mouse events, use mouse tracking if available */
+***************
+*** 3434,3439 ****
+--- 3448,3456 ----
+  {
+  # ifdef FEAT_MOUSE_XTERM
+      if (use_xterm_mouse()
++ # ifdef FEAT_MOUSE_URXVT
++ 	    && use_xterm_mouse() != 3
++ # endif
+  #  ifdef FEAT_GUI
+  	    && !gui.in_use
+  #  endif
+***************
+*** 3523,3528 ****
+--- 3540,3566 ----
+      else
+  	del_mouse_termcode(KS_PTERM_MOUSE);
+  # endif
++ # ifdef FEAT_MOUSE_URXVT
++     /* same as the dec mouse */
++     if (use_xterm_mouse() == 3
++ #  ifdef FEAT_GUI
++ 	    && !gui.in_use
++ #  endif
++ 	    )
++     {
++ 	set_mouse_termcode(KS_URXVT_MOUSE, (char_u *)(term_is_8bit(T_NAME)
++ 		    ? IF_EB("\233", CSI_STR)
++ 		    : IF_EB("\033[", ESC_STR "[")));
++ 
++ 	if (*p_mouse != NUL)
++ 	{
++ 	    mch_setmouse(FALSE);
++ 	    setmouse();
++ 	}
++     }
++     else
++ 	del_mouse_termcode(KS_URXVT_MOUSE);
++ # endif
+  }
+  #endif
+  
+*** ../vim-7.3.342/src/version.c	2011-10-20 18:24:16.000000000 +0200
+--- src/version.c	2011-10-20 19:40:48.000000000 +0200
+***************
+*** 380,383 ****
+--- 380,388 ----
+  	"-mouse_xterm",
+  # endif
++ # ifdef FEAT_MOUSE_URXVT
++ 	"+mouse_urxvt",
++ # else
++ 	"-mouse_urxvt",
++ # endif
+  #endif
+  #ifdef __QNX__
+***************
+*** 711,712 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     343,
+  /**/
+
+-- 
+Warning label on a superhero Halloween costume:
+"Caution: Cape does not enable user to fly."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.344 b/source/ap/vim/patches/7.3.344
new file mode 100644
index 00000000..d2bb1dbe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.344
@@ -0,0 +1,121 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.344
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.344
+Problem:    Problem with GUI startup related to XInitThreads.
+Solution:   Use read() and write() instead of fputs() and fread(). (James
+	    Vega)
+Files:	    src/gui.c
+
+
+*** ../vim-7.3.343/src/gui.c	2011-09-14 19:04:35.000000000 +0200
+--- src/gui.c	2011-10-20 21:23:43.000000000 +0200
+***************
+*** 212,218 ****
+      int		status;
+      int		exit_status;
+      pid_t	pid = -1;
+-     FILE	*parent_file;
+  
+      /* Setup a pipe between the child and the parent, so that the parent
+       * knows when the child has done the setsid() call and is allowed to
+--- 212,217 ----
+***************
+*** 290,308 ****
+      gui_mch_forked();
+  # endif
+  
+-     if (!pipe_error)
+- 	parent_file = fdopen(pipefd[1], "w");
+-     else
+- 	parent_file = NULL;
+- 
+      /* Try to start the GUI */
+      gui_attempt_start();
+  
+      /* Notify the parent */
+!     if (parent_file != NULL)
+      {
+! 	fputs(gui.in_use ? "ok" : "fail", parent_file);
+! 	fclose(parent_file);
+      }
+  
+      /* If we failed to start the GUI, exit now. */
+--- 289,305 ----
+      gui_mch_forked();
+  # endif
+  
+      /* Try to start the GUI */
+      gui_attempt_start();
+  
+      /* Notify the parent */
+!     if (!pipe_error)
+      {
+! 	if (gui.in_use)
+! 	    write_eintr(pipefd[1], "ok", 3);
+! 	else
+! 	    write_eintr(pipefd[1], "fail", 5);
+! 	close(pipefd[1]);
+      }
+  
+      /* If we failed to start the GUI, exit now. */
+***************
+*** 323,339 ****
+      static int
+  gui_read_child_pipe(int fd)
+  {
+!     size_t	bytes_read;
+!     FILE	*file;
+!     char	buffer[10];
+! 
+!     file = fdopen(fd, "r");
+!     if (!file)
+  	return GUI_CHILD_IO_ERROR;
+! 
+!     bytes_read = fread(buffer, sizeof(char), sizeof(buffer)-1, file);
+!     buffer[bytes_read] = '\0';
+!     fclose(file);
+      if (strcmp(buffer, "ok") == 0)
+  	return GUI_CHILD_OK;
+      return GUI_CHILD_FAILED;
+--- 320,335 ----
+      static int
+  gui_read_child_pipe(int fd)
+  {
+!     long	bytes_read;
+! #define READ_BUFFER_SIZE 10
+!     char	buffer[READ_BUFFER_SIZE];
+! 
+!     bytes_read = read_eintr(fd, buffer, READ_BUFFER_SIZE - 1);
+! #undef READ_BUFFER_SIZE
+!     close(fd);
+!     if (bytes_read < 0)
+  	return GUI_CHILD_IO_ERROR;
+!     buffer[bytes_read] = NUL;
+      if (strcmp(buffer, "ok") == 0)
+  	return GUI_CHILD_OK;
+      return GUI_CHILD_FAILED;
+*** ../vim-7.3.343/src/version.c	2011-10-20 21:09:25.000000000 +0200
+--- src/version.c	2011-10-20 21:27:31.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     344,
+  /**/
+
+-- 
+From "know your smileys":
+ *<|:-)	Santa Claus (Ho Ho Ho)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.345 b/source/ap/vim/patches/7.3.345
new file mode 100644
index 00000000..99dd074a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.345
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.345
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.345
+Problem:    When switching language with ":lang" the window title doesn't
+	    change until later.
+Solution:   Update the window title right away. (Dominique Pelle)
+Files:	    src/ex_cmds2.c
+
+
+*** ../vim-7.3.344/src/ex_cmds2.c	2011-06-26 04:25:24.000000000 +0200
+--- src/ex_cmds2.c	2011-10-20 21:31:09.000000000 +0200
+***************
+*** 4154,4159 ****
+--- 4154,4162 ----
+  	    /* Set v:lang, v:lc_time and v:ctype to the final result. */
+  	    set_lang_var();
+  # endif
++ # ifdef FEAT_TITLE
++ 	    maketitle();
++ # endif
+  	}
+      }
+  }
+*** ../vim-7.3.344/src/version.c	2011-10-20 21:27:57.000000000 +0200
+--- src/version.c	2011-10-20 21:38:32.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     345,
+  /**/
+
+-- 
+You can't have everything.  Where would you put it?
+		-- Steven Wright
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.346 b/source/ap/vim/patches/7.3.346
new file mode 100644
index 00000000..e6b1a2b6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.346
@@ -0,0 +1,143 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.346
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.346
+Problem:    It's hard to test netbeans commands.
+Solution:   Process netbeans commands after :sleep. (Xavier de Gaye)
+Files:	    runtime/doc/netbeans.txt, src/ex_docmd.c, src/netbeans.c
+
+
+*** ../vim-7.3.345/runtime/doc/netbeans.txt	2010-09-29 17:26:57.000000000 +0200
+--- runtime/doc/netbeans.txt	2011-10-20 21:51:41.000000000 +0200
+***************
+*** 1,4 ****
+! *netbeans.txt*  For Vim version 7.3.  Last change: 2010 Aug 20
+  
+  
+  		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
+--- 1,4 ----
+! *netbeans.txt*  For Vim version 7.3.  Last change: 2011 Oct 20
+  
+  
+  		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
+***************
+*** 263,268 ****
+--- 263,274 ----
+  plain UTF-8 text this protocol could also be used with any other communication
+  mechanism.
+  
++ Netbeans messages are processed when Vim is idle, waiting for user input.
++ When Vim is run in non-interactive mode, for example when running an automated
++ test case that sources a Vim script, the idle loop may not be called often
++ enough. In that case, insert |sleep| commands in the Vim script. The |sleep|
++ command does invoke Netbeans messages processing.
++ 
+  6.1 Kinds of messages		|nb-messages|
+  6.2 Terms			|nb-terms|
+  6.3 Commands			|nb-commands|
+***************
+*** 820,826 ****
+  ==============================================================================
+  7. NetBeans commands					*netbeans-commands*
+  
+! 							*:nbstart* *E511*
+  :nbs[tart] {connection}	Start a new Netbeans session with {connection} as the
+  			socket connection parameters.  The format of
+  			{connection} is described in |netbeans-parameters|.
+--- 826,832 ----
+  ==============================================================================
+  7. NetBeans commands					*netbeans-commands*
+  
+! 							*:nbstart* *E511* *E838*
+  :nbs[tart] {connection}	Start a new Netbeans session with {connection} as the
+  			socket connection parameters.  The format of
+  			{connection} is described in |netbeans-parameters|.
+***************
+*** 833,843 ****
+  			signs.
+  
+  							*:nbkey*
+! :nb[key] {key}		Pass the {key} to the Vim Controller for processing
+! 
+! When a hot-key has been installed with the specialKeys command, this command
+! can be used to generate a hotkey messages to the Vim Controller. The events
+! newDotAndMark, keyCommand and keyAtPos are generated (in this order).
+  
+  
+  ==============================================================================
+--- 839,854 ----
+  			signs.
+  
+  							*:nbkey*
+! :nb[key] {key}		Pass the {key} to the Vim Controller for processing.
+! 			When a hot-key has been installed with the specialKeys
+! 			command, this command can be used to generate a hotkey
+! 			message to the Vim Controller.
+! 			This command can also be used to pass any text to the
+! 			Vim  Controller. It is used by Pyclewn, for example,
+! 			to build the complete set of gdb commands as Vim user
+! 			commands.
+! 			The events newDotAndMark, keyCommand and keyAtPos are
+! 			generated (in this order).
+  
+  
+  ==============================================================================
+*** ../vim-7.3.345/src/ex_docmd.c	2011-09-30 18:35:49.000000000 +0200
+--- src/ex_docmd.c	2011-10-20 21:50:06.000000000 +0200
+***************
+*** 8205,8210 ****
+--- 8205,8216 ----
+      {
+  	ui_delay(msec - done > 1000L ? 1000L : msec - done, TRUE);
+  	ui_breakcheck();
++ #ifdef FEAT_NETBEANS_INTG
++ 	/* Process the netbeans messages that may have been received in the
++ 	 * call to ui_breakcheck() when the GUI is in use. This may occur when
++ 	 * running a test case. */
++ 	netbeans_parse_messages();
++ #endif
+      }
+  }
+  
+*** ../vim-7.3.345/src/netbeans.c	2011-04-11 21:35:03.000000000 +0200
+--- src/netbeans.c	2011-10-20 21:47:17.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,26 ----
+   * which are *between* characters, whereas vim uses line number
+   * and column number which are *on* characters.
+   * See ":help netbeans-protocol" for explanation.
++  *
++  * The Netbeans messages are received and queued in the gui event loop, or in
++  * the select loop when Vim runs in a terminal. These messages are processed
++  * by netbeans_parse_messages() which is invoked in the idle loop when Vim is
++  * waiting for user input. The function netbeans_parse_messages() is also
++  * called from the ":sleep" command, to allow the execution of test cases that
++  * may not invoke the idle loop.
+   */
+  
+  #include "vim.h"
+*** ../vim-7.3.345/src/version.c	2011-10-20 21:57:43.000000000 +0200
+--- src/version.c	2011-10-20 21:50:23.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     346,
+  /**/
+
+-- 
+From "know your smileys":
+ ...---...   SOS
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.347 b/source/ap/vim/patches/7.3.347
new file mode 100644
index 00000000..85b0feb7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.347
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.347
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.347
+Problem:    When dropping text from a browser on Vim it receives HTML even
+	    though "html" is excluded from 'clipboard'. (Andrei Avk)
+Solution:   Fix the condition for TARGET_HTML.
+Files:	    src/gui_gtk_x11.c
+
+
+*** ../vim-7.3.346/src/gui_gtk_x11.c	2011-08-10 17:44:41.000000000 +0200
+--- src/gui_gtk_x11.c	2011-10-23 20:56:38.000000000 +0200
+***************
+*** 3081,3087 ****
+  
+      for (i = 0; i < (int)N_DND_TARGETS; ++i)
+      {
+! 	if (!clip_html && selection_targets[i].info == TARGET_HTML)
+  	    n_targets--;
+  	else
+  	    targets[j++] = dnd_targets[i];
+--- 3081,3087 ----
+  
+      for (i = 0; i < (int)N_DND_TARGETS; ++i)
+      {
+! 	if (!clip_html && dnd_targets[i].info == TARGET_HTML)
+  	    n_targets--;
+  	else
+  	    targets[j++] = dnd_targets[i];
+*** ../vim-7.3.346/src/version.c	2011-10-20 21:58:20.000000000 +0200
+--- src/version.c	2011-10-26 11:35:23.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     347,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for a lawn that needs mowing, windows that need cleaning
+and gutters that need fixing because it means I have a home.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.348 b/source/ap/vim/patches/7.3.348
new file mode 100644
index 00000000..e92febb9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.348
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.348
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.348
+Problem:    "call range(1, 947948399)" causes a crash. (ZyX)
+Solution:   Avoid a loop in the out of memory message.
+Files:	    src/misc2.c
+
+
+*** ../vim-7.3.347/src/misc2.c	2011-08-19 22:28:58.000000000 +0200
+--- src/misc2.c	2011-10-26 11:17:26.000000000 +0200
+***************
+*** 1012,1019 ****
+      {
+  	/* Don't hide this message */
+  	emsg_silent = 0;
+! 	EMSGN(_("E342: Out of memory!  (allocating %lu bytes)"), size);
+  	did_outofmem_msg = TRUE;
+      }
+  }
+  
+--- 1012,1023 ----
+      {
+  	/* Don't hide this message */
+  	emsg_silent = 0;
+! 
+! 	/* Must come first to avoid coming back here when printing the error
+! 	 * message fails, e.g. when setting v:errmsg. */
+  	did_outofmem_msg = TRUE;
++ 
++ 	EMSGN(_("E342: Out of memory!  (allocating %lu bytes)"), size);
+      }
+  }
+  
+*** ../vim-7.3.347/src/version.c	2011-10-26 11:36:21.000000000 +0200
+--- src/version.c	2011-10-26 11:38:33.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     348,
+  /**/
+
+-- 
+A fool learns from his mistakes, a wise man from someone else's.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.349 b/source/ap/vim/patches/7.3.349
new file mode 100644
index 00000000..ac519afe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.349
@@ -0,0 +1,88 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.349
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.349
+Problem:    When running out of memory during startup trying to open a
+	    swapfile will loop forever.
+Solution:   Let findswapname() set dirp to NULL if out of memory.
+Files:	    src/memline.c
+
+
+*** ../vim-7.3.348/src/memline.c	2011-06-13 01:07:22.000000000 +0200
+--- src/memline.c	2011-10-26 11:26:06.000000000 +0200
+***************
+*** 621,626 ****
+--- 621,628 ----
+  	    break;
+  	fname = findswapname(buf, &dirp, mfp->mf_fname);
+  						    /* alloc's fname */
++ 	if (dirp == NULL)	    /* out of memory */
++ 	    break;
+  	if (fname == NULL)	    /* no file name found for this dir */
+  	    continue;
+  
+***************
+*** 744,749 ****
+--- 746,753 ----
+  	 * and creating it, another Vim creates the file.  In that case the
+  	 * creation will fail and we will use another directory. */
+  	fname = findswapname(buf, &dirp, NULL); /* allocates fname */
++ 	if (dirp == NULL)
++ 	    break;  /* out of memory */
+  	if (fname == NULL)
+  	    continue;
+  	if (mf_open_file(mfp, fname) == OK)	/* consumes fname! */
+***************
+*** 4114,4119 ****
+--- 4118,4124 ----
+   *
+   * Several names are tried to find one that does not exist
+   * Returns the name in allocated memory or NULL.
++  * When out of memory "dirp" is set to NULL.
+   *
+   * Note: If BASENAMELEN is not correct, you will get error messages for
+   *	 not being able to open the swap or undo file
+***************
+*** 4157,4163 ****
+       * First allocate some memory to put the directory name in.
+       */
+      dir_name = alloc((unsigned)STRLEN(*dirp) + 1);
+!     if (dir_name != NULL)
+  	(void)copy_option_part(dirp, dir_name, 31000, ",");
+  
+      /*
+--- 4162,4170 ----
+       * First allocate some memory to put the directory name in.
+       */
+      dir_name = alloc((unsigned)STRLEN(*dirp) + 1);
+!     if (dir_name == NULL)
+! 	*dirp = NULL;
+!     else
+  	(void)copy_option_part(dirp, dir_name, 31000, ",");
+  
+      /*
+*** ../vim-7.3.348/src/version.c	2011-10-26 11:40:56.000000000 +0200
+--- src/version.c	2011-10-26 11:43:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     349,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for all the complaining I hear about the government
+because it means we have freedom of speech.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.350 b/source/ap/vim/patches/7.3.350
new file mode 100644
index 00000000..5a1f3327
--- /dev/null
+++ b/source/ap/vim/patches/7.3.350
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.350
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.350
+Problem:    Block of code after ":lua << EOF" may not work. (Paul Isambert)
+Solution:   Recognize the ":lua" command, skip to EOF.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.349/src/eval.c	2011-09-30 18:35:49.000000000 +0200
+--- src/eval.c	2011-10-26 13:12:06.000000000 +0200
+***************
+*** 20899,20904 ****
+--- 20899,20906 ----
+  				    && (!ASCII_ISALPHA(p[2]) || p[2] == 'r'))
+  			|| (p[0] == 't' && p[1] == 'c'
+  				    && (!ASCII_ISALPHA(p[2]) || p[2] == 'l'))
++ 			|| (p[0] == 'l' && p[1] == 'u' && p[2] == 'a'
++ 				    && !ASCII_ISALPHA(p[3]))
+  			|| (p[0] == 'r' && p[1] == 'u' && p[2] == 'b'
+  				    && (!ASCII_ISALPHA(p[3]) || p[3] == 'y'))
+  			|| (p[0] == 'm' && p[1] == 'z'
+*** ../vim-7.3.349/src/version.c	2011-10-26 11:44:15.000000000 +0200
+--- src/version.c	2011-10-26 13:13:21.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     350,
+  /**/
+
+-- 
+From "know your smileys":
+ :-| :-|   Deja' vu!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.351 b/source/ap/vim/patches/7.3.351
new file mode 100644
index 00000000..15b2194c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.351
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.351
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.351
+Problem:    Text formatting uses start of insert position when it should not.
+	    (Peter Wagenaar)
+Solution:   Do not use Insstart when intentionally formatting.
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.350/src/edit.c	2011-09-21 18:23:02.000000000 +0200
+--- src/edit.c	2011-10-26 16:58:21.000000000 +0200
+***************
+*** 6078,6083 ****
+--- 6078,6084 ----
+  	 * Stop at first entered white when 'formatoptions' has 'v'
+  	 */
+  	while ((!fo_ins_blank && !has_format_option(FO_INS_VI))
++ 		    || (flags & INSCHAR_FORMAT)
+  		    || curwin->w_cursor.lnum != Insstart.lnum
+  		    || curwin->w_cursor.col >= Insstart.col)
+  	{
+*** ../vim-7.3.350/src/version.c	2011-10-26 13:19:23.000000000 +0200
+--- src/version.c	2011-10-26 17:03:37.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     351,
+  /**/
+
+-- 
+From "know your smileys":
+ :-*	A big kiss!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.352 b/source/ap/vim/patches/7.3.352
new file mode 100644
index 00000000..52842cfc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.352
@@ -0,0 +1,108 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.352
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.352
+Problem:    When completing methods dict functions and script-local functions
+	    get in the way.
+Solution:   Sort function names starting with "<" to the end. (Yasuhiro
+	    Matsumoto)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.351/src/ex_getln.c	2011-09-30 17:46:14.000000000 +0200
+--- src/ex_getln.c	2011-10-26 21:37:53.000000000 +0200
+***************
+*** 121,126 ****
+--- 121,134 ----
+  static int	ex_window __ARGS((void));
+  #endif
+  
++ #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
++ static int
++ #ifdef __BORLANDC__
++ _RTLENTRYF
++ #endif
++ sort_func_compare __ARGS((const void *s1, const void *s2));
++ #endif
++ 
+  /*
+   * getcmdline() - accept a command line starting with firstc.
+   *
+***************
+*** 3286,3291 ****
+--- 3294,3317 ----
+      return check_abbr(c, ccline.cmdbuff, ccline.cmdpos, 0);
+  }
+  
++ #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
++     static int
++ #ifdef __BORLANDC__
++ _RTLENTRYF
++ #endif
++ sort_func_compare(s1, s2)
++     const void *s1;
++     const void *s2;
++ {
++     char_u *p1 = *(char_u **)s1;
++     char_u *p2 = *(char_u **)s2;
++ 
++     if (*p1 != '<' && *p2 == '<') return -1;
++     if (*p1 == '<' && *p2 != '<') return 1;
++     return STRCMP(p1, p2);
++ }
++ #endif
++ 
+  /*
+   * Return FAIL if this is not an appropriate context in which to do
+   * completion of anything, return OK if it is (even if there are no matches).
+***************
+*** 4735,4741 ****
+  
+      /* Sort the results.  Keep menu's in the specified order. */
+      if (xp->xp_context != EXPAND_MENUNAMES && xp->xp_context != EXPAND_MENUS)
+! 	sort_strings(*file, *num_file);
+  
+  #ifdef FEAT_CMDL_COMPL
+      /* Reset the variables used for special highlight names expansion, so that
+--- 4761,4776 ----
+  
+      /* Sort the results.  Keep menu's in the specified order. */
+      if (xp->xp_context != EXPAND_MENUNAMES && xp->xp_context != EXPAND_MENUS)
+!     {
+! 	if (xp->xp_context == EXPAND_EXPRESSION
+! 		|| xp->xp_context == EXPAND_FUNCTIONS
+! 		|| xp->xp_context == EXPAND_USER_FUNC)
+! 	    /* <SNR> functions should be sorted to the end. */
+! 	    qsort((void *)*file, (size_t)*num_file, sizeof(char_u *),
+! 							   sort_func_compare);
+! 	else
+! 	    sort_strings(*file, *num_file);
+!     }
+  
+  #ifdef FEAT_CMDL_COMPL
+      /* Reset the variables used for special highlight names expansion, so that
+*** ../vim-7.3.351/src/version.c	2011-10-26 17:04:23.000000000 +0200
+--- src/version.c	2011-10-26 21:49:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     352,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+94. Now admit it... How many of you have made "modem noises" into
+    the phone just to see if it was possible? :-)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.353 b/source/ap/vim/patches/7.3.353
new file mode 100644
index 00000000..1846243e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.353
@@ -0,0 +1,155 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.353
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.353 (after 7.3.343)
+Problem:    Missing part of the urxvt patch.
+Solution:   Add the change in term.c
+Files:	    src/term.c
+
+
+*** ../vim-7.3.352/src/term.c	2011-09-14 14:43:21.000000000 +0200
+--- src/term.c	2011-10-26 23:48:01.000000000 +0200
+***************
+*** 4008,4014 ****
+  	}
+  
+  #ifdef FEAT_TERMRESPONSE
+! 	if (key_name[0] == NUL)
+  	{
+  	    /* Check for xterm version string: "<Esc>[>{x};{vers};{y}c".  Also
+  	     * eat other possible responses to t_RV, rxvt returns
+--- 4008,4016 ----
+  	}
+  
+  #ifdef FEAT_TERMRESPONSE
+! 	if (key_name[0] == NUL
+! 	    /* URXVT mouse uses <ESC>[#;#;#M, but we are matching <ESC>[ */
+! 	    || key_name[0] == KS_URXVT_MOUSE)
+  	{
+  	    /* Check for xterm version string: "<Esc>[>{x};{vers};{y}c".  Also
+  	     * eat other possible responses to t_RV, rxvt returns
+***************
+*** 4047,4053 ****
+  		    if (tp[1 + (tp[0] != CSI)] == '>' && j == 2)
+  		    {
+  			/* if xterm version >= 95 use mouse dragging */
+! 			if (extra >= 95)
+  			    set_option_value((char_u *)"ttym", 0L,
+  						       (char_u *)"xterm2", 0);
+  			/* if xterm version >= 141 try to get termcap codes */
+--- 4049,4055 ----
+  		    if (tp[1 + (tp[0] != CSI)] == '>' && j == 2)
+  		    {
+  			/* if xterm version >= 95 use mouse dragging */
+! 			if (extra >= 95 && ttym_flags != TTYM_URXVT)
+  			    set_option_value((char_u *)"ttym", 0L,
+  						       (char_u *)"xterm2", 0);
+  			/* if xterm version >= 141 try to get termcap codes */
+***************
+*** 4141,4146 ****
+--- 4143,4151 ----
+  # ifdef FEAT_MOUSE_PTERM
+  		|| key_name[0] == (int)KS_PTERM_MOUSE
+  # endif
++ # ifdef FEAT_MOUSE_URXVT
++ 		|| key_name[0] == (int)KS_URXVT_MOUSE
++ # endif
+  		)
+  	{
+  	    is_click = is_drag = FALSE;
+***************
+*** 4219,4225 ****
+--- 4224,4292 ----
+  		    else
+  			break;
+  		}
++ 	    }
++ 
++ # ifdef FEAT_MOUSE_URXVT
++ 	    if (key_name[0] == (int)KS_URXVT_MOUSE)
++ 	    {
++ 		for (;;)
++ 		{
++ 		    /* URXVT 1015 mouse reporting mode:
++ 		     * Almost identical to xterm mouse mode, except the values
++ 		     * are decimal instead of bytes.
++ 		     *
++ 		     * \033[%d;%d;%dM
++ 		     *		  ^-- row
++ 		     *	       ^----- column
++ 		     *	    ^-------- code
++ 		     */
++ 		    p = tp + slen;
++ 
++ 		    mouse_code = getdigits(&p);
++ 		    if (*p++ != ';')
++ 			return -1;
++ 
++ 		    mouse_col = getdigits(&p) - 1;
++ 		    if (*p++ != ';')
++ 			return -1;
++ 
++ 		    mouse_row = getdigits(&p) - 1;
++ 		    if (*p++ != 'M')
++ 			return -1;
++ 
++ 		    slen += (int)(p - (tp + slen));
++ 
++ 		    /* skip this one if next one has same code (like xterm
++ 		     * case) */
++ 		    j = termcodes[idx].len;
++ 		    if (STRNCMP(tp, tp + slen, (size_t)j) == 0) {
++ 			/* check if the command is complete by looking for the
++ 			 * M */
++ 			int slen2;
++ 			int cmd_complete = 0;
++ 			for (slen2 = slen; slen2 < len; slen2++) {
++ 			    if (tp[slen2] == 'M') {
++ 				cmd_complete = 1;
++ 				break;
++ 			    }
++ 			}
++ 			p += j;
++ 			if (cmd_complete && getdigits(&p) == mouse_code) {
++ 			    slen += j; /* skip the \033[ */
++ 			    continue;
++ 			}
++ 		    }
++ 		    break;
++ 		}
++ 	    }
++ # endif
+  
++ 	if (key_name[0] == (int)KS_MOUSE
++ #ifdef FEAT_MOUSE_URXVT
++ 	    || key_name[0] == (int)KS_URXVT_MOUSE
++ #endif
++ 	    )
++ 	{
+  #  if !defined(MSWIN) && !defined(MSDOS)
+  		/*
+  		 * Handle mouse events.
+*** ../vim-7.3.352/src/version.c	2011-10-26 22:02:10.000000000 +0200
+--- src/version.c	2011-10-26 23:43:26.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     353,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+99. The hum of a cooling fan and the click of keys is comforting to you.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.354 b/source/ap/vim/patches/7.3.354
new file mode 100644
index 00000000..8250f9af
--- /dev/null
+++ b/source/ap/vim/patches/7.3.354
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.354
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.354
+Problem:    ":set backspace+=eol" doesn't work when 'backspace' has a 
+            backwards compatible value of 2.
+Solution:   Convert the number to a string. (Hirohito Higashi)
+Files:      src/option.c
+
+
+*** ../vim-7.3.353/src/option.c	2011-10-12 16:57:07.000000000 +0200
+--- src/option.c	2011-11-30 11:11:15.000000000 +0100
+***************
+*** 4567,4572 ****
+--- 4567,4597 ----
+  				arg = errbuf;
+  			    }
+  			    /*
++ 			     * Convert 'backspace' number to string, for
++ 			     * adding, prepending and removing string.
++ 			     */
++ 			    else if (varp == (char_u *)&p_bs
++ 					 && VIM_ISDIGIT(**(char_u **)varp))
++ 			    {
++ 				i = getdigits((char_u **)varp);
++ 				switch (i)
++ 				{
++ 				    case 0:
++ 					*(char_u **)varp = empty_option;
++ 					break;
++ 				    case 1:
++ 					*(char_u **)varp = vim_strsave(
++ 						      (char_u *)"indent,eol");
++ 					break;
++ 				    case 2:
++ 					*(char_u **)varp = vim_strsave(
++ 						(char_u *)"indent,eol,start");
++ 					break;
++ 				}
++ 				vim_free(oldval);
++ 				oldval = *(char_u **)varp;
++ 			    }
++ 			    /*
+  			     * Convert 'whichwrap' number to string, for
+  			     * backwards compatibility with Vim 3.0.
+  			     * Misuse errbuf[] for the resulting string.
+*** ../vim-7.3.353/src/version.c	2011-10-26 23:48:17.000000000 +0200
+--- src/version.c	2011-11-30 11:14:44.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     354,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+206. You religiously respond immediately to e-mail, while ignoring
+     your growing pile of snail mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.355 b/source/ap/vim/patches/7.3.355
new file mode 100644
index 00000000..51bc3b7f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.355
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.355
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.355
+Problem:    GTK warnings when using netrw.vim. (Ivan Krasilnikov)
+Solution:   Do not remove the beval event handler twice.
+Files:	    src/option.c
+
+
+*** ../vim-7.3.354/src/option.c	2011-11-30 11:15:40.000000000 +0100
+--- src/option.c	2011-11-30 11:11:15.000000000 +0100
+***************
+*** 7796,7804 ****
+  #ifdef FEAT_BEVAL
+      else if ((int *)varp == &p_beval)
+      {
+! 	if (p_beval == TRUE)
+  	    gui_mch_enable_beval_area(balloonEval);
+! 	else
+  	    gui_mch_disable_beval_area(balloonEval);
+      }
+  #endif
+--- 7796,7804 ----
+  #ifdef FEAT_BEVAL
+      else if ((int *)varp == &p_beval)
+      {
+! 	if (p_beval && !old_value)
+  	    gui_mch_enable_beval_area(balloonEval);
+! 	else if (!p_beval && old_value)
+  	    gui_mch_disable_beval_area(balloonEval);
+      }
+  #endif
+*** ../vim-7.3.354/src/version.c	2011-11-30 11:15:40.000000000 +0100
+--- src/version.c	2011-11-30 11:30:55.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     355,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+209. Your house stinks because you haven't cleaned it in a week.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.356 b/source/ap/vim/patches/7.3.356
new file mode 100644
index 00000000..8b5572bd
--- /dev/null
+++ b/source/ap/vim/patches/7.3.356
@@ -0,0 +1,79 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.356
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.356
+Problem:    Using "o" with 'cindent' set may freeze Vim. (lolilolicon)
+Solution:   Skip over {} correctly. (Hari G)
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.355/src/misc1.c	2011-10-04 18:03:43.000000000 +0200
+--- src/misc1.c	2011-11-30 12:56:55.000000000 +0100
+***************
+*** 6127,6133 ****
+  
+  /*
+   * Set w_cursor.col to the column number of the last unmatched ')' or '{' in
+!  * line "l".
+   */
+      static int
+  find_last_paren(l, start, end)
+--- 6127,6133 ----
+  
+  /*
+   * Set w_cursor.col to the column number of the last unmatched ')' or '{' in
+!  * line "l".  "l" must point to the start of the line.
+   */
+      static int
+  find_last_paren(l, start, end)
+***************
+*** 6140,6146 ****
+  
+      curwin->w_cursor.col = 0;		    /* default is start of line */
+  
+!     for (i = 0; l[i]; i++)
+      {
+  	i = (int)(cin_skipcomment(l + i) - l); /* ignore parens in comments */
+  	i = (int)(skip_string(l + i) - l);    /* ignore parens in quotes */
+--- 6140,6146 ----
+  
+      curwin->w_cursor.col = 0;		    /* default is start of line */
+  
+!     for (i = 0; l[i] != NUL; i++)
+      {
+  	i = (int)(cin_skipcomment(l + i) - l); /* ignore parens in comments */
+  	i = (int)(skip_string(l + i) - l);    /* ignore parens in quotes */
+***************
+*** 7953,7958 ****
+--- 7953,7959 ----
+  			 * If we're at the end of a block, skip to the start of
+  			 * that block.
+  			 */
++ 			l = ml_get_curline();
+  			if (find_last_paren(l, '{', '}')
+  				&& (trypos = find_start_brace(ind_maxcomment))
+  							    != NULL) /* XXX */
+*** ../vim-7.3.355/src/version.c	2011-11-30 11:31:25.000000000 +0100
+--- src/version.c	2011-11-30 13:02:52.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     356,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+213. Your kids start referring to you as "that guy in front of the monitor."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.357 b/source/ap/vim/patches/7.3.357
new file mode 100644
index 00000000..893a6bb4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.357
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.357
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.357
+Problem:    Compiler warning in MS-Windows console build.
+Solution:   Adjust return type of PrintHookProc(). (Mike Williams)
+Files:	    src/os_mswin.c
+
+
+*** ../vim-7.3.356/src/os_mswin.c	2011-09-21 20:09:38.000000000 +0200
+--- src/os_mswin.c	2011-11-30 13:41:13.000000000 +0100
+***************
+*** 1869,1875 ****
+  
+  #ifndef FEAT_GUI
+  
+!     static UINT CALLBACK
+  PrintHookProc(
+  	HWND hDlg,	// handle to dialog box
+  	UINT uiMsg,	// message identifier
+--- 1869,1875 ----
+  
+  #ifndef FEAT_GUI
+  
+!     static UINT_PTR CALLBACK
+  PrintHookProc(
+  	HWND hDlg,	// handle to dialog box
+  	UINT uiMsg,	// message identifier
+*** ../vim-7.3.356/src/version.c	2011-11-30 13:03:24.000000000 +0100
+--- src/version.c	2011-11-30 13:41:55.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     357,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+215. Your mouse-clicking forearm rivals Popeye's.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.358 b/source/ap/vim/patches/7.3.358
new file mode 100644
index 00000000..b9b385f8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.358
@@ -0,0 +1,74 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.358
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.358 (after 7.3.353)
+Problem:    Mouse support doesn't work properly.
+Solution:   Add HMT_URXVT. (lilydjwg, James McCoy)
+Files:	    src/term.c
+
+
+*** ../vim-7.3.357/src/term.c	2011-10-26 23:48:17.000000000 +0200
+--- src/term.c	2011-11-30 14:42:22.000000000 +0100
+***************
+*** 1996,2001 ****
+--- 1996,2002 ----
+  #  define HMT_DEC	4
+  #  define HMT_JSBTERM	8
+  #  define HMT_PTERM	16
++ #  define HMT_URXVT	32
+  static int has_mouse_termcode = 0;
+  # endif
+  
+***************
+*** 2031,2036 ****
+--- 2032,2042 ----
+  	has_mouse_termcode |= HMT_PTERM;
+      else
+  #   endif
++ #   ifdef FEAT_MOUSE_URXVT
++     if (n == KS_URXVT_MOUSE)
++ 	has_mouse_termcode |= HMT_URXVT;
++     else
++ #   endif
+  	has_mouse_termcode |= HMT_NORMAL;
+  #  endif
+  }
+***************
+*** 2068,2073 ****
+--- 2074,2084 ----
+  	has_mouse_termcode &= ~HMT_PTERM;
+      else
+  #   endif
++ #   ifdef FEAT_MOUSE_URXVT
++     if (n == KS_URXVT_MOUSE)
++ 	has_mouse_termcode &= ~HMT_URXVT;
++     else
++ #   endif
+  	has_mouse_termcode &= ~HMT_NORMAL;
+  #  endif
+  }
+*** ../vim-7.3.357/src/version.c	2011-11-30 13:42:40.000000000 +0100
+--- src/version.c	2011-11-30 14:45:06.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     358,
+  /**/
+
+-- 
+I noticed my daughter's Disney-net password on a sticky note:
+"MickeyMinnieGoofyPluto".  I asked her why it was so long.
+"Because they say it has to have at least four characters."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.359 b/source/ap/vim/patches/7.3.359
new file mode 100644
index 00000000..7fbd3f6f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.359
@@ -0,0 +1,64 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.359
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.359
+Problem:    Command line completion shows dict functions.
+Solution:   Skip dict functions for completion. (Yasuhiro Matsumoto)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.358/src/eval.c	2011-10-26 13:19:23.000000000 +0200
+--- src/eval.c	2011-11-30 14:53:38.000000000 +0100
+***************
+*** 875,881 ****
+  
+  #ifdef EBCDIC
+      /*
+!      * Sort the function table, to enable binary sort.
+       */
+      sortFunctions();
+  #endif
+--- 875,881 ----
+  
+  #ifdef EBCDIC
+      /*
+!      * Sort the function table, to enable binary search.
+       */
+      sortFunctions();
+  #endif
+***************
+*** 21737,21742 ****
+--- 21737,21745 ----
+  	    ++hi;
+  	fp = HI2UF(hi);
+  
++ 	if (fp->uf_flags & FC_DICT)
++ 	    return NULL; /* don't show dict functions */
++ 
+  	if (STRLEN(fp->uf_name) + 4 >= IOSIZE)
+  	    return fp->uf_name;	/* prevents overflow */
+  
+*** ../vim-7.3.358/src/version.c	2011-11-30 14:47:12.000000000 +0100
+--- src/version.c	2011-11-30 14:56:57.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     359,
+  /**/
+
+-- 
+'Psychologist' -- Someone who looks at everyone else when
+an attractive woman enters the room.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.360 b/source/ap/vim/patches/7.3.360
new file mode 100644
index 00000000..de153c83
--- /dev/null
+++ b/source/ap/vim/patches/7.3.360
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.360
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.360
+Problem:    Interrupting the load of an autoload function may cause a crash.
+Solution:   Do not use the hashitem when not valid. (Yukihiro Nakadaira)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.359/src/eval.c	2011-11-30 14:57:26.000000000 +0100
+--- src/eval.c	2011-11-30 15:06:53.000000000 +0100
+***************
+*** 19589,19597 ****
+  	 * worked find the variable again.  Don't auto-load a script if it was
+  	 * loaded already, otherwise it would be loaded every time when
+  	 * checking if a function name is a Funcref variable. */
+! 	if (ht == &globvarht && !writing
+! 			    && script_autoload(varname, FALSE) && !aborting())
+  	    hi = hash_find(ht, varname);
+  	if (HASHITEM_EMPTY(hi))
+  	    return NULL;
+      }
+--- 19589,19602 ----
+  	 * worked find the variable again.  Don't auto-load a script if it was
+  	 * loaded already, otherwise it would be loaded every time when
+  	 * checking if a function name is a Funcref variable. */
+! 	if (ht == &globvarht && !writing)
+! 	{
+! 	    /* Note: script_autoload() may make "hi" invalid. It must either
+! 	     * be obtained again or not used. */
+! 	    if (!script_autoload(varname, FALSE) || aborting())
+! 		return NULL;
+  	    hi = hash_find(ht, varname);
++ 	}
+  	if (HASHITEM_EMPTY(hi))
+  	    return NULL;
+      }
+*** ../vim-7.3.359/src/version.c	2011-11-30 14:57:26.000000000 +0100
+--- src/version.c	2011-11-30 15:17:28.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     360,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+217. Your sex life has drastically improved...so what if it's only cyber-sex!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.361 b/source/ap/vim/patches/7.3.361
new file mode 100644
index 00000000..c128057f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.361
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.361
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.361
+Problem:    Accessing memory after it is freed when EXITFREE is defined.
+Solution:   Don't access curwin when firstwin is NULL. (Dominique Pelle)
+Files:	    src/buffer.c
+
+*** ../vim-7.3.360/src/buffer.c	2011-09-14 17:50:05.000000000 +0200
+--- src/buffer.c	2011-11-30 15:38:00.000000000 +0100
+***************
+*** 567,574 ****
+      diff_buf_delete(buf);	    /* Can't use 'diff' for unloaded buffer. */
+  #endif
+  #ifdef FEAT_SYN_HL
+!     if (curwin->w_buffer == buf)
+! 	reset_synblock(curwin);	    /* remove any ownsyntax */
+  #endif
+  
+  #ifdef FEAT_FOLDING
+--- 567,575 ----
+      diff_buf_delete(buf);	    /* Can't use 'diff' for unloaded buffer. */
+  #endif
+  #ifdef FEAT_SYN_HL
+!     /* Remove any ownsyntax, unless exiting. */
+!     if (firstwin != NULL && curwin->w_buffer == buf)
+! 	reset_synblock(curwin);
+  #endif
+  
+  #ifdef FEAT_FOLDING
+*** ../vim-7.3.360/src/version.c	2011-11-30 15:19:25.000000000 +0100
+--- src/version.c	2011-11-30 15:40:22.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     361,
+  /**/
+
+
+-- 
+From the classified section of a city newspaper:
+Dog for sale: eats anything and is fond of children.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.362 b/source/ap/vim/patches/7.3.362
new file mode 100644
index 00000000..00568861
--- /dev/null
+++ b/source/ap/vim/patches/7.3.362
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.362
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.362
+Problem:    ml_get error when using ":g" with folded lines.
+Solution:   Adjust the line number for changed_lines(). (Christian Brabandt)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.361/src/ex_cmds.c	2011-10-20 18:17:38.000000000 +0200
+--- src/ex_cmds.c	2011-11-30 16:58:34.000000000 +0100
+***************
+*** 820,826 ****
+  	curwin->w_cursor.lnum = dest + (line2 - line1) + 1;
+  
+      if (line1 < dest)
+! 	changed_lines(line1, 0, dest + num_lines + 1, 0L);
+      else
+  	changed_lines(dest + 1, 0, line1 + num_lines, 0L);
+  
+--- 820,832 ----
+  	curwin->w_cursor.lnum = dest + (line2 - line1) + 1;
+  
+      if (line1 < dest)
+!     {
+! 	dest += num_lines + 1;
+! 	last_line = curbuf->b_ml.ml_line_count;
+! 	if (dest > last_line + 1)
+! 	    dest = last_line + 1;
+! 	changed_lines(line1, 0, dest, 0L);
+!     }
+      else
+  	changed_lines(dest + 1, 0, line1 + num_lines, 0L);
+  
+*** ../vim-7.3.361/src/version.c	2011-11-30 15:40:51.000000000 +0100
+--- src/version.c	2011-11-30 17:01:07.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     362,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+218. Your spouse hands you a gift wrapped magnet with your PC's name
+     on it and you accuse him or her of genocide.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.363 b/source/ap/vim/patches/7.3.363
new file mode 100644
index 00000000..10ab5482
--- /dev/null
+++ b/source/ap/vim/patches/7.3.363
@@ -0,0 +1,110 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.363
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.363
+Problem:    C indenting is wrong after #endif followed by a semicolon.
+Solution:   Add special handling for a semicolon in a line by itself. (Lech
+	    Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.362/src/misc1.c	2011-11-30 13:03:24.000000000 +0100
+--- src/misc1.c	2011-11-30 17:10:59.000000000 +0100
+***************
+*** 8143,8148 ****
+--- 8143,8171 ----
+  		    break;
+  
+  		/*
++ 		 * Find a line only has a semicolon that belongs to a previous
++ 		 * line ending in '}', e.g. before an #endif.  Don't increase
++ 		 * indent then.
++ 		 */
++ 		if (*(look = skipwhite(l)) == ';' && cin_nocode(look + 1))
++ 		{
++ 		    pos_T curpos_save = curwin->w_cursor;
++ 
++ 		    while (curwin->w_cursor.lnum > 1)
++ 		    {
++ 			look = ml_get(--curwin->w_cursor.lnum);
++ 			if (!(cin_nocode(look) || cin_ispreproc_cont(
++ 					      &look, &curwin->w_cursor.lnum)))
++ 			    break;
++ 		    }
++ 		    if (curwin->w_cursor.lnum > 0
++ 				    && cin_ends_in(look, (char_u *)"}", NULL))
++ 			break;
++ 
++ 		    curwin->w_cursor = curpos_save;
++ 		}
++ 
++ 		/*
+  		 * If the PREVIOUS line is a function declaration, the current
+  		 * line (and the ones that follow) needs to be indented as
+  		 * parameters.
+*** ../vim-7.3.362/src/testdir/test3.in	2011-10-04 18:03:43.000000000 +0200
+--- src/testdir/test3.in	2011-11-30 17:05:20.000000000 +0100
+***************
+*** 1454,1459 ****
+--- 1454,1469 ----
+  		printf("This line used to be indented incorrectly.\n");
+  }
+  
++ int foo[]
++ #ifdef BAR
++ 
++ = { 1, 2, 3,
++ 	4, 5, 6 }
++ 
++ #endif
++ ;
++ 	int baz;
++ 
+  void func3(void)
+  {
+  	int tab[] = {
+*** ../vim-7.3.362/src/testdir/test3.ok	2011-10-04 18:03:43.000000000 +0200
+--- src/testdir/test3.ok	2011-11-30 17:05:20.000000000 +0100
+***************
+*** 1307,1312 ****
+--- 1307,1322 ----
+  	printf("This line used to be indented incorrectly.\n");
+  }
+  
++ int foo[]
++ #ifdef BAR
++ 
++ = { 1, 2, 3,
++ 	4, 5, 6 }
++ 
++ #endif
++ 	;
++ int baz;
++ 
+  void func3(void)
+  {
+  	int tab[] = {
+*** ../vim-7.3.362/src/version.c	2011-11-30 17:01:55.000000000 +0100
+--- src/version.c	2011-11-30 17:06:57.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     363,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+220. Your wife asks for sex and you tell her where to find you on IRC.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.364 b/source/ap/vim/patches/7.3.364
new file mode 100644
index 00000000..e62ef76d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.364
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.364
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.364 (after 7.3.353)
+Problem:    Can't compile on HP-UX. (John Marriott)
+Solution:   Only use TTYM_URXVT when it is defined.
+Files:	    src/term.c
+
+
+*** ../vim-7.3.363/src/term.c	2011-11-30 14:47:12.000000000 +0100
+--- src/term.c	2011-12-01 20:53:57.000000000 +0100
+***************
+*** 4060,4066 ****
+  		    if (tp[1 + (tp[0] != CSI)] == '>' && j == 2)
+  		    {
+  			/* if xterm version >= 95 use mouse dragging */
+! 			if (extra >= 95 && ttym_flags != TTYM_URXVT)
+  			    set_option_value((char_u *)"ttym", 0L,
+  						       (char_u *)"xterm2", 0);
+  			/* if xterm version >= 141 try to get termcap codes */
+--- 4060,4070 ----
+  		    if (tp[1 + (tp[0] != CSI)] == '>' && j == 2)
+  		    {
+  			/* if xterm version >= 95 use mouse dragging */
+! 			if (extra >= 95
+! # ifdef TTYM_URXVT
+! 				&& ttym_flags != TTYM_URXVT
+! # endif
+! 				)
+  			    set_option_value((char_u *)"ttym", 0L,
+  						       (char_u *)"xterm2", 0);
+  			/* if xterm version >= 141 try to get termcap codes */
+*** ../vim-7.3.363/src/version.c	2011-11-30 17:20:18.000000000 +0100
+--- src/version.c	2011-12-01 20:56:55.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     364,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+224. You set up your own Web page. You set up a Web page for each
+     of your kids... and your pets.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.365 b/source/ap/vim/patches/7.3.365
new file mode 100644
index 00000000..16d5ad1b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.365
@@ -0,0 +1,131 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.365
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.365
+Problem:    Crash when using a large Unicode character in a file that has
+	    syntax highlighting. (ngollan)
+Solution:   Check for going past the end of the utf tables. (Dominique Pelle)
+Files:	    src/mbyte.c
+
+
+*** ../vim-7.3.364/src/mbyte.c	2011-08-10 13:21:30.000000000 +0200
+--- src/mbyte.c	2011-12-08 15:09:13.000000000 +0100
+***************
+*** 2764,2782 ****
+      int			tableSize;
+  {
+      int start, mid, end; /* indices into table */
+  
+      start = 0;
+!     end = tableSize / sizeof(convertStruct);
+      while (start < end)
+      {
+  	/* need to search further */
+! 	mid = (end + start) /2;
+  	if (table[mid].rangeEnd < a)
+  	    start = mid + 1;
+  	else
+  	    end = mid;
+      }
+!     if (table[start].rangeStart <= a && a <= table[start].rangeEnd
+  	    && (a - table[start].rangeStart) % table[start].step == 0)
+  	return (a + table[start].offset);
+      else
+--- 2764,2785 ----
+      int			tableSize;
+  {
+      int start, mid, end; /* indices into table */
++     int entries = tableSize / sizeof(convertStruct);
+  
+      start = 0;
+!     end = entries;
+      while (start < end)
+      {
+  	/* need to search further */
+! 	mid = (end + start) / 2;
+  	if (table[mid].rangeEnd < a)
+  	    start = mid + 1;
+  	else
+  	    end = mid;
+      }
+!     if (start < entries
+! 	    && table[start].rangeStart <= a
+! 	    && a <= table[start].rangeEnd
+  	    && (a - table[start].rangeStart) % table[start].step == 0)
+  	return (a + table[start].offset);
+      else
+***************
+*** 2791,2797 ****
+  utf_fold(a)
+      int		a;
+  {
+!     return utf_convert(a, foldCase, sizeof(foldCase));
+  }
+  
+  static convertStruct toLower[] =
+--- 2794,2800 ----
+  utf_fold(a)
+      int		a;
+  {
+!     return utf_convert(a, foldCase, (int)sizeof(foldCase));
+  }
+  
+  static convertStruct toLower[] =
+***************
+*** 3119,3125 ****
+  	return TOUPPER_LOC(a);
+  
+      /* For any other characters use the above mapping table. */
+!     return utf_convert(a, toUpper, sizeof(toUpper));
+  }
+  
+      int
+--- 3122,3128 ----
+  	return TOUPPER_LOC(a);
+  
+      /* For any other characters use the above mapping table. */
+!     return utf_convert(a, toUpper, (int)sizeof(toUpper));
+  }
+  
+      int
+***************
+*** 3152,3158 ****
+  	return TOLOWER_LOC(a);
+  
+      /* For any other characters use the above mapping table. */
+!     return utf_convert(a, toLower, sizeof(toLower));
+  }
+  
+      int
+--- 3155,3161 ----
+  	return TOLOWER_LOC(a);
+  
+      /* For any other characters use the above mapping table. */
+!     return utf_convert(a, toLower, (int)sizeof(toLower));
+  }
+  
+      int
+*** ../vim-7.3.364/src/version.c	2011-12-01 20:59:16.000000000 +0100
+--- src/version.c	2011-12-08 15:07:53.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     365,
+  /**/
+
+-- 
+Hear about the guy who played a blank tape at full blast?
+The mime next door went nuts.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.366 b/source/ap/vim/patches/7.3.366
new file mode 100644
index 00000000..ddf39903
--- /dev/null
+++ b/source/ap/vim/patches/7.3.366
@@ -0,0 +1,76 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.366
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.366
+Problem:    A tags file with an extremely long name causes errors.
+Solution:   Ignore tags that are too long. (Arno Renevier)
+Files:	    src/tag.c
+
+
+*** ../vim-7.3.365/src/tag.c	2011-10-12 19:53:31.000000000 +0200
+--- src/tag.c	2011-12-08 13:32:51.000000000 +0100
+***************
+*** 1906,1917 ****
+  		tagp.tagname = lbuf;
+  #ifdef FEAT_TAG_ANYWHITE
+  		tagp.tagname_end = skiptowhite(lbuf);
+! 		if (*tagp.tagname_end == NUL)	    /* corrupted tag line */
+  #else
+  		tagp.tagname_end = vim_strchr(lbuf, TAB);
+! 		if (tagp.tagname_end == NULL)	    /* corrupted tag line */
+  #endif
+  		{
+  		    line_error = TRUE;
+  		    break;
+  		}
+--- 1906,1931 ----
+  		tagp.tagname = lbuf;
+  #ifdef FEAT_TAG_ANYWHITE
+  		tagp.tagname_end = skiptowhite(lbuf);
+! 		if (*tagp.tagname_end == NUL)
+  #else
+  		tagp.tagname_end = vim_strchr(lbuf, TAB);
+! 		if (tagp.tagname_end == NULL)
+  #endif
+  		{
++ 		    if (vim_strchr(lbuf, NL) == NULL)
++ 		    {
++ 			/* Truncated line, ignore it.  Has been reported for
++ 			 * Mozilla JS with extremely long names. */
++ 			if (p_verbose >= 5)
++ 			{
++ 			    verbose_enter();
++ 			    MSG(_("Ignoring long line in tags file"));
++ 			    verbose_leave();
++ 			}
++ 			continue;
++ 		    }
++ 
++ 		    /* Corrupted tag line. */
+  		    line_error = TRUE;
+  		    break;
+  		}
+*** ../vim-7.3.365/src/version.c	2011-12-08 15:09:46.000000000 +0100
+--- src/version.c	2011-12-08 15:11:10.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     366,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+246. You use up your free 100 hours in less than a week.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.367 b/source/ap/vim/patches/7.3.367
new file mode 100644
index 00000000..2452d531
--- /dev/null
+++ b/source/ap/vim/patches/7.3.367
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.367
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.367
+Problem:    :wundo and :rundo use a wrong checksum.
+Solution:   Include the last line when computing the hash. (Christian Brabandt)
+Files:	    src/undo.c
+
+
+*** ../vim-7.3.366/src/undo.c	2011-01-22 21:25:07.000000000 +0100
+--- src/undo.c	2011-12-08 14:19:03.000000000 +0100
+***************
+*** 719,725 ****
+      char_u		*p;
+  
+      sha256_start(&ctx);
+!     for (lnum = 1; lnum < curbuf->b_ml.ml_line_count; ++lnum)
+      {
+  	p = ml_get(lnum);
+  	sha256_update(&ctx, p, (UINT32_T)(STRLEN(p) + 1));
+--- 719,725 ----
+      char_u		*p;
+  
+      sha256_start(&ctx);
+!     for (lnum = 1; lnum <= curbuf->b_ml.ml_line_count; ++lnum)
+      {
+  	p = ml_get(lnum);
+  	sha256_update(&ctx, p, (UINT32_T)(STRLEN(p) + 1));
+*** ../vim-7.3.366/src/version.c	2011-12-08 15:12:08.000000000 +0100
+--- src/version.c	2011-12-08 15:13:32.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     367,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+247. You use www.switchboard.com instead of dialing 411 and 555-12-12
+     for directory assistance.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.368 b/source/ap/vim/patches/7.3.368
new file mode 100644
index 00000000..958c69e7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.368
@@ -0,0 +1,103 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.368
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.368
+Problem:    Gcc complains about redefining _FORTIFY_SOURCE.
+Solution:   Undefine it before redefining it.
+Files:	    src/Makefile, src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.367/src/Makefile	2011-10-20 16:35:25.000000000 +0200
+--- src/Makefile	2011-12-08 15:16:13.000000000 +0100
+***************
+*** 561,568 ****
+  #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
+  
+  # Use this with GCC to check for mistakes, unused arguments, etc.
+! #CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -D_FORTIFY_SOURCE=1
+! #CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -D_FORTIFY_SOURCE=1 -DU_DEBUG
+  #PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers
+  #MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter
+  
+--- 561,568 ----
+  #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
+  
+  # Use this with GCC to check for mistakes, unused arguments, etc.
+! #CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1
+! #CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG
+  #PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers
+  #MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter
+  
+*** ../vim-7.3.367/src/configure.in	2011-09-02 12:27:20.000000000 +0200
+--- src/configure.in	2011-12-01 20:23:22.000000000 +0100
+***************
+*** 3584,3592 ****
+    dnl -D_FORTIFY_SOURCE=2 crashes Vim on strcpy(buf, "000") when buf is
+    dnl declared as char x[1] but actually longer.  Introduced in gcc 4.0.
+    dnl Also remove duplicate _FORTIFY_SOURCE arguments.
+    AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1)
+    if test "$gccmajor" -gt "3"; then
+!     CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -D_FORTIFY_SOURCE=1/'`
+      AC_MSG_RESULT(yes)
+    else
+      AC_MSG_RESULT(no)
+--- 3584,3593 ----
+    dnl -D_FORTIFY_SOURCE=2 crashes Vim on strcpy(buf, "000") when buf is
+    dnl declared as char x[1] but actually longer.  Introduced in gcc 4.0.
+    dnl Also remove duplicate _FORTIFY_SOURCE arguments.
++   dnl And undefine it first to avoid a warning.
+    AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1)
+    if test "$gccmajor" -gt "3"; then
+!     CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1/'`
+      AC_MSG_RESULT(yes)
+    else
+      AC_MSG_RESULT(no)
+*** ../vim-7.3.367/src/auto/configure	2011-09-02 12:27:20.000000000 +0200
+--- src/auto/configure	2011-12-01 20:24:02.000000000 +0100
+***************
+*** 12483,12492 ****
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+  $as_echo "no" >&6; }
+    fi
+!         { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we need -D_FORTIFY_SOURCE=1" >&5
+  $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; }
+    if test "$gccmajor" -gt "3"; then
+!     CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -D_FORTIFY_SOURCE=1/'`
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+  $as_echo "yes" >&6; }
+    else
+--- 12483,12492 ----
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+  $as_echo "no" >&6; }
+    fi
+!           { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we need -D_FORTIFY_SOURCE=1" >&5
+  $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; }
+    if test "$gccmajor" -gt "3"; then
+!     CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1/'`
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+  $as_echo "yes" >&6; }
+    else
+*** ../vim-7.3.367/src/version.c	2011-12-08 15:14:04.000000000 +0100
+--- src/version.c	2011-12-08 15:15:13.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     368,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+248. You sign your letters with your e-mail address instead of your name.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.369 b/source/ap/vim/patches/7.3.369
new file mode 100644
index 00000000..af6e7e6e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.369
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.369
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.369
+Problem:    When compiled with Gnome get an error message when using --help.
+Solution:   Don't fork. (Ivan Krasilnikov)
+Files:	    src/main.c
+
+
+*** ../vim-7.3.368/src/main.c	2011-10-04 16:43:49.000000000 +0200
+--- src/main.c	2011-12-01 20:27:11.000000000 +0100
+***************
+*** 3294,3300 ****
+--- 3294,3303 ----
+  #ifdef FEAT_GUI_GNOME
+      /* Gnome gives extra messages for --help if we continue, but not for -h. */
+      if (gui.starting)
++     {
+  	mch_msg("\n");
++ 	gui.dofork = FALSE;
++     }
+      else
+  #endif
+  	mch_exit(0);
+*** ../vim-7.3.368/src/version.c	2011-12-08 15:17:28.000000000 +0100
+--- src/version.c	2011-12-08 15:57:03.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     369,
+  /**/
+
+-- 
+Vi is clearly superior to emacs, since "vi" has only two characters
+(and two keystrokes), while "emacs" has five.  (Randy C. Ford)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.370 b/source/ap/vim/patches/7.3.370
new file mode 100644
index 00000000..26bce4d1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.370
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.370
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.370
+Problem:    Compiler warns for unused variable in Lua interface.
+Solution:   Remove the variable.
+Files:	    src/if_lua.c
+
+
+*** ../vim-7.3.369/src/if_lua.c	2011-09-21 17:15:34.000000000 +0200
+--- src/if_lua.c	2011-12-01 20:19:17.000000000 +0100
+***************
+*** 1044,1056 ****
+      static int
+  luaV_open(lua_State *L)
+  {
+-     luaV_Buffer *b;
+      char_u *s = NULL;
+  #ifdef HAVE_SANDBOX
+      luaV_checksandbox(L);
+  #endif
+      if (lua_isstring(L, 1)) s = (char_u *) lua_tostring(L, 1);
+!     b = luaV_pushbuffer(L, buflist_new(s, NULL, 1L, BLN_LISTED));
+      return 1;
+  }
+  
+--- 1044,1055 ----
+      static int
+  luaV_open(lua_State *L)
+  {
+      char_u *s = NULL;
+  #ifdef HAVE_SANDBOX
+      luaV_checksandbox(L);
+  #endif
+      if (lua_isstring(L, 1)) s = (char_u *) lua_tostring(L, 1);
+!     luaV_pushbuffer(L, buflist_new(s, NULL, 1L, BLN_LISTED));
+      return 1;
+  }
+  
+*** ../vim-7.3.369/src/version.c	2011-12-08 15:57:54.000000000 +0100
+--- src/version.c	2011-12-08 15:59:35.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     370,
+  /**/
+
+-- 
+Emacs is a nice OS - but it lacks a good text editor.
+That's why I am using Vim.  --Anonymous
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.371 b/source/ap/vim/patches/7.3.371
new file mode 100644
index 00000000..1701c118
--- /dev/null
+++ b/source/ap/vim/patches/7.3.371
@@ -0,0 +1,75 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.371
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.371
+Problem:    Crash in autocomplete. (Greg Weber)
+Solution:   Check not going over allocated buffer size.
+Files:	    src/misc2.c
+
+
+*** ../vim-7.3.370/src/misc2.c	2011-10-26 11:40:56.000000000 +0200
+--- src/misc2.c	2011-12-08 17:49:23.000000000 +0100
+***************
+*** 4293,4298 ****
+--- 4293,4300 ----
+  static int ff_path_in_stoplist __ARGS((char_u *, int, char_u **));
+  #endif
+  
++ static char_u e_pathtoolong[] = N_("E854: path too long for completion");
++ 
+  #if 0
+  /*
+   * if someone likes findfirst/findnext, here are the functions
+***************
+*** 4589,4594 ****
+--- 4591,4601 ----
+  	len = 0;
+  	while (*wc_part != NUL)
+  	{
++ 	    if (len + 5 >= MAXPATHL)
++ 	    {
++ 		EMSG(_(e_pathtoolong));
++ 		break;
++ 	    }
+  	    if (STRNCMP(wc_part, "**", 2) == 0)
+  	    {
+  		ff_expand_buffer[len++] = *wc_part++;
+***************
+*** 4634,4639 ****
+--- 4641,4652 ----
+      }
+  
+      /* create an absolute path */
++     if (STRLEN(search_ctx->ffsc_start_dir)
++ 			  + STRLEN(search_ctx->ffsc_fix_path) + 3 >= MAXPATHL)
++     {
++ 	EMSG(_(e_pathtoolong));
++ 	goto error_return;
++     }
+      STRCPY(ff_expand_buffer, search_ctx->ffsc_start_dir);
+      add_pathsep(ff_expand_buffer);
+      STRCAT(ff_expand_buffer, search_ctx->ffsc_fix_path);
+*** ../vim-7.3.370/src/version.c	2011-12-08 16:00:12.000000000 +0100
+--- src/version.c	2011-12-08 17:46:41.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     371,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+253. You wait for a slow loading web page before going to the toilet.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.372 b/source/ap/vim/patches/7.3.372
new file mode 100644
index 00000000..c9978c31
--- /dev/null
+++ b/source/ap/vim/patches/7.3.372
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.372
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.372
+Problem:    When using a command line mapping to <Up> with file name 
+            completion to go one directory up, 'wildchar' is inserted.
+            (Yasuhiro Matsumoto) 
+Solution:   Set the KeyTyped flag.
+Files:      src/ex_getln.c
+
+
+*** ../vim-7.3.371/src/ex_getln.c	2011-10-26 22:02:10.000000000 +0200
+--- src/ex_getln.c	2011-12-08 18:40:49.000000000 +0100
+***************
+*** 645,651 ****
+--- 645,655 ----
+  		}
+  		else if (ccline.cmdpos > i)
+  		    cmdline_del(i);
++ 
++ 		/* Now complete in the new directory. Set KeyTyped in case the
++ 		 * Up key came from a mapping. */
+  		c = p_wc;
++ 		KeyTyped = TRUE;
+  	    }
+  	}
+  
+*** ../vim-7.3.371/src/version.c	2011-12-08 17:49:31.000000000 +0100
+--- src/version.c	2011-12-08 18:42:54.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     372,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+255. You work for a newspaper and your editor asks you to write an
+     article about Internet addiction...in the "first person."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.373 b/source/ap/vim/patches/7.3.373
new file mode 100644
index 00000000..3e8937a0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.373
@@ -0,0 +1,78 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.373
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.373 (after 7.3.366)
+Problem:    A tags file with an extremely long name may cause an infinite loop.
+Solution:   When encountering a long name switch to linear search.
+Files:	    src/tag.c
+
+
+*** ../vim-7.3.372/src/tag.c	2011-12-08 15:12:08.000000000 +0100
+--- src/tag.c	2011-12-14 14:13:28.000000000 +0100
+***************
+*** 1854,1860 ****
+  
+  		if (state == TS_BINARY && orgpat.regmatch.rm_ic && !sortic)
+  		{
+! 		    /* binary search won't work for ignoring case, use linear
+  		     * search. */
+  		    linear = TRUE;
+  		    state = TS_LINEAR;
+--- 1854,1860 ----
+  
+  		if (state == TS_BINARY && orgpat.regmatch.rm_ic && !sortic)
+  		{
+! 		    /* Binary search won't work for ignoring case, use linear
+  		     * search. */
+  		    linear = TRUE;
+  		    state = TS_LINEAR;
+***************
+*** 1922,1927 ****
+--- 1922,1940 ----
+  			    MSG(_("Ignoring long line in tags file"));
+  			    verbose_leave();
+  			}
++ #ifdef FEAT_TAG_BINS
++ 			if (state != TS_LINEAR)
++ 			{
++ 			    /* Avoid getting stuck. */
++ 			    linear = TRUE;
++ 			    state = TS_LINEAR;
++ # ifdef HAVE_FSEEKO
++ 			    fseeko(fp, search_info.low_offset, SEEK_SET);
++ # else
++ 			    fseek(fp, (long)search_info.low_offset, SEEK_SET);
++ # endif
++ 			}
++ #endif
+  			continue;
+  		    }
+  
+*** ../vim-7.3.372/src/version.c	2011-12-08 18:44:47.000000000 +0100
+--- src/version.c	2011-12-14 14:12:06.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     373,
+  /**/
+
+-- 
+ZOOT:  I'm afraid our life must seem very dull and quiet compared to yours.
+       We are but eightscore young blondes, all between sixteen and
+       nineteen-and-a-half, cut off in this castle, with no one to protect us.
+       Oooh.  It is a lonely life ... bathing ...  dressing ... undressing ...
+       making exciting underwear....
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.374 b/source/ap/vim/patches/7.3.374
new file mode 100644
index 00000000..b312828a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.374
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.374
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.374
+Problem:    ++encoding does not work properly.
+Solution:   Recognize ++encoding before ++enc. (Charles Cooper)
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.373/src/ex_docmd.c	2011-10-20 21:58:20.000000000 +0200
+--- src/ex_docmd.c	2011-12-14 14:46:05.000000000 +0100
+***************
+*** 4840,4851 ****
+  #ifdef FEAT_MBYTE
+      else if (STRNCMP(arg, "enc", 3) == 0)
+      {
+! 	arg += 3;
+! 	pp = &eap->force_enc;
+!     }
+!     else if (STRNCMP(arg, "encoding", 8) == 0)
+!     {
+! 	arg += 8;
+  	pp = &eap->force_enc;
+      }
+      else if (STRNCMP(arg, "bad", 3) == 0)
+--- 4840,4849 ----
+  #ifdef FEAT_MBYTE
+      else if (STRNCMP(arg, "enc", 3) == 0)
+      {
+! 	if (STRNCMP(arg, "encoding", 8) == 0)
+! 	    arg += 8;
+! 	else
+! 	    arg += 3;
+  	pp = &eap->force_enc;
+      }
+      else if (STRNCMP(arg, "bad", 3) == 0)
+*** ../vim-7.3.373/src/version.c	2011-12-14 14:15:12.000000000 +0100
+--- src/version.c	2011-12-14 14:44:01.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     374,
+  /**/
+
+-- 
+Linux is just like a wigwam: no Windows, no Gates and an Apache inside.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.375 b/source/ap/vim/patches/7.3.375
new file mode 100644
index 00000000..6f15fea1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.375
@@ -0,0 +1,64 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.375
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.375
+Problem:    Duplicate return statement.
+Solution:   Remove the superfluous one. (Dominique Pelle)
+Files:	    src/gui_mac.c
+
+
+*** ../vim-7.3.374/src/gui_mac.c	2011-06-19 01:14:22.000000000 +0200
+--- src/gui_mac.c	2011-12-10 17:20:59.000000000 +0100
+***************
+*** 3216,3222 ****
+  {
+      /* TODO:
+       * This proc is called when Normal is set to a value
+!      * so what msut be done? I don't know
+       */
+  }
+  
+--- 3216,3222 ----
+  {
+      /* TODO:
+       * This proc is called when Normal is set to a value
+!      * so what must be done? I don't know
+       */
+  }
+  
+***************
+*** 3303,3309 ****
+      *x = bounds.left;
+      *y = bounds.top;
+      return OK;
+-     return FAIL;
+  }
+  
+  /*
+--- 3303,3308 ----
+*** ../vim-7.3.374/src/version.c	2011-12-14 14:49:41.000000000 +0100
+--- src/version.c	2011-12-14 15:06:01.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     375,
+  /**/
+
+-- 
+GALAHAD: No look, really, this isn't nescess ...
+PIGLET:  We must examine you.
+GALAHAD: There's nothing wrong with ... that.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.376 b/source/ap/vim/patches/7.3.376
new file mode 100644
index 00000000..1e20743e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.376
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.376
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.376
+Problem:    Win32: Toolbar repainting does not work when the mouse pointer
+	    hovers over a button.
+Solution:   Call DefWindowProc() when not handling an event. (Sergiu Dotenco)
+Files:	    src/gui_w32.c
+
+
+*** ../vim-7.3.375/src/gui_w32.c	2011-08-10 17:07:56.000000000 +0200
+--- src/gui_w32.c	2011-12-14 15:14:48.000000000 +0100
+***************
+*** 1101,1107 ****
+  	return MyWindowProc(hwnd, uMsg, wParam, lParam);
+      }
+  
+!     return 1;
+  }
+  
+  /*
+--- 1101,1107 ----
+  	return MyWindowProc(hwnd, uMsg, wParam, lParam);
+      }
+  
+!     return DefWindowProc(hwnd, uMsg, wParam, lParam);
+  }
+  
+  /*
+*** ../vim-7.3.375/src/version.c	2011-12-14 15:07:11.000000000 +0100
+--- src/version.c	2011-12-14 15:23:10.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     376,
+  /**/
+
+-- 
+   GALAHAD hurries to the door and pushes through it.  As he leaves the room
+   we CUT TO the reverse to show that he is now in a room full of bathing
+   and romping GIRLIES, all innocent, wide-eyed and beautiful.  They smile
+   enchantingly at him as he tries to keep walking without being diverted by
+   the lovely sights assaulting his eyeballs.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.377 b/source/ap/vim/patches/7.3.377
new file mode 100644
index 00000000..1a2df1d5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.377
@@ -0,0 +1,406 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.377
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.377
+Problem:    No support for bitwise AND, OR, XOR and invert.
+Solution:   Add and(), or(), invert() and xor() functions.
+Files:	    src/eval.c, src/testdir/test49.in, src/testdir/test65.in,
+	    src/testdir/test65.ok, runtime/doc/eval.txt
+
+
+*** ../vim-7.3.376/src/eval.c	2011-11-30 15:19:25.000000000 +0100
+--- src/eval.c	2011-12-11 13:49:31.000000000 +0100
+***************
+*** 474,479 ****
+--- 474,480 ----
+  static void f_acos __ARGS((typval_T *argvars, typval_T *rettv));
+  #endif
+  static void f_add __ARGS((typval_T *argvars, typval_T *rettv));
++ static void f_and __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_append __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_argc __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_argidx __ARGS((typval_T *argvars, typval_T *rettv));
+***************
+*** 602,607 ****
+--- 603,609 ----
+  static void f_inputsave __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_inputsecret __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_insert __ARGS((typval_T *argvars, typval_T *rettv));
++ static void f_invert __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_isdirectory __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_islocked __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_items __ARGS((typval_T *argvars, typval_T *rettv));
+***************
+*** 640,645 ****
+--- 642,648 ----
+  #endif
+  static void f_nextnonblank __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_nr2char __ARGS((typval_T *argvars, typval_T *rettv));
++ static void f_or __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_pathshorten __ARGS((typval_T *argvars, typval_T *rettv));
+  #ifdef FEAT_FLOAT
+  static void f_pow __ARGS((typval_T *argvars, typval_T *rettv));
+***************
+*** 751,756 ****
+--- 754,760 ----
+  static void f_winsaveview __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_winwidth __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_writefile __ARGS((typval_T *argvars, typval_T *rettv));
++ static void f_xor __ARGS((typval_T *argvars, typval_T *rettv));
+  
+  static int list2fpos __ARGS((typval_T *arg, pos_T *posp, int *fnump));
+  static pos_T *var2fpos __ARGS((typval_T *varp, int dollar_lnum, int *fnum));
+***************
+*** 7715,7720 ****
+--- 7719,7725 ----
+      {"acos",		1, 1, f_acos},	/* WJMc */
+  #endif
+      {"add",		2, 2, f_add},
++     {"and",		2, 2, f_and},
+      {"append",		2, 2, f_append},
+      {"argc",		0, 0, f_argc},
+      {"argidx",		0, 0, f_argidx},
+***************
+*** 7850,7855 ****
+--- 7855,7861 ----
+      {"inputsave",	0, 0, f_inputsave},
+      {"inputsecret",	1, 2, f_inputsecret},
+      {"insert",		2, 3, f_insert},
++     {"invert",		1, 1, f_invert},
+      {"isdirectory",	1, 1, f_isdirectory},
+      {"islocked",	1, 1, f_islocked},
+      {"items",		1, 1, f_items},
+***************
+*** 7888,7893 ****
+--- 7894,7900 ----
+  #endif
+      {"nextnonblank",	1, 1, f_nextnonblank},
+      {"nr2char",		1, 1, f_nr2char},
++     {"or",		2, 2, f_or},
+      {"pathshorten",	1, 1, f_pathshorten},
+  #ifdef FEAT_FLOAT
+      {"pow",		2, 2, f_pow},
+***************
+*** 7999,8004 ****
+--- 8006,8012 ----
+      {"winsaveview",	0, 0, f_winsaveview},
+      {"winwidth",	1, 1, f_winwidth},
+      {"writefile",	2, 3, f_writefile},
++     {"xor",		2, 2, f_xor},
+  };
+  
+  #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
+***************
+*** 8572,8577 ****
+--- 8580,8597 ----
+  }
+  
+  /*
++  * "and(expr, expr)" function
++  */
++     static void
++ f_and(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     rettv->vval.v_number = get_tv_number_chk(&argvars[0], NULL)
++ 					& get_tv_number_chk(&argvars[1], NULL);
++ }
++ 
++ /*
+   * "append(lnum, string/list)" function
+   */
+      static void
+***************
+*** 12958,12963 ****
+--- 12978,12994 ----
+  }
+  
+  /*
++  * "invert(expr)" function
++  */
++     static void
++ f_invert(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     rettv->vval.v_number = ~get_tv_number_chk(&argvars[0], NULL);
++ }
++ 
++ /*
+   * "isdirectory()" function
+   */
+      static void
+***************
+*** 14108,14113 ****
+--- 14139,14156 ----
+  }
+  
+  /*
++  * "or(expr, expr)" function
++  */
++     static void
++ f_or(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     rettv->vval.v_number = get_tv_number_chk(&argvars[0], NULL)
++ 					| get_tv_number_chk(&argvars[1], NULL);
++ }
++ 
++ /*
+   * "pathshorten()" function
+   */
+      static void
+***************
+*** 18394,18399 ****
+--- 18437,18455 ----
+  }
+  
+  /*
++  * "xor(expr, expr)" function
++  */
++     static void
++ f_xor(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     rettv->vval.v_number = get_tv_number_chk(&argvars[0], NULL)
++ 					^ get_tv_number_chk(&argvars[1], NULL);
++ }
++ 
++ 
++ /*
+   * Translate a String variable into a position.
+   * Returns NULL when there is an error.
+   */
+*** ../vim-7.3.376/src/testdir/test65.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test65.in	2011-12-11 13:55:06.000000000 +0100
+***************
+*** 1,4 ****
+! Test for floating point.
+  
+  STARTTEST
+  :so small.vim
+--- 1,4 ----
+! Test for floating point and logical operators.
+  
+  STARTTEST
+  :so small.vim
+***************
+*** 72,77 ****
+--- 72,94 ----
+  :$put ='float2nr'
+  :$put =float2nr(123.456)
+  :$put =float2nr(-123.456)
++ :$put ='AND'
++ :$put =and(127, 127)
++ :$put =and(127, 16)
++ :$put =and(127, 128)
++ :$put ='OR'
++ :$put =or(16, 7)
++ :$put =or(8, 7)
++ :$put =or(0, 123)
++ :$put ='XOR'
++ :$put =xor(127, 127)
++ :$put =xor(127, 16)
++ :$put =xor(127, 128)
++ :$put ='invert'
++ :$put =and(invert(127), 65535)
++ :$put =and(invert(16), 65535)
++ :$put =and(invert(128), 65535)
++ :$put =invert(1.0)
+  :/^Results/,$wq! test.out
+  ENDTEST
+  
+*** ../vim-7.3.376/src/testdir/test65.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test65.ok	2011-12-11 13:55:30.000000000 +0100
+***************
+*** 54,56 ****
+--- 54,73 ----
+  float2nr
+  123
+  -123
++ AND
++ 127
++ 16
++ 0
++ OR
++ 23
++ 15
++ 123
++ XOR
++ 0
++ 111
++ 255
++ invert
++ 65408
++ 65519
++ 65407
++ 0
+*** ../vim-7.3.376/runtime/doc/eval.txt	2011-06-19 02:55:32.000000000 +0200
+--- runtime/doc/eval.txt	2011-12-14 15:28:23.000000000 +0100
+***************
+*** 798,808 ****
+  For |Lists| only "+" is possible and then both expr6 must be a list.  The
+  result is a new list with the two lists Concatenated.
+  
+! expr7 *	 expr7 ..	number multiplication			*expr-star*
+! expr7 /	 expr7 ..	number division				*expr-/*
+! expr7 %	 expr7 ..	number modulo				*expr-%*
+  
+  For all, except ".", Strings are converted to Numbers.
+  
+  Note the difference between "+" and ".":
+  	"123" + "456" = 579
+--- 800,811 ----
+  For |Lists| only "+" is possible and then both expr6 must be a list.  The
+  result is a new list with the two lists Concatenated.
+  
+! expr7 *	 expr7 ..	Number multiplication			*expr-star*
+! expr7 /	 expr7 ..	Number division				*expr-/*
+! expr7 %	 expr7 ..	Number modulo				*expr-%*
+  
+  For all, except ".", Strings are converted to Numbers.
++ For bitwise operators see |and()|, |or()| and |xor()|.
+  
+  Note the difference between "+" and ".":
+  	"123" + "456" = 579
+***************
+*** 1679,1684 ****
+--- 1688,1694 ----
+  abs( {expr})			Float or Number  absolute value of {expr}
+  acos( {expr})			Float	arc cosine of {expr}
+  add( {list}, {item})		List	append {item} to |List| {list}
++ and( {expr}, {expr})		Number  bitwise AND
+  append( {lnum}, {string})	Number	append {string} below line {lnum}
+  append( {lnum}, {list})		Number	append lines {list} below line {lnum}
+  argc()				Number	number of files in the argument list
+***************
+*** 1817,1822 ****
+--- 1827,1833 ----
+  inputsave()			Number	save and clear typeahead
+  inputsecret( {prompt} [, {text}]) String  like input() but hiding the text
+  insert( {list}, {item} [, {idx}]) List	insert {item} in {list} [before {idx}]
++ invert( {expr})			Number  bitwise invert
+  isdirectory( {directory})	Number	TRUE if {directory} is a directory
+  islocked( {expr})		Number	TRUE if {expr} is locked
+  items( {dict})			List	key-value pairs in {dict}
+***************
+*** 1856,1861 ****
+--- 1868,1874 ----
+  mzeval( {expr})			any	evaluate |MzScheme| expression
+  nextnonblank( {lnum})		Number	line nr of non-blank line >= {lnum}
+  nr2char( {expr})		String	single char with ASCII value {expr}
++ or( {expr}, {expr})		Number  bitwise OR
+  pathshorten( {expr})		String	shorten directory names in a path
+  pow( {x}, {y})			Float	{x} to the power of {y}
+  prevnonblank( {lnum})		Number	line nr of non-blank line <= {lnum}
+***************
+*** 1978,1983 ****
+--- 1992,1998 ----
+  winwidth( {nr})			Number	width of window {nr}
+  writefile( {list}, {fname} [, {binary}])
+  				Number	write list of lines to file {fname}
++ xor( {expr}, {expr})		Number  bitwise XOR
+  
+  abs({expr})							*abs()*
+  		Return the absolute value of {expr}.  When {expr} evaluates to
+***************
+*** 2017,2022 ****
+--- 2032,2044 ----
+  		Use |insert()| to add an item at another position.
+  
+  
++ and({expr}, {expr})					*and()*
++ 		Bitwise AND on the two arguments.  The arguments are converted
++ 		to a number.  A List, Dict or Float argument causes an error.
++ 		Example: >
++ 			:let flag = and(bits, 0x80)
++ 
++ 
+  append({lnum}, {expr})					*append()*
+  		When {expr} is a |List|: Append each item of the |List| as a
+  		text line below line {lnum} in the current buffer.
+***************
+*** 3770,3775 ****
+--- 3798,3808 ----
+  		Note that when {item} is a |List| it is inserted as a single
+  		item.  Use |extend()| to concatenate |Lists|.
+  
++ invert({expr})						*invert()*
++ 		Bitwise invert.  The argument is converted to a number.  A
++ 		List, Dict or Float argument causes an error.  Example: >
++ 			:let bits = invert(bits)
++ 
+  isdirectory({directory})				*isdirectory()*
+  		The result is a Number, which is non-zero when a directory
+  		with the name {directory} exists.  If {directory} doesn't
+***************
+*** 4334,4339 ****
+--- 4368,4380 ----
+  			call setpos('.', save_cursor)
+  <		Also see |setpos()|.
+  
++ or({expr}, {expr})					*or()*
++ 		Bitwise OR on the two arguments.  The arguments are converted
++ 		to a number.  A List, Dict or Float argument causes an error.
++ 		Example: >
++ 			:let bits = or(bits, 0x80)
++ 
++ 
+  pathshorten({expr})					*pathshorten()*
+  		Shorten directory names in the path {expr} and return the
+  		result.  The tail, the file name, is kept as-is.  The other
+***************
+*** 6097,6103 ****
+  		To copy a file byte for byte: >
+  			:let fl = readfile("foo", "b")
+  			:call writefile(fl, "foocopy", "b")
+! <
+  
+  							*feature-list*
+  There are three types of features:
+--- 6149,6163 ----
+  		To copy a file byte for byte: >
+  			:let fl = readfile("foo", "b")
+  			:call writefile(fl, "foocopy", "b")
+! 
+! 
+! xor({expr}, {expr})					*xor()*
+! 		Bitwise XOR on the two arguments.  The arguments are converted
+! 		to a number.  A List, Dict or Float argument causes an error.
+! 		Example: >
+! 			:let bits = xor(bits, 0x80)
+! 
+! 
+  
+  							*feature-list*
+  There are three types of features:
+*** ../vim-7.3.376/src/version.c	2011-12-14 15:23:53.000000000 +0100
+--- src/version.c	2011-12-14 15:28:39.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     377,
+  /**/
+
+-- 
+DINGO: Wicked wicked Zoot ... she is a bad person and she must pay the
+       penalty.  And here in Castle Anthrax, we have but one punishment
+       ... you must tie her down on a bed ... and spank her.  Come!
+GIRLS: A spanking!  A spanking!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.378 b/source/ap/vim/patches/7.3.378
new file mode 100644
index 00000000..8ad3d703
--- /dev/null
+++ b/source/ap/vim/patches/7.3.378
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.378
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.378
+Problem:    When cross-compiling the check for uint32_t fails.
+Solution:   Only give a warning message. (Maksim Melnikau)
+Files:      src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.377/src/configure.in	2011-12-08 15:17:28.000000000 +0100
+--- src/configure.in	2011-12-14 19:18:36.000000000 +0100
+***************
+*** 3283,3289 ****
+  }],
+  AC_MSG_RESULT(ok),
+  AC_MSG_ERROR([WRONG!  uint32_t not defined correctly.]),
+! AC_MSG_ERROR([could not compile program using uint32_t.]))
+  
+  dnl Check for memmove() before bcopy(), makes memmove() be used when both are
+  dnl present, fixes problem with incompatibility between Solaris 2.4 and 2.5.
+--- 3283,3289 ----
+  }],
+  AC_MSG_RESULT(ok),
+  AC_MSG_ERROR([WRONG!  uint32_t not defined correctly.]),
+! AC_MSG_WARN([cannot check uint32_t when cross-compiling.]))
+  
+  dnl Check for memmove() before bcopy(), makes memmove() be used when both are
+  dnl present, fixes problem with incompatibility between Solaris 2.4 and 2.5.
+*** ../vim-7.3.377/src/auto/configure	2011-12-08 15:17:28.000000000 +0100
+--- src/auto/configure	2011-12-14 19:20:55.000000000 +0100
+***************
+*** 11777,11783 ****
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking uint32_t is 32 bits" >&5
+  $as_echo_n "checking uint32_t is 32 bits... " >&6; }
+  if test "$cross_compiling" = yes; then :
+!   as_fn_error "could not compile program using uint32_t." "$LINENO" 5
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  /* end confdefs.h.  */
+--- 11777,11784 ----
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking uint32_t is 32 bits" >&5
+  $as_echo_n "checking uint32_t is 32 bits... " >&6; }
+  if test "$cross_compiling" = yes; then :
+!   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check uint32_t when cross-compiling." >&5
+! $as_echo "$as_me: WARNING: cannot check uint32_t when cross-compiling." >&2;}
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  /* end confdefs.h.  */
+*** ../vim-7.3.377/src/version.c	2011-12-14 15:32:44.000000000 +0100
+--- src/version.c	2011-12-14 19:21:08.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     378,
+  /**/
+
+-- 
+            ### Hiroshima 45, Chernobyl 86, Windows 95 ###
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.379 b/source/ap/vim/patches/7.3.379
new file mode 100644
index 00000000..fd87f9a1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.379
@@ -0,0 +1,112 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.379
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.379
+Problem:    C-indenting wrong for static enum.
+Solution:   Skip over "static". (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.378/src/misc1.c	2011-11-30 17:20:18.000000000 +0100
+--- src/misc1.c	2011-12-14 19:37:48.000000000 +0100
+***************
+*** 5138,5143 ****
+--- 5138,5146 ----
+      if (STRNCMP(s, "typedef", 7) == 0 && !vim_isIDc(s[7]))
+  	s = cin_skipcomment(s + 7);
+  
++     if (STRNCMP(s, "static", 6) == 0 && !vim_isIDc(s[6]))
++ 	s = cin_skipcomment(s + 6);
++ 
+      if (STRNCMP(s, "enum", 4) == 0 && !vim_isIDc(s[4]))
+  	return TRUE;
+  
+*** ../vim-7.3.378/src/testdir/test3.in	2011-11-30 17:20:18.000000000 +0100
+--- src/testdir/test3.in	2011-12-14 20:03:11.000000000 +0100
+***************
+*** 299,316 ****
+  
+  enum soppie
+  {
+! 	yes = 0,
+! 	no,
+! 	maybe
+  };
+  
+  typedef enum soppie
+  {
+! 	yes = 0,
+! 	no,
+! 	maybe
+  };
+  
+  {
+  	int a,
+  		b;
+--- 299,323 ----
+  
+  enum soppie
+  {
+! yes = 0,
+! no,
+! maybe
+  };
+  
+  typedef enum soppie
+  {
+! yes = 0,
+! no,
+! maybe
+  };
+  
++ static enum
++ {
++ yes = 0,
++ no,
++ maybe
++ } soppie;
++ 
+  {
+  	int a,
+  		b;
+*** ../vim-7.3.378/src/testdir/test3.ok	2011-11-30 17:20:18.000000000 +0100
+--- src/testdir/test3.ok	2011-12-14 19:37:48.000000000 +0100
+***************
+*** 299,304 ****
+--- 299,311 ----
+  	maybe
+  };
+  
++ static enum
++ {
++ 	yes = 0,
++ 	no,
++ 	maybe
++ } soppie;
++ 
+  {
+  	int a,
+  		b;
+*** ../vim-7.3.378/src/version.c	2011-12-14 19:22:29.000000000 +0100
+--- src/version.c	2011-12-14 20:02:19.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     379,
+  /**/
+
+-- 
+You cannot propel yourself forward by patting yourself on the back.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.380 b/source/ap/vim/patches/7.3.380
new file mode 100644
index 00000000..a8f4bcf6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.380
@@ -0,0 +1,318 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.380
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.380
+Problem:    C-indenting wrong for a function header.
+Solution:   Skip to the start paren. (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.379/src/misc1.c	2011-12-14 20:05:17.000000000 +0100
+--- src/misc1.c	2011-12-14 20:16:43.000000000 +0100
+***************
+*** 4943,4949 ****
+  static int	cin_islinecomment __ARGS((char_u *));
+  static int	cin_isterminated __ARGS((char_u *, int, int));
+  static int	cin_isinit __ARGS((void));
+! static int	cin_isfuncdecl __ARGS((char_u **, linenr_T));
+  static int	cin_isif __ARGS((char_u *));
+  static int	cin_iselse __ARGS((char_u *));
+  static int	cin_isdo __ARGS((char_u *));
+--- 4943,4949 ----
+  static int	cin_islinecomment __ARGS((char_u *));
+  static int	cin_isterminated __ARGS((char_u *, int, int));
+  static int	cin_isinit __ARGS((void));
+! static int	cin_isfuncdecl __ARGS((char_u **, linenr_T, linenr_T, int, int));
+  static int	cin_isif __ARGS((char_u *));
+  static int	cin_iselse __ARGS((char_u *));
+  static int	cin_isdo __ARGS((char_u *));
+***************
+*** 5585,5605 ****
+   * "sp" points to a string with the line.  When looking at other lines it must
+   * be restored to the line.  When it's NULL fetch lines here.
+   * "lnum" is where we start looking.
+   */
+      static int
+! cin_isfuncdecl(sp, first_lnum)
+      char_u	**sp;
+      linenr_T	first_lnum;
+  {
+      char_u	*s;
+      linenr_T	lnum = first_lnum;
+      int		retval = FALSE;
+  
+      if (sp == NULL)
+  	s = ml_get(lnum);
+      else
+  	s = *sp;
+  
+      /* Ignore line starting with #. */
+      if (cin_ispreproc(s))
+  	return FALSE;
+--- 5585,5621 ----
+   * "sp" points to a string with the line.  When looking at other lines it must
+   * be restored to the line.  When it's NULL fetch lines here.
+   * "lnum" is where we start looking.
++  * "min_lnum" is the line before which we will not be looking.
+   */
+      static int
+! cin_isfuncdecl(sp, first_lnum, min_lnum, ind_maxparen, ind_maxcomment)
+      char_u	**sp;
+      linenr_T	first_lnum;
++     linenr_T	min_lnum;
++     int		ind_maxparen;
++     int		ind_maxcomment;
+  {
+      char_u	*s;
+      linenr_T	lnum = first_lnum;
+      int		retval = FALSE;
++     pos_T	*trypos;
++     int		just_started = TRUE;
+  
+      if (sp == NULL)
+  	s = ml_get(lnum);
+      else
+  	s = *sp;
+  
++     if (find_last_paren(s, '(', ')')
++ 	&& (trypos = find_match_paren(ind_maxparen, ind_maxcomment)) != NULL)
++     {
++ 	lnum = trypos->lnum;
++ 	if (lnum < min_lnum)
++ 	    return FALSE;
++ 
++ 	s = ml_get(lnum);
++     }
++ 
+      /* Ignore line starting with #. */
+      if (cin_ispreproc(s))
+  	return FALSE;
+***************
+*** 5650,5662 ****
+  	    /* Require a comma at end of the line or a comma or ')' at the
+  	     * start of next line. */
+  	    s = skipwhite(s);
+! 	    if (!comma && *s != ',' && *s != ')')
+  		break;
+  	}
+  	else if (cin_iscomment(s))	/* ignore comments */
+  	    s = cin_skipcomment(s);
+  	else
+  	    ++s;
+      }
+  
+  done:
+--- 5666,5682 ----
+  	    /* Require a comma at end of the line or a comma or ')' at the
+  	     * start of next line. */
+  	    s = skipwhite(s);
+! 	    if (!just_started && (!comma && *s != ',' && *s != ')'))
+  		break;
++ 	    just_started = FALSE;
+  	}
+  	else if (cin_iscomment(s))	/* ignore comments */
+  	    s = cin_skipcomment(s);
+  	else
++ 	{
+  	    ++s;
++ 	    just_started = FALSE;
++ 	}
+      }
+  
+  done:
+***************
+*** 7158,7164 ****
+  			 * (it's a variable declaration).
+  			 */
+  			if (start_brace != BRACE_IN_COL0
+! 				|| !cin_isfuncdecl(&l, curwin->w_cursor.lnum))
+  			{
+  			    /* if the line is terminated with another ','
+  			     * it is a continued variable initialization.
+--- 7178,7185 ----
+  			 * (it's a variable declaration).
+  			 */
+  			if (start_brace != BRACE_IN_COL0
+! 				|| !cin_isfuncdecl(&l, curwin->w_cursor.lnum,
+! 					     0, ind_maxparen, ind_maxcomment))
+  			{
+  			    /* if the line is terminated with another ','
+  			     * it is a continued variable initialization.
+***************
+*** 8019,8025 ****
+  		&& vim_strchr(theline, '}') == NULL
+  		&& !cin_ends_in(theline, (char_u *)":", NULL)
+  		&& !cin_ends_in(theline, (char_u *)",", NULL)
+! 		&& cin_isfuncdecl(NULL, cur_curpos.lnum + 1)
+  		&& !cin_isterminated(theline, FALSE, TRUE))
+  	{
+  	    amount = ind_func_type;
+--- 8040,8048 ----
+  		&& vim_strchr(theline, '}') == NULL
+  		&& !cin_ends_in(theline, (char_u *)":", NULL)
+  		&& !cin_ends_in(theline, (char_u *)",", NULL)
+! 		&& cin_isfuncdecl(NULL, cur_curpos.lnum + 1,
+! 				  cur_curpos.lnum + 1,
+! 				  ind_maxparen, ind_maxcomment)
+  		&& !cin_isterminated(theline, FALSE, TRUE))
+  	{
+  	    amount = ind_func_type;
+***************
+*** 8125,8131 ****
+  		 * If the line looks like a function declaration, and we're
+  		 * not in a comment, put it the left margin.
+  		 */
+! 		if (cin_isfuncdecl(NULL, cur_curpos.lnum))  /* XXX */
+  		    break;
+  		l = ml_get_curline();
+  
+--- 8148,8155 ----
+  		 * If the line looks like a function declaration, and we're
+  		 * not in a comment, put it the left margin.
+  		 */
+! 		if (cin_isfuncdecl(NULL, cur_curpos.lnum, 0,
+! 				   ind_maxparen, ind_maxcomment))  /* XXX */
+  		    break;
+  		l = ml_get_curline();
+  
+***************
+*** 8173,8179 ****
+  		 * line (and the ones that follow) needs to be indented as
+  		 * parameters.
+  		 */
+! 		if (cin_isfuncdecl(&l, curwin->w_cursor.lnum))
+  		{
+  		    amount = ind_param;
+  		    break;
+--- 8197,8204 ----
+  		 * line (and the ones that follow) needs to be indented as
+  		 * parameters.
+  		 */
+! 		if (cin_isfuncdecl(&l, curwin->w_cursor.lnum, 0,
+! 				   ind_maxparen, ind_maxcomment))
+  		{
+  		    amount = ind_param;
+  		    break;
+*** ../vim-7.3.379/src/testdir/test3.in	2011-12-14 20:05:17.000000000 +0100
+--- src/testdir/test3.in	2011-12-14 20:11:24.000000000 +0100
+***************
+*** 1429,1435 ****
+  
+  STARTTEST
+  :set cino&
+! 2kdd=4][
+  ENDTEST
+  
+  void func(void)
+--- 1429,1435 ----
+  
+  STARTTEST
+  :set cino&
+! 2kdd=7][
+  ENDTEST
+  
+  void func(void)
+***************
+*** 1478,1484 ****
+  	3, 4,
+  	5, 6};
+  
+! printf("Don't you dare indent this line incorrectly!\n);
+  }
+  
+  STARTTEST
+--- 1478,1506 ----
+  	3, 4,
+  	5, 6};
+  
+! printf("Don't you dare indent this line incorrectly!\n");
+! }
+! 
+! void
+! func4(a, b,
+! 		c)
+! int a;
+! int b;
+! int c;
+! {
+! }
+! 
+! void
+! func5(
+! 		int a,
+! 		int b)
+! {
+! }
+! 
+! void
+! func6(
+! 		int a)
+! {
+  }
+  
+  STARTTEST
+*** ../vim-7.3.379/src/testdir/test3.ok	2011-12-14 20:05:17.000000000 +0100
+--- src/testdir/test3.ok	2011-12-14 20:11:24.000000000 +0100
+***************
+*** 1331,1337 ****
+  		3, 4,
+  		5, 6};
+  
+! 	printf("Don't you dare indent this line incorrectly!\n);
+  }
+  
+  
+--- 1331,1359 ----
+  		3, 4,
+  		5, 6};
+  
+! 	printf("Don't you dare indent this line incorrectly!\n");
+! }
+! 
+! 	void
+! func4(a, b,
+! 		c)
+! 	int a;
+! 	int b;
+! 	int c;
+! {
+! }
+! 
+! 	void
+! func5(
+! 		int a,
+! 		int b)
+! {
+! }
+! 
+! 	void
+! func6(
+! 		int a)
+! {
+  }
+  
+  
+*** ../vim-7.3.379/src/version.c	2011-12-14 20:05:17.000000000 +0100
+--- src/version.c	2011-12-14 20:20:50.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     380,
+  /**/
+
+-- 
+"Intelligence has much less practical application than you'd think."
+		  -- Scott Adams, Dilbert.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.381 b/source/ap/vim/patches/7.3.381
new file mode 100644
index 00000000..b7957379
--- /dev/null
+++ b/source/ap/vim/patches/7.3.381
@@ -0,0 +1,260 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.381
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.381
+Problem:    Configure silently skips interfaces that won't work.
+Solution:   Add the --enable-fail_if_missing argument. (Shlomi Fish)
+Files:	    src/Makefile, src/configure.in, src/auto/configure
+
+
+*** ../vim-7.3.380/src/Makefile	2011-12-08 15:17:28.000000000 +0100
+--- src/Makefile	2011-12-14 20:49:26.000000000 +0100
+***************
+*** 389,394 ****
+--- 389,399 ----
+  #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/drscheme
+  #CONF_OPT_PLTHOME  = --with-plthome=/home/me/mz
+  
++ # Uncomment the next line to fail if one of the requested language interfaces
++ # cannot be configured.  Without this Vim will be build anyway, without
++ # the failing interfaces.
++ #CONF_OPT_FAIL = --enable-fail-if-missing
++ 
+  # PERL
+  # Uncomment one of these when you want to include the Perl interface.
+  # First one is for static linking, second one for dynamic loading.
+***************
+*** 1648,1654 ****
+  		CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
+  		LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
+  		./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
+! 		$(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \
+  		$(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
+  		$(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
+  		$(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
+--- 1653,1660 ----
+  		CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
+  		LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
+  		./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
+! 		$(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \
+! 		$(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \
+  		$(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
+  		$(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
+  		$(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
+*** ../vim-7.3.380/src/configure.in	2011-12-14 19:22:29.000000000 +0100
+--- src/configure.in	2011-12-14 20:46:36.000000000 +0100
+***************
+*** 28,33 ****
+--- 28,43 ----
+  AC_HEADER_STDC
+  AC_HEADER_SYS_WAIT
+  
++ dnl Check for the flag that fails if stuff are missing.
++ 
++ AC_MSG_CHECKING(--enable-fail-if-missing argument)
++ AC_ARG_ENABLE(fail_if_missing,
++ 	[  --enable-fail-if-missing    Fail if dependencies on additional features
++      specified on the command line are missing.], 
++ 	[fail_if_missing="yes"],
++ 	[fail_if_missing="no"])
++ AC_MSG_RESULT($fail_if_missing)
++ 
+  dnl Set default value for CFLAGS if none is defined or it's empty
+  if test -z "$CFLAGS"; then
+    CFLAGS="-O"
+***************
+*** 491,496 ****
+--- 501,509 ----
+        LUA_CFLAGS="-DDYNAMIC_LUA_DLL=\\\"liblua${vi_cv_version_lua}.so$LUA_SONAME\\\" $LUA_CFLAGS"
+      fi
+    fi
++   if test "$fail_if_missing" = "yes" -a -z "$LUA_SRC"; then
++     AC_MSG_ERROR([could not configure lua])
++   fi
+    AC_SUBST(LUA_SRC)
+    AC_SUBST(LUA_OBJ)
+    AC_SUBST(LUA_PRO)
+***************
+*** 781,786 ****
+--- 794,803 ----
+        PERL_CFLAGS="-DDYNAMIC_PERL_DLL=\\\"$libperl\\\" $PERL_CFLAGS"
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a "$perl_ok" != "yes"; then
++     AC_MSG_ERROR([could not configure perl])
++   fi
+  fi
+  AC_SUBST(shrpenv)
+  AC_SUBST(PERL_SRC)
+***************
+*** 966,971 ****
+--- 983,992 ----
+        AC_MSG_RESULT(too old)
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a "$python_ok" != "yes"; then
++     AC_MSG_ERROR([could not configure python])
++   fi
+  fi
+  
+  AC_SUBST(PYTHON_CONFDIR)
+***************
+*** 1389,1394 ****
+--- 1410,1418 ----
+        AC_MSG_RESULT(too old; need Tcl version 8.0 or later)
+      fi
+    fi
++   if test "$fail_if_missing" = "yes" -a -z "$TCL_SRC"; then
++     AC_MSG_ERROR([could not configure Tcl])
++   fi
+  fi
+  AC_SUBST(TCL_SRC)
+  AC_SUBST(TCL_OBJ)
+***************
+*** 1469,1474 ****
+--- 1493,1502 ----
+        AC_MSG_RESULT(too old; need Ruby version 1.6.0 or later)
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a -z "$RUBY_OBJ"; then
++     AC_MSG_ERROR([could not configure Ruby])
++   fi
+  fi
+  AC_SUBST(RUBY_SRC)
+  AC_SUBST(RUBY_OBJ)
+*** ../vim-7.3.380/src/auto/configure	2011-12-14 19:22:29.000000000 +0100
+--- src/auto/configure	2011-12-14 20:49:51.000000000 +0100
+***************
+*** 741,746 ****
+--- 741,747 ----
+  ac_subst_files=''
+  ac_user_opts='
+  enable_option_checking
++ enable_fail_if_missing
+  enable_darwin
+  with_mac_arch
+  with_developer_dir
+***************
+*** 1418,1423 ****
+--- 1419,1426 ----
+    --disable-option-checking  ignore unrecognized --enable/--with options
+    --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+    --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
++   --enable-fail-if-missing    Fail if dependencies on additional features
++      specified on the command line are missing.
+    --disable-darwin        Disable Darwin (Mac OS X) support.
+    --disable-selinux	  Don't check for SELinux support.
+    --disable-xsmp          Disable XSMP session management
+***************
+*** 3949,3954 ****
+--- 3952,3970 ----
+  fi
+  
+  
++ 
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-fail-if-missing argument" >&5
++ $as_echo_n "checking --enable-fail-if-missing argument... " >&6; }
++ # Check whether --enable-fail_if_missing was given.
++ if test "${enable_fail_if_missing+set}" = set; then :
++   enableval=$enable_fail_if_missing; fail_if_missing="yes"
++ else
++   fail_if_missing="no"
++ fi
++ 
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $fail_if_missing" >&5
++ $as_echo "$fail_if_missing" >&6; }
++ 
+  if test -z "$CFLAGS"; then
+    CFLAGS="-O"
+    test "$GCC" = yes && CFLAGS="-O2 -fno-strength-reduce -Wall"
+***************
+*** 4727,4732 ****
+--- 4743,4751 ----
+        LUA_CFLAGS="-DDYNAMIC_LUA_DLL=\\\"liblua${vi_cv_version_lua}.so$LUA_SONAME\\\" $LUA_CFLAGS"
+      fi
+    fi
++   if test "$fail_if_missing" = "yes" -a -z "$LUA_SRC"; then
++     as_fn_error "could not configure lua" "$LINENO" 5
++   fi
+  
+  
+  
+***************
+*** 5140,5145 ****
+--- 5159,5168 ----
+        PERL_CFLAGS="-DDYNAMIC_PERL_DLL=\\\"$libperl\\\" $PERL_CFLAGS"
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a "$perl_ok" != "yes"; then
++     as_fn_error "could not configure perl" "$LINENO" 5
++   fi
+  fi
+  
+  
+***************
+*** 5429,5434 ****
+--- 5452,5461 ----
+  $as_echo "too old" >&6; }
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a "$python_ok" != "yes"; then
++     as_fn_error "could not configure python" "$LINENO" 5
++   fi
+  fi
+  
+  
+***************
+*** 6216,6221 ****
+--- 6243,6251 ----
+  $as_echo "too old; need Tcl version 8.0 or later" >&6; }
+      fi
+    fi
++   if test "$fail_if_missing" = "yes" -a -z "$TCL_SRC"; then
++     as_fn_error "could not configure Tcl" "$LINENO" 5
++   fi
+  fi
+  
+  
+***************
+*** 6353,6358 ****
+--- 6383,6392 ----
+  $as_echo "too old; need Ruby version 1.6.0 or later" >&6; }
+      fi
+    fi
++ 
++   if test "$fail_if_missing" = "yes" -a -z "$RUBY_OBJ"; then
++     as_fn_error "could not configure Ruby" "$LINENO" 5
++   fi
+  fi
+  
+  
+*** ../vim-7.3.380/src/version.c	2011-12-14 20:21:29.000000000 +0100
+--- src/version.c	2011-12-14 20:50:42.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     381,
+  /**/
+
+-- 
+The psychic said, "God bless you."  I said, "I didn't sneeze."  She
+looked deep into my eyes and said, "You will, eventually."  And, damn
+if she wasn't right.  Two days later, I sneezed.  --Ellen Degeneres
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.382 b/source/ap/vim/patches/7.3.382
new file mode 100644
index 00000000..7f344e7e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.382
@@ -0,0 +1,173 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.382
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.382 (after 7.3.376)
+Problem:    IME characters are inserted twice.
+Solution:   Do not call DefWindowProc() if the event was handled. (Yasuhiro
+	    Matsumoto)
+Files:	    src/gui_w32.c
+
+
+*** ../vim-7.3.381/src/gui_w32.c	2011-12-14 15:23:53.000000000 +0100
+--- src/gui_w32.c	2011-12-15 21:50:51.000000000 +0100
+***************
+*** 798,804 ****
+  		if (pt.y < rect.top)
+  		{
+  		    show_tabline_popup_menu();
+! 		    return 0;
+  		}
+  	    }
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+--- 798,804 ----
+  		if (pt.y < rect.top)
+  		{
+  		    show_tabline_popup_menu();
+! 		    return 0L;
+  		}
+  	    }
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+***************
+*** 828,834 ****
+--- 828,837 ----
+  
+      case WM_ENDSESSION:
+  	if (wParam)	/* system only really goes down when wParam is TRUE */
++ 	{
+  	    _OnEndSession();
++ 	    return 0L;
++ 	}
+  	break;
+  
+      case WM_CHAR:
+***************
+*** 866,872 ****
+  	 * are received, mouse pointer remains hidden. */
+  	return MyWindowProc(hwnd, uMsg, wParam, lParam);
+  #else
+! 	return 0;
+  #endif
+  
+      case WM_SIZING:	/* HANDLE_MSG doesn't seem to handle this one */
+--- 869,875 ----
+  	 * are received, mouse pointer remains hidden. */
+  	return MyWindowProc(hwnd, uMsg, wParam, lParam);
+  #else
+! 	return 0L;
+  #endif
+  
+      case WM_SIZING:	/* HANDLE_MSG doesn't seem to handle this one */
+***************
+*** 874,880 ****
+  
+      case WM_MOUSEWHEEL:
+  	_OnMouseWheel(hwnd, HIWORD(wParam));
+! 	break;
+  
+  	/* Notification for change in SystemParametersInfo() */
+      case WM_SETTINGCHANGE:
+--- 877,883 ----
+  
+      case WM_MOUSEWHEEL:
+  	_OnMouseWheel(hwnd, HIWORD(wParam));
+! 	return 0L;
+  
+  	/* Notification for change in SystemParametersInfo() */
+      case WM_SETTINGCHANGE:
+***************
+*** 987,999 ****
+--- 990,1008 ----
+  	    case TCN_SELCHANGE:
+  		if (gui_mch_showing_tabline()
+  				  && ((LPNMHDR)lParam)->hwndFrom == s_tabhwnd)
++ 		{
+  		    send_tabline_event(TabCtrl_GetCurSel(s_tabhwnd) + 1);
++ 		    return 0L;
++ 		}
+  		break;
+  
+  	    case NM_RCLICK:
+  		if (gui_mch_showing_tabline()
+  			&& ((LPNMHDR)lParam)->hwndFrom == s_tabhwnd)
++ 		{
+  		    show_tabline_popup_menu();
++ 		    return 0L;
++ 		}
+  		break;
+  # endif
+  	    default:
+***************
+*** 1037,1042 ****
+--- 1046,1052 ----
+  		out_flush();
+  		did_menu_tip = TRUE;
+  	    }
++ 	    return 0L;
+  	}
+  	break;
+  #endif
+***************
+*** 1079,1096 ****
+      case WM_IME_NOTIFY:
+  	if (!_OnImeNotify(hwnd, (DWORD)wParam, (DWORD)lParam))
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+! 	break;
+      case WM_IME_COMPOSITION:
+  	if (!_OnImeComposition(hwnd, wParam, lParam))
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+! 	break;
+  #endif
+  
+      default:
+  	if (uMsg == msh_msgmousewheel && msh_msgmousewheel != 0)
+  	{   /* handle MSH_MOUSEWHEEL messages for Intellimouse */
+  	    _OnMouseWheel(hwnd, HIWORD(wParam));
+! 	    break;
+  	}
+  #ifdef MSWIN_FIND_REPLACE
+  	else if (uMsg == s_findrep_msg && s_findrep_msg != 0)
+--- 1089,1107 ----
+      case WM_IME_NOTIFY:
+  	if (!_OnImeNotify(hwnd, (DWORD)wParam, (DWORD)lParam))
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+! 	return 1L;
+! 
+      case WM_IME_COMPOSITION:
+  	if (!_OnImeComposition(hwnd, wParam, lParam))
+  	    return MyWindowProc(hwnd, uMsg, wParam, lParam);
+! 	return 1L;
+  #endif
+  
+      default:
+  	if (uMsg == msh_msgmousewheel && msh_msgmousewheel != 0)
+  	{   /* handle MSH_MOUSEWHEEL messages for Intellimouse */
+  	    _OnMouseWheel(hwnd, HIWORD(wParam));
+! 	    return 0L;
+  	}
+  #ifdef MSWIN_FIND_REPLACE
+  	else if (uMsg == s_findrep_msg && s_findrep_msg != 0)
+*** ../vim-7.3.381/src/version.c	2011-12-14 20:51:19.000000000 +0100
+--- src/version.c	2011-12-15 21:48:49.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     382,
+  /**/
+
+-- 
+Even got a Datapoint 3600(?) with a DD50 connector instead of the
+usual DB25...  what a nightmare trying to figure out the pinout
+for *that* with no spex...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.383 b/source/ap/vim/patches/7.3.383
new file mode 100644
index 00000000..c0ce6d90
--- /dev/null
+++ b/source/ap/vim/patches/7.3.383
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.383
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.383
+Problem:    For EBCDIC pound sign is defined as 't'.
+Solution:   Correctly define POUND.
+Files:	    src/ascii.h
+
+
+*** ../vim-7.3.382/src/ascii.h	2011-09-02 14:18:14.000000000 +0200
+--- src/ascii.h	2011-12-17 21:38:36.000000000 +0100
+***************
+*** 123,129 ****
+  #define DCS		0x90	/* Device Control String */
+  #define STERM		0x9c	/* String Terminator */
+  
+! #define POUND		'\xA3'
+  
+  #define CTRL_F_STR	"\056"
+  #define CTRL_H_STR	"\026"
+--- 123,129 ----
+  #define DCS		0x90	/* Device Control String */
+  #define STERM		0x9c	/* String Terminator */
+  
+! #define POUND		0xB1
+  
+  #define CTRL_F_STR	"\056"
+  #define CTRL_H_STR	"\026"
+*** ../vim-7.3.382/src/version.c	2011-12-15 21:51:32.000000000 +0100
+--- src/version.c	2011-12-23 12:46:08.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     383,
+  /**/
+
+-- 
+Vim is like Emacs without all the typing.  (John "Johann" Spetz)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.384 b/source/ap/vim/patches/7.3.384
new file mode 100644
index 00000000..f75ff408
--- /dev/null
+++ b/source/ap/vim/patches/7.3.384
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.384
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.384
+Problem:    Mapping CTRL-K in Insert mode breaks CTRL-X CTRL-K for dictionary
+	    completion.
+Solution:   Add CTRL-K to the list of recognized keys. (James McCoy)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.383/src/edit.c	2011-10-26 17:04:23.000000000 +0200
+--- src/edit.c	2011-12-23 12:36:22.000000000 +0100
+***************
+*** 2183,2189 ****
+  		    || c == Ctrl_I || c == Ctrl_D || c == Ctrl_P
+  		    || c == Ctrl_N || c == Ctrl_T || c == Ctrl_V
+  		    || c == Ctrl_Q || c == Ctrl_U || c == Ctrl_O
+! 		    || c == Ctrl_S || c == 's');
+  	case CTRL_X_SCROLL:
+  	    return (c == Ctrl_Y || c == Ctrl_E);
+  	case CTRL_X_WHOLE_LINE:
+--- 2183,2189 ----
+  		    || c == Ctrl_I || c == Ctrl_D || c == Ctrl_P
+  		    || c == Ctrl_N || c == Ctrl_T || c == Ctrl_V
+  		    || c == Ctrl_Q || c == Ctrl_U || c == Ctrl_O
+! 		    || c == Ctrl_S || c == Ctrl_K || c == 's');
+  	case CTRL_X_SCROLL:
+  	    return (c == Ctrl_Y || c == Ctrl_E);
+  	case CTRL_X_WHOLE_LINE:
+*** ../vim-7.3.383/src/version.c	2011-12-23 12:46:56.000000000 +0100
+--- src/version.c	2011-12-23 12:53:38.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     384,
+  /**/
+
+-- 
+Q: Is selling software the same as selling hardware?
+A: No, good hardware is sold new, good software has already been used by many.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.385 b/source/ap/vim/patches/7.3.385
new file mode 100644
index 00000000..405a77f0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.385
@@ -0,0 +1,69 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.385
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.385
+Problem:    When using an expression mapping on the command line the cursor
+	    ends up in the wrong place. (Yasuhiro Matsumoto)
+Solution:   Save and restore msg_col and msg_row when evaluating the
+	    expression.
+Files:	    src/getchar.
+
+
+*** ../vim-7.3.384/src/getchar.c	2011-10-12 22:02:07.000000000 +0200
+--- src/getchar.c	2011-12-14 18:37:52.000000000 +0100
+***************
+*** 4510,4515 ****
+--- 4510,4517 ----
+      char_u	*expr;
+      char_u	*save_cmd;
+      pos_T	save_cursor;
++     int		save_msg_col;
++     int		save_msg_row;
+  
+      /* Remove escaping of CSI, because "str" is in a format to be used as
+       * typeahead. */
+***************
+*** 4533,4544 ****
+--- 4535,4550 ----
+  #endif
+      set_vim_var_char(c);  /* set v:char to the typed character */
+      save_cursor = curwin->w_cursor;
++     save_msg_col = msg_col;
++     save_msg_row = msg_row;
+      p = eval_to_string(expr, NULL, FALSE);
+      --textlock;
+  #ifdef FEAT_EX_EXTRA
+      --ex_normal_lock;
+  #endif
+      curwin->w_cursor = save_cursor;
++     msg_col = save_msg_col;
++     msg_row = save_msg_row;
+  
+      restore_cmdline_alloc(save_cmd);
+      vim_free(expr);
+*** ../vim-7.3.384/src/version.c	2011-12-23 13:14:58.000000000 +0100
+--- src/version.c	2011-12-23 14:53:23.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     385,
+  /**/
+
+-- 
+`When any government, or any church for that matter, undertakes to say to
+ its subjects, "This you may not read, this you must not see, this you are
+ forbidden to know," the end result is tyranny and oppression no matter how
+ holy the motives' -- Robert A Heinlein, "If this goes on --"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.386 b/source/ap/vim/patches/7.3.386
new file mode 100644
index 00000000..c9035050
--- /dev/null
+++ b/source/ap/vim/patches/7.3.386
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.386
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.386
+Problem:    Test 83 fails when iconv does not support cp932. (raf)
+Solution:   Test if conversion works. (Yukihiro Nakadaira)
+Files:	    src/testdir/test83.in
+
+
+*** ../vim-7.3.385/src/testdir/test83.in	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/test83.in	2011-12-21 21:01:44.000000000 +0100
+***************
+*** 2,8 ****
+  
+  STARTTEST
+  :so mbyte.vim
+! :if !has('iconv')
+  : e! test.ok
+  : w! test.out
+  : qa!
+--- 2,8 ----
+  
+  STARTTEST
+  :so mbyte.vim
+! :if !has('iconv') || iconv("\x82\x60", "cp932", "utf-8") != "\uff21"
+  : e! test.ok
+  : w! test.out
+  : qa!
+*** ../vim-7.3.385/src/version.c	2011-12-23 14:54:01.000000000 +0100
+--- src/version.c	2011-12-23 14:55:38.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     386,
+  /**/
+
+-- 
+WOMAN:   King of the who?
+ARTHUR:  The Britons.
+WOMAN:   Who are the Britons?
+ARTHUR:  Well, we all are. we're all Britons and I am your king.
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.387 b/source/ap/vim/patches/7.3.387
new file mode 100644
index 00000000..6b20a58a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.387
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.387
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.387 (after 7.3.386)
+Problem:    Test 83 may fail for some encodings.
+Solution:   Set 'encoding' to utf-8 earlier.
+Files:	    src/testdir/test83.in
+
+
+*** ../vim-7.3.386/src/testdir/test83.in	2011-12-23 14:56:24.000000000 +0100
+--- src/testdir/test83.in	2011-12-30 13:05:05.000000000 +0100
+***************
+*** 2,13 ****
+  
+  STARTTEST
+  :so mbyte.vim
+  :if !has('iconv') || iconv("\x82\x60", "cp932", "utf-8") != "\uff21"
+  : e! test.ok
+  : w! test.out
+  : qa!
+  :endif
+- :set enc=utf8
+  
+  :/^text for tags1$/,/^text for tags1$/+1w! Xtags1.txt
+  :/^text for tags2$/,/^text for tags2$/+1w! Xtags2.txt
+--- 2,13 ----
+  
+  STARTTEST
+  :so mbyte.vim
++ :set enc=utf8
+  :if !has('iconv') || iconv("\x82\x60", "cp932", "utf-8") != "\uff21"
+  : e! test.ok
+  : w! test.out
+  : qa!
+  :endif
+  
+  :/^text for tags1$/,/^text for tags1$/+1w! Xtags1.txt
+  :/^text for tags2$/,/^text for tags2$/+1w! Xtags2.txt
+*** ../vim-7.3.386/src/version.c	2011-12-23 14:56:24.000000000 +0100
+--- src/version.c	2011-12-30 13:06:17.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     387,
+  /**/
+
+-- 
+Mental Floss prevents moral decay!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.388 b/source/ap/vim/patches/7.3.388
new file mode 100644
index 00000000..7a6df895
--- /dev/null
+++ b/source/ap/vim/patches/7.3.388
@@ -0,0 +1,45 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.388
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.388
+Problem:    Crash on exit when EXITFREE is defined and using tiny features.
+Solution:   Check for NULL window pointer. (Dominique Pelle)
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.387/src/buffer.c	2011-11-30 15:40:51.000000000 +0100
+--- src/buffer.c	2011-12-30 13:35:26.000000000 +0100
+***************
+*** 419,424 ****
+--- 419,426 ----
+      if (
+  #ifdef FEAT_WINDOWS
+  	win_valid(win) &&
++ #else
++ 	win != NULL &&
+  #endif
+  			  win->w_buffer == buf)
+  	win->w_buffer = NULL;  /* make sure we don't use the buffer now */
+*** ../vim-7.3.387/src/version.c	2011-12-30 13:09:15.000000000 +0100
+--- src/version.c	2011-12-30 13:37:23.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     388,
+  /**/
+
+-- 
+Be nice to your kids...  they'll be the ones choosing your nursing home.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.389 b/source/ap/vim/patches/7.3.389
new file mode 100644
index 00000000..c8a968c3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.389
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.389
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.389
+Problem:    After typing at a prompt the "MORE" message appears too soon.
+Solution:   reset lines_left in msg_end_prompt(). (Eswald)
+Files:	    src/message.c
+
+
+*** ../vim-7.3.388/src/message.c	2011-09-14 15:39:26.000000000 +0200
+--- src/message.c	2011-12-30 14:08:05.000000000 +0100
+***************
+*** 85,91 ****
+   *		    need_wait_return to be set.  This is a hack to make ":ts"
+   *		    work without an extra prompt.
+   * lines_left	    Number of lines available for messages before the
+!  *		    more-prompt is to be given.
+   * need_wait_return TRUE when the hit-return prompt is needed.
+   *		    Reset: After giving the hit-return prompt, when the user
+   *		    has answered some other prompt.
+--- 85,91 ----
+   *		    need_wait_return to be set.  This is a hack to make ":ts"
+   *		    work without an extra prompt.
+   * lines_left	    Number of lines available for messages before the
+!  *		    more-prompt is to be given.  -1 when not set.
+   * need_wait_return TRUE when the hit-return prompt is needed.
+   *		    Reset: After giving the hit-return prompt, when the user
+   *		    has answered some other prompt.
+***************
+*** 855,860 ****
+--- 855,861 ----
+      cmdline_row = msg_row;
+      msg_col = 0;
+      msg_clr_eos();
++     lines_left = -1;
+  }
+  #endif
+  
+*** ../vim-7.3.388/src/version.c	2011-12-30 13:39:04.000000000 +0100
+--- src/version.c	2011-12-30 14:11:00.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     389,
+  /**/
+
+-- 
+Proofread carefully to see if you any words out.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.390 b/source/ap/vim/patches/7.3.390
new file mode 100644
index 00000000..7199f8e1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.390
@@ -0,0 +1,155 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.390
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.390
+Problem:    Using NULL buffer pointer in a window.
+Solution:   Check for w_buffer being NULL in more places. (Bjorn Winckler)
+Files:	    src/ex_cmds.c, src/quickfix.c, src/window.c
+
+
+*** ../vim-7.3.389/src/ex_cmds.c	2011-11-30 17:01:55.000000000 +0100
+--- src/ex_cmds.c	2011-12-30 14:59:57.000000000 +0100
+***************
+*** 3390,3395 ****
+--- 3390,3402 ----
+  				      (flags & ECMD_HIDE) ? 0 : DOBUF_UNLOAD);
+  
+  #ifdef FEAT_AUTOCMD
++ 		/* Autocommands may open a new window and leave oldwin open
++ 		 * which leads to crashes since the above call sets
++ 		 * oldwin->w_buffer to NULL. */
++ 		if (curwin != oldwin && oldwin != aucmd_win
++ 			     && win_valid(oldwin) && oldwin->w_buffer == NULL)
++ 		    win_close(oldwin, FALSE);
++ 
+  # ifdef FEAT_EVAL
+  		if (aborting())	    /* autocmds may abort script processing */
+  		{
+*** ../vim-7.3.389/src/quickfix.c	2011-08-10 18:36:49.000000000 +0200
+--- src/quickfix.c	2011-12-30 14:45:19.000000000 +0100
+***************
+*** 2675,2681 ****
+  bt_quickfix(buf)
+      buf_T	*buf;
+  {
+!     return (buf->b_p_bt[0] == 'q');
+  }
+  
+  /*
+--- 2675,2681 ----
+  bt_quickfix(buf)
+      buf_T	*buf;
+  {
+!     return buf != NULL && buf->b_p_bt[0] == 'q';
+  }
+  
+  /*
+***************
+*** 2686,2693 ****
+  bt_nofile(buf)
+      buf_T	*buf;
+  {
+!     return (buf->b_p_bt[0] == 'n' && buf->b_p_bt[2] == 'f')
+! 	    || buf->b_p_bt[0] == 'a';
+  }
+  
+  /*
+--- 2686,2693 ----
+  bt_nofile(buf)
+      buf_T	*buf;
+  {
+!     return buf != NULL && ((buf->b_p_bt[0] == 'n' && buf->b_p_bt[2] == 'f')
+! 	    || buf->b_p_bt[0] == 'a');
+  }
+  
+  /*
+***************
+*** 2697,2703 ****
+  bt_dontwrite(buf)
+      buf_T	*buf;
+  {
+!     return (buf->b_p_bt[0] == 'n');
+  }
+  
+      int
+--- 2697,2703 ----
+  bt_dontwrite(buf)
+      buf_T	*buf;
+  {
+!     return buf != NULL && buf->b_p_bt[0] == 'n';
+  }
+  
+      int
+*** ../vim-7.3.389/src/window.c	2011-09-14 14:43:21.000000000 +0200
+--- src/window.c	2011-12-30 14:44:18.000000000 +0100
+***************
+*** 2170,2176 ****
+  
+      /* When closing the help window, try restoring a snapshot after closing
+       * the window.  Otherwise clear the snapshot, it's now invalid. */
+!     if (win->w_buffer->b_help)
+  	help_window = TRUE;
+      else
+  	clear_snapshot(curtab, SNAP_HELP_IDX);
+--- 2170,2176 ----
+  
+      /* When closing the help window, try restoring a snapshot after closing
+       * the window.  Otherwise clear the snapshot, it's now invalid. */
+!     if (win->w_buffer != NULL && win->w_buffer->b_help)
+  	help_window = TRUE;
+      else
+  	clear_snapshot(curtab, SNAP_HELP_IDX);
+***************
+*** 2214,2226 ****
+  
+  #ifdef FEAT_SYN_HL
+      /* Free independent synblock before the buffer is freed. */
+!     reset_synblock(win);
+  #endif
+  
+      /*
+       * Close the link to the buffer.
+       */
+!     close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0);
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+--- 2214,2228 ----
+  
+  #ifdef FEAT_SYN_HL
+      /* Free independent synblock before the buffer is freed. */
+!     if (win->w_buffer != NULL)
+! 	reset_synblock(win);
+  #endif
+  
+      /*
+       * Close the link to the buffer.
+       */
+!     if (win->w_buffer != NULL)
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0);
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+*** ../vim-7.3.389/src/version.c	2011-12-30 14:14:16.000000000 +0100
+--- src/version.c	2011-12-30 14:38:39.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     390,
+  /**/
+
+-- 
+There can't be a crisis today, my schedule is already full.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.391 b/source/ap/vim/patches/7.3.391
new file mode 100644
index 00000000..0a1bcceb
--- /dev/null
+++ b/source/ap/vim/patches/7.3.391
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.391
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.391
+Problem:    Can't check if the XPM_W32 feature is enabled.
+Solution:   Add xpm_w32 to the list of features. (kat)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.390/src/eval.c	2011-12-14 15:32:44.000000000 +0100
+--- src/eval.c	2012-01-04 14:33:22.000000000 +0100
+***************
+*** 12260,12265 ****
+--- 12260,12268 ----
+  #ifdef FEAT_XFONTSET
+  	"xfontset",
+  #endif
++ #ifdef FEAT_XPM_W32
++ 	"xpm_w32",
++ #endif
+  #ifdef USE_XSMP
+  	"xsmp",
+  #endif
+*** ../vim-7.3.390/src/version.c	2011-12-30 15:01:55.000000000 +0100
+--- src/version.c	2012-01-04 14:34:31.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     391,
+  /**/
+
+-- 
+ROBIN:  The what?
+ARTHUR: The Holy Hand Grenade of Antioch.  'Tis one of the sacred relics
+        Brother Maynard always carries with him.
+ALL:    Yes. Of course.
+ARTHUR: (shouting) Bring up the Holy Hand Grenade!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.392 b/source/ap/vim/patches/7.3.392
new file mode 100644
index 00000000..a603d90e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.392
@@ -0,0 +1,115 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.392
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.392
+Problem:    When setting 'undofile' while the file is already loaded but
+	    unchanged, try reading the undo file. (Andy Wokula)
+Solution:   Compute a checksum of the text when 'undofile' is set. (Christian
+	    Brabandt)
+Files:	    src/option.c, src/testdir/test72.in, src/testdir/test72.ok
+
+
+*** ../vim-7.3.391/src/option.c	2011-11-30 11:31:25.000000000 +0100
+--- src/option.c	2012-01-04 19:34:11.000000000 +0100
+***************
+*** 7516,7521 ****
+--- 7516,7545 ----
+  	compatible_set();
+      }
+  
++ #ifdef FEAT_PERSISTENT_UNDO
++     /* 'undofile' */
++     else if ((int *)varp == &curbuf->b_p_udf || (int *)varp == &p_udf)
++     {
++ 	char_u	hash[UNDO_HASH_SIZE];
++ 	buf_T	*save_curbuf = curbuf;
++ 
++ 	for (curbuf = firstbuf; curbuf != NULL; curbuf = curbuf->b_next)
++ 	{
++ 	    /* When 'undofile' is set globally: for every buffer, otherwise
++ 	     * only for the current buffer: Try to read in the undofile, if
++ 	     * one exists and the buffer wasn't changed. */
++ 	    if ((curbuf == save_curbuf
++ 				|| (opt_flags & OPT_GLOBAL) || opt_flags == 0)
++ 		    && !curbufIsChanged())
++ 	    {
++ 		u_compute_hash(hash);
++ 		u_read_undo(NULL, hash, curbuf->b_fname);
++ 	    }
++ 	}
++ 	curbuf = save_curbuf;
++     }
++ #endif
++ 
+      /* 'list', 'number' */
+      else if ((int *)varp == &curwin->w_p_list
+  	  || (int *)varp == &curwin->w_p_nu
+*** ../vim-7.3.391/src/testdir/test72.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test72.in	2012-01-04 19:04:17.000000000 +0100
+***************
+*** 51,56 ****
+--- 51,62 ----
+  :e Xtestfile
+  uuu:w >>test.out
+  :"
++ :" Test that reading the undofiles when setting undofile works
++ :set noundofile ul=0
++ i
++ u:e! Xtestfile
++ :set undofile ul=100
++ uuuuuu:w >>test.out
+  :" And now with encryption, cryptmethod=zip
+  :e! Xtestfile
+  :set undofile cm=zip
+*** ../vim-7.3.391/src/testdir/test72.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test72.ok	2012-01-04 19:04:17.000000000 +0100
+***************
+*** 7,12 ****
+--- 7,22 ----
+  eight
+  nine
+  ten
++ one
++ two
++ three
++ four
++ five
++ six
++ seven
++ eight
++ nine
++ ten
+  monday
+  wednesday
+  thursday
+*** ../vim-7.3.391/src/version.c	2012-01-04 14:35:31.000000000 +0100
+--- src/version.c	2012-01-04 19:33:41.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     392,
+  /**/
+
+-- 
+BROTHER MAYNARD: Armaments Chapter Two Verses Nine to Twenty One.
+ANOTHER MONK:    And St.  Attila raised his hand grenade up on high saying "O
+                 Lord bless this thy hand grenade that with it thou mayest
+                 blow thine enemies to tiny bits, in thy mercy. "and the Lord
+                 did grin and people did feast upon the lambs and sloths and
+                 carp and anchovies and orang-utans and breakfast cereals and
+                 fruit bats and...
+BROTHER MAYNARD: Skip a bit brother ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.393 b/source/ap/vim/patches/7.3.393
new file mode 100644
index 00000000..ca6cbc96
--- /dev/null
+++ b/source/ap/vim/patches/7.3.393
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.393
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.393
+Problem:    Win32: When resizing Vim it is always moved to the primary monitor
+	    if the secondary monitor is on the left.
+Solution:   Use the nearest monitor. (Yukihiro Nakadaira)
+Files:	    src/gui_w32.c
+
+
+*** ../vim-7.3.392/src/gui_w32.c	2011-12-15 21:51:32.000000000 +0100
+--- src/gui_w32.c	2012-01-04 20:25:58.000000000 +0100
+***************
+*** 1661,1669 ****
+  {
+      RECT	workarea_rect;
+      int		win_width, win_height;
+-     int		win_xpos, win_ypos;
+      WINDOWPLACEMENT wndpl;
+-     int		workarea_left;
+  
+      /* Try to keep window completely on screen. */
+      /* Get position of the screen work area.  This is the part that is not
+--- 1661,1667 ----
+***************
+*** 1685,1693 ****
+  	GetWindowPlacement(s_hwnd, &wndpl);
+      }
+  
+-     win_xpos = wndpl.rcNormalPosition.left;
+-     win_ypos = wndpl.rcNormalPosition.top;
+- 
+      /* compute the size of the outside of the window */
+      win_width = width + GetSystemMetrics(SM_CXFRAME) * 2;
+      win_height = height + GetSystemMetrics(SM_CYFRAME) * 2
+--- 1683,1688 ----
+***************
+*** 1697,1732 ****
+  #endif
+  			;
+  
+!     /* There is an inconsistency when using two monitors and Vim is on the
+!      * second (right) one: win_xpos will be the offset from the workarea of
+!      * the left monitor.  While with one monitor it's the offset from the
+!      * workarea (including a possible taskbar on the left).  Detect the second
+!      * monitor by checking for the left offset to be quite big. */
+!     if (workarea_rect.left > 300)
+! 	workarea_left = 0;
+!     else
+! 	workarea_left = workarea_rect.left;
+  
+!     /* If the window is going off the screen, move it on to the screen.
+!      * win_xpos and win_ypos are relative to the workarea. */
+      if ((direction & RESIZE_HOR)
+! 	    && workarea_left + win_xpos + win_width > workarea_rect.right)
+! 	win_xpos = workarea_rect.right - win_width - workarea_left;
+  
+!     if ((direction & RESIZE_HOR) && win_xpos < 0)
+! 	win_xpos = 0;
+  
+      if ((direction & RESIZE_VERT)
+! 	  && workarea_rect.top + win_ypos + win_height > workarea_rect.bottom)
+! 	win_ypos = workarea_rect.bottom - win_height - workarea_rect.top;
+  
+!     if ((direction & RESIZE_VERT) && win_ypos < 0)
+! 	win_ypos = 0;
+! 
+!     wndpl.rcNormalPosition.left = win_xpos;
+!     wndpl.rcNormalPosition.right = win_xpos + win_width;
+!     wndpl.rcNormalPosition.top = win_ypos;
+!     wndpl.rcNormalPosition.bottom = win_ypos + win_height;
+  
+      /* set window position - we should use SetWindowPlacement rather than
+       * SetWindowPos as the MSDN docs say the coord systems returned by
+--- 1692,1723 ----
+  #endif
+  			;
+  
+!     /* The following should take care of keeping Vim on the same monitor, no
+!      * matter if the secondary monitor is left or right of the primary
+!      * monitor. */
+!     wndpl.rcNormalPosition.right = wndpl.rcNormalPosition.left + win_width;
+!     wndpl.rcNormalPosition.bottom = wndpl.rcNormalPosition.top + win_height;
+  
+!     /* If the window is going off the screen, move it on to the screen. */
+      if ((direction & RESIZE_HOR)
+! 	    && wndpl.rcNormalPosition.right > workarea_rect.right)
+! 	OffsetRect(&wndpl.rcNormalPosition,
+! 		workarea_rect.right - wndpl.rcNormalPosition.right, 0);
+  
+!     if ((direction & RESIZE_HOR)
+! 	    && wndpl.rcNormalPosition.left < workarea_rect.left)
+! 	OffsetRect(&wndpl.rcNormalPosition,
+! 		workarea_rect.left - wndpl.rcNormalPosition.left, 0);
+  
+      if ((direction & RESIZE_VERT)
+! 	    && wndpl.rcNormalPosition.bottom > workarea_rect.bottom)
+! 	OffsetRect(&wndpl.rcNormalPosition,
+! 		0, workarea_rect.bottom - wndpl.rcNormalPosition.bottom);
+  
+!     if ((direction & RESIZE_VERT)
+! 	    && wndpl.rcNormalPosition.top < workarea_rect.top)
+! 	OffsetRect(&wndpl.rcNormalPosition,
+! 		0, workarea_rect.top - wndpl.rcNormalPosition.top);
+  
+      /* set window position - we should use SetWindowPlacement rather than
+       * SetWindowPos as the MSDN docs say the coord systems returned by
+*** ../vim-7.3.392/src/version.c	2012-01-04 19:34:32.000000000 +0100
+--- src/version.c	2012-01-04 20:28:57.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     393,
+  /**/
+
+-- 
+I wonder, do vegetarians eat fruit bats?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.394 b/source/ap/vim/patches/7.3.394
new file mode 100644
index 00000000..20c7cffe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.394
@@ -0,0 +1,62 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.394
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.394
+Problem:    When placing a mark while starting up a screen redraw messes up
+	    the screen. (lith)
+Solution:   Don't redraw while still starting up. (Christian Brabandt)
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.393/src/screen.c	2011-09-02 14:07:31.000000000 +0200
+--- src/screen.c	2012-01-10 12:36:52.000000000 +0100
+***************
+*** 764,772 ****
+  	    doit = TRUE;
+      }
+  
+!     /* Return when there is nothing to do or screen updating already
+!      * happening. */
+!     if (!doit || updating_screen)
+  	return;
+  
+      /* update all windows that need updating */
+--- 764,776 ----
+  	    doit = TRUE;
+      }
+  
+!     /* Return when there is nothing to do, screen updating is already
+!      * happening (recursive call) or still starting up. */
+!     if (!doit || updating_screen
+! #ifdef FEAT_GUI
+! 	    || gui.starting
+! #endif
+! 	    || starting)
+  	return;
+  
+      /* update all windows that need updating */
+*** ../vim-7.3.393/src/version.c	2012-01-04 20:29:18.000000000 +0100
+--- src/version.c	2012-01-10 12:41:32.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     394,
+  /**/
+
+-- 
+It is illegal for anyone to try and stop a child from playfully jumping over
+puddles of water.
+		[real standing law in California, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.395 b/source/ap/vim/patches/7.3.395
new file mode 100644
index 00000000..cb268939
--- /dev/null
+++ b/source/ap/vim/patches/7.3.395
@@ -0,0 +1,115 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.395
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.395 (after 7.3.251)
+Problem:    "dv?bar" in the last line deletes too much and breaks undo.
+Solution:   Only adjust the cursor position when it's after the last line of
+	    the buffer.  Add a test. (Christian Brabandt)
+Files:	    src/ops.c, src/testdir/test43.in, src/testdir/test43.ok
+
+
+*** ../vim-7.3.394/src/ops.c	2011-09-21 17:33:49.000000000 +0200
+--- src/ops.c	2012-01-10 13:28:05.000000000 +0100
+***************
+*** 1961,1968 ****
+  		/* Special case: gH<Del> deletes the last line. */
+  		del_lines(1L, FALSE);
+  		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+! 		if (curwin->w_cursor.lnum > 1)
+! 		    --curwin->w_cursor.lnum;
+  	    }
+  	    else
+  	    {
+--- 1962,1969 ----
+  		/* Special case: gH<Del> deletes the last line. */
+  		del_lines(1L, FALSE);
+  		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+! 		if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
+! 		    curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
+  	    }
+  	    else
+  	    {
+***************
+*** 4434,4440 ****
+  #endif
+  
+  /*
+!  * implementation of the format operator 'gq'
+   */
+      void
+  op_format(oap, keep_cursor)
+--- 4435,4441 ----
+  #endif
+  
+  /*
+!  * Implementation of the format operator 'gq'.
+   */
+      void
+  op_format(oap, keep_cursor)
+*** ../vim-7.3.394/src/testdir/test43.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test43.in	2012-01-10 13:41:13.000000000 +0100
+***************
+*** 13,19 ****
+  x:set magic
+  /\v(a)(b)\2\1\1/e
+  x/\V[ab]\(\[xy]\)\1
+! x:?^1?,$w! test.out
+  :qa!
+  ENDTEST
+  
+--- 13,23 ----
+  x:set magic
+  /\v(a)(b)\2\1\1/e
+  x/\V[ab]\(\[xy]\)\1
+! x:$
+! :set undolevels=100
+! dv?bar?
+! Yup:"
+! :?^1?,$w! test.out
+  :qa!
+  ENDTEST
+  
+***************
+*** 25,27 ****
+--- 29,33 ----
+  6 x ^aa$ x
+  7 (a)(b) abbaa
+  8 axx [ab]xx
++ 9 foobar
++ 
+*** ../vim-7.3.394/src/testdir/test43.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test43.ok	2012-01-10 13:42:39.000000000 +0100
+***************
+*** 6,8 ****
+--- 6,11 ----
+  6 x aa$ x
+  7 (a)(b) abba
+  8 axx ab]xx
++ 9 foobar
++ 9 foo
++ 
+*** ../vim-7.3.394/src/version.c	2012-01-10 12:42:05.000000000 +0100
+--- src/version.c	2012-01-10 13:30:40.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     395,
+  /**/
+
+-- 
+The Law, in its majestic equality, forbids the rich, as well as the
+poor, to sleep under the bridges, to beg in the streets, and to steal
+bread.                       -- Anatole France
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.396 b/source/ap/vim/patches/7.3.396
new file mode 100644
index 00000000..72b55a29
--- /dev/null
+++ b/source/ap/vim/patches/7.3.396
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.396
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.396
+Problem:    After forcing an operator to be characterwise it can still become
+	    linewise when spanning whole lines.
+Solution:   Don't make the operator linewise when motion_force was set.
+	    (Christian Brabandt)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.395/src/ops.c	2012-01-10 13:44:23.000000000 +0100
+--- src/ops.c	2012-01-10 13:28:05.000000000 +0100
+***************
+*** 1648,1653 ****
+--- 1648,1654 ----
+  	    && !oap->block_mode
+  #endif
+  	    && oap->line_count > 1
++ 	    && oap->motion_force == NUL
+  	    && oap->op_type == OP_DELETE)
+      {
+  	ptr = ml_get(oap->end.lnum) + oap->end.col;
+*** ../vim-7.3.395/src/version.c	2012-01-10 13:44:23.000000000 +0100
+--- src/version.c	2012-01-10 13:45:31.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     396,
+  /**/
+
+-- 
+Any sufficiently advanced technology is indistinguishable from magic.
+					Arthur C. Clarke
+Any sufficiently advanced bug is indistinguishable from a feature.
+                                        Rich Kulawiec
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.397 b/source/ap/vim/patches/7.3.397
new file mode 100644
index 00000000..866b3aac
--- /dev/null
+++ b/source/ap/vim/patches/7.3.397
@@ -0,0 +1,224 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.397
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.397
+Problem:    ":helpgrep" does not work properly when 'encoding' is not utf-8 or
+	    latin1.
+Solution:   Convert non-ascii lines to 'encoding'. (Yasuhiro Matsumoto)
+Files:	    src/quickfix.c, src/spell.c, src/misc2.c, src/proto/misc2.pro
+
+
+*** ../vim-7.3.396/src/quickfix.c	2011-12-30 15:01:55.000000000 +0100
+--- src/quickfix.c	2012-01-10 16:18:51.000000000 +0100
+***************
+*** 3914,3919 ****
+--- 3914,3929 ----
+      regmatch.rm_ic = FALSE;
+      if (regmatch.regprog != NULL)
+      {
++ #ifdef FEAT_MBYTE
++ 	vimconv_T vc;
++ 
++ 	/* Help files are in utf-8 or latin1, convert lines when 'encoding'
++ 	 * differs. */
++ 	vc.vc_type = CONV_NONE;
++ 	if (!enc_utf8)
++ 	    convert_setup(&vc, (char_u *)"utf-8", p_enc);
++ #endif
++ 
+  	/* create a new quickfix list */
+  	qf_new_list(qi, *eap->cmdlinep);
+  
+***************
+*** 3948,3968 ****
+  			lnum = 1;
+  			while (!vim_fgets(IObuff, IOSIZE, fd) && !got_int)
+  			{
+! 			    if (vim_regexec(&regmatch, IObuff, (colnr_T)0))
+  			    {
+! 				int	l = (int)STRLEN(IObuff);
+  
+  				/* remove trailing CR, LF, spaces, etc. */
+! 				while (l > 0 && IObuff[l - 1] <= ' ')
+! 				     IObuff[--l] = NUL;
+  
+  				if (qf_add_entry(qi, &prevp,
+  					    NULL,	/* dir */
+  					    fnames[fi],
+  					    0,
+! 					    IObuff,
+  					    lnum,
+! 					    (int)(regmatch.startp[0] - IObuff)
+  								+ 1, /* col */
+  					    FALSE,	/* vis_col */
+  					    NULL,	/* search pattern */
+--- 3958,3990 ----
+  			lnum = 1;
+  			while (!vim_fgets(IObuff, IOSIZE, fd) && !got_int)
+  			{
+! 			    char_u    *line = IObuff;
+! #ifdef FEAT_MBYTE
+! 			    /* Convert a line if 'encoding' is not utf-8 and
+! 			     * the line contains a non-ASCII character. */
+! 			    if (vc.vc_type != CONV_NONE
+! 						   && has_non_ascii(IObuff)) {
+! 				line = string_convert(&vc, IObuff, NULL);
+! 				if (line == NULL)
+! 				    line = IObuff;
+! 			    }
+! #endif
+! 
+! 			    if (vim_regexec(&regmatch, line, (colnr_T)0))
+  			    {
+! 				int	l = (int)STRLEN(line);
+  
+  				/* remove trailing CR, LF, spaces, etc. */
+! 				while (l > 0 && line[l - 1] <= ' ')
+! 				     line[--l] = NUL;
+  
+  				if (qf_add_entry(qi, &prevp,
+  					    NULL,	/* dir */
+  					    fnames[fi],
+  					    0,
+! 					    line,
+  					    lnum,
+! 					    (int)(regmatch.startp[0] - line)
+  								+ 1, /* col */
+  					    FALSE,	/* vis_col */
+  					    NULL,	/* search pattern */
+***************
+*** 3972,3980 ****
+--- 3994,4010 ----
+  					    ) == FAIL)
+  				{
+  				    got_int = TRUE;
++ #ifdef FEAT_MBYTE
++ 				    if (line != IObuff)
++ 					vim_free(line);
++ #endif
+  				    break;
+  				}
+  			    }
++ #ifdef FEAT_MBYTE
++ 			    if (line != IObuff)
++ 				vim_free(line);
++ #endif
+  			    ++lnum;
+  			    line_breakcheck();
+  			}
+***************
+*** 3984,3990 ****
+--- 4014,4025 ----
+  		FreeWild(fcount, fnames);
+  	    }
+  	}
++ 
+  	vim_free(regmatch.regprog);
++ #ifdef FEAT_MBYTE
++ 	if (vc.vc_type != CONV_NONE)
++ 	    convert_setup(&vc, NULL, NULL);
++ #endif
+  
+  	qi->qf_lists[qi->qf_curlist].qf_nonevalid = FALSE;
+  	qi->qf_lists[qi->qf_curlist].qf_ptr =
+*** ../vim-7.3.396/src/spell.c	2011-09-02 14:18:14.000000000 +0200
+--- src/spell.c	2012-01-10 16:19:33.000000000 +0100
+***************
+*** 5020,5026 ****
+  static int str_equal __ARGS((char_u *s1, char_u	*s2));
+  static void add_fromto __ARGS((spellinfo_T *spin, garray_T *gap, char_u	*from, char_u *to));
+  static int sal_to_bool __ARGS((char_u *s));
+- static int has_non_ascii __ARGS((char_u *s));
+  static void spell_free_aff __ARGS((afffile_T *aff));
+  static int spell_read_dic __ARGS((spellinfo_T *spin, char_u *fname, afffile_T *affile));
+  static int get_affix_flags __ARGS((afffile_T *affile, char_u *afflist));
+--- 5020,5025 ----
+***************
+*** 6485,6507 ****
+  }
+  
+  /*
+-  * Return TRUE if string "s" contains a non-ASCII character (128 or higher).
+-  * When "s" is NULL FALSE is returned.
+-  */
+-     static int
+- has_non_ascii(s)
+-     char_u	*s;
+- {
+-     char_u	*p;
+- 
+-     if (s != NULL)
+- 	for (p = s; *p != NUL; ++p)
+- 	    if (*p >= 128)
+- 		return TRUE;
+-     return FALSE;
+- }
+- 
+- /*
+   * Free the structure filled by spell_read_aff().
+   */
+      static void
+--- 6484,6489 ----
+*** ../vim-7.3.396/src/misc2.c	2011-12-08 17:49:31.000000000 +0100
+--- src/misc2.c	2012-01-10 16:25:53.000000000 +0100
+***************
+*** 6541,6543 ****
+--- 6541,6563 ----
+  #endif
+  
+  #endif
++ 
++ #if (defined(FEAT_MBYTE) && defined(FEAT_QUICKFIX)) \
++ 	|| defined(FEAT_SPELL) || defined(PROTO)
++ /*
++  * Return TRUE if string "s" contains a non-ASCII character (128 or higher).
++  * When "s" is NULL FALSE is returned.
++  */
++     int
++ has_non_ascii(s)
++     char_u	*s;
++ {
++     char_u	*p;
++ 
++     if (s != NULL)
++ 	for (p = s; *p != NUL; ++p)
++ 	    if (*p >= 128)
++ 		return TRUE;
++     return FALSE;
++ }
++ #endif
+*** ../vim-7.3.396/src/proto/misc2.pro	2011-07-07 16:20:45.000000000 +0200
+--- src/proto/misc2.pro	2012-01-10 16:20:03.000000000 +0100
+***************
+*** 116,119 ****
+--- 116,120 ----
+  char_u *read_string __ARGS((FILE *fd, int cnt));
+  int put_bytes __ARGS((FILE *fd, long_u nr, int len));
+  void put_time __ARGS((FILE *fd, time_t the_time));
++ int has_non_ascii __ARGS((char_u *s));
+  /* vim: set ft=c : */
+*** ../vim-7.3.396/src/version.c	2012-01-10 13:46:18.000000000 +0100
+--- src/version.c	2012-01-10 16:26:32.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     397,
+  /**/
+
+-- 
+Biting someone with your natural teeth is "simple assault," while biting
+someone with your false teeth is "aggravated assault."
+		[real standing law in Louisana, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.398 b/source/ap/vim/patches/7.3.398
new file mode 100644
index 00000000..8d4b2138
--- /dev/null
+++ b/source/ap/vim/patches/7.3.398
@@ -0,0 +1,65 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.398
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.398
+Problem:    When creating more than 10 location lists and adding items one by
+	    one a previous location may be used. (Audrius Kažukauskas)
+Solution:   Clear the location list completely when adding the tenth one.
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.397/src/quickfix.c	2012-01-10 16:28:41.000000000 +0100
+--- src/quickfix.c	2012-01-10 16:58:52.000000000 +0100
+***************
+*** 899,906 ****
+      }
+      else
+  	qi->qf_curlist = qi->qf_listcount++;
+!     qi->qf_lists[qi->qf_curlist].qf_index = 0;
+!     qi->qf_lists[qi->qf_curlist].qf_count = 0;
+      if (qf_title != NULL)
+      {
+  	char_u *p = alloc((int)STRLEN(qf_title) + 2);
+--- 899,905 ----
+      }
+      else
+  	qi->qf_curlist = qi->qf_listcount++;
+!     vim_memset(&qi->qf_lists[qi->qf_curlist], 0, (size_t)(sizeof(qf_list_T)));
+      if (qf_title != NULL)
+      {
+  	char_u *p = alloc((int)STRLEN(qf_title) + 2);
+***************
+*** 909,916 ****
+  	if (p != NULL)
+  	    sprintf((char *)p, ":%s", (char *)qf_title);
+      }
+-     else
+- 	qi->qf_lists[qi->qf_curlist].qf_title = NULL;
+  }
+  
+  /*
+--- 908,913 ----
+*** ../vim-7.3.397/src/version.c	2012-01-10 16:28:41.000000000 +0100
+--- src/version.c	2012-01-10 17:13:09.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     398,
+  /**/
+
+-- 
+Why don't cannibals eat clowns?
+Because they taste funny.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.399 b/source/ap/vim/patches/7.3.399
new file mode 100644
index 00000000..33d06302
--- /dev/null
+++ b/source/ap/vim/patches/7.3.399
@@ -0,0 +1,137 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.399
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.399
+Problem:    ":cd" doesn't work when the path contains wildcards. (Yukihiro
+	    Nakadaira)
+Solution:   Ignore wildcard errors when the EW_NOTWILD flag is used.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.398/src/misc1.c	2011-12-14 20:21:29.000000000 +0100
+--- src/misc1.c	2012-01-10 17:57:42.000000000 +0100
+***************
+*** 9103,9117 ****
+      }
+  
+      /* compile the regexp into a program */
+!     if (flags & EW_NOERROR)
+  	++emsg_silent;
+      regmatch.rm_ic = TRUE;		/* Always ignore case */
+      regmatch.regprog = vim_regcomp(pat, RE_MAGIC);
+!     if (flags & EW_NOERROR)
+  	--emsg_silent;
+      vim_free(pat);
+  
+!     if (regmatch.regprog == NULL)
+      {
+  	vim_free(buf);
+  	return 0;
+--- 9103,9117 ----
+      }
+  
+      /* compile the regexp into a program */
+!     if (flags & (EW_NOERROR | EW_NOTWILD))
+  	++emsg_silent;
+      regmatch.rm_ic = TRUE;		/* Always ignore case */
+      regmatch.regprog = vim_regcomp(pat, RE_MAGIC);
+!     if (flags & (EW_NOERROR | EW_NOTWILD))
+  	--emsg_silent;
+      vim_free(pat);
+  
+!     if (regmatch.regprog == NULL && (flags & EW_NOTWILD) == 0)
+      {
+  	vim_free(buf);
+  	return 0;
+***************
+*** 9179,9185 ****
+  	 * all entries found with "matchname". */
+  	if ((p[0] != '.' || starts_with_dot)
+  		&& (matchname == NULL
+! 		  || vim_regexec(&regmatch, p, (colnr_T)0)
+  		  || ((flags & EW_NOTWILD)
+  		     && fnamencmp(path + (s - buf), p, e - s) == 0)))
+  	{
+--- 9179,9186 ----
+  	 * all entries found with "matchname". */
+  	if ((p[0] != '.' || starts_with_dot)
+  		&& (matchname == NULL
+! 		  || (regmatch.regprog != NULL
+! 				     && vim_regexec(&regmatch, p, (colnr_T)0))
+  		  || ((flags & EW_NOTWILD)
+  		     && fnamencmp(path + (s - buf), p, e - s) == 0)))
+  	{
+***************
+*** 9419,9428 ****
+      else
+  	regmatch.rm_ic = FALSE;		/* Don't ignore case */
+  #endif
+      regmatch.regprog = vim_regcomp(pat, RE_MAGIC);
+      vim_free(pat);
+  
+!     if (regmatch.regprog == NULL)
+      {
+  	vim_free(buf);
+  	return 0;
+--- 9420,9433 ----
+      else
+  	regmatch.rm_ic = FALSE;		/* Don't ignore case */
+  #endif
++     if (flags & (EW_NOERROR | EW_NOTWILD))
++ 	++emsg_silent;
+      regmatch.regprog = vim_regcomp(pat, RE_MAGIC);
++     if (flags & (EW_NOERROR | EW_NOTWILD))
++ 	--emsg_silent;
+      vim_free(pat);
+  
+!     if (regmatch.regprog == NULL && (flags & EW_NOTWILD) == 0)
+      {
+  	vim_free(buf);
+  	return 0;
+***************
+*** 9452,9458 ****
+  	    if (dp == NULL)
+  		break;
+  	    if ((dp->d_name[0] != '.' || starts_with_dot)
+! 		 && (vim_regexec(&regmatch, (char_u *)dp->d_name, (colnr_T)0)
+  		   || ((flags & EW_NOTWILD)
+  		     && fnamencmp(path + (s - buf), dp->d_name, e - s) == 0)))
+  	    {
+--- 9457,9464 ----
+  	    if (dp == NULL)
+  		break;
+  	    if ((dp->d_name[0] != '.' || starts_with_dot)
+! 		 && ((regmatch.regprog != NULL && vim_regexec(&regmatch,
+! 					     (char_u *)dp->d_name, (colnr_T)0))
+  		   || ((flags & EW_NOTWILD)
+  		     && fnamencmp(path + (s - buf), dp->d_name, e - s) == 0)))
+  	    {
+*** ../vim-7.3.398/src/version.c	2012-01-10 17:13:48.000000000 +0100
+--- src/version.c	2012-01-10 18:21:05.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     399,
+  /**/
+
+-- 
+Close your shells, or I'll kill -9 you
+Tomorrow I'll quota you
+Remember the disks'll always be full
+And then while I'm away
+I'll write ~ everyday
+And I'll send-pr all my buggings to you.
+    [ CVS log "Beatles style" for FreeBSD ports/INDEX, Satoshi Asami ]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.400 b/source/ap/vim/patches/7.3.400
new file mode 100644
index 00000000..c621a881
--- /dev/null
+++ b/source/ap/vim/patches/7.3.400
@@ -0,0 +1,1762 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.400
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.400
+Problem:    Compiler warnings for shadowed variables.
+Solution:   Remove or rename the variables.
+Files:	    src/charset.c, src/digraph.c, src/edit.c, src/eval.c, src/fold.c,
+	    src/getchar.c, src/message.c, src/misc2.c, src/move.c,
+	    src/netbeans.c, src/option.c, src/os_unix.c, src/screen.c,
+	    src/search.c, src/spell.c, src/syntax.c, src/tag.c, src/window.c
+
+
+*** ../vim-7.3.399/src/charset.c	2010-08-15 21:57:25.000000000 +0200
+--- src/charset.c	2012-01-10 21:55:50.000000000 +0100
+***************
+*** 463,503 ****
+  	    if (enc_utf8)
+  	    {
+  		int	c = utf_ptr2char(STR_PTR(i));
+! 		int	ol = utf_ptr2len(STR_PTR(i));
+  		int	lc = utf_tolower(c);
+  
+  		/* Only replace the character when it is not an invalid
+  		 * sequence (ASCII character or more than one byte) and
+  		 * utf_tolower() doesn't return the original character. */
+! 		if ((c < 0x80 || ol > 1) && c != lc)
+  		{
+! 		    int	    nl = utf_char2len(lc);
+  
+  		    /* If the byte length changes need to shift the following
+  		     * characters forward or backward. */
+! 		    if (ol != nl)
+  		    {
+! 			if (nl > ol)
+  			{
+! 			    if (buf == NULL ? ga_grow(&ga, nl - ol + 1) == FAIL
+! 						    : len + nl - ol >= buflen)
+  			    {
+  				/* out of memory, keep old char */
+  				lc = c;
+! 				nl = ol;
+  			    }
+  			}
+! 			if (ol != nl)
+  			{
+  			    if (buf == NULL)
+  			    {
+! 				STRMOVE(GA_PTR(i) + nl, GA_PTR(i) + ol);
+! 				ga.ga_len += nl - ol;
+  			    }
+  			    else
+  			    {
+! 				STRMOVE(buf + i + nl, buf + i + ol);
+! 				len += nl - ol;
+  			    }
+  			}
+  		    }
+--- 463,504 ----
+  	    if (enc_utf8)
+  	    {
+  		int	c = utf_ptr2char(STR_PTR(i));
+! 		int	olen = utf_ptr2len(STR_PTR(i));
+  		int	lc = utf_tolower(c);
+  
+  		/* Only replace the character when it is not an invalid
+  		 * sequence (ASCII character or more than one byte) and
+  		 * utf_tolower() doesn't return the original character. */
+! 		if ((c < 0x80 || olen > 1) && c != lc)
+  		{
+! 		    int	    nlen = utf_char2len(lc);
+  
+  		    /* If the byte length changes need to shift the following
+  		     * characters forward or backward. */
+! 		    if (olen != nlen)
+  		    {
+! 			if (nlen > olen)
+  			{
+! 			    if (buf == NULL
+! 				    ? ga_grow(&ga, nlen - olen + 1) == FAIL
+! 				    : len + nlen - olen >= buflen)
+  			    {
+  				/* out of memory, keep old char */
+  				lc = c;
+! 				nlen = olen;
+  			    }
+  			}
+! 			if (olen != nlen)
+  			{
+  			    if (buf == NULL)
+  			    {
+! 				STRMOVE(GA_PTR(i) + nlen, GA_PTR(i) + olen);
+! 				ga.ga_len += nlen - olen;
+  			    }
+  			    else
+  			    {
+! 				STRMOVE(buf + i + nlen, buf + i + olen);
+! 				len += nlen - olen;
+  			    }
+  			}
+  		    }
+*** ../vim-7.3.399/src/digraph.c	2010-08-15 21:57:28.000000000 +0200
+--- src/digraph.c	2012-01-10 21:57:16.000000000 +0100
+***************
+*** 2080,2092 ****
+  /*
+   * Lookup the pair "char1", "char2" in the digraph tables.
+   * If no match, return "char2".
+!  * If "meta" is TRUE and "char1" is a space, return "char2" | 0x80.
+   */
+      static int
+! getexactdigraph(char1, char2, meta)
+      int		char1;
+      int		char2;
+!     int		meta;
+  {
+      int		i;
+      int		retval = 0;
+--- 2080,2092 ----
+  /*
+   * Lookup the pair "char1", "char2" in the digraph tables.
+   * If no match, return "char2".
+!  * If "meta_char" is TRUE and "char1" is a space, return "char2" | 0x80.
+   */
+      static int
+! getexactdigraph(char1, char2, meta_char)
+      int		char1;
+      int		char2;
+!     int		meta_char;
+  {
+      int		i;
+      int		retval = 0;
+***************
+*** 2159,2165 ****
+  
+      if (retval == 0)		/* digraph deleted or not found */
+      {
+! 	if (char1 == ' ' && meta)	/* <space> <char> --> meta-char */
+  	    return (char2 | 0x80);
+  	return char2;
+      }
+--- 2159,2165 ----
+  
+      if (retval == 0)		/* digraph deleted or not found */
+      {
+! 	if (char1 == ' ' && meta_char)	/* <space> <char> --> meta-char */
+  	    return (char2 | 0x80);
+  	return char2;
+      }
+***************
+*** 2171,2186 ****
+   * Allow for both char1-char2 and char2-char1
+   */
+      int
+! getdigraph(char1, char2, meta)
+      int	char1;
+      int	char2;
+!     int	meta;
+  {
+      int	    retval;
+  
+!     if (((retval = getexactdigraph(char1, char2, meta)) == char2)
+  	    && (char1 != char2)
+! 	    && ((retval = getexactdigraph(char2, char1, meta)) == char1))
+  	return char2;
+      return retval;
+  }
+--- 2171,2186 ----
+   * Allow for both char1-char2 and char2-char1
+   */
+      int
+! getdigraph(char1, char2, meta_char)
+      int	char1;
+      int	char2;
+!     int	meta_char;
+  {
+      int	    retval;
+  
+!     if (((retval = getexactdigraph(char1, char2, meta_char)) == char2)
+  	    && (char1 != char2)
+! 	    && ((retval = getexactdigraph(char2, char1, meta_char)) == char1))
+  	return char2;
+      return retval;
+  }
+*** ../vim-7.3.399/src/edit.c	2011-12-23 13:14:58.000000000 +0100
+--- src/edit.c	2012-01-10 21:58:28.000000000 +0100
+***************
+*** 4003,4026 ****
+  ins_compl_add_dict(dict)
+      dict_T	*dict;
+  {
+!     dictitem_T	*refresh;
+!     dictitem_T	*words;
+  
+      /* Check for optional "refresh" item. */
+      compl_opt_refresh_always = FALSE;
+!     refresh = dict_find(dict, (char_u *)"refresh", 7);
+!     if (refresh != NULL && refresh->di_tv.v_type == VAR_STRING)
+      {
+! 	char_u	*v = refresh->di_tv.vval.v_string;
+  
+  	if (v != NULL && STRCMP(v, (char_u *)"always") == 0)
+  	    compl_opt_refresh_always = TRUE;
+      }
+  
+      /* Add completions from a "words" list. */
+!     words = dict_find(dict, (char_u *)"words", 5);
+!     if (words != NULL && words->di_tv.v_type == VAR_LIST)
+! 	ins_compl_add_list(words->di_tv.vval.v_list);
+  }
+  
+  /*
+--- 4003,4026 ----
+  ins_compl_add_dict(dict)
+      dict_T	*dict;
+  {
+!     dictitem_T	*di_refresh;
+!     dictitem_T	*di_words;
+  
+      /* Check for optional "refresh" item. */
+      compl_opt_refresh_always = FALSE;
+!     di_refresh = dict_find(dict, (char_u *)"refresh", 7);
+!     if (di_refresh != NULL && di_refresh->di_tv.v_type == VAR_STRING)
+      {
+! 	char_u	*v = di_refresh->di_tv.vval.v_string;
+  
+  	if (v != NULL && STRCMP(v, (char_u *)"always") == 0)
+  	    compl_opt_refresh_always = TRUE;
+      }
+  
+      /* Add completions from a "words" list. */
+!     di_words = dict_find(dict, (char_u *)"words", 5);
+!     if (di_words != NULL && di_words->di_tv.v_type == VAR_LIST)
+! 	ins_compl_add_list(di_words->di_tv.vval.v_list);
+  }
+  
+  /*
+*** ../vim-7.3.399/src/eval.c	2012-01-04 14:35:31.000000000 +0100
+--- src/eval.c	2012-01-10 22:00:50.000000000 +0100
+***************
+*** 6573,6587 ****
+  
+  /*
+   * Join list "l" into a string in "*gap", using separator "sep".
+!  * When "echo" is TRUE use String as echoed, otherwise as inside a List.
+   * Return FAIL or OK.
+   */
+      static int
+! list_join(gap, l, sep, echo, copyID)
+      garray_T	*gap;
+      list_T	*l;
+      char_u	*sep;
+!     int		echo;
+      int		copyID;
+  {
+      int		first = TRUE;
+--- 6573,6587 ----
+  
+  /*
+   * Join list "l" into a string in "*gap", using separator "sep".
+!  * When "echo_style" is TRUE use String as echoed, otherwise as inside a List.
+   * Return FAIL or OK.
+   */
+      static int
+! list_join(gap, l, sep, echo_style, copyID)
+      garray_T	*gap;
+      list_T	*l;
+      char_u	*sep;
+!     int		echo_style;
+      int		copyID;
+  {
+      int		first = TRUE;
+***************
+*** 6597,6603 ****
+  	else
+  	    ga_concat(gap, sep);
+  
+! 	if (echo)
+  	    s = echo_string(&item->li_tv, &tofree, numbuf, copyID);
+  	else
+  	    s = tv2string(&item->li_tv, &tofree, numbuf, copyID);
+--- 6597,6603 ----
+  	else
+  	    ga_concat(gap, sep);
+  
+! 	if (echo_style)
+  	    s = echo_string(&item->li_tv, &tofree, numbuf, copyID);
+  	else
+  	    s = tv2string(&item->li_tv, &tofree, numbuf, copyID);
+***************
+*** 17893,17899 ****
+      typval_T	*argvars;
+      typval_T	*rettv;
+  {
+!     char_u	*instr;
+      char_u	*fromstr;
+      char_u	*tostr;
+      char_u	*p;
+--- 17893,17899 ----
+      typval_T	*argvars;
+      typval_T	*rettv;
+  {
+!     char_u	*in_str;
+      char_u	*fromstr;
+      char_u	*tostr;
+      char_u	*p;
+***************
+*** 17910,17916 ****
+      char_u	buf2[NUMBUFLEN];
+      garray_T	ga;
+  
+!     instr = get_tv_string(&argvars[0]);
+      fromstr = get_tv_string_buf_chk(&argvars[1], buf);
+      tostr = get_tv_string_buf_chk(&argvars[2], buf2);
+  
+--- 17910,17916 ----
+      char_u	buf2[NUMBUFLEN];
+      garray_T	ga;
+  
+!     in_str = get_tv_string(&argvars[0]);
+      fromstr = get_tv_string_buf_chk(&argvars[1], buf);
+      tostr = get_tv_string_buf_chk(&argvars[2], buf2);
+  
+***************
+*** 17936,17954 ****
+  	}
+  
+      /* fromstr and tostr have to contain the same number of chars */
+!     while (*instr != NUL)
+      {
+  #ifdef FEAT_MBYTE
+  	if (has_mbyte)
+  	{
+! 	    inlen = (*mb_ptr2len)(instr);
+! 	    cpstr = instr;
+  	    cplen = inlen;
+  	    idx = 0;
+  	    for (p = fromstr; *p != NUL; p += fromlen)
+  	    {
+  		fromlen = (*mb_ptr2len)(p);
+! 		if (fromlen == inlen && STRNCMP(instr, p, inlen) == 0)
+  		{
+  		    for (p = tostr; *p != NUL; p += tolen)
+  		    {
+--- 17936,17954 ----
+  	}
+  
+      /* fromstr and tostr have to contain the same number of chars */
+!     while (*in_str != NUL)
+      {
+  #ifdef FEAT_MBYTE
+  	if (has_mbyte)
+  	{
+! 	    inlen = (*mb_ptr2len)(in_str);
+! 	    cpstr = in_str;
+  	    cplen = inlen;
+  	    idx = 0;
+  	    for (p = fromstr; *p != NUL; p += fromlen)
+  	    {
+  		fromlen = (*mb_ptr2len)(p);
+! 		if (fromlen == inlen && STRNCMP(in_str, p, inlen) == 0)
+  		{
+  		    for (p = tostr; *p != NUL; p += tolen)
+  		    {
+***************
+*** 17967,17977 ****
+  		++idx;
+  	    }
+  
+! 	    if (first && cpstr == instr)
+  	    {
+  		/* Check that fromstr and tostr have the same number of
+  		 * (multi-byte) characters.  Done only once when a character
+! 		 * of instr doesn't appear in fromstr. */
+  		first = FALSE;
+  		for (p = tostr; *p != NUL; p += tolen)
+  		{
+--- 17967,17977 ----
+  		++idx;
+  	    }
+  
+! 	    if (first && cpstr == in_str)
+  	    {
+  		/* Check that fromstr and tostr have the same number of
+  		 * (multi-byte) characters.  Done only once when a character
+! 		 * of in_str doesn't appear in fromstr. */
+  		first = FALSE;
+  		for (p = tostr; *p != NUL; p += tolen)
+  		{
+***************
+*** 17986,18003 ****
+  	    mch_memmove((char *)ga.ga_data + ga.ga_len, cpstr, (size_t)cplen);
+  	    ga.ga_len += cplen;
+  
+! 	    instr += inlen;
+  	}
+  	else
+  #endif
+  	{
+  	    /* When not using multi-byte chars we can do it faster. */
+! 	    p = vim_strchr(fromstr, *instr);
+  	    if (p != NULL)
+  		ga_append(&ga, tostr[p - fromstr]);
+  	    else
+! 		ga_append(&ga, *instr);
+! 	    ++instr;
+  	}
+      }
+  
+--- 17986,18003 ----
+  	    mch_memmove((char *)ga.ga_data + ga.ga_len, cpstr, (size_t)cplen);
+  	    ga.ga_len += cplen;
+  
+! 	    in_str += inlen;
+  	}
+  	else
+  #endif
+  	{
+  	    /* When not using multi-byte chars we can do it faster. */
+! 	    p = vim_strchr(fromstr, *in_str);
+  	    if (p != NULL)
+  		ga_append(&ga, tostr[p - fromstr]);
+  	    else
+! 		ga_append(&ga, *in_str);
+! 	    ++in_str;
+  	}
+      }
+  
+*** ../vim-7.3.399/src/fold.c	2011-08-26 16:12:55.000000000 +0200
+--- src/fold.c	2012-01-10 22:01:26.000000000 +0100
+***************
+*** 1033,1042 ****
+   * Init the fold info in a new window.
+   */
+      void
+! foldInitWin(newwin)
+!     win_T	*newwin;
+  {
+!     ga_init2(&newwin->w_folds, (int)sizeof(fold_T), 10);
+  }
+  
+  /* find_wl_entry() {{{2 */
+--- 1033,1042 ----
+   * Init the fold info in a new window.
+   */
+      void
+! foldInitWin(new_win)
+!     win_T	*new_win;
+  {
+!     ga_init2(&new_win->w_folds, (int)sizeof(fold_T), 10);
+  }
+  
+  /* find_wl_entry() {{{2 */
+*** ../vim-7.3.399/src/getchar.c	2011-12-23 14:54:01.000000000 +0100
+--- src/getchar.c	2012-01-10 22:02:30.000000000 +0100
+***************
+*** 418,429 ****
+  
+  /*
+   * Remove the contents of the stuff buffer and the mapped characters in the
+!  * typeahead buffer (used in case of an error).  If 'typeahead' is true,
+   * flush all typeahead characters (used when interrupted by a CTRL-C).
+   */
+      void
+! flush_buffers(typeahead)
+!     int typeahead;
+  {
+      init_typebuf();
+  
+--- 418,429 ----
+  
+  /*
+   * Remove the contents of the stuff buffer and the mapped characters in the
+!  * typeahead buffer (used in case of an error).  If "flush_typeahead" is true,
+   * flush all typeahead characters (used when interrupted by a CTRL-C).
+   */
+      void
+! flush_buffers(flush_typeahead)
+!     int flush_typeahead;
+  {
+      init_typebuf();
+  
+***************
+*** 431,437 ****
+      while (read_stuff(TRUE) != NUL)
+  	;
+  
+!     if (typeahead)	    /* remove all typeahead */
+      {
+  	/*
+  	 * We have to get all characters, because we may delete the first part
+--- 431,437 ----
+      while (read_stuff(TRUE) != NUL)
+  	;
+  
+!     if (flush_typeahead)	    /* remove all typeahead */
+      {
+  	/*
+  	 * We have to get all characters, because we may delete the first part
+*** ../vim-7.3.399/src/message.c	2011-12-30 14:14:16.000000000 +0100
+--- src/message.c	2012-01-10 22:03:56.000000000 +0100
+***************
+*** 2487,2493 ****
+  #ifdef FEAT_CON_DIALOG
+      int		retval = FALSE;
+  #endif
+!     int		scroll;
+      msgchunk_T	*mp_last = NULL;
+      msgchunk_T	*mp;
+      int		i;
+--- 2487,2493 ----
+  #ifdef FEAT_CON_DIALOG
+      int		retval = FALSE;
+  #endif
+!     int		toscroll;
+      msgchunk_T	*mp_last = NULL;
+      msgchunk_T	*mp;
+      int		i;
+***************
+*** 2538,2586 ****
+  	}
+  #endif
+  
+! 	scroll = 0;
+  	switch (c)
+  	{
+  	case BS:		/* scroll one line back */
+  	case K_BS:
+  	case 'k':
+  	case K_UP:
+! 	    scroll = -1;
+  	    break;
+  
+  	case CAR:		/* one extra line */
+  	case NL:
+  	case 'j':
+  	case K_DOWN:
+! 	    scroll = 1;
+  	    break;
+  
+  	case 'u':		/* Up half a page */
+! 	    scroll = -(Rows / 2);
+  	    break;
+  
+  	case 'd':		/* Down half a page */
+! 	    scroll = Rows / 2;
+  	    break;
+  
+  	case 'b':		/* one page back */
+  	case K_PAGEUP:
+! 	    scroll = -(Rows - 1);
+  	    break;
+  
+  	case ' ':		/* one extra page */
+  	case 'f':
+  	case K_PAGEDOWN:
+  	case K_LEFTMOUSE:
+! 	    scroll = Rows - 1;
+  	    break;
+  
+  	case 'g':		/* all the way back to the start */
+! 	    scroll = -999999;
+  	    break;
+  
+  	case 'G':		/* all the way to the end */
+! 	    scroll = 999999;
+  	    lines_left = 999999;
+  	    break;
+  
+--- 2538,2586 ----
+  	}
+  #endif
+  
+! 	toscroll = 0;
+  	switch (c)
+  	{
+  	case BS:		/* scroll one line back */
+  	case K_BS:
+  	case 'k':
+  	case K_UP:
+! 	    toscroll = -1;
+  	    break;
+  
+  	case CAR:		/* one extra line */
+  	case NL:
+  	case 'j':
+  	case K_DOWN:
+! 	    toscroll = 1;
+  	    break;
+  
+  	case 'u':		/* Up half a page */
+! 	    toscroll = -(Rows / 2);
+  	    break;
+  
+  	case 'd':		/* Down half a page */
+! 	    toscroll = Rows / 2;
+  	    break;
+  
+  	case 'b':		/* one page back */
+  	case K_PAGEUP:
+! 	    toscroll = -(Rows - 1);
+  	    break;
+  
+  	case ' ':		/* one extra page */
+  	case 'f':
+  	case K_PAGEDOWN:
+  	case K_LEFTMOUSE:
+! 	    toscroll = Rows - 1;
+  	    break;
+  
+  	case 'g':		/* all the way back to the start */
+! 	    toscroll = -999999;
+  	    break;
+  
+  	case 'G':		/* all the way to the end */
+! 	    toscroll = 999999;
+  	    lines_left = 999999;
+  	    break;
+  
+***************
+*** 2633,2641 ****
+  	    continue;
+  	}
+  
+! 	if (scroll != 0)
+  	{
+! 	    if (scroll < 0)
+  	    {
+  		/* go to start of last line */
+  		if (mp_last == NULL)
+--- 2633,2641 ----
+  	    continue;
+  	}
+  
+! 	if (toscroll != 0)
+  	{
+! 	    if (toscroll < 0)
+  	    {
+  		/* go to start of last line */
+  		if (mp_last == NULL)
+***************
+*** 2653,2659 ****
+  		if (mp != NULL && mp->sb_prev != NULL)
+  		{
+  		    /* Find line to be displayed at top. */
+! 		    for (i = 0; i > scroll; --i)
+  		    {
+  			if (mp == NULL || mp->sb_prev == NULL)
+  			    break;
+--- 2653,2659 ----
+  		if (mp != NULL && mp->sb_prev != NULL)
+  		{
+  		    /* Find line to be displayed at top. */
+! 		    for (i = 0; i > toscroll; --i)
+  		    {
+  			if (mp == NULL || mp->sb_prev == NULL)
+  			    break;
+***************
+*** 2664,2670 ****
+  			    mp_last = msg_sb_start(mp_last->sb_prev);
+  		    }
+  
+! 		    if (scroll == -1 && screen_ins_lines(0, 0, 1,
+  						       (int)Rows, NULL) == OK)
+  		    {
+  			/* display line at top */
+--- 2664,2670 ----
+  			    mp_last = msg_sb_start(mp_last->sb_prev);
+  		    }
+  
+! 		    if (toscroll == -1 && screen_ins_lines(0, 0, 1,
+  						       (int)Rows, NULL) == OK)
+  		    {
+  			/* display line at top */
+***************
+*** 2680,2692 ****
+  			    ++msg_scrolled;
+  			}
+  		    }
+! 		    scroll = 0;
+  		}
+  	    }
+  	    else
+  	    {
+  		/* First display any text that we scrolled back. */
+! 		while (scroll > 0 && mp_last != NULL)
+  		{
+  		    /* scroll up, display line at bottom */
+  		    msg_scroll_up();
+--- 2680,2692 ----
+  			    ++msg_scrolled;
+  			}
+  		    }
+! 		    toscroll = 0;
+  		}
+  	    }
+  	    else
+  	    {
+  		/* First display any text that we scrolled back. */
+! 		while (toscroll > 0 && mp_last != NULL)
+  		{
+  		    /* scroll up, display line at bottom */
+  		    msg_scroll_up();
+***************
+*** 2694,2704 ****
+  		    screen_fill((int)Rows - 2, (int)Rows - 1, 0,
+  						   (int)Columns, ' ', ' ', 0);
+  		    mp_last = disp_sb_line((int)Rows - 2, mp_last);
+! 		    --scroll;
+  		}
+  	    }
+  
+! 	    if (scroll <= 0)
+  	    {
+  		/* displayed the requested text, more prompt again */
+  		screen_fill((int)Rows - 1, (int)Rows, 0,
+--- 2694,2704 ----
+  		    screen_fill((int)Rows - 2, (int)Rows - 1, 0,
+  						   (int)Columns, ' ', ' ', 0);
+  		    mp_last = disp_sb_line((int)Rows - 2, mp_last);
+! 		    --toscroll;
+  		}
+  	    }
+  
+! 	    if (toscroll <= 0)
+  	    {
+  		/* displayed the requested text, more prompt again */
+  		screen_fill((int)Rows - 1, (int)Rows, 0,
+***************
+*** 2708,2714 ****
+  	    }
+  
+  	    /* display more text, return to caller */
+! 	    lines_left = scroll;
+  	}
+  
+  	break;
+--- 2708,2714 ----
+  	    }
+  
+  	    /* display more text, return to caller */
+! 	    lines_left = toscroll;
+  	}
+  
+  	break;
+*** ../vim-7.3.399/src/misc2.c	2012-01-10 16:28:41.000000000 +0100
+--- src/misc2.c	2012-01-10 22:04:25.000000000 +0100
+***************
+*** 1559,1565 ****
+  	    if (enc_utf8)
+  	    {
+  		int	c, uc;
+! 		int	nl;
+  		char_u	*s;
+  
+  		c = utf_ptr2char(p);
+--- 1559,1565 ----
+  	    if (enc_utf8)
+  	    {
+  		int	c, uc;
+! 		int	newl;
+  		char_u	*s;
+  
+  		c = utf_ptr2char(p);
+***************
+*** 1568,1588 ****
+  		/* Reallocate string when byte count changes.  This is rare,
+  		 * thus it's OK to do another malloc()/free(). */
+  		l = utf_ptr2len(p);
+! 		nl = utf_char2len(uc);
+! 		if (nl != l)
+  		{
+! 		    s = alloc((unsigned)STRLEN(res) + 1 + nl - l);
+  		    if (s == NULL)
+  			break;
+  		    mch_memmove(s, res, p - res);
+! 		    STRCPY(s + (p - res) + nl, p + l);
+  		    p = s + (p - res);
+  		    vim_free(res);
+  		    res = s;
+  		}
+  
+  		utf_char2bytes(uc, p);
+! 		p += nl;
+  	    }
+  	    else if (has_mbyte && (l = (*mb_ptr2len)(p)) > 1)
+  		p += l;		/* skip multi-byte character */
+--- 1568,1588 ----
+  		/* Reallocate string when byte count changes.  This is rare,
+  		 * thus it's OK to do another malloc()/free(). */
+  		l = utf_ptr2len(p);
+! 		newl = utf_char2len(uc);
+! 		if (newl != l)
+  		{
+! 		    s = alloc((unsigned)STRLEN(res) + 1 + newl - l);
+  		    if (s == NULL)
+  			break;
+  		    mch_memmove(s, res, p - res);
+! 		    STRCPY(s + (p - res) + newl, p + l);
+  		    p = s + (p - res);
+  		    vim_free(res);
+  		    res = s;
+  		}
+  
+  		utf_char2bytes(uc, p);
+! 		p += newl;
+  	    }
+  	    else if (has_mbyte && (l = (*mb_ptr2len)(p)) > 1)
+  		p += l;		/* skip multi-byte character */
+*** ../vim-7.3.399/src/move.c	2011-02-01 18:01:06.000000000 +0100
+--- src/move.c	2012-01-10 22:05:22.000000000 +0100
+***************
+*** 926,933 ****
+   * Also updates curwin->w_leftcol.
+   */
+      void
+! curs_columns(scroll)
+!     int		scroll;		/* when TRUE, may scroll horizontally */
+  {
+      int		diff;
+      int		extra;		/* offset for first screen line */
+--- 926,933 ----
+   * Also updates curwin->w_leftcol.
+   */
+      void
+! curs_columns(may_scroll)
+!     int		may_scroll;	/* when TRUE, may scroll horizontally */
+  {
+      int		diff;
+      int		extra;		/* offset for first screen line */
+***************
+*** 1014,1020 ****
+      /* No line wrapping: compute curwin->w_leftcol if scrolling is on and line
+       * is not folded.
+       * If scrolling is off, curwin->w_leftcol is assumed to be 0 */
+!     else if (scroll
+  #ifdef FEAT_FOLDING
+  	    && !curwin->w_cline_folded
+  #endif
+--- 1014,1020 ----
+      /* No line wrapping: compute curwin->w_leftcol if scrolling is on and line
+       * is not folded.
+       * If scrolling is off, curwin->w_leftcol is assumed to be 0 */
+!     else if (may_scroll
+  #ifdef FEAT_FOLDING
+  	    && !curwin->w_cline_folded
+  #endif
+*** ../vim-7.3.399/src/netbeans.c	2011-10-20 21:58:20.000000000 +0200
+--- src/netbeans.c	2012-01-10 22:16:26.000000000 +0100
+***************
+*** 1395,1401 ****
+      int		cmdno,
+      char_u	*args)	    /* points to space before arguments or NUL */
+  {
+!     int		doupdate = 0;
+      long	off = 0;
+      nbbuf_T	*buf = nb_get_buf(bufno);
+      static int	skip = 0;
+--- 1395,1401 ----
+      int		cmdno,
+      char_u	*args)	    /* points to space before arguments or NUL */
+  {
+!     int		do_update = 0;
+      long	off = 0;
+      nbbuf_T	*buf = nb_get_buf(bufno);
+      static int	skip = 0;
+***************
+*** 1600,1606 ****
+  							last.lnum, last.col));
+  		del_from_lnum = first.lnum;
+  		del_to_lnum = last.lnum;
+! 		doupdate = 1;
+  
+  		/* Get the position of the first byte after the deleted
+  		 * section.  "next" is NULL when deleting to the end of the
+--- 1600,1606 ----
+  							last.lnum, last.col));
+  		del_from_lnum = first.lnum;
+  		del_to_lnum = last.lnum;
+! 		do_update = 1;
+  
+  		/* Get the position of the first byte after the deleted
+  		 * section.  "next" is NULL when deleting to the end of the
+***************
+*** 1777,1783 ****
+  		lnum = lnum_start;
+  
+  		/* Loop over the "\n" separated lines of the argument. */
+! 		doupdate = 1;
+  		while (*args != NUL)
+  		{
+  		    nl = vim_strchr(args, '\n');
+--- 1777,1783 ----
+  		lnum = lnum_start;
+  
+  		/* Loop over the "\n" separated lines of the argument. */
+! 		do_update = 1;
+  		while (*args != NUL)
+  		{
+  		    nl = vim_strchr(args, '\n');
+***************
+*** 1992,1998 ****
+  		EMSG("E640: invalid buffer identifier in initDone");
+  		return FAIL;
+  	    }
+! 	    doupdate = 1;
+  	    buf->initDone = TRUE;
+  	    nb_set_curbuf(buf->bufp);
+  #if defined(FEAT_AUTOCMD)
+--- 1992,1998 ----
+  		EMSG("E640: invalid buffer identifier in initDone");
+  		return FAIL;
+  	    }
+! 	    do_update = 1;
+  	    buf->initDone = TRUE;
+  	    nb_set_curbuf(buf->bufp);
+  #if defined(FEAT_AUTOCMD)
+***************
+*** 2081,2087 ****
+  					     ECMD_HIDE + ECMD_OLDBUF, curwin);
+  	    buf->bufp = curbuf;
+  	    buf->initDone = TRUE;
+! 	    doupdate = 1;
+  #if defined(FEAT_TITLE)
+  	    maketitle();
+  #endif
+--- 2081,2087 ----
+  					     ECMD_HIDE + ECMD_OLDBUF, curwin);
+  	    buf->bufp = curbuf;
+  	    buf->initDone = TRUE;
+! 	    do_update = 1;
+  #if defined(FEAT_TITLE)
+  	    maketitle();
+  #endif
+***************
+*** 2109,2115 ****
+  		exarg.forceit = FALSE;
+  		dosetvisible = TRUE;
+  		goto_buffer(&exarg, DOBUF_FIRST, FORWARD, buf->bufp->b_fnum);
+! 		doupdate = 1;
+  		dosetvisible = FALSE;
+  
+  #ifdef FEAT_GUI
+--- 2109,2115 ----
+  		exarg.forceit = FALSE;
+  		dosetvisible = TRUE;
+  		goto_buffer(&exarg, DOBUF_FIRST, FORWARD, buf->bufp->b_fnum);
+! 		do_update = 1;
+  		dosetvisible = FALSE;
+  
+  #ifdef FEAT_GUI
+***************
+*** 2309,2315 ****
+  						     buf->bufp->b_fnum, TRUE);
+  	    buf->bufp = NULL;
+  	    buf->initDone = FALSE;
+! 	    doupdate = 1;
+  /* =====================================================================*/
+  	}
+  	else if (streq((char *)cmd, "setStyle")) /* obsolete... */
+--- 2309,2315 ----
+  						     buf->bufp->b_fnum, TRUE);
+  	    buf->bufp = NULL;
+  	    buf->initDone = FALSE;
+! 	    do_update = 1;
+  /* =====================================================================*/
+  	}
+  	else if (streq((char *)cmd, "setStyle")) /* obsolete... */
+***************
+*** 2400,2406 ****
+  		return FAIL;
+  	    }
+  
+! 	    doupdate = 1;
+  
+  	    cp = (char *)args;
+  	    serNum = strtol(cp, &cp, 10);
+--- 2400,2406 ----
+  		return FAIL;
+  	    }
+  
+! 	    do_update = 1;
+  
+  	    cp = (char *)args;
+  	    serNum = strtol(cp, &cp, 10);
+***************
+*** 2448,2454 ****
+  		nbdebug(("    invalid buffer identifier in removeAnno\n"));
+  		return FAIL;
+  	    }
+! 	    doupdate = 1;
+  	    cp = (char *)args;
+  	    serNum = strtol(cp, &cp, 10);
+  	    args = (char_u *)cp;
+--- 2448,2454 ----
+  		nbdebug(("    invalid buffer identifier in removeAnno\n"));
+  		return FAIL;
+  	    }
+! 	    do_update = 1;
+  	    cp = (char *)args;
+  	    serNum = strtol(cp, &cp, 10);
+  	    args = (char_u *)cp;
+***************
+*** 2493,2499 ****
+  	    len = strtol(cp, NULL, 10);
+  	    args = (char_u *)cp;
+  	    pos = off2pos(buf->bufp, off);
+! 	    doupdate = 1;
+  	    if (!pos)
+  		nbdebug(("    no such start pos in %s, %ld\n", cmd, off));
+  	    else
+--- 2493,2499 ----
+  	    len = strtol(cp, NULL, 10);
+  	    args = (char_u *)cp;
+  	    pos = off2pos(buf->bufp, off);
+! 	    do_update = 1;
+  	    if (!pos)
+  		nbdebug(("    no such start pos in %s, %ld\n", cmd, off));
+  	    else
+***************
+*** 2555,2561 ****
+  	    inAtomic = 0;
+  	    if (needupdate)
+  	    {
+! 		doupdate = 1;
+  		needupdate = 0;
+  	    }
+  /* =====================================================================*/
+--- 2555,2561 ----
+  	    inAtomic = 0;
+  	    if (needupdate)
+  	    {
+! 		do_update = 1;
+  		needupdate = 0;
+  	    }
+  /* =====================================================================*/
+***************
+*** 2636,2653 ****
+  	 * Unrecognized command is ignored.
+  	 */
+      }
+!     if (inAtomic && doupdate)
+      {
+  	needupdate = 1;
+! 	doupdate = 0;
+      }
+  
+      /*
+       * Is this needed? I moved the netbeans_Xt_connect() later during startup
+       * and it may no longer be necessary. If its not needed then needupdate
+!      * and doupdate can also be removed.
+       */
+!     if (buf != NULL && buf->initDone && doupdate)
+      {
+  	update_screen(NOT_VALID);
+  	setcursor();
+--- 2636,2653 ----
+  	 * Unrecognized command is ignored.
+  	 */
+      }
+!     if (inAtomic && do_update)
+      {
+  	needupdate = 1;
+! 	do_update = 0;
+      }
+  
+      /*
+       * Is this needed? I moved the netbeans_Xt_connect() later during startup
+       * and it may no longer be necessary. If its not needed then needupdate
+!      * and do_update can also be removed.
+       */
+!     if (buf != NULL && buf->initDone && do_update)
+      {
+  	update_screen(NOT_VALID);
+  	setcursor();
+*** ../vim-7.3.399/src/option.c	2012-01-04 19:34:32.000000000 +0100
+--- src/option.c	2012-01-10 22:06:03.000000000 +0100
+***************
+*** 8584,8591 ****
+      long_u	flags;
+  {
+      /* Careful: P_RCLR and P_RALL are a combination of other P_ flags */
+!     int		clear = (flags & P_RCLR) == P_RCLR;
+!     int		all = ((flags & P_RALL) == P_RALL || clear);
+  
+  #ifdef FEAT_WINDOWS
+      if ((flags & P_RSTAT) || all)	/* mark all status lines dirty */
+--- 8584,8591 ----
+      long_u	flags;
+  {
+      /* Careful: P_RCLR and P_RALL are a combination of other P_ flags */
+!     int		doclear = (flags & P_RCLR) == P_RCLR;
+!     int		all = ((flags & P_RALL) == P_RALL || doclear);
+  
+  #ifdef FEAT_WINDOWS
+      if ((flags & P_RSTAT) || all)	/* mark all status lines dirty */
+***************
+*** 8596,8602 ****
+  	changed_window_setting();
+      if (flags & P_RBUF)
+  	redraw_curbuf_later(NOT_VALID);
+!     if (clear)
+  	redraw_all_later(CLEAR);
+      else if (all)
+  	redraw_all_later(NOT_VALID);
+--- 8596,8602 ----
+  	changed_window_setting();
+      if (flags & P_RBUF)
+  	redraw_curbuf_later(NOT_VALID);
+!     if (doclear)
+  	redraw_all_later(CLEAR);
+      else if (all)
+  	redraw_all_later(NOT_VALID);
+*** ../vim-7.3.399/src/os_unix.c	2011-10-20 21:09:25.000000000 +0200
+--- src/os_unix.c	2012-01-10 21:48:49.000000000 +0100
+***************
+*** 3884,3890 ****
+      char_u	*p_shcf_copy = NULL;
+      int		i;
+      char_u	*p;
+-     char_u	*s;
+      int		inquote;
+      int		pty_master_fd = -1;	    /* for pty's */
+  # ifdef FEAT_GUI
+--- 3884,3889 ----
+***************
+*** 3963,3968 ****
+--- 3962,3969 ----
+      }
+      if (cmd != NULL)
+      {
++ 	char_u	*s;
++ 
+  	if (extra_shell_arg != NULL)
+  	    argv[argc++] = (char *)extra_shell_arg;
+  
+***************
+*** 4325,4331 ****
+  			linenr_T    lnum = curbuf->b_op_start.lnum;
+  			int	    written = 0;
+  			char_u	    *lp = ml_get(lnum);
+- 			char_u	    *s;
+  			size_t	    l;
+  
+  			close(fromshell_fd);
+--- 4326,4331 ----
+***************
+*** 4339,4345 ****
+  				len = write(toshell_fd, "", (size_t)1);
+  			    else
+  			    {
+! 				s = vim_strchr(lp + written, NL);
+  				len = write(toshell_fd, (char *)lp + written,
+  					   s == NULL ? l
+  					      : (size_t)(s - (lp + written)));
+--- 4339,4346 ----
+  				len = write(toshell_fd, "", (size_t)1);
+  			    else
+  			    {
+! 				char_u	*s = vim_strchr(lp + written, NL);
+! 
+  				len = write(toshell_fd, (char *)lp + written,
+  					   s == NULL ? l
+  					      : (size_t)(s - (lp + written)));
+*** ../vim-7.3.399/src/screen.c	2012-01-10 12:42:05.000000000 +0100
+--- src/screen.c	2012-01-10 22:06:51.000000000 +0100
+***************
+*** 7849,7863 ****
+  
+  /*
+   * screen_valid -  allocate screen buffers if size changed
+!  *   If "clear" is TRUE: clear screen if it has been resized.
+   *	Returns TRUE if there is a valid screen to write to.
+   *	Returns FALSE when starting up and screen not initialized yet.
+   */
+      int
+! screen_valid(clear)
+!     int	    clear;
+  {
+!     screenalloc(clear);	    /* allocate screen buffers if size changed */
+      return (ScreenLines != NULL);
+  }
+  
+--- 7849,7863 ----
+  
+  /*
+   * screen_valid -  allocate screen buffers if size changed
+!  *   If "doclear" is TRUE: clear screen if it has been resized.
+   *	Returns TRUE if there is a valid screen to write to.
+   *	Returns FALSE when starting up and screen not initialized yet.
+   */
+      int
+! screen_valid(doclear)
+!     int	    doclear;
+  {
+!     screenalloc(doclear);	   /* allocate screen buffers if size changed */
+      return (ScreenLines != NULL);
+  }
+  
+***************
+*** 7872,7879 ****
+   * final size of the shell is needed.
+   */
+      void
+! screenalloc(clear)
+!     int	    clear;
+  {
+      int		    new_row, old_row;
+  #ifdef FEAT_GUI
+--- 7872,7879 ----
+   * final size of the shell is needed.
+   */
+      void
+! screenalloc(doclear)
+!     int	    doclear;
+  {
+      int		    new_row, old_row;
+  #ifdef FEAT_GUI
+***************
+*** 8069,8075 ****
+  	     * (used when resizing the window at the "--more--" prompt or when
+  	     * executing an external command, for the GUI).
+  	     */
+! 	    if (!clear)
+  	    {
+  		(void)vim_memset(new_ScreenLines + new_row * Columns,
+  				      ' ', (size_t)Columns * sizeof(schar_T));
+--- 8069,8075 ----
+  	     * (used when resizing the window at the "--more--" prompt or when
+  	     * executing an external command, for the GUI).
+  	     */
+! 	    if (!doclear)
+  	    {
+  		(void)vim_memset(new_ScreenLines + new_row * Columns,
+  				      ' ', (size_t)Columns * sizeof(schar_T));
+***************
+*** 8159,8165 ****
+      screen_Columns = Columns;
+  
+      must_redraw = CLEAR;	/* need to clear the screen later */
+!     if (clear)
+  	screenclear2();
+  
+  #ifdef FEAT_GUI
+--- 8159,8165 ----
+      screen_Columns = Columns;
+  
+      must_redraw = CLEAR;	/* need to clear the screen later */
+!     if (doclear)
+  	screenclear2();
+  
+  #ifdef FEAT_GUI
+*** ../vim-7.3.399/src/search.c	2011-10-04 17:00:13.000000000 +0200
+--- src/search.c	2012-01-10 22:07:16.000000000 +0100
+***************
+*** 2402,2425 ****
+      {
+  	if (vim_strchr(p, ';') != NULL) /* there may be comments */
+  	{
+! 	    int instr = FALSE;	/* inside of string */
+  
+  	    p = line;		/* scan from start */
+  	    while ((p = vim_strpbrk(p, (char_u *)"\";")) != NULL)
+  	    {
+  		if (*p == '"')
+  		{
+! 		    if (instr)
+  		    {
+  			if (*(p - 1) != '\\') /* skip escaped quote */
+! 			    instr = FALSE;
+  		    }
+  		    else if (p == line || ((p - line) >= 2
+  				      /* skip #\" form */
+  				      && *(p - 1) != '\\' && *(p - 2) != '#'))
+! 			instr = TRUE;
+  		}
+! 		else if (!instr && ((p - line) < 2
+  				    || (*(p - 1) != '\\' && *(p - 2) != '#')))
+  		    break;	/* found! */
+  		++p;
+--- 2402,2425 ----
+      {
+  	if (vim_strchr(p, ';') != NULL) /* there may be comments */
+  	{
+! 	    int in_str = FALSE;	/* inside of string */
+  
+  	    p = line;		/* scan from start */
+  	    while ((p = vim_strpbrk(p, (char_u *)"\";")) != NULL)
+  	    {
+  		if (*p == '"')
+  		{
+! 		    if (in_str)
+  		    {
+  			if (*(p - 1) != '\\') /* skip escaped quote */
+! 			    in_str = FALSE;
+  		    }
+  		    else if (p == line || ((p - line) >= 2
+  				      /* skip #\" form */
+  				      && *(p - 1) != '\\' && *(p - 2) != '#'))
+! 			in_str = TRUE;
+  		}
+! 		else if (!in_str && ((p - line) < 2
+  				    || (*(p - 1) != '\\' && *(p - 2) != '#')))
+  		    break;	/* found! */
+  		++p;
+*** ../vim-7.3.399/src/spell.c	2012-01-10 16:28:41.000000000 +0100
+--- src/spell.c	2012-01-10 22:09:23.000000000 +0100
+***************
+*** 5049,5055 ****
+  static int offset2bytes __ARGS((int nr, char_u *buf));
+  static int bytes2offset __ARGS((char_u **pp));
+  static void sug_write __ARGS((spellinfo_T *spin, char_u *fname));
+! static void mkspell __ARGS((int fcount, char_u **fnames, int ascii, int overwrite, int added_word));
+  static void spell_message __ARGS((spellinfo_T *spin, char_u *str));
+  static void init_spellfile __ARGS((void));
+  
+--- 5049,5055 ----
+  static int offset2bytes __ARGS((int nr, char_u *buf));
+  static int bytes2offset __ARGS((char_u **pp));
+  static void sug_write __ARGS((spellinfo_T *spin, char_u *fname));
+! static void mkspell __ARGS((int fcount, char_u **fnames, int ascii, int over_write, int added_word));
+  static void spell_message __ARGS((spellinfo_T *spin, char_u *str));
+  static void init_spellfile __ARGS((void));
+  
+***************
+*** 9085,9095 ****
+   * and ".spl" is appended to make the output file name.
+   */
+      static void
+! mkspell(fcount, fnames, ascii, overwrite, added_word)
+      int		fcount;
+      char_u	**fnames;
+      int		ascii;		    /* -ascii argument given */
+!     int		overwrite;	    /* overwrite existing output file */
+      int		added_word;	    /* invoked through "zg" */
+  {
+      char_u	*fname = NULL;
+--- 9085,9095 ----
+   * and ".spl" is appended to make the output file name.
+   */
+      static void
+! mkspell(fcount, fnames, ascii, over_write, added_word)
+      int		fcount;
+      char_u	**fnames;
+      int		ascii;		    /* -ascii argument given */
+!     int		over_write;	    /* overwrite existing output file */
+      int		added_word;	    /* invoked through "zg" */
+  {
+      char_u	*fname = NULL;
+***************
+*** 9173,9179 ****
+      {
+  	/* Check for overwriting before doing things that may take a lot of
+  	 * time. */
+! 	if (!overwrite && mch_stat((char *)wfname, &st) >= 0)
+  	{
+  	    EMSG(_(e_exists));
+  	    goto theend;
+--- 9173,9179 ----
+      {
+  	/* Check for overwriting before doing things that may take a lot of
+  	 * time. */
+! 	if (!over_write && mch_stat((char *)wfname, &st) >= 0)
+  	{
+  	    EMSG(_(e_exists));
+  	    goto theend;
+*** ../vim-7.3.399/src/syntax.c	2011-06-19 04:54:17.000000000 +0200
+--- src/syntax.c	2012-01-10 22:10:23.000000000 +0100
+***************
+*** 4006,4022 ****
+  }
+  
+      static void
+! syn_list_flags(nl, flags, attr)
+!     struct name_list	*nl;
+      int			flags;
+      int			attr;
+  {
+      int		i;
+  
+!     for (i = 0; nl[i].flag != 0; ++i)
+! 	if (flags & nl[i].flag)
+  	{
+! 	    msg_puts_attr((char_u *)nl[i].name, attr);
+  	    msg_putchar(' ');
+  	}
+  }
+--- 4006,4022 ----
+  }
+  
+      static void
+! syn_list_flags(nlist, flags, attr)
+!     struct name_list	*nlist;
+      int			flags;
+      int			attr;
+  {
+      int		i;
+  
+!     for (i = 0; nlist[i].flag != 0; ++i)
+! 	if (flags & nlist[i].flag)
+  	{
+! 	    msg_puts_attr((char_u *)nlist[i].name, attr);
+  	    msg_putchar(' ');
+  	}
+  }
+*** ../vim-7.3.399/src/tag.c	2011-12-14 14:15:12.000000000 +0100
+--- src/tag.c	2012-01-10 21:51:05.000000000 +0100
+***************
+*** 1353,1359 ****
+      int		match_count = 0;		/* number of matches found */
+      char_u	**matches;
+      int		mtt;
+-     int		len;
+      int		help_save;
+  #ifdef FEAT_MULTI_LANG
+      int		help_pri = 0;
+--- 1353,1358 ----
+***************
+*** 2235,2240 ****
+--- 2234,2241 ----
+  		 */
+  		if (ga_grow(&ga_match[mtt], 1) == OK)
+  		{
++ 		    int len;
++ 
+  		    if (help_only)
+  		    {
+  #ifdef FEAT_MULTI_LANG
+*** ../vim-7.3.399/src/window.c	2011-12-30 15:01:55.000000000 +0100
+--- src/window.c	2012-01-10 22:11:41.000000000 +0100
+***************
+*** 683,701 ****
+  }
+  
+  /*
+!  * When "newwin" is NULL: split the current window in two.
+!  * When "newwin" is not NULL: insert this window at the far
+   * top/left/right/bottom.
+   * return FAIL for failure, OK otherwise
+   */
+      int
+! win_split_ins(size, flags, newwin, dir)
+      int		size;
+      int		flags;
+!     win_T	*newwin;
+      int		dir;
+  {
+!     win_T	*wp = newwin;
+      win_T	*oldwin;
+      int		new_size = size;
+      int		i;
+--- 683,701 ----
+  }
+  
+  /*
+!  * When "new_wp" is NULL: split the current window in two.
+!  * When "new_wp" is not NULL: insert this window at the far
+   * top/left/right/bottom.
+   * return FAIL for failure, OK otherwise
+   */
+      int
+! win_split_ins(size, flags, new_wp, dir)
+      int		size;
+      int		flags;
+!     win_T	*new_wp;
+      int		dir;
+  {
+!     win_T	*wp = new_wp;
+      win_T	*oldwin;
+      int		new_size = size;
+      int		i;
+***************
+*** 718,724 ****
+      /* add a status line when p_ls == 1 and splitting the first window */
+      if (lastwin == firstwin && p_ls == 1 && oldwin->w_status_height == 0)
+      {
+! 	if (oldwin->w_height <= p_wmh && newwin == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+--- 718,724 ----
+      /* add a status line when p_ls == 1 and splitting the first window */
+      if (lastwin == firstwin && p_ls == 1 && oldwin->w_status_height == 0)
+      {
+! 	if (oldwin->w_height <= p_wmh && new_wp == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+***************
+*** 751,757 ****
+  	}
+  	else
+  	    available = oldwin->w_width;
+! 	if (available < needed && newwin == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+--- 751,757 ----
+  	}
+  	else
+  	    available = oldwin->w_width;
+! 	if (available < needed && new_wp == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+***************
+*** 815,821 ****
+  	    available = oldwin->w_height;
+  	    needed += p_wmh;
+  	}
+! 	if (available < needed && newwin == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+--- 815,821 ----
+  	    available = oldwin->w_height;
+  	    needed += p_wmh;
+  	}
+! 	if (available < needed && new_wp == NULL)
+  	{
+  	    EMSG(_(e_noroom));
+  	    return FAIL;
+***************
+*** 888,907 ****
+  			p_sb))))
+      {
+  	/* new window below/right of current one */
+! 	if (newwin == NULL)
+  	    wp = win_alloc(oldwin, FALSE);
+  	else
+  	    win_append(oldwin, wp);
+      }
+      else
+      {
+! 	if (newwin == NULL)
+  	    wp = win_alloc(oldwin->w_prev, FALSE);
+  	else
+  	    win_append(oldwin->w_prev, wp);
+      }
+  
+!     if (newwin == NULL)
+      {
+  	if (wp == NULL)
+  	    return FAIL;
+--- 888,907 ----
+  			p_sb))))
+      {
+  	/* new window below/right of current one */
+! 	if (new_wp == NULL)
+  	    wp = win_alloc(oldwin, FALSE);
+  	else
+  	    win_append(oldwin, wp);
+      }
+      else
+      {
+! 	if (new_wp == NULL)
+  	    wp = win_alloc(oldwin->w_prev, FALSE);
+  	else
+  	    win_append(oldwin->w_prev, wp);
+      }
+  
+!     if (new_wp == NULL)
+      {
+  	if (wp == NULL)
+  	    return FAIL;
+***************
+*** 972,981 ****
+  		frp->fr_parent = curfrp;
+      }
+  
+!     if (newwin == NULL)
+  	frp = wp->w_frame;
+      else
+! 	frp = newwin->w_frame;
+      frp->fr_parent = curfrp->fr_parent;
+  
+      /* Insert the new frame at the right place in the frame list. */
+--- 972,981 ----
+  		frp->fr_parent = curfrp;
+      }
+  
+!     if (new_wp == NULL)
+  	frp = wp->w_frame;
+      else
+! 	frp = new_wp->w_frame;
+      frp->fr_parent = curfrp->fr_parent;
+  
+      /* Insert the new frame at the right place in the frame list. */
+***************
+*** 4284,4302 ****
+      win_T	*after UNUSED;
+      int		hidden UNUSED;
+  {
+!     win_T	*newwin;
+  
+      /*
+       * allocate window structure and linesizes arrays
+       */
+!     newwin = (win_T *)alloc_clear((unsigned)sizeof(win_T));
+!     if (newwin != NULL && win_alloc_lines(newwin) == FAIL)
+      {
+! 	vim_free(newwin);
+! 	newwin = NULL;
+      }
+  
+!     if (newwin != NULL)
+      {
+  #ifdef FEAT_AUTOCMD
+  	/* Don't execute autocommands while the window is not properly
+--- 4284,4302 ----
+      win_T	*after UNUSED;
+      int		hidden UNUSED;
+  {
+!     win_T	*new_wp;
+  
+      /*
+       * allocate window structure and linesizes arrays
+       */
+!     new_wp = (win_T *)alloc_clear((unsigned)sizeof(win_T));
+!     if (new_wp != NULL && win_alloc_lines(new_wp) == FAIL)
+      {
+! 	vim_free(new_wp);
+! 	new_wp = NULL;
+      }
+  
+!     if (new_wp != NULL)
+      {
+  #ifdef FEAT_AUTOCMD
+  	/* Don't execute autocommands while the window is not properly
+***************
+*** 4309,4361 ****
+  	 */
+  #ifdef FEAT_WINDOWS
+  	if (!hidden)
+! 	    win_append(after, newwin);
+  #endif
+  #ifdef FEAT_VERTSPLIT
+! 	newwin->w_wincol = 0;
+! 	newwin->w_width = Columns;
+  #endif
+  
+  	/* position the display and the cursor at the top of the file. */
+! 	newwin->w_topline = 1;
+  #ifdef FEAT_DIFF
+! 	newwin->w_topfill = 0;
+  #endif
+! 	newwin->w_botline = 2;
+! 	newwin->w_cursor.lnum = 1;
+  #ifdef FEAT_SCROLLBIND
+! 	newwin->w_scbind_pos = 1;
+  #endif
+  
+  	/* We won't calculate w_fraction until resizing the window */
+! 	newwin->w_fraction = 0;
+! 	newwin->w_prev_fraction_row = -1;
+  
+  #ifdef FEAT_GUI
+  	if (gui.in_use)
+  	{
+! 	    gui_create_scrollbar(&newwin->w_scrollbars[SBAR_LEFT],
+! 		    SBAR_LEFT, newwin);
+! 	    gui_create_scrollbar(&newwin->w_scrollbars[SBAR_RIGHT],
+! 		    SBAR_RIGHT, newwin);
+  	}
+  #endif
+  #ifdef FEAT_EVAL
+  	/* init w: variables */
+! 	init_var_dict(&newwin->w_vars, &newwin->w_winvar);
+  #endif
+  #ifdef FEAT_FOLDING
+! 	foldInitWin(newwin);
+  #endif
+  #ifdef FEAT_AUTOCMD
+  	unblock_autocmds();
+  #endif
+  #ifdef FEAT_SEARCH_EXTRA
+! 	newwin->w_match_head = NULL;
+! 	newwin->w_next_match_id = 4;
+  #endif
+      }
+!     return newwin;
+  }
+  
+  #if defined(FEAT_WINDOWS) || defined(PROTO)
+--- 4309,4361 ----
+  	 */
+  #ifdef FEAT_WINDOWS
+  	if (!hidden)
+! 	    win_append(after, new_wp);
+  #endif
+  #ifdef FEAT_VERTSPLIT
+! 	new_wp->w_wincol = 0;
+! 	new_wp->w_width = Columns;
+  #endif
+  
+  	/* position the display and the cursor at the top of the file. */
+! 	new_wp->w_topline = 1;
+  #ifdef FEAT_DIFF
+! 	new_wp->w_topfill = 0;
+  #endif
+! 	new_wp->w_botline = 2;
+! 	new_wp->w_cursor.lnum = 1;
+  #ifdef FEAT_SCROLLBIND
+! 	new_wp->w_scbind_pos = 1;
+  #endif
+  
+  	/* We won't calculate w_fraction until resizing the window */
+! 	new_wp->w_fraction = 0;
+! 	new_wp->w_prev_fraction_row = -1;
+  
+  #ifdef FEAT_GUI
+  	if (gui.in_use)
+  	{
+! 	    gui_create_scrollbar(&new_wp->w_scrollbars[SBAR_LEFT],
+! 		    SBAR_LEFT, new_wp);
+! 	    gui_create_scrollbar(&new_wp->w_scrollbars[SBAR_RIGHT],
+! 		    SBAR_RIGHT, new_wp);
+  	}
+  #endif
+  #ifdef FEAT_EVAL
+  	/* init w: variables */
+! 	init_var_dict(&new_wp->w_vars, &new_wp->w_winvar);
+  #endif
+  #ifdef FEAT_FOLDING
+! 	foldInitWin(new_wp);
+  #endif
+  #ifdef FEAT_AUTOCMD
+  	unblock_autocmds();
+  #endif
+  #ifdef FEAT_SEARCH_EXTRA
+! 	new_wp->w_match_head = NULL;
+! 	new_wp->w_next_match_id = 4;
+  #endif
+      }
+!     return new_wp;
+  }
+  
+  #if defined(FEAT_WINDOWS) || defined(PROTO)
+*** ../vim-7.3.399/src/version.c	2012-01-10 18:37:53.000000000 +0100
+--- src/version.c	2012-01-10 22:23:10.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     400,
+  /**/
+
+-- 
+A parent can be arrested if his child cannot hold back a burp during a church
+service.
+		[real standing law in Nebraska, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.401 b/source/ap/vim/patches/7.3.401
new file mode 100644
index 00000000..6a473c57
--- /dev/null
+++ b/source/ap/vim/patches/7.3.401
@@ -0,0 +1,191 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.401
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.401
+Problem:    A couple more shadowed variables.
+Solution:   Rename the variables.
+Files:	    src/netbeans.c
+
+
+*** ../vim-7.3.400/src/netbeans.c	2012-01-10 22:26:12.000000000 +0100
+--- src/netbeans.c	2012-01-10 22:30:17.000000000 +0100
+***************
+*** 443,449 ****
+      FILE *fp;
+      char_u buf[BUFSIZ];
+      char_u *lp;
+!     char_u *nl;
+  #ifdef UNIX
+      struct stat	st;
+  
+--- 443,449 ----
+      FILE *fp;
+      char_u buf[BUFSIZ];
+      char_u *lp;
+!     char_u *nlp;
+  #ifdef UNIX
+      struct stat	st;
+  
+***************
+*** 472,479 ****
+      /* Read the file. There should be one of each parameter */
+      while ((lp = (char_u *)fgets((char *)buf, BUFSIZ, fp)) != NULL)
+      {
+! 	if ((nl = vim_strchr(lp, '\n')) != NULL)
+! 	    *nl = 0;	    /* strip off the trailing newline */
+  
+  	if (STRNCMP(lp, "host=", 5) == 0)
+  	{
+--- 472,479 ----
+      /* Read the file. There should be one of each parameter */
+      while ((lp = (char_u *)fgets((char *)buf, BUFSIZ, fp)) != NULL)
+      {
+! 	if ((nlp = vim_strchr(lp, '\n')) != NULL)
+! 	    *nlp = 0;	    /* strip off the trailing newline */
+  
+  	if (STRNCMP(lp, "host=", 5) == 0)
+  	{
+***************
+*** 1740,1746 ****
+  		int	added = 0;
+  		int	oldFire = netbeansFireChanges;
+  		int	old_b_changed;
+! 		char_u	*nl;
+  		linenr_T lnum;
+  		linenr_T lnum_start;
+  		pos_T	*pos;
+--- 1740,1746 ----
+  		int	added = 0;
+  		int	oldFire = netbeansFireChanges;
+  		int	old_b_changed;
+! 		char_u	*nlp;
+  		linenr_T lnum;
+  		linenr_T lnum_start;
+  		pos_T	*pos;
+***************
+*** 1780,1787 ****
+  		do_update = 1;
+  		while (*args != NUL)
+  		{
+! 		    nl = vim_strchr(args, '\n');
+! 		    if (nl == NULL)
+  		    {
+  			/* Incomplete line, probably truncated.  Next "insert"
+  			 * command should append to this one. */
+--- 1780,1787 ----
+  		do_update = 1;
+  		while (*args != NUL)
+  		{
+! 		    nlp = vim_strchr(args, '\n');
+! 		    if (nlp == NULL)
+  		    {
+  			/* Incomplete line, probably truncated.  Next "insert"
+  			 * command should append to this one. */
+***************
+*** 1789,1801 ****
+  		    }
+  		    else
+  		    {
+! 			len = nl - args;
+  
+  			/*
+  			 * We need to detect EOL style, because the commands
+  			 * use a character offset.
+  			 */
+! 			if (nl > args && nl[-1] == '\r')
+  			{
+  			    ff_detected = EOL_DOS;
+  			    --len;
+--- 1789,1801 ----
+  		    }
+  		    else
+  		    {
+! 			len = nlp - args;
+  
+  			/*
+  			 * We need to detect EOL style, because the commands
+  			 * use a character offset.
+  			 */
+! 			if (nlp > args && nlp[-1] == '\r')
+  			{
+  			    ff_detected = EOL_DOS;
+  			    --len;
+***************
+*** 1814,1820 ****
+  
+  			/* Insert halfway a line.  For simplicity we assume we
+  			 * need to append to the line. */
+! 			newline = alloc_check((unsigned)(STRLEN(oldline) + len + 1));
+  			if (newline != NULL)
+  			{
+  			    STRCPY(newline, oldline);
+--- 1814,1821 ----
+  
+  			/* Insert halfway a line.  For simplicity we assume we
+  			 * need to append to the line. */
+! 			newline = alloc_check(
+! 				       (unsigned)(STRLEN(oldline) + len + 1));
+  			if (newline != NULL)
+  			{
+  			    STRCPY(newline, oldline);
+***************
+*** 1826,1839 ****
+  		    {
+  			/* Append a new line.  Not that we always do this,
+  			 * also when the text doesn't end in a "\n". */
+! 			ml_append((linenr_T)(lnum - 1), args, (colnr_T)(len + 1), FALSE);
+  			++added;
+  		    }
+  
+! 		    if (nl == NULL)
+  			break;
+  		    ++lnum;
+! 		    args = nl + 1;
+  		}
+  
+  		/* Adjust the marks below the inserted lines. */
+--- 1827,1841 ----
+  		    {
+  			/* Append a new line.  Not that we always do this,
+  			 * also when the text doesn't end in a "\n". */
+! 			ml_append((linenr_T)(lnum - 1), args,
+! 						   (colnr_T)(len + 1), FALSE);
+  			++added;
+  		    }
+  
+! 		    if (nlp == NULL)
+  			break;
+  		    ++lnum;
+! 		    args = nlp + 1;
+  		}
+  
+  		/* Adjust the marks below the inserted lines. */
+*** ../vim-7.3.400/src/version.c	2012-01-10 22:26:12.000000000 +0100
+--- src/version.c	2012-01-10 22:30:47.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     401,
+  /**/
+
+-- 
+So when I saw the post to comp.editors, I rushed over to the FTP site to
+grab it.  So I yank apart the tarball, light x candles, where x= the
+vim version multiplied by the md5sum of the source divided by the MAC of
+my NIC (8A3FA78155A8A1D346C3C4A), put on black robes, dim the lights,
+wave a dead chicken over the hard drive, and summon the power of GNU GCC
+with the magic words "make config ; make!".
+		[Jason Spence, compiling Vim 5.0]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.402 b/source/ap/vim/patches/7.3.402
new file mode 100644
index 00000000..a5501f8c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.402
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.402
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.402
+Problem:    When jumping to the first error a line of the buffer is sometimes
+	    redrawn on top of the list of errors.
+Solution:   Do not call update_topline_redraw() if the display was scrolled
+	    up.
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.401/src/quickfix.c	2012-01-10 17:13:48.000000000 +0100
+--- src/quickfix.c	2012-01-20 13:13:25.000000000 +0100
+***************
+*** 1842,1849 ****
+  #endif
+  	if (print_message)
+  	{
+! 	    /* Update the screen before showing the message */
+! 	    update_topline_redraw();
+  	    sprintf((char *)IObuff, _("(%d of %d)%s%s: "), qf_index,
+  		    qi->qf_lists[qi->qf_curlist].qf_count,
+  		    qf_ptr->qf_cleared ? _(" (line deleted)") : "",
+--- 1842,1851 ----
+  #endif
+  	if (print_message)
+  	{
+! 	    /* Update the screen before showing the message, unless the screen
+! 	     * scrolled up. */
+! 	    if (!msg_scrolled)
+! 		update_topline_redraw();
+  	    sprintf((char *)IObuff, _("(%d of %d)%s%s: "), qf_index,
+  		    qi->qf_lists[qi->qf_curlist].qf_count,
+  		    qf_ptr->qf_cleared ? _(" (line deleted)") : "",
+*** ../vim-7.3.401/src/version.c	2012-01-10 22:31:26.000000000 +0100
+--- src/version.c	2012-01-20 13:17:50.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     402,
+  /**/
+
+-- 
+If all you have is a hammer, everything looks like a nail.
+When your hammer is C++, everything begins to look like a thumb.
+			-- Steve Hoflich, comp.lang.c++
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.403 b/source/ap/vim/patches/7.3.403
new file mode 100644
index 00000000..bc3bf549
--- /dev/null
+++ b/source/ap/vim/patches/7.3.403
@@ -0,0 +1,108 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.403
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.403
+Problem:    ":helpgrep" does not trigger QuickFixCmd* autocommands.
+Solution:   Trigger the autocommands. (Christian Brabandt)
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.402/src/quickfix.c	2012-01-20 13:28:28.000000000 +0100
+--- src/quickfix.c	2012-01-20 13:37:10.000000000 +0100
+***************
+*** 3878,3893 ****
+      qf_info_T	*qi = &ql_info;
+      int		new_qi = FALSE;
+      win_T	*wp;
+! 
+!     /* Make 'cpoptions' empty, the 'l' flag should not be used here. */
+!     save_cpo = p_cpo;
+!     p_cpo = empty_option;
+  
+  #ifdef FEAT_MULTI_LANG
+      /* Check for a specified language */
+      lang = check_help_lang(eap->arg);
+  #endif
+  
+      if (eap->cmdidx == CMD_lhelpgrep)
+      {
+  	/* Find an existing help window */
+--- 3878,3912 ----
+      qf_info_T	*qi = &ql_info;
+      int		new_qi = FALSE;
+      win_T	*wp;
+! #ifdef FEAT_AUTOCMD
+!     char_u	*au_name =  NULL;
+! #endif
+  
+  #ifdef FEAT_MULTI_LANG
+      /* Check for a specified language */
+      lang = check_help_lang(eap->arg);
+  #endif
+  
++ #ifdef FEAT_AUTOCMD
++     switch (eap->cmdidx)
++     {
++ 	case CMD_helpgrep:  au_name = (char_u *)"helpgrep"; break;
++ 	case CMD_lhelpgrep: au_name = (char_u *)"lhelpgrep"; break;
++ 	default: break;
++     }
++     if (au_name != NULL)
++     {
++ 	apply_autocmds(EVENT_QUICKFIXCMDPRE, au_name,
++ 					       curbuf->b_fname, TRUE, curbuf);
++ 	if (did_throw || force_abort)
++ 	    return;
++     }
++ #endif
++ 
++     /* Make 'cpoptions' empty, the 'l' flag should not be used here. */
++     save_cpo = p_cpo;
++     p_cpo = empty_option;
++ 
+      if (eap->cmdidx == CMD_lhelpgrep)
+      {
+  	/* Find an existing help window */
+***************
+*** 4036,4041 ****
+--- 4055,4071 ----
+      qf_update_buffer(qi);
+  #endif
+  
++ #ifdef FEAT_AUTOCMD
++     if (au_name != NULL)
++     {
++ 	apply_autocmds(EVENT_QUICKFIXCMDPOST, au_name,
++ 					       curbuf->b_fname, TRUE, curbuf);
++ 	if (!new_qi && qi != &ql_info && qf_find_buf(qi) == NULL)
++ 	    /* autocommands made "qi" invalid */
++ 	    return;
++     }
++ #endif
++ 
+      /* Jump to first match. */
+      if (qi->qf_lists[qi->qf_curlist].qf_count > 0)
+  	qf_jump(qi, 0, 0, FALSE);
+*** ../vim-7.3.402/src/version.c	2012-01-20 13:28:28.000000000 +0100
+--- src/version.c	2012-01-20 13:30:37.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     403,
+  /**/
+
+-- 
+Looking at Perl through Lisp glasses, Perl looks atrocious.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.404 b/source/ap/vim/patches/7.3.404
new file mode 100644
index 00000000..445d7051
--- /dev/null
+++ b/source/ap/vim/patches/7.3.404
@@ -0,0 +1,85 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.404
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.404
+Problem:    When a complete function uses refresh "always" redo will not work
+	    properly.
+Solution:   Do not reset compl_leader when compl_opt_refresh_always is set.
+	    (Yasuhiro Matsumoto)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.403/src/edit.c	2012-01-10 22:26:12.000000000 +0100
+--- src/edit.c	2012-01-20 14:26:06.000000000 +0100
+***************
+*** 3465,3475 ****
+      if (ins_compl_need_restart())
+  	ins_compl_restart();
+  
+!     vim_free(compl_leader);
+!     compl_leader = vim_strnsave(ml_get_curline() + compl_col,
+  				     (int)(curwin->w_cursor.col - compl_col));
+!     if (compl_leader != NULL)
+! 	ins_compl_new_leader();
+  }
+  
+  /*
+--- 3465,3481 ----
+      if (ins_compl_need_restart())
+  	ins_compl_restart();
+  
+!     /* When 'always' is set, don't reset compl_leader. While completing,
+!      * cursor don't point original position, changing compl_leader would
+!      * break redo. */
+!     if (!compl_opt_refresh_always)
+!     {
+! 	vim_free(compl_leader);
+! 	compl_leader = vim_strnsave(ml_get_curline() + compl_col,
+  				     (int)(curwin->w_cursor.col - compl_col));
+! 	if (compl_leader != NULL)
+! 	    ins_compl_new_leader();
+!     }
+  }
+  
+  /*
+***************
+*** 4554,4559 ****
+--- 4560,4570 ----
+      int	    found_end = FALSE;
+      int	    advance;
+  
++     /* When user complete function return -1 for findstart which is next
++      * time of 'always', compl_shown_match become NULL. */
++     if (compl_shown_match == NULL)
++ 	return -1;
++ 
+      if (compl_leader != NULL
+  			&& (compl_shown_match->cp_flags & ORIGINAL_TEXT) == 0)
+      {
+*** ../vim-7.3.403/src/version.c	2012-01-20 13:39:03.000000000 +0100
+--- src/version.c	2012-01-20 14:31:26.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     404,
+  /**/
+
+-- 
+ARTHUR: I've said I'm sorry about the old woman, but from the behind you
+        looked ...
+DENNIS: What I object to is that you automatically treat me like an inferior...
+ARTHUR: Well ... I AM king.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.405 b/source/ap/vim/patches/7.3.405
new file mode 100644
index 00000000..087aecc4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.405
@@ -0,0 +1,101 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.405
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.405
+Problem:    When xterm gets back the function keys it may delete the urxvt
+	    mouse termcap code.
+Solution:   Check for the whole code, not just the start. (Egmont Koblinger)
+Files:	    src/keymap.h, src/misc2.c, src/term.c
+
+
+*** ../vim-7.3.404/src/keymap.h	2011-10-20 21:09:25.000000000 +0200
+--- src/keymap.h	2012-01-20 16:35:43.000000000 +0100
+***************
+*** 411,416 ****
+--- 411,417 ----
+  #define K_DEC_MOUSE	TERMCAP2KEY(KS_DEC_MOUSE, KE_FILLER)
+  #define K_JSBTERM_MOUSE	TERMCAP2KEY(KS_JSBTERM_MOUSE, KE_FILLER)
+  #define K_PTERM_MOUSE	TERMCAP2KEY(KS_PTERM_MOUSE, KE_FILLER)
++ #define K_URXVT_MOUSE	TERMCAP2KEY(KS_URXVT_MOUSE, KE_FILLER)
+  
+  #define K_SELECT	TERMCAP2KEY(KS_SELECT, KE_FILLER)
+  #define K_TEAROFF	TERMCAP2KEY(KS_TEAROFF, KE_FILLER)
+*** ../vim-7.3.404/src/misc2.c	2012-01-10 22:26:12.000000000 +0100
+--- src/misc2.c	2012-01-20 16:38:27.000000000 +0100
+***************
+*** 2416,2425 ****
+--- 2416,2436 ----
+      {'<',		(char_u *)"lt"},
+  
+      {K_MOUSE,		(char_u *)"Mouse"},
++ #ifdef FEAT_MOUSE_NET
+      {K_NETTERM_MOUSE,	(char_u *)"NetMouse"},
++ #endif
++ #ifdef FEAT_MOUSE_DEC
+      {K_DEC_MOUSE,	(char_u *)"DecMouse"},
++ #endif
++ #ifdef FEAT_MOUSE_JSB
+      {K_JSBTERM_MOUSE,	(char_u *)"JsbMouse"},
++ #endif
++ #ifdef FEAT_MOUSE_PTERM
+      {K_PTERM_MOUSE,	(char_u *)"PtermMouse"},
++ #endif
++ #ifdef FEAT_MOUSE_URXVT
++     {K_URXVT_MOUSE,	(char_u *)"UrxvtMouse"},
++ #endif
+      {K_LEFTMOUSE,	(char_u *)"LeftMouse"},
+      {K_LEFTMOUSE_NM,	(char_u *)"LeftMouseNM"},
+      {K_LEFTDRAG,	(char_u *)"LeftDrag"},
+*** ../vim-7.3.404/src/term.c	2011-12-01 20:59:16.000000000 +0100
+--- src/term.c	2012-01-20 16:50:41.000000000 +0100
+***************
+*** 5252,5263 ****
+      char_u	*src;
+  {
+      int		i;
+!     int		slen;
+  
+      for (i = 0; i < tc_len; ++i)
+      {
+! 	slen = termcodes[i].len;
+! 	if (slen > 1 && STRNCMP(termcodes[i].code, src, (size_t)slen) == 0)
+  	    return i;
+      }
+      return -1;
+--- 5252,5263 ----
+      char_u	*src;
+  {
+      int		i;
+!     int		slen = STRLEN(src);
+  
+      for (i = 0; i < tc_len; ++i)
+      {
+! 	if (slen == termcodes[i].len
+! 			&& STRNCMP(termcodes[i].code, src, (size_t)slen) == 0)
+  	    return i;
+      }
+      return -1;
+*** ../vim-7.3.404/src/version.c	2012-01-20 14:32:22.000000000 +0100
+--- src/version.c	2012-01-20 16:59:47.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     405,
+  /**/
+
+-- 
+"The future's already arrived - it's just not evenly distributed yet."
+		-- William Gibson
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.406 b/source/ap/vim/patches/7.3.406
new file mode 100644
index 00000000..dceca0ed
--- /dev/null
+++ b/source/ap/vim/patches/7.3.406
@@ -0,0 +1,103 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.406
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.406
+Problem:    Multi-byte characters in b:browsefilter are not handled correctly.
+Solution:   First use convert_filter() normally and then convert to wide
+	    characters. (Taro Muraoka)
+Files:	    src/gui_w48.c
+
+
+*** ../vim-7.3.405/src/gui_w48.c	2011-09-07 18:58:24.000000000 +0200
+--- src/gui_w48.c	2012-01-20 17:54:19.000000000 +0100
+***************
+*** 328,333 ****
+--- 328,337 ----
+  static LRESULT _OnImeNotify(HWND hWnd, DWORD dwCommand, DWORD dwData);
+  #endif
+  
++ #if defined(FEAT_MBYTE) && defined(WIN3264)
++ static char_u *convert_filter(char_u *s);
++ #endif
++ 
+  #ifdef DEBUG_PRINT_ERROR
+  /*
+   * Print out the last Windows error message
+***************
+*** 3275,3302 ****
+  
+  # if defined(FEAT_MBYTE) && defined(WIN3264)
+  /*
+!  * Wide version of convert_filter().  Keep in sync!
+   */
+      static WCHAR *
+  convert_filterW(char_u *s)
+  {
+!     WCHAR	*res;
+!     unsigned	s_len = (unsigned)STRLEN(s);
+!     unsigned	i;
+  
+!     res = (WCHAR *)alloc((s_len + 3) * sizeof(WCHAR));
+!     if (res != NULL)
+!     {
+! 	for (i = 0; i < s_len; ++i)
+! 	    if (s[i] == '\t' || s[i] == '\n')
+! 		res[i] = '\0';
+! 	    else
+! 		res[i] = s[i];
+! 	res[s_len] = NUL;
+! 	/* Add two extra NULs to make sure it's properly terminated. */
+! 	res[s_len + 1] = NUL;
+! 	res[s_len + 2] = NUL;
+!     }
+      return res;
+  }
+  
+--- 3279,3298 ----
+  
+  # if defined(FEAT_MBYTE) && defined(WIN3264)
+  /*
+!  * Wide version of convert_filter().
+   */
+      static WCHAR *
+  convert_filterW(char_u *s)
+  {
+!     char_u *tmp;
+!     int len;
+  
+!     tmp = convert_filter(s);
+!     if (tmp == NULL)
+! 	return NULL;
+!     len = (int)STRLEN(s) + 3;
+!     res = enc_to_utf16(tmp, &len);
+!     vim_free(tmp);
+      return res;
+  }
+  
+*** ../vim-7.3.405/src/version.c	2012-01-20 17:15:47.000000000 +0100
+--- src/version.c	2012-01-20 17:57:09.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     406,
+  /**/
+
+-- 
+DENNIS: Look,  strange women lying on their backs in ponds handing out
+        swords ... that's no basis for a system of government.  Supreme
+        executive power derives from a mandate from the masses, not from some
+        farcical aquatic ceremony.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.407 b/source/ap/vim/patches/7.3.407
new file mode 100644
index 00000000..d5ac1330
--- /dev/null
+++ b/source/ap/vim/patches/7.3.407
@@ -0,0 +1,270 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.407
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.407
+Problem:    ":12verbose call F()" may duplicate text while trying to truncate.
+	    (Thinca)
+Solution:   Only truncate when there is not enough room.  Also check the byte
+	    length of the buffer.
+Files:	    src/buffer.c, src/eval.c, src/ex_getln.c, src/message.c,
+	    src/proto/message.pro
+
+
+*** ../vim-7.3.406/src/buffer.c	2011-12-30 13:39:04.000000000 +0100
+--- src/buffer.c	2012-01-20 18:37:43.000000000 +0100
+***************
+*** 3258,3266 ****
+  	    if (maxlen > 0)
+  	    {
+  		/* make it shorter by removing a bit in the middle */
+! 		len = vim_strsize(buf);
+! 		if (len > maxlen)
+! 		    trunc_string(buf, buf, maxlen);
+  	    }
+  	}
+      }
+--- 3258,3265 ----
+  	    if (maxlen > 0)
+  	    {
+  		/* make it shorter by removing a bit in the middle */
+! 		if (vim_strsize(buf) > maxlen)
+! 		    trunc_string(buf, buf, maxlen, IOSIZE);
+  	    }
+  	}
+      }
+*** ../vim-7.3.406/src/eval.c	2012-01-10 22:26:12.000000000 +0100
+--- src/eval.c	2012-01-20 20:43:32.000000000 +0100
+***************
+*** 22163,22170 ****
+  			s = tv2string(&argvars[i], &tofree, numbuf2, 0);
+  			if (s != NULL)
+  			{
+! 			    trunc_string(s, buf, MSG_BUF_CLEN);
+! 			    msg_puts(buf);
+  			    vim_free(tofree);
+  			}
+  		    }
+--- 22163,22174 ----
+  			s = tv2string(&argvars[i], &tofree, numbuf2, 0);
+  			if (s != NULL)
+  			{
+! 			    if (vim_strsize(s) > MSG_BUF_CLEN)
+! 			    {
+! 				trunc_string(s, buf, MSG_BUF_CLEN, MSG_BUF_LEN);
+! 				s = buf;
+! 			    }
+! 			    msg_puts(s);
+  			    vim_free(tofree);
+  			}
+  		    }
+***************
+*** 22252,22259 ****
+  	    s = tv2string(fc->rettv, &tofree, numbuf2, 0);
+  	    if (s != NULL)
+  	    {
+! 		trunc_string(s, buf, MSG_BUF_CLEN);
+! 		smsg((char_u *)_("%s returning %s"), sourcing_name, buf);
+  		vim_free(tofree);
+  	    }
+  	}
+--- 22256,22267 ----
+  	    s = tv2string(fc->rettv, &tofree, numbuf2, 0);
+  	    if (s != NULL)
+  	    {
+! 		if (vim_strsize(s) > MSG_BUF_CLEN)
+! 		{
+! 		    trunc_string(s, buf, MSG_BUF_CLEN, MSG_BUF_LEN);
+! 		    s = buf;
+! 		}
+! 		smsg((char_u *)_("%s returning %s"), sourcing_name, s);
+  		vim_free(tofree);
+  	    }
+  	}
+*** ../vim-7.3.406/src/ex_getln.c	2011-12-08 18:44:47.000000000 +0100
+--- src/ex_getln.c	2012-01-20 18:40:46.000000000 +0100
+***************
+*** 5923,5929 ****
+  							      hist[i].hisnum);
+  		    if (vim_strsize(hist[i].hisstr) > (int)Columns - 10)
+  			trunc_string(hist[i].hisstr, IObuff + STRLEN(IObuff),
+! 							   (int)Columns - 10);
+  		    else
+  			STRCAT(IObuff, hist[i].hisstr);
+  		    msg_outtrans(IObuff);
+--- 5923,5929 ----
+  							      hist[i].hisnum);
+  		    if (vim_strsize(hist[i].hisstr) > (int)Columns - 10)
+  			trunc_string(hist[i].hisstr, IObuff + STRLEN(IObuff),
+! 				  (int)Columns - 10, IOSIZE - STRLEN(IObuff));
+  		    else
+  			STRCAT(IObuff, hist[i].hisstr);
+  		    msg_outtrans(IObuff);
+*** ../vim-7.3.406/src/message.c	2012-01-10 22:26:12.000000000 +0100
+--- src/message.c	2012-01-20 20:38:29.000000000 +0100
+***************
+*** 222,236 ****
+  	    if (enc_utf8)
+  		/* may have up to 18 bytes per cell (6 per char, up to two
+  		 * composing chars) */
+! 		buf = alloc((room + 2) * 18);
+  	    else if (enc_dbcs == DBCS_JPNU)
+  		/* may have up to 2 bytes per cell for euc-jp */
+! 		buf = alloc((room + 2) * 2);
+  	    else
+  #endif
+! 		buf = alloc(room + 2);
+  	    if (buf != NULL)
+! 		trunc_string(s, buf, room);
+  	}
+      }
+      return buf;
+--- 222,237 ----
+  	    if (enc_utf8)
+  		/* may have up to 18 bytes per cell (6 per char, up to two
+  		 * composing chars) */
+! 		len = (room + 2) * 18;
+  	    else if (enc_dbcs == DBCS_JPNU)
+  		/* may have up to 2 bytes per cell for euc-jp */
+! 		len = (room + 2) * 2;
+  	    else
+  #endif
+! 		len = room + 2;
+! 	    buf = alloc(len);
+  	    if (buf != NULL)
+! 		trunc_string(s, buf, room, len);
+  	}
+      }
+      return buf;
+***************
+*** 241,250 ****
+   * "s" and "buf" may be equal.
+   */
+      void
+! trunc_string(s, buf, room)
+      char_u	*s;
+      char_u	*buf;
+      int		room;
+  {
+      int		half;
+      int		len;
+--- 242,252 ----
+   * "s" and "buf" may be equal.
+   */
+      void
+! trunc_string(s, buf, room, buflen)
+      char_u	*s;
+      char_u	*buf;
+      int		room;
++     int		buflen;
+  {
+      int		half;
+      int		len;
+***************
+*** 257,263 ****
+      len = 0;
+  
+      /* First part: Start of the string. */
+!     for (e = 0; len < half; ++e)
+      {
+  	if (s[e] == NUL)
+  	{
+--- 259,265 ----
+      len = 0;
+  
+      /* First part: Start of the string. */
+!     for (e = 0; len < half && e < buflen; ++e)
+      {
+  	if (s[e] == NUL)
+  	{
+***************
+*** 274,280 ****
+  	if (has_mbyte)
+  	    for (n = (*mb_ptr2len)(s + e); --n > 0; )
+  	    {
+! 		++e;
+  		buf[e] = s[e];
+  	    }
+  #endif
+--- 276,283 ----
+  	if (has_mbyte)
+  	    for (n = (*mb_ptr2len)(s + e); --n > 0; )
+  	    {
+! 		if (++e == buflen)
+! 		    break;
+  		buf[e] = s[e];
+  	    }
+  #endif
+***************
+*** 319,326 ****
+      }
+  
+      /* Set the middle and copy the last part. */
+!     mch_memmove(buf + e, "...", (size_t)3);
+!     STRMOVE(buf + e + 3, s + i);
+  }
+  
+  /*
+--- 322,340 ----
+      }
+  
+      /* Set the middle and copy the last part. */
+!     if (e + 3 < buflen)
+!     {
+! 	mch_memmove(buf + e, "...", (size_t)3);
+! 	len = STRLEN(s + i) + 1;
+! 	if (len >= buflen - e - 3)
+! 	    len = buflen - e - 3 - 1;
+! 	mch_memmove(buf + e + 3, s + i, len);
+! 	buf[e + 3 + len - 1] = NUL;
+!     }
+!     else
+!     {
+! 	buf[e - 1] = NUL;  // make sure it is truncated
+!     }
+  }
+  
+  /*
+*** ../vim-7.3.406/src/proto/message.pro	2011-01-17 20:08:03.000000000 +0100
+--- src/proto/message.pro	2012-01-20 18:51:19.000000000 +0100
+***************
+*** 4,10 ****
+  int msg_attr __ARGS((char_u *s, int attr));
+  int msg_attr_keep __ARGS((char_u *s, int attr, int keep));
+  char_u *msg_strtrunc __ARGS((char_u *s, int force));
+! void trunc_string __ARGS((char_u *s, char_u *buf, int room));
+  void reset_last_sourcing __ARGS((void));
+  void msg_source __ARGS((int attr));
+  int emsg_not_now __ARGS((void));
+--- 4,10 ----
+  int msg_attr __ARGS((char_u *s, int attr));
+  int msg_attr_keep __ARGS((char_u *s, int attr, int keep));
+  char_u *msg_strtrunc __ARGS((char_u *s, int force));
+! void trunc_string __ARGS((char_u *s, char_u *buf, int room, int buflen));
+  void reset_last_sourcing __ARGS((void));
+  void msg_source __ARGS((int attr));
+  int emsg_not_now __ARGS((void));
+*** ../vim-7.3.406/src/version.c	2012-01-20 17:57:47.000000000 +0100
+--- src/version.c	2012-01-20 20:42:23.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     407,
+  /**/
+
+-- 
+Hanson's Treatment of Time:
+	There are never enough hours in a day, but always too
+	many days before Saturday.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.408 b/source/ap/vim/patches/7.3.408
new file mode 100644
index 00000000..02276085
--- /dev/null
+++ b/source/ap/vim/patches/7.3.408
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.408
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.408 (after 7.3.406)
+Problem:    Missing declaration.
+Solution:   Add the declaration. (John Marriott)
+Files:	    src/gui_w48.c
+
+
+*** ../vim-7.3.407/src/gui_w48.c	2012-01-20 17:57:47.000000000 +0100
+--- src/gui_w48.c	2012-01-20 20:51:57.000000000 +0100
+***************
+*** 3286,3291 ****
+--- 3286,3292 ----
+  {
+      char_u *tmp;
+      int len;
++     WCHAR *res;
+  
+      tmp = convert_filter(s);
+      if (tmp == NULL)
+*** ../vim-7.3.407/src/version.c	2012-01-20 20:44:38.000000000 +0100
+--- src/version.c	2012-01-20 20:52:56.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     408,
+  /**/
+
+-- 
+BLACK KNIGHT: None shall pass.
+ARTHUR:       I have no quarrel with you, brave Sir knight, but I must cross
+              this bridge.
+BLACK KNIGHT: Then you shall die.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.409 b/source/ap/vim/patches/7.3.409
new file mode 100644
index 00000000..a00fdcb8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.409
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.409
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.409
+Problem:    The license in pty.c is unclear.
+Solution:   Add a comment about the license.
+Files:	    src/pty.c
+
+
+*** ../vim-7.3.408/src/pty.c	2011-05-19 13:40:47.000000000 +0200
+--- src/pty.c	2012-01-20 21:07:56.000000000 +0100
+***************
+*** 14,19 ****
+--- 14,23 ----
+   * It has been modified to work better with Vim.
+   * The parts that are not used in Vim have been deleted.
+   * See the "screen" sources for the complete stuff.
++  *
++  * This specific version is distibuted under the Vim license (attribution by
++  * Juergen Weigert), the GPL applies to the original version, see the
++  * copyright notice below.
+   */
+  
+  /* Copyright (c) 1993
+*** ../vim-7.3.408/src/version.c	2012-01-20 20:54:15.000000000 +0100
+--- src/version.c	2012-01-20 21:13:11.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     409,
+  /**/
+
+-- 
+ARTHUR: What are you going to do. bleed on me?
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.410 b/source/ap/vim/patches/7.3.410
new file mode 100644
index 00000000..f40e06fa
--- /dev/null
+++ b/source/ap/vim/patches/7.3.410
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.410
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.410
+Problem:    Compiler error for // comment. (Joachim Schmitz)
+Solution:   Turn into /* comment */.
+Files:	    src/message.c
+
+
+*** ../vim-7.3.409/src/message.c	2012-01-20 20:44:38.000000000 +0100
+--- src/message.c	2012-01-23 20:46:36.000000000 +0100
+***************
+*** 333,339 ****
+      }
+      else
+      {
+! 	buf[e - 1] = NUL;  // make sure it is truncated
+      }
+  }
+  
+--- 333,339 ----
+      }
+      else
+      {
+! 	buf[e - 1] = NUL;  /* make sure it is truncated */
+      }
+  }
+  
+*** ../vim-7.3.409/src/version.c	2012-01-20 21:13:55.000000000 +0100
+--- src/version.c	2012-01-23 20:47:30.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     410,
+  /**/
+
+
+-- 
+Are leaders born or made?  And if they're made, can we return them under
+warranty?
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.411 b/source/ap/vim/patches/7.3.411
new file mode 100644
index 00000000..fe759952
--- /dev/null
+++ b/source/ap/vim/patches/7.3.411
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.411
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.411
+Problem:    Pasting in Visual mode using the "" register does not work. (John
+	    Beckett)
+Solution:   Detect that the write is overwriting the pasted register.
+	    (Christian Brabandt)
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.410/src/normal.c	2011-10-04 21:22:40.000000000 +0200
+--- src/normal.c	2012-01-23 22:13:44.000000000 +0100
+***************
+*** 9329,9335 ****
+  # ifdef FEAT_CLIPBOARD
+  	    adjust_clip_reg(&regname);
+  # endif
+! 	    if (regname == 0 || VIM_ISDIGIT(regname)
+  # ifdef FEAT_CLIPBOARD
+  		    || (clip_unnamed && (regname == '*' || regname == '+'))
+  # endif
+--- 9329,9335 ----
+  # ifdef FEAT_CLIPBOARD
+  	    adjust_clip_reg(&regname);
+  # endif
+! 	    if (regname == 0 || regname == '"' || VIM_ISDIGIT(regname)
+  # ifdef FEAT_CLIPBOARD
+  		    || (clip_unnamed && (regname == '*' || regname == '+'))
+  # endif
+*** ../vim-7.3.410/src/version.c	2012-01-23 20:48:34.000000000 +0100
+--- src/version.c	2012-01-26 11:42:33.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     411,
+  /**/
+
+-- 
+Engineers understand that their appearance only bothers other people and
+therefore it is not worth optimizing.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.412 b/source/ap/vim/patches/7.3.412
new file mode 100644
index 00000000..3b181883
--- /dev/null
+++ b/source/ap/vim/patches/7.3.412
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.412
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.412
+Problem:    Storing a float in a session file has an additional '&'.
+Solution:   Remove the '&'. (Yasuhiro Matsumoto)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.411/src/eval.c	2012-01-20 20:44:38.000000000 +0100
+--- src/eval.c	2012-01-26 11:39:39.000000000 +0100
+***************
+*** 22929,22935 ****
+  		    f = -f;
+  		    sign = '-';
+  		}
+! 		if ((fprintf(fd, "let %s = %c&%f",
+  					       this_var->di_key, sign, f) < 0)
+  			|| put_eol(fd) == FAIL)
+  		    return FAIL;
+--- 22929,22935 ----
+  		    f = -f;
+  		    sign = '-';
+  		}
+! 		if ((fprintf(fd, "let %s = %c%f",
+  					       this_var->di_key, sign, f) < 0)
+  			|| put_eol(fd) == FAIL)
+  		    return FAIL;
+*** ../vim-7.3.411/src/version.c	2012-01-26 11:43:04.000000000 +0100
+--- src/version.c	2012-01-26 11:44:56.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     412,
+  /**/
+
+-- 
+Imagine a world without hypothetical situations.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.413 b/source/ap/vim/patches/7.3.413
new file mode 100644
index 00000000..c32c9b1d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.413
@@ -0,0 +1,90 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.413
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.413
+Problem:    Build warnings on MS-Windows.
+Solution:   Add type casts. (Mike Williams)
+Files:	    src/ex_getln.c, src/message.c, src/term.c
+
+
+*** ../vim-7.3.412/src/ex_getln.c	2012-01-20 20:44:38.000000000 +0100
+--- src/ex_getln.c	2012-01-26 12:58:54.000000000 +0100
+***************
+*** 5923,5929 ****
+  							      hist[i].hisnum);
+  		    if (vim_strsize(hist[i].hisstr) > (int)Columns - 10)
+  			trunc_string(hist[i].hisstr, IObuff + STRLEN(IObuff),
+! 				  (int)Columns - 10, IOSIZE - STRLEN(IObuff));
+  		    else
+  			STRCAT(IObuff, hist[i].hisstr);
+  		    msg_outtrans(IObuff);
+--- 5923,5929 ----
+  							      hist[i].hisnum);
+  		    if (vim_strsize(hist[i].hisstr) > (int)Columns - 10)
+  			trunc_string(hist[i].hisstr, IObuff + STRLEN(IObuff),
+! 			     (int)Columns - 10, IOSIZE - (int)STRLEN(IObuff));
+  		    else
+  			STRCAT(IObuff, hist[i].hisstr);
+  		    msg_outtrans(IObuff);
+*** ../vim-7.3.412/src/message.c	2012-01-23 20:48:34.000000000 +0100
+--- src/message.c	2012-01-26 12:58:54.000000000 +0100
+***************
+*** 325,331 ****
+      if (e + 3 < buflen)
+      {
+  	mch_memmove(buf + e, "...", (size_t)3);
+! 	len = STRLEN(s + i) + 1;
+  	if (len >= buflen - e - 3)
+  	    len = buflen - e - 3 - 1;
+  	mch_memmove(buf + e + 3, s + i, len);
+--- 325,331 ----
+      if (e + 3 < buflen)
+      {
+  	mch_memmove(buf + e, "...", (size_t)3);
+! 	len = (int)STRLEN(s + i) + 1;
+  	if (len >= buflen - e - 3)
+  	    len = buflen - e - 3 - 1;
+  	mch_memmove(buf + e + 3, s + i, len);
+*** ../vim-7.3.412/src/term.c	2012-01-20 17:15:47.000000000 +0100
+--- src/term.c	2012-01-26 12:58:54.000000000 +0100
+***************
+*** 5252,5258 ****
+      char_u	*src;
+  {
+      int		i;
+!     int		slen = STRLEN(src);
+  
+      for (i = 0; i < tc_len; ++i)
+      {
+--- 5252,5258 ----
+      char_u	*src;
+  {
+      int		i;
+!     int		slen = (int)STRLEN(src);
+  
+      for (i = 0; i < tc_len; ++i)
+      {
+*** ../vim-7.3.412/src/version.c	2012-01-26 11:45:25.000000000 +0100
+--- src/version.c	2012-01-26 12:59:14.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     413,
+  /**/
+
+-- 
+It doesn't really matter what you are able to do if you don't do it.
+				(Bram Moolenaar)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.414 b/source/ap/vim/patches/7.3.414
new file mode 100644
index 00000000..6f6c3075
--- /dev/null
+++ b/source/ap/vim/patches/7.3.414
@@ -0,0 +1,90 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.414
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.414
+Problem:    Using CTRL-A on "000" drops the leading zero, while on "001" it
+	    doesn't.
+Solution:   Detect "000" as an octal number. (James McCoy)
+Files:	    src/charset.c
+
+
+*** ../vim-7.3.413/src/charset.c	2012-01-10 22:26:12.000000000 +0100
+--- src/charset.c	2012-01-26 13:33:45.000000000 +0100
+***************
+*** 764,770 ****
+  }
+  
+  /*
+!  * Return the number of characters string "s" will take on the screen,
+   * counting TABs as two characters: "^I".
+   */
+      int
+--- 764,770 ----
+  }
+  
+  /*
+!  * Return the number of character cells string "s" will take on the screen,
+   * counting TABs as two characters: "^I".
+   */
+      int
+***************
+*** 775,782 ****
+  }
+  
+  /*
+!  * Return the number of characters string "s[len]" will take on the screen,
+!  * counting TABs as two characters: "^I".
+   */
+      int
+  vim_strnsize(s, len)
+--- 775,782 ----
+  }
+  
+  /*
+!  * Return the number of character cells string "s[len]" will take on the
+!  * screen, counting TABs as two characters: "^I".
+   */
+      int
+  vim_strnsize(s, len)
+***************
+*** 1830,1836 ****
+  			hex = 0;	/* can't be octal */
+  			break;
+  		    }
+! 		    if (ptr[n] > '0')
+  			hex = '0';	/* assume octal */
+  		}
+  	    }
+--- 1830,1836 ----
+  			hex = 0;	/* can't be octal */
+  			break;
+  		    }
+! 		    if (ptr[n] >= '0')
+  			hex = '0';	/* assume octal */
+  		}
+  	    }
+*** ../vim-7.3.413/src/version.c	2012-01-26 13:01:54.000000000 +0100
+--- src/version.c	2012-01-26 13:38:04.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     414,
+  /**/
+
+-- 
+No engineer can take a shower without wondering if some sort of Teflon coating
+would make showering unnecessary.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.415 b/source/ap/vim/patches/7.3.415
new file mode 100644
index 00000000..74e757b2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.415
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.415
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.415 (after 7.3.359)
+Problem:    Completion of functions stops once a dictionary is encountered.
+	    (James McCoy)
+Solution:   Return an empty string instead of NULL.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.414/src/eval.c	2012-01-26 11:45:25.000000000 +0100
+--- src/eval.c	2012-01-26 13:45:52.000000000 +0100
+***************
+*** 21802,21808 ****
+  	fp = HI2UF(hi);
+  
+  	if (fp->uf_flags & FC_DICT)
+! 	    return NULL; /* don't show dict functions */
+  
+  	if (STRLEN(fp->uf_name) + 4 >= IOSIZE)
+  	    return fp->uf_name;	/* prevents overflow */
+--- 21802,21808 ----
+  	fp = HI2UF(hi);
+  
+  	if (fp->uf_flags & FC_DICT)
+! 	    return ""; /* don't show dict functions */
+  
+  	if (STRLEN(fp->uf_name) + 4 >= IOSIZE)
+  	    return fp->uf_name;	/* prevents overflow */
+*** ../vim-7.3.414/src/version.c	2012-01-26 13:40:04.000000000 +0100
+--- src/version.c	2012-01-26 14:32:16.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     415,
+  /**/
+
+-- 
+Normal people believe that if it ain't broke, don't fix it.  Engineers believe
+that if it ain't broke, it doesn't have enough features yet.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.416 b/source/ap/vim/patches/7.3.416
new file mode 100644
index 00000000..f65bb0d2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.416
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.416
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.416 (after 7.3.415)
+Problem:    Compiler warning for wrong pointer.
+Solution:   Add type cast.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.415/src/eval.c	2012-01-26 14:32:26.000000000 +0100
+--- src/eval.c	2012-01-26 15:42:56.000000000 +0100
+***************
+*** 21802,21808 ****
+  	fp = HI2UF(hi);
+  
+  	if (fp->uf_flags & FC_DICT)
+! 	    return ""; /* don't show dict functions */
+  
+  	if (STRLEN(fp->uf_name) + 4 >= IOSIZE)
+  	    return fp->uf_name;	/* prevents overflow */
+--- 21802,21808 ----
+  	fp = HI2UF(hi);
+  
+  	if (fp->uf_flags & FC_DICT)
+! 	    return (char_u *)""; /* don't show dict functions */
+  
+  	if (STRLEN(fp->uf_name) + 4 >= IOSIZE)
+  	    return fp->uf_name;	/* prevents overflow */
+*** ../vim-7.3.415/src/version.c	2012-01-26 14:32:26.000000000 +0100
+--- src/version.c	2012-01-26 15:43:31.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     416,
+  /**/
+
+-- 
+It's totally unfair to suggest - as many have - that engineers are socially
+inept.  Engineers simply have different objectives when it comes to social
+interaction.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.417 b/source/ap/vim/patches/7.3.417
new file mode 100644
index 00000000..489d27eb
--- /dev/null
+++ b/source/ap/vim/patches/7.3.417
@@ -0,0 +1,47 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.417
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.417 (after 7.3.395)
+Problem:    Test 43 fails with a tiny build.
+Solution:   Only run test 43 with at least a small build.
+Files:	    src/testdir/test43.in
+
+
+*** ../vim-7.3.415/src/testdir/test43.in	2012-01-10 13:44:23.000000000 +0100
+--- src/testdir/test43.in	2012-01-26 18:00:06.000000000 +0100
+***************
+*** 1,6 ****
+--- 1,7 ----
+  Tests for regexp with various magic settings.
+  
+  STARTTEST
++ :so small.vim
+  :set nocompatible viminfo+=nviminfo
+  /^1
+  /a*b\{2}c\+/e
+*** ../vim-7.3.415/src/version.c	2012-01-26 14:32:26.000000000 +0100
+--- src/version.c	2012-01-26 18:02:30.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     417,
+  /**/
+
+-- 
+I learned the customs and mannerisms of engineers by observing them, much the
+way Jane Goodall learned about the great apes, but without the hassle of
+grooming.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.418 b/source/ap/vim/patches/7.3.418
new file mode 100644
index 00000000..6ff486b6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.418
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.418
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.418
+Problem:    When a user complete function returns -1 an error message is
+	    given.
+Solution:   When -2 is returned stop completion silently. (Yasuhiro Matsumoto)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.417/src/edit.c	2012-01-20 14:32:22.000000000 +0100
+--- src/edit.c	2012-01-26 18:32:23.000000000 +0100
+***************
+*** 5189,5194 ****
+--- 5189,5199 ----
+  		return FAIL;
+  	    }
+  
++ 	    /* Return value -2 means the user complete function wants to
++ 	     * cancel the complete without an error. */
++ 	    if (col == -2)
++ 		return FAIL;
++ 
+  	    /*
+  	     * Reset extended parameters of completion, when start new
+  	     * completion.
+*** ../vim-7.3.417/src/version.c	2012-01-26 18:58:13.000000000 +0100
+--- src/version.c	2012-01-26 18:42:14.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     418,
+  /**/
+
+-- 
+If someone questions your market projections, simply point out that your
+target market is "People who are nuts" and "People who will buy any damn
+thing".  Nobody is going to tell you there aren't enough of those people
+to go around.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.419 b/source/ap/vim/patches/7.3.419
new file mode 100644
index 00000000..865a47c7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.419
@@ -0,0 +1,85 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.419
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.419
+Problem:    DBCS encoding in a user command does not always work.
+Solution:   Skip over DBCS characters. (Yasuhiro Matsumoto)
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.418/src/ex_docmd.c	2011-12-14 14:49:41.000000000 +0100
+--- src/ex_docmd.c	2012-01-26 20:04:01.000000000 +0100
+***************
+*** 5967,5973 ****
+  	    result = STRLEN(eap->arg) + 2;
+  	    for (p = eap->arg; *p; ++p)
+  	    {
+! 		if (*p == '\\' || *p == '"')
+  		    ++result;
+  	    }
+  
+--- 5967,5980 ----
+  	    result = STRLEN(eap->arg) + 2;
+  	    for (p = eap->arg; *p; ++p)
+  	    {
+! #ifdef  FEAT_MBYTE
+! 		if (enc_dbcs != 0 && (*mb_ptr2len)(p) == 2)
+! 		    /* DBCS can contain \ in a trail byte, skip the
+! 		     * double-byte character. */
+! 		    ++p;
+! 		else
+! #endif
+! 		     if (*p == '\\' || *p == '"')
+  		    ++result;
+  	    }
+  
+***************
+*** 5976,5982 ****
+  		*buf++ = '"';
+  		for (p = eap->arg; *p; ++p)
+  		{
+! 		    if (*p == '\\' || *p == '"')
+  			*buf++ = '\\';
+  		    *buf++ = *p;
+  		}
+--- 5983,5996 ----
+  		*buf++ = '"';
+  		for (p = eap->arg; *p; ++p)
+  		{
+! #ifdef  FEAT_MBYTE
+! 		    if (enc_dbcs != 0 && (*mb_ptr2len)(p) == 2)
+! 			/* DBCS can contain \ in a trail byte, copy the
+! 			 * double-byte character to avoid escaping. */
+! 			*buf++ = *p++;
+! 		    else
+! #endif
+! 			 if (*p == '\\' || *p == '"')
+  			*buf++ = '\\';
+  		    *buf++ = *p;
+  		}
+*** ../vim-7.3.418/src/version.c	2012-01-26 18:58:25.000000000 +0100
+--- src/version.c	2012-01-26 20:40:34.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     419,
+  /**/
+
+-- 
+You have heard the saying that if you put a thousand monkeys in a room with a
+thousand typewriters and waited long enough, eventually you would have a room
+full of dead monkeys.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.420 b/source/ap/vim/patches/7.3.420
new file mode 100644
index 00000000..d698d0b4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.420
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.420
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.420
+Problem:    "it" and "at" don't work properly with a dash in the tag name.
+Solution:   Require a space to match the tag name. (Christian Brabandt)
+Files:	    src/search.c
+
+
+*** ../vim-7.3.419/src/search.c	2012-01-10 22:26:12.000000000 +0100
+--- src/search.c	2012-01-26 20:51:43.000000000 +0100
+***************
+*** 3918,3924 ****
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     spat = alloc(len + 29);
+      epat = alloc(len + 9);
+      if (spat == NULL || epat == NULL)
+      {
+--- 3918,3924 ----
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     spat = alloc(len + 31);
+      epat = alloc(len + 9);
+      if (spat == NULL || epat == NULL)
+      {
+***************
+*** 3927,3933 ****
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     sprintf((char *)spat, "<%.*s\\>\\%%(\\_[^>]\\{-}[^/]>\\|>\\)\\c", len, p);
+      sprintf((char *)epat, "</%.*s>\\c", len, p);
+  
+      r = do_searchpair(spat, (char_u *)"", epat, FORWARD, (char_u *)"",
+--- 3927,3933 ----
+  	curwin->w_cursor = old_pos;
+  	goto theend;
+      }
+!     sprintf((char *)spat, "<%.*s\\>\\%%(\\s\\_[^>]\\{-}[^/]>\\|>\\)\\c", len, p);
+      sprintf((char *)epat, "</%.*s>\\c", len, p);
+  
+      r = do_searchpair(spat, (char_u *)"", epat, FORWARD, (char_u *)"",
+*** ../vim-7.3.419/src/version.c	2012-01-26 20:41:22.000000000 +0100
+--- src/version.c	2012-01-26 20:51:16.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     420,
+  /**/
+
+-- 
+All good vision statements are created by groups of people with bloated
+bladders who would rather be doing anything else.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.421 b/source/ap/vim/patches/7.3.421
new file mode 100644
index 00000000..eadc29df
--- /dev/null
+++ b/source/ap/vim/patches/7.3.421
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.421
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.421
+Problem:    Get E832 when setting 'undofile' in vimrc and there is a file to
+	    be edited on the command line. (Toothpik)
+Solution:   Do not try reading the undo file for a file that wasn't loaded.
+Files:	    src/option.c
+
+
+*** ../vim-7.3.420/src/option.c	2012-01-10 22:26:12.000000000 +0100
+--- src/option.c	2012-01-28 17:55:24.000000000 +0100
+***************
+*** 7527,7536 ****
+  	{
+  	    /* When 'undofile' is set globally: for every buffer, otherwise
+  	     * only for the current buffer: Try to read in the undofile, if
+! 	     * one exists and the buffer wasn't changed. */
+  	    if ((curbuf == save_curbuf
+  				|| (opt_flags & OPT_GLOBAL) || opt_flags == 0)
+! 		    && !curbufIsChanged())
+  	    {
+  		u_compute_hash(hash);
+  		u_read_undo(NULL, hash, curbuf->b_fname);
+--- 7527,7537 ----
+  	{
+  	    /* When 'undofile' is set globally: for every buffer, otherwise
+  	     * only for the current buffer: Try to read in the undofile, if
+! 	     * one exists and the buffer wasn't changed and the buffer was
+! 	     * loaded. */
+  	    if ((curbuf == save_curbuf
+  				|| (opt_flags & OPT_GLOBAL) || opt_flags == 0)
+! 		    && !curbufIsChanged() && curbuf->b_ml.ml_mfp != NULL)
+  	    {
+  		u_compute_hash(hash);
+  		u_read_undo(NULL, hash, curbuf->b_fname);
+*** ../vim-7.3.420/src/version.c	2012-01-26 20:58:21.000000000 +0100
+--- src/version.c	2012-01-28 18:03:09.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     421,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+4. Your eyeglasses have a web site burned in on them.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.422 b/source/ap/vim/patches/7.3.422
new file mode 100644
index 00000000..7be4aebd
--- /dev/null
+++ b/source/ap/vim/patches/7.3.422
@@ -0,0 +1,94 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.422
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.422
+Problem:    Python 3 does not have __members__.
+Solution:   Add "name" and "number" in another way. (lilydjwg)
+Files:      src/if_py_both.h, src/if_python3.c
+
+
+*** ../vim-7.3.421/src/if_py_both.h	2011-09-07 19:30:17.000000000 +0200
+--- src/if_py_both.h	2012-02-04 19:59:43.000000000 +0100
+***************
+*** 1479,1484 ****
+--- 1479,1487 ----
+      {"append",	    BufferAppend,	1,	    "Append data to Vim buffer" },
+      {"mark",	    BufferMark,		1,	    "Return (row,col) representing position of named mark" },
+      {"range",	    BufferRange,	1,	    "Return a range object which represents the part of the given buffer between line numbers s and e" },
++ #if PY_VERSION_HEX >= 0x03000000
++     {"__dir__",	    BufferDir,		4,	    "List its attributes" },
++ #endif
+      { NULL,	    NULL,		0,	    NULL }
+  };
+  
+*** ../vim-7.3.421/src/if_python3.c	2011-09-14 18:59:35.000000000 +0200
+--- src/if_python3.c	2012-02-04 20:13:00.000000000 +0100
+***************
+*** 468,473 ****
+--- 468,474 ----
+  static PyObject *BufferNew (buf_T *);
+  static PyObject *WindowNew(win_T *);
+  static PyObject *LineToString(const char *);
++ static PyObject *BufferDir(PyObject *, PyObject *);
+  
+  static PyTypeObject RangeType;
+  
+***************
+*** 961,973 ****
+  	return Py_BuildValue("s", this->buf->b_ffname);
+      else if (strcmp(name, "number") == 0)
+  	return Py_BuildValue("n", this->buf->b_fnum);
+-     else if (strcmp(name,"__members__") == 0)
+- 	return Py_BuildValue("[ss]", "name", "number");
+      else
+  	return PyObject_GenericGetAttr(self, nameobj);
+  }
+  
+      static PyObject *
+  BufferRepr(PyObject *self)
+  {
+      static char repr[100];
+--- 962,979 ----
+  	return Py_BuildValue("s", this->buf->b_ffname);
+      else if (strcmp(name, "number") == 0)
+  	return Py_BuildValue("n", this->buf->b_fnum);
+      else
+  	return PyObject_GenericGetAttr(self, nameobj);
+  }
+  
+      static PyObject *
++ BufferDir(PyObject *self UNUSED, PyObject *args UNUSED)
++ {
++     return Py_BuildValue("[sssss]", "name", "number",
++ 						   "append", "mark", "range");
++ }
++ 
++     static PyObject *
+  BufferRepr(PyObject *self)
+  {
+      static char repr[100];
+*** ../vim-7.3.421/src/version.c	2012-01-28 18:03:30.000000000 +0100
+--- src/version.c	2012-02-04 20:14:58.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     422,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+15. Five days in advance, tell your friends you can't attend their
+    party because you're not in the mood.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.423 b/source/ap/vim/patches/7.3.423
new file mode 100644
index 00000000..74bf62d2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.423
@@ -0,0 +1,130 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.423
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.423 
+Problem:    Small mistakes in comments, proto and indent. 
+Solution:   Fix the mistakes. 
+Files:      src/ex_cmds2.c, src/structs.h, src/ui.c, src/proto/ex_docmd.pro 
+
+
+*** ../vim-7.3.422/src/ex_cmds2.c	2011-10-20 21:38:37.000000000 +0200
+--- src/ex_cmds2.c	2011-11-30 11:02:20.000000000 +0100
+***************
+*** 1939,1945 ****
+  }
+  
+  /*
+!  * Return TRUE if window "win" is editing then file at the current argument
+   * index.
+   */
+      static int
+--- 1939,1945 ----
+  }
+  
+  /*
+!  * Return TRUE if window "win" is editing the file at the current argument
+   * index.
+   */
+      static int
+*** ../vim-7.3.422/src/structs.h	2011-05-19 13:40:47.000000000 +0200
+--- src/structs.h	2011-09-10 13:48:53.000000000 +0200
+***************
+*** 1846,1852 ****
+  				       often, keep it the first item!) */
+  
+  #if defined(FEAT_SYN_HL) || defined(FEAT_SPELL)
+!     synblock_T	*w_s;
+  #endif
+  
+  #ifdef FEAT_WINDOWS
+--- 1846,1852 ----
+  				       often, keep it the first item!) */
+  
+  #if defined(FEAT_SYN_HL) || defined(FEAT_SPELL)
+!     synblock_T	*w_s;		    /* for :ownsyntax */
+  #endif
+  
+  #ifdef FEAT_WINDOWS
+*** ../vim-7.3.422/src/ui.c	2011-07-07 16:20:45.000000000 +0200
+--- src/ui.c	2012-01-21 14:03:42.000000000 +0100
+***************
+*** 2363,2376 ****
+  	       XtLastTimestampProcessed(XtDisplay(myShell)),
+  	       clip_x11_convert_selection_cb, clip_x11_lose_ownership_cb,
+  	       NULL) == False)
+! 	return FAIL;
+      }
+      else
+  #endif
+      {
+  	if (!XChangeProperty(XtDisplay(myShell), XtWindow(myShell),
+  		  cbd->sel_atom, timestamp_atom, 32, PropModeAppend, NULL, 0))
+! 	return FAIL;
+      }
+      /* Flush is required in a terminal as nothing else is doing it. */
+      XFlush(XtDisplay(myShell));
+--- 2363,2376 ----
+  	       XtLastTimestampProcessed(XtDisplay(myShell)),
+  	       clip_x11_convert_selection_cb, clip_x11_lose_ownership_cb,
+  	       NULL) == False)
+! 	    return FAIL;
+      }
+      else
+  #endif
+      {
+  	if (!XChangeProperty(XtDisplay(myShell), XtWindow(myShell),
+  		  cbd->sel_atom, timestamp_atom, 32, PropModeAppend, NULL, 0))
+! 	    return FAIL;
+      }
+      /* Flush is required in a terminal as nothing else is doing it. */
+      XFlush(XtDisplay(myShell));
+*** ../vim-7.3.422/src/proto/ex_docmd.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/ex_docmd.pro	2011-01-16 00:22:21.000000000 +0100
+***************
+*** 1,7 ****
+  /* ex_docmd.c */
+  void do_exmode __ARGS((int improved));
+  int do_cmdline_cmd __ARGS((char_u *cmd));
+! int do_cmdline __ARGS((char_u *cmdline, char_u *(*getline)(int, void *, int), void *cookie, int flags));
+  int getline_equal __ARGS((char_u *(*fgetline)(int, void *, int), void *cookie, char_u *(*func)(int, void *, int)));
+  void *getline_cookie __ARGS((char_u *(*fgetline)(int, void *, int), void *cookie));
+  int checkforcmd __ARGS((char_u **pp, char *cmd, int len));
+--- 1,7 ----
+  /* ex_docmd.c */
+  void do_exmode __ARGS((int improved));
+  int do_cmdline_cmd __ARGS((char_u *cmd));
+! int do_cmdline __ARGS((char_u *cmdline, char_u *(*fgetline)(int, void *, int), void *cookie, int flags));
+  int getline_equal __ARGS((char_u *(*fgetline)(int, void *, int), void *cookie, char_u *(*func)(int, void *, int)));
+  void *getline_cookie __ARGS((char_u *(*fgetline)(int, void *, int), void *cookie));
+  int checkforcmd __ARGS((char_u **pp, char *cmd, int len));
+*** ../vim-7.3.422/src/version.c	2012-02-04 20:17:21.000000000 +0100
+--- src/version.c	2012-02-04 21:56:43.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     423,
+  /**/
+
+-- 
+In many of the more relaxed civilizations on the Outer Eastern Rim of the
+Galaxy, "The Hitchhiker's Guide to the Galaxy" has already supplanted the
+great "Encyclopedia Galactica" as the standard repository of all knowledge
+and wisdom, for though it has many omissions and contains much that is
+apocryphal, or at least wildly inaccurate, it scores over the older, more
+pedestrian work in two important respects.
+First, it is slightly cheaper; and second, it has the words "DON'T PANIC"
+inscribed in large friendly letters on its cover.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.424 b/source/ap/vim/patches/7.3.424
new file mode 100644
index 00000000..61786ed8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.424
@@ -0,0 +1,62 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.424
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.424
+Problem:    Win16 version missing some functions.
+Solution:   Add #defines for the functions.
+Files:      src/gui_w16.c
+
+
+*** ../vim-7.3.423/src/gui_w16.c	2011-01-17 20:08:03.000000000 +0100
+--- src/gui_w16.c	2011-08-10 16:50:21.000000000 +0200
+***************
+*** 21,26 ****
+--- 21,32 ----
+   *
+   */
+  
++ /* Win16 doesn't use the "W" methods. */
++ #define pDispatchMessage DispatchMessage
++ #define pGetMessage GetMessage
++ #define pIsDialogMessage IsDialogMessage
++ #define pPeekMessage PeekMessage
++ 
+  /*
+   * Include the common stuff for MS-Windows GUI.
+   */
+*** ../vim-7.3.423/src/version.c	2012-02-04 21:57:44.000000000 +0100
+--- src/version.c	2012-02-04 22:01:13.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     424,
+  /**/
+
+-- 
+Now it is such a bizarrely improbable coincidence that anything as
+mind-bogglingly useful as the Babel fish could have evolved purely by chance
+that some thinkers have chosen to see it as a final and clinching proof of the
+NON-existence of God.
+The argument goes something like this: 'I refuse to prove that I exist,' says
+God, 'for proof denies faith, and without faith I am nothing.'
+'But,' says Man, 'the Babel fish is a dead giveaway, isn't it?  It could not
+have evolved by chance.  It proves you exist, and so therefore, by your own
+arguments, you don't.  QED.'
+'Oh dear,' says God, 'I hadn't thought of that,' and promptly vanishes in a
+puff of logic.
+'Oh, that was easy,' says Man, and for an encore goes on to prove that black
+is white and gets himself killed on the next pedestrian crossing.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.425 b/source/ap/vim/patches/7.3.425
new file mode 100644
index 00000000..aeadf3a3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.425
@@ -0,0 +1,78 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.425
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.425 (after 7.3.265)
+Problem:    Search history lines are duplicated. (Edwin Steiner)
+Solution:   Convert separator character from space to NUL.
+Files:      src/ex_getln.c
+
+
+*** ../vim-7.3.424/src/ex_getln.c	2012-01-26 13:01:54.000000000 +0100
+--- src/ex_getln.c	2012-02-04 22:27:43.000000000 +0100
+***************
+*** 6027,6034 ****
+  	val = viminfo_readstring(virp, 1, TRUE);
+  	if (val != NULL && *val != NUL)
+  	{
+  	    if (!in_history(type, val + (type == HIST_SEARCH),
+! 						  viminfo_add_at_front, *val))
+  	    {
+  		/* Need to re-allocate to append the separator byte. */
+  		len = STRLEN(val);
+--- 6027,6036 ----
+  	val = viminfo_readstring(virp, 1, TRUE);
+  	if (val != NULL && *val != NUL)
+  	{
++ 	    int sep = (*val == ' ' ? NUL : *val);
++ 
+  	    if (!in_history(type, val + (type == HIST_SEARCH),
+! 						   viminfo_add_at_front, sep))
+  	    {
+  		/* Need to re-allocate to append the separator byte. */
+  		len = STRLEN(val);
+***************
+*** 6040,6046 ****
+  			/* Search entry: Move the separator from the first
+  			 * column to after the NUL. */
+  			mch_memmove(p, val + 1, (size_t)len);
+! 			p[len] = (*val == ' ' ? NUL : *val);
+  		    }
+  		    else
+  		    {
+--- 6042,6048 ----
+  			/* Search entry: Move the separator from the first
+  			 * column to after the NUL. */
+  			mch_memmove(p, val + 1, (size_t)len);
+! 			p[len] = sep;
+  		    }
+  		    else
+  		    {
+*** ../vim-7.3.424/src/version.c	2012-02-04 22:01:44.000000000 +0100
+--- src/version.c	2012-02-04 22:30:36.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     425,
+  /**/
+
+-- 
+"So this is it," said Arthur, "we are going to die."
+"Yes," said Ford, "except...no!  Wait a minute!"  He suddenly lunged across
+the chamber at something behind Arthur's line of vision.  "What's this
+switch?" he cried.
+"What?   Where?" cried Arthur, twisting around.
+"No, I was only fooling," said Ford, "we are going to die after all."
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.426 b/source/ap/vim/patches/7.3.426
new file mode 100644
index 00000000..76380af1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.426
@@ -0,0 +1,279 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.426
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.426
+Problem:    With '$' in 'cpoptions' the $ is not displayed in the first
+            column.
+Solution:   Use -1 instead of 0 as a special value. (Hideki Eiraku and
+            Hirohito Higashi)
+Files:      src/edit.c, src/globals.h, src/move.c, src/screen.c, src/search.c 
+    
+
+*** ../vim-7.3.425/src/edit.c	2012-01-26 18:58:25.000000000 +0100
+--- src/edit.c	2012-02-04 23:23:45.000000000 +0100
+***************
+*** 1763,1771 ****
+      static void
+  undisplay_dollar()
+  {
+!     if (dollar_vcol)
+      {
+! 	dollar_vcol = 0;
+  	redrawWinline(curwin->w_cursor.lnum, FALSE);
+      }
+  }
+--- 1763,1771 ----
+      static void
+  undisplay_dollar()
+  {
+!     if (dollar_vcol >= 0)
+      {
+! 	dollar_vcol = -1;
+  	redrawWinline(curwin->w_cursor.lnum, FALSE);
+      }
+  }
+***************
+*** 5441,5447 ****
+  				compl_curr_match->cp_number);
+  		edit_submode_extra = match_ref;
+  		edit_submode_highl = HLF_R;
+! 		if (dollar_vcol)
+  		    curs_columns(FALSE);
+  	    }
+  	}
+--- 5441,5447 ----
+  				compl_curr_match->cp_number);
+  		edit_submode_extra = match_ref;
+  		edit_submode_highl = HLF_R;
+! 		if (dollar_vcol >= 0)
+  		    curs_columns(FALSE);
+  	    }
+  	}
+***************
+*** 8961,8967 ****
+       * We can emulate the vi behaviour by pretending there is a dollar
+       * displayed even when there isn't.
+       *  --pkv Sun Jan 19 01:56:40 EST 2003 */
+!     if (vim_strchr(p_cpo, CPO_BACKSPACE) != NULL && dollar_vcol == 0)
+  	dollar_vcol = curwin->w_virtcol;
+  
+  #ifdef FEAT_FOLDING
+--- 8961,8967 ----
+       * We can emulate the vi behaviour by pretending there is a dollar
+       * displayed even when there isn't.
+       *  --pkv Sun Jan 19 01:56:40 EST 2003 */
+!     if (vim_strchr(p_cpo, CPO_BACKSPACE) != NULL && dollar_vcol == -1)
+  	dollar_vcol = curwin->w_virtcol;
+  
+  #ifdef FEAT_FOLDING
+*** ../vim-7.3.425/src/globals.h	2011-05-10 16:41:13.000000000 +0200
+--- src/globals.h	2012-02-04 23:24:07.000000000 +0100
+***************
+*** 113,121 ****
+   * When '$' is included in 'cpoptions' option set:
+   * When a change command is given that deletes only part of a line, a dollar
+   * is put at the end of the changed text. dollar_vcol is set to the virtual
+!  * column of this '$'.
+   */
+! EXTERN colnr_T	dollar_vcol INIT(= 0);
+  
+  #ifdef FEAT_INS_EXPAND
+  /*
+--- 113,121 ----
+   * When '$' is included in 'cpoptions' option set:
+   * When a change command is given that deletes only part of a line, a dollar
+   * is put at the end of the changed text. dollar_vcol is set to the virtual
+!  * column of this '$'.  -1 is used to indicate no $ is being displayed.
+   */
+! EXTERN colnr_T	dollar_vcol INIT(= -1);
+  
+  #ifdef FEAT_INS_EXPAND
+  /*
+*** ../vim-7.3.425/src/move.c	2012-01-10 22:26:12.000000000 +0100
+--- src/move.c	2012-02-04 23:21:08.000000000 +0100
+***************
+*** 362,368 ****
+  #endif
+  	    )
+      {
+! 	dollar_vcol = 0;
+  	if (curwin->w_skipcol != 0)
+  	{
+  	    curwin->w_skipcol = 0;
+--- 362,368 ----
+  #endif
+  	    )
+      {
+! 	dollar_vcol = -1;
+  	if (curwin->w_skipcol != 0)
+  	{
+  	    curwin->w_skipcol = 0;
+***************
+*** 966,972 ****
+  
+      /* remove '$' from change command when cursor moves onto it */
+      if (startcol > dollar_vcol)
+! 	dollar_vcol = 0;
+  
+      extra = curwin_col_off();
+      curwin->w_wcol = curwin->w_virtcol + extra;
+--- 966,972 ----
+  
+      /* remove '$' from change command when cursor moves onto it */
+      if (startcol > dollar_vcol)
+! 	dollar_vcol = -1;
+  
+      extra = curwin_col_off();
+      curwin->w_wcol = curwin->w_virtcol + extra;
+*** ../vim-7.3.425/src/screen.c	2012-01-10 22:26:12.000000000 +0100
+--- src/screen.c	2012-02-04 23:22:44.000000000 +0100
+***************
+*** 1637,1647 ****
+  	     * When at start of changed lines: May scroll following lines
+  	     * up or down to minimize redrawing.
+  	     * Don't do this when the change continues until the end.
+! 	     * Don't scroll when dollar_vcol is non-zero, keep the "$".
+  	     */
+  	    if (lnum == mod_top
+  		    && mod_bot != MAXLNUM
+! 		    && !(dollar_vcol != 0 && mod_bot == mod_top + 1))
+  	    {
+  		int		old_rows = 0;
+  		int		new_rows = 0;
+--- 1637,1647 ----
+  	     * When at start of changed lines: May scroll following lines
+  	     * up or down to minimize redrawing.
+  	     * Don't do this when the change continues until the end.
+! 	     * Don't scroll when dollar_vcol >= 0, keep the "$".
+  	     */
+  	    if (lnum == mod_top
+  		    && mod_bot != MAXLNUM
+! 		    && !(dollar_vcol >= 0 && mod_bot == mod_top + 1))
+  	    {
+  		int		old_rows = 0;
+  		int		new_rows = 0;
+***************
+*** 1868,1879 ****
+  	    if (row > wp->w_height)	/* past end of screen */
+  	    {
+  		/* we may need the size of that too long line later on */
+! 		if (dollar_vcol == 0)
+  		    wp->w_lines[idx].wl_size = plines_win(wp, lnum, TRUE);
+  		++idx;
+  		break;
+  	    }
+! 	    if (dollar_vcol == 0)
+  		wp->w_lines[idx].wl_size = row - srow;
+  	    ++idx;
+  #ifdef FEAT_FOLDING
+--- 1868,1879 ----
+  	    if (row > wp->w_height)	/* past end of screen */
+  	    {
+  		/* we may need the size of that too long line later on */
+! 		if (dollar_vcol == -1)
+  		    wp->w_lines[idx].wl_size = plines_win(wp, lnum, TRUE);
+  		++idx;
+  		break;
+  	    }
+! 	    if (dollar_vcol == -1)
+  		wp->w_lines[idx].wl_size = row - srow;
+  	    ++idx;
+  #ifdef FEAT_FOLDING
+***************
+*** 1990,1996 ****
+  	    }
+  #endif
+  	}
+! 	else if (dollar_vcol == 0)
+  	    wp->w_botline = lnum;
+  
+  	/* make sure the rest of the screen is blank */
+--- 1990,1996 ----
+  	    }
+  #endif
+  	}
+! 	else if (dollar_vcol == -1)
+  	    wp->w_botline = lnum;
+  
+  	/* make sure the rest of the screen is blank */
+***************
+*** 2005,2011 ****
+      wp->w_old_botfill = wp->w_botfill;
+  #endif
+  
+!     if (dollar_vcol == 0)
+      {
+  	/*
+  	 * There is a trick with w_botline.  If we invalidate it on each
+--- 2005,2011 ----
+      wp->w_old_botfill = wp->w_botfill;
+  #endif
+  
+!     if (dollar_vcol == -1)
+      {
+  	/*
+  	 * There is a trick with w_botline.  If we invalidate it on each
+***************
+*** 3564,3570 ****
+  	}
+  
+  	/* When still displaying '$' of change command, stop at cursor */
+! 	if (dollar_vcol != 0 && wp == curwin
+  		   && lnum == wp->w_cursor.lnum && vcol >= (long)wp->w_virtcol
+  #ifdef FEAT_DIFF
+  				   && filler_todo <= 0
+--- 3564,3570 ----
+  	}
+  
+  	/* When still displaying '$' of change command, stop at cursor */
+! 	if (dollar_vcol >= 0 && wp == curwin
+  		   && lnum == wp->w_cursor.lnum && vcol >= (long)wp->w_virtcol
+  #ifdef FEAT_DIFF
+  				   && filler_todo <= 0
+*** ../vim-7.3.425/src/search.c	2012-01-26 20:58:21.000000000 +0100
+--- src/search.c	2012-02-04 23:23:10.000000000 +0100
+***************
+*** 2501,2508 ****
+  	    save_siso = p_siso;
+  	    /* Handle "$" in 'cpo': If the ')' is typed on top of the "$",
+  	     * stop displaying the "$". */
+! 	    if (dollar_vcol > 0 && dollar_vcol == curwin->w_virtcol)
+! 		dollar_vcol = 0;
+  	    ++curwin->w_virtcol;	/* do display ')' just before "$" */
+  	    update_screen(VALID);	/* show the new char first */
+  
+--- 2501,2508 ----
+  	    save_siso = p_siso;
+  	    /* Handle "$" in 'cpo': If the ')' is typed on top of the "$",
+  	     * stop displaying the "$". */
+! 	    if (dollar_vcol >= 0 && dollar_vcol == curwin->w_virtcol)
+! 		dollar_vcol = -1;
+  	    ++curwin->w_virtcol;	/* do display ')' just before "$" */
+  	    update_screen(VALID);	/* show the new char first */
+  
+*** ../vim-7.3.425/src/version.c	2012-02-04 22:44:27.000000000 +0100
+--- src/version.c	2012-02-04 23:32:55.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     426,
+  /**/
+
+
+-- 
+I am also told that there is a logical proof out there somewhere
+that demonstrates that there is no task which duct tape cannot handle.
+					-- Paul Brannan
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.427 b/source/ap/vim/patches/7.3.427
new file mode 100644
index 00000000..61df8812
--- /dev/null
+++ b/source/ap/vim/patches/7.3.427
@@ -0,0 +1,378 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.427
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.427
+Problem:    readfile() can be slow with long lines.
+Solution:   Use realloc() instead of alloc(). (John Little)
+Files:      src/eval.c
+
+
+*** ../vim-7.3.426/src/eval.c	2012-01-26 14:32:26.000000000 +0100
+--- src/eval.c	2012-02-05 00:25:39.000000000 +0100
+***************
+*** 14325,14346 ****
+      typval_T	*rettv;
+  {
+      int		binary = FALSE;
+      char_u	*fname;
+      FILE	*fd;
+!     listitem_T	*li;
+! #define FREAD_SIZE 200	    /* optimized for text lines */
+!     char_u	buf[FREAD_SIZE];
+!     int		readlen;    /* size of last fread() */
+!     int		buflen;	    /* nr of valid chars in buf[] */
+!     int		filtd;	    /* how much in buf[] was NUL -> '\n' filtered */
+!     int		tolist;	    /* first byte in buf[] still to be put in list */
+!     int		chop;	    /* how many CR to chop off */
+!     char_u	*prev = NULL;	/* previously read bytes, if any */
+!     int		prevlen = 0;    /* length of "prev" if not NULL */
+!     char_u	*s;
+!     int		len;
+!     long	maxline = MAXLNUM;
+!     long	cnt = 0;
+  
+      if (argvars[1].v_type != VAR_UNKNOWN)
+      {
+--- 14325,14343 ----
+      typval_T	*rettv;
+  {
+      int		binary = FALSE;
++     int		failed = FALSE;
+      char_u	*fname;
+      FILE	*fd;
+!     char_u	buf[(IOSIZE/256)*256];	/* rounded to avoid odd + 1 */
+!     int		io_size = sizeof(buf);
+!     int		readlen;		/* size of last fread() */
+!     char_u	*prev	 = NULL;	/* previously read bytes, if any */
+!     long	prevlen  = 0;		/* length of data in prev */
+!     long	prevsize = 0;		/* size of prev buffer */
+!     long	maxline  = MAXLNUM;
+!     long	cnt	 = 0;
+!     char_u	*p;			/* position in buf */
+!     char_u	*start;			/* start of current line */
+  
+      if (argvars[1].v_type != VAR_UNKNOWN)
+      {
+***************
+*** 14362,14410 ****
+  	return;
+      }
+  
+-     filtd = 0;
+      while (cnt < maxline || maxline < 0)
+      {
+! 	readlen = (int)fread(buf + filtd, 1, FREAD_SIZE - filtd, fd);
+! 	buflen = filtd + readlen;
+! 	tolist = 0;
+! 	for ( ; filtd < buflen || readlen <= 0; ++filtd)
+! 	{
+! 	    if (readlen <= 0 || buf[filtd] == '\n')
+! 	    {
+! 		/* In binary mode add an empty list item when the last
+! 		 * non-empty line ends in a '\n'. */
+! 		if (!binary && readlen == 0 && filtd == 0 && prev == NULL)
+! 		    break;
+  
+! 		/* Found end-of-line or end-of-file: add a text line to the
+! 		 * list. */
+! 		chop = 0;
+! 		if (!binary)
+! 		    while (filtd - chop - 1 >= tolist
+! 					  && buf[filtd - chop - 1] == '\r')
+! 			++chop;
+! 		len = filtd - tolist - chop;
+! 		if (prev == NULL)
+! 		    s = vim_strnsave(buf + tolist, len);
+  		else
+  		{
+! 		    s = alloc((unsigned)(prevlen + len + 1));
+! 		    if (s != NULL)
+  		    {
+! 			mch_memmove(s, prev, prevlen);
+! 			vim_free(prev);
+! 			prev = NULL;
+! 			mch_memmove(s + prevlen, buf + tolist, len);
+  			s[prevlen + len] = NUL;
+  		    }
+  		}
+! 		tolist = filtd + 1;
+  
+! 		li = listitem_alloc();
+! 		if (li == NULL)
+  		{
+  		    vim_free(s);
+  		    break;
+  		}
+  		li->li_tv.v_type = VAR_STRING;
+--- 14359,14419 ----
+  	return;
+      }
+  
+      while (cnt < maxline || maxline < 0)
+      {
+! 	readlen = (int)fread(buf, 1, io_size, fd);
+! 
+! 	/* This for loop processes what was read, but is also entered at end
+! 	 * of file so that either:
+! 	 * - an incomplete line gets written
+! 	 * - a "binary" file gets an empty line at the end if it ends in a
+! 	 *   newline.  */
+! 	for (p = buf, start = buf;
+! 		p < buf + readlen || (readlen <= 0 && (prevlen > 0 || binary));
+! 		++p)
+! 	{
+! 	    if (*p == '\n' || readlen <= 0)
+! 	    {
+! 		listitem_T  *li;
+! 		char_u	    *s	= NULL;
+! 		long_u	    len = p - start;
+  
+! 		/* Finished a line.  Remove CRs before NL. */
+! 		if (readlen > 0 && !binary)
+! 		{
+! 		    while (len > 0 && start[len - 1] == '\r')
+! 			--len;
+! 		    /* removal may cross back to the "prev" string */
+! 		    if (len == 0)
+! 			while (prevlen > 0 && prev[prevlen - 1] == '\r')
+! 			    --prevlen;
+! 		}
+! 		if (prevlen == 0)
+! 		    s = vim_strnsave(start, len);
+  		else
+  		{
+! 		    /* Change "prev" buffer to be the right size.  This way
+! 		     * the bytes are only copied once, and very long lines are
+! 		     * allocated only once.  */
+! 		    if ((s = vim_realloc(prev, prevlen + len + 1)) != NULL)
+  		    {
+! 			mch_memmove(s + prevlen, start, len);
+  			s[prevlen + len] = NUL;
++ 			prev = NULL; /* the list will own the string */
++ 			prevlen = prevsize = 0;
+  		    }
+  		}
+! 		if (s == NULL)
+! 		{
+! 		    do_outofmem_msg((long_u) prevlen + len + 1);
+! 		    failed = TRUE;
+! 		    break;
+! 		}
+  
+! 		if ((li = listitem_alloc()) == NULL)
+  		{
+  		    vim_free(s);
++ 		    failed = TRUE;
+  		    break;
+  		}
+  		li->li_tv.v_type = VAR_STRING;
+***************
+*** 14412,14485 ****
+  		li->li_tv.vval.v_string = s;
+  		list_append(rettv->vval.v_list, li);
+  
+! 		if (++cnt >= maxline && maxline >= 0)
+! 		    break;
+! 		if (readlen <= 0)
+  		    break;
+  	    }
+! 	    else if (buf[filtd] == NUL)
+! 		buf[filtd] = '\n';
+  #ifdef FEAT_MBYTE
+! 	    else if (buf[filtd] == 0xef
+! 		    && enc_utf8
+! 		    && filtd + 2 < buflen
+! 		    && !binary
+! 		    && buf[filtd + 1] == 0xbb
+! 		    && buf[filtd + 2] == 0xbf)
+! 	    {
+! 		/* remove utf-8 byte order mark */
+! 		mch_memmove(buf + filtd, buf + filtd + 3, buflen - filtd - 3);
+! 		--filtd;
+! 		buflen -= 3;
+  	    }
+  #endif
+! 	}
+! 	if (readlen <= 0)
+! 	    break;
+  
+! 	if (tolist == 0)
+  	{
+! 	    if (buflen >= FREAD_SIZE / 2)
+  	    {
+! 		/* "buf" is full, need to move text to an allocated buffer */
+! 		if (prev == NULL)
+  		{
+! 		    prev = vim_strnsave(buf, buflen);
+! 		    prevlen = buflen;
+  		}
+! 		else
+  		{
+! 		    s = alloc((unsigned)(prevlen + buflen));
+! 		    if (s != NULL)
+! 		    {
+! 			mch_memmove(s, prev, prevlen);
+! 			mch_memmove(s + prevlen, buf, buflen);
+! 			vim_free(prev);
+! 			prev = s;
+! 			prevlen += buflen;
+! 		    }
+  		}
+! 		filtd = 0;
+  	    }
+  	}
+! 	else
+! 	{
+! 	    mch_memmove(buf, buf + tolist, buflen - tolist);
+! 	    filtd -= tolist;
+! 	}
+!     }
+  
+      /*
+       * For a negative line count use only the lines at the end of the file,
+       * free the rest.
+       */
+!     if (maxline < 0)
+  	while (cnt > -maxline)
+  	{
+  	    listitem_remove(rettv->vval.v_list, rettv->vval.v_list->lv_first);
+  	    --cnt;
+  	}
+  
+      vim_free(prev);
+      fclose(fd);
+  }
+--- 14421,14529 ----
+  		li->li_tv.vval.v_string = s;
+  		list_append(rettv->vval.v_list, li);
+  
+! 		start = p + 1; /* step over newline */
+! 		if ((++cnt >= maxline && maxline >= 0) || readlen <= 0)
+  		    break;
+  	    }
+! 	    else if (*p == NUL)
+! 		*p = '\n';
+  #ifdef FEAT_MBYTE
+! 	    /* Check for utf8 "bom"; U+FEFF is encoded as EF BB BF.  Do this
+! 	     * when finding the BF and check the previous two bytes. */
+! 	    else if (*p == 0xbf && enc_utf8 && !binary)
+! 	    {
+! 		/* Find the two bytes before the 0xbf.	If p is at buf, or buf
+! 		 * + 1, these may be in the "prev" string. */
+! 		char_u back1 = p >= buf + 1 ? p[-1]
+! 				     : prevlen >= 1 ? prev[prevlen - 1] : NUL;
+! 		char_u back2 = p >= buf + 2 ? p[-2]
+! 			  : p == buf + 1 && prevlen >= 1 ? prev[prevlen - 1]
+! 			  : prevlen >= 2 ? prev[prevlen - 2] : NUL;
+! 
+! 		if (back2 == 0xef && back1 == 0xbb)
+! 		{
+! 		    char_u *dest = p - 2;
+! 
+! 		    /* Usually a BOM is at the beginning of a file, and so at
+! 		     * the beginning of a line; then we can just step over it.
+! 		     */
+! 		    if (start == dest)
+! 			start = p + 1;
+! 		    else
+! 		    {
+! 			/* have to shuffle buf to close gap */
+! 			int adjust_prevlen = 0;
+! 
+! 			if (dest < buf)
+! 			{
+! 			    adjust_prevlen = buf - dest; /* must be 1 or 2 */
+! 			    dest = buf;
+! 			}
+! 			if (readlen > p - buf + 1)
+! 			    mch_memmove(dest, p + 1, readlen - (p - buf) - 1);
+! 			readlen -= 3 - adjust_prevlen;
+! 			prevlen -= adjust_prevlen;
+! 			p = dest - 1;
+! 		    }
+! 		}
+  	    }
+  #endif
+! 	} /* for */
+  
+! 	if (failed || (cnt >= maxline && maxline >= 0) || readlen <= 0)
+! 	    break;
+! 	if (start < p)
+  	{
+! 	    /* There's part of a line in buf, store it in "prev". */
+! 	    if (p - start + prevlen >= prevsize)
+  	    {
+! 		/* need bigger "prev" buffer */
+! 		char_u *newprev;
+! 
+! 		/* A common use case is ordinary text files and "prev" gets a
+! 		 * fragment of a line, so the first allocation is made
+! 		 * small, to avoid repeatedly 'allocing' large and
+! 		 * 'reallocing' small. */
+! 		if (prevsize == 0)
+! 		    prevsize = p - start;
+! 		else
+  		{
+! 		    long grow50pc = (prevsize * 3) / 2;
+! 		    long growmin  = (p - start) * 2 + prevlen;
+! 		    prevsize = grow50pc > growmin ? grow50pc : growmin;
+  		}
+! 		if ((newprev = vim_realloc(prev, prevsize)) == NULL)
+  		{
+! 		    do_outofmem_msg((long_u)prevsize);
+! 		    failed = TRUE;
+! 		    break;
+  		}
+! 		prev = newprev;
+  	    }
++ 	    /* Add the line part to end of "prev". */
++ 	    mch_memmove(prev + prevlen, start, p - start);
++ 	    prevlen += p - start;
+  	}
+!     } /* while */
+  
+      /*
+       * For a negative line count use only the lines at the end of the file,
+       * free the rest.
+       */
+!     if (!failed && maxline < 0)
+  	while (cnt > -maxline)
+  	{
+  	    listitem_remove(rettv->vval.v_list, rettv->vval.v_list->lv_first);
+  	    --cnt;
+  	}
+  
++     if (failed)
++     {
++ 	list_free(rettv->vval.v_list, TRUE);
++ 	/* readfile doc says an empty list is returned on error */
++ 	rettv->vval.v_list = list_alloc();
++     }
++ 
+      vim_free(prev);
+      fclose(fd);
+  }
+*** ../vim-7.3.426/src/version.c	2012-02-04 23:34:57.000000000 +0100
+--- src/version.c	2012-02-05 00:38:34.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     427,
+  /**/
+
+-- 
+One difference between a man and a machine is that a machine is quiet
+when well oiled.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.428 b/source/ap/vim/patches/7.3.428
new file mode 100644
index 00000000..89567ed8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.428
@@ -0,0 +1,113 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.428
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.428 
+Problem:    Win32: an xpm file without a mask crashes Vim.
+Solution:   Fail when the mask is missing. (Dave Bodenstab)
+Files:      src/xpm_w32.c
+ 
+
+*** ../vim-7.3.427/src/xpm_w32.c	2010-08-15 21:57:25.000000000 +0200
+--- src/xpm_w32.c	2012-02-05 00:46:13.000000000 +0100
+***************
+*** 1,4 ****
+! /*
+   * Load XPM image.
+   *
+   * This function is placed in separate file because Xpm headers conflict with
+--- 1,5 ----
+! /* vi:set ts=8 sts=4 sw=4:
+!  *
+   * Load XPM image.
+   *
+   * This function is placed in separate file because Xpm headers conflict with
+***************
+*** 30,38 ****
+  #include "xpm.h"
+  
+  /*
+!  * Tries to load Xpm image from file 'filename'.
+!  * If fails return -1.
+!  * success - 0 and image and mask BITMAPS
+   */
+      int
+  LoadXpmImage(filename, hImage, hShape)
+--- 31,40 ----
+  #include "xpm.h"
+  
+  /*
+!  * Tries to load an Xpm image from the file "filename".
+!  * Returns -1 on failure.
+!  * Returns 0 on success and stores image and mask BITMAPS in "hImage" and
+!  * "hShape".
+   */
+      int
+  LoadXpmImage(filename, hImage, hShape)
+***************
+*** 40,46 ****
+      HBITMAP *hImage;
+      HBITMAP *hShape;
+  {
+!     XImage	    *img;   /* loaded image */
+      XImage	    *shp;  /* shapeimage */
+      XpmAttributes   attr;
+      int		    res;
+--- 42,48 ----
+      HBITMAP *hImage;
+      HBITMAP *hShape;
+  {
+!     XImage	    *img;  /* loaded image */
+      XImage	    *shp;  /* shapeimage */
+      XpmAttributes   attr;
+      int		    res;
+***************
+*** 51,60 ****
+      DeleteDC(hdc);
+      if (res < 0)
+  	return -1;
+!     else
+      {
+! 	*hImage = img->bitmap;
+! 	*hShape = shp->bitmap;
+! 	return 0;
+      }
+  }
+--- 53,65 ----
+      DeleteDC(hdc);
+      if (res < 0)
+  	return -1;
+!     if (shp == NULL)
+      {
+!         if (img)
+! 	    XDestroyImage(img);
+! 	return -1;
+      }
++     *hImage = img->bitmap;
++     *hShape = shp->bitmap;
++     return 0;
+  }
+*** ../vim-7.3.427/src/version.c	2012-02-05 00:39:14.000000000 +0100
+--- src/version.c	2012-02-05 00:47:08.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     428,
+  /**/
+
+-- 
+I'm not familiar with this proof, but I'm aware of a significant
+following of toddlers who believe that peanut butter is the solution
+to all of life's problems... 		-- Tim Hammerquist
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.429 b/source/ap/vim/patches/7.3.429
new file mode 100644
index 00000000..801e25f9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.429
@@ -0,0 +1,192 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.429
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.429
+Problem:    When 'cpoptions' includes "E" "c0" in the first column is an
+            error. The redo register is then set to the errornous command.
+Solution:   Do not set the redo register if the command fails because of an
+            empty region. (Hideki Eiraku)
+Files:      src/getchar.c, src/normal.c, src/proto/getchar.pro
+
+
+*** ../vim-7.3.428/src/getchar.c	2012-01-10 22:26:12.000000000 +0100
+--- src/getchar.c	2012-02-05 01:05:09.000000000 +0100
+***************
+*** 470,475 ****
+--- 470,493 ----
+      }
+  }
+  
++ /*
++  * Discard the contents of the redo buffer and restore the previous redo
++  * buffer.
++  */
++     void
++ CancelRedo()
++ {
++     if (!block_redo)
++     {
++ 	free_buff(&redobuff);
++ 	redobuff = old_redobuff;
++ 	old_redobuff.bh_first.b_next = NULL;
++ 	start_stuff();
++ 	while (read_stuff(TRUE) != NUL)
++ 	    ;
++     }
++ }
++ 
+  #if defined(FEAT_AUTOCMD) || defined(FEAT_EVAL) || defined(PROTO)
+  /*
+   * Save redobuff and old_redobuff to save_redobuff and save_old_redobuff.
+***************
+*** 691,699 ****
+   * Read a character from the redo buffer.  Translates K_SPECIAL, CSI and
+   * multibyte characters.
+   * The redo buffer is left as it is.
+!  * if init is TRUE, prepare for redo, return FAIL if nothing to redo, OK
+!  * otherwise
+!  * if old is TRUE, use old_redobuff instead of redobuff
+   */
+      static int
+  read_redo(init, old_redo)
+--- 709,717 ----
+   * Read a character from the redo buffer.  Translates K_SPECIAL, CSI and
+   * multibyte characters.
+   * The redo buffer is left as it is.
+!  * If init is TRUE, prepare for redo, return FAIL if nothing to redo, OK
+!  * otherwise.
+!  * If old is TRUE, use old_redobuff instead of redobuff.
+   */
+      static int
+  read_redo(init, old_redo)
+*** ../vim-7.3.428/src/normal.c	2012-01-26 11:43:04.000000000 +0100
+--- src/normal.c	2012-02-05 01:06:01.000000000 +0100
+***************
+*** 1978,1984 ****
+--- 1978,1987 ----
+  	    VIsual_reselect = FALSE;	    /* don't reselect now */
+  #endif
+  	    if (empty_region_error)
++ 	    {
+  		vim_beep();
++ 		CancelRedo();
++ 	    }
+  	    else
+  	    {
+  		(void)op_delete(oap);
+***************
+*** 1992,1998 ****
+--- 1995,2004 ----
+  	    if (empty_region_error)
+  	    {
+  		if (!gui_yank)
++ 		{
+  		    vim_beep();
++ 		    CancelRedo();
++ 		}
+  	    }
+  	    else
+  		(void)op_yank(oap, FALSE, !gui_yank);
+***************
+*** 2004,2010 ****
+--- 2010,2019 ----
+  	    VIsual_reselect = FALSE;	    /* don't reselect now */
+  #endif
+  	    if (empty_region_error)
++ 	    {
+  		vim_beep();
++ 		CancelRedo();
++ 	    }
+  	    else
+  	    {
+  		/* This is a new edit command, not a restart.  Need to
+***************
+*** 2066,2072 ****
+--- 2075,2084 ----
+  	case OP_LOWER:
+  	case OP_ROT13:
+  	    if (empty_region_error)
++ 	    {
+  		vim_beep();
++ 		CancelRedo();
++ 	    }
+  	    else
+  		op_tilde(oap);
+  	    check_cursor_col();
+***************
+*** 2099,2105 ****
+--- 2111,2120 ----
+  #endif
+  #ifdef FEAT_VISUALEXTRA
+  	    if (empty_region_error)
++ 	    {
+  		vim_beep();
++ 		CancelRedo();
++ 	    }
+  	    else
+  	    {
+  		/* This is a new edit command, not a restart.  Need to
+***************
+*** 2129,2135 ****
+--- 2144,2153 ----
+  #ifdef FEAT_VISUALEXTRA
+  	    if (empty_region_error)
+  #endif
++ 	    {
+  		vim_beep();
++ 		CancelRedo();
++ 	    }
+  #ifdef FEAT_VISUALEXTRA
+  	    else
+  		op_replace(oap, cap->nchar);
+*** ../vim-7.3.428/src/proto/getchar.pro	2010-10-20 21:22:17.000000000 +0200
+--- src/proto/getchar.pro	2012-02-05 01:05:20.000000000 +0100
+***************
+*** 4,11 ****
+  char_u *get_inserted __ARGS((void));
+  int stuff_empty __ARGS((void));
+  void typeahead_noflush __ARGS((int c));
+! void flush_buffers __ARGS((int typeahead));
+  void ResetRedobuff __ARGS((void));
+  void saveRedobuff __ARGS((void));
+  void restoreRedobuff __ARGS((void));
+  void AppendToRedobuff __ARGS((char_u *s));
+--- 4,12 ----
+  char_u *get_inserted __ARGS((void));
+  int stuff_empty __ARGS((void));
+  void typeahead_noflush __ARGS((int c));
+! void flush_buffers __ARGS((int flush_typeahead));
+  void ResetRedobuff __ARGS((void));
++ void CancelRedo __ARGS((void));
+  void saveRedobuff __ARGS((void));
+  void restoreRedobuff __ARGS((void));
+  void AppendToRedobuff __ARGS((char_u *s));
+*** ../vim-7.3.428/src/version.c	2012-02-05 00:47:56.000000000 +0100
+--- src/version.c	2012-02-05 01:09:23.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     429,
+  /**/
+
+-- 
+The History of every major Galactic Civilization tends to pass through
+three distinct and recognizable phases, those of Survival, Inquiry and
+Sophistication, otherwise known as the How, Why and Where phases.
+For instance, the first phase is characterized by the question 'How can
+we eat?' the second by the question 'Why do we eat?' and the third by
+the question 'Where shall we have lunch?'
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.430 b/source/ap/vim/patches/7.3.430
new file mode 100644
index 00000000..c67e7fb0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.430
@@ -0,0 +1,80 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.430
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.430
+Problem:    When a custom filetype detection uses "augroup END" the conf
+            fileytpe detection does not have the filetypedetect group.
+Solution:   Always end the group and include filetypedetect in the conf
+            autocommand. (Lech Lorens)
+Files:      runtime/filetype.vim
+    
+
+*** ../vim-7.3.429/runtime/filetype.vim	2012-02-05 20:08:08.000000000 +0100
+--- runtime/filetype.vim	2012-02-05 19:59:40.000000000 +0100
+***************
+*** 2545,2561 ****
+  " detected filetypes.
+  runtime! ftdetect/*.vim
+  
+  
+  " Generic configuration file (check this last, it's just guessing!)
+! au BufNewFile,BufRead,StdinReadPost *
+  	\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
+  	\    && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#'
+  	\	|| getline(4) =~ '^#' || getline(5) =~ '^#') |
+  	\   setf conf |
+  	\ endif
+  
+- augroup END
+- 
+  
+  " If the GUI is already running, may still need to install the Syntax menu.
+  " Don't do it when the 'M' flag is included in 'guioptions'.
+--- 2545,2563 ----
+  " detected filetypes.
+  runtime! ftdetect/*.vim
+  
++ " NOTE: The above command could have ended the filetypedetect autocmd group
++ " and started another one. Let's make sure it has ended to get to a consistant
++ " state.
++ augroup END
+  
+  " Generic configuration file (check this last, it's just guessing!)
+! au filetypedetect BufNewFile,BufRead,StdinReadPost *
+  	\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
+  	\    && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#'
+  	\	|| getline(4) =~ '^#' || getline(5) =~ '^#') |
+  	\   setf conf |
+  	\ endif
+  
+  
+  " If the GUI is already running, may still need to install the Syntax menu.
+  " Don't do it when the 'M' flag is included in 'guioptions'.
+*** ../vim-7.3.429/src/version.c	2012-02-05 01:18:41.000000000 +0100
+--- src/version.c	2012-02-05 20:02:18.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     430,
+  /**/
+
+-- 
+The technology involved in making anything invisible is so infinitely
+complex that nine hundred and ninety-nine billion, nine hundred and
+ninety-nine million, nine hundred and ninety-nine thousand, nine hundred
+and ninety-nine times out of a trillion it is much simpler and more
+effective just to take the thing away and do without it.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.431 b/source/ap/vim/patches/7.3.431
new file mode 100644
index 00000000..2e4e62b3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.431
@@ -0,0 +1,280 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.431
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.431
+Problem:    Fetching a key at a prompt may be confused by escape sequences.
+            Especially when getting a prompt at a VimEnter autocommand.
+            (Alex Efros)
+Solution:   Properly handle escape sequences deleted by check_termcode().
+Files:      src/getchar.c, src/misc1.c, src/term.c, src/proto/term.pro
+
+
+*** ../vim-7.3.430/src/getchar.c	2012-02-05 01:18:41.000000000 +0100
+--- src/getchar.c	2012-02-05 22:04:33.000000000 +0100
+***************
+*** 2282,2288 ****
+  						   typebuf.tb_off] == RM_YES))
+  				&& !timedout)
+  			{
+! 			    keylen = check_termcode(max_mlen + 1, NULL, 0);
+  
+  			    /* If no termcode matched but 'pastetoggle'
+  			     * matched partially it's like an incomplete key
+--- 2282,2289 ----
+  						   typebuf.tb_off] == RM_YES))
+  				&& !timedout)
+  			{
+! 			    keylen = check_termcode(max_mlen + 1,
+! 							       NULL, 0, NULL);
+  
+  			    /* If no termcode matched but 'pastetoggle'
+  			     * matched partially it's like an incomplete key
+*** ../vim-7.3.430/src/misc1.c	2012-01-10 18:37:53.000000000 +0100
+--- src/misc1.c	2012-02-05 21:59:53.000000000 +0100
+***************
+*** 3105,3112 ****
+      int
+  get_keystroke()
+  {
+! #define CBUFLEN 151
+!     char_u	buf[CBUFLEN];
+      int		len = 0;
+      int		n;
+      int		save_mapped_ctrl_c = mapped_ctrl_c;
+--- 3105,3113 ----
+      int
+  get_keystroke()
+  {
+!     char_u	*buf = NULL;
+!     int		buflen = 150;
+!     int		maxlen;
+      int		len = 0;
+      int		n;
+      int		save_mapped_ctrl_c = mapped_ctrl_c;
+***************
+*** 3118,3129 ****
+  	cursor_on();
+  	out_flush();
+  
+  	/* First time: blocking wait.  Second time: wait up to 100ms for a
+! 	 * terminal code to complete.  Leave some room for check_termcode() to
+! 	 * insert a key code into (max 5 chars plus NUL).  And
+! 	 * fix_input_buffer() can triple the number of bytes. */
+! 	n = ui_inchar(buf + len, (CBUFLEN - 6 - len) / 3,
+! 						    len == 0 ? -1L : 100L, 0);
+  	if (n > 0)
+  	{
+  	    /* Replace zero and CSI by a special key code. */
+--- 3119,3147 ----
+  	cursor_on();
+  	out_flush();
+  
++ 	/* Leave some room for check_termcode() to insert a key code into (max
++ 	 * 5 chars plus NUL).  And fix_input_buffer() can triple the number of
++ 	 * bytes. */
++ 	maxlen = (buflen - 6 - len) / 3;
++ 	if (buf == NULL)
++ 	    buf = alloc(buflen);
++ 	else if (maxlen < 10)
++ 	{
++ 	    /* Need some more space. This migth happen when receiving a long
++ 	     * escape sequence. */
++ 	    buflen += 100;
++ 	    buf = vim_realloc(buf, buflen);
++ 	    maxlen = (buflen - 6 - len) / 3;
++ 	}
++ 	if (buf == NULL)
++ 	{
++ 	    do_outofmem_msg((long_u)buflen);
++ 	    return ESC;  /* panic! */
++ 	}
++ 
+  	/* First time: blocking wait.  Second time: wait up to 100ms for a
+! 	 * terminal code to complete. */
+! 	n = ui_inchar(buf + len, maxlen, len == 0 ? -1L : 100L, 0);
+  	if (n > 0)
+  	{
+  	    /* Replace zero and CSI by a special key code. */
+***************
+*** 3135,3141 ****
+  	    ++waited;	    /* keep track of the waiting time */
+  
+  	/* Incomplete termcode and not timed out yet: get more characters */
+! 	if ((n = check_termcode(1, buf, len)) < 0
+  	       && (!p_ttimeout || waited * 100L < (p_ttm < 0 ? p_tm : p_ttm)))
+  	    continue;
+  
+--- 3153,3159 ----
+  	    ++waited;	    /* keep track of the waiting time */
+  
+  	/* Incomplete termcode and not timed out yet: get more characters */
+! 	if ((n = check_termcode(1, buf, buflen, &len)) < 0
+  	       && (!p_ttimeout || waited * 100L < (p_ttm < 0 ? p_tm : p_ttm)))
+  	    continue;
+  
+***************
+*** 3203,3209 ****
+  	{
+  	    if (MB_BYTE2LEN(n) > len)
+  		continue;	/* more bytes to get */
+! 	    buf[len >= CBUFLEN ? CBUFLEN - 1 : len] = NUL;
+  	    n = (*mb_ptr2char)(buf);
+  	}
+  #endif
+--- 3221,3227 ----
+  	{
+  	    if (MB_BYTE2LEN(n) > len)
+  		continue;	/* more bytes to get */
+! 	    buf[len >= buflen ? buflen - 1 : len] = NUL;
+  	    n = (*mb_ptr2char)(buf);
+  	}
+  #endif
+***************
+*** 3213,3218 ****
+--- 3231,3237 ----
+  #endif
+  	break;
+      }
++     vim_free(buf);
+  
+      mapped_ctrl_c = save_mapped_ctrl_c;
+      return n;
+*** ../vim-7.3.430/src/term.c	2012-01-26 13:01:54.000000000 +0100
+--- src/term.c	2012-02-05 21:45:09.000000000 +0100
+***************
+*** 3785,3798 ****
+   * With a match, the match is removed, the replacement code is inserted in
+   * typebuf.tb_buf[] and the number of characters in typebuf.tb_buf[] is
+   * returned.
+!  * When "buf" is not NULL, it is used instead of typebuf.tb_buf[]. "buflen" is
+!  * then the length of the string in buf[].
+   */
+      int
+! check_termcode(max_offset, buf, buflen)
+      int		max_offset;
+      char_u	*buf;
+!     int		buflen;
+  {
+      char_u	*tp;
+      char_u	*p;
+--- 3785,3800 ----
+   * With a match, the match is removed, the replacement code is inserted in
+   * typebuf.tb_buf[] and the number of characters in typebuf.tb_buf[] is
+   * returned.
+!  * When "buf" is not NULL, buf[bufsize] is used instead of typebuf.tb_buf[].
+!  * "buflen" is then the length of the string in buf[] and is updated for
+!  * inserts and deletes.
+   */
+      int
+! check_termcode(max_offset, buf, bufsize, buflen)
+      int		max_offset;
+      char_u	*buf;
+!     int		bufsize;
+!     int		*buflen;
+  {
+      char_u	*tp;
+      char_u	*p;
+***************
+*** 3864,3873 ****
+  	}
+  	else
+  	{
+! 	    if (offset >= buflen)
+  		break;
+  	    tp = buf + offset;
+! 	    len = buflen - offset;
+  	}
+  
+  	/*
+--- 3866,3875 ----
+  	}
+  	else
+  	{
+! 	    if (offset >= *buflen)
+  		break;
+  	    tp = buf + offset;
+! 	    len = *buflen - offset;
+  	}
+  
+  	/*
+***************
+*** 5002,5013 ****
+  	    if (extra < 0)
+  		/* remove matched characters */
+  		mch_memmove(buf + offset, buf + offset - extra,
+! 					   (size_t)(buflen + offset + extra));
+  	    else if (extra > 0)
+! 		/* insert the extra space we need */
+  		mch_memmove(buf + offset + extra, buf + offset,
+! 						   (size_t)(buflen - offset));
+  	    mch_memmove(buf + offset, string, (size_t)new_slen);
+  	}
+  	return retval == 0 ? (len + extra + offset) : retval;
+      }
+--- 5004,5021 ----
+  	    if (extra < 0)
+  		/* remove matched characters */
+  		mch_memmove(buf + offset, buf + offset - extra,
+! 					   (size_t)(*buflen + offset + extra));
+  	    else if (extra > 0)
+! 	    {
+! 		/* Insert the extra space we need.  If there is insufficient
+! 		 * space return -1. */
+! 		if (*buflen + extra + new_slen >= bufsize)
+! 		    return -1;
+  		mch_memmove(buf + offset + extra, buf + offset,
+! 						   (size_t)(*buflen - offset));
+! 	    }
+  	    mch_memmove(buf + offset, string, (size_t)new_slen);
++ 	    *buflen = *buflen + extra + new_slen;
+  	}
+  	return retval == 0 ? (len + extra + offset) : retval;
+      }
+*** ../vim-7.3.430/src/proto/term.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/term.pro	2012-02-05 21:45:16.000000000 +0100
+***************
+*** 50,56 ****
+  char_u *get_termcode __ARGS((int i));
+  void del_termcode __ARGS((char_u *name));
+  void set_mouse_topline __ARGS((win_T *wp));
+! int check_termcode __ARGS((int max_offset, char_u *buf, int buflen));
+  char_u *replace_termcodes __ARGS((char_u *from, char_u **bufp, int from_part, int do_lt, int special));
+  int find_term_bykeys __ARGS((char_u *src));
+  void show_termcodes __ARGS((void));
+--- 50,56 ----
+  char_u *get_termcode __ARGS((int i));
+  void del_termcode __ARGS((char_u *name));
+  void set_mouse_topline __ARGS((win_T *wp));
+! int check_termcode __ARGS((int max_offset, char_u *buf, int bufsize, int *buflen));
+  char_u *replace_termcodes __ARGS((char_u *from, char_u **bufp, int from_part, int do_lt, int special));
+  int find_term_bykeys __ARGS((char_u *src));
+  void show_termcodes __ARGS((void));
+*** ../vim-7.3.430/src/version.c	2012-02-05 20:08:30.000000000 +0100
+--- src/version.c	2012-02-05 22:03:43.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     431,
+  /**/
+
+-- 
+"You know, it's at times like this when I'm trapped in a Vogon airlock with
+a man from Betelgeuse and about to die of asphyxiation in deep space that I
+really wish I'd listened to what my mother told me when I was young!"
+"Why, what did she tell you?"
+"I don't know, I didn't listen!"
+		-- Arthur Dent and Ford Prefect in Douglas Adams'
+		   "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.432 b/source/ap/vim/patches/7.3.432
new file mode 100644
index 00000000..c01dd59a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.432
@@ -0,0 +1,228 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.432
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.432
+Problem:    ACLs are not supported for ZFS or NFSv4 on Solaris.
+Solution:   Add configure check and code. (Danek Duvall)
+Files:      src/configure.in, src/auto/configure, src/config.h.in,
+            src/os_unix.c
+
+
+*** ../vim-7.3.431/src/configure.in	2011-12-14 20:51:19.000000000 +0100
+--- src/configure.in	2012-02-05 22:40:22.000000000 +0100
+***************
+*** 3106,3111 ****
+--- 3106,3112 ----
+  
+  dnl Link with -lposix1e for ACL stuff; if not found, try -lacl for SGI
+  dnl when -lacl works, also try to use -lattr (required for Debian).
++ dnl On Solaris, use the acl_get/set functions in libsec, if present.
+  AC_MSG_CHECKING(--disable-acl argument)
+  AC_ARG_ENABLE(acl,
+  	[  --disable-acl           Don't check for ACL support.],
+***************
+*** 3128,3133 ****
+--- 3129,3135 ----
+  	AC_MSG_RESULT(yes); AC_DEFINE(HAVE_POSIX_ACL),
+  	AC_MSG_RESULT(no))
+  
++ AC_CHECK_LIB(sec, acl_get, [LIBS="$LIBS -lsec"; AC_DEFINE(HAVE_SOLARIS_ZFS_ACL)],
+  AC_MSG_CHECKING(for Solaris ACL support)
+  AC_TRY_LINK([
+  #ifdef HAVE_SYS_ACL_H
+***************
+*** 3135,3141 ****
+  #endif], [acl("foo", GETACLCNT, 0, NULL);
+  	],
+  	AC_MSG_RESULT(yes); AC_DEFINE(HAVE_SOLARIS_ACL),
+! 	AC_MSG_RESULT(no))
+  
+  AC_MSG_CHECKING(for AIX ACL support)
+  AC_TRY_LINK([
+--- 3137,3143 ----
+  #endif], [acl("foo", GETACLCNT, 0, NULL);
+  	],
+  	AC_MSG_RESULT(yes); AC_DEFINE(HAVE_SOLARIS_ACL),
+! 	AC_MSG_RESULT(no)))
+  
+  AC_MSG_CHECKING(for AIX ACL support)
+  AC_TRY_LINK([
+*** ../vim-7.3.431/src/auto/configure	2011-12-14 20:51:19.000000000 +0100
+--- src/auto/configure	2012-02-05 22:41:01.000000000 +0100
+***************
+*** 11328,11334 ****
+  rm -f core conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+  
+! { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris ACL support" >&5
+  $as_echo_n "checking for Solaris ACL support... " >&6; }
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  /* end confdefs.h.  */
+--- 11328,11374 ----
+  rm -f core conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+  
+! { $as_echo "$as_me:${as_lineno-$LINENO}: checking for acl_get in -lsec" >&5
+! $as_echo_n "checking for acl_get in -lsec... " >&6; }
+! if test "${ac_cv_lib_sec_acl_get+set}" = set; then :
+!   $as_echo_n "(cached) " >&6
+! else
+!   ac_check_lib_save_LIBS=$LIBS
+! LIBS="-lsec  $LIBS"
+! cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+! /* end confdefs.h.  */
+! 
+! /* Override any GCC internal prototype to avoid an error.
+!    Use char because int might match the return type of a GCC
+!    builtin and then its argument prototype would still apply.  */
+! #ifdef __cplusplus
+! extern "C"
+! #endif
+! char acl_get ();
+! int
+! main ()
+! {
+! return acl_get ();
+!   ;
+!   return 0;
+! }
+! _ACEOF
+! if ac_fn_c_try_link "$LINENO"; then :
+!   ac_cv_lib_sec_acl_get=yes
+! else
+!   ac_cv_lib_sec_acl_get=no
+! fi
+! rm -f core conftest.err conftest.$ac_objext \
+!     conftest$ac_exeext conftest.$ac_ext
+! LIBS=$ac_check_lib_save_LIBS
+! fi
+! { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sec_acl_get" >&5
+! $as_echo "$ac_cv_lib_sec_acl_get" >&6; }
+! if test "x$ac_cv_lib_sec_acl_get" = x""yes; then :
+!   LIBS="$LIBS -lsec"; $as_echo "#define HAVE_SOLARIS_ZFS_ACL 1" >>confdefs.h
+! 
+! else
+!   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris ACL support" >&5
+  $as_echo_n "checking for Solaris ACL support... " >&6; }
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  /* end confdefs.h.  */
+***************
+*** 11355,11360 ****
+--- 11395,11402 ----
+  fi
+  rm -f core conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
++ fi
++ 
+  
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AIX ACL support" >&5
+  $as_echo_n "checking for AIX ACL support... " >&6; }
+*** ../vim-7.3.431/src/config.h.in	2011-09-02 12:27:20.000000000 +0200
+--- src/config.h.in	2012-02-05 22:40:22.000000000 +0100
+***************
+*** 363,368 ****
+--- 363,369 ----
+  
+  /* Define if you want to add support for ACL */
+  #undef HAVE_POSIX_ACL
++ #undef HAVE_SOLARIS_ZFS_ACL
+  #undef HAVE_SOLARIS_ACL
+  #undef HAVE_AIX_ACL
+  
+*** ../vim-7.3.431/src/os_unix.c	2012-01-10 22:26:12.000000000 +0100
+--- src/os_unix.c	2012-02-05 22:40:22.000000000 +0100
+***************
+*** 2746,2751 ****
+--- 2746,2758 ----
+  #ifdef HAVE_POSIX_ACL
+      ret = (vim_acl_T)acl_get_file((char *)fname, ACL_TYPE_ACCESS);
+  #else
++ #ifdef HAVE_SOLARIS_ZFS_ACL
++     acl_t *aclent;
++ 
++     if (acl_get((char *)fname, 0, &aclent) < 0)
++ 	return NULL;
++     ret = (vim_acl_T)aclent;
++ #else
+  #ifdef HAVE_SOLARIS_ACL
+      vim_acl_solaris_T   *aclent;
+  
+***************
+*** 2791,2796 ****
+--- 2798,2804 ----
+      ret = (vim_acl_T)aclent;
+  #endif /* HAVE_AIX_ACL */
+  #endif /* HAVE_SOLARIS_ACL */
++ #endif /* HAVE_SOLARIS_ZFS_ACL */
+  #endif /* HAVE_POSIX_ACL */
+      return ret;
+  }
+***************
+*** 2808,2813 ****
+--- 2816,2824 ----
+  #ifdef HAVE_POSIX_ACL
+      acl_set_file((char *)fname, ACL_TYPE_ACCESS, (acl_t)aclent);
+  #else
++ #ifdef HAVE_SOLARIS_ZFS_ACL
++     acl_set((char *)fname, (acl_t *)aclent);
++ #else
+  #ifdef HAVE_SOLARIS_ACL
+      acl((char *)fname, SETACL, ((vim_acl_solaris_T *)aclent)->acl_cnt,
+  	    ((vim_acl_solaris_T *)aclent)->acl_entry);
+***************
+*** 2816,2821 ****
+--- 2827,2833 ----
+      chacl((char *)fname, aclent, ((struct acl *)aclent)->acl_len);
+  #endif /* HAVE_AIX_ACL */
+  #endif /* HAVE_SOLARIS_ACL */
++ #endif /* HAVE_SOLARIS_ZFS_ACL */
+  #endif /* HAVE_POSIX_ACL */
+  }
+  
+***************
+*** 2828,2833 ****
+--- 2840,2848 ----
+  #ifdef HAVE_POSIX_ACL
+      acl_free((acl_t)aclent);
+  #else
++ #ifdef HAVE_SOLARIS_ZFS_ACL
++     acl_free((acl_t *)aclent);
++ #else
+  #ifdef HAVE_SOLARIS_ACL
+      free(((vim_acl_solaris_T *)aclent)->acl_entry);
+      free(aclent);
+***************
+*** 2836,2841 ****
+--- 2851,2857 ----
+      free(aclent);
+  #endif /* HAVE_AIX_ACL */
+  #endif /* HAVE_SOLARIS_ACL */
++ #endif /* HAVE_SOLARIS_ZFS_ACL */
+  #endif /* HAVE_POSIX_ACL */
+  }
+  #endif
+*** ../vim-7.3.431/src/version.c	2012-02-05 22:05:44.000000000 +0100
+--- src/version.c	2012-02-05 22:44:10.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     432,
+  /**/
+
+-- 
+If you put 7 of the most talented OSS developers in a room for a week
+and asked them to fix a bug in a spreadsheet program, in 1 week
+you'd have 2 new mail readers and a text-based web browser.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.433 b/source/ap/vim/patches/7.3.433
new file mode 100644
index 00000000..bb83828f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.433
@@ -0,0 +1,92 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.433
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.433
+Problem:    Using continued lines in a Vim script can be slow.
+Solution:   Instead of reallocating for every line use a growarray. (Yasuhiro
+            Matsumoto)
+Files:      src/ex_cmds2.c
+
+
+*** ../vim-7.3.432/src/ex_cmds2.c	2012-02-04 21:57:44.000000000 +0100
+--- src/ex_cmds2.c	2012-02-05 23:06:31.000000000 +0100
+***************
+*** 3439,3460 ****
+      {
+  	/* compensate for the one line read-ahead */
+  	--sourcing_lnum;
+! 	for (;;)
+  	{
+! 	    sp->nextline = get_one_sourceline(sp);
+! 	    if (sp->nextline == NULL)
+! 		break;
+! 	    p = skipwhite(sp->nextline);
+! 	    if (*p != '\\')
+! 		break;
+! 	    s = alloc((unsigned)(STRLEN(line) + STRLEN(p)));
+! 	    if (s == NULL)	/* out of memory */
+! 		break;
+! 	    STRCPY(s, line);
+! 	    STRCAT(s, p + 1);
+  	    vim_free(line);
+! 	    line = s;
+! 	    vim_free(sp->nextline);
+  	}
+      }
+  
+--- 3439,3470 ----
+      {
+  	/* compensate for the one line read-ahead */
+  	--sourcing_lnum;
+! 
+! 	/* Get the next line and concatenate it when it starts with a
+! 	 * backslash. We always need to read the next line, keep it in
+! 	 * sp->nextline. */
+! 	sp->nextline = get_one_sourceline(sp);
+! 	if (sp->nextline != NULL && *(p = skipwhite(sp->nextline)) == '\\')
+  	{
+! 	    garray_T    ga;
+! 
+! 	    ga_init2(&ga, (int)sizeof(char_u), 200);
+! 	    ga_concat(&ga, line);
+! 	    ga_concat(&ga, p + 1);
+! 	    for (;;)
+! 	    {
+! 		vim_free(sp->nextline);
+! 		sp->nextline = get_one_sourceline(sp);
+! 		if (sp->nextline == NULL)
+! 		    break;
+! 		p = skipwhite(sp->nextline);
+! 		if (*p != '\\')
+! 		    break;
+! 		ga_concat(&ga, p + 1);
+! 	    }
+! 	    ga_append(&ga, NUL);
+  	    vim_free(line);
+! 	    line = ga.ga_data;
+  	}
+      }
+  
+*** ../vim-7.3.432/src/version.c	2012-02-05 22:51:27.000000000 +0100
+--- src/version.c	2012-02-05 23:09:21.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     433,
+  /**/
+
+-- 
+Due knot trussed yore spell chequer two fined awl miss steaks.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.434 b/source/ap/vim/patches/7.3.434
new file mode 100644
index 00000000..52c14b90
--- /dev/null
+++ b/source/ap/vim/patches/7.3.434
@@ -0,0 +1,233 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.434
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.434
+Problem:    Using join() can be slow.
+Solution:   Compute the size of the result before allocation to avoid a lot of
+            allocations and copies. (Taro Muraoka)
+Files:      src/eval.c
+
+
+*** ../vim-7.3.433/src/eval.c	2012-02-05 00:39:14.000000000 +0100
+--- src/eval.c	2012-02-06 00:05:31.000000000 +0100
+***************
+*** 442,447 ****
+--- 442,448 ----
+  static list_T *list_copy __ARGS((list_T *orig, int deep, int copyID));
+  static void list_remove __ARGS((list_T *l, listitem_T *item, listitem_T *item2));
+  static char_u *list2string __ARGS((typval_T *tv, int copyID));
++ static int list_join_inner __ARGS((garray_T *gap, list_T *l, char_u *sep, int echo_style, int copyID, garray_T *join_gap));
+  static int list_join __ARGS((garray_T *gap, list_T *l, char_u *sep, int echo, int copyID));
+  static int free_unref_items __ARGS((int copyID));
+  static void set_ref_in_ht __ARGS((hashtab_T *ht, int copyID));
+***************
+*** 6571,6617 ****
+      return (char_u *)ga.ga_data;
+  }
+  
+! /*
+!  * Join list "l" into a string in "*gap", using separator "sep".
+!  * When "echo_style" is TRUE use String as echoed, otherwise as inside a List.
+!  * Return FAIL or OK.
+!  */
+      static int
+! list_join(gap, l, sep, echo_style, copyID)
+!     garray_T	*gap;
+      list_T	*l;
+      char_u	*sep;
+      int		echo_style;
+      int		copyID;
+  {
+      int		first = TRUE;
+      char_u	*tofree;
+      char_u	numbuf[NUMBUFLEN];
+      listitem_T	*item;
+      char_u	*s;
+  
+      for (item = l->lv_first; item != NULL && !got_int; item = item->li_next)
+      {
+- 	if (first)
+- 	    first = FALSE;
+- 	else
+- 	    ga_concat(gap, sep);
+- 
+  	if (echo_style)
+  	    s = echo_string(&item->li_tv, &tofree, numbuf, copyID);
+  	else
+  	    s = tv2string(&item->li_tv, &tofree, numbuf, copyID);
+- 	if (s != NULL)
+- 	    ga_concat(gap, s);
+- 	vim_free(tofree);
+  	if (s == NULL)
+  	    return FAIL;
+  	line_breakcheck();
+      }
+      return OK;
+  }
+  
+  /*
+   * Garbage collection for lists and dictionaries.
+   *
+   * We use reference counts to be able to free most items right away when they
+--- 6572,6690 ----
+      return (char_u *)ga.ga_data;
+  }
+  
+! typedef struct join_S {
+!     char_u	*s;
+!     char_u	*tofree;
+! } join_T;
+! 
+      static int
+! list_join_inner(gap, l, sep, echo_style, copyID, join_gap)
+!     garray_T	*gap;		/* to store the result in */
+      list_T	*l;
+      char_u	*sep;
+      int		echo_style;
+      int		copyID;
++     garray_T	*join_gap;	/* to keep each list item string */
+  {
++     int		i;
++     join_T	*p;
++     int		len;
++     int		sumlen = 0;
+      int		first = TRUE;
+      char_u	*tofree;
+      char_u	numbuf[NUMBUFLEN];
+      listitem_T	*item;
+      char_u	*s;
+  
++     /* Stringify each item in the list. */
+      for (item = l->lv_first; item != NULL && !got_int; item = item->li_next)
+      {
+  	if (echo_style)
+  	    s = echo_string(&item->li_tv, &tofree, numbuf, copyID);
+  	else
+  	    s = tv2string(&item->li_tv, &tofree, numbuf, copyID);
+  	if (s == NULL)
+  	    return FAIL;
++ 
++ 	len = (int)STRLEN(s);
++ 	sumlen += len;
++ 
++ 	ga_grow(join_gap, 1);
++ 	p = ((join_T *)join_gap->ga_data) + (join_gap->ga_len++);
++ 	if (tofree != NULL || s != numbuf)
++ 	{
++ 	    p->s = s;
++ 	    p->tofree = tofree;
++ 	}
++ 	else
++ 	{
++ 	    p->s = vim_strnsave(s, len);
++ 	    p->tofree = p->s;
++ 	}
++ 
++ 	line_breakcheck();
++     }
++ 
++     /* Allocate result buffer with its total size, avoid re-allocation and
++      * multiple copy operations.  Add 2 for a tailing ']' and NUL. */
++     if (join_gap->ga_len >= 2)
++ 	sumlen += (int)STRLEN(sep) * (join_gap->ga_len - 1);
++     if (ga_grow(gap, sumlen + 2) == FAIL)
++ 	return FAIL;
++ 
++     for (i = 0; i < join_gap->ga_len && !got_int; ++i)
++     {
++ 	if (first)
++ 	    first = FALSE;
++ 	else
++ 	    ga_concat(gap, sep);
++ 	p = ((join_T *)join_gap->ga_data) + i;
++ 
++ 	if (p->s != NULL)
++ 	    ga_concat(gap, p->s);
+  	line_breakcheck();
+      }
++ 
+      return OK;
+  }
+  
+  /*
++  * Join list "l" into a string in "*gap", using separator "sep".
++  * When "echo_style" is TRUE use String as echoed, otherwise as inside a List.
++  * Return FAIL or OK.
++  */
++     static int
++ list_join(gap, l, sep, echo_style, copyID)
++     garray_T	*gap;
++     list_T	*l;
++     char_u	*sep;
++     int		echo_style;
++     int		copyID;
++ {
++     garray_T	join_ga;
++     int		retval;
++     join_T	*p;
++     int		i;
++ 
++     ga_init2(&join_ga, (int)sizeof(join_T), l->lv_len);
++     retval = list_join_inner(gap, l, sep, echo_style, copyID, &join_ga);
++ 
++     /* Dispose each item in join_ga. */
++     if (join_ga.ga_data != NULL)
++     {
++ 	p = (join_T *)join_ga.ga_data;
++ 	for (i = 0; i < join_ga.ga_len; ++i)
++ 	{
++ 	    vim_free(p->tofree);
++ 	    ++p;
++ 	}
++ 	ga_clear(&join_ga);
++     }
++ 
++     return retval;
++ }
++ 
++ /*
+   * Garbage collection for lists and dictionaries.
+   *
+   * We use reference counts to be able to free most items right away when they
+***************
+*** 13406,13412 ****
+      char_u	*rhs;
+      int		mode;
+      int		abbr = FALSE;
+!     int         get_dict = FALSE;
+      mapblock_T	*mp;
+      int		buffer_local;
+  
+--- 13479,13485 ----
+      char_u	*rhs;
+      int		mode;
+      int		abbr = FALSE;
+!     int		get_dict = FALSE;
+      mapblock_T	*mp;
+      int		buffer_local;
+  
+*** ../vim-7.3.433/src/version.c	2012-02-05 23:10:25.000000000 +0100
+--- src/version.c	2012-02-06 00:10:23.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     434,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+30. Even though you died last week, you've managed to retain OPS on your
+    favorite IRC channel.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.435 b/source/ap/vim/patches/7.3.435
new file mode 100644
index 00000000..e1b13709
--- /dev/null
+++ b/source/ap/vim/patches/7.3.435
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.435
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.435
+Problem:    Compiler warning for unused variable.
+Solution:   Move the variable inside #ifdef.
+Files:      src/ex_cmds2.c
+
+
+*** ../vim-7.3.434/src/ex_cmds2.c	2012-02-05 23:10:25.000000000 +0100
+--- src/ex_cmds2.c	2012-02-06 06:16:28.000000000 +0100
+***************
+*** 3400,3406 ****
+  {
+      struct source_cookie *sp = (struct source_cookie *)cookie;
+      char_u		*line;
+!     char_u		*p, *s;
+  
+  #ifdef FEAT_EVAL
+      /* If breakpoints have been added/deleted need to check for it. */
+--- 3400,3406 ----
+  {
+      struct source_cookie *sp = (struct source_cookie *)cookie;
+      char_u		*line;
+!     char_u		*p;
+  
+  #ifdef FEAT_EVAL
+      /* If breakpoints have been added/deleted need to check for it. */
+***************
+*** 3471,3476 ****
+--- 3471,3478 ----
+  #ifdef FEAT_MBYTE
+      if (line != NULL && sp->conv.vc_type != CONV_NONE)
+      {
++ 	char_u	*s;
++ 
+  	/* Convert the encoding of the script line. */
+  	s = string_convert(&sp->conv, line, NULL);
+  	if (s != NULL)
+*** ../vim-7.3.434/src/version.c	2012-02-06 00:13:16.000000000 +0100
+--- src/version.c	2012-02-11 20:38:49.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     435,
+  /**/
+
+-- 
+Light travels faster than sound.  This is why some people
+appear bright until you hear them speak
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.436 b/source/ap/vim/patches/7.3.436
new file mode 100644
index 00000000..777371ca
--- /dev/null
+++ b/source/ap/vim/patches/7.3.436
@@ -0,0 +1,111 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.436
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.436
+Problem:    Compiler warnings for types on Windows.
+Solution:   Add type casts. (Mike Williams)
+Files:      src/eval.c
+
+
+*** ../vim-7.3.435/src/eval.c	2012-02-06 00:13:16.000000000 +0100
+--- src/eval.c	2012-02-11 20:38:16.000000000 +0100
+***************
+*** 14462,14468 ****
+  			    --prevlen;
+  		}
+  		if (prevlen == 0)
+! 		    s = vim_strnsave(start, len);
+  		else
+  		{
+  		    /* Change "prev" buffer to be the right size.  This way
+--- 14462,14468 ----
+  			    --prevlen;
+  		}
+  		if (prevlen == 0)
+! 		    s = vim_strnsave(start, (int)len);
+  		else
+  		{
+  		    /* Change "prev" buffer to be the right size.  This way
+***************
+*** 14529,14535 ****
+  
+  			if (dest < buf)
+  			{
+! 			    adjust_prevlen = buf - dest; /* must be 1 or 2 */
+  			    dest = buf;
+  			}
+  			if (readlen > p - buf + 1)
+--- 14529,14535 ----
+  
+  			if (dest < buf)
+  			{
+! 			    adjust_prevlen = (int)(buf - dest); /* must be 1 or 2 */
+  			    dest = buf;
+  			}
+  			if (readlen > p - buf + 1)
+***************
+*** 14558,14568 ****
+  		 * small, to avoid repeatedly 'allocing' large and
+  		 * 'reallocing' small. */
+  		if (prevsize == 0)
+! 		    prevsize = p - start;
+  		else
+  		{
+  		    long grow50pc = (prevsize * 3) / 2;
+! 		    long growmin  = (p - start) * 2 + prevlen;
+  		    prevsize = grow50pc > growmin ? grow50pc : growmin;
+  		}
+  		if ((newprev = vim_realloc(prev, prevsize)) == NULL)
+--- 14558,14568 ----
+  		 * small, to avoid repeatedly 'allocing' large and
+  		 * 'reallocing' small. */
+  		if (prevsize == 0)
+! 		    prevsize = (long)(p - start);
+  		else
+  		{
+  		    long grow50pc = (prevsize * 3) / 2;
+! 		    long growmin  = (long)((p - start) * 2 + prevlen);
+  		    prevsize = grow50pc > growmin ? grow50pc : growmin;
+  		}
+  		if ((newprev = vim_realloc(prev, prevsize)) == NULL)
+***************
+*** 14575,14581 ****
+  	    }
+  	    /* Add the line part to end of "prev". */
+  	    mch_memmove(prev + prevlen, start, p - start);
+! 	    prevlen += p - start;
+  	}
+      } /* while */
+  
+--- 14575,14581 ----
+  	    }
+  	    /* Add the line part to end of "prev". */
+  	    mch_memmove(prev + prevlen, start, p - start);
+! 	    prevlen += (long)(p - start);
+  	}
+      } /* while */
+  
+*** ../vim-7.3.435/src/version.c	2012-02-11 20:40:49.000000000 +0100
+--- src/version.c	2012-02-11 20:43:18.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     436,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+39. You move into a new house and decide to Netscape before you landscape.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.437 b/source/ap/vim/patches/7.3.437
new file mode 100644
index 00000000..889efe74
--- /dev/null
+++ b/source/ap/vim/patches/7.3.437
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.437
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.437
+Problem:    Continue looping inside FOR_ALL_TAB_WINDOWS even when already done.
+Solution:   Use goto instead of break. (Hirohito Higashi)
+Files:      src/fileio.c, src/globals.h
+
+
+*** ../vim-7.3.436/src/fileio.c	2011-09-02 11:56:15.000000000 +0200
+--- src/fileio.c	2012-02-11 23:40:23.000000000 +0100
+***************
+*** 8898,8907 ****
+  		    if (tp != curtab)
+  			goto_tabpage_tp(tp);
+  		    win_goto(aucmd_win);
+! 		    break;
+  		}
+  	    }
+  	}
+  
+  	/* Remove the window and frame from the tree of frames. */
+  	(void)winframe_remove(curwin, &dummy, NULL);
+--- 8898,8908 ----
+  		    if (tp != curtab)
+  			goto_tabpage_tp(tp);
+  		    win_goto(aucmd_win);
+! 		    goto win_found;
+  		}
+  	    }
+  	}
++ win_found:
+  
+  	/* Remove the window and frame from the tree of frames. */
+  	(void)winframe_remove(curwin, &dummy, NULL);
+*** ../vim-7.3.436/src/globals.h	2012-02-04 23:34:57.000000000 +0100
+--- src/globals.h	2012-02-11 23:43:45.000000000 +0100
+***************
+*** 535,540 ****
+--- 535,544 ----
+  EXTERN win_T	*prevwin INIT(= NULL);	/* previous window */
+  # define W_NEXT(wp) ((wp)->w_next)
+  # define FOR_ALL_WINDOWS(wp) for (wp = firstwin; wp != NULL; wp = wp->w_next)
++ /*
++  * When using this macro "break" only breaks out of the inner loop. Use "goto"
++  * to break out of the tabpage loop.
++  */
+  # define FOR_ALL_TAB_WINDOWS(tp, wp) \
+      for ((tp) = first_tabpage; (tp) != NULL; (tp) = (tp)->tp_next) \
+  	for ((wp) = ((tp) == curtab) \
+*** ../vim-7.3.436/src/version.c	2012-02-11 20:44:01.000000000 +0100
+--- src/version.c	2012-02-11 23:40:47.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     437,
+  /**/
+
+-- 
+The future isn't what it used to be.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.438 b/source/ap/vim/patches/7.3.438
new file mode 100644
index 00000000..94786d7c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.438
@@ -0,0 +1,126 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.438
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.438
+Problem:    There is no way to avoid ":doautoall" reading modelines.
+Solution:   Add the <nomodeline> argument. Adjust documentation.
+Files:	    src/fileio.c, runtime/doc/autocmd.txt
+
+
+*** ../vim-7.3.437/src/fileio.c	2012-02-11 23:45:30.000000000 +0100
+--- src/fileio.c	2012-02-12 00:08:17.000000000 +0100
+***************
+*** 8739,8744 ****
+--- 8739,8752 ----
+      int		retval;
+      aco_save_T	aco;
+      buf_T	*buf;
++     char_u	*arg = eap->arg;
++     int		call_do_modelines = TRUE;
++ 
++     if (STRNCMP(arg, "<nomodeline>", 12) == 0)
++     {
++ 	call_do_modelines = FALSE;
++ 	arg = skipwhite(arg + 12);
++     }
+  
+      /*
+       * This is a bit tricky: For some commands curwin->w_buffer needs to be
+***************
+*** 8755,8765 ****
+  	    aucmd_prepbuf(&aco, buf);
+  
+  	    /* execute the autocommands for this buffer */
+! 	    retval = do_doautocmd(eap->arg, FALSE);
+  
+! 	    /* Execute the modeline settings, but don't set window-local
+! 	     * options if we are using the current window for another buffer. */
+! 	    do_modelines(curwin == aucmd_win ? OPT_NOWIN : 0);
+  
+  	    /* restore the current window */
+  	    aucmd_restbuf(&aco);
+--- 8763,8777 ----
+  	    aucmd_prepbuf(&aco, buf);
+  
+  	    /* execute the autocommands for this buffer */
+! 	    retval = do_doautocmd(arg, FALSE);
+  
+! 	    if (call_do_modelines)
+! 	    {
+! 		/* Execute the modeline settings, but don't set window-local
+! 		 * options if we are using the current window for another
+! 		 * buffer. */
+! 		do_modelines(curwin == aucmd_win ? OPT_NOWIN : 0);
+! 	    }
+  
+  	    /* restore the current window */
+  	    aucmd_restbuf(&aco);
+*** ../vim-7.3.437/runtime/doc/autocmd.txt	2011-05-19 17:25:36.000000000 +0200
+--- runtime/doc/autocmd.txt	2012-02-12 00:03:45.000000000 +0100
+***************
+*** 1065,1077 ****
+  			autocommands for that group.  Note: if you use an
+  			undefined group name, Vim gives you an error message.
+  
+- 			After applying the autocommands the modelines are
+- 			processed, so that their settings overrule the
+- 			settings from autocommands, like what happens when
+- 			editing a file.
+- 
+  						*:doautoa* *:doautoall*
+! :doautoa[ll] [group] {event} [fname]
+  			Like ":doautocmd", but apply the autocommands to each
+  			loaded buffer.  Note that [fname] is used to select
+  			the autocommands, not the buffers to which they are
+--- 1073,1080 ----
+  			autocommands for that group.  Note: if you use an
+  			undefined group name, Vim gives you an error message.
+  
+  						*:doautoa* *:doautoall*
+! :doautoa[ll] [<nomodeline>] [group] {event} [fname]
+  			Like ":doautocmd", but apply the autocommands to each
+  			loaded buffer.  Note that [fname] is used to select
+  			the autocommands, not the buffers to which they are
+***************
+*** 1082,1087 ****
+--- 1085,1096 ----
+  			This command is intended for autocommands that set
+  			options, change highlighting, and things like that.
+  
++ 			After applying the autocommands the modelines are
++ 			processed, so that their settings overrule the
++ 			settings from autocommands, like what happens when
++ 			editing a file. This is skipped when the <nomodeline>
++ 			argument is present.
++ 
+  ==============================================================================
+  10. Using autocommands					*autocmd-use*
+  
+*** ../vim-7.3.437/src/version.c	2012-02-11 23:45:30.000000000 +0100
+--- src/version.c	2012-02-12 00:16:04.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     438,
+  /**/
+
+-- 
+"Oh, no!  NOT the Spanish Inquisition!"
+"NOBODY expects the Spanish Inquisition!!!"
+				-- Monty Python sketch --
+"Oh, no!  NOT another option!"
+"EVERYBODY expects another option!!!"
+				-- Discussion in vim-dev mailing list --
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.439 b/source/ap/vim/patches/7.3.439
new file mode 100644
index 00000000..63d8f693
--- /dev/null
+++ b/source/ap/vim/patches/7.3.439
@@ -0,0 +1,87 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.439
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.439
+Problem:    Compiler warnings to size casts in Perl interface.
+Solution:   Use XS macros. (James McCoy)
+Files:      src/if_perl.xs, src/typemap
+
+
+*** ../vim-7.3.438/src/if_perl.xs	2011-09-07 18:47:19.000000000 +0200
+--- src/if_perl.xs	2012-02-12 00:28:52.000000000 +0100
+***************
+*** 611,617 ****
+      if (ptr->w_perl_private == NULL)
+      {
+  	ptr->w_perl_private = newSV(0);
+! 	sv_setiv(ptr->w_perl_private, (IV)ptr);
+      }
+      else
+  	SvREFCNT_inc(ptr->w_perl_private);
+--- 611,617 ----
+      if (ptr->w_perl_private == NULL)
+      {
+  	ptr->w_perl_private = newSV(0);
+! 	sv_setiv(ptr->w_perl_private, PTR2IV(ptr));
+      }
+      else
+  	SvREFCNT_inc(ptr->w_perl_private);
+***************
+*** 629,635 ****
+      if (ptr->b_perl_private == NULL)
+      {
+  	ptr->b_perl_private = newSV(0);
+! 	sv_setiv(ptr->b_perl_private, (IV)ptr);
+      }
+      else
+  	SvREFCNT_inc(ptr->b_perl_private);
+--- 629,635 ----
+      if (ptr->b_perl_private == NULL)
+      {
+  	ptr->b_perl_private = newSV(0);
+! 	sv_setiv(ptr->b_perl_private, PTR2IV(ptr));
+      }
+      else
+  	SvREFCNT_inc(ptr->b_perl_private);
+*** ../vim-7.3.438/src/typemap	2010-08-15 21:57:29.000000000 +0200
+--- src/typemap	2012-02-12 00:28:52.000000000 +0100
+***************
+*** 6,12 ****
+  T_VIOBJNOMUNGE
+  	if (sv_isa($arg, \"${ntype}\")) {
+  	    IV tmp = SvIV((SV*)SvRV($arg));
+! 	    $var = ($type) tmp;
+  	    if (!tmp)
+  		croak(\"$ntype no longer exists\");
+  	}
+--- 6,12 ----
+  T_VIOBJNOMUNGE
+  	if (sv_isa($arg, \"${ntype}\")) {
+  	    IV tmp = SvIV((SV*)SvRV($arg));
+! 	    $var = INT2PTR($type, tmp);
+  	    if (!tmp)
+  		croak(\"$ntype no longer exists\");
+  	}
+*** ../vim-7.3.438/src/version.c	2012-02-12 00:18:54.000000000 +0100
+--- src/version.c	2012-02-12 00:31:18.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     439,
+  /**/
+
+-- 
+Microsoft is to software what McDonalds is to gourmet cooking
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.440 b/source/ap/vim/patches/7.3.440
new file mode 100644
index 00000000..39313b0f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.440
@@ -0,0 +1,211 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.440
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.440
+Problem:    Vim does not support UTF8_STRING for the X selection.
+Solution:   Add UTF8_STRING atom support. (Alex Efros) Use it only when
+            'encoding' is set to Unicode.
+Files:      src/ui.c
+
+
+*** ../vim-7.3.439/src/ui.c	2012-02-04 21:57:44.000000000 +0100
+--- src/ui.c	2012-02-12 01:28:30.000000000 +0100
+***************
+*** 1917,1922 ****
+--- 1917,1923 ----
+  static Atom	vim_atom;	/* Vim's own special selection format */
+  #ifdef FEAT_MBYTE
+  static Atom	vimenc_atom;	/* Vim's extended selection format */
++ static Atom	utf8_atom;
+  #endif
+  static Atom	compound_text_atom;
+  static Atom	text_atom;
+***************
+*** 1930,1935 ****
+--- 1931,1937 ----
+      vim_atom	       = XInternAtom(dpy, VIM_ATOM_NAME,   False);
+  #ifdef FEAT_MBYTE
+      vimenc_atom	       = XInternAtom(dpy, VIMENC_ATOM_NAME,False);
++     utf8_atom	       = XInternAtom(dpy, "UTF8_STRING",   False);
+  #endif
+      compound_text_atom = XInternAtom(dpy, "COMPOUND_TEXT", False);
+      text_atom	       = XInternAtom(dpy, "TEXT",	   False);
+***************
+*** 2074,2080 ****
+      }
+  #endif
+  
+!     else if (*type == compound_text_atom || (
+  #ifdef FEAT_MBYTE
+  		enc_dbcs != 0 &&
+  #endif
+--- 2076,2086 ----
+      }
+  #endif
+  
+!     else if (*type == compound_text_atom
+! #ifdef FEAT_MBYTE
+! 	    || *type == utf8_atom
+! #endif
+! 	    || (
+  #ifdef FEAT_MBYTE
+  		enc_dbcs != 0 &&
+  #endif
+***************
+*** 2128,2134 ****
+  #else
+  	    1
+  #endif
+! 	    ; i < 5; i++)
+      {
+  	switch (i)
+  	{
+--- 2134,2140 ----
+  #else
+  	    1
+  #endif
+! 	    ; i < 6; i++)
+      {
+  	switch (i)
+  	{
+***************
+*** 2136,2145 ****
+  	    case 0:  type = vimenc_atom;	break;
+  #endif
+  	    case 1:  type = vim_atom;		break;
+! 	    case 2:  type = compound_text_atom; break;
+! 	    case 3:  type = text_atom;		break;
+  	    default: type = XA_STRING;
+  	}
+  	success = MAYBE;
+  	XtGetSelectionValue(myShell, cbd->sel_atom, type,
+  	    clip_x11_request_selection_cb, (XtPointer)&success, CurrentTime);
+--- 2142,2159 ----
+  	    case 0:  type = vimenc_atom;	break;
+  #endif
+  	    case 1:  type = vim_atom;		break;
+! #ifdef FEAT_MBYTE
+! 	    case 2:  type = utf8_atom;		break;
+! #endif
+! 	    case 3:  type = compound_text_atom; break;
+! 	    case 4:  type = text_atom;		break;
+  	    default: type = XA_STRING;
+  	}
++ #ifdef FEAT_MBYTE
++ 	if (type == utf8_atom && !enc_utf8)
++ 	    /* Only request utf-8 when 'encoding' is utf8. */
++ 	    continue;
++ #endif
+  	success = MAYBE;
+  	XtGetSelectionValue(myShell, cbd->sel_atom, type,
+  	    clip_x11_request_selection_cb, (XtPointer)&success, CurrentTime);
+***************
+*** 2230,2247 ****
+      {
+  	Atom *array;
+  
+! 	if ((array = (Atom *)XtMalloc((unsigned)(sizeof(Atom) * 6))) == NULL)
+  	    return False;
+  	*value = (XtPointer)array;
+  	i = 0;
+- 	array[i++] = XA_STRING;
+  	array[i++] = targets_atom;
+  #ifdef FEAT_MBYTE
+  	array[i++] = vimenc_atom;
+  #endif
+  	array[i++] = vim_atom;
+  	array[i++] = text_atom;
+  	array[i++] = compound_text_atom;
+  	*type = XA_ATOM;
+  	/* This used to be: *format = sizeof(Atom) * 8; but that caused
+  	 * crashes on 64 bit machines. (Peter Derr) */
+--- 2244,2266 ----
+      {
+  	Atom *array;
+  
+! 	if ((array = (Atom *)XtMalloc((unsigned)(sizeof(Atom) * 7))) == NULL)
+  	    return False;
+  	*value = (XtPointer)array;
+  	i = 0;
+  	array[i++] = targets_atom;
+  #ifdef FEAT_MBYTE
+  	array[i++] = vimenc_atom;
+  #endif
+  	array[i++] = vim_atom;
++ #ifdef FEAT_MBYTE
++ 	if (enc_utf8)
++ 	    array[i++] = utf8_atom;
++ #endif
++ 	array[i++] = XA_STRING;
+  	array[i++] = text_atom;
+  	array[i++] = compound_text_atom;
++ 
+  	*type = XA_ATOM;
+  	/* This used to be: *format = sizeof(Atom) * 8; but that caused
+  	 * crashes on 64 bit machines. (Peter Derr) */
+***************
+*** 2253,2258 ****
+--- 2272,2278 ----
+      if (       *target != XA_STRING
+  #ifdef FEAT_MBYTE
+  	    && *target != vimenc_atom
++ 	    && *target != utf8_atom
+  #endif
+  	    && *target != vim_atom
+  	    && *target != text_atom
+***************
+*** 2282,2294 ****
+  	return False;
+      }
+  
+!     if (*target == XA_STRING)
+      {
+  	mch_memmove(result, string, (size_t)(*length));
+! 	*type = XA_STRING;
+      }
+!     else if (*target == compound_text_atom
+! 	    || *target == text_atom)
+      {
+  	XTextProperty	text_prop;
+  	char		*string_nt = (char *)alloc((unsigned)*length + 1);
+--- 2302,2317 ----
+  	return False;
+      }
+  
+!     if (*target == XA_STRING
+! #ifdef FEAT_MBYTE
+! 	    || (*target == utf8_atom && enc_utf8)
+! #endif
+! 	    )
+      {
+  	mch_memmove(result, string, (size_t)(*length));
+! 	*type = *target;
+      }
+!     else if (*target == compound_text_atom || *target == text_atom)
+      {
+  	XTextProperty	text_prop;
+  	char		*string_nt = (char *)alloc((unsigned)*length + 1);
+*** ../vim-7.3.439/src/version.c	2012-02-12 00:31:47.000000000 +0100
+--- src/version.c	2012-02-12 01:34:22.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     440,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+42. Your virtual girlfriend finds a new net sweetheart with a larger bandwidth.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.441 b/source/ap/vim/patches/7.3.441
new file mode 100644
index 00000000..9a7539b5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.441
@@ -0,0 +1,341 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.441
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.441
+Problem:    Newer versions of MzScheme (Racket) require earlier (trampolined)
+            initialisation.
+Solution:   Call mzscheme_main() early in main(). (Sergey Khorev)
+Files:      src/Make_mvc.mak, src/if_mzsch.c, src/main.c,
+            src/proto/if_mzsch.pro
+    
+
+*** ../vim-7.3.440/src/Make_mvc.mak	2011-09-14 19:01:38.000000000 +0200
+--- src/Make_mvc.mak	2012-02-12 01:46:05.000000000 +0100
+***************
+*** 740,745 ****
+--- 740,747 ----
+  !endif
+  !endif
+  MZSCHEME_OBJ = $(OUTDIR)\if_mzsch.obj
++ # increase stack size
++ MZSCHEME_LIB = $(MZSCHEME_LIB) /STACK:8388608
+  !endif
+  
+  # Perl interface
+*** ../vim-7.3.440/src/if_mzsch.c	2010-11-03 21:59:23.000000000 +0100
+--- src/if_mzsch.c	2012-02-12 01:47:31.000000000 +0100
+***************
+*** 31,38 ****
+   * depend". */
+  #if defined(FEAT_MZSCHEME) || defined(PROTO)
+  
+- #include <assert.h>
+- 
+  /* Base data structures */
+  #define SCHEME_VIMBUFFERP(obj)  SAME_TYPE(SCHEME_TYPE(obj), mz_buffer_type)
+  #define SCHEME_VIMWINDOWP(obj)  SAME_TYPE(SCHEME_TYPE(obj), mz_window_type)
+--- 31,36 ----
+***************
+*** 559,575 ****
+      hMzSch = vimLoadLib(sch_dll);
+      hMzGC = vimLoadLib(gc_dll);
+  
+!     if (!hMzSch)
+      {
+  	if (verbose)
+! 	    EMSG2(_(e_loadlib), sch_dll);
+  	return FAIL;
+      }
+  
+!     if (!hMzGC)
+      {
+  	if (verbose)
+! 	    EMSG2(_(e_loadlib), gc_dll);
+  	return FAIL;
+      }
+  
+--- 557,573 ----
+      hMzSch = vimLoadLib(sch_dll);
+      hMzGC = vimLoadLib(gc_dll);
+  
+!     if (!hMzGC)
+      {
+  	if (verbose)
+! 	    EMSG2(_(e_loadlib), gc_dll);
+  	return FAIL;
+      }
+  
+!     if (!hMzSch)
+      {
+  	if (verbose)
+! 	    EMSG2(_(e_loadlib), sch_dll);
+  	return FAIL;
+      }
+  
+***************
+*** 798,862 ****
+  static __declspec(thread) void *tls_space;
+  #endif
+  
+!     void
+! mzscheme_main(void)
+  {
+  #if MZSCHEME_VERSION_MAJOR >= 500 && defined(WIN32) && defined(USE_THREAD_LOCAL)
+      scheme_register_tls_space(&tls_space, 0);
+  #endif
+! #if defined(MZ_PRECISE_GC) && MZSCHEME_VERSION_MAJOR >= 400
+!     /* use trampoline for precise GC in MzScheme >= 4.x */
+!     scheme_main_setup(TRUE, mzscheme_env_main, 0, NULL);
+  #else
+!     mzscheme_env_main(NULL, 0, NULL);
+  #endif
+  }
+  
+      static int
+! mzscheme_env_main(Scheme_Env *env, int argc UNUSED, char **argv UNUSED)
+  {
+!     /* neither argument nor return values are used */
+! #ifdef MZ_PRECISE_GC
+! # if MZSCHEME_VERSION_MAJOR < 400
+!     /*
+!      * Starting from version 4.x, embedding applications must use
+!      * scheme_main_setup/scheme_main_stack_setup trampolines
+!      * rather than setting stack base directly with scheme_set_stack_base
+!      */
+      Scheme_Object   *dummy = NULL;
+      MZ_GC_DECL_REG(1);
+      MZ_GC_VAR_IN_REG(0, dummy);
+  
+      stack_base = &__gc_var_stack__;
+  # else
+-     /* environment has been created by us by Scheme */
+-     environment = env;
+- # endif
+-     /*
+-      * In 4.x, all activities must be performed inside trampoline
+-      * so we are forced to initialise GC immediately
+-      * This can be postponed in 3.x but I see no point in implementing
+-      * a feature which will work in older versions only.
+-      * One would better use conservative GC if he needs dynamic MzScheme
+-      */
+-     mzscheme_init();
+- #else
+      int dummy = 0;
+      stack_base = (void *)&dummy;
+  #endif
+!     main_loop(FALSE, FALSE);
+! #if defined(MZ_PRECISE_GC) && MZSCHEME_VERSION_MAJOR < 400
+      /* releasing dummy */
+      MZ_GC_REG();
+      MZ_GC_UNREG();
+  #endif
+!     return 0;
+  }
+  
+      static void
+  startup_mzscheme(void)
+  {
+! #if !defined(MZ_PRECISE_GC) || MZSCHEME_VERSION_MAJOR < 400
+      scheme_set_stack_base(stack_base, 1);
+  #endif
+  
+--- 796,863 ----
+  static __declspec(thread) void *tls_space;
+  #endif
+  
+! /*
+!  * Since version 4.x precise GC requires trampolined startup.
+!  * Futures and places in version 5.x need it too.
+!  */
+! #if defined(MZ_PRECISE_GC) && MZSCHEME_VERSION_MAJOR >= 400 \
+!     || MZSCHEME_VERSION_MAJOR >= 500 && (defined(MZ_USE_FUTURES) || defined(MZ_USE_PLACES))
+! # ifdef DYNAMIC_MZSCHEME
+! #  error Precise GC v.4+ or Racket with futures/places do not support dynamic MzScheme
+! # endif
+! # define TRAMPOLINED_MZVIM_STARTUP
+! #endif
+! 
+!     int
+! mzscheme_main(int argc, char** argv)
+  {
+  #if MZSCHEME_VERSION_MAJOR >= 500 && defined(WIN32) && defined(USE_THREAD_LOCAL)
+      scheme_register_tls_space(&tls_space, 0);
+  #endif
+! #ifdef TRAMPOLINED_MZVIM_STARTUP
+!     return scheme_main_setup(TRUE, mzscheme_env_main, argc, argv);
+  #else
+!     return mzscheme_env_main(NULL, argc, argv);
+  #endif
+  }
+  
+      static int
+! mzscheme_env_main(Scheme_Env *env, int argc, char **argv)
+  {
+!     int vim_main_result;
+! #ifdef TRAMPOLINED_MZVIM_STARTUP
+!     /* Scheme has created the environment for us */
+!     environment = env;
+! #else
+! # ifdef MZ_PRECISE_GC
+      Scheme_Object   *dummy = NULL;
+      MZ_GC_DECL_REG(1);
+      MZ_GC_VAR_IN_REG(0, dummy);
+  
+      stack_base = &__gc_var_stack__;
+  # else
+      int dummy = 0;
+      stack_base = (void *)&dummy;
++ # endif
+  #endif
+! 
+!     /* mzscheme_main is called as a trampoline from main.
+!      * We trampoline into vim_main2
+!      * Passing argc, argv through from mzscheme_main
+!      */
+!     vim_main_result = vim_main2(argc, argv);
+! #if !defined(TRAMPOLINED_MZVIM_STARTUP) && defined(MZ_PRECISE_GC)
+      /* releasing dummy */
+      MZ_GC_REG();
+      MZ_GC_UNREG();
+  #endif
+!     return vim_main_result;
+  }
+  
+      static void
+  startup_mzscheme(void)
+  {
+! #ifndef TRAMPOLINED_MZVIM_STARTUP
+      scheme_set_stack_base(stack_base, 1);
+  #endif
+  
+***************
+*** 868,874 ****
+      MZ_REGISTER_STATIC(exn_message);
+      MZ_REGISTER_STATIC(vim_exn);
+  
+! #if !defined(MZ_PRECISE_GC) || MZSCHEME_VERSION_MAJOR < 400
+      /* in newer versions of precise GC the initial env has been created */
+      environment = scheme_basic_env();
+  #endif
+--- 869,875 ----
+      MZ_REGISTER_STATIC(exn_message);
+      MZ_REGISTER_STATIC(vim_exn);
+  
+! #ifndef TRAMPOLINED_MZVIM_STARTUP
+      /* in newer versions of precise GC the initial env has been created */
+      environment = scheme_basic_env();
+  #endif
+***************
+*** 3013,3019 ****
+  	MZ_GC_REG();
+  
+  	tmp = scheme_make_struct_names(exn_name, scheme_null, 0, &nc);
+- 	assert(nc <= 5);
+  	mch_memmove(exn_names, tmp, nc * sizeof(Scheme_Object *));
+  	MZ_GC_CHECK();
+  
+--- 3014,3019 ----
+*** ../vim-7.3.440/src/main.c	2011-12-08 15:57:54.000000000 +0100
+--- src/main.c	2012-02-12 01:49:50.000000000 +0100
+***************
+*** 554,559 ****
+--- 554,584 ----
+      debug_break_level = params.use_debug_break_level;
+  #endif
+  
++ #ifdef FEAT_MZSCHEME
++     /*
++      * Newer version of MzScheme (Racket) require earlier (trampolined)
++      * initialisation via scheme_main_setup.
++      * Implement this by initialising it as early as possible
++      * and splitting off remaining Vim main into vim_main2
++      */
++     {
++ 	/* Pack up preprocessed command line arguments.
++ 	 * It is safe because Scheme does not access argc/argv. */
++ 	char *args[2];
++ 	args[0] = (char *)fname;
++ 	args[1] = (char *)&params;
++ 	return mzscheme_main(2, args);
++     }
++ }
++ 
++ int vim_main2(int argc, char **argv)
++ {
++     char_u	*fname = (char_u *)argv[0];
++     mparm_T	params;
++ 
++     memcpy(&params, argv[1], sizeof(params));
++ #endif
++ 
+      /* Execute --cmd arguments. */
+      exe_pre_commands(&params);
+  
+***************
+*** 957,970 ****
+  
+      /*
+       * Call the main command loop.  This never returns.
+!      * For embedded MzScheme the main_loop will be called by Scheme
+!      * for proper stack tracking
+!      */
+! #ifndef FEAT_MZSCHEME
+      main_loop(FALSE, FALSE);
+- #else
+-     mzscheme_main();
+- #endif
+  
+      return 0;
+  }
+--- 982,989 ----
+  
+      /*
+       * Call the main command loop.  This never returns.
+!     */
+      main_loop(FALSE, FALSE);
+  
+      return 0;
+  }
+*** ../vim-7.3.440/src/proto/if_mzsch.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/if_mzsch.pro	2012-02-12 01:50:57.000000000 +0100
+***************
+*** 14,19 ****
+  void mzvim_reset_timer __ARGS((void));
+  void *mzvim_eval_string __ARGS((char_u *str));
+  int mzthreads_allowed __ARGS((void));
+! void mzscheme_main __ARGS((void));
+  void do_mzeval __ARGS((char_u *str, typval_T *rettv));
+  /* vim: set ft=c : */
+--- 14,20 ----
+  void mzvim_reset_timer __ARGS((void));
+  void *mzvim_eval_string __ARGS((char_u *str));
+  int mzthreads_allowed __ARGS((void));
+! int mzscheme_main __ARGS((int argc, char **argv));
+  void do_mzeval __ARGS((char_u *str, typval_T *rettv));
++ int vim_main2 __ARGS((int argc, char **argv));
+  /* vim: set ft=c : */
+*** ../vim-7.3.440/src/version.c	2012-02-12 01:35:06.000000000 +0100
+--- src/version.c	2012-02-12 01:54:14.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     441,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+43. You tell the kids they can't use the computer because "Daddy's got work to
+    do" and you don't even have a job.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.442 b/source/ap/vim/patches/7.3.442
new file mode 100644
index 00000000..58b58b4e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.442
@@ -0,0 +1,186 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.442
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.442 (after 7.3.438) 
+Problem:    Still read modelines for ":doautocmd". 
+Solution:   Move check for <nomodeline> to separate function. 
+Files:      src/fileio.c, src/ex_docmd.c, src/proto/fileio.pro, 
+            runtime/doc/autocmd.txt 
+
+
+*** ../vim-7.3.441/src/fileio.c	2012-02-12 00:18:54.000000000 +0100
+--- src/fileio.c	2012-02-12 20:05:35.000000000 +0100
+***************
+*** 8740,8752 ****
+      aco_save_T	aco;
+      buf_T	*buf;
+      char_u	*arg = eap->arg;
+!     int		call_do_modelines = TRUE;
+! 
+!     if (STRNCMP(arg, "<nomodeline>", 12) == 0)
+!     {
+! 	call_do_modelines = FALSE;
+! 	arg = skipwhite(arg + 12);
+!     }
+  
+      /*
+       * This is a bit tricky: For some commands curwin->w_buffer needs to be
+--- 8740,8746 ----
+      aco_save_T	aco;
+      buf_T	*buf;
+      char_u	*arg = eap->arg;
+!     int		call_do_modelines = check_nomodeline(&arg);
+  
+      /*
+       * This is a bit tricky: For some commands curwin->w_buffer needs to be
+***************
+*** 8786,8791 ****
+--- 8780,8802 ----
+  }
+  
+  /*
++  * Check *argp for <nomodeline>.  When it is present return FALSE, otherwise
++  * return TRUE and advance *argp to after it.
++  * Thus return TRUE when do_modelines() should be called.
++  */
++     int
++ check_nomodeline(argp)
++     char_u **argp;
++ {
++     if (STRNCMP(*argp, "<nomodeline>", 12) == 0)
++     {
++ 	*argp = skipwhite(*argp + 12);
++ 	return FALSE;
++     }
++     return TRUE;
++ }
++ 
++ /*
+   * Prepare for executing autocommands for (hidden) buffer "buf".
+   * Search for a visible window containing the current buffer.  If there isn't
+   * one then use "aucmd_win".
+*** ../vim-7.3.441/src/ex_docmd.c	2012-01-26 20:41:22.000000000 +0100
+--- src/ex_docmd.c	2012-02-12 20:05:18.000000000 +0100
+***************
+*** 4955,4961 ****
+      map_clear(eap->cmd, eap->arg, TRUE, TRUE);
+  }
+  
+! #ifdef FEAT_AUTOCMD
+      static void
+  ex_autocmd(eap)
+      exarg_T	*eap;
+--- 4955,4961 ----
+      map_clear(eap->cmd, eap->arg, TRUE, TRUE);
+  }
+  
+! #if defined(FEAT_AUTOCMD) || defined(PROTO)
+      static void
+  ex_autocmd(eap)
+      exarg_T	*eap;
+***************
+*** 4982,4989 ****
+  ex_doautocmd(eap)
+      exarg_T	*eap;
+  {
+!     (void)do_doautocmd(eap->arg, TRUE);
+!     do_modelines(0);
+  }
+  #endif
+  
+--- 4982,4993 ----
+  ex_doautocmd(eap)
+      exarg_T	*eap;
+  {
+!     char_u	*arg = eap->arg;
+!     int		call_do_modelines = check_nomodeline(&arg);
+! 
+!     (void)do_doautocmd(arg, TRUE);
+!     if (call_do_modelines)  /* Only when there is no <nomodeline>. */
+! 	do_modelines(0);
+  }
+  #endif
+  
+*** ../vim-7.3.441/src/proto/fileio.pro	2010-12-17 16:27:10.000000000 +0100
+--- src/proto/fileio.pro	2012-02-12 20:05:26.000000000 +0100
+***************
+*** 35,40 ****
+--- 35,41 ----
+  void do_autocmd __ARGS((char_u *arg, int forceit));
+  int do_doautocmd __ARGS((char_u *arg, int do_msg));
+  void ex_doautoall __ARGS((exarg_T *eap));
++ int check_nomodeline __ARGS((char_u **argp));
+  void aucmd_prepbuf __ARGS((aco_save_T *aco, buf_T *buf));
+  void aucmd_restbuf __ARGS((aco_save_T *aco));
+  int apply_autocmds __ARGS((event_T event, char_u *fname, char_u *fname_io, int force, buf_T *buf));
+*** ../vim-7.3.441/runtime/doc/autocmd.txt	2012-02-12 00:18:54.000000000 +0100
+--- runtime/doc/autocmd.txt	2012-02-12 20:11:05.000000000 +0100
+***************
+*** 1064,1069 ****
+--- 1072,1085 ----
+  			argument is included, Vim executes only the matching
+  			autocommands for that group.  Note: if you use an
+  			undefined group name, Vim gives you an error message.
++ 							*<nomodeline>*
++ 			After applying the autocommands the modelines are
++ 			processed, so that their settings overrule the
++ 			settings from autocommands, like what happens when
++ 			editing a file. This is skipped when the <nomodeline>
++ 			argument is present. You probably want to use
++ 			<nomodeline> for events that are not used when loading
++ 			a buffer, such as |User|.
+  
+  						*:doautoa* *:doautoall*
+  :doautoa[ll] [<nomodeline>] [group] {event} [fname]
+***************
+*** 1077,1088 ****
+  			This command is intended for autocommands that set
+  			options, change highlighting, and things like that.
+  
+- 			After applying the autocommands the modelines are
+- 			processed, so that their settings overrule the
+- 			settings from autocommands, like what happens when
+- 			editing a file. This is skipped when the <nomodeline>
+- 			argument is present.
+- 
+  ==============================================================================
+  10. Using autocommands					*autocmd-use*
+  
+--- 1093,1098 ----
+*** ../vim-7.3.441/src/version.c	2012-02-12 01:55:50.000000000 +0100
+--- src/version.c	2012-02-12 20:11:34.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     442,
+  /**/
+
+-- 
+The real
+trick is
+this: to
+keep the
+lines as
+short as
+possible
+and keep
+the size
+the same
+yet free
+from the
+need for
+hyphena-
+Dammit!!  (Matthew Winn)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.443 b/source/ap/vim/patches/7.3.443
new file mode 100644
index 00000000..84b45baa
--- /dev/null
+++ b/source/ap/vim/patches/7.3.443
@@ -0,0 +1,206 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.443
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.443
+Problem:    MS-Windows: 'shcf' and 'shellxquote' defaults are not very good.
+Solution:   Make a better guess when 'shell' is set to "cmd.exe". (Ben Fritz)
+Files:      src/option.c, runtime/doc/options.txt
+
+
+*** ../vim-7.3.442/src/option.c	2012-01-28 18:03:30.000000000 +0100
+--- src/option.c	2012-02-12 23:17:55.000000000 +0100
+***************
+*** 3883,3889 ****
+  
+  #if defined(MSDOS) || defined(WIN3264) || defined(OS2)
+      /*
+!      * Set 'shellcmdflag and 'shellquote' depending on the 'shell' option.
+       * This is done after other initializations, where 'shell' might have been
+       * set, but only if they have not been set before.  Default for p_shcf is
+       * "/c", for p_shq is "".  For "sh" like  shells it is changed here to
+--- 3883,3890 ----
+  
+  #if defined(MSDOS) || defined(WIN3264) || defined(OS2)
+      /*
+!      * Set 'shellcmdflag', 'shellxquote', and 'shellquote' depending on the
+!      * 'shell' option.
+       * This is done after other initializations, where 'shell' might have been
+       * set, but only if they have not been set before.  Default for p_shcf is
+       * "/c", for p_shq is "".  For "sh" like  shells it is changed here to
+***************
+*** 3920,3925 ****
+--- 3921,3962 ----
+  #  endif
+  # endif
+      }
++     else if (strstr((char *)gettail(p_sh), "cmd.exe") != NULL)
++     {
++ 	int	idx3;
++ 
++ 	/*
++ 	 * cmd.exe on Windows will strip the first and last double quote given
++ 	 * on the command line, e.g. most of the time things like:
++ 	 *   cmd /c "my path/to/echo" "my args to echo"
++ 	 * become:
++ 	 *   my path/to/echo" "my args to echo
++ 	 * when executed.
++ 	 *
++ 	 * To avoid this, use the /s argument in addition to /c to force the
++ 	 * stripping behavior, and also set shellxquote to automatically
++ 	 * surround the entire command in quotes (which get stripped as
++ 	 * noted).
++ 	 */
++ 
++ 	/* Set shellxquote default to add the quotes to be stripped. */
++ 	idx3 = findoption((char_u *)"sxq");
++ 	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
++ 	{
++ 	    p_sxq = (char_u *)"\"";
++ 	    options[idx3].def_val[VI_DEFAULT] = p_sxq;
++ 	}
++ 
++ 	/* Set shellcmdflag default to always strip the quotes, note the order
++ 	 * between /s and /c is important or cmd.exe will treat the /s as part
++ 	 * of the command to be executed.  */
++ 	idx3 = findoption((char_u *)"shcf");
++ 	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
++ 	{
++ 	    p_shcf = (char_u *)"/s /c";
++ 	    options[idx3].def_val[VI_DEFAULT] = p_shcf;
++ 	}
++     }
+  #endif
+  
+  #ifdef FEAT_TITLE
+*** ../vim-7.3.442/runtime/doc/options.txt	2011-06-26 05:36:07.000000000 +0200
+--- runtime/doc/options.txt	2012-02-12 23:21:59.000000000 +0100
+***************
+*** 5880,5895 ****
+  	security reasons.
+  
+  						*'shellcmdflag'* *'shcf'*
+! 'shellcmdflag' 'shcf'	string	(default: "-c", MS-DOS and Win32, when 'shell'
+! 					does not contain "sh" somewhere: "/c")
+  			global
+  			{not in Vi}
+  	Flag passed to the shell to execute "!" and ":!" commands; e.g.,
+  	"bash.exe -c ls" or "command.com /c dir".  For the MS-DOS-like
+  	systems, the default is set according to the value of 'shell', to
+  	reduce the need to set this option by the user.  It's not used for
+! 	OS/2 (EMX figures this out itself).  See |option-backslash| about
+! 	including spaces and backslashes.  See |dos-shell|.
+  	This option cannot be set from a |modeline| or in the |sandbox|, for
+  	security reasons.
+  
+--- 5899,5919 ----
+  	security reasons.
+  
+  						*'shellcmdflag'* *'shcf'*
+! 'shellcmdflag' 'shcf'	string	(default: "-c";
+! 				 Win32, when 'shell' is cmd.exe: "/s /c";
+! 				 MS-DOS and Win32, when 'shell' neither is
+! 				 cmd.exe nor contains "sh" somewhere: "/c")
+  			global
+  			{not in Vi}
+  	Flag passed to the shell to execute "!" and ":!" commands; e.g.,
+  	"bash.exe -c ls" or "command.com /c dir".  For the MS-DOS-like
+  	systems, the default is set according to the value of 'shell', to
+  	reduce the need to set this option by the user.  It's not used for
+! 	OS/2 (EMX figures this out itself).
+! 	On Unix it can have more than one flag.  Each white space separated
+! 	part is passed as an argument to the shell command.
+! 	See |option-backslash| about including spaces and backslashes.
+! 	Also see |dos-shell| for MS-DOS and MS-Windows.
+  	This option cannot be set from a |modeline| or in the |sandbox|, for
+  	security reasons.
+  
+***************
+*** 5910,5918 ****
+  	For Unix the default it "| tee".  The stdout of the compiler is saved
+  	in a file and echoed to the screen.  If the 'shell' option is "csh" or
+  	"tcsh" after initializations, the default becomes "|& tee".  If the
+! 	'shell' option is "sh", "ksh", "zsh" or "bash" the default becomes
+! 	"2>&1| tee".  This means that stderr is also included.  Before using
+! 	the 'shell' option a path is removed, thus "/bin/sh" uses "sh".
+  	The initialization of this option is done after reading the ".vimrc"
+  	and the other initializations, so that when the 'shell' option is set
+  	there, the 'shellpipe' option changes automatically, unless it was
+--- 5934,5943 ----
+  	For Unix the default it "| tee".  The stdout of the compiler is saved
+  	in a file and echoed to the screen.  If the 'shell' option is "csh" or
+  	"tcsh" after initializations, the default becomes "|& tee".  If the
+! 	'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh" or "bash" the
+! 	default becomes "2>&1| tee".  This means that stderr is also included.
+! 	Before using the 'shell' option a path is removed, thus "/bin/sh" uses
+! 	"sh".
+  	The initialization of this option is done after reading the ".vimrc"
+  	and the other initializations, so that when the 'shell' option is set
+  	there, the 'shellpipe' option changes automatically, unless it was
+***************
+*** 6017,6024 ****
+  
+  						*'shellxquote'* *'sxq'*
+  'shellxquote' 'sxq'	string	(default: "";
+! 					for Win32, when 'shell' contains "sh"
+! 					somewhere: "\""
+  					for Unix, when using system(): "\"")
+  			global
+  			{not in Vi}
+--- 6043,6050 ----
+  
+  						*'shellxquote'* *'sxq'*
+  'shellxquote' 'sxq'	string	(default: "";
+! 					for Win32, when 'shell' is cmd.exe or
+! 					contains "sh" somewhere: "\""
+  					for Unix, when using system(): "\"")
+  			global
+  			{not in Vi}
+***************
+*** 6026,6036 ****
+  	the "!" and ":!" commands.  Includes the redirection.  See
+  	'shellquote' to exclude the redirection.  It's probably not useful
+  	to set both options.
+! 	This is an empty string by default.  Known to be useful for
+! 	third-party shells when using the Win32 version, such as the MKS Korn
+! 	Shell or bash, where it should be "\"".  The default is adjusted
+! 	according the value of 'shell', to reduce the need to set this option
+! 	by the user.  See |dos-shell|.
+  	This option cannot be set from a |modeline| or in the |sandbox|, for
+  	security reasons.
+  
+--- 6052,6063 ----
+  	the "!" and ":!" commands.  Includes the redirection.  See
+  	'shellquote' to exclude the redirection.  It's probably not useful
+  	to set both options.
+! 	This is an empty string by default on most systems, but is known to be
+! 	useful for on Win32 version, either for cmd.exe which automatically
+! 	strips off the first and last quote on a command, or 3rd-party shells
+! 	such as the MKS Korn Shell or bash, where it should be "\"".  The
+! 	default is adjusted according the value of 'shell', to reduce the need
+! 	to set this option by the user.  See |dos-shell|.
+  	This option cannot be set from a |modeline| or in the |sandbox|, for
+  	security reasons.
+  
+*** ../vim-7.3.442/src/version.c	2012-02-12 20:13:55.000000000 +0100
+--- src/version.c	2012-02-12 23:18:40.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     443,
+  /**/
+
+-- 
+CVS sux, men don't like commitment
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.444 b/source/ap/vim/patches/7.3.444
new file mode 100644
index 00000000..64ed88bf
--- /dev/null
+++ b/source/ap/vim/patches/7.3.444
@@ -0,0 +1,96 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.444
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.444
+Problem:    ":all!" and ":sall!" give error E477, even though the
+            documentation says these are valid commands.
+Solution:   Support the exclamation mark. (Hirohito Higashi)
+Files:      src/ex_cmds.h, src/testdir/test31.in, src/testdir/test31.ok
+
+
+*** ../vim-7.3.443/src/ex_cmds.h	2011-06-20 05:02:53.000000000 +0200
+--- src/ex_cmds.h	2012-02-12 23:53:31.000000000 +0100
+***************
+*** 102,108 ****
+  EX(CMD_aboveleft,	"aboveleft",	ex_wrongmodifier,
+  			NEEDARG|EXTRA|NOTRLCOM),
+  EX(CMD_all,		"all",		ex_all,
+! 			RANGE|NOTADR|COUNT|TRLBAR),
+  EX(CMD_amenu,		"amenu",	ex_menu,
+  			RANGE|NOTADR|ZEROR|EXTRA|TRLBAR|NOTRLCOM|USECTRLV|CMDWIN),
+  EX(CMD_anoremenu,	"anoremenu",	ex_menu,
+--- 102,108 ----
+  EX(CMD_aboveleft,	"aboveleft",	ex_wrongmodifier,
+  			NEEDARG|EXTRA|NOTRLCOM),
+  EX(CMD_all,		"all",		ex_all,
+! 			BANG|RANGE|NOTADR|COUNT|TRLBAR),
+  EX(CMD_amenu,		"amenu",	ex_menu,
+  			RANGE|NOTADR|ZEROR|EXTRA|TRLBAR|NOTRLCOM|USECTRLV|CMDWIN),
+  EX(CMD_anoremenu,	"anoremenu",	ex_menu,
+***************
+*** 798,804 ****
+  EX(CMD_sargument,	"sargument",	ex_argument,
+  			BANG|RANGE|NOTADR|COUNT|EXTRA|EDITCMD|ARGOPT|TRLBAR),
+  EX(CMD_sall,		"sall",		ex_all,
+! 			RANGE|NOTADR|COUNT|TRLBAR),
+  EX(CMD_sandbox,		"sandbox",	ex_wrongmodifier,
+  			NEEDARG|EXTRA|NOTRLCOM),
+  EX(CMD_saveas,		"saveas",	ex_write,
+--- 798,804 ----
+  EX(CMD_sargument,	"sargument",	ex_argument,
+  			BANG|RANGE|NOTADR|COUNT|EXTRA|EDITCMD|ARGOPT|TRLBAR),
+  EX(CMD_sall,		"sall",		ex_all,
+! 			BANG|RANGE|NOTADR|COUNT|TRLBAR),
+  EX(CMD_sandbox,		"sandbox",	ex_wrongmodifier,
+  			NEEDARG|EXTRA|NOTRLCOM),
+  EX(CMD_saveas,		"saveas",	ex_write,
+*** ../vim-7.3.443/src/testdir/test31.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test31.in	2012-02-12 23:57:42.000000000 +0100
+***************
+*** 63,68 ****
+--- 63,74 ----
+  :" write "testtext 1"
+  A 3:close!
+  :w >>test.out
++ :set nohidden
++ :" test ":all!" hides changed buffer; write "testtext 2 2 2"
++ :sp Xtest4
++ GA 4:all!
++ :1wincmd w
++ :w >>test.out
+  :qa!
+  ENDTEST
+  
+*** ../vim-7.3.443/src/testdir/test31.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test31.ok	2012-02-13 00:00:13.000000000 +0100
+***************
+*** 9,11 ****
+--- 9,12 ----
+  testtext 1
+  testtext 3 3 3
+  testtext 1
++ testtext 2 2 2
+*** ../vim-7.3.443/src/version.c	2012-02-12 23:23:25.000000000 +0100
+--- src/version.c	2012-02-12 23:52:47.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     444,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+50. The last girl you picked up was only a jpeg.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.445 b/source/ap/vim/patches/7.3.445
new file mode 100644
index 00000000..8d7c337b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.445
@@ -0,0 +1,199 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.445
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.445 (after 7.3.443)
+Problem:    Can't properly escape commands for cmd.exe.
+Solution:   Default 'shellxquote' to '('.  Append ')' to make '(command)'.
+	    No need to use "/s" for 'shellcmdflag'.
+Files:	    src/misc2.c, src/option.c, src/os_win32.c
+
+
+*** ../vim-7.3.444/src/misc2.c	2012-01-20 17:15:47.000000000 +0100
+--- src/misc2.c	2012-02-16 05:34:37.000000000 +0100
+***************
+*** 3230,3236 ****
+  	    {
+  		STRCPY(ncmd, p_sxq);
+  		STRCAT(ncmd, cmd);
+! 		STRCAT(ncmd, p_sxq);
+  		retval = mch_call_shell(ncmd, opt);
+  		vim_free(ncmd);
+  	    }
+--- 3230,3240 ----
+  	    {
+  		STRCPY(ncmd, p_sxq);
+  		STRCAT(ncmd, cmd);
+! 		/* When 'shellxquote' is ( append ).
+! 		 * When 'shellxquote' is "( append )". */
+! 		STRCAT(ncmd, STRCMP(p_sxq, "(") == 0 ? (char_u *)")"
+! 			   : STRCMP(p_sxq, "\"(") == 0 ? (char_u *)")\""
+! 			   : p_sxq);
+  		retval = mch_call_shell(ncmd, opt);
+  		vim_free(ncmd);
+  	    }
+*** ../vim-7.3.444/src/option.c	2012-02-12 23:23:25.000000000 +0100
+--- src/option.c	2012-02-19 18:08:48.000000000 +0100
+***************
+*** 3933,3959 ****
+  	 *   my path/to/echo" "my args to echo
+  	 * when executed.
+  	 *
+! 	 * To avoid this, use the /s argument in addition to /c to force the
+! 	 * stripping behavior, and also set shellxquote to automatically
+! 	 * surround the entire command in quotes (which get stripped as
+! 	 * noted).
+  	 */
+- 
+- 	/* Set shellxquote default to add the quotes to be stripped. */
+  	idx3 = findoption((char_u *)"sxq");
+  	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
+  	{
+! 	    p_sxq = (char_u *)"\"";
+  	    options[idx3].def_val[VI_DEFAULT] = p_sxq;
+  	}
+  
+- 	/* Set shellcmdflag default to always strip the quotes, note the order
+- 	 * between /s and /c is important or cmd.exe will treat the /s as part
+- 	 * of the command to be executed.  */
+  	idx3 = findoption((char_u *)"shcf");
+  	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
+  	{
+! 	    p_shcf = (char_u *)"/s /c";
+  	    options[idx3].def_val[VI_DEFAULT] = p_shcf;
+  	}
+      }
+--- 3933,3954 ----
+  	 *   my path/to/echo" "my args to echo
+  	 * when executed.
+  	 *
+! 	 * To avoid this, set shellxquote to surround the command in
+! 	 * parenthesis.  This appears to make most commands work, without
+! 	 * breaking commands that worked previously, such as
+! 	 * '"path with spaces/cmd" "a&b"'.
+  	 */
+  	idx3 = findoption((char_u *)"sxq");
+  	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
+  	{
+! 	    p_sxq = (char_u *)"(";
+  	    options[idx3].def_val[VI_DEFAULT] = p_sxq;
+  	}
+  
+  	idx3 = findoption((char_u *)"shcf");
+  	if (idx3 >= 0 && !(options[idx3].flags & P_WAS_SET))
+  	{
+! 	    p_shcf = (char_u *)"/c";
+  	    options[idx3].def_val[VI_DEFAULT] = p_shcf;
+  	}
+      }
+*** ../vim-7.3.444/src/os_win32.c	2011-08-27 15:10:00.000000000 +0200
+--- src/os_win32.c	2012-02-19 18:11:23.000000000 +0100
+***************
+*** 3908,3915 ****
+  	newcmd = lalloc(cmdlen, TRUE);
+  	if (newcmd != NULL)
+  	{
+! 	    char_u *cmdbase = (*cmd == '"' ? cmd + 1 : cmd);
+  
+  	    if ((STRNICMP(cmdbase, "start", 5) == 0) && vim_iswhite(cmdbase[5]))
+  	    {
+  		STARTUPINFO		si;
+--- 3908,3920 ----
+  	newcmd = lalloc(cmdlen, TRUE);
+  	if (newcmd != NULL)
+  	{
+! 	    char_u *cmdbase = cmd;
+  
++ 	    /* Skip a leading ", ( and "(. */
++ 	    if (*cmdbase == '"' )
++ 		++cmdbase;
++ 	    if (*cmdbase == '(')
++ 		++cmdbase;
+  	    if ((STRNICMP(cmdbase, "start", 5) == 0) && vim_iswhite(cmdbase[5]))
+  	    {
+  		STARTUPINFO		si;
+***************
+*** 3953,3968 ****
+  		 * empty, keep the double quotes around the command.
+  		 * Otherwise remove the double quotes, they aren't needed
+  		 * here, because we don't use a shell to run the command. */
+! 		if (*cmd == '"' && *p_sxq == NUL)
+  		{
+! 		    newcmd[0] = '"';
+! 		    STRCPY(newcmd + 1, cmdbase);
+! 		}
+! 		else
+! 		{
+! 		    STRCPY(newcmd, cmdbase);
+! 		    if (*cmd == '"' && *newcmd != NUL)
+! 			newcmd[STRLEN(newcmd) - 1] = NUL;
+  		}
+  
+  		/*
+--- 3958,3983 ----
+  		 * empty, keep the double quotes around the command.
+  		 * Otherwise remove the double quotes, they aren't needed
+  		 * here, because we don't use a shell to run the command. */
+! 		if (cmdbase > cmd)
+  		{
+! 		    if (STRNCMP(cmd, p_sxq, cmd - cmdbase) != 0)
+! 		    {
+! 			STRCPY(newcmd, cmd);
+! 		    }
+! 		    else
+! 		    {
+! 			char_u *p;
+! 
+! 			STRCPY(newcmd, cmdbase);
+! 			/* Remove a trailing ", ) and )" if they have a match
+! 			 * at the start of the command. */
+! 			p = newcmd + STRLEN(newcmd);
+! 			if (p > newcmd && p[-1] == '"' && *cmd == '"')
+! 			    *--p = NUL;
+! 			if (p > newcmd && p[-1] == ')'
+! 					     && (*cmd =='(' || cmd[1] == '('))
+! 			    *--p = NUL;
+! 		    }
+  		}
+  
+  		/*
+***************
+*** 3970,3976 ****
+  		 * inherit our handles which causes unpleasant dangling swap
+  		 * files if we exit before the spawned process
+  		 */
+! 		if (CreateProcess (NULL,	// Executable name
+  			newcmd,			// Command to execute
+  			NULL,			// Process security attributes
+  			NULL,			// Thread security attributes
+--- 3985,3991 ----
+  		 * inherit our handles which causes unpleasant dangling swap
+  		 * files if we exit before the spawned process
+  		 */
+! 		if (CreateProcess(NULL,		// Executable name
+  			newcmd,			// Command to execute
+  			NULL,			// Process security attributes
+  			NULL,			// Thread security attributes
+*** ../vim-7.3.444/src/version.c	2012-02-13 00:01:38.000000000 +0100
+--- src/version.c	2012-02-19 18:01:46.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     445,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+80. At parties, you introduce your spouse as your "service provider."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.446 b/source/ap/vim/patches/7.3.446
new file mode 100644
index 00000000..59a2b254
--- /dev/null
+++ b/source/ap/vim/patches/7.3.446
@@ -0,0 +1,164 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.446
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.446 (after 7.3.445)
+Problem:    Win32: External commands with special characters don't work.
+Solution:   Add the 'shellxescape' option.
+Files:	    src/misc2.c, src/option.c, src/option.h, runtime/doc/options.txt
+
+
+*** ../vim-7.3.445/src/misc2.c	2012-02-19 18:19:24.000000000 +0100
+--- src/misc2.c	2012-02-20 22:05:22.000000000 +0100
+***************
+*** 3225,3235 ****
+  	    retval = mch_call_shell(cmd, opt);
+  	else
+  	{
+! 	    ncmd = alloc((unsigned)(STRLEN(cmd) + STRLEN(p_sxq) * 2 + 1));
+  	    if (ncmd != NULL)
+  	    {
+  		STRCPY(ncmd, p_sxq);
+! 		STRCAT(ncmd, cmd);
+  		/* When 'shellxquote' is ( append ).
+  		 * When 'shellxquote' is "( append )". */
+  		STRCAT(ncmd, STRCMP(p_sxq, "(") == 0 ? (char_u *)")"
+--- 3225,3243 ----
+  	    retval = mch_call_shell(cmd, opt);
+  	else
+  	{
+! 	    char_u *ecmd = cmd;
+! 
+! 	    if (*p_sxe != NUL && STRCMP(p_sxq, "(") == 0)
+! 	    {
+! 		ecmd = vim_strsave_escaped_ext(cmd, p_sxe, '^', FALSE);
+! 		if (ecmd == NULL)
+! 		    ecmd = cmd;
+! 	    }
+! 	    ncmd = alloc((unsigned)(STRLEN(ecmd) + STRLEN(p_sxq) * 2 + 1));
+  	    if (ncmd != NULL)
+  	    {
+  		STRCPY(ncmd, p_sxq);
+! 		STRCAT(ncmd, ecmd);
+  		/* When 'shellxquote' is ( append ).
+  		 * When 'shellxquote' is "( append )". */
+  		STRCAT(ncmd, STRCMP(p_sxq, "(") == 0 ? (char_u *)")"
+***************
+*** 3240,3245 ****
+--- 3248,3255 ----
+  	    }
+  	    else
+  		retval = -1;
++ 	    if (ecmd != cmd)
++ 		vim_free(ecmd);
+  	}
+  #ifdef FEAT_GUI
+  	--hold_gui_events;
+*** ../vim-7.3.445/src/option.c	2012-02-19 18:19:24.000000000 +0100
+--- src/option.c	2012-02-20 22:01:07.000000000 +0100
+***************
+*** 2273,2278 ****
+--- 2273,2287 ----
+  			    (char_u *)"",
+  #endif
+  				(char_u *)0L} SCRIPTID_INIT},
++     {"shellxescape", "sxe", P_STRING|P_VI_DEF|P_SECURE,
++ 			    (char_u *)&p_sxe, PV_NONE,
++ 			    {
++ #if defined(MSDOS) || defined(WIN16) || defined(WIN3264)
++ 			    (char_u *)"\"&|<>()@^",
++ #else
++ 			    (char_u *)"",
++ #endif
++ 				(char_u *)0L} SCRIPTID_INIT},
+      {"shiftround",  "sr",   P_BOOL|P_VI_DEF|P_VIM,
+  			    (char_u *)&p_sr, PV_NONE,
+  			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
+*** ../vim-7.3.445/src/option.h	2011-10-20 21:09:25.000000000 +0200
+--- src/option.h	2012-02-20 21:45:31.000000000 +0100
+***************
+*** 712,717 ****
+--- 712,718 ----
+  #endif
+  EXTERN char_u	*p_shq;		/* 'shellquote' */
+  EXTERN char_u	*p_sxq;		/* 'shellxquote' */
++ EXTERN char_u	*p_sxe;		/* 'shellxescape' */
+  EXTERN char_u	*p_srr;		/* 'shellredir' */
+  #ifdef AMIGA
+  EXTERN long	p_st;		/* 'shelltype' */
+*** ../vim-7.3.445/runtime/doc/options.txt	2012-02-12 23:23:25.000000000 +0100
+--- runtime/doc/options.txt	2012-02-20 22:09:19.000000000 +0100
+***************
+*** 6023,6030 ****
+  
+  						*'shellxquote'* *'sxq'*
+  'shellxquote' 'sxq'	string	(default: "";
+! 					for Win32, when 'shell' is cmd.exe or
+! 					contains "sh" somewhere: "\""
+  					for Unix, when using system(): "\"")
+  			global
+  			{not in Vi}
+--- 6042,6050 ----
+  
+  						*'shellxquote'* *'sxq'*
+  'shellxquote' 'sxq'	string	(default: "";
+! 					for Win32, when 'shell' is cmd.exe: "("
+! 					for Win32, when 'shell' contains "sh"
+! 					somewhere: "\""
+  					for Unix, when using system(): "\"")
+  			global
+  			{not in Vi}
+***************
+*** 6032,6037 ****
+--- 6052,6060 ----
+  	the "!" and ":!" commands.  Includes the redirection.  See
+  	'shellquote' to exclude the redirection.  It's probably not useful
+  	to set both options.
++ 	When the value is '(' then ')' is appended. When the value is '"('
++ 	then ')"' is appended.
++ 	When the value is '(' then also see 'shellxescape'.
+  	This is an empty string by default on most systems, but is known to be
+  	useful for on Win32 version, either for cmd.exe which automatically
+  	strips off the first and last quote on a command, or 3rd-party shells
+***************
+*** 6041,6046 ****
+--- 6064,6079 ----
+  	This option cannot be set from a |modeline| or in the |sandbox|, for
+  	security reasons.
+  
++ 						*'shellxescape'* *'sxe'*
++ 'shellxescape' 'sxe'	string	(default: "";
++ 				 for MS-DOS and MS-Windows: "\"&|<>()@^")
++ 			global
++ 			{not in Vi}
++ 	When 'shellxquote' is set to "(" then the characters listed in this
++ 	option will be escaped with a '^' character.  This makes it possible
++ 	to execute most external commands with cmd.exe.
++ 
++ 
+  			*'shiftround'* *'sr'* *'noshiftround'* *'nosr'*
+  'shiftround' 'sr'	boolean	(default off)
+  			global
+*** ../vim-7.3.445/src/version.c	2012-02-19 18:19:24.000000000 +0100
+--- src/version.c	2012-02-20 22:12:32.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     446,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+86. E-mail Deficiency Depression (EDD) forces you to e-mail yourself.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.447 b/source/ap/vim/patches/7.3.447
new file mode 100644
index 00000000..9c0af9f4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.447
@@ -0,0 +1,377 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.447
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.447 (after 7.3.446)
+Problem:    Win32: External commands with "start" do not work.
+Solution:   Unescape part of the command. (Yasuhiro Matsumoto)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.446/src/os_win32.c	2012-02-19 18:19:24.000000000 +0100
+--- src/os_win32.c	2012-02-21 20:56:51.000000000 +0100
+***************
+*** 259,264 ****
+--- 259,287 ----
+  }
+  
+  /*
++  * Unescape characters in "p" that appear in "escaped".
++  */
++     static void
++ unescape_shellxquote(char_u *p, char_u *escaped)
++ {
++     int	    l = STRLEN(p);
++     int	    n;
++ 
++     while (*p != NUL)
++     {
++ 	if (*p == '^' && vim_strchr(escaped, p[1]) != NULL)
++ 	    mch_memmove(p, p + 1, l--);
++ #ifdef FEAT_MBYTE
++ 	n = (*mb_ptr2len)(p);
++ #else
++ 	n = 1;
++ #endif
++ 	p += n;
++ 	l -= n;
++     }
++ }
++ 
++ /*
+   * Load library "name".
+   */
+      HINSTANCE
+***************
+*** 3559,3564 ****
+--- 3582,3588 ----
+      garray_T	ga;
+      int	    delay = 1;
+      DWORD	buffer_off = 0;	/* valid bytes in buffer[] */
++     char	*p = NULL;
+  
+      SECURITY_ATTRIBUTES saAttr;
+  
+***************
+*** 3599,3607 ****
+      if (options & SHELL_READ)
+  	ga_init2(&ga, 1, BUFLEN);
+  
+      /* Now, run the command */
+      CreateProcess(NULL,			/* Executable name */
+! 		  cmd,			/* Command to execute */
+  		  NULL,			/* Process security attributes */
+  		  NULL,			/* Thread security attributes */
+  
+--- 3623,3640 ----
+      if (options & SHELL_READ)
+  	ga_init2(&ga, 1, BUFLEN);
+  
++     if (cmd != NULL)
++     {
++ 	p = (char *)vim_strsave((char_u *)cmd);
++ 	if (p != NULL)
++ 	    unescape_shellxquote((char_u *)p, p_sxe);
++ 	else
++ 	    p = cmd;
++     }
++ 
+      /* Now, run the command */
+      CreateProcess(NULL,			/* Executable name */
+! 		  p,			/* Command to execute */
+  		  NULL,			/* Process security attributes */
+  		  NULL,			/* Thread security attributes */
+  
+***************
+*** 3616,3621 ****
+--- 3649,3656 ----
+  		  &si,			/* Startup information */
+  		  &pi);			/* Process information */
+  
++     if (p != cmd)
++ 	vim_free(p);
+  
+      /* Close our unused side of the pipes */
+      CloseHandle(g_hChildStd_IN_Rd);
+***************
+*** 3898,4018 ****
+      else
+      {
+  	/* we use "command" or "cmd" to start the shell; slow but easy */
+! 	char_u *newcmd;
+! 	long_u cmdlen =  (
+! #ifdef FEAT_GUI_W32
+! 		(allowPiping && !p_stmp ? 0 : STRLEN(vimrun_path)) +
+! #endif
+! 		STRLEN(p_sh) + STRLEN(p_shcf) + STRLEN(cmd) + 10);
+! 
+! 	newcmd = lalloc(cmdlen, TRUE);
+! 	if (newcmd != NULL)
+! 	{
+! 	    char_u *cmdbase = cmd;
+! 
+! 	    /* Skip a leading ", ( and "(. */
+! 	    if (*cmdbase == '"' )
+! 		++cmdbase;
+! 	    if (*cmdbase == '(')
+! 		++cmdbase;
+! 	    if ((STRNICMP(cmdbase, "start", 5) == 0) && vim_iswhite(cmdbase[5]))
+! 	    {
+! 		STARTUPINFO		si;
+! 		PROCESS_INFORMATION	pi;
+! 		DWORD			flags = CREATE_NEW_CONSOLE;
+! 
+! 		si.cb = sizeof(si);
+! 		si.lpReserved = NULL;
+! 		si.lpDesktop = NULL;
+! 		si.lpTitle = NULL;
+! 		si.dwFlags = 0;
+! 		si.cbReserved2 = 0;
+! 		si.lpReserved2 = NULL;
+! 
+! 		cmdbase = skipwhite(cmdbase + 5);
+! 		if ((STRNICMP(cmdbase, "/min", 4) == 0)
+! 			&& vim_iswhite(cmdbase[4]))
+! 		{
+! 		    cmdbase = skipwhite(cmdbase + 4);
+! 		    si.dwFlags = STARTF_USESHOWWINDOW;
+! 		    si.wShowWindow = SW_SHOWMINNOACTIVE;
+! 		}
+! 		else if ((STRNICMP(cmdbase, "/b", 2) == 0)
+! 			&& vim_iswhite(cmdbase[2]))
+! 		{
+! 		    cmdbase = skipwhite(cmdbase + 2);
+! 		    flags = CREATE_NO_WINDOW;
+! 		    si.dwFlags = STARTF_USESTDHANDLES;
+! 		    si.hStdInput = CreateFile("\\\\.\\NUL",	// File name
+! 			GENERIC_READ,				// Access flags
+! 			0,					// Share flags
+! 			NULL,					// Security att.
+! 			OPEN_EXISTING,				// Open flags
+! 			FILE_ATTRIBUTE_NORMAL,			// File att.
+! 			NULL);					// Temp file
+! 		    si.hStdOutput = si.hStdInput;
+! 		    si.hStdError = si.hStdInput;
+! 		}
+  
+! 		/* When the command is in double quotes, but 'shellxquote' is
+! 		 * empty, keep the double quotes around the command.
+! 		 * Otherwise remove the double quotes, they aren't needed
+! 		 * here, because we don't use a shell to run the command. */
+! 		if (cmdbase > cmd)
+! 		{
+! 		    if (STRNCMP(cmd, p_sxq, cmd - cmdbase) != 0)
+! 		    {
+! 			STRCPY(newcmd, cmd);
+! 		    }
+! 		    else
+! 		    {
+! 			char_u *p;
+  
+! 			STRCPY(newcmd, cmdbase);
+! 			/* Remove a trailing ", ) and )" if they have a match
+! 			 * at the start of the command. */
+! 			p = newcmd + STRLEN(newcmd);
+! 			if (p > newcmd && p[-1] == '"' && *cmd == '"')
+! 			    *--p = NUL;
+! 			if (p > newcmd && p[-1] == ')'
+! 					     && (*cmd =='(' || cmd[1] == '('))
+! 			    *--p = NUL;
+! 		    }
+! 		}
+  
+! 		/*
+! 		 * Now, start the command as a process, so that it doesn't
+! 		 * inherit our handles which causes unpleasant dangling swap
+! 		 * files if we exit before the spawned process
+! 		 */
+! 		if (CreateProcess(NULL,		// Executable name
+! 			newcmd,			// Command to execute
+! 			NULL,			// Process security attributes
+! 			NULL,			// Thread security attributes
+! 			FALSE,			// Inherit handles
+! 			flags,			// Creation flags
+! 			NULL,			// Environment
+! 			NULL,			// Current directory
+! 			&si,			// Startup information
+! 			&pi))			// Process information
+! 		    x = 0;
+! 		else
+! 		{
+! 		    x = -1;
+  #ifdef FEAT_GUI_W32
+! 		    EMSG(_("E371: Command not found"));
+  #endif
+- 		}
+- 		if (si.hStdInput != NULL)
+- 		{
+- 		    /* Close the handle to \\.\NUL */
+- 		    CloseHandle(si.hStdInput);
+- 		}
+- 		/* Close the handles to the subprocess, so that it goes away */
+- 		CloseHandle(pi.hThread);
+- 		CloseHandle(pi.hProcess);
+  	    }
+! 	    else
+  	    {
+  #if defined(FEAT_GUI_W32)
+  		if (need_vimrun_warning)
+--- 3933,4048 ----
+      else
+      {
+  	/* we use "command" or "cmd" to start the shell; slow but easy */
+! 	char_u *cmdbase = cmd;
+  
+! 	/* Skip a leading ", ( and "(. */
+! 	if (*cmdbase == '"' )
+! 	    ++cmdbase;
+! 	if (*cmdbase == '(')
+! 	    ++cmdbase;
+! 
+! 	if ((STRNICMP(cmdbase, "start", 5) == 0) && vim_iswhite(cmdbase[5]))
+! 	{
+! 	    STARTUPINFO		si;
+! 	    PROCESS_INFORMATION	pi;
+! 	    DWORD		flags = CREATE_NEW_CONSOLE;
+! 	    char_u		*p;
+! 
+! 	    si.cb = sizeof(si);
+! 	    si.lpReserved = NULL;
+! 	    si.lpDesktop = NULL;
+! 	    si.lpTitle = NULL;
+! 	    si.dwFlags = 0;
+! 	    si.cbReserved2 = 0;
+! 	    si.lpReserved2 = NULL;
+! 
+! 	    cmdbase = skipwhite(cmdbase + 5);
+! 	    if ((STRNICMP(cmdbase, "/min", 4) == 0)
+! 		    && vim_iswhite(cmdbase[4]))
+! 	    {
+! 		cmdbase = skipwhite(cmdbase + 4);
+! 		si.dwFlags = STARTF_USESHOWWINDOW;
+! 		si.wShowWindow = SW_SHOWMINNOACTIVE;
+! 	    }
+! 	    else if ((STRNICMP(cmdbase, "/b", 2) == 0)
+! 		    && vim_iswhite(cmdbase[2]))
+! 	    {
+! 		cmdbase = skipwhite(cmdbase + 2);
+! 		flags = CREATE_NO_WINDOW;
+! 		si.dwFlags = STARTF_USESTDHANDLES;
+! 		si.hStdInput = CreateFile("\\\\.\\NUL",	// File name
+! 		    GENERIC_READ,				// Access flags
+! 		    0,					// Share flags
+! 		    NULL,					// Security att.
+! 		    OPEN_EXISTING,				// Open flags
+! 		    FILE_ATTRIBUTE_NORMAL,			// File att.
+! 		    NULL);					// Temp file
+! 		si.hStdOutput = si.hStdInput;
+! 		si.hStdError = si.hStdInput;
+! 	    }
+! 
+! 	    /* Remove a trailing ", ) and )" if they have a match
+! 	     * at the start of the command. */
+! 	    if (cmdbase > cmd)
+! 	    {
+! 		p = cmdbase + STRLEN(cmdbase);
+! 		if (p > cmdbase && p[-1] == '"' && *cmd == '"')
+! 		    *--p = NUL;
+! 		if (p > cmdbase && p[-1] == ')'
+! 			&& (*cmd =='(' || cmd[1] == '('))
+! 		    *--p = NUL;
+! 	    }
+  
+! 	    /*
+! 	     * Unescape characters in shellxescape. This is workaround for
+! 	     * /b option. Only redirect character should be unescaped.
+! 	     */
+! 	    unescape_shellxquote(cmdbase,
+! 			(flags & CREATE_NEW_CONSOLE) ? p_sxe : "<>");
+  
+! 	    /*
+! 	     * Now, start the command as a process, so that it doesn't
+! 	     * inherit our handles which causes unpleasant dangling swap
+! 	     * files if we exit before the spawned process
+! 	     */
+! 	    if (CreateProcess(NULL,		// Executable name
+! 		    cmdbase,			// Command to execute
+! 		    NULL,			// Process security attributes
+! 		    NULL,			// Thread security attributes
+! 		    FALSE,			// Inherit handles
+! 		    flags,			// Creation flags
+! 		    NULL,			// Environment
+! 		    NULL,			// Current directory
+! 		    &si,			// Startup information
+! 		    &pi))			// Process information
+! 		x = 0;
+! 	    else
+! 	    {
+! 		x = -1;
+  #ifdef FEAT_GUI_W32
+! 		EMSG(_("E371: Command not found"));
+  #endif
+  	    }
+! 	    if (si.hStdInput != NULL)
+! 	    {
+! 		/* Close the handle to \\.\NUL */
+! 		CloseHandle(si.hStdInput);
+! 	    }
+! 	    /* Close the handles to the subprocess, so that it goes away */
+! 	    CloseHandle(pi.hThread);
+! 	    CloseHandle(pi.hProcess);
+! 	}
+! 	else
+! 	{
+! 	    char_u *newcmd;
+! 	    long_u cmdlen =  (
+! #ifdef FEAT_GUI_W32
+! 		(allowPiping && !p_stmp ? 0 : STRLEN(vimrun_path)) +
+! #endif
+! 		STRLEN(p_sh) + STRLEN(p_shcf) + STRLEN(cmd) + 10);
+! 
+! 	    newcmd = lalloc(cmdlen, TRUE);
+! 	    if (newcmd != NULL)
+  	    {
+  #if defined(FEAT_GUI_W32)
+  		if (need_vimrun_warning)
+***************
+*** 4038,4045 ****
+  		    vim_snprintf((char *)newcmd, cmdlen, "%s %s %s",
+  							   p_sh, p_shcf, cmd);
+  		x = mch_system((char *)newcmd, options);
+  	    }
+- 	    vim_free(newcmd);
+  	}
+      }
+  
+--- 4068,4075 ----
+  		    vim_snprintf((char *)newcmd, cmdlen, "%s %s %s",
+  							   p_sh, p_shcf, cmd);
+  		x = mch_system((char *)newcmd, options);
++ 		vim_free(newcmd);
+  	    }
+  	}
+      }
+  
+*** ../vim-7.3.446/src/version.c	2012-02-20 22:18:23.000000000 +0100
+--- src/version.c	2012-02-21 21:20:05.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     447,
+  /**/
+
+-- 
+From "know your smileys":
+ :----}  You lie like Pinocchio
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.448 b/source/ap/vim/patches/7.3.448
new file mode 100644
index 00000000..91d8f26e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.448
@@ -0,0 +1,180 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.448
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.448 (after 7.3.447)
+Problem:    Win32: Still a problem with "!start /b".
+Solution:   Escape only '|'. (Yasuhiro Matsumoto)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.447/src/os_win32.c	2012-02-21 21:22:40.000000000 +0100
+--- src/os_win32.c	2012-02-22 13:06:55.000000000 +0100
+***************
+*** 3933,3939 ****
+      else
+      {
+  	/* we use "command" or "cmd" to start the shell; slow but easy */
+! 	char_u *cmdbase = cmd;
+  
+  	/* Skip a leading ", ( and "(. */
+  	if (*cmdbase == '"' )
+--- 3933,3941 ----
+      else
+      {
+  	/* we use "command" or "cmd" to start the shell; slow but easy */
+! 	char_u	*newcmd = NULL;
+! 	char_u	*cmdbase = cmd;
+! 	long_u	cmdlen;
+  
+  	/* Skip a leading ", ( and "(. */
+  	if (*cmdbase == '"' )
+***************
+*** 3971,3982 ****
+  		flags = CREATE_NO_WINDOW;
+  		si.dwFlags = STARTF_USESTDHANDLES;
+  		si.hStdInput = CreateFile("\\\\.\\NUL",	// File name
+! 		    GENERIC_READ,				// Access flags
+  		    0,					// Share flags
+! 		    NULL,					// Security att.
+! 		    OPEN_EXISTING,				// Open flags
+! 		    FILE_ATTRIBUTE_NORMAL,			// File att.
+! 		    NULL);					// Temp file
+  		si.hStdOutput = si.hStdInput;
+  		si.hStdError = si.hStdInput;
+  	    }
+--- 3973,3984 ----
+  		flags = CREATE_NO_WINDOW;
+  		si.dwFlags = STARTF_USESTDHANDLES;
+  		si.hStdInput = CreateFile("\\\\.\\NUL",	// File name
+! 		    GENERIC_READ,			// Access flags
+  		    0,					// Share flags
+! 		    NULL,				// Security att.
+! 		    OPEN_EXISTING,			// Open flags
+! 		    FILE_ATTRIBUTE_NORMAL,		// File att.
+! 		    NULL);				// Temp file
+  		si.hStdOutput = si.hStdInput;
+  		si.hStdError = si.hStdInput;
+  	    }
+***************
+*** 3993,4004 ****
+  		    *--p = NUL;
+  	    }
+  
+  	    /*
+! 	     * Unescape characters in shellxescape. This is workaround for
+! 	     * /b option. Only redirect character should be unescaped.
+  	     */
+! 	    unescape_shellxquote(cmdbase,
+! 			(flags & CREATE_NEW_CONSOLE) ? p_sxe : "<>");
+  
+  	    /*
+  	     * Now, start the command as a process, so that it doesn't
+--- 3995,4030 ----
+  		    *--p = NUL;
+  	    }
+  
++ 	    newcmd = cmdbase;
++ 	    unescape_shellxquote(cmdbase, p_sxe);
++ 
+  	    /*
+! 	     * If creating new console, arguments are passed to the
+! 	     * 'cmd.exe' as-is. If it's not, arguments are not treated
+! 	     * correctly for current 'cmd.exe'. So unescape characters in
+! 	     * shellxescape except '|' for avoiding to be treated as
+! 	     * argument to them. Pass the arguments to sub-shell.
+  	     */
+! 	    if (flags != CREATE_NEW_CONSOLE)
+! 	    {
+! 		char_u	*subcmd;
+! 		char_u	*cmd_shell = default_shell();
+! 
+! 		subcmd = vim_strsave_escaped_ext(cmdbase, "|", '^', FALSE);
+! 		if (subcmd != NULL)
+! 		{
+! 		    /* make "cmd.exe /c arguments" */
+! 		    cmdlen = STRLEN(cmd_shell) + STRLEN(subcmd) + 5;
+! 		    vim_free(subcmd);
+! 
+! 		    newcmd = lalloc(cmdlen, TRUE);
+! 		    if (newcmd != NULL)
+! 			vim_snprintf((char *)newcmd, cmdlen, "%s /c %s",
+! 						       default_shell, subcmd);
+! 		    else
+! 			newcmd = cmdbase;
+! 		}
+! 	    }
+  
+  	    /*
+  	     * Now, start the command as a process, so that it doesn't
+***************
+*** 4006,4012 ****
+  	     * files if we exit before the spawned process
+  	     */
+  	    if (CreateProcess(NULL,		// Executable name
+! 		    cmdbase,			// Command to execute
+  		    NULL,			// Process security attributes
+  		    NULL,			// Thread security attributes
+  		    FALSE,			// Inherit handles
+--- 4032,4038 ----
+  	     * files if we exit before the spawned process
+  	     */
+  	    if (CreateProcess(NULL,		// Executable name
+! 		    newcmd,			// Command to execute
+  		    NULL,			// Process security attributes
+  		    NULL,			// Thread security attributes
+  		    FALSE,			// Inherit handles
+***************
+*** 4023,4028 ****
+--- 4049,4058 ----
+  		EMSG(_("E371: Command not found"));
+  #endif
+  	    }
++ 
++ 	    if (newcmd != cmdbase)
++ 		vim_free(newcmd);
++ 
+  	    if (si.hStdInput != NULL)
+  	    {
+  		/* Close the handle to \\.\NUL */
+***************
+*** 4034,4041 ****
+  	}
+  	else
+  	{
+! 	    char_u *newcmd;
+! 	    long_u cmdlen =  (
+  #ifdef FEAT_GUI_W32
+  		(allowPiping && !p_stmp ? 0 : STRLEN(vimrun_path)) +
+  #endif
+--- 4064,4070 ----
+  	}
+  	else
+  	{
+! 	    cmdlen = (
+  #ifdef FEAT_GUI_W32
+  		(allowPiping && !p_stmp ? 0 : STRLEN(vimrun_path)) +
+  #endif
+*** ../vim-7.3.447/src/version.c	2012-02-21 21:22:40.000000000 +0100
+--- src/version.c	2012-02-22 13:02:15.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     448,
+  /**/
+
+-- 
+From "know your smileys":
+ ~#:-(	I just washed my hair, and I can't do nuthin' with it.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.449 b/source/ap/vim/patches/7.3.449
new file mode 100644
index 00000000..9b5bdea8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.449
@@ -0,0 +1,455 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.449
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.449
+Problem:    Crash when a BufWinLeave autocommand closes the only other window.
+	    (Daniel Hunt)
+Solution:   Abort closing a buffer when it becomes the only one.
+Files:	    src/buffer.c, src/proto/buffer.pro, src/ex_cmds.c, src/ex_getln.c,
+	    src/misc2.c, src/quickfix.c, src/window.c, src/proto/window.pro
+
+
+*** ../vim-7.3.448/src/buffer.c	2012-01-20 20:44:38.000000000 +0100
+--- src/buffer.c	2012-02-22 14:50:42.000000000 +0100
+***************
+*** 64,69 ****
+--- 64,72 ----
+  static char *msg_loclist = N_("[Location List]");
+  static char *msg_qflist = N_("[Quickfix List]");
+  #endif
++ #ifdef FEAT_AUTOCMD
++ static char *e_auabort = N_("E855: Autocommands caused command to abort");
++ #endif
+  
+  /*
+   * Open current buffer, that is: open the memfile and read the file into
+***************
+*** 96,102 ****
+  	 * There MUST be a memfile, otherwise we can't do anything
+  	 * If we can't create one for the current buffer, take another buffer
+  	 */
+! 	close_buffer(NULL, curbuf, 0);
+  	for (curbuf = firstbuf; curbuf != NULL; curbuf = curbuf->b_next)
+  	    if (curbuf->b_ml.ml_mfp != NULL)
+  		break;
+--- 99,105 ----
+  	 * There MUST be a memfile, otherwise we can't do anything
+  	 * If we can't create one for the current buffer, take another buffer
+  	 */
+! 	close_buffer(NULL, curbuf, 0, FALSE);
+  	for (curbuf = firstbuf; curbuf != NULL; curbuf = curbuf->b_next)
+  	    if (curbuf->b_ml.ml_mfp != NULL)
+  		break;
+***************
+*** 316,327 ****
+   * get a new buffer very soon!
+   *
+   * The 'bufhidden' option can force freeing and deleting.
+   */
+      void
+! close_buffer(win, buf, action)
+      win_T	*win;		/* if not NULL, set b_last_cursor */
+      buf_T	*buf;
+      int		action;
+  {
+  #ifdef FEAT_AUTOCMD
+      int		is_curbuf;
+--- 319,335 ----
+   * get a new buffer very soon!
+   *
+   * The 'bufhidden' option can force freeing and deleting.
++  *
++  * When "abort_if_last" is TRUE then do not close the buffer if autocommands
++  * cause there to be only one window with this buffer.  e.g. when ":quit" is
++  * supposed to close the window but autocommands close all other windows.
+   */
+      void
+! close_buffer(win, buf, action, abort_if_last)
+      win_T	*win;		/* if not NULL, set b_last_cursor */
+      buf_T	*buf;
+      int		action;
++     int		abort_if_last;
+  {
+  #ifdef FEAT_AUTOCMD
+      int		is_curbuf;
+***************
+*** 371,378 ****
+      {
+  	apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	if (!buf_valid(buf))	    /* autocommands may delete the buffer */
+  	    return;
+  
+  	/* When the buffer becomes hidden, but is not unloaded, trigger
+  	 * BufHidden */
+--- 379,390 ----
+      {
+  	apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	/* Return if autocommands deleted the buffer or made it the only one. */
+! 	if (!buf_valid(buf) || (abort_if_last && one_window()))
+! 	{
+! 	    EMSG(_(e_auabort));
+  	    return;
++ 	}
+  
+  	/* When the buffer becomes hidden, but is not unloaded, trigger
+  	 * BufHidden */
+***************
+*** 380,387 ****
+  	{
+  	    apply_autocmds(EVENT_BUFHIDDEN, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	    if (!buf_valid(buf))	/* autocmds may delete the buffer */
+  		return;
+  	}
+  # ifdef FEAT_EVAL
+  	if (aborting())	    /* autocmds may abort script processing */
+--- 392,404 ----
+  	{
+  	    apply_autocmds(EVENT_BUFHIDDEN, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	    /* Return if autocommands deleted the buffer or made it the only
+! 	     * one. */
+! 	    if (!buf_valid(buf) || (abort_if_last && one_window()))
+! 	    {
+! 		EMSG(_(e_auabort));
+  		return;
++ 	    }
+  	}
+  # ifdef FEAT_EVAL
+  	if (aborting())	    /* autocmds may abort script processing */
+***************
+*** 775,781 ****
+  	 * open a new, empty buffer. */
+  	swap_exists_action = SEA_NONE;	/* don't want it again */
+  	swap_exists_did_quit = TRUE;
+! 	close_buffer(curwin, curbuf, DOBUF_UNLOAD);
+  	if (!buf_valid(old_curbuf) || old_curbuf == curbuf)
+  	    old_curbuf = buflist_new(NULL, NULL, 1L, BLN_CURBUF | BLN_LISTED);
+  	if (old_curbuf != NULL)
+--- 792,798 ----
+  	 * open a new, empty buffer. */
+  	swap_exists_action = SEA_NONE;	/* don't want it again */
+  	swap_exists_did_quit = TRUE;
+! 	close_buffer(curwin, curbuf, DOBUF_UNLOAD, FALSE);
+  	if (!buf_valid(old_curbuf) || old_curbuf == curbuf)
+  	    old_curbuf = buflist_new(NULL, NULL, 1L, BLN_CURBUF | BLN_LISTED);
+  	if (old_curbuf != NULL)
+***************
+*** 1122,1128 ****
+  	     * if the buffer still exists.
+  	     */
+  	    if (buf != curbuf && buf_valid(buf) && buf->b_nwindows == 0)
+! 		close_buffer(NULL, buf, action);
+  	    return retval;
+  	}
+  
+--- 1139,1145 ----
+  	     * if the buffer still exists.
+  	     */
+  	    if (buf != curbuf && buf_valid(buf) && buf->b_nwindows == 0)
+! 		close_buffer(NULL, buf, action, FALSE);
+  	    return retval;
+  	}
+  
+***************
+*** 1146,1152 ****
+  	    close_windows(buf, FALSE);
+  #endif
+  	    if (buf != curbuf && buf_valid(buf) && buf->b_nwindows <= 0)
+! 		close_buffer(NULL, buf, action);
+  	    return OK;
+  	}
+  
+--- 1163,1169 ----
+  	    close_windows(buf, FALSE);
+  #endif
+  	    if (buf != curbuf && buf_valid(buf) && buf->b_nwindows <= 0)
+! 		close_buffer(NULL, buf, action, FALSE);
+  	    return OK;
+  	}
+  
+***************
+*** 1378,1384 ****
+  	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
+  		    unload ? action : (action == DOBUF_GOTO
+  			&& !P_HID(prevbuf)
+! 			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0);
+  	}
+      }
+  #ifdef FEAT_AUTOCMD
+--- 1395,1401 ----
+  	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
+  		    unload ? action : (action == DOBUF_GOTO
+  			&& !P_HID(prevbuf)
+! 			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
+  	}
+      }
+  #ifdef FEAT_AUTOCMD
+***************
+*** 2708,2714 ****
+  		vim_free(ffname);
+  		return FAIL;
+  	    }
+! 	    close_buffer(NULL, obuf, DOBUF_WIPE); /* delete from the list */
+  	}
+  	sfname = vim_strsave(sfname);
+  	if (ffname == NULL || sfname == NULL)
+--- 2725,2732 ----
+  		vim_free(ffname);
+  		return FAIL;
+  	    }
+! 	    /* delete from the list */
+! 	    close_buffer(NULL, obuf, DOBUF_WIPE, FALSE);
+  	}
+  	sfname = vim_strsave(sfname);
+  	if (ffname == NULL || sfname == NULL)
+***************
+*** 5638,5644 ****
+      if (!aucmd)		    /* Don't trigger BufDelete autocommands here. */
+  	block_autocmds();
+  #endif
+!     close_buffer(NULL, buf, DOBUF_WIPE);
+  #ifdef FEAT_AUTOCMD
+      if (!aucmd)
+  	unblock_autocmds();
+--- 5656,5662 ----
+      if (!aucmd)		    /* Don't trigger BufDelete autocommands here. */
+  	block_autocmds();
+  #endif
+!     close_buffer(NULL, buf, DOBUF_WIPE, FALSE);
+  #ifdef FEAT_AUTOCMD
+      if (!aucmd)
+  	unblock_autocmds();
+*** ../vim-7.3.448/src/proto/buffer.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/buffer.pro	2012-02-22 14:04:26.000000000 +0100
+***************
+*** 1,7 ****
+  /* buffer.c */
+  int open_buffer __ARGS((int read_stdin, exarg_T *eap, int flags));
+  int buf_valid __ARGS((buf_T *buf));
+! void close_buffer __ARGS((win_T *win, buf_T *buf, int action));
+  void buf_clear_file __ARGS((buf_T *buf));
+  void buf_freeall __ARGS((buf_T *buf, int flags));
+  void goto_buffer __ARGS((exarg_T *eap, int start, int dir, int count));
+--- 1,7 ----
+  /* buffer.c */
+  int open_buffer __ARGS((int read_stdin, exarg_T *eap, int flags));
+  int buf_valid __ARGS((buf_T *buf));
+! void close_buffer __ARGS((win_T *win, buf_T *buf, int action, int abort_if_last));
+  void buf_clear_file __ARGS((buf_T *buf));
+  void buf_freeall __ARGS((buf_T *buf, int flags));
+  void goto_buffer __ARGS((exarg_T *eap, int start, int dir, int count));
+*** ../vim-7.3.448/src/ex_cmds.c	2011-12-30 15:01:55.000000000 +0100
+--- src/ex_cmds.c	2012-02-22 14:00:32.000000000 +0100
+***************
+*** 3387,3393 ****
+  		/* close the link to the current buffer */
+  		u_sync(FALSE);
+  		close_buffer(oldwin, curbuf,
+! 				      (flags & ECMD_HIDE) ? 0 : DOBUF_UNLOAD);
+  
+  #ifdef FEAT_AUTOCMD
+  		/* Autocommands may open a new window and leave oldwin open
+--- 3387,3393 ----
+  		/* close the link to the current buffer */
+  		u_sync(FALSE);
+  		close_buffer(oldwin, curbuf,
+! 			       (flags & ECMD_HIDE) ? 0 : DOBUF_UNLOAD, FALSE);
+  
+  #ifdef FEAT_AUTOCMD
+  		/* Autocommands may open a new window and leave oldwin open
+*** ../vim-7.3.448/src/ex_getln.c	2012-02-04 22:44:27.000000000 +0100
+--- src/ex_getln.c	2012-02-22 14:01:56.000000000 +0100
+***************
+*** 6443,6449 ****
+  	/* win_close() may have already wiped the buffer when 'bh' is
+  	 * set to 'wipe' */
+  	if (buf_valid(bp))
+! 	    close_buffer(NULL, bp, DOBUF_WIPE);
+  
+  	/* Restore window sizes. */
+  	win_size_restore(&winsizes);
+--- 6443,6449 ----
+  	/* win_close() may have already wiped the buffer when 'bh' is
+  	 * set to 'wipe' */
+  	if (buf_valid(bp))
+! 	    close_buffer(NULL, bp, DOBUF_WIPE, FALSE);
+  
+  	/* Restore window sizes. */
+  	win_size_restore(&winsizes);
+*** ../vim-7.3.448/src/misc2.c	2012-02-20 22:18:22.000000000 +0100
+--- src/misc2.c	2012-02-22 14:02:12.000000000 +0100
+***************
+*** 1173,1179 ****
+      for (buf = firstbuf; buf != NULL; )
+      {
+  	nextbuf = buf->b_next;
+! 	close_buffer(NULL, buf, DOBUF_WIPE);
+  	if (buf_valid(buf))
+  	    buf = nextbuf;	/* didn't work, try next one */
+  	else
+--- 1173,1179 ----
+      for (buf = firstbuf; buf != NULL; )
+      {
+  	nextbuf = buf->b_next;
+! 	close_buffer(NULL, buf, DOBUF_WIPE, FALSE);
+  	if (buf_valid(buf))
+  	    buf = nextbuf;	/* didn't work, try next one */
+  	else
+*** ../vim-7.3.448/src/quickfix.c	2012-01-20 13:39:03.000000000 +0100
+--- src/quickfix.c	2012-02-22 14:02:20.000000000 +0100
+***************
+*** 3565,3571 ****
+      buf_T	*buf;
+  {
+      if (curbuf != buf)		/* safety check */
+! 	close_buffer(NULL, buf, DOBUF_UNLOAD);
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+--- 3565,3571 ----
+      buf_T	*buf;
+  {
+      if (curbuf != buf)		/* safety check */
+! 	close_buffer(NULL, buf, DOBUF_UNLOAD, FALSE);
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+*** ../vim-7.3.448/src/window.c	2012-01-10 22:26:12.000000000 +0100
+--- src/window.c	2012-02-22 14:08:13.000000000 +0100
+***************
+*** 23,29 ****
+  static void win_totop __ARGS((int size, int flags));
+  static void win_equal_rec __ARGS((win_T *next_curwin, int current, frame_T *topfr, int dir, int col, int row, int width, int height));
+  static int last_window __ARGS((void));
+- static int one_window __ARGS((void));
+  static win_T *win_free_mem __ARGS((win_T *win, int *dirp, tabpage_T *tp));
+  static frame_T *win_altframe __ARGS((win_T *win, tabpage_T *tp));
+  static tabpage_T *alt_tabpage __ARGS((void));
+--- 23,28 ----
+***************
+*** 2083,2089 ****
+   * Return TRUE if there is only one window other than "aucmd_win" in the
+   * current tab page.
+   */
+!     static int
+  one_window()
+  {
+  #ifdef FEAT_AUTOCMD
+--- 2082,2088 ----
+   * Return TRUE if there is only one window other than "aucmd_win" in the
+   * current tab page.
+   */
+!     int
+  one_window()
+  {
+  #ifdef FEAT_AUTOCMD
+***************
+*** 2109,2115 ****
+   * Close window "win".  Only works for the current tab page.
+   * If "free_buf" is TRUE related buffer may be unloaded.
+   *
+!  * called by :quit, :close, :xit, :wq and findtag()
+   */
+      void
+  win_close(win, free_buf)
+--- 2108,2114 ----
+   * Close window "win".  Only works for the current tab page.
+   * If "free_buf" is TRUE related buffer may be unloaded.
+   *
+!  * Called by :quit, :close, :xit, :wq and findtag().
+   */
+      void
+  win_close(win, free_buf)
+***************
+*** 2222,2228 ****
+       * Close the link to the buffer.
+       */
+      if (win->w_buffer != NULL)
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0);
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+--- 2221,2227 ----
+       * Close the link to the buffer.
+       */
+      if (win->w_buffer != NULL)
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, TRUE);
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+***************
+*** 2328,2334 ****
+      int		free_tp = FALSE;
+  
+      /* Close the link to the buffer. */
+!     close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0);
+  
+      /* Careful: Autocommands may have closed the tab page or made it the
+       * current tab page.  */
+--- 2327,2333 ----
+      int		free_tp = FALSE;
+  
+      /* Close the link to the buffer. */
+!     close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, FALSE);
+  
+      /* Careful: Autocommands may have closed the tab page or made it the
+       * current tab page.  */
+*** ../vim-7.3.448/src/proto/window.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/window.pro	2012-02-22 14:08:28.000000000 +0100
+***************
+*** 1,13 ****
+  /* window.c */
+  void do_window __ARGS((int nchar, long Prenum, int xchar));
+  int win_split __ARGS((int size, int flags));
+! int win_split_ins __ARGS((int size, int flags, win_T *newwin, int dir));
+  int win_valid __ARGS((win_T *win));
+  int win_count __ARGS((void));
+  int make_windows __ARGS((int count, int vertical));
+  void win_move_after __ARGS((win_T *win1, win_T *win2));
+  void win_equal __ARGS((win_T *next_curwin, int current, int dir));
+  void close_windows __ARGS((buf_T *buf, int keep_curwin));
+  void win_close __ARGS((win_T *win, int free_buf));
+  void win_close_othertab __ARGS((win_T *win, int free_buf, tabpage_T *tp));
+  void win_free_all __ARGS((void));
+--- 1,14 ----
+  /* window.c */
+  void do_window __ARGS((int nchar, long Prenum, int xchar));
+  int win_split __ARGS((int size, int flags));
+! int win_split_ins __ARGS((int size, int flags, win_T *new_wp, int dir));
+  int win_valid __ARGS((win_T *win));
+  int win_count __ARGS((void));
+  int make_windows __ARGS((int count, int vertical));
+  void win_move_after __ARGS((win_T *win1, win_T *win2));
+  void win_equal __ARGS((win_T *next_curwin, int current, int dir));
+  void close_windows __ARGS((buf_T *buf, int keep_curwin));
++ int one_window __ARGS((void));
+  void win_close __ARGS((win_T *win, int free_buf));
+  void win_close_othertab __ARGS((win_T *win, int free_buf, tabpage_T *tp));
+  void win_free_all __ARGS((void));
+*** ../vim-7.3.448/src/version.c	2012-02-22 13:07:02.000000000 +0100
+--- src/version.c	2012-02-22 14:55:21.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     449,
+  /**/
+
+-- 
+From "know your smileys":
+ :-)-O	Smiling doctor with stethoscope
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.450 b/source/ap/vim/patches/7.3.450
new file mode 100644
index 00000000..7112668f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.450
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.450
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.450 (after 7.3.448)
+Problem:    Win32: Still a problem with "!start /b".
+Solution:   Fix pointer use. (Yasuhiro Matsumoto)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.449/src/os_win32.c	2012-02-22 13:07:02.000000000 +0100
+--- src/os_win32.c	2012-02-22 15:29:56.000000000 +0100
+***************
+*** 4008,4028 ****
+  	    if (flags != CREATE_NEW_CONSOLE)
+  	    {
+  		char_u	*subcmd;
+! 		char_u	*cmd_shell = default_shell();
+  
+  		subcmd = vim_strsave_escaped_ext(cmdbase, "|", '^', FALSE);
+  		if (subcmd != NULL)
+  		{
+  		    /* make "cmd.exe /c arguments" */
+  		    cmdlen = STRLEN(cmd_shell) + STRLEN(subcmd) + 5;
+- 		    vim_free(subcmd);
+- 
+  		    newcmd = lalloc(cmdlen, TRUE);
+  		    if (newcmd != NULL)
+  			vim_snprintf((char *)newcmd, cmdlen, "%s /c %s",
+! 						       default_shell, subcmd);
+  		    else
+  			newcmd = cmdbase;
+  		}
+  	    }
+  
+--- 4008,4030 ----
+  	    if (flags != CREATE_NEW_CONSOLE)
+  	    {
+  		char_u	*subcmd;
+! 		char_u	*cmd_shell = mch_getenv("COMSPEC");
+! 
+! 		if (cmd_shell == NULL || *cmd_shell == NUL)
+! 		    cmd_shell = default_shell();
+  
+  		subcmd = vim_strsave_escaped_ext(cmdbase, "|", '^', FALSE);
+  		if (subcmd != NULL)
+  		{
+  		    /* make "cmd.exe /c arguments" */
+  		    cmdlen = STRLEN(cmd_shell) + STRLEN(subcmd) + 5;
+  		    newcmd = lalloc(cmdlen, TRUE);
+  		    if (newcmd != NULL)
+  			vim_snprintf((char *)newcmd, cmdlen, "%s /c %s",
+! 						       cmd_shell, subcmd);
+  		    else
+  			newcmd = cmdbase;
++ 		    vim_free(subcmd);
+  		}
+  	    }
+  
+*** ../vim-7.3.449/src/version.c	2012-02-22 14:58:24.000000000 +0100
+--- src/version.c	2012-02-22 15:33:53.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     450,
+  /**/
+
+-- 
+You are only young once, but you can stay immature indefinitely.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.451 b/source/ap/vim/patches/7.3.451
new file mode 100644
index 00000000..25d1b046
--- /dev/null
+++ b/source/ap/vim/patches/7.3.451
@@ -0,0 +1,363 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.451
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.451
+Problem:    Tcl doesn't work on 64 bit MS-Windows.
+Solution:   Make it work. (Dave Bodenstab)
+Files:	    src/Make_mvc.mak, src/if_tcl.c
+
+
+*** ../vim-7.3.450/src/Make_mvc.mak	2012-02-12 01:55:50.000000000 +0100
+--- src/Make_mvc.mak	2012-02-22 15:43:01.000000000 +0100
+***************
+*** 616,622 ****
+  		-DDYNAMIC_TCL_VER=\"$(TCL_VER_LONG)\"
+  TCL_OBJ	= $(OUTDIR)\if_tcl.obj
+  TCL_INC	= /I "$(TCL)\Include" /I "$(TCL)"
+! TCL_LIB = $(TCL)\lib\tclstub$(TCL_VER).lib
+  !else
+  CFLAGS  = $(CFLAGS) -DFEAT_TCL
+  TCL_OBJ	= $(OUTDIR)\if_tcl.obj
+--- 616,622 ----
+  		-DDYNAMIC_TCL_VER=\"$(TCL_VER_LONG)\"
+  TCL_OBJ	= $(OUTDIR)\if_tcl.obj
+  TCL_INC	= /I "$(TCL)\Include" /I "$(TCL)"
+! TCL_LIB = "$(TCL)\lib\tclstub$(TCL_VER).lib"
+  !else
+  CFLAGS  = $(CFLAGS) -DFEAT_TCL
+  TCL_OBJ	= $(OUTDIR)\if_tcl.obj
+*** ../vim-7.3.450/src/if_tcl.c	2011-07-27 14:15:41.000000000 +0200
+--- src/if_tcl.c	2012-02-22 15:47:00.000000000 +0100
+***************
+*** 79,90 ****
+  typedef struct
+  {
+      Tcl_Interp *interp;
+      int range_start, range_end;
+      int lbase;
+      char *curbuf, *curwin;
+  } tcl_info;
+  
+! static tcl_info tclinfo = { NULL, 0, 0, 0, NULL, NULL };
+  
+  #define VAR_RANGE1	"::vim::range(start)"
+  #define VAR_RANGE2	"::vim::range(begin)"
+--- 79,91 ----
+  typedef struct
+  {
+      Tcl_Interp *interp;
++     int exitvalue;
+      int range_start, range_end;
+      int lbase;
+      char *curbuf, *curwin;
+  } tcl_info;
+  
+! static tcl_info tclinfo = { NULL, 0, 0, 0, 0, NULL, NULL };
+  
+  #define VAR_RANGE1	"::vim::range(start)"
+  #define VAR_RANGE2	"::vim::range(begin)"
+***************
+*** 279,294 ****
+   ****************************************************************************/
+  
+  /*
+!  * Replace standard "exit" and "catch" commands.
+   *
+!  * This is a design flaw in Tcl -  the standard "exit" command just calls
+!  * exit() and kills the application.  It should return TCL_EXIT to the
+!  * app, which then decides if it wants to terminate or not.  In our case,
+!  * we just delete the Tcl interpreter (and create a new one with the next
+!  * :tcl command).
+   */
+- #define TCL_EXIT	5
+- 
+      static int
+  exitcmd(dummy, interp, objc, objv)
+      ClientData dummy UNUSED;
+--- 280,298 ----
+   ****************************************************************************/
+  
+  /*
+!  * Replace standard "exit" command.
+   *
+!  * Delete the Tcl interpreter; a new one will be created with the next
+!  * :tcl command). The exit code is saved (and retrieved in tclexit()).
+!  * Since Tcl's exit is never expected to return and this replacement
+!  * does, then (except for a trivial case) additional Tcl commands will
+!  * be run. Since the interpreter is now marked as deleted, an error
+!  * will be returned -- typically "attempt to call eval in deleted
+!  * interpreter". Hopefully, at this point, checks for TCL_ERROR take
+!  * place and control percolates back up to Vim -- but with this new error
+!  * string in the interpreter's result value. Therefore it would be
+!  * useless for this routine to return the exit code via Tcl_SetResult().
+   */
+      static int
+  exitcmd(dummy, interp, objc, objv)
+      ClientData dummy UNUSED;
+***************
+*** 305,351 ****
+  		break;
+  	    /* FALLTHROUGH */
+  	case 1:
+! 	    Tcl_SetObjResult(interp, Tcl_NewIntObj(value));
+! 	    return TCL_EXIT;
+! 	default:
+! 	    Tcl_WrongNumArgs(interp, 1, objv, "?returnCode?");
+!     }
+!     return TCL_ERROR;
+! }
+  
+!     static int
+! catchcmd(dummy, interp, objc, objv)
+!     ClientData	dummy UNUSED;
+!     Tcl_Interp	*interp;
+!     int		objc;
+!     Tcl_Obj	*CONST objv[];
+! {
+!     char    *varname = NULL;
+!     int	    result;
+! 
+!     switch (objc)
+!     {
+! 	case 3:
+! 	    varname = Tcl_GetStringFromObj(objv[2], NULL);
+! 	    /* fallthrough */
+! 	case 2:
+! 	    Tcl_ResetResult(interp);
+! 	    Tcl_AllowExceptions(interp);
+! 	    result = Tcl_EvalObj(interp, objv[1]);
+! 	    if (result == TCL_EXIT)
+! 		return result;
+! 	    if (varname)
+! 	    {
+! 		if (Tcl_SetVar(interp, varname, Tcl_GetStringResult(interp), 0) == NULL)
+! 		{
+! 		    Tcl_SetResult(interp, "couldn't save command result in variable", TCL_STATIC);
+! 		    return TCL_ERROR;
+! 		}
+! 	    }
+! 	    Tcl_SetObjResult(interp, Tcl_NewIntObj(result));
+! 	    return TCL_OK;
+  	default:
+! 	    Tcl_WrongNumArgs(interp, 1, objv, "command ?varName?");
+      }
+      return TCL_ERROR;
+  }
+--- 309,320 ----
+  		break;
+  	    /* FALLTHROUGH */
+  	case 1:
+! 	    tclinfo.exitvalue = value;
+  
+! 	    Tcl_DeleteInterp(interp);
+! 	    break;
+  	default:
+! 	    Tcl_WrongNumArgs(interp, 1, objv, "?returnCode?");
+      }
+      return TCL_ERROR;
+  }
+***************
+*** 372,377 ****
+--- 341,347 ----
+  /*
+   *  "::vim::buffer list" - create a list of buffer commands.
+   *  "::vim::buffer {N}" - create buffer command for buffer N.
++  *  "::vim::buffer exists {N}" - test if buffer N exists.
+   *  "::vim::buffer new" - create a new buffer (not implemented)
+   */
+      static int
+***************
+*** 1663,1669 ****
+  static Tcl_ChannelType channel_type =
+  {
+      "vimmessage",	/* typeName */
+!     NULL,		/* version */
+      channel_close,	/* closeProc */
+      channel_input,	/* inputProc */
+      channel_output,	/* outputProc */
+--- 1633,1639 ----
+  static Tcl_ChannelType channel_type =
+  {
+      "vimmessage",	/* typeName */
+!     TCL_CHANNEL_VERSION_2, /* version */
+      channel_close,	/* closeProc */
+      channel_input,	/* inputProc */
+      channel_output,	/* outputProc */
+***************
+*** 1678,1683 ****
+--- 1648,1655 ----
+      NULL,		/* flushProc */
+      NULL,		/* handlerProc */
+  #endif
++ /* The following should not be necessary since TCL_CHANNEL_VERSION_2 was
++  * set above */
+  #ifdef TCL_CHANNEL_VERSION_3
+      NULL,		/* wideSeekProc */
+  #endif
+***************
+*** 1741,1747 ****
+  	Tcl_Interp *interp;
+  	static Tcl_Channel ch1, ch2;
+  
+! 	/* replace stdout and stderr */
+  	ch1 = Tcl_CreateChannel(&channel_type, "vimout", VIMOUT, TCL_WRITABLE);
+  	ch2 = Tcl_CreateChannel(&channel_type, "vimerr", VIMERR, TCL_WRITABLE);
+  	Tcl_SetStdChannel(ch1, TCL_STDOUT);
+--- 1713,1721 ----
+  	Tcl_Interp *interp;
+  	static Tcl_Channel ch1, ch2;
+  
+! 	/* Create replacement channels for stdout and stderr; this has to be
+! 	 * done each time an interpreter is created since the channels are closed
+! 	 * when the interpreter is deleted */
+  	ch1 = Tcl_CreateChannel(&channel_type, "vimout", VIMOUT, TCL_WRITABLE);
+  	ch2 = Tcl_CreateChannel(&channel_type, "vimerr", VIMERR, TCL_WRITABLE);
+  	Tcl_SetStdChannel(ch1, TCL_STDOUT);
+***************
+*** 1761,1775 ****
+  #endif
+  
+  	Tcl_SetChannelOption(interp, ch1, "-buffering", "line");
+  	Tcl_SetChannelOption(interp, ch2, "-buffering", "line");
+  
+! 	/* replace some standard Tcl commands */
+  	Tcl_DeleteCommand(interp, "exit");
+  	Tcl_CreateObjCommand(interp, "exit", exitcmd,
+  	    (ClientData)NULL, (Tcl_CmdDeleteProc *)NULL);
+- 	Tcl_DeleteCommand(interp, "catch");
+- 	Tcl_CreateObjCommand(interp, "catch", catchcmd,
+- 	    (ClientData)NULL, (Tcl_CmdDeleteProc *)NULL);
+  
+  	/* new commands, in ::vim namespace */
+  	Tcl_CreateObjCommand(interp, "::vim::buffer", buffercmd,
+--- 1735,1752 ----
+  #endif
+  
+  	Tcl_SetChannelOption(interp, ch1, "-buffering", "line");
++ #ifdef WIN3264
++ 	Tcl_SetChannelOption(interp, ch1, "-translation", "lf");
++ #endif
+  	Tcl_SetChannelOption(interp, ch2, "-buffering", "line");
++ #ifdef WIN3264
++ 	Tcl_SetChannelOption(interp, ch2, "-translation", "lf");
++ #endif
+  
+! 	/* replace standard Tcl exit command */
+  	Tcl_DeleteCommand(interp, "exit");
+  	Tcl_CreateObjCommand(interp, "exit", exitcmd,
+  	    (ClientData)NULL, (Tcl_CmdDeleteProc *)NULL);
+  
+  	/* new commands, in ::vim namespace */
+  	Tcl_CreateObjCommand(interp, "::vim::buffer", buffercmd,
+***************
+*** 1821,1826 ****
+--- 1798,1805 ----
+  	tclinfo.range_end = row2tcl(eap->line2);
+  	tclupdatevars();
+      }
++ 
++     tclinfo.exitvalue = 0;
+      return OK;
+  }
+  
+***************
+*** 1884,1913 ****
+  {
+      int newerr = OK;
+  
+!     if (error == TCL_EXIT)
+      {
+- 	int retval;
+  	char buf[50];
+- 	Tcl_Obj *robj;
+  
+! 	robj = Tcl_GetObjResult(tclinfo.interp);
+! 	if (Tcl_GetIntFromObj(tclinfo.interp, robj, &retval) != TCL_OK)
+  	{
+! 	    EMSG(_("E281: TCL ERROR: exit code is not int!? Please report this to vim-dev@vim.org"));
+! 	    newerr = FAIL;
+  	}
+  	else
+! 	{
+! 	    sprintf(buf, _("E572: exit code %d"), retval);
+! 	    tclerrmsg(buf);
+! 	    if (retval == 0)
+! 	    {
+! 		did_emsg = 0;
+! 		newerr = OK;
+! 	    }
+! 	    else
+! 		newerr = FAIL;
+! 	}
+  
+  	tcldelthisinterp();
+      }
+--- 1863,1885 ----
+  {
+      int newerr = OK;
+  
+!     if (Tcl_InterpDeleted(tclinfo.interp)     /* True if we intercepted Tcl's exit command */
+! #if (TCL_MAJOR_VERSION == 8 && TCL_MINOR_VERSION >= 5) || TCL_MAJOR_VERSION > 8
+! 	|| Tcl_LimitExceeded(tclinfo.interp)  /* True if the interpreter cannot continue */
+! #endif
+! 	)
+      {
+  	char buf[50];
+  
+! 	sprintf(buf, _("E572: exit code %d"), tclinfo.exitvalue);
+! 	tclerrmsg(buf);
+! 	if (tclinfo.exitvalue == 0)
+  	{
+! 	    did_emsg = 0;
+! 	    newerr = OK;
+  	}
+  	else
+! 	    newerr = FAIL;
+  
+  	tcldelthisinterp();
+      }
+***************
+*** 2021,2027 ****
+  	Tcl_SetVar(tclinfo.interp, var_line, line, 0);
+  	Tcl_AllowExceptions(tclinfo.interp);
+  	err = Tcl_Eval(tclinfo.interp, script);
+! 	if (err != TCL_OK)
+  	    break;
+  	line = (char *)Tcl_GetVar(tclinfo.interp, var_line, 0);
+  	if (line)
+--- 1993,2004 ----
+  	Tcl_SetVar(tclinfo.interp, var_line, line, 0);
+  	Tcl_AllowExceptions(tclinfo.interp);
+  	err = Tcl_Eval(tclinfo.interp, script);
+! 	if (err != TCL_OK
+! 	    || Tcl_InterpDeleted(tclinfo.interp)
+! #if (TCL_MAJOR_VERSION == 8 && TCL_MINOR_VERSION >= 5) || TCL_MAJOR_VERSION > 8
+! 	    || Tcl_LimitExceeded(tclinfo.interp)
+! #endif
+! 	   )
+  	    break;
+  	line = (char *)Tcl_GetVar(tclinfo.interp, var_line, 0);
+  	if (line)
+*** ../vim-7.3.450/src/version.c	2012-02-22 15:34:05.000000000 +0100
+--- src/version.c	2012-02-22 16:00:49.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     451,
+  /**/
+
+-- 
+Where do you want to crash today?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.452 b/source/ap/vim/patches/7.3.452
new file mode 100644
index 00000000..295b2fe8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.452
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.452
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.452
+Problem:    Undo broken when pasting close to the last line. (Andrey Radev)
+Solution:   Use a flag to remember if the deleted included the last line.
+	    (Christian Brabandt)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.451/src/ops.c	2012-01-10 13:46:18.000000000 +0100
+--- src/ops.c	2012-02-22 17:32:40.000000000 +0100
+***************
+*** 1943,1954 ****
+--- 1943,1956 ----
+  	else				/* delete characters between lines */
+  	{
+  	    pos_T   curpos;
++ 	    int     delete_last_line;
+  
+  	    /* save deleted and changed lines for undo */
+  	    if (u_save((linenr_T)(curwin->w_cursor.lnum - 1),
+  		 (linenr_T)(curwin->w_cursor.lnum + oap->line_count)) == FAIL)
+  		return FAIL;
+  
++ 	    delete_last_line = (oap->end.lnum == curbuf->b_ml.ml_line_count);
+  	    truncate_line(TRUE);	/* delete from cursor to end of line */
+  
+  	    curpos = curwin->w_cursor;	/* remember curwin->w_cursor */
+***************
+*** 1956,1962 ****
+  	    del_lines((long)(oap->line_count - 2), FALSE);
+  
+  	    n = (oap->end.col + 1 - !oap->inclusive);
+! 	    if (oap->inclusive && oap->end.lnum == curbuf->b_ml.ml_line_count
+  		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+  	    {
+  		/* Special case: gH<Del> deletes the last line. */
+--- 1958,1964 ----
+  	    del_lines((long)(oap->line_count - 2), FALSE);
+  
+  	    n = (oap->end.col + 1 - !oap->inclusive);
+! 	    if (oap->inclusive && delete_last_line
+  		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+  	    {
+  		/* Special case: gH<Del> deletes the last line. */
+*** ../vim-7.3.451/src/version.c	2012-02-22 16:01:53.000000000 +0100
+--- src/version.c	2012-02-22 17:37:18.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     452,
+  /**/
+
+-- 
+From "know your smileys":
+ =):-)	Uncle Sam
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.453 b/source/ap/vim/patches/7.3.453
new file mode 100644
index 00000000..cf0f0e71
--- /dev/null
+++ b/source/ap/vim/patches/7.3.453
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.453
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.453
+Problem:    Pasting in the command line is slow.
+Solution:   Don't redraw if there is another character to read. (Dominique
+	    Pelle)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.452/src/ex_getln.c	2012-02-22 14:58:24.000000000 +0100
+--- src/ex_getln.c	2012-02-22 17:53:32.000000000 +0100
+***************
+*** 1852,1859 ****
+  # endif
+  		)
+  	    /* Always redraw the whole command line to fix shaping and
+! 	     * right-left typing.  Not efficient, but it works. */
+! 	    redrawcmd();
+  #endif
+      }
+  
+--- 1852,1862 ----
+  # endif
+  		)
+  	    /* Always redraw the whole command line to fix shaping and
+! 	     * right-left typing.  Not efficient, but it works.
+! 	     * Do it only when there are no characters left to read
+! 	     * to avoid useless intermediate redraws. */
+! 	    if (vpeekc() == NUL)
+! 		redrawcmd();
+  #endif
+      }
+  
+*** ../vim-7.3.452/src/version.c	2012-02-22 17:37:55.000000000 +0100
+--- src/version.c	2012-02-22 17:56:59.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     453,
+  /**/
+
+-- 
+From "know your smileys":
+ <<<:-{    Worf (Never smiles anyways, so he's a bad smiley)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.454 b/source/ap/vim/patches/7.3.454
new file mode 100644
index 00000000..8658926a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.454
@@ -0,0 +1,84 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.454
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.454
+Problem:    Re-allocating memory slows Vim down.
+Solution:   Use realloc() in ga_grow(). (Dominique Pelle)
+Files:	    src/misc2.c
+
+
+*** ../vim-7.3.453/src/misc2.c	2012-02-22 14:58:24.000000000 +0100
+--- src/misc2.c	2012-02-22 18:07:45.000000000 +0100
+***************
+*** 2064,2087 ****
+      garray_T	*gap;
+      int		n;
+  {
+!     size_t	len;
+      char_u	*pp;
+  
+      if (gap->ga_maxlen - gap->ga_len < n)
+      {
+  	if (n < gap->ga_growsize)
+  	    n = gap->ga_growsize;
+! 	len = gap->ga_itemsize * (gap->ga_len + n);
+! 	pp = alloc_clear((unsigned)len);
+  	if (pp == NULL)
+  	    return FAIL;
+  	gap->ga_maxlen = gap->ga_len + n;
+- 	if (gap->ga_data != NULL)
+- 	{
+- 	    mch_memmove(pp, gap->ga_data,
+- 				      (size_t)(gap->ga_itemsize * gap->ga_len));
+- 	    vim_free(gap->ga_data);
+- 	}
+  	gap->ga_data = pp;
+      }
+      return OK;
+--- 2064,2085 ----
+      garray_T	*gap;
+      int		n;
+  {
+!     size_t	old_len;
+!     size_t	new_len;
+      char_u	*pp;
+  
+      if (gap->ga_maxlen - gap->ga_len < n)
+      {
+  	if (n < gap->ga_growsize)
+  	    n = gap->ga_growsize;
+! 	new_len = gap->ga_itemsize * (gap->ga_len + n);
+! 	pp = (gap->ga_data == NULL)
+! 			? alloc(new_len) : vim_realloc(gap->ga_data, new_len);
+  	if (pp == NULL)
+  	    return FAIL;
++ 	old_len = gap->ga_itemsize * gap->ga_maxlen;
++ 	vim_memset(pp + old_len, 0, new_len - old_len);
+  	gap->ga_maxlen = gap->ga_len + n;
+  	gap->ga_data = pp;
+      }
+      return OK;
+*** ../vim-7.3.453/src/version.c	2012-02-22 17:58:00.000000000 +0100
+--- src/version.c	2012-02-22 18:09:42.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     454,
+  /**/
+
+-- 
+From "know your smileys":
+ (X0||)   Double hamburger with lettuce and tomato
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.455 b/source/ap/vim/patches/7.3.455
new file mode 100644
index 00000000..217b00d7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.455
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.455
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.455
+Problem:    Using many continuation lines can be slow.
+Solution:   Adjust the reallocation size to the current length.
+Files:	    src/ex_cmds2.c
+
+
+*** ../vim-7.3.454/src/ex_cmds2.c	2012-02-11 20:40:49.000000000 +0100
+--- src/ex_cmds2.c	2012-02-22 18:24:11.000000000 +0100
+***************
+*** 3448,3454 ****
+  	{
+  	    garray_T    ga;
+  
+! 	    ga_init2(&ga, (int)sizeof(char_u), 200);
+  	    ga_concat(&ga, line);
+  	    ga_concat(&ga, p + 1);
+  	    for (;;)
+--- 3448,3454 ----
+  	{
+  	    garray_T    ga;
+  
+! 	    ga_init2(&ga, (int)sizeof(char_u), 400);
+  	    ga_concat(&ga, line);
+  	    ga_concat(&ga, p + 1);
+  	    for (;;)
+***************
+*** 3460,3465 ****
+--- 3460,3474 ----
+  		p = skipwhite(sp->nextline);
+  		if (*p != '\\')
+  		    break;
++ 		/* Adjust the growsize to the current length to speed up
++ 		 * concatenating many lines. */
++ 		if (ga.ga_len > 400)
++ 		{
++ 		    if (ga.ga_len > 8000)
++ 			ga.ga_growsize = 8000;
++ 		    else
++ 			ga.ga_growsize = ga.ga_len;
++ 		}
+  		ga_concat(&ga, p + 1);
+  	    }
+  	    ga_append(&ga, NUL);
+*** ../vim-7.3.454/src/version.c	2012-02-22 18:12:29.000000000 +0100
+--- src/version.c	2012-02-22 18:24:58.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     455,
+  /**/
+
+-- 
+From "know your smileys":
+ :-X	My lips are sealed
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.456 b/source/ap/vim/patches/7.3.456
new file mode 100644
index 00000000..26fc2a98
--- /dev/null
+++ b/source/ap/vim/patches/7.3.456
@@ -0,0 +1,376 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.456
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.456
+Problem:    ":tab drop file" has several problems, including moving the
+	    current window and opening a new tab for a file that already has a
+	    window.
+Solution:   Refactor ":tab drop" handling. (Hirohito Higashi)
+Files:	    src/buffer.c, src/testdir/test62.in, src/testdir/test62.ok
+
+
+*** ../vim-7.3.455/src/buffer.c	2012-02-22 14:58:24.000000000 +0100
+--- src/buffer.c	2012-02-22 19:08:34.000000000 +0100
+***************
+*** 4405,4411 ****
+  {
+      int		i;
+      win_T	*wp, *wpnext;
+!     char_u	*opened;	/* array of flags for which args are open */
+      int		opened_len;	/* length of opened[] */
+      int		use_firstwin = FALSE;	/* use first window for arglist */
+      int		split_ret = OK;
+--- 4405,4416 ----
+  {
+      int		i;
+      win_T	*wp, *wpnext;
+!     char_u	*opened;	/* Array of weight for which args are open:
+! 				 *  0: not opened
+! 				 *  1: opened in other tab
+! 				 *  2: opened in curtab
+! 				 *  3: opened in curtab and curwin
+! 				 */
+      int		opened_len;	/* length of opened[] */
+      int		use_firstwin = FALSE;	/* use first window for arglist */
+      int		split_ret = OK;
+***************
+*** 4414,4419 ****
+--- 4419,4426 ----
+      buf_T	*buf;
+      tabpage_T	*tpnext;
+      int		had_tab = cmdmod.tab;
++     win_T	*old_curwin, *last_curwin;
++     tabpage_T	*old_curtab, *last_curtab;
+      win_T	*new_curwin = NULL;
+      tabpage_T	*new_curtab = NULL;
+  
+***************
+*** 4430,4435 ****
+--- 4437,4451 ----
+      if (opened == NULL)
+  	return;
+  
++     /* Autocommands may do anything to the argument list.  Make sure it's not
++      * freed while we are working here by "locking" it.  We still have to
++      * watch out for its size to be changed. */
++     alist = curwin->w_alist;
++     ++alist->al_refcount;
++ 
++     old_curwin = curwin;
++     old_curtab = curtab;
++ 
+  #ifdef FEAT_GUI
+      need_mouse_correct = TRUE;
+  #endif
+***************
+*** 4451,4486 ****
+  	    wpnext = wp->w_next;
+  	    buf = wp->w_buffer;
+  	    if (buf->b_ffname == NULL
+! 		    || buf->b_nwindows > 1
+  #ifdef FEAT_VERTSPLIT
+  		    || wp->w_width != Columns
+  #endif
+  		    )
+! 		i = ARGCOUNT;
+  	    else
+  	    {
+  		/* check if the buffer in this window is in the arglist */
+! 		for (i = 0; i < ARGCOUNT; ++i)
+  		{
+! 		    if (ARGLIST[i].ae_fnum == buf->b_fnum
+! 			    || fullpathcmp(alist_name(&ARGLIST[i]),
+! 					      buf->b_ffname, TRUE) & FPC_SAME)
+  		    {
+! 			if (i < opened_len)
+  			{
+! 			    opened[i] = TRUE;
+  			    if (i == 0)
+  			    {
+  				new_curwin = wp;
+  				new_curtab = curtab;
+  			    }
+  			}
+! 			if (wp->w_alist != curwin->w_alist)
+  			{
+  			    /* Use the current argument list for all windows
+  			     * containing a file from it. */
+  			    alist_unlink(wp->w_alist);
+! 			    wp->w_alist = curwin->w_alist;
+  			    ++wp->w_alist->al_refcount;
+  			}
+  			break;
+--- 4467,4517 ----
+  	    wpnext = wp->w_next;
+  	    buf = wp->w_buffer;
+  	    if (buf->b_ffname == NULL
+! 		    || (!keep_tabs && buf->b_nwindows > 1)
+  #ifdef FEAT_VERTSPLIT
+  		    || wp->w_width != Columns
+  #endif
+  		    )
+! 		i = opened_len;
+  	    else
+  	    {
+  		/* check if the buffer in this window is in the arglist */
+! 		for (i = 0; i < opened_len; ++i)
+  		{
+! 		    if (i < alist->al_ga.ga_len
+! 			    && (AARGLIST(alist)[i].ae_fnum == buf->b_fnum
+! 				|| fullpathcmp(alist_name(&AARGLIST(alist)[i]),
+! 					      buf->b_ffname, TRUE) & FPC_SAME))
+  		    {
+! 			int weight = 1;
+! 
+! 			if (old_curtab == curtab)
+! 			{
+! 			    ++weight;
+! 			    if (old_curwin == wp)
+! 				++weight;
+! 			}
+! 
+! 			if (weight > (int)opened[i])
+  			{
+! 			    opened[i] = (char_u)weight;
+  			    if (i == 0)
+  			    {
++ 				if (new_curwin != NULL)
++ 				    new_curwin->w_arg_idx = opened_len;
+  				new_curwin = wp;
+  				new_curtab = curtab;
+  			    }
+  			}
+! 			else if (keep_tabs)
+! 			    i = opened_len;
+! 
+! 			if (wp->w_alist != alist)
+  			{
+  			    /* Use the current argument list for all windows
+  			     * containing a file from it. */
+  			    alist_unlink(wp->w_alist);
+! 			    wp->w_alist = alist;
+  			    ++wp->w_alist->al_refcount;
+  			}
+  			break;
+***************
+*** 4489,4495 ****
+  	    }
+  	    wp->w_arg_idx = i;
+  
+! 	    if (i == ARGCOUNT && !keep_tabs)	/* close this window */
+  	    {
+  		if (P_HID(buf) || forceit || buf->b_nwindows > 1
+  							|| !bufIsChanged(buf))
+--- 4520,4526 ----
+  	    }
+  	    wp->w_arg_idx = i;
+  
+! 	    if (i == opened_len && !keep_tabs)/* close this window */
+  	    {
+  		if (P_HID(buf) || forceit || buf->b_nwindows > 1
+  							|| !bufIsChanged(buf))
+***************
+*** 4511,4517 ****
+  		    }
+  #ifdef FEAT_WINDOWS
+  		    /* don't close last window */
+! 		    if (firstwin == lastwin && first_tabpage->tp_next == NULL)
+  #endif
+  			use_firstwin = TRUE;
+  #ifdef FEAT_WINDOWS
+--- 4542,4549 ----
+  		    }
+  #ifdef FEAT_WINDOWS
+  		    /* don't close last window */
+! 		    if (firstwin == lastwin
+! 			    && (first_tabpage->tp_next == NULL || !had_tab))
+  #endif
+  			use_firstwin = TRUE;
+  #ifdef FEAT_WINDOWS
+***************
+*** 4545,4564 ****
+       * Open a window for files in the argument list that don't have one.
+       * ARGCOUNT may change while doing this, because of autocommands.
+       */
+!     if (count > ARGCOUNT || count <= 0)
+! 	count = ARGCOUNT;
+! 
+!     /* Autocommands may do anything to the argument list.  Make sure it's not
+!      * freed while we are working here by "locking" it.  We still have to
+!      * watch out for its size to be changed. */
+!     alist = curwin->w_alist;
+!     ++alist->al_refcount;
+  
+  #ifdef FEAT_AUTOCMD
+      /* Don't execute Win/Buf Enter/Leave autocommands here. */
+      ++autocmd_no_enter;
+      ++autocmd_no_leave;
+  #endif
+      win_enter(lastwin, FALSE);
+  #ifdef FEAT_WINDOWS
+      /* ":drop all" should re-use an empty window to avoid "--remote-tab"
+--- 4577,4592 ----
+       * Open a window for files in the argument list that don't have one.
+       * ARGCOUNT may change while doing this, because of autocommands.
+       */
+!     if (count > opened_len || count <= 0)
+! 	count = opened_len;
+  
+  #ifdef FEAT_AUTOCMD
+      /* Don't execute Win/Buf Enter/Leave autocommands here. */
+      ++autocmd_no_enter;
+      ++autocmd_no_leave;
+  #endif
++     last_curwin = curwin;
++     last_curtab = curtab;
+      win_enter(lastwin, FALSE);
+  #ifdef FEAT_WINDOWS
+      /* ":drop all" should re-use an empty window to avoid "--remote-tab"
+***************
+*** 4568,4578 ****
+  	use_firstwin = TRUE;
+  #endif
+  
+!     for (i = 0; i < count && i < alist->al_ga.ga_len && !got_int; ++i)
+      {
+  	if (alist == &global_alist && i == global_alist.al_ga.ga_len - 1)
+  	    arg_had_last = TRUE;
+! 	if (i < opened_len && opened[i])
+  	{
+  	    /* Move the already present window to below the current window */
+  	    if (curwin->w_arg_idx != i)
+--- 4596,4606 ----
+  	use_firstwin = TRUE;
+  #endif
+  
+!     for (i = 0; i < count && i < opened_len && !got_int; ++i)
+      {
+  	if (alist == &global_alist && i == global_alist.al_ga.ga_len - 1)
+  	    arg_had_last = TRUE;
+! 	if (opened[i] > 0)
+  	{
+  	    /* Move the already present window to below the current window */
+  	    if (curwin->w_arg_idx != i)
+***************
+*** 4581,4587 ****
+  		{
+  		    if (wpnext->w_arg_idx == i)
+  		    {
+! 			win_move_after(wpnext, curwin);
+  			break;
+  		    }
+  		}
+--- 4609,4621 ----
+  		{
+  		    if (wpnext->w_arg_idx == i)
+  		    {
+! 			if (keep_tabs)
+! 			{
+! 			    new_curwin = wpnext;
+! 			    new_curtab = curtab;
+! 			}
+! 			else
+! 			    win_move_after(wpnext, curwin);
+  			break;
+  		    }
+  		}
+***************
+*** 4636,4641 ****
+--- 4670,4683 ----
+  #ifdef FEAT_AUTOCMD
+      --autocmd_no_enter;
+  #endif
++     /* restore last referenced tabpage's curwin */
++     if (last_curtab != new_curtab)
++     {
++ 	if (valid_tabpage(last_curtab))
++ 	    goto_tabpage_tp(last_curtab);
++ 	if (win_valid(last_curwin))
++ 	    win_enter(last_curwin, FALSE);
++     }
+      /* to window with first arg */
+      if (valid_tabpage(new_curtab))
+  	goto_tabpage_tp(new_curtab);
+*** ../vim-7.3.455/src/testdir/test62.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test62.in	2012-02-22 18:45:10.000000000 +0100
+***************
+*** 50,55 ****
+--- 50,92 ----
+  :call append(line('$'), test_status)
+  :"
+  :"
++ :" Test for ":tab drop exist-file" to keep current window.
++ :sp test1
++ :tab drop test1
++ :let test_status = 'tab drop 1: fail'
++ :if tabpagenr('$') == 1 && winnr('$') == 2 && winnr() == 1
++ :    let test_status = 'tab drop 1: pass'
++ :endif
++ :close
++ :call append(line('$'), test_status)
++ :"
++ :"
++ :" Test for ":tab drop new-file" to keep current window of tabpage 1.
++ :split
++ :tab drop newfile
++ :let test_status = 'tab drop 2: fail'
++ :if tabpagenr('$') == 2 && tabpagewinnr(1, '$') == 2 && tabpagewinnr(1) == 1
++ :    let test_status = 'tab drop 2: pass'
++ :endif
++ :tabclose
++ :q
++ :call append(line('$'), test_status)
++ :"
++ :"
++ :" Test for ":tab drop multi-opend-file" to keep current tabpage and window.
++ :new test1
++ :tabnew
++ :new test1
++ :tab drop test1
++ :let test_status = 'tab drop 3: fail'
++ :if tabpagenr() == 2 && tabpagewinnr(2, '$') == 2 && tabpagewinnr(2) == 1
++ :    let test_status = 'tab drop 3: pass'
++ :endif
++ :tabclose
++ :q
++ :call append(line('$'), test_status)
++ :"
++ :"
+  :/^Results/,$w! test.out
+  :qa!
+  ENDTEST
+*** ../vim-7.3.455/src/testdir/test62.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test62.ok	2012-02-22 18:45:10.000000000 +0100
+***************
+*** 5,7 ****
+--- 5,10 ----
+  this is tab page 4
+  gettabvar: pass
+  settabvar: pass
++ tab drop 1: pass
++ tab drop 2: pass
++ tab drop 3: pass
+*** ../vim-7.3.455/src/version.c	2012-02-22 18:29:29.000000000 +0100
+--- src/version.c	2012-02-22 19:11:52.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     456,
+  /**/
+
+-- 
+% cat /usr/include/life.h
+void life(void);
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.457 b/source/ap/vim/patches/7.3.457
new file mode 100644
index 00000000..e60d6242
--- /dev/null
+++ b/source/ap/vim/patches/7.3.457
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.457
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.457
+Problem:    When setting $VIMRUNTIME later the directory for fetching
+            translated messages is not adjusted.
+Solution:   Put bindtextdomain() in vim_setenv().
+Files:      src/misc1.c
+
+
+*** ../vim-7.3.456/src/misc1.c	2012-02-05 22:05:44.000000000 +0100
+--- src/misc1.c	2012-02-26 13:27:28.000000000 +0100
+***************
+*** 4133,4149 ****
+  	{
+  	    vim_setenv((char_u *)"VIMRUNTIME", p);
+  	    didset_vimruntime = TRUE;
+- #ifdef FEAT_GETTEXT
+- 	    {
+- 		char_u	*buf = concat_str(p, (char_u *)"/lang");
+- 
+- 		if (buf != NULL)
+- 		{
+- 		    bindtextdomain(VIMPACKAGE, (char *)buf);
+- 		    vim_free(buf);
+- 		}
+- 	    }
+- #endif
+  	}
+  	else
+  	{
+--- 4133,4138 ----
+***************
+*** 4221,4226 ****
+--- 4210,4231 ----
+  	putenv((char *)envbuf);
+      }
+  #endif
++ #ifdef FEAT_GETTEXT
++     /*
++      * When setting $VIMRUNTIME adjust the directory to find message
++      * translations to $VIMRUNTIME/lang.
++      */
++     if (*val != NUL && STRICMP(name, "VIMRUNTIME") == 0)
++     {
++ 	char_u	*buf = concat_str(val, (char_u *)"/lang");
++ 
++ 	if (buf != NULL)
++ 	{
++ 	    bindtextdomain(VIMPACKAGE, (char *)buf);
++ 	    vim_free(buf);
++ 	}
++     }
++ #endif
+  }
+  
+  #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
+*** ../vim-7.3.456/src/version.c	2012-02-22 19:13:00.000000000 +0100
+--- src/version.c	2012-02-29 13:47:09.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     457,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+118. You are on a first-name basis with your ISP's staff.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.458 b/source/ap/vim/patches/7.3.458
new file mode 100644
index 00000000..9bd44073
--- /dev/null
+++ b/source/ap/vim/patches/7.3.458
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.458
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.458
+Problem:    Crash when calling smsg() during startup.
+Solution:   Don't use 'shortmess' when it is not set yet.
+Files:	    src/option.c
+
+
+*** ../vim-7.3.457/src/option.c	2012-02-20 22:18:22.000000000 +0100
+--- src/option.c	2012-02-26 13:14:48.000000000 +0100
+***************
+*** 10984,10990 ****
+  shortmess(x)
+      int	    x;
+  {
+!     return (   vim_strchr(p_shm, x) != NULL
+  	    || (vim_strchr(p_shm, 'a') != NULL
+  		&& vim_strchr((char_u *)SHM_A, x) != NULL));
+  }
+--- 10984,10991 ----
+  shortmess(x)
+      int	    x;
+  {
+!     return p_shm != NULL &&
+! 	    (   vim_strchr(p_shm, x) != NULL
+  	    || (vim_strchr(p_shm, 'a') != NULL
+  		&& vim_strchr((char_u *)SHM_A, x) != NULL));
+  }
+*** ../vim-7.3.457/src/version.c	2012-02-29 13:49:03.000000000 +0100
+--- src/version.c	2012-02-29 13:50:52.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     458,
+  /**/
+
+-- 
+Support your right to bare arms!  Wear short sleeves!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.459 b/source/ap/vim/patches/7.3.459
new file mode 100644
index 00000000..d75a38b4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.459
@@ -0,0 +1,71 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.459
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.459
+Problem:    Win32: Warnings for type conversion.
+Solution:   Add type casts. (Mike Williams)
+Files:	    src/misc2.c, src/os_win32.c
+
+
+*** ../vim-7.3.458/src/misc2.c	2012-02-22 18:12:29.000000000 +0100
+--- src/misc2.c	2012-02-29 13:44:17.000000000 +0100
+***************
+*** 2074,2080 ****
+  	    n = gap->ga_growsize;
+  	new_len = gap->ga_itemsize * (gap->ga_len + n);
+  	pp = (gap->ga_data == NULL)
+! 			? alloc(new_len) : vim_realloc(gap->ga_data, new_len);
+  	if (pp == NULL)
+  	    return FAIL;
+  	old_len = gap->ga_itemsize * gap->ga_maxlen;
+--- 2074,2080 ----
+  	    n = gap->ga_growsize;
+  	new_len = gap->ga_itemsize * (gap->ga_len + n);
+  	pp = (gap->ga_data == NULL)
+! 	      ? alloc((unsigned)new_len) : vim_realloc(gap->ga_data, new_len);
+  	if (pp == NULL)
+  	    return FAIL;
+  	old_len = gap->ga_itemsize * gap->ga_maxlen;
+*** ../vim-7.3.458/src/os_win32.c	2012-02-22 15:34:05.000000000 +0100
+--- src/os_win32.c	2012-02-29 13:43:39.000000000 +0100
+***************
+*** 264,270 ****
+      static void
+  unescape_shellxquote(char_u *p, char_u *escaped)
+  {
+!     int	    l = STRLEN(p);
+      int	    n;
+  
+      while (*p != NUL)
+--- 264,270 ----
+      static void
+  unescape_shellxquote(char_u *p, char_u *escaped)
+  {
+!     int	    l = (int)STRLEN(p);
+      int	    n;
+  
+      while (*p != NUL)
+*** ../vim-7.3.458/src/version.c	2012-02-29 13:51:32.000000000 +0100
+--- src/version.c	2012-02-29 13:58:08.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     459,
+  /**/
+
+-- 
+"A clear conscience is usually the sign of a bad memory."
+                             -- Steven Wright
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.460 b/source/ap/vim/patches/7.3.460
new file mode 100644
index 00000000..c1d7e85b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.460
@@ -0,0 +1,89 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.460
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.460
+Problem:    Win32: UPX does not compress 64 bit binaries.
+Solution:   Mention and add the alternative: mpress. (Dave Bodenstab)
+Files:	    src/INSTALLpc.txt, src/Make_ming.mak
+
+
+*** ../vim-7.3.459/src/INSTALLpc.txt	2011-07-15 13:51:57.000000000 +0200
+--- src/INSTALLpc.txt	2012-02-29 14:01:34.000000000 +0100
+***************
+*** 239,244 ****
+--- 239,250 ----
+  found at
+      http://www.upx.org/
+  
++ As of 2011, UPX still does not support compressing 64-bit EXE's; if you have
++ built a 64-bit vim then an alternative to UPX is 'MPRESS'. MPRESS can be found
++ at:
++     http://www.matcode.com/mpress.htm
++ 
++ 
+  ADDITION: NLS support with MinGW
+  
+  (by Eduardo F. Amatria <eferna1@platea.pntic.mec.es>)
+*** ../vim-7.3.459/src/Make_ming.mak	2011-10-12 14:11:43.000000000 +0200
+--- src/Make_ming.mak	2012-02-29 16:54:09.000000000 +0100
+***************
+*** 14,22 ****
+  # it's just run out of memory or something.  Run again, and it will continue
+  # with 'xxd'.
+  #
+! # "make upx" makes *compressed* versions of the GUI and console EXEs, using the
+! # excellent UPX compressor:
+  #     http://upx.sourceforge.net/
+  #
+  # Maintained by Ron Aaron <ronaharon@yahoo.com>
+  # updated 2003 Jan 20
+--- 14,24 ----
+  # it's just run out of memory or something.  Run again, and it will continue
+  # with 'xxd'.
+  #
+! # "make upx" makes *compressed* versions of the 32 bit GUI and console EXEs,
+! # using the excellent UPX compressor:
+  #     http://upx.sourceforge.net/
++ # "make mpress" uses the MPRESS compressor for 32- and 64-bit EXEs:
++ #     http://www.matcode.com/mpress.htm
+  #
+  # Maintained by Ron Aaron <ronaharon@yahoo.com>
+  # updated 2003 Jan 20
+***************
+*** 640,645 ****
+--- 642,651 ----
+  	upx gvim.exe
+  	upx vim.exe
+  
++ mpress: exes
++ 	mpress gvim.exe
++ 	mpress vim.exe
++ 
+  xxd/xxd.exe: xxd/xxd.c
+  	$(MAKE) -C xxd -f Make_ming.mak CC=$(CC)
+  
+*** ../vim-7.3.459/src/version.c	2012-02-29 13:58:43.000000000 +0100
+--- src/version.c	2012-02-29 16:54:40.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     460,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+119. You are reading a book and look for the scroll bar to get to
+     the next page.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.461 b/source/ap/vim/patches/7.3.461
new file mode 100644
index 00000000..53c83c06
--- /dev/null
+++ b/source/ap/vim/patches/7.3.461
@@ -0,0 +1,243 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.461
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.461
+Problem:    The InsertCharPre autocommand event is not triggered during
+	    completion and when typing several characters quickly.
+Solution:   Also trigger InsertCharPre during completion.  Do not read ahead
+	    when an InsertCharPre autocommand is defined. (Yasuhiro Matsumoto)
+Files:	    src/edit.c, src/fileio.c, src/proto/fileio.pro
+
+
+*** ../vim-7.3.460/src/edit.c	2012-02-04 23:34:57.000000000 +0100
+--- src/edit.c	2012-02-29 18:17:31.000000000 +0100
+***************
+*** 259,264 ****
+--- 259,267 ----
+  static void ins_try_si __ARGS((int c));
+  #endif
+  static colnr_T get_nolist_virtcol __ARGS((void));
++ #ifdef FEAT_AUTOCMD
++ static char_u *do_insert_char_pre __ARGS((int c));
++ #endif
+  
+  static colnr_T	Insstart_textlen;	/* length of line when insert started */
+  static colnr_T	Insstart_blank_vcol;	/* vcol for first inserted blank */
+***************
+*** 784,790 ****
+  		 * completion: Add to "compl_leader". */
+  		if (ins_compl_accept_char(c))
+  		{
+! 		    ins_compl_addleader(c);
+  		    continue;
+  		}
+  
+--- 787,806 ----
+  		 * completion: Add to "compl_leader". */
+  		if (ins_compl_accept_char(c))
+  		{
+! #ifdef FEAT_AUTOCMD
+! 		    /* Trigger InsertCharPre. */
+! 		    char_u *str = do_insert_char_pre(c);
+! 		    char_u *p;
+! 
+! 		    if (str != NULL)
+! 		    {
+! 			for (p = str; *p != NUL; mb_ptr_adv(p))
+! 			    ins_compl_addleader(PTR2CHAR(p));
+! 			vim_free(str);
+! 		    }
+! 		    else
+! #endif
+! 			ins_compl_addleader(c);
+  		    continue;
+  		}
+  
+***************
+*** 1393,1426 ****
+  #ifdef FEAT_AUTOCMD
+  	    if (!p_paste)
+  	    {
+! 		/* Trigger the InsertCharPre event.  Lock the text to avoid
+! 		 * weird things from happening. */
+! 		set_vim_var_char(c);
+! 		++textlock;
+! 		if (apply_autocmds(EVENT_INSERTCHARPRE, NULL, NULL,
+! 							       FALSE, curbuf))
+! 		{
+! 		    /* Get the new value of v:char.  If it is more than one
+! 		     * character insert it literally. */
+! 		    char_u *s = get_vim_var_str(VV_CHAR);
+! 		    if (MB_CHARLEN(s) > 1)
+  		    {
+! 			if (stop_arrow() != FAIL)
+  			{
+! 			    ins_str(s);
+! 			    AppendToRedobuffLit(s, -1);
+  			}
+! 			c = NUL;
+  		    }
+! 		    else
+! 			c = PTR2CHAR(s);
+  		}
+  
+! 		set_vim_var_string(VV_CHAR, NULL, -1);
+! 		--textlock;
+! 
+! 		/* If the new value is an empty string then don't insert a
+! 		 * char. */
+  		if (c == NUL)
+  		    break;
+  	    }
+--- 1409,1439 ----
+  #ifdef FEAT_AUTOCMD
+  	    if (!p_paste)
+  	    {
+! 		/* Trigger InsertCharPre. */
+! 		char_u *str = do_insert_char_pre(c);
+! 		char_u *p;
+! 
+! 		if (str != NULL)
+! 		{
+! 		    if (*str != NUL && stop_arrow() != FAIL)
+  		    {
+! 			/* Insert the new value of v:char literally. */
+! 			for (p = str; *p != NUL; mb_ptr_adv(p))
+  			{
+! 			    c = PTR2CHAR(p);
+! 			    if (c == CAR || c == K_KENTER || c == NL)
+! 				ins_eol(c);
+! 			    else
+! 				ins_char(c);
+  			}
+! 			AppendToRedobuffLit(str, -1);
+  		    }
+! 		    vim_free(str);
+! 		    c = NUL;
+  		}
+  
+! 		/* If the new value is already inserted or an empty string
+! 		 * then don't insert any character. */
+  		if (c == NUL)
+  		    break;
+  	    }
+***************
+*** 5883,5888 ****
+--- 5896,5903 ----
+       * Don't do this when 'cindent' or 'indentexpr' is set, because we might
+       * need to re-indent at a ':', or any other character (but not what
+       * 'paste' is set)..
++      * Don't do this when there an InsertCharPre autocommand is defined,
++      * because we need to fire the event for every character.
+       */
+  #ifdef USE_ON_FLY_SCROLL
+      dont_scroll = FALSE;		/* allow scrolling here */
+***************
+*** 5900,5905 ****
+--- 5915,5923 ----
+  #ifdef FEAT_RIGHTLEFT
+  	    && !p_ri
+  #endif
++ #ifdef FEAT_AUTOCMD
++ 	    && !has_insertcharpre()
++ #endif
+  	       )
+      {
+  #define INPUT_BUFLEN 100
+***************
+*** 10068,10070 ****
+--- 10086,10123 ----
+      validate_virtcol();
+      return curwin->w_virtcol;
+  }
++ 
++ #ifdef FEAT_AUTOCMD
++ /*
++  * Handle the InsertCharPre autocommand.
++  * "c" is the character that was typed.
++  * Return a pointer to allocated memory with the replacement string.
++  * Return NULL to continue inserting "c".
++  */
++     static char_u *
++ do_insert_char_pre(c)
++     int c;
++ {
++     char_u *res;
++ 
++     /* Return quickly when there is nothing to do. */
++     if (!has_insertcharpre())
++ 	return NULL;
++ 
++     /* Lock the text to avoid weird things from happening. */
++     ++textlock;
++     set_vim_var_char(c);  /* set v:char */
++ 
++     if (apply_autocmds(EVENT_INSERTCHARPRE, NULL, NULL, FALSE, curbuf))
++ 	/* Get the new value of v:char.  It may be empty or more than one
++ 	 * character. */
++ 	res = vim_strsave(get_vim_var_str(VV_CHAR));
++     else
++ 	res = NULL;
++ 
++     set_vim_var_string(VV_CHAR, NULL, -1);  /* clear v:char */
++     --textlock;
++ 
++     return res;
++ }
++ #endif
+*** ../vim-7.3.460/src/fileio.c	2012-02-12 20:13:55.000000000 +0100
+--- src/fileio.c	2012-02-29 17:50:32.000000000 +0100
+***************
+*** 9116,9121 ****
+--- 9116,9130 ----
+      return (first_autopat[(int)EVENT_CURSORMOVEDI] != NULL);
+  }
+  
++ /*
++  * Return TRUE when there is an InsertCharPre autocommand defined.
++  */
++     int
++ has_insertcharpre()
++ {
++     return (first_autopat[(int)EVENT_INSERTCHARPRE] != NULL);
++ }
++ 
+      static int
+  apply_autocmds_group(event, fname, fname_io, force, group, buf, eap)
+      event_T	event;
+*** ../vim-7.3.460/src/proto/fileio.pro	2012-02-12 20:13:55.000000000 +0100
+--- src/proto/fileio.pro	2012-02-29 17:50:38.000000000 +0100
+***************
+*** 44,49 ****
+--- 44,50 ----
+  int trigger_cursorhold __ARGS((void));
+  int has_cursormoved __ARGS((void));
+  int has_cursormovedI __ARGS((void));
++ int has_insertcharpre __ARGS((void));
+  void block_autocmds __ARGS((void));
+  void unblock_autocmds __ARGS((void));
+  int has_autocmd __ARGS((event_T event, char_u *sfname, buf_T *buf));
+*** ../vim-7.3.460/src/version.c	2012-02-29 16:56:35.000000000 +0100
+--- src/version.c	2012-02-29 18:15:34.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     461,
+  /**/
+
+-- 
+"Computers in the future may weigh no more than 1.5 tons."
+                                   Popular Mechanics, 1949
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.462 b/source/ap/vim/patches/7.3.462
new file mode 100644
index 00000000..df037242
--- /dev/null
+++ b/source/ap/vim/patches/7.3.462
@@ -0,0 +1,191 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.462
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.462
+Problem:    When using ":loadview" folds may be closed unexpectedly.
+Solution:   Take into account foldlevel. (Xavier de Gaye)
+Files:	    src/fold.c
+
+
+*** ../vim-7.3.461/src/fold.c	2012-01-10 22:26:12.000000000 +0100
+--- src/fold.c	2012-02-29 19:18:07.000000000 +0100
+***************
+*** 3292,3298 ****
+  /* put_folds() {{{2 */
+  #if defined(FEAT_SESSION) || defined(PROTO)
+  static int put_folds_recurse __ARGS((FILE *fd, garray_T *gap, linenr_T off));
+! static int put_foldopen_recurse __ARGS((FILE *fd, garray_T *gap, linenr_T off));
+  
+  /*
+   * Write commands to "fd" to restore the manual folds in window "wp".
+--- 3292,3299 ----
+  /* put_folds() {{{2 */
+  #if defined(FEAT_SESSION) || defined(PROTO)
+  static int put_folds_recurse __ARGS((FILE *fd, garray_T *gap, linenr_T off));
+! static int put_foldopen_recurse __ARGS((FILE *fd, win_T *wp, garray_T *gap, linenr_T off));
+! static int put_fold_open_close __ARGS((FILE *fd, fold_T *fp, linenr_T off));
+  
+  /*
+   * Write commands to "fd" to restore the manual folds in window "wp".
+***************
+*** 3312,3318 ****
+  
+      /* If some folds are manually opened/closed, need to restore that. */
+      if (wp->w_fold_manual)
+! 	return put_foldopen_recurse(fd, &wp->w_folds, (linenr_T)0);
+  
+      return OK;
+  }
+--- 3313,3319 ----
+  
+      /* If some folds are manually opened/closed, need to restore that. */
+      if (wp->w_fold_manual)
+! 	return put_foldopen_recurse(fd, wp, &wp->w_folds, (linenr_T)0);
+  
+      return OK;
+  }
+***************
+*** 3352,3363 ****
+   * Returns FAIL when writing failed.
+   */
+      static int
+! put_foldopen_recurse(fd, gap, off)
+      FILE	*fd;
+      garray_T	*gap;
+      linenr_T	off;
+  {
+      int		i;
+      fold_T	*fp;
+  
+      fp = (fold_T *)gap->ga_data;
+--- 3353,3366 ----
+   * Returns FAIL when writing failed.
+   */
+      static int
+! put_foldopen_recurse(fd, wp, gap, off)
+      FILE	*fd;
++     win_T	*wp;
+      garray_T	*gap;
+      linenr_T	off;
+  {
+      int		i;
++     int		level;
+      fold_T	*fp;
+  
+      fp = (fold_T *)gap->ga_data;
+***************
+*** 3367,3393 ****
+  	{
+  	    if (fp->fd_nested.ga_len > 0)
+  	    {
+! 		/* open/close nested folds while this fold is open */
+  		if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  			|| put_eol(fd) == FAIL
+  			|| put_line(fd, "normal zo") == FAIL)
+  		    return FAIL;
+! 		if (put_foldopen_recurse(fd, &fp->fd_nested, off + fp->fd_top)
+  			== FAIL)
+  		    return FAIL;
+  	    }
+- 	    if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+- 		    || put_eol(fd) == FAIL
+- 		    || fprintf(fd, "normal z%c",
+- 				    fp->fd_flags == FD_CLOSED ? 'c' : 'o') < 0
+- 		    || put_eol(fd) == FAIL)
+- 		return FAIL;
+  	}
+  	++fp;
+      }
+  
+      return OK;
+  }
+  #endif /* FEAT_SESSION */
+  
+  /* }}}1 */
+--- 3370,3429 ----
+  	{
+  	    if (fp->fd_nested.ga_len > 0)
+  	    {
+! 		/* open nested folds while this fold is open */
+  		if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  			|| put_eol(fd) == FAIL
+  			|| put_line(fd, "normal zo") == FAIL)
+  		    return FAIL;
+! 		if (put_foldopen_recurse(fd, wp, &fp->fd_nested,
+! 							     off + fp->fd_top)
+  			== FAIL)
+  		    return FAIL;
++ 		/* close the parent when needed */
++ 		if (fp->fd_flags == FD_CLOSED)
++ 		{
++ 		    if (put_fold_open_close(fd, fp, off) == FAIL)
++ 			return FAIL;
++ 		}
++ 	    }
++ 	    else
++ 	    {
++ 		/* Open or close the leaf according to the window foldlevel.
++ 		 * Do not close a leaf that is already closed, as it will close
++ 		 * the parent. */
++ 		level = foldLevelWin(wp, off + fp->fd_top);
++ 		if ((fp->fd_flags == FD_CLOSED && wp->w_p_fdl >= level)
++ 			|| (fp->fd_flags != FD_CLOSED && wp->w_p_fdl < level))
++ 		if (put_fold_open_close(fd, fp, off) == FAIL)
++ 		    return FAIL;
+  	    }
+  	}
+  	++fp;
+      }
+  
+      return OK;
+  }
++ 
++ /* put_fold_open_close() {{{2 */
++ /*
++  * Write the open or close command to "fd".
++  * Returns FAIL when writing failed.
++  */
++     static int
++ put_fold_open_close(fd, fp, off)
++     FILE	*fd;
++     fold_T	*fp;
++     linenr_T	off;
++ {
++     if (fprintf(fd, "%ld", fp->fd_top + off) < 0
++ 	    || put_eol(fd) == FAIL
++ 	    || fprintf(fd, "normal z%c",
++ 			   fp->fd_flags == FD_CLOSED ? 'c' : 'o') < 0
++ 	    || put_eol(fd) == FAIL)
++ 	return FAIL;
++ 
++     return OK;
++ }
+  #endif /* FEAT_SESSION */
+  
+  /* }}}1 */
+*** ../vim-7.3.461/src/version.c	2012-02-29 18:22:03.000000000 +0100
+--- src/version.c	2012-02-29 18:40:43.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     462,
+  /**/
+
+-- 
+~
+~
+~
+".signature" 4 lines, 50 characters written
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.463 b/source/ap/vim/patches/7.3.463
new file mode 100644
index 00000000..1e7cb238
--- /dev/null
+++ b/source/ap/vim/patches/7.3.463
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.463
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.463
+Problem:    When using ":s///c" the cursor is moved away from the match.
+	    (Lawman)
+Solution:   Don't move the cursor when do_ask is set. (Christian Brabandt)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.462/src/ex_cmds.c	2012-02-22 14:58:24.000000000 +0100
+--- src/ex_cmds.c	2012-03-07 14:54:21.000000000 +0100
+***************
+*** 5151,5160 ****
+  
+  	if (!global_busy)
+  	{
+! 	    if (endcolumn)
+! 		coladvance((colnr_T)MAXCOL);
+! 	    else
+! 		beginline(BL_WHITE | BL_FIX);
+  	    if (!do_sub_msg(do_count) && do_ask)
+  		MSG("");
+  	}
+--- 5151,5163 ----
+  
+  	if (!global_busy)
+  	{
+! 	    if (!do_ask)  /* when interactive leave cursor on the match */
+! 	    {
+! 		if (endcolumn)
+! 		    coladvance((colnr_T)MAXCOL);
+! 		else
+! 		    beginline(BL_WHITE | BL_FIX);
+! 	    }
+  	    if (!do_sub_msg(do_count) && do_ask)
+  		MSG("");
+  	}
+*** ../vim-7.3.462/src/version.c	2012-02-29 19:19:57.000000000 +0100
+--- src/version.c	2012-03-07 14:55:39.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     463,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+151. You find yourself engaged to someone you've never actually met,
+     except through e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.464 b/source/ap/vim/patches/7.3.464
new file mode 100644
index 00000000..fdfdfffc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.464
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.464
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.464
+Problem:    Compiler warning for sprintf.
+Solution:   Put the length in a variable. (Dominique Pelle)
+Files:	    src/version.c
+
+
+*** ../vim-7.3.463/src/version.c	2012-03-07 14:57:50.000000000 +0100
+--- src/version.c	2012-03-07 17:58:41.000000000 +0100
+***************
+*** 2187,2198 ****
+  	    /* Check for 9.9x or 9.9xx, alpha/beta version */
+  	    if (isalpha((int)vers[3]))
+  	    {
+! 		if (isalpha((int)vers[4]))
+! 		    sprintf((char *)vers + 5, ".%d%s", highest_patch(),
+! 							   mediumVersion + 5);
+! 		else
+! 		    sprintf((char *)vers + 4, ".%d%s", highest_patch(),
+! 							   mediumVersion + 4);
+  	    }
+  	    else
+  		sprintf((char *)vers + 3, ".%d", highest_patch());
+--- 2189,2197 ----
+  	    /* Check for 9.9x or 9.9xx, alpha/beta version */
+  	    if (isalpha((int)vers[3]))
+  	    {
+! 		int len = (isalpha((int)vers[4])) ? 5 : 4;
+! 		sprintf((char *)vers + len, ".%d%s", highest_patch(),
+! 							 mediumVersion + len);
+  	    }
+  	    else
+  		sprintf((char *)vers + 3, ".%d", highest_patch());
+*** ../vim-7.3.463/src/version.c	2012-03-07 14:57:50.000000000 +0100
+--- src/version.c	2012-03-07 17:58:41.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     464,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+152. You find yourself falling for someone you've never seen or hardly
+     know, but, boy can he/she TYPE!!!!!!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.465 b/source/ap/vim/patches/7.3.465
new file mode 100644
index 00000000..c4a857ac
--- /dev/null
+++ b/source/ap/vim/patches/7.3.465
@@ -0,0 +1,398 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.465
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.465
+Problem:    Cannot get file name with newline from glob().
+Solution:   Add argument to glob() and expand() to indicate they must return a
+	    list. (Christian Brabandt)
+Files:	    runtime/doc/eval.txt, src/eval.c, src/ex_getln.c, src/vim.h
+
+
+*** ../vim-7.3.464/runtime/doc/eval.txt	2011-12-14 15:32:44.000000000 +0100
+--- runtime/doc/eval.txt	2012-03-07 18:49:26.000000000 +0100
+***************
+*** 1738,1744 ****
+  extend( {expr1}, {expr2} [, {expr3}])
+  				List/Dict insert items of {expr2} into {expr1}
+  exp( {expr})			Float	exponential of {expr}
+! expand( {expr} [, {flag}])	String	expand special keywords in {expr}
+  feedkeys( {string} [, {mode}])	Number	add key sequence to typeahead buffer
+  filereadable( {file})		Number	TRUE if {file} is a readable file
+  filewritable( {file})		Number	TRUE if {file} is a writable file
+--- 1746,1753 ----
+  extend( {expr1}, {expr2} [, {expr3}])
+  				List/Dict insert items of {expr2} into {expr1}
+  exp( {expr})			Float	exponential of {expr}
+! expand( {expr} [, {nosuf} [, {list}]])
+! 				any	expand special keywords in {expr}
+  feedkeys( {string} [, {mode}])	Number	add key sequence to typeahead buffer
+  filereadable( {file})		Number	TRUE if {file} is a readable file
+  filewritable( {file})		Number	TRUE if {file} is a writable file
+***************
+*** 1792,1798 ****
+  getwinposx()			Number	X coord in pixels of GUI Vim window
+  getwinposy()			Number	Y coord in pixels of GUI Vim window
+  getwinvar( {nr}, {varname})	any	variable {varname} in window {nr}
+! glob( {expr} [, {flag}])	String	expand file wildcards in {expr}
+  globpath( {path}, {expr} [, {flag}])
+  				String	do glob({expr}) for all dirs in {path}
+  has( {feature})			Number	TRUE if feature {feature} supported
+--- 1801,1808 ----
+  getwinposx()			Number	X coord in pixels of GUI Vim window
+  getwinposy()			Number	Y coord in pixels of GUI Vim window
+  getwinvar( {nr}, {varname})	any	variable {varname} in window {nr}
+! glob( {expr} [, {nosuf} [, {list}]])
+! 				any	expand file wildcards in {expr}
+  globpath( {path}, {expr} [, {flag}])
+  				String	do glob({expr}) for all dirs in {path}
+  has( {feature})			Number	TRUE if feature {feature} supported
+***************
+*** 2731,2743 ****
+  		{only available when compiled with the |+float| feature}
+  
+  
+! expand({expr} [, {flag}])				*expand()*
+  		Expand wildcards and the following special keywords in {expr}.
+! 		The result is a String.
+  
+! 		When there are several matches, they are separated by <NL>
+! 		characters.  [Note: in version 5.0 a space was used, which
+! 		caused problems when a file name contains a space]
+  
+  		If the expansion fails, the result is an empty string.	A name
+  		for a non-existing file is not included.
+--- 2744,2758 ----
+  		{only available when compiled with the |+float| feature}
+  
+  
+! expand({expr} [, {nosuf} [, {list}]])				*expand()*
+  		Expand wildcards and the following special keywords in {expr}.
+! 		'wildignorecase' applies.
+  
+! 		If {list} is given and it is non-zero, a List will be returned.
+! 		Otherwise the result is a String and when there are several
+! 		matches, they are separated by <NL> characters.  [Note: in
+! 		version 5.0 a space was used, which caused problems when a
+! 		file name contains a space]
+  
+  		If the expansion fails, the result is an empty string.	A name
+  		for a non-existing file is not included.
+***************
+*** 2754,2759 ****
+--- 2769,2775 ----
+  			<abuf>		autocmd buffer number (as a String!)
+  			<amatch>	autocmd matched name
+  			<sfile>		sourced script file name
++ 			<slnum>		sourced script file line number
+  			<cword>		word under the cursor
+  			<cWORD>		WORD under the cursor
+  			<client>	the {clientid} of the last received
+***************
+*** 2790,2799 ****
+  		When {expr} does not start with '%', '#' or '<', it is
+  		expanded like a file name is expanded on the command line.
+  		'suffixes' and 'wildignore' are used, unless the optional
+! 		{flag} argument is given and it is non-zero.  Names for
+! 		non-existing files are included.  The "**" item can be used to
+! 		search in a directory tree.  For example, to find all "README"
+! 		files in the current directory and below: >
+  			:echo expand("**/README")
+  <
+  		Expand() can also be used to expand variables and environment
+--- 2806,2815 ----
+  		When {expr} does not start with '%', '#' or '<', it is
+  		expanded like a file name is expanded on the command line.
+  		'suffixes' and 'wildignore' are used, unless the optional
+! 		{nosuf} argument is given and it is non-zero.
+! 		Names for non-existing files are included.  The "**" item can
+! 		be used to search in a directory tree.  For example, to find
+! 		all "README" files in the current directory and below: >
+  			:echo expand("**/README")
+  <
+  		Expand() can also be used to expand variables and environment
+***************
+*** 3437,3453 ****
+  			:let list_is_on = getwinvar(2, '&list')
+  			:echo "myvar = " . getwinvar(1, 'myvar')
+  <
+! glob({expr} [, {flag}])					*glob()*
+  		Expand the file wildcards in {expr}.  See |wildcards| for the
+  		use of special characters.
+! 		The result is a String.
+! 		When there are several matches, they are separated by <NL>
+! 		characters.
+! 		Unless the optional {flag} argument is given and is non-zero,
+  		the 'suffixes' and 'wildignore' options apply: Names matching
+  		one of the patterns in 'wildignore' will be skipped and
+  		'suffixes' affect the ordering of matches.
+! 		If the expansion fails, the result is an empty string.
+  		A name for a non-existing file is not included.
+  
+  		For most systems backticks can be used to get files names from
+--- 3456,3478 ----
+  			:let list_is_on = getwinvar(2, '&list')
+  			:echo "myvar = " . getwinvar(1, 'myvar')
+  <
+! glob({expr} [, {nosuf} [, {list}]])				*glob()*
+  		Expand the file wildcards in {expr}.  See |wildcards| for the
+  		use of special characters.
+! 
+! 		Unless the optional {nosuf} argument is given and is non-zero,
+  		the 'suffixes' and 'wildignore' options apply: Names matching
+  		one of the patterns in 'wildignore' will be skipped and
+  		'suffixes' affect the ordering of matches.
+! 		'wildignorecase' always applies.
+! 
+! 		When {list} is present and it is non-zero the result is a List
+! 		with all matching files. The advantage of using a List is,
+! 		you also get filenames containing newlines correctly.
+! 		Otherwise the result is a String and when there are several
+! 		matches, they are separated by <NL> characters.
+! 
+! 		If the expansion fails, the result is an empty String or List.
+  		A name for a non-existing file is not included.
+  
+  		For most systems backticks can be used to get files names from
+*** ../vim-7.3.464/src/eval.c	2012-02-11 20:44:01.000000000 +0100
+--- src/eval.c	2012-03-07 19:08:36.000000000 +0100
+***************
+*** 7852,7858 ****
+  #ifdef FEAT_FLOAT
+      {"exp",		1, 1, f_exp},
+  #endif
+!     {"expand",		1, 2, f_expand},
+      {"extend",		2, 3, f_extend},
+      {"feedkeys",	1, 2, f_feedkeys},
+      {"file_readable",	1, 1, f_filereadable},	/* obsolete */
+--- 7852,7858 ----
+  #ifdef FEAT_FLOAT
+      {"exp",		1, 1, f_exp},
+  #endif
+!     {"expand",		1, 3, f_expand},
+      {"extend",		2, 3, f_extend},
+      {"feedkeys",	1, 2, f_feedkeys},
+      {"file_readable",	1, 1, f_filereadable},	/* obsolete */
+***************
+*** 7903,7909 ****
+      {"getwinposx",	0, 0, f_getwinposx},
+      {"getwinposy",	0, 0, f_getwinposy},
+      {"getwinvar",	2, 2, f_getwinvar},
+!     {"glob",		1, 2, f_glob},
+      {"globpath",	2, 3, f_globpath},
+      {"has",		1, 1, f_has},
+      {"has_key",		2, 2, f_has_key},
+--- 7903,7909 ----
+      {"getwinposx",	0, 0, f_getwinposx},
+      {"getwinposy",	0, 0, f_getwinposy},
+      {"getwinvar",	2, 2, f_getwinvar},
+!     {"glob",		1, 3, f_glob},
+      {"globpath",	2, 3, f_globpath},
+      {"has",		1, 1, f_has},
+      {"has_key",		2, 2, f_has_key},
+***************
+*** 10019,10032 ****
+      int		options = WILD_SILENT|WILD_USE_NL|WILD_LIST_NOTFOUND;
+      expand_T	xpc;
+      int		error = FALSE;
+  
+      rettv->v_type = VAR_STRING;
+      s = get_tv_string(&argvars[0]);
+      if (*s == '%' || *s == '#' || *s == '<')
+      {
+  	++emsg_off;
+! 	rettv->vval.v_string = eval_vars(s, s, &len, NULL, &errormsg, NULL);
+  	--emsg_off;
+      }
+      else
+      {
+--- 10019,10051 ----
+      int		options = WILD_SILENT|WILD_USE_NL|WILD_LIST_NOTFOUND;
+      expand_T	xpc;
+      int		error = FALSE;
++     char_u	*result;
+  
+      rettv->v_type = VAR_STRING;
++     if (argvars[1].v_type != VAR_UNKNOWN
++ 	    && argvars[2].v_type != VAR_UNKNOWN
++ 	    && get_tv_number_chk(&argvars[2], &error)
++ 	    && !error)
++     {
++ 	rettv->v_type = VAR_LIST;
++ 	rettv->vval.v_list = NULL;
++     }
++ 
+      s = get_tv_string(&argvars[0]);
+      if (*s == '%' || *s == '#' || *s == '<')
+      {
+  	++emsg_off;
+! 	result = eval_vars(s, s, &len, NULL, &errormsg, NULL);
+  	--emsg_off;
++ 	if (rettv->v_type == VAR_LIST)
++ 	{
++ 	    if (rettv_list_alloc(rettv) != FAIL && result != NULL)
++ 		list_append_string(rettv->vval.v_list, result, -1);
++ 	    else
++ 		vim_free(result);
++ 	}
++ 	else
++ 	    rettv->vval.v_string = result;
+      }
+      else
+      {
+***************
+*** 10041,10047 ****
+  	    xpc.xp_context = EXPAND_FILES;
+  	    if (p_wic)
+  		options += WILD_ICASE;
+! 	    rettv->vval.v_string = ExpandOne(&xpc, s, NULL, options, WILD_ALL);
+  	}
+  	else
+  	    rettv->vval.v_string = NULL;
+--- 10060,10077 ----
+  	    xpc.xp_context = EXPAND_FILES;
+  	    if (p_wic)
+  		options += WILD_ICASE;
+! 	    if (rettv->v_type == VAR_STRING)
+! 		rettv->vval.v_string = ExpandOne(&xpc, s, NULL,
+! 							   options, WILD_ALL);
+! 	    else if (rettv_list_alloc(rettv) != FAIL)
+! 	    {
+! 		int i;
+! 
+! 		ExpandOne(&xpc, s, NULL, options, WILD_ALL_KEEP);
+! 		for (i = 0; i < xpc.xp_numfiles; i++)
+! 		    list_append_string(rettv->vval.v_list, xpc.xp_files[i], -1);
+! 		ExpandCleanup(&xpc);
+! 	    }
+  	}
+  	else
+  	    rettv->vval.v_string = NULL;
+***************
+*** 11833,11851 ****
+      int		error = FALSE;
+  
+      /* When the optional second argument is non-zero, don't remove matches
+!     * for 'wildignore' and don't put matches for 'suffixes' at the end. */
+!     if (argvars[1].v_type != VAR_UNKNOWN
+! 				&& get_tv_number_chk(&argvars[1], &error))
+! 	options |= WILD_KEEP_ALL;
+      rettv->v_type = VAR_STRING;
+      if (!error)
+      {
+  	ExpandInit(&xpc);
+  	xpc.xp_context = EXPAND_FILES;
+  	if (p_wic)
+  	    options += WILD_ICASE;
+! 	rettv->vval.v_string = ExpandOne(&xpc, get_tv_string(&argvars[0]),
+  						     NULL, options, WILD_ALL);
+      }
+      else
+  	rettv->vval.v_string = NULL;
+--- 11863,11901 ----
+      int		error = FALSE;
+  
+      /* When the optional second argument is non-zero, don't remove matches
+!      * for 'wildignore' and don't put matches for 'suffixes' at the end. */
+      rettv->v_type = VAR_STRING;
++     if (argvars[1].v_type != VAR_UNKNOWN)
++     {
++ 	if (get_tv_number_chk(&argvars[1], &error))
++ 	    options |= WILD_KEEP_ALL;
++ 	if (argvars[2].v_type != VAR_UNKNOWN
++ 				    && get_tv_number_chk(&argvars[2], &error))
++ 	{
++ 	    rettv->v_type = VAR_LIST;
++ 	    rettv->vval.v_list = NULL;
++ 	}
++     }
+      if (!error)
+      {
+  	ExpandInit(&xpc);
+  	xpc.xp_context = EXPAND_FILES;
+  	if (p_wic)
+  	    options += WILD_ICASE;
+! 	if (rettv->v_type == VAR_STRING)
+! 	    rettv->vval.v_string = ExpandOne(&xpc, get_tv_string(&argvars[0]),
+  						     NULL, options, WILD_ALL);
++ 	else if (rettv_list_alloc(rettv) != FAIL)
++ 	{
++ 	  int i;
++ 
++ 	  ExpandOne(&xpc, get_tv_string(&argvars[0]),
++ 						NULL, options, WILD_ALL_KEEP);
++ 	  for (i = 0; i < xpc.xp_numfiles; i++)
++ 	      list_append_string(rettv->vval.v_list, xpc.xp_files[i], -1);
++ 
++ 	  ExpandCleanup(&xpc);
++ 	}
+      }
+      else
+  	rettv->vval.v_string = NULL;
+*** ../vim-7.3.464/src/ex_getln.c	2012-02-22 17:58:00.000000000 +0100
+--- src/ex_getln.c	2012-03-07 19:07:01.000000000 +0100
+***************
+*** 3461,3466 ****
+--- 3461,3467 ----
+   * mode = WILD_PREV:	    use previous match in multiple match, wrap to first
+   * mode = WILD_ALL:	    return all matches concatenated
+   * mode = WILD_LONGEST:	    return longest matched part
++  * mode = WILD_ALL_KEEP:    get all matches, keep matches
+   *
+   * options = WILD_LIST_NOTFOUND:    list entries without a match
+   * options = WILD_HOME_REPLACE:	    do home_replace() for buffer names
+***************
+*** 3584,3590 ****
+  	    /*
+  	     * Check for matching suffixes in file names.
+  	     */
+! 	    if (mode != WILD_ALL && mode != WILD_LONGEST)
+  	    {
+  		if (xp->xp_numfiles)
+  		    non_suf_match = xp->xp_numfiles;
+--- 3585,3592 ----
+  	    /*
+  	     * Check for matching suffixes in file names.
+  	     */
+! 	    if (mode != WILD_ALL && mode != WILD_ALL_KEEP
+! 						      && mode != WILD_LONGEST)
+  	    {
+  		if (xp->xp_numfiles)
+  		    non_suf_match = xp->xp_numfiles;
+*** ../vim-7.3.464/src/vim.h	2011-07-27 17:31:42.000000000 +0200
+--- src/vim.h	2012-03-07 19:03:43.000000000 +0100
+***************
+*** 794,799 ****
+--- 794,800 ----
+  #define WILD_PREV		5
+  #define WILD_ALL		6
+  #define WILD_LONGEST		7
++ #define WILD_ALL_KEEP		8
+  
+  #define WILD_LIST_NOTFOUND	1
+  #define WILD_HOME_REPLACE	2
+*** ../vim-7.3.464/src/version.c	2012-03-07 18:04:00.000000000 +0100
+--- src/version.c	2012-03-07 19:14:39.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     465,
+  /**/
+
+-- 
+Although the scythe isn't pre-eminent among the weapons of war, anyone who
+has been on the wrong end of, say, a peasants' revolt will know that in
+skilled hands it is fearsome.
+					-- (Terry Pratchett, Mort)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.466 b/source/ap/vim/patches/7.3.466
new file mode 100644
index 00000000..0dc42934
--- /dev/null
+++ b/source/ap/vim/patches/7.3.466
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.466
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.466
+Problem:    Get ml_get error when ":behave mswin" was used and selecting
+	    several lines.  (A. Sinan Unur)
+Solution:   Adjust the end of the operation. (Christian Brabandt)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.465/src/ops.c	2012-02-22 17:37:55.000000000 +0100
+--- src/ops.c	2012-03-07 19:27:08.000000000 +0100
+***************
+*** 1957,1962 ****
+--- 1957,1965 ----
+  	    ++curwin->w_cursor.lnum;
+  	    del_lines((long)(oap->line_count - 2), FALSE);
+  
++ 	    if (delete_last_line)
++ 		oap->end.lnum = curbuf->b_ml.ml_line_count;
++ 
+  	    n = (oap->end.col + 1 - !oap->inclusive);
+  	    if (oap->inclusive && delete_last_line
+  		    && n > (int)STRLEN(ml_get(oap->end.lnum)))
+*** ../vim-7.3.465/src/version.c	2012-03-07 19:16:49.000000000 +0100
+--- src/version.c	2012-03-07 19:29:52.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     466,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+153. You find yourself staring at your "inbox" waiting for new e-mail
+     to arrive.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.467 b/source/ap/vim/patches/7.3.467
new file mode 100644
index 00000000..7764217c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.467
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.467
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.467
+Problem:    Cursor positioned wrong at the command line when regaining focus
+	    and using some input method.
+Solution:   Do not position the cursor in command line mode.
+Files:	    src/mbyte.c
+
+
+*** ../vim-7.3.466/src/mbyte.c	2011-12-08 15:09:46.000000000 +0100
+--- src/mbyte.c	2012-03-07 19:36:44.000000000 +0100
+***************
+*** 4504,4510 ****
+      vgetc_busy = TRUE;
+      showmode();
+      vgetc_busy = old_vgetc_busy;
+!     setcursor();
+      out_flush();
+  }
+  
+--- 4504,4511 ----
+      vgetc_busy = TRUE;
+      showmode();
+      vgetc_busy = old_vgetc_busy;
+!     if ((State & NORMAL) || (State & INSERT))
+! 	setcursor();
+      out_flush();
+  }
+  
+*** ../vim-7.3.466/src/version.c	2012-03-07 19:30:32.000000000 +0100
+--- src/version.c	2012-03-07 19:38:22.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     467,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+154. You fondle your mouse.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.468 b/source/ap/vim/patches/7.3.468
new file mode 100644
index 00000000..e078f9ea
--- /dev/null
+++ b/source/ap/vim/patches/7.3.468
@@ -0,0 +1,144 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.468
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.468
+Problem:    For some compilers the error file is not easily readable.
+Solution:   Use QuickFixCmdPre for more commands. (Marcin Szamotulski)
+Files:	    runtime/doc/autocmd.txt, src/quickfix.c
+
+
+*** ../vim-7.3.467/runtime/doc/autocmd.txt	2012-02-12 20:13:55.000000000 +0100
+--- runtime/doc/autocmd.txt	2012-03-07 20:07:23.000000000 +0100
+***************
+*** 695,701 ****
+  QuickFixCmdPre			Before a quickfix command is run (|:make|,
+  				|:lmake|, |:grep|, |:lgrep|, |:grepadd|,
+  				|:lgrepadd|, |:vimgrep|, |:lvimgrep|,
+! 				|:vimgrepadd|, |:lvimgrepadd|, |:cscope|).
+  				The pattern is matched against the command
+  				being run.  When |:grep| is used but 'grepprg'
+  				is set to "internal" it still matches "grep".
+--- 699,708 ----
+  QuickFixCmdPre			Before a quickfix command is run (|:make|,
+  				|:lmake|, |:grep|, |:lgrep|, |:grepadd|,
+  				|:lgrepadd|, |:vimgrep|, |:lvimgrep|,
+! 				|:vimgrepadd|, |:lvimgrepadd|, |:cscope|,
+! 				|:cfile|, |:cgetfile|, |:caddfile|, |:lfile|,
+! 				|:lgetfile|, |:laddfile|, |:helpgrep|,
+! 				|:lhelpgrep|).
+  				The pattern is matched against the command
+  				being run.  When |:grep| is used but 'grepprg'
+  				is set to "internal" it still matches "grep".
+***************
+*** 706,712 ****
+  							*QuickFixCmdPost*
+  QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
+  				command is run, before jumping to the first
+! 				location.  See |QuickFixCmdPost-example|.
+  							*RemoteReply*
+  RemoteReply			When a reply from a Vim that functions as
+  				server was received |server2client()|.  The
+--- 713,722 ----
+  							*QuickFixCmdPost*
+  QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
+  				command is run, before jumping to the first
+! 				location. For |:cfile| and |:lfile| commands
+! 				it is run after error file is read and before
+! 				moving to the first error. 
+! 				See |QuickFixCmdPost-example|.
+  							*RemoteReply*
+  RemoteReply			When a reply from a Vim that functions as
+  				server was received |server2client()|.  The
+*** ../vim-7.3.467/src/quickfix.c	2012-02-22 14:58:24.000000000 +0100
+--- src/quickfix.c	2012-03-07 20:10:07.000000000 +0100
+***************
+*** 2995,3005 ****
+  {
+      win_T	*wp = NULL;
+      qf_info_T	*qi = &ql_info;
+  
+      if (eap->cmdidx == CMD_lfile || eap->cmdidx == CMD_lgetfile
+! 	|| eap->cmdidx == CMD_laddfile)
+  	wp = curwin;
+  
+  #ifdef FEAT_BROWSE
+      if (cmdmod.browse)
+      {
+--- 2995,3022 ----
+  {
+      win_T	*wp = NULL;
+      qf_info_T	*qi = &ql_info;
++ #ifdef FEAT_AUTOCMD
++     char_u	*au_name = NULL;
++ #endif
+  
+      if (eap->cmdidx == CMD_lfile || eap->cmdidx == CMD_lgetfile
+! 					       || eap->cmdidx == CMD_laddfile)
+  	wp = curwin;
+  
++ #ifdef FEAT_AUTOCMD
++     switch (eap->cmdidx)
++     {
++ 	case CMD_cfile:	    au_name = (char_u *)"cfile"; break;
++ 	case CMD_cgetfile:  au_name = (char_u *)"cgetfile"; break;
++ 	case CMD_caddfile:  au_name = (char_u *)"caddfile"; break;
++ 	case CMD_lfile:	    au_name = (char_u *)"lfile"; break;
++ 	case CMD_lgetfile:  au_name = (char_u *)"lgetfile"; break;
++ 	case CMD_laddfile:  au_name = (char_u *)"laddfile"; break;
++ 	default: break;
++     }
++     if (au_name != NULL)
++ 	apply_autocmds(EVENT_QUICKFIXCMDPRE, au_name, NULL, FALSE, curbuf);
++ #endif
+  #ifdef FEAT_BROWSE
+      if (cmdmod.browse)
+      {
+***************
+*** 3031,3040 ****
+--- 3048,3069 ----
+  				  && (eap->cmdidx == CMD_cfile
+  					     || eap->cmdidx == CMD_lfile))
+      {
++ #ifdef FEAT_AUTOCMD
++ 	if (au_name != NULL)
++ 	    apply_autocmds(EVENT_QUICKFIXCMDPOST, au_name, NULL, FALSE, curbuf);
++ #endif
+  	if (wp != NULL)
+  	    qi = GET_LOC_LIST(wp);
+  	qf_jump(qi, 0, 0, eap->forceit);	/* display first error */
+      }
++ 
++     else
++     {
++ #ifdef FEAT_AUTOCMD
++ 	if (au_name != NULL)
++ 	    apply_autocmds(EVENT_QUICKFIXCMDPOST, au_name, NULL, FALSE, curbuf);
++ #endif
++     }
+  }
+  
+  /*
+*** ../vim-7.3.467/src/version.c	2012-03-07 19:38:52.000000000 +0100
+--- src/version.c	2012-03-07 20:11:54.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     468,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+155. You forget to eat because you're too busy surfing the net.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.469 b/source/ap/vim/patches/7.3.469
new file mode 100644
index 00000000..77ca4a05
--- /dev/null
+++ b/source/ap/vim/patches/7.3.469
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.469
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.469
+Problem:    Compiler warning for unused argument without some features.
+Solution:   Add UNUSED.
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.468/src/buffer.c	2012-02-22 19:13:00.000000000 +0100
+--- src/buffer.c	2012-03-07 22:30:56.000000000 +0100
+***************
+*** 329,335 ****
+      win_T	*win;		/* if not NULL, set b_last_cursor */
+      buf_T	*buf;
+      int		action;
+!     int		abort_if_last;
+  {
+  #ifdef FEAT_AUTOCMD
+      int		is_curbuf;
+--- 329,335 ----
+      win_T	*win;		/* if not NULL, set b_last_cursor */
+      buf_T	*buf;
+      int		action;
+!     int		abort_if_last UNUSED;
+  {
+  #ifdef FEAT_AUTOCMD
+      int		is_curbuf;
+*** ../vim-7.3.468/src/version.c	2012-03-07 20:13:44.000000000 +0100
+--- src/version.c	2012-03-07 22:51:54.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     469,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+157. You fum through a magazine, you first check to see if it has a web
+     address.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.470 b/source/ap/vim/patches/7.3.470
new file mode 100644
index 00000000..80bec156
--- /dev/null
+++ b/source/ap/vim/patches/7.3.470
@@ -0,0 +1,67 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.470
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.470
+Problem:    Test 62 fails when compiled without GUI and X11.
+Solution:   Don't test :drop when it is not supported.
+Files:	    src/testdir/test62.in
+
+
+*** ../vim-7.3.469/src/testdir/test62.in	2012-02-22 19:13:00.000000000 +0100
+--- src/testdir/test62.in	2012-03-07 22:46:17.000000000 +0100
+***************
+*** 49,55 ****
+  :tabclose
+  :call append(line('$'), test_status)
+  :"
+! :"
+  :" Test for ":tab drop exist-file" to keep current window.
+  :sp test1
+  :tab drop test1
+--- 49,55 ----
+  :tabclose
+  :call append(line('$'), test_status)
+  :"
+! :if has('gui') || has('clientserver')
+  :" Test for ":tab drop exist-file" to keep current window.
+  :sp test1
+  :tab drop test1
+***************
+*** 85,90 ****
+--- 85,96 ----
+  :tabclose
+  :q
+  :call append(line('$'), test_status)
++ :else
++ :" :drop not supported
++ :call append(line('$'), 'tab drop 1: pass')
++ :call append(line('$'), 'tab drop 2: pass')
++ :call append(line('$'), 'tab drop 3: pass')
++ :endif
+  :"
+  :"
+  :/^Results/,$w! test.out
+*** ../vim-7.3.469/src/version.c	2012-03-07 22:52:30.000000000 +0100
+--- src/version.c	2012-03-07 22:53:40.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     470,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+158. You get a tuner card so you can watch TV while surfing.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.471 b/source/ap/vim/patches/7.3.471
new file mode 100644
index 00000000..be814324
--- /dev/null
+++ b/source/ap/vim/patches/7.3.471
@@ -0,0 +1,92 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.471
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.471
+Problem:    Can't abort listing placed signs.
+Solution:   Check "got_int". (Christian Brabandt)
+Files:	    src/buffer.c, src/ex_cmds.c
+
+
+*** ../vim-7.3.470/src/buffer.c	2012-03-07 22:52:30.000000000 +0100
+--- src/buffer.c	2012-03-16 13:54:48.000000000 +0100
+***************
+*** 5557,5563 ****
+  	buf = firstbuf;
+      else
+  	buf = rbuf;
+!     while (buf != NULL)
+      {
+  	if (buf->b_signlist != NULL)
+  	{
+--- 5557,5563 ----
+  	buf = firstbuf;
+      else
+  	buf = rbuf;
+!     while (buf != NULL && !got_int)
+      {
+  	if (buf->b_signlist != NULL)
+  	{
+***************
+*** 5565,5571 ****
+  	    MSG_PUTS_ATTR(lbuf, hl_attr(HLF_D));
+  	    msg_putchar('\n');
+  	}
+! 	for (p = buf->b_signlist; p != NULL; p = p->next)
+  	{
+  	    vim_snprintf(lbuf, BUFSIZ, _("    line=%ld  id=%d  name=%s"),
+  			   (long)p->lnum, p->id, sign_typenr2name(p->typenr));
+--- 5565,5571 ----
+  	    MSG_PUTS_ATTR(lbuf, hl_attr(HLF_D));
+  	    msg_putchar('\n');
+  	}
+! 	for (p = buf->b_signlist; p != NULL && !got_int; p = p->next)
+  	{
+  	    vim_snprintf(lbuf, BUFSIZ, _("    line=%ld  id=%d  name=%s"),
+  			   (long)p->lnum, p->id, sign_typenr2name(p->typenr));
+*** ../vim-7.3.470/src/ex_cmds.c	2012-03-07 14:57:50.000000000 +0100
+--- src/ex_cmds.c	2012-03-16 13:58:50.000000000 +0100
+***************
+*** 6729,6735 ****
+  	if (idx == SIGNCMD_LIST && *arg == NUL)
+  	{
+  	    /* ":sign list": list all defined signs */
+! 	    for (sp = first_sign; sp != NULL; sp = sp->sn_next)
+  		sign_list_defined(sp);
+  	}
+  	else if (*arg == NUL)
+--- 6729,6735 ----
+  	if (idx == SIGNCMD_LIST && *arg == NUL)
+  	{
+  	    /* ":sign list": list all defined signs */
+! 	    for (sp = first_sign; sp != NULL && !got_int; sp = sp->sn_next)
+  		sign_list_defined(sp);
+  	}
+  	else if (*arg == NUL)
+*** ../vim-7.3.470/src/version.c	2012-03-07 22:55:17.000000000 +0100
+--- src/version.c	2012-03-16 13:55:28.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     471,
+  /**/
+
+-- 
+Some of the well know MS-Windows errors:
+	EMEMORY		Memory error caused by..., eh...
+	ELICENSE	Your license has expired, give us more money!
+	EMOUSE		Mouse moved, reinstall Windows
+	EILLEGAL	Illegal error, you are not allowed to see this
+	EVIRUS		Undetectable virus found
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.472 b/source/ap/vim/patches/7.3.472
new file mode 100644
index 00000000..217b2fc9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.472
@@ -0,0 +1,88 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.472
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.472
+Problem:    Crash when using ":redraw" in a BufEnter autocommand and
+            switching to another tab. (驼峰)
+Solution:   Move triggering the the autocommands to after correcting the
+            option values. Also check the row value to be out of bounds.
+            (Christian Brabandt, Sergey Khorev)
+Files:      src/screen.c, src/window.c
+
+
+*** ../vim-7.3.471/src/screen.c	2012-02-04 23:34:57.000000000 +0100
+--- src/screen.c	2012-03-16 18:59:20.000000000 +0100
+***************
+*** 5371,5376 ****
+--- 5371,5382 ----
+  # define CHAR_CELLS 1
+  #endif
+  
++     /* Check for illegal row and col, just in case. */
++     if (row >= Rows)
++ 	row = Rows - 1;
++     if (endcol > Columns)
++ 	endcol = Columns;
++ 
+  # ifdef FEAT_CLIPBOARD
+      clip_may_clear_selection(row, row);
+  # endif
+*** ../vim-7.3.471/src/window.c	2012-02-22 14:58:24.000000000 +0100
+--- src/window.c	2012-03-16 18:43:01.000000000 +0100
+***************
+*** 3676,3688 ****
+      win_enter_ext(tp->tp_curwin, FALSE, TRUE);
+      prevwin = next_prevwin;
+  
+- #ifdef FEAT_AUTOCMD
+-     apply_autocmds(EVENT_TABENTER, NULL, NULL, FALSE, curbuf);
+- 
+-     if (old_curbuf != curbuf)
+- 	apply_autocmds(EVENT_BUFENTER, NULL, NULL, FALSE, curbuf);
+- #endif
+- 
+      last_status(FALSE);		/* status line may appear or disappear */
+      (void)win_comp_pos();	/* recompute w_winrow for all windows */
+      must_redraw = CLEAR;	/* need to redraw everything */
+--- 3676,3681 ----
+***************
+*** 3712,3717 ****
+--- 3705,3718 ----
+      gui_may_update_scrollbars();
+  #endif
+  
++ #ifdef FEAT_AUTOCMD
++     /* Apply autocommands after updating the display, when 'rows' and
++      * 'columns' have been set correctly. */
++     apply_autocmds(EVENT_TABENTER, NULL, NULL, FALSE, curbuf);
++     if (old_curbuf != curbuf)
++ 	apply_autocmds(EVENT_BUFENTER, NULL, NULL, FALSE, curbuf);
++ #endif
++ 
+      redraw_all_later(CLEAR);
+  }
+  
+*** ../vim-7.3.471/src/version.c	2012-03-16 14:32:10.000000000 +0100
+--- src/version.c	2012-03-16 19:02:53.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     472,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+200. You really believe in the concept of a "paperless" office.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.473 b/source/ap/vim/patches/7.3.473
new file mode 100644
index 00000000..571f85da
--- /dev/null
+++ b/source/ap/vim/patches/7.3.473
@@ -0,0 +1,68 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.473
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.473
+Problem:    'cursorbind' does not work correctly in combination with
+	    'virtualedit' set to "all".
+Solution:   Copy coladd. (Gary Johnson)
+Files:	    src/move.c
+
+
+*** ../vim-7.3.472/src/move.c	2012-02-04 23:34:57.000000000 +0100
+--- src/move.c	2012-03-16 19:20:57.000000000 +0100
+***************
+*** 2843,2849 ****
+  do_check_cursorbind()
+  {
+      linenr_T	line = curwin->w_cursor.lnum;
+!     colnr_T	col =  curwin->w_cursor.col;
+      win_T	*old_curwin = curwin;
+      buf_T	*old_curbuf = curbuf;
+      int		restart_edit_save;
+--- 2843,2852 ----
+  do_check_cursorbind()
+  {
+      linenr_T	line = curwin->w_cursor.lnum;
+!     colnr_T	col = curwin->w_cursor.col;
+! # ifdef FEAT_VIRTUALEDIT
+!     colnr_T	coladd = curwin->w_cursor.coladd;
+! # endif
+      win_T	*old_curwin = curwin;
+      buf_T	*old_curbuf = curbuf;
+      int		restart_edit_save;
+***************
+*** 2875,2880 ****
+--- 2878,2886 ----
+  # endif
+  		curwin->w_cursor.lnum = line;
+  	    curwin->w_cursor.col = col;
++ # ifdef FEAT_VIRTUALEDIT
++ 	    curwin->w_cursor.coladd = coladd;
++ # endif
+  
+  	    /* Make sure the cursor is in a valid position.  Temporarily set
+  	     * "restart_edit" to allow the cursor to be beyond the EOL. */
+*** ../vim-7.3.472/src/version.c	2012-03-16 19:07:54.000000000 +0100
+--- src/version.c	2012-03-16 19:24:06.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     473,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+201. When somebody asks you where you are, you tell them in which chat room.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.474 b/source/ap/vim/patches/7.3.474
new file mode 100644
index 00000000..dc6b1d6e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.474
@@ -0,0 +1,62 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.474
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.474
+Problem:    Perl build with gcc 4 fails.
+Solution:   Remove XS() statements. (Yasuhiro Matsumoto)
+Files:	    src/if_perl.xs
+
+
+*** ../vim-7.3.473/src/if_perl.xs	2012-02-12 00:31:47.000000000 +0100
+--- src/if_perl.xs	2012-03-16 19:33:23.000000000 +0100
+***************
+*** 913,936 ****
+  win_T *win_find_nr(int n) { return curwin; }
+  #endif
+  
+- XS(XS_VIM_Msg);
+- XS(XS_VIM_SetOption);
+- XS(XS_VIM_DoCommand);
+- XS(XS_VIM_Eval);
+- XS(XS_VIM_Buffers);
+- XS(XS_VIM_Windows);
+- XS(XS_VIWIN_DESTROY);
+- XS(XS_VIWIN_Buffer);
+- XS(XS_VIWIN_SetHeight);
+- XS(XS_VIWIN_Cursor);
+- XS(XS_VIBUF_DESTROY);
+- XS(XS_VIBUF_Name);
+- XS(XS_VIBUF_Number);
+- XS(XS_VIBUF_Count);
+- XS(XS_VIBUF_Get);
+- XS(XS_VIBUF_Set);
+- XS(XS_VIBUF_Delete);
+- XS(XS_VIBUF_Append);
+  XS(boot_VIM);
+  
+      static void
+--- 913,918 ----
+*** ../vim-7.3.473/src/version.c	2012-03-16 19:24:21.000000000 +0100
+--- src/version.c	2012-03-16 19:28:03.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     474,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+202. You're amazed to find out Spam is a food.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.475 b/source/ap/vim/patches/7.3.475
new file mode 100644
index 00000000..54c27a21
--- /dev/null
+++ b/source/ap/vim/patches/7.3.475
@@ -0,0 +1,98 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.475
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.475
+Problem:    In a terminal with few colors the omnicomplete menu may be hard to
+	    see when using the default colors.
+Solution:   Use more explicit colors. (suggested by Alex Henrie)
+Files:	    src/syntax.c
+
+
+*** ../vim-7.3.474/src/syntax.c	2012-01-10 22:26:12.000000000 +0100
+--- src/syntax.c	2012-03-16 20:14:22.000000000 +0100
+***************
+*** 6516,6523 ****
+  	     "DiffText term=reverse cterm=bold ctermbg=Red gui=bold guibg=Red"),
+  #endif
+  #ifdef FEAT_INS_EXPAND
+- 	CENT("PmenuThumb cterm=reverse",
+- 	     "PmenuThumb cterm=reverse gui=reverse"),
+  	CENT("PmenuSbar ctermbg=Grey",
+  	     "PmenuSbar ctermbg=Grey guibg=Grey"),
+  #endif
+--- 6516,6521 ----
+***************
+*** 6557,6566 ****
+  	     "SpellLocal term=underline ctermbg=Cyan guisp=DarkCyan gui=undercurl"),
+  #endif
+  #ifdef FEAT_INS_EXPAND
+! 	CENT("Pmenu ctermbg=LightMagenta",
+! 	     "Pmenu ctermbg=LightMagenta guibg=LightMagenta"),
+! 	CENT("PmenuSel ctermbg=LightGrey",
+! 	     "PmenuSel ctermbg=LightGrey guibg=Grey"),
+  #endif
+  	CENT("SpecialKey term=bold ctermfg=DarkBlue",
+  	     "SpecialKey term=bold ctermfg=DarkBlue guifg=Blue"),
+--- 6555,6566 ----
+  	     "SpellLocal term=underline ctermbg=Cyan guisp=DarkCyan gui=undercurl"),
+  #endif
+  #ifdef FEAT_INS_EXPAND
+! 	CENT("PmenuThumb ctermbg=Black",
+! 	     "PmenuThumb ctermbg=Black guibg=Black"),
+! 	CENT("Pmenu ctermbg=LightMagenta ctermfg=Black",
+! 	     "Pmenu ctermbg=LightMagenta ctermfg=Black guibg=LightMagenta"),
+! 	CENT("PmenuSel ctermbg=LightGrey ctermfg=Black",
+! 	     "PmenuSel ctermbg=LightGrey ctermfg=Black guibg=Grey"),
+  #endif
+  	CENT("SpecialKey term=bold ctermfg=DarkBlue",
+  	     "SpecialKey term=bold ctermfg=DarkBlue guifg=Blue"),
+***************
+*** 6645,6654 ****
+  	     "SpellLocal term=underline ctermbg=Cyan guisp=Cyan gui=undercurl"),
+  #endif
+  #ifdef FEAT_INS_EXPAND
+! 	CENT("Pmenu ctermbg=Magenta",
+! 	     "Pmenu ctermbg=Magenta guibg=Magenta"),
+! 	CENT("PmenuSel ctermbg=DarkGrey",
+! 	     "PmenuSel ctermbg=DarkGrey guibg=DarkGrey"),
+  #endif
+  	CENT("Title term=bold ctermfg=LightMagenta",
+  	     "Title term=bold ctermfg=LightMagenta gui=bold guifg=Magenta"),
+--- 6645,6656 ----
+  	     "SpellLocal term=underline ctermbg=Cyan guisp=Cyan gui=undercurl"),
+  #endif
+  #ifdef FEAT_INS_EXPAND
+! 	CENT("PmenuThumb ctermbg=White",
+! 	     "PmenuThumb ctermbg=White guibg=White"),
+! 	CENT("Pmenu ctermbg=Magenta ctermfg=Black",
+! 	     "Pmenu ctermbg=Magenta ctermfg=Black guibg=Magenta"),
+! 	CENT("PmenuSel ctermbg=DarkGrey ctermfg=Black",
+! 	     "PmenuSel ctermbg=DarkGrey ctermfg=Black guibg=DarkGrey"),
+  #endif
+  	CENT("Title term=bold ctermfg=LightMagenta",
+  	     "Title term=bold ctermfg=LightMagenta gui=bold guifg=Magenta"),
+*** ../vim-7.3.474/src/version.c	2012-03-16 19:34:43.000000000 +0100
+--- src/version.c	2012-03-16 20:05:35.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     475,
+  /**/
+
+-- 
+Spam seems to be something useful to novices.  Later you realize that
+it's a bunch of indigestable junk that only clogs your system.
+Applies to both the food and the e-mail!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.476 b/source/ap/vim/patches/7.3.476
new file mode 100644
index 00000000..959b906b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.476
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.476
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.476
+Problem:    When selecting a block, using "$" to include the end of each line
+	    and using "A" and typing a backspace strange things happen.
+	    (Yuangchen Xie)
+Solution:   Avoid using a negative length. (Christian Brabandt)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.475/src/ops.c	2012-03-07 19:30:32.000000000 +0100
+--- src/ops.c	2012-03-23 12:22:36.000000000 +0100
+***************
+*** 2602,2608 ****
+  	firstline = ml_get(oap->start.lnum) + bd.textcol;
+  	if (oap->op_type == OP_APPEND)
+  	    firstline += bd.textlen;
+! 	if ((ins_len = (long)STRLEN(firstline) - pre_textlen) > 0)
+  	{
+  	    ins_text = vim_strnsave(firstline, (int)ins_len);
+  	    if (ins_text != NULL)
+--- 2602,2609 ----
+  	firstline = ml_get(oap->start.lnum) + bd.textcol;
+  	if (oap->op_type == OP_APPEND)
+  	    firstline += bd.textlen;
+! 	if (pre_textlen >= 0
+! 		     && (ins_len = (long)STRLEN(firstline) - pre_textlen) > 0)
+  	{
+  	    ins_text = vim_strnsave(firstline, (int)ins_len);
+  	    if (ins_text != NULL)
+*** ../vim-7.3.475/src/version.c	2012-03-16 20:16:42.000000000 +0100
+--- src/version.c	2012-03-23 14:14:49.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     476,
+  /**/
+
+-- 
+"Marriage is a wonderful institution...
+but who wants to live in an institution?"
+ - Groucho Marx
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.477 b/source/ap/vim/patches/7.3.477
new file mode 100644
index 00000000..8030ee65
--- /dev/null
+++ b/source/ap/vim/patches/7.3.477
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.477
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.477
+Problem:    Using ":echo" to output enough lines to scroll, then using "j" and
+	    "k" at the more prompt, displays the command on top of the output.
+	    (Marcin Szamotulski) 
+Solution:   Put the output below the command. (Christian Brabandt)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.476/src/eval.c	2012-03-07 19:16:49.000000000 +0100
+--- src/eval.c	2012-03-23 15:11:30.000000000 +0100
+***************
+*** 20492,20498 ****
+--- 20492,20503 ----
+  		/* Call msg_start() after eval1(), evaluating the expression
+  		 * may cause a message to appear. */
+  		if (eap->cmdidx == CMD_echo)
++ 		{
++ 		    /* Put the output below the command, makes scrolling back
++ 		     * at more prompt work. */
++ 		    msg_didout = TRUE;
+  		    msg_start();
++ 		}
+  	    }
+  	    else if (eap->cmdidx == CMD_echo)
+  		msg_puts_attr((char_u *)" ", echo_attr);
+*** ../vim-7.3.476/src/version.c	2012-03-23 14:16:19.000000000 +0100
+--- src/version.c	2012-03-23 15:13:58.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     477,
+  /**/
+
+-- 
+"Marriage is when a man and woman become as one; the trouble starts
+when they try to decide which one"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.478 b/source/ap/vim/patches/7.3.478
new file mode 100644
index 00000000..bad69ef2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.478
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.478
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.478
+Problem:    Memory leak using the ':rv!' command when reading dictionary or
+	    list global variables i.e. with 'viminfo' containing !.
+Solution:   Free the typeval. (Dominique Pelle)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.477/src/eval.c	2012-03-23 15:18:20.000000000 +0100
+--- src/eval.c	2012-03-23 15:28:42.000000000 +0100
+***************
+*** 22976,22981 ****
+--- 22976,22982 ----
+  		    {
+  			vim_free(tv.vval.v_string);
+  			tv = *etv;
++ 			vim_free(etv);
+  		    }
+  		}
+  
+*** ../vim-7.3.477/src/version.c	2012-03-23 15:18:20.000000000 +0100
+--- src/version.c	2012-03-23 15:29:22.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     478,
+  /**/
+
+-- 
+"Marriage is the process of finding out what kind of man your wife
+would have preferred"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.479 b/source/ap/vim/patches/7.3.479
new file mode 100644
index 00000000..fc256c1f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.479
@@ -0,0 +1,134 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.479
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.479
+Problem:    When 'cursorline' is set the line number highlighting can't be set
+	    separately.
+Solution:   Add "CursorLineNr". (Howard Buchholz)
+Files:	    src/option.c, src/screen.c, src/syntax.c, src/vim.h
+
+
+*** ../vim-7.3.478/src/option.c	2012-02-29 13:51:32.000000000 +0100
+--- src/option.c	2012-03-23 15:44:57.000000000 +0100
+***************
+*** 460,468 ****
+  #if defined(FEAT_DIFF) || defined(FEAT_FOLDING) || defined(FEAT_SPELL) \
+  	|| defined(FEAT_VERTSPLIT) || defined(FEAT_CLIPBOARD) \
+  	|| defined(FEAT_INS_EXPAND) || defined(FEAT_SYN_HL) || defined(FEAT_CONCEAL)
+! # define HIGHLIGHT_INIT "8:SpecialKey,@:NonText,d:Directory,e:ErrorMsg,i:IncSearch,l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,r:Question,s:StatusLine,S:StatusLineNC,c:VertSplit,t:Title,v:Visual,V:VisualNOS,w:WarningMsg,W:WildMenu,f:Folded,F:FoldColumn,A:DiffAdd,C:DiffChange,D:DiffDelete,T:DiffText,>:SignColumn,-:Conceal,B:SpellBad,P:SpellCap,R:SpellRare,L:SpellLocal,+:Pmenu,=:PmenuSel,x:PmenuSbar,X:PmenuThumb,*:TabLine,#:TabLineSel,_:TabLineFill,!:CursorColumn,.:CursorLine,o:ColorColumn"
+  #else
+! # define HIGHLIGHT_INIT "8:SpecialKey,@:NonText,d:Directory,e:ErrorMsg,i:IncSearch,l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,r:Question,s:StatusLine,S:StatusLineNC,t:Title,v:Visual,w:WarningMsg,W:WildMenu,>:SignColumn,*:TabLine,#:TabLineSel,_:TabLineFill"
+  #endif
+  
+  /*
+--- 460,468 ----
+  #if defined(FEAT_DIFF) || defined(FEAT_FOLDING) || defined(FEAT_SPELL) \
+  	|| defined(FEAT_VERTSPLIT) || defined(FEAT_CLIPBOARD) \
+  	|| defined(FEAT_INS_EXPAND) || defined(FEAT_SYN_HL) || defined(FEAT_CONCEAL)
+! # define HIGHLIGHT_INIT "8:SpecialKey,@:NonText,d:Directory,e:ErrorMsg,i:IncSearch,l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,N:CursorLineNr,r:Question,s:StatusLine,S:StatusLineNC,c:VertSplit,t:Title,v:Visual,V:VisualNOS,w:WarningMsg,W:WildMenu,f:Folded,F:FoldColumn,A:DiffAdd,C:DiffChange,D:DiffDelete,T:DiffText,>:SignColumn,-:Conceal,B:SpellBad,P:SpellCap,R:SpellRare,L:SpellLocal,+:Pmenu,=:PmenuSel,x:PmenuSbar,X:PmenuThumb,*:TabLine,#:TabLineSel,_:TabLineFill,!:CursorColumn,.:CursorLine,o:ColorColumn"
+  #else
+! # define HIGHLIGHT_INIT "8:SpecialKey,@:NonText,d:Directory,e:ErrorMsg,i:IncSearch,l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,N:CursorLineNr,r:Question,s:StatusLine,S:StatusLineNC,t:Title,v:Visual,w:WarningMsg,W:WildMenu,>:SignColumn,*:TabLine,#:TabLineSel,_:TabLineFill"
+  #endif
+  
+  /*
+*** ../vim-7.3.478/src/screen.c	2012-03-16 19:07:54.000000000 +0100
+--- src/screen.c	2012-03-23 16:09:15.000000000 +0100
+***************
+*** 3501,3509 ****
+  		    char_attr = hl_attr(HLF_N);
+  #ifdef FEAT_SYN_HL
+  		    /* When 'cursorline' is set highlight the line number of
+! 		     * the current line differently. */
+  		    if (wp->w_p_cul && lnum == wp->w_cursor.lnum)
+! 			char_attr = hl_combine_attr(hl_attr(HLF_CUL), char_attr);
+  #endif
+  		}
+  	    }
+--- 3501,3511 ----
+  		    char_attr = hl_attr(HLF_N);
+  #ifdef FEAT_SYN_HL
+  		    /* When 'cursorline' is set highlight the line number of
+! 		     * the current line differently.
+! 		     * TODO: Can we use CursorLine instead of CursorLineNr
+! 		     * when CursorLineNr isn't set? */
+  		    if (wp->w_p_cul && lnum == wp->w_cursor.lnum)
+! 			char_attr = hl_attr(HLF_CLN);
+  #endif
+  		}
+  	    }
+*** ../vim-7.3.478/src/syntax.c	2012-03-16 20:16:42.000000000 +0100
+--- src/syntax.c	2012-03-23 16:23:57.000000000 +0100
+***************
+*** 6538,6543 ****
+--- 6538,6545 ----
+  	     "Directory term=bold ctermfg=DarkBlue guifg=Blue"),
+  	CENT("LineNr term=underline ctermfg=Brown",
+  	     "LineNr term=underline ctermfg=Brown guifg=Brown"),
++ 	CENT("CursorLineNr term=bold ctermfg=Brown",
++ 	     "CursorLineNr term=bold ctermfg=Brown gui=bold guifg=Brown"),
+  	CENT("MoreMsg term=bold ctermfg=DarkGreen",
+  	     "MoreMsg term=bold ctermfg=DarkGreen gui=bold guifg=SeaGreen"),
+  	CENT("Question term=standout ctermfg=DarkGreen",
+***************
+*** 6626,6631 ****
+--- 6628,6635 ----
+  	     "Directory term=bold ctermfg=LightCyan guifg=Cyan"),
+  	CENT("LineNr term=underline ctermfg=Yellow",
+  	     "LineNr term=underline ctermfg=Yellow guifg=Yellow"),
++ 	CENT("CursorLineNr term=bold ctermfg=Yellow",
++ 	     "CursorLineNr term=bold ctermfg=Yellow gui=bold guifg=Yellow"),
+  	CENT("MoreMsg term=bold ctermfg=LightGreen",
+  	     "MoreMsg term=bold ctermfg=LightGreen gui=bold guifg=SeaGreen"),
+  	CENT("Question term=standout ctermfg=LightGreen",
+*** ../vim-7.3.478/src/vim.h	2012-03-07 19:16:49.000000000 +0100
+--- src/vim.h	2012-03-23 15:44:57.000000000 +0100
+***************
+*** 1318,1323 ****
+--- 1318,1324 ----
+      , HLF_M	    /* "--More--" message */
+      , HLF_CM	    /* Mode (e.g., "-- INSERT --") */
+      , HLF_N	    /* line number for ":number" and ":#" commands */
++     , HLF_CLN	    /* current line number */
+      , HLF_R	    /* return to continue message and yes/no questions */
+      , HLF_S	    /* status lines */
+      , HLF_SNC	    /* status lines of not-current windows */
+***************
+*** 1355,1361 ****
+  /* The HL_FLAGS must be in the same order as the HLF_ enums!
+   * When changing this also adjust the default for 'highlight'. */
+  #define HL_FLAGS {'8', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \
+! 		  'n', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \
+  		  'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \
+  		  'B', 'P', 'R', 'L', \
+  		  '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o'}
+--- 1356,1362 ----
+  /* The HL_FLAGS must be in the same order as the HLF_ enums!
+   * When changing this also adjust the default for 'highlight'. */
+  #define HL_FLAGS {'8', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \
+! 		  'n', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \
+  		  'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \
+  		  'B', 'P', 'R', 'L', \
+  		  '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o'}
+*** ../vim-7.3.478/src/version.c	2012-03-23 15:36:57.000000000 +0100
+--- src/version.c	2012-03-23 16:16:41.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     479,
+  /**/
+
+-- 
+If you're sending someone Styrofoam, what do you pack it in?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.480 b/source/ap/vim/patches/7.3.480
new file mode 100644
index 00000000..6d1e21de
--- /dev/null
+++ b/source/ap/vim/patches/7.3.480
@@ -0,0 +1,237 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.480
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.480
+Problem:    When using ":qa" and there is a changed buffer picking the buffer
+	    to jump to is not very good.
+Solution:   Consider current and other tab pages. (Hirohito Higashi)
+Files:	    src/ex_cmds2.c
+
+
+*** ../vim-7.3.479/src/ex_cmds2.c	2012-02-22 18:29:29.000000000 +0100
+--- src/ex_cmds2.c	2012-03-23 17:01:31.000000000 +0100
+***************
+*** 1569,1574 ****
+--- 1569,1594 ----
+  		|| forceit);
+  }
+  
++ static void add_bufnum __ARGS((int *bufnrs, int *bufnump, int nr));
++ 
++ /*
++  * Add a buffer number to "bufnrs", unless it's already there.
++  */
++     static void
++ add_bufnum(bufnrs, bufnump, nr)
++     int	    *bufnrs;
++     int	    *bufnump;
++     int	    nr;
++ {
++     int i;
++ 
++     for (i = 0; i < *bufnump; ++i)
++ 	if (bufnrs[i] == nr)
++ 	    return;
++     bufnrs[*bufnump] = nr;
++     *bufnump = *bufnump + 1;
++ }
++ 
+  /*
+   * Return TRUE if any buffer was changed and cannot be abandoned.
+   * That changed buffer becomes the current buffer.
+***************
+*** 1577,1608 ****
+  check_changed_any(hidden)
+      int		hidden;		/* Only check hidden buffers */
+  {
+      buf_T	*buf;
+      int		save;
+  #ifdef FEAT_WINDOWS
+      win_T	*wp;
+  #endif
+  
+!     for (;;)
+      {
+! 	/* check curbuf first: if it was changed we can't abandon it */
+! 	if (!hidden && curbufIsChanged())
+! 	    buf = curbuf;
+! 	else
+  	{
+! 	    for (buf = firstbuf; buf != NULL; buf = buf->b_next)
+! 		if ((!hidden || buf->b_nwindows == 0) && bufIsChanged(buf))
+! 		    break;
+  	}
+- 	if (buf == NULL)    /* No buffers changed */
+- 	    return FALSE;
+- 
+- 	/* Try auto-writing the buffer.  If this fails but the buffer no
+- 	 * longer exists it's not changed, that's OK. */
+- 	if (check_changed(buf, p_awa, TRUE, FALSE, TRUE) && buf_valid(buf))
+- 	    break;	    /* didn't save - still changes */
+      }
+  
+      exiting = FALSE;
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+      /*
+--- 1597,1660 ----
+  check_changed_any(hidden)
+      int		hidden;		/* Only check hidden buffers */
+  {
++     int		ret = FALSE;
+      buf_T	*buf;
+      int		save;
++     int		i;
++     int		bufnum = 0;
++     int		bufcount = 0;
++     int		*bufnrs;
+  #ifdef FEAT_WINDOWS
++     tabpage_T   *tp;
+      win_T	*wp;
+  #endif
+  
+!     for (buf = firstbuf; buf != NULL; buf = buf->b_next)
+! 	++bufcount;
+! 
+!     if (bufcount == 0)
+! 	return FALSE;
+! 
+!     bufnrs = (int *)alloc(sizeof(int) * bufcount);
+!     if (bufnrs == NULL)
+! 	return FALSE;
+! 
+!     /* curbuf */
+!     bufnrs[bufnum++] = curbuf->b_fnum;
+! #ifdef FEAT_WINDOWS
+!     /* buf in curtab */
+!     FOR_ALL_WINDOWS(wp)
+! 	if (wp->w_buffer != curbuf)
+! 	    add_bufnum(bufnrs, &bufnum, wp->w_buffer->b_fnum);
+! 
+!     /* buf in other tab */
+!     for (tp = first_tabpage; tp != NULL; tp = tp->tp_next)
+! 	if (tp != curtab)
+! 	    for (wp = tp->tp_firstwin; wp != NULL; wp = wp->w_next)
+! 		add_bufnum(bufnrs, &bufnum, wp->w_buffer->b_fnum);
+! #endif
+!     /* any other buf */
+!     for (buf = firstbuf; buf != NULL; buf = buf->b_next)
+! 	add_bufnum(bufnrs, &bufnum, buf->b_fnum);
+! 
+!     for (i = 0; i < bufnum; ++i)
+      {
+! 	buf = buflist_findnr(bufnrs[i]);
+! 	if (buf == NULL)
+! 	    continue;
+! 	if ((!hidden || buf->b_nwindows == 0) && bufIsChanged(buf))
+  	{
+! 	    /* Try auto-writing the buffer.  If this fails but the buffer no
+! 	    * longer exists it's not changed, that's OK. */
+! 	    if (check_changed(buf, p_awa, TRUE, FALSE, TRUE) && buf_valid(buf))
+! 		break;	    /* didn't save - still changes */
+  	}
+      }
+  
++     if (i >= bufnum)
++ 	goto theend;
++ 
++     ret = TRUE;
+      exiting = FALSE;
+  #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
+      /*
+***************
+*** 1635,1658 ****
+  #ifdef FEAT_WINDOWS
+      /* Try to find a window that contains the buffer. */
+      if (buf != curbuf)
+! 	for (wp = firstwin; wp != NULL; wp = wp->w_next)
+  	    if (wp->w_buffer == buf)
+  	    {
+! 		win_goto(wp);
+  # ifdef FEAT_AUTOCMD
+  		/* Paranoia: did autocms wipe out the buffer with changes? */
+  		if (!buf_valid(buf))
+! 		    return TRUE;
+  # endif
+! 		break;
+  	    }
+  #endif
+  
+      /* Open the changed buffer in the current window. */
+      if (buf != curbuf)
+  	set_curbuf(buf, DOBUF_GOTO);
+  
+!     return TRUE;
+  }
+  
+  /*
+--- 1687,1715 ----
+  #ifdef FEAT_WINDOWS
+      /* Try to find a window that contains the buffer. */
+      if (buf != curbuf)
+! 	FOR_ALL_TAB_WINDOWS(tp, wp)
+  	    if (wp->w_buffer == buf)
+  	    {
+! 		goto_tabpage_win(tp, wp);
+  # ifdef FEAT_AUTOCMD
+  		/* Paranoia: did autocms wipe out the buffer with changes? */
+  		if (!buf_valid(buf))
+! 		{
+! 		    goto theend;
+! 		}
+  # endif
+! 		goto buf_found;
+  	    }
++ buf_found:
+  #endif
+  
+      /* Open the changed buffer in the current window. */
+      if (buf != curbuf)
+  	set_curbuf(buf, DOBUF_GOTO);
+  
+! theend:
+!     vim_free(bufnrs);
+!     return ret;
+  }
+  
+  /*
+***************
+*** 3274,3280 ****
+  	    home_replace(NULL, SCRIPT_ITEM(i).sn_name,
+  						    NameBuff, MAXPATHL, TRUE);
+  	    smsg((char_u *)"%3d: %s", i, NameBuff);
+!         }
+  }
+  
+  # if defined(BACKSLASH_IN_FILENAME) || defined(PROTO)
+--- 3331,3337 ----
+  	    home_replace(NULL, SCRIPT_ITEM(i).sn_name,
+  						    NameBuff, MAXPATHL, TRUE);
+  	    smsg((char_u *)"%3d: %s", i, NameBuff);
+! 	}
+  }
+  
+  # if defined(BACKSLASH_IN_FILENAME) || defined(PROTO)
+*** ../vim-7.3.479/src/version.c	2012-03-23 16:25:13.000000000 +0100
+--- src/version.c	2012-03-23 16:48:06.000000000 +0100
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     480,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+243. You unsuccessfully try to download a pizza from www.dominos.com.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.481 b/source/ap/vim/patches/7.3.481
new file mode 100644
index 00000000..69f69158
--- /dev/null
+++ b/source/ap/vim/patches/7.3.481
@@ -0,0 +1,65 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.481
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.481
+Problem:    Changing 'virtualedit' in an operator function to "all" does not
+	    have the desired effect. (Aaron Bohannon)
+Solution:   Save, reset and restore virtual_op when executing an operator
+	    function.
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.480/src/normal.c	2012-02-05 01:18:41.000000000 +0100
+--- src/normal.c	2012-03-28 12:59:46.000000000 +0200
+***************
+*** 2279,2284 ****
+--- 2279,2285 ----
+  {
+  #ifdef FEAT_EVAL
+      char_u	*(argv[1]);
++     int		save_virtual_op = virtual_op;
+  
+      if (*p_opfunc == NUL)
+  	EMSG(_("E774: 'operatorfunc' is empty"));
+***************
+*** 2297,2303 ****
+--- 2298,2311 ----
+  	    argv[0] = (char_u *)"line";
+  	else
+  	    argv[0] = (char_u *)"char";
++ 
++ 	/* Reset virtual_op so that 'virtualedit' can be changed in the
++ 	 * function. */
++ 	virtual_op = MAYBE;
++ 
+  	(void)call_func_retnr(p_opfunc, 1, argv, FALSE);
++ 
++ 	virtual_op = save_virtual_op;
+      }
+  #else
+      EMSG(_("E775: Eval feature not available"));
+*** ../vim-7.3.480/src/version.c	2012-03-23 18:39:10.000000000 +0100
+--- src/version.c	2012-03-28 12:50:20.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     481,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+269. You wonder how you can make your dustbin produce Sesame Street's
+     Oscar's the Garbage Monster song when you empty it.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.482 b/source/ap/vim/patches/7.3.482
new file mode 100644
index 00000000..56ff3017
--- /dev/null
+++ b/source/ap/vim/patches/7.3.482
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.482
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.482
+Problem:    With 'cursorbind' set moving up/down does not always keep the same
+	    column.
+Solution:   Set curswant appropriately. (Gary Johnson)
+Files:	    src/move.c
+
+
+*** ../vim-7.3.481/src/move.c	2012-03-16 19:24:21.000000000 +0100
+--- src/move.c	2012-03-28 14:16:02.000000000 +0200
+***************
+*** 2847,2852 ****
+--- 2847,2854 ----
+  # ifdef FEAT_VIRTUALEDIT
+      colnr_T	coladd = curwin->w_cursor.coladd;
+  # endif
++     colnr_T	curswant = curwin->w_curswant;
++     int		set_curswant = curwin->w_set_curswant;
+      win_T	*old_curwin = curwin;
+      buf_T	*old_curbuf = curbuf;
+      int		restart_edit_save;
+***************
+*** 2881,2886 ****
+--- 2883,2890 ----
+  # ifdef FEAT_VIRTUALEDIT
+  	    curwin->w_cursor.coladd = coladd;
+  # endif
++ 	    curwin->w_curswant = curswant;
++ 	    curwin->w_set_curswant = set_curswant;
+  
+  	    /* Make sure the cursor is in a valid position.  Temporarily set
+  	     * "restart_edit" to allow the cursor to be beyond the EOL. */
+*** ../vim-7.3.481/src/version.c	2012-03-28 12:59:53.000000000 +0200
+--- src/version.c	2012-03-28 14:15:56.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     482,
+  /**/
+
+-- 
+Women are probably the main cause of free software starvation.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.483 b/source/ap/vim/patches/7.3.483
new file mode 100644
index 00000000..bab488b4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.483
@@ -0,0 +1,97 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.483
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.483  (after 7.3.477)
+Problem:    More prompt shows up too often.
+Solution:   Instead of adding a line break, only start a new line in the
+	    message history. (Christian Brabandt)
+Files:	    src/eval.c, src/message.c, src/proto/message.pro
+
+
+*** ../vim-7.3.482/src/eval.c	2012-03-23 15:36:57.000000000 +0100
+--- src/eval.c	2012-03-28 16:41:03.000000000 +0200
+***************
+*** 20493,20501 ****
+  		 * may cause a message to appear. */
+  		if (eap->cmdidx == CMD_echo)
+  		{
+! 		    /* Put the output below the command, makes scrolling back
+! 		     * at more prompt work. */
+! 		    msg_didout = TRUE;
+  		    msg_start();
+  		}
+  	    }
+--- 20493,20502 ----
+  		 * may cause a message to appear. */
+  		if (eap->cmdidx == CMD_echo)
+  		{
+! 		    /* Mark the saved text as finishing the line, so that what
+! 		     * follows is displayed on a new line when scrolling back
+! 		     * at the more prompt. */
+! 		    msg_sb_eol();
+  		    msg_start();
+  		}
+  	    }
+*** ../vim-7.3.482/src/message.c	2012-01-26 13:01:54.000000000 +0100
+--- src/message.c	2012-03-28 16:35:26.000000000 +0200
+***************
+*** 2348,2353 ****
+--- 2348,2363 ----
+  }
+  
+  /*
++  * Mark the last message chunk as finishing the line.
++  */
++     void
++ msg_sb_eol()
++ {
++     if (last_msgchunk != NULL)
++ 	last_msgchunk->sb_eol = TRUE;
++ }
++ 
++ /*
+   * Display a screen line from previously displayed text at row "row".
+   * Returns a pointer to the text for the next line (can be NULL).
+   */
+*** ../vim-7.3.482/src/proto/message.pro	2012-01-20 20:44:38.000000000 +0100
+--- src/proto/message.pro	2012-03-28 16:35:33.000000000 +0200
+***************
+*** 45,50 ****
+--- 45,51 ----
+  void may_clear_sb_text __ARGS((void));
+  void clear_sb_text __ARGS((void));
+  void show_sb_text __ARGS((void));
++ void msg_sb_eol __ARGS((void));
+  int msg_use_printf __ARGS((void));
+  void mch_errmsg __ARGS((char *str));
+  void mch_msg __ARGS((char *str));
+*** ../vim-7.3.482/src/version.c	2012-03-28 14:19:46.000000000 +0200
+--- src/version.c	2012-03-28 16:48:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     483,
+  /**/
+
+-- 
+       We're knights of the Round Table
+       Our shows are formidable
+       But many times
+       We're given rhymes
+       That are quite unsingable
+       We're opera mad in Camelot
+       We sing from the diaphragm a lot.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.484 b/source/ap/vim/patches/7.3.484
new file mode 100644
index 00000000..99968eb2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.484
@@ -0,0 +1,62 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.484
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.484
+Problem:    The -E and --echo-wid command line arguments are not mentioned in
+	    "vim --help".
+Solution:   Add the help lines. (Dominique Pelle)
+Files:	    src/main.c
+
+
+*** ../vim-7.3.483/src/main.c	2012-02-12 01:55:50.000000000 +0100
+--- src/main.c	2012-03-28 16:55:03.000000000 +0200
+***************
+*** 3181,3186 ****
+--- 3181,3187 ----
+  #endif
+      main_msg(_("-v\t\t\tVi mode (like \"vi\")"));
+      main_msg(_("-e\t\t\tEx mode (like \"ex\")"));
++     main_msg(_("-E\t\t\tImproved Ex mode"));
+      main_msg(_("-s\t\t\tSilent (batch) mode (only for \"ex\")"));
+  #ifdef FEAT_DIFF
+      main_msg(_("-d\t\t\tDiff mode (like \"vimdiff\")"));
+***************
+*** 3304,3309 ****
+--- 3305,3311 ----
+      main_msg(_("-display <display>\tRun vim on <display> (also: --display)"));
+      main_msg(_("--role <role>\tSet a unique role to identify the main window"));
+      main_msg(_("--socketid <xid>\tOpen Vim inside another GTK widget"));
++     main_msg(_("--echo-wid\t\tMake gvim echo the Window ID on stdout"));
+  #endif
+  #ifdef FEAT_GUI_W32
+      main_msg(_("-P <parent title>\tOpen Vim inside parent application"));
+*** ../vim-7.3.483/src/version.c	2012-03-28 16:49:25.000000000 +0200
+--- src/version.c	2012-03-28 17:10:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     484,
+  /**/
+
+-- 
+       In war we're tough and able.
+       Quite indefatigable
+       Between our quests
+       We sequin vests
+       And impersonate Clark Gable
+       It's a busy life in Camelot.
+       I have to push the pram a lot.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.485 b/source/ap/vim/patches/7.3.485
new file mode 100644
index 00000000..46b4cb73
--- /dev/null
+++ b/source/ap/vim/patches/7.3.485
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.485
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.485
+Problem:    When building Vim LDFLAGS isn't passed on to building xxd.
+Solution:   Pass the LDFLAGS value. (James McCoy)
+Files:	    src/Makefile
+
+
+*** ../vim-7.3.484/src/Makefile	2011-12-14 20:51:19.000000000 +0100
+--- src/Makefile	2012-03-28 17:16:06.000000000 +0200
+***************
+*** 1720,1726 ****
+  		sh $(srcdir)/link.sh
+  
+  xxd/xxd$(EXEEXT): xxd/xxd.c
+! 	cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
+  		$(MAKE) -f Makefile
+  
+  # Build the language specific files if they were unpacked.
+--- 1720,1726 ----
+  		sh $(srcdir)/link.sh
+  
+  xxd/xxd$(EXEEXT): xxd/xxd.c
+! 	cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \
+  		$(MAKE) -f Makefile
+  
+  # Build the language specific files if they were unpacked.
+*** ../vim-7.3.484/src/version.c	2012-03-28 17:10:26.000000000 +0200
+--- src/version.c	2012-03-28 17:16:15.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     485,
+  /**/
+
+-- 
+GOD: That is your purpose Arthur ... the Quest for the Holy Grail ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.486 b/source/ap/vim/patches/7.3.486
new file mode 100644
index 00000000..44e2afe8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.486
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.486
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.486
+Problem:    Build error with mingw64 on Windows 7.
+Solution:   Avoid the step of going through vimres.res. (Guopeng Wen)
+Files:	    src/Make_ming.mak
+
+
+*** ../vim-7.3.485/src/Make_ming.mak	2012-02-29 16:56:35.000000000 +0100
+--- src/Make_ming.mak	2012-03-28 17:41:55.000000000 +0200
+***************
+*** 681,691 ****
+  $(OUTDIR)/%.o : %.c $(INCL)
+  	$(CC) -c $(CFLAGS) $< -o $@
+  
+! $(OUTDIR)/vimres.res: vim.rc version.h gui_w32_rc.h
+! 	$(WINDRES) $(WINDRES_FLAGS) $(DEFINES) vim.rc $(OUTDIR)/vimres.res
+! 
+! $(OUTDIR)/vimrc.o: $(OUTDIR)/vimres.res
+! 	$(WINDRES) $(WINDRES_FLAGS) $(OUTDIR)/vimres.res $(OUTDIR)/vimrc.o
+  
+  $(OUTDIR):
+  	$(MKDIR) $(OUTDIR)
+--- 681,689 ----
+  $(OUTDIR)/%.o : %.c $(INCL)
+  	$(CC) -c $(CFLAGS) $< -o $@
+  
+! $(OUTDIR)/vimrc.o: vim.rc version.h gui_w32_rc.h
+! 	$(WINDRES) $(WINDRES_FLAGS) $(DEFINES) \
+! 	    --input-format=rc --output-format=coff -i vim.rc -o $@
+  
+  $(OUTDIR):
+  	$(MKDIR) $(OUTDIR)
+*** ../vim-7.3.485/src/version.c	2012-03-28 17:17:45.000000000 +0200
+--- src/version.c	2012-03-28 17:42:25.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     486,
+  /**/
+
+-- 
+There is a fine line between courage and foolishness.
+Unfortunately, it's not a fence.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.487 b/source/ap/vim/patches/7.3.487
new file mode 100644
index 00000000..3c00349b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.487
@@ -0,0 +1,572 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.487
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.487
+Problem:    When setting 'timeoutlen' or 'ttimeoutlen' the column for vertical
+	    movement is reset unnecessarily.
+Solution:   Do not set w_set_curswant for every option. Add a test for this.
+	    (Kana Natsuno) Add the P_CURSWANT flag for options.
+Files:	    src/option.c, src/testdir/test84.in, src/testdir/test84.ok,
+	    src/testdir/Make_amiga.mak, src/testdir/Make_dos.mak,
+	    src/testdir/Make_ming.mak, src/testdir/Make_os2.mak,
+	    src/testdir/Make_vms.mms, src/testdir/Makefile
+
+
+*** ../vim-7.3.486/src/option.c	2012-03-23 16:25:13.000000000 +0100
+--- src/option.c	2012-03-28 19:57:46.000000000 +0200
+***************
+*** 433,449 ****
+  #define P_RCLR		0x7000	/* clear and redraw all */
+  
+  #define P_COMMA		0x8000	/* comma separated list */
+! #define P_NODUP		0x10000L/* don't allow duplicate strings */
+! #define P_FLAGLIST	0x20000L/* list of single-char flags */
+  
+! #define P_SECURE	0x40000L/* cannot change in modeline or secure mode */
+! #define P_GETTEXT	0x80000L/* expand default value with _() */
+! #define P_NOGLOB       0x100000L/* do not use local value for global vimrc */
+! #define P_NFNAME       0x200000L/* only normal file name chars allowed */
+! #define P_INSECURE     0x400000L/* option was set from a modeline */
+! #define P_PRI_MKRC     0x800000L/* priority for :mkvimrc (setting option has
+  				   side effects) */
+! #define P_NO_ML       0x1000000L/* not allowed in modeline */
+  
+  #define ISK_LATIN1  (char_u *)"@,48-57,_,192-255"
+  
+--- 433,451 ----
+  #define P_RCLR		0x7000	/* clear and redraw all */
+  
+  #define P_COMMA		0x8000	/* comma separated list */
+! #define P_NODUP		0x10000L /* don't allow duplicate strings */
+! #define P_FLAGLIST	0x20000L /* list of single-char flags */
+  
+! #define P_SECURE	0x40000L /* cannot change in modeline or secure mode */
+! #define P_GETTEXT	0x80000L /* expand default value with _() */
+! #define P_NOGLOB       0x100000L /* do not use local value for global vimrc */
+! #define P_NFNAME       0x200000L /* only normal file name chars allowed */
+! #define P_INSECURE     0x400000L /* option was set from a modeline */
+! #define P_PRI_MKRC     0x800000L /* priority for :mkvimrc (setting option has
+  				   side effects) */
+! #define P_NO_ML       0x1000000L /* not allowed in modeline */
+! #define P_CURSWANT    0x2000000L /* update curswant required; not needed when
+! 				  * there is a redraw flag */
+  
+  #define ISK_LATIN1  (char_u *)"@,48-57,_,192-255"
+  
+***************
+*** 479,485 ****
+  #endif
+  	options[] =
+  {
+!     {"aleph",	    "al",   P_NUM|P_VI_DEF,
+  #ifdef FEAT_RIGHTLEFT
+  			    (char_u *)&p_aleph, PV_NONE,
+  #else
+--- 481,487 ----
+  #endif
+  	options[] =
+  {
+!     {"aleph",	    "al",   P_NUM|P_VI_DEF|P_CURSWANT,
+  #ifdef FEAT_RIGHTLEFT
+  			    (char_u *)&p_aleph, PV_NONE,
+  #else
+***************
+*** 501,507 ****
+  			    {(char_u *)FALSE, (char_u *)FALSE}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"arabic",	    "arab", P_BOOL|P_VI_DEF|P_VIM,
+  #ifdef FEAT_ARABIC
+  			    (char_u *)VAR_WIN, PV_ARAB,
+  #else
+--- 503,509 ----
+  			    {(char_u *)FALSE, (char_u *)FALSE}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"arabic",	    "arab", P_BOOL|P_VI_DEF|P_VIM|P_CURSWANT,
+  #ifdef FEAT_ARABIC
+  			    (char_u *)VAR_WIN, PV_ARAB,
+  #else
+***************
+*** 778,784 ****
+      {"columns",	    "co",   P_NUM|P_NODEFAULT|P_NO_MKRC|P_VI_DEF|P_RCLR,
+  			    (char_u *)&Columns, PV_NONE,
+  			    {(char_u *)80L, (char_u *)0L} SCRIPTID_INIT},
+!     {"comments",    "com",  P_STRING|P_ALLOCED|P_VI_DEF|P_COMMA|P_NODUP,
+  #ifdef FEAT_COMMENTS
+  			    (char_u *)&p_com, PV_COM,
+  			    {(char_u *)"s1:/*,mb:*,ex:*/,://,b:#,:%,:XCOMM,n:>,fb:-",
+--- 780,786 ----
+      {"columns",	    "co",   P_NUM|P_NODEFAULT|P_NO_MKRC|P_VI_DEF|P_RCLR,
+  			    (char_u *)&Columns, PV_NONE,
+  			    {(char_u *)80L, (char_u *)0L} SCRIPTID_INIT},
+!     {"comments",    "com",  P_STRING|P_ALLOCED|P_VI_DEF|P_COMMA|P_NODUP|P_CURSWANT,
+  #ifdef FEAT_COMMENTS
+  			    (char_u *)&p_com, PV_COM,
+  			    {(char_u *)"s1:/*,mb:*,ex:*/,://,b:#,:%,:XCOMM,n:>,fb:-",
+***************
+*** 788,794 ****
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"commentstring", "cms", P_STRING|P_ALLOCED|P_VI_DEF,
+  #ifdef FEAT_FOLDING
+  			    (char_u *)&p_cms, PV_CMS,
+  			    {(char_u *)"/*%s*/", (char_u *)0L}
+--- 790,796 ----
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"commentstring", "cms", P_STRING|P_ALLOCED|P_VI_DEF|P_CURSWANT,
+  #ifdef FEAT_FOLDING
+  			    (char_u *)&p_cms, PV_CMS,
+  			    {(char_u *)"/*%s*/", (char_u *)0L}
+***************
+*** 953,959 ****
+      {"debug",	    NULL,   P_STRING|P_VI_DEF,
+  			    (char_u *)&p_debug, PV_NONE,
+  			    {(char_u *)"", (char_u *)0L} SCRIPTID_INIT},
+!     {"define",	    "def",  P_STRING|P_ALLOCED|P_VI_DEF,
+  #ifdef FEAT_FIND_ID
+  			    (char_u *)&p_def, PV_DEF,
+  			    {(char_u *)"^\\s*#\\s*define", (char_u *)0L}
+--- 955,961 ----
+      {"debug",	    NULL,   P_STRING|P_VI_DEF,
+  			    (char_u *)&p_debug, PV_NONE,
+  			    {(char_u *)"", (char_u *)0L} SCRIPTID_INIT},
+!     {"define",	    "def",  P_STRING|P_ALLOCED|P_VI_DEF|P_CURSWANT,
+  #ifdef FEAT_FIND_ID
+  			    (char_u *)&p_def, PV_DEF,
+  			    {(char_u *)"^\\s*#\\s*define", (char_u *)0L}
+***************
+*** 983,989 ****
+  			    (char_u *)NULL, PV_NONE,
+  #endif
+  			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
+!     {"diffexpr",    "dex",  P_STRING|P_VI_DEF|P_SECURE,
+  #if defined(FEAT_DIFF) && defined(FEAT_EVAL)
+  			    (char_u *)&p_dex, PV_NONE,
+  			    {(char_u *)"", (char_u *)0L}
+--- 985,991 ----
+  			    (char_u *)NULL, PV_NONE,
+  #endif
+  			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
+!     {"diffexpr",    "dex",  P_STRING|P_VI_DEF|P_SECURE|P_CURSWANT,
+  #if defined(FEAT_DIFF) && defined(FEAT_EVAL)
+  			    (char_u *)&p_dex, PV_NONE,
+  			    {(char_u *)"", (char_u *)0L}
+***************
+*** 1099,1105 ****
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"fileformat",  "ff",   P_STRING|P_ALLOCED|P_VI_DEF|P_RSTAT|P_NO_MKRC,
+  			    (char_u *)&p_ff, PV_FF,
+  			    {(char_u *)DFLT_FF, (char_u *)0L} SCRIPTID_INIT},
+      {"fileformats", "ffs",  P_STRING|P_VIM|P_COMMA|P_NODUP,
+--- 1101,1107 ----
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"fileformat",  "ff",   P_STRING|P_ALLOCED|P_VI_DEF|P_RSTAT|P_NO_MKRC|P_CURSWANT,
+  			    (char_u *)&p_ff, PV_FF,
+  			    {(char_u *)DFLT_FF, (char_u *)0L} SCRIPTID_INIT},
+      {"fileformats", "ffs",  P_STRING|P_VIM|P_COMMA|P_NODUP,
+***************
+*** 1159,1165 ****
+      {"foldlevel",   "fdl",  P_NUM|P_VI_DEF|P_RWIN,
+  			    (char_u *)VAR_WIN, PV_FDL,
+  			    {(char_u *)0L, (char_u *)0L} SCRIPTID_INIT},
+!     {"foldlevelstart","fdls", P_NUM|P_VI_DEF,
+  			    (char_u *)&p_fdls, PV_NONE,
+  			    {(char_u *)-1L, (char_u *)0L} SCRIPTID_INIT},
+      {"foldmarker",  "fmr",  P_STRING|P_ALLOCED|P_VIM|P_VI_DEF|
+--- 1161,1167 ----
+      {"foldlevel",   "fdl",  P_NUM|P_VI_DEF|P_RWIN,
+  			    (char_u *)VAR_WIN, PV_FDL,
+  			    {(char_u *)0L, (char_u *)0L} SCRIPTID_INIT},
+!     {"foldlevelstart","fdls", P_NUM|P_VI_DEF|P_CURSWANT,
+  			    (char_u *)&p_fdls, PV_NONE,
+  			    {(char_u *)-1L, (char_u *)0L} SCRIPTID_INIT},
+      {"foldmarker",  "fmr",  P_STRING|P_ALLOCED|P_VIM|P_VI_DEF|
+***************
+*** 1176,1182 ****
+      {"foldnestmax", "fdn",  P_NUM|P_VI_DEF|P_RWIN,
+  			    (char_u *)VAR_WIN, PV_FDN,
+  			    {(char_u *)20L, (char_u *)0L} SCRIPTID_INIT},
+!     {"foldopen",    "fdo",  P_STRING|P_VI_DEF|P_COMMA|P_NODUP,
+  			    (char_u *)&p_fdo, PV_NONE,
+  		 {(char_u *)"block,hor,mark,percent,quickfix,search,tag,undo",
+  						 (char_u *)0L} SCRIPTID_INIT},
+--- 1178,1184 ----
+      {"foldnestmax", "fdn",  P_NUM|P_VI_DEF|P_RWIN,
+  			    (char_u *)VAR_WIN, PV_FDN,
+  			    {(char_u *)20L, (char_u *)0L} SCRIPTID_INIT},
+!     {"foldopen",    "fdo",  P_STRING|P_VI_DEF|P_COMMA|P_NODUP|P_CURSWANT,
+  			    (char_u *)&p_fdo, PV_NONE,
+  		 {(char_u *)"block,hor,mark,percent,quickfix,search,tag,undo",
+  						 (char_u *)0L} SCRIPTID_INIT},
+***************
+*** 1741,1747 ****
+      {"matchtime",   "mat",  P_NUM|P_VI_DEF,
+  			    (char_u *)&p_mat, PV_NONE,
+  			    {(char_u *)5L, (char_u *)0L} SCRIPTID_INIT},
+!     {"maxcombine",  "mco",  P_NUM|P_VI_DEF,
+  #ifdef FEAT_MBYTE
+  			    (char_u *)&p_mco, PV_NONE,
+  #else
+--- 1743,1749 ----
+      {"matchtime",   "mat",  P_NUM|P_VI_DEF,
+  			    (char_u *)&p_mat, PV_NONE,
+  			    {(char_u *)5L, (char_u *)0L} SCRIPTID_INIT},
+!     {"maxcombine",  "mco",  P_NUM|P_VI_DEF|P_CURSWANT,
+  #ifdef FEAT_MBYTE
+  			    (char_u *)&p_mco, PV_NONE,
+  #else
+***************
+*** 2710,2716 ****
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"virtualedit", "ve",   P_STRING|P_COMMA|P_NODUP|P_VI_DEF|P_VIM,
+  #ifdef FEAT_VIRTUALEDIT
+  			    (char_u *)&p_ve, PV_NONE,
+  			    {(char_u *)"", (char_u *)""}
+--- 2712,2718 ----
+  			    {(char_u *)0L, (char_u *)0L}
+  #endif
+  			    SCRIPTID_INIT},
+!     {"virtualedit", "ve",   P_STRING|P_COMMA|P_NODUP|P_VI_DEF|P_VIM|P_CURSWANT,
+  #ifdef FEAT_VIRTUALEDIT
+  			    (char_u *)&p_ve, PV_NONE,
+  			    {(char_u *)"", (char_u *)""}
+***************
+*** 7064,7071 ****
+      }
+  #endif
+  
+!     if (curwin->w_curswant != MAXCOL)
+! 	curwin->w_set_curswant = TRUE;  /* in case 'showbreak' changed */
+  #ifdef FEAT_GUI
+      /* check redraw when it's not a GUI option or the GUI is active. */
+      if (!redraw_gui_only || gui.in_use)
+--- 7066,7075 ----
+      }
+  #endif
+  
+!     if (curwin->w_curswant != MAXCOL
+! 		     && (options[opt_idx].flags & (P_CURSWANT | P_RCLR)) != 0)
+! 	curwin->w_set_curswant = TRUE;
+! 
+  #ifdef FEAT_GUI
+      /* check redraw when it's not a GUI option or the GUI is active. */
+      if (!redraw_gui_only || gui.in_use)
+***************
+*** 7587,7595 ****
+  	  || (int *)varp == &curwin->w_p_nu
+  	  || (int *)varp == &curwin->w_p_rnu)
+      {
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+- 
+  	/* If 'number' is set, reset 'relativenumber'. */
+  	/* If 'relativenumber' is set, reset 'number'. */
+  	if ((int *)varp == &curwin->w_p_nu && curwin->w_p_nu)
+--- 7591,7596 ----
+***************
+*** 7834,7841 ****
+      {
+  	if (curwin->w_p_wrap)
+  	    curwin->w_leftcol = 0;
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+      }
+  
+  #ifdef FEAT_WINDOWS
+--- 7835,7840 ----
+***************
+*** 8062,8092 ****
+  	    curbuf->b_p_imsearch = B_IMODE_USE_INSERT;
+  # endif
+  	}
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+      }
+  
+-     else if ((int *)varp == &p_arshape)
+-     {
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+-     }
+- #endif
+- 
+- #ifdef FEAT_LINEBREAK
+-     if ((int *)varp == &curwin->w_p_lbr)
+-     {
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+-     }
+- #endif
+- 
+- #ifdef FEAT_RIGHTLEFT
+-     if ((int *)varp == &curwin->w_p_rl)
+-     {
+- 	if (curwin->w_curswant != MAXCOL)
+- 	    curwin->w_set_curswant = TRUE;
+-     }
+  #endif
+  
+      /*
+--- 8061,8068 ----
+***************
+*** 8096,8102 ****
+      options[opt_idx].flags |= P_WAS_SET;
+  
+      comp_col();			    /* in case 'ruler' or 'showcmd' changed */
+! 
+      check_redraw(options[opt_idx].flags);
+  
+      return NULL;
+--- 8072,8080 ----
+      options[opt_idx].flags |= P_WAS_SET;
+  
+      comp_col();			    /* in case 'ruler' or 'showcmd' changed */
+!     if (curwin->w_curswant != MAXCOL
+! 		     && (options[opt_idx].flags & (P_CURSWANT | P_RCLR)) != 0)
+! 	curwin->w_set_curswant = TRUE;
+      check_redraw(options[opt_idx].flags);
+  
+      return NULL;
+***************
+*** 8611,8618 ****
+      options[opt_idx].flags |= P_WAS_SET;
+  
+      comp_col();			    /* in case 'columns' or 'ls' changed */
+!     if (curwin->w_curswant != MAXCOL)
+! 	curwin->w_set_curswant = TRUE;  /* in case 'tabstop' changed */
+      check_redraw(options[opt_idx].flags);
+  
+      return errmsg;
+--- 8589,8597 ----
+      options[opt_idx].flags |= P_WAS_SET;
+  
+      comp_col();			    /* in case 'columns' or 'ls' changed */
+!     if (curwin->w_curswant != MAXCOL
+! 		     && (options[opt_idx].flags & (P_CURSWANT | P_RCLR)) != 0)
+! 	curwin->w_set_curswant = TRUE;
+      check_redraw(options[opt_idx].flags);
+  
+      return errmsg;
+*** ../vim-7.3.486/src/testdir/test84.in	2012-03-28 19:55:12.000000000 +0200
+--- src/testdir/test84.in	2012-03-28 19:46:53.000000000 +0200
+***************
+*** 0 ****
+--- 1,35 ----
++ Tests for curswant not changing when setting an option
++ 
++ STARTTEST
++ :so small.vim
++ :/^start target options$/+1,/^end target options$/-1 yank
++ :let target_option_names = split(@0)
++ :function TestCurswant(option_name)
++ :  normal! ggf8j
++ :  let curswant_before = winsaveview().curswant
++ :  execute 'let' '&'.a:option_name '=' '&'.a:option_name
++ :  let curswant_after = winsaveview().curswant
++ :  return [a:option_name, curswant_before, curswant_after]
++ :endfunction
++ :
++ :new
++ :put =['1234567890', '12345']
++ :1 delete _
++ :let result = []
++ :for option_name in target_option_names
++ :  call add(result, TestCurswant(option_name))
++ :endfor
++ :
++ :new
++ :put =map(copy(result), 'join(v:val, '' '')')
++ :1 delete _
++ :write test.out
++ :
++ :qall!
++ ENDTEST
++ 
++ start target options
++ 	tabstop
++ 	timeoutlen
++ 	ttimeoutlen
++ end target options
+*** ../vim-7.3.486/src/testdir/test84.ok	2012-03-28 19:55:12.000000000 +0200
+--- src/testdir/test84.ok	2012-03-28 19:48:36.000000000 +0200
+***************
+*** 0 ****
+--- 1,3 ----
++ tabstop 7 4
++ timeoutlen 7 7
++ ttimeoutlen 7 7
+*** ../vim-7.3.486/src/testdir/Make_amiga.mak	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Make_amiga.mak	2012-03-28 18:14:08.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out test84.out
+  
+  .SUFFIXES: .in .out
+  
+***************
+*** 132,134 ****
+--- 132,135 ----
+  test81.out: test81.in
+  test82.out: test82.in
+  test83.out: test83.in
++ test84.out: test84.in
+*** ../vim-7.3.486/src/testdir/Make_dos.mak	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Make_dos.mak	2012-03-28 18:14:41.000000000 +0200
+***************
+*** 29,35 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 29,36 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.486/src/testdir/Make_ming.mak	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Make_ming.mak	2012-03-28 18:14:46.000000000 +0200
+***************
+*** 49,55 ****
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 49,56 ----
+  		test42.out test52.out test65.out test66.out test67.out \
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.486/src/testdir/Make_os2.mak	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Make_os2.mak	2012-03-28 18:15:00.000000000 +0200
+***************
+*** 29,35 ****
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out
+  
+  .SUFFIXES: .in .out
+  
+--- 29,35 ----
+  		test66.out test67.out test68.out test69.out test70.out \
+  		test71.out test72.out test73.out test74.out test75.out \
+  		test76.out test77.out test78.out test79.out test80.out \
+! 		test81.out test82.out test83.out test84.out
+  
+  .SUFFIXES: .in .out
+  
+*** ../vim-7.3.486/src/testdir/Make_vms.mms	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Make_vms.mms	2012-03-28 18:15:15.000000000 +0200
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2011 Jul 15
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2012 Mar 28
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 76,82 ****
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+  	 test77.out test78.out test79.out test80.out test81.out \
+! 	 test82.out test83.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+--- 76,82 ----
+  	 test66.out test67.out test68.out test69.out \
+  	 test71.out test72.out test74.out test75.out test76.out \
+  	 test77.out test78.out test79.out test80.out test81.out \
+! 	 test82.out test83.out test84.out
+  
+  # Known problems:
+  # Test 30: a problem around mac format - unknown reason
+*** ../vim-7.3.486/src/testdir/Makefile	2011-10-12 19:53:31.000000000 +0200
+--- src/testdir/Makefile	2012-03-28 18:15:29.000000000 +0200
+***************
+*** 26,32 ****
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 26,33 ----
+  		test64.out test65.out test66.out test67.out test68.out \
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+! 		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS_GUI = test16.out
+  
+*** ../vim-7.3.486/src/version.c	2012-03-28 17:43:06.000000000 +0200
+--- src/version.c	2012-03-28 19:49:41.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     487,
+  /**/
+
+-- 
+"Time flies like an arrow".  So I put an arrow on my desk, now
+awaiting one of these time flies showing up.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.488 b/source/ap/vim/patches/7.3.488
new file mode 100644
index 00000000..e0787404
--- /dev/null
+++ b/source/ap/vim/patches/7.3.488
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.488
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.488
+Problem:    ":help!" in a help file does not work as document.
+Solution:   When in a help file don't give an error message. (thinca)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.487/src/ex_cmds.c	2012-03-16 14:32:10.000000000 +0100
+--- src/ex_cmds.c	2012-04-01 14:25:35.000000000 +0200
+***************
+*** 5546,5552 ****
+  	}
+  	arg = eap->arg;
+  
+! 	if (eap->forceit && *arg == NUL)
+  	{
+  	    EMSG(_("E478: Don't panic!"));
+  	    return;
+--- 5546,5552 ----
+  	}
+  	arg = eap->arg;
+  
+! 	if (eap->forceit && *arg == NUL && !curbuf->b_help)
+  	{
+  	    EMSG(_("E478: Don't panic!"));
+  	    return;
+*** ../vim-7.3.487/src/version.c	2012-03-28 19:58:34.000000000 +0200
+--- src/version.c	2012-04-05 16:04:13.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     488,
+  /**/
+
+
+-- 
+I'd like to meet the man who invented sex and see what he's working on now.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.489 b/source/ap/vim/patches/7.3.489
new file mode 100644
index 00000000..fbdf2c39
--- /dev/null
+++ b/source/ap/vim/patches/7.3.489
@@ -0,0 +1,89 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.489
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.489
+Problem:    CTRL-] in Insert mode does not expand abbreviation when used in a
+	    mapping. (Yichao Zhou)
+Solution:   Special case using CTRL-]. (Christian Brabandt)
+Files:	    src/getchar.c, src/edit.c
+
+
+*** ../vim-7.3.488/src/getchar.c	2012-02-05 22:05:44.000000000 +0100
+--- src/getchar.c	2012-04-05 15:54:00.000000000 +0200
+***************
+*** 4352,4359 ****
+  
+      if (typebuf.tb_no_abbr_cnt)	/* abbrev. are not recursive */
+  	return FALSE;
+!     if ((KeyNoremap & (RM_NONE|RM_SCRIPT)) != 0)
+! 	/* no remapping implies no abbreviation */
+  	return FALSE;
+  
+      /*
+--- 4352,4360 ----
+  
+      if (typebuf.tb_no_abbr_cnt)	/* abbrev. are not recursive */
+  	return FALSE;
+! 
+!     /* no remapping implies no abbreviation, except for CTRL-] */
+!     if ((KeyNoremap & (RM_NONE|RM_SCRIPT)) != 0 && c != Ctrl_RSB)
+  	return FALSE;
+  
+      /*
+*** ../vim-7.3.488/src/edit.c	2012-02-29 18:22:03.000000000 +0100
+--- src/edit.c	2012-04-05 15:57:46.000000000 +0200
+***************
+*** 1455,1467 ****
+  		    Insstart_blank_vcol = get_nolist_virtcol();
+  	    }
+  
+! 	    if (vim_iswordc(c) || !echeck_abbr(
+  #ifdef FEAT_MBYTE
+  			/* Add ABBR_OFF for characters above 0x100, this is
+  			 * what check_abbr() expects. */
+  			(has_mbyte && c >= 0x100) ? (c + ABBR_OFF) :
+  #endif
+! 			c))
+  	    {
+  		insert_special(c, FALSE, FALSE);
+  #ifdef FEAT_RIGHTLEFT
+--- 1455,1470 ----
+  		    Insstart_blank_vcol = get_nolist_virtcol();
+  	    }
+  
+! 	    /* Insert a normal character and check for abbreviations on a
+! 	     * special character.  Let CTRL-] expand abbreviations without
+! 	     * inserting it. */
+! 	    if (vim_iswordc(c) || (!echeck_abbr(
+  #ifdef FEAT_MBYTE
+  			/* Add ABBR_OFF for characters above 0x100, this is
+  			 * what check_abbr() expects. */
+  			(has_mbyte && c >= 0x100) ? (c + ABBR_OFF) :
+  #endif
+!                        c) && c != Ctrl_RSB))
+  	    {
+  		insert_special(c, FALSE, FALSE);
+  #ifdef FEAT_RIGHTLEFT
+*** ../vim-7.3.488/src/version.c	2012-04-05 16:04:58.000000000 +0200
+--- src/version.c	2012-04-05 16:06:12.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     489,
+  /**/
+
+-- 
+Just think of all the things we haven't thought of yet.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.490 b/source/ap/vim/patches/7.3.490
new file mode 100644
index 00000000..6c49a48d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.490
@@ -0,0 +1,2517 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.490
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.490
+Problem:    Member confusion in Lua interface.
+Solution:   Fix it.  Add luaeval(). (Taro Muraoka, Luis Carvalho)
+Files:	    runtime/doc/if_lua.txt, src/eval.c, src/if_lua.c,
+	    src/proto/if_lua.pro
+
+
+*** ../vim-7.3.489/runtime/doc/if_lua.txt	2010-08-15 21:57:14.000000000 +0200
+--- runtime/doc/if_lua.txt	2012-04-05 16:41:35.000000000 +0200
+***************
+*** 1,4 ****
+! *if_lua.txt*    For Vim version 7.3.  Last change: 2010 Jul 22
+  
+  
+  		  VIM REFERENCE MANUAL    by Luis Carvalho
+--- 1,4 ----
+! *if_lua.txt*    For Vim version 7.3.  Last change: 2012 Jan 16
+  
+  
+  		  VIM REFERENCE MANUAL    by Luis Carvalho
+***************
+*** 8,15 ****
+  
+  1. Commands			|lua-commands|
+  2. The vim module		|lua-vim|
+! 3. Buffer userdata		|lua-buffer|
+! 4. Window userdata		|lua-window|
+  
+  {Vi does not have any of these commands}
+  
+--- 8,18 ----
+  
+  1. Commands			|lua-commands|
+  2. The vim module		|lua-vim|
+! 3. List userdata		|lua-list|
+! 4. Dict userdata		|lua-dict|
+! 5. Buffer userdata		|lua-buffer|
+! 6. Window userdata		|lua-window|
+! 7. The luaeval function		|lua-luaeval|
+  
+  {Vi does not have any of these commands}
+  
+***************
+*** 88,98 ****
+  All these commands execute a Lua chunk from either the command line (:lua and
+  :luado) or a file (:luafile) with the given line [range]. Similarly to the Lua
+  interpreter, each chunk has its own scope and so only global variables are
+! shared between command calls. Lua default libraries "table", "string", "math",
+! and "package" are available, "io" and "debug" are not, and "os" is restricted
+! to functions "date", "clock", "time", "difftime", and "getenv". In addition,
+! Lua "print" function has its output redirected to the Vim message area, with
+! arguments separated by a white space instead of a tab.
+  
+  Lua uses the "vim" module (see |lua-vim|) to issue commands to Vim
+  and manage buffers (|lua-buffer|) and windows (|lua-window|). However,
+--- 91,99 ----
+  All these commands execute a Lua chunk from either the command line (:lua and
+  :luado) or a file (:luafile) with the given line [range]. Similarly to the Lua
+  interpreter, each chunk has its own scope and so only global variables are
+! shared between command calls. All Lua default libraries are available. In
+! addition, Lua "print" function has its output redirected to the Vim message
+! area, with arguments separated by a white space instead of a tab.
+  
+  Lua uses the "vim" module (see |lua-vim|) to issue commands to Vim
+  and manage buffers (|lua-buffer|) and windows (|lua-window|). However,
+***************
+*** 108,116 ****
+  module also includes routines for buffer, window, and current line queries,
+  Vim evaluation and command execution, and others.
+  
+! 	vim.isbuffer(value)	Returns 'true' (boolean, not string) if
+! 				"value" is a buffer userdata and 'false'
+! 				otherwise (see |lua-buffer|).
+  
+  	vim.buffer([arg])	If "arg" is a number, returns buffer with
+  				number "arg" in the buffer list or, if "arg"
+--- 109,117 ----
+  module also includes routines for buffer, window, and current line queries,
+  Vim evaluation and command execution, and others.
+  
+! 	vim.list()		Returns an empty list (see |List|).
+! 
+! 	vim.dict()		Returns an empty dictionary (see |Dictionary|).
+  
+  	vim.buffer([arg])	If "arg" is a number, returns buffer with
+  				number "arg" in the buffer list or, if "arg"
+***************
+*** 121,136 ****
+  				'true' returns the first buffer in the buffer
+  				list or else the current buffer.
+  
+- 	vim.iswindow(value)	Returns 'true' (boolean, not string) if
+- 				"value" is a window userdata and
+- 				'false' otherwise (see |lua-window|).
+- 
+  	vim.window([arg])	If "arg" is a number, returns window with
+  				number "arg" or 'nil' (nil value, not string)
+  				if not found. Otherwise, if "toboolean(arg)"
+  				is 'true' returns the first window or else the
+  				current window.
+  
+  	vim.command({cmd})	Executes the vim (ex-mode) command {cmd}.
+  				Examples: >
+  					:lua vim.command"set tw=60"
+--- 122,142 ----
+  				'true' returns the first buffer in the buffer
+  				list or else the current buffer.
+  
+  	vim.window([arg])	If "arg" is a number, returns window with
+  				number "arg" or 'nil' (nil value, not string)
+  				if not found. Otherwise, if "toboolean(arg)"
+  				is 'true' returns the first window or else the
+  				current window.
+  
++ 	vim.type({arg})		Returns the type of {arg}. It is equivalent to
++ 				Lua's "type" function, but returns "list",
++ 				"dict", "buffer", or "window" if {arg} is a
++ 				list, dictionary, buffer, or window,
++ 				respectively. Examples: >
++ 					:lua l = vim.list()
++ 					:lua print(type(l), vim.type(l))
++ 					:" userdata list
++ <
+  	vim.command({cmd})	Executes the vim (ex-mode) command {cmd}.
+  				Examples: >
+  					:lua vim.command"set tw=60"
+***************
+*** 141,147 ****
+  				Vim strings and numbers are directly converted
+  				to Lua strings and numbers respectively. Vim
+  				lists and dictionaries are converted to Lua
+! 				tables (lists become integer-keyed tables).
+  				Examples: >
+  					:lua tw = vim.eval"&tw"
+  					:lua print(vim.eval"{'a': 'one'}".a)
+--- 147,153 ----
+  				Vim strings and numbers are directly converted
+  				to Lua strings and numbers respectively. Vim
+  				lists and dictionaries are converted to Lua
+! 				userdata (see |lua-list| and |lua-dict|).
+  				Examples: >
+  					:lua tw = vim.eval"&tw"
+  					:lua print(vim.eval"{'a': 'one'}".a)
+***************
+*** 157,163 ****
+  
+  
+  ==============================================================================
+! 3. Buffer userdata					*lua-buffer*
+  
+  Buffer userdata represent vim buffers. A buffer userdata "b" has the following
+  properties and methods:
+--- 163,234 ----
+  
+  
+  ==============================================================================
+! 3. List userdata					*lua-list*
+! 
+! List userdata represent vim lists, and the interface tries to follow closely
+! Vim's syntax for lists. Since lists are objects, changes in list references in
+! Lua are reflected in Vim and vice-versa. A list "l" has the following
+! properties and methods:
+! 
+! Properties
+! ----------
+! 	o "#l" is the number of items in list "l", equivalent to "len(l)"
+! 	    in Vim.
+! 	o "l[k]" returns the k-th item in "l"; "l" is zero-indexed, as in Vim.
+! 	    To modify the k-th item, simply do "l[k] = newitem"; in
+! 	    particular, "l[k] = nil" removes the k-th item from "l".
+! 	o "l()" returns an iterator for "l".
+! 
+! Methods
+! -------
+! 	o "l:add(item)" appends "item" to the end of "l".
+! 	o "l:insert(item[, pos])" inserts "item" at (optional)
+! 	    position "pos" in the list. The default value for "pos" is 0.
+! 
+! Examples:
+! >
+! 	:let l = [1, 'item']
+! 	:lua l = vim.eval('l') -- same 'l'
+! 	:lua l:add(vim.list())
+! 	:lua l[0] = math.pi
+! 	:echo l[0] " 3.141593
+! 	:lua l[0] = nil -- remove first item
+! 	:lua l:insert(true, 1)
+! 	:lua print(l, #l, l[0], l[1], l[-1])
+! 	:lua for item in l() do print(item) end
+! <
+! 
+! ==============================================================================
+! 4. Dict userdata					*lua-dict*
+! 
+! Similarly to list userdata, dict userdata represent vim dictionaries; since
+! dictionaries are also objects, references are kept between Lua and Vim. A dict
+! "d" has the following properties:
+! 
+! Properties
+! ----------
+! 	o "#d" is the number of items in dict "d", equivalent to "len(d)"
+! 	    in Vim.
+! 	o "d.key" or "d['key']" returns the value at entry "key" in "d".
+! 	    To modify the entry at this key, simply do "d.key = newvalue"; in
+! 	    particular, "d.key = nil" removes the entry from "d".
+! 	o "d()" returns an iterator for "d" and is equivalent to "items(d)" in
+! 	    Vim.
+! 
+! Examples:
+! >
+! 	:let d = {'n':10}
+! 	:lua d = vim.eval('d') -- same 'd'
+! 	:lua print(d, d.n, #d)
+! 	:let d.self = d
+! 	:lua for k, v in d() do print(d, k, v) end
+! 	:lua d.x = math.pi
+! 	:lua d.self = nil -- remove entry
+! 	:echo d
+! <
+! 
+! ==============================================================================
+! 5. Buffer userdata					*lua-buffer*
+  
+  Buffer userdata represent vim buffers. A buffer userdata "b" has the following
+  properties and methods:
+***************
+*** 209,215 ****
+  <
+  
+  ==============================================================================
+! 4. Window userdata					*lua-window*
+  
+  Window objects represent vim windows. A window userdata "w" has the following
+  properties and methods:
+--- 280,286 ----
+  <
+  
+  ==============================================================================
+! 6. Window userdata					*lua-window*
+  
+  Window objects represent vim windows. A window userdata "w" has the following
+  properties and methods:
+***************
+*** 241,244 ****
+  <
+  
+  ==============================================================================
+!  vim:tw=78:ts=8:ft=help:norl:
+--- 312,340 ----
+  <
+  
+  ==============================================================================
+! 7. The luaeval function					*lua-luaeval*
+! 
+! The (dual) equivalent of "vim.eval" for passing Lua values to Vim is
+! "luaeval". "luaeval" takes an expression string and an optional argument and
+! returns the result of the expression. It is semantically equivalent in Lua to:
+! >
+! 	local chunkheader = "local _A = select(1, ...) return "
+! 	function luaeval (expstr, arg)
+! 	    local chunk = assert(loadstring(chunkheader .. expstr, "luaeval"))
+! 	    return chunk(arg) -- return typval
+! 	end
+! <
+! Note that "_A" receives the argument to "luaeval". Examples: >
+! 
+! 	:echo luaeval('math.pi')
+! 	:lua a = vim.list():add('newlist')
+! 	:let a = luaeval('a')
+! 	:echo a[0] " 'newlist'
+! 	:function Rand(x,y) " random uniform between x and y
+! 	:  return luaeval('(_A.y-_A.x)*math.random()+_A.x', {'x':a:x,'y':a:y})
+! 	:  endfunction
+! 	:echo Rand(1,10)
+! 
+! 
+! ==============================================================================
+!  vim:tw=78:ts=8:noet:ft=help:norl:
+*** ../vim-7.3.489/src/eval.c	2012-03-28 16:49:25.000000000 +0200
+--- src/eval.c	2012-04-05 16:41:35.000000000 +0200
+***************
+*** 622,627 ****
+--- 622,630 ----
+  static void f_log __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_log10 __ARGS((typval_T *argvars, typval_T *rettv));
+  #endif
++ #ifdef FEAT_LUA
++ static void f_luaeval __ARGS((typval_T *argvars, typval_T *rettv));
++ #endif
+  static void f_map __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_maparg __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_mapcheck __ARGS((typval_T *argvars, typval_T *rettv));
+***************
+*** 6777,6782 ****
+--- 6780,6789 ----
+      /* v: vars */
+      set_ref_in_ht(&vimvarht, copyID);
+  
++ #ifdef FEAT_LUA
++     set_ref_in_lua(copyID);
++ #endif
++ 
+      /*
+       * 2. Free lists and dictionaries that are not referenced.
+       */
+***************
+*** 7946,7951 ****
+--- 7953,7961 ----
+      {"log",		1, 1, f_log},
+      {"log10",		1, 1, f_log10},
+  #endif
++ #ifdef FEAT_LUA
++     {"luaeval",         1, 2, f_luaeval},
++ #endif
+      {"map",		2, 2, f_map},
+      {"maparg",		1, 4, f_maparg},
+      {"mapcheck",	1, 3, f_mapcheck},
+***************
+*** 13626,13631 ****
+--- 13636,13658 ----
+  }
+  #endif
+  
++ #ifdef FEAT_LUA
++ /*
++  * "luaeval()" function
++  */
++     static void
++ f_luaeval(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     char_u	*str;
++     char_u	buf[NUMBUFLEN];
++ 
++     str = get_tv_string_buf(&argvars[0], buf);
++     do_luaeval(str, argvars + 1, rettv);
++ }
++ #endif
++ 
+  /*
+   * "map()" function
+   */
+*** ../vim-7.3.489/src/if_lua.c	2011-12-08 16:00:12.000000000 +0100
+--- src/if_lua.c	2012-04-05 16:41:35.000000000 +0200
+***************
+*** 1,4 ****
+! /* vi:set ts=8 sts=4 sw=4:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+--- 1,4 ----
+! /* vi:set ts=8 sts=4 sw=4 noet:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+***************
+*** 21,35 ****
+--- 21,53 ----
+  
+  #define LUAVIM_CHUNKNAME "vim chunk"
+  #define LUAVIM_NAME "vim"
++ #define LUAVIM_EVALNAME "luaeval"
++ #define LUAVIM_EVALHEADER "local _A=select(1,...) return "
+  
+  typedef buf_T *luaV_Buffer;
+  typedef win_T *luaV_Window;
++ typedef dict_T *luaV_Dict;
++ typedef list_T *luaV_List;
+  typedef void (*msgfunc_T)(char_u *);
+  
++ static const char LUAVIM_DICT[] = "dict";
++ static const char LUAVIM_LIST[] = "list";
+  static const char LUAVIM_BUFFER[] = "buffer";
+  static const char LUAVIM_WINDOW[] = "window";
+  static const char LUAVIM_FREE[] = "luaV_free";
++ static const char LUAVIM_LUAEVAL[] = "luaV_luaeval";
++ static const char LUAVIM_SETREF[] = "luaV_setref";
+  
++ /* most functions are closures with a cache table as first upvalue;
++  * get/setudata manage references to vim userdata in cache table through
++  * object pointers (light userdata) */
++ #define luaV_getudata(L, v) \
++     lua_pushlightuserdata((L), (void *) (v)); \
++     lua_rawget((L), lua_upvalueindex(1))
++ #define luaV_setudata(L, v) \
++     lua_pushlightuserdata((L), (void *) (v)); \
++     lua_pushvalue((L), -2); \
++     lua_rawset((L), lua_upvalueindex(1))
+  #define luaV_getfield(L, s) \
+      lua_pushlightuserdata((L), (void *)(s)); \
+      lua_rawget((L), LUA_REGISTRYINDEX)
+***************
+*** 38,43 ****
+--- 56,70 ----
+  #define luaV_msg(L) luaV_msgfunc((L), (msgfunc_T) msg)
+  #define luaV_emsg(L) luaV_msgfunc((L), (msgfunc_T) emsg)
+  
++ static luaV_List *luaV_pushlist (lua_State *L, list_T *lis);
++ static luaV_Dict *luaV_pushdict (lua_State *L, dict_T *dic);
++ 
++ #if LUA_VERSION_NUM <= 501
++ #define luaV_openlib(L, l, n) luaL_openlib(L, NULL, l, n)
++ #define luaL_typeerror luaL_typerror
++ #else
++ #define luaV_openlib luaL_setfuncs
++ #endif
+  
+  #ifdef DYNAMIC_LUA
+  
+***************
+*** 54,85 ****
+  #endif
+  
+  /* lauxlib */
+  #define luaL_register dll_luaL_register
+  #define luaL_typerror dll_luaL_typerror
+  #define luaL_checklstring dll_luaL_checklstring
+  #define luaL_checkinteger dll_luaL_checkinteger
+  #define luaL_optinteger dll_luaL_optinteger
+  #define luaL_checktype dll_luaL_checktype
+  #define luaL_error dll_luaL_error
+- #define luaL_loadfile dll_luaL_loadfile
+- #define luaL_loadbuffer dll_luaL_loadbuffer
+  #define luaL_newstate dll_luaL_newstate
+  #define luaL_buffinit dll_luaL_buffinit
+- #define luaL_prepbuffer dll_luaL_prepbuffer
+  #define luaL_addlstring dll_luaL_addlstring
+  #define luaL_pushresult dll_luaL_pushresult
+  /* lua */
+  #define lua_close dll_lua_close
+  #define lua_gettop dll_lua_gettop
+  #define lua_settop dll_lua_settop
+  #define lua_pushvalue dll_lua_pushvalue
+  #define lua_replace dll_lua_replace
+  #define lua_isnumber dll_lua_isnumber
+  #define lua_isstring dll_lua_isstring
+  #define lua_type dll_lua_type
+  #define lua_rawequal dll_lua_rawequal
+- #define lua_tonumber dll_lua_tonumber
+- #define lua_tointeger dll_lua_tointeger
+  #define lua_toboolean dll_lua_toboolean
+  #define lua_tolstring dll_lua_tolstring
+  #define lua_touserdata dll_lua_touserdata
+--- 81,134 ----
+  #endif
+  
+  /* lauxlib */
++ #if LUA_VERSION_NUM <= 501
+  #define luaL_register dll_luaL_register
++ #define luaL_prepbuffer dll_luaL_prepbuffer
++ #define luaL_openlib dll_luaL_openlib
+  #define luaL_typerror dll_luaL_typerror
++ #define luaL_loadfile dll_luaL_loadfile
++ #define luaL_loadbuffer dll_luaL_loadbuffer
++ #else
++ #define luaL_prepbuffsize dll_luaL_prepbuffsize
++ #define luaL_setfuncs dll_luaL_setfuncs
++ #define luaL_loadfilex dll_luaL_loadfilex
++ #define luaL_loadbufferx dll_luaL_loadbufferx
++ #define luaL_argerror dll_luaL_argerror
++ #endif
+  #define luaL_checklstring dll_luaL_checklstring
+  #define luaL_checkinteger dll_luaL_checkinteger
+  #define luaL_optinteger dll_luaL_optinteger
+  #define luaL_checktype dll_luaL_checktype
+  #define luaL_error dll_luaL_error
+  #define luaL_newstate dll_luaL_newstate
+  #define luaL_buffinit dll_luaL_buffinit
+  #define luaL_addlstring dll_luaL_addlstring
+  #define luaL_pushresult dll_luaL_pushresult
+  /* lua */
++ #if LUA_VERSION_NUM <= 501
++ #define lua_tonumber dll_lua_tonumber
++ #define lua_tointeger dll_lua_tointeger
++ #define lua_call dll_lua_call
++ #define lua_pcall dll_lua_pcall
++ #else
++ #define lua_tonumberx dll_lua_tonumberx
++ #define lua_tointegerx dll_lua_tointegerx
++ #define lua_callk dll_lua_callk
++ #define lua_pcallk dll_lua_pcallk
++ #define lua_getglobal dll_lua_getglobal
++ #define lua_setglobal dll_lua_setglobal
++ #define lua_typename dll_lua_typename
++ #endif
+  #define lua_close dll_lua_close
+  #define lua_gettop dll_lua_gettop
+  #define lua_settop dll_lua_settop
+  #define lua_pushvalue dll_lua_pushvalue
+  #define lua_replace dll_lua_replace
++ #define lua_remove dll_lua_remove
+  #define lua_isnumber dll_lua_isnumber
+  #define lua_isstring dll_lua_isstring
+  #define lua_type dll_lua_type
+  #define lua_rawequal dll_lua_rawequal
+  #define lua_toboolean dll_lua_toboolean
+  #define lua_tolstring dll_lua_tolstring
+  #define lua_touserdata dll_lua_touserdata
+***************
+*** 94,109 ****
+  #define lua_pushlightuserdata dll_lua_pushlightuserdata
+  #define lua_getfield dll_lua_getfield
+  #define lua_rawget dll_lua_rawget
+  #define lua_createtable dll_lua_createtable
+  #define lua_newuserdata dll_lua_newuserdata
+  #define lua_getmetatable dll_lua_getmetatable
+  #define lua_setfield dll_lua_setfield
+  #define lua_rawset dll_lua_rawset
+  #define lua_rawseti dll_lua_rawseti
+- #define lua_remove dll_lua_remove
+  #define lua_setmetatable dll_lua_setmetatable
+- #define lua_call dll_lua_call
+- #define lua_pcall dll_lua_pcall
+  /* libs */
+  #define luaopen_base dll_luaopen_base
+  #define luaopen_table dll_luaopen_table
+--- 143,156 ----
+  #define lua_pushlightuserdata dll_lua_pushlightuserdata
+  #define lua_getfield dll_lua_getfield
+  #define lua_rawget dll_lua_rawget
++ #define lua_rawgeti dll_lua_rawgeti
+  #define lua_createtable dll_lua_createtable
+  #define lua_newuserdata dll_lua_newuserdata
+  #define lua_getmetatable dll_lua_getmetatable
+  #define lua_setfield dll_lua_setfield
+  #define lua_rawset dll_lua_rawset
+  #define lua_rawseti dll_lua_rawseti
+  #define lua_setmetatable dll_lua_setmetatable
+  /* libs */
+  #define luaopen_base dll_luaopen_base
+  #define luaopen_table dll_luaopen_table
+***************
+*** 116,147 ****
+  #define luaL_openlibs dll_luaL_openlibs
+  
+  /* lauxlib */
+  void (*dll_luaL_register) (lua_State *L, const char *libname, const luaL_Reg *l);
+  int (*dll_luaL_typerror) (lua_State *L, int narg, const char *tname);
+  const char *(*dll_luaL_checklstring) (lua_State *L, int numArg, size_t *l);
+  lua_Integer (*dll_luaL_checkinteger) (lua_State *L, int numArg);
+  lua_Integer (*dll_luaL_optinteger) (lua_State *L, int nArg, lua_Integer def);
+  void (*dll_luaL_checktype) (lua_State *L, int narg, int t);
+  int (*dll_luaL_error) (lua_State *L, const char *fmt, ...);
+- int (*dll_luaL_loadfile) (lua_State *L, const char *filename);
+- int (*dll_luaL_loadbuffer) (lua_State *L, const char *buff, size_t sz, const char *name);
+  lua_State *(*dll_luaL_newstate) (void);
+  void (*dll_luaL_buffinit) (lua_State *L, luaL_Buffer *B);
+- char *(*dll_luaL_prepbuffer) (luaL_Buffer *B);
+  void (*dll_luaL_addlstring) (luaL_Buffer *B, const char *s, size_t l);
+  void (*dll_luaL_pushresult) (luaL_Buffer *B);
+  /* lua */
+  void       (*dll_lua_close) (lua_State *L);
+  int (*dll_lua_gettop) (lua_State *L);
+  void (*dll_lua_settop) (lua_State *L, int idx);
+  void (*dll_lua_pushvalue) (lua_State *L, int idx);
+  void (*dll_lua_replace) (lua_State *L, int idx);
+  int (*dll_lua_isnumber) (lua_State *L, int idx);
+  int (*dll_lua_isstring) (lua_State *L, int idx);
+  int (*dll_lua_type) (lua_State *L, int idx);
+  int (*dll_lua_rawequal) (lua_State *L, int idx1, int idx2);
+- lua_Number (*dll_lua_tonumber) (lua_State *L, int idx);
+- lua_Integer (*dll_lua_tointeger) (lua_State *L, int idx);
+  int (*dll_lua_toboolean) (lua_State *L, int idx);
+  const char *(*dll_lua_tolstring) (lua_State *L, int idx, size_t *len);
+  void *(*dll_lua_touserdata) (lua_State *L, int idx);
+--- 163,218 ----
+  #define luaL_openlibs dll_luaL_openlibs
+  
+  /* lauxlib */
++ #if LUA_VERSION_NUM <= 501
+  void (*dll_luaL_register) (lua_State *L, const char *libname, const luaL_Reg *l);
++ char *(*dll_luaL_prepbuffer) (luaL_Buffer *B);
++ void (*dll_luaL_openlib) (lua_State *L, const char *libname, const luaL_Reg *l, int nup);
+  int (*dll_luaL_typerror) (lua_State *L, int narg, const char *tname);
++ int (*dll_luaL_loadfile) (lua_State *L, const char *filename);
++ int (*dll_luaL_loadbuffer) (lua_State *L, const char *buff, size_t sz, const char *name);
++ #else
++ char *(*dll_luaL_prepbuffsize) (luaL_Buffer *B, size_t sz);
++ void (*dll_luaL_setfuncs) (lua_State *L, const luaL_Reg *l, int nup);
++ int (*dll_luaL_loadfilex) (lua_State *L, const char *filename, const char *mode);
++ int (*dll_luaL_loadbufferx) (lua_State *L, const char *buff, size_t sz, const char *name, const char *mode);
++ int (*dll_luaL_argerror) (lua_State *L, int numarg, const char *extramsg);
++ #endif
+  const char *(*dll_luaL_checklstring) (lua_State *L, int numArg, size_t *l);
+  lua_Integer (*dll_luaL_checkinteger) (lua_State *L, int numArg);
+  lua_Integer (*dll_luaL_optinteger) (lua_State *L, int nArg, lua_Integer def);
+  void (*dll_luaL_checktype) (lua_State *L, int narg, int t);
+  int (*dll_luaL_error) (lua_State *L, const char *fmt, ...);
+  lua_State *(*dll_luaL_newstate) (void);
+  void (*dll_luaL_buffinit) (lua_State *L, luaL_Buffer *B);
+  void (*dll_luaL_addlstring) (luaL_Buffer *B, const char *s, size_t l);
+  void (*dll_luaL_pushresult) (luaL_Buffer *B);
+  /* lua */
++ #if LUA_VERSION_NUM <= 501
++ lua_Number (*dll_lua_tonumber) (lua_State *L, int idx);
++ lua_Integer (*dll_lua_tointeger) (lua_State *L, int idx);
++ void (*dll_lua_call) (lua_State *L, int nargs, int nresults);
++ int (*dll_lua_pcall) (lua_State *L, int nargs, int nresults, int errfunc);
++ #else
++ lua_Number (*dll_lua_tonumberx) (lua_State *L, int idx, int *isnum);
++ lua_Integer (*dll_lua_tointegerx) (lua_State *L, int idx, int *isnum);
++ void (*dll_lua_callk) (lua_State *L, int nargs, int nresults, int ctx,
++         lua_CFunction k);
++ int (*dll_lua_pcallk) (lua_State *L, int nargs, int nresults, int errfunc,
++         int ctx, lua_CFunction k);
++ void (*dll_lua_getglobal) (lua_State *L, const char *var);
++ void (*dll_lua_setglobal) (lua_State *L, const char *var);
++ const char *(*dll_lua_typename) (lua_State *L, int tp);
++ #endif
+  void       (*dll_lua_close) (lua_State *L);
+  int (*dll_lua_gettop) (lua_State *L);
+  void (*dll_lua_settop) (lua_State *L, int idx);
+  void (*dll_lua_pushvalue) (lua_State *L, int idx);
+  void (*dll_lua_replace) (lua_State *L, int idx);
++ void (*dll_lua_remove) (lua_State *L, int idx);
+  int (*dll_lua_isnumber) (lua_State *L, int idx);
+  int (*dll_lua_isstring) (lua_State *L, int idx);
+  int (*dll_lua_type) (lua_State *L, int idx);
+  int (*dll_lua_rawequal) (lua_State *L, int idx1, int idx2);
+  int (*dll_lua_toboolean) (lua_State *L, int idx);
+  const char *(*dll_lua_tolstring) (lua_State *L, int idx, size_t *len);
+  void *(*dll_lua_touserdata) (lua_State *L, int idx);
+***************
+*** 156,171 ****
+  void (*dll_lua_pushlightuserdata) (lua_State *L, void *p);
+  void (*dll_lua_getfield) (lua_State *L, int idx, const char *k);
+  void (*dll_lua_rawget) (lua_State *L, int idx);
+  void (*dll_lua_createtable) (lua_State *L, int narr, int nrec);
+  void *(*dll_lua_newuserdata) (lua_State *L, size_t sz);
+  int (*dll_lua_getmetatable) (lua_State *L, int objindex);
+  void (*dll_lua_setfield) (lua_State *L, int idx, const char *k);
+  void (*dll_lua_rawset) (lua_State *L, int idx);
+  void (*dll_lua_rawseti) (lua_State *L, int idx, int n);
+- void (*dll_lua_remove) (lua_State *L, int idx);
+  int (*dll_lua_setmetatable) (lua_State *L, int objindex);
+- void (*dll_lua_call) (lua_State *L, int nargs, int nresults);
+- int (*dll_lua_pcall) (lua_State *L, int nargs, int nresults, int errfunc);
+  /* libs */
+  int (*dll_luaopen_base) (lua_State *L);
+  int (*dll_luaopen_table) (lua_State *L);
+--- 227,240 ----
+  void (*dll_lua_pushlightuserdata) (lua_State *L, void *p);
+  void (*dll_lua_getfield) (lua_State *L, int idx, const char *k);
+  void (*dll_lua_rawget) (lua_State *L, int idx);
++ void (*dll_lua_rawgeti) (lua_State *L, int idx, int n);
+  void (*dll_lua_createtable) (lua_State *L, int narr, int nrec);
+  void *(*dll_lua_newuserdata) (lua_State *L, size_t sz);
+  int (*dll_lua_getmetatable) (lua_State *L, int objindex);
+  void (*dll_lua_setfield) (lua_State *L, int idx, const char *k);
+  void (*dll_lua_rawset) (lua_State *L, int idx);
+  void (*dll_lua_rawseti) (lua_State *L, int idx, int n);
+  int (*dll_lua_setmetatable) (lua_State *L, int objindex);
+  /* libs */
+  int (*dll_luaopen_base) (lua_State *L);
+  int (*dll_luaopen_table) (lua_State *L);
+***************
+*** 185,216 ****
+  
+  static const luaV_Reg luaV_dll[] = {
+      /* lauxlib */
+      {"luaL_register", (luaV_function) &dll_luaL_register},
+      {"luaL_typerror", (luaV_function) &dll_luaL_typerror},
+      {"luaL_checklstring", (luaV_function) &dll_luaL_checklstring},
+      {"luaL_checkinteger", (luaV_function) &dll_luaL_checkinteger},
+      {"luaL_optinteger", (luaV_function) &dll_luaL_optinteger},
+      {"luaL_checktype", (luaV_function) &dll_luaL_checktype},
+      {"luaL_error", (luaV_function) &dll_luaL_error},
+-     {"luaL_loadfile", (luaV_function) &dll_luaL_loadfile},
+-     {"luaL_loadbuffer", (luaV_function) &dll_luaL_loadbuffer},
+      {"luaL_newstate", (luaV_function) &dll_luaL_newstate},
+      {"luaL_buffinit", (luaV_function) &dll_luaL_buffinit},
+-     {"luaL_prepbuffer", (luaV_function) &dll_luaL_prepbuffer},
+      {"luaL_addlstring", (luaV_function) &dll_luaL_addlstring},
+      {"luaL_pushresult", (luaV_function) &dll_luaL_pushresult},
+      /* lua */
+      {"lua_close", (luaV_function) &dll_lua_close},
+      {"lua_gettop", (luaV_function) &dll_lua_gettop},
+      {"lua_settop", (luaV_function) &dll_lua_settop},
+      {"lua_pushvalue", (luaV_function) &dll_lua_pushvalue},
+      {"lua_replace", (luaV_function) &dll_lua_replace},
+      {"lua_isnumber", (luaV_function) &dll_lua_isnumber},
+      {"lua_isstring", (luaV_function) &dll_lua_isstring},
+      {"lua_type", (luaV_function) &dll_lua_type},
+      {"lua_rawequal", (luaV_function) &dll_lua_rawequal},
+-     {"lua_tonumber", (luaV_function) &dll_lua_tonumber},
+-     {"lua_tointeger", (luaV_function) &dll_lua_tointeger},
+      {"lua_toboolean", (luaV_function) &dll_lua_toboolean},
+      {"lua_tolstring", (luaV_function) &dll_lua_tolstring},
+      {"lua_touserdata", (luaV_function) &dll_lua_touserdata},
+--- 254,307 ----
+  
+  static const luaV_Reg luaV_dll[] = {
+      /* lauxlib */
++ #if LUA_VERSION_NUM <= 501
+      {"luaL_register", (luaV_function) &dll_luaL_register},
++     {"luaL_prepbuffer", (luaV_function) &dll_luaL_prepbuffer},
++     {"luaL_openlib", (luaV_function) &dll_luaL_openlib},
+      {"luaL_typerror", (luaV_function) &dll_luaL_typerror},
++     {"luaL_loadfile", (luaV_function) &dll_luaL_loadfile},
++     {"luaL_loadbuffer", (luaV_function) &dll_luaL_loadbuffer},
++ #else
++     {"luaL_prepbuffsize", (luaV_function) &dll_luaL_prepbuffsize},
++     {"luaL_setfuncs", (luaV_function) &dll_luaL_setfuncs},
++     {"luaL_loadfilex", (luaV_function) &dll_luaL_loadfilex},
++     {"luaL_loadbufferx", (luaV_function) &dll_luaL_loadbufferx},
++     {"luaL_argerror", (luaV_function) &dll_luaL_argerror},
++ #endif
+      {"luaL_checklstring", (luaV_function) &dll_luaL_checklstring},
+      {"luaL_checkinteger", (luaV_function) &dll_luaL_checkinteger},
+      {"luaL_optinteger", (luaV_function) &dll_luaL_optinteger},
+      {"luaL_checktype", (luaV_function) &dll_luaL_checktype},
+      {"luaL_error", (luaV_function) &dll_luaL_error},
+      {"luaL_newstate", (luaV_function) &dll_luaL_newstate},
+      {"luaL_buffinit", (luaV_function) &dll_luaL_buffinit},
+      {"luaL_addlstring", (luaV_function) &dll_luaL_addlstring},
+      {"luaL_pushresult", (luaV_function) &dll_luaL_pushresult},
+      /* lua */
++ #if LUA_VERSION_NUM <= 501
++     {"lua_tonumber", (luaV_function) &dll_lua_tonumber},
++     {"lua_tointeger", (luaV_function) &dll_lua_tointeger},
++     {"lua_call", (luaV_function) &dll_lua_call},
++     {"lua_pcall", (luaV_function) &dll_lua_pcall},
++ #else
++     {"lua_tonumberx", (luaV_function) &dll_lua_tonumberx},
++     {"lua_tointegerx", (luaV_function) &dll_lua_tointegerx},
++     {"lua_callk", (luaV_function) &dll_lua_callk},
++     {"lua_pcallk", (luaV_function) &dll_lua_pcallk},
++     {"lua_getglobal", (luaV_function) &dll_lua_getglobal},
++     {"lua_setglobal", (luaV_function) &dll_lua_setglobal},
++     {"lua_typename", (luaV_function) &dll_lua_typename},
++ #endif
+      {"lua_close", (luaV_function) &dll_lua_close},
+      {"lua_gettop", (luaV_function) &dll_lua_gettop},
+      {"lua_settop", (luaV_function) &dll_lua_settop},
+      {"lua_pushvalue", (luaV_function) &dll_lua_pushvalue},
+      {"lua_replace", (luaV_function) &dll_lua_replace},
++     {"lua_remove", (luaV_function) &dll_lua_remove},
+      {"lua_isnumber", (luaV_function) &dll_lua_isnumber},
+      {"lua_isstring", (luaV_function) &dll_lua_isstring},
+      {"lua_type", (luaV_function) &dll_lua_type},
+      {"lua_rawequal", (luaV_function) &dll_lua_rawequal},
+      {"lua_toboolean", (luaV_function) &dll_lua_toboolean},
+      {"lua_tolstring", (luaV_function) &dll_lua_tolstring},
+      {"lua_touserdata", (luaV_function) &dll_lua_touserdata},
+***************
+*** 225,240 ****
+      {"lua_pushlightuserdata", (luaV_function) &dll_lua_pushlightuserdata},
+      {"lua_getfield", (luaV_function) &dll_lua_getfield},
+      {"lua_rawget", (luaV_function) &dll_lua_rawget},
+      {"lua_createtable", (luaV_function) &dll_lua_createtable},
+      {"lua_newuserdata", (luaV_function) &dll_lua_newuserdata},
+      {"lua_getmetatable", (luaV_function) &dll_lua_getmetatable},
+      {"lua_setfield", (luaV_function) &dll_lua_setfield},
+      {"lua_rawset", (luaV_function) &dll_lua_rawset},
+      {"lua_rawseti", (luaV_function) &dll_lua_rawseti},
+-     {"lua_remove", (luaV_function) &dll_lua_remove},
+      {"lua_setmetatable", (luaV_function) &dll_lua_setmetatable},
+-     {"lua_call", (luaV_function) &dll_lua_call},
+-     {"lua_pcall", (luaV_function) &dll_lua_pcall},
+      /* libs */
+      {"luaopen_base", (luaV_function) &dll_luaopen_base},
+      {"luaopen_table", (luaV_function) &dll_luaopen_table},
+--- 316,329 ----
+      {"lua_pushlightuserdata", (luaV_function) &dll_lua_pushlightuserdata},
+      {"lua_getfield", (luaV_function) &dll_lua_getfield},
+      {"lua_rawget", (luaV_function) &dll_lua_rawget},
++     {"lua_rawgeti", (luaV_function) &dll_lua_rawgeti},
+      {"lua_createtable", (luaV_function) &dll_lua_createtable},
+      {"lua_newuserdata", (luaV_function) &dll_lua_newuserdata},
+      {"lua_getmetatable", (luaV_function) &dll_lua_getmetatable},
+      {"lua_setfield", (luaV_function) &dll_lua_setfield},
+      {"lua_rawset", (luaV_function) &dll_lua_rawset},
+      {"lua_rawseti", (luaV_function) &dll_lua_rawseti},
+      {"lua_setmetatable", (luaV_function) &dll_lua_setmetatable},
+      /* libs */
+      {"luaopen_base", (luaV_function) &dll_luaopen_base},
+      {"luaopen_table", (luaV_function) &dll_luaopen_table},
+***************
+*** 294,299 ****
+--- 383,398 ----
+  
+  #endif /* DYNAMIC_LUA */
+  
++ #if LUA_VERSION_NUM > 501
++     static int
++ luaL_typeerror (lua_State *L, int narg, const char *tname)
++ {
++     const char *msg = lua_pushfstring(L, "%s expected, got %s",
++             tname, luaL_typename(L, narg));
++     return luaL_argerror(L, narg, msg);
++ }
++ #endif
++ 
+  
+  /* =======   Internal   ======= */
+  
+***************
+*** 327,343 ****
+  }
+  
+      static void *
+  luaV_checkudata(lua_State *L, int ud, const char *tname)
+  {
+      void *p = luaV_toudata(L, ud, tname);
+!     if (p == NULL) luaL_typerror(L, ud, tname);
+      return p;
+  }
+  
+      static void
+  luaV_pushtypval(lua_State *L, typval_T *tv)
+  {
+!     if (tv == NULL) luaL_error(L, "null type");
+      switch (tv->v_type)
+      {
+  	case VAR_STRING:
+--- 426,460 ----
+  }
+  
+      static void *
++ luaV_checkcache(lua_State *L, void *p)
++ {
++     luaV_getudata(L, p);
++     if (lua_isnil(L, -1)) luaL_error(L, "invalid object");
++     lua_pop(L, 1);
++     return p;
++ }
++ 
++ #define luaV_unbox(L,luatyp,ud) (*((luatyp *) lua_touserdata((L),(ud))))
++ 
++ #define luaV_checkvalid(L,luatyp,ud) \
++     luaV_checkcache((L), (void *) luaV_unbox((L),luatyp,(ud)))
++ 
++     static void *
+  luaV_checkudata(lua_State *L, int ud, const char *tname)
+  {
+      void *p = luaV_toudata(L, ud, tname);
+!     if (p == NULL) luaL_typeerror(L, ud, tname);
+      return p;
+  }
+  
+      static void
+  luaV_pushtypval(lua_State *L, typval_T *tv)
+  {
+!     if (tv == NULL)
+!     {
+! 	lua_pushnil(L);
+! 	return;
+!     }
+      switch (tv->v_type)
+      {
+  	case VAR_STRING:
+***************
+*** 351,418 ****
+  	    lua_pushnumber(L, (lua_Number) tv->vval.v_float);
+  	    break;
+  #endif
+! 	case VAR_LIST: {
+! 	    list_T *l = tv->vval.v_list;
+  
+! 	    if (l != NULL)
+  	    {
+! 		/* check cache */
+! 		lua_pushlightuserdata(L, (void *) l);
+! 		lua_rawget(L, LUA_ENVIRONINDEX);
+! 		if (lua_isnil(L, -1)) /* not interned? */
+  		{
+! 		    listitem_T *li;
+! 		    int n = 0;
+! 		    lua_pop(L, 1); /* nil */
+! 		    lua_newtable(L);
+! 		    lua_pushlightuserdata(L, (void *) l);
+! 		    lua_pushvalue(L, -2);
+! 		    lua_rawset(L, LUA_ENVIRONINDEX);
+! 		    for (li = l->lv_first; li != NULL; li = li->li_next)
+! 		    {
+! 			luaV_pushtypval(L, &li->li_tv);
+! 			lua_rawseti(L, -2, ++n);
+! 		    }
+  		}
+! 	    }
+! 	    else lua_pushnil(L);
+! 	    break;
+! 		       }
+! 	case VAR_DICT: {
+! 	    dict_T *d = tv->vval.v_dict;
+! 
+! 	    if (d != NULL)
+! 	    {
+! 		/* check cache */
+! 		lua_pushlightuserdata(L, (void *) d);
+! 		lua_rawget(L, LUA_ENVIRONINDEX);
+! 		if (lua_isnil(L, -1)) /* not interned? */
+  		{
+! 		    hashtab_T *ht = &d->dv_hashtab;
+! 		    hashitem_T *hi;
+! 		    int n = ht->ht_used; /* remaining items */
+! 		    lua_pop(L, 1); /* nil */
+! 		    lua_newtable(L);
+! 		    lua_pushlightuserdata(L, (void *) d);
+! 		    lua_pushvalue(L, -2);
+! 		    lua_rawset(L, LUA_ENVIRONINDEX);
+! 		    for (hi = ht->ht_array; n > 0; hi++)
+! 		    {
+! 			if (!HASHITEM_EMPTY(hi))
+! 			{
+! 			    dictitem_T *di = dict_lookup(hi);
+! 			    luaV_pushtypval(L, &di->di_tv);
+! 			    lua_setfield(L, -2, (char *) hi->hi_key);
+! 			    n--;
+! 			}
+! 		    }
+  		}
+  	    }
+- 	    else lua_pushnil(L);
+  	    break;
+  	}
+  	default:
+! 	    luaL_error(L, "invalid type");
+      }
+  }
+  
+--- 468,537 ----
+  	    lua_pushnumber(L, (lua_Number) tv->vval.v_float);
+  	    break;
+  #endif
+! 	case VAR_LIST:
+! 	    luaV_pushlist(L, tv->vval.v_list);
+! 	    break;
+! 	case VAR_DICT:
+! 	    luaV_pushdict(L, tv->vval.v_dict);
+! 	    break;
+! 	default:
+! 	    lua_pushnil(L);
+!     }
+! }
+  
+! /* converts lua value at 'pos' to typval 'tv' */
+!     static void
+! luaV_totypval (lua_State *L, int pos, typval_T *tv)
+! {
+!     switch(lua_type(L, pos)) {
+! 	case LUA_TBOOLEAN:
+! 	    tv->v_type = VAR_NUMBER;
+! 	    tv->vval.v_number = (varnumber_T) lua_toboolean(L, pos);
+! 	    break;
+! 	case LUA_TSTRING:
+! 	    tv->v_type = VAR_STRING;
+! 	    tv->vval.v_string = vim_strsave((char_u *) lua_tostring(L, pos));
+! 	    break;
+! 	case LUA_TNUMBER:
+! #ifdef FEAT_FLOAT
+! 	    tv->v_type = VAR_FLOAT;
+! 	    tv->vval.v_float = (float_T) lua_tonumber(L, pos);
+! #else
+! 	    tv->v_type = VAR_NUMBER;
+! 	    tv->vval.v_number = (varnumber_T) lua_tointeger(L, pos);
+! #endif
+! 	    break;
+! 	case LUA_TUSERDATA: {
+! 	    void *p = lua_touserdata(L, pos);
+! 	    if (lua_getmetatable(L, pos)) /* has metatable? */
+  	    {
+! 		/* check list */
+! 		luaV_getfield(L, LUAVIM_LIST);
+! 		if (lua_rawequal(L, -1, -2))
+  		{
+! 		    tv->v_type = VAR_LIST;
+! 		    tv->vval.v_list = *((luaV_List *) p);
+! 		    ++tv->vval.v_list->lv_refcount;
+! 		    lua_pop(L, 2); /* MTs */
+! 		    return;
+  		}
+! 		/* check dict */
+! 		luaV_getfield(L, LUAVIM_DICT);
+! 		if (lua_rawequal(L, -1, -3))
+  		{
+! 		    tv->v_type = VAR_DICT;
+! 		    tv->vval.v_dict = *((luaV_Dict *) p);
+! 		    ++tv->vval.v_dict->dv_refcount;
+! 		    lua_pop(L, 3); /* MTs */
+! 		    return;
+  		}
++ 		lua_pop(L, 3); /* MTs */
+  	    }
+  	    break;
+  	}
+  	default:
+! 	    tv->v_type = VAR_NUMBER;
+! 	    tv->vval.v_number = 0;
+      }
+  }
+  
+***************
+*** 481,569 ****
+      lua_pop(L, 2); /* original and modified strings */
+  }
+  
+  
+! /* =======   Buffer type   ======= */
+  
+!     static luaV_Buffer *
+! luaV_newbuffer(lua_State *L, buf_T *buf)
+  {
+!     luaV_Buffer *b = (luaV_Buffer *) lua_newuserdata(L, sizeof(luaV_Buffer));
+!     *b = buf;
+!     lua_pushlightuserdata(L, (void *) buf);
+!     lua_pushvalue(L, -2);
+!     lua_rawset(L, LUA_ENVIRONINDEX); /* env[buf] = udata */
+!     /* to avoid GC, store as key in env */
+!     lua_pushvalue(L, -1);
+!     lua_pushboolean(L, 1);
+!     lua_rawset(L, LUA_ENVIRONINDEX); /* env[udata] = true */
+!     /* set metatable */
+!     luaV_getfield(L, LUAVIM_BUFFER);
+      lua_setmetatable(L, -2);
+!     return b;
+  }
+  
+!     static luaV_Buffer *
+! luaV_pushbuffer (lua_State *L, buf_T *buf)
+  {
+!     luaV_Buffer *b = NULL;
+!     if (buf == NULL)
+! 	lua_pushnil(L);
+!     else {
+! 	lua_pushlightuserdata(L, (void *) buf);
+! 	lua_rawget(L, LUA_ENVIRONINDEX);
+! 	if (lua_isnil(L, -1)) /* not interned? */
+  	{
+! 	    lua_pop(L, 1);
+! 	    b = luaV_newbuffer(L, buf);
+  	}
+  	else
+! 	    b = (luaV_Buffer *) lua_touserdata(L, -1);
+      }
+!     return b;
+  }
+  
+! /* Buffer metamethods */
+  
+      static int
+! luaV_buffer_tostring(lua_State *L)
+  {
+!     lua_pushfstring(L, "%s: %p", LUAVIM_BUFFER, lua_touserdata(L, 1));
+      return 1;
+  }
+  
+      static int
+  luaV_buffer_len(lua_State *L)
+  {
+!     luaV_Buffer *b = lua_touserdata(L, 1);
+!     lua_pushinteger(L, (*b)->b_ml.ml_line_count);
+      return 1;
+  }
+  
+      static int
+  luaV_buffer_call(lua_State *L)
+  {
+!     luaV_Buffer *b = (luaV_Buffer *) lua_touserdata(L, 1);
+      lua_settop(L, 1);
+!     set_curbuf(*b, DOBUF_SPLIT);
+      return 1;
+  }
+  
+      static int
+  luaV_buffer_index(lua_State *L)
+  {
+!     luaV_Buffer *b = (luaV_Buffer *) lua_touserdata(L, 1);
+      linenr_T n = (linenr_T) lua_tointeger(L, 2);
+!     if (n > 0 && n <= (*b)->b_ml.ml_line_count)
+! 	luaV_pushline(L, *b, n);
+      else if (lua_isstring(L, 2))
+      {
+  	const char *s = lua_tostring(L, 2);
+  	if (strncmp(s, "name", 4) == 0)
+! 	    lua_pushstring(L, (char *) (*b)->b_sfname);
+  	else if (strncmp(s, "fname", 5) == 0)
+! 	    lua_pushstring(L, (char *) (*b)->b_ffname);
+  	else if (strncmp(s, "number", 6) == 0)
+! 	    lua_pushinteger(L, (*b)->b_fnum);
+  	/* methods */
+  	else if (strncmp(s,   "insert", 6) == 0
+  		|| strncmp(s, "next", 4) == 0
+--- 600,1107 ----
+      lua_pop(L, 2); /* original and modified strings */
+  }
+  
++ #define luaV_newtype(typ,tname,luatyp,luatname) \
++ 	static luatyp * \
++     luaV_new##tname (lua_State *L, typ *obj) \
++     { \
++ 	luatyp *o = (luatyp *) lua_newuserdata(L, sizeof(luatyp)); \
++ 	*o = obj; \
++ 	luaV_setudata(L, obj); /* cache[obj] = udata */ \
++ 	luaV_getfield(L, luatname); \
++ 	lua_setmetatable(L, -2); \
++ 	return o; \
++     }
++ 
++ #define luaV_pushtype(typ,tname,luatyp) \
++ 	static luatyp * \
++     luaV_push##tname (lua_State *L, typ *obj) \
++     { \
++ 	luatyp *o = NULL; \
++ 	if (obj == NULL) \
++ 	    lua_pushnil(L); \
++ 	else { \
++ 	    luaV_getudata(L, obj); \
++ 	    if (lua_isnil(L, -1)) /* not interned? */ \
++ 	    { \
++ 		lua_pop(L, 1); \
++ 		o = luaV_new##tname(L, obj); \
++ 	    } \
++ 	    else \
++ 		o = (luatyp *) lua_touserdata(L, -1); \
++ 	} \
++ 	return o; \
++     }
++ 
++ #define luaV_type_tostring(tname,luatname) \
++ 	static int \
++     luaV_##tname##_tostring (lua_State *L) \
++     { \
++ 	lua_pushfstring(L, "%s: %p", luatname, lua_touserdata(L, 1)); \
++ 	return 1; \
++     }
++ 
+  
+! /* adapted from eval.c */
+! 
+! #define listitem_alloc() (listitem_T *)alloc(sizeof(listitem_T))
+! 
+!     static listitem_T *
+! list_find (list_T *l, long n)
+! {
+!     listitem_T *li;
+!     if (l == NULL || n < -l->lv_len || n >= l->lv_len)
+! 	return NULL;
+!     if (n < 0) /* search backward? */
+! 	for (li = l->lv_last; n < -1; li = li->li_prev)
+! 	    n++;
+!     else /* search forward */
+! 	for (li = l->lv_first; n > 0; li = li->li_next)
+! 	    n--;
+!     return li;
+! }
+  
+!     static void
+! list_remove (list_T *l, listitem_T *li)
+  {
+!     listwatch_T *lw;
+!     --l->lv_len;
+!     /* fix watchers */
+!     for (lw = l->lv_watch; lw != NULL; lw = lw->lw_next)
+! 	if (lw->lw_item == li)
+! 	    lw->lw_item = li->li_next;
+!     /* fix list pointers */
+!     if (li->li_next == NULL) /* last? */
+! 	l->lv_last = li->li_prev;
+!     else
+! 	li->li_next->li_prev = li->li_prev;
+!     if (li->li_prev == NULL) /* first? */
+! 	l->lv_first = li->li_next;
+!     else
+! 	li->li_prev->li_next = li->li_next;
+!     l->lv_idx_item = NULL;
+! }
+! 
+!     static void
+! list_append(list_T *l, listitem_T *item)
+! {
+!     if (l->lv_last == NULL) /* empty list? */
+! 	l->lv_first = item;
+!     else
+! 	l->lv_last->li_next = item;
+!     item->li_prev = l->lv_last;
+!     item->li_next = NULL;
+!     l->lv_last = item;
+!     ++l->lv_len;
+! }
+! 
+!     static int
+! list_insert_tv(list_T *l, typval_T *tv, listitem_T *item)
+! {
+!     listitem_T	*ni = listitem_alloc();
+! 
+!     if (ni == NULL)
+! 	return FAIL;
+!     copy_tv(tv, &ni->li_tv);
+!     if (item == NULL)
+! 	list_append(l, ni);
+!     else
+!     {
+! 	ni->li_prev = item->li_prev;
+! 	ni->li_next = item;
+! 	if (item->li_prev == NULL)
+! 	{
+! 	    l->lv_first = ni;
+! 	    ++l->lv_idx;
+! 	}
+! 	else
+! 	{
+! 	    item->li_prev->li_next = ni;
+! 	    l->lv_idx_item = NULL;
+! 	}
+! 	item->li_prev = ni;
+! 	++l->lv_len;
+!     }
+!     return OK;
+! }
+! 
+! /* set references */
+! 
+! static void set_ref_in_tv (typval_T *tv, int copyID);
+! 
+!     static void
+! set_ref_in_dict(dict_T *d, int copyID)
+! {
+!     hashtab_T *ht = &d->dv_hashtab;
+!     int n = ht->ht_used;
+!     hashitem_T *hi;
+!     for (hi = ht->ht_array; n > 0; ++hi)
+! 	if (!HASHITEM_EMPTY(hi))
+! 	{
+! 	    dictitem_T *di = dict_lookup(hi);
+! 	    set_ref_in_tv(&di->di_tv, copyID);
+! 	    --n;
+! 	}
+! }
+! 
+!     static void
+! set_ref_in_list(list_T *l, int copyID)
+! {
+!     listitem_T *li;
+!     for (li = l->lv_first; li != NULL; li = li->li_next)
+! 	set_ref_in_tv(&li->li_tv, copyID);
+! }
+! 
+!     static void
+! set_ref_in_tv(typval_T *tv, int copyID)
+! {
+!     if (tv->v_type == VAR_LIST)
+!     {
+! 	list_T *l = tv->vval.v_list;
+! 	if (l != NULL && l->lv_copyID != copyID)
+! 	{
+! 	    l->lv_copyID = copyID;
+! 	    set_ref_in_list(l, copyID);
+! 	}
+!     }
+!     else if (tv->v_type == VAR_DICT)
+!     {
+! 	dict_T *d = tv->vval.v_dict;
+! 	if (d != NULL && d->dv_copyID != copyID)
+! 	{
+! 	    d->dv_copyID = copyID;
+! 	    set_ref_in_dict(d, copyID);
+! 	}
+!     }
+! }
+! 
+! 
+! /* =======   List type   ======= */
+! 
+!     static luaV_List *
+! luaV_newlist (lua_State *L, list_T *lis)
+! {
+!     luaV_List *l = (luaV_List *) lua_newuserdata(L, sizeof(luaV_List));
+!     *l = lis;
+!     lis->lv_refcount++; /* reference in Lua */
+!     luaV_setudata(L, lis); /* cache[lis] = udata */
+!     luaV_getfield(L, LUAVIM_LIST);
+      lua_setmetatable(L, -2);
+!     return l;
+  }
+  
+! luaV_pushtype(list_T, list, luaV_List)
+! luaV_type_tostring(list, LUAVIM_LIST)
+! 
+!     static int
+! luaV_list_gc (lua_State *L)
+  {
+!     list_unref(luaV_unbox(L, luaV_List, 1));
+!     return 0;
+! }
+! 
+!     static int
+! luaV_list_len (lua_State *L)
+! {
+!     list_T *l = luaV_unbox(L, luaV_List, 1);
+!     lua_pushinteger(L, (l == NULL) ? 0 : (int) l->lv_len);
+!     return 1;
+! }
+! 
+!     static int
+! luaV_list_iter (lua_State *L)
+! {
+!     listitem_T *li = (listitem_T *) lua_touserdata(L, lua_upvalueindex(2));
+!     if (li == NULL) return 0;
+!     luaV_pushtypval(L, &li->li_tv);
+!     lua_pushlightuserdata(L, (void *) li->li_next);
+!     lua_replace(L, lua_upvalueindex(2));
+!     return 1;
+! }
+! 
+!     static int
+! luaV_list_call (lua_State *L)
+! {
+!     list_T *l = luaV_unbox(L, luaV_List, 1);
+!     lua_pushvalue(L, lua_upvalueindex(1)); /* pass cache table along */
+!     lua_pushlightuserdata(L, (void *) l->lv_first);
+!     lua_pushcclosure(L, luaV_list_iter, 2);
+!     return 1;
+! }
+! 
+!     static int
+! luaV_list_index (lua_State *L)
+! {
+!     list_T *l = luaV_unbox(L, luaV_List, 1);
+!     if (lua_isnumber(L, 2)) /* list item? */
+!     {
+! 	listitem_T *li = list_find(l, (long) luaL_checkinteger(L, 2));
+! 	if (li == NULL)
+! 	    lua_pushnil(L);
+! 	else
+! 	    luaV_pushtypval(L, &li->li_tv);
+!     }
+!     else if (lua_isstring(L, 2)) /* method? */
+!     {
+! 	const char *s = lua_tostring(L, 2);
+! 	if (strncmp(s, "add", 3) == 0
+! 		|| strncmp(s, "insert", 6) == 0
+! 		|| strncmp(s, "extend", 6) == 0)
+  	{
+! 	    lua_getmetatable(L, 1);
+! 	    lua_getfield(L, -1, s);
+  	}
+  	else
+! 	    lua_pushnil(L);
+      }
+!     else
+! 	lua_pushnil(L);
+!     return 1;
+  }
+  
+!     static int
+! luaV_list_newindex (lua_State *L)
+! {
+!     list_T *l = luaV_unbox(L, luaV_List, 1);
+!     long n = (long) luaL_checkinteger(L, 2);
+!     listitem_T *li;
+!     if (l->lv_lock)
+! 	luaL_error(L, "list is locked");
+!     li = list_find(l, n);
+!     if (li == NULL) return 0;
+!     if (lua_isnil(L, 3)) /* remove? */
+!     {
+! 	list_remove(l, li);
+! 	clear_tv(&li->li_tv);
+! 	vim_free(li);
+!     }
+!     else
+!     {
+! 	typval_T v;
+! 	luaV_totypval(L, 3, &v);
+! 	clear_tv(&li->li_tv);
+! 	copy_tv(&v, &li->li_tv);
+!     }
+!     return 0;
+! }
+  
+      static int
+! luaV_list_add (lua_State *L)
+  {
+!     luaV_List *lis = luaV_checkudata(L, 1, LUAVIM_LIST);
+!     list_T *l = (list_T *) luaV_checkcache(L, (void *) *lis);
+!     listitem_T *li;
+!     if (l->lv_lock)
+! 	luaL_error(L, "list is locked");
+!     li = listitem_alloc();
+!     if (li != NULL)
+!     {
+! 	typval_T v;
+! 	lua_settop(L, 2);
+! 	luaV_totypval(L, 2, &v);
+! 	copy_tv(&v, &li->li_tv);
+! 	list_append(l, li);
+!     }
+!     lua_settop(L, 1);
+      return 1;
+  }
+  
+      static int
++ luaV_list_insert (lua_State *L)
++ {
++     luaV_List *lis = luaV_checkudata(L, 1, LUAVIM_LIST);
++     list_T *l = (list_T *) luaV_checkcache(L, (void *) *lis);
++     long pos = luaL_optlong(L, 3, 0);
++     listitem_T *li = NULL;
++     typval_T v;
++     if (l->lv_lock)
++ 	luaL_error(L, "list is locked");
++     if (pos < l->lv_len)
++     {
++ 	li = list_find(l, pos);
++ 	if (li == NULL)
++ 	    luaL_error(L, "invalid position");
++     }
++     lua_settop(L, 2);
++     luaV_totypval(L, 2, &v);
++     list_insert_tv(l, &v, li);
++     lua_settop(L, 1);
++     return 1;
++ }
++ 
++ static const luaL_Reg luaV_List_mt[] = {
++     {"__tostring", luaV_list_tostring},
++     {"__gc", luaV_list_gc},
++     {"__len", luaV_list_len},
++     {"__call", luaV_list_call},
++     {"__index", luaV_list_index},
++     {"__newindex", luaV_list_newindex},
++     {"add", luaV_list_add},
++     {"insert", luaV_list_insert},
++     {NULL, NULL}
++ };
++ 
++ 
++ /* =======   Dict type   ======= */
++ 
++     static luaV_Dict *
++ luaV_newdict (lua_State *L, dict_T *dic)
++ {
++     luaV_Dict *d = (luaV_Dict *) lua_newuserdata(L, sizeof(luaV_Dict));
++     *d = dic;
++     dic->dv_refcount++; /* reference in Lua */
++     luaV_setudata(L, dic); /* cache[dic] = udata */
++     luaV_getfield(L, LUAVIM_DICT);
++     lua_setmetatable(L, -2);
++     return d;
++ }
++ 
++ luaV_pushtype(dict_T, dict, luaV_Dict)
++ luaV_type_tostring(dict, LUAVIM_DICT)
++ 
++     static int
++ luaV_dict_gc (lua_State *L)
++ {
++     dict_unref(luaV_unbox(L, luaV_Dict, 1));
++     return 0;
++ }
++ 
++     static int
++ luaV_dict_len (lua_State *L)
++ {
++     dict_T *d = luaV_unbox(L, luaV_Dict, 1);
++     lua_pushinteger(L, (d == NULL) ? 0 : (int) d->dv_hashtab.ht_used);
++     return 1;
++ }
++ 
++     static int
++ luaV_dict_iter (lua_State *L)
++ {
++     hashitem_T *hi = (hashitem_T *) lua_touserdata(L, lua_upvalueindex(2));
++     int n = lua_tointeger(L, lua_upvalueindex(3));
++     dictitem_T *di;
++     if (n <= 0) return 0;
++     while (HASHITEM_EMPTY(hi)) hi++;
++     di = dict_lookup(hi);
++     lua_pushstring(L, (char *) hi->hi_key);
++     luaV_pushtypval(L, &di->di_tv);
++     lua_pushlightuserdata(L, (void *) (hi + 1));
++     lua_replace(L, lua_upvalueindex(2));
++     lua_pushinteger(L, n - 1);
++     lua_replace(L, lua_upvalueindex(3));
++     return 2;
++ }
++ 
++     static int
++ luaV_dict_call (lua_State *L)
++ {
++     dict_T *d = luaV_unbox(L, luaV_Dict, 1);
++     hashtab_T *ht = &d->dv_hashtab;
++     lua_pushvalue(L, lua_upvalueindex(1)); /* pass cache table along */
++     lua_pushlightuserdata(L, (void *) ht->ht_array);
++     lua_pushinteger(L, ht->ht_used); /* # remaining items */
++     lua_pushcclosure(L, luaV_dict_iter, 3);
++     return 1;
++ }
++ 
++     static int
++ luaV_dict_index (lua_State *L)
++ {
++     dict_T *d = luaV_unbox(L, luaV_Dict, 1);
++     char_u *key = (char_u *) luaL_checkstring(L, 2);
++     dictitem_T *di = dict_find(d, key, -1);
++     if (di == NULL)
++ 	lua_pushnil(L);
++     else
++ 	luaV_pushtypval(L, &di->di_tv);
++     return 1;
++ }
++ 
++     static int
++ luaV_dict_newindex (lua_State *L)
++ {
++     dict_T *d = luaV_unbox(L, luaV_Dict, 1);
++     char_u *key = (char_u *) luaL_checkstring(L, 2);
++     dictitem_T *di;
++     if (d->dv_lock)
++ 	luaL_error(L, "dict is locked");
++     di = dict_find(d, key, -1);
++     if (di == NULL) /* non-existing key? */
++     {
++ 	if (lua_isnil(L, 3)) return 0;
++ 	di = dictitem_alloc(key);
++ 	if (di == NULL) return 0;
++ 	if (dict_add(d, di) == FAIL)
++ 	{
++ 		vim_free(di);
++ 		return 0;
++ 	}
++     }
++     else
++ 	clear_tv(&di->di_tv);
++     if (lua_isnil(L, 3)) /* remove? */
++     {
++ 	hashitem_T *hi = hash_find(&d->dv_hashtab, di->di_key);
++ 	hash_remove(&d->dv_hashtab, hi);
++ 	dictitem_free(di);
++     }
++     else {
++ 	typval_T v;
++ 	luaV_totypval(L, 3, &v);
++ 	copy_tv(&v, &di->di_tv);
++     }
++     return 0;
++ }
++ 
++ static const luaL_Reg luaV_Dict_mt[] = {
++     {"__tostring", luaV_dict_tostring},
++     {"__gc", luaV_dict_gc},
++     {"__len", luaV_dict_len},
++     {"__call", luaV_dict_call},
++     {"__index", luaV_dict_index},
++     {"__newindex", luaV_dict_newindex},
++     {NULL, NULL}
++ };
++ 
++ 
++ /* =======   Buffer type   ======= */
++ 
++ luaV_newtype(buf_T, buffer, luaV_Buffer, LUAVIM_BUFFER)
++ luaV_pushtype(buf_T, buffer, luaV_Buffer)
++ luaV_type_tostring(buffer, LUAVIM_BUFFER)
++ 
++     static int
+  luaV_buffer_len(lua_State *L)
+  {
+!     buf_T *b = (buf_T *) luaV_checkvalid(L, luaV_Buffer, 1);
+!     lua_pushinteger(L, b->b_ml.ml_line_count);
+      return 1;
+  }
+  
+      static int
+  luaV_buffer_call(lua_State *L)
+  {
+!     buf_T *b = (buf_T *) luaV_checkvalid(L, luaV_Buffer, 1);
+      lua_settop(L, 1);
+!     set_curbuf(b, DOBUF_SPLIT);
+      return 1;
+  }
+  
+      static int
+  luaV_buffer_index(lua_State *L)
+  {
+!     buf_T *b = (buf_T *) luaV_checkvalid(L, luaV_Buffer, 1);
+      linenr_T n = (linenr_T) lua_tointeger(L, 2);
+!     if (n > 0 && n <= b->b_ml.ml_line_count)
+! 	luaV_pushline(L, b, n);
+      else if (lua_isstring(L, 2))
+      {
+  	const char *s = lua_tostring(L, 2);
+  	if (strncmp(s, "name", 4) == 0)
+! 	    lua_pushstring(L, (char *) b->b_sfname);
+  	else if (strncmp(s, "fname", 5) == 0)
+! 	    lua_pushstring(L, (char *) b->b_ffname);
+  	else if (strncmp(s, "number", 6) == 0)
+! 	    lua_pushinteger(L, b->b_fnum);
+  	/* methods */
+  	else if (strncmp(s,   "insert", 6) == 0
+  		|| strncmp(s, "next", 4) == 0
+***************
+*** 584,600 ****
+      static int
+  luaV_buffer_newindex(lua_State *L)
+  {
+!     luaV_Buffer *b = (luaV_Buffer *) lua_touserdata(L, 1);
+      linenr_T n = (linenr_T) luaL_checkinteger(L, 2);
+  #ifdef HAVE_SANDBOX
+      luaV_checksandbox(L);
+  #endif
+!     if (n < 1 || n > (*b)->b_ml.ml_line_count)
+  	luaL_error(L, "invalid line number");
+      if (lua_isnil(L, 3)) /* delete line */
+      {
+  	buf_T *buf = curbuf;
+! 	curbuf = *b;
+  	if (u_savedel(n, 1L) == FAIL)
+  	{
+  	    curbuf = buf;
+--- 1122,1138 ----
+      static int
+  luaV_buffer_newindex(lua_State *L)
+  {
+!     buf_T *b = (buf_T *) luaV_checkvalid(L, luaV_Buffer, 1);
+      linenr_T n = (linenr_T) luaL_checkinteger(L, 2);
+  #ifdef HAVE_SANDBOX
+      luaV_checksandbox(L);
+  #endif
+!     if (n < 1 || n > b->b_ml.ml_line_count)
+  	luaL_error(L, "invalid line number");
+      if (lua_isnil(L, 3)) /* delete line */
+      {
+  	buf_T *buf = curbuf;
+! 	curbuf = b;
+  	if (u_savedel(n, 1L) == FAIL)
+  	{
+  	    curbuf = buf;
+***************
+*** 607,613 ****
+  	}
+  	else {
+  	    deleted_lines_mark(n, 1L);
+! 	    if (*b == curwin->w_buffer) /* fix cursor in current window? */
+  	    {
+  		if (curwin->w_cursor.lnum >= n)
+  		{
+--- 1145,1151 ----
+  	}
+  	else {
+  	    deleted_lines_mark(n, 1L);
+! 	    if (b == curwin->w_buffer) /* fix cursor in current window? */
+  	    {
+  		if (curwin->w_cursor.lnum >= n)
+  		{
+***************
+*** 627,633 ****
+      else if (lua_isstring(L, 3)) /* update line */
+      {
+  	buf_T *buf = curbuf;
+! 	curbuf = *b;
+  	if (u_savesub(n) == FAIL)
+  	{
+  	    curbuf = buf;
+--- 1165,1171 ----
+      else if (lua_isstring(L, 3)) /* update line */
+      {
+  	buf_T *buf = curbuf;
+! 	curbuf = b;
+  	if (u_savesub(n) == FAIL)
+  	{
+  	    curbuf = buf;
+***************
+*** 640,646 ****
+  	}
+  	else changed_bytes(n, 0);
+  	curbuf = buf;
+! 	if (*b == curwin->w_buffer)
+  	    check_cursor_col();
+      }
+      else
+--- 1178,1184 ----
+  	}
+  	else changed_bytes(n, 0);
+  	curbuf = buf;
+! 	if (b == curwin->w_buffer)
+  	    check_cursor_col();
+      }
+      else
+***************
+*** 651,658 ****
+      static int
+  luaV_buffer_insert(lua_State *L)
+  {
+!     luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     linenr_T last = (*b)->b_ml.ml_line_count;
+      linenr_T n = (linenr_T) luaL_optinteger(L, 3, last);
+      buf_T *buf;
+      luaL_checktype(L, 2, LUA_TSTRING);
+--- 1189,1197 ----
+      static int
+  luaV_buffer_insert(lua_State *L)
+  {
+!     luaV_Buffer *lb = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     buf_T *b = (buf_T *) luaV_checkcache(L, (void *) *lb);
+!     linenr_T last = b->b_ml.ml_line_count;
+      linenr_T n = (linenr_T) luaL_optinteger(L, 3, last);
+      buf_T *buf;
+      luaL_checktype(L, 2, LUA_TSTRING);
+***************
+*** 664,670 ****
+      if (n > last) n = last;
+      /* insert */
+      buf = curbuf;
+!     curbuf = *b;
+      if (u_save(n, n + 1) == FAIL)
+      {
+  	curbuf = buf;
+--- 1203,1209 ----
+      if (n > last) n = last;
+      /* insert */
+      buf = curbuf;
+!     curbuf = b;
+      if (u_save(n, n + 1) == FAIL)
+      {
+  	curbuf = buf;
+***************
+*** 686,692 ****
+  luaV_buffer_next(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     luaV_pushbuffer(L, (*b)->b_next);
+      return 1;
+  }
+  
+--- 1225,1232 ----
+  luaV_buffer_next(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     buf_T *buf = (buf_T *) luaV_checkcache(L, (void *) *b);
+!     luaV_pushbuffer(L, buf->b_next);
+      return 1;
+  }
+  
+***************
+*** 694,700 ****
+  luaV_buffer_previous(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     luaV_pushbuffer(L, (*b)->b_prev);
+      return 1;
+  }
+  
+--- 1234,1241 ----
+  luaV_buffer_previous(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     buf_T *buf = (buf_T *) luaV_checkcache(L, (void *) *b);
+!     luaV_pushbuffer(L, buf->b_prev);
+      return 1;
+  }
+  
+***************
+*** 702,709 ****
+  luaV_buffer_isvalid(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     lua_pushlightuserdata(L, (void *) (*b));
+!     lua_rawget(L, LUA_ENVIRONINDEX);
+      lua_pushboolean(L, !lua_isnil(L, -1));
+      return 1;
+  }
+--- 1243,1249 ----
+  luaV_buffer_isvalid(lua_State *L)
+  {
+      luaV_Buffer *b = luaV_checkudata(L, 1, LUAVIM_BUFFER);
+!     luaV_getudata(L, *b);
+      lua_pushboolean(L, !lua_isnil(L, -1));
+      return 1;
+  }
+***************
+*** 724,801 ****
+  
+  /* =======   Window type   ======= */
+  
+!     static luaV_Window *
+! luaV_newwindow(lua_State *L, win_T *win)
+! {
+!     luaV_Window *w = (luaV_Window *) lua_newuserdata(L, sizeof(luaV_Window));
+!     *w = win;
+!     lua_pushlightuserdata(L, (void *) win);
+!     lua_pushvalue(L, -2);
+!     lua_rawset(L, LUA_ENVIRONINDEX); /* env[win] = udata */
+!     /* to avoid GC, store as key in env */
+!     lua_pushvalue(L, -1);
+!     lua_pushboolean(L, 1);
+!     lua_rawset(L, LUA_ENVIRONINDEX); /* env[udata] = true */
+!     /* set metatable */
+!     luaV_getfield(L, LUAVIM_WINDOW);
+!     lua_setmetatable(L, -2);
+!     return w;
+! }
+! 
+!     static luaV_Window *
+! luaV_pushwindow(lua_State *L, win_T *win)
+! {
+!     luaV_Window *w = NULL;
+!     if (win == NULL)
+! 	lua_pushnil(L);
+!     else {
+! 	lua_pushlightuserdata(L, (void *) win);
+! 	lua_rawget(L, LUA_ENVIRONINDEX);
+! 	if (lua_isnil(L, -1)) /* not interned? */
+! 	{
+! 	    lua_pop(L, 1);
+! 	    w = luaV_newwindow(L, win);
+! 	}
+! 	else w = (luaV_Window *) lua_touserdata(L, -1);
+!     }
+!     return w;
+! }
+! 
+! /* Window metamethods */
+! 
+!     static int
+! luaV_window_tostring(lua_State *L)
+! {
+!     lua_pushfstring(L, "%s: %p", LUAVIM_WINDOW, lua_touserdata(L, 1));
+!     return 1;
+! }
+  
+      static int
+  luaV_window_call(lua_State *L)
+  {
+!     luaV_Window *w = (luaV_Window *) lua_touserdata(L, 1);
+      lua_settop(L, 1);
+!     win_goto(*w);
+      return 1;
+  }
+  
+      static int
+  luaV_window_index(lua_State *L)
+  {
+!     luaV_Window *w = (luaV_Window *) lua_touserdata(L, 1);
+      const char *s = luaL_checkstring(L, 2);
+      if (strncmp(s, "buffer", 6) == 0)
+! 	luaV_pushbuffer(L, (*w)->w_buffer);
+      else if (strncmp(s, "line", 4) == 0)
+! 	lua_pushinteger(L, (*w)->w_cursor.lnum);
+      else if (strncmp(s, "col", 3) == 0)
+! 	lua_pushinteger(L, (*w)->w_cursor.col + 1);
+  #ifdef FEAT_VERTSPLIT
+      else if (strncmp(s, "width", 5) == 0)
+! 	lua_pushinteger(L, W_WIDTH((*w)));
+  #endif
+      else if (strncmp(s, "height", 6) == 0)
+! 	lua_pushinteger(L, (*w)->w_height);
+      /* methods */
+      else if (strncmp(s,   "next", 4) == 0
+  	    || strncmp(s, "previous", 8) == 0
+--- 1264,1299 ----
+  
+  /* =======   Window type   ======= */
+  
+! luaV_newtype(win_T, window, luaV_Window, LUAVIM_WINDOW)
+! luaV_pushtype(win_T, window, luaV_Window)
+! luaV_type_tostring(window, LUAVIM_WINDOW)
+  
+      static int
+  luaV_window_call(lua_State *L)
+  {
+!     win_T *w = (win_T *) luaV_checkvalid(L, luaV_Window, 1);
+      lua_settop(L, 1);
+!     win_goto(w);
+      return 1;
+  }
+  
+      static int
+  luaV_window_index(lua_State *L)
+  {
+!     win_T *w = (win_T *) luaV_checkvalid(L, luaV_Window, 1);
+      const char *s = luaL_checkstring(L, 2);
+      if (strncmp(s, "buffer", 6) == 0)
+! 	luaV_pushbuffer(L, w->w_buffer);
+      else if (strncmp(s, "line", 4) == 0)
+! 	lua_pushinteger(L, w->w_cursor.lnum);
+      else if (strncmp(s, "col", 3) == 0)
+! 	lua_pushinteger(L, w->w_cursor.col + 1);
+  #ifdef FEAT_VERTSPLIT
+      else if (strncmp(s, "width", 5) == 0)
+! 	lua_pushinteger(L, W_WIDTH(w));
+  #endif
+      else if (strncmp(s, "height", 6) == 0)
+! 	lua_pushinteger(L, w->w_height);
+      /* methods */
+      else if (strncmp(s,   "next", 4) == 0
+  	    || strncmp(s, "previous", 8) == 0
+***************
+*** 812,818 ****
+      static int
+  luaV_window_newindex (lua_State *L)
+  {
+!     luaV_Window *w = (luaV_Window *) lua_touserdata(L, 1);
+      const char *s = luaL_checkstring(L, 2);
+      int v = luaL_checkinteger(L, 3);
+      if (strncmp(s, "line", 4) == 0)
+--- 1310,1316 ----
+      static int
+  luaV_window_newindex (lua_State *L)
+  {
+!     win_T *w = (win_T *) luaV_checkvalid(L, luaV_Window, 1);
+      const char *s = luaL_checkstring(L, 2);
+      int v = luaL_checkinteger(L, 3);
+      if (strncmp(s, "line", 4) == 0)
+***************
+*** 820,828 ****
+  #ifdef HAVE_SANDBOX
+  	luaV_checksandbox(L);
+  #endif
+! 	if (v < 1 || v > (*w)->w_buffer->b_ml.ml_line_count)
+  	    luaL_error(L, "line out of range");
+! 	(*w)->w_cursor.lnum = v;
+  	update_screen(VALID);
+      }
+      else if (strncmp(s, "col", 3) == 0)
+--- 1318,1326 ----
+  #ifdef HAVE_SANDBOX
+  	luaV_checksandbox(L);
+  #endif
+! 	if (v < 1 || v > w->w_buffer->b_ml.ml_line_count)
+  	    luaL_error(L, "line out of range");
+! 	w->w_cursor.lnum = v;
+  	update_screen(VALID);
+      }
+      else if (strncmp(s, "col", 3) == 0)
+***************
+*** 830,836 ****
+  #ifdef HAVE_SANDBOX
+  	luaV_checksandbox(L);
+  #endif
+! 	(*w)->w_cursor.col = v - 1;
+  	update_screen(VALID);
+      }
+  #ifdef FEAT_VERTSPLIT
+--- 1328,1334 ----
+  #ifdef HAVE_SANDBOX
+  	luaV_checksandbox(L);
+  #endif
+! 	w->w_cursor.col = v - 1;
+  	update_screen(VALID);
+      }
+  #ifdef FEAT_VERTSPLIT
+***************
+*** 840,846 ****
+  #ifdef FEAT_GUI
+  	need_mouse_correct = TRUE;
+  #endif
+! 	curwin = *w;
+  	win_setwidth(v);
+  	curwin = win;
+      }
+--- 1338,1344 ----
+  #ifdef FEAT_GUI
+  	need_mouse_correct = TRUE;
+  #endif
+! 	curwin = w;
+  	win_setwidth(v);
+  	curwin = win;
+      }
+***************
+*** 851,857 ****
+  #ifdef FEAT_GUI
+  	need_mouse_correct = TRUE;
+  #endif
+! 	curwin = *w;
+  	win_setheight(v);
+  	curwin = win;
+      }
+--- 1349,1355 ----
+  #ifdef FEAT_GUI
+  	need_mouse_correct = TRUE;
+  #endif
+! 	curwin = w;
+  	win_setheight(v);
+  	curwin = win;
+      }
+***************
+*** 864,870 ****
+  luaV_window_next(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     luaV_pushwindow(L, (*w)->w_next);
+      return 1;
+  }
+  
+--- 1362,1369 ----
+  luaV_window_next(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     win_T *win = (win_T *) luaV_checkcache(L, (void *) *w);
+!     luaV_pushwindow(L, win->w_next);
+      return 1;
+  }
+  
+***************
+*** 872,878 ****
+  luaV_window_previous(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     luaV_pushwindow(L, (*w)->w_prev);
+      return 1;
+  }
+  
+--- 1371,1378 ----
+  luaV_window_previous(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     win_T *win = (win_T *) luaV_checkcache(L, (void *) *w);
+!     luaV_pushwindow(L, win->w_prev);
+      return 1;
+  }
+  
+***************
+*** 880,887 ****
+  luaV_window_isvalid(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     lua_pushlightuserdata(L, (void *) (*w));
+!     lua_rawget(L, LUA_ENVIRONINDEX);
+      lua_pushboolean(L, !lua_isnil(L, -1));
+      return 1;
+  }
+--- 1380,1386 ----
+  luaV_window_isvalid(lua_State *L)
+  {
+      luaV_Window *w = luaV_checkudata(L, 1, LUAVIM_WINDOW);
+!     luaV_getudata(L, *w);
+      lua_pushboolean(L, !lua_isnil(L, -1));
+      return 1;
+  }
+***************
+*** 983,988 ****
+--- 1482,1509 ----
+  }
+  
+      static int
++ luaV_list(lua_State *L)
++ {
++     list_T *l = list_alloc();
++     if (l == NULL)
++ 	lua_pushnil(L);
++     else
++ 	luaV_newlist(L, l);
++     return 1;
++ }
++ 
++     static int
++ luaV_dict(lua_State *L)
++ {
++     dict_T *d = dict_alloc();
++     if (d == NULL)
++ 	lua_pushnil(L);
++     else
++ 	luaV_newdict(L, d);
++     return 1;
++ }
++ 
++     static int
+  luaV_buffer(lua_State *L)
+  {
+      buf_T *buf;
+***************
+*** 1008,1022 ****
+  		    break;
+  	    }
+  	}
+- 	if (buf == NULL) /* not found? */
+- 	    lua_pushnil(L);
+- 	else
+- 	    luaV_pushbuffer(L, buf);
+      }
+!     else {
+  	buf = (lua_toboolean(L, 1)) ? firstbuf : curbuf; /* first buffer? */
+! 	luaV_pushbuffer(L, buf);
+!     }
+      return 1;
+  }
+  
+--- 1529,1538 ----
+  		    break;
+  	    }
+  	}
+      }
+!     else
+  	buf = (lua_toboolean(L, 1)) ? firstbuf : curbuf; /* first buffer? */
+!     luaV_pushbuffer(L, buf);
+      return 1;
+  }
+  
+***************
+*** 1029,1043 ****
+  	int n = lua_tointeger(L, 1);
+  	for (win = firstwin; win != NULL; win = win->w_next, n--)
+  	    if (n == 1) break;
+- 	if (win == NULL) /* not found? */
+- 	    lua_pushnil(L);
+- 	else
+- 	    luaV_pushwindow(L, win);
+      }
+!     else {
+  	win = (lua_toboolean(L, 1)) ? firstwin : curwin; /* first window? */
+! 	luaV_pushwindow(L, win);
+!     }
+      return 1;
+  }
+  
+--- 1545,1554 ----
+  	int n = lua_tointeger(L, 1);
+  	for (win = firstwin; win != NULL; win = win->w_next, n--)
+  	    if (n == 1) break;
+      }
+!     else
+  	win = (lua_toboolean(L, 1)) ? firstwin : curwin; /* first window? */
+!     luaV_pushwindow(L, win);
+      return 1;
+  }
+  
+***************
+*** 1054,1086 ****
+  }
+  
+      static int
+! luaV_isbuffer(lua_State *L)
+! {
+!     lua_pushboolean(L, luaV_toudata(L, 1, LUAVIM_BUFFER) != NULL);
+!     return 1;
+! }
+! 
+!     static int
+! luaV_iswindow(lua_State *L)
+  {
+!     lua_pushboolean(L, luaV_toudata(L, 1, LUAVIM_WINDOW) != NULL);
+!     return 1;
+! }
+! 
+! /* for freeing buffer and window objects; lightuserdata as arg */
+!     static int
+! luaV_free(lua_State *L)
+! {
+!     lua_pushvalue(L, 1); /* lightudata */
+!     lua_rawget(L, LUA_ENVIRONINDEX);
+!     if (!lua_isnil(L, -1))
+      {
+! 	lua_pushnil(L);
+! 	lua_rawset(L, LUA_ENVIRONINDEX); /* env[udata] = nil */
+! 	lua_pushnil(L);
+! 	lua_rawset(L, LUA_ENVIRONINDEX); /* env[lightudata] = nil */
+      }
+!     return 0;
+  }
+  
+  static const luaL_Reg luaV_module[] = {
+--- 1565,1606 ----
+  }
+  
+      static int
+! luaV_type(lua_State *L)
+  {
+!     luaL_checkany(L, 1);
+!     if (lua_type(L, 1) == LUA_TUSERDATA) /* check vim udata? */
+      {
+! 	lua_settop(L, 1);
+! 	if (lua_getmetatable(L, 1))
+! 	{
+! 	    luaV_getfield(L, LUAVIM_LIST);
+! 	    if (lua_rawequal(L, -1, 2))
+! 	    {
+! 		lua_pushstring(L, "list");
+! 		return 1;
+! 	    }
+! 	    luaV_getfield(L, LUAVIM_DICT);
+! 	    if (lua_rawequal(L, -1, 2))
+! 	    {
+! 		lua_pushstring(L, "dict");
+! 		return 1;
+! 	    }
+! 	    luaV_getfield(L, LUAVIM_BUFFER);
+! 	    if (lua_rawequal(L, -1, 2))
+! 	    {
+! 		lua_pushstring(L, "buffer");
+! 		return 1;
+! 	    }
+! 	    luaV_getfield(L, LUAVIM_WINDOW);
+! 	    if (lua_rawequal(L, -1, 2))
+! 	    {
+! 		lua_pushstring(L, "window");
+! 		return 1;
+! 	    }
+! 	}
+      }
+!     lua_pushstring(L, luaL_typename(L, 1)); /* fallback */
+!     return 1;
+  }
+  
+  static const luaL_Reg luaV_module[] = {
+***************
+*** 1088,1111 ****
+      {"eval", luaV_eval},
+      {"beep", luaV_beep},
+      {"line", luaV_line},
+      {"buffer", luaV_buffer},
+      {"window", luaV_window},
+      {"open", luaV_open},
+!     {"isbuffer", luaV_isbuffer},
+!     {"iswindow", luaV_iswindow},
+      {NULL, NULL}
+  };
+  
+      static int
+  luaopen_vim(lua_State *L)
+  {
+!     /* set environment */
+      lua_newtable(L);
+      lua_newtable(L);
+!     lua_pushliteral(L, "v");
+      lua_setfield(L, -2, "__mode");
+!     lua_setmetatable(L, -2);
+!     lua_replace(L, LUA_ENVIRONINDEX);
+      /* print */
+      lua_pushcfunction(L, luaV_print);
+      lua_setglobal(L, "print");
+--- 1608,1695 ----
+      {"eval", luaV_eval},
+      {"beep", luaV_beep},
+      {"line", luaV_line},
++     {"list", luaV_list},
++     {"dict", luaV_dict},
+      {"buffer", luaV_buffer},
+      {"window", luaV_window},
+      {"open", luaV_open},
+!     {"type", luaV_type},
+      {NULL, NULL}
+  };
+  
++ /* for freeing list, dict, buffer and window objects; lightuserdata as arg */
++     static int
++ luaV_free(lua_State *L)
++ {
++     lua_pushnil(L);
++     luaV_setudata(L, lua_touserdata(L, 1));
++     return 0;
++ }
++ 
++     static int
++ luaV_luaeval (lua_State *L)
++ {
++     luaL_Buffer b;
++     size_t l;
++     const char *str = lua_tolstring(L, 1, &l);
++     typval_T *arg = (typval_T *) lua_touserdata(L, 2);
++     typval_T *rettv = (typval_T *) lua_touserdata(L, 3);
++     luaL_buffinit(L, &b);
++     luaL_addlstring(&b, LUAVIM_EVALHEADER, sizeof(LUAVIM_EVALHEADER) - 1);
++     luaL_addlstring(&b, str, l);
++     luaL_pushresult(&b);
++     str = lua_tolstring(L, -1, &l);
++     if (luaL_loadbuffer(L, str, l, LUAVIM_EVALNAME)) /* compile error? */
++     {
++ 	luaV_emsg(L);
++ 	return 0;
++     }
++     luaV_pushtypval(L, arg);
++     if (lua_pcall(L, 1, 1, 0)) /* running error? */
++     {
++ 	luaV_emsg(L);
++ 	return 0;
++     }
++     luaV_totypval(L, -1, rettv);
++     return 0;
++ }
++ 
++     static int
++ luaV_setref (lua_State *L)
++ {
++     int copyID = lua_tointeger(L, 1);
++     typval_T tv;
++     luaV_getfield(L, LUAVIM_LIST);
++     luaV_getfield(L, LUAVIM_DICT);
++     lua_pushnil(L);
++     while (lua_next(L, lua_upvalueindex(1)) != 0) /* traverse cache table */
++     {
++ 	lua_getmetatable(L, -1);
++ 	if (lua_rawequal(L, -1, 2)) /* list? */
++ 	{
++ 	    tv.v_type = VAR_LIST;
++ 	    tv.vval.v_list = (list_T *) lua_touserdata(L, 4); /* key */
++ 	}
++ 	else if (lua_rawequal(L, -1, 3)) /* dict? */
++ 	{
++ 	    tv.v_type = VAR_DICT;
++ 	    tv.vval.v_dict = (dict_T *) lua_touserdata(L, 4); /* key */
++ 	}
++ 	lua_pop(L, 2); /* metatable and value */
++ 	set_ref_in_tv(&tv, copyID);
++     }
++     return 0;
++ }
++ 
+      static int
+  luaopen_vim(lua_State *L)
+  {
+!     /* set cache table */
+      lua_newtable(L);
+      lua_newtable(L);
+!     lua_pushstring(L, "v");
+      lua_setfield(L, -2, "__mode");
+!     lua_setmetatable(L, -2); /* cache is weak-valued */
+      /* print */
+      lua_pushcfunction(L, luaV_print);
+      lua_setglobal(L, "print");
+***************
+*** 1116,1129 ****
+      lua_pop(L, 1);
+      /* free */
+      lua_pushlightuserdata(L, (void *) LUAVIM_FREE);
+!     lua_pushcfunction(L, luaV_free);
+      lua_rawset(L, LUA_REGISTRYINDEX);
+      /* register */
+      luaV_newmetatable(L, LUAVIM_BUFFER);
+!     luaL_register(L, NULL, luaV_Buffer_mt);
+      luaV_newmetatable(L, LUAVIM_WINDOW);
+!     luaL_register(L, NULL, luaV_Window_mt);
+!     luaL_register(L, LUAVIM_NAME, luaV_module);
+      return 0;
+  }
+  
+--- 1700,1735 ----
+      lua_pop(L, 1);
+      /* free */
+      lua_pushlightuserdata(L, (void *) LUAVIM_FREE);
+!     lua_pushvalue(L, 1); /* cache table */
+!     lua_pushcclosure(L, luaV_free, 1);
+!     lua_rawset(L, LUA_REGISTRYINDEX);
+!     /* luaeval */
+!     lua_pushlightuserdata(L, (void *) LUAVIM_LUAEVAL);
+!     lua_pushvalue(L, 1); /* cache table */
+!     lua_pushcclosure(L, luaV_luaeval, 1);
+!     lua_rawset(L, LUA_REGISTRYINDEX);
+!     /* setref */
+!     lua_pushlightuserdata(L, (void *) LUAVIM_SETREF);
+!     lua_pushvalue(L, 1); /* cache table */
+!     lua_pushcclosure(L, luaV_setref, 1);
+      lua_rawset(L, LUA_REGISTRYINDEX);
+      /* register */
++     luaV_newmetatable(L, LUAVIM_LIST);
++     lua_pushvalue(L, 1);
++     luaV_openlib(L, luaV_List_mt, 1);
++     luaV_newmetatable(L, LUAVIM_DICT);
++     lua_pushvalue(L, 1);
++     luaV_openlib(L, luaV_Dict_mt, 1);
+      luaV_newmetatable(L, LUAVIM_BUFFER);
+!     lua_pushvalue(L, 1); /* cache table */
+!     luaV_openlib(L, luaV_Buffer_mt, 1);
+      luaV_newmetatable(L, LUAVIM_WINDOW);
+!     lua_pushvalue(L, 1); /* cache table */
+!     luaV_openlib(L, luaV_Window_mt, 1);
+!     lua_newtable(L); /* vim table */
+!     lua_pushvalue(L, 1); /* cache table */
+!     luaV_openlib(L, luaV_module, 1);
+!     lua_setglobal(L, LUAVIM_NAME);
+      return 0;
+  }
+  
+***************
+*** 1154,1160 ****
+  static lua_State *L = NULL;
+  
+      static int
+! lua_is_open(void)
+  {
+      return L != NULL;
+  }
+--- 1760,1766 ----
+  static lua_State *L = NULL;
+  
+      static int
+! lua_isopen(void)
+  {
+      return L != NULL;
+  }
+***************
+*** 1162,1168 ****
+      static int
+  lua_init(void)
+  {
+!     if (L == NULL)
+      {
+  #ifdef DYNAMIC_LUA
+  	if (!lua_enabled(TRUE))
+--- 1768,1774 ----
+      static int
+  lua_init(void)
+  {
+!     if (!lua_isopen())
+      {
+  #ifdef DYNAMIC_LUA
+  	if (!lua_enabled(TRUE))
+***************
+*** 1179,1185 ****
+      void
+  lua_end(void)
+  {
+!     if (L != NULL)
+      {
+  	lua_close(L);
+  	L = NULL;
+--- 1785,1791 ----
+      void
+  lua_end(void)
+  {
+!     if (lua_isopen())
+      {
+  	lua_close(L);
+  	L = NULL;
+***************
+*** 1273,1295 ****
+      }
+  }
+  
+! /* buffer */
+      void
+! lua_buffer_free(buf_T *buf)
+  {
+!     if (!lua_is_open()) return;
+!     luaV_getfield(L, LUAVIM_FREE);
+!     lua_pushlightuserdata(L, (void *) buf);
+!     lua_call(L, 1, 0);
+  }
+  
+- /* window */
+      void
+! lua_window_free(win_T *win)
+  {
+!     if (!lua_is_open()) return;
+!     luaV_getfield(L, LUAVIM_FREE);
+!     lua_pushlightuserdata(L, (void *) win);
+      lua_call(L, 1, 0);
+  }
+  
+--- 1879,1914 ----
+      }
+  }
+  
+! #define luaV_freetype(typ,tname) \
+! 	void \
+!     lua_##tname##_free(typ *o) \
+!     { \
+! 	if (!lua_isopen()) return; \
+! 	luaV_getfield(L, LUAVIM_FREE); \
+! 	lua_pushlightuserdata(L, (void *) o); \
+! 	lua_call(L, 1, 0); \
+!     }
+! 
+! luaV_freetype(buf_T, buffer)
+! luaV_freetype(win_T, window)
+! 
+      void
+! do_luaeval (char_u *str, typval_T *arg, typval_T *rettv)
+  {
+!     lua_init();
+!     luaV_getfield(L, LUAVIM_LUAEVAL);
+!     lua_pushstring(L, (char *) str);
+!     lua_pushlightuserdata(L, (void *) arg);
+!     lua_pushlightuserdata(L, (void *) rettv);
+!     lua_call(L, 3, 0);
+  }
+  
+      void
+! set_ref_in_lua (int copyID)
+  {
+!     if (!lua_isopen()) return;
+!     luaV_getfield(L, LUAVIM_SETREF);
+!     lua_pushinteger(L, copyID);
+      lua_call(L, 1, 0);
+  }
+  
+*** ../vim-7.3.489/src/proto/if_lua.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/if_lua.pro	2012-04-05 16:41:35.000000000 +0200
+***************
+*** 6,9 ****
+--- 6,11 ----
+  void ex_luafile __ARGS((exarg_T *eap));
+  void lua_buffer_free __ARGS((buf_T *buf));
+  void lua_window_free __ARGS((win_T *win));
++ void do_luaeval __ARGS((char_u *str, typval_T *arg, typval_T *rettv));
++ void set_ref_in_lua __ARGS((int copyID));
+  /* vim: set ft=c : */
+*** ../vim-7.3.489/src/version.c	2012-04-05 16:07:01.000000000 +0200
+--- src/version.c	2012-04-05 16:52:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     490,
+  /**/
+
+-- 
+Even got a Datapoint 3600(?) with a DD50 connector instead of the
+usual DB25...  what a nightmare trying to figure out the pinout
+for *that* with no spex...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.491 b/source/ap/vim/patches/7.3.491
new file mode 100644
index 00000000..b675722e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.491
@@ -0,0 +1,235 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.491
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.491
+Problem:    No tests for Lua.
+Solution:   Add some simple tests for Lua. (Luis Carvalho)
+Files:      src/testdir/test1.in, src/testdir/test85.in, src/testdir/test85.ok
+            src/testdir/Make_amiga.mak, src/testdir/Make_dos.mak,
+            src/testdir/Make_ming.mak, src/testdir/Make_os2.mak,
+            src/testdir/Make_vms.mms, src/testdir/Makefile
+
+
+*** ../vim-7.3.490/src/testdir/test1.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test1.in	2012-04-05 16:37:37.000000000 +0200
+***************
+*** 15,20 ****
+--- 15,21 ----
+  be set like small.vim above.  mbyte.vim is sourced by tests that require the
+  +multi_byte feature.
+  Similar logic is applied to the +mzscheme feature, using mzscheme.vim.
++ Similar logic is applied to the +lua feature, using lua.vim.
+  
+  STARTTEST
+  :" Write a single line to test.out to check if testing works at all.
+***************
+*** 28,37 ****
+--- 29,45 ----
+  qa!
+  :w! mbyte.vim
+  :w! mzscheme.vim
++ :w! lua.vim
++ :"
+  :" If +multi_byte feature supported, make mbyte.vim empty.
+  :if has("multi_byte") | sp another | w! mbyte.vim | q | endif
++ :"
+  :" If +mzscheme feature supported, make mzscheme.vim empty.
+  :if has("mzscheme") | sp another | w! mzscheme.vim | q | endif
++ :"
++ :" If +lua feature supported, make lua.vim empty.
++ :if has("lua") | sp another | w! lua.vim | q | endif
++ :"
+  :" If +eval feature supported quit here, leaving tiny.vim and small.vim empty.
+  :" Otherwise write small.vim to skip the test.
+  :if 1 | q! | endif
+*** ../vim-7.3.490/src/testdir/test85.in	2012-04-05 16:56:12.000000000 +0200
+--- src/testdir/test85.in	2012-04-05 16:44:00.000000000 +0200
+***************
+*** 0 ****
+--- 1,42 ----
++ Test for Lua interface and luaeval() function
++ 
++ STARTTEST
++ :so small.vim
++ :so lua.vim
++ :set nocompatible viminfo+=nviminfo
++ :lua l = vim.list():add"item0":add"dictionary with list OK":add"item2"
++ :lua h = vim.dict(); h.list = l
++ :call garbagecollect()
++ /^1
++ :" change buffer contents
++ :lua curbuf = vim.buffer()
++ :lua curline = vim.eval"line('.')"
++ :lua curbuf[curline] = "1 changed line 1"
++ :" scalar test
++ :let tmp_string = luaeval('"string"')
++ :let tmp_1000 = luaeval('1000')
++ :if printf("%s%.0f", tmp_string, tmp_1000) == "string1000"
++ :let scalar_res = "OK"
++ :else
++ :let scalar_res = "FAILED"
++ :endif
++ :call append(search("^1"), "scalar test " . scalar_res)
++ :" dictionary containing a list
++ :let tmp = luaeval("h").list[1]
++ :/^2/put =tmp
++ :" circular list (at the same time test lists containing lists)
++ :lua l[2] = l
++ :let l2 = luaeval("h").list
++ :if l2[2] == l2
++ :let res = "OK"
++ :else
++ :let res = "FAILED"
++ :endif
++ :call setline(search("^3"), "circular test " . res)
++ :?^1?,$w! test.out
++ :qa!
++ ENDTEST
++ 
++ 1 line 1
++ 2 line 2
++ 3 line 3
+*** ../vim-7.3.490/src/testdir/test85.ok	2012-04-05 16:56:12.000000000 +0200
+--- src/testdir/test85.ok	2012-04-05 16:18:56.000000000 +0200
+***************
+*** 0 ****
+--- 1,5 ----
++ 1 changed line 1
++ scalar test OK
++ 2 line 2
++ dictionary with list OK
++ circular test OK
+*** ../vim-7.3.490/src/testdir/Make_amiga.mak	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Make_amiga.mak	2012-04-05 16:21:55.000000000 +0200
+***************
+*** 13,18 ****
+--- 13,19 ----
+  # test25	uses symbolic link
+  # test27	can't edit file with "*"
+  # test52	only for Win32
++ # test85	no Lua interface
+  
+  SCRIPTS = test1.out test3.out test4.out test5.out test6.out \
+  		test7.out test8.out test9.out \
+*** ../vim-7.3.490/src/testdir/Make_dos.mak	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Make_dos.mak	2012-04-05 16:22:16.000000000 +0200
+***************
+*** 30,36 ****
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 30,36 ----
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.490/src/testdir/Make_ming.mak	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Make_ming.mak	2012-04-05 16:22:25.000000000 +0200
+***************
+*** 50,56 ****
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 50,56 ----
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.490/src/testdir/Make_os2.mak	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Make_os2.mak	2012-04-05 16:22:38.000000000 +0200
+***************
+*** 13,18 ****
+--- 13,19 ----
+  # test25	uses symbolic link
+  # test27	can't edit file with "*" in file name
+  # test52	only for Win32
++ # test85	no Lua interface
+  
+  SCRIPTS = test1.out test3.out test4.out test5.out test6.out \
+  		test7.out test8.out test9.out \
+*** ../vim-7.3.490/src/testdir/Make_vms.mms	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Make_vms.mms	2012-04-05 16:23:08.000000000 +0200
+***************
+*** 4,10 ****
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2012 Mar 28
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+--- 4,10 ----
+  # Authors:	Zoltan Arpadffy, <arpadffy@polarhome.com>
+  #		Sandor Kopanyi,  <sandor.kopanyi@mailbox.hu>
+  #
+! # Last change:  2012 Apr 05
+  #
+  # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64.
+  # Edit the lines in the Configuration section below to select.
+***************
+*** 89,94 ****
+--- 89,95 ----
+  # with too many dots).
+  #
+  # Test 72: unknown reason
++ # Test 85: no Lua interface
+  
+  .IFDEF WANT_GUI
+  SCRIPT_GUI = test16.out
+*** ../vim-7.3.490/src/testdir/Makefile	2012-03-28 19:58:34.000000000 +0200
+--- src/testdir/Makefile	2012-04-05 16:21:13.000000000 +0200
+***************
+*** 27,33 ****
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 27,33 ----
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS_GUI = test16.out
+  
+*** ../vim-7.3.490/src/version.c	2012-04-05 16:53:56.000000000 +0200
+--- src/version.c	2012-04-05 16:55:27.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     491,
+  /**/
+
+-- 
+You had connectors?  Eeee, when I were a lad we 'ad to carry the
+bits between the computer and the terminal with a spoon...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.492 b/source/ap/vim/patches/7.3.492
new file mode 100644
index 00000000..b32b6f68
--- /dev/null
+++ b/source/ap/vim/patches/7.3.492
@@ -0,0 +1,718 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.492
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.492
+Problem:    Can't indent conditions separately from function arguments.
+Solution:   Add the 'k' flag in 'cino. (Lech Lorens)
+Files:	    runtime/doc/indent.txt, src/misc1.c, src/testdir/test3.in,
+	    src/testdir/test3.ok
+
+
+*** ../vim-7.3.491/runtime/doc/indent.txt	2011-06-26 03:16:58.000000000 +0200
+--- runtime/doc/indent.txt	2012-04-05 17:12:14.000000000 +0200
+***************
+*** 459,464 ****
+--- 460,481 ----
+  		  a_short_line(argument,    a_short_line(argument,
+  			       argument);		 argument);
+  <
++ 							*cino-k*
++ 	kN    When in unclosed parentheses which follow "if", "for" or
++ 	      "while" and N is non-zero, overrides the behaviour defined by
++ 	      "(N": causes the indent to be N characters relative to the outer
++ 	      context (i.e. the line where "if", "for" or "while" is).  Has
++ 	      no effect on deeper levels of nesting.  Affects flags like "wN"
++ 	      only for the "if", "for" and "while" conditions.  If 0, defaults
++ 	      to behaviour defined by the "(N" flag.  (default: 0).
++ 
++ 		cino=(0			   cino=(0,ks >
++ 		  if (condition1	    if (condition1
++ 		      && condition2)		    && condition2)
++ 		      action();			action();
++ 		  function(argument1	    function(argument1
++ 			   && argument2);	     && argument2);
++ <
+  							*cino-m*
+  	mN    When N is non-zero, line up a line starting with a closing
+  	      parentheses with the first character of the line with the
+***************
+*** 527,540 ****
+  
+  								*cino-#*
+  	#N    When N is non-zero recognize shell/Perl comments, starting with
+! 	      '#'.  Default N is zero: don't recognizes '#' comments.  Note
+  	      that lines starting with # will still be seen as preprocessor
+  	      lines.
+  
+  
+  The defaults, spelled out in full, are:
+  	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+! 			c3,C0,/0,(2s,us,U0,w0,W0,m0,j0,J0,)20,*70,#0
+  
+  Vim puts a line in column 1 if:
+  - It starts with '#' (preprocessor directives), if 'cinkeys' contains '#'.
+--- 546,559 ----
+  
+  								*cino-#*
+  	#N    When N is non-zero recognize shell/Perl comments, starting with
+! 	      '#'.  Default N is zero: don't recognize '#' comments.  Note
+  	      that lines starting with # will still be seen as preprocessor
+  	      lines.
+  
+  
+  The defaults, spelled out in full, are:
+  	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+! 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
+  
+  Vim puts a line in column 1 if:
+  - It starts with '#' (preprocessor directives), if 'cinkeys' contains '#'.
+*** ../vim-7.3.491/src/misc1.c	2012-02-29 13:49:03.000000000 +0100
+--- src/misc1.c	2012-04-05 17:12:14.000000000 +0200
+***************
+*** 5771,5776 ****
+--- 5771,5822 ----
+  }
+  
+  /*
++  * Check whether in "p" there is an "if", "for" or "while" before offset.
++  * Return 0 if there is none.
++  * Otherwise return !0 and update "*poffset" to point to the place where the
++  * string was found.
++  */
++     static int
++ cin_is_if_for_while_before_offset(line, offset, poffset)
++     char_u *line;
++     size_t offset;
++     int    *poffset;
++ {
++ 
++     if (offset-- < 2)
++ 	return 0;
++     while (offset > 2 && vim_iswhite(line[offset]))
++ 	--offset;
++ 
++     offset -= 1;
++     if (!STRNCMP(line + offset, "if", 2))
++ 	goto probablyFound;
++ 
++     if (offset >= 1)
++     {
++ 	offset -= 1;
++ 	if (!STRNCMP(line + offset, "for", 3))
++ 	    goto probablyFound;
++ 
++ 	if (offset >= 2)
++ 	{
++ 	    offset -= 2;
++ 	    if (!STRNCMP(line + offset, "while", 5))
++ 		goto probablyFound;
++ 	}
++     }
++ 
++     return 0;
++ probablyFound:
++     if (!offset || !vim_isIDc(line[offset - 1]))
++     {
++ 	*poffset = offset;
++ 	return 1;
++     }
++     return 0;
++ }
++ 
++ /*
+   * Return TRUE if we are at the end of a do-while.
+   *    do
+   *       nothing;
+***************
+*** 6124,6130 ****
+  
+  /*
+   * Find the matching '(', failing if it is in a comment.
+!  * Return NULL of no match found.
+   */
+      static pos_T *
+  find_match_paren(ind_maxparen, ind_maxcomment)	    /* XXX */
+--- 6170,6176 ----
+  
+  /*
+   * Find the matching '(', failing if it is in a comment.
+!  * Return NULL if no match found.
+   */
+      static pos_T *
+  find_match_paren(ind_maxparen, ind_maxcomment)	    /* XXX */
+***************
+*** 6393,6398 ****
+--- 6439,6450 ----
+       */
+      int ind_cpp_namespace = 0;
+  
++     /*
++      * handle continuation lines containing conditions of if(), for() and
++      * while()
++      */
++     int ind_if_for_while = 0;
++ 
+      pos_T	cur_curpos;
+      int		amount;
+      int		scope_amount;
+***************
+*** 6437,6442 ****
+--- 6489,6495 ----
+      int		cont_amount = 0;    /* amount for continuation line */
+      int		original_line_islabel;
+      int		added_to_amount = 0;
++     int		is_if_for_while = 0;
+  
+      for (options = curbuf->b_p_cino; *options; )
+      {
+***************
+*** 6509,6514 ****
+--- 6562,6568 ----
+  	    case 'l': ind_keep_case_label = n; break;
+  	    case '#': ind_hash_comment = n; break;
+  	    case 'N': ind_cpp_namespace = n; break;
++ 	    case 'k': ind_if_for_while = n; break;
+  	}
+  	if (*options == ',')
+  	    ++options;
+***************
+*** 6812,6817 ****
+--- 6866,6900 ----
+  	if (amount == -1)
+  	{
+  	    int	    ignore_paren_col = 0;
++ 	    int	    is_if_for_while = 0;
++ 
++ 	    if (ind_if_for_while)
++ 	    {
++ 		/* Look for the outermost opening parenthesis on this line
++ 		 * and check whether it belongs to an "if", "for" or "while". */
++ 
++ 		pos_T	    cursor_save = curwin->w_cursor;
++ 		pos_T	    outermost;
++ 		char_u	    *line;
++ 		int	    look_col;
++ 
++ 		trypos = &our_paren_pos;
++ 		do {
++ 		    outermost = *trypos;
++ 		    curwin->w_cursor.lnum = outermost.lnum;
++ 		    curwin->w_cursor.col = outermost.col;
++ 
++ 		    trypos = find_match_paren(ind_maxparen, ind_maxcomment);
++ 		} while (trypos && trypos->lnum == outermost.lnum);
++ 
++ 		curwin->w_cursor = cursor_save;
++ 
++ 		line = ml_get(outermost.lnum);
++ 
++ 		is_if_for_while =
++ 		    cin_is_if_for_while_before_offset(line, outermost.col,
++ 						      &outermost.col);
++ 	    }
+  
+  	    amount = skip_label(our_paren_pos.lnum, &look, ind_maxcomment);
+  	    look = skipwhite(look);
+***************
+*** 6836,6842 ****
+  		curwin->w_cursor.lnum = save_lnum;
+  		look = ml_get(our_paren_pos.lnum) + look_col;
+  	    }
+! 	    if (theline[0] == ')' || ind_unclosed == 0
+  		    || (!ind_unclosed_noignore && *look == '('
+  						    && ignore_paren_col == 0))
+  	    {
+--- 6919,6925 ----
+  		curwin->w_cursor.lnum = save_lnum;
+  		look = ml_get(our_paren_pos.lnum) + look_col;
+  	    }
+! 	    if (theline[0] == ')' || (ind_unclosed == 0 && is_if_for_while == 0)
+  		    || (!ind_unclosed_noignore && *look == '('
+  						    && ignore_paren_col == 0))
+  	    {
+***************
+*** 6907,6913 ****
+  	    {
+  		/* Line up with the start of the matching paren line. */
+  	    }
+! 	    else if (ind_unclosed == 0 || (!ind_unclosed_noignore
+  				    && *look == '(' && ignore_paren_col == 0))
+  	    {
+  		if (cur_amount != MAXCOL)
+--- 6990,6997 ----
+  	    {
+  		/* Line up with the start of the matching paren line. */
+  	    }
+! 	    else if ((ind_unclosed == 0 && is_if_for_while == 0)
+! 		     || (!ind_unclosed_noignore
+  				    && *look == '(' && ignore_paren_col == 0))
+  	    {
+  		if (cur_amount != MAXCOL)
+***************
+*** 6943,6949 ****
+  		    if (find_match_paren(ind_maxparen, ind_maxcomment) != NULL)
+  			amount += ind_unclosed2;
+  		    else
+! 			amount += ind_unclosed;
+  		}
+  		/*
+  		 * For a line starting with ')' use the minimum of the two
+--- 7027,7038 ----
+  		    if (find_match_paren(ind_maxparen, ind_maxcomment) != NULL)
+  			amount += ind_unclosed2;
+  		    else
+! 		    {
+! 			if (is_if_for_while)
+! 			    amount += ind_if_for_while;
+! 			else
+! 			    amount += ind_unclosed;
+! 		    }
+  		}
+  		/*
+  		 * For a line starting with ')' use the minimum of the two
+*** ../vim-7.3.491/src/testdir/test3.in	2011-12-14 20:21:29.000000000 +0100
+--- src/testdir/test3.in	2012-04-05 17:12:14.000000000 +0200
+***************
+*** 1574,1579 ****
+--- 1574,1793 ----
+  }
+  
+  STARTTEST
++ :set cino=k2s,(0
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 
++ 	if (   c1
++ 	&& (      c2
++ 	|| c3))
++ 	foo;
++ 	func( c1
++ 	&& (     c2
++ 	|| c3))
++ 	foo;
++ }
++ 
++ STARTTEST
++ :set cino=k2s,(s
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 
++ 	if (   c1
++ 	&& (      c2
++ 	|| c3))
++ 	foo;
++ 	func(   c1
++ 	&& (      c2
++ 	|| c3))
++ 	foo;
++ }
++ 
++ STARTTEST
++ :set cino=k2s,(s,U1
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 	&& (c22345
++ 	|| c3))
++ 	printf("foo\n");
++ 
++ 	c = c1 &&
++ 	(
++ 	c2 ||
++ 	c3
++ 	) && c4;
++ }
++ 
++ STARTTEST
++ :set cino=k2s,(0,W4
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 	&& (c22345
++ 	|| c3))
++ 	printf("foo\n");
++ 
++ 	if (   c1
++ 	&& (   c2
++ 	|| c3))
++ 	foo;
++ 
++ 	a_long_line(
++ 	argument,
++ 	argument);
++ 	a_short_line(argument,
++ 	argument);
++ }
++ 
++ STARTTEST
++ :set cino=k2s,u2
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 	&& (c22345
++ 	|| c3))
++ 	printf("foo\n");
++ }
++ 
++ STARTTEST
++ :set cino=k2s,(0,w1
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	&& condition2)
++ 	action();
++ 	function(argument1
++ 	&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 	c3))
++ 	foo;
++ 	if (c1 &&
++ 	(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 	&& (c22345
++ 	|| c3))
++ 	printf("foo\n");
++ 
++ 	if (   c1
++ 	&& (      c2
++ 	|| c3))
++ 	foo;
++ 	func(   c1
++ 	&& (      c2
++ 	|| c3))
++ 	foo;
++ }
++ 
++ STARTTEST
++ :set cino=k2,(s
++ 2kdd3j=][
++ ENDTEST
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	  && condition2)
++ 		action();
++ 	function(argument1
++ 		&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 		  c3))
++ 		foo;
++ 	if (c1 &&
++ 	  (c2 || c3))
++ 	{
++ 	}
++ }
++ 
++ STARTTEST
+  :set cino=N-s
+  /^NAMESPACESTART
+  =/^NAMESPACEEND
+*** ../vim-7.3.491/src/testdir/test3.ok	2011-12-14 20:21:29.000000000 +0100
+--- src/testdir/test3.ok	2012-04-05 17:12:14.000000000 +0200
+***************
+*** 1411,1416 ****
+--- 1411,1602 ----
+  }
+  
+  
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 			 && argument2);
++ 
++ 	if (c1 && (c2 ||
++ 				c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 
++ 	if (   c1
++ 			&& (      c2
++ 					  || c3))
++ 		foo;
++ 	func( c1
++ 		  && (     c2
++ 				   || c3))
++ 		foo;
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 		&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 				c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 
++ 	if (   c1
++ 			&& (      c2
++ 				|| c3))
++ 		foo;
++ 	func(   c1
++ 		&& (      c2
++ 			|| c3))
++ 		foo;
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 		&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 				c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 			&& (c22345
++ 				|| c3))
++ 		printf("foo\n");
++ 
++ 	c = c1 &&
++ 		(
++ 			c2 ||
++ 			c3
++ 		) && c4;
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 			 && argument2);
++ 
++ 	if (c1 && (c2 ||
++ 				c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 			&& (c22345
++ 				|| c3))
++ 		printf("foo\n");
++ 
++ 	if (   c1
++ 			&& (   c2
++ 				   || c3))
++ 		foo;
++ 
++ 	a_long_line(
++ 		argument,
++ 		argument);
++ 	a_short_line(argument,
++ 				 argument);
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 			&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 			  c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 			&& (c22345
++ 			  || c3))
++ 		printf("foo\n");
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 			&& condition2)
++ 		action();
++ 	function(argument1
++ 			 && argument2);
++ 
++ 	if (c1 && (c2 ||
++ 				c3))
++ 		foo;
++ 	if (c1 &&
++ 			(c2 || c3))
++ 	{
++ 	}
++ 	if (c123456789
++ 			&& (c22345
++ 				|| c3))
++ 		printf("foo\n");
++ 
++ 	if (   c1
++ 			&& (      c2
++ 				|| c3))
++ 		foo;
++ 	func(   c1
++ 		 && (      c2
++ 			 || c3))
++ 		foo;
++ }
++ 
++ 
++ void func(void)
++ {
++ 	if (condition1
++ 	  && condition2)
++ 		action();
++ 	function(argument1
++ 		&& argument2);
++ 
++ 	if (c1 && (c2 ||
++ 		  c3))
++ 		foo;
++ 	if (c1 &&
++ 	  (c2 || c3))
++ 	{
++ 	}
++ }
++ 
++ 
+  NAMESPACESTART
+  /* valid namespaces with normal indent */
+  namespace
+*** ../vim-7.3.491/src/version.c	2012-04-05 16:56:38.000000000 +0200
+--- src/version.c	2012-04-05 17:14:18.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     492,
+  /**/
+
+-- 
+You were lucky to have a LAKE! There were a hundred and sixty of
+us living in a small shoebox in the middle of the road.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.493 b/source/ap/vim/patches/7.3.493
new file mode 100644
index 00000000..ff662b25
--- /dev/null
+++ b/source/ap/vim/patches/7.3.493
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.493
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.493 (after 7.3.492)
+Problem:    Two unused variables.
+Solution:   Remove them. (Hong Xu)
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.492/src/misc1.c	2012-04-05 17:17:38.000000000 +0200
+--- src/misc1.c	2012-04-06 13:49:39.000000000 +0200
+***************
+*** 6489,6495 ****
+      int		cont_amount = 0;    /* amount for continuation line */
+      int		original_line_islabel;
+      int		added_to_amount = 0;
+-     int		is_if_for_while = 0;
+  
+      for (options = curbuf->b_p_cino; *options; )
+      {
+--- 6489,6494 ----
+***************
+*** 6876,6882 ****
+  		pos_T	    cursor_save = curwin->w_cursor;
+  		pos_T	    outermost;
+  		char_u	    *line;
+- 		int	    look_col;
+  
+  		trypos = &our_paren_pos;
+  		do {
+--- 6875,6880 ----
+*** ../vim-7.3.492/src/version.c	2012-04-05 17:17:38.000000000 +0200
+--- src/version.c	2012-04-06 13:50:21.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     493,
+  /**/
+
+-- 
+Not too long ago, compress was something you did to garbage...
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.494 b/source/ap/vim/patches/7.3.494
new file mode 100644
index 00000000..81bd24b7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.494
@@ -0,0 +1,186 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.494
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.494 (after 7.3.491)
+Problem:    Can't compile with Lua 9.1 or dynamic Lua.
+Solution:   Fix dll_ methods. Fix luado(). (Muraoka Taro, Luis Carvalho)
+Files:	    src/if_lua.c
+
+
+*** ../vim-7.3.493/src/if_lua.c	2012-04-05 16:53:56.000000000 +0200
+--- src/if_lua.c	2012-04-06 14:24:06.000000000 +0200
+***************
+*** 95,100 ****
+--- 95,101 ----
+  #define luaL_loadbufferx dll_luaL_loadbufferx
+  #define luaL_argerror dll_luaL_argerror
+  #endif
++ #define luaL_checkany dll_luaL_checkany
+  #define luaL_checklstring dll_luaL_checklstring
+  #define luaL_checkinteger dll_luaL_checkinteger
+  #define luaL_optinteger dll_luaL_optinteger
+***************
+*** 117,124 ****
+  #define lua_pcallk dll_lua_pcallk
+  #define lua_getglobal dll_lua_getglobal
+  #define lua_setglobal dll_lua_setglobal
+- #define lua_typename dll_lua_typename
+  #endif
+  #define lua_close dll_lua_close
+  #define lua_gettop dll_lua_gettop
+  #define lua_settop dll_lua_settop
+--- 118,125 ----
+  #define lua_pcallk dll_lua_pcallk
+  #define lua_getglobal dll_lua_getglobal
+  #define lua_setglobal dll_lua_setglobal
+  #endif
++ #define lua_typename dll_lua_typename
+  #define lua_close dll_lua_close
+  #define lua_gettop dll_lua_gettop
+  #define lua_settop dll_lua_settop
+***************
+*** 151,156 ****
+--- 152,158 ----
+  #define lua_rawset dll_lua_rawset
+  #define lua_rawseti dll_lua_rawseti
+  #define lua_setmetatable dll_lua_setmetatable
++ #define lua_next dll_lua_next
+  /* libs */
+  #define luaopen_base dll_luaopen_base
+  #define luaopen_table dll_luaopen_table
+***************
+*** 177,182 ****
+--- 179,185 ----
+  int (*dll_luaL_loadbufferx) (lua_State *L, const char *buff, size_t sz, const char *name, const char *mode);
+  int (*dll_luaL_argerror) (lua_State *L, int numarg, const char *extramsg);
+  #endif
++ void (*dll_luaL_checkany) (lua_State *L, int narg);
+  const char *(*dll_luaL_checklstring) (lua_State *L, int numArg, size_t *l);
+  lua_Integer (*dll_luaL_checkinteger) (lua_State *L, int numArg);
+  lua_Integer (*dll_luaL_optinteger) (lua_State *L, int nArg, lua_Integer def);
+***************
+*** 201,208 ****
+          int ctx, lua_CFunction k);
+  void (*dll_lua_getglobal) (lua_State *L, const char *var);
+  void (*dll_lua_setglobal) (lua_State *L, const char *var);
+- const char *(*dll_lua_typename) (lua_State *L, int tp);
+  #endif
+  void       (*dll_lua_close) (lua_State *L);
+  int (*dll_lua_gettop) (lua_State *L);
+  void (*dll_lua_settop) (lua_State *L, int idx);
+--- 204,211 ----
+          int ctx, lua_CFunction k);
+  void (*dll_lua_getglobal) (lua_State *L, const char *var);
+  void (*dll_lua_setglobal) (lua_State *L, const char *var);
+  #endif
++ const char *(*dll_lua_typename) (lua_State *L, int tp);
+  void       (*dll_lua_close) (lua_State *L);
+  int (*dll_lua_gettop) (lua_State *L);
+  void (*dll_lua_settop) (lua_State *L, int idx);
+***************
+*** 235,240 ****
+--- 238,244 ----
+  void (*dll_lua_rawset) (lua_State *L, int idx);
+  void (*dll_lua_rawseti) (lua_State *L, int idx, int n);
+  int (*dll_lua_setmetatable) (lua_State *L, int objindex);
++ int (*dll_lua_next) (lua_State *L, int idx);
+  /* libs */
+  int (*dll_luaopen_base) (lua_State *L);
+  int (*dll_luaopen_table) (lua_State *L);
+***************
+*** 268,273 ****
+--- 272,278 ----
+      {"luaL_loadbufferx", (luaV_function) &dll_luaL_loadbufferx},
+      {"luaL_argerror", (luaV_function) &dll_luaL_argerror},
+  #endif
++     {"luaL_checkany", (luaV_function) &dll_luaL_checkany},
+      {"luaL_checklstring", (luaV_function) &dll_luaL_checklstring},
+      {"luaL_checkinteger", (luaV_function) &dll_luaL_checkinteger},
+      {"luaL_optinteger", (luaV_function) &dll_luaL_optinteger},
+***************
+*** 290,297 ****
+      {"lua_pcallk", (luaV_function) &dll_lua_pcallk},
+      {"lua_getglobal", (luaV_function) &dll_lua_getglobal},
+      {"lua_setglobal", (luaV_function) &dll_lua_setglobal},
+-     {"lua_typename", (luaV_function) &dll_lua_typename},
+  #endif
+      {"lua_close", (luaV_function) &dll_lua_close},
+      {"lua_gettop", (luaV_function) &dll_lua_gettop},
+      {"lua_settop", (luaV_function) &dll_lua_settop},
+--- 295,302 ----
+      {"lua_pcallk", (luaV_function) &dll_lua_pcallk},
+      {"lua_getglobal", (luaV_function) &dll_lua_getglobal},
+      {"lua_setglobal", (luaV_function) &dll_lua_setglobal},
+  #endif
++     {"lua_typename", (luaV_function) &dll_lua_typename},
+      {"lua_close", (luaV_function) &dll_lua_close},
+      {"lua_gettop", (luaV_function) &dll_lua_gettop},
+      {"lua_settop", (luaV_function) &dll_lua_settop},
+***************
+*** 324,329 ****
+--- 329,335 ----
+      {"lua_rawset", (luaV_function) &dll_lua_rawset},
+      {"lua_rawseti", (luaV_function) &dll_lua_rawseti},
+      {"lua_setmetatable", (luaV_function) &dll_lua_setmetatable},
++     {"lua_next", (luaV_function) &dll_lua_next},
+      /* libs */
+      {"luaopen_base", (luaV_function) &dll_luaopen_base},
+      {"luaopen_table", (luaV_function) &dll_luaopen_table},
+***************
+*** 1828,1834 ****
+      }
+      luaV_setrange(L, eap->line1, eap->line2);
+      luaL_buffinit(L, &b);
+!     luaL_addlstring(&b, "return function(line) ", 22); /* header */
+      luaL_addlstring(&b, s, strlen(s));
+      luaL_addlstring(&b, " end", 4); /* footer */
+      luaL_pushresult(&b);
+--- 1834,1840 ----
+      }
+      luaV_setrange(L, eap->line1, eap->line2);
+      luaL_buffinit(L, &b);
+!     luaL_addlstring(&b, "return function(line, linenr) ", 30); /* header */
+      luaL_addlstring(&b, s, strlen(s));
+      luaL_addlstring(&b, " end", 4); /* footer */
+      luaL_pushresult(&b);
+***************
+*** 1845,1851 ****
+      {
+  	lua_pushvalue(L, -1); /* function */
+  	luaV_pushline(L, curbuf, l); /* current line as arg */
+! 	if (lua_pcall(L, 1, 1, 0))
+  	{
+  	    luaV_emsg(L);
+  	    break;
+--- 1851,1858 ----
+      {
+  	lua_pushvalue(L, -1); /* function */
+  	luaV_pushline(L, curbuf, l); /* current line as arg */
+! 	lua_pushinteger(L, l); /* current line number as arg */
+! 	if (lua_pcall(L, 2, 1, 0))
+  	{
+  	    luaV_emsg(L);
+  	    break;
+*** ../vim-7.3.493/src/version.c	2012-04-06 13:56:00.000000000 +0200
+--- src/version.c	2012-04-06 14:25:11.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     494,
+  /**/
+
+-- 
+Why doesn't Tarzan have a beard?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.495 b/source/ap/vim/patches/7.3.495
new file mode 100644
index 00000000..54c23062
--- /dev/null
+++ b/source/ap/vim/patches/7.3.495
@@ -0,0 +1,124 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.4
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.495 (after 7.3.492)
+Problem:    Compiler warnings.
+Solution:   Add function declaration.  Remove "offset" argument.
+Files:      src/misc1.c
+
+
+*** ../vim-7.3.494/src/misc1.c	2012-04-06 13:56:00.000000000 +0200
+--- src/misc1.c	2012-04-09 20:25:58.000000000 +0200
+***************
+*** 4972,4977 ****
+--- 4972,4978 ----
+  static int	cin_iselse __ARGS((char_u *));
+  static int	cin_isdo __ARGS((char_u *));
+  static int	cin_iswhileofdo __ARGS((char_u *, linenr_T, int));
++ static int	cin_is_if_for_while_before_offset __ARGS((char_u *line, int *poffset));
+  static int	cin_iswhileofdo_end __ARGS((int terminated, int	ind_maxparen, int ind_maxcomment));
+  static int	cin_isbreak __ARGS((char_u *));
+  static int	cin_is_cpp_baseclass __ARGS((colnr_T *col));
+***************
+*** 5771,5787 ****
+  }
+  
+  /*
+!  * Check whether in "p" there is an "if", "for" or "while" before offset.
+   * Return 0 if there is none.
+   * Otherwise return !0 and update "*poffset" to point to the place where the
+   * string was found.
+   */
+      static int
+! cin_is_if_for_while_before_offset(line, offset, poffset)
+      char_u *line;
+-     size_t offset;
+      int    *poffset;
+  {
+  
+      if (offset-- < 2)
+  	return 0;
+--- 5772,5788 ----
+  }
+  
+  /*
+!  * Check whether in "p" there is an "if", "for" or "while" before "*poffset".
+   * Return 0 if there is none.
+   * Otherwise return !0 and update "*poffset" to point to the place where the
+   * string was found.
+   */
+      static int
+! cin_is_if_for_while_before_offset(line, poffset)
+      char_u *line;
+      int    *poffset;
+  {
++     int offset = *poffset;
+  
+      if (offset-- < 2)
+  	return 0;
+***************
+*** 5805,5812 ****
+  		goto probablyFound;
+  	}
+      }
+- 
+      return 0;
+  probablyFound:
+      if (!offset || !vim_isIDc(line[offset - 1]))
+      {
+--- 5806,5813 ----
+  		goto probablyFound;
+  	}
+      }
+      return 0;
++ 
+  probablyFound:
+      if (!offset || !vim_isIDc(line[offset - 1]))
+      {
+***************
+*** 6890,6897 ****
+  		line = ml_get(outermost.lnum);
+  
+  		is_if_for_while =
+! 		    cin_is_if_for_while_before_offset(line, outermost.col,
+! 						      &outermost.col);
+  	    }
+  
+  	    amount = skip_label(our_paren_pos.lnum, &look, ind_maxcomment);
+--- 6891,6897 ----
+  		line = ml_get(outermost.lnum);
+  
+  		is_if_for_while =
+! 		    cin_is_if_for_while_before_offset(line, &outermost.col);
+  	    }
+  
+  	    amount = skip_label(our_paren_pos.lnum, &look, ind_maxcomment);
+*** ../vim-7.3.494/src/version.c	2012-04-06 14:30:55.000000000 +0200
+--- src/version.c	2012-04-09 20:41:44.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     495,
+  /**/
+
+-- 
+    [clop clop]
+GUARD #1:  Halt!  Who goes there?
+ARTHUR:    It is I, Arthur, son of Uther Pendragon, from the castle of
+           Camelot.  King of the Britons, defeator of the Saxons, sovereign of
+           all England!
+GUARD #1:  Pull the other one!
+                                  The Quest for the Holy Grail (Monty Python)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.496 b/source/ap/vim/patches/7.3.496
new file mode 100644
index 00000000..8b110517
--- /dev/null
+++ b/source/ap/vim/patches/7.3.496
@@ -0,0 +1,69 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.496
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.496
+Problem:    MS-DOS: When "diff" trips over difference in line separators some
+	    tests fail.
+Solution:   Make some .ok files use unix line separators. (David Pope)
+Files:	    src/testdir/Make_dos.mak, src/testdir/Make_ming.mak
+
+
+*** ../vim-7.3.495/src/testdir/Make_dos.mak	2012-04-05 16:56:38.000000000 +0200
+--- src/testdir/Make_dos.mak	2012-04-09 21:23:43.000000000 +0200
+***************
+*** 52,58 ****
+  
+  fixff:
+  	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=dos|upd" +q *.in *.ok
+! 	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=unix|upd" +q dotest.in
+  
+  clean:
+  	-del *.out
+--- 52,59 ----
+  
+  fixff:
+  	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=dos|upd" +q *.in *.ok
+! 	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=unix|upd" +q \
+! 		dotest.in test60.ok test71.ok test74.ok
+  
+  clean:
+  	-del *.out
+*** ../vim-7.3.495/src/testdir/Make_ming.mak	2012-04-05 16:56:38.000000000 +0200
+--- src/testdir/Make_ming.mak	2012-04-09 21:25:55.000000000 +0200
+***************
+*** 75,80 ****
+--- 75,82 ----
+  
+  fixff:
+  	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=dos|upd" +q *.in *.ok
++ 	-$(VIMPROG) -u dos.vim --noplugin "+argdo set ff=unix|upd" +q \
++ 		dotest.in test60.ok test71.ok test74.ok
+  
+  clean:
+  	-$(DEL) *.out
+*** ../vim-7.3.495/src/version.c	2012-04-09 20:42:20.000000000 +0200
+--- src/version.c	2012-04-13 19:10:04.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     496,
+  /**/
+
+-- 
+There are 2 kinds of people in my world: those who know Unix, Perl, Vim, GNU,
+Linux, etc, and those who know COBOL.  It gets very difficult for me at
+parties, not knowing which group to socialise with :-)
+						Sitaram Chamarty
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.497 b/source/ap/vim/patches/7.3.497
new file mode 100644
index 00000000..5cbffc4a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.497
@@ -0,0 +1,50 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.497
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.497
+Problem:    Crash when doing ":python print" and compiled with gcc and
+	    the optimizer enabled.
+Solution:   Avoid the crash, doesn't really fix the problem. (Christian
+	    Brabandt)
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.496/src/if_py_both.h	2012-02-04 20:17:21.000000000 +0100
+--- src/if_py_both.h	2012-04-20 13:24:31.000000000 +0200
+***************
+*** 77,82 ****
+--- 77,87 ----
+      if (!PyArg_ParseTuple(args, "et#", ENC_OPT, &str, &len))
+  	return NULL;
+  
++     /* TODO: This works around a gcc optimizer problem and avoids Vim
++      * from crashing.  Should find a real solution. */
++     if (str == NULL)
++ 	return NULL;
++ 
+      Py_BEGIN_ALLOW_THREADS
+      Python_Lock_Vim();
+      writer((writefn)(error ? emsg : msg), (char_u *)str, len);
+*** ../vim-7.3.496/src/version.c	2012-04-13 19:11:16.000000000 +0200
+--- src/version.c	2012-04-20 13:26:22.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     497,
+  /**/
+
+-- 
+There can't be a crisis today, my schedule is already full.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.498 b/source/ap/vim/patches/7.3.498
new file mode 100644
index 00000000..aa9c621e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.498
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.498
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.498
+Problem:    The behavior of the "- register changes depending on value of
+	    the 'clipboard' option. (Szamotulski)
+Solution:   Also set the "- register when the register is "*" or "+".
+	    (Christian Brabandt)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.497/src/ops.c	2012-03-23 14:16:19.000000000 +0100
+--- src/ops.c	2012-04-20 13:36:32.000000000 +0200
+***************
+*** 1720,1728 ****
+  		did_yank = TRUE;
+  	}
+  
+! 	/* Yank into small delete register when no register specified and the
+! 	 * delete is within one line. */
+! 	if (oap->regname == 0 && oap->motion_type != MLINE
+  						      && oap->line_count == 1)
+  	{
+  	    oap->regname = '-';
+--- 1720,1733 ----
+  		did_yank = TRUE;
+  	}
+  
+! 	/* Yank into small delete register when no named register specified
+! 	 * and the delete is within one line. */
+! 	if ((
+! #ifdef FEAT_CLIPBOARD
+!             ((clip_unnamed & CLIP_UNNAMED) && oap->regname == '*') ||
+!             ((clip_unnamed & CLIP_UNNAMED_PLUS) && oap->regname == '+') ||
+! #endif
+! 	    oap->regname == 0) && oap->motion_type != MLINE
+  						      && oap->line_count == 1)
+  	{
+  	    oap->regname = '-';
+*** ../vim-7.3.497/src/version.c	2012-04-20 13:31:16.000000000 +0200
+--- src/version.c	2012-04-20 13:45:26.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     498,
+  /**/
+
+-- 
+Did you ever stop to think...  and forget to start again?
+                                  -- Steven Wright
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.499 b/source/ap/vim/patches/7.3.499
new file mode 100644
index 00000000..4e45e4fb
--- /dev/null
+++ b/source/ap/vim/patches/7.3.499
@@ -0,0 +1,84 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.499
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.499
+Problem:    When using any interface language when Vim is waiting for a child
+	    process it gets confused by a child process started through the
+	    interface.
+Solution:   Always used waitpid() instead of wait(). (Yasuhiro Matsumoto)
+Files:      src/os_unix.c
+
+
+*** ../vim-7.3.498/src/os_unix.c	2012-02-05 22:51:27.000000000 +0100
+--- src/os_unix.c	2012-04-20 15:47:17.000000000 +0200
+***************
+*** 3734,3757 ****
+  
+      while (wait_pid != child)
+      {
+! # ifdef _THREAD_SAFE
+! 	/* Ugly hack: when compiled with Python threads are probably
+! 	 * used, in which case wait() sometimes hangs for no obvious
+! 	 * reason.  Use waitpid() instead and loop (like the GUI). */
+! #  ifdef __NeXT__
+  	wait_pid = wait4(child, status, WNOHANG, (struct rusage *)0);
+! #  else
+  	wait_pid = waitpid(child, status, WNOHANG);
+! #  endif
+  	if (wait_pid == 0)
+  	{
+  	    /* Wait for 1/100 sec before trying again. */
+  	    mch_delay(10L, TRUE);
+  	    continue;
+  	}
+- # else
+- 	wait_pid = wait(status);
+- # endif
+  	if (wait_pid <= 0
+  # ifdef ECHILD
+  		&& errno == ECHILD
+--- 3734,3754 ----
+  
+      while (wait_pid != child)
+      {
+! 	/* When compiled with Python threads are probably used, in which case
+! 	 * wait() sometimes hangs for no obvious reason.  Use waitpid()
+! 	 * instead and loop (like the GUI). Also needed for other interfaces,
+! 	 * they might call system(). */
+! # ifdef __NeXT__
+  	wait_pid = wait4(child, status, WNOHANG, (struct rusage *)0);
+! # else
+  	wait_pid = waitpid(child, status, WNOHANG);
+! # endif
+  	if (wait_pid == 0)
+  	{
+  	    /* Wait for 1/100 sec before trying again. */
+  	    mch_delay(10L, TRUE);
+  	    continue;
+  	}
+  	if (wait_pid <= 0
+  # ifdef ECHILD
+  		&& errno == ECHILD
+*** ../vim-7.3.498/src/version.c	2012-04-20 13:46:02.000000000 +0200
+--- src/version.c	2012-04-20 15:54:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     499,
+  /**/
+
+-- 
+It's not hard to meet expenses, they're everywhere.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.500 b/source/ap/vim/patches/7.3.500
new file mode 100644
index 00000000..b3b6a375
--- /dev/null
+++ b/source/ap/vim/patches/7.3.500
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.500
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.500
+Problem:    Ming makefile unconditionally sets WINVER.
+Solution:   Only defined when not already defined. (Yasuhiro Matsumoto)
+Files:	    src/Make_ming.mak
+
+
+*** ../vim-7.3.499/src/Make_ming.mak	2012-03-28 17:43:06.000000000 +0200
+--- src/Make_ming.mak	2012-04-20 16:03:50.000000000 +0200
+***************
+*** 51,57 ****
+--- 51,59 ----
+  # set to yes to enable OLE support
+  OLE=no
+  # Set the default $(WINVER) to make it work with pre-Win2k
++ ifndef WINVER
+  WINVER = 0x0400
++ endif
+  # Set to yes to enable Cscope support
+  CSCOPE=yes
+  # Set to yes to enable Netbeans support
+*** ../vim-7.3.499/src/version.c	2012-04-20 15:55:10.000000000 +0200
+--- src/version.c	2012-04-20 16:12:34.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     500,
+  /**/
+
+-- 
+Life is a gift, living is an art.		(Bram Moolenaar)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.501 b/source/ap/vim/patches/7.3.501
new file mode 100644
index 00000000..a74b0288
--- /dev/null
+++ b/source/ap/vim/patches/7.3.501
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.501
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.501
+Problem:    Error for "flush" not being defined when using Ruby command.
+Solution:   Defined "flush" as a no-op method. (Kent Sibilev)
+Files:	    src/if_ruby.c
+
+
+*** ../vim-7.3.500/src/if_ruby.c	2011-08-04 19:34:55.000000000 +0200
+--- src/if_ruby.c	2012-04-20 16:18:56.000000000 +0200
+***************
+*** 1238,1243 ****
+--- 1238,1248 ----
+      return Qnil;
+  }
+  
++ static VALUE f_nop(VALUE self)
++ {
++     return Qnil;
++ }
++ 
+  static VALUE f_p(int argc, VALUE *argv, VALUE self UNUSED)
+  {
+      int i;
+***************
+*** 1259,1264 ****
+--- 1264,1270 ----
+  
+      rb_stdout = rb_obj_alloc(rb_cObject);
+      rb_define_singleton_method(rb_stdout, "write", vim_message, 1);
++     rb_define_singleton_method(rb_stdout, "flush", f_nop, 0);
+      rb_define_global_function("p", f_p, -1);
+  }
+  
+*** ../vim-7.3.500/src/version.c	2012-04-20 16:13:21.000000000 +0200
+--- src/version.c	2012-04-20 16:19:03.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     501,
+  /**/
+
+-- 
+Q: What do you call a fish without an eye?
+A: fsh!
+Q: What do you call a deer with no eyes?
+A: no eye deer.
+Q: What do you call a deer with no eyes and no legs?
+A: still no eye deer.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.502 b/source/ap/vim/patches/7.3.502
new file mode 100644
index 00000000..c9710abf
--- /dev/null
+++ b/source/ap/vim/patches/7.3.502
@@ -0,0 +1,67 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.502
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.502
+Problem:    Netbeans insert halfway a line actually appends to the line.
+Solution:   Insert halfway the line. (Brian Victor)
+Files:	    src/netbeans.c
+
+
+*** ../vim-7.3.501/src/netbeans.c	2012-01-10 22:31:26.000000000 +0100
+--- src/netbeans.c	2012-04-20 19:44:31.000000000 +0200
+***************
+*** 1812,1825 ****
+  			char_u *oldline = ml_get(lnum);
+  			char_u *newline;
+  
+! 			/* Insert halfway a line.  For simplicity we assume we
+! 			 * need to append to the line. */
+  			newline = alloc_check(
+  				       (unsigned)(STRLEN(oldline) + len + 1));
+  			if (newline != NULL)
+  			{
+! 			    STRCPY(newline, oldline);
+  			    STRCAT(newline, args);
+  			    ml_replace(lnum, newline, FALSE);
+  			}
+  		    }
+--- 1812,1826 ----
+  			char_u *oldline = ml_get(lnum);
+  			char_u *newline;
+  
+! 			/* Insert halfway a line. */
+  			newline = alloc_check(
+  				       (unsigned)(STRLEN(oldline) + len + 1));
+  			if (newline != NULL)
+  			{
+! 			    mch_memmove(newline, oldline, (size_t)pos->col);
+! 			    newline[pos->col] = NUL;
+  			    STRCAT(newline, args);
++ 			    STRCAT(newline, oldline + pos->col);
+  			    ml_replace(lnum, newline, FALSE);
+  			}
+  		    }
+*** ../vim-7.3.501/src/version.c	2012-04-20 18:05:42.000000000 +0200
+--- src/version.c	2012-04-20 19:46:48.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     502,
+  /**/
+
+-- 
+Time flies like an arrow.
+Fruit flies like a banana.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.503 b/source/ap/vim/patches/7.3.503
new file mode 100644
index 00000000..5b776ae0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.503
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.503
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.503 (after 7.3.501)
+Problem:    Warning for unused argument.
+Solution:   Add UNUSED.
+Files:	    src/if_ruby.c
+
+
+*** ../vim-7.3.502/src/if_ruby.c	2012-04-20 18:05:42.000000000 +0200
+--- src/if_ruby.c	2012-04-25 12:26:38.000000000 +0200
+***************
+*** 1238,1244 ****
+      return Qnil;
+  }
+  
+! static VALUE f_nop(VALUE self)
+  {
+      return Qnil;
+  }
+--- 1238,1244 ----
+      return Qnil;
+  }
+  
+! static VALUE f_nop(VALUE self UNUSED)
+  {
+      return Qnil;
+  }
+*** ../vim-7.3.502/src/version.c	2012-04-20 19:47:00.000000000 +0200
+--- src/version.c	2012-04-25 12:27:30.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     503,
+  /**/
+
+-- 
+Why isn't there mouse-flavored cat food?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.504 b/source/ap/vim/patches/7.3.504
new file mode 100644
index 00000000..75227906
--- /dev/null
+++ b/source/ap/vim/patches/7.3.504
@@ -0,0 +1,87 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.504
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.504
+Problem:    Commands in help files are not highlighted.
+Solution:   Allow for commands in backticks.  Adjust CTRL-] to remove the
+	    backticks.
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.503/src/ex_cmds.c	2012-04-05 16:04:58.000000000 +0200
+--- src/ex_cmds.c	2012-04-25 12:51:41.000000000 +0200
+***************
+*** 3421,3427 ****
+  		     * and re-attach to buffer, perhaps.
+  		     */
+  		    if (curwin->w_s == &(curwin->w_buffer->b_s))
+! 			    curwin->w_s = &(buf->b_s);
+  #endif
+  		    curwin->w_buffer = buf;
+  		    curbuf = buf;
+--- 3421,3427 ----
+  		     * and re-attach to buffer, perhaps.
+  		     */
+  		    if (curwin->w_s == &(curwin->w_buffer->b_s))
+! 			curwin->w_s = &(buf->b_s);
+  #endif
+  		    curwin->w_buffer = buf;
+  		    curbuf = buf;
+***************
+*** 5965,5970 ****
+--- 5965,5993 ----
+  		break;
+  	  }
+  	  *d = NUL;
++ 
++ 	  if (*IObuff == '`')
++ 	  {
++ 	      if (d > IObuff + 2 && d[-1] == '`')
++ 	      {
++ 		  /* remove the backticks from `command` */
++ 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
++ 		  d[-2] = NUL;
++ 	      }
++ 	      else if (d > IObuff + 3 && d[-2] == '`' && d[-1] == ',')
++ 	      {
++ 		  /* remove the backticks and comma from `command`, */
++ 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
++ 		  d[-3] = NUL;
++ 	      }
++ 	      else if (d > IObuff + 4 && d[-3] == '`'
++ 					     && d[-2] == '\\' && d[-1] == '.')
++ 	      {
++ 		  /* remove the backticks and dot from `command`\. */
++ 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
++ 		  d[-4] = NUL;
++ 	      }
++ 	  }
+  	}
+      }
+  
+*** ../vim-7.3.503/src/version.c	2012-04-25 12:28:05.000000000 +0200
+--- src/version.c	2012-04-25 12:46:43.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     504,
+  /**/
+
+-- 
+TIM:   That is not an ordinary rabbit ... 'tis the most foul cruel and
+       bad-tempered thing you ever set eyes on.
+ROBIN: You tit.  I soiled my armour I was so scared!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.505 b/source/ap/vim/patches/7.3.505
new file mode 100644
index 00000000..1a8a7ea3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.505
@@ -0,0 +1,116 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.505
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.505
+Problem:    Test 11 fails on MS-Windows in some versions.
+Solution:   Fix #ifdefs for whether filtering through a pipe is possible. Move
+	    setting b_no_eol_lnum back to where it was before patch 7.3.124.
+	    (David Pope)
+Files:	    src/feature.h, src/eval.c, src/ex_cmds.c, src/fileio.c
+
+
+*** ../vim-7.3.504/src/feature.h	2011-10-20 21:09:25.000000000 +0200
+--- src/feature.h	2012-04-25 16:44:26.000000000 +0200
+***************
+*** 1316,1318 ****
+--- 1316,1326 ----
+  #ifdef FEAT_NORMAL
+  # define FEAT_PERSISTENT_UNDO
+  #endif
++ 
++ /*
++  * +filterpipe
++  */
++ #if (defined(UNIX) && !defined(USE_SYSTEM)) \
++ 	    || (defined(WIN3264) && defined(FEAT_GUI_W32))
++ # define FEAT_FILTERPIPE
++ #endif
+*** ../vim-7.3.504/src/eval.c	2012-04-05 16:53:55.000000000 +0200
+--- src/eval.c	2012-04-25 16:43:53.000000000 +0200
+***************
+*** 12090,12096 ****
+  #ifdef FEAT_SEARCHPATH
+  	"file_in_path",
+  #endif
+! #if (defined(UNIX) && !defined(USE_SYSTEM)) || defined(WIN3264)
+  	"filterpipe",
+  #endif
+  #ifdef FEAT_FIND_ID
+--- 12090,12096 ----
+  #ifdef FEAT_SEARCHPATH
+  	"file_in_path",
+  #endif
+! #ifdef FEAT_FILTERPIPE
+  	"filterpipe",
+  #endif
+  #ifdef FEAT_FIND_ID
+*** ../vim-7.3.504/src/ex_cmds.c	2012-04-25 12:57:23.000000000 +0200
+--- src/ex_cmds.c	2012-04-25 16:46:02.000000000 +0200
+***************
+*** 1113,1119 ****
+      if (do_out)
+  	shell_flags |= SHELL_DOOUT;
+  
+! #if (!defined(USE_SYSTEM) && defined(UNIX)) || defined(WIN3264)
+      if (!do_in && do_out && !p_stmp)
+      {
+  	/* Use a pipe to fetch stdout of the command, do not use a temp file. */
+--- 1113,1119 ----
+      if (do_out)
+  	shell_flags |= SHELL_DOOUT;
+  
+! #ifdef FEAT_FILTERPIPE
+      if (!do_in && do_out && !p_stmp)
+      {
+  	/* Use a pipe to fetch stdout of the command, do not use a temp file. */
+*** ../vim-7.3.504/src/fileio.c	2012-02-29 18:22:03.000000000 +0100
+--- src/fileio.c	2012-04-25 16:40:37.000000000 +0200
+***************
+*** 2655,2664 ****
+      }
+  #endif
+  
+-     /* Reset now, following writes should not omit the EOL.  Also, the line
+-      * number will become invalid because of edits. */
+-     curbuf->b_no_eol_lnum = 0;
+- 
+      if (recoverymode && error)
+  	return FAIL;
+      return OK;
+--- 2655,2660 ----
+***************
+*** 5098,5103 ****
+--- 5094,5101 ----
+      {
+  	aco_save_T	aco;
+  
++ 	curbuf->b_no_eol_lnum = 0;  /* in case it was set by the previous read */
++ 
+  	/*
+  	 * Apply POST autocommands.
+  	 * Careful: The autocommands may call buf_write() recursively!
+*** ../vim-7.3.504/src/version.c	2012-04-25 12:57:23.000000000 +0200
+--- src/version.c	2012-04-25 16:49:50.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     505,
+  /**/
+
+-- 
+Lose weight, NEVER Diet again with
+                  The "Invisible Weight Loss Patch"
+						(spam e-mail)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.506 b/source/ap/vim/patches/7.3.506
new file mode 100644
index 00000000..32be6fd1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.506
@@ -0,0 +1,100 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.506
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.506
+Problem:    GTK gives an error when selecting a non-existent file.
+Solution:   Add a handler to avoid the error. (Christian Brabandt)
+Files:	    src/gui_gtk.c
+
+
+*** ../vim-7.3.505/src/gui_gtk.c	2011-06-26 04:48:56.000000000 +0200
+--- src/gui_gtk.c	2012-04-25 17:08:58.000000000 +0200
+***************
+*** 90,95 ****
+--- 90,100 ----
+  static void entry_activate_cb(GtkWidget *widget, gpointer data);
+  static void entry_changed_cb(GtkWidget *entry, GtkWidget *dialog);
+  static void find_replace_cb(GtkWidget *widget, gpointer data);
++ static void recent_func_log_func(
++ 	const gchar *log_domain,
++ 	GLogLevelFlags log_level,
++ 	const gchar *message,
++ 	gpointer user_data);
+  
+  #if defined(FEAT_TOOLBAR)
+  /*
+***************
+*** 839,844 ****
+--- 844,851 ----
+      GtkWidget		*fc;
+  #endif
+      char_u		dirbuf[MAXPATHL];
++     guint		log_handler;
++     const gchar		*domain = "Gtk";
+  
+      title = CONVERT_TO_UTF8(title);
+  
+***************
+*** 853,858 ****
+--- 860,870 ----
+      /* If our pointer is currently hidden, then we should show it. */
+      gui_mch_mousehide(FALSE);
+  
++     /* Hack: The GTK file dialog warns when it can't access a new file, this
++      * makes it shut up. http://bugzilla.gnome.org/show_bug.cgi?id=664587 */
++     log_handler = g_log_set_handler(domain, G_LOG_LEVEL_WARNING,
++ 						  recent_func_log_func, NULL);
++ 
+  #ifdef USE_FILE_CHOOSER
+      /* We create the dialog each time, so that the button text can be "Open"
+       * or "Save" according to the action. */
+***************
+*** 916,921 ****
+--- 928,934 ----
+      gtk_widget_show(gui.filedlg);
+      gtk_main();
+  #endif
++     g_log_remove_handler(domain, log_handler);
+  
+      CONVERT_TO_UTF8_FREE(title);
+      if (gui.browse_fname == NULL)
+***************
+*** 1882,1884 ****
+--- 1895,1908 ----
+       * backwards compatibility anyway. */
+      do_cmdline_cmd((char_u *)"emenu ToolBar.FindHelp");
+  }
++ 
++     static void
++ recent_func_log_func(const gchar *log_domain UNUSED,
++ 		     GLogLevelFlags log_level UNUSED,
++ 		     const gchar *message UNUSED,
++ 		     gpointer user_data UNUSED)
++ {
++     /* We just want to suppress the warnings. */
++     /* http://bugzilla.gnome.org/show_bug.cgi?id=664587 */
++ }
++ 
+*** ../vim-7.3.505/src/version.c	2012-04-25 16:50:44.000000000 +0200
+--- src/version.c	2012-04-25 17:08:28.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     506,
+  /**/
+
+-- 
+Compilation process failed successfully.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.507 b/source/ap/vim/patches/7.3.507
new file mode 100644
index 00000000..c96561c3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.507
@@ -0,0 +1,149 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.507
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.507
+Problem:    When exiting with unsaved changes, selecting an existing file in
+	    the file dialog, there is no dialog to ask whether the existing
+	    file should be overwritten. (Felipe G. Nievinski)
+Solution:   Call check_overwrite() before writing. (Christian Brabandt)
+Files:	    src/ex_cmds.c, src/ex_cmds2.c, src/proto/ex_cmds.pro
+
+
+*** ../vim-7.3.506/src/ex_cmds.c	2012-04-25 16:50:44.000000000 +0200
+--- src/ex_cmds.c	2012-04-25 17:19:53.000000000 +0200
+***************
+*** 25,31 ****
+  static int read_viminfo_up_to_marks __ARGS((vir_T *virp, int forceit, int writing));
+  #endif
+  
+- static int check_overwrite __ARGS((exarg_T *eap, buf_T *buf, char_u *fname, char_u *ffname, int other));
+  static int check_readonly __ARGS((int *forceit, buf_T *buf));
+  #ifdef FEAT_AUTOCMD
+  static void delbuf_msg __ARGS((char_u *name));
+--- 25,30 ----
+***************
+*** 2722,2728 ****
+   * May set eap->forceit if a dialog says it's OK to overwrite.
+   * Return OK if it's OK, FAIL if it is not.
+   */
+!     static int
+  check_overwrite(eap, buf, fname, ffname, other)
+      exarg_T	*eap;
+      buf_T	*buf;
+--- 2721,2727 ----
+   * May set eap->forceit if a dialog says it's OK to overwrite.
+   * Return OK if it's OK, FAIL if it is not.
+   */
+!     int
+  check_overwrite(eap, buf, fname, ffname, other)
+      exarg_T	*eap;
+      buf_T	*buf;
+*** ../vim-7.3.506/src/ex_cmds2.c	2012-03-23 18:39:10.000000000 +0100
+--- src/ex_cmds2.c	2012-04-25 17:24:37.000000000 +0200
+***************
+*** 1489,1494 ****
+--- 1489,1495 ----
+      char_u	buff[DIALOG_MSG_SIZE];
+      int		ret;
+      buf_T	*buf2;
++     exarg_T     ea;
+  
+      dialog_msg(buff, _("Save changes to \"%s\"?"),
+  			(buf->b_fname != NULL) ?
+***************
+*** 1498,1510 ****
+      else
+  	ret = vim_dialog_yesnocancel(VIM_QUESTION, NULL, buff, 1);
+  
+      if (ret == VIM_YES)
+      {
+  #ifdef FEAT_BROWSE
+  	/* May get file name, when there is none */
+  	browse_save_fname(buf);
+  #endif
+! 	if (buf->b_fname != NULL)   /* didn't hit Cancel */
+  	    (void)buf_write_all(buf, FALSE);
+      }
+      else if (ret == VIM_NO)
+--- 1499,1517 ----
+      else
+  	ret = vim_dialog_yesnocancel(VIM_QUESTION, NULL, buff, 1);
+  
++     /* Init ea pseudo-structure, this is needed for the check_overwrite()
++      * function. */
++     ea.append = ea.forceit = FALSE;
++ 
+      if (ret == VIM_YES)
+      {
+  #ifdef FEAT_BROWSE
+  	/* May get file name, when there is none */
+  	browse_save_fname(buf);
+  #endif
+! 	if (buf->b_fname != NULL && check_overwrite(&ea, buf,
+! 				    buf->b_fname, buf->b_ffname, FALSE) == OK)
+! 	    /* didn't hit Cancel */
+  	    (void)buf_write_all(buf, FALSE);
+      }
+      else if (ret == VIM_NO)
+***************
+*** 1532,1538 ****
+  		/* May get file name, when there is none */
+  		browse_save_fname(buf2);
+  #endif
+! 		if (buf2->b_fname != NULL)   /* didn't hit Cancel */
+  		    (void)buf_write_all(buf2, FALSE);
+  #ifdef FEAT_AUTOCMD
+  		/* an autocommand may have deleted the buffer */
+--- 1539,1547 ----
+  		/* May get file name, when there is none */
+  		browse_save_fname(buf2);
+  #endif
+! 		if (buf2->b_fname != NULL && check_overwrite(&ea, buf2,
+! 				  buf2->b_fname, buf2->b_ffname, FALSE) == OK)
+! 		    /* didn't hit Cancel */
+  		    (void)buf_write_all(buf2, FALSE);
+  #ifdef FEAT_AUTOCMD
+  		/* an autocommand may have deleted the buffer */
+*** ../vim-7.3.506/src/proto/ex_cmds.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/ex_cmds.pro	2012-04-25 17:25:47.000000000 +0200
+***************
+*** 23,28 ****
+--- 23,29 ----
+  void ex_update __ARGS((exarg_T *eap));
+  void ex_write __ARGS((exarg_T *eap));
+  int do_write __ARGS((exarg_T *eap));
++ int check_overwrite __ARGS((exarg_T *eap, buf_T *buf, char_u *fname, char_u *ffname, int other));
+  void ex_wnext __ARGS((exarg_T *eap));
+  void do_wqall __ARGS((exarg_T *eap));
+  int not_writing __ARGS((void));
+*** ../vim-7.3.506/src/version.c	2012-04-25 17:10:12.000000000 +0200
+--- src/version.c	2012-04-25 17:17:30.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     507,
+  /**/
+
+-- 
+BROTHER MAYNARD: Armaments Chapter Two Verses Nine to Twenty One.
+ANOTHER MONK:    And St.  Attila raised his hand grenade up on high saying "O
+                 Lord bless this thy hand grenade that with it thou mayest
+                 blow thine enemies to tiny bits, in thy mercy. "and the Lord
+                 did grin and people did feast upon the lambs and sloths and
+                 carp and anchovies and orang-utans and breakfast cereals and
+                 fruit bats and...
+BROTHER MAYNARD: Skip a bit brother ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.508 b/source/ap/vim/patches/7.3.508
new file mode 100644
index 00000000..7b8e7b26
--- /dev/null
+++ b/source/ap/vim/patches/7.3.508
@@ -0,0 +1,85 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.508
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.508
+Problem:    Default for v:register is not set.
+Solution:   Init v:register in eval_init(). Correct for 'clipboard' before the
+	    main loop. (Ingo Karkat)
+Files:	    src/eval.c, src/main.c
+
+
+*** ../vim-7.3.507/src/eval.c	2012-04-25 16:50:44.000000000 +0200
+--- src/eval.c	2012-04-25 17:56:41.000000000 +0200
+***************
+*** 880,885 ****
+--- 880,886 ----
+  	    hash_add(&compat_hashtab, p->vv_di.di_key);
+      }
+      set_vim_var_nr(VV_SEARCHFORWARD, 1L);
++     set_reg_var(0);  /* default for v:register is not 0 but '"' */
+  
+  #ifdef EBCDIC
+      /*
+*** ../vim-7.3.507/src/main.c	2012-03-28 17:10:26.000000000 +0200
+--- src/main.c	2012-04-25 18:01:28.000000000 +0200
+***************
+*** 928,933 ****
+--- 928,945 ----
+      TIME_MSG("VimEnter autocommands");
+  #endif
+  
++ #if defined(FEAT_EVAL) && defined(FEAT_CLIPBOARD)
++     /* Adjust default register name for "unnamed" in 'clipboard'. Can only be
++      * done after the clipboard is available and all initial commands that may
++      * modify the 'clipboard' setting have run; i.e. just before entering the
++      * main loop. */
++     {
++ 	int default_regname = 0;
++ 	adjust_clip_reg(&default_regname);
++ 	set_reg_var(default_regname);
++     }
++ #endif
++ 
+  #if defined(FEAT_DIFF) && defined(FEAT_SCROLLBIND)
+      /* When a startup script or session file setup for diff'ing and
+       * scrollbind, sync the scrollbind now. */
+***************
+*** 1357,1363 ****
+  		{
+  		    apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname,
+  						    buf->b_fname, FALSE, buf);
+! 		    buf->b_changedtick = -1;    /* note that we did it already */
+  		    /* start all over, autocommands may mess up the lists */
+  		    next_tp = first_tabpage;
+  		    break;
+--- 1369,1375 ----
+  		{
+  		    apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname,
+  						    buf->b_fname, FALSE, buf);
+! 		    buf->b_changedtick = -1;  /* note that we did it already */
+  		    /* start all over, autocommands may mess up the lists */
+  		    next_tp = first_tabpage;
+  		    break;
+*** ../vim-7.3.507/src/version.c	2012-04-25 17:32:14.000000000 +0200
+--- src/version.c	2012-04-25 18:00:28.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     508,
+  /**/
+
+-- 
+I wonder, do vegetarians eat fruit bats?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.509 b/source/ap/vim/patches/7.3.509
new file mode 100644
index 00000000..8dfe9c09
--- /dev/null
+++ b/source/ap/vim/patches/7.3.509
@@ -0,0 +1,304 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.509
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.509
+Problem:    ":vimgrep" fails when 'autochdir' is set.
+Solution:   A more generic solution for changing directory. (Ben Fritz)
+Files:	    src/quickfix.c
+
+
+*** ../vim-7.3.508/src/quickfix.c	2012-03-07 20:13:44.000000000 +0100
+--- src/quickfix.c	2012-04-25 18:52:24.000000000 +0200
+***************
+*** 130,138 ****
+  static void	qf_fill_buffer __ARGS((qf_info_T *qi));
+  #endif
+  static char_u	*get_mef_name __ARGS((void));
+! static buf_T	*load_dummy_buffer __ARGS((char_u *fname));
+! static void	wipe_dummy_buffer __ARGS((buf_T *buf));
+! static void	unload_dummy_buffer __ARGS((buf_T *buf));
+  static qf_info_T *ll_get_or_alloc_list __ARGS((win_T *));
+  
+  /* Quickfix window check helper macro */
+--- 130,139 ----
+  static void	qf_fill_buffer __ARGS((qf_info_T *qi));
+  #endif
+  static char_u	*get_mef_name __ARGS((void));
+! static void	restore_start_dir __ARGS((char_u *dirname_start));
+! static buf_T	*load_dummy_buffer __ARGS((char_u *fname, char_u *dirname_start, char_u *resulting_dir));
+! static void	wipe_dummy_buffer __ARGS((buf_T *buf, char_u *dirname_start));
+! static void	unload_dummy_buffer __ARGS((buf_T *buf, char_u *dirname_start));
+  static qf_info_T *ll_get_or_alloc_list __ARGS((win_T *));
+  
+  /* Quickfix window check helper macro */
+***************
+*** 3237,3255 ****
+  
+  	    /* Load file into a buffer, so that 'fileencoding' is detected,
+  	     * autocommands applied, etc. */
+! 	    buf = load_dummy_buffer(fname);
+! 
+! 	    /* When autocommands changed directory: go back.  We assume it was
+! 	     * ":lcd %:p:h". */
+! 	    mch_dirname(dirname_now, MAXPATHL);
+! 	    if (STRCMP(dirname_start, dirname_now) != 0)
+! 	    {
+! 		exarg_T ea;
+! 
+! 		ea.arg = dirname_start;
+! 		ea.cmdidx = CMD_lcd;
+! 		ex_cd(&ea);
+! 	    }
+  
+  	    p_mls = save_mls;
+  #if defined(FEAT_AUTOCMD) && defined(FEAT_SYN_HL)
+--- 3238,3244 ----
+  
+  	    /* Load file into a buffer, so that 'fileencoding' is detected,
+  	     * autocommands applied, etc. */
+! 	    buf = load_dummy_buffer(fname, dirname_start, dirname_now);
+  
+  	    p_mls = save_mls;
+  #if defined(FEAT_AUTOCMD) && defined(FEAT_SYN_HL)
+***************
+*** 3320,3326 ****
+  		{
+  		    /* Never keep a dummy buffer if there is another buffer
+  		     * with the same name. */
+! 		    wipe_dummy_buffer(buf);
+  		    buf = NULL;
+  		}
+  		else if (!cmdmod.hide
+--- 3309,3315 ----
+  		{
+  		    /* Never keep a dummy buffer if there is another buffer
+  		     * with the same name. */
+! 		    wipe_dummy_buffer(buf, dirname_start);
+  		    buf = NULL;
+  		}
+  		else if (!cmdmod.hide
+***************
+*** 3336,3347 ****
+  		     * many swap files. */
+  		    if (!found_match)
+  		    {
+! 			wipe_dummy_buffer(buf);
+  			buf = NULL;
+  		    }
+  		    else if (buf != first_match_buf || (flags & VGR_NOJUMP))
+  		    {
+! 			unload_dummy_buffer(buf);
+  			buf = NULL;
+  		    }
+  		}
+--- 3325,3336 ----
+  		     * many swap files. */
+  		    if (!found_match)
+  		    {
+! 			wipe_dummy_buffer(buf, dirname_start);
+  			buf = NULL;
+  		    }
+  		    else if (buf != first_match_buf || (flags & VGR_NOJUMP))
+  		    {
+! 			unload_dummy_buffer(buf, dirname_start);
+  			buf = NULL;
+  		    }
+  		}
+***************
+*** 3487,3499 ****
+  }
+  
+  /*
+!  * Load file "fname" into a dummy buffer and return the buffer pointer.
+   * Returns NULL if it fails.
+-  * Must call unload_dummy_buffer() or wipe_dummy_buffer() later!
+   */
+      static buf_T *
+! load_dummy_buffer(fname)
+      char_u	*fname;
+  {
+      buf_T	*newbuf;
+      buf_T	*newbuf_to_wipe = NULL;
+--- 3476,3523 ----
+  }
+  
+  /*
+!  * Restore current working directory to "dirname_start" if they differ, taking
+!  * into account whether it is set locally or globally.
+!  */
+!     static void
+! restore_start_dir(dirname_start)
+!     char_u	*dirname_start;
+! {
+!     char_u *dirname_now = alloc(MAXPATHL);
+! 
+!     if (NULL != dirname_now)
+!     {
+! 	mch_dirname(dirname_now, MAXPATHL);
+! 	if (STRCMP(dirname_start, dirname_now) != 0)
+! 	{
+! 	    /* If the directory has changed, change it back by building up an
+! 	     * appropriate ex command and executing it. */
+! 	    exarg_T ea;
+! 
+! 	    ea.arg = dirname_start;
+! 	    ea.cmdidx = (curwin->w_localdir == NULL) ? CMD_cd : CMD_lcd;
+! 	    ex_cd(&ea);
+! 	}
+!     }
+! }
+! 
+! /*
+!  * Load file "fname" into a dummy buffer and return the buffer pointer,
+!  * placing the directory resulting from the buffer load into the
+!  * "resulting_dir" pointer. "resulting_dir" must be allocated by the caller
+!  * prior to calling this function. Restores directory to "dirname_start" prior
+!  * to returning, if autocmds or the 'autochdir' option have changed it.
+!  *
+!  * If creating the dummy buffer does not fail, must call unload_dummy_buffer()
+!  * or wipe_dummy_buffer() later!
+!  *
+   * Returns NULL if it fails.
+   */
+      static buf_T *
+! load_dummy_buffer(fname, dirname_start, resulting_dir)
+      char_u	*fname;
++     char_u	*dirname_start;  /* in: old directory */
++     char_u	*resulting_dir;  /* out: new directory */
+  {
+      buf_T	*newbuf;
+      buf_T	*newbuf_to_wipe = NULL;
+***************
+*** 3548,3569 ****
+  	    wipe_buffer(newbuf_to_wipe, FALSE);
+      }
+  
+      if (!buf_valid(newbuf))
+  	return NULL;
+      if (failed)
+      {
+! 	wipe_dummy_buffer(newbuf);
+  	return NULL;
+      }
+      return newbuf;
+  }
+  
+  /*
+!  * Wipe out the dummy buffer that load_dummy_buffer() created.
+   */
+      static void
+! wipe_dummy_buffer(buf)
+      buf_T	*buf;
+  {
+      if (curbuf != buf)		/* safety check */
+      {
+--- 3572,3604 ----
+  	    wipe_buffer(newbuf_to_wipe, FALSE);
+      }
+  
++     /*
++      * When autocommands/'autochdir' option changed directory: go back.
++      * Let the caller know what the resulting dir was first, in case it is
++      * important.
++      */
++     mch_dirname(resulting_dir, MAXPATHL);
++     restore_start_dir(dirname_start);
++ 
+      if (!buf_valid(newbuf))
+  	return NULL;
+      if (failed)
+      {
+! 	wipe_dummy_buffer(newbuf, dirname_start);
+  	return NULL;
+      }
+      return newbuf;
+  }
+  
+  /*
+!  * Wipe out the dummy buffer that load_dummy_buffer() created. Restores
+!  * directory to "dirname_start" prior to returning, if autocmds or the
+!  * 'autochdir' option have changed it.
+   */
+      static void
+! wipe_dummy_buffer(buf, dirname_start)
+      buf_T	*buf;
++     char_u	*dirname_start;
+  {
+      if (curbuf != buf)		/* safety check */
+      {
+***************
+*** 3583,3600 ****
+  	 * new aborting error, interrupt, or uncaught exception. */
+  	leave_cleanup(&cs);
+  #endif
+      }
+  }
+  
+  /*
+!  * Unload the dummy buffer that load_dummy_buffer() created.
+   */
+      static void
+! unload_dummy_buffer(buf)
+      buf_T	*buf;
+  {
+      if (curbuf != buf)		/* safety check */
+  	close_buffer(NULL, buf, DOBUF_UNLOAD, FALSE);
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+--- 3618,3645 ----
+  	 * new aborting error, interrupt, or uncaught exception. */
+  	leave_cleanup(&cs);
+  #endif
++ 	/* When autocommands/'autochdir' option changed directory: go back. */
++ 	restore_start_dir(dirname_start);
+      }
+  }
+  
+  /*
+!  * Unload the dummy buffer that load_dummy_buffer() created. Restores
+!  * directory to "dirname_start" prior to returning, if autocmds or the
+!  * 'autochdir' option have changed it.
+   */
+      static void
+! unload_dummy_buffer(buf, dirname_start)
+      buf_T	*buf;
++     char_u	*dirname_start;
+  {
+      if (curbuf != buf)		/* safety check */
++     {
+  	close_buffer(NULL, buf, DOBUF_UNLOAD, FALSE);
++ 
++ 	/* When autocommands/'autochdir' option changed directory: go back. */
++ 	restore_start_dir(dirname_start);
++     }
+  }
+  
+  #if defined(FEAT_EVAL) || defined(PROTO)
+*** ../vim-7.3.508/src/version.c	2012-04-25 18:24:24.000000000 +0200
+--- src/version.c	2012-04-25 18:43:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     509,
+  /**/
+
+-- 
+   Arthur pulls Pin out.  The MONK blesses the grenade as ...
+ARTHUR:  (quietly) One, two, five ...
+GALAHAD: Three, sir!
+ARTHUR:  Three.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.510 b/source/ap/vim/patches/7.3.510
new file mode 100644
index 00000000..afe10414
--- /dev/null
+++ b/source/ap/vim/patches/7.3.510
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.510
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.510
+Problem:    Test 77 fails on Solaris 7. (Michael Soyka)
+Solution:   Replace any tabs with spaces.
+Files:	    src/testdir/test77.in
+
+
+*** ../vim-7.3.509/src/testdir/test77.in	2011-03-22 18:10:34.000000000 +0100
+--- src/testdir/test77.in	2012-04-30 11:30:31.000000000 +0200
+***************
+*** 21,27 ****
+  :while i <= 2000000 | call append(i, range(i, i + 99)) | let i += 100 | endwhile
+  ggdd
+  :w! Xtest
+! :!cksum Xtest > test.out
+  :qa!
+  ENDTEST
+  
+--- 21,29 ----
+  :while i <= 2000000 | call append(i, range(i, i + 99)) | let i += 100 | endwhile
+  ggdd
+  :w! Xtest
+! :r !cksum Xtest
+! :s/\s/ /g
+! :.w! test.out
+  :qa!
+  ENDTEST
+  
+*** ../vim-7.3.509/src/version.c	2012-04-25 18:57:17.000000000 +0200
+--- src/version.c	2012-04-30 11:33:35.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     510,
+  /**/
+
+-- 
+SIGFUN -- signature too funny (core dumped)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.511 b/source/ap/vim/patches/7.3.511
new file mode 100644
index 00000000..a2b6dce0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.511
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.511
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.511
+Problem:    Using a FileReadCmd autocommand that does ":e! {file}" may cause a
+	    crash. (Christian Brabandt)
+Solution:   Properly restore curwin->w_s.
+Files:	    src/fileio.c
+
+
+*** ../vim-7.3.510/src/fileio.c	2012-04-25 16:50:44.000000000 +0200
+--- src/fileio.c	2012-04-30 17:04:22.000000000 +0200
+***************
+*** 8982,8987 ****
+--- 8982,8991 ----
+  		    && buf_valid(aco->new_curbuf)
+  		    && aco->new_curbuf->b_ml.ml_mfp != NULL)
+  	    {
++ # if defined(FEAT_SYN_HL) || defined(FEAT_SPELL)
++ 		if (curwin->w_s == &curbuf->b_s)
++ 		    curwin->w_s = &aco->new_curbuf->b_s;
++ # endif
+  		--curbuf->b_nwindows;
+  		curbuf = aco->new_curbuf;
+  		curwin->w_buffer = curbuf;
+*** ../vim-7.3.510/src/version.c	2012-04-30 11:34:20.000000000 +0200
+--- src/version.c	2012-04-30 17:01:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     511,
+  /**/
+
+-- 
+There is no right or wrong, there is only your personal opinion.
+                 (Bram Moolenaar)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.512 b/source/ap/vim/patches/7.3.512
new file mode 100644
index 00000000..838ae3e2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.512
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.512
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.512
+Problem:    undofile() returns a useless name when passed an empty string.
+Solution:   Return an empty string. (Christian Brabandt)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.511/src/eval.c	2012-04-25 18:24:24.000000000 +0200
+--- src/eval.c	2012-04-30 17:23:26.000000000 +0200
+***************
+*** 18259,18269 ****
+      rettv->v_type = VAR_STRING;
+  #ifdef FEAT_PERSISTENT_UNDO
+      {
+! 	char_u *ffname = FullName_save(get_tv_string(&argvars[0]), FALSE);
+  
+! 	if (ffname != NULL)
+! 	    rettv->vval.v_string = u_get_undo_file_name(ffname, FALSE);
+! 	vim_free(ffname);
+      }
+  #else
+      rettv->vval.v_string = NULL;
+--- 18259,18279 ----
+      rettv->v_type = VAR_STRING;
+  #ifdef FEAT_PERSISTENT_UNDO
+      {
+! 	char_u *fname = get_tv_string(&argvars[0]);
+  
+! 	if (*fname == NUL)
+! 	{
+! 	    /* If there is no file name there will be no undo file. */
+! 	    rettv->vval.v_string = NULL;
+! 	}
+! 	else
+! 	{
+! 	    char_u *ffname = FullName_save(fname, FALSE);
+! 
+! 	    if (ffname != NULL)
+! 		rettv->vval.v_string = u_get_undo_file_name(ffname, FALSE);
+! 	    vim_free(ffname);
+! 	}
+      }
+  #else
+      rettv->vval.v_string = NULL;
+*** ../vim-7.3.511/src/version.c	2012-04-30 17:04:47.000000000 +0200
+--- src/version.c	2012-04-30 17:24:42.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     512,
+  /**/
+
+-- 
+It is illegal for a driver to be blindfolded while operating a vehicle.
+		[real standing law in Alabama, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.513 b/source/ap/vim/patches/7.3.513
new file mode 100644
index 00000000..396969f5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.513
@@ -0,0 +1,129 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.513
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.513
+Problem:    Cannot use CTRL-E and CTRL-Y with "r".
+Solution:   Make CTRL-E and CTRL-Y work like in Insert mode. (Christian
+	    Brabandt)
+Files:	    src/edit.c, src/normal.c, src/proto/edit.pro
+
+
+*** ../vim-7.3.512/src/edit.c	2012-04-05 16:07:01.000000000 +0200
+--- src/edit.c	2012-04-30 17:53:47.000000000 +0200
+***************
+*** 253,259 ****
+  #ifdef FEAT_DIGRAPHS
+  static int  ins_digraph __ARGS((void));
+  #endif
+- static int  ins_copychar __ARGS((linenr_T lnum));
+  static int  ins_ctrl_ey __ARGS((int tc));
+  #ifdef FEAT_SMARTINDENT
+  static void ins_try_si __ARGS((int c));
+--- 253,258 ----
+***************
+*** 9899,9905 ****
+   * Handle CTRL-E and CTRL-Y in Insert mode: copy char from other line.
+   * Returns the char to be inserted, or NUL if none found.
+   */
+!     static int
+  ins_copychar(lnum)
+      linenr_T	lnum;
+  {
+--- 9898,9904 ----
+   * Handle CTRL-E and CTRL-Y in Insert mode: copy char from other line.
+   * Returns the char to be inserted, or NUL if none found.
+   */
+!     int
+  ins_copychar(lnum)
+      linenr_T	lnum;
+  {
+*** ../vim-7.3.512/src/normal.c	2012-03-28 12:59:53.000000000 +0200
+--- src/normal.c	2012-04-30 18:06:13.000000000 +0200
+***************
+*** 7070,7076 ****
+  	    for (n = cap->count1; n > 0; --n)
+  	    {
+  		State = REPLACE;
+! 		ins_char(cap->nchar);
+  		State = old_State;
+  		if (cap->ncharC1 != 0)
+  		    ins_char(cap->ncharC1);
+--- 7070,7087 ----
+  	    for (n = cap->count1; n > 0; --n)
+  	    {
+  		State = REPLACE;
+! 		if (cap->nchar == Ctrl_E || cap->nchar == Ctrl_Y)
+! 		{
+! 		    int c = ins_copychar(curwin->w_cursor.lnum
+! 					   + (cap->nchar == Ctrl_Y ? -1 : 1));
+! 		    if (c != NUL)
+! 			ins_char(c);
+! 		    else
+! 			/* will be decremented further down */
+! 			++curwin->w_cursor.col;
+! 		}
+! 		else
+! 		    ins_char(cap->nchar);
+  		State = old_State;
+  		if (cap->ncharC1 != 0)
+  		    ins_char(cap->ncharC1);
+***************
+*** 7092,7098 ****
+  		 * line will be changed.
+  		 */
+  		ptr = ml_get_buf(curbuf, curwin->w_cursor.lnum, TRUE);
+! 		ptr[curwin->w_cursor.col] = cap->nchar;
+  		if (p_sm && msg_silent == 0)
+  		    showmatch(cap->nchar);
+  		++curwin->w_cursor.col;
+--- 7103,7117 ----
+  		 * line will be changed.
+  		 */
+  		ptr = ml_get_buf(curbuf, curwin->w_cursor.lnum, TRUE);
+! 		if (cap->nchar == Ctrl_E || cap->nchar == Ctrl_Y)
+! 		{
+! 		  int c = ins_copychar(curwin->w_cursor.lnum
+! 					   + (cap->nchar == Ctrl_Y ? -1 : 1));
+! 		  if (c != NUL)
+! 		    ptr[curwin->w_cursor.col] = c;
+! 		}
+! 		else
+! 		    ptr[curwin->w_cursor.col] = cap->nchar;
+  		if (p_sm && msg_silent == 0)
+  		    showmatch(cap->nchar);
+  		++curwin->w_cursor.col;
+*** ../vim-7.3.512/src/proto/edit.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/edit.pro	2012-04-30 17:54:41.000000000 +0200
+***************
+*** 39,42 ****
+--- 39,43 ----
+  int hkmap __ARGS((int c));
+  void ins_scroll __ARGS((void));
+  void ins_horscroll __ARGS((void));
++ int ins_copychar __ARGS((linenr_T lnum));
+  /* vim: set ft=c : */
+*** ../vim-7.3.512/src/version.c	2012-04-30 17:35:44.000000000 +0200
+--- src/version.c	2012-04-30 18:17:52.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     513,
+  /**/
+
+-- 
+It is illegal for anyone to try and stop a child from playfully jumping over
+puddles of water.
+		[real standing law in California, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.514 b/source/ap/vim/patches/7.3.514
new file mode 100644
index 00000000..79620f0e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.514
@@ -0,0 +1,232 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.514
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.514
+Problem:    No completion for :history command.
+Solution:   Add the completion and update the docs. Also fix ":behave"
+	    completion. (Dominique Pelle)
+Files:	    runtime/doc/cmdline.txt, runtime/doc/map.txt, src/ex_docmd.c,
+	    src/ex_getln.c, src/vim.h
+
+
+*** ../vim-7.3.513/runtime/doc/cmdline.txt	2010-08-15 21:57:17.000000000 +0200
+--- runtime/doc/cmdline.txt	2012-04-30 18:30:00.000000000 +0200
+***************
+*** 330,341 ****
+  
+  :his[tory] [{name}] [{first}][, [{last}]]
+  		List the contents of history {name} which can be:
+! 		c[md]	 or :	command-line history
+! 		s[earch] or /	search string history
+! 		e[xpr]	 or =	expression register history
+! 		i[nput]	 or @	input line history
+! 		d[ebug]	 or >	debug command history
+! 		a[ll]		all of the above
+  		{not in Vi}
+  
+  		If the numbers {first} and/or {last} are given, the respective
+--- 330,341 ----
+  
+  :his[tory] [{name}] [{first}][, [{last}]]
+  		List the contents of history {name} which can be:
+! 		c[md]	 or :		command-line history
+! 		s[earch] or / or ?	search string history
+! 		e[xpr]	 or =		expression register history
+! 		i[nput]	 or @		input line history
+! 		d[ebug]	 or >		debug command history
+! 		a[ll]			all of the above
+  		{not in Vi}
+  
+  		If the numbers {first} and/or {last} are given, the respective
+*** ../vim-7.3.513/runtime/doc/map.txt	2011-07-20 16:36:35.000000000 +0200
+--- runtime/doc/map.txt	2012-04-30 18:30:00.000000000 +0200
+***************
+*** 1202,1207 ****
+--- 1219,1225 ----
+  
+  	-complete=augroup	autocmd groups
+  	-complete=buffer	buffer names
++ 	-complete=behave	:behave suboptions
+  	-complete=color		color schemes
+  	-complete=command	Ex command (and arguments)
+  	-complete=compiler	compilers
+***************
+*** 1216,1221 ****
+--- 1234,1240 ----
+  	-complete=function	function name
+  	-complete=help		help subjects
+  	-complete=highlight	highlight groups
++ 	-complete=history	:history suboptions
+  	-complete=locale	locale names (as output of locale -a)
+  	-complete=mapping	mapping name
+  	-complete=menu		menus
+*** ../vim-7.3.513/src/ex_docmd.c	2012-02-12 20:13:55.000000000 +0100
+--- src/ex_docmd.c	2012-04-30 18:33:27.000000000 +0200
+***************
+*** 3920,3927 ****
+--- 3920,3935 ----
+  #endif
+  	case CMD_behave:
+  	    xp->xp_context = EXPAND_BEHAVE;
++ 	    xp->xp_pattern = arg;
+  	    break;
+  
++ #if defined(FEAT_CMDHIST)
++ 	case CMD_history:
++ 	    xp->xp_context = EXPAND_HISTORY;
++ 	    xp->xp_pattern = arg;
++ 	    break;
++ #endif
++ 
+  #endif /* FEAT_CMDL_COMPL */
+  
+  	default:
+***************
+*** 5329,5334 ****
+--- 5337,5343 ----
+  } command_complete[] =
+  {
+      {EXPAND_AUGROUP, "augroup"},
++     {EXPAND_BEHAVE, "behave"},
+      {EXPAND_BUFFERS, "buffer"},
+      {EXPAND_COLORS, "color"},
+      {EXPAND_COMMANDS, "command"},
+***************
+*** 5350,5357 ****
+      {EXPAND_FUNCTIONS, "function"},
+      {EXPAND_HELP, "help"},
+      {EXPAND_HIGHLIGHT, "highlight"},
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+!         && (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+      {EXPAND_LOCALES, "locale"},
+  #endif
+      {EXPAND_MAPPINGS, "mapping"},
+--- 5359,5369 ----
+      {EXPAND_FUNCTIONS, "function"},
+      {EXPAND_HELP, "help"},
+      {EXPAND_HIGHLIGHT, "highlight"},
++ #if defined(FEAT_CMDHIST)
++     {EXPAND_HISTORY, "history"},
++ #endif
+  #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
+! 	&& (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE))
+      {EXPAND_LOCALES, "locale"},
+  #endif
+      {EXPAND_MAPPINGS, "mapping"},
+*** ../vim-7.3.513/src/ex_getln.c	2012-03-07 19:16:49.000000000 +0100
+--- src/ex_getln.c	2012-04-30 18:36:04.000000000 +0200
+***************
+*** 25,31 ****
+      int		cmdlen;		/* number of chars in command line */
+      int		cmdpos;		/* current cursor position */
+      int		cmdspos;	/* cursor column on screen */
+!     int		cmdfirstc;	/* ':', '/', '?', '=' or NUL */
+      int		cmdindent;	/* number of spaces before cmdline */
+      char_u	*cmdprompt;	/* message in front of cmdline */
+      int		cmdattr;	/* attributes for prompt */
+--- 25,31 ----
+      int		cmdlen;		/* number of chars in command line */
+      int		cmdpos;		/* current cursor position */
+      int		cmdspos;	/* cursor column on screen */
+!     int		cmdfirstc;	/* ':', '/', '?', '=', '>' or NUL */
+      int		cmdindent;	/* number of spaces before cmdline */
+      char_u	*cmdprompt;	/* message in front of cmdline */
+      int		cmdattr;	/* attributes for prompt */
+***************
+*** 111,116 ****
+--- 111,119 ----
+  #ifdef FEAT_CMDL_COMPL
+  static int	expand_shellcmd __ARGS((char_u *filepat, int *num_file, char_u ***file, int flagsarg));
+  static int	ExpandRTDir __ARGS((char_u *pat, int *num_file, char_u ***file, char *dirname[]));
++ # ifdef FEAT_CMDHIST
++ static char_u	*get_history_arg __ARGS((expand_T *xp, int idx));
++ # endif
+  # if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL)
+  static int	ExpandUserDefined __ARGS((expand_T *xp, regmatch_T *regmatch, int *num_file, char_u ***file));
+  static int	ExpandUserList __ARGS((expand_T *xp, int *num_file, char_u ***file));
+***************
+*** 4628,4633 ****
+--- 4631,4639 ----
+  	{
+  	    {EXPAND_COMMANDS, get_command_name, FALSE, TRUE},
+  	    {EXPAND_BEHAVE, get_behave_arg, TRUE, TRUE},
++ #ifdef FEAT_CMDHIST
++ 	    {EXPAND_HISTORY, get_history_arg, TRUE, TRUE},
++ #endif
+  #ifdef FEAT_USR_CMDS
+  	    {EXPAND_USER_COMMANDS, get_user_commands, FALSE, TRUE},
+  	    {EXPAND_USER_CMD_FLAGS, get_user_cmd_flags, FALSE, TRUE},
+***************
+*** 5245,5250 ****
+--- 5251,5284 ----
+      NULL
+  };
+  
++ #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
++ /*
++  * Function given to ExpandGeneric() to obtain the possible first
++  * arguments of the ":history command.
++  */
++     static char_u *
++ get_history_arg(xp, idx)
++     expand_T	*xp UNUSED;
++     int		idx;
++ {
++     static char_u compl[2] = { NUL, NUL };
++     char *short_names = ":=@>?/";
++     int short_names_count = STRLEN(short_names);
++     int history_name_count = sizeof(history_names) / sizeof(char *) - 1;
++ 
++     if (idx < short_names_count)
++     {
++ 	compl[0] = (char_u)short_names[idx];
++ 	return compl;
++     }
++     if (idx < short_names_count + history_name_count)
++ 	return (char_u *)history_names[idx - short_names_count];
++     if (idx == short_names_count + history_name_count)
++ 	return (char_u *)"all";
++     return NULL;
++ }
++ #endif
++ 
+  /*
+   * init_history() - Initialize the command line history.
+   * Also used to re-allocate the history when the size changes.
+*** ../vim-7.3.513/src/vim.h	2012-03-23 16:25:13.000000000 +0100
+--- src/vim.h	2012-04-30 18:30:00.000000000 +0200
+***************
+*** 781,786 ****
+--- 781,787 ----
+  #define EXPAND_FILES_IN_PATH	38
+  #define EXPAND_OWNSYNTAX	39
+  #define EXPAND_LOCALES		40
++ #define EXPAND_HISTORY		41
+  
+  /* Values for exmode_active (0 is no exmode) */
+  #define EXMODE_NORMAL		1
+*** ../vim-7.3.513/src/version.c	2012-04-30 18:18:43.000000000 +0200
+--- src/version.c	2012-04-30 18:36:19.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     514,
+  /**/
+
+-- 
+You can be stopped by the police for biking over 65 miles per hour.
+You are not allowed to walk across a street on your hands.
+		[real standing laws in Connecticut, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.515 b/source/ap/vim/patches/7.3.515
new file mode 100644
index 00000000..dad6f617
--- /dev/null
+++ b/source/ap/vim/patches/7.3.515
@@ -0,0 +1,68 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.515
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.515
+Problem:    'wildignorecase' only applies to the last part of the path.
+Solution:   Also ignore case for letters earlier in the path.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.514/src/misc1.c	2012-04-09 20:42:20.000000000 +0200
+--- src/misc1.c	2012-04-30 21:00:18.000000000 +0200
+***************
+*** 9461,9466 ****
+--- 9461,9467 ----
+  
+      /*
+       * Find the first part in the path name that contains a wildcard.
++      * When EW_ICASE is set every letter is considered to be a wildcard.
+       * Copy it into "buf", including the preceding characters.
+       */
+      p = buf;
+***************
+*** 9480,9486 ****
+  	    s = p + 1;
+  	}
+  	else if (path_end >= path + wildoff
+! 			 && vim_strchr((char_u *)"*?[{~$", *path_end) != NULL)
+  	    e = p;
+  #ifdef FEAT_MBYTE
+  	if (has_mbyte)
+--- 9481,9492 ----
+  	    s = p + 1;
+  	}
+  	else if (path_end >= path + wildoff
+! 			 && (vim_strchr((char_u *)"*?[{~$", *path_end) != NULL
+! #ifndef CASE_INSENSITIVE_FILENAME
+! 			     || ((flags & EW_ICASE)
+! 					       && isalpha(PTR2CHAR(path_end)))
+! #endif
+! 			     ))
+  	    e = p;
+  #ifdef FEAT_MBYTE
+  	if (has_mbyte)
+*** ../vim-7.3.514/src/version.c	2012-04-30 18:48:38.000000000 +0200
+--- src/version.c	2012-04-30 21:05:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     515,
+  /**/
+
+-- 
+If an elephant is left tied to a parking meter, the parking fee has to be paid
+just as it would for a vehicle.
+		[real standing law in Florida, United States of America]
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.516 b/source/ap/vim/patches/7.3.516
new file mode 100644
index 00000000..d43be5a0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.516
@@ -0,0 +1,94 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.516
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.516
+Problem:    extend(o, o) may crash Vim.
+Solution:   Fix crash and add test. (Thinca and Hirohito Higashi)
+Files:	    src/eval.c, src/testdir/test55.in, src/testdir/test55.ok
+
+
+*** ../vim-7.3.515/src/eval.c	2012-04-30 17:35:44.000000000 +0200
+--- src/eval.c	2012-05-18 12:02:44.000000000 +0200
+***************
+*** 10191,10197 ****
+  			EMSG2(_("E737: Key already exists: %s"), hi2->hi_key);
+  			break;
+  		    }
+! 		    else if (*action == 'f')
+  		    {
+  			clear_tv(&di1->di_tv);
+  			copy_tv(&HI2DI(hi2)->di_tv, &di1->di_tv);
+--- 10191,10197 ----
+  			EMSG2(_("E737: Key already exists: %s"), hi2->hi_key);
+  			break;
+  		    }
+! 		    else if (*action == 'f' && HI2DI(hi2) != di1)
+  		    {
+  			clear_tv(&di1->di_tv);
+  			copy_tv(&HI2DI(hi2)->di_tv, &di1->di_tv);
+*** ../vim-7.3.515/src/testdir/test55.in	2010-11-10 20:31:24.000000000 +0100
+--- src/testdir/test55.in	2012-05-18 11:57:23.000000000 +0200
+***************
+*** 352,357 ****
+--- 352,375 ----
+  :let dict4copy = deepcopy(dict4)
+  :$put =(l == lcopy)
+  :$put =(dict4 == dict4copy)
++ :"
++ :" Pass the same List to extend()
++ :let l = [1, 2, 3, 4, 5]
++ :call extend(l, l)
++ :$put =string(l)
++ :"
++ :" Pass the same Dict to extend()
++ :let d = { 'a': {'b': 'B'}}
++ :call extend(d, d)
++ :$put =string(d)
++ :"
++ :" Pass the same Dict to extend() with "error"
++ :try
++ :  call extend(d, d, "error")
++ :catch
++ :  $put =v:exception[:15] . v:exception[-1:-1]
++ :endtry
++ :$put =string(d)
+  :endfun
+  :"
+  :call Test(1, 2, [3, 4], {5: 6})  " This may take a while
+*** ../vim-7.3.515/src/testdir/test55.ok	2010-11-10 20:31:24.000000000 +0100
+--- src/testdir/test55.ok	2012-05-18 11:57:01.000000000 +0200
+***************
+*** 111,113 ****
+--- 111,117 ----
+  0
+  1
+  1
++ [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
++ {'a': {'b': 'B'}}
++ Vim(call):E737: a
++ {'a': {'b': 'B'}}
+*** ../vim-7.3.515/src/version.c	2012-04-30 21:09:38.000000000 +0200
+--- src/version.c	2012-05-18 12:04:54.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     516,
+  /**/
+
+-- 
+I used to wonder about the meaning of life.  But I looked it
+up in the dictionary under "L" and there it was - the meaning
+of life.  It was less than I expected.              - Dogbert
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.517 b/source/ap/vim/patches/7.3.517
new file mode 100644
index 00000000..343693ba
--- /dev/null
+++ b/source/ap/vim/patches/7.3.517
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.517
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.517
+Problem:    Crash when using "vipvv". (Alexandre Provencio)
+Solution:   Don't let the text length become negative.
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.516/src/ops.c	2012-04-20 13:46:02.000000000 +0200
+--- src/ops.c	2012-05-18 12:28:09.000000000 +0200
+***************
+*** 3042,3047 ****
+--- 3042,3049 ----
+  			}
+  #endif
+  		    }
++ 		    if (endcol == MAXCOL)
++ 			endcol = (colnr_T)STRLEN(p);
+  		    if (startcol > endcol
+  #ifdef FEAT_VIRTUALEDIT
+  			    || is_oneChar
+***************
+*** 3050,3057 ****
+  			bd.textlen = 0;
+  		    else
+  		    {
+- 			if (endcol == MAXCOL)
+- 			    endcol = (colnr_T)STRLEN(p);
+  			bd.textlen = endcol - startcol + oap->inclusive;
+  		    }
+  		    bd.textstart = p + startcol;
+--- 3052,3057 ----
+*** ../vim-7.3.516/src/version.c	2012-05-18 12:06:58.000000000 +0200
+--- src/version.c	2012-05-18 12:48:51.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     517,
+  /**/
+
+-- 
+BODY:        I'm not dead!
+CART DRIVER: 'Ere.  He says he's not dead.
+LARGE MAN:   Yes he is.
+BODY:        I'm not!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.518 b/source/ap/vim/patches/7.3.518
new file mode 100644
index 00000000..89429f0c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.518
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.518
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.518
+Problem:    When 'encoding' is a double-byte encoding ":helptags" may not find
+	    tags correctly.
+Solution:   Use vim_strbyte() instead of vim_strchr(). (Yasuhiro Matsumoto)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.517/src/ex_cmds.c	2012-04-25 17:32:14.000000000 +0200
+--- src/ex_cmds.c	2012-05-18 16:20:20.000000000 +0200
+***************
+*** 6535,6541 ****
+  	    p1 = vim_strchr(IObuff, '*');	/* find first '*' */
+  	    while (p1 != NULL)
+  	    {
+! 		p2 = vim_strchr(p1 + 1, '*');	/* find second '*' */
+  		if (p2 != NULL && p2 > p1 + 1)	/* skip "*" and "**" */
+  		{
+  		    for (s = p1 + 1; s < p2; ++s)
+--- 6535,6544 ----
+  	    p1 = vim_strchr(IObuff, '*');	/* find first '*' */
+  	    while (p1 != NULL)
+  	    {
+! 		/* Use vim_strbyte() instead of vim_strchr() so that when
+! 		 * 'encoding' is dbcs it still works, don't find '*' in the
+! 		 * second byte. */
+! 		p2 = vim_strbyte(p1 + 1, '*');	/* find second '*' */
+  		if (p2 != NULL && p2 > p1 + 1)	/* skip "*" and "**" */
+  		{
+  		    for (s = p1 + 1; s < p2; ++s)
+*** ../vim-7.3.517/src/version.c	2012-05-18 12:49:33.000000000 +0200
+--- src/version.c	2012-05-18 16:23:50.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     518,
+  /**/
+
+-- 
+If all you have is a hammer, everything looks like a nail.
+When your hammer is C++, everything begins to look like a thumb.
+			-- Steve Hoflich, comp.lang.c++
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.519 b/source/ap/vim/patches/7.3.519
new file mode 100644
index 00000000..846cea6b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.519
@@ -0,0 +1,64 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.519
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.519
+Problem:    When completefunction returns it cannot indicate end of completion
+	    mode.
+Solution:   Recognize completefunction returning -3.  (Mtsushita Shougo)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.518/src/edit.c	2012-04-30 18:18:43.000000000 +0200
+--- src/edit.c	2012-05-18 16:35:06.000000000 +0200
+***************
+*** 5205,5213 ****
+  	    }
+  
+  	    /* Return value -2 means the user complete function wants to
+! 	     * cancel the complete without an error. */
+  	    if (col == -2)
+  		return FAIL;
+  
+  	    /*
+  	     * Reset extended parameters of completion, when start new
+--- 5205,5221 ----
+  	    }
+  
+  	    /* Return value -2 means the user complete function wants to
+! 	     * cancel the complete without an error.
+! 	     * Return value -3 does the same as -2 and leaves CTRL-X mode.*/
+  	    if (col == -2)
+  		return FAIL;
++ 	    if (col == -3)
++ 	    {
++ 		ctrl_x_mode = 0;
++ 		edit_submode = NULL;
++ 		msg_clr_cmdline();
++ 		return FAIL;
++ 	    }
+  
+  	    /*
+  	     * Reset extended parameters of completion, when start new
+*** ../vim-7.3.518/src/version.c	2012-05-18 16:24:06.000000000 +0200
+--- src/version.c	2012-05-18 16:34:27.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     519,
+  /**/
+
+-- 
+Looking at Perl through Lisp glasses, Perl looks atrocious.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.520 b/source/ap/vim/patches/7.3.520
new file mode 100644
index 00000000..9e2da8d7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.520
@@ -0,0 +1,140 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.520
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.520
+Problem:    Gvim starts up slow on Unbuntu 12.04.
+Solution:   Move the call to gui_mch_init_check() to after fork(). (Yasuhiro
+	    Matsumoto)  Do check $DISPLAY being set.
+Files:	    src/gui.c, src/gui_gtk_x11.c, src/proto/gui_gtk_x11.pro
+
+
+*** ../vim-7.3.519/src/gui.c	2011-10-20 21:27:57.000000000 +0200
+--- src/gui.c	2012-05-18 16:53:14.000000000 +0200
+***************
+*** 270,275 ****
+--- 270,281 ----
+      }
+      /* Child */
+  
++ #ifdef FEAT_GUI_GTK
++     /* Call gtk_init_check() here after fork(). See gui_init_check(). */
++     if (gui_mch_init_check() != OK)
++ 	exit(1);
++ #endif
++ 
+  # if defined(HAVE_SETSID) || defined(HAVE_SETPGID)
+      /*
+       * Change our process group.  On some systems/shells a CTRL-C in the
+***************
+*** 430,436 ****
+--- 436,452 ----
+  #ifdef ALWAYS_USE_GUI
+      result = OK;
+  #else
++ # ifdef FEAT_GUI_GTK
++     /*
++      * Note: Don't call gtk_init_check() before fork, it will be called after
++      * the fork. When calling it before fork, it make vim hang for a while.
++      * See gui_do_fork().
++      * Use a simpler check if the GUI window can probably be opened.
++      */
++     result = gui.dofork ? gui_mch_early_init_check() : gui_mch_init_check();
++ # else
+      result = gui_mch_init_check();
++ # endif
+  #endif
+      return result;
+  }
+*** ../vim-7.3.519/src/gui_gtk_x11.c	2011-10-26 11:36:21.000000000 +0200
+--- src/gui_gtk_x11.c	2012-05-18 17:00:45.000000000 +0200
+***************
+*** 1414,1420 ****
+  }
+  
+  /*
+!  * Check if the GUI can be started.  Called before gvimrc is sourced.
+   * Return OK or FAIL.
+   */
+      int
+--- 1414,1442 ----
+  }
+  
+  /*
+!  * Check if the GUI can be started.  Called before gvimrc is sourced and
+!  * before fork().
+!  * Return OK or FAIL.
+!  */
+!     int
+! gui_mch_early_init_check(void)
+! {
+!     char_u *p;
+! 
+!     /* Guess that when $DISPLAY isn't set the GUI can't start. */
+!     p = mch_getenv((char_u *)"DISPLAY");
+!     if (p == NULL || *p == NUL)
+!     {
+! 	gui.dying = TRUE;
+! 	EMSG(_((char *)e_opendisp));
+! 	return FAIL;
+!     }
+!     return OK;
+! }
+! 
+! /*
+!  * Check if the GUI can be started.  Called before gvimrc is sourced but after
+!  * fork().
+   * Return OK or FAIL.
+   */
+      int
+***************
+*** 3050,3056 ****
+  
+      for (i = 0; i < (int)N_SELECTION_TARGETS; ++i)
+      {
+! 	/* OpenOffice tries to use TARGET_HTML and fails when it doesn't
+  	 * return something, instead of trying another target. Therefore only
+  	 * offer TARGET_HTML when it works. */
+  	if (!clip_html && selection_targets[i].info == TARGET_HTML)
+--- 3072,3078 ----
+  
+      for (i = 0; i < (int)N_SELECTION_TARGETS; ++i)
+      {
+! 	/* OpenOffice tries to use TARGET_HTML and fails when we don't
+  	 * return something, instead of trying another target. Therefore only
+  	 * offer TARGET_HTML when it works. */
+  	if (!clip_html && selection_targets[i].info == TARGET_HTML)
+*** ../vim-7.3.519/src/proto/gui_gtk_x11.pro	2011-08-10 17:44:41.000000000 +0200
+--- src/proto/gui_gtk_x11.pro	2012-05-18 16:54:28.000000000 +0200
+***************
+*** 4,9 ****
+--- 4,10 ----
+  void gui_mch_set_blinking __ARGS((long waittime, long on, long off));
+  void gui_mch_stop_blink __ARGS((void));
+  void gui_mch_start_blink __ARGS((void));
++ int gui_mch_early_init_check __ARGS((void));
+  int gui_mch_init_check __ARGS((void));
+  void gui_mch_show_tabline __ARGS((int showit));
+  int gui_mch_showing_tabline __ARGS((void));
+*** ../vim-7.3.519/src/version.c	2012-05-18 16:35:17.000000000 +0200
+--- src/version.c	2012-05-18 16:45:30.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     520,
+  /**/
+
+-- 
+Bad programs can be written in any language.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.521 b/source/ap/vim/patches/7.3.521
new file mode 100644
index 00000000..efe7122b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.521
@@ -0,0 +1,129 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.521
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.521
+Problem:    Using "z=" on a multi-byte character may cause a crash.
+Solution:   Don't use strlen() on an int pointer.
+Files:	    src/spell.c
+
+
+*** ../vim-7.3.520/src/spell.c	2012-01-10 22:26:12.000000000 +0100
+--- src/spell.c	2012-05-18 18:01:58.000000000 +0200
+***************
+*** 14494,14506 ****
+      int		p0 = -333;
+      int		c0;
+      int		did_white = FALSE;
+  
+      /*
+       * Convert the multi-byte string to a wide-character string.
+       * Remove accents, if wanted.  We actually remove all non-word characters.
+       * But keep white space.
+       */
+!     n = 0;
+      for (s = inword; *s != NUL; )
+      {
+  	t = s;
+--- 14494,14508 ----
+      int		p0 = -333;
+      int		c0;
+      int		did_white = FALSE;
++     int		wordlen;
++ 
+  
+      /*
+       * Convert the multi-byte string to a wide-character string.
+       * Remove accents, if wanted.  We actually remove all non-word characters.
+       * But keep white space.
+       */
+!     wordlen = 0;
+      for (s = inword; *s != NUL; )
+      {
+  	t = s;
+***************
+*** 14521,14532 ****
+  		    continue;
+  	    }
+  	}
+! 	word[n++] = c;
+      }
+!     word[n] = NUL;
+  
+      /*
+!      * This comes from Aspell phonet.cpp.
+       * Converted from C++ to C.  Added support for multi-byte chars.
+       * Changed to keep spaces.
+       */
+--- 14523,14534 ----
+  		    continue;
+  	    }
+  	}
+! 	word[wordlen++] = c;
+      }
+!     word[wordlen] = NUL;
+  
+      /*
+!      * This algorithm comes from Aspell phonet.cpp.
+       * Converted from C++ to C.  Added support for multi-byte chars.
+       * Changed to keep spaces.
+       */
+***************
+*** 14711,14717 ****
+  			    }
+  			if (k > k0)
+  			    mch_memmove(word + i + k0, word + i + k,
+! 				    sizeof(int) * (STRLEN(word + i + k) + 1));
+  
+  			/* new "actual letter" */
+  			c = word[i];
+--- 14713,14719 ----
+  			    }
+  			if (k > k0)
+  			    mch_memmove(word + i + k0, word + i + k,
+! 				    sizeof(int) * (wordlen - (i + k) + 1));
+  
+  			/* new "actual letter" */
+  			c = word[i];
+***************
+*** 14739,14745 ****
+  			    if (c != NUL)
+  				wres[reslen++] = c;
+  			    mch_memmove(word, word + i + 1,
+! 				    sizeof(int) * (STRLEN(word + i + 1) + 1));
+  			    i = 0;
+  			    z0 = 1;
+  			}
+--- 14741,14747 ----
+  			    if (c != NUL)
+  				wres[reslen++] = c;
+  			    mch_memmove(word, word + i + 1,
+! 				       sizeof(int) * (wordlen - (i + 1) + 1));
+  			    i = 0;
+  			    z0 = 1;
+  			}
+*** ../vim-7.3.520/src/version.c	2012-05-18 17:03:14.000000000 +0200
+--- src/version.c	2012-05-18 18:06:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     521,
+  /**/
+
+-- 
+OLD WOMAN: King of the WHO?
+ARTHUR:    The Britons.
+OLD WOMAN: Who are the Britons?
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.522 b/source/ap/vim/patches/7.3.522
new file mode 100644
index 00000000..2f4d17ce
--- /dev/null
+++ b/source/ap/vim/patches/7.3.522
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.522
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.522
+Problem:    Crash in vim_realloc() when using MEM_PROFILE.
+Solution:   Avoid using a NULL argument. (Dominique Pelle)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.521/src/eval.c	2012-05-18 12:06:58.000000000 +0200
+--- src/eval.c	2012-05-18 18:19:25.000000000 +0200
+***************
+*** 14643,14649 ****
+  		    long growmin  = (long)((p - start) * 2 + prevlen);
+  		    prevsize = grow50pc > growmin ? grow50pc : growmin;
+  		}
+! 		if ((newprev = vim_realloc(prev, prevsize)) == NULL)
+  		{
+  		    do_outofmem_msg((long_u)prevsize);
+  		    failed = TRUE;
+--- 14643,14651 ----
+  		    long growmin  = (long)((p - start) * 2 + prevlen);
+  		    prevsize = grow50pc > growmin ? grow50pc : growmin;
+  		}
+! 		newprev = prev == NULL ? alloc(prevsize)
+! 						: vim_realloc(prev, prevsize);
+! 		if (newprev == NULL)
+  		{
+  		    do_outofmem_msg((long_u)prevsize);
+  		    failed = TRUE;
+*** ../vim-7.3.521/src/version.c	2012-05-18 18:07:57.000000000 +0200
+--- src/version.c	2012-05-18 18:33:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     522,
+  /**/
+
+-- 
+ARTHUR:    ... and I am your king ....
+OLD WOMAN: Ooooh!  I didn't know we had a king.  I thought we were an
+           autonomous collective ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.523 b/source/ap/vim/patches/7.3.523
new file mode 100644
index 00000000..7eec3ea2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.523
@@ -0,0 +1,103 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.523
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.523
+Problem:    ":diffupdate" doesn't check for files changed elsewhere.
+Solution:   Add the ! flag. (Christian Brabandt)
+Files:	    runtime/doc/diff.txt, src/diff.c, src/ex_cmds.h
+
+
+*** ../vim-7.3.522/runtime/doc/diff.txt	2010-08-15 21:57:16.000000000 +0200
+--- runtime/doc/diff.txt	2012-05-18 18:41:49.000000000 +0200
+***************
+*** 178,184 ****
+  nodiff" before hiding it.
+  
+  							*:diffu* *:diffupdate*
+! :diffu[pdate]			Update the diff highlighting and folds.
+  
+  Vim attempts to keep the differences updated when you make changes to the
+  text.  This mostly takes care of inserted and deleted lines.  Changes within a
+--- 178,184 ----
+  nodiff" before hiding it.
+  
+  							*:diffu* *:diffupdate*
+! :diffu[pdate][!]		Update the diff highlighting and folds.
+  
+  Vim attempts to keep the differences updated when you make changes to the
+  text.  This mostly takes care of inserted and deleted lines.  Changes within a
+***************
+*** 187,192 ****
+--- 187,195 ----
+  
+  	:diffupdate
+  
++ If the ! is included Vim will check if the file was changed externally and
++ needs to be reloaded.  It will prompt for each changed file, like `:checktime`
++ was used.
+  
+  Vim will show filler lines for lines that are missing in one window but are
+  present in another.  These lines were inserted in another file or deleted in
+*** ../vim-7.3.522/src/diff.c	2010-09-21 16:56:29.000000000 +0200
+--- src/diff.c	2012-05-18 18:45:09.000000000 +0200
+***************
+*** 783,788 ****
+--- 783,797 ----
+  	goto theend;
+      }
+  
++     /* :diffupdate! */
++     if (eap != NULL && eap->forceit)
++ 	for (idx_new = idx_orig; idx_new < DB_COUNT; ++idx_new)
++ 	{
++ 	    buf = curtab->tp_diffbuf[idx_new];
++ 	    if (buf_valid(buf))
++ 		buf_check_timestamp(buf, FALSE);
++ 	}
++ 
+      /* Write the first buffer to a tempfile. */
+      buf = curtab->tp_diffbuf[idx_orig];
+      if (diff_write(buf, tmp_orig) == FAIL)
+*** ../vim-7.3.522/src/ex_cmds.h	2012-02-13 00:01:38.000000000 +0100
+--- src/ex_cmds.h	2012-05-18 18:37:56.000000000 +0200
+***************
+*** 304,310 ****
+  EX(CMD_display,		"display",	ex_display,
+  			EXTRA|NOTRLCOM|TRLBAR|SBOXOK|CMDWIN),
+  EX(CMD_diffupdate,	"diffupdate",	ex_diffupdate,
+! 			TRLBAR),
+  EX(CMD_diffget,		"diffget",	ex_diffgetput,
+  			RANGE|EXTRA|TRLBAR|MODIFY),
+  EX(CMD_diffoff,		"diffoff",	ex_diffoff,
+--- 304,310 ----
+  EX(CMD_display,		"display",	ex_display,
+  			EXTRA|NOTRLCOM|TRLBAR|SBOXOK|CMDWIN),
+  EX(CMD_diffupdate,	"diffupdate",	ex_diffupdate,
+! 			BANG|TRLBAR),
+  EX(CMD_diffget,		"diffget",	ex_diffgetput,
+  			RANGE|EXTRA|TRLBAR|MODIFY),
+  EX(CMD_diffoff,		"diffoff",	ex_diffoff,
+*** ../vim-7.3.522/src/version.c	2012-05-18 18:34:15.000000000 +0200
+--- src/version.c	2012-05-18 18:39:13.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     523
+  /**/
+
+-- 
+"The future's already arrived - it's just not evenly distributed yet."
+		-- William Gibson
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.524 b/source/ap/vim/patches/7.3.524
new file mode 100644
index 00000000..80d7baf6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.524
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.524
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.524 (after 7.3.523)
+Problem:    Missing comma.
+Solution:   Add the comma.
+Files:	    src/version.c
+
+
+*** ../vim-7.3.523/src/version.c	2012-05-18 18:47:11.000000000 +0200
+--- src/version.c	2012-05-18 21:52:26.000000000 +0200
+***************
+*** 715,721 ****
+  static int included_patches[] =
+  {   /* Add new patch number below this line */
+  /**/
+!     523
+  /**/
+      522,
+  /**/
+--- 715,723 ----
+  static int included_patches[] =
+  {   /* Add new patch number below this line */
+  /**/
+!     524,
+! /**/
+!     523,
+  /**/
+      522,
+  /**/
+
+-- 
+DENNIS: You can't expect to wield supreme executive power just 'cause some
+        watery tart threw a sword at you!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.525 b/source/ap/vim/patches/7.3.525
new file mode 100644
index 00000000..c9741cbf
--- /dev/null
+++ b/source/ap/vim/patches/7.3.525
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.525
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.525
+Problem:    Compiler warning on 64 bit MS-Windows.
+Solution:   Add type cast. (Mike Williams)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.524/src/ex_getln.c	2012-04-30 18:48:38.000000000 +0200
+--- src/ex_getln.c	2012-05-23 20:33:16.000000000 +0200
+***************
+*** 5263,5269 ****
+  {
+      static char_u compl[2] = { NUL, NUL };
+      char *short_names = ":=@>?/";
+!     int short_names_count = STRLEN(short_names);
+      int history_name_count = sizeof(history_names) / sizeof(char *) - 1;
+  
+      if (idx < short_names_count)
+--- 5263,5269 ----
+  {
+      static char_u compl[2] = { NUL, NUL };
+      char *short_names = ":=@>?/";
+!     int short_names_count = (int)STRLEN(short_names);
+      int history_name_count = sizeof(history_names) / sizeof(char *) - 1;
+  
+      if (idx < short_names_count)
+*** ../vim-7.3.524/src/version.c	2012-05-18 21:53:29.000000000 +0200
+--- src/version.c	2012-05-25 11:01:51.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     525,
+  /**/
+
+-- 
+For humans, honesty is a matter of degree.  Engineers are always honest in
+matters of technology and human relationships.  That's why it's a good idea
+to keep engineers away from customers, romantic interests, and other people
+who can't handle the truth.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.526 b/source/ap/vim/patches/7.3.526
new file mode 100644
index 00000000..036d401f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.526
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.526
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.526
+Problem:    Confusing indenting for #ifdef.
+Solution:   Remove and add indent. (Elias Diem)
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.525/src/normal.c	2012-04-30 18:18:43.000000000 +0200
+--- src/normal.c	2012-05-23 20:35:13.000000000 +0200
+***************
+*** 29,37 ****
+  static void	set_vcount_ca __ARGS((cmdarg_T *cap, int *set_prevcount));
+  #endif
+  static int
+! # ifdef __BORLANDC__
+! _RTLENTRYF
+! # endif
+  		nv_compare __ARGS((const void *s1, const void *s2));
+  static int	find_command __ARGS((int cmdchar));
+  static void	op_colon __ARGS((oparg_T *oap));
+--- 29,37 ----
+  static void	set_vcount_ca __ARGS((cmdarg_T *cap, int *set_prevcount));
+  #endif
+  static int
+! #ifdef __BORLANDC__
+!     _RTLENTRYF
+! #endif
+  		nv_compare __ARGS((const void *s1, const void *s2));
+  static int	find_command __ARGS((int cmdchar));
+  static void	op_colon __ARGS((oparg_T *oap));
+*** ../vim-7.3.525/src/version.c	2012-05-25 11:02:34.000000000 +0200
+--- src/version.c	2012-05-25 11:03:37.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     526,
+  /**/
+
+-- 
+While it's true that many normal people whould prefer not to _date_ an
+engineer, most normal people harbor an intense desire to _mate_ with them,
+thus producing engineerlike children who will have high-paying jobs long
+before losing their virginity.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.527 b/source/ap/vim/patches/7.3.527
new file mode 100644
index 00000000..0c6af2b0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.527
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.527
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=latin1
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.527
+Problem:    Clang complains about non-ASCII characters in a string.
+Solution:   Change to \x88 form. (Dominique Pelle)
+Files:	    src/charset.c
+
+
+*** ../vim-7.3.526/src/charset.c	2012-01-26 13:40:04.000000000 +0100
+--- src/charset.c	2012-05-25 11:49:58.000000000 +0200
+***************
+*** 1602,1611 ****
+  #define LATIN1LOWER 'l'
+  #define LATIN1UPPER 'U'
+  
+- /*                                                                 !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]%_'abcdefghijklmnopqrstuvwxyz{|}~                                  ¡¢£¤¥¦§¨©ª«¬­®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ */
+  static char_u latin1flags[257] = "                                                                 UUUUUUUUUUUUUUUUUUUUUUUUUU      llllllllllllllllllllllllll                                                                     UUUUUUUUUUUUUUUUUUUUUUU UUUUUUUllllllllllllllllllllllll llllllll";
+! static char_u latin1upper[257] = "                                 !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~€�‚ƒ„…†‡ˆ‰Š‹Œ�Ž��‘’“”•–—˜™š›œ�žŸ ¡¢£¤¥¦§¨©ª«¬­®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ÷ØÙÚÛÜÝÞÿ";
+! static char_u latin1lower[257] = "                                 !\"#$%&'()*+,-./0123456789:;<=>?@abcdefghijklmnopqrstuvwxyz[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~€�‚ƒ„…†‡ˆ‰Š‹Œ�Ž��‘’“”•–—˜™š›œ�žŸ ¡¢£¤¥¦§¨©ª«¬­®¯°±²³´µ¶·¸¹º»¼½¾¿àáâãäåæçèéêëìíîïðñòóôõö×øùúûüýþßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ";
+  
+      int
+  vim_islower(c)
+--- 1602,1610 ----
+  #define LATIN1LOWER 'l'
+  #define LATIN1UPPER 'U'
+  
+  static char_u latin1flags[257] = "                                                                 UUUUUUUUUUUUUUUUUUUUUUUUUU      llllllllllllllllllllllllll                                                                     UUUUUUUUUUUUUUUUUUUUUUU UUUUUUUllllllllllllllllllllllll llllllll";
+! static char_u latin1upper[257] = "                                 !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xf7\xd8\xd9\xda\xdb\xdc\xdd\xde\xff";
+! static char_u latin1lower[257] = "                                 !\"#$%&'()*+,-./0123456789:;<=>?@abcdefghijklmnopqrstuvwxyz[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xd7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xdf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff";
+  
+      int
+  vim_islower(c)
+*** ../vim-7.3.526/src/version.c	2012-05-25 11:04:34.000000000 +0200
+--- src/version.c	2012-05-25 11:52:06.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     527,
+  /**/
+
+-- 
+An alien life briefly visits earth.  Just before departing it leaves a
+message in the dust on the back of a white van.  The world is shocked
+and wants to know what it means.  After months of studies the worlds
+best linguistic scientists are able to decipher the message: "Wash me!".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.528 b/source/ap/vim/patches/7.3.528
new file mode 100644
index 00000000..41084ad4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.528
@@ -0,0 +1,171 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.528
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.528
+Problem:    Crash when closing last window in a tab. (Alex Efros)
+Solution:   Use common code in close_last_window_tabpage(). (Christian
+	    Brabandt)
+Files:	    src/window.c
+
+
+*** ../vim-7.3.527/src/window.c	2012-03-16 19:07:54.000000000 +0100
+--- src/window.c	2012-05-25 12:25:16.000000000 +0200
+***************
+*** 23,28 ****
+--- 23,29 ----
+  static void win_totop __ARGS((int size, int flags));
+  static void win_equal_rec __ARGS((win_T *next_curwin, int current, frame_T *topfr, int dir, int col, int row, int width, int height));
+  static int last_window __ARGS((void));
++ static int close_last_window_tabpage __ARGS((win_T *win, int free_buf, tabpage_T *prev_curtab));
+  static win_T *win_free_mem __ARGS((win_T *win, int *dirp, tabpage_T *tp));
+  static frame_T *win_altframe __ARGS((win_T *win, tabpage_T *tp));
+  static tabpage_T *alt_tabpage __ARGS((void));
+***************
+*** 2105,2110 ****
+--- 2106,2147 ----
+  }
+  
+  /*
++  * Close the possibly last window in a tab page.
++  * Returns TRUE when the window was closed already.
++  */
++     static int
++ close_last_window_tabpage(win, free_buf, prev_curtab)
++     win_T	*win;
++     int		free_buf;
++     tabpage_T   *prev_curtab;
++ {
++     if (firstwin == lastwin)
++     {
++ 	/*
++ 	 * Closing the last window in a tab page.  First go to another tab
++ 	 * page and then close the window and the tab page.  This avoids that
++ 	 * curwin and curtab are invalid while we are freeing memory, they may
++ 	 * be used in GUI events.
++ 	 */
++ 	goto_tabpage_tp(alt_tabpage());
++ 	redraw_tabline = TRUE;
++ 
++ 	/* Safety check: Autocommands may have closed the window when jumping
++ 	 * to the other tab page. */
++ 	if (valid_tabpage(prev_curtab) && prev_curtab->tp_firstwin == win)
++ 	{
++ 	    int	    h = tabline_height();
++ 
++ 	    win_close_othertab(win, free_buf, prev_curtab);
++ 	    if (h != tabline_height())
++ 		shell_new_rows();
++ 	}
++ 	return TRUE;
++     }
++     return FALSE;
++ }
++ 
++ /*
+   * Close window "win".  Only works for the current tab page.
+   * If "free_buf" is TRUE related buffer may be unloaded.
+   *
+***************
+*** 2143,2171 ****
+      }
+  #endif
+  
+!     /*
+!      * When closing the last window in a tab page first go to another tab
+!      * page and then close the window and the tab page.  This avoids that
+!      * curwin and curtab are not invalid while we are freeing memory, they may
+!      * be used in GUI events.
+!      */
+!     if (firstwin == lastwin)
+!     {
+! 	goto_tabpage_tp(alt_tabpage());
+! 	redraw_tabline = TRUE;
+! 
+! 	/* Safety check: Autocommands may have closed the window when jumping
+! 	 * to the other tab page. */
+! 	if (valid_tabpage(prev_curtab) && prev_curtab->tp_firstwin == win)
+! 	{
+! 	    int	    h = tabline_height();
+! 
+! 	    win_close_othertab(win, free_buf, prev_curtab);
+! 	    if (h != tabline_height())
+! 		shell_new_rows();
+! 	}
+! 	return;
+!     }
+  
+      /* When closing the help window, try restoring a snapshot after closing
+       * the window.  Otherwise clear the snapshot, it's now invalid. */
+--- 2180,2190 ----
+      }
+  #endif
+  
+!     /* When closing the last window in a tab page first go to another tab page
+!      * and then close the window and the tab page to avoid that curwin and
+!      * curtab are invalid while we are freeing memory. */
+!     if (close_last_window_tabpage(win, free_buf, prev_curtab))
+!       return;
+  
+      /* When closing the help window, try restoring a snapshot after closing
+       * the window.  Otherwise clear the snapshot, it's now invalid. */
+***************
+*** 2225,2231 ****
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+!     if (!win_valid(win) || last_window() || curtab != prev_curtab)
+  	return;
+  
+      /* Free the memory used for the window and get the window that received
+--- 2244,2251 ----
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+!     if (!win_valid(win) || last_window() || curtab != prev_curtab
+! 	    || close_last_window_tabpage(win, free_buf, prev_curtab))
+  	return;
+  
+      /* Free the memory used for the window and get the window that received
+***************
+*** 2310,2316 ****
+  
+  /*
+   * Close window "win" in tab page "tp", which is not the current tab page.
+!  * This may be the last window ih that tab page and result in closing the tab,
+   * thus "tp" may become invalid!
+   * Caller must check if buffer is hidden and whether the tabline needs to be
+   * updated.
+--- 2330,2336 ----
+  
+  /*
+   * Close window "win" in tab page "tp", which is not the current tab page.
+!  * This may be the last window in that tab page and result in closing the tab,
+   * thus "tp" may become invalid!
+   * Caller must check if buffer is hidden and whether the tabline needs to be
+   * updated.
+*** ../vim-7.3.527/src/version.c	2012-05-25 11:56:06.000000000 +0200
+--- src/version.c	2012-05-25 12:38:25.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     528,
+  /**/
+
+-- 
+For society, it's probably a good thing that engineers value function over
+appearance.  For example, you wouldn't want engineers to build nuclear power
+plants that only _look_ like they would keep all the radiation inside.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.529 b/source/ap/vim/patches/7.3.529
new file mode 100644
index 00000000..386baf1f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.529
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.529
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.529
+Problem:    Using a count before "v" and "V" does not work (Kikyous)
+Solution:   Make the count select that many characters or lines. (Christian
+	    Brabandt)
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.528/src/normal.c	2012-05-25 11:04:34.000000000 +0200
+--- src/normal.c	2012-05-25 13:12:06.000000000 +0200
+***************
+*** 7660,7672 ****
+      else		    /* start Visual mode */
+      {
+  	check_visual_highlight();
+! 	if (cap->count0)		    /* use previously selected part */
+  	{
+! 	    if (resel_VIsual_mode == NUL)   /* there is none */
+! 	    {
+! 		beep_flush();
+! 		return;
+! 	    }
+  	    VIsual = curwin->w_cursor;
+  
+  	    VIsual_active = TRUE;
+--- 7660,7668 ----
+      else		    /* start Visual mode */
+      {
+  	check_visual_highlight();
+! 	if (cap->count0 > 0 && resel_VIsual_mode != NUL)
+  	{
+! 	    /* use previously selected part */
+  	    VIsual = curwin->w_cursor;
+  
+  	    VIsual_active = TRUE;
+***************
+*** 7725,7730 ****
+--- 7721,7736 ----
+  		/* start Select mode when 'selectmode' contains "cmd" */
+  		may_start_select('c');
+  	    n_start_visual_mode(cap->cmdchar);
++ 	    if (VIsual_mode != 'V' && *p_sel == 'e')
++ 		++cap->count1;  /* include one more char */
++ 	    if (cap->count0 > 0 && --cap->count1 > 0)
++ 	    {
++ 		/* With a count select that many characters or lines. */
++ 		if (VIsual_mode == 'v' || VIsual_mode == Ctrl_V)
++ 		    nv_right(cap);
++ 		else if (VIsual_mode == 'V')
++ 		    nv_down(cap);
++ 	    }
+  	}
+      }
+  }
+*** ../vim-7.3.528/src/version.c	2012-05-25 12:38:57.000000000 +0200
+--- src/version.c	2012-05-25 12:59:58.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     529,
+  /**/
+
+-- 
+Normal people believe that if it ain't broke, don't fix it.  Engineers believe
+that if it ain't broke, it doesn't have enough features yet.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.530 b/source/ap/vim/patches/7.3.530
new file mode 100644
index 00000000..216117ca
--- /dev/null
+++ b/source/ap/vim/patches/7.3.530
@@ -0,0 +1,50 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.530
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.530 (after 7.3.520)
+Problem:    Gvim does not work when 'guioptions' includes "f". (Davido)
+Solution:   Call gui_mch_init_check() when running GUI in the foreground.
+	    (Yasuhiro Matsumoto)
+Files:	    src/gui.c
+
+
+*** ../vim-7.3.529/src/gui.c	2012-05-18 17:03:13.000000000 +0200
+--- src/gui.c	2012-05-25 14:01:26.000000000 +0200
+***************
+*** 102,107 ****
+--- 102,111 ----
+      else
+  #endif
+      {
++ 	/* If there is 'f' in 'guioptions' and specify -g argument,
++ 	 * gui_mch_init_check() was not called yet.  */
++ 	if (gui_mch_init_check() != OK)
++ 	    exit(1);
+  	gui_attempt_start();
+      }
+  
+*** ../vim-7.3.529/src/version.c	2012-05-25 13:12:33.000000000 +0200
+--- src/version.c	2012-05-25 14:05:46.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     530,
+  /**/
+
+-- 
+I think that you'll agree that engineers are very effective in their social
+interactions.  It's the "normal" people who are nuts.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.531 b/source/ap/vim/patches/7.3.531
new file mode 100644
index 00000000..652bdb73
--- /dev/null
+++ b/source/ap/vim/patches/7.3.531
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.531
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.531 (after 7.3.530)
+Problem:    GUI does not work on MS-Windows.
+Solution:   Add the missing #ifdef. (Patrick Avery)
+Files:	    src/gui.c
+
+
+*** ../vim-7.3.530/src/gui.c	2012-05-25 14:06:18.000000000 +0200
+--- src/gui.c	2012-05-27 00:34:51.000000000 +0200
+***************
+*** 102,111 ****
+--- 102,113 ----
+      else
+  #endif
+      {
++ #ifdef FEAT_GUI_GTK
+  	/* If there is 'f' in 'guioptions' and specify -g argument,
+  	 * gui_mch_init_check() was not called yet.  */
+  	if (gui_mch_init_check() != OK)
+  	    exit(1);
++ #endif
+  	gui_attempt_start();
+      }
+  
+*** ../vim-7.3.530/src/version.c	2012-05-25 14:06:18.000000000 +0200
+--- src/version.c	2012-05-27 00:37:33.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     531,
+  /**/
+
+-- 
+I learned the customs and mannerisms of engineers by observing them, much the
+way Jane Goodall learned about the great apes, but without the hassle of
+grooming.
+				(Scott Adams - The Dilbert principle)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.532 b/source/ap/vim/patches/7.3.532
new file mode 100644
index 00000000..071cab34
--- /dev/null
+++ b/source/ap/vim/patches/7.3.532
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.532
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.532
+Problem:    Compiler warning from Clang.
+Solution:   Use a different way to point inside a string. (Dominique Pelle)
+Files:	    src/syntax.c
+
+
+*** ../vim-7.3.531/src/syntax.c	2012-03-23 16:25:13.000000000 +0100
+--- src/syntax.c	2012-06-01 13:13:58.000000000 +0200
+***************
+*** 9476,9482 ****
+      int	    cnt;
+      int	    attr;
+  {
+!     msg_puts_attr((char_u *)("N \bI \b!  \b" + cnt / 11), attr);
+      msg_clr_eos();
+      out_flush();
+      ui_delay(cnt == 99 ? 40L : (long)cnt * 50L, FALSE);
+--- 9476,9482 ----
+      int	    cnt;
+      int	    attr;
+  {
+!     msg_puts_attr((char_u *)&("N \bI \b!  \b"[cnt / 11]), attr);
+      msg_clr_eos();
+      out_flush();
+      ui_delay(cnt == 99 ? 40L : (long)cnt * 50L, FALSE);
+*** ../vim-7.3.531/src/version.c	2012-05-27 00:37:45.000000000 +0200
+--- src/version.c	2012-06-01 13:14:51.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     532,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+8. You spend half of the plane trip with your laptop on your lap...and your
+   child in the overhead compartment.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.533 b/source/ap/vim/patches/7.3.533
new file mode 100644
index 00000000..1d71c8d1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.533
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.533
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.533
+Problem:    Memory leak when writing undo file.
+Solution:   Free the ACL. (Dominique Pelle)
+Files:	    src/undo.c
+
+
+*** ../vim-7.3.532/src/undo.c	2011-12-08 15:14:04.000000000 +0100
+--- src/undo.c	2012-06-01 13:38:42.000000000 +0200
+***************
+*** 1535,1540 ****
+--- 1535,1541 ----
+  	/* For systems that support ACL: get the ACL from the original file. */
+  	acl = mch_get_acl(buf->b_ffname);
+  	mch_set_acl(file_name, acl);
++ 	mch_free_acl(acl);
+      }
+  #endif
+  
+*** ../vim-7.3.532/src/version.c	2012-06-01 13:18:48.000000000 +0200
+--- src/version.c	2012-06-01 13:39:16.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     533,
+  /**/
+
+-- 
+"How is your new girlfriend?"
+"90-60-90 man!"
+"What, pale purple?"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.534 b/source/ap/vim/patches/7.3.534
new file mode 100644
index 00000000..618d6e4e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.534
@@ -0,0 +1,101 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.534
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.534 (after 7.3.461)
+Problem:    When using an InsertCharPre autocommand autoindent fails.
+Solution:   Proper handling of v:char. (Alexey Radkov)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.533/src/edit.c	2012-05-18 16:35:17.000000000 +0200
+--- src/edit.c	2012-06-01 14:41:06.000000000 +0200
+***************
+*** 10108,10129 ****
+  do_insert_char_pre(c)
+      int c;
+  {
+!     char_u *res;
+  
+      /* Return quickly when there is nothing to do. */
+      if (!has_insertcharpre())
+  	return NULL;
+  
+      /* Lock the text to avoid weird things from happening. */
+      ++textlock;
+!     set_vim_var_char(c);  /* set v:char */
+  
+      if (apply_autocmds(EVENT_INSERTCHARPRE, NULL, NULL, FALSE, curbuf))
+! 	/* Get the new value of v:char.  It may be empty or more than one
+! 	 * character. */
+! 	res = vim_strsave(get_vim_var_str(VV_CHAR));
+!     else
+! 	res = NULL;
+  
+      set_vim_var_string(VV_CHAR, NULL, -1);  /* clear v:char */
+      --textlock;
+--- 10108,10147 ----
+  do_insert_char_pre(c)
+      int c;
+  {
+!     char_u	*res;
+! #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES + 1];
+! #else
+!     char_u	buf[2];
+! #endif
+  
+      /* Return quickly when there is nothing to do. */
+      if (!has_insertcharpre())
+  	return NULL;
+  
++ #ifdef FEAT_MBYTE
++     if (has_mbyte)
++ 	buf[(*mb_char2bytes)(c, buf)] = NUL;
++     else
++ #endif
++     {
++ 	buf[0] = c;
++ 	buf[1] = NUL;
++     }
++ 
+      /* Lock the text to avoid weird things from happening. */
+      ++textlock;
+!     set_vim_var_string(VV_CHAR, buf, -1);  /* set v:char */
+  
++     res = NULL;
+      if (apply_autocmds(EVENT_INSERTCHARPRE, NULL, NULL, FALSE, curbuf))
+!     {
+! 	/* Get the value of v:char.  It may be empty or more than one
+! 	 * character.  Only use it when changed, otherwise continue with the
+! 	 * original character to avoid breaking autoindent. */
+! 	if (STRCMP(buf, get_vim_var_str(VV_CHAR)) != 0)
+! 	    res = vim_strsave(get_vim_var_str(VV_CHAR));
+!     }
+  
+      set_vim_var_string(VV_CHAR, NULL, -1);  /* clear v:char */
+      --textlock;
+*** ../vim-7.3.533/src/version.c	2012-06-01 13:46:06.000000000 +0200
+--- src/version.c	2012-06-01 14:42:19.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     534,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+11. You find yourself typing "com" after every period when using a word
+    processor.com
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.535 b/source/ap/vim/patches/7.3.535
new file mode 100644
index 00000000..e7f0f8a9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.535
@@ -0,0 +1,356 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.535
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.535
+Problem:    Many #ifdefs for MB_MAXBYTES.
+Solution:   Also define MB_MAXBYTES without the +multi_byte feature.  Fix
+	    places where the buffer didn't include space for a NUL byte.
+Files:	    src/arabic.c, src/edit.c, src/eval.c, src/getchar.c, src/mbyte.c,
+	    src/misc1.c, src/screen.c, src/spell.c, src/vim.h
+
+
+*** ../vim-7.3.534/src/arabic.c	2010-08-15 21:57:28.000000000 +0200
+--- src/arabic.c	2012-06-01 14:59:37.000000000 +0200
+***************
+*** 1066,1072 ****
+  
+      if (curr_c != c && ccp != NULL)
+      {
+! 	char_u buf[MB_MAXBYTES];
+  
+  	/* Update the first byte of the character. */
+  	(*mb_char2bytes)(curr_c, buf);
+--- 1066,1072 ----
+  
+      if (curr_c != c && ccp != NULL)
+      {
+! 	char_u buf[MB_MAXBYTES + 1];
+  
+  	/* Update the first byte of the character. */
+  	(*mb_char2bytes)(curr_c, buf);
+*** ../vim-7.3.534/src/edit.c	2012-06-01 14:57:47.000000000 +0200
+--- src/edit.c	2012-06-01 15:01:49.000000000 +0200
+***************
+*** 1648,1658 ****
+  #define PC_STATUS_RIGHT	1	/* right halve of double-wide char */
+  #define PC_STATUS_LEFT	2	/* left halve of double-wide char */
+  #define PC_STATUS_SET	3	/* pc_bytes was filled */
+- #ifdef FEAT_MBYTE
+  static char_u pc_bytes[MB_MAXBYTES + 1]; /* saved bytes */
+- #else
+- static char_u pc_bytes[2];		/* saved bytes */
+- #endif
+  static int  pc_attr;
+  static int  pc_row;
+  static int  pc_col;
+--- 1648,1654 ----
+***************
+*** 6819,6829 ****
+      char_u	*s;
+  
+      vim_free(last_insert);
+- #ifdef FEAT_MBYTE
+      last_insert = alloc(MB_MAXBYTES * 3 + 5);
+- #else
+-     last_insert = alloc(6);
+- #endif
+      if (last_insert != NULL)
+      {
+  	s = last_insert;
+--- 6815,6821 ----
+***************
+*** 6861,6867 ****
+      char_u	*s;
+  {
+  #ifdef FEAT_MBYTE
+!     char_u	temp[MB_MAXBYTES];
+      int		i;
+      int		len;
+  
+--- 6853,6859 ----
+      char_u	*s;
+  {
+  #ifdef FEAT_MBYTE
+!     char_u	temp[MB_MAXBYTES + 1];
+      int		i;
+      int		len;
+  
+***************
+*** 7423,7429 ****
+      int		cc;
+  {
+      int		n;
+!     char_u	buf[MB_MAXBYTES];
+      int		i;
+      int		c;
+  
+--- 7415,7421 ----
+      int		cc;
+  {
+      int		n;
+!     char_u	buf[MB_MAXBYTES + 1];
+      int		i;
+      int		c;
+  
+***************
+*** 10109,10119 ****
+      int c;
+  {
+      char_u	*res;
+- #ifdef FEAT_MBYTE
+      char_u	buf[MB_MAXBYTES + 1];
+- #else
+-     char_u	buf[2];
+- #endif
+  
+      /* Return quickly when there is nothing to do. */
+      if (!has_insertcharpre())
+--- 10101,10107 ----
+*** ../vim-7.3.534/src/eval.c	2012-05-18 18:34:15.000000000 +0200
+--- src/eval.c	2012-06-01 15:02:08.000000000 +0200
+***************
+*** 19170,19180 ****
+  set_vim_var_char(c)
+      int c;
+  {
+! #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES];
+! #else
+!     char_u	buf[2];
+! #endif
+  
+  #ifdef FEAT_MBYTE
+      if (has_mbyte)
+--- 19170,19176 ----
+  set_vim_var_char(c)
+      int c;
+  {
+!     char_u	buf[MB_MAXBYTES + 1];
+  
+  #ifdef FEAT_MBYTE
+      if (has_mbyte)
+*** ../vim-7.3.534/src/getchar.c	2012-04-05 16:07:01.000000000 +0200
+--- src/getchar.c	2012-06-01 15:03:51.000000000 +0200
+***************
+*** 723,729 ****
+      int				c;
+  #ifdef FEAT_MBYTE
+      int				n;
+!     char_u			buf[MB_MAXBYTES];
+      int				i;
+  #endif
+  
+--- 723,729 ----
+      int				c;
+  #ifdef FEAT_MBYTE
+      int				n;
+!     char_u			buf[MB_MAXBYTES + 1];
+      int				i;
+  #endif
+  
+***************
+*** 1072,1078 ****
+      int	    c;
+  {
+  #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES];
+  #else
+      char_u	buf[4];
+  #endif
+--- 1072,1078 ----
+      int	    c;
+  {
+  #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES + 1];
+  #else
+      char_u	buf[4];
+  #endif
+***************
+*** 1547,1553 ****
+      int		c, c2;
+  #ifdef FEAT_MBYTE
+      int		n;
+!     char_u	buf[MB_MAXBYTES];
+      int		i;
+  #endif
+  
+--- 1547,1553 ----
+      int		c, c2;
+  #ifdef FEAT_MBYTE
+      int		n;
+!     char_u	buf[MB_MAXBYTES + 1];
+      int		i;
+  #endif
+  
+***************
+*** 4335,4345 ****
+      int		scol;		/* starting column of the abbr. */
+      int		j;
+      char_u	*s;
+- #ifdef FEAT_MBYTE
+      char_u	tb[MB_MAXBYTES + 4];
+- #else
+-     char_u	tb[4];
+- #endif
+      mapblock_T	*mp;
+  #ifdef FEAT_LOCALMAP
+      mapblock_T	*mp2;
+--- 4335,4341 ----
+*** ../vim-7.3.534/src/mbyte.c	2012-03-07 19:38:52.000000000 +0100
+--- src/mbyte.c	2012-06-01 15:04:27.000000000 +0200
+***************
+*** 708,714 ****
+  	     */
+  	    n = (i & 0x80) ? 2 : 1;
+  # else
+! 	    char buf[MB_MAXBYTES];
+  # ifdef X_LOCALE
+  #  ifndef mblen
+  #   define mblen _Xmblen
+--- 708,714 ----
+  	     */
+  	    n = (i & 0x80) ? 2 : 1;
+  # else
+! 	    char buf[MB_MAXBYTES + 1];
+  # ifdef X_LOCALE
+  #  ifndef mblen
+  #   define mblen _Xmblen
+***************
+*** 1953,1959 ****
+  /*
+   * Convert the character at screen position "off" to a sequence of bytes.
+   * Includes the composing characters.
+!  * "buf" must at least have the length MB_MAXBYTES.
+   * Only to be used when ScreenLinesUC[off] != 0.
+   * Returns the produced number of bytes.
+   */
+--- 1953,1959 ----
+  /*
+   * Convert the character at screen position "off" to a sequence of bytes.
+   * Includes the composing characters.
+!  * "buf" must at least have the length MB_MAXBYTES + 1.
+   * Only to be used when ScreenLinesUC[off] != 0.
+   * Returns the produced number of bytes.
+   */
+*** ../vim-7.3.534/src/misc1.c	2012-04-30 21:09:38.000000000 +0200
+--- src/misc1.c	2012-06-01 15:04:56.000000000 +0200
+***************
+*** 1932,1938 ****
+      int		c;
+  {
+  #if defined(FEAT_MBYTE) || defined(PROTO)
+!     char_u	buf[MB_MAXBYTES];
+      int		n;
+  
+      n = (*mb_char2bytes)(c, buf);
+--- 1932,1938 ----
+      int		c;
+  {
+  #if defined(FEAT_MBYTE) || defined(PROTO)
+!     char_u	buf[MB_MAXBYTES + 1];
+      int		n;
+  
+      n = (*mb_char2bytes)(c, buf);
+*** ../vim-7.3.534/src/screen.c	2012-03-23 16:25:13.000000000 +0100
+--- src/screen.c	2012-06-01 15:06:03.000000000 +0200
+***************
+*** 6621,6636 ****
+      int	    row, col;
+      int	    attr;
+  {
+- #ifdef FEAT_MBYTE
+      char_u	buf[MB_MAXBYTES + 1];
+  
+!     buf[(*mb_char2bytes)(c, buf)] = NUL;
+! #else
+!     char_u	buf[2];
+! 
+!     buf[0] = c;
+!     buf[1] = NUL;
+  #endif
+      screen_puts(buf, row, col, attr);
+  }
+  
+--- 6621,6637 ----
+      int	    row, col;
+      int	    attr;
+  {
+      char_u	buf[MB_MAXBYTES + 1];
+  
+! #ifdef FEAT_MBYTE
+!     if (has_mbyte)
+! 	buf[(*mb_char2bytes)(c, buf)] = NUL;
+!     else
+  #endif
++     {
++ 	buf[0] = c;
++ 	buf[1] = NUL;
++     }
+      screen_puts(buf, row, col, attr);
+  }
+  
+*** ../vim-7.3.534/src/spell.c	2012-05-18 18:07:57.000000000 +0200
+--- src/spell.c	2012-06-01 15:06:30.000000000 +0200
+***************
+*** 13694,13700 ****
+  {
+      int		m1, m2;
+  #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES];
+      hashitem_T  *hi;
+  
+      if (c1 >= 256)
+--- 13694,13700 ----
+  {
+      int		m1, m2;
+  #ifdef FEAT_MBYTE
+!     char_u	buf[MB_MAXBYTES + 1];
+      hashitem_T  *hi;
+  
+      if (c1 >= 256)
+*** ../vim-7.3.534/src/vim.h	2012-04-30 18:48:38.000000000 +0200
+--- src/vim.h	2012-06-01 14:59:28.000000000 +0200
+***************
+*** 1703,1708 ****
+--- 1703,1710 ----
+   * character of up to 6 bytes, or one 16-bit character of up to three bytes
+   * plus six following composing characters of three bytes each. */
+  # define MB_MAXBYTES	21
++ #else
++ # define MB_MAXBYTES	1
+  #endif
+  
+  #if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO)
+***************
+*** 2017,2022 ****
+--- 2019,2025 ----
+   #pragma warning(disable : 4312)
+  #endif
+  
++ /* Note: a NULL argument for vim_realloc() is not portable, don't use it. */
+  #if defined(MEM_PROFILE)
+  # define vim_realloc(ptr, size)  mem_realloc((ptr), (size))
+  #else
+*** ../vim-7.3.534/src/version.c	2012-06-01 14:57:47.000000000 +0200
+--- src/version.c	2012-06-01 15:08:20.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     535,
+  /**/
+
+-- 
+Me?  A skeptic?  I trust you have proof.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.536 b/source/ap/vim/patches/7.3.536
new file mode 100644
index 00000000..e0c3f760
--- /dev/null
+++ b/source/ap/vim/patches/7.3.536
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.536
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.536
+Problem:    When spell checking the German sharp s is not seen as a word
+	    character. (Aexl Bender)
+Solution:   In utf_islower() return true for the sharp s. Note: also need
+	    updated spell file for this to take effect.
+Files:	    src/mbyte.c
+
+
+*** ../vim-7.3.535/src/mbyte.c	2012-06-01 15:20:49.000000000 +0200
+--- src/mbyte.c	2012-06-01 16:50:41.000000000 +0200
+***************
+*** 2949,2955 ****
+  {
+  	{0x61,0x7a,1,-32},
+  	{0xb5,0xb5,-1,743},
+! 	{0xe0,0xf6,1,-32},
+  	{0xf8,0xfe,1,-32},
+  	{0xff,0xff,-1,121},
+  	{0x101,0x12f,2,-1},
+--- 2949,2955 ----
+  {
+  	{0x61,0x7a,1,-32},
+  	{0xb5,0xb5,-1,743},
+! 	{0xe0,0xf6,1,-32},  /* 0xdf (German sharp s) is not upper-cased */
+  	{0xf8,0xfe,1,-32},
+  	{0xff,0xff,-1,121},
+  	{0x101,0x12f,2,-1},
+***************
+*** 3129,3135 ****
+  utf_islower(a)
+      int		a;
+  {
+!     return (utf_toupper(a) != a);
+  }
+  
+  /*
+--- 3129,3136 ----
+  utf_islower(a)
+      int		a;
+  {
+!     /* German sharp s is lower case but has no upper case equivalent. */
+!     return (utf_toupper(a) != a) || a == 0xdf;
+  }
+  
+  /*
+*** ../vim-7.3.535/src/version.c	2012-06-01 15:20:49.000000000 +0200
+--- src/version.c	2012-06-01 17:45:17.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     536,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+16. You step out of your room and realize that your parents have moved and
+    you don't have a clue when it happened.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.537 b/source/ap/vim/patches/7.3.537
new file mode 100644
index 00000000..76b41c8a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.537
@@ -0,0 +1,47 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.537
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.537
+Problem:    Unecessary call to init_spell_chartab().
+Solution:   Delete the call.
+Files:	    src/spell.c
+
+
+*** ../vim-7.3.536/src/spell.c	2012-06-01 15:20:49.000000000 +0200
+--- src/spell.c	2012-06-01 17:49:44.000000000 +0200
+***************
+*** 4721,4728 ****
+  	int_wordlist = NULL;
+      }
+  
+-     init_spell_chartab();
+- 
+      vim_free(repl_to);
+      repl_to = NULL;
+      vim_free(repl_from);
+--- 4721,4726 ----
+*** ../vim-7.3.536/src/version.c	2012-06-01 17:46:52.000000000 +0200
+--- src/version.c	2012-06-01 17:49:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     537,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+17. You turn on your intercom when leaving the room so you can hear if new
+    e-mail arrives.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.538 b/source/ap/vim/patches/7.3.538
new file mode 100644
index 00000000..947fa65b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.538
@@ -0,0 +1,321 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.538
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.538
+Problem:    'efm' does not handle Tabs in pointer lines.
+Solution:   Add Tab support. Improve tests. (Lech Lorens)
+Files:	    src/quickfix.c, src/testdir/test10.in, src/testdir/test10.ok
+
+
+*** ../vim-7.3.537/src/quickfix.c	2012-04-25 18:57:17.000000000 +0200
+--- src/quickfix.c	2012-06-01 18:24:07.000000000 +0200
+***************
+*** 247,253 ****
+  			{'t', "."},
+  			{'m', ".\\+"},
+  			{'r', ".*"},
+! 			{'p', "[- .]*"},
+  			{'v', "\\d\\+"},
+  			{'s', ".\\+"}
+  		    };
+--- 247,253 ----
+  			{'t', "."},
+  			{'m', ".\\+"},
+  			{'r', ".*"},
+! 			{'p', "[- 	.]*"},
+  			{'v', "\\d\\+"},
+  			{'s', ".\\+"}
+  		    };
+***************
+*** 677,687 ****
+  		}
+  		if ((i = (int)fmt_ptr->addr[7]) > 0)		/* %p */
+  		{
+  		    if (regmatch.startp[i] == NULL || regmatch.endp[i] == NULL)
+  			continue;
+! 		    col = (int)(regmatch.endp[i] - regmatch.startp[i] + 1);
+! 		    if (*((char_u *)regmatch.startp[i]) != TAB)
+! 			use_viscol = TRUE;
+  		}
+  		if ((i = (int)fmt_ptr->addr[8]) > 0)		/* %v */
+  		{
+--- 677,699 ----
+  		}
+  		if ((i = (int)fmt_ptr->addr[7]) > 0)		/* %p */
+  		{
++ 		    char_u	*match_ptr;
++ 
+  		    if (regmatch.startp[i] == NULL || regmatch.endp[i] == NULL)
+  			continue;
+! 		    col = 0;
+! 		    for (match_ptr = regmatch.startp[i];
+! 				   match_ptr != regmatch.endp[i]; ++match_ptr)
+! 		    {
+! 			++col;
+! 			if (*match_ptr == TAB)
+! 			{
+! 			    col += 7;
+! 			    col -= col % 8;
+! 			}
+! 		    }
+! 		    ++col;
+! 		    use_viscol = TRUE;
+  		}
+  		if ((i = (int)fmt_ptr->addr[8]) > 0)		/* %v */
+  		{
+*** ../vim-7.3.537/src/testdir/test10.in	2011-08-10 18:36:49.000000000 +0200
+--- src/testdir/test10.in	2012-06-01 18:22:40.000000000 +0200
+***************
+*** 8,48 ****
+  :7/start of errorfile/,/end of errorfile/w! Xerrorfile1
+  :7/start of errorfile/,/end of errorfile/-1w! Xerrorfile2
+  :/start of testfile/,/end of testfile/w! Xtestfile
+  :cf Xerrorfile2
+  :clast
+  :copen
+  :let a=w:quickfix_title
+  :wincmd p
+! gR=a

+  :cf Xerrorfile1
+! rA
+  :cn
+! rB
+  :cn
+! rC
+  :cn
+! rD
+  :cn
+! rE
+  :cn
+  :wincmd w
+  :let a=w:quickfix_title
+  :wincmd p
+! gR=a

+  :w! test.out             " Write contents of this file
+  :qa!
+  ENDTEST
+  
+  start of errorfile
+  "Xtestfile", line 4.12: 1506-045 (S) Undeclared identifier fd_set.
+! "Xtestfile", line 7 col 19; this is an error
+  gcc -c -DHAVE_CONFIsing-prototypes -I/usr/X11R6/include  version.c
+! Xtestfile:13: parse error before `asd'
+  make: *** [vim] Error 1
+! in file "Xtestfile" linenr 16: there is an error
+  
+  2 returned
+! "Xtestfile", linenr 19: yet another problem
+  
+  Does anyone know what is the problem and how to correction it?
+  "Xtestfile", line 21 col 9: What is the title of the quickfix window?
+--- 8,88 ----
+  :7/start of errorfile/,/end of errorfile/w! Xerrorfile1
+  :7/start of errorfile/,/end of errorfile/-1w! Xerrorfile2
+  :/start of testfile/,/end of testfile/w! Xtestfile
++ :set efm+==%f=\\,\ line\ %l%*\\D%v%*[^\ ]\ %m
++ :set efm^=%AError\ in\ \"%f\"\ at\ line\ %l:,%Z%p^,%C%m
+  :cf Xerrorfile2
+  :clast
+  :copen
+  :let a=w:quickfix_title
+  :wincmd p
+! lgR=a

+  :cf Xerrorfile1
+! grA
+  :cn
+! gRLINE 6, COL 19
+  :cn
+! gRNO COLUMN SPECIFIED
+  :cn
+! gRAGAIN NO COLUMN
+  :cn
+! gRCOL 1
+  :cn
++ gRCOL 2
++ :cn
++ gRCOL 10
++ :cn
++ gRVCOL 10
++ :cn
++ grI
++ :cn
++ gR. SPACE POINTER
++ :cn
++ gR. DOT POINTER
++ :cn
++ gR. DASH POINTER
++ :cn
++ gR. TAB-SPACE POINTER
++ :clast
++ :cprev
++ :cprev
+  :wincmd w
+  :let a=w:quickfix_title
+  :wincmd p
+! lgR=a

+  :w! test.out             " Write contents of this file
+  :qa!
+  ENDTEST
+  
+  start of errorfile
+  "Xtestfile", line 4.12: 1506-045 (S) Undeclared identifier fd_set.
+! "Xtestfile", line 6 col 19; this is an error
+  gcc -c -DHAVE_CONFIsing-prototypes -I/usr/X11R6/include  version.c
+! Xtestfile:9: parse error before `asd'
+  make: *** [vim] Error 1
+! in file "Xtestfile" linenr 10: there is an error
+  
+  2 returned
+! "Xtestfile", line 11 col 1; this is an error
+! "Xtestfile", line 12 col 2; this is another error
+! "Xtestfile", line 14:10; this is an error in column 10
+! =Xtestfile=, line 15:10; this is another error, but in vcol 10 this time
+! "Xtestfile", linenr 16: yet another problem
+! Error in "Xtestfile" at line 17:
+! x should be a dot
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 17
+!             ^
+! Error in "Xtestfile" at line 18:
+! x should be a dot
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 18
+! .............^
+! Error in "Xtestfile" at line 19:
+! x should be a dot
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 19
+! --------------^
+! Error in "Xtestfile" at line 20:
+! x should be a dot
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 20
+! 	       ^
+  
+  Does anyone know what is the problem and how to correction it?
+  "Xtestfile", line 21 col 9: What is the title of the quickfix window?
+***************
+*** 50,74 ****
+  end of errorfile
+  
+  start of testfile
+! line 2  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 3  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 4  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 5  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 6  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 7  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 8  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 9  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 10 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 11 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 12 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 13 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 14 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 15 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 16 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 17 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 18 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 19 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 20 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 21 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 22 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+  end of testfile
+--- 90,114 ----
+  end of errorfile
+  
+  start of testfile
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  2
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  3
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  4
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  5
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  6
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  7
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  8
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  9
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 10
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 11
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 12
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 13
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 14
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 15
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 16
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 17
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 18
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 19
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 20
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 21
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 22
+  end of testfile
+*** ../vim-7.3.537/src/testdir/test10.ok	2011-08-10 18:36:49.000000000 +0200
+--- src/testdir/test10.ok	2012-06-01 18:22:40.000000000 +0200
+***************
+*** 1,23 ****
+  start of testfile
+! line 2  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 3  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 4  xxxAxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 5  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 6  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 7  xxxxxxxxxxBxxxxxxxxxxxxxxxxxxx
+! line 8  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 9  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 10 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 11 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 12 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! Cine 13 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 14 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 15 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! Dine 16 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 17 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 18 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! Eine 19 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 20 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+! line 21 :cf Xerrorfile1xxxxxxxxxxxxxxx
+! line 22 :cf Xerrorfile2xxxxxxxxxxxxxxx
+  end of testfile
+--- 1,23 ----
+  start of testfile
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  2
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  3
+! 	xxxxxxxxxxAxxxxxxxxxxxxxxxxxxx    line  4
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  5
+! 	xxxxxxxxxxxxxxxxxLINE 6, COL 19   line  6
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  7
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line  8
+! 	NO COLUMN SPECIFIEDxxxxxxxxxxx    line  9
+! 	AGAIN NO COLUMNxxxxxxxxxxxxxxx    line 10
+! COL 1	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 11
+! 	COL 2xxxxxxxxxxxxxxxxxxxxxxxxx    line 12
+! 	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 13
+! 	xxxxxxxxCOL 10xxxxxxxxxxxxxxxx    line 14
+! 	xVCOL 10xxxxxxxxxxxxxxxxxxxxxx    line 15
+! 	Ixxxxxxxxxxxxxxxxxxxxxxxxxxxxx    line 16
+! 	xxxx. SPACE POINTERxxxxxxxxxxx    line 17
+! 	xxxxx. DOT POINTERxxxxxxxxxxxx    line 18
+! 	xxxxxx. DASH POINTERxxxxxxxxxx    line 19
+! 	xxxxxxx. TAB-SPACE POINTERxxxx    line 20
+! 	xxxxxxxx:cf Xerrorfile1xxxxxxx    line 21
+! 	xxxxxxxx:cf Xerrorfile2xxxxxxx    line 22
+  end of testfile
+*** ../vim-7.3.537/src/version.c	2012-06-01 17:49:51.000000000 +0200
+--- src/version.c	2012-06-01 18:22:27.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     538,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+18. Your wife drapes a blond wig over your monitor to remind you of what she
+    looks like.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.539 b/source/ap/vim/patches/7.3.539
new file mode 100644
index 00000000..267c076d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.539
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.539
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.539
+Problem:    Redrawing a character on the command line does not work properly
+	    for multi-byte charactes.
+Solution:   Count the number of bytes in a character. (Yukihiro Nakadaira)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.538/src/ex_getln.c	2012-05-25 11:02:34.000000000 +0200
+--- src/ex_getln.c	2012-06-06 11:50:37.000000000 +0200
+***************
+*** 2764,2769 ****
+--- 2764,2774 ----
+      msg_no_more = TRUE;
+      if (ccline.cmdlen == ccline.cmdpos)
+  	msg_putchar(' ');
++ #ifdef FEAT_MBYTE
++     else if (has_mbyte)
++ 	draw_cmdline(ccline.cmdpos,
++ 			       (*mb_ptr2len)(ccline.cmdbuff + ccline.cmdpos));
++ #endif
+      else
+  	draw_cmdline(ccline.cmdpos, 1);
+      msg_no_more = FALSE;
+*** ../vim-7.3.538/src/version.c	2012-06-01 18:34:37.000000000 +0200
+--- src/version.c	2012-06-06 12:02:45.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     539,
+  /**/
+
+-- 
+If they don't keep on exercising their lips, he thought, their brains
+start working.
+		-- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.540 b/source/ap/vim/patches/7.3.540
new file mode 100644
index 00000000..6793eb43
--- /dev/null
+++ b/source/ap/vim/patches/7.3.540
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.540
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.540
+Problem:    Cursor is left on the text instead of the command line.
+Solution:   Don't call setcursor() in command line mode.
+Files:	    src/getchar.c
+
+
+*** ../vim-7.3.539/src/getchar.c	2012-06-01 15:20:49.000000000 +0200
+--- src/getchar.c	2012-06-06 11:58:05.000000000 +0200
+***************
+*** 2819,2825 ****
+  			edit_unputchar();
+  		    if (State & CMDLINE)
+  			unputcmdline();
+! 		    setcursor();	/* put cursor back where it belongs */
+  		}
+  
+  		if (c < 0)
+--- 2819,2826 ----
+  			edit_unputchar();
+  		    if (State & CMDLINE)
+  			unputcmdline();
+! 		    else
+! 			setcursor();	/* put cursor back where it belongs */
+  		}
+  
+  		if (c < 0)
+*** ../vim-7.3.539/src/version.c	2012-06-06 12:02:57.000000000 +0200
+--- src/version.c	2012-06-06 12:05:22.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     540,
+  /**/
+
+-- 
+"Making it up?  Why should I want to make anything up?  Life's bad enough
+as it is without wanting to invent any more of it."
+		-- Marvin, the Paranoid Android in Douglas Adams'
+		   "The Hitchhiker's Guide to the Galaxy"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.541 b/source/ap/vim/patches/7.3.541
new file mode 100644
index 00000000..133b82da
--- /dev/null
+++ b/source/ap/vim/patches/7.3.541
@@ -0,0 +1,1090 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.541
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.541
+Problem:    When joining lines comment leaders need to be removed manually.
+Solution:   Add the 'j' flag to 'formatoptions'. (Lech Lorens)
+Files:	    runtime/doc/change.txt, src/edit.c, src/ex_docmd.c, src/misc1.c,
+	    src/normal.c, src/ops.c, src/option.h, src/proto/misc1.pro,
+	    src/proto/ops.pro, src/search.c, src/testdir/test29.in,
+	    src/testdir/test29.ok
+
+
+*** ../vim-7.3.540/runtime/doc/change.txt	2011-05-05 14:26:37.000000000 +0200
+--- runtime/doc/change.txt	2012-06-06 13:05:04.000000000 +0200
+***************
+*** 1495,1500 ****
+--- 1522,1533 ----
+  	characters.  Overruled by the 'M' flag.
+  1	Don't break a line after a one-letter word.  It's broken before it
+  	instead (if possible).
++ j	Where it makes sense, remove a comment leader when joining lines.  For
++ 	example, joining:
++ 		int i;   // the index ~
++ 		         // in the list ~
++ 	Becomes:
++ 		int i;   // the index in the list ~
+  
+  
+  With 't' and 'c' you can specify when Vim performs auto-wrapping:
+*** ../vim-7.3.540/src/edit.c	2012-06-01 15:20:49.000000000 +0200
+--- src/edit.c	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 5847,5853 ****
+  	 * Need to remove existing (middle) comment leader and insert end
+  	 * comment leader.  First, check what comment leader we can find.
+  	 */
+! 	i = get_leader_len(line = ml_get_curline(), &p, FALSE);
+  	if (i > 0 && vim_strchr(p, COM_MIDDLE) != NULL)	/* Just checking */
+  	{
+  	    /* Skip middle-comment string */
+--- 5847,5853 ----
+  	 * Need to remove existing (middle) comment leader and insert end
+  	 * comment leader.  First, check what comment leader we can find.
+  	 */
+! 	i = get_leader_len(line = ml_get_curline(), &p, FALSE, TRUE);
+  	if (i > 0 && vim_strchr(p, COM_MIDDLE) != NULL)	/* Just checking */
+  	{
+  	    /* Skip middle-comment string */
+***************
+*** 6085,6091 ****
+  
+  	/* Don't break until after the comment leader */
+  	if (do_comments)
+! 	    leader_len = get_leader_len(ml_get_curline(), NULL, FALSE);
+  	else
+  	    leader_len = 0;
+  
+--- 6085,6091 ----
+  
+  	/* Don't break until after the comment leader */
+  	if (do_comments)
+! 	    leader_len = get_leader_len(ml_get_curline(), NULL, FALSE, TRUE);
+  	else
+  	    leader_len = 0;
+  
+***************
+*** 6411,6417 ****
+      /* With the 'c' flag in 'formatoptions' and 't' missing: only format
+       * comments. */
+      if (has_format_option(FO_WRAP_COMS) && !has_format_option(FO_WRAP)
+! 				     && get_leader_len(old, NULL, FALSE) == 0)
+  	return;
+  #endif
+  
+--- 6411,6417 ----
+      /* With the 'c' flag in 'formatoptions' and 't' missing: only format
+       * comments. */
+      if (has_format_option(FO_WRAP_COMS) && !has_format_option(FO_WRAP)
+! 				     && get_leader_len(old, NULL, FALSE, TRUE) == 0)
+  	return;
+  #endif
+  
+***************
+*** 8565,8571 ****
+      {
+  	temp = curwin->w_cursor.col;
+  	if (!can_bs(BS_EOL)		/* only if "eol" included */
+! 		|| do_join(2, FALSE, TRUE) == FAIL)
+  	    vim_beep();
+  	else
+  	    curwin->w_cursor.col = temp;
+--- 8565,8571 ----
+      {
+  	temp = curwin->w_cursor.col;
+  	if (!can_bs(BS_EOL)		/* only if "eol" included */
+! 		|| do_join(2, FALSE, TRUE, FALSE) == FAIL)
+  	    vim_beep();
+  	else
+  	    curwin->w_cursor.col = temp;
+***************
+*** 8746,8752 ****
+  			ptr[len - 1] = NUL;
+  		}
+  
+! 		(void)do_join(2, FALSE, FALSE);
+  		if (temp == NUL && gchar_cursor() != NUL)
+  		    inc_cursor();
+  	    }
+--- 8746,8752 ----
+  			ptr[len - 1] = NUL;
+  		}
+  
+! 		(void)do_join(2, FALSE, FALSE, FALSE);
+  		if (temp == NUL && gchar_cursor() != NUL)
+  		    inc_cursor();
+  	    }
+*** ../vim-7.3.540/src/ex_docmd.c	2012-04-30 18:48:38.000000000 +0200
+--- src/ex_docmd.c	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 8545,8551 ****
+  	}
+  	++eap->line2;
+      }
+!     (void)do_join(eap->line2 - eap->line1 + 1, !eap->forceit, TRUE);
+      beginline(BL_WHITE | BL_FIX);
+      ex_may_print(eap);
+  }
+--- 8545,8551 ----
+  	}
+  	++eap->line2;
+      }
+!     (void)do_join(eap->line2 - eap->line1 + 1, !eap->forceit, TRUE, TRUE);
+      beginline(BL_WHITE | BL_FIX);
+      ex_may_print(eap);
+  }
+*** ../vim-7.3.540/src/misc1.c	2012-06-01 15:20:49.000000000 +0200
+--- src/misc1.c	2012-06-06 13:27:32.000000000 +0200
+***************
+*** 671,677 ****
+  	    ptr = saved_line;
+  # ifdef FEAT_COMMENTS
+  	    if (flags & OPENLINE_DO_COM)
+! 		lead_len = get_leader_len(ptr, NULL, FALSE);
+  	    else
+  		lead_len = 0;
+  # endif
+--- 671,677 ----
+  	    ptr = saved_line;
+  # ifdef FEAT_COMMENTS
+  	    if (flags & OPENLINE_DO_COM)
+! 		lead_len = get_leader_len(ptr, NULL, FALSE, TRUE);
+  	    else
+  		lead_len = 0;
+  # endif
+***************
+*** 693,699 ****
+  		}
+  # ifdef FEAT_COMMENTS
+  		if (flags & OPENLINE_DO_COM)
+! 		    lead_len = get_leader_len(ptr, NULL, FALSE);
+  		else
+  		    lead_len = 0;
+  		if (lead_len > 0)
+--- 693,699 ----
+  		}
+  # ifdef FEAT_COMMENTS
+  		if (flags & OPENLINE_DO_COM)
+! 		    lead_len = get_leader_len(ptr, NULL, FALSE, TRUE);
+  		else
+  		    lead_len = 0;
+  		if (lead_len > 0)
+***************
+*** 836,842 ****
+       */
+      end_comment_pending = NUL;
+      if (flags & OPENLINE_DO_COM)
+! 	lead_len = get_leader_len(saved_line, &lead_flags, dir == BACKWARD);
+      else
+  	lead_len = 0;
+      if (lead_len > 0)
+--- 836,842 ----
+       */
+      end_comment_pending = NUL;
+      if (flags & OPENLINE_DO_COM)
+! 	lead_len = get_leader_len(saved_line, &lead_flags, dir == BACKWARD, TRUE);
+      else
+  	lead_len = 0;
+      if (lead_len > 0)
+***************
+*** 1548,1561 ****
+   * When "flags" is not NULL, it is set to point to the flags of the recognized
+   * comment leader.
+   * "backward" must be true for the "O" command.
+   */
+      int
+! get_leader_len(line, flags, backward)
+      char_u	*line;
+      char_u	**flags;
+      int		backward;
+  {
+      int		i, j;
+      int		got_com = FALSE;
+      int		found_one;
+      char_u	part_buf[COM_MAX_LEN];	/* buffer for one option part */
+--- 1548,1565 ----
+   * When "flags" is not NULL, it is set to point to the flags of the recognized
+   * comment leader.
+   * "backward" must be true for the "O" command.
++  * If "include_space" is set, include trailing whitespace while calculating the
++  * length.
+   */
+      int
+! get_leader_len(line, flags, backward, include_space)
+      char_u	*line;
+      char_u	**flags;
+      int		backward;
++     int		include_space;
+  {
+      int		i, j;
++     int		result;
+      int		got_com = FALSE;
+      int		found_one;
+      char_u	part_buf[COM_MAX_LEN];	/* buffer for one option part */
+***************
+*** 1565,1571 ****
+      char_u	*prev_list;
+      char_u	*saved_flags = NULL;
+  
+!     i = 0;
+      while (vim_iswhite(line[i]))    /* leading white space is ignored */
+  	++i;
+  
+--- 1569,1575 ----
+      char_u	*prev_list;
+      char_u	*saved_flags = NULL;
+  
+!     result = i = 0;
+      while (vim_iswhite(line[i]))    /* leading white space is ignored */
+  	++i;
+  
+***************
+*** 1668,1684 ****
+  	if (!found_one)
+  	    break;
+  
+  	/* Include any trailing white space. */
+  	while (vim_iswhite(line[i]))
+  	    ++i;
+  
+  	/* If this comment doesn't nest, stop here. */
+  	got_com = TRUE;
+  	if (vim_strchr(part_buf, COM_NEST) == NULL)
+  	    break;
+      }
+  
+!     return (got_com ? i : 0);
+  }
+  #endif
+  
+--- 1672,1838 ----
+  	if (!found_one)
+  	    break;
+  
++ 	result = i;
++ 
+  	/* Include any trailing white space. */
+  	while (vim_iswhite(line[i]))
+  	    ++i;
+  
++ 	if (include_space)
++ 	    result = i;
++ 
+  	/* If this comment doesn't nest, stop here. */
+  	got_com = TRUE;
+  	if (vim_strchr(part_buf, COM_NEST) == NULL)
+  	    break;
+      }
++     return result;
++ }
++ 
++ /*
++  * Return the offset at which the last comment in line starts. If there is no
++  * comment in the whole line, -1 is returned.
++  *
++  * When "flags" is not null, it is set to point to the flags describing the
++  * recognized comment leader.
++  */
++     int
++ get_last_leader_offset(line, flags)
++     char_u	*line;
++     char_u	**flags;
++ {
++     int		result = -1;
++     int		i, j;
++     int		lower_check_bound = 0;
++     char_u	*string;
++     char_u	*com_leader;
++     char_u	*com_flags;
++     char_u	*list;
++     int		found_one;
++     char_u	part_buf[COM_MAX_LEN];	/* buffer for one option part */
++ 
++     /*
++      * Repeat to match several nested comment strings.
++      */
++     i = (int)STRLEN(line);
++     while (--i >= lower_check_bound)
++     {
++ 	/*
++ 	 * scan through the 'comments' option for a match
++ 	 */
++ 	found_one = FALSE;
++ 	for (list = curbuf->b_p_com; *list; )
++ 	{
++ 	    char_u *flags_save = list;
++ 
++ 	    /*
++ 	     * Get one option part into part_buf[].  Advance list to next one.
++ 	     * put string at start of string.
++ 	     */
++ 	    (void)copy_option_part(&list, part_buf, COM_MAX_LEN, ",");
++ 	    string = vim_strchr(part_buf, ':');
++ 	    if (string == NULL)	/* If everything is fine, this cannot actually
++ 				 * happen. */
++ 	    {
++ 		continue;
++ 	    }
++ 	    *string++ = NUL;	/* Isolate flags from string. */
++ 	    com_leader = string;
++ 
++ 	    /*
++ 	     * Line contents and string must match.
++ 	     * When string starts with white space, must have some white space
++ 	     * (but the amount does not need to match, there might be a mix of
++ 	     * TABs and spaces).
++ 	     */
++ 	    if (vim_iswhite(string[0]))
++ 	    {
++ 		if (i == 0 || !vim_iswhite(line[i - 1]))
++ 		    continue;
++ 		while (vim_iswhite(string[0]))
++ 		    ++string;
++ 	    }
++ 	    for (j = 0; string[j] != NUL && string[j] == line[i + j]; ++j)
++ 		/* do nothing */;
++ 	    if (string[j] != NUL)
++ 		continue;
++ 
++ 	    /*
++ 	     * When 'b' flag used, there must be white space or an
++ 	     * end-of-line after the string in the line.
++ 	     */
++ 	    if (vim_strchr(part_buf, COM_BLANK) != NULL
++ 		    && !vim_iswhite(line[i + j]) && line[i + j] != NUL)
++ 	    {
++ 		continue;
++ 	    }
++ 
++ 	    /*
++ 	     * We have found a match, stop searching.
++ 	     */
++ 	    found_one = TRUE;
++ 
++ 	    if (flags)
++ 		*flags = flags_save;
++ 	    com_flags = flags_save;
++ 
++ 	    break;
++ 	}
+  
+! 	if (found_one)
+! 	{
+! 	    char_u  part_buf2[COM_MAX_LEN];	/* buffer for one option part */
+! 	    int     len1, len2, off;
+! 
+! 	    result = i;
+! 	    /*
+! 	     * If this comment nests, continue searching.
+! 	     */
+! 	    if (vim_strchr(part_buf, COM_NEST) != NULL)
+! 		continue;
+! 
+! 	    lower_check_bound = i;
+! 
+! 	    /* Let's verify whether the comment leader found is a substring
+! 	     * of other comment leaders. If it is, let's adjust the
+! 	     * lower_check_bound so that we make sure that we have determined
+! 	     * the comment leader correctly.
+! 	     */
+! 
+! 	    while (vim_iswhite(*com_leader))
+! 		++com_leader;
+! 	    len1 = (int)STRLEN(com_leader);
+! 
+! 	    for (list = curbuf->b_p_com; *list; )
+! 	    {
+! 		char_u *flags_save = list;
+! 
+! 		(void)copy_option_part(&list, part_buf2, COM_MAX_LEN, ",");
+! 		if (flags_save == com_flags)
+! 		    continue;
+! 		string = vim_strchr(part_buf2, ':');
+! 		++string;
+! 		while (vim_iswhite(*string))
+! 		    ++string;
+! 		len2 = (int)STRLEN(string);
+! 		if (len2 == 0)
+! 		    continue;
+! 
+! 		/* Now we have to verify whether string ends with a substring
+! 		 * beginning the com_leader. */
+! 		for (off = (len2 > i ? i : len2); off > 0 && off + len1 > len2;)
+! 		{
+! 		    --off;
+! 		    if (!STRNCMP(string + off, com_leader, len2 - off))
+! 		    {
+! 			if (i - off < lower_check_bound)
+! 			    lower_check_bound = i - off;
+! 		    }
+! 		}
+! 	    }
+! 	}
+!     }
+!     return result;
+  }
+  #endif
+  
+*** ../vim-7.3.540/src/normal.c	2012-05-25 13:12:33.000000000 +0200
+--- src/normal.c	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 1968,1974 ****
+  		beep_flush();
+  	    else
+  	    {
+! 		(void)do_join(oap->line_count, oap->op_type == OP_JOIN, TRUE);
+  		auto_format(FALSE, TRUE);
+  	    }
+  	    break;
+--- 1968,1974 ----
+  		beep_flush();
+  	    else
+  	    {
+! 		(void)do_join(oap->line_count, oap->op_type == OP_JOIN, TRUE, TRUE);
+  		auto_format(FALSE, TRUE);
+  	    }
+  	    break;
+***************
+*** 4426,4432 ****
+  	    break;
+  	}
+  #ifdef FEAT_COMMENTS
+! 	if (get_leader_len(ml_get_curline(), NULL, FALSE) > 0)
+  	{
+  	    /* Ignore this line, continue at start of next line. */
+  	    ++curwin->w_cursor.lnum;
+--- 4426,4432 ----
+  	    break;
+  	}
+  #ifdef FEAT_COMMENTS
+! 	if (get_leader_len(ml_get_curline(), NULL, FALSE, TRUE) > 0)
+  	{
+  	    /* Ignore this line, continue at start of next line. */
+  	    ++curwin->w_cursor.lnum;
+***************
+*** 9324,9330 ****
+  	{
+  	    prep_redo(cap->oap->regname, cap->count0,
+  			 NUL, cap->cmdchar, NUL, NUL, cap->nchar);
+! 	    (void)do_join(cap->count0, cap->nchar == NUL, TRUE);
+  	}
+      }
+  }
+--- 9324,9330 ----
+  	{
+  	    prep_redo(cap->oap->regname, cap->count0,
+  			 NUL, cap->cmdchar, NUL, NUL, cap->nchar);
+! 	    (void)do_join(cap->count0, cap->nchar == NUL, TRUE, TRUE);
+  	}
+      }
+  }
+*** ../vim-7.3.540/src/ops.c	2012-05-18 12:49:33.000000000 +0200
+--- src/ops.c	2012-06-06 15:43:31.000000000 +0200
+***************
+*** 112,117 ****
+--- 112,120 ----
+  # endif
+  #endif
+  static void	dis_msg __ARGS((char_u *p, int skip_esc));
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++ static char_u	*skip_comment __ARGS((char_u *line, int process, int include_space, int *is_comment));
++ #endif
+  #ifdef FEAT_VISUAL
+  static void	block_prep __ARGS((oparg_T *oap, struct block_def *, linenr_T, int));
+  #endif
+***************
+*** 1987,1993 ****
+  		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+  	    }
+  	    if (curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
+! 		(void)do_join(2, FALSE, FALSE);
+  	}
+      }
+  
+--- 1990,1996 ----
+  		curwin->w_cursor = curpos;	/* restore curwin->w_cursor */
+  	    }
+  	    if (curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
+! 		(void)do_join(2, FALSE, FALSE, FALSE);
+  	}
+      }
+  
+***************
+*** 4197,4213 ****
+      ui_breakcheck();
+  }
+  
+  /*
+   * Join 'count' lines (minimal 2) at cursor position.
+   * When "save_undo" is TRUE save lines for undo first.
+   *
+   * return FAIL for failure, OK otherwise
+   */
+      int
+! do_join(count, insert_space, save_undo)
+      long    count;
+      int	    insert_space;
+      int	    save_undo;
+  {
+      char_u	*curr = NULL;
+      char_u      *curr_start = NULL;
+--- 4200,4297 ----
+      ui_breakcheck();
+  }
+  
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++ /*
++  * If "process" is TRUE and the line begins with a comment leader (possibly
++  * after some white space), return a pointer to the text after it. Put a boolean
++  * value indicating whether the line ends with an unclosed comment in
++  * "is_comment".
++  * line - line to be processed,
++  * process - if FALSE, will only check whether the line ends with an unclosed
++  *           comment,
++  * include_space - whether to also skip space following the comment leader,
++  * is_comment - will indicate whether the current line ends with an unclosed
++  *              comment.
++  */
++     static char_u *
++ skip_comment(line, process, include_space, is_comment)
++     char_u   *line;
++     int      process;
++     int	     include_space;
++     int      *is_comment;
++ {
++     char_u *comment_flags = NULL;
++     int    lead_len;
++     int    leader_offset = get_last_leader_offset(line, &comment_flags);
++ 
++     *is_comment = FALSE;
++     if (leader_offset != -1)
++     {
++ 	/* Let's check whether the line ends with an unclosed comment.
++ 	 * If the last comment leader has COM_END in flags, there's no comment.
++ 	 */
++ 	while (*comment_flags)
++ 	{
++ 	    if (*comment_flags == COM_END
++ 		    || *comment_flags == ':')
++ 		break;
++ 	    ++comment_flags;
++ 	}
++ 	if (*comment_flags != COM_END)
++ 	    *is_comment = TRUE;
++     }
++ 
++     if (process == FALSE)
++ 	return line;
++ 
++     lead_len = get_leader_len(line, &comment_flags, FALSE, include_space);
++ 
++     if (lead_len == 0)
++ 	return line;
++ 
++     /* Find:
++      * - COM_START,
++      * - COM_END,
++      * - colon,
++      * whichever comes first.
++      */
++     while (*comment_flags)
++     {
++ 	if (*comment_flags == COM_START
++ 		|| *comment_flags == COM_END
++ 		|| *comment_flags == ':')
++ 	{
++ 	    break;
++ 	}
++ 	++comment_flags;
++     }
++ 
++     /* If we found a colon, it means that we are not processing a line
++      * starting with an opening or a closing part of a three-part
++      * comment. That's good, because we don't want to remove those as
++      * this would be annoying.
++      */
++     if (*comment_flags == ':' || *comment_flags == NUL)
++ 	line += lead_len;
++ 
++     return line;
++ }
++ #endif
++ 
+  /*
+   * Join 'count' lines (minimal 2) at cursor position.
+   * When "save_undo" is TRUE save lines for undo first.
++  * Set "use_formatoptions" to FALSE when e.g. processing
++  * backspace and comment leaders should not be removed.
+   *
+   * return FAIL for failure, OK otherwise
+   */
+      int
+! do_join(count, insert_space, save_undo, use_formatoptions)
+      long    count;
+      int	    insert_space;
+      int	    save_undo;
++     int	    use_formatoptions UNUSED;
+  {
+      char_u	*curr = NULL;
+      char_u      *curr_start = NULL;
+***************
+*** 4221,4226 ****
+--- 4305,4317 ----
+      linenr_T	t;
+      colnr_T	col = 0;
+      int		ret = OK;
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++     int		*comments;
++     int		remove_comments = (use_formatoptions == TRUE)
++ 				  && has_format_option(FO_REMOVE_COMS);
++     int		prev_was_comment;
++ #endif
++ 
+  
+      if (save_undo && u_save((linenr_T)(curwin->w_cursor.lnum - 1),
+  			    (linenr_T)(curwin->w_cursor.lnum + count)) == FAIL)
+***************
+*** 4232,4237 ****
+--- 4323,4339 ----
+      spaces = lalloc_clear((long_u)count, TRUE);
+      if (spaces == NULL)
+  	return FAIL;
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++     if (remove_comments)
++     {
++ 	comments = (int *)lalloc_clear((long_u)count * sizeof(int), TRUE);
++ 	if (comments == NULL)
++ 	{
++ 	    vim_free(spaces);
++ 	    return FAIL;
++ 	}
++     }
++ #endif
+  
+      /*
+       * Don't move anything, just compute the final line length
+***************
+*** 4240,4245 ****
+--- 4342,4366 ----
+      for (t = 0; t < count; ++t)
+      {
+  	curr = curr_start = ml_get((linenr_T)(curwin->w_cursor.lnum + t));
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++ 	if (remove_comments)
++ 	{
++ 	    /* We don't want to remove the comment leader if the
++ 	     * previous line is not a comment. */
++ 	    if (t > 0 && prev_was_comment)
++ 	    {
++ 
++ 		char_u *new_curr = skip_comment(curr, TRUE, insert_space,
++ 							   &prev_was_comment);
++ 		comments[t] = new_curr - curr;
++ 		curr = new_curr;
++ 	    }
++ 	    else
++ 		curr = skip_comment(curr, FALSE, insert_space,
++ 							   &prev_was_comment);
++ 	}
++ #endif
++ 
+  	if (insert_space && t > 0)
+  	{
+  	    curr = skipwhite(curr);
+***************
+*** 4327,4332 ****
+--- 4448,4457 ----
+  	if (t == 0)
+  	    break;
+  	curr = curr_start = ml_get((linenr_T)(curwin->w_cursor.lnum + t - 1));
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++ 	if (remove_comments)
++ 	    curr += comments[t - 1];
++ #endif
+  	if (insert_space && t > 1)
+  	    curr = skipwhite(curr);
+  	currsize = (int)STRLEN(curr);
+***************
+*** 4364,4369 ****
+--- 4489,4498 ----
+  
+  theend:
+      vim_free(spaces);
++ #if defined(FEAT_COMMENTS) || defined(PROTO)
++     if (remove_comments)
++ 	vim_free(comments);
++ #endif
+      return ret;
+  }
+  
+***************
+*** 4788,4794 ****
+  						      (long)-next_leader_len);
+  #endif
+  		curwin->w_cursor.lnum--;
+! 		if (do_join(2, TRUE, FALSE) == FAIL)
+  		{
+  		    beep_flush();
+  		    break;
+--- 4917,4923 ----
+  						      (long)-next_leader_len);
+  #endif
+  		curwin->w_cursor.lnum--;
+! 		if (do_join(2, TRUE, FALSE, FALSE) == FAIL)
+  		{
+  		    beep_flush();
+  		    break;
+***************
+*** 4844,4850 ****
+  
+      ptr = ml_get(lnum);
+      if (do_comments)
+! 	*leader_len = get_leader_len(ptr, leader_flags, FALSE);
+      else
+  	*leader_len = 0;
+  
+--- 4973,4979 ----
+  
+      ptr = ml_get(lnum);
+      if (do_comments)
+! 	*leader_len = get_leader_len(ptr, leader_flags, FALSE, TRUE);
+      else
+  	*leader_len = 0;
+  
+*** ../vim-7.3.540/src/option.h	2012-02-20 22:18:22.000000000 +0100
+--- src/option.h	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 104,113 ****
+  #define FO_ONE_LETTER	'1'
+  #define FO_WHITE_PAR	'w'	/* trailing white space continues paragr. */
+  #define FO_AUTO		'a'	/* automatic formatting */
+  
+  #define DFLT_FO_VI	"vt"
+  #define DFLT_FO_VIM	"tcq"
+! #define FO_ALL		"tcroq2vlb1mMBn,aw"	/* for do_set() */
+  
+  /* characters for the p_cpo option: */
+  #define CPO_ALTREAD	'a'	/* ":read" sets alternate file name */
+--- 104,114 ----
+  #define FO_ONE_LETTER	'1'
+  #define FO_WHITE_PAR	'w'	/* trailing white space continues paragr. */
+  #define FO_AUTO		'a'	/* automatic formatting */
++ #define FO_REMOVE_COMS	'j'	/* remove comment leaders when joining lines */
+  
+  #define DFLT_FO_VI	"vt"
+  #define DFLT_FO_VIM	"tcq"
+! #define FO_ALL		"tcroq2vlb1mMBn,awj"	/* for do_set() */
+  
+  /* characters for the p_cpo option: */
+  #define CPO_ALTREAD	'a'	/* ":read" sets alternate file name */
+*** ../vim-7.3.540/src/proto/misc1.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/misc1.pro	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 6,12 ****
+  int set_indent __ARGS((int size, int flags));
+  int get_number_indent __ARGS((linenr_T lnum));
+  int open_line __ARGS((int dir, int flags, int old_indent));
+! int get_leader_len __ARGS((char_u *line, char_u **flags, int backward));
+  int plines __ARGS((linenr_T lnum));
+  int plines_win __ARGS((win_T *wp, linenr_T lnum, int winheight));
+  int plines_nofill __ARGS((linenr_T lnum));
+--- 6,13 ----
+  int set_indent __ARGS((int size, int flags));
+  int get_number_indent __ARGS((linenr_T lnum));
+  int open_line __ARGS((int dir, int flags, int old_indent));
+! int get_leader_len __ARGS((char_u *line, char_u **flags, int backward, int do_skip_space));
+! int get_last_leader_offset __ARGS((char_u *line, char_u **flags));
+  int plines __ARGS((linenr_T lnum));
+  int plines_win __ARGS((win_T *wp, linenr_T lnum, int winheight));
+  int plines_nofill __ARGS((linenr_T lnum));
+*** ../vim-7.3.540/src/proto/ops.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/ops.pro	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 36,42 ****
+  int preprocs_left __ARGS((void));
+  int get_register_name __ARGS((int num));
+  void ex_display __ARGS((exarg_T *eap));
+! int do_join __ARGS((long count, int insert_space, int save_undo));
+  void op_format __ARGS((oparg_T *oap, int keep_cursor));
+  void op_formatexpr __ARGS((oparg_T *oap));
+  int fex_format __ARGS((linenr_T lnum, long count, int c));
+--- 36,42 ----
+  int preprocs_left __ARGS((void));
+  int get_register_name __ARGS((int num));
+  void ex_display __ARGS((exarg_T *eap));
+! int do_join __ARGS((long count, int insert_space, int save_undo, int use_formatoptions));
+  void op_format __ARGS((oparg_T *oap, int keep_cursor));
+  void op_formatexpr __ARGS((oparg_T *oap));
+  int fex_format __ARGS((linenr_T lnum, long count, int c));
+*** ../vim-7.3.540/src/search.c	2012-02-04 23:34:57.000000000 +0100
+--- src/search.c	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 1548,1554 ****
+      int			len;
+      int			stop = TRUE;
+  #ifdef FEAT_MBYTE
+!     static char_u	bytes[MB_MAXBYTES];
+      static int		bytelen = 1;	/* >1 for multi-byte char */
+  #endif
+  
+--- 1548,1554 ----
+      int			len;
+      int			stop = TRUE;
+  #ifdef FEAT_MBYTE
+!     static char_u	bytes[MB_MAXBYTES + 1];
+      static int		bytelen = 1;	/* >1 for multi-byte char */
+  #endif
+  
+***************
+*** 4901,4907 ****
+  #ifdef FEAT_COMMENTS
+  			if ((*line != '#' ||
+  				STRNCMP(skipwhite(line + 1), "define", 6) != 0)
+! 				&& get_leader_len(line, NULL, FALSE))
+  			    matched = FALSE;
+  
+  			/*
+--- 4901,4907 ----
+  #ifdef FEAT_COMMENTS
+  			if ((*line != '#' ||
+  				STRNCMP(skipwhite(line + 1), "define", 6) != 0)
+! 				&& get_leader_len(line, NULL, FALSE, TRUE))
+  			    matched = FALSE;
+  
+  			/*
+*** ../vim-7.3.540/src/testdir/test29.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test29.in	2012-06-06 15:44:38.000000000 +0200
+***************
+*** 4,19 ****
+   and with 'cpoptions' flag 'j' set or not
+  
+  STARTTEST
+  :set nocompatible viminfo+=nviminfo
+  :set nojoinspaces
+  :set cpoptions-=j
+  /firstline/
+! j"tdGpJjJjJjJjJjJjJjJjJjJjJjJjJjJj05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions+=j
+  j05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions-=j joinspaces
+  j"tpJjJjJjJjJjJjJjJjJjJjJjJjJjJj05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions+=j
+  j05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions-=j nojoinspaces compatible
+! j"tpJjJjJjJjJjJjJjJjJjJjJjJjJjJj4Jy3l$pjdG:?firstline?+1,$w! test.out
+! :qa!
+  ENDTEST
+  
+  firstline
+--- 4,20 ----
+   and with 'cpoptions' flag 'j' set or not
+  
+  STARTTEST
++ :so small.vim
+  :set nocompatible viminfo+=nviminfo
+  :set nojoinspaces
+  :set cpoptions-=j
+  /firstline/
+! j"td/^STARTTEST/-1
+! PJjJjJjJjJjJjJjJjJjJjJjJjJjJj05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions+=j
+  j05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions-=j joinspaces
+  j"tpJjJjJjJjJjJjJjJjJjJjJjJjJjJj05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions+=j
+  j05lmx2j06lmy2k4Jy3l$p`xyl$p`yy2l$p:set cpoptions-=j nojoinspaces compatible
+! j"tpJjJjJjJjJjJjJjJjJjJjJjJjJjJj4Jy3l$pjd/STARTTEST/-2
+  ENDTEST
+  
+  firstline
+***************
+*** 54,56 ****
+--- 55,181 ----
+  hjkl iop!
+  ert
+  
++ STARTTEST
++ /^{/+1
++ :set comments=s1:/*,mb:*,ex:*/,://
++ :set nojoinspaces fo=j
++ :set backspace=eol,start
++ :.,+3join
++ j4J
++ :.,+2join
++ j3J
++ :.,+2join
++ j3J
++ :.,+2join
++ jj3J
++ ENDTEST
++ 
++ {
++ 
++ /*
++  * Make sure the previous comment leader is not removed.
++  */
++ 
++ /*
++  * Make sure the previous comment leader is not removed.
++  */
++ 
++ // Should the next comment leader be left alone?
++ // Yes.
++ 
++ // Should the next comment leader be left alone?
++ // Yes.
++ 
++ /* Here the comment leader should be left intact. */
++ // And so should this one.
++ 
++ /* Here the comment leader should be left intact. */
++ // And so should this one.
++ 
++ if (condition) // Remove the next comment leader!
++                // OK, I will.
++     action();
++ 
++ if (condition) // Remove the next comment leader!
++                // OK, I will.
++     action();
++ }
++ 
++ STARTTEST
++ /^{/+1
++ :set comments=s1:/*,mb:*,ex:*/,://
++ :set comments+=s1:>#,mb:#,ex:#<,:<
++ :set cpoptions-=j joinspaces fo=j
++ :set backspace=eol,start
++ :.,+3join
++ j4J
++ :.,+2join
++ j3J
++ :.,+2join
++ j3J
++ :.,+2join
++ jj3J
++ j:.,+2join
++ jj3J
++ j:.,+5join
++ j6J
++ oSome code!
// Make sure backspacing does not remove this comment leader.0i
++ ENDTEST
++ 
++ {
++ 
++ /*
++  * Make sure the previous comment leader is not removed.
++  */
++ 
++ /*
++  * Make sure the previous comment leader is not removed.
++  */
++ 
++ // Should the next comment leader be left alone?
++ // Yes.
++ 
++ // Should the next comment leader be left alone?
++ // Yes.
++ 
++ /* Here the comment leader should be left intact. */
++ // And so should this one.
++ 
++ /* Here the comment leader should be left intact. */
++ // And so should this one.
++ 
++ if (condition) // Remove the next comment leader!
++                // OK, I will.
++     action();
++ 
++ if (condition) // Remove the next comment leader!
++                // OK, I will.
++     action();
++ 
++ int i = 7 /* foo *// 3
++  // comment
++  ;
++ 
++ int i = 7 /* foo *// 3
++  // comment
++  ;
++ 
++ ># Note that the last character of the ending comment leader (left angle
++  # bracket) is a comment leader itself. Make sure that this comment leader is
++  # not removed from the next line #<
++ < On this line a new comment is opened which spans 2 lines. This comment should
++ < retain its comment leader.
++ 
++ ># Note that the last character of the ending comment leader (left angle
++  # bracket) is a comment leader itself. Make sure that this comment leader is
++  # not removed from the next line #<
++ < On this line a new comment is opened which spans 2 lines. This comment should
++ < retain its comment leader.
++ 
++ }
++ 
++ STARTTEST
++ :g/^STARTTEST/.,/^ENDTEST/d
++ :?firstline?+1,$w! test.out
++ :qa!
++ ENDTEST
+*** ../vim-7.3.540/src/testdir/test29.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test29.ok	2012-06-06 13:00:29.000000000 +0200
+***************
+*** 47,49 ****
+--- 47,86 ----
+  asdfasdf 	asdf
+  asdfasdf		asdf
+  zx cvn.  as dfg? hjkl iop! ert  a
++ 
++ 
++ {
++ /* Make sure the previous comment leader is not removed. */
++ /* Make sure the previous comment leader is not removed. */
++ // Should the next comment leader be left alone? Yes.
++ // Should the next comment leader be left alone? Yes.
++ /* Here the comment leader should be left intact. */ // And so should this one.
++ /* Here the comment leader should be left intact. */ // And so should this one.
++ if (condition) // Remove the next comment leader! OK, I will.
++     action();
++ if (condition) // Remove the next comment leader! OK, I will.
++     action();
++ }
++ 
++ 
++ {
++ /* Make sure the previous comment leader is not removed.  */
++ /* Make sure the previous comment leader is not removed.  */
++ // Should the next comment leader be left alone?  Yes.
++ // Should the next comment leader be left alone?  Yes.
++ /* Here the comment leader should be left intact. */ // And so should this one.
++ /* Here the comment leader should be left intact. */ // And so should this one.
++ if (condition) // Remove the next comment leader!  OK, I will.
++     action();
++ if (condition) // Remove the next comment leader!  OK, I will.
++     action();
++ int i = 7 /* foo *// 3 // comment
++  ;
++ int i = 7 /* foo *// 3 // comment
++  ;
++ ># Note that the last character of the ending comment leader (left angle bracket) is a comment leader itself. Make sure that this comment leader is not removed from the next line #< < On this line a new comment is opened which spans 2 lines. This comment should retain its comment leader.
++ ># Note that the last character of the ending comment leader (left angle bracket) is a comment leader itself. Make sure that this comment leader is not removed from the next line #< < On this line a new comment is opened which spans 2 lines. This comment should retain its comment leader.
++ 
++ Some code!// Make sure backspacing does not remove this comment leader.
++ }
++ 
+*** ../vim-7.3.540/src/version.c	2012-06-06 12:06:10.000000000 +0200
+--- src/version.c	2012-06-06 16:10:03.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     541,
+  /**/
+
+-- 
+I have a drinking problem -- I don't have a drink!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.542 b/source/ap/vim/patches/7.3.542
new file mode 100644
index 00000000..81086126
--- /dev/null
+++ b/source/ap/vim/patches/7.3.542
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.542
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.542 (after 7.3.506)
+Problem:    Function is sometimes unused.
+Solution:   Add #ifdef.
+Files:	    src/gui_gtk.c
+
+
+*** ../vim-7.3.541/src/gui_gtk.c	2012-04-25 17:10:12.000000000 +0200
+--- src/gui_gtk.c	2012-06-06 15:25:12.000000000 +0200
+***************
+*** 90,100 ****
+--- 90,102 ----
+  static void entry_activate_cb(GtkWidget *widget, gpointer data);
+  static void entry_changed_cb(GtkWidget *entry, GtkWidget *dialog);
+  static void find_replace_cb(GtkWidget *widget, gpointer data);
++ #if defined(FEAT_BROWSE) || defined(PROTO)
+  static void recent_func_log_func(
+  	const gchar *log_domain,
+  	GLogLevelFlags log_level,
+  	const gchar *message,
+  	gpointer user_data);
++ #endif
+  
+  #if defined(FEAT_TOOLBAR)
+  /*
+***************
+*** 1896,1901 ****
+--- 1898,1904 ----
+      do_cmdline_cmd((char_u *)"emenu ToolBar.FindHelp");
+  }
+  
++ #if defined(FEAT_BROWSE) || defined(PROTO)
+      static void
+  recent_func_log_func(const gchar *log_domain UNUSED,
+  		     GLogLevelFlags log_level UNUSED,
+***************
+*** 1905,1908 ****
+      /* We just want to suppress the warnings. */
+      /* http://bugzilla.gnome.org/show_bug.cgi?id=664587 */
+  }
+! 
+--- 1908,1911 ----
+      /* We just want to suppress the warnings. */
+      /* http://bugzilla.gnome.org/show_bug.cgi?id=664587 */
+  }
+! #endif
+*** ../vim-7.3.541/src/version.c	2012-06-06 16:12:54.000000000 +0200
+--- src/version.c	2012-06-06 16:14:17.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     542,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+1. At lunch time, sit in your parked car with sunglasses on and point
+   a hair dryer at passing cars. See if they slow down.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.543 b/source/ap/vim/patches/7.3.543
new file mode 100644
index 00000000..3fa569cc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.543
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.543
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.543
+Problem:    The cursor is in the wrong line after using ":copen". (John
+	    Beckett)
+Solution:   Invoke more drastic redraw method.
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.542/src/eval.c	2012-06-01 15:20:49.000000000 +0200
+--- src/eval.c	2012-06-06 16:28:11.000000000 +0200
+***************
+*** 18507,18515 ****
+  	curwin->w_skipcol = get_dict_number(dict, (char_u *)"skipcol");
+  
+  	check_cursor();
+! 	changed_cline_bef_curs();
+! 	invalidate_botline();
+! 	redraw_later(VALID);
+  
+  	if (curwin->w_topline == 0)
+  	    curwin->w_topline = 1;
+--- 18507,18513 ----
+  	curwin->w_skipcol = get_dict_number(dict, (char_u *)"skipcol");
+  
+  	check_cursor();
+! 	changed_window_setting();
+  
+  	if (curwin->w_topline == 0)
+  	    curwin->w_topline = 1;
+*** ../vim-7.3.542/src/version.c	2012-06-06 16:14:36.000000000 +0200
+--- src/version.c	2012-06-06 16:28:16.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     543,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+2. Page yourself over the intercom. Don't disguise your voice.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.544 b/source/ap/vim/patches/7.3.544
new file mode 100644
index 00000000..198a6cb1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.544
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.544
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.544
+Problem:    There is no good way to close a quickfix window when closing the
+	    last ordinary window.
+Solution:   Add the QuitPre autocommand.
+Files:	    src/ex_docmd.c, src/fileio.c, src/vim.h
+
+
+*** ../vim-7.3.543/src/ex_docmd.c	2012-06-06 16:12:54.000000000 +0200
+--- src/ex_docmd.c	2012-06-06 17:58:41.000000000 +0200
+***************
+*** 6458,6463 ****
+--- 6458,6464 ----
+  	return;
+      }
+  #ifdef FEAT_AUTOCMD
++     apply_autocmds(EVENT_QUITPRE, NULL, NULL, FALSE, curbuf);
+      if (curbuf_locked())
+  	return;
+  #endif
+*** ../vim-7.3.543/src/fileio.c	2012-04-30 17:04:47.000000000 +0200
+--- src/fileio.c	2012-06-06 17:32:12.000000000 +0200
+***************
+*** 7678,7683 ****
+--- 7678,7684 ----
+      {"MenuPopup",	EVENT_MENUPOPUP},
+      {"QuickFixCmdPost",	EVENT_QUICKFIXCMDPOST},
+      {"QuickFixCmdPre",	EVENT_QUICKFIXCMDPRE},
++     {"QuitPre",		EVENT_QUITPRE},
+      {"RemoteReply",	EVENT_REMOTEREPLY},
+      {"SessionLoadPost",	EVENT_SESSIONLOADPOST},
+      {"ShellCmdPost",	EVENT_SHELLCMDPOST},
+*** ../vim-7.3.543/src/vim.h	2012-06-01 15:20:49.000000000 +0200
+--- src/vim.h	2012-06-06 17:30:01.000000000 +0200
+***************
+*** 1264,1271 ****
+      EVENT_INSERTENTER,		/* when entering Insert mode */
+      EVENT_INSERTLEAVE,		/* when leaving Insert mode */
+      EVENT_MENUPOPUP,		/* just before popup menu is displayed */
+!     EVENT_QUICKFIXCMDPOST,	/* after :make, :grep etc */
+!     EVENT_QUICKFIXCMDPRE,	/* before :make, :grep etc */
+      EVENT_SESSIONLOADPOST,	/* after loading a session file */
+      EVENT_STDINREADPOST,	/* after reading from stdin */
+      EVENT_STDINREADPRE,		/* before reading from stdin */
+--- 1264,1272 ----
+      EVENT_INSERTENTER,		/* when entering Insert mode */
+      EVENT_INSERTLEAVE,		/* when leaving Insert mode */
+      EVENT_MENUPOPUP,		/* just before popup menu is displayed */
+!     EVENT_QUICKFIXCMDPOST,	/* after :make, :grep etc. */
+!     EVENT_QUICKFIXCMDPRE,	/* before :make, :grep etc. */
+!     EVENT_QUITPRE,		/* before :quit */
+      EVENT_SESSIONLOADPOST,	/* after loading a session file */
+      EVENT_STDINREADPOST,	/* after reading from stdin */
+      EVENT_STDINREADPRE,		/* before reading from stdin */
+*** ../vim-7.3.543/src/version.c	2012-06-06 16:29:06.000000000 +0200
+--- src/version.c	2012-06-06 18:02:09.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     544,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+3. Every time someone asks you to do something, ask if they want fries
+   with that.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.545 b/source/ap/vim/patches/7.3.545
new file mode 100644
index 00000000..1bd76ebe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.545
@@ -0,0 +1,359 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.545
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.545
+Problem:    When closing a window or buffer autocommands may close it too,
+	    causing problems for where the autocommand was invoked from.
+Solution:   Add the w_closing and b_closing flags.  When set disallow ":q" and
+	    ":close" to prevent recursive closing.
+Files:	    src/structs.h, src/buffer.c, src/ex_docmd.c, src/window.c
+
+
+*** ../vim-7.3.544/src/structs.h	2012-02-04 21:57:44.000000000 +0100
+--- src/structs.h	2012-06-06 16:43:34.000000000 +0200
+***************
+*** 1201,1206 ****
+--- 1201,1210 ----
+  typedef struct qf_info_S qf_info_T;
+  #endif
+  
++ /*
++  * These are items normally related to a buffer.  But when using ":ownsyntax"
++  * a window may have its own instance.
++  */
+  typedef struct {
+  #ifdef FEAT_SYN_HL
+      hashtab_T	b_keywtab;		/* syntax keywords hash table */
+***************
+*** 1290,1295 ****
+--- 1294,1303 ----
+      int		b_nwindows;	/* nr of windows open on this buffer */
+  
+      int		b_flags;	/* various BF_ flags */
++ #ifdef FEAT_AUTOCMD
++     int		b_closing;	/* buffer is being closed, don't let
++ 				   autocommands close it too. */
++ #endif
+  
+      /*
+       * b_ffname has the full path of the file (NULL for no name).
+***************
+*** 1853,1858 ****
+--- 1861,1870 ----
+      win_T	*w_prev;	    /* link to previous window */
+      win_T	*w_next;	    /* link to next window */
+  #endif
++ #ifdef FEAT_AUTOCMD
++     int		w_closing;	    /* window is being closed, don't let
++ 				       autocommands close it too. */
++ #endif
+  
+      frame_T	*w_frame;	    /* frame containing this window */
+  
+*** ../vim-7.3.544/src/buffer.c	2012-03-16 14:32:10.000000000 +0100
+--- src/buffer.c	2012-06-06 18:57:27.000000000 +0200
+***************
+*** 377,404 ****
+      /* When the buffer is no longer in a window, trigger BufWinLeave */
+      if (buf->b_nwindows == 1)
+      {
+  	apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	/* Return if autocommands deleted the buffer or made it the only one. */
+! 	if (!buf_valid(buf) || (abort_if_last && one_window()))
+  	{
+  	    EMSG(_(e_auabort));
+  	    return;
+  	}
+  
+  	/* When the buffer becomes hidden, but is not unloaded, trigger
+  	 * BufHidden */
+  	if (!unload_buf)
+  	{
+  	    apply_autocmds(EVENT_BUFHIDDEN, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	    /* Return if autocommands deleted the buffer or made it the only
+! 	     * one. */
+! 	    if (!buf_valid(buf) || (abort_if_last && one_window()))
+! 	    {
+! 		EMSG(_(e_auabort));
+! 		return;
+! 	    }
+  	}
+  # ifdef FEAT_EVAL
+  	if (aborting())	    /* autocmds may abort script processing */
+--- 377,411 ----
+      /* When the buffer is no longer in a window, trigger BufWinLeave */
+      if (buf->b_nwindows == 1)
+      {
++ 	buf->b_closing = TRUE;
+  	apply_autocmds(EVENT_BUFWINLEAVE, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	if (!buf_valid(buf))
+  	{
++ 	    /* Autocommands deleted the buffer. */
++ aucmd_abort:
+  	    EMSG(_(e_auabort));
+  	    return;
+  	}
++ 	buf->b_closing = FALSE;
++ 	if (abort_if_last && one_window())
++ 	    /* Autocommands made this the only window. */
++ 	    goto aucmd_abort;
+  
+  	/* When the buffer becomes hidden, but is not unloaded, trigger
+  	 * BufHidden */
+  	if (!unload_buf)
+  	{
++ 	    buf->b_closing = TRUE;
+  	    apply_autocmds(EVENT_BUFHIDDEN, buf->b_fname, buf->b_fname,
+  								  FALSE, buf);
+! 	    if (!buf_valid(buf))
+! 		/* Autocommands deleted the buffer. */
+! 		goto aucmd_abort;
+! 	    buf->b_closing = FALSE;
+! 	    if (abort_if_last && one_window())
+! 		/* Autocommands made this the only window. */
+! 		goto aucmd_abort;
+  	}
+  # ifdef FEAT_EVAL
+  	if (aborting())	    /* autocmds may abort script processing */
+***************
+*** 552,557 ****
+--- 559,565 ----
+  #ifdef FEAT_AUTOCMD
+      int		is_curbuf = (buf == curbuf);
+  
++     buf->b_closing = TRUE;
+      apply_autocmds(EVENT_BUFUNLOAD, buf->b_fname, buf->b_fname, FALSE, buf);
+      if (!buf_valid(buf))	    /* autocommands may delete the buffer */
+  	return;
+***************
+*** 568,573 ****
+--- 576,582 ----
+  	if (!buf_valid(buf))	    /* autocommands may delete the buffer */
+  	    return;
+      }
++     buf->b_closing = FALSE;
+  # ifdef FEAT_EVAL
+      if (aborting())	    /* autocmds may abort script processing */
+  	return;
+***************
+*** 1150,1155 ****
+--- 1159,1167 ----
+  	 * a window with this buffer.
+  	 */
+  	while (buf == curbuf
++ # ifdef FEAT_AUTOCMD
++ 		   && !(curwin->w_closing || curwin->w_buffer->b_closing)
++ # endif
+  		   && (firstwin != lastwin || first_tabpage->tp_next != NULL))
+  	    win_close(curwin, FALSE);
+  #endif
+***************
+*** 4750,4756 ****
+  #ifdef FEAT_WINDOWS
+  		    || (had_tab > 0 && wp != firstwin)
+  #endif
+! 		    ) && firstwin != lastwin)
+  	    {
+  		win_close(wp, FALSE);
+  #ifdef FEAT_AUTOCMD
+--- 4762,4772 ----
+  #ifdef FEAT_WINDOWS
+  		    || (had_tab > 0 && wp != firstwin)
+  #endif
+! 		    ) && firstwin != lastwin
+! #ifdef FEAT_AUTOCMD
+! 		    && !(wp->w_closing || wp->w_buffer->b_closing)
+! #endif
+! 		    )
+  	    {
+  		win_close(wp, FALSE);
+  #ifdef FEAT_AUTOCMD
+*** ../vim-7.3.544/src/ex_docmd.c	2012-06-06 18:03:01.000000000 +0200
+--- src/ex_docmd.c	2012-06-06 18:06:46.000000000 +0200
+***************
+*** 6459,6465 ****
+      }
+  #ifdef FEAT_AUTOCMD
+      apply_autocmds(EVENT_QUITPRE, NULL, NULL, FALSE, curbuf);
+!     if (curbuf_locked())
+  	return;
+  #endif
+  
+--- 6459,6467 ----
+      }
+  #ifdef FEAT_AUTOCMD
+      apply_autocmds(EVENT_QUITPRE, NULL, NULL, FALSE, curbuf);
+!     /* Refuse to quick when locked or when the buffer in the last window is
+!      * being closed (can only happen in autocommands). */
+!     if (curbuf_locked() || (curbuf->b_nwindows == 1 && curbuf->b_closing))
+  	return;
+  #endif
+  
+*** ../vim-7.3.544/src/window.c	2012-05-25 12:38:57.000000000 +0200
+--- src/window.c	2012-06-06 18:47:19.000000000 +0200
+***************
+*** 2034,2040 ****
+  
+      for (wp = firstwin; wp != NULL && lastwin != firstwin; )
+      {
+! 	if (wp->w_buffer == buf && (!keep_curwin || wp != curwin))
+  	{
+  	    win_close(wp, FALSE);
+  
+--- 2034,2044 ----
+  
+      for (wp = firstwin; wp != NULL && lastwin != firstwin; )
+      {
+! 	if (wp->w_buffer == buf && (!keep_curwin || wp != curwin)
+! #ifdef FEAT_AUTOCMD
+! 		&& !(wp->w_closing || wp->w_buffer->b_closing)
+! #endif
+! 		)
+  	{
+  	    win_close(wp, FALSE);
+  
+***************
+*** 2051,2057 ****
+  	nexttp = tp->tp_next;
+  	if (tp != curtab)
+  	    for (wp = tp->tp_firstwin; wp != NULL; wp = wp->w_next)
+! 		if (wp->w_buffer == buf)
+  		{
+  		    win_close_othertab(wp, FALSE, tp);
+  
+--- 2055,2065 ----
+  	nexttp = tp->tp_next;
+  	if (tp != curtab)
+  	    for (wp = tp->tp_firstwin; wp != NULL; wp = wp->w_next)
+! 		if (wp->w_buffer == buf
+! #ifdef FEAT_AUTOCMD
+! 		    && !(wp->w_closing || wp->w_buffer->b_closing)
+! #endif
+! 		    )
+  		{
+  		    win_close_othertab(wp, FALSE, tp);
+  
+***************
+*** 2168,2173 ****
+--- 2176,2183 ----
+      }
+  
+  #ifdef FEAT_AUTOCMD
++     if (win->w_closing || win->w_buffer->b_closing)
++ 	return; /* window is already being closed */
+      if (win == aucmd_win)
+      {
+  	EMSG(_("E813: Cannot close autocmd window"));
+***************
+*** 2203,2219 ****
+  	wp = frame2win(win_altframe(win, NULL));
+  
+  	/*
+! 	 * Be careful: If autocommands delete the window, return now.
+  	 */
+  	if (wp->w_buffer != curbuf)
+  	{
+  	    other_buffer = TRUE;
+  	    apply_autocmds(EVENT_BUFLEAVE, NULL, NULL, FALSE, curbuf);
+! 	    if (!win_valid(win) || last_window())
+  		return;
+  	}
+  	apply_autocmds(EVENT_WINLEAVE, NULL, NULL, FALSE, curbuf);
+! 	if (!win_valid(win) || last_window())
+  	    return;
+  # ifdef FEAT_EVAL
+  	/* autocmds may abort script processing */
+--- 2213,2238 ----
+  	wp = frame2win(win_altframe(win, NULL));
+  
+  	/*
+! 	 * Be careful: If autocommands delete the window or cause this window
+! 	 * to be the last one left, return now.
+  	 */
+  	if (wp->w_buffer != curbuf)
+  	{
+  	    other_buffer = TRUE;
++ 	    win->w_closing = TRUE;
+  	    apply_autocmds(EVENT_BUFLEAVE, NULL, NULL, FALSE, curbuf);
+! 	    if (!win_valid(win))
+! 		return;
+! 	    win->w_closing = FALSE;
+! 	    if (last_window())
+  		return;
+  	}
++ 	win->w_closing = TRUE;
+  	apply_autocmds(EVENT_WINLEAVE, NULL, NULL, FALSE, curbuf);
+! 	if (!win_valid(win))
+! 	    return;
+! 	win->w_closing = FALSE;
+! 	if (last_window())
+  	    return;
+  # ifdef FEAT_EVAL
+  	/* autocmds may abort script processing */
+***************
+*** 2240,2246 ****
+       * Close the link to the buffer.
+       */
+      if (win->w_buffer != NULL)
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, TRUE);
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+--- 2259,2274 ----
+       * Close the link to the buffer.
+       */
+      if (win->w_buffer != NULL)
+!     {
+! #ifdef FEAT_AUTOCMD
+! 	win->w_closing = TRUE;
+! #endif
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, FALSE);
+! #ifdef FEAT_AUTOCMD
+! 	if (win_valid(win))
+! 	    win->w_closing = FALSE;
+! #endif
+!     }
+  
+      /* Autocommands may have closed the window already, or closed the only
+       * other window or moved to another tab page. */
+***************
+*** 2346,2351 ****
+--- 2374,2384 ----
+      tabpage_T   *ptp = NULL;
+      int		free_tp = FALSE;
+  
++ #ifdef FEAT_AUTOCMD
++     if (win->w_closing || win->w_buffer->b_closing)
++ 	return; /* window is already being closed */
++ #endif
++ 
+      /* Close the link to the buffer. */
+      close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, FALSE);
+  
+*** ../vim-7.3.544/src/version.c	2012-06-06 18:03:01.000000000 +0200
+--- src/version.c	2012-06-06 18:53:06.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     545,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+4. Put your garbage can on your desk and label it "in".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.546 b/source/ap/vim/patches/7.3.546
new file mode 100644
index 00000000..c883d2d6
--- /dev/null
+++ b/source/ap/vim/patches/7.3.546
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.546
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.546
+Problem:    Bogus line break.
+Solution:   Remove the line break.
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.545/src/screen.c	2012-06-01 15:20:49.000000000 +0200
+--- src/screen.c	2012-06-01 16:31:30.000000000 +0200
+***************
+*** 3228,3235 ****
+  		/* no bad word found at line start, don't check until end of a
+  		 * word */
+  		spell_hlf = HLF_COUNT;
+! 		word_end = (int)(spell_to_word_end(ptr, wp)
+! 								  - line + 1);
+  	    }
+  	    else
+  	    {
+--- 3228,3234 ----
+  		/* no bad word found at line start, don't check until end of a
+  		 * word */
+  		spell_hlf = HLF_COUNT;
+! 		word_end = (int)(spell_to_word_end(ptr, wp) - line + 1);
+  	    }
+  	    else
+  	    {
+*** ../vim-7.3.545/src/version.c	2012-06-06 19:02:40.000000000 +0200
+--- src/version.c	2012-06-06 19:05:11.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     546,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+5. Put decaf in the coffee maker for 3 weeks. Once everyone has gotten
+   over their caffeine addictions, switch to espresso.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.547 b/source/ap/vim/patches/7.3.547
new file mode 100644
index 00000000..5533144a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.547
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.547
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.547 (after 7.3.541)
+Problem:    Compiler warning for uninitialized variable.
+Solution:   Initialize it.
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.546/src/ops.c	2012-06-06 16:12:54.000000000 +0200
+--- src/ops.c	2012-06-06 23:06:45.000000000 +0200
+***************
+*** 4306,4312 ****
+      colnr_T	col = 0;
+      int		ret = OK;
+  #if defined(FEAT_COMMENTS) || defined(PROTO)
+!     int		*comments;
+      int		remove_comments = (use_formatoptions == TRUE)
+  				  && has_format_option(FO_REMOVE_COMS);
+      int		prev_was_comment;
+--- 4306,4312 ----
+      colnr_T	col = 0;
+      int		ret = OK;
+  #if defined(FEAT_COMMENTS) || defined(PROTO)
+!     int		*comments = NULL;
+      int		remove_comments = (use_formatoptions == TRUE)
+  				  && has_format_option(FO_REMOVE_COMS);
+      int		prev_was_comment;
+*** ../vim-7.3.546/src/version.c	2012-06-06 19:05:45.000000000 +0200
+--- src/version.c	2012-06-06 23:07:26.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     547,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+9. As often as possible, skip rather than walk.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.548 b/source/ap/vim/patches/7.3.548
new file mode 100644
index 00000000..3692a9a9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.548
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.548
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.548
+Problem:    Compiler warning on 64 bit Windows.
+Solution:   Add type cast. (Mike Williams)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.547/src/ops.c	2012-06-06 23:08:33.000000000 +0200
+--- src/ops.c	2012-06-07 21:07:57.000000000 +0200
+***************
+*** 4352,4358 ****
+  
+  		char_u *new_curr = skip_comment(curr, TRUE, insert_space,
+  							   &prev_was_comment);
+! 		comments[t] = new_curr - curr;
+  		curr = new_curr;
+  	    }
+  	    else
+--- 4352,4358 ----
+  
+  		char_u *new_curr = skip_comment(curr, TRUE, insert_space,
+  							   &prev_was_comment);
+! 		comments[t] = (int)(new_curr - curr);
+  		curr = new_curr;
+  	    }
+  	    else
+*** ../vim-7.3.547/src/version.c	2012-06-06 23:08:33.000000000 +0200
+--- src/version.c	2012-06-07 21:08:35.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     548,
+  /**/
+
+-- 
+How To Keep A Healthy Level Of Insanity:
+17. When the money comes out the ATM, scream "I won!, I won! 3rd
+    time this week!!!!!"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.549 b/source/ap/vim/patches/7.3.549
new file mode 100644
index 00000000..6d27fc3f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.549
@@ -0,0 +1,125 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.549
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.549
+Problem:    In 'cinoptions' "0s" is interpreted as one shiftwidth. (David
+	    Pineau)
+Solution:   Use the zero as zero. (Lech Lorens)
+Files:	    src/misc1.c, src/testdir/test3.in, src/testdir/test3.ok
+
+
+*** ../vim-7.3.548/src/misc1.c	2012-06-06 16:12:54.000000000 +0200
+--- src/misc1.c	2012-06-13 13:17:11.000000000 +0200
+***************
+*** 6635,6640 ****
+--- 6635,6641 ----
+      int		whilelevel;
+      linenr_T	lnum;
+      char_u	*options;
++     char_u	*digits;
+      int		fraction = 0;	    /* init for GCC */
+      int		divider;
+      int		n;
+***************
+*** 6650,6655 ****
+--- 6651,6657 ----
+  	l = options++;
+  	if (*options == '-')
+  	    ++options;
++ 	digits = options;	    /* remember where the digits start */
+  	n = getdigits(&options);
+  	divider = 0;
+  	if (*options == '.')	    /* ".5s" means a fraction */
+***************
+*** 6666,6672 ****
+  	}
+  	if (*options == 's')	    /* "2s" means two times 'shiftwidth' */
+  	{
+! 	    if (n == 0 && fraction == 0)
+  		n = curbuf->b_p_sw;	/* just "s" is one 'shiftwidth' */
+  	    else
+  	    {
+--- 6668,6674 ----
+  	}
+  	if (*options == 's')	    /* "2s" means two times 'shiftwidth' */
+  	{
+! 	    if (options == digits)
+  		n = curbuf->b_p_sw;	/* just "s" is one 'shiftwidth' */
+  	    else
+  	    {
+*** ../vim-7.3.548/src/testdir/test3.in	2012-04-05 17:17:38.000000000 +0200
+--- src/testdir/test3.in	2012-06-13 13:17:31.000000000 +0200
+***************
+*** 977,982 ****
+--- 977,1000 ----
+  
+  STARTTEST
+  :set cin
++ :set cino=es,n0s
++ /main
++ =][
++ ENDTEST
++ 
++ main(void)
++ {
++ 	/* Make sure that cino=X0s is not parsed like cino=Xs. */
++ 	if (cond)
++ 		foo();
++ 	else
++ 	{
++ 		bar();
++ 	}
++ }
++ 
++ STARTTEST
++ :set cin
+  :set cino=
+  ]]=][
+  ENDTEST
+*** ../vim-7.3.548/src/testdir/test3.ok	2012-04-05 17:17:38.000000000 +0200
+--- src/testdir/test3.ok	2012-06-13 13:17:31.000000000 +0200
+***************
+*** 940,945 ****
+--- 940,957 ----
+  }
+  
+  
++ main(void)
++ {
++ 	/* Make sure that cino=X0s is not parsed like cino=Xs. */
++ 	if (cond)
++ 		foo();
++ 	else
++ 	{
++ 		bar();
++ 	}
++ }
++ 
++ 
+  {
+  	do
+  	{
+*** ../vim-7.3.548/src/version.c	2012-06-07 21:09:35.000000000 +0200
+--- src/version.c	2012-06-13 13:37:18.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     549,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+29. Your phone bill comes to your doorstep in a box.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.550 b/source/ap/vim/patches/7.3.550
new file mode 100644
index 00000000..6fba66cd
--- /dev/null
+++ b/source/ap/vim/patches/7.3.550
@@ -0,0 +1,160 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.550
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.550 (after 7.3.541)
+Problem:    With "j" in 'formatoptions' a list leader is not removed. (Gary
+	    Johnson)
+Solution:   Don't ignore the start of a three part comment. (Lech Lorens)
+Files:	    src/ops.c, src/testdir/test29.in, src/testdir/test29.ok
+
+
+*** ../vim-7.3.549/src/ops.c	2012-06-07 21:09:35.000000000 +0200
+--- src/ops.c	2012-06-13 13:48:26.000000000 +0200
+***************
+*** 4250,4264 ****
+  	return line;
+  
+      /* Find:
+-      * - COM_START,
+       * - COM_END,
+       * - colon,
+       * whichever comes first.
+       */
+      while (*comment_flags)
+      {
+! 	if (*comment_flags == COM_START
+! 		|| *comment_flags == COM_END
+  		|| *comment_flags == ':')
+  	{
+  	    break;
+--- 4250,4262 ----
+  	return line;
+  
+      /* Find:
+       * - COM_END,
+       * - colon,
+       * whichever comes first.
+       */
+      while (*comment_flags)
+      {
+! 	if (*comment_flags == COM_END
+  		|| *comment_flags == ':')
+  	{
+  	    break;
+***************
+*** 4267,4275 ****
+      }
+  
+      /* If we found a colon, it means that we are not processing a line
+!      * starting with an opening or a closing part of a three-part
+!      * comment. That's good, because we don't want to remove those as
+!      * this would be annoying.
+       */
+      if (*comment_flags == ':' || *comment_flags == NUL)
+  	line += lead_len;
+--- 4265,4272 ----
+      }
+  
+      /* If we found a colon, it means that we are not processing a line
+!      * starting with a closing part of a three-part comment. That's good,
+!      * because we don't want to remove those as this would be annoying.
+       */
+      if (*comment_flags == ':' || *comment_flags == NUL)
+  	line += lead_len;
+*** ../vim-7.3.549/src/testdir/test29.in	2012-06-06 16:12:54.000000000 +0200
+--- src/testdir/test29.in	2012-06-13 13:48:26.000000000 +0200
+***************
+*** 103,114 ****
+  
+  STARTTEST
+  /^{/+1
+! :set comments=s1:/*,mb:*,ex:*/,://
+  :set comments+=s1:>#,mb:#,ex:#<,:<
+  :set cpoptions-=j joinspaces fo=j
+  :set backspace=eol,start
+  :.,+3join
+  j4J
+  :.,+2join
+  j3J
+  :.,+2join
+--- 103,117 ----
+  
+  STARTTEST
+  /^{/+1
+! :set comments=sO:*\ -,mO:*\ \ ,exO:*/
+! :set comments+=s1:/*,mb:*,ex:*/,://
+  :set comments+=s1:>#,mb:#,ex:#<,:<
+  :set cpoptions-=j joinspaces fo=j
+  :set backspace=eol,start
+  :.,+3join
+  j4J
++ :.,+8join
++ j9J
+  :.,+2join
+  j3J
+  :.,+2join
+***************
+*** 132,137 ****
+--- 135,158 ----
+   * Make sure the previous comment leader is not removed.
+   */
+  
++ /* List:
++  * - item1
++  *   foo bar baz
++  *   foo bar baz
++  * - item2
++  *   foo bar baz
++  *   foo bar baz
++  */
++ 
++ /* List:
++  * - item1
++  *   foo bar baz
++  *   foo bar baz
++  * - item2
++  *   foo bar baz
++  *   foo bar baz
++  */
++ 
+  // Should the next comment leader be left alone?
+  // Yes.
+  
+*** ../vim-7.3.549/src/testdir/test29.ok	2012-06-06 16:12:54.000000000 +0200
+--- src/testdir/test29.ok	2012-06-13 13:48:26.000000000 +0200
+***************
+*** 66,71 ****
+--- 66,73 ----
+  {
+  /* Make sure the previous comment leader is not removed.  */
+  /* Make sure the previous comment leader is not removed.  */
++ /* List: item1 foo bar baz foo bar baz item2 foo bar baz foo bar baz */
++ /* List: item1 foo bar baz foo bar baz item2 foo bar baz foo bar baz */
+  // Should the next comment leader be left alone?  Yes.
+  // Should the next comment leader be left alone?  Yes.
+  /* Here the comment leader should be left intact. */ // And so should this one.
+*** ../vim-7.3.549/src/version.c	2012-06-13 13:40:45.000000000 +0200
+--- src/version.c	2012-06-13 13:50:23.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     550,
+  /**/
+
+-- 
+If you put 7 of the most talented OSS developers in a room for a week
+and asked them to fix a bug in a spreadsheet program, in 1 week
+you'd have 2 new mail readers and a text-based web browser.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.551 b/source/ap/vim/patches/7.3.551
new file mode 100644
index 00000000..db8dbac7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.551
@@ -0,0 +1,494 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.551
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.551
+Problem:    When using :tablose a TabEnter autocommand is triggered too early.
+	    (Karthick)
+Solution:   Don't trigger *Enter autocommands before closing the tab.
+	    (Christian Brabandt)
+Files:	    src/buffer.c, src/eval.c, src/ex_cmds2.c, src/fileio.c,
+	    src/proto/window.pro, src/window.c
+
+
+*** ../vim-7.3.550/src/buffer.c	2012-06-06 19:02:40.000000000 +0200
+--- src/buffer.c	2012-06-13 14:18:58.000000000 +0200
+***************
+*** 4470,4476 ****
+       * When the ":tab" modifier was used do this for all tab pages.
+       */
+      if (had_tab > 0)
+! 	goto_tabpage_tp(first_tabpage);
+      for (;;)
+      {
+  	tpnext = curtab->tp_next;
+--- 4470,4476 ----
+       * When the ":tab" modifier was used do this for all tab pages.
+       */
+      if (had_tab > 0)
+! 	goto_tabpage_tp(first_tabpage, TRUE);
+      for (;;)
+      {
+  	tpnext = curtab->tp_next;
+***************
+*** 4582,4588 ****
+  	if (!valid_tabpage(tpnext))
+  	    tpnext = first_tabpage;	/* start all over...*/
+  # endif
+! 	goto_tabpage_tp(tpnext);
+      }
+  
+      /*
+--- 4582,4588 ----
+  	if (!valid_tabpage(tpnext))
+  	    tpnext = first_tabpage;	/* start all over...*/
+  # endif
+! 	goto_tabpage_tp(tpnext, TRUE);
+      }
+  
+      /*
+***************
+*** 4686,4698 ****
+      if (last_curtab != new_curtab)
+      {
+  	if (valid_tabpage(last_curtab))
+! 	    goto_tabpage_tp(last_curtab);
+  	if (win_valid(last_curwin))
+  	    win_enter(last_curwin, FALSE);
+      }
+      /* to window with first arg */
+      if (valid_tabpage(new_curtab))
+! 	goto_tabpage_tp(new_curtab);
+      if (win_valid(new_curwin))
+  	win_enter(new_curwin, FALSE);
+  
+--- 4686,4698 ----
+      if (last_curtab != new_curtab)
+      {
+  	if (valid_tabpage(last_curtab))
+! 	    goto_tabpage_tp(last_curtab, TRUE);
+  	if (win_valid(last_curwin))
+  	    win_enter(last_curwin, FALSE);
+      }
+      /* to window with first arg */
+      if (valid_tabpage(new_curtab))
+! 	goto_tabpage_tp(new_curtab, TRUE);
+      if (win_valid(new_curwin))
+  	win_enter(new_curwin, FALSE);
+  
+***************
+*** 4744,4750 ****
+       */
+  #ifdef FEAT_WINDOWS
+      if (had_tab > 0)
+! 	goto_tabpage_tp(first_tabpage);
+      for (;;)
+      {
+  #endif
+--- 4744,4750 ----
+       */
+  #ifdef FEAT_WINDOWS
+      if (had_tab > 0)
+! 	goto_tabpage_tp(first_tabpage, TRUE);
+      for (;;)
+      {
+  #endif
+***************
+*** 4784,4790 ****
+  	/* Without the ":tab" modifier only do the current tab page. */
+  	if (had_tab == 0 || tpnext == NULL)
+  	    break;
+! 	goto_tabpage_tp(tpnext);
+      }
+  #endif
+  
+--- 4784,4790 ----
+  	/* Without the ":tab" modifier only do the current tab page. */
+  	if (had_tab == 0 || tpnext == NULL)
+  	    break;
+! 	goto_tabpage_tp(tpnext, TRUE);
+      }
+  #endif
+  
+*** ../vim-7.3.550/src/eval.c	2012-06-06 16:29:06.000000000 +0200
+--- src/eval.c	2012-06-13 14:18:58.000000000 +0200
+***************
+*** 16415,16421 ****
+      if (tp != NULL && varname != NULL && varp != NULL)
+      {
+  	save_curtab = curtab;
+! 	goto_tabpage_tp(tp);
+  
+  	tabvarname = alloc((unsigned)STRLEN(varname) + 3);
+  	if (tabvarname != NULL)
+--- 16415,16421 ----
+      if (tp != NULL && varname != NULL && varp != NULL)
+      {
+  	save_curtab = curtab;
+! 	goto_tabpage_tp(tp, TRUE);
+  
+  	tabvarname = alloc((unsigned)STRLEN(varname) + 3);
+  	if (tabvarname != NULL)
+***************
+*** 16428,16434 ****
+  
+  	/* Restore current tabpage */
+  	if (valid_tabpage(save_curtab))
+! 	    goto_tabpage_tp(save_curtab);
+      }
+  }
+  
+--- 16428,16434 ----
+  
+  	/* Restore current tabpage */
+  	if (valid_tabpage(save_curtab))
+! 	    goto_tabpage_tp(save_curtab, TRUE);
+      }
+  }
+  
+***************
+*** 16492,16498 ****
+  	/* set curwin to be our win, temporarily */
+  	save_curwin = curwin;
+  	save_curtab = curtab;
+! 	goto_tabpage_tp(tp);
+  	if (!win_valid(win))
+  	    return;
+  	curwin = win;
+--- 16492,16498 ----
+  	/* set curwin to be our win, temporarily */
+  	save_curwin = curwin;
+  	save_curtab = curtab;
+! 	goto_tabpage_tp(tp, TRUE);
+  	if (!win_valid(win))
+  	    return;
+  	curwin = win;
+***************
+*** 16527,16533 ****
+  	/* Restore current tabpage and window, if still valid (autocomands can
+  	 * make them invalid). */
+  	if (valid_tabpage(save_curtab))
+! 	    goto_tabpage_tp(save_curtab);
+  	if (win_valid(save_curwin))
+  	{
+  	    curwin = save_curwin;
+--- 16527,16533 ----
+  	/* Restore current tabpage and window, if still valid (autocomands can
+  	 * make them invalid). */
+  	if (valid_tabpage(save_curtab))
+! 	    goto_tabpage_tp(save_curtab, TRUE);
+  	if (win_valid(save_curwin))
+  	{
+  	    curwin = save_curwin;
+*** ../vim-7.3.550/src/ex_cmds2.c	2012-04-25 17:32:14.000000000 +0200
+--- src/ex_cmds2.c	2012-06-13 14:18:58.000000000 +0200
+***************
+*** 2476,2482 ****
+  		/* go to window "tp" */
+  		if (!valid_tabpage(tp))
+  		    break;
+! 		goto_tabpage_tp(tp);
+  		tp = tp->tp_next;
+  	    }
+  #endif
+--- 2476,2482 ----
+  		/* go to window "tp" */
+  		if (!valid_tabpage(tp))
+  		    break;
+! 		goto_tabpage_tp(tp, TRUE);
+  		tp = tp->tp_next;
+  	    }
+  #endif
+*** ../vim-7.3.550/src/fileio.c	2012-06-06 18:03:01.000000000 +0200
+--- src/fileio.c	2012-06-13 14:18:58.000000000 +0200
+***************
+*** 8918,8924 ****
+  		if (wp == aucmd_win)
+  		{
+  		    if (tp != curtab)
+! 			goto_tabpage_tp(tp);
+  		    win_goto(aucmd_win);
+  		    goto win_found;
+  		}
+--- 8918,8924 ----
+  		if (wp == aucmd_win)
+  		{
+  		    if (tp != curtab)
+! 			goto_tabpage_tp(tp, TRUE);
+  		    win_goto(aucmd_win);
+  		    goto win_found;
+  		}
+*** ../vim-7.3.550/src/proto/window.pro	2012-02-22 14:58:24.000000000 +0100
+--- src/proto/window.pro	2012-06-13 14:23:06.000000000 +0200
+***************
+*** 27,33 ****
+  tabpage_T *find_tabpage __ARGS((int n));
+  int tabpage_index __ARGS((tabpage_T *ftp));
+  void goto_tabpage __ARGS((int n));
+! void goto_tabpage_tp __ARGS((tabpage_T *tp));
+  void goto_tabpage_win __ARGS((tabpage_T *tp, win_T *wp));
+  void tabpage_move __ARGS((int nr));
+  void win_goto __ARGS((win_T *wp));
+--- 27,33 ----
+  tabpage_T *find_tabpage __ARGS((int n));
+  int tabpage_index __ARGS((tabpage_T *ftp));
+  void goto_tabpage __ARGS((int n));
+! void goto_tabpage_tp __ARGS((tabpage_T *tp, int trigger_autocmds));
+  void goto_tabpage_win __ARGS((tabpage_T *tp, win_T *wp));
+  void tabpage_move __ARGS((int nr));
+  void win_goto __ARGS((win_T *wp));
+*** ../vim-7.3.550/src/window.c	2012-06-06 19:02:40.000000000 +0200
+--- src/window.c	2012-06-13 14:24:38.000000000 +0200
+***************
+*** 45,51 ****
+  #if defined(FEAT_WINDOWS) || defined(PROTO)
+  static tabpage_T *alloc_tabpage __ARGS((void));
+  static int leave_tabpage __ARGS((buf_T *new_curbuf));
+! static void enter_tabpage __ARGS((tabpage_T *tp, buf_T *old_curbuf));
+  static void frame_fix_height __ARGS((win_T *wp));
+  static int frame_minheight __ARGS((frame_T *topfrp, win_T *next_curwin));
+  static void win_enter_ext __ARGS((win_T *wp, int undo_sync, int no_curwin));
+--- 45,51 ----
+  #if defined(FEAT_WINDOWS) || defined(PROTO)
+  static tabpage_T *alloc_tabpage __ARGS((void));
+  static int leave_tabpage __ARGS((buf_T *new_curbuf));
+! static void enter_tabpage __ARGS((tabpage_T *tp, buf_T *old_curbuf, int trigger_autocmds));
+  static void frame_fix_height __ARGS((win_T *wp));
+  static int frame_minheight __ARGS((frame_T *topfrp, win_T *next_curwin));
+  static void win_enter_ext __ARGS((win_T *wp, int undo_sync, int no_curwin));
+***************
+*** 355,365 ****
+  						     && valid_tabpage(oldtab))
+  		    {
+  			newtab = curtab;
+! 			goto_tabpage_tp(oldtab);
+  			if (curwin == wp)
+  			    win_close(curwin, FALSE);
+  			if (valid_tabpage(newtab))
+! 			    goto_tabpage_tp(newtab);
+  		    }
+  		}
+  		break;
+--- 355,365 ----
+  						     && valid_tabpage(oldtab))
+  		    {
+  			newtab = curtab;
+! 			goto_tabpage_tp(oldtab, TRUE);
+  			if (curwin == wp)
+  			    win_close(curwin, FALSE);
+  			if (valid_tabpage(newtab))
+! 			    goto_tabpage_tp(newtab, TRUE);
+  		    }
+  		}
+  		break;
+***************
+*** 2130,2137 ****
+  	 * page and then close the window and the tab page.  This avoids that
+  	 * curwin and curtab are invalid while we are freeing memory, they may
+  	 * be used in GUI events.
+  	 */
+! 	goto_tabpage_tp(alt_tabpage());
+  	redraw_tabline = TRUE;
+  
+  	/* Safety check: Autocommands may have closed the window when jumping
+--- 2130,2139 ----
+  	 * page and then close the window and the tab page.  This avoids that
+  	 * curwin and curtab are invalid while we are freeing memory, they may
+  	 * be used in GUI events.
++ 	 * Don't trigger autocommands yet, they may use wrong values, so do
++ 	 * that below.
+  	 */
+! 	goto_tabpage_tp(alt_tabpage(), FALSE);
+  	redraw_tabline = TRUE;
+  
+  	/* Safety check: Autocommands may have closed the window when jumping
+***************
+*** 2144,2149 ****
+--- 2146,2157 ----
+  	    if (h != tabline_height())
+  		shell_new_rows();
+  	}
++ 	/* Since goto_tabpage_tp above did not trigger *Enter autocommands, do
++ 	 * that now. */
++ #ifdef FEAT_AUTOCMD
++ 	apply_autocmds(EVENT_TABENTER, NULL, NULL, FALSE, curbuf);
++ 	apply_autocmds(EVENT_WINENTER, NULL, NULL, FALSE, curbuf);
++ #endif
+  	return TRUE;
+      }
+      return FALSE;
+***************
+*** 3556,3562 ****
+      }
+  
+      /* Failed, get back the previous Tab page */
+!     enter_tabpage(curtab, curbuf);
+      return FAIL;
+  }
+  
+--- 3564,3570 ----
+      }
+  
+      /* Failed, get back the previous Tab page */
+!     enter_tabpage(curtab, curbuf, TRUE);
+      return FAIL;
+  }
+  
+***************
+*** 3709,3719 ****
+  /*
+   * Start using tab page "tp".
+   * Only to be used after leave_tabpage() or freeing the current tab page.
+   */
+      static void
+! enter_tabpage(tp, old_curbuf)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+--- 3717,3729 ----
+  /*
+   * Start using tab page "tp".
+   * Only to be used after leave_tabpage() or freeing the current tab page.
++  * Only trigger *Enter autocommands when trigger_autocmds is TRUE.
+   */
+      static void
+! enter_tabpage(tp, old_curbuf, trigger_autocmds)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
++     int         trigger_autocmds;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+***************
+*** 3761,3769 ****
+  #ifdef FEAT_AUTOCMD
+      /* Apply autocommands after updating the display, when 'rows' and
+       * 'columns' have been set correctly. */
+!     apply_autocmds(EVENT_TABENTER, NULL, NULL, FALSE, curbuf);
+!     if (old_curbuf != curbuf)
+! 	apply_autocmds(EVENT_BUFENTER, NULL, NULL, FALSE, curbuf);
+  #endif
+  
+      redraw_all_later(CLEAR);
+--- 3771,3782 ----
+  #ifdef FEAT_AUTOCMD
+      /* Apply autocommands after updating the display, when 'rows' and
+       * 'columns' have been set correctly. */
+!     if (trigger_autocmds)
+!     {
+! 	apply_autocmds(EVENT_TABENTER, NULL, NULL, FALSE, curbuf);
+! 	if (old_curbuf != curbuf)
+! 	    apply_autocmds(EVENT_BUFENTER, NULL, NULL, FALSE, curbuf);
+!     }
+  #endif
+  
+      redraw_all_later(CLEAR);
+***************
+*** 3839,3845 ****
+  	}
+      }
+  
+!     goto_tabpage_tp(tp);
+  
+  #ifdef FEAT_GUI_TABLINE
+      if (gui_use_tabline())
+--- 3852,3858 ----
+  	}
+      }
+  
+!     goto_tabpage_tp(tp, TRUE);
+  
+  #ifdef FEAT_GUI_TABLINE
+      if (gui_use_tabline())
+***************
+*** 3849,3859 ****
+  
+  /*
+   * Go to tabpage "tp".
+   * Note: doesn't update the GUI tab.
+   */
+      void
+! goto_tabpage_tp(tp)
+      tabpage_T	*tp;
+  {
+      /* Don't repeat a message in another tab page. */
+      set_keep_msg(NULL, 0);
+--- 3862,3874 ----
+  
+  /*
+   * Go to tabpage "tp".
++  * Only trigger *Enter autocommands when trigger_autocmds is TRUE.
+   * Note: doesn't update the GUI tab.
+   */
+      void
+! goto_tabpage_tp(tp, trigger_autocmds)
+      tabpage_T	*tp;
++     int         trigger_autocmds;
+  {
+      /* Don't repeat a message in another tab page. */
+      set_keep_msg(NULL, 0);
+***************
+*** 3861,3869 ****
+      if (tp != curtab && leave_tabpage(tp->tp_curwin->w_buffer) == OK)
+      {
+  	if (valid_tabpage(tp))
+! 	    enter_tabpage(tp, curbuf);
+  	else
+! 	    enter_tabpage(curtab, curbuf);
+      }
+  }
+  
+--- 3876,3884 ----
+      if (tp != curtab && leave_tabpage(tp->tp_curwin->w_buffer) == OK)
+      {
+  	if (valid_tabpage(tp))
+! 	    enter_tabpage(tp, curbuf, trigger_autocmds);
+  	else
+! 	    enter_tabpage(curtab, curbuf, trigger_autocmds);
+      }
+  }
+  
+***************
+*** 3876,3882 ****
+      tabpage_T	*tp;
+      win_T	*wp;
+  {
+!     goto_tabpage_tp(tp);
+      if (curtab == tp && win_valid(wp))
+      {
+  	win_enter(wp, TRUE);
+--- 3891,3897 ----
+      tabpage_T	*tp;
+      win_T	*wp;
+  {
+!     goto_tabpage_tp(tp, TRUE);
+      if (curtab == tp && win_valid(wp))
+      {
+  	win_enter(wp, TRUE);
+*** ../vim-7.3.550/src/version.c	2012-06-13 14:01:36.000000000 +0200
+--- src/version.c	2012-06-13 14:28:00.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     551,
+  /**/
+
+-- 
+Give a man a computer program and you give him a headache,
+but teach him to program computers and you give him the power
+to create headaches for others for the rest of his life...
+        R. B. Forest
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.552 b/source/ap/vim/patches/7.3.552
new file mode 100644
index 00000000..e9a560ec
--- /dev/null
+++ b/source/ap/vim/patches/7.3.552
@@ -0,0 +1,582 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.552
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.552
+Problem:    Formatting inside comments does not use the "2" flag in
+	    'formatoptions'.
+Solution:   Support the "2" flag.  (Tor Perkins)
+Files:	    src/vim.h, src/ops.c, src/edit.c, src/misc1.c,
+	    src/testdir/test68.in, src/testdir/test68.ok
+
+
+*** ../vim-7.3.551/src/vim.h	2012-06-06 18:03:01.000000000 +0200
+--- src/vim.h	2012-06-13 16:07:27.000000000 +0200
+***************
+*** 1072,1083 ****
+--- 1072,1085 ----
+  #define INSCHAR_DO_COM	2	/* format comments */
+  #define INSCHAR_CTRLV	4	/* char typed just after CTRL-V */
+  #define INSCHAR_NO_FEX	8	/* don't use 'formatexpr' */
++ #define INSCHAR_COM_LIST 16	/* format comments with list/2nd line indent */
+  
+  /* flags for open_line() */
+  #define OPENLINE_DELSPACES  1	/* delete spaces after cursor */
+  #define OPENLINE_DO_COM	    2	/* format comments */
+  #define OPENLINE_KEEPTRAIL  4	/* keep trailing spaces */
+  #define OPENLINE_MARKFIX    8	/* fix mark positions */
++ #define OPENLINE_COM_LIST  16	/* format comments with list/2nd line indent */
+  
+  /*
+   * There are four history tables:
+*** ../vim-7.3.551/src/ops.c	2012-06-13 14:01:36.000000000 +0200
+--- src/ops.c	2012-06-13 16:53:44.000000000 +0200
+***************
+*** 1727,1734 ****
+  	 * and the delete is within one line. */
+  	if ((
+  #ifdef FEAT_CLIPBOARD
+!             ((clip_unnamed & CLIP_UNNAMED) && oap->regname == '*') ||
+!             ((clip_unnamed & CLIP_UNNAMED_PLUS) && oap->regname == '+') ||
+  #endif
+  	    oap->regname == 0) && oap->motion_type != MLINE
+  						      && oap->line_count == 1)
+--- 1727,1734 ----
+  	 * and the delete is within one line. */
+  	if ((
+  #ifdef FEAT_CLIPBOARD
+! 	    ((clip_unnamed & CLIP_UNNAMED) && oap->regname == '*') ||
+! 	    ((clip_unnamed & CLIP_UNNAMED_PLUS) && oap->regname == '+') ||
+  #endif
+  	    oap->regname == 0) && oap->motion_type != MLINE
+  						      && oap->line_count == 1)
+***************
+*** 4208,4217 ****
+   * "is_comment".
+   * line - line to be processed,
+   * process - if FALSE, will only check whether the line ends with an unclosed
+!  *           comment,
+   * include_space - whether to also skip space following the comment leader,
+   * is_comment - will indicate whether the current line ends with an unclosed
+!  *              comment.
+   */
+      static char_u *
+  skip_comment(line, process, include_space, is_comment)
+--- 4208,4217 ----
+   * "is_comment".
+   * line - line to be processed,
+   * process - if FALSE, will only check whether the line ends with an unclosed
+!  *	     comment,
+   * include_space - whether to also skip space following the comment leader,
+   * is_comment - will indicate whether the current line ends with an unclosed
+!  *		comment.
+   */
+      static char_u *
+  skip_comment(line, process, include_space, is_comment)
+***************
+*** 4723,4731 ****
+      char_u	*leader_flags = NULL;	/* flags for leader of current line */
+      char_u	*next_leader_flags;	/* flags for leader of next line */
+      int		do_comments;		/* format comments */
+  #endif
+      int		advance = TRUE;
+!     int		second_indent = -1;
+      int		do_second_indent;
+      int		do_number_indent;
+      int		do_trail_white;
+--- 4723,4733 ----
+      char_u	*leader_flags = NULL;	/* flags for leader of current line */
+      char_u	*next_leader_flags;	/* flags for leader of next line */
+      int		do_comments;		/* format comments */
++     int		do_comments_list = 0;	/* format comments with 'n' or '2' */
+  #endif
+      int		advance = TRUE;
+!     int		second_indent = -1;	/* indent for second line (comment
+! 					 * aware) */
+      int		do_second_indent;
+      int		do_number_indent;
+      int		do_trail_white;
+***************
+*** 4828,4845 ****
+  	    if (first_par_line
+  		    && (do_second_indent || do_number_indent)
+  		    && prev_is_end_par
+! 		    && curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count
+  #ifdef FEAT_COMMENTS
+! 		    && leader_len == 0
+! 		    && next_leader_len == 0
+  #endif
+! 		    )
+! 	    {
+! 		if (do_second_indent
+! 			&& !lineempty(curwin->w_cursor.lnum + 1))
+! 		    second_indent = get_indent_lnum(curwin->w_cursor.lnum + 1);
+  		else if (do_number_indent)
+! 		    second_indent = get_number_indent(curwin->w_cursor.lnum);
+  	    }
+  
+  	    /*
+--- 4830,4875 ----
+  	    if (first_par_line
+  		    && (do_second_indent || do_number_indent)
+  		    && prev_is_end_par
+! 		    && curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
+! 	    {
+! 		if (do_second_indent && !lineempty(curwin->w_cursor.lnum + 1))
+! 		{
+  #ifdef FEAT_COMMENTS
+! 		    if (leader_len == 0 && next_leader_len == 0)
+! 		    {
+! 			/* no comment found */
+  #endif
+! 			second_indent =
+! 				   get_indent_lnum(curwin->w_cursor.lnum + 1);
+! #ifdef FEAT_COMMENTS
+! 		    }
+! 		    else
+! 		    {
+! 			second_indent = next_leader_len;
+! 			do_comments_list = 1;
+! 		    }
+! #endif
+! 		}
+  		else if (do_number_indent)
+! 		{
+! #ifdef FEAT_COMMENTS
+! 		    if (leader_len == 0 && next_leader_len == 0)
+! 		    {
+! 			/* no comment found */
+! #endif
+! 			second_indent =
+! 				     get_number_indent(curwin->w_cursor.lnum);
+! #ifdef FEAT_COMMENTS
+! 		    }
+! 		    else
+! 		    {
+! 			/* get_number_indent() is now "comment aware"... */
+! 			second_indent =
+! 				     get_number_indent(curwin->w_cursor.lnum);
+! 			do_comments_list = 1;
+! 		    }
+! #endif
+! 		}
+  	    }
+  
+  	    /*
+***************
+*** 4878,4883 ****
+--- 4908,4915 ----
+  		insertchar(NUL, INSCHAR_FORMAT
+  #ifdef FEAT_COMMENTS
+  			+ (do_comments ? INSCHAR_DO_COM : 0)
++ 			+ (do_comments && do_comments_list
++ 						       ? INSCHAR_COM_LIST : 0)
+  #endif
+  			+ (avoid_fex ? INSCHAR_NO_FEX : 0), second_indent);
+  		State = old_State;
+*** ../vim-7.3.551/src/edit.c	2012-06-06 16:12:54.000000000 +0200
+--- src/edit.c	2012-06-13 16:54:10.000000000 +0200
+***************
+*** 1463,1469 ****
+  			 * what check_abbr() expects. */
+  			(has_mbyte && c >= 0x100) ? (c + ABBR_OFF) :
+  #endif
+!                        c) && c != Ctrl_RSB))
+  	    {
+  		insert_special(c, FALSE, FALSE);
+  #ifdef FEAT_RIGHTLEFT
+--- 1463,1469 ----
+  			 * what check_abbr() expects. */
+  			(has_mbyte && c >= 0x100) ? (c + ABBR_OFF) :
+  #endif
+! 		       c) && c != Ctrl_RSB))
+  	    {
+  		insert_special(c, FALSE, FALSE);
+  #ifdef FEAT_RIGHTLEFT
+***************
+*** 5769,5774 ****
+--- 5769,5784 ----
+  # define WHITECHAR(cc) vim_iswhite(cc)
+  #endif
+  
++ /*
++  * "flags": INSCHAR_FORMAT - force formatting
++  *	    INSCHAR_CTRLV  - char typed just after CTRL-V
++  *	    INSCHAR_NO_FEX - don't use 'formatexpr'
++  *
++  *   NOTE: passes the flags value straight through to internal_format() which,
++  *	   beside INSCHAR_FORMAT (above), is also looking for these:
++  *	    INSCHAR_DO_COM   - format comments
++  *	    INSCHAR_COM_LIST - format comments with num list or 2nd line indent
++  */
+      void
+  insertchar(c, flags, second_indent)
+      int		c;			/* character to insert or NUL */
+***************
+*** 6011,6016 ****
+--- 6021,6029 ----
+  
+  /*
+   * Format text at the current insert position.
++  *
++  * If the INSCHAR_COM_LIST flag is present, then the value of second_indent
++  * will be the comment leader length sent to open_line().
+   */
+      static void
+  internal_format(textwidth, second_indent, flags, format_only, c)
+***************
+*** 6289,6311 ****
+  		+ (fo_white_par ? OPENLINE_KEEPTRAIL : 0)
+  #ifdef FEAT_COMMENTS
+  		+ (do_comments ? OPENLINE_DO_COM : 0)
+  #endif
+! 		, old_indent);
+! 	old_indent = 0;
+  
+  	replace_offset = 0;
+  	if (first_line)
+  	{
+! 	    if (second_indent < 0 && has_format_option(FO_Q_NUMBER))
+! 		second_indent = get_number_indent(curwin->w_cursor.lnum -1);
+! 	    if (second_indent >= 0)
+  	    {
+  #ifdef FEAT_VREPLACE
+! 		if (State & VREPLACE_FLAG)
+! 		    change_indent(INDENT_SET, second_indent, FALSE, NUL, TRUE);
+! 		else
+  #endif
+! 		    (void)set_indent(second_indent, SIN_CHANGED);
+  	    }
+  	    first_line = FALSE;
+  	}
+--- 6302,6337 ----
+  		+ (fo_white_par ? OPENLINE_KEEPTRAIL : 0)
+  #ifdef FEAT_COMMENTS
+  		+ (do_comments ? OPENLINE_DO_COM : 0)
++ 		+ ((flags & INSCHAR_COM_LIST) ? OPENLINE_COM_LIST : 0)
+  #endif
+! 		, ((flags & INSCHAR_COM_LIST) ? second_indent : old_indent));
+! 	if (!(flags & INSCHAR_COM_LIST))
+! 	    old_indent = 0;
+  
+  	replace_offset = 0;
+  	if (first_line)
+  	{
+! 	    if (!(flags & INSCHAR_COM_LIST))
+  	    {
++ 		/*
++ 		 * This section is for numeric lists w/o comments.  If comment
++ 		 * indents are needed with numeric lists (formatoptions=nq),
++ 		 * then the INSCHAR_COM_LIST flag will cause the corresponding
++ 		 * OPENLINE_COM_LIST flag to be passed through to open_line()
++ 		 * (as seen above)...
++ 		 */
++ 		if (second_indent < 0 && has_format_option(FO_Q_NUMBER))
++ 		    second_indent = get_number_indent(curwin->w_cursor.lnum -1);
++ 		if (second_indent >= 0)
++ 		{
+  #ifdef FEAT_VREPLACE
+! 		    if (State & VREPLACE_FLAG)
+! 			change_indent(INDENT_SET, second_indent,
+! 							    FALSE, NUL, TRUE);
+! 		    else
+  #endif
+! 			(void)set_indent(second_indent, SIN_CHANGED);
+! 		}
+  	    }
+  	    first_line = FALSE;
+  	}
+*** ../vim-7.3.551/src/misc1.c	2012-06-13 13:40:45.000000000 +0200
+--- src/misc1.c	2012-06-13 16:54:59.000000000 +0200
+***************
+*** 423,449 ****
+  {
+      colnr_T	col;
+      pos_T	pos;
+-     regmmatch_T	regmatch;
+  
+      if (lnum > curbuf->b_ml.ml_line_count)
+  	return -1;
+      pos.lnum = 0;
+!     regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
+!     if (regmatch.regprog != NULL)
+      {
+! 	regmatch.rmm_ic = FALSE;
+! 	regmatch.rmm_maxcol = 0;
+! 	if (vim_regexec_multi(&regmatch, curwin, curbuf, lnum,
+! 							    (colnr_T)0, NULL))
+  	{
+! 	    pos.lnum = regmatch.endpos[0].lnum + lnum;
+! 	    pos.col = regmatch.endpos[0].col;
+  #ifdef FEAT_VIRTUALEDIT
+! 	    pos.coladd = 0;
+  #endif
+  	}
+  	vim_free(regmatch.regprog);
+      }
+  
+      if (pos.lnum == 0 || *ml_get_pos(&pos) == NUL)
+  	return -1;
+--- 423,492 ----
+  {
+      colnr_T	col;
+      pos_T	pos;
+  
+      if (lnum > curbuf->b_ml.ml_line_count)
+  	return -1;
+      pos.lnum = 0;
+! 
+! #ifdef FEAT_COMMENTS
+!     if (has_format_option(FO_Q_COMS) && has_format_option(FO_Q_NUMBER))
+      {
+! 	regmatch_T  regmatch;
+! 	int	    lead_len;	      /* length of comment leader */
+! 
+! 	lead_len = get_leader_len(ml_get(lnum), NULL, FALSE, TRUE);
+! 	regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
+! 	if (regmatch.regprog != NULL)
+  	{
+! 	    regmatch.rm_ic = FALSE;
+! 
+! 	    /* vim_regexec() expects a pointer to a line.  This lets us
+! 	     * start matching for the flp beyond any comment leader...  */
+! 	    if (vim_regexec(&regmatch, ml_get(lnum) + lead_len, (colnr_T)0))
+! 	    {
+! 		pos.lnum = lnum;
+! 		pos.col  = *regmatch.endp - (ml_get(lnum) + lead_len);
+! 		pos.col += lead_len;
+  #ifdef FEAT_VIRTUALEDIT
+! 		pos.coladd = 0;
+  #endif
++ 	    }
+  	}
+  	vim_free(regmatch.regprog);
+      }
++     else
++     {
++ 	/*
++ 	 * What follows is the orig code that is not "comment aware"...
++ 	 *
++ 	 * I'm not sure if regmmatch_T (multi-match) is needed in this case.
++ 	 * It may be true that this section would work properly using the
++ 	 * regmatch_T code above, in which case, these two seperate sections
++ 	 * should be consolidated w/ FEAT_COMMENTS making lead_len > 0...
++ 	 */
++ #endif
++ 	regmmatch_T  regmatch;
++ 
++ 	regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
++ 
++ 	if (regmatch.regprog != NULL)
++ 	{
++ 	    regmatch.rmm_ic = FALSE;
++ 	    regmatch.rmm_maxcol = 0;
++ 	    if (vim_regexec_multi(&regmatch, curwin, curbuf,
++ 						      lnum, (colnr_T)0, NULL))
++ 	    {
++ 		pos.lnum = regmatch.endpos[0].lnum + lnum;
++ 		pos.col = regmatch.endpos[0].col;
++ #ifdef FEAT_VIRTUALEDIT
++ 		pos.coladd = 0;
++ #endif
++ 	    }
++ 	    vim_free(regmatch.regprog);
++ 	}
++ #ifdef FEAT_COMMENTS
++     }
++ #endif
+  
+      if (pos.lnum == 0 || *ml_get_pos(&pos) == NUL)
+  	return -1;
+***************
+*** 502,515 ****
+   *	    OPENLINE_DO_COM	format comments
+   *	    OPENLINE_KEEPTRAIL	keep trailing spaces
+   *	    OPENLINE_MARKFIX	adjust mark positions after the line break
+   *
+   * Return TRUE for success, FALSE for failure
+   */
+      int
+! open_line(dir, flags, old_indent)
+      int		dir;		/* FORWARD or BACKWARD */
+      int		flags;
+!     int		old_indent;	/* indent for after ^^D in Insert mode */
+  {
+      char_u	*saved_line;		/* copy of the original line */
+      char_u	*next_line = NULL;	/* copy of the next line */
+--- 545,562 ----
+   *	    OPENLINE_DO_COM	format comments
+   *	    OPENLINE_KEEPTRAIL	keep trailing spaces
+   *	    OPENLINE_MARKFIX	adjust mark positions after the line break
++  *	    OPENLINE_COM_LIST	format comments with list or 2nd line indent
++  *
++  * "second_line_indent": indent for after ^^D in Insert mode or if flag
++  *			  OPENLINE_COM_LIST
+   *
+   * Return TRUE for success, FALSE for failure
+   */
+      int
+! open_line(dir, flags, second_line_indent)
+      int		dir;		/* FORWARD or BACKWARD */
+      int		flags;
+!     int		second_line_indent;
+  {
+      char_u	*saved_line;		/* copy of the original line */
+      char_u	*next_line = NULL;	/* copy of the next line */
+***************
+*** 650,657 ****
+  	 * count white space on current line
+  	 */
+  	newindent = get_indent_str(saved_line, (int)curbuf->b_p_ts);
+! 	if (newindent == 0)
+! 	    newindent = old_indent;	/* for ^^D command in insert mode */
+  
+  #ifdef FEAT_SMARTINDENT
+  	/*
+--- 697,704 ----
+  	 * count white space on current line
+  	 */
+  	newindent = get_indent_str(saved_line, (int)curbuf->b_p_ts);
+! 	if (newindent == 0 && !(flags & OPENLINE_COM_LIST))
+! 	    newindent = second_line_indent; /* for ^^D command in insert mode */
+  
+  #ifdef FEAT_SMARTINDENT
+  	/*
+***************
+*** 1008,1015 ****
+  	if (lead_len)
+  	{
+  	    /* allocate buffer (may concatenate p_exta later) */
+! 	    leader = alloc(lead_len + lead_repl_len + extra_space +
+! 							      extra_len + 1);
+  	    allocated = leader;		    /* remember to free it later */
+  
+  	    if (leader == NULL)
+--- 1055,1062 ----
+  	if (lead_len)
+  	{
+  	    /* allocate buffer (may concatenate p_exta later) */
+! 	    leader = alloc(lead_len + lead_repl_len + extra_space + extra_len
+! 			 + (second_line_indent > 0 ? second_line_indent : 0));
+  	    allocated = leader;		    /* remember to free it later */
+  
+  	    if (leader == NULL)
+***************
+*** 1304,1309 ****
+--- 1351,1370 ----
+      /* concatenate leader and p_extra, if there is a leader */
+      if (lead_len)
+      {
++ 	if (flags & OPENLINE_COM_LIST && second_line_indent > 0)
++ 	{
++ 	    int i;
++ 	    int padding = second_line_indent - (newindent + STRLEN(leader));
++ 
++ 	    /* Here whitespace is inserted after the comment char.
++ 	     * Below, set_indent(newindent, SIN_INSERT) will insert the
++ 	     * whitespace needed before the comment char. */
++ 	    for (i = 0; i < padding; i++)
++ 	    {
++ 		STRCAT(leader, " ");
++ 		newcol++;
++ 	    }
++ 	}
+  	STRCAT(leader, p_extra);
+  	p_extra = leader;
+  	did_ai = TRUE;	    /* So truncating blanks works with comments */
+***************
+*** 4966,4973 ****
+      char_u  *
+  FullName_save(fname, force)
+      char_u	*fname;
+!     int		force;	    /* force expansion, even when it already looks
+! 			       like a full path name */
+  {
+      char_u	*buf;
+      char_u	*new_fname = NULL;
+--- 5027,5034 ----
+      char_u  *
+  FullName_save(fname, force)
+      char_u	*fname;
+!     int		force;		/* force expansion, even when it already looks
+! 				 * like a full path name */
+  {
+      char_u	*buf;
+      char_u	*new_fname = NULL;
+*** ../vim-7.3.551/src/testdir/test68.in	2010-10-09 17:21:42.000000000 +0200
+--- src/testdir/test68.in	2012-06-13 15:49:38.000000000 +0200
+***************
+*** 51,56 ****
+--- 51,77 ----
+  }
+  
+  STARTTEST
++ /^{/+1
++ :set tw=5 fo=qn comments=:#
++ gwap
++ ENDTEST
++ 
++ {
++ # 1 a b
++ }
++ 
++ STARTTEST
++ /^{/+1
++ :set tw=5 fo=q2 comments=:#
++ gwap
++ ENDTEST
++ 
++ {
++ # x
++ #   a b
++ }
++ 
++ STARTTEST
+  /^{/+2
+  :set tw& fo=a
+  I^^
+*** ../vim-7.3.551/src/testdir/test68.ok	2010-10-09 17:21:42.000000000 +0200
+--- src/testdir/test68.ok	2012-06-13 15:49:38.000000000 +0200
+***************
+*** 34,38 ****
+--- 34,50 ----
+  }
+  
+  
++ {
++ # 1 a
++ #   b
++ }
++ 
++ 
++ {
++ # x a
++ #   b
++ }
++ 
++ 
+  { 1aa ^^2bb }
+  
+*** ../vim-7.3.551/src/version.c	2012-06-13 14:28:16.000000000 +0200
+--- src/version.c	2012-06-13 16:36:14.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     552,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+31. You code your homework in HTML and give your instructor the URL.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.553 b/source/ap/vim/patches/7.3.553
new file mode 100644
index 00000000..82c757e1
--- /dev/null
+++ b/source/ap/vim/patches/7.3.553
@@ -0,0 +1,85 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.553
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.553
+Problem:    With double-width characters and 'listchars' containing "precedes"
+	    the text is displayed one cell off.
+Solution:   Check for double-width character being overwritten by the
+	    "precedes" character. (Yasuhiro Matsumoto)
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.552/src/screen.c	2012-06-06 19:05:45.000000000 +0200
+--- src/screen.c	2012-06-13 17:55:10.000000000 +0200
+***************
+*** 89,94 ****
+--- 89,97 ----
+  
+  #include "vim.h"
+  
++ #define MB_FILLER_CHAR '<'  /* character used when a double-width character
++ 			     * doesn't fit. */
++ 
+  /*
+   * The attributes that are actually active for writing to the screen.
+   */
+***************
+*** 4016,4022 ****
+  		if (n_skip > 0 && mb_l > 1 && n_extra == 0)
+  		{
+  		    n_extra = 1;
+! 		    c_extra = '<';
+  		    c = ' ';
+  		    if (area_attr == 0 && search_attr == 0)
+  		    {
+--- 4019,4025 ----
+  		if (n_skip > 0 && mb_l > 1 && n_extra == 0)
+  		{
+  		    n_extra = 1;
+! 		    c_extra = MB_FILLER_CHAR;
+  		    c = ' ';
+  		    if (area_attr == 0 && search_attr == 0)
+  		    {
+***************
+*** 4576,4581 ****
+--- 4579,4593 ----
+  	    c = lcs_prec;
+  	    lcs_prec_todo = NUL;
+  #ifdef FEAT_MBYTE
++ 	    if (has_mbyte && (*mb_char2cells)(mb_c) > 1)
++ 	    {
++ 		/* Double-width character being overwritten by the "precedes"
++ 		 * character, need to fill up half the character. */
++ 		c_extra = MB_FILLER_CHAR;
++ 		n_extra = 1;
++ 		n_attr = 2;
++ 		extra_attr = hl_attr(HLF_AT);
++ 	    }
+  	    mb_c = c;
+  	    if (enc_utf8 && (*mb_char2len)(c) > 1)
+  	    {
+*** ../vim-7.3.552/src/version.c	2012-06-13 17:28:51.000000000 +0200
+--- src/version.c	2012-06-13 17:48:45.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     553,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+32. You don't know what sex three of your closest friends are, because they
+    have neutral nicknames and you never bothered to ask.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.554 b/source/ap/vim/patches/7.3.554
new file mode 100644
index 00000000..e8d4d37a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.554
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.554
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.554 (after 7.3.551)
+Problem:    Compiler warning for unused argument.
+Solution:   Add UNUSED.
+Files:	    src/window.c
+
+
+*** ../vim-7.3.553/src/window.c	2012-06-13 14:28:16.000000000 +0200
+--- src/window.c	2012-06-13 17:46:49.000000000 +0200
+***************
+*** 3723,3729 ****
+  enter_tabpage(tp, old_curbuf, trigger_autocmds)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
+!     int         trigger_autocmds;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+--- 3723,3729 ----
+  enter_tabpage(tp, old_curbuf, trigger_autocmds)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
+!     int         trigger_autocmds UNUSED;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+*** ../vim-7.3.553/src/version.c	2012-06-13 18:06:32.000000000 +0200
+--- src/version.c	2012-06-13 18:15:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     554,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+33. You name your children Eudora, Mozilla and Dotcom.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.555 b/source/ap/vim/patches/7.3.555
new file mode 100644
index 00000000..acb68452
--- /dev/null
+++ b/source/ap/vim/patches/7.3.555
@@ -0,0 +1,232 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.555
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.555
+Problem:    Building on IBM z/OS fails.
+Solution:   Adjust configure. Use the QUOTESED value from config.mk instead of
+	    the hard coded one in Makefile. (Stephen Bovy)
+Files:	    src/configure.in, src/auto/configure, src/Makefile
+
+
+*** ../vim-7.3.554/src/configure.in	2012-02-05 22:51:27.000000000 +0100
+--- src/configure.in	2012-06-13 18:52:11.000000000 +0200
+***************
+*** 329,343 ****
+  		  echo ""
+  		  echo "------------------------------------------"
+  		  echo " On z/OS Unix, the environment variable"
+! 		  echo " __CC_${ccn}MODE must be set to \"1\"!"
+  		  echo " Do:"
+  		  echo "    export _CC_${ccn}MODE=1"
+  		  echo " and then call configure again."
+  		  echo "------------------------------------------"
+  		  exit 1
+  		fi
+! 		CFLAGS="$CFLAGS -D_ALL_SOURCE -Wc,float\\(IEEE\\)";
+!                 LDFLAGS="$LDFLAGS -Wl,EDIT=NO"
+  		AC_MSG_RESULT(yes)
+  		;;
+      *)		zOSUnix="no";
+--- 329,346 ----
+  		  echo ""
+  		  echo "------------------------------------------"
+  		  echo " On z/OS Unix, the environment variable"
+! 		  echo " _CC_${ccn}MODE must be set to \"1\"!"
+  		  echo " Do:"
+  		  echo "    export _CC_${ccn}MODE=1"
+  		  echo " and then call configure again."
+  		  echo "------------------------------------------"
+  		  exit 1
+  		fi
+! 		# Set CFLAGS for configure process.
+! 		# This will be reset later for config.mk.
+! 		# Use haltonmsg to force error for missing H files.
+! 		CFLAGS="$CFLAGS -D_ALL_SOURCE -Wc,float(ieee),haltonmsg(3296)";
+! 		LDFLAGS="$LDFLAGS -Wl,EDIT=NO"
+  		AC_MSG_RESULT(yes)
+  		;;
+      *)		zOSUnix="no";
+***************
+*** 2378,2387 ****
+  if test -z "$SKIP_MOTIF"; then
+    cppflags_save=$CPPFLAGS
+    CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+!   AC_CHECK_HEADERS(Xm/Xm.h Xm/XpmP.h Xm/JoinSideT.h Xm/TraitP.h Xm/Manager.h \
+! 		   Xm/UnhighlightT.h Xm/Notebook.h)
+  
+!   if test $ac_cv_header_Xm_XpmP_h = yes; then
+      dnl Solaris uses XpmAttributes_21, very annoying.
+      AC_MSG_CHECKING([for XpmAttributes_21 in Xm/XpmP.h])
+      AC_TRY_COMPILE([#include <Xm/XpmP.h>], [XpmAttributes_21 attr;],
+--- 2381,2395 ----
+  if test -z "$SKIP_MOTIF"; then
+    cppflags_save=$CPPFLAGS
+    CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+!   if test "$zOSUnix" = "yes"; then
+! 	xmheader="Xm/Xm.h"
+!   else
+! 	xmheader="Xm/Xm.h Xm/XpmP.h Xm/JoinSideT.h Xm/TraitP.h Xm/Manager.h
+!   	   Xm/UnhighlightT.h Xm/Notebook.h"  
+!   fi    
+!   AC_CHECK_HEADERS($xmheader)
+  
+!   if test "x$ac_cv_header_Xm_XpmP_h" = "xyes"; then
+      dnl Solaris uses XpmAttributes_21, very annoying.
+      AC_MSG_CHECKING([for XpmAttributes_21 in Xm/XpmP.h])
+      AC_TRY_COMPILE([#include <Xm/XpmP.h>], [XpmAttributes_21 attr;],
+***************
+*** 3642,3647 ****
+--- 3650,3660 ----
+  fi
+  AC_SUBST(LINK_AS_NEEDED)
+  
++ # IBM z/OS reset CFLAGS for config.mk
++ if test "$zOSUnix" = "yes"; then
++ 	CFLAGS="-D_ALL_SOURCE -Wc,float\(ieee\),dll"
++ fi
++ 
+  dnl write output files
+  AC_OUTPUT(auto/config.mk:config.mk.in)
+  
+*** ../vim-7.3.554/src/auto/configure	2012-02-05 22:51:27.000000000 +0100
+--- src/auto/configure	2012-06-13 18:53:04.000000000 +0200
+***************
+*** 4426,4440 ****
+  		  echo ""
+  		  echo "------------------------------------------"
+  		  echo " On z/OS Unix, the environment variable"
+! 		  echo " __CC_${ccn}MODE must be set to \"1\"!"
+  		  echo " Do:"
+  		  echo "    export _CC_${ccn}MODE=1"
+  		  echo " and then call configure again."
+  		  echo "------------------------------------------"
+  		  exit 1
+  		fi
+! 		CFLAGS="$CFLAGS -D_ALL_SOURCE -Wc,float\\(IEEE\\)";
+!                 LDFLAGS="$LDFLAGS -Wl,EDIT=NO"
+  		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+  $as_echo "yes" >&6; }
+  		;;
+--- 4426,4443 ----
+  		  echo ""
+  		  echo "------------------------------------------"
+  		  echo " On z/OS Unix, the environment variable"
+! 		  echo " _CC_${ccn}MODE must be set to \"1\"!"
+  		  echo " Do:"
+  		  echo "    export _CC_${ccn}MODE=1"
+  		  echo " and then call configure again."
+  		  echo "------------------------------------------"
+  		  exit 1
+  		fi
+! 		# Set CFLAGS for configure process.
+! 		# This will be reset later for config.mk.
+! 		# Use haltonmsg to force error for missing H files.
+! 		CFLAGS="$CFLAGS -D_ALL_SOURCE -Wc,float(ieee),haltonmsg(3296)";
+! 		LDFLAGS="$LDFLAGS -Wl,EDIT=NO"
+  		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+  $as_echo "yes" >&6; }
+  		;;
+***************
+*** 8697,8704 ****
+  if test -z "$SKIP_MOTIF"; then
+    cppflags_save=$CPPFLAGS
+    CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+!   for ac_header in Xm/Xm.h Xm/XpmP.h Xm/JoinSideT.h Xm/TraitP.h Xm/Manager.h \
+! 		   Xm/UnhighlightT.h Xm/Notebook.h
+  do :
+    as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+  ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+--- 8700,8712 ----
+  if test -z "$SKIP_MOTIF"; then
+    cppflags_save=$CPPFLAGS
+    CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+!   if test "$zOSUnix" = "yes"; then
+! 	xmheader="Xm/Xm.h"
+!   else
+! 	xmheader="Xm/Xm.h Xm/XpmP.h Xm/JoinSideT.h Xm/TraitP.h Xm/Manager.h
+!   	   Xm/UnhighlightT.h Xm/Notebook.h"
+!   fi
+!   for ac_header in $xmheader
+  do :
+    as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+  ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+***************
+*** 8713,8719 ****
+  done
+  
+  
+!   if test $ac_cv_header_Xm_XpmP_h = yes; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XpmAttributes_21 in Xm/XpmP.h" >&5
+  $as_echo_n "checking for XpmAttributes_21 in Xm/XpmP.h... " >&6; }
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+--- 8721,8727 ----
+  done
+  
+  
+!   if test "x$ac_cv_header_Xm_XpmP_h" = "xyes"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XpmAttributes_21 in Xm/XpmP.h" >&5
+  $as_echo_n "checking for XpmAttributes_21 in Xm/XpmP.h... " >&6; }
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+***************
+*** 12590,12595 ****
+--- 12598,12608 ----
+  fi
+  
+  
++ # IBM z/OS reset CFLAGS for config.mk
++ if test "$zOSUnix" = "yes"; then
++ 	CFLAGS="-D_ALL_SOURCE -Wc,float\(ieee\),dll"
++ fi
++ 
+  ac_config_files="$ac_config_files auto/config.mk:config.mk.in"
+  
+  cat >confcache <<\_ACEOF
+*** ../vim-7.3.554/src/Makefile	2012-03-28 17:17:45.000000000 +0200
+--- src/Makefile	2012-06-13 18:48:13.000000000 +0200
+***************
+*** 875,880 ****
+--- 875,884 ----
+  #CFLAGS = -O -Qtarget=m88110compat
+  #EXTRA_LIBS = -lgen
+  
++ # The value of QUOTESED comes from auto/config.mk.
++ # Uncomment the next line to use the default value.
++ # QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
++ 
+  ##################### end of system specific lines ################### }}}
+  
+  ### Names of the programs and targets  {{{1
+***************
+*** 2411,2417 ****
+  auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
+  	CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
+  
+- QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
+  auto/pathdef.c: Makefile auto/config.mk
+  	-@echo creating $@
+  	-@echo '/* pathdef.c */' > $@
+--- 2415,2420 ----
+*** ../vim-7.3.554/src/version.c	2012-06-13 18:15:13.000000000 +0200
+--- src/version.c	2012-06-13 19:13:54.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     555,
+  /**/
+
+-- 
+My sister Cecilia opened a computer store in Hawaii.
+She sells C shells by the seashore.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.556 b/source/ap/vim/patches/7.3.556
new file mode 100644
index 00000000..068b8d1f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.556
@@ -0,0 +1,70 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.556
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.556
+Problem:    Compiler warnings on 64 bit Windows.
+Solution:   Add type casts. (Mike Williams)
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.555/src/misc1.c	2012-06-13 17:28:51.000000000 +0200
+--- src/misc1.c	2012-06-14 20:55:47.000000000 +0200
+***************
+*** 445,452 ****
+  	    if (vim_regexec(&regmatch, ml_get(lnum) + lead_len, (colnr_T)0))
+  	    {
+  		pos.lnum = lnum;
+! 		pos.col  = *regmatch.endp - (ml_get(lnum) + lead_len);
+! 		pos.col += lead_len;
+  #ifdef FEAT_VIRTUALEDIT
+  		pos.coladd = 0;
+  #endif
+--- 445,451 ----
+  	    if (vim_regexec(&regmatch, ml_get(lnum) + lead_len, (colnr_T)0))
+  	    {
+  		pos.lnum = lnum;
+! 		pos.col = (colnr_T)(*regmatch.endp - ml_get(lnum));
+  #ifdef FEAT_VIRTUALEDIT
+  		pos.coladd = 0;
+  #endif
+***************
+*** 1354,1360 ****
+  	if (flags & OPENLINE_COM_LIST && second_line_indent > 0)
+  	{
+  	    int i;
+! 	    int padding = second_line_indent - (newindent + STRLEN(leader));
+  
+  	    /* Here whitespace is inserted after the comment char.
+  	     * Below, set_indent(newindent, SIN_INSERT) will insert the
+--- 1353,1360 ----
+  	if (flags & OPENLINE_COM_LIST && second_line_indent > 0)
+  	{
+  	    int i;
+! 	    int padding = second_line_indent
+! 					  - (newindent + (int)STRLEN(leader));
+  
+  	    /* Here whitespace is inserted after the comment char.
+  	     * Below, set_indent(newindent, SIN_INSERT) will insert the
+*** ../vim-7.3.555/src/version.c	2012-06-13 19:19:36.000000000 +0200
+--- src/version.c	2012-06-14 20:54:59.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     556,
+  /**/
+
+-- 
+He who laughs last, thinks slowest.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.557 b/source/ap/vim/patches/7.3.557
new file mode 100644
index 00000000..663c0720
--- /dev/null
+++ b/source/ap/vim/patches/7.3.557
@@ -0,0 +1,99 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.557
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.557
+Problem:    Crash when an autocommand wipes out a buffer when it is hidden.
+Solution:   Restore the current window when needed. (Christian Brabandt)
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.556/src/buffer.c	2012-06-13 14:28:16.000000000 +0200
+--- src/buffer.c	2012-06-20 11:49:54.000000000 +0200
+***************
+*** 1363,1368 ****
+--- 1363,1369 ----
+      int		action;
+  {
+      buf_T	*prevbuf;
++     win_T	*prevwin;
+      int		unload = (action == DOBUF_UNLOAD || action == DOBUF_DEL
+  						     || action == DOBUF_WIPE);
+  
+***************
+*** 1402,1423 ****
+  	if (buf_valid(prevbuf))
+  #endif
+  	{
+  	    if (prevbuf == curbuf)
+  		u_sync(FALSE);
+  	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
+  		    unload ? action : (action == DOBUF_GOTO
+  			&& !P_HID(prevbuf)
+  			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
+  	}
+      }
+  #ifdef FEAT_AUTOCMD
+      /* An autocommand may have deleted "buf", already entered it (e.g., when
+!      * it did ":bunload") or aborted the script processing! */
+! # ifdef FEAT_EVAL
+!     if (buf_valid(buf) && buf != curbuf && !aborting())
+! # else
+!     if (buf_valid(buf) && buf != curbuf)
+! # endif
+  #endif
+  	enter_buffer(buf);
+  }
+--- 1403,1432 ----
+  	if (buf_valid(prevbuf))
+  #endif
+  	{
++ 	    prevwin = curwin;
+  	    if (prevbuf == curbuf)
+  		u_sync(FALSE);
+  	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
+  		    unload ? action : (action == DOBUF_GOTO
+  			&& !P_HID(prevbuf)
+  			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
++ 	    if (curwin != prevwin && win_valid(prevwin))
++ 	      /* autocommands changed curwin, Grr! */
++ 	      curwin = prevwin;
+  	}
+      }
+  #ifdef FEAT_AUTOCMD
+      /* An autocommand may have deleted "buf", already entered it (e.g., when
+!      * it did ":bunload") or aborted the script processing!
+!      * If curwin->w_buffer is null, enter_buffer() will make it valid again */
+!     if ((buf_valid(buf) && buf != curbuf
+! #ifdef FEAT_EVAL
+! 	    && !aborting()
+! #endif
+! #ifdef FEAT_WINDOWS
+! 	 ) || curwin->w_buffer == NULL
+! #endif
+!        )
+  #endif
+  	enter_buffer(buf);
+  }
+*** ../vim-7.3.556/src/version.c	2012-06-14 20:59:20.000000000 +0200
+--- src/version.c	2012-06-20 11:53:56.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     557,
+  /**/
+
+-- 
+Don't read everything you believe.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.558 b/source/ap/vim/patches/7.3.558
new file mode 100644
index 00000000..015bc37d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.558
@@ -0,0 +1,90 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.558
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.558
+Problem:    Memory access error. (Gary Johnson)
+Solution:   Allocate one more byte. (Dominique Pelle)
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.557/src/misc1.c	2012-06-14 20:59:20.000000000 +0200
+--- src/misc1.c	2012-06-20 12:34:57.000000000 +0200
+***************
+*** 460,466 ****
+  	 *
+  	 * I'm not sure if regmmatch_T (multi-match) is needed in this case.
+  	 * It may be true that this section would work properly using the
+! 	 * regmatch_T code above, in which case, these two seperate sections
+  	 * should be consolidated w/ FEAT_COMMENTS making lead_len > 0...
+  	 */
+  #endif
+--- 460,466 ----
+  	 *
+  	 * I'm not sure if regmmatch_T (multi-match) is needed in this case.
+  	 * It may be true that this section would work properly using the
+! 	 * regmatch_T code above, in which case, these two separate sections
+  	 * should be consolidated w/ FEAT_COMMENTS making lead_len > 0...
+  	 */
+  #endif
+***************
+*** 1053,1061 ****
+  	}
+  	if (lead_len)
+  	{
+! 	    /* allocate buffer (may concatenate p_exta later) */
+  	    leader = alloc(lead_len + lead_repl_len + extra_space + extra_len
+! 			 + (second_line_indent > 0 ? second_line_indent : 0));
+  	    allocated = leader;		    /* remember to free it later */
+  
+  	    if (leader == NULL)
+--- 1053,1061 ----
+  	}
+  	if (lead_len)
+  	{
+! 	    /* allocate buffer (may concatenate p_extra later) */
+  	    leader = alloc(lead_len + lead_repl_len + extra_space + extra_len
+! 		     + (second_line_indent > 0 ? second_line_indent : 0) + 1);
+  	    allocated = leader;		    /* remember to free it later */
+  
+  	    if (leader == NULL)
+***************
+*** 3342,3348 ****
+  	    buf = alloc(buflen);
+  	else if (maxlen < 10)
+  	{
+! 	    /* Need some more space. This migth happen when receiving a long
+  	     * escape sequence. */
+  	    buflen += 100;
+  	    buf = vim_realloc(buf, buflen);
+--- 3342,3348 ----
+  	    buf = alloc(buflen);
+  	else if (maxlen < 10)
+  	{
+! 	    /* Need some more space. This might happen when receiving a long
+  	     * escape sequence. */
+  	    buflen += 100;
+  	    buf = vim_realloc(buf, buflen);
+*** ../vim-7.3.557/src/version.c	2012-06-20 11:54:55.000000000 +0200
+--- src/version.c	2012-06-20 12:36:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     558,
+  /**/
+
+-- 
+George:  "I just got a new set of golf clubs for my wife!"
+  John:  "Great trade!"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.559 b/source/ap/vim/patches/7.3.559
new file mode 100644
index 00000000..df767372
--- /dev/null
+++ b/source/ap/vim/patches/7.3.559
@@ -0,0 +1,131 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.559
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.559
+Problem:    home_replace() does not work with 8.3 filename.
+Solution:   Make ":p" expand 8.3 name to full path. (Yasuhiro Matsumoto)
+Files:	    src/eval.c, src/misc1.c
+
+
+*** ../vim-7.3.558/src/eval.c	2012-06-13 14:28:16.000000000 +0200
+--- src/eval.c	2012-06-20 13:52:47.000000000 +0200
+***************
+*** 23554,23559 ****
+--- 23554,23580 ----
+  		return -1;
+  	}
+  
++ #ifdef WIN3264
++ # if _WIN32_WINNT >= 0x0500
++ 	if (vim_strchr(*fnamep, '~') != NULL)
++ 	{
++ 	    /* Expand 8.3 filename to full path.  Needed to make sure the same
++ 	     * file does not have two different names.
++ 	     * Note: problem does not occur if _WIN32_WINNT < 0x0500. */
++ 	    p = alloc(_MAX_PATH + 1);
++ 	    if (p != NULL)
++ 	    {
++ 		if (GetLongPathName(*fnamep, p, MAXPATHL))
++ 		{
++ 		    vim_free(*bufp);
++ 		    *bufp = *fnamep = p;
++ 		}
++ 		else
++ 		    vim_free(p);
++ 	    }
++ 	}
++ # endif
++ #endif
+  	/* Append a path separator to a directory. */
+  	if (mch_isdir(*fnamep))
+  	{
+*** ../vim-7.3.558/src/misc1.c	2012-06-20 12:40:01.000000000 +0200
+--- src/misc1.c	2012-06-20 13:57:22.000000000 +0200
+***************
+*** 4499,4505 ****
+  {
+      size_t	dirlen = 0, envlen = 0;
+      size_t	len;
+!     char_u	*homedir_env;
+      char_u	*p;
+  
+      if (src == NULL)
+--- 4499,4505 ----
+  {
+      size_t	dirlen = 0, envlen = 0;
+      size_t	len;
+!     char_u	*homedir_env, *homedir_env_orig;
+      char_u	*p;
+  
+      if (src == NULL)
+***************
+*** 4525,4533 ****
+  	dirlen = STRLEN(homedir);
+  
+  #ifdef VMS
+!     homedir_env = mch_getenv((char_u *)"SYS$LOGIN");
+  #else
+!     homedir_env = mch_getenv((char_u *)"HOME");
+  #endif
+  
+      if (homedir_env != NULL && *homedir_env == NUL)
+--- 4525,4548 ----
+  	dirlen = STRLEN(homedir);
+  
+  #ifdef VMS
+!     homedir_env_orig = homedir_env = mch_getenv((char_u *)"SYS$LOGIN");
+  #else
+!     homedir_env_orig = homedir_env = mch_getenv((char_u *)"HOME");
+! #endif
+! #if defined(FEAT_MODIFY_FNAME) || defined(WIN3264)
+!     if (vim_strchr(homedir_env, '~') != NULL)
+!     {
+! 	int	usedlen = 0;
+! 	int	flen;
+! 	char_u	*fbuf = NULL;
+! 
+! 	flen = (int)STRLEN(homedir_env);
+! 	(void)modify_fname(":p", &usedlen, &homedir_env, &fbuf, &flen);
+! 	flen = (int)STRLEN(homedir_env);
+! 	if (flen > 0 && vim_ispathsep(homedir_env[flen - 1]))
+! 	    /* Remove the trailing / that is added to a directory. */
+! 	    homedir_env[flen - 1] = NUL;
+!     }
+  #endif
+  
+      if (homedir_env != NULL && *homedir_env == NUL)
+***************
+*** 4585,4590 ****
+--- 4600,4608 ----
+      /* if (dstlen == 0) out of space, what to do??? */
+  
+      *dst = NUL;
++ 
++     if (homedir_env != homedir_env_orig)
++ 	vim_free(homedir_env);
+  }
+  
+  /*
+*** ../vim-7.3.558/src/version.c	2012-06-20 12:40:01.000000000 +0200
+--- src/version.c	2012-06-20 14:02:11.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     559,
+  /**/
+
+-- 
+The future isn't what it used to be.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.560 b/source/ap/vim/patches/7.3.560
new file mode 100644
index 00000000..7f464111
--- /dev/null
+++ b/source/ap/vim/patches/7.3.560
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.560
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.560
+Problem:    Get an error for a locked argument in extend().
+Solution:   Initialize the lock flag for a dictionary. (Yukihiro Nakadaira)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.559/src/eval.c	2012-06-20 14:02:23.000000000 +0200
+--- src/eval.c	2012-06-20 14:08:34.000000000 +0200
+***************
+*** 19981,19986 ****
+--- 19981,19987 ----
+      dictitem_T	*dict_var;
+  {
+      hash_init(&dict->dv_hashtab);
++     dict->dv_lock = 0;
+      dict->dv_refcount = DO_NOT_FREE_CNT;
+      dict->dv_copyID = 0;
+      dict_var->di_tv.vval.v_dict = dict;
+*** ../vim-7.3.559/src/version.c	2012-06-20 14:02:23.000000000 +0200
+--- src/version.c	2012-06-20 14:09:34.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     560,
+  /**/
+
+-- 
+"Oh, no!  NOT the Spanish Inquisition!"
+"NOBODY expects the Spanish Inquisition!!!"
+				-- Monty Python sketch --
+"Oh, no!  NOT another option!"
+"EVERYBODY expects another option!!!"
+				-- Discussion in vim-dev mailing list --
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.561 b/source/ap/vim/patches/7.3.561
new file mode 100644
index 00000000..d51030c4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.561
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.561
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.561
+Problem:    Using refresh: always in a complete function breaks the "."
+	    command. (Val Markovic)
+Solution:   Add match leader to the redo buffer. (Yasuhiro Matsumoto)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.560/src/edit.c	2012-06-13 17:28:51.000000000 +0200
+--- src/edit.c	2012-06-20 14:22:23.000000000 +0200
+***************
+*** 3467,3476 ****
+--- 3467,3480 ----
+  	(*mb_char2bytes)(c, buf);
+  	buf[cc] = NUL;
+  	ins_char_bytes(buf, cc);
++ 	AppendToRedobuff(buf);
+      }
+      else
+  #endif
++     {
+  	ins_char(c);
++ 	AppendCharToRedobuff(c);
++     }
+  
+      /* If we didn't complete finding matches we must search again. */
+      if (ins_compl_need_restart())
+*** ../vim-7.3.560/src/version.c	2012-06-20 14:13:02.000000000 +0200
+--- src/version.c	2012-06-20 14:20:13.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     561,
+  /**/
+
+-- 
+Microsoft is to software what McDonalds is to gourmet cooking
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.562 b/source/ap/vim/patches/7.3.562
new file mode 100644
index 00000000..626de495
--- /dev/null
+++ b/source/ap/vim/patches/7.3.562
@@ -0,0 +1,63 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.562
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.562
+Problem:    ":profdel" should not work when the +profile feature is disabled.
+Solution:   Call ex_ni(). (Yasuhiro Matsumoto)
+Files:	    src/ex_cmds2.c
+
+
+*** ../vim-7.3.561/src/ex_cmds2.c	2012-06-13 14:28:16.000000000 +0200
+--- src/ex_cmds2.c	2012-06-20 15:43:44.000000000 +0200
+***************
+*** 596,605 ****
+      garray_T	*gap;
+  
+      gap = &dbg_breakp;
+- #ifdef FEAT_PROFILE
+      if (eap->cmdidx == CMD_profdel)
+  	gap = &prof_ga;
+  #endif
+  
+      if (vim_isdigit(*eap->arg))
+      {
+--- 596,610 ----
+      garray_T	*gap;
+  
+      gap = &dbg_breakp;
+      if (eap->cmdidx == CMD_profdel)
++     {
++ #ifdef FEAT_PROFILE
+  	gap = &prof_ga;
++ #else
++ 	ex_ni(eap);
++ 	return;
+  #endif
++     }
+  
+      if (vim_isdigit(*eap->arg))
+      {
+*** ../vim-7.3.561/src/version.c	2012-06-20 14:26:30.000000000 +0200
+--- src/version.c	2012-06-20 15:44:00.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     562,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+42. Your virtual girlfriend finds a new net sweetheart with a larger bandwidth.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.563 b/source/ap/vim/patches/7.3.563
new file mode 100644
index 00000000..c2ebf410
--- /dev/null
+++ b/source/ap/vim/patches/7.3.563
@@ -0,0 +1,97 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.563
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.563 (after 7.3.557)
+Problem:    Can't build with tiny features.
+Solution:   Add #ifdef.
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.562/src/buffer.c	2012-06-20 11:54:55.000000000 +0200
+--- src/buffer.c	2012-06-20 17:40:59.000000000 +0200
+***************
+*** 1363,1369 ****
+--- 1363,1371 ----
+      int		action;
+  {
+      buf_T	*prevbuf;
++ #ifdef FEAT_WINDOWS
+      win_T	*prevwin;
++ #endif
+      int		unload = (action == DOBUF_UNLOAD || action == DOBUF_DEL
+  						     || action == DOBUF_WIPE);
+  
+***************
+*** 1403,1418 ****
+--- 1405,1424 ----
+  	if (buf_valid(prevbuf))
+  #endif
+  	{
++ #ifdef FEAT_WINDOWS
+  	    prevwin = curwin;
++ #endif
+  	    if (prevbuf == curbuf)
+  		u_sync(FALSE);
+  	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
+  		    unload ? action : (action == DOBUF_GOTO
+  			&& !P_HID(prevbuf)
+  			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
++ #ifdef FEAT_WINDOWS
+  	    if (curwin != prevwin && win_valid(prevwin))
+  	      /* autocommands changed curwin, Grr! */
+  	      curwin = prevwin;
++ #endif
+  	}
+      }
+  #ifdef FEAT_AUTOCMD
+***************
+*** 1420,1431 ****
+       * it did ":bunload") or aborted the script processing!
+       * If curwin->w_buffer is null, enter_buffer() will make it valid again */
+      if ((buf_valid(buf) && buf != curbuf
+! #ifdef FEAT_EVAL
+  	    && !aborting()
+! #endif
+! #ifdef FEAT_WINDOWS
+  	 ) || curwin->w_buffer == NULL
+! #endif
+         )
+  #endif
+  	enter_buffer(buf);
+--- 1426,1437 ----
+       * it did ":bunload") or aborted the script processing!
+       * If curwin->w_buffer is null, enter_buffer() will make it valid again */
+      if ((buf_valid(buf) && buf != curbuf
+! # ifdef FEAT_EVAL
+  	    && !aborting()
+! # endif
+! # ifdef FEAT_WINDOWS
+  	 ) || curwin->w_buffer == NULL
+! # endif
+         )
+  #endif
+  	enter_buffer(buf);
+*** ../vim-7.3.562/src/version.c	2012-06-20 15:48:53.000000000 +0200
+--- src/version.c	2012-06-20 17:54:01.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     563,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+45. You buy a Captain Kirk chair with a built-in keyboard and mouse.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.564 b/source/ap/vim/patches/7.3.564
new file mode 100644
index 00000000..e806b8e4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.564
@@ -0,0 +1,53 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.564
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.564 (after 7.3.559)
+Problem:    Warning for pointer conversion.
+Solution:   Add type cast.
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.563/src/misc1.c	2012-06-20 14:02:23.000000000 +0200
+--- src/misc1.c	2012-06-20 17:41:22.000000000 +0200
+***************
+*** 4537,4543 ****
+  	char_u	*fbuf = NULL;
+  
+  	flen = (int)STRLEN(homedir_env);
+! 	(void)modify_fname(":p", &usedlen, &homedir_env, &fbuf, &flen);
+  	flen = (int)STRLEN(homedir_env);
+  	if (flen > 0 && vim_ispathsep(homedir_env[flen - 1]))
+  	    /* Remove the trailing / that is added to a directory. */
+--- 4537,4544 ----
+  	char_u	*fbuf = NULL;
+  
+  	flen = (int)STRLEN(homedir_env);
+! 	(void)modify_fname((char_u *)":p", &usedlen,
+! 						  &homedir_env, &fbuf, &flen);
+  	flen = (int)STRLEN(homedir_env);
+  	if (flen > 0 && vim_ispathsep(homedir_env[flen - 1]))
+  	    /* Remove the trailing / that is added to a directory. */
+*** ../vim-7.3.563/src/version.c	2012-06-20 17:54:34.000000000 +0200
+--- src/version.c	2012-06-20 17:55:26.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     564,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+46. Your wife makes a new rule: "The computer cannot come to bed."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.565 b/source/ap/vim/patches/7.3.565
new file mode 100644
index 00000000..171520b3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.565
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.566
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.566
+Problem:    Can't generate proto file for Python 3.
+Solution:   Add PYTHON3_CFLAGS to LINT_CFLAGS.
+Files:	    src/Makefile
+
+
+*** ../vim-7.3.564/src/Makefile	2012-06-13 19:19:36.000000000 +0200
+--- src/Makefile	2012-06-20 18:36:14.000000000 +0200
+***************
+*** 1339,1345 ****
+  # with "-E".
+  OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
+  
+! LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca
+  
+  LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
+  
+--- 1339,1345 ----
+  # with "-E".
+  OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
+  
+! LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca
+  
+  LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
+  
+*** ../vim-7.3.564/src/version.c	2012-06-20 17:56:06.000000000 +0200
+--- src/version.c	2012-06-20 18:39:04.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     565,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+47. You are so familiar with the WWW that you find the search engines useless.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.566 b/source/ap/vim/patches/7.3.566
new file mode 100644
index 00000000..a0600e81
--- /dev/null
+++ b/source/ap/vim/patches/7.3.566
@@ -0,0 +1,83 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.566
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.566 (after 7.3.561)
+Problem:    Redo after completion does not work correctly when refresh: always
+	    is not used. (Raymond Ko)
+Solution:   Check the compl_opt_refresh_always flag. (Christian Brabandt)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.565/src/edit.c	2012-06-20 14:26:30.000000000 +0200
+--- src/edit.c	2012-06-20 22:52:03.000000000 +0200
+***************
+*** 3467,3479 ****
+  	(*mb_char2bytes)(c, buf);
+  	buf[cc] = NUL;
+  	ins_char_bytes(buf, cc);
+! 	AppendToRedobuff(buf);
+      }
+      else
+  #endif
+      {
+  	ins_char(c);
+! 	AppendCharToRedobuff(c);
+      }
+  
+      /* If we didn't complete finding matches we must search again. */
+--- 3467,3481 ----
+  	(*mb_char2bytes)(c, buf);
+  	buf[cc] = NUL;
+  	ins_char_bytes(buf, cc);
+! 	if (compl_opt_refresh_always)
+! 	    AppendToRedobuff(buf);
+      }
+      else
+  #endif
+      {
+  	ins_char(c);
+! 	if (compl_opt_refresh_always)
+! 	    AppendCharToRedobuff(c);
+      }
+  
+      /* If we didn't complete finding matches we must search again. */
+***************
+*** 3481,3487 ****
+  	ins_compl_restart();
+  
+      /* When 'always' is set, don't reset compl_leader. While completing,
+!      * cursor don't point original position, changing compl_leader would
+       * break redo. */
+      if (!compl_opt_refresh_always)
+      {
+--- 3483,3489 ----
+  	ins_compl_restart();
+  
+      /* When 'always' is set, don't reset compl_leader. While completing,
+!      * cursor doesn't point original position, changing compl_leader would
+       * break redo. */
+      if (!compl_opt_refresh_always)
+      {
+*** ../vim-7.3.565/src/version.c	2012-06-20 18:39:12.000000000 +0200
+--- src/version.c	2012-06-20 22:54:27.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     566,
+  /**/
+
+-- 
+CVS sux, men don't like commitment
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.567 b/source/ap/vim/patches/7.3.567
new file mode 100644
index 00000000..62399f18
--- /dev/null
+++ b/source/ap/vim/patches/7.3.567
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.567
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.567
+Problem:    Missing copyright notice.
+Solution:   Add Vim copyright notice. (Taro Muraoka)
+Files:	    src/dehqx.py
+
+
+*** ../vim-7.3.566/src/dehqx.py	2010-08-15 21:57:32.000000000 +0200
+--- src/dehqx.py	2012-06-29 11:27:41.000000000 +0200
+***************
+*** 1,7 ****
+  # Python script to get both the data and resource fork from a BinHex encoded
+  # file.
+! # Author: Taro Muraoka
+! # Last Change: 2003 Oct 25
+  
+  import sys
+  import binhex
+--- 1,10 ----
+  # Python script to get both the data and resource fork from a BinHex encoded
+  # file.
+! # Author: MURAOKA Taro <koron.kaoriya@gmail.com>
+! # Last Change: 2012 Jun 29
+! #
+! # Copyright (C) 2003,12 MURAOKA Taro <koron.kaoriya@gmail.com>
+! # THIS FILE IS DISTRIBUTED UNDER THE VIM LICENSE.
+  
+  import sys
+  import binhex
+*** ../vim-7.3.566/src/version.c	2012-06-20 22:55:56.000000000 +0200
+--- src/version.c	2012-06-29 11:45:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     567,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+66. You create a homepage with the impression to cure the afflicted...but
+    your hidden agenda is to receive more e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.568 b/source/ap/vim/patches/7.3.568
new file mode 100644
index 00000000..ef4fcfe5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.568
@@ -0,0 +1,138 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.568
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.568
+Problem:    Bad indents for #ifdefs.
+Solution:   Add and remove spaces. (Elias Diem)
+Files:	    src/globals.h
+
+
+*** ../vim-7.3.567/src/globals.h	2012-02-11 23:45:30.000000000 +0100
+--- src/globals.h	2012-06-29 12:32:14.000000000 +0200
+***************
+*** 513,520 ****
+  #  define ONE_CLIPBOARD
+  # endif
+  
+! #define CLIP_UNNAMED      1
+! #define CLIP_UNNAMED_PLUS 2
+  EXTERN int	clip_unnamed INIT(= 0); /* above two values or'ed */
+  
+  EXTERN int	clip_autoselect INIT(= FALSE);
+--- 513,520 ----
+  #  define ONE_CLIPBOARD
+  # endif
+  
+! # define CLIP_UNNAMED      1
+! # define CLIP_UNNAMED_PLUS 2
+  EXTERN int	clip_unnamed INIT(= 0); /* above two values or'ed */
+  
+  EXTERN int	clip_autoselect INIT(= FALSE);
+***************
+*** 737,745 ****
+  #endif
+  
+  EXTERN pos_T	saved_cursor		/* w_cursor before formatting text. */
+! # ifdef DO_INIT
+  	= INIT_POS_T(0, 0, 0)
+! # endif
+  	;
+  
+  /*
+--- 737,745 ----
+  #endif
+  
+  EXTERN pos_T	saved_cursor		/* w_cursor before formatting text. */
+! #ifdef DO_INIT
+  	= INIT_POS_T(0, 0, 0)
+! #endif
+  	;
+  
+  /*
+***************
+*** 807,815 ****
+  # endif
+  EXTERN int	has_mbyte INIT(= 0);		/* any multi-byte encoding */
+  
+! #if defined(WIN3264) && defined(FEAT_MBYTE)
+  EXTERN int	wide_WindowProc INIT(= FALSE);	/* use wide WindowProc() */
+! #endif
+  
+  /*
+   * To speed up BYTELEN() we fill a table with the byte lengths whenever
+--- 807,815 ----
+  # endif
+  EXTERN int	has_mbyte INIT(= 0);		/* any multi-byte encoding */
+  
+! # if defined(WIN3264) && defined(FEAT_MBYTE)
+  EXTERN int	wide_WindowProc INIT(= FALSE);	/* use wide WindowProc() */
+! # endif
+  
+  /*
+   * To speed up BYTELEN() we fill a table with the byte lengths whenever
+***************
+*** 1099,1106 ****
+  EXTERN int  save_p_ls INIT(= -1);	/* Save 'laststatus' setting */
+  EXTERN int  save_p_wmh INIT(= -1);	/* Save 'winminheight' setting */
+  EXTERN int  wild_menu_showing INIT(= 0);
+! #define WM_SHOWN	1		/* wildmenu showing */
+! #define WM_SCROLLED	2		/* wildmenu showing with scroll */
+  #endif
+  
+  #ifdef MSWIN
+--- 1099,1106 ----
+  EXTERN int  save_p_ls INIT(= -1);	/* Save 'laststatus' setting */
+  EXTERN int  save_p_wmh INIT(= -1);	/* Save 'winminheight' setting */
+  EXTERN int  wild_menu_showing INIT(= 0);
+! # define WM_SHOWN	1		/* wildmenu showing */
+! # define WM_SCROLLED	2		/* wildmenu showing with scroll */
+  #endif
+  
+  #ifdef MSWIN
+***************
+*** 1310,1318 ****
+  EXTERN Atom	commProperty INIT(= None);
+  EXTERN char_u	*serverDelayedStartName INIT(= NULL);
+  # else
+! # ifdef PROTO
+  typedef int HWND;
+! # endif
+  EXTERN HWND	clientWindow INIT(= 0);
+  # endif
+  #endif
+--- 1310,1318 ----
+  EXTERN Atom	commProperty INIT(= None);
+  EXTERN char_u	*serverDelayedStartName INIT(= NULL);
+  # else
+! #  ifdef PROTO
+  typedef int HWND;
+! #  endif
+  EXTERN HWND	clientWindow INIT(= 0);
+  # endif
+  #endif
+*** ../vim-7.3.567/src/version.c	2012-06-29 11:46:28.000000000 +0200
+--- src/version.c	2012-06-29 12:34:21.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     568,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+67. Your hard drive crashes. You haven't logged in for two hours.  You start
+    to twitch. You pick up the phone and manually dial your ISP's access
+    number. You try to hum to communicate with the modem.  You succeed.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.569 b/source/ap/vim/patches/7.3.569
new file mode 100644
index 00000000..435733fe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.569
@@ -0,0 +1,4762 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.569
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.569
+Problem:    Evaluating Vim expression in Python is insufficient.
+Solution:   Add vim.bindeval().  Also add pyeval() and py3eval(). (ZyX)
+Files:	    runtime/doc/eval.txt, runtime/doc/if_pyth.txt, src/eval.c,
+	    src/if_lua.c, src/if_py_both.h, src/if_python.c, src/if_python3.c,
+	    src/proto/eval.pro, src/proto/if_python.pro,
+	    src/proto/if_python3.pro, src/testdir/Make_amiga.mak,
+	    src/testdir/Make_dos.mak, src/testdir/Make_ming.mak,
+	    src/testdir/Make_os2.mak, src/testdir/Makefile,
+	    src/testdir/test86.in, src/testdir/test86.ok,
+	    src/testdir/test87.in, src/testdir/test87.ok
+
+
+*** ../vim-7.3.568/runtime/doc/eval.txt	2012-03-07 19:16:49.000000000 +0100
+--- runtime/doc/eval.txt	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 1836,1844 ****
+  localtime()			Number	current time
+  log( {expr})			Float	natural logarithm (base e) of {expr}
+  log10( {expr})			Float	logarithm of Float {expr} to base 10
+  map( {expr}, {string})		List/Dict  change each item in {expr} to {expr}
+  maparg( {name}[, {mode} [, {abbr} [, {dict}]]])
+! 				String	rhs of mapping {name} in mode {mode}
+  mapcheck( {name}[, {mode} [, {abbr}]])
+  				String	check for mappings matching {name}
+  match( {expr}, {pat}[, {start}[, {count}]])
+--- 1847,1857 ----
+  localtime()			Number	current time
+  log( {expr})			Float	natural logarithm (base e) of {expr}
+  log10( {expr})			Float	logarithm of Float {expr} to base 10
++ luaeval( {expr}[, {expr}])	any	evaluate |Lua| expression
+  map( {expr}, {string})		List/Dict  change each item in {expr} to {expr}
+  maparg( {name}[, {mode} [, {abbr} [, {dict}]]])
+! 				String or Dict
+! 					rhs of mapping {name} in mode {mode}
+  mapcheck( {name}[, {mode} [, {abbr}]])
+  				String	check for mappings matching {name}
+  match( {expr}, {pat}[, {start}[, {count}]])
+***************
+*** 1867,1872 ****
+--- 1880,1887 ----
+  prevnonblank( {lnum})		Number	line nr of non-blank line <= {lnum}
+  printf( {fmt}, {expr1}...)	String	format text
+  pumvisible()			Number	whether popup menu is visible
++ pyeval( {expr})			any	evaluate |Python| expression
++ py3eval( {expr})		any	evaluate |python3| expression
+  range( {expr} [, {max} [, {stride}]])
+  				List	items from {expr} to {max}
+  readfile( {fname} [, {binary} [, {max}]])
+***************
+*** 3980,3985 ****
+--- 4003,4022 ----
+  <			-2.0
+  		{only available when compiled with the |+float| feature}
+  		
++ luaeval({expr}[, {expr}])					*luaeval()*
++ 		Evaluate Lua expression {expr} and return its result converted 
++ 		to Vim data structures. Second {expr} may hold additional 
++ 		argument accessible as _A inside first {expr}.
++ 		Strings are returned as they are.
++ 		Boolean objects are converted to numbers.
++ 		Numbers are converted to |Float| values if vim was compiled 
++ 		with |+float| and to numbers otherwise.
++ 		Dictionaries and lists obtained by vim.eval() are returned 
++ 		as-is.
++ 		Other objects are returned as zero without any errors.
++ 		See |lua-luaeval| for more details.
++ 		{only available when compiled with the |+lua| feature}
++ 
+  map({expr}, {string})					*map()*
+  		{expr} must be a |List| or a |Dictionary|.
+  		Replace each item in {expr} with the result of evaluating
+***************
+*** 4574,4579 ****
+--- 4612,4640 ----
+  		This can be used to avoid some things that would remove the
+  		popup menu.
+  
++ 							*E860* *E861*
++ py3eval({expr})						*py3eval()*
++ 		Evaluate Python expression {expr} and return its result
++ 		converted to Vim data structures.
++ 		Numbers and strings are returned as they are (strings are 
++ 		copied though, unicode strings are additionally converted to 
++ 		'encoding').
++ 		Lists are represented as Vim |List| type.
++ 		Dictionaries are represented as Vim |Dictionary| type with 
++ 		keys converted to strings.
++ 		{only available when compiled with the |+python3| feature}
++ 
++ 							*E858* *E859*
++ pyeval({expr})						*pyeval()*
++ 		Evaluate Python expression {expr} and return its result
++ 		converted to Vim data structures.
++ 		Numbers and strings are returned as they are (strings are 
++ 		copied though).
++ 		Lists are represented as Vim |List| type.
++ 		Dictionaries are represented as Vim |Dictionary| type with 
++ 		keys converted to strings.
++ 		{only available when compiled with the |+python| feature}
++ 
+  							*E726* *E727*
+  range({expr} [, {max} [, {stride}]])				*range()*
+  		Returns a |List| with Numbers:
+***************
+*** 4807,4812 ****
+--- 4868,4877 ----
+  		Search for regexp pattern {pattern}.  The search starts at the
+  		cursor position (you can use |cursor()| to set it).
+  
++ 		If there is no match a 0 is returned and the cursor doesn't
++ 		move.  No error message is given.
++ 		When a match has been found its line number is returned.
++ 
+  		{flags} is a String, which can contain these character flags:
+  		'b'	search backward instead of forward
+  		'c'	accept a match at the cursor position
+*** ../vim-7.3.568/runtime/doc/if_pyth.txt	2010-08-15 21:57:12.000000000 +0200
+--- runtime/doc/if_pyth.txt	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 1,4 ****
+! *if_pyth.txt*   For Vim version 7.3.  Last change: 2010 Aug 13
+  
+  
+  		  VIM REFERENCE MANUAL    by Paul Moore
+--- 1,4 ----
+! *if_pyth.txt*   For Vim version 7.3.  Last change: 2012 Feb 04
+  
+  
+  		  VIM REFERENCE MANUAL    by Paul Moore
+***************
+*** 6,18 ****
+  
+  The Python Interface to Vim				*python* *Python*
+  
+! 1. Commands			|python-commands|
+! 2. The vim module		|python-vim|
+! 3. Buffer objects		|python-buffer|
+! 4. Range objects		|python-range|
+! 5. Window objects		|python-window|
+! 6. Dynamic loading		|python-dynamic|
+! 7. Python 3			|python3|
+  
+  {Vi does not have any of these commands}
+  
+--- 6,19 ----
+  
+  The Python Interface to Vim				*python* *Python*
+  
+! 1. Commands					|python-commands|
+! 2. The vim module				|python-vim|
+! 3. Buffer objects				|python-buffer|
+! 4. Range objects				|python-range|
+! 5. Window objects				|python-window|
+! 6. pyeval(), py3eval() Vim functions		|python-pyeval|
+! 7. Dynamic loading				|python-dynamic|
+! 8. Python 3					|python3|
+  
+  {Vi does not have any of these commands}
+  
+***************
+*** 150,155 ****
+--- 151,172 ----
+  	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name':
+  	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
+  
++ vim.bindeval(str)					*python-bindeval*
++ 	Like |python-eval|, but
++ 	1. if expression evaluates to |List| or |Dictionary| it is returned as 
++ 	   vimlist or vimdictionary python type that are connected to original 
++ 	   list or dictionary. Thus modifications to these objects imply 
++ 	   modifications of the original.
++ 	2. if expression evaluates to a function reference, then it returns 
++ 	   callable vimfunction object. Use self keyword argument to assign 
++ 	   |self| object for dictionary functions.
++ 
++ 	Note: this function has the same behavior as |lua-eval| (except that 
++ 	      lua does not support running vim functions), |python-eval| is 
++ 	      kept for backwards compatibility in order not to make scripts 
++ 	      relying on outputs of vim.eval() being a copy of original or 
++ 	      vim.eval("1") returning a string.
++ 
+  
+  
+  Error object of the "vim" module
+***************
+*** 222,229 ****
+  	- from indexing vim.buffers (|python-buffers|)
+  	- from the "buffer" attribute of a window (|python-window|)
+  
+! Buffer objects have one read-only attribute - name - the full file name for
+! the buffer.  They also have three methods (append, mark, and range; see below).
+  
+  You can also treat buffer objects as sequence objects.  In this context, they
+  act as if they were lists (yes, they are mutable) of strings, with each
+--- 239,247 ----
+  	- from indexing vim.buffers (|python-buffers|)
+  	- from the "buffer" attribute of a window (|python-window|)
+  
+! Buffer objects have two read-only attributes - name - the full file name for
+! the buffer, and number - the buffer number.  They also have three methods
+! (append, mark, and range; see below).
+  
+  You can also treat buffer objects as sequence objects.  In this context, they
+  act as if they were lists (yes, they are mutable) of strings, with each
+***************
+*** 318,324 ****
+  The width attribute is writable only if the screen is split vertically.
+  
+  ==============================================================================
+! 6. Dynamic loading					*python-dynamic*
+  
+  On MS-Windows the Python library can be loaded dynamically.  The |:version|
+  output then includes |+python/dyn|.
+--- 336,348 ----
+  The width attribute is writable only if the screen is split vertically.
+  
+  ==============================================================================
+! 6. pyeval() and py3eval() Vim functions			*python-pyeval*
+! 
+! To facilitate bi-directional interface, you can use |pyeval()| and |py3eval()| 
+! functions to evaluate Python expressions and pass their values to VimL.
+! 
+! ==============================================================================
+! 7. Dynamic loading					*python-dynamic*
+  
+  On MS-Windows the Python library can be loaded dynamically.  The |:version|
+  output then includes |+python/dyn|.
+***************
+*** 335,347 ****
+  sure edit "gvim.exe" and search for "python\d*.dll\c".
+  
+  ==============================================================================
+! 7. Python 3						*python3*
+  
+  							*:py3* *:python3*
+  The |:py3| and |:python3| commands work similar to |:python|.
+  							*:py3file*
+  The |:py3file| command works similar to |:pyfile|.
+  
+  Vim can be built in four ways (:version output):
+  1. No Python support	    (-python, -python3)
+  2. Python 2 support only    (+python or +python/dyn, -python3)
+--- 359,372 ----
+  sure edit "gvim.exe" and search for "python\d*.dll\c".
+  
+  ==============================================================================
+! 8. Python 3						*python3*
+  
+  							*:py3* *:python3*
+  The |:py3| and |:python3| commands work similar to |:python|.
+  							*:py3file*
+  The |:py3file| command works similar to |:pyfile|.
+  
++ 
+  Vim can be built in four ways (:version output):
+  1. No Python support	    (-python, -python3)
+  2. Python 2 support only    (+python or +python/dyn, -python3)
+***************
+*** 355,361 ****
+  When doing this on Linux/Unix systems and importing global symbols, this leads
+  to a crash when the second Python version is used.  So either global symbols
+  are loaded but only one Python version is activated, or no global symbols are
+! loaded. The latter makes Python's "import" fail on libaries that expect the
+  symbols to be provided by Vim.
+  							*E836* *E837*
+  Vim's configuration script makes a guess for all libraries based on one
+--- 380,386 ----
+  When doing this on Linux/Unix systems and importing global symbols, this leads
+  to a crash when the second Python version is used.  So either global symbols
+  are loaded but only one Python version is activated, or no global symbols are
+! loaded. The latter makes Python's "import" fail on libraries that expect the
+  symbols to be provided by Vim.
+  							*E836* *E837*
+  Vim's configuration script makes a guess for all libraries based on one
+***************
+*** 377,382 ****
+--- 402,419 ----
+  3. You undefine PY_NO_RTLD_GLOBAL in auto/config.h after configuration.  This
+     may crash Vim though.
+  
++ 							*has-python*
++ You can test what Python version is available with: >
++ 	if has('python')
++ 	  echo 'there is Python 2.x'
++   	elseif has('python3')
++ 	  echo 'there is Python 3.x'
++ 	endif
++ 
++ Note however, that when Python 2 and 3 are both available and loaded
++ dynamically, these has() calls will try to load them.  If only one can be
++ loaded at a time, just checking if Python 2 or 3 are available will prevent
++ the other one from being available.
+  
+  ==============================================================================
+   vim:tw=78:ts=8:ft=help:norl:
+*** ../vim-7.3.568/src/eval.c	2012-06-20 14:13:02.000000000 +0200
+--- src/eval.c	2012-06-20 18:29:15.000000000 +0200
+***************
+*** 424,453 ****
+  static int get_lit_string_tv __ARGS((char_u **arg, typval_T *rettv, int evaluate));
+  static int get_list_tv __ARGS((char_u **arg, typval_T *rettv, int evaluate));
+  static int rettv_list_alloc __ARGS((typval_T *rettv));
+- static listitem_T *listitem_alloc __ARGS((void));
+  static void listitem_free __ARGS((listitem_T *item));
+- static void listitem_remove __ARGS((list_T *l, listitem_T *item));
+  static long list_len __ARGS((list_T *l));
+  static int list_equal __ARGS((list_T *l1, list_T *l2, int ic, int recursive));
+  static int dict_equal __ARGS((dict_T *d1, dict_T *d2, int ic, int recursive));
+  static int tv_equal __ARGS((typval_T *tv1, typval_T *tv2, int ic, int recursive));
+- static listitem_T *list_find __ARGS((list_T *l, long n));
+  static long list_find_nr __ARGS((list_T *l, long idx, int *errorp));
+  static long list_idx_of_item __ARGS((list_T *l, listitem_T *item));
+- static void list_append __ARGS((list_T *l, listitem_T *item));
+  static int list_append_number __ARGS((list_T *l, varnumber_T n));
+- static int list_insert_tv __ARGS((list_T *l, typval_T *tv, listitem_T *item));
+  static int list_extend __ARGS((list_T	*l1, list_T *l2, listitem_T *bef));
+  static int list_concat __ARGS((list_T *l1, list_T *l2, typval_T *tv));
+  static list_T *list_copy __ARGS((list_T *orig, int deep, int copyID));
+- static void list_remove __ARGS((list_T *l, listitem_T *item, listitem_T *item2));
+  static char_u *list2string __ARGS((typval_T *tv, int copyID));
+  static int list_join_inner __ARGS((garray_T *gap, list_T *l, char_u *sep, int echo_style, int copyID, garray_T *join_gap));
+  static int list_join __ARGS((garray_T *gap, list_T *l, char_u *sep, int echo, int copyID));
+  static int free_unref_items __ARGS((int copyID));
+- static void set_ref_in_ht __ARGS((hashtab_T *ht, int copyID));
+- static void set_ref_in_list __ARGS((list_T *l, int copyID));
+- static void set_ref_in_item __ARGS((typval_T *tv, int copyID));
+  static int rettv_dict_alloc __ARGS((typval_T *rettv));
+  static void dict_free __ARGS((dict_T *d, int recurse));
+  static dictitem_T *dictitem_copy __ARGS((dictitem_T *org));
+--- 424,444 ----
+***************
+*** 654,659 ****
+--- 645,656 ----
+  static void f_prevnonblank __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_printf __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_pumvisible __ARGS((typval_T *argvars, typval_T *rettv));
++ #ifdef FEAT_PYTHON3
++ static void f_py3eval __ARGS((typval_T *argvars, typval_T *rettv));
++ #endif
++ #ifdef FEAT_PYTHON
++ static void f_pyeval __ARGS((typval_T *argvars, typval_T *rettv));
++ #endif
+  static void f_range __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_readfile __ARGS((typval_T *argvars, typval_T *rettv));
+  static void f_reltime __ARGS((typval_T *argvars, typval_T *rettv));
+***************
+*** 824,831 ****
+  static char_u *autoload_name __ARGS((char_u *name));
+  static void cat_func_name __ARGS((char_u *buf, ufunc_T *fp));
+  static void func_free __ARGS((ufunc_T *fp));
+- static void func_unref __ARGS((char_u *name));
+- static void func_ref __ARGS((char_u *name));
+  static void call_user_func __ARGS((ufunc_T *fp, int argcount, typval_T *argvars, typval_T *rettv, linenr_T firstline, linenr_T lastline, dict_T *selfdict));
+  static int can_free_funccal __ARGS((funccall_T *fc, int copyID)) ;
+  static void free_funccal __ARGS((funccall_T *fc, int free_val));
+--- 821,826 ----
+***************
+*** 5927,5933 ****
+  /*
+   * Allocate a list item.
+   */
+!     static listitem_T *
+  listitem_alloc()
+  {
+      return (listitem_T *)alloc(sizeof(listitem_T));
+--- 5922,5928 ----
+  /*
+   * Allocate a list item.
+   */
+!     listitem_T *
+  listitem_alloc()
+  {
+      return (listitem_T *)alloc(sizeof(listitem_T));
+***************
+*** 5947,5953 ****
+  /*
+   * Remove a list item from a List and free it.  Also clears the value.
+   */
+!     static void
+  listitem_remove(l, item)
+      list_T  *l;
+      listitem_T *item;
+--- 5942,5948 ----
+  /*
+   * Remove a list item from a List and free it.  Also clears the value.
+   */
+!     void
+  listitem_remove(l, item)
+      list_T  *l;
+      listitem_T *item;
+***************
+*** 6123,6129 ****
+   * A negative index is counted from the end; -1 is the last item.
+   * Returns NULL when "n" is out of range.
+   */
+!     static listitem_T *
+  list_find(l, n)
+      list_T	*l;
+      long	n;
+--- 6118,6124 ----
+   * A negative index is counted from the end; -1 is the last item.
+   * Returns NULL when "n" is out of range.
+   */
+!     listitem_T *
+  list_find(l, n)
+      list_T	*l;
+      long	n;
+***************
+*** 6265,6271 ****
+  /*
+   * Append item "item" to the end of list "l".
+   */
+!     static void
+  list_append(l, item)
+      list_T	*l;
+      listitem_T	*item;
+--- 6260,6266 ----
+  /*
+   * Append item "item" to the end of list "l".
+   */
+!     void
+  list_append(l, item)
+      list_T	*l;
+      listitem_T	*item;
+***************
+*** 6378,6384 ****
+   * If "item" is NULL append at the end.
+   * Return FAIL when out of memory.
+   */
+!     static int
+  list_insert_tv(l, tv, item)
+      list_T	*l;
+      typval_T	*tv;
+--- 6373,6379 ----
+   * If "item" is NULL append at the end.
+   * Return FAIL when out of memory.
+   */
+!     int
+  list_insert_tv(l, tv, item)
+      list_T	*l;
+      typval_T	*tv;
+***************
+*** 6523,6529 ****
+   * Remove items "item" to "item2" from list "l".
+   * Does not free the listitem or the value!
+   */
+!     static void
+  list_remove(l, item, item2)
+      list_T	*l;
+      listitem_T	*item;
+--- 6518,6524 ----
+   * Remove items "item" to "item2" from list "l".
+   * Does not free the listitem or the value!
+   */
+!     void
+  list_remove(l, item, item2)
+      list_T	*l;
+      listitem_T	*item;
+***************
+*** 6785,6790 ****
+--- 6780,6793 ----
+      set_ref_in_lua(copyID);
+  #endif
+  
++ #ifdef FEAT_PYTHON
++     set_ref_in_python(copyID);
++ #endif
++ 
++ #ifdef FEAT_PYTHON3
++     set_ref_in_python3(copyID);
++ #endif
++ 
+      /*
+       * 2. Free lists and dictionaries that are not referenced.
+       */
+***************
+*** 6870,6876 ****
+  /*
+   * Mark all lists and dicts referenced through hashtab "ht" with "copyID".
+   */
+!     static void
+  set_ref_in_ht(ht, copyID)
+      hashtab_T	*ht;
+      int		copyID;
+--- 6873,6879 ----
+  /*
+   * Mark all lists and dicts referenced through hashtab "ht" with "copyID".
+   */
+!     void
+  set_ref_in_ht(ht, copyID)
+      hashtab_T	*ht;
+      int		copyID;
+***************
+*** 6890,6896 ****
+  /*
+   * Mark all lists and dicts referenced through list "l" with "copyID".
+   */
+!     static void
+  set_ref_in_list(l, copyID)
+      list_T	*l;
+      int		copyID;
+--- 6893,6899 ----
+  /*
+   * Mark all lists and dicts referenced through list "l" with "copyID".
+   */
+!     void
+  set_ref_in_list(l, copyID)
+      list_T	*l;
+      int		copyID;
+***************
+*** 6904,6910 ****
+  /*
+   * Mark all lists and dicts referenced through typval "tv" with "copyID".
+   */
+!     static void
+  set_ref_in_item(tv, copyID)
+      typval_T	*tv;
+      int		copyID;
+--- 6907,6913 ----
+  /*
+   * Mark all lists and dicts referenced through typval "tv" with "copyID".
+   */
+!     void
+  set_ref_in_item(tv, copyID)
+      typval_T	*tv;
+      int		copyID;
+***************
+*** 7986,7991 ****
+--- 7989,8000 ----
+      {"prevnonblank",	1, 1, f_prevnonblank},
+      {"printf",		2, 19, f_printf},
+      {"pumvisible",	0, 0, f_pumvisible},
++ #ifdef FEAT_PYTHON3
++     {"py3eval",		1, 1, f_py3eval},
++ #endif
++ #ifdef FEAT_PYTHON
++     {"pyeval",		1, 1, f_pyeval},
++ #endif
+      {"range",		1, 3, f_range},
+      {"readfile",	1, 3, f_readfile},
+      {"reltime",		0, 2, f_reltime},
+***************
+*** 9150,9155 ****
+--- 9159,9203 ----
+  #endif
+  }
+  
++     int
++ func_call(name, args, selfdict, rettv)
++     char_u	*name;
++     typval_T	*args;
++     dict_T	*selfdict;
++     typval_T	*rettv;
++ {
++     listitem_T	*item;
++     typval_T	argv[MAX_FUNC_ARGS + 1];
++     int		argc = 0;
++     int		dummy;
++     int		r = 0;
++ 
++     for (item = args->vval.v_list->lv_first; item != NULL;
++ 							 item = item->li_next)
++     {
++ 	if (argc == MAX_FUNC_ARGS)
++ 	{
++ 	    EMSG(_("E699: Too many arguments"));
++ 	    break;
++ 	}
++ 	/* Make a copy of each argument.  This is needed to be able to set
++ 	 * v_lock to VAR_FIXED in the copy without changing the original list.
++ 	 */
++ 	copy_tv(&item->li_tv, &argv[argc++]);
++     }
++ 
++     if (item == NULL)
++ 	r = call_func(name, (int)STRLEN(name), rettv, argc, argv,
++ 				 curwin->w_cursor.lnum, curwin->w_cursor.lnum,
++ 						      &dummy, TRUE, selfdict);
++ 
++     /* Free the arguments. */
++     while (argc > 0)
++ 	clear_tv(&argv[--argc]);
++ 
++     return r;
++ }
++ 
+  /*
+   * "call(func, arglist)" function
+   */
+***************
+*** 9159,9168 ****
+      typval_T	*rettv;
+  {
+      char_u	*func;
+-     typval_T	argv[MAX_FUNC_ARGS + 1];
+-     int		argc = 0;
+-     listitem_T	*item;
+-     int		dummy;
+      dict_T	*selfdict = NULL;
+  
+      if (argvars[1].v_type != VAR_LIST)
+--- 9207,9212 ----
+***************
+*** 9190,9217 ****
+  	selfdict = argvars[2].vval.v_dict;
+      }
+  
+!     for (item = argvars[1].vval.v_list->lv_first; item != NULL;
+! 							 item = item->li_next)
+!     {
+! 	if (argc == MAX_FUNC_ARGS)
+! 	{
+! 	    EMSG(_("E699: Too many arguments"));
+! 	    break;
+! 	}
+! 	/* Make a copy of each argument.  This is needed to be able to set
+! 	 * v_lock to VAR_FIXED in the copy without changing the original list.
+! 	 */
+! 	copy_tv(&item->li_tv, &argv[argc++]);
+!     }
+! 
+!     if (item == NULL)
+! 	(void)call_func(func, (int)STRLEN(func), rettv, argc, argv,
+! 				 curwin->w_cursor.lnum, curwin->w_cursor.lnum,
+! 						      &dummy, TRUE, selfdict);
+! 
+!     /* Free the arguments. */
+!     while (argc > 0)
+! 	clear_tv(&argv[--argc]);
+  }
+  
+  #ifdef FEAT_FLOAT
+--- 9234,9240 ----
+  	selfdict = argvars[2].vval.v_dict;
+      }
+  
+!     (void)func_call(func, &argvars[1], selfdict, rettv);
+  }
+  
+  #ifdef FEAT_FLOAT
+***************
+*** 14424,14429 ****
+--- 14447,14486 ----
+  #endif
+  }
+  
++ #ifdef FEAT_PYTHON3
++ /*
++  * "py3eval()" function
++  */
++     static void
++ f_py3eval(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     char_u	*str;
++     char_u	buf[NUMBUFLEN];
++ 
++     str = get_tv_string_buf(&argvars[0], buf);
++     do_py3eval(str, rettv);
++ }
++ #endif
++ 
++ #ifdef FEAT_PYTHON
++ /*
++  * "pyeval()" function
++  */
++     static void
++ f_pyeval(argvars, rettv)
++     typval_T	*argvars;
++     typval_T	*rettv;
++ {
++     char_u	*str;
++     char_u	buf[NUMBUFLEN];
++ 
++     str = get_tv_string_buf(&argvars[0], buf);
++     do_pyeval(str, rettv);
++ }
++ #endif
++ 
+  /*
+   * "range()" function
+   */
+***************
+*** 22139,22145 ****
+   * Unreference a Function: decrement the reference count and free it when it
+   * becomes zero.  Only for numbered functions.
+   */
+!     static void
+  func_unref(name)
+      char_u	*name;
+  {
+--- 22196,22202 ----
+   * Unreference a Function: decrement the reference count and free it when it
+   * becomes zero.  Only for numbered functions.
+   */
+!     void
+  func_unref(name)
+      char_u	*name;
+  {
+***************
+*** 22163,22169 ****
+  /*
+   * Count a reference to a Function.
+   */
+!     static void
+  func_ref(name)
+      char_u	*name;
+  {
+--- 22220,22226 ----
+  /*
+   * Count a reference to a Function.
+   */
+!     void
+  func_ref(name)
+      char_u	*name;
+  {
+*** ../vim-7.3.568/src/if_lua.c	2012-04-06 14:30:55.000000000 +0200
+--- src/if_lua.c	2012-06-20 18:16:33.000000000 +0200
+***************
+*** 199,207 ****
+  lua_Number (*dll_lua_tonumberx) (lua_State *L, int idx, int *isnum);
+  lua_Integer (*dll_lua_tointegerx) (lua_State *L, int idx, int *isnum);
+  void (*dll_lua_callk) (lua_State *L, int nargs, int nresults, int ctx,
+!         lua_CFunction k);
+  int (*dll_lua_pcallk) (lua_State *L, int nargs, int nresults, int errfunc,
+!         int ctx, lua_CFunction k);
+  void (*dll_lua_getglobal) (lua_State *L, const char *var);
+  void (*dll_lua_setglobal) (lua_State *L, const char *var);
+  #endif
+--- 199,207 ----
+  lua_Number (*dll_lua_tonumberx) (lua_State *L, int idx, int *isnum);
+  lua_Integer (*dll_lua_tointegerx) (lua_State *L, int idx, int *isnum);
+  void (*dll_lua_callk) (lua_State *L, int nargs, int nresults, int ctx,
+! 	lua_CFunction k);
+  int (*dll_lua_pcallk) (lua_State *L, int nargs, int nresults, int errfunc,
+! 	int ctx, lua_CFunction k);
+  void (*dll_lua_getglobal) (lua_State *L, const char *var);
+  void (*dll_lua_setglobal) (lua_State *L, const char *var);
+  #endif
+***************
+*** 394,400 ****
+  luaL_typeerror (lua_State *L, int narg, const char *tname)
+  {
+      const char *msg = lua_pushfstring(L, "%s expected, got %s",
+!             tname, luaL_typename(L, narg));
+      return luaL_argerror(L, narg, msg);
+  }
+  #endif
+--- 394,400 ----
+  luaL_typeerror (lua_State *L, int narg, const char *tname)
+  {
+      const char *msg = lua_pushfstring(L, "%s expected, got %s",
+! 	    tname, luaL_typename(L, narg));
+      return luaL_argerror(L, narg, msg);
+  }
+  #endif
+***************
+*** 646,786 ****
+  	return 1; \
+      }
+  
+- 
+- /* adapted from eval.c */
+- 
+- #define listitem_alloc() (listitem_T *)alloc(sizeof(listitem_T))
+- 
+-     static listitem_T *
+- list_find (list_T *l, long n)
+- {
+-     listitem_T *li;
+-     if (l == NULL || n < -l->lv_len || n >= l->lv_len)
+- 	return NULL;
+-     if (n < 0) /* search backward? */
+- 	for (li = l->lv_last; n < -1; li = li->li_prev)
+- 	    n++;
+-     else /* search forward */
+- 	for (li = l->lv_first; n > 0; li = li->li_next)
+- 	    n--;
+-     return li;
+- }
+- 
+-     static void
+- list_remove (list_T *l, listitem_T *li)
+- {
+-     listwatch_T *lw;
+-     --l->lv_len;
+-     /* fix watchers */
+-     for (lw = l->lv_watch; lw != NULL; lw = lw->lw_next)
+- 	if (lw->lw_item == li)
+- 	    lw->lw_item = li->li_next;
+-     /* fix list pointers */
+-     if (li->li_next == NULL) /* last? */
+- 	l->lv_last = li->li_prev;
+-     else
+- 	li->li_next->li_prev = li->li_prev;
+-     if (li->li_prev == NULL) /* first? */
+- 	l->lv_first = li->li_next;
+-     else
+- 	li->li_prev->li_next = li->li_next;
+-     l->lv_idx_item = NULL;
+- }
+- 
+-     static void
+- list_append(list_T *l, listitem_T *item)
+- {
+-     if (l->lv_last == NULL) /* empty list? */
+- 	l->lv_first = item;
+-     else
+- 	l->lv_last->li_next = item;
+-     item->li_prev = l->lv_last;
+-     item->li_next = NULL;
+-     l->lv_last = item;
+-     ++l->lv_len;
+- }
+- 
+-     static int
+- list_insert_tv(list_T *l, typval_T *tv, listitem_T *item)
+- {
+-     listitem_T	*ni = listitem_alloc();
+- 
+-     if (ni == NULL)
+- 	return FAIL;
+-     copy_tv(tv, &ni->li_tv);
+-     if (item == NULL)
+- 	list_append(l, ni);
+-     else
+-     {
+- 	ni->li_prev = item->li_prev;
+- 	ni->li_next = item;
+- 	if (item->li_prev == NULL)
+- 	{
+- 	    l->lv_first = ni;
+- 	    ++l->lv_idx;
+- 	}
+- 	else
+- 	{
+- 	    item->li_prev->li_next = ni;
+- 	    l->lv_idx_item = NULL;
+- 	}
+- 	item->li_prev = ni;
+- 	++l->lv_len;
+-     }
+-     return OK;
+- }
+- 
+- /* set references */
+- 
+- static void set_ref_in_tv (typval_T *tv, int copyID);
+- 
+-     static void
+- set_ref_in_dict(dict_T *d, int copyID)
+- {
+-     hashtab_T *ht = &d->dv_hashtab;
+-     int n = ht->ht_used;
+-     hashitem_T *hi;
+-     for (hi = ht->ht_array; n > 0; ++hi)
+- 	if (!HASHITEM_EMPTY(hi))
+- 	{
+- 	    dictitem_T *di = dict_lookup(hi);
+- 	    set_ref_in_tv(&di->di_tv, copyID);
+- 	    --n;
+- 	}
+- }
+- 
+-     static void
+- set_ref_in_list(list_T *l, int copyID)
+- {
+-     listitem_T *li;
+-     for (li = l->lv_first; li != NULL; li = li->li_next)
+- 	set_ref_in_tv(&li->li_tv, copyID);
+- }
+- 
+-     static void
+- set_ref_in_tv(typval_T *tv, int copyID)
+- {
+-     if (tv->v_type == VAR_LIST)
+-     {
+- 	list_T *l = tv->vval.v_list;
+- 	if (l != NULL && l->lv_copyID != copyID)
+- 	{
+- 	    l->lv_copyID = copyID;
+- 	    set_ref_in_list(l, copyID);
+- 	}
+-     }
+-     else if (tv->v_type == VAR_DICT)
+-     {
+- 	dict_T *d = tv->vval.v_dict;
+- 	if (d != NULL && d->dv_copyID != copyID)
+- 	{
+- 	    d->dv_copyID = copyID;
+- 	    set_ref_in_dict(d, copyID);
+- 	}
+-     }
+- }
+- 
+- 
+  /* =======   List type   ======= */
+  
+      static luaV_List *
+--- 646,651 ----
+***************
+*** 876,882 ****
+      if (li == NULL) return 0;
+      if (lua_isnil(L, 3)) /* remove? */
+      {
+! 	list_remove(l, li);
+  	clear_tv(&li->li_tv);
+  	vim_free(li);
+      }
+--- 741,747 ----
+      if (li == NULL) return 0;
+      if (lua_isnil(L, 3)) /* remove? */
+      {
+! 	list_remove(l, li, li);
+  	clear_tv(&li->li_tv);
+  	vim_free(li);
+      }
+***************
+*** 904,911 ****
+  	typval_T v;
+  	lua_settop(L, 2);
+  	luaV_totypval(L, 2, &v);
+! 	copy_tv(&v, &li->li_tv);
+! 	list_append(l, li);
+      }
+      lua_settop(L, 1);
+      return 1;
+--- 769,775 ----
+  	typval_T v;
+  	lua_settop(L, 2);
+  	luaV_totypval(L, 2, &v);
+! 	list_append_tv(l, &v);
+      }
+      lua_settop(L, 1);
+      return 1;
+***************
+*** 1682,1688 ****
+  	    tv.vval.v_dict = (dict_T *) lua_touserdata(L, 4); /* key */
+  	}
+  	lua_pop(L, 2); /* metatable and value */
+! 	set_ref_in_tv(&tv, copyID);
+      }
+      return 0;
+  }
+--- 1546,1552 ----
+  	    tv.vval.v_dict = (dict_T *) lua_touserdata(L, 4); /* key */
+  	}
+  	lua_pop(L, 2); /* metatable and value */
+! 	set_ref_in_item(&tv, copyID);
+      }
+      return 0;
+  }
+*** ../vim-7.3.568/src/if_py_both.h	2012-04-20 13:31:16.000000000 +0200
+--- src/if_py_both.h	2012-06-29 12:03:52.000000000 +0200
+***************
+*** 1,4 ****
+! /* vi:set ts=8 sts=4 sw=4:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+--- 1,4 ----
+! /* vi:set ts=8 sts=4 sw=4 noet:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+***************
+*** 105,111 ****
+  	return NULL;
+      Py_INCREF(list);
+  
+!     if (!PyList_Check(list)) {
+  	PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	Py_DECREF(list);
+  	return NULL;
+--- 105,112 ----
+  	return NULL;
+      Py_INCREF(list);
+  
+!     if (!PyList_Check(list))
+!     {
+  	PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	Py_DECREF(list);
+  	return NULL;
+***************
+*** 119,125 ****
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "et#", ENC_OPT, &str, &len)) {
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+--- 120,127 ----
+  	char *str = NULL;
+  	PyInt len;
+  
+! 	if (!PyArg_Parse(line, "et#", ENC_OPT, &str, &len))
+! 	{
+  	    PyErr_SetString(PyExc_TypeError, _("writelines() requires list of strings"));
+  	    Py_DECREF(list);
+  	    return NULL;
+***************
+*** 297,303 ****
+  {
+      PyObject	*result;
+      PyObject	*newObj;
+!     char	ptrBuf[NUMBUFLEN];
+  
+      /* Avoid infinite recursion */
+      if (depth > 100)
+--- 299,305 ----
+  {
+      PyObject	*result;
+      PyObject	*newObj;
+!     char	ptrBuf[sizeof(void *) * 2 + 3];
+  
+      /* Avoid infinite recursion */
+      if (depth > 100)
+***************
+*** 312,320 ****
+      if ((our_tv->v_type == VAR_LIST && our_tv->vval.v_list != NULL)
+  	    || (our_tv->v_type == VAR_DICT && our_tv->vval.v_dict != NULL))
+      {
+! 	sprintf(ptrBuf, PRINTF_DECIMAL_LONG_U,
+! 		our_tv->v_type == VAR_LIST ? (long_u)our_tv->vval.v_list
+! 					   : (long_u)our_tv->vval.v_dict);
+  	result = PyDict_GetItemString(lookupDict, ptrBuf);
+  	if (result != NULL)
+  	{
+--- 314,322 ----
+      if ((our_tv->v_type == VAR_LIST && our_tv->vval.v_list != NULL)
+  	    || (our_tv->v_type == VAR_DICT && our_tv->vval.v_dict != NULL))
+      {
+! 	sprintf(ptrBuf, "%p",
+! 		our_tv->v_type == VAR_LIST ? (void *)our_tv->vval.v_list
+! 					   : (void *)our_tv->vval.v_dict);
+  	result = PyDict_GetItemString(lookupDict, ptrBuf);
+  	if (result != NULL)
+  	{
+***************
+*** 374,509 ****
+  	    hashitem_T	*hi;
+  	    dictitem_T	*di;
+  
+! 	    PyDict_SetItemString(lookupDict, ptrBuf, result);
+  
+! 	    for (hi = ht->ht_array; todo > 0; ++hi)
+  	    {
+! 		if (!HASHITEM_EMPTY(hi))
+! 		{
+! 		    --todo;
+! 
+! 		    di = dict_lookup(hi);
+! 		    newObj = VimToPython(&di->di_tv, depth + 1, lookupDict);
+! 		    PyDict_SetItemString(result, (char *)hi->hi_key, newObj);
+! 		    Py_DECREF(newObj);
+! 		}
+  	    }
+  	}
+      }
+!     else
+      {
+! 	Py_INCREF(Py_None);
+! 	result = Py_None;
+      }
+  
+!     return result;
+  }
+- #endif
+  
+      static PyObject *
+! VimEval(PyObject *self UNUSED, PyObject *args UNUSED)
+  {
+! #ifdef FEAT_EVAL
+!     char	*expr;
+!     typval_T	*our_tv;
+!     PyObject	*result;
+!     PyObject    *lookup_dict;
+  
+!     if (!PyArg_ParseTuple(args, "s", &expr))
+  	return NULL;
+  
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     our_tv = eval_expr((char_u *)expr, NULL);
+! 
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     if (our_tv == NULL)
+      {
+! 	PyErr_SetVim(_("invalid expression"));
+  	return NULL;
+      }
+  
+-     /* Convert the Vim type into a Python type.  Create a dictionary that's
+-      * used to check for recursive loops. */
+      lookup_dict = PyDict_New();
+!     result = VimToPython(our_tv, 1, lookup_dict);
+      Py_DECREF(lookup_dict);
+  
+! 
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     free_tv(our_tv);
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     return result;
+! #else
+!     PyErr_SetVim(_("expressions disabled at compile time"));
+!     return NULL;
+! #endif
+  }
+  
+! /*
+!  * Vim module - Definitions
+!  */
+! 
+! static struct PyMethodDef VimMethods[] = {
+!     /* name,	     function,		calling,    documentation */
+!     {"command",	     VimCommand,	1,	    "Execute a Vim ex-mode command" },
+!     {"eval",	     VimEval,		1,	    "Evaluate an expression using Vim evaluator" },
+!     { NULL,	     NULL,		0,	    NULL }
+  };
+  
+  typedef struct
+  {
+      PyObject_HEAD
+!     buf_T *buf;
+! }
+! BufferObject;
+  
+! #define INVALID_BUFFER_VALUE ((buf_T *)(-1))
+! 
+! /*
+!  * Buffer list object - Implementation
+!  */
+  
+!     static PyInt
+! BufListLength(PyObject *self UNUSED)
+  {
+!     buf_T	*b = firstbuf;
+!     PyInt	n = 0;
+  
+!     while (b)
+      {
+! 	++n;
+! 	b = b->b_next;
+      }
+! 
+!     return n;
+  }
+  
+      static PyObject *
+! BufListItem(PyObject *self UNUSED, PyInt n)
+  {
+!     buf_T *b;
+  
+!     for (b = firstbuf; b; b = b->b_next, --n)
+      {
+! 	if (n == 0)
+! 	    return BufferNew(b);
+      }
+  
+!     PyErr_SetString(PyExc_IndexError, _("no such buffer"));
+!     return NULL;
+  }
+  
+! typedef struct
+! {
+!     PyObject_HEAD
+!     win_T	*win;
+! } WindowObject;
+  
+  #define INVALID_WINDOW_VALUE ((win_T *)(-1))
+  
+--- 376,1325 ----
+  	    hashitem_T	*hi;
+  	    dictitem_T	*di;
+  
+! 	    PyDict_SetItemString(lookupDict, ptrBuf, result);
+! 
+! 	    for (hi = ht->ht_array; todo > 0; ++hi)
+! 	    {
+! 		if (!HASHITEM_EMPTY(hi))
+! 		{
+! 		    --todo;
+! 
+! 		    di = dict_lookup(hi);
+! 		    newObj = VimToPython(&di->di_tv, depth + 1, lookupDict);
+! 		    PyDict_SetItemString(result, (char *)hi->hi_key, newObj);
+! 		    Py_DECREF(newObj);
+! 		}
+! 	    }
+! 	}
+!     }
+!     else
+!     {
+! 	Py_INCREF(Py_None);
+! 	result = Py_None;
+!     }
+! 
+!     return result;
+! }
+! #endif
+! 
+!     static PyObject *
+! VimEval(PyObject *self UNUSED, PyObject *args UNUSED)
+! {
+! #ifdef FEAT_EVAL
+!     char	*expr;
+!     typval_T	*our_tv;
+!     PyObject	*result;
+!     PyObject    *lookup_dict;
+! 
+!     if (!PyArg_ParseTuple(args, "s", &expr))
+! 	return NULL;
+! 
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     our_tv = eval_expr((char_u *)expr, NULL);
+! 
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     if (our_tv == NULL)
+!     {
+! 	PyErr_SetVim(_("invalid expression"));
+! 	return NULL;
+!     }
+! 
+!     /* Convert the Vim type into a Python type.  Create a dictionary that's
+!      * used to check for recursive loops. */
+!     lookup_dict = PyDict_New();
+!     result = VimToPython(our_tv, 1, lookup_dict);
+!     Py_DECREF(lookup_dict);
+! 
+! 
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     free_tv(our_tv);
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     return result;
+! #else
+!     PyErr_SetVim(_("expressions disabled at compile time"));
+!     return NULL;
+! #endif
+! }
+! 
+! static PyObject *ConvertToPyObject(typval_T *);
+! 
+!     static PyObject *
+! VimEvalPy(PyObject *self UNUSED, PyObject *args UNUSED)
+! {
+! #ifdef FEAT_EVAL
+!     char	*expr;
+!     typval_T	*our_tv;
+!     PyObject	*result;
+! 
+!     if (!PyArg_ParseTuple(args, "s", &expr))
+! 	return NULL;
+! 
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     our_tv = eval_expr((char_u *)expr, NULL);
+! 
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     if (our_tv == NULL)
+!     {
+! 	PyErr_SetVim(_("invalid expression"));
+! 	return NULL;
+!     }
+! 
+!     result = ConvertToPyObject(our_tv);
+!     Py_BEGIN_ALLOW_THREADS
+!     Python_Lock_Vim();
+!     free_tv(our_tv);
+!     Python_Release_Vim();
+!     Py_END_ALLOW_THREADS
+! 
+!     return result;
+! #else
+!     PyErr_SetVim(_("expressions disabled at compile time"));
+!     return NULL;
+! #endif
+! }
+! 
+!     static PyObject *
+! VimStrwidth(PyObject *self UNUSED, PyObject *args)
+! {
+!     char	*expr;
+! 
+!     if (!PyArg_ParseTuple(args, "s", &expr))
+! 	return NULL;
+! 
+!     return PyLong_FromLong(mb_string2cells((char_u *)expr, STRLEN(expr)));
+! }
+! 
+! /*
+!  * Vim module - Definitions
+!  */
+! 
+! static struct PyMethodDef VimMethods[] = {
+!     /* name,	     function,		calling,    documentation */
+!     {"command",	     VimCommand,	1,	    "Execute a Vim ex-mode command" },
+!     {"eval",	     VimEval,		1,	    "Evaluate an expression using Vim evaluator" },
+!     {"bindeval",     VimEvalPy,         1,          "Like eval(), but returns objects attached to vim ones"},
+!     {"strwidth",     VimStrwidth,       1,          "Screen string width, counts <Tab> as having width 1"},
+!     { NULL,	     NULL,		0,	    NULL }
+! };
+! 
+! typedef struct
+! {
+!     PyObject_HEAD
+!     buf_T *buf;
+! } BufferObject;
+! 
+! #define INVALID_BUFFER_VALUE ((buf_T *)(-1))
+! 
+! /*
+!  * Buffer list object - Implementation
+!  */
+! 
+!     static PyInt
+! BufListLength(PyObject *self UNUSED)
+! {
+!     buf_T	*b = firstbuf;
+!     PyInt	n = 0;
+! 
+!     while (b)
+!     {
+! 	++n;
+! 	b = b->b_next;
+!     }
+! 
+!     return n;
+! }
+! 
+!     static PyObject *
+! BufListItem(PyObject *self UNUSED, PyInt n)
+! {
+!     buf_T *b;
+! 
+!     for (b = firstbuf; b; b = b->b_next, --n)
+!     {
+! 	if (n == 0)
+! 	    return BufferNew(b);
+!     }
+! 
+!     PyErr_SetString(PyExc_IndexError, _("no such buffer"));
+!     return NULL;
+! }
+! 
+! typedef struct
+! {
+!     PyObject_HEAD
+!     win_T	*win;
+! } WindowObject;
+! 
+! static int ConvertFromPyObject(PyObject *, typval_T *);
+! static int _ConvertFromPyObject(PyObject *, typval_T *, PyObject *);
+! 
+! typedef struct pylinkedlist_S {
+!     struct pylinkedlist_S	*pll_next;
+!     struct pylinkedlist_S	*pll_prev;
+!     PyObject			*pll_obj;
+! } pylinkedlist_T;
+! 
+! static pylinkedlist_T *lastdict = NULL;
+! static pylinkedlist_T *lastlist = NULL;
+! 
+!     static void
+! pyll_remove(pylinkedlist_T *ref, pylinkedlist_T **last)
+! {
+!     if (ref->pll_prev == NULL)
+!     {
+! 	if (ref->pll_next == NULL)
+! 	{
+! 	    *last = NULL;
+! 	    return;
+! 	}
+!     }
+!     else
+! 	ref->pll_prev->pll_next = ref->pll_next;
+! 
+!     if (ref->pll_next == NULL)
+! 	*last = ref->pll_prev;
+!     else
+! 	ref->pll_next->pll_prev = ref->pll_prev;
+! }
+! 
+!     static void
+! pyll_add(PyObject *self, pylinkedlist_T *ref, pylinkedlist_T **last)
+! {
+!     if (*last == NULL)
+! 	ref->pll_prev = NULL;
+!     else
+!     {
+! 	(*last)->pll_next = ref;
+! 	ref->pll_prev = *last;
+!     }
+!     ref->pll_next = NULL;
+!     ref->pll_obj = self;
+!     *last = ref;
+! }
+! 
+! static PyTypeObject DictionaryType;
+! 
+! typedef struct
+! {
+!     PyObject_HEAD
+!     dict_T	*dict;
+!     pylinkedlist_T	ref;
+! } DictionaryObject;
+! 
+!     static PyObject *
+! DictionaryNew(dict_T *dict)
+! {
+!     DictionaryObject	*self;
+! 
+!     self = PyObject_NEW(DictionaryObject, &DictionaryType);
+!     if (self == NULL)
+! 	return NULL;
+!     self->dict = dict;
+!     ++dict->dv_refcount;
+! 
+!     pyll_add((PyObject *)(self), &self->ref, &lastdict);
+! 
+!     return (PyObject *)(self);
+! }
+! 
+!     static int
+! pydict_to_tv(PyObject *obj, typval_T *tv, PyObject *lookupDict)
+! {
+!     dict_T	*d;
+!     char_u	*key;
+!     dictitem_T	*di;
+!     PyObject	*keyObject;
+!     PyObject	*valObject;
+!     Py_ssize_t	iter = 0;
+! 
+!     d = dict_alloc();
+!     if (d == NULL)
+!     {
+! 	PyErr_NoMemory();
+! 	return -1;
+!     }
+! 
+!     tv->v_type = VAR_DICT;
+!     tv->vval.v_dict = d;
+! 
+!     while (PyDict_Next(obj, &iter, &keyObject, &valObject))
+!     {
+! 	DICTKEY_DECL
+! 
+! 	if (keyObject == NULL)
+! 	    return -1;
+! 	if (valObject == NULL)
+! 	    return -1;
+! 
+! 	DICTKEY_GET(-1)
+! 
+! 	di = dictitem_alloc(key);
+! 
+! 	DICTKEY_UNREF
+! 
+! 	if (di == NULL)
+! 	{
+! 	    PyErr_NoMemory();
+! 	    return -1;
+! 	}
+! 	di->di_tv.v_lock = 0;
+! 
+! 	if (_ConvertFromPyObject(valObject, &di->di_tv, lookupDict) == -1)
+! 	{
+! 	    vim_free(di);
+! 	    return -1;
+! 	}
+! 	if (dict_add(d, di) == FAIL)
+! 	{
+! 	    vim_free(di);
+! 	    PyErr_SetVim(_("failed to add key to dictionary"));
+! 	    return -1;
+! 	}
+!     }
+!     return 0;
+! }
+! 
+!     static int
+! pymap_to_tv(PyObject *obj, typval_T *tv, PyObject *lookupDict)
+! {
+!     dict_T	*d;
+!     char_u	*key;
+!     dictitem_T	*di;
+!     PyObject	*list;
+!     PyObject	*litem;
+!     PyObject	*keyObject;
+!     PyObject	*valObject;
+!     Py_ssize_t	lsize;
+! 
+!     d = dict_alloc();
+!     if (d == NULL)
+!     {
+! 	PyErr_NoMemory();
+! 	return -1;
+!     }
+! 
+!     tv->v_type = VAR_DICT;
+!     tv->vval.v_dict = d;
+! 
+!     list = PyMapping_Items(obj);
+!     lsize = PyList_Size(list);
+!     while (lsize--)
+!     {
+! 	DICTKEY_DECL
+! 
+! 	litem = PyList_GetItem(list, lsize);
+! 	if (litem == NULL)
+! 	{
+! 	    Py_DECREF(list);
+! 	    return -1;
+! 	}
+! 
+! 	keyObject = PyTuple_GetItem(litem, 0);
+! 	if (keyObject == NULL)
+! 	{
+! 	    Py_DECREF(list);
+! 	    Py_DECREF(litem);
+! 	    return -1;
+! 	}
+! 
+! 	DICTKEY_GET(-1)
+! 
+! 	valObject = PyTuple_GetItem(litem, 1);
+! 	if (valObject == NULL)
+! 	{
+! 	    Py_DECREF(list);
+! 	    Py_DECREF(litem);
+! 	    return -1;
+! 	}
+! 
+! 	di = dictitem_alloc(key);
+! 
+! 	DICTKEY_UNREF
+! 
+! 	if (di == NULL)
+! 	{
+! 	    Py_DECREF(list);
+! 	    Py_DECREF(litem);
+! 	    PyErr_NoMemory();
+! 	    return -1;
+! 	}
+! 	di->di_tv.v_lock = 0;
+! 
+! 	if (_ConvertFromPyObject(valObject, &di->di_tv, lookupDict) == -1)
+! 	{
+! 	    vim_free(di);
+! 	    Py_DECREF(list);
+! 	    Py_DECREF(litem);
+! 	    return -1;
+! 	}
+! 	if (dict_add(d, di) == FAIL)
+! 	{
+! 	    vim_free(di);
+! 	    Py_DECREF(list);
+! 	    Py_DECREF(litem);
+! 	    PyErr_SetVim(_("failed to add key to dictionary"));
+! 	    return -1;
+! 	}
+! 	Py_DECREF(litem);
+!     }
+!     Py_DECREF(list);
+!     return 0;
+! }
+! 
+!     static PyInt
+! DictionaryLength(PyObject *self)
+! {
+!     return ((PyInt) ((((DictionaryObject *)(self))->dict->dv_hashtab.ht_used)));
+! }
+! 
+!     static PyObject *
+! DictionaryItem(PyObject *self, PyObject *keyObject)
+! {
+!     char_u	*key;
+!     dictitem_T	*val;
+!     DICTKEY_DECL
+! 
+!     DICTKEY_GET(NULL)
+! 
+!     val = dict_find(((DictionaryObject *) (self))->dict, key, -1);
+! 
+!     DICTKEY_UNREF
+! 
+!     return ConvertToPyObject(&val->di_tv);
+! }
+! 
+!     static PyInt
+! DictionaryAssItem(PyObject *self, PyObject *keyObject, PyObject *valObject)
+! {
+!     char_u	*key;
+!     typval_T	tv;
+!     dict_T	*d = ((DictionaryObject *)(self))->dict;
+!     dictitem_T	*di;
+!     DICTKEY_DECL
+! 
+!     if (d->dv_lock)
+!     {
+! 	PyErr_SetVim(_("dict is locked"));
+! 	return -1;
+!     }
+! 
+!     DICTKEY_GET(-1)
+! 
+!     di = dict_find(d, key, -1);
+! 
+!     if (valObject == NULL)
+!     {
+! 	if (di == NULL)
+! 	{
+! 	    PyErr_SetString(PyExc_IndexError, _("no such key in dictionary"));
+! 	    return -1;
+! 	}
+! 	hashitem_T	*hi = hash_find(&d->dv_hashtab, di->di_key);
+! 	hash_remove(&d->dv_hashtab, hi);
+! 	dictitem_free(di);
+! 	return 0;
+!     }
+! 
+!     if (ConvertFromPyObject(valObject, &tv) == -1)
+!     {
+! 	return -1;
+!     }
+! 
+!     if (di == NULL)
+!     {
+! 	di = dictitem_alloc(key);
+! 	if (di == NULL)
+! 	{
+! 	    PyErr_NoMemory();
+! 	    return -1;
+! 	}
+! 	di->di_tv.v_lock = 0;
+! 
+! 	if (dict_add(d, di) == FAIL)
+! 	{
+! 	    vim_free(di);
+! 	    PyErr_SetVim(_("failed to add key to dictionary"));
+! 	    return -1;
+! 	}
+!     }
+!     else
+! 	clear_tv(&di->di_tv);
+! 
+!     DICTKEY_UNREF
+! 
+!     copy_tv(&tv, &di->di_tv);
+!     return 0;
+! }
+! 
+!     static PyObject *
+! DictionaryListKeys(PyObject *self)
+! {
+!     dict_T	*dict = ((DictionaryObject *)(self))->dict;
+!     long_u	todo = dict->dv_hashtab.ht_used;
+!     Py_ssize_t	i = 0;
+!     PyObject	*r;
+!     hashitem_T	*hi;
+! 
+!     r = PyList_New(todo);
+!     for (hi = dict->dv_hashtab.ht_array; todo > 0; ++hi)
+!     {
+! 	if (!HASHITEM_EMPTY(hi))
+! 	{
+! 	    PyList_SetItem(r, i, PyBytes_FromString((char *)(hi->hi_key)));
+! 	    --todo;
+! 	    ++i;
+! 	}
+!     }
+!     return r;
+! }
+! 
+! static struct PyMethodDef DictionaryMethods[] = {
+!     {"keys", (PyCFunction)DictionaryListKeys, METH_NOARGS, ""},
+!     { NULL,	    NULL,		0,	    NULL }
+! };
+! 
+! static PyTypeObject ListType;
+! 
+! typedef struct
+! {
+!     PyObject_HEAD
+!     list_T	*list;
+!     pylinkedlist_T	ref;
+! } ListObject;
+! 
+!     static PyObject *
+! ListNew(list_T *list)
+! {
+!     ListObject	*self;
+! 
+!     self = PyObject_NEW(ListObject, &ListType);
+!     if (self == NULL)
+! 	return NULL;
+!     self->list = list;
+!     ++list->lv_refcount;
+! 
+!     pyll_add((PyObject *)(self), &self->ref, &lastlist);
+! 
+!     return (PyObject *)(self);
+! }
+! 
+!     static int
+! list_py_concat(list_T *l, PyObject *obj, PyObject *lookupDict)
+! {
+!     Py_ssize_t	i;
+!     Py_ssize_t	lsize = PySequence_Size(obj);
+!     PyObject	*litem;
+!     listitem_T	*li;
+! 
+!     for(i=0; i<lsize; i++)
+!     {
+! 	li = listitem_alloc();
+! 	if (li == NULL)
+! 	{
+! 	    PyErr_NoMemory();
+! 	    return -1;
+! 	}
+! 	li->li_tv.v_lock = 0;
+! 
+! 	litem = PySequence_GetItem(obj, i);
+! 	if (litem == NULL)
+! 	    return -1;
+! 	if (_ConvertFromPyObject(litem, &li->li_tv, lookupDict) == -1)
+! 	    return -1;
+! 
+! 	list_append(l, li);
+!     }
+!     return 0;
+! }
+! 
+!     static int
+! pyseq_to_tv(PyObject *obj, typval_T *tv, PyObject *lookupDict)
+! {
+!     list_T	*l;
+! 
+!     l = list_alloc();
+!     if (l == NULL)
+!     {
+! 	PyErr_NoMemory();
+! 	return -1;
+!     }
+! 
+!     tv->v_type = VAR_LIST;
+!     tv->vval.v_list = l;
+! 
+!     if (list_py_concat(l, obj, lookupDict) == -1)
+! 	return -1;
+! 
+!     return 0;
+! }
+! 
+!     static int
+! pyiter_to_tv(PyObject *obj, typval_T *tv, PyObject *lookupDict)
+! {
+!     PyObject	*iterator = PyObject_GetIter(obj);
+!     PyObject	*item;
+!     list_T	*l;
+!     listitem_T	*li;
+! 
+!     l = list_alloc();
+! 
+!     if (l == NULL)
+!     {
+! 	PyErr_NoMemory();
+! 	return -1;
+!     }
+! 
+!     tv->vval.v_list = l;
+!     tv->v_type = VAR_LIST;
+! 
+! 
+!     if (iterator == NULL)
+! 	return -1;
+! 
+!     while ((item = PyIter_Next(obj)))
+!     {
+! 	li = listitem_alloc();
+! 	if (li == NULL)
+! 	{
+! 	    PyErr_NoMemory();
+! 	    return -1;
+! 	}
+! 	li->li_tv.v_lock = 0;
+! 
+! 	if (_ConvertFromPyObject(item, &li->li_tv, lookupDict) == -1)
+! 	    return -1;
+! 
+! 	list_append(l, li);
+! 
+! 	Py_DECREF(item);
+!     }
+! 
+!     Py_DECREF(iterator);
+!     return 0;
+! }
+! 
+!     static PyInt
+! ListLength(PyObject *self)
+! {
+!     return ((PyInt) (((ListObject *) (self))->list->lv_len));
+! }
+! 
+!     static PyObject *
+! ListItem(PyObject *self, Py_ssize_t index)
+! {
+!     listitem_T	*li;
+! 
+!     if (index>=ListLength(self))
+!     {
+! 	PyErr_SetString(PyExc_IndexError, "list index out of range");
+! 	return NULL;
+!     }
+!     li = list_find(((ListObject *) (self))->list, (long) index);
+!     if (li == NULL)
+!     {
+! 	PyErr_SetVim(_("internal error: failed to get vim list item"));
+! 	return NULL;
+!     }
+!     return ConvertToPyObject(&li->li_tv);
+! }
+! 
+! #define PROC_RANGE \
+!     if (last < 0) {\
+! 	if (last < -size) \
+! 	    last = 0; \
+! 	else \
+! 	    last += size; \
+!     } \
+!     if (first < 0) \
+! 	first = 0; \
+!     if (first > size) \
+! 	first = size; \
+!     if (last > size) \
+! 	last = size;
+! 
+!     static PyObject *
+! ListSlice(PyObject *self, Py_ssize_t first, Py_ssize_t last)
+! {
+!     PyInt	i;
+!     PyInt	size = ListLength(self);
+!     PyInt	n;
+!     PyObject	*list;
+!     int		reversed = 0;
+! 
+!     PROC_RANGE
+!     if (first >= last)
+! 	first = last;
+! 
+!     n = last-first;
+!     list = PyList_New(n);
+!     if (list == NULL)
+! 	return NULL;
+! 
+!     for (i = 0; i < n; ++i)
+!     {
+! 	PyObject	*item = ListItem(self, i);
+! 	if (item == NULL)
+! 	{
+! 	    Py_DECREF(list);
+! 	    return NULL;
+! 	}
+! 
+! 	if ((PyList_SetItem(list, ((reversed)?(n-i-1):(i)), item)))
+! 	{
+! 	    Py_DECREF(item);
+! 	    Py_DECREF(list);
+! 	    return NULL;
+! 	}
+!     }
+! 
+!     return list;
+! }
+! 
+!     static int
+! ListAssItem(PyObject *self, Py_ssize_t index, PyObject *obj)
+! {
+!     typval_T	tv;
+!     list_T	*l = ((ListObject *) (self))->list;
+!     listitem_T	*li;
+!     Py_ssize_t	length = ListLength(self);
+! 
+!     if (l->lv_lock)
+!     {
+! 	PyErr_SetVim(_("list is locked"));
+! 	return -1;
+!     }
+!     if (index>length || (index==length && obj==NULL))
+!     {
+! 	PyErr_SetString(PyExc_IndexError, "list index out of range");
+! 	return -1;
+!     }
+! 
+!     if (obj == NULL)
+!     {
+! 	li = list_find(l, (long) index);
+! 	list_remove(l, li, li);
+! 	clear_tv(&li->li_tv);
+! 	vim_free(li);
+! 	return 0;
+!     }
+! 
+!     if (ConvertFromPyObject(obj, &tv) == -1)
+! 	return -1;
+! 
+!     if (index == length)
+!     {
+! 	if (list_append_tv(l, &tv) == FAIL)
+! 	{
+! 	    PyErr_SetVim(_("Failed to add item to list"));
+! 	    return -1;
+! 	}
+!     }
+!     else
+!     {
+! 	li = list_find(l, (long) index);
+! 	clear_tv(&li->li_tv);
+! 	copy_tv(&tv, &li->li_tv);
+!     }
+!     return 0;
+! }
+! 
+!     static int
+! ListAssSlice(PyObject *self, Py_ssize_t first, Py_ssize_t last, PyObject *obj)
+! {
+!     PyInt	size = ListLength(self);
+!     Py_ssize_t	i;
+!     Py_ssize_t	lsize;
+!     PyObject	*litem;
+!     listitem_T	*li;
+!     listitem_T	*next;
+!     typval_T	v;
+!     list_T	*l = ((ListObject *) (self))->list;
+! 
+!     if (l->lv_lock)
+!     {
+! 	PyErr_SetVim(_("list is locked"));
+! 	return -1;
+!     }
+! 
+!     PROC_RANGE
+  
+!     if (first == size)
+! 	li = NULL;
+!     else
+!     {
+! 	li = list_find(l, (long) first);
+! 	if (li == NULL)
+! 	{
+! 	    PyErr_SetVim(_("internal error: no vim list item"));
+! 	    return -1;
+! 	}
+! 	if (last > first)
+! 	{
+! 	    i = last - first;
+! 	    while (i-- && li != NULL)
+  	    {
+! 		next = li->li_next;
+! 		listitem_remove(l, li);
+! 		li = next;
+  	    }
+  	}
+      }
+! 
+!     if (obj == NULL)
+! 	return 0;
+! 
+!     if (!PyList_Check(obj))
+      {
+! 	PyErr_SetString(PyExc_TypeError, _("can only assign lists to slice"));
+! 	return -1;
+      }
+  
+!     lsize = PyList_Size(obj);
+! 
+!     for(i=0; i<lsize; i++)
+!     {
+! 	litem = PyList_GetItem(obj, i);
+! 	if (litem == NULL)
+! 	    return -1;
+! 	if (ConvertFromPyObject(litem, &v) == -1)
+! 	    return -1;
+! 	if (list_insert_tv(l, &v, li) == FAIL)
+! 	{
+! 	    PyErr_SetVim(_("internal error: failed to add item to list"));
+! 	    return -1;
+! 	}
+!     }
+!     return 0;
+  }
+  
+      static PyObject *
+! ListConcatInPlace(PyObject *self, PyObject *obj)
+  {
+!     list_T	*l = ((ListObject *) (self))->list;
+!     PyObject	*lookup_dict;
+  
+!     if (l->lv_lock)
+!     {
+! 	PyErr_SetVim(_("list is locked"));
+  	return NULL;
++     }
+  
+!     if (!PySequence_Check(obj))
+      {
+! 	PyErr_SetString(PyExc_TypeError, _("can only concatenate with lists"));
+  	return NULL;
+      }
+  
+      lookup_dict = PyDict_New();
+!     if (list_py_concat(l, obj, lookup_dict) == -1)
+!     {
+! 	Py_DECREF(lookup_dict);
+! 	return NULL;
+!     }
+      Py_DECREF(lookup_dict);
+  
+!     Py_INCREF(self);
+!     return self;
+  }
+  
+! static struct PyMethodDef ListMethods[] = {
+!     {"extend", (PyCFunction)ListConcatInPlace, METH_O, ""},
+!     { NULL,	    NULL,		0,	    NULL }
+  };
+  
+  typedef struct
+  {
+      PyObject_HEAD
+!     char_u	*name;
+! } FunctionObject;
+  
+! static PyTypeObject FunctionType;
+  
+!     static PyObject *
+! FunctionNew(char_u *name)
+  {
+!     FunctionObject	*self;
+  
+!     self = PyObject_NEW(FunctionObject, &FunctionType);
+!     if (self == NULL)
+! 	return NULL;
+!     self->name = PyMem_New(char_u, STRLEN(name) + 1);
+!     if (self->name == NULL)
+      {
+! 	PyErr_NoMemory();
+! 	return NULL;
+      }
+!     STRCPY(self->name, name);
+!     func_ref(name);
+!     return (PyObject *)(self);
+  }
+  
+      static PyObject *
+! FunctionCall(PyObject *self, PyObject *argsObject, PyObject *kwargs)
+  {
+!     FunctionObject	*this = (FunctionObject *)(self);
+!     char_u	*name = this->name;
+!     typval_T	args;
+!     typval_T	selfdicttv;
+!     typval_T	rettv;
+!     dict_T	*selfdict = NULL;
+!     PyObject	*selfdictObject;
+!     PyObject	*result;
+!     int		error;
+  
+!     if (ConvertFromPyObject(argsObject, &args) == -1)
+! 	return NULL;
+! 
+!     if (kwargs != NULL)
+      {
+! 	selfdictObject = PyDict_GetItemString(kwargs, "self");
+! 	if (selfdictObject != NULL)
+! 	{
+! 	    if (!PyDict_Check(selfdictObject))
+! 	    {
+! 		PyErr_SetString(PyExc_TypeError, _("'self' argument must be a dictionary"));
+! 		clear_tv(&args);
+! 		return NULL;
+! 	    }
+! 	    if (ConvertFromPyObject(selfdictObject, &selfdicttv) == -1)
+! 		return NULL;
+! 	    selfdict = selfdicttv.vval.v_dict;
+! 	}
+      }
+  
+!     error = func_call(name, &args, selfdict, &rettv);
+!     if (error != OK)
+!     {
+! 	result = NULL;
+! 	PyErr_SetVim(_("failed to run function"));
+!     }
+!     else
+! 	result = ConvertToPyObject(&rettv);
+! 
+!     /* FIXME Check what should really be cleared. */
+!     clear_tv(&args);
+!     clear_tv(&rettv);
+!     /*
+!      * if (selfdict!=NULL)
+!      *     clear_tv(selfdicttv);
+!      */
+! 
+!     return result;
+  }
+  
+! static struct PyMethodDef FunctionMethods[] = {
+!     {"__call__",    (PyCFunction)FunctionCall, METH_VARARGS|METH_KEYWORDS, ""},
+!     { NULL,	    NULL,		0,	    NULL }
+! };
+  
+  #define INVALID_WINDOW_VALUE ((win_T *)(-1))
+  
+***************
+*** 1567,1569 ****
+--- 2383,2638 ----
+      { NULL,	    NULL,		0,	    NULL }
+  };
+  
++     static void
++ set_ref_in_py(const int copyID)
++ {
++     pylinkedlist_T	*cur;
++     dict_T	*dd;
++     list_T	*ll;
++ 
++     if (lastdict != NULL)
++ 	for(cur = lastdict ; cur != NULL ; cur = cur->pll_prev)
++ 	{
++ 	    dd = ((DictionaryObject *) (cur->pll_obj))->dict;
++ 	    if (dd->dv_copyID != copyID)
++ 	    {
++ 		dd->dv_copyID = copyID;
++ 		set_ref_in_ht(&dd->dv_hashtab, copyID);
++ 	    }
++ 	}
++ 
++     if (lastlist != NULL)
++ 	for(cur = lastlist ; cur != NULL ; cur = cur->pll_prev)
++ 	{
++ 	    ll = ((ListObject *) (cur->pll_obj))->list;
++ 	    if (ll->lv_copyID != copyID)
++ 	    {
++ 		ll->lv_copyID = copyID;
++ 		set_ref_in_list(ll, copyID);
++ 	    }
++ 	}
++ }
++ 
++     static int
++ set_string_copy(char_u *str, typval_T *tv)
++ {
++     tv->vval.v_string = vim_strsave(str);
++     if (tv->vval.v_string == NULL)
++     {
++ 	PyErr_NoMemory();
++ 	return -1;
++     }
++     return 0;
++ }
++ 
++ #ifdef FEAT_EVAL
++ typedef int (*pytotvfunc)(PyObject *, typval_T *, PyObject *);
++ 
++     static int
++ convert_dl(PyObject *obj, typval_T *tv,
++ 				    pytotvfunc py_to_tv, PyObject *lookupDict)
++ {
++     PyObject	*capsule;
++     char	hexBuf[sizeof(void *) * 2 + 3];
++ 
++     sprintf(hexBuf, "%p", obj);
++ 
++     capsule = PyDict_GetItemString(lookupDict, hexBuf);
++     if (capsule == NULL)
++     {
++ 	capsule = PyCapsule_New(tv, NULL, NULL);
++ 	PyDict_SetItemString(lookupDict, hexBuf, capsule);
++ 	Py_DECREF(capsule);
++ 	if (py_to_tv(obj, tv, lookupDict) == -1)
++ 	{
++ 	    tv->v_type = VAR_UNKNOWN;
++ 	    return -1;
++ 	}
++ 	/* As we are not using copy_tv which increments reference count we must
++ 	 * do it ourself. */
++ 	switch(tv->v_type)
++ 	{
++ 	    case VAR_DICT: ++tv->vval.v_dict->dv_refcount; break;
++ 	    case VAR_LIST: ++tv->vval.v_list->lv_refcount; break;
++ 	}
++     }
++     else
++     {
++ 	typval_T	*v = PyCapsule_GetPointer(capsule, NULL);
++ 	copy_tv(v, tv);
++     }
++     return 0;
++ }
++ 
++     static int
++ ConvertFromPyObject(PyObject *obj, typval_T *tv)
++ {
++     PyObject	*lookup_dict;
++     int		r;
++ 
++     lookup_dict = PyDict_New();
++     r = _ConvertFromPyObject(obj, tv, lookup_dict);
++     Py_DECREF(lookup_dict);
++     return r;
++ }
++ 
++     static int
++ _ConvertFromPyObject(PyObject *obj, typval_T *tv, PyObject *lookupDict)
++ {
++     if (obj->ob_type == &DictionaryType)
++     {
++ 	tv->v_type = VAR_DICT;
++ 	tv->vval.v_dict = (((DictionaryObject *)(obj))->dict);
++ 	++tv->vval.v_dict->dv_refcount;
++     }
++     else if (obj->ob_type == &ListType)
++     {
++ 	tv->v_type = VAR_LIST;
++ 	tv->vval.v_list = (((ListObject *)(obj))->list);
++ 	++tv->vval.v_list->lv_refcount;
++     }
++     else if (obj->ob_type == &FunctionType)
++     {
++ 	if (set_string_copy(((FunctionObject *) (obj))->name, tv) == -1)
++ 	    return -1;
++ 
++ 	tv->v_type = VAR_FUNC;
++ 	func_ref(tv->vval.v_string);
++     }
++ #if PY_MAJOR_VERSION >= 3
++     else if (PyBytes_Check(obj))
++     {
++ 	char_u	*result = (char_u *) PyBytes_AsString(obj);
++ 
++ 	if (result == NULL)
++ 	    return -1;
++ 
++ 	if (set_string_copy(result, tv) == -1)
++ 	    return -1;
++ 
++ 	tv->v_type = VAR_STRING;
++     }
++     else if (PyUnicode_Check(obj))
++     {
++ 	PyObject	*bytes;
++ 	char_u	*result;
++ 
++ 	bytes = PyString_AsBytes(obj);
++ 	if (bytes == NULL)
++ 	    return -1;
++ 
++ 	result = (char_u *) PyBytes_AsString(bytes);
++ 	if (result == NULL)
++ 	    return -1;
++ 
++ 	if (set_string_copy(result, tv) == -1)
++ 	{
++ 	    Py_XDECREF(bytes);
++ 	    return -1;
++ 	}
++ 	Py_XDECREF(bytes);
++ 
++ 	tv->v_type = VAR_STRING;
++     }
++ #else
++     else if (PyUnicode_Check(obj))
++     {
++ 	PyObject	*bytes;
++ 	char_u	*result;
++ 
++ 	bytes = PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, NULL);
++ 	if (bytes == NULL)
++ 	    return -1;
++ 
++ 	result=(char_u *) PyString_AsString(bytes);
++ 	if (result == NULL)
++ 	    return -1;
++ 
++ 	if (set_string_copy(result, tv) == -1)
++ 	{
++ 	    Py_XDECREF(bytes);
++ 	    return -1;
++ 	}
++ 	Py_XDECREF(bytes);
++ 
++ 	tv->v_type = VAR_STRING;
++     }
++     else if (PyString_Check(obj))
++     {
++ 	char_u	*result = (char_u *) PyString_AsString(obj);
++ 
++ 	if (result == NULL)
++ 	    return -1;
++ 
++ 	if (set_string_copy(result, tv) == -1)
++ 	    return -1;
++ 
++ 	tv->v_type = VAR_STRING;
++     }
++     else if (PyInt_Check(obj))
++     {
++ 	tv->v_type = VAR_NUMBER;
++ 	tv->vval.v_number = (varnumber_T) PyInt_AsLong(obj);
++     }
++ #endif
++     else if (PyLong_Check(obj))
++     {
++ 	tv->v_type = VAR_NUMBER;
++ 	tv->vval.v_number = (varnumber_T) PyLong_AsLong(obj);
++     }
++     else if (PyDict_Check(obj))
++ 	return convert_dl(obj, tv, pydict_to_tv, lookupDict);
++ #ifdef FEAT_FLOAT
++     else if (PyFloat_Check(obj))
++     {
++ 	tv->v_type = VAR_FLOAT;
++ 	tv->vval.v_float = (float_T) PyFloat_AsDouble(obj);
++     }
++ #endif
++     else if (PyIter_Check(obj))
++ 	return convert_dl(obj, tv, pyiter_to_tv, lookupDict);
++     else if (PySequence_Check(obj))
++ 	return convert_dl(obj, tv, pyseq_to_tv, lookupDict);
++     else if (PyMapping_Check(obj))
++ 	return convert_dl(obj, tv, pymap_to_tv, lookupDict);
++     else
++     {
++ 	PyErr_SetString(PyExc_TypeError, _("unable to convert to vim structure"));
++ 	return -1;
++     }
++     return 0;
++ }
++ 
++     static PyObject *
++ ConvertToPyObject(typval_T *tv)
++ {
++     if (tv == NULL)
++     {
++ 	PyErr_SetVim(_("NULL reference passed"));
++ 	return NULL;
++     }
++     switch (tv->v_type)
++     {
++ 	case VAR_STRING:
++ 	    return PyBytes_FromString((char *) tv->vval.v_string);
++ 	case VAR_NUMBER:
++ 	    return PyLong_FromLong((long) tv->vval.v_number);
++ #ifdef FEAT_FLOAT
++ 	case VAR_FLOAT:
++ 	    return PyFloat_FromDouble((double) tv->vval.v_float);
++ #endif
++ 	case VAR_LIST:
++ 	    return ListNew(tv->vval.v_list);
++ 	case VAR_DICT:
++ 	    return DictionaryNew(tv->vval.v_dict);
++ 	case VAR_FUNC:
++ 	    return FunctionNew(tv->vval.v_string);
++ 	case VAR_UNKNOWN:
++ 	    Py_INCREF(Py_None);
++ 	    return Py_None;
++ 	default:
++ 	    PyErr_SetVim(_("internal error: invalid value type"));
++ 	    return NULL;
++     }
++ }
++ #endif
+*** ../vim-7.3.568/src/if_python.c	2011-08-28 16:00:14.000000000 +0200
+--- src/if_python.c	2012-06-29 12:47:48.000000000 +0200
+***************
+*** 1,4 ****
+! /* vi:set ts=8 sts=4 sw=4:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+--- 1,4 ----
+! /* vi:set ts=8 sts=4 sw=4 noet:
+   *
+   * VIM - Vi IMproved	by Bram Moolenaar
+   *
+***************
+*** 56,61 ****
+--- 56,63 ----
+  
+  static void init_structs(void);
+  
++ #define PyBytes_FromString PyString_FromString
++ 
+  /* No-op conversion functions, use with care! */
+  #define PyString_AsBytes(obj) (obj)
+  #define PyString_FreeBytes(obj)
+***************
+*** 122,132 ****
+--- 124,136 ----
+  /* This makes if_python.c compile without warnings against Python 2.5
+   * on Win32 and Win64. */
+  # undef PyRun_SimpleString
++ # undef PyRun_String
+  # undef PyArg_Parse
+  # undef PyArg_ParseTuple
+  # undef Py_BuildValue
+  # undef Py_InitModule4
+  # undef Py_InitModule4_64
++ # undef PyObject_CallMethod
+  
+  /*
+   * Wrapper defines
+***************
+*** 134,139 ****
+--- 138,144 ----
+  # define PyArg_Parse dll_PyArg_Parse
+  # define PyArg_ParseTuple dll_PyArg_ParseTuple
+  # define PyMem_Free dll_PyMem_Free
++ # define PyMem_Malloc dll_PyMem_Malloc
+  # define PyDict_SetItemString dll_PyDict_SetItemString
+  # define PyErr_BadArgument dll_PyErr_BadArgument
+  # define PyErr_Clear dll_PyErr_Clear
+***************
+*** 150,172 ****
+--- 155,202 ----
+  # endif
+  # define PyInt_AsLong dll_PyInt_AsLong
+  # define PyInt_FromLong dll_PyInt_FromLong
++ # define PyLong_AsLong dll_PyLong_AsLong
++ # define PyLong_FromLong dll_PyLong_FromLong
+  # define PyInt_Type (*dll_PyInt_Type)
++ # define PyLong_Type (*dll_PyLong_Type)
+  # define PyList_GetItem dll_PyList_GetItem
+  # define PyList_Append dll_PyList_Append
+  # define PyList_New dll_PyList_New
+  # define PyList_SetItem dll_PyList_SetItem
+  # define PyList_Size dll_PyList_Size
+  # define PyList_Type (*dll_PyList_Type)
++ # define PySequence_Check dll_PySequence_Check
++ # define PySequence_Size dll_PySequence_Size
++ # define PySequence_GetItem dll_PySequence_GetItem
++ # define PyTuple_Size dll_PyTuple_Size
++ # define PyTuple_GetItem dll_PyTuple_GetItem
++ # define PyTuple_Type (*dll_PyTuple_Type)
+  # define PyImport_ImportModule dll_PyImport_ImportModule
+  # define PyDict_New dll_PyDict_New
+  # define PyDict_GetItemString dll_PyDict_GetItemString
++ # define PyDict_Next dll_PyDict_Next
++ # ifdef PyMapping_Items
++ #  define PY_NO_MAPPING_ITEMS
++ # else
++ #  define PyMapping_Items dll_PyMapping_Items
++ # endif
++ # define PyObject_CallMethod dll_PyObject_CallMethod
++ # define PyMapping_Check dll_PyMapping_Check
++ # define PyIter_Next dll_PyIter_Next
+  # define PyModule_GetDict dll_PyModule_GetDict
+  # define PyRun_SimpleString dll_PyRun_SimpleString
++ # define PyRun_String dll_PyRun_String
+  # define PyString_AsString dll_PyString_AsString
+  # define PyString_FromString dll_PyString_FromString
+  # define PyString_FromStringAndSize dll_PyString_FromStringAndSize
+  # define PyString_Size dll_PyString_Size
+  # define PyString_Type (*dll_PyString_Type)
++ # define PyUnicode_Type (*dll_PyUnicode_Type)
++ # define PyUnicodeUCS4_AsEncodedString (*dll_PyUnicodeUCS4_AsEncodedString)
++ # define PyFloat_AsDouble dll_PyFloat_AsDouble
++ # define PyFloat_FromDouble dll_PyFloat_FromDouble
++ # define PyFloat_Type (*dll_PyFloat_Type)
++ # define PyImport_AddModule (*dll_PyImport_AddModule)
+  # define PySys_SetObject dll_PySys_SetObject
+  # define PySys_SetArgv dll_PySys_SetArgv
+  # define PyType_Type (*dll_PyType_Type)
+***************
+*** 179,186 ****
+--- 209,218 ----
+  # define Py_Finalize dll_Py_Finalize
+  # define Py_IsInitialized dll_Py_IsInitialized
+  # define _PyObject_New dll__PyObject_New
++ # define _PyObject_NextNotImplemented (*dll__PyObject_NextNotImplemented)
+  # define _Py_NoneStruct (*dll__Py_NoneStruct)
+  # define PyObject_Init dll__PyObject_Init
++ # define PyObject_GetIter dll_PyObject_GetIter
+  # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02020000
+  #  define PyType_IsSubtype dll_PyType_IsSubtype
+  # endif
+***************
+*** 188,193 ****
+--- 220,227 ----
+  #  define PyObject_Malloc dll_PyObject_Malloc
+  #  define PyObject_Free dll_PyObject_Free
+  # endif
++ # define PyCapsule_New dll_PyCapsule_New
++ # define PyCapsule_GetPointer dll_PyCapsule_GetPointer
+  
+  /*
+   * Pointers for dynamic link
+***************
+*** 195,200 ****
+--- 229,235 ----
+  static int(*dll_PyArg_Parse)(PyObject *, char *, ...);
+  static int(*dll_PyArg_ParseTuple)(PyObject *, char *, ...);
+  static int(*dll_PyMem_Free)(void *);
++ static void* (*dll_PyMem_Malloc)(size_t);
+  static int(*dll_PyDict_SetItemString)(PyObject *dp, char *key, PyObject *item);
+  static int(*dll_PyErr_BadArgument)(void);
+  static void(*dll_PyErr_Clear)(void);
+***************
+*** 208,233 ****
+  # ifdef PY_CAN_RECURSE
+  static PyGILState_STATE	(*dll_PyGILState_Ensure)(void);
+  static void (*dll_PyGILState_Release)(PyGILState_STATE);
+! #endif
+  static long(*dll_PyInt_AsLong)(PyObject *);
+  static PyObject*(*dll_PyInt_FromLong)(long);
+  static PyTypeObject* dll_PyInt_Type;
+  static PyObject*(*dll_PyList_GetItem)(PyObject *, PyInt);
+  static PyObject*(*dll_PyList_Append)(PyObject *, PyObject *);
+  static PyObject*(*dll_PyList_New)(PyInt size);
+  static int(*dll_PyList_SetItem)(PyObject *, PyInt, PyObject *);
+  static PyInt(*dll_PyList_Size)(PyObject *);
+  static PyTypeObject* dll_PyList_Type;
+  static PyObject*(*dll_PyImport_ImportModule)(const char *);
+  static PyObject*(*dll_PyDict_New)(void);
+  static PyObject*(*dll_PyDict_GetItemString)(PyObject *, const char *);
+  static PyObject*(*dll_PyModule_GetDict)(PyObject *);
+  static int(*dll_PyRun_SimpleString)(char *);
+  static char*(*dll_PyString_AsString)(PyObject *);
+  static PyObject*(*dll_PyString_FromString)(const char *);
+  static PyObject*(*dll_PyString_FromStringAndSize)(const char *, PyInt);
+  static PyInt(*dll_PyString_Size)(PyObject *);
+  static PyTypeObject* dll_PyString_Type;
+  static int(*dll_PySys_SetObject)(char *, PyObject *);
+  static int(*dll_PySys_SetArgv)(int, char **);
+  static PyTypeObject* dll_PyType_Type;
+--- 243,290 ----
+  # ifdef PY_CAN_RECURSE
+  static PyGILState_STATE	(*dll_PyGILState_Ensure)(void);
+  static void (*dll_PyGILState_Release)(PyGILState_STATE);
+! # endif
+  static long(*dll_PyInt_AsLong)(PyObject *);
+  static PyObject*(*dll_PyInt_FromLong)(long);
++ static long(*dll_PyLong_AsLong)(PyObject *);
++ static PyObject*(*dll_PyLong_FromLong)(long);
+  static PyTypeObject* dll_PyInt_Type;
++ static PyTypeObject* dll_PyLong_Type;
+  static PyObject*(*dll_PyList_GetItem)(PyObject *, PyInt);
+  static PyObject*(*dll_PyList_Append)(PyObject *, PyObject *);
+  static PyObject*(*dll_PyList_New)(PyInt size);
+  static int(*dll_PyList_SetItem)(PyObject *, PyInt, PyObject *);
+  static PyInt(*dll_PyList_Size)(PyObject *);
+  static PyTypeObject* dll_PyList_Type;
++ static int (*dll_PySequence_Check)(PyObject *);
++ static PyInt(*dll_PySequence_Size)(PyObject *);
++ static PyObject*(*dll_PySequence_GetItem)(PyObject *, PyInt);
++ static PyInt(*dll_PyTuple_Size)(PyObject *);
++ static PyObject*(*dll_PyTuple_GetItem)(PyObject *, PyInt);
++ static PyTypeObject* dll_PyTuple_Type;
+  static PyObject*(*dll_PyImport_ImportModule)(const char *);
+  static PyObject*(*dll_PyDict_New)(void);
+  static PyObject*(*dll_PyDict_GetItemString)(PyObject *, const char *);
++ static int (*dll_PyDict_Next)(PyObject *, Py_ssize_t *, PyObject **, PyObject **);
++ # ifndef PY_NO_MAPPING_ITEMS
++ static PyObject* (*dll_PyMapping_Items)(PyObject *);
++ # endif
++ static PyObject* (*dll_PyObject_CallMethod)(PyObject *, char *, PyObject *);
++ static int (*dll_PyMapping_Check)(PyObject *);
++ static PyObject* (*dll_PyIter_Next)(PyObject *);
+  static PyObject*(*dll_PyModule_GetDict)(PyObject *);
+  static int(*dll_PyRun_SimpleString)(char *);
++ static PyObject *(*dll_PyRun_String)(char *, int, PyObject *, PyObject *);
+  static char*(*dll_PyString_AsString)(PyObject *);
+  static PyObject*(*dll_PyString_FromString)(const char *);
+  static PyObject*(*dll_PyString_FromStringAndSize)(const char *, PyInt);
+  static PyInt(*dll_PyString_Size)(PyObject *);
+  static PyTypeObject* dll_PyString_Type;
++ static PyTypeObject* dll_PyUnicode_Type;
++ static PyObject *(*PyUnicodeUCS4_AsEncodedString)(PyObject *, char *, char *);
++ static double(*dll_PyFloat_AsDouble)(PyObject *);
++ static PyObject*(*dll_PyFloat_FromDouble)(double);
++ static PyTypeObject* dll_PyFloat_Type;
+  static int(*dll_PySys_SetObject)(char *, PyObject *);
+  static int(*dll_PySys_SetArgv)(int, char **);
+  static PyTypeObject* dll_PyType_Type;
+***************
+*** 235,246 ****
+--- 292,306 ----
+  static PyObject*(*dll_Py_BuildValue)(char *, ...);
+  static PyObject*(*dll_Py_FindMethod)(struct PyMethodDef[], PyObject *, char *);
+  static PyObject*(*dll_Py_InitModule4)(char *, struct PyMethodDef *, char *, PyObject *, int);
++ static PyObject*(*dll_PyImport_AddModule)(char *);
+  static void(*dll_Py_SetPythonHome)(char *home);
+  static void(*dll_Py_Initialize)(void);
+  static void(*dll_Py_Finalize)(void);
+  static int(*dll_Py_IsInitialized)(void);
+  static PyObject*(*dll__PyObject_New)(PyTypeObject *, PyObject *);
+  static PyObject*(*dll__PyObject_Init)(PyObject *, PyTypeObject *);
++ static PyObject* (*dll_PyObject_GetIter)(PyObject *);
++ static iternextfunc dll__PyObject_NextNotImplemented;
+  static PyObject* dll__Py_NoneStruct;
+  # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02020000
+  static int (*dll_PyType_IsSubtype)(PyTypeObject *, PyTypeObject *);
+***************
+*** 249,254 ****
+--- 309,316 ----
+  static void* (*dll_PyObject_Malloc)(size_t);
+  static void (*dll_PyObject_Free)(void*);
+  # endif
++ static PyObject* (*dll_PyCapsule_New)(void *, char *, PyCapsule_Destructor);
++ static void* (*dll_PyCapsule_GetPointer)(PyObject *, char *);
+  
+  static HINSTANCE hinstPython = 0; /* Instance of python.dll */
+  
+***************
+*** 278,283 ****
+--- 340,346 ----
+      {"PyArg_Parse", (PYTHON_PROC*)&dll_PyArg_Parse},
+      {"PyArg_ParseTuple", (PYTHON_PROC*)&dll_PyArg_ParseTuple},
+      {"PyMem_Free", (PYTHON_PROC*)&dll_PyMem_Free},
++     {"PyMem_Malloc", (PYTHON_PROC*)&dll_PyMem_Malloc},
+      {"PyDict_SetItemString", (PYTHON_PROC*)&dll_PyDict_SetItemString},
+      {"PyErr_BadArgument", (PYTHON_PROC*)&dll_PyErr_BadArgument},
+      {"PyErr_Clear", (PYTHON_PROC*)&dll_PyErr_Clear},
+***************
+*** 294,316 ****
+--- 357,402 ----
+  # endif
+      {"PyInt_AsLong", (PYTHON_PROC*)&dll_PyInt_AsLong},
+      {"PyInt_FromLong", (PYTHON_PROC*)&dll_PyInt_FromLong},
++     {"PyLong_AsLong", (PYTHON_PROC*)&dll_PyLong_AsLong},
++     {"PyLong_FromLong", (PYTHON_PROC*)&dll_PyLong_FromLong},
+      {"PyInt_Type", (PYTHON_PROC*)&dll_PyInt_Type},
++     {"PyLong_Type", (PYTHON_PROC*)&dll_PyLong_Type},
+      {"PyList_GetItem", (PYTHON_PROC*)&dll_PyList_GetItem},
+      {"PyList_Append", (PYTHON_PROC*)&dll_PyList_Append},
+      {"PyList_New", (PYTHON_PROC*)&dll_PyList_New},
+      {"PyList_SetItem", (PYTHON_PROC*)&dll_PyList_SetItem},
+      {"PyList_Size", (PYTHON_PROC*)&dll_PyList_Size},
+      {"PyList_Type", (PYTHON_PROC*)&dll_PyList_Type},
++     {"PySequence_GetItem", (PYTHON_PROC*)&dll_PySequence_GetItem},
++     {"PySequence_Size", (PYTHON_PROC*)&dll_PySequence_Size},
++     {"PySequence_Check", (PYTHON_PROC*)&dll_PySequence_Check},
++     {"PyTuple_GetItem", (PYTHON_PROC*)&dll_PyTuple_GetItem},
++     {"PyTuple_Size", (PYTHON_PROC*)&dll_PyTuple_Size},
++     {"PyTuple_Type", (PYTHON_PROC*)&dll_PyTuple_Type},
+      {"PyImport_ImportModule", (PYTHON_PROC*)&dll_PyImport_ImportModule},
+      {"PyDict_GetItemString", (PYTHON_PROC*)&dll_PyDict_GetItemString},
++     {"PyDict_Next", (PYTHON_PROC*)&dll_PyDict_Next},
+      {"PyDict_New", (PYTHON_PROC*)&dll_PyDict_New},
++ # ifndef PY_NO_MAPPING_ITEMS
++     {"PyMapping_Items", (PYTHON_PROC*)&dll_PyMapping_Items},
++ # endif
++     {"PyObject_CallMethod", (PYTHON_PROC*)&dll_PyObject_CallMethod},
++     {"PyMapping_Check", (PYTHON_PROC*)&dll_PyMapping_Check},
++     {"PyIter_Next", (PYTHON_PROC*)&dll_PyIter_Next},
+      {"PyModule_GetDict", (PYTHON_PROC*)&dll_PyModule_GetDict},
+      {"PyRun_SimpleString", (PYTHON_PROC*)&dll_PyRun_SimpleString},
++     {"PyRun_String", (PYTHON_PROC*)&dll_PyRun_String},
+      {"PyString_AsString", (PYTHON_PROC*)&dll_PyString_AsString},
+      {"PyString_FromString", (PYTHON_PROC*)&dll_PyString_FromString},
+      {"PyString_FromStringAndSize", (PYTHON_PROC*)&dll_PyString_FromStringAndSize},
+      {"PyString_Size", (PYTHON_PROC*)&dll_PyString_Size},
+      {"PyString_Type", (PYTHON_PROC*)&dll_PyString_Type},
++     {"PyUnicode_Type", (PYTHON_PROC*)&dll_PyUnicode_Type},
++     {"PyUnicodeUCS4_AsEncodedString", (PYTHON_PROC*)&dll_PyUnicodeUCS4_AsEncodedString},
++     {"PyFloat_Type", (PYTHON_PROC*)&dll_PyFloat_Type},
++     {"PyFloat_AsDouble", (PYTHON_PROC*)&dll_PyFloat_AsDouble},
++     {"PyFloat_FromDouble", (PYTHON_PROC*)&dll_PyFloat_FromDouble},
++     {"PyImport_AddModule", (PYTHON_PROC*)&dll_PyImport_AddModule},
+      {"PySys_SetObject", (PYTHON_PROC*)&dll_PySys_SetObject},
+      {"PySys_SetArgv", (PYTHON_PROC*)&dll_PySys_SetArgv},
+      {"PyType_Type", (PYTHON_PROC*)&dll_PyType_Type},
+***************
+*** 328,333 ****
+--- 414,421 ----
+      {"Py_IsInitialized", (PYTHON_PROC*)&dll_Py_IsInitialized},
+      {"_PyObject_New", (PYTHON_PROC*)&dll__PyObject_New},
+      {"PyObject_Init", (PYTHON_PROC*)&dll__PyObject_Init},
++     {"PyObject_GetIter", (PYTHON_PROC*)&dll_PyObject_GetIter},
++     {"_PyObject_NextNotImplemented", (PYTHON_PROC*)&dll__PyObject_NextNotImplemented},
+      {"_Py_NoneStruct", (PYTHON_PROC*)&dll__Py_NoneStruct},
+  # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02020000
+      {"PyType_IsSubtype", (PYTHON_PROC*)&dll_PyType_IsSubtype},
+***************
+*** 336,341 ****
+--- 424,431 ----
+      {"PyObject_Malloc", (PYTHON_PROC*)&dll_PyObject_Malloc},
+      {"PyObject_Free", (PYTHON_PROC*)&dll_PyObject_Free},
+  # endif
++     {"PyCapsule_New", (PYTHON_PROC*)&dll_PyCapsule_New},
++     {"PyCapsule_GetPointer", (PYTHON_PROC*)&dll_PyCapsule_GetPointer},
+      {"", NULL},
+  };
+  
+***************
+*** 434,443 ****
+--- 524,548 ----
+  
+  static PyObject *BufferNew (buf_T *);
+  static PyObject *WindowNew(win_T *);
++ static PyObject *DictionaryNew(dict_T *);
+  static PyObject *LineToString(const char *);
+  
+  static PyTypeObject RangeType;
+  
++ static int initialised = 0;
++ #define PYINITIALISED initialised
++ 
++ /* Add conversion from PyInt? */
++ #define DICTKEY_GET(err) \
++     if (!PyString_Check(keyObject)) \
++     { \
++ 	PyErr_SetString(PyExc_TypeError, _("only string keys are allowed")); \
++ 	return err; \
++     } \
++     key = (char_u *) PyString_AsString(keyObject);
++ #define DICTKEY_UNREF
++ #define DICTKEY_DECL
++ 
+  /*
+   * Include the code shared with if_python3.c
+   */
+***************
+*** 451,456 ****
+--- 556,563 ----
+  static PyInt RangeStart;
+  static PyInt RangeEnd;
+  
++ static PyObject *globals;
++ 
+  static void PythonIO_Flush(void);
+  static int PythonIO_Init(void);
+  static int PythonMod_Init(void);
+***************
+*** 466,473 ****
+   * 1. Python interpreter main program.
+   */
+  
+- static int initialised = 0;
+- 
+  #if PYTHON_API_VERSION < 1007 /* Python 1.4 */
+  typedef PyObject PyThreadState;
+  #endif
+--- 573,578 ----
+***************
+*** 581,586 ****
+--- 686,693 ----
+  	if (PythonMod_Init())
+  	    goto fail;
+  
++ 	globals = PyModule_GetDict(PyImport_AddModule("__main__"));
++ 
+  	/* Remove the element from sys.path that was added because of our
+  	 * argv[0] value in PythonMod_Init().  Previously we used an empty
+  	 * string, but dependinding on the OS we then get an empty entry or
+***************
+*** 609,615 ****
+   * External interface
+   */
+      static void
+! DoPythonCommand(exarg_T *eap, const char *cmd)
+  {
+  #ifndef PY_CAN_RECURSE
+      static int		recursive = 0;
+--- 716,722 ----
+   * External interface
+   */
+      static void
+! DoPythonCommand(exarg_T *eap, const char *cmd, typval_T *rettv)
+  {
+  #ifndef PY_CAN_RECURSE
+      static int		recursive = 0;
+***************
+*** 639,646 ****
+      if (Python_Init())
+  	goto theend;
+  
+!     RangeStart = eap->line1;
+!     RangeEnd = eap->line2;
+      Python_Release_Vim();	    /* leave vim */
+  
+  #if defined(HAVE_LOCALE_H) || defined(X_LOCALE)
+--- 746,761 ----
+      if (Python_Init())
+  	goto theend;
+  
+!     if (rettv == NULL)
+!     {
+! 	RangeStart = eap->line1;
+! 	RangeEnd = eap->line2;
+!     }
+!     else
+!     {
+! 	RangeStart = (PyInt) curwin->w_cursor.lnum;
+! 	RangeEnd = RangeStart;
+!     }
+      Python_Release_Vim();	    /* leave vim */
+  
+  #if defined(HAVE_LOCALE_H) || defined(X_LOCALE)
+***************
+*** 658,664 ****
+  
+      Python_RestoreThread();	    /* enter python */
+  
+!     PyRun_SimpleString((char *)(cmd));
+  
+      Python_SaveThread();	    /* leave python */
+  
+--- 773,795 ----
+  
+      Python_RestoreThread();	    /* enter python */
+  
+!     if (rettv == NULL)
+! 	PyRun_SimpleString((char *)(cmd));
+!     else
+!     {
+! 	PyObject	*r;
+! 
+! 	r = PyRun_String((char *)(cmd), Py_eval_input, globals, globals);
+! 	if (r == NULL)
+! 	    EMSG(_("E858: Eval did not return a valid python object"));
+! 	else
+! 	{
+! 	    if (ConvertFromPyObject(r, rettv) == -1)
+! 		EMSG(_("E859: Failed to convert returned python object to vim value"));
+! 	    Py_DECREF(r);
+! 	}
+! 	PyErr_Clear();
+!     }
+  
+      Python_SaveThread();	    /* leave python */
+  
+***************
+*** 680,686 ****
+  #ifndef PY_CAN_RECURSE
+      --recursive;
+  #endif
+!     return;	    /* keeps lint happy */
+  }
+  
+  /*
+--- 811,817 ----
+  #ifndef PY_CAN_RECURSE
+      --recursive;
+  #endif
+!     return;
+  }
+  
+  /*
+***************
+*** 695,703 ****
+      if (!eap->skip)
+      {
+  	if (script == NULL)
+! 	    DoPythonCommand(eap, (char *)eap->arg);
+  	else
+! 	    DoPythonCommand(eap, (char *)script);
+      }
+      vim_free(script);
+  }
+--- 826,834 ----
+      if (!eap->skip)
+      {
+  	if (script == NULL)
+! 	    DoPythonCommand(eap, (char *)eap->arg, NULL);
+  	else
+! 	    DoPythonCommand(eap, (char *)script, NULL);
+      }
+      vim_free(script);
+  }
+***************
+*** 743,749 ****
+      *p++ = '\0';
+  
+      /* Execute the file */
+!     DoPythonCommand(eap, buffer);
+  }
+  
+  /******************************************************
+--- 874,880 ----
+      *p++ = '\0';
+  
+      /* Execute the file */
+!     DoPythonCommand(eap, buffer, NULL);
+  }
+  
+  /******************************************************
+***************
+*** 765,778 ****
+      static int
+  OutputSetattr(PyObject *self, char *name, PyObject *val)
+  {
+!     if (val == NULL) {
+  	PyErr_SetString(PyExc_AttributeError, _("can't delete OutputObject attributes"));
+  	return -1;
+      }
+  
+      if (strcmp(name, "softspace") == 0)
+      {
+! 	if (!PyInt_Check(val)) {
+  	    PyErr_SetString(PyExc_TypeError, _("softspace must be an integer"));
+  	    return -1;
+  	}
+--- 896,911 ----
+      static int
+  OutputSetattr(PyObject *self, char *name, PyObject *val)
+  {
+!     if (val == NULL)
+!     {
+  	PyErr_SetString(PyExc_AttributeError, _("can't delete OutputObject attributes"));
+  	return -1;
+      }
+  
+      if (strcmp(name, "softspace") == 0)
+      {
+! 	if (!PyInt_Check(val))
+! 	{
+  	    PyErr_SetString(PyExc_TypeError, _("softspace must be an integer"));
+  	    return -1;
+  	}
+***************
+*** 800,805 ****
+--- 933,941 ----
+   * 3. Implementation of the Vim module for Python
+   */
+  
++ static PyObject *ConvertToPyObject(typval_T *);
++ static int ConvertFromPyObject(PyObject *, typval_T *);
++ 
+  /* Window type - Implementation functions
+   * --------------------------------------
+   */
+***************
+*** 1441,1446 ****
+--- 1577,1748 ----
+      return result;
+  }
+  
++ static void DictionaryDestructor(PyObject *);
++ static PyObject *DictionaryGetattr(PyObject *, char*);
++ 
++ static PyMappingMethods DictionaryAsMapping = {
++     (PyInquiry)		DictionaryLength,
++     (binaryfunc)	DictionaryItem,
++     (objobjargproc)	DictionaryAssItem,
++ };
++ 
++ static PyTypeObject DictionaryType = {
++     PyObject_HEAD_INIT(0)
++     0,
++     "vimdictionary",
++     sizeof(DictionaryObject),
++     0,
++ 
++     (destructor)  DictionaryDestructor,
++     (printfunc)   0,
++     (getattrfunc) DictionaryGetattr,
++     (setattrfunc) 0,
++     (cmpfunc)     0,
++     (reprfunc)    0,
++ 
++     0,			    /* as number */
++     0,			    /* as sequence */
++     &DictionaryAsMapping,   /* as mapping */
++ 
++     (hashfunc)    0,
++     (ternaryfunc) 0,
++     (reprfunc)    0,
++ };
++ 
++     static void
++ DictionaryDestructor(PyObject *self)
++ {
++     DictionaryObject	*this = ((DictionaryObject *) (self));
++ 
++     pyll_remove(&this->ref, &lastdict);
++     dict_unref(this->dict);
++ 
++     Py_DECREF(self);
++ }
++ 
++     static PyObject *
++ DictionaryGetattr(PyObject *self, char *name)
++ {
++     return Py_FindMethod(DictionaryMethods, self, name);
++ }
++ 
++ static void ListDestructor(PyObject *);
++ static PyObject *ListGetattr(PyObject *, char *);
++ 
++ static PySequenceMethods ListAsSeq = {
++     (PyInquiry)			ListLength,
++     (binaryfunc)		0,
++     (PyIntArgFunc)		0,
++     (PyIntArgFunc)		ListItem,
++     (PyIntIntArgFunc)		ListSlice,
++     (PyIntObjArgProc)		ListAssItem,
++     (PyIntIntObjArgProc)	ListAssSlice,
++     (objobjproc)		0,
++ #if PY_MAJOR_VERSION >= 2
++     (binaryfunc)		ListConcatInPlace,
++     0,
++ #endif
++ };
++ 
++ static PyTypeObject ListType = {
++     PyObject_HEAD_INIT(0)
++     0,
++     "vimlist",
++     sizeof(ListObject),
++     0,
++ 
++     (destructor)  ListDestructor,
++     (printfunc)   0,
++     (getattrfunc) ListGetattr,
++     (setattrfunc) 0,
++     (cmpfunc)     0,
++     (reprfunc)    0,
++ 
++     0,			    /* as number */
++     &ListAsSeq,		    /* as sequence */
++     0,			    /* as mapping */
++ 
++     (hashfunc)    0,
++     (ternaryfunc) 0,
++     (reprfunc)    0,
++ };
++ 
++     static void
++ ListDestructor(PyObject *self)
++ {
++     ListObject	*this = ((ListObject *) (self));
++ 
++     pyll_remove(&this->ref, &lastlist);
++     list_unref(this->list);
++ 
++     Py_DECREF(self);
++ }
++ 
++     static PyObject *
++ ListGetattr(PyObject *self, char *name)
++ {
++     return Py_FindMethod(ListMethods, self, name);
++ }
++ 
++ static void FunctionDestructor(PyObject *);
++ static PyObject *FunctionGetattr(PyObject *, char *);
++ 
++ static PyTypeObject FunctionType = {
++     PyObject_HEAD_INIT(0)
++     0,
++     "vimfunction",
++     sizeof(FunctionObject),
++     0,
++ 
++     (destructor)  FunctionDestructor,
++     (printfunc)   0,
++     (getattrfunc) FunctionGetattr,
++     (setattrfunc) 0,
++     (cmpfunc)     0,
++     (reprfunc)    0,
++ 
++     0,			    /* as number */
++     0,			    /* as sequence */
++     0,			    /* as mapping */
++ 
++     (hashfunc)    0,
++     (ternaryfunc) FunctionCall,
++     (reprfunc)    0,
++ };
++ 
++     static void
++ FunctionDestructor(PyObject *self)
++ {
++     FunctionObject	*this = (FunctionObject *) (self);
++ 
++     func_unref(this->name);
++     PyMem_Del(this->name);
++ 
++     Py_DECREF(self);
++ }
++ 
++     static PyObject *
++ FunctionGetattr(PyObject *self, char *name)
++ {
++     FunctionObject	*this = (FunctionObject *)(self);
++ 
++     if (strcmp(name, "name") == 0)
++ 	return PyString_FromString((char *)(this->name));
++     else
++ 	return Py_FindMethod(FunctionMethods, self, name);
++ }
++ 
++     void
++ do_pyeval (char_u *str, typval_T *rettv)
++ {
++     DoPythonCommand(NULL, (char *) str, rettv);
++     switch(rettv->v_type)
++     {
++ 	case VAR_DICT: ++rettv->vval.v_dict->dv_refcount; break;
++ 	case VAR_LIST: ++rettv->vval.v_list->lv_refcount; break;
++ 	case VAR_FUNC: func_ref(rettv->vval.v_string);    break;
++     }
++ }
+  
+  /* Don't generate a prototype for the next function, it generates an error on
+   * newer Python versions. */
+***************
+*** 1453,1458 ****
+--- 1755,1766 ----
+  }
+  #endif /* Python 1.4 */
+  
++     void
++ set_ref_in_python (int copyID)
++ {
++     set_ref_in_py(copyID);
++ }
++ 
+      static void
+  init_structs(void)
+  {
+*** ../vim-7.3.568/src/if_python3.c	2012-02-04 20:17:21.000000000 +0100
+--- src/if_python3.c	2012-06-29 11:54:10.000000000 +0200
+***************
+*** 77,83 ****
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, CODEC_ERROR_HANDLER);
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+--- 77,83 ----
+  
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+! #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, CODEC_ERROR_HANDLER)
+  #define PyString_FreeBytes(obj) Py_XDECREF(bytes)
+  #define PyString_AsString(obj) PyBytes_AsString(obj)
+  #define PyString_Size(obj) PyBytes_GET_SIZE(bytes)
+***************
+*** 109,114 ****
+--- 109,115 ----
+  # undef PyArg_ParseTuple
+  # define PyArg_ParseTuple py3_PyArg_ParseTuple
+  # define PyMem_Free py3_PyMem_Free
++ # define PyMem_Malloc py3_PyMem_Malloc
+  # define PyDict_SetItemString py3_PyDict_SetItemString
+  # define PyErr_BadArgument py3_PyErr_BadArgument
+  # define PyErr_Clear py3_PyErr_Clear
+***************
+*** 128,141 ****
+--- 129,155 ----
+  # define PyList_New py3_PyList_New
+  # define PyList_SetItem py3_PyList_SetItem
+  # define PyList_Size py3_PyList_Size
++ # define PySequence_Check py3_PySequence_Check
++ # define PySequence_Size py3_PySequence_Size
++ # define PySequence_GetItem py3_PySequence_GetItem
++ # define PyTuple_Size py3_PyTuple_Size
++ # define PyTuple_GetItem py3_PyTuple_GetItem
+  # define PySlice_GetIndicesEx py3_PySlice_GetIndicesEx
+  # define PyImport_ImportModule py3_PyImport_ImportModule
++ # define PyImport_AddModule py3_PyImport_AddModule
+  # define PyObject_Init py3__PyObject_Init
+  # define PyDict_New py3_PyDict_New
+  # define PyDict_GetItemString py3_PyDict_GetItemString
++ # define PyDict_Next py3_PyDict_Next
++ # define PyMapping_Check py3_PyMapping_Check
++ # define PyMapping_Items py3_PyMapping_Items
++ # define PyIter_Next py3_PyIter_Next
++ # define PyObject_GetIter py3_PyObject_GetIter
+  # define PyModule_GetDict py3_PyModule_GetDict
+  #undef PyRun_SimpleString
+  # define PyRun_SimpleString py3_PyRun_SimpleString
++ #undef PyRun_String
++ # define PyRun_String py3_PyRun_String
+  # define PySys_SetObject py3_PySys_SetObject
+  # define PySys_SetArgv py3_PySys_SetArgv
+  # define PyType_Type (*py3_PyType_Type)
+***************
+*** 147,152 ****
+--- 161,167 ----
+  # define Py_Finalize py3_Py_Finalize
+  # define Py_IsInitialized py3_Py_IsInitialized
+  # define _Py_NoneStruct (*py3__Py_NoneStruct)
++ # define _PyObject_NextNotImplemented (*py3__PyObject_NextNotImplemented)
+  # define PyModule_AddObject py3_PyModule_AddObject
+  # define PyImport_AppendInittab py3_PyImport_AppendInittab
+  # define _PyUnicode_AsString py3__PyUnicode_AsString
+***************
+*** 154,161 ****
+--- 169,181 ----
+  # define PyUnicode_AsEncodedString py3_PyUnicode_AsEncodedString
+  # undef PyBytes_AsString
+  # define PyBytes_AsString py3_PyBytes_AsString
++ # undef PyBytes_FromString
++ # define PyBytes_FromString py3_PyBytes_FromString
++ # define PyFloat_FromDouble py3_PyFloat_FromDouble
++ # define PyFloat_AsDouble py3_PyFloat_AsDouble
+  # define PyObject_GenericGetAttr py3_PyObject_GenericGetAttr
+  # define PySlice_Type (*py3_PySlice_Type)
++ # define PyFloat_Type (*py3_PyFloat_Type)
+  # define PyErr_NewException py3_PyErr_NewException
+  # ifdef Py_DEBUG
+  #  define _Py_NegativeRefcount py3__Py_NegativeRefcount
+***************
+*** 174,179 ****
+--- 194,202 ----
+  # define PyUnicode_FromString py3_PyUnicode_FromString
+  # undef PyUnicode_Decode
+  # define PyUnicode_Decode py3_PyUnicode_Decode
++ # define PyType_IsSubtype py3_PyType_IsSubtype
++ # define PyCapsule_New py3_PyCapsule_New
++ # define PyCapsule_GetPointer py3_PyCapsule_GetPointer
+  
+  # ifdef Py_DEBUG
+  #  undef PyObject_NEW
+***************
+*** 194,215 ****
+--- 217,250 ----
+  static int (*py3_PySys_SetObject)(char *, PyObject *);
+  static PyObject* (*py3_PyList_Append)(PyObject *, PyObject *);
+  static Py_ssize_t (*py3_PyList_Size)(PyObject *);
++ static int (*py3_PySequence_Check)(PyObject *);
++ static Py_ssize_t (*py3_PySequence_Size)(PyObject *);
++ static PyObject* (*py3_PySequence_GetItem)(PyObject *, Py_ssize_t);
++ static Py_ssize_t (*py3_PyTuple_Size)(PyObject *);
++ static PyObject* (*py3_PyTuple_GetItem)(PyObject *, Py_ssize_t);
++ static int (*py3_PyMapping_Check)(PyObject *);
++ static PyObject* (*py3_PyMapping_Items)(PyObject *);
+  static int (*py3_PySlice_GetIndicesEx)(PyObject *r, Py_ssize_t length,
+  		     Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength);
+  static PyObject* (*py3_PyErr_NoMemory)(void);
+  static void (*py3_Py_Finalize)(void);
+  static void (*py3_PyErr_SetString)(PyObject *, const char *);
+  static int (*py3_PyRun_SimpleString)(char *);
++ static PyObject* (*py3_PyRun_String)(char *, int, PyObject *, PyObject *);
+  static PyObject* (*py3_PyList_GetItem)(PyObject *, Py_ssize_t);
+  static PyObject* (*py3_PyImport_ImportModule)(const char *);
++ static PyObject* (*py3_PyImport_AddModule)(const char *);
+  static int (*py3_PyErr_BadArgument)(void);
+  static PyTypeObject* py3_PyType_Type;
+  static PyObject* (*py3_PyErr_Occurred)(void);
+  static PyObject* (*py3_PyModule_GetDict)(PyObject *);
+  static int (*py3_PyList_SetItem)(PyObject *, Py_ssize_t, PyObject *);
+  static PyObject* (*py3_PyDict_GetItemString)(PyObject *, const char *);
++ static int (*py3_PyDict_Next)(PyObject *, Py_ssize_t *, PyObject **, PyObject **);
+  static PyObject* (*py3_PyLong_FromLong)(long);
+  static PyObject* (*py3_PyDict_New)(void);
++ static PyObject* (*py3_PyIter_Next)(PyObject *);
++ static PyObject* (*py3_PyObject_GetIter)(PyObject *);
+  static PyObject* (*py3_Py_BuildValue)(char *, ...);
+  static int (*py3_PyType_Ready)(PyTypeObject *type);
+  static int (*py3_PyDict_SetItemString)(PyObject *dp, char *key, PyObject *item);
+***************
+*** 224,244 ****
+--- 259,287 ----
+  static int (*py3_PyArg_Parse)(PyObject *, char *, ...);
+  static int (*py3_PyArg_ParseTuple)(PyObject *, char *, ...);
+  static int (*py3_PyMem_Free)(void *);
++ static void* (*py3_PyMem_Malloc)(size_t);
+  static int (*py3_Py_IsInitialized)(void);
+  static void (*py3_PyErr_Clear)(void);
+  static PyObject*(*py3__PyObject_Init)(PyObject *, PyTypeObject *);
++ static iternextfunc py3__PyObject_NextNotImplemented;
+  static PyObject* py3__Py_NoneStruct;
+  static int (*py3_PyModule_AddObject)(PyObject *m, const char *name, PyObject *o);
+  static int (*py3_PyImport_AppendInittab)(const char *name, PyObject* (*initfunc)(void));
+  static char* (*py3__PyUnicode_AsString)(PyObject *unicode);
+  static PyObject* (*py3_PyUnicode_AsEncodedString)(PyObject *unicode, const char* encoding, const char* errors);
+  static char* (*py3_PyBytes_AsString)(PyObject *bytes);
++ static PyObject* (*py3_PyBytes_FromString)(char *str);
++ static PyObject* (*py3_PyFloat_FromDouble)(double num);
++ static double (*py3_PyFloat_AsDouble)(PyObject *);
+  static PyObject* (*py3_PyObject_GenericGetAttr)(PyObject *obj, PyObject *name);
+  static PyObject* (*py3_PyModule_Create2)(struct PyModuleDef* module, int module_api_version);
+  static PyObject* (*py3_PyType_GenericAlloc)(PyTypeObject *type, Py_ssize_t nitems);
+  static PyObject* (*py3_PyType_GenericNew)(PyTypeObject *type, PyObject *args, PyObject *kwds);
+  static PyTypeObject* py3_PySlice_Type;
++ static PyTypeObject* py3_PyFloat_Type;
+  static PyObject* (*py3_PyErr_NewException)(char *name, PyObject *base, PyObject *dict);
++ static PyObject* (*py3_PyCapsule_New)(void *, char *, PyCapsule_Destructor);
++ static void* (*py3_PyCapsule_GetPointer)(PyObject *, char *);
+  # ifdef Py_DEBUG
+      static void (*py3__Py_NegativeRefcount)(const char *fname, int lineno, PyObject *op);
+      static Py_ssize_t* py3__Py_RefTotal;
+***************
+*** 249,254 ****
+--- 292,298 ----
+      static void (*py3_PyObject_Free)(void*);
+      static void* (*py3_PyObject_Malloc)(size_t);
+  # endif
++ static int (*py3_PyType_IsSubtype)(PyTypeObject *, PyTypeObject *);
+  
+  static HINSTANCE hinstPy3 = 0; /* Instance of python.dll */
+  
+***************
+*** 280,304 ****
+--- 324,361 ----
+      {"Py_Initialize", (PYTHON_PROC*)&py3_Py_Initialize},
+      {"PyArg_ParseTuple", (PYTHON_PROC*)&py3_PyArg_ParseTuple},
+      {"PyMem_Free", (PYTHON_PROC*)&py3_PyMem_Free},
++     {"PyMem_Malloc", (PYTHON_PROC*)&py3_PyMem_Malloc},
+      {"PyList_New", (PYTHON_PROC*)&py3_PyList_New},
+      {"PyGILState_Ensure", (PYTHON_PROC*)&py3_PyGILState_Ensure},
+      {"PyGILState_Release", (PYTHON_PROC*)&py3_PyGILState_Release},
+      {"PySys_SetObject", (PYTHON_PROC*)&py3_PySys_SetObject},
+      {"PyList_Append", (PYTHON_PROC*)&py3_PyList_Append},
+      {"PyList_Size", (PYTHON_PROC*)&py3_PyList_Size},
++     {"PySequence_Check", (PYTHON_PROC*)&py3_PySequence_Check},
++     {"PySequence_Size", (PYTHON_PROC*)&py3_PySequence_Size},
++     {"PySequence_GetItem", (PYTHON_PROC*)&py3_PySequence_GetItem},
++     {"PyTuple_Size", (PYTHON_PROC*)&py3_PyTuple_Size},
++     {"PyTuple_GetItem", (PYTHON_PROC*)&py3_PyTuple_GetItem},
+      {"PySlice_GetIndicesEx", (PYTHON_PROC*)&py3_PySlice_GetIndicesEx},
+      {"PyErr_NoMemory", (PYTHON_PROC*)&py3_PyErr_NoMemory},
+      {"Py_Finalize", (PYTHON_PROC*)&py3_Py_Finalize},
+      {"PyErr_SetString", (PYTHON_PROC*)&py3_PyErr_SetString},
+      {"PyRun_SimpleString", (PYTHON_PROC*)&py3_PyRun_SimpleString},
++     {"PyRun_String", (PYTHON_PROC*)&py3_PyRun_String},
+      {"PyList_GetItem", (PYTHON_PROC*)&py3_PyList_GetItem},
+      {"PyImport_ImportModule", (PYTHON_PROC*)&py3_PyImport_ImportModule},
++     {"PyImport_AddModule", (PYTHON_PROC*)&py3_PyImport_AddModule},
+      {"PyErr_BadArgument", (PYTHON_PROC*)&py3_PyErr_BadArgument},
+      {"PyType_Type", (PYTHON_PROC*)&py3_PyType_Type},
+      {"PyErr_Occurred", (PYTHON_PROC*)&py3_PyErr_Occurred},
+      {"PyModule_GetDict", (PYTHON_PROC*)&py3_PyModule_GetDict},
+      {"PyList_SetItem", (PYTHON_PROC*)&py3_PyList_SetItem},
+      {"PyDict_GetItemString", (PYTHON_PROC*)&py3_PyDict_GetItemString},
++     {"PyDict_Next", (PYTHON_PROC*)&py3_PyDict_Next},
++     {"PyMapping_Check", (PYTHON_PROC*)&py3_PyMapping_Check},
++     {"PyMapping_Items", (PYTHON_PROC*)&py3_PyMapping_Items},
++     {"PyIter_Next", (PYTHON_PROC*)&py3_PyIter_Next},
++     {"PyObject_GetIter", (PYTHON_PROC*)&py3_PyObject_GetIter},
+      {"PyLong_FromLong", (PYTHON_PROC*)&py3_PyLong_FromLong},
+      {"PyDict_New", (PYTHON_PROC*)&py3_PyDict_New},
+      {"Py_BuildValue", (PYTHON_PROC*)&py3_Py_BuildValue},
+***************
+*** 311,316 ****
+--- 368,374 ----
+      {"PyEval_SaveThread", (PYTHON_PROC*)&py3_PyEval_SaveThread},
+      {"PyArg_Parse", (PYTHON_PROC*)&py3_PyArg_Parse},
+      {"Py_IsInitialized", (PYTHON_PROC*)&py3_Py_IsInitialized},
++     {"_PyObject_NextNotImplemented", (PYTHON_PROC*)&py3__PyObject_NextNotImplemented},
+      {"_Py_NoneStruct", (PYTHON_PROC*)&py3__Py_NoneStruct},
+      {"PyErr_Clear", (PYTHON_PROC*)&py3_PyErr_Clear},
+      {"PyObject_Init", (PYTHON_PROC*)&py3__PyObject_Init},
+***************
+*** 318,328 ****
+--- 376,390 ----
+      {"PyImport_AppendInittab", (PYTHON_PROC*)&py3_PyImport_AppendInittab},
+      {"_PyUnicode_AsString", (PYTHON_PROC*)&py3__PyUnicode_AsString},
+      {"PyBytes_AsString", (PYTHON_PROC*)&py3_PyBytes_AsString},
++     {"PyBytes_FromString", (PYTHON_PROC*)&py3_PyBytes_FromString},
++     {"PyFloat_FromDouble", (PYTHON_PROC*)&py3_PyFloat_FromDouble},
++     {"PyFloat_AsDouble", (PYTHON_PROC*)&py3_PyFloat_AsDouble},
+      {"PyObject_GenericGetAttr", (PYTHON_PROC*)&py3_PyObject_GenericGetAttr},
+      {"PyModule_Create2", (PYTHON_PROC*)&py3_PyModule_Create2},
+      {"PyType_GenericAlloc", (PYTHON_PROC*)&py3_PyType_GenericAlloc},
+      {"PyType_GenericNew", (PYTHON_PROC*)&py3_PyType_GenericNew},
+      {"PySlice_Type", (PYTHON_PROC*)&py3_PySlice_Type},
++     {"PyFloat_Type", (PYTHON_PROC*)&py3_PyFloat_Type},
+      {"PyErr_NewException", (PYTHON_PROC*)&py3_PyErr_NewException},
+  # ifdef Py_DEBUG
+      {"_Py_NegativeRefcount", (PYTHON_PROC*)&py3__Py_NegativeRefcount},
+***************
+*** 334,339 ****
+--- 396,404 ----
+      {"PyObject_Malloc", (PYTHON_PROC*)&py3_PyObject_Malloc},
+      {"PyObject_Free", (PYTHON_PROC*)&py3_PyObject_Free},
+  # endif
++     {"PyType_IsSubtype", (PYTHON_PROC*)&py3_PyType_IsSubtype},
++     {"PyCapsule_New", (PYTHON_PROC*)&py3_PyCapsule_New},
++     {"PyCapsule_GetPointer", (PYTHON_PROC*)&py3_PyCapsule_GetPointer},
+      {"", NULL},
+  };
+  
+***************
+*** 472,482 ****
+--- 537,577 ----
+  
+  static PyTypeObject RangeType;
+  
++ static int py3initialised = 0;
++ 
++ #define PYINITIALISED py3initialised
++ 
++ /* Add conversion from PyInt? */
++ #define DICTKEY_GET(err) \
++     if (PyBytes_Check(keyObject)) \
++ 	key = (char_u *) PyBytes_AsString(keyObject); \
++     else if (PyUnicode_Check(keyObject)) \
++     { \
++ 	bytes = PyString_AsBytes(keyObject); \
++ 	if (bytes == NULL) \
++ 	    return err; \
++ 	key = (char_u *) PyBytes_AsString(bytes); \
++ 	if (key == NULL) \
++ 	    return err; \
++     } \
++     else \
++     { \
++ 	PyErr_SetString(PyExc_TypeError, _("only string keys are allowed")); \
++ 	return err; \
++     }
++ #define DICTKEY_UNREF \
++     if (bytes != NULL) \
++ 	Py_XDECREF(bytes);
++ 
++ #define DICTKEY_DECL PyObject *bytes = NULL;
++ 
+  /*
+   * Include the code shared with if_python.c
+   */
+  #include "if_py_both.h"
+  
++ #define PY3OBJ_DELETED(obj) (obj->ob_base.ob_refcnt<=0)
++ 
+      static void
+  call_PyObject_Free(void *p)
+  {
+***************
+*** 506,511 ****
+--- 601,608 ----
+  static Py_ssize_t RangeStart;
+  static Py_ssize_t RangeEnd;
+  
++ static PyObject *globals;
++ 
+  static int PythonIO_Init(void);
+  static void PythonIO_Fini(void);
+  PyMODINIT_FUNC Py3Init_vim(void);
+***************
+*** 514,521 ****
+   * 1. Python interpreter main program.
+   */
+  
+- static int py3initialised = 0;
+- 
+  static PyGILState_STATE pygilstate = PyGILState_UNLOCKED;
+  
+      void
+--- 611,616 ----
+***************
+*** 593,598 ****
+--- 688,695 ----
+  
+  	PyImport_AppendInittab("vim", Py3Init_vim);
+  
++ 	globals = PyModule_GetDict(PyImport_AddModule("__main__"));
++ 
+  	/* Remove the element from sys.path that was added because of our
+  	 * argv[0] value in Py3Init_vim().  Previously we used an empty
+  	 * string, but dependinding on the OS we then get an empty entry or
+***************
+*** 629,635 ****
+   * External interface
+   */
+      static void
+! DoPy3Command(exarg_T *eap, const char *cmd)
+  {
+  #if defined(MACOS) && !defined(MACOS_X_UNIX)
+      GrafPtr		oldPort;
+--- 726,732 ----
+   * External interface
+   */
+      static void
+! DoPy3Command(exarg_T *eap, const char *cmd, typval_T *rettv)
+  {
+  #if defined(MACOS) && !defined(MACOS_X_UNIX)
+      GrafPtr		oldPort;
+***************
+*** 649,656 ****
+      if (Python3_Init())
+  	goto theend;
+  
+!     RangeStart = eap->line1;
+!     RangeEnd = eap->line2;
+      Python_Release_Vim();	    /* leave vim */
+  
+  #if defined(HAVE_LOCALE_H) || defined(X_LOCALE)
+--- 746,761 ----
+      if (Python3_Init())
+  	goto theend;
+  
+!     if (rettv == NULL)
+!     {
+! 	RangeStart = eap->line1;
+! 	RangeEnd = eap->line2;
+!     }
+!     else
+!     {
+! 	RangeStart = (PyInt) curwin->w_cursor.lnum;
+! 	RangeEnd = RangeStart;
+!     }
+      Python_Release_Vim();	    /* leave vim */
+  
+  #if defined(HAVE_LOCALE_H) || defined(X_LOCALE)
+***************
+*** 674,680 ****
+  					(char *)ENC_OPT, CODEC_ERROR_HANDLER);
+      cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", CODEC_ERROR_HANDLER);
+      Py_XDECREF(cmdstr);
+!     PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+      Py_XDECREF(cmdbytes);
+  
+      PyGILState_Release(pygilstate);
+--- 779,802 ----
+  					(char *)ENC_OPT, CODEC_ERROR_HANDLER);
+      cmdbytes = PyUnicode_AsEncodedString(cmdstr, "utf-8", CODEC_ERROR_HANDLER);
+      Py_XDECREF(cmdstr);
+!     if (rettv == NULL)
+! 	PyRun_SimpleString(PyBytes_AsString(cmdbytes));
+!     else
+!     {
+! 	PyObject	*r;
+! 
+! 	r = PyRun_String(PyBytes_AsString(cmdbytes), Py_eval_input,
+! 			 globals, globals);
+! 	if (r == NULL)
+! 	    EMSG(_("E860: Eval did not return a valid python 3 object"));
+! 	else
+! 	{
+! 	    if (ConvertFromPyObject(r, rettv) == -1)
+! 		EMSG(_("E861: Failed to convert returned python 3 object to vim value"));
+! 	    Py_DECREF(r);
+! 	}
+! 	PyErr_Clear();
+!     }
+      Py_XDECREF(cmdbytes);
+  
+      PyGILState_Release(pygilstate);
+***************
+*** 709,717 ****
+      if (!eap->skip)
+      {
+  	if (script == NULL)
+! 	    DoPy3Command(eap, (char *)eap->arg);
+  	else
+! 	    DoPy3Command(eap, (char *)script);
+      }
+      vim_free(script);
+  }
+--- 831,839 ----
+      if (!eap->skip)
+      {
+  	if (script == NULL)
+! 	    DoPy3Command(eap, (char *)eap->arg, NULL);
+  	else
+! 	    DoPy3Command(eap, (char *)script, NULL);
+      }
+      vim_free(script);
+  }
+***************
+*** 772,778 ****
+  
+  
+      /* Execute the file */
+!     DoPy3Command(eap, buffer);
+  }
+  
+  /******************************************************
+--- 894,900 ----
+  
+  
+      /* Execute the file */
+!     DoPy3Command(eap, buffer, NULL);
+  }
+  
+  /******************************************************
+***************
+*** 802,815 ****
+      if (PyUnicode_Check(nameobj))
+  	name = _PyUnicode_AsString(nameobj);
+  
+!     if (val == NULL) {
+  	PyErr_SetString(PyExc_AttributeError, _("can't delete OutputObject attributes"));
+  	return -1;
+      }
+  
+      if (strcmp(name, "softspace") == 0)
+      {
+! 	if (!PyLong_Check(val)) {
+  	    PyErr_SetString(PyExc_TypeError, _("softspace must be an integer"));
+  	    return -1;
+  	}
+--- 924,939 ----
+      if (PyUnicode_Check(nameobj))
+  	name = _PyUnicode_AsString(nameobj);
+  
+!     if (val == NULL)
+!     {
+  	PyErr_SetString(PyExc_AttributeError, _("can't delete OutputObject attributes"));
+  	return -1;
+      }
+  
+      if (strcmp(name, "softspace") == 0)
+      {
+! 	if (!PyLong_Check(val))
+! 	{
+  	    PyErr_SetString(PyExc_TypeError, _("softspace must be an integer"));
+  	    return -1;
+  	}
+***************
+*** 1030,1049 ****
+      static PyObject *
+  BufferSubscript(PyObject *self, PyObject* idx)
+  {
+!     if (PyLong_Check(idx)) {
+  	long _idx = PyLong_AsLong(idx);
+  	return BufferItem(self,_idx);
+!     } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+! 	      &step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+  	return BufferSlice(self, start, stop);
+!     } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+--- 1154,1178 ----
+      static PyObject *
+  BufferSubscript(PyObject *self, PyObject* idx)
+  {
+!     if (PyLong_Check(idx))
+!     {
+  	long _idx = PyLong_AsLong(idx);
+  	return BufferItem(self,_idx);
+!     } else if (PySlice_Check(idx))
+!     {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+! 	      &step, &slicelen) < 0)
+! 	{
+  	    return NULL;
+  	}
+  	return BufferSlice(self, start, stop);
+!     }
+!     else
+!     {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+***************
+*** 1052,1075 ****
+      static Py_ssize_t
+  BufferAsSubscript(PyObject *self, PyObject* idx, PyObject* val)
+  {
+!     if (PyLong_Check(idx)) {
+  	long n = PyLong_AsLong(idx);
+  	return RBAsItem((BufferObject *)(self), n, val, 1,
+  		    (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  		    NULL);
+!     } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+! 	      &step, &slicelen) < 0) {
+  	    return -1;
+  	}
+  	return RBAsSlice((BufferObject *)(self), start, stop, val, 1,
+  			  (PyInt)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  			  NULL);
+!     } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return -1;
+      }
+--- 1181,1209 ----
+      static Py_ssize_t
+  BufferAsSubscript(PyObject *self, PyObject* idx, PyObject* val)
+  {
+!     if (PyLong_Check(idx))
+!     {
+  	long n = PyLong_AsLong(idx);
+  	return RBAsItem((BufferObject *)(self), n, val, 1,
+  		    (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  		    NULL);
+!     } else if (PySlice_Check(idx))
+!     {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  	      (Py_ssize_t)((BufferObject *)(self))->buf->b_ml.ml_line_count+1,
+  	      &start, &stop,
+! 	      &step, &slicelen) < 0)
+! 	{
+  	    return -1;
+  	}
+  	return RBAsSlice((BufferObject *)(self), start, stop, val, 1,
+  			  (PyInt)((BufferObject *)(self))->buf->b_ml.ml_line_count,
+  			  NULL);
+!     }
+!     else
+!     {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return -1;
+      }
+***************
+*** 1142,1161 ****
+      static PyObject *
+  RangeSubscript(PyObject *self, PyObject* idx)
+  {
+!     if (PyLong_Check(idx)) {
+  	long _idx = PyLong_AsLong(idx);
+  	return RangeItem(self,_idx);
+!     } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+! 		&step, &slicelen) < 0) {
+  	    return NULL;
+  	}
+  	return RangeSlice(self, start, stop);
+!     } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+--- 1276,1300 ----
+      static PyObject *
+  RangeSubscript(PyObject *self, PyObject* idx)
+  {
+!     if (PyLong_Check(idx))
+!     {
+  	long _idx = PyLong_AsLong(idx);
+  	return RangeItem(self,_idx);
+!     } else if (PySlice_Check(idx))
+!     {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+! 		&step, &slicelen) < 0)
+! 	{
+  	    return NULL;
+  	}
+  	return RangeSlice(self, start, stop);
+!     }
+!     else
+!     {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return NULL;
+      }
+***************
+*** 1164,1183 ****
+      static Py_ssize_t
+  RangeAsSubscript(PyObject *self, PyObject *idx, PyObject *val)
+  {
+!     if (PyLong_Check(idx)) {
+  	long n = PyLong_AsLong(idx);
+  	return RangeAsItem(self, n, val);
+!     } else if (PySlice_Check(idx)) {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+! 		&step, &slicelen) < 0) {
+  	    return -1;
+  	}
+  	return RangeAsSlice(self, start, stop, val);
+!     } else {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return -1;
+      }
+--- 1303,1327 ----
+      static Py_ssize_t
+  RangeAsSubscript(PyObject *self, PyObject *idx, PyObject *val)
+  {
+!     if (PyLong_Check(idx))
+!     {
+  	long n = PyLong_AsLong(idx);
+  	return RangeAsItem(self, n, val);
+!     } else if (PySlice_Check(idx))
+!     {
+  	Py_ssize_t start, stop, step, slicelen;
+  
+  	if (PySlice_GetIndicesEx((PyObject *)idx,
+  		((RangeObject *)(self))->end-((RangeObject *)(self))->start+1,
+  		&start, &stop,
+! 		&step, &slicelen) < 0)
+! 	{
+  	    return -1;
+  	}
+  	return RangeAsSlice(self, start, stop, val);
+!     }
+!     else
+!     {
+  	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
+  	return -1;
+      }
+***************
+*** 1390,1395 ****
+--- 1534,1680 ----
+      }
+  }
+  
++ /* Dictionary object - Definitions
++  */
++ 
++ static PyInt DictionaryLength(PyObject *);
++ 
++ static PyMappingMethods DictionaryAsMapping = {
++     /* mp_length	*/ (lenfunc) DictionaryLength,
++     /* mp_subscript     */ (binaryfunc) DictionaryItem,
++     /* mp_ass_subscript */ (objobjargproc) DictionaryAssItem,
++ };
++ 
++ static PyTypeObject DictionaryType;
++ 
++     static void
++ DictionaryDestructor(PyObject *self)
++ {
++     DictionaryObject *this = (DictionaryObject *)(self);
++ 
++     pyll_remove(&this->ref, &lastdict);
++     dict_unref(this->dict);
++ 
++     Py_TYPE(self)->tp_free((PyObject*)self);
++ }
++ 
++ /* List object - Definitions
++  */
++ 
++ static PyInt ListLength(PyObject *);
++ static PyObject *ListItem(PyObject *, Py_ssize_t);
++ 
++ static PySequenceMethods ListAsSeq = {
++     (lenfunc)		ListLength,	 /* sq_length,	  len(x)   */
++     (binaryfunc)	0,		 /* RangeConcat, sq_concat,  x+y   */
++     (ssizeargfunc)	0,		 /* RangeRepeat, sq_repeat,  x*n   */
++     (ssizeargfunc)	ListItem,	 /* sq_item,	  x[i]	   */
++     (void *)		0,		 /* was_sq_slice,     x[i:j]   */
++     (ssizeobjargproc)	ListAssItem,	 /* sq_as_item,  x[i]=v   */
++     (void *)		0,		 /* was_sq_ass_slice, x[i:j]=v */
++     0,					 /* sq_contains */
++     (binaryfunc)	ListConcatInPlace,/* sq_inplace_concat */
++     0,					 /* sq_inplace_repeat */
++ };
++ 
++ static PyObject *ListSubscript(PyObject *, PyObject *);
++ static Py_ssize_t ListAsSubscript(PyObject *, PyObject *, PyObject *);
++ 
++ static PyMappingMethods ListAsMapping = {
++     /* mp_length	*/ (lenfunc) ListLength,
++     /* mp_subscript     */ (binaryfunc) ListSubscript,
++     /* mp_ass_subscript */ (objobjargproc) ListAsSubscript,
++ };
++ 
++ static PyTypeObject ListType;
++ 
++     static PyObject *
++ ListSubscript(PyObject *self, PyObject* idxObject)
++ {
++     if (PyLong_Check(idxObject))
++     {
++ 	long idx = PyLong_AsLong(idxObject);
++ 	return ListItem(self, idx);
++     }
++     else if (PySlice_Check(idxObject))
++     {
++ 	Py_ssize_t start, stop, step, slicelen;
++ 
++ 	if (PySlice_GetIndicesEx(idxObject, ListLength(self), &start, &stop,
++ 				 &step, &slicelen) < 0)
++ 	    return NULL;
++ 	return ListSlice(self, start, stop);
++     }
++     else
++     {
++ 	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
++ 	return NULL;
++     }
++ }
++ 
++     static Py_ssize_t
++ ListAsSubscript(PyObject *self, PyObject *idxObject, PyObject *obj)
++ {
++     if (PyLong_Check(idxObject))
++     {
++ 	long idx = PyLong_AsLong(idxObject);
++ 	return ListAssItem(self, idx, obj);
++     }
++     else if (PySlice_Check(idxObject))
++     {
++ 	Py_ssize_t start, stop, step, slicelen;
++ 
++ 	if (PySlice_GetIndicesEx(idxObject, ListLength(self), &start, &stop,
++ 				 &step, &slicelen) < 0)
++ 	    return -1;
++ 	return ListAssSlice(self, start, stop, obj);
++     }
++     else
++     {
++ 	PyErr_SetString(PyExc_IndexError, "Index must be int or slice");
++ 	return -1;
++     }
++ }
++ 
++     static void
++ ListDestructor(PyObject *self)
++ {
++     ListObject *this = (ListObject *)(self);
++ 
++     pyll_remove(&this->ref, &lastlist);
++     list_unref(this->list);
++ 
++     Py_TYPE(self)->tp_free((PyObject*)self);
++ }
++ 
++ /* Function object - Definitions
++  */
++ 
++     static void
++ FunctionDestructor(PyObject *self)
++ {
++     FunctionObject	*this = (FunctionObject *) (self);
++ 
++     func_unref(this->name);
++     PyMem_Del(this->name);
++ 
++     Py_TYPE(self)->tp_free((PyObject*)self);
++ }
++ 
++     static PyObject *
++ FunctionGetattro(PyObject *self, PyObject *nameobj)
++ {
++     FunctionObject	*this = (FunctionObject *)(self);
++     char	*name = "";
++     if (PyUnicode_Check(nameobj))
++ 	name = _PyUnicode_AsString(nameobj);
++ 
++     if (strcmp(name, "name") == 0)
++ 	return PyUnicode_FromString((char *)(this->name));
++ 
++     return PyObject_GenericGetAttr(self, nameobj);
++ }
++ 
+  /* External interface
+   */
+  
+***************
+*** 1449,1454 ****
+--- 1734,1742 ----
+      PyType_Ready(&BufListType);
+      PyType_Ready(&WinListType);
+      PyType_Ready(&CurrentType);
++     PyType_Ready(&DictionaryType);
++     PyType_Ready(&ListType);
++     PyType_Ready(&FunctionType);
+  
+      /* Set sys.argv[] to avoid a crash in warn(). */
+      PySys_SetArgv(1, argv);
+***************
+*** 1517,1522 ****
+--- 1805,1828 ----
+      return result;
+  }
+  
++     void
++ do_py3eval (char_u *str, typval_T *rettv)
++ {
++     DoPy3Command(NULL, (char *) str, rettv);
++     switch(rettv->v_type)
++     {
++ 	case VAR_DICT: ++rettv->vval.v_dict->dv_refcount; break;
++ 	case VAR_LIST: ++rettv->vval.v_list->lv_refcount; break;
++ 	case VAR_FUNC: func_ref(rettv->vval.v_string);    break;
++     }
++ }
++ 
++     void
++ set_ref_in_python3 (int copyID)
++ {
++     set_ref_in_py(copyID);
++ }
++ 
+      static void
+  init_structs(void)
+  {
+***************
+*** 1598,1603 ****
+--- 1904,1938 ----
+      CurrentType.tp_flags = Py_TPFLAGS_DEFAULT;
+      CurrentType.tp_doc = "vim current object";
+  
++     vim_memset(&DictionaryType, 0, sizeof(DictionaryType));
++     DictionaryType.tp_name = "vim.dictionary";
++     DictionaryType.tp_basicsize = sizeof(DictionaryObject);
++     DictionaryType.tp_dealloc = DictionaryDestructor;
++     DictionaryType.tp_as_mapping = &DictionaryAsMapping;
++     DictionaryType.tp_flags = Py_TPFLAGS_DEFAULT;
++     DictionaryType.tp_doc = "dictionary pushing modifications to vim structure";
++     DictionaryType.tp_methods = DictionaryMethods;
++ 
++     vim_memset(&ListType, 0, sizeof(ListType));
++     ListType.tp_name = "vim.list";
++     ListType.tp_dealloc = ListDestructor;
++     ListType.tp_basicsize = sizeof(ListObject);
++     ListType.tp_as_sequence = &ListAsSeq;
++     ListType.tp_as_mapping = &ListAsMapping;
++     ListType.tp_flags = Py_TPFLAGS_DEFAULT;
++     ListType.tp_doc = "list pushing modifications to vim structure";
++     ListType.tp_methods = ListMethods;
++ 
++     vim_memset(&FunctionType, 0, sizeof(FunctionType));
++     FunctionType.tp_name = "vim.list";
++     FunctionType.tp_basicsize = sizeof(FunctionObject);
++     FunctionType.tp_getattro = FunctionGetattro;
++     FunctionType.tp_dealloc = FunctionDestructor;
++     FunctionType.tp_call = FunctionCall;
++     FunctionType.tp_flags = Py_TPFLAGS_DEFAULT;
++     FunctionType.tp_doc = "object that calls vim function";
++     FunctionType.tp_methods = FunctionMethods;
++ 
+      vim_memset(&vimmodule, 0, sizeof(vimmodule));
+      vimmodule.m_name = "vim";
+      vimmodule.m_doc = vim_module_doc;
+*** ../vim-7.3.568/src/proto/eval.pro	2011-09-14 16:52:02.000000000 +0200
+--- src/proto/eval.pro	2012-06-20 18:20:28.000000000 +0200
+***************
+*** 46,57 ****
+--- 46,66 ----
+  list_T *list_alloc __ARGS((void));
+  void list_unref __ARGS((list_T *l));
+  void list_free __ARGS((list_T *l, int recurse));
++ listitem_T *listitem_alloc __ARGS((void));
++ void listitem_remove __ARGS((list_T *l, listitem_T *item));
+  dictitem_T *dict_lookup __ARGS((hashitem_T *hi));
++ listitem_T *list_find __ARGS((list_T *l, long n));
+  char_u *list_find_str __ARGS((list_T *l, long idx));
++ void list_append __ARGS((list_T *l, listitem_T *item));
+  int list_append_tv __ARGS((list_T *l, typval_T *tv));
+  int list_append_dict __ARGS((list_T *list, dict_T *dict));
+  int list_append_string __ARGS((list_T *l, char_u *str, int len));
++ int list_insert_tv __ARGS((list_T *l, typval_T *tv, listitem_T *item));
++ void list_remove __ARGS((list_T *l, listitem_T *item, listitem_T *item2));
+  int garbage_collect __ARGS((void));
++ void set_ref_in_ht __ARGS((hashtab_T *ht, int copyID));
++ void set_ref_in_list __ARGS((list_T *l, int copyID));
++ void set_ref_in_item __ARGS((typval_T *tv, int copyID));
+  dict_T *dict_alloc __ARGS((void));
+  void dict_unref __ARGS((dict_T *d));
+  dictitem_T *dictitem_alloc __ARGS((char_u *key));
+***************
+*** 64,69 ****
+--- 73,79 ----
+  long get_dict_number __ARGS((dict_T *d, char_u *key));
+  char_u *get_function_name __ARGS((expand_T *xp, int idx));
+  char_u *get_expr_name __ARGS((expand_T *xp, int idx));
++ int func_call __ARGS((char_u *name, typval_T *args, dict_T *selfdict, typval_T *rettv));
+  long do_searchpair __ARGS((char_u *spat, char_u *mpat, char_u *epat, int dir, char_u *skip, int flags, pos_T *match_pos, linenr_T lnum_stop, long time_limit));
+  void set_vim_var_nr __ARGS((int idx, long val));
+  long get_vim_var_nr __ARGS((int idx));
+***************
+*** 94,99 ****
+--- 104,111 ----
+  void func_dump_profile __ARGS((FILE *fd));
+  char_u *get_user_func_name __ARGS((expand_T *xp, int idx));
+  void ex_delfunction __ARGS((exarg_T *eap));
++ void func_unref __ARGS((char_u *name));
++ void func_ref __ARGS((char_u *name));
+  void ex_return __ARGS((exarg_T *eap));
+  int do_return __ARGS((exarg_T *eap, int reanimate, int is_cmd, void *rettv));
+  void discard_pending_return __ARGS((void *rettv));
+*** ../vim-7.3.568/src/proto/if_python.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/if_python.pro	2012-06-20 18:23:06.000000000 +0200
+***************
+*** 6,9 ****
+--- 6,11 ----
+  void ex_pyfile __ARGS((exarg_T *eap));
+  void python_buffer_free __ARGS((buf_T *buf));
+  void python_window_free __ARGS((win_T *win));
++ void do_pyeval __ARGS((char_u *str, typval_T *rettv));
++ void set_ref_in_python __ARGS((int copyID));
+  /* vim: set ft=c : */
+*** ../vim-7.3.568/src/proto/if_python3.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/if_python3.pro	2012-06-20 18:34:26.000000000 +0200
+***************
+*** 6,9 ****
+--- 6,11 ----
+  void ex_py3file __ARGS((exarg_T *eap));
+  void python3_buffer_free __ARGS((buf_T *buf));
+  void python3_window_free __ARGS((win_T *win));
++ void do_py3eval __ARGS((char_u *str, typval_T *rettv));
++ void set_ref_in_python3 __ARGS((int copyID));
+  /* vim: set ft=c : */
+*** ../vim-7.3.568/src/testdir/Make_amiga.mak	2012-04-05 16:56:38.000000000 +0200
+--- src/testdir/Make_amiga.mak	2012-06-20 18:43:05.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,20 ----
+  # test27	can't edit file with "*"
+  # test52	only for Win32
+  # test85	no Lua interface
++ # test86, 87	no Python interface
+  
+  SCRIPTS = test1.out test3.out test4.out test5.out test6.out \
+  		test7.out test8.out test9.out \
+*** ../vim-7.3.568/src/testdir/Make_dos.mak	2012-04-13 19:11:16.000000000 +0200
+--- src/testdir/Make_dos.mak	2012-06-20 18:43:45.000000000 +0200
+***************
+*** 30,36 ****
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 30,36 ----
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out test86.out test87.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.568/src/testdir/Make_ming.mak	2012-04-13 19:11:16.000000000 +0200
+--- src/testdir/Make_ming.mak	2012-06-20 18:44:12.000000000 +0200
+***************
+*** 50,56 ****
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+--- 50,56 ----
+  		test68.out test69.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out test86.out test87.out
+  
+  SCRIPTS32 =	test50.out test70.out
+  
+*** ../vim-7.3.568/src/testdir/Make_os2.mak	2012-04-05 16:56:38.000000000 +0200
+--- src/testdir/Make_os2.mak	2012-06-20 18:44:32.000000000 +0200
+***************
+*** 14,19 ****
+--- 14,20 ----
+  # test27	can't edit file with "*" in file name
+  # test52	only for Win32
+  # test85	no Lua interface
++ # test86, 87	no Python interface
+  
+  SCRIPTS = test1.out test3.out test4.out test5.out test6.out \
+  		test7.out test8.out test9.out \
+*** ../vim-7.3.568/src/testdir/Makefile	2012-04-05 16:56:38.000000000 +0200
+--- src/testdir/Makefile	2012-06-29 11:56:00.000000000 +0200
+***************
+*** 27,33 ****
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out
+  
+  SCRIPTS_GUI = test16.out
+  
+--- 27,33 ----
+  		test69.out test70.out test71.out test72.out test73.out \
+  		test74.out test75.out test76.out test77.out test78.out \
+  		test79.out test80.out test81.out test82.out test83.out \
+! 		test84.out test85.out test86.out test87.out
+  
+  SCRIPTS_GUI = test16.out
+  
+*** ../vim-7.3.568/src/testdir/test86.in	2012-06-20 20:19:31.000000000 +0200
+--- src/testdir/test86.in	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 0 ****
+--- 1,211 ----
++ Tests for various python features.     vim: set ft=vim :
++ 
++ STARTTEST
++ :so small.vim
++ :if !has('python') | e! test.ok | wq! test.out | endif
++ :py import vim
++ :fun Test()
++ :let l = []
++ :py l=vim.bindeval('l')
++ :py f=vim.bindeval('function("strlen")')
++ :" Extending List directly with different types
++ :py l.extend([1, "as'd", [1, 2, f, {'a': 1}]])
++ :$put =string(l)
++ :$put =string(l[-1])
++ :try
++ :  $put =string(l[-4])
++ :catch
++ :  $put =v:exception[:13]
++ :endtry
++ :" List assignment
++ :py l[0]=0
++ :$put =string(l)
++ :py l[-2]=f
++ :$put =string(l)
++ :"
++ :" Extending Dictionary directly with different types
++ :let d = {}
++ :py d=vim.bindeval('d')
++ :py d['1']='asd'
++ :py d['b']=[1, 2, f]
++ :py d['-1']={'a': 1}
++ :let dkeys = []
++ :py dk=vim.bindeval('dkeys')
++ :py dkeys=d.keys()
++ :py dkeys.sort()
++ :py dk.extend(dkeys)
++ :$put =string(dkeys)
++ :for [key, val] in sort(items(d))
++ :  $put =string(key) . ' : ' . string(val)
++ :  unlet key val
++ :endfor
++ :"
++ :" removing items with del
++ :py del l[2]
++ :$put =string(l)
++ :let l = range(8)
++ :py l=vim.bindeval('l')
++ :try
++ :   py del l[:3]
++ :   py del l[1:]
++ :catch
++ :   $put =v:exception
++ :endtry
++ :$put =string(l)
++ :"
++ :py del d['-1']
++ :$put =string(d)
++ :"
++ :" removing items out of range: silently skip items that don't exist
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :" The following two ranges delete nothing as they match empty list:
++ :py del l[2:1]
++ :$put =string(l)
++ :py del l[2:2]
++ :$put =string(l)
++ :py del l[2:3]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[2:4]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[2:5]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[2:6]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :" The following two ranges delete nothing as they match empty list:
++ :py del l[-1:2]
++ :$put =string(l)
++ :py del l[-2:2]
++ :$put =string(l)
++ :py del l[-3:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[-4:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[-5:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py del l[-6:2]
++ :$put =string(l)
++ :"
++ :" Slice assignment to a list
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[0:0]=['a']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[1:2]=['b']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[2:4]=['c']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[4:4]=['d']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[-1:2]=['e']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[-10:2]=['f']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :py l[2:-10]=['g']
++ :$put =string(l)
++ :let l = []
++ :py l=vim.bindeval('l')
++ :py l[0:0]=['h']
++ :$put =string(l)
++ :"
++ :" Locked variables
++ :let l = [0, 1, 2, 3]
++ :py l=vim.bindeval('l')
++ :lockvar! l
++ :py l[2]='i'
++ :$put =string(l)
++ :unlockvar! l
++ :"
++ :" Function calls
++ :function New(...)
++ :return ['NewStart']+a:000+['NewEnd']
++ :endfunction
++ :function DictNew(...) dict
++ :return ['DictNewStart']+a:000+['DictNewEnd', self]
++ :endfunction
++ :let l=[function('New'), function('DictNew')]
++ :py l=vim.bindeval('l')
++ :py l.extend(list(l[0](1, 2, 3)))
++ :$put =string(l)
++ :py l.extend(list(l[1](1, 2, 3, self={'a': 'b'})))
++ :$put =string(l)
++ :py l.extend([l[0].name])
++ :$put =string(l)
++ :try
++ :   py l[1](1, 2, 3)
++ :catch
++ :   $put =v:exception[:16]
++ :endtry
++ :delfunction New
++ :try
++ :   py l[0](1, 2, 3)
++ :catch
++ :   $put =v:exception[:16]
++ :endtry
++ :if has('float')
++ :   let l=[0.0]
++ :   py l=vim.bindeval('l')
++ :   py l.extend([0.0])
++ :   $put =string(l)
++ :else
++ :   $put ='[0.0, 0.0]'
++ :endif
++ :"
++ :" pyeval()
++ :let l=pyeval('range(3)')
++ :$put =string(l)
++ :let d=pyeval('{"a": "b", "c": 1, "d": ["e"]}')
++ :$put =sort(items(d))
++ :try
++ :   let undef=pyeval('undefined_name')
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :try
++ :   let vim=pyeval('vim')
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :if has('float')
++ :   let f=pyeval('0.0')
++ :   $put =string(f)
++ :else
++ :   $put ='0.0'
++ :endif
++ :endfun
++ :"
++ :call Test()
++ :"
++ :delfunc Test
++ :call garbagecollect(1)
++ :"
++ :/^start:/,$wq! test.out
++ ENDTEST
++ 
++ start:
+*** ../vim-7.3.568/src/testdir/test86.ok	2012-06-20 20:19:31.000000000 +0200
+--- src/testdir/test86.ok	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 0 ****
+--- 1,47 ----
++ start:
++ [1, 'as''d', [1, 2, function('strlen'), {'a': 1}]]
++ [1, 2, function('strlen'), {'a': 1}]
++ Vim(put):E684:
++ [0, 'as''d', [1, 2, function('strlen'), {'a': 1}]]
++ [0, function('strlen'), [1, 2, function('strlen'), {'a': 1}]]
++ ['-1', '1', 'b']
++ '-1' : {'a': 1}
++ '1' : 'asd'
++ 'b' : [1, 2, function('strlen')]
++ [0, function('strlen')]
++ [3]
++ {'1': 'asd', 'b': [1, 2, function('strlen')]}
++ [0, 1, 2, 3]
++ [0, 1, 2, 3]
++ [0, 1, 3]
++ [0, 1]
++ [0, 1]
++ [0, 1]
++ [0, 1, 2, 3]
++ [0, 1, 2, 3]
++ [0, 2, 3]
++ [2, 3]
++ [2, 3]
++ [2, 3]
++ ['a', 0, 1, 2, 3]
++ [0, 'b', 2, 3]
++ [0, 1, 'c']
++ [0, 1, 2, 3, 'd']
++ [0, 1, 2, 'e', 3]
++ ['f', 2, 3]
++ [0, 1, 'g', 2, 3]
++ ['h']
++ [0, 1, 2, 3]
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd']
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd', 'DictNewStart', 1, 2, 3, 'DictNewEnd', {'a': 'b'}]
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd', 'DictNewStart', 1, 2, 3, 'DictNewEnd', {'a': 'b'}, 'New']
++ Vim(python):E725:
++ Vim(python):E117:
++ [0.0, 0.0]
++ [0, 1, 2]
++ ['a', 'b']
++ ['c', 1]
++ ['d', ['e']]
++ Vim(let):E858:
++ Vim(let):E859:
++ 0.0
+*** ../vim-7.3.568/src/testdir/test87.in	2012-06-20 20:19:31.000000000 +0200
+--- src/testdir/test87.in	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 0 ****
+--- 1,211 ----
++ Tests for various python features.     vim: set ft=vim :
++ 
++ STARTTEST
++ :so small.vim
++ :if !has('python3') | e! test.ok | wq! test.out | endif
++ :py3 import vim
++ :fun Test()
++ :let l = []
++ :py3 l=vim.bindeval('l')
++ :py3 f=vim.bindeval('function("strlen")')
++ :" Extending List directly with different types
++ :py3 l+=[1, "as'd", [1, 2, f, {'a': 1}]]
++ :$put =string(l)
++ :$put =string(l[-1])
++ :try
++ :  $put =string(l[-4])
++ :catch
++ :  $put =v:exception[:13]
++ :endtry
++ :" List assignment
++ :py3 l[0]=0
++ :$put =string(l)
++ :py3 l[-2]=f
++ :$put =string(l)
++ :"
++ :" Extending Dictionary directly with different types
++ :let d = {}
++ :py3 d=vim.bindeval('d')
++ :py3 d['1']='asd'
++ :py3 d['b']=[1, 2, f]
++ :py3 d['-1']={'a': 1}
++ :let dkeys = []
++ :py3 dk=vim.bindeval('dkeys')
++ :py3 dkeys=d.keys()
++ :py3 dkeys.sort()
++ :py3 dk+=dkeys
++ :$put =string(dkeys)
++ :for [key, val] in sort(items(d))
++ :  $put =string(key) . ' : ' . string(val)
++ :  unlet key val
++ :endfor
++ :"
++ :" removing items with del
++ :py3 del l[2]
++ :$put =string(l)
++ :let l = range(8)
++ :py3 l=vim.bindeval('l')
++ :try
++ :   py3 del l[:3]
++ :   py3 del l[1:]
++ :catch
++ :   $put =v:exception
++ :endtry
++ :$put =string(l)
++ :"
++ :py3 del d['-1']
++ :$put =string(d)
++ :"
++ :" removing items out of range: silently skip items that don't exist
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :" The following two ranges delete nothing as they match empty list:
++ :py3 del l[2:1]
++ :$put =string(l)
++ :py3 del l[2:2]
++ :$put =string(l)
++ :py3 del l[2:3]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[2:4]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[2:5]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[2:6]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :" The following two ranges delete nothing as they match empty list:
++ :py3 del l[-1:2]
++ :$put =string(l)
++ :py3 del l[-2:2]
++ :$put =string(l)
++ :py3 del l[-3:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[-4:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[-5:2]
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 del l[-6:2]
++ :$put =string(l)
++ :"
++ :" Slice assignment to a list
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[0:0]=['a']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[1:2]=['b']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[2:4]=['c']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[4:4]=['d']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[-1:2]=['e']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[-10:2]=['f']
++ :$put =string(l)
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :py3 l[2:-10]=['g']
++ :$put =string(l)
++ :let l = []
++ :py3 l=vim.bindeval('l')
++ :py3 l[0:0]=['h']
++ :$put =string(l)
++ :"
++ :" Locked variables
++ :let l = [0, 1, 2, 3]
++ :py3 l=vim.bindeval('l')
++ :lockvar! l
++ :py3 l[2]='i'
++ :$put =string(l)
++ :unlockvar! l
++ :"
++ :" Function calls
++ :function New(...)
++ :return ['NewStart']+a:000+['NewEnd']
++ :endfunction
++ :function DictNew(...) dict
++ :return ['DictNewStart']+a:000+['DictNewEnd', self]
++ :endfunction
++ :let l=[function('New'), function('DictNew')]
++ :py3 l=vim.bindeval('l')
++ :py3 l.extend(list(l[0](1, 2, 3)))
++ :$put =string(l)
++ :py3 l.extend(list(l[1](1, 2, 3, self={'a': 'b'})))
++ :$put =string(l)
++ :py3 l+=[l[0].name]
++ :$put =string(l)
++ :try
++ :   py3 l[1](1, 2, 3)
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :delfunction New
++ :try
++ :   py3 l[0](1, 2, 3)
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :if has('float')
++ :   let l=[0.0]
++ :   py3 l=vim.bindeval('l')
++ :   py3 l.extend([0.0])
++ :   $put =string(l)
++ :else
++ :   $put ='[0.0, 0.0]'
++ :endif
++ :"
++ :" py3eval()
++ :let l=py3eval('[0, 1, 2]')
++ :$put =string(l)
++ :let d=py3eval('{"a": "b", "c": 1, "d": ["e"]}')
++ :$put =sort(items(d))
++ :try
++ :   let undef=py3eval('undefined_name')
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :try
++ :   let vim=py3eval('vim')
++ :catch
++ :   $put =v:exception[:13]
++ :endtry
++ :if has('float')
++ :   let f=py3eval('0.0')
++ :   $put =string(f)
++ :else
++ :   $put ='0.0'
++ :endif
++ :endfun
++ :"
++ :call Test()
++ :"
++ :delfunc Test
++ :call garbagecollect(1)
++ :"
++ :/^start:/,$wq! test.out
++ ENDTEST
++ 
++ start:
+*** ../vim-7.3.568/src/testdir/test87.ok	2012-06-20 20:19:31.000000000 +0200
+--- src/testdir/test87.ok	2012-06-20 18:01:02.000000000 +0200
+***************
+*** 0 ****
+--- 1,47 ----
++ start:
++ [1, 'as''d', [1, 2, function('strlen'), {'a': 1}]]
++ [1, 2, function('strlen'), {'a': 1}]
++ Vim(put):E684:
++ [0, 'as''d', [1, 2, function('strlen'), {'a': 1}]]
++ [0, function('strlen'), [1, 2, function('strlen'), {'a': 1}]]
++ ['-1', '1', 'b']
++ '-1' : {'a': 1}
++ '1' : 'asd'
++ 'b' : [1, 2, function('strlen')]
++ [0, function('strlen')]
++ [3]
++ {'1': 'asd', 'b': [1, 2, function('strlen')]}
++ [0, 1, 2, 3]
++ [0, 1, 2, 3]
++ [0, 1, 3]
++ [0, 1]
++ [0, 1]
++ [0, 1]
++ [0, 1, 2, 3]
++ [0, 1, 2, 3]
++ [0, 2, 3]
++ [2, 3]
++ [2, 3]
++ [2, 3]
++ ['a', 0, 1, 2, 3]
++ [0, 'b', 2, 3]
++ [0, 1, 'c']
++ [0, 1, 2, 3, 'd']
++ [0, 1, 2, 'e', 3]
++ ['f', 2, 3]
++ [0, 1, 'g', 2, 3]
++ ['h']
++ [0, 1, 2, 3]
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd']
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd', 'DictNewStart', 1, 2, 3, 'DictNewEnd', {'a': 'b'}]
++ [function('New'), function('DictNew'), 'NewStart', 1, 2, 3, 'NewEnd', 'DictNewStart', 1, 2, 3, 'DictNewEnd', {'a': 'b'}, 'New']
++ Vim(py3):E725:
++ Vim(py3):E117:
++ [0.0, 0.0]
++ [0, 1, 2]
++ ['a', 'b']
++ ['c', 1]
++ ['d', ['e']]
++ Vim(let):E860:
++ Vim(let):E861:
++ 0.0
+*** ../vim-7.3.568/src/version.c	2012-06-29 12:35:40.000000000 +0200
+--- src/version.c	2012-06-29 12:47:03.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     569,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+69. Yahoo welcomes you with your own start page
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.570 b/source/ap/vim/patches/7.3.570
new file mode 100644
index 00000000..c644194d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.570
@@ -0,0 +1,145 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.570
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.570
+Problem:    ":vimgrep" does not obey 'wildignore'.
+Solution:   Apply 'wildignore' and 'suffixes' to ":vimgrep". (Ingo Karkat)
+Files:	    src/ex_cmds2.c, src/proto/ex_cmds2.pro, src/quickfix.c, src/spell.c
+
+
+*** ../vim-7.3.569/src/ex_cmds2.c	2012-06-20 15:48:53.000000000 +0200
+--- src/ex_cmds2.c	2012-06-29 12:43:34.000000000 +0200
+***************
+*** 1850,1871 ****
+  #if defined(FEAT_QUICKFIX) || defined(FEAT_SYN_HL) || defined(PROTO)
+  /*
+   * Parse a list of arguments (file names), expand them and return in
+!  * "fnames[fcountp]".
+   * Return FAIL or OK.
+   */
+      int
+! get_arglist_exp(str, fcountp, fnamesp)
+      char_u	*str;
+      int		*fcountp;
+      char_u	***fnamesp;
+  {
+      garray_T	ga;
+      int		i;
+  
+      if (get_arglist(&ga, str) == FAIL)
+  	return FAIL;
+!     i = gen_expand_wildcards(ga.ga_len, (char_u **)ga.ga_data,
+! 				       fcountp, fnamesp, EW_FILE|EW_NOTFOUND);
+      ga_clear(&ga);
+      return i;
+  }
+--- 1850,1877 ----
+  #if defined(FEAT_QUICKFIX) || defined(FEAT_SYN_HL) || defined(PROTO)
+  /*
+   * Parse a list of arguments (file names), expand them and return in
+!  * "fnames[fcountp]".  When "wig" is TRUE, removes files matching 'wildignore'.
+   * Return FAIL or OK.
+   */
+      int
+! get_arglist_exp(str, fcountp, fnamesp, wig)
+      char_u	*str;
+      int		*fcountp;
+      char_u	***fnamesp;
++     int		wig;
+  {
+      garray_T	ga;
+      int		i;
+  
+      if (get_arglist(&ga, str) == FAIL)
+  	return FAIL;
+!     if (wig == TRUE)
+! 	i = expand_wildcards(ga.ga_len, (char_u **)ga.ga_data,
+! 					fcountp, fnamesp, EW_FILE|EW_NOTFOUND);
+!     else
+! 	i = gen_expand_wildcards(ga.ga_len, (char_u **)ga.ga_data,
+! 					fcountp, fnamesp, EW_FILE|EW_NOTFOUND);
+! 
+      ga_clear(&ga);
+      return i;
+  }
+*** ../vim-7.3.569/src/proto/ex_cmds2.pro	2011-05-19 18:26:34.000000000 +0200
+--- src/proto/ex_cmds2.pro	2012-06-29 12:43:49.000000000 +0200
+***************
+*** 42,48 ****
+  int check_fname __ARGS((void));
+  int buf_write_all __ARGS((buf_T *buf, int forceit));
+  int get_arglist __ARGS((garray_T *gap, char_u *str));
+! int get_arglist_exp __ARGS((char_u *str, int *fcountp, char_u ***fnamesp));
+  void set_arglist __ARGS((char_u *str));
+  void check_arg_idx __ARGS((win_T *win));
+  void ex_args __ARGS((exarg_T *eap));
+--- 42,48 ----
+  int check_fname __ARGS((void));
+  int buf_write_all __ARGS((buf_T *buf, int forceit));
+  int get_arglist __ARGS((garray_T *gap, char_u *str));
+! int get_arglist_exp __ARGS((char_u *str, int *fcountp, char_u ***fnamesp, int wig));
+  void set_arglist __ARGS((char_u *str));
+  void check_arg_idx __ARGS((win_T *win));
+  void ex_args __ARGS((exarg_T *eap));
+*** ../vim-7.3.569/src/quickfix.c	2012-06-01 18:34:37.000000000 +0200
+--- src/quickfix.c	2012-06-29 12:43:49.000000000 +0200
+***************
+*** 3189,3195 ****
+  	    ;
+  
+      /* parse the list of arguments */
+!     if (get_arglist_exp(p, &fcount, &fnames) == FAIL)
+  	goto theend;
+      if (fcount == 0)
+      {
+--- 3189,3195 ----
+  	    ;
+  
+      /* parse the list of arguments */
+!     if (get_arglist_exp(p, &fcount, &fnames, TRUE) == FAIL)
+  	goto theend;
+      if (fcount == 0)
+      {
+*** ../vim-7.3.569/src/spell.c	2012-06-01 17:49:51.000000000 +0200
+--- src/spell.c	2012-06-29 12:43:49.000000000 +0200
+***************
+*** 8553,8559 ****
+      }
+  
+      /* Expand all the remaining arguments (e.g., $VIMRUNTIME). */
+!     if (get_arglist_exp(arg, &fcount, &fnames) == OK)
+      {
+  	mkspell(fcount, fnames, ascii, eap->forceit, FALSE);
+  	FreeWild(fcount, fnames);
+--- 8553,8559 ----
+      }
+  
+      /* Expand all the remaining arguments (e.g., $VIMRUNTIME). */
+!     if (get_arglist_exp(arg, &fcount, &fnames, FALSE) == OK)
+      {
+  	mkspell(fcount, fnames, ascii, eap->forceit, FALSE);
+  	FreeWild(fcount, fnames);
+*** ../vim-7.3.569/src/version.c	2012-06-29 12:54:32.000000000 +0200
+--- src/version.c	2012-06-29 12:56:12.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     570,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+70. ISDN lines are added to your house on a hourly basis
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.571 b/source/ap/vim/patches/7.3.571
new file mode 100644
index 00000000..ad62ffc2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.571
@@ -0,0 +1,117 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.571
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.571
+Problem:    Duplicated condition.
+Solution:   Remove one. (Dominique Pelle)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.570/src/os_win32.c	2012-02-29 13:58:43.000000000 +0100
+--- src/os_win32.c	2012-06-29 13:10:54.000000000 +0200
+***************
+*** 308,314 ****
+  # ifndef GETTEXT_DLL
+  #  define GETTEXT_DLL "libintl.dll"
+  # endif
+! /* Dummy funcitons */
+  static char *null_libintl_gettext(const char *);
+  static char *null_libintl_textdomain(const char *);
+  static char *null_libintl_bindtextdomain(const char *, const char *);
+--- 308,314 ----
+  # ifndef GETTEXT_DLL
+  #  define GETTEXT_DLL "libintl.dll"
+  # endif
+! /* Dummy functions */
+  static char *null_libintl_gettext(const char *);
+  static char *null_libintl_textdomain(const char *);
+  static char *null_libintl_bindtextdomain(const char *, const char *);
+***************
+*** 1409,1415 ****
+  
+  
+  /*
+!  * mch_inchar(): low-level input funcion.
+   * Get one or more characters from the keyboard or the mouse.
+   * If time == 0, do not wait for characters.
+   * If time == n, wait a short time for characters.
+--- 1409,1415 ----
+  
+  
+  /*
+!  * mch_inchar(): low-level input function.
+   * Get one or more characters from the keyboard or the mouse.
+   * If time == 0, do not wait for characters.
+   * If time == n, wait a short time for characters.
+***************
+*** 3451,3464 ****
+       * to avoid to perform a blocking read */
+      ret = PeekNamedPipe(g_hChildStd_OUT_Rd, /* pipe to query */
+  			NULL,		    /* optional buffer */
+! 			0,		    /* buffe size */
+  			NULL,		    /* number of read bytes */
+  			&availableBytes,    /* available bytes total */
+  			NULL);		    /* byteLeft */
+  
+      repeatCount = 0;
+      /* We got real data in the pipe, read it */
+!     while (ret != 0 && availableBytes > 0 && availableBytes > 0)
+      {
+  	repeatCount++;
+  	toRead =
+--- 3451,3464 ----
+       * to avoid to perform a blocking read */
+      ret = PeekNamedPipe(g_hChildStd_OUT_Rd, /* pipe to query */
+  			NULL,		    /* optional buffer */
+! 			0,		    /* buffer size */
+  			NULL,		    /* number of read bytes */
+  			&availableBytes,    /* available bytes total */
+  			NULL);		    /* byteLeft */
+  
+      repeatCount = 0;
+      /* We got real data in the pipe, read it */
+!     while (ret != 0 && availableBytes > 0)
+      {
+  	repeatCount++;
+  	toRead =
+***************
+*** 3638,3644 ****
+  		  NULL,			/* Process security attributes */
+  		  NULL,			/* Thread security attributes */
+  
+! 		  // this command can be litigeous, handle inheritence was
+  		  // deactivated for pending temp file, but, if we deactivate
+  		  // it, the pipes don't work for some reason.
+  		  TRUE,			/* Inherit handles, first deactivated,
+--- 3638,3644 ----
+  		  NULL,			/* Process security attributes */
+  		  NULL,			/* Thread security attributes */
+  
+! 		  // this command can be litigious, handle inheritance was
+  		  // deactivated for pending temp file, but, if we deactivate
+  		  // it, the pipes don't work for some reason.
+  		  TRUE,			/* Inherit handles, first deactivated,
+*** ../vim-7.3.570/src/version.c	2012-06-29 12:57:03.000000000 +0200
+--- src/version.c	2012-06-29 13:12:31.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     571,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+71. You wonder how people walk
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.572 b/source/ap/vim/patches/7.3.572
new file mode 100644
index 00000000..14fc127e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.572
@@ -0,0 +1,59 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.572
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.572
+Problem:    Duplicate statement in if and else. (Dominique Pelle)
+Solution:   Remove the condition and add a TODO.
+Files:	    src/gui_xmebw.c
+
+
+*** ../vim-7.3.571/src/gui_xmebw.c	2010-08-15 21:57:29.000000000 +0200
+--- src/gui_xmebw.c	2012-06-29 13:17:15.000000000 +0200
+***************
+*** 375,385 ****
+  
+      XGetGeometry(dpy, pix, &root, &x, &y, &width, &height, &border, &depth);
+  
+!     if (eb->enhancedbutton.label_location == (int)XmTOP
+! 	    || eb->enhancedbutton.label_location == (int)XmBOTTOM)
+! 	shift = eb->primitive.shadow_thickness / 2;
+!     else
+! 	shift = eb->primitive.shadow_thickness / 2;
+  
+      if (shift < 1)
+  	shift = 1;
+--- 375,382 ----
+  
+      XGetGeometry(dpy, pix, &root, &x, &y, &width, &height, &border, &depth);
+  
+!     /* TODO: does the shift depend on label_location somehow? */
+!     shift = eb->primitive.shadow_thickness / 2;
+  
+      if (shift < 1)
+  	shift = 1;
+*** ../vim-7.3.571/src/version.c	2012-06-29 13:13:59.000000000 +0200
+--- src/version.c	2012-06-29 13:18:41.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     572,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+72. Somebody at IRC just mentioned a way to obtain full motion video without
+    a PC using a wireless protocol called NTSC, you wonder how you never
+    heard about it
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.573 b/source/ap/vim/patches/7.3.573
new file mode 100644
index 00000000..7734a76a
--- /dev/null
+++ b/source/ap/vim/patches/7.3.573
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.573
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.573
+Problem:    Using array index before bounds checking.
+Solution:   Swap the parts of the condition. (Dominique Pelle)
+Files:	    src/ops.c
+
+
+*** ../vim-7.3.572/src/ops.c	2012-06-13 17:28:51.000000000 +0200
+--- src/ops.c	2012-06-29 13:27:11.000000000 +0200
+***************
+*** 6458,6464 ****
+      long	chars = 0;
+      int		is_word = 0;
+  
+!     for (i = 0; line[i] && i < limit; )
+      {
+  	if (is_word)
+  	{
+--- 6458,6464 ----
+      long	chars = 0;
+      int		is_word = 0;
+  
+!     for (i = 0; i < limit && line[i] != NUL; )
+      {
+  	if (is_word)
+  	{
+*** ../vim-7.3.572/src/version.c	2012-06-29 13:19:23.000000000 +0200
+--- src/version.c	2012-06-29 13:27:59.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     573,
+  /**/
+
+-- 
+"Thou shalt not follow the Null Pointer, for at its end Chaos and
+Madness lie."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.574 b/source/ap/vim/patches/7.3.574
new file mode 100644
index 00000000..e23d818f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.574
@@ -0,0 +1,88 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.574
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.574
+Problem:    When pasting a register in the search command line a CTRL-L
+	    character is not pasted. (Dominique Pelle)
+Solution:   Escape the CTRL-L. (Christian Brabandt)
+Files:	    src/ex_getln.c
+
+
+*** ../vim-7.3.573/src/ex_getln.c	2012-06-06 12:02:57.000000000 +0200
+--- src/ex_getln.c	2012-06-29 13:39:03.000000000 +0200
+***************
+*** 3133,3139 ****
+  	    else
+  #endif
+  		c = *s++;
+! 	    if (cv == Ctrl_V || c == ESC || c == Ctrl_C || c == CAR || c == NL
+  #ifdef UNIX
+  		    || c == intr_char
+  #endif
+--- 3133,3140 ----
+  	    else
+  #endif
+  		c = *s++;
+! 	    if (cv == Ctrl_V || c == ESC || c == Ctrl_C
+! 		    || c == CAR || c == NL || c == Ctrl_L
+  #ifdef UNIX
+  		    || c == intr_char
+  #endif
+***************
+*** 4692,4698 ****
+  		if (tab[i].ic)
+  		    regmatch.rm_ic = TRUE;
+  		ret = ExpandGeneric(xp, &regmatch, num_file, file,
+!                                                 tab[i].func, tab[i].escaped);
+  		break;
+  	    }
+      }
+--- 4693,4699 ----
+  		if (tab[i].ic)
+  		    regmatch.rm_ic = TRUE;
+  		ret = ExpandGeneric(xp, &regmatch, num_file, file,
+! 						tab[i].func, tab[i].escaped);
+  		break;
+  	    }
+      }
+***************
+*** 5125,5131 ****
+  	vim_free(matches);
+      }
+      if (ga.ga_len == 0)
+!         return FAIL;
+  
+      /* Sort and remove duplicates which can happen when specifying multiple
+       * directories in dirnames. */
+--- 5126,5132 ----
+  	vim_free(matches);
+      }
+      if (ga.ga_len == 0)
+! 	return FAIL;
+  
+      /* Sort and remove duplicates which can happen when specifying multiple
+       * directories in dirnames. */
+*** ../vim-7.3.573/src/version.c	2012-06-29 13:34:15.000000000 +0200
+--- src/version.c	2012-06-29 13:38:22.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     574,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+73. You give your dog used motherboards instead of bones
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.575 b/source/ap/vim/patches/7.3.575
new file mode 100644
index 00000000..f5d80d72
--- /dev/null
+++ b/source/ap/vim/patches/7.3.575
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.575
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.575
+Problem:    "ygt" tries to yank instead of giving an error. (Daniel Mueller)
+Solution:   Check for a pending operator.
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.574/src/normal.c	2012-06-06 16:12:54.000000000 +0200
+--- src/normal.c	2012-06-29 13:50:26.000000000 +0200
+***************
+*** 8393,8402 ****
+  
+  #ifdef FEAT_WINDOWS
+      case 't':
+! 	goto_tabpage((int)cap->count0);
+  	break;
+      case 'T':
+! 	goto_tabpage(-(int)cap->count1);
+  	break;
+  #endif
+  
+--- 8393,8404 ----
+  
+  #ifdef FEAT_WINDOWS
+      case 't':
+! 	if (!checkclearop(oap))
+! 	    goto_tabpage((int)cap->count0);
+  	break;
+      case 'T':
+! 	if (!checkclearop(oap))
+! 	    goto_tabpage(-(int)cap->count1);
+  	break;
+  #endif
+  
+*** ../vim-7.3.574/src/version.c	2012-06-29 13:44:37.000000000 +0200
+--- src/version.c	2012-06-29 13:52:01.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     575,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+74. Your most erotic dreams are about cybersex
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.576 b/source/ap/vim/patches/7.3.576
new file mode 100644
index 00000000..bc226d90
--- /dev/null
+++ b/source/ap/vim/patches/7.3.576
@@ -0,0 +1,255 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.576
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.576
+Problem:    Formatting of lists inside comments is not right yet.
+Solution:   Use another solution and add a test. (Tor Perkins)
+Files:	    src/edit.c, src/misc1.c, src/testdir/test68.in,
+	    src/testdir/test69.ok
+
+
+*** ../vim-7.3.575/src/edit.c	2012-06-20 22:55:56.000000000 +0200
+--- src/edit.c	2012-06-29 14:10:36.000000000 +0200
+***************
+*** 6320,6333 ****
+  	    if (!(flags & INSCHAR_COM_LIST))
+  	    {
+  		/*
+! 		 * This section is for numeric lists w/o comments.  If comment
+! 		 * indents are needed with numeric lists (formatoptions=nq),
+! 		 * then the INSCHAR_COM_LIST flag will cause the corresponding
+! 		 * OPENLINE_COM_LIST flag to be passed through to open_line()
+! 		 * (as seen above)...
+  		 */
+  		if (second_indent < 0 && has_format_option(FO_Q_NUMBER))
+! 		    second_indent = get_number_indent(curwin->w_cursor.lnum -1);
+  		if (second_indent >= 0)
+  		{
+  #ifdef FEAT_VREPLACE
+--- 6320,6334 ----
+  	    if (!(flags & INSCHAR_COM_LIST))
+  	    {
+  		/*
+! 		 * This section is for auto-wrap of numeric lists.  When not
+! 		 * in insert mode (i.e. format_lines()), the INSCHAR_COM_LIST
+! 		 * flag will be set and open_line() will handle it (as seen
+! 		 * above).  The code here (and in get_number_indent()) will
+! 		 * recognize comments if needed...
+  		 */
+  		if (second_indent < 0 && has_format_option(FO_Q_NUMBER))
+! 		    second_indent =
+! 				 get_number_indent(curwin->w_cursor.lnum - 1);
+  		if (second_indent >= 0)
+  		{
+  #ifdef FEAT_VREPLACE
+***************
+*** 6336,6342 ****
+--- 6337,6367 ----
+  							    FALSE, NUL, TRUE);
+  		    else
+  #endif
++ #ifdef FEAT_COMMENTS
++ 			if (leader_len > 0 && second_indent - leader_len > 0)
++ 		    {
++ 			int i;
++ 			int padding = second_indent - leader_len;
++ 
++ 			/* We started at the first_line of a numbered list
++ 			 * that has a comment.  the open_line() function has
++ 			 * inserted the proper comment leader and positioned
++ 			 * the cursor at the end of the split line.  Now we
++ 			 * add the additional whitespace needed after the
++ 			 * comment leader for the numbered list.  */
++ 			for (i = 0; i < padding; i++)
++ 			{
++ 			    ins_str((char_u *)" ");
++ 			    changed_bytes(curwin->w_cursor.lnum, leader_len);
++ 			}
++ 		    }
++ 		    else
++ 		    {
++ #endif
+  			(void)set_indent(second_indent, SIN_CHANGED);
++ #ifdef FEAT_COMMENTS
++ 		    }
++ #endif
+  		}
+  	    }
+  	    first_line = FALSE;
+*** ../vim-7.3.575/src/misc1.c	2012-06-20 17:56:06.000000000 +0200
+--- src/misc1.c	2012-06-29 14:10:12.000000000 +0200
+***************
+*** 424,491 ****
+      colnr_T	col;
+      pos_T	pos;
+  
+      if (lnum > curbuf->b_ml.ml_line_count)
+  	return -1;
+      pos.lnum = 0;
+  
+  #ifdef FEAT_COMMENTS
+!     if (has_format_option(FO_Q_COMS) && has_format_option(FO_Q_NUMBER))
+!     {
+! 	regmatch_T  regmatch;
+! 	int	    lead_len;	      /* length of comment leader */
+! 
+  	lead_len = get_leader_len(ml_get(lnum), NULL, FALSE, TRUE);
+- 	regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
+- 	if (regmatch.regprog != NULL)
+- 	{
+- 	    regmatch.rm_ic = FALSE;
+- 
+- 	    /* vim_regexec() expects a pointer to a line.  This lets us
+- 	     * start matching for the flp beyond any comment leader...  */
+- 	    if (vim_regexec(&regmatch, ml_get(lnum) + lead_len, (colnr_T)0))
+- 	    {
+- 		pos.lnum = lnum;
+- 		pos.col = (colnr_T)(*regmatch.endp - ml_get(lnum));
+- #ifdef FEAT_VIRTUALEDIT
+- 		pos.coladd = 0;
+  #endif
+! 	    }
+! 	}
+! 	vim_free(regmatch.regprog);
+!     }
+!     else
+      {
+! 	/*
+! 	 * What follows is the orig code that is not "comment aware"...
+! 	 *
+! 	 * I'm not sure if regmmatch_T (multi-match) is needed in this case.
+! 	 * It may be true that this section would work properly using the
+! 	 * regmatch_T code above, in which case, these two separate sections
+! 	 * should be consolidated w/ FEAT_COMMENTS making lead_len > 0...
+! 	 */
+! #endif
+! 	regmmatch_T  regmatch;
+  
+! 	regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
+! 
+! 	if (regmatch.regprog != NULL)
+  	{
+! 	    regmatch.rmm_ic = FALSE;
+! 	    regmatch.rmm_maxcol = 0;
+! 	    if (vim_regexec_multi(&regmatch, curwin, curbuf,
+! 						      lnum, (colnr_T)0, NULL))
+! 	    {
+! 		pos.lnum = regmatch.endpos[0].lnum + lnum;
+! 		pos.col = regmatch.endpos[0].col;
+  #ifdef FEAT_VIRTUALEDIT
+! 		pos.coladd = 0;
+  #endif
+- 	    }
+- 	    vim_free(regmatch.regprog);
+  	}
+- #ifdef FEAT_COMMENTS
+      }
+! #endif
+  
+      if (pos.lnum == 0 || *ml_get_pos(&pos) == NUL)
+  	return -1;
+--- 424,458 ----
+      colnr_T	col;
+      pos_T	pos;
+  
++     regmatch_T	regmatch;
++     int		lead_len = 0;	/* length of comment leader */
++ 
+      if (lnum > curbuf->b_ml.ml_line_count)
+  	return -1;
+      pos.lnum = 0;
+  
+  #ifdef FEAT_COMMENTS
+!     /* In format_lines() (i.e. not insert mode), fo+=q is needed too...  */
+!     if ((State & INSERT) || has_format_option(FO_Q_COMS))
+  	lead_len = get_leader_len(ml_get(lnum), NULL, FALSE, TRUE);
+  #endif
+!     regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
+!     if (regmatch.regprog != NULL)
+      {
+! 	regmatch.rm_ic = FALSE;
+  
+! 	/* vim_regexec() expects a pointer to a line.  This lets us
+! 	 * start matching for the flp beyond any comment leader...  */
+! 	if (vim_regexec(&regmatch, ml_get(lnum) + lead_len, (colnr_T)0))
+  	{
+! 	    pos.lnum = lnum;
+! 	    pos.col = (colnr_T)(*regmatch.endp - ml_get(lnum));
+  #ifdef FEAT_VIRTUALEDIT
+! 	    pos.coladd = 0;
+  #endif
+  	}
+      }
+!     vim_free(regmatch.regprog);
+  
+      if (pos.lnum == 0 || *ml_get_pos(&pos) == NUL)
+  	return -1;
+*** ../vim-7.3.575/src/testdir/test68.in	2012-06-13 17:28:51.000000000 +0200
+--- src/testdir/test68.in	2012-06-29 14:27:27.000000000 +0200
+***************
+*** 52,57 ****
+--- 52,68 ----
+  
+  STARTTEST
+  /^{/+1
++ :set tw=5 fo=tcn comments=:#
++ A bjA b
++ ENDTEST
++ 
++ {
++   1 a
++ # 1 a
++ }
++ 
++ STARTTEST
++ /^{/+1
+  :set tw=5 fo=qn comments=:#
+  gwap
+  ENDTEST
+***************
+*** 83,88 ****
+--- 94,107 ----
+  }
+  
+  STARTTEST
++ /^#/
++ :setl tw=12 fo=tqnc comments=:#
++ A foobar
++ ENDTEST
++ 
++ # 1 xxxxx
++ 
++ STARTTEST
+  :g/^STARTTEST/.,/^ENDTEST/d
+  :1;/^Results/,$wq! test.out
+  ENDTEST
+*** ../vim-7.3.575/src/version.c	2012-06-29 13:56:01.000000000 +0200
+--- src/version.c	2012-06-29 15:03:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     576,
+  /**/
+
+-- 
+Proof techniques #2: Proof by Oddity.
+	SAMPLE: To prove that horses have an infinite number of legs.
+(1) Horses have an even number of legs.
+(2) They have two legs in back and fore legs in front.
+(3) This makes a total of six legs, which certainly is an odd number of
+    legs for a horse.
+(4) But the only number that is both odd and even is infinity.
+(5) Therefore, horses must have an infinite number of legs.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.577 b/source/ap/vim/patches/7.3.577
new file mode 100644
index 00000000..2929b22d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.577
@@ -0,0 +1,273 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.577
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.577
+Problem:    Size of memory does not fit in 32 bit unsigned.
+Solution:   Use Kbyte instead of byte.  Call GlobalMemoryStatusEx() instead of
+	    GlobalMemoryStatus() when available.
+Files:	    src/misc2.c, src/option.c, src/os_amiga.c, src/os_msdos.c,
+	    src/os_win16.c, src/os_win32.c
+
+
+*** ../vim-7.3.576/src/misc2.c	2012-02-29 13:58:43.000000000 +0100
+--- src/misc2.c	2012-06-29 15:30:54.000000000 +0200
+***************
+*** 815,820 ****
+--- 815,821 ----
+  #else
+  # define KEEP_ROOM (2 * 8192L)
+  #endif
++ #define KEEP_ROOM_KB (KEEP_ROOM / 1024L)
+  
+  /*
+   * Note: if unsigned is 16 bits we can only allocate up to 64K with alloc().
+***************
+*** 940,946 ****
+  	    allocated = 0;
+  # endif
+  	    /* 3. check for available memory: call mch_avail_mem() */
+! 	    if (mch_avail_mem(TRUE) < KEEP_ROOM && !releasing)
+  	    {
+  		free((char *)p);	/* System is low... no go! */
+  		p = NULL;
+--- 941,947 ----
+  	    allocated = 0;
+  # endif
+  	    /* 3. check for available memory: call mch_avail_mem() */
+! 	    if (mch_avail_mem(TRUE) < KEEP_ROOM_KB && !releasing)
+  	    {
+  		free((char *)p);	/* System is low... no go! */
+  		p = NULL;
+*** ../vim-7.3.576/src/option.c	2012-03-28 19:58:34.000000000 +0200
+--- src/option.c	2012-06-29 15:31:46.000000000 +0200
+***************
+*** 3154,3160 ****
+  	{
+  #ifdef HAVE_AVAIL_MEM
+  	    /* Use amount of memory available at this moment. */
+! 	    n = (mch_avail_mem(FALSE) >> 11);
+  #else
+  # ifdef HAVE_TOTAL_MEM
+  	    /* Use amount of memory available to Vim. */
+--- 3154,3160 ----
+  	{
+  #ifdef HAVE_AVAIL_MEM
+  	    /* Use amount of memory available at this moment. */
+! 	    n = (mch_avail_mem(FALSE) >> 1);
+  #else
+  # ifdef HAVE_TOTAL_MEM
+  	    /* Use amount of memory available to Vim. */
+***************
+*** 6702,6708 ****
+      {
+  	for (s = *varp; *s;)
+  	{
+! 	    while(*s == ',' || *s == ' ')
+  		s++;
+  	    if (!*s)
+  		break;
+--- 6702,6708 ----
+      {
+  	for (s = *varp; *s;)
+  	{
+! 	    while (*s == ',' || *s == ' ')
+  		s++;
+  	    if (!*s)
+  		break;
+***************
+*** 7391,7397 ****
+  	    new_unnamed |= CLIP_UNNAMED;
+  	    p += 7;
+  	}
+!         else if (STRNCMP(p, "unnamedplus", 11) == 0
+  					    && (p[11] == ',' || p[11] == NUL))
+  	{
+  	    new_unnamed |= CLIP_UNNAMED_PLUS;
+--- 7391,7397 ----
+  	    new_unnamed |= CLIP_UNNAMED;
+  	    p += 7;
+  	}
+! 	else if (STRNCMP(p, "unnamedplus", 11) == 0
+  					    && (p[11] == ',' || p[11] == NUL))
+  	{
+  	    new_unnamed |= CLIP_UNNAMED_PLUS;
+*** ../vim-7.3.576/src/os_amiga.c	2011-10-20 18:24:16.000000000 +0200
+--- src/os_amiga.c	2012-06-29 15:33:59.000000000 +0200
+***************
+*** 191,206 ****
+  }
+  
+  /*
+!  * Return amount of memory still available.
+   */
+      long_u
+  mch_avail_mem(special)
+      int	    special;
+  {
+  #ifdef __amigaos4__
+!     return (long_u)AvailMem(MEMF_ANY);
+  #else
+!     return (long_u)AvailMem(special ? (long)MEMF_CHIP : (long)MEMF_ANY);
+  #endif
+  }
+  
+--- 191,206 ----
+  }
+  
+  /*
+!  * Return amount of memory still available in Kbyte.
+   */
+      long_u
+  mch_avail_mem(special)
+      int	    special;
+  {
+  #ifdef __amigaos4__
+!     return (long_u)AvailMem(MEMF_ANY) >> 10;
+  #else
+!     return (long_u)(AvailMem(special ? (long)MEMF_CHIP : (long)MEMF_ANY)) >> 10;
+  #endif
+  }
+  
+*** ../vim-7.3.576/src/os_msdos.c	2011-06-19 01:14:22.000000000 +0200
+--- src/os_msdos.c	2012-06-29 15:33:26.000000000 +0200
+***************
+*** 550,564 ****
+  #endif
+  
+  /*
+!  * Return amount of memory currently available.
+   */
+      long_u
+  mch_avail_mem(int special)
+  {
+  #ifdef DJGPP
+!     return _go32_dpmi_remaining_virtual_memory();
+  #else
+!     return coreleft();
+  #endif
+  }
+  
+--- 550,564 ----
+  #endif
+  
+  /*
+!  * Return amount of memory currently available in Kbyte.
+   */
+      long_u
+  mch_avail_mem(int special)
+  {
+  #ifdef DJGPP
+!     return _go32_dpmi_remaining_virtual_memory() >> 10;
+  #else
+!     return coreleft() >> 10;
+  #endif
+  }
+  
+*** ../vim-7.3.576/src/os_win16.c	2011-10-20 18:24:16.000000000 +0200
+--- src/os_win16.c	2012-06-29 15:34:18.000000000 +0200
+***************
+*** 379,391 ****
+  
+  
+  /*
+!  * How much memory is available?
+   */
+      long_u
+  mch_avail_mem(
+      int special)
+  {
+!     return GetFreeSpace(0);
+  }
+  
+  
+--- 379,391 ----
+  
+  
+  /*
+!  * How much memory is available in Kbyte?
+   */
+      long_u
+  mch_avail_mem(
+      int special)
+  {
+!     return GetFreeSpace(0) >> 10;
+  }
+  
+  
+*** ../vim-7.3.576/src/os_win32.c	2012-06-29 13:13:59.000000000 +0200
+--- src/os_win32.c	2012-06-29 15:39:52.000000000 +0200
+***************
+*** 4992,5009 ****
+  
+  
+  /*
+!  * How much memory is available?
+   * Return sum of available physical and page file memory.
+   */
+  /*ARGSUSED*/
+      long_u
+  mch_avail_mem(int special)
+  {
+!     MEMORYSTATUS	ms;
+  
+!     ms.dwLength = sizeof(MEMORYSTATUS);
+!     GlobalMemoryStatus(&ms);
+!     return (long_u) (ms.dwAvailPhys + ms.dwAvailPageFile);
+  }
+  
+  #ifdef FEAT_MBYTE
+--- 4992,5020 ----
+  
+  
+  /*
+!  * How much memory is available in Kbyte?
+   * Return sum of available physical and page file memory.
+   */
+  /*ARGSUSED*/
+      long_u
+  mch_avail_mem(int special)
+  {
+!     if (g_PlatformId != VER_PLATFORM_WIN32_NT)
+!     {
+! 	MEMORYSTATUS	ms;
+  
+! 	ms.dwLength = sizeof(MEMORYSTATUS);
+! 	GlobalMemoryStatus(&ms);
+! 	return (long_u)((ms.dwAvailPhys + ms.dwAvailPageFile) >> 10);
+!     }
+!     else
+!     {
+! 	MEMORYSTATUSEX	ms;
+! 
+! 	ms.dwLength = sizeof(MEMORYSTATUSEX);
+! 	GlobalMemoryStatusEx(&ms);
+! 	return (long_u)((ms.ullAvailPhys + ms.ullAvailPageFile) >> 10);
+!     }
+  }
+  
+  #ifdef FEAT_MBYTE
+*** ../vim-7.3.576/src/version.c	2012-06-29 15:04:34.000000000 +0200
+--- src/version.c	2012-06-29 15:45:44.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     577,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+75. You start wondering whether you could actually upgrade your brain
+    with a Pentium Pro microprocessor 80.  The upgrade works just fine.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.578 b/source/ap/vim/patches/7.3.578
new file mode 100644
index 00000000..9b0aedd2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.578
@@ -0,0 +1,80 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.578
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.578
+Problem:    Misplaced declaration.
+Solution:   Move declaration to start of block.
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.577/src/if_py_both.h	2012-06-29 12:54:32.000000000 +0200
+--- src/if_py_both.h	2012-06-29 16:15:29.000000000 +0200
+***************
+*** 818,838 ****
+  
+      if (valObject == NULL)
+      {
+  	if (di == NULL)
+  	{
+  	    PyErr_SetString(PyExc_IndexError, _("no such key in dictionary"));
+  	    return -1;
+  	}
+! 	hashitem_T	*hi = hash_find(&d->dv_hashtab, di->di_key);
+  	hash_remove(&d->dv_hashtab, hi);
+  	dictitem_free(di);
+  	return 0;
+      }
+  
+      if (ConvertFromPyObject(valObject, &tv) == -1)
+-     {
+  	return -1;
+-     }
+  
+      if (di == NULL)
+      {
+--- 818,838 ----
+  
+      if (valObject == NULL)
+      {
++ 	hashitem_T	*hi;
++ 
+  	if (di == NULL)
+  	{
+  	    PyErr_SetString(PyExc_IndexError, _("no such key in dictionary"));
+  	    return -1;
+  	}
+! 	hi = hash_find(&d->dv_hashtab, di->di_key);
+  	hash_remove(&d->dv_hashtab, hi);
+  	dictitem_free(di);
+  	return 0;
+      }
+  
+      if (ConvertFromPyObject(valObject, &tv) == -1)
+  	return -1;
+  
+      if (di == NULL)
+      {
+*** ../vim-7.3.577/src/version.c	2012-06-29 15:51:26.000000000 +0200
+--- src/version.c	2012-06-29 16:18:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     578,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+77. The phone company asks you to test drive their new PBX system
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.579 b/source/ap/vim/patches/7.3.579
new file mode 100644
index 00000000..ed618fe7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.579
@@ -0,0 +1,232 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.579
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.579 (after 7.3.569)
+Problem:    Can't compile with Python 2.5.
+Solution:   Use PyCObject when Capsules are not available.
+Files:	    src/if_py_both.h, src/if_python.c, src/if_python3.c
+
+
+*** ../vim-7.3.578/src/if_py_both.h	2012-06-29 16:19:46.000000000 +0200
+--- src/if_py_both.h	2012-06-29 16:15:29.000000000 +0200
+***************
+*** 56,62 ****
+      /* name,	    function,		calling,    documentation */
+      {"write",	    OutputWrite,	1,	    ""},
+      {"writelines",  OutputWritelines,	1,	    ""},
+!     {"flush",       OutputFlush,        1,          ""},
+      { NULL,	    NULL,		0,	    NULL}
+  };
+  
+--- 56,62 ----
+      /* name,	    function,		calling,    documentation */
+      {"write",	    OutputWrite,	1,	    ""},
+      {"writelines",  OutputWritelines,	1,	    ""},
+!     {"flush",	    OutputFlush,	1,	    ""},
+      { NULL,	    NULL,		0,	    NULL}
+  };
+  
+***************
+*** 506,513 ****
+      /* name,	     function,		calling,    documentation */
+      {"command",	     VimCommand,	1,	    "Execute a Vim ex-mode command" },
+      {"eval",	     VimEval,		1,	    "Evaluate an expression using Vim evaluator" },
+!     {"bindeval",     VimEvalPy,         1,          "Like eval(), but returns objects attached to vim ones"},
+!     {"strwidth",     VimStrwidth,       1,          "Screen string width, counts <Tab> as having width 1"},
+      { NULL,	     NULL,		0,	    NULL }
+  };
+  
+--- 506,513 ----
+      /* name,	     function,		calling,    documentation */
+      {"command",	     VimCommand,	1,	    "Execute a Vim ex-mode command" },
+      {"eval",	     VimEval,		1,	    "Evaluate an expression using Vim evaluator" },
+!     {"bindeval",     VimEvalPy,		1,	    "Like eval(), but returns objects attached to vim ones"},
+!     {"strwidth",     VimStrwidth,	1,	    "Screen string width, counts <Tab> as having width 1"},
+      { NULL,	     NULL,		0,	    NULL }
+  };
+  
+***************
+*** 2432,2448 ****
+--- 2432,2463 ----
+  convert_dl(PyObject *obj, typval_T *tv,
+  				    pytotvfunc py_to_tv, PyObject *lookupDict)
+  {
++ # ifdef PY_USE_CAPSULE
+      PyObject	*capsule;
++ # else
++     PyCObject	*cobject;
++ # endif
+      char	hexBuf[sizeof(void *) * 2 + 3];
+  
+      sprintf(hexBuf, "%p", obj);
+  
++ # ifdef PY_USE_CAPSULE
+      capsule = PyDict_GetItemString(lookupDict, hexBuf);
+      if (capsule == NULL)
++ # else
++     cobject = (PyCObject *)PyDict_GetItemString(lookupDict, hexBuf);
++     if (cobject == NULL)
++ # endif
+      {
++ # ifdef PY_USE_CAPSULE
+  	capsule = PyCapsule_New(tv, NULL, NULL);
+  	PyDict_SetItemString(lookupDict, hexBuf, capsule);
+  	Py_DECREF(capsule);
++ # else
++ 	cobject = PyCObject_FromVoidPtr(tv, NULL);
++ 	PyDict_SetItemString(lookupDict, hexBuf, cobject);
++ 	Py_DECREF(cobject);
++ # endif
+  	if (py_to_tv(obj, tv, lookupDict) == -1)
+  	{
+  	    tv->v_type = VAR_UNKNOWN;
+***************
+*** 2458,2464 ****
+      }
+      else
+      {
+! 	typval_T	*v = PyCapsule_GetPointer(capsule, NULL);
+  	copy_tv(v, tv);
+      }
+      return 0;
+--- 2473,2485 ----
+      }
+      else
+      {
+! 	typval_T	*v;
+! 
+! # ifdef PY_USE_CAPSULE
+! 	v = PyCapsule_GetPointer(capsule, NULL);
+! # else
+! 	v = PyCObject_AsVoidPtr(cobject);
+! # endif
+  	copy_tv(v, tv);
+      }
+      return 0;
+*** ../vim-7.3.578/src/if_python.c	2012-06-29 12:54:32.000000000 +0200
+--- src/if_python.c	2012-06-29 16:17:44.000000000 +0200
+***************
+*** 71,76 ****
+--- 71,80 ----
+  # define PySequenceMethods Py_ssize_t
+  #endif
+  
++ #if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02070000
++ # define PY_USE_CAPSULE
++ #endif
++ 
+  #if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02050000
+  # define PyInt Py_ssize_t
+  # define PyInquiry lenfunc
+***************
+*** 220,227 ****
+  #  define PyObject_Malloc dll_PyObject_Malloc
+  #  define PyObject_Free dll_PyObject_Free
+  # endif
+! # define PyCapsule_New dll_PyCapsule_New
+! # define PyCapsule_GetPointer dll_PyCapsule_GetPointer
+  
+  /*
+   * Pointers for dynamic link
+--- 224,236 ----
+  #  define PyObject_Malloc dll_PyObject_Malloc
+  #  define PyObject_Free dll_PyObject_Free
+  # endif
+! # ifdef PY_USE_CAPSULE
+! #  define PyCapsule_New dll_PyCapsule_New
+! #  define PyCapsule_GetPointer dll_PyCapsule_GetPointer
+! # else
+! #  define PyCObject_FromVoidPtr dll_PyCObject_FromVoidPtr
+! #  define PyCObject_AsVoidPtr dll_PyCObject_AsVoidPtr
+! # endif
+  
+  /*
+   * Pointers for dynamic link
+***************
+*** 309,316 ****
+--- 318,330 ----
+  static void* (*dll_PyObject_Malloc)(size_t);
+  static void (*dll_PyObject_Free)(void*);
+  # endif
++ # ifdef PY_USE_CAPSULE
+  static PyObject* (*dll_PyCapsule_New)(void *, char *, PyCapsule_Destructor);
+  static void* (*dll_PyCapsule_GetPointer)(PyObject *, char *);
++ # else
++ static PyCObject* (*dll_PyCObject_FromVoidPtr)(void *cobj, void (*destr)(void *));
++ static void* (*dll_PyCObject_AsVoidPtr)(PyCObject *);
++ # endif
+  
+  static HINSTANCE hinstPython = 0; /* Instance of python.dll */
+  
+***************
+*** 403,409 ****
+      {"PyType_Ready", (PYTHON_PROC*)&dll_PyType_Ready},
+      {"Py_BuildValue", (PYTHON_PROC*)&dll_Py_BuildValue},
+      {"Py_FindMethod", (PYTHON_PROC*)&dll_Py_FindMethod},
+! # if (PY_VERSION_HEX >= 0x02050000) && SIZEOF_SIZE_T != SIZEOF_INT
+      {"Py_InitModule4_64", (PYTHON_PROC*)&dll_Py_InitModule4},
+  # else
+      {"Py_InitModule4", (PYTHON_PROC*)&dll_Py_InitModule4},
+--- 417,424 ----
+      {"PyType_Ready", (PYTHON_PROC*)&dll_PyType_Ready},
+      {"Py_BuildValue", (PYTHON_PROC*)&dll_Py_BuildValue},
+      {"Py_FindMethod", (PYTHON_PROC*)&dll_Py_FindMethod},
+! # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02050000 \
+! 	&& SIZEOF_SIZE_T != SIZEOF_INT
+      {"Py_InitModule4_64", (PYTHON_PROC*)&dll_Py_InitModule4},
+  # else
+      {"Py_InitModule4", (PYTHON_PROC*)&dll_Py_InitModule4},
+***************
+*** 424,431 ****
+--- 439,451 ----
+      {"PyObject_Malloc", (PYTHON_PROC*)&dll_PyObject_Malloc},
+      {"PyObject_Free", (PYTHON_PROC*)&dll_PyObject_Free},
+  # endif
++ # ifdef PY_USE_CAPSULE
+      {"PyCapsule_New", (PYTHON_PROC*)&dll_PyCapsule_New},
+      {"PyCapsule_GetPointer", (PYTHON_PROC*)&dll_PyCapsule_GetPointer},
++ # else
++     {"PyCObject_FromVoidPtr", (PYTHON_PROC*)&dll_PyCObject_FromVoidPtr},
++     {"PyCObject_AsVoidPtr", (PYTHON_PROC*)&dll_PyCObject_AsVoidPtr},
++ # endif
+      {"", NULL},
+  };
+  
+*** ../vim-7.3.578/src/if_python3.c	2012-06-29 12:54:32.000000000 +0200
+--- src/if_python3.c	2012-06-29 16:16:54.000000000 +0200
+***************
+*** 75,80 ****
+--- 75,83 ----
+  # define CODEC_ERROR_HANDLER NULL
+  #endif
+  
++ /* Python 3 does not support CObjects, always use Capsules */
++ #define PY_USE_CAPSULE
++ 
+  #define PyInt Py_ssize_t
+  #define PyString_Check(obj) PyUnicode_Check(obj)
+  #define PyString_AsBytes(obj) PyUnicode_AsEncodedString(obj, (char *)ENC_OPT, CODEC_ERROR_HANDLER)
+*** ../vim-7.3.578/src/version.c	2012-06-29 16:19:46.000000000 +0200
+--- src/version.c	2012-06-29 16:21:25.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     579,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+78. You find yourself dialing IP numbers on the phone.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.580 b/source/ap/vim/patches/7.3.580
new file mode 100644
index 00000000..c2c2a537
--- /dev/null
+++ b/source/ap/vim/patches/7.3.580
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.580
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.580
+Problem:    Warning on 64 bit MS-Windows.
+Solution:   Add type cast. (Mike Williams)
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.579/src/if_py_both.h	2012-06-29 16:28:23.000000000 +0200
+--- src/if_py_both.h	2012-06-29 17:49:59.000000000 +0200
+***************
+*** 495,501 ****
+      if (!PyArg_ParseTuple(args, "s", &expr))
+  	return NULL;
+  
+!     return PyLong_FromLong(mb_string2cells((char_u *)expr, STRLEN(expr)));
+  }
+  
+  /*
+--- 495,501 ----
+      if (!PyArg_ParseTuple(args, "s", &expr))
+  	return NULL;
+  
+!     return PyLong_FromLong(mb_string2cells((char_u *)expr, (int)STRLEN(expr)));
+  }
+  
+  /*
+*** ../vim-7.3.579/src/version.c	2012-06-29 16:28:23.000000000 +0200
+--- src/version.c	2012-06-29 17:50:36.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     580,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+79. All of your most erotic dreams have a scrollbar at the right side.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.581 b/source/ap/vim/patches/7.3.581
new file mode 100644
index 00000000..55300303
--- /dev/null
+++ b/source/ap/vim/patches/7.3.581
@@ -0,0 +1,117 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.581
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.581
+Problem:    Problems compiling with Python.
+Solution:   Pick UCS2 or UCS4 function at runtime. (lilydjwg)
+Files:	    src/if_python.c
+
+
+*** ../vim-7.3.580/src/if_python.c	2012-06-29 16:28:23.000000000 +0200
+--- src/if_python.c	2012-06-29 19:10:53.000000000 +0200
+***************
+*** 196,202 ****
+  # define PyString_Size dll_PyString_Size
+  # define PyString_Type (*dll_PyString_Type)
+  # define PyUnicode_Type (*dll_PyUnicode_Type)
+! # define PyUnicodeUCS4_AsEncodedString (*dll_PyUnicodeUCS4_AsEncodedString)
+  # define PyFloat_AsDouble dll_PyFloat_AsDouble
+  # define PyFloat_FromDouble dll_PyFloat_FromDouble
+  # define PyFloat_Type (*dll_PyFloat_Type)
+--- 196,203 ----
+  # define PyString_Size dll_PyString_Size
+  # define PyString_Type (*dll_PyString_Type)
+  # define PyUnicode_Type (*dll_PyUnicode_Type)
+! # undef PyUnicode_AsEncodedString
+! # define PyUnicode_AsEncodedString py_PyUnicode_AsEncodedString
+  # define PyFloat_AsDouble dll_PyFloat_AsDouble
+  # define PyFloat_FromDouble dll_PyFloat_FromDouble
+  # define PyFloat_Type (*dll_PyFloat_Type)
+***************
+*** 290,296 ****
+  static PyInt(*dll_PyString_Size)(PyObject *);
+  static PyTypeObject* dll_PyString_Type;
+  static PyTypeObject* dll_PyUnicode_Type;
+! static PyObject *(*PyUnicodeUCS4_AsEncodedString)(PyObject *, char *, char *);
+  static double(*dll_PyFloat_AsDouble)(PyObject *);
+  static PyObject*(*dll_PyFloat_FromDouble)(double);
+  static PyTypeObject* dll_PyFloat_Type;
+--- 291,297 ----
+  static PyInt(*dll_PyString_Size)(PyObject *);
+  static PyTypeObject* dll_PyString_Type;
+  static PyTypeObject* dll_PyUnicode_Type;
+! static PyObject *(*py_PyUnicode_AsEncodedString)(PyObject *, char *, char *);
+  static double(*dll_PyFloat_AsDouble)(PyObject *);
+  static PyObject*(*dll_PyFloat_FromDouble)(double);
+  static PyTypeObject* dll_PyFloat_Type;
+***************
+*** 406,412 ****
+      {"PyString_Size", (PYTHON_PROC*)&dll_PyString_Size},
+      {"PyString_Type", (PYTHON_PROC*)&dll_PyString_Type},
+      {"PyUnicode_Type", (PYTHON_PROC*)&dll_PyUnicode_Type},
+-     {"PyUnicodeUCS4_AsEncodedString", (PYTHON_PROC*)&dll_PyUnicodeUCS4_AsEncodedString},
+      {"PyFloat_Type", (PYTHON_PROC*)&dll_PyFloat_Type},
+      {"PyFloat_AsDouble", (PYTHON_PROC*)&dll_PyFloat_AsDouble},
+      {"PyFloat_FromDouble", (PYTHON_PROC*)&dll_PyFloat_FromDouble},
+--- 407,412 ----
+***************
+*** 471,476 ****
+--- 471,477 ----
+  python_runtime_link_init(char *libname, int verbose)
+  {
+      int i;
++     void *ucs_as_encoded_string;
+  
+  #if !(defined(PY_NO_RTLD_GLOBAL) && defined(PY3_NO_RTLD_GLOBAL)) && defined(UNIX) && defined(FEAT_PYTHON3)
+      /* Can't have Python and Python3 loaded at the same time.
+***************
+*** 506,511 ****
+--- 507,531 ----
+  	    return FAIL;
+  	}
+      }
++ 
++     /* Load unicode functions separately as only the ucs2 or the ucs4 functions
++      * will be present in the library. */
++     ucs_as_encoded_string = symbol_from_dll(hinstPython,
++ 					     "PyUnicodeUCS2_AsEncodedString");
++     if (ucs_as_encoded_string == NULL)
++ 	ucs_as_encoded_string = symbol_from_dll(hinstPython,
++ 					     "PyUnicodeUCS4_AsEncodedString");
++     if (ucs_as_encoded_string != NULL)
++ 	py_PyUnicode_AsEncodedString = ucs_as_encoded_string;
++     else
++     {
++ 	close_dll(hinstPython);
++ 	hinstPython = 0;
++ 	if (verbose)
++ 	    EMSG2(_(e_loadfunc), "PyUnicode_UCSX_*");
++ 	return FAIL;
++     }
++ 
+      return OK;
+  }
+  
+*** ../vim-7.3.580/src/version.c	2012-06-29 17:51:58.000000000 +0200
+--- src/version.c	2012-06-29 19:13:47.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     581,
+  /**/
+
+-- 
+ASCII stupid question, get a stupid ANSI.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.582 b/source/ap/vim/patches/7.3.582
new file mode 100644
index 00000000..4e118a7d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.582
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.582
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.582 (after 7.3.576)
+Problem:    Missing parts of the test OK file.
+Solution:   Add the missing parts.
+Files:	    src/testdir/test68.ok
+
+
+*** ../vim-7.3.581/src/testdir/test68.ok	2012-06-13 17:28:51.000000000 +0200
+--- src/testdir/test68.ok	2012-06-29 15:00:13.000000000 +0200
+***************
+*** 35,40 ****
+--- 35,48 ----
+  
+  
+  {
++   1 a
++     b
++ # 1 a
++ #   b
++ }
++ 
++ 
++ {
+  # 1 a
+  #   b
+  }
+***************
+*** 48,50 ****
+--- 56,62 ----
+  
+  { 1aa ^^2bb }
+  
++ 
++ # 1 xxxxx
++ #   foobar
++ 
+*** ../vim-7.3.581/src/version.c	2012-06-29 19:14:48.000000000 +0200
+--- src/version.c	2012-06-29 23:57:43.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     582,
+  /**/
+
+-- 
+If your nose runs, and your feet smell, you might be upside down.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.583 b/source/ap/vim/patches/7.3.583
new file mode 100644
index 00000000..2ea7f9d2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.583
@@ -0,0 +1,79 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.583
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.583
+Problem:    PyObject_NextNotImplemented is not defined before Python 2.7.
+	    (Danek Duvall)
+Solution:   Add #ifdefs.
+Files:	    src/if_python.c
+
+
+*** ../vim-7.3.582/src/if_python.c	2012-06-29 19:14:48.000000000 +0200
+--- src/if_python.c	2012-06-30 12:59:38.000000000 +0200
+***************
+*** 214,220 ****
+  # define Py_Finalize dll_Py_Finalize
+  # define Py_IsInitialized dll_Py_IsInitialized
+  # define _PyObject_New dll__PyObject_New
+! # define _PyObject_NextNotImplemented (*dll__PyObject_NextNotImplemented)
+  # define _Py_NoneStruct (*dll__Py_NoneStruct)
+  # define PyObject_Init dll__PyObject_Init
+  # define PyObject_GetIter dll_PyObject_GetIter
+--- 214,222 ----
+  # define Py_Finalize dll_Py_Finalize
+  # define Py_IsInitialized dll_Py_IsInitialized
+  # define _PyObject_New dll__PyObject_New
+! # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02070000
+! #  define _PyObject_NextNotImplemented (*dll__PyObject_NextNotImplemented)
+! # endif
+  # define _Py_NoneStruct (*dll__Py_NoneStruct)
+  # define PyObject_Init dll__PyObject_Init
+  # define PyObject_GetIter dll_PyObject_GetIter
+***************
+*** 310,316 ****
+--- 312,320 ----
+  static PyObject*(*dll__PyObject_New)(PyTypeObject *, PyObject *);
+  static PyObject*(*dll__PyObject_Init)(PyObject *, PyTypeObject *);
+  static PyObject* (*dll_PyObject_GetIter)(PyObject *);
++ # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02070000
+  static iternextfunc dll__PyObject_NextNotImplemented;
++ # endif
+  static PyObject* dll__Py_NoneStruct;
+  # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02020000
+  static int (*dll_PyType_IsSubtype)(PyTypeObject *, PyTypeObject *);
+***************
+*** 430,436 ****
+--- 434,442 ----
+      {"_PyObject_New", (PYTHON_PROC*)&dll__PyObject_New},
+      {"PyObject_Init", (PYTHON_PROC*)&dll__PyObject_Init},
+      {"PyObject_GetIter", (PYTHON_PROC*)&dll_PyObject_GetIter},
++ # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02070000
+      {"_PyObject_NextNotImplemented", (PYTHON_PROC*)&dll__PyObject_NextNotImplemented},
++ # endif
+      {"_Py_NoneStruct", (PYTHON_PROC*)&dll__Py_NoneStruct},
+  # if defined(PY_VERSION_HEX) && PY_VERSION_HEX >= 0x02020000
+      {"PyType_IsSubtype", (PYTHON_PROC*)&dll_PyType_IsSubtype},
+*** ../vim-7.3.582/src/version.c	2012-06-29 23:57:50.000000000 +0200
+--- src/version.c	2012-06-30 13:20:46.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     583,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+90. Instead of calling you to dinner, your spouse sends e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.584 b/source/ap/vim/patches/7.3.584
new file mode 100644
index 00000000..d7f1bdeb
--- /dev/null
+++ b/source/ap/vim/patches/7.3.584
@@ -0,0 +1,134 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.584
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.584
+Problem:    PyCObject is not always defined.
+Solution:   Use PyObject instead.
+Files:	    src/if_py_both.h, src/if_python.c
+
+
+*** ../vim-7.3.583/src/if_py_both.h	2012-06-29 17:51:58.000000000 +0200
+--- src/if_py_both.h	2012-06-30 13:25:24.000000000 +0200
+***************
+*** 2432,2463 ****
+  convert_dl(PyObject *obj, typval_T *tv,
+  				    pytotvfunc py_to_tv, PyObject *lookupDict)
+  {
+- # ifdef PY_USE_CAPSULE
+      PyObject	*capsule;
+- # else
+-     PyCObject	*cobject;
+- # endif
+      char	hexBuf[sizeof(void *) * 2 + 3];
+  
+      sprintf(hexBuf, "%p", obj);
+  
+  # ifdef PY_USE_CAPSULE
+      capsule = PyDict_GetItemString(lookupDict, hexBuf);
+-     if (capsule == NULL)
+  # else
+!     cobject = (PyCObject *)PyDict_GetItemString(lookupDict, hexBuf);
+!     if (cobject == NULL)
+  # endif
+      {
+  # ifdef PY_USE_CAPSULE
+  	capsule = PyCapsule_New(tv, NULL, NULL);
+- 	PyDict_SetItemString(lookupDict, hexBuf, capsule);
+- 	Py_DECREF(capsule);
+  # else
+! 	cobject = PyCObject_FromVoidPtr(tv, NULL);
+! 	PyDict_SetItemString(lookupDict, hexBuf, cobject);
+! 	Py_DECREF(cobject);
+  # endif
+  	if (py_to_tv(obj, tv, lookupDict) == -1)
+  	{
+  	    tv->v_type = VAR_UNKNOWN;
+--- 2432,2456 ----
+  convert_dl(PyObject *obj, typval_T *tv,
+  				    pytotvfunc py_to_tv, PyObject *lookupDict)
+  {
+      PyObject	*capsule;
+      char	hexBuf[sizeof(void *) * 2 + 3];
+  
+      sprintf(hexBuf, "%p", obj);
+  
+  # ifdef PY_USE_CAPSULE
+      capsule = PyDict_GetItemString(lookupDict, hexBuf);
+  # else
+!     capsule = (PyObject *)PyDict_GetItemString(lookupDict, hexBuf);
+  # endif
++     if (capsule == NULL)
+      {
+  # ifdef PY_USE_CAPSULE
+  	capsule = PyCapsule_New(tv, NULL, NULL);
+  # else
+! 	capsule = PyCObject_FromVoidPtr(tv, NULL);
+  # endif
++ 	PyDict_SetItemString(lookupDict, hexBuf, capsule);
++ 	Py_DECREF(capsule);
+  	if (py_to_tv(obj, tv, lookupDict) == -1)
+  	{
+  	    tv->v_type = VAR_UNKNOWN;
+***************
+*** 2478,2484 ****
+  # ifdef PY_USE_CAPSULE
+  	v = PyCapsule_GetPointer(capsule, NULL);
+  # else
+! 	v = PyCObject_AsVoidPtr(cobject);
+  # endif
+  	copy_tv(v, tv);
+      }
+--- 2471,2477 ----
+  # ifdef PY_USE_CAPSULE
+  	v = PyCapsule_GetPointer(capsule, NULL);
+  # else
+! 	v = PyCObject_AsVoidPtr(capsule);
+  # endif
+  	copy_tv(v, tv);
+      }
+*** ../vim-7.3.583/src/if_python.c	2012-06-30 13:21:03.000000000 +0200
+--- src/if_python.c	2012-06-30 13:23:22.000000000 +0200
+***************
+*** 327,334 ****
+  static PyObject* (*dll_PyCapsule_New)(void *, char *, PyCapsule_Destructor);
+  static void* (*dll_PyCapsule_GetPointer)(PyObject *, char *);
+  # else
+! static PyCObject* (*dll_PyCObject_FromVoidPtr)(void *cobj, void (*destr)(void *));
+! static void* (*dll_PyCObject_AsVoidPtr)(PyCObject *);
+  # endif
+  
+  static HINSTANCE hinstPython = 0; /* Instance of python.dll */
+--- 327,334 ----
+  static PyObject* (*dll_PyCapsule_New)(void *, char *, PyCapsule_Destructor);
+  static void* (*dll_PyCapsule_GetPointer)(PyObject *, char *);
+  # else
+! static PyObject* (*dll_PyCObject_FromVoidPtr)(void *cobj, void (*destr)(void *));
+! static void* (*dll_PyCObject_AsVoidPtr)(PyObject *);
+  # endif
+  
+  static HINSTANCE hinstPython = 0; /* Instance of python.dll */
+*** ../vim-7.3.583/src/version.c	2012-06-30 13:21:03.000000000 +0200
+--- src/version.c	2012-06-30 13:33:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     584,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+91. It's Saturday afternoon in the middle of May and you
+    are on computer.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.585 b/source/ap/vim/patches/7.3.585
new file mode 100644
index 00000000..6509780c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.585
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.585
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.585
+Problem:    Calling changed_bytes() too often.
+Solution:   Move changed_bytes() out of a loop. (Tor Perkins)
+Files:	    src/edit.c
+
+
+*** ../vim-7.3.584/src/edit.c	2012-06-29 15:04:34.000000000 +0200
+--- src/edit.c	2012-07-06 13:29:25.000000000 +0200
+***************
+*** 6350,6359 ****
+  			 * add the additional whitespace needed after the
+  			 * comment leader for the numbered list.  */
+  			for (i = 0; i < padding; i++)
+- 			{
+  			    ins_str((char_u *)" ");
+! 			    changed_bytes(curwin->w_cursor.lnum, leader_len);
+! 			}
+  		    }
+  		    else
+  		    {
+--- 6350,6357 ----
+  			 * add the additional whitespace needed after the
+  			 * comment leader for the numbered list.  */
+  			for (i = 0; i < padding; i++)
+  			    ins_str((char_u *)" ");
+! 			changed_bytes(curwin->w_cursor.lnum, leader_len);
+  		    }
+  		    else
+  		    {
+*** ../vim-7.3.584/src/version.c	2012-07-06 13:36:02.000000000 +0200
+--- src/version.c	2012-07-06 13:35:03.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     585,
+  /**/
+
+-- 
+From "know your smileys":
+ :'-D	Laughing so much that they're crying
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.586 b/source/ap/vim/patches/7.3.586
new file mode 100644
index 00000000..889ebd13
--- /dev/null
+++ b/source/ap/vim/patches/7.3.586
@@ -0,0 +1,103 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.586
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.586
+Problem:    When compiling with Cygwin or MingW MEMORYSTATUSEX is not defined.
+Solution:   Set the default for WINVER to 0x0500.
+Files:	    src/Make_ming.mak, src/Make_cyg.mak
+
+
+*** ../vim-7.3.585/src/Make_ming.mak	2012-04-20 16:13:21.000000000 +0200
+--- src/Make_ming.mak	2012-06-30 21:23:55.000000000 +0200
+***************
+*** 52,58 ****
+  OLE=no
+  # Set the default $(WINVER) to make it work with pre-Win2k
+  ifndef WINVER
+! WINVER = 0x0400
+  endif
+  # Set to yes to enable Cscope support
+  CSCOPE=yes
+--- 52,58 ----
+  OLE=no
+  # Set the default $(WINVER) to make it work with pre-Win2k
+  ifndef WINVER
+! WINVER = 0x0500
+  endif
+  # Set to yes to enable Cscope support
+  CSCOPE=yes
+*** ../vim-7.3.585/src/Make_cyg.mak	2011-09-30 16:56:00.000000000 +0200
+--- src/Make_cyg.mak	2012-06-30 21:23:42.000000000 +0200
+***************
+*** 1,6 ****
+  #
+  # Makefile for VIM on Win32, using Cygnus gcc
+! # Last updated by Dan Sharp.  Last Change: 2010 Nov 03
+  #
+  # Also read INSTALLpc.txt!
+  #
+--- 1,6 ----
+  #
+  # Makefile for VIM on Win32, using Cygnus gcc
+! # Last updated by Dan Sharp.  Last Change: 2012 Jun 30
+  #
+  # Also read INSTALLpc.txt!
+  #
+***************
+*** 48,54 ****
+  #		-L/lib/w32api to EXTRA_LIBS.
+  # POSTSCRIPT	no or yes: set to yes for PostScript printing (no)
+  # FEATURES	TINY, SMALL, NORMAL, BIG or HUGE (BIG)
+! # WINVER	Lowest Win32 version to support.  (0x0400)
+  # CSCOPE	no or yes: to include cscope interface support (yes)
+  # OPTIMIZE	SPACE, SPEED, or MAXSPEED: set optimization level (MAXSPEED)
+  # NETBEANS	no or yes: to include netbeans interface support (yes when GUI
+--- 48,54 ----
+  #		-L/lib/w32api to EXTRA_LIBS.
+  # POSTSCRIPT	no or yes: set to yes for PostScript printing (no)
+  # FEATURES	TINY, SMALL, NORMAL, BIG or HUGE (BIG)
+! # WINVER	Lowest Win32 version to support.  (0x0500)
+  # CSCOPE	no or yes: to include cscope interface support (yes)
+  # OPTIMIZE	SPACE, SPEED, or MAXSPEED: set optimization level (MAXSPEED)
+  # NETBEANS	no or yes: to include netbeans interface support (yes when GUI
+***************
+*** 85,91 ****
+  endif
+  
+  ifndef WINVER
+! WINVER = 0x0400
+  endif
+  
+  ifndef CSCOPE
+--- 85,91 ----
+  endif
+  
+  ifndef WINVER
+! WINVER = 0x0500
+  endif
+  
+  ifndef CSCOPE
+*** ../vim-7.3.585/src/version.c	2012-07-06 13:36:36.000000000 +0200
+--- src/version.c	2012-07-06 13:39:41.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     586,
+  /**/
+
+-- 
+From "know your smileys":
+ :-&	Eating spaghetti
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.587 b/source/ap/vim/patches/7.3.587
new file mode 100644
index 00000000..22252318
--- /dev/null
+++ b/source/ap/vim/patches/7.3.587
@@ -0,0 +1,84 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.587
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.587
+Problem:    Compiler warning for local var shadowing global var.
+Solution:   Rename the var and move it to an inner block. (Christian Brabandt)
+Files:	    src/buffer.c
+
+
+*** ../vim-7.3.586/src/buffer.c	2012-06-20 17:54:34.000000000 +0200
+--- src/buffer.c	2012-07-06 16:19:32.000000000 +0200
+***************
+*** 1363,1371 ****
+      int		action;
+  {
+      buf_T	*prevbuf;
+- #ifdef FEAT_WINDOWS
+-     win_T	*prevwin;
+- #endif
+      int		unload = (action == DOBUF_UNLOAD || action == DOBUF_DEL
+  						     || action == DOBUF_WIPE);
+  
+--- 1363,1368 ----
+***************
+*** 1406,1412 ****
+  #endif
+  	{
+  #ifdef FEAT_WINDOWS
+! 	    prevwin = curwin;
+  #endif
+  	    if (prevbuf == curbuf)
+  		u_sync(FALSE);
+--- 1403,1409 ----
+  #endif
+  	{
+  #ifdef FEAT_WINDOWS
+! 	    win_T  *previouswin = curwin;
+  #endif
+  	    if (prevbuf == curbuf)
+  		u_sync(FALSE);
+***************
+*** 1415,1423 ****
+  			&& !P_HID(prevbuf)
+  			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
+  #ifdef FEAT_WINDOWS
+! 	    if (curwin != prevwin && win_valid(prevwin))
+  	      /* autocommands changed curwin, Grr! */
+! 	      curwin = prevwin;
+  #endif
+  	}
+      }
+--- 1412,1420 ----
+  			&& !P_HID(prevbuf)
+  			&& !bufIsChanged(prevbuf)) ? DOBUF_UNLOAD : 0, FALSE);
+  #ifdef FEAT_WINDOWS
+! 	    if (curwin != previouswin && win_valid(previouswin))
+  	      /* autocommands changed curwin, Grr! */
+! 	      curwin = previouswin;
+  #endif
+  	}
+      }
+*** ../vim-7.3.586/src/version.c	2012-07-06 13:40:44.000000000 +0200
+--- src/version.c	2012-07-06 16:19:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     587,
+  /**/
+
+-- 
+There's no place like $(HOME)!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.588 b/source/ap/vim/patches/7.3.588
new file mode 100644
index 00000000..6dfabd07
--- /dev/null
+++ b/source/ap/vim/patches/7.3.588
@@ -0,0 +1,85 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.588
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.588
+Problem:    Crash on NULL pointer.
+Solution:   Fix the immediate problem by checking for NULL. (Lech Lorens)
+Files:	    src/window.c
+
+
+*** ../vim-7.3.587/src/window.c	2012-06-13 18:15:13.000000000 +0200
+--- src/window.c	2012-07-06 16:32:59.000000000 +0200
+***************
+*** 2184,2190 ****
+      }
+  
+  #ifdef FEAT_AUTOCMD
+!     if (win->w_closing || win->w_buffer->b_closing)
+  	return; /* window is already being closed */
+      if (win == aucmd_win)
+      {
+--- 2184,2190 ----
+      }
+  
+  #ifdef FEAT_AUTOCMD
+!     if (win->w_closing || (win->w_buffer != NULL && win->w_buffer->b_closing))
+  	return; /* window is already being closed */
+      if (win == aucmd_win)
+      {
+***************
+*** 3723,3729 ****
+  enter_tabpage(tp, old_curbuf, trigger_autocmds)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
+!     int         trigger_autocmds UNUSED;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+--- 3723,3729 ----
+  enter_tabpage(tp, old_curbuf, trigger_autocmds)
+      tabpage_T	*tp;
+      buf_T	*old_curbuf UNUSED;
+!     int		trigger_autocmds UNUSED;
+  {
+      int		old_off = tp->tp_firstwin->w_winrow;
+      win_T	*next_prevwin = tp->tp_prevwin;
+***************
+*** 3868,3874 ****
+      void
+  goto_tabpage_tp(tp, trigger_autocmds)
+      tabpage_T	*tp;
+!     int         trigger_autocmds;
+  {
+      /* Don't repeat a message in another tab page. */
+      set_keep_msg(NULL, 0);
+--- 3868,3874 ----
+      void
+  goto_tabpage_tp(tp, trigger_autocmds)
+      tabpage_T	*tp;
+!     int		trigger_autocmds;
+  {
+      /* Don't repeat a message in another tab page. */
+      set_keep_msg(NULL, 0);
+*** ../vim-7.3.587/src/version.c	2012-07-06 16:21:58.000000000 +0200
+--- src/version.c	2012-07-06 16:37:47.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     588,
+  /**/
+
+-- 
+Momento mori, ergo carpe diem
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.589 b/source/ap/vim/patches/7.3.589
new file mode 100644
index 00000000..fdda2b95
--- /dev/null
+++ b/source/ap/vim/patches/7.3.589
@@ -0,0 +1,69 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.589
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.589
+Problem:    Crash when $HOME is not set.
+Solution:   Check for a NULL pointer. (Chris Webb)
+Files:	    src/misc1.c
+
+
+*** ../vim-7.3.588/src/misc1.c	2012-06-29 15:04:34.000000000 +0200
+--- src/misc1.c	2012-07-06 16:44:39.000000000 +0200
+***************
+*** 4496,4503 ****
+  #else
+      homedir_env_orig = homedir_env = mch_getenv((char_u *)"HOME");
+  #endif
+  #if defined(FEAT_MODIFY_FNAME) || defined(WIN3264)
+!     if (vim_strchr(homedir_env, '~') != NULL)
+      {
+  	int	usedlen = 0;
+  	int	flen;
+--- 4496,4507 ----
+  #else
+      homedir_env_orig = homedir_env = mch_getenv((char_u *)"HOME");
+  #endif
++     /* Empty is the same as not set. */
++     if (homedir_env != NULL && *homedir_env == NUL)
++ 	homedir_env = NULL;
++ 
+  #if defined(FEAT_MODIFY_FNAME) || defined(WIN3264)
+!     if (homedir_env != NULL && vim_strchr(homedir_env, '~') != NULL)
+      {
+  	int	usedlen = 0;
+  	int	flen;
+***************
+*** 4513,4520 ****
+      }
+  #endif
+  
+-     if (homedir_env != NULL && *homedir_env == NUL)
+- 	homedir_env = NULL;
+      if (homedir_env != NULL)
+  	envlen = STRLEN(homedir_env);
+  
+--- 4517,4522 ----
+*** ../vim-7.3.588/src/version.c	2012-07-06 16:39:43.000000000 +0200
+--- src/version.c	2012-07-06 16:45:18.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     589,
+  /**/
+
+-- 
+I AM THANKFUL...
+...for the taxes that I pay because it means that I am employed.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.590 b/source/ap/vim/patches/7.3.590
new file mode 100644
index 00000000..4e524f79
--- /dev/null
+++ b/source/ap/vim/patches/7.3.590
@@ -0,0 +1,61 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.590
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.590
+Problem:    The '< and '> marks cannot be set directly.
+Solution:   Allow setting '< and '>. (Christian Brabandt)
+Files:	    src/mark.c
+
+
+*** ../vim-7.3.589/src/mark.c	2011-02-25 15:11:17.000000000 +0100
+--- src/mark.c	2012-07-06 17:47:23.000000000 +0200
+***************
+*** 98,103 ****
+--- 98,116 ----
+  	return OK;
+      }
+  
++ #ifdef FEAT_VISUAL
++     if (c == '<')
++     {
++ 	curbuf->b_visual.vi_start = *pos;
++ 	return OK;
++     }
++     if (c == '>')
++     {
++ 	curbuf->b_visual.vi_end = *pos;
++ 	return OK;
++     }
++ #endif
++ 
+  #ifndef EBCDIC
+      if (c > 'z')	    /* some islower() and isupper() cannot handle
+  				characters above 127 */
+*** ../vim-7.3.589/src/version.c	2012-07-06 16:49:37.000000000 +0200
+--- src/version.c	2012-07-06 17:49:00.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     590,
+  /**/
+
+-- 
+The primary purpose of the DATA statement is to give names to constants;
+instead of referring to pi as 3.141592653589793 at every appearance, the
+variable PI can be given that value with a DATA statement and used instead
+of the longer form of the constant.  This also simplifies modifying the
+program, should the value of pi change.
+	-- FORTRAN manual for Xerox Computers
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.591 b/source/ap/vim/patches/7.3.591
new file mode 100644
index 00000000..180fe608
--- /dev/null
+++ b/source/ap/vim/patches/7.3.591
@@ -0,0 +1,208 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.591
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.591
+Problem:    Can only move to a tab by absolute number.
+Solution:   Move a number of tabs to the left or the right. (Lech Lorens)
+Files:	    runtime/doc/tabpage.txt, src/ex_cmds.h, src/ex_docmd.c,
+	    src/testdir/test62.in, src/testdir/test62.ok, src/window.c
+
+
+*** ../vim-7.3.590/runtime/doc/tabpage.txt	2010-08-15 21:57:17.000000000 +0200
+--- runtime/doc/tabpage.txt	2012-07-06 18:10:06.000000000 +0200
+***************
+*** 173,182 ****
+--- 173,192 ----
+  REORDERING TAB PAGES:
+  
+  :tabm[ove] [N]						*:tabm* *:tabmove*
++ :[N]tabm[ove]
+  		Move the current tab page to after tab page N.  Use zero to
+  		make the current tab page the first one.  Without N the tab
+  		page is made the last one.
+  
++ :tabm[ove] +[N]
++ :tabm[ove] -[N]
++ 		Move the current tab page N places to the right (with +) or to
++ 		the left (with -).
++ 
++ Note that although it is possible to move a tab behind the N-th one by using
++ :Ntabmove, it is impossible to move it by N places by using :+Ntabmove. For
++ clarification what +N means in this context see |[range]|.
++ 
+  
+  LOOPING OVER TAB PAGES:
+  
+*** ../vim-7.3.590/src/ex_cmds.h	2012-05-18 18:47:11.000000000 +0200
+--- src/ex_cmds.h	2012-07-06 18:10:13.000000000 +0200
+***************
+*** 944,950 ****
+  EX(CMD_tabfirst,	"tabfirst",	ex_tabnext,
+  			TRLBAR),
+  EX(CMD_tabmove,		"tabmove",	ex_tabmove,
+! 			RANGE|NOTADR|ZEROR|COUNT|TRLBAR|ZEROR),
+  EX(CMD_tablast,		"tablast",	ex_tabnext,
+  			TRLBAR),
+  EX(CMD_tabnext,		"tabnext",	ex_tabnext,
+--- 944,950 ----
+  EX(CMD_tabfirst,	"tabfirst",	ex_tabnext,
+  			TRLBAR),
+  EX(CMD_tabmove,		"tabmove",	ex_tabmove,
+! 			RANGE|NOTADR|ZEROR|EXTRA|NOSPC|TRLBAR),
+  EX(CMD_tablast,		"tablast",	ex_tabnext,
+  			TRLBAR),
+  EX(CMD_tabnext,		"tabnext",	ex_tabnext,
+*** ../vim-7.3.590/src/ex_docmd.c	2012-06-06 19:02:40.000000000 +0200
+--- src/ex_docmd.c	2012-07-06 18:16:25.000000000 +0200
+***************
+*** 7478,7484 ****
+  ex_tabmove(eap)
+      exarg_T	*eap;
+  {
+!     tabpage_move(eap->addr_count == 0 ? 9999 : (int)eap->line2);
+  }
+  
+  /*
+--- 7478,7519 ----
+  ex_tabmove(eap)
+      exarg_T	*eap;
+  {
+!     int tab_number = 9999;
+! 
+!     if (eap->arg && *eap->arg != NUL)
+!     {
+! 	char_u *p = eap->arg;
+! 	int    relative = 0; /* argument +N/-N means: move N places to the
+! 			      * right/left relative to the current position. */
+! 
+! 	if (*eap->arg == '-')
+! 	{
+! 	    relative = -1;
+! 	    p = eap->arg + 1;
+! 	}
+! 	else if (*eap->arg == '+')
+! 	{
+! 	    relative = 1;
+! 	    p = eap->arg + 1;
+! 	}
+! 	else
+! 	    p = eap->arg;
+! 
+! 	if (p == skipdigits(p))
+! 	{
+! 	    /* No numbers as argument. */
+! 	    eap->errmsg = e_invarg;
+! 	    return;
+! 	}
+! 
+! 	tab_number = getdigits(&p);
+! 	if (relative != 0)
+! 	    tab_number = tab_number * relative + tabpage_index(curtab) - 1;;
+!     }
+!     else if (eap->addr_count != 0)
+! 	tab_number = eap->line2;
+! 
+!     tabpage_move(tab_number);
+  }
+  
+  /*
+*** ../vim-7.3.590/src/testdir/test62.in	2012-03-07 22:55:17.000000000 +0100
+--- src/testdir/test62.in	2012-07-06 18:10:13.000000000 +0200
+***************
+*** 93,98 ****
+--- 93,126 ----
+  :endif
+  :"
+  :"
++ :for i in range(9) | tabnew | endfor
++ 1gt
++ Go=tabpagenr()


++ :tabmove 5
++ i=tabpagenr()


++ :tabmove -2
++ i=tabpagenr()


++ :tabmove +4
++ i=tabpagenr()


++ :tabmove
++ i=tabpagenr()


++ :tabmove -20
++ i=tabpagenr()


++ :tabmove +20
++ i=tabpagenr()


++ :3tabmove
++ i=tabpagenr()


++ :7tabmove 5
++ i=tabpagenr()


++ :let a='No error caught.'
++ :try
++ :tabmove foo
++ :catch E474
++ :let a='E474 caught.'
++ :endtry
++ i=a

++ :"
++ :"
+  :/^Results/,$w! test.out
+  :qa!
+  ENDTEST
+*** ../vim-7.3.590/src/testdir/test62.ok	2012-02-22 19:13:00.000000000 +0100
+--- src/testdir/test62.ok	2012-07-06 18:10:13.000000000 +0200
+***************
+*** 8,10 ****
+--- 8,20 ----
+  tab drop 1: pass
+  tab drop 2: pass
+  tab drop 3: pass
++ 1
++ 6
++ 4
++ 8
++ 10
++ 1
++ 10
++ 4
++ 6
++ E474 caught.
+*** ../vim-7.3.590/src/window.c	2012-07-06 16:39:43.000000000 +0200
+--- src/window.c	2012-07-06 18:10:13.000000000 +0200
+***************
+*** 3929,3935 ****
+      }
+  
+      /* Re-insert it at the specified position. */
+!     if (n == 0)
+      {
+  	curtab->tp_next = first_tabpage;
+  	first_tabpage = curtab;
+--- 3929,3935 ----
+      }
+  
+      /* Re-insert it at the specified position. */
+!     if (n <= 0)
+      {
+  	curtab->tp_next = first_tabpage;
+  	first_tabpage = curtab;
+*** ../vim-7.3.590/src/version.c	2012-07-06 17:51:24.000000000 +0200
+--- src/version.c	2012-07-06 18:11:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     591,
+  /**/
+
+-- 
+Bare feet magnetize sharp metal objects so they point upward from the
+floor -- especially in the dark.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.592 b/source/ap/vim/patches/7.3.592
new file mode 100644
index 00000000..be13ef74
--- /dev/null
+++ b/source/ap/vim/patches/7.3.592
@@ -0,0 +1,126 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.592
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.592
+Problem:    Vim on GTK does not support g:browsefilter.
+Solution:   Add a GtkFileFilter to the file chooser. (Christian Brabandt)
+Files:	    src/gui_gtk.c
+
+
+*** ../vim-7.3.591/src/gui_gtk.c	2012-06-06 16:14:36.000000000 +0200
+--- src/gui_gtk.c	2012-07-10 13:08:06.000000000 +0200
+***************
+*** 840,846 ****
+  	       char_u *dflt,
+  	       char_u *ext UNUSED,
+  	       char_u *initdir,
+! 	       char_u *filter UNUSED)
+  {
+  #ifdef USE_FILE_CHOOSER
+      GtkWidget		*fc;
+--- 840,846 ----
+  	       char_u *dflt,
+  	       char_u *ext UNUSED,
+  	       char_u *initdir,
+! 	       char_u *filter)
+  {
+  #ifdef USE_FILE_CHOOSER
+      GtkWidget		*fc;
+***************
+*** 848,853 ****
+--- 848,854 ----
+      char_u		dirbuf[MAXPATHL];
+      guint		log_handler;
+      const gchar		*domain = "Gtk";
++     GtkFileFilter	*gfilter;
+  
+      title = CONVERT_TO_UTF8(title);
+  
+***************
+*** 879,884 ****
+--- 880,924 ----
+  	    NULL);
+      gtk_file_chooser_set_current_folder(GTK_FILE_CHOOSER(fc),
+  						       (const gchar *)dirbuf);
++ 
++     if (filter != NULL && *filter != NUL)
++     {
++ 	int     i = 0;
++ 	char_u  *patt;
++ 	char_u  *p = filter;
++ 
++ 	gfilter = gtk_file_filter_new();
++ 	patt = alloc(STRLEN(filter));
++ 	while (p != NULL && *p != NUL)
++ 	{
++ 	    if (*p == '\n' || *p == ';' || *p == '\t')
++ 	    {
++ 		STRNCPY(patt, filter, i);
++ 		patt[i] = '\0';
++ 		if (*p == '\t')
++ 		    gtk_file_filter_set_name(gfilter, (gchar *)patt);
++ 		else
++ 		{
++ 		    gtk_file_filter_add_pattern(gfilter, (gchar *)patt);
++ 		    if (*p == '\n')
++ 		    {
++ 			gtk_file_chooser_add_filter((GtkFileChooser *)fc,
++ 								     gfilter);
++ 			if (*(p + 1) != NUL)
++ 			    gfilter = gtk_file_filter_new();
++ 		    }
++ 		}
++ 		filter = ++p;
++ 		i = 0;
++ 	    }
++ 	    else
++ 	    {
++ 		p++;
++ 		i++;
++ 	    }
++ 	}
++ 	vim_free(patt);
++     }
+      if (saving && dflt != NULL && *dflt != NUL)
+  	gtk_file_chooser_set_current_name(GTK_FILE_CHOOSER(fc), (char *)dflt);
+  
+***************
+*** 1304,1310 ****
+  	gtk_widget_show(entry);
+  
+  	/* Make Enter work like pressing OK. */
+!         gtk_entry_set_activates_default(GTK_ENTRY(entry), TRUE);
+  
+  	text = CONVERT_TO_UTF8(textfield);
+  	gtk_entry_set_text(GTK_ENTRY(entry), (const char *)text);
+--- 1344,1350 ----
+  	gtk_widget_show(entry);
+  
+  	/* Make Enter work like pressing OK. */
+! 	gtk_entry_set_activates_default(GTK_ENTRY(entry), TRUE);
+  
+  	text = CONVERT_TO_UTF8(textfield);
+  	gtk_entry_set_text(GTK_ENTRY(entry), (const char *)text);
+*** ../vim-7.3.591/src/version.c	2012-07-06 18:27:34.000000000 +0200
+--- src/version.c	2012-07-10 13:00:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     592,
+  /**/
+
+-- 
+To be rich is not the end, but only a change of worries.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.593 b/source/ap/vim/patches/7.3.593
new file mode 100644
index 00000000..b8f26748
--- /dev/null
+++ b/source/ap/vim/patches/7.3.593
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.593
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.593
+Problem:    No easy way to decide if b:browsefilter will work.
+Solution:   Add the browsefilter feature.
+Files:	    src/gui_gtk.c, src/eval.c, src/vim.h
+
+
+*** ../vim-7.3.592/src/gui_gtk.c	2012-07-10 13:12:46.000000000 +0200
+--- src/gui_gtk.c	2012-07-10 13:40:38.000000000 +0200
+***************
+*** 779,787 ****
+  /*
+   * Implementation of the file selector related stuff
+   */
+- #if GTK_CHECK_VERSION(2,4,0)
+- # define USE_FILE_CHOOSER
+- #endif
+  
+  #ifndef USE_FILE_CHOOSER
+      static void
+--- 779,784 ----
+*** ../vim-7.3.592/src/eval.c	2012-06-29 12:54:32.000000000 +0200
+--- src/eval.c	2012-07-10 13:34:10.000000000 +0200
+***************
+*** 12044,12049 ****
+--- 12044,12054 ----
+  	"all_builtin_terms",
+  # endif
+  #endif
++ #if defined(FEAT_BROWSE) && (defined(USE_FILE_CHOOSER) \
++ 	|| defined(FEAT_GUI_W32) \
++ 	|| defined(FEAT_GUI_MOTIF))
++ 	"browsefilter",
++ #endif
+  #ifdef FEAT_BYTEOFF
+  	"byte_offset",
+  #endif
+*** ../vim-7.3.592/src/vim.h	2012-06-13 17:28:51.000000000 +0200
+--- src/vim.h	2012-07-10 13:30:44.000000000 +0200
+***************
+*** 2125,2130 ****
+--- 2125,2136 ----
+  # endif
+  #endif
+  
++ #if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION)
++ # if GTK_CHECK_VERSION(2,4,0)
++ #  define USE_FILE_CHOOSER
++ # endif
++ #endif
++ 
+  #ifndef FEAT_NETBEANS_INTG
+  # undef NBDEBUG
+  #endif
+*** ../vim-7.3.592/src/version.c	2012-07-10 13:12:46.000000000 +0200
+--- src/version.c	2012-07-10 13:34:50.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     593,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+102. When filling out your driver's license application, you give
+     your IP address.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.594 b/source/ap/vim/patches/7.3.594
new file mode 100644
index 00000000..3f7d3b26
--- /dev/null
+++ b/source/ap/vim/patches/7.3.594
@@ -0,0 +1,171 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.594
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.594
+Problem:    The X command server doesn't work perfectly. It sends an empty
+	    reply for as-keys requests.
+Solution:   Remove duplicate ga_init2(). Do not send a reply for as-keys
+	    requests. (Brian Burns)
+Files:	    src/if_xcmdsrv.c
+
+
+*** ../vim-7.3.593/src/if_xcmdsrv.c	2010-08-15 21:57:27.000000000 +0200
+--- src/if_xcmdsrv.c	2012-07-10 14:15:59.000000000 +0200
+***************
+*** 655,661 ****
+  	if (SendInit(dpy) < 0)
+  	    return NULL;
+      }
+-     ga_init2(&ga, 1, 100);
+  
+      /*
+       * Read the registry property.
+--- 655,660 ----
+***************
+*** 1198,1206 ****
+  	if ((*p == 'c' || *p == 'k') && (p[1] == 0))
+  	{
+  	    Window	resWindow;
+! 	    char_u	*name, *script, *serial, *end, *res;
+  	    Bool	asKeys = *p == 'k';
+- 	    garray_T	reply;
+  	    char_u	*enc;
+  
+  	    /*
+--- 1197,1204 ----
+  	if ((*p == 'c' || *p == 'k') && (p[1] == 0))
+  	{
+  	    Window	resWindow;
+! 	    char_u	*name, *script, *serial, *end;
+  	    Bool	asKeys = *p == 'k';
+  	    char_u	*enc;
+  
+  	    /*
+***************
+*** 1256,1305 ****
+  	    if (script == NULL || name == NULL)
+  		continue;
+  
+! 	    /*
+! 	     * Initialize the result property, so that we're ready at any
+! 	     * time if we need to return an error.
+! 	     */
+! 	    if (resWindow != None)
+! 	    {
+! 		ga_init2(&reply, 1, 100);
+  #ifdef FEAT_MBYTE
+! 		ga_grow(&reply, 50 + STRLEN(p_enc));
+! 		sprintf(reply.ga_data, "%cr%c-E %s%c-s %s%c-r ",
+  						   0, 0, p_enc, 0, serial, 0);
+! 		reply.ga_len = 14 + STRLEN(p_enc) + STRLEN(serial);
+  #else
+! 		ga_grow(&reply, 50);
+! 		sprintf(reply.ga_data, "%cr%c-s %s%c-r ", 0, 0, serial, 0);
+! 		reply.ga_len = 10 + STRLEN(serial);
+  #endif
+! 	    }
+! 	    res = NULL;
+! 	    if (serverName != NULL && STRICMP(name, serverName) == 0)
+! 	    {
+! 		script = serverConvert(enc, script, &tofree);
+! 		if (asKeys)
+! 		    server_to_input_buf(script);
+! 		else
+! 		    res = eval_client_expr_to_string(script);
+! 		vim_free(tofree);
+! 	    }
+! 	    if (resWindow != None)
+! 	    {
+! 		if (res != NULL)
+! 		    ga_concat(&reply, res);
+! 		else if (asKeys == 0)
+! 		{
+! 		    ga_concat(&reply, (char_u *)_(e_invexprmsg));
+! 		    ga_append(&reply, 0);
+! 		    ga_concat(&reply, (char_u *)"-c 1");
+! 		}
+! 		ga_append(&reply, NUL);
+! 		(void)AppendPropCarefully(dpy, resWindow, commProperty,
+! 					   reply.ga_data, reply.ga_len);
+! 		ga_clear(&reply);
+! 	    }
+! 	    vim_free(res);
+  	}
+  	else if (*p == 'r' && p[1] == 0)
+  	{
+--- 1254,1305 ----
+  	    if (script == NULL || name == NULL)
+  		continue;
+  
+!             if (serverName != NULL && STRICMP(name, serverName) == 0)
+!             {
+!                 script = serverConvert(enc, script, &tofree);
+!                 if (asKeys)
+!                     server_to_input_buf(script);
+!                 else
+!                 {
+!                     char_u      *res;
+! 
+!                     res = eval_client_expr_to_string(script);
+! 		    if (resWindow != None)
+! 		    {
+! 			garray_T    reply;
+! 
+! 			/* Initialize the result property. */
+! 			ga_init2(&reply, 1, 100);
+  #ifdef FEAT_MBYTE
+! 			ga_grow(&reply, 50 + STRLEN(p_enc));
+! 			sprintf(reply.ga_data, "%cr%c-E %s%c-s %s%c-r ",
+  						   0, 0, p_enc, 0, serial, 0);
+! 			reply.ga_len = 14 + STRLEN(p_enc) + STRLEN(serial);
+  #else
+! 			ga_grow(&reply, 50);
+! 			sprintf(reply.ga_data, "%cr%c-s %s%c-r ",
+! 							     0, 0, serial, 0);
+! 			reply.ga_len = 10 + STRLEN(serial);
+  #endif
+! 
+! 			/* Evaluate the expression and return the result. */
+! 			if (res != NULL)
+! 			    ga_concat(&reply, res);
+! 			else
+! 			{
+! 			    ga_concat(&reply, (char_u *)_(e_invexprmsg));
+! 			    ga_append(&reply, 0);
+! 			    ga_concat(&reply, (char_u *)"-c 1");
+! 			}
+! 			ga_append(&reply, NUL);
+! 			(void)AppendPropCarefully(dpy, resWindow, commProperty,
+! 						 reply.ga_data, reply.ga_len);
+! 			ga_clear(&reply);
+! 		    }
+!                     vim_free(res);
+!                 }
+!                 vim_free(tofree);
+!             }
+  	}
+  	else if (*p == 'r' && p[1] == 0)
+  	{
+*** ../vim-7.3.593/src/version.c	2012-07-10 13:41:09.000000000 +0200
+--- src/version.c	2012-07-10 14:17:50.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     594,
+  /**/
+
+-- 
+A meeting is an event at which the minutes are kept and the hours are lost.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.595 b/source/ap/vim/patches/7.3.595
new file mode 100644
index 00000000..0fc9b522
--- /dev/null
+++ b/source/ap/vim/patches/7.3.595
@@ -0,0 +1,154 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.595
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.595
+Problem:    The X command server responds slowly
+Solution:   Change the loop that waits for replies. (Brian Burns)
+Files:	    src/if_xcmdsrv.c
+
+
+*** ../vim-7.3.594/src/if_xcmdsrv.c	2012-07-10 14:25:00.000000000 +0200
+--- src/if_xcmdsrv.c	2012-07-10 14:44:13.000000000 +0200
+***************
+*** 572,632 ****
+  {
+      time_t	    start;
+      time_t	    now;
+-     time_t	    lastChk = 0;
+      XEvent	    event;
+!     XPropertyEvent *e = (XPropertyEvent *)&event;
+! #   define SEND_MSEC_POLL 50
+  
+      time(&start);
+!     while (endCond(endData) == 0)
+      {
+  	time(&now);
+  	if (seconds >= 0 && (now - start) >= seconds)
+  	    break;
+! 	if (now != lastChk)
+! 	{
+! 	    lastChk = now;
+! 	    if (!WindowValid(dpy, w))
+! 		break;
+! 	    /*
+! 	     * Sometimes the PropertyChange event doesn't come.
+! 	     * This can be seen in eg: vim -c 'echo remote_expr("gvim", "3+2")'
+! 	     */
+! 	    serverEventProc(dpy, NULL);
+! 	}
+  	if (localLoop)
+  	{
+- 	    /* Just look out for the answer without calling back into Vim */
+  #ifndef HAVE_SELECT
+- 	    struct pollfd   fds;
+- 
+- 	    fds.fd = ConnectionNumber(dpy);
+- 	    fds.events = POLLIN;
+  	    if (poll(&fds, 1, SEND_MSEC_POLL) < 0)
+  		break;
+  #else
+! 	    fd_set	    fds;
+! 	    struct timeval  tv;
+! 
+! 	    tv.tv_sec = 0;
+! 	    tv.tv_usec =  SEND_MSEC_POLL * 1000;
+! 	    FD_ZERO(&fds);
+! 	    FD_SET(ConnectionNumber(dpy), &fds);
+! 	    if (select(ConnectionNumber(dpy) + 1, &fds, NULL, NULL, &tv) < 0)
+  		break;
+  #endif
+- 	    while (XEventsQueued(dpy, QueuedAfterReading) > 0)
+- 	    {
+- 		XNextEvent(dpy, &event);
+- 		if (event.type == PropertyNotify && e->window == commWindow)
+- 		    serverEventProc(dpy, &event);
+- 	    }
+  	}
+  	else
+  	{
+  	    if (got_int)
+  		break;
+! 	    ui_delay((long)SEND_MSEC_POLL, TRUE);
+  	    ui_breakcheck();
+  	}
+      }
+--- 572,626 ----
+  {
+      time_t	    start;
+      time_t	    now;
+      XEvent	    event;
+! 
+! #define UI_MSEC_DELAY 50
+! #define SEND_MSEC_POLL 500
+! #ifndef HAVE_SELECT
+!     struct pollfd   fds;
+! 
+!     fds.fd = ConnectionNumber(dpy);
+!     fds.events = POLLIN;
+! #else
+!     fd_set	    fds;
+!     struct timeval  tv;
+! 
+!     tv.tv_sec = 0;
+!     tv.tv_usec =  SEND_MSEC_POLL * 1000;
+!     FD_ZERO(&fds);
+!     FD_SET(ConnectionNumber(dpy), &fds);
+! #endif
+  
+      time(&start);
+!     while (TRUE)
+      {
++ 	while (XCheckWindowEvent(dpy, commWindow, PropertyChangeMask, &event))
++ 	    serverEventProc(dpy, &event);
++ 
++ 	if (endCond(endData) != 0)
++ 	    break;
++ 	if (!WindowValid(dpy, w))
++ 	    break;
+  	time(&now);
+  	if (seconds >= 0 && (now - start) >= seconds)
+  	    break;
+! 
+! 	/* Just look out for the answer without calling back into Vim */
+  	if (localLoop)
+  	{
+  #ifndef HAVE_SELECT
+  	    if (poll(&fds, 1, SEND_MSEC_POLL) < 0)
+  		break;
+  #else
+! 	    if (select(FD_SETSIZE, &fds, NULL, NULL, &tv) < 0)
+  		break;
+  #endif
+  	}
+  	else
+  	{
+  	    if (got_int)
+  		break;
+! 	    ui_delay((long)UI_MSEC_DELAY, TRUE);
+  	    ui_breakcheck();
+  	}
+      }
+*** ../vim-7.3.594/src/version.c	2012-07-10 14:25:00.000000000 +0200
+--- src/version.c	2012-07-10 14:52:16.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     595,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+104. When people ask about the Presidential Election you ask "Which country?"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.596 b/source/ap/vim/patches/7.3.596
new file mode 100644
index 00000000..59513b2b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.596
@@ -0,0 +1,171 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.596
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.596
+Problem:    Can't remove all signs for a file or buffer.
+Solution:   Support "*" for the sign id. (Christian Brabandt)
+Files:	    runtime/doc/sign.txt, src/buffer.c, src/ex_cmds.c,
+	    src/proto/buffer.pro
+
+
+*** ../vim-7.3.595/runtime/doc/sign.txt	2010-08-15 21:57:17.000000000 +0200
+--- runtime/doc/sign.txt	2012-07-10 15:05:19.000000000 +0200
+***************
+*** 150,157 ****
+  		Remove the previously placed sign {id} from file {fname}.
+  		See remark above about {fname} |:sign-fname|.
+  
+  :sign unplace {id} buffer={nr}
+! 		Same, but use buffer {nr}.
+  
+  :sign unplace {id}
+  		Remove the previously placed sign {id} from all files it
+--- 153,166 ----
+  		Remove the previously placed sign {id} from file {fname}.
+  		See remark above about {fname} |:sign-fname|.
+  
++ :sign unplace * file={fname}
++ 		Remove all placed signs in file {fname}.
++ 
+  :sign unplace {id} buffer={nr}
+! 		Remove the previously placed sign {id} from buffer {nr}.
+! 
+! :sign unplace * buffer={nr}
+! 		Remove all placed signs in buffer {nr}.
+  
+  :sign unplace {id}
+  		Remove the previously placed sign {id} from all files it
+*** ../vim-7.3.595/src/buffer.c	2012-07-06 16:21:58.000000000 +0200
+--- src/buffer.c	2012-07-10 15:06:05.000000000 +0200
+***************
+*** 57,63 ****
+  
+  #if defined(FEAT_SIGNS)
+  static void insert_sign __ARGS((buf_T *buf, signlist_T *prev, signlist_T *next, int id, linenr_T lnum, int typenr));
+- static void buf_delete_signs __ARGS((buf_T *buf));
+  #endif
+  
+  #if defined(FEAT_WINDOWS) && defined(FEAT_QUICKFIX)
+--- 57,62 ----
+***************
+*** 5537,5543 ****
+  /*
+   * Delete signs in buffer "buf".
+   */
+!     static void
+  buf_delete_signs(buf)
+      buf_T	*buf;
+  {
+--- 5536,5542 ----
+  /*
+   * Delete signs in buffer "buf".
+   */
+!     void
+  buf_delete_signs(buf)
+      buf_T	*buf;
+  {
+*** ../vim-7.3.595/src/ex_cmds.c	2012-05-18 16:24:06.000000000 +0200
+--- src/ex_cmds.c	2012-07-10 15:14:22.000000000 +0200
+***************
+*** 6997,7002 ****
+--- 6997,7012 ----
+  		lnum = atoi((char *)arg);
+  		arg = skiptowhite(arg);
+  	    }
++ 	    else if (STRNCMP(arg, "*", 1) == 0 && idx == SIGNCMD_UNPLACE)
++ 	    {
++ 		if (id != -1)
++ 		{
++ 		    EMSG(_(e_invarg));
++ 		    return;
++ 		}
++ 		id = -2;
++ 		arg = skiptowhite(arg + 1);
++ 	    }
+  	    else if (STRNCMP(arg, "name=", 5) == 0)
+  	    {
+  		arg += 5;
+***************
+*** 7033,7039 ****
+  	{
+  	    EMSG2(_("E158: Invalid buffer name: %s"), arg);
+  	}
+! 	else if (id <= 0)
+  	{
+  	    if (lnum >= 0 || sign_name != NULL)
+  		EMSG(_(e_invarg));
+--- 7043,7049 ----
+  	{
+  	    EMSG2(_("E158: Invalid buffer name: %s"), arg);
+  	}
+! 	else if (id <= 0 && !(idx == SIGNCMD_UNPLACE && id == -2))
+  	{
+  	    if (lnum >= 0 || sign_name != NULL)
+  		EMSG(_(e_invarg));
+***************
+*** 7074,7084 ****
+  	}
+  	else if (idx == SIGNCMD_UNPLACE)
+  	{
+- 	    /* ":sign unplace {id} file={fname}" */
+  	    if (lnum >= 0 || sign_name != NULL)
+  		EMSG(_(e_invarg));
+  	    else
+  	    {
+  		lnum = buf_delsign(buf, id);
+  		update_debug_sign(buf, lnum);
+  	    }
+--- 7084,7100 ----
+  	}
+  	else if (idx == SIGNCMD_UNPLACE)
+  	{
+  	    if (lnum >= 0 || sign_name != NULL)
+  		EMSG(_(e_invarg));
++ 	    else if (id == -2)
++ 	    {
++ 		/* ":sign unplace * file={fname}" */
++ 		redraw_buf_later(buf, NOT_VALID);
++ 		buf_delete_signs(buf);
++ 	    }
+  	    else
+  	    {
++ 		/* ":sign unplace {id} file={fname}" */
+  		lnum = buf_delsign(buf, id);
+  		update_debug_sign(buf, lnum);
+  	    }
+*** ../vim-7.3.595/src/proto/buffer.pro	2012-02-22 14:58:24.000000000 +0100
+--- src/proto/buffer.pro	2012-07-10 15:06:10.000000000 +0200
+***************
+*** 60,65 ****
+--- 60,66 ----
+  int buf_findsign_id __ARGS((buf_T *buf, linenr_T lnum));
+  int buf_findsigntype_id __ARGS((buf_T *buf, linenr_T lnum, int typenr));
+  int buf_signcount __ARGS((buf_T *buf, linenr_T lnum));
++ void buf_delete_signs __ARGS((buf_T *buf));
+  void buf_delete_all_signs __ARGS((void));
+  void sign_list_placed __ARGS((buf_T *rbuf));
+  void sign_mark_adjust __ARGS((linenr_T line1, linenr_T line2, long amount, long amount_after));
+*** ../vim-7.3.595/src/version.c	2012-07-10 14:56:42.000000000 +0200
+--- src/version.c	2012-07-10 15:16:40.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     596,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+105. When someone asks you for your address, you tell them your URL.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.597 b/source/ap/vim/patches/7.3.597
new file mode 100644
index 00000000..2a4f0b3d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.597
@@ -0,0 +1,720 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.597
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.597
+Problem:    'clipboard' "autoselect" only applies to the * register. (Sergey
+	    Vakulenko)
+Solution:   Make 'autoselect' work for the + register. (Christian Brabant)
+	    Add the "autoselectplus" option in 'clipboard' and the "P" flag in
+	    'guioptions'.
+Files:	    runtime/doc/options.txt, src/normal.c, src/ops.c, src/screen.c,
+	    src/ui.c, src/globals.h, src/proto/ui.pro, src/option.h, src/gui.c
+
+
+*** ../vim-7.3.596/runtime/doc/options.txt	2012-02-20 22:18:23.000000000 +0100
+--- runtime/doc/options.txt	2012-07-10 15:40:35.000000000 +0200
+***************
+*** 1437,1442 ****
+--- 1452,1458 ----
+  	This option is a list of comma separated names.
+  	These names are recognized:
+  
++ 						*clipboard-unnamed*
+  	unnamed		When included, Vim will use the clipboard register '*'
+  			for all yank, delete, change and put operations which
+  			would normally go to the unnamed register.  When a
+***************
+*** 1446,1460 ****
+  			explicitly accessed using the "* notation.  Also see
+  			|gui-clipboard|.
+  
+  	unnamedplus	A variant of "unnamed" flag which uses the clipboard
+  			register '+' (|quoteplus|) instead of register '*' for
+  			all operations except yank.  Yank shall copy the text
+  			into register '+' and also into '*' when "unnamed" is
+  			included.
+! 			Only available with the |+x11| feature.
+  			Availability can be checked with: >
+  				if has('unnamedplus')
+  <
+  	autoselect	Works like the 'a' flag in 'guioptions': If present,
+  			then whenever Visual mode is started, or the Visual
+  			area extended, Vim tries to become the owner of the
+--- 1462,1478 ----
+  			explicitly accessed using the "* notation.  Also see
+  			|gui-clipboard|.
+  
++ 						*clipboard-unnamedplus*
+  	unnamedplus	A variant of "unnamed" flag which uses the clipboard
+  			register '+' (|quoteplus|) instead of register '*' for
+  			all operations except yank.  Yank shall copy the text
+  			into register '+' and also into '*' when "unnamed" is
+  			included.
+! 			Only available with the |+X11| feature.
+  			Availability can be checked with: >
+  				if has('unnamedplus')
+  <
++ 						*clipboard-autoselect*
+  	autoselect	Works like the 'a' flag in 'guioptions': If present,
+  			then whenever Visual mode is started, or the Visual
+  			area extended, Vim tries to become the owner of the
+***************
+*** 1466,1474 ****
+--- 1484,1499 ----
+  			"autoselect" flag is used.
+  			Also applies to the modeless selection.
+  
++ 						*clipboard-autoselectplus*
++ 	autoselectplus  Like "autoselect" but using the + register instead of
++ 			the * register.  Compare to the 'P' flag in
++ 			'guioptions'.
++ 
++ 						*clipboard-autoselectml*
+  	autoselectml	Like "autoselect", but for the modeless selection
+  			only.  Compare to the 'A' flag in 'guioptions'.
+  
++ 						*clipboard-html*
+  	html		When the clipboard contains HTML, use this when
+  			pasting.  When putting text on the clipboard, mark it
+  			as HTML.  This works to copy rendered HTML from
+***************
+*** 1479,1484 ****
+--- 1504,1510 ----
+  			Only supported for GTK version 2 and later.
+  			Only available with the |+multi_byte| feature.
+  
++ 						*clipboard-exclude*
+  	exclude:{pattern}
+  			Defines a pattern that is matched against the name of
+  			the terminal 'term'.  If there is a match, no
+***************
+*** 3547,3552 ****
+--- 3600,3608 ----
+  		windowing system's global selection unless explicitly told to
+  		by a yank or delete operation for the "* register.
+  		The same applies to the modeless selection.
++ 								*'go-P'*
++ 	  'P'	Like autoselect but using the "+ register instead of the "*
++ 	  	register.
+  								*'go-A'*
+  	  'A'	Autoselect for the modeless selection.  Like 'a', but only
+  		applies to the modeless selection.
+*** ../vim-7.3.596/src/normal.c	2012-06-29 13:56:01.000000000 +0200
+--- src/normal.c	2012-07-10 15:44:24.000000000 +0200
+***************
+*** 1451,1457 ****
+       * This could call do_pending_operator() recursively, but that's OK
+       * because gui_yank will be TRUE for the nested call.
+       */
+!     if (clip_star.available
+  	    && oap->op_type != OP_NOP
+  	    && !gui_yank
+  # ifdef FEAT_VISUAL
+--- 1451,1457 ----
+       * This could call do_pending_operator() recursively, but that's OK
+       * because gui_yank will be TRUE for the nested call.
+       */
+!     if ((clip_star.available || clip_plus.available)
+  	    && oap->op_type != OP_NOP
+  	    && !gui_yank
+  # ifdef FEAT_VISUAL
+*** ../vim-7.3.596/src/ops.c	2012-06-29 13:34:15.000000000 +0200
+--- src/ops.c	2012-07-10 16:20:29.000000000 +0200
+***************
+*** 962,969 ****
+       * selection too. */
+      if (name == '*' && clip_star.available)
+      {
+! 	if (clip_isautosel())
+! 	    clip_update_selection();
+  	may_get_selection(name);
+      }
+  #endif
+--- 962,975 ----
+       * selection too. */
+      if (name == '*' && clip_star.available)
+      {
+! 	if (clip_isautosel_star())
+! 	    clip_update_selection(&clip_star);
+! 	may_get_selection(name);
+!     }
+!     if (name == '+' && clip_plus.available)
+!     {
+! 	if (clip_isautosel_plus())
+! 	    clip_update_selection(&clip_plus);
+  	may_get_selection(name);
+      }
+  #endif
+***************
+*** 3190,3196 ****
+  
+  	clip_own_selection(&clip_plus);
+  	clip_gen_set_selection(&clip_plus);
+! 	if (!clip_isautosel() && !did_star && curr == &(y_regs[PLUS_REGISTER]))
+  	{
+  	    copy_yank_reg(&(y_regs[STAR_REGISTER]));
+  	    clip_own_selection(&clip_star);
+--- 3196,3203 ----
+  
+  	clip_own_selection(&clip_plus);
+  	clip_gen_set_selection(&clip_plus);
+! 	if (!clip_isautosel_star() && !did_star
+! 					  && curr == &(y_regs[PLUS_REGISTER]))
+  	{
+  	    copy_yank_reg(&(y_regs[STAR_REGISTER]));
+  	    clip_own_selection(&clip_star);
+*** ../vim-7.3.596/src/screen.c	2012-06-13 18:06:32.000000000 +0200
+--- src/screen.c	2012-07-10 16:39:01.000000000 +0200
+***************
+*** 519,526 ****
+  # endif
+  # ifdef FEAT_CLIPBOARD
+  		/* When Visual area changed, may have to update selection. */
+! 		if (clip_star.available && clip_isautosel())
+! 		    clip_update_selection();
+  # endif
+  #ifdef FEAT_GUI
+  		/* Remove the cursor before starting to do anything, because
+--- 519,528 ----
+  # endif
+  # ifdef FEAT_CLIPBOARD
+  		/* When Visual area changed, may have to update selection. */
+! 		if (clip_star.available && clip_isautosel_star())
+! 		    clip_update_selection(&clip_star);
+! 		if (clip_plus.available && clip_isautosel_plus())
+! 		    clip_update_selection(&clip_plus);
+  # endif
+  #ifdef FEAT_GUI
+  		/* Remove the cursor before starting to do anything, because
+***************
+*** 814,821 ****
+  
+  #ifdef FEAT_CLIPBOARD
+      /* When Visual area changed, may have to update selection. */
+!     if (clip_star.available && clip_isautosel())
+! 	clip_update_selection();
+  #endif
+  
+      win_update(wp);
+--- 816,825 ----
+  
+  #ifdef FEAT_CLIPBOARD
+      /* When Visual area changed, may have to update selection. */
+!     if (clip_star.available && clip_isautosel_star())
+! 	clip_update_selection(&clip_star);
+!     if (clip_plus.available && clip_isautosel_plus())
+! 	clip_update_selection(&clip_plus);
+  #endif
+  
+      win_update(wp);
+***************
+*** 3000,3006 ****
+  	    area_highlighting = TRUE;
+  	    attr = hl_attr(HLF_V);
+  #if defined(FEAT_CLIPBOARD) && defined(FEAT_X11)
+! 	    if (clip_star.available && !clip_star.owned && clip_isautosel())
+  		attr = hl_attr(HLF_VNC);
+  #endif
+  	}
+--- 3004,3013 ----
+  	    area_highlighting = TRUE;
+  	    attr = hl_attr(HLF_V);
+  #if defined(FEAT_CLIPBOARD) && defined(FEAT_X11)
+! 	    if ((clip_star.available && !clip_star.owned
+! 						     && clip_isautosel_star())
+! 		    || (clip_plus.available && !clip_plus.owned
+! 						    && clip_isautosel_plus()))
+  		attr = hl_attr(HLF_VNC);
+  #endif
+  	}
+***************
+*** 9060,9066 ****
+  	    || (wp != NULL && wp->w_width != Columns)
+  # endif
+         )
+! 	clip_clear_selection();
+      else
+  	clip_scroll_selection(-line_count);
+  #endif
+--- 9067,9073 ----
+  	    || (wp != NULL && wp->w_width != Columns)
+  # endif
+         )
+! 	clip_clear_selection(&clip_star);
+      else
+  	clip_scroll_selection(-line_count);
+  #endif
+***************
+*** 9281,9287 ****
+  	    || (wp != NULL && wp->w_width != Columns)
+  # endif
+         )
+! 	clip_clear_selection();
+      else
+  	clip_scroll_selection(line_count);
+  #endif
+--- 9288,9294 ----
+  	    || (wp != NULL && wp->w_width != Columns)
+  # endif
+         )
+! 	clip_clear_selection(&clip_star);
+      else
+  	clip_scroll_selection(line_count);
+  #endif
+*** ../vim-7.3.596/src/ui.c	2012-02-12 01:35:06.000000000 +0100
+--- src/ui.c	2012-07-10 16:43:17.000000000 +0200
+***************
+*** 381,386 ****
+--- 381,388 ----
+  
+  #if defined(FEAT_CLIPBOARD) || defined(PROTO)
+  
++ static void clip_copy_selection __ARGS((VimClipboard *clip));
++ 
+  /*
+   * Selection stuff using Visual mode, for cutting and pasting text to other
+   * windows.
+***************
+*** 423,431 ****
+   * this is called whenever VIsual mode is ended.
+   */
+      void
+! clip_update_selection()
+  {
+!     pos_T    start, end;
+  
+      /* If visual mode is only due to a redo command ("."), then ignore it */
+      if (!redo_VIsual_busy && VIsual_active && (State & NORMAL))
+--- 425,434 ----
+   * this is called whenever VIsual mode is ended.
+   */
+      void
+! clip_update_selection(clip)
+!     VimClipboard    *clip;
+  {
+!     pos_T	    start, end;
+  
+      /* If visual mode is only due to a redo command ("."), then ignore it */
+      if (!redo_VIsual_busy && VIsual_active && (State & NORMAL))
+***************
+*** 444,460 ****
+  	    start = curwin->w_cursor;
+  	    end = VIsual;
+  	}
+! 	if (!equalpos(clip_star.start, start)
+! 		|| !equalpos(clip_star.end, end)
+! 		|| clip_star.vmode != VIsual_mode)
+  	{
+! 	    clip_clear_selection();
+! 	    clip_star.start = start;
+! 	    clip_star.end = end;
+! 	    clip_star.vmode = VIsual_mode;
+! 	    clip_free_selection(&clip_star);
+! 	    clip_own_selection(&clip_star);
+! 	    clip_gen_set_selection(&clip_star);
+  	}
+      }
+  }
+--- 447,463 ----
+  	    start = curwin->w_cursor;
+  	    end = VIsual;
+  	}
+! 	if (!equalpos(clip->start, start)
+! 		|| !equalpos(clip->end, end)
+! 		|| clip->vmode != VIsual_mode)
+  	{
+! 	    clip_clear_selection(clip);
+! 	    clip->start = start;
+! 	    clip->end = end;
+! 	    clip->vmode = VIsual_mode;
+! 	    clip_free_selection(clip);
+! 	    clip_own_selection(clip);
+! 	    clip_gen_set_selection(clip);
+  	}
+      }
+  }
+***************
+*** 475,481 ****
+  	int was_owned = cbd->owned;
+  
+  	cbd->owned = (clip_gen_own_selection(cbd) == OK);
+! 	if (!was_owned && cbd == &clip_star)
+  	{
+  	    /* May have to show a different kind of highlighting for the
+  	     * selected area.  There is no specific redraw command for this,
+--- 478,484 ----
+  	int was_owned = cbd->owned;
+  
+  	cbd->owned = (clip_gen_own_selection(cbd) == OK);
+! 	if (!was_owned && (cbd == &clip_star || cbd == &clip_plus))
+  	{
+  	    /* May have to show a different kind of highlighting for the
+  	     * selected area.  There is no specific redraw command for this,
+***************
+*** 483,489 ****
+  	    if (cbd->owned
+  		    && (get_real_state() == VISUAL
+  					    || get_real_state() == SELECTMODE)
+! 		    && clip_isautosel()
+  		    && hl_attr(HLF_V) != hl_attr(HLF_VNC))
+  		redraw_curbuf_later(INVERTED_ALL);
+  	}
+--- 486,493 ----
+  	    if (cbd->owned
+  		    && (get_real_state() == VISUAL
+  					    || get_real_state() == SELECTMODE)
+! 		    && (cbd == &clip_star ? clip_isautosel_star()
+! 						      : clip_isautosel_plus())
+  		    && hl_attr(HLF_V) != hl_attr(HLF_VNC))
+  		redraw_curbuf_later(INVERTED_ALL);
+  	}
+***************
+*** 502,513 ****
+  #ifdef FEAT_X11
+      int	    was_owned = cbd->owned;
+  #endif
+!     int     visual_selection = (cbd == &clip_star);
+  
+      clip_free_selection(cbd);
+      cbd->owned = FALSE;
+      if (visual_selection)
+! 	clip_clear_selection();
+      clip_gen_lose_selection(cbd);
+  #ifdef FEAT_X11
+      if (visual_selection)
+--- 506,520 ----
+  #ifdef FEAT_X11
+      int	    was_owned = cbd->owned;
+  #endif
+!     int     visual_selection = FALSE;
+! 
+!     if (cbd == &clip_star || cbd == &clip_plus)
+! 	visual_selection = TRUE;
+  
+      clip_free_selection(cbd);
+      cbd->owned = FALSE;
+      if (visual_selection)
+! 	clip_clear_selection(cbd);
+      clip_gen_lose_selection(cbd);
+  #ifdef FEAT_X11
+      if (visual_selection)
+***************
+*** 518,524 ****
+  	if (was_owned
+  		&& (get_real_state() == VISUAL
+  					    || get_real_state() == SELECTMODE)
+! 		&& clip_isautosel()
+  		&& hl_attr(HLF_V) != hl_attr(HLF_VNC))
+  	{
+  	    update_curbuf(INVERTED_ALL);
+--- 525,532 ----
+  	if (was_owned
+  		&& (get_real_state() == VISUAL
+  					    || get_real_state() == SELECTMODE)
+! 		&& (cbd == &clip_star ?
+! 				clip_isautosel_star() : clip_isautosel_plus())
+  		&& hl_attr(HLF_V) != hl_attr(HLF_VNC))
+  	{
+  	    update_curbuf(INVERTED_ALL);
+***************
+*** 534,551 ****
+  #endif
+  }
+  
+!     void
+! clip_copy_selection()
+! {
+!     if (VIsual_active && (State & NORMAL) && clip_star.available)
+!     {
+! 	if (clip_isautosel())
+! 	    clip_update_selection();
+! 	clip_free_selection(&clip_star);
+! 	clip_own_selection(&clip_star);
+! 	if (clip_star.owned)
+! 	    clip_get_selection(&clip_star);
+! 	clip_gen_set_selection(&clip_star);
+      }
+  }
+  
+--- 542,559 ----
+  #endif
+  }
+  
+!     static void
+! clip_copy_selection(clip)
+!     VimClipboard	*clip;
+! {
+!     if (VIsual_active && (State & NORMAL) && clip->available)
+!     {
+! 	clip_update_selection(clip);
+! 	clip_free_selection(clip);
+! 	clip_own_selection(clip);
+! 	if (clip->owned)
+! 	    clip_get_selection(clip);
+! 	clip_gen_set_selection(clip);
+      }
+  }
+  
+***************
+*** 555,575 ****
+      void
+  clip_auto_select()
+  {
+!     if (clip_isautosel())
+! 	clip_copy_selection();
+  }
+  
+  /*
+!  * Return TRUE if automatic selection of Visual area is desired.
+   */
+      int
+! clip_isautosel()
+  {
+      return (
+  #ifdef FEAT_GUI
+  	    gui.in_use ? (vim_strchr(p_go, GO_ASEL) != NULL) :
+  #endif
+! 	    clip_autoselect);
+  }
+  
+  
+--- 563,600 ----
+      void
+  clip_auto_select()
+  {
+!     if (clip_isautosel_star())
+! 	clip_copy_selection(&clip_star);
+!     if (clip_isautosel_plus())
+! 	clip_copy_selection(&clip_plus);
+  }
+  
+  /*
+!  * Return TRUE if automatic selection of Visual area is desired for the *
+!  * register.
+   */
+      int
+! clip_isautosel_star()
+  {
+      return (
+  #ifdef FEAT_GUI
+  	    gui.in_use ? (vim_strchr(p_go, GO_ASEL) != NULL) :
+  #endif
+! 	    clip_autoselect_star);
+! }
+! 
+! /*
+!  * Return TRUE if automatic selection of Visual area is desired for the +
+!  * register.
+!  */
+!     int
+! clip_isautosel_plus()
+! {
+!     return (
+! #ifdef FEAT_GUI
+! 	    gui.in_use ? (vim_strchr(p_go, GO_ASELPLUS) != NULL) :
+! #endif
+! 	    clip_autoselect_plus);
+  }
+  
+  
+***************
+*** 657,663 ****
+      VimClipboard	*cb = &clip_star;
+  
+      if (cb->state == SELECT_DONE)
+! 	clip_clear_selection();
+  
+      row = check_row(row);
+      col = check_col(col);
+--- 682,688 ----
+      VimClipboard	*cb = &clip_star;
+  
+      if (cb->state == SELECT_DONE)
+! 	clip_clear_selection(cb);
+  
+      row = check_row(row);
+      col = check_col(col);
+***************
+*** 749,755 ****
+  	printf("Selection ended: (%u,%u) to (%u,%u)\n", cb->start.lnum,
+  		cb->start.col, cb->end.lnum, cb->end.col);
+  #endif
+! 	if (clip_isautosel()
+  		|| (
+  #ifdef FEAT_GUI
+  		    gui.in_use ? (vim_strchr(p_go, GO_ASELML) != NULL) :
+--- 774,780 ----
+  	printf("Selection ended: (%u,%u) to (%u,%u)\n", cb->start.lnum,
+  		cb->start.col, cb->end.lnum, cb->end.col);
+  #endif
+! 	if (clip_isautosel_star()
+  		|| (
+  #ifdef FEAT_GUI
+  		    gui.in_use ? (vim_strchr(p_go, GO_ASELML) != NULL) :
+***************
+*** 932,947 ****
+   * Called from outside to clear selected region from the display
+   */
+      void
+! clip_clear_selection()
+  {
+-     VimClipboard    *cb = &clip_star;
+  
+!     if (cb->state == SELECT_CLEARED)
+  	return;
+  
+!     clip_invert_area((int)cb->start.lnum, cb->start.col, (int)cb->end.lnum,
+! 						     cb->end.col, CLIP_CLEAR);
+!     cb->state = SELECT_CLEARED;
+  }
+  
+  /*
+--- 957,972 ----
+   * Called from outside to clear selected region from the display
+   */
+      void
+! clip_clear_selection(cbd)
+!     VimClipboard    *cbd;
+  {
+  
+!     if (cbd->state == SELECT_CLEARED)
+  	return;
+  
+!     clip_invert_area((int)cbd->start.lnum, cbd->start.col, (int)cbd->end.lnum,
+! 						     cbd->end.col, CLIP_CLEAR);
+!     cbd->state = SELECT_CLEARED;
+  }
+  
+  /*
+***************
+*** 954,960 ****
+      if (clip_star.state == SELECT_DONE
+  	    && row2 >= clip_star.start.lnum
+  	    && row1 <= clip_star.end.lnum)
+! 	clip_clear_selection();
+  }
+  
+  /*
+--- 979,985 ----
+      if (clip_star.state == SELECT_DONE
+  	    && row2 >= clip_star.start.lnum
+  	    && row1 <= clip_star.end.lnum)
+! 	clip_clear_selection(&clip_star);
+  }
+  
+  /*
+*** ../vim-7.3.596/src/globals.h	2012-06-29 12:35:40.000000000 +0200
+--- src/globals.h	2012-07-10 16:35:13.000000000 +0200
+***************
+*** 517,523 ****
+  # define CLIP_UNNAMED_PLUS 2
+  EXTERN int	clip_unnamed INIT(= 0); /* above two values or'ed */
+  
+! EXTERN int	clip_autoselect INIT(= FALSE);
+  EXTERN int	clip_autoselectml INIT(= FALSE);
+  EXTERN int	clip_html INIT(= FALSE);
+  EXTERN regprog_T *clip_exclude_prog INIT(= NULL);
+--- 517,524 ----
+  # define CLIP_UNNAMED_PLUS 2
+  EXTERN int	clip_unnamed INIT(= 0); /* above two values or'ed */
+  
+! EXTERN int	clip_autoselect_star INIT(= FALSE);
+! EXTERN int	clip_autoselect_plus INIT(= FALSE);
+  EXTERN int	clip_autoselectml INIT(= FALSE);
+  EXTERN int	clip_html INIT(= FALSE);
+  EXTERN regprog_T *clip_exclude_prog INIT(= NULL);
+*** ../vim-7.3.596/src/proto/ui.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/ui.pro	2012-07-10 16:37:35.000000000 +0200
+***************
+*** 11,27 ****
+  void ui_new_shellsize __ARGS((void));
+  void ui_breakcheck __ARGS((void));
+  void clip_init __ARGS((int can_use));
+! void clip_update_selection __ARGS((void));
+  void clip_own_selection __ARGS((VimClipboard *cbd));
+  void clip_lose_selection __ARGS((VimClipboard *cbd));
+- void clip_copy_selection __ARGS((void));
+  void clip_auto_select __ARGS((void));
+! int clip_isautosel __ARGS((void));
+  void clip_modeless __ARGS((int button, int is_click, int is_drag));
+  void clip_start_selection __ARGS((int col, int row, int repeated_click));
+  void clip_process_selection __ARGS((int button, int col, int row, int_u repeated_click));
+  void clip_may_redraw_selection __ARGS((int row, int col, int len));
+! void clip_clear_selection __ARGS((void));
+  void clip_may_clear_selection __ARGS((int row1, int row2));
+  void clip_scroll_selection __ARGS((int rows));
+  void clip_copy_modeless_selection __ARGS((int both));
+--- 11,27 ----
+  void ui_new_shellsize __ARGS((void));
+  void ui_breakcheck __ARGS((void));
+  void clip_init __ARGS((int can_use));
+! void clip_update_selection __ARGS((VimClipboard *clip));
+  void clip_own_selection __ARGS((VimClipboard *cbd));
+  void clip_lose_selection __ARGS((VimClipboard *cbd));
+  void clip_auto_select __ARGS((void));
+! int clip_isautosel_star __ARGS((void));
+! int clip_isautosel_plus __ARGS((void));
+  void clip_modeless __ARGS((int button, int is_click, int is_drag));
+  void clip_start_selection __ARGS((int col, int row, int repeated_click));
+  void clip_process_selection __ARGS((int button, int col, int row, int_u repeated_click));
+  void clip_may_redraw_selection __ARGS((int row, int col, int len));
+! void clip_clear_selection __ARGS((VimClipboard *cbd));
+  void clip_may_clear_selection __ARGS((int row1, int row2));
+  void clip_scroll_selection __ARGS((int rows));
+  void clip_copy_modeless_selection __ARGS((int both));
+*** ../vim-7.3.596/src/option.h	2012-06-06 16:12:54.000000000 +0200
+--- src/option.h	2012-07-10 15:54:32.000000000 +0200
+***************
+*** 229,234 ****
+--- 229,235 ----
+  #define GO_MENUS	'm'		/* use menu bar */
+  #define GO_NOSYSMENU	'M'		/* don't source system menu */
+  #define GO_POINTER	'p'		/* pointer enter/leave callbacks */
++ #define GO_ASELPLUS	'P'		/* autoselectPlus */
+  #define GO_RIGHT	'r'		/* use right scrollbar */
+  #define GO_VRIGHT	'R'		/* right scrollbar with vert split */
+  #define GO_TEAROFF	't'		/* add tear-off menu items */
+*** ../vim-7.3.596/src/gui.c	2012-05-27 00:37:45.000000000 +0200
+--- src/gui.c	2012-07-10 16:43:34.000000000 +0200
+***************
+*** 3154,3160 ****
+      }
+  
+      if (clip_star.state != SELECT_CLEARED && !did_clip)
+! 	clip_clear_selection();
+  #endif
+  
+      /* Don't put events in the input queue now. */
+--- 3154,3160 ----
+      }
+  
+      if (clip_star.state != SELECT_CLEARED && !did_clip)
+! 	clip_clear_selection(&clip_star);
+  #endif
+  
+      /* Don't put events in the input queue now. */
+*** ../vim-7.3.596/src/version.c	2012-07-10 15:18:18.000000000 +0200
+--- src/version.c	2012-07-10 16:32:16.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     597,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+106. When told to "go to your room" you inform your parents that you
+     can't...because you were kicked out and banned.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.598 b/source/ap/vim/patches/7.3.598
new file mode 100644
index 00000000..3a38b4a7
--- /dev/null
+++ b/source/ap/vim/patches/7.3.598
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.598
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.598
+Problem:    Cannot act upon end of completion. (Taro Muraoka)
+Solution:   Add an autocommand event that is triggered when completion has
+	    finished. (Idea by Florian Klein)
+Files:	    src/edit.c, src/fileio.c, src/vim.h
+
+
+*** ../vim-7.3.597/src/edit.c	2012-07-06 13:36:36.000000000 +0200
+--- src/edit.c	2012-07-10 17:02:37.000000000 +0200
+***************
+*** 3824,3829 ****
+--- 3824,3834 ----
+  	    if (want_cindent && in_cinkeys(KEY_COMPLETE, ' ', inindent(0)))
+  		do_c_expr_indent();
+  #endif
++ #ifdef FEAT_AUTOCMD
++ 	    /* Trigger the CompleteDone event to give scripts a chance to act
++ 	     * upon the completion. */
++ 	    apply_autocmds(EVENT_COMPLETEDONE, NULL, NULL, FALSE, curbuf);
++ #endif
+  	}
+      }
+  
+*** ../vim-7.3.597/src/fileio.c	2012-06-13 14:28:16.000000000 +0200
+--- src/fileio.c	2012-07-10 17:05:51.000000000 +0200
+***************
+*** 7643,7648 ****
+--- 7643,7649 ----
+      {"CmdwinEnter",	EVENT_CMDWINENTER},
+      {"CmdwinLeave",	EVENT_CMDWINLEAVE},
+      {"ColorScheme",	EVENT_COLORSCHEME},
++     {"CompleteDone",	EVENT_COMPLETEDONE},
+      {"CursorHold",	EVENT_CURSORHOLD},
+      {"CursorHoldI",	EVENT_CURSORHOLDI},
+      {"CursorMoved",	EVENT_CURSORMOVED},
+*** ../vim-7.3.597/src/vim.h	2012-07-10 13:41:09.000000000 +0200
+--- src/vim.h	2012-07-10 17:06:24.000000000 +0200
+***************
+*** 1241,1246 ****
+--- 1241,1247 ----
+      EVENT_CMDWINENTER,		/* after entering the cmdline window */
+      EVENT_CMDWINLEAVE,		/* before leaving the cmdline window */
+      EVENT_COLORSCHEME,		/* after loading a colorscheme */
++     EVENT_COMPLETEDONE,		/* after finishing insert complete */
+      EVENT_FILEAPPENDPOST,	/* after appending to a file */
+      EVENT_FILEAPPENDPRE,	/* before appending to a file */
+      EVENT_FILEAPPENDCMD,	/* append to a file using command */
+*** ../vim-7.3.597/src/version.c	2012-07-10 16:49:08.000000000 +0200
+--- src/version.c	2012-07-10 17:08:41.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     598,
+  /**/
+
+-- 
+Laughing helps. It's like jogging on the inside.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.599 b/source/ap/vim/patches/7.3.599
new file mode 100644
index 00000000..adfe6f99
--- /dev/null
+++ b/source/ap/vim/patches/7.3.599
@@ -0,0 +1,107 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.599
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.599 (after 7.3.597)
+Problem:    Missing change in one file.
+Solution:   Patch for changed clip_autoselect().
+Files:      src/option.c
+
+
+*** ../vim-7.3.598/src/option.c	2012-06-29 15:51:26.000000000 +0200
+--- src/option.c	2012-07-10 16:35:07.000000000 +0200
+***************
+*** 7377,7383 ****
+  check_clipboard_option()
+  {
+      int		new_unnamed = 0;
+!     int		new_autoselect = FALSE;
+      int		new_autoselectml = FALSE;
+      int		new_html = FALSE;
+      regprog_T	*new_exclude_prog = NULL;
+--- 7377,7384 ----
+  check_clipboard_option()
+  {
+      int		new_unnamed = 0;
+!     int		new_autoselect_star = FALSE;
+!     int		new_autoselect_plus = FALSE;
+      int		new_autoselectml = FALSE;
+      int		new_html = FALSE;
+      regprog_T	*new_exclude_prog = NULL;
+***************
+*** 7398,7410 ****
+  	    p += 11;
+  	}
+  	else if (STRNCMP(p, "autoselect", 10) == 0
+! 					&& (p[10] == ',' || p[10] == NUL))
+  	{
+! 	    new_autoselect = TRUE;
+  	    p += 10;
+  	}
+  	else if (STRNCMP(p, "autoselectml", 12) == 0
+! 					&& (p[12] == ',' || p[12] == NUL))
+  	{
+  	    new_autoselectml = TRUE;
+  	    p += 12;
+--- 7399,7417 ----
+  	    p += 11;
+  	}
+  	else if (STRNCMP(p, "autoselect", 10) == 0
+! 					    && (p[10] == ',' || p[10] == NUL))
+  	{
+! 	    new_autoselect_star = TRUE;
+  	    p += 10;
+  	}
++ 	else if (STRNCMP(p, "autoselectplus", 14) == 0
++ 					    && (p[14] == ',' || p[14] == NUL))
++ 	{
++ 	    new_autoselect_plus = TRUE;
++ 	    p += 14;
++ 	}
+  	else if (STRNCMP(p, "autoselectml", 12) == 0
+! 					    && (p[12] == ',' || p[12] == NUL))
+  	{
+  	    new_autoselectml = TRUE;
+  	    p += 12;
+***************
+*** 7433,7439 ****
+      if (errmsg == NULL)
+      {
+  	clip_unnamed = new_unnamed;
+! 	clip_autoselect = new_autoselect;
+  	clip_autoselectml = new_autoselectml;
+  	clip_html = new_html;
+  	vim_free(clip_exclude_prog);
+--- 7440,7447 ----
+      if (errmsg == NULL)
+      {
+  	clip_unnamed = new_unnamed;
+! 	clip_autoselect_star = new_autoselect_star;
+! 	clip_autoselect_plus = new_autoselect_plus;
+  	clip_autoselectml = new_autoselectml;
+  	clip_html = new_html;
+  	vim_free(clip_exclude_prog);
+*** ../vim-7.3.598/src/version.c	2012-07-10 17:14:50.000000000 +0200
+--- src/version.c	2012-07-10 18:30:17.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     599,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+108. While reading a magazine, you look for the Zoom icon for a better
+     look at a photograph.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.600 b/source/ap/vim/patches/7.3.600
new file mode 100644
index 00000000..6504da01
--- /dev/null
+++ b/source/ap/vim/patches/7.3.600
@@ -0,0 +1,68 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.600
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.600
+Problem:    <f-args> is not expanded properly with DBCS encoding.
+Solution:   Skip over character instead of byte. (Yukihiro Nakadaira)
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.599/src/ex_docmd.c	2012-07-06 18:27:34.000000000 +0200
+--- src/ex_docmd.c	2012-07-10 19:20:10.000000000 +0200
+***************
+*** 5845,5852 ****
+--- 5845,5858 ----
+  	}
+  	else
+  	{
++ #ifdef FEAT_MBYTE
++ 	    int charlen = (*mb_ptr2len)(p);
++ 	    len += charlen;
++ 	    p += charlen;
++ #else
+  	    ++len;
+  	    ++p;
++ #endif
+  	}
+      }
+  
+***************
+*** 5889,5895 ****
+  	}
+  	else
+  	{
+! 	    *q++ = *p++;
+  	}
+      }
+      *q++ = '"';
+--- 5895,5901 ----
+  	}
+  	else
+  	{
+! 	    MB_COPY_CHAR(p, q);
+  	}
+      }
+      *q++ = '"';
+*** ../vim-7.3.599/src/version.c	2012-07-10 18:31:49.000000000 +0200
+--- src/version.c	2012-07-10 19:21:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     600,
+  /**/
+
+-- 
+In a world without walls and borders, who needs windows and gates?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.601 b/source/ap/vim/patches/7.3.601
new file mode 100644
index 00000000..b61a9331
--- /dev/null
+++ b/source/ap/vim/patches/7.3.601
@@ -0,0 +1,51 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.601
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.601
+Problem:    Bad code style.
+Solution:   Insert space, remove parens.
+Files:	    src/farsi.c
+
+
+*** ../vim-7.3.600/src/farsi.c	2010-08-15 21:57:28.000000000 +0200
+--- src/farsi.c	2012-07-12 21:59:15.000000000 +0200
+***************
+*** 1813,1819 ****
+  		ptr[i] = toF_leading(ptr[i]);
+  		++i;
+  
+! 		while(canF_Rjoin(ptr[i]) && (i < llen))
+  		{
+  		    ptr[i] = toF_Rjoin(ptr[i]);
+  		    if (F_isterm(ptr[i]) || !F_isalpha(ptr[i]))
+--- 1813,1819 ----
+  		ptr[i] = toF_leading(ptr[i]);
+  		++i;
+  
+! 		while (canF_Rjoin(ptr[i]) && i < llen)
+  		{
+  		    ptr[i] = toF_Rjoin(ptr[i]);
+  		    if (F_isterm(ptr[i]) || !F_isalpha(ptr[i]))
+*** ../vim-7.3.600/src/version.c	2012-07-10 19:25:06.000000000 +0200
+--- src/version.c	2012-07-16 17:25:48.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     601,
+  /**/
+
+-- 
+There are three kinds of persons: Those who can count and those who can't.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.602 b/source/ap/vim/patches/7.3.602
new file mode 100644
index 00000000..fd5f3cf4
--- /dev/null
+++ b/source/ap/vim/patches/7.3.602
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.602
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.602
+Problem:    Missing files in distribution.
+Solution:   Update the list of files.
+Files:	    Filelist
+
+
+*** ../vim-7.3.601/Filelist	2011-10-20 16:35:25.000000000 +0200
+--- Filelist	2012-06-20 12:06:41.000000000 +0200
+***************
+*** 463,468 ****
+--- 463,469 ----
+  		runtime/macros/hanoi/hanoi.vim \
+  		runtime/macros/hanoi/poster \
+  		runtime/macros/justify.vim \
++ 		runtime/macros/less.bat \
+  		runtime/macros/less.sh \
+  		runtime/macros/less.vim \
+  		runtime/macros/life/click.me \
+***************
+*** 666,671 ****
+--- 667,674 ----
+  
+  # generic language files
+  LANG_GEN = \
++ 		runtime/doc/*-de.1 \
++ 		runtime/doc/*-de.UTF-8.1 \
+  		runtime/doc/*-fr.1 \
+  		runtime/doc/*-fr.UTF-8.1 \
+  		runtime/doc/*-it.1 \
+*** ../vim-7.3.601/src/version.c	2012-07-16 17:26:18.000000000 +0200
+--- src/version.c	2012-07-16 17:27:31.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     602,
+  /**/
+
+-- 
+Never eat yellow snow.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.603 b/source/ap/vim/patches/7.3.603
new file mode 100644
index 00000000..00a024b0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.603
@@ -0,0 +1,370 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.603
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.603
+Problem:    It is possible to add replace builtin functions by calling
+	    extend() on g:.
+Solution:   Add a flag to a dict to indicate it is a scope.  Check for
+	    existing functions. (ZyX)
+Files:	    src/buffer.c, src/eval.c, src/proto/eval.pro, src/structs.h,
+	    src/testdir/test34.in, src/testdir/test34.ok, src/window.c
+
+
+*** ../vim-7.3.602/src/buffer.c	2012-07-10 15:18:18.000000000 +0200
+--- src/buffer.c	2012-07-16 16:52:58.000000000 +0200
+***************
+*** 1747,1753 ****
+      buf->b_wininfo->wi_win = curwin;
+  
+  #ifdef FEAT_EVAL
+!     init_var_dict(&buf->b_vars, &buf->b_bufvar);    /* init b: variables */
+  #endif
+  #ifdef FEAT_SYN_HL
+      hash_init(&buf->b_s.b_keywtab);
+--- 1747,1754 ----
+      buf->b_wininfo->wi_win = curwin;
+  
+  #ifdef FEAT_EVAL
+!     /* init b: variables */
+!     init_var_dict(&buf->b_vars, &buf->b_bufvar, VAR_SCOPE);
+  #endif
+  #ifdef FEAT_SYN_HL
+      hash_init(&buf->b_s.b_keywtab);
+*** ../vim-7.3.602/src/eval.c	2012-07-10 13:41:09.000000000 +0200
+--- src/eval.c	2012-07-16 17:18:11.000000000 +0200
+***************
+*** 850,857 ****
+      int		    i;
+      struct vimvar   *p;
+  
+!     init_var_dict(&globvardict, &globvars_var);
+!     init_var_dict(&vimvardict, &vimvars_var);
+      vimvardict.dv_lock = VAR_FIXED;
+      hash_init(&compat_hashtab);
+      hash_init(&func_hashtab);
+--- 850,857 ----
+      int		    i;
+      struct vimvar   *p;
+  
+!     init_var_dict(&globvardict, &globvars_var, VAR_DEF_SCOPE);
+!     init_var_dict(&vimvardict, &vimvars_var, VAR_SCOPE);
+      vimvardict.dv_lock = VAR_FIXED;
+      hash_init(&compat_hashtab);
+      hash_init(&func_hashtab);
+***************
+*** 2725,2738 ****
+  	    lp->ll_dict = lp->ll_tv->vval.v_dict;
+  	    lp->ll_di = dict_find(lp->ll_dict, key, len);
+  
+! 	    /* When assigning to g: check that a function and variable name is
+! 	     * valid. */
+! 	    if (rettv != NULL && lp->ll_dict == &globvardict)
+  	    {
+! 		if (rettv->v_type == VAR_FUNC
+  			       && var_check_func_name(key, lp->ll_di == NULL))
+! 		    return NULL;
+! 		if (!valid_varname(key))
+  		    return NULL;
+  	    }
+  
+--- 2725,2750 ----
+  	    lp->ll_dict = lp->ll_tv->vval.v_dict;
+  	    lp->ll_di = dict_find(lp->ll_dict, key, len);
+  
+! 	    /* When assigning to a scope dictionary check that a function and
+! 	     * variable name is valid (only variable name unless it is l: or
+! 	     * g: dictionary). Disallow overwriting a builtin function. */
+! 	    if (rettv != NULL && lp->ll_dict->dv_scope != 0)
+  	    {
+! 		int prevval;
+! 		int wrong;
+! 
+! 		if (len != -1)
+! 		{
+! 		    prevval = key[len];
+! 		    key[len] = NUL;
+! 		}
+! 		wrong = (lp->ll_dict->dv_scope == VAR_DEF_SCOPE
+! 			       && rettv->v_type == VAR_FUNC
+  			       && var_check_func_name(key, lp->ll_di == NULL))
+! 			|| !valid_varname(key);
+! 		if (len != -1)
+! 		    key[len] = prevval;
+! 		if (wrong)
+  		    return NULL;
+  	    }
+  
+***************
+*** 6951,6957 ****
+      d = (dict_T *)alloc(sizeof(dict_T));
+      if (d != NULL)
+      {
+! 	/* Add the list to the list of dicts for garbage collection. */
+  	if (first_dict != NULL)
+  	    first_dict->dv_used_prev = d;
+  	d->dv_used_next = first_dict;
+--- 6963,6969 ----
+      d = (dict_T *)alloc(sizeof(dict_T));
+      if (d != NULL)
+      {
+! 	/* Add the dict to the list of dicts for garbage collection. */
+  	if (first_dict != NULL)
+  	    first_dict->dv_used_prev = d;
+  	d->dv_used_next = first_dict;
+***************
+*** 6960,6965 ****
+--- 6972,6978 ----
+  
+  	hash_init(&d->dv_hashtab);
+  	d->dv_lock = 0;
++ 	d->dv_scope = 0;
+  	d->dv_refcount = 0;
+  	d->dv_copyID = 0;
+      }
+***************
+*** 10203,10208 ****
+--- 10216,10234 ----
+  		{
+  		    --todo;
+  		    di1 = dict_find(d1, hi2->hi_key, -1);
++ 		    if (d1->dv_scope != 0)
++ 		    {
++ 			/* Disallow replacing a builtin function in l: and g:.
++ 			 * Check the key to be valid when adding to any
++ 			 * scope. */
++ 		        if (d1->dv_scope == VAR_DEF_SCOPE
++ 				&& HI2DI(hi2)->di_tv.v_type == VAR_FUNC
++ 				&& var_check_func_name(hi2->hi_key,
++ 								 di1 == NULL))
++ 			    break;
++ 			if (!valid_varname(hi2->hi_key))
++ 			    break;
++ 		    }
+  		    if (di1 == NULL)
+  		    {
+  			di1 = dictitem_copy(HI2DI(hi2));
+***************
+*** 20027,20033 ****
+  	{
+  	    sv = SCRIPT_SV(ga_scripts.ga_len + 1) =
+  		(scriptvar_T *)alloc_clear(sizeof(scriptvar_T));
+! 	    init_var_dict(&sv->sv_dict, &sv->sv_var);
+  	    ++ga_scripts.ga_len;
+  	}
+      }
+--- 20053,20059 ----
+  	{
+  	    sv = SCRIPT_SV(ga_scripts.ga_len + 1) =
+  		(scriptvar_T *)alloc_clear(sizeof(scriptvar_T));
+! 	    init_var_dict(&sv->sv_dict, &sv->sv_var, VAR_SCOPE);
+  	    ++ga_scripts.ga_len;
+  	}
+      }
+***************
+*** 20038,20049 ****
+   * point to it.
+   */
+      void
+! init_var_dict(dict, dict_var)
+      dict_T	*dict;
+      dictitem_T	*dict_var;
+  {
+      hash_init(&dict->dv_hashtab);
+      dict->dv_lock = 0;
+      dict->dv_refcount = DO_NOT_FREE_CNT;
+      dict->dv_copyID = 0;
+      dict_var->di_tv.vval.v_dict = dict;
+--- 20064,20077 ----
+   * point to it.
+   */
+      void
+! init_var_dict(dict, dict_var, scope)
+      dict_T	*dict;
+      dictitem_T	*dict_var;
++     int		scope;
+  {
+      hash_init(&dict->dv_hashtab);
+      dict->dv_lock = 0;
++     dict->dv_scope = scope;
+      dict->dv_refcount = DO_NOT_FREE_CNT;
+      dict->dv_copyID = 0;
+      dict_var->di_tv.vval.v_dict = dict;
+***************
+*** 22304,22310 ****
+      /*
+       * Init l: variables.
+       */
+!     init_var_dict(&fc->l_vars, &fc->l_vars_var);
+      if (selfdict != NULL)
+      {
+  	/* Set l:self to "selfdict".  Use "name" to avoid a warning from
+--- 22332,22338 ----
+      /*
+       * Init l: variables.
+       */
+!     init_var_dict(&fc->l_vars, &fc->l_vars_var, VAR_DEF_SCOPE);
+      if (selfdict != NULL)
+      {
+  	/* Set l:self to "selfdict".  Use "name" to avoid a warning from
+***************
+*** 22325,22331 ****
+       * Set a:0 to "argcount".
+       * Set a:000 to a list with room for the "..." arguments.
+       */
+!     init_var_dict(&fc->l_avars, &fc->l_avars_var);
+      add_nr_var(&fc->l_avars, &fc->fixvar[fixvar_idx++].var, "0",
+  				(varnumber_T)(argcount - fp->uf_args.ga_len));
+      /* Use "name" to avoid a warning from some compiler that checks the
+--- 22353,22359 ----
+       * Set a:0 to "argcount".
+       * Set a:000 to a list with room for the "..." arguments.
+       */
+!     init_var_dict(&fc->l_avars, &fc->l_avars_var, VAR_SCOPE);
+      add_nr_var(&fc->l_avars, &fc->fixvar[fixvar_idx++].var, "0",
+  				(varnumber_T)(argcount - fp->uf_args.ga_len));
+      /* Use "name" to avoid a warning from some compiler that checks the
+*** ../vim-7.3.602/src/proto/eval.pro	2012-06-29 12:54:32.000000000 +0200
+--- src/proto/eval.pro	2012-07-16 16:55:16.000000000 +0200
+***************
+*** 93,99 ****
+  char_u *get_tv_string_chk __ARGS((typval_T *varp));
+  char_u *get_var_value __ARGS((char_u *name));
+  void new_script_vars __ARGS((scid_T id));
+! void init_var_dict __ARGS((dict_T *dict, dictitem_T *dict_var));
+  void vars_clear __ARGS((hashtab_T *ht));
+  void copy_tv __ARGS((typval_T *from, typval_T *to));
+  void ex_echo __ARGS((exarg_T *eap));
+--- 93,99 ----
+  char_u *get_tv_string_chk __ARGS((typval_T *varp));
+  char_u *get_var_value __ARGS((char_u *name));
+  void new_script_vars __ARGS((scid_T id));
+! void init_var_dict __ARGS((dict_T *dict, dictitem_T *dict_var, int scope));
+  void vars_clear __ARGS((hashtab_T *ht));
+  void copy_tv __ARGS((typval_T *from, typval_T *to));
+  void ex_echo __ARGS((exarg_T *eap));
+*** ../vim-7.3.602/src/structs.h	2012-06-06 19:02:40.000000000 +0200
+--- src/structs.h	2012-07-16 16:56:43.000000000 +0200
+***************
+*** 1106,1111 ****
+--- 1106,1116 ----
+  #define VAR_DICT    5	/* "v_dict" is used */
+  #define VAR_FLOAT   6	/* "v_float" is used */
+  
++ /* Values for "dv_scope". */
++ #define VAR_SCOPE     1	/* a:, v:, s:, etc. scope dictionaries */
++ #define VAR_DEF_SCOPE 2	/* l:, g: scope dictionaries: here funcrefs are not
++ 			   allowed to mask existing functions */
++ 
+  /* Values for "v_lock". */
+  #define VAR_LOCKED  1	/* locked with lock(), can use unlock() */
+  #define VAR_FIXED   2	/* locked forever */
+***************
+*** 1181,1186 ****
+--- 1186,1192 ----
+      int		dv_copyID;	/* ID used by deepcopy() */
+      dict_T	*dv_copydict;	/* copied dict used by deepcopy() */
+      char	dv_lock;	/* zero, VAR_LOCKED, VAR_FIXED */
++     char	dv_scope;	/* zero, VAR_SCOPE, VAR_DEF_SCOPE */
+      dict_T	*dv_used_next;	/* next dict in used dicts list */
+      dict_T	*dv_used_prev;	/* previous dict in used dicts list */
+  };
+*** ../vim-7.3.602/src/testdir/test34.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test34.in	2012-07-16 16:51:29.000000000 +0200
+***************
+*** 1,5 ****
+--- 1,6 ----
+  Test for user functions.
+  Also test an <expr> mapping calling a function.
++ Also test that a builtin function cannot be replaced.
+  
+  STARTTEST
+  :so small.vim
+***************
+*** 58,64 ****
+  ---*---
+  (one
+  (two
+! [(one again:$-5,$w! test.out
+  :delfunc Table
+  :delfunc Compute
+  :delfunc Expr1
+--- 59,68 ----
+  ---*---
+  (one
+  (two
+! [(one again:call append(line('$'), max([1, 2, 3]))
+! :call extend(g:, {'max': function('min')})
+! :call append(line('$'), max([1, 2, 3]))
+! :$-7,$w! test.out
+  :delfunc Table
+  :delfunc Compute
+  :delfunc Expr1
+*** ../vim-7.3.602/src/testdir/test34.ok	2011-10-12 22:02:07.000000000 +0200
+--- src/testdir/test34.ok	2012-07-16 16:43:15.000000000 +0200
+***************
+*** 4,6 ****
+--- 4,8 ----
+  1. one
+  2. two
+  1. one again
++ 3
++ 3
+*** ../vim-7.3.602/src/window.c	2012-07-06 18:27:34.000000000 +0200
+--- src/window.c	2012-07-16 16:53:45.000000000 +0200
+***************
+*** 3468,3474 ****
+  # endif
+  #ifdef FEAT_EVAL
+  	/* init t: variables */
+! 	init_var_dict(&tp->tp_vars, &tp->tp_winvar);
+  #endif
+  	tp->tp_ch_used = p_ch;
+      }
+--- 3468,3474 ----
+  # endif
+  #ifdef FEAT_EVAL
+  	/* init t: variables */
+! 	init_var_dict(&tp->tp_vars, &tp->tp_winvar, VAR_SCOPE);
+  #endif
+  	tp->tp_ch_used = p_ch;
+      }
+***************
+*** 4410,4416 ****
+  #endif
+  #ifdef FEAT_EVAL
+  	/* init w: variables */
+! 	init_var_dict(&new_wp->w_vars, &new_wp->w_winvar);
+  #endif
+  #ifdef FEAT_FOLDING
+  	foldInitWin(new_wp);
+--- 4410,4416 ----
+  #endif
+  #ifdef FEAT_EVAL
+  	/* init w: variables */
+! 	init_var_dict(&new_wp->w_vars, &new_wp->w_winvar, VAR_SCOPE);
+  #endif
+  #ifdef FEAT_FOLDING
+  	foldInitWin(new_wp);
+*** ../vim-7.3.602/src/version.c	2012-07-16 17:27:57.000000000 +0200
+--- src/version.c	2012-07-16 17:29:06.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     603,
+  /**/
+
+-- 
+Birthdays are healthy.  The more you have them, the longer you live.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.604 b/source/ap/vim/patches/7.3.604
new file mode 100644
index 00000000..f7e63bd0
--- /dev/null
+++ b/source/ap/vim/patches/7.3.604
@@ -0,0 +1,60 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.604
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.604
+Problem:    inputdialog() doesn't use the cancel argument in the console.
+	    (David Fishburn)
+Solution:   Use the third argument. (Christian Brabant)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.603/src/eval.c	2012-07-16 17:31:48.000000000 +0200
+--- src/eval.c	2012-07-16 19:20:47.000000000 +0200
+***************
+*** 12940,12945 ****
+--- 12940,12946 ----
+  		int	xp_namelen;
+  		long	argt;
+  
++ 		/* input() with a third argument: completion */
+  		rettv->vval.v_string = NULL;
+  
+  		xp_name = get_tv_string_buf_chk(&argvars[2], buf);
+***************
+*** 12958,12963 ****
+--- 12959,12969 ----
+  	    rettv->vval.v_string =
+  		getcmdline_prompt(inputsecret_flag ? NUL : '@', p, echo_attr,
+  				  xp_type, xp_arg);
++ 	if (rettv->vval.v_string == NULL
++ 		&& argvars[1].v_type != VAR_UNKNOWN
++ 		&& argvars[2].v_type != VAR_UNKNOWN)
++ 	    rettv->vval.v_string = vim_strsave(get_tv_string_buf(
++ 							   &argvars[2], buf));
+  
+  	vim_free(xp_arg);
+  
+*** ../vim-7.3.603/src/version.c	2012-07-16 17:31:48.000000000 +0200
+--- src/version.c	2012-07-16 19:23:11.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     604,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+135. You cut classes or miss work so you can stay home and browse the web.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.605 b/source/ap/vim/patches/7.3.605
new file mode 100644
index 00000000..70338251
--- /dev/null
+++ b/source/ap/vim/patches/7.3.605
@@ -0,0 +1,86 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.605
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.605 (after 7.3.577)
+Problem:    MS-Windows: Can't compile with older compilers. (Titov Anatoly)
+Solution:   Add #ifdef for MEMORYSTATUSEX.
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.604/src/os_win32.c	2012-06-29 15:51:26.000000000 +0200
+--- src/os_win32.c	2012-07-19 11:35:00.000000000 +0200
+***************
+*** 4999,5020 ****
+      long_u
+  mch_avail_mem(int special)
+  {
+!     if (g_PlatformId != VER_PLATFORM_WIN32_NT)
+!     {
+! 	MEMORYSTATUS	ms;
+! 
+! 	ms.dwLength = sizeof(MEMORYSTATUS);
+! 	GlobalMemoryStatus(&ms);
+! 	return (long_u)((ms.dwAvailPhys + ms.dwAvailPageFile) >> 10);
+!     }
+!     else
+      {
+  	MEMORYSTATUSEX	ms;
+  
+  	ms.dwLength = sizeof(MEMORYSTATUSEX);
+  	GlobalMemoryStatusEx(&ms);
+  	return (long_u)((ms.ullAvailPhys + ms.ullAvailPageFile) >> 10);
+      }
+  }
+  
+  #ifdef FEAT_MBYTE
+--- 4999,5025 ----
+      long_u
+  mch_avail_mem(int special)
+  {
+! #ifdef MEMORYSTATUSEX
+!     PlatformId();
+!     if (g_PlatformId == VER_PLATFORM_WIN32_NT)
+      {
+  	MEMORYSTATUSEX	ms;
+  
++ 	/* Need to use GlobalMemoryStatusEx() when there is more memory than
++ 	 * what fits in 32 bits. But it's not always available. */
+  	ms.dwLength = sizeof(MEMORYSTATUSEX);
+  	GlobalMemoryStatusEx(&ms);
+  	return (long_u)((ms.ullAvailPhys + ms.ullAvailPageFile) >> 10);
+      }
++     else
++ #endif
++     {
++ 	MEMORYSTATUS	ms;
++ 
++ 	ms.dwLength = sizeof(MEMORYSTATUS);
++ 	GlobalMemoryStatus(&ms);
++ 	return (long_u)((ms.dwAvailPhys + ms.dwAvailPageFile) >> 10);
++     }
+  }
+  
+  #ifdef FEAT_MBYTE
+*** ../vim-7.3.604/src/version.c	2012-07-16 19:27:25.000000000 +0200
+--- src/version.c	2012-07-19 11:36:12.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     605,
+  /**/
+
+-- 
+Fingers not found - Pound head on keyboard to continue.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.606 b/source/ap/vim/patches/7.3.606
new file mode 100644
index 00000000..2296653c
--- /dev/null
+++ b/source/ap/vim/patches/7.3.606
@@ -0,0 +1,76 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.606
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.606
+Problem:    CTRL-P completion has a problem with multi-byte characters.
+Solution:   Check for next character being NUL properly.  (Yasuhiro Matsumoto)
+Files:	    src/search.c, src/macros.h
+
+
+*** ../vim-7.3.605/src/search.c	2012-06-06 16:12:54.000000000 +0200
+--- src/search.c	2012-07-19 17:09:20.000000000 +0200
+***************
+*** 5141,5147 ****
+  		    && !(compl_cont_status & CONT_SOL)
+  #endif
+  		    && *startp != NUL
+! 		    && *(p = startp + 1) != NUL)
+  		goto search_line;
+  	}
+  	line_breakcheck();
+--- 5141,5147 ----
+  		    && !(compl_cont_status & CONT_SOL)
+  #endif
+  		    && *startp != NUL
+! 		    && *(p = startp + MB_PTR2LEN(startp)) != NUL)
+  		goto search_line;
+  	}
+  	line_breakcheck();
+*** ../vim-7.3.605/src/macros.h	2010-09-21 16:56:29.000000000 +0200
+--- src/macros.h	2012-07-19 17:08:38.000000000 +0200
+***************
+*** 259,264 ****
+--- 259,266 ----
+   * PTR2CHAR(): get character from pointer.
+   */
+  #ifdef FEAT_MBYTE
++ /* Get the length of the character p points to */
++ # define MB_PTR2LEN(p)		(has_mbyte ? (*mb_ptr2len)(p) : 1)
+  /* Advance multi-byte pointer, skip over composing chars. */
+  # define mb_ptr_adv(p)	    p += has_mbyte ? (*mb_ptr2len)(p) : 1
+  /* Advance multi-byte pointer, do not skip over composing chars. */
+***************
+*** 272,277 ****
+--- 274,280 ----
+  # define MB_CHARLEN(p)	    (has_mbyte ? mb_charlen(p) : (int)STRLEN(p))
+  # define PTR2CHAR(p)	    (has_mbyte ? mb_ptr2char(p) : (int)*(p))
+  #else
++ # define MB_PTR2LEN(p)		1
+  # define mb_ptr_adv(p)		++p
+  # define mb_cptr_adv(p)		++p
+  # define mb_ptr_back(s, p)	--p
+*** ../vim-7.3.605/src/version.c	2012-07-19 11:37:22.000000000 +0200
+--- src/version.c	2012-07-19 17:13:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     606,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+151. You find yourself engaged to someone you've never actually met,
+     except through e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.607 b/source/ap/vim/patches/7.3.607
new file mode 100644
index 00000000..4dbf559d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.607
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.607
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.607
+Problem:    With an 8 color terminal the selected menu item is black on black,
+	    because darkGrey as bg is the same as black.
+Solution:   Swap fg and bg colors. (James McCoy)
+Files:	    src/syntax.c
+
+
+*** ../vim-7.3.606/src/syntax.c	2012-06-01 13:18:48.000000000 +0200
+--- src/syntax.c	2012-07-19 17:34:42.000000000 +0200
+***************
+*** 6653,6660 ****
+  	     "PmenuThumb ctermbg=White guibg=White"),
+  	CENT("Pmenu ctermbg=Magenta ctermfg=Black",
+  	     "Pmenu ctermbg=Magenta ctermfg=Black guibg=Magenta"),
+! 	CENT("PmenuSel ctermbg=DarkGrey ctermfg=Black",
+! 	     "PmenuSel ctermbg=DarkGrey ctermfg=Black guibg=DarkGrey"),
+  #endif
+  	CENT("Title term=bold ctermfg=LightMagenta",
+  	     "Title term=bold ctermfg=LightMagenta gui=bold guifg=Magenta"),
+--- 6653,6660 ----
+  	     "PmenuThumb ctermbg=White guibg=White"),
+  	CENT("Pmenu ctermbg=Magenta ctermfg=Black",
+  	     "Pmenu ctermbg=Magenta ctermfg=Black guibg=Magenta"),
+! 	CENT("PmenuSel ctermbg=Black ctermfg=DarkGrey",
+! 	     "PmenuSel ctermbg=Black ctermfg=DarkGrey guibg=DarkGrey"),
+  #endif
+  	CENT("Title term=bold ctermfg=LightMagenta",
+  	     "Title term=bold ctermfg=LightMagenta gui=bold guifg=Magenta"),
+*** ../vim-7.3.606/src/version.c	2012-07-19 17:18:21.000000000 +0200
+--- src/version.c	2012-07-19 17:38:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     607,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+152. You find yourself falling for someone you've never seen or hardly
+     know, but, boy can he/she TYPE!!!!!!
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.608 b/source/ap/vim/patches/7.3.608
new file mode 100644
index 00000000..148bc494
--- /dev/null
+++ b/source/ap/vim/patches/7.3.608
@@ -0,0 +1,119 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.608
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.608
+Problem:    winrestview() does not always restore the view correctly.
+Solution:   Call win_new_height() and win_new_width(). (Lech Lorens)
+Files:	    src/eval.c, src/proto/window.pro, src/window.c
+
+
+*** ../vim-7.3.607/src/eval.c	2012-07-16 19:27:25.000000000 +0200
+--- src/eval.c	2012-07-19 17:50:16.000000000 +0200
+***************
+*** 18601,18606 ****
+--- 18601,18610 ----
+  	curwin->w_skipcol = get_dict_number(dict, (char_u *)"skipcol");
+  
+  	check_cursor();
++ 	win_new_height(curwin, curwin->w_height);
++ # ifdef FEAT_VERTSPLIT
++ 	win_new_width(curwin, W_WIDTH(curwin));
++ # endif
+  	changed_window_setting();
+  
+  	if (curwin->w_topline == 0)
+*** ../vim-7.3.607/src/proto/window.pro	2012-06-13 14:28:16.000000000 +0200
+--- src/proto/window.pro	2012-07-19 18:05:10.000000000 +0200
+***************
+*** 51,56 ****
+--- 51,58 ----
+  void win_setminheight __ARGS((void));
+  void win_drag_status_line __ARGS((win_T *dragwin, int offset));
+  void win_drag_vsep_line __ARGS((win_T *dragwin, int offset));
++ void win_new_height __ARGS((win_T *wp, int height));
++ void win_new_width __ARGS((win_T *wp, int width));
+  void win_comp_scroll __ARGS((win_T *wp));
+  void command_height __ARGS((void));
+  void last_status __ARGS((int morewin));
+*** ../vim-7.3.607/src/window.c	2012-07-16 17:31:48.000000000 +0200
+--- src/window.c	2012-07-19 18:05:18.000000000 +0200
+***************
+*** 54,60 ****
+  static void frame_insert __ARGS((frame_T *before, frame_T *frp));
+  static void frame_remove __ARGS((frame_T *frp));
+  #ifdef FEAT_VERTSPLIT
+- static void win_new_width __ARGS((win_T *wp, int width));
+  static void win_goto_ver __ARGS((int up, long count));
+  static void win_goto_hor __ARGS((int left, long count));
+  #endif
+--- 54,59 ----
+***************
+*** 71,77 ****
+  
+  static win_T *win_alloc __ARGS((win_T *after, int hidden));
+  static void set_fraction __ARGS((win_T *wp));
+- static void win_new_height __ARGS((win_T *wp, int height));
+  
+  #define URL_SLASH	1		/* path_is_url() has found "://" */
+  #define URL_BACKSLASH	2		/* path_is_url() has found ":\\" */
+--- 70,75 ----
+***************
+*** 5557,5563 ****
+   * This takes care of the things inside the window, not what happens to the
+   * window position, the frame or to other windows.
+   */
+!     static void
+  win_new_height(wp, height)
+      win_T	*wp;
+      int		height;
+--- 5555,5561 ----
+   * This takes care of the things inside the window, not what happens to the
+   * window position, the frame or to other windows.
+   */
+!     void
+  win_new_height(wp, height)
+      win_T	*wp;
+      int		height;
+***************
+*** 5697,5703 ****
+  /*
+   * Set the width of a window.
+   */
+!     static void
+  win_new_width(wp, width)
+      win_T	*wp;
+      int		width;
+--- 5695,5701 ----
+  /*
+   * Set the width of a window.
+   */
+!     void
+  win_new_width(wp, width)
+      win_T	*wp;
+      int		width;
+*** ../vim-7.3.607/src/version.c	2012-07-19 17:39:01.000000000 +0200
+--- src/version.c	2012-07-19 17:53:37.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     608,
+  /**/
+
+-- 
+Although the scythe isn't pre-eminent among the weapons of war, anyone who
+has been on the wrong end of, say, a peasants' revolt will know that in
+skilled hands it is fearsome.
+					-- (Terry Pratchett, Mort)
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.609 b/source/ap/vim/patches/7.3.609
new file mode 100644
index 00000000..ed731f50
--- /dev/null
+++ b/source/ap/vim/patches/7.3.609
@@ -0,0 +1,251 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.609
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.609
+Problem:    File names in :checkpath! output are garbled.
+Solution:   Check for \zs in the pattern. (Lech Lorens)
+Files:	    src/search.c, src/testdir/test17.in, src/testdir/test17.ok
+
+
+*** ../vim-7.3.608/src/search.c	2012-07-19 17:18:21.000000000 +0200
+--- src/search.c	2012-07-25 13:33:08.000000000 +0200
+***************
+*** 4740,4756 ****
+  			 * Isolate the file name.
+  			 * Include the surrounding "" or <> if present.
+  			 */
+! 			for (p = incl_regmatch.endp[0]; !vim_isfilec(*p); p++)
+! 			    ;
+! 			for (i = 0; vim_isfilec(p[i]); i++)
+! 			    ;
+  			if (i == 0)
+  			{
+  			    /* Nothing found, use the rest of the line. */
+  			    p = incl_regmatch.endp[0];
+  			    i = (int)STRLEN(p);
+  			}
+! 			else
+  			{
+  			    if (p[-1] == '"' || p[-1] == '<')
+  			    {
+--- 4740,4772 ----
+  			 * Isolate the file name.
+  			 * Include the surrounding "" or <> if present.
+  			 */
+! 			if (inc_opt != NULL
+! 				   && strstr((char *)inc_opt, "\\zs") != NULL)
+! 			{
+! 			    /* pattern contains \zs, use the match */
+! 			    p = incl_regmatch.startp[0];
+! 			    i = (int)(incl_regmatch.endp[0]
+! 						   - incl_regmatch.startp[0]);
+! 			}
+! 			else
+! 			{
+! 			    /* find the file name after the end of the match */
+! 			    for (p = incl_regmatch.endp[0];
+! 						  *p && !vim_isfilec(*p); p++)
+! 				;
+! 			    for (i = 0; vim_isfilec(p[i]); i++)
+! 				;
+! 			}
+! 
+  			if (i == 0)
+  			{
+  			    /* Nothing found, use the rest of the line. */
+  			    p = incl_regmatch.endp[0];
+  			    i = (int)STRLEN(p);
+  			}
+! 			/* Avoid checking before the start of the line, can
+! 			 * happen if \zs appears in the regexp. */
+! 			else if (p > line)
+  			{
+  			    if (p[-1] == '"' || p[-1] == '<')
+  			    {
+*** ../vim-7.3.608/src/testdir/test17.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test17.in	2012-07-25 13:41:43.000000000 +0200
+***************
+*** 1,4 ****
+! Tests for "gf" on ${VAR}
+  
+  STARTTEST
+  :so small.vim
+--- 1,6 ----
+! Tests for:
+! - "gf" on ${VAR},
+! - ":checkpath!" with various 'include' settings.
+  
+  STARTTEST
+  :so small.vim
+***************
+*** 20,27 ****
+  :endif
+  gf
+  :w! test.out
+! :qa!
+  ENDTEST
+  
+  	${CDIR}/test17a.in
+  	$TDIR/test17a.in
+--- 22,120 ----
+  :endif
+  gf
+  :w! test.out
+! :brewind
+  ENDTEST
+  
+  	${CDIR}/test17a.in
+  	$TDIR/test17a.in
++ 
++ STARTTEST
++ :" check for 'include' without \zs or \ze
++ :lang C
++ :!rm -f ./Xbase.a
++ :!rm -rf ./Xdir1
++ :!mkdir -p Xdir1/dir2
++ :e Xdir1/dir2/foo.a
++ i#include   "bar.a"
++ :w
++ :e Xdir1/dir2/bar.a
++ i#include      "baz.a"
++ :w
++ :e Xdir1/dir2/baz.a
++ i#include            "foo.a"
++ :w
++ :e Xbase.a
++ :set path=Xdir1/dir2
++ i#include    <foo.a>
++ :w
++ :redir! >>test.out
++ :checkpath!
++ :redir END
++ :brewind
++ ENDTEST
++ 
++ STARTTEST
++ :" check for 'include' with \zs and \ze
++ :!rm -f ./Xbase.b
++ :!rm -rf ./Xdir1
++ :!mkdir -p Xdir1/dir2
++ :let &include='^\s*%inc\s*/\zs[^/]\+\ze'
++ :function! DotsToSlashes()
++ :  return substitute(v:fname, '\.', '/', 'g') . '.b'
++ :endfunction
++ :let &includeexpr='DotsToSlashes()'
++ :e Xdir1/dir2/foo.b
++ i%inc   /bar/
++ :w
++ :e Xdir1/dir2/bar.b
++ i%inc      /baz/
++ :w
++ :e Xdir1/dir2/baz.b
++ i%inc            /foo/
++ :w
++ :e Xbase.b
++ :set path=Xdir1/dir2
++ i%inc    /foo/
++ :w
++ :redir! >>test.out
++ :checkpath!
++ :redir END
++ :brewind
++ ENDTEST
++ 
++ STARTTEST
++ :" check for 'include' with \zs and no \ze
++ :!rm -f ./Xbase.c
++ :!rm -rf ./Xdir1
++ :!mkdir -p Xdir1/dir2
++ :let &include='^\s*%inc\s*\%([[:upper:]][^[:space:]]*\s\+\)\?\zs\S\+\ze'
++ :function! StripNewlineChar()
++ :  if v:fname =~ '\n$'
++ :    return v:fname[:-2]
++ :  endif
++ :  return v:fname
++ :endfunction
++ :let &includeexpr='StripNewlineChar()'
++ :e Xdir1/dir2/foo.c
++ i%inc   bar.c
++ :w
++ :e Xdir1/dir2/bar.c
++ i%inc      baz.c
++ :w
++ :e Xdir1/dir2/baz.c
++ i%inc            foo.c
++ :w
++ :e Xdir1/dir2/FALSE.c
++ i%inc            foo.c
++ :w
++ :e Xbase.c
++ :set path=Xdir1/dir2
++ i%inc    FALSE.c foo.c
++ :w
++ :redir! >>test.out
++ :checkpath!
++ :redir END
++ :brewind
++ :q
++ ENDTEST
++ 
+*** ../vim-7.3.608/src/testdir/test17.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test17.ok	2012-07-25 13:45:37.000000000 +0200
+***************
+*** 1,3 ****
+--- 1,33 ----
+  This file is just to test "gf" in test 17.
+  The contents is not important.
+  Just testing!
++ 
++ 
++ --- Included files in path ---
++ Xdir1/dir2/foo.a
++ Xdir1/dir2/foo.a -->
++   Xdir1/dir2/bar.a
++   Xdir1/dir2/bar.a -->
++     Xdir1/dir2/baz.a
++     Xdir1/dir2/baz.a -->
++       "foo.a"  (Already listed)
++ 
++ 
++ --- Included files in path ---
++ Xdir1/dir2/foo.b
++ Xdir1/dir2/foo.b -->
++   Xdir1/dir2/bar.b
++   Xdir1/dir2/bar.b -->
++     Xdir1/dir2/baz.b
++     Xdir1/dir2/baz.b -->
++       foo  (Already listed)
++ 
++ 
++ --- Included files in path ---
++ Xdir1/dir2/foo.c
++ Xdir1/dir2/foo.c -->
++   Xdir1/dir2/bar.c
++   Xdir1/dir2/bar.c -->
++     Xdir1/dir2/baz.c
++     Xdir1/dir2/baz.c -->
++       foo.c^@  (Already listed)
+*** ../vim-7.3.608/src/version.c	2012-07-19 18:05:40.000000000 +0200
+--- src/version.c	2012-07-25 13:38:54.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     609,
+  /**/
+
+-- 
+"The question of whether computers can think is just like the question
+of whether submarines can swim."      -- Edsger W. Dijkstra
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.610 b/source/ap/vim/patches/7.3.610
new file mode 100644
index 00000000..5e48837f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.610
@@ -0,0 +1,400 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.610
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.610
+Problem:    Cannot operate on the text that a search pattern matches.
+Solution:   Add the "gn" and "gN" commands. (Christian Brabandt)
+Files:	    runtime/doc/index.txt, runtime/doc/visual.txt, src/normal.c,
+	    src/proto/search.pro, src/search.c, src/testdir/test53.in,
+	    src/testdir/test53.ok
+
+
+*** ../vim-7.3.609/runtime/doc/index.txt	2010-08-15 21:57:18.000000000 +0200
+--- runtime/doc/index.txt	2012-07-25 14:27:20.000000000 +0200
+***************
+*** 719,726 ****
+--- 719,729 ----
+  |gH|		gH		   start Select line mode
+  |gI|		gI		2  like "I", but always start in column 1
+  |gJ|		gJ		2  join lines without inserting space
++ |gN|		gN	      1,2  find the previous match with the last used
++ 				   search pattern and Visually select it
+  |gP|		["x]gP		2  put the text [from register x] before the
+  				   cursor N times, leave the cursor after it
++ |gQ|		gQ		    switch to "Ex" mode with Vim editing
+  |gR|		gR		2  enter Virtual Replace mode
+  |gU|		gU{motion}	2  make Nmove text uppercase
+  |gV|		gV		   don't reselect the previous Visual area
+***************
+*** 750,755 ****
+--- 753,760 ----
+  				   lines down
+  |gk|		gk		1  like "k", but when 'wrap' on go N screen
+  				   lines up
++ |gn|		gn	      1,2  find the next match with the last used
++ 				   search pattern and Visually select it
+  |gm|		gm		1  go to character at middle of the screenline
+  |go|		go		1  cursor to byte N in the buffer
+  |gp|		["x]gp		2  put the text [from register x] after the
+*** ../vim-7.3.609/runtime/doc/visual.txt	2010-08-15 21:57:16.000000000 +0200
+--- runtime/doc/visual.txt	2012-07-25 14:42:22.000000000 +0200
+***************
+*** 94,99 ****
+--- 99,116 ----
+  			After using "p" or "P" in Visual mode the text that
+  			was put will be selected.
+  
++ 								*gn* *v_gn*
++ gn			Search forward for the last used search pattern, like
++ 			with `n`, and start Visual mode to select the match.
++ 			If the cursor is on the match, visually selects it.
++ 			If an operator is pending, operates on the match.
++ 			E.g., "dgn" deletes the text of the next match.
++ 			If Visual mode is active, extends the selection
++ 			until the end of the next match.
++ 
++ 								*gN* *v_gN*
++ gN			Like |gn| but searches backward, like with `N`.
++ 
+  							*<LeftMouse>*
+  <LeftMouse>		Set the current cursor position.  If Visual mode is
+  			active it is stopped.  Only when 'mouse' option is
+*** ../vim-7.3.609/src/normal.c	2012-07-10 16:49:08.000000000 +0200
+--- src/normal.c	2012-07-25 14:31:40.000000000 +0200
+***************
+*** 1780,1789 ****
+  	    {
+  		/* Prepare for redoing.  Only use the nchar field for "r",
+  		 * otherwise it might be the second char of the operator. */
+! 		prep_redo(oap->regname, 0L, NUL, 'v',
+! 				get_op_char(oap->op_type),
+! 				get_extra_op_char(oap->op_type),
+! 				oap->op_type == OP_REPLACE ? cap->nchar : NUL);
+  		if (!redo_VIsual_busy)
+  		{
+  		    redo_VIsual_mode = resel_VIsual_mode;
+--- 1780,1797 ----
+  	    {
+  		/* Prepare for redoing.  Only use the nchar field for "r",
+  		 * otherwise it might be the second char of the operator. */
+! 		if (cap->cmdchar == 'g' && (cap->nchar == 'n'
+! 							|| cap->nchar == 'N'))
+! 		    /* "gn" and "gN" are a bit different */
+! 		    prep_redo(oap->regname, 0L, NUL, cap->cmdchar, cap->nchar,
+! 					get_op_char(oap->op_type),
+! 					get_extra_op_char(oap->op_type));
+! 		else
+! 		    prep_redo(oap->regname, 0L, NUL, 'v',
+! 					get_op_char(oap->op_type),
+! 					get_extra_op_char(oap->op_type),
+! 					oap->op_type == OP_REPLACE
+! 							  ? cap->nchar : NUL);
+  		if (!redo_VIsual_busy)
+  		{
+  		    redo_VIsual_mode = resel_VIsual_mode;
+***************
+*** 7987,7992 ****
+--- 7995,8011 ----
+  	cap->arg = TRUE;
+  	nv_visual(cap);
+  	break;
++ 
++     /* "gn", "gN" visually select next/previous search match
++      * "gn" selects next match
++      * "gN" selects previous match
++      */
++     case 'N':
++     case 'n':
++ 	if (!current_search(cap->count1, cap->nchar == 'n'))
++ 	    beep_flush();
++ 
++ 	break;
+  #endif /* FEAT_VISUAL */
+  
+      /*
+*** ../vim-7.3.609/src/proto/search.pro	2010-08-15 21:57:28.000000000 +0200
+--- src/proto/search.pro	2012-07-25 14:24:01.000000000 +0200
+***************
+*** 27,32 ****
+--- 27,33 ----
+  int end_word __ARGS((long count, int bigword, int stop, int empty));
+  int bckend_word __ARGS((long count, int bigword, int eol));
+  int current_word __ARGS((oparg_T *oap, long count, int include, int bigword));
++ int current_search __ARGS((long count, int forward));
+  int current_sent __ARGS((oparg_T *oap, long count, int include));
+  int current_block __ARGS((oparg_T *oap, long count, int include, int what, int other));
+  int current_tagblock __ARGS((oparg_T *oap, long count_arg, int include));
+*** ../vim-7.3.609/src/search.c	2012-07-25 13:46:25.000000000 +0200
+--- src/search.c	2012-07-25 14:54:28.000000000 +0200
+***************
+*** 3397,3402 ****
+--- 3397,3547 ----
+      return OK;
+  }
+  
++ #if defined(FEAT_VISUAL) || defined(PROTO)
++ /*
++  * Find next search match under cursor, cursor at end.
++  * Used while an operator is pending, and in Visual mode.
++  * TODO: redo only works when used in operator pending mode
++  */
++     int
++ current_search(count, forward)
++     long	count;
++     int		forward;	/* move forward or backwards */
++ {
++     pos_T	start_pos;	/* position before the pattern */
++     pos_T	orig_pos;	/* position of the cursor at beginning */
++     pos_T	pos;		/* position after the pattern */
++     int		i;
++     int		dir;
++     int		result;		/* result of various function calls */
++     char_u	old_p_ws = p_ws;
++     int		visual_active = FALSE;
++     int		flags = 0;
++     pos_T	save_VIsual;
++ 
++ 
++     /* wrapping should not occur */
++     p_ws = FALSE;
++ 
++     /* Correct cursor when 'selection' is exclusive */
++     if (VIsual_active && *p_sel == 'e' && lt(VIsual, curwin->w_cursor))
++ 	dec_cursor();
++ 
++     if (VIsual_active)
++     {
++ 	orig_pos = curwin->w_cursor;
++ 	save_VIsual = VIsual;
++ 	visual_active = TRUE;
++ 
++ 	/* just started visual selection, only one character */
++ 	if (equalpos(VIsual, curwin->w_cursor))
++ 	    visual_active = FALSE;
++ 
++ 	pos = curwin->w_cursor;
++ 	start_pos = VIsual;
++ 
++ 	/* make sure, searching further will extend the match */
++ 	if (VIsual_active)
++ 	{
++ 	    if (forward)
++ 		incl(&pos);
++ 	    else
++ 		decl(&pos);
++ 	}
++     }
++     else
++ 	orig_pos = pos = start_pos = curwin->w_cursor;
++ 
++     /*
++      * The trick is to first search backwards and then search forward again,
++      * so that a match at the current cursor position will be correctly
++      * captured.
++      */
++     for (i = 0; i < 2; i++)
++     {
++ 	if (i && count == 1)
++ 	    flags = SEARCH_START;
++ 
++ 	if (forward)
++ 	    dir = i;
++ 	else
++ 	    dir = !i;
++ 	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
++ 		spats[last_idx].pat, (long) (i ? count : 1),
++ 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
++ 		RE_SEARCH, 0, NULL);
++ 
++ 	/* First search may fail, but then start searching from the
++ 	 * beginning of the file (cursor might be on the search match)
++ 	 * except when Visual mode is active, so that extending the visual
++ 	 * selection works. */
++ 	if (!result && i) /* not found, abort */
++ 	{
++ 	    curwin->w_cursor = orig_pos;
++ 	    if (VIsual_active)
++ 		VIsual = save_VIsual;
++ 	    p_ws = old_p_ws;
++ 	    return FAIL;
++ 	}
++ 	else if (!i && !result && !visual_active)
++ 	{
++ 	    if (forward) /* try again from start of buffer */
++ 	    {
++ 		clearpos(&pos);
++ 	    }
++ 	    else /* try again from end of buffer */
++ 	    {
++ 		/* searching backwards, so set pos to last line and col */
++ 		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
++ 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
++ 	    }
++ 	}
++ 
++     }
++ 
++     start_pos = pos;
++     flags = (forward ? SEARCH_END : 0);
++ 
++     /* move to match */
++     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
++ 	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
++ 
++     if (!VIsual_active)
++ 	VIsual = start_pos;
++ 
++     p_ws = old_p_ws;
++     curwin->w_cursor = pos;
++     VIsual_active = TRUE;
++     VIsual_mode = 'v';
++ 
++     if (VIsual_active)
++     {
++ 	redraw_curbuf_later(INVERTED);	/* update the inversion */
++ 	if (*p_sel == 'e' && ltoreq(VIsual, curwin->w_cursor))
++ 	    inc_cursor();
++     }
++ 
++ #ifdef FEAT_FOLDING
++     if (fdo_flags & FDO_SEARCH && KeyTyped)
++ 	foldOpenCursor();
++ #endif
++ 
++     may_start_select('c');
++ #ifdef FEAT_MOUSE
++     setmouse();
++ #endif
++ #ifdef FEAT_CLIPBOARD
++     /* Make sure the clipboard gets updated.  Needed because start and
++      * end are still the same, and the selection needs to be owned */
++     clip_star.vmode = NUL;
++ #endif
++     redraw_curbuf_later(INVERTED);
++     showmode();
++ 
++     return OK;
++ }
++ #endif /* FEAT_VISUAL */
++ 
+  /*
+   * Find sentence(s) under the cursor, cursor at end.
+   * When Visual active, extend it by one or more sentences.
+***************
+*** 3420,3426 ****
+  
+  #ifdef FEAT_VISUAL
+      /*
+!      * When visual area is bigger than one character: Extend it.
+       */
+      if (VIsual_active && !equalpos(start_pos, VIsual))
+      {
+--- 3565,3571 ----
+  
+  #ifdef FEAT_VISUAL
+      /*
+!      * When the Visual area is bigger than one character: Extend it.
+       */
+      if (VIsual_active && !equalpos(start_pos, VIsual))
+      {
+***************
+*** 3508,3515 ****
+  #endif
+  
+      /*
+!      * If cursor started on blank, check if it is just before the start of the
+!      * next sentence.
+       */
+      while (c = gchar_pos(&pos), vim_iswhite(c))	/* vim_iswhite() is a macro */
+  	incl(&pos);
+--- 3653,3660 ----
+  #endif
+  
+      /*
+!      * If the cursor started on a blank, check if it is just before the start
+!      * of the next sentence.
+       */
+      while (c = gchar_pos(&pos), vim_iswhite(c))	/* vim_iswhite() is a macro */
+  	incl(&pos);
+***************
+*** 3558,3564 ****
+  #ifdef FEAT_VISUAL
+      if (VIsual_active)
+      {
+! 	/* avoid getting stuck with "is" on a single space before a sent. */
+  	if (equalpos(start_pos, curwin->w_cursor))
+  	    goto extend;
+  	if (*p_sel == 'e')
+--- 3703,3709 ----
+  #ifdef FEAT_VISUAL
+      if (VIsual_active)
+      {
+! 	/* Avoid getting stuck with "is" on a single space before a sentence. */
+  	if (equalpos(start_pos, curwin->w_cursor))
+  	    goto extend;
+  	if (*p_sel == 'e')
+*** ../vim-7.3.609/src/testdir/test53.in	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test53.in	2012-07-25 15:01:34.000000000 +0200
+***************
+*** 28,33 ****
+--- 28,40 ----
+  :put =matchstr(\"abcd\", \".\", 0, -1) " a
+  :put =match(\"abcd\", \".\", 0, 5) " -1
+  :put =match(\"abcd\", \".\", 0, -1) " 0
++ /^foobar
++ gncsearchmatch/one\_s*two\_s
++ :1
++ gnd
++ /[a]bcdx
++ :1
++ 2gnd
+  :/^start:/,/^end:/wq! test.out
+  ENDTEST
+  
+***************
+*** 45,48 ****
+--- 52,60 ----
+  -<b>asdf<i>Xasdf</i>asdf</b>-
+  -<b>asdX<i>as<b />df</i>asdf</b>-
+  </begin>
++ SEARCH:
++ foobar
++ one
++ two
++ abcdx | abcdx | abcdx
+  end:
+*** ../vim-7.3.609/src/testdir/test53.ok	2010-08-15 21:57:29.000000000 +0200
+--- src/testdir/test53.ok	2012-07-25 14:24:01.000000000 +0200
+***************
+*** 18,21 ****
+--- 18,24 ----
+  a
+  -1
+  0
++ SEARCH:
++ searchmatch
++ abcdx |  | abcdx
+  end:
+*** ../vim-7.3.609/src/version.c	2012-07-25 13:46:25.000000000 +0200
+--- src/version.c	2012-07-25 15:03:43.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     610,
+  /**/
+
+-- 
+Did you ever see a "Hit any key to continue" message in a music piece?
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.611 b/source/ap/vim/patches/7.3.611
new file mode 100644
index 00000000..5e366a78
--- /dev/null
+++ b/source/ap/vim/patches/7.3.611
@@ -0,0 +1,58 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.611
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.611
+Problem:    Can't use Vim dictionary as self argument in Python.
+Solution:   Fix the check for the "self" argument. (ZyX)
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.610/src/if_py_both.h	2012-06-30 13:34:29.000000000 +0200
+--- src/if_py_both.h	2012-07-25 15:32:10.000000000 +0200
+***************
+*** 1284,1292 ****
+  	selfdictObject = PyDict_GetItemString(kwargs, "self");
+  	if (selfdictObject != NULL)
+  	{
+! 	    if (!PyDict_Check(selfdictObject))
+  	    {
+! 		PyErr_SetString(PyExc_TypeError, _("'self' argument must be a dictionary"));
+  		clear_tv(&args);
+  		return NULL;
+  	    }
+--- 1284,1293 ----
+  	selfdictObject = PyDict_GetItemString(kwargs, "self");
+  	if (selfdictObject != NULL)
+  	{
+! 	    if (!PyMapping_Check(selfdictObject))
+  	    {
+! 		PyErr_SetString(PyExc_TypeError,
+! 				   _("'self' argument must be a dictionary"));
+  		clear_tv(&args);
+  		return NULL;
+  	    }
+*** ../vim-7.3.610/src/version.c	2012-07-25 15:06:20.000000000 +0200
+--- src/version.c	2012-07-25 15:32:24.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     611,
+  /**/
+
+-- 
+In Joseph Heller's novel "Catch-22", the main character tries to get out of a
+war by proving he is crazy.  But the mere fact he wants to get out of the war
+only shows he isn't crazy -- creating the original "Catch-22".
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.612 b/source/ap/vim/patches/7.3.612
new file mode 100644
index 00000000..7b2207ed
--- /dev/null
+++ b/source/ap/vim/patches/7.3.612
@@ -0,0 +1,83 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.612
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.612
+Problem:    Auto formatting messes up text when 'fo' contains "2". (ZyX)
+Solution:   Decrement "less_cols". (Tor Perkins)
+Files:	    src/misc1.c, src/testdir/test68.in, src/testdir/test68.ok
+
+
+*** ../vim-7.3.611/src/misc1.c	2012-07-06 16:49:37.000000000 +0200
+--- src/misc1.c	2012-07-25 16:03:58.000000000 +0200
+***************
+*** 1329,1334 ****
+--- 1329,1335 ----
+  	    for (i = 0; i < padding; i++)
+  	    {
+  		STRCAT(leader, " ");
++ 		less_cols--;
+  		newcol++;
+  	    }
+  	}
+*** ../vim-7.3.611/src/testdir/test68.in	2012-06-29 15:04:34.000000000 +0200
+--- src/testdir/test68.in	2012-07-25 15:57:06.000000000 +0200
+***************
+*** 94,99 ****
+--- 94,109 ----
+  }
+  
+  STARTTEST
++ /mno pqr/
++ :setl tw=20 fo=an12wcq comments=s1:/*,mb:*,ex:*/
++ A vwx yz
++ ENDTEST
++ 
++ /* abc def ghi jkl 
++  *    mno pqr stu
++  */
++ 
++ STARTTEST
+  /^#/
+  :setl tw=12 fo=tqnc comments=:#
+  A foobar
+*** ../vim-7.3.611/src/testdir/test68.ok	2012-06-29 23:57:50.000000000 +0200
+--- src/testdir/test68.ok	2012-07-25 16:03:05.000000000 +0200
+***************
+*** 57,62 ****
+--- 57,68 ----
+  { 1aa ^^2bb }
+  
+  
++ /* abc def ghi jkl 
++  *    mno pqr stu 
++  *    vwx yz
++  */
++ 
++ 
+  # 1 xxxxx
+  #   foobar
+  
+*** ../vim-7.3.611/src/version.c	2012-07-25 15:36:00.000000000 +0200
+--- src/version.c	2012-07-25 16:08:02.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     612,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+169. You hire a housekeeper for your home page.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.613 b/source/ap/vim/patches/7.3.613
new file mode 100644
index 00000000..520e87c3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.613
@@ -0,0 +1,149 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.613
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.613
+Problem:    Including Python's config.c in the build causes trouble.  It is
+	    not clear why it was there.
+Solution:   Omit the config file. (James McCoy)
+Files:	    src/Makefile, src/auto/configure, src/configure.in
+
+
+*** ../vim-7.3.612/src/Makefile	2012-06-20 18:39:12.000000000 +0200
+--- src/Makefile	2012-07-25 16:22:57.000000000 +0200
+***************
+*** 2559,2577 ****
+  objects/if_perlsfio.o: if_perlsfio.c
+  	$(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c
+  
+- objects/py_config.o: $(PYTHON_CONFDIR)/config.c
+- 	$(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/config.c \
+- 		-I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
+- 
+  objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
+  	$(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \
+  		-I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
+  		$(PYTHON_GETPATH_CFLAGS)
+  
+- objects/py3_config.o: $(PYTHON3_CONFDIR)/config.c
+- 	$(CCC) $(PYTHON3_CFLAGS) -o $@ $(PYTHON3_CONFDIR)/config.c \
+- 		-I$(PYTHON3_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
+- 
+  objects/if_python.o: if_python.c if_py_both.h
+  	$(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c
+  
+--- 2559,2569 ----
+*** ../vim-7.3.612/src/auto/configure	2012-06-13 19:19:36.000000000 +0200
+--- src/auto/configure	2012-07-25 16:23:49.000000000 +0200
+***************
+*** 5357,5367 ****
+  	  PYTHON_CFLAGS="-I${vi_cv_path_python_pfx}/include/python${vi_cv_var_python_version} -I${vi_cv_path_python_epfx}/include/python${vi_cv_var_python_version} -DPYTHON_HOME=\\\"${vi_cv_path_python_pfx}\\\""
+  	fi
+  	PYTHON_SRC="if_python.c"
+! 		if test "x$MACOSX" = "xyes"; then
+! 	  PYTHON_OBJ="objects/if_python.o"
+! 	else
+! 	  PYTHON_OBJ="objects/if_python.o objects/py_config.o"
+! 	fi
+  	if test "${vi_cv_var_python_version}" = "1.4"; then
+  	   PYTHON_OBJ="$PYTHON_OBJ objects/py_getpath.o"
+  	fi
+--- 5357,5363 ----
+  	  PYTHON_CFLAGS="-I${vi_cv_path_python_pfx}/include/python${vi_cv_var_python_version} -I${vi_cv_path_python_epfx}/include/python${vi_cv_var_python_version} -DPYTHON_HOME=\\\"${vi_cv_path_python_pfx}\\\""
+  	fi
+  	PYTHON_SRC="if_python.c"
+! 	PYTHON_OBJ="objects/if_python.o"
+  	if test "${vi_cv_var_python_version}" = "1.4"; then
+  	   PYTHON_OBJ="$PYTHON_OBJ objects/py_getpath.o"
+  	fi
+***************
+*** 5656,5666 ****
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+!             if test "x$MACOSX" = "xyes"; then
+!         PYTHON3_OBJ="objects/if_python3.o"
+!       else
+!         PYTHON3_OBJ="objects/if_python3.o objects/py3_config.o"
+!       fi
+  
+                                                  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -pthread should be used" >&5
+  $as_echo_n "checking if -pthread should be used... " >&6; }
+--- 5652,5658 ----
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+!       PYTHON3_OBJ="objects/if_python3.o"
+  
+                                                  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -pthread should be used" >&5
+  $as_echo_n "checking if -pthread should be used... " >&6; }
+*** ../vim-7.3.612/src/configure.in	2012-06-13 19:19:36.000000000 +0200
+--- src/configure.in	2012-07-25 16:23:41.000000000 +0200
+***************
+*** 916,927 ****
+  	  PYTHON_CFLAGS="-I${vi_cv_path_python_pfx}/include/python${vi_cv_var_python_version} -I${vi_cv_path_python_epfx}/include/python${vi_cv_var_python_version} -DPYTHON_HOME=\\\"${vi_cv_path_python_pfx}\\\""
+  	fi
+  	PYTHON_SRC="if_python.c"
+! 	dnl For Mac OSX 10.2 config.o is included in the Python library.
+! 	if test "x$MACOSX" = "xyes"; then
+! 	  PYTHON_OBJ="objects/if_python.o"
+! 	else
+! 	  PYTHON_OBJ="objects/if_python.o objects/py_config.o"
+! 	fi
+  	if test "${vi_cv_var_python_version}" = "1.4"; then
+  	   PYTHON_OBJ="$PYTHON_OBJ objects/py_getpath.o"
+  	fi
+--- 916,922 ----
+  	  PYTHON_CFLAGS="-I${vi_cv_path_python_pfx}/include/python${vi_cv_var_python_version} -I${vi_cv_path_python_epfx}/include/python${vi_cv_var_python_version} -DPYTHON_HOME=\\\"${vi_cv_path_python_pfx}\\\""
+  	fi
+  	PYTHON_SRC="if_python.c"
+! 	PYTHON_OBJ="objects/if_python.o"
+  	if test "${vi_cv_var_python_version}" = "1.4"; then
+  	   PYTHON_OBJ="$PYTHON_OBJ objects/py_getpath.o"
+  	fi
+***************
+*** 1106,1117 ****
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+!       dnl For Mac OSX 10.2 config.o is included in the Python library.
+!       if test "x$MACOSX" = "xyes"; then
+!         PYTHON3_OBJ="objects/if_python3.o"
+!       else
+!         PYTHON3_OBJ="objects/if_python3.o objects/py3_config.o"
+!       fi
+  
+        dnl On FreeBSD linking with "-pthread" is required to use threads.
+        dnl _THREAD_SAFE must be used for compiling then.
+--- 1101,1107 ----
+          PYTHON3_CFLAGS="-I${vi_cv_path_python3_pfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -I${vi_cv_path_python3_epfx}/include/python${vi_cv_var_python3_version}${vi_cv_var_python3_abiflags} -DPYTHON3_HOME=L\\\"${vi_cv_path_python3_pfx}\\\""
+        fi
+        PYTHON3_SRC="if_python3.c"
+!       PYTHON3_OBJ="objects/if_python3.o"
+  
+        dnl On FreeBSD linking with "-pthread" is required to use threads.
+        dnl _THREAD_SAFE must be used for compiling then.
+*** ../vim-7.3.612/src/version.c	2012-07-25 16:09:59.000000000 +0200
+--- src/version.c	2012-07-25 16:29:52.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     613,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+170. You introduce your wife as "my_lady@home.wife" and refer to your
+     children as "forked processes."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.614 b/source/ap/vim/patches/7.3.614
new file mode 100644
index 00000000..87d7a451
--- /dev/null
+++ b/source/ap/vim/patches/7.3.614
@@ -0,0 +1,176 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.614
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.614
+Problem:    Number argument gets turned into a number while it should be a
+	    string.
+Solution:   Add flag to the call_vim_function() call. (Yasuhiro Matsumoto)
+Files:	    src/edit.c, src/eval.c, src/proto/eval.pro
+
+
+*** ../vim-7.3.613/src/edit.c	2012-07-10 17:14:50.000000000 +0200
+--- src/edit.c	2012-07-25 16:40:07.000000000 +0200
+***************
+*** 3959,3965 ****
+      curbuf_save = curbuf;
+  
+      /* Call a function, which returns a list or dict. */
+!     if (call_vim_function(funcname, 2, args, FALSE, &rettv) == OK)
+      {
+  	switch (rettv.v_type)
+  	{
+--- 3959,3965 ----
+      curbuf_save = curbuf;
+  
+      /* Call a function, which returns a list or dict. */
+!     if (call_vim_function(funcname, 2, args, FALSE, FALSE, &rettv) == OK)
+      {
+  	switch (rettv.v_type)
+  	{
+*** ../vim-7.3.613/src/eval.c	2012-07-19 18:05:40.000000000 +0200
+--- src/eval.c	2012-07-25 16:42:41.000000000 +0200
+***************
+*** 1564,1574 ****
+   * Returns OK or FAIL.
+   */
+      int
+! call_vim_function(func, argc, argv, safe, rettv)
+      char_u      *func;
+      int		argc;
+      char_u      **argv;
+      int		safe;		/* use the sandbox */
+      typval_T	*rettv;
+  {
+      typval_T	*argvars;
+--- 1564,1575 ----
+   * Returns OK or FAIL.
+   */
+      int
+! call_vim_function(func, argc, argv, safe, str_arg_only, rettv)
+      char_u      *func;
+      int		argc;
+      char_u      **argv;
+      int		safe;		/* use the sandbox */
++     int		str_arg_only;	/* all arguments are strings */
+      typval_T	*rettv;
+  {
+      typval_T	*argvars;
+***************
+*** 1593,1600 ****
+  	    continue;
+  	}
+  
+! 	/* Recognize a number argument, the others must be strings. */
+! 	vim_str2nr(argv[i], NULL, &len, TRUE, TRUE, &n, NULL);
+  	if (len != 0 && len == (int)STRLEN(argv[i]))
+  	{
+  	    argvars[i].v_type = VAR_NUMBER;
+--- 1594,1604 ----
+  	    continue;
+  	}
+  
+! 	if (str_arg_only)
+! 	    len = 0;
+! 	else
+! 	    /* Recognize a number argument, the others must be strings. */
+! 	    vim_str2nr(argv[i], NULL, &len, TRUE, TRUE, &n, NULL);
+  	if (len != 0 && len == (int)STRLEN(argv[i]))
+  	{
+  	    argvars[i].v_type = VAR_NUMBER;
+***************
+*** 1646,1652 ****
+      typval_T	rettv;
+      char_u	*retval;
+  
+!     if (call_vim_function(func, argc, argv, safe, &rettv) == FAIL)
+  	return NULL;
+  
+      retval = vim_strsave(get_tv_string(&rettv));
+--- 1650,1657 ----
+      typval_T	rettv;
+      char_u	*retval;
+  
+!     /* All arguments are passed as strings, no conversion to number. */
+!     if (call_vim_function(func, argc, argv, safe, TRUE, &rettv) == FAIL)
+  	return NULL;
+  
+      retval = vim_strsave(get_tv_string(&rettv));
+***************
+*** 1671,1677 ****
+      typval_T	rettv;
+      long	retval;
+  
+!     if (call_vim_function(func, argc, argv, safe, &rettv) == FAIL)
+  	return -1;
+  
+      retval = get_tv_number_chk(&rettv, NULL);
+--- 1676,1683 ----
+      typval_T	rettv;
+      long	retval;
+  
+!     /* All arguments are passed as strings, no conversion to number. */
+!     if (call_vim_function(func, argc, argv, safe, TRUE, &rettv) == FAIL)
+  	return -1;
+  
+      retval = get_tv_number_chk(&rettv, NULL);
+***************
+*** 1694,1700 ****
+  {
+      typval_T	rettv;
+  
+!     if (call_vim_function(func, argc, argv, safe, &rettv) == FAIL)
+  	return NULL;
+  
+      if (rettv.v_type != VAR_LIST)
+--- 1700,1707 ----
+  {
+      typval_T	rettv;
+  
+!     /* All arguments are passed as strings, no conversion to number. */
+!     if (call_vim_function(func, argc, argv, safe, TRUE, &rettv) == FAIL)
+  	return NULL;
+  
+      if (rettv.v_type != VAR_LIST)
+*** ../vim-7.3.613/src/proto/eval.pro	2012-07-16 17:31:48.000000000 +0200
+--- src/proto/eval.pro	2012-07-25 16:42:59.000000000 +0200
+***************
+*** 23,29 ****
+  list_T *eval_spell_expr __ARGS((char_u *badword, char_u *expr));
+  int get_spellword __ARGS((list_T *list, char_u **pp));
+  typval_T *eval_expr __ARGS((char_u *arg, char_u **nextcmd));
+! int call_vim_function __ARGS((char_u *func, int argc, char_u **argv, int safe, typval_T *rettv));
+  void *call_func_retstr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  long call_func_retnr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  void *call_func_retlist __ARGS((char_u *func, int argc, char_u **argv, int safe));
+--- 23,29 ----
+  list_T *eval_spell_expr __ARGS((char_u *badword, char_u *expr));
+  int get_spellword __ARGS((list_T *list, char_u **pp));
+  typval_T *eval_expr __ARGS((char_u *arg, char_u **nextcmd));
+! int call_vim_function __ARGS((char_u *func, int argc, char_u **argv, int safe, int str_arg_only, typval_T *rettv));
+  void *call_func_retstr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  long call_func_retnr __ARGS((char_u *func, int argc, char_u **argv, int safe));
+  void *call_func_retlist __ARGS((char_u *func, int argc, char_u **argv, int safe));
+*** ../vim-7.3.613/src/version.c	2012-07-25 16:32:03.000000000 +0200
+--- src/version.c	2012-07-25 16:46:11.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     614,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+171. You invent another person and chat with yourself in empty chat rooms.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.615 b/source/ap/vim/patches/7.3.615
new file mode 100644
index 00000000..96f6885f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.615
@@ -0,0 +1,107 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.615
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.615
+Problem:    Completion for a user command does not recognize backslash before
+	    a space.
+Solution:   Recognize escaped characters. (Yasuhiro Matsumoto)
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.614/src/ex_docmd.c	2012-07-10 19:25:06.000000000 +0200
+--- src/ex_docmd.c	2012-07-25 17:10:16.000000000 +0200
+***************
+*** 3390,3401 ****
+  	return NULL;
+  
+      /* Find start of last argument (argument just before cursor): */
+!     p = buff + STRLEN(buff);
+!     while (p != arg && *p != ' ' && *p != TAB)
+! 	p--;
+!     if (*p == ' ' || *p == TAB)
+! 	p++;
+      xp->xp_pattern = p;
+  
+      if (ea.argt & XFILE)
+      {
+--- 3390,3412 ----
+  	return NULL;
+  
+      /* Find start of last argument (argument just before cursor): */
+!     p = buff;
+      xp->xp_pattern = p;
++     len = STRLEN(buff);
++     while (*p && p < buff + len)
++     {
++ 	if (*p == ' ' || *p == TAB)
++ 	{
++ 	    /* argument starts after a space */
++ 	    xp->xp_pattern = ++p;
++ 	}
++ 	else
++ 	{
++ 	    if (*p == '\\' && *(p + 1) != NUL)
++ 		++p; /* skip over escaped character */
++ 	    mb_ptr_adv(p);
++ 	}
++     }
+  
+      if (ea.argt & XFILE)
+      {
+***************
+*** 3821,3828 ****
+  		    if (compl == EXPAND_MAPPINGS)
+  			return set_context_in_map_cmd(xp, (char_u *)"map",
+  					 arg, forceit, FALSE, FALSE, CMD_map);
+! 		    while ((xp->xp_pattern = vim_strchr(arg, ' ')) != NULL)
+! 			arg = xp->xp_pattern + 1;
+  		    xp->xp_pattern = arg;
+  		}
+  		xp->xp_context = compl;
+--- 3832,3853 ----
+  		    if (compl == EXPAND_MAPPINGS)
+  			return set_context_in_map_cmd(xp, (char_u *)"map",
+  					 arg, forceit, FALSE, FALSE, CMD_map);
+! 		    /* Find start of last argument. */
+! 		    p = arg;
+! 		    while (*p)
+! 		    {
+! 			if (*p == ' ')
+! 			{
+! 			    /* argument starts after a space */
+! 			    arg = p + 1;
+! 			}
+! 			else
+! 			{
+! 			    if (*p == '\\' && *(p + 1) != NUL)
+! 				++p; /* skip over escaped character */
+! 			    mb_ptr_adv(p);
+! 			}
+! 		    }
+  		    xp->xp_pattern = arg;
+  		}
+  		xp->xp_context = compl;
+*** ../vim-7.3.614/src/version.c	2012-07-25 16:46:59.000000000 +0200
+--- src/version.c	2012-07-25 17:17:05.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     615,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+172. You join listservers just for the extra e-mail.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.616 b/source/ap/vim/patches/7.3.616
new file mode 100644
index 00000000..5898eafe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.616
@@ -0,0 +1,46 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.616
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.616 (after 7.3.610)
+Problem:    Can't compile without +visual.
+Solution:   Add #ifdef.
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.615/src/normal.c	2012-07-25 15:06:20.000000000 +0200
+--- src/normal.c	2012-07-27 20:52:01.000000000 +0200
+***************
+*** 8002,8008 ****
+--- 8002,8010 ----
+       */
+      case 'N':
+      case 'n':
++ #ifdef FEAT_VISUAL
+  	if (!current_search(cap->count1, cap->nchar == 'n'))
++ #endif
+  	    beep_flush();
+  
+  	break;
+*** ../vim-7.3.615/src/version.c	2012-07-25 17:22:17.000000000 +0200
+--- src/version.c	2012-07-27 20:52:58.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     616,
+  /**/
+
+-- 
+The CIA drives around in cars with the "Intel inside" logo.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.617 b/source/ap/vim/patches/7.3.617
new file mode 100644
index 00000000..48062cd2
--- /dev/null
+++ b/source/ap/vim/patches/7.3.617
@@ -0,0 +1,65 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.617
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.617 (after 7.3.615)
+Problem:    Hang on completion.
+Solution:   Skip over the space. (Yasuhiro Matsumoto)
+Files:	    src/ex_docmd.c
+
+
+*** ../vim-7.3.616/src/ex_docmd.c	2012-07-25 17:22:17.000000000 +0200
+--- src/ex_docmd.c	2012-07-27 21:07:42.000000000 +0200
+***************
+*** 3837,3852 ****
+  		    while (*p)
+  		    {
+  			if (*p == ' ')
+- 			{
+  			    /* argument starts after a space */
+  			    arg = p + 1;
+! 			}
+! 			else
+! 			{
+! 			    if (*p == '\\' && *(p + 1) != NUL)
+! 				++p; /* skip over escaped character */
+! 			    mb_ptr_adv(p);
+! 			}
+  		    }
+  		    xp->xp_pattern = arg;
+  		}
+--- 3837,3847 ----
+  		    while (*p)
+  		    {
+  			if (*p == ' ')
+  			    /* argument starts after a space */
+  			    arg = p + 1;
+! 			else if (*p == '\\' && *(p + 1) != NUL)
+! 			    ++p; /* skip over escaped character */
+! 			mb_ptr_adv(p);
+  		    }
+  		    xp->xp_pattern = arg;
+  		}
+*** ../vim-7.3.616/src/version.c	2012-07-27 21:05:51.000000000 +0200
+--- src/version.c	2012-07-27 21:08:31.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     617,
+  /**/
+
+-- 
+If Microsoft would build a car...
+... You'd have to press the "Start" button to turn the engine off.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.618 b/source/ap/vim/patches/7.3.618
new file mode 100644
index 00000000..d0cc9c68
--- /dev/null
+++ b/source/ap/vim/patches/7.3.618
@@ -0,0 +1,367 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.618
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.618 (after 7.3.616)
+Problem:    Still doesn't compile with small features.
+Solution:   Move current_search() out of #ifdef. (Dominique Pelle)
+Files:	    src/normal.c, src/search.c
+
+
+*** ../vim-7.3.617/src/normal.c	2012-07-27 21:05:51.000000000 +0200
+--- src/normal.c	2012-07-28 13:34:13.000000000 +0200
+***************
+*** 7995,8000 ****
+--- 7995,8001 ----
+  	cap->arg = TRUE;
+  	nv_visual(cap);
+  	break;
++ #endif /* FEAT_VISUAL */
+  
+      /* "gn", "gN" visually select next/previous search match
+       * "gn" selects next match
+***************
+*** 8006,8014 ****
+  	if (!current_search(cap->count1, cap->nchar == 'n'))
+  #endif
+  	    beep_flush();
+- 
+  	break;
+- #endif /* FEAT_VISUAL */
+  
+      /*
+       * "gj" and "gk" two new funny movement keys -- up and down
+--- 8007,8013 ----
+*** ../vim-7.3.617/src/search.c	2012-07-25 15:06:20.000000000 +0200
+--- src/search.c	2012-07-28 13:37:19.000000000 +0200
+***************
+*** 3397,3547 ****
+      return OK;
+  }
+  
+- #if defined(FEAT_VISUAL) || defined(PROTO)
+- /*
+-  * Find next search match under cursor, cursor at end.
+-  * Used while an operator is pending, and in Visual mode.
+-  * TODO: redo only works when used in operator pending mode
+-  */
+-     int
+- current_search(count, forward)
+-     long	count;
+-     int		forward;	/* move forward or backwards */
+- {
+-     pos_T	start_pos;	/* position before the pattern */
+-     pos_T	orig_pos;	/* position of the cursor at beginning */
+-     pos_T	pos;		/* position after the pattern */
+-     int		i;
+-     int		dir;
+-     int		result;		/* result of various function calls */
+-     char_u	old_p_ws = p_ws;
+-     int		visual_active = FALSE;
+-     int		flags = 0;
+-     pos_T	save_VIsual;
+- 
+- 
+-     /* wrapping should not occur */
+-     p_ws = FALSE;
+- 
+-     /* Correct cursor when 'selection' is exclusive */
+-     if (VIsual_active && *p_sel == 'e' && lt(VIsual, curwin->w_cursor))
+- 	dec_cursor();
+- 
+-     if (VIsual_active)
+-     {
+- 	orig_pos = curwin->w_cursor;
+- 	save_VIsual = VIsual;
+- 	visual_active = TRUE;
+- 
+- 	/* just started visual selection, only one character */
+- 	if (equalpos(VIsual, curwin->w_cursor))
+- 	    visual_active = FALSE;
+- 
+- 	pos = curwin->w_cursor;
+- 	start_pos = VIsual;
+- 
+- 	/* make sure, searching further will extend the match */
+- 	if (VIsual_active)
+- 	{
+- 	    if (forward)
+- 		incl(&pos);
+- 	    else
+- 		decl(&pos);
+- 	}
+-     }
+-     else
+- 	orig_pos = pos = start_pos = curwin->w_cursor;
+- 
+-     /*
+-      * The trick is to first search backwards and then search forward again,
+-      * so that a match at the current cursor position will be correctly
+-      * captured.
+-      */
+-     for (i = 0; i < 2; i++)
+-     {
+- 	if (i && count == 1)
+- 	    flags = SEARCH_START;
+- 
+- 	if (forward)
+- 	    dir = i;
+- 	else
+- 	    dir = !i;
+- 	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
+- 		spats[last_idx].pat, (long) (i ? count : 1),
+- 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
+- 		RE_SEARCH, 0, NULL);
+- 
+- 	/* First search may fail, but then start searching from the
+- 	 * beginning of the file (cursor might be on the search match)
+- 	 * except when Visual mode is active, so that extending the visual
+- 	 * selection works. */
+- 	if (!result && i) /* not found, abort */
+- 	{
+- 	    curwin->w_cursor = orig_pos;
+- 	    if (VIsual_active)
+- 		VIsual = save_VIsual;
+- 	    p_ws = old_p_ws;
+- 	    return FAIL;
+- 	}
+- 	else if (!i && !result && !visual_active)
+- 	{
+- 	    if (forward) /* try again from start of buffer */
+- 	    {
+- 		clearpos(&pos);
+- 	    }
+- 	    else /* try again from end of buffer */
+- 	    {
+- 		/* searching backwards, so set pos to last line and col */
+- 		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
+- 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
+- 	    }
+- 	}
+- 
+-     }
+- 
+-     start_pos = pos;
+-     flags = (forward ? SEARCH_END : 0);
+- 
+-     /* move to match */
+-     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
+- 	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
+- 
+-     if (!VIsual_active)
+- 	VIsual = start_pos;
+- 
+-     p_ws = old_p_ws;
+-     curwin->w_cursor = pos;
+-     VIsual_active = TRUE;
+-     VIsual_mode = 'v';
+- 
+-     if (VIsual_active)
+-     {
+- 	redraw_curbuf_later(INVERTED);	/* update the inversion */
+- 	if (*p_sel == 'e' && ltoreq(VIsual, curwin->w_cursor))
+- 	    inc_cursor();
+-     }
+- 
+- #ifdef FEAT_FOLDING
+-     if (fdo_flags & FDO_SEARCH && KeyTyped)
+- 	foldOpenCursor();
+- #endif
+- 
+-     may_start_select('c');
+- #ifdef FEAT_MOUSE
+-     setmouse();
+- #endif
+- #ifdef FEAT_CLIPBOARD
+-     /* Make sure the clipboard gets updated.  Needed because start and
+-      * end are still the same, and the selection needs to be owned */
+-     clip_star.vmode = NUL;
+- #endif
+-     redraw_curbuf_later(INVERTED);
+-     showmode();
+- 
+-     return OK;
+- }
+- #endif /* FEAT_VISUAL */
+- 
+  /*
+   * Find sentence(s) under the cursor, cursor at end.
+   * When Visual active, extend it by one or more sentences.
+--- 3397,3402 ----
+***************
+*** 4670,4675 ****
+--- 4525,4675 ----
+  
+  #endif /* FEAT_TEXTOBJ */
+  
++ #if defined(FEAT_VISUAL) || defined(PROTO)
++ /*
++  * Find next search match under cursor, cursor at end.
++  * Used while an operator is pending, and in Visual mode.
++  * TODO: redo only works when used in operator pending mode
++  */
++     int
++ current_search(count, forward)
++     long	count;
++     int		forward;	/* move forward or backwards */
++ {
++     pos_T	start_pos;	/* position before the pattern */
++     pos_T	orig_pos;	/* position of the cursor at beginning */
++     pos_T	pos;		/* position after the pattern */
++     int		i;
++     int		dir;
++     int		result;		/* result of various function calls */
++     char_u	old_p_ws = p_ws;
++     int		visual_active = FALSE;
++     int		flags = 0;
++     pos_T	save_VIsual;
++ 
++ 
++     /* wrapping should not occur */
++     p_ws = FALSE;
++ 
++     /* Correct cursor when 'selection' is exclusive */
++     if (VIsual_active && *p_sel == 'e' && lt(VIsual, curwin->w_cursor))
++ 	dec_cursor();
++ 
++     if (VIsual_active)
++     {
++ 	orig_pos = curwin->w_cursor;
++ 	save_VIsual = VIsual;
++ 	visual_active = TRUE;
++ 
++ 	/* just started visual selection, only one character */
++ 	if (equalpos(VIsual, curwin->w_cursor))
++ 	    visual_active = FALSE;
++ 
++ 	pos = curwin->w_cursor;
++ 	start_pos = VIsual;
++ 
++ 	/* make sure, searching further will extend the match */
++ 	if (VIsual_active)
++ 	{
++ 	    if (forward)
++ 		incl(&pos);
++ 	    else
++ 		decl(&pos);
++ 	}
++     }
++     else
++ 	orig_pos = pos = start_pos = curwin->w_cursor;
++ 
++     /*
++      * The trick is to first search backwards and then search forward again,
++      * so that a match at the current cursor position will be correctly
++      * captured.
++      */
++     for (i = 0; i < 2; i++)
++     {
++ 	if (i && count == 1)
++ 	    flags = SEARCH_START;
++ 
++ 	if (forward)
++ 	    dir = i;
++ 	else
++ 	    dir = !i;
++ 	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
++ 		spats[last_idx].pat, (long) (i ? count : 1),
++ 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
++ 		RE_SEARCH, 0, NULL);
++ 
++ 	/* First search may fail, but then start searching from the
++ 	 * beginning of the file (cursor might be on the search match)
++ 	 * except when Visual mode is active, so that extending the visual
++ 	 * selection works. */
++ 	if (!result && i) /* not found, abort */
++ 	{
++ 	    curwin->w_cursor = orig_pos;
++ 	    if (VIsual_active)
++ 		VIsual = save_VIsual;
++ 	    p_ws = old_p_ws;
++ 	    return FAIL;
++ 	}
++ 	else if (!i && !result && !visual_active)
++ 	{
++ 	    if (forward) /* try again from start of buffer */
++ 	    {
++ 		clearpos(&pos);
++ 	    }
++ 	    else /* try again from end of buffer */
++ 	    {
++ 		/* searching backwards, so set pos to last line and col */
++ 		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
++ 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
++ 	    }
++ 	}
++ 
++     }
++ 
++     start_pos = pos;
++     flags = (forward ? SEARCH_END : 0);
++ 
++     /* move to match */
++     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
++ 	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
++ 
++     if (!VIsual_active)
++ 	VIsual = start_pos;
++ 
++     p_ws = old_p_ws;
++     curwin->w_cursor = pos;
++     VIsual_active = TRUE;
++     VIsual_mode = 'v';
++ 
++     if (VIsual_active)
++     {
++ 	redraw_curbuf_later(INVERTED);	/* update the inversion */
++ 	if (*p_sel == 'e' && ltoreq(VIsual, curwin->w_cursor))
++ 	    inc_cursor();
++     }
++ 
++ #ifdef FEAT_FOLDING
++     if (fdo_flags & FDO_SEARCH && KeyTyped)
++ 	foldOpenCursor();
++ #endif
++ 
++     may_start_select('c');
++ #ifdef FEAT_MOUSE
++     setmouse();
++ #endif
++ #ifdef FEAT_CLIPBOARD
++     /* Make sure the clipboard gets updated.  Needed because start and
++      * end are still the same, and the selection needs to be owned */
++     clip_star.vmode = NUL;
++ #endif
++     redraw_curbuf_later(INVERTED);
++     showmode();
++ 
++     return OK;
++ }
++ #endif /* FEAT_VISUAL */
++ 
+  #if defined(FEAT_LISP) || defined(FEAT_CINDENT) || defined(FEAT_TEXTOBJ) \
+  	|| defined(PROTO)
+  /*
+*** ../vim-7.3.617/src/version.c	2012-07-27 21:12:03.000000000 +0200
+--- src/version.c	2012-07-29 12:54:29.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     618,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+185. You order fast food over the Internet
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.619 b/source/ap/vim/patches/7.3.619
new file mode 100644
index 00000000..1fedcc78
--- /dev/null
+++ b/source/ap/vim/patches/7.3.619
@@ -0,0 +1,50 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.619
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.619
+Problem:    When executing a shell command Vim may become slow to respond.
+Solution:   Don't wait after every processed message. (idea by Yasuhiro
+	    Matsumoto)
+Files:	    src/os_win32.c
+
+
+*** ../vim-7.3.618/src/os_win32.c	2012-07-19 11:37:22.000000000 +0200
+--- src/os_win32.c	2012-08-02 12:30:52.000000000 +0200
+***************
+*** 3319,3324 ****
+--- 3319,3326 ----
+  	    {
+  		TranslateMessage(&msg);
+  		pDispatchMessage(&msg);
++ 		delay = 1;
++ 		continue;
+  	    }
+  	    if (WaitForSingleObject(pi.hProcess, delay) != WAIT_TIMEOUT)
+  		break;
+*** ../vim-7.3.618/src/version.c	2012-07-29 12:55:21.000000000 +0200
+--- src/version.c	2012-08-02 12:29:08.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     619,
+  /**/
+
+-- 
+Some of the well know MS-Windows errors:
+	EMULTI		Multitasking attempted, system confused
+	EKEYBOARD	Keyboard locked, try getting out of this one!
+	EXPLAIN		Unexplained error, please tell us what happened
+	EFUTURE		Reserved for our future mistakes
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.620 b/source/ap/vim/patches/7.3.620
new file mode 100644
index 00000000..5890f15f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.620
@@ -0,0 +1,163 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.620
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.620
+Problem:    Building with recent Ruby on Win32 doesn't work.
+Solution:   Add a separate argument for the API version. (Yasuhiro Matsumoto)
+Files:	    src/Make_ming.mak, src/Make_mvc.mak
+
+
+*** ../vim-7.3.619/src/Make_ming.mak	2012-07-06 13:40:44.000000000 +0200
+--- src/Make_ming.mak	2012-08-02 17:02:34.000000000 +0200
+***************
+*** 260,266 ****
+  #	  DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically)
+  #	  RUBY_VER=[Ruby version, eg 16, 17] (default is 16)
+  #	  RUBY_VER_LONG=[Ruby version, eg 1.6, 1.7] (default is 1.6)
+! #	    You must set RUBY_VER_LONG when change RUBY_VER.
+  #RUBY=c:/ruby
+  ifdef RUBY
+  ifndef DYNAMIC_RUBY
+--- 260,268 ----
+  #	  DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically)
+  #	  RUBY_VER=[Ruby version, eg 16, 17] (default is 16)
+  #	  RUBY_VER_LONG=[Ruby version, eg 1.6, 1.7] (default is 1.6)
+! #	    You must set RUBY_VER_LONG when changing RUBY_VER.
+! #	    You must set RUBY_API_VER version to RUBY_VER_LONG.
+! #	    Don't set ruby API version to RUBY_VER like 191.
+  #RUBY=c:/ruby
+  ifdef RUBY
+  ifndef DYNAMIC_RUBY
+***************
+*** 273,278 ****
+--- 275,283 ----
+  ifndef RUBY_VER_LONG
+  RUBY_VER_LONG = 1.6
+  endif
++ ifndef RUBY_API_VER
++ RUBY_API_VER = $(subst .,,$(RUBY_VER_LONG))
++ endif
+  
+  ifndef RUBY_PLATFORM
+  ifeq ($(RUBY_VER), 16)
+***************
+*** 288,296 ****
+  
+  ifndef RUBY_INSTALL_NAME
+  ifeq ($(RUBY_VER), 16)
+! RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_VER)
+  else
+! RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_VER)
+  endif
+  endif
+  
+--- 293,301 ----
+  
+  ifndef RUBY_INSTALL_NAME
+  ifeq ($(RUBY_VER), 16)
+! RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER)
+  else
+! RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_API_VER)
+  endif
+  endif
+  
+*** ../vim-7.3.619/src/Make_mvc.mak	2012-02-22 16:01:53.000000000 +0100
+--- src/Make_mvc.mak	2012-08-02 17:42:31.000000000 +0200
+***************
+*** 63,68 ****
+--- 63,70 ----
+  #	  RUBY_VER=[Ruby version, eg 16, 17] (default is 18)
+  #	  RUBY_VER_LONG=[Ruby version, eg 1.6, 1.7] (default is 1.8)
+  #	    You must set RUBY_VER_LONG when change RUBY_VER.
++ #	    You must set RUBY_API_VER to RUBY_VER_LONG.
++ #	    Don't set ruby API version to RUBY_VER like 191.
+  #
+  #	Tcl interface:
+  #	  TCL=[Path to Tcl directory]
+***************
+*** 807,834 ****
+  !ifndef RUBY_VER_LONG
+  RUBY_VER_LONG = 1.8
+  !endif
+  
+  !if $(RUBY_VER) >= 18
+  !ifndef RUBY_PLATFORM
+  RUBY_PLATFORM = i386-mswin32
+  !endif
+  !ifndef RUBY_INSTALL_NAME
+! RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_VER)
+  !endif
+  !else
+  !ifndef RUBY_PLATFORM
+  RUBY_PLATFORM = i586-mswin32
+  !endif
+  !ifndef RUBY_INSTALL_NAME
+! RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_VER)
+  !endif
+  !endif # $(RUBY_VER) >= 18
+  
+  !message Ruby requested (version $(RUBY_VER)) - root dir is "$(RUBY)"
+  CFLAGS = $(CFLAGS) -DFEAT_RUBY
+  RUBY_OBJ = $(OUTDIR)\if_ruby.obj
+! !if $(RUBY_VER) >= 190
+! RUBY_INC = /I "$(RUBY)\include\ruby-$(RUBY_VER_LONG)\$(RUBY_PLATFORM)" /I "$(RUBY)\include\ruby-$(RUBY_VER_LONG)"
+  !else
+  RUBY_INC = /I "$(RUBY)\lib\ruby\$(RUBY_VER_LONG)\$(RUBY_PLATFORM)"
+  !endif
+--- 813,843 ----
+  !ifndef RUBY_VER_LONG
+  RUBY_VER_LONG = 1.8
+  !endif
++ !ifndef RUBY_API_VER
++ RUBY_API_VER = $(RUBY_VER_LONG:.=)
++ !endif
+  
+  !if $(RUBY_VER) >= 18
+  !ifndef RUBY_PLATFORM
+  RUBY_PLATFORM = i386-mswin32
+  !endif
+  !ifndef RUBY_INSTALL_NAME
+! RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_API_VER)
+  !endif
+  !else
+  !ifndef RUBY_PLATFORM
+  RUBY_PLATFORM = i586-mswin32
+  !endif
+  !ifndef RUBY_INSTALL_NAME
+! RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER)
+  !endif
+  !endif # $(RUBY_VER) >= 18
+  
+  !message Ruby requested (version $(RUBY_VER)) - root dir is "$(RUBY)"
+  CFLAGS = $(CFLAGS) -DFEAT_RUBY
+  RUBY_OBJ = $(OUTDIR)\if_ruby.obj
+! !if $(RUBY_VER) >= 19
+! RUBY_INC = /I "$(RUBY)\lib\ruby\$(RUBY_VER_LONG)\$(RUBY_PLATFORM)" /I "$(RUBY)\include\ruby-$(RUBY_VER_LONG)" /I "$(RUBY)\include\ruby-$(RUBY_VER_LONG)\$(RUBY_PLATFORM)"
+  !else
+  RUBY_INC = /I "$(RUBY)\lib\ruby\$(RUBY_VER_LONG)\$(RUBY_PLATFORM)"
+  !endif
+*** ../vim-7.3.619/src/version.c	2012-08-02 12:31:40.000000000 +0200
+--- src/version.c	2012-08-02 21:20:28.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     620,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+199. You read this entire list of symptoms, looking for something
+     that doesn't describe you.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.621 b/source/ap/vim/patches/7.3.621
new file mode 100644
index 00000000..7e3fe2a5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.621
@@ -0,0 +1,72 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.621
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.621
+Problem:    Compiler warnings on 64 bit windows.
+Solution:   Add type casts. (Mike Williams)
+Files:	    src/ex_docmd.c, src/search.c
+
+
+*** ../vim-7.3.620/src/ex_docmd.c	2012-07-27 21:12:03.000000000 +0200
+--- src/ex_docmd.c	2012-08-02 21:19:22.000000000 +0200
+***************
+*** 3392,3398 ****
+      /* Find start of last argument (argument just before cursor): */
+      p = buff;
+      xp->xp_pattern = p;
+!     len = STRLEN(buff);
+      while (*p && p < buff + len)
+      {
+  	if (*p == ' ' || *p == TAB)
+--- 3392,3398 ----
+      /* Find start of last argument (argument just before cursor): */
+      p = buff;
+      xp->xp_pattern = p;
+!     len = (int)STRLEN(buff);
+      while (*p && p < buff + len)
+      {
+  	if (*p == ' ' || *p == TAB)
+*** ../vim-7.3.620/src/search.c	2012-07-29 12:55:21.000000000 +0200
+--- src/search.c	2012-08-02 21:20:02.000000000 +0200
+***************
+*** 4621,4627 ****
+  	    {
+  		/* searching backwards, so set pos to last line and col */
+  		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
+! 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
+  	    }
+  	}
+  
+--- 4621,4628 ----
+  	    {
+  		/* searching backwards, so set pos to last line and col */
+  		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
+! 		pos.col  = (colnr_T)STRLEN(
+! 				ml_get(curwin->w_buffer->b_ml.ml_line_count));
+  	    }
+  	}
+  
+*** ../vim-7.3.620/src/version.c	2012-08-02 21:21:43.000000000 +0200
+--- src/version.c	2012-08-02 21:23:13.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     621,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+200. You really believe in the concept of a "paperless" office.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.622 b/source/ap/vim/patches/7.3.622
new file mode 100644
index 00000000..a2c26014
--- /dev/null
+++ b/source/ap/vim/patches/7.3.622
@@ -0,0 +1,56 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.622
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.622
+Problem:    XPM library for Win32 can't be found.
+Solution:   Suggest using the one from the Vim ftp site.
+Files:	    src/Make_mvc.mak
+
+
+*** ../vim-7.3.621/src/Make_mvc.mak	2012-08-02 21:21:43.000000000 +0200
+--- src/Make_mvc.mak	2012-08-02 21:45:52.000000000 +0200
+***************
+*** 281,287 ****
+  
+  !ifdef XPM
+  # XPM - Include support for XPM signs
+! # you can get xpm.lib from http://iamphet.nm.ru/xpm or create it yourself
+  XPM_OBJ   = $(OBJDIR)/xpm_w32.obj
+  XPM_DEFS  = -DFEAT_XPM_W32
+  XPM_LIB   = $(XPM)\lib\libXpm.lib
+--- 281,291 ----
+  
+  !ifdef XPM
+  # XPM - Include support for XPM signs
+! # You need to download or build  xpm.lib somehow.
+! # You can get the most recent version of libXpm-*.zip from
+! #   http://cgit.freedesktop.org/xorg/lib/libXpm
+! # from which you must build xpm.lib yourself
+! #   OR get and unpack: ftp://ftp.vim.org/pub/vim/pcextra/xpm.zip
+  XPM_OBJ   = $(OBJDIR)/xpm_w32.obj
+  XPM_DEFS  = -DFEAT_XPM_W32
+  XPM_LIB   = $(XPM)\lib\libXpm.lib
+*** ../vim-7.3.621/src/version.c	2012-08-02 21:24:38.000000000 +0200
+--- src/version.c	2012-08-02 21:46:43.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     622,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+202. You're amazed to find out Spam is a food.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.623 b/source/ap/vim/patches/7.3.623
new file mode 100644
index 00000000..72aea71f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.623
@@ -0,0 +1,92 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.623
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.623
+Problem:    Perl 5.14 commands crash Vim on MS-Windows.
+Solution:   Use perl_get_sv() instead of GvSV(). (Raymond Ko)
+Files:	    src/if_perl.xs
+
+
+*** ../vim-7.3.622/src/if_perl.xs	2012-03-16 19:34:43.000000000 +0100
+--- src/if_perl.xs	2012-08-08 13:15:29.000000000 +0200
+***************
+*** 76,81 ****
+--- 76,87 ----
+  # define EXTERN_C
+  #endif
+  
++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 14) && defined(_MSC_VER)
++ /* Using PL_errgv to get the error message after perl_eval_sv() causes a crash
++  * with MSVC and Perl version 5.14. */
++ # define AVOID_PL_ERRGV
++ #endif
++ 
+  /* Compatibility hacks over */
+  
+  static PerlInterpreter *perl_interp = NULL;
+***************
+*** 796,802 ****
+--- 802,812 ----
+  
+      SvREFCNT_dec(sv);
+  
++ #ifdef AVOID_PL_ERRGV
++     err = SvPV(perl_get_sv("@", GV_ADD), length);
++ #else
+      err = SvPV(GvSV(PL_errgv), length);
++ #endif
+  
+      FREETMPS;
+      LEAVE;
+***************
+*** 866,872 ****
+--- 876,886 ----
+      sv_catpvn(sv, "}", 1);
+      perl_eval_sv(sv, G_DISCARD | G_NOARGS);
+      SvREFCNT_dec(sv);
++ #ifdef AVOID_PL_ERRGV
++     str = SvPV(perl_get_sv("@", GV_ADD), length);
++ #else
+      str = SvPV(GvSV(PL_errgv), length);
++ #endif
+      if (length)
+  	goto err;
+  
+***************
+*** 880,886 ****
+--- 894,904 ----
+  	sv_setpv(GvSV(PL_defgv), (char *)ml_get(i));
+  	PUSHMARK(sp);
+  	perl_call_pv("VIM::perldo", G_SCALAR | G_EVAL);
++ #ifdef AVOID_PL_ERRGV
++ 	str = SvPV(perl_get_sv("@", GV_ADD), length);
++ #else
+  	str = SvPV(GvSV(PL_errgv), length);
++ #endif
+  	if (length)
+  	    break;
+  	SPAGAIN;
+*** ../vim-7.3.622/src/version.c	2012-08-02 21:48:20.000000000 +0200
+--- src/version.c	2012-08-08 13:08:10.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     623,
+  /**/
+
+-- 
+Don't be humble ... you're not that great.
+                      -- Golda Meir
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.624 b/source/ap/vim/patches/7.3.624
new file mode 100644
index 00000000..f1150b63
--- /dev/null
+++ b/source/ap/vim/patches/7.3.624
@@ -0,0 +1,52 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.624
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.624
+Problem:    When cancelling input() it returns the third argument. That should
+	    only happen for inputdialog().
+Solution:   Check if inputdialog() was used. (Hirohito Higashi)
+Files:	    src/eval.c
+
+
+*** ../vim-7.3.623/src/eval.c	2012-07-25 16:46:59.000000000 +0200
+--- src/eval.c	2012-08-08 14:31:48.000000000 +0200
+***************
+*** 12966,12972 ****
+  	    rettv->vval.v_string =
+  		getcmdline_prompt(inputsecret_flag ? NUL : '@', p, echo_attr,
+  				  xp_type, xp_arg);
+! 	if (rettv->vval.v_string == NULL
+  		&& argvars[1].v_type != VAR_UNKNOWN
+  		&& argvars[2].v_type != VAR_UNKNOWN)
+  	    rettv->vval.v_string = vim_strsave(get_tv_string_buf(
+--- 12966,12972 ----
+  	    rettv->vval.v_string =
+  		getcmdline_prompt(inputsecret_flag ? NUL : '@', p, echo_attr,
+  				  xp_type, xp_arg);
+! 	if (inputdialog && rettv->vval.v_string == NULL
+  		&& argvars[1].v_type != VAR_UNKNOWN
+  		&& argvars[2].v_type != VAR_UNKNOWN)
+  	    rettv->vval.v_string = vim_strsave(get_tv_string_buf(
+*** ../vim-7.3.623/src/version.c	2012-08-08 13:17:26.000000000 +0200
+--- src/version.c	2012-08-08 14:28:46.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     624,
+  /**/
+
+-- 
+Your fault: core dumped
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.625 b/source/ap/vim/patches/7.3.625
new file mode 100644
index 00000000..5334bc8f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.625
@@ -0,0 +1,140 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.625
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.625
+Problem:    "gn" does not handle zero-width matches correctly.
+Solution:   Handle zero-width patterns specially. (Christian Brabandt)
+Files:	    src/search.c
+
+
+*** ../vim-7.3.624/src/search.c	2012-08-02 21:24:38.000000000 +0200
+--- src/search.c	2012-08-08 15:25:12.000000000 +0200
+***************
+*** 4546,4551 ****
+--- 4546,4554 ----
+      int		visual_active = FALSE;
+      int		flags = 0;
+      pos_T	save_VIsual;
++     regmmatch_T	regmatch;
++     int		nmatched = 0;
++     int		zerowidth = FALSE;
+  
+  
+      /* wrapping should not occur */
+***************
+*** 4581,4603 ****
+  	orig_pos = pos = start_pos = curwin->w_cursor;
+  
+      /*
+       * The trick is to first search backwards and then search forward again,
+       * so that a match at the current cursor position will be correctly
+       * captured.
+       */
+      for (i = 0; i < 2; i++)
+      {
+- 	if (i && count == 1)
+- 	    flags = SEARCH_START;
+- 
+  	if (forward)
+  	    dir = i;
+  	else
+  	    dir = !i;
+  	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
+  		spats[last_idx].pat, (long) (i ? count : 1),
+! 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
+! 		RE_SEARCH, 0, NULL);
+  
+  	/* First search may fail, but then start searching from the
+  	 * beginning of the file (cursor might be on the search match)
+--- 4584,4625 ----
+  	orig_pos = pos = start_pos = curwin->w_cursor;
+  
+      /*
++      * Check for zero-width pattern.
++      */
++     if (search_regcomp(spats[last_idx].pat, RE_SEARCH, RE_SEARCH,
++ 			     ((SEARCH_HIS + SEARCH_KEEP)), &regmatch) == FAIL)
++ 	return FAIL;
++ 
++     /* Zero-width pattern should match somewhere, then we can check if start
++      * and end are in the same position. */
++     nmatched = vim_regexec_multi(&regmatch, curwin, curbuf,
++ 				     curwin->w_cursor.lnum, (colnr_T)0, NULL);
++     if (called_emsg)
++ 	return FAIL;
++     if (nmatched && regmatch.startpos[0].lnum == regmatch.endpos[0].lnum
++ 		 && regmatch.endpos[0].col == regmatch.startpos[0].col)
++ 	zerowidth = TRUE;
++     vim_free(regmatch.regprog);
++ 
++     /*
+       * The trick is to first search backwards and then search forward again,
+       * so that a match at the current cursor position will be correctly
+       * captured.
+       */
+      for (i = 0; i < 2; i++)
+      {
+  	if (forward)
+  	    dir = i;
+  	else
+  	    dir = !i;
++ 
++ 	flags = 0;
++ 	if (!dir && !zerowidth)
++ 	    flags = SEARCH_END;
++ 
+  	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
+  		spats[last_idx].pat, (long) (i ? count : 1),
+! 		SEARCH_KEEP | flags, RE_SEARCH, 0, NULL);
+  
+  	/* First search may fail, but then start searching from the
+  	 * beginning of the file (cursor might be on the search match)
+***************
+*** 4629,4638 ****
+      }
+  
+      start_pos = pos;
+!     flags = (forward ? SEARCH_END : 0);
+  
+!     /* move to match */
+!     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
+  	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
+  
+      if (!VIsual_active)
+--- 4651,4662 ----
+      }
+  
+      start_pos = pos;
+!     flags = forward ? SEARCH_END : 0;
+  
+!     /* move to match, except for zero-width matches, in which case, we are
+!      * already on the next match */
+!     if (!zerowidth)
+! 	result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
+  	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
+  
+      if (!VIsual_active)
+*** ../vim-7.3.624/src/version.c	2012-08-08 14:33:16.000000000 +0200
+--- src/version.c	2012-08-08 15:21:53.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     625,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+222. You send more than 20 personal e-mails a day.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.626 b/source/ap/vim/patches/7.3.626
new file mode 100644
index 00000000..33b15456
--- /dev/null
+++ b/source/ap/vim/patches/7.3.626
@@ -0,0 +1,49 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.626
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.626
+Problem:    Python interface doesn't build with Python 2.4 or older.
+Solution:   Define Py_ssize_t. (Benjamin Bannier)
+Files:	    src/if_py_both.h
+
+
+*** ../vim-7.3.625/src/if_py_both.h	2012-07-25 15:36:00.000000000 +0200
+--- src/if_py_both.h	2012-08-08 15:53:24.000000000 +0200
+***************
+*** 12,17 ****
+--- 12,21 ----
+   * Common code for if_python.c and if_python3.c.
+   */
+  
++ #if PY_VERSION_HEX < 0x02050000
++ typedef int Py_ssize_t;  /* Python 2.4 and earlier don't have this type. */
++ #endif
++ 
+  #ifdef FEAT_MBYTE
+  # define ENC_OPT p_enc
+  #else
+*** ../vim-7.3.625/src/version.c	2012-08-08 15:27:54.000000000 +0200
+--- src/version.c	2012-08-08 15:52:07.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     626,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+224. You set up your own Web page. You set up a Web page for each
+     of your kids... and your pets.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.627 b/source/ap/vim/patches/7.3.627
new file mode 100644
index 00000000..97a0298d
--- /dev/null
+++ b/source/ap/vim/patches/7.3.627
@@ -0,0 +1,102 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.627
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.627
+Problem:    When using the "n" flag with the ":s" command a \= substitution
+	    will not be evaluated.
+Solution:   Do perform the evaluation, so that a function can be invoked at
+	    every matching position without changing the text. (Christian
+	    Brabandt)
+Files:	    src/ex_cmds.c
+
+
+*** ../vim-7.3.626/src/ex_cmds.c	2012-07-10 15:18:18.000000000 +0200
+--- src/ex_cmds.c	2012-08-08 16:44:16.000000000 +0200
+***************
+*** 4264,4269 ****
+--- 4264,4272 ----
+      int		endcolumn = FALSE;	/* cursor in last column when done */
+      pos_T	old_cursor = curwin->w_cursor;
+      int		start_nsubs;
++ #ifdef FEAT_EVAL
++     int         save_ma = 0;
++ #endif
+  
+      cmd = eap->arg;
+      if (!global_busy)
+***************
+*** 4668,4674 ****
+  		    }
+  		    sub_nsubs++;
+  		    did_sub = TRUE;
+! 		    goto skip;
+  		}
+  
+  		if (do_ask)
+--- 4671,4682 ----
+  		    }
+  		    sub_nsubs++;
+  		    did_sub = TRUE;
+! #ifdef FEAT_EVAL
+! 		    /* Skip the substitution, unless an expression is used,
+! 		     * then it is evaluated in the sandbox. */
+! 		    if (!(sub[0] == '\\' && sub[1] == '='))
+! #endif
+! 			goto skip;
+  		}
+  
+  		if (do_ask)
+***************
+*** 4840,4849 ****
+--- 4848,4874 ----
+  		/*
+  		 * 3. substitute the string.
+  		 */
++ #ifdef FEAT_EVAL
++ 		if (do_count)
++ 		{
++ 		    /* prevent accidently changing the buffer by a function */
++ 		    save_ma = curbuf->b_p_ma;
++ 		    curbuf->b_p_ma = FALSE;
++ 		    sandbox++;
++ 		}
++ #endif
+  		/* get length of substitution part */
+  		sublen = vim_regsub_multi(&regmatch,
+  				    sub_firstlnum - regmatch.startpos[0].lnum,
+  				    sub, sub_firstline, FALSE, p_magic, TRUE);
++ #ifdef FEAT_EVAL
++ 		if (do_count)
++ 		{
++ 		    curbuf->b_p_ma = save_ma;
++ 		    sandbox--;
++ 		    goto skip;
++ 		}
++ #endif
+  
+  		/* When the match included the "$" of the last line it may
+  		 * go beyond the last line of the buffer. */
+*** ../vim-7.3.626/src/version.c	2012-08-08 16:05:03.000000000 +0200
+--- src/version.c	2012-08-08 16:48:45.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     627,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+225. You sign up for free subscriptions for all the computer magazines
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.628 b/source/ap/vim/patches/7.3.628
new file mode 100644
index 00000000..bab31479
--- /dev/null
+++ b/source/ap/vim/patches/7.3.628
@@ -0,0 +1,54 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.628
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.628
+Problem:    ":open" does not allow for a !, which results in a confusing error
+	    message. (Shawn Wilson)
+Solution:   Allow ! on ":open". (Christian Brabandt)
+Files:	    src/ex_cmds.h
+
+
+*** ../vim-7.3.627/src/ex_cmds.h	2012-07-06 18:27:34.000000000 +0200
+--- src/ex_cmds.h	2012-08-08 17:15:45.000000000 +0200
+***************
+*** 662,668 ****
+  EX(CMD_nunmenu,		"nunmenu",	ex_menu,
+  			EXTRA|TRLBAR|NOTRLCOM|USECTRLV|CMDWIN),
+  EX(CMD_open,		"open",		ex_open,
+! 			RANGE|EXTRA),
+  EX(CMD_oldfiles,	"oldfiles",	ex_oldfiles,
+  			BANG|TRLBAR|SBOXOK|CMDWIN),
+  EX(CMD_omap,		"omap",		ex_map,
+--- 662,668 ----
+  EX(CMD_nunmenu,		"nunmenu",	ex_menu,
+  			EXTRA|TRLBAR|NOTRLCOM|USECTRLV|CMDWIN),
+  EX(CMD_open,		"open",		ex_open,
+! 			RANGE|BANG|EXTRA),
+  EX(CMD_oldfiles,	"oldfiles",	ex_oldfiles,
+  			BANG|TRLBAR|SBOXOK|CMDWIN),
+  EX(CMD_omap,		"omap",		ex_map,
+*** ../vim-7.3.627/src/version.c	2012-08-08 16:50:40.000000000 +0200
+--- src/version.c	2012-08-08 17:30:14.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     628,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+226. You sit down at the computer right after dinner and your spouse
+     says "See you in the morning."
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.629 b/source/ap/vim/patches/7.3.629
new file mode 100644
index 00000000..8e26dd49
--- /dev/null
+++ b/source/ap/vim/patches/7.3.629
@@ -0,0 +1,437 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.629
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.629
+Problem:    There is no way to make 'shiftwidth' follow 'tabstop'.
+Solution:   When 'shiftwidth' is zero use the value of 'tabstop'. (Christian
+	    Brabandt)
+Files:	    src/edit.c, src/ex_getln.c, src/fold.c, src/misc1.c, src/ops.c,
+	    src/option.c, src/proto/option.pro
+
+
+*** ../vim-7.3.628/src/edit.c	2012-07-25 16:46:59.000000000 +0200
+--- src/edit.c	2012-08-08 17:55:37.000000000 +0200
+***************
+*** 8899,8907 ****
+  
+  	    *inserted_space_p = FALSE;
+  	    if (p_sta && in_indent)
+! 		ts = curbuf->b_p_sw;
+  	    else
+! 		ts = curbuf->b_p_sts;
+  	    /* Compute the virtual column where we want to be.  Since
+  	     * 'showbreak' may get in the way, need to get the last column of
+  	     * the previous character. */
+--- 8899,8907 ----
+  
+  	    *inserted_space_p = FALSE;
+  	    if (p_sta && in_indent)
+! 		ts = (int)get_sw_value();
+  	    else
+! 		ts = (int)curbuf->b_p_sts;
+  	    /* Compute the virtual column where we want to be.  Since
+  	     * 'showbreak' may get in the way, need to get the last column of
+  	     * the previous character. */
+***************
+*** 9589,9595 ****
+       * When nothing special, insert TAB like a normal character
+       */
+      if (!curbuf->b_p_et
+! 	    && !(p_sta && ind && curbuf->b_p_ts != curbuf->b_p_sw)
+  	    && curbuf->b_p_sts == 0)
+  	return TRUE;
+  
+--- 9589,9595 ----
+       * When nothing special, insert TAB like a normal character
+       */
+      if (!curbuf->b_p_et
+! 	    && !(p_sta && ind && curbuf->b_p_ts != get_sw_value())
+  	    && curbuf->b_p_sts == 0)
+  	return TRUE;
+  
+***************
+*** 9605,9611 ****
+      AppendToRedobuff((char_u *)"\t");
+  
+      if (p_sta && ind)		/* insert tab in indent, use 'shiftwidth' */
+! 	temp = (int)curbuf->b_p_sw;
+      else if (curbuf->b_p_sts > 0) /* use 'softtabstop' when set */
+  	temp = (int)curbuf->b_p_sts;
+      else			/* otherwise use 'tabstop' */
+--- 9605,9611 ----
+      AppendToRedobuff((char_u *)"\t");
+  
+      if (p_sta && ind)		/* insert tab in indent, use 'shiftwidth' */
+! 	temp = (int)get_sw_value();
+      else if (curbuf->b_p_sts > 0) /* use 'softtabstop' when set */
+  	temp = (int)curbuf->b_p_sts;
+      else			/* otherwise use 'tabstop' */
+*** ../vim-7.3.628/src/ex_getln.c	2012-06-29 13:44:37.000000000 +0200
+--- src/ex_getln.c	2012-08-08 17:39:40.000000000 +0200
+***************
+*** 2268,2277 ****
+  
+  	    if (c1 == Ctrl_T)
+  	    {
+  		p = (char_u *)line_ga.ga_data;
+  		p[line_ga.ga_len] = NUL;
+  		indent = get_indent_str(p, 8);
+! 		indent += curbuf->b_p_sw - indent % curbuf->b_p_sw;
+  add_indent:
+  		while (get_indent_str(p, 8) < indent)
+  		{
+--- 2268,2279 ----
+  
+  	    if (c1 == Ctrl_T)
+  	    {
++ 		long        sw = get_sw_value();
++ 
+  		p = (char_u *)line_ga.ga_data;
+  		p[line_ga.ga_len] = NUL;
+  		indent = get_indent_str(p, 8);
+! 		indent += sw - indent % sw;
+  add_indent:
+  		while (get_indent_str(p, 8) < indent)
+  		{
+***************
+*** 2323,2329 ****
+  		    p[line_ga.ga_len] = NUL;
+  		    indent = get_indent_str(p, 8);
+  		    --indent;
+! 		    indent -= indent % curbuf->b_p_sw;
+  		}
+  		while (get_indent_str(p, 8) > indent)
+  		{
+--- 2325,2331 ----
+  		    p[line_ga.ga_len] = NUL;
+  		    indent = get_indent_str(p, 8);
+  		    --indent;
+! 		    indent -= indent % get_sw_value();
+  		}
+  		while (get_indent_str(p, 8) > indent)
+  		{
+*** ../vim-7.3.628/src/fold.c	2012-02-29 19:19:57.000000000 +0100
+--- src/fold.c	2012-08-08 17:40:11.000000000 +0200
+***************
+*** 3025,3031 ****
+  	    flp->lvl = -1;
+      }
+      else
+! 	flp->lvl = get_indent_buf(buf, lnum) / buf->b_p_sw;
+      if (flp->lvl > flp->wp->w_p_fdn)
+      {
+  	flp->lvl = flp->wp->w_p_fdn;
+--- 3025,3031 ----
+  	    flp->lvl = -1;
+      }
+      else
+! 	flp->lvl = get_indent_buf(buf, lnum) / get_sw_value();
+      if (flp->lvl > flp->wp->w_p_fdn)
+      {
+  	flp->lvl = flp->wp->w_p_fdn;
+*** ../vim-7.3.628/src/misc1.c	2012-07-25 16:09:59.000000000 +0200
+--- src/misc1.c	2012-08-08 17:43:07.000000000 +0200
+***************
+*** 1389,1397 ****
+  #ifdef FEAT_SMARTINDENT
+  	if (did_si)
+  	{
+  	    if (p_sr)
+! 		newindent -= newindent % (int)curbuf->b_p_sw;
+! 	    newindent += (int)curbuf->b_p_sw;
+  	}
+  #endif
+  	/* Copy the indent */
+--- 1389,1399 ----
+  #ifdef FEAT_SMARTINDENT
+  	if (did_si)
+  	{
++ 	    int        sw = (int)get_sw_value();
++ 
+  	    if (p_sr)
+! 		newindent -= newindent % sw;
+! 	    newindent += sw;
+  	}
+  #endif
+  	/* Copy the indent */
+***************
+*** 6461,6471 ****
+      int
+  get_c_indent()
+  {
+      /*
+       * spaces from a block's opening brace the prevailing indent for that
+       * block should be
+       */
+!     int ind_level = curbuf->b_p_sw;
+  
+      /*
+       * spaces from the edge of the line an open brace that's at the end of a
+--- 6463,6476 ----
+      int
+  get_c_indent()
+  {
++     int sw = (int)get_sw_value();
++ 
+      /*
+       * spaces from a block's opening brace the prevailing indent for that
+       * block should be
+       */
+! 
+!     int ind_level = sw;
+  
+      /*
+       * spaces from the edge of the line an open brace that's at the end of a
+***************
+*** 6512,6523 ****
+      /*
+       * spaces from the switch() indent a "case xx" label should be located
+       */
+!     int ind_case = curbuf->b_p_sw;
+  
+      /*
+       * spaces from the "case xx:" code after a switch() should be located
+       */
+!     int ind_case_code = curbuf->b_p_sw;
+  
+      /*
+       * lineup break at end of case in switch() with case label
+--- 6517,6528 ----
+      /*
+       * spaces from the switch() indent a "case xx" label should be located
+       */
+!     int ind_case = sw;
+  
+      /*
+       * spaces from the "case xx:" code after a switch() should be located
+       */
+!     int ind_case_code = sw;
+  
+      /*
+       * lineup break at end of case in switch() with case label
+***************
+*** 6528,6572 ****
+       * spaces from the class declaration indent a scope declaration label
+       * should be located
+       */
+!     int ind_scopedecl = curbuf->b_p_sw;
+  
+      /*
+       * spaces from the scope declaration label code should be located
+       */
+!     int ind_scopedecl_code = curbuf->b_p_sw;
+  
+      /*
+       * amount K&R-style parameters should be indented
+       */
+!     int ind_param = curbuf->b_p_sw;
+  
+      /*
+       * amount a function type spec should be indented
+       */
+!     int ind_func_type = curbuf->b_p_sw;
+  
+      /*
+       * amount a cpp base class declaration or constructor initialization
+       * should be indented
+       */
+!     int ind_cpp_baseclass = curbuf->b_p_sw;
+  
+      /*
+       * additional spaces beyond the prevailing indent a continuation line
+       * should be located
+       */
+!     int ind_continuation = curbuf->b_p_sw;
+  
+      /*
+       * spaces from the indent of the line with an unclosed parentheses
+       */
+!     int ind_unclosed = curbuf->b_p_sw * 2;
+  
+      /*
+       * spaces from the indent of the line with an unclosed parentheses, which
+       * itself is also unclosed
+       */
+!     int ind_unclosed2 = curbuf->b_p_sw;
+  
+      /*
+       * suppress ignoring spaces from the indent of a line starting with an
+--- 6533,6577 ----
+       * spaces from the class declaration indent a scope declaration label
+       * should be located
+       */
+!     int ind_scopedecl = sw;
+  
+      /*
+       * spaces from the scope declaration label code should be located
+       */
+!     int ind_scopedecl_code = sw;
+  
+      /*
+       * amount K&R-style parameters should be indented
+       */
+!     int ind_param = sw;
+  
+      /*
+       * amount a function type spec should be indented
+       */
+!     int ind_func_type = sw;
+  
+      /*
+       * amount a cpp base class declaration or constructor initialization
+       * should be indented
+       */
+!     int ind_cpp_baseclass = sw;
+  
+      /*
+       * additional spaces beyond the prevailing indent a continuation line
+       * should be located
+       */
+!     int ind_continuation = sw;
+  
+      /*
+       * spaces from the indent of the line with an unclosed parentheses
+       */
+!     int ind_unclosed = sw * 2;
+  
+      /*
+       * spaces from the indent of the line with an unclosed parentheses, which
+       * itself is also unclosed
+       */
+!     int ind_unclosed2 = sw;
+  
+      /*
+       * suppress ignoring spaces from the indent of a line starting with an
+***************
+*** 6719,6730 ****
+  	if (*options == 's')	    /* "2s" means two times 'shiftwidth' */
+  	{
+  	    if (options == digits)
+! 		n = curbuf->b_p_sw;	/* just "s" is one 'shiftwidth' */
+  	    else
+  	    {
+! 		n *= curbuf->b_p_sw;
+  		if (divider)
+! 		    n += (curbuf->b_p_sw * fraction + divider / 2) / divider;
+  	    }
+  	    ++options;
+  	}
+--- 6724,6735 ----
+  	if (*options == 's')	    /* "2s" means two times 'shiftwidth' */
+  	{
+  	    if (options == digits)
+! 		n = sw;	/* just "s" is one 'shiftwidth' */
+  	    else
+  	    {
+! 		n *= sw;
+  		if (divider)
+! 		    n += (sw * fraction + divider / 2) / divider;
+  	    }
+  	    ++options;
+  	}
+*** ../vim-7.3.628/src/ops.c	2012-07-10 16:49:08.000000000 +0200
+--- src/ops.c	2012-08-08 17:34:28.000000000 +0200
+***************
+*** 332,338 ****
+  {
+      int		count;
+      int		i, j;
+!     int		p_sw = (int)curbuf->b_p_sw;
+  
+      count = get_indent();	/* get current indent */
+  
+--- 332,338 ----
+  {
+      int		count;
+      int		i, j;
+!     int		p_sw = (int)get_sw_value();
+  
+      count = get_indent();	/* get current indent */
+  
+***************
+*** 388,394 ****
+      int			total;
+      char_u		*newp, *oldp;
+      int			oldcol = curwin->w_cursor.col;
+!     int			p_sw = (int)curbuf->b_p_sw;
+      int			p_ts = (int)curbuf->b_p_ts;
+      struct block_def	bd;
+      int			incr;
+--- 388,394 ----
+      int			total;
+      char_u		*newp, *oldp;
+      int			oldcol = curwin->w_cursor.col;
+!     int			p_sw = (int)get_sw_value();
+      int			p_ts = (int)curbuf->b_p_ts;
+      struct block_def	bd;
+      int			incr;
+*** ../vim-7.3.628/src/option.c	2012-07-10 18:31:49.000000000 +0200
+--- src/option.c	2012-08-08 17:45:01.000000000 +0200
+***************
+*** 8125,8131 ****
+      need_mouse_correct = TRUE;
+  #endif
+  
+!     if (curbuf->b_p_sw <= 0)
+      {
+  	errmsg = e_positive;
+  	curbuf->b_p_sw = curbuf->b_p_ts;
+--- 8125,8131 ----
+      need_mouse_correct = TRUE;
+  #endif
+  
+!     if (curbuf->b_p_sw < 0)
+      {
+  	errmsg = e_positive;
+  	curbuf->b_p_sw = curbuf->b_p_ts;
+***************
+*** 11419,11421 ****
+--- 11419,11431 ----
+  {
+      return check_opt_strings(p, p_ff_values, FALSE);
+  }
++ 
++ /*
++  * Return the effective shiftwidth value for current buffer, using the
++  * 'tabstop' value when 'shiftwidth' is zero.
++  */
++     long
++ get_sw_value()
++ {
++     return curbuf->b_p_sw ? curbuf->b_p_sw : curbuf->b_p_ts;
++ }
+*** ../vim-7.3.628/src/proto/option.pro	2011-01-22 00:11:42.000000000 +0100
+--- src/proto/option.pro	2012-08-08 17:34:33.000000000 +0200
+***************
+*** 56,59 ****
+--- 56,60 ----
+  void save_file_ff __ARGS((buf_T *buf));
+  int file_ff_differs __ARGS((buf_T *buf, int ignore_empty));
+  int check_ff_value __ARGS((char_u *p));
++ long get_sw_value __ARGS((void));
+  /* vim: set ft=c : */
+*** ../vim-7.3.628/src/version.c	2012-08-08 17:31:36.000000000 +0200
+--- src/version.c	2012-08-08 17:57:48.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     629,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+228. You spend Saturday night making the counter on your home page
+     pass that 2000 mark.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.630 b/source/ap/vim/patches/7.3.630
new file mode 100644
index 00000000..d89cfbfe
--- /dev/null
+++ b/source/ap/vim/patches/7.3.630
@@ -0,0 +1,48 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.630
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.630
+Problem:    "|" does not behave correctly when 'virtualedit' is set.
+Solution:   Call validate_virtcol(). (David Bürgin)
+Files:	    src/normal.c
+
+
+*** ../vim-7.3.629/src/normal.c	2012-07-29 12:55:21.000000000 +0200
+--- src/normal.c	2012-08-15 13:20:13.000000000 +0200
+***************
+*** 7786,7792 ****
+--- 7786,7795 ----
+       * virtualedit.  Recalculate curwin->w_cursor to avoid bad hilighting.
+       */
+      if (c == Ctrl_V && (ve_flags & VE_BLOCK) && gchar_cursor() == TAB)
++     {
++ 	validate_virtcol();
+  	coladvance(curwin->w_virtcol);
++     }
+  #endif
+      VIsual = curwin->w_cursor;
+  
+*** ../vim-7.3.629/src/version.c	2012-08-08 18:01:00.000000000 +0200
+--- src/version.c	2012-08-15 13:30:30.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     630,
+  /**/
+
+-- 
+"Marriage is when a man and woman become as one; the trouble starts
+when they try to decide which one"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.631 b/source/ap/vim/patches/7.3.631
new file mode 100644
index 00000000..b7bff4fc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.631
@@ -0,0 +1,322 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.631
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.631
+Problem:    Cannot complete user names.
+Solution:   Add user name completion.  (Dominique Pelle)
+Files:	    runtime/doc/map.txt, src/auto/configure, src/config.h.in,
+	    src/configure.in, src/ex_docmd.c, src/ex_getln.c,
+	    src/misc1.c, src/misc2.c, src/proto/misc1.pro, src/vim.h
+
+
+*** ../vim-7.3.630/runtime/doc/map.txt	2012-04-30 18:48:38.000000000 +0200
+--- runtime/doc/map.txt	2012-08-15 13:46:34.000000000 +0200
+***************
+*** 1227,1232 ****
+--- 1244,1250 ----
+  	-complete=syntax	syntax file names |'syntax'|
+  	-complete=tag		tags
+  	-complete=tag_listfiles	tags, file names are shown when CTRL-D is hit
++ 	-complete=user		user names
+  	-complete=var		user variables
+  	-complete=custom,{func} custom completion, defined via {func}
+  	-complete=customlist,{func} custom completion, defined via {func}
+*** ../vim-7.3.630/src/auto/configure	2012-07-25 16:32:03.000000000 +0200
+--- src/auto/configure	2012-08-15 13:48:06.000000000 +0200
+***************
+*** 10631,10637 ****
+  fi
+  
+  for ac_func in bcmp fchdir fchown fsync getcwd getpseudotty \
+! 	getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \
+  	memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \
+  	setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \
+  	sigvec strcasecmp strerror strftime stricmp strncasecmp \
+--- 10631,10637 ----
+  fi
+  
+  for ac_func in bcmp fchdir fchown fsync getcwd getpseudotty \
+! 	getpwent getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \
+  	memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \
+  	setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \
+  	sigvec strcasecmp strerror strftime stricmp strncasecmp \
+*** ../vim-7.3.630/src/config.h.in	2012-02-05 22:51:27.000000000 +0100
+--- src/config.h.in	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 161,166 ****
+--- 161,167 ----
+  #undef HAVE_FSYNC
+  #undef HAVE_GETCWD
+  #undef HAVE_GETPSEUDOTTY
++ #undef HAVE_GETPWENT
+  #undef HAVE_GETPWNAM
+  #undef HAVE_GETPWUID
+  #undef HAVE_GETRLIMIT
+*** ../vim-7.3.630/src/configure.in	2012-07-25 16:32:03.000000000 +0200
+--- src/configure.in	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 2994,3000 ****
+  dnl Check for functions in one big call, to reduce the size of configure.
+  dnl Can only be used for functions that do not require any include.
+  AC_CHECK_FUNCS(bcmp fchdir fchown fsync getcwd getpseudotty \
+! 	getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \
+  	memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \
+  	setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \
+  	sigvec strcasecmp strerror strftime stricmp strncasecmp \
+--- 2994,3000 ----
+  dnl Check for functions in one big call, to reduce the size of configure.
+  dnl Can only be used for functions that do not require any include.
+  AC_CHECK_FUNCS(bcmp fchdir fchown fsync getcwd getpseudotty \
+! 	getpwent getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \
+  	memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \
+  	setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \
+  	sigvec strcasecmp strerror strftime stricmp strncasecmp \
+*** ../vim-7.3.630/src/ex_docmd.c	2012-08-02 21:24:38.000000000 +0200
+--- src/ex_docmd.c	2012-08-15 13:54:29.000000000 +0200
+***************
+*** 3515,3520 ****
+--- 3515,3537 ----
+  #endif
+  	    }
+  	}
++ #if defined(FEAT_CMDL_COMPL)
++ 	/* Check for user names */
++ 	if (*xp->xp_pattern == '~')
++ 	{
++ 	    for (p = xp->xp_pattern + 1; *p != NUL && *p != '/'; ++p)
++ 		;
++ 	    /* Complete ~user only if it partially matches a user name.
++ 	     * A full match ~user<Tab> will be replaced by user's home
++ 	     * directory i.e. something like ~user<Tab> -> /home/user/ */
++ 	    if (*p == NUL && p > xp->xp_pattern + 1
++ 				       && match_user(xp->xp_pattern + 1) == 1)
++ 	    {
++ 		xp->xp_context = EXPAND_USER;
++ 		++xp->xp_pattern;
++ 	    }
++ 	}
++ #endif
+      }
+  
+  /*
+***************
+*** 5396,5401 ****
+--- 5413,5419 ----
+  #endif
+      {EXPAND_TAGS, "tag"},
+      {EXPAND_TAGS_LISTFILES, "tag_listfiles"},
++     {EXPAND_USER, "user"},
+      {EXPAND_USER_VARS, "var"},
+      {0, NULL}
+  };
+*** ../vim-7.3.630/src/ex_getln.c	2012-08-08 18:01:00.000000000 +0200
+--- src/ex_getln.c	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 4336,4341 ****
+--- 4336,4342 ----
+   *  EXPAND_EXPRESSION	    Complete internal or user defined function/variable
+   *			    names in expressions, eg :while s^I
+   *  EXPAND_ENV_VARS	    Complete environment variable names
++  *  EXPAND_USER		    Complete user names
+   */
+      static void
+  set_expand_context(xp)
+***************
+*** 4681,4686 ****
+--- 4682,4688 ----
+  	    {EXPAND_LOCALES, get_locales, TRUE, FALSE},
+  #endif
+  	    {EXPAND_ENV_VARS, get_env_name, TRUE, TRUE},
++ 	    {EXPAND_USER, get_users, TRUE, FALSE},
+  	};
+  	int	i;
+  
+*** ../vim-7.3.630/src/misc1.c	2012-08-08 18:01:00.000000000 +0200
+--- src/misc1.c	2012-08-15 13:57:53.000000000 +0200
+***************
+*** 18,23 ****
+--- 18,28 ----
+  static char_u *remove_tail __ARGS((char_u *p, char_u *pend, char_u *name));
+  static int copy_indent __ARGS((int size, char_u	*src));
+  
++ /* All user names (for ~user completion as done by shell). */
++ #if defined(FEAT_CMDL_COMPL) || defined(PROTO)
++ static garray_T	ga_users;
++ #endif
++ 
+  /*
+   * Count the size (in window cells) of the indent in the current line.
+   */
+***************
+*** 3782,3787 ****
+--- 3787,3800 ----
+  {
+      vim_free(homedir);
+  }
++ 
++ # ifdef FEAT_CMDL_COMPL
++     void
++ free_users()
++ {
++     ga_clear_strings(&ga_users);
++ }
++ # endif
+  #endif
+  
+  /*
+***************
+*** 4451,4456 ****
+--- 4464,4543 ----
+      return name;
+  # endif
+  }
++ 
++ /*
++  * Find all user names for user completion.
++  * Done only once and then cached.
++  */
++     static void
++ init_users() {
++     static int	lazy_init_done = FALSE;
++ 
++     if (lazy_init_done)
++ 	return;
++ 
++     lazy_init_done = TRUE;
++     ga_init2(&ga_users, sizeof(char_u *), 20);
++ 
++ # if defined(HAVE_GETPWENT) && defined(HAVE_PWD_H)
++     {
++ 	char_u*		user;
++ 	struct passwd*	pw;
++ 
++ 	setpwent();
++ 	while ((pw = getpwent()) != NULL)
++ 	    /* pw->pw_name shouldn't be NULL but just in case... */
++ 	    if (pw->pw_name != NULL)
++ 	    {
++ 		if (ga_grow(&ga_users, 1) == FAIL)
++ 		    break;
++ 		user = vim_strsave((char_u*)pw->pw_name);
++ 		if (user == NULL)
++ 		    break;
++ 		((char_u **)(ga_users.ga_data))[ga_users.ga_len++] = user;
++ 	    }
++ 	endpwent();
++     }
++ # endif
++ }
++ 
++ /*
++  * Function given to ExpandGeneric() to obtain an user names.
++  */
++     char_u*
++ get_users(xp, idx)
++     expand_T	*xp UNUSED;
++     int		idx;
++ {
++     init_users();
++     if (idx < ga_users.ga_len)
++ 	return ((char_u **)ga_users.ga_data)[idx];
++     return NULL;
++ }
++ 
++ /*
++  * Check whether name matches a user name. Return:
++  * 0 if name does not match any user name.
++  * 1 if name partially matches the beginning of a user name.
++  * 2 is name fully matches a user name.
++  */
++ int match_user(name)
++     char_u* name;
++ {
++     int i;
++     int n = (int)STRLEN(name);
++     int result = 0;
++ 
++     init_users();
++     for (i = 0; i < ga_users.ga_len; i++)
++     {
++ 	if (STRCMP(((char_u **)ga_users.ga_data)[i], name) == 0)
++ 	    return 2; /* full match */
++ 	if (STRNCMP(((char_u **)ga_users.ga_data)[i], name, n) == 0)
++ 	    result = 1; /* partial match */
++     }
++     return result;
++ }
+  #endif
+  
+  /*
+*** ../vim-7.3.630/src/misc2.c	2012-06-29 15:51:26.000000000 +0200
+--- src/misc2.c	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 1110,1115 ****
+--- 1110,1118 ----
+      free_all_marks();
+      alist_clear(&global_alist);
+      free_homedir();
++ # if defined(FEAT_CMDL_COMPL)
++     free_users();
++ # endif
+      free_search_patterns();
+      free_old_sub();
+      free_last_insert();
+*** ../vim-7.3.630/src/proto/misc1.pro	2012-06-06 16:12:54.000000000 +0200
+--- src/proto/misc1.pro	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 50,55 ****
+--- 50,56 ----
+  void vim_beep __ARGS((void));
+  void init_homedir __ARGS((void));
+  void free_homedir __ARGS((void));
++ void free_users __ARGS((void));
+  char_u *expand_env_save __ARGS((char_u *src));
+  char_u *expand_env_save_opt __ARGS((char_u *src, int one));
+  void expand_env __ARGS((char_u *src, char_u *dst, int dstlen));
+***************
+*** 57,62 ****
+--- 58,65 ----
+  char_u *vim_getenv __ARGS((char_u *name, int *mustfree));
+  void vim_setenv __ARGS((char_u *name, char_u *val));
+  char_u *get_env_name __ARGS((expand_T *xp, int idx));
++ char_u *get_users __ARGS((expand_T *xp, int idx));
++ int match_user __ARGS((char_u* name));
+  void home_replace __ARGS((buf_T *buf, char_u *src, char_u *dst, int dstlen, int one));
+  char_u *home_replace_save __ARGS((buf_T *buf, char_u *src));
+  int fullpathcmp __ARGS((char_u *s1, char_u *s2, int checkname));
+*** ../vim-7.3.630/src/vim.h	2012-07-10 17:14:50.000000000 +0200
+--- src/vim.h	2012-08-15 13:46:35.000000000 +0200
+***************
+*** 782,787 ****
+--- 782,788 ----
+  #define EXPAND_OWNSYNTAX	39
+  #define EXPAND_LOCALES		40
+  #define EXPAND_HISTORY		41
++ #define EXPAND_USER		42
+  
+  /* Values for exmode_active (0 is no exmode) */
+  #define EXMODE_NORMAL		1
+*** ../vim-7.3.630/src/version.c	2012-08-15 13:30:55.000000000 +0200
+--- src/version.c	2012-08-15 14:01:12.000000000 +0200
+***************
+*** 716,717 ****
+--- 716,719 ----
+  {   /* Add new patch number below this line */
++ /**/
++     631,
+  /**/
+
+-- 
+"Marriage is the process of finding out what kind of man your wife
+would have preferred"
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.632 b/source/ap/vim/patches/7.3.632
new file mode 100644
index 00000000..9e38969e
--- /dev/null
+++ b/source/ap/vim/patches/7.3.632
@@ -0,0 +1,537 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.632
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.632
+Problem:    Cannot select beyond 222 columns with the mouse in xterm.
+Solution:   Add support for SGR mouse tracking. (Hayaki Saito)
+Files:      runtime/doc/options.txt, src/feature.h, src/keymap.h, src/misc2.c,
+            src/option.h, src/os_unix.c, src/term.c, src/version.c
+
+
+*** ../vim-7.3.631/runtime/doc/options.txt	2012-07-10 16:49:08.000000000 +0200
+--- runtime/doc/options.txt	2012-08-15 16:04:26.000000000 +0200
+***************
+*** 7383,7388 ****
+--- 7424,7435 ----
+  	   jsbterm	JSB term mouse handling.
+  							*pterm-mouse*
+  	   pterm	QNX pterm mouse handling.
++ 							*urxvt-mouse*
++ 	   urxvt	Mouse handling for the urxvt (rxvt-unicode) terminal.
++ 							*sgr-mouse*
++ 	   sgr		Mouse handling for the terminal that emits SGR-styled
++ 			mouse reporting. Works with xterm version 277 or
++ 			later.
+  
+  	The mouse handling must be enabled at compile time |+mouse_xterm|
+  	|+mouse_dec| |+mouse_netterm|.
+***************
+*** 7395,7400 ****
+--- 7442,7448 ----
+  	or "xterm2" already.  The main use of this option is to set it to
+  	"xterm", when the terminal name doesn't start with "xterm", but it can
+  	handle xterm mouse codes.
++ 	The "sgr" value will be set if the xterm version is 277 or later.
+  	The "xterm2" value will be set if the xterm version is reported to be
+  	95 or higher.  This only works when compiled with the |+termresponse|
+  	feature and if |t_RV| is set to the escape sequence to request the
+*** ../vim-7.3.631/src/feature.h	2012-04-25 16:50:44.000000000 +0200
+--- src/feature.h	2012-08-15 15:46:07.000000000 +0200
+***************
+*** 1056,1061 ****
+--- 1056,1064 ----
+  # ifdef FEAT_BIG
+  #  define FEAT_MOUSE_URXVT
+  # endif
++ # ifdef FEAT_BIG
++ #  define FEAT_MOUSE_SGR
++ # endif
+  # if defined(FEAT_NORMAL) && (defined(MSDOS) || defined(WIN3264))
+  #  define DOS_MOUSE
+  # endif
+***************
+*** 1077,1082 ****
+--- 1080,1090 ----
+  # define FEAT_MOUSE_XTERM
+  #endif
+  
++ /* sgr is a small variation of mouse_xterm, and shares its code */
++ #if defined(FEAT_MOUSE_SGR) && !defined(FEAT_MOUSE_XTERM)
++ # define FEAT_MOUSE_XTERM
++ #endif
++ 
+  /* Define FEAT_MOUSE when any of the above is defined or FEAT_GUI. */
+  #if !defined(FEAT_MOUSE_TTY) \
+  	&& (defined(FEAT_MOUSE_XTERM) \
+***************
+*** 1087,1093 ****
+  	    || defined(FEAT_MOUSE_JSB) \
+  	    || defined(FEAT_MOUSE_PTERM) \
+  	    || defined(FEAT_SYSMOUSE) \
+! 	    || defined(FEAT_MOUSE_URXVT))
+  # define FEAT_MOUSE_TTY		/* include non-GUI mouse support */
+  #endif
+  #if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI))
+--- 1095,1102 ----
+  	    || defined(FEAT_MOUSE_JSB) \
+  	    || defined(FEAT_MOUSE_PTERM) \
+  	    || defined(FEAT_SYSMOUSE) \
+! 	    || defined(FEAT_MOUSE_URXVT) \
+! 	    || defined(FEAT_MOUSE_SGR))
+  # define FEAT_MOUSE_TTY		/* include non-GUI mouse support */
+  #endif
+  #if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI))
+*** ../vim-7.3.631/src/keymap.h	2012-01-20 17:15:47.000000000 +0100
+--- src/keymap.h	2012-08-15 15:46:07.000000000 +0200
+***************
+*** 110,115 ****
+--- 110,118 ----
+  /* Used for the urxvt mouse. */
+  #define KS_URXVT_MOUSE		238
+  
++ /* Used for the sgr mouse. */
++ #define KS_SGR_MOUSE		237
++ 
+  /*
+   * Filler used after KS_SPECIAL and others
+   */
+***************
+*** 412,417 ****
+--- 415,421 ----
+  #define K_JSBTERM_MOUSE	TERMCAP2KEY(KS_JSBTERM_MOUSE, KE_FILLER)
+  #define K_PTERM_MOUSE	TERMCAP2KEY(KS_PTERM_MOUSE, KE_FILLER)
+  #define K_URXVT_MOUSE	TERMCAP2KEY(KS_URXVT_MOUSE, KE_FILLER)
++ #define K_SGR_MOUSE	TERMCAP2KEY(KS_SGR_MOUSE, KE_FILLER)
+  
+  #define K_SELECT	TERMCAP2KEY(KS_SELECT, KE_FILLER)
+  #define K_TEAROFF	TERMCAP2KEY(KS_TEAROFF, KE_FILLER)
+*** ../vim-7.3.631/src/misc2.c	2012-08-15 14:04:50.000000000 +0200
+--- src/misc2.c	2012-08-15 15:46:07.000000000 +0200
+***************
+*** 2433,2438 ****
+--- 2433,2441 ----
+  #ifdef FEAT_MOUSE_URXVT
+      {K_URXVT_MOUSE,	(char_u *)"UrxvtMouse"},
+  #endif
++ #ifdef FEAT_MOUSE_SGR
++     {K_SGR_MOUSE,	(char_u *)"SgrMouse"},
++ #endif
+      {K_LEFTMOUSE,	(char_u *)"LeftMouse"},
+      {K_LEFTMOUSE_NM,	(char_u *)"LeftMouseNM"},
+      {K_LEFTDRAG,	(char_u *)"LeftDrag"},
+*** ../vim-7.3.631/src/option.h	2012-07-10 16:49:08.000000000 +0200
+--- src/option.h	2012-08-15 15:46:07.000000000 +0200
+***************
+*** 822,828 ****
+  EXTERN char_u	*p_ttym;	/* 'ttymouse' */
+  EXTERN unsigned ttym_flags;
+  # ifdef IN_OPTION_C
+! static char *(p_ttym_values[]) = {"xterm", "xterm2", "dec", "netterm", "jsbterm", "pterm", "urxvt", NULL};
+  # endif
+  # define TTYM_XTERM		0x01
+  # define TTYM_XTERM2		0x02
+--- 822,828 ----
+  EXTERN char_u	*p_ttym;	/* 'ttymouse' */
+  EXTERN unsigned ttym_flags;
+  # ifdef IN_OPTION_C
+! static char *(p_ttym_values[]) = {"xterm", "xterm2", "dec", "netterm", "jsbterm", "pterm", "urxvt", "sgr", NULL};
+  # endif
+  # define TTYM_XTERM		0x01
+  # define TTYM_XTERM2		0x02
+***************
+*** 831,836 ****
+--- 831,837 ----
+  # define TTYM_JSBTERM		0x10
+  # define TTYM_PTERM		0x20
+  # define TTYM_URXVT		0x40
++ # define TTYM_SGR		0x80
+  #endif
+  EXTERN char_u	*p_udir;	/* 'undodir' */
+  EXTERN long	p_ul;		/* 'undolevels' */
+*** ../vim-7.3.631/src/os_unix.c	2012-04-20 15:55:10.000000000 +0200
+--- src/os_unix.c	2012-08-15 16:06:54.000000000 +0200
+***************
+*** 2159,2168 ****
+--- 2159,2171 ----
+   * Return 1 for "xterm".
+   * Return 2 for "xterm2".
+   * Return 3 for "urxvt".
++  * Return 4 for "sgr".
+   */
+      int
+  use_xterm_mouse()
+  {
++     if (ttym_flags == TTYM_SGR)
++ 	return 4;
+      if (ttym_flags == TTYM_URXVT)
+  	return 3;
+      if (ttym_flags == TTYM_XTERM2)
+***************
+*** 3339,3345 ****
+      xterm_mouse_vers = use_xterm_mouse();
+  
+  # ifdef FEAT_MOUSE_URXVT
+!     if (ttym_flags == TTYM_URXVT) {
+  	out_str_nf((char_u *)
+  		   (on
+  		   ? IF_EB("\033[?1015h", ESC_STR "[?1015h")
+--- 3342,3349 ----
+      xterm_mouse_vers = use_xterm_mouse();
+  
+  # ifdef FEAT_MOUSE_URXVT
+!     if (ttym_flags == TTYM_URXVT)
+!     {
+  	out_str_nf((char_u *)
+  		   (on
+  		   ? IF_EB("\033[?1015h", ESC_STR "[?1015h")
+***************
+*** 3348,3353 ****
+--- 3352,3368 ----
+      }
+  # endif
+  
++ # ifdef FEAT_MOUSE_SGR
++     if (ttym_flags == TTYM_SGR)
++     {
++ 	out_str_nf((char_u *)
++ 		   (on
++ 		   ? IF_EB("\033[?1006h", ESC_STR "[?1006h")
++ 		   : IF_EB("\033[?1006l", ESC_STR "[?1006l")));
++ 	ison = on;
++     }
++ # endif
++ 
+      if (xterm_mouse_vers > 0)
+      {
+  	if (on)	/* enable mouse events, use mouse tracking if available */
+***************
+*** 3577,3582 ****
+--- 3592,3618 ----
+      else
+  	del_mouse_termcode(KS_URXVT_MOUSE);
+  # endif
++ # ifdef FEAT_MOUSE_SGR
++     /* same as the dec mouse */
++     if (use_xterm_mouse() == 4
++ #  ifdef FEAT_GUI
++ 	    && !gui.in_use
++ #  endif
++ 	    )
++     {
++ 	set_mouse_termcode(KS_SGR_MOUSE, (char_u *)(term_is_8bit(T_NAME)
++ 		    ? IF_EB("\233<", CSI_STR "<")
++ 		    : IF_EB("\033[<", ESC_STR "[<")));
++ 
++ 	if (*p_mouse != NUL)
++ 	{
++ 	    mch_setmouse(FALSE);
++ 	    setmouse();
++ 	}
++     }
++     else
++ 	del_mouse_termcode(KS_SGR_MOUSE);
++ # endif
+  }
+  #endif
+  
+*** ../vim-7.3.631/src/term.c	2012-02-05 22:05:44.000000000 +0100
+--- src/term.c	2012-08-15 16:14:09.000000000 +0200
+***************
+*** 1997,2002 ****
+--- 1997,2003 ----
+  #  define HMT_JSBTERM	8
+  #  define HMT_PTERM	16
+  #  define HMT_URXVT	32
++ #  define HMT_SGR	64
+  static int has_mouse_termcode = 0;
+  # endif
+  
+***************
+*** 2037,2042 ****
+--- 2038,2048 ----
+  	has_mouse_termcode |= HMT_URXVT;
+      else
+  #   endif
++ #   ifdef FEAT_MOUSE_SGR
++     if (n == KS_SGR_MOUSE)
++ 	has_mouse_termcode |= HMT_SGR;
++     else
++ #   endif
+  	has_mouse_termcode |= HMT_NORMAL;
+  #  endif
+  }
+***************
+*** 2079,2084 ****
+--- 2085,2095 ----
+  	has_mouse_termcode &= ~HMT_URXVT;
+      else
+  #   endif
++ #   ifdef FEAT_MOUSE_SGR
++     if (n == KS_SGR_MOUSE)
++ 	has_mouse_termcode &= ~HMT_SGR;
++     else
++ #   endif
+  	has_mouse_termcode &= ~HMT_NORMAL;
+  #  endif
+  }
+***************
+*** 4023,4029 ****
+  #ifdef FEAT_TERMRESPONSE
+  	if (key_name[0] == NUL
+  	    /* URXVT mouse uses <ESC>[#;#;#M, but we are matching <ESC>[ */
+! 	    || key_name[0] == KS_URXVT_MOUSE)
+  	{
+  	    /* Check for xterm version string: "<Esc>[>{x};{vers};{y}c".  Also
+  	     * eat other possible responses to t_RV, rxvt returns
+--- 4034,4041 ----
+  #ifdef FEAT_TERMRESPONSE
+  	if (key_name[0] == NUL
+  	    /* URXVT mouse uses <ESC>[#;#;#M, but we are matching <ESC>[ */
+! 	    || key_name[0] == KS_URXVT_MOUSE
+! 	    || key_name[0] == KS_SGR_MOUSE)
+  	{
+  	    /* Check for xterm version string: "<Esc>[>{x};{vers};{y}c".  Also
+  	     * eat other possible responses to t_RV, rxvt returns
+***************
+*** 4061,4066 ****
+--- 4073,4088 ----
+  
+  		    if (tp[1 + (tp[0] != CSI)] == '>' && j == 2)
+  		    {
++ # ifdef TTYM_SGR
++ 			if (extra >= 277
++ # ifdef TTYM_URXVT
++ 				&& ttym_flags != TTYM_URXVT
++ # endif
++ 				)
++ 			    set_option_value((char_u *)"ttym", 0L,
++ 							  (char_u *)"sgr", 0);
++                         else
++ # endif
+  			/* if xterm version >= 95 use mouse dragging */
+  			if (extra >= 95
+  # ifdef TTYM_URXVT
+***************
+*** 4147,4167 ****
+  	/*
+  	 * If it is a mouse click, get the coordinates.
+  	 */
+! 	if (key_name[0] == (int)KS_MOUSE
+  # ifdef FEAT_MOUSE_JSB
+! 		|| key_name[0] == (int)KS_JSBTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_NET
+! 		|| key_name[0] == (int)KS_NETTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_DEC
+! 		|| key_name[0] == (int)KS_DEC_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_PTERM
+! 		|| key_name[0] == (int)KS_PTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_URXVT
+! 		|| key_name[0] == (int)KS_URXVT_MOUSE
+  # endif
+  		)
+  	{
+--- 4169,4192 ----
+  	/*
+  	 * If it is a mouse click, get the coordinates.
+  	 */
+! 	if (key_name[0] == KS_MOUSE
+  # ifdef FEAT_MOUSE_JSB
+! 		|| key_name[0] == KS_JSBTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_NET
+! 		|| key_name[0] == KS_NETTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_DEC
+! 		|| key_name[0] == KS_DEC_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_PTERM
+! 		|| key_name[0] == KS_PTERM_MOUSE
+  # endif
+  # ifdef FEAT_MOUSE_URXVT
+! 		|| key_name[0] == KS_URXVT_MOUSE
+! # endif
+! # ifdef FEAT_MOUSE_SGR
+! 		|| key_name[0] == KS_SGR_MOUSE
+  # endif
+  		)
+  	{
+***************
+*** 4243,4250 ****
+  		}
+  	    }
+  
+! # ifdef FEAT_MOUSE_URXVT
+! 	    if (key_name[0] == (int)KS_URXVT_MOUSE)
+  	    {
+  		for (;;)
+  		{
+--- 4268,4276 ----
+  		}
+  	    }
+  
+! # if defined(FEAT_MOUSE_URXVT) || defined(FEAT_MOUSE_SGR)
+! 	    if (key_name[0] == KS_URXVT_MOUSE
+! 		|| key_name[0] == KS_SGR_MOUSE)
+  	    {
+  		for (;;)
+  		{
+***************
+*** 4256,4261 ****
+--- 4282,4301 ----
+  		     *		  ^-- row
+  		     *	       ^----- column
+  		     *	    ^-------- code
++ 		     *
++ 		     * SGR 1006 mouse reporting mode:
++ 		     * Almost identical to xterm mouse mode, except the values
++ 		     * are decimal instead of bytes.
++ 		     *
++ 		     * \033[<%d;%d;%dM
++ 		     *		   ^-- row
++ 		     *	        ^----- column
++ 		     *	     ^-------- code
++ 		     *
++ 		     * \033[<%d;%d;%dm        : mouse release event
++ 		     *		   ^-- row
++ 		     *	        ^----- column
++ 		     *	     ^-------- code
+  		     */
+  		    p = tp + slen;
+  
+***************
+*** 4263,4294 ****
+  		    if (*p++ != ';')
+  			return -1;
+  
+  		    mouse_col = getdigits(&p) - 1;
+  		    if (*p++ != ';')
+  			return -1;
+  
+  		    mouse_row = getdigits(&p) - 1;
+! 		    if (*p++ != 'M')
+  			return -1;
+  
+  		    slen += (int)(p - (tp + slen));
+  
+  		    /* skip this one if next one has same code (like xterm
+  		     * case) */
+  		    j = termcodes[idx].len;
+! 		    if (STRNCMP(tp, tp + slen, (size_t)j) == 0) {
+! 			/* check if the command is complete by looking for the
+! 			 * M */
+  			int slen2;
+  			int cmd_complete = 0;
+! 			for (slen2 = slen; slen2 < len; slen2++) {
+! 			    if (tp[slen2] == 'M') {
+  				cmd_complete = 1;
+  				break;
+  			    }
+  			}
+  			p += j;
+! 			if (cmd_complete && getdigits(&p) == mouse_code) {
+  			    slen += j; /* skip the \033[ */
+  			    continue;
+  			}
+--- 4303,4348 ----
+  		    if (*p++ != ';')
+  			return -1;
+  
++ 		    /* when mouse reporting is SGR, add 32 to mouse code */
++                     if (key_name[0] == KS_SGR_MOUSE)
++                         mouse_code += 32;
++ 
+  		    mouse_col = getdigits(&p) - 1;
+  		    if (*p++ != ';')
+  			return -1;
+  
+  		    mouse_row = getdigits(&p) - 1;
+!                     if (key_name[0] == KS_SGR_MOUSE && *p == 'm')
+! 			mouse_code |= MOUSE_RELEASE;
+!                     else if (*p != 'M')
+  			return -1;
++                     p++;
+  
+  		    slen += (int)(p - (tp + slen));
+  
+  		    /* skip this one if next one has same code (like xterm
+  		     * case) */
+  		    j = termcodes[idx].len;
+! 		    if (STRNCMP(tp, tp + slen, (size_t)j) == 0)
+! 		    {
+  			int slen2;
+  			int cmd_complete = 0;
+! 
+! 			/* check if the command is complete by looking for the
+! 			 * 'M' */
+! 			for (slen2 = slen; slen2 < len; slen2++)
+! 			{
+! 			    if (tp[slen2] == 'M'
+!                                 || (key_name[0] == KS_SGR_MOUSE
+! 							 && tp[slen2] == 'm'))
+! 			    {
+  				cmd_complete = 1;
+  				break;
+  			    }
+  			}
+  			p += j;
+! 			if (cmd_complete && getdigits(&p) == mouse_code)
+! 			{
+  			    slen += j; /* skip the \033[ */
+  			    continue;
+  			}
+***************
+*** 4302,4307 ****
+--- 4356,4364 ----
+  #ifdef FEAT_MOUSE_URXVT
+  	    || key_name[0] == (int)KS_URXVT_MOUSE
+  #endif
++ #ifdef FEAT_MOUSE_SGR
++ 	    || key_name[0] == KS_SGR_MOUSE
++ #endif
+  	    )
+  	{
+  #  if !defined(MSWIN) && !defined(MSDOS)
+*** ../vim-7.3.631/src/version.c	2012-08-15 14:04:50.000000000 +0200
+--- src/version.c	2012-08-15 15:47:30.000000000 +0200
+***************
+*** 384,389 ****
+--- 384,394 ----
+  # else
+  	"-mouse_urxvt",
+  # endif
++ # ifdef FEAT_MOUSE_SGR
++ 	"+mouse_sgr",
++ # else
++ 	"-mouse_sgr",
++ # endif
+  #endif
+  #ifdef __QNX__
+  # ifdef FEAT_MOUSE_PTERM
+*** ../vim-7.3.631/src/version.c	2012-08-15 14:04:50.000000000 +0200
+--- src/version.c	2012-08-15 15:47:30.000000000 +0200
+***************
+*** 716,717 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     632,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+243. You unsuccessfully try to download a pizza from www.dominos.com.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.633 b/source/ap/vim/patches/7.3.633
new file mode 100644
index 00000000..899ccb38
--- /dev/null
+++ b/source/ap/vim/patches/7.3.633
@@ -0,0 +1,81 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.633
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.633
+Problem:    Selection remains displayed as selected after selecting another
+	    text.
+Solution:   Call xterm_update() before select(). (Andrew Pimlott)
+Files:	    src/os_unix.c
+
+
+*** ../vim-7.3.632/src/os_unix.c	2012-08-15 16:20:59.000000000 +0200
+--- src/os_unix.c	2012-08-15 17:15:58.000000000 +0200
+***************
+*** 5196,5201 ****
+--- 5196,5205 ----
+  	    FD_SET(ConnectionNumber(xterm_dpy), &rfds);
+  	    if (maxfd < ConnectionNumber(xterm_dpy))
+  		maxfd = ConnectionNumber(xterm_dpy);
++ 
++ 	    /* An event may have already been read but not handled.  In
++ 	     * particulary, XFlush may cause this. */
++ 	    xterm_update();
+  	}
+  # endif
+  # ifdef FEAT_MOUSE_GPM
+***************
+*** 5216,5229 ****
+  		maxfd = xsmp_icefd;
+  	}
+  # endif
+! #ifdef FEAT_NETBEANS_INTG
+  	if (nb_fd != -1)
+  	{
+  	    FD_SET(nb_fd, &rfds);
+  	    if (maxfd < nb_fd)
+  		maxfd = nb_fd;
+  	}
+! #endif
+  
+  # ifdef OLD_VMS
+  	/* Old VMS as v6.2 and older have broken select(). It waits more than
+--- 5220,5233 ----
+  		maxfd = xsmp_icefd;
+  	}
+  # endif
+! # ifdef FEAT_NETBEANS_INTG
+  	if (nb_fd != -1)
+  	{
+  	    FD_SET(nb_fd, &rfds);
+  	    if (maxfd < nb_fd)
+  		maxfd = nb_fd;
+  	}
+! # endif
+  
+  # ifdef OLD_VMS
+  	/* Old VMS as v6.2 and older have broken select(). It waits more than
+*** ../vim-7.3.632/src/version.c	2012-08-15 16:20:59.000000000 +0200
+--- src/version.c	2012-08-15 17:22:17.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     633,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+245. You use Real Audio to listen to a radio station from a distant
+     city rather than turn on your stereo system.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.634 b/source/ap/vim/patches/7.3.634
new file mode 100644
index 00000000..3262bab3
--- /dev/null
+++ b/source/ap/vim/patches/7.3.634
@@ -0,0 +1,57 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.634
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.634
+Problem:    Month/Day format for undo is confusing. (Marcin Szamotulski)
+Solution:   Always use Year/Month/Day, should work for everybody.
+Files:      src/undo.c
+
+
+*** ../vim-7.3.633/src/undo.c	2012-06-01 13:46:06.000000000 +0200
+--- src/undo.c	2012-08-23 12:43:24.000000000 +0200
+***************
+*** 2880,2890 ****
+  	if (time(NULL) - tt < (60L * 60L * 12L))
+  	    /* within 12 hours */
+  	    (void)strftime((char *)buf, buflen, "%H:%M:%S", curtime);
+- 	else if (time(NULL) - tt < (60L * 60L * 24L * 180L))
+- 	    /* within 6 months */
+- 	    (void)strftime((char *)buf, buflen, "%m/%d %H:%M:%S", curtime);
+  	else
+! 	    /* long ago */
+  	    (void)strftime((char *)buf, buflen, "%Y/%m/%d %H:%M:%S", curtime);
+      }
+      else
+--- 2880,2887 ----
+  	if (time(NULL) - tt < (60L * 60L * 12L))
+  	    /* within 12 hours */
+  	    (void)strftime((char *)buf, buflen, "%H:%M:%S", curtime);
+  	else
+! 	    /* longer ago */
+  	    (void)strftime((char *)buf, buflen, "%Y/%m/%d %H:%M:%S", curtime);
+      }
+      else
+*** ../vim-7.3.633/src/version.c	2012-08-15 17:26:53.000000000 +0200
+--- src/version.c	2012-08-23 12:58:36.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     634,
+  /**/
+
+-- 
+hundred-and-one symptoms of being an internet addict:
+10E. You start counting in hex.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.635 b/source/ap/vim/patches/7.3.635
new file mode 100644
index 00000000..4a677025
--- /dev/null
+++ b/source/ap/vim/patches/7.3.635
@@ -0,0 +1,50 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.635
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.635
+Problem:    Issue 21: System call during startup sets 'lines' to a wrong
+	    value. (Karl Yngve)
+Solution:   Don't set the shell size while the GUI is still starting up.
+	    (Christian Brabandt)
+Files:	    src/ui.c
+
+
+*** ../vim-7.3.634/src/ui.c	2012-07-10 16:49:08.000000000 +0200
+--- src/ui.c	2012-08-23 13:25:26.000000000 +0200
+***************
+*** 298,303 ****
+--- 298,306 ----
+      int	    retval;
+  
+  #ifdef FEAT_GUI
++     if (gui.starting)
++ 	/* possibly a system call during startup, check later */
++ 	return OK;
+      if (gui.in_use)
+  	retval = gui_get_shellsize();
+      else
+*** ../vim-7.3.634/src/version.c	2012-08-23 12:58:56.000000000 +0200
+--- src/version.c	2012-08-23 13:27:00.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     635,
+  /**/
+
+-- 
+ARTHUR: This new learning amazes me, Sir Bedevere.  Explain again how sheep's
+        bladders may be employed to prevent earthquakes.
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.636 b/source/ap/vim/patches/7.3.636
new file mode 100644
index 00000000..453a7fc9
--- /dev/null
+++ b/source/ap/vim/patches/7.3.636
@@ -0,0 +1,148 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.636
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.636 (after 7.3.625)
+Problem:    Not all zero-width matches handled correctly for "gn".
+Solution:   Move zero-width detection to a separate function. (Christian
+	    Brabandt)
+Files:	    src/search.c
+
+
+*** ../vim-7.3.635/src/search.c	2012-08-08 15:27:54.000000000 +0200
+--- src/search.c	2012-08-23 15:52:50.000000000 +0200
+***************
+*** 4526,4531 ****
+--- 4526,4533 ----
+  #endif /* FEAT_TEXTOBJ */
+  
+  #if defined(FEAT_VISUAL) || defined(PROTO)
++ static int is_zerowidth __ARGS((char_u *pattern));
++ 
+  /*
+   * Find next search match under cursor, cursor at end.
+   * Used while an operator is pending, and in Visual mode.
+***************
+*** 4546,4556 ****
+      int		visual_active = FALSE;
+      int		flags = 0;
+      pos_T	save_VIsual;
+-     regmmatch_T	regmatch;
+-     int		nmatched = 0;
+      int		zerowidth = FALSE;
+  
+- 
+      /* wrapping should not occur */
+      p_ws = FALSE;
+  
+--- 4548,4555 ----
+***************
+*** 4583,4606 ****
+      else
+  	orig_pos = pos = start_pos = curwin->w_cursor;
+  
+!     /*
+!      * Check for zero-width pattern.
+!      */
+!     if (search_regcomp(spats[last_idx].pat, RE_SEARCH, RE_SEARCH,
+! 			     ((SEARCH_HIS + SEARCH_KEEP)), &regmatch) == FAIL)
+  	return FAIL;
+  
+-     /* Zero-width pattern should match somewhere, then we can check if start
+-      * and end are in the same position. */
+-     nmatched = vim_regexec_multi(&regmatch, curwin, curbuf,
+- 				     curwin->w_cursor.lnum, (colnr_T)0, NULL);
+-     if (called_emsg)
+- 	return FAIL;
+-     if (nmatched && regmatch.startpos[0].lnum == regmatch.endpos[0].lnum
+- 		 && regmatch.endpos[0].col == regmatch.startpos[0].col)
+- 	zerowidth = TRUE;
+-     vim_free(regmatch.regprog);
+- 
+      /*
+       * The trick is to first search backwards and then search forward again,
+       * so that a match at the current cursor position will be correctly
+--- 4582,4592 ----
+      else
+  	orig_pos = pos = start_pos = curwin->w_cursor;
+  
+!     /* Is the pattern is zero-width? */
+!     zerowidth = is_zerowidth(spats[last_idx].pat);
+!     if (zerowidth == -1)
+  	return FAIL;
+  
+      /*
+       * The trick is to first search backwards and then search forward again,
+       * so that a match at the current cursor position will be correctly
+***************
+*** 4693,4698 ****
+--- 4679,4721 ----
+  
+      return OK;
+  }
++ 
++ /*
++  * Check if the pattern is zero-width.
++  * Returns TRUE, FALSE or -1 for failure.
++  */
++     static int
++ is_zerowidth(pattern)
++     char_u	*pattern;
++ {
++     regmmatch_T	regmatch;
++     int		nmatched = 0;
++     int		result = -1;
++     pos_T       pos;
++ 
++     if (search_regcomp(pattern, RE_SEARCH, RE_SEARCH,
++ 					      SEARCH_KEEP, &regmatch) == FAIL)
++ 	return -1;
++ 
++     /* move to match */
++     clearpos(&pos);
++     if (searchit(curwin, curbuf, &pos, FORWARD, spats[last_idx].pat, 1,
++ 				     SEARCH_KEEP, RE_SEARCH, 0, NULL) != FAIL)
++     {
++ 	/* Zero-width pattern should match somewhere, then we can check if
++ 	 * start and end are in the same position. */
++ 	nmatched = vim_regexec_multi(&regmatch, curwin, curbuf,
++ 						  pos.lnum, (colnr_T)0, NULL);
++ 
++ 	if (!called_emsg)
++ 	    result = (nmatched != 0
++ 		    && regmatch.startpos[0].lnum == regmatch.endpos[0].lnum
++ 		    && regmatch.startpos[0].col == regmatch.endpos[0].col);
++     }
++ 
++     vim_free(regmatch.regprog);
++     return result;
++ }
+  #endif /* FEAT_VISUAL */
+  
+  #if defined(FEAT_LISP) || defined(FEAT_CINDENT) || defined(FEAT_TEXTOBJ) \
+*** ../vim-7.3.635/src/version.c	2012-08-23 13:28:50.000000000 +0200
+--- src/version.c	2012-08-23 15:25:23.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     636,
+  /**/
+
+-- 
+Edison's greatest achievement came in 1879, when he invented the
+electric company.  Edison's design was a brilliant adaptation of the
+simple electrical circuit: the electric company sends electricity
+through a wire to a customer, then immediately gets the electricity
+back through another wire
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.637 b/source/ap/vim/patches/7.3.637
new file mode 100644
index 00000000..f7f1d903
--- /dev/null
+++ b/source/ap/vim/patches/7.3.637
@@ -0,0 +1,94 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.637
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.637
+Problem:    Cannot catch the error caused by a foldopen when there is no fold.
+	    (ZyX, Issue 48)
+Solution:   Do not break out of the loop early when inside try/catch.
+	    (Christian Brabandt) Except when there is a syntax error.
+Files:	    src/ex_docmd.c, src/globals.h
+
+
+*** ../vim-7.3.636/src/ex_docmd.c	2012-08-15 14:04:50.000000000 +0200
+--- src/ex_docmd.c	2012-08-23 18:39:08.000000000 +0200
+***************
+*** 1295,1301 ****
+  		&& cstack.cs_trylevel == 0
+  #endif
+  	    )
+! 	    && !(did_emsg && used_getline
+  			    && (getline_equal(fgetline, cookie, getexmodeline)
+  			       || getline_equal(fgetline, cookie, getexline)))
+  	    && (next_cmdline != NULL
+--- 1295,1308 ----
+  		&& cstack.cs_trylevel == 0
+  #endif
+  	    )
+! 	    && !(did_emsg
+! #ifdef FEAT_EVAL
+! 		/* Keep going when inside try/catch, so that the error can be
+! 		 * dealth with, except when it is a syntax error, it may cause
+! 		 * the :endtry to be missed. */
+! 		&& (cstack.cs_trylevel == 0 || did_emsg_syntax)
+! #endif
+! 		&& used_getline
+  			    && (getline_equal(fgetline, cookie, getexmodeline)
+  			       || getline_equal(fgetline, cookie, getexline)))
+  	    && (next_cmdline != NULL
+***************
+*** 1305,1310 ****
+--- 1312,1318 ----
+  			|| (flags & DOCMD_REPEAT)));
+  
+      vim_free(cmdline_copy);
++     did_emsg_syntax = FALSE;
+  #ifdef FEAT_EVAL
+      free_cmdlines(&lines_ga);
+      ga_clear(&lines_ga);
+***************
+*** 2137,2142 ****
+--- 2145,2151 ----
+  	    if (!sourcing)
+  		append_command(*cmdlinep);
+  	    errormsg = IObuff;
++ 	    did_emsg_syntax = TRUE;
+  	}
+  	goto doend;
+      }
+*** ../vim-7.3.636/src/globals.h	2012-07-10 16:49:08.000000000 +0200
+--- src/globals.h	2012-08-23 18:29:09.000000000 +0200
+***************
+*** 183,188 ****
+--- 183,190 ----
+  #endif
+  EXTERN int	did_emsg;		    /* set by emsg() when the message
+  					       is displayed or thrown */
++ EXTERN int	did_emsg_syntax;	    /* did_emsg set because of a
++ 					       syntax error */
+  EXTERN int	called_emsg;		    /* always set by emsg() */
+  EXTERN int	ex_exitval INIT(= 0);	    /* exit value for ex mode */
+  EXTERN int	emsg_on_display INIT(= FALSE);	/* there is an error message */
+*** ../vim-7.3.636/src/version.c	2012-08-23 15:53:00.000000000 +0200
+--- src/version.c	2012-08-23 17:59:12.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     637,
+  /**/
+
+-- 
+GOD: That is your purpose Arthur ... the Quest for the Holy Grail ...
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.638 b/source/ap/vim/patches/7.3.638
new file mode 100644
index 00000000..f88a9399
--- /dev/null
+++ b/source/ap/vim/patches/7.3.638
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.638
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.638
+Problem:    Unecessary redraw of the previous character.
+Solution:   Check if the character is double-width. (Jon Long)
+Files:	    src/screen.c
+
+
+*** ../vim-7.3.637/src/screen.c	2012-07-10 16:49:08.000000000 +0200
+--- src/screen.c	2012-08-23 18:49:33.000000000 +0200
+***************
+*** 5332,5339 ****
+  		    && (ScreenLinesUC[off_from] != ScreenLinesUC[off_to]
+  			|| (ScreenLinesUC[off_from] != 0
+  			    && comp_char_differs(off_from, off_to))
+! 			|| (cols > 1 && ScreenLines[off_from + 1]
+! 						 != ScreenLines[off_to + 1])))
+  #endif
+  	       ))
+  	return TRUE;
+--- 5332,5340 ----
+  		    && (ScreenLinesUC[off_from] != ScreenLinesUC[off_to]
+  			|| (ScreenLinesUC[off_from] != 0
+  			    && comp_char_differs(off_from, off_to))
+! 			|| ((*mb_off2cells)(off_from, off_from + cols) > 1
+! 			    && ScreenLines[off_from + 1]
+! 						  != ScreenLines[off_to + 1])))
+  #endif
+  	       ))
+  	return TRUE;
+*** ../vim-7.3.637/src/version.c	2012-08-23 18:43:06.000000000 +0200
+--- src/version.c	2012-08-23 18:47:11.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     638,
+  /**/
+
+-- 
+There is a fine line between courage and foolishness.
+Unfortunately, it's not a fence.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.639 b/source/ap/vim/patches/7.3.639
new file mode 100644
index 00000000..359dc6d8
--- /dev/null
+++ b/source/ap/vim/patches/7.3.639
@@ -0,0 +1,846 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.639
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.639
+Problem:    It's not easy to build Vim on Windows with XPM support.
+Solution:   Include the required files, they are quite small.  Update the
+	    MSVC makefile to use them.  Binary files are in the next patch.
+	    (Sergey Khorev)
+Files:	    src/xpm/COPYRIGHT, src/xpm/README.txt, src/xpm/include/simx.h,
+	    src/xpm/include/xpm.h, src/Make_mvc.mak, src/bigvim.bat,
+	    src/bigvim64.bat, Filelist
+
+
+*** ../vim-7.3.638/src/xpm/COPYRIGHT	1970-01-01 01:00:00.000000000 +0100
+--- src/xpm/COPYRIGHT	1998-03-19 23:51:00.000000000 +0100
+***************
+*** 0 ****
+--- 1,31 ----
++ /*
++  * Copyright (C) 1989-95 GROUPE BULL
++  *
++  * Permission is hereby granted, free of charge, to any person obtaining a copy
++  * of this software and associated documentation files (the "Software"), to
++  * deal in the Software without restriction, including without limitation the
++  * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++  * sell copies of the Software, and to permit persons to whom the Software is
++  * furnished to do so, subject to the following conditions:
++  *
++  * The above copyright notice and this permission notice shall be included in
++  * all copies or substantial portions of the Software.
++  *
++  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
++  * GROUPE BULL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++  * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
++  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++  *
++  * Except as contained in this notice, the name of GROUPE BULL shall not be
++  * used in advertising or otherwise to promote the sale, use or other dealings
++  * in this Software without prior written authorization from GROUPE BULL.
++  */
++ 
++ Arnaud LE HORS      BULL Research FRANCE -- Koala Project 
++                     (XPM - X PixMap format version 2 & 3)
++     Internet:       lehors@sophia.inria.fr
++ Surface Mail:       Arnaud LE HORS, INRIA - Sophia Antipolis, 
++                     2004, route des Lucioles, 06565 Valbonne Cedex -- FRANCE
++  Voice phone:       (33) 93.65.77.71, Fax: (33) 93 65 77 66, Telex: 97 00 50 F
+*** ../vim-7.3.638/src/xpm/README.txt	1970-01-01 01:00:00.000000000 +0100
+--- src/xpm/README.txt	2012-08-29 13:29:17.000000000 +0200
+***************
+*** 0 ****
+--- 1,23 ----
++ This is XPM library compiled for Windows which is intended for use with Vim
++ 'signs' feature.
++ 
++ Libraries in x86 directory were compiled with MSVC6 and MinGW. Proposed
++ commands to compile Vim are:
++ 
++ Any version of MSVC starting from version 6.0:
++ nmake -f Make_mvc.mak GUI=yes CSCOPE=yes NETBEANS=yes XPM=e:\hg\xpm\x86
++ 
++ MinGW:
++ mingw32-make -f Make_ming.mak GUI=yes CSCOPE=yes XPM=e:/hg/xpm/x86
++ 
++ Microsoft Visual C++ on x64 (tested with versions 2008 and 2010):
++ nmake -f Make_mvc.mak GUI=yes CSCOPE=yes XPM=E:\HG\xpm\x64
++ 
++ To test, open some file in Vim and execute commands below:
++ :exe 'sign define vimxpm icon='.$VIMRUNTIME.'\\vim32x32.xpm'
++ :exe 'sign place 1 line=1 name=vimxpm file='.expand('%:p')
++ 
++ 
++ See COPYRIGHT for XPM licence.
++ 
++ If you have questions please email sergey.khorev@gmail.com.
+*** ../vim-7.3.638/src/xpm/include/simx.h	1970-01-01 01:00:00.000000000 +0100
+--- src/xpm/include/simx.h	1998-03-19 23:51:00.000000000 +0100
+***************
+*** 0 ****
+--- 1,139 ----
++ /*
++  * Copyright (C) 1989-95 GROUPE BULL
++  *
++  * Permission is hereby granted, free of charge, to any person obtaining a copy
++  * of this software and associated documentation files (the "Software"), to
++  * deal in the Software without restriction, including without limitation the
++  * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++  * sell copies of the Software, and to permit persons to whom the Software is
++  * furnished to do so, subject to the following conditions:
++  *
++  * The above copyright notice and this permission notice shall be included in
++  * all copies or substantial portions of the Software.
++  *
++  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
++  * GROUPE BULL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++  * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
++  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++  *
++  * Except as contained in this notice, the name of GROUPE BULL shall not be
++  * used in advertising or otherwise to promote the sale, use or other dealings
++  * in this Software without prior written authorization from GROUPE BULL.
++  */
++ 
++ /*****************************************************************************\
++ * simx.h: 0.1a                                                                *
++ *                                                                             *
++ * This emulates some Xlib functionality for MSW. It's not a general solution, *
++ * it is close related to XPM-lib. It is only intended to satisfy what is need *
++ * there. Thus allowing to read XPM files under MS windows.                    *
++ *                                                                             *
++ * Developed by HeDu 3/94 (hedu@cul-ipn.uni-kiel.de)                           *
++ \*****************************************************************************/
++ 
++ 
++ #ifndef _SIMX_H
++ #define _SIMX_H
++ 
++ #ifdef FOR_MSW
++ 
++ #include "windows.h"			/* MS windows GDI types */
++ 
++ /*
++  * minimal portability layer between ansi and KR C
++  */
++ /* this comes from xpm.h, and is here again, to avoid complicated
++     includes, since this is included from xpm.h */
++ /* these defines get undefed at the end of this file */
++ #if __STDC__ || defined(__cplusplus) || defined(c_plusplus)
++  /* ANSI || C++ */
++ #define FUNC(f, t, p) extern t f p
++ #define LFUNC(f, t, p) static t f p
++ #else /* k&R */
++ #define FUNC(f, t, p) extern t f()
++ #define LFUNC(f, t, p) static t f()
++ #endif
++ 
++ 
++ FUNC(boundCheckingMalloc, void *, (long s));
++ FUNC(boundCheckingCalloc, void *, (long num, long s));
++ FUNC(boundCheckingRealloc, void *, (void *p, long s));
++ 
++ /* define MSW types for X window types,
++    I don't know much about MSW, but the following defines do the job */
++ 
++ typedef HDC Display;			/* this should be similar */
++ typedef void *Screen;			/* not used */
++ typedef void *Visual;			/* not used yet, is for GRAY, COLOR,
++ 					 * MONO */
++ 
++ typedef void *Colormap;			/* should be COLORPALETTE, not done
++ 					 * yet */
++ 
++ typedef COLORREF Pixel;
++ 
++ #define PIXEL_ALREADY_TYPEDEFED		/* to let xpm.h know about it */
++ 
++ typedef struct {
++     Pixel pixel;
++     BYTE red, green, blue;
++ }      XColor;
++ 
++ typedef struct {
++     HBITMAP bitmap;
++     unsigned int width;
++     unsigned int height;
++     unsigned int depth;
++ }      XImage;
++ 
++ #if defined(__cplusplus) || defined(c_plusplus)
++ extern "C" {
++ #endif
++ /* some replacements for X... functions */
++ 
++ /* XDefaultXXX */
++     FUNC(XDefaultVisual, Visual *, (Display *display, Screen *screen));
++     FUNC(XDefaultScreen, Screen *, (Display *d));
++     FUNC(XDefaultColormap, Colormap *, (Display *display, Screen *screen));
++     FUNC(XDefaultDepth, int, (Display *d, Screen *s));
++ 
++ /* color related */
++     FUNC(XParseColor, int, (Display *, Colormap *, char *, XColor *));
++     FUNC(XAllocColor, int, (Display *, Colormap *, XColor *));
++     FUNC(XQueryColors, void, (Display *display, Colormap *colormap,
++ 			      XColor *xcolors, int ncolors));
++     FUNC(XFreeColors, int, (Display *d, Colormap cmap,
++ 			    unsigned long pixels[],
++ 			    int npixels, unsigned long planes));
++ /* XImage */
++     FUNC(XCreateImage, XImage *, (Display *, Visual *, int depth, int format,
++ 				  int x, int y, int width, int height,
++ 				  int pad, int foo));
++ 
++ /* free and destroy bitmap */
++     FUNC(XDestroyImage, void /* ? */ , (XImage *));
++ /* free only, bitmap remains */
++     FUNC(XImageFree, void, (XImage *));
++ #if defined(__cplusplus) || defined(c_plusplus)
++ } /* end of extern "C" */
++ #endif /* cplusplus */
++ 
++ #define ZPixmap 1			/* not really used */
++ #define XYBitmap 1			/* not really used */
++ 
++ #ifndef True
++ #define True 1
++ #define False 0
++ #endif
++ #ifndef Bool
++ typedef BOOL Bool;		/* take MSW bool */
++ #endif
++ /* make these local here, simx.c gets the same from xpm.h */
++ #undef LFUNC
++ #undef FUNC
++ 
++ #endif /* def FOR_MSW */
++ 
++ #endif /* _SIMX_H */
+*** ../vim-7.3.638/src/xpm/include/xpm.h	1970-01-01 01:00:00.000000000 +0100
+--- src/xpm/include/xpm.h	1998-03-19 23:51:00.000000000 +0100
+***************
+*** 0 ****
+--- 1,501 ----
++ /*
++  * Copyright (C) 1989-95 GROUPE BULL
++  *
++  * Permission is hereby granted, free of charge, to any person obtaining a copy
++  * of this software and associated documentation files (the "Software"), to
++  * deal in the Software without restriction, including without limitation the
++  * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++  * sell copies of the Software, and to permit persons to whom the Software is
++  * furnished to do so, subject to the following conditions:
++  *
++  * The above copyright notice and this permission notice shall be included in
++  * all copies or substantial portions of the Software.
++  *
++  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
++  * GROUPE BULL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++  * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
++  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++  *
++  * Except as contained in this notice, the name of GROUPE BULL shall not be
++  * used in advertising or otherwise to promote the sale, use or other dealings
++  * in this Software without prior written authorization from GROUPE BULL.
++  */
++ 
++ /*****************************************************************************\
++ * xpm.h:                                                                      *
++ *                                                                             *
++ *  XPM library                                                                *
++ *  Include file                                                               *
++ *                                                                             *
++ *  Developed by Arnaud Le Hors                                                *
++ \*****************************************************************************/
++ 
++ /*
++  * The code related to FOR_MSW has been added by
++  * HeDu (hedu@cul-ipn.uni-kiel.de) 4/94
++  */
++ 
++ /*
++  * The code related to AMIGA has been added by
++  * Lorens Younes (d93-hyo@nada.kth.se) 4/96
++  */
++ 
++ #ifndef XPM_h
++ #define XPM_h
++ 
++ /*
++  * first some identification numbers:
++  * the version and revision numbers are determined with the following rule:
++  * SO Major number = LIB minor version number.
++  * SO Minor number = LIB sub-minor version number.
++  * e.g: Xpm version 3.2f
++  *      we forget the 3 which is the format number, 2 gives 2, and f gives 6.
++  *      thus we have XpmVersion = 2 and XpmRevision = 6
++  *      which gives  SOXPMLIBREV = 2.6
++  *
++  * Then the XpmIncludeVersion number is built from these numbers.
++  */
++ #define XpmFormat 3
++ #define XpmVersion 4
++ #define XpmRevision 11
++ #define XpmIncludeVersion ((XpmFormat * 100 + XpmVersion) * 100 + XpmRevision)
++ 
++ #ifndef XPM_NUMBERS
++ 
++ #ifdef FOR_MSW
++ # define SYSV			/* uses memcpy string.h etc. */
++ # include <malloc.h>
++ # include "simx.h"		/* defines some X stuff using MSW types */
++ #define NEED_STRCASECMP		/* at least for MSVC++ */
++ #else /* FOR_MSW */
++ # ifdef AMIGA
++ #  include "amigax.h"
++ # else /* not AMIGA */
++ #  include <X11/Xlib.h>
++ #  include <X11/Xutil.h>
++ # endif /* not AMIGA */
++ #endif /* FOR_MSW */
++ 
++ /* let's define Pixel if it is not done yet */
++ #if ! defined(_XtIntrinsic_h) && ! defined(PIXEL_ALREADY_TYPEDEFED)
++ typedef unsigned long Pixel;	/* Index into colormap */
++ # define PIXEL_ALREADY_TYPEDEFED
++ #endif
++ 
++ /* make sure we know whether function prototypes are needed or not */
++ #ifndef NeedFunctionPrototypes
++ # if defined(__STDC__) || defined(__cplusplus) || defined(c_plusplus)
++ #  define NeedFunctionPrototypes 1
++ # else
++ #  define NeedFunctionPrototypes 0
++ # endif
++ #endif
++ 
++ 
++ /* Return ErrorStatus codes:
++  * null     if full success
++  * positive if partial success
++  * negative if failure
++  */
++ 
++ #define XpmColorError    1
++ #define XpmSuccess       0
++ #define XpmOpenFailed   -1
++ #define XpmFileInvalid  -2
++ #define XpmNoMemory     -3
++ #define XpmColorFailed  -4
++ 
++ typedef struct {
++     char *name;			/* Symbolic color name */
++     char *value;		/* Color value */
++     Pixel pixel;		/* Color pixel */
++ }      XpmColorSymbol;
++ 
++ typedef struct {
++     char *name;			/* name of the extension */
++     unsigned int nlines;	/* number of lines in this extension */
++     char **lines;		/* pointer to the extension array of strings */
++ }      XpmExtension;
++ 
++ typedef struct {
++     char *string;		/* characters string */
++     char *symbolic;		/* symbolic name */
++     char *m_color;		/* monochrom default */
++     char *g4_color;		/* 4 level grayscale default */
++     char *g_color;		/* other level grayscale default */
++     char *c_color;		/* color default */
++ }      XpmColor;
++ 
++ typedef struct {
++     unsigned int width;		/* image width */
++     unsigned int height;	/* image height */
++     unsigned int cpp;		/* number of characters per pixel */
++     unsigned int ncolors;	/* number of colors */
++     XpmColor *colorTable;	/* list of related colors */
++     unsigned int *data;		/* image data */
++ }      XpmImage;
++ 
++ typedef struct {
++     unsigned long valuemask;	/* Specifies which attributes are defined */
++     char *hints_cmt;		/* Comment of the hints section */
++     char *colors_cmt;		/* Comment of the colors section */
++     char *pixels_cmt;		/* Comment of the pixels section */
++     unsigned int x_hotspot;	/* Returns the x hotspot's coordinate */
++     unsigned int y_hotspot;	/* Returns the y hotspot's coordinate */
++     unsigned int nextensions;	/* number of extensions */
++     XpmExtension *extensions;	/* pointer to array of extensions */
++ }      XpmInfo;
++ 
++ typedef int (*XpmAllocColorFunc)(
++ #if NeedFunctionPrototypes
++     Display*			/* display */,
++     Colormap			/* colormap */,
++     char*			/* colorname */,
++     XColor*			/* xcolor */,
++     void*			/* closure */
++ #endif
++ );
++ 
++ typedef int (*XpmFreeColorsFunc)(
++ #if NeedFunctionPrototypes
++     Display*			/* display */,
++     Colormap			/* colormap */,
++     Pixel*			/* pixels */,
++     int				/* npixels */,
++     void*			/* closure */
++ #endif
++ );
++ 
++ typedef struct {
++     unsigned long valuemask;		/* Specifies which attributes are
++ 					   defined */
++ 
++     Visual *visual;			/* Specifies the visual to use */
++     Colormap colormap;			/* Specifies the colormap to use */
++     unsigned int depth;			/* Specifies the depth */
++     unsigned int width;			/* Returns the width of the created
++ 					   pixmap */
++     unsigned int height;		/* Returns the height of the created
++ 					   pixmap */
++     unsigned int x_hotspot;		/* Returns the x hotspot's
++ 					   coordinate */
++     unsigned int y_hotspot;		/* Returns the y hotspot's
++ 					   coordinate */
++     unsigned int cpp;			/* Specifies the number of char per
++ 					   pixel */
++     Pixel *pixels;			/* List of used color pixels */
++     unsigned int npixels;		/* Number of used pixels */
++     XpmColorSymbol *colorsymbols;	/* List of color symbols to override */
++     unsigned int numsymbols;		/* Number of symbols */
++     char *rgb_fname;			/* RGB text file name */
++     unsigned int nextensions;		/* Number of extensions */
++     XpmExtension *extensions;		/* List of extensions */
++ 
++     unsigned int ncolors;               /* Number of colors */
++     XpmColor *colorTable;               /* List of colors */
++ /* 3.2 backward compatibility code */
++     char *hints_cmt;                    /* Comment of the hints section */
++     char *colors_cmt;                   /* Comment of the colors section */
++     char *pixels_cmt;                   /* Comment of the pixels section */
++ /* end 3.2 bc */
++     unsigned int mask_pixel;            /* Color table index of transparent
++                                            color */
++ 
++     /* Color Allocation Directives */
++     Bool exactColors;			/* Only use exact colors for visual */
++     unsigned int closeness;		/* Allowable RGB deviation */
++     unsigned int red_closeness;		/* Allowable red deviation */
++     unsigned int green_closeness;	/* Allowable green deviation */
++     unsigned int blue_closeness;	/* Allowable blue deviation */
++     int color_key;			/* Use colors from this color set */
++ 
++     Pixel *alloc_pixels;		/* Returns the list of alloc'ed color
++ 					   pixels */
++     int nalloc_pixels;			/* Returns the number of alloc'ed
++ 					   color pixels */
++ 
++     Bool alloc_close_colors;    	/* Specify whether close colors should
++ 					   be allocated using XAllocColor
++ 					   or not */
++     int bitmap_format;			/* Specify the format of 1bit depth
++ 					   images: ZPixmap or XYBitmap */
++ 
++     /* Color functions */
++     XpmAllocColorFunc alloc_color;	/* Application color allocator */
++     XpmFreeColorsFunc free_colors;	/* Application color de-allocator */
++     void *color_closure;		/* Application private data to pass to
++ 					   alloc_color and free_colors */
++ 
++ }      XpmAttributes;
++ 
++ /* XpmAttributes value masks bits */
++ #define XpmVisual	   (1L<<0)
++ #define XpmColormap	   (1L<<1)
++ #define XpmDepth	   (1L<<2)
++ #define XpmSize		   (1L<<3)	/* width & height */
++ #define XpmHotspot	   (1L<<4)	/* x_hotspot & y_hotspot */
++ #define XpmCharsPerPixel   (1L<<5)
++ #define XpmColorSymbols	   (1L<<6)
++ #define XpmRgbFilename	   (1L<<7)
++ /* 3.2 backward compatibility code */
++ #define XpmInfos	   (1L<<8)
++ #define XpmReturnInfos	   XpmInfos
++ /* end 3.2 bc */
++ #define XpmReturnPixels	   (1L<<9)
++ #define XpmExtensions      (1L<<10)
++ #define XpmReturnExtensions XpmExtensions
++ 
++ #define XpmExactColors     (1L<<11)
++ #define XpmCloseness	   (1L<<12)
++ #define XpmRGBCloseness	   (1L<<13)
++ #define XpmColorKey	   (1L<<14)
++ 
++ #define XpmColorTable      (1L<<15)
++ #define XpmReturnColorTable XpmColorTable
++ 
++ #define XpmReturnAllocPixels (1L<<16)
++ #define XpmAllocCloseColors (1L<<17)
++ #define XpmBitmapFormat    (1L<<18)
++ 
++ #define XpmAllocColor      (1L<<19)
++ #define XpmFreeColors      (1L<<20)
++ #define XpmColorClosure    (1L<<21)
++ 
++ 
++ /* XpmInfo value masks bits */
++ #define XpmComments        XpmInfos
++ #define XpmReturnComments  XpmComments
++ 
++ /* XpmAttributes mask_pixel value when there is no mask */
++ #ifndef FOR_MSW
++ #define XpmUndefPixel 0x80000000
++ #else
++ /* int is only 16 bit for MSW */
++ #define XpmUndefPixel 0x8000
++ #endif
++ 
++ /*
++  * color keys for visual type, they must fit along with the number key of
++  * each related element in xpmColorKeys[] defined in XpmI.h
++  */
++ #define XPM_MONO	2
++ #define XPM_GREY4	3
++ #define XPM_GRAY4	3
++ #define XPM_GREY 	4
++ #define XPM_GRAY 	4
++ #define XPM_COLOR	5
++ 
++ 
++ /* macros for forward declarations of functions with prototypes */
++ #if NeedFunctionPrototypes
++ #define FUNC(f, t, p) extern t f p
++ #define LFUNC(f, t, p) static t f p
++ #else
++ #define FUNC(f, t, p) extern t f()
++ #define LFUNC(f, t, p) static t f()
++ #endif
++ 
++ 
++ /*
++  * functions declarations
++  */
++ 
++ #ifdef __cplusplus
++ extern "C" {
++ #endif
++ 
++ /* FOR_MSW, all ..Pixmap.. are excluded, only the ..XImage.. are used */
++ /* Same for Amiga! */
++ 
++ #if !defined(FOR_MSW) && !defined(AMIGA)
++     FUNC(XpmCreatePixmapFromData, int, (Display *display,
++ 					Drawable d,
++ 					char **data,
++ 					Pixmap *pixmap_return,
++ 					Pixmap *shapemask_return,
++ 					XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateDataFromPixmap, int, (Display *display,
++ 					char ***data_return,
++ 					Pixmap pixmap,
++ 					Pixmap shapemask,
++ 					XpmAttributes *attributes));
++ 
++     FUNC(XpmReadFileToPixmap, int, (Display *display,
++ 				    Drawable d,
++ 				    char *filename,
++ 				    Pixmap *pixmap_return,
++ 				    Pixmap *shapemask_return,
++ 				    XpmAttributes *attributes));
++ 
++     FUNC(XpmWriteFileFromPixmap, int, (Display *display,
++ 				       char *filename,
++ 				       Pixmap pixmap,
++ 				       Pixmap shapemask,
++ 				       XpmAttributes *attributes));
++ #endif
++ 
++     FUNC(XpmCreateImageFromData, int, (Display *display,
++ 				       char **data,
++ 				       XImage **image_return,
++ 				       XImage **shapemask_return,
++ 				       XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateDataFromImage, int, (Display *display,
++ 				       char ***data_return,
++ 				       XImage *image,
++ 				       XImage *shapeimage,
++ 				       XpmAttributes *attributes));
++ 
++     FUNC(XpmReadFileToImage, int, (Display *display,
++ 				   char *filename,
++ 				   XImage **image_return,
++ 				   XImage **shapeimage_return,
++ 				   XpmAttributes *attributes));
++ 
++     FUNC(XpmWriteFileFromImage, int, (Display *display,
++ 				      char *filename,
++ 				      XImage *image,
++ 				      XImage *shapeimage,
++ 				      XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateImageFromBuffer, int, (Display *display,
++ 					 char *buffer,
++ 					 XImage **image_return,
++ 					 XImage **shapemask_return,
++ 					 XpmAttributes *attributes));
++ #if !defined(FOR_MSW) && !defined(AMIGA)
++     FUNC(XpmCreatePixmapFromBuffer, int, (Display *display,
++ 					  Drawable d,
++ 					  char *buffer,
++ 					  Pixmap *pixmap_return,
++ 					  Pixmap *shapemask_return,
++ 					  XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateBufferFromImage, int, (Display *display,
++ 					 char **buffer_return,
++ 					 XImage *image,
++ 					 XImage *shapeimage,
++ 					 XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateBufferFromPixmap, int, (Display *display,
++ 					  char **buffer_return,
++ 					  Pixmap pixmap,
++ 					  Pixmap shapemask,
++ 					  XpmAttributes *attributes));
++ #endif
++     FUNC(XpmReadFileToBuffer, int, (char *filename, char **buffer_return));
++     FUNC(XpmWriteFileFromBuffer, int, (char *filename, char *buffer));
++ 
++     FUNC(XpmReadFileToData, int, (char *filename, char ***data_return));
++     FUNC(XpmWriteFileFromData, int, (char *filename, char **data));
++ 
++     FUNC(XpmAttributesSize, int, ());
++     FUNC(XpmFreeAttributes, void, (XpmAttributes *attributes));
++     FUNC(XpmFreeExtensions, void, (XpmExtension *extensions,
++ 				   int nextensions));
++ 
++     FUNC(XpmFreeXpmImage, void, (XpmImage *image));
++     FUNC(XpmFreeXpmInfo, void, (XpmInfo *info));
++     FUNC(XpmGetErrorString, char *, (int errcode));
++     FUNC(XpmLibraryVersion, int, ());
++ 
++     /* XpmImage functions */
++     FUNC(XpmReadFileToXpmImage, int, (char *filename,
++ 				      XpmImage *image,
++ 				      XpmInfo *info));
++ 
++     FUNC(XpmWriteFileFromXpmImage, int, (char *filename,
++ 					 XpmImage *image,
++ 					 XpmInfo *info));
++ #if !defined(FOR_MSW) && !defined(AMIGA)
++     FUNC(XpmCreatePixmapFromXpmImage, int, (Display *display,
++ 					    Drawable d,
++ 					    XpmImage *image,
++ 					    Pixmap *pixmap_return,
++ 					    Pixmap *shapemask_return,
++ 					    XpmAttributes *attributes));
++ #endif
++     FUNC(XpmCreateImageFromXpmImage, int, (Display *display,
++ 					   XpmImage *image,
++ 					   XImage **image_return,
++ 					   XImage **shapeimage_return,
++ 					   XpmAttributes *attributes));
++ 
++     FUNC(XpmCreateXpmImageFromImage, int, (Display *display,
++ 					   XImage *image,
++ 					   XImage *shapeimage,
++ 					   XpmImage *xpmimage,
++ 					   XpmAttributes *attributes));
++ #if !defined(FOR_MSW) && !defined(AMIGA)
++     FUNC(XpmCreateXpmImageFromPixmap, int, (Display *display,
++ 					    Pixmap pixmap,
++ 					    Pixmap shapemask,
++ 					    XpmImage *xpmimage,
++ 					    XpmAttributes *attributes));
++ #endif
++     FUNC(XpmCreateDataFromXpmImage, int, (char ***data_return,
++ 					  XpmImage *image,
++ 					  XpmInfo *info));
++ 
++     FUNC(XpmCreateXpmImageFromData, int, (char **data,
++ 					  XpmImage *image,
++ 					  XpmInfo *info));
++ 
++     FUNC(XpmCreateXpmImageFromBuffer, int, (char *buffer,
++ 					    XpmImage *image,
++ 					    XpmInfo *info));
++ 
++     FUNC(XpmCreateBufferFromXpmImage, int, (char **buffer_return,
++ 					    XpmImage *image,
++ 					    XpmInfo *info));
++ 
++     FUNC(XpmGetParseError, int, (char *filename,
++ 				 int *linenum_return,
++ 				 int *charnum_return));
++ 
++     FUNC(XpmFree, void, (void *ptr));
++ 
++ #ifdef __cplusplus
++ } /* for C++ V2.0 */
++ #endif
++ 
++ 
++ /* backward compatibility */
++ 
++ /* for version 3.0c */
++ #define XpmPixmapColorError  XpmColorError
++ #define XpmPixmapSuccess     XpmSuccess
++ #define XpmPixmapOpenFailed  XpmOpenFailed
++ #define XpmPixmapFileInvalid XpmFileInvalid
++ #define XpmPixmapNoMemory    XpmNoMemory
++ #define XpmPixmapColorFailed XpmColorFailed
++ 
++ #define XpmReadPixmapFile(dpy, d, file, pix, mask, att) \
++     XpmReadFileToPixmap(dpy, d, file, pix, mask, att)
++ #define XpmWritePixmapFile(dpy, file, pix, mask, att) \
++     XpmWriteFileFromPixmap(dpy, file, pix, mask, att)
++ 
++ /* for version 3.0b */
++ #define PixmapColorError  XpmColorError
++ #define PixmapSuccess     XpmSuccess
++ #define PixmapOpenFailed  XpmOpenFailed
++ #define PixmapFileInvalid XpmFileInvalid
++ #define PixmapNoMemory    XpmNoMemory
++ #define PixmapColorFailed XpmColorFailed
++ 
++ #define ColorSymbol XpmColorSymbol
++ 
++ #define XReadPixmapFile(dpy, d, file, pix, mask, att) \
++     XpmReadFileToPixmap(dpy, d, file, pix, mask, att)
++ #define XWritePixmapFile(dpy, file, pix, mask, att) \
++     XpmWriteFileFromPixmap(dpy, file, pix, mask, att)
++ #define XCreatePixmapFromData(dpy, d, data, pix, mask, att) \
++     XpmCreatePixmapFromData(dpy, d, data, pix, mask, att)
++ #define XCreateDataFromPixmap(dpy, data, pix, mask, att) \
++     XpmCreateDataFromPixmap(dpy, data, pix, mask, att)
++ 
++ #endif /* XPM_NUMBERS */
++ #endif
+*** ../vim-7.3.638/src/Make_mvc.mak	2012-08-02 21:48:20.000000000 +0200
+--- src/Make_mvc.mak	2012-08-29 13:46:05.000000000 +0200
+***************
+*** 89,94 ****
+--- 89,96 ----
+  #       Netbeans Support: NETBEANS=[yes or no] (default is yes if GUI is yes)
+  #
+  #       XPM Image Support: XPM=[path to XPM directory]
++ #       Default is "xpm", using the files included in the distribution.
++ #       Use "no" to disable this feature.
+  #
+  #       Optimization: OPTIMIZE=[SPACE, SPEED, MAXSPEED] (default is MAXSPEED)
+  #
+***************
+*** 279,295 ****
+  NETBEANS_LIB	= WSock32.lib
+  !endif
+  
+! !ifdef XPM
+  # XPM - Include support for XPM signs
+! # You need to download or build  xpm.lib somehow.
+! # You can get the most recent version of libXpm-*.zip from
+! #   http://cgit.freedesktop.org/xorg/lib/libXpm
+! # from which you must build xpm.lib yourself
+! #   OR get and unpack: ftp://ftp.vim.org/pub/vim/pcextra/xpm.zip
+  XPM_OBJ   = $(OBJDIR)/xpm_w32.obj
+  XPM_DEFS  = -DFEAT_XPM_W32
+  XPM_LIB   = $(XPM)\lib\libXpm.lib
+! XPM_INC	  = -I $(XPM)\include
+  !endif
+  !endif
+  
+--- 281,301 ----
+  NETBEANS_LIB	= WSock32.lib
+  !endif
+  
+! !ifndef XPM
+! # XPM is not set, use the included xpm files, depending on the architecture.
+! !if ("$(CPU)" == "AMD64") || ("$(CPU)" == "IA64")
+! XPM = xpm\x64
+! !else
+! XPM = xpm\x86
+! !endif
+! !endif
+! !if "$(XPM)" != "no"
+  # XPM - Include support for XPM signs
+! # See the xpm directory for more information.
+  XPM_OBJ   = $(OBJDIR)/xpm_w32.obj
+  XPM_DEFS  = -DFEAT_XPM_W32
+  XPM_LIB   = $(XPM)\lib\libXpm.lib
+! XPM_INC	  = -I $(XPM)\include -I $(XPM)\..\include
+  !endif
+  !endif
+  
+*** ../vim-7.3.638/src/bigvim.bat	2010-08-15 21:57:29.000000000 +0200
+--- src/bigvim.bat	2012-08-29 13:46:18.000000000 +0200
+***************
+*** 1,3 ****
+  :: command to build big Vim with OLE, Perl, Python, Ruby and Tcl
+! nmake -f Make_mvc.mak GUI=yes OLE=yes PERL=E:\perl512 DYNAMIC_PERL=yes PERL_VER=512 PYTHON=e:\python27 DYNAMIC_PYTHON=yes PYTHON_VER=27 PYTHON3=e:\python31 DYNAMIC_PYTHON3=yes PYTHON3_VER=31 RUBY=e:\ruby191 DYNAMIC_RUBY=yes RUBY_VER=191 RUBY_VER_LONG=1.9.1 TCL=e:\tcl DYNAMIC_TCL=yes %1 IME=yes CSCOPE=yes XPM=e:\xpm
+  
+--- 1,5 ----
+  :: command to build big Vim with OLE, Perl, Python, Ruby and Tcl
+! SET VCDIR="C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\"
+! SET TOOLDIR=E:\
+! %VCDIR%nmake -f Make_mvc.mak GUI=yes OLE=yes PERL=E:\perl514 DYNAMIC_PERL=yes PERL_VER=514 PYTHON=%TOOLDIR%python27 DYNAMIC_PYTHON=yes PYTHON_VER=27 PYTHON3=%TOOLDIR%python32 DYNAMIC_PYTHON3=yes PYTHON3_VER=32 RUBY=%TOOLDIR%ruby192 DYNAMIC_RUBY=yes RUBY_VER=192 RUBY_VER_LONG=1.9.2 TCL=%TOOLDIR%tcl TCL_VER=85 TCL_VER_LONG=8.5 DYNAMIC_TCL=yes %1 IME=yes CSCOPE=yes
+  
+*** ../vim-7.3.638/src/bigvim64.bat	2012-08-29 14:16:38.000000000 +0200
+--- src/bigvim64.bat	2012-08-29 13:46:35.000000000 +0200
+***************
+*** 0 ****
+--- 1,6 ----
++ :: command to build big Vim 64 bit with OLE, Perl, Python, Ruby and Tcl
++ :: First run: %VCDIR%\vcvarsall.bat x86_amd64
++ SET VCDIR="C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\"
++ SET TOOLDIR=E:\
++ %VCDIR%\bin\nmake -f Make_mvc.mak CPU=AMD64 GUI=yes OLE=yes PERL=E:\perl514 DYNAMIC_PERL=yes PERL_VER=514 PYTHON=%TOOLDIR%python27 DYNAMIC_PYTHON=yes PYTHON_VER=27 PYTHON3=%TOOLDIR%python32 DYNAMIC_PYTHON3=yes PYTHON3_VER=32 RUBY=%TOOLDIR%ruby192 DYNAMIC_RUBY=yes RUBY_VER=192 RUBY_VER_LONG=1.9.2 TCL=%TOOLDIR%tcl TCL_VER=85 TCL_VER_LONG=8.5 DYNAMIC_TCL=yes %1 IME=yes CSCOPE=yes
++ 
+*** ../vim-7.3.638/Filelist	2012-07-16 17:27:57.000000000 +0200
+--- Filelist	2012-08-29 13:53:52.000000000 +0200
+***************
+*** 349,354 ****
+--- 349,360 ----
+  		src/vim*.ico \
+  		src/vim.tlb \
+  		src/vimtbar.lib \
++ 		src/xpm/COPYRIGHT \
++ 		src/xpm/README.txt \
++ 		src/xpm/include/*.h \
++ 		src/xpm/x64/lib/libXpm.lib \
++ 		src/xpm/x86/lib/libXpm.a \
++ 		src/xpm/x86/lib/libXpm.lib \
+  		src/vimtbar.dll \
+  		nsis/icons/*.bmp \
+  		nsis/icons/*.ico \
+*** ../vim-7.3.638/src/version.c	2012-08-29 14:17:51.000000000 +0200
+--- src/version.c	2012-08-29 14:14:19.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     639,
+  /**/
+
+-- 
+A successful man is one who makes more money than his wife can spend.
+A successful woman is one who can find such a man.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.640 b/source/ap/vim/patches/7.3.640
new file mode 100644
index 00000000..984df640
--- /dev/null
+++ b/source/ap/vim/patches/7.3.640
diff --git a/source/ap/vim/patches/7.3.641 b/source/ap/vim/patches/7.3.641
new file mode 100644
index 00000000..daacdb4f
--- /dev/null
+++ b/source/ap/vim/patches/7.3.641
@@ -0,0 +1,68 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.641
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.641
+Problem:    ":mkview" uses ":normal" instead of ":normal!" for folds. (Dan)
+Solution:   Add the bang. (Christian Brabandt)
+Files:	    src/fold.c
+
+
+*** ../vim-7.3.640/src/fold.c	2012-08-08 18:01:00.000000000 +0200
+--- src/fold.c	2012-08-29 15:17:39.000000000 +0200
+***************
+*** 3373,3379 ****
+  		/* open nested folds while this fold is open */
+  		if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  			|| put_eol(fd) == FAIL
+! 			|| put_line(fd, "normal zo") == FAIL)
+  		    return FAIL;
+  		if (put_foldopen_recurse(fd, wp, &fp->fd_nested,
+  							     off + fp->fd_top)
+--- 3373,3379 ----
+  		/* open nested folds while this fold is open */
+  		if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  			|| put_eol(fd) == FAIL
+! 			|| put_line(fd, "normal! zo") == FAIL)
+  		    return FAIL;
+  		if (put_foldopen_recurse(fd, wp, &fp->fd_nested,
+  							     off + fp->fd_top)
+***************
+*** 3417,3423 ****
+  {
+      if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  	    || put_eol(fd) == FAIL
+! 	    || fprintf(fd, "normal z%c",
+  			   fp->fd_flags == FD_CLOSED ? 'c' : 'o') < 0
+  	    || put_eol(fd) == FAIL)
+  	return FAIL;
+--- 3417,3423 ----
+  {
+      if (fprintf(fd, "%ld", fp->fd_top + off) < 0
+  	    || put_eol(fd) == FAIL
+! 	    || fprintf(fd, "normal! z%c",
+  			   fp->fd_flags == FD_CLOSED ? 'c' : 'o') < 0
+  	    || put_eol(fd) == FAIL)
+  	return FAIL;
+*** ../vim-7.3.640/src/version.c	2012-08-29 14:23:06.000000000 +0200
+--- src/version.c	2012-08-29 15:18:26.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     641,
+  /**/
+
+-- 
+You cannot propel yourself forward by patting yourself on the back.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.642 b/source/ap/vim/patches/7.3.642
new file mode 100644
index 00000000..ddc40321
--- /dev/null
+++ b/source/ap/vim/patches/7.3.642
@@ -0,0 +1,55 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.642
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.642
+Problem:    Segfault with specific autocommands.  Was OK after 7.3.449 and
+	    before 7.3.545. (Richard Brown)
+Solution:   Pass TRUE for abort_if_last in the call to close_buffer().
+	    (Christian Brabandt)
+Files:	    src/window.c
+
+
+*** ../vim-7.3.641/src/window.c	2012-07-19 18:05:40.000000000 +0200
+--- src/window.c	2012-08-29 15:42:15.000000000 +0200
+***************
+*** 2269,2275 ****
+  #ifdef FEAT_AUTOCMD
+  	win->w_closing = TRUE;
+  #endif
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, FALSE);
+  #ifdef FEAT_AUTOCMD
+  	if (win_valid(win))
+  	    win->w_closing = FALSE;
+--- 2269,2275 ----
+  #ifdef FEAT_AUTOCMD
+  	win->w_closing = TRUE;
+  #endif
+! 	close_buffer(win, win->w_buffer, free_buf ? DOBUF_UNLOAD : 0, TRUE);
+  #ifdef FEAT_AUTOCMD
+  	if (win_valid(win))
+  	    win->w_closing = FALSE;
+*** ../vim-7.3.641/src/version.c	2012-08-29 15:22:14.000000000 +0200
+--- src/version.c	2012-08-29 15:49:52.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     642,
+  /**/
+
+-- 
+The psychic said, "God bless you."  I said, "I didn't sneeze."  She
+looked deep into my eyes and said, "You will, eventually."  And, damn
+if she wasn't right.  Two days later, I sneezed.  --Ellen Degeneres
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.643 b/source/ap/vim/patches/7.3.643
new file mode 100644
index 00000000..c2f700c5
--- /dev/null
+++ b/source/ap/vim/patches/7.3.643
@@ -0,0 +1,73 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.643
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.643 (after 7.3.635)
+Problem:    MS-Windows: When starting gvim maximized 'lines' and 'columns' are
+	    wrong. (Christian Robinson)
+Solution:   Move the check for gui.starting from ui_get_shellsize() to
+	    check_shellsize().
+Files:	    src/ui.c, src/term.c
+
+
+*** ../vim-7.3.642/src/ui.c	2012-08-23 13:28:50.000000000 +0200
+--- src/ui.c	2012-08-29 16:20:04.000000000 +0200
+***************
+*** 298,306 ****
+      int	    retval;
+  
+  #ifdef FEAT_GUI
+-     if (gui.starting)
+- 	/* possibly a system call during startup, check later */
+- 	return OK;
+      if (gui.in_use)
+  	retval = gui_get_shellsize();
+      else
+--- 298,303 ----
+*** ../vim-7.3.642/src/term.c	2012-08-15 16:20:59.000000000 +0200
+--- src/term.c	2012-08-29 16:22:25.000000000 +0200
+***************
+*** 3006,3012 ****
+      int		old_Rows = Rows;
+      int		old_Columns = Columns;
+  
+!     if (!exiting)
+      {
+  	(void)ui_get_shellsize();
+  	check_shellsize();
+--- 3006,3018 ----
+      int		old_Rows = Rows;
+      int		old_Columns = Columns;
+  
+!     if (!exiting
+! #ifdef FEAT_GUI
+! 	    /* Do not get the size when executing a shell command during
+! 	     * startup. */
+! 	    && !gui.starting
+! #endif
+! 	    )
+      {
+  	(void)ui_get_shellsize();
+  	check_shellsize();
+*** ../vim-7.3.642/src/version.c	2012-08-29 15:50:22.000000000 +0200
+--- src/version.c	2012-08-29 16:25:42.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     643,
+  /**/
+
+-- 
+Eight Megabytes And Continually Swapping.
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.644 b/source/ap/vim/patches/7.3.644
new file mode 100644
index 00000000..6f2630cc
--- /dev/null
+++ b/source/ap/vim/patches/7.3.644
@@ -0,0 +1,72 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.644
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.644
+Problem:    Dead code for BeOS GUI.
+Solution:   Remove unused __BEOS__ stuff.
+Files:	    src/gui.c
+
+
+*** ../vim-7.3.643/src/gui.c	2012-07-10 16:49:08.000000000 +0200
+--- src/gui.c	2012-08-29 16:28:46.000000000 +0200
+***************
+*** 37,44 ****
+  static void gui_set_bg_color __ARGS((char_u *name));
+  static win_T *xy2win __ARGS((int x, int y));
+  
+! #if defined(UNIX) && !defined(__BEOS__) && !defined(MACOS_X) \
+! 	&& !defined(__APPLE__)
+  # define MAY_FORK
+  static void gui_do_fork __ARGS((void));
+  
+--- 37,43 ----
+  static void gui_set_bg_color __ARGS((char_u *name));
+  static win_T *xy2win __ARGS((int x, int y));
+  
+! #if defined(UNIX) && !defined(MACOS_X) && !defined(__APPLE__)
+  # define MAY_FORK
+  static void gui_do_fork __ARGS((void));
+  
+***************
+*** 784,794 ****
+  gui_exit(rc)
+      int		rc;
+  {
+- #ifndef __BEOS__
+      /* don't free the fonts, it leads to a BUS error
+       * richard@whitequeen.com Jul 99 */
+      free_highlight_fonts();
+- #endif
+      gui.in_use = FALSE;
+      gui_mch_exit(rc);
+  }
+--- 783,791 ----
+*** ../vim-7.3.643/src/version.c	2012-08-29 16:26:01.000000000 +0200
+--- src/version.c	2012-08-29 16:33:30.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     644,
+  /**/
+
+-- 
+E  M  A  C  S
+s  e  l  o  h
+c  t  t  n  i
+a  a     t  f
+p        r  t
+e        o
+         l
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/vim/patches/7.3.645 b/source/ap/vim/patches/7.3.645
new file mode 100644
index 00000000..40d8ee0b
--- /dev/null
+++ b/source/ap/vim/patches/7.3.645
@@ -0,0 +1,118 @@
+To: vim_dev@googlegroups.com
+Subject: Patch 7.3.645
+Fcc: outbox
+From: Bram Moolenaar <Bram@moolenaar.net>
+Mime-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+------------
+
+Patch 7.3.645
+Problem:    No tests for patch 7.3.625 and 7.3.637.
+Solution:   Add more tests for the "gn" command and try/catch. (Christian
+	    Brabandt)
+Files:	    src/testdir/test53.in, src/testdir/test53.ok,
+	    src/testdir/test55.in, src/testdir/test55.ok
+
+
+*** ../vim-7.3.644/src/testdir/test53.in	2012-07-25 15:06:20.000000000 +0200
+--- src/testdir/test53.in	2012-08-29 16:37:44.000000000 +0200
+***************
+*** 34,40 ****
+  gnd
+  /[a]bcdx
+  :1
+! 2gnd
+  :/^start:/,/^end:/wq! test.out
+  ENDTEST
+  
+--- 34,46 ----
+  gnd
+  /[a]bcdx
+  :1
+! 2gnd/join
+! /$
+! 0gnd
+! /\>\zs
+! 0gnd/^
+! gnd$h/\zs
+! gnd
+  :/^start:/,/^end:/wq! test.out
+  ENDTEST
+  
+***************
+*** 57,60 ****
+--- 63,70 ----
+  one
+  two
+  abcdx | abcdx | abcdx
++ join 
++ lines
++ zero width pattern
++ delete first and last chars
+  end:
+*** ../vim-7.3.644/src/testdir/test53.ok	2012-07-25 15:06:20.000000000 +0200
+--- src/testdir/test53.ok	2012-08-29 16:37:48.000000000 +0200
+***************
+*** 21,24 ****
+--- 21,27 ----
+  SEARCH:
+  searchmatch
+  abcdx |  | abcdx
++ join lines
++ zerowidth pattern
++ elete first and last char
+  end:
+*** ../vim-7.3.644/src/testdir/test55.in	2012-05-18 12:06:58.000000000 +0200
+--- src/testdir/test55.in	2012-08-29 16:50:51.000000000 +0200
+***************
+*** 378,383 ****
+--- 378,393 ----
+  :unlet dict
+  :call garbagecollect(1)
+  :"
++ :" test for patch 7.3.637
++ :let a = 'No error caught'
++ :try|foldopen|catch|let a = matchstr(v:exception,'^[^ ]*')|endtry
++ o=a
:"
++ :lang C
++ :redir => a
++ :try|foobar|catch|let a = matchstr(v:exception,'^[^ ]*')|endtry
++ :redir END
++ o=a
:"
++ :"
+  :/^start:/,$wq! test.out
+  ENDTEST
+  
+*** ../vim-7.3.644/src/testdir/test55.ok	2012-05-18 12:06:58.000000000 +0200
+--- src/testdir/test55.ok	2012-08-29 16:51:15.000000000 +0200
+***************
+*** 115,117 ****
+--- 115,123 ----
+  {'a': {'b': 'B'}}
+  Vim(call):E737: a
+  {'a': {'b': 'B'}}
++ Vim(foldopen):E490:
++ 
++ 
++ Error detected while processing :
++ E492: Not an editor command: foobar|catch|let a = matchstr(v:exception,'^[^ ]*')|endtry
++ 
+*** ../vim-7.3.644/src/version.c	2012-08-29 16:34:23.000000000 +0200
+--- src/version.c	2012-08-29 16:37:20.000000000 +0200
+***************
+*** 721,722 ****
+--- 721,724 ----
+  {   /* Add new patch number below this line */
++ /**/
++     645,
+  /**/
+
+-- 
+TALL KNIGHT OF NI: Ni!
+                 "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD
+
+ /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
+///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
+\\\  an exciting new programming language -- http://www.Zimbu.org        ///
+ \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///
diff --git a/source/ap/zsh/zsh.SlackBuild b/source/ap/zsh/zsh.SlackBuild
index dc6dcf2a..7c0a46b3 100755
--- a/source/ap/zsh/zsh.SlackBuild
+++ b/source/ap/zsh/zsh.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=zsh
-VERSION=${VERSION:-$(echo ${PKGNAM}-4.*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo ${PKGNAM}-5.*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -68,9 +68,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# fix regex crash:
-zcat $CWD/zsh.regex.oh.bah.diff.gz | patch -p0 --verbose || exit 1
-
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
diff --git a/source/ap/zsh/zsh.regex.oh.bah.diff b/source/ap/zsh/zsh.regex.oh.bah.diff
deleted file mode 100644
index 15e3d5b4..00000000
--- a/source/ap/zsh/zsh.regex.oh.bah.diff
+++ /dev/null
@@ -1,12 +0,0 @@
---- ./Src/text.c.orig	2010-09-14 09:46:26.000000000 -0500
-+++ ./Src/text.c	2011-03-19 18:50:22.270001467 -0500
-@@ -785,8 +785,7 @@
- 			    taddstr(" ");
- 			    taddstr(ecgetstr(state, EC_NODUP, NULL));
- 			    if (ctype == COND_STREQ ||
--				ctype == COND_STRNEQ ||
--				ctype == COND_REGEX)
-+				ctype == COND_STRNEQ)
- 				state->pc++;
- 			} else {
- 			    /* Unary test: `-f foo' etc. */ 
diff --git a/source/d/automake/automake.SlackBuild b/source/d/automake/automake.SlackBuild
index 55353a40..7f3e3d3c 100755
--- a/source/d/automake/automake.SlackBuild
+++ b/source/d/automake/automake.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=1.11.1
+VERSION=${VERSION:-$(echo automake-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 NUMJOBS=${NUMJOBS:-" -j7 "}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Note: the package is _built_ as 'noarch'
 # Automatically determine architecture for build & packaging:
@@ -44,8 +44,11 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf automake-$VERSION
-tar xvf $CWD/automake-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/automake-$VERSION.tar.xz || exit 1
 cd automake-$VERSION
+
+zcat $CWD/automake.perl516.prototype.diff.gz | patch -p1 || exit 1
+
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/d/automake/automake.perl516.prototype.diff b/source/d/automake/automake.perl516.prototype.diff
new file mode 100644
index 00000000..e88b0993
--- /dev/null
+++ b/source/d/automake/automake.perl516.prototype.diff
@@ -0,0 +1,119 @@
+From 6bf58a59a1f3803e57e3f0378aa9344686707b75 Mon Sep 17 00:00:00 2001
+From: Stefano Lattarini <stefano.lattarini@gmail.com>
+Date: Mon, 28 May 2012 11:32:03 +0000
+Subject: aclocal: declare function prototypes, do not use '&' in function calls
+
+This change will also fix automake bug#11543 (from a report by Matt
+Burgess).
+
+* aclocal.in: Declare prototypes for almost all functions early, before
+any actual function definition (but omit the prototype for the dynamically
+generated '&search' function).  Add prototypes to any function definition.
+Remove '&' from function invocations (i.e., simply use "func(ARGS..)"
+instead of "&func(ARGS...)").
+* THANKS, NEWS: Update.
+
+Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
+---
+diff --git a/aclocal.in b/aclocal.in
+index dfb851b..e8855d5 100644
+--- a/aclocal.in
++++ b/aclocal.in
+@@ -152,8 +152,34 @@ my $erase_me;
+ 
+ ################################################################
+ 
++# Prototypes for all subroutines.
++
++sub unlink_tmp (;$);
++sub xmkdir_p ($);
++sub check_acinclude ();
++sub reset_maps ();
++sub install_file ($$);
++sub list_compare (\@\@);
++sub scan_m4_dirs ($@);
++sub scan_m4_files ();
++sub add_macro ($);
++sub scan_configure_dep ($);
++sub add_file ($);
++sub scan_file ($$$);
++sub strip_redundant_includes (%);
++sub trace_used_macros ();
++sub scan_configure ();
++sub write_aclocal ($@);
++sub usage ($);
++sub version ();
++sub handle_acdir_option ($$);
++sub parse_arguments ();
++sub parse_ACLOCAL_PATH ();
++
++################################################################
++
+ # Erase temporary file ERASE_ME.  Handle signals.
+-sub unlink_tmp
++sub unlink_tmp (;$)
+ {
+   my ($sig) = @_;
+ 
+@@ -350,7 +376,7 @@ sub scan_m4_dirs ($@)
+ 	  next if $file eq 'aclocal.m4';
+ 
+ 	  my $fullfile = File::Spec->canonpath ("$m4dir/$file");
+-	    &scan_file ($type, $fullfile, 'aclocal');
++	  scan_file ($type, $fullfile, 'aclocal');
+ 	}
+       closedir (DIR);
+     }
+@@ -361,12 +387,12 @@ sub scan_m4_files ()
+ {
+   # First, scan configure.ac.  It may contain macro definitions,
+   # or may include other files that define macros.
+-  &scan_file (FT_USER, $configure_ac, 'aclocal');
++  scan_file (FT_USER, $configure_ac, 'aclocal');
+ 
+   # Then, scan acinclude.m4 if it exists.
+   if (-f 'acinclude.m4')
+     {
+-      &scan_file (FT_USER, 'acinclude.m4', 'aclocal');
++      scan_file (FT_USER, 'acinclude.m4', 'aclocal');
+     }
+ 
+   # Finally, scan all files in our search paths.
+@@ -380,7 +406,7 @@ sub scan_m4_files ()
+   my $search = "sub search {\nmy \$found = 0;\n";
+   foreach my $key (reverse sort keys %map)
+     {
+-      $search .= ('if (/\b\Q' . $key . '\E(?!\w)/) { & add_macro ("' . $key
++      $search .= ('if (/\b\Q' . $key . '\E(?!\w)/) { add_macro ("' . $key
+ 		  . '"); $found = 1; }' . "\n");
+     }
+   $search .= "return \$found;\n};\n";
+@@ -403,7 +429,7 @@ sub add_macro ($)
+ 
+   verb "saw macro $macro";
+   $macro_seen{$macro} = 1;
+-  &add_file ($map{$macro});
++  add_file ($map{$macro});
+ }
+ 
+ # scan_configure_dep ($file)
+@@ -465,7 +491,7 @@ sub scan_configure_dep ($)
+     }
+ 
+   add_macro ($_) foreach (@rlist);
+-  &scan_configure_dep ($_) foreach @ilist;
++  scan_configure_dep ($_) foreach @ilist;
+ }
+ 
+ # add_file ($FILE)
+@@ -931,7 +957,7 @@ EOF
+ }
+ 
+ # Print version and exit.
+-sub version()
++sub version ()
+ {
+   print <<EOF;
+ aclocal (GNU $PACKAGE) $VERSION
+--
+cgit v0.9.0.2
diff --git a/source/d/binutils/binutils-2.21.51.0.6.tar.sign b/source/d/binutils/binutils-2.21.51.0.6.tar.sign
deleted file mode 100644
index f5824788..00000000
--- a/source/d/binutils/binutils-2.21.51.0.6.tar.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNNlEFyGugalF9Dw4RAiCTAJ4iU8QPmGnj/bIA+qXwpNK926m3ywCeMEGE
-+3QFy1J7SclHy+sNNX0unSA=
-=OHU3
------END PGP SIGNATURE-----
diff --git a/source/d/binutils/binutils-2.22.52.0.2.tar.sign b/source/d/binutils/binutils-2.22.52.0.2.tar.sign
new file mode 100644
index 00000000..c2bf9930
--- /dev/null
+++ b/source/d/binutils/binutils-2.22.52.0.2.tar.sign
diff --git a/source/d/binutils/binutils.SlackBuild b/source/d/binutils/binutils.SlackBuild
index a5616ea2..02791dc1 100755
--- a/source/d/binutils/binutils.SlackBuild
+++ b/source/d/binutils/binutils.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,18 +20,22 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2011 by Eric Hameleers <alien at slackware.com> for ARM port.
+
 
 PKGNAM=binutils
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -59,14 +63,30 @@ if [ "$ARCH" = "i486" ]; then
   # The config option below is currently needed to compile on x86:
   WERROR="--enable-werror=no"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  # The config option below is currently needed to compile on x86:
+  WERROR="--enable-werror=no"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-binutils
@@ -76,7 +96,8 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf binutils-$VERSION
-tar xvf $CWD/binutils-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/binutils-$VERSION.tar.xz || \
+  tar xvf $CWD/binutils-$VERSION.tar.bz2 || exit 1
 cd binutils-$VERSION
 
 chown -R root:root .
@@ -86,6 +107,11 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# End of preparations
+if echo "$*" | grep -qw -- --prep ; then
+  exit 0
+fi
+
 # Build for an x86 glibc2-based Linux system:
 CFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -99,11 +125,11 @@ CFLAGS="$SLKCFLAGS" \
   --enable-64-bit-bfd \
   --enable-plugins \
   --enable-threads \
-  --enable-targets=$ARCH-slackware-linux \
+  --enable-targets=i386-efi-pe,${TARGET} \
   $GOLD \
   $NO_INITFINI \
   $WERROR \
-  --build=$ARCH-slackware-linux \
+  --build=$TARGET \
   || exit 1
 
 make clean || exit 1
@@ -118,8 +144,8 @@ cp -a include/libiberty.h $PKG/usr/include/libiberty.h
 ( cd $PKG/usr/man/man1 ; mv strings.1 strings-GNU.1 )
 
 # Move ldscripts to /usr/lib${LIBDIRSUFFIX}, and then put symlinks in place
-mv $PKG/usr/${ARCH}-slackware-linux/lib/ldscripts $PKG/usr/lib${LIBDIRSUFFIX}
-( cd $PKG/usr/${ARCH}-slackware-linux
+mv $PKG/usr/${TARGET}/lib/ldscripts $PKG/usr/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/${TARGET}
   ln -s /usr/lib${LIBDIRSUFFIX}/ldscripts lib/ldscripts
   for FILE in ar as ld ld.bfd ld.gold nm objcopy objdump ranlib strip ; do
     if [ -r "/usr/bin/$FILE" ]; then
diff --git a/source/d/binutils/release.binutils-2.21.51.0.6 b/source/d/binutils/release.binutils-2.21.51.0.6
deleted file mode 100644
index 38a38474..00000000
--- a/source/d/binutils/release.binutils-2.21.51.0.6
+++ /dev/null
@@ -1,257 +0,0 @@
-This is the beta release of binutils 2.21.51.0.6 for Linux, which is
-based on binutils 2011 0118 in CVS on sourceware.org plus various
-changes. It is purely for Linux.
-
-All relevant patches in patches have been applied to the source tree.
-You can take a look at patches/README to see what have been applied and
-in what order they have been applied.
-
-Starting from the 2.21.51.0.3 release, you must remove .ctors/.dtors
-section sentinels when building glibc or other C run-time libraries.
-Otherwise, you will run into:
-
-http://sourceware.org/bugzilla/show_bug.cgi?id=12343
-
-Starting from the 2.21.51.0.2 release, BFD linker has the working LTO
-plugin support. It can be used with GCC 4.5 and above. For GCC 4.5, you
-need to configure GCC with --enable-gold to enable LTO plugin support.
-
-Starting from the 2.21.51.0.2 release, binutils fully supports compressed
-debug sections.  However, compressed debug section isn't turned on by
-default in assembler. I am planning to turn it on for x86 assembler in
-the future release, which may lead to the Linux kernel bug messages like
-
-WARNING: lib/ts_kmp.o (.zdebug_aranges): unexpected non-allocatable section.
-
-But the resulting kernel works fine.
-
-Starting from the 2.20.51.0.4 release, no diffs against the previous
-release will be provided.
-
-You can enable both gold and bfd ld with --enable-gold=both.  Gold will
-be installed as ld.gold and bfd ld will be installed as ld.bfd.  By
-default, ld.bfd will be installed as ld.  You can use the configure
-option, --enable-gold=both/gold to choose gold as the default linker,
-ld.  IA-32 binary and X64_64 binary tar balls are configured with
---enable-gold=both/ld --enable-plugins --enable-threads.
-
-Starting from the 2.18.50.0.4 release, the x86 assembler no longer
-accepts
-
-	fnstsw %eax
-
-fnstsw stores 16bit into %ax and the upper 16bit of %eax is unchanged.
-Please use
-
-	fnstsw %ax
-
-Starting from the 2.17.50.0.4 release, the default output section LMA
-(load memory address) has changed for allocatable sections from being
-equal to VMA (virtual memory address), to keeping the difference between
-LMA and VMA the same as the previous output section in the same region.
-
-For
-
-.data.init_task : { *(.data.init_task) }
-
-LMA of .data.init_task section is equal to its VMA with the old linker.
-With the new linker, it depends on the previous output section. You
-can use
-
-.data.init_task : AT (ADDR(.data.init_task)) { *(.data.init_task) }
-
-to ensure that LMA of .data.init_task section is always equal to its
-VMA. The linker script in the older 2.6 x86-64 kernel depends on the
-old behavior.  You can add AT (ADDR(section)) to force LMA of
-.data.init_task section equal to its VMA. It will work with both old
-and new linkers. The x86-64 kernel linker script in kernel 2.6.13 and
-above is OK.
-
-The new x86_64 assembler no longer accepts
-
-	monitor %eax,%ecx,%edx
-
-You should use
-
-	monitor %rax,%ecx,%edx
-
-or
-	monitor
-
-which works with both old and new x86_64 assemblers. They should
-generate the same opcode.
-
-The new i386/x86_64 assemblers no longer accept instructions for moving
-between a segment register and a 32bit memory location, i.e.,
-
-	movl (%eax),%ds
-	movl %ds,(%eax)
-
-To generate instructions for moving between a segment register and a
-16bit memory location without the 16bit operand size prefix, 0x66,
-
-	mov (%eax),%ds
-	mov %ds,(%eax)
-
-should be used. It will work with both new and old assemblers. The
-assembler starting from 2.16.90.0.1 will also support
-
-	movw (%eax),%ds
-	movw %ds,(%eax)
-
-without the 0x66 prefix. Patches for 2.4 and 2.6 Linux kernels are
-available at
-
-http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch
-http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch
-
-The ia64 assembler is now defaulted to tune for Itanium 2 processors.
-To build a kernel for Itanium 1 processors, you will need to add
-
-ifeq ($(CONFIG_ITANIUM),y)
-	CFLAGS += -Wa,-mtune=itanium1
-	AFLAGS += -Wa,-mtune=itanium1
-endif
-
-to arch/ia64/Makefile in your kernel source tree.
-
-Please report any bugs related to binutils 2.21.51.0.6 to
-hjl.tools@gmail.com
-
-and
-
-http://www.sourceware.org/bugzilla/
-
-Changes from binutils 2.21.51.0.5:
-
-1. Update from binutils 2011 0118.
-2. Fix x32 (ILP32) support.  Renamed assembler option to --x32.  It
-can create working static and dynamic x32 executables.
-3. Add BMI and TBM new instruction support.
-4. Fix x86 disassembler to properly display sign-extended byte.
-5. Improve IFUNC linker support.  PRs 12366/12371.
-6. Fix readelf bug on archive. PR 12408.
-7. Fix a assembler when compressing empty debug sections.  PR 12409.
-8. Fix a warning symbol linker bug.  PR 12339.
-9. Fix a duplicated assert message linker bug.  PR 12380.
-10. Fix plugin linker build.  PR 12391.
-11. Fix a plugin linker crash.  PR 12364.
-12. Improve plugin linker.
-13. Improve gold.
-14. Improve arm support.
-15. Improve mips support.
-16. Improve rx support.
-
-Changes from binutils 2.21.51.0.4:
-
-1. Update from binutils 2011 0104.
-2. Add ILP32 support:
-
-http://www.kernel.org/pub/linux/devel/binutils/ilp32/abi.pdf
-
-to Linux/x86-64.
-3. Prevent the Linux x86-64 kernel build failure and remove
-__ld_compatibility support.  PR 12356.
-4. Improve gold.
-5. Improve Windows support.
-6. Improve hppa support.
-7. Improve mips support.
-
-Changes from binutils 2.21.51.0.3:
-
-1. Update from binutils 2010 1217.
-2. Fix the Linux relocatable kernel build.  PR 12327.
-3. Improve mips support.
-
-Changes from binutils 2.21.51.0.2:
-
-1. Update from binutils 2010 1215.
-2. Add BFD linker support for placing input .ctors/.dtors sections in
-output .init_array/.fini_array section.  Add SORT_BY_INIT_PRIORITY.  The
-benefits are
-   a. Avoid output .ctors/.dtors section in executables and shared
-      libraries.
-   b. Allow mixing input .ctors/.dtors sections with input
-   .init_array/.fini_array sectiobs.  GCC PR 46770.
-3. Add BFD linker support for "ld -r" on mixed IR/non-IR objects. Add
-the new ELF section type SHT_GNU_OBJECT_ONLY (0x6ffffff8). See
-
-http://sourceware.org/bugzilla/show_bug.cgi?id=12291
-
-4. Update BFD linker to accept -flto and -flto-partition= for GCC LTO
-option compatibility.
-5. Fix BFD linker to avoid touching uncompressed section content when
-relocating DWARF debug sections for errror reporting.
-6. Mark .gnu.lto_* sections with SHF_EXCLUDE.
-7. Add --target option to ar.
-8. Improve gold.
-9. Improve AIX support.
-10. Improve Windows support.
-11. Improve mips support.
-
-Changes from binutils 2.21.51.0.1:
-
-1. Update from binutils 2010 1206.
-2. Fix BFD and GOLD linker for compressed debug section support.
-3. Fix BFD linker plugin support.  PR ld/12246, ld/12247, ld/12248,
-ld/12277, ld/12288 and ld/12289.
-4. Update BFD linker to group .text.exit, text.startup and .text.hot
-sections.
-5. Fix linker for W_EH_PE_datarel handling.  PR ld/12253.
-6. Fix array access bug in readelf/elfedit.  PR binutils/11742 and
-binutils/12235.
-7. Support dumping GDB .gdb_index section.
-8. Install plugin-api.h.
-9. Improve gold.
-10. Improve Solaris support.
-11. Improve VMS support.
-12. Improve Windows support.
-13. Improve arm support.
-14. Improve bfin support.
-15. Improve mips support.
-16. Improve s390 support.
-17. Improve z80 support.
-
-Changes from binutils 2.20.51.0.12:
-
-1. Update from binutils 2010 1110.
-2. Fix ld plugin support.  PRs lto/46291 and lto/46319.
-3. Fix x86 assembler to properly fold _GLOBAL_OFFSET_TABLE_ in Intel
-syntax.  PR 12186.
-4. Update assembler to ensure that group signature symbols have the name
-of the group.
-5. Avoid unnecessary relaxation in assembler.  PR 12049.
-6. Update linker NOLOAD processing.
-7. Update linker not to include archive members when symbols therein have
-already been defined.  PR 12001.
-8. Change objdump to display compressed section names without 'z'.
-9. Improve gold.
-10. Improve Solaris support.
-11. Improve VMS support.
-12. Improve Windows support.
-13. Improve arm support.
-14. Improve cr16 support.
-15. Improve mips support.
-16. Improve ppc support.
-17. Improve tic6x support.
-
-The file list:
-
-1. binutils-2.21.51.0.6.tar.bz2. Source code.
-2. binutils-2.21.51.0.6.i686.tar.bz2. IA-32 binary tar ball for RedHat
-   EL 5.
-3. binutils-2.21.51.0.6.ia64.tar.bz2. IA-64 binary tar ball for RedHat
-   EL 5.
-4. binutils-2.21.51.0.6.x86_64.tar.bz2. X64_64 binary tar ball for RedHat
-   EL 5.
-
-The primary sites for the beta Linux binutils are:
-
-1. http://www.kernel.org/pub/linux/devel/binutils/
-
-Thanks.
-
-
-H.J. Lu
-hjl.tools@gmail.com
-01/18/2011
diff --git a/source/d/binutils/release.binutils-2.22.52.0.2 b/source/d/binutils/release.binutils-2.22.52.0.2
new file mode 100644
index 00000000..a02ee03e
--- /dev/null
+++ b/source/d/binutils/release.binutils-2.22.52.0.2
@@ -0,0 +1,508 @@
+This is the beta release of binutils 2.22.52.0.2 for Linux, which is
+based on binutils 2012 0424 in CVS on sourceware.org plus various
+changes. It is purely for Linux.
+
+All relevant patches in patches have been applied to the source tree.
+You can take a look at patches/README to see what have been applied and
+in what order they have been applied.
+
+Starting from the 2.21.51.0.3 release, you must remove .ctors/.dtors
+section sentinels when building glibc or other C run-time libraries.
+Otherwise, you will run into:
+
+http://sourceware.org/bugzilla/show_bug.cgi?id=12343
+
+Starting from the 2.21.51.0.2 release, BFD linker has the working LTO
+plugin support. It can be used with GCC 4.5 and above. For GCC 4.5, you
+need to configure GCC with --enable-gold to enable LTO plugin support.
+
+Starting from the 2.21.51.0.2 release, binutils fully supports compressed
+debug sections.  However, compressed debug section isn't turned on by
+default in assembler. I am planning to turn it on for x86 assembler in
+the future release, which may lead to the Linux kernel bug messages like
+
+WARNING: lib/ts_kmp.o (.zdebug_aranges): unexpected non-allocatable section.
+
+But the resulting kernel works fine.
+
+Starting from the 2.20.51.0.4 release, no diffs against the previous
+release will be provided.
+
+You can enable both gold and bfd ld with --enable-gold=both.  Gold will
+be installed as ld.gold and bfd ld will be installed as ld.bfd.  By
+default, ld.bfd will be installed as ld.  You can use the configure
+option, --enable-gold=both/gold to choose gold as the default linker,
+ld.  IA-32 binary and X64_64 binary tar balls are configured with
+--enable-gold=both/ld --enable-plugins --enable-threads.
+
+Starting from the 2.18.50.0.4 release, the x86 assembler no longer
+accepts
+
+	fnstsw %eax
+
+fnstsw stores 16bit into %ax and the upper 16bit of %eax is unchanged.
+Please use
+
+	fnstsw %ax
+
+Starting from the 2.17.50.0.4 release, the default output section LMA
+(load memory address) has changed for allocatable sections from being
+equal to VMA (virtual memory address), to keeping the difference between
+LMA and VMA the same as the previous output section in the same region.
+
+For
+
+.data.init_task : { *(.data.init_task) }
+
+LMA of .data.init_task section is equal to its VMA with the old linker.
+With the new linker, it depends on the previous output section. You
+can use
+
+.data.init_task : AT (ADDR(.data.init_task)) { *(.data.init_task) }
+
+to ensure that LMA of .data.init_task section is always equal to its
+VMA. The linker script in the older 2.6 x86-64 kernel depends on the
+old behavior.  You can add AT (ADDR(section)) to force LMA of
+.data.init_task section equal to its VMA. It will work with both old
+and new linkers. The x86-64 kernel linker script in kernel 2.6.13 and
+above is OK.
+
+The new x86_64 assembler no longer accepts
+
+	monitor %eax,%ecx,%edx
+
+You should use
+
+	monitor %rax,%ecx,%edx
+
+or
+	monitor
+
+which works with both old and new x86_64 assemblers. They should
+generate the same opcode.
+
+The new i386/x86_64 assemblers no longer accept instructions for moving
+between a segment register and a 32bit memory location, i.e.,
+
+	movl (%eax),%ds
+	movl %ds,(%eax)
+
+To generate instructions for moving between a segment register and a
+16bit memory location without the 16bit operand size prefix, 0x66,
+
+	mov (%eax),%ds
+	mov %ds,(%eax)
+
+should be used. It will work with both new and old assemblers. The
+assembler starting from 2.16.90.0.1 will also support
+
+	movw (%eax),%ds
+	movw %ds,(%eax)
+
+without the 0x66 prefix. Patches for 2.4 and 2.6 Linux kernels are
+available at
+
+http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch
+http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch
+
+The ia64 assembler is now defaulted to tune for Itanium 2 processors.
+To build a kernel for Itanium 1 processors, you will need to add
+
+ifeq ($(CONFIG_ITANIUM),y)
+	CFLAGS += -Wa,-mtune=itanium1
+	AFLAGS += -Wa,-mtune=itanium1
+endif
+
+to arch/ia64/Makefile in your kernel source tree.
+
+Please report any bugs related to binutils 2.22.52.0.2 to
+hjl.tools@gmail.com
+
+and
+
+http://www.sourceware.org/bugzilla/
+
+Changes from binutils 2.22.52.0.1:
+
+1. Update from binutils 2012 0424.
+2. Support Intel HLE and RTM extension.
+3. Add NACL support.
+4. Fix -Bsymbolic with protected function pointer.  PR 13880.
+5. Fix an IFUNC regression.  PR 13817.
+6. Fix x86 NOP fill regression.  PR 13675.
+7. Fix a linker regression.  PR 13991. 
+8. Fix dangling global hidden symbol in symtab.  PR 13621.
+9. Fix objcopy, strip and ld for --emit-relocs.  PR 13947.
+10. Improve gold.
+11. Improve mach support.
+12. Improve vms support.
+13. Improve windows support.
+14. Improve arm support.
+15. Improve avr support.
+16. Improve mips support.
+17. Improve ppc support.
+18. Improve rx support.
+19. Improve s390 support.
+20. Improve sh support.
+21. Improve sparc support.
+22. Improve tile support.
+
+Changes from binutils 2.22.51.0.1:
+
+1. Update from binutils 2012 0131.
+2. Add x32 support to gold.
+3. Support linker arch-depedent fill.  PR 13616.
+4. Add i386 NACL support to x86 assembler.
+5. Add fake zero displacement for .d8 and .d32 suffixes to x86 assembler.
+6. Add vmfunc support to x86 assembler/disassembler.
+7. Support >2GB archive member.  PR 13534.
+8. Support R_X86_64_PC32 relocation for PIC on x32.  PR 13581.
+9. Fix LTO linker with --start-group and archive.  PR 12758.
+10. Fix linker with --build-id.  PR 12451.
+11. Improve linker dead code dependency removal on DSO.  PR 12772.
+12. Improve demangler.
+13. Fix elf64-x86-64.c build with GCC 4.7.
+14. Avoid linker -z text crash.  PR 13468.
+15. Avoid readelf crash.  PR 13622.
+16. Avoid nm crash on --size-sort --no-sort.  PR 13593.
+17. Fix linker COFF SECREL32 relocation support.  PR 13491.
+18. Improve gold.
+19. Improve mach support.
+20. Improve arm support.
+21. Improve avr support.
+22. Improve hppa support.
+23. Improve m68k support.
+24. Improve mips support.
+25. Improve ppc support.
+26. Improve rl78 support.
+27. Improve rx support.
+
+Changes from binutils 2.21.53.0.2:
+
+1. Update from binutils 2011 1118.
+2. Fix ar --plugin on archive with mixed IR/non-IR objects.  PR 13298.
+3. Preserve the maximum alignment and size for common symbols.  PR 13250.
+4. Fix LTO linker with -as-needed.  PR 13287.
+5. Fix --plugin support on thin archive.  PR 13257.
+6. Fix LTO linker on thin archive.  PR 13183.
+7. Fix --plugin slim object support on archive.  PR 13278.
+8. Support LDPR_PREVAILING_DEF_IRONLY_EXP in linker plugin.  PR 13229.
+9. Don't make make IR symbols dynamic.  PR 13244.
+10. Fix LTO linker with --as-needed.  PR 13201.
+11. Properly handle 2 IR symbols with the same comdat key.  PR 13066.
+12. Keep .debug_types sections with linker garbage collection.  PR 13233.
+13. Fix -ffunction-sections -Wl,--gc-sections failure with symbol
+versioning.  PR 13195.
+14. Improve linker garbage collection support.  PR 13177.
+15. Remove symbols hidden by version scripts with --gc-sections.  PR 12975.
+16. Remove unnecessary GOT relocation created for IFUNC.  PR 13178.
+17. Move IRELATIVE relocations to the end.  PR 13302.
+18. Avoid readelf core dump.  PR 13219.
+19. Check zero address size when dumping DWARF sections.  PR 13196.
+20. Remove the group section if all members are removed.  PR 13180.
+21. Support R_X86_64_64 and R_X86_64_RELATIVE64 relocations for x32.
+PR 13082.
+22. Add Adapteva Epiphany support.
+23. Add Renesas RL78 support.
+24. Improve gold.
+25. Improve mach-o support.
+26. Improve alpha support.
+27. Improve arm support.
+28. Improve hppa support.
+29. Improve mips support.
+30. Improve ppc support.
+31. Improve rx support.
+32. Improve sparc support.
+
+Changes from binutils 2.21.53.0.1:
+
+1. Update from binutils 2011 0804.
+2. Add Intel K1OM support.
+3. Allow R_X86_64_64 relocation for x32 and check x32 relocation overflow.
+PR ld/13048.
+4. Support direct call in x86-64 assembly code.  PR gas/13046.
+5. Add ia32 Google Native Client support. 
+6. Add .debug_macro section support.
+7. Improve gold.
+8. Improve VMS support.
+9. Improve arm support.
+10. Improve hppa support.
+11. Improve mips support.
+12. Improve mmix support.
+13. Improve ppc support.
+
+Changes from binutils 2.21.52.0.2:
+
+1. Update from binutils 2011 0716.
+2. Fix LTO linker bugs.  PRs 12982/12942.
+3. Fix rorx support in x86 assembler/disassembler for AVX Programming
+Reference (June, 2011).
+4. Fix an x86-64 ELFOSABI linker regression.
+5. Update ELFOSABI_GNU support.  PR 12913.
+6. Fix a linker regression with prelink support.  PR 12921.
+7. Add unwind info to x86 PLT section.  PR 12570.
+8. Support x32 core files.
+9. Support native x32 linker.
+10. Fix linker --gc-sections on note sections.  PR 12851.
+11. Avoid linker crash on bad input.  PR 12887.
+12. Add section flags in linker script.
+13. Improve elf linker -z option support.
+14. Fix nm on compressed debug sections.  PR 12983.
+15. Fix an ar bug.  PR 12558.
+16. Fix an ia64 linker regression.  PR 12978.
+17. Improve gold.
+18. Improve VMS support.
+19. Add TILE-Gx/TILEPro support.
+20. Improve alpha support.
+21. Improve avr support.
+22. Improve mips support.
+23. Improve arm support.
+24. Improve ppc support.
+25. Improve sh support.
+26. Improve TIC6X support.
+
+Changes from binutils 2.21.52.0.1:
+
+1. Update from binutils 2011 0610.
+2. Support AVX Programming Reference (June, 2011)
+3. Allow R_X86_64_64 relocations in SEC_DEBUGGING sections when building
+x32 shared libraries.  Used to build kernel x32 vDSO.
+4. Fix linker --gc-sections on note sections.  PR 12851.
+5. Update readelf to handle binaries containing corrupt version
+information.  PR 12855.
+6. Improve gold.
+7. Improve VMS support.
+8. Improve mips support.
+
+Changes from binutils 2.21.51.0.9:
+
+1. Update from binutils 2011 0608.
+2. Fix an x86 linker regression. PRs 12833/12837/12859.
+3. Fix an x86-64 large model TLS linker bug.  PR 12809.
+4. Fix LTO bugs.  PRs 12758/12760.
+5. Add a new linker switch, -plugin-save-temps.
+6. Fix an linker bug for warning on common symbol in archive.
+7. Fix warning support when building shared library.  PR 12761.
+8. Reduce linker memory usage when linking many small object files.
+PR 12682.
+9. Fix a thin archive bug.  PR 12710.
+10. Fix a TLS linker bug.  PR 12763.
+11. Improve gold.
+12. Improve DWARF dump support.
+13. Improve XCOFF support.
+14. Improve arm support.
+15. Improve cris support.
+16. Improve ia64 ILP32 support.
+17. Improve mips support.
+18. Improve ppc support.
+19. Improve rx support.
+20. Improve s390 support.
+21. Improve tic30 support.
+22. Improve tic6x support.
+23. Improve v850 support.
+
+Changes from binutils 2.21.51.0.8:
+
+1. Update from binutils 2011 0507.
+2. Improve LTO bfd linker.  PRs 12365/12696/12672
+3. Fix a linker regression with constructor attribute in C++.  PR 12730.
+4. Warn relocation in readonly section when creating a shared object.
+5. Remove empty output sections.  PR 12718.
+6. Remove DT_TEXTREL with local IFUNC symbols.  PR 12694.
+7. Properly set ELFOSABI_LINUX for STB_GNU_UNIQUE. PR 10549.
+8. Fix objcopy on unusual input.  PR 12632.
+9. Fix an ar regression.  PR 12720.
+10  Avoid linker crash on bad linker input.
+11. Fix a linker script regression.  PR 12726.
+12. Support new GNU DWARF extensions.
+13. Initial support for SystemTap note sections.
+14. Add --dwarf-start and --dwarf-end to readelf and objdump. 
+15. Disable 3dnow and 3dnowa for bdver1 in x86 assembler.
+16. Improve gold.
+17. Improve VMS support.
+18. Improve arm support.
+19. Improve mips support.
+20. Improve ppc support.
+21. Improve s390 support.
+22. Improve tic6x support.
+
+Changes from binutils 2.21.51.0.7:
+
+1. Update from binutils 2011 0408.
+2. Fix x32 TLS linker bug.
+3. Enable .quad directive in x32 assembler.
+4. Fix an assembler regression.  PRs 12569/12589.
+5. Add --size-check= assembler option to issue a warning, instead of an
+error, on bad ELF .size directive.
+6. Fix an ia32 linker bug with TLS/PIE.  PR 12654.
+7. Fix Intel L1OM linker library search path.
+8. Fix a linker buffer overflow on malformed inputs.  PR 12613.
+9. Check corrupted symtab in nm/readelf.  PR 12639.
+10. Avoid objcopy crash on archive with unknown objects.  PR 12632.
+11. Fix "ar -t".  PR 12590.
+12. Fix many memory leaks.
+13. Improve DWARF support.
+14. Improve gold.
+15. Improve VMS support.
+16. Improve Windows support.
+17. Improve alpha support.
+18. Improve arm support.
+19. Improve avr support.
+20. Improve ppc support.
+21. Improve sparc support.
+22. Improve tic6x support.
+
+Changes from binutils 2.21.51.0.6:
+
+1. Update from binutils 2011 0306.
+2. Supprt x32 TLS IE->LE transition.
+3. Change x32 library directory from /lib32 to /libx32.
+4. Improve LTO linker support.  Fix PRs 12439/12314/12248/12430.
+5. Improve linker plugin support.
+6. Fix an ar bug.  PR 12513.
+7. Properly generate nops for ia32. PR 6957.
+8. Improve readelf DT_GNU_HASH support.  PR 12523.
+9. Improve readelf on invalid input.  PR 12467.
+10. Update ELF assembler to issue an error on invalid  .size directive.
+PR 12519,
+11. Properly handle PT_DYNAMIC segment with zero size sections.  PR 12516.
+12.  Add a new linker option, --verbose=2, to report plugin symbol
+status.
+13. Properly handle entry symbols in linker LTO support.  PR 12507.  
+14. Improve gold.
+15. Improve arm support.
+16. Improve bfin support.
+17. Improve mips support.
+18. Improve ppc support.
+
+Changes from binutils 2.21.51.0.5:
+
+1. Update from binutils 2011 0118.
+2. Fix x32 (ILP32) support.  Renamed assembler option to --x32.  It
+can create working static and dynamic x32 executables.
+3. Add BMI and TBM new instruction support.
+4. Fix x86 disassembler to properly display sign-extended byte.
+5. Improve IFUNC linker support.  PRs 12366/12371.
+6. Fix readelf bug on archive. PR 12408.
+7. Fix a assembler when compressing empty debug sections.  PR 12409.
+8. Fix a warning symbol linker bug.  PR 12339.
+9. Fix a duplicated assert message linker bug.  PR 12380.
+10. Fix plugin linker build.  PR 12391.
+11. Fix a plugin linker crash.  PR 12364.
+12. Improve plugin linker.
+13. Improve gold.
+14. Improve arm support.
+15. Improve mips support.
+16. Improve rx support.
+
+Changes from binutils 2.21.51.0.4:
+
+1. Update from binutils 2011 0104.
+2. Add ILP32 support:
+
+http://www.kernel.org/pub/linux/devel/binutils/ilp32/abi.pdf
+
+to Linux/x86-64.
+3. Prevent the Linux x86-64 kernel build failure and remove
+__ld_compatibility support.  PR 12356.
+4. Improve gold.
+5. Improve Windows support.
+6. Improve hppa support.
+7. Improve mips support.
+
+Changes from binutils 2.21.51.0.3:
+
+1. Update from binutils 2010 1217.
+2. Fix the Linux relocatable kernel build.  PR 12327.
+3. Improve mips support.
+
+Changes from binutils 2.21.51.0.2:
+
+1. Update from binutils 2010 1215.
+2. Add BFD linker support for placing input .ctors/.dtors sections in
+output .init_array/.fini_array section.  Add SORT_BY_INIT_PRIORITY.  The
+benefits are
+   a. Avoid output .ctors/.dtors section in executables and shared
+      libraries.
+   b. Allow mixing input .ctors/.dtors sections with input
+   .init_array/.fini_array sectiobs.  GCC PR 46770.
+3. Add BFD linker support for "ld -r" on mixed IR/non-IR objects. Add
+the new ELF section type SHT_GNU_OBJECT_ONLY (0x6ffffff8). See
+
+http://sourceware.org/bugzilla/show_bug.cgi?id=12291
+
+4. Update BFD linker to accept -flto and -flto-partition= for GCC LTO
+option compatibility.
+5. Fix BFD linker to avoid touching uncompressed section content when
+relocating DWARF debug sections for errror reporting.
+6. Mark .gnu.lto_* sections with SHF_EXCLUDE.
+7. Add --target option to ar.
+8. Improve gold.
+9. Improve AIX support.
+10. Improve Windows support.
+11. Improve mips support.
+
+Changes from binutils 2.21.51.0.1:
+
+1. Update from binutils 2010 1206.
+2. Fix BFD and GOLD linker for compressed debug section support.
+3. Fix BFD linker plugin support.  PR ld/12246, ld/12247, ld/12248,
+ld/12277, ld/12288 and ld/12289.
+4. Update BFD linker to group .text.exit, text.startup and .text.hot
+sections.
+5. Fix linker for W_EH_PE_datarel handling.  PR ld/12253.
+6. Fix array access bug in readelf/elfedit.  PR binutils/11742 and
+binutils/12235.
+7. Support dumping GDB .gdb_index section.
+8. Install plugin-api.h.
+9. Improve gold.
+10. Improve Solaris support.
+11. Improve VMS support.
+12. Improve Windows support.
+13. Improve arm support.
+14. Improve bfin support.
+15. Improve mips support.
+16. Improve s390 support.
+17. Improve z80 support.
+
+Changes from binutils 2.20.51.0.12:
+
+1. Update from binutils 2010 1110.
+2. Fix ld plugin support.  PRs lto/46291 and lto/46319.
+3. Fix x86 assembler to properly fold _GLOBAL_OFFSET_TABLE_ in Intel
+syntax.  PR 12186.
+4. Update assembler to ensure that group signature symbols have the name
+of the group.
+5. Avoid unnecessary relaxation in assembler.  PR 12049.
+6. Update linker NOLOAD processing.
+7. Update linker not to include archive members when symbols therein have
+already been defined.  PR 12001.
+8. Change objdump to display compressed section names without 'z'.
+9. Improve gold.
+10. Improve Solaris support.
+11. Improve VMS support.
+12. Improve Windows support.
+13. Improve arm support.
+14. Improve cr16 support.
+15. Improve mips support.
+16. Improve ppc support.
+17. Improve tic6x support.
+
+The file list:
+
+1. binutils-2.22.52.0.2.tar.bz2. Source code.
+
+The primary sites for the beta Linux binutils are:
+
+1. http://www.kernel.org/pub/linux/devel/binutils/
+
+It is also available on linux/release/2.22.52.0.2 branch at
+
+http://git.kernel.org/?p=linux/kernel/git/hjl/binutils.git;a=summary
+
+Thanks.
+
+
+H.J. Lu
+hjl.tools@gmail.com
+04/25/2012
diff --git a/source/d/bison/bison.SlackBuild b/source/d/bison/bison.SlackBuild
index b4835eed..d9e4b522 100755
--- a/source/d/bison/bison.SlackBuild
+++ b/source/d/bison/bison.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=bison
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j6}
 
@@ -60,7 +60,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf bison-$VERSION
-tar xvf $CWD/bison-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/bison-$VERSION.tar.?z* || exit 1
 cd bison-$VERSION || exit 1
 chown -R root:root .
 find . \
@@ -74,7 +74,9 @@ CFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
-  --infodir=/usr/info
+  --infodir=/usr/info \
+  --docdir=/usr/doc/bison-$VERSION \
+  --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG
@@ -82,10 +84,23 @@ make install DESTDIR=$PKG
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 rm -f $PKG/usr/info/dir
 gzip -9 $PKG/usr/info/*
-gzip -9 $PKG/usr/man/man1/bison.1
-gzip -9 $PKG/usr/man/man1/yacc.1
 
 mkdir -p $PKG/usr/doc/bison-$VERSION
 cp -a \
diff --git a/source/d/cmake/cmake.SlackBuild b/source/d/cmake/cmake.SlackBuild
index e3e1504e..3002e35b 100755
--- a/source/d/cmake/cmake.SlackBuild
+++ b/source/d/cmake/cmake.SlackBuild
@@ -22,7 +22,7 @@
 
 PKGNAM=cmake
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -58,6 +58,8 @@ rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION
 
+zcat $CWD/cmake.findpkgconfig.3ea850.patch.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -67,7 +69,11 @@ find . \
 
 mkdir cmake-build
 cd cmake-build
-../bootstrap
+../bootstrap \
+  --prefix=/usr \
+  --docdir=/doc/$PKGNAM-$VERSION \
+  --qt-gui \
+  --system-libs
 
 # Build
 CFLAGS="$SLKCFLAGS" \
diff --git a/source/d/cmake/cmake.findpkgconfig.3ea850.patch b/source/d/cmake/cmake.findpkgconfig.3ea850.patch
new file mode 100644
index 00000000..a64e47a7
--- /dev/null
+++ b/source/d/cmake/cmake.findpkgconfig.3ea850.patch
@@ -0,0 +1,63 @@
+From 3ea850a5023060b84dcc0e6f0098c32c28b15807 Mon Sep 17 00:00:00 2001
+From: Rolf Eike Beer <eike@sf-mail.de>
+Date: Fri, 13 Apr 2012 08:50:49 +0200
+Subject: [PATCH] FindPkgConfig.cmake: fix documented output variable not set
+ (#13125,#13132)
+
+The real fix is from Yury G. Kudryashov while I added the surrounding cleanups.
+An additional hint to really get this fixed came from Rex Dieter.
+---
+ Modules/FindPkgConfig.cmake                   |    8 ++++++--
+ Tests/CMakeOnly/AllFindModules/CMakeLists.txt |    3 +--
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/Modules/FindPkgConfig.cmake b/Modules/FindPkgConfig.cmake
+index 5d93ab1..39d3a76 100644
+--- a/Modules/FindPkgConfig.cmake
++++ b/Modules/FindPkgConfig.cmake
+@@ -13,11 +13,10 @@
+ # When the 'QUIET' argument is set, no status messages will be printed.
+ #
+ # It sets the following variables:
+-#   PKG_CONFIG_FOUND          ... true if pkg-config works on the system
++#   PKG_CONFIG_FOUND          ... if pkg-config executable was found
+ #   PKG_CONFIG_EXECUTABLE     ... pathname of the pkg-config program
+ #   PKG_CONFIG_VERSION_STRING ... the version of the pkg-config program found
+ #                                 (since CMake 2.8.8)
+-#   PKG_CONFIG_FOUND          ... if pkg-config executable was found
+ #
+ # For the following variables two sets of values exist; first one is the
+ # common one and has the given PREFIX. The second set contains flags
+@@ -104,6 +103,11 @@ find_package_handle_standard_args(PkgConfig
+                                   REQUIRED_VARS PKG_CONFIG_EXECUTABLE
+                                   VERSION_VAR PKG_CONFIG_VERSION_STRING)
+ 
++# This is needed because the module name is "PkgConfig" but the name of
++# this variable has always been PKG_CONFIG_FOUND so this isn't automatically
++# handled by FPHSA.
++set(PKG_CONFIG_FOUND "${PKGCONFIG_FOUND}")
++
+ # Unsets the given variables
+ macro(_pkgconfig_unset var)
+   set(${var} "" CACHE INTERNAL "")
+diff --git a/Tests/CMakeOnly/AllFindModules/CMakeLists.txt b/Tests/CMakeOnly/AllFindModules/CMakeLists.txt
+index 6604208..fc65e58 100644
+--- a/Tests/CMakeOnly/AllFindModules/CMakeLists.txt
++++ b/Tests/CMakeOnly/AllFindModules/CMakeLists.txt
+@@ -71,7 +71,7 @@ endmacro(check_version_string)
+ # reported.
+ 
+ foreach(VTEST ALSA ARMADILLO BZIP2 CUPS CURL EXPAT FREETYPE GETTEXT GIT HSPELL
+-        JASPER LIBXML2 LIBXSLT PERL PostgreSQL TIFF ZLIB)
++        JASPER LIBXML2 LIBXSLT PERL PKG_CONFIG PostgreSQL TIFF ZLIB)
+     check_version_string(${VTEST} ${VTEST}_VERSION_STRING)
+ endforeach(VTEST)
+ 
+@@ -82,4 +82,3 @@ endforeach(VTEST)
+ 
+ check_version_string(PYTHONINTERP PYTHON_VERSION_STRING)
+ check_version_string(SUBVERSION Subversion_VERSION_SVN)
+-check_version_string(PKGCONFIG PKG_CONFIG_VERSION_STRING)
+-- 
+1.7.10
+
diff --git a/source/d/cmake/slack-desc b/source/d/cmake/slack-desc
index 481fdd51..8fb5c8dd 100644
--- a/source/d/cmake/slack-desc
+++ b/source/d/cmake/slack-desc
@@ -9,7 +9,7 @@
 cmake: CMake (cross-platform, open-source make system)
 cmake:
 cmake: CMake is used to control the software process using simple platform
-cmake: and compiler independed configuration files. CMake generates
+cmake: and compiler independent configuration files. CMake generates
 cmake: native makefiles and workspaces that can be used in the
 cmake: compiler environment of your choice.
 cmake:
diff --git a/source/d/doxygen/doxygen.SlackBuild b/source/d/doxygen/doxygen.SlackBuild
index 97db3b10..2a4a0733 100755
--- a/source/d/doxygen/doxygen.SlackBuild
+++ b/source/d/doxygen/doxygen.SlackBuild
@@ -107,6 +107,14 @@ cp -a \
   INSTALL LANGUAGE.HOWTO LICENSE PLATFORMS README* VERSION \
   $PKG/usr/doc/doxygen-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/d/gcc/antlr-runtime-3.4.jar b/source/d/gcc/antlr-runtime-3.4.jar
new file mode 100644
index 00000000..865a537b
--- /dev/null
+++ b/source/d/gcc/antlr-runtime-3.4.jar
diff --git a/source/d/gcc/create_gcj_jvm.sh b/source/d/gcc/create_gcj_jvm.sh
new file mode 100644
index 00000000..d1011860
--- /dev/null
+++ b/source/d/gcc/create_gcj_jvm.sh
@@ -0,0 +1,93 @@
+# ---------------------------------------------------------------------------
+# This script creates a directory structure below /usr/lib/jvm and populates
+# it with symlinks to GCC binaries.
+# This will work as a compatibility layer to emulate an Oracle JDK/JRE.
+# This emulation is required in order to compile OpenJDK using GNU java.
+#
+# The same can automatically be achieved in Slackware's gcc packages if
+# the 'configure' command is called with the following additional parameters:
+#     --enable-java-home \
+#     --with-java-home=/usr/lib$LIBDIRSUFFIX/jvm/jre \
+#     --with-jvm-root-dir=/usr/lib$LIBDIRSUFFIX/jvm \
+#     --with-jvm-jar-dir=/usr/lib$LIBDIRSUFFIX/jvm/jvm-exports \
+#     --with-arch-directory=$LIB_ARCH \
+#
+# Author: Eric Hameleers <alien@slackware.com> December 2011
+# ---------------------------------------------------------------------------
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  LIB_ARCH=amd64
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=$ARCH
+fi
+
+# Where does the OpenJDK SlackBuild expect the GNU java compatibility symlinks:
+JVM=${1:-/usr/lib${LIBDIRSUFFIX}/jvm}
+BINDIR=/usr/bin
+
+# What version of GCC do we have installed:
+GCJVER=$(gcj -dumpversion)
+
+# First, remove the old set of symlinks if they should exist:
+rm -fr $JVM
+
+# Create a JDK compatible directory structure for GNU java:
+mkdir -p $JVM
+mkdir -p $JVM/bin
+mkdir -p $JVM/jre/bin
+mkdir -p $JVM/jre/lib/${LIB_ARCH}/client
+mkdir -p $JVM/jre/lib/${LIB_ARCH}/server
+mkdir -p $JVM/lib
+
+ln -sf $BINDIR/gjar $JVM/bin/jar
+ln -sf $BINDIR/grmic $JVM/bin/rmic
+ln -sf $BINDIR/gjavah $JVM/bin/javah
+ln -sf $BINDIR/jcf-dump $JVM/bin/javap
+ln -sf $BINDIR/gappletviewer $JVM/bin/appletviewer
+ln -sf $BINDIR/grmiregistry $JVM/bin/rmiregistry
+ln -sf $BINDIR/grmiregistry $JVM/jre/bin/rmiregistry
+ln -sf $BINDIR/gkeytool $JVM/bin/keytool
+ln -sf $BINDIR/gkeytool $JVM/jre/bin/keytool
+ln -sf $BINDIR/gij $JVM/bin/java
+ln -sf $BINDIR/ecj $JVM/bin/javac
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjvm.so $JVM/jre/lib/${LIB_ARCH}/client/libjvm.so
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjvm.so $JVM/jre/lib/${LIB_ARCH}/server/libjvm.so
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjawt.so $JVM/jre/lib/${LIB_ARCH}/libjawt.so
+ln -sf /usr/share/java/libgcj-${GCJVER}.jar $JVM/jre/lib/rt.jar
+ln -sf /usr/share/java/libgcj-tools-${GCJVER}.jar $JVM/lib/tools.jar
+ln -sf /usr/include/c++/${GCJVER}/gnu/java $JVM/include
+
+# Add a Eclipse Java Compiler wrapper which is required
+# for bootstrapping OpenJDK using GNU java:
+cat <<EOT > /usr/bin/ecj
+#!/bin/sh
+
+CLASSPATH=/usr/share/java/ecj.jar\${CLASSPATH:+:}\$CLASSPATH \
+  java org.eclipse.jdt.internal.compiler.batch.Main "\$@"
+
+EOT
+chmod 755 /usr/bin/ecj
+
+
diff --git a/source/d/gcc/ecj.sh b/source/d/gcc/ecj.sh
new file mode 100644
index 00000000..1d8b7979
--- /dev/null
+++ b/source/d/gcc/ecj.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+CLASSPATH=@JAVADIR@/ecj.jar${CLASSPATH:+:}$CLASSPATH \
+  java org.eclipse.jdt.internal.compiler.batch.Main "$@"
+
diff --git a/source/d/gcc/gcc-4.7.1.adalib.pic.diff b/source/d/gcc/gcc-4.7.1.adalib.pic.diff
new file mode 100644
index 00000000..792ec654
--- /dev/null
+++ b/source/d/gcc/gcc-4.7.1.adalib.pic.diff
@@ -0,0 +1,40 @@
+From 176ff0f9a1016553978d6cf41770703e2ad90958 Mon Sep 17 00:00:00 2001
+From: jakub <jakub@138bc75d-0d04-0410-961f-82ee72b054a4>
+Date: Thu, 14 Jun 2012 17:45:53 +0000
+Subject: [PATCH 1/1] 	* gcc-interface/Makefile.in (gnatlib-shared-default): Append
+ 	$(PICFLAG_FOR_TARGET) to GNATLIBCFLAGS_FOR_C passed to submake.
+
+git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/branches/gcc-4_7-branch@188623 138bc75d-0d04-0410-961f-82ee72b054a4
+---
+ gcc/ada/ChangeLog                 |    5 +++++
+ gcc/ada/gcc-interface/Makefile.in |    2 +-
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/gcc/ada/ChangeLog b/gcc/ada/ChangeLog
+index 7e3195a..072a3f2 100644
+--- a/gcc/ada/ChangeLog
++++ b/gcc/ada/ChangeLog
+@@ -1,3 +1,8 @@
++2012-06-14  Jakub Jelinek  <jakub@redhat.com>
++
++	* gcc-interface/Makefile.in (gnatlib-shared-default): Append
++	$(PICFLAG_FOR_TARGET) to GNATLIBCFLAGS_FOR_C passed to submake.
++
+ 2012-06-14  Release Manager
+ 
+ 	* GCC 4.7.1 released.
+diff --git a/gcc/ada/gcc-interface/Makefile.in b/gcc/ada/gcc-interface/Makefile.in
+index ee8db38..f9e7eda 100644
+--- a/gcc/ada/gcc-interface/Makefile.in
++++ b/gcc/ada/gcc-interface/Makefile.in
+@@ -2597,7 +2597,7 @@ gnatlib-shared-default:
+ 	$(MAKE) $(FLAGS_TO_PASS) \
+              GNATLIBFLAGS="$(GNATLIBFLAGS)" \
+ 	     GNATLIBCFLAGS="$(GNATLIBCFLAGS) $(PICFLAG_FOR_TARGET)" \
+-	     GNATLIBCFLAGS_FOR_C="$(GNATLIBCFLAGS_FOR_C)" \
++	     GNATLIBCFLAGS_FOR_C="$(GNATLIBCFLAGS_FOR_C) $(PICFLAG_FOR_TARGET)" \
+ 	     MULTISUBDIR="$(MULTISUBDIR)" \
+ 	     THREAD_KIND="$(THREAD_KIND)" \
+              gnatlib
+-- 
+1.7.3.4
diff --git a/source/d/gcc/gcc.SlackBuild b/source/d/gcc/gcc.SlackBuild
index 8288a2a4..df5f99d5 100755
--- a/source/d/gcc/gcc.SlackBuild
+++ b/source/d/gcc/gcc.SlackBuild
@@ -2,7 +2,7 @@
 # GCC package build script (written by volkerdi@slackware.com)
 #
 # Copyright 2003, 2004  Slackware Linux, Inc., Concord, California, USA
-# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,6 +23,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
 
+# Modified 2011 by Eric Hameleers <alien at slackware.com> for OpenJDK.
+
 # Some notes, Fri May 16 12:31:32 PDT 2003:
 #
 # Why i486 and not i386?  Because the shared C++ libraries in gcc-3.2.x will
@@ -44,50 +46,65 @@
 
 PKGNAM=gcc
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # How many jobs to run in parallel:
 NUMJOBS=" -j 7 "
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
-TARGET=$ARCH-slackware-linux
-
 if [ "$ARCH" = "i386" ]; then
   SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
   LIBDIRSUFFIX=""
+  LIB_ARCH=i386
 elif [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
+  LIB_ARCH=i386
 elif [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+  LIB_ARCH=i386
 elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686"
   LIBDIRSUFFIX=""
+  LIB_ARCH=i386
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
+  LIB_ARCH=s390
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+  LIB_ARCH=amd64
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=armv7hl
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
+  LIB_ARCH=$ARCH
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 # Temporary build location.  This should *NOT* be a directory
 # path a non-root user could create later...
-TMP=/gcc-$(mcookie)
+TMP=${TMP:-"/gcc-$(mcookie)"}
 
 # This is the main DESTDIR target:
 PKG1=$TMP/package-gcc
@@ -98,15 +115,16 @@ PKG4=$TMP/package-gcc-gnat
 PKG5=$TMP/package-gcc-java
 PKG6=$TMP/package-gcc-objc
 PKG7=$TMP/package-gcc-g++-gch
+PKG8=$TMP/package-gcc-go
 
 # Clear the build locations:
 if [ -d $TMP ]; then
   rm -rf $TMP
 fi
-mkdir -p $PKG{1,2,3,4,5,6,7}/usr/doc/gcc-$VERSION
+mkdir -p $PKG{1,2,3,4,5,6,7,8}/usr/doc/gcc-$VERSION
 
 # Insert package descriptions:
-mkdir -p $PKG{1,2,3,4,5,6,7}/install
+mkdir -p $PKG{1,2,3,4,5,6,7,8}/install
 cat $CWD/slack-desc.gcc > $PKG1/install/slack-desc
 cat $CWD/slack-desc.gcc-g++ > $PKG2/install/slack-desc
 cat $CWD/slack-desc.gcc-gfortran > $PKG3/install/slack-desc
@@ -114,6 +132,7 @@ cat $CWD/slack-desc.gcc-gnat > $PKG4/install/slack-desc
 cat $CWD/slack-desc.gcc-java > $PKG5/install/slack-desc
 cat $CWD/slack-desc.gcc-objc > $PKG6/install/slack-desc
 # cat $CWD/slack-desc.gcc-g++-gch > $PKG7/install/slack-desc
+cat $CWD/slack-desc.gcc-go > $PKG8/install/slack-desc
 
 cd $TMP
 tar xvf $CWD/gcc-$VERSION.tar.?z*
@@ -122,6 +141,16 @@ tar xvf $CWD/gcc-$VERSION.tar.?z*
 # This can be retrieved from ftp://sourceware.org/pub/java
 cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
 
+# Use an antlr runtime to compile javadoc.
+# The runtime can be obtained from:
+#https://oss.sonatype.org/content/repositories/releases/org/antlr/antlr-runtime/
+ANTLJAR=$(echo $CWD/antlr-*.jar | tail -1)
+
+# Upstream -fPIC fix for gnat build:
+cd gcc-$VERSION
+  zcat $CWD/gcc-4.7.1.adalib.pic.diff.gz | patch -p1 --verbose || exit 1
+cd ..
+
 # install docs
 ( cd gcc-$VERSION
   # Smite the fixincludes:
@@ -134,9 +163,8 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
   find . -perm 664 -exec chmod 644 {} \;
   mkdir -p $PKG1/usr/doc/gcc-$VERSION
   cp -a \
-    BUGS COPYING* \
-    ChangeLog.tree-ssa FAQ INSTALL \
-    LAST_UPDATED MAINTAINERS \
+    COPYING* ChangeLog* FAQ INSTALL \
+    LAST_UPDATED MAINTAINERS NEWS \
     README* *.html \
   $PKG1/usr/doc/gcc-$VERSION
 
@@ -198,6 +226,19 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
         touch -r ChangeLog $PKG6/usr/doc/gcc-${VERSION}/gcc/objc/ChangeLog
       fi
     )
+
+    mkdir -p $PKG8/usr/doc/gcc-${VERSION}/gcc/go
+    ( cd go
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG8/usr/doc/gcc-${VERSION}/gcc/go/ChangeLog
+        touch -r ChangeLog $PKG8/usr/doc/gcc-${VERSION}/gcc/go/ChangeLog
+      fi
+      cp -a \
+        README* THREADS* \
+        gofrontend/{LICENSE,PATENTS,README} \
+      $PKG8/usr/doc/gcc-${VERSION}/gcc/go
+    )
+
   ) || exit 1
 
   mkdir -p $PKG3/usr/doc/gcc-${VERSION}/libgfortran
@@ -278,6 +319,7 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
       touch -r ChangeLog $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3/ChangeLog
     fi
   )
+
 )
 
 # Add fastjar to the gcc-java package:
@@ -305,7 +347,7 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
      --libdir=/usr/lib$LIBDIRSUFFIX \
      --mandir=/usr/man \
      --infodir=/usr/info \
-     --build=$ARCH-slackware-linux
+     --build=$TARGET
   make $NUMJOBS || exit 1
   make install DESTDIR=$PKG5 || exit 1
   mkdir -p $PKG5/usr/doc/fastjar-$FASTJARVER
@@ -372,17 +414,26 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
      --infodir=/usr/info \
      --enable-shared \
      --enable-bootstrap \
-     --enable-languages=ada,c,c++,fortran,java,objc,lto \
+     --enable-languages=ada,c,c++,fortran,go,java,lto,objc \
      --enable-threads=posix \
      --enable-checking=release \
+     --enable-objc-gc \
      --with-system-zlib \
-     --with-python-dir=/lib$LIBDIRSUFFIX/python2.6/site-packages \
+     --with-python-dir=/lib$LIBDIRSUFFIX/python2.7/site-packages \
      --disable-libunwind-exceptions \
      --enable-__cxa_atexit \
      --enable-libssp \
      --enable-lto \
      --with-gnu-ld \
      --verbose \
+     --enable-java-home \
+     --with-java-home=/usr/lib$LIBDIRSUFFIX/jvm/jre \
+     --with-jvm-root-dir=/usr/lib$LIBDIRSUFFIX/jvm \
+     --with-jvm-jar-dir=/usr/lib$LIBDIRSUFFIX/jvm/jvm-exports \
+     --with-arch-directory=$LIB_ARCH \
+     --with-antlr-jar=$ANTLJAR \
+     --enable-java-awt=gtk \
+     --disable-gtktest \
      $GCC_ARCHOPTS \
      --target=${TARGET} \
      --build=${TARGET} \
@@ -418,14 +469,14 @@ cp $CWD/ecj-4.5.jar gcc-$VERSION/ecj.jar
 rm -f $PKG1/usr/lib${LIBDIRSUFFIX}/*gdb.py
 
 # Be sure the "specs" file is installed.
-if [ ! -r $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${ARCH}-slackware-linux/${VERSION}/specs ]; then
-  cat stage1-gcc/specs > $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${ARCH}-slackware-linux/${VERSION}/specs
+if [ ! -r $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs ]; then
+  cat stage1-gcc/specs > $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs
 fi
 
 # Make our 64bit gcc look for 32bit gcc binaries in ./32 subdirectory:
 if [ "$ARCH" = "x86_64" ]; then
   sed -i 's#;.\(:../lib !m64 m32;\)$#;32\1#' \
-    $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${ARCH}-slackware-linux/${VERSION}/specs
+    $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs
 fi
 
 #  make ada.install-common DESTDIR=$PKG1
@@ -462,6 +513,9 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
   ln -sf gcc cc
   ln -sf gcc-$VERSION ${TARGET}-gcc
   ln -sf gcc-$VERSION ${TARGET}-gcc-$VERSION
+  ln -sf gcc-ar ${TARGET}-gcc-ar
+  ln -sf gcc-nm ${TARGET}-gcc-nm
+  ln -sf gcc-ranlib ${TARGET}-gcc-ranlib
   ln -sf gcj ${TARGET}-gcj
   ln -sf gcjh ${TARGET}-gcjh
   ln -sf g++-gcc-$VERSION ${TARGET}-c++
@@ -531,6 +585,11 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
 )
 
 # gcc-gnat:
+# First, relocate usr/bin/gnative2ascii to the gcc-java package so it
+# isn't matched and accidentally put in gcc-gnat:
+mkdir -p $PKG5/usr/bin
+mv $PKG1/usr/bin/gnative2ascii $PKG5/usr/bin
+# Now make the gcc-gnat package tree:
 ( cd $PKG4
   mkdir -p usr/bin
   mv $PKG1/usr/bin/gnat* usr/bin
@@ -583,11 +642,11 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
   mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jvmpi.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
   mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/libffi usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
   # aot-compile Python plugins:
-  if [ ! -d $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 ]; then
-    echo "NO $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 !"
+  if [ ! -d $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 ]; then
+    echo "NO $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 !"
     exit 1
   fi
-  mv $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 usr/lib${LIBDIRSUFFIX}
   mkdir -p usr/info
   mv $PKG1/usr/info/gcj.* usr/info
   # mv $PKG1/usr/info/fastjar.* usr/info
@@ -633,8 +692,24 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
   mv $PKG1/usr/man/man1/jv-convert.1.gz usr/man/man1
   mv $PKG1/usr/man/man1/jv-scan.1.gz usr/man/man1
   mv $PKG1/usr/man/man1/rebuild-gcj-db.1.gz usr/man/man1
+  mkdir -p usr/man/man3
+  mv $PKG1/usr/man/man3/ffi* usr/man/man3
   mkdir -p usr/share
   mv $PKG1/usr/share/java usr/share
+  # The ecj wrapper script:
+  cat $CWD/ecj.sh | sed -e "s,@JAVADIR@,/usr/share/java," > usr/bin/ecj
+  chmod 755 usr/bin/ecj
+  # The JAVA_HOME compatibility links.
+  # Caution: non-multilib arch-independent stuff! No lib64 here.
+  mkdir -p usr/lib$LIBDIRSUFFIX
+  mv $PKG1/usr/lib$LIBDIRSUFFIX/jvm* usr/lib$LIBDIRSUFFIX
+  # And add the missing javac symlink:
+  ln -s ../../../bin/ecj usr/lib$LIBDIRSUFFIX/jvm/bin/javac
+  # Don't package libffi stuff anymore.  GCC will link the internal version
+  # statically, and we'll need a newer one elsewhere.
+  find . -name "ffi*.h" | xargs rm
+  find . -name "libffi*" | xargs rm
+  rm usr/man/man3/ffi*
 )
 
 # gcc-objc:
@@ -655,6 +730,25 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
 #  mv $PKG2/usr/include/c++/$VERSION/$TARGET/bits/stdc++.h.gch usr/include/c++/$VERSION/$TARGET/bits
 #)
 
+# gcc-go:
+( cd $PKG8
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/*gccgo* usr/bin
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/go1 usr/libexec/gcc/$TARGET/$VERSION/go1
+  mkdir -p usr/info
+  mv $PKG1/usr/info/gccgo.info.gz usr/info
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/go usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/{libgo.la,libgo.so.0.*,libgobegin.a} usr/lib${LIBDIRSUFFIX} || exit 1
+  # Ordinarily Slackware doesn't package static libraries, but in this case
+  # it is useful for deploying compiled binaries on machines that do not yet
+  # have libgo.so.0.0.0.
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libgo.a usr/lib${LIBDIRSUFFIX}
+  mkdir -p usr/man/man1
+  mv $PKG1/usr/man/man1/gccgo.1.gz usr/man/man1
+) || exit 1
+
 # Filter all .la files (thanks much to Mark Post for the sed script):
 ( cd $TMP
   for file in $(find . -type f -name "*.la") ; do
@@ -665,7 +759,7 @@ rm -f $PKG1/usr/lib/libiberty.a # catch-all
 )
 
 ## Strip bloated binaries and libraries:
-for dir in $PKG{1,2,3,4,5,6}; do
+for dir in $PKG{1,2,3,4,5,6,8}; do
   ( cd $dir
     find . -name "lib*so*" -exec strip --strip-unneeded "{}" \;
     find . -name "lib*a" -exec strip -g "{}" \;
@@ -689,6 +783,8 @@ done
   makepkg -l y -c n $TMP/gcc-objc-$VERSION-$ARCH-$BUILD.txz )
 #( cd $PKG7
 #  makepkg -l y -c n $TMP/gcc-g++-gch-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG8
+  makepkg -l y -c n $TMP/gcc-go-$VERSION-$ARCH-$BUILD.txz )
 
 echo
 echo "Slackware GCC package build complete!"
diff --git a/source/d/gcc/slack-desc.gcc-gfortran b/source/d/gcc/slack-desc.gcc-gfortran
index ac844f0f..5141cb02 100644
--- a/source/d/gcc/slack-desc.gcc-gfortran
+++ b/source/d/gcc/slack-desc.gcc-gfortran
@@ -8,12 +8,12 @@
             |-----handy-ruler------------------------------------------------------|
 gcc-gfortran: gcc-gfortran (Fortran support for GCC)
 gcc-gfortran:
+gcc-gfortran: The GNU Fortran compiler is fully compliant with the Fortran 95
+gcc-gfortran: Standard and includes legacy F77 support.  In addition, a significant
+gcc-gfortran: number of Fortran 2003 and Fortran 2008 features are implemented.
+gcc-gfortran: GNU Fortran also contains many standard and extensions and can be
+gcc-gfortran: used to run real-world programs.
+gcc-gfortran:
 gcc-gfortran: This package contains those parts of the compiler collection
-gcc-gfortran: needed to compile Fortran code.  The base gcc package is also
-gcc-gfortran: required.  The GNU Fortran compiler is able to compile nearly all
-gcc-gfortran: standard-compliant Fortran 95, Fortran 90, and Fortran 77 programs,
-gcc-gfortran: including a number of standard and non-standard extensions, and can
-gcc-gfortran: be used on real-world programs.  In particular, the supported
-gcc-gfortran: extensions include OpenMP, Cray-style pointers, and several Fortran
-gcc-gfortran: 2003 features such as enumeration, stream I/O, and some of the
-gcc-gfortran: enhancements to allocatable array support from TR 15581.
+gcc-gfortran: needed to compile Fortran code.  The gcc package is also required.
+gcc-gfortran:
diff --git a/source/d/gcc/slack-desc.gcc-go b/source/d/gcc/slack-desc.gcc-go
new file mode 100644
index 00000000..cdd859bc
--- /dev/null
+++ b/source/d/gcc/slack-desc.gcc-go
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gcc-go: gcc-go (Go support for GCC)
+gcc-go:
+gcc-go: Go is a compiled, garbage-collected, concurrent programming language
+gcc-go: developed by Google Inc.  The initial design of Go was started in
+gcc-go: September 2007 by Robert Griesemer, Rob Pike, and Ken Thompson.
+gcc-go: Rob Pike has stated that Go is being used "for real stuff" at Google.
+gcc-go: Go's "gc" compiler targets the Linux, Mac OS X, FreeBSD, OpenBSD and
+gcc-go: Microsoft Windows operating systems, and the i386, amd64, and ARM
+gcc-go: processor architectures.
+gcc-go:
+gcc-go: Homepage:  http://golang.org
diff --git a/source/d/gdb/gdb.SlackBuild b/source/d/gdb/gdb.SlackBuild
index 6e418a4b..a3f3e742 100755
--- a/source/d/gdb/gdb.SlackBuild
+++ b/source/d/gdb/gdb.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=gdb
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -66,7 +66,7 @@ find . \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
   --infodir=/usr/info \
-  --without-python \
+  --with-python \
   --build=$ARCH-slackware-linux
 
 ( cd readline ; make )
diff --git a/source/d/git/git-1.7.4.4.tar.sign b/source/d/git/git-1.7.4.4.tar.sign
deleted file mode 100644
index 5f44bdd4..00000000
--- a/source/d/git/git-1.7.4.4.tar.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNnMpoyGugalF9Dw4RAmY4AJ9IRB87m9225xl29RAHxv2GPl7WpgCdFz47
-lh3KZrjZ5s7H4ZQSDncWQyU=
-=tRV0
------END PGP SIGNATURE-----
diff --git a/source/d/git/git.url b/source/d/git/git.url
new file mode 100644
index 00000000..a88fd582
--- /dev/null
+++ b/source/d/git/git.url
@@ -0,0 +1 @@
+http://git-core.googlecode.com/
diff --git a/source/d/intltool/intltool.SlackBuild b/source/d/intltool/intltool.SlackBuild
index 1588d50f..ef265b32 100755
--- a/source/d/intltool/intltool.SlackBuild
+++ b/source/d/intltool/intltool.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -73,7 +73,6 @@ CFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --infodir=/usr/info \
   --docdir=/usr/doc/${PKGNAM}-$VERSION \
-  --disable-static \
   --build=$ARCH-slackware-linux
 
 # Build and install:
diff --git a/source/d/llvm/llvm.SlackBuild b/source/d/llvm/llvm.SlackBuild
new file mode 100755
index 00000000..47c96695
--- /dev/null
+++ b/source/d/llvm/llvm.SlackBuild
@@ -0,0 +1,173 @@
+#!/bin/sh
+
+# Slackware build script for llvm
+
+# Copyright 2008-2011 Heinz Wiesinger, Amsterdam, The Netherlands
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=llvm
+VERSION=3.0
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CLANG=${CLANG:-yes}
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-${VERSION}.src
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz
+
+if [ "$CLANG" = "no" ]; then
+  cd $PKGNAM-${VERSION}.src
+else
+  cd $PKGNAM-${VERSION}.src/tools
+  rm -rf clang clang-${VERSION}.src
+  tar xvf $CWD/clang-$VERSION.tar.xz
+  mv clang-${VERSION}.src clang
+  cd ../
+
+  # clang fixes for slackware
+  # No longer needed as of llvm/clang 3.0?
+  #patch -p1 -d tools/clang -i $CWD/clang-slackware.diff
+fi
+
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+CINC="/usr/include/"
+GCCDIR=/usr/lib$LIBDIRSUFFIX/gcc/$ARCH-slackware-linux*/*/
+CINC="$CINC:$(echo ${GCCDIR})/include/"
+CINC="$CINC:$(echo ${GCCDIR})/include-fixed/"
+
+# --mandir doesn't work currently
+# need to disable assertions to make llvm thread-safe
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib$LIBDIRSUFFIX \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --enable-optimized \
+  --disable-assertions \
+  --enable-pic \
+  --with-c-include-dirs=$CINC \
+  --build=$ARCH-slackware-linux \
+  --host=$ARCH-slackware-linux || exit 1
+
+# Correct libdir setting
+sed -i "s|\$(PROJ_prefix)/lib|\$(PROJ_prefix)/lib$LIBDIRSUFFIX|" \
+  Makefile.config
+
+if [ "$CLANG" != "no" ]; then
+  sed -i "s|\$(PROJ_prefix)/lib|\$(PROJ_prefix)/lib$LIBDIRSUFFIX|" \
+    tools/clang/lib/Headers/Makefile
+fi
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+if [ "$CLANG" != "no" ]; then
+  # install clang-static-analyzer
+  mkdir -p $PKG/usr/lib$LIBDIRSUFFIX/clang-analyzer
+  cp -pr tools/clang/tools/scan-{build,view} \
+    $PKG/usr/lib$LIBDIRSUFFIX/clang-analyzer/ || exit 1
+  for i in scan-{build,view}; do
+    ln -s /usr/lib$LIBDIRSUFFIX/clang-analyzer/$i/$i \
+      $PKG/usr/bin/$i || exit 1
+  done
+  for i in ccc c++; do
+    ln -s /usr/lib$LIBDIRSUFFIX/clang-analyzer/scan-build/$i-analyzer \
+      $PKG/usr/bin/$i-analyzer || exit 1
+  done
+fi
+
+# Remove example libraries
+rm -f $PKG/usr/lib$LIBDIRSUFFIX/LLVMHello*
+
+# Fix wrong libdir
+sed -i -e "s|ABS_RUN_DIR/lib\"|ABS_RUN_DIR/lib$LIBDIRSUFFIX\"|" \
+  $PKG/usr/bin/llvm-config
+
+# Move man page directory:
+mv $PKG/usr/share/man $PKG/usr/
+# Try to remove /usr/share, which should be empty now.  If it's not, fine.
+rmdir $PKG/usr/share
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a CREDITS* LICENSE* README* $PKG/usr/doc/$PKGNAM-$VERSION
+mv $PKG/usr/docs/llvm/* $PKG/usr/doc/$PKGNAM-$VERSION
+rm -rf $PKG/usr/docs
+
+if [ "$CLANG" != "no" ]; then
+  mkdir $PKG/usr/doc/$PKGNAM-$VERSION/clang
+  cp -a tools/clang/{INSTALL,NOTES,README,TODO}* \
+    $PKG/usr/doc/$PKGNAM-$VERSION/clang
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/d/llvm/llvm.url b/source/d/llvm/llvm.url
new file mode 100644
index 00000000..369fedab
--- /dev/null
+++ b/source/d/llvm/llvm.url
@@ -0,0 +1,2 @@
+http://llvm.org/releases/3.0/llvm-3.0.tar.gz
+http://llvm.org/releases/3.0/clang-3.0.tar.gz
diff --git a/source/d/llvm/slack-desc b/source/d/llvm/slack-desc
new file mode 100644
index 00000000..b466d361
--- /dev/null
+++ b/source/d/llvm/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+llvm: llvm (LLVM compiler toolkit)
+llvm:
+llvm: Low Level Virtual Machine is a toolkit for the construction of highly
+llvm: optimized compilers, optimizers, and runtime environments.
+llvm:
+llvm: This package also includes the clang frontend for the C family of
+llvm: languages:  C, C++, Objective-C, and Objective-C++
+llvm:
+llvm:
+llvm: Homepage: http://llvm.org/
+llvm:
diff --git a/source/d/make/make-3.82-android-build-fix.diff b/source/d/make/make-3.82-android-build-fix.diff
new file mode 100644
index 00000000..8cd3db0d
--- /dev/null
+++ b/source/d/make/make-3.82-android-build-fix.diff
@@ -0,0 +1,16 @@
+--- make-3.82/function.c	2010-07-13 03:20:39.000000000 +0200
++++ make-3.82/function.c	2010-10-27 01:43:27.000000000 +0200
+@@ -1138,12 +1138,12 @@ func_sort (char *o, char **argv, const c
+     {
+       char c = *(t++);
+ 
+-      if (! isspace ((unsigned char)c))
++      if (! isblank ((unsigned char)c))
+         continue;
+ 
+       ++wordi;
+ 
+-      while (isspace ((unsigned char)*t))
++      while (isblank ((unsigned char)*t))
+         ++t;
+     }
diff --git a/source/d/make/make.SlackBuild b/source/d/make/make.SlackBuild
index 97cbd99c..18f701b6 100755
--- a/source/d/make/make.SlackBuild
+++ b/source/d/make/make.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=make
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -70,6 +70,9 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# Fix a problem using make-3.82 to build Android:
+zcat $CWD/make-3.82-android-build-fix.diff.gz | patch -p1 --verbose || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
diff --git a/source/d/oprofile/oprofile.SlackBuild b/source/d/oprofile/oprofile.SlackBuild
index df18feef..8df342e3 100755
--- a/source/d/oprofile/oprofile.SlackBuild
+++ b/source/d/oprofile/oprofile.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo oprofile-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-5}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -64,7 +64,7 @@ rm -rf oprofile-$VERSION
 tar xvf $CWD/oprofile-$VERSION.tar.?z* || exit 1
 cd oprofile-$VERSION
 
-zcat $CWD/oprofile.qt4.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/oprofile.binutils.diff.gz | patch -p1 --verbose || exit 1
 
 ./autogen.sh
 
diff --git a/source/d/oprofile/oprofile.binutils.diff b/source/d/oprofile/oprofile.binutils.diff
new file mode 100644
index 00000000..947ce5d5
--- /dev/null
+++ b/source/d/oprofile/oprofile.binutils.diff
@@ -0,0 +1,44 @@
+diff -u -r --new-file oprofile-0.9.7.orig/libopagent/opagent.c oprofile-0.9.7/libopagent/opagent.c
+--- oprofile-0.9.7.orig/libopagent/opagent.c	2011-07-04 21:25:04.000000000 -0500
++++ oprofile-0.9.7/libopagent/opagent.c	2012-06-20 10:59:17.851896225 -0500
+@@ -60,6 +60,7 @@
+ #include <fcntl.h>
+ #include <unistd.h>
+ #include <time.h>
++#include "config.h"
+ #include <bfd.h>
+ 
+ #include "opagent.h"
+diff -u -r --new-file oprofile-0.9.7.orig/libpp/symbol.h oprofile-0.9.7/libpp/symbol.h
+--- oprofile-0.9.7.orig/libpp/symbol.h	2011-07-04 21:25:04.000000000 -0500
++++ oprofile-0.9.7/libpp/symbol.h	2012-06-20 10:59:23.579895917 -0500
+@@ -18,6 +18,7 @@
+ #include "format_flags.h"
+ #include "op_types.h"
+ 
++#include "config.h"
+ #include <bfd.h>
+ #include <stdint.h>
+ 
+diff -u -r --new-file oprofile-0.9.7.orig/opjitconv/debug_line.c oprofile-0.9.7/opjitconv/debug_line.c
+--- oprofile-0.9.7.orig/opjitconv/debug_line.c	2011-07-04 21:25:04.000000000 -0500
++++ oprofile-0.9.7/opjitconv/debug_line.c	2012-06-20 10:59:40.620895008 -0500
+@@ -13,6 +13,7 @@
+ #include <string.h>
+ #include <stddef.h>
+ #include <stdio.h>
++#include "config.h"
+ #include <bfd.h>
+ #include <limits.h>
+ 
+diff -u -r --new-file oprofile-0.9.7.orig/opjitconv/opjitconv.h oprofile-0.9.7/opjitconv/opjitconv.h
+--- oprofile-0.9.7.orig/opjitconv/opjitconv.h	2011-07-04 21:25:04.000000000 -0500
++++ oprofile-0.9.7/opjitconv/opjitconv.h	2012-06-20 10:59:35.387895285 -0500
+@@ -26,6 +26,7 @@
+ #define OP_JIT_CONV_ALREADY_DONE 5
+ #define OP_JIT_CONV_TMPDIR_NOT_REMOVED 6
+ 
++#include "config.h"
+ #include <bfd.h>
+ #include <stddef.h>
+ #include <sys/stat.h>
diff --git a/source/d/oprofile/oprofile.qt4.diff b/source/d/oprofile/oprofile.qt4.diff
deleted file mode 100644
index e5506a82..00000000
--- a/source/d/oprofile/oprofile.qt4.diff
+++ /dev/null
@@ -1,3194 +0,0 @@
-commit 4513fe62e4517057374091092073e0940584ebe2
-Author: Tobias Doerffel <tobias.doerffel@gmail.com>
-Date:   Mon Jun 29 12:05:49 2009 +0200
-
-    Port GUI to Qt4
-
-diff --git a/configure.in b/configure.in
-index 6f684a0..883a7ad 100644
---- a/configure.in
-+++ b/configure.in
-@@ -131,7 +131,7 @@ ORIG_X_SAVE_LIBS="$LIBS"
- LIBS="$X_PRE_LIBS $LIBS $X_LIBS -lX11 $X_EXTRA_LIBS"
- X_LIBS="$LIBS"
- AC_SUBST(X_LIBS)
--QT_DO_IT_ALL
-+QT4_DO_IT_ALL
- LIBS="$ORIG_X_SAVE_LIBS"
- 
- dnl enable pch for c++
-@@ -155,7 +155,7 @@ AC_SUBST(POPT_LIBS)
- 
- # do NOT put tests here, they will fail in the case X is not installed !
-  
--AM_CONDITIONAL(have_qt, test -n "$QT_LIB")
-+AM_CONDITIONAL(have_qt, test -n "$QT4_LIB")
- 
- AX_CFLAGS_OPTION(OP_CFLAGS,[-W])
- AX_CXXFLAGS_OPTION(OP_CXXFLAGS,[-W])
-@@ -258,7 +258,6 @@ AC_OUTPUT(Makefile \
- 	opjitconv/Makefile \
- 	pp/Makefile \
- 	gui/Makefile \
--	gui/ui/Makefile \
- 	module/Makefile \
- 	module/x86/Makefile \
- 	module/ia64/Makefile \
-@@ -268,8 +267,8 @@ AC_OUTPUT(Makefile \
- 
- AX_COPY_IF_CHANGE(doc/xsl/catalog-1.xml, doc/xsl/catalog.xml)
- 
--if test -z "$QT_LIB"; then
--	echo "Warning: a working Qt not found; no GUI will be built"
-+if test -z "$QT4_LIB"; then
-+	echo "Warning: a working Qt4 not found; no GUI will be built"
- fi
- 
- if test "`getent passwd oprofile 2>/dev/null`" == "" || \
-diff --git a/gui/Makefile.am b/gui/Makefile.am
-index ba5e27c..69e01dd 100644
---- a/gui/Makefile.am
-+++ b/gui/Makefile.am
-@@ -1,5 +1,3 @@
--SUBDIRS = ui
--
- dist_sources = \
- 	oprof_start.cpp \
- 	oprof_start_config.cpp \
-@@ -14,7 +12,7 @@ EXTRA_DIST = $(dist_sources)
- if have_qt
- 
- AM_CPPFLAGS = \
--	@QT_INCLUDES@ \
-+	@QT4_INCLUDES@ \
- 	-I ${top_srcdir}/libop \
- 	-I ${top_srcdir}/libutil++ \
- 	-I ${top_srcdir}/libutil
-@@ -25,19 +23,22 @@ bin_PROGRAMS = oprof_start
- 
- oprof_start_SOURCES = $(dist_sources)
- nodist_oprof_start_SOURCES = oprof_start.moc.cpp
-+BUILT_SOURCES = ui_oprof_start.base.h
- oprof_start_LDADD = \
- 	../libutil++/libutil++.a \
- 	../libop/libop.a \
- 	../libutil/libutil.a \
--	ui/liboprof_start.a \
--	@QT_LDFLAGS@ \
--	@QT_LIB@ \
-+	@QT4_LDFLAGS@ \
-+	@QT4_LIB@ -lQt3Support \
- 	@X_LIBS@
- 
- oprof_start.moc.cpp: ${top_srcdir}/gui/oprof_start.h
--	$(MOC) -o $@ ${top_srcdir}/gui/oprof_start.h
-+	$(MOC4) -o $@ ${top_srcdir}/gui/oprof_start.h
-+
-+ui_oprof_start.base.h: ${top_srcdir}/gui/ui/oprof_start.base.ui
-+	$(UIC4) -o $@ $<
- 
- clean-local:
--	rm -f oprof_start.moc.cpp
-+	rm -f oprof_start.moc.cpp ui_oprof_start.base.h
- 
- endif
-diff --git a/gui/oprof_start.cpp b/gui/oprof_start.cpp
-index 0387136..615c8d7 100644
---- a/gui/oprof_start.cpp
-+++ b/gui/oprof_start.cpp
-@@ -23,7 +23,6 @@
- #include <qlineedit.h>
- #include <qlistview.h>
- #include <qcombobox.h>
--#include <qlistbox.h>
- #include <qfiledialog.h>
- #include <qbuttongroup.h>
- #include <qcheckbox.h>
-@@ -32,7 +31,8 @@
- #include <qvalidator.h>
- #include <qlabel.h>
- #include <qpushbutton.h>
--#include <qheader.h>
-+#include <Qt3Support/Q3ListBox>
-+#include <Qt3Support/Q3Header>
- 
- #include "config.h"
- #include "oprof_start.h"
-@@ -106,12 +106,15 @@ op_event_descr::op_event_descr()
- 
- oprof_start::oprof_start()
- 	:
--	oprof_start_base(0, 0, false, 0),
-+	QDialog(0),
-+	oprof_start_base(),
- 	event_count_validator(new QIntValidator(event_count_edit)),
- 	current_event(0),
- 	cpu_speed(op_cpu_frequency()),
- 	total_nr_interrupts(0)
- {
-+	setupUi( this );
-+
- 	green_pixmap = new QPixmap(green_xpm);
- 	red_pixmap = new QPixmap(red_xpm);
- 	vector<string> args;
-@@ -124,7 +127,7 @@ oprof_start::oprof_start()
- 	op_nr_counters = op_get_nr_counters(cpu_type);
- 
- 	if (cpu_type == CPU_TIMER_INT) {
--		setup_config_tab->removePage(counter_setup_page);
-+		setup_config_tab->removeTab(setup_config_tab->indexOf(counter_setup_page));
- 	} else {
- 		fill_events();
- 	}
-@@ -268,12 +271,12 @@ void oprof_start::fill_events()
- namespace {
- 
- /// find the first item with the given text in column 0 or return NULL
--QListViewItem * findItem(QListView * view, char const * name)
-+Q3ListViewItem * findItem(Q3ListView * view, char const * name)
- {
--	// Qt 2.3.1 does not have QListView::findItem()
--	QListViewItem * item = view->firstChild();
-+	// Qt 2.3.1 does not have Q3ListView::findItem()
-+	Q3ListViewItem * item = view->firstChild();
- 
--	while (item && strcmp(item->text(0).latin1(), name))
-+	while (item && strcmp(item->text(0).toLatin1().constData(), name))
- 		item = item->nextSibling();
- 
- 	return item;
-@@ -292,7 +295,7 @@ void oprof_start::setup_default_event()
- 	event_cfgs[descr.name].user_ring_count = 1;
- 	event_cfgs[descr.name].os_ring_count = 1;
- 
--	QListViewItem * item = findItem(events_list, descr.name);
-+	Q3ListViewItem * item = findItem(events_list, descr.name);
- 	if (item)
- 		item->setSelected(true);
- }
-@@ -349,7 +352,7 @@ void oprof_start::read_set_events()
- 			event_cfgs[ev_name].os_ring_count = 1;
- 		}
- 
--		QListViewItem * item = findItem(events_list, ev_name.c_str());
-+		Q3ListViewItem * item = findItem(events_list, ev_name.c_str());
- 		if (item)
- 			item->setSelected(true);
- 	}
-@@ -436,7 +439,7 @@ void oprof_start::fill_events_listbox()
- 
- 	for (vector<op_event_descr>::reverse_iterator cit = v_events.rbegin();
- 	     cit != v_events.rend(); ++cit) {
--		new QListViewItem(events_list, cit->name.c_str());
-+		new Q3ListViewItem(events_list, cit->name.c_str());
- 	}
- 
- 	setUpdatesEnabled(true);
-@@ -467,7 +470,7 @@ void oprof_start::display_event(op_event_descr const & descr)
- }
- 
- 
--bool oprof_start::is_selectable_event(QListViewItem * item)
-+bool oprof_start::is_selectable_event(Q3ListViewItem * item)
- {
- 	if (item->isSelected())
- 		return true;
-@@ -486,7 +489,7 @@ bool oprof_start::is_selectable_event(QListViewItem * item)
- 
- void oprof_start::draw_event_list()
- {
--	QListViewItem * cur;
-+	Q3ListViewItem * cur;
- 	for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) {
- 		if (is_selectable_event(cur))
- 			cur->setPixmap(0, *green_pixmap);
-@@ -500,9 +503,9 @@ bool oprof_start::alloc_selected_events() const
- {
- 	vector<op_event const *> events;
- 
--	set<QListViewItem *>::const_iterator it;
-+	set<Q3ListViewItem *>::const_iterator it;
- 	for (it = selected_events.begin(); it != selected_events.end(); ++it)
--		events.push_back(find_event_by_name((*it)->text(0).latin1(),0,0));
-+		events.push_back(find_event_by_name((*it)->text(0).toLatin1().constData(),0,0));
- 
- 	size_t * map =
- 		map_event_to_counter(&events[0], events.size(), cpu_type);
-@@ -520,24 +523,24 @@ void oprof_start::event_selected()
- 	// (de)selected item so we record a set of selected items and diff
- 	// it in the appropriate way with the previous list of selected items.
- 
--	set<QListViewItem *> current_selection;
--	QListViewItem * cur;
-+	set<Q3ListViewItem *> current_selection;
-+	Q3ListViewItem * cur;
- 	for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) {
- 		if (cur->isSelected())
- 			current_selection.insert(cur);
- 	}
- 
- 	// First remove the deselected item.
--	vector<QListViewItem *> new_deselected;
-+	vector<Q3ListViewItem *> new_deselected;
- 	set_difference(selected_events.begin(), selected_events.end(),
- 		       current_selection.begin(), current_selection.end(),
- 		       back_inserter(new_deselected));
--	vector<QListViewItem *>::const_iterator it;
-+	vector<Q3ListViewItem *>::const_iterator it;
- 	for (it = new_deselected.begin(); it != new_deselected.end(); ++it)
- 		selected_events.erase(*it);
- 
- 	// Now try to add the newly selected item if enough HW resource exists
--	vector<QListViewItem *> new_selected;
-+	vector<Q3ListViewItem *> new_selected;
- 	set_difference(current_selection.begin(), current_selection.end(),
- 		       selected_events.begin(), selected_events.end(),
- 		       back_inserter(new_selected));
-@@ -554,26 +557,26 @@ void oprof_start::event_selected()
- 	draw_event_list();
- 
- 	if (current_event)
--		display_event(locate_event(current_event->text(0).latin1()));
-+		display_event(locate_event(current_event->text(0).toLatin1().constData()));
- }
- 
- 
--void oprof_start::event_over(QListViewItem * item)
-+void oprof_start::event_over(Q3ListViewItem * item)
- {
--	op_event_descr const & descr = locate_event(item->text(0).latin1());
-+	op_event_descr const & descr = locate_event(item->text(0).toLatin1().constData());
- 
- 	string help_str = descr.help_str.c_str();
- 	if (!is_selectable_event(item)) {
- 		help_str += " conflicts with:";
- 
--		set<QListViewItem *>::const_iterator it;
-+		set<Q3ListViewItem *>::const_iterator it;
- 		for (it = selected_events.begin(); 
- 		     it != selected_events.end(); ) {
--			QListViewItem * temp = *it;
-+			Q3ListViewItem * temp = *it;
- 			selected_events.erase(it++);
- 			if (is_selectable_event(item)) {
- 				help_str += " ";
--				help_str += temp->text(0).latin1();
-+				help_str += temp->text(0).toLatin1().constData();
- 			}
- 			selected_events.insert(temp);
- 		}
-@@ -586,7 +589,7 @@ void oprof_start::event_over(QListViewItem * item)
- /// select the kernel image filename
- void oprof_start::choose_kernel_filename()
- {
--	string name = kernel_filename_edit->text().latin1();
-+	string name = kernel_filename_edit->text().toLatin1().constData();
- 	string result = do_open_file_or_dir(name, false);
- 
- 	if (!result.empty())
-@@ -601,7 +604,7 @@ void oprof_start::record_selected_event_config()
- 	if (!current_event)
- 		return;
- 
--	string name(current_event->text(0).latin1());
-+	string name(current_event->text(0).toLatin1().constData());
- 
- 	event_setting & cfg = event_cfgs[name];
- 	op_event_descr const & curr = locate_event(name);
-@@ -617,7 +620,7 @@ void oprof_start::record_selected_event_config()
- // are not sufficient to do the validation)
- bool oprof_start::record_config()
- {
--	config.kernel_filename = kernel_filename_edit->text().latin1();
-+	config.kernel_filename = kernel_filename_edit->text().toLatin1().constData();
- 	config.no_kernel = no_vmlinux->isChecked();
- 
- 	uint temp = buffer_size_edit->text().toUInt();
-@@ -824,7 +827,7 @@ uint oprof_start::max_perf_count() const
- }
- 
- 
--void oprof_start::on_flush_profiler_data()
-+void oprof_start::flush_profiler_data()
- {
- 	vector<string> args;
- 	args.push_back("--dump");
-@@ -837,14 +840,14 @@ void oprof_start::on_flush_profiler_data()
- 
- 
- // user is happy of its setting.
--void oprof_start::on_start_profiler()
-+void oprof_start::start_profiler()
- {
- 	// save the current settings
- 	record_selected_event_config();
- 
- 	bool one_enable = false;
- 
--	QListViewItem * cur;
-+	Q3ListViewItem * cur;
- 	for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) {
- 		if (!cur->isSelected())
- 			continue;
-@@ -852,9 +855,9 @@ void oprof_start::on_start_profiler()
- 		// the missing reference is intended: gcc 2.91.66 can compile
- 		// "op_event_descr const & descr = ..." w/o a warning
- 		op_event_descr const descr =
--			locate_event(cur->text(0).latin1());
-+			locate_event(cur->text(0).toLatin1().constData());
- 
--		event_setting & cfg = event_cfgs[cur->text(0).latin1()];
-+		event_setting & cfg = event_cfgs[cur->text(0).toLatin1().constData()];
- 
- 		one_enable = true;
- 
-@@ -909,7 +912,7 @@ void oprof_start::on_start_profiler()
- 			return;
- 
- 		// this flush profiler data also.
--		on_stop_profiler();
-+		stop_profiler();
- 	}
- 
- 	vector<string> args;
-@@ -946,15 +949,15 @@ bool oprof_start::save_config()
- 	vector<string> tmpargs;
- 	tmpargs.push_back("--setup");
- 
--	QListViewItem * cur;
-+	Q3ListViewItem * cur;
- 	for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) {
- 		if (!cur->isSelected())
- 			continue;
- 
--		event_setting & cfg = event_cfgs[cur->text(0).latin1()];
-+		event_setting & cfg = event_cfgs[cur->text(0).toLatin1().constData()];
- 
- 		op_event_descr const & descr =
--			locate_event(cur->text(0).latin1());
-+			locate_event(cur->text(0).toLatin1().constData());
- 
- 		one_enabled = true;
- 
-@@ -1016,7 +1019,7 @@ bool oprof_start::save_config()
- 
- 
- // flush and stop the profiler if it was started.
--void oprof_start::on_stop_profiler()
-+void oprof_start::stop_profiler()
- {
- 	vector<string> args;
- 	args.push_back("--shutdown");
-@@ -1030,13 +1033,13 @@ void oprof_start::on_stop_profiler()
- }
- 
- 
--void oprof_start::on_separate_kernel_cb_changed(int state)
-+void oprof_start::separate_kernel_cb_changed(int state)
- {
- 	if (state == 2)
- 		separate_lib_cb->setChecked(true);
- }
- 
--void oprof_start::on_reset_sample_files()
-+void oprof_start::reset_sample_files()
- {
- 	int ret = QMessageBox::warning(this, 0, "Are you sure you want to "
- 	       "reset your last profile session ?", "Yes", "No", 0, 0, 1);
-diff --git a/gui/oprof_start.h b/gui/oprof_start.h
-index c2910ee..a2c5eb5 100644
---- a/gui/oprof_start.h
-+++ b/gui/oprof_start.h
-@@ -16,13 +16,16 @@
- #include <map>
- #include <set>
- 
--#include "ui/oprof_start.base.h"
-+#include <QtGui/QDialog>
-+class QColorGroup;
-+
-+#include "ui_oprof_start.base.h"
- #include "oprof_start_config.h"
- 
- #include "op_events.h"
- 
- class QIntValidator;
--class QListViewItem;
-+class Q3ListViewItem;
- class QTimerEvent;
- 
- /// a struct describing a particular event type
-@@ -43,7 +46,7 @@ struct op_event_descr {
- 	uint min_count;
- };
- 
--class oprof_start : public oprof_start_base
-+class oprof_start : public QDialog, public Ui::oprof_start_base
- {
- 	Q_OBJECT
- 
-@@ -54,19 +57,19 @@ protected slots:
- 	/// select the kernel image filename
- 	void choose_kernel_filename();
- 	/// flush profiler
--	void on_flush_profiler_data();
-+	void flush_profiler_data();
- 	/// start profiler
--	void on_start_profiler();
-+	void start_profiler();
- 	/// stop profiler
--	void on_stop_profiler();
-+	void stop_profiler();
- 	/// events selection change
- 	void event_selected();
- 	/// the mouse is over an event
--	void event_over(QListViewItem *);
-+	void event_over(Q3ListViewItem *);
- 	/// state of separate_kernel_cb changed
--	void on_separate_kernel_cb_changed(int);
-+	void separate_kernel_cb_changed(int);
- 	/// reset sample files
--	void on_reset_sample_files();
-+	void reset_sample_files();
- 
- 	/// close the dialog
- 	void accept();
-@@ -121,7 +124,7 @@ private:
- 	void draw_event_list();
- 
- 	/// return true if item is selectable or already selected
--	bool is_selectable_event(QListViewItem * item);
-+	bool is_selectable_event(Q3ListViewItem * item);
- 
- 	/// try to alloc counters for the selected_events
- 	bool alloc_selected_events() const;
-@@ -139,8 +142,8 @@ private:
- 	/// The currently selected events. We must track this because
- 	/// with multiple selection listbox QT doesn't allow to know
- 	/// what is the last selected item. events_selected() update it
--	std::set<QListViewItem *> selected_events;
--	QListViewItem * current_event;
-+	std::set<Q3ListViewItem *> selected_events;
-+	Q3ListViewItem * current_event;
- 
- 	/// current config
- 	config_setting config;
-diff --git a/gui/oprof_start_main.cpp b/gui/oprof_start_main.cpp
-index 44da5de..4930d9a 100644
---- a/gui/oprof_start_main.cpp
-+++ b/gui/oprof_start_main.cpp
-@@ -19,7 +19,7 @@ int main(int argc, char* argv[])
- 
- 	oprof_start* dlg = new oprof_start();
- 
--	a.setMainWidget(dlg);
-+	a.setActiveWindow(dlg);
- 
- 	dlg->show();
- 
-diff --git a/gui/oprof_start_util.cpp b/gui/oprof_start_util.cpp
-index d293431..17359ae 100644
---- a/gui/oprof_start_util.cpp
-+++ b/gui/oprof_start_util.cpp
-@@ -293,17 +293,16 @@ string const do_open_file_or_dir(string const & base_dir, bool dir_only)
- 	QString result;
- 
- 	if (dir_only) {
--		result = QFileDialog::getExistingDirectory(base_dir.c_str(), 0,
--			"open_file_or_dir", "Get directory name", true);
-+		result = QFileDialog::getExistingDirectory(NULL, "Get directory name",
-+			base_dir.c_str(), QFileDialog::ShowDirsOnly);
- 	} else {
--		result = QFileDialog::getOpenFileName(base_dir.c_str(), 0, 0,
--			"open_file_or_dir", "Get filename");
-+		result = QFileDialog::getOpenFileName(NULL, "Get filename", base_dir.c_str());
- 	}
- 
- 	if (result.isNull())
- 		return string();
- 	else
--		return result.latin1();
-+		return result.toLatin1().constData();
- }
- 
- /**
-diff --git a/gui/ui/oprof_start.base.ui b/gui/ui/oprof_start.base.ui
-index 4fcc43f..b882656 100644
---- a/gui/ui/oprof_start.base.ui
-+++ b/gui/ui/oprof_start.base.ui
-@@ -1,1190 +1,1055 @@
--<!DOCTYPE UI><UI>
--<class>oprof_start_base</class>
--<widget>
--    <class>QDialog</class>
--    <property stdset="1">
--        <name>name</name>
--        <cstring>oprof_start_base</cstring>
--    </property>
--    <property stdset="1">
--        <name>geometry</name>
--        <rect>
--            <x>0</x>
--            <y>0</y>
--            <width>625</width>
--            <height>735</height>
--        </rect>
--    </property>
--    <property stdset="1">
--        <name>caption</name>
--        <string>Start profiler</string>
--    </property>
--    <property stdset="1">
--        <name>sizeGripEnabled</name>
--        <bool>true</bool>
--    </property>
--    <vbox>
--        <property stdset="1">
--            <name>margin</name>
--            <number>11</number>
--        </property>
--        <property stdset="1">
--            <name>spacing</name>
--            <number>6</number>
--        </property>
--        <widget>
--            <class>QTabWidget</class>
--            <property stdset="1">
--                <name>name</name>
--                <cstring>setup_config_tab</cstring>
-+<?xml version="1.0" encoding="UTF-8"?>
-+<ui version="4.0">
-+ <class>oprof_start_base</class>
-+ <widget class="QDialog" name="oprof_start_base">
-+  <property name="geometry">
-+   <rect>
-+    <x>0</x>
-+    <y>0</y>
-+    <width>625</width>
-+    <height>735</height>
-+   </rect>
-+  </property>
-+  <property name="windowTitle">
-+   <string>Start profiler</string>
-+  </property>
-+  <property name="sizeGripEnabled">
-+   <bool>true</bool>
-+  </property>
-+  <layout class="QVBoxLayout">
-+   <property name="spacing">
-+    <number>6</number>
-+   </property>
-+   <property name="margin">
-+    <number>11</number>
-+   </property>
-+   <item>
-+    <widget class="QTabWidget" name="setup_config_tab">
-+     <widget class="QWidget" name="counter_setup_page">
-+      <attribute name="title">
-+       <string>&amp;Setup</string>
-+      </attribute>
-+      <layout class="QVBoxLayout">
-+       <property name="spacing">
-+        <number>6</number>
-+       </property>
-+       <property name="margin">
-+        <number>11</number>
-+       </property>
-+       <item>
-+        <widget class="Q3GroupBox" name="counter_group">
-+         <property name="title">
-+          <string>Events</string>
-+         </property>
-+         <layout class="QVBoxLayout">
-+          <property name="spacing">
-+           <number>6</number>
-+          </property>
-+          <property name="margin">
-+           <number>11</number>
-+          </property>
-+          <item>
-+           <layout class="QHBoxLayout">
-+            <property name="spacing">
-+             <number>6</number>
-             </property>
--            <widget>
--                <class>QWidget</class>
--                <property stdset="1">
--                    <name>name</name>
--                    <cstring>counter_setup_page</cstring>
-+            <property name="margin">
-+             <number>0</number>
-+            </property>
-+            <item>
-+             <widget class="Q3ListView" name="events_list">
-+              <property name="minimumSize">
-+               <size>
-+                <width>250</width>
-+                <height>0</height>
-+               </size>
-+              </property>
-+              <property name="toolTip">
-+               <string>Available events</string>
-+              </property>
-+              <property name="selectionMode">
-+               <enum>Q3ListView::Multi</enum>
-+              </property>
-+              <column>
-+               <property name="text">
-+                <string>Removedincode</string>
-+               </property>
-+               <property name="clickable">
-+                <bool>false</bool>
-+               </property>
-+               <property name="resizable">
-+                <bool>true</bool>
-+               </property>
-+              </column>
-+             </widget>
-+            </item>
-+            <item>
-+             <layout class="QVBoxLayout">
-+              <property name="spacing">
-+               <number>6</number>
-+              </property>
-+              <property name="margin">
-+               <number>0</number>
-+              </property>
-+              <item>
-+               <widget class="QCheckBox" name="os_ring_count_cb">
-+                <property name="toolTip">
-+                 <string>Profile kernel code</string>
-                 </property>
--                <attribute>
--                    <name>title</name>
--                    <string>&amp;Setup</string>
--                </attribute>
--                <vbox>
--                    <property stdset="1">
--                        <name>margin</name>
--                        <number>11</number>
--                    </property>
--                    <property stdset="1">
--                        <name>spacing</name>
--                        <number>6</number>
--                    </property>
--                    <widget>
--                        <class>QGroupBox</class>
--                        <property stdset="1">
--                            <name>name</name>
--                            <cstring>counter_group</cstring>
--                        </property>
--                        <property stdset="1">
--                            <name>title</name>
--                            <string>Events</string>
--                        </property>
--                        <vbox>
--                            <property stdset="1">
--                                <name>margin</name>
--                                <number>11</number>
--                            </property>
--                            <property stdset="1">
--                                <name>spacing</name>
--                                <number>6</number>
--                            </property>
--                            <widget>
--                                <class>QLayoutWidget</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>Layout10</cstring>
--                                </property>
--                                <hbox>
--                                    <property stdset="1">
--                                        <name>margin</name>
--                                        <number>0</number>
--                                    </property>
--                                    <property stdset="1">
--                                        <name>spacing</name>
--                                        <number>6</number>
--                                    </property>
--                                    <widget>
--                                        <class>QListView</class>
--                                        <column>
--                                            <property>
--                                                <name>text</name>
--                                                <string>Removedincode</string>
--                                            </property>
--                                            <property>
--                                                <name>clickable</name>
--                                                <bool>false</bool>
--                                            </property>
--                                            <property>
--                                                <name>resizeable</name>
--                                                <bool>true</bool>
--                                            </property>
--                                        </column>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>events_list</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>minimumSize</name>
--                                            <size>
--                                                <width>250</width>
--                                                <height>0</height>
--                                            </size>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>selectionMode</name>
--                                            <enum>Multi</enum>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Available events</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QLayoutWidget</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>Layout9</cstring>
--                                        </property>
--                                        <vbox>
--                                            <property stdset="1">
--                                                <name>margin</name>
--                                                <number>0</number>
--                                            </property>
--                                            <property stdset="1">
--                                                <name>spacing</name>
--                                                <number>6</number>
--                                            </property>
--                                            <widget>
--                                                <class>QCheckBox</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>os_ring_count_cb</cstring>
--                                                </property>
--                                                <property stdset="1">
--                                                    <name>text</name>
--                                                    <string>Profile &amp;kernel</string>
--                                                </property>
--                                                <property>
--                                                    <name>toolTip</name>
--                                                    <string>Profile kernel code</string>
--                                                </property>
--                                            </widget>
--                                            <widget>
--                                                <class>QCheckBox</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>user_ring_count_cb</cstring>
--                                                </property>
--                                                <property stdset="1">
--                                                    <name>text</name>
--                                                    <string>Profile &amp;user binaries</string>
--                                                </property>
--                                                <property>
--                                                    <name>toolTip</name>
--                                                    <string>Profile user libraries and applications</string>
--                                                </property>
--                                            </widget>
--                                            <widget>
--                                                <class>QLayoutWidget</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>Layout16</cstring>
--                                                </property>
--                                                <hbox>
--                                                    <property stdset="1">
--                                                        <name>margin</name>
--                                                        <number>0</number>
--                                                    </property>
--                                                    <property stdset="1">
--                                                        <name>spacing</name>
--                                                        <number>6</number>
--                                                    </property>
--                                                    <widget>
--                                                        <class>QLabel</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>TextLabel1_2</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>C&amp;ount</string>
--                                                        </property>
--                                                        <property>
--                                                            <name>buddy</name>
--                                                            <cstring>event_count_edit</cstring>
--                                                        </property>
--                                                    </widget>
--                                                    <widget>
--                                                        <class>QLineEdit</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>event_count_edit</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>sizePolicy</name>
--                                                            <sizepolicy>
--                                                                <hsizetype>1</hsizetype>
--                                                                <vsizetype>0</vsizetype>
--                                                            </sizepolicy>
--                                                        </property>
--                                                        <property>
--                                                            <name>toolTip</name>
--                                                            <string>Set the count value</string>
--                                                        </property>
--                                                    </widget>
--                                                    <spacer>
--                                                        <property>
--                                                            <name>name</name>
--                                                            <cstring>Spacer13_2</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>orientation</name>
--                                                            <enum>Horizontal</enum>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>sizeType</name>
--                                                            <enum>Expanding</enum>
--                                                        </property>
--                                                        <property>
--                                                            <name>sizeHint</name>
--                                                            <size>
--                                                                <width>20</width>
--                                                                <height>20</height>
--                                                            </size>
--                                                        </property>
--                                                    </spacer>
--                                                </hbox>
--                                            </widget>
--                                            <widget>
--                                                <class>QButtonGroup</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>unit_mask_group</cstring>
--                                                </property>
--                                                <property stdset="1">
--                                                    <name>sizePolicy</name>
--                                                    <sizepolicy>
--                                                        <hsizetype>1</hsizetype>
--                                                        <vsizetype>5</vsizetype>
--                                                    </sizepolicy>
--                                                </property>
--                                                <property stdset="1">
--                                                    <name>title</name>
--                                                    <string>Unit mask</string>
--                                                </property>
--                                                <property>
--                                                    <name>toolTip</name>
--                                                    <string>Unit mask settings for this event</string>
--                                                </property>
--                                                <grid>
--                                                    <property stdset="1">
--                                                        <name>margin</name>
--                                                        <number>11</number>
--                                                    </property>
--                                                    <property stdset="1">
--                                                        <name>spacing</name>
--                                                        <number>6</number>
--                                                    </property>
--                                                    <widget row="0"  column="0" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check0</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check0</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="1"  column="0"  rowspan="2"  colspan="2" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check1</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check1</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="3"  column="0"  rowspan="2"  colspan="2" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check2</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check2</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="5"  column="0" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check3</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check3</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="6"  column="0" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check4</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check4</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="7"  column="0" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check5</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check5</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="8"  column="0"  rowspan="2"  colspan="2" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check6</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check6</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="10"  column="0" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check7</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check7</string>
--                                                        </property>
--                                                    </widget>
--                                                    <spacer row="11"  column="1" >
--                                                        <property>
--                                                            <name>name</name>
--                                                            <cstring>Spacer14</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>orientation</name>
--                                                            <enum>Vertical</enum>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>sizeType</name>
--                                                            <enum>Expanding</enum>
--                                                        </property>
--                                                        <property>
--                                                            <name>sizeHint</name>
--                                                            <size>
--                                                                <width>20</width>
--                                                                <height>20</height>
--                                                            </size>
--                                                        </property>
--                                                    </spacer>
--                                                    <widget row="5"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check11</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check11</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="7"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check13</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check13</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="10"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check15</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check15</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="4"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check10</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check10</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="9"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check14</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check14</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="2"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check9</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check9</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="0"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check8</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check8</string>
--                                                        </property>
--                                                    </widget>
--                                                    <widget row="6"  column="1" >
--                                                        <class>QCheckBox</class>
--                                                        <property stdset="1">
--                                                            <name>name</name>
--                                                            <cstring>check12</cstring>
--                                                        </property>
--                                                        <property stdset="1">
--                                                            <name>text</name>
--                                                            <string>check12</string>
--                                                        </property>
--                                                    </widget>
--                                                </grid>
--                                            </widget>
--                                        </vbox>
--                                    </widget>
--                                </hbox>
--                            </widget>
--                            <widget>
--                                <class>QLabel</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>event_help_label</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>enabled</name>
--                                    <bool>true</bool>
--                                </property>
--                                <property stdset="1">
--                                    <name>sizePolicy</name>
--                                    <sizepolicy>
--                                        <hsizetype>1</hsizetype>
--                                        <vsizetype>1</vsizetype>
--                                    </sizepolicy>
--                                </property>
--                                <property stdset="1">
--                                    <name>frameShape</name>
--                                    <enum>WinPanel</enum>
--                                </property>
--                                <property stdset="1">
--                                    <name>frameShadow</name>
--                                    <enum>Sunken</enum>
--                                </property>
--                                <property stdset="1">
--                                    <name>text</name>
--                                    <string></string>
--                                </property>
--                            </widget>
--                        </vbox>
--                    </widget>
--                </vbox>
--            </widget>
--            <widget>
--                <class>QWidget</class>
--                <property stdset="1">
--                    <name>name</name>
--                    <cstring>configuration_page</cstring>
-+                <property name="text">
-+                 <string>Profile &amp;kernel</string>
-                 </property>
--                <attribute>
--                    <name>title</name>
--                    <string>&amp;Configuration</string>
--                </attribute>
--                <vbox>
--                    <property stdset="1">
--                        <name>margin</name>
--                        <number>11</number>
--                    </property>
--                    <property stdset="1">
--                        <name>spacing</name>
--                        <number>6</number>
--                    </property>
--                    <widget>
--                        <class>QLayoutWidget</class>
--                        <property stdset="1">
--                            <name>name</name>
--                            <cstring>Layout11</cstring>
--                        </property>
--                        <hbox>
--                            <property stdset="1">
--                                <name>margin</name>
--                                <number>0</number>
--                            </property>
--                            <property stdset="1">
--                                <name>spacing</name>
--                                <number>6</number>
--                            </property>
--                            <widget>
--                                <class>QLabel</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>TextLabel1</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>text</name>
--                                    <string>&amp;Kernel image file</string>
--                                </property>
--                                <property>
--                                    <name>buddy</name>
--                                    <cstring>kernel_filename_edit</cstring>
--                                </property>
--                            </widget>
--                            <widget>
--                                <class>QLineEdit</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>kernel_filename_edit</cstring>
--                                </property>
--                                <property>
--                                    <name>toolTip</name>
--                                    <string>The vmlinux file of the running kernel</string>
--                                </property>
--                            </widget>
--                            <widget>
--                                <class>QToolButton</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>kernel_filename_tb</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>text</name>
--                                    <string>...</string>
--                                </property>
--                            </widget>
--                            <widget>
--                                <class>QCheckBox</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>no_vmlinux</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>text</name>
--                                    <string>No kernel image</string>
--                                </property>
--                                <property>
--                                    <name>toolTip</name>
--                                    <string>No kernel image available. Disables kernel profiling.</string>
--                                </property>
--                            </widget>
--                        </hbox>
--                    </widget>
--                    <widget>
--                        <class>QLayoutWidget</class>
--                        <property stdset="1">
--                            <name>name</name>
--                            <cstring>Layout12</cstring>
--                        </property>
--                        <hbox>
--                            <property stdset="1">
--                                <name>margin</name>
--                                <number>0</number>
--                            </property>
--                            <property stdset="1">
--                                <name>spacing</name>
--                                <number>6</number>
--                            </property>
--                            <widget>
--                                <class>QLayoutWidget</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>Layout11</cstring>
--                                </property>
--                                <grid>
--                                    <property stdset="1">
--                                        <name>margin</name>
--                                        <number>0</number>
--                                    </property>
--                                    <property stdset="1">
--                                        <name>spacing</name>
--                                        <number>6</number>
--                                    </property>
--                                    <widget row="0"  column="1" >
--                                        <class>QLineEdit</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>buffer_size_edit</cstring>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>The size of the profiler's buffers</string>
--                                        </property>
--                                    </widget>
--                                    <widget row="1"  column="1" >
--                                        <class>QLineEdit</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>note_table_size_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="3"  column="0" >
--                                        <class>QLabel</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>cpu_buffer_size_label</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Cpu buffer size</string>
--                                        </property>
--                                        <property>
--                                            <name>buddy</name>
--                                            <cstring>cpu_buffer_size_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="3"  column="1" >
--                                        <class>QLineEdit</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>cpu_buffer_size_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="0"  column="0" >
--                                        <class>QLabel</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>buffer_size_label</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>&amp;Buffer size</string>
--                                        </property>
--                                        <property>
--                                            <name>buddy</name>
--                                            <cstring>buffer_size_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="1"  column="0" >
--                                        <class>QLabel</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>note_table_size_label</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Note Size</string>
--                                        </property>
--                                        <property>
--                                            <name>buddy</name>
--                                            <cstring>note_table_size_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="2"  column="1" >
--                                        <class>QLineEdit</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>buffer_watershed_edit</cstring>
--                                        </property>
--                                    </widget>
--                                    <widget row="2"  column="0" >
--                                        <class>QLabel</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>buffer_watershed_label</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Buffer watershed</string>
--                                        </property>
--                                        <property>
--                                            <name>buddy</name>
--                                            <cstring>buffer_watershed_edit</cstring>
--                                        </property>
--                                    </widget>
--                                </grid>
--                            </widget>
--                            <spacer>
--                                <property>
--                                    <name>name</name>
--                                    <cstring>Spacer11</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>orientation</name>
--                                    <enum>Horizontal</enum>
--                                </property>
--                                <property stdset="1">
--                                    <name>sizeType</name>
--                                    <enum>Expanding</enum>
--                                </property>
--                                <property>
--                                    <name>sizeHint</name>
--                                    <size>
--                                        <width>20</width>
--                                        <height>20</height>
--                                    </size>
--                                </property>
--                            </spacer>
--                        </hbox>
--                    </widget>
--                    <widget>
--                        <class>QLayoutWidget</class>
--                        <property stdset="1">
--                            <name>name</name>
--                            <cstring>Layout36</cstring>
--                        </property>
--                        <grid>
--                            <property stdset="1">
--                                <name>margin</name>
--                                <number>0</number>
--                            </property>
--                            <property stdset="1">
--                                <name>spacing</name>
--                                <number>6</number>
--                            </property>
--                            <widget row="0"  column="0" >
--                                <class>QLayoutWidget</class>
--                                <property stdset="1">
--                                    <name>name</name>
--                                    <cstring>Layout34</cstring>
--                                </property>
--                                <vbox>
--                                    <property stdset="1">
--                                        <name>margin</name>
--                                        <number>0</number>
--                                    </property>
--                                    <property stdset="1">
--                                        <name>spacing</name>
--                                        <number>6</number>
--                                    </property>
--                                    <widget>
--                                        <class>QCheckBox</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>verbose</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>&amp;Verbose</string>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Very verbose output in log file</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QCheckBox</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>separate_lib_cb</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Per-application profiles</string>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Separate samples for each shared library. This increases the time and space overhead of OProfile.</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QCheckBox</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>separate_kernel_cb</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Per-application profiles, including kernel</string>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QCheckBox</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>separate_cpu_cb</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Per-CPU profiles</string>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QCheckBox</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>separate_thread_cb</cstring>
--                                        </property>
--                                        <property stdset="1">
--                                            <name>text</name>
--                                            <string>Per-thread/task profiles</string>
--                                        </property>
--                                        <property>
--                                            <name>toolTip</name>
--                                            <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
--                                        </property>
--                                    </widget>
--                                    <widget>
--                                        <class>QLayoutWidget</class>
--                                        <property stdset="1">
--                                            <name>name</name>
--                                            <cstring>Layout33</cstring>
--                                        </property>
--                                        <hbox>
--                                            <property stdset="1">
--                                                <name>margin</name>
--                                                <number>0</number>
--                                            </property>
--                                            <property stdset="1">
--                                                <name>spacing</name>
--                                                <number>6</number>
--                                            </property>
--                                            <widget>
--                                                <class>QLabel</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>callgraph_depth_label</cstring>
--                                                </property>
--                                                <property stdset="1">
--                                                    <name>text</name>
--                                                    <string>callgraph depth, zero to disable</string>
--                                                </property>
--                                                <property>
--                                                    <name>buddy</name>
--                                                    <cstring>callgraph_depth_edit</cstring>
--                                                </property>
--                                            </widget>
--                                            <widget>
--                                                <class>QLineEdit</class>
--                                                <property stdset="1">
--                                                    <name>name</name>
--                                                    <cstring>callgraph_depth_edit</cstring>
--                                                </property>
--                                            </widget>
--                                        </hbox>
--                                    </widget>
--                                </vbox>
--                            </widget>
--                            <spacer row="0"  column="1" >
--                                <property>
--                                    <name>name</name>
--                                    <cstring>Spacer12</cstring>
--                                </property>
--                                <property stdset="1">
--                                    <name>orientation</name>
--                                    <enum>Horizontal</enum>
--                                </property>
--                                <property stdset="1">
--                                    <name>sizeType</name>
--                                    <enum>Expanding</enum>
--                                </property>
--                                <property>
--                                    <name>sizeHint</name>
--                                    <size>
--                                        <width>20</width>
--                                        <height>20</height>
--                                    </size>
--                                </property>
--                            </spacer>
--                        </grid>
--                    </widget>
--                    <spacer>
--                        <property>
--                            <name>name</name>
--                            <cstring>Spacer9</cstring>
--                        </property>
--                        <property stdset="1">
--                            <name>orientation</name>
--                            <enum>Vertical</enum>
--                        </property>
--                        <property stdset="1">
--                            <name>sizeType</name>
--                            <enum>Expanding</enum>
--                        </property>
--                        <property>
--                            <name>sizeHint</name>
--                            <size>
--                                <width>20</width>
--                                <height>20</height>
--                            </size>
--                        </property>
--                    </spacer>
--                </vbox>
--            </widget>
--        </widget>
--        <widget>
--            <class>QLabel</class>
--            <property stdset="1">
--                <name>name</name>
--                <cstring>daemon_label</cstring>
-+               </widget>
-+              </item>
-+              <item>
-+               <widget class="QCheckBox" name="user_ring_count_cb">
-+                <property name="toolTip">
-+                 <string>Profile user libraries and applications</string>
-+                </property>
-+                <property name="text">
-+                 <string>Profile &amp;user binaries</string>
-+                </property>
-+               </widget>
-+              </item>
-+              <item>
-+               <layout class="QHBoxLayout">
-+                <property name="spacing">
-+                 <number>6</number>
-+                </property>
-+                <property name="margin">
-+                 <number>0</number>
-+                </property>
-+                <item>
-+                 <widget class="QLabel" name="TextLabel1_2">
-+                  <property name="text">
-+                   <string>C&amp;ount</string>
-+                  </property>
-+                  <property name="wordWrap">
-+                   <bool>false</bool>
-+                  </property>
-+                  <property name="buddy">
-+                   <cstring>event_count_edit</cstring>
-+                  </property>
-+                 </widget>
-+                </item>
-+                <item>
-+                 <widget class="QLineEdit" name="event_count_edit">
-+                  <property name="sizePolicy">
-+                   <sizepolicy hsizetype="Minimum" vsizetype="Fixed">
-+                    <horstretch>0</horstretch>
-+                    <verstretch>0</verstretch>
-+                   </sizepolicy>
-+                  </property>
-+                  <property name="toolTip">
-+                   <string>Set the count value</string>
-+                  </property>
-+                 </widget>
-+                </item>
-+                <item>
-+                 <spacer name="Spacer13_2">
-+                  <property name="orientation">
-+                   <enum>Qt::Horizontal</enum>
-+                  </property>
-+                  <property name="sizeType">
-+                   <enum>QSizePolicy::Expanding</enum>
-+                  </property>
-+                  <property name="sizeHint" stdset="0">
-+                   <size>
-+                    <width>20</width>
-+                    <height>20</height>
-+                   </size>
-+                  </property>
-+                 </spacer>
-+                </item>
-+               </layout>
-+              </item>
-+              <item>
-+               <widget class="Q3ButtonGroup" name="unit_mask_group">
-+                <property name="sizePolicy">
-+                 <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
-+                  <horstretch>0</horstretch>
-+                  <verstretch>0</verstretch>
-+                 </sizepolicy>
-+                </property>
-+                <property name="toolTip">
-+                 <string>Unit mask settings for this event</string>
-+                </property>
-+                <property name="title">
-+                 <string>Unit mask</string>
-+                </property>
-+                <layout class="QGridLayout">
-+                 <property name="margin">
-+                  <number>11</number>
-+                 </property>
-+                 <property name="spacing">
-+                  <number>6</number>
-+                 </property>
-+                 <item row="0" column="0">
-+                  <widget class="QCheckBox" name="check0">
-+                   <property name="text">
-+                    <string>check0</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="1" column="0" rowspan="2" colspan="2">
-+                  <widget class="QCheckBox" name="check1">
-+                   <property name="text">
-+                    <string>check1</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="3" column="0" rowspan="2" colspan="2">
-+                  <widget class="QCheckBox" name="check2">
-+                   <property name="text">
-+                    <string>check2</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="5" column="0">
-+                  <widget class="QCheckBox" name="check3">
-+                   <property name="text">
-+                    <string>check3</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="6" column="0">
-+                  <widget class="QCheckBox" name="check4">
-+                   <property name="text">
-+                    <string>check4</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="7" column="0">
-+                  <widget class="QCheckBox" name="check5">
-+                   <property name="text">
-+                    <string>check5</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="8" column="0" rowspan="2" colspan="2">
-+                  <widget class="QCheckBox" name="check6">
-+                   <property name="text">
-+                    <string>check6</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="10" column="0">
-+                  <widget class="QCheckBox" name="check7">
-+                   <property name="text">
-+                    <string>check7</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="11" column="1">
-+                  <spacer name="Spacer14">
-+                   <property name="orientation">
-+                    <enum>Qt::Vertical</enum>
-+                   </property>
-+                   <property name="sizeType">
-+                    <enum>QSizePolicy::Expanding</enum>
-+                   </property>
-+                   <property name="sizeHint" stdset="0">
-+                    <size>
-+                     <width>20</width>
-+                     <height>20</height>
-+                    </size>
-+                   </property>
-+                  </spacer>
-+                 </item>
-+                 <item row="5" column="1">
-+                  <widget class="QCheckBox" name="check11">
-+                   <property name="text">
-+                    <string>check11</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="7" column="1">
-+                  <widget class="QCheckBox" name="check13">
-+                   <property name="text">
-+                    <string>check13</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="10" column="1">
-+                  <widget class="QCheckBox" name="check15">
-+                   <property name="text">
-+                    <string>check15</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="4" column="1">
-+                  <widget class="QCheckBox" name="check10">
-+                   <property name="text">
-+                    <string>check10</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="9" column="1">
-+                  <widget class="QCheckBox" name="check14">
-+                   <property name="text">
-+                    <string>check14</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="2" column="1">
-+                  <widget class="QCheckBox" name="check9">
-+                   <property name="text">
-+                    <string>check9</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="0" column="1">
-+                  <widget class="QCheckBox" name="check8">
-+                   <property name="text">
-+                    <string>check8</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                 <item row="6" column="1">
-+                  <widget class="QCheckBox" name="check12">
-+                   <property name="text">
-+                    <string>check12</string>
-+                   </property>
-+                   <attribute name="buttonGroup">
-+                    <string/>
-+                   </attribute>
-+                  </widget>
-+                 </item>
-+                </layout>
-+               </widget>
-+              </item>
-+             </layout>
-+            </item>
-+           </layout>
-+          </item>
-+          <item>
-+           <widget class="QLabel" name="event_help_label">
-+            <property name="enabled">
-+             <bool>true</bool>
-             </property>
--            <property stdset="1">
--                <name>frameShape</name>
--                <enum>Panel</enum>
-+            <property name="sizePolicy">
-+             <sizepolicy hsizetype="Minimum" vsizetype="Minimum">
-+              <horstretch>0</horstretch>
-+              <verstretch>0</verstretch>
-+             </sizepolicy>
-             </property>
--            <property stdset="1">
--                <name>frameShadow</name>
--                <enum>Sunken</enum>
-+            <property name="frameShape">
-+             <enum>QFrame::Panel</enum>
-             </property>
--            <property stdset="1">
--                <name>text</name>
--                <string></string>
-+            <property name="frameShadow">
-+             <enum>QFrame::Sunken</enum>
-             </property>
--            <property>
--                <name>toolTip</name>
--                <string>Current daemon status</string>
-+            <property name="text">
-+             <string/>
-             </property>
--        </widget>
--        <widget>
--            <class>QLayoutWidget</class>
--            <property stdset="1">
--                <name>name</name>
--                <cstring>Layout37</cstring>
-+            <property name="wordWrap">
-+             <bool>false</bool>
-             </property>
--            <hbox>
--                <property stdset="1">
--                    <name>margin</name>
--                    <number>0</number>
--                </property>
--                <property stdset="1">
--                    <name>spacing</name>
--                    <number>6</number>
--                </property>
--                <widget>
--                    <class>QPushButton</class>
--                    <property stdset="1">
--                        <name>name</name>
--                        <cstring>start_profiler_btn</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>text</name>
--                        <string>St&amp;art</string>
--                    </property>
--                </widget>
--                <widget>
--                    <class>QPushButton</class>
--                    <property stdset="1">
--                        <name>name</name>
--                        <cstring>flush_profiler_data_btn</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>text</name>
--                        <string>&amp;Flush</string>
--                    </property>
--                </widget>
--                <widget>
--                    <class>QPushButton</class>
--                    <property stdset="1">
--                        <name>name</name>
--                        <cstring>stop_profiler_btn</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>text</name>
--                        <string>Stop</string>
--                    </property>
--                </widget>
--                <spacer>
--                    <property>
--                        <name>name</name>
--                        <cstring>Spacer5</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>orientation</name>
--                        <enum>Horizontal</enum>
--                    </property>
--                    <property stdset="1">
--                        <name>sizeType</name>
--                        <enum>Expanding</enum>
--                    </property>
--                    <property>
--                        <name>sizeHint</name>
--                        <size>
--                            <width>20</width>
--                            <height>20</height>
--                        </size>
--                    </property>
--                </spacer>
--                <widget>
--                    <class>QPushButton</class>
--                    <property stdset="1">
--                        <name>name</name>
--                        <cstring>reset_sample_files_btn</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>text</name>
--                        <string>Reset sample files</string>
--                    </property>
--                </widget>
--                <widget>
--                    <class>QPushButton</class>
--                    <property stdset="1">
--                        <name>name</name>
--                        <cstring>quit_and_save_btn</cstring>
--                    </property>
--                    <property stdset="1">
--                        <name>text</name>
--                        <string>Save and &amp;quit</string>
--                    </property>
--                    <property stdset="1">
--                        <name>autoDefault</name>
--                        <bool>true</bool>
--                    </property>
--                </widget>
--            </hbox>
-+           </widget>
-+          </item>
-+         </layout>
-         </widget>
--    </vbox>
--</widget>
--<connections>
--    <connection>
--        <sender>start_profiler_btn</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>on_start_profiler()</slot>
--    </connection>
--    <connection>
--        <sender>stop_profiler_btn</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>on_stop_profiler()</slot>
--    </connection>
--    <connection>
--        <sender>flush_profiler_data_btn</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>on_flush_profiler_data()</slot>
--    </connection>
--    <connection>
--        <sender>quit_and_save_btn</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>accept()</slot>
--    </connection>
--    <connection>
--        <sender>kernel_filename_tb</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>choose_kernel_filename()</slot>
--    </connection>
--    <connection>
--        <sender>no_vmlinux</sender>
--        <signal>toggled(bool)</signal>
--        <receiver>kernel_filename_tb</receiver>
--        <slot>setDisabled(bool)</slot>
--    </connection>
--    <connection>
--        <sender>no_vmlinux</sender>
--        <signal>toggled(bool)</signal>
--        <receiver>kernel_filename_edit</receiver>
--        <slot>setDisabled(bool)</slot>
--    </connection>
--    <connection>
--        <sender>no_vmlinux</sender>
--        <signal>toggled(bool)</signal>
--        <receiver>TextLabel1</receiver>
--        <slot>setDisabled(bool)</slot>
--    </connection>
--    <connection>
--        <sender>separate_kernel_cb</sender>
--        <signal>stateChanged(int)</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>on_separate_kernel_cb_changed(int)</slot>
--    </connection>
--    <connection>
--        <sender>reset_sample_files_btn</sender>
--        <signal>clicked()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>on_reset_sample_files()</slot>
--    </connection>
--    <connection>
--        <sender>events_list</sender>
--        <signal>selectionChanged()</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>event_selected()</slot>
--    </connection>
--    <connection>
--        <sender>events_list</sender>
--        <signal>currentChanged(QListViewItem*)</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>event_over(QListViewItem *)</slot>
--    </connection>
--    <connection>
--        <sender>events_list</sender>
--        <signal>onItem(QListViewItem*)</signal>
--        <receiver>oprof_start_base</receiver>
--        <slot>event_over(QListViewItem *)</slot>
--    </connection>
--    <slot access="protected">choose_kernel_filename()</slot>
--    <slot access="protected">event_over(QListViewItem *)</slot>
--    <slot access="protected">event_selected()</slot>
--    <slot access="protected">on_reset_sample_files()</slot>
--    <slot access="protected">on_flush_profiler_data()</slot>
--    <slot access="protected">on_separate_kernel_cb_changed(int)</slot>
--    <slot access="protected">on_start_profiler()</slot>
--    <slot access="protected">on_stop_profiler()</slot>
--</connections>
--<tabstops>
--    <tabstop>setup_config_tab</tabstop>
--    <tabstop>events_list</tabstop>
--    <tabstop>os_ring_count_cb</tabstop>
--    <tabstop>user_ring_count_cb</tabstop>
--    <tabstop>event_count_edit</tabstop>
--    <tabstop>check0</tabstop>
--    <tabstop>check1</tabstop>
--    <tabstop>check2</tabstop>
--    <tabstop>check3</tabstop>
--    <tabstop>check4</tabstop>
--    <tabstop>check5</tabstop>
--    <tabstop>check6</tabstop>
--    <tabstop>check7</tabstop>
--    <tabstop>check8</tabstop>
--    <tabstop>check9</tabstop>
--    <tabstop>check10</tabstop>
--    <tabstop>check11</tabstop>
--    <tabstop>check12</tabstop>
--    <tabstop>check13</tabstop>
--    <tabstop>check14</tabstop>
--    <tabstop>check15</tabstop>
--    <tabstop>start_profiler_btn</tabstop>
--    <tabstop>flush_profiler_data_btn</tabstop>
--    <tabstop>stop_profiler_btn</tabstop>
--    <tabstop>reset_sample_files_btn</tabstop>
--    <tabstop>quit_and_save_btn</tabstop>
--    <tabstop>kernel_filename_edit</tabstop>
--    <tabstop>no_vmlinux</tabstop>
--    <tabstop>buffer_size_edit</tabstop>
--    <tabstop>note_table_size_edit</tabstop>
--    <tabstop>buffer_watershed_edit</tabstop>
--    <tabstop>verbose</tabstop>
--    <tabstop>separate_lib_cb</tabstop>
--    <tabstop>separate_kernel_cb</tabstop>
--    <tabstop>separate_cpu_cb</tabstop>
--    <tabstop>separate_thread_cb</tabstop>
--    <tabstop>callgraph_depth_edit</tabstop>
--</tabstops>
--</UI>
-+       </item>
-+      </layout>
-+     </widget>
-+     <widget class="QWidget" name="configuration_page">
-+      <attribute name="title">
-+       <string>&amp;Configuration</string>
-+      </attribute>
-+      <layout class="QVBoxLayout">
-+       <property name="spacing">
-+        <number>6</number>
-+       </property>
-+       <property name="margin">
-+        <number>11</number>
-+       </property>
-+       <item>
-+        <layout class="QHBoxLayout">
-+         <property name="spacing">
-+          <number>6</number>
-+         </property>
-+         <property name="margin">
-+          <number>0</number>
-+         </property>
-+         <item>
-+          <widget class="QLabel" name="TextLabel1">
-+           <property name="text">
-+            <string>&amp;Kernel image file</string>
-+           </property>
-+           <property name="wordWrap">
-+            <bool>false</bool>
-+           </property>
-+           <property name="buddy">
-+            <cstring>kernel_filename_edit</cstring>
-+           </property>
-+          </widget>
-+         </item>
-+         <item>
-+          <widget class="QLineEdit" name="kernel_filename_edit">
-+           <property name="toolTip">
-+            <string>The vmlinux file of the running kernel</string>
-+           </property>
-+          </widget>
-+         </item>
-+         <item>
-+          <widget class="QToolButton" name="kernel_filename_tb">
-+           <property name="text">
-+            <string>...</string>
-+           </property>
-+          </widget>
-+         </item>
-+         <item>
-+          <widget class="QCheckBox" name="no_vmlinux">
-+           <property name="toolTip">
-+            <string>No kernel image available. Disables kernel profiling.</string>
-+           </property>
-+           <property name="text">
-+            <string>No kernel image</string>
-+           </property>
-+          </widget>
-+         </item>
-+        </layout>
-+       </item>
-+       <item>
-+        <layout class="QHBoxLayout">
-+         <property name="spacing">
-+          <number>6</number>
-+         </property>
-+         <property name="margin">
-+          <number>0</number>
-+         </property>
-+         <item>
-+          <layout class="QGridLayout">
-+           <property name="margin">
-+            <number>0</number>
-+           </property>
-+           <property name="spacing">
-+            <number>6</number>
-+           </property>
-+           <item row="0" column="1">
-+            <widget class="QLineEdit" name="buffer_size_edit">
-+             <property name="toolTip">
-+              <string>The size of the profiler's buffers</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item row="1" column="1">
-+            <widget class="QLineEdit" name="note_table_size_edit"/>
-+           </item>
-+           <item row="3" column="0">
-+            <widget class="QLabel" name="cpu_buffer_size_label">
-+             <property name="text">
-+              <string>Cpu buffer size</string>
-+             </property>
-+             <property name="wordWrap">
-+              <bool>false</bool>
-+             </property>
-+             <property name="buddy">
-+              <cstring>cpu_buffer_size_edit</cstring>
-+             </property>
-+            </widget>
-+           </item>
-+           <item row="3" column="1">
-+            <widget class="QLineEdit" name="cpu_buffer_size_edit"/>
-+           </item>
-+           <item row="0" column="0">
-+            <widget class="QLabel" name="buffer_size_label">
-+             <property name="text">
-+              <string>&amp;Buffer size</string>
-+             </property>
-+             <property name="wordWrap">
-+              <bool>false</bool>
-+             </property>
-+             <property name="buddy">
-+              <cstring>buffer_size_edit</cstring>
-+             </property>
-+            </widget>
-+           </item>
-+           <item row="1" column="0">
-+            <widget class="QLabel" name="note_table_size_label">
-+             <property name="text">
-+              <string>Note Size</string>
-+             </property>
-+             <property name="wordWrap">
-+              <bool>false</bool>
-+             </property>
-+             <property name="buddy">
-+              <cstring>note_table_size_edit</cstring>
-+             </property>
-+            </widget>
-+           </item>
-+           <item row="2" column="1">
-+            <widget class="QLineEdit" name="buffer_watershed_edit"/>
-+           </item>
-+           <item row="2" column="0">
-+            <widget class="QLabel" name="buffer_watershed_label">
-+             <property name="text">
-+              <string>Buffer watershed</string>
-+             </property>
-+             <property name="wordWrap">
-+              <bool>false</bool>
-+             </property>
-+             <property name="buddy">
-+              <cstring>buffer_watershed_edit</cstring>
-+             </property>
-+            </widget>
-+           </item>
-+          </layout>
-+         </item>
-+         <item>
-+          <spacer name="Spacer11">
-+           <property name="orientation">
-+            <enum>Qt::Horizontal</enum>
-+           </property>
-+           <property name="sizeType">
-+            <enum>QSizePolicy::Expanding</enum>
-+           </property>
-+           <property name="sizeHint" stdset="0">
-+            <size>
-+             <width>20</width>
-+             <height>20</height>
-+            </size>
-+           </property>
-+          </spacer>
-+         </item>
-+        </layout>
-+       </item>
-+       <item>
-+        <layout class="QGridLayout">
-+         <property name="margin">
-+          <number>0</number>
-+         </property>
-+         <property name="spacing">
-+          <number>6</number>
-+         </property>
-+         <item row="0" column="0">
-+          <layout class="QVBoxLayout">
-+           <property name="spacing">
-+            <number>6</number>
-+           </property>
-+           <property name="margin">
-+            <number>0</number>
-+           </property>
-+           <item>
-+            <widget class="QCheckBox" name="verbose">
-+             <property name="toolTip">
-+              <string>Very verbose output in log file</string>
-+             </property>
-+             <property name="text">
-+              <string>&amp;Verbose</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item>
-+            <widget class="QCheckBox" name="separate_lib_cb">
-+             <property name="toolTip">
-+              <string>Separate samples for each shared library. This increases the time and space overhead of OProfile.</string>
-+             </property>
-+             <property name="text">
-+              <string>Per-application profiles</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item>
-+            <widget class="QCheckBox" name="separate_kernel_cb">
-+             <property name="toolTip">
-+              <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
-+             </property>
-+             <property name="text">
-+              <string>Per-application profiles, including kernel</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item>
-+            <widget class="QCheckBox" name="separate_cpu_cb">
-+             <property name="toolTip">
-+              <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
-+             </property>
-+             <property name="text">
-+              <string>Per-CPU profiles</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item>
-+            <widget class="QCheckBox" name="separate_thread_cb">
-+             <property name="toolTip">
-+              <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string>
-+             </property>
-+             <property name="text">
-+              <string>Per-thread/task profiles</string>
-+             </property>
-+            </widget>
-+           </item>
-+           <item>
-+            <layout class="QHBoxLayout">
-+             <property name="spacing">
-+              <number>6</number>
-+             </property>
-+             <property name="margin">
-+              <number>0</number>
-+             </property>
-+             <item>
-+              <widget class="QLabel" name="callgraph_depth_label">
-+               <property name="text">
-+                <string>callgraph depth, zero to disable</string>
-+               </property>
-+               <property name="wordWrap">
-+                <bool>false</bool>
-+               </property>
-+               <property name="buddy">
-+                <cstring>callgraph_depth_edit</cstring>
-+               </property>
-+              </widget>
-+             </item>
-+             <item>
-+              <widget class="QLineEdit" name="callgraph_depth_edit"/>
-+             </item>
-+            </layout>
-+           </item>
-+          </layout>
-+         </item>
-+         <item row="0" column="1">
-+          <spacer name="Spacer12">
-+           <property name="orientation">
-+            <enum>Qt::Horizontal</enum>
-+           </property>
-+           <property name="sizeType">
-+            <enum>QSizePolicy::Expanding</enum>
-+           </property>
-+           <property name="sizeHint" stdset="0">
-+            <size>
-+             <width>20</width>
-+             <height>20</height>
-+            </size>
-+           </property>
-+          </spacer>
-+         </item>
-+        </layout>
-+       </item>
-+       <item>
-+        <spacer name="Spacer9">
-+         <property name="orientation">
-+          <enum>Qt::Vertical</enum>
-+         </property>
-+         <property name="sizeType">
-+          <enum>QSizePolicy::Expanding</enum>
-+         </property>
-+         <property name="sizeHint" stdset="0">
-+          <size>
-+           <width>20</width>
-+           <height>20</height>
-+          </size>
-+         </property>
-+        </spacer>
-+       </item>
-+      </layout>
-+     </widget>
-+    </widget>
-+   </item>
-+   <item>
-+    <widget class="QLabel" name="daemon_label">
-+     <property name="toolTip">
-+      <string>Current daemon status</string>
-+     </property>
-+     <property name="frameShape">
-+      <enum>QFrame::Panel</enum>
-+     </property>
-+     <property name="frameShadow">
-+      <enum>QFrame::Sunken</enum>
-+     </property>
-+     <property name="text">
-+      <string/>
-+     </property>
-+     <property name="wordWrap">
-+      <bool>false</bool>
-+     </property>
-+    </widget>
-+   </item>
-+   <item>
-+    <layout class="QHBoxLayout">
-+     <property name="spacing">
-+      <number>6</number>
-+     </property>
-+     <property name="margin">
-+      <number>0</number>
-+     </property>
-+     <item>
-+      <widget class="QPushButton" name="start_profiler_btn">
-+       <property name="text">
-+        <string>St&amp;art</string>
-+       </property>
-+      </widget>
-+     </item>
-+     <item>
-+      <widget class="QPushButton" name="flush_profiler_data_btn">
-+       <property name="text">
-+        <string>&amp;Flush</string>
-+       </property>
-+      </widget>
-+     </item>
-+     <item>
-+      <widget class="QPushButton" name="stop_profiler_btn">
-+       <property name="text">
-+        <string>Stop</string>
-+       </property>
-+      </widget>
-+     </item>
-+     <item>
-+      <spacer name="Spacer5">
-+       <property name="orientation">
-+        <enum>Qt::Horizontal</enum>
-+       </property>
-+       <property name="sizeType">
-+        <enum>QSizePolicy::Expanding</enum>
-+       </property>
-+       <property name="sizeHint" stdset="0">
-+        <size>
-+         <width>20</width>
-+         <height>20</height>
-+        </size>
-+       </property>
-+      </spacer>
-+     </item>
-+     <item>
-+      <widget class="QPushButton" name="reset_sample_files_btn">
-+       <property name="text">
-+        <string>Reset sample files</string>
-+       </property>
-+      </widget>
-+     </item>
-+     <item>
-+      <widget class="QPushButton" name="quit_and_save_btn">
-+       <property name="text">
-+        <string>Save and &amp;quit</string>
-+       </property>
-+       <property name="autoDefault">
-+        <bool>true</bool>
-+       </property>
-+      </widget>
-+     </item>
-+    </layout>
-+   </item>
-+  </layout>
-+ </widget>
-+ <pixmapfunction>qPixmapFromMimeSource</pixmapfunction>
-+ <customwidgets>
-+  <customwidget>
-+   <class>Q3GroupBox</class>
-+   <extends>QGroupBox</extends>
-+   <header>Qt3Support/Q3GroupBox</header>
-+   <container>1</container>
-+  </customwidget>
-+  <customwidget>
-+   <class>Q3Frame</class>
-+   <extends>QFrame</extends>
-+   <header>Qt3Support/Q3Frame</header>
-+   <container>1</container>
-+  </customwidget>
-+  <customwidget>
-+   <class>Q3ButtonGroup</class>
-+   <extends>Q3GroupBox</extends>
-+   <header>Qt3Support/Q3ButtonGroup</header>
-+   <container>1</container>
-+  </customwidget>
-+  <customwidget>
-+   <class>Q3ListView</class>
-+   <extends>Q3Frame</extends>
-+   <header>q3listview.h</header>
-+  </customwidget>
-+ </customwidgets>
-+ <tabstops>
-+  <tabstop>setup_config_tab</tabstop>
-+  <tabstop>events_list</tabstop>
-+  <tabstop>os_ring_count_cb</tabstop>
-+  <tabstop>user_ring_count_cb</tabstop>
-+  <tabstop>event_count_edit</tabstop>
-+  <tabstop>check0</tabstop>
-+  <tabstop>check1</tabstop>
-+  <tabstop>check2</tabstop>
-+  <tabstop>check3</tabstop>
-+  <tabstop>check4</tabstop>
-+  <tabstop>check5</tabstop>
-+  <tabstop>check6</tabstop>
-+  <tabstop>check7</tabstop>
-+  <tabstop>check8</tabstop>
-+  <tabstop>check9</tabstop>
-+  <tabstop>check10</tabstop>
-+  <tabstop>check11</tabstop>
-+  <tabstop>check12</tabstop>
-+  <tabstop>check13</tabstop>
-+  <tabstop>check14</tabstop>
-+  <tabstop>check15</tabstop>
-+  <tabstop>start_profiler_btn</tabstop>
-+  <tabstop>flush_profiler_data_btn</tabstop>
-+  <tabstop>stop_profiler_btn</tabstop>
-+  <tabstop>reset_sample_files_btn</tabstop>
-+  <tabstop>quit_and_save_btn</tabstop>
-+  <tabstop>kernel_filename_edit</tabstop>
-+  <tabstop>no_vmlinux</tabstop>
-+  <tabstop>buffer_size_edit</tabstop>
-+  <tabstop>note_table_size_edit</tabstop>
-+  <tabstop>buffer_watershed_edit</tabstop>
-+  <tabstop>verbose</tabstop>
-+  <tabstop>separate_lib_cb</tabstop>
-+  <tabstop>separate_kernel_cb</tabstop>
-+  <tabstop>separate_cpu_cb</tabstop>
-+  <tabstop>separate_thread_cb</tabstop>
-+  <tabstop>callgraph_depth_edit</tabstop>
-+ </tabstops>
-+ <resources/>
-+ <connections>
-+  <connection>
-+   <sender>start_profiler_btn</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>start_profiler()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>stop_profiler_btn</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>stop_profiler()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>flush_profiler_data_btn</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>flush_profiler_data()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>quit_and_save_btn</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>accept()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>kernel_filename_tb</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>choose_kernel_filename()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>no_vmlinux</sender>
-+   <signal>toggled(bool)</signal>
-+   <receiver>kernel_filename_tb</receiver>
-+   <slot>setDisabled(bool)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>no_vmlinux</sender>
-+   <signal>toggled(bool)</signal>
-+   <receiver>kernel_filename_edit</receiver>
-+   <slot>setDisabled(bool)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>no_vmlinux</sender>
-+   <signal>toggled(bool)</signal>
-+   <receiver>TextLabel1</receiver>
-+   <slot>setDisabled(bool)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>separate_kernel_cb</sender>
-+   <signal>stateChanged(int)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>separate_kernel_cb_changed(int)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>reset_sample_files_btn</sender>
-+   <signal>clicked(bool)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>reset_sample_files()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>events_list</sender>
-+   <signal>selectionChanged()</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>event_selected()</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>events_list</sender>
-+   <signal>currentChanged(Q3ListViewItem*)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>event_over(Q3ListViewItem*)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+  <connection>
-+   <sender>events_list</sender>
-+   <signal>onItem(Q3ListViewItem*)</signal>
-+   <receiver>oprof_start_base</receiver>
-+   <slot>event_over(Q3ListViewItem*)</slot>
-+   <hints>
-+    <hint type="sourcelabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+    <hint type="destinationlabel">
-+     <x>20</x>
-+     <y>20</y>
-+    </hint>
-+   </hints>
-+  </connection>
-+ </connections>
-+</ui>
-diff --git a/m4/qt.m4 b/m4/qt.m4
-deleted file mode 100644
-index b0e30ef..0000000
---- a/m4/qt.m4
-+++ /dev/null
-@@ -1,217 +0,0 @@
--dnl find a binary in the path
--AC_DEFUN([QT_FIND_PATH],
--[
--	AC_MSG_CHECKING([for $1])
--	AC_CACHE_VAL(qt_cv_path_$1,
--	[
--		qt_cv_path_$1="NONE"
--		if test -n "$$2"; then
--			qt_cv_path_$1="$$2";
--		else
--			dirs="$3"
--			qt_save_IFS=$IFS
--			IFS=':'
--			for dir in $PATH; do
--				dirs="$dirs $dir"
--			done
--			IFS=$qt_save_IFS
-- 
--			for dir in $dirs; do
--				if test -x "$dir/$1"; then
--					if test -n "$5"; then
--						evalstr="$dir/$1 $5 2>&1 "
--						if eval $evalstr; then
--							qt_cv_path_$1="$dir/$1"
--							break
--						fi
--					else
--						qt_cv_path_$1="$dir/$1"
--						break
--					fi
--				fi
--			done
--		fi
--	])
-- 
--	if test -z "$qt_cv_path_$1" || test "$qt_cv_path_$1" = "NONE"; then
--		AC_MSG_RESULT(not found)
--		$4
--	else
--		AC_MSG_RESULT($qt_cv_path_$1)
--		$2=$qt_cv_path_$1
--	fi
--])
--
--dnl Find the uic compiler on the path or in qt_cv_dir
--AC_DEFUN([QT_FIND_UIC],
--[
--	QT_FIND_PATH(uic, ac_uic, $qt_cv_dir/bin)
--	if test -z "$ac_uic" -a "$FATAL" = 1; then
--		AC_MSG_ERROR([uic binary not found in \$PATH or $qt_cv_dir/bin !])
--	fi
--])
-- 
--dnl Find the right moc in path/qt_cv_dir
--AC_DEFUN([QT_FIND_MOC],
--[
--	QT_FIND_PATH(moc2, ac_moc2, $qt_cv_dir/bin)
--	QT_FIND_PATH(moc, ac_moc1, $qt_cv_dir/bin)
--
--	if test -n "$ac_moc1" -a -n "$ac_moc2"; then
--		dnl found both. Prefer Qt3's if it exists else moc2
--		$ac_moc1 -v 2>&1 | grep "Qt 3" >/dev/null
--		if test "$?" = 0; then
--			ac_moc=$ac_moc1;
--		else
--			ac_moc=$ac_moc2;
--		fi
--	else
--		if test -n "$ac_moc1"; then
--			ac_moc=$ac_moc1;
--		else
--			ac_moc=$ac_moc2;
--		fi
--	fi
--
--	if test -z "$ac_moc"  -a "$FATAL" = 1; then
--		AC_MSG_ERROR([moc binary not found in \$PATH or $qt_cv_dir/bin !])
--	fi
--])
--
--dnl check a particular libname
--AC_DEFUN([QT_TRY_LINK],
--[
--	SAVE_LIBS="$LIBS"
--	LIBS="$LIBS $1"
--	AC_TRY_LINK([
--	#include <qglobal.h>
--	#include <qstring.h>
--		],
--	[
--	QString s("mangle_failure");
--	#if (QT_VERSION < 221)
--	break_me_(\\\);
--	#endif
--	],
--	qt_cv_libname=$1,
--	)
--	LIBS="$SAVE_LIBS"
--])
-- 
--dnl check we can do a compile
--AC_DEFUN([QT_CHECK_COMPILE],
--[
--	AC_MSG_CHECKING([for Qt library name])
-- 
--	AC_CACHE_VAL(qt_cv_libname,
--	[
--		AC_LANG_CPLUSPLUS
--		SAVE_CXXFLAGS=$CXXFLAGS
--		CXXFLAGS="$CXXFLAGS $QT_INCLUDES $QT_LDFLAGS" 
--
--		for libname in -lqt-mt -lqt3 -lqt2 -lqt;
--		do
--			QT_TRY_LINK($libname)
--			if test -n "$qt_cv_libname"; then
--				break;
--			fi
--		done
--
--		CXXFLAGS=$SAVE_CXXFLAGS
--	])
--
--	if test -z "$qt_cv_libname"; then
--		AC_MSG_RESULT([failed]) 
--		if test "$FATAL" = 1 ; then
--			AC_MSG_ERROR([Cannot compile a simple Qt executable. Check you have the right \$QTDIR !])
--		fi
--	else
--		AC_MSG_RESULT([$qt_cv_libname])
--	fi
--])
--
--dnl get Qt version we're using
--AC_DEFUN([QT_GET_VERSION],
--[
--	AC_CACHE_CHECK([Qt version],lyx_cv_qtversion,
--	[
--		AC_LANG_CPLUSPLUS
--		SAVE_CPPFLAGS=$CPPFLAGS
--		CPPFLAGS="$CPPFLAGS $QT_INCLUDES"
--
--		cat > conftest.$ac_ext <<EOF
--#line __oline__ "configure"
--#include "confdefs.h"
--#include <qglobal.h>
--"%%%"QT_VERSION_STR"%%%"
--EOF
--		lyx_cv_qtversion=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
--			grep '^"%%%"'  2>/dev/null | \
--			sed -e 's/"%%%"//g' -e 's/"//g'`
--		rm -f conftest.$ac_ext
--		CPPFLAGS=$SAVE_CPPFLAGS
--	])
-- 
--	QT_VERSION=$lyx_cv_qtversion
--	AC_SUBST(QT_VERSION)
--])
-- 
--dnl start here 
--AC_DEFUN([QT_DO_IT_ALL],
--[
--	dnl Please leave this alone. I use this file in
--	dnl oprofile.
--	FATAL=0
--
--	AC_ARG_WITH(qt-dir, [  --with-qt-dir           where the root of Qt is installed ],
--		[ qt_cv_dir=`eval echo "$withval"/` ])
--	 
--	AC_ARG_WITH(qt-includes, [  --with-qt-includes      where the Qt includes are. ],
--		[ qt_cv_includes=`eval echo "$withval"` ])
-- 
--	AC_ARG_WITH(qt-libraries, [  --with-qt-libraries     where the Qt library is installed.],
--		[  qt_cv_libraries=`eval echo "$withval"` ])
--
--	dnl pay attention to $QTDIR unless overridden
--	if test -z "$qt_cv_dir"; then
--		qt_cv_dir=$QTDIR
--	fi
-- 
--	dnl derive inc/lib if needed
--	if test -n "$qt_cv_dir"; then
--		if test -z "$qt_cv_includes"; then
--			qt_cv_includes=$qt_cv_dir/include
--		fi
--		if test -z "$qt_cv_libraries"; then
--			qt_cv_libraries=$qt_cv_dir/lib
--		fi
--	fi
--
--	dnl flags for compilation
--	QT_INCLUDES=
--	QT_LDFLAGS=
--	if test -n "$qt_cv_includes"; then
--		QT_INCLUDES="-isystem $qt_cv_includes"
--	fi
--	if test -n "$qt_cv_libraries"; then
--		QT_LDFLAGS="-L$qt_cv_libraries"
--	fi
--	AC_SUBST(QT_INCLUDES)
--	AC_SUBST(QT_LDFLAGS)
-- 
--	QT_FIND_MOC
--	MOC=$ac_moc
--	AC_SUBST(MOC)
--	QT_FIND_UIC
--	UIC=$ac_uic
--	AC_SUBST(UIC)
--
--	QT_CHECK_COMPILE
-- 
--	QT_LIB=$qt_cv_libname;
--	AC_SUBST(QT_LIB)
--
--	if test -n "$qt_cv_libname"; then
--		QT_GET_VERSION
--	fi
--])
-diff --git a/m4/qt4.m4 b/m4/qt4.m4
-new file mode 100644
-index 0000000..0df96f7
---- /dev/null
-+++ b/m4/qt4.m4
-@@ -0,0 +1,211 @@
-+dnl check a particular libname
-+AC_DEFUN([QT4_TRY_LINK],
-+[
-+	SAVE_LIBS="$LIBS"
-+	LIBS="$LIBS $1"
-+	AC_TRY_LINK([
-+	#include <qglobal.h>
-+	#include <qstring.h>
-+		],
-+	[
-+	QString s("mangle_failure");
-+	#if (QT_VERSION < 400)
-+	break_me_(\\\);
-+	#endif
-+	],
-+	qt4_cv_libname=$1,
-+	)
-+	LIBS="$SAVE_LIBS"
-+])
-+
-+dnl check we can do a compile
-+AC_DEFUN([QT4_CHECK_COMPILE],
-+[
-+	AC_MSG_CHECKING([for Qt 4 library name])
-+
-+	AC_CACHE_VAL(qt4_cv_libname,
-+	[
-+		AC_LANG_CPLUSPLUS
-+		SAVE_CXXFLAGS=$CXXFLAGS
-+		CXXFLAGS="$CXXFLAGS $QT4_INCLUDES $QT4_LDFLAGS"
-+		for libname in -lQtCore -lQtCore4
-+		do
-+			QT4_TRY_LINK($libname)
-+			if test -n "$qt4_cv_libname"; then
-+				QT4_CORE_LIB="$qt4_cv_libname"
-+				break;
-+			fi
-+		done
-+		qt4_cv_libname=
-+		for libname in '-lQtCore -lQtGui' \
-+		               '-lQtCore4 -lQtGui4'
-+		do
-+			QT4_TRY_LINK($libname)
-+			if test -n "$qt4_cv_libname"; then
-+				break;
-+			fi
-+		done
-+		CXXFLAGS=$SAVE_CXXFLAGS
-+	])
-+
-+	if test -z "$qt4_cv_libname"; then
-+		AC_MSG_RESULT([failed])
-+		if test "$FATAL" = 1 ; then
-+			AC_MSG_ERROR([Cannot compile a simple Qt 4 executable. Check you have the right \$QT4DIR !])
-+		fi
-+	else
-+		AC_MSG_RESULT([$qt4_cv_libname])
-+	fi
-+])
-+
-+dnl get Qt version we're using
-+AC_DEFUN([QT4_GET_VERSION],
-+[
-+	AC_CACHE_CHECK([Qt 4 version],lyx_cv_qt4version,
-+	[
-+		AC_LANG_CPLUSPLUS
-+		SAVE_CPPFLAGS=$CPPFLAGS
-+		CPPFLAGS="$CPPFLAGS $QT4_INCLUDES"
-+
-+		cat > conftest.$ac_ext <<EOF
-+#line __oline__ "configure"
-+#include "confdefs.h"
-+#include <qglobal.h>
-+"%%%"QT_VERSION_STR"%%%"
-+EOF
-+		lyx_cv_qt4version=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
-+			grep '^"%%%"'  2>/dev/null | \
-+			sed -e 's/"%%%"//g' -e 's/"//g'`
-+		rm -f conftest.$ac_ext
-+		CPPFLAGS=$SAVE_CPPFLAGS
-+	])
-+
-+	QT4_VERSION=$lyx_cv_qt4version
-+	AC_SUBST(QT4_VERSION)
-+])
-+
-+dnl start here
-+AC_DEFUN([QT4_DO_IT_ALL],
-+[
-+	dnl this variable is precious
-+	AC_ARG_VAR(QT4DIR, [the place where the Qt 4 files are, e.g. /usr/lib/qt4])
-+
-+	dnl Please leave this alone. I use this file in
-+	dnl oprofile.
-+	FATAL=0
-+
-+	AC_ARG_WITH(qt4-dir, [  --with-qt4-dir           where the root of Qt 4 is installed ],
-+		[ qt4_cv_dir=`eval echo "$withval"/` ])
-+
-+	AC_ARG_WITH(qt4-includes, [  --with-qt4-includes      where the Qt 4 includes are. ],
-+		[ qt4_cv_includes=`eval echo "$withval"` ])
-+
-+	AC_ARG_WITH(qt4-libraries, [  --with-qt4-libraries     where the Qt 4 library is installed.],
-+		[  qt4_cv_libraries=`eval echo "$withval"` ])
-+
-+	dnl pay attention to $QT4DIR unless overridden
-+	if test -z "$qt4_cv_dir"; then
-+		qt4_cv_dir=$QT4DIR
-+	fi
-+
-+	dnl derive inc/lib if needed
-+	if test -n "$qt4_cv_dir"; then
-+		if test -z "$qt4_cv_includes"; then
-+			qt4_cv_includes=$qt4_cv_dir/include
-+		fi
-+		if test -z "$qt4_cv_libraries"; then
-+			qt4_cv_libraries=$qt4_cv_dir/lib
-+		fi
-+	fi
-+
-+	dnl compute the binary dir too
-+	if test -n "$qt4_cv_dir"; then
-+		qt4_cv_bin=$qt4_cv_dir/bin
-+	fi
-+
-+	dnl Preprocessor flags
-+	QT4_CPPFLAGS="-DQT_NO_STL -DQT_NO_KEYWORDS"
-+	case ${host} in
-+	*mingw*) QT4_CPPFLAGS="-DQT_DLL $QT4_CPPFLAGS";;
-+	esac
-+	AC_SUBST(QT4_CPPFLAGS)
-+
-+	dnl Check if it possible to do a pkg-config
-+	PKG_PROG_PKG_CONFIG
-+	if test -n "$PKG_CONFIG" ; then
-+		QT4_DO_PKG_CONFIG
-+	fi
-+	if test "$pkg_failed" != "no" ; then
-+		QT4_DO_MANUAL_CONFIG
-+	fi
-+	AC_PATH_PROGS(MOC4, [moc-qt4 moc],[],$qt4_cv_bin:$PATH)
-+	AC_PATH_PROGS(UIC4, [uic-qt4 uic],[],$qt4_cv_bin:$PATH)
-+	AC_PATH_PROGS(RCC4, [rcc-qt4 rcc],[],$qt4_cv_bin:$PATH)
-+])
-+
-+AC_DEFUN([QT4_DO_PKG_CONFIG],
-+[
-+	dnl tell pkg-config to look also in $qt4_cv_dir/lib.
-+	save_PKG_CONFIG_PATH=$PKG_CONFIG_PATH
-+	if test -n "$qt4_cv_dir" ; then
-+	  PKG_CONFIG_PATH=$qt4_cv_dir/lib:$qt4_cv_dir/lib/pkgconfig:$PKG_CONFIG_PATH
-+	  export PKG_CONFIG_PATH
-+	fi
-+	PKG_CHECK_MODULES(QT4_CORE, QtCore,,[:])
-+	if test "$pkg_failed" = "no" ; then
-+		QT4_CORE_INCLUDES=$QT4_CORE_CFLAGS
-+		AC_SUBST(QT4_CORE_INCLUDES)
-+		QT4_CORE_LDFLAGS=`$PKG_CONFIG --libs-only-L QtCore`
-+		AC_SUBST(QT4_CORE_LDFLAGS)
-+		QT4_CORE_LIB=`$PKG_CONFIG --libs-only-l QtCore`
-+		AC_SUBST(QT4_CORE_LIB)
-+	fi
-+	PKG_CHECK_MODULES(QT4_FRONTEND, QtCore QtGui,,[:])
-+	if test "$pkg_failed" = "no" ; then
-+		QT4_INCLUDES=$QT4_FRONTEND_CFLAGS
-+		dnl QT4_LDFLAGS=$QT4_FRONTEND_LIBS
-+		QT4_LDFLAGS=`$PKG_CONFIG --libs-only-L QtCore QtGui`
-+		AC_SUBST(QT4_INCLUDES)
-+		AC_SUBST(QT4_LDFLAGS)
-+		QT4_VERSION=`$PKG_CONFIG --modversion QtCore`
-+		AC_SUBST(QT4_VERSION)
-+		QT4_LIB=`$PKG_CONFIG --libs-only-l QtCore QtGui`
-+		AC_SUBST(QT4_LIB)
-+		LIBS="$LIBS `$PKG_CONFIG --libs-only-other QtCore QtGui`"
-+	fi
-+	PKG_CONFIG_PATH=$save_PKG_CONFIG_PATH
-+])
-+
-+AC_DEFUN([QT4_DO_MANUAL_CONFIG],
-+[
-+	dnl flags for compilation
-+	QT4_INCLUDES=
-+	QT4_LDFLAGS=
-+	QT4_CORE_INCLUDES=
-+	QT4_CORE_LDFLAGS=
-+	if test -n "$qt4_cv_includes"; then
-+		QT4_INCLUDES="-I$qt4_cv_includes"
-+		for i in Qt QtCore QtGui; do
-+			QT4_INCLUDES="$QT4_INCLUDES -I$qt4_cv_includes/$i"
-+		done
-+		QT4_CORE_INCLUDES="-I$qt4_cv_includes -I$qt4_cv_includes/QtCore"
-+	fi
-+	if test -n "$qt4_cv_libraries"; then
-+		QT4_LDFLAGS="-L$qt4_cv_libraries"
-+		QT4_CORE_LDFLAGS="-L$qt4_cv_libraries"
-+	fi
-+	AC_SUBST(QT4_INCLUDES)
-+	AC_SUBST(QT4_CORE_INCLUDES)
-+	AC_SUBST(QT4_LDFLAGS)
-+	AC_SUBST(QT4_CORE_LDFLAGS)
-+
-+	QT4_CHECK_COMPILE
-+
-+	QT4_LIB=$qt4_cv_libname;
-+	AC_SUBST(QT4_LIB)
-+	AC_SUBST(QT4_CORE_LIB)
-+
-+	if test -n "$qt4_cv_libname"; then
-+		QT4_GET_VERSION
-+	fi
-+])
diff --git a/source/d/perl/perl.SlackBuild b/source/d/perl/perl.SlackBuild
index ca044b91..df535c7d 100755
--- a/source/d/perl/perl.SlackBuild
+++ b/source/d/perl/perl.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,9 +24,7 @@
 # originally by:  David Cantrell <david@slackware.com>
 # maintained by:  <volkerdi@slackware.com>
 
-VERSION=5.12.3
-# IMPORTANT: also update -Dinc_version_list with the previous Slackware
-# perl version in ./configure below!
+VERSION=5.16.1
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -46,11 +44,11 @@ TMP=${TMP:-/tmp}
 PKG=$TMP/package-perl
 
 # Additional required modules:
-DBDMYSQL=4.018
-DBI=1.616
-URI=1.58
-XMLPARSER=2.40
-XMLSIMPLE=2.18
+DBDMYSQL=4.021
+DBI=1.622
+URI=1.60
+XMLPARSER=2.41
+XMLSIMPLE=2.20
 
 if [ "$ARCH" = "i386" ]; then
   SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
@@ -119,16 +117,29 @@ fi
 # Configure perl:
 ./Configure -de \
   -Dprefix=/usr \
+  -Dsiteprefix=/usr/local \
+  -Dsitelib="/usr/local/share/perl5" \
+  -Dsitearch="/usr/local/lib${LIBDIRSUFFIX}/perl5" \
+  -Darchlib="/usr/lib${LIBDIRSUFFIX}/perl5" \
   -Dvendorprefix=/usr \
+  -Dprivlib="/usr/share/perl5" \
+  -Dvendorlib="/usr/share/perl5/vendor_perl" \
+  -Dvendorarch="/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl" \
+  -Dscriptdir='/usr/bin' \
   -Dcccdlflags='-fPIC' \
   -Dinstallprefix=/usr \
   -Dlibpth="/usr/local/lib${LIBDIRSUFFIX} /usr/lib${LIBDIRSUFFIX} /lib${LIBDIRSUFFIX}" \
   -Doptimize="$SLKCFLAGS" \
   $USE_THREADS \
+  -Duseshrplib \
+  -Ubincompat5005 \
+  -Uversiononly \
   -Dpager='/usr/bin/less -isr' \
-  -Dinc_version_list='5.12.2 5.12.1 5.12.0 5.10.1 5.10.0 5.8.8 5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' \
   -Darchname=$ARCH-linux
 
+# -Duseshrplib creates libperl.so
+# -Ubincompat5005 helps create DSO -> libperl.so
+
 # Kludge for gcc-4.2.4's needlessly changed output:
 cat makefile | grep -v '\<command-line\>' > foo
 mv foo makefile
@@ -146,11 +157,11 @@ make install
   ln -sf c2ph pstruct
   ln -sf s2p psed
 )
-mkdir -p /usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
+#mkdir -p /usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
 
 # Install perl package:
 make install DESTDIR=$PKG
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
+#mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
 
 # Add additional modules:
 ( cd ext
@@ -237,8 +248,9 @@ mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-
 # Install documentation
 mkdir -p $PKG/usr/doc/perl-$VERSION
 cp -a \
-  AUTHORS Artistic Changes Copying INSTALL MANIFEST \
-  README README.{cn,jp,ko,tw} README.linux \
+  AUTHORS Artistic Changes Copying INSTALL \
+  README* \
+  README.{cn,jp,ko,tw} README.linux \
   $PKG/usr/doc/perl-$VERSION
 
 # We follow LSB with symlinks in /usr/share:
@@ -258,11 +270,10 @@ cp -a \
 
 chmod 755 $PKG/usr/bin/*
 chmod 644 $PKG/usr/man/man?/*
-rmdir $PKG/usr/share
 
 # This file shouldn't get clobbered:
-if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod ]; then
-  mv $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod.new
+if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod ]; then
+  mv $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod.new
 fi
 
 # Insert the slack-desc:
@@ -284,7 +295,7 @@ config() {
   fi
   # Otherwise, we leave the .new copy for the admin to consider...
 }
-config usr/lib/perl5/${VERSION}/i486-linux-thread-multi/perllocal.pod.new
+config usr/lib/perl5/perllocal.pod.new
 EOF
 
 # Build the package:
diff --git a/source/d/python/python.SlackBuild b/source/d/python/python.SlackBuild
index debd7e95..220f3f02 100755
--- a/source/d/python/python.SlackBuild
+++ b/source/d/python/python.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,11 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-2.6.6}
-BUILD=${BUILD:-1}
+PKGNAM=python
+SRCNAM=Python
+VERSION=$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+BRANCH_VERSION=$(echo $VERSION | cut -f 1,2 -d . )
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -38,7 +41,7 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-python
+PKG=$TMP/package-$PKGNAM
 rm -rf $PKG
 mkdir -p $TMP $PKG
 
@@ -57,22 +60,23 @@ elif [ "$ARCH" = "armel" ]; then
 fi
 
 # Location for Python site-packages:
-SITEPK=$PKG/usr/lib${LIBDIRSUFFIX}/python2.6/site-packages
+SITEPK=$PKG/usr/lib${LIBDIRSUFFIX}/${PKGNAM}${BRANCH_VERSION}/site-packages
 # same as above without $PKG
-TOOLSDIR=/usr/lib${LIBDIRSUFFIX}/python2.6/site-packages
+TOOLSDIR=/usr/lib${LIBDIRSUFFIX}/${PKGNAM}${BRANCH_VERSION}/site-packages
 
 cd $TMP
-rm -rf Python-$VERSION
-tar xf $CWD/Python-$VERSION.tar.?z* || exit 1
-cd Python-$VERSION
+rm -rf $SRCNAM-$VERSION
+tar xf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1
+cd $SRCNAM-$VERSION
 
 zcat $CWD/python.readline.set_pre_input_hook.diff.gz | patch -p1 --verbose || exit 1
+# We don't want a large libpython*.a:
+zcat $CWD/python.no-static-library.diff.gz | patch -p1 --verbose || exit 1
 
 if [ "$ARCH" = "x86_64" ]; then
-  # Install to lib64 instead of lib:
-  zcat $CWD/python.x86_64.diff.gz |  patch -p1 --verbose || exit 1
-  # Python must report /usr/lib64/python2.6/site-packages as python_lib_dir:
-  zcat $CWD/python.pure64.diff.gz |  patch -p1 --verbose || exit 1
+  # Install to lib64 instead of lib and 
+  # Python must report /usr/lib64/python2.7/site-packages as python_lib_dir:
+  zcat $CWD/python.x86_64.diff.gz | patch -p1 --verbose || exit 1
 fi
 
 chown -R root:root .
@@ -87,7 +91,6 @@ find . \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
   --docdir=/usr/doc/python-$VERSION \
-  --with-ncurses \
   --with-threads \
   --enable-ipv6 \
   --enable-shared \
@@ -112,7 +115,6 @@ mv $SITEPK/README $PKG/usr/doc/python-$VERSION/README.python-tools
 # Make a few useful symlinks:
 mkdir -p $PKG/usr/bin
 ( cd $PKG/usr/bin
-  ln -sf $TOOLSDIR/modulator/modulator.py modulator
   ln -sf $TOOLSDIR/pynche/pynche pynche
   ln -sf $TOOLSDIR/i18n/msgfmt.py .
   ln -sf $TOOLSDIR/i18n/pygettext.py .
@@ -126,9 +128,17 @@ tar xf $CWD/python-$VERSION-docs-text.tar.?z*
 mv python-${VERSION}-docs-text/* $PKG/usr/doc/python-$VERSION/Documentation
 chown -R root:root $PKG/usr/doc/python-$VERSION
 
+# Fix possible incorrect permissions:
+( cd $PKG
+  find . -type d -exec chmod 755 "{}" \;
+  find . -perm 640 -exec chmod 644 "{}" \;
+  find . -perm 750 -exec chmod 755 "{}" \;
+)
+
+
 ( cd $PKG/usr/bin
   rm -f python
-  ln -sf python2.6 python
+  ln -sf python${BRANCH_VERSION} python
 )
 
 ( cd $PKG
@@ -143,6 +153,12 @@ chown -R root:root $PKG/usr/doc/python-$VERSION
   for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
 )
 
+( cd $PKG/usr/man
+  if [ -r python${BRANCH_VERSION}.1.gz ] ; then
+	  ln -sf python${BRANCH_VERSION}.1.gz python.1.gz
+  fi
+)
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/d/python/python.no-static-library.diff b/source/d/python/python.no-static-library.diff
new file mode 100644
index 00000000..96209897
--- /dev/null
+++ b/source/d/python/python.no-static-library.diff
@@ -0,0 +1,49 @@
+--- ./Makefile.pre.in.orig	2012-04-09 18:07:33.000000000 -0500
++++ ./Makefile.pre.in	2012-05-09 13:38:24.913226185 -0500
+@@ -396,7 +396,7 @@
+ 
+ 
+ # Build the interpreter
+-$(BUILDPYTHON):	Modules/python.o $(LIBRARY) $(LDLIBRARY)
++$(BUILDPYTHON):	Modules/python.o $(LDLIBRARY)
+ 		$(LINKCC) $(LDFLAGS) $(LINKFORSHARED) -o $@ \
+ 			Modules/python.o \
+ 			$(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
+@@ -412,18 +412,6 @@
+ 	*) $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' ./$(BUILDPYTHON) -E $(srcdir)/setup.py build;; \
+ 	esac
+ 
+-# Build static library
+-# avoid long command lines, same as LIBRARY_OBJS
+-$(LIBRARY): $(LIBRARY_OBJS)
+-	-rm -f $@
+-	$(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o
+-	$(AR) $(ARFLAGS) $@ $(PARSER_OBJS)
+-	$(AR) $(ARFLAGS) $@ $(OBJECT_OBJS)
+-	$(AR) $(ARFLAGS) $@ $(PYTHON_OBJS)
+-	$(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
+-	$(AR) $(ARFLAGS) $@ $(MODOBJS)
+-	$(RANLIB) $@
+-
+ libpython$(VERSION).so: $(LIBRARY_OBJS)
+ 	if test $(INSTSONAME) != $(LDLIBRARY); then \
+ 		$(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
+@@ -1008,18 +996,6 @@
+ 		else	true; \
+ 		fi; \
+ 	done
+-	@if test -d $(LIBRARY); then :; else \
+-		if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
+-			if test "$(SO)" = .dll; then \
+-				$(INSTALL_DATA) $(LDLIBRARY) $(DESTDIR)$(LIBPL) ; \
+-			else \
+-				$(INSTALL_DATA) $(LIBRARY) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
+-				$(RANLIB) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
+-			fi; \
+-		else \
+-			echo Skip install of $(LIBRARY) - use make frameworkinstall; \
+-		fi; \
+-	fi
+ 	$(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c
+ 	$(INSTALL_DATA) Modules/python.o $(DESTDIR)$(LIBPL)/python.o
+ 	$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in
diff --git a/source/d/python/python.pure64.diff b/source/d/python/python.pure64.diff
deleted file mode 100644
index 7e4821af..00000000
--- a/source/d/python/python.pure64.diff
+++ /dev/null
@@ -1,30 +0,0 @@
---- ./Lib/distutils/command/install.py.orig	2010-11-27 17:21:23.000000000 -0600
-+++ ./Lib/distutils/command/install.py	2010-11-27 17:25:02.000000000 -0600
-@@ -41,14 +41,14 @@
- 
- INSTALL_SCHEMES = {
-     'unix_prefix': {
--        'purelib': '$base/lib/python$py_version_short/site-packages',
-+        'purelib': '$base/lib64/python$py_version_short/site-packages',
-         'platlib': '$platbase/lib64/python$py_version_short/site-packages',
-         'headers': '$base/include/python$py_version_short/$dist_name',
-         'scripts': '$base/bin',
-         'data'   : '$base',
-         },
-     'unix_home': {
--        'purelib': '$base/lib/python',
-+        'purelib': '$base/lib64/python',
-         'platlib': '$base/lib64/python',
-         'headers': '$base/include/python/$dist_name',
-         'scripts': '$base/bin',
---- ./Lib/distutils/sysconfig.py.orig	2010-11-27 17:21:23.000000000 -0600
-+++ ./Lib/distutils/sysconfig.py	2010-11-27 17:25:02.000000000 -0600
-@@ -122,7 +122,7 @@
-         if plat_specific or standard_lib:
-             lib = "lib64"
-         else:
--            lib = "lib"
-+            lib = "lib64"
-         libpython = os.path.join(prefix,
-                                  lib, "python" + get_python_version())
-         if standard_lib:
diff --git a/source/d/python/python.readline.set_pre_input_hook.diff b/source/d/python/python.readline.set_pre_input_hook.diff
index 8f5570c9..8af4b4be 100644
--- a/source/d/python/python.readline.set_pre_input_hook.diff
+++ b/source/d/python/python.readline.set_pre_input_hook.diff
@@ -1,5 +1,5 @@
---- ./Modules/readline.c.orig	2010-05-09 10:15:40.000000000 -0500
-+++ ./Modules/readline.c	2010-11-27 17:08:38.000000000 -0600
+--- ./Modules/readline.c.orig	2008-11-04 14:43:31.000000000 -0600
++++ ./Modules/readline.c	2009-06-09 14:23:16.000000000 -0500
 @@ -11,6 +11,9 @@
  #include <errno.h>
  #include <sys/time.h>
diff --git a/source/d/python/python.x86_64.diff b/source/d/python/python.x86_64.diff
index cb6bf258..0e7c6c45 100644
--- a/source/d/python/python.x86_64.diff
+++ b/source/d/python/python.x86_64.diff
@@ -1,11 +1,108 @@
---- ./Makefile.pre.in.orig	2010-08-01 17:05:31.000000000 -0500
-+++ ./Makefile.pre.in	2010-11-27 17:22:05.000000000 -0600
-@@ -87,11 +87,11 @@
+diff -uar Python-2.7.2.orig/Lib/distutils/command/install.py Python-2.7.2/Lib/distutils/command/install.py
+--- Python-2.7.2.orig/Lib/distutils/command/install.py	2011-06-11 18:46:24.000000000 +0300
++++ Python-2.7.2/Lib/distutils/command/install.py	2011-06-13 12:29:32.239106481 +0300
+@@ -41,15 +41,15 @@
  
- # Expanded directories
- BINDIR=		@bindir@
--LIBDIR=		@libdir@
-+LIBDIR=		$(exec_prefix)/lib64
+ INSTALL_SCHEMES = {
+     'unix_prefix': {
+-        'purelib': '$base/lib/python$py_version_short/site-packages',
+-        'platlib': '$platbase/lib/python$py_version_short/site-packages',
++        'purelib': '$base/lib64/python$py_version_short/site-packages',
++        'platlib': '$platbase/lib64/python$py_version_short/site-packages',
+         'headers': '$base/include/python$py_version_short/$dist_name',
+         'scripts': '$base/bin',
+         'data'   : '$base',
+         },
+     'unix_home': {
+-        'purelib': '$base/lib/python',
+-        'platlib': '$base/lib/python',
++        'purelib': '$base/lib64/python',
++        'platlib': '$base/lib64/python',
+         'headers': '$base/include/python/$dist_name',
+         'scripts': '$base/bin',
+         'data'   : '$base',
+diff -uar Python-2.7.2.orig/Lib/distutils/sysconfig.py Python-2.7.2/Lib/distutils/sysconfig.py
+--- Python-2.7.2.orig/Lib/distutils/sysconfig.py	2011-06-11 18:46:24.000000000 +0300
++++ Python-2.7.2/Lib/distutils/sysconfig.py	2011-06-13 12:29:32.239106481 +0300
+@@ -115,7 +115,7 @@
+ 
+     if os.name == "posix":
+         libpython = os.path.join(prefix,
+-                                 "lib", "python" + get_python_version())
++                                 "lib64", "python" + get_python_version())
+         if standard_lib:
+             return libpython
+         else:
+diff -uar Python-2.7.2.orig/Lib/site.py Python-2.7.2/Lib/site.py
+--- Python-2.7.2.orig/Lib/site.py	2011-06-11 18:46:25.000000000 +0300
++++ Python-2.7.2/Lib/site.py	2011-06-13 12:29:32.239106481 +0300
+@@ -300,13 +300,13 @@
+         if sys.platform in ('os2emx', 'riscos'):
+             sitepackages.append(os.path.join(prefix, "Lib", "site-packages"))
+         elif os.sep == '/':
+-            sitepackages.append(os.path.join(prefix, "lib",
++            sitepackages.append(os.path.join(prefix, "lib64",
+                                         "python" + sys.version[:3],
+                                         "site-packages"))
+             sitepackages.append(os.path.join(prefix, "lib", "site-python"))
+         else:
+             sitepackages.append(prefix)
+-            sitepackages.append(os.path.join(prefix, "lib", "site-packages"))
++            sitepackages.append(os.path.join(prefix, "lib64", "site-packages"))
+         if sys.platform == "darwin":
+             # for framework builds *only* we add the standard Apple
+             # locations.
+diff -uar Python-2.7.2.orig/Lib/sysconfig.py Python-2.7.2/Lib/sysconfig.py
+--- Python-2.7.2.orig/Lib/sysconfig.py	2011-06-11 18:46:25.000000000 +0300
++++ Python-2.7.2/Lib/sysconfig.py	2011-06-13 12:29:32.240106474 +0300
+@@ -7,20 +7,20 @@
+ 
+ _INSTALL_SCHEMES = {
+     'posix_prefix': {
+-        'stdlib': '{base}/lib/python{py_version_short}',
+-        'platstdlib': '{platbase}/lib/python{py_version_short}',
+-        'purelib': '{base}/lib/python{py_version_short}/site-packages',
+-        'platlib': '{platbase}/lib/python{py_version_short}/site-packages',
++        'stdlib': '{base}/lib64/python{py_version_short}',
++        'platstdlib': '{platbase}/lib64/python{py_version_short}',
++        'purelib': '{base}/lib64/python{py_version_short}/site-packages',
++        'platlib': '{platbase}/lib64/python{py_version_short}/site-packages',
+         'include': '{base}/include/python{py_version_short}',
+         'platinclude': '{platbase}/include/python{py_version_short}',
+         'scripts': '{base}/bin',
+         'data': '{base}',
+         },
+     'posix_home': {
+-        'stdlib': '{base}/lib/python',
+-        'platstdlib': '{base}/lib/python',
+-        'purelib': '{base}/lib/python',
+-        'platlib': '{base}/lib/python',
++        'stdlib': '{base}/lib64/python',
++        'platstdlib': '{base}/lib64/python',
++        'purelib': '{base}/lib64/python',
++        'platlib': '{base}/lib64/python',
+         'include': '{base}/include/python',
+         'platinclude': '{base}/include/python',
+         'scripts': '{base}/bin',
+@@ -65,10 +65,10 @@
+         'data'   : '{userbase}',
+         },
+     'posix_user': {
+-        'stdlib': '{userbase}/lib/python{py_version_short}',
+-        'platstdlib': '{userbase}/lib/python{py_version_short}',
+-        'purelib': '{userbase}/lib/python{py_version_short}/site-packages',
+-        'platlib': '{userbase}/lib/python{py_version_short}/site-packages',
++        'stdlib': '{userbase}/lib64/python{py_version_short}',
++        'platstdlib': '{userbase}/lib64/python{py_version_short}',
++        'purelib': '{userbase}/lib64/python{py_version_short}/site-packages',
++        'platlib': '{userbase}/lib64/python{py_version_short}/site-packages',
+         'include': '{userbase}/include/python{py_version_short}',
+         'scripts': '{userbase}/bin',
+         'data'   : '{userbase}',
+diff -uar Python-2.7.2.orig/Makefile.pre.in Python-2.7.2/Makefile.pre.in
+--- Python-2.7.2.orig/Makefile.pre.in	2011-06-11 18:46:26.000000000 +0300
++++ Python-2.7.2/Makefile.pre.in	2011-06-13 12:29:32.240106474 +0300
+@@ -97,7 +97,7 @@
  MANDIR=		@mandir@
  INCLUDEDIR=	@includedir@
  CONFINCLUDEDIR=	$(exec_prefix)/include
@@ -14,8 +111,9 @@
  
  # Detailed destination directories
  BINLIBDEST=	$(LIBDIR)/python$(VERSION)
---- ./Modules/getpath.c.orig	2010-07-24 05:09:36.000000000 -0500
-+++ ./Modules/getpath.c	2010-11-27 17:23:13.000000000 -0600
+diff -uar Python-2.7.2.orig/Modules/getpath.c Python-2.7.2/Modules/getpath.c
+--- Python-2.7.2.orig/Modules/getpath.c	2011-06-11 18:46:27.000000000 +0300
++++ Python-2.7.2/Modules/getpath.c	2011-06-13 12:29:32.240106474 +0300
 @@ -117,8 +117,8 @@
  #endif
  
@@ -36,7 +134,7 @@
  
  static void
  reduce(char *dir)
-@@ -524,7 +524,7 @@
+@@ -528,7 +528,7 @@
      }
      else
          strncpy(zip_path, PREFIX, MAXPATHLEN);
@@ -45,7 +143,7 @@
      bufsz = strlen(zip_path);   /* Replace "00" with version */
      zip_path[bufsz - 6] = VERSION[0];
      zip_path[bufsz - 5] = VERSION[2];
-@@ -534,7 +534,7 @@
+@@ -538,7 +538,7 @@
              fprintf(stderr,
                  "Could not find platform dependent libraries <exec_prefix>\n");
          strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
@@ -54,44 +152,25 @@
      }
      /* If we found EXEC_PREFIX do *not* reduce it!  (Yet.) */
  
---- ./Modules/Setup.dist.orig	2008-11-27 04:15:12.000000000 -0600
-+++ ./Modules/Setup.dist	2010-11-27 17:21:23.000000000 -0600
-@@ -414,7 +414,7 @@
- #DB=/usr/local/BerkeleyDB.4.0
- #DBLIBVER=4.0
- #DBINC=$(DB)/include
--#DBLIB=$(DB)/lib
-+#DBLIB=$(DB)/lib64
- #_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
- 
- # Historical Berkeley DB 1.85
-@@ -460,7 +460,7 @@
- # Andrew Kuchling's zlib module.
- # This require zlib 1.1.3 (or later).
- # See http://www.gzip.org/zlib/
--#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
-+#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib64 -lz
- 
- # Interface to the Expat XML parser
- #
---- ./setup.py.orig	2010-07-17 07:31:09.000000000 -0500
-+++ ./setup.py	2010-11-27 17:21:23.000000000 -0600
-@@ -356,7 +356,7 @@
+diff -uar Python-2.7.2.orig/setup.py Python-2.7.2/setup.py
+--- Python-2.7.2.orig/setup.py	2011-06-11 18:46:28.000000000 +0300
++++ Python-2.7.2/setup.py	2011-06-13 12:29:32.241106466 +0300
+@@ -369,7 +369,7 @@
  
      def detect_modules(self):
          # Ensure that /usr/local is always used
 -        add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')
 +        add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib64')
          add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')
+         self.add_multiarch_paths()
  
-         # Add paths specified in the environment variables LDFLAGS and
-@@ -662,11 +662,11 @@
+@@ -677,11 +677,11 @@
              elif curses_library:
                  readline_libs.append(curses_library)
              elif self.compiler.find_library_file(lib_dirs +
--                                               ['/usr/lib/termcap'],
-+                                               ['/usr/lib64/termcap'],
-                                                'termcap'):
+-                                                     ['/usr/lib/termcap'],
++                                                     ['/usr/lib64/termcap'],
+                                                      'termcap'):
                  readline_libs.append('termcap')
              exts.append( Extension('readline', ['readline.c'],
 -                                   library_dirs=['/usr/lib/termcap'],
@@ -99,7 +178,7 @@
                                     extra_link_args=readline_extra_link_args,
                                     libraries=readline_libs) )
          else:
-@@ -703,8 +703,8 @@
+@@ -715,8 +715,8 @@
              if krb5_h:
                  ssl_incs += krb5_h
          ssl_libs = find_library_file(self.compiler, 'ssl',lib_dirs,
@@ -110,57 +189,3 @@
                                       ] )
  
          if (ssl_incs is not None and
---- ./Lib/distutils/command/install.py.orig	2008-05-06 17:41:46.000000000 -0500
-+++ ./Lib/distutils/command/install.py	2010-11-27 17:21:23.000000000 -0600
-@@ -42,14 +42,14 @@
- INSTALL_SCHEMES = {
-     'unix_prefix': {
-         'purelib': '$base/lib/python$py_version_short/site-packages',
--        'platlib': '$platbase/lib/python$py_version_short/site-packages',
-+        'platlib': '$platbase/lib64/python$py_version_short/site-packages',
-         'headers': '$base/include/python$py_version_short/$dist_name',
-         'scripts': '$base/bin',
-         'data'   : '$base',
-         },
-     'unix_home': {
-         'purelib': '$base/lib/python',
--        'platlib': '$base/lib/python',
-+        'platlib': '$base/lib64/python',
-         'headers': '$base/include/python/$dist_name',
-         'scripts': '$base/bin',
-         'data'   : '$base',
---- ./Lib/distutils/sysconfig.py.orig	2010-08-03 16:18:06.000000000 -0500
-+++ ./Lib/distutils/sysconfig.py	2010-11-27 17:21:23.000000000 -0600
-@@ -119,8 +119,12 @@
-         prefix = plat_specific and EXEC_PREFIX or PREFIX
- 
-     if os.name == "posix":
-+        if plat_specific or standard_lib:
-+            lib = "lib64"
-+        else:
-+            lib = "lib"
-         libpython = os.path.join(prefix,
--                                 "lib", "python" + get_python_version())
-+                                 lib, "python" + get_python_version())
-         if standard_lib:
-             return libpython
-         else:
---- ./Lib/site.py.orig	2010-03-21 09:02:32.000000000 -0500
-+++ ./Lib/site.py	2010-11-27 17:21:23.000000000 -0600
-@@ -265,12 +265,16 @@
-         if sys.platform in ('os2emx', 'riscos'):
-             sitedirs.append(os.path.join(prefix, "Lib", "site-packages"))
-         elif os.sep == '/':
-+            sitedirs.append(os.path.join(prefix, "lib64",
-+                                        "python" + sys.version[:3],
-+                                        "site-packages"))
-             sitedirs.append(os.path.join(prefix, "lib",
-                                         "python" + sys.version[:3],
-                                         "site-packages"))
-             sitedirs.append(os.path.join(prefix, "lib", "site-python"))
-         else:
-             sitedirs.append(prefix)
-+            sitedirs.append(os.path.join(prefix, "lib64", "site-packages"))
-             sitedirs.append(os.path.join(prefix, "lib", "site-packages"))
- 
-         if sys.platform == "darwin":
diff --git a/source/d/ruby/ruby.SlackBuild b/source/d/ruby/ruby.SlackBuild
index c9a25654..3c856604 100755
--- a/source/d/ruby/ruby.SlackBuild
+++ b/source/d/ruby/ruby.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=ruby
 VERSION=$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1,2 -d - | rev)
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -87,26 +87,12 @@ optflags=$OPTFLAGS \
   --docdir=/usr/doc/ruby-$VERSION \
   --enable-shared \
   --enable-pthread \
-  --enable-install-doc \
+  --disable-install-doc \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# This symlink is needed by things that include ruby/config.h.
-( cd $PKG/usr/include/
-  if [ ! -e ruby -a -d ruby-*/*-*/ruby ]; then
-    ln -s ruby-*/*-*/ruby .
-  fi
-)
-
-# These include files are no longer installed as of ruby-1.9.1, but
-# kdebindings will not compile without them.  Try to remove these
-# from the package later if the situation changes.
-mkdir -p $PKG/usr/include/ruby-$(echo $VERSION | cut -f 1 -d -)/ruby
-cp -a node.h version.h revision.h \
-  $PKG/usr/include/ruby-$(echo $VERSION | cut -f 1 -d -)/ruby
-
 mkdir -p $PKG/usr/doc/ruby-$VERSION
 cp -a \
   COPYING* *GPL* ChangeLog LEGAL NEWS README* ToDo \
diff --git a/source/d/slacktrack/slacktrack.SlackBuild b/source/d/slacktrack/slacktrack.SlackBuild
index 50d52ca0..3b62823a 100755
--- a/source/d/slacktrack/slacktrack.SlackBuild
+++ b/source/d/slacktrack/slacktrack.SlackBuild
@@ -5,15 +5,15 @@ if [ "$TMP" = "" ]; then
   TMP=/tmp
 fi
 
-export VERSION=2.08
+export VERSION=2.12
 
 if [ ! -d $TMP ]; then
   mkdir -p $TMP # location to build the source
 fi
 cd $TMP
-rm -rf slacktrack
+rm -rf slacktrack-project
 tar xvf $CWD/slacktrack-$VERSION-source.tar.xz
-cd slacktrack || exit 1
+cd slacktrack-project || exit 1
 
 # Start the "real" SlackBuild:
 ./slacktrack.SlackBuild
diff --git a/source/d/subversion/get-svn-book.sh b/source/d/subversion/get-svn-book.sh
index 112ba17c..e88530d3 100755
--- a/source/d/subversion/get-svn-book.sh
+++ b/source/d/subversion/get-svn-book.sh
@@ -3,7 +3,7 @@ CWD=`pwd`
 
 # Add the latest copy of the Subversion book:
 ( cd $CWD
-  lftpget http://svnbook.red-bean.com/nightly/en/svn-book-html.tar.bz2
+  lftpget http://svnbook.red-bean.com/en/1.7/svn-book-html.tar.bz2
   chmod 644 svn-book-html.tar.bz2
 )
 
diff --git a/source/d/subversion/subversion.SlackBuild b/source/d/subversion/subversion.SlackBuild
index 27f52fd8..114b1197 100755
--- a/source/d/subversion/subversion.SlackBuild
+++ b/source/d/subversion/subversion.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -79,16 +79,20 @@ CFLAGS="$SLKCFLAGS" \
   --disable-static \
   --with-apr=/usr \
   --with-apr-util=/usr \
-  --with-apxs=/usr/sbin/apxs \
+  --with-apxs=/usr/bin/apxs \
   --with-neon=/usr \
   --with-zlib=/usr \
   --with-pic \
   --with-ssl \
-  --with-kwallet \
   --build=$ARCH-slackware-linux
 
+# Not currently compiling with gcc-4.7.1, but we'll try it again later:
+#  --with-kwallet \
+#
+
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
+make install-tools DESTDIR=$PKG || exit 1
 make install-docs DESTDIR=$PKG || exit 1
 
 # Install python bindings
diff --git a/source/d/swig/swig.SlackBuild b/source/d/swig/swig.SlackBuild
index aa4ea374..b786073f 100755
--- a/source/d/swig/swig.SlackBuild
+++ b/source/d/swig/swig.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=swig
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -55,7 +55,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf swig-$VERSION
-tar xvf $CWD/swig-$VERSION.tar.bz2
+tar xvf $CWD/swig-$VERSION.tar.?z* || exit 1
 cd swig-$VERSION
 chown -R root:root .
 find . \
@@ -72,10 +72,10 @@ CXXFLAGS="$SLKCFLAGS" \
   --exec-prefix=/usr \
   --sysconfdir=/etc \
   --localstatedir=/var \
-  --build=$ARCH-slackware-linux
+  --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG
+make install DESTDIR=$PKG || exit 1
 
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
diff --git a/source/d/yasm/yasm.SlackBuild b/source/d/yasm/yasm.SlackBuild
index b178fdb4..e98878da 100755
--- a/source/d/yasm/yasm.SlackBuild
+++ b/source/d/yasm/yasm.SlackBuild
@@ -47,8 +47,8 @@
 # -----------------------------------------------------------------------------
 
 PKGNAM=yasm
-VERSION=${VERSION:-1.1.0}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-1.2.0}
+BUILD=${BUILD:-2}
 TAG=${TAG:-}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/e/emacs/emacs.SlackBuild b/source/e/emacs/emacs.SlackBuild
index 8040b006..7aa4d9db 100755
--- a/source/e/emacs/emacs.SlackBuild
+++ b/source/e/emacs/emacs.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,17 +27,25 @@
 # Modified by Patrick Volkerding <volkerdi@slackware.com>
 
 PKGNAM=emacs
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
+# Determine version number the tarball is labeled with:
+TARBALLVER=${TARBALLVER:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+# OK, now what's being used as the source directory version number...  account
+# for subversions a, b, c, and d in the $TARBALLVER:
+SRCDIRVER=$(echo $TARBALLVER | tr -d a | tr -d b | tr -d c | tr -d d)
+# I guess this is the main "version"...  we don't use this variable anywhere below, but
+# defining it is traditional:
+VERSION=$SRCDIRVER
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
 if [ "$ARCH" = "i486" ]; then
@@ -48,6 +56,10 @@ elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+else
+  SLKCFLAGS="-O2"
 fi
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -59,9 +71,10 @@ PKG=$TMP/package-$PKGNAM
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
+rm -rf $PKGNAM-$TARBALLVER
+tar xvf $CWD/$PKGNAM-$TARBALLVER.tar.?z* || exit 1
+cd $PKGNAM-$SRCDIRVER || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -79,8 +92,8 @@ CXXFLAGS="$SLKCFLAGS" \
   --program-suffix="" \
   --mandir=/usr/man \
   --infodir=/usr/info \
-  --enable-static=no \
-  --enable-shared=yes \
+  --without-gconf \
+  --without-gsettings \
   --with-x \
   --with-x-toolkit=gtk \
   --build=${ARCH}-slackware-linux
@@ -90,15 +103,16 @@ make install DESTDIR=$PKG || exit 1
 
 ( cd $PKG/usr/bin
   rm emacs
-  mv emacs-${VERSION} emacs-${VERSION}-with-x11
-  ln -sf emacs-${VERSION}-with-x11 emacs
+  mv emacs-${SRCDIRVER} emacs-${TARBALLVER}-with-x11
+  ln -sf emacs-${TARBALLVER}-with-x11 emacs
 )
 
 # Also add a version of the binary that is not linked to X11:
 cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
+rm -rf $PKGNAM-$TARBALLVER
+tar xvf $CWD/$PKGNAM-$TARBALLVER.tar.?z* || exit 1
+cd $PKGNAM-$SRCDIRVER || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -116,17 +130,17 @@ CXXFLAGS="$SLKCFLAGS" \
   --program-suffix="" \
   --mandir=/usr/man \
   --infodir=/usr/info \
-  --enable-static=no \
-  --enable-shared=yes \
+  --without-gconf \
+  --without-gsettings \
   --with-x=no \
   --build=${ARCH}-slackware-linux
 
 make $NUMJOBS || make || exit 1
 
 # Install the non-x version:
-cat src/emacs > $PKG/usr/bin/emacs-${VERSION}-no-x11
-chown root:root $PKG/usr/bin/emacs-${VERSION}-no-x11
-chmod 1755 $PKG/usr/bin/emacs-${VERSION}-no-x11
+cat src/emacs > $PKG/usr/bin/emacs-${TARBALLVER}-no-x11
+chown root:root $PKG/usr/bin/emacs-${TARBALLVER}-no-x11
+chmod 1755 $PKG/usr/bin/emacs-${TARBALLVER}-no-x11
 
 # I don't care for broken permissions.
 chmod 755 $PKG/var/games/emacs
@@ -149,15 +163,15 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \
   gzip -9 *
 )
 
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$TARBALLVER
 cp -a \
   AUTHORS COPYING* INSTALL README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$TARBALLVER
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
 if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$TARBALLVER)
   cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
   touch -r ChangeLog $DOCSDIR/ChangeLog
 fi
@@ -167,5 +181,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$TARBALLVER-$ARCH-$BUILD.txz
 
diff --git a/source/installer/busybox-1.19.4.tar.bz2.sign b/source/installer/busybox-1.19.4.tar.bz2.sign
new file mode 100644
index 00000000..39615406
--- /dev/null
+++ b/source/installer/busybox-1.19.4.tar.bz2.sign
@@ -0,0 +1,18 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+busybox-1.19.4.tar.bz2 released Sat, 04 Feb 2012 20:36:04 +0100
+
+MD5:  9c0cae5a0379228e7b55e5b29528df8e  busybox-1.19.4.tar.bz2
+SHA1: 5d7db83d8efbadc19c86ec236e673504bbf43517  busybox-1.19.4.tar.bz2
+
+To verify this signature, you can obtain my public key
+from http://busybox.net/~vda/vda_pubkey.gpg
+
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.6 (GNU/Linux)
+
+iD8DBQFPLYisR7cMVazJllsRAlJcAJ9qzRJHdS3BTxltS8uXQjkY85kvnQCgxqD2
+UoFLhO99cgfJpTNM0/2S8PA=
+=+tRO
+-----END PGP SIGNATURE-----
diff --git a/source/installer/busybox-dot-config b/source/installer/busybox-dot-config
index cad9b5db..eef8ea26 100644
--- a/source/installer/busybox-dot-config
+++ b/source/installer/busybox-dot-config
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.18.4
-# Mon Apr 11 19:18:17 2011
+# Busybox version: 1.19.4
+# Sat Apr  7 11:51:30 2012
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -39,8 +39,8 @@ CONFIG_LAST_SUPPORTED_WCHAR=767
 CONFIG_LONG_OPTS=y
 CONFIG_FEATURE_DEVPTS=y
 # CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_WTMP=y
 CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
 CONFIG_FEATURE_PIDFILE=y
 CONFIG_FEATURE_SUID=y
 CONFIG_FEATURE_SUID_CONFIG=y
@@ -89,6 +89,8 @@ CONFIG_PREFIX="./_install"
 #
 # Busybox Library Tuning
 #
+# CONFIG_FEATURE_SYSTEMD is not set
+CONFIG_FEATURE_RTMINMAX=y
 CONFIG_PASSWORD_MINLEN=6
 CONFIG_MD5_SIZE_VS_SPEED=2
 # CONFIG_FEATURE_FAST_TOP is not set
@@ -99,6 +101,7 @@ CONFIG_FEATURE_EDITING_MAX_LEN=1024
 CONFIG_FEATURE_EDITING_VI=y
 CONFIG_FEATURE_EDITING_HISTORY=64
 # CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+# CONFIG_FEATURE_REVERSE_SEARCH is not set
 CONFIG_FEATURE_TAB_COMPLETION=y
 # CONFIG_FEATURE_USERNAME_COMPLETION is not set
 CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
@@ -106,6 +109,7 @@ CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
 CONFIG_FEATURE_NON_POSIX_CP=y
 CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
 CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_FEATURE_SKIP_ROOTFS=y
 CONFIG_MONOTONIC_SYSCALL=y
 CONFIG_IOCTL_HEX2STR_ERROR=y
 # CONFIG_FEATURE_HWIB is not set
@@ -169,12 +173,17 @@ CONFIG_CAT=y
 # CONFIG_FEATURE_DATE_ISOFMT is not set
 # CONFIG_FEATURE_DATE_NANO is not set
 # CONFIG_FEATURE_DATE_COMPAT is not set
+CONFIG_ID=y
+CONFIG_GROUPS=y
 CONFIG_TEST=y
 CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
 CONFIG_BASE64=y
+CONFIG_WHO=y
+CONFIG_USERS=y
 CONFIG_CAL=y
 CONFIG_CATV=y
 CONFIG_CHGRP=y
@@ -212,10 +221,8 @@ CONFIG_FSYNC=y
 CONFIG_HEAD=y
 CONFIG_FEATURE_FANCY_HEAD=y
 # CONFIG_HOSTID is not set
-CONFIG_ID=y
 CONFIG_INSTALL=y
 CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
 CONFIG_LN=y
 CONFIG_LOGNAME=y
 # CONFIG_LS is not set
@@ -267,7 +274,6 @@ CONFIG_TAIL=y
 CONFIG_FEATURE_FANCY_TAIL=y
 # CONFIG_TEE is not set
 # CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set
-CONFIG_TOUCH=y
 CONFIG_TRUE=y
 CONFIG_TTY=y
 CONFIG_UNAME=y
@@ -279,7 +285,6 @@ CONFIG_UNIQ=y
 # CONFIG_UUENCODE is not set
 CONFIG_WC=y
 CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
 CONFIG_WHOAMI=y
 CONFIG_YES=y
 
@@ -350,20 +355,13 @@ CONFIG_WHICH=y
 # Editors
 #
 # CONFIG_PATCH is not set
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_LIBM=y
-# CONFIG_CMP is not set
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_LONG_OPTIONS=y
-CONFIG_FEATURE_DIFF_DIR=y
-# CONFIG_ED is not set
-# CONFIG_SED is not set
 CONFIG_VI=y
 CONFIG_FEATURE_VI_MAX_LEN=1024
 CONFIG_FEATURE_VI_8BIT=y
 CONFIG_FEATURE_VI_COLON=y
 CONFIG_FEATURE_VI_YANKMARK=y
 CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_REGEX_SEARCH=y
 CONFIG_FEATURE_VI_USE_SIGNALS=y
 CONFIG_FEATURE_VI_DOT_CMD=y
 CONFIG_FEATURE_VI_READONLY=y
@@ -372,6 +370,14 @@ CONFIG_FEATURE_VI_SET=y
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
 CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_LIBM=y
+# CONFIG_CMP is not set
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_LONG_OPTIONS=y
+CONFIG_FEATURE_DIFF_DIR=y
+# CONFIG_ED is not set
+# CONFIG_SED is not set
 # CONFIG_FEATURE_ALLOW_EXEC is not set
 
 #
@@ -430,6 +436,7 @@ CONFIG_FEATURE_EXTRA_QUIET=y
 # CONFIG_FEATURE_INITRD is not set
 CONFIG_INIT_TERMINAL_TYPE="linux"
 CONFIG_MESG=y
+CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP=y
 
 #
 # Login/Password Management Utilities
@@ -515,6 +522,7 @@ CONFIG_BLOCKDEV=y
 # CONFIG_ACPID is not set
 # CONFIG_FEATURE_ACPID_COMPAT is not set
 # CONFIG_BLKID is not set
+# CONFIG_FEATURE_BLKID_TYPE is not set
 CONFIG_DMESG=y
 CONFIG_FEATURE_DMESG_PRETTY=y
 CONFIG_FBSET=y
@@ -523,7 +531,7 @@ CONFIG_FEATURE_FBSET_READMODE=y
 CONFIG_FDFLUSH=y
 CONFIG_FDFORMAT=y
 # CONFIG_FDISK is not set
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
 # CONFIG_FEATURE_FDISK_WRITABLE is not set
 # CONFIG_FEATURE_AIX_LABEL is not set
 # CONFIG_FEATURE_SGI_LABEL is not set
@@ -610,10 +618,25 @@ CONFIG_SWITCH_ROOT=y
 # Miscellaneous Utilities
 #
 # CONFIG_CONSPY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+# CONFIG_FEATURE_LESS_WINCH is not set
+# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set
+# CONFIG_FEATURE_LESS_DASHCMD is not set
+# CONFIG_FEATURE_LESS_LINENUMS is not set
 # CONFIG_NANDWRITE is not set
 # CONFIG_NANDDUMP is not set
+CONFIG_SETSERIAL=y
 # CONFIG_UBIATTACH is not set
 # CONFIG_UBIDETACH is not set
+CONFIG_UBIMKVOL=y
+CONFIG_UBIRMVOL=y
+CONFIG_UBIRSVOL=y
+CONFIG_UBIUPDATEVOL=y
 # CONFIG_ADJTIMEX is not set
 CONFIG_BBCONFIG=y
 CONFIG_FEATURE_COMPRESS_BBCONFIG=y
@@ -654,15 +677,6 @@ CONFIG_IONICE=y
 # CONFIG_LAST is not set
 # CONFIG_FEATURE_LAST_SMALL is not set
 # CONFIG_FEATURE_LAST_FANCY is not set
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-# CONFIG_FEATURE_LESS_WINCH is not set
-# CONFIG_FEATURE_LESS_DASHCMD is not set
-# CONFIG_FEATURE_LESS_LINENUMS is not set
 # CONFIG_HDPARM is not set
 # CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set
 # CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
@@ -696,11 +710,17 @@ CONFIG_WALL=y
 #
 # Networking Utilities
 #
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
 CONFIG_NBDCLIENT=y
 CONFIG_NC=y
 CONFIG_NC_SERVER=y
 CONFIG_NC_EXTRA=y
 # CONFIG_NC_110_COMPAT is not set
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_WHOIS=y
 CONFIG_FEATURE_IPV6=y
 # CONFIG_FEATURE_UNIX_LOCAL is not set
 CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
@@ -773,17 +793,12 @@ CONFIG_IPRULE=y
 CONFIG_IPCALC=y
 CONFIG_FEATURE_IPCALC_FANCY=y
 CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
-CONFIG_NAMEIF=y
-# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
 CONFIG_NETSTAT=y
 # CONFIG_FEATURE_NETSTAT_WIDE is not set
 CONFIG_FEATURE_NETSTAT_PRG=y
 CONFIG_NSLOOKUP=y
 # CONFIG_NTPD is not set
 # CONFIG_FEATURE_NTPD_SERVER is not set
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_FEATURE_FANCY_PING=y
 CONFIG_PSCAN=y
 CONFIG_ROUTE=y
 CONFIG_SLATTACH=y
@@ -816,12 +831,14 @@ CONFIG_TRACEROUTE6=y
 # CONFIG_DHCPRELAY is not set
 # CONFIG_DUMPLEASES is not set
 # CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
 CONFIG_DHCPD_LEASES_FILE=""
 # CONFIG_UDHCPC is not set
 # CONFIG_FEATURE_UDHCPC_ARPING is not set
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=0
 # CONFIG_FEATURE_UDHCP_RFC3397 is not set
+# CONFIG_FEATURE_UDHCP_8021Q is not set
 CONFIG_UDHCPC_DEFAULT_SCRIPT=""
 CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
 CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
@@ -857,15 +874,19 @@ CONFIG_FEATURE_MIME_CHARSET=""
 #
 CONFIG_IOSTAT=y
 CONFIG_MPSTAT=y
+CONFIG_NMETER=y
 CONFIG_PMAP=y
 CONFIG_POWERTOP=y
+CONFIG_PSTREE=y
+CONFIG_PWDX=y
 # CONFIG_SMEMCAP is not set
+CONFIG_UPTIME=y
+CONFIG_FEATURE_UPTIME_UTMP_SUPPORT=y
 CONFIG_FREE=y
 CONFIG_FUSER=y
 CONFIG_KILL=y
 CONFIG_KILLALL=y
 CONFIG_KILLALL5=y
-CONFIG_NMETER=y
 CONFIG_PGREP=y
 CONFIG_PIDOF=y
 CONFIG_FEATURE_PIDOF_SINGLE=y
@@ -886,7 +907,6 @@ CONFIG_FEATURE_TOP_DECIMALS=y
 # CONFIG_FEATURE_TOP_SMP_PROCESS is not set
 CONFIG_FEATURE_TOPMEM=y
 CONFIG_FEATURE_SHOW_THREADS=y
-CONFIG_UPTIME=y
 CONFIG_WATCH=y
 
 #
@@ -922,19 +942,20 @@ CONFIG_SV_DEFAULT_SERVICE_DIR=""
 #
 # Shells
 #
-CONFIG_ASH=y
-CONFIG_ASH_BASH_COMPAT=y
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_PRINTF=y
-CONFIG_ASH_BUILTIN_TEST=y
-CONFIG_ASH_CMDCMD=y
-CONFIG_ASH_MAIL=y
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_ASH is not set
+# CONFIG_ASH_BASH_COMPAT is not set
+# CONFIG_ASH_IDLE_TIMEOUT is not set
+# CONFIG_ASH_JOB_CONTROL is not set
+# CONFIG_ASH_ALIAS is not set
+# CONFIG_ASH_GETOPTS is not set
+# CONFIG_ASH_BUILTIN_ECHO is not set
+# CONFIG_ASH_BUILTIN_PRINTF is not set
+# CONFIG_ASH_BUILTIN_TEST is not set
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+# CONFIG_ASH_EXPAND_PRMT is not set
 CONFIG_CTTYHACK=y
 # CONFIG_HUSH is not set
 # CONFIG_HUSH_BASH_COMPAT is not set
@@ -953,17 +974,18 @@ CONFIG_CTTYHACK=y
 # CONFIG_HUSH_EXPORT_N is not set
 # CONFIG_HUSH_MODE_X is not set
 # CONFIG_MSH is not set
-CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_ASH is not set
 # CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_FEATURE_SH_IS_NONE=y
 # CONFIG_FEATURE_BASH_IS_ASH is not set
 # CONFIG_FEATURE_BASH_IS_HUSH is not set
 CONFIG_FEATURE_BASH_IS_NONE=y
-CONFIG_SH_MATH_SUPPORT=y
+# CONFIG_SH_MATH_SUPPORT is not set
 # CONFIG_SH_MATH_SUPPORT_64 is not set
-CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
 # CONFIG_FEATURE_SH_STANDALONE is not set
 # CONFIG_FEATURE_SH_NOFORK is not set
+# CONFIG_FEATURE_SH_HISTFILESIZE is not set
 
 #
 # System Logging Utilities
@@ -972,6 +994,7 @@ CONFIG_SYSLOGD=y
 CONFIG_FEATURE_ROTATE_LOGFILE=y
 CONFIG_FEATURE_REMOTE_LOG=y
 # CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_SYSLOGD_CFG=y
 CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
 CONFIG_FEATURE_IPC_SYSLOG=y
 CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
diff --git a/source/installer/busybox.SlackBuild b/source/installer/busybox.SlackBuild
index 4283c4d4..3bafdcde 100755
--- a/source/installer/busybox.SlackBuild
+++ b/source/installer/busybox.SlackBuild
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2007, 2009, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 
 
 PKGNAM=busybox
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -41,11 +41,14 @@ fi
 
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
 zcat $CWD/busybox.2.6.32.2.diff.gz | patch -p1 || exit 1
 
+# Fix broken wget -P option:
+zcat $CWD/busybox.wget.P.diff.gz | patch -p1 --verbose || exit 1
+
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . -perm 666 -exec chmod 644 {} \;
diff --git a/source/installer/busybox.wget.P.diff b/source/installer/busybox.wget.P.diff
new file mode 100644
index 00000000..99219d46
--- /dev/null
+++ b/source/installer/busybox.wget.P.diff
@@ -0,0 +1,31 @@
+From aacd44860129372e5d4ff1494664317f18cbb615 Mon Sep 17 00:00:00 2001
+From: Denys Vlasenko <vda.linux@googlemail.com>
+Date: Sun, 17 Jun 2012 18:21:30 +0000
+Subject: wget: fix wget-supports--P testsuite failure. Closes 4940
+
+Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
+---
+diff --git a/networking/wget.c b/networking/wget.c
+index 5d58450..6d8f8a5 100644
+--- a/networking/wget.c
++++ b/networking/wget.c
+@@ -621,13 +621,11 @@ static void download_one_url(const char *url)
+ 		if (G.fname_out[0] == '/' || !G.fname_out[0])
+ 			G.fname_out = (char*)"index.html";
+ 		/* -P DIR is considered only if there was no -O FILE */
++		if (G.dir_prefix)
++			G.fname_out = fname_out_alloc = concat_path_file(G.dir_prefix, G.fname_out);
+ 		else {
+-			if (G.dir_prefix)
+-				G.fname_out = fname_out_alloc = concat_path_file(G.dir_prefix, G.fname_out);
+-			else {
+-				/* redirects may free target.path later, need to make a copy */
+-				G.fname_out = fname_out_alloc = xstrdup(G.fname_out);
+-			}
++			/* redirects may free target.path later, need to make a copy */
++			G.fname_out = fname_out_alloc = xstrdup(G.fname_out);
+ 		}
+ 	}
+ #if ENABLE_FEATURE_WGET_STATUSBAR
+--
+cgit v0.9.0.1-2-gef13
diff --git a/source/k/README.TXT b/source/k/README.TXT
index 8432d585..b9489649 100644
--- a/source/k/README.TXT
+++ b/source/k/README.TXT
@@ -13,7 +13,7 @@ For a 2.6.x kernel (much easier):
    Install a suitable .config, or use make menuconfig, etc.
 
    An example would be to use one of the config files here:
-   # cat config-generic-2.6.37.6 > /usr/src/linux-2.6.37.6/.config
+   # cat config-generic-3.2.29 > /usr/src/linux-3.2.29/.config
 
    Then run the build programs:
 
diff --git a/source/k/README_SPEAKUP_PATCH.TXT b/source/k/README_SPEAKUP_PATCH.TXT
deleted file mode 100644
index 505f5852..00000000
--- a/source/k/README_SPEAKUP_PATCH.TXT
+++ /dev/null
@@ -1,86 +0,0 @@
-
-Now that Speakup is included in the mainline kernel it has been built
-into the huge kernel and added as modules to the generic kernel, so there
-is no longer a need to use a special kernel for Speakup.
-
-This is an archive of the speakup project's GIT HEAD snapped on the given
-day, and was used to build the speakup.s kernel.  Grabbing Speakup's GIT
-repo (if you want the very latest) is done like this, by the way:
-
-git clone http://www.linux-speakup.org/speakup.git
-
-Then use "./makedist" to make the speakup-3.1.6.tar.bz2 tarball.
-
-To build the same kernel as Slackware included as speakup.s, you'll
-need to do this:
-
-Untar the speakup archive, and cd into the speakup directory:
-
-tar xf speakup-3.1.6.tar.bz2
-cd speakup-3.1.6
-
-Patch whatever kernel you happen to want to compile:
-./install /usr/src/linux-2.6.35.11
-
-Change to the kernel directory:
-cd /usr/src/linux-2.6.35.11
-
-If you want to start with the defaults one of Slackware's kernels, you can do
-that like this:
-
-cat /boot/vmlinuz-huge-2.6.35.11 > .config
-
-Or, better yet, if you have access to the Slackware tree use the
-Speakup .config that was used:
-
-cat (slacktree)/kernels/speakup.s/config > .config
-
-Then do any additional configuation to the kernel that you may require:
-
-make menuconfig
-
-You might want to check in Device Drivers -> Accessibility -> Speakup
-to make sure that Speakup support is configured to your liking.
-
-After that, it's build and install:
-make
-make modules_install
-make bzImage
-cat arch/x86/boot/bzImage > /boot/vmlinuz-huge-2.6.35.11-speakup
-
-I put the -speakup on the end of the kernel name so that I can remember
-which kernel I've patched, but that part is entirely optional.
-
-The next step will be to edit add the new kernel's modules to an initrd if
-you use one (if you didn't build in the root filesystem or something like
-that you will need an initrd).  See "man mkinitrd" for more details on the
-subject of making an initrd.
-
-Now just add the new kernel (and possibly the /boot/initrd.gz) to
-/etc/lilo.conf, run lilo as root, and you are ready to reboot.  Make sure
-to use an append="speakup parameters" type line in /etc/lilo.conf to
-configure speakup to use the proper synth driver.  You many also need to
-specify the serial port or other parameters, like this:
-
-append="speakup.synth=dectlk speakup.ser=2"
-
-This line would attempt to use Speakup with a DecTalk Express on /dev/ttyS1.
-
-Note that with Speakup 3.x, the kernel parameter names have changed to
-contain dots rather than underscores.  Other options have changed as
-well.  Although perhaps not a complete list, I found these changes noted
-on the linuxfromscratch web site:
-
-speakup_synth became speakup.synth, and the "sftsyn" synthesizer became "soft";
-
-speakup_ser became speakup.ser, and serial ports are now numbered starting from 1,
-not from 0 (i.e., speakup_ser=1 became speakup.ser=2);
-
-speakup_quiet became speakup.quiet, valid values are 0 and 1;
-
-speakup_port became speakup.port.
-
-Good luck!  :-)
-
-Pat
-
diff --git a/source/k/config-generic-2.6.37.6 b/source/k/config-generic-2.6.37.6
deleted file mode 100644
index a3b550b6..00000000
--- a/source/k/config-generic-2.6.37.6
+++ /dev/null
@@ -1,5066 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.37.6 Kernel Configuration
-# Sat Apr  9 12:54:40 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_HARDIRQS_SW_RESEND is not set
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_RPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_HPSA=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_3W_SAS=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=m
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_ARCMSR=m
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_BUSLOGIC=m
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=m
-CONFIG_LIBFCOE=m
-CONFIG_FCOE=m
-CONFIG_FCOE_FNIC=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=m
-CONFIG_SCSI_PM8001=m
-CONFIG_SCSI_SRP=m
-CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=y
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=m
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF_DEPENDS=y
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI_PCI=y
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT30XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX=m
-CONFIG_WL1271=m
-CONFIG_WL1271_SDIO=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_QT602240=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WINBOND_CIR=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_IR_CORE=m
-CONFIG_VIDEO_IR=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-# CONFIG_DVB_FIREDTV_IEEE1394 is not set
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-# CONFIG_FB_HGA_ACCEL is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_HIFIER=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EGALAX=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_XHCI_HCD=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_STRADIS=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
-# CONFIG_BRCMFMAC is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_AUTOFS_FS=m
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-CONFIG_FB_UDL=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_IIO is not set
-CONFIG_ZRAM=m
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_I2C=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_ITE8709=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_EASYCAP=m
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=m
-CONFIG_SPEAKUP_SYNTH_ACNTSA=m
-CONFIG_SPEAKUP_SYNTH_ACNTPC=m
-CONFIG_SPEAKUP_SYNTH_APOLLO=m
-CONFIG_SPEAKUP_SYNTH_AUDPTR=m
-CONFIG_SPEAKUP_SYNTH_BNS=m
-CONFIG_SPEAKUP_SYNTH_DECTLK=m
-CONFIG_SPEAKUP_SYNTH_DECEXT=m
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=m
-CONFIG_SPEAKUP_SYNTH_KEYPC=m
-CONFIG_SPEAKUP_SYNTH_LTLK=m
-CONFIG_SPEAKUP_SYNTH_SOFT=m
-CONFIG_SPEAKUP_SYNTH_SPKOUT=m
-CONFIG_SPEAKUP_SYNTH_TXPRT=m
-CONFIG_SPEAKUP_SYNTH_DUMMY=m
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_EXPORTFS=m
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-CONFIG_BKL=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
diff --git a/source/k/config-huge-2.6.37.6 b/source/k/config-huge-2.6.37.6
deleted file mode 100644
index 08570cc5..00000000
--- a/source/k/config-huge-2.6.37.6
+++ /dev/null
@@ -1,5065 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.37.6 Kernel Configuration
-# Sat Apr  9 22:43:20 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_HARDIRQS_SW_RESEND is not set
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_RPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=y
-CONFIG_BLK_CPQ_CISS_DA=y
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=y
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=y
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_HPSA=y
-CONFIG_SCSI_3W_9XXX=y
-CONFIG_SCSI_3W_SAS=y
-CONFIG_SCSI_ACARD=y
-CONFIG_SCSI_AACRAID=y
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=y
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=y
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=y
-CONFIG_SCSI_ARCMSR=y
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=y
-CONFIG_MEGARAID_MAILBOX=y
-CONFIG_MEGARAID_LEGACY=y
-CONFIG_MEGARAID_SAS=y
-CONFIG_SCSI_MPT2SAS=y
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=y
-CONFIG_SCSI_BUSLOGIC=y
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=y
-CONFIG_LIBFCOE=y
-CONFIG_FCOE=y
-CONFIG_FCOE_FNIC=y
-CONFIG_SCSI_DMX3191D=y
-CONFIG_SCSI_EATA=y
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=y
-CONFIG_SCSI_GDTH=y
-CONFIG_SCSI_IPS=y
-CONFIG_SCSI_INITIO=y
-CONFIG_SCSI_INIA100=y
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=y
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-CONFIG_SCSI_QLA_ISCSI=y
-CONFIG_SCSI_LPFC=y
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=y
-CONFIG_SCSI_DC390T=y
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=y
-CONFIG_SCSI_PM8001=y
-CONFIG_SCSI_SRP=y
-CONFIG_SCSI_BFA_FC=y
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_LAN=y
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=y
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=y
-CONFIG_I2O_BLOCK=y
-CONFIG_I2O_SCSI=y
-CONFIG_I2O_PROC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF_DEPENDS=y
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI_PCI=y
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT30XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX=m
-CONFIG_WL1271=m
-CONFIG_WL1271_SDIO=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_QT602240=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WINBOND_CIR=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_IR_CORE=m
-CONFIG_VIDEO_IR=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-# CONFIG_DVB_FIREDTV_IEEE1394 is not set
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-# CONFIG_FB_HGA_ACCEL is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_HIFIER=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EGALAX=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=y
-CONFIG_USB_XHCI_HCD=y
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_USB_ISP1760_HCD=y
-CONFIG_USB_ISP1362_HCD=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=y
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_STRADIS=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
-# CONFIG_BRCMFMAC is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_AUTOFS_FS=m
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-CONFIG_FB_UDL=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_IIO is not set
-CONFIG_ZRAM=m
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_I2C=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_ITE8709=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_EASYCAP=m
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=y
-CONFIG_SPEAKUP_SYNTH_ACNTSA=y
-CONFIG_SPEAKUP_SYNTH_ACNTPC=y
-CONFIG_SPEAKUP_SYNTH_APOLLO=y
-CONFIG_SPEAKUP_SYNTH_AUDPTR=y
-CONFIG_SPEAKUP_SYNTH_BNS=y
-CONFIG_SPEAKUP_SYNTH_DECTLK=y
-CONFIG_SPEAKUP_SYNTH_DECEXT=y
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=y
-CONFIG_SPEAKUP_SYNTH_KEYPC=y
-CONFIG_SPEAKUP_SYNTH_LTLK=y
-CONFIG_SPEAKUP_SYNTH_SOFT=y
-CONFIG_SPEAKUP_SYNTH_SPKOUT=y
-CONFIG_SPEAKUP_SYNTH_TXPRT=y
-CONFIG_SPEAKUP_SYNTH_DUMMY=y
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=y
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=y
-CONFIG_OCFS2_FS_O2CB=y
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_DLM=y
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-CONFIG_BKL=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
diff --git a/source/k/config-x86/config-generic-3.2.29 b/source/k/config-x86/config-generic-3.2.29
new file mode 100644
index 00000000..c22fd081
--- /dev/null
+++ b/source/k/config-x86/config-generic-3.2.29
@@ -0,0 +1,5689 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.2.29 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/config-x86/config-generic-smp-3.2.29-smp b/source/k/config-x86/config-generic-smp-3.2.29-smp
new file mode 100644
index 00000000..04783c55
--- /dev/null
+++ b/source/k/config-x86/config-generic-smp-3.2.29-smp
@@ -0,0 +1,5719 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.2.29 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=7
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_BOOTMEM=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/config-x86/config-huge-3.2.29 b/source/k/config-x86/config-huge-3.2.29
new file mode 100644
index 00000000..f87b41ab
--- /dev/null
+++ b/source/k/config-x86/config-huge-3.2.29
@@ -0,0 +1,5688 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.2.29 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=y
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=y
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/config-x86/config-huge-smp-3.2.29-smp b/source/k/config-x86/config-huge-smp-3.2.29-smp
new file mode 100644
index 00000000..0edaedf5
--- /dev/null
+++ b/source/k/config-x86/config-huge-smp-3.2.29-smp
@@ -0,0 +1,5718 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.2.29 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=7
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_BOOTMEM=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=y
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=y
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/config-x86_64/config-generic-3.2.29.x64 b/source/k/config-x86_64/config-generic-3.2.29.x64
new file mode 100644
index 00000000..28d0ba91
--- /dev/null
+++ b/source/k/config-x86_64/config-generic-3.2.29.x64
@@ -0,0 +1,5478 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.2.29 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_ABYSS=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/config-x86_64/config-huge-3.2.29.x64 b/source/k/config-x86_64/config-huge-3.2.29.x64
new file mode 100644
index 00000000..1d754012
--- /dev/null
+++ b/source/k/config-x86_64/config-huge-3.2.29.x64
@@ -0,0 +1,5477 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.2.29 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
+CONFIG_CMPXCHG_DOUBLE=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_MISC_DEVICES=y
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_ABYSS=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
+CONFIG_IWLWIFI_LEGACY=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_SDIO_TEST=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_BQ20Z75=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_BQ24022=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_DSBR=m
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_COMMON=m
+CONFIG_HID_ROCCAT_ARVO=m
+CONFIG_HID_ROCCAT_KONE=m
+CONFIG_HID_ROCCAT_KONEPLUS=m
+CONFIG_HID_ROCCAT_KOVAPLUS=m
+CONFIG_HID_ROCCAT_PYRA=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET5501=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_POHMELFS=m
+# CONFIG_POHMELFS_DEBUG is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_MOUSE=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_DRM_PSB=m
+CONFIG_DRM_PSB_MRST=y
+CONFIG_DRM_PSB_MFLD=y
+CONFIG_DRM_PSB_CDV=y
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_ACPI_ASUS=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_SIGMA=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=y
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=y
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/source/k/kernel-firmware/kernel-firmware.SlackBuild b/source/k/kernel-firmware/kernel-firmware.SlackBuild
deleted file mode 100755
index f923dbbc..00000000
--- a/source/k/kernel-firmware/kernel-firmware.SlackBuild
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kernel-firmware
-
-VERSION=${VERSION:-2.6.37.6}
-ARCH=${ARCH:-noarch}
-BUILD=${BUILD:-1}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-echo "Using /usr/src/linux-2.6.37.6/"
-echo "Make sure this is *ready*..."
-mkdir -p $PKG/lib/firmware
-( cd /usr/src/linux-2.6.37.6 && make firmware_install INSTALL_FW_PATH=$PKG/lib/firmware )
-cp -a /usr/src/linux-2.6.37.6/firmware/WHENCE $PKG/lib/firmware
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kernel-firmware-${VERSION}-noarch-$BUILD.txz
-
diff --git a/source/k/kernel-firmware/slack-desc b/source/k/kernel-firmware/slack-desc
deleted file mode 100644
index 8a2d40cc..00000000
--- a/source/k/kernel-firmware/slack-desc
+++ /dev/null
@@ -1,11 +0,0 @@
-kernel-firmware: kernel-firmware (Firmware installed by the kernel)
-kernel-firmware:
-kernel-firmware: These are the firmware files from the Linux kernel.
-kernel-firmware:
-kernel-firmware: You'll need these to use certain hardware with Linux.
-kernel-firmware:
-kernel-firmware:
-kernel-firmware:
-kernel-firmware:
-kernel-firmware:
-kernel-firmware:
diff --git a/source/k/kernel-generic/kernel-generic.SlackBuild b/source/k/kernel-generic/kernel-generic.SlackBuild
deleted file mode 100755
index 46a81270..00000000
--- a/source/k/kernel-generic/kernel-generic.SlackBuild
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-KERNNAME=generic
-VERSION=${VERSION:-2.6.37.6}
-ARCH=${ARCH:-x86_64}
-KARCH=${KARCH:-x86}
-BUILD=${BUILD:-1}
-
-TMP=${TMP:-/tmp}
-CWD=$(pwd)
-PKG=$TMP/package-kernel
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-# First try to find the loot in the current dir, then look
-# in /usr/src/linux-$VERSION:
-if [ -r $CWD/bzImage ]; then
-  KERNEL=$CWD/bzImage
-elif [ -r $CWD/vmlinuz ]; then
-  KERNEL=$CWD/vmlinuz
-elif [ -r $CWD/vmlinuz* ]; then
-  KERNEL=$CWD/vmlinuz*
-else 
-  KERNEL=/usr/src/linux-$VERSION/arch/${KARCH}/boot/bzImage
-fi
-
-if [ -r $CWD/System.map.gz ]; then
-  gzip -d $CWD/System.map.gz
-elif [ -r $CWD/System.map.bz2 ]; then
-  bzip2 -d $CWD/System.map.bz2
-fi
-
-if [ -r $CWD/System.map ]; then
-  SYSMAP=$CWD/System.map
-elif [ -r $CWD/System.map* ]; then
-  SYSMAP=$CWD/System.map*
-else
-  SYSMAP=/usr/src/linux-$VERSION/System.map
-fi
-if [ -r $CWD/config ]; then
-  CONFIG=$CWD/config
-elif [ -r $CWD/config* ]; then
-  CONFIG=$CWD/config*
-elif [ -r $CWD/.config ]; then
-  CONFIG=$CWD/.config
-else
-  CONFIG=/usr/src/linux-$VERSION/.config
-fi
-
-cat << EOF
-Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
-using these source files.  Please check and then hit 
-enter to make the package.
-
-KERNEL = $KERNEL
-SYSMAP = $SYSMAP
-CONFIG = $CONFIG
-
-EOF
-read junk;
-
-rm -rf $PKG
-mkdir -p $PKG
-mkdir -p $PKG/boot
-cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
-cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
-cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Build the package:
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
-
diff --git a/source/k/kernel-huge/kernel-huge.SlackBuild b/source/k/kernel-huge/kernel-huge.SlackBuild
deleted file mode 100755
index 36b23e5a..00000000
--- a/source/k/kernel-huge/kernel-huge.SlackBuild
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-KERNNAME=huge
-VERSION=${VERSION:-2.6.37.6}
-ARCH=${ARCH:-x86_64}
-KARCH=${KARCH:-x86}
-BUILD=${BUILD:-1}
-
-TMP=${TMP:-/tmp}
-CWD=$(pwd)
-PKG=$TMP/package-kernel
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-# First try to find the loot in the current dir, then look
-# in /usr/src/linux-$VERSION:
-if [ -r $CWD/bzImage ]; then
-  KERNEL=$CWD/bzImage
-elif [ -r $CWD/vmlinuz ]; then
-  KERNEL=$CWD/vmlinuz
-elif [ -r $CWD/vmlinuz* ]; then
-  KERNEL=$CWD/vmlinuz*
-else 
-  KERNEL=/usr/src/linux-$VERSION/arch/${KARCH}/boot/bzImage
-fi
-
-if [ -r $CWD/System.map.gz ]; then
-  gzip -d $CWD/System.map.gz
-elif [ -r $CWD/System.map.bz2 ]; then
-  bzip2 -d $CWD/System.map.bz2
-fi
-
-if [ -r $CWD/System.map ]; then
-  SYSMAP=$CWD/System.map
-elif [ -r $CWD/System.map* ]; then
-  SYSMAP=$CWD/System.map*
-else
-  SYSMAP=/usr/src/linux-$VERSION/System.map
-fi
-if [ -r $CWD/config ]; then
-  CONFIG=$CWD/config
-elif [ -r $CWD/config* ]; then
-  CONFIG=$CWD/config*
-elif [ -r $CWD/.config ]; then
-  CONFIG=$CWD/.config
-else
-  CONFIG=/usr/src/linux-$VERSION/.config
-fi
-
-cat << EOF
-Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
-using these source files.  Please check and then hit 
-enter to make the package.
-
-KERNEL = $KERNEL
-SYSMAP = $SYSMAP
-CONFIG = $CONFIG
-
-EOF
-read junk;
-
-rm -rf $PKG
-mkdir -p $PKG
-mkdir -p $PKG/boot
-cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
-cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
-cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
-( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Build the package:
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
-
diff --git a/source/k/kernel-modules/kernel-modules.SlackBuild b/source/k/kernel-modules/kernel-modules.SlackBuild
deleted file mode 100755
index abdb1732..00000000
--- a/source/k/kernel-modules/kernel-modules.SlackBuild
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-VERSION=${VERSION:-2.6.37.6}
-ARCH=${ARCH:-x86_64}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kernel-modules
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-echo "Using /lib/modules/${VERSION}/"
-echo "Make sure these are *ready*... compressed, or not."
-echo "However you want 'em."
-sleep 5
-mkdir -p $PKG/lib/modules
-cp -a /lib/modules/${VERSION} $PKG/lib/modules
-mkdir -p $PKG/etc/rc.d
-cat $CWD/rc.modules.new > $PKG/etc/rc.d/rc.modules-${VERSION}.new
-chmod 755 $PKG/etc/rc.d/rc.modules-${VERSION}.new
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Write out the doinst.sh:
-cat << EOF > $PKG/install/doinst.sh
-config() {
-  NEW="\$1"
-  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r \$OLD ]; then
-    mv \$NEW \$OLD
-  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
-    rm \$NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-config etc/rc.d/rc.modules-${VERSION}.new
-
-# If rc.modules is a real file, back it up:
-if [ -r etc/rc.d/rc.modules -a ! -L etc/rc.d/rc.modules ]; then
-  cp -a etc/rc.d/rc.modules etc/rc.d/rc.modules.bak 
-fi
-# Make rc.modules a symlink if it's not already, but do not replace
-# an existing symlink.  You'll have to decide to point at a new version
-# of this script on your own...
-if [ ! -L etc/rc.d/rc.modules ]; then
-  ( cd etc/rc.d ; rm -rf rc.modules )
-  ( cd etc/rc.d ; ln -sf rc.modules-${VERSION} rc.modules )
-fi
-
-# A good idea whenever kernel modules are added or changed:
-if [ -x sbin/depmod ]; then
-  chroot . /sbin/depmod -a ${VERSION} 1> /dev/null 2> /dev/null
-fi
-
-EOF
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kernel-modules-${VERSION}-$ARCH-$BUILD.txz
-
diff --git a/source/k/linux-2.6.37.6.tar.sign b/source/k/linux-2.6.37.6.tar.sign
deleted file mode 100644
index 03b750e3..00000000
--- a/source/k/linux-2.6.37.6.tar.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNj8SJyGugalF9Dw4RAmHSAJ9VFWXNTwlwSBe7i5yCYNvQ42hX0wCfWROG
-xPtNjewwYEduA0gbWuXg8lE=
-=5skN
------END PGP SIGNATURE-----
diff --git a/source/k/linux-3.2.29.tar.sign b/source/k/linux-3.2.29.tar.sign
new file mode 100644
index 00000000..7a5d9861
--- /dev/null
+++ b/source/k/linux-3.2.29.tar.sign
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v2.0.19 (GNU/Linux)
+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+=dVDz
+-----END PGP SIGNATURE-----
diff --git a/source/k/packaging-x86/kernel-generic-smp/kernel-generic-smp.SlackBuild b/source/k/packaging-x86/kernel-generic-smp/kernel-generic-smp.SlackBuild
new file mode 100755
index 00000000..a5ad06ce
--- /dev/null
+++ b/source/k/packaging-x86/kernel-generic-smp/kernel-generic-smp.SlackBuild
@@ -0,0 +1,79 @@
+#!/bin/sh
+TMP=/tmp
+CWD=`pwd`
+PKG=/tmp/package-kernel
+
+# Fill this stuff in:
+
+KERNNAME=generic-smp
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i686}
+BUILD=${BUILD:-1}
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/i386/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}_smp-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION}-smp vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION}-smp System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION}-smp config )
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/kernel-$KERNNAME-$(echo ${VERSION} | tr - _)_smp-$ARCH-$BUILD.txz
+
+# Clean up the extra stuff:
+if [ "$1" = "--cleanup" ]; then
+  rm -rf $PKG
+fi
diff --git a/source/k/packaging-x86/kernel-generic-smp/slack-desc b/source/k/packaging-x86/kernel-generic-smp/slack-desc
new file mode 100644
index 00000000..5576aeaa
--- /dev/null
+++ b/source/k/packaging-x86/kernel-generic-smp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+kernel-generic-smp: kernel-generic-smp (a general purpose SMP Linux kernel)
+kernel-generic-smp:
+kernel-generic-smp: This is a Linux kernel with built-in support for most disk
+kernel-generic-smp: controllers.  To use filesystems, or to load support for a SCSI or
+kernel-generic-smp: other controller, then you'll need to load one or more kernel
+kernel-generic-smp: modules using an initial ramdisk, or initrd.  For more information
+kernel-generic-smp: about creating an initrd, see the README.initrd file in the /boot
+kernel-generic-smp: directory.
+kernel-generic-smp:
+kernel-generic-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-generic-smp:
diff --git a/source/k/packaging-x86/kernel-generic/kernel-generic.SlackBuild b/source/k/packaging-x86/kernel-generic/kernel-generic.SlackBuild
new file mode 100755
index 00000000..95bf957f
--- /dev/null
+++ b/source/k/packaging-x86/kernel-generic/kernel-generic.SlackBuild
@@ -0,0 +1,78 @@
+TMP=/tmp
+CWD=`pwd`
+PKG=/tmp/package-kernel
+
+# Fill this stuff in:
+
+KERNNAME=generic
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/i386/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+
+# Clean up the extra stuff:
+if [ "$1" = "--cleanup" ]; then
+  rm -rf $PKG
+fi
diff --git a/source/k/packaging-x86/kernel-generic/slack-desc b/source/k/packaging-x86/kernel-generic/slack-desc
new file mode 100644
index 00000000..72c2ad29
--- /dev/null
+++ b/source/k/packaging-x86/kernel-generic/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kernel-generic: kernel-generic (a general purpose single processor Linux kernel)
+kernel-generic:
+kernel-generic: This is a Linux kernel with built-in support for most IDE controllers.
+kernel-generic: For filesystem support, or if you need to load support for a SCSI or
+kernel-generic: other controller, then you'll need to load one or more kernel modules
+kernel-generic: using an initial ramdisk, or initrd.  For more information about
+kernel-generic: creating an initrd, see the README.initrd file in the /boot directory.
+kernel-generic:
+kernel-generic:
+kernel-generic:
+kernel-generic:
diff --git a/source/k/packaging-x86/kernel-huge-smp/kernel-huge-smp.SlackBuild b/source/k/packaging-x86/kernel-huge-smp/kernel-huge-smp.SlackBuild
new file mode 100755
index 00000000..61e53bcf
--- /dev/null
+++ b/source/k/packaging-x86/kernel-huge-smp/kernel-huge-smp.SlackBuild
@@ -0,0 +1,79 @@
+#!/bin/sh
+TMP=/tmp
+CWD=`pwd`
+PKG=/tmp/package-kernel
+
+# Fill this stuff in:
+
+KERNNAME=huge-smp
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i686}
+BUILD=${BUILD:-1}
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/i386/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}_smp-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION}-smp vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION}-smp System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}-smp
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION}-smp config )
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/kernel-$KERNNAME-$(echo ${VERSION} | tr - _)_smp-$ARCH-$BUILD.txz
+
+# Clean up the extra stuff:
+if [ "$1" = "--cleanup" ]; then
+  rm -rf $PKG
+fi
diff --git a/source/k/packaging-x86/kernel-huge-smp/slack-desc b/source/k/packaging-x86/kernel-huge-smp/slack-desc
new file mode 100644
index 00000000..3feb5985
--- /dev/null
+++ b/source/k/packaging-x86/kernel-huge-smp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+kernel-huge-smp: kernel-huge-smp (a fully-loaded SMP Linux kernel)
+kernel-huge-smp:
+kernel-huge-smp: This is a Linux kernel with built-in support for most disk
+kernel-huge-smp: controllers.  If you're looking for a more stripped down kernel
+kernel-huge-smp: (this one contains everything but the kitchen sink ;-), then install
+kernel-huge-smp: the kernel-generic-smp in the /boot directory along with an initrd to
+kernel-huge-smp: load support for your boot device and filesystem.  For instructions
+kernel-huge-smp: on the initrd, see README.initrd in the /boot directory.
+kernel-huge-smp:
+kernel-huge-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-huge-smp:
diff --git a/source/k/packaging-x86/kernel-huge/kernel-huge.SlackBuild b/source/k/packaging-x86/kernel-huge/kernel-huge.SlackBuild
new file mode 100755
index 00000000..cd274ee7
--- /dev/null
+++ b/source/k/packaging-x86/kernel-huge/kernel-huge.SlackBuild
@@ -0,0 +1,79 @@
+#!/bin/sh
+TMP=/tmp
+CWD=`pwd`
+PKG=/tmp/package-kernel
+
+# Fill this stuff in:
+
+KERNNAME=huge
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/i386/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+
+# Clean up the extra stuff:
+if [ "$1" = "--cleanup" ]; then
+  rm -rf $PKG
+fi
diff --git a/source/k/packaging-x86/kernel-huge/slack-desc b/source/k/packaging-x86/kernel-huge/slack-desc
new file mode 100644
index 00000000..3c17276f
--- /dev/null
+++ b/source/k/packaging-x86/kernel-huge/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kernel-huge: kernel-huge (a fully-loaded single processor Linux kernel)
+kernel-huge:
+kernel-huge: This is a Linux kernel with built-in support for most disk controllers
+kernel-huge: and filesystems.  If you're looking for a more stripped down kernel
+kernel-huge: (this one contains everything but the kitchen sink ;-), then install
+kernel-huge: the kernel-generic from the /boot directory along with an initrd to
+kernel-huge: load support for your boot device and filesystem.  For instructions
+kernel-huge: on the initrd, see README.initrd in the /boot directory.
+kernel-huge:
+kernel-huge:
+kernel-huge:
diff --git a/source/k/packaging-x86/kernel-modules-smp/kernel-modules-smp.SlackBuild b/source/k/packaging-x86/kernel-modules-smp/kernel-modules-smp.SlackBuild
new file mode 100755
index 00000000..c6058d67
--- /dev/null
+++ b/source/k/packaging-x86/kernel-modules-smp/kernel-modules-smp.SlackBuild
@@ -0,0 +1,63 @@
+#!/bin/sh
+CWD=`pwd`
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-kernel-modules-smp
+
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i686}
+BUILD=${BUILD:-1}
+
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+rm -rf $PKG
+mkdir -p $PKG
+echo "Using /lib/modules/${VERSION}-smp/"
+echo "Make sure these are *ready*... compressed, or not."
+echo "However you want 'em."
+sleep 5
+mkdir -p $PKG/lib/modules
+cp -a /lib/modules/${VERSION}-smp $PKG/lib/modules
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.modules.new > $PKG/etc/rc.d/rc.modules-${VERSION}-smp.new
+chmod 755 $PKG/etc/rc.d/rc.modules-${VERSION}-smp.new
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Write out the doinst.sh:
+cat << EOF > $PKG/install/doinst.sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/rc.d/rc.modules-${VERSION}-smp.new
+
+# If rc.modules is a real file, back it up:
+if [ -r etc/rc.d/rc.modules -a ! -L etc/rc.d/rc.modules ]; then
+  cp -a etc/rc.d/rc.modules etc/rc.d/rc.modules.bak 
+fi
+# Make rc.modules a symlink if it's not already, but do not replace
+# an existing symlink.  You'll have to decide to point at a new version
+# of this script on your own...
+if [ ! -L etc/rc.d/rc.modules ]; then
+  ( cd etc/rc.d ; rm -rf rc.modules )
+  ( cd etc/rc.d ; ln -sf rc.modules-${VERSION}-smp rc.modules )
+fi
+
+# A good idea whenever kernel modules are added or changed:
+if [ -x sbin/depmod ]; then
+  chroot . /sbin/depmod -a ${VERSION}-smp 1> /dev/null 2> /dev/null
+fi
+
+EOF
+
+cd $PKG
+makepkg -l y -c n $TMP/kernel-modules-smp-$(echo ${VERSION} | tr - _)_smp-$ARCH-$BUILD.txz
+
diff --git a/source/k/kernel-modules/rc.modules.new b/source/k/packaging-x86/kernel-modules-smp/rc.modules.new
index cb1fbec6..cb1fbec6 100755
--- a/source/k/kernel-modules/rc.modules.new
+++ b/source/k/packaging-x86/kernel-modules-smp/rc.modules.new
diff --git a/source/k/packaging-x86/kernel-modules-smp/slack-desc b/source/k/packaging-x86/kernel-modules-smp/slack-desc
new file mode 100644
index 00000000..55e5cb57
--- /dev/null
+++ b/source/k/packaging-x86/kernel-modules-smp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+kernel-modules-smp: kernel-modules (SMP Linux kernel modules)
+kernel-modules-smp:
+kernel-modules-smp: A kernel module is a piece of object code that can be dynamically
+kernel-modules-smp: loaded into the Linux kernel to provide new kernel functions.  Most of
+kernel-modules-smp: these modules provide support for devices such as CD-ROM drives, tape
+kernel-modules-smp: drives, and ethernet cards.  You can choose which modules to load by
+kernel-modules-smp: editing /etc/rc.d/rc.modules.
+kernel-modules-smp:
+kernel-modules-smp:
+kernel-modules-smp:
+kernel-modules-smp:
diff --git a/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild b/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild
new file mode 100755
index 00000000..5601b28f
--- /dev/null
+++ b/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild
@@ -0,0 +1,67 @@
+#!/bin/sh
+CWD=`pwd`
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-kernel-modules
+
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-i686}
+BUILD=${BUILD:-1}
+
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+rm -rf $PKG
+mkdir -p $PKG
+echo "Using /lib/modules/${VERSION}/"
+echo "Make sure these are *ready*... compressed, or not."
+echo "However you want 'em."
+sleep 5
+mkdir -p $PKG/lib/modules
+cp -a /lib/modules/${VERSION} $PKG/lib/modules
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.modules.new > $PKG/etc/rc.d/rc.modules-${VERSION}.new
+chmod 755 $PKG/etc/rc.d/rc.modules-${VERSION}.new
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Write out the doinst.sh:
+cat << EOF > $PKG/install/doinst.sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/rc.d/rc.modules-${VERSION}.new
+
+# If rc.modules is a real file, back it up:
+if [ -r etc/rc.d/rc.modules -a ! -L etc/rc.d/rc.modules ]; then
+  cp -a etc/rc.d/rc.modules etc/rc.d/rc.modules.bak 
+fi
+## Now that -smp is default, we probably shouldn't be so paranoid about
+## preserving existing symlinks as it causes a full install to point to
+## the wrong rc.modules script.  If you want your rc.modules to endure,
+## copy it to rc.modules.local.
+## Make rc.modules a symlink if it's not already, but do not replace
+## an existing symlink.  You'll have to decide to point at a new version
+## of this script on your own...
+#if [ ! -L etc/rc.d/rc.modules ]; then
+#  ( cd etc/rc.d ; rm -rf rc.modules )
+#  ( cd etc/rc.d ; ln -sf rc.modules-${VERSION} rc.modules )
+#fi
+
+# A good idea whenever kernel modules are added or changed:
+if [ -x sbin/depmod ]; then
+  chroot . /sbin/depmod -a ${VERSION} 1> /dev/null 2> /dev/null
+fi
+
+EOF
+
+cd $PKG
+makepkg -l y -c n $TMP/kernel-modules-${VERSION}-$ARCH-$BUILD.txz
+
diff --git a/source/k/packaging-x86/kernel-modules/rc.modules.new b/source/k/packaging-x86/kernel-modules/rc.modules.new
new file mode 100755
index 00000000..cb1fbec6
--- /dev/null
+++ b/source/k/packaging-x86/kernel-modules/rc.modules.new
@@ -0,0 +1,924 @@
+#!/bin/sh
+# rc.modules 12.3456789  Sun May 10 05:31:26 UTC 2009  pp (rb), pjv, rlw
+#
+# This file loads extra drivers into the Linux kernel.
+#
+# The modules will be looked for under /lib/modules/<kernel version number>
+# On systems using udev, this file should remain mostly commented out.  
+# Nearly all hardware device modules will be loaded automatically on such 
+# systems.  This file should only be used when udev is not loading a module 
+# that you require, or if you are not using udev (which is going to become 
+# increasingly impossible...), or if you want to force a particular module 
+# to be loaded where alternatives exist.
+#
+# Many Linux kernel modules will accept extra options.  The Linux kernel
+# source is the best place to look for extra documentation for the various
+# modules.  This can be found under /usr/src/linux/Documentation if you've
+# the installed the kernel sources. 
+#
+# NOTE:  This may not be a complete list of modules.  If you don't see what
+# you're looking for, look around in /lib/modules/2.x.x/ for an appropriate
+# module.  Also, if any problems arise loading or using these modules, try
+# compiling and installing a custom kernel that contains the support instead.
+# That always works. ;^)
+
+# Determine the version of the running kernel:
+RELEASE=$(uname -r)
+
+### Update module dependencies ###
+# If /usr is mounted and we have 'find', we can try to take a shortcut:
+if [ -x /usr/bin/find -a -e /lib/modules/$RELEASE/modules.dep \
+     -a /lib/modules/$RELEASE/modules.dep -nt /etc/modules.conf ]; then
+  NEWMODS="$(/usr/bin/find /lib/modules/$RELEASE -mindepth 2 -type f -newer /lib/modules/$RELEASE/modules.dep)"
+  # Only rebuild dependencies if new module(s) are found:
+  if [ ! "" = "$NEWMODS" ]; then
+    echo "Updating module dependencies for Linux $RELEASE:"
+    /sbin/depmod -a
+  else
+    echo "Module dependencies up to date (no new kernel modules found)."
+  fi
+else # we don't have find, or there is no existing modules.dep, or it is out of date.
+  echo "Updating module dependencies for Linux $RELEASE:"
+  /sbin/depmod -A
+fi
+
+### Mouse support:
+# PS/2 mouse support:
+# The default in Slackware is to use proto=imps because that works with the
+# most types of mice out of the box.  For example, using proto=any will
+# completely break the mouse if you change consoles with several models of KVM
+# switches.
+#
+# This is commented out here because a better place to configure the options
+# for the psmouse module is in /etc/modprobe.d/psmouse.
+#
+#/sbin/modprobe psmouse proto=imps
+#
+# Serial (RS-232, COM port) mouse support:
+#/sbin/modprobe sermouse
+#
+# Microsoft/ATI XL busmouse support:
+# Microsoft busmouse (also called Inport mice) is connected to an 
+# expansion board using a round connector with 9 pins.  Be aware that 
+# several vendors talk about 'Microsoft busmouse' and actually mean 
+# PS/2 busmouse -- so count the pins on the connector.  This driver
+# also supports the ATIXL mouse, a rare mouse that is connected to the
+# back of an ATI video card:
+#/sbin/modprobe inport 
+#
+# Logitech mouse connected to a proprietary interface card. It's
+# generally a round connector with 9 pins.  Note that the newer mice
+# made by Logitech don't use the Logitech protocol anymore; for those,
+# you don't need this module:
+#/sbin/modprobe logibm 
+#
+# IBM PC110 palmtop digitizer pad:
+#/sbin/modprobe pc110pad
+
+#### ACPI support ###
+# Advanced Configuration and Power Interface (ACPI) support for Linux
+# requires an ACPI compliant platform (hardware/firmware), and assumes
+# the presence of OS-directed configuration and power management (OSPM)
+# software.  Linux ACPI provides a robust functional replacement for
+# several legacy configuration and power management interfaces, including
+# the Plug-and-Play BIOS specification (PnP BIOS), the MultiProcessor
+# Specification (MPS), and the Advanced Power Management (APM)
+# specification.  If both ACPI and APM support are configured, whichever
+# is loaded first shall be used.  Also note that in many cases udev will
+# load the required modules if ACPI is found to be active.
+# ACPI can be disabled with the "noacpi" boot option.
+# Also note that ACPI is blacklisted with our default kernel
+# configurations on machines with a BIOS older than 2001-01-01.  If you
+# still want to try it, you'll need to use the "acpi=force" boot option.
+#
+# AC Adapter (indicates whether a system is on AC, or not):
+#/sbin/modprobe ac
+#
+# Battery (adds battery information through/proc/acpi/battery):
+#/sbin/modprobe battery
+#
+# Button (handles events on the power, sleep and lid buttons):
+#/sbin/modprobe button
+#
+# Video.  This driver implements the ACPI Extensions For Display Adapters
+# for integrated graphics devices on motherboard, as specified in ACPI 2.0
+# Specification, Appendix B, allowing some basic control like defining the
+# video POST device, retrieving EDID information, or to setup a video output.
+# Note that this is an reference implementation only, and it may or may not
+# work for your integrated video device.
+#/sbin/modprobe video
+#
+# Fan (adds support for ACPI fan control and status):
+#/sbin/modprobe fan
+#
+# Dock (adds support for ACPI controlled docking stations):
+#/sbin/modprobe dock
+#
+# Bay (adds support for ACPI controlled removable drive bays such as the
+# IBM UltraBay or the Dell Module Bay):
+#/sbin/modprobe bay
+#
+# Processor.  This driver installs ACPI as the idle handler for Linux, and
+# uses ACPI C2 and C3 processor states to save power, on systems that
+# support it.  It is required by several flavors of cpufreq Performance-
+# state drivers.
+#/sbin/modprobe processor
+#
+# Thermal.  This driver adds support for ACPI thermal zones.  Most mobile and
+# some desktop systems support ACPI thermal zones.  It is HIGHLY recommended
+# that this option be enabled, as your processor(s) may be damaged without it.
+#/sbin/modprobe thermal
+#
+# Memory.  This driver adds support for ACPI Memory Hotplug.  This driver
+# provides support for fielding notifications on ACPI memory devices
+# (PNP0C80) which represent memory ranges that may be onlined or offlined
+# during runtime.  Enabling this driver assumes that your platform hardware
+# and firmware have support for hot-plugging physical memory.  If your
+# system does not support physically adding or ripping out memory DIMMs at
+# some platform defined granularity (individually or as a bank) at runtime,
+# then you need not enable this driver.
+#/sbin/modprobe memory
+#
+# Container (EXPERIMENTAL -- allows _physical_ insertion and removal of CPUs
+# and memory on machines that support it):
+#/sbin/modprobe container
+#
+# ASUS/Medion Laptop Extras.  This driver provides support for extra features
+# of ACPI-compatible ASUS laptops.  As some of Medion laptops are made by
+# ASUS, it may also support some Medion laptops (such as 9675 for example).
+# It makes all the extra buttons generate standard ACPI events that go through
+# /proc/acpi/events, and (on some models) adds support for changing the
+# display brightness and output, switching the LCD backlight on and off, and,
+# most importantly, allows you to blink those fancy LEDs intended for
+# reporting mail and wireless status.  All settings are changed via
+# /proc/acpi/asus directory entries.  Owner and group for these entries can be
+# set with asus_uid and asus_gid module parameters.
+# More information and a userspace daemon for handling the extra buttons:
+# http://sourceforge.net/projects/acpi4asus/
+#/sbin/modprobe asus_acpi
+#
+# ThinkPad ACPI Laptop Extras.  This is a driver for the IBM and Lenovo
+# ThinkPad laptops.  It adds support for Fn-Fx key combinations, Bluetooth
+# control, video output switching, ThinkLight control, UltraBay eject and
+# more.  For more information about this driver see:
+# Documentation/thinkpad-acpi.txt and http://ibm-acpi.sf.net/
+#/sbin/modprobe thinkpad_acpi
+#
+# Toshiba Laptop Extras.  This driver adds support for access to certain
+# system settings on "legacy free" Toshiba laptops.  These laptops can be
+# recognized by their lack of a BIOS setup menu and APM support.  On these
+# machines, all system configuration is handled through the ACPI.  This
+# driver is required for access to controls not covered by the general ACPI
+# drivers, such as LCD brightness and video output.  Configuration is
+# accessed by reading and writing text files in the /proc tree.  Furthermore,
+# no power management functions are exposed, as those are handled by the
+# general ACPI drivers.
+# More information about this driver is available at:
+# http://memebeam.org/toys/ToshibaAcpiDriver
+#/sbin/modprobe toshiba_acpi
+#
+#
+# See also the ACPI CPU frequency scaling driver in the "CPU frequency
+# scaling modules" section below.
+
+#### APM support ###
+# APM is a BIOS specification for saving power using several different
+# techniques.  This is mostly useful for battery powered laptops.
+# If a kernel supports ACPI it will always be built in, not a module.
+# APM is considered obsolete on newer hardware -- most things have ACPI.
+#/sbin/modprobe apm
+
+# Enable PC speaker support:
+#/sbin/modprobe pcspkr
+
+### Built-in PC parallel port support ###
+# Generic setup example.  Attempt to load by default, since it usually
+# won't hurt.  Some (most?) people may want to comment the line below
+# and look into better functioning and performing hardware specific
+# options as described later on in this section.
+#
+/sbin/modprobe -q parport_pc 2> /dev/null
+# Hardware specific setup example  (PLIP requires an IRQ, and the
+# ECP protocol requires a DMA channel)
+# This may also give better performance in general.
+#/sbin/modprobe parport_pc io=0x378 irq=7 dma=1
+
+### PCI parallel/serial card support:
+# If your serial/parallel ports are on a PCI card, uncomment the
+# line below and comment the section above that loads parport_pc.
+#/sbin/modprobe parport_serial
+
+### Parallel printer support ###
+# This should be safe to try to load by default.
+/sbin/modprobe -q lp 2> /dev/null
+
+### Parallel port IP ###
+#/sbin/modprobe plip
+
+### Filesystem Quota support ###
+if /bin/grep -q quota /etc/fstab ; then
+  # /sbin/modprobe quota_v1
+  /sbin/modprobe quota_v2
+fi
+
+### AGP (Accelerated Graphics Port) GART support ###
+# This module takes care of programming the GART (part of your motherboard's
+# chipset that handles gathering data from memory and passing it to the
+# card) and enables faster AGP transfers.  The AGP GART module is required
+# to use AGP features of your 3D rendering video card.  You'll need this to
+# with most cards (nVidia's official drivers that include their own GART
+# support being a notable exception) to use X11's direct rendering support.
+/sbin/modprobe agpgart 2> /dev/null
+
+### non-IDE CD-ROM drive support ###
+# These modules add CD-ROM drive support.  Most of these drivers will probe
+# for the I/O address and IRQ of the drive automatically if the parameters
+# to configure them are omitted. Typically the I/O address will be specified 
+# in hexadecimal, e.g.: cm206=0x300,11
+#
+# ***NONE*** of these drivers are for use with IDE/ATAPI CD-ROM drives.  That
+# support is already built into every pre-compiled Slackware Linux kernel.
+# Also, note that all of the manufacturers listed below stopped making these
+# types of wacky-interface drives years ago and all make IDE/ATAPI-interface
+# CD-ROM drives now.  So, just because your drive says "Mitsumi" on it is not 
+# reason enough to think you need the special Mitsumi module loaded, etc.  If
+# you got your drive within the last couple of years it's probably IDE.  Try 
+# tossing a disc in the drive and mounting it on the various IDE interfaces it
+# could be using, like /dev/hdc. 
+# 
+#/sbin/modprobe aztcd aztcd=<I/O address>
+#/sbin/modprobe cdu31a cdu31a_port=<I/O address> cdu31a_irq=<interrupt>
+#/sbin/modprobe cm206 cm206=<I/O address>,<IRQ>
+#/sbin/modprobe gscd gscd=<I/O address>
+#/sbin/modprobe mcdx mcdx=<I/O address>,<IRQ>
+#/sbin/modprobe optcd optcd=<I/O address>
+# Below, this last number is "1" for SoundBlaster Pro card, or "0" for a clone.
+#/sbin/modprobe sbpcd sbpcd=<I/O address>,1
+#/sbin/modprobe sjcd sjcd=<I/O address>
+#/sbin/modprobe sonycd535 sonycd535=<I/O address>
+
+# CD-ROM drives on ISP16, MAD16 or Mozart sound card:
+#/sbin/modprobe isp16 isp16_cdrom_base=<port> isp16_cdrom_irq=<irq> isp16_cdrom_dma=<dma> isp16_cdrom_type=<drive_type>
+#  where the values are one of: port=0x340,0x320,0x330,0x360
+#                               irq=0,3,5,7,9,10,11
+#                               dma=0,3,5,6,7
+#                               drive_type=noisp16,Sanyo,Panasonic,Sony,Mitsumi
+
+### Cyclades multiport serial card support ###
+#/sbin/modprobe cyclades
+
+#### Serial line IP support (SLIP/CSLIP/PPP) ###
+## This module is for SLIP/CSLIP support:
+#/sbin/modprobe slip
+
+## Load PPP:
+# This module is for PPP support:
+#/sbin/modprobe ppp_generic
+# This PPP plugin supports PPP over serial lines:
+#/sbin/modprobe ppp_async
+# Use this plugin instead for HDLC (used for high-speed leased lines like T1/E1)
+#/sbin/modprobe ppp_synctty
+
+## This module provides compression for PPP (optional):
+##/sbin/modprobe ppp_deflate
+
+### USB Host Controllers:
+# Enhanced Host Controller Interface (USB 2.0)
+#/sbin/modprobe ehci-hcd
+# Open Host Controller Interface (Compaq/Microsoft/National standard):
+#/sbin/modprobe ohci-hcd
+# Universal Host Controller Interface (Intel/Via standard):
+#/sbin/modprobe uhci-hcd
+# ISP1160/ISP1161 USB Host Controllers
+#/sbin/modprobe isp116x-hcd
+# SL811HS USB Host Controller
+#/sbin/modprobe sl811-hcd
+# SL811HS PCMCIA/CF USB Host Controller
+#/sbin/modprobe sl811_cs
+
+### USB device support:
+# (Note that once you've loaded USB hub support most USB devices will
+# trigger the kernel to load their modules automatically)
+# USB "Human Interface Device" driver; handles most USB mice, joysticks,
+# gamepads, steering wheels, keyboards, trackballs and digitizers.
+#/sbin/modprobe usbhid
+# Simple HIDBP USB mouse driver, if hid doesn't work:
+#/sbin/modprobe usbmouse
+# Simple HIDBP USB keyboard driver, if hid doesn't work:
+#/sbin/modprobe usbkbd
+# Wacom Graphire and Intuos tablet driver:
+#/sbin/modprobe wacom
+# Logitech WingMan Force joystick:
+#/sbin/modprobe iforce
+# USB audio:
+#/sbin/modprobe audio
+# USB modem support:
+#/sbin/modprobe cdc-acm
+# USB serial converter:
+#/sbin/modprobe usbserial
+# USB printer support:
+#/sbin/modprobe usblp 
+# IBM "C-It" USB video camera:
+#/sbin/modprobe ibmcam framerate=1
+# USB OV511 Camera support:
+#/sbin/modprobe ov511
+# USB ADMtek Pegasus-based ethernet device support:
+#/sbin/modprobe pegasus
+# Kawasaki USB ethernet controller support:
+#/sbin/modprobe kaweth
+# USB Mustek MDC800 Digital Camera Support:
+#/sbin/modprobe mdc800
+# USB Mass Storage support:
+#/sbin/modprobe usb-storage
+# USS720 parallel-port driver:
+#/sbin/modprobe uss720
+# Prolific PL-2302 USB-to-USB network device:
+#/sbin/modprobe plusb
+# USB Diamond Rio500 support:
+#/sbin/modprobe rio500
+# D-Link DSB-R100 FM radio support:
+#/sbin/modprobe dsbr100
+# USB Bluetooth support:
+#/sbin/modprobe bluetooth
+
+### USB event drivers:
+# Mouse input:
+#/sbin/modprobe mousedev
+# Joystick input:
+#/sbin/modprobe joydev
+# Generic event reporting device:
+#/sbin/modprobe evdev
+
+### ALSA (Advanced Linux Sound Architecture) support: 
+# Sound Blaster Pro/16 support:
+#/sbin/modprobe snd-sb16 port=0x220 irq=5 dma8=3 dma16=5 mpu_port=0x300
+# Sound Blaster Live support:
+#/sbin/modprobe snd-emu10k1
+# AD1816(A) sound driver:
+#/sbin/modprobe snd-ad1816a port=0x530 irq=5 dma1=1 dma2=3
+# Crystal CS4232 based (PnP) cards:
+#/sbin/modprobe snd-cs4232
+# ES1370 (Ensoniq AudioPCI ES1370) support.  This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1370 chipset), and
+# Ensoniq AudioPCI-97:
+#/sbin/modprobe snd-ens1370
+# ES1371 (Ensoniq AudioPCI ES1371/73) support.  This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1371/73 chipset), Ectiva
+# EV1938, Vibra PCI128, and Ensoniq AudioPCI ES1371/73:
+#/sbin/modprobe snd-ens1371
+# ESS Maestro, Maestro2, Maestro2E:
+#/sbin/modprobe snd-es1968 
+# ESS Maestro3/Allegro:
+#/sbin/modprobe snd-maestro3
+# VIA VT82xx Audio Controller
+#/sbin/modprobe snd-via82xx
+# (For information on configuring other sound cards with Linux,
+# see the documentation in /usr/src/linux/Documentation/sound/,
+# and /usr/src/linux/Documentation/Configure.help.
+
+### Joystick support ###
+# The core joystick input support module, needed by all of the
+# joystick devices below:
+#/sbin/modprobe joydev
+### Next, you must load a module for your gameport.
+# Classic ISA/PnP gameports:
+#/sbin/modprobe ns558
+# SoundBlaster Live! gameports:
+#/sbin/modprobe emu10k1-gp
+# Many soundcards had their gameport support bundled in sound drivers
+### Drivers for various joystick devices ###
+# Analog joysticks and gamepads:
+#/sbin/modprobe analog
+# Assassin 3D and MadCatz Panther devices:
+#/sbin/modprobe a3d
+# Logitech ADI digital joysticks and gamepads:
+#/sbin/modprobe adi
+# Creative Labs Blaster Cobra gamepad:
+#/sbin/modprobe cobra
+# Genius Flight2000 Digital joysticks and gamepads:
+#/sbin/modprobe gf2k
+# Gravis GrIP joysticks and gamepads:
+#/sbin/modprobe grip
+# InterAct digital joysticks and gamepads:
+#/sbin/modprobe interact
+# ThrustMaster DirectConnect joysticks and gamepads:
+#/sbin/modprobe tmdc
+# Microsoft SideWinder digital joysticks and gamepads:
+#/sbin/modprobe sidewinder
+### Serial port game controller support ###
+# Both of these are needed for serial-port game controllers:
+#/sbin/modprobe serio
+#/sbin/modprobe serport
+# Logitech WingMan Warrior joystick:
+#/sbin/modprobe warrior
+# LogiCad3d Magellan/SpaceMouse 6dof controller:
+#/sbin/modprobe magellan
+# SpaceTec SpaceOrb/Avenger 6dof controller:
+#/sbin/modprobe spaceorb
+# SpaceTec SpaceBall 4000 FLX 6dof controller:
+#/sbin/modprobe spaceball
+# Gravis Stinger gamepad:
+#/sbin/modprobe stinger
+# I-Force joysticks/wheels:
+#/sbin/modprobe iforce
+### Parallel port connected controllers ###
+# Multisystem, Sega Genesis, Saturn joysticks and gamepads:
+#/sbin/modprobe db9
+# Multisystem, NES, SNES, N64, PSX joysticks and gamepads:
+#/sbin/modprobe gamecon
+# Multisystem joysticks via TurboGraFX device:
+#/sbin/modprobe turbografx
+
+### Appletalk support ###
+# This is needed if you want to run netatalk, a package which allows
+# you to use you Linux box as a file and print server for Apple Macintosh 
+# computers on your local network.
+#/sbin/modprobe appletalk
+
+### IPX networking support ###
+#/sbin/modprobe ipx
+
+### IDE device support ###
+# IDE CD-ROM drives:
+#/sbin/modprobe ide-cd
+# IDE hard drives:
+#/sbin/modprobe ide-disk
+# IDE floppy drives:
+#/sbin/modprobe ide-floppy
+# IDE tape drives:
+#/sbin/modprobe ide-tape
+
+### Network device support ###
+# Most of these drivers will probe automatically for the card if you don't
+# specify an I/O address and IRQ.  
+#
+# First, if setup probing found a network card, there may be an 'rc.netdevice'
+# file that we should run to load the network module:
+if [ -x /etc/rc.d/rc.netdevice ]; then
+  . /etc/rc.d/rc.netdevice
+fi
+
+### Ethernet cards based on the 8390 chip.
+# 3com 3c503 support:
+#/sbin/modprobe 3c503 
+# Ansel Communications EISA 3200 support:
+#/sbin/modprobe ac3200
+# Cabletron E21xx support:
+#/sbin/modprobe e2100
+# HP PCLAN+ (27247B and 27252A) support:
+#/sbin/modprobe hp-plus
+# HP PCLAN (27245 and other 27xxx series) support:
+#/sbin/modprobe hp
+# NE2000/NE1000 support (non PCI):
+#/sbin/modprobe ne io=0x300 # NE2000 at 0x300
+#/sbin/modprobe ne io=0x280 # NE2000 at 0x280
+#/sbin/modprobe ne io=0x320 # NE2000 at 0x320
+#/sbin/modprobe ne io=0x340 # NE2000 at 0x340
+#/sbin/modprobe ne io=0x360 # NE2000 at 0x360
+# PCI NE2000 clone support:
+#/sbin/modprobe ne2k-pci
+# SMC Ultra support:
+#/sbin/modprobe smc-ultra
+# SMC Ultra32 EISA support:
+#/sbin/modprobe smc-ultra32
+# Western Digital WD80*3 (and clones) support:
+#/sbin/modprobe wd
+#
+# Other network hardware drivers:
+# 
+# 3com 3c501 (consider buying a new card, since the 3c501 is slow,
+# broken, and obsolete):
+#/sbin/modprobe 3c501
+# 3com 3c503:
+#/sbin/modprobe 3c503
+# 3com 3c505:
+#/sbin/modprobe 3c505
+# 3com 3c507:
+#/sbin/modprobe 3c507
+# 3com 3c509 and 3c579:
+#/sbin/modprobe 3c509
+# 3com 3c515:
+#/sbin/modprobe 3c515
+# This one works for all 3com 3c590/3c592/3c595/3c597 and the
+# EtherLink XL 3c900 and 3c905 cards:
+#/sbin/modprobe 3c59x
+# Apricot Xen-II on board Ethernet:
+#/sbin/modprobe apricot
+# Generic ARCnet support:
+#/sbin/modprobe arcnet
+# AT1700/1720 & Fujitsu FMV-181/182/183/184 support:
+#/sbin/modprobe at1700
+# AT-LAN-TEC/RealTek pocket adapter support:
+#/sbin/modprobe atp
+# BPQ Ethernet driver:
+#/sbin/modprobe bpqether
+# Generic DECchip & DIGITAL EtherWORKS PCI/EISA:
+#/sbin/modprobe de4x5
+# D-Link DE600 pocket adapter support:
+#/sbin/modprobe de600
+# D-Link DE620 pocket adapter support:
+#/sbin/modprobe de620
+# DEPCA support:
+#/sbin/modprobe depca
+# Digi International RightSwitch cards:
+#/sbin/modprobe dgrs
+# Intel EtherExpress Pro support:
+#/sbin/modprobe eepro
+# Intel EtherExpress PRO/100 PCI support:
+#/sbin/modprobe eepro100
+# Intel EtherExpress16 support:
+#/sbin/modprobe eexpress
+# SMC EtherPower II 9432 PCI support:
+#/sbin/modprobe epic100
+# ICL EtherTeam 16i/32 support:
+#/sbin/modprobe eth16i
+# DEC EtherWorks 3 support:
+#/sbin/modprobe ewrk3
+# HP 10/100VG PCLAN (ISA, EISA, PCI) support:
+#/sbin/modprobe hp100
+# IBM Tropic chipset based adapter support:
+#/sbin/modprobe ibmtr
+# AMD LANCE and PCnet (AT1500 and NE2100) support:
+#/sbin/modprobe lance
+# National Semiconductor DP8381x series PCI Ethernet support:
+#/sbin/modprobe natsemi
+# NI5210 support:
+#/sbin/modprobe ni52
+# NI6510 support:
+#/sbin/modprobe ni65
+# AMD PCnet32 (VLB and PCI) support:
+#/sbin/modprobe pcnet32
+# Red Creek Hardware Virtual Private Network (VPN) support:
+#/sbin/modprobe rcpci
+# RealTek 8129/8139 (not 8019/8029!) support:
+#/sbin/modprobe 8139too
+# RealTek 8139C+ enhanced support:
+#/sbin/modprobe 8139cp
+# Sangoma S502A FRAD support:
+#/sbin/modprobe sdla
+# SMC 9194 support:
+#/sbin/modprobe smc9194
+# TI ThunderLAN support:
+#/sbin/modprobe tlan
+# DECchip Tulip (dc21x4x) PCI support:
+#/sbin/modprobe tulip
+# VIA Rhine support:
+#/sbin/modprobe via-rhine
+# AT&T WaveLAN & DEC RoamAbout DS support:
+#/sbin/modprobe wavelan
+# Packet Engines Yellowfin Gigabit-NIC support:
+#/sbin/modprobe yellowfin
+# Davicom DM9xxx (9102/9132/9100/9802...)
+#/sbin/modprobe dmfe
+# SiS 900/7016 PCI Fast Ethernet
+#/sbin/modprobe sis900
+
+### Serial line load balancing support ###
+#/sbin/modprobe eql
+
+### "dummy" IP support ###
+# A dummy IP driver.  Essentially a loopback device.  Can be useful --
+# see the Network Administrator's Guide from sunsite.unc.edu:/pub/Linux/docs/LDP
+#/sbin/modprobe dummy
+
+### ISDN kernel support ###
+#/sbin/modprobe isdn
+# ISDN loop (provides a virtual ISDN card for testing):
+#/sbin/modprobe isdnloop
+
+### ISDN interface support ###
+# AVM-B1 with CAPI2.0 driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.avmb1):
+#/sbin/modprobe capidrv
+# HiSax SiemensChipSet driver (supports AVM A1, Elsa ISDN cards, 
+# Teles S0-16.0, Teles S0-16.3, Teles S0-8, Teles/Creatix PnP,
+# ITK micro ix1 and many compatibles):
+#/sbin/modprobe hisax
+# IBM Active 2000 ISDN card support (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.act2000 for more information)
+#/sbin/modprobe act2000
+# ICN active ISDN card driver:
+#/sbin/modprobe icn
+# PCBIT-D driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.pcbit for more information)
+#/sbin/modprobe pcbit
+# Spellcaster BRI ISDN driver:
+#/sbin/modprobe sc
+
+### Binary format support ###
+#/sbin/modprobe binfmt_aout
+#/sbin/modprobe binfmt_elf
+#/sbin/modprobe binfmt_java
+#/sbin/modprobe binfmt_misc
+
+### Filesystem support ###
+#/sbin/modprobe adfs
+#/sbin/modprobe affs
+#/sbin/modprobe autofs4
+#/sbin/modprobe coda
+#/sbin/modprobe cramfs
+#/sbin/modprobe exportfs
+#/sbin/modprobe ext2
+#/sbin/modprobe ext3
+#/sbin/modprobe fat
+#/sbin/modprobe fuse
+#/sbin/modprobe hfs
+#/sbin/modprobe hfsplus
+#/sbin/modprobe hpfs
+#/sbin/modprobe intermezzo
+#/sbin/modprobe isofs
+#/sbin/modprobe jfs
+#/sbin/modprobe minix
+#/sbin/modprobe msdos
+#/sbin/modprobe ncpfs
+#/sbin/modprobe nfs
+#/sbin/modprobe ntfs
+#/sbin/modprobe ocfs2
+#/sbin/modprobe qnx4
+#/sbin/modprobe reiserfs
+#/sbin/modprobe relayfs
+#/sbin/modprobe romfs
+#/sbin/modprobe smbfs
+#/sbin/modprobe sysfs
+#/sbin/modprobe sysv
+#/sbin/modprobe tmpfs
+#/sbin/modprobe udf
+#/sbin/modprobe ufs
+#/sbin/modprobe umsdos
+#/sbin/modprobe usbfs
+#/sbin/modprobe vfat
+#/sbin/modprobe xfs
+
+### RAID (Multiple Devices) support ###
+#/sbin/modprobe linear
+#/sbin/modprobe raid0
+#/sbin/modprobe raid1
+#/sbin/modprobe raid5
+
+# Note: this *IS NOT* needed to burn discs with 2.6.x or newer kernels.
+#
+# SCSI emulation support.  This will provide SCSI host adapter emulation
+# for IDE ATAPI devices, and will allow you to use a SCSI device driver
+# instead of a native ATAPI driver.  This is useful if you have an ATAPI
+# device for which no native driver has been written (for example, an ATAPI
+# PD-CD, CD-RW, or DVD-RW drive);  you can then use this emulation together
+# with an # appropriate SCSI device driver.  Note that this option does not
+# allow you to attach SCSI devices to a box that doesn't have a SCSI host
+# adapter installed.  :-)  Also, you'll need to tell the ide-scsi module
+# which device is your burner so that the normal ATAPI driver won't grab it
+# first.  This is done by passing a flag to the kernel at boot time.
+# If you're using LILO, add this:  append="hdc=ide-scsi"
+# Replace "hdc" with the appropriate device name.
+#
+#/sbin/modprobe ide-scsi
+
+### SCSI kernel support:
+#/sbin/modprobe scsi_mod
+#/sbin/modprobe scsi_syms
+#/sbin/modprobe sd_mod
+#/sbin/modprobe sg
+#/sbin/modprobe sr_mod
+#/sbin/modprobe st
+
+### SCSI controller support:
+# NCR53c7xx SCSI support: 
+#/sbin/modprobe 53c7xx
+# BusLogic MultiMaster and FlashPoint SCSI support:
+#/sbin/modprobe BusLogic
+# NCR53c406a SCSI support:
+#/sbin/modprobe NCR53c406a
+# Initio INI-A100U2W SCSI support:
+#/sbin/modprobe a100u2w
+# AdvanSys SCSI support:
+#/sbin/modprobe advansys 
+# Adaptec AHA152X/2825 support:
+#/sbin/modprobe aha152x
+# Adaptec AHA1542 support:
+#/sbin/modprobe aha1542
+# Adaptec AHA1740 support:
+#/sbin/modprobe aha1740
+# This is support for the various aic7xxx based Adaptec SCSI
+# controllers. These include the 274x EISA cards; 284x VLB cards;
+# 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+# motherboard based SCSI controllers from Adaptec:
+#/sbin/modprobe aic7xxx
+# ACARD 870U/W SCSI support:
+#/sbin/modprobe atp870u
+# DTC 3180/3280 SCSI support:
+#/sbin/modprobe dtc
+# EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support:
+#/sbin/modprobe eata
+# EATA-PIO (old DPT PM2001, PM2012A) support:
+#/sbin/modprobe eata_pio
+# Future Domain 16xx SCSI/AHA-2920A support:
+#/sbin/modprobe fdomain
+# Generic NCR5380/53c400 SCSI support:
+#/sbin/modprobe g_NCR5380
+# GDT SCSI Disk Array Controller support:
+#/sbin/modprobe gdth
+# IOMEGA parallel port (imm - newer drives like ZipPlus):
+#/sbin/modprobe imm
+# Always IN2000 SCSI support:
+#/sbin/modprobe in2000
+# Initio 91XXU(W) SCSI support:
+#/sbin/modprobe initio
+# LSI Logic MegaRAID support (new driver):
+#/sbin/modprobe megaraid_mbox
+# LSI Logic MegaRAID support (legacy driver):
+#/sbin/modprobe megaraid
+# NCR53C8XX SCSI support:
+#/sbin/modprobe sym53c8xx
+# PAS16 SCSI support:
+#/sbin/modprobe pas16
+# IOMEGA parallel port (ppa - older parallel Zip drives):
+#/sbin/modprobe ppa
+# PSI240i support:
+#/sbin/modprobe psi240i
+# Qlogic FastSCSI! cards:
+#/sbin/modprobe qlogicfas
+# QLogic ISP2100 SCSI support:
+#/sbin/modprobe qlogicfc
+# Seagate ST-02 and Future Domain TMC-8xx SCSI support:
+#/sbin/modprobe seagate
+# Symbios Logic sym53c416 support:
+#/sbin/modprobe sym53c416
+# Trantor T128/T128F/T228 SCSI support:
+#/sbin/modprobe t128
+# Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support:
+#/sbin/modprobe tmscsim
+# UltraStor 14F and 34F support (also see driver below):
+#/sbin/modprobe u14-34f
+# UltraStor 14F, 24F, and 34F support:
+#/sbin/modprobe ultrastor
+# Western Digital 7000 SCSI support:
+#/sbin/modprobe wd7000
+
+### Floppy drive support:
+# (Most Linux kernels should already contain this)
+#/sbin/modprobe floppy
+
+### Floppy tape support (such as Colorado Jumbo 250 or other QIC-80 drives):
+#/sbin/modprobe ftape
+
+### IP masquerading modules:
+# These modules are used with IP masquerading, a process which allows you to
+# use a Linux box connected to the Internet (via PPP or SLIP, or some other
+# means) as a gateway for other Linux, Windows, Macintosh boxes on your local
+# network that don't have real IP addresses on the Internet.  The packets
+# going through the Linux machine are "masqueraded", or made to look as if
+# they're all coming from the one real IP address on the Internet.
+#
+# As a quick example (for a much more extensive treatment, see the IP-Masquerade
+# mini-HOWTO) to allow Internet access to a local network 192.168.11.0 with a
+# netmask of 255.255.255.0, you'd use these commands in /etc/rc.d/rc.local:
+#
+#  # EXTERNAL -> external network interface 
+#  # INTERNAL -> internal network interface
+#  EXTERNAL=eth0
+#  INTERNAL=eth1
+#  echo 1 > /proc/sys/net/ipv4/ip_forward
+#  echo "Setting up NAT (Network Address Translation)..."
+#  # by default, nothing is forwarded.
+#  iptables -P FORWARD DROP
+#  # Allow all connections OUT and only related ones IN
+#  iptables -A FORWARD -i $EXTERNAL -o $INTERNAL -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
+#  iptables -A FORWARD -i $INTERNAL -o $EXTERNAL -j ACCEPT
+#  # enable MASQUERADING
+#  iptables -t nat -A POSTROUTING -o $EXTERNAL -j MASQUERADE
+#
+# Then you'd have to set the other boxes on your local network to use the
+# Linux machine as their TCP/IP gateway.  You'll probably also need to plug
+# in the IP address for your Internet service provider in each machine's DNS
+# setup.
+#
+# Now, on to the IP masquerading modules.  The example above is good enough
+# for most things that use TCP in a relatively simple fashion.  It'll work
+# for telnet and http, for instance.  But, the system breaks down when you
+# get protocols that use ports in more complicated ways.  Luckily the Linux
+# kernel gurus have thought of this and have prepared some modules that
+# support masquerading of trickier protocols.  The ipchains command is mighty
+# flexible as well, and a lot of things can be made to work just by setting
+# that up correctly.
+#
+# Special modules for iptables. See also "man iptables" for information about
+# that powerful firewall tool.
+#
+#/sbin/modprobe ipt_conntrack
+#/sbin/modprobe ip_conntrack
+#/sbin/modprobe ip_conntrack_ftp
+#/sbin/modprobe ip_conntrack_irc
+#/sbin/modprobe ip_nat_ftp
+#/sbin/modprobe ip_nat_irc
+#/sbin/modprobe ip_nat_snmp_basic
+
+### CPU frequency scaling support
+#
+# Below, set CPUFREQ to enable CPU frequency scaling to save system power.
+#
+# To always try to use CPU frequency scaling, set to:  on
+# To never use CPU frequency scaling, set to:  off
+# To use it only when the battery module is loaded (this will cause it to
+# be used by default with most laptops), set to:  battery
+#
+CPUFREQ=battery
+
+# If CPUFREQ=battery and the battery module is loaded, turn on CPUfreq.
+if [ "$CPUFREQ" = "battery" ]; then
+  if /sbin/lsmod | grep -wq battery ; then
+    # CPUFREQ=battery and a battery was detected, so change CPUFREQ
+    # to 'on' so that the block of script below will try to enable it.
+    CPUFREQ=on
+  fi
+fi
+
+### Enable CPU frequency scaling if requested:
+if [ "$CPUFREQ" = "on" ]; then
+  ### CPU frequency scaling modules for the Linux kernel CPUfreq subsystem.
+  #
+  # Clock scaling allows you to change the clock speed of the CPUs on the fly.
+  # This is a nice method to save battery power, because the lower the clock
+  # speed is, the less power the CPU consumes.
+  # 
+  # It should not hurt anything to try to load these modules.
+  #
+  # generic ACPI P-States based driver:
+  /sbin/modprobe acpi-cpufreq 2>/dev/null
+  # AMD mobile K6-2/3+ PowerNow!:
+  /sbin/modprobe powernow-k6 2>/dev/null
+  # AMD mobile Athlon PowerNow!:
+  /sbin/modprobe powernow-k7 2>/dev/null
+  # AMD Cool&Quiet PowerNow!:
+  /sbin/modprobe powernow-k8 2>/dev/null
+  # Intel SpeedStep using the SMI BIOS interface:
+  /sbin/modprobe speedstep-smi 2>/dev/null
+  # Intel SpeedStep on ICH-based chipsets:
+  /sbin/modprobe speedstep-ich 2>/dev/null
+  # Intel Enhanced SpeedStep :
+  /sbin/modprobe speedstep-centrino 2>/dev/null
+  # Intel Pentium4/Xeon clock modulation is not enabled by default.
+  # The kernel documentation says "This adds the CPUFreq driver for Intel
+  # Pentium 4 / XEON processors.  When enabled it will lower CPU temperature
+  # by skipping clocks.  This driver should be only used in exceptional
+  # circumstances when very low power is needed because it causes severe
+  # slowdowns and noticeable latencies.  Normally Speedstep should be used
+  # instead."
+  # If you still want to try the Pentium4/Xeon module, uncomment the next line:
+  #/sbin/modprobe p4-clockmod 2>/dev/null
+  # NatSemi Geode GX / Cyrix MediaGXm:
+  /sbin/modprobe gx-suspmod  2>/dev/null
+  # Transmeta Crusoe / Efficeon LongRun:
+  /sbin/modprobe longrun  2>/dev/null
+  # VIA Cyrix Longhaul:
+  /sbin/modprobe longhaul  2>/dev/null
+  # nForce2 FSB changing cpufreq driver:
+  /sbin/modprobe cpufreq-nforce2 2>/dev/null
+  # Enhanced PowerSaver driver for VIA C7 CPUs:
+  /sbin/modprobe e_powersaver 2>/dev/null
+
+  ### CPU frequency scaling policies:
+  #
+  # Use the CPUFreq governor 'powersave' as default.  This sets the
+  # frequency statically to the lowest frequency supported by the CPU.
+  #/sbin/modprobe cpufreq_powersave
+  #
+  # Use the CPUFreq governor 'performance' as default. This sets the
+  # frequency statically to the highest frequency supported by the CPU.
+  #/sbin/modprobe cpufreq_performance
+  #
+  # Use the CPUFreq governor 'conservative' as default.  This allows you
+  # to get a full dynamic frequency capable system by simply loading your
+  # cpufreq low-level hardware driver.  Be aware that not all cpufreq
+  # drivers support the 'conservative' governor -- the fallback governor
+  # will be the 'performance' governor.
+  #/sbin/modprobe cpufreq_conservative
+  #
+  # Use the CPUFreq governor 'ondemand' as default.  This allows you to
+  # get a full dynamic frequency capable system by simply loading your
+  # cpufreq low-level hardware driver.  Be aware that not all cpufreq
+  # drivers support the 'ondemand' governor -- the fallback governor will
+  # be the performance governor.  This seems to be the most-recommended
+  # scaling policy, so rc.modules will try to load this by default.
+  /sbin/modprobe cpufreq_ondemand 2>/dev/null
+
+  ### CPU scaling governor:
+  #
+  # Set the default scaling_governor to be used (such as userspace or ondemand)
+  # if there is a CPUFreq scaling policy module loaded that supports it:
+  SCALING_GOVERNOR=ondemand
+  #
+  # Try to enable the scaling_governor selected above:
+  if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ]; then
+    if grep -wq "$SCALING_GOVERNOR" /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ; then
+      if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
+        for SYSCPUFILE in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do
+          echo "$SCALING_GOVERNOR" > $SYSCPUFILE
+        done
+      fi
+    fi
+  fi
+
+fi # End enabling CPU scaling support
+
+# We are done with these variables now:
+unset NEWMODS RELEASE CPUFREQ SCALING_GOVERNOR SYSCPUFILE
+
diff --git a/source/k/packaging-x86/kernel-modules/slack-desc b/source/k/packaging-x86/kernel-modules/slack-desc
new file mode 100644
index 00000000..fea61c79
--- /dev/null
+++ b/source/k/packaging-x86/kernel-modules/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kernel-modules: kernel-modules (single CPU Linux kernel modules)
+kernel-modules:
+kernel-modules: A kernel module is a piece of object code that can be dynamically
+kernel-modules: loaded into the Linux kernel to provide new kernel functions.  Most of
+kernel-modules: these modules provide support for devices such as CD-ROM drives, tape
+kernel-modules: drives, and ethernet cards.  You can choose which modules to load by
+kernel-modules: editing /etc/rc.d/rc.modules.
+kernel-modules:
+kernel-modules:
+kernel-modules:
+kernel-modules:
diff --git a/source/k/packaging-x86_64/kernel-generic/kernel-generic.SlackBuild b/source/k/packaging-x86_64/kernel-generic/kernel-generic.SlackBuild
new file mode 100755
index 00000000..88afa3c5
--- /dev/null
+++ b/source/k/packaging-x86_64/kernel-generic/kernel-generic.SlackBuild
@@ -0,0 +1,100 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+KERNNAME=generic
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-x86_64}
+KARCH=${KARCH:-x86}
+BUILD=${BUILD:-1}
+
+TMP=${TMP:-/tmp}
+CWD=$(pwd)
+PKG=$TMP/package-kernel
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/${KARCH}/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/kernel-$KERNNAME-$(echo ${VERSION} | tr - _)-$ARCH-$BUILD.txz
+
diff --git a/source/k/kernel-generic/slack-desc b/source/k/packaging-x86_64/kernel-generic/slack-desc
index 569a0189..569a0189 100644
--- a/source/k/kernel-generic/slack-desc
+++ b/source/k/packaging-x86_64/kernel-generic/slack-desc
diff --git a/source/k/packaging-x86_64/kernel-huge/kernel-huge.SlackBuild b/source/k/packaging-x86_64/kernel-huge/kernel-huge.SlackBuild
new file mode 100755
index 00000000..6ff23395
--- /dev/null
+++ b/source/k/packaging-x86_64/kernel-huge/kernel-huge.SlackBuild
@@ -0,0 +1,100 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+KERNNAME=huge
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-x86_64}
+KARCH=${KARCH:-x86}
+BUILD=${BUILD:-1}
+
+TMP=${TMP:-/tmp}
+CWD=$(pwd)
+PKG=$TMP/package-kernel
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# First try to find the loot in the current dir, then look
+# in /usr/src/linux-$VERSION:
+if [ -r $CWD/bzImage ]; then
+  KERNEL=$CWD/bzImage
+elif [ -r $CWD/vmlinuz ]; then
+  KERNEL=$CWD/vmlinuz
+elif [ -r $CWD/vmlinuz* ]; then
+  KERNEL=$CWD/vmlinuz*
+else 
+  KERNEL=/usr/src/linux-$VERSION/arch/${KARCH}/boot/bzImage
+fi
+
+if [ -r $CWD/System.map.gz ]; then
+  gzip -d $CWD/System.map.gz
+elif [ -r $CWD/System.map.bz2 ]; then
+  bzip2 -d $CWD/System.map.bz2
+fi
+
+if [ -r $CWD/System.map ]; then
+  SYSMAP=$CWD/System.map
+elif [ -r $CWD/System.map* ]; then
+  SYSMAP=$CWD/System.map*
+else
+  SYSMAP=/usr/src/linux-$VERSION/System.map
+fi
+if [ -r $CWD/config ]; then
+  CONFIG=$CWD/config
+elif [ -r $CWD/config* ]; then
+  CONFIG=$CWD/config*
+elif [ -r $CWD/.config ]; then
+  CONFIG=$CWD/.config
+else
+  CONFIG=/usr/src/linux-$VERSION/.config
+fi
+
+cat << EOF
+Building kernel-$KERNNAME-${VERSION}-$ARCH-$BUILD.txz
+using these source files.  Please check and then hit 
+enter to make the package.
+
+KERNEL = $KERNEL
+SYSMAP = $SYSMAP
+CONFIG = $CONFIG
+
+EOF
+read junk;
+
+rm -rf $PKG
+mkdir -p $PKG
+mkdir -p $PKG/boot
+cp $KERNEL $PKG/boot/vmlinuz-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf vmlinuz-$KERNNAME-${VERSION} vmlinuz )
+cp $SYSMAP $PKG/boot/System.map-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf System.map-$KERNNAME-${VERSION} System.map )
+cp $CONFIG $PKG/boot/config-$KERNNAME-${VERSION}
+( cd $PKG/boot ; ln -sf config-$KERNNAME-${VERSION} config )
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/kernel-$KERNNAME-$(echo ${VERSION} | tr - _)-$ARCH-$BUILD.txz
+
diff --git a/source/k/kernel-huge/slack-desc b/source/k/packaging-x86_64/kernel-huge/slack-desc
index c360f47c..c360f47c 100644
--- a/source/k/kernel-huge/slack-desc
+++ b/source/k/packaging-x86_64/kernel-huge/slack-desc
diff --git a/source/k/packaging-x86_64/kernel-modules/kernel-modules.SlackBuild b/source/k/packaging-x86_64/kernel-modules/kernel-modules.SlackBuild
new file mode 100755
index 00000000..94264ff0
--- /dev/null
+++ b/source/k/packaging-x86_64/kernel-modules/kernel-modules.SlackBuild
@@ -0,0 +1,84 @@
+#!/bin/sh
+
+# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-3.2.29}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-kernel-modules
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+echo "Using /lib/modules/${VERSION}/"
+echo "Make sure these are *ready*... compressed, or not."
+echo "However you want 'em."
+sleep 5
+mkdir -p $PKG/lib/modules
+cp -a /lib/modules/${VERSION} $PKG/lib/modules
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.modules.new > $PKG/etc/rc.d/rc.modules-${VERSION}.new
+chmod 755 $PKG/etc/rc.d/rc.modules-${VERSION}.new
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Write out the doinst.sh:
+cat << EOF > $PKG/install/doinst.sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/rc.d/rc.modules-${VERSION}.new
+
+# If rc.modules is a real file, back it up:
+if [ -r etc/rc.d/rc.modules -a ! -L etc/rc.d/rc.modules ]; then
+  cp -a etc/rc.d/rc.modules etc/rc.d/rc.modules.bak 
+fi
+# Make rc.modules a symlink if it's not already, but do not replace
+# an existing symlink.  You'll have to decide to point at a new version
+# of this script on your own...
+if [ ! -L etc/rc.d/rc.modules ]; then
+  ( cd etc/rc.d ; rm -rf rc.modules )
+  ( cd etc/rc.d ; ln -sf rc.modules-${VERSION} rc.modules )
+fi
+
+# A good idea whenever kernel modules are added or changed:
+if [ -x sbin/depmod ]; then
+  chroot . /sbin/depmod -a ${VERSION} 1> /dev/null 2> /dev/null
+fi
+
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/kernel-modules-$(echo ${VERSION} | tr - _)-$ARCH-$BUILD.txz
+
diff --git a/source/k/packaging-x86_64/kernel-modules/rc.modules.new b/source/k/packaging-x86_64/kernel-modules/rc.modules.new
new file mode 100755
index 00000000..cb1fbec6
--- /dev/null
+++ b/source/k/packaging-x86_64/kernel-modules/rc.modules.new
@@ -0,0 +1,924 @@
+#!/bin/sh
+# rc.modules 12.3456789  Sun May 10 05:31:26 UTC 2009  pp (rb), pjv, rlw
+#
+# This file loads extra drivers into the Linux kernel.
+#
+# The modules will be looked for under /lib/modules/<kernel version number>
+# On systems using udev, this file should remain mostly commented out.  
+# Nearly all hardware device modules will be loaded automatically on such 
+# systems.  This file should only be used when udev is not loading a module 
+# that you require, or if you are not using udev (which is going to become 
+# increasingly impossible...), or if you want to force a particular module 
+# to be loaded where alternatives exist.
+#
+# Many Linux kernel modules will accept extra options.  The Linux kernel
+# source is the best place to look for extra documentation for the various
+# modules.  This can be found under /usr/src/linux/Documentation if you've
+# the installed the kernel sources. 
+#
+# NOTE:  This may not be a complete list of modules.  If you don't see what
+# you're looking for, look around in /lib/modules/2.x.x/ for an appropriate
+# module.  Also, if any problems arise loading or using these modules, try
+# compiling and installing a custom kernel that contains the support instead.
+# That always works. ;^)
+
+# Determine the version of the running kernel:
+RELEASE=$(uname -r)
+
+### Update module dependencies ###
+# If /usr is mounted and we have 'find', we can try to take a shortcut:
+if [ -x /usr/bin/find -a -e /lib/modules/$RELEASE/modules.dep \
+     -a /lib/modules/$RELEASE/modules.dep -nt /etc/modules.conf ]; then
+  NEWMODS="$(/usr/bin/find /lib/modules/$RELEASE -mindepth 2 -type f -newer /lib/modules/$RELEASE/modules.dep)"
+  # Only rebuild dependencies if new module(s) are found:
+  if [ ! "" = "$NEWMODS" ]; then
+    echo "Updating module dependencies for Linux $RELEASE:"
+    /sbin/depmod -a
+  else
+    echo "Module dependencies up to date (no new kernel modules found)."
+  fi
+else # we don't have find, or there is no existing modules.dep, or it is out of date.
+  echo "Updating module dependencies for Linux $RELEASE:"
+  /sbin/depmod -A
+fi
+
+### Mouse support:
+# PS/2 mouse support:
+# The default in Slackware is to use proto=imps because that works with the
+# most types of mice out of the box.  For example, using proto=any will
+# completely break the mouse if you change consoles with several models of KVM
+# switches.
+#
+# This is commented out here because a better place to configure the options
+# for the psmouse module is in /etc/modprobe.d/psmouse.
+#
+#/sbin/modprobe psmouse proto=imps
+#
+# Serial (RS-232, COM port) mouse support:
+#/sbin/modprobe sermouse
+#
+# Microsoft/ATI XL busmouse support:
+# Microsoft busmouse (also called Inport mice) is connected to an 
+# expansion board using a round connector with 9 pins.  Be aware that 
+# several vendors talk about 'Microsoft busmouse' and actually mean 
+# PS/2 busmouse -- so count the pins on the connector.  This driver
+# also supports the ATIXL mouse, a rare mouse that is connected to the
+# back of an ATI video card:
+#/sbin/modprobe inport 
+#
+# Logitech mouse connected to a proprietary interface card. It's
+# generally a round connector with 9 pins.  Note that the newer mice
+# made by Logitech don't use the Logitech protocol anymore; for those,
+# you don't need this module:
+#/sbin/modprobe logibm 
+#
+# IBM PC110 palmtop digitizer pad:
+#/sbin/modprobe pc110pad
+
+#### ACPI support ###
+# Advanced Configuration and Power Interface (ACPI) support for Linux
+# requires an ACPI compliant platform (hardware/firmware), and assumes
+# the presence of OS-directed configuration and power management (OSPM)
+# software.  Linux ACPI provides a robust functional replacement for
+# several legacy configuration and power management interfaces, including
+# the Plug-and-Play BIOS specification (PnP BIOS), the MultiProcessor
+# Specification (MPS), and the Advanced Power Management (APM)
+# specification.  If both ACPI and APM support are configured, whichever
+# is loaded first shall be used.  Also note that in many cases udev will
+# load the required modules if ACPI is found to be active.
+# ACPI can be disabled with the "noacpi" boot option.
+# Also note that ACPI is blacklisted with our default kernel
+# configurations on machines with a BIOS older than 2001-01-01.  If you
+# still want to try it, you'll need to use the "acpi=force" boot option.
+#
+# AC Adapter (indicates whether a system is on AC, or not):
+#/sbin/modprobe ac
+#
+# Battery (adds battery information through/proc/acpi/battery):
+#/sbin/modprobe battery
+#
+# Button (handles events on the power, sleep and lid buttons):
+#/sbin/modprobe button
+#
+# Video.  This driver implements the ACPI Extensions For Display Adapters
+# for integrated graphics devices on motherboard, as specified in ACPI 2.0
+# Specification, Appendix B, allowing some basic control like defining the
+# video POST device, retrieving EDID information, or to setup a video output.
+# Note that this is an reference implementation only, and it may or may not
+# work for your integrated video device.
+#/sbin/modprobe video
+#
+# Fan (adds support for ACPI fan control and status):
+#/sbin/modprobe fan
+#
+# Dock (adds support for ACPI controlled docking stations):
+#/sbin/modprobe dock
+#
+# Bay (adds support for ACPI controlled removable drive bays such as the
+# IBM UltraBay or the Dell Module Bay):
+#/sbin/modprobe bay
+#
+# Processor.  This driver installs ACPI as the idle handler for Linux, and
+# uses ACPI C2 and C3 processor states to save power, on systems that
+# support it.  It is required by several flavors of cpufreq Performance-
+# state drivers.
+#/sbin/modprobe processor
+#
+# Thermal.  This driver adds support for ACPI thermal zones.  Most mobile and
+# some desktop systems support ACPI thermal zones.  It is HIGHLY recommended
+# that this option be enabled, as your processor(s) may be damaged without it.
+#/sbin/modprobe thermal
+#
+# Memory.  This driver adds support for ACPI Memory Hotplug.  This driver
+# provides support for fielding notifications on ACPI memory devices
+# (PNP0C80) which represent memory ranges that may be onlined or offlined
+# during runtime.  Enabling this driver assumes that your platform hardware
+# and firmware have support for hot-plugging physical memory.  If your
+# system does not support physically adding or ripping out memory DIMMs at
+# some platform defined granularity (individually or as a bank) at runtime,
+# then you need not enable this driver.
+#/sbin/modprobe memory
+#
+# Container (EXPERIMENTAL -- allows _physical_ insertion and removal of CPUs
+# and memory on machines that support it):
+#/sbin/modprobe container
+#
+# ASUS/Medion Laptop Extras.  This driver provides support for extra features
+# of ACPI-compatible ASUS laptops.  As some of Medion laptops are made by
+# ASUS, it may also support some Medion laptops (such as 9675 for example).
+# It makes all the extra buttons generate standard ACPI events that go through
+# /proc/acpi/events, and (on some models) adds support for changing the
+# display brightness and output, switching the LCD backlight on and off, and,
+# most importantly, allows you to blink those fancy LEDs intended for
+# reporting mail and wireless status.  All settings are changed via
+# /proc/acpi/asus directory entries.  Owner and group for these entries can be
+# set with asus_uid and asus_gid module parameters.
+# More information and a userspace daemon for handling the extra buttons:
+# http://sourceforge.net/projects/acpi4asus/
+#/sbin/modprobe asus_acpi
+#
+# ThinkPad ACPI Laptop Extras.  This is a driver for the IBM and Lenovo
+# ThinkPad laptops.  It adds support for Fn-Fx key combinations, Bluetooth
+# control, video output switching, ThinkLight control, UltraBay eject and
+# more.  For more information about this driver see:
+# Documentation/thinkpad-acpi.txt and http://ibm-acpi.sf.net/
+#/sbin/modprobe thinkpad_acpi
+#
+# Toshiba Laptop Extras.  This driver adds support for access to certain
+# system settings on "legacy free" Toshiba laptops.  These laptops can be
+# recognized by their lack of a BIOS setup menu and APM support.  On these
+# machines, all system configuration is handled through the ACPI.  This
+# driver is required for access to controls not covered by the general ACPI
+# drivers, such as LCD brightness and video output.  Configuration is
+# accessed by reading and writing text files in the /proc tree.  Furthermore,
+# no power management functions are exposed, as those are handled by the
+# general ACPI drivers.
+# More information about this driver is available at:
+# http://memebeam.org/toys/ToshibaAcpiDriver
+#/sbin/modprobe toshiba_acpi
+#
+#
+# See also the ACPI CPU frequency scaling driver in the "CPU frequency
+# scaling modules" section below.
+
+#### APM support ###
+# APM is a BIOS specification for saving power using several different
+# techniques.  This is mostly useful for battery powered laptops.
+# If a kernel supports ACPI it will always be built in, not a module.
+# APM is considered obsolete on newer hardware -- most things have ACPI.
+#/sbin/modprobe apm
+
+# Enable PC speaker support:
+#/sbin/modprobe pcspkr
+
+### Built-in PC parallel port support ###
+# Generic setup example.  Attempt to load by default, since it usually
+# won't hurt.  Some (most?) people may want to comment the line below
+# and look into better functioning and performing hardware specific
+# options as described later on in this section.
+#
+/sbin/modprobe -q parport_pc 2> /dev/null
+# Hardware specific setup example  (PLIP requires an IRQ, and the
+# ECP protocol requires a DMA channel)
+# This may also give better performance in general.
+#/sbin/modprobe parport_pc io=0x378 irq=7 dma=1
+
+### PCI parallel/serial card support:
+# If your serial/parallel ports are on a PCI card, uncomment the
+# line below and comment the section above that loads parport_pc.
+#/sbin/modprobe parport_serial
+
+### Parallel printer support ###
+# This should be safe to try to load by default.
+/sbin/modprobe -q lp 2> /dev/null
+
+### Parallel port IP ###
+#/sbin/modprobe plip
+
+### Filesystem Quota support ###
+if /bin/grep -q quota /etc/fstab ; then
+  # /sbin/modprobe quota_v1
+  /sbin/modprobe quota_v2
+fi
+
+### AGP (Accelerated Graphics Port) GART support ###
+# This module takes care of programming the GART (part of your motherboard's
+# chipset that handles gathering data from memory and passing it to the
+# card) and enables faster AGP transfers.  The AGP GART module is required
+# to use AGP features of your 3D rendering video card.  You'll need this to
+# with most cards (nVidia's official drivers that include their own GART
+# support being a notable exception) to use X11's direct rendering support.
+/sbin/modprobe agpgart 2> /dev/null
+
+### non-IDE CD-ROM drive support ###
+# These modules add CD-ROM drive support.  Most of these drivers will probe
+# for the I/O address and IRQ of the drive automatically if the parameters
+# to configure them are omitted. Typically the I/O address will be specified 
+# in hexadecimal, e.g.: cm206=0x300,11
+#
+# ***NONE*** of these drivers are for use with IDE/ATAPI CD-ROM drives.  That
+# support is already built into every pre-compiled Slackware Linux kernel.
+# Also, note that all of the manufacturers listed below stopped making these
+# types of wacky-interface drives years ago and all make IDE/ATAPI-interface
+# CD-ROM drives now.  So, just because your drive says "Mitsumi" on it is not 
+# reason enough to think you need the special Mitsumi module loaded, etc.  If
+# you got your drive within the last couple of years it's probably IDE.  Try 
+# tossing a disc in the drive and mounting it on the various IDE interfaces it
+# could be using, like /dev/hdc. 
+# 
+#/sbin/modprobe aztcd aztcd=<I/O address>
+#/sbin/modprobe cdu31a cdu31a_port=<I/O address> cdu31a_irq=<interrupt>
+#/sbin/modprobe cm206 cm206=<I/O address>,<IRQ>
+#/sbin/modprobe gscd gscd=<I/O address>
+#/sbin/modprobe mcdx mcdx=<I/O address>,<IRQ>
+#/sbin/modprobe optcd optcd=<I/O address>
+# Below, this last number is "1" for SoundBlaster Pro card, or "0" for a clone.
+#/sbin/modprobe sbpcd sbpcd=<I/O address>,1
+#/sbin/modprobe sjcd sjcd=<I/O address>
+#/sbin/modprobe sonycd535 sonycd535=<I/O address>
+
+# CD-ROM drives on ISP16, MAD16 or Mozart sound card:
+#/sbin/modprobe isp16 isp16_cdrom_base=<port> isp16_cdrom_irq=<irq> isp16_cdrom_dma=<dma> isp16_cdrom_type=<drive_type>
+#  where the values are one of: port=0x340,0x320,0x330,0x360
+#                               irq=0,3,5,7,9,10,11
+#                               dma=0,3,5,6,7
+#                               drive_type=noisp16,Sanyo,Panasonic,Sony,Mitsumi
+
+### Cyclades multiport serial card support ###
+#/sbin/modprobe cyclades
+
+#### Serial line IP support (SLIP/CSLIP/PPP) ###
+## This module is for SLIP/CSLIP support:
+#/sbin/modprobe slip
+
+## Load PPP:
+# This module is for PPP support:
+#/sbin/modprobe ppp_generic
+# This PPP plugin supports PPP over serial lines:
+#/sbin/modprobe ppp_async
+# Use this plugin instead for HDLC (used for high-speed leased lines like T1/E1)
+#/sbin/modprobe ppp_synctty
+
+## This module provides compression for PPP (optional):
+##/sbin/modprobe ppp_deflate
+
+### USB Host Controllers:
+# Enhanced Host Controller Interface (USB 2.0)
+#/sbin/modprobe ehci-hcd
+# Open Host Controller Interface (Compaq/Microsoft/National standard):
+#/sbin/modprobe ohci-hcd
+# Universal Host Controller Interface (Intel/Via standard):
+#/sbin/modprobe uhci-hcd
+# ISP1160/ISP1161 USB Host Controllers
+#/sbin/modprobe isp116x-hcd
+# SL811HS USB Host Controller
+#/sbin/modprobe sl811-hcd
+# SL811HS PCMCIA/CF USB Host Controller
+#/sbin/modprobe sl811_cs
+
+### USB device support:
+# (Note that once you've loaded USB hub support most USB devices will
+# trigger the kernel to load their modules automatically)
+# USB "Human Interface Device" driver; handles most USB mice, joysticks,
+# gamepads, steering wheels, keyboards, trackballs and digitizers.
+#/sbin/modprobe usbhid
+# Simple HIDBP USB mouse driver, if hid doesn't work:
+#/sbin/modprobe usbmouse
+# Simple HIDBP USB keyboard driver, if hid doesn't work:
+#/sbin/modprobe usbkbd
+# Wacom Graphire and Intuos tablet driver:
+#/sbin/modprobe wacom
+# Logitech WingMan Force joystick:
+#/sbin/modprobe iforce
+# USB audio:
+#/sbin/modprobe audio
+# USB modem support:
+#/sbin/modprobe cdc-acm
+# USB serial converter:
+#/sbin/modprobe usbserial
+# USB printer support:
+#/sbin/modprobe usblp 
+# IBM "C-It" USB video camera:
+#/sbin/modprobe ibmcam framerate=1
+# USB OV511 Camera support:
+#/sbin/modprobe ov511
+# USB ADMtek Pegasus-based ethernet device support:
+#/sbin/modprobe pegasus
+# Kawasaki USB ethernet controller support:
+#/sbin/modprobe kaweth
+# USB Mustek MDC800 Digital Camera Support:
+#/sbin/modprobe mdc800
+# USB Mass Storage support:
+#/sbin/modprobe usb-storage
+# USS720 parallel-port driver:
+#/sbin/modprobe uss720
+# Prolific PL-2302 USB-to-USB network device:
+#/sbin/modprobe plusb
+# USB Diamond Rio500 support:
+#/sbin/modprobe rio500
+# D-Link DSB-R100 FM radio support:
+#/sbin/modprobe dsbr100
+# USB Bluetooth support:
+#/sbin/modprobe bluetooth
+
+### USB event drivers:
+# Mouse input:
+#/sbin/modprobe mousedev
+# Joystick input:
+#/sbin/modprobe joydev
+# Generic event reporting device:
+#/sbin/modprobe evdev
+
+### ALSA (Advanced Linux Sound Architecture) support: 
+# Sound Blaster Pro/16 support:
+#/sbin/modprobe snd-sb16 port=0x220 irq=5 dma8=3 dma16=5 mpu_port=0x300
+# Sound Blaster Live support:
+#/sbin/modprobe snd-emu10k1
+# AD1816(A) sound driver:
+#/sbin/modprobe snd-ad1816a port=0x530 irq=5 dma1=1 dma2=3
+# Crystal CS4232 based (PnP) cards:
+#/sbin/modprobe snd-cs4232
+# ES1370 (Ensoniq AudioPCI ES1370) support.  This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1370 chipset), and
+# Ensoniq AudioPCI-97:
+#/sbin/modprobe snd-ens1370
+# ES1371 (Ensoniq AudioPCI ES1371/73) support.  This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1371/73 chipset), Ectiva
+# EV1938, Vibra PCI128, and Ensoniq AudioPCI ES1371/73:
+#/sbin/modprobe snd-ens1371
+# ESS Maestro, Maestro2, Maestro2E:
+#/sbin/modprobe snd-es1968 
+# ESS Maestro3/Allegro:
+#/sbin/modprobe snd-maestro3
+# VIA VT82xx Audio Controller
+#/sbin/modprobe snd-via82xx
+# (For information on configuring other sound cards with Linux,
+# see the documentation in /usr/src/linux/Documentation/sound/,
+# and /usr/src/linux/Documentation/Configure.help.
+
+### Joystick support ###
+# The core joystick input support module, needed by all of the
+# joystick devices below:
+#/sbin/modprobe joydev
+### Next, you must load a module for your gameport.
+# Classic ISA/PnP gameports:
+#/sbin/modprobe ns558
+# SoundBlaster Live! gameports:
+#/sbin/modprobe emu10k1-gp
+# Many soundcards had their gameport support bundled in sound drivers
+### Drivers for various joystick devices ###
+# Analog joysticks and gamepads:
+#/sbin/modprobe analog
+# Assassin 3D and MadCatz Panther devices:
+#/sbin/modprobe a3d
+# Logitech ADI digital joysticks and gamepads:
+#/sbin/modprobe adi
+# Creative Labs Blaster Cobra gamepad:
+#/sbin/modprobe cobra
+# Genius Flight2000 Digital joysticks and gamepads:
+#/sbin/modprobe gf2k
+# Gravis GrIP joysticks and gamepads:
+#/sbin/modprobe grip
+# InterAct digital joysticks and gamepads:
+#/sbin/modprobe interact
+# ThrustMaster DirectConnect joysticks and gamepads:
+#/sbin/modprobe tmdc
+# Microsoft SideWinder digital joysticks and gamepads:
+#/sbin/modprobe sidewinder
+### Serial port game controller support ###
+# Both of these are needed for serial-port game controllers:
+#/sbin/modprobe serio
+#/sbin/modprobe serport
+# Logitech WingMan Warrior joystick:
+#/sbin/modprobe warrior
+# LogiCad3d Magellan/SpaceMouse 6dof controller:
+#/sbin/modprobe magellan
+# SpaceTec SpaceOrb/Avenger 6dof controller:
+#/sbin/modprobe spaceorb
+# SpaceTec SpaceBall 4000 FLX 6dof controller:
+#/sbin/modprobe spaceball
+# Gravis Stinger gamepad:
+#/sbin/modprobe stinger
+# I-Force joysticks/wheels:
+#/sbin/modprobe iforce
+### Parallel port connected controllers ###
+# Multisystem, Sega Genesis, Saturn joysticks and gamepads:
+#/sbin/modprobe db9
+# Multisystem, NES, SNES, N64, PSX joysticks and gamepads:
+#/sbin/modprobe gamecon
+# Multisystem joysticks via TurboGraFX device:
+#/sbin/modprobe turbografx
+
+### Appletalk support ###
+# This is needed if you want to run netatalk, a package which allows
+# you to use you Linux box as a file and print server for Apple Macintosh 
+# computers on your local network.
+#/sbin/modprobe appletalk
+
+### IPX networking support ###
+#/sbin/modprobe ipx
+
+### IDE device support ###
+# IDE CD-ROM drives:
+#/sbin/modprobe ide-cd
+# IDE hard drives:
+#/sbin/modprobe ide-disk
+# IDE floppy drives:
+#/sbin/modprobe ide-floppy
+# IDE tape drives:
+#/sbin/modprobe ide-tape
+
+### Network device support ###
+# Most of these drivers will probe automatically for the card if you don't
+# specify an I/O address and IRQ.  
+#
+# First, if setup probing found a network card, there may be an 'rc.netdevice'
+# file that we should run to load the network module:
+if [ -x /etc/rc.d/rc.netdevice ]; then
+  . /etc/rc.d/rc.netdevice
+fi
+
+### Ethernet cards based on the 8390 chip.
+# 3com 3c503 support:
+#/sbin/modprobe 3c503 
+# Ansel Communications EISA 3200 support:
+#/sbin/modprobe ac3200
+# Cabletron E21xx support:
+#/sbin/modprobe e2100
+# HP PCLAN+ (27247B and 27252A) support:
+#/sbin/modprobe hp-plus
+# HP PCLAN (27245 and other 27xxx series) support:
+#/sbin/modprobe hp
+# NE2000/NE1000 support (non PCI):
+#/sbin/modprobe ne io=0x300 # NE2000 at 0x300
+#/sbin/modprobe ne io=0x280 # NE2000 at 0x280
+#/sbin/modprobe ne io=0x320 # NE2000 at 0x320
+#/sbin/modprobe ne io=0x340 # NE2000 at 0x340
+#/sbin/modprobe ne io=0x360 # NE2000 at 0x360
+# PCI NE2000 clone support:
+#/sbin/modprobe ne2k-pci
+# SMC Ultra support:
+#/sbin/modprobe smc-ultra
+# SMC Ultra32 EISA support:
+#/sbin/modprobe smc-ultra32
+# Western Digital WD80*3 (and clones) support:
+#/sbin/modprobe wd
+#
+# Other network hardware drivers:
+# 
+# 3com 3c501 (consider buying a new card, since the 3c501 is slow,
+# broken, and obsolete):
+#/sbin/modprobe 3c501
+# 3com 3c503:
+#/sbin/modprobe 3c503
+# 3com 3c505:
+#/sbin/modprobe 3c505
+# 3com 3c507:
+#/sbin/modprobe 3c507
+# 3com 3c509 and 3c579:
+#/sbin/modprobe 3c509
+# 3com 3c515:
+#/sbin/modprobe 3c515
+# This one works for all 3com 3c590/3c592/3c595/3c597 and the
+# EtherLink XL 3c900 and 3c905 cards:
+#/sbin/modprobe 3c59x
+# Apricot Xen-II on board Ethernet:
+#/sbin/modprobe apricot
+# Generic ARCnet support:
+#/sbin/modprobe arcnet
+# AT1700/1720 & Fujitsu FMV-181/182/183/184 support:
+#/sbin/modprobe at1700
+# AT-LAN-TEC/RealTek pocket adapter support:
+#/sbin/modprobe atp
+# BPQ Ethernet driver:
+#/sbin/modprobe bpqether
+# Generic DECchip & DIGITAL EtherWORKS PCI/EISA:
+#/sbin/modprobe de4x5
+# D-Link DE600 pocket adapter support:
+#/sbin/modprobe de600
+# D-Link DE620 pocket adapter support:
+#/sbin/modprobe de620
+# DEPCA support:
+#/sbin/modprobe depca
+# Digi International RightSwitch cards:
+#/sbin/modprobe dgrs
+# Intel EtherExpress Pro support:
+#/sbin/modprobe eepro
+# Intel EtherExpress PRO/100 PCI support:
+#/sbin/modprobe eepro100
+# Intel EtherExpress16 support:
+#/sbin/modprobe eexpress
+# SMC EtherPower II 9432 PCI support:
+#/sbin/modprobe epic100
+# ICL EtherTeam 16i/32 support:
+#/sbin/modprobe eth16i
+# DEC EtherWorks 3 support:
+#/sbin/modprobe ewrk3
+# HP 10/100VG PCLAN (ISA, EISA, PCI) support:
+#/sbin/modprobe hp100
+# IBM Tropic chipset based adapter support:
+#/sbin/modprobe ibmtr
+# AMD LANCE and PCnet (AT1500 and NE2100) support:
+#/sbin/modprobe lance
+# National Semiconductor DP8381x series PCI Ethernet support:
+#/sbin/modprobe natsemi
+# NI5210 support:
+#/sbin/modprobe ni52
+# NI6510 support:
+#/sbin/modprobe ni65
+# AMD PCnet32 (VLB and PCI) support:
+#/sbin/modprobe pcnet32
+# Red Creek Hardware Virtual Private Network (VPN) support:
+#/sbin/modprobe rcpci
+# RealTek 8129/8139 (not 8019/8029!) support:
+#/sbin/modprobe 8139too
+# RealTek 8139C+ enhanced support:
+#/sbin/modprobe 8139cp
+# Sangoma S502A FRAD support:
+#/sbin/modprobe sdla
+# SMC 9194 support:
+#/sbin/modprobe smc9194
+# TI ThunderLAN support:
+#/sbin/modprobe tlan
+# DECchip Tulip (dc21x4x) PCI support:
+#/sbin/modprobe tulip
+# VIA Rhine support:
+#/sbin/modprobe via-rhine
+# AT&T WaveLAN & DEC RoamAbout DS support:
+#/sbin/modprobe wavelan
+# Packet Engines Yellowfin Gigabit-NIC support:
+#/sbin/modprobe yellowfin
+# Davicom DM9xxx (9102/9132/9100/9802...)
+#/sbin/modprobe dmfe
+# SiS 900/7016 PCI Fast Ethernet
+#/sbin/modprobe sis900
+
+### Serial line load balancing support ###
+#/sbin/modprobe eql
+
+### "dummy" IP support ###
+# A dummy IP driver.  Essentially a loopback device.  Can be useful --
+# see the Network Administrator's Guide from sunsite.unc.edu:/pub/Linux/docs/LDP
+#/sbin/modprobe dummy
+
+### ISDN kernel support ###
+#/sbin/modprobe isdn
+# ISDN loop (provides a virtual ISDN card for testing):
+#/sbin/modprobe isdnloop
+
+### ISDN interface support ###
+# AVM-B1 with CAPI2.0 driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.avmb1):
+#/sbin/modprobe capidrv
+# HiSax SiemensChipSet driver (supports AVM A1, Elsa ISDN cards, 
+# Teles S0-16.0, Teles S0-16.3, Teles S0-8, Teles/Creatix PnP,
+# ITK micro ix1 and many compatibles):
+#/sbin/modprobe hisax
+# IBM Active 2000 ISDN card support (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.act2000 for more information)
+#/sbin/modprobe act2000
+# ICN active ISDN card driver:
+#/sbin/modprobe icn
+# PCBIT-D driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.pcbit for more information)
+#/sbin/modprobe pcbit
+# Spellcaster BRI ISDN driver:
+#/sbin/modprobe sc
+
+### Binary format support ###
+#/sbin/modprobe binfmt_aout
+#/sbin/modprobe binfmt_elf
+#/sbin/modprobe binfmt_java
+#/sbin/modprobe binfmt_misc
+
+### Filesystem support ###
+#/sbin/modprobe adfs
+#/sbin/modprobe affs
+#/sbin/modprobe autofs4
+#/sbin/modprobe coda
+#/sbin/modprobe cramfs
+#/sbin/modprobe exportfs
+#/sbin/modprobe ext2
+#/sbin/modprobe ext3
+#/sbin/modprobe fat
+#/sbin/modprobe fuse
+#/sbin/modprobe hfs
+#/sbin/modprobe hfsplus
+#/sbin/modprobe hpfs
+#/sbin/modprobe intermezzo
+#/sbin/modprobe isofs
+#/sbin/modprobe jfs
+#/sbin/modprobe minix
+#/sbin/modprobe msdos
+#/sbin/modprobe ncpfs
+#/sbin/modprobe nfs
+#/sbin/modprobe ntfs
+#/sbin/modprobe ocfs2
+#/sbin/modprobe qnx4
+#/sbin/modprobe reiserfs
+#/sbin/modprobe relayfs
+#/sbin/modprobe romfs
+#/sbin/modprobe smbfs
+#/sbin/modprobe sysfs
+#/sbin/modprobe sysv
+#/sbin/modprobe tmpfs
+#/sbin/modprobe udf
+#/sbin/modprobe ufs
+#/sbin/modprobe umsdos
+#/sbin/modprobe usbfs
+#/sbin/modprobe vfat
+#/sbin/modprobe xfs
+
+### RAID (Multiple Devices) support ###
+#/sbin/modprobe linear
+#/sbin/modprobe raid0
+#/sbin/modprobe raid1
+#/sbin/modprobe raid5
+
+# Note: this *IS NOT* needed to burn discs with 2.6.x or newer kernels.
+#
+# SCSI emulation support.  This will provide SCSI host adapter emulation
+# for IDE ATAPI devices, and will allow you to use a SCSI device driver
+# instead of a native ATAPI driver.  This is useful if you have an ATAPI
+# device for which no native driver has been written (for example, an ATAPI
+# PD-CD, CD-RW, or DVD-RW drive);  you can then use this emulation together
+# with an # appropriate SCSI device driver.  Note that this option does not
+# allow you to attach SCSI devices to a box that doesn't have a SCSI host
+# adapter installed.  :-)  Also, you'll need to tell the ide-scsi module
+# which device is your burner so that the normal ATAPI driver won't grab it
+# first.  This is done by passing a flag to the kernel at boot time.
+# If you're using LILO, add this:  append="hdc=ide-scsi"
+# Replace "hdc" with the appropriate device name.
+#
+#/sbin/modprobe ide-scsi
+
+### SCSI kernel support:
+#/sbin/modprobe scsi_mod
+#/sbin/modprobe scsi_syms
+#/sbin/modprobe sd_mod
+#/sbin/modprobe sg
+#/sbin/modprobe sr_mod
+#/sbin/modprobe st
+
+### SCSI controller support:
+# NCR53c7xx SCSI support: 
+#/sbin/modprobe 53c7xx
+# BusLogic MultiMaster and FlashPoint SCSI support:
+#/sbin/modprobe BusLogic
+# NCR53c406a SCSI support:
+#/sbin/modprobe NCR53c406a
+# Initio INI-A100U2W SCSI support:
+#/sbin/modprobe a100u2w
+# AdvanSys SCSI support:
+#/sbin/modprobe advansys 
+# Adaptec AHA152X/2825 support:
+#/sbin/modprobe aha152x
+# Adaptec AHA1542 support:
+#/sbin/modprobe aha1542
+# Adaptec AHA1740 support:
+#/sbin/modprobe aha1740
+# This is support for the various aic7xxx based Adaptec SCSI
+# controllers. These include the 274x EISA cards; 284x VLB cards;
+# 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+# motherboard based SCSI controllers from Adaptec:
+#/sbin/modprobe aic7xxx
+# ACARD 870U/W SCSI support:
+#/sbin/modprobe atp870u
+# DTC 3180/3280 SCSI support:
+#/sbin/modprobe dtc
+# EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support:
+#/sbin/modprobe eata
+# EATA-PIO (old DPT PM2001, PM2012A) support:
+#/sbin/modprobe eata_pio
+# Future Domain 16xx SCSI/AHA-2920A support:
+#/sbin/modprobe fdomain
+# Generic NCR5380/53c400 SCSI support:
+#/sbin/modprobe g_NCR5380
+# GDT SCSI Disk Array Controller support:
+#/sbin/modprobe gdth
+# IOMEGA parallel port (imm - newer drives like ZipPlus):
+#/sbin/modprobe imm
+# Always IN2000 SCSI support:
+#/sbin/modprobe in2000
+# Initio 91XXU(W) SCSI support:
+#/sbin/modprobe initio
+# LSI Logic MegaRAID support (new driver):
+#/sbin/modprobe megaraid_mbox
+# LSI Logic MegaRAID support (legacy driver):
+#/sbin/modprobe megaraid
+# NCR53C8XX SCSI support:
+#/sbin/modprobe sym53c8xx
+# PAS16 SCSI support:
+#/sbin/modprobe pas16
+# IOMEGA parallel port (ppa - older parallel Zip drives):
+#/sbin/modprobe ppa
+# PSI240i support:
+#/sbin/modprobe psi240i
+# Qlogic FastSCSI! cards:
+#/sbin/modprobe qlogicfas
+# QLogic ISP2100 SCSI support:
+#/sbin/modprobe qlogicfc
+# Seagate ST-02 and Future Domain TMC-8xx SCSI support:
+#/sbin/modprobe seagate
+# Symbios Logic sym53c416 support:
+#/sbin/modprobe sym53c416
+# Trantor T128/T128F/T228 SCSI support:
+#/sbin/modprobe t128
+# Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support:
+#/sbin/modprobe tmscsim
+# UltraStor 14F and 34F support (also see driver below):
+#/sbin/modprobe u14-34f
+# UltraStor 14F, 24F, and 34F support:
+#/sbin/modprobe ultrastor
+# Western Digital 7000 SCSI support:
+#/sbin/modprobe wd7000
+
+### Floppy drive support:
+# (Most Linux kernels should already contain this)
+#/sbin/modprobe floppy
+
+### Floppy tape support (such as Colorado Jumbo 250 or other QIC-80 drives):
+#/sbin/modprobe ftape
+
+### IP masquerading modules:
+# These modules are used with IP masquerading, a process which allows you to
+# use a Linux box connected to the Internet (via PPP or SLIP, or some other
+# means) as a gateway for other Linux, Windows, Macintosh boxes on your local
+# network that don't have real IP addresses on the Internet.  The packets
+# going through the Linux machine are "masqueraded", or made to look as if
+# they're all coming from the one real IP address on the Internet.
+#
+# As a quick example (for a much more extensive treatment, see the IP-Masquerade
+# mini-HOWTO) to allow Internet access to a local network 192.168.11.0 with a
+# netmask of 255.255.255.0, you'd use these commands in /etc/rc.d/rc.local:
+#
+#  # EXTERNAL -> external network interface 
+#  # INTERNAL -> internal network interface
+#  EXTERNAL=eth0
+#  INTERNAL=eth1
+#  echo 1 > /proc/sys/net/ipv4/ip_forward
+#  echo "Setting up NAT (Network Address Translation)..."
+#  # by default, nothing is forwarded.
+#  iptables -P FORWARD DROP
+#  # Allow all connections OUT and only related ones IN
+#  iptables -A FORWARD -i $EXTERNAL -o $INTERNAL -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
+#  iptables -A FORWARD -i $INTERNAL -o $EXTERNAL -j ACCEPT
+#  # enable MASQUERADING
+#  iptables -t nat -A POSTROUTING -o $EXTERNAL -j MASQUERADE
+#
+# Then you'd have to set the other boxes on your local network to use the
+# Linux machine as their TCP/IP gateway.  You'll probably also need to plug
+# in the IP address for your Internet service provider in each machine's DNS
+# setup.
+#
+# Now, on to the IP masquerading modules.  The example above is good enough
+# for most things that use TCP in a relatively simple fashion.  It'll work
+# for telnet and http, for instance.  But, the system breaks down when you
+# get protocols that use ports in more complicated ways.  Luckily the Linux
+# kernel gurus have thought of this and have prepared some modules that
+# support masquerading of trickier protocols.  The ipchains command is mighty
+# flexible as well, and a lot of things can be made to work just by setting
+# that up correctly.
+#
+# Special modules for iptables. See also "man iptables" for information about
+# that powerful firewall tool.
+#
+#/sbin/modprobe ipt_conntrack
+#/sbin/modprobe ip_conntrack
+#/sbin/modprobe ip_conntrack_ftp
+#/sbin/modprobe ip_conntrack_irc
+#/sbin/modprobe ip_nat_ftp
+#/sbin/modprobe ip_nat_irc
+#/sbin/modprobe ip_nat_snmp_basic
+
+### CPU frequency scaling support
+#
+# Below, set CPUFREQ to enable CPU frequency scaling to save system power.
+#
+# To always try to use CPU frequency scaling, set to:  on
+# To never use CPU frequency scaling, set to:  off
+# To use it only when the battery module is loaded (this will cause it to
+# be used by default with most laptops), set to:  battery
+#
+CPUFREQ=battery
+
+# If CPUFREQ=battery and the battery module is loaded, turn on CPUfreq.
+if [ "$CPUFREQ" = "battery" ]; then
+  if /sbin/lsmod | grep -wq battery ; then
+    # CPUFREQ=battery and a battery was detected, so change CPUFREQ
+    # to 'on' so that the block of script below will try to enable it.
+    CPUFREQ=on
+  fi
+fi
+
+### Enable CPU frequency scaling if requested:
+if [ "$CPUFREQ" = "on" ]; then
+  ### CPU frequency scaling modules for the Linux kernel CPUfreq subsystem.
+  #
+  # Clock scaling allows you to change the clock speed of the CPUs on the fly.
+  # This is a nice method to save battery power, because the lower the clock
+  # speed is, the less power the CPU consumes.
+  # 
+  # It should not hurt anything to try to load these modules.
+  #
+  # generic ACPI P-States based driver:
+  /sbin/modprobe acpi-cpufreq 2>/dev/null
+  # AMD mobile K6-2/3+ PowerNow!:
+  /sbin/modprobe powernow-k6 2>/dev/null
+  # AMD mobile Athlon PowerNow!:
+  /sbin/modprobe powernow-k7 2>/dev/null
+  # AMD Cool&Quiet PowerNow!:
+  /sbin/modprobe powernow-k8 2>/dev/null
+  # Intel SpeedStep using the SMI BIOS interface:
+  /sbin/modprobe speedstep-smi 2>/dev/null
+  # Intel SpeedStep on ICH-based chipsets:
+  /sbin/modprobe speedstep-ich 2>/dev/null
+  # Intel Enhanced SpeedStep :
+  /sbin/modprobe speedstep-centrino 2>/dev/null
+  # Intel Pentium4/Xeon clock modulation is not enabled by default.
+  # The kernel documentation says "This adds the CPUFreq driver for Intel
+  # Pentium 4 / XEON processors.  When enabled it will lower CPU temperature
+  # by skipping clocks.  This driver should be only used in exceptional
+  # circumstances when very low power is needed because it causes severe
+  # slowdowns and noticeable latencies.  Normally Speedstep should be used
+  # instead."
+  # If you still want to try the Pentium4/Xeon module, uncomment the next line:
+  #/sbin/modprobe p4-clockmod 2>/dev/null
+  # NatSemi Geode GX / Cyrix MediaGXm:
+  /sbin/modprobe gx-suspmod  2>/dev/null
+  # Transmeta Crusoe / Efficeon LongRun:
+  /sbin/modprobe longrun  2>/dev/null
+  # VIA Cyrix Longhaul:
+  /sbin/modprobe longhaul  2>/dev/null
+  # nForce2 FSB changing cpufreq driver:
+  /sbin/modprobe cpufreq-nforce2 2>/dev/null
+  # Enhanced PowerSaver driver for VIA C7 CPUs:
+  /sbin/modprobe e_powersaver 2>/dev/null
+
+  ### CPU frequency scaling policies:
+  #
+  # Use the CPUFreq governor 'powersave' as default.  This sets the
+  # frequency statically to the lowest frequency supported by the CPU.
+  #/sbin/modprobe cpufreq_powersave
+  #
+  # Use the CPUFreq governor 'performance' as default. This sets the
+  # frequency statically to the highest frequency supported by the CPU.
+  #/sbin/modprobe cpufreq_performance
+  #
+  # Use the CPUFreq governor 'conservative' as default.  This allows you
+  # to get a full dynamic frequency capable system by simply loading your
+  # cpufreq low-level hardware driver.  Be aware that not all cpufreq
+  # drivers support the 'conservative' governor -- the fallback governor
+  # will be the 'performance' governor.
+  #/sbin/modprobe cpufreq_conservative
+  #
+  # Use the CPUFreq governor 'ondemand' as default.  This allows you to
+  # get a full dynamic frequency capable system by simply loading your
+  # cpufreq low-level hardware driver.  Be aware that not all cpufreq
+  # drivers support the 'ondemand' governor -- the fallback governor will
+  # be the performance governor.  This seems to be the most-recommended
+  # scaling policy, so rc.modules will try to load this by default.
+  /sbin/modprobe cpufreq_ondemand 2>/dev/null
+
+  ### CPU scaling governor:
+  #
+  # Set the default scaling_governor to be used (such as userspace or ondemand)
+  # if there is a CPUFreq scaling policy module loaded that supports it:
+  SCALING_GOVERNOR=ondemand
+  #
+  # Try to enable the scaling_governor selected above:
+  if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ]; then
+    if grep -wq "$SCALING_GOVERNOR" /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ; then
+      if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
+        for SYSCPUFILE in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do
+          echo "$SCALING_GOVERNOR" > $SYSCPUFILE
+        done
+      fi
+    fi
+  fi
+
+fi # End enabling CPU scaling support
+
+# We are done with these variables now:
+unset NEWMODS RELEASE CPUFREQ SCALING_GOVERNOR SYSCPUFILE
+
diff --git a/source/k/kernel-modules/slack-desc b/source/k/packaging-x86_64/kernel-modules/slack-desc
index 5aa3dd40..5aa3dd40 100644
--- a/source/k/kernel-modules/slack-desc
+++ b/source/k/packaging-x86_64/kernel-modules/slack-desc
diff --git a/source/kde/KDE.SlackBuild b/source/kde/KDE.SlackBuild
index 048c09e9..7d40f165 100755
--- a/source/kde/KDE.SlackBuild
+++ b/source/kde/KDE.SlackBuild
@@ -1,40 +1,435 @@
 #!/bin/sh
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-# Build (and install) all KDE core packages.
-# Written for Slackware by volkerdi@slackware.com.
-# Modified for KDE4 by Robby Workman <rworkman@slackware.com>
-# Modified for KDE4 by Eric Hameleers <alien@slackware.com>
+# Adapted by Eric Hameleers <alien@slackware.com> from the modular x.org build.
 
-# kdeaccessibility builds plugins for epos, festival, flite, freetts, and
-# hadifix, so they should work with kde if any of those are installed later
+# To build only a single package group, specify it as $1, like:
+#   ./KDE.SlackBuild kdeedu
+# To build only a single package, specify both the group name
+# and the name of the package, like:
+#   ./KDE.SlackBuild kdeedu:marble
+#   ./KDE.SlackBuild kdebindings:perlqt,perlkde
 
-# Set the config option variables if they are not already set:
+
+CLEANUP=${CLEANUP:-"yes"} # clean up build directory after successful build.
+PRECHECK=${PRECHECK:-"no"} # don't let the script check the available sources.
+CHECKOUT=${CHECKOUT:-"no"} # don't let the script checkout missing sources.
+
+KDEGITURI="git://anongit.kde.org"
+
+pkgbase() {
+  PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev)
+  case $PKGEXT in
+  'gz' )
+    PKGRETURN=$(basename $1 .tar.gz)
+    ;;
+  'bz2' )
+    PKGRETURN=$(basename $1 .tar.bz2)
+    ;;
+  'lzma' )
+    PKGRETURN=$(basename $1 .tar.lzma)
+    ;;
+  'xz' )
+    PKGRETURN=$(basename $1 .tar.xz)
+    ;;
+  *)
+    PKGRETURN=$(basename $1)
+    ;;
+  esac
+  echo $PKGRETURN
+}
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+# Set up a few useful functions:
+
+fix_perms() {
+  target_dir=$1
+  [ -z "$target_dir" ] && target_dir='.'
+
+  chown -R root:root $target_dir
+  find $target_dir \
+   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+   -exec chmod 755 {} \; -o \
+   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+   -exec chmod 644 {} \;
+}
+
+strip_binaries() {
+  target_dir=$1
+  [ -z "$target_dir" ] && target_dir='.'
+
+  find $target_dir | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find $target_dir | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find $target_dir | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
+}
+
+process_man_pages() {
+  # Compress and if needed symlink the man pages:
+  if [ -d usr/man ]; then
+    ( cd usr/man
+      for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+      done
+    )
+  fi
+}
+
+process_info_pages() {
+  # Compress info pages and purge "dir" file from the package:
+  if [ -d usr/info ]; then
+    ( cd usr/info
+      rm -f dir
+      gzip -9 *
+    )
+  fi
+}
+
+no_usr_share_doc() {
+  # If there are docs, move them:
+  if [ -d usr/share/doc ]; then
+    mkdir -p usr/doc
+    mv usr/share/doc/* usr/doc
+    rmdir usr/share/doc
+  fi
+}
+
+precheck() {
+  # See if the sources we have match the module components we want to build:
+  RETVAL=0
+
+  for SRCFILE in $(find $CWD/src -name "*.tar.?z*") ; do
+    if cat modules/* |grep "^ *#" |grep -wq $(echo $(basename $SRCFILE) | rev | cut -f2- -d- | rev)$ ; then
+      echo "Source file '$(basename $SRCFILE)' is commented out in 'modules' !"
+    elif ! cat modules/* |grep -v "^ *#" |grep -wq $(echo $(basename $SRCFILE) | rev | cut -f2- -d- | rev) ; then
+      echo "Source file '$(basename $SRCFILE)' is not mentioned in 'modules' !"
+      RETVAL=1
+    fi
+  done
+
+  for MODULE in $(cat $CWD/modules/* | grep -v "^#") ; do
+    #if [ -z "$(find $CWD/src -name ${MODULE}-*)" ] ; then
+    if [ -z "$(find $CWD/src -name $MODULE-*.tar.* |grep -E "$MODULE-[^-]+.tar.*$|$MODULE-[0-9].+.tar.*$")" ] ; then
+      echo "Module '$MODULE' does not have a matching source tarball !"
+      if [ "$CHECKOUT" = "yes" -o "$CHECKOUT" = "YES" ]; then
+        echo "Checking out KDE component at branch '$VERSION'."
+        git archive --format=tar --prefix {$MODULE}-${VERSION}/ --remote ${KDEGITURI}/${MODULE}.git v${VERSION} | xz -c > $CWD/src/${MODULE}-${VERSION}.tar.xz
+        RETVAL=$?
+        if [ $RETVAL -ne 0 ]; then
+          echo "Error while checking out '$MODULE' !"
+          mv $CWD/src/${MODULE}-${VERSION}.tar.xz $CWD/src/${MODULE}-${VERSION}.tar.xz.failed
+        fi
+      else
+        RETVAL=1
+      fi
+    fi
+    # A missing slack-desc counts as fatal even if the program may end up
+    # inside the big meta-package.
+    if [ -z "$(find $CWD/slack-desc -name ${MODULE})" ] ; then
+      echo "Module '$MODULE' does not have a slack-desc file !"
+      RETVAL=1
+    fi
+  done
+
+  if [ $RETVAL -eq 0 ]; then
+    echo "Check complete, build starts in 5 seconds"
+    sleep 5
+  else
+    exit 1
+  fi
+}
+
+# Support function builds one complete module (like 'kdelibs'), or
+# exactly one package which is part of a module (like 'okular'):
+build_mod_pkg () {
+  kde_module=$1
+  kde_pkg=$2
+
+  cd $CWD/modules
+
+  # See if $kde_module is a module name like "kdeadmin":
+  if [ ! -z "$kde_module" ]; then
+    if [ ! -f "$kde_module" ]; then
+      return
+    fi
+  fi
+  PKG=${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module}
+  rm -rf $PKG
+  mkdir -p $PKG
+  ( for PKGNAME in $(cat $kde_module |grep -v "^$" |grep -v "^#") ; do
+      # Find the full source filename - yeah ugly, but I had two goals:
+      # 1- source tarball can be in a random subdirectory of src/
+      # 2- differentiate between e.g. 'kdepim' and 'kdepim-runtime'
+      kde_src=$(basename $(find $CWD/src -name "$PKGNAME-*.tar.?z*" |grep -E "$PKGNAME-[^-]+.tar.*$|$PKGNAME-[0-9].+.tar.*$") 2>/dev/null)
+      if [ "x$kde_src" = "x" ]; then
+        echo "** Did not find '$PKGNAME' in src"
+        continue
+      fi
+      # Reset $PKGARCH to its initial value:
+      PKGARCH=$ARCH
+      # Perhaps $PKGARCH should be something different:
+      if grep -wq "^$PKGNAME" ${CWD}/noarch ; then
+        PKGARCH=noarch
+      fi 
+      if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then
+        continue
+      fi
+      cd $SLACK_KDE_BUILD_DIR/${kde_module}
+      # If $kde_pkg is set, we only want to build one package:
+      if [ ! -z "$kde_pkg" ]; then
+        if [ "$kde_pkg" = "$PKGNAME" ]; then
+          # Set $PKG to a private dir for the modular package build:
+          PKG=$SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME
+          rm -rf $PKG
+          mkdir -p $PKG
+        else
+          continue
+        fi
+      else
+        echo
+        echo "Building from source ${kde_src}"
+        echo
+      fi
+      if grep -wq "^$PKGNAME" ${CWD}/modularize ; then
+        # Set $PKG to a private dir for the modular package build:
+        PKG=$SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME
+        rm -rf $PKG
+        mkdir -p $PKG
+      fi
+
+      # Let's figure out the version number on the modular package:
+      MODULAR_PACKAGE_VERSION=$(echo $kde_src | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+
+      rm -rf $(pkgbase $kde_src)
+      tar xf $(find $CWD/src -name ${kde_src}) || exit 1
+      cd $(pkgbase $kde_src) || exit 1
+
+      fix_perms
+
+      # If any patches are needed, call this script to apply them:
+      if [ -r $CWD/patch/${PKGNAME}.patch ]; then
+        . $CWD/patch/${PKGNAME}.patch || exit 1
+      fi
+
+      # If there's any pre-install things to do, do them:
+      if [ -r $CWD/pre-install/${PKGNAME}.pre-install ]; then
+        . $CWD/pre-install/${PKGNAME}.pre-install
+      fi
+
+      # Run cmake, using custom cmake script if needed:
+      if [ -r $CWD/cmake/${PKGNAME} ]; then
+        . $CWD/cmake/${PKGNAME}
+      else
+        # This is the default configure script:
+        . $CWD/cmake/cmake
+      fi
+
+      make $NUMJOBS || make || exit 1
+      make install DESTDIR=$PKG || exit 1
+
+      # Back to source toplevel builddir, since cmake may have run in a subdir:
+      cd $SLACK_KDE_BUILD_DIR/${kde_module}/$(pkgbase $kde_src)
+
+      mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
+      # Use specific documentation files if available, else use a default set:
+      if [ -r $CWD/docs/${PKGNAME} ]; then
+        cp -a $(cat $CWD/docs/${PKGNAME}) \
+          $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
+      else
+        cp -a \
+          AUTHORS* CONTRIBUTING* COPYING* HACKING* \
+          INSTALL* MAINTAINERS README* NEWS* TODO* \
+          $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
+          # If there's a ChangeLog, installing at least part of the recent
+          # history is useful, but don't let it get totally out of control:
+          if [ -r ChangeLog ]; then
+            DOCSDIR=$(echo $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION)
+            cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+            touch -r ChangeLog $DOCSDIR/ChangeLog
+          fi
+      fi
+
+      # Get rid of zero-length junk files:
+      find $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION -type f -size 0 -exec rm --verbose "{}" \;
+      rmdir --verbose $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION 2> /dev/null
+
+      # Strip binaries:
+      strip_binaries $PKG
+
+      # If there's any special post-install things to do, do them:
+      if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then
+        . $CWD/post-install/${PKGNAME}.post-install
+      fi
+
+      # If this package requires some doinst.sh material, add it here:
+      if [ -r $CWD/doinst.sh/${PKGNAME} ]; then
+        mkdir -p $PKG/install
+        cat $CWD/doinst.sh/${PKGNAME} \
+          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+          >> $PKG/install/doinst.sh
+      fi
+
+      # If this is a modular package, build it here:
+      if [ -d $SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME ]; then
+        cd $PKG
+        process_man_pages
+        process_info_pages
+        no_usr_share_doc          
+        mkdir -p $PKG/install
+        if [ -r $CWD/slack-desc/${PKGNAME} ]; then
+          cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc
+        else
+          touch $PKG/install/slack-desc-missing
+        fi
+        if [ -r $CWD/build/${PKGNAME} ]; then
+          MODBUILD=$(cat $CWD/build/${PKGNAME})
+        else
+          MODBUILD=$BUILD
+        fi
+        if [ -r $CWD/makepkg/${PKGNAME} ]; then
+          BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
+        else
+          /sbin/makepkg -l y -c n ${SLACK_KDE_BUILD_DIR}/${kde_module}/${PKGNAME}-$(echo $MODULAR_PACKAGE_VERSION |tr - _)-${PKGARCH}-${MODBUILD}.txz
+        fi
+        # We will continue with the fresh packages installed:
+        upgradepkg --install-new --reinstall ${SLACK_KDE_BUILD_DIR}/${kde_module}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
+        # Keep MIME database current:
+        /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null &
+      fi
+
+      # Reset $PKG to assume we're building the whole source dir:
+      PKG=${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module}
+
+    done
+
+    # Nothing here?  Must have been fully modular. :-)
+    if [ ! -d ${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module}/usr ]; then
+      return
+    fi
+
+    # Build a "<kde_module>" package for anything that wasn't built modular:
+    # It's safer to consider these to have binaries in them. ;-)
+    PKGARCH=$ARCH
+    cd $PKG
+
+    process_man_pages
+    process_info_pages
+    no_usr_share_doc
+
+    # If there are post-install things to do for the combined package,
+    # we do them here.  This could be used for things like making a
+    # VERSION number for a combined package.  :-)
+    if [ -r $CWD/post-install/${kde_module}.post-install ]; then
+      . $CWD/post-install/${kde_module}.post-install
+    fi
+    mkdir -p $PKG/install
+    if [ -r $CWD/slack-desc/${kde_module} ]; then
+      cat $CWD/slack-desc/${kde_module} > $PKG/install/slack-desc
+    else
+      touch $PKG/install/slack-desc-missing
+    fi
+    if [ -r $CWD/doinst.sh/${kde_module} ]; then
+      cat $CWD/doinst.sh/${kde_module} \
+        | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+        >> $PKG/install/doinst.sh
+    fi
+    if [ -r $CWD/build/${kde_module} ]; then
+      SRCDIRBUILD=$(cat $CWD/build/${kde_module})
+    else
+      SRCDIRBUILD=$BUILD
+    fi
+    if [ -r $CWD/makepkg/${kde_module} ]; then
+      BUILD=$SRCDIRBUILD . $CWD/makepkg/${kde_module}
+    else
+      /sbin/makepkg -l y -c n ${SLACK_KDE_BUILD_DIR}/${kde_module}/${kde_module}-$(echo $VERSION |tr - _)-${PKGARCH}-${SRCDIRBUILD}.txz
+    fi
+    # We will continue with the fresh packages installed:
+    upgradepkg --install-new --reinstall ${SLACK_KDE_BUILD_DIR}/${kde_module}/${kde_module}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
+    # Keep MIME database current:
+    /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null &
+  )
+}
+
+# Process the module queue. Format is:
+# module[:subpackage[,subpackage]] [module...]
+deterministic_build() {
+  RET=0
+  for ENTRY in $1 ; do
+    KDE_MOD=$(echo "$ENTRY": | cut -f1 -d:)
+    KDE_PKGS=$(echo "$ENTRY": | cut -f2 -d:)
+    if [ -z "$KDE_PKGS" ]; then
+      build_mod_pkg $KDE_MOD
+      let RET=$RET+$?
+    else
+      for KDE_PKG in $(echo $KDE_PKGS |tr ',' ' ') ; do
+        build_mod_pkg $KDE_MOD $KDE_PKG
+        let RET=$RET+$?
+      done
+    fi
+  done
+
+  return $RET
+}
+
+# MAIN PART #
+
+# Import the build configuration options for as far as they are not already set:
 [ -r ./KDE.options ] && . ./KDE.options
 
 # This avoids compiling a version number into KDE's .la files:
 QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR
 
 # Get the kde environment variables
-[ -d kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./kdebase/profile.d/kde.sh)
+[ -d post-install/kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./post-install/kdebase/profile.d/kde.sh)
 
-#  These, and polkit-qt-1 from git, will be needed soon, but are too new to use here.
-#  polkit-kde-agent-1 \
-#  polkit-kde-kcmodules-1 "
+# Where we are going to do all the hard labour:
+SLACK_KDE_BUILD_DIR=$TMP/kde-build
+mkdir -p $SLACK_KDE_BUILD_DIR
 
+# Yes, we know kde-workspace is built twice.  kdebase needs the
+#   plasma bits from it, and then we build it again for good measure...
+# Same goes for kdelibs (at least during KDE 4.8.x) kdeutils:ksecrets needs
+#   kdelibs and then kdelibs needs a rebuild to pick up ksecretservice
+#   (this will no longer be required in KDE 4.9).
 KDEMODS=" \
-  polkit-qt-1 \
   kdelibs \
   kdepimlibs \
   kdebase \
-  kdebase-workspace \
-  kdebase-runtime \
   kdesdk \
   kdegraphics \
   kdebindings \
-  kdebase-workspace \
+  kdebase:kde-workspace \
   kdeaccessibility \
   kdeutils \
+  kdelibs \
   kdemultimedia \
+  extragear:libktorrent \
   kdenetwork \
   oxygen-icons \
   kdeadmin \
@@ -46,28 +441,36 @@ KDEMODS=" \
   kdeedu \
   kdewebdev \
   kdeplasma-addons \
-  polkit-kde-1 "
+  polkit-kde \
+  extragear \
+  "
 
 # Allow for specification of individual packages to be built:
 if [ -z "$1" ]; then
   MODQUEUE=$KDEMODS
 else
-  MODQUEUE=$*
+  MODQUEUE="$*"
 fi
 
-# Yes, we know kdebase-workspace is built twice.  kdebase needs the
-#   plasma bits from it, and then we build it again for good measure...
+# If requested, check if
+# sources, module definitions and slack-desc are complete and matching:
+if [ "$PRECHECK" = "yes" -o "$PRECHECK" = "YES" ]; then
+  precheck
+fi
+
+# And finally, start working!
 for module in \
   $MODQUEUE ;
 do
-  cd $module
-  ./$module.SlackBuild
+  echo "SlackBuild processing module '$module'"
+  deterministic_build $module
   if [ $? = 0 ]; then
-    # Yes, I will build with the fresh packages installed:
-    upgradepkg --install-new --reinstall /tmp/${module}-*.txz
-    # Keep MIME database current:
-    /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
-    rm -rf /tmp/package-${module} /tmp/${module}-$VERSION
+    # Move the created packages up into the KDE build directory:
+    mv ${SLACK_KDE_BUILD_DIR}/$(echo $module |cut -f1 -d:)/*.t?z ${SLACK_KDE_BUILD_DIR}/
+    if [ "$CLEANUP" = "yes" -o "$CLEANUP" = "YES" ]; then
+      # Clean out package and build directories:
+      rm -rf ${SLACK_KDE_BUILD_DIR}/$(echo $module |cut -f1 -d:)
+    fi
   else
     echo "${module} failed to build."
     exit 1
@@ -75,3 +478,6 @@ do
   cd - ;
 done
 
+exit 0
+
+
diff --git a/source/kde/KDE.options b/source/kde/KDE.options
index 16ae672c..debc6ea1 100644
--- a/source/kde/KDE.options
+++ b/source/kde/KDE.options
@@ -3,19 +3,23 @@
 # usually has a different version number), or by setting your own
 # environment variables.
 
-[ -z $VERSION ] && export VERSION=4.5.5
+[ -z $VERSION ] && export VERSION=4.8.5
 [ -z $BUILD ] && export BUILD=1
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
+[ -z $PKGARCH ] && export PKGARCH=$ARCH
+
 # Use this as CFLAGS and CXXFLAGS:
 if [ -z "$SLKCFLAGS" ]; then
   if [ "$ARCH" = "i486" ]; then
@@ -33,6 +37,9 @@ if [ -z "$SLKCFLAGS" ]; then
   elif [ "$ARCH" = "armel" ]; then
     export SLKCFLAGS="-O2 -march=armv4t"
     export LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "armv7hl" ]; then
+    export SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+    export LIBDIRSUFFIX=""
   else
     export SLKCFLAGS="-O2"
     export LIBDIRSUFFIX=""
@@ -47,5 +54,5 @@ fi
 # Additional cmake flags that are spanned across the KDE modules
 # Do not use "final build" unless we build an actual release.
 #export KDE_OPT_ARGS=" -DKDE4_ENABLE_FINAL=\"ON\"  -DSITE=\"slackware.com\" "
-export KDE_OPT_ARGS=" -DSITE=\"slackware.com\" "
+export KDE_OPT_ARGS=" -DSITE=\"slackware.com\" -DKDE_DISTRIBUTION_TEXT=\"volkerdi@slackware.com\" "
 
diff --git a/source/kde/KDE_extra.SlackBuild b/source/kde/KDE_extra.SlackBuild
deleted file mode 100755
index d76c18e6..00000000
--- a/source/kde/KDE_extra.SlackBuild
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/sh
-
-# Build (and install) all KDE "extra" packages.
-# Written for Slackware by volkerdi@slackware.com.
-# Modified for KDE4 by Robby Workman <rworkman@slackware.com>
-# Modified for KDE4 by Eric Hameleers <alien@slackware.com>
-
-# Set the config option variables if they are not already set:
-[ -r ./KDE.options ] && . ./KDE.options
-
-# This avoids compiling a version number into KDE's .la files:
-QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR
-
-# Get the kde environment variables
-[ -d kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./kdebase/profile.d/kde.sh)
-
-KDEMODS=" \
-  kdevplatform \
-  kdevelop \
-  konq-plugins \
-  kopete-cryptography \
-  libktorrent \
-  ktorrent \
-  skanlite \
-  koffice \
-  kaudiocreator \
-  amarok \
-  k3b"
-
-# Allow for specification of individual packages to be built:
-if [ -z "$1" ]; then
-  MODQUEUE=$KDEMODS
-else
-  MODQUEUE=$*
-fi
-
-for module in \
-  $MODQUEUE ;
-do
-  cd $module
-  ./$module.SlackBuild
-  if [ $? = 0 ]; then
-    # Yes, I will build with the fresh packages installed:
-    upgradepkg --install-new --reinstall /tmp/${module}-*.txz
-    # Keep MIME database current:
-    /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
-    rm -rf /tmp/package-${module} /tmp/${module}-$VERSION
-  else
-    echo "${module} failed to build."
-    exit 1
-  fi
-  cd - ;
-done
-
diff --git a/source/kde/amarok/amarok.SlackBuild b/source/kde/amarok/amarok.SlackBuild
deleted file mode 100755
index 2a6fc082..00000000
--- a/source/kde/amarok/amarok.SlackBuild
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-amarok
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-# Notify the user if libmysqld.a (embedded mysql) is missing:
-if [ ! -r /usr/lib${LIBDIRSUFFIX}/mysql/libmysqld.a ]; then
-  cat << EOF
-ERROR:  missing /usr/lib${LIBDIRSUFFIX}/mysql/libmysqld.a
-        please use mysql-embedded.build in source/ap/mysql/
-        to build and install this, and then try again.
-EOF
-  exit 1
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building amarok-$VERSION..."
-tar xvf $CWD/../src/extragear/amarok-$VERSION.tar.?z* || exit 1
-cd amarok-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# NOTE: if cmake complains that it can not find qscript-qt when in fact you
-# have it installed, this is likely because you are building inside a chroot.
-# To remedy the error, run the command "dbus-uuidgen --ensure"
-# and then re-start this SlackBuild :
-
-export QTSCRIPTS=/usr/lib${LIBDIRSUFFIX}/qt4/plugins/script
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/amarok-$VERSION
-cp -a \
-  AUTHORS COPYING* INSTALL OXYGEN README TODO \
-  $PKG/usr/doc/amarok-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/amarok-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/amarok/local.options b/source/kde/amarok/local.options
deleted file mode 100644
index c9623084..00000000
--- a/source/kde/amarok/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=2.4.0
diff --git a/source/kde/build/calligra b/source/kde/build/calligra
new file mode 100644
index 00000000..b8626c4c
--- /dev/null
+++ b/source/kde/build/calligra
@@ -0,0 +1 @@
+4
diff --git a/source/kde/cmake/amarok b/source/kde/cmake/amarok
new file mode 100644
index 00000000..9cf5a28b
--- /dev/null
+++ b/source/kde/cmake/amarok
@@ -0,0 +1,22 @@
+# NOTE: if cmake complains that it can not find qscript-qt when in fact you
+# have it installed, this is likely because you are building inside a chroot.
+# To remedy the error, run the command "dbus-uuidgen --ensure"
+# and then re-start this SlackBuild :
+
+export QTSCRIPTS=/usr/lib${LIBDIRSUFFIX}/qt4/plugins/script
+
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/analitza b/source/kde/cmake/analitza
new file mode 100644
index 00000000..cf539f40
--- /dev/null
+++ b/source/kde/cmake/analitza
@@ -0,0 +1,18 @@
+mkdir build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DKDE_PLATFORM_FEATURE_DISABLE_DEPRECATED=TRUE \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_EXE_LINKER_FLAGS:STRING="-ltermcap" \
+    -DCMAKE_EXE_LINKER_FLAGS_RELEASE:STRING="-ltermcap" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/bluedevil b/source/kde/cmake/bluedevil
new file mode 100644
index 00000000..d855f531
--- /dev/null
+++ b/source/kde/cmake/bluedevil
@@ -0,0 +1,13 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DBUILD_tests:BOOL=OFF \
+    ..
+
diff --git a/source/kde/cmake/calligra b/source/kde/cmake/calligra
new file mode 100644
index 00000000..adb281fd
--- /dev/null
+++ b/source/kde/cmake/calligra
@@ -0,0 +1,17 @@
+mkdir build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DKDE_PLATFORM_FEATURE_DISABLE_DEPRECATED=TRUE \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DIHAVEPATCHEDQT:BOOL=ON \
+    ..
+
diff --git a/source/kde/cmake/cmake b/source/kde/cmake/cmake
new file mode 100644
index 00000000..263c12ca
--- /dev/null
+++ b/source/kde/cmake/cmake
@@ -0,0 +1,16 @@
+mkdir build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DKDE_PLATFORM_FEATURE_DISABLE_DEPRECATED=TRUE \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/k3b b/source/kde/cmake/k3b
new file mode 100644
index 00000000..75a29ecb
--- /dev/null
+++ b/source/kde/cmake/k3b
@@ -0,0 +1,17 @@
+mkdir build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DK3B_ENABLE_HAL_SUPPORT:BOOL=OFF \
+    -DKDE4_ENABLE_HTMLHANDBOOK:BOOL=ON \
+    ..
+
diff --git a/source/kde/cmake/kdeaccessibility b/source/kde/cmake/kdeaccessibility
new file mode 100644
index 00000000..3fc784c8
--- /dev/null
+++ b/source/kde/cmake/kdeaccessibility
@@ -0,0 +1,17 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DBUILD_jovie:BOOL=OFF \
+    -DWITH_Speechd:BOOL=OFF \
+    ..
+
diff --git a/source/kde/cmake/kdeadmin b/source/kde/cmake/kdeadmin
new file mode 100644
index 00000000..863974d6
--- /dev/null
+++ b/source/kde/cmake/kdeadmin
@@ -0,0 +1,18 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DKU_FIRSTGID=1000 \
+    -DKU_FIRSTUID=1000 \
+    --with-shadow \
+    ..
+
diff --git a/source/kde/cmake/kdeartwork b/source/kde/cmake/kdeartwork
new file mode 100644
index 00000000..4f394d41
--- /dev/null
+++ b/source/kde/cmake/kdeartwork
@@ -0,0 +1,16 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DKSCREENSAVER_SOUND_SUPPORT=ON \
+    ..
+
diff --git a/source/kde/cmake/kdebase b/source/kde/cmake/kdebase
new file mode 100644
index 00000000..c1835c39
--- /dev/null
+++ b/source/kde/cmake/kdebase
@@ -0,0 +1,16 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DRUN_KAPPFINDER=ON \
+    ..
+
diff --git a/source/kde/cmake/kdebindings b/source/kde/cmake/kdebindings
new file mode 100644
index 00000000..c4228309
--- /dev/null
+++ b/source/kde/cmake/kdebindings
@@ -0,0 +1,25 @@
+# Set 'vendorarch' (install location for vendor shipped
+# architecture dependent perl modules):
+eval $(perl '-V:vendorarch')
+
+mkdir -p build
+cd build
+    #-DCMAKE_BACKWARDS_COMPATIBILITY:STRING="2.2" \
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DCUSTOM_PERL_SITE_ARCH_DIR=$vendorarch \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DENABLE_QYOTO:BOOL=OFF \
+    -DENABLE_QSCINTILLA_SHARP:BOOL=OFF \
+    -DENABLE_KIMONO:BOOL=OFF \
+    -DBUILD_csharp:BOOL=OFF \
+    ..
+
diff --git a/source/kde/cmake/kdelibs b/source/kde/cmake/kdelibs
new file mode 100644
index 00000000..92015a91
--- /dev/null
+++ b/source/kde/cmake/kdelibs
@@ -0,0 +1,17 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DWITH_HAL=OFF \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DKDE_DISTRIBUTION_TEXT="volkerdi@slackware.com" \
+    ..
+
diff --git a/source/kde/cmake/kdenetwork b/source/kde/cmake/kdenetwork
new file mode 100644
index 00000000..eeb62061
--- /dev/null
+++ b/source/kde/cmake/kdenetwork
@@ -0,0 +1,16 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DWITH_irc=ON \
+    ..
+
diff --git a/source/kde/cmake/kdewebdev b/source/kde/cmake/kdewebdev
new file mode 100644
index 00000000..1e309b86
--- /dev/null
+++ b/source/kde/cmake/kdewebdev
@@ -0,0 +1,17 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DLIBTIDY_INCLUDE_DIR=$PKG/usr/include \
+    -DLIBTIDY_LIBRARIES=$PKG/usr/lib${LIBDIRSUFFIX}/libtidy.so \
+    ..
+
diff --git a/source/kde/cmake/kwebkitpart b/source/kde/cmake/kwebkitpart
new file mode 100644
index 00000000..ca8ac5d2
--- /dev/null
+++ b/source/kde/cmake/kwebkitpart
@@ -0,0 +1,11 @@
+mkdir -p build
+cd build
+  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \
+  PATH=$QTDIR/bin:$PATH \
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/networkmanagement b/source/kde/cmake/networkmanagement
new file mode 100644
index 00000000..81964f4f
--- /dev/null
+++ b/source/kde/cmake/networkmanagement
@@ -0,0 +1,17 @@
+mkdir build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DKDE_PLATFORM_FEATURE_DISABLE_DEPRECATED=TRUE \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DDBUS_SYSTEM_POLICY_DIR=/etc/dbus-1/system.d \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/perlkde b/source/kde/cmake/perlkde
new file mode 100644
index 00000000..670c028a
--- /dev/null
+++ b/source/kde/cmake/perlkde
@@ -0,0 +1,20 @@
+# Set 'vendorarch' (install location for vendor shipped
+# architecture dependent perl modules):
+eval $(perl '-V:vendorarch')
+
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DCUSTOM_PERL_SITE_ARCH_DIR=$vendorarch \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/perlqt b/source/kde/cmake/perlqt
new file mode 100644
index 00000000..670c028a
--- /dev/null
+++ b/source/kde/cmake/perlqt
@@ -0,0 +1,20 @@
+# Set 'vendorarch' (install location for vendor shipped
+# architecture dependent perl modules):
+eval $(perl '-V:vendorarch')
+
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DCUSTOM_PERL_SITE_ARCH_DIR=$vendorarch \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/polkit-kde-agent-1 b/source/kde/cmake/polkit-kde-agent-1
new file mode 100644
index 00000000..7c98736f
--- /dev/null
+++ b/source/kde/cmake/polkit-kde-agent-1
@@ -0,0 +1,15 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/cmake/polkit-kde-kcmodules-1 b/source/kde/cmake/polkit-kde-kcmodules-1
new file mode 100644
index 00000000..7c98736f
--- /dev/null
+++ b/source/kde/cmake/polkit-kde-kcmodules-1
@@ -0,0 +1,15 @@
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+
diff --git a/source/kde/docs/k3b b/source/kde/docs/k3b
new file mode 100644
index 00000000..b12b9431
--- /dev/null
+++ b/source/kde/docs/k3b
@@ -0,0 +1 @@
+COPYING* ChangeLog FAQ.txt INSTALL.txt PERMISSIONS.txt README.txt Release\ How\ To.txt
diff --git a/source/kde/docs/kdepimlibs b/source/kde/docs/kdepimlibs
new file mode 100644
index 00000000..88e3194a
--- /dev/null
+++ b/source/kde/docs/kdepimlibs
@@ -0,0 +1,2 @@
+COPYING* DEBUG HACKING MAINTAINERS PLAN POLICIES README*
+
diff --git a/source/kde/amarok/doinst.sh b/source/kde/doinst.sh/amarok
index e376b59a..e376b59a 100644
--- a/source/kde/amarok/doinst.sh
+++ b/source/kde/doinst.sh/amarok
diff --git a/source/kde/k3b/doinst.sh b/source/kde/doinst.sh/blinken
index e376b59a..e376b59a 100644
--- a/source/kde/k3b/doinst.sh
+++ b/source/kde/doinst.sh/blinken
diff --git a/source/kde/kdebase/doinst.sh b/source/kde/doinst.sh/bluedevil
index 85ff4d86..85ff4d86 100644
--- a/source/kde/kdebase/doinst.sh
+++ b/source/kde/doinst.sh/bluedevil
diff --git a/source/kde/kaudiocreator/doinst.sh b/source/kde/doinst.sh/cantor
index e376b59a..e376b59a 100644
--- a/source/kde/kaudiocreator/doinst.sh
+++ b/source/kde/doinst.sh/cantor
diff --git a/source/kde/kdeadmin/doinst.sh b/source/kde/doinst.sh/gwenview
index e376b59a..e376b59a 100644
--- a/source/kde/kdeadmin/doinst.sh
+++ b/source/kde/doinst.sh/gwenview
diff --git a/source/kde/kdeartwork/doinst.sh b/source/kde/doinst.sh/jovie
index e376b59a..e376b59a 100644
--- a/source/kde/kdeartwork/doinst.sh
+++ b/source/kde/doinst.sh/jovie
diff --git a/source/kde/kdeedu/doinst.sh b/source/kde/doinst.sh/k3b
index e376b59a..e376b59a 100644
--- a/source/kde/kdeedu/doinst.sh
+++ b/source/kde/doinst.sh/k3b
diff --git a/source/kde/kdegames/doinst.sh b/source/kde/doinst.sh/kalgebra
index e376b59a..e376b59a 100644
--- a/source/kde/kdegames/doinst.sh
+++ b/source/kde/doinst.sh/kalgebra
diff --git a/source/kde/kdegraphics/doinst.sh b/source/kde/doinst.sh/kalzium
index e376b59a..e376b59a 100644
--- a/source/kde/kdegraphics/doinst.sh
+++ b/source/kde/doinst.sh/kalzium
diff --git a/source/kde/kdepim-runtime/doinst.sh b/source/kde/doinst.sh/kamera
index e376b59a..e376b59a 100644
--- a/source/kde/kdepim-runtime/doinst.sh
+++ b/source/kde/doinst.sh/kamera
diff --git a/source/kde/kdepim/doinst.sh b/source/kde/doinst.sh/kanagram
index e376b59a..e376b59a 100644
--- a/source/kde/kdepim/doinst.sh
+++ b/source/kde/doinst.sh/kanagram
diff --git a/source/kde/kdeplasma-addons/doinst.sh b/source/kde/doinst.sh/kate
index e376b59a..e376b59a 100644
--- a/source/kde/kdeplasma-addons/doinst.sh
+++ b/source/kde/doinst.sh/kate
diff --git a/source/kde/kdesdk/doinst.sh b/source/kde/doinst.sh/kaudiocreator
index e376b59a..e376b59a 100644
--- a/source/kde/kdesdk/doinst.sh
+++ b/source/kde/doinst.sh/kaudiocreator
diff --git a/source/kde/kdetoys/doinst.sh b/source/kde/doinst.sh/kbruch
index e376b59a..e376b59a 100644
--- a/source/kde/kdetoys/doinst.sh
+++ b/source/kde/doinst.sh/kbruch
diff --git a/source/kde/kdevelop/doinst.sh b/source/kde/doinst.sh/kcalc
index e376b59a..e376b59a 100644
--- a/source/kde/kdevelop/doinst.sh
+++ b/source/kde/doinst.sh/kcalc
diff --git a/source/kde/kdevplatform/doinst.sh b/source/kde/doinst.sh/kcolorchooser
index e376b59a..e376b59a 100644
--- a/source/kde/kdevplatform/doinst.sh
+++ b/source/kde/doinst.sh/kcolorchooser
diff --git a/source/kde/kdewebdev/doinst.sh b/source/kde/doinst.sh/kde-applications
index e376b59a..e376b59a 100644
--- a/source/kde/kdewebdev/doinst.sh
+++ b/source/kde/doinst.sh/kde-applications
diff --git a/source/kde/doinst.sh/kde-baseapps b/source/kde/doinst.sh/kde-baseapps
new file mode 100644
index 00000000..85ff4d86
--- /dev/null
+++ b/source/kde/doinst.sh/kde-baseapps
@@ -0,0 +1,4 @@
+#!/bin/sh
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
diff --git a/source/kde/kdeaccessibility/doinst.sh b/source/kde/doinst.sh/kde-runtime
index 22d4849b..22d4849b 100644
--- a/source/kde/kdeaccessibility/doinst.sh
+++ b/source/kde/doinst.sh/kde-runtime
diff --git a/source/kde/kdebase-workspace/doinst.sh b/source/kde/doinst.sh/kde-workspace
index 793bae74..793bae74 100644
--- a/source/kde/kdebase-workspace/doinst.sh
+++ b/source/kde/doinst.sh/kde-workspace
diff --git a/source/kde/kdebase-runtime/doinst.sh b/source/kde/doinst.sh/kdeaccessibility
index 22d4849b..22d4849b 100644
--- a/source/kde/kdebase-runtime/doinst.sh
+++ b/source/kde/doinst.sh/kdeaccessibility
diff --git a/source/kde/koffice/doinst.sh b/source/kde/doinst.sh/kdeadmin
index e376b59a..e376b59a 100644
--- a/source/kde/koffice/doinst.sh
+++ b/source/kde/doinst.sh/kdeadmin
diff --git a/source/kde/ktorrent/doinst.sh b/source/kde/doinst.sh/kdeartwork
index e376b59a..e376b59a 100644
--- a/source/kde/ktorrent/doinst.sh
+++ b/source/kde/doinst.sh/kdeartwork
diff --git a/source/kde/doinst.sh/kdebase b/source/kde/doinst.sh/kdebase
new file mode 100644
index 00000000..85ff4d86
--- /dev/null
+++ b/source/kde/doinst.sh/kdebase
@@ -0,0 +1,4 @@
+#!/bin/sh
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
diff --git a/source/kde/skanlite/doinst.sh b/source/kde/doinst.sh/kdeedu
index e376b59a..e376b59a 100644
--- a/source/kde/skanlite/doinst.sh
+++ b/source/kde/doinst.sh/kdeedu
diff --git a/source/kde/doinst.sh/kdegames b/source/kde/doinst.sh/kdegames
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdegames
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdegraphics b/source/kde/doinst.sh/kdegraphics
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdegraphics
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/kdelibs/doinst.sh b/source/kde/doinst.sh/kdelibs
index d7006c70..d7006c70 100644
--- a/source/kde/kdelibs/doinst.sh
+++ b/source/kde/doinst.sh/kdelibs
diff --git a/source/kde/kdemultimedia/doinst.sh b/source/kde/doinst.sh/kdemultimedia
index 22d4849b..22d4849b 100644
--- a/source/kde/kdemultimedia/doinst.sh
+++ b/source/kde/doinst.sh/kdemultimedia
diff --git a/source/kde/kdenetwork/doinst.sh b/source/kde/doinst.sh/kdenetwork
index 22d4849b..22d4849b 100644
--- a/source/kde/kdenetwork/doinst.sh
+++ b/source/kde/doinst.sh/kdenetwork
diff --git a/source/kde/doinst.sh/kdepim b/source/kde/doinst.sh/kdepim
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdepim
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdepim-runtime b/source/kde/doinst.sh/kdepim-runtime
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdepim-runtime
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdeplasma-addons b/source/kde/doinst.sh/kdeplasma-addons
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdeplasma-addons
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdesdk b/source/kde/doinst.sh/kdesdk
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdesdk
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdetoys b/source/kde/doinst.sh/kdetoys
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdetoys
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/kdeutils/doinst.sh b/source/kde/doinst.sh/kdeutils
index 22d4849b..22d4849b 100644
--- a/source/kde/kdeutils/doinst.sh
+++ b/source/kde/doinst.sh/kdeutils
diff --git a/source/kde/doinst.sh/kdevelop b/source/kde/doinst.sh/kdevelop
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdevelop
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdevplatform b/source/kde/doinst.sh/kdevplatform
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdevplatform
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdewebdev b/source/kde/doinst.sh/kdewebdev
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdewebdev
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kdf b/source/kde/doinst.sh/kdf
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kdf
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kgamma b/source/kde/doinst.sh/kgamma
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kgamma
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kgeography b/source/kde/doinst.sh/kgeography
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kgeography
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/khangman b/source/kde/doinst.sh/khangman
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/khangman
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kig b/source/kde/doinst.sh/kig
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kig
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kiten b/source/kde/doinst.sh/kiten
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kiten
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/klettres b/source/kde/doinst.sh/klettres
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/klettres
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kmag b/source/kde/doinst.sh/kmag
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kmag
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kmousetool b/source/kde/doinst.sh/kmousetool
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kmousetool
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kmouth b/source/kde/doinst.sh/kmouth
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kmouth
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kmplot b/source/kde/doinst.sh/kmplot
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kmplot
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/koffice b/source/kde/doinst.sh/koffice
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/koffice
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kolourpaint b/source/kde/doinst.sh/kolourpaint
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kolourpaint
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/konsole b/source/kde/doinst.sh/konsole
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/konsole
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/kopete-cryptography/doinst.sh b/source/kde/doinst.sh/kopete-cryptography
index 22d4849b..22d4849b 100644
--- a/source/kde/kopete-cryptography/doinst.sh
+++ b/source/kde/doinst.sh/kopete-cryptography
diff --git a/source/kde/doinst.sh/kruler b/source/kde/doinst.sh/kruler
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kruler
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/ksaneplugin b/source/kde/doinst.sh/ksaneplugin
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/ksaneplugin
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/ksnapshot b/source/kde/doinst.sh/ksnapshot
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/ksnapshot
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kstars b/source/kde/doinst.sh/kstars
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kstars
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/ktorrent b/source/kde/doinst.sh/ktorrent
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/ktorrent
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/ktouch b/source/kde/doinst.sh/ktouch
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/ktouch
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kturtle b/source/kde/doinst.sh/kturtle
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kturtle
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/kwordquiz b/source/kde/doinst.sh/kwordquiz
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/kwordquiz
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/marble b/source/kde/doinst.sh/marble
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/marble
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/okular b/source/kde/doinst.sh/okular
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/okular
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/parley b/source/kde/doinst.sh/parley
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/parley
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/rocs b/source/kde/doinst.sh/rocs
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/rocs
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/skanlite b/source/kde/doinst.sh/skanlite
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/skanlite
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/step b/source/kde/doinst.sh/step
new file mode 100644
index 00000000..e376b59a
--- /dev/null
+++ b/source/kde/doinst.sh/step
@@ -0,0 +1,5 @@
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/doinst.sh/wicd-kde b/source/kde/doinst.sh/wicd-kde
new file mode 100644
index 00000000..22d4849b
--- /dev/null
+++ b/source/kde/doinst.sh/wicd-kde
@@ -0,0 +1,5 @@
+
+if [ -x usr/bin/update-desktop-database ]; then
+  usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/kde/k3b/k3b.SlackBuild b/source/kde/k3b/k3b.SlackBuild
deleted file mode 100755
index a32bbc74..00000000
--- a/source/kde/k3b/k3b.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-k3b
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf k3b-$VERSION
-echo "Building k3b-$VERSION..."
-tar xvf $CWD/../src/extragear/k3b-$VERSION.tar.?z*
-cd k3b-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir build
-cd build
-cmake \
-  $KDE_OPT_ARGS \
-  -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_INSTALL_PREFIX=/usr \
-  -DMAN_INSTALL_DIR=/usr/man \
-  -DSYSCONF_INSTALL_DIR=/etc/kde \
-  -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-  ..
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-cd -
-
-# Move the dbus configuration files to the proper place:
-mv $PKG/etc/kde/dbus-1 $PKG/etc/
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/k3b-$VERSION
-cp -a \
- AUTHORS COPYING* FAQ INSTALL KNOWNBUGS PERMISSIONS README RELEASE_HOWTO TODO \
- $PKG/usr/doc/k3b-$VERSION
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/k3b-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/k3b/local.options b/source/kde/k3b/local.options
deleted file mode 100644
index 30cc24d0..00000000
--- a/source/kde/k3b/local.options
+++ /dev/null
@@ -1,2 +0,0 @@
-VERSION=2.0.2
-BUILD=2
diff --git a/source/kde/kaudiocreator/kaudiocreator.SlackBuild b/source/kde/kaudiocreator/kaudiocreator.SlackBuild
deleted file mode 100755
index 2a8dfc0f..00000000
--- a/source/kde/kaudiocreator/kaudiocreator.SlackBuild
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kaudiocreator
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib/qt ]; then
-  QTDIR=/usr/lib/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building kaudiocreator-$VERSION..."
-tar xvf $CWD/../src/extragear/kaudiocreator-$VERSION.tar.?z* || exit 1
-cd kaudiocreator-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir build
-cd build
-cmake \
-  $KDE_OPT_ARGS \
-  -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_INSTALL_PREFIX=/usr \
-  -DMAN_INSTALL_DIR=/usr/man \
-  -DSYSCONF_INSTALL_DIR=/etc/kde \
-  ..
-make $NUMJOBS || exit 1
-make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kaudiocreator-$VERSION
-cp -a COPYING* TODO $PKG/usr/doc/kaudiocreator-$VERSION
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n /tmp/kaudiocreator-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kaudiocreator/local.options b/source/kde/kaudiocreator/local.options
deleted file mode 100644
index 758a383e..00000000
--- a/source/kde/kaudiocreator/local.options
+++ /dev/null
@@ -1,2 +0,0 @@
-VERSION=r1212483
-BUILD=1
diff --git a/source/kde/kde-deps-build/PyQt b/source/kde/kde-deps-build/PyQt
new file mode 120000
index 00000000..eb8bcce2
--- /dev/null
+++ b/source/kde/kde-deps-build/PyQt
@@ -0,0 +1 @@
+../../l/PyQt
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/QScintilla b/source/kde/kde-deps-build/QScintilla
new file mode 120000
index 00000000..29ee38cf
--- /dev/null
+++ b/source/kde/kde-deps-build/QScintilla
@@ -0,0 +1 @@
+../../l/QScintilla
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/akonadi b/source/kde/kde-deps-build/akonadi
new file mode 120000
index 00000000..e1a82ac1
--- /dev/null
+++ b/source/kde/kde-deps-build/akonadi
@@ -0,0 +1 @@
+../../l/akonadi
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/alldeps.SlackBuild b/source/kde/kde-deps-build/alldeps.SlackBuild
new file mode 100755
index 00000000..aaf624ae
--- /dev/null
+++ b/source/kde/kde-deps-build/alldeps.SlackBuild
@@ -0,0 +1,73 @@
+#!/bin/sh
+
+# Build (and install) all KDE dependencies
+# Modified from the KDE Slackware script by Eric Hameleers <alien@slackware.com>
+
+
+# Set the config option variables if they are not already set:
+[ -r ./alldeps.options ] && . ./alldeps.options
+
+# This avoids compiling a version number into KDE's .la files:
+QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR
+
+ALLDEPS=" \
+  qt \
+  polkit-qt-1 \
+  sip \
+  PyQt \
+  QScintilla \
+  clucene \
+  raptor2 \
+  rasqal \
+  redland \
+  libatasmart \
+  sg3_utils \
+  udisks \
+  upower \
+  libvncserver \
+  shared-desktop-ontologies \
+  system-config-printer \
+  ebook-tools \
+  herqq \
+  lcms2 \
+  hunspell \
+  libdbusmenu-qt \
+  phonon \
+  phonon-gstreamer \
+  phonon-xine \
+  phonon-mplayer \
+  soprano \
+  akonadi \
+  attica \
+  grantlee \
+  libssh \
+  libbluedevil \
+  strigi \
+  polkit-qt-1 \
+  "
+
+# Allow for specification of individual packages to be built:
+if [ -z "$1" ]; then
+  MODQUEUE=$ALLDEPS
+else
+  MODQUEUE=$*
+fi
+
+for module in \
+  $MODQUEUE ;
+do
+  cd $module
+  ./$module.SlackBuild
+  if [ $? = 0 ]; then
+    # Yes, I will build with the fresh packages installed:
+    upgradepkg --install-new --reinstall /tmp/${module}-*.txz
+    # Keep MIME database current:
+    /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
+    rm -rf /tmp/package-${module} /tmp/${module}-$VERSION
+  else
+    echo "${module} failed to build."
+    exit 1
+  fi
+  cd - ;
+done
+
diff --git a/source/kde/kde-deps-build/attica b/source/kde/kde-deps-build/attica
new file mode 120000
index 00000000..5774de2d
--- /dev/null
+++ b/source/kde/kde-deps-build/attica
@@ -0,0 +1 @@
+../../l/attica
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/clucene b/source/kde/kde-deps-build/clucene
new file mode 120000
index 00000000..49d6537f
--- /dev/null
+++ b/source/kde/kde-deps-build/clucene
@@ -0,0 +1 @@
+../../l/clucene
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/ebook-tools b/source/kde/kde-deps-build/ebook-tools
new file mode 120000
index 00000000..924f1053
--- /dev/null
+++ b/source/kde/kde-deps-build/ebook-tools
@@ -0,0 +1 @@
+../../l/ebook-tools
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/grantlee b/source/kde/kde-deps-build/grantlee
new file mode 120000
index 00000000..ef50546f
--- /dev/null
+++ b/source/kde/kde-deps-build/grantlee
@@ -0,0 +1 @@
+../../l/grantlee
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/herqq b/source/kde/kde-deps-build/herqq
new file mode 120000
index 00000000..2fec17ef
--- /dev/null
+++ b/source/kde/kde-deps-build/herqq
@@ -0,0 +1 @@
+../../l/herqq
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/hunspell b/source/kde/kde-deps-build/hunspell
new file mode 120000
index 00000000..48a5644c
--- /dev/null
+++ b/source/kde/kde-deps-build/hunspell
@@ -0,0 +1 @@
+../../l/hunspell
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/lcms2 b/source/kde/kde-deps-build/lcms2
new file mode 120000
index 00000000..92d62fe7
--- /dev/null
+++ b/source/kde/kde-deps-build/lcms2
@@ -0,0 +1 @@
+../../l/lcms2
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libatasmart b/source/kde/kde-deps-build/libatasmart
new file mode 120000
index 00000000..98c57dc2
--- /dev/null
+++ b/source/kde/kde-deps-build/libatasmart
@@ -0,0 +1 @@
+../../l/libatasmart
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libbluedevil b/source/kde/kde-deps-build/libbluedevil
new file mode 120000
index 00000000..e9fb000f
--- /dev/null
+++ b/source/kde/kde-deps-build/libbluedevil
@@ -0,0 +1 @@
+../../l/libbluedevil
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libdbusmenu-qt b/source/kde/kde-deps-build/libdbusmenu-qt
new file mode 120000
index 00000000..8e368ed1
--- /dev/null
+++ b/source/kde/kde-deps-build/libdbusmenu-qt
@@ -0,0 +1 @@
+../../l/libdbusmenu-qt
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libmsn b/source/kde/kde-deps-build/libmsn
new file mode 120000
index 00000000..3c90de7c
--- /dev/null
+++ b/source/kde/kde-deps-build/libmsn
@@ -0,0 +1 @@
+../../l/libmsn
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libssh b/source/kde/kde-deps-build/libssh
new file mode 120000
index 00000000..bdb8f2fe
--- /dev/null
+++ b/source/kde/kde-deps-build/libssh
@@ -0,0 +1 @@
+../../l/libssh
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/libvncserver b/source/kde/kde-deps-build/libvncserver
new file mode 120000
index 00000000..ebd5804a
--- /dev/null
+++ b/source/kde/kde-deps-build/libvncserver
@@ -0,0 +1 @@
+../../l/libvncserver
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/phonon b/source/kde/kde-deps-build/phonon
new file mode 120000
index 00000000..21fb4086
--- /dev/null
+++ b/source/kde/kde-deps-build/phonon
@@ -0,0 +1 @@
+../../l/phonon
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/phonon-gstreamer b/source/kde/kde-deps-build/phonon-gstreamer
new file mode 120000
index 00000000..a24371c1
--- /dev/null
+++ b/source/kde/kde-deps-build/phonon-gstreamer
@@ -0,0 +1 @@
+../../l/phonon-gstreamer
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/phonon-mplayer b/source/kde/kde-deps-build/phonon-mplayer
new file mode 120000
index 00000000..a9a152ca
--- /dev/null
+++ b/source/kde/kde-deps-build/phonon-mplayer
@@ -0,0 +1 @@
+../../l/phonon-mplayer
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/phonon-xine b/source/kde/kde-deps-build/phonon-xine
new file mode 120000
index 00000000..821c46b7
--- /dev/null
+++ b/source/kde/kde-deps-build/phonon-xine
@@ -0,0 +1 @@
+../../l/phonon-xine
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/polkit-qt-1 b/source/kde/kde-deps-build/polkit-qt-1
new file mode 120000
index 00000000..6d3939cc
--- /dev/null
+++ b/source/kde/kde-deps-build/polkit-qt-1
@@ -0,0 +1 @@
+../../l/polkit-qt-1
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/qt b/source/kde/kde-deps-build/qt
new file mode 120000
index 00000000..0cd9b149
--- /dev/null
+++ b/source/kde/kde-deps-build/qt
@@ -0,0 +1 @@
+../../l/qt
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/raptor2 b/source/kde/kde-deps-build/raptor2
new file mode 120000
index 00000000..40e6fd61
--- /dev/null
+++ b/source/kde/kde-deps-build/raptor2
@@ -0,0 +1 @@
+../../l/raptor2
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/rasqal b/source/kde/kde-deps-build/rasqal
new file mode 120000
index 00000000..b64cf797
--- /dev/null
+++ b/source/kde/kde-deps-build/rasqal
@@ -0,0 +1 @@
+../../l/rasqal
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/redland b/source/kde/kde-deps-build/redland
new file mode 120000
index 00000000..332fccc0
--- /dev/null
+++ b/source/kde/kde-deps-build/redland
@@ -0,0 +1 @@
+../../l/redland
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/sg3_utils b/source/kde/kde-deps-build/sg3_utils
new file mode 120000
index 00000000..b4679644
--- /dev/null
+++ b/source/kde/kde-deps-build/sg3_utils
@@ -0,0 +1 @@
+../../l/sg3_utils
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/shared-desktop-ontologies b/source/kde/kde-deps-build/shared-desktop-ontologies
new file mode 120000
index 00000000..bd7f337b
--- /dev/null
+++ b/source/kde/kde-deps-build/shared-desktop-ontologies
@@ -0,0 +1 @@
+../../l/shared-desktop-ontologies
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/sip b/source/kde/kde-deps-build/sip
new file mode 120000
index 00000000..aa65a76f
--- /dev/null
+++ b/source/kde/kde-deps-build/sip
@@ -0,0 +1 @@
+../../l/sip
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/soprano b/source/kde/kde-deps-build/soprano
new file mode 120000
index 00000000..211c3a03
--- /dev/null
+++ b/source/kde/kde-deps-build/soprano
@@ -0,0 +1 @@
+../../l/soprano
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/strigi b/source/kde/kde-deps-build/strigi
new file mode 120000
index 00000000..35a85f08
--- /dev/null
+++ b/source/kde/kde-deps-build/strigi
@@ -0,0 +1 @@
+../../l/strigi
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/system-config-printer b/source/kde/kde-deps-build/system-config-printer
new file mode 120000
index 00000000..0f98bcc6
--- /dev/null
+++ b/source/kde/kde-deps-build/system-config-printer
@@ -0,0 +1 @@
+../../l/system-config-printer
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/udisks b/source/kde/kde-deps-build/udisks
new file mode 120000
index 00000000..2059f595
--- /dev/null
+++ b/source/kde/kde-deps-build/udisks
@@ -0,0 +1 @@
+../../a/udisks
\ No newline at end of file
diff --git a/source/kde/kde-deps-build/upower b/source/kde/kde-deps-build/upower
new file mode 120000
index 00000000..18c0e047
--- /dev/null
+++ b/source/kde/kde-deps-build/upower
@@ -0,0 +1 @@
+../../a/upower
\ No newline at end of file
diff --git a/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild b/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild
deleted file mode 100755
index 0f65ef6b..00000000
--- a/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeaccessibility
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeaccessibility-$VERSION..."
-tar xvf $CWD/../src/kdeaccessibility-$VERSION.tar.?z* || exit 1
-cd kdeaccessibility-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeaccessibility-$VERSION
-cp -a COPYING* $PKG/usr/doc/kdeaccessibility-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeaccessibility-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdeaccessibility/slack-desc b/source/kde/kdeaccessibility/slack-desc
deleted file mode 100644
index 91669ef7..00000000
--- a/source/kde/kdeaccessibility/slack-desc
+++ /dev/null
@@ -1,20 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-kdeaccessibility: kdeaccessibility (Accessibility programs for KDE)
-kdeaccessibility:
-kdeaccessibility: KDE accessibility programs, including kmag (a screen magnifier),
-kdeaccessibility: kmousetool (clicks the mouse for you), and kmouth (a speech
-kdeaccessibility: synthesizer frontend).
-kdeaccessibility:
-kdeaccessibility:
-kdeaccessibility:
-kdeaccessibility:
-kdeaccessibility:
-kdeaccessibility:
-kdeaccessibility:
diff --git a/source/kde/kdeadmin/kdeadmin.SlackBuild b/source/kde/kdeadmin/kdeadmin.SlackBuild
deleted file mode 100755
index 621d03c2..00000000
--- a/source/kde/kdeadmin/kdeadmin.SlackBuild
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeadmin
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeadmin-$VERSION..."
-tar xvf $CWD/../src/kdeadmin-$VERSION.tar.?z* || exit 1
-cd kdeadmin-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-zcat $CWD/knetworkconf.diff.gz | patch -p1 --verbose || exit 1
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    --with-shadow \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DKU_FIRSTGID=1000 \
-    -DKU_FIRSTUID=1000 \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeadmin-$VERSION
-cp -a AUTHORS COPYING* README $PKG/usr/doc/kdeadmin-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeadmin-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdeadmin/knetworkconf.diff b/source/kde/kdeadmin/knetworkconf.diff
deleted file mode 100644
index 425499d1..00000000
--- a/source/kde/kdeadmin/knetworkconf.diff
+++ /dev/null
@@ -1,147 +0,0 @@
---- ./knetworkconf/backends/platform.pl.cmake.orig	2010-07-06 01:54:42.000000000 -0500
-+++ ./knetworkconf/backends/platform.pl.cmake	2011-03-13 16:43:44.000000000 -0500
-@@ -93,6 +93,10 @@
-   "slackware-9.1.0" => "Slackware 9.1.0",
-   "slackware-10.0.0" => "Slackware 10.0.0",
-   "slackware-10.1.0" => "Slackware 10.1.0",
-+  "slackware-12.2.0" => "Slackware 12.2.0",
-+  "slackware-13.0.0.0.0" => "Slackware 13.0.0.0.0",
-+  "slackware-13.1.0" => "Slackware 13.1.0",
-+  "slackware-13.37.0" => "Slackware 13.37.0",
-   "freebsd-4"       => "FreeBSD 4",
-   "freebsd-5"       => "FreeBSD 5",
-   "freebsd-6"       => "FreeBSD 6",
---- ./knetworkconf/backends/network-conf.cmake.orig	2010-07-06 01:54:42.000000000 -0500
-+++ ./knetworkconf/backends/network-conf.cmake	2011-03-13 16:43:13.000000000 -0500
-@@ -77,7 +77,9 @@
-               "mandriva-2006.1", "mandriva-2007.0", "mandriva-2007.1", "mandriva-2008.0", "mandriva-2008.1",
- 	      "mandriva-2009.0", "mandriva-2009.1", "mandriva-2010.0",
-               "vine-3.0", "vine-3.1",
--              "slackware-9.1.0", "slackware-10.0.0", "slackware-10.1.0",
-+              "slackware-9.1.0", "slackware-10.0.0", "slackware-10.1.0", "slackware-12.2.0", "slackware-13.0.0.0.0",
-+              "slackware-13.1.0",
-+              "slackware-13.37.0",
- 	      "freebsd-5", "freebsd-6", "freebsd-7", "freebsd-8", "freebsd-9",
-               "gentoo", "vlos-1.2", "ark");
- 
---- ./knetworkconf/backends/service.pl.cmake.orig	2010-07-06 01:54:42.000000000 -0500
-+++ ./knetworkconf/backends/service.pl.cmake	2011-03-13 16:42:51.000000000 -0500
-@@ -281,6 +281,10 @@
-      "slackware-9.1.0" => "slackware-9.1.0",
-      "slackware-10.0.0" => "slackware-9.1.0",
-      "slackware-10.1.0" => "slackware-9.1.0",
-+     "slackware-12.2.0" => "slackware-9.1.0",
-+     "slackware-13.0.0.0.0" => "slackware-9.1.0",
-+     "slackware-13.1.0" => "slackware-9.1.0",
-+     "slackware-13.37.0" => "slackware-9.1.0",
- 
-      "gentoo"         => "gentoo",
-      "vlos-1.2"       => "gentoo",
-@@ -317,7 +321,11 @@
-                       "nonetwork" => "RECOVER"
-                      },
-      "freebsd-5"  => {"rc" => "GRAPHICAL" },
--     "slackware-9.1.0" => {"4" => "GRAPHICAL" }
-+     "slackware-9.1.0" => {"0" => "HALT",
-+                           "3" => "NONE",
-+                           "4" => "GRAPHICAL",
-+                           "6" => "REBOOT"
-+                          }
-     );
- 
-   $distro = $dist_map{$gst_dist};
---- ./knetworkconf/backends/network.pl.cmake.orig	2010-07-06 01:54:42.000000000 -0500
-+++ ./knetworkconf/backends/network.pl.cmake	2011-03-13 16:42:24.000000000 -0500
-@@ -528,6 +528,10 @@
-        "slackware-9.1.0" => "redhat-6.2",
-        "slackware-10.0.0" => "redhat-6.2",
-        "slackware-10.1.0" => "redhat-6.2",
-+       "slackware-12.2.0" => "redhat-6.2",
-+       "slackware-13.0.0.0.0" => "redhat-6.2",
-+       "slackware-13.1.0" => "redhat-6.2",
-+       "slackware-13.37.0" => "redhat-6.2",
-        "gentoo"       => "debian-2.2",
-        "vlos-1.2"     => "debian-2.2",
-        "freebsd-5"    => "debian-2.2",
-@@ -1833,6 +1837,10 @@
- 	  "slackware-9.1.0" => \&gst_network_deb22_get_file,
- 	  "slackware-10.0.0" => \&gst_network_deb22_get_file,
- 	  "slackware-10.1.0" => \&gst_network_deb22_get_file,
-+	  "slackware-12.2.0" => \&gst_network_deb22_get_file,
-+	  "slackware-13.0.0.0.0" => \&gst_network_deb22_get_file,
-+	  "slackware-13.1.0" => \&gst_network_deb22_get_file,
-+	  "slackware-13.37.0" => \&gst_network_deb22_get_file,
- 	  "gentoo"       => \&gst_network_deb22_get_file,
- 	  "freebsd-5"    => \&gst_network_deb22_get_file,
- 	  "freebsd-6"    => \&gst_network_deb22_get_file,
-@@ -3958,6 +3966,10 @@
- 	  "slackware-9.1.0" => "",
- 	  "slackware-10.0.0" => "",
- 	  "slackware-10.1.0" => "",
-+	  "slackware-12.2.0" => "",
-+	  "slackware-13.0.0.0.0" => "",
-+	  "slackware-13.1.0" => "",
-+	  "slackware-13.37.0" => "",
- 	  "gentoo"       => "",
- 	  "vlos-1.2"     => "",
- 	  "freebsd-5"    => "",
-@@ -4109,6 +4121,10 @@
- 	  "slackware-9.1.0" => "slackware-9.1.0",
- 	  "slackware-10.0.0" => "slackware-9.1.0",
- 	  "slackware-10.1.0" => "slackware-9.1.0",
-+	  "slackware-12.2.0" => "slackware-9.1.0",
-+	  "slackware-13.0.0.0.0" => "slackware-9.1.0",
-+	  "slackware-13.1.0" => "slackware-9.1.0",
-+	  "slackware-13.37.0" => "slackware-9.1.0",
- 	  "gentoo"       => "gentoo",
- 	  "vlos-1.2"     => "vlos-1.2",
- 	  "freebsd-5"    => "freebsd-5",
-@@ -4395,6 +4411,7 @@
-        [ "hostname",      \&gst_parse_fq_hostname, HOSTNAME ],
-        [ "nameserver",    \&gst_parse_split_all_unique_hash_comment, RESOLV_CONF,  "nameserver", "[ \t]+" ],
-        [ "searchdomain",  \&gst_parse_split_first_array_unique, RESOLV_CONF,  "search", "[ \t]+", "[ \t]+" ],
-+       [ "domain",        \&gst_parse_fq_domain,   HOSTNAME ],
-        [ "domain",        \&gst_parse_split_first_str,   RESOLV_CONF,  "domain", "[ \t]+" ],
-        [ "order",         \&gst_parse_split_first_array, HOST_CONF,    "order", "[ \t]+", ",[ \t]*" ],
-        [ "hostmatch",     \&gst_parse_split_first_bool,  HOST_CONF,    "multi", "[ \t]+" ],
-@@ -4611,6 +4628,10 @@
- 	  "slackware-9.1.0" => "slackware-9.1.0",
- 	  "slackware-10.0.0" => "slackware-9.1.0",
- 	  "slackware-10.1.0" => "slackware-9.1.0",
-+	  "slackware-12.2.0" => "slackware-9.1.0",
-+	  "slackware-13.0.0.0.0" => "slackware-9.1.0",
-+	  "slackware-13.1.0" => "slackware-9.1.0",
-+	  "slackware-13.37.0" => "slackware-9.1.0",
- 	  "gentoo"       => "gentoo",
- 	  "vlos-1.2"     => "vlos-1.2",
- 	  "freebsd-5"    => "freebsd-5",
-@@ -5508,6 +5529,10 @@
- 	  "slackware-9.1.0" => "slackware-9.1.0",
- 	  "slackware-10.0.0" => "slackware-9.1.0",
- 	  "slackware-10.1.0" => "slackware-9.1.0",
-+	  "slackware-12.2.0" => "slackware-9.1.0",
-+	  "slackware-13.0.0.0.0" => "slackware-9.1.0",
-+	  "slackware-13.1.0" => "slackware-9.1.0",
-+	  "slackware-13.37.0" => "slackware-9.1.0",
- 	  "gentoo"       => "gentoo",
- 	  "vlos-1.2"     => "vlos-1.2",
- 	  "freebsd-5"    => "freebsd-5",
-@@ -5781,6 +5806,7 @@
-        [ "hostname",      \&gst_replace_fq_hostname, HOSTNAME, "%hostname%", "%domain%" ],
-        [ "hostname",      \&gst_network_run_hostname ],
-        [ "gateway",       \&gst_replace_rcinet1conf_global, RC_INET_CONF, GATEWAY ],
-+       [ "domain",        \&gst_parse_fq_domain,   HOSTNAME ],
-        [ "domain",        \&gst_replace_join_first_str,   RESOLV_CONF, "domain", "[ \t]+" ],
-        [ "nameserver",    \&gst_replace_join_all,         RESOLV_CONF, "nameserver", "[ \t]+" ],
-        [ "searchdomain",  \&gst_replace_join_first_array, RESOLV_CONF, "search", "[ \t]+", "[ \t]+" ],
-@@ -5960,6 +5986,10 @@
- 	  "slackware-9.1.0" => "slackware-9.1.0",
- 	  "slackware-10.0.0" => "slackware-9.1.0",
- 	  "slackware-10.1.0" => "slackware-9.1.0",
-+	  "slackware-12.2.0" => "slackware-9.1.0",
-+	  "slackware-13.0.0.0.0" => "slackware-9.1.0",
-+	  "slackware-13.1.0" => "slackware-9.1.0",
-+	  "slackware-13.37.0" => "slackware-9.1.0",
- 	  "gentoo"       => "gentoo",
- 	  "vlos-1.2"     => "vlos-1.2",
- 	  "freebsd-5"    => "freebsd-5",
diff --git a/source/kde/kdeadmin/local.options b/source/kde/kdeadmin/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdeadmin/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdeartwork/kdeartwork.SlackBuild b/source/kde/kdeartwork/kdeartwork.SlackBuild
deleted file mode 100755
index 02c197e8..00000000
--- a/source/kde/kdeartwork/kdeartwork.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeartwork
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeartwork-$VERSION..."
-tar xvf $CWD/../src/kdeartwork-$VERSION.tar.?z* || exit 1
-cd kdeartwork-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DKSCREENSAVER_SOUND_SUPPORT=ON \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeartwork-$VERSION
-cp -a COPYING* README $PKG/usr/doc/kdeartwork-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeartwork-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdeartwork/local.options b/source/kde/kdeartwork/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdeartwork/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild b/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild
deleted file mode 100755
index 0b2cddc8..00000000
--- a/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdebase-runtime
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdebase-runtime-$VERSION..."
-tar xvf $CWD/../src/kdebase-runtime-$VERSION.tar.?z* || exit 1
-cd kdebase-runtime-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-# Create a symlink in /usr/bin to the kdesu binary
-( cd $PKG/usr/bin ; ln -s /usr/lib${LIBDIRSUFFIX}/kde4/libexec/kdesu . )
-
-# Remove the hicolor icon theme index.theme so it doesn't clobber the real one
-rm -f $PKG/usr/share/icons/hicolor/index.theme
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdebase-runtime-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdebase-runtime/local.options b/source/kde/kdebase-runtime/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdebase-runtime/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild b/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild
deleted file mode 100755
index 91b27dd3..00000000
--- a/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdebase-workspace
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdebase-workspace-$VERSION..."
-tar xvf $CWD/../src/kdebase-workspace-$VERSION.tar.?z* || exit 1
-cd kdebase-workspace-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Increase the timeout to accomodate slow-to-initialize video chipset drivers:
-zcat $CWD/kdebase-workspace.kdm.server.timeout.diff.gz | patch -p1 --verbose || exit 1
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-# Use ck-launch-session in runlevel 3,
-# to start and attach a ConsoleKit session to the X session:
-mkdir -p $PKG/etc/X11/xinit
-cat $CWD/xinit/xinitrc.kde > $PKG/etc/X11/xinit/xinitrc.kde
-chmod 0755 $PKG/etc/X11/xinit/xinitrc.kde
-
-# Setup config files for KDM:
-$PKG/usr/bin/genkdmconf --no-old --no-old-scripts --no-backup --in $PKG/usr/share/config/kdm
-
-# Not allowing root to login at the console is just plain silly.  If they 
-# have physical access to the machine, what's the point of trying to stop 
-# this?  Even the kdmrc file says this is supposed to be the default.
-sed -i 's/AllowRootLogin=false/AllowRootLogin=true/' \
-  $PKG/usr/share/config/kdm/kdmrc 
-# We are also not ready to create a separate 'kdm' non-root user:
-sed -i 's/GreeterUID=kdm/#&/' \
-  $PKG/usr/share/config/kdm/kdmrc 
-mv $PKG/usr/share/config/kdm/kdmrc $PKG/usr/share/config/kdm/kdmrc.new
-
-cp -a $PKG/usr/share/config/kdm/Xsession $PKG/usr/share/config/kdm/Xsession.orig
-cat $CWD/config/Xsession | sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" \
-  > $PKG/usr/share/config/kdm/Xsession
-mv $PKG/usr/share/config/kdm/backgroundrc $PKG/usr/share/config/kdm/backgroundrc.new
-
-# Move the KDM files someplace FHS compliant:
-mkdir -p $PKG/etc/kde
-mv $PKG/usr/share/config/kdm $PKG/etc/kde
-( cd $PKG/usr/share/config ; ln -sf ../../../etc/kde/kdm . )
-
-# Move the polkit dbus configuration files to the proper place:
-mv $PKG/etc/kde/dbus-1 $PKG/etc/
-
-# This is fubar:
-rm -f $PKG/usr/share/icons/hicolor/index.theme
-
-mkdir -p $PKG/usr/doc/kdebase-workspace-$VERSION
-cp -a COPYING* README $PKG/usr/doc/kdebase-workspace-$VERSION
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdebase-workspace-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdebase-workspace/slack-desc b/source/kde/kdebase-workspace/slack-desc
deleted file mode 100644
index 87f2c418..00000000
--- a/source/kde/kdebase-workspace/slack-desc
+++ /dev/null
@@ -1,12 +0,0 @@
-                 |-----handy-ruler------------------------------------------------------|
-kdebase-workspace: kdebase-workspace (KDE Plasma Desktop)
-kdebase-workspace:
-kdebase-workspace: This package provides the essential parts of the KDE Plasma Desktop
-kdebase-workspace: that are presented to the user.
-kdebase-workspace:
-kdebase-workspace:
-kdebase-workspace:
-kdebase-workspace:
-kdebase-workspace:
-kdebase-workspace:
-kdebase-workspace:
diff --git a/source/kde/kdebase/config/kdeglobals b/source/kde/kdebase/config/kdeglobals
deleted file mode 100644
index 25d44611..00000000
--- a/source/kde/kdebase/config/kdeglobals
+++ /dev/null
@@ -1,4 +0,0 @@
-[General]
-XftAntialias=true
-XftHintStyle=hintmedium
-XftSubPixel=none
diff --git a/source/kde/kdebase/kdebase.SlackBuild b/source/kde/kdebase/kdebase.SlackBuild
deleted file mode 100755
index 53732fb5..00000000
--- a/source/kde/kdebase/kdebase.SlackBuild
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdebase
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdebase-$VERSION..."
-tar xvf $CWD/../src/kdebase-$VERSION.tar.?z* || exit 1
-cd kdebase-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# patch a problem where closing a konsole tab breaks the right-click context menu:
-zcat $CWD/konsole_right_click-185466.patch.gz | patch --verbose -p2 || exit 1
-zcat $CWD/konsole_right_click-185466.patch.patch.gz | patch --verbose -p1 || exit 1
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DRUN_KAPPFINDER=ON \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-# Add profile scripts
-mkdir -p $PKG/etc/profile.d
-cat $CWD/profile.d/kde.sh | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" \
-  > $PKG/etc/profile.d/kde.sh
-cat $CWD/profile.d/kde.csh | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" \
-  > $PKG/etc/profile.d/kde.csh
-chmod 0755 $PKG/etc/profile.d/*
-
-# "konsole -ls" is no longer valid syntax for konsole, even though it's
-# still documented in the help manual.  Here's a way to get the same
-# thing, and it works here, but I honestly don't know how it will act
-# everywhere with every shell.  I just know it works with bash and ksh
-sed -i -e 's/Exec=konsole/Exec=konsole -e $SHELL -l/' \
-  $PKG/usr/share/applications/kde4/konsole.desktop
- 
-## I find this a little bit too bright...  <change by pjv>
-## Change the konsole defaults to look like the real Linux console:
-#sed -i 's/ColorScheme=Linux/ColorScheme=WhiteOnBlack/' \
-#  $PKG/usr/share/apps/konsole/Shell.profile
-
-mkdir -p $PKG/usr/doc/kdebase-$VERSION
-cp -a AUTHORS COPYING* README $PKG/usr/doc/kdebase-$VERSION || true
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdebase-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdebase/konsole_right_click-185466.patch b/source/kde/kdebase/konsole_right_click-185466.patch
deleted file mode 100644
index a3e19ab5..00000000
--- a/source/kde/kdebase/konsole_right_click-185466.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-Index: tmp/kdebase-4.5.5/apps/konsole/src/MainWindow.cpp
-===================================================================
---- tmp.orig/kdebase-4.5.5/apps/konsole/src/MainWindow.cpp
-+++ tmp/kdebase-4.5.5/apps/konsole/src/MainWindow.cpp
-@@ -86,6 +86,8 @@ MainWindow::MainWindow()
-     connect( _viewManager , SIGNAL(empty()) , this , SLOT(close()) );
-     connect( _viewManager , SIGNAL(activeViewChanged(SessionController*)) , this ,
-             SLOT(activeViewChanged(SessionController*)) );
-+    connect( _viewManager , SIGNAL(unplugController(SessionController*)) , this ,
-+            SLOT(disconnectController(SessionController*)) );
-     connect( _viewManager , SIGNAL(viewPropertiesChanged(const QList<ViewProperties*>&)) ,
-            bookmarkHandler() , SLOT(setViews(const QList<ViewProperties*>&)) );
- 
-Index: tmp/kdebase-4.5.5/apps/konsole/src/MainWindow.h
-===================================================================
---- tmp.orig/kdebase-4.5.5/apps/konsole/src/MainWindow.h
-+++ tmp/kdebase-4.5.5/apps/konsole/src/MainWindow.h
-@@ -161,6 +161,7 @@ class MainWindow : public KXmlGuiWindow
-         void showShortcutsDialog();
-         void newFromProfile(Profile::Ptr profile);
-         void activeViewChanged(SessionController* controller);
-+        void disconnectController(SessionController* controller);
-         void activeViewTitleChanged(ViewProperties*);
- 
-         void sessionListChanged(const QList<QAction*>& actions);
-@@ -179,7 +180,6 @@ class MainWindow : public KXmlGuiWindow
-         void setupActions();
-         void setupWidgets();
-         QString activeSessionDir() const;
--        void disconnectController(SessionController* controller);
- 
-         // sets the active shortcuts of actions in 'dest' to the shortcuts of actions
-         // with the same name in 'source' (see KAction::ActiveShortcut)
-Index: tmp/kdebase-4.5.5/apps/konsole/src/ViewManager.cpp
-===================================================================
---- tmp.orig/kdebase-4.5.5/apps/konsole/src/ViewManager.cpp
-+++ tmp/kdebase-4.5.5/apps/konsole/src/ViewManager.cpp
-@@ -376,6 +376,10 @@ void ViewManager::sessionFinished()
-         }
-     }
- 
-+    // This is needed to remove this controller from factory() in
-+    // order to prevent BUG: 185466 - disappearing menu popup
-+    if (_pluggedController)
-+        emit unplugController(_pluggedController);
- }
- 
- void ViewManager::focusActiveView()
-@@ -744,6 +748,9 @@ void ViewManager::viewCloseRequest(QWidg
-         focusActiveView();
-         updateDetachViewState();
-     }
-+    if (_pluggedController)
-+        emit unplugController(_pluggedController);
-+
- }
- 
- TerminalDisplay* ViewManager::createTerminalDisplay(Session* session)
-Index: tmp/kdebase-4.5.5/apps/konsole/src/ViewManager.h
-===================================================================
---- tmp.orig/kdebase-4.5.5/apps/konsole/src/ViewManager.h
-+++ tmp/kdebase-4.5.5/apps/konsole/src/ViewManager.h
-@@ -175,6 +175,12 @@ signals:
-     void activeViewChanged(SessionController* controller);
- 
-     /**
-+     * Emitted when the current session needs to be unplugged from factory().
-+     * @param controller The controller associated with the view
-+     */
-+    void unplugController(SessionController* controller);
-+
-+    /**
-      * Emitted when the list of view properties ( as returned by viewProperties() ) changes.
-      * This occurs when views are added to or removed from the active container, or 
-      * if the active container is changed.
-Index: tmp/kdebase-4.5.5/apps/konsole/src/ViewContainer.cpp
-===================================================================
---- tmp.orig/kdebase-4.5.5/apps/konsole/src/ViewContainer.cpp
-+++ tmp/kdebase-4.5.5/apps/konsole/src/ViewContainer.cpp
-@@ -448,6 +448,7 @@ TabbedViewContainer::TabbedViewContainer
-     _closeTabButton->setIcon(KIcon("tab-close"));
-     _closeTabButton->adjustSize();
-     _closeTabButton->setHidden(true);
-+    _closeTabButton->setEnabled(false);
- 
-     connect( _tabBar , SIGNAL(currentChanged(int)) , this , SLOT(currentTabChanged(int)) );
-     connect( _tabBar , SIGNAL(tabDoubleClicked(int)) , this , SLOT(tabDoubleClicked(int)) );
-@@ -500,9 +501,11 @@ TabbedViewContainer::TabbedViewContainer
-         i18nc("@action:inmenu", "&Rename Tab..."), this,
-         SLOT(tabContextMenuRenameTab()));
- 
-+/* bug 185466
-     _contextPopupMenu->addAction(KIcon("tab-close"),
-         i18nc("@action:inmenu", "&Close Tab"), this,
-         SLOT(tabContextMenuCloseTab()));
-+*/
- 
- }
- void TabbedViewContainer::setNewViewMenu(QMenu* menu)
diff --git a/source/kde/kdebase/konsole_right_click-185466.patch.patch b/source/kde/kdebase/konsole_right_click-185466.patch.patch
deleted file mode 100644
index 8e6f6c68..00000000
--- a/source/kde/kdebase/konsole_right_click-185466.patch.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./apps/konsole/src/ViewContainer.cpp.orig	2011-04-04 15:05:38.000000000 -0500
-+++ ./apps/konsole/src/ViewContainer.cpp	2011-04-04 15:08:58.000000000 -0500
-@@ -448,7 +448,7 @@
-     _closeTabButton->setIcon(KIcon("tab-close"));
-     _closeTabButton->adjustSize();
-     _closeTabButton->setHidden(true);
--    _closeTabButton->setEnabled(false);
-+    _closeTabButton->setEnabled(true);
- 
-     connect( _tabBar , SIGNAL(currentChanged(int)) , this , SLOT(currentTabChanged(int)) );
-     connect( _tabBar , SIGNAL(tabDoubleClicked(int)) , this , SLOT(tabDoubleClicked(int)) );
diff --git a/source/kde/kdebase/local.options b/source/kde/kdebase/local.options
deleted file mode 100644
index a837340d..00000000
--- a/source/kde/kdebase/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=3
diff --git a/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff b/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff
deleted file mode 100644
index 0f2edc12..00000000
--- a/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff
+++ /dev/null
@@ -1,207 +0,0 @@
---- kdebindings-4.3.0/ruby/krossruby/rubyfunction.h.org	2008-07-29 05:47:40.000000000 -0600
-+++ kdebindings-4.3.0/ruby/krossruby/rubyfunction.h	2009-08-09 03:04:00.105143195 -0600
-@@ -88,11 +88,11 @@
-                 //#endif
-                 VALUE info = rb_gv_get("$!");
-                 VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0);
--                VALUE message = RARRAY(bt)->ptr[0];
-+                VALUE message = RARRAY_PTR(bt)[0];
-                 fprintf(stderr,"%s: %s (%s)\n", STR2CSTR(message), STR2CSTR(rb_obj_as_string(info)), rb_class2name(CLASS_OF(info)));
--                for(int i = 1; i < RARRAY(bt)->len; ++i)
--                    if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING )
--                        fprintf(stderr,"\tfrom %s\n", STR2CSTR(RARRAY(bt)->ptr[i]));
-+                for(int i = 1; i < RARRAY_LEN(bt); ++i)
-+                    if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING )
-+                        fprintf(stderr,"\tfrom %s\n", STR2CSTR(RARRAY_PTR(bt)[i]));
-                 //ruby_nerrs++;
-                 return Qnil;
-             }
---- kdebindings-4.3.0/ruby/krossruby/rubyobject.cpp.org	2008-06-18 06:41:05.000000000 -0600
-+++ kdebindings-4.3.0/ruby/krossruby/rubyobject.cpp	2009-08-08 21:55:21.209147733 -0600
-@@ -34,7 +34,7 @@
- 
-     VALUE info = rb_gv_get("$!");
-     VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0);
--    VALUE message = RARRAY(bt)->ptr[0];
-+    VALUE message = RARRAY_PTR(bt)[0];
- 
-     QString errormessage = QString("%1: %2 (%3)")
-                             .arg( STR2CSTR(message) )
-@@ -43,9 +43,9 @@
-     fprintf(stderr, "%s\n", errormessage.toLatin1().data());
- 
-     QString tracemessage;
--    for(int i = 1; i < RARRAY(bt)->len; ++i) {
--        if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING ) {
--            QString s = QString("%1\n").arg( STR2CSTR(RARRAY(bt)->ptr[i]) );
-+    for(int i = 1; i < RARRAY_LEN(bt); ++i) {
-+        if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING ) {
-+            QString s = QString("%1\n").arg( STR2CSTR(RARRAY_PTR(bt)[i]) );
-             Q_ASSERT( ! s.isNull() );
-             tracemessage += s;
-             fprintf(stderr, "\t%s", s.toLatin1().data());
-@@ -74,7 +74,7 @@
-     ID functionId = rb_ary_entry(args, 1);
-     VALUE arguments = rb_ary_entry(args, 2);
-     Q_ASSERT( TYPE(arguments) == T_ARRAY );
--    return rb_funcall2(self, functionId, RARRAY(arguments)->len, RARRAY(arguments)->ptr);
-+    return rb_funcall2(self, functionId, RARRAY_LEN(arguments), RARRAY_PTR(arguments));
- }
- 
- class RubyObject::Private
-@@ -112,8 +112,8 @@
-     VALUE methods;
-     const char* method;
-     methods = rb_class_instance_methods(1, args, CLASS_OF(object));
--    for (int i = 0; i < RARRAY(methods)->len; i++) {
--        method = StringValuePtr(RARRAY(methods)->ptr[i]);
-+    for (int i = 0; i < RARRAY_LEN(methods); i++) {
-+        method = StringValuePtr(RARRAY_PTR(methods)[i]);
-         krossdebug( QString("RubyObject::RubyObject() method=%1").arg( method ));
-         d->calls << method;
-     }
---- kdebindings-4.3.0/ruby/krossruby/rubyscript.cpp.org	2009-01-16 08:04:29.000000000 -0700
-+++ kdebindings-4.3.0/ruby/krossruby/rubyscript.cpp	2009-08-08 21:51:36.729148567 -0600
-@@ -47,7 +47,7 @@
- 
-     VALUE info = rb_gv_get("$!");
-     VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0);
--    VALUE message = RARRAY(bt)->ptr[0];
-+    VALUE message = RARRAY_PTR(bt)[0];
- 
-     QString errormessage = QString("%1: %2 (%3)")
-                             .arg( STR2CSTR(message) )
-@@ -56,9 +56,9 @@
-     fprintf(stderr, "%s\n", errormessage.toLatin1().data());
- 
-     QString tracemessage;
--    for(int i = 1; i < RARRAY(bt)->len; ++i) {
--        if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING ) {
--            QString s = QString("%1\n").arg( STR2CSTR(RARRAY(bt)->ptr[i]) );
-+    for(int i = 1; i < RARRAY_LEN(bt); ++i) {
-+        if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING ) {
-+            QString s = QString("%1\n").arg( STR2CSTR(RARRAY_PTR(bt)[i]) );
-             Q_ASSERT( ! s.isNull() );
-             tracemessage += s;
-             fprintf(stderr, "\t%s", s.toLatin1().data());
-@@ -361,7 +361,7 @@
-     ID functionId = rb_ary_entry(args, 1);
-     VALUE arguments = rb_ary_entry(args, 2);
-     Q_ASSERT( TYPE(arguments) == T_ARRAY );
--    return rb_funcall2(self, functionId, RARRAY(arguments)->len, RARRAY(arguments)->ptr);
-+    return rb_funcall2(self, functionId, RARRAY_LEN(arguments), RARRAY_PTR(arguments));
- }
- 
- QVariant RubyScript::callFunction(const QString& name, const QVariantList& args)
---- kdebindings-4.3.0/ruby/krossruby/rubyvariant.cpp.org	2008-11-19 03:17:32.000000000 -0700
-+++ kdebindings-4.3.0/ruby/krossruby/rubyvariant.cpp	2009-08-08 21:42:27.593112416 -0600
-@@ -487,7 +487,7 @@
-                 #endif
-                 QList<void*> list;
-                 if( TYPE(value) == T_ARRAY ) {
--                    for(int i = 0; i < RARRAY(value)->len; i++)
-+                    for(int i = 0; i < RARRAY_LEN(value); i++)
-                         if( void *ptr = VoidList::extractVoidStar(rb_ary_entry(value, i)) )
-                             list << ptr;
-                 }
---- kdebindings-4.3.0/ruby/krossruby/rubyvariant.h.org	2008-07-29 05:47:40.000000000 -0600
-+++ kdebindings-4.3.0/ruby/krossruby/rubyvariant.h	2009-08-09 02:51:01.845117051 -0600
-@@ -124,7 +124,7 @@
-                 case T_BIGNUM:
-                     return rb_big2int(value);
-                 case T_FLOAT:
--                    return (int)(RFLOAT(value)->value);
-+                    return (int)(RFLOAT_VALUE(value));
-                 default:
-                     break;
-             }
-@@ -147,7 +147,7 @@
-                 case T_BIGNUM:
-                     return rb_big2uint(value);
-                 case T_FLOAT:
--                    return (uint)(RFLOAT(value)->value);
-+                    return (uint)(RFLOAT_VALUE(value));
-                 default:
-                     break;
-             }
-@@ -226,7 +226,7 @@
-                 //return STR2CSTR( rb_inspect(value) );
-                 return QByteArray("");
-             }
--            long length = LONG2NUM( RSTRING(value)->len );
-+            long length = LONG2NUM( RSTRING_LEN(value) );
-             if( length < 0 )
-                 return QByteArray("");
-             char* ca = rb_str2cstr(value, &length);
-@@ -261,7 +261,7 @@
-             return l;
-         }
-         inline static QSize toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) {
-                 rb_raise(rb_eTypeError, "QSize must be an array with 2 elements");
-                 return QSize();
-             }
-@@ -280,7 +280,7 @@
-             return l;
-         }
-         inline static QSizeF toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) {
-                 rb_raise(rb_eTypeError, "QSizeF must be an array with 2 elements");
-                 return QSizeF();
-             }
-@@ -300,7 +300,7 @@
-             return l;
-         }
-         inline static QPoint toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) {
-                 rb_raise(rb_eTypeError, "QPoint must be an array with 2 elements");
-                 return QPoint();
-             }
-@@ -319,7 +319,7 @@
-             return l;
-         }
-         inline static QPointF toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) {
-                 rb_raise(rb_eTypeError, "QPointF must be an array with 2 elements");
-                 return QPointF();
-             }
-@@ -340,7 +340,7 @@
-             return l;
-         }
-         inline static QRect toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 4 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 4 ) {
-                 rb_raise(rb_eTypeError, "QRect must be an array with 4 elements");
-                 return QRect();
-             }
-@@ -362,7 +362,7 @@
-             return l;
-         }
-         inline static QRectF toVariant(VALUE value) {
--            if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 4 ) {
-+            if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 4 ) {
-                 rb_raise(rb_eTypeError, "QRectF must be an array with 4 elements");
-                 return QRectF();
-             }
-@@ -447,7 +447,7 @@
-                 return QStringList();
-             }
-             QStringList l;
--            for(int i = 0; i < RARRAY(value)->len; i++)
-+            for(int i = 0; i < RARRAY_LEN(value); i++)
-                 l.append( RubyType<QString>::toVariant( rb_ary_entry(value, i) ) );
-             return l;
-         }
-@@ -469,7 +469,7 @@
-                 return QVariantList();
-             }
-             QVariantList l;
--            for(int i = 0; i < RARRAY(value)->len; i++)
-+            for(int i = 0; i < RARRAY_LEN(value); i++)
-                 l.append( RubyType<QVariant>::toVariant( rb_ary_entry(value, i) ) );
-             return l;
-         }
diff --git a/source/kde/kdebindings/kdebindings-ruby-env.h.diff b/source/kde/kdebindings/kdebindings-ruby-env.h.diff
deleted file mode 100644
index 61f404c7..00000000
--- a/source/kde/kdebindings/kdebindings-ruby-env.h.diff
+++ /dev/null
@@ -1,139 +0,0 @@
---- kdebindings-r1016551/ruby/krossruby/rubyextension.cpp.org	2009-08-26 07:50:12.000000000 -0600
-+++ kdebindings-r1016551/ruby/krossruby/rubyextension.cpp	2009-08-29 05:59:57.705834017 -0600
-@@ -278,7 +278,7 @@
-             sendersignal = RubyType<QByteArray>::toVariant(argv[1]);
-             idx = 2;
-             if( argc <= idx ) {
--                rb_raise(rb_eTypeError, ::QString("Expected at least %1 arguments.").arg(idx+1).toLatin1().constData());
-+                /*rb_raise(rb_eTypeError, ::QString("Expected at least %1 arguments.").arg(idx+1).toLatin1().constData());*/
-                 return Qfalse;
-             }
-         } break;
-@@ -310,7 +310,7 @@
-         */
- #if(!(RUBY_VERSION_MAJOR==1 && RUBY_VERSION_MINOR==8 && RUBY_VERSION_TEENY==4))
-         else {
--            rb_raise(rb_eTypeError, ::QString("The argument number %1 is invalid.").arg(idx).toLatin1().constData());
-+            /*rb_raise(rb_eTypeError, ::QString("The argument number %1 is invalid.").arg(idx).toLatin1().constData());*/
-             return Qfalse;
-         }
- #endif
---- kdebindings-r1016551/ruby/krossruby/rubyfunction.h.org	2009-08-26 07:50:12.000000000 -0600
-+++ kdebindings-r1016551/ruby/krossruby/rubyfunction.h	2009-08-29 06:27:56.393849016 -0600
-@@ -198,7 +198,7 @@
-                             //VALUE result = rb_funcall2(m_method, rb_intern("call"), argsize, args);
- 
-                             //TODO optimize
--                            ruby_in_eval++;
-+                            /*ruby_in_eval++;
-                             VALUE argarray = rb_ary_new2(3);
-                             rb_ary_store(argarray, 0, m_method); //self
-                             rb_ary_store(argarray, 1, INT2FIX(argsize));
-@@ -207,7 +207,7 @@
-                             ruby_in_eval--;
- 
-                             // finally set the returnvalue
--                            m_tmpResult = RubyType<QVariant>::toVariant(result);
-+                            m_tmpResult = RubyType<QVariant>::toVariant(result);*/
-                             #ifdef KROSS_RUBY_FUNCTION_DEBUG
-                                 QObject* sender = QObject::sender();
-                                 krossdebug( QString("RubyFunction::qt_metacall sender.objectName=%1 sender.className=%2 result=%3 variantresult=%4").arg(sender->objectName()).arg(sender->metaObject()->className()).arg(STR2CSTR(rb_inspect(result))).arg(m_tmpResult.toString()) );
---- kdebindings-r1016551/ruby/krossruby/rubyobject.cpp.org	2009-08-28 04:05:33.356632000 -0600
-+++ kdebindings-r1016551/ruby/krossruby/rubyobject.cpp	2009-08-29 05:22:50.886344151 -0600
-@@ -52,7 +52,7 @@
-         }
-     }
- 
--    ruby_nerrs++;
-+    /*ruby_nerrs++;*/
- /*
-     VALUE rubyscriptvalue = rb_funcall(self, rb_intern("const_get"), 1, ID2SYM(rb_intern("RUBYSCRIPTOBJ")));
-     RubyScript* rubyscript;
---- kdebindings-r1016551/ruby/krossruby/rubyscript.cpp.org	2009-08-28 04:05:33.360633000 -0600
-+++ kdebindings-r1016551/ruby/krossruby/rubyscript.cpp	2009-08-29 05:21:52.226333617 -0600
-@@ -65,7 +65,7 @@
-         }
-     }
- 
--    ruby_nerrs++;
-+/*    ruby_nerrs++;*/
- 
-     VALUE rubyscriptvalue = rb_funcall(self, rb_intern("const_get"), 1, ID2SYM(rb_intern("RUBYSCRIPTOBJ")));
-     RubyScript* rubyscript;
-@@ -173,11 +173,11 @@
-             // needed to prevent infinitive loops ifour scripting call uses e.g. callFunction
-             m_hasBeenSuccessFullyExecuted = true;
- 
--            const int critical = rb_thread_critical;
--            rb_thread_critical = Qtrue;
-+            /*const int critical = rb_thread_critical;*/
-+            /*rb_thread_critical = Qtrue;
- 
-             ruby_nerrs = 0;
--            ruby_errinfo = Qnil;
-+            ruby_errinfo = Qnil;*/
- 
-             VALUE args = rb_ary_new2(3);
-             rb_ary_store(args, 0, m_script); //self
-@@ -192,24 +192,24 @@
-             }
-             */
- 
--            ruby_in_eval++;
-+            /*ruby_in_eval++;*/
-             VALUE result = rb_rescue2((VALUE(*)(...))callExecute, args, (VALUE(*)(...))callExecuteException, m_script, rb_eException, 0);
--            ruby_in_eval--;
-+            /*ruby_in_eval--;*/
- 
--            if (ruby_nerrs != 0) {
-+            /*if (ruby_nerrs != 0) {
-                 //#ifdef KROSS_RUBY_SCRIPT_EXECUTE_DEBUG
-                     krossdebug( QString("Compilation has failed. errorMessage=%1 errorTrace=\n%2\n").arg(q->errorMessage()).arg(q->errorTrace()) );
-                 //#endif
-                 m_hasBeenSuccessFullyExecuted = false;
-             } else {
-                 m_hasBeenSuccessFullyExecuted = true;
--            }
-+            }*/
- 
-             #ifdef KROSS_RUBY_EXPLICIT_GC
-                 rb_gc();
-             #endif
- 
--            rb_thread_critical = critical;
-+            /*rb_thread_critical = critical;*/
-             return result;
-         }
- 
-@@ -371,9 +371,9 @@
-         krossdebug( QString("RubyScript::callFunction() name=%1").arg(name) );
-     #endif
- 
--    const int critical = rb_thread_critical;
-+    /*const int critical = rb_thread_critical;
-     rb_thread_critical = Qtrue;
--    ruby_in_eval++;
-+    ruby_in_eval++;*/
-     //ruby_current_node
- 
-     if( ! d->m_hasBeenSuccessFullyExecuted ) {
-@@ -383,7 +383,7 @@
-         #ifdef KROSS_RUBY_SCRIPT_CALLFUNCTION_DEBUG
-             krossdebug("RubyScript::callFunction failed");
-         #endif
--        setError( QString("Failed to call function \"%1\": %2").arg(name).arg(STR2CSTR( rb_obj_as_string(ruby_errinfo) )) ); // TODO: get the error
-+        /*setError( QString("Failed to call function \"%1\": %2").arg(name).arg(STR2CSTR( rb_obj_as_string(ruby_errinfo) )) ); // TODO: get the error*/
-     }
-     else {
-         //VALUE self = rb_eval_string("self");
-@@ -413,8 +413,8 @@
- //         rb_gc(); // This one is plainly wrong, since there is a good deal of chance that it will delete the content of result before it is used
-     #endif
- 
--    ruby_in_eval--;
--    rb_thread_critical = critical;
-+    /*ruby_in_eval--;
-+    rb_thread_critical = critical;*/
- 
-     return result;
- }
diff --git a/source/kde/kdebindings/kdebindings-rubyconfig.h.diff b/source/kde/kdebindings/kdebindings-rubyconfig.h.diff
deleted file mode 100644
index aa8b426d..00000000
--- a/source/kde/kdebindings/kdebindings-rubyconfig.h.diff
+++ /dev/null
@@ -1,20 +0,0 @@
---- kdebindings-4.3.0/ruby/krossruby/rubyconfig.h.org	2009-01-16 08:04:29.000000000 -0700
-+++ kdebindings-4.3.0/ruby/krossruby/rubyconfig.h	2009-08-08 23:14:59.917148261 -0600
-@@ -21,12 +21,12 @@
- #define KROSS_RUBY_CONFIG_H
- 
- #include <ruby.h>
--#include <env.h>
--#include <rubysig.h>
--#include <node.h>
--#include <version.h>
-+//#include <env.h>
-+#include <ruby/backward/rubysig.h>
-+#include <ruby/node.h>
-+#include <ruby/version.h>
- 
--#include <st.h>
-+#include <ruby/st.h>
- //#include <typeinfo>
- 
- #include <kross/core/krossconfig.h>
diff --git a/source/kde/kdebindings/kdebindings.1170602.sip_4_11_x.diff b/source/kde/kdebindings/kdebindings.1170602.sip_4_11_x.diff
deleted file mode 100644
index b925f97c..00000000
--- a/source/kde/kdebindings/kdebindings.1170602.sip_4_11_x.diff
+++ /dev/null
@@ -1,66 +0,0 @@
-Index: python/pykde4/sip/kdecore/typedefs.sip
-===================================================================
---- python/pykde4/sip/kdecore/typedefs.sip	(revision 1170601)
-+++ python/pykde4/sip/kdecore/typedefs.sip	(revision 1170602)
-@@ -733,61 +733,6 @@
- };
- 
- 
--%MappedType QList<uint>
--{
--%TypeHeaderCode
--#include <qlist.h>
--%End
--
--%ConvertFromTypeCode
--    // Create the list.
--    PyObject *l;
--
--    if ((l = PyList_New(sipCpp->size())) == NULL)
--        return NULL;
--
--    // Set the list elements.
--    for (int i = 0; i < sipCpp->size(); ++i) {
--        PyObject *pobj;
--
--#if PY_MAJOR_VERSION >= 3
--        if ((pobj = PyLong_FromLong(sipCpp->value(i))) == NULL) {
--#else
--        if ((pobj = PyInt_FromLong(sipCpp->value(i))) == NULL) {
--#endif
--            Py_DECREF(l);
--
--            return NULL;
--        }
--
--        PyList_SET_ITEM(l, i, pobj);
--    }
--
--    return l;
--%End
--
--%ConvertToTypeCode
--    // Check the type if that is all that is required.
--    if (sipIsErr == NULL)
--        return PyList_Check(sipPy);
--
--    QList<uint> *ql = new QList<uint>;
-- 
--    for (int i = 0; i < PyList_GET_SIZE(sipPy); ++i) {
--#if PY_MAJOR_VERSION >= 3
--        ql->append(PyLong_AsLong(PyList_GET_ITEM(sipPy, i)));
--#else
--        ql->append(PyInt_AsLong(PyList_GET_ITEM(sipPy, i)));
--#endif        
--    }
--    
--    *sipCppPtr = ql;
-- 
--    return sipGetState(sipTransferObj);
--%End
--};
--
--
- template <TYPE*>
- %MappedType QStack<TYPE*>
- {
diff --git a/source/kde/kdebindings/kdebindings.SlackBuild b/source/kde/kdebindings/kdebindings.SlackBuild
deleted file mode 100755
index c07ab1ab..00000000
--- a/source/kde/kdebindings/kdebindings.SlackBuild
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdebindings
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdebindings-$VERSION..."
-tar xvf $CWD/../src/kdebindings-$VERSION.tar.?z* || exit 1
-cd kdebindings-$VERSION
-
-zcat $CWD/kdebindings-len-ptr-rfloat.diff.gz | patch -p1 --verbose || exit 1
-zcat $CWD/kdebindings-ruby-env.h.diff.gz | patch -p1 --verbose || exit 1
-zcat $CWD/kdebindings-rubyconfig.h.diff.gz | patch -p1 --verbose || exit 1
-zcat $CWD/kdebindings.1170602.sip_4_11_x.diff.gz | patch -p0 --verbose || exit 1
-( cd python/pykde4/tools/pykdeuic4 ; zcat $CWD/pykdeuic4.patch.gz | patch -p0 --verbose || exit 1 ) || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Set 'vendorarch' (install location for vendor shipped
-# architecture dependent perl modules):
-eval $(perl '-V:vendorarch')
-
-#    -DENABLE_PYKDE4:BOOL=OFF \
-mkdir -p build
-cd build
-    #-DCMAKE_BACKWARDS_COMPATIBILITY:STRING="2.2" \
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DCUSTOM_PERL_SITE_ARCH_DIR=$vendorarch \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DENABLE_QYOTO:BOOL=OFF \
-    -DENABLE_QSCINTILLA_SHARP:BOOL=OFF \
-    -DENABLE_KIMONO:BOOL=OFF \
-    -DBUILD_csharp:BOOL=OFF \
-    ..
-   # kdebindings has (in the past, on several occasions) barfed on multijobs,
-   # so no $NUMJOBS here. We run make twice because the first time is not
-   # 100% successful either...:
-   make || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdebindings-$VERSION
-cp -a AUTHORS COPYING* INSTALL NEWS README \
-  $PKG/usr/doc/kdebindings-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdebindings-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdebindings/local.options b/source/kde/kdebindings/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdebindings/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdebindings/pykdeuic4.patch b/source/kde/kdebindings/pykdeuic4.patch
deleted file mode 100644
index 7cd77946..00000000
--- a/source/kde/kdebindings/pykdeuic4.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: pykdeuic4.py
-===================================================================
---- pykdeuic4.py	(revisione 1209658)
-+++ pykdeuic4.py	(copia locale)
-@@ -39,7 +39,7 @@
-     def __init__(self,string):
-         original_i18n_string.__init__(self,string)
-     def __str__(self):
--        return "kdecore.i18n(\"%s\")" % (qtproxies.escape(self.string),)
-+        return "kdecore.i18n(\"%s\")" % (qtproxies.as_string(self.string),)
- qtproxies.i18n_string = kde_i18n_string
- 
- def kdeFilter():
-@@ -71,7 +71,7 @@
-     indenter.indentwidth = indent
-     comp = compiler.UICompiler()
-     comp.factory._cwFilters.append(kdeFilter())
--    winfo = comp.compileUi(uifile, output)
-+    winfo = comp.compileUi(uifile, output, "")
- 
-     if exe:
-         output.write("""
diff --git a/source/kde/kdeedu/kdeedu.SlackBuild b/source/kde/kdeedu/kdeedu.SlackBuild
deleted file mode 100755
index 1cdb0336..00000000
--- a/source/kde/kdeedu/kdeedu.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeedu
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeedu-$VERSION..."
-tar xvf $CWD/../src/kdeedu-$VERSION.tar.?z* || exit 1
-cd kdeedu-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeedu-$VERSION
-cp -a COPYING* INSTALL README $PKG/usr/doc/kdeedu-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeedu-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdegames/kdegames.SlackBuild b/source/kde/kdegames/kdegames.SlackBuild
deleted file mode 100755
index 6532e1e7..00000000
--- a/source/kde/kdegames/kdegames.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdegames
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdegames-$VERSION..."
-tar xvf $CWD/../src/kdegames-$VERSION.tar.?z* || exit 1
-cd kdegames-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdegames-$VERSION
-cp -a AUTHORS COPYING* INSTALL README $PKG/usr/doc/kdegames-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdegames-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdegraphics/kdegraphics.SlackBuild b/source/kde/kdegraphics/kdegraphics.SlackBuild
deleted file mode 100755
index dd957444..00000000
--- a/source/kde/kdegraphics/kdegraphics.SlackBuild
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdegraphics
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdegraphics-$VERSION..."
-tar xvf $CWD/../src/kdegraphics-$VERSION.tar.?z* || exit 1
-cd kdegraphics-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdegraphics-$VERSION
-cp -a AUTHORS COPYING* INSTALL README \
-  $PKG/usr/doc/kdegraphics-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdegraphics-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdegraphics/local.options b/source/kde/kdegraphics/local.options
deleted file mode 100644
index a837340d..00000000
--- a/source/kde/kdegraphics/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=3
diff --git a/source/kde/kdelibs/kdelibs.SlackBuild b/source/kde/kdelibs/kdelibs.SlackBuild
deleted file mode 100755
index 94e67287..00000000
--- a/source/kde/kdelibs/kdelibs.SlackBuild
+++ /dev/null
@@ -1,102 +0,0 @@
-#!/bin/sh 
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdelibs
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdelibs-$VERSION..."
-tar xvf $CWD/../src/kdelibs-$VERSION.tar.?z* || exit 1
-cd kdelibs-$VERSION
-
-# Slackware ships a different version of XML DTDs:
-zcat $CWD/kdelibs.docbook.patch.gz | patch -p1 --verbose || exit 1
-
-# Security fix:
-zcat $CWD/kdelibs.khtml.CVE-2011-1168.diff.gz | patch -p1 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DKDE_DISTRIBUTION_TEXT="volkerdi@slackware.com" \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-# Move the polkit dbus configuration files to the proper place:
-mv $PKG/etc/kde/dbus-1 $PKG/etc/
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdelibs-$VERSION
-cp -a AUTHORS COPYING* DEBUG INSTALL README TODO \
-  $PKG/usr/doc/kdelibs-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdelibs-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdelibs/kdelibs.khtml.CVE-2011-1168.diff b/source/kde/kdelibs/kdelibs.khtml.CVE-2011-1168.diff
deleted file mode 100644
index 356f30a6..00000000
--- a/source/kde/kdelibs/kdelibs.khtml.CVE-2011-1168.diff
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/khtml/khtml_part.cpp
-+++ b/khtml/khtml_part.cpp
-@@ -1803,7 +1803,10 @@ void KHTMLPart::htmlError( int errorCode
-   stream >> errorName >> techName >> description >> causes >> solutions;
- 
-   QString url, protocol, datetime;
--  url = Qt::escape( reqUrl.prettyUrl() );
-+
-+  // This is somewhat confusing, but we have to escape the externally-
-+  // controlled URL twice: once for i18n, and once for HTML.
-+  url = Qt::escape( Qt::escape( reqUrl.prettyUrl() ) );
-   protocol = reqUrl.protocol();
-   datetime = KGlobal::locale()->formatDateTime( QDateTime::currentDateTime(),
-                                                 KLocale::LongDate );
diff --git a/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch b/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch
deleted file mode 100644
index 64b4d5af..00000000
--- a/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-diff -Naur kdesu/stub.cpp kdesu.new/stub.cpp
---- kdesu/stub.cpp	2008-05-21 08:08:55.000000000 -0300
-+++ kdesu.new/stub.cpp	2009-10-13 01:32:10.000000000 -0300
-@@ -105,6 +105,7 @@
- int StubProcess::ConverseStub(int check)
- {
-     QByteArray line, tmp;
-+
-     while (1)
-     {
- 	line = readLine();
-@@ -117,7 +118,17 @@
- 	    enableLocalEcho(false);
- 	    if (check) writeLine("stop");
- 	    else writeLine("ok");
--	} else if (line == "display") {
-+	    break;
-+	} 
-+    }
-+
-+    while (1)
-+    {
-+	line = readLine();
-+	if (line.isNull())
-+	    return -1;
-+
-+        if (line == "display") {
- 	    writeLine(display());
- 	} else if (line == "display_auth") {
- #ifdef Q_WS_X11
-diff -Naur kdesu/su.cpp kdesu.new/su.cpp
---- kdesu/su.cpp	2008-05-21 08:08:55.000000000 -0300
-+++ kdesu.new/su.cpp	2009-10-19 00:21:31.000000000 -0200
-@@ -258,13 +258,6 @@
-             //////////////////////////////////////////////////////////////////////////
-             case WaitForPrompt:
-             {
--                // In case no password is needed.
--                if (line == "kdesu_stub")
--                {
--                    unreadLine(line);
--                    return ok;
--                }
--
-                 while(waitMS(fd(),100)>0)
-                 {
-                     // There is more output available, so the previous line
-@@ -279,6 +272,13 @@
-                     kDebug(900) << k_lineinfo << "Read line <" << more << ">";
-                 }
- 
-+                // In case no password is needed.
-+                if (line == "kdesu_stub")
-+                {
-+                    unreadLine(line);
-+                    return ok;
-+                }
-+
-                 // Match "Password: " with the regex ^[^:]+:[\w]*$.
-                 const uint len = line.length();
-                 for (i=0,j=0,colon=0; i<len; i++)
diff --git a/source/kde/kdelibs/local.options b/source/kde/kdelibs/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdelibs/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdemultimedia/kdemultimedia.SlackBuild b/source/kde/kdemultimedia/kdemultimedia.SlackBuild
deleted file mode 100755
index 9a7826ad..00000000
--- a/source/kde/kdemultimedia/kdemultimedia.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdemultimedia
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdemultimedia-$VERSION..."
-tar xvf $CWD/../src/kdemultimedia-$VERSION.tar.?z* || exit 1
-cd kdemultimedia-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdemultimedia-$VERSION
-cp -a AUTHORS COPYING* INSTALL README $PKG/usr/doc/kdemultimedia-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdemultimedia-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdemultimedia/slack-desc b/source/kde/kdemultimedia/slack-desc
deleted file mode 100644
index 2cc67153..00000000
--- a/source/kde/kdemultimedia/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------------|
-kdemultimedia: kdemultimedia (KDE multimedia applications)
-kdemultimedia:
-kdemultimedia: Multimedia applications for the KDE Software Compilation, including:
-kdemultimedia:  * noatun: a multimedia player for sound and movies
-kdemultimedia:  * kmix: the audio mixer as a standalone program and Kicker applet
-kdemultimedia:  * kscd: A CD player with an interface to the internet CDDB database
-kdemultimedia:  * phonon-xine: A Phonon backend based on Xine
-kdemultimedia:
-kdemultimedia:
-kdemultimedia:
-kdemultimedia:
diff --git a/source/kde/kdenetwork/kdenetwork.SlackBuild b/source/kde/kdenetwork/kdenetwork.SlackBuild
deleted file mode 100755
index 8f93627d..00000000
--- a/source/kde/kdenetwork/kdenetwork.SlackBuild
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdenetwork
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdenetwork-$VERSION..."
-tar xvf $CWD/../src/kdenetwork-$VERSION.tar.?z* || exit 1
-cd kdenetwork-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DWITH_irc=ON \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdenetwork-$VERSION
-cp -a COPYING* INSTALL README $PKG/usr/doc/kdenetwork-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdenetwork-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild b/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild
deleted file mode 100755
index 51b89c51..00000000
--- a/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=kdepim-runtime
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building $PRGNAM-$VERSION..."
-tar xvf $CWD/../src/$PRGNAM-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING* MAINTAINERS README* $PKG/usr/doc/$PRGNAM-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdepim-runtime/local.options b/source/kde/kdepim-runtime/local.options
deleted file mode 100644
index bab1fcbd..00000000
--- a/source/kde/kdepim-runtime/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=4.4.10
diff --git a/source/kde/kdepim/kdepim-4.4.0-install-headers.patch b/source/kde/kdepim/kdepim-4.4.0-install-headers.patch
deleted file mode 100644
index 37814709..00000000
--- a/source/kde/kdepim/kdepim-4.4.0-install-headers.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-Index: libkleo/CMakeLists.txt
-===================================================================
---- libkleo/CMakeLists.txt	(revision 1072331)
-+++ libkleo/CMakeLists.txt	(revision 1072330)
-@@ -117,4 +117,60 @@
- set_target_properties(kleo PROPERTIES VERSION ${GENERIC_LIB_VERSION} SOVERSION ${GENERIC_LIB_SOVERSION} )
- install(TARGETS kleo ${INSTALL_TARGETS_DEFAULT_ARGS})
- 
-+install( FILES
-+    kleo/cryptplug.h
-+    kleo/cryptplugfactory.h
-+    kleo/cryptplugwrapper.h
-+    kleo/cryptplugwrapperlist.h
-+    kleo/kleo_export.h
-+    kleo/enum.h
-+    kleo/oidmap.h
-+    kleo/cryptobackend.h
-+    kleo/cryptobackendfactory.h
-+    kleo/cryptoconfig.h
-+    kleo/dn.h
-+    kleo/job.h
-+    kleo/keylistjob.h
-+    kleo/keygenerationjob.h
-+    kleo/abstractimportjob.h
-+    kleo/importjob.h
-+    kleo/importfromkeyserverjob.h
-+    kleo/exportjob.h
-+    kleo/changeexpiryjob.h
-+    kleo/changeownertrustjob.h
-+    kleo/downloadjob.h
-+    kleo/deletejob.h
-+    kleo/encryptjob.h
-+    kleo/decryptjob.h
-+    kleo/signjob.h
-+    kleo/specialjob.h
-+    kleo/verifydetachedjob.h
-+    kleo/verifyopaquejob.h
-+    kleo/decryptverifyjob.h
-+    kleo/signencryptjob.h
-+    kleo/signkeyjob.h
-+    kleo/adduseridjob.h
-+    kleo/refreshkeysjob.h
-+    kleo/multideletejob.h
-+    kleo/hierarchicalkeylistjob.h
-+    kleo/keyfilter.h
-+    kleo/keyfiltermanager.h
-+    DESTINATION ${INCLUDE_INSTALL_DIR}/kleo COMPONENT Devel)
-+
-+install ( FILES
-+    ui/kdhorizontalline.h
-+    ui/messagebox.h
-+    ui/progressbar.h
-+    ui/progressdialog.h
-+    ui/keylistview.h
-+    ui/keyselectiondialog.h
-+    ui/keyrequester.h
-+    ui/keyapprovaldialog.h
-+    ui/backendconfigwidget.h
-+    ui/dnattributeorderconfigwidget.h
-+    ui/cryptoconfigmodule.h
-+    ui/cryptoconfigdialog.h
-+    ui/directoryserviceswidget.h
-+    DESTINATION ${INCLUDE_INSTALL_DIR}/kleo/ui COMPONENT Devel)
-+
- install ( FILES libkleopatrarc.desktop DESTINATION ${CONFIG_INSTALL_DIR} RENAME libkleopatrarc )
-Index: kleopatra/libkleopatraclient/gui/CMakeLists.txt
-===================================================================
---- kleopatra/libkleopatraclient/gui/CMakeLists.txt	(revision 1072331)
-+++ kleopatra/libkleopatraclient/gui/CMakeLists.txt	(revision 1072330)
-@@ -19,4 +19,11 @@
-   TARGETS kleopatraclientgui
-   DESTINATION ${LIB_INSTALL_DIR}
-   )
-+  
- 
-+install(
-+  FILES
-+    certificaterequester.h
-+  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/gui
-+  )
-+
-Index: kleopatra/libkleopatraclient/core/CMakeLists.txt
-===================================================================
---- kleopatra/libkleopatraclient/core/CMakeLists.txt	(revision 1072331)
-+++ kleopatra/libkleopatraclient/core/CMakeLists.txt	(revision 1072330)
-@@ -38,3 +38,12 @@
-   )
-   
- 
-+install(
-+  FILES
-+    initialization.h
-+    command.h
-+    selectcertificatecommand.h
-+    signencryptfilescommand.h
-+  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/core
-+  )
-+
-Index: kleopatra/libkleopatraclient/CMakeLists.txt
-===================================================================
---- kleopatra/libkleopatraclient/CMakeLists.txt	(revision 1072331)
-+++ kleopatra/libkleopatraclient/CMakeLists.txt	(revision 1072330)
-@@ -6,3 +6,7 @@
- 
- add_subdirectory( tests )
- 
-+install(
-+  FILES kleopatraclient_export.h
-+  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient
-+  )
-Index: libkpgp/CMakeLists.txt
-===================================================================
---- libkpgp/CMakeLists.txt	(revision 1072331)
-+++ libkpgp/CMakeLists.txt	(revision 1072330)
-@@ -34,3 +34,12 @@
- install(FILES kpgp.upd  DESTINATION ${KCONF_UPDATE_INSTALL_DIR})
- install(PROGRAMS kpgp-3.1-upgrade-address-data.pl DESTINATION ${KCONF_UPDATE_INSTALL_DIR})
- 
-+install(FILES
-+        kpgp.h
-+        kpgpbase.h
-+        kpgpblock.h
-+        kpgpkey.h
-+        kpgpui.h
-+        libkpgp_export.h
-+        DESTINATION ${INCLUDE_INSTALL_DIR}/kpgp COMPONENT Devel )
-+
diff --git a/source/kde/kdepim/kdepim.SlackBuild b/source/kde/kdepim/kdepim.SlackBuild
deleted file mode 100755
index 5c7b5347..00000000
--- a/source/kde/kdepim/kdepim.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdepim
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdepim-$VERSION..."
-tar xvf $CWD/../src/kdepim-$VERSION.tar.?z* || exit 1
-cd kdepim-$VERSION
-
-# Install the kleopatra headers, or else kopete-cryptography will not build:
-cat $CWD/kdepim-4.4.0-install-headers.patch | patch -p0 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdepim-$VERSION
-cp -a COPYING* MAINTAINERS README* $PKG/usr/doc/kdepim-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdepim-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdepim/local.options b/source/kde/kdepim/local.options
deleted file mode 100644
index bab1fcbd..00000000
--- a/source/kde/kdepim/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=4.4.10
diff --git a/source/kde/kdepimlibs/kdepimlibs-4.5.imap4.cpp.r1216162.diff b/source/kde/kdepimlibs/kdepimlibs-4.5.imap4.cpp.r1216162.diff
deleted file mode 100644
index 85a216dd..00000000
--- a/source/kde/kdepimlibs/kdepimlibs-4.5.imap4.cpp.r1216162.diff
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: branches/KDE/4.5/kdepimlibs/kioslave/imap4/imap4.cpp
-===================================================================
---- branches/KDE/4.5/kdepimlibs/kioslave/imap4/imap4.cpp	(revision 1216161)
-+++ branches/KDE/4.5/kdepimlibs/kioslave/imap4/imap4.cpp	(revision 1216162)
-@@ -2577,7 +2577,7 @@
-     ssize_t copyLen = (len < readBufferLen) ? len : readBufferLen;
-     memcpy(data, readBuffer, copyLen);
-     readBufferLen -= copyLen;
--    if (readBufferLen) memcpy(readBuffer, &readBuffer[copyLen], readBufferLen);
-+    if (readBufferLen) memmove(readBuffer, &readBuffer[copyLen], readBufferLen);
-     return copyLen;
-   }
-   if (!isConnected()) return 0;
diff --git a/source/kde/kdepimlibs/kdepimlibs.SlackBuild b/source/kde/kdepimlibs/kdepimlibs.SlackBuild
deleted file mode 100755
index 1cd30a67..00000000
--- a/source/kde/kdepimlibs/kdepimlibs.SlackBuild
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdepimlibs
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdepimlibs-$VERSION..."
-tar xvf $CWD/../src/kdepimlibs-$VERSION.tar.?z* || exit 1
-cd kdepimlibs-$VERSION
-
-zcat $CWD/kdepimlibs-4.5.imap4.cpp.r1216162.diff.gz | patch -p4 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdepimlibs-$VERSION
-cp -a COPYING* DEBUG HACKING MAINTAINERS PLAN POLICIES README* \
-  $PKG/usr/doc/kdepimlibs-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdepimlibs-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdepimlibs/local.options b/source/kde/kdepimlibs/local.options
deleted file mode 100644
index aae3c765..00000000
--- a/source/kde/kdepimlibs/local.options
+++ /dev/null
@@ -1 +0,0 @@
-BUILD=2
diff --git a/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild b/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild
deleted file mode 100755
index 5595221a..00000000
--- a/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeplasma-addons
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeplasma-addons-$VERSION..."
-tar xvf $CWD/../src/kdeplasma-addons-$VERSION.tar.?z* || exit 1
-cd kdeplasma-addons-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeplasma-addons-$VERSION
-cp -a COPYING* $PKG/usr/doc/kdeplasma-addons-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeplasma-addons-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdesdk/kdesdk.SlackBuild b/source/kde/kdesdk/kdesdk.SlackBuild
deleted file mode 100755
index 5c6f5730..00000000
--- a/source/kde/kdesdk/kdesdk.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdesdk
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdesdk-$VERSION..."
-tar xvf $CWD/../src/kdesdk-$VERSION.tar.?z* || exit 1
-cd kdesdk-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdesdk-$VERSION
-cp -a COPYING* README $PKG/usr/doc/kdesdk-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdesdk-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdetoys/kdetoys.SlackBuild b/source/kde/kdetoys/kdetoys.SlackBuild
deleted file mode 100755
index dbfe023f..00000000
--- a/source/kde/kdetoys/kdetoys.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdetoys
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdetoys-$VERSION..."
-tar xvf $CWD/../src/kdetoys-$VERSION.tar.?z* || exit 1
-cd kdetoys-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdetoys-$VERSION
-cp -a AUTHORS COPYING* README $PKG/usr/doc/kdetoys-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdetoys-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdeutils/kdeutils.SlackBuild b/source/kde/kdeutils/kdeutils.SlackBuild
deleted file mode 100755
index 66b54329..00000000
--- a/source/kde/kdeutils/kdeutils.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdeutils
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdeutils-$VERSION..."
-tar xvf $CWD/../src/kdeutils-$VERSION.tar.?z* || exit 1
-cd kdeutils-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdeutils-$VERSION
-cp -a AUTHORS COPYING* INSTALL README $PKG/usr/doc/kdeutils-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdeutils-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdeutils/slack-desc b/source/kde/kdeutils/slack-desc
deleted file mode 100644
index 2972d01f..00000000
--- a/source/kde/kdeutils/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler---------------------------------------------------|
-kdeutils: kdeutils (KDE Utilities)
-kdeutils:
-kdeutils: This package includes utilities for the KDE Software Compilation
-kdeutils: such as ark, kcalc, kcharselect, kdessh, kdf, kfloppy, kgpg,
-kdeutils: ktimer, kwalletmanager, kwikdisk, okteta, superkaramba, and
-kdeutils: sweeper.
-kdeutils:
-kdeutils:
-kdeutils:
-kdeutils:
-kdeutils:
diff --git a/source/kde/kdevelop/kdevelop.SlackBuild b/source/kde/kdevelop/kdevelop.SlackBuild
deleted file mode 100755
index 430f480b..00000000
--- a/source/kde/kdevelop/kdevelop.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdevelop
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdevelop-$VERSION..."
-tar xvf $CWD/../src/kdevelop-$VERSION.tar.?z* || exit 1
-cd kdevelop-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdevelop-$VERSION
-cp -a \
-  AUTHORS COPYING* ChangeLog HACKING* NEWS README* TODO \
-  $PKG/usr/doc/kdevelop-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdevelop-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdevelop/local.options b/source/kde/kdevelop/local.options
deleted file mode 100644
index 1e0de715..00000000
--- a/source/kde/kdevelop/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=4.2.2
diff --git a/source/kde/kdevplatform/kdevplatform.SlackBuild b/source/kde/kdevplatform/kdevplatform.SlackBuild
deleted file mode 100755
index d24b94db..00000000
--- a/source/kde/kdevplatform/kdevplatform.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdevplatform
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building kdevplatform-$VERSION..."
-tar xvf $CWD/../src/kdevplatform-$VERSION.tar.?z* || exit 1
-cd kdevplatform-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdevplatform-$VERSION
-cp -a \
-  COPYING* ChangeLog NEWS README TODO \
-  $PKG/usr/doc/kdevplatform-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdevplatform-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kdevplatform/local.options b/source/kde/kdevplatform/local.options
deleted file mode 100644
index a9a3ac1c..00000000
--- a/source/kde/kdevplatform/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=1.2.2
diff --git a/source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff b/source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff
deleted file mode 100644
index b3789bdd..00000000
--- a/source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff
+++ /dev/null
@@ -1,24 +0,0 @@
---- cmake/modules/FindLibTidy.cmake.old	2008-07-25 21:47:38.156473750 +0200
-+++ cmake/modules/FindLibTidy.cmake	2008-07-25 21:47:50.709258250 +0200
-@@ -17,7 +17,7 @@
-   set(LibTidy_FIND_QUIETLY TRUE)
- endif (LIBTIDY_INCLUDE_DIR)
- 
--FIND_PATH(LIBTIDY_INCLUDE_DIR tidy.h)
-+FIND_PATH(LIBTIDY_INCLUDE_DIR tidy/tidy.h tidy.h)
- 
- 
- FIND_LIBRARY(LIBTIDY_LIBRARIES NAMES tidy)
---- klinkstatus/src/tidy/tidyx.h.old	2008-07-25 21:48:23.151285750 +0200
-+++ klinkstatus/src/tidy/tidyx.h	2008-07-25 21:48:36.464117750 +0200
-@@ -48,8 +48,8 @@
-   Created 2002-07-11 by Charles Reitzel
- */
- 
--#include <tidy.h>
--#include <buffio.h>
-+#include <tidy/tidy.h>
-+#include <tidy/buffio.h>
- 
- #include <config-tidy.h>
-     
diff --git a/source/kde/kdewebdev/kdewebdev.SlackBuild b/source/kde/kdewebdev/kdewebdev.SlackBuild
deleted file mode 100755
index 47e48499..00000000
--- a/source/kde/kdewebdev/kdewebdev.SlackBuild
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-kdewebdev
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-
-# First, build and install Tidy:
-cd tidy 
-  echo "Building htmltidy..."
-  ARCH=$ARCH sh ./tidy.build $PKG
-cd -
-
-cd $TMP
-echo "Building kdewebdev-$VERSION..."
-tar xvf $CWD/../src/kdewebdev-$VERSION.tar.?z* || exit 1
-cd kdewebdev-$VERSION
-
-#zcat $CWD/kde4-kdewebdev-findtidy.diff.gz | patch -p0 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Maybe we won't need this again...
-#    -DWITH_RUBY:BOOL=OFF \
-cp klinkstatus/src/tidy/tidyx.h{,.orig}
-zcat $CWD/include-tidy.patch.gz | patch -p0
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DLIBTIDY_INCLUDE_DIR=$PKG/usr/include \
-    -DLIBTIDY_LIBRARIES=$PKG/usr/lib${LIBDIRSUFFIX}/libtidy.so \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/kdewebdev-$VERSION
-cp -a AUTHORS COPYING* INSTALL* NEWS PACKAGING README TODO VERSION \
-  $PKG/usr/doc/kdewebdev-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kdewebdev-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/koffice/koffice.SlackBuild b/source/kde/koffice/koffice.SlackBuild
deleted file mode 100755
index a87d36e7..00000000
--- a/source/kde/koffice/koffice.SlackBuild
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-koffice
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building koffice-$VERSION..."
-tar xvf $CWD/../src/koffice-$VERSION.tar.?z* || exit 1
-cd koffice-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-if [ ! -r $PKG/usr/bin/kformula ]; then # wtf??
-  echo "Kludging KFormula installation..."
-  cp -a build/kformula/kformula $PKG/usr/bin/kformula || exit 1
-  cp -a build/lib/kformulapart.so $PKG/usr/lib${LIBDIRSUFFIX}/kde4/kformulapart.so || exit 1
-  cp -a build/lib/libkdeinit_kformula.so $PKG/usr/lib${LIBDIRSUFFIX}/libkdeinit_kformula.so || exit 1
-  cp -a kformula/kformula.desktop $PKG/usr/share/applications/kde4/kformula.desktop || exit 1
-  mkdir -p $PKG/usr/share/apps/kformula || exit 1
-  cp -a kformula/kformula.rc $PKG/usr/share/apps/kformula/kformula.rc || exit 1
-  cp -a kformula/kformula_readonly.rc $PKG/usr/share/apps/kformula/kformula_readonly.rc || exit 1
-  cp -a kformula/tips $PKG/usr/share/apps/kformula/tips || exit 1
-  cp -a kformula/kformulapart.desktop $PKG/usr/share/kde4/services/kformulapart.desktop || exit 1
-fi
-
-mkdir -p $PKG/usr/doc/koffice-$VERSION
-cp -a AUTHORS COPYING* README* $PKG/usr/doc/koffice-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/koffice-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/koffice/local.options b/source/kde/koffice/local.options
deleted file mode 100644
index 504bb683..00000000
--- a/source/kde/koffice/local.options
+++ /dev/null
@@ -1,2 +0,0 @@
-VERSION=2.3.3
-BUILD=2
diff --git a/source/kde/konq-plugins/konq-plugins-4.4.0-qt47.patch b/source/kde/konq-plugins/konq-plugins-4.4.0-qt47.patch
deleted file mode 100644
index 02614605..00000000
--- a/source/kde/konq-plugins/konq-plugins-4.4.0-qt47.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -up konq-plugins-4.4.0/adblock/adblock.cpp.qt47 konq-plugins-4.4.0/adblock/adblock.cpp
---- konq-plugins-4.4.0/adblock/adblock.cpp.qt47	2010-09-07 15:51:03.776797042 -0500
-+++ konq-plugins-4.4.0/adblock/adblock.cpp	2010-09-07 15:51:47.901818132 -0500
-@@ -300,7 +300,7 @@ void AdBlock::updateFilters()
- // ----------------------------------------------------------------------------
- 
- AdElement::AdElement() :
--  m_url(0), m_category(0), m_type(0), m_blocked(false) {}
-+  m_blocked(false) {}
- 
- AdElement::AdElement(const QString &url, const QString &category,
- 		     const QString &type, bool blocked, const DOM::Node&node) :
diff --git a/source/kde/konq-plugins/konq-plugins.SlackBuild b/source/kde/konq-plugins/konq-plugins.SlackBuild
deleted file mode 100755
index 472f8b50..00000000
--- a/source/kde/konq-plugins/konq-plugins.SlackBuild
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-konq-plugins
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building konq-plugins-$VERSION..."
-tar xvf $CWD/../src/extragear/konq-plugins-$VERSION.tar.?z* || exit 1
-cd konq-plugins-$VERSION
-
-zcat $CWD/konq-plugins-4.4.0-qt47.patch.gz | patch -p1 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/konq-plugins-$VERSION
-cp -a konq-plugins/COPYING* konq-plugins/README* \
-  $PKG/usr/doc/konq-plugins-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/konq-plugins-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/konq-plugins/local.options b/source/kde/konq-plugins/local.options
deleted file mode 100644
index d0a81e8b..00000000
--- a/source/kde/konq-plugins/local.options
+++ /dev/null
@@ -1,2 +0,0 @@
-VERSION=4.4.0
-BUILD=2
diff --git a/source/kde/konq-plugins/slack-desc b/source/kde/konq-plugins/slack-desc
deleted file mode 100644
index e3199106..00000000
--- a/source/kde/konq-plugins/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-konq-plugins: konq-plugins (Plugins to extend Konqueror)
-konq-plugins:
-konq-plugins: This module contains plugins that interact with Konqueror.  Some of
-konq-plugins: the plugins included are babelfish, dirfilter, domtreeviewer,
-konq-plugins: htmlvalidator, cssvalidator, khtmlsettingsplugin, kimgalleryplugin,
-konq-plugins: uachanger, kuick, smbmounter, autorefresh, sidebar,
-konq-plugins: sidebar/mediaplayer, fsview, akregator, mediarealfolder,
-konq-plugins: and minitools.
-konq-plugins:
-konq-plugins:
-konq-plugins:
diff --git a/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild b/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild
deleted file mode 100755
index b75eb641..00000000
--- a/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PRGNAM=kopete-cryptography
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building $PRGNAM-$VERSION..."
-tar xvf $CWD/../src/extragear/$PRGNAM-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING* $PKG/usr/doc/$PRGNAM-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
-
diff --git a/source/kde/kopete-cryptography/local.options b/source/kde/kopete-cryptography/local.options
deleted file mode 100644
index fda42958..00000000
--- a/source/kde/kopete-cryptography/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=1.3.0-kde4.4.0
diff --git a/source/kde/ktorrent/ktorrent.SlackBuild b/source/kde/ktorrent/ktorrent.SlackBuild
deleted file mode 100755
index 57cf6ae1..00000000
--- a/source/kde/ktorrent/ktorrent.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-ktorrent
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building ktorrent-$VERSION..."
-tar xvf $CWD/../src/extragear/ktorrent-${VERSION}.tar.?z* || exit 1
-cd ktorrent-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/ktorrent-$VERSION
-cp -a COPYING* ChangeLog \
-  $PKG/usr/doc/ktorrent-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/ktorrent-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/ktorrent/local.options b/source/kde/ktorrent/local.options
deleted file mode 100644
index 8b19ba5f..00000000
--- a/source/kde/ktorrent/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=4.0.5
diff --git a/source/kde/ktorrent/slack-desc b/source/kde/ktorrent/slack-desc
deleted file mode 100644
index fbf151f7..00000000
--- a/source/kde/ktorrent/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-ktorrent: ktorrent (KDE BitTorrent program)
-ktorrent:
-ktorrent: KTorrent is a BitTorrent program with many features:
-ktorrent: Download torrent files (of course :-), upload and download speed
-ktorrent: capping, Internet searching, UDP trackers, port forwarding with UPnP,
-ktorrent: IP blocking, importing of partially or fully downloaded files,
-ktorrent: support for distributed hash tables, protocol encryption,
-ktorrent: bandwidth scheduling, and much more.
-ktorrent:
-ktorrent: KTorrent's developers are Joris Guisson and Ivan Vasic.
-ktorrent: KTorrent is released under the GPL.
diff --git a/source/kde/libktorrent/libktorrent.SlackBuild b/source/kde/libktorrent/libktorrent.SlackBuild
deleted file mode 100755
index 468039ae..00000000
--- a/source/kde/libktorrent/libktorrent.SlackBuild
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-libktorrent
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building libktorrent-$VERSION..."
-tar xvf $CWD/../src/extragear/libktorrent-${VERSION}.tar.?z* || exit 1
-cd libktorrent-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/libktorrent-$VERSION
-cp -a COPYING* ChangeLog \
-  $PKG/usr/doc/libktorrent-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/libktorrent-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
-
diff --git a/source/kde/libktorrent/local.options b/source/kde/libktorrent/local.options
deleted file mode 100644
index dd52e8e3..00000000
--- a/source/kde/libktorrent/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=1.0.5-3
diff --git a/source/kde/libktorrent/slack-desc b/source/kde/libktorrent/slack-desc
deleted file mode 100644
index e8334401..00000000
--- a/source/kde/libktorrent/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-libktorrent: libktorrent (Protocol library for the KDE BitTorrent program)
-libktorrent:
-libktorrent: Libktorrent is the BitTorrent protocol library for ktorrent, which
-libktorrent: contains all the torrent downloading code.  Although it is closely
-libktorrent: to ktorrent, the goal is to make libktorrent an independent library
-libktorrent: which can be used by other applications.
-libktorrent:
-libktorrent: Homepage:  http://ktorrent.org
-libktorrent:
-libktorrent:
-libktorrent:
diff --git a/source/kde/modularize b/source/kde/modularize
new file mode 100644
index 00000000..138552b0
--- /dev/null
+++ b/source/kde/modularize
@@ -0,0 +1,117 @@
+# If a package is listed here, it will be built apart from the
+# usual "grab bag" package that's made from each source directory.
+
+# kdeaccessibility
+jovie
+kaccessible
+kmag
+kmouth
+kmousetool
+
+# kdebase:
+kde-baseapps
+kactivities
+konsole
+kate
+kde-wallpapers
+kde-workspace
+kde-runtime
+kde-base-artwork
+
+# kdeedu:
+libkdeedu
+analitza
+blinken
+cantor
+kalgebra
+kalzium
+kanagram
+kbruch
+kgeography
+khangman
+kig
+kiten
+klettres
+kmplot
+kstars
+ktouch
+kturtle
+kwordquiz
+marble
+parley
+rocs
+step
+
+# kdegraphics:
+libkipi
+libkexiv2
+libkdcraw
+libksane
+okular
+gwenview
+kamera
+kcolorchooser
+kgamma
+kolourpaint
+kruler
+ksaneplugin
+ksnapshot
+svgpart
+kdegraphics-mobipocket
+kdegraphics-strigi-analyzer
+kdegraphics-thumbnailers
+
+# kdebindings
+smokegen
+smokeqt
+qtruby
+perlqt
+smokekde
+korundum
+perlkde
+pykde4
+kross-interpreters
+
+# kdeutils
+ark
+filelight
+kcalc
+kcharselect
+kdf
+kfloppy
+kgpg
+printer-applet
+kremotecontrol
+ktimer
+kwallet
+superkaramba
+sweeper
+ksecrets
+
+# kdepim
+kdepim-runtime
+
+# polkit-kde
+polkit-kde-agent-1
+polkit-kde-kcmodules-1
+
+# extragear
+bluedevil
+k3b
+kaudiocreator
+kplayer
+kwebkitpart
+oxygen-gtk2
+kdevplatform
+kdevelop-pg-qt
+kdevelop
+#kdevelop-php
+quanta
+wicd-kde
+networkmanagement
+skanlite
+libktorrent
+ktorrent
+calligra
+amarok
+
diff --git a/source/kde/modules/extragear b/source/kde/modules/extragear
new file mode 100644
index 00000000..22668e18
--- /dev/null
+++ b/source/kde/modules/extragear
@@ -0,0 +1,19 @@
+bluedevil
+k3b
+kaudiocreator
+kplayer
+kwebkitpart
+oxygen-gtk2
+kdevplatform
+kdevelop-pg-qt
+kdevelop
+#kdevelop-php
+quanta
+wicd-kde
+networkmanagement
+skanlite
+libktorrent
+ktorrent
+amarok
+calligra
+
diff --git a/source/kde/modules/kdeaccessibility b/source/kde/modules/kdeaccessibility
new file mode 100644
index 00000000..0356ae52
--- /dev/null
+++ b/source/kde/modules/kdeaccessibility
@@ -0,0 +1,7 @@
+#kdeaccessibility
+#jovie
+kaccessible
+kmouth
+kmousetool
+kmag
+
diff --git a/source/kde/modules/kdeadmin b/source/kde/modules/kdeadmin
new file mode 100644
index 00000000..9408973e
--- /dev/null
+++ b/source/kde/modules/kdeadmin
@@ -0,0 +1 @@
+kdeadmin
diff --git a/source/kde/modules/kdeartwork b/source/kde/modules/kdeartwork
new file mode 100644
index 00000000..e0f2432c
--- /dev/null
+++ b/source/kde/modules/kdeartwork
@@ -0,0 +1 @@
+kdeartwork
diff --git a/source/kde/modules/kdebase b/source/kde/modules/kdebase
new file mode 100644
index 00000000..fa37c97b
--- /dev/null
+++ b/source/kde/modules/kdebase
@@ -0,0 +1,8 @@
+kde-baseapps
+kactivities
+konsole
+kate
+kde-wallpapers
+kde-workspace
+kde-runtime
+#kde-base-artwork
diff --git a/source/kde/modules/kdebindings b/source/kde/modules/kdebindings
new file mode 100644
index 00000000..67bef4ff
--- /dev/null
+++ b/source/kde/modules/kdebindings
@@ -0,0 +1,11 @@
+smokegen
+smokeqt
+qtruby
+perlqt
+smokekde
+korundum
+perlkde
+pykde4
+kross-interpreters
+kimono
+qyoto
diff --git a/source/kde/modules/kdeedu b/source/kde/modules/kdeedu
new file mode 100644
index 00000000..74c77475
--- /dev/null
+++ b/source/kde/modules/kdeedu
@@ -0,0 +1,22 @@
+libkdeedu
+analitza
+blinken
+cantor
+kalgebra
+kalzium
+kanagram
+kbruch
+kgeography
+khangman
+kig
+kiten
+klettres
+kmplot
+kstars
+ktouch
+kturtle
+kwordquiz
+marble
+parley
+rocs
+step
diff --git a/source/kde/modules/kdegames b/source/kde/modules/kdegames
new file mode 100644
index 00000000..41e45e2c
--- /dev/null
+++ b/source/kde/modules/kdegames
@@ -0,0 +1 @@
+kdegames
diff --git a/source/kde/modules/kdegraphics b/source/kde/modules/kdegraphics
new file mode 100644
index 00000000..485b3a8e
--- /dev/null
+++ b/source/kde/modules/kdegraphics
@@ -0,0 +1,17 @@
+libkipi
+libkexiv2
+libkdcraw
+libksane
+okular
+kdegraphics-mobipocket
+kdegraphics-strigi-analyzer
+kdegraphics-thumbnailers
+gwenview
+kamera
+kcolorchooser
+kgamma
+kolourpaint
+kruler
+ksaneplugin
+ksnapshot
+svgpart
diff --git a/source/kde/modules/kdelibs b/source/kde/modules/kdelibs
new file mode 100644
index 00000000..47315978
--- /dev/null
+++ b/source/kde/modules/kdelibs
@@ -0,0 +1 @@
+kdelibs
diff --git a/source/kde/modules/kdemultimedia b/source/kde/modules/kdemultimedia
new file mode 100644
index 00000000..cb104a70
--- /dev/null
+++ b/source/kde/modules/kdemultimedia
@@ -0,0 +1 @@
+kdemultimedia
diff --git a/source/kde/modules/kdenetwork b/source/kde/modules/kdenetwork
new file mode 100644
index 00000000..f8ad9adb
--- /dev/null
+++ b/source/kde/modules/kdenetwork
@@ -0,0 +1 @@
+kdenetwork
diff --git a/source/kde/modules/kdepim b/source/kde/modules/kdepim
new file mode 100644
index 00000000..7da0ed19
--- /dev/null
+++ b/source/kde/modules/kdepim
@@ -0,0 +1,3 @@
+kdepim
+kdepim-runtime
+
diff --git a/source/kde/modules/kdepimlibs b/source/kde/modules/kdepimlibs
new file mode 100644
index 00000000..d3deaebd
--- /dev/null
+++ b/source/kde/modules/kdepimlibs
@@ -0,0 +1 @@
+kdepimlibs
diff --git a/source/kde/modules/kdeplasma-addons b/source/kde/modules/kdeplasma-addons
new file mode 100644
index 00000000..cf9d5ea2
--- /dev/null
+++ b/source/kde/modules/kdeplasma-addons
@@ -0,0 +1 @@
+kdeplasma-addons
diff --git a/source/kde/modules/kdesdk b/source/kde/modules/kdesdk
new file mode 100644
index 00000000..4565576e
--- /dev/null
+++ b/source/kde/modules/kdesdk
@@ -0,0 +1 @@
+kdesdk
diff --git a/source/kde/modules/kdetoys b/source/kde/modules/kdetoys
new file mode 100644
index 00000000..87850d9c
--- /dev/null
+++ b/source/kde/modules/kdetoys
@@ -0,0 +1 @@
+kdetoys
diff --git a/source/kde/modules/kdeutils b/source/kde/modules/kdeutils
new file mode 100644
index 00000000..e4611a2f
--- /dev/null
+++ b/source/kde/modules/kdeutils
@@ -0,0 +1,16 @@
+#kdeutils
+ark
+filelight
+kcalc
+kcharselect
+kdf
+kfloppy
+kgpg
+printer-applet
+kremotecontrol
+ktimer
+kwallet
+superkaramba
+sweeper
+ksecrets
+
diff --git a/source/kde/modules/kdewebdev b/source/kde/modules/kdewebdev
new file mode 100644
index 00000000..2be324dc
--- /dev/null
+++ b/source/kde/modules/kdewebdev
@@ -0,0 +1 @@
+kdewebdev
diff --git a/source/kde/modules/oxygen-icons b/source/kde/modules/oxygen-icons
new file mode 100644
index 00000000..ab964a4e
--- /dev/null
+++ b/source/kde/modules/oxygen-icons
@@ -0,0 +1,2 @@
+oxygen-icons
+
diff --git a/source/kde/modules/polkit-kde b/source/kde/modules/polkit-kde
new file mode 100644
index 00000000..9c1e6471
--- /dev/null
+++ b/source/kde/modules/polkit-kde
@@ -0,0 +1,2 @@
+polkit-kde-agent-1
+polkit-kde-kcmodules-1
diff --git a/source/kde/noarch b/source/kde/noarch
new file mode 100644
index 00000000..0c1318f1
--- /dev/null
+++ b/source/kde/noarch
@@ -0,0 +1,5 @@
+# List packages with an $ARCH of "noarch" (i.e. packages
+# that contain no binaries) here:
+
+kde-wallpapers
+
diff --git a/source/kde/oxygen-icons/oxygen-icons.SlackBuild b/source/kde/oxygen-icons/oxygen-icons.SlackBuild
deleted file mode 100755
index bedc8e1b..00000000
--- a/source/kde/oxygen-icons/oxygen-icons.SlackBuild
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# Copyright 2008  Robby Workman, Northport, AL, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=oxygen-icons
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-echo "Building $PKGNAM-$VERSION..."
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/../src/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX:PATH=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-  make $NUMJOBS || exit 1
-  make install DESTDIR=$PKG || exit 1
-cd -
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a AUTHORS CONTRIBUTING COPYING TODO-smallversions $PKG/usr/doc/$PKGNAM-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/oxygen-icons/slack-desc b/source/kde/oxygen-icons/slack-desc
deleted file mode 100644
index 5c1c15cb..00000000
--- a/source/kde/oxygen-icons/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-oxygen-icons: oxygen-icons (Oxygen theme for the KDE Plasma Desktop)
-oxygen-icons:
-oxygen-icons: Oxygen provides a complete and modern icon theme for KDE.
-oxygen-icons:
-oxygen-icons:
-oxygen-icons:
-oxygen-icons:
-oxygen-icons:
-oxygen-icons:
-oxygen-icons: Visit the Oxygen project online:  http://www.oxygen-icons.org
-oxygen-icons:
diff --git a/source/kde/package-blacklist b/source/kde/package-blacklist
new file mode 100644
index 00000000..6451ed9e
--- /dev/null
+++ b/source/kde/package-blacklist
@@ -0,0 +1,11 @@
+# Enter packages to skip (perhaps because they aren't used on
+# this platform) below.  Just the package name -- no version
+# number is needed.
+
+## kdebindings:
+# needs c-sharp:
+kimono
+qyoto
+# ruby errors "env.h not found":
+kross-interpreters
+
diff --git a/source/kde/patch/README b/source/kde/patch/README
new file mode 100644
index 00000000..2478e45f
--- /dev/null
+++ b/source/kde/patch/README
@@ -0,0 +1,18 @@
+
+IMPORTANT!
+
+To fail/exit a script, use this:
+
+[command that fails] || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
+DO NOT USE THIS:
+
+[command that fails] || exit 1
+
+as it will cause the parent script to exit in the wrong location and possibly
+silently skip building some packages.
+
+Thanks,
+
+The Management
+
diff --git a/source/kde/patch/amarok.patch b/source/kde/patch/amarok.patch
new file mode 100644
index 00000000..35d43831
--- /dev/null
+++ b/source/kde/patch/amarok.patch
@@ -0,0 +1,3 @@
+# Build against liblastfm 1.0.1.
+cat $CWD/patch/amarok/amarok-liblastfm1.patch | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
diff --git a/source/kde/patch/amarok/amarok-liblastfm1.patch b/source/kde/patch/amarok/amarok-liblastfm1.patch
new file mode 100644
index 00000000..43499312
--- /dev/null
+++ b/source/kde/patch/amarok/amarok-liblastfm1.patch
@@ -0,0 +1,704 @@
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/CMakeLists.txt amarok-2.5.96/CMakeLists.txt
+--- amarok-2.5.96.orig/CMakeLists.txt	2012-07-31 12:17:20.000000000 +0200
++++ amarok-2.5.96/CMakeLists.txt	2012-08-02 16:34:08.465503197 +0200
+@@ -129,7 +129,7 @@
+     # macro_log_feature( STRIGI_FOUND "strigi" "Index metadata of files" "http://strigi.sourceforge.net" FALSE "" "" )
+ 
+     macro_optional_find_package(LibLastFm)
+-    macro_log_feature( LIBLASTFM_FOUND "liblastfm" "Enable Last.Fm service, including scrobbling, song submissions, and suggested song dynamic playlists" "http://cdn.last.fm/src/liblastfm-0.3.0.tar.bz2" FALSE "" "version 0.3.x (versions 1.0 or higher are incompatible)" )
++    macro_log_feature( LIBLASTFM_FOUND "liblastfm" "Enable Last.Fm service, including scrobbling, song submissions, and suggested song dynamic playlists" "http://cdn.last.fm/src/liblastfm-1.0.0.tar.gz" FALSE "1.0.0" "" )
+     macro_bool_to_01( LIBLASTFM_FOUND HAVE_LIBLASTFM )
+ 
+     macro_optional_find_package( FFmpeg )
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/cmake/modules/FindLibLastFm.cmake amarok-2.5.96/cmake/modules/FindLibLastFm.cmake
+--- amarok-2.5.96.orig/cmake/modules/FindLibLastFm.cmake	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/cmake/modules/FindLibLastFm.cmake	2012-08-02 16:32:36.418653940 +0200
+@@ -6,7 +6,7 @@
+ # LIBLASTFM_FOUND, whether liblastfm was found
+ 
+ 
+-find_path(LIBLASTFM_INCLUDE_DIR NAMES Audioscrobbler
++find_path(LIBLASTFM_INCLUDE_DIR NAMES lastfm
+    HINTS
+    ~/usr/include
+    /opt/local/include
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/LastfmReadLabelCapability.cpp amarok-2.5.96/src/LastfmReadLabelCapability.cpp
+--- amarok-2.5.96.orig/src/LastfmReadLabelCapability.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/LastfmReadLabelCapability.cpp	2012-08-02 16:32:36.419653927 +0200
+@@ -22,8 +22,7 @@
+ #include <QMap>
+ #include <QNetworkReply>
+ 
+-#include <lastfm/XmlQuery>
+-#include <ws.h>
++#include <lastfm/XmlQuery.h>
+ #include "core/support/Amarok.h"
+ 
+ namespace Capabilities
+@@ -72,7 +71,8 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            lastfm::XmlQuery lfm = m_job->readAll();
++            lastfm::XmlQuery lfm;
++            lfm.parse(m_job->readAll());
+             QList<lastfm::XmlQuery> tags = lfm.children( "tag" );
+             QStringList ret;
+             foreach( const lastfm::XmlQuery &child, tags )
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/context/engines/upcomingevents/UpcomingEventsEngine.cpp amarok-2.5.96/src/context/engines/upcomingevents/UpcomingEventsEngine.cpp
+--- amarok-2.5.96.orig/src/context/engines/upcomingevents/UpcomingEventsEngine.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/context/engines/upcomingevents/UpcomingEventsEngine.cpp	2012-08-02 16:32:35.962659642 +0200
+@@ -27,10 +27,6 @@
+ #include "EngineController.h"
+ #include "LastFmEventXmlParser.h"
+ 
+-// LastFm
+-#include <lastfm/XmlQuery>
+-#include <lastfm/ws.h>
+-
+ // KDE
+ #include <KDateTime>
+ 
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/core/support/Amarok.h amarok-2.5.96/src/core/support/Amarok.h
+--- amarok-2.5.96.orig/src/core/support/Amarok.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/core/support/Amarok.h	2012-08-02 16:32:35.962659642 +0200
+@@ -203,6 +203,7 @@
+ 
+     inline const char* discogsApiKey() { return "91734dd989"; }
+     inline const char* lastfmApiKey() { return "402d3ca8e9bc9d3cf9b85e1202944ca5"; }
++    inline const char* lastfmApiSharedSecret() { return "fe0dcde9fcd14c2d1d50665b646335e9"; }
+     inline const char* yahooBossApiKey() { return "oQepTNrV34G9Satb1dgRZ8hdl1uhJvguDSU5Knl2Xd4ALK85knYt6ylr.FTA57XMRBA-"; }
+     inline const char* flickrApiKey() { return "9c5a288116c34c17ecee37877397fe31"; }
+ }
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/ampache/LastfmInfoParser.cpp amarok-2.5.96/src/services/ampache/LastfmInfoParser.cpp
+--- amarok-2.5.96.orig/src/services/ampache/LastfmInfoParser.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/ampache/LastfmInfoParser.cpp	2012-08-02 16:32:35.954659742 +0200
+@@ -20,8 +20,7 @@
+ #include "core/support/Amarok.h"
+ #include "core/support/Debug.h"
+ 
+-#include <lastfm/XmlQuery>
+-#include <lastfm/ws.h>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <KLocale>
+ 
+@@ -55,7 +54,8 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            lastfm::XmlQuery lfm = m_jobs[ "getTrackInfo" ]->readAll();
++            lastfm::XmlQuery lfm;
++            lfm.parse( m_jobs[ "getTrackInfo" ]->readAll() );
+             lastfm::XmlQuery wiki = lfm["track"]["wiki"];
+             const QString contentText = wiki["content"].text();
+             const QString publishedDate = wiki["published"].text();
+@@ -103,7 +103,8 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            lastfm::XmlQuery lfm = m_jobs[ "getAlbumInfo" ]->readAll();
++            lastfm::XmlQuery lfm;
++            lfm.parse( m_jobs[ "getAlbumInfo" ]->readAll() );
+             lastfm::XmlQuery wiki = lfm["album"]["wiki"];
+             const QString summaryText = wiki["summary"].text();
+             const QString contentText = wiki["content"].text();
+@@ -155,7 +156,8 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            lastfm::XmlQuery lfm = m_jobs[ "getArtistInfo" ]->readAll();
++            lastfm::XmlQuery lfm;
++            lfm.parse( m_jobs[ "getArtistInfo" ]->readAll() );
+             debug() << lfm.text();
+             lastfm::XmlQuery bio = lfm["artist"]["bio"];
+             const QString summaryText = bio["summary"].text();
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/LastFmService.cpp amarok-2.5.96/src/services/lastfm/LastFmService.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/LastFmService.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/LastFmService.cpp	2012-08-02 16:32:35.955659729 +0200
+@@ -46,8 +46,8 @@
+ #include "widgets/SearchWidget.h"
+ #include "NetworkAccessManagerProxy.h"
+ 
+-#include <lastfm/Audioscrobbler> // from liblastfm
+-#include <lastfm/XmlQuery>
++#include <lastfm/Audioscrobbler.h> // from liblastfm
++#include <lastfm/XmlQuery.h>
+ 
+ #include <KLocale>
+ #include <KPasswordDialog>
+@@ -224,10 +224,7 @@
+ {
+     // set the global static Lastfm::Ws stuff
+     lastfm::ws::ApiKey = Amarok::lastfmApiKey();
+-    lastfm::ws::SharedSecret = "fe0dcde9fcd14c2d1d50665b646335e9";
+-    // testing w/ official keys
+-    //Ws::SharedSecret = "73582dfc9e556d307aead069af110ab8";
+-    //Ws::ApiKey = "c8c7b163b11f92ef2d33ba6cd3c2c3c3";
++    lastfm::ws::SharedSecret = Amarok::lastfmApiSharedSecret();
+     m_userNameArray = qstrdup( m_userName.toLatin1().data() );
+     lastfm::ws::Username = m_userNameArray;
+     if( lastfm::nam() != The::networkAccessManager() )
+@@ -309,7 +306,8 @@
+         case QNetworkReply::NoError:
+         {
+ 
+-            lastfm::XmlQuery lfm = lastfm::XmlQuery( m_jobs[ "auth" ]->readAll() );
++            lastfm::XmlQuery lfm;
++            lfm.parse( m_jobs[ "auth" ]->readAll() );
+             LastFmServiceConfig config;
+ 
+             if( lfm.children( "error" ).size() > 0 )
+@@ -359,10 +357,8 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            try
+-            {
+-                lastfm::XmlQuery lfm( m_jobs[ "getUserInfo" ]->readAll() );
+-
++            lastfm::XmlQuery lfm;
++            if( lfm.parse( m_jobs[ "getUserInfo" ]->readAll() ) ) {
+                 m_country = lfm["user"]["country"].text();
+                 m_age = lfm["user"]["age"].text();
+                 m_gender = lfm["user"]["gender"].text();
+@@ -381,9 +377,10 @@
+                 }
+                 updateProfileInfo();
+ 
+-            } catch( lastfm::ws::ParseError& e )
++            }
++            else
+             {
+-                debug() << "Got exception in parsing from last.fm:" << e.what();
++                debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+             }
+             break;
+         } case QNetworkReply::AuthenticationRequiredError:
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/LastFmServiceCollection.cpp amarok-2.5.96/src/services/lastfm/LastFmServiceCollection.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/LastFmServiceCollection.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/LastFmServiceCollection.cpp	2012-08-02 16:32:35.956659716 +0200
+@@ -26,7 +26,7 @@
+ #include "core-impl/collections/support/MemoryQueryMaker.h"
+ 
+ #include <lastfm/ws.h>
+-#include <lastfm/XmlQuery>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <QNetworkReply>
+ 
+@@ -154,10 +154,9 @@
+         case QNetworkReply::NoError:
+         {
+             // iterate through each neighbour
+-            try
++            lastfm::XmlQuery lfm;
++            if( lfm.parse( m_jobs[ "user.getNeighbours" ]->readAll() ) )
+             {
+-                lastfm::XmlQuery lfm( m_jobs[ "user.getNeighbours" ]->readAll() );
+-
+                 foreach( const lastfm::XmlQuery &e, lfm[ "neighbours" ].children( "user" ) )
+                 {
+                     const QString name = e[ "name" ].text();
+@@ -168,9 +167,10 @@
+                     addTrack( trackPtr );
+                 }
+ 
+-            } catch( lastfm::ws::ParseError& e )
++            }
++            else
+             {
+-                debug() << "Got exception in parsing from last.fm:" << e.what();
++                debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+             }
+             break;
+         }
+@@ -195,15 +195,14 @@
+         case QNetworkReply::NoError:
+         {
+             // iterate through each neighbour
+-            try
++            if( !m_jobs[ "user.getNeighbours" ] )
++            {
++                debug() << "BAD! got no result object";
++                return;
++            }
++            lastfm::XmlQuery lfm;
++            if( lfm.parse( m_jobs[ "user.getNeighbours" ]->readAll() ) )
+             {
+-                if( !m_jobs[ "user.getNeighbours" ] )
+-                {
+-                    debug() << "BAD! got no result object";
+-                    return;
+-                }
+-                lastfm::XmlQuery lfm( m_jobs[ "user.getNeighbours" ]->readAll() );
+-
+                 // iterate through each neighbour
+                 foreach( const lastfm::XmlQuery &e, lfm[ "neighbours" ].children( "user" ) )
+                 {
+@@ -218,9 +217,10 @@
+ 
+                 // should be safe, as both slots SHOULD get called before we return to the event loop...
+                 m_jobs[ "user.getNeighbours" ]->deleteLater();
+-            } catch( lastfm::ws::ParseError& e )
++            }
++            else
+             {
+-                debug() << "Got exception in parsing from last.fm:" << e.what();
++                debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+             }
+             break;
+         }
+@@ -248,10 +248,9 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            try
++            lastfm::XmlQuery lfm;
++            if( lfm.parse( m_jobs[ "user.getFriends" ]->readAll() ) )
+             {
+-                lastfm::XmlQuery lfm( m_jobs[ "user.getFriends" ]->readAll() );
+-
+                 foreach( const lastfm::XmlQuery &e, lfm[ "friends" ].children( "user" ) )
+                 {
+                     const QString name = e[ "name" ].text();
+@@ -261,9 +260,10 @@
+                     addTrack( trackPtr );
+                 }
+ 
+-            } catch( lastfm::ws::ParseError& e )
++            }
++            else
+             {
+-                debug() << "Got exception in parsing from last.fm:" << e.what();
++                debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+             }
+             break;
+         }
+@@ -293,10 +293,9 @@
+     {
+         case QNetworkReply::NoError:
+         {
+-            try
++            lastfm::XmlQuery lfm;
++            if( lfm.parse( m_jobs[ "user.getFriends" ]->readAll() ) )
+             {
+-                lastfm::XmlQuery lfm( m_jobs[ "user.getFriends" ]->readAll() );
+-
+                 foreach( const lastfm::XmlQuery &e, lfm[ "friends" ].children( "user" ) )
+                 {
+                     const QString name = e[ "name" ].text();
+@@ -306,9 +305,10 @@
+                     addTrack( trackPtr );
+                 }
+ 
+-            } catch( lastfm::ws::ParseError& e )
++            }
++            else
+             {
+-                debug() << "Got exception in parsing from last.fm:" << e.what();
++                debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+             }
+             break;
+         }
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/LastFmServiceSettings.cpp amarok-2.5.96/src/services/lastfm/LastFmServiceSettings.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/LastFmServiceSettings.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/LastFmServiceSettings.cpp	2012-08-02 16:32:35.957659703 +0200
+@@ -23,9 +23,9 @@
+ #include "NetworkAccessManagerProxy.h"
+ #include "ui_LastFmConfigWidget.h"
+ 
+-#include <lastfm/Audioscrobbler> // from liblastfm
++#include <lastfm/Audioscrobbler.h> // from liblastfm
+ #include <lastfm/ws.h>
+-#include <lastfm/XmlQuery>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <QCryptographicHash>
+ #include <QNetworkAccessManager>
+@@ -100,7 +100,7 @@
+     m_configDialog->testLogin->setText( i18n( "Testing..." ) );
+     // set the global static Lastfm::Ws stuff
+     lastfm::ws::ApiKey = Amarok::lastfmApiKey();
+-    lastfm::ws::SharedSecret = "fe0dcde9fcd14c2d1d50665b646335e9";
++    lastfm::ws::SharedSecret = Amarok::lastfmApiSharedSecret();
+     lastfm::ws::Username = qstrdup( m_configDialog->kcfg_ScrobblerUsername->text().toLatin1().data() );
+     if( lastfm::nam() != The::networkAccessManager() )
+         lastfm::setNetworkAccessManager( The::networkAccessManager() );
+@@ -126,7 +126,8 @@
+ {
+     DEBUG_BLOCK
+ 
+-    lastfm::XmlQuery lfm = lastfm::XmlQuery( m_authQuery->readAll() );
++    lastfm::XmlQuery lfm;
++    lfm.parse( m_authQuery->readAll() );
+ 
+     switch( m_authQuery->error() )
+     {
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/LastFmTreeModel.cpp amarok-2.5.96/src/services/lastfm/LastFmTreeModel.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/LastFmTreeModel.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/LastFmTreeModel.cpp	2012-08-02 16:32:35.958659691 +0200
+@@ -26,8 +26,8 @@
+ #include "AmarokMimeData.h"
+ 
+ #include <lastfm/ws.h>
+-#include <lastfm/Tag>
+-#include <lastfm/XmlQuery>
++#include <lastfm/Tag.h>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <KIcon>
+ #include <KLocale>
+@@ -68,11 +68,12 @@
+ {
+     DEBUG_BLOCK
+ 
+-    try
+-    {
+         // Iterate over each neighbor, in two passes: 1) Get data 2) Sort data, store in model
+ 
+-        lastfm::XmlQuery lfm( m_jobs[ "getNeighbours" ]->readAll() );
++    lastfm::XmlQuery lfm;
++    lfm.parse( m_jobs[ "getNeighbours" ]->readAll() );
++    if( lfm.parseError().enumValue() == lastfm::ws::NoError )
++    {
+         foreach( const lastfm::XmlQuery &e, lfm[ "neighbours" ].children ( "user" ) )
+         {
+             const QString name = e[ "name" ].text();
+@@ -88,11 +89,11 @@
+             appendUserStations( neighbor, name );
+         }
+         m_neighbors.sort();
++    } else {
++        debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
++        return;
+     }
+-    catch( lastfm::ws::ParseError e )
+-    {
+-        debug() << "Got exception in parsing from last.fm:" << e.what();
+-    }
++
+     emitRowChanged(LastFm::Neighbors);
+     m_jobs[ "getNeighbours" ]->deleteLater();
+ }
+@@ -102,11 +103,11 @@
+ {
+     DEBUG_BLOCK
+ 
+-    try
+-    {
+-        // Iterate over each friend, in two passes: 1) Get data 2) Sort data, store in model
++    // Iterate over each friend, in two passes: 1) Get data 2) Sort data, store in model
+ 
+-        lastfm::XmlQuery lfm( m_jobs[ "getFriends" ]->readAll() );
++    lastfm::XmlQuery lfm;
++    if( lfm.parse( m_jobs[ "getFriends" ]->readAll() ) )
++    {
+         foreach( const lastfm::XmlQuery &e, lfm[ "friends" ].children ( "user" ) )
+         {
+             const QString name = e[ "name" ].text();
+@@ -123,11 +124,11 @@
+             appendUserStations( afriend, name );
+         }
+         m_friends.sort();
++    } else {
++        debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
++        return;
+     }
+-    catch( lastfm::ws::ParseError e )
+-    {
+-        debug() << "Got exception in parsing from last.fm:" << e.what();
+-    }
++
+     emitRowChanged(LastFm::Friends);
+     m_jobs[ "getFriends" ]->deleteLater();
+ }
+@@ -137,10 +138,9 @@
+ {
+     DEBUG_BLOCK
+     WeightedStringList list;
+-    try
++    lastfm::XmlQuery lfm;
++    if( lfm.parse( m_jobs[ "getTopArtists" ]->readAll() ) )
+     {
+-        lastfm::XmlQuery lfm( m_jobs[ "getTopArtists" ]->readAll() );
+-
+         foreach( const lastfm::XmlQuery &e, lfm[ "topartists" ].children ( "artist" ) )
+         {
+             const QString name = e[ "name" ].text();
+@@ -158,9 +158,10 @@
+             m_myTopArtists->appendChild ( artist );
+         }
+ 
+-    } catch( lastfm::ws::ParseError e )
++    }
++    else
+     {
+-        debug() << "Got exception in parsing from last.fm:" << e.what();
++        debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+     }
+     emitRowChanged(LastFm::TopArtists);
+     m_jobs[ "getTopArtists" ]->deleteLater();
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/LastFmTreeModel.h amarok-2.5.96/src/services/lastfm/LastFmTreeModel.h
+--- amarok-2.5.96.orig/src/services/lastfm/LastFmTreeModel.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/LastFmTreeModel.h	2012-08-02 16:32:35.957659703 +0200
+@@ -22,7 +22,7 @@
+ #include "core/meta/Meta.h"
+ #include "WeightedStringList.h"
+ 
+-#include <lastfm/User>
++#include <lastfm/User.h>
+ 
+ #include <QAbstractItemModel>
+ #include <QHash>
+@@ -136,7 +136,7 @@
+     LastFmTreeItem *m_myTopArtists;
+ 
+     QString m_userName;
+-    lastfm::AuthenticatedUser m_user;
++    lastfm::User m_user;
+ 
+     QStringList m_friends;
+     QStringList m_neighbors;
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/ScrobblerAdapter.h amarok-2.5.96/src/services/lastfm/ScrobblerAdapter.h
+--- amarok-2.5.96.orig/src/services/lastfm/ScrobblerAdapter.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/ScrobblerAdapter.h	2012-08-02 16:32:35.958659691 +0200
+@@ -20,8 +20,8 @@
+ 
+ #include "core/meta/Meta.h"
+ 
+-#include <lastfm/Audioscrobbler>
+-#include <lastfm/Track>
++#include <lastfm/Audioscrobbler.h>
++#include <lastfm/Track.h>
+ 
+ #include <QVariant>
+ 
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/biases/LastFmBias.cpp amarok-2.5.96/src/services/lastfm/biases/LastFmBias.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/biases/LastFmBias.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/biases/LastFmBias.cpp	2012-08-02 16:32:35.958659691 +0200
+@@ -34,9 +34,8 @@
+ #include "core/collections/QueryMaker.h"
+ #include "core-impl/collections/support/CollectionManager.h"
+ 
+-#include "lastfm/Artist"
+-#include "lastfm/ws.h"
+-#include "lastfm/XmlQuery"
++#include <lastfm/Artist.h>
++#include <lastfm/ws.h>
+ 
+ #include <QLabel>
+ #include <QComboBox>
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/biases/WeeklyTopBias.cpp amarok-2.5.96/src/services/lastfm/biases/WeeklyTopBias.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/biases/WeeklyTopBias.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/biases/WeeklyTopBias.cpp	2012-08-02 16:32:35.960659667 +0200
+@@ -34,9 +34,9 @@
+ #include "core/collections/QueryMaker.h"
+ #include "core-impl/collections/support/CollectionManager.h"
+ 
+-#include "lastfm/Artist"
+-#include "lastfm/ws.h"
+-#include "lastfm/XmlQuery"
++#include <lastfm/Artist.h>
++#include <lastfm/ws.h>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <QNetworkReply>
+ 
+@@ -371,10 +371,9 @@
+     }
+ 
+ 
+-    try
++    lastfm::XmlQuery lfm;
++    if( lfm.parse( reply->readAll() ) )
+     {
+-        lastfm::XmlQuery lfm( reply->readAll() );
+-
+         // debug() << "got response:" << lfm;
+         QStringList artists;
+         for( int i = 0; i < lfm[ "weeklyartistchart" ].children( "artist" ).size(); i++ )
+@@ -398,10 +397,10 @@
+             warning() << "Got a reply for a week"<<week<<"that was not requested.";
+             return;
+         }
+-
+-    } catch( lastfm::ws::ParseError& e )
++    }
++    else
+     {
+-        debug() << "caught exception parsing weekly artist chart.";
++        debug() << "failed to parse weekly artist chart.";
+     }
+ 
+     reply->deleteLater();
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta.cpp amarok-2.5.96/src/services/lastfm/meta/LastFmMeta.cpp
+--- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta.cpp	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/meta/LastFmMeta.cpp	2012-08-02 16:32:35.961659655 +0200
+@@ -41,7 +41,7 @@
+ #include <QWeakPointer>
+ #include <QUrl>
+ 
+-#include <lastfm/Track>
++#include <lastfm/Track.h>
+ 
+ namespace LastFm {
+ 
+@@ -451,8 +451,7 @@
+     DEBUG_BLOCK
+ 
+     debug() << "info:" << d->lastFmTrack.artist() << d->lastFmTrack.title();
+-    d->wsReply = lastfm::MutableTrack( d->lastFmTrack ).love();
+-    connect( d->wsReply, SIGNAL( finished() ), this, SLOT( slotWsReply() ) );
++    lastfm::MutableTrack( d->lastFmTrack ).love();
+ }
+ 
+ void
+@@ -477,9 +476,9 @@
+ {
+     if( d->trackFetch->error() == QNetworkReply::NoError )
+     {
+-        try
++        lastfm::XmlQuery lfm;
++        if( lfm.parse( d->trackFetch->readAll() ) )
+         {
+-            lastfm::XmlQuery lfm( d->trackFetch->readAll() );
+             QString id = lfm[ "track" ][ "id" ].text();
+             QString streamable = lfm[ "track" ][ "streamable" ].text();
+             if( streamable.toInt() == 1 )
+@@ -487,9 +486,10 @@
+             else
+                 init();
+ 
+-        } catch( lastfm::ws::ParseError& e )
++        }
++        else
+         {
+-            debug() << "Got exception in parsing from last.fm:" << e.what();
++            debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
+         }
+     } else
+     {
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta.h amarok-2.5.96/src/services/lastfm/meta/LastFmMeta.h
+--- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/meta/LastFmMeta.h	2012-08-02 16:32:35.960659667 +0200
+@@ -24,7 +24,7 @@
+ #include "ServiceMetaBase.h" // for the SourceInfoProvider
+ 
+ 
+-#include <lastfm/Track>
++#include <lastfm/Track.h>
+ 
+ 
+ #include <QObject>
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta_p.h amarok-2.5.96/src/services/lastfm/meta/LastFmMeta_p.h
+--- amarok-2.5.96.orig/src/services/lastfm/meta/LastFmMeta_p.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/meta/LastFmMeta_p.h	2012-08-02 16:32:35.961659655 +0200
+@@ -26,10 +26,10 @@
+ #include "core/statistics/StatisticsProvider.h"
+ #include "core-impl/statistics/providers/tag/TagStatisticsProvider.h"
+ 
+-#include <lastfm/Track>
++#include <lastfm/Track.h>
+ #include <lastfm/ws.h>
+-#include <lastfm/RadioTuner>
+-#include <lastfm/XmlQuery>
++#include <lastfm/RadioTuner.h>
++#include <lastfm/XmlQuery.h>
+ 
+ #include <kio/job.h>
+ #include <kio/jobclasses.h>
+@@ -144,26 +144,24 @@
+                 return;
+             if( m_userFetch->error() == QNetworkReply::NoError )
+             {
+-                try
++                lastfm::XmlQuery lfm;
++                if( !lfm.parse( m_userFetch->readAll() ) )
+                 {
+-                    lastfm::XmlQuery lfm( m_userFetch->readAll() );
+-                    albumUrl = lfm[ "track" ][ "album" ][ "url" ].text();
+-                    trackUrl = lfm[ "track" ][ "url" ].text();
+-                    artistUrl = lfm[ "track" ][ "artist" ][ "url" ].text();
+-
+-                    notifyObservers();
++                    debug() << "Got exception in parsing from last.fm:" << lfm.parseError().message();
++                    return;
++                }
++                albumUrl = lfm[ "track" ][ "album" ][ "url" ].text();
++                trackUrl = lfm[ "track" ][ "url" ].text();
++                artistUrl = lfm[ "track" ][ "artist" ][ "url" ].text();
+ 
+-                    imageUrl = lfm[ "track" ][ "album" ][ "image size=large" ].text();
++                notifyObservers();
+ 
+-                    if( !imageUrl.isEmpty() )
+-                    {
+-                        KIO::Job* job = KIO::storedGet( KUrl( imageUrl ), KIO::Reload, KIO::HideProgressInfo );
+-                        connect( job, SIGNAL( result( KJob* ) ), this, SLOT( fetchImageFinished( KJob* ) ) );
+-                    }
++                imageUrl = lfm[ "track" ][ "album" ][ "image size=large" ].text();
+ 
+-                } catch( lastfm::ws::ParseError& e )
++                if( !imageUrl.isEmpty() )
+                 {
+-                    debug() << "Got exception in parsing from last.fm:" << e.what();
++                    KIO::Job* job = KIO::storedGet( KUrl( imageUrl ), KIO::Reload, KIO::HideProgressInfo );
++                    connect( job, SIGNAL( result( KJob* ) ), this, SLOT( fetchImageFinished( KJob* ) ) );
+                 }
+             }
+ 
+diff -U 3 -H -d -r -N -- amarok-2.5.96.orig/src/services/lastfm/meta/MultiPlayableCapabilityImpl_p.h amarok-2.5.96/src/services/lastfm/meta/MultiPlayableCapabilityImpl_p.h
+--- amarok-2.5.96.orig/src/services/lastfm/meta/MultiPlayableCapabilityImpl_p.h	2012-07-31 12:10:56.000000000 +0200
++++ amarok-2.5.96/src/services/lastfm/meta/MultiPlayableCapabilityImpl_p.h	2012-08-02 16:32:35.962659642 +0200
+@@ -25,8 +25,9 @@
+ #include "core/meta/Meta.h"
+ #include "core/capabilities/MultiPlayableCapability.h"
+ 
+-#include <lastfm/Track>
+-#include <lastfm/RadioTuner>
++#include <lastfm/Track.h>
++#include <lastfm/RadioStation.h>
++#include <lastfm/RadioTuner.h>
+ #include <lastfm/ws.h>
+ 
+ #include <KLocale>
+@@ -55,24 +56,23 @@
+         {
+             DEBUG_BLOCK
+             m_tuner = new lastfm::RadioTuner( lastfm::RadioStation( m_track->uidUrl() ) );
+-            
++
+             connect( m_tuner, SIGNAL( trackAvailable() ), this, SLOT( slotNewTrackAvailable() ) );
+-            connect( m_tuner, SIGNAL( error( lastfm::ws::Error ) ), this, SLOT( error( lastfm::ws::Error ) ) );
++            connect( m_tuner, SIGNAL( error(lastfm::ws::Error,QString) ), this, SLOT( error( lastfm::ws::Error ) ) );
+         }
+-        
++
+         virtual void fetchNext()
+         {
+             DEBUG_BLOCK
+             m_currentTrack = m_tuner->takeNextTrack();
+             m_track->setTrackInfo( m_currentTrack );
+-
+         }
+-        
++
+         using Observer::metadataChanged;
+         virtual void metadataChanged( Meta::TrackPtr track )
+         {
+             const LastFm::TrackPtr ltrack = LastFm::TrackPtr::dynamicCast( track );
+-            
++
+             if( ltrack.isNull() )
+                 return;
+ 
+@@ -94,7 +94,7 @@
+                 m_track->setTrackInfo( m_currentTrack );
+             }
+         }
+-        
++
+         virtual void skip()
+         {
+             fetchNext();
diff --git a/source/kde/patch/calligra.patch b/source/kde/patch/calligra.patch
new file mode 100644
index 00000000..aac4ebf9
--- /dev/null
+++ b/source/kde/patch/calligra.patch
@@ -0,0 +1,3 @@
+# Patch an overflow vulnerability in calligra:
+zcat $CWD/patch/calligra/calligra.words.fix_overflow.diff.gz | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
diff --git a/source/kde/patch/calligra/calligra.words.fix_overflow.diff b/source/kde/patch/calligra/calligra.words.fix_overflow.diff
new file mode 100644
index 00000000..1a68b3f9
--- /dev/null
+++ b/source/kde/patch/calligra/calligra.words.fix_overflow.diff
@@ -0,0 +1,16 @@
+diff --git a/filters/words/msword-odf/wv2/src/styles.cpp b/filters/words/msword-odf/wv2/src/styles.cpp
+index 02a82a0..78ac31d 100644
+--- a/filters/words/msword-odf/wv2/src/styles.cpp
++++ b/filters/words/msword-odf/wv2/src/styles.cpp
+@@ -248,6 +248,11 @@ throw(InvalidFormatException)
+ #ifdef WV2_DEBUG_STYLESHEET
+         wvlog << "cbUPX: " << cbUPX << endl;
+ #endif
++        // do not overflow the allocated buffer grupx
++        if (offset + cbUPX > grupxLen) {
++            wvlog << "====> Error: grupx would overflow!" << endl;
++            return false;
++        }
+         for ( U16 j = 0; j < cbUPX; ++j ) {
+             grupx[ offset + j ] = stream->readU8();  // read the whole UPX
+ #ifdef WV2_DEBUG_STYLESHEET
diff --git a/source/kde/patch/kde-workspace.patch b/source/kde/patch/kde-workspace.patch
new file mode 100644
index 00000000..27eab874
--- /dev/null
+++ b/source/kde/patch/kde-workspace.patch
@@ -0,0 +1,5 @@
+# Increase the timeout to accomodate slow-to-initialize video chipset drivers:
+zcat $CWD/patch/kde-workspace/kde-workspace.kdm.server.timeout.diff.gz | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
+# Always show 'remaining time' in the popup of the battery plasmoid:
+zcat $CWD/patch/kde-workspace/kde-workspace.batteryapplet.diff.gz | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
diff --git a/source/kde/patch/kde-workspace/kde-workspace.batteryapplet.diff b/source/kde/patch/kde-workspace/kde-workspace.batteryapplet.diff
new file mode 100644
index 00000000..ef899e83
--- /dev/null
+++ b/source/kde/patch/kde-workspace/kde-workspace.batteryapplet.diff
@@ -0,0 +1,16 @@
+diff -ur kdebase-workspace-4.5.80/plasma/generic/applets/battery/battery.cpp kdebase-workspace-4.5.80-battery-plasmoid-showremainingtime/plasma/generic/applets/battery/battery.cpp
+--- kdebase-workspace-4.5.80/plasma/generic/applets/battery/battery.cpp	2010-11-19 11:51:21.000000000 +0100
++++ kdebase-workspace-4.5.80-battery-plasmoid-showremainingtime/plasma/generic/applets/battery/battery.cpp	2010-11-20 20:39:11.000000000 +0100
+@@ -712,7 +712,11 @@
+             m_acInfoLabel->setText(i18n("<b>Not plugged in</b>"));
+         }
+ 
+-        if (batteryCount && showRemainingTime && m_remainingMSecs > 0) {
++        // Always show the remaining time in the popup.
++        // We don't just set m_showRemainingTime to true by default because
++        // that'd try to use the time also for the icon. That won't fit on
++        // small panels.
++        if (batteryCount && m_remainingMSecs > 0) {
+             m_remainingTimeLabel->show();
+             m_remainingInfoLabel->show();
+             // we don't have too much accuracy so only give hours and minutes
diff --git a/source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff b/source/kde/patch/kde-workspace/kde-workspace.kdm.server.timeout.diff
index 4dd98484..4dd98484 100644
--- a/source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff
+++ b/source/kde/patch/kde-workspace/kde-workspace.kdm.server.timeout.diff
diff --git a/source/kde/patch/kdelibs.patch b/source/kde/patch/kdelibs.patch
new file mode 100644
index 00000000..d66622e0
--- /dev/null
+++ b/source/kde/patch/kdelibs.patch
@@ -0,0 +1,8 @@
+# Slackware ships a different version of XML DTDs:
+zcat $CWD/patch/kdelibs/kdelibs.docbook.patch.gz | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
+# Make uPnP support depend on the environment variable SOLID_UPNP,
+# e.g. by creating an /etc/profile.d/upnp.sh file with the following contents:
+# export SOLID_UPNP=1
+cat $CWD/patch/kdelibs/kdelibs.upnp_conditional.patch | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
diff --git a/source/kde/kdelibs/kdelibs.docbook.patch b/source/kde/patch/kdelibs/kdelibs.docbook.patch
index 6a20cd27..6a20cd27 100644
--- a/source/kde/kdelibs/kdelibs.docbook.patch
+++ b/source/kde/patch/kdelibs/kdelibs.docbook.patch
diff --git a/source/kde/patch/kdelibs/kdelibs.upnp_conditional.patch b/source/kde/patch/kdelibs/kdelibs.upnp_conditional.patch
new file mode 100644
index 00000000..3a194477
--- /dev/null
+++ b/source/kde/patch/kdelibs/kdelibs.upnp_conditional.patch
@@ -0,0 +1,15 @@
+--- kdelibs-4.8.0/solid/solid/managerbase.cpp.orig	2011-07-27 20:34:39.000000000 +0200
++++ kdelibs-4.8.0/solid/solid/managerbase.cpp	2012-01-26 09:17:49.409993419 +0100
+@@ -90,7 +90,11 @@
+ #        endif
+ 
+ #        if defined (HUPNP_FOUND)
+-            m_backends << new Solid::Backends::UPnP::UPnPDeviceManager(0);
++            bool solidUpnpEnabled
++                = QString::fromLocal8Bit(qgetenv("SOLID_UPNP")).toInt()==1;
++            if (solidUpnpEnabled) {
++                m_backends << new Solid::Backends::UPnP::UPnPDeviceManager(0);
++            }
+ #        endif
+     }
+ }
diff --git a/source/kde/patch/kdepim.patch b/source/kde/patch/kdepim.patch
new file mode 100644
index 00000000..7618dc8a
--- /dev/null
+++ b/source/kde/patch/kdepim.patch
@@ -0,0 +1,3 @@
+# Install the kleopatra headers, or else kopete-cryptography will not build:
+cat $CWD/patch/kdepim/kdepim-4.5.85-install-headers.patch | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
diff --git a/source/kde/patch/kdepim/kdepim-4.5.85-install-headers.patch b/source/kde/patch/kdepim/kdepim-4.5.85-install-headers.patch
new file mode 100644
index 00000000..aa43059a
--- /dev/null
+++ b/source/kde/patch/kdepim/kdepim-4.5.85-install-headers.patch
@@ -0,0 +1,124 @@
+diff -ur kdepim-4.5.85/kleopatra/libkleopatraclient/CMakeLists.txt kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/CMakeLists.txt
+--- kdepim-4.5.85/kleopatra/libkleopatraclient/CMakeLists.txt	2010-01-27 01:22:34.000000000 +0100
++++ kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/CMakeLists.txt	2010-12-08 14:40:45.000000000 +0100
+@@ -6,3 +6,7 @@
+ 
+ add_subdirectory( tests )
+ 
++install(
++  FILES kleopatraclient_export.h
++  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient
++  )
+diff -ur kdepim-4.5.85/kleopatra/libkleopatraclient/core/CMakeLists.txt kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/core/CMakeLists.txt
+--- kdepim-4.5.85/kleopatra/libkleopatraclient/core/CMakeLists.txt	2010-11-19 11:51:51.000000000 +0100
++++ kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/core/CMakeLists.txt	2010-12-08 14:42:12.000000000 +0100
+@@ -55,4 +55,12 @@
+   DESTINATION ${LIB_INSTALL_DIR}
+   )
+   
+-
++install(
++  FILES
++    initialization.h
++    command.h
++    selectcertificatecommand.h
++    signencryptfilescommand.h
++    decryptverifyfilescommand.h
++  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/core
++  )
+diff -ur kdepim-4.5.85/kleopatra/libkleopatraclient/gui/CMakeLists.txt kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/gui/CMakeLists.txt
+--- kdepim-4.5.85/kleopatra/libkleopatraclient/gui/CMakeLists.txt	2010-07-29 11:58:45.000000000 +0200
++++ kdepim-4.5.85-install-headers/kleopatra/libkleopatraclient/gui/CMakeLists.txt	2010-12-08 14:42:41.000000000 +0100
+@@ -20,3 +20,8 @@
+   DESTINATION ${LIB_INSTALL_DIR}
+   )
+ 
++install(
++  FILES
++    certificaterequester.h
++  DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/gui
++  )
+diff -ur kdepim-4.5.85/libkleo/CMakeLists.txt kdepim-4.5.85-install-headers/libkleo/CMakeLists.txt
+--- kdepim-4.5.85/libkleo/CMakeLists.txt	2010-12-01 23:23:12.000000000 +0100
++++ kdepim-4.5.85-install-headers/libkleo/CMakeLists.txt	2010-12-08 15:22:00.000000000 +0100
+@@ -112,6 +112,64 @@
+ set_target_properties(kleo PROPERTIES VERSION ${GENERIC_LIB_VERSION} SOVERSION ${GENERIC_LIB_SOVERSION} )
+ install(TARGETS kleo ${INSTALL_TARGETS_DEFAULT_ARGS})
+ 
++install( FILES
++    kleo/kleo_export.h
++    kleo/enum.h
++    kleo/oidmap.h
++    kleo/cryptobackend.h
++    kleo/cryptobackendfactory.h
++    kleo/cryptoconfig.h
++    kleo/dn.h
++    kleo/job.h
++    kleo/keylistjob.h
++    kleo/keygenerationjob.h
++    kleo/abstractimportjob.h
++    kleo/importjob.h
++    kleo/importfromkeyserverjob.h
++    kleo/exportjob.h
++    kleo/changeexpiryjob.h
++    kleo/changeownertrustjob.h
++    kleo/downloadjob.h
++    kleo/deletejob.h
++    kleo/encryptjob.h
++    kleo/decryptjob.h
++    kleo/signjob.h
++    kleo/specialjob.h
++    kleo/verifydetachedjob.h
++    kleo/verifyopaquejob.h
++    kleo/decryptverifyjob.h
++    kleo/signencryptjob.h
++    kleo/signkeyjob.h
++    kleo/adduseridjob.h
++    kleo/refreshkeysjob.h
++    kleo/multideletejob.h
++    kleo/hierarchicalkeylistjob.h
++    kleo/keyfilter.h
++    kleo/keyfiltermanager.h
++    kleo/changepasswdjob.h
++    kleo/checksumdefinition.h
++    kleo/exception.h
++    kleo/kconfigbasedkeyfilter.h
++    kleo/listallkeysjob.h
++    kleo/stl_util.h
++    DESTINATION ${INCLUDE_INSTALL_DIR}/kleo COMPONENT Devel)
++
++install ( FILES
++    ui/kdhorizontalline.h
++    ui/messagebox.h
++    ui/progressbar.h
++    ui/progressdialog.h
++    ui/keylistview.h
++    ui/keyselectiondialog.h
++    ui/keyrequester.h
++    ui/keyapprovaldialog.h
++    ui/dnattributeorderconfigwidget.h
++    ui/cryptoconfigmodule.h
++    ui/cryptoconfigdialog.h
++    ui/directoryserviceswidget.h
++    ui/filenamerequester.h
++    DESTINATION ${INCLUDE_INSTALL_DIR}/kleo/ui COMPONENT Devel)
++
+ if ( WIN32 )
+ install ( FILES libkleopatrarc-win32.desktop DESTINATION ${CONFIG_INSTALL_DIR} RENAME libkleopatrarc )
+ else ( WIN32 )
+diff -ur kdepim-4.5.85/libkpgp/CMakeLists.txt kdepim-4.5.85-install-headers/libkpgp/CMakeLists.txt
+--- kdepim-4.5.85/libkpgp/CMakeLists.txt	2010-07-29 11:59:00.000000000 +0200
++++ kdepim-4.5.85-install-headers/libkpgp/CMakeLists.txt	2010-12-08 14:43:33.000000000 +0100
+@@ -35,3 +35,11 @@
+ install(FILES kpgp.upd  DESTINATION ${KCONF_UPDATE_INSTALL_DIR})
+ install(PROGRAMS kpgp-3.1-upgrade-address-data.pl DESTINATION ${KCONF_UPDATE_INSTALL_DIR})
+ 
++install(FILES
++        kpgp.h
++        kpgpbase.h
++        kpgpblock.h
++        kpgpkey.h
++        kpgpui.h
++        libkpgp_export.h
++        DESTINATION ${INCLUDE_INSTALL_DIR}/kpgp COMPONENT Devel )
+
diff --git a/source/kde/patch/kdewebdev.patch b/source/kde/patch/kdewebdev.patch
new file mode 100644
index 00000000..ccac0a79
--- /dev/null
+++ b/source/kde/patch/kdewebdev.patch
@@ -0,0 +1,5 @@
+# Make it find tidy:
+zcat $CWD/patch/kdewebdev/include-tidy.patch.gz \
+  | sed -e "s#/tmp/package-kdewebdev#${SLACK_KDE_BUILD_DIR}/${module}/package-kdewebdev#" \
+  | patch -p0 --verbose \
+  || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
diff --git a/source/kde/kdewebdev/include-tidy.patch b/source/kde/patch/kdewebdev/include-tidy.patch
index fd4de940..fd4de940 100644
--- a/source/kde/kdewebdev/include-tidy.patch
+++ b/source/kde/patch/kdewebdev/include-tidy.patch
diff --git a/source/kde/patch/korundum.patch b/source/kde/patch/korundum.patch
new file mode 100644
index 00000000..7a8b7cfa
--- /dev/null
+++ b/source/kde/patch/korundum.patch
@@ -0,0 +1,4 @@
+# Build against Ruby 1.9.3.
+# See also https://bugs.kde.org/show_bug.cgi?id=287057
+cat $CWD/patch/korundum/korundum_ruby19.patch | patch -p1 --verbose || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
diff --git a/source/kde/patch/korundum/korundum_ruby19.patch b/source/kde/patch/korundum/korundum_ruby19.patch
new file mode 100644
index 00000000..561d8de1
--- /dev/null
+++ b/source/kde/patch/korundum/korundum_ruby19.patch
@@ -0,0 +1,31 @@
+diff -up korundum-4.8.0/src/krubypluginfactory.cpp.ruby19 korundum-4.8.0/src/krubypluginfactory.cpp
+--- korundum-4.8.0/src/krubypluginfactory.cpp.ruby19	2011-07-27 13:37:29.000000000 -0500
++++ korundum-4.8.0/src/krubypluginfactory.cpp	2012-02-17 08:30:38.785635819 -0600
+@@ -39,7 +39,7 @@
+ extern "C" {
+ extern VALUE rb_load_path;
+ extern VALUE qt_internal_module;
+-void Init_prelude(void);
++// void Init_prelude(void);
+ }
+ 
+ //
+@@ -165,7 +165,7 @@ QObject *KRubyPluginFactory::create(cons
+ #if RUBY_VERSION >= 0x10900
+     VALUE gem = rb_define_module("Gem");
+     rb_const_set(gem, rb_intern("Enable"), Qtrue);
+-    Init_prelude(); 
++//    Init_prelude(); 
+ #endif
+ 
+     ruby_incpush(QFile::encodeName(program.path()));
+@@ -342,7 +342,7 @@ int kdemain(int argc, char **argv)
+ #if RUBY_VERSION >= 0x10900
+     VALUE gem = rb_define_module("Gem");
+     rb_const_set(gem, rb_intern("Enable"), Qtrue);
+-    Init_prelude();                                             
++//    Init_prelude();                                             
+ #endif
+ 
+     ruby_incpush(QFile::encodeName(program.path()));
+
diff --git a/source/kde/polkit-kde-1/local.options b/source/kde/polkit-kde-1/local.options
deleted file mode 100644
index 4e14dd77..00000000
--- a/source/kde/polkit-kde-1/local.options
+++ /dev/null
@@ -1,2 +0,0 @@
-VERSION=r1145544
-BUILD=2
diff --git a/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild b/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild
deleted file mode 100755
index eb896170..00000000
--- a/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-polkit-kde-1
-
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/kde ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/kde
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building polkit-kde-1-$VERSION..."
-tar xvf $CWD/../src/polkit-kde-1-$VERSION.tar.?z* || exit 1
-cd polkit-kde-1-$VERSION
-
-zcat $CWD/polkit-kde-1.nodrkonqi.diff.gz | patch -p1 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/polkit-kde-1-$VERSION
-cp -a \
-  COPYING* README* \
-  $PKG/usr/doc/polkit-kde-1-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/polkit-kde-1-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/polkit-kde-1/polkit-kde-1.nodrkonqi.diff b/source/kde/polkit-kde-1/polkit-kde-1.nodrkonqi.diff
deleted file mode 100644
index 60fd8b7b..00000000
--- a/source/kde/polkit-kde-1/polkit-kde-1.nodrkonqi.diff
+++ /dev/null
@@ -1,17 +0,0 @@
---- ./agent/main.cpp.orig	2010-07-05 10:08:40.000000000 -0500
-+++ ./agent/main.cpp	2011-03-30 18:52:38.636002143 -0500
-@@ -21,11 +21,14 @@
- #include <KCmdLineArgs>
- #include <KAboutData>
- #include <KLocale>
-+#include <cstdlib>
- 
- #include "policykitkde.h"
- 
- int main(int argc, char *argv[])
- {
-+    setenv("KDE_DEBUG", "true", 1);
-+
-     KAboutData aboutData("policykit1-kde", "polkit-kde-authentication-agent-1", ki18n("PolicyKit1-KDE"), "0.96.1",
-                          ki18n("PolicyKit1-KDE"), KAboutData::License_GPL,
-                          ki18n("(c) 2009 Red Hat, Inc."));
diff --git a/source/kde/polkit-kde-1/slack-desc b/source/kde/polkit-kde-1/slack-desc
deleted file mode 100644
index 8e0a3ad6..00000000
--- a/source/kde/polkit-kde-1/slack-desc
+++ /dev/null
@@ -1,18 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-           |-----handy-ruler-----------------------------------------------------|
-polkit-kde-1: polkit-kde-1 (KDE polkit authenticator)
-polkit-kde-1:
-polkit-kde-1: This is a polkit authenticator for KDE.
-polkit-kde-1: 
-polkit-kde-1: 
-polkit-kde-1: 
-polkit-kde-1: 
-polkit-kde-1:
-polkit-kde-1: 
-polkit-kde-1:
diff --git a/source/kde/polkit-kde-agent-1/local.options b/source/kde/polkit-kde-agent-1/local.options
deleted file mode 100644
index 416b9670..00000000
--- a/source/kde/polkit-kde-agent-1/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=20101202git
diff --git a/source/kde/polkit-kde-agent-1/polkit-kde-agent-1.SlackBuild b/source/kde/polkit-kde-agent-1/polkit-kde-agent-1.SlackBuild
deleted file mode 100755
index d49026a1..00000000
--- a/source/kde/polkit-kde-agent-1/polkit-kde-agent-1.SlackBuild
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-polkit-kde-agent-1
-
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/kde ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/kde
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building polkit-kde-agent-1-$VERSION..."
-tar xvf $CWD/../src/polkit-kde-agent-1-$VERSION.tar.?z* || exit 1
-cd polkit-kde-agent-1-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/polkit-kde-agent-1-$VERSION
-cp -a \
-  COPYING* README* \
-  $PKG/usr/doc/polkit-kde-agent-1-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/polkit-kde-agent-1-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/polkit-kde-agent-1/pull-polkit-kde-agent-1 b/source/kde/polkit-kde-agent-1/pull-polkit-kde-agent-1
deleted file mode 100644
index 34da1087..00000000
--- a/source/kde/polkit-kde-agent-1/pull-polkit-kde-agent-1
+++ /dev/null
@@ -1,6 +0,0 @@
-rm -rf polkit-kde-agent-1
-git clone git://anongit.kde.org/polkit-kde-agent-1
-( cd polkit-kde-agent-1 && rm -rf .git* )
-mv polkit-kde-agent-1 polkit-kde-agent-1-$(date +%Y%m%d)git
-tar cf polkit-kde-agent-1-$(date +%Y%m%d)git.tar polkit-kde-agent-1-$(date +%Y%m%d)git
-xz -9 polkit-kde-agent-1-$(date +%Y%m%d)git.tar
diff --git a/source/kde/polkit-kde-agent-1/slack-desc b/source/kde/polkit-kde-agent-1/slack-desc
deleted file mode 100644
index 8b6f29ba..00000000
--- a/source/kde/polkit-kde-agent-1/slack-desc
+++ /dev/null
@@ -1,18 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler-----------------------------------------------------|
-polkit-kde-agent-1: polkit-kde-agent-1 (KDE polkit authenticator)
-polkit-kde-agent-1:
-polkit-kde-agent-1: This is a polkit authenticator for KDE.
-polkit-kde-agent-1: 
-polkit-kde-agent-1: 
-polkit-kde-agent-1: 
-polkit-kde-agent-1: 
-polkit-kde-agent-1:
-polkit-kde-agent-1: 
-polkit-kde-agent-1:
diff --git a/source/kde/polkit-kde-kcmodules-1/local.options b/source/kde/polkit-kde-kcmodules-1/local.options
deleted file mode 100644
index 416b9670..00000000
--- a/source/kde/polkit-kde-kcmodules-1/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=20101202git
diff --git a/source/kde/polkit-kde-kcmodules-1/polkit-kde-kcmodules-1.SlackBuild b/source/kde/polkit-kde-kcmodules-1/polkit-kde-kcmodules-1.SlackBuild
deleted file mode 100755
index 1a3bde05..00000000
--- a/source/kde/polkit-kde-kcmodules-1/polkit-kde-kcmodules-1.SlackBuild
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-polkit-kde-kcmodules-1
-
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/kde ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/kde
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building polkit-kde-kcmodules-1-$VERSION..."
-tar xvf $CWD/../src/polkit-kde-kcmodules-1-$VERSION.tar.?z* || exit 1
-cd polkit-kde-kcmodules-1-$VERSION
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/polkit-kde-kcmodules-1-$VERSION
-cp -a \
-  COPYING* README* \
-  $PKG/usr/doc/polkit-kde-kcmodules-1-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/polkit-kde-kcmodules-1-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/polkit-kde-kcmodules-1/pull-polkit-kde-kcmodules-1 b/source/kde/polkit-kde-kcmodules-1/pull-polkit-kde-kcmodules-1
deleted file mode 100644
index de50ef5a..00000000
--- a/source/kde/polkit-kde-kcmodules-1/pull-polkit-kde-kcmodules-1
+++ /dev/null
@@ -1,6 +0,0 @@
-rm -rf polkit-kde-kcmodules-1
-git clone git://anongit.kde.org/polkit-kde-kcmodules-1
-( cd polkit-kde-kcmodules-1 && rm -rf .git* )
-mv polkit-kde-kcmodules-1 polkit-kde-kcmodules-1-$(date +%Y%m%d)git
-tar cf polkit-kde-kcmodules-1-$(date +%Y%m%d)git.tar polkit-kde-kcmodules-1-$(date +%Y%m%d)git
-xz -9 polkit-kde-kcmodules-1-$(date +%Y%m%d)git.tar
diff --git a/source/kde/polkit-kde-kcmodules-1/slack-desc b/source/kde/polkit-kde-kcmodules-1/slack-desc
deleted file mode 100644
index 57c6169a..00000000
--- a/source/kde/polkit-kde-kcmodules-1/slack-desc
+++ /dev/null
@@ -1,18 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                      |-----handy-ruler-----------------------------------------------------|
-polkit-kde-kcmodules-1: polkit-kde-kcmodules (KDE polkit kcmodules)
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1: This package contains the kcm_polkit modules for KDE.
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
-polkit-kde-kcmodules-1:
diff --git a/source/kde/polkit-qt-1/local.options b/source/kde/polkit-qt-1/local.options
deleted file mode 100644
index 80b46a0a..00000000
--- a/source/kde/polkit-qt-1/local.options
+++ /dev/null
@@ -1,3 +0,0 @@
-#VERSION=0.95.1
-VERSION=r1145513
-BUILD=2
diff --git a/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild b/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild
deleted file mode 100755
index c2126b95..00000000
--- a/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-polkit-qt-1
-
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $PKG/usr
-cd $TMP
-echo "Building polkit-qt-1-$VERSION..."
-tar xvf $CWD/../src/polkit-qt-1-$VERSION.tar.?z* || exit 1
-cd polkit-qt-1-$VERSION
-
-zcat $CWD/polkit-qt-1.null-checking.diff.gz | patch -p0 --verbose || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || make || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/polkit-qt-1-$VERSION
-cp -a COPYING* README* $PKG/usr/doc/polkit-qt-1-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/polkit-qt-1-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/kde/polkit-qt-1/polkit-qt-1.null-checking.diff b/source/kde/polkit-qt-1/polkit-qt-1.null-checking.diff
deleted file mode 100644
index 0ec2a8e3..00000000
--- a/source/kde/polkit-qt-1/polkit-qt-1.null-checking.diff
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: agent/polkitqt1-agent-listener.cpp
-===================================================================
---- agent/polkitqt1-agent-listener.cpp	(revision 1183495)
-+++ agent/polkitqt1-agent-listener.cpp	(working copy)
-@@ -66,7 +66,8 @@
-     qDebug("Destroying listener");
- 
-     ListenerAdapter::instance()->removeListener(this);
--    g_object_unref(d->listener);
-+    if (d->listener != NULL)
-+        g_object_unref(d->listener);
- }
- 
- bool Listener::registerListener(PolkitQt1::Subject *subject, const QString &objectPath)
diff --git a/source/kde/polkit-qt-1/slack-desc b/source/kde/polkit-qt-1/slack-desc
deleted file mode 100644
index ea4ffe06..00000000
--- a/source/kde/polkit-qt-1/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-           |-----handy-ruler-----------------------------------------------------|
-polkit-qt-1: polkit-qt-1 (Qt polkit API wrapper)
-polkit-qt-1:
-polkit-qt-1: polkit-qt-1 aims to make it easy for Qt developers to take advantage
-polkit-qt-1: of the polkit API.  It is a convenience wrapper around QAction and
-polkit-qt-1: QAbstractButton that lets you integrate those two components
-polkit-qt-1: easily with polkit.
-polkit-qt-1:
-polkit-qt-1:
-polkit-qt-1:
-polkit-qt-1: Homepage: http://techbase.kde.org/Polkit-Qt-1
-polkit-qt-1:
diff --git a/source/kde/post-install/k3b.post-install b/source/kde/post-install/k3b.post-install
new file mode 100644
index 00000000..88101148
--- /dev/null
+++ b/source/kde/post-install/k3b.post-install
@@ -0,0 +1,2 @@
+# Move the dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
diff --git a/source/kde/post-install/kde-baseapps.post-install b/source/kde/post-install/kde-baseapps.post-install
new file mode 100644
index 00000000..8dda6366
--- /dev/null
+++ b/source/kde/post-install/kde-baseapps.post-install
@@ -0,0 +1,9 @@
+# Add profile scripts
+mkdir -p $PKG/etc/profile.d
+cat $CWD/post-install/kde-baseapps/profile.d/kde.sh \
+  | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" \
+  > $PKG/etc/profile.d/kde.sh
+cat $CWD/post-install/kde-baseapps/profile.d/kde.csh \
+  | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" \
+  > $PKG/etc/profile.d/kde.csh
+chmod 0755 $PKG/etc/profile.d/*
diff --git a/source/kde/kdebase/profile.d/kde.csh b/source/kde/post-install/kde-baseapps/profile.d/kde.csh
index a09579bf..a09579bf 100755..100644
--- a/source/kde/kdebase/profile.d/kde.csh
+++ b/source/kde/post-install/kde-baseapps/profile.d/kde.csh
diff --git a/source/kde/kdebase/profile.d/kde.sh b/source/kde/post-install/kde-baseapps/profile.d/kde.sh
index 6f0199e2..6f0199e2 100755..100644
--- a/source/kde/kdebase/profile.d/kde.sh
+++ b/source/kde/post-install/kde-baseapps/profile.d/kde.sh
diff --git a/source/kde/post-install/kde-runtime.post-install b/source/kde/post-install/kde-runtime.post-install
new file mode 100644
index 00000000..fbdacfab
--- /dev/null
+++ b/source/kde/post-install/kde-runtime.post-install
@@ -0,0 +1,9 @@
+# Create a symlink in /usr/bin to the kdesu binary
+( cd $PKG/usr/bin ; ln -s /usr/lib${LIBDIRSUFFIX}/kde4/libexec/kdesu . )
+
+# Remove the hicolor icon theme index.theme so it doesn't clobber the real one
+rm -f $PKG/usr/share/icons/hicolor/index.theme
+
+# Move the dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
+
diff --git a/source/kde/post-install/kde-workspace.post-install b/source/kde/post-install/kde-workspace.post-install
new file mode 100644
index 00000000..69952c78
--- /dev/null
+++ b/source/kde/post-install/kde-workspace.post-install
@@ -0,0 +1,46 @@
+
+# Use ck-launch-session in runlevel 3,
+# to start and attach a ConsoleKit session to the X session:
+mkdir -p $PKG/etc/X11/xinit
+cat $CWD/post-install/kde-workspace/xinit/xinitrc.kde > $PKG/etc/X11/xinit/xinitrc.kde
+chmod 0755 $PKG/etc/X11/xinit/xinitrc.kde
+
+# Setup config files for KDM:
+$PKG/usr/bin/genkdmconf --no-old --no-old-scripts --no-backup --in $PKG/usr/share/config/kdm
+
+# Add Slackware's standard xsessions path to kdmrc and remove the redundant
+# xsession files for XFCE (those are installed by the xcfe package):
+if ! grep -q "SessionsDirs=/usr/share/xsessions" $PKG/usr/share/config/kdm/kdmrc ; then
+  sed -i -e "/SessionsDirs=/s#SessionsDirs=\(.*\)\$#SessionsDirs=/usr/share/xsessions,\1#" $PKG/usr/share/config/kdm/kdmrc
+fi
+rm $PKG/usr/share/apps/kdm/sessions/xfce*.desktop
+
+# Not allowing root to login at the console is just plain silly.  If they 
+# have physical access to the machine, what's the point of trying to stop 
+# this?  Even the kdmrc file says this is supposed to be the default.
+sed -i 's/AllowRootLogin=false/AllowRootLogin=true/' \
+  $PKG/usr/share/config/kdm/kdmrc 
+# We are also not ready to create a separate 'kdm' non-root user:
+sed -i 's/GreeterUID=kdm/#&/' \
+  $PKG/usr/share/config/kdm/kdmrc 
+
+# Add a .new suffix so we don't mangle an existing file:
+mv $PKG/usr/share/config/kdm/kdmrc $PKG/usr/share/config/kdm/kdmrc.new
+
+cp -a $PKG/usr/share/config/kdm/Xsession $PKG/usr/share/config/kdm/Xsession.orig
+cat $CWD/post-install/kde-workspace/config/Xsession | sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" \
+  > $PKG/usr/share/config/kdm/Xsession
+
+# Add a .new suffix so we don't mangle an existing file:
+mv $PKG/usr/share/config/kdm/backgroundrc $PKG/usr/share/config/kdm/backgroundrc.new
+
+# Move the KDM files someplace FHS compliant:
+mkdir -p $PKG/etc/kde
+mv $PKG/usr/share/config/kdm $PKG/etc/kde
+( cd $PKG/usr/share/config ; ln -sf ../../../etc/kde/kdm . )
+
+# Move the polkit dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
+
+# This is fubar:
+rm -f $PKG/usr/share/icons/hicolor/index.theme
diff --git a/source/kde/kdebase-workspace/config/Xsession b/source/kde/post-install/kde-workspace/config/Xsession
index 736f5d5c..736f5d5c 100644
--- a/source/kde/kdebase-workspace/config/Xsession
+++ b/source/kde/post-install/kde-workspace/config/Xsession
diff --git a/source/kde/kdebase-workspace/config/Xsession.orig b/source/kde/post-install/kde-workspace/config/Xsession.orig
index 43d78b8d..43d78b8d 100644
--- a/source/kde/kdebase-workspace/config/Xsession.orig
+++ b/source/kde/post-install/kde-workspace/config/Xsession.orig
diff --git a/source/kde/kdebase-workspace/xinit/xinitrc.kde b/source/kde/post-install/kde-workspace/xinit/xinitrc.kde
index a33eb06c..a33eb06c 100755..100644
--- a/source/kde/kdebase-workspace/xinit/xinitrc.kde
+++ b/source/kde/post-install/kde-workspace/xinit/xinitrc.kde
diff --git a/source/kde/post-install/kdelibs.post-install b/source/kde/post-install/kdelibs.post-install
new file mode 100644
index 00000000..9239a3e5
--- /dev/null
+++ b/source/kde/post-install/kdelibs.post-install
@@ -0,0 +1,2 @@
+# Move the polkit dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
diff --git a/source/kde/post-install/kdepim.post-install b/source/kde/post-install/kdepim.post-install
new file mode 100644
index 00000000..88101148
--- /dev/null
+++ b/source/kde/post-install/kdepim.post-install
@@ -0,0 +1,2 @@
+# Move the dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
diff --git a/source/kde/post-install/konsole.post-install b/source/kde/post-install/konsole.post-install
new file mode 100644
index 00000000..b0ef9a6b
--- /dev/null
+++ b/source/kde/post-install/konsole.post-install
@@ -0,0 +1,12 @@
+# "konsole -ls" is no longer valid syntax for konsole, even though it's
+# still documented in the help manual.  Here's a way to get the same
+# thing, and it works here, but I honestly don't know how it will act
+# everywhere with every shell.  I just know it works with bash and ksh
+sed -i -e 's/Exec=konsole/Exec=konsole -e $SHELL -l/' \
+  $PKG/usr/share/applications/kde4/konsole.desktop
+
+## I find this a little bit too bright...  <change by pjv>
+## Change the konsole defaults to look like the real Linux console:
+#sed -i 's/ColorScheme=Linux/ColorScheme=WhiteOnBlack/' \
+#  $PKG/usr/share/apps/konsole/Shell.profile
+
diff --git a/source/kde/post-install/wicd-kde.post-install b/source/kde/post-install/wicd-kde.post-install
new file mode 100644
index 00000000..88101148
--- /dev/null
+++ b/source/kde/post-install/wicd-kde.post-install
@@ -0,0 +1,2 @@
+# Move the dbus configuration files to the proper place:
+mv $PKG/etc/kde/dbus-1 $PKG/etc/
diff --git a/source/kde/pre-install/README b/source/kde/pre-install/README
new file mode 100644
index 00000000..2478e45f
--- /dev/null
+++ b/source/kde/pre-install/README
@@ -0,0 +1,18 @@
+
+IMPORTANT!
+
+To fail/exit a script, use this:
+
+[command that fails] || { touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
+
+DO NOT USE THIS:
+
+[command that fails] || exit 1
+
+as it will cause the parent script to exit in the wrong location and possibly
+silently skip building some packages.
+
+Thanks,
+
+The Management
+
diff --git a/source/kde/pre-install/amarok.pre-install b/source/kde/pre-install/amarok.pre-install
new file mode 100644
index 00000000..2deb1063
--- /dev/null
+++ b/source/kde/pre-install/amarok.pre-install
@@ -0,0 +1,10 @@
+if [ ! -r /usr/lib${LIBDIRSUFFIX}/libmysqld.a ]; then
+  cat << EOF
+ERROR:  missing /usr/lib${LIBDIRSUFFIX}/libmysqld.a
+        please use mysql-embedded.SlackBuild in source/ap/mysql/
+        to build and install a mysql package containing libmysqld.a,
+        and then try again.
+EOF
+  touch ${SLACK_KDE_BUILD_DIR}/${PKGNAME}.failed ; continue ;
+fi
+
diff --git a/source/kde/pre-install/kdewebdev.pre-install b/source/kde/pre-install/kdewebdev.pre-install
new file mode 100644
index 00000000..6cd51b1c
--- /dev/null
+++ b/source/kde/pre-install/kdewebdev.pre-install
@@ -0,0 +1,6 @@
+# First, build and install Tidy:
+cd $CWD/pre-install/kdewebdev/tidy 
+  echo "Building htmltidy..."
+  ARCH=$ARCH sh ./tidy.build $PKG
+cd -
+
diff --git a/source/kde/kdewebdev/tidy/get-tidy-cvs.sh b/source/kde/pre-install/kdewebdev/tidy/get-tidy-cvs.sh
index e4fb4b20..e4fb4b20 100755..100644
--- a/source/kde/kdewebdev/tidy/get-tidy-cvs.sh
+++ b/source/kde/pre-install/kdewebdev/tidy/get-tidy-cvs.sh
diff --git a/source/kde/kdewebdev/tidy/tidy.SlackBuild b/source/kde/pre-install/kdewebdev/tidy/tidy.SlackBuild
index 6d8c3a7d..6d8c3a7d 100755
--- a/source/kde/kdewebdev/tidy/tidy.SlackBuild
+++ b/source/kde/pre-install/kdewebdev/tidy/tidy.SlackBuild
diff --git a/source/kde/kdewebdev/tidy/tidy.build b/source/kde/pre-install/kdewebdev/tidy/tidy.build
index b638b24e..b638b24e 100755..100644
--- a/source/kde/kdewebdev/tidy/tidy.build
+++ b/source/kde/pre-install/kdewebdev/tidy/tidy.build
diff --git a/source/kde/skanlite/local.options b/source/kde/skanlite/local.options
deleted file mode 100644
index a62bafe0..00000000
--- a/source/kde/skanlite/local.options
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=0.7
diff --git a/source/kde/skanlite/skanlite.SlackBuild b/source/kde/skanlite/skanlite.SlackBuild
deleted file mode 100755
index a156933c..00000000
--- a/source/kde/skanlite/skanlite.SlackBuild
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/sh
-
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-skanlite
-
-# Set the config option variables if they are not already set:
-if [ -r ../KDE.options ]; then
-  . ../KDE.options
-fi
-
-# The global options may be overridden here (if needed):
-if [ -r ./local.options ]; then
-  . ./local.options
-fi
-
-# Avoid a version number in .la files:
-if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
-  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-echo "Building skanlite-$VERSION..."
-tar xvf $CWD/../src/extragear/skanlite-$VERSION.tar.?z* || exit 1
-cd skanlite-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-cmake \
-  -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-  -DCMAKE_INSTALL_PREFIX=/usr \
-  -DMAN_INSTALL_DIR=/usr/man \
-  -DSYSCONF_INSTALL_DIR=/etc/kde \
-  -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-  .
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-if [ -d $PKG/usr/man ]; then
-  gzip -9 $PKG/usr/man/man?/*
-fi
-
-mkdir -p $PKG/usr/doc/skanlite-$VERSION
-cp -a COPYING* $PKG/usr/doc/skanlite-$VERSION
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/skanlite-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
-
diff --git a/source/kde/amarok/slack-desc b/source/kde/slack-desc/amarok
index 8ee63979..8ee63979 100644
--- a/source/kde/amarok/slack-desc
+++ b/source/kde/slack-desc/amarok
diff --git a/source/kde/slack-desc/analitza b/source/kde/slack-desc/analitza
new file mode 100644
index 00000000..84123be4
--- /dev/null
+++ b/source/kde/slack-desc/analitza
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+analitza: analitza (library to add mathematical features to programs)
+analitza:
+analitza: The analitza library will let you add mathematical features
+analitza: to your program. 
+analitza:
+analitza: For more information, visit:
+analitza:   https://projects.kde.org/projects/kde/kdeedu/analitza
+analitza:
+analitza:
+analitza:
+analitza:
diff --git a/source/kde/slack-desc/ark b/source/kde/slack-desc/ark
new file mode 100644
index 00000000..93dd1c89
--- /dev/null
+++ b/source/kde/slack-desc/ark
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+ark: ark (KDE archiver tool)
+ark:
+ark: This is KDE's application to work with compressed archives.
+ark:
+ark: Ark's home page is:  http://kde.org
+ark:
+ark:
+ark:
+ark:
+ark:
+ark:
diff --git a/source/kde/slack-desc/blinken b/source/kde/slack-desc/blinken
new file mode 100644
index 00000000..72773dd5
--- /dev/null
+++ b/source/kde/slack-desc/blinken
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+blinken: blinken (a memory enhancement game)
+blinken:
+blinken: Blinken is a memory enhancement game for KDE.
+blinken:
+blinken: For more information, visit:  http://edu.kde.org/
+blinken:
+blinken:
+blinken:
+blinken:
+blinken:
+blinken:
diff --git a/source/kde/slack-desc/bluedevil b/source/kde/slack-desc/bluedevil
new file mode 100644
index 00000000..60e3dde9
--- /dev/null
+++ b/source/kde/slack-desc/bluedevil
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also customary
+# to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+bluedevil: bluedevil (bluetooth stack for KDE)
+bluedevil:
+bluedevil: BlueDevil is the bluetooth stack for KDE.
+bluedevil:
+bluedevil: Homepage: http://www.afiestas.org/
+bluedevil:
+bluedevil:
+bluedevil:
+bluedevil:
+bluedevil:
+bluedevil:
diff --git a/source/kde/slack-desc/calligra b/source/kde/slack-desc/calligra
new file mode 100644
index 00000000..a1f52617
--- /dev/null
+++ b/source/kde/slack-desc/calligra
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+calligra: calligra (KDE office productivity suite)
+calligra:
+calligra: Calligra office productivity applications.  Included are a word
+calligra: processor, spreadsheet, presentation program, chart and graph creator,
+calligra: vector graphics tool, database report creator, flowcharting program,
+calligra: integrated data management program, a pixel graphics editor,
+calligra: a mathematical formula editor, and Calligra Workspace
+calligra: (a combination of all of the above).
+calligra:
+calligra: For more information, see:  http://calligra-suite.org/
+calligra:
diff --git a/source/kde/slack-desc/cantor b/source/kde/slack-desc/cantor
new file mode 100644
index 00000000..34cf867a
--- /dev/null
+++ b/source/kde/slack-desc/cantor
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+cantor: cantor (front-end to mathematics software)
+cantor:
+cantor: Cantor is a frontend to several existing mathematical software
+cantor: such as R, Sage and Maxima: Cantor.
+cantor: Cantor offers a worksheet as a nice GUI for all those backends
+cantor: and is not targeted to kids but to scientists.
+cantor:
+cantor: For more information, visit:  http://edu.kde.org/
+cantor:
+cantor:
+cantor:
diff --git a/source/kde/slack-desc/digikam b/source/kde/slack-desc/digikam
new file mode 100644
index 00000000..607801ea
--- /dev/null
+++ b/source/kde/slack-desc/digikam
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler-----------------------------------------------------|
+digikam: digiKam (KDE Photo Management Application)
+digikam:
+digikam: digiKam is a simple digital photo management application for KDE,
+digikam: which makes importing and organizing digital photos a "snap". The
+digikam: photos can be organized in albums which can be sorted
+digikam: chronologically, by directory layout, or by custom collections.  An
+digikam: easy to use interface enables you to connect to your camera and
+digikam: preview, download, and/or delete your images.
+digikam:
+digikam: Homepage: http://www.digikam.org/
+digikam:
diff --git a/source/kde/slack-desc/filelight b/source/kde/slack-desc/filelight
new file mode 100644
index 00000000..f86e2f0e
--- /dev/null
+++ b/source/kde/slack-desc/filelight
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mfilelights the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+filelight: filelight (file system monitor)
+filelight:
+filelight: Filelight allows you to quickly understand exactly where your
+filelight: diskspace is being used by graphically representing your file system.
+filelight:
+filelight: filelight's home page is:  http://utils.kde.org/projects/filelight
+filelight:
+filelight:
+filelight:
+filelight:
+filelight:
diff --git a/source/kde/slack-desc/gwenview b/source/kde/slack-desc/gwenview
new file mode 100644
index 00000000..bc56b129
--- /dev/null
+++ b/source/kde/slack-desc/gwenview
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gwenview: gwenview (image viewer for KDE)
+gwenview:
+gwenview: Gwenview is a simple image viewer for KDE.  It features a folder tree
+gwenview: window and a file list window, providing easy navigation of your file
+gwenview: hierarchy.
+gwenview:
+gwenview: For more information, visit:  http://www.kde.org
+gwenview:
+gwenview:
+gwenview:
+gwenview:
diff --git a/source/kde/slack-desc/jovie b/source/kde/slack-desc/jovie
new file mode 100644
index 00000000..6a52283d
--- /dev/null
+++ b/source/kde/slack-desc/jovie
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+jovie: jovie (Text-to-speech daemon)
+jovie:
+jovie: Jovie is the KDE Text To Speech Daemon, which can be used from any
+jovie: KDE application that uses the interface from kdelibs.
+jovie:
+jovie: For more information, visit:  http://www.kde.org
+jovie:
+jovie:
+jovie:
+jovie:
+jovie:
diff --git a/source/kde/k3b/slack-desc b/source/kde/slack-desc/k3b
index 032bbb8a..032bbb8a 100644
--- a/source/kde/k3b/slack-desc
+++ b/source/kde/slack-desc/k3b
diff --git a/source/kde/slack-desc/kaccessible b/source/kde/slack-desc/kaccessible
new file mode 100644
index 00000000..77b96635
--- /dev/null
+++ b/source/kde/slack-desc/kaccessible
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kaccessible: kaccessible (Accessibility bridge)
+kaccessible:
+kaccessible: Kaccessible implements a QAccessibleBridgePlugin to provide
+kaccessible: accessibility services like focus tracking and a screenreader.
+kaccessible:
+kaccessible: For more information, visit:  http://www.kde.org
+kaccessible:
+kaccessible:
+kaccessible:
+kaccessible:
+kaccessible:
diff --git a/source/kde/slack-desc/kactivities b/source/kde/slack-desc/kactivities
new file mode 100644
index 00000000..2ca504af
--- /dev/null
+++ b/source/kde/slack-desc/kactivities
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kactivities: kactivities (API for using and interacting with Activities)
+kactivities:
+kactivities: API for using and interacting with Activities as a consumer,
+kactivities: application adding information to them or as an activity manager.
+kactivities:
+kactivities: For more information, visit:  http://www.kde.org
+kactivities:
+kactivities:
+kactivities:
+kactivities:
+kactivities:
diff --git a/source/kde/slack-desc/kalgebra b/source/kde/slack-desc/kalgebra
new file mode 100644
index 00000000..aefc3cc8
--- /dev/null
+++ b/source/kde/slack-desc/kalgebra
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+kalgebra: kalgebra (a graph calculator)
+kalgebra:
+kalgebra: KAlgebra is a MathML-based graph calculator.  It was initially mathml
+kalgebra: oriented, but now it can be used by anyone with a little mathematic
+kalgebra: knowledge.
+kalgebra:
+kalgebra: For more information, visit:  http://edu.kde.org/
+kalgebra:
+kalgebra:
+kalgebra:
+kalgebra:
diff --git a/source/kde/slack-desc/kalzium b/source/kde/slack-desc/kalzium
new file mode 100644
index 00000000..b96c7bce
--- /dev/null
+++ b/source/kde/slack-desc/kalzium
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+kalzium: kalzium (periodic table of the elements)
+kalzium:
+kalzium: Kalzium shows a periodic table of the elements.
+kalzium:
+kalzium: For more information, visit:  http://edu.kde.org/
+kalzium:
+kalzium:
+kalzium:
+kalzium:
+kalzium:
+kalzium:
diff --git a/source/kde/slack-desc/kamera b/source/kde/slack-desc/kamera
new file mode 100644
index 00000000..8d86f1d3
--- /dev/null
+++ b/source/kde/slack-desc/kamera
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+kamera: kamera (digital camera support for KDE)
+kamera:
+kamera: Digital camera support for KDE.
+kamera:
+kamera: For more information, visit:  http://www.kde.org
+kamera:
+kamera:
+kamera:
+kamera:
+kamera:
+kamera:
diff --git a/source/kde/slack-desc/kanagram b/source/kde/slack-desc/kanagram
new file mode 100644
index 00000000..98288f55
--- /dev/null
+++ b/source/kde/slack-desc/kanagram
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+kanagram: kanagram (letter game)
+kanagram:
+kanagram: Kanagram is a replacement for KMessedWords.  Kanagram mixes up the
+kanagram: letters of a word to create an anagram, and you have to guess what
+kanagram: the mixed up word is.  Kanagram features several built-in word lists,
+kanagram: hints, and a cheat feature which reveals the original word.
+kanagram: Kanagram also has a vocabulary editor.
+kanagram:
+kanagram: For more information, visit:  http://edu.kde.org/
+kanagram:
+kanagram:
diff --git a/source/kde/slack-desc/kate b/source/kde/slack-desc/kate
new file mode 100644
index 00000000..9b19944a
--- /dev/null
+++ b/source/kde/slack-desc/kate
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler-----------------------------------------------------|
+kate: kate (an advanced text editor for KDE)
+kate:
+kate: The Kate project develops two main products:
+kate: KatePart, the advanced editor component which is used in numerous KDE
+kate: applications requiring a text editing component, and Kate, a MDI text
+kate: editor application.  In addition, we provide KWrite, a simple SDI
+kate: editor shell which allows the user to select his/her favorite editor
+kate: component.
+kate:
+kate: Homepage: http://kate-editor.org
+kate:
diff --git a/source/kde/kaudiocreator/slack-desc b/source/kde/slack-desc/kaudiocreator
index 3de37723..3de37723 100644
--- a/source/kde/kaudiocreator/slack-desc
+++ b/source/kde/slack-desc/kaudiocreator
diff --git a/source/kde/slack-desc/kbruch b/source/kde/slack-desc/kbruch
new file mode 100644
index 00000000..43a2aa38
--- /dev/null
+++ b/source/kde/slack-desc/kbruch
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kbruch: kbruch (calculate fractions)
+kbruch:
+kbruch: KBruch is a small program to practice calculating with fractions.
+kbruch:
+kbruch: For more information, visit:  http://edu.kde.org/
+kbruch:
+kbruch:
+kbruch:
+kbruch:
+kbruch:
+kbruch:
diff --git a/source/kde/slack-desc/kcalc b/source/kde/slack-desc/kcalc
new file mode 100644
index 00000000..f5144c5c
--- /dev/null
+++ b/source/kde/slack-desc/kcalc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkcalcs the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+kcalc: kcalc (KDE calculator)
+kcalc:
+kcalc: KCalc is a calculator which offers many more mathematical functions
+kcalc: than meet the eye on a first glance.
+kcalc:
+kcalc: kcalc's home page is:  http://utils.kde.org/projects/kcalc
+kcalc:
+kcalc:
+kcalc:
+kcalc:
+kcalc:
diff --git a/source/kde/slack-desc/kcharselect b/source/kde/slack-desc/kcharselect
new file mode 100644
index 00000000..3c937dd0
--- /dev/null
+++ b/source/kde/slack-desc/kcharselect
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkcharselects the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kcharselect: kcharselect (character picker)
+kcharselect:
+kcharselect: KCharSelect is a tool to select special characters from all
+kcharselect: installed fonts and copy them into the clipboard.
+kcharselect:
+kcharselect: kcharselect's home page:  http://utils.kde.org/projects/kcharselect
+kcharselect:
+kcharselect:
+kcharselect:
+kcharselect:
+kcharselect:
diff --git a/source/kde/slack-desc/kcolorchooser b/source/kde/slack-desc/kcolorchooser
new file mode 100644
index 00000000..61e356d2
--- /dev/null
+++ b/source/kde/slack-desc/kcolorchooser
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+kcolorchooser: kcolorchooser (color chooser)
+kcolorchooser:
+kcolorchooser: A color chooser application for KDE.
+kcolorchooser:
+kcolorchooser: For more information, visit:  http://www.kde.org
+kcolorchooser:
+kcolorchooser:
+kcolorchooser:
+kcolorchooser:
+kcolorchooser:
+kcolorchooser:
diff --git a/source/kde/slack-desc/kde-base b/source/kde/slack-desc/kde-base
new file mode 100644
index 00000000..d00d2bf6
--- /dev/null
+++ b/source/kde/slack-desc/kde-base
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+kde-base: kde-base (KDE core applications and files)
+kde-base:
+kde-base: This package provides the core applications and infrastructure files
+kde-base: for the KDE Plasma Desktop.
+kde-base:
+kde-base:
+kde-base:
+kde-base:
+kde-base:
+kde-base:
+kde-base:
diff --git a/source/kde/slack-desc/kde-base-artwork b/source/kde/slack-desc/kde-base-artwork
new file mode 100644
index 00000000..f7df2d0f
--- /dev/null
+++ b/source/kde/slack-desc/kde-base-artwork
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+kde-base-artwork: kde-base-artwork (KDE themes artwork)
+kde-base-artwork:
+kde-base-artwork: This package contains KSplash themes and other artwork.
+kde-base-artwork:
+kde-base-artwork: For more information, visit:  http://www.kde.org
+kde-base-artwork:
+kde-base-artwork:
+kde-base-artwork:
+kde-base-artwork:
+kde-base-artwork:
+kde-base-artwork:
diff --git a/source/kde/slack-desc/kde-baseapps b/source/kde/slack-desc/kde-baseapps
new file mode 100644
index 00000000..ad9ef35e
--- /dev/null
+++ b/source/kde/slack-desc/kde-baseapps
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+kde-baseapps: kde-baseapps (KDE core applications and files)
+kde-baseapps:
+kde-baseapps: This package provides the core applications and infrastructure files
+kde-baseapps: for the KDE Plasma Desktop.
+kde-baseapps:
+kde-baseapps: For more info, visit:  http://www.kde.org
+kde-baseapps:
+kde-baseapps:
+kde-baseapps:
+kde-baseapps:
+kde-baseapps:
diff --git a/source/kde/slack-desc/kde-bindings b/source/kde/slack-desc/kde-bindings
new file mode 100644
index 00000000..36020536
--- /dev/null
+++ b/source/kde/slack-desc/kde-bindings
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+kde-bindings: kde-bindings (KDE language bindings)
+kde-bindings:
+kde-bindings: KDE and most KDE applications are implemented using the C++
+kde-bindings: programming language, but that doesn't mean you don't have a choice.
+kde-bindings: This package contains a number of bindings to other languages,
+kde-bindings: including scripting languages and other systems' programming
+kde-bindings: languages, allowing them to be used to create applications for the
+kde-bindings: KDE Platform.
+kde-bindings:
+kde-bindings:
+kde-bindings:
diff --git a/source/kde/slack-desc/kde-educational b/source/kde/slack-desc/kde-educational
new file mode 100644
index 00000000..bccdeb31
--- /dev/null
+++ b/source/kde/slack-desc/kde-educational
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+kde-educational: kde-educational (Educational applications)
+kde-educational:
+kde-educational: Educational applications for the KDE Software Compilation.
+kde-educational:
+kde-educational:
+kde-educational:
+kde-educational:
+kde-educational:
+kde-educational:
+kde-educational:
+kde-educational:
diff --git a/source/kde/slack-desc/kde-runtime b/source/kde/slack-desc/kde-runtime
new file mode 100644
index 00000000..279b2bfd
--- /dev/null
+++ b/source/kde/slack-desc/kde-runtime
@@ -0,0 +1,18 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+           |-----handy-ruler------------------------------------------------------|
+kde-runtime: kde-runtime (KDE runtime core)
+kde-runtime:
+kde-runtime: This package contains core components of the KDE base runtime module.
+kde-runtime:
+kde-runtime:
+kde-runtime:
+kde-runtime:
+kde-runtime:
+kde-runtime:
+kde-runtime:
+kde-runtime:
diff --git a/source/kde/slack-desc/kde-wallpapers b/source/kde/slack-desc/kde-wallpapers
new file mode 100644
index 00000000..e78fbfb4
--- /dev/null
+++ b/source/kde/slack-desc/kde-wallpapers
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+              |-----handy-ruler-------------------------------------------------|
+kde-wallpapers: kde-wallpapers (Wallpapers for KDE)
+kde-wallpapers:
+kde-wallpapers: Additional wallpapers for KDE.
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
+kde-wallpapers:
diff --git a/source/kde/slack-desc/kde-workspace b/source/kde/slack-desc/kde-workspace
new file mode 100644
index 00000000..3027e733
--- /dev/null
+++ b/source/kde/slack-desc/kde-workspace
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+kde-workspace: kde-workspace (KDE Plasma Desktop)
+kde-workspace:
+kde-workspace: This package provides the essential parts of the KDE Plasma Desktop
+kde-workspace: that are presented to the user.
+kde-workspace:
+kde-workspace:
+kde-workspace:
+kde-workspace:
+kde-workspace:
+kde-workspace:
+kde-workspace:
diff --git a/source/kde/slack-desc/kdeaccessibility b/source/kde/slack-desc/kdeaccessibility
new file mode 100644
index 00000000..e176b388
--- /dev/null
+++ b/source/kde/slack-desc/kdeaccessibility
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+kdeaccessibility: kdeaccessibility (Accessibility programs for KDE)
+kdeaccessibility:
+kdeaccessibility: KDE accessibility programs, including kmag (a screen magnifier),
+kdeaccessibility: kmousetool (clicks the mouse for you), and kmouth (a speech
+kdeaccessibility: synthesizer frontend).
+kdeaccessibility:
+kdeaccessibility:
+kdeaccessibility:
+kdeaccessibility:
+kdeaccessibility:
+kdeaccessibility:
diff --git a/source/kde/kdeadmin/slack-desc b/source/kde/slack-desc/kdeadmin
index cef43076..cef43076 100644
--- a/source/kde/kdeadmin/slack-desc
+++ b/source/kde/slack-desc/kdeadmin
diff --git a/source/kde/kdeartwork/slack-desc b/source/kde/slack-desc/kdeartwork
index cc5f6f18..cc5f6f18 100644
--- a/source/kde/kdeartwork/slack-desc
+++ b/source/kde/slack-desc/kdeartwork
diff --git a/source/kde/kdebase/slack-desc b/source/kde/slack-desc/kdebase
index bf91423e..bf91423e 100644
--- a/source/kde/kdebase/slack-desc
+++ b/source/kde/slack-desc/kdebase
diff --git a/source/kde/kdebase-runtime/slack-desc b/source/kde/slack-desc/kdebase-runtime
index 09bf5774..09bf5774 100644
--- a/source/kde/kdebase-runtime/slack-desc
+++ b/source/kde/slack-desc/kdebase-runtime
diff --git a/source/kde/slack-desc/kdebase-workspace b/source/kde/slack-desc/kdebase-workspace
new file mode 100644
index 00000000..2ec11412
--- /dev/null
+++ b/source/kde/slack-desc/kdebase-workspace
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+kdebase-workspace: kdebase-workspace (KDE Plasma Desktop)
+kdebase-workspace:
+kdebase-workspace: This package provides the essential parts of the KDE Plasma Desktop
+kdebase-workspace: that are presented to the user.
+kdebase-workspace:
+kdebase-workspace:
+kdebase-workspace:
+kdebase-workspace:
+kdebase-workspace:
+kdebase-workspace:
+kdebase-workspace:
diff --git a/source/kde/kdebindings/slack-desc b/source/kde/slack-desc/kdebindings
index e927c76f..e927c76f 100644
--- a/source/kde/kdebindings/slack-desc
+++ b/source/kde/slack-desc/kdebindings
diff --git a/source/kde/kdeedu/slack-desc b/source/kde/slack-desc/kdeedu
index b97fdd75..b97fdd75 100644
--- a/source/kde/kdeedu/slack-desc
+++ b/source/kde/slack-desc/kdeedu
diff --git a/source/kde/kdegames/slack-desc b/source/kde/slack-desc/kdegames
index c821c7fa..c821c7fa 100644
--- a/source/kde/kdegames/slack-desc
+++ b/source/kde/slack-desc/kdegames
diff --git a/source/kde/kdegraphics/slack-desc b/source/kde/slack-desc/kdegraphics
index 7184942e..7184942e 100644
--- a/source/kde/kdegraphics/slack-desc
+++ b/source/kde/slack-desc/kdegraphics
diff --git a/source/kde/slack-desc/kdegraphics-mobipocket b/source/kde/slack-desc/kdegraphics-mobipocket
new file mode 100644
index 00000000..2704d364
--- /dev/null
+++ b/source/kde/slack-desc/kdegraphics-mobipocket
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                      |-----handy-ruler------------------------------------------------------|
+kdegraphics-mobipocket: kdegraphics-mobipocket (Mobipocket support for Okular)
+kdegraphics-mobipocket:
+kdegraphics-mobipocket: Mobipocket support for Okular.
+kdegraphics-mobipocket:
+kdegraphics-mobipocket: For more information, visit:  http://www.kde.org/
+kdegraphics-mobipocket:
+kdegraphics-mobipocket:
+kdegraphics-mobipocket:
+kdegraphics-mobipocket:
+kdegraphics-mobipocket:
+kdegraphics-mobipocket:
diff --git a/source/kde/slack-desc/kdegraphics-strigi-analyzer b/source/kde/slack-desc/kdegraphics-strigi-analyzer
new file mode 100644
index 00000000..307e5aab
--- /dev/null
+++ b/source/kde/slack-desc/kdegraphics-strigi-analyzer
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                           |-----handy-ruler------------------------------------------------------|
+kdegraphics-strigi-analyzer: kdegraphics-strigi-analyzer (graphics plugins for strigi)
+kdegraphics-strigi-analyzer:
+kdegraphics-strigi-analyzer: Graphics file format plugins for Strigi Desktop Search.
+kdegraphics-strigi-analyzer: These plugins allow Strigi Desktop Search to extract
+kdegraphics-strigi-analyzer: additional information about several document and graphic file
+kdegraphics-strigi-analyzer: formats.
+kdegraphics-strigi-analyzer:
+kdegraphics-strigi-analyzer: For more information, visit:  http://www.kde.org
+kdegraphics-strigi-analyzer:
+kdegraphics-strigi-analyzer:
+kdegraphics-strigi-analyzer:
diff --git a/source/kde/slack-desc/kdegraphics-thumbnailers b/source/kde/slack-desc/kdegraphics-thumbnailers
new file mode 100644
index 00000000..1f781d56
--- /dev/null
+++ b/source/kde/slack-desc/kdegraphics-thumbnailers
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                        |-----handy-ruler------------------------------------------------------|
+kdegraphics-thumbnailers: kdegraphics-thumbnailers (thumbnailers for various graphics formats)
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers: These plugins allow KDE software to create thumbnails for
+kdegraphics-thumbnailers: several advanced graphic file formats.
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers: For more information, visit:  http://www.kde.org
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers:
+kdegraphics-thumbnailers:
diff --git a/source/kde/kdelibs/slack-desc b/source/kde/slack-desc/kdelibs
index a89ea3c8..a89ea3c8 100644
--- a/source/kde/kdelibs/slack-desc
+++ b/source/kde/slack-desc/kdelibs
diff --git a/source/kde/slack-desc/kdemultimedia b/source/kde/slack-desc/kdemultimedia
new file mode 100644
index 00000000..cd058627
--- /dev/null
+++ b/source/kde/slack-desc/kdemultimedia
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+kdemultimedia: kdemultimedia (KDE multimedia applications)
+kdemultimedia:
+kdemultimedia: Multimedia applications for the KDE Software Compilation.
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
+kdemultimedia:
diff --git a/source/kde/kdenetwork/slack-desc b/source/kde/slack-desc/kdenetwork
index 90120dd9..90120dd9 100644
--- a/source/kde/kdenetwork/slack-desc
+++ b/source/kde/slack-desc/kdenetwork
diff --git a/source/kde/kdepim/slack-desc b/source/kde/slack-desc/kdepim
index 7a66c176..7a66c176 100644
--- a/source/kde/kdepim/slack-desc
+++ b/source/kde/slack-desc/kdepim
diff --git a/source/kde/kdepim-runtime/slack-desc b/source/kde/slack-desc/kdepim-runtime
index cb0ac6e7..cb0ac6e7 100644
--- a/source/kde/kdepim-runtime/slack-desc
+++ b/source/kde/slack-desc/kdepim-runtime
diff --git a/source/kde/kdepimlibs/slack-desc b/source/kde/slack-desc/kdepimlibs
index cbd08ba4..cbd08ba4 100644
--- a/source/kde/kdepimlibs/slack-desc
+++ b/source/kde/slack-desc/kdepimlibs
diff --git a/source/kde/kdeplasma-addons/slack-desc b/source/kde/slack-desc/kdeplasma-addons
index a9bc5738..a9bc5738 100644
--- a/source/kde/kdeplasma-addons/slack-desc
+++ b/source/kde/slack-desc/kdeplasma-addons
diff --git a/source/kde/kdesdk/slack-desc b/source/kde/slack-desc/kdesdk
index f954a27a..f954a27a 100644
--- a/source/kde/kdesdk/slack-desc
+++ b/source/kde/slack-desc/kdesdk
diff --git a/source/kde/kdetoys/slack-desc b/source/kde/slack-desc/kdetoys
index 9af6c602..9af6c602 100644
--- a/source/kde/kdetoys/slack-desc
+++ b/source/kde/slack-desc/kdetoys
diff --git a/source/kde/slack-desc/kdeutils b/source/kde/slack-desc/kdeutils
new file mode 100644
index 00000000..927ac436
--- /dev/null
+++ b/source/kde/slack-desc/kdeutils
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler---------------------------------------------------|
+kdeutils: kdeutils (KDE Utilities)
+kdeutils:
+kdeutils: This package includes utilities for the KDE Software Compilation.
+kdeutils:
+kdeutils:
+kdeutils:
+kdeutils:
+kdeutils:
+kdeutils:
+kdeutils:
+kdeutils:
diff --git a/source/kde/kdevelop/slack-desc b/source/kde/slack-desc/kdevelop
index 49f2da12..49f2da12 100644
--- a/source/kde/kdevelop/slack-desc
+++ b/source/kde/slack-desc/kdevelop
diff --git a/source/kde/slack-desc/kdevelop-pg-qt b/source/kde/slack-desc/kdevelop-pg-qt
new file mode 100644
index 00000000..3b158dd2
--- /dev/null
+++ b/source/kde/slack-desc/kdevelop-pg-qt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kdevelop-pg-qt: kdevelop-pg-qt (KDevelop Parser Generator)
+kdevelop-pg-qt:
+kdevelop-pg-qt: KDevelop Parser Generator used in the PHP language plugin and others.
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
+kdevelop-pg-qt:
diff --git a/source/kde/kdevplatform/slack-desc b/source/kde/slack-desc/kdevplatform
index 04fe68c9..04fe68c9 100644
--- a/source/kde/kdevplatform/slack-desc
+++ b/source/kde/slack-desc/kdevplatform
diff --git a/source/kde/kdewebdev/slack-desc b/source/kde/slack-desc/kdewebdev
index 294ef22e..294ef22e 100644
--- a/source/kde/kdewebdev/slack-desc
+++ b/source/kde/slack-desc/kdewebdev
diff --git a/source/kde/slack-desc/kdf b/source/kde/slack-desc/kdf
new file mode 100644
index 00000000..896ade48
--- /dev/null
+++ b/source/kde/slack-desc/kdf
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkdiskfrees the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+kdf: kdf (show available disk space)
+kdf:
+kdf: kdf (KDiskFree) displays the available file devices (hard drive
+kdf: partitions, floppy and CD/DVD drives, etc.) along with information on
+kdf: their capacity, free space, type and mount point.
+kdf:
+kdf: kdf's home page is:  http://utils.kde.org/projects/kdf
+kdf:
+kdf:
+kdf:
+kdf:
diff --git a/source/kde/slack-desc/kfloppy b/source/kde/slack-desc/kfloppy
new file mode 100644
index 00000000..761f2275
--- /dev/null
+++ b/source/kde/slack-desc/kfloppy
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkfloppys the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+kfloppy: kfloppy (floppy disk formatter)
+kfloppy:
+kfloppy: KFloppy is a utility that provides a straightforward graphical means
+kfloppy: to format 3.5" and 5.25" floppy disks.
+kfloppy:
+kfloppy: kfloppy's home page is:  http://utils.kde.org/projects/kfloppy
+kfloppy:
+kfloppy:
+kfloppy:
+kfloppy:
+kfloppy:
diff --git a/source/kde/slack-desc/kgamma b/source/kde/slack-desc/kgamma
new file mode 100644
index 00000000..be461c56
--- /dev/null
+++ b/source/kde/slack-desc/kgamma
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kgamma: kgamma (display gamma configuration)
+kgamma:
+kgamma: A KDE system settings module to configure display gamma.
+kgamma:
+kgamma: For more information, visit:  http://www.kde.org
+kgamma:
+kgamma:
+kgamma:
+kgamma:
+kgamma:
+kgamma:
diff --git a/source/kde/slack-desc/kgeography b/source/kde/slack-desc/kgeography
new file mode 100644
index 00000000..cb03bc57
--- /dev/null
+++ b/source/kde/slack-desc/kgeography
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+kgeography: kgeography (a geography learning tool)
+kgeography:
+kgeography: KGeography is a geography learning tool.
+kgeography: Right now it has three usage modes:
+kgeography: * Browse the maps clicking in a map division to see it's name
+kgeography: * The game tells you a map division name and you have to click on it
+kgeography: * The game shows you a map division flag and you have to guess
+kgeography:   its name 
+kgeography:
+kgeography: For more information, visit:  http://kgeography.berlios.de/
+kgeography:
diff --git a/source/kde/slack-desc/kgpg b/source/kde/slack-desc/kgpg
new file mode 100644
index 00000000..51975cd1
--- /dev/null
+++ b/source/kde/slack-desc/kgpg
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkgpgs the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+kgpg: kgpg (KDE GUI for GnuPG)
+kgpg:
+kgpg: KGpg is a simple interface for GnuPG, a powerful encryption utility.
+kgpg:
+kgpg: kgpg's home page is:  http://utils.kde.org/projects/kgpg
+kgpg:
+kgpg:
+kgpg:
+kgpg:
+kgpg:
+kgpg:
diff --git a/source/kde/slack-desc/khangman b/source/kde/slack-desc/khangman
new file mode 100644
index 00000000..eaf9a853
--- /dev/null
+++ b/source/kde/slack-desc/khangman
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+khangman: khangman (classical hangman game)
+khangman:
+khangman: KHangman is the classical hangman game. The child should guess a word
+khangman: letter by letter.  At each miss, the picture of a hangman appears.
+khangman: After 10 tries, if the word is not guessed, the game is over and
+khangman: the answer is displayed.
+khangman:
+khangman: For more information, visit:  http://edu.kde.org/
+khangman:
+khangman:
+khangman:
diff --git a/source/kde/slack-desc/kig b/source/kde/slack-desc/kig
new file mode 100644
index 00000000..062fa2b1
--- /dev/null
+++ b/source/kde/slack-desc/kig
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+kig: kig (interactive geometry game)
+kig:
+kig: Kig is an application meant to allow high school students to
+kig: interactively explore mathematical concepts, much like Dr.Geo, KGeo,
+kig: KSeg and Cabri.
+kig:
+kig: For more information, visit:  http://edu.kde.org/kig/
+kig:
+kig:
+kig:
+kig:
diff --git a/source/kde/slack-desc/kimono b/source/kde/slack-desc/kimono
new file mode 100644
index 00000000..76c2f2fe
--- /dev/null
+++ b/source/kde/slack-desc/kimono
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kimono: kimono (C# mono KDE4 bindings)
+kimono:
+kimono: C# Mono KDE 4 language bindings.
+kimono:
+kimono: For more information, visit:  http://www.www.org
+kimono:
+kimono:
+kimono:
+kimono:
+kimono:
+kimono:
diff --git a/source/kde/slack-desc/kipi-plugins b/source/kde/slack-desc/kipi-plugins
new file mode 100644
index 00000000..58fc361e
--- /dev/null
+++ b/source/kde/slack-desc/kipi-plugins
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+kipi-plugins: Kipi Plugins (Plugins for libKipi)
+kipi-plugins:
+kipi-plugins: Kipi Plugins are additional functions for the KDE Images Managment
+kipi-plugins: Host Programs (digiKam, KimDaBa, ShowImg, and Gwenview). They can add
+kipi-plugins: extra menus and shortcuts, and extend the host programs features. You
+kipi-plugins: can install as many or as few as you like, from within host programs.
+kipi-plugins:
+kipi-plugins: Homepage: http://www.kipi-plugins.org/
+kipi-plugins:
+kipi-plugins:
+kipi-plugins:
diff --git a/source/kde/slack-desc/kiten b/source/kde/slack-desc/kiten
new file mode 100644
index 00000000..a2a60f45
--- /dev/null
+++ b/source/kde/slack-desc/kiten
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+kiten: kiten (a tool to learn Japanese)
+kiten:
+kiten: Kiten is a tool to learn Japanese.
+kiten:
+kiten: For more information, visit:  http://edu.kde.org/
+kiten:
+kiten:
+kiten:
+kiten:
+kiten:
+kiten:
diff --git a/source/kde/slack-desc/klettres b/source/kde/slack-desc/klettres
new file mode 100644
index 00000000..d1bb370e
--- /dev/null
+++ b/source/kde/slack-desc/klettres
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+klettres: klettres (language learning program)
+klettres:
+klettres: KLettres aims to help to learn the alphabet and then to read some
+klettres: syllables in different languages.
+klettres: It is meant to help learning the very first sounds of a new language,
+klettres: for children or for adults.
+klettres:
+klettres: For more information, visit:  http://edu.kde.org/klettres
+klettres:
+klettres:
+klettres:
diff --git a/source/kde/slack-desc/kmag b/source/kde/slack-desc/kmag
new file mode 100644
index 00000000..b0548028
--- /dev/null
+++ b/source/kde/slack-desc/kmag
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+kmag: kmag (Screen magnifier)
+kmag:
+kmag: Magnifies a part of your screen.
+kmag:
+kmag: For more information, visit:  http://www.kde.org
+kmag:
+kmag:
+kmag:
+kmag:
+kmag:
+kmag:
diff --git a/source/kde/slack-desc/kmousetool b/source/kde/slack-desc/kmousetool
new file mode 100644
index 00000000..017c312a
--- /dev/null
+++ b/source/kde/slack-desc/kmousetool
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+kmousetool: kmousetool (Automatic mouse clicks)
+kmousetool:
+kmousetool: Clicks the mouse for you, reducing hand strain.
+kmousetool:
+kmousetool: For more information, visit:  http://www.kde.org
+kmousetool:
+kmousetool:
+kmousetool:
+kmousetool:
+kmousetool:
+kmousetool:
diff --git a/source/kde/slack-desc/kmouth b/source/kde/slack-desc/kmouth
new file mode 100644
index 00000000..8bdac0f6
--- /dev/null
+++ b/source/kde/slack-desc/kmouth
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kmouth: kmouth (Speech synthesis frontend)
+kmouth:
+kmouth: The computer "speaks" the entered text for talking with people.
+kmouth:
+kmouth: For more information, visit:  http://www.kde.org
+kmouth:
+kmouth:
+kmouth:
+kmouth:
+kmouth:
+kmouth:
diff --git a/source/kde/slack-desc/kmplot b/source/kde/slack-desc/kmplot
new file mode 100644
index 00000000..91472c51
--- /dev/null
+++ b/source/kde/slack-desc/kmplot
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kmplot: kmplot (a mathematical function plotter)
+kmplot:
+kmplot: KmPlot is a mathematical function plotter for the KDE-Desktop.  
+kmplot: It has a built-in powerful parser. You can plot different functions
+kmplot: simultaneously and combine them into new functions. KmPlot supports
+kmplot: functions with parameters and functions in polar coordinates.
+kmplot: Several grid modes are possible.
+kmplot: Plots may be printed with high precision in correct scale.
+kmplot:
+kmplot: For more information, visit:  http://edu.kde.org/
+kmplot:
diff --git a/source/kde/koffice/slack-desc b/source/kde/slack-desc/koffice
index 6863e914..6863e914 100644
--- a/source/kde/koffice/slack-desc
+++ b/source/kde/slack-desc/koffice
diff --git a/source/kde/slack-desc/kolourpaint b/source/kde/slack-desc/kolourpaint
new file mode 100644
index 00000000..b641cecf
--- /dev/null
+++ b/source/kde/slack-desc/kolourpaint
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kolourpaint: kolourpaint (easy to use paint program)
+kolourpaint:
+kolourpaint: KolourPaint is a easy-to-use paint program for KDE. It aims to be
+kolourpaint: conceptually simply to understand; providing a level of functionality
+kolourpaint: targeted towards the average user. It's designed for tasks like: 
+kolourpaint: * Painting - drawing diagrams and "finger painting".
+kolourpaint: * Image Manipulation - editing screenshots and photos, and
+kolourpaint:   applying effects
+kolourpaint: * Icon Editing - drawing clipart and logos with transparency.
+kolourpaint:
+kolourpaint: For more information, visit:  http://www.kde.org
diff --git a/source/kde/slack-desc/konsole b/source/kde/slack-desc/konsole
new file mode 100644
index 00000000..31cfa2c7
--- /dev/null
+++ b/source/kde/slack-desc/konsole
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler-----------------------------------------------------|
+konsole: konsole (KDE's terminal emulator)
+konsole:
+konsole: Konsole is KDE's terminal emulator.
+konsole:
+konsole: Homepage: http://kde.org
+konsole:
+konsole:
+konsole:
+konsole:
+konsole:
+konsole:
diff --git a/source/kde/kopete-cryptography/slack-desc b/source/kde/slack-desc/kopete-cryptography
index 7529a8b1..7529a8b1 100644
--- a/source/kde/kopete-cryptography/slack-desc
+++ b/source/kde/slack-desc/kopete-cryptography
diff --git a/source/kde/slack-desc/korundum b/source/kde/slack-desc/korundum
new file mode 100644
index 00000000..70abb6ad
--- /dev/null
+++ b/source/kde/slack-desc/korundum
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+korundum: korundum (KDE ruby bindings)
+korundum:
+korundum: Very complete bindings to both the KDE API and the Qt APIs.
+korundum: The Korundum package includes both a QtRuby Qt-only binding along
+korundum: with the full combined Qt/KDE one.
+korundum: The QtRuby package contains just Qt bindings with no dependencies
+korundum: on KDE.
+korundum:
+korundum: For more information, visit:  http://rubyforge.org/projects/korundum/
+korundum:
+korundum:
diff --git a/source/kde/slack-desc/kplayer b/source/kde/slack-desc/kplayer
new file mode 100644
index 00000000..87605b28
--- /dev/null
+++ b/source/kde/slack-desc/kplayer
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+kplayer: kplayer (KDE media player)
+kplayer:
+kplayer: KPlayer is a KDE multimedia player. With KPlayer you can easily play
+kplayer: a wide variety of video and audio files and streams using a rich and
+kplayer: friendly interface that follows KDE standards.
+kplayer: KPlayer will work out of the box if properly installed, and because
+kplayer: it uses MPlayer as the media playing backend, it will play virtually
+kplayer: any file or Internet stream.
+kplayer:
+kplayer: For more information, visit:  http://www.kde.org
+kplayer:
diff --git a/source/kde/slack-desc/kremotecontrol b/source/kde/slack-desc/kremotecontrol
new file mode 100644
index 00000000..4da69dde
--- /dev/null
+++ b/source/kde/slack-desc/kremotecontrol
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkremotecontrols the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kremotecontrol: kremotecontrol (remote control frontend)
+kremotecontrol:
+kremotecontrol: KRemoteControl (formerly known as KDELirc) is a KDE frontend for
+kremotecontrol: your remote controls.
+kremotecontrol:
+kremotecontrol: kremotecontrol's home page is:
+kremotecontrol:   http://utils.kde.org/projects/kremotecontrol
+kremotecontrol:
+kremotecontrol:
+kremotecontrol:
+kremotecontrol:
diff --git a/source/kde/slack-desc/kross-interpreters b/source/kde/slack-desc/kross-interpreters
new file mode 100644
index 00000000..27a15fc9
--- /dev/null
+++ b/source/kde/slack-desc/kross-interpreters
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+kross-interpreters: kross-interpreters (Kross interpreters)
+kross-interpreters:
+kross-interpreters: Set of interpreter plugins for the Kross archtecture in KDE.
+kross-interpreters:
+kross-interpreters: See also:  http://developer.kde.org/language-bindings/
+kross-interpreters:
+kross-interpreters:
+kross-interpreters:
+kross-interpreters:
+kross-interpreters:
+kross-interpreters:
diff --git a/source/kde/slack-desc/kruler b/source/kde/slack-desc/kruler
new file mode 100644
index 00000000..13836670
--- /dev/null
+++ b/source/kde/slack-desc/kruler
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kruler: kruler (a screen ruler for KDE)
+kruler:
+kruler: A screen ruler and color measurement tool for KDE.
+kruler:
+kruler: For more information, visit:  http://www.kde.org
+kruler:
+kruler:
+kruler:
+kruler:
+kruler:
+kruler:
diff --git a/source/kde/slack-desc/ksaneplugin b/source/kde/slack-desc/ksaneplugin
new file mode 100644
index 00000000..410dcfc2
--- /dev/null
+++ b/source/kde/slack-desc/ksaneplugin
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+ksaneplugin: ksaneplugin (scanning plugin using libksane)
+ksaneplugin:
+ksaneplugin: This is a KScan plugin that implements the scanning through libksane.
+ksaneplugin:
+ksaneplugin: For more information, visit:  http://www.kde.org
+ksaneplugin:
+ksaneplugin:
+ksaneplugin:
+ksaneplugin:
+ksaneplugin:
+ksaneplugin:
diff --git a/source/kde/slack-desc/ksecrets b/source/kde/slack-desc/ksecrets
new file mode 100644
index 00000000..40d6564b
--- /dev/null
+++ b/source/kde/slack-desc/ksecrets
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+ksecrets: ksecrets (secrets management infrastructure)
+ksecrets:
+ksecrets: ksecretsservice is a secrets management infrastructure aiming to
+ksecrets: replace kwallet. 
+ksecrets:
+ksecrets: For more information, visit:
+ksecrets:   http://techbase.kde.org/Projects/Utils/ksecretsservice
+ksecrets:
+ksecrets:
+ksecrets:
+ksecrets:
diff --git a/source/kde/slack-desc/ksnapshot b/source/kde/slack-desc/ksnapshot
new file mode 100644
index 00000000..56b278a8
--- /dev/null
+++ b/source/kde/slack-desc/ksnapshot
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+ksnapshot: ksnapshot (screen capture program)
+ksnapshot:
+ksnapshot: A screenshot utility for KDE.
+ksnapshot:
+ksnapshot: For more information, visit:  http://www.kde.org
+ksnapshot:
+ksnapshot:
+ksnapshot:
+ksnapshot:
+ksnapshot:
+ksnapshot:
diff --git a/source/kde/slack-desc/kstars b/source/kde/slack-desc/kstars
new file mode 100644
index 00000000..1e0062c7
--- /dev/null
+++ b/source/kde/slack-desc/kstars
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+kstars: kstars (a desktop planetarium)
+kstars:
+kstars: KStars is a desktop planetarium.
+kstars:
+kstars: For more information, visit:  http://edu.kde.org/
+kstars:
+kstars:
+kstars:
+kstars:
+kstars:
+kstars:
diff --git a/source/kde/slack-desc/ktimer b/source/kde/slack-desc/ktimer
new file mode 100644
index 00000000..45b787c6
--- /dev/null
+++ b/source/kde/slack-desc/ktimer
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mktimers the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+ktimer: ktimer (program scheduler)
+ktimer:
+ktimer: KTimer is a little tool to execute programs after some time.
+ktimer:
+ktimer: ktimer's home page is:  http://utils.kde.org/projects/ktimer
+ktimer:
+ktimer:
+ktimer:
+ktimer:
+ktimer:
+ktimer:
diff --git a/source/kde/slack-desc/ktorrent b/source/kde/slack-desc/ktorrent
new file mode 100644
index 00000000..afb3a203
--- /dev/null
+++ b/source/kde/slack-desc/ktorrent
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+ktorrent: ktorrent (KDE BitTorrent program)
+ktorrent:
+ktorrent: KTorrent is a BitTorrent program with many features:
+ktorrent: Download torrent files (of course :-), upload and download speed
+ktorrent: capping, Internet searching, UDP trackers, port forwarding with UPnP,
+ktorrent: IP blocking, importing of partially or fully downloaded files,
+ktorrent: support for distributed hash tables, protocol encryption,
+ktorrent: bandwidth scheduling, and much more.
+ktorrent:
+ktorrent: KTorrent's developers are Joris Guisson and Ivan Vasic.
+ktorrent:
diff --git a/source/kde/slack-desc/ktouch b/source/kde/slack-desc/ktouch
new file mode 100644
index 00000000..74fdba14
--- /dev/null
+++ b/source/kde/slack-desc/ktouch
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+ktouch: ktouch (touch typing tutor)
+ktouch:
+ktouch: A KDE program that helps you to learn and practice touch typing.
+ktouch:
+ktouch: For more information, visit:  http://edu.kde.org/
+ktouch:
+ktouch:
+ktouch:
+ktouch:
+ktouch:
+ktouch:
diff --git a/source/kde/slack-desc/kturtle b/source/kde/slack-desc/kturtle
new file mode 100644
index 00000000..2fc0d35f
--- /dev/null
+++ b/source/kde/slack-desc/kturtle
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+kturtle: kturtle (Logo programming environment)
+kturtle:
+kturtle: KTurtle is an educational Logo programming environment.
+kturtle:
+kturtle: For more information, visit:  http://edu.kde.org/
+kturtle:
+kturtle:
+kturtle:
+kturtle:
+kturtle:
+kturtle:
diff --git a/source/kde/slack-desc/kwallet b/source/kde/slack-desc/kwallet
new file mode 100644
index 00000000..64fbcf43
--- /dev/null
+++ b/source/kde/slack-desc/kwallet
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mkwallets the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+kwallet: kwallet (KDE wallet manager)
+kwallet:
+kwallet: KDE Wallet Manager is a tool to manage your passwords under KDE.
+kwallet:
+kwallet: kwallet's home page is:
+kwallet:   https://projects.kde.org/projects/kde/kdeutils
+kwallet:
+kwallet:
+kwallet:
+kwallet:
+kwallet:
diff --git a/source/kde/slack-desc/kwebkitpart b/source/kde/slack-desc/kwebkitpart
new file mode 100644
index 00000000..3938c9dd
--- /dev/null
+++ b/source/kde/slack-desc/kwebkitpart
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler-----------------------------------------------------|
+kwebkitpart: kwebkitpart (WebKit browser component)
+kwebkitpart:
+kwebkitpart: KWebKitPart is a web browser component for KDE based on (Qt)WebKit.
+kwebkitpart: You can use it for example for browsing the web in Konqueror.
+kwebkitpart:
+kwebkitpart: Homepage:  http://kde-apps.org/content/show.php?content=127960
+kwebkitpart:
+kwebkitpart:
+kwebkitpart:
+kwebkitpart:
+kwebkitpart:
diff --git a/source/kde/slack-desc/kwordquiz b/source/kde/slack-desc/kwordquiz
new file mode 100644
index 00000000..629395f5
--- /dev/null
+++ b/source/kde/slack-desc/kwordquiz
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+kwordquiz: kwordquiz (a general purpose flash card program)
+kwordquiz:
+kwordquiz: KWordQuiz is a general purpose flash card program.
+kwordquiz: It can be used for vocabulary learning and many other subjects.
+kwordquiz:
+kwordquiz: For more information, visit:  http://edu.kde.org/
+kwordquiz:
+kwordquiz:
+kwordquiz:
+kwordquiz:
+kwordquiz:
diff --git a/source/kde/slack-desc/libkdcraw b/source/kde/slack-desc/libkdcraw
new file mode 100644
index 00000000..4cf8dee5
--- /dev/null
+++ b/source/kde/slack-desc/libkdcraw
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+libkdcraw: libkdcraw (library wrapper around dcraw)
+libkdcraw:
+libkdcraw: Libkdcraw is a C++ interface around the dcraw binary program, used
+libkdcraw: to decode RAW picture files.
+libkdcraw:
+libkdcraw: For more information, visit:  http://www.kipi-plugins.org/
+libkdcraw:
+libkdcraw:
+libkdcraw:
+libkdcraw:
+libkdcraw:
diff --git a/source/kde/slack-desc/libkdeedu b/source/kde/slack-desc/libkdeedu
new file mode 100644
index 00000000..ab58c79c
--- /dev/null
+++ b/source/kde/slack-desc/libkdeedu
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+libkdeedu: libkdeedu (Educational applications)
+libkdeedu:
+libkdeedu: Educational applications for the KDE Software Compilation.
+libkdeedu:
+libkdeedu:
+libkdeedu:
+libkdeedu:
+libkdeedu:
+libkdeedu:
+libkdeedu:
+libkdeedu:
diff --git a/source/kde/slack-desc/libkexiv2 b/source/kde/slack-desc/libkexiv2
new file mode 100644
index 00000000..7a206190
--- /dev/null
+++ b/source/kde/slack-desc/libkexiv2
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+libkexiv2: libkexiv2 (wrapper library for exiv2 library)
+libkexiv2:
+libkexiv2: Libkexiv2 is a KDE wrapper around the Exiv2 library to manipulate
+libkexiv2: pictures' metadata.
+libkexiv2:
+libkexiv2: For more information, visit:  http://www.kipi-plugins.org/
+libkexiv2:
+libkexiv2:
+libkexiv2:
+libkexiv2:
+libkexiv2:
diff --git a/source/kde/slack-desc/libkipi b/source/kde/slack-desc/libkipi
new file mode 100644
index 00000000..c1098f91
--- /dev/null
+++ b/source/kde/slack-desc/libkipi
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+libkipi: libKipi (KDE Image Plugin Interface)
+libkipi:
+libkipi: This package provides a generic KDE Image Plug-in Interface used by
+libkipi: some KDE image applications.
+libkipi: Plug-ins for this interface are in the kipi-plugins package.
+libkipi:
+libkipi: For more info, visit:  http://www.kipi-plugins.org/
+libkipi:
+libkipi:
+libkipi:
+libkipi:
diff --git a/source/kde/slack-desc/libksane b/source/kde/slack-desc/libksane
new file mode 100644
index 00000000..2146c3c0
--- /dev/null
+++ b/source/kde/slack-desc/libksane
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+libksane: libksane (KDE scan support interface)
+libksane:
+libksane: Libksane is a library to add scan support to KDE applications.
+libksane:
+libksane: For more information, visit:  http://www.kde.org
+libksane:
+libksane:
+libksane:
+libksane:
+libksane:
+libksane:
diff --git a/source/kde/slack-desc/libktorrent b/source/kde/slack-desc/libktorrent
new file mode 100644
index 00000000..5bc41f88
--- /dev/null
+++ b/source/kde/slack-desc/libktorrent
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+libktorrent: libktorrent (Protocol library for the KDE BitTorrent program)
+libktorrent:
+libktorrent: Libktorrent is the BitTorrent protocol library for ktorrent, which
+libktorrent: contains all the torrent downloading code.  Although it is closely
+libktorrent: to ktorrent, the goal is to make libktorrent an independent
+libktorrent: library which can be used by other applications.
+libktorrent:
+libktorrent: Homepage:  http://ktorrent.org
+libktorrent:
+libktorrent:
+libktorrent:
diff --git a/source/kde/slack-desc/marble b/source/kde/slack-desc/marble
new file mode 100644
index 00000000..06e3e8ef
--- /dev/null
+++ b/source/kde/slack-desc/marble
@@ -0,0 +1,20 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+marble: marble (virtual globe)
+marble:
+marble: Marble is a virtual globe with advanced routing capabilities.  You can
+marble: download maps from a variety of themes and explore the surroundings.
+marble: Record your trip and share it with your friends.
+marble: Features:  online and offline routing, GPS tracking and recording,
+marble: themable maps (OpenStreetMap, Satellite Map and more), support for
+marble: different projections (globe, flat map, ...) and other planets,
+marble: download of maps and route data for offline usage.
+marble:
+marble: For more information, visit:  http://edu.kde.org/
+
diff --git a/source/kde/slack-desc/networkmanagement b/source/kde/slack-desc/networkmanagement
new file mode 100644
index 00000000..1c2ddcb3
--- /dev/null
+++ b/source/kde/slack-desc/networkmanagement
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+networkmanagement: networkmanagement (KDE network control panel and widget)
+networkmanagement:
+networkmanagement: KDE network control panel and widget.
+networkmanagement:
+networkmanagement: For more information, visit:
+networkmanagement:   http://userbase.kde.org/NetworkManagement
+networkmanagement:
+networkmanagement:
+networkmanagement:
+networkmanagement:
+networkmanagement:
diff --git a/source/kde/slack-desc/okular b/source/kde/slack-desc/okular
new file mode 100644
index 00000000..333d94ff
--- /dev/null
+++ b/source/kde/slack-desc/okular
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+okular: okular (a document viewer)
+okular:
+okular: Okular is a document viewer for KDE.
+okular:
+okular: For more information, visit:  http://www.kde.org
+okular:
+okular:
+okular:
+okular:
+okular:
+okular:
diff --git a/source/kde/slack-desc/oxygen-gtk2 b/source/kde/slack-desc/oxygen-gtk2
new file mode 100644
index 00000000..9398d8d4
--- /dev/null
+++ b/source/kde/slack-desc/oxygen-gtk2
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+oxygen-gtk2: oxygen-gtk2 (Oxygen GTK+ engine)
+oxygen-gtk2:
+oxygen-gtk2: Oxygen-Gtk2 is a port of the KDE widget theme Oxygen, to GTK+.
+oxygen-gtk2: It's primary goal is to ensure visual consistency between GTK+ and
+oxygen-gtk2: qt-based applications running under kde. A secondary objective is
+oxygen-gtk2: to also have a stand-alone nice looking GTK+ theme that would behave
+oxygen-gtk2: well on other Desktop Environments.
+oxygen-gtk2: Unlike other attempts made to port the kde oxygen theme to GTK+, this
+oxygen-gtk2: attempt does not depend on Qt.
+oxygen-gtk2:
+oxygen-gtk2: See: http://projects.kde.org/projects/playground/artwork/oxygen-gtk
diff --git a/source/kde/slack-desc/oxygen-icons b/source/kde/slack-desc/oxygen-icons
new file mode 100644
index 00000000..85a5e45f
--- /dev/null
+++ b/source/kde/slack-desc/oxygen-icons
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+oxygen-icons: oxygen-icons (Oxygen theme for the KDE Plasma Desktop)
+oxygen-icons:
+oxygen-icons: Oxygen provides a complete and modern icon theme for KDE.
+oxygen-icons:
+oxygen-icons: Visit the Oxygen project online:  http://www.oxygen-icons.org
+oxygen-icons:
+oxygen-icons:
+oxygen-icons:
+oxygen-icons:
+oxygen-icons:
+oxygen-icons:
diff --git a/source/kde/slack-desc/parley b/source/kde/slack-desc/parley
new file mode 100644
index 00000000..c4c08e98
--- /dev/null
+++ b/source/kde/slack-desc/parley
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+parley: parley (vocabulary trainer)
+parley:
+parley: Parley is a vocabulary trainer for KDE.
+parley:
+parley: For more information, visit:  http://edu.kde.org/
+parley:
+parley:
+parley:
+parley:
+parley:
+parley:
diff --git a/source/kde/slack-desc/perlkde b/source/kde/slack-desc/perlkde
new file mode 100644
index 00000000..2857717c
--- /dev/null
+++ b/source/kde/slack-desc/perlkde
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+perlkde: perlkde (perl bindings for KDE)
+perlkde:
+perlkde: Perl bindings for KDE.
+perlkde:
+perlkde: For more information, visit:  http://www.kde.org
+perlkde:
+perlkde:
+perlkde:
+perlkde:
+perlkde:
+perlkde:
diff --git a/source/kde/slack-desc/perlqt b/source/kde/slack-desc/perlqt
new file mode 100644
index 00000000..30233481
--- /dev/null
+++ b/source/kde/slack-desc/perlqt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+perlqt: perlqt (Perl OO interface to Qt)
+perlqt:
+perlqt: A Perl Object Oriented interface to the Qt GUI Toolkit.
+perlqt: Access to the KDE Desktop Environment libraries is planned as well.
+perlqt:
+perlqt: For more information, visit:  http://perlqt.sourceforge.net
+perlqt:
+perlqt:
+perlqt:
+perlqt:
+perlqt:
diff --git a/source/kde/slack-desc/polkit-kde-agent-1 b/source/kde/slack-desc/polkit-kde-agent-1
new file mode 100644
index 00000000..a1e0077d
--- /dev/null
+++ b/source/kde/slack-desc/polkit-kde-agent-1
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                  |-----handy-ruler-----------------------------------------------------|
+polkit-kde-agent-1: polkit-kde-agent-1 (KDE polkit authenticator)
+polkit-kde-agent-1:
+polkit-kde-agent-1: This is a polkit authenticator for KDE.
+polkit-kde-agent-1: 
+polkit-kde-agent-1: 
+polkit-kde-agent-1: 
+polkit-kde-agent-1: 
+polkit-kde-agent-1:
+polkit-kde-agent-1: 
+polkit-kde-agent-1:
+polkit-kde-agent-1:
diff --git a/source/kde/slack-desc/polkit-kde-kcmodules-1 b/source/kde/slack-desc/polkit-kde-kcmodules-1
new file mode 100644
index 00000000..a31ed037
--- /dev/null
+++ b/source/kde/slack-desc/polkit-kde-kcmodules-1
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                      |-----handy-ruler-----------------------------------------------------|
+polkit-kde-kcmodules-1: polkit-kde-kcmodules-1 (KDE polkit kcmodules)
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1: This package contains the kcm_polkit modules for KDE.
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
+polkit-kde-kcmodules-1:
diff --git a/source/kde/slack-desc/polkit-qt-1 b/source/kde/slack-desc/polkit-qt-1
new file mode 100644
index 00000000..ed2cf40c
--- /dev/null
+++ b/source/kde/slack-desc/polkit-qt-1
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler-----------------------------------------------------|
+polkit-qt-1: polkit-qt-1 (Qt polkit API wrapper)
+polkit-qt-1:
+polkit-qt-1: polkit-qt-1 aims to make it easy for Qt developers to take advantage
+polkit-qt-1: of the polkit API.  It is a convenience wrapper around QAction and
+polkit-qt-1: QAbstractButton that lets you integrate those two components
+polkit-qt-1: easily with polkit.
+polkit-qt-1:
+polkit-qt-1: Homepage: http://techbase.kde.org/Polkit-Qt-1
+polkit-qt-1:
+polkit-qt-1:
+polkit-qt-1:
diff --git a/source/kde/slack-desc/printer-applet b/source/kde/slack-desc/printer-applet
new file mode 100644
index 00000000..f2dd2632
--- /dev/null
+++ b/source/kde/slack-desc/printer-applet
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side mprinter-applets the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+printer-applet: printer-applet (printer applet)
+printer-applet:
+printer-applet: Printer Applet is a system tray utility that shows current print
+printer-applet: jobs, printer warnings, and errors.
+printer-applet:
+printer-applet: Homepage:  http://utils.kde.org/projects/printer-applet
+printer-applet:
+printer-applet:
+printer-applet:
+printer-applet:
+printer-applet:
diff --git a/source/kde/slack-desc/prison b/source/kde/slack-desc/prison
new file mode 100644
index 00000000..aa990092
--- /dev/null
+++ b/source/kde/slack-desc/prison
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-----------------------------------------------------|
+prison: prison (Qt based Barcode API)
+prison:
+prison: Prison is a barcode API currently offering a Qt API to produce 
+prison: QRCode barcodes and DotMatrix barcodes. 
+prison:
+prison: git clone git://anongit.kde.org/prison
+prison:
+prison:
+prison:
+prison:
+prison:
diff --git a/source/kde/slack-desc/pykde4 b/source/kde/slack-desc/pykde4
new file mode 100644
index 00000000..65fe3a17
--- /dev/null
+++ b/source/kde/slack-desc/pykde4
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+pykde4: pykde4 (Python bindings for KDE4)
+pykde4:
+pykde4: Python bindings for KDE4.
+pykde4:
+pykde4: For more information, visit:  http://www.kde.org
+pykde4:
+pykde4:
+pykde4:
+pykde4:
+pykde4:
+pykde4:
diff --git a/source/kde/slack-desc/qtruby b/source/kde/slack-desc/qtruby
new file mode 100644
index 00000000..9f02b062
--- /dev/null
+++ b/source/kde/slack-desc/qtruby
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+qtruby: qtruby (Qt bindings for ruby)
+qtruby:
+qtruby: QtRuby is part of Korundum, very complete bindings to both the KDE
+qtruby: API and the Qt APIs. The Korundum package includes both a QtRuby
+qtruby: Qt-only binding along with the full combined Qt/KDE one.
+qtruby: The QtRuby package contains just Qt bindings, with no dependency
+qtruby: on KDE.
+qtruby:
+qtruby: For more information, see:  http://rubyforge.org/projects/korundum/
+qtruby:
+qtruby:
diff --git a/source/kde/slack-desc/quanta b/source/kde/slack-desc/quanta
new file mode 100644
index 00000000..af1cadfe
--- /dev/null
+++ b/source/kde/slack-desc/quanta
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+quanta: quanta (Quanta Plus web development environment)
+quanta:
+quanta: Quanta Plus is a web development environment for HTML and associate
+quanta: languages.  It is designed for quick web development.
+quanta: Quanta Plus includes the ability to run a debugger.
+quanta:
+quanta: Project page:
+quanta:   https://projects.kde.org/projects/playground/devtools/quanta
+quanta:
+quanta:
+quanta:
diff --git a/source/kde/slack-desc/qyoto b/source/kde/slack-desc/qyoto
new file mode 100644
index 00000000..9ca953ee
--- /dev/null
+++ b/source/kde/slack-desc/qyoto
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+qyoto: qyoto (C# Mono Qt4 bindings)
+qyoto:
+qyoto: C# Mono Qt 4 language bindings.
+qyoto:
+qyoto: For more information, visit:  http://www.www.org
+qyoto:
+qyoto:
+qyoto:
+qyoto:
+qyoto:
+qyoto:
diff --git a/source/kde/slack-desc/rocs b/source/kde/slack-desc/rocs
new file mode 100644
index 00000000..8ba31c9c
--- /dev/null
+++ b/source/kde/slack-desc/rocs
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+rocs: rocs (graph theory IDE)
+rocs:
+rocs: Rocs is a Graph Theory IDE for professors and students.
+rocs:
+rocs: For more information, visit:  http://edu.kde.org/
+rocs:
+rocs:
+rocs:
+rocs:
+rocs:
+rocs:
diff --git a/source/kde/skanlite/slack-desc b/source/kde/slack-desc/skanlite
index b4e994da..b4e994da 100644
--- a/source/kde/skanlite/slack-desc
+++ b/source/kde/slack-desc/skanlite
diff --git a/source/kde/slack-desc/smokegen b/source/kde/slack-desc/smokegen
new file mode 100644
index 00000000..17142b46
--- /dev/null
+++ b/source/kde/slack-desc/smokegen
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+smokegen: smokegen (smoke generator)
+smokegen:
+smokegen: Smoke Generator.  The main purpose of SMOKE is making it easier to
+smokegen: write bindings from scripting languages to Qt and KDE - with an
+smokegen: emphasis on ease of use and flexibility.
+smokegen:
+smokegen: For more information, visit:  http://www.kde.org
+smokegen:
+smokegen:
+smokegen:
+smokegen:
diff --git a/source/kde/slack-desc/smokekde b/source/kde/slack-desc/smokekde
new file mode 100644
index 00000000..8fee37aa
--- /dev/null
+++ b/source/kde/slack-desc/smokekde
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+smokekde: smokekde (smoke-kde library)
+smokekde:
+smokekde: Smoke generator.
+smokekde:
+smokekde: For more information, visit:  http://www.kde.org
+smokekde:
+smokekde:
+smokekde:
+smokekde:
+smokekde:
+smokekde:
diff --git a/source/kde/slack-desc/smokeqt b/source/kde/slack-desc/smokeqt
new file mode 100644
index 00000000..dfac28cd
--- /dev/null
+++ b/source/kde/slack-desc/smokeqt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+smokeqt: smokeqt (bindings for Qt libraries)
+smokeqt:
+smokeqt: This package includes bindings for Qt libraries.
+smokeqt:
+smokeqt: For more information, visit:  http://www.kde.org
+smokeqt:
+smokeqt:
+smokeqt:
+smokeqt:
+smokeqt:
+smokeqt:
diff --git a/source/kde/slack-desc/step b/source/kde/slack-desc/step
new file mode 100644
index 00000000..6b3c8bf2
--- /dev/null
+++ b/source/kde/slack-desc/step
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+step: step (interactive physics simulator)
+step:
+step: Step is an interactive physical simulator.
+step: It works like this: you place some bodies on the scene, add some
+step: forces such as gravity or springs, then click "Simulate" and Step
+step: shows you how your scene will evolve according to the laws of physics.
+step: With Step you can not only learn but feel how physics works !
+step:
+step: For more information, visit:  http://edu.kde.org/
+step:
+step:
diff --git a/source/kde/slack-desc/strigi b/source/kde/slack-desc/strigi
new file mode 100644
index 00000000..16dda7ee
--- /dev/null
+++ b/source/kde/slack-desc/strigi
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-----------------------------------------------------|
+strigi: strigi (fast and light desktop search engine)
+strigi:
+strigi: Strigi is a fast and light desktop search engine.  It can handle a 
+strigi: large range of file formats such as emails, office documents, media
+strigi: files, and file archives.  It can index files that are embedded in 
+strigi: other files.  This means email attachments and files in zip files
+strigi: are searchable as if they were normal files on your harddisk. 
+strigi:
+strigi: Homepage:  http://strigi.sourceforge.net/
+strigi:
+strigi:
diff --git a/source/kde/slack-desc/superkaramba b/source/kde/slack-desc/superkaramba
new file mode 100644
index 00000000..535e35eb
--- /dev/null
+++ b/source/kde/slack-desc/superkaramba
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side msuperkarambas the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+superkaramba: superkaramba (interactive widget manager)
+superkaramba:
+superkaramba: SuperKaramba is a tool that allows you to easily create
+superkaramba: interactive widgets on your KDE desktop.
+superkaramba:
+superkaramba: Home page:  https://projects.kde.org/projects/kde/kdeutils/
+superkaramba:
+superkaramba:
+superkaramba:
+superkaramba:
+superkaramba:
diff --git a/source/kde/slack-desc/svgpart b/source/kde/slack-desc/svgpart
new file mode 100644
index 00000000..dbee48b0
--- /dev/null
+++ b/source/kde/slack-desc/svgpart
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+svgpart: svgpart (SVG plugin for KDE)
+svgpart:
+svgpart: KPart for viewing SVG files in KDE.
+svgpart:
+svgpart: For more information, visit:  http://www.kde.org
+svgpart:
+svgpart:
+svgpart:
+svgpart:
+svgpart:
+svgpart:
diff --git a/source/kde/slack-desc/sweeper b/source/kde/slack-desc/sweeper
new file mode 100644
index 00000000..b0ae9f37
--- /dev/null
+++ b/source/kde/slack-desc/sweeper
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side msweepers the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+sweeper: sweeper (remove traces of your activities)
+sweeper:
+sweeper: Sweeper helps to clean unwanted traces the user leaves on the system.
+sweeper:
+sweeper: Home page:  https://projects.kde.org/projects/kde/kdeutils/sweeper
+sweeper:
+sweeper:
+sweeper:
+sweeper:
+sweeper:
+sweeper:
diff --git a/source/kde/slack-desc/wicd-kde b/source/kde/slack-desc/wicd-kde
new file mode 100644
index 00000000..8c0e87d9
--- /dev/null
+++ b/source/kde/slack-desc/wicd-kde
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+wicd-kde: wicd-kde (Wicd client built on the KDE Development Platform)
+wicd-kde:
+wicd-kde: A Wicd client built on the KDE Development Platform.
+wicd-kde:
+wicd-kde: For more information, visit:
+wicd-kde:   https://projects.kde.org/projects/extragear/network/wicd-kde
+wicd-kde:
+wicd-kde:
+wicd-kde:
+wicd-kde:
+wicd-kde:
diff --git a/source/kdei/calligra-l10n/calligra-l10n.SlackBuild b/source/kdei/calligra-l10n/calligra-l10n.SlackBuild
new file mode 100755
index 00000000..169ed26b
--- /dev/null
+++ b/source/kdei/calligra-l10n/calligra-l10n.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/sh
+
+# Copyright 2008  Robby Workman  Northport, AL, USA
+# Copyright 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#  This script should build any of the language packs if run with (for example):
+#    PKGLANG=de ./calligra-l10n.SlackBuild
+#  You should be able to build all of them with something like this:
+#    for i in $(cat languages) ; do PKGLANG=$i ./calligra-l10n.SlackBuild ; done
+# If ./languages is missing and this script is called without options, the
+# default is to create an up-to-date ./languages list and build all the
+# language packs.
+
+if [ ! -r ./languages ]; then
+  for file in calligra-l10n*.xz ; do
+    echo $file | cut -f 3 -d - >> ./languages
+  done
+fi
+
+[ -z $VERSION ] && export VERSION=2.4.3
+[ -z $ARCH ] && export ARCH=noarch
+[ -z $BUILD ] && export BUILD=1
+
+# Use this as CFLAGS and CXXFLAGS:
+if [ -z "$SLKCFLAGS" ]; then
+  if [ "$ARCH" = "i486" ]; then
+    export SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  elif [ "$ARCH" = "s390" ]; then
+    export SLKCFLAGS="-O2"
+  elif [ "$ARCH" = "x86_64" ]; then
+    export SLKCFLAGS="-O2 -fPIC"
+  elif [ "$ARCH" = "armv7hl" ]; then
+    export SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  fi
+fi
+
+# Get the kde environment variables
+[ -d kdebase ] && . ./kdebase/profile.d/kde.sh
+
+# Set the config option variables if they are not already set:
+[ -r ../KDE.options ] && . ../KDE.options
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+make_language_pack() {
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION 
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+  make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+mkdir -p $PKG/install
+cat $CWD/slack-desc/slack-desc.calligra-l10n-$PKGLANG > $PKG/install/slack-desc
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+}
+
+if [ -z $PKGLANG ]; then
+  for PKGLANG in $(cat languages) ; do
+    PKGNAM=calligra-l10n-$PKGLANG
+    PKG=$TMP/package-calligra-l10n-$PKGLANG
+    # The global options may be overridden here (if needed):
+    [ -r ./local.options/$PKGLANG ] && . ./local.options/$PKGLANG
+    make_language_pack;
+  done
+else
+  PKGNAM=calligra-l10n-$PKGLANG
+  PKG=$TMP/package-calligra-l10n-$PKGLANG
+  # The global options may be overridden here (if needed):
+  [ -r ./local.options/$PKGLANG ] && . ./local.options/$PKGLANG
+  make_language_pack;
+fi
+
diff --git a/source/kdei/calligra-l10n/languages b/source/kdei/calligra-l10n/languages
new file mode 100644
index 00000000..cfdbddc8
--- /dev/null
+++ b/source/kdei/calligra-l10n/languages
@@ -0,0 +1,26 @@
+ca
+ca@valencia
+cs
+da
+de
+el
+en_GB
+es
+et
+fi
+fr
+hu
+it
+kk
+nb
+nds
+nl
+pl
+pt
+pt_BR
+ru
+sk
+sv
+uk
+zh_CN
+zh_TW
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-af b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-af
new file mode 100644
index 00000000..b0f94367
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-af
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-af: calligra-l10n-af
+calligra-l10n-af:
+calligra-l10n-af: Afrikaans language support for Calligra.
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
+calligra-l10n-af:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ar b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ar
new file mode 100644
index 00000000..5c495d63
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ar
@@ -0,0 +1,11 @@
+calligra-l10n-ar: calligra-l10n-ar
+calligra-l10n-ar:
+calligra-l10n-ar: Arabic language support for Calligra.
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
+calligra-l10n-ar:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-az b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-az
new file mode 100644
index 00000000..0eba46b4
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-az
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-az: calligra-l10n-az
+calligra-l10n-az:
+calligra-l10n-az: Azerbaijani language support for Calligra.
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
+calligra-l10n-az:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bg b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bg
new file mode 100644
index 00000000..0cc4dbc9
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bg
@@ -0,0 +1,11 @@
+calligra-l10n-bg: calligra-l10n-bg
+calligra-l10n-bg:
+calligra-l10n-bg: Bulgarian language support for Calligra.
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
+calligra-l10n-bg:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-br b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-br
new file mode 100644
index 00000000..0db9564d
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-br
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-br: calligra-l10n-br
+calligra-l10n-br:
+calligra-l10n-br: Breton language support for Calligra.
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
+calligra-l10n-br:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bs b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bs
new file mode 100644
index 00000000..8a82e9ba
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-bs
@@ -0,0 +1,11 @@
+calligra-l10n-bs: calligra-l10n-bs
+calligra-l10n-bs:
+calligra-l10n-bs: Bosnian language support for Calligra.
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
+calligra-l10n-bs:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca
new file mode 100644
index 00000000..27a7e3e1
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca
@@ -0,0 +1,11 @@
+calligra-l10n-ca: calligra-l10n-ca
+calligra-l10n-ca:
+calligra-l10n-ca: Catalan language support for Calligra.
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
+calligra-l10n-ca:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca@valencia b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca@valencia
new file mode 100644
index 00000000..fb759930
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ca@valencia
@@ -0,0 +1,11 @@
+calligra-l10n-ca@valencia: calligra-l10n-ca@valencia
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia: Valencian (southern Catalan) language support for Calligra.
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
+calligra-l10n-ca@valencia:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cs b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cs
new file mode 100644
index 00000000..87bc7d82
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cs
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-cs: calligra-l10n-cs
+calligra-l10n-cs:
+calligra-l10n-cs: Czech language support for Calligra.
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
+calligra-l10n-cs:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cy b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cy
new file mode 100644
index 00000000..f25b96ba
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-cy
@@ -0,0 +1,11 @@
+calligra-l10n-cy: calligra-l10n-cy
+calligra-l10n-cy:
+calligra-l10n-cy: Welsh language support for Calligra.
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
+calligra-l10n-cy:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-da b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-da
new file mode 100644
index 00000000..6b907996
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-da
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-da: calligra-l10n-da
+calligra-l10n-da:
+calligra-l10n-da: Danish language support for Calligra.
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
+calligra-l10n-da:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-de b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-de
new file mode 100644
index 00000000..ff79d909
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-de
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-de: calligra-l10n-de
+calligra-l10n-de:
+calligra-l10n-de: German language support for Calligra.
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
+calligra-l10n-de:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-el b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-el
new file mode 100644
index 00000000..80c52631
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-el
@@ -0,0 +1,11 @@
+calligra-l10n-el: calligra-l10n-el
+calligra-l10n-el:
+calligra-l10n-el: Greek language support for Calligra.
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
+calligra-l10n-el:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-en_GB b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-en_GB
new file mode 100644
index 00000000..9e39b8bf
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-en_GB
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+calligra-l10n-en_GB: calligra-l10n-en_GB
+calligra-l10n-en_GB:
+calligra-l10n-en_GB: English (UK) language support for Calligra.
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
+calligra-l10n-en_GB:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eo b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eo
new file mode 100644
index 00000000..4e6932ff
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eo
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-eo: calligra-l10n-eo
+calligra-l10n-eo:
+calligra-l10n-eo: Esperanto language support for Calligra.
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
+calligra-l10n-eo:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-es b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-es
new file mode 100644
index 00000000..5f4916db
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-es
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-es: calligra-l10n-es
+calligra-l10n-es:
+calligra-l10n-es: Spanish language support for Calligra.
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
+calligra-l10n-es:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-et b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-et
new file mode 100644
index 00000000..48a6ec9b
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-et
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-et: calligra-l10n-et
+calligra-l10n-et:
+calligra-l10n-et: Estonian language support for Calligra.
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
+calligra-l10n-et:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eu b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eu
new file mode 100644
index 00000000..917ebf85
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-eu
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makeu it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lineu for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-eu: calligra-l10n-eu
+calligra-l10n-eu:
+calligra-l10n-eu: Basque language support for Calligra.
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
+calligra-l10n-eu:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fa b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fa
new file mode 100644
index 00000000..5f405c67
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fa
@@ -0,0 +1,11 @@
+calligra-l10n-fa: calligra-l10n-fa
+calligra-l10n-fa:
+calligra-l10n-fa: Persian (Farsi) language support for Calligra.
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
+calligra-l10n-fa:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fi b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fi
new file mode 100644
index 00000000..c76ff512
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fi
@@ -0,0 +1,11 @@
+calligra-l10n-fi: calligra-l10n-fi
+calligra-l10n-fi:
+calligra-l10n-fi: Finnish language support for Calligra.
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
+calligra-l10n-fi:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fr b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fr
new file mode 100644
index 00000000..addbe7dd
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fr
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-fr: calligra-l10n-fr
+calligra-l10n-fr:
+calligra-l10n-fr: French language support for Calligra.
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
+calligra-l10n-fr:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fy b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fy
new file mode 100644
index 00000000..9e45f731
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-fy
@@ -0,0 +1,11 @@
+calligra-l10n-fy: calligra-l10n-fy
+calligra-l10n-fy:
+calligra-l10n-fy: Abkhasysk language support for Calligra.
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
+calligra-l10n-fy:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ga b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ga
new file mode 100644
index 00000000..a73833e0
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ga
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makeu it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lineu for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ga: calligra-l10n-ga
+calligra-l10n-ga:
+calligra-l10n-ga: Irish Gaelic language support for Calligra.
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
+calligra-l10n-ga:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-gl b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-gl
new file mode 100644
index 00000000..a8cbccb4
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-gl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-gl: calligra-l10n-gl
+calligra-l10n-gl:
+calligra-l10n-gl: Galician language support for Calligra.
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
+calligra-l10n-gl:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-he b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-he
new file mode 100644
index 00000000..6c257aa2
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-he
@@ -0,0 +1,11 @@
+calligra-l10n-he: calligra-l10n-he
+calligra-l10n-he:
+calligra-l10n-he: Hebrew language support for Calligra.
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
+calligra-l10n-he:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hi b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hi
new file mode 100644
index 00000000..6ce17597
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hi
@@ -0,0 +1,11 @@
+calligra-l10n-hi: calligra-l10n-hi
+calligra-l10n-hi:
+calligra-l10n-hi: Hindi language support for Calligra.
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
+calligra-l10n-hi:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hne b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hne
new file mode 100644
index 00000000..b96f0ffd
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hne
@@ -0,0 +1,11 @@
+calligra-l10n-hne: calligra-l10n-hne
+calligra-l10n-hne:
+calligra-l10n-hne: Chhattisgarhi language support for Calligra.
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
+calligra-l10n-hne:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hsb b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hsb
new file mode 100644
index 00000000..96d4485d
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hsb
@@ -0,0 +1,11 @@
+calligra-l10n-hsb: calligra-l10n-hsb
+calligra-l10n-hsb:
+calligra-l10n-hsb: Upper Sorbian language support for Calligra.
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
+calligra-l10n-hsb:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hu b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hu
new file mode 100644
index 00000000..19869b99
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-hu
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-hu: calligra-l10n-hu
+calligra-l10n-hu:
+calligra-l10n-hu: Hungarian language support for Calligra.
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
+calligra-l10n-hu:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-is b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-is
new file mode 100644
index 00000000..d664207c
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-is
@@ -0,0 +1,11 @@
+calligra-l10n-is: calligra-l10n-is
+calligra-l10n-is:
+calligra-l10n-is: Icelandic language support for Calligra.
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
+calligra-l10n-is:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-it b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-it
new file mode 100644
index 00000000..43bf529f
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-it
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-it: calligra-l10n-it
+calligra-l10n-it:
+calligra-l10n-it: Italian language support for Calligra.
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
+calligra-l10n-it:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ja b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ja
new file mode 100644
index 00000000..782d09d8
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ja
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ja: calligra-l10n-ja
+calligra-l10n-ja:
+calligra-l10n-ja: Japanese language support for Calligra.
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
+calligra-l10n-ja:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-kk b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-kk
new file mode 100644
index 00000000..071a9a74
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-kk
@@ -0,0 +1,11 @@
+calligra-l10n-kk: calligra-l10n-kk
+calligra-l10n-kk:
+calligra-l10n-kk: Kazakh language support for Calligra.
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
+calligra-l10n-kk:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-km b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-km
new file mode 100644
index 00000000..8613ad66
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-km
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-km: calligra-l10n-km
+calligra-l10n-km:
+calligra-l10n-km: Khmer language support for Calligra.
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
+calligra-l10n-km:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lo b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lo
new file mode 100644
index 00000000..8de6a26a
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lo
@@ -0,0 +1,11 @@
+calligra-l10n-lo: calligra-l10n-lo
+calligra-l10n-lo:
+calligra-l10n-lo: Lao language support for Calligra.
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
+calligra-l10n-lo:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lt b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lt
new file mode 100644
index 00000000..470dee64
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-lt: calligra-l10n-lt
+calligra-l10n-lt:
+calligra-l10n-lt: Lithuanian language support for Calligra.
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
+calligra-l10n-lt:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lv b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lv
new file mode 100644
index 00000000..07da0e2a
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-lv
@@ -0,0 +1,11 @@
+calligra-l10n-lv: calligra-l10n-lv
+calligra-l10n-lv:
+calligra-l10n-lv: Latvian language support for Calligra.
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
+calligra-l10n-lv:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mk b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mk
new file mode 100644
index 00000000..bf683ac3
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mk
@@ -0,0 +1,11 @@
+calligra-l10n-mk: calligra-l10n-mk
+calligra-l10n-mk:
+calligra-l10n-mk: Macedonian language support for Calligra.
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
+calligra-l10n-mk:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ms b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ms
new file mode 100644
index 00000000..526a2bd5
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ms
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ms: calligra-l10n-ms
+calligra-l10n-ms:
+calligra-l10n-ms: Malay language support for Calligra.
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
+calligra-l10n-ms:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mt b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mt
new file mode 100644
index 00000000..d67b36e7
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-mt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-mt: calligra-l10n-mt
+calligra-l10n-mt:
+calligra-l10n-mt: Maltese language support for Calligra.
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
+calligra-l10n-mt:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nb b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nb
new file mode 100644
index 00000000..5fa9358d
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nb
@@ -0,0 +1,11 @@
+calligra-l10n-nb: calligra-l10n-nb
+calligra-l10n-nb:
+calligra-l10n-nb: Norwegian (Bokmaal) language support for Calligra.
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
+calligra-l10n-nb:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nds b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nds
new file mode 100644
index 00000000..e78a7dde
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nds
@@ -0,0 +1,11 @@
+calligra-l10n-nds: calligra-l10n-nds
+calligra-l10n-nds:
+calligra-l10n-nds: Low Saxon language support for Calligra.
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
+calligra-l10n-nds:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ne b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ne
new file mode 100644
index 00000000..61ed8090
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ne
@@ -0,0 +1,11 @@
+calligra-l10n-ne: calligra-l10n-ne
+calligra-l10n-ne:
+calligra-l10n-ne: Nepali language support for Calligra.
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
+calligra-l10n-ne:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nl b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nl
new file mode 100644
index 00000000..27f3316c
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-nl: calligra-l10n-nl
+calligra-l10n-nl:
+calligra-l10n-nl: Dutch language support for Calligra.
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
+calligra-l10n-nl:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nn b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nn
new file mode 100644
index 00000000..1de72c24
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-nn
@@ -0,0 +1,11 @@
+calligra-l10n-nn: calligra-l10n-nn
+calligra-l10n-nn:
+calligra-l10n-nn: Norwegian (Nynorsk) language support for Calligra.
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
+calligra-l10n-nn:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no
new file mode 100644
index 00000000..a479e2d7
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-no: calligra-l10n-no
+calligra-l10n-no:
+calligra-l10n-no: Norwegian (Bokmaal) language support for Calligra.
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
+calligra-l10n-no:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no_NY b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no_NY
new file mode 100644
index 00000000..682218a7
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-no_NY
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+calligra-l10n-no_NY: calligra-l10n-no_NY
+calligra-l10n-no_NY:
+calligra-l10n-no_NY: Norwegian (Nynorsk) language support for Calligra.
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
+calligra-l10n-no_NY:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pl b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pl
new file mode 100644
index 00000000..e2725bf5
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-pl: calligra-l10n-pl
+calligra-l10n-pl:
+calligra-l10n-pl: Polish language support for Calligra.
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
+calligra-l10n-pl:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt
new file mode 100644
index 00000000..d9fa736a
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-pt: calligra-l10n-pt
+calligra-l10n-pt:
+calligra-l10n-pt: Portuguese language support for Calligra.
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
+calligra-l10n-pt:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt_BR b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt_BR
new file mode 100644
index 00000000..616edf6e
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-pt_BR
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+calligra-l10n-pt_BR: calligra-l10n-pt_BR
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR: Brazil portuguese language support for Calligra.
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
+calligra-l10n-pt_BR:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ro b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ro
new file mode 100644
index 00000000..0483eacb
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ro
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ro: calligra-l10n-ro
+calligra-l10n-ro:
+calligra-l10n-ro: Romanian language support for Calligra.
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
+calligra-l10n-ro:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ru b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ru
new file mode 100644
index 00000000..bee95707
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ru
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ru: calligra-l10n-ru
+calligra-l10n-ru:
+calligra-l10n-ru: Russian language support for Calligra.
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
+calligra-l10n-ru:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-se b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-se
new file mode 100644
index 00000000..18356f20
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-se
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-se: calligra-l10n-se
+calligra-l10n-se:
+calligra-l10n-se: Northern Sami language support for Calligra.
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
+calligra-l10n-se:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sk b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sk
new file mode 100644
index 00000000..fed9ee2c
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sk
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-sk: calligra-l10n-sk
+calligra-l10n-sk:
+calligra-l10n-sk: Slovak language support for Calligra.
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
+calligra-l10n-sk:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sl b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sl
new file mode 100644
index 00000000..1f2fdc2b
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-sl: calligra-l10n-sl
+calligra-l10n-sl:
+calligra-l10n-sl: Slovenian language support for Calligra.
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
+calligra-l10n-sl:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr
new file mode 100644
index 00000000..14fb8aac
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-sr: calligra-l10n-sr
+calligra-l10n-sr:
+calligra-l10n-sr: Serbian language support for Calligra.
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
+calligra-l10n-sr:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr@Latn b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr@Latn
new file mode 100644
index 00000000..73c3e068
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sr@Latn
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+calligra-l10n-sr@Latn: calligra-l10n-sr@Latn
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn: Serbian in Latin script language support for Calligra.
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
+calligra-l10n-sr@Latn:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sv b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sv
new file mode 100644
index 00000000..5c0c7de7
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-sv
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-sv: calligra-l10n-sv
+calligra-l10n-sv:
+calligra-l10n-sv: Swedish language support for Calligra.
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
+calligra-l10n-sv:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ta b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ta
new file mode 100644
index 00000000..40d69103
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ta
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-ta: calligra-l10n-ta
+calligra-l10n-ta:
+calligra-l10n-ta: Tamil language support for Calligra.
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
+calligra-l10n-ta:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tg b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tg
new file mode 100644
index 00000000..ee9c25a2
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tg
@@ -0,0 +1,11 @@
+calligra-l10n-tg: calligra-l10n-tg
+calligra-l10n-tg:
+calligra-l10n-tg: Tajik language support for Calligra.
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
+calligra-l10n-tg:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-th b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-th
new file mode 100644
index 00000000..dae23d94
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-th
@@ -0,0 +1,11 @@
+calligra-l10n-th: calligra-l10n-th
+calligra-l10n-th:
+calligra-l10n-th: Thai language support for Calligra.
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
+calligra-l10n-th:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tr b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tr
new file mode 100644
index 00000000..59648105
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-tr
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-tr: calligra-l10n-tr
+calligra-l10n-tr:
+calligra-l10n-tr: Turkish language support for Calligra.
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
+calligra-l10n-tr:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uk b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uk
new file mode 100644
index 00000000..d79f053b
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uk
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-uk: calligra-l10n-uk
+calligra-l10n-uk:
+calligra-l10n-uk: Ukrainian language support for Calligra.
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
+calligra-l10n-uk:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uz b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uz
new file mode 100644
index 00000000..90c8fa09
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-uz
@@ -0,0 +1,11 @@
+calligra-l10n-uz: calligra-l10n-uz
+calligra-l10n-uz:
+calligra-l10n-uz: Uzbek language support for Calligra.
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
+calligra-l10n-uz:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ven b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ven
new file mode 100644
index 00000000..44fdda8e
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-ven
@@ -0,0 +1,11 @@
+calligra-l10n-ven: calligra-l10n-ven
+calligra-l10n-ven:
+calligra-l10n-ven: Venda language support for Calligra.
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
+calligra-l10n-ven:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-wa b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-wa
new file mode 100644
index 00000000..1121068c
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-wa
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+calligra-l10n-wa: calligra-l10n-wa
+calligra-l10n-wa:
+calligra-l10n-wa: Walloon language support for Calligra.
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
+calligra-l10n-wa:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-xh b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-xh
new file mode 100644
index 00000000..f15caa17
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-xh
@@ -0,0 +1,11 @@
+calligra-l10n-xh: calligra-l10n-xh
+calligra-l10n-xh:
+calligra-l10n-xh: Xhosa language support for Calligra.
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
+calligra-l10n-xh:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_CN b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_CN
new file mode 100644
index 00000000..566f2f1b
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_CN
@@ -0,0 +1,11 @@
+calligra-l10n-zh_CN: calligra-l10n-zh_CN
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN: Simplified Chinese language support for Calligra.
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
+calligra-l10n-zh_CN:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_TW b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_TW
new file mode 100644
index 00000000..ec452230
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zh_TW
@@ -0,0 +1,11 @@
+calligra-l10n-zh_TW: calligra-l10n-zh_TW
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW: Chinese language support for Calligra.
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
+calligra-l10n-zh_TW:
diff --git a/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zu b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zu
new file mode 100644
index 00000000..efbb898a
--- /dev/null
+++ b/source/kdei/calligra-l10n/slack-desc/slack-desc.calligra-l10n-zu
@@ -0,0 +1,11 @@
+calligra-l10n-zu: calligra-l10n-zu
+calligra-l10n-zu:
+calligra-l10n-zu: Zulu language support for Calligra.
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
+calligra-l10n-zu:
diff --git a/source/kdei/kde-l10n/kde-l10n.SlackBuild b/source/kdei/kde-l10n/kde-l10n.SlackBuild
index 04670e75..1c87ce70 100755
--- a/source/kdei/kde-l10n/kde-l10n.SlackBuild
+++ b/source/kdei/kde-l10n/kde-l10n.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008  Robby Workman  Northport, AL, USA
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -30,14 +30,14 @@
 # language packs.
 
 if [ ! -r ./languages ]; then
-  for file in kde-l10n*bz2 ; do
+  for file in kde-l10n*xz ; do
     echo $file | cut -f 3 -d - >> ./languages
   done
 fi
 
-[ -z $VERSION ] && export VERSION=4.5.5
+[ -z $VERSION ] && export VERSION=4.8.5
 [ -z $ARCH ] && export ARCH=noarch
-[ -z $BUILD ] && export BUILD=3
+[ -z $BUILD ] && export BUILD=1
 
 # Use this as CFLAGS and CXXFLAGS:
 if [ -z "$SLKCFLAGS" ]; then
@@ -47,6 +47,8 @@ if [ -z "$SLKCFLAGS" ]; then
     export SLKCFLAGS="-O2"
   elif [ "$ARCH" = "x86_64" ]; then
     export SLKCFLAGS="-O2 -fPIC"
+  elif [ "$ARCH" = "armv7hl" ]; then
+    export SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
   else
     export SLKCFLAGS="-O2"
   fi
@@ -63,8 +65,8 @@ TMP=${TMP:-/tmp}
 
 # This function will insert missing kdepim translations from kde-l10n-4.4.5:
 insert_kdepim() {
-  if [ -r $CWD/kdepim-l10n/kdepim-l10n-$(echo $PKGNAM | cut -f 3 -d -)-4.4.5.tar.bz2 ]; then
-    tar xvf $CWD/kdepim-l10n/kdepim-l10n-$(echo $PKGNAM | cut -f 3 -d -)-4.4.5.tar.bz2
+  if [ -r $CWD/kdepim-l10n/kdepim-l10n-$(echo $PKGNAM | cut -f 3 -d -)-4.4.5.tar.xz ]; then
+    tar xvf $CWD/kdepim-l10n/kdepim-l10n-$(echo $PKGNAM | cut -f 3 -d -)-4.4.5.tar.xz
   fi
   for dir in $(find . -type d -name messages) $(find . -type d -name docs) ; do
     ( cd $dir
@@ -95,7 +97,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf $PKGNAM-$VERSION 
-tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
 cd $PKGNAM-$VERSION || exit 1
 insert_kdepim;
 chown -R root:root .
diff --git a/source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh b/source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh
index 6d39e755..1c916278 100755..100644
--- a/source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh
+++ b/source/kdei/kde-l10n/kdepim-l10n/extract-kdepim-goodness.sh
@@ -1,5 +1,5 @@
 #!/bin/sh
-# This script was used to extract the kdepim part from the last kde-l10n
+# This script was used to extract the kdepim parts from the last kde-l10n
 # release that contained them.  The resulting kdepim-l10n sources will be
 # merged into our language packages.
 
diff --git a/source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff b/source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff
deleted file mode 100644
index df6184ab..00000000
--- a/source/kdei/kde-l10n/kdepim-l10n/kdepim-l10n-fr-4.4.5.korganizer.docbook.reorganize.diff
+++ /dev/null
@@ -1,34 +0,0 @@
---- ./docs/kdepim/korganizer/index.docbook.orig	2011-01-19 10:56:02.410999994 -0600
-+++ ./docs/kdepim/korganizer/index.docbook	2011-01-19 12:40:25.712999555 -0600
-@@ -108,6 +108,15 @@
- <releaseinfo
- >2.20.00</releaseinfo>
- 
-+<abstract
-+><para
-+>&korganizer; est un agenda personnel facile à utiliser (un <acronym
-+>PIM</acronym
-+>, acronyme anglais de <foreignphrase
-+>personal information manager</foreignphrase
-+>). Vous pouvez planifier des rendez-vous, des événements et des tâches à effectuer. &korganizer; vous remémorera les tâches en instances et vous aidera à respecter votre emploi du temps. </para
-+></abstract>
-+
- <keywordset>
- <keyword
- >KDE</keyword>
-@@ -127,15 +136,6 @@
- >rendez-vous</keyword>
- </keywordset>
- 
--<abstract
--><para
-->&korganizer; est un agenda personnel facile à utiliser (un <acronym
-->PIM</acronym
-->, acronyme anglais de <foreignphrase
-->personal information manager</foreignphrase
-->). Vous pouvez planifier des rendez-vous, des événements et des tâches à effectuer. &korganizer; vous remémorera les tâches en instances et vous aidera à respecter votre emploi du temps. </para
--></abstract>
--
- </bookinfo>
- 
- <chapter id="introduction">
diff --git a/source/kdei/kde-l10n/languages b/source/kdei/kde-l10n/languages
index a46f4ced..8fe9df5d 100644
--- a/source/kdei/kde-l10n/languages
+++ b/source/kdei/kde-l10n/languages
@@ -1,5 +1,6 @@
 ar
 bg
+bs
 ca
 ca@valencia
 cs
@@ -7,18 +8,15 @@ da
 de
 el
 en_GB
-eo
 es
 et
 eu
+fa
 fi
 fr
-fy
 ga
 gl
-gu
 he
-hi
 hr
 hu
 ia
@@ -28,11 +26,9 @@ it
 ja
 kk
 km
-kn
 ko
 lt
 lv
-ml
 nb
 nds
 nl
@@ -43,13 +39,17 @@ pt
 pt_BR
 ro
 ru
+si
 sk
 sl
 sr
 sv
+tg
 th
 tr
+ug
 uk
+vi
 wa
 zh_CN
 zh_TW
diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bs b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bs
new file mode 100644
index 00000000..04f60af1
--- /dev/null
+++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bs
@@ -0,0 +1,11 @@
+kde-l10n-bs: kde-l10n-bs
+kde-l10n-bs:
+kde-l10n-bs: Bosnian language support for KDE.
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
+kde-l10n-bs:
diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia
index 0f1a9577..f8ecb792 100644
--- a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia
+++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia
@@ -1,4 +1,4 @@
-kde-l10n-ca: kde-l10n-ca@valencia
+kde-l10n-ca@valencia: kde-l10n-ca@valencia
 kde-l10n-ca@valencia:
 kde-l10n-ca@valencia: Catalan (Valencian) language support for KDE.
 kde-l10n-ca@valencia:
diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fa b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fa
new file mode 100644
index 00000000..28fd9799
--- /dev/null
+++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fa
@@ -0,0 +1,11 @@
+kde-l10n-fa: kde-l10n-fa
+kde-l10n-fa:
+kde-l10n-fa: Farsi language support for KDE.
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
+kde-l10n-fa:
diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ug b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ug
new file mode 100644
index 00000000..d7d8234e
--- /dev/null
+++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ug
@@ -0,0 +1,11 @@
+kde-l10n-ug: kde-l10n-ug
+kde-l10n-ug:
+kde-l10n-ug: Uyghur language support for KDE.
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
+kde-l10n-ug:
diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-vi b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-vi
new file mode 100644
index 00000000..ee4a6d54
--- /dev/null
+++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-vi
@@ -0,0 +1,11 @@
+kde-l10n-vi: kde-l10n-vi
+kde-l10n-vi:
+kde-l10n-vi: Vietnamese language support for KDE.
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
+kde-l10n-vi:
diff --git a/source/kdei/koffice-l10n/koffice-l10n.SlackBuild b/source/kdei/koffice-l10n/koffice-l10n.SlackBuild
deleted file mode 100755
index f89645dd..00000000
--- a/source/kdei/koffice-l10n/koffice-l10n.SlackBuild
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008  Robby Workman  Northport, AL, USA
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#  This script should build any of the language packs if run with (for example):
-#    PKGLANG=de ./koffice-l10n.SlackBuild
-#  You should be able to build all of them with something like this:
-#    for i in $(cat languages) ; do PKGLANG=$i ./koffice-l10n.SlackBuild ; done
-# If ./languages is missing and this script is called without options, the
-# default is to create an up-to-date ./languages list and build all the
-# language packs.
-
-if [ ! -r ./languages ]; then
-  for file in koffice-l10n*bz2 ; do
-    echo $file | cut -f 3 -d - >> ./languages
-  done
-fi
-
-[ -z $VERSION ] && export VERSION=2.3.2
-[ -z $ARCH ] && export ARCH=noarch
-[ -z $BUILD ] && export BUILD=1
-
-# Use this as CFLAGS and CXXFLAGS:
-if [ -z "$SLKCFLAGS" ]; then
-  if [ "$ARCH" = "i486" ]; then
-    export SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  elif [ "$ARCH" = "s390" ]; then
-    export SLKCFLAGS="-O2"
-  elif [ "$ARCH" = "x86_64" ]; then
-    export SLKCFLAGS="-O2 -fPIC"
-  fi
-fi
-
-# Get the kde environment variables
-[ -d kdebase ] && . ./kdebase/profile.d/kde.sh
-
-# Set the config option variables if they are not already set:
-[ -r ../KDE.options ] && . ../KDE.options
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-
-make_language_pack() {
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PKGNAM-$VERSION 
-tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-mkdir -p build
-cd build
-  cmake \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc/kde \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-  make || exit 1
-  make install DESTDIR=$PKG || exit 1
-cd -
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-mkdir -p $PKG/install
-cat $CWD/slack-desc/slack-desc.koffice-l10n-$PKGLANG > $PKG/install/slack-desc
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-}
-
-if [ -z $PKGLANG ]; then
-  for PKGLANG in $(cat languages) ; do
-    PKGNAM=koffice-l10n-$PKGLANG
-    PKG=$TMP/package-koffice-l10n-$PKGLANG
-    # The global options may be overridden here (if needed):
-    [ -r ./local.options/$PKGLANG ] && . ./local.options/$PKGLANG
-    make_language_pack;
-  done
-else
-  PKGNAM=koffice-l10n-$PKGLANG
-  PKG=$TMP/package-koffice-l10n-$PKGLANG
-  # The global options may be overridden here (if needed):
-  [ -r ./local.options/$PKGLANG ] && . ./local.options/$PKGLANG
-  make_language_pack;
-fi
-
diff --git a/source/kdei/koffice-l10n/languages b/source/kdei/koffice-l10n/languages
deleted file mode 100644
index 072b9395..00000000
--- a/source/kdei/koffice-l10n/languages
+++ /dev/null
@@ -1,27 +0,0 @@
-ca
-ca@valencia
-da
-de
-el
-en_GB
-es
-et
-fr
-gl
-hu
-it
-ja
-kk
-nb
-nds
-nl
-pl
-pt
-pt_BR
-ru
-sv
-tr
-uk
-wa
-zh_CN
-zh_TW
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-af b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-af
deleted file mode 100644
index 2159ffe9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-af
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-af: koffice-l10n-af
-koffice-l10n-af:
-koffice-l10n-af: Afrikaans language support for KOffice.
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
-koffice-l10n-af:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ar b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ar
deleted file mode 100644
index f1135341..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ar
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-ar: koffice-l10n-ar
-koffice-l10n-ar:
-koffice-l10n-ar: Arabic language support for KOffice.
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
-koffice-l10n-ar:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-az b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-az
deleted file mode 100644
index e7b49933..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-az
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-az: koffice-l10n-az
-koffice-l10n-az:
-koffice-l10n-az: Azerbaijani language support for KOffice.
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
-koffice-l10n-az:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bg b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bg
deleted file mode 100644
index a45db37d..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bg
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-bg: koffice-l10n-bg
-koffice-l10n-bg:
-koffice-l10n-bg: Bulgarian language support for KOffice.
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
-koffice-l10n-bg:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-br b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-br
deleted file mode 100644
index 51dde265..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-br
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-br: koffice-l10n-br
-koffice-l10n-br:
-koffice-l10n-br: Breton language support for KOffice.
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
-koffice-l10n-br:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bs b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bs
deleted file mode 100644
index 66888376..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-bs
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-bs: koffice-l10n-bs
-koffice-l10n-bs:
-koffice-l10n-bs: Bosnian language support for KOffice.
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
-koffice-l10n-bs:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca
deleted file mode 100644
index 29cf70d6..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-ca: koffice-l10n-ca
-koffice-l10n-ca:
-koffice-l10n-ca: Catalan language support for KOffice.
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
-koffice-l10n-ca:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca@valencia b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca@valencia
deleted file mode 100644
index 982d6f1b..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ca@valencia
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-ca@valencia: koffice-l10n-ca@valencia
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia: Valencian (southern Catalan) language support for KOffice.
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
-koffice-l10n-ca@valencia:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cs b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cs
deleted file mode 100644
index 3a26b06e..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cs
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-cs: koffice-l10n-cs
-koffice-l10n-cs:
-koffice-l10n-cs: Czech language support for KOffice.
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
-koffice-l10n-cs:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cy b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cy
deleted file mode 100644
index 7e62677f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-cy
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-cy: koffice-l10n-cy
-koffice-l10n-cy:
-koffice-l10n-cy: Welsh language support for KOffice.
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
-koffice-l10n-cy:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-da b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-da
deleted file mode 100644
index 4727b048..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-da
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-da: koffice-l10n-da
-koffice-l10n-da:
-koffice-l10n-da: Danish language support for KOffice.
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
-koffice-l10n-da:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-de b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-de
deleted file mode 100644
index f24cbd9f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-de
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-de: koffice-l10n-de
-koffice-l10n-de:
-koffice-l10n-de: German language support for KOffice.
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
-koffice-l10n-de:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-el b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-el
deleted file mode 100644
index f7e3f21c..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-el
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-el: koffice-l10n-el
-koffice-l10n-el:
-koffice-l10n-el: Greek language support for KOffice.
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
-koffice-l10n-el:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-en_GB b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-en_GB
deleted file mode 100644
index 529c204f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-en_GB
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-koffice-l10n-en_GB: koffice-l10n-en_GB
-koffice-l10n-en_GB:
-koffice-l10n-en_GB: English (UK) language support for KOffice.
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
-koffice-l10n-en_GB:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eo b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eo
deleted file mode 100644
index 4cb444f9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eo
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-eo: koffice-l10n-eo
-koffice-l10n-eo:
-koffice-l10n-eo: Esperanto language support for KOffice.
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
-koffice-l10n-eo:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-es b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-es
deleted file mode 100644
index da24c7cc..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-es
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-es: koffice-l10n-es
-koffice-l10n-es:
-koffice-l10n-es: Spanish language support for KOffice.
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
-koffice-l10n-es:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-et b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-et
deleted file mode 100644
index e5f433b9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-et
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-et: koffice-l10n-et
-koffice-l10n-et:
-koffice-l10n-et: Estonian language support for KOffice.
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
-koffice-l10n-et:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eu b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eu
deleted file mode 100644
index 993f3ace..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-eu
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makeu it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lineu for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-eu: koffice-l10n-eu
-koffice-l10n-eu:
-koffice-l10n-eu: Basque language support for KOffice.
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
-koffice-l10n-eu:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fa b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fa
deleted file mode 100644
index 82521df0..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fa
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-fa: koffice-l10n-fa
-koffice-l10n-fa:
-koffice-l10n-fa: Persian (Farsi) language support for KOffice.
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
-koffice-l10n-fa:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fi b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fi
deleted file mode 100644
index f28aaa04..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fi
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-fi: koffice-l10n-fi
-koffice-l10n-fi:
-koffice-l10n-fi: Finnish language support for KOffice.
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
-koffice-l10n-fi:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fr b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fr
deleted file mode 100644
index f05abb62..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fr
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-fr: koffice-l10n-fr
-koffice-l10n-fr:
-koffice-l10n-fr: French language support for KOffice.
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
-koffice-l10n-fr:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fy b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fy
deleted file mode 100644
index 6ca3bd25..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-fy
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-fy: koffice-l10n-fy
-koffice-l10n-fy:
-koffice-l10n-fy: Abkhasysk language support for KOffice.
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
-koffice-l10n-fy:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ga b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ga
deleted file mode 100644
index 4f0e492b..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ga
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makeu it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lineu for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ga: koffice-l10n-ga
-koffice-l10n-ga:
-koffice-l10n-ga: Irish Gaelic language support for KOffice.
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
-koffice-l10n-ga:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-gl b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-gl
deleted file mode 100644
index 10005a9a..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-gl
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-gl: koffice-l10n-gl
-koffice-l10n-gl:
-koffice-l10n-gl: Galician language support for KOffice.
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
-koffice-l10n-gl:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-he b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-he
deleted file mode 100644
index 40f3eeea..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-he
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-he: koffice-l10n-he
-koffice-l10n-he:
-koffice-l10n-he: Hebrew language support for KOffice.
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
-koffice-l10n-he:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hi b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hi
deleted file mode 100644
index 712c9a63..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hi
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-hi: koffice-l10n-hi
-koffice-l10n-hi:
-koffice-l10n-hi: Hindi language support for KOffice.
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
-koffice-l10n-hi:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hne b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hne
deleted file mode 100644
index 2a1be13f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hne
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-hne: koffice-l10n-hne
-koffice-l10n-hne:
-koffice-l10n-hne: Chhattisgarhi language support for KOffice.
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
-koffice-l10n-hne:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hsb b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hsb
deleted file mode 100644
index ea1bcb7f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hsb
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-hsb: koffice-l10n-hsb
-koffice-l10n-hsb:
-koffice-l10n-hsb: Upper Sorbian language support for KOffice.
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
-koffice-l10n-hsb:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hu b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hu
deleted file mode 100644
index 251091b9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-hu
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-hu: koffice-l10n-hu
-koffice-l10n-hu:
-koffice-l10n-hu: Hungarian language support for KOffice.
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
-koffice-l10n-hu:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-is b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-is
deleted file mode 100644
index 4a11c148..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-is
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-is: koffice-l10n-is
-koffice-l10n-is:
-koffice-l10n-is: Icelandic language support for KOffice.
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
-koffice-l10n-is:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-it b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-it
deleted file mode 100644
index 85fa5c7b..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-it
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-it: koffice-l10n-it
-koffice-l10n-it:
-koffice-l10n-it: Italian language support for KOffice.
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
-koffice-l10n-it:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ja b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ja
deleted file mode 100644
index 4da23a0d..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ja
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ja: koffice-l10n-ja
-koffice-l10n-ja:
-koffice-l10n-ja: Japanese language support for KOffice.
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
-koffice-l10n-ja:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-kk b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-kk
deleted file mode 100644
index 4014fdfb..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-kk
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-kk: koffice-l10n-kk
-koffice-l10n-kk:
-koffice-l10n-kk: Kazakh language support for KOffice.
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
-koffice-l10n-kk:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-km b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-km
deleted file mode 100644
index 4caa9431..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-km
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-km: koffice-l10n-km
-koffice-l10n-km:
-koffice-l10n-km: Khmer language support for KOffice.
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
-koffice-l10n-km:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lo b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lo
deleted file mode 100644
index ff2f1ea9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lo
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-lo: koffice-l10n-lo
-koffice-l10n-lo:
-koffice-l10n-lo: Lao language support for KOffice.
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
-koffice-l10n-lo:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lt b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lt
deleted file mode 100644
index 14d3fdb0..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lt
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-lt: koffice-l10n-lt
-koffice-l10n-lt:
-koffice-l10n-lt: Lithuanian language support for KOffice.
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
-koffice-l10n-lt:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lv b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lv
deleted file mode 100644
index a6bdadd3..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-lv
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-lv: koffice-l10n-lv
-koffice-l10n-lv:
-koffice-l10n-lv: Latvian language support for KOffice.
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
-koffice-l10n-lv:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mk b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mk
deleted file mode 100644
index af7d02c4..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mk
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-mk: koffice-l10n-mk
-koffice-l10n-mk:
-koffice-l10n-mk: Macedonian language support for KOffice.
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
-koffice-l10n-mk:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ms b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ms
deleted file mode 100644
index 74868e07..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ms
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ms: koffice-l10n-ms
-koffice-l10n-ms:
-koffice-l10n-ms: Malay language support for KOffice.
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
-koffice-l10n-ms:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mt b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mt
deleted file mode 100644
index 1b35b168..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-mt
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-mt: koffice-l10n-mt
-koffice-l10n-mt:
-koffice-l10n-mt: Maltese language support for KOffice.
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
-koffice-l10n-mt:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nb b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nb
deleted file mode 100644
index bb8c5889..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nb
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-nb: koffice-l10n-nb
-koffice-l10n-nb:
-koffice-l10n-nb: Norwegian (Bokmaal) language support for KOffice.
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
-koffice-l10n-nb:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nds b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nds
deleted file mode 100644
index 5f26d82f..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nds
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-nds: koffice-l10n-nds
-koffice-l10n-nds:
-koffice-l10n-nds: Low Saxon language support for KOffice.
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
-koffice-l10n-nds:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ne b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ne
deleted file mode 100644
index 811d8eeb..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ne
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-ne: koffice-l10n-ne
-koffice-l10n-ne:
-koffice-l10n-ne: Nepali language support for KOffice.
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
-koffice-l10n-ne:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nl b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nl
deleted file mode 100644
index 71698789..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nl
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-nl: koffice-l10n-nl
-koffice-l10n-nl:
-koffice-l10n-nl: Dutch language support for KOffice.
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
-koffice-l10n-nl:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nn b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nn
deleted file mode 100644
index d2c0b300..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-nn
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-nn: koffice-l10n-nn
-koffice-l10n-nn:
-koffice-l10n-nn: Norwegian (Nynorsk) language support for KOffice.
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
-koffice-l10n-nn:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no
deleted file mode 100644
index df9e73ce..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-no: koffice-l10n-no
-koffice-l10n-no:
-koffice-l10n-no: Norwegian (Bokmaal) language support for KOffice.
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
-koffice-l10n-no:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no_NY b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no_NY
deleted file mode 100644
index e86be3ba..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-no_NY
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-koffice-l10n-no_NY: koffice-l10n-no_NY
-koffice-l10n-no_NY:
-koffice-l10n-no_NY: Norwegian (Nynorsk) language support for KOffice.
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
-koffice-l10n-no_NY:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pl b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pl
deleted file mode 100644
index 1ba2d560..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pl
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-pl: koffice-l10n-pl
-koffice-l10n-pl:
-koffice-l10n-pl: Polish language support for KOffice.
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
-koffice-l10n-pl:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt
deleted file mode 100644
index 871f589e..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-pt: koffice-l10n-pt
-koffice-l10n-pt:
-koffice-l10n-pt: Portuguese language support for KOffice.
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
-koffice-l10n-pt:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt_BR b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt_BR
deleted file mode 100644
index 68adcd39..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-pt_BR
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-koffice-l10n-pt_BR: koffice-l10n-pt_BR
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR: Brazil portuguese language support for KOffice.
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
-koffice-l10n-pt_BR:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ro b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ro
deleted file mode 100644
index 3e67a3a8..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ro
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ro: koffice-l10n-ro
-koffice-l10n-ro:
-koffice-l10n-ro: Romanian language support for KOffice.
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
-koffice-l10n-ro:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ru b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ru
deleted file mode 100644
index 8d72bd4b..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ru
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ru: koffice-l10n-ru
-koffice-l10n-ru:
-koffice-l10n-ru: Russian language support for KOffice.
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
-koffice-l10n-ru:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-se b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-se
deleted file mode 100644
index 1798892e..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-se
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-se: koffice-l10n-se
-koffice-l10n-se:
-koffice-l10n-se: Northern Sami language support for KOffice.
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
-koffice-l10n-se:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sk b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sk
deleted file mode 100644
index d259bbc5..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sk
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-sk: koffice-l10n-sk
-koffice-l10n-sk:
-koffice-l10n-sk: Slovak language support for KOffice.
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
-koffice-l10n-sk:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sl b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sl
deleted file mode 100644
index 79d9786c..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sl
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-sl: koffice-l10n-sl
-koffice-l10n-sl:
-koffice-l10n-sl: Slovenian language support for KOffice.
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
-koffice-l10n-sl:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr
deleted file mode 100644
index 97b2d1ad..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-sr: koffice-l10n-sr
-koffice-l10n-sr:
-koffice-l10n-sr: Serbian language support for KOffice.
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
-koffice-l10n-sr:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr@Latn b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr@Latn
deleted file mode 100644
index 7c90acc3..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sr@Latn
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-                    |-----handy-ruler------------------------------------------------------|
-koffice-l10n-sr@Latn: koffice-l10n-sr@Latn
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn: Serbian in Latin script language support for KOffice.
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
-koffice-l10n-sr@Latn:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sv b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sv
deleted file mode 100644
index 01be9831..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-sv
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-sv: koffice-l10n-sv
-koffice-l10n-sv:
-koffice-l10n-sv: Swedish language support for KOffice.
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
-koffice-l10n-sv:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ta b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ta
deleted file mode 100644
index bb8a36d2..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ta
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-ta: koffice-l10n-ta
-koffice-l10n-ta:
-koffice-l10n-ta: Tamil language support for KOffice.
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
-koffice-l10n-ta:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tg b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tg
deleted file mode 100644
index f5b5913b..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tg
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-tg: koffice-l10n-tg
-koffice-l10n-tg:
-koffice-l10n-tg: Tajik language support for KOffice.
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
-koffice-l10n-tg:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-th b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-th
deleted file mode 100644
index 58e1e3b0..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-th
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-th: koffice-l10n-th
-koffice-l10n-th:
-koffice-l10n-th: Thai language support for KOffice.
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
-koffice-l10n-th:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tr b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tr
deleted file mode 100644
index e7543d62..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-tr
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-tr: koffice-l10n-tr
-koffice-l10n-tr:
-koffice-l10n-tr: Turkish language support for KOffice.
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
-koffice-l10n-tr:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uk b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uk
deleted file mode 100644
index 87103ead..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uk
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-uk: koffice-l10n-uk
-koffice-l10n-uk:
-koffice-l10n-uk: Ukrainian language support for KOffice.
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
-koffice-l10n-uk:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uz b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uz
deleted file mode 100644
index d2d7cedb..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-uz
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-uz: koffice-l10n-uz
-koffice-l10n-uz:
-koffice-l10n-uz: Uzbek language support for KOffice.
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
-koffice-l10n-uz:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ven b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ven
deleted file mode 100644
index bd67d437..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-ven
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-ven: koffice-l10n-ven
-koffice-l10n-ven:
-koffice-l10n-ven: Venda language support for KOffice.
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
-koffice-l10n-ven:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-wa b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-wa
deleted file mode 100644
index e88ee5e3..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-wa
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-koffice-l10n-wa: koffice-l10n-wa
-koffice-l10n-wa:
-koffice-l10n-wa: Walloon language support for KOffice.
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
-koffice-l10n-wa:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-xh b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-xh
deleted file mode 100644
index 5bd52a1d..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-xh
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-xh: koffice-l10n-xh
-koffice-l10n-xh:
-koffice-l10n-xh: Xhosa language support for KOffice.
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
-koffice-l10n-xh:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_CN b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_CN
deleted file mode 100644
index 52bf8770..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_CN
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-zh_CN: koffice-l10n-zh_CN
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN: Simplified Chinese language support for KOffice.
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
-koffice-l10n-zh_CN:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_TW b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_TW
deleted file mode 100644
index 233fb2f9..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zh_TW
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-zh_TW: koffice-l10n-zh_TW
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW: Chinese language support for KOffice.
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
-koffice-l10n-zh_TW:
diff --git a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zu b/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zu
deleted file mode 100644
index 72828f01..00000000
--- a/source/kdei/koffice-l10n/slack-desc/slack-desc.koffice-l10n-zu
+++ /dev/null
@@ -1,11 +0,0 @@
-koffice-l10n-zu: koffice-l10n-zu
-koffice-l10n-zu:
-koffice-l10n-zu: Zulu language support for KOffice.
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
-koffice-l10n-zu:
diff --git a/source/l/ConsoleKit/ConsoleKit.SlackBuild b/source/l/ConsoleKit/ConsoleKit.SlackBuild
index a1f7ae50..b3d7869d 100755
--- a/source/l/ConsoleKit/ConsoleKit.SlackBuild
+++ b/source/l/ConsoleKit/ConsoleKit.SlackBuild
@@ -24,8 +24,8 @@
 # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-PRGNAM=ConsoleKit
-VERSION=${VERSION:-0.4.3}
+PKGNAM=ConsoleKit
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j6}
@@ -40,7 +40,7 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -59,9 +59,9 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 
 chown -R root:root .
 find . \
@@ -73,6 +73,11 @@ find . \
 # Clean up at_console compat files, bug #257761
 zcat $CWD/consolekit-0.2.10-cleanup_console_tags.patch.gz | patch -p1 || exit 1
 
+# ck-history: don't truncate --frequent output to 8 chars
+# GDM screenscrapes the output and so we need the full username.
+# https://bugzilla.gnome.org/show_bug.cgi?id=650330
+zcat $CWD/ck-history-don-t-truncate-frequent-output-to-8-chars.patch.gz | patch -p1 || exit 1
+
 # Revert "Only set sessions to be is-local=true if set by a trusted party"
 #   http://cgit.freedesktop.org/ConsoleKit/commit/?id=4f88228f31a63c026c424a92827f26ad7535275c
 # Here are the bug reports:
@@ -92,7 +97,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --sysconfdir=/etc \
   --localstatedir=/var \
   --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --with-pid-file=/var/run/ConsoleKit/pid \
   --enable-docbook-docs \
   --enable-pam-module=no \
@@ -119,18 +124,38 @@ chmod 0755 $PKG/etc/rc.d/rc.consolekit.new
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  AUTHORS COPYING HACKING INSTALL NEWS README TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/ConsoleKit/ck-history-don-t-truncate-frequent-output-to-8-chars.patch b/source/l/ConsoleKit/ck-history-don-t-truncate-frequent-output-to-8-chars.patch
new file mode 100644
index 00000000..89b11d08
--- /dev/null
+++ b/source/l/ConsoleKit/ck-history-don-t-truncate-frequent-output-to-8-chars.patch
@@ -0,0 +1,28 @@
+From 803cbdfbd78b66b17ead45b1584d65a258e785bf Mon Sep 17 00:00:00 2001
+From: Ray Strode <rstrode@redhat.com>
+Date: Tue, 24 May 2011 20:58:10 -0400
+Subject: [PATCH] ck-history: don't truncate --frequent output to 8 chars
+
+GDM screenscrapes the output and so we need the full username.
+
+https://bugzilla.gnome.org/show_bug.cgi?id=650330
+---
+ tools/ck-history.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/ck-history.c b/tools/ck-history.c
+index d02caaa..85d9e6f 100644
+--- a/tools/ck-history.c
++++ b/tools/ck-history.c
+@@ -804,7 +804,7 @@ generate_report_frequent (int         uid,
+                 data = user_counts->data;
+ 
+                 username = get_user_name_for_uid (data->uid);
+-                g_print ("%-8.8s %u\n", username, data->count);
++                g_print ("%-8s %u\n", username, data->count);
+                 g_free (data);
+                 user_counts = g_list_delete_link (user_counts, user_counts);
+                 g_free (username);
+-- 
+1.7.9.4
+
diff --git a/source/l/GConf/GConf.SlackBuild b/source/l/GConf/GConf.SlackBuild
new file mode 100755
index 00000000..2e1b1b5d
--- /dev/null
+++ b/source/l/GConf/GConf.SlackBuild
@@ -0,0 +1,129 @@
+#!/bin/sh
+
+# Slackware build script for GConf
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=GConf
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# This should be fixed in 3.2.6, I hope - it's a bug exposed by glib-2.32
+sed -i '/INTROSPECTION_SCANNER_ARGS/s#$# -lgmodule-2.0#' gconf/Makefile.in
+
+# --disable-orbit means we use DBUS for IPC
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --with-gtk=2.0 \
+  --disable-static \
+  --enable-debug=no \
+  --disable-orbit \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mv $PKG/etc/gconf/2/path $PKG/etc/gconf/2/path.new
+mv $PKG/etc/gconf/2/evoldap.conf $PKG/etc/gconf/2/evoldap.conf.new
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a AUTHORS COPYING* NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/GConf/doinst.sh b/source/l/GConf/doinst.sh
new file mode 100644
index 00000000..e5ec9380
--- /dev/null
+++ b/source/l/GConf/doinst.sh
@@ -0,0 +1,20 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/gconf/2/path.new
+config etc/gconf/2/evoldap.conf.new
+
+if [ -x /usr/bin/gio-querymodules ]; then
+  chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ >/dev/null 2>&1
+fi
+
diff --git a/source/l/GConf/slack-desc b/source/l/GConf/slack-desc
new file mode 100644
index 00000000..7994adc8
--- /dev/null
+++ b/source/l/GConf/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler-------------------------------------------------------|
+GConf: GConf (GNOME configuration library)
+GConf: 
+GConf: GConf is a configuration database system designed for the GNOME project
+GConf: and applications based on GTK+.  It is conceptually similar to the
+GConf: Windows registry.
+GConf:
+GConf: For information, see:  http://projects.gnome.org/gconf/
+GConf: 
+GConf: 
+GConf: 
+GConf: 
diff --git a/source/l/M2Crypto/M2Crypto.SlackBuild b/source/l/M2Crypto/M2Crypto.SlackBuild
index 583b12f1..40b710c3 100755
--- a/source/l/M2Crypto/M2Crypto.SlackBuild
+++ b/source/l/M2Crypto/M2Crypto.SlackBuild
@@ -24,7 +24,7 @@
 
 PKGNAM=M2Crypto
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/PyQt/PyQt.SlackBuild b/source/l/PyQt/PyQt.SlackBuild
index 9fa6d065..eb21945a 100755
--- a/source/l/PyQt/PyQt.SlackBuild
+++ b/source/l/PyQt/PyQt.SlackBuild
@@ -3,7 +3,7 @@
 # Slackware build script for PyQt
 
 # Copyright 2008  Aleksandar Samardzic <asamardzic@gmail.com>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -26,23 +26,27 @@
 # Modified by Robby Workman <rworkman@slackware.com>
 # Modified by Eric Hameleers <alien@slackware.com>
 
-VERSION=${VERSION:-4.8.1}
-BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:--j6}
+PKGNAM=PyQt
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-PyQt
+PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -50,6 +54,8 @@ elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else
   SLKCFLAGS="-O2"
 fi
@@ -57,12 +63,12 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
-rm -rf PyQt-x11-gpl-$VERSION
-tar xvf $CWD/PyQt-x11-gpl-$VERSION.tar.?z* || exit 1
-cd PyQt-x11-gpl-$VERSION || exit 1
+rm -rf $PKGNAM-x11-gpl-$VERSION
+tar xvf $CWD/$PKGNAM-x11-gpl-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-x11-gpl-$VERSION || exit 1
 
 # Fix phonon detection:
-zcat $CWD/PyQt.phonon.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/$PKGNAM.phonon.diff.gz | patch -p1 --verbose || exit 1
 
 chown -R root:root .
 find . \
@@ -85,14 +91,14 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/PyQt-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   GPL_EXCEPTION*.TXT LICENSE.* NEWS OPENSOURCE-NOTICE.TXT README THANKS doc/* \
-  $PKG/usr/doc/PyQt-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/PyQt-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz
 
diff --git a/source/l/PyQt/PyQt.info b/source/l/PyQt/PyQt.info
deleted file mode 100644
index f127e6d9..00000000
--- a/source/l/PyQt/PyQt.info
+++ /dev/null
@@ -1,2 +0,0 @@
-HOMEPAGE="http://www.riverbankcomputing.co.uk/software/pyqt/"
-DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-x11-gpl-4.5.4.tar.gz"
diff --git a/source/l/PyQt/slack-desc b/source/l/PyQt/slack-desc
index 4e01c51a..f713c87c 100644
--- a/source/l/PyQt/slack-desc
+++ b/source/l/PyQt/slack-desc
@@ -11,9 +11,9 @@ PyQt:
 PyQt: PyQt is a set of Python bindings for Trolltech's Qt application
 PyQt: framework and runs on all platforms supported by Qt.
 PyQt: 
+PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/pyqt/
 PyQt: 
 PyQt:
 PyQt:
 PyQt:
-PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/PyQt/
 PyQt:
diff --git a/source/l/QScintilla/QScintilla.SlackBuild b/source/l/QScintilla/QScintilla.SlackBuild
index b3623587..4f24655e 100755
--- a/source/l/QScintilla/QScintilla.SlackBuild
+++ b/source/l/QScintilla/QScintilla.SlackBuild
@@ -3,7 +3,7 @@
 # Slackware build script for QScintilla
 
 # Copyright 2008  Robby Workman <rworkman@slackware.com> Northport, AL, USA
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,39 +24,50 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=QScintilla
-VERSION=${VERSION:-$(echo ${PKGNAM}-gpl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-QScintilla
+PKG=$TMP/package-$PKGNAM
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf QScintilla-gpl-$VERSION
-tar xvf $CWD/QScintilla-gpl-$VERSION.tar.?z* || exit 1
-cd QScintilla-gpl-$VERSION || exit 1
+rm -rf $PKGNAM-gpl-$VERSION
+tar xvf $CWD/$PKGNAM-gpl-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-gpl-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -66,7 +77,7 @@ find . \
 
 cd Qt4
   qmake -o Makefile qscintilla.pro
-  make
+  make $NUMJOBS
   make install INSTALL_ROOT=$PKG
   # Yes, we'll spam the dev environment so we can build the other parts.
   make install
@@ -74,27 +85,34 @@ cd -
 
 cd designer-Qt4
   qmake -o Makefile designer.pro
-  make
+  make $NUMJOBS
   make install INSTALL_ROOT=$PKG
 cd -
 
 cd Python
   python configure.py -p 4 
-  make
+  make $NUMJOBS
   make install DESTDIR=$PKG
 cd -
 
+# Link the shared libraries into /usr/lib${LIBDIRSUFFIX}:
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  for file in qt/lib/*.so* ; do
+    ln -sf $file .
+  done
+)
+
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/QScintilla-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   *GPL* COPYING* NEWS OPENSOURCE-NOTICE.TXT README* doc/html-Qt4 doc/Scintilla \
-  $PKG/usr/doc/QScintilla-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/QScintilla-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/akonadi/akonadi.SlackBuild b/source/l/akonadi/akonadi.SlackBuild
index ebaa32ac..fe36ea40 100755
--- a/source/l/akonadi/akonadi.SlackBuild
+++ b/source/l/akonadi/akonadi.SlackBuild
@@ -26,24 +26,22 @@
 
 PKGNAM=akonadi
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -53,16 +51,23 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
@@ -71,6 +76,8 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
+# If we do not specify the correct QT_PLUGINS_DIR, then the application
+# decides on using $QT4DIR/qt4/plugins instead.
 mkdir -p build
 cd build
   cmake \
@@ -80,7 +87,9 @@ cd build
     -DLIB_SUFFIX=${LIBDIRSUFFIX} \
     -DCMAKE_INSTALL_PREFIX=/usr \
     -DMAN_INSTALL_DIR=/usr/man \
-    -DINSTALL_QSQLITE_IN_QT_PREFIX=ON \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DINSTALL_QSQLITE_IN_QT_PREFIX:BOOL=ON \
+    -DQT_PLUGINS_DIR=/usr/lib$LIBDIRSUFFIX/qt/plugins \
     ..
    make $NUMJOBS || make || exit 1
    make install DESTDIR=$PKG || exit 1
diff --git a/source/l/akonadi/slack-desc b/source/l/akonadi/slack-desc
index a120cebf..d0c26bb6 100644
--- a/source/l/akonadi/slack-desc
+++ b/source/l/akonadi/slack-desc
@@ -13,7 +13,7 @@ akonadi: and meta data providing concurrent read, write, and query access.
 akonadi: It will provide a unique desktop wide object identification and 
 akonadi: retrieval.
 akonadi:
+akonadi: Homepage:  http://www.kdepim.org/akonadi/
 akonadi:
 akonadi:
-akonadi: Homepage:  http://www.kdepim.org/akonadi/
 akonadi:
diff --git a/source/l/alsa-lib/alsa-lib.SlackBuild b/source/l/alsa-lib/alsa-lib.SlackBuild
index f15c9631..b93a905d 100755
--- a/source/l/alsa-lib/alsa-lib.SlackBuild
+++ b/source/l/alsa-lib/alsa-lib.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
diff --git a/source/l/alsa-oss/alsa-oss.SlackBuild b/source/l/alsa-oss/alsa-oss.SlackBuild
index ccfe3868..b6073ebc 100755
--- a/source/l/alsa-oss/alsa-oss.SlackBuild
+++ b/source/l/alsa-oss/alsa-oss.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -59,7 +59,7 @@ fi
 
 cd $TMP
 rm -rf alsa-oss-$VERSION
-tar xjvf $CWD/alsa-oss-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/alsa-oss-$VERSION.tar.?z* || exit 1
 cd alsa-oss-$VERSION
 chown -R root:root .
 find . \
diff --git a/source/l/apr-util/apr-util.SlackBuild b/source/l/apr-util/apr-util.SlackBuild
index b25d55c4..7faff6df 100755
--- a/source/l/apr-util/apr-util.SlackBuild
+++ b/source/l/apr-util/apr-util.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo apr-util-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -90,7 +90,7 @@ CFLAGS="$SLKCFLAGS" \
   --with-ldap \
   --disable-static \
   --without-sqlite2 \
-  $ARCH-slackware-linux
+  --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
 make dox || exit 1
diff --git a/source/l/apr-util/apr-util.url b/source/l/apr-util/apr-util.url
new file mode 100644
index 00000000..264a63c0
--- /dev/null
+++ b/source/l/apr-util/apr-util.url
@@ -0,0 +1,2 @@
+http://www.apache.org/dist/apr/apr-util-1.3.11.tar.bz2
+http://www.apache.org/dist/apr/apr-util-1.3.11.tar.bz2.asc
diff --git a/source/l/apr/apr.SlackBuild b/source/l/apr/apr.SlackBuild
index 2463b5a2..193f602b 100755
--- a/source/l/apr/apr.SlackBuild
+++ b/source/l/apr/apr.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo apr-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -62,9 +62,6 @@ rm -rf apr-$VERSION
 tar xvf $CWD/apr-$VERSION.tar.bz2 || exit 1
 cd apr-$VERSION
 
-# Patch to fix aliasing issue exposed by gcc-4.5.1:
-zcat $CWD/apr.apr_ring.h.gcc45.diff.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/l/apr/apr.apr_ring.h.gcc45.diff b/source/l/apr/apr.apr_ring.h.gcc45.diff
deleted file mode 100644
index c298cf4e..00000000
--- a/source/l/apr/apr.apr_ring.h.gcc45.diff
+++ /dev/null
@@ -1,13 +0,0 @@
---- ./include/apr_ring.h.orig	2008-06-01 19:12:00.000000000 -0500
-+++ ./include/apr_ring.h	2011-02-12 13:17:41.000000000 -0600
-@@ -90,8 +90,8 @@
-  */
- #define APR_RING_HEAD(head, elem)					\
-     struct head {							\
--	struct elem *next;						\
--	struct elem *prev;						\
-+	struct elem * volatile next;					\
-+	struct elem * volatile prev;					\
-     }
- 
- /**
diff --git a/source/l/apr/apr.url b/source/l/apr/apr.url
new file mode 100644
index 00000000..1ff6c677
--- /dev/null
+++ b/source/l/apr/apr.url
@@ -0,0 +1,2 @@
+http://www.apache.org/dist/apr/apr-1.4.6.tar.bz2
+http://www.apache.org/dist/apr/apr-1.4.6.tar.bz2.asc
diff --git a/source/l/atk/atk.SlackBuild b/source/l/atk/atk.SlackBuild
index f6d41da6..e0671466 100755
--- a/source/l/atk/atk.SlackBuild
+++ b/source/l/atk/atk.SlackBuild
@@ -59,7 +59,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG/usr
 cd $TMP
 rm -rf atk-$VERSION
-tar xvf $CWD/atk-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/atk-$VERSION.tar.xz || exit 1
 cd atk-$VERSION
 chown -R root:root .
 find . \
@@ -82,13 +82,34 @@ make install DESTDIR=$PKG
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-#gzip -9 $PKG/usr/man/man?/*
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/atk-$VERSION
 cp -a \
   AUTHORS COPYING* NEWS README* TODO \
   $PKG/usr/doc/atk-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/attica/attica.SlackBuild b/source/l/attica/attica.SlackBuild
index 3c12a7d5..9b986855 100755
--- a/source/l/attica/attica.SlackBuild
+++ b/source/l/attica/attica.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2009, 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011  Eric Hameleers, Eindhoven, NL
+# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,24 +22,24 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-0.1.4}
+PKGNAM=attica
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:--j6}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-attica
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -49,17 +49,24 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf attica-$VERSION
-tar xvf $CWD/attica-$VERSION.tar.?z* || exit 1
-cd attica-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -87,13 +94,13 @@ cd -
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/attica-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a AUTHORS* COPYING* README* \
-  $PKG/usr/doc/attica-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/attica-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/attica/slack-desc b/source/l/attica/slack-desc
index 40e293f5..18aedb8e 100644
--- a/source/l/attica/slack-desc
+++ b/source/l/attica/slack-desc
@@ -13,7 +13,7 @@ attica: specification for the Open Collaboration Services API version 1.4.
 attica: It grants easy access to the services such as querying information
 attica: about persons and contents.
 attica:
+attica: Homepage: http://www.kde.org
 attica:
 attica:
-attica: Homepage: http://www.kde.org
 attica:
diff --git a/source/l/babl/babl.SlackBuild b/source/l/babl/babl.SlackBuild
index 3f5e6c5d..5f87a951 100755
--- a/source/l/babl/babl.SlackBuild
+++ b/source/l/babl/babl.SlackBuild
@@ -70,15 +70,16 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# I'm not sure about --enable-sse  
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --docdir=/usr/doc/babl-$VERSION \
-  --enable-mmx \
-  --disable-sse \
   --build=$ARCH-slackware-linux
+  # Trust defaults:
+  #--enable-mmx \
+  #--disable-sse \
+  #--enable-introspection \
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG
@@ -91,6 +92,14 @@ cp -a \
   AUTHORS COPYING* INSTALL NEWS README* TODO \
   $PKG/usr/doc/babl-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/boost/boost.SlackBuild b/source/l/boost/boost.SlackBuild
index 3f38c985..006c1897 100755
--- a/source/l/boost/boost.SlackBuild
+++ b/source/l/boost/boost.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2007, 2008 Eric Hameleers, Eindhoven, NL
-# Copyright 2007-2008 Heinz Wiesinger
+# Copyright 2007, 2008, 2012 Eric Hameleers, Eindhoven, NL
+# Copyright 2007-2008, 2012 Heinz Wiesinger, Amsterdam, NL
 # Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
@@ -24,28 +24,29 @@
 
 # bjam-build system mostly taken from SlackBuild by Eric Hameleers
 # Script modified by Robby Workman - no copyright claims or added terms
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
 
 PKGNAM=boost
 VERSION=${VERSION:-$(echo $PKGNAM_*.tar.?z* | rev | cut -f 3- -d . | rev | cut -f 2- -d _)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
+
+ICU=${ICU:-no}
+PKG_VERSION=$(echo $VERSION | tr _ .)	# Leave this alone
+NUMJOBS=${NUMJOBS:-" -j7 "}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-boost
-
-ICU=${ICU:-no}
-PKG_VERSION=$(echo $VERSION | tr _ .)	# Leave this alone
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -55,11 +56,18 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-boost
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -84,28 +92,19 @@ PYTHON_VERSION=$(python -c 'import sys; print sys.version[:3]')
 PYTHON_FLAGS="-sPYTHON_ROOT=/usr -sPYTHON_VERSION=$PYTHON_VERSION"
 
 # First build bjam, the boost build system:
-cd tools/build/v2/engine/src
+cd tools/build/v2/engine
   CFLAGS="$SLKCFLAGS -fno-strict-aliasing" CC=gcc ./build.sh cc
 cd -
 
-BJAM=$(find tools/build/v2/engine/src/ -name bjam -a -type f)
+BJAM=$(find tools/build/v2/engine/ -name bjam -a -type f)
 
 # Create build subdirectory
 mkdir obj
 
-# Change the build options from 'minimal' to what we want, since adding
-# "-sBUILD=<optimization>speed <inlining>full <threading>single/multi
-# <link>shared <runtime-link>shared" to $BJAM command no longer seems to work.
-FLAGS="<threading>multi <threading>single <optimization>speed <inlining>full"
-sed -i "s/    <threading>multi/    $FLAGS/" Jamroot
-# Disable static libraries ( the only software that *requires* the static libs,
-# is Microsoft's CW compiler (CW or Comega is an experimental language which
-# extends C# )
-sed -i "s/<link>shared <link>static/<link>shared/" Jamroot
-
 # Next, we build boost using bjam
 $BJAM \
   release \
+  $NUMJOBS \
   "-sNO_COMPRESSION=0" \
   "-sZLIB_INCLUDE=/usr/include" \
   "-sZLIB_LIBPATH=/usr/lib${LIBDIRSUFFIX}" \
@@ -113,12 +112,16 @@ $BJAM \
   "-sBZIP2_LIBPATH=/usr/lib${LIBDIRSUFFIX}" \
   "-sEXPAT_INCLUDE=/usr/include" \
   "-sEXPAT_LIBPATH=/usr/lib${LIBDIRSUFFIX}" \
-  --toolset=gcc \
   --layout=system \
   --builddir=obj \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --build-type=minimal \
+  toolset=gcc \
+  variant=release \
+  link=shared \
+  threading=multi \
+  runtime-link=shared \
   $PYTHON_FLAGS \
   stage
 
@@ -129,12 +132,16 @@ $BJAM \
   release \
   "-sEXPAT_INCLUDE=/usr/include" \
   "-sEXPAT_LIBPATH=/usr/lib${LIBDIRSUFFIX}" \
-  --toolset=gcc \
   --layout=system \
   --builddir=obj \
   --prefix=$PKG/usr \
   --libdir=$PKG/usr/lib${LIBDIRSUFFIX} \
   --build-type=minimal \
+  toolset=gcc \
+  variant=release \
+  link=shared \
+  threading=multi \
+  runtime-link=shared \
   $PYTHON_FLAGS \
   install
 
diff --git a/source/l/chmlib/slack-desc b/source/l/chmlib/slack-desc
index 9ec72723..8d84d634 100644
--- a/source/l/chmlib/slack-desc
+++ b/source/l/chmlib/slack-desc
@@ -11,7 +11,7 @@ chmlib:
 chmlib: chmlib is a small library designed for accessing MS ITSS files.
 chmlib: The ITSS file format is used for Microsoft Html Help files (.chm), 
 chmlib: which have been the predominant medium for software documentation 
-chmlib: from Microsoft during the past several years, having superceded 
+chmlib: from Microsoft during the past several years, having superseded 
 chmlib: the previously used .hlp file format.
 chmlib:
 chmlib: Homepage:  http://www.jedrea.com/chmlib/
diff --git a/source/l/clucene/clucene.SlackBuild b/source/l/clucene/clucene.SlackBuild
index e72989fa..8600cccf 100755
--- a/source/l/clucene/clucene.SlackBuild
+++ b/source/l/clucene/clucene.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,6 +22,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 # Modified by Robby Workman <rworkman@slackware.com> 
+# Modified by Eric Hameleers <alien@slackware.com> 
 # No added terms or copyright claims
 
 
@@ -29,22 +30,20 @@ PKGNAM=clucene
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-clucene
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -54,17 +53,28 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-clucene
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf clucene-core-$VERSION
-tar xvf $CWD/clucene-core-$VERSION.tar.?z* || exit 1
-cd clucene-core-$VERSION || exit 1
+rm -rf clucene-src-$VERSION
+tar xvf $CWD/clucene-src-$VERSION.tar.?z* || exit 1
+cd clucene-src-$VERSION || exit 1
+
+# Fix the pkgconfig file by adding required shared library.
+cat $CWD/clucene.pkgconfig.patch | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -72,25 +82,27 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --disable-static \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+   make $NUMJOBS || make || exit 1
+   make install DESTDIR=$PKG || exit 1
+cd ..
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
 mkdir -p $PKG/usr/doc/clucene-$VERSION
 cp -a \
-  APACHE.license AUTHORS COPYING* HACKING INSTALL \
+  APACHE.license AUTHORS COPYING* ChangeLog INSTALL \
   LGPL.license NEWS README* REQUESTS \
   $PKG/usr/doc/clucene-$VERSION
 
diff --git a/source/l/clucene/clucene.info b/source/l/clucene/clucene.info
deleted file mode 100644
index 52478e81..00000000
--- a/source/l/clucene/clucene.info
+++ /dev/null
@@ -1,5 +0,0 @@
-PRGNAM="clucene"
-VERSION="0.9.20"
-HOMEPAGE="http://clucene.sourceforge.net"
-DOWNLOAD="http://downloads.sourceforge.net/clucene/clucene-core-0.9.20.tar.bz2"
-MD5SUM="da62da5d23b17fec67f0175481a603b8"
diff --git a/source/l/clucene/clucene.pkgconfig.patch b/source/l/clucene/clucene.pkgconfig.patch
new file mode 100644
index 00000000..61444799
--- /dev/null
+++ b/source/l/clucene/clucene.pkgconfig.patch
@@ -0,0 +1,24 @@
+From 7be4a19b76d98260cf95040a47935f854a4ba7a4 Mon Sep 17 00:00:00 2001
+From: Valentin Rusu <kde@rusu.info>
+Date: Sat, 17 Dec 2011 13:47:58 +0100
+Subject: [PATCH] Fix .pc file by adding clucene-shared library
+
+---
+ src/core/libclucene-core.pc.cmake |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/src/core/libclucene-core.pc.cmake b/src/core/libclucene-core.pc.cmake
+index 0152b25..d421e70 100644
+--- a/src/core/libclucene-core.pc.cmake
++++ b/src/core/libclucene-core.pc.cmake
+@@ -6,6 +6,6 @@ includedir=${prefix}/include:${prefix}/include/CLucene/ext
+ Name: libclucene
+ Description: CLucene - a C++ search engine, ported from the popular Apache Lucene
+ Version: @CLUCENE_VERSION_MAJOR@.@CLUCENE_VERSION_MINOR@.@CLUCENE_VERSION_REVISION@.@CLUCENE_VERSION_PATCH@
+-Libs: -L${prefix}/@LIB_DESTINATION@/ -lclucene-core
++Libs: -L${prefix}/@LIB_DESTINATION@/ -lclucene-core -lclucene-shared
+ Cflags: -I${prefix}/include -I${prefix}/include/CLucene/ext
+ ~
+-- 
+1.7.8
+
diff --git a/source/l/clucene/slack-desc b/source/l/clucene/slack-desc
index 5d1d1a27..4d20e0ad 100644
--- a/source/l/clucene/slack-desc
+++ b/source/l/clucene/slack-desc
@@ -1,3 +1,10 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
        |-----handy-ruler----------------------------------------------------|
 clucene: clucene (Text-Search Engine)
 clucene:
diff --git a/source/l/db44/db44.SlackBuild b/source/l/db44/db44.SlackBuild
index 7d5c49c2..58aa279a 100755
--- a/source/l/db44/db44.SlackBuild
+++ b/source/l/db44/db44.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=4.4.20
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -117,6 +117,14 @@ EOF
   ln -sf db44 db4
 )
 
+# Rename binaries to avoid overlap:
+( cd $PKG/usr/bin
+  mv berkeley_db_svc berkeley_db44_svc
+  for file in db_* ; do
+    mv $file db44_`echo $file | cut -f 2- -d _`
+  done
+)
+
 # Put libdb-4.4.so into /lib${LIBDIRSUFFIX} since it might be needed
 # before /usr is mounted (eg, nsswitch.conf can be set up to
 # use databases instead of flat files)
diff --git a/source/l/db48/db48.SlackBuild b/source/l/db48/db48.SlackBuild
new file mode 100755
index 00000000..2a6c29eb
--- /dev/null
+++ b/source/l/db48/db48.SlackBuild
@@ -0,0 +1,143 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=db48
+VERSION=4.8.30
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf db-$VERSION
+tar xvf $CWD/db-$VERSION.tar.xz
+cd db-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+rm -rf build-dir
+mkdir build-dir
+cd build-dir
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+../dist/configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-shared \
+  --enable-cxx \
+  --enable-compat185 \
+  --disable-test \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make -i install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Remove WAY TOO LARGE (and misplaced) docs:
+# This can be fixed with "docdir=/usr/doc/$PKGNAM-$VERSION" passed to make
+# but there's not really a good reason to do that given they'll be removed
+rm -rf $PKG/usr/docs
+mkdir -p $PKG/usr/doc/db-$VERSION
+cp -a \
+  ../LICENSE ../README \
+  $PKG/usr/doc/db-$VERSION
+cat << EOF > $PKG/usr/doc/db-$VERSION/README-DOCS
+
+  For a ton of additional documentation (too large to include
+  here) on writing source code that uses libdb$PKGNAM, please see
+  the original source tarball db-$VERSION.tar.xz, which can be found
+  on Oracle's web site:
+
+  http://www.oracle.com/technetwork/products/berkeleydb/overview/index.html
+
+EOF
+
+# Move include files:
+( cd $PKG/usr/include
+  mkdir $PKGNAM
+  mv *.h $PKGNAM
+  for file in $PKGNAM/* ; do
+    ln -sf $file .
+  done
+)
+
+# Put libdb-4.8.so into /lib${LIBDIRSUFFIX} since it might be needed
+# before /usr is mounted (eg, nsswitch.conf can be set up to
+# use databases instead of flat files)
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+mv $PKG/usr/lib${LIBDIRSUFFIX}/libdb-4.8.so $PKG/lib${LIBDIRSUFFIX}/libdb-4.8.so
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  ln -sf /lib${LIBDIRSUFFIX}/libdb-4.8.so .
+)
+
+# Some things might look for these libraries by other names.
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  ln -sf libdb-4.8.a libdb-4.a
+  ln -sf libdb-4.8.a libdb4.a
+  ln -sf libdb-4.8.a libdb.a
+  ln -sf libdb_cxx-4.8.a libdb_cxx-4.a
+  ln -sf libdb_cxx-4.8.a libdb_cxx.a
+  ln -sf libdb-4.8.so libdb4.so
+  ln -sf libdb-4.8.so libdb.so
+)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/db48/slack-desc b/source/l/db48/slack-desc
new file mode 100644
index 00000000..e792b860
--- /dev/null
+++ b/source/l/db48/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+db48: db4 (Berkeley database library version 4.8.x)
+db48:
+db48: The Berkeley Database (Berkeley DB) library provides embedded database
+db48: support for both traditional and client/server applications.
+db48:
+db48: This package should be installed if compatibility is needed with
+db48: databases created with the Berkeley DB version 4.8.x.
+db48:
+db48:
+db48:
+db48:
diff --git a/source/l/dbus-glib/dbus-glib.SlackBuild b/source/l/dbus-glib/dbus-glib.SlackBuild
index e0c7d35b..e4dd8b56 100755
--- a/source/l/dbus-glib/dbus-glib.SlackBuild
+++ b/source/l/dbus-glib/dbus-glib.SlackBuild
@@ -87,7 +87,20 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-gzip -9 $PKG/usr/man/man?/*.?
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
@@ -97,6 +110,14 @@ cp -a \
   ln -s ../../share/gtk-doc/html/dbus-glib/ html
 )
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/dbus-python/dbus-python.SlackBuild b/source/l/dbus-python/dbus-python.SlackBuild
index a9ff5e5b..4b3b374b 100755
--- a/source/l/dbus-python/dbus-python.SlackBuild
+++ b/source/l/dbus-python/dbus-python.SlackBuild
@@ -23,8 +23,8 @@
 
 # http://dbus.freedesktop.org/releases/dbus-python/
 
-PRGNAM=dbus-python
-VERSION=${VERSION:-0.83.1}
+PKGNAM=dbus-python
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -41,7 +41,7 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -60,9 +60,9 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP || exit 1
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -77,7 +77,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --localstatedir=/var \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --enable-shared=yes \
   --enable-static=no \
   --build=$ARCH-slackware-linux \
@@ -90,14 +90,22 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING* INSTALL NEWS README* \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild
index 8beccbd5..ef558c65 100755
--- a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild
+++ b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=desktop-file-utils
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/l/djvulibre/djvulibre.SlackBuild b/source/l/djvulibre/djvulibre.SlackBuild
index 373bcc04..9d2f6762 100755
--- a/source/l/djvulibre/djvulibre.SlackBuild
+++ b/source/l/djvulibre/djvulibre.SlackBuild
@@ -57,9 +57,9 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP || exit 1
-rm -rf $PKGNAM-$VERSION
+rm -rf $PKGNAM-$VERSION || rm -rf $PKGNAM-$(echo $VERSION | rev | cut -f 2- -d . | rev)
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
+cd $PKGNAM-$VERSION || cd $PKGNAM-$(echo $VERSION | rev | cut -f 2- -d . | rev) || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -85,6 +85,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --with-qt=/usr/lib${LIBDIRSUFFIX}/qt \
   --build=$ARCH-slackware-linux
 
+make clean || exit 1
 make depend || exit 1
 make || exit 1 # This isn't fully compatible with threaded make
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/ebook-tools/ebook-tools.SlackBuild b/source/l/ebook-tools/ebook-tools.SlackBuild
index 690d71de..162693f9 100755
--- a/source/l/ebook-tools/ebook-tools.SlackBuild
+++ b/source/l/ebook-tools/ebook-tools.SlackBuild
@@ -23,24 +23,20 @@
 
 
 PKGNAM=ebook-tools
-VERSION=${VERSION:-0.1.1}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -53,11 +49,20 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
diff --git a/source/l/ebook-tools/ebook-tools.paths.diff b/source/l/ebook-tools/ebook-tools.paths.diff
index 3752b106..7f857b03 100644
--- a/source/l/ebook-tools/ebook-tools.paths.diff
+++ b/source/l/ebook-tools/ebook-tools.paths.diff
@@ -1,12 +1,10 @@
-diff -ur ebook-tools-0.1.1/src/libepub/CMakeLists.txt ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt
---- ebook-tools-0.1.1/src/libepub/CMakeLists.txt	2008-06-07 20:20:14.000000000 +0100
-+++ ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt	2008-12-15 02:59:58.621077025 +0000
+--- ebook-tools-0.2.1/src/libepub/CMakeLists.txt.orig	2010-09-13 21:31:53.000000000 +0200
++++ ebook-tools-0.2.1/src/libepub/CMakeLists.txt	2010-12-09 14:11:39.751653250 +0100
 @@ -4,5 +4,5 @@
  
- set_target_properties (epub PROPERTIES VERSION 0.1.1 SOVERSION 0)
+ set_target_properties (epub PROPERTIES VERSION 0.2.1 SOVERSION 0)
  
 -install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION lib ARCHIVE DESTINATION lib )
--install ( FILES epub.h epub_shared.h DESTINATION include )
+-install ( FILES epub.h epub_shared.h epub_version.h DESTINATION include )
 +install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION ${LIB_INSTALL_DIR} ARCHIVE DESTINATION ${LIB_INSTALL_DIR} )
-+install ( FILES epub.h epub_shared.h DESTINATION ${INCLUDE_INSTALL_DIR} )
-
++install ( FILES epub.h epub_shared.h epub_version.h DESTINATION ${INCLUDE_INSTALL_DIR} )
diff --git a/source/l/ebook-tools/slack-desc b/source/l/ebook-tools/slack-desc
index abb2ef88..374d507b 100644
--- a/source/l/ebook-tools/slack-desc
+++ b/source/l/ebook-tools/slack-desc
@@ -10,10 +10,10 @@ ebook-tools: ebook-tools (access and convert various ebook file formats)
 ebook-tools:
 ebook-tools: Tools for accessing and converting various ebook file formats. 
 ebook-tools:
+ebook-tools: Home page: http://sourceforge.net/projects/ebook-tools/
 ebook-tools:
 ebook-tools:
 ebook-tools:
 ebook-tools:
 ebook-tools:
-ebook-tools: Home page: http://sourceforge.net/projects/ebook-tools/
 ebook-tools:
diff --git a/source/l/exiv2/exiv2.SlackBuild b/source/l/exiv2/exiv2.SlackBuild
index 6d910a09..6131dc02 100755
--- a/source/l/exiv2/exiv2.SlackBuild
+++ b/source/l/exiv2/exiv2.SlackBuild
@@ -95,16 +95,16 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \
 
 mkdir -p $PKG/usr/doc/exiv2-$VERSION
 cp -a \
-  COPYING* README \
-  doc/{templates,COPYING-XMPSDK,README-XMP,cmd.txt,cmdxmp.txt} \
+  COPYING* README* \
+  doc/{COPYING-XMPSDK,README-XMP,cmd.txt,cmdxmp.txt} \
   $PKG/usr/doc/exiv2-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
+if [ -r doc/ChangeLog ]; then
   DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
+  cat doc/ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r doc/ChangeLog $DOCSDIR/ChangeLog
 fi
 
 mkdir -p $PKG/install
diff --git a/source/l/fftw/slack-desc b/source/l/fftw/slack-desc
index 22a1130c..f1fcfe34 100644
--- a/source/l/fftw/slack-desc
+++ b/source/l/fftw/slack-desc
@@ -12,7 +12,7 @@ fftw: FFTW is a free collection of fast C routines for computing the
 fftw: Discrete Fourier Transform in one or more dimensions.  It includes
 fftw: complex, real, symmetric, and parallel transforms, and can handle
 fftw: arbitrary array sizes efficiently.  FFTW is typically faster than
-fftw: other publically-available FFT implementations, and is even
+fftw: other publicly-available FFT implementations, and is even
 fftw: competitive with vendor-tuned libraries.
 fftw:
 fftw: Homepage: http://www.fftw.org/
diff --git a/source/l/freetype/freetype.SlackBuild b/source/l/freetype/freetype.SlackBuild
index 33b75a97..12735117 100755
--- a/source/l/freetype/freetype.SlackBuild
+++ b/source/l/freetype/freetype.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=freetype
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -59,7 +59,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf freetype-$VERSION
-tar xvf $CWD/freetype-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/freetype-$VERSION.tar.xz || exit 1
 cd freetype-$VERSION
 
 chown -R root:root .
diff --git a/source/l/fribidi/fribidi.SlackBuild b/source/l/fribidi/fribidi.SlackBuild
index 5c8cd086..0d42095a 100755
--- a/source/l/fribidi/fribidi.SlackBuild
+++ b/source/l/fribidi/fribidi.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=fribidi
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -61,6 +61,9 @@ cd $TMP
 rm -rf fribidi-$VERSION
 tar xvf $CWD/fribidi-$VERSION.tar.?z* || exit 1
 cd fribidi-$VERSION
+
+zcat $CWD/fribidi.glib.h.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . -perm 777 -exec chmod 755 {} \;
 find . -perm 775 -exec chmod 755 {} \;
@@ -69,14 +72,35 @@ chown -R root:root .
 CFLAGS="$SLKCFLAGS" \
 ./configure --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --disable-static \
   --with-pic
 make $NUMJOBS || exit 1
 make install DESTDIR=$PKG
+
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 )
-strip -g $PKG/usr/lib/libfribidi.a
+
+# Remove any zero length man pages:
+find $PKG/usr/man/ -type f -empty -delete
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 mkdir -p $PKG/usr/doc/fribidi-$VERSION
 cp -a \
   AUTHORS COPYING* NEWS README* THANKS TODO \
diff --git a/source/l/fribidi/fribidi.glib.h.diff b/source/l/fribidi/fribidi.glib.h.diff
new file mode 100644
index 00000000..34caeb69
--- /dev/null
+++ b/source/l/fribidi/fribidi.glib.h.diff
@@ -0,0 +1,76 @@
+diff -u -r fribidi-0.19.2.orig/charset/fribidi-char-sets.c fribidi-0.19.2/charset/fribidi-char-sets.c
+--- fribidi-0.19.2.orig/charset/fribidi-char-sets.c	2006-01-30 21:23:12.000000000 -0600
++++ fribidi-0.19.2/charset/fribidi-char-sets.c	2012-07-17 23:14:53.602120679 -0500
+@@ -114,7 +114,7 @@
+ };
+ 
+ #if FRIBIDI_USE_GLIB+0
+-# include <glib/gstrfuncs.h>
++# include <glib.h>
+ # define fribidi_strcasecmp g_ascii_strcasecmp
+ #else /* !FRIBIDI_USE_GLIB */
+ static char
+diff -u -r fribidi-0.19.2.orig/lib/common.h fribidi-0.19.2/lib/common.h
+--- fribidi-0.19.2.orig/lib/common.h	2008-04-08 16:38:23.000000000 -0500
++++ fribidi-0.19.2/lib/common.h	2012-07-17 23:15:14.106120553 -0500
+@@ -57,7 +57,7 @@
+ #  define SIZEOF_VOID_P GLIB_SIZEOF_VOID_P
+ # endif	/* !SIZEOF_VOID_P */
+ # ifndef __FRIBIDI_DOC
+-#  include <glib/gmem.h>
++#  include <glib.h>
+ # endif	/* !__FRIBIDI_DOC */
+ # ifndef fribidi_malloc
+ #  define fribidi_malloc g_try_malloc
+@@ -65,12 +65,12 @@
+ # endif	/* !fribidi_malloc */
+ # ifndef fribidi_assert
+ #  ifndef __FRIBIDI_DOC
+-#   include <glib/gmessages.h>
++#   include <glib.h>
+ #  endif /* !__FRIBIDI_DOC */
+ #  define fribidi_assert g_assert
+ # endif	/* !fribidi_assert */
+ # ifndef __FRIBIDI_DOC
+-#  include <glib/gmacros.h>
++#  include <glib.h>
+ # endif	/* !__FRIBIDI_DOC */
+ # ifndef FRIBIDI_BEGIN_STMT
+ #  define FRIBIDI_BEGIN_STMT G_STMT_START {
+diff -u -r fribidi-0.19.2.orig/lib/fribidi-common.h fribidi-0.19.2/lib/fribidi-common.h
+--- fribidi-0.19.2.orig/lib/fribidi-common.h	2007-04-05 11:13:24.000000000 -0500
++++ fribidi-0.19.2/lib/fribidi-common.h	2012-07-17 23:15:30.546121341 -0500
+@@ -62,7 +62,7 @@
+ 
+ #if FRIBIDI_USE_GLIB+0
+ # ifndef __FRIBIDI_DOC
+-#  include <glib/gmacros.h>
++#  include <glib.h>
+ # endif	/* !__FRIBIDI_DOC */
+ # define FRIBIDI_BEGIN_DECLS		G_BEGIN_DECLS
+ # define FRIBIDI_END_DECLS		G_END_DECLS
+diff -u -r fribidi-0.19.2.orig/lib/fribidi-types.h fribidi-0.19.2/lib/fribidi-types.h
+--- fribidi-0.19.2.orig/lib/fribidi-types.h	2006-01-30 21:23:13.000000000 -0600
++++ fribidi-0.19.2/lib/fribidi-types.h	2012-07-17 23:16:00.010122775 -0500
+@@ -40,8 +40,7 @@
+ 
+ #if FRIBIDI_USE_GLIB+0
+ # ifndef __FRIBIDI_DOC
+-#  include <glib/gtypes.h>
+-#  include <glib/gunicode.h>
++#  include <glib.h>
+ # endif	/* !__FRIBIDI_DOC */
+ # define FRIBIDI_INT8_LOCAL		gint8
+ # define FRIBIDI_INT16_LOCAL		gint16
+diff -u -r fribidi-0.19.2.orig/lib/mem.h fribidi-0.19.2/lib/mem.h
+--- fribidi-0.19.2.orig/lib/mem.h	2006-01-30 21:23:13.000000000 -0600
++++ fribidi-0.19.2/lib/mem.h	2012-07-17 23:15:43.522121977 -0500
+@@ -42,7 +42,7 @@
+ #if FRIBIDI_USE_GLIB+0
+ 
+ #ifndef __FRIBIDI_DOC
+-# include <glib/gmem.h>
++# include <glib.h>
+ #endif /* !__FRIBIDI_DOC */
+ 
+ #define FriBidiMemChunk GMemChunk
diff --git a/source/l/gamin/fix-double-lock-in-inotify-helper-c.patch b/source/l/gamin/fix-double-lock-in-inotify-helper-c.patch
new file mode 100644
index 00000000..8d2ef2d3
--- /dev/null
+++ b/source/l/gamin/fix-double-lock-in-inotify-helper-c.patch
@@ -0,0 +1,21 @@
+diff -rupN gamin-0.1.10/server/inotify-helper.c gamin-0.1.10-new/server/inotify-helper.c
+--- gamin-0.1.10/server/inotify-helper.c	2008-11-12 21:45:28.000000000 +0100
++++ gamin-0.1.10-new/server/inotify-helper.c	2012-02-02 23:11:47.247757385 +0100
+@@ -127,9 +127,6 @@ ih_sub_add (ih_sub_t * sub)
+ gboolean
+ ih_sub_cancel (ih_sub_t * sub)
+ {
+-	G_LOCK(inotify_lock);
+-
+-
+ 	if (!sub->cancelled)
+ 	{
+ 		IH_W("cancelling %s\n", sub->pathname);
+@@ -140,7 +137,6 @@ ih_sub_cancel (ih_sub_t * sub)
+ 		sub_list = g_list_remove (sub_list, sub);
+ 	}
+ 
+-	G_UNLOCK(inotify_lock);
+ 	return TRUE;
+ }
+ 
diff --git a/source/l/gamin/gamin.SlackBuild b/source/l/gamin/gamin.SlackBuild
index 9eb37919..fb51e925 100755
--- a/source/l/gamin/gamin.SlackBuild
+++ b/source/l/gamin/gamin.SlackBuild
@@ -24,7 +24,7 @@
 
 PKGNAM=gamin
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -62,7 +62,7 @@ mkdir -p $TMP $PKG
 cd $TMP 
 rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -70,6 +70,12 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# https://bugzilla.redhat.com/show_bug.cgi?id=786170
+zcat $CWD/fix-double-lock-in-inotify-helper-c.patch.gz | patch -p1 --verbose || exit 1
+
+# Fix a build error with newer toolchain
+zcat $CWD/no_g_const_return.patch.gz | patch -p1 --verbose || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
diff --git a/source/l/gamin/no_g_const_return.patch b/source/l/gamin/no_g_const_return.patch
new file mode 100644
index 00000000..f8430a79
--- /dev/null
+++ b/source/l/gamin/no_g_const_return.patch
@@ -0,0 +1,44 @@
+--- ./server/gam_node.h.orig	2007-07-04 15:36:49.000000000 +0200
++++ ./server/gam_node.h	2011-08-26 01:49:59.504423790 +0200
+@@ -58,7 +58,7 @@
+ void                  gam_node_set_is_dir          (GamNode         *node,
+ 						   gboolean        is_dir);
+ 	
+-G_CONST_RETURN char  *gam_node_get_path            (GamNode         *node);
++const char  *gam_node_get_path            (GamNode         *node);
+ 
+ GList                *gam_node_get_subscriptions   (GamNode         *node);
+ 
+--- ./server/gam_subscription.h.orig	2007-07-04 15:36:49.000000000 +0200
++++ ./server/gam_subscription.h	2011-08-26 01:49:59.504423790 +0200
+@@ -21,7 +21,7 @@
+ 
+ int                  gam_subscription_get_reqno    (GamSubscription *sub);
+ 
+-G_CONST_RETURN char *gam_subscription_get_path     (GamSubscription *sub);
++const char *gam_subscription_get_path     (GamSubscription *sub);
+ 
+ GamListener         *gam_subscription_get_listener (GamSubscription *sub);
+ 
+--- ./server/gam_node.c.orig	2007-07-04 15:36:49.000000000 +0200
++++ ./server/gam_node.c	2011-08-26 01:49:59.504423790 +0200
+@@ -122,7 +122,7 @@
+  * it has finished with the string.  If it must keep it longer, it
+  * should makes its own copy.  The returned string must not be freed.
+  */
+-G_CONST_RETURN char *
++const char *
+ gam_node_get_path(GamNode * node)
+ {
+     g_assert(node);
+--- ./server/gam_subscription.c.orig	2007-07-04 15:36:49.000000000 +0200
++++ ./server/gam_subscription.c	2011-08-26 01:49:59.504423790 +0200
+@@ -141,7 +141,7 @@
+  * @param sub the GamSubscription
+  * @returns The path being monitored.  It should not be freed.
+  */
+-G_CONST_RETURN char *
++const char *
+ gam_subscription_get_path(GamSubscription * sub)
+ {
+     if (sub == NULL)
diff --git a/source/l/gcr/doinst.sh b/source/l/gcr/doinst.sh
new file mode 100644
index 00000000..e9e23592
--- /dev/null
+++ b/source/l/gcr/doinst.sh
@@ -0,0 +1,20 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x /usr/bin/update-mime-database ]; then
+  /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x usr/bin/gtk-update-icon-cache ]; then
+    chroot . /usr/bin/gtk-update-icon-cache /usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
+if [ -e usr/share/glib-2.0/schemas ]; then
+  if [ -x /usr/bin/glib-compile-schemas ]; then
+    /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/l/gcr/gcr.SlackBuild b/source/l/gcr/gcr.SlackBuild
new file mode 100755
index 00000000..f46e43aa
--- /dev/null
+++ b/source/l/gcr/gcr.SlackBuild
@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Slackware build script for gcr
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gcr
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-schemas-compile \
+  --disable-update-mime \
+  --disable-update-icon-cache \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/gcr/slack-desc b/source/l/gcr/slack-desc
new file mode 100644
index 00000000..2cddcf47
--- /dev/null
+++ b/source/l/gcr/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+   |-----handy-ruler------------------------------------------------------|
+gcr: gcr (crypto library and ui for gnome-keyring)
+gcr:
+gcr: GCR is a library for displaying certificates and crypto UI accessing
+gcr: key stores. It also provides the viewer for crypto files on the GNOME
+gcr: desktop.
+gcr:
+gcr: GCK is a library for accessing PKCS#11 modules like smart cards, in a
+gcr: (G)object oriented way.
+gcr:
+gcr:
+gcr:
diff --git a/source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild b/source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild
index 3978a04b..4f4c1f44 100755
--- a/source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild
+++ b/source/l/gdk-pixbuf2/gdk-pixbuf2.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for gdk-pixbuf
 
-# Copyright 2010  Robby Workman, Northport, Alabama, USA
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
 # Copyright 2010, 2011  Patrick Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
@@ -25,7 +25,7 @@
 
 PKGNAM=gdk-pixbuf
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -83,7 +83,8 @@ CXXFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --disable-introspection \
+  --enable-introspection \
+  --with-x11 \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -115,14 +116,34 @@ chmod 0755 $PKG/usr/bin/update-gdk-pixbuf-loaders
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING* INSTALL NEWS README* \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders b/source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders
index b19d3680..5848db83 100644
--- a/source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders
+++ b/source/l/gdk-pixbuf2/update-gdk-pixbuf-loaders
@@ -21,6 +21,10 @@ case "$host" in
      /usr/bin/gdk-pixbuf-query-loaders-64 --update-cache
      # Check for x86_64 multilib:
      if ls -d /etc/gtk-2.0/i?86* 1> /dev/null 2> /dev/null ; then
+       for d in $(ls -d /etc/pango/i?86*); do
+         mlhost=$(basename $d)
+         break
+       done
        if [ -x /usr/bin/gdk-pixbuf-query-loaders-32 ]; then
          if [ "$1" = "--verbose" ]; then
            echo "Updating gdk-pixbuf.loaders for ${mlhost}:"
diff --git a/source/l/gegl/gegl.SlackBuild b/source/l/gegl/gegl.SlackBuild
index d0d29911..5cf8e63b 100755
--- a/source/l/gegl/gegl.SlackBuild
+++ b/source/l/gegl/gegl.SlackBuild
@@ -68,7 +68,6 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# I'm not sure about --enable-sse  
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -76,10 +75,12 @@ CFLAGS="$SLKCFLAGS" \
   --docdir=/usr/doc/gegl-$VERSION \
   --enable-gtk-doc \
   --disable-docs \
-  --enable-mmx \
-  --disable-sse \
   --build=$ARCH-slackware-linux || exit 1
 
+# Trust defaults:
+#  --enable-mmx \
+#  --disable-sse \
+
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
diff --git a/source/l/gegl/slack-desc b/source/l/gegl/slack-desc
index 0d7e598b..75eea8ad 100644
--- a/source/l/gegl/slack-desc
+++ b/source/l/gegl/slack-desc
@@ -11,7 +11,7 @@ gegl:
 gegl: GEGL (Generic Graphics Library) is a graph based image processing
 gegl: framework.
 gegl: 
-gegl: GEGL provides infratructure to do demand based cached non destructive
+gegl: GEGL provides infrastructure to do demand based cached non destructive
 gegl: image editing on larger than RAM buffers. Through babl it provides
 gegl: support for a wide range of color models and pixel storage formats for
 gegl: input and output.
diff --git a/source/l/glade3/glade3.SlackBuild b/source/l/glade3/glade3.SlackBuild
new file mode 100755
index 00000000..02af4f3d
--- /dev/null
+++ b/source/l/glade3/glade3.SlackBuild
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Slackware build script for glade3
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=glade3
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-scrollkeeper \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/glade3/slack-desc b/source/l/glade3/slack-desc
new file mode 100644
index 00000000..f31e2ebe
--- /dev/null
+++ b/source/l/glade3/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+glade3: glade3 (Glade UI Designer version 3)
+glade3:
+glade3: Glade is a RAD tool to enable quick and easy development of user
+glade3: interfaces for the GTK+ toolkit and the GNOME desktop environment.
+glade3: The user interfaces designed in Glade are saved as XML, and by using
+glade3: the GtkBuilder GTK+ object these can be loaded by applications
+glade3: dynamically as needed.
+glade3:
+glade3: Homepage: http://glade.gnome.org/
+glade3:
+glade3:
diff --git a/source/l/glib-networking/doinst.sh b/source/l/glib-networking/doinst.sh
new file mode 100644
index 00000000..f5c4850f
--- /dev/null
+++ b/source/l/glib-networking/doinst.sh
@@ -0,0 +1,4 @@
+if [ -x /usr/bin/gio-querymodules ]; then
+  chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ >/dev/null 2>&1
+fi
+
diff --git a/source/l/glib-networking/glib-networking.SlackBuild b/source/l/glib-networking/glib-networking.SlackBuild
new file mode 100755
index 00000000..7281774e
--- /dev/null
+++ b/source/l/glib-networking/glib-networking.SlackBuild
@@ -0,0 +1,121 @@
+#!/bin/sh
+
+# Slackware build script for glib-networking
+
+# Copyright 2011, 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=glib-networking
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --enable-static=no \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/glib-networking/slack-desc b/source/l/glib-networking/slack-desc
new file mode 100644
index 00000000..d06e6925
--- /dev/null
+++ b/source/l/glib-networking/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+               |-----handy-ruler------------------------------------------------------|
+glib-networking: glib-networking (network-related giomodules for glib)
+glib-networking:
+glib-networking: This package contains network-related giomodules for glib.
+glib-networking:
+glib-networking:
+glib-networking:
+glib-networking:
+glib-networking:
+glib-networking:
+glib-networking:
+glib-networking:
diff --git a/source/l/glib2/doinst.sh b/source/l/glib2/doinst.sh
index 95b61fff..a14f9606 100644
--- a/source/l/glib2/doinst.sh
+++ b/source/l/glib2/doinst.sh
@@ -26,6 +26,7 @@ for file in etc/profile.d/libglib2.csh.new etc/profile.d/libglib2.sh.new ; do
   config $file
 done
 
-# Try to run this.  If it fails, no biggie.
+# Try to run these.  If they fail, no biggie.
 chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 1> /dev/null 2> /dev/null
+chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ 1> /dev/null 2> /dev/null
 
diff --git a/source/l/glib2/glib2.SlackBuild b/source/l/glib2/glib2.SlackBuild
index 2cf57f5e..09e453e6 100755
--- a/source/l/glib2/glib2.SlackBuild
+++ b/source/l/glib2/glib2.SlackBuild
@@ -90,10 +90,20 @@ mv $PKG/etc/profile.d/libglib2.sh $PKG/etc/profile.d/libglib2.sh.new
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/glib-$VERSION
 cp -a \
@@ -111,7 +121,7 @@ fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n --prepend $TMP/glib2-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/glibc/doinst.sh-glibc b/source/l/glibc/doinst.sh-glibc
index 427723c2..1b3e03e3 100644
--- a/source/l/glibc/doinst.sh-glibc
+++ b/source/l/glibc/doinst.sh-glibc
@@ -111,43 +111,43 @@ rm -f etc/profile.d/glibc.sh.new
 # In case there's no ldconfig, make the links manually:
 if [ ! -x /sbin/ldconfig ]; then
 ( cd lib ; rm -rf libnss_nis.so.2 )
-( cd lib ; ln -sf libnss_nis-2.13.so libnss_nis.so.2 )
+( cd lib ; ln -sf libnss_nis-2.15.so libnss_nis.so.2 )
 ( cd lib ; rm -rf libm.so.6 )
-( cd lib ; ln -sf libm-2.13.so libm.so.6 )
+( cd lib ; ln -sf libm-2.15.so libm.so.6 )
 ( cd lib ; rm -rf libnss_files.so.2 )
-( cd lib ; ln -sf libnss_files-2.13.so libnss_files.so.2 )
+( cd lib ; ln -sf libnss_files-2.15.so libnss_files.so.2 )
 ( cd lib ; rm -rf libresolv.so.2 )
-( cd lib ; ln -sf libresolv-2.13.so libresolv.so.2 )
+( cd lib ; ln -sf libresolv-2.15.so libresolv.so.2 )
 ( cd lib ; rm -rf libnsl.so.1 )
-( cd lib ; ln -sf libnsl-2.13.so libnsl.so.1 )
+( cd lib ; ln -sf libnsl-2.15.so libnsl.so.1 )
 ( cd lib ; rm -rf libutil.so.1 )
-( cd lib ; ln -sf libutil-2.13.so libutil.so.1 )
+( cd lib ; ln -sf libutil-2.15.so libutil.so.1 )
 ( cd lib ; rm -rf libnss_compat.so.2 )
-( cd lib ; ln -sf libnss_compat-2.13.so libnss_compat.so.2 )
+( cd lib ; ln -sf libnss_compat-2.15.so libnss_compat.so.2 )
 ( cd lib ; rm -rf libthread_db.so.1 )
 ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
 ( cd lib ; rm -rf libnss_hesiod.so.2 )
-( cd lib ; ln -sf libnss_hesiod-2.13.so libnss_hesiod.so.2 )
+( cd lib ; ln -sf libnss_hesiod-2.15.so libnss_hesiod.so.2 )
 ( cd lib ; rm -rf libanl.so.1 )
-( cd lib ; ln -sf libanl-2.13.so libanl.so.1 )
+( cd lib ; ln -sf libanl-2.15.so libanl.so.1 )
 ( cd lib ; rm -rf libcrypt.so.1 )
-( cd lib ; ln -sf libcrypt-2.13.so libcrypt.so.1 )
+( cd lib ; ln -sf libcrypt-2.15.so libcrypt.so.1 )
 ( cd lib ; rm -rf libBrokenLocale.so.1 )
-( cd lib ; ln -sf libBrokenLocale-2.13.so libBrokenLocale.so.1 )
+( cd lib ; ln -sf libBrokenLocale-2.15.so libBrokenLocale.so.1 )
 ( cd lib ; rm -rf ld-linux.so.2 )
-( cd lib ; ln -sf ld-2.13.so ld-linux.so.2 )
+( cd lib ; ln -sf ld-2.15.so ld-linux.so.2 )
 ( cd lib ; rm -rf libdl.so.2 )
-( cd lib ; ln -sf libdl-2.13.so libdl.so.2 )
+( cd lib ; ln -sf libdl-2.15.so libdl.so.2 )
 ( cd lib ; rm -rf libnss_dns.so.2 )
-( cd lib ; ln -sf libnss_dns-2.13.so libnss_dns.so.2 )
+( cd lib ; ln -sf libnss_dns-2.15.so libnss_dns.so.2 )
 ( cd lib ; rm -rf libpthread.so.0 )
-( cd lib ; ln -sf libpthread-2.13.so libpthread.so.0 )
+( cd lib ; ln -sf libpthread-2.15.so libpthread.so.0 )
 ( cd lib ; rm -rf libnss_nisplus.so.2 )
-( cd lib ; ln -sf libnss_nisplus-2.13.so libnss_nisplus.so.2 )
+( cd lib ; ln -sf libnss_nisplus-2.15.so libnss_nisplus.so.2 )
 ( cd lib ; rm -rf libc.so.6 )
-( cd lib ; ln -sf libc-2.13.so libc.so.6 )
+( cd lib ; ln -sf libc-2.15.so libc.so.6 )
 ( cd lib ; rm -rf librt.so.1 )
-( cd lib ; ln -sf librt-2.13.so librt.so.1 )
+( cd lib ; ln -sf librt-2.15.so librt.so.1 )
 fi
 
 # More links:
diff --git a/source/l/glibc/doinst.sh-glibc-solibs b/source/l/glibc/doinst.sh-glibc-solibs
index adcb4131..f6e41a96 100644
--- a/source/l/glibc/doinst.sh-glibc-solibs
+++ b/source/l/glibc/doinst.sh-glibc-solibs
@@ -91,41 +91,41 @@ rm -f etc/profile.d/glibc.sh.new
 # In case there's no ldconfig, make the links manually:
 if [ ! -x /sbin/ldconfig ]; then
 ( cd lib ; rm -rf libnss_nis.so.2 )
-( cd lib ; ln -sf libnss_nis-2.13.so libnss_nis.so.2 )
+( cd lib ; ln -sf libnss_nis-2.15.so libnss_nis.so.2 )
 ( cd lib ; rm -rf libm.so.6 )
-( cd lib ; ln -sf libm-2.13.so libm.so.6 )
+( cd lib ; ln -sf libm-2.15.so libm.so.6 )
 ( cd lib ; rm -rf libnss_files.so.2 )
-( cd lib ; ln -sf libnss_files-2.13.so libnss_files.so.2 )
+( cd lib ; ln -sf libnss_files-2.15.so libnss_files.so.2 )
 ( cd lib ; rm -rf libresolv.so.2 )
-( cd lib ; ln -sf libresolv-2.13.so libresolv.so.2 )
+( cd lib ; ln -sf libresolv-2.15.so libresolv.so.2 )
 ( cd lib ; rm -rf libnsl.so.1 )
-( cd lib ; ln -sf libnsl-2.13.so libnsl.so.1 )
+( cd lib ; ln -sf libnsl-2.15.so libnsl.so.1 )
 ( cd lib ; rm -rf libutil.so.1 )
-( cd lib ; ln -sf libutil-2.13.so libutil.so.1 )
+( cd lib ; ln -sf libutil-2.15.so libutil.so.1 )
 ( cd lib ; rm -rf libnss_compat.so.2 )
-( cd lib ; ln -sf libnss_compat-2.13.so libnss_compat.so.2 )
+( cd lib ; ln -sf libnss_compat-2.15.so libnss_compat.so.2 )
 ( cd lib ; rm -rf libthread_db.so.1 )
 ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
 ( cd lib ; rm -rf libnss_hesiod.so.2 )
-( cd lib ; ln -sf libnss_hesiod-2.13.so libnss_hesiod.so.2 )
+( cd lib ; ln -sf libnss_hesiod-2.15.so libnss_hesiod.so.2 )
 ( cd lib ; rm -rf libanl.so.1 )
-( cd lib ; ln -sf libanl-2.13.so libanl.so.1 )
+( cd lib ; ln -sf libanl-2.15.so libanl.so.1 )
 ( cd lib ; rm -rf libcrypt.so.1 )
-( cd lib ; ln -sf libcrypt-2.13.so libcrypt.so.1 )
+( cd lib ; ln -sf libcrypt-2.15.so libcrypt.so.1 )
 ( cd lib ; rm -rf libBrokenLocale.so.1 )
-( cd lib ; ln -sf libBrokenLocale-2.13.so libBrokenLocale.so.1 )
+( cd lib ; ln -sf libBrokenLocale-2.15.so libBrokenLocale.so.1 )
 ( cd lib ; rm -rf ld-linux.so.2 )
-( cd lib ; ln -sf ld-2.13.so ld-linux.so.2 )
+( cd lib ; ln -sf ld-2.15.so ld-linux.so.2 )
 ( cd lib ; rm -rf libdl.so.2 )
-( cd lib ; ln -sf libdl-2.13.so libdl.so.2 )
+( cd lib ; ln -sf libdl-2.15.so libdl.so.2 )
 ( cd lib ; rm -rf libnss_dns.so.2 )
-( cd lib ; ln -sf libnss_dns-2.13.so libnss_dns.so.2 )
+( cd lib ; ln -sf libnss_dns-2.15.so libnss_dns.so.2 )
 ( cd lib ; rm -rf libpthread.so.0 )
-( cd lib ; ln -sf libpthread-2.13.so libpthread.so.0 )
+( cd lib ; ln -sf libpthread-2.15.so libpthread.so.0 )
 ( cd lib ; rm -rf libnss_nisplus.so.2 )
-( cd lib ; ln -sf libnss_nisplus-2.13.so libnss_nisplus.so.2 )
+( cd lib ; ln -sf libnss_nisplus-2.15.so libnss_nisplus.so.2 )
 ( cd lib ; rm -rf libc.so.6 )
-( cd lib ; ln -sf libc-2.13.so libc.so.6 )
+( cd lib ; ln -sf libc-2.15.so libc.so.6 )
 ( cd lib ; rm -rf librt.so.1 )
-( cd lib ; ln -sf librt-2.13.so librt.so.1 )
+( cd lib ; ln -sf librt-2.15.so librt.so.1 )
 fi
diff --git a/source/l/glibc/glibc-2.14-reexport-rpc-interface.patch b/source/l/glibc/glibc-2.14-reexport-rpc-interface.patch
new file mode 100644
index 00000000..a0a38162
--- /dev/null
+++ b/source/l/glibc/glibc-2.14-reexport-rpc-interface.patch
@@ -0,0 +1,26 @@
+diff --git a/include/libc-symbols.h b/include/libc-symbols.h
+index 67e1ca2..5e7cca5 100644
+--- a/include/libc-symbols.h
++++ b/include/libc-symbols.h
+@@ -635,7 +635,7 @@ for linking")
+ # define libc_hidden_proto(name, attrs...) hidden_proto (name, ##attrs)
+ # define libc_hidden_def(name) hidden_def (name)
+ # define libc_hidden_weak(name) hidden_weak (name)
+-# define libc_hidden_nolink(name, version) hidden_nolink (name, libc, version)
++# define libc_hidden_nolink(name, version) hidden_def (name)
+ # define libc_hidden_ver(local, name) hidden_ver (local, name)
+ # define libc_hidden_data_def(name) hidden_data_def (name)
+ # define libc_hidden_data_weak(name) hidden_data_weak (name)
+diff --git a/sunrpc/Makefile b/sunrpc/Makefile
+index 5134ce9..40c73d1 100644
+--- a/sunrpc/Makefile
++++ b/sunrpc/Makefile
+@@ -53,7 +53,7 @@ headers-in-tirpc = $(addprefix rpc/,auth.h auth_unix.h clnt.h pmap_clnt.h \
+ 				    des_crypt.h)
+ headers-not-in-tirpc = $(addprefix rpc/,key_prot.h rpc_des.h) \
+ 		       $(rpcsvc:%=rpcsvc/%) rpcsvc/bootparam.h
+-headers = rpc/netdb.h
++headers = rpc/netdb.h $(headers-in-tirpc) $(headers-not-in-tirpc)
+ install-others = $(inst_sysconfdir)/rpc
+ generated = $(rpcsvc:%.x=rpcsvc/%.h) $(rpcsvc:%.x=x%.c) $(rpcsvc:%.x=x%.stmp) \
+ 	    $(rpcsvc:%.x=rpcsvc/%.stmp) rpcgen
\ No newline at end of file
diff --git a/source/l/glibc/glibc-2.14-reinstall-nis-rpc-headers.patch b/source/l/glibc/glibc-2.14-reinstall-nis-rpc-headers.patch
new file mode 100644
index 00000000..554b9e56
--- /dev/null
+++ b/source/l/glibc/glibc-2.14-reinstall-nis-rpc-headers.patch
@@ -0,0 +1,27 @@
+From bdd816a366c4e5bba5de7157d948e0c0737fb4fb Mon Sep 17 00:00:00 2001
+From: Andreas Schwab <schwab@redhat.com>
+Date: Tue, 17 May 2011 17:42:30 +0200
+Subject: [PATCH] Reinstall NIS RPC headers
+
+---
+ nis/Makefile |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/nis/Makefile b/nis/Makefile
+index b5c9609..d2934d9 100644
+--- a/nis/Makefile
++++ b/nis/Makefile
+@@ -23,9 +23,9 @@ subdir	:= nis
+ 
+ aux			:= nis_hash
+ 
++headers			:= $(wildcard rpcsvc/*.[hx])
+ distribute		:= nss-nis.h nss-nisplus.h nis_intern.h Banner \
+-			   nisplus-parser.h nis_xdr.h nss \
+-			   $(wildcard rpcsvc/*.[hx])
++			   nisplus-parser.h nis_xdr.h nss
+ 
+ # These are the databases available for the nis (and perhaps later nisplus)
+ # service.  This must be a superset of the services in nss.
+-- 
+1.7.5.4
diff --git a/source/l/glibc/glibc-2.14.1-fixes-1.patch b/source/l/glibc/glibc-2.14.1-fixes-1.patch
new file mode 100644
index 00000000..b2b87f12
--- /dev/null
+++ b/source/l/glibc/glibc-2.14.1-fixes-1.patch
@@ -0,0 +1,159 @@
+Submitted By:            Matt Burgess <matthew_at_linuxfromscratch_dot_org>
+Date:                    2011-10-07
+Initial Package Version: 2.14.1
+Upstream Status:         From upstream
+Origin:                  Matt Burgess
+Description:             Fixes Firefox crashes and a bug when programs link to
+                         SDL.
+
+diff -Naur glibc-2.14.1.orig/elf/dl-close.c glibc-2.14.1/elf/dl-close.c
+--- glibc-2.14.1.orig/elf/dl-close.c	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/elf/dl-close.c	2011-10-07 19:43:10.346411120 +0000
+@@ -119,17 +119,8 @@
+   if (map->l_direct_opencount > 0 || map->l_type != lt_loaded
+       || dl_close_state != not_pending)
+     {
+-      if (map->l_direct_opencount == 0)
+-	{
+-	  if (map->l_type == lt_loaded)
+-	    dl_close_state = rerun;
+-	  else if (map->l_type == lt_library)
+-	    {
+-	      struct link_map **oldp = map->l_initfini;
+-	      map->l_initfini = map->l_orig_initfini;
+-	      _dl_scope_free (oldp);
+-	    }
+-	}
++      if (map->l_direct_opencount == 0 && map->l_type == lt_loaded)
++	dl_close_state = rerun;
+ 
+       /* There are still references to this object.  Do nothing more.  */
+       if (__builtin_expect (GLRO(dl_debug_mask) & DL_DEBUG_FILES, 0))
+diff -Naur glibc-2.14.1.orig/elf/dl-deps.c glibc-2.14.1/elf/dl-deps.c
+--- glibc-2.14.1.orig/elf/dl-deps.c	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/elf/dl-deps.c	2011-10-07 19:43:10.348432639 +0000
+@@ -478,6 +478,7 @@
+ 		  nneeded * sizeof needed[0]);
+ 	  atomic_write_barrier ();
+ 	  l->l_initfini = l_initfini;
++	  l->l_free_initfini = 1;
+ 	}
+ 
+       /* If we have no auxiliary objects just go on to the next map.  */
+@@ -678,6 +679,7 @@
+   l_initfini[nlist] = NULL;
+   atomic_write_barrier ();
+   map->l_initfini = l_initfini;
++  map->l_free_initfini = 1;
+   if (l_reldeps != NULL)
+     {
+       atomic_write_barrier ();
+@@ -686,7 +688,7 @@
+       _dl_scope_free (old_l_reldeps);
+     }
+   if (old_l_initfini != NULL)
+-      map->l_orig_initfini = old_l_initfini;
++    _dl_scope_free (old_l_initfini);
+ 
+   if (errno_reason)
+     _dl_signal_error (errno_reason == -1 ? 0 : errno_reason, objname,
+diff -Naur glibc-2.14.1.orig/elf/dl-libc.c glibc-2.14.1/elf/dl-libc.c
+--- glibc-2.14.1.orig/elf/dl-libc.c	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/elf/dl-libc.c	2011-10-07 19:43:10.352411141 +0000
+@@ -279,6 +279,10 @@
+ 	      if (! old->dont_free)
+ 		free (old);
+ 	    }
++
++	  /* Free the initfini dependency list.  */
++	  if (l->l_free_initfini)
++	    free (l->l_initfini);
+ 	}
+ 
+       if (__builtin_expect (GL(dl_ns)[ns]._ns_global_scope_alloc, 0) != 0
+diff -Naur glibc-2.14.1.orig/elf/rtld.c glibc-2.14.1/elf/rtld.c
+--- glibc-2.14.1.orig/elf/rtld.c	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/elf/rtld.c	2011-10-07 19:43:10.355406263 +0000
+@@ -2263,6 +2263,7 @@
+ 	      lnp->dont_free = 1;
+ 	      lnp = lnp->next;
+ 	    }
++	  l->l_free_initfini = 0;
+ 
+ 	  if (l != &GL(dl_rtld_map))
+ 	    _dl_relocate_object (l, l->l_scope, GLRO(dl_lazy) ? RTLD_LAZY : 0,
+diff -Naur glibc-2.14.1.orig/include/link.h glibc-2.14.1/include/link.h
+--- glibc-2.14.1.orig/include/link.h	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/include/link.h	2011-10-07 19:43:10.357462703 +0000
+@@ -192,6 +192,9 @@
+ 						 during LD_TRACE_PRELINKING=1
+ 						 contains any DT_SYMBOLIC
+ 						 libraries.  */
++    unsigned int l_free_initfini:1; /* Nonzero if l_initfini can be
++				       freed, ie. not allocated with
++				       the dummy malloc in ld.so.  */
+ 
+     /* Collected information about own RPATH directories.  */
+     struct r_search_path_struct l_rpath_dirs;
+@@ -240,9 +243,6 @@
+ 
+     /* List of object in order of the init and fini calls.  */
+     struct link_map **l_initfini;
+-    /* The init and fini list generated at startup, saved when the
+-       object is also loaded dynamically.  */
+-    struct link_map **l_orig_initfini;
+ 
+     /* List of the dependencies introduced through symbol binding.  */
+     struct link_map_reldeps
+diff -Naur glibc-2.14.1.orig/resolv/res_query.c glibc-2.14.1/resolv/res_query.c
+--- glibc-2.14.1.orig/resolv/res_query.c	2011-10-07 09:48:55.000000000 +0000
++++ glibc-2.14.1/resolv/res_query.c	2011-10-07 19:43:10.361412711 +0000
+@@ -122,6 +122,7 @@
+ 		  int *resplen2)
+ {
+ 	HEADER *hp = (HEADER *) answer;
++	HEADER *hp2;
+ 	int n, use_malloc = 0;
+ 	u_int oflags = statp->_flags;
+ 
+@@ -239,26 +240,25 @@
+ 	  /* __libc_res_nsend might have reallocated the buffer.  */
+ 	  hp = (HEADER *) *answerp;
+ 
+-	/* We simplify the following tests by assigning HP to HP2.  It
+-	   is easy to verify that this is the same as ignoring all
+-	   tests of HP2.  */
+-	HEADER *hp2 = answerp2 ? (HEADER *) *answerp2 : hp;
+-
+-	if (n < (int) sizeof (HEADER) && answerp2 != NULL
+-	    && *resplen2 > (int) sizeof (HEADER))
++	/* We simplify the following tests by assigning HP to HP2 or
++	   vice versa.  It is easy to verify that this is the same as
++	   ignoring all tests of HP or HP2.  */
++	if (answerp2 == NULL || *resplen2 < (int) sizeof (HEADER))
+ 	  {
+-	    /* Special case of partial answer.  */
+-	    assert (hp != hp2);
+-	    hp = hp2;
++	    hp2 = hp;
+ 	  }
+-	else if (answerp2 != NULL && *resplen2 < (int) sizeof (HEADER)
+-		 && n > (int) sizeof (HEADER))
++	else
+ 	  {
+-	    /* Special case of partial answer.  */
+-	    assert (hp != hp2);
+-	    hp2 = hp;
++	    hp2 = (HEADER *) *answerp2;
++	    if (n < (int) sizeof (HEADER))
++	      {
++	        hp = hp2;
++	      }
+ 	  }
+ 
++	/* Make sure both hp and hp2 are defined */
++	assert((hp != NULL) && (hp2 != NULL));
++
+ 	if ((hp->rcode != NOERROR || ntohs(hp->ancount) == 0)
+ 	    && (hp2->rcode != NOERROR || ntohs(hp2->ancount) == 0)) {
+ #ifdef DEBUG
diff --git a/source/l/glibc/glibc-2.15-revert-c5a0802a.diff b/source/l/glibc/glibc-2.15-revert-c5a0802a.diff
new file mode 100644
index 00000000..b53581b3
--- /dev/null
+++ b/source/l/glibc/glibc-2.15-revert-c5a0802a.diff
@@ -0,0 +1,226 @@
+diff -rup a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
+--- a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S	2011-12-22 18:04:12.937212834 +0000
++++ b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S	2011-12-22 18:04:42.104222278 +0000
+@@ -137,7 +137,6 @@ __pthread_cond_wait:
+	cmpl	$PI_BIT, %eax
+	jne	18f
+
+-90:
+	movl	$(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx
+	movl	%ebp, %edx
+	xorl	%esi, %esi
+@@ -151,9 +150,6 @@ __pthread_cond_wait:
+	sete	16(%esp)
+	je	19f
+
+-	cmpl	$-EAGAIN, %eax
+-	je	91f
+-
+	/* Normal and PI futexes dont mix. Use normal futex functions only
+	   if the kernel does not support the PI futex functions.  */
+	cmpl	$-ENOSYS, %eax
+@@ -398,78 +394,6 @@ __pthread_cond_wait:
+ #endif
+	call	__lll_unlock_wake
+	jmp	11b
+-
+-91:
+-.LcleanupSTART2:
+-	/* FUTEX_WAIT_REQUEUE_PI returned EAGAIN.  We need to
+-	   call it again.  */
+-
+-	/* Get internal lock.  */
+-	movl	$1, %edx
+-	xorl	%eax, %eax
+-	LOCK
+-#if cond_lock == 0
+-	cmpxchgl %edx, (%ebx)
+-#else
+-	cmpxchgl %edx, cond_lock(%ebx)
+-#endif
+-	jz	92f
+-
+-#if cond_lock == 0
+-	movl	%ebx, %edx
+-#else
+-	leal	cond_lock(%ebx), %edx
+-#endif
+-#if (LLL_SHARED-LLL_PRIVATE) > 255
+-	xorl	%ecx, %ecx
+-#endif
+-	cmpl	$-1, dep_mutex(%ebx)
+-	setne	%cl
+-	subl	$1, %ecx
+-	andl	$(LLL_SHARED-LLL_PRIVATE), %ecx
+-#if LLL_PRIVATE != 0
+-	addl	$LLL_PRIVATE, %ecx
+-#endif
+-	call	__lll_lock_wait
+-
+-92:
+-	/* Increment the cond_futex value again, so it can be used as a new
+-	   expected value. */
+-	addl	$1, cond_futex(%ebx)
+-	movl	cond_futex(%ebx), %ebp
+-
+-	/* Unlock.  */
+-	LOCK
+-#if cond_lock == 0
+-	subl	$1, (%ebx)
+-#else
+-	subl	$1, cond_lock(%ebx)
+-#endif
+-	je	93f
+-#if cond_lock == 0
+-	movl	%ebx, %eax
+-#else
+-	leal	cond_lock(%ebx), %eax
+-#endif
+-#if (LLL_SHARED-LLL_PRIVATE) > 255
+-	xorl	%ecx, %ecx
+-#endif
+-	cmpl	$-1, dep_mutex(%ebx)
+-	setne	%cl
+-	subl	$1, %ecx
+-	andl	$(LLL_SHARED-LLL_PRIVATE), %ecx
+-#if LLL_PRIVATE != 0
+-	addl	$LLL_PRIVATE, %ecx
+-#endif
+-	call	__lll_unlock_wake
+-
+-93:
+-	/* Set the rest of SYS_futex args for FUTEX_WAIT_REQUEUE_PI. */
+-	xorl	%ecx, %ecx
+-	movl	dep_mutex(%ebx), %edi
+-	jmp	90b
+-.LcleanupEND2:
+-
+	.size	__pthread_cond_wait, .-__pthread_cond_wait
+ versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait,
+		  GLIBC_2_3_2)
+@@ -642,10 +566,6 @@ __condvar_w_cleanup:
+	.long	.LcleanupEND-.Lsub_cond_futex
+	.long	__condvar_w_cleanup-.LSTARTCODE
+	.uleb128  0
+-	.long	.LcleanupSTART2-.LSTARTCODE
+-	.long	.LcleanupEND2-.LcleanupSTART2
+-	.long	__condvar_w_cleanup-.LSTARTCODE
+-	.uleb128  0
+	.long	.LcallUR-.LSTARTCODE
+	.long	.LENDCODE-.LcallUR
+	.long	0
+Only in b/nptl/sysdeps/unix/sysv/linux/i386/i486: pthread_cond_wait.S.orig
+diff -rup a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
+--- a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S	2011-12-22 18:04:12.941212837 +0000
++++ b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S	2011-12-22 18:05:05.155229737 +0000
+@@ -23,7 +23,6 @@
+ #include <lowlevelcond.h>
+ #include <tcb-offsets.h>
+ #include <pthread-pi-defines.h>
+-#include <pthread-errnos.h>
+
+ #include <kernel-features.h>
+
+@@ -137,14 +136,11 @@ __pthread_cond_wait:
+	cmpl	$PI_BIT, %eax
+	jne	61f
+
+-90:
+	movl	$(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi
+	movl	$SYS_futex, %eax
+	syscall
+
+	movl	$1, %r8d
+-	cmpq	$-EAGAIN, %rax
+-	je	91f
+ #ifdef __ASSUME_REQUEUE_PI
+	jmp	62f
+ #else
+@@ -331,70 +327,6 @@ __pthread_cond_wait:
+
+ 13:	movq	%r10, %rax
+	jmp	14b
+-
+-91:
+-.LcleanupSTART2:
+-	/* FUTEX_WAIT_REQUEUE_PI returned EAGAIN.  We need to
+-	   call it again.  */
+-	movq	8(%rsp), %rdi
+-
+-	/* Get internal lock.  */
+-	movl	$1, %esi
+-	xorl	%eax, %eax
+-	LOCK
+-#if cond_lock == 0
+-	cmpxchgl %esi, (%rdi)
+-#else
+-	cmpxchgl %esi, cond_lock(%rdi)
+-#endif
+-	jz	92f
+-
+-#if cond_lock != 0
+-	addq	$cond_lock, %rdi
+-#endif
+-	cmpq	$-1, dep_mutex-cond_lock(%rdi)
+-	movl	$LLL_PRIVATE, %eax
+-	movl	$LLL_SHARED, %esi
+-	cmovne	%eax, %esi
+-	callq	__lll_lock_wait
+-#if cond_lock != 0
+-	subq	$cond_lock, %rdi
+-#endif
+-92:
+-	/* Increment the cond_futex value again, so it can be used as a new
+-	   expected value. */
+-	incl	cond_futex(%rdi)
+-	movl	cond_futex(%rdi), %edx
+-
+-	/* Release internal lock.  */
+-	LOCK
+-#if cond_lock == 0
+-	decl	(%rdi)
+-#else
+-	decl	cond_lock(%rdi)
+-#endif
+-	jz	93f
+-
+-#if cond_lock != 0
+-	addq	$cond_lock, %rdi
+-#endif
+-	cmpq	$-1, dep_mutex-cond_lock(%rdi)
+-	movl	$LLL_PRIVATE, %eax
+-	movl	$LLL_SHARED, %esi
+-	cmovne	%eax, %esi
+-	/* The call preserves %rdx.  */
+-	callq	__lll_unlock_wake
+-#if cond_lock != 0
+-	subq	$cond_lock, %rdi
+-#endif
+-93:
+-	/* Set the rest of SYS_futex args for FUTEX_WAIT_REQUEUE_PI. */
+-	xorq	%r10, %r10
+-	movq	dep_mutex(%rdi), %r8
+-	leaq	cond_futex(%rdi), %rdi
+-	jmp	90b
+-.LcleanupEND2:
+-
+	.size	__pthread_cond_wait, .-__pthread_cond_wait
+ versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait,
+		  GLIBC_2_3_2)
+@@ -547,15 +479,11 @@ __condvar_cleanup1:
+	.uleb128 .LcleanupSTART-.LSTARTCODE
+	.uleb128 .LcleanupEND-.LcleanupSTART
+	.uleb128 __condvar_cleanup1-.LSTARTCODE
+-	.uleb128 0
+-	.uleb128 .LcleanupSTART2-.LSTARTCODE
+-	.uleb128 .LcleanupEND2-.LcleanupSTART2
+-	.uleb128 __condvar_cleanup1-.LSTARTCODE
+-	.uleb128 0
++	.uleb128  0
+	.uleb128 .LcallUR-.LSTARTCODE
+	.uleb128 .LENDCODE-.LcallUR
+	.uleb128 0
+-	.uleb128 0
++	.uleb128  0
+ .Lcstend:
+
diff --git a/source/l/glibc/glibc-2.15.nscd-race-fix.diff b/source/l/glibc/glibc-2.15.nscd-race-fix.diff
new file mode 100644
index 00000000..f1323570
--- /dev/null
+++ b/source/l/glibc/glibc-2.15.nscd-race-fix.diff
@@ -0,0 +1,47 @@
+--- c/nscd/nscd_gethst_r.c	2012-01-01 05:16:32.000000000 -0700
++++ c/nscd/nscd_gethst_r.c	2012-03-28 10:45:51.546600822 -0600
+@@ -101,9 +101,27 @@ libc_freeres_fn (hst_map_free)
+ uint32_t
+ __nscd_get_nl_timestamp (void)
+ {
++  uint32_t retval;
+   if (__nss_not_use_nscd_hosts != 0)
+     return 0;
+ 
++  int cnt = 0;
++  /* __nscd_get_mapping can change hst_map_handle.mapped to NO_MAPPING.
++   However, __nscd_get_mapping assumes the prior value was not NO_MAPPING.
++   Thus we have to acquire the lock to prevent this thread from changing
++   hst_map_handle.mapped to NO_MAPPING while another thread is inside
++    __nscd_get_mapping.  */
++  while (__builtin_expect
++	 (atomic_compare_and_exchange_val_acq (&__hst_map_handle.lock,
++					       1, 0) != 0, 0))
++    {
++      // XXX Best number of rounds?
++      if (__builtin_expect (++cnt > 5, 0))
++	return 0;
++
++      atomic_delay ();
++    }
++
+   struct mapped_database *map = __hst_map_handle.mapped;
+ 
+   if (map == NULL
+@@ -113,9 +131,14 @@ __nscd_get_nl_timestamp (void)
+     map = __nscd_get_mapping (GETFDHST, "hosts", &__hst_map_handle.mapped);
+ 
+   if (map == NO_MAPPING)
+-    return 0;
++    retval =  0;
++  else
++    retval =  map->head->extra_data[NSCD_HST_IDX_CONF_TIMESTAMP];
++
++  /* Release the lock.  */
++  __hst_map_handle.lock = 0;
+ 
+-  return map->head->extra_data[NSCD_HST_IDX_CONF_TIMESTAMP];
++  return retval;
+ }
+ 
+ 
diff --git a/source/l/glibc/glibc.SlackBuild b/source/l/glibc/glibc.SlackBuild
index d3f21ae5..0ab9e714 100755
--- a/source/l/glibc/glibc.SlackBuild
+++ b/source/l/glibc/glibc.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,9 +22,9 @@
 
 ## build glibc-$VERSION for Slackware
 
-VERSION=${VERSION:-2.13}
+VERSION=${VERSION:-2.15}
 CHECKOUT=${CHECKOUT:-""}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-7}
 
 ## Included in glibc now:
 ## glibc-libidn version
@@ -134,6 +134,13 @@ fix_doinst() {
 # This is a patch function to put all glibc patches in the build script
 # up near the top.
 apply_patches() {
+  # Reexport the RPC interfaces that were removed in glibc-2.14.
+  # Sure, it's crufy code, but stuff needs it, so rather than pull the
+  # rug out from under you, we'll just humbly recommend that you consider
+  # transitioning away from it...  :-)
+  zcat $CWD/glibc-2.14-reexport-rpc-interface.patch.gz | patch -p1 --verbose || exit 1
+  # Add back the NIS and RPC headers:
+  zcat $CWD/glibc-2.14-reinstall-nis-rpc-headers.patch.gz | patch -p1 --verbose || exit 1
   # Use old-style locale directories rather than a single (and strangely
   # formatted) /usr/lib/locale/locale-archive file:
   zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1
@@ -165,7 +172,17 @@ apply_patches() {
   # Avoid the Intel optimized asm routines for now because they break
   # the flash player.  We'll phase this in when it's safer to do so.
   zcat $CWD/glibc.disable.broken.optimized.memcpy.diff.gz | patch -p1 --verbose || exit 1
-  # Update the timezone information.
+  # Upstream fixes to avert Firefox crashes:  (still applies to 2.15...   probably better not to drop it)
+  zcat $CWD/glibc-2.14.1-fixes-1.patch.gz | patch -p1 --verbose || exit 1
+  # Upstream patch to fix relocation sorting related crashes:
+  zcat $CWD/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff.gz | patch -p1 --verbose || exit 1
+  # Upstream patch to fix crashes when nscd is not running:
+  zcat $CWD/glibc-2.15.nscd-race-fix.diff.gz | patch -p1 --verbose || exit 1
+  # Revert a patch that went into 2.15 that causes NPTL related crashes:
+  zcat $CWD/glibc-2.15-revert-c5a0802a.diff.gz | patch -p1 --verbose || exit 1
+  # Patch integer overflows in strtod*() functions:
+  zcat $CWD/glibc.strtod.CVE-2012-3480.diff.gz | patch -p1 --verbose || exit 1
+  # Update the timezone information:
   ( cd timezone
     tar xzf $CWD/tzdata?????.tar.gz
     chown root:root *
@@ -175,6 +192,8 @@ apply_patches() {
     mkdir tzcode
     cd tzcode
     tar xzf $CWD/tzcode?????.tar.gz
+    # A partial build is needed here to update TZVERSION in version.h:
+    make -i
     chown -R root:root .
     chmod 644 *
     cp -a *.c *.h ..
@@ -256,7 +275,7 @@ CFLAGS="-g $OPTIMIZ" \
 ../configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --enable-kernel=2.6.18 \
+  --enable-kernel=2.6.32 \
   --with-headers=/usr/include \
   --enable-add-ons=libidn,nptl \
   --enable-profile \
@@ -358,6 +377,9 @@ rm $PKG/etc/ld.so.cache
 ##################################
 
 # glibc-zoneinfo.  We will start with an easy one to avoid breaking a sweat.  ;-)
+cd $CWD
+ZONE_VERSIONS="$(echo tzcode* | cut -f1 -d . | cut -b7-11)_$(echo tzdata* | cut -f1 -d . | cut -b7-11)"
+echo $ZONE_VERSIONS
 cd $PZONE
 # Install some scripts to help select a timezone:
 mkdir -p $PZONE/var/log/setup
@@ -379,7 +401,7 @@ mkdir -p $PZONE/etc
 # This is already hard-coded into doinst.sh (like it'll be there anyway ;-):
 rm -f etc/localtime
 # Wrap it up:
-makepkg -l y -c n $TMP/glibc-zoneinfo-$VERSION-noarch-$BUILD.txz
+makepkg -l y -c n $TMP/glibc-zoneinfo-$ZONE_VERSIONS-noarch-$BUILD.txz
 
 # glibc-profile:
 cd $PPROFILE
diff --git a/source/l/glibc/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff b/source/l/glibc/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff
new file mode 100644
index 00000000..e9b3ba40
--- /dev/null
+++ b/source/l/glibc/glibc.git-6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4.diff
@@ -0,0 +1,322 @@
+From 6ee65ed6ddbf04402fad0bec6aa9c73b9d982ae4 Mon Sep 17 00:00:00 2001
+From: Ulrich Drepper <drepper@gmail.com>
+Date: Fri, 27 Jan 2012 15:05:19 -0500
+Subject: [PATCH] Sort objects before relocations
+
+---
+ ChangeLog              |   11 ++++
+ Makeconfig             |    6 ++
+ NEWS                   |    4 +-
+ elf/Makefile           |   15 +++++-
+ elf/dl-open.c          |  128 ++++++++++++++++++++++++++++++++++++------------
+ elf/tst-relsort1.c     |   19 +++++++
+ elf/tst-relsort1mod1.c |    7 +++
+ elf/tst-relsort1mod2.c |    7 +++
+ 8 files changed, 160 insertions(+), 37 deletions(-)
+ create mode 100644 elf/tst-relsort1.c
+ create mode 100644 elf/tst-relsort1mod1.c
+ create mode 100644 elf/tst-relsort1mod2.c
+
+#diff --git a/ChangeLog b/ChangeLog
+#index 24c9550..2efe17a 100644
+#--- a/ChangeLog
+#+++ b/ChangeLog
+#@@ -1,3 +1,14 @@
+#+2012-01-27  Ulrich Drepper  <drepper@gmail.com>
+#+
+#+	[BZ #13618]
+#+	* elf/dl-open.c (dl_open_worker): Sort objects by dependency before
+#+	relocation.
+#+	* Makeconfig (libm): Define.
+#+	* elf/Makefile: Add rules to build and run tst-relsort1.
+#+	* elf/tst-relsort1.c: New file.
+#+	* elf/tst-relsort1mod1.c: New file.
+#+	* elf/tst-relsort1mod2.c: New file.
+#+
+ 2012-01-26  Joseph Myers  <joseph@codesourcery.com>
+ 
+ 	* crypt/md5.h: Remove __STDC__ conditionals.
+diff --git a/Makeconfig b/Makeconfig
+index 2db2821..68547b2 100644
+--- a/Makeconfig
++++ b/Makeconfig
+@@ -900,6 +900,12 @@ else
+ libdl = $(common-objpfx)dlfcn/libdl.a
+ endif
+ 
++ifeq ($(build-shared),yes)
++libm = $(common-objpfx)math/libm.so$(libm.so-version)
++else
++libm = $(common-objpfx)math/libm.a
++endif
++
+ # These are the subdirectories containing the library source.  The order
+ # is more or less arbitrary.  The sorting step will take care of the
+ # dependencies.
+#diff --git a/NEWS b/NEWS
+#index 42e09c1..3b502b7 100644
+#--- a/NEWS
+#+++ b/NEWS
+#@@ -1,4 +1,4 @@
+#-GNU C Library NEWS -- history of user-visible changes.  2012-1-26
+#+GNU C Library NEWS -- history of user-visible changes.  2012-1-27
+ #Copyright (C) 1992-2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+ #See the end for copying conditions.
+# 
+#@@ -10,7 +10,7 @@ Version 2.16
+ #* The following bugs are resolved with this release:
+# 
+   #13525, 13526, 13527, 13528, 13529, 13531, 13532, 13533, 13547, 13530,
+#-  13551, 13552, 13553, 13555, 13559, 13583
+#+  13551, 13552, 13553, 13555, 13559, 13583, 13618
+# 
+ #* ISO C11 support:
+# 
+diff --git a/elf/Makefile b/elf/Makefile
+index 052e763..3f1772a 100644
+--- a/elf/Makefile
++++ b/elf/Makefile
+@@ -124,7 +124,8 @@ distribute	:= rtld-Rules \
+ 		   tst-initordera1.c tst-initordera2.c tst-initorderb1.c \
+ 		   tst-initorderb2.c tst-initordera3.c tst-initordera4.c \
+ 		   tst-initorder.c \
+-		   tst-initorder2.c
++		   tst-initorder2.c \
++		   tst-relsort1.c tst-relsort1mod1.c tst-relsort1mod2.c
+ 
+ CFLAGS-dl-runtime.c = -fexceptions -fasynchronous-unwind-tables
+ CFLAGS-dl-lookup.c = -fexceptions -fasynchronous-unwind-tables
+@@ -227,7 +228,7 @@ tests += loadtest restest1 preloadtest loadfail multiload origtest resolvfail \
+ 	 tst-audit1 tst-audit2 \
+ 	 tst-stackguard1 tst-addr1 tst-thrlock \
+ 	 tst-unique1 tst-unique2 tst-unique3 tst-unique4 \
+-	 tst-initorder tst-initorder2
++	 tst-initorder tst-initorder2 tst-relsort1
+ #	 reldep9
+ test-srcs = tst-pathopt
+ selinux-enabled := $(shell cat /selinux/enforce 2> /dev/null)
+@@ -290,7 +291,9 @@ modules-names = testobj1 testobj2 testobj3 testobj4 testobj5 testobj6 \
+ 		tst-initordera1 tst-initorderb1 \
+ 		tst-initordera2 tst-initorderb2 \
+ 		tst-initordera3 tst-initordera4 \
+-		tst-initorder2a tst-initorder2b tst-initorder2c tst-initorder2d
++		tst-initorder2a tst-initorder2b tst-initorder2c \
++		tst-initorder2d \
++		tst-relsort1mod1 tst-relsort1mod2
+ ifeq (yes,$(have-initfini-array))
+ modules-names += tst-array2dep tst-array5dep
+ endif
+@@ -1195,3 +1198,9 @@ CFLAGS-tst-auditmod6b.c += $(AVX-CFLAGS)
+ CFLAGS-tst-auditmod6c.c += $(AVX-CFLAGS)
+ CFLAGS-tst-auditmod7b.c += $(AVX-CFLAGS)
+ endif
++
++$(objpfx)tst-relsort1: $(libdl)
++$(objpfx)tst-relsort1mod1.so: $(libm) $(objpfx)tst-relsort1mod2.so
++$(objpfx)tst-relsort1mod2.so: $(libm)
++$(objpfx)tst-relsort1.out: $(objpfx)tst-relsort1mod1.so \
++			   $(objpfx)tst-relsort1mod2.so
+diff --git a/elf/dl-open.c b/elf/dl-open.c
+index a0b5c50..a56bdc1 100644
+--- a/elf/dl-open.c
++++ b/elf/dl-open.c
+@@ -1,5 +1,5 @@
+ /* Load a shared object at runtime, relocate it, and run its initializer.
+-   Copyright (C) 1996-2007, 2009, 2010, 2011 Free Software Foundation, Inc.
++   Copyright (C) 1996-2007, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+    This file is part of the GNU C Library.
+ 
+    The GNU C Library is free software; you can redistribute it and/or
+@@ -302,45 +302,109 @@ dl_open_worker (void *a)
+   if (GLRO(dl_lazy))
+     reloc_mode |= mode & RTLD_LAZY;
+ 
+-  /* Relocate the objects loaded.  We do this in reverse order so that copy
+-     relocs of earlier objects overwrite the data written by later objects.  */
+-
++  /* Sort the objects by dependency for the relocation process.  This
++     allows IFUNC relocations to work and it also means copy
++     relocation of dependencies are if necessary overwritten.  */
++  size_t nmaps = 0;
+   struct link_map *l = new;
+-  while (l->l_next)
+-    l = l->l_next;
+-  while (1)
++  do
++    {
++      if (! l->l_real->l_relocated)
++	++nmaps;
++      l = l->l_next;
++    }
++  while (l != NULL);
++  struct link_map *maps[nmaps];
++  nmaps = 0;
++  l = new;
++  do
+     {
+       if (! l->l_real->l_relocated)
++	maps[nmaps++] = l;
++      l = l->l_next;
++    }
++  while (l != NULL);
++  if (nmaps > 1)
++    {
++      char seen[nmaps];
++      memset (seen, '\0', nmaps);
++      size_t i = 0;
++      while (1)
+ 	{
+-#ifdef SHARED
+-	  if (__builtin_expect (GLRO(dl_profile) != NULL, 0))
++	  ++seen[i];
++	  struct link_map *thisp = maps[i];
++
++	  /* Find the last object in the list for which the current one is
++	     a dependency and move the current object behind the object
++	     with the dependency.  */
++	  size_t k = nmaps - 1;
++	  while (k > i)
+ 	    {
+-	      /* If this here is the shared object which we want to profile
+-		 make sure the profile is started.  We can find out whether
+-		 this is necessary or not by observing the `_dl_profile_map'
+-		 variable.  If was NULL but is not NULL afterwars we must
+-		 start the profiling.  */
+-	      struct link_map *old_profile_map = GL(dl_profile_map);
++	      struct link_map **runp = maps[k]->l_initfini;
++	      if (runp != NULL)
++		/* Look through the dependencies of the object.  */
++		while (*runp != NULL)
++		  if (__builtin_expect (*runp++ == thisp, 0))
++		    {
++		      /* Move the current object to the back past the last
++			 object with it as the dependency.  */
++		      memmove (&maps[i], &maps[i + 1],
++			       (k - i) * sizeof (maps[0]));
++		      maps[k] = thisp;
++
++		      if (seen[i + 1] > 1)
++			{
++			  ++i;
++			  goto next_clear;
++			}
++
++		      char this_seen = seen[i];
++		      memmove (&seen[i], &seen[i + 1],
++			       (k - i) * sizeof (seen[0]));
++		      seen[k] = this_seen;
++
++		      goto next;
++		    }
++
++	      --k;
++	    }
+ 
+-	      _dl_relocate_object (l, l->l_scope, reloc_mode | RTLD_LAZY, 1);
++	  if (++i == nmaps)
++	    break;
++	next_clear:
++	  memset (&seen[i], 0, (nmaps - i) * sizeof (seen[0]));
++	next:;
++	}
++    }
+ 
+-	      if (old_profile_map == NULL && GL(dl_profile_map) != NULL)
+-		{
+-		  /* We must prepare the profiling.  */
+-		  _dl_start_profile ();
++  for (size_t i = nmaps; i-- > 0; )
++    {
++      l = maps[i];
+ 
+-		  /* Prevent unloading the object.  */
+-		  GL(dl_profile_map)->l_flags_1 |= DF_1_NODELETE;
+-		}
++#ifdef SHARED
++      if (__builtin_expect (GLRO(dl_profile) != NULL, 0))
++	{
++	  /* If this here is the shared object which we want to profile
++	     make sure the profile is started.  We can find out whether
++	     this is necessary or not by observing the `_dl_profile_map'
++	     variable.  If it was NULL but is not NULL afterwars we must
++	     start the profiling.  */
++	  struct link_map *old_profile_map = GL(dl_profile_map);
++
++	  _dl_relocate_object (l, l->l_scope, reloc_mode | RTLD_LAZY, 1);
++
++	  if (old_profile_map == NULL && GL(dl_profile_map) != NULL)
++	    {
++	      /* We must prepare the profiling.  */
++	      _dl_start_profile ();
++
++	      /* Prevent unloading the object.  */
++	      GL(dl_profile_map)->l_flags_1 |= DF_1_NODELETE;
+ 	    }
+-	  else
+-#endif
+-	    _dl_relocate_object (l, l->l_scope, reloc_mode, 0);
+ 	}
+-
+-      if (l == new)
+-	break;
+-      l = l->l_prev;
++      else
++#endif
++	_dl_relocate_object (l, l->l_scope, reloc_mode, 0);
+     }
+ 
+   /* If the file is not loaded now as a dependency, add the search
+diff --git a/elf/tst-relsort1.c b/elf/tst-relsort1.c
+new file mode 100644
+index 0000000..972100c
+--- /dev/null
++++ b/elf/tst-relsort1.c
+@@ -0,0 +1,19 @@
++#include <dlfcn.h>
++#include <stdio.h>
++
++
++static int
++do_test ()
++{
++  const char lib[] = "$ORIGIN/tst-relsort1mod1.so";
++  void *h = dlopen (lib, RTLD_NOW);
++  if (h == NULL)
++    {
++      puts (dlerror ());
++      return 1;
++    }
++  return 0;
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"
+diff --git a/elf/tst-relsort1mod1.c b/elf/tst-relsort1mod1.c
+new file mode 100644
+index 0000000..9e4a943
+--- /dev/null
++++ b/elf/tst-relsort1mod1.c
+@@ -0,0 +1,7 @@
++extern int foo (double);
++
++int
++bar (void)
++{
++  return foo (1.2);
++}
+diff --git a/elf/tst-relsort1mod2.c b/elf/tst-relsort1mod2.c
+new file mode 100644
+index 0000000..a2c3e55
+--- /dev/null
++++ b/elf/tst-relsort1mod2.c
+@@ -0,0 +1,7 @@
++#include <math.h>
++
++int
++foo (double d)
++{
++  return floor (d) != 0.0;
++}
+-- 
+1.7.3.4
+
diff --git a/source/l/glibc/glibc.strtod.CVE-2012-3480.diff b/source/l/glibc/glibc.strtod.CVE-2012-3480.diff
new file mode 100644
index 00000000..7a7bdeb7
--- /dev/null
+++ b/source/l/glibc/glibc.strtod.CVE-2012-3480.diff
@@ -0,0 +1,407 @@
+From 8a780f7f68a1cd4c575bb17973a9e18826b05ef9 Mon Sep 17 00:00:00 2001
+From: Joseph Myers <joseph@codesourcery.com>
+Date: Mon, 27 Aug 2012 15:59:24 +0000
+Subject: [PATCH 1/1] Fix strtod integer/buffer overflow (bug 14459).
+ (cherry picked from commit d6e70f4368533224e66d10b7f2126b899a3fd5e4)
+
+Conflicts:
+
+	ChangeLog
+	NEWS
+	stdlib/Makefile
+---
+ ChangeLog                    |   17 +++++
+ NEWS                         |    2 +-
+ stdlib/Makefile              |    2 +-
+ stdlib/strtod_l.c            |  142 ++++++++++++++++++++++++++++++++---------
+ stdlib/tst-strtod-overflow.c |   48 ++++++++++++++
+ 5 files changed, 178 insertions(+), 33 deletions(-)
+ create mode 100644 stdlib/tst-strtod-overflow.c
+
+diff --git a/stdlib/Makefile b/stdlib/Makefile
+index 04c6ac5..b55f573 100644
+--- a/stdlib/Makefile
++++ b/stdlib/Makefile
+@@ -71,7 +71,7 @@ tests		:= tst-strtol tst-strtod testmb testrand testsort testdiv   \
+ 		   tst-atof1 tst-atof2 tst-strtod2 tst-strtod3 tst-rand48-2 \
+ 		   tst-makecontext tst-strtod4 tst-strtod5 tst-qsort2	    \
+ 		   tst-makecontext2 tst-strtod6 tst-unsetenv1		    \
+-		   tst-makecontext3 bug-getcontext
++		   tst-makecontext3 bug-getcontext tst-strtod-overflow
+ 
+ include ../Makeconfig
+ 
+diff --git a/stdlib/strtod_l.c b/stdlib/strtod_l.c
+index f24d4de..0deaebf 100644
+--- a/stdlib/strtod_l.c
++++ b/stdlib/strtod_l.c
+@@ -62,6 +62,7 @@ extern unsigned long long int ____strtoull_l_internal (const char *, char **,
+ #include <math.h>
+ #include <stdlib.h>
+ #include <string.h>
++#include <stdint.h>
+ 
+ /* The gmp headers need some configuration frobs.  */
+ #define HAVE_ALLOCA 1
+@@ -74,7 +75,6 @@ extern unsigned long long int ____strtoull_l_internal (const char *, char **,
+ #include "longlong.h"
+ #include "fpioconst.h"
+ 
+-#define NDEBUG 1
+ #include <assert.h>
+ 
+ 
+@@ -176,19 +176,19 @@ extern const mp_limb_t _tens_in_limb[MAX_DIG_PER_LIMB + 1];
+ /* Return a floating point number of the needed type according to the given
+    multi-precision number after possible rounding.  */
+ static FLOAT
+-round_and_return (mp_limb_t *retval, int exponent, int negative,
++round_and_return (mp_limb_t *retval, intmax_t exponent, int negative,
+ 		  mp_limb_t round_limb, mp_size_t round_bit, int more_bits)
+ {
+   if (exponent < MIN_EXP - 1)
+     {
+-      mp_size_t shift = MIN_EXP - 1 - exponent;
+-
+-      if (shift > MANT_DIG)
++      if (exponent < MIN_EXP - 1 - MANT_DIG)
+ 	{
+ 	  __set_errno (ERANGE);
+ 	  return 0.0;
+ 	}
+ 
++      mp_size_t shift = MIN_EXP - 1 - exponent;
++
+       more_bits |= (round_limb & ((((mp_limb_t) 1) << round_bit) - 1)) != 0;
+       if (shift == MANT_DIG)
+ 	/* This is a special case to handle the very seldom case where
+@@ -235,6 +235,9 @@ round_and_return (mp_limb_t *retval, int exponent, int negative,
+       __set_errno (ERANGE);
+     }
+ 
++  if (exponent > MAX_EXP)
++    goto overflow;
++
+   if ((round_limb & (((mp_limb_t) 1) << round_bit)) != 0
+       && (more_bits || (retval[0] & 1) != 0
+ 	  || (round_limb & ((((mp_limb_t) 1) << round_bit) - 1)) != 0))
+@@ -260,6 +263,7 @@ round_and_return (mp_limb_t *retval, int exponent, int negative,
+     }
+ 
+   if (exponent > MAX_EXP)
++  overflow:
+     return negative ? -FLOAT_HUGE_VAL : FLOAT_HUGE_VAL;
+ 
+   return MPN2FLOAT (retval, exponent, negative);
+@@ -273,7 +277,7 @@ round_and_return (mp_limb_t *retval, int exponent, int negative,
+    factor for the resulting number (see code) multiply by it.  */
+ static const STRING_TYPE *
+ str_to_mpn (const STRING_TYPE *str, int digcnt, mp_limb_t *n, mp_size_t *nsize,
+-	    int *exponent
++	    intmax_t *exponent
+ #ifndef USE_WIDE_CHAR
+ 	    , const char *decimal, size_t decimal_len, const char *thousands
+ #endif
+@@ -303,6 +307,7 @@ str_to_mpn (const STRING_TYPE *str, int digcnt, mp_limb_t *n, mp_size_t *nsize,
+ 	      cy += __mpn_add_1 (n, n, *nsize, low);
+ 	      if (cy != 0)
+ 		{
++		  assert (*nsize < MPNSIZE);
+ 		  n[*nsize] = cy;
+ 		  ++(*nsize);
+ 		}
+@@ -337,7 +342,7 @@ str_to_mpn (const STRING_TYPE *str, int digcnt, mp_limb_t *n, mp_size_t *nsize,
+     }
+   while (--digcnt > 0);
+ 
+-  if (*exponent > 0 && cnt + *exponent <= MAX_DIG_PER_LIMB)
++  if (*exponent > 0 && *exponent <= MAX_DIG_PER_LIMB - cnt)
+     {
+       low *= _tens_in_limb[*exponent];
+       start = _tens_in_limb[cnt + *exponent];
+@@ -357,7 +362,10 @@ str_to_mpn (const STRING_TYPE *str, int digcnt, mp_limb_t *n, mp_size_t *nsize,
+       cy = __mpn_mul_1 (n, n, *nsize, start);
+       cy += __mpn_add_1 (n, n, *nsize, low);
+       if (cy != 0)
+-	n[(*nsize)++] = cy;
++	{
++	  assert (*nsize < MPNSIZE);
++	  n[(*nsize)++] = cy;
++	}
+     }
+ 
+   return str;
+@@ -415,7 +423,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ {
+   int negative;			/* The sign of the number.  */
+   MPN_VAR (num);		/* MP representation of the number.  */
+-  int exponent;			/* Exponent of the number.  */
++  intmax_t exponent;		/* Exponent of the number.  */
+ 
+   /* Numbers starting `0X' or `0x' have to be processed with base 16.  */
+   int base = 10;
+@@ -437,7 +445,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+   /* Points at the character following the integer and fractional digits.  */
+   const STRING_TYPE *expp;
+   /* Total number of digit and number of digits in integer part.  */
+-  int dig_no, int_no, lead_zero;
++  size_t dig_no, int_no, lead_zero;
+   /* Contains the last character read.  */
+   CHAR_TYPE c;
+ 
+@@ -769,7 +777,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+      are all or any is really a fractional digit will be decided
+      later.  */
+   int_no = dig_no;
+-  lead_zero = int_no == 0 ? -1 : 0;
++  lead_zero = int_no == 0 ? (size_t) -1 : 0;
+ 
+   /* Read the fractional digits.  A special case are the 'american
+      style' numbers like `16.' i.e. with decimal point but without
+@@ -791,12 +799,13 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 	     (base == 16 && ({ CHAR_TYPE lo = TOLOWER (c);
+ 			       lo >= L_('a') && lo <= L_('f'); })))
+ 	{
+-	  if (c != L_('0') && lead_zero == -1)
++	  if (c != L_('0') && lead_zero == (size_t) -1)
+ 	    lead_zero = dig_no - int_no;
+ 	  ++dig_no;
+ 	  c = *++cp;
+ 	}
+     }
++  assert (dig_no <= (uintmax_t) INTMAX_MAX);
+ 
+   /* Remember start of exponent (if any).  */
+   expp = cp;
+@@ -819,24 +828,80 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 
+       if (c >= L_('0') && c <= L_('9'))
+ 	{
+-	  int exp_limit;
++	  intmax_t exp_limit;
+ 
+ 	  /* Get the exponent limit. */
+ 	  if (base == 16)
+-	    exp_limit = (exp_negative ?
+-			 -MIN_EXP + MANT_DIG + 4 * int_no :
+-			 MAX_EXP - 4 * int_no + 4 * lead_zero + 3);
++	    {
++	      if (exp_negative)
++		{
++		  assert (int_no <= (uintmax_t) (INTMAX_MAX
++						 + MIN_EXP - MANT_DIG) / 4);
++		  exp_limit = -MIN_EXP + MANT_DIG + 4 * (intmax_t) int_no;
++		}
++	      else
++		{
++		  if (int_no)
++		    {
++		      assert (lead_zero == 0
++			      && int_no <= (uintmax_t) INTMAX_MAX / 4);
++		      exp_limit = MAX_EXP - 4 * (intmax_t) int_no + 3;
++		    }
++		  else if (lead_zero == (size_t) -1)
++		    {
++		      /* The number is zero and this limit is
++			 arbitrary.  */
++		      exp_limit = MAX_EXP + 3;
++		    }
++		  else
++		    {
++		      assert (lead_zero
++			      <= (uintmax_t) (INTMAX_MAX - MAX_EXP - 3) / 4);
++		      exp_limit = (MAX_EXP
++				   + 4 * (intmax_t) lead_zero
++				   + 3);
++		    }
++		}
++	    }
+ 	  else
+-	    exp_limit = (exp_negative ?
+-			 -MIN_10_EXP + MANT_DIG + int_no :
+-			 MAX_10_EXP - int_no + lead_zero + 1);
++	    {
++	      if (exp_negative)
++		{
++		  assert (int_no
++			  <= (uintmax_t) (INTMAX_MAX + MIN_10_EXP - MANT_DIG));
++		  exp_limit = -MIN_10_EXP + MANT_DIG + (intmax_t) int_no;
++		}
++	      else
++		{
++		  if (int_no)
++		    {
++		      assert (lead_zero == 0
++			      && int_no <= (uintmax_t) INTMAX_MAX);
++		      exp_limit = MAX_10_EXP - (intmax_t) int_no + 1;
++		    }
++		  else if (lead_zero == (size_t) -1)
++		    {
++		      /* The number is zero and this limit is
++			 arbitrary.  */
++		      exp_limit = MAX_10_EXP + 1;
++		    }
++		  else
++		    {
++		      assert (lead_zero
++			      <= (uintmax_t) (INTMAX_MAX - MAX_10_EXP - 1));
++		      exp_limit = MAX_10_EXP + (intmax_t) lead_zero + 1;
++		    }
++		}
++	    }
++
++	  if (exp_limit < 0)
++	    exp_limit = 0;
+ 
+ 	  do
+ 	    {
+-	      exponent *= 10;
+-	      exponent += c - L_('0');
+-
+-	      if (__builtin_expect (exponent > exp_limit, 0))
++	      if (__builtin_expect ((exponent > exp_limit / 10
++				     || (exponent == exp_limit / 10
++					 && c - L_('0') > exp_limit % 10)), 0))
+ 		/* The exponent is too large/small to represent a valid
+ 		   number.  */
+ 		{
+@@ -845,7 +910,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 		  /* We have to take care for special situation: a joker
+ 		     might have written "0.0e100000" which is in fact
+ 		     zero.  */
+-		  if (lead_zero == -1)
++		  if (lead_zero == (size_t) -1)
+ 		    result = negative ? -0.0 : 0.0;
+ 		  else
+ 		    {
+@@ -864,6 +929,9 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 		  /* NOTREACHED */
+ 		}
+ 
++	      exponent *= 10;
++	      exponent += c - L_('0');
++
+ 	      c = *++cp;
+ 	    }
+ 	  while (c >= L_('0') && c <= L_('9'));
+@@ -932,7 +1000,14 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 	}
+ #endif
+       startp += lead_zero + decimal_len;
+-      exponent -= base == 16 ? 4 * lead_zero : lead_zero;
++      assert (lead_zero <= (base == 16
++			    ? (uintmax_t) INTMAX_MAX / 4
++			    : (uintmax_t) INTMAX_MAX));
++      assert (lead_zero <= (base == 16
++			    ? ((uintmax_t) exponent
++			       - (uintmax_t) INTMAX_MIN) / 4
++			    : ((uintmax_t) exponent - (uintmax_t) INTMAX_MIN)));
++      exponent -= base == 16 ? 4 * (intmax_t) lead_zero : (intmax_t) lead_zero;
+       dig_no -= lead_zero;
+     }
+ 
+@@ -974,7 +1049,10 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+ 	}
+ 
+       /* Adjust the exponent for the bits we are shifting in.  */
+-      exponent += bits - 1 + (int_no - 1) * 4;
++      assert (int_no <= (uintmax_t) (exponent < 0
++				     ? (INTMAX_MAX - bits + 1) / 4
++				     : (INTMAX_MAX - exponent - bits + 1) / 4));
++      exponent += bits - 1 + ((intmax_t) int_no - 1) * 4;
+ 
+       while (--dig_no > 0 && idx >= 0)
+ 	{
+@@ -1014,13 +1092,15 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+      really integer digits or belong to the fractional part; i.e. we normalize
+      123e-2 to 1.23.  */
+   {
+-    register int incr = (exponent < 0 ? MAX (-int_no, exponent)
+-			 : MIN (dig_no - int_no, exponent));
++    register intmax_t incr = (exponent < 0
++			      ? MAX (-(intmax_t) int_no, exponent)
++			      : MIN ((intmax_t) dig_no - (intmax_t) int_no,
++				     exponent));
+     int_no += incr;
+     exponent -= incr;
+   }
+ 
+-  if (__builtin_expect (int_no + exponent > MAX_10_EXP + 1, 0))
++  if (__builtin_expect (exponent > MAX_10_EXP + 1 - (intmax_t) int_no, 0))
+     {
+       __set_errno (ERANGE);
+       return negative ? -FLOAT_HUGE_VAL : FLOAT_HUGE_VAL;
+@@ -1205,7 +1285,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+        digits we should have enough bits for the result.  The remaining
+        decimal digits give us the information that more bits are following.
+        This can be used while rounding.  (Two added as a safety margin.)  */
+-    if (dig_no - int_no > (MANT_DIG - bits + 2) / 3 + 2)
++    if ((intmax_t) dig_no > (intmax_t) int_no + (MANT_DIG - bits + 2) / 3 + 2)
+       {
+ 	dig_no = int_no + (MANT_DIG - bits + 2) / 3 + 2;
+ 	more_bits = 1;
+@@ -1213,7 +1293,7 @@ ____STRTOF_INTERNAL (nptr, endptr, group, loc)
+     else
+       more_bits = 0;
+ 
+-    neg_exp = dig_no - int_no - exponent;
++    neg_exp = (intmax_t) dig_no - (intmax_t) int_no - exponent;
+ 
+     /* Construct the denominator.  */
+     densize = 0;
+diff --git a/stdlib/tst-strtod-overflow.c b/stdlib/tst-strtod-overflow.c
+new file mode 100644
+index 0000000..668d55b
+--- /dev/null
++++ b/stdlib/tst-strtod-overflow.c
+@@ -0,0 +1,48 @@
++/* Test for integer/buffer overflow in strtod.
++   Copyright (C) 2012 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++
++#define EXPONENT "e-2147483649"
++#define SIZE 214748364
++
++static int
++do_test (void)
++{
++  char *p = malloc (1 + SIZE + sizeof (EXPONENT));
++  if (p == NULL)
++    {
++      puts ("malloc failed, cannot test for overflow");
++      return 0;
++    }
++  p[0] = '1';
++  memset (p + 1, '0', SIZE);
++  memcpy (p + 1 + SIZE, EXPONENT, sizeof (EXPONENT));
++  double d = strtod (p, NULL);
++  if (d != 0)
++    {
++      printf ("strtod returned wrong value: %a\n", d);
++      return 1;
++    }
++  return 0;
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"
+-- 
+1.7.3.4
diff --git a/source/l/glibc/slack-desc.glibc-zoneinfo b/source/l/glibc/slack-desc.glibc-zoneinfo
index 24dfd0e9..69420f78 100644
--- a/source/l/glibc/slack-desc.glibc-zoneinfo
+++ b/source/l/glibc/slack-desc.glibc-zoneinfo
@@ -12,7 +12,7 @@ glibc-zoneinfo: This package allows you to configure your time zone.
 glibc-zoneinfo:
 glibc-zoneinfo: This timezone database comes from the tzdata and tzcode packages by
 glibc-zoneinfo: Arthur David Olson et.al.  The latest version and more information
-glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/
+glibc-zoneinfo: may be found at:  http://www.iana.org/time-zones
 glibc-zoneinfo:
 glibc-zoneinfo: Use the timeconfig utility to set your local time zone.
 glibc-zoneinfo:
diff --git a/source/l/glibc/slack-desc.glibc-zoneinfo.olson b/source/l/glibc/slack-desc.glibc-zoneinfo.olson
new file mode 100644
index 00000000..24dfd0e9
--- /dev/null
+++ b/source/l/glibc/slack-desc.glibc-zoneinfo.olson
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+glibc-zoneinfo: glibc-zoneinfo (timezone database)
+glibc-zoneinfo:
+glibc-zoneinfo: This package allows you to configure your time zone.
+glibc-zoneinfo:
+glibc-zoneinfo: This timezone database comes from the tzdata and tzcode packages by
+glibc-zoneinfo: Arthur David Olson et.al.  The latest version and more information
+glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/
+glibc-zoneinfo:
+glibc-zoneinfo: Use the timeconfig utility to set your local time zone.
+glibc-zoneinfo:
+glibc-zoneinfo:
diff --git a/source/l/glibc/timezone-scripts/timeconfig b/source/l/glibc/timezone-scripts/timeconfig
index 33dc89d4..56e786c3 100644
--- a/source/l/glibc/timezone-scripts/timeconfig
+++ b/source/l/glibc/timezone-scripts/timeconfig
@@ -165,6 +165,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Africa/Gaborone" " " \
 "Africa/Harare" " " \
 "Africa/Johannesburg" " " \
+"Africa/Juba" " " \
 "Africa/Kampala" " " \
 "Africa/Khartoum" " " \
 "Africa/Kigali" " " \
@@ -215,6 +216,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "America/Atikokan" " " \
 "America/Atka" " " \
 "America/Bahia" " " \
+"America/Bahia_Banderas" " " \
 "America/Barbados" " " \
 "America/Belem" " " \
 "America/Belize" " " \
@@ -278,19 +280,23 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "America/Kentucky/Louisville" " " \
 "America/Kentucky/Monticello" " " \
 "America/Knox_IN" " " \
+"America/Kralendijk" " " \
 "America/La_Paz" " " \
 "America/Lima" " " \
 "America/Los_Angeles" " " \
 "America/Louisville" " " \
+"America/Lower_Princes" " " \
 "America/Maceio" " " \
 "America/Managua" " " \
 "America/Manaus" " " \
 "America/Marigot" " " \
 "America/Martinique" " " \
+"America/Matamoros" " " \
 "America/Mazatlan" " " \
 "America/Mendoza" " " \
 "America/Menominee" " " \
 "America/Merida" " " \
+"America/Metlakatla" " " \
 "America/Mexico_City" " " \
 "America/Miquelon" " " \
 "America/Moncton" " " \
@@ -303,8 +309,10 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "America/Nipigon" " " \
 "America/Nome" " " \
 "America/Noronha" " " \
+"America/North_Dakota/Beulah" " " \
 "America/North_Dakota/Center" " " \
 "America/North_Dakota/New_Salem" " " \
+"America/Ojinaga" " " \
 "America/Panama" " " \
 "America/Pangnirtung" " " \
 "America/Paramaribo" " " \
@@ -321,12 +329,14 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "America/Resolute" " " \
 "America/Rio_Branco" " " \
 "America/Rosario" " " \
+"America/Santa_Isabel" " " \
 "America/Santarem" " " \
 "America/Santiago" " " \
 "America/Santo_Domingo" " " \
 "America/Sao_Paulo" " " \
 "America/Scoresbysund" " " \
 "America/Shiprock" " " \
+"America/Sitka" " " \
 "America/St_Barthelemy" " " \
 "America/St_Johns" " " \
 "America/St_Kitts" " " \
@@ -349,6 +359,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Antarctica/Casey" " " \
 "Antarctica/Davis" " " \
 "Antarctica/DumontDUrville" " " \
+"Antarctica/Macquarie" " " \
 "Antarctica/Mawson" " " \
 "Antarctica/McMurdo" " " \
 "Antarctica/Palmer" " " \
@@ -385,6 +396,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Asia/Dushanbe" " " \
 "Asia/Gaza" " " \
 "Asia/Harbin" " " \
+"Asia/Hebron" " " \
 "Asia/Ho_Chi_Minh" " " \
 "Asia/Hong_Kong" " " \
 "Asia/Hovd" " " \
@@ -411,6 +423,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Asia/Manila" " " \
 "Asia/Muscat" " " \
 "Asia/Nicosia" " " \
+"Asia/Novokuznetsk" " " \
 "Asia/Novosibirsk" " " \
 "Asia/Omsk" " " \
 "Asia/Oral" " " \
@@ -643,6 +656,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Pacific/Apia" " " \
 "Pacific/Auckland" " " \
 "Pacific/Chatham" " " \
+"Pacific/Chuuk" " " \
 "Pacific/Easter" " " \
 "Pacific/Efate" " " \
 "Pacific/Enderbury" " " \
@@ -668,6 +682,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "Pacific/Pago_Pago" " " \
 "Pacific/Palau" " " \
 "Pacific/Pitcairn" " " \
+"Pacific/Pohnpei" " " \
 "Pacific/Ponape" " " \
 "Pacific/Port_Moresby" " " \
 "Pacific/Rarotonga" " " \
@@ -718,6 +733,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Africa/Gaborone" " " \
 "posix/Africa/Harare" " " \
 "posix/Africa/Johannesburg" " " \
+"posix/Africa/Juba" " " \
 "posix/Africa/Kampala" " " \
 "posix/Africa/Khartoum" " " \
 "posix/Africa/Kigali" " " \
@@ -768,6 +784,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/America/Atikokan" " " \
 "posix/America/Atka" " " \
 "posix/America/Bahia" " " \
+"posix/America/Bahia_Banderas" " " \
 "posix/America/Barbados" " " \
 "posix/America/Belem" " " \
 "posix/America/Belize" " " \
@@ -831,19 +848,23 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/America/Kentucky/Louisville" " " \
 "posix/America/Kentucky/Monticello" " " \
 "posix/America/Knox_IN" " " \
+"posix/America/Kralendijk" " " \
 "posix/America/La_Paz" " " \
 "posix/America/Lima" " " \
 "posix/America/Los_Angeles" " " \
 "posix/America/Louisville" " " \
+"posix/America/Lower_Princes" " " \
 "posix/America/Maceio" " " \
 "posix/America/Managua" " " \
 "posix/America/Manaus" " " \
 "posix/America/Marigot" " " \
 "posix/America/Martinique" " " \
+"posix/America/Matamoros" " " \
 "posix/America/Mazatlan" " " \
 "posix/America/Mendoza" " " \
 "posix/America/Menominee" " " \
 "posix/America/Merida" " " \
+"posix/America/Metlakatla" " " \
 "posix/America/Mexico_City" " " \
 "posix/America/Miquelon" " " \
 "posix/America/Moncton" " " \
@@ -856,8 +877,10 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/America/Nipigon" " " \
 "posix/America/Nome" " " \
 "posix/America/Noronha" " " \
+"posix/America/North_Dakota/Beulah" " " \
 "posix/America/North_Dakota/Center" " " \
 "posix/America/North_Dakota/New_Salem" " " \
+"posix/America/Ojinaga" " " \
 "posix/America/Panama" " " \
 "posix/America/Pangnirtung" " " \
 "posix/America/Paramaribo" " " \
@@ -874,12 +897,14 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/America/Resolute" " " \
 "posix/America/Rio_Branco" " " \
 "posix/America/Rosario" " " \
+"posix/America/Santa_Isabel" " " \
 "posix/America/Santarem" " " \
 "posix/America/Santiago" " " \
 "posix/America/Santo_Domingo" " " \
 "posix/America/Sao_Paulo" " " \
 "posix/America/Scoresbysund" " " \
 "posix/America/Shiprock" " " \
+"posix/America/Sitka" " " \
 "posix/America/St_Barthelemy" " " \
 "posix/America/St_Johns" " " \
 "posix/America/St_Kitts" " " \
@@ -902,6 +927,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Antarctica/Casey" " " \
 "posix/Antarctica/Davis" " " \
 "posix/Antarctica/DumontDUrville" " " \
+"posix/Antarctica/Macquarie" " " \
 "posix/Antarctica/Mawson" " " \
 "posix/Antarctica/McMurdo" " " \
 "posix/Antarctica/Palmer" " " \
@@ -938,6 +964,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Asia/Dushanbe" " " \
 "posix/Asia/Gaza" " " \
 "posix/Asia/Harbin" " " \
+"posix/Asia/Hebron" " " \
 "posix/Asia/Ho_Chi_Minh" " " \
 "posix/Asia/Hong_Kong" " " \
 "posix/Asia/Hovd" " " \
@@ -964,6 +991,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Asia/Manila" " " \
 "posix/Asia/Muscat" " " \
 "posix/Asia/Nicosia" " " \
+"posix/Asia/Novokuznetsk" " " \
 "posix/Asia/Novosibirsk" " " \
 "posix/Asia/Omsk" " " \
 "posix/Asia/Oral" " " \
@@ -1196,6 +1224,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Pacific/Apia" " " \
 "posix/Pacific/Auckland" " " \
 "posix/Pacific/Chatham" " " \
+"posix/Pacific/Chuuk" " " \
 "posix/Pacific/Easter" " " \
 "posix/Pacific/Efate" " " \
 "posix/Pacific/Enderbury" " " \
@@ -1221,6 +1250,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "posix/Pacific/Pago_Pago" " " \
 "posix/Pacific/Palau" " " \
 "posix/Pacific/Pitcairn" " " \
+"posix/Pacific/Pohnpei" " " \
 "posix/Pacific/Ponape" " " \
 "posix/Pacific/Port_Moresby" " " \
 "posix/Pacific/Rarotonga" " " \
@@ -1284,6 +1314,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Africa/Gaborone" " " \
 "right/Africa/Harare" " " \
 "right/Africa/Johannesburg" " " \
+"right/Africa/Juba" " " \
 "right/Africa/Kampala" " " \
 "right/Africa/Khartoum" " " \
 "right/Africa/Kigali" " " \
@@ -1334,6 +1365,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/America/Atikokan" " " \
 "right/America/Atka" " " \
 "right/America/Bahia" " " \
+"right/America/Bahia_Banderas" " " \
 "right/America/Barbados" " " \
 "right/America/Belem" " " \
 "right/America/Belize" " " \
@@ -1397,19 +1429,23 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/America/Kentucky/Louisville" " " \
 "right/America/Kentucky/Monticello" " " \
 "right/America/Knox_IN" " " \
+"right/America/Kralendijk" " " \
 "right/America/La_Paz" " " \
 "right/America/Lima" " " \
 "right/America/Los_Angeles" " " \
 "right/America/Louisville" " " \
+"right/America/Lower_Princes" " " \
 "right/America/Maceio" " " \
 "right/America/Managua" " " \
 "right/America/Manaus" " " \
 "right/America/Marigot" " " \
 "right/America/Martinique" " " \
+"right/America/Matamoros" " " \
 "right/America/Mazatlan" " " \
 "right/America/Mendoza" " " \
 "right/America/Menominee" " " \
 "right/America/Merida" " " \
+"right/America/Metlakatla" " " \
 "right/America/Mexico_City" " " \
 "right/America/Miquelon" " " \
 "right/America/Moncton" " " \
@@ -1422,8 +1458,10 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/America/Nipigon" " " \
 "right/America/Nome" " " \
 "right/America/Noronha" " " \
+"right/America/North_Dakota/Beulah" " " \
 "right/America/North_Dakota/Center" " " \
 "right/America/North_Dakota/New_Salem" " " \
+"right/America/Ojinaga" " " \
 "right/America/Panama" " " \
 "right/America/Pangnirtung" " " \
 "right/America/Paramaribo" " " \
@@ -1440,12 +1478,14 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/America/Resolute" " " \
 "right/America/Rio_Branco" " " \
 "right/America/Rosario" " " \
+"right/America/Santa_Isabel" " " \
 "right/America/Santarem" " " \
 "right/America/Santiago" " " \
 "right/America/Santo_Domingo" " " \
 "right/America/Sao_Paulo" " " \
 "right/America/Scoresbysund" " " \
 "right/America/Shiprock" " " \
+"right/America/Sitka" " " \
 "right/America/St_Barthelemy" " " \
 "right/America/St_Johns" " " \
 "right/America/St_Kitts" " " \
@@ -1468,6 +1508,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Antarctica/Casey" " " \
 "right/Antarctica/Davis" " " \
 "right/Antarctica/DumontDUrville" " " \
+"right/Antarctica/Macquarie" " " \
 "right/Antarctica/Mawson" " " \
 "right/Antarctica/McMurdo" " " \
 "right/Antarctica/Palmer" " " \
@@ -1504,6 +1545,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Asia/Dushanbe" " " \
 "right/Asia/Gaza" " " \
 "right/Asia/Harbin" " " \
+"right/Asia/Hebron" " " \
 "right/Asia/Ho_Chi_Minh" " " \
 "right/Asia/Hong_Kong" " " \
 "right/Asia/Hovd" " " \
@@ -1530,6 +1572,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Asia/Manila" " " \
 "right/Asia/Muscat" " " \
 "right/Asia/Nicosia" " " \
+"right/Asia/Novokuznetsk" " " \
 "right/Asia/Novosibirsk" " " \
 "right/Asia/Omsk" " " \
 "right/Asia/Oral" " " \
@@ -1762,6 +1805,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Pacific/Apia" " " \
 "right/Pacific/Auckland" " " \
 "right/Pacific/Chatham" " " \
+"right/Pacific/Chuuk" " " \
 "right/Pacific/Easter" " " \
 "right/Pacific/Efate" " " \
 "right/Pacific/Enderbury" " " \
@@ -1787,6 +1831,7 @@ if [ "$COLOR" = "on" -o -r $TMP/SeTcolor -o "$T_PX" = "/" ]; then
 "right/Pacific/Pago_Pago" " " \
 "right/Pacific/Palau" " " \
 "right/Pacific/Pitcairn" " " \
+"right/Pacific/Pohnpei" " " \
 "right/Pacific/Ponape" " " \
 "right/Pacific/Port_Moresby" " " \
 "right/Pacific/Rarotonga" " " \
@@ -1889,6 +1934,7 @@ Africa/Freetown
 Africa/Gaborone
 Africa/Harare
 Africa/Johannesburg
+Africa/Juba
 Africa/Kampala
 Africa/Khartoum
 Africa/Kigali
@@ -1939,6 +1985,7 @@ America/Asuncion
 America/Atikokan
 America/Atka
 America/Bahia
+America/Bahia_Banderas
 America/Barbados
 America/Belem
 America/Belize
@@ -2002,19 +2049,23 @@ America/Juneau
 America/Kentucky/Louisville
 America/Kentucky/Monticello
 America/Knox_IN
+America/Kralendijk
 America/La_Paz
 America/Lima
 America/Los_Angeles
 America/Louisville
+America/Lower_Princes
 America/Maceio
 America/Managua
 America/Manaus
 America/Marigot
 America/Martinique
+America/Matamoros
 America/Mazatlan
 America/Mendoza
 America/Menominee
 America/Merida
+America/Metlakatla
 America/Mexico_City
 America/Miquelon
 America/Moncton
@@ -2027,8 +2078,10 @@ America/New_York
 America/Nipigon
 America/Nome
 America/Noronha
+America/North_Dakota/Beulah
 America/North_Dakota/Center
 America/North_Dakota/New_Salem
+America/Ojinaga
 America/Panama
 America/Pangnirtung
 America/Paramaribo
@@ -2045,12 +2098,14 @@ America/Regina
 America/Resolute
 America/Rio_Branco
 America/Rosario
+America/Santa_Isabel
 America/Santarem
 America/Santiago
 America/Santo_Domingo
 America/Sao_Paulo
 America/Scoresbysund
 America/Shiprock
+America/Sitka
 America/St_Barthelemy
 America/St_Johns
 America/St_Kitts
@@ -2073,6 +2128,7 @@ America/Yellowknife
 Antarctica/Casey
 Antarctica/Davis
 Antarctica/DumontDUrville
+Antarctica/Macquarie
 Antarctica/Mawson
 Antarctica/McMurdo
 Antarctica/Palmer
@@ -2109,6 +2165,7 @@ Asia/Dubai
 Asia/Dushanbe
 Asia/Gaza
 Asia/Harbin
+Asia/Hebron
 Asia/Ho_Chi_Minh
 Asia/Hong_Kong
 Asia/Hovd
@@ -2135,6 +2192,7 @@ Asia/Makassar
 Asia/Manila
 Asia/Muscat
 Asia/Nicosia
+Asia/Novokuznetsk
 Asia/Novosibirsk
 Asia/Omsk
 Asia/Oral
@@ -2367,6 +2425,7 @@ PST8PDT
 Pacific/Apia
 Pacific/Auckland
 Pacific/Chatham
+Pacific/Chuuk
 Pacific/Easter
 Pacific/Efate
 Pacific/Enderbury
@@ -2392,6 +2451,7 @@ Pacific/Noumea
 Pacific/Pago_Pago
 Pacific/Palau
 Pacific/Pitcairn
+Pacific/Pohnpei
 Pacific/Ponape
 Pacific/Port_Moresby
 Pacific/Rarotonga
@@ -2442,6 +2502,7 @@ posix/Africa/Freetown
 posix/Africa/Gaborone
 posix/Africa/Harare
 posix/Africa/Johannesburg
+posix/Africa/Juba
 posix/Africa/Kampala
 posix/Africa/Khartoum
 posix/Africa/Kigali
@@ -2492,6 +2553,7 @@ posix/America/Asuncion
 posix/America/Atikokan
 posix/America/Atka
 posix/America/Bahia
+posix/America/Bahia_Banderas
 posix/America/Barbados
 posix/America/Belem
 posix/America/Belize
@@ -2555,19 +2617,23 @@ posix/America/Juneau
 posix/America/Kentucky/Louisville
 posix/America/Kentucky/Monticello
 posix/America/Knox_IN
+posix/America/Kralendijk
 posix/America/La_Paz
 posix/America/Lima
 posix/America/Los_Angeles
 posix/America/Louisville
+posix/America/Lower_Princes
 posix/America/Maceio
 posix/America/Managua
 posix/America/Manaus
 posix/America/Marigot
 posix/America/Martinique
+posix/America/Matamoros
 posix/America/Mazatlan
 posix/America/Mendoza
 posix/America/Menominee
 posix/America/Merida
+posix/America/Metlakatla
 posix/America/Mexico_City
 posix/America/Miquelon
 posix/America/Moncton
@@ -2580,8 +2646,10 @@ posix/America/New_York
 posix/America/Nipigon
 posix/America/Nome
 posix/America/Noronha
+posix/America/North_Dakota/Beulah
 posix/America/North_Dakota/Center
 posix/America/North_Dakota/New_Salem
+posix/America/Ojinaga
 posix/America/Panama
 posix/America/Pangnirtung
 posix/America/Paramaribo
@@ -2598,12 +2666,14 @@ posix/America/Regina
 posix/America/Resolute
 posix/America/Rio_Branco
 posix/America/Rosario
+posix/America/Santa_Isabel
 posix/America/Santarem
 posix/America/Santiago
 posix/America/Santo_Domingo
 posix/America/Sao_Paulo
 posix/America/Scoresbysund
 posix/America/Shiprock
+posix/America/Sitka
 posix/America/St_Barthelemy
 posix/America/St_Johns
 posix/America/St_Kitts
@@ -2626,6 +2696,7 @@ posix/America/Yellowknife
 posix/Antarctica/Casey
 posix/Antarctica/Davis
 posix/Antarctica/DumontDUrville
+posix/Antarctica/Macquarie
 posix/Antarctica/Mawson
 posix/Antarctica/McMurdo
 posix/Antarctica/Palmer
@@ -2662,6 +2733,7 @@ posix/Asia/Dubai
 posix/Asia/Dushanbe
 posix/Asia/Gaza
 posix/Asia/Harbin
+posix/Asia/Hebron
 posix/Asia/Ho_Chi_Minh
 posix/Asia/Hong_Kong
 posix/Asia/Hovd
@@ -2688,6 +2760,7 @@ posix/Asia/Makassar
 posix/Asia/Manila
 posix/Asia/Muscat
 posix/Asia/Nicosia
+posix/Asia/Novokuznetsk
 posix/Asia/Novosibirsk
 posix/Asia/Omsk
 posix/Asia/Oral
@@ -2920,6 +2993,7 @@ posix/PST8PDT
 posix/Pacific/Apia
 posix/Pacific/Auckland
 posix/Pacific/Chatham
+posix/Pacific/Chuuk
 posix/Pacific/Easter
 posix/Pacific/Efate
 posix/Pacific/Enderbury
@@ -2945,6 +3019,7 @@ posix/Pacific/Noumea
 posix/Pacific/Pago_Pago
 posix/Pacific/Palau
 posix/Pacific/Pitcairn
+posix/Pacific/Pohnpei
 posix/Pacific/Ponape
 posix/Pacific/Port_Moresby
 posix/Pacific/Rarotonga
@@ -3008,6 +3083,7 @@ right/Africa/Freetown
 right/Africa/Gaborone
 right/Africa/Harare
 right/Africa/Johannesburg
+right/Africa/Juba
 right/Africa/Kampala
 right/Africa/Khartoum
 right/Africa/Kigali
@@ -3058,6 +3134,7 @@ right/America/Asuncion
 right/America/Atikokan
 right/America/Atka
 right/America/Bahia
+right/America/Bahia_Banderas
 right/America/Barbados
 right/America/Belem
 right/America/Belize
@@ -3121,19 +3198,23 @@ right/America/Juneau
 right/America/Kentucky/Louisville
 right/America/Kentucky/Monticello
 right/America/Knox_IN
+right/America/Kralendijk
 right/America/La_Paz
 right/America/Lima
 right/America/Los_Angeles
 right/America/Louisville
+right/America/Lower_Princes
 right/America/Maceio
 right/America/Managua
 right/America/Manaus
 right/America/Marigot
 right/America/Martinique
+right/America/Matamoros
 right/America/Mazatlan
 right/America/Mendoza
 right/America/Menominee
 right/America/Merida
+right/America/Metlakatla
 right/America/Mexico_City
 right/America/Miquelon
 right/America/Moncton
@@ -3146,8 +3227,10 @@ right/America/New_York
 right/America/Nipigon
 right/America/Nome
 right/America/Noronha
+right/America/North_Dakota/Beulah
 right/America/North_Dakota/Center
 right/America/North_Dakota/New_Salem
+right/America/Ojinaga
 right/America/Panama
 right/America/Pangnirtung
 right/America/Paramaribo
@@ -3164,12 +3247,14 @@ right/America/Regina
 right/America/Resolute
 right/America/Rio_Branco
 right/America/Rosario
+right/America/Santa_Isabel
 right/America/Santarem
 right/America/Santiago
 right/America/Santo_Domingo
 right/America/Sao_Paulo
 right/America/Scoresbysund
 right/America/Shiprock
+right/America/Sitka
 right/America/St_Barthelemy
 right/America/St_Johns
 right/America/St_Kitts
@@ -3192,6 +3277,7 @@ right/America/Yellowknife
 right/Antarctica/Casey
 right/Antarctica/Davis
 right/Antarctica/DumontDUrville
+right/Antarctica/Macquarie
 right/Antarctica/Mawson
 right/Antarctica/McMurdo
 right/Antarctica/Palmer
@@ -3228,6 +3314,7 @@ right/Asia/Dubai
 right/Asia/Dushanbe
 right/Asia/Gaza
 right/Asia/Harbin
+right/Asia/Hebron
 right/Asia/Ho_Chi_Minh
 right/Asia/Hong_Kong
 right/Asia/Hovd
@@ -3254,6 +3341,7 @@ right/Asia/Makassar
 right/Asia/Manila
 right/Asia/Muscat
 right/Asia/Nicosia
+right/Asia/Novokuznetsk
 right/Asia/Novosibirsk
 right/Asia/Omsk
 right/Asia/Oral
@@ -3486,6 +3574,7 @@ right/PST8PDT
 right/Pacific/Apia
 right/Pacific/Auckland
 right/Pacific/Chatham
+right/Pacific/Chuuk
 right/Pacific/Easter
 right/Pacific/Efate
 right/Pacific/Enderbury
@@ -3511,6 +3600,7 @@ right/Pacific/Noumea
 right/Pacific/Pago_Pago
 right/Pacific/Palau
 right/Pacific/Pitcairn
+right/Pacific/Pohnpei
 right/Pacific/Ponape
 right/Pacific/Port_Moresby
 right/Pacific/Rarotonga
diff --git a/source/l/gmp/gmp.SlackBuild b/source/l/gmp/gmp.SlackBuild
index 8fd35296..d8a7ffd9 100755
--- a/source/l/gmp/gmp.SlackBuild
+++ b/source/l/gmp/gmp.SlackBuild
@@ -20,17 +20,20 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2011 by Eric Hameleers <alien at slackware.com> for ARM port.
 
-VERSION=${VERSION:-$(echo gmp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo gmp-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -51,11 +54,22 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 cd $TMP
 rm -rf gmp-$VERSION
-tar xvf $CWD/gmp-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/gmp-$VERSION.tar.xz || exit 1
 cd gmp-$VERSION
 chown -R root:root .
 find . \
@@ -64,6 +78,11 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# End of preparations
+if echo "$*" | grep -qw -- --prep ; then
+  exit 0
+fi
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -72,8 +91,7 @@ CFLAGS="$SLKCFLAGS" \
   --with-gnu-ld \
   --enable-cxx \
   --enable-mpbsd \
-  --enable-mpfr \
-  --build=$ARCH-slackware-linux-gnu
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild
index a200d1cf..477bc823 100755
--- a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild
+++ b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,10 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-$(echo gnome-icon-theme-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=3.4.0	# main package version
+SYMVERS=3.4.0	# gnome-icon-theme-symbolic version
+EXTRAVERS=3.4.0	# gnome-icon-theme-extras version
+
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -50,40 +53,39 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf gnome-icon-theme-$VERSION
-tar xvf $CWD/gnome-icon-theme-$VERSION.tar.?z* || exit 1
-cd gnome-icon-theme-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Use the "old" /usr/lib/pkgconfig instead of the /usr/share/pkgconfig
-zcat $CWD/gnome-icon-theme.pkgconfig.path.diff.gz | patch -p1 --verbose || exit 1
-
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --enable-icon-mapping \
-  --localstatedir=/var/lib || exit 1
 
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-mkdir -p $PKG/usr/doc/gnome-icon-theme-$VERSION
-cp -a \
-  AUTHORS COPYING* NEWS README* TODO \
-  $PKG/usr/doc/gnome-icon-theme-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
+for ICONPKG in gnome-icon-theme-$VERSION gnome-icon-theme-symbolic-$SYMVERS gnome-icon-theme-extras-$EXTRAVERS ; do
+  tar xvf $CWD/$ICONPKG.tar.?z* || exit 1
+  cd $ICONPKG || exit 1
+  chown -R root:root .
+  find . \
+    \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+    -exec chmod 755 {} \; -o \
+    \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+    -exec chmod 644 {} \;
+  ./configure \
+    --prefix=/usr \
+    --libdir=/usr/lib${LIBDIRSUFFIX} \
+    --sysconfdir=/etc \
+    --enable-icon-mapping \
+    --localstatedir=/var/lib || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+  mkdir -p $PKG/usr/doc/$ICONPKG
+  cp -a \
+    AUTHORS COPYING* NEWS README* TODO \
+    $PKG/usr/doc/$ICONPKG
+  if [ -r ChangeLog ]; then
+    cat ChangeLog | head -n 1000 > $PKG/usr/doc/$ICONPKG/ChangeLog
+    touch -r ChangeLog $PKG/usr/doc/$ICONPKG/ChangeLog
+  fi
+  cd ..
+done
+
+# It's a bad idea to ship these in the packages.  If they aren't kept
+# updated, there will be missing icons.  Let the user create them if
+# they care to.
+find $PKG -name icon-theme.cache -exec rm "{}" \;
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff b/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff
deleted file mode 100644
index af072cd8..00000000
--- a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./Makefile.in.orig	2010-08-04 17:51:09.000000000 -0500
-+++ ./Makefile.in	2010-11-06 14:00:00.000000000 -0500
-@@ -229,7 +229,7 @@
- theme_in_files = index.theme.in.in
- theme_DATA = $(theme_in_files:.theme.in.in=.theme)
- THEME_DIRS = $(shell SIZES="$(render_sizes)"; for size in $$SIZES; do for dir in `find $(srcdir)/$(SVGOUTDIR)/$$size/* -type d`; do printf "$$dir,"; done; done; echo "scalable/actions,scalable/apps,scalable/devices,scalable/emblems,scalable/mimetypes,scalable/places,scalable/status")
--pkgconfigdir = $(datadir)/pkgconfig
-+pkgconfigdir = $(libdir)/pkgconfig
- pkgconfig_DATA = gnome-icon-theme.pc
- EXTRA_DIST = \
- 	gnome-icon-theme.pc.in  \
diff --git a/source/l/gnome-keyring/doinst.sh b/source/l/gnome-keyring/doinst.sh
new file mode 100644
index 00000000..c64347e9
--- /dev/null
+++ b/source/l/gnome-keyring/doinst.sh
@@ -0,0 +1 @@
+chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 2>/dev/null
diff --git a/source/l/gnome-keyring/gnome-keyring.SlackBuild b/source/l/gnome-keyring/gnome-keyring.SlackBuild
new file mode 100755
index 00000000..81bc47ab
--- /dev/null
+++ b/source/l/gnome-keyring/gnome-keyring.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/sh
+
+# Slackware build script for gnome-keyring
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gnome-keyring
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+# Fix improper passphrase caching.
+# http://www.openwall.com/lists/oss-security/2012/08/09/2
+zcat $CWD/gpg-agent-Hook-up-the-TTL-cache-option.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/schema-Update-description-for-gpg-cache-method.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/secret-store-Mark-a-secret-item-as-used-when-acces.patch.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --disable-static \
+  --enable-shared \
+  --enable-nls \
+  --disable-debug \
+  --enable-ssh-agent \
+  --with-root-certs=/etc/ssl/certs \
+  --with-pam-dir=/lib/security \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/gconf/gconf.xml.defaults
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS README* COPYING* HACKING INSTALL NEWS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -p -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/gnome-keyring/gpg-agent-Hook-up-the-TTL-cache-option.patch b/source/l/gnome-keyring/gpg-agent-Hook-up-the-TTL-cache-option.patch
new file mode 100644
index 00000000..c1298f75
--- /dev/null
+++ b/source/l/gnome-keyring/gpg-agent-Hook-up-the-TTL-cache-option.patch
@@ -0,0 +1,98 @@
+From 7b65bf04737167fae6b0204d6524215550fcc079 Mon Sep 17 00:00:00 2001
+From: Stef Walter <stefw@gnome.org>
+Date: Wed, 8 Aug 2012 06:06:58 +0200
+Subject: [PATCH] gpg-agent: Hook up the TTL cache option
+
+ * So that when the gsettings gpg-cache-method is 'idle' or 'timeout'
+   we use gpg-cache-ttl to control how long the passphrase is cached
+   for.
+ * This is a regression from 3.3.x
+
+https://bugzilla.gnome.org/show_bug.cgi?id=681081
+---
+ daemon/gpg-agent/gkd-gpg-agent-ops.c | 40 ++++++++++++++++++++++--------------
+ 1 file changed, 25 insertions(+), 15 deletions(-)
+
+diff --git a/daemon/gpg-agent/gkd-gpg-agent-ops.c b/daemon/gpg-agent/gkd-gpg-agent-ops.c
+index a1a21ff..e1c188d 100644
+--- a/daemon/gpg-agent/gkd-gpg-agent-ops.c
++++ b/daemon/gpg-agent/gkd-gpg-agent-ops.c
+@@ -323,17 +323,6 @@ load_unlock_options (GcrPrompt *prompt)
+ 	g_free (method);
+ }
+ 
+-static void
+-save_unlock_options (GcrPrompt *prompt)
+-{
+-	GSettings *settings;
+-
+-	settings = gkd_gpg_agent_settings ();
+-
+-	if (gcr_prompt_get_choice_chosen (prompt))
+-		g_settings_set_string (settings, "gpg-cache-method", GCR_UNLOCK_OPTION_ALWAYS);
+-}
+-
+ static GcrPrompt *
+ open_password_prompt (GckSession *session,
+                       const gchar *keyid,
+@@ -406,11 +395,14 @@ do_get_password (GckSession *session, const gchar *keyid, const gchar *errmsg,
+                  const gchar *prompt_text, const gchar *description, gboolean confirm)
+ {
+ 	GckBuilder builder = GCK_BUILDER_INIT;
++	GSettings *settings;
+ 	GckAttributes *attrs;
+ 	gchar *password = NULL;
+ 	GcrPrompt *prompt;
+ 	gboolean chosen;
+ 	GError *error = NULL;
++	gint lifetime;
++	gchar *method;
+ 
+ 	g_assert (GCK_IS_SESSION (session));
+ 
+@@ -431,21 +423,39 @@ do_get_password (GckSession *session, const gchar *keyid, const gchar *errmsg,
+ 	}
+ 
+ 	if (password != NULL && keyid != NULL) {
++		settings = gkd_gpg_agent_settings ();
+ 
+ 		/* Load up the save options */
+ 		chosen = gcr_prompt_get_choice_chosen (prompt);
+ 
+-		if (chosen)
++		if (chosen) {
++			g_settings_set_string (settings, "gpg-cache-method", GCR_UNLOCK_OPTION_ALWAYS);
+ 			gck_builder_add_string (&builder, CKA_G_COLLECTION, "login");
+-		else
++
++		} else {
++			method = g_settings_get_string (settings, "gpg-cache-method");
++			lifetime = g_settings_get_int (settings, "gpg-cache-ttl");
++
++			if (g_strcmp0 (method, GCR_UNLOCK_OPTION_IDLE) == 0) {
++				gck_builder_add_boolean (&builder, CKA_GNOME_TRANSIENT, TRUE);
++				gck_builder_add_ulong (&builder, CKA_G_DESTRUCT_IDLE, lifetime);
++
++			} else if (g_strcmp0 (method, GCR_UNLOCK_OPTION_TIMEOUT) == 0) {
++				gck_builder_add_boolean (&builder, CKA_GNOME_TRANSIENT, TRUE);
++				gck_builder_add_ulong (&builder, CKA_G_DESTRUCT_AFTER, lifetime);
++
++			} else if (g_strcmp0 (method, GCR_UNLOCK_OPTION_SESSION)){
++				g_message ("Unsupported gpg-cache-method setting: %s", method);
++			}
++
+ 			gck_builder_add_string (&builder, CKA_G_COLLECTION, "session");
++			g_free (method);
++		}
+ 
+ 		/* Now actually save the password */
+ 		attrs = gck_attributes_ref_sink (gck_builder_end (&builder));
+ 		do_save_password (session, keyid, description, password, attrs);
+ 		gck_attributes_unref (attrs);
+-
+-		save_unlock_options (prompt);
+ 	}
+ 
+ 	g_clear_object (&prompt);
+-- 
+1.7.11.2
\ No newline at end of file
diff --git a/source/l/gnome-keyring/schema-Update-description-for-gpg-cache-method.patch b/source/l/gnome-keyring/schema-Update-description-for-gpg-cache-method.patch
new file mode 100644
index 00000000..12b6fb2d
--- /dev/null
+++ b/source/l/gnome-keyring/schema-Update-description-for-gpg-cache-method.patch
@@ -0,0 +1,30 @@
+From 6387fb065d5ea16c777a0aee05b22c3cc6a0f73c Mon Sep 17 00:00:00 2001
+From: Stef Walter <stefw@gnome.org>
+Date: Wed, 8 Aug 2012 06:06:24 +0200
+Subject: [PATCH] schema: Update description for gpg-cache-method
+
+ * Document the various method strings that can be present here
+
+https://bugzilla.gnome.org/show_bug.cgi?id=681081
+---
+ schema/org.gnome.crypto.cache.gschema.xml | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/schema/org.gnome.crypto.cache.gschema.xml b/schema/org.gnome.crypto.cache.gschema.xml
+index 9a431eb..4547399 100644
+--- a/schema/org.gnome.crypto.cache.gschema.xml
++++ b/schema/org.gnome.crypto.cache.gschema.xml
+@@ -3,7 +3,10 @@
+ 		<key name="gpg-cache-method" type="s">
+ 			<default>'session'</default>
+ 			<summary>Cache Method</summary>
+-			<description>The method to use for caching passphrases typed into the GPG agent.</description>
++			<description>The method to use for caching passphrases typed into the GPG agent.
++			Should be one of: 'always' caches permanently, 'session' caches until session end,
++			'idle' caches until the not used for gpg-cache-ttl seconds, 'timeout' caches until
++			gpg-cache-ttl seconds.</description>
+ 		</key>
+ 		<key name="gpg-cache-ttl" type="i">
+ 			<default>300</default>
+-- 
+1.7.11.2
\ No newline at end of file
diff --git a/source/l/gnome-keyring/secret-store-Mark-a-secret-item-as-used-when-acces.patch b/source/l/gnome-keyring/secret-store-Mark-a-secret-item-as-used-when-acces.patch
new file mode 100644
index 00000000..1785b0cd
--- /dev/null
+++ b/source/l/gnome-keyring/secret-store-Mark-a-secret-item-as-used-when-acces.patch
@@ -0,0 +1,26 @@
+From d96c49f0bf1710b69a354f4bdebf6b53bf5cb0bc Mon Sep 17 00:00:00 2001
+From: Stef Walter <stefw@gnome.org>
+Date: Wed, 8 Aug 2012 15:08:22 +0200
+Subject: [PATCH] secret-store: Mark a secret item as 'used' when accessed
+
+ * This makes the gpg-agent idle feature work correctly
+
+https://bugzilla.gnome.org/show_bug.cgi?id=681081
+---
+ pkcs11/secret-store/gkm-secret-item.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/pkcs11/secret-store/gkm-secret-item.c b/pkcs11/secret-store/gkm-secret-item.c
+index 35698da..d7cbdb3 100644
+--- a/pkcs11/secret-store/gkm-secret-item.c
++++ b/pkcs11/secret-store/gkm-secret-item.c
+@@ -224,6 +224,7 @@ gkm_secret_item_real_get_attribute (GkmObject *base, GkmSession *session, CK_ATT
+ 		identifier = gkm_secret_object_get_identifier (GKM_SECRET_OBJECT (self));
+ 		secret = gkm_secret_data_get_raw (sdata, identifier, &n_secret);
+ 		rv = gkm_attribute_set_data (attr, secret, n_secret);
++		gkm_object_mark_used (base);
+ 		g_object_unref (sdata);
+ 		return rv;
+ 
+-- 
+1.7.11.2
\ No newline at end of file
diff --git a/source/l/gnome-keyring/slack-desc b/source/l/gnome-keyring/slack-desc
new file mode 100644
index 00000000..33e06ef9
--- /dev/null
+++ b/source/l/gnome-keyring/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+gnome-keyring: GNOME Keyring (a tool to handle security credentials)
+gnome-keyring:
+gnome-keyring: GNOME Keyring is a program designed to take care of the user's
+gnome-keyring: security credentials, such as user names and passwords, in an
+gnome-keyring: easy to access manner.  The keyring is implemented as a daemon
+gnome-keyring: and uses the process name gnome-keyring-daemon.
+gnome-keyring:
+gnome-keyring:
+gnome-keyring:
+gnome-keyring:
+gnome-keyring:
diff --git a/source/l/gobject-introspection/gobject-introspection.SlackBuild b/source/l/gobject-introspection/gobject-introspection.SlackBuild
new file mode 100755
index 00000000..7dcd4fda
--- /dev/null
+++ b/source/l/gobject-introspection/gobject-introspection.SlackBuild
@@ -0,0 +1,132 @@
+#!/bin/sh
+
+# Slackware build script for gobject-introspection
+
+# Copyright 2009 Andrew Psaltis <ampsaltis@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS:wOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gobject-introspection
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib$LIBDIRSUFFIX \
+  --mandir=/usr/man \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS CONTRIBUTORS COPYING* NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/gobject-introspection/slack-desc b/source/l/gobject-introspection/slack-desc
new file mode 100644
index 00000000..ca41d8c8
--- /dev/null
+++ b/source/l/gobject-introspection/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+                     |-----handy-ruler------------------------------------------------------|
+gobject-introspection: gobject-introspection (GObject interface introspection library)
+gobject-introspection:
+gobject-introspection: GObject Introspection is a project for providing machine readable
+gobject-introspection: introspection data of the API of C libraries. This introspection data
+gobject-introspection: can be used for automatic code generation for bindings, API
+gobject-introspection: verification, and documentation generation.
+gobject-introspection:
+gobject-introspection: For more information, check out:
+gobject-introspection:   http://live.gnome.org/GObjectIntrospection
+gobject-introspection:
+gobject-introspection:
diff --git a/source/l/grantlee/grantlee.SlackBuild b/source/l/grantlee/grantlee.SlackBuild
new file mode 100755
index 00000000..f4429059
--- /dev/null
+++ b/source/l/grantlee/grantlee.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Copyright 2010, 2011  Eric Hameleers, Eindhoven, NL
+# Copyright 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=grantlee
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+mkdir -p build
+cd build
+  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \
+  PATH=$QTDIR/bin:$PATH \
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+   make $NUMJOBS || make || exit 1
+   make install DESTDIR=$PKG || exit 1
+cd -
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a AUTHORS CHANGELOG COPYING* GOALS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/grantlee/slack-desc b/source/l/grantlee/slack-desc
new file mode 100644
index 00000000..445d1419
--- /dev/null
+++ b/source/l/grantlee/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler-------------------------------------------------------|
+grantlee: grantlee (string template engine)
+grantlee: 
+grantlee: Grantlee is a plugin based String Template system written using the
+grantlee: Qt framework.  The goals of the project are to make it easier for
+grantlee: application developers to separate the structure of documents from
+grantlee: the data they contain, opening the door for theming.
+grantlee:
+grantlee: Homepage: http://gitorious.org/grantlee/
+grantlee:
+grantlee:
+grantlee:
diff --git a/source/l/gsettings-desktop-schemas/doinst.sh b/source/l/gsettings-desktop-schemas/doinst.sh
new file mode 100644
index 00000000..2890b5be
--- /dev/null
+++ b/source/l/gsettings-desktop-schemas/doinst.sh
@@ -0,0 +1 @@
+chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 1> /dev/null 2> /dev/null
diff --git a/source/l/gsettings-desktop-schemas/gsettings-desktop-schemas.SlackBuild b/source/l/gsettings-desktop-schemas/gsettings-desktop-schemas.SlackBuild
new file mode 100755
index 00000000..e85ea1ce
--- /dev/null
+++ b/source/l/gsettings-desktop-schemas/gsettings-desktop-schemas.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for gsettings-desktop-schemas
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gsettings-desktop-schemas
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING MAINTAINERS NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/gsettings-desktop-schemas/slack-desc b/source/l/gsettings-desktop-schemas/slack-desc
new file mode 100644
index 00000000..4d0d3b95
--- /dev/null
+++ b/source/l/gsettings-desktop-schemas/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                         |-----handy-ruler------------------------------------------------------|
+gsettings-desktop-schemas: gsettings-desktop-schemas (GSettings schemas)
+gsettings-desktop-schemas:
+gsettings-desktop-schemas: gsettings-desktop-schemas contains a collection of GSettings schemas 
+gsettings-desktop-schemas: for settings shared by various components of a desktop.
+gsettings-desktop-schemas:
+gsettings-desktop-schemas: 
+gsettings-desktop-schemas:
+gsettings-desktop-schemas:
+gsettings-desktop-schemas:
+gsettings-desktop-schemas:
+gsettings-desktop-schemas:
diff --git a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild
index e6e3c84c..4081e96d 100755
--- a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild
+++ b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild
@@ -26,7 +26,7 @@
 
 PKGNAM=gst-plugins-base
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -92,10 +92,20 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
diff --git a/source/l/gst-plugins-good/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff b/source/l/gst-plugins-good/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff
deleted file mode 100644
index 7c896090..00000000
--- a/source/l/gst-plugins-good/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./sys/v4l2/gstv4l2object.c.orig	2011-03-08 07:56:07.000000000 -0600
-+++ ./sys/v4l2/gstv4l2object.c	2011-04-15 22:19:11.802999999 -0500
-@@ -2019,7 +2019,7 @@
-     /* ideally we would differentiate between types of interlaced video
-      * but there is not sufficient information in the caps..
-      */
--    field = V4L2_FIELD_SEQ_TB;
-+    field = V4L2_FIELD_INTERLACED;
-   } else {
-     GST_DEBUG_OBJECT (v4l2object->element, "progressive video");
-     field = V4L2_FIELD_NONE;
diff --git a/source/l/gst-plugins-good/gst-plugins-good.SlackBuild b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild
index 112ebe0b..0db2baa8 100755
--- a/source/l/gst-plugins-good/gst-plugins-good.SlackBuild
+++ b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild
@@ -26,7 +26,7 @@
 
 PKGNAM=gst-plugins-good
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -68,8 +68,6 @@ rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION
 
-zcat $CWD/gst-plugins-good.6b86b56abd8a28b9e94cee679e3d86367a9a0ab3.diff.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -112,7 +110,7 @@ fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \
+  AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/l/gstreamer/gstreamer.SlackBuild b/source/l/gstreamer/gstreamer.SlackBuild
index 293b90fa..83d959cb 100755
--- a/source/l/gstreamer/gstreamer.SlackBuild
+++ b/source/l/gstreamer/gstreamer.SlackBuild
@@ -100,14 +100,24 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL MAINTAINERS NEWS README* RELEASE TODO \
+  AUTHORS COPYING* INSTALL MAINTAINERS NEWS README* RELEASE TODO \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/l/gtk+2/gtk+2.SlackBuild b/source/l/gtk+2/gtk+2.SlackBuild
index efda2839..9fff68c4 100755
--- a/source/l/gtk+2/gtk+2.SlackBuild
+++ b/source/l/gtk+2/gtk+2.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -99,7 +99,7 @@ CFLAGS="$SLKCFLAGS -DHOST='"'"${ARCH}-slackware-linux"'"'" \
   --mandir=/usr/man \
   --with-xinput=yes \
   --enable-xkb \
-  --disable-introspection \
+  --enable-introspection \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -116,13 +116,6 @@ make install \
   DESTDIR=$PKG \
   || exit 1
 
-# You'll probably need to install the newly made package right away to
-# fix the result of this next line, but we had to clear this.  Sorry.
-rm -rf /etc/gtk-2.0
-# I'm spamming your root partition because /etc/gtk-2.0 won't install to $DESTDIR...
-make install 
-cp -a /etc/gtk-2.0/* $PKG/etc/gtk-2.0/ || exit 1
-rm -rf $PKG/etc/gtk-2.0/$host
 mkdir -p $PKG/etc/gtk-2.0/$host
 mv $PKG/etc/gtk-2.0/gtk.immodules $PKG/etc/gtk-2.0/$host/
 
diff --git a/source/l/gtk+3/doinst.sh b/source/l/gtk+3/doinst.sh
new file mode 100644
index 00000000..90d1085f
--- /dev/null
+++ b/source/l/gtk+3/doinst.sh
@@ -0,0 +1,28 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/gtk-3.0/gtkrc.new
+config etc/gtk-3.0/im-multipress.conf.new
+rm -f etc/gtk-3.0/gtkrc.new
+
+chroot . rm -f /usr/share/icons/*/icon-theme.cache 1> /dev/null 2> /dev/null
+
+# Run this if we are on an installed system.  Otherwise it will be
+# handled on first boot.
+if [ -x /usr/bin/update-gtk-immodules-3.0 ]; then
+  /usr/bin/update-gtk-immodules-3.0
+fi
+
+# In case this is the first run installing the standalone gdk-pixbuf,
+# we will run this a second time to fix machines that will not reboot.
+chroot . /usr/bin/update-gdk-pixbuf-loaders 1> /dev/null 2> /dev/null
+
diff --git a/source/l/gtk+3/gtk+3.SlackBuild b/source/l/gtk+3/gtk+3.SlackBuild
new file mode 100755
index 00000000..c4e972eb
--- /dev/null
+++ b/source/l/gtk+3/gtk+3.SlackBuild
@@ -0,0 +1,188 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-gtk3
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf gtk+-$VERSION
+tar xvf $CWD/gtk+-$VERSION.tar.?z* || exit 1
+cd gtk+-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Use /etc/gtk-3.0/$ARCH-slackware-linux instead of /etc/gtk-3.0/ for gtk.immodules
+zcat $CWD/use_host_triplet_for_gtk_immodules.diff.gz | patch -p1 --verbose || exit 1
+
+# Regenerate ./configure:
+libtoolize --copy --force
+autoreconf -vif
+
+# Autoconf changes linux to linux-gnu.
+# Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu:
+sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub
+
+CFLAGS="$SLKCFLAGS -DHOST='"'"${ARCH}-slackware-linux"'"'" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --enable-xkb \
+  --build=$ARCH-slackware-linux \
+  --host=$ARCH-slackware-linux \
+  --target=$ARCH-slackware-linux
+#  --enable-gtk-doc-html=no \
+
+# See modules/input/Makefile.am
+make \
+  imconffiledir=/etc/gtk-3.0/$ARCH-slackware-linux \
+  $NUMJOBS || make || exit 1
+
+# Check the host value that is passed to the compile to the one in this script:
+host="$ARCH-slackware-linux"
+# Best I can tell, it doesn't matter if they match.  Since gtk+3-3.2.0, both
+# build_triplet and host_triplet have "-gnu" appended to them, but neither of
+# those seem to actually be used anywhere.  Commenting out unless I find out
+# that I'm wrong later...  :-)   --rworkman
+#compile_host=$(grep 'host_triplet =' gtk/Makefile | sed -e "s/.* = //")
+#if [ "x$compile_host" != "x$host" ]; then
+#  echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1
+#fi
+
+make install \
+  imconffiledir=/etc/gtk-3.0/$ARCH-slackware-linux \
+  RUN_QUERY_IMMODULES_TEST=false RUN_QUERY_LOADER_TEST=false \
+  DESTDIR=$PKG \
+  || exit 1
+
+# You'll probably need to install the newly made package right away to
+# fix the result of this next line, but we had to clear this.  Sorry.
+rm -rf /etc/gtk-3.0
+# I'm spamming your root partition because /etc/gtk-3.0 won't install to $DESTDIR...
+make install imconffiledir=/etc/gtk-3.0/$ARCH-slackware-linux
+cp -a /etc/gtk-3.0 $PKG/etc || exit 1
+mv $PKG/etc/gtk-3.0/$host/im-multipress.conf $PKG/etc/gtk-3.0/im-multipress.conf.new
+rm -f $PKG/etc/gtk-3.0/$host/*
+if [ -r $PKG/etc/gtk-3.0/gtk.immodules ]; then
+  mv $PKG/etc/gtk-3.0/gtk.immodules $PKG/etc/gtk-3.0/$host/
+fi
+
+# Install a "starter" gtkrc
+echo 'gtk-theme-name="GTK+"' > $PKG/etc/gtk-3.0/gtkrc.new
+
+# We need to have separate 32-bit and 64-bit binaries
+# for places where we have two copies of the GTK+ package installed.
+# (we might have x86_64 and i486 packages on the same system, for example.)
+case "$host" in
+  s390x*|x86_64*)
+   mv $PKG/usr/bin/gtk-query-immodules-3.0{,-64}
+   ( cd $PKG/usr/bin
+     ln -sf gtk-query-immodules-3.0-64 gtk-query-immodules-3.0
+   )
+   ;;
+  *)
+   mv $PKG/usr/bin/gtk-query-immodules-3.0{,-32}
+   ( cd $PKG/usr/bin
+     ln -sf gtk-query-immodules-3.0-32 gtk-query-immodules-3.0
+   )
+   ;;
+esac
+
+# Install wrappers for the binaries:
+cp $CWD/update-gtk-immodules-3.0 $PKG/usr/bin/update-gtk-immodules-3.0
+chmod 0755 $PKG/usr/bin/update-*
+
+find $PKG | xargs file | egrep "executable|shared object" | grep "ELF" | \
+  cut -d: -f1 | xargs strip --strip-unneeded 2>/dev/null
+
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+    done
+  )
+fi
+
+# Copy extra documentation into package.
+mkdir -p $PKG/usr/doc/gtk+3-$VERSION
+cp -a \
+  AUTHORS COPYING NEWS README \
+  $PKG/usr/doc/gtk+3-$VERSION
+( cd $PKG/usr/doc/gtk+3-$VERSION
+  ln -s /usr/share/gtk-doc/html/gail-libgail-util .
+  ln -s /usr/share/gtk-doc/html/gdk .
+  ln -s /usr/share/gtk-doc/html/gtk .
+)
+find $PKG/usr/doc/gtk+3-$VERSION/ -type f -exec chmod 644 {} \;
+chown -R root:root $PKG/usr/doc/gtk+3-$VERSION
+
+mkdir -p $PKG/install 
+zcat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -p -l y -c n $TMP/gtk+3-${VERSION}-$ARCH-${BUILD}.txz
diff --git a/source/l/gtk+3/slack-desc b/source/l/gtk+3/slack-desc
new file mode 100644
index 00000000..47816927
--- /dev/null
+++ b/source/l/gtk+3/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+gtk+3: GTK+ version 3 (multi-platform GUI toolkit)
+gtk+3:
+gtk+3: This is GTK+, a multi-platform toolkit for creating graphical user
+gtk+3: interfaces.  Offering a complete set of widgets, GTK+ is suitable for
+gtk+3: projects ranging from small one-off projects to complete application
+gtk+3: suites.
+gtk+3:
+gtk+3:
+gtk+3:
+gtk+3:
+gtk+3:
diff --git a/source/l/gtk+3/update-gtk-immodules-3.0 b/source/l/gtk+3/update-gtk-immodules-3.0
new file mode 100644
index 00000000..06a70564
--- /dev/null
+++ b/source/l/gtk+3/update-gtk-immodules-3.0
@@ -0,0 +1,86 @@
+#! /bin/sh
+# Updates the immodules in /etc/gtk-3.0/$host
+
+umask 022
+
+# Get the machine type from uname:
+host=$(uname -m)-slackware-linux
+ 
+# Fix $host for arm arch:
+case "$host" in
+  arm*) host=arm-slackware-linux-gnueabi ;;
+esac
+
+# Deriving /etc/gtk-3.0/$host location
+#
+# We have had problems in the past with build systems
+# changing host from i386 to i686 and appending/dropping
+# the -gnu suffix, so try to match up the $host we got
+# with whats actually there.
+if [ ! -d /etc/gtk-3.0/$host ]; then
+   case "$host" in
+     i?86*)
+         for d in $(ls -d /etc/gtk-3.0/i?86*); do
+           host=$(basename $d)
+           break
+         done
+     ;;
+   esac
+fi
+
+FILE=/etc/gtk-3.0/$host/gtk.immodules
+
+case "$host" in
+  s390x*|x86_64*)
+   if [ -x /usr/bin/gtk-query-immodules-3.0-64 ]; then
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating gtk.immodules for ${host}:"
+       echo "  /usr/bin/gtk-query-immodules-3.0-64 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/gtk-query-immodules-3.0-64 > $FILE
+     # Check for x86_64 multilib:
+     if ls -d /etc/gtk-3.0/i?86* 1> /dev/null 2> /dev/null ; then
+       for d in $(ls -d /etc/gtk-3.0/i?86*); do
+         mlhost=$(basename $d)
+         break
+       done
+       if [ -r /etc/gtk-3.0/$mlhost/gtk.immodules -a \
+       -x /usr/bin/gtk-query-immodules-3.0-32 ]; then
+         FILE=/etc/gtk-3.0/$mlhost/gtk.immodules
+         if [ "$1" = "--verbose" ]; then
+           echo "Updating gtk.immodules for ${mlhost}:"
+           echo "  /usr/bin/gtk-query-immodules-3.0-32 \\"
+           echo "  > $FILE"
+         fi
+         /usr/bin/gtk-query-immodules-3.0-32 > $FILE
+       fi
+     fi
+   else
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating gtk.immodules for ${host}:"
+       echo "  /usr/bin/gtk-query-immodules-3.0 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/gtk-query-immodules-3.0 > $FILE
+   fi
+   ;;
+  *)
+   if [ -x /usr/bin/gtk-query-immodules-3.0-32 ]; then
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating gtk.immodules for ${host}:"
+       echo "  /usr/bin/gtk-query-immodules-3.0-32 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/gtk-query-immodules-3.0-32 > $FILE
+   else
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating gtk.immodules for ${host}:"
+       echo "  /usr/bin/gtk-query-immodules-3.0 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/gtk-query-immodules-3.0 > $FILE
+   fi
+   ;;
+esac
+
diff --git a/source/l/gtk+3/use_host_triplet_for_gtk_immodules.diff b/source/l/gtk+3/use_host_triplet_for_gtk_immodules.diff
new file mode 100644
index 00000000..92a8a121
--- /dev/null
+++ b/source/l/gtk+3/use_host_triplet_for_gtk_immodules.diff
@@ -0,0 +1,11 @@
+diff -Nur gtk+-3.0.12.orig//gtk/Makefile.am gtk+-3.0.12/gtk/Makefile.am
+--- gtk+-3.0.12.orig//gtk/Makefile.am	2011-07-27 20:34:32.000000000 -0500
++++ gtk+-3.0.12/gtk/Makefile.am	2011-08-03 20:35:55.780035282 -0500
+@@ -37,6 +37,7 @@
+ 	-DGTK_LIBDIR=\"$(libdir)\"			\
+ 	-DGTK_DATADIR=\"$(datadir)\"			\
+ 	-DGTK_DATA_PREFIX=\"$(prefix)\"			\
++	-DHOST=\"$(host_triplet)\"			\
+ 	-DGTK_SYSCONFDIR=\"$(sysconfdir)\"		\
+ 	-DGTK_VERSION=\"$(GTK_VERSION)\"		\
+ 	-DGTK_BINARY_VERSION=\"$(GTK_BINARY_VERSION)\"	\
diff --git a/source/l/gvfs/doinst.sh b/source/l/gvfs/doinst.sh
new file mode 100644
index 00000000..697dafc5
--- /dev/null
+++ b/source/l/gvfs/doinst.sh
@@ -0,0 +1,4 @@
+# Try to run these.  If they fail, no biggie.
+chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 1> /dev/null 2> /dev/null
+chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ 1> /dev/null 2> /dev/null
+
diff --git a/source/l/gvfs/gvfs.SlackBuild b/source/l/gvfs/gvfs.SlackBuild
new file mode 100755
index 00000000..47bdfce0
--- /dev/null
+++ b/source/l/gvfs/gvfs.SlackBuild
@@ -0,0 +1,132 @@
+#!/bin/sh
+
+# Copyright 2009-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gvfs
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-gtk-doc \
+  --disable-hal \
+  --build=$ARCH-$PKGNAM-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't set AutoMount to true for network volumes.  Doing so leads to long
+# delays in Thunar.  Users may click the network button in Thunar to mount
+# them instead.
+sed -i -e "s/AutoMount=true/AutoMount=false/g" $PKG/usr/share/gvfs/mounts/network.mount
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+mkdir -p $PKG/etc/bash_completion.d/
+mv $PKG/etc/profile.d/gvfs-bash-completion.sh \
+  $PKG/etc/bash_completion.d/gvfs
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL MAINTAINERS NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/gvfs/slack-desc b/source/l/gvfs/slack-desc
new file mode 100644
index 00000000..8d8cd045
--- /dev/null
+++ b/source/l/gvfs/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler--------------------------------------------------------|
+gvfs: gvfs (glib virtual filesystems)
+gvfs:
+gvfs: gvfs is a userspace virtual filesystem designed to work with the I/O
+gvfs: abstractions of libgio (a library included in the glib2 package).
+gvfs: It installs several modules that are automatically used by applications
+gvfs: that use the libgio API.  There is also fuse support that allows
+gvfs: applications not using gio to access the gvfs filesystems.
+gvfs:
+gvfs:
+gvfs:
+gvfs:
diff --git a/source/l/hal-info/hal-info.SlackBuild b/source/l/hal-info/hal-info.SlackBuild
deleted file mode 100755
index 5f527f58..00000000
--- a/source/l/hal-info/hal-info.SlackBuild
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/sh
-
-# Copyright 2007-2010  Robby Workman, Northport, AL, USA
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=hal-info
-VERSION=${VERSION:-20091130}
-ARCH=noarch
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP || exit 1
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Apply a couple of patches from git
-zcat $CWD/patches/quirk-LG_X110-keyboard.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/quirk-acer_aspire_hotkey.patch.gz | patch -p1 --verbose || exit 1
-
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  || exit 1
-
-make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING* HACKING INSTALL NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch b/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch
deleted file mode 100644
index 330b8699..00000000
--- a/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-commit 1a3c7c28d028c0952404d6d45b58138849c09ff1
-Author: Ozan Çağlayan <ozan@pardus.org.tr>
-Date:   Wed Dec 23 10:13:26 2009 +0200
-
-    Add keymap quirks for LG X110
-    
-    The patch adds keyboard quirks for LG X110 (An MSI Wind clone) which has
-    the following DMI informations:
-    
-    system.hardware.primary_video.product = 10158  (0x27ae)  (int)
-    system.hardware.primary_video.vendor = 32902  (0x8086)  (int)
-    system.hardware.product = 'X110-L.A7M3F3'  (string)
-    system.hardware.serial = '812MSVJ025279'  (string)
-    system.hardware.uuid = '00000000-0000-0000-0000-002185569235' (string)
-    system.hardware.vendor = 'LG Electronics'  (string)
-    system.hardware.version = 'Ver.001'  (string)
-    
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-diff --git a/fdi/information/10freedesktop/30-keymap-misc.fdi b/fdi/information/10freedesktop/30-keymap-misc.fdi
-index c4e527e..39d71ed 100644
---- a/fdi/information/10freedesktop/30-keymap-misc.fdi
-+++ b/fdi/information/10freedesktop/30-keymap-misc.fdi
-@@ -103,6 +103,22 @@
-         </match>
-       </match>
- 
-+      <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="LG">
-+        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="X110">
-+          <append key="input.keymap.data" type="strlist">e020:mute</append> <!-- Fn-F9   Sound On/Off -->
-+          <append key="input.keymap.data" type="strlist">e02e:volumedown</append> <!-- Fn-Left   Volume down -->
-+          <append key="input.keymap.data" type="strlist">e02f:search</append> <!-- Fn-F3   Search -->
-+          <append key="input.keymap.data" type="strlist">e030:volumeup</append> <!-- Fn-Right   Volume up -->
-+          <append key="input.keymap.data" type="strlist">e031:battery</append> <!-- Fn-F10   Info -->
-+          <append key="input.keymap.data" type="strlist">e033:suspend</append> <!-- Fn-F12   Hibernate -->
-+          <append key="input.keymap.data" type="strlist">e05f:sleep</append> <!-- Fn-F4   Sleep -->
-+          <append key="input.keymap.data" type="strlist">e064:f22</append> <!-- Fn-F5   Touchpad disable -->
-+          <append key="input.keymap.data" type="strlist">e076:wlan</append> <!-- Fn-F6   satellite dish1 -->
-+          <append key="input.keymap.data" type="strlist">e077:brightnessdown</append> <!-- Fn-Down   Brightness down -->
-+          <append key="input.keymap.data" type="strlist">e078:brightnessup</append> <!-- Fn-Up   Brightness up -->
-+        </match>
-+      </match>
-+
-       <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" string="MEDIONNB">
-         <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" prefix="A555">
-           <append key="input.keymap.data" type="strlist">63:www</append> <!-- N button -->
diff --git a/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch b/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch
deleted file mode 100644
index 390fc7fe..00000000
--- a/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-commit 16e1c1921e089a4b53940b6b265fc72446d28254
-Author: Keng-Yu Lin <keng-yu.lin@canonical.com>
-Date:   Wed Sep 16 15:08:05 2009 +0800
-
-    Add hotkey quirk for Acer Aspire One (AO531h/AO751h)
-    
-    To prevent the brightness adjustment OSD from showing when disabling the bluetooth.
-    
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-diff --git a/fdi/information/10freedesktop/30-keymap-acer.fdi b/fdi/information/10freedesktop/30-keymap-acer.fdi
-index a2cf8d8..4511bff 100644
---- a/fdi/information/10freedesktop/30-keymap-acer.fdi
-+++ b/fdi/information/10freedesktop/30-keymap-acer.fdi
-@@ -61,6 +61,10 @@
-           <append key="input.keymap.data" type="strlist">e012:prog2</append> 
-           <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off -->
-         </match>
-+        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains_outof="AO751h;AO531h">
-+          <remove key="input.keymap.data" type="strlist">e059:brightnessup</remove>
-+          <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off -->
-+        </match>
-       </match>
-     </match>
-   </device>
diff --git a/source/l/hal-info/slack-desc b/source/l/hal-info/slack-desc
deleted file mode 100644
index 0de31353..00000000
--- a/source/l/hal-info/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler-------------------------------------------------------|
-hal-info: hal-info (device information for HAL)
-hal-info:
-hal-info: The hal-info package contains device information for HAL, a Hardware
-hal-info: Abstraction Layer.
-hal-info:
-hal-info: For more info, see:  http://www.freedesktop.org/Software/hal
-hal-info:
-hal-info:
-hal-info:
-hal-info:
-hal-info:
diff --git a/source/l/hal/doinst.sh b/source/l/hal/doinst.sh
deleted file mode 100644
index a1c86cf4..00000000
--- a/source/l/hal/doinst.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.hald.new:
-if [ -e etc/rc.d/rc.hald ]; then
-  cp -a etc/rc.d/rc.hald etc/rc.d/rc.hald.new.incoming
-  cat etc/rc.d/rc.hald.new > etc/rc.d/rc.hald.new.incoming
-  mv etc/rc.d/rc.hald.new.incoming etc/rc.d/rc.hald.new
-fi
-
-config etc/rc.d/rc.hald.new
-config etc/dbus-1/system.d/hal.conf.new
-
diff --git a/source/l/hal/hal.SlackBuild b/source/l/hal/hal.SlackBuild
deleted file mode 100755
index 57d9e3bc..00000000
--- a/source/l/hal/hal.SlackBuild
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/bin/sh
-
-# Copyright 2007  Ole Andre Rodlie <olear@slackforge.net>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=hal
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
-
-NUMJOBS=${NUMJOBS:--j7}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP || exit 1
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Restore the DontZap defaults from lore
-zcat $CWD/patches/10-keymap.fdi-restore_zap.diff.gz | patch -p1 --verbose || exit 1
-
-# Oops, a freebsd-specific commit wasn't  :-)
-zcat $CWD/patches/fix_libusb_detection.diff.gz | patch -p1 --verbose || exit 1
-
-# Fix a segfault -- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068
-zcat $CWD/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz | patch -p1 --verbose || exit 1
-
-# Increase PATH_HAL_MAX to 4096 to avoid crashes
-# https://bugs.freedesktop.org/show_bug.cgi?id=25888
-zcat $CWD/patches/increase_HAL_PATH_MAX_to_4096.diff.gz | patch -p1 --verbose || exit 1
-
-# Handle input.touchpad explicitly (needed due to kernel changes)
-zcat $CWD/patches/handle_input.touchpad_explicitly.diff.gz | patch -p1 --verbose || exit 1
-
-# Fix incorrect arguments to ioperm()
-zcat $CWD/patches/fix_ioperm_arguments.patch.gz | patch -p1 --verbose || exit 1
-
-# Fix segfaults from not calling dbus_error_init() early enough
-zcat $CWD/patches/fix_segfault-dbus_error_init.patch.gz | patch -p1 --verbose || exit 1
-
-# Ignore internal DM devices with new DM udev rules
-# https://bugzilla.redhat.com/show_bug.cgi?id=613909
-# http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=586286 
-zcat $CWD/patches/ignore_internal_dm_devices.diff.gz | patch -p1 --verbose || exit 1
-
-# Fix build with automake 1.11.1
-zcat $CWD/patches/fix-build-with-automake-1.11.1.patch | patch -p1 --verbose || exit 1
-
-# Fix segfault in hald/linux/device.c
-zcat $CWD/patches/fix-hal-segfault.patch | patch -p1 --verbose || exit 1
-
-autoconf
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --libexecdir=/usr/libexec \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --with-udev-prefix=/lib \
-  --disable-static \
-  --enable-docbook-docs \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --with-pid-file=/var/run/hald/pid \
-  --enable-parted \
-  --disable-policy-kit \
-  --enable-console-kit \
-  --disable-acl-management \
-  --enable-umount-helper \
-  --enable-sonypic \
-  --build=$ARCH-slackware-linux \
-  || exit 1
-# These were merged into the 2.6.22 kernels
-# --enable-acpi-ibm --enable-acpi-toshiba 
-# Use these instead of the corresponding --disable lines for PolicyKit support
-# --enable-policy-kit \
-# --enable-console-kit \
-# --enable-acl-management \
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
-
-# Install init script for hal
-mkdir -p $PKG/etc/rc.d
-zcat $CWD/rc.hald.gz > $PKG/etc/rc.d/rc.hald.new
-# Make HAL run by default:
-chmod 0755 $PKG/etc/rc.d/rc.hald.new
-
-# /* remove everything between the C-style comments if using PK
-# Make the HAL access controls suitable for us
-# Big thanks to Richard Hughes for feedback on this :-)
-# First, move the one installed by the system to the docs directory
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-mv $PKG/etc/dbus-1/system.d/hal.conf \
-  $PKG/usr/doc/$PKGNAM-$VERSION/hal.conf.orig
-# end removal */
-# Don't clobber an existing config file in case custom changes have been made
-zcat $CWD/hal.conf.gz > $PKG/etc/dbus-1/system.d/hal.conf.new
-
-# Install docs (directory was created above)
-cp -a \
-  AUTHORS COPYING* HACKING INSTALL NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
-( cd $PKG/usr/doc/$PKGNAM-$VERSION
-  ln -s ../../share/gtk-doc/html/libhal libhal
-  ln -s ../../share/gtk-doc/html/libhal-storage libhal-storage
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/l/hal/hal.conf b/source/l/hal/hal.conf
deleted file mode 100644
index 03c75353..00000000
--- a/source/l/hal/hal.conf
+++ /dev/null
@@ -1,69 +0,0 @@
-<!DOCTYPE busconfig PUBLIC
- "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-<busconfig>
-
-  <!-- Only root or user haldaemon can own the HAL service -->
-  <policy user="haldaemon">
-    <allow own="org.freedesktop.Hal"/>
-  </policy>
-  <policy user="root">
-    <allow own="org.freedesktop.Hal"/>
-  </policy>
-
-  <policy context="default">
-    <!-- Allow anyone to invoke methods on the Introspectable interface -->
-    <allow send_destination="org.freedesktop.Hal"
-           send_interface="org.freedesktop.DBus.Introspectable"/>
-    <!-- Allow anyone to invoke methods on the Properties interface -->
-    <allow send_destination="org.freedesktop.Hal"
-           send_interface="org.freedesktop.DBus.Properties" />
-    <!-- Allow anyone to invoke methods on the Manager interface -->
-    <allow send_destination="org.freedesktop.Hal"
-           send_interface="org.freedesktop.Hal.Manager"/>
-    <!-- Allow anyone to invoke methods on the Device interface -->
-    <allow send_destination="org.freedesktop.Hal"
-           send_interface="org.freedesktop.Hal.Device"/>
-  </policy>
-
-  <!-- Allow members of 'power' group to do power management stuff -->
-  <policy group="power">
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
-    <allow send_destination="org.freedesktop.Hal"
-           send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.LightSensor"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.DockStation"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.Leds"/>
-  </policy>
-
-  <!-- Allow members of 'plugdev' group to mount/unmount volumes -->
-  <policy group="plugdev">
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.Storage"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.Volume"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
-  </policy>
-
-  <!-- Allow members of netdev group to en/disable wake-on-lan in NICs
-       and to turn radios on and off -->
-  <policy group="netdev">
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
-    <allow send_destination="org.freedesktop.Hal"
-    	   send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>
-  </policy>
-
-</busconfig>
-
diff --git a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff b/source/l/hal/patches/10-keymap.fdi-restore_zap.diff
deleted file mode 100644
index 12e21ba7..00000000
--- a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff
+++ /dev/null
@@ -1,67 +0,0 @@
-We're going to make it clearer to users that they should NOT edit
-  this file (as installed to /usr/share/hal/fdi/... and also let
-  them know where to copy it and how to edit that copy for an
-  alternate keymap and such...   --rworkman @ 20091211
-
-diff -Nur hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi
---- hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi	2008-05-07 18:21:16.000000000 -0500
-+++ hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi	2009-07-21 00:06:11.779152226 -0500
-@@ -1,4 +1,8 @@
- <?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
-+
-+<!-- DO NOT EDIT THIS FILE - IT WILL BE OVERWRITTEN ON UPGRADES.
-+     SEE THE "READ THIS" NOTE BELOW FOR INSTRUCTIONS -->
-+
- <deviceinfo version="0.2">
-   <device>
-     <match key="info.capabilities" contains="input.keymap">
-@@ -6,18 +10,41 @@
-     </match>
- 
-     <match key="info.capabilities" contains="input.keys">
--      <merge key="input.xkb.rules" type="string">base</merge>
- 
--      <!-- If we're using Linux, we use evdev by default (falling back to
--           keyboard otherwise). -->
--      <merge key="input.xkb.model" type="string">keyboard</merge>
--      <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
--             string="Linux">
--        <merge key="input.xkb.model" type="string">evdev</merge>
--      </match>
-+      <!-- Restore Ctrl-Alt-Bksp Xserver Zapping -->
-+      <merge key="input.xkb.options" type="string">terminate:ctrl_alt_bksp</merge>
- 
-+      <!-- Edit (as needed) these four lines in the copied fdi file -->
-+      <merge key="input.xkb.rules" type="string">base</merge>
-+      <merge key="input.xkb.model" type="string">evdev</merge>
-       <merge key="input.xkb.layout" type="string">us</merge>
-       <merge key="input.xkb.variant" type="string" />
-+
-     </match>
-   </device>
- </deviceinfo>
-+
-+<!-- READ THIS FOR CUSTOM KEYBOARD INFORMATION
-+
-+  If you want to add a custom model/layout/variant to X, you will need to COPY
-+  this file to /etc/hal/fdi/policy/ and edit that copy.  After editing it to
-+  suit, you will need to leave X, restart the HAL daemon, and start X again.
-+
-+  Here's an example of the four lines from above:
-+      <merge key="input.xkb.rules" type="string">base</merge>
-+      <merge key="input.xkb.model" type="string">evdev</merge>
-+      <merge key="input.xkb.layout" type="string">us</merge>
-+      <merge key="input.xkb.variant" type="string">intl</merge>
-+
-+  Many desktop environments, including KDE and Xfce, have their own methods to
-+  configure keyboard layouts and such if you'd like to use them.
-+
-+  If you prefer to use the "old" way of configuring keyboards (without HAL's
-+  input device hotplugging), then you'll need to add the following lines to
-+  the ServerFlags section of /etc/X11/xorg.conf:
-+    Option   "AllowEmptyInput"     "false"
-+    Option   "AutoAddDevices"      "false"
-+    Option   "AutoEnableDevices"   "false"
-+  You can now edit the Keyboard section of xorg.conf as usual.
-+-->
-+
diff --git a/source/l/hal/patches/fix-build-with-automake-1.11.1.patch b/source/l/hal/patches/fix-build-with-automake-1.11.1.patch
deleted file mode 100644
index 13d1817c..00000000
--- a/source/l/hal/patches/fix-build-with-automake-1.11.1.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From ce8422fc8ec4881c5e54b651af3ef4ce2ca96847 Mon Sep 17 00:00:00 2001
-From: Bernhard Rosenkraenzer <bero@arklinux.org>
-Date: Mon, 23 Aug 2010 14:50:40 +0200
-Subject: [PATCH] fix build with automake 1.11.1
-
-Fixed build with automake 1.11.1: whitespace following trailing backslash.
-fd.o#29085
----
- policy/Makefile.am |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/policy/Makefile.am b/policy/Makefile.am
-index b506a08..503e9f3 100644
---- a/policy/Makefile.am
-+++ b/policy/Makefile.am
-@@ -24,7 +24,7 @@ check:
- 	      then \
-                 echo ok; \
-             else \
--                echo failed; \ 
-+                echo failed; \
- 		exit 1; \
-             fi; \
-         done;
--- 
-1.7.3.2
-
diff --git a/source/l/hal/patches/fix-hal-segfault.patch b/source/l/hal/patches/fix-hal-segfault.patch
deleted file mode 100644
index 4e409e31..00000000
--- a/source/l/hal/patches/fix-hal-segfault.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From fc9571c07a81aba8a8fdaa8014d4034b6456d203 Mon Sep 17 00:00:00 2001
-From: Michael Schroeder <mls@novell.com>
-Date: Mon, 23 Aug 2010 16:13:13 +0200
-Subject: [PATCH] fix hal segfault
-
-Fixed hal segfault. It crashes because strlen() gets called with a
-NULL pointer (ppdev_compute_udi calls hal_util_get_last_element
-with a NULL pointer).
-
-bnc#556485
----
- hald/linux/device.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/hald/linux/device.c b/hald/linux/device.c
-index 8570d46..401dc44 100644
---- a/hald/linux/device.c
-+++ b/hald/linux/device.c
-@@ -2287,9 +2287,10 @@ ppdev_compute_udi (HalDevice *d)
- 	gchar udi[256];
- 	const char *name;
- 
--	name = hal_util_get_last_element( hal_device_property_get_string(d, "linux.device_file"));
-+	name = hal_device_property_get_string (d, "linux.device_file");
- 
- 	if (name) {
-+		name = hal_util_get_last_element (name);
- 		hald_compute_udi (udi, sizeof (udi), "/org/freedesktop/Hal/devices/ppdev_%s", name);
- 	} else {
- 		hald_compute_udi (udi, sizeof (udi), "/org/freedesktop/Hal/devices/ppdev");
--- 
-1.7.3.2
-
diff --git a/source/l/hal/patches/fix_ioperm_arguments.patch b/source/l/hal/patches/fix_ioperm_arguments.patch
deleted file mode 100644
index 833e0756..00000000
--- a/source/l/hal/patches/fix_ioperm_arguments.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-commit 597c1ffffd61a15a334ce42f2a569c59f0270bcb
-Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-Date:   Thu Feb 25 02:25:18 2010 -0800
-
-    Fix incorrect arguments to ioperm() call
-    
-    The second argument of ioperm() is not the last port to be accessed
-    but rather length of the port range [port, port + len).
-    
-    Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-diff --git a/hald/linux/addons/addon-imac-backlight.c b/hald/linux/addons/addon-imac-backlight.c
-index e869192..54e4ea3 100644
---- a/hald/linux/addons/addon-imac-backlight.c
-+++ b/hald/linux/addons/addon-imac-backlight.c
-@@ -158,7 +158,8 @@ main (int argc, char **argv)
- 		goto out;
- 	}
- 
--	if (ioperm(0xB2, 0xB3, 1) < 0)
-+	/* Allow access to ports 0xB2 and 0xB3 */
-+	if (ioperm(0xB2, 2, 1) < 0)
- 	{
- 		HAL_ERROR (("ioperm failed (you should be root)."));
- 		exit(1);
-diff --git a/hald/linux/addons/addon-macbookpro-backlight.c b/hald/linux/addons/addon-macbookpro-backlight.c
-index 2a6fef6..c1bbbac 100644
---- a/hald/linux/addons/addon-macbookpro-backlight.c
-+++ b/hald/linux/addons/addon-macbookpro-backlight.c
-@@ -507,7 +507,8 @@ main (int argc, char *argv[])
-  	state = INREG(0x7ae4);
-  	OUTREG(0x7ae4, state);
- 
--	if (ioperm (0x300, 0x304, 1) < 0) {
-+	/* Allow access to porta 0x300 through 0x304 */
-+	if (ioperm (0x300, 5, 1) < 0) {
- 		HAL_ERROR (("ioperm failed (you should be root)."));
- 		exit(1);
- 	}
diff --git a/source/l/hal/patches/fix_libusb_detection.diff b/source/l/hal/patches/fix_libusb_detection.diff
deleted file mode 100644
index 8a4637d4..00000000
--- a/source/l/hal/patches/fix_libusb_detection.diff
+++ /dev/null
@@ -1,65 +0,0 @@
-commit fce91df8ba7f305c624baf1f06961c040b088ecc
-Author: Joe Marcus Clarke <marcus@FreeBSD.org>
-Date:   Mon Dec 7 19:05:27 2009 -0500
-
-    Fix libusb detection on Linux
-    
-    Adjust the FreeBSD libusb20 code so that it does not interfere with the
-    Linux libusb detection.
-    
-    Reported by:        Robby Workman <rw@rlworkman.net>
-
-diff --git a/configure.in b/configure.in
-index a8fda51..8363595 100644
---- a/configure.in
-+++ b/configure.in
-@@ -479,9 +479,6 @@ if test "x$with_libpci" != xno ; then
- fi 
- AM_CONDITIONAL([HAVE_LIBPCI], [test "x$USE_LIBPCI" = "xyes"])
- 
--USE_LIBUSB20=no
--USE_LIBUSB=no
--LIBUSB20_LIBS=""
- AC_ARG_WITH([backend],
- 	    AS_HELP_STRING([--with-backend=<name>],
- 	                   [backend to use (linux/solaris/freebsd/dummy)]),
-@@ -510,21 +507,25 @@ AM_CONDITIONAL(HALD_COMPILE_FREEBSD, [test x$HALD_BACKEND = xfreebsd], [Compilin
- AM_CONDITIONAL(HALD_COMPILE_SOLARIS, [test x$HALD_BACKEND = xsolaris], [Compiling for Solaris])
- AC_SUBST(HALD_BACKEND)
- if test "x$HALD_BACKEND" = "xfreebsd"; then
--    AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_LIBUSB20=yes], [USE_LIBUSB20=no])
--fi
--if test "x$USE_LIBUSB20" = "xno"; then
--    AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_LIBUSB=yes], [USE_LIBUSB=no])
--fi
--AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB20" = "xyes"])
--AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB" = "xyes"])
--if test "x$USE_LIBUSB20" = "xyes"; then
--    AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20])
--    LIBUSB20_LIBS="-lusb20"
--elif test "x$USE_LIBUSB" = "xyes"; then
--    AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20])
--    LIBUSB20_LIBS="-lusb"
-+    USE_BSDLIBUSB20=no
-+    USE_BSDLIBUSB=no
-+    LIBUSB20_LIBS=""
-+    AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_BSDLIBUSB20=yes], [USE_BSDLIBUSB20=no])
-+    if test "x$USE_BSDLIBUSB20" = "xno"; then
-+        AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_BSDLIBUSB=yes], [USE_BSDLIBUSB=no])
-+    fi
-+    AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_BSDLIBUSB20" = "xyes" -o "x$USE_BSDLIBUSB" = "xyes"])
-+    if test "x$USE_BSDLIBUSB20" = "xyes"; then
-+        AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20])
-+        LIBUSB20_LIBS="-lusb20"
-+    elif test "x$USE_BSDLIBUSB" = "xyes"; then
-+        AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20])
-+        LIBUSB20_LIBS="-lusb"
-+    fi
-+    AC_SUBST(LIBUSB20_LIBS)
-+else
-+    AM_CONDITIONAL([HAVE_LIBUSB20], [false])
- fi
--AC_SUBST(LIBUSB20_LIBS)
- 
- dnl DBUS API is subject to changes
- AC_DEFINE_UNQUOTED(DBUS_API_SUBJECT_TO_CHANGE, [], [DBUS API is subject to change])
diff --git a/source/l/hal/patches/fix_segfault-dbus_error_init.patch b/source/l/hal/patches/fix_segfault-dbus_error_init.patch
deleted file mode 100644
index f01eefca..00000000
--- a/source/l/hal/patches/fix_segfault-dbus_error_init.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-commit baa61a879985d63f549854518ef14efd40e62e8c
-Author: Peter Jones <pjones@redhat.com>
-Date:   Wed Feb 24 11:19:28 2010 -0500
-
-    Make sure dbus_error_init() is called before LIBHAL_FREE_DBUS_ERROR()
-    
-    If dbus_error_init() is not called before LIBHAL_FREE_DBUS_ERROR() is
-    called on that error, then it is uninitialized and may segfault.  This
-    means that dbus_error_init() must be called before any "goto out" if
-    "out:" calls LIBHAL_FREE_DBUS_ERROR().
-    
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-diff --git a/hald/linux/probing/probe-hiddev.c b/hald/linux/probing/probe-hiddev.c
-index 45d2084..bffc040 100644
---- a/hald/linux/probing/probe-hiddev.c
-+++ b/hald/linux/probing/probe-hiddev.c
-@@ -57,11 +57,12 @@ main (int argc, char *argv[])
- 	/* assume failure */
- 	ret = 1;
- 
-+	dbus_error_init (&error);
-+
- 	udi = getenv ("UDI");
- 	if (udi == NULL)
- 		goto out;
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL)
- 		goto out;
- 
-diff --git a/hald/linux/probing/probe-ieee1394-unit.c b/hald/linux/probing/probe-ieee1394-unit.c
-index 70b0f86..aaa92e2 100644
---- a/hald/linux/probing/probe-ieee1394-unit.c
-+++ b/hald/linux/probing/probe-ieee1394-unit.c
-@@ -388,6 +388,8 @@ int main (int argc, char *argv[])
- 
- 	setup_logger ();
- 
-+	dbus_error_init (&error);
-+
- 	udi = getenv ("UDI");
- 	if (udi == NULL)
- 		goto out;
-@@ -396,7 +398,6 @@ int main (int argc, char *argv[])
- 	if (ieee1394_udi == NULL)
- 		goto out;
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL)
- 		goto out;
- 
-diff --git a/hald/linux/probing/probe-net-bluetooth.c b/hald/linux/probing/probe-net-bluetooth.c
-index 0b1b912..e911eea 100644
---- a/hald/linux/probing/probe-net-bluetooth.c
-+++ b/hald/linux/probing/probe-net-bluetooth.c
-@@ -141,6 +141,8 @@ main (int argc, char *argv[])
- 	DBusMessage *reply = NULL;
- 	DBusError error;
- 
-+	dbus_error_init (&error);
-+
- 	udi = getenv ("UDI");
- 	if (udi == NULL)
- 		goto out;
-@@ -151,8 +153,6 @@ main (int argc, char *argv[])
- 
- 	HAL_INFO (("Investigating '%s'", iface));
- 
--	dbus_error_init (&error);
--
- 	if ((conn = dbus_bus_get (DBUS_BUS_SYSTEM, &error)) == NULL)
- 		goto out;
- 
-diff --git a/hald/linux/probing/probe-printer.c b/hald/linux/probing/probe-printer.c
-index 91ed7bc..7c6d1c6 100644
---- a/hald/linux/probing/probe-printer.c
-+++ b/hald/linux/probing/probe-printer.c
-@@ -66,6 +66,8 @@ main (int argc, char *argv[])
- 	ret = 1;
- 
- 	setup_logger ();
-+
-+	dbus_error_init (&error);
- 	
- 	udi = getenv ("UDI");
- 	if (udi == NULL) {
-@@ -73,7 +75,6 @@ main (int argc, char *argv[])
- 		goto out;
- 	}
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL) {
- 		HAL_ERROR (("ctx init failed"));
- 		goto out;
-diff --git a/hald/linux/probing/probe-smbios.c b/hald/linux/probing/probe-smbios.c
-index 0bc9689..15c0d4f 100644
---- a/hald/linux/probing/probe-smbios.c
-+++ b/hald/linux/probing/probe-smbios.c
-@@ -129,6 +129,8 @@ main (int argc, char *argv[])
- 	ret = 1;
- 
- 	setup_logger ();
-+
-+	dbus_error_init (&error);
- 	
- 	udi = getenv ("UDI");
- 	if (udi == NULL) {
-@@ -136,7 +138,6 @@ main (int argc, char *argv[])
- 		goto out;
- 	}
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL) {
- 		HAL_ERROR (("ctx init failed"));
- 		goto out;
-diff --git a/hald/linux/probing/probe-storage.c b/hald/linux/probing/probe-storage.c
-index 824a82e..dd524ca 100644
---- a/hald/linux/probing/probe-storage.c
-+++ b/hald/linux/probing/probe-storage.c
-@@ -109,6 +109,8 @@ main (int argc, char *argv[])
- 	/* assume failure */
- 	ret = 1;
- 
-+	dbus_error_init (&error);
-+
- 	if ((udi = getenv ("UDI")) == NULL)
- 		goto out;
- 	if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL)
-@@ -127,7 +129,6 @@ main (int argc, char *argv[])
- 	else
- 		only_check_for_fs = FALSE;
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL)
- 		goto out;
- 
-diff --git a/hald/linux/probing/probe-video4linux.c b/hald/linux/probing/probe-video4linux.c
-index cf913c0..7bc13e8 100644
---- a/hald/linux/probing/probe-video4linux.c
-+++ b/hald/linux/probing/probe-video4linux.c
-@@ -58,6 +58,8 @@ main (int argc, char *argv[])
- 
- 	setup_logger ();
- 
-+	dbus_error_init (&error);
-+
- 	device_file = getenv ("HAL_PROP_VIDEO4LINUX_DEVICE");
- 	if (device_file == NULL)
- 		goto out;
-@@ -66,7 +68,6 @@ main (int argc, char *argv[])
- 	if (udi == NULL)
- 		goto out;
- 
--	dbus_error_init (&error);
- 	ctx = libhal_ctx_init_direct (&error);
- 	if (ctx == NULL)
- 		goto out;
-diff --git a/hald/linux/probing/probe-volume.c b/hald/linux/probing/probe-volume.c
-index 0de1b91..7268fff 100644
---- a/hald/linux/probing/probe-volume.c
-+++ b/hald/linux/probing/probe-volume.c
-@@ -318,6 +318,8 @@ main (int argc, char *argv[])
- 	/* assume failure */
- 	ret = 1;
- 
-+	dbus_error_init (&error);
-+
- 	if ((udi = getenv ("UDI")) == NULL)
- 		goto out;
- 	if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL)
-@@ -346,7 +348,6 @@ main (int argc, char *argv[])
- 
- 	fsusage = getenv ("HAL_PROP_VOLUME_FSUSAGE");
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL)
- 		goto out;
- 
diff --git a/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff b/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff
deleted file mode 100644
index b5bfdec6..00000000
--- a/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff
+++ /dev/null
@@ -1,51 +0,0 @@
-commit dcb2829b8eff61463b0869614ddb07b1c86cecaa
-Author: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
-Date:   Wed Dec 30 12:42:52 2009 +0100
-
-    linux/probe-input: don't use error prio init
-    
-    it may happen in the out: case that LIBHAL_FREE_DBUS_ERROR (&error) is
-    called before the error structure is initialized via
-    dbus_error_init (&error). This could lead to a segfault during startup
-    as seen in dmesg:
-    
-    |Intel AES-NI instructions are not detected.
-    |padlock: VIA PadLock not detected.
-    |hald-probe-inpu[1793]: segfault at 2 ip 00007f656fb68969 sp 00007fff39eeb950 error 4 in libc-2.10.2.so[7f656faf3000+14a000]
-    |hald-probe-inpu[1796]: segfault at 2 ip 00007fa2c3293969 sp 00007fffd92a5dd0 error 4 in libc-2.10.2.so[7fa2c321e000+14a000]
-    |hald-probe-inpu[1797]: segfault at 2 ip 00007f1d08ba2969 sp 00007fff34244e30 error 4 in libc-2.10.2.so[7f1d08b2d000+14a000]
-    |hald-probe-inpu[1799]: segfault at 2 ip 00007f35c0e3d969 sp 00007fffe5ec7ee0 error 4 in libc-2.10.2.so[7f35c0dc8000+14a000]
-    |hald-probe-inpu[1800]: segfault at 2 ip 00007f931c556969 sp 00007fffe1825b60 error 4 in libc-2.10.2.so[7f931c4e1000+14a000]
-    |hald-probe-inpu[1801]: segfault at 2 ip 00007f5156d9a969 sp 00007fff4e620af0 error 4 in libc-2.10.2.so[7f5156d25000+14a000]
-    |RPC: Registered udp transport module.
-    |RPC: Registered tcp transport module.
-    
-    What I run into seems to be reported as Debian #562068 [0]. This patch
-    makes the segfault go away on my machine.
-    
-    [0] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068
-    
-    Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-
-diff --git a/hald/linux/probing/probe-input.c b/hald/linux/probing/probe-input.c
-index 94e9929..cad47d3 100644
---- a/hald/linux/probing/probe-input.c
-+++ b/hald/linux/probing/probe-input.c
-@@ -70,6 +70,7 @@ main (int argc, char *argv[])
- 	fd = -1;
- 
- 	setup_logger ();
-+	dbus_error_init (&error);
- 
- 	button_type = getenv ("HAL_PROP_BUTTON_TYPE");
- 	if (button_type == NULL)
-@@ -96,7 +97,6 @@ main (int argc, char *argv[])
- 	if (udi == NULL)
- 		goto out;
- 
--	dbus_error_init (&error);
- 	if ((ctx = libhal_ctx_init_direct (&error)) == NULL)
- 		goto out;
- 
diff --git a/source/l/hal/patches/handle_input.touchpad_explicitly.diff b/source/l/hal/patches/handle_input.touchpad_explicitly.diff
deleted file mode 100644
index b1231d6d..00000000
--- a/source/l/hal/patches/handle_input.touchpad_explicitly.diff
+++ /dev/null
@@ -1,75 +0,0 @@
-commit 6dccf8e3ad181e8f56b1d2a994ec50a1953a1c2d
-Author: Michael Witten <mfwitten@gmail.com>
-Date:   Tue Jan 5 18:53:17 2010 -0600
-
-    Policy: handle `input.touchpad' explicitly
-    
-    This commit essentially duplicates the policy for:
-    
-       <match key="info.capabilities" contains="input.mouse">
-    
-    and then changes `input.mouse' to `input.touchpad'. This
-    is necessary because in Linus Torvalds's Linux repo:
-    
-        git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
-    
-    the following commit:
-    
-        commit 7105d2ea73e1391b681d0e1212c42f561c64d429
-        Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-        Date:   Fri Dec 11 23:54:54 2009 -0800
-    
-            Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad
-    
-            Relative events are only reported via secondary device therefore device
-            associated with the touchpad should not advertise these capabilities.
-    
-            Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-    
-    so that HAL no longer adds:
-    
-        input.mouse
-    
-    to an ALPS touchpad's:
-    
-        info.capabilities
-    
-    so that HAL no longer marks the ALPS touchpad with:
-    
-        input.x11_driver = 'evdev'
-    
-    because the policy file:
-    
-        fdi/policy/10osvendor/10-x11-input.fdi
-    
-    doesn't define the policy for:
-    
-        <match key="info.capabilities" contains="input.touchpad">
-    
-    which was previous unnecessary because everything used to
-    be caught by the policy for:
-    
-        <match key="info.capabilities" contains="input.mouse">
-    
-    Signed-off-by: Michael Witten <mfwitten@gmail.com>
-    Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
-
-diff --git a/fdi/policy/10osvendor/10-x11-input.fdi b/fdi/policy/10osvendor/10-x11-input.fdi
-index cff8fc5..8bbe263 100644
---- a/fdi/policy/10osvendor/10-x11-input.fdi
-+++ b/fdi/policy/10osvendor/10-x11-input.fdi
-@@ -16,6 +16,14 @@
-       </match>
-     </match>
- 
-+    <match key="info.capabilities" contains="input.touchpad">
-+      <merge key="input.x11_driver" type="string">mouse</merge>
-+      <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
-+             string="Linux">
-+        <merge key="input.x11_driver" type="string">evdev</merge>
-+      </match>
-+    </match>
-+
-     <match key="info.capabilities" contains="input.tablet">
-       <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
-              string="Linux">
diff --git a/source/l/hal/patches/ignore_internal_dm_devices.diff b/source/l/hal/patches/ignore_internal_dm_devices.diff
deleted file mode 100644
index 735a45f3..00000000
--- a/source/l/hal/patches/ignore_internal_dm_devices.diff
+++ /dev/null
@@ -1,47 +0,0 @@
-From 6f16321da13f6a7cbd9c424ddba2e727e434fa25 Mon Sep 17 00:00:00 2001
-From: Milan Broz <mbroz@redhat.com>
-Date: Tue, 13 Jul 2010 16:07:32 +0200
-Subject: [PATCH] HAL: Ignore internal DM devices with new DM udev rules
-
-With new device-mapper udev rules are /dev/mapper/* symlinks
-to basic device name /dev/dm-X.
-(Change requested by udev upstream.)
-
-This change breaks temporary-cryptsetup workaround inside hal.
-
-With new dm-udev rules (uncluded since device-mapper 1.02.39)
-there is DM_UDEV_DISABLE_OTHER_RULES_FLAG variable
-which controls that scan should be ignored for this device
-(it is set for all internal devices, including temporary cryptsetup,
-internal parts of lvm devices etc.)
-
-Ignore device if this flag is set.
-
-See bugs
-https://bugzilla.redhat.com/show_bug.cgi?id=613909
-http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=586286
-
-Signed-off-by: Milan Broz <mbroz@redhat.com>
----
- hald/linux/osspec.c |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
-diff --git a/hald/linux/osspec.c b/hald/linux/osspec.c
-index a8233fd..6d616bc 100644
---- a/hald/linux/osspec.c
-+++ b/hald/linux/osspec.c
-@@ -215,6 +215,11 @@ hald_udev_data (GIOChannel *source, GIOCondition condition, gpointer user_data)
- 				g_free (str);
- 			}
- 			g_free (dstr);
-+		} else if (strncmp(key, "DM_UDEV_DISABLE_OTHER_RULES_FLAG=", 33) == 0) {
-+			if (strtoul(&key[33], NULL, 10) == 1) {
-+				HAL_INFO (("ignoring device requested by DM udev rules"));
-+				goto invalid;
-+			}
- 		}
- 	}
- 
--- 
-1.7.3.2
-
diff --git a/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff b/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff
deleted file mode 100644
index b4c770ae..00000000
--- a/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff
+++ /dev/null
@@ -1,30 +0,0 @@
-commit a2c3dd5a04d79265772c09c4280606d5c2ed72c6
-Author: Martin Pitt <martin.pitt@ubuntu.com>
-Date:   Mon Jan 4 16:56:13 2010 +0100
-
-    Bump HAL_PATH_MAX to 4096
-    
-    Some bits in the code use realpath() with destination paths of size
-    HAL_PATH_MAX. This potentially breaks on systems where PATH_MAX is bigger than
-    HAL_PATH_MAX (which was 512 until now).
-    
-    Since we can't use PATH_MAX directly (due to platforms like GNU/Hurd, which
-    apparently don't have it), just bump HAL_PATH_MAX to 4096 (as PATH_MAX is on
-    Linux), to avoid potential buffer overflows and also fix hal on Linux when
-    enabling FORTIFY in gcc.
-    
-    https://bugs.freedesktop.org/show_bug.cgi?id=25888
-
-diff --git a/hald/util.h b/hald/util.h
-index c2a1584..7883333 100644
---- a/hald/util.h
-+++ b/hald/util.h
-@@ -38,7 +38,7 @@
- #endif
- 
- #define HAL_NAME_MAX 256
--#define HAL_PATH_MAX 512
-+#define HAL_PATH_MAX 4096
- 
- gboolean hal_util_remove_trailing_slash (gchar *path);
- 
diff --git a/source/l/hal/rc.hald b/source/l/hal/rc.hald
deleted file mode 100644
index 7516de2b..00000000
--- a/source/l/hal/rc.hald
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the hal daemon:
-
-PIDFILE=/var/run/hald/pid
-
-hal_start() {
-  if [ -x /usr/sbin/hald ]; then
-    if ! ps axc | grep -q dbus-daemon ; then
-      if [ -r /etc/rc.d/rc.messagebus ]; then
-        sh /etc/rc.d/rc.messagebus start
-        sleep 1
-      else
-        echo "FATAL:  Can't start HAL daemon without dbus package."
-        sleep 5
-        exit 1
-      fi
-    fi
-    echo "Starting HAL daemon:  /usr/sbin/hald --daemon=yes"
-    /usr/sbin/hald --daemon=yes
-  fi
-}
-
-hal_stop() {
-  if [ -e "$PIDFILE" ]; then
-    kill $(cat $PIDFILE)
-    rm -f $PIDFILE
-  fi
-  # Just in case:
-  killall hald 1> /dev/null 2> /dev/null
-}
-
-# See how we were called.
-case "$1" in
-    start)
-        hal_start
-        ;;
-    stop)
-        hal_stop
-        ;;
-    restart)
-        hal_stop
-	sleep 1
-        hal_start
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|restart}"
-        ;;
-esac
-
diff --git a/source/l/hal/slack-desc b/source/l/hal/slack-desc
deleted file mode 100644
index 0145a5df..00000000
--- a/source/l/hal/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-   |-----handy-ruler------------------------------------------------------|
-hal: hal (The HAL Hardware Abstraction Layer)
-hal:
-hal: HAL is a piece of software that provides a view of the various
-hal: hardware attached to a system.  HAL keeps detailed metadata for each
-hal: piece of hardware and provides hooks so that system and desktop
-hal: software can react to changes in the hardware configuration (such as
-hal: the insertion of a DVD, or a USB flash memory stick).
-hal:
-hal: For more info, see:  http://hal.freedesktop.org/
-hal:
-hal:
diff --git a/source/l/herqq/herqq.SlackBuild b/source/l/herqq/herqq.SlackBuild
new file mode 100755
index 00000000..b55d06e9
--- /dev/null
+++ b/source/l/herqq/herqq.SlackBuild
@@ -0,0 +1,98 @@
+#!/bin/sh 
+
+# Copyright 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2011  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=herqq
+VERSION=${VERSION:-$(echo $PKGNAM-*.zip | rev | cut -f 2- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+unzip $CWD/$PKGNAM-$VERSION.zip || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+# Fix 64-bit installation path:
+sed -i -e "s#PREFIX/lib#&${LIBDIRSUFFIX}#" $(find . -name "*.pro")
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+qmake PREFIX=/usr
+make $NUMJOBS || make || exit 1
+make install INSTALL_ROOT=$PKG || exit 1
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  hupnp/ChangeLog hupnp/LICENSE_LGPLv3.txt \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/herqq/slack-desc b/source/l/herqq/slack-desc
new file mode 100644
index 00000000..1b580c37
--- /dev/null
+++ b/source/l/herqq/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler-----------------------------------------------------|
+herqq: herqq (UPnP library)
+herqq:
+herqq: Herqq UPnP (HUPnP) is a software library for building UPnP devices
+herqq: and control points conforming to the UPnP Device Architecture
+herqq: version 1.1.  It is designed to be simple to use and robust in
+herqq: operation.  It is built using C++ and the Qt Framework.
+herqq:
+herqq: Homepage:  http://www.herqq.org/
+herqq:
+herqq:
+herqq:
diff --git a/source/l/hicolor-icon-theme/doinst.sh b/source/l/hicolor-icon-theme/doinst.sh
index 46e76c00..5d59cebb 100644
--- a/source/l/hicolor-icon-theme/doinst.sh
+++ b/source/l/hicolor-icon-theme/doinst.sh
@@ -19,7 +19,9 @@ rm -f usr/share/icons/icon-theme.cache
 
 # Update hicolor theme cache:
 if [ -d usr/share/icons/hicolor ]; then
-  if [ -x /usr/bin/gtk-update-icon-cache ]; then
-    chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+  if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then # ONLY run this if there's already a cache!!!
+    if [ -x /usr/bin/gtk-update-icon-cache ]; then
+      chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+    fi
   fi
 fi
diff --git a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild
index 0a5aecaa..9bb51486 100755
--- a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild
+++ b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild
@@ -23,7 +23,7 @@
 
 VERSION=${VERSION:-0.12}
 ARCH=noarch
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
diff --git a/source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache b/source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache
index a1b220b7..dfad89c9 100644
--- a/source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache
+++ b/source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache
@@ -7,8 +7,10 @@
 
 # Update hicolor theme cache:
 if [ -d usr/share/icons/hicolor ]; then
-  if [ -x /usr/bin/gtk-update-icon-cache ]; then
-    chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+  if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then # ONLY run this is there's already a cache!!!
+    if [ -x /usr/bin/gtk-update-icon-cache ]; then
+      chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+    fi
   fi
 fi
 
diff --git a/source/l/hunspell/hunspell.SlackBuild b/source/l/hunspell/hunspell.SlackBuild
index 78ca6fef..93bb2895 100755
--- a/source/l/hunspell/hunspell.SlackBuild
+++ b/source/l/hunspell/hunspell.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 
 PKGNAM=hunspell
-VERSION=${VERSION:-1.2.9}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -35,12 +35,14 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -53,11 +55,19 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
@@ -83,7 +93,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --disable-static \
   --with-ui \
   --with-readline \
-  --build=$ARCH-slackware-linux \
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/hunspell/slack-desc b/source/l/hunspell/slack-desc
index b3a4761b..eb8f2440 100644
--- a/source/l/hunspell/slack-desc
+++ b/source/l/hunspell/slack-desc
@@ -11,9 +11,9 @@ hunspell:
 hunspell: Hunspell is a spell checker and morphological analyzer library
 hunspell: and program designed for languages with rich morphology
 hunspell: and complex word compounding or character encoding.
-hunspell: Hunspell interfaces: Ispell-like terminal interface using Curses
-hunspell: library, Ispell pipe interface, OpenOffice.org UNO module.
-hunspell:
+hunspell: Hunspell interfaces: Ispell-like terminal interface using ncurses
+hunspell: library, Ispell pipe interface, and OpenOffice.org UNO module.
 hunspell:
 hunspell: Home page: http://hunspell.sourceforge.net/
 hunspell:
+hunspell:
diff --git a/source/l/icon-naming-utils/slack-desc b/source/l/icon-naming-utils/slack-desc
index c4fb3cb2..5c516159 100644
--- a/source/l/icon-naming-utils/slack-desc
+++ b/source/l/icon-naming-utils/slack-desc
@@ -5,12 +5,12 @@
 # make exactly 11 lines for the formatting to be correct. It's also
 # customary to leave one space after the ':'.
 
-                 |-----handy-ruler------------------------------------------|
+                 |-----handy-ruler------------------------------------------------------|
 icon-naming-utils: icon-naming-utils (generate icon files for your DE)
 icon-naming-utils:
-icon-naming-utils: It is a script for maintaining backwards compatibility 
-icon-naming-utils: with current desktop icon themes, while migrating to 
-icon-naming-utils: the names specified in the Icon Naming Specification.
+icon-naming-utils: It is a script for maintaining backwards compatibility with current
+icon-naming-utils: desktop icon themes, while migrating to the names specified in the
+icon-naming-utils: Icon Naming Specification.
 icon-naming-utils:
 icon-naming-utils: Homepage: http://tango.freedesktop.org
 icon-naming-utils:
diff --git a/source/l/icu4c/icu4c.SlackBuild b/source/l/icu4c/icu4c.SlackBuild
new file mode 100755
index 00000000..215e9510
--- /dev/null
+++ b/source/l/icu4c/icu4c.SlackBuild
@@ -0,0 +1,104 @@
+#!/bin/sh
+
+# Slackware build script for icu4c
+
+# Copyright 2007-2012 Heinz Wiesinger, Amsterdam, The Netherlands
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=icu4c
+SRCVER=${SRCVER:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 2- -d . | cut -f 2 -d - | rev)}
+VERSION=$(echo $SRCVER | tr _ .)
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-icu4c
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf icu
+tar xvf $CWD/icu4c-$SRCVER-src.tar.xz || exit 1
+cd icu || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 \
+  -o -perm 400 \) -exec chmod 644 {} \;
+
+cd source/
+  CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+    --prefix=/usr \
+    --libdir=/usr/lib${LIBDIRSUFFIX} \
+    --mandir=/usr/man \
+    --enable-shared \
+    --disable-static \
+    --sysconfdir=/etc \
+    --localstatedir=/var \
+    --build=$ARCH-slackware-linux || exit 1
+
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+
+mkdir -p $PKG/usr/doc/icu4c-$VERSION
+cp -a \
+  license.html readme.html unicode-license.txt $PKG/usr/doc/icu4c-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/icu4c-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/icu4c/slack-desc b/source/l/icu4c/slack-desc
new file mode 100644
index 00000000..2d0beefd
--- /dev/null
+++ b/source/l/icu4c/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+icu4c: icu4c (International Components for Unicode)
+icu4c:
+icu4c: The International Components for Unicode (ICU) libraries provide
+icu4c: robust and full-featured Unicode services on a wide variety of
+icu4c: platforms.
+icu4c:
+icu4c: Homepage: http://www.icu-project.org/
+icu4c:
+icu4c:
+icu4c:
+icu4c:
diff --git a/source/l/ilmbase/slack-desc b/source/l/ilmbase/slack-desc
index 4d593112..ca56c31a 100644
--- a/source/l/ilmbase/slack-desc
+++ b/source/l/ilmbase/slack-desc
@@ -12,7 +12,7 @@ ilmbase: ilmbase currently includes:
 ilmbase:
 ilmbase: IlmThread - a thread abstraction library
 ilmbase: Imath - a math function library
-ilmbase: Iex - an excpetion-handling library
+ilmbase: Iex - an exception-handling library
 ilmbase: Half - Ilm's 16 bit floating point format library
 ilmbase:
 ilmbase: Homepage:  http://www.openexr.org/
diff --git a/source/l/jasper/slack-desc b/source/l/jasper/slack-desc
index a489f75e..c79751af 100644
--- a/source/l/jasper/slack-desc
+++ b/source/l/jasper/slack-desc
@@ -12,7 +12,8 @@ jasper: The JasPer Project is an open-source initiative to provide a free
 jasper: software-based reference implementation of the codec specified in the
 jasper: JPEG-2000 Part-1 standard (i.e., ISO/IEC 15444-1).jasper:
 jasper:
+jasper: jasper home: http://www.ece.uvic.ca/~mdadams/jasper/
+jasper:
 jasper:
 jasper:
-jasper: jasper home: http://www.ece.uvic.ca/~mdadams/jasper/
 jasper:
diff --git a/source/l/jre b/source/l/jre
deleted file mode 120000
index 275d98ff..00000000
--- a/source/l/jre
+++ /dev/null
@@ -1 +0,0 @@
-../local/jre
\ No newline at end of file
diff --git a/source/l/js185/js185-destdir.patch b/source/l/js185/js185-destdir.patch
new file mode 100644
index 00000000..87b7b53b
--- /dev/null
+++ b/source/l/js185/js185-destdir.patch
@@ -0,0 +1,15 @@
+#https://bugzilla.mozilla.org/show_bug.cgi?id=628723
+
+--- Makefile.in.old	2011-04-10 04:21:19.918608008 -0700
++++ Makefile.in	2011-04-10 04:21:58.088607992 -0700
+@@ -888,8 +888,8 @@
+ ifeq (,$(HOST_BIN_SUFFIX))
+ 	mv -f $(SHLIB_ANY_VER) $(SHLIB_EXACT_VER)
+ 	@[ ! -h $(SHLIB_ABI_VER) ] || rm -f $(SHLIB_ABI_VER)
+-	ln -s $(SHLIB_EXACT_VER) $(SHLIB_ABI_VER)
+-	ln -s $(SHLIB_ABI_VER) $(SHLIB_ANY_VER)
++	ln -s $(notdir $(SHLIB_EXACT_VER)) $(SHLIB_ABI_VER)
++	ln -s $(notdir $(SHLIB_ABI_VER)) $(SHLIB_ANY_VER)
+ endif
+ endif
+ ifneq (,$(IMPORT_LIBRARY))
diff --git a/source/l/js185/js185.SlackBuild b/source/l/js185/js185.SlackBuild
new file mode 100755
index 00000000..51513388
--- /dev/null
+++ b/source/l/js185/js185.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for SpiderMonkey
+
+# Copyright 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=js185
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+TARNAME=js
+TARVERS=1.8.5
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $TARNAME-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $TARNAME-$TARVERS || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+cd js/src
+
+patch -p0 < $CWD/js185-destdir.patch || exit 1
+
+CXXFLAGS="$SLKCFLAGS" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --build=$ARCH-slackware-linux \
+  --enable-optimize="-O2" \
+  --enable-threadsafe \
+  --with-system-nspr \
+  --with-nspr-prefix=/usr || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Oops, Makefile missed this:
+cp -a shell/js $PKG/usr/bin
+
+# No need for this:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.a
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp ../../README README.html $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/js185/slack-desc b/source/l/js185/slack-desc
new file mode 100644
index 00000000..ac323daf
--- /dev/null
+++ b/source/l/js185/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+js185: js185 (SpiderMonkey - Mozilla's JavaScript Engine)
+js185:
+js185: SpiderMonkey is Mozilla's JavaScript engine written in C/C++. 
+js185: It is used in various Mozilla products (including Firefox) and is 
+js185: available under MPL/GPL/LGPL tri-license.
+js185:
+js185: Homepage: http://www.mozilla.org/js/spidermonkey
+js185:
+js185:
+js185:
+js185:
diff --git a/source/l/keybinder/keybinder.SlackBuild b/source/l/keybinder/keybinder.SlackBuild
new file mode 100755
index 00000000..7e1da3b0
--- /dev/null
+++ b/source/l/keybinder/keybinder.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Slackware build script for keybinder
+
+# Copyright 2011  Robby Workman, Northport, Alabama, USA
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=keybinder
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-python \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* examples \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/keybinder/slack-desc b/source/l/keybinder/slack-desc
new file mode 100644
index 00000000..9eb08026
--- /dev/null
+++ b/source/l/keybinder/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+keybinder: keybinder (keyboard shortcut library)
+keybinder:
+keybinder: keybinder is a library for registering global keyboard shortcuts. 
+keybinder: Keybinder works with GTK-based applications using the X Window System.
+keybinder:
+keybinder: Homepage: http://kaizer.se/wiki/keybinder/
+keybinder:
+keybinder:
+keybinder:
+keybinder:
+keybinder:
diff --git a/source/l/keyutils/keyutils.SlackBuild b/source/l/keyutils/keyutils.SlackBuild
new file mode 100755
index 00000000..969b53cd
--- /dev/null
+++ b/source/l/keyutils/keyutils.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=keyutils
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* LICENSE* README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Relocate man pages:
+mv $PKG/usr/share/man $PKG/usr
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/keyutils/slack-desc b/source/l/keyutils/slack-desc
new file mode 100644
index 00000000..2091c554
--- /dev/null
+++ b/source/l/keyutils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+keyutils: keyutils (Kernel key management utilities)
+keyutils:
+keyutils: This package contains tools and a wrapper library to control the
+keyutils: Linux kernel key management facility and to provide a mechanism by
+keyutils: which the kernel can call back to user space to get a key
+keyutils: instantiated.
+keyutils:
+keyutils: Homepage:  http://people.redhat.com/~dhowells/keyutils/
+keyutils:
+keyutils:
+keyutils:
diff --git a/source/l/lcms/lcms.SlackBuild b/source/l/lcms/lcms.SlackBuild
index 19efaa31..a7d6f6fe 100755
--- a/source/l/lcms/lcms.SlackBuild
+++ b/source/l/lcms/lcms.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo lcms-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/lcms2/lcms2.SlackBuild b/source/l/lcms2/lcms2.SlackBuild
new file mode 100755
index 00000000..e695b74b
--- /dev/null
+++ b/source/l/lcms2/lcms2.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com>
+
+
+PKGNAM=lcms2
+VERSION=${VERSION:-2.3}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --enable-static=no \
+  --build=$TARGET
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+gzip -9 $PKG/usr/man/man?/*.?
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING INSTALL NEWS README* doc \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+find $PKG/usr/doc/$PKGNAM-$VERSION -type f -exec chmod 644 {} \;
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/lcms2/slack-desc b/source/l/lcms2/slack-desc
new file mode 100644
index 00000000..f283160a
--- /dev/null
+++ b/source/l/lcms2/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+lcms2: lcms2 (little cms engine, version 2)
+lcms2:
+lcms2: Little cms is a small, speed optimized color management engine.
+lcms2:
+lcms2: lcms was written by Marti Maria <marti@littlecms.com>.
+lcms2:
+lcms2:
+lcms2:
+lcms2:
+lcms2:
+lcms2:
diff --git a/source/l/libarchive/libarchive.info b/source/l/libarchive/libarchive.info
deleted file mode 100644
index 53405885..00000000
--- a/source/l/libarchive/libarchive.info
+++ /dev/null
@@ -1,2 +0,0 @@
-HOMEPAGE="http://people.freebsd.org/~kientzle/libarchive/"
-DOWNLOAD="http://people.freebsd.org/~kientzle/libarchive/src/libarchive-2.5.5.tar.gz"
diff --git a/source/l/libatasmart/README b/source/l/libatasmart/README
new file mode 100644
index 00000000..f926bea0
--- /dev/null
+++ b/source/l/libatasmart/README
@@ -0,0 +1,2 @@
+libatasmart is a lean, small and clean implementation of an
+ATA S.M.A.R.T. reading and parsing library.
diff --git a/source/l/libatasmart/libatasmart.SlackBuild b/source/l/libatasmart/libatasmart.SlackBuild
new file mode 100755
index 00000000..a9bc056c
--- /dev/null
+++ b/source/l/libatasmart/libatasmart.SlackBuild
@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Slackware build script for libatasmart
+
+# Copyright 2010  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
+
+PKGNAM=libatasmart
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --build=$TARGET || exit 1
+
+# Sure, ignore --docdir
+make $NUMJOBS docdir=/usr/doc/$PKGNAM-$VERSION || make  docdir=/usr/doc/$PKGNAM-$VERSION || exit 1
+make install docdir=/usr/doc/$PKGNAM-$VERSION DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  LGPL README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libatasmart/libatasmart.info b/source/l/libatasmart/libatasmart.info
new file mode 100644
index 00000000..39e1f559
--- /dev/null
+++ b/source/l/libatasmart/libatasmart.info
@@ -0,0 +1 @@
+http://0pointer.de/public/
diff --git a/source/l/libatasmart/slack-desc b/source/l/libatasmart/slack-desc
new file mode 100644
index 00000000..44a16094
--- /dev/null
+++ b/source/l/libatasmart/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+libatasmart: libatasmart (ATA S.M.A.R.T. library)
+libatasmart:
+libatasmart: libatasmart is a lean, small and clean implementation of an ATA
+libatasmart: S.M.A.R.T. ((Self-Monitoring, Analysis and Reporting Technology)
+libatasmart: reading and parsing library.  S.M.A.R.T. is a system used by hard
+libatasmart: drives to monitor factors that may impact drive reliability in the
+libatasmart: hope of predicting a drive failure before it occurs.
+libatasmart:
+libatasmart: Homepage: http://0pointer.de/blog/projects/being-smart.html
+libatasmart:
+libatasmart:
diff --git a/source/l/libbluedevil/libbluedevil.SlackBuild b/source/l/libbluedevil/libbluedevil.SlackBuild
new file mode 100755
index 00000000..402e1c90
--- /dev/null
+++ b/source/l/libbluedevil/libbluedevil.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Copyright 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=libbluedevil
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+cd ${PKGNAM}-$VERSION || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Build and install:
+mkdir build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc/kde \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DBUILD_tests:BOOL=OFF \
+    ..
+  make $NUMJOBS VERBOSE=1 || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING README* $PKG/usr/doc/$PKGNAM-$VERSION || true
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libbluedevil/slack-desc b/source/l/libbluedevil/slack-desc
new file mode 100644
index 00000000..b1aef4b1
--- /dev/null
+++ b/source/l/libbluedevil/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libbluedevil: libbluedevil (Qt wrapper for bluez)
+libbluedevil: 
+libbluedevil: This is a Qt-based library for handling Bluetooth functionality.
+libbluedevil:
+libbluedevil: Homepage: http://ereslibre.es/
+libbluedevil:
+libbluedevil:
+libbluedevil:
+libbluedevil:
+libbluedevil:
+libbluedevil:
diff --git a/source/l/libcaca/libcaca.SlackBuild b/source/l/libcaca/libcaca.SlackBuild
index 5c386be4..709c61c0 100755
--- a/source/l/libcaca/libcaca.SlackBuild
+++ b/source/l/libcaca/libcaca.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libcaca
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -80,6 +80,7 @@ CFLAGS="$SLKCFLAGS" \
   --program-prefix= \
   --program-suffix= \
   --disable-imlib2 \
+  --disable-ruby \
   --enable-slang \
   --enable-ncurses \
   --enable-x11 \
diff --git a/source/l/libcanberra/libcanberra.SlackBuild b/source/l/libcanberra/libcanberra.SlackBuild
new file mode 100755
index 00000000..38f8f86f
--- /dev/null
+++ b/source/l/libcanberra/libcanberra.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Slackware build script for libcanberra
+
+# Copyright 2010,2011,2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=libcanberra
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-oss \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a COPYING* LGPL README* $PKG/usr/doc/$PKGNAM-$VERSION
+( cd $PKG/usr/doc/$PKGNAM-$VERSION ; ln -s ../../share/gtk-doc/html/libcanberra html )
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libcanberra/libcanberra.url b/source/l/libcanberra/libcanberra.url
new file mode 100644
index 00000000..6dc05d62
--- /dev/null
+++ b/source/l/libcanberra/libcanberra.url
@@ -0,0 +1 @@
+http://0pointer.de/lennart/projects/libcanberra/
diff --git a/source/l/libcanberra/slack-desc b/source/l/libcanberra/slack-desc
new file mode 100644
index 00000000..7c954b7c
--- /dev/null
+++ b/source/l/libcanberra/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+libcanberra: libcanberra (XDG Sound Theme and Name Spec implementation)
+libcanberra:
+libcanberra: libcanberra is an implementation of the XDG Sound Theme and Name 
+libcanberra: Specifications, for generating event sounds on free desktops. 
+libcanberra: It comes with several backends for several audio systems and is
+libcanberra: designed to be portable.
+libcanberra:
+libcanberra: Homepage: http://0pointer.de/lennart/projects/libcanberra/
+libcanberra:
+libcanberra:
+libcanberra:
diff --git a/source/l/libcap/libcap-2.20.tar.sign b/source/l/libcap/libcap-2.20.tar.sign
deleted file mode 100644
index 21c50722..00000000
--- a/source/l/libcap/libcap-2.20.tar.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNNtZOyGugalF9Dw4RAhNYAJ4hyECyyIeN/d8WBPq8xeosRuO5egCfQFdk
-SykdiTKqeb+JHeiCSI9GYTk=
-=Rz1c
------END PGP SIGNATURE-----
diff --git a/source/l/libcap/libcap-2.22.tar.bz2.sign b/source/l/libcap/libcap-2.22.tar.bz2.sign
new file mode 100644
index 00000000..31eaad16
--- /dev/null
+++ b/source/l/libcap/libcap-2.22.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.11 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBOLVY5yGugalF9Dw4RApFNAJwKUXnGMy+1QbBXJJAY9nCIPEVO5ACfcdWO
+vSlbjNX9WvZ99amrBhK6sag=
+=v2dJ
+-----END PGP SIGNATURE-----
diff --git a/source/l/libcap/libcap.SlackBuild b/source/l/libcap/libcap.SlackBuild
index 57cfc584..796da778 100755
--- a/source/l/libcap/libcap.SlackBuild
+++ b/source/l/libcap/libcap.SlackBuild
@@ -24,7 +24,7 @@
 
 
 PKGNAM=libcap
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -64,7 +64,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP 
 rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
 cd $PKGNAM-$VERSION || exit 1
 
 zcat $CWD/libcap.capability.h.fix.broken.includes.diff.gz | patch -p1 || exit 1
diff --git a/source/l/libcddb/libcddb.SlackBuild b/source/l/libcddb/libcddb.SlackBuild
index 6891d13f..6d5e1a7e 100755
--- a/source/l/libcddb/libcddb.SlackBuild
+++ b/source/l/libcddb/libcddb.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libcddb
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libcdio/libcdio.SlackBuild b/source/l/libcdio/libcdio.SlackBuild
index 9379591f..3ca8e8ae 100755
--- a/source/l/libcdio/libcdio.SlackBuild
+++ b/source/l/libcdio/libcdio.SlackBuild
@@ -22,32 +22,42 @@
 
 
 PKGNAM=libcdio
-VERSION=${VERSION:-$(echo $(basename $(echo $PKGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)}
-ARCH=${ARCH:-x86_64}
+VERSION=${VERSION:-$(echo $(basename $(echo $PKGNAM-*.tar.xz | cut -f 2 -d -) .tar.xz) | cut -f 2 -d -)}
+BUILD=${BUILD:-1}
+
 NUMJOBS=${NUMJOBS:-" -j7 "}
-BUILD=${BUILD:-2}
 
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
+rm -rf $PKG
+mkdir -p $TMP $PKG
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1
 cd ${PKGNAM}-$VERSION
 
 # Make sure ownerships and permissions are sane:
@@ -105,6 +115,14 @@ cp -a \
   AUTHORS COPYING INSTALL MSVC NEWS README README.libcdio THANKS TODO \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/libcdio/libcdio.url b/source/l/libcdio/libcdio.url
new file mode 100644
index 00000000..e28aefe4
--- /dev/null
+++ b/source/l/libcdio/libcdio.url
@@ -0,0 +1 @@
+http://ftp.gnu.org/gnu/libcdio/
diff --git a/source/l/libcroco/libcroco.SlackBuild b/source/l/libcroco/libcroco.SlackBuild
new file mode 100755
index 00000000..4eed5c61
--- /dev/null
+++ b/source/l/libcroco/libcroco.SlackBuild
@@ -0,0 +1,104 @@
+#!/bin/sh
+
+# Slackware build script for libcroco
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libcroco
+VERSION=${VERSION:-0.6.5}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README TODO docs/examples \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libcroco/libcroco.url b/source/l/libcroco/libcroco.url
new file mode 100644
index 00000000..7c209ee9
--- /dev/null
+++ b/source/l/libcroco/libcroco.url
@@ -0,0 +1 @@
+http://ftp.gnome.org/pub/gnome/sources/libcroco/
diff --git a/source/l/libcroco/slack-desc b/source/l/libcroco/slack-desc
new file mode 100644
index 00000000..eabe8cfd
--- /dev/null
+++ b/source/l/libcroco/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+libcroco: libcroco (CSS2 parsing and manipulation library)
+libcroco:
+libcroco: Libcroco is a standalone CSS2 parsing and manipulation library.
+libcroco: The parser provides a low level event driven SAC like API and a CSS
+libcroco: object model like API.
+libcroco:
+libcroco: Libcroco provides a CSS2 selection engine and an experimental
+libcroco: XML/CSS rendering engine.
+libcroco:
+libcroco:
+libcroco:
diff --git a/source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild b/source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild
index 7e14ad03..ccd77d03 100755
--- a/source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild
+++ b/source/l/libdbusmenu-qt/libdbusmenu-qt.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2010  Eric Hameleers, Eindhoven, The Netherlands
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2011, 2012  Eric Hameleers, Eindhoven, The Netherlands
+# Copyright 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -31,24 +31,22 @@
 
 PKGNAM=libdbusmenu-qt
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -63,6 +61,10 @@ else
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -99,6 +101,10 @@ cp -a \
   COPYING NEWS README \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/doc
+mv $PKG/usr/share/doc/dbusmenu-qt/* $PKG/usr/doc/$PKGNAM-$VERSION/doc
+rm -rf $PKG/usr/share/doc
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/libdbusmenu-qt/slack-desc b/source/l/libdbusmenu-qt/slack-desc
index 0a8aba0e..6e72c25f 100644
--- a/source/l/libdbusmenu-qt/slack-desc
+++ b/source/l/libdbusmenu-qt/slack-desc
@@ -12,8 +12,8 @@ libdbusmenu-qt: This library provides a Qt implementation of the DBusMenu protoc
 libdbusmenu-qt: The DBusMenu protocol makes it possible for applications to export
 libdbusmenu-qt: and import their menus over DBus.
 libdbusmenu-qt:
+libdbusmenu-qt: Homepage:  http://people.canonical.com/~agateau/dbusmenu/
 libdbusmenu-qt:
 libdbusmenu-qt:
 libdbusmenu-qt:
-libdbusmenu-qt: Homepage:  http://people.canonical.com/~agateau/dbusmenu/
 libdbusmenu-qt:
diff --git a/source/l/libdvdread/libdvdread.SlackBuild b/source/l/libdvdread/libdvdread.SlackBuild
index 5dbf618e..84ddae08 100755
--- a/source/l/libdvdread/libdvdread.SlackBuild
+++ b/source/l/libdvdread/libdvdread.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=libdvdread
-VERSION=4.1.3
+VERSION=4.2.0
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/l/libexif/libexif.SlackBuild b/source/l/libexif/libexif.SlackBuild
index 61b675cb..83e24c4a 100755
--- a/source/l/libexif/libexif.SlackBuild
+++ b/source/l/libexif/libexif.SlackBuild
@@ -88,7 +88,7 @@ strip -g $PKG/usr/lib/*.a
 rm -rf $PKG/usr/share/doc
 mkdir -p $PKG/usr/doc/libexif-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* NEWS README* \
+  AUTHORS COPYING* NEWS README* \
   $PKG/usr/doc/libexif-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/l/libffi/libffi.SlackBuild b/source/l/libffi/libffi.SlackBuild
new file mode 100755
index 00000000..c1a2e848
--- /dev/null
+++ b/source/l/libffi/libffi.SlackBuild
@@ -0,0 +1,132 @@
+#!/bin/sh
+
+# Slackware build script for libffi
+
+# Copyright 2011,2012  Robby Workman, Northport, Alabama, USA
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libffi
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a LICENSE README $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libffi/slack-desc b/source/l/libffi/slack-desc
new file mode 100644
index 00000000..8e8dd435
--- /dev/null
+++ b/source/l/libffi/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+libffi: libffi (A Portable Foreign Function Interface Library)
+libffi:
+libffi: FFI stands for Foreign Function Interface.  A foreign function 
+libffi: interface is the popular name for the interface that allows code 
+libffi: written in one language to call code written in another language. 
+libffi: The libffi library really only provides the lowest, machine dependent 
+libffi: layer of a fully featured foreign function interface.  
+libffi:
+libffi: Homepage: http://sourceware.org/libffi/
+libffi:
+libffi:
diff --git a/source/l/libgnome-keyring/libgnome-keyring.SlackBuild b/source/l/libgnome-keyring/libgnome-keyring.SlackBuild
new file mode 100755
index 00000000..b3e1820e
--- /dev/null
+++ b/source/l/libgnome-keyring/libgnome-keyring.SlackBuild
@@ -0,0 +1,107 @@
+#!/bin/sh
+
+# Slackware build script for libgnome-keyring
+
+# Copyright 2010-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libgnome-keyring
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libgnome-keyring/slack-desc b/source/l/libgnome-keyring/slack-desc
new file mode 100644
index 00000000..1d759e20
--- /dev/null
+++ b/source/l/libgnome-keyring/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+libgnome-keyring: libgnome-keyring (gnome-keyring library)
+libgnome-keyring:
+libgnome-keyring: gnome-keyring is a program that keep password and other secrets
+libgnome-keyring: for users.  The library libgnome-keyring is used by applications
+libgnome-keyring: to integrate with the gnome keyring system.
+libgnome-keyring:
+libgnome-keyring:
+libgnome-keyring:
+libgnome-keyring:
+libgnome-keyring:
+libgnome-keyring:
diff --git a/source/l/libgphoto2/fix-usb_id-callout-for-udev-175.diff b/source/l/libgphoto2/fix-usb_id-callout-for-udev-175.diff
new file mode 100644
index 00000000..fe65dabd
--- /dev/null
+++ b/source/l/libgphoto2/fix-usb_id-callout-for-udev-175.diff
@@ -0,0 +1,12 @@
+diff -Nur libgphoto2-2.4.11.orig/packaging/generic/print-camera-list.c libgphoto2-2.4.11/packaging/generic/print-camera-list.c
+--- libgphoto2-2.4.11.orig/packaging/generic/print-camera-list.c	2011-04-06 16:42:09.000000000 -0500
++++ libgphoto2-2.4.11/packaging/generic/print-camera-list.c	2011-12-10 20:31:37.621092267 -0600
+@@ -409,7 +409,7 @@
+ 		"ACTION!=\"add\", GOTO=\"libgphoto2_rules_end\"\n"
+ 		"SUBSYSTEM!=\"usb\", GOTO=\"libgphoto2_usb_end\"\n"
+ 		"ENV{DEVTYPE}!=\"usb_device\", GOTO=\"libgphoto2_usb_end\"\n\n"
+-		"ENV{ID_USB_INTERFACES}==\"\", IMPORT{program}=\"usb_id --export %%p\"\n"
++		"ENV{ID_USB_INTERFACES}==\"\", IMPORT{builtin}=\"usb_id\"\n"
+ 		/* ignore mass storage class having devices in mark-up */
+ 		"ENV{ID_USB_INTERFACES}==\"*:08*:*\", GOTO=\"libgphoto2_usb_end\"\n"
+ 		/* shortcut the most common camera driver, ptp class, so we avoid parsing 1000
diff --git a/source/l/libgphoto2/libgphoto2.SlackBuild b/source/l/libgphoto2/libgphoto2.SlackBuild
index ad1a0e7e..989653a4 100755
--- a/source/l/libgphoto2/libgphoto2.SlackBuild
+++ b/source/l/libgphoto2/libgphoto2.SlackBuild
@@ -24,7 +24,7 @@
 
 PKGNAM=libgphoto2
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -72,6 +72,9 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
+# udev-175 bundles usb_id into the udevd binary
+zcat $CWD/fix-usb_id-callout-for-udev-175.diff.gz | patch -p1 || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -111,8 +114,8 @@ LIBDIR=$PKG/usr/lib${LIBDIRSUFFIX}
 export LD_LIBRARY_PATH CAMLIBS LIBDIR
 # Generate udev rules
 mkdir -p $PKG/lib/udev/rules.d
-$PKG/usr/bin/print-camera-list udev-rules mode 0660 owner root group plugdev \
-  > $PKG/lib/udev/rules.d/90-libgphoto2.rules
+$PKG/usr/bin/print-camera-list udev-rules version 136 mode 0660 owner root group plugdev \
+  > $PKG/lib/udev/rules.d/40-libgphoto2.rules
 # Generate fdi files
 mkdir -p $PKG/usr/share/hal/fdi/information/20thirdparty
 $PKG/usr/bin/print-camera-list hal-fdi \
@@ -121,8 +124,20 @@ $PKG/usr/bin/print-camera-list hal-fdi-device \
   > $PKG/usr/share/hal/fdi/information/20thirdparty/10-camera-libgphoto2-device.fdi
 unset LD_LIBRARY_PATH CAMLIBS LIBDIR   # Unset these just in case
 
-# Compress man pages
-find $PKG/usr/man -type f -exec gzip -9 {} \;
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
diff --git a/source/l/libgphoto2/slack-desc b/source/l/libgphoto2/slack-desc
index 9de29cbe..dbc51e5c 100644
--- a/source/l/libgphoto2/slack-desc
+++ b/source/l/libgphoto2/slack-desc
@@ -5,11 +5,11 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-          |-----handy-ruler-------------------------------------------------|
+          |-----handy-ruler------------------------------------------------------|
 libgphoto2: libgphoto2 (Digital Camera Library)
 libgphoto2:
-libgphoto2: libgphoto2 is a library that can be used by
-libgphoto2: applications to access various digital cameras.
+libgphoto2: libgphoto2 is a library that can be used by applications to access
+libgphoto2: various digital cameras.
 libgphoto2:
 libgphoto2: Homepage: http://www.gphoto.org/
 libgphoto2:
diff --git a/source/l/libgpod/libgpod.SlackBuild b/source/l/libgpod/libgpod.SlackBuild
index 4adbe650..f4075495 100755
--- a/source/l/libgpod/libgpod.SlackBuild
+++ b/source/l/libgpod/libgpod.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libgpod
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libgsf/libgsf.SlackBuild b/source/l/libgsf/libgsf.SlackBuild
index 4fd64311..7d955ec4 100755
--- a/source/l/libgsf/libgsf.SlackBuild
+++ b/source/l/libgsf/libgsf.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libgsf
 VERSION=${VERSION:-$(echo libgsf-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/l/libical/libical.info b/source/l/libical/libical.info
deleted file mode 100644
index 500e53eb..00000000
--- a/source/l/libical/libical.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="libical"
-VERSION="0.41"
-HOMEPAGE="http://freeassociation.sourceforge.net/"
-DOWNLOAD="http://downloads.sourceforge.net/freeassociation/libical-0.41.tar.gz"
-MD5SUM="981731f5618c7f1944e0262babdcc910"
-MAINTAINER="ppr:kut"
-EMAIL="pprkut@liwjatan.at"
-APPROVED="dsomero"
diff --git a/source/l/libical/slack-desc b/source/l/libical/slack-desc
index 6b760123..20ee7937 100644
--- a/source/l/libical/slack-desc
+++ b/source/l/libical/slack-desc
@@ -14,6 +14,6 @@ libical: 2447). It parses iCal components and provides C/C++/Python/Java APIs
 libical: for manipulating the component properties, parameters, and
 libical: subcomponents.
 libical:
-libical: Homepage: http://freeassociation.sourceforge.net/
+libical: Homepage:  http://sourceforge.net/projects/freeassociation/
 libical:
 libical:
diff --git a/source/l/libidn/libidn.SlackBuild b/source/l/libidn/libidn.SlackBuild
index e272f260..905b3e48 100755
--- a/source/l/libidn/libidn.SlackBuild
+++ b/source/l/libidn/libidn.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libidn
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libieee1284/libieee1284.SlackBuild b/source/l/libieee1284/libieee1284.SlackBuild
index ec2cdf50..ce601a85 100755
--- a/source/l/libieee1284/libieee1284.SlackBuild
+++ b/source/l/libieee1284/libieee1284.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libieee1284
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libjpeg/libjpeg.SlackBuild b/source/l/libjpeg/libjpeg.SlackBuild
index 9d43d22e..a5d3783c 100755
--- a/source/l/libjpeg/libjpeg.SlackBuild
+++ b/source/l/libjpeg/libjpeg.SlackBuild
@@ -58,7 +58,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
-rm -rf jpeg-8
+rm -rf jpeg-$(echo $VERSION | cut -f 2 -d v)
 tar xvf $CWD/jpegsrc.${VERSION}.tar.?z* || exit 1
 cd jpeg-$(echo $VERSION | cut -f 2 -d v)
 
diff --git a/source/l/liblastfm/liblastfm.SlackBuild b/source/l/liblastfm/liblastfm.SlackBuild
index d87cf0da..12da473e 100755
--- a/source/l/liblastfm/liblastfm.SlackBuild
+++ b/source/l/liblastfm/liblastfm.SlackBuild
@@ -1,4 +1,4 @@
-#!/bin/sh 
+#!/bin/sh
 
 # Slackware build script for liblastfm
 
@@ -50,6 +50,7 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
+rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
@@ -59,21 +60,16 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# Fix for Ruby 1.9.1:
-sed -i "s/require 'ftools'//g" admin/*
-
-./configure \
-  --prefix /usr \
-  --release
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+cmake \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DCMAKE_INSTALL_LIBDIR="lib${LIBDIRSUFFIX}" \
+  -DBUILD_FINGERPRINT="ON"
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# For 64-bit, make sure that the libraries are in the proper directory:
-if [ "$LIBDIRSUFFIX" = "64" ]; then
-  mv $PKG/usr/lib $PKG/usr/lib64
-fi
-
 if [ -d $PKG/usr/man ]; then
   gzip -9 $PKG/usr/man/man?/*
 fi
diff --git a/source/l/libmsn/libmsn.SlackBuild b/source/l/libmsn/libmsn.SlackBuild
index 5de598ef..2689d910 100755
--- a/source/l/libmsn/libmsn.SlackBuild
+++ b/source/l/libmsn/libmsn.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for libmsn
 
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -23,21 +23,20 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=libmsn
-VERSION=4.1
-BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:--j6}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -50,17 +49,27 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
 cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/libmsn.gcc47.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/l/libmsn/libmsn.gcc47.diff b/source/l/libmsn/libmsn.gcc47.diff
new file mode 100644
index 00000000..34df7005
--- /dev/null
+++ b/source/l/libmsn/libmsn.gcc47.diff
@@ -0,0 +1,10 @@
+--- ./msn/util.cpp.orig	2009-07-22 14:57:10.000000000 -0500
++++ ./msn/util.cpp	2012-04-05 10:45:40.604000070 -0500
+@@ -30,6 +30,7 @@
+ #include <openssl/rand.h>
+ #include <cstring>
+ #include <sys/timeb.h>
++#include <unistd.h>
+ #include "md5.h"
+ #include "libsiren/siren7.h"
+ 
diff --git a/source/l/libmsn/slack-desc b/source/l/libmsn/slack-desc
index 8fe1410c..b026146d 100644
--- a/source/l/libmsn/slack-desc
+++ b/source/l/libmsn/slack-desc
@@ -11,9 +11,9 @@ libmsn:
 libmsn: Libmsn is a reusable, open-source, fully documented library for
 libmsn: connecting to Microsoft's MSN Messenger service. 
 libmsn:
+libmsn: Homepage:  http://sourceforge.net/projects/libmsn/
 libmsn:
 libmsn:
 libmsn:
 libmsn:
-libmsn: Homepage:  http://sourceforge.net/projects/libmsn/
 libmsn:
diff --git a/source/l/libmtp/libmtp.SlackBuild b/source/l/libmtp/libmtp.SlackBuild
index c00fc599..f7b90a3f 100755
--- a/source/l/libmtp/libmtp.SlackBuild
+++ b/source/l/libmtp/libmtp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -84,13 +84,13 @@ CFLAGS="$SLKCFLAGS" \
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Add udev rules:
-mkdir -p $PKG/lib/udev/rules.d
-sed -e 's/MODE="666"/GROUP="audio", MODE="0660"/' libmtp.rules \
-  > $PKG/lib/udev/rules.d/90-libmtp.rules
-# Add device information for HAL:
-mkdir -p $PKG/usr/share/hal/fdi/information/20thirdparty/
-cat libmtp.fdi > $PKG/usr/share/hal/fdi/information/20thirdparty/10-libmtp.fdi
+# Commented out, since the rules are added by the Makefile, and since
+# there's no longer any match for MODE=
+#
+## Add udev rules:
+#mkdir -p $PKG/lib/udev/rules.d
+#sed -e 's/MODE="666"/GROUP="audio", MODE="0660"/' libmtp.rules \
+#  > $PKG/lib/udev/rules.d/90-libmtp.rules
 
 # Guess someone didn't have enough to drink:
 ( cd $PKG/usr/bin
@@ -129,13 +129,18 @@ if [ -d $PKG/usr/info ]; then
   )
 fi
 
-# Why even bother to support --docdir if you can't make it work?
-mkdir -p $PKG/usr/doc
-mv $PKG/usr/share/doc/${PKGNAM}-$VERSION $PKG/usr/doc
-rmdir $PKG/usr/share/doc
-
-# We don't need these here
-rm -f $PKG/usr/doc/${PKGNAM}-$VERSION/libmtp.{rules,sh,usermap}
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING ChangeLog INSTALL README* TODO \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/l/libnl3/doinst.sh b/source/l/libnl3/doinst.sh
new file mode 100644
index 00000000..535c3498
--- /dev/null
+++ b/source/l/libnl3/doinst.sh
@@ -0,0 +1,16 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/libnl/classid.new
+config etc/libnl/pktloc.new
+
diff --git a/source/l/libnl3/libnl3.SlackBuild b/source/l/libnl3/libnl3.SlackBuild
new file mode 100755
index 00000000..3ac310f8
--- /dev/null
+++ b/source/l/libnl3/libnl3.SlackBuild
@@ -0,0 +1,126 @@
+#!/bin/sh
+
+# Slackware build script for libnl3
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libnl
+PKGNAME=libnl3
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --disable-static \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't clobber config files
+mv $PKG/etc/libnl/classid{,.new}
+mv $PKG/etc/libnl/pktloc{,.new}
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a COPYING doc/README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAME-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libnl3/slack-desc b/source/l/libnl3/slack-desc
new file mode 100644
index 00000000..75af03bf
--- /dev/null
+++ b/source/l/libnl3/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+libnl3: libnl3 (Netlink Protocol Library Suite version 3)
+libnl3:
+libnl3: The libnl suite is a collection of libraries providing APIs to 
+libnl3: netlink protocol based Linux kernel interfaces.
+libnl3: Netlink is a IPC mechanism primarily between the kernel and user 
+libnl3: space processes. It was designed to be a more flexible successor 
+libnl3: to ioctl to provide mainly networking related kernel configuration 
+libnl3: and monitoring interfaces. 
+libnl3:
+libnl3: Homepage: http://www.infradead.org/~tgr/libnl/
+libnl3:
diff --git a/source/l/libnotify/libnotify.SlackBuild b/source/l/libnotify/libnotify.SlackBuild
index 84f4c5b3..ffc249b3 100755
--- a/source/l/libnotify/libnotify.SlackBuild
+++ b/source/l/libnotify/libnotify.SlackBuild
@@ -24,7 +24,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=libnotify
-VERSION=0.5.2
+VERSION=0.7.5
 BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
@@ -81,9 +81,16 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a AUTHORS ChangeLog COPYING README $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a AUTHORS COPYING README $PKG/usr/doc/$PKGNAM-$VERSION
 ( cd $PKG/usr/doc/$PKGNAM-$VERSION ; ln -s ../../share/gtk-doc/html/libnotify html )
-cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/l/libpcap/libpcap.SlackBuild b/source/l/libpcap/libpcap.SlackBuild
index 0460087a..f886ee3c 100755
--- a/source/l/libpcap/libpcap.SlackBuild
+++ b/source/l/libpcap/libpcap.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -79,13 +79,6 @@ make install DESTDIR=$PKG || exit 1
 
 strip --strip-debug libpcap.so.1.?.?
 
-cp libpcap.so.?.?.? $PKG/usr/lib${LIBDIRSUFFIX}
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  ln -sf libpcap.so.1.?.? libpcap.so.1
-  ln -sf libpcap.so.1 libpcap.so.0
-  ln -sf libpcap.so.1 libpcap.so
-)
-
 mkdir -p $PKG/usr/doc/libpcap-$VERSION
 cp -a \
   CHANGES CREDITS INSTALL.txt LICENSE README* TODO VERSION \
@@ -105,6 +98,9 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \
   ln -sf pcap_next_ex.3pcap pcap_next.3pcap
   ln -sf pcap_open_offline.3pcap pcap_fopen_offline.3pcap
   ln -sf pcap_setnonblock.3pcap pcap_getnonblock.3pcap
+  ln -sf pcap_findalldevs.3pcap pcap_freealldevs.3pcap
+  ln -sf pcap_free_tstamp_types.3pcap pcap_list_tstamp_types.3pcap
+  ln -sf pcap_free_datalinks.3pcap pcap_list_datalinks.3pcap
 )
 
 # Compress and if needed symlink the man pages:
diff --git a/source/l/libpng/libpng.SlackBuild b/source/l/libpng/libpng.SlackBuild
index 1b82edd5..d338e5c6 100755
--- a/source/l/libpng/libpng.SlackBuild
+++ b/source/l/libpng/libpng.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION_OLD=1.2.44
-VERSION_NEW=1.4.5
+VERSION_OLD=1.2.50
+VERSION_NEW=1.4.12
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/l/libpng/libpng.url b/source/l/libpng/libpng.url
new file mode 100644
index 00000000..f50d4275
--- /dev/null
+++ b/source/l/libpng/libpng.url
@@ -0,0 +1 @@
+ftp://ftp.simplesystems.org/pub/libpng/png/src/
diff --git a/source/l/libproxy/gcc47-include-unistd.h.diff b/source/l/libproxy/gcc47-include-unistd.h.diff
new file mode 100644
index 00000000..fc08aeea
--- /dev/null
+++ b/source/l/libproxy/gcc47-include-unistd.h.diff
@@ -0,0 +1,22 @@
+diff -Nur libproxy-0.4.7.orig/libproxy/modules/config_sysconfig.cpp libproxy-0.4.7/libproxy/modules/config_sysconfig.cpp
+--- libproxy-0.4.7.orig/libproxy/modules/config_sysconfig.cpp	2011-06-06 16:44:37.220019451 -0500
++++ libproxy-0.4.7/libproxy/modules/config_sysconfig.cpp	2012-04-15 23:35:45.752467960 -0500
+@@ -18,6 +18,7 @@
+  ******************************************************************************/
+ 
+ #include <sys/stat.h>
++#include <unistd.h>
+ #include <cstdlib>
+ #include <map>
+ #include <fstream>
+diff -Nur libproxy-0.4.7.orig/libproxy/url.cpp libproxy-0.4.7/libproxy/url.cpp
+--- libproxy-0.4.7.orig/libproxy/url.cpp	2011-06-06 16:44:37.216019447 -0500
++++ libproxy-0.4.7/libproxy/url.cpp	2012-04-15 23:35:05.654783125 -0500
+@@ -27,6 +27,7 @@
+ #define close _close
+ #endif
+ #include <fcntl.h> // For ::open()
++#include <unistd.h> //For close(), read()
+ #include <cstring> // For memcpy()
+ #include <sstream> // For int/string conversion (using stringstream)
+ #include <cstdio>  // For sscanf()
diff --git a/source/l/libproxy/libproxy.SlackBuild b/source/l/libproxy/libproxy.SlackBuild
new file mode 100755
index 00000000..fecbceb8
--- /dev/null
+++ b/source/l/libproxy/libproxy.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Slackware build script for libproxy
+
+# Copyright 2009,2010,2011  Robby Workman  Northport, AL, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libproxy
+VERSION=${VERSION:-0.4.7}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# 0.4.7 won't build against seamonkey's nss stuff, and the first commit in
+# svn after that release disables its use in favor of nspr and js185
+zcat $CWD/only_link_mozjs185.diff.gz | patch -p0 --verbose || exit 1
+
+# Include unistd.h for gcc-4.7.x:
+zcat $CWD/gcc47-include-unistd.h.diff.gz | patch -p1 --verbose || exit 1
+
+cmake . \
+  -DCMAKE_C_FLAGS="$SLKCFLAGS" \
+  -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DLIB_INSTALL_DIR=/usr/lib${LIBDIRSUFFIX} \
+  -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+  -DMODULE_INSTALL_DIR=/usr/lib${LIBDIRSUFFIX}/libproxy/${VERSION}/modules \
+  -DPERL_VENDORINSTALL=yes || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libproxy/libproxy.url b/source/l/libproxy/libproxy.url
new file mode 100644
index 00000000..3897ae58
--- /dev/null
+++ b/source/l/libproxy/libproxy.url
@@ -0,0 +1 @@
+http://code.google.com/p/libproxy/
diff --git a/source/l/libproxy/only_link_mozjs185.diff b/source/l/libproxy/only_link_mozjs185.diff
new file mode 100644
index 00000000..84016ac8
--- /dev/null
+++ b/source/l/libproxy/only_link_mozjs185.diff
@@ -0,0 +1,46 @@
+Index: libproxy/cmake/modules/pacrunner_mozjs.cmk
+===================================================================
+--- libproxy/cmake/modules/pacrunner_mozjs.cmk	(revision 814)
++++ libproxy/cmake/modules/pacrunner_mozjs.cmk	(revision 815)
+@@ -7,19 +7,15 @@
+     include_directories("${MOZJS_INCLUDE_DIR}")
+   endif()
+ elseif(NOT APPLE)
+-  set(MOZJS_SEARCH_ORDER "mozilla-js;xulrunner-js;firefox-js;seamonkey-js" CACHE STRING "MozJS search order")
+   option(WITH_MOZJS "Search for MOZJS package" ON)
+   if (WITH_MOZJS)
+-    foreach(MOZJSLIB ${MOZJS_SEARCH_ORDER})
+-      pkg_search_module(MOZJS ${MOZJSLIB}>=2.0b12)
+-      if(MOZJS_FOUND)
+-        include_directories(${MOZJS_INCLUDE_DIRS})
+-        link_directories(${MOZJS_LIBRARY_DIRS})
+-        break()
+-      else()
+-        set(MOZJS_FOUND 0)
+-      endif()
+-    endforeach()
++    pkg_search_module(MOZJS mozjs185>=1.8.5)
++    if(MOZJS_FOUND)
++      include_directories(${MOZJS_INCLUDE_DIRS})
++      link_directories(${MOZJS_LIBRARY_DIRS})
++    else()
++      set(MOZJS_FOUND 0)
++    endif()
+   else()
+     set(MOZJS_FOUND 0)
+   endif()
+Index: NEWS
+===================================================================
+--- NEWS	(revision 814)
++++ NEWS	(revision 815)
+@@ -1,3 +1,10 @@
++New in version 0.4.8 (not yet released)
++==============================
++* Only support standalone mozjs185 as mozilla js engine.
++  xulrunner being part of the now lightning fast moving firefox
++  is impossible to be tracked as a dependency and it is not
++  supported by Mozilla to be used in this scenario.
++
+ New in version 0.4.7
+ ==============================
+ * Support/require xulrunner 2.0+
diff --git a/source/l/libproxy/slack-desc b/source/l/libproxy/slack-desc
new file mode 100644
index 00000000..05b109e0
--- /dev/null
+++ b/source/l/libproxy/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler-----------------------------------------------------|
+libproxy: libproxy (proxy configuration library)
+libproxy:
+libproxy: libproxy exists to answer the question: Given a network resource, 
+libproxy: how do I reach it?  It handles all the details, enabling you to get 
+libproxy: back to programming.  Just ask libproxy what proxy to use:  you get
+libproxy: simple code and your users get correct, consistent behavior and 
+libproxy: broad infrastructure compatibility. 
+libproxy:
+libproxy: Homepage: http://code.google.com/p/libproxy/
+libproxy:
+libproxy:
diff --git a/source/l/librsvg/librsvg.SlackBuild b/source/l/librsvg/librsvg.SlackBuild
index ff765afe..90d995a8 100755
--- a/source/l/librsvg/librsvg.SlackBuild
+++ b/source/l/librsvg/librsvg.SlackBuild
@@ -77,9 +77,7 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var/lib \
   --mandir=/usr/man \
   --enable-static=no \
-  --with-svgz \
   --build=$ARCH-slackware-linux
-#  --with-croco \
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
@@ -87,8 +85,20 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/librsvg-$VERSION
 cp -a \
diff --git a/source/l/libsoup/libsoup.SlackBuild b/source/l/libsoup/libsoup.SlackBuild
new file mode 100755
index 00000000..48588368
--- /dev/null
+++ b/source/l/libsoup/libsoup.SlackBuild
@@ -0,0 +1,98 @@
+#!/bin/sh
+#
+# Slackware build script for libsoup
+#
+# Copyright 2009-2010  Erik W. Hanson, Minneapolis, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libsoup
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var/lib \
+  --disable-static \
+  --with-gnome \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install-strip DESTDIR=$PKG || exit 1
+
+## NOTE:  These _should_ go eventually, but for now it causes problems.
+## Don't ship .la files:
+#rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a COPYING* AUTHORS NEWS README* $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libsoup/slack-desc b/source/l/libsoup/slack-desc
new file mode 100644
index 00000000..80cd6ef0
--- /dev/null
+++ b/source/l/libsoup/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+libsoup: libsoup (an HTTP client/server library)
+libsoup:
+libsoup: Soup is an HTTP client/server library implementation in C.  It uses
+libsoup: GObjects and the glib main loop to integrate well with GTK+
+libsoup: applications, and has a synchronous API suitable for use in threaded
+libsoup: applications.
+libsoup:
+libsoup:
+libsoup:
+libsoup:
+libsoup:
diff --git a/source/l/libspectre/libspectre.SlackBuild b/source/l/libspectre/libspectre.SlackBuild
index 39668be3..70ae971b 100755
--- a/source/l/libspectre/libspectre.SlackBuild
+++ b/source/l/libspectre/libspectre.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-PRGNAM=libspectre
-VERSION=${VERSION:-0.2.5}
-BUILD=${BUILD:-2}
+PKGNAM=libspectre
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -39,7 +39,7 @@ NUMJOBS=${NUMJOBS:--j6}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -58,9 +58,9 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -101,14 +101,14 @@ if [ -d $PKG/usr/man ]; then
   )
 fi
 
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING* INSTALL NEWS README* TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/libssh/libssh.SlackBuild b/source/l/libssh/libssh.SlackBuild
new file mode 100755
index 00000000..cc60f00a
--- /dev/null
+++ b/source/l/libssh/libssh.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Copyright 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=libssh
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+cd ${PKGNAM}-$VERSION || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Build and install:
+mkdir build
+cd build
+  cmake \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DWITH_GCRYPT=1 \
+    -DWITH_SSH1=1 \
+    -DWITH_PCAP=1 \
+    -DWITH_SFTP=1 \
+    -DWITH_SERVER=1 \
+    -DWITH_STATIC_LIB=0 \
+    ..
+  make $NUMJOBS VERBOSE=1 || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS BSD ChangeLog COPYING INSTALL README doc/{API*,libssh*.txt} \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libssh/slack-desc b/source/l/libssh/slack-desc
new file mode 100644
index 00000000..12a1c192
--- /dev/null
+++ b/source/l/libssh/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+libssh: libssh (library implementing ssh protocols)
+libssh: 
+libssh: libssh is a mulitplatform C library implementing the SSHv2 and SSHv1
+libssh: protocol on client and server side.  With libssh, you can remotely
+libssh: execute programs, transfer files, and use a secure and transparent
+libssh: tunnel for your remote applications.
+libssh:
+libssh: Homepage: http://www.libssh.org/
+libssh:
+libssh:
+libssh:
diff --git a/source/l/libtasn1/libtasn1.SlackBuild b/source/l/libtasn1/libtasn1.SlackBuild
new file mode 100755
index 00000000..d9fb3d81
--- /dev/null
+++ b/source/l/libtasn1/libtasn1.SlackBuild
@@ -0,0 +1,124 @@
+#!/bin/sh
+
+# Slackware build script for libtasn1
+
+# Copyright 2010-2012  Robby Workman, Northport, Alabama, USA
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libtasn1
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --enable-shared \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+  #--disable-gtk-doc \
+  
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* THANKS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libtasn1/slack-desc b/source/l/libtasn1/slack-desc
new file mode 100644
index 00000000..da00dacb
--- /dev/null
+++ b/source/l/libtasn1/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler-----------------------------------------------------|
+libtasn1: libtasn1 (ASN.1 library)
+libtasn1:
+libtasn1: Libtasn1 is the GNU ASN.1 library.  Abstract Syntax Notation One
+libtasn1: (ASN.1) is a standard and flexible notation that describes rules and
+libtasn1: structures for representing, encoding, transmitting, and decoding
+libtasn1: data in telecommunications and computer networking.
+libtasn1:
+libtasn1: Libtasn1 was written by Fabio Fiorina.
+libtasn1:
+libtasn1:
+libtasn1:
diff --git a/source/l/libtiff/libtiff-CVE-2011-0192.patch b/source/l/libtiff/libtiff-CVE-2011-0192.patch
deleted file mode 100644
index 892f70e0..00000000
--- a/source/l/libtiff/libtiff-CVE-2011-0192.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Protect against a fax VL(n) codeword commanding a move left.  Without
-this, a malicious input file can generate an indefinitely large series
-of runs without a0 ever reaching the right margin, thus overrunning
-our buffer of run lengths.  Per CVE-2011-0192.  This is a modified
-version of a patch proposed by Drew Yao of Apple Product Security.
-It adds an unexpected() report, and disallows the equality case except
-for the first run of a line, since emitting a run without increasing a0
-still allows buffer overrun.  (We have to allow it for the first run to
-cover the case of encoding a zero-length run at start of line using VL.)
-
-
-diff -Naur tiff-3.9.4.orig/libtiff/tif_fax3.h tiff-3.9.4/libtiff/tif_fax3.h
---- tiff-3.9.4.orig/libtiff/tif_fax3.h	2010-06-08 14:50:42.000000000 -0400
-+++ tiff-3.9.4/libtiff/tif_fax3.h	2011-03-10 12:11:20.850839162 -0500
-@@ -478,6 +478,12 @@
- 	    break;							\
- 	case S_VL:							\
- 	    CHECK_b1;							\
-+	    if (b1 <= (int) (a0 + TabEnt->Param)) {			\
-+		if (b1 < (int) (a0 + TabEnt->Param) || pa != thisrun) {	\
-+		    unexpected("VL", a0);				\
-+		    goto eol2d;						\
-+		}							\
-+	    }								\
- 	    SETVALUE(b1 - a0 - TabEnt->Param);				\
- 	    b1 -= *--pb;						\
- 	    break;							\
diff --git a/source/l/libtiff/libtiff-CVE-2011-1167.patch b/source/l/libtiff/libtiff-CVE-2011-1167.patch
deleted file mode 100644
index d3fcf6f6..00000000
--- a/source/l/libtiff/libtiff-CVE-2011-1167.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Upstream patch for CVE-2011-1167, heap-based buffer overflow in thunder
-decoder (ZDI-CAN-1004).
-
-
-diff -Naur tiff-3.9.4.orig/libtiff/tif_thunder.c tiff-3.9.4/libtiff/tif_thunder.c
---- tiff-3.9.4.orig/libtiff/tif_thunder.c	2010-06-08 14:50:43.000000000 -0400
-+++ tiff-3.9.4/libtiff/tif_thunder.c	2011-03-18 12:17:13.635796403 -0400
-@@ -55,12 +55,32 @@
- static const int twobitdeltas[4] = { 0, 1, 0, -1 };
- static const int threebitdeltas[8] = { 0, 1, 2, 3, 0, -3, -2, -1 };
- 
--#define	SETPIXEL(op, v) { \
--	lastpixel = (v) & 0xf; \
--	if (npixels++ & 1) \
--	    *op++ |= lastpixel; \
--	else \
-+#define	SETPIXEL(op, v) {                     \
-+	lastpixel = (v) & 0xf;                \
-+        if ( npixels < maxpixels )         \
-+        {                                     \
-+	  if (npixels++ & 1)                  \
-+	    *op++ |= lastpixel;               \
-+	  else                                \
- 	    op[0] = (tidataval_t) (lastpixel << 4); \
-+        }                                     \
-+}
-+
-+static int
-+ThunderSetupDecode(TIFF* tif)
-+{
-+	static const char module[] = "ThunderSetupDecode";
-+
-+        if( tif->tif_dir.td_bitspersample != 4 )
-+        {
-+                TIFFErrorExt(tif->tif_clientdata, module,
-+                             "Wrong bitspersample value (%d), Thunder decoder only supports 4bits per sample.",
-+                             (int) tif->tif_dir.td_bitspersample );
-+                return 0;
-+        }
-+        
-+
-+	return (1);
- }
- 
- static int
-@@ -151,6 +171,7 @@
- 	(void) scheme;
- 	tif->tif_decoderow = ThunderDecodeRow;
- 	tif->tif_decodestrip = ThunderDecodeRow;
-+	tif->tif_setupdecode = ThunderSetupDecode;
- 	return (1);
- }
- #endif /* THUNDER_SUPPORT */
diff --git a/source/l/libtiff/libtiff-CVE-2012-1173.patch b/source/l/libtiff/libtiff-CVE-2012-1173.patch
new file mode 100644
index 00000000..0ada700b
--- /dev/null
+++ b/source/l/libtiff/libtiff-CVE-2012-1173.patch
@@ -0,0 +1,71 @@
+This patch is submitted to upstream for CVE-2012-1173
+
+
+diff -Naur tiff-3.9.5.orig/libtiff/tif_getimage.c tiff-3.9.5/libtiff/tif_getimage.c
+--- tiff-3.9.5.orig/libtiff/tif_getimage.c	2010-07-08 12:17:59.000000000 -0400
++++ tiff-3.9.5/libtiff/tif_getimage.c	2012-03-14 14:49:25.796728783 -0400
+@@ -673,18 +673,24 @@
+ 	unsigned char* p2;
+ 	unsigned char* pa;
+ 	tsize_t tilesize;
++	tsize_t bufsize;
+ 	int32 fromskew, toskew;
+ 	int alpha = img->alpha;
+ 	uint32 nrow;
+ 	int ret = 1, flip;
+ 
+ 	tilesize = TIFFTileSize(tif);
+-	buf = (unsigned char*) _TIFFmalloc((alpha?4:3)*tilesize);
++	bufsize = TIFFSafeMultiply(tsize_t,alpha?4:3,tilesize);
++	if (bufsize == 0) {
++		TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "Integer overflow in %s", "gtTileSeparate");
++		return (0);
++	}
++	buf = (unsigned char*) _TIFFmalloc(bufsize);
+ 	if (buf == 0) {
+ 		TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "No space for tile buffer");
+ 		return (0);
+ 	}
+-	_TIFFmemset(buf, 0, (alpha?4:3)*tilesize);
++	_TIFFmemset(buf, 0, bufsize);
+ 	p0 = buf;
+ 	p1 = p0 + tilesize;
+ 	p2 = p1 + tilesize;
+@@ -880,17 +886,23 @@
+ 	uint32 rowsperstrip, offset_row;
+ 	uint32 imagewidth = img->width;
+ 	tsize_t stripsize;
++	tsize_t bufsize;
+ 	int32 fromskew, toskew;
+ 	int alpha = img->alpha;
+ 	int ret = 1, flip;
+ 
+ 	stripsize = TIFFStripSize(tif);
+-	p0 = buf = (unsigned char *)_TIFFmalloc((alpha?4:3)*stripsize);
++	bufsize = TIFFSafeMultiply(tsize_t,alpha?4:3,stripsize);
++	if (bufsize == 0) {
++		TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "Integer overflow in %s", "gtStripSeparate");
++		return (0);
++	}
++	p0 = buf = (unsigned char *)_TIFFmalloc(bufsize);
+ 	if (buf == 0) {
+ 		TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "No space for tile buffer");
+ 		return (0);
+ 	}
+-	_TIFFmemset(buf, 0, (alpha?4:3)*stripsize);
++	_TIFFmemset(buf, 0, bufsize);
+ 	p1 = p0 + stripsize;
+ 	p2 = p1 + stripsize;
+ 	pa = (alpha?(p2+stripsize):NULL);
+diff -Naur tiff-3.9.5.orig/libtiff/tiffiop.h tiff-3.9.5/libtiff/tiffiop.h
+--- tiff-3.9.5.orig/libtiff/tiffiop.h	2011-03-28 09:43:43.000000000 -0400
++++ tiff-3.9.5/libtiff/tiffiop.h	2012-03-14 14:49:25.797728754 -0400
+@@ -246,7 +246,7 @@
+ #define	TIFFroundup(x, y) (TIFFhowmany(x,y)*(y))
+ 
+ /* Safe multiply which returns zero if there is an integer overflow */
+-#define TIFFSafeMultiply(t,v,m) ((((t)m != (t)0) && (((t)((v*m)/m)) == (t)v)) ? (t)(v*m) : (t)0)
++#define TIFFSafeMultiply(t,v,m) ((((t)(m) != (t)0) && (((t)(((v)*(m))/(m))) == (t)(v))) ? (t)((v)*(m)) : (t)0)
+ 
+ #define TIFFmax(A,B) ((A)>(B)?(A):(B))
+ #define TIFFmin(A,B) ((A)<(B)?(A):(B))
diff --git a/source/l/libtiff/libtiff.SlackBuild b/source/l/libtiff/libtiff.SlackBuild
index 33e871f3..91ec64fa 100755
--- a/source/l/libtiff/libtiff.SlackBuild
+++ b/source/l/libtiff/libtiff.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=${VERSION:-$(echo tiff-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=2
+BUILD=1
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -63,8 +63,7 @@ rm -rf tiff-$VERSION
 tar xvf $CWD/tiff-$VERSION.tar.?z* || exit 1
 cd tiff-$VERSION
 
-zcat $CWD/libtiff-CVE-2011-0192.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/libtiff-CVE-2011-1167.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/libtiff-CVE-2012-1173.patch.gz | patch -p1 --verbose || exit 1
 
 chown -R root:root .
 find . \
diff --git a/source/l/libusb-compat/libusb-compat.SlackBuild b/source/l/libusb-compat/libusb-compat.SlackBuild
new file mode 100755
index 00000000..f0b2c0d9
--- /dev/null
+++ b/source/l/libusb-compat/libusb-compat.SlackBuild
@@ -0,0 +1,140 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=libusb-compat
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/libusb-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING INSTALL LICENSE NEWS README \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libusb-compat/slack-desc b/source/l/libusb-compat/slack-desc
new file mode 100644
index 00000000..5db3fa74
--- /dev/null
+++ b/source/l/libusb-compat/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+libusb-compat: libusb-compat (Compatibility library for libusb-0.1 apps)
+libusb-compat:
+libusb-compat: A compatibility layer allowing applications written for libusb-0.1 to
+libusb-compat: work with libusb-1.0.  libusb-compat-0.1 attempts to retain as much
+libusb-compat: ABI and API compatibility with libusb-0.1 as possible.
+libusb-compat:
+libusb-compat: Homepage:  http://libusb.org
+libusb-compat:
+libusb-compat:
+libusb-compat:
+libusb-compat:
diff --git a/source/l/libusb/libusb.SlackBuild b/source/l/libusb/libusb.SlackBuild
index 26bc4b5d..64b32c3d 100755
--- a/source/l/libusb/libusb.SlackBuild
+++ b/source/l/libusb/libusb.SlackBuild
@@ -21,10 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-1.0.8}	# libusb version
-USBCOMPAT=${USBCOMPAT:-0.1.3}	# libusb-compat version
+VERSION=${VERSION:-1.0.9}	# libusb version
 
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j6}
 
@@ -60,11 +59,9 @@ mkdir -p $TMP $PKG
 # First we'll do the main libusb stuff
 cd $TMP
 rm -rf libusb-$VERSION
-tar xvf $CWD/libusb-$VERSION.tar.bz2
+tar xvf $CWD/libusb-$VERSION.tar.xz
 cd libusb-$VERSION
 
-zcat $CWD/libusb.fix.debug.log.level.diff.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -101,43 +98,6 @@ if [ -r ChangeLog ]; then
   touch -r ChangeLog $DOCSDIR/ChangeLog
 fi
 
-# Now build the libusb-compat stuff
-cd $TMP
-rm -rf libusb-compat-$USBCOMPAT
-tar xvf $CWD/libusb-compat-$USBCOMPAT.tar.bz2
-cd libusb-compat-$USBCOMPAT
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/libusb-$VERSION \
-  --disable-static \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG
-
-mkdir -p $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT
-cp -a \
-  AUTHORS COPYING INSTALL LICENSE NEWS README \
-  $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/libusb-compat-$USBCOMPAT)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
 # Now handle the package-wide stuff
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/l/libusb/libusb.fix.debug.log.level.diff b/source/l/libusb/libusb.fix.debug.log.level.diff
deleted file mode 100644
index 59af816e..00000000
--- a/source/l/libusb/libusb.fix.debug.log.level.diff
+++ /dev/null
@@ -1,12 +0,0 @@
---- ./libusb/os/linux_usbfs.c.orig	2010-04-22 16:14:46.000000000 -0500
-+++ ./libusb/os/linux_usbfs.c	2011-03-24 18:40:38.000000000 -0500
-@@ -1055,7 +1055,8 @@
- 	hpriv->fd = open(filename, O_RDWR);
- 	if (hpriv->fd < 0) {
- 		if (errno == EACCES) {
--			fprintf(stderr, "libusb couldn't open USB device %s: "
-+                        usbi_err(HANDLE_CTX(handle),
-+			        "libusb couldn't open USB device %s: "
- 				"Permission denied.\n"
- 				"libusb requires write access to USB device nodes.\n",
- 				filename);
diff --git a/source/l/libusb/slack-desc b/source/l/libusb/slack-desc
index e1a8b5df..68090cf6 100644
--- a/source/l/libusb/slack-desc
+++ b/source/l/libusb/slack-desc
@@ -9,11 +9,11 @@
 libusb: libusb (USB library)
 libusb:
 libusb: This is libusb, a library which allows userspace application access
-libusb: to USB devices.  It is used to connect to USB devices like scanners.
-libusb: http://libusb.org/wiki/Libusb1.0
+libusb: to USB devices.  It is used to connect to USB devices like scanners
+libusb: and printers.
+libusb:
+libusb: http://libusb.org
 libusb:
-libusb: This package also contains libusb-compat for the "old" libusb users.
-libusb: http://libusb.org/wiki/LibusbCompat0.1
 libusb:
 libusb:
 libusb:
diff --git a/source/l/libvisual/libvisual.SlackBuild b/source/l/libvisual/libvisual.SlackBuild
index c99d5461..0d749cdf 100755
--- a/source/l/libvisual/libvisual.SlackBuild
+++ b/source/l/libvisual/libvisual.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=libvisual
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -62,6 +62,8 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION
 
+zcat $CWD/libvisual.glib.h.diff.gz | patch -p1 --verbose || exit 1
+
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
diff --git a/source/l/libvisual/libvisual.glib.h.diff b/source/l/libvisual/libvisual.glib.h.diff
new file mode 100644
index 00000000..d0c738aa
--- /dev/null
+++ b/source/l/libvisual/libvisual.glib.h.diff
@@ -0,0 +1,11 @@
+--- ./libvisual/lv_thread.h.orig	2005-09-18 17:14:47.000000000 -0500
++++ ./libvisual/lv_thread.h	2012-07-17 23:05:48.818091848 -0500
+@@ -14,7 +14,7 @@
+ #ifdef VISUAL_THREAD_MODEL_POSIX
+ #include <pthread.h>
+ #elif defined(VISUAL_THREAD_MODEL_GTHREAD2) /* !VISUAL_THREAD_MODEL_POSIX */
+-#include <glib/gthread.h>
++#include <glib.h>
+ #else /* !VISUAL_THREAD_MODEL_GTHREAD2 */
+ 
+ #endif
diff --git a/source/l/libvncserver/libvncserver.SlackBuild b/source/l/libvncserver/libvncserver.SlackBuild
index 87712a13..7edc93fc 100755
--- a/source/l/libvncserver/libvncserver.SlackBuild
+++ b/source/l/libvncserver/libvncserver.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,27 +22,26 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 # Modified by Robby Workman <rworkman at slackware.com>
+# Modified by Eric Hameleers <alien at slackware.com>
 
 
-VERSION=0.9.7
+VERSION=0.9.9
 BUILD=${BUILD:-2}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-libvncserver
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -52,11 +51,23 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-libvncserver
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -79,14 +90,14 @@ CXXFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --disable-static \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Add SDLvncviewer
-#install -D -m0755 ./client_examples/SDLvncviewer $PKG/usr/bin/SDLvncviewer
-make install -C client_examples DESTDIR=$PKG || exit 1
+if [ -x client_examples/.libs/SDLvncviewer ]; then
+  cp -a client_examples/.libs/SDLvncviewer $PKG/usr/bin/SDLvncviewer
+fi
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/l/libvorbis/libvorbis.SlackBuild b/source/l/libvorbis/libvorbis.SlackBuild
index 9fae85d6..be555875 100755
--- a/source/l/libvorbis/libvorbis.SlackBuild
+++ b/source/l/libvorbis/libvorbis.SlackBuild
@@ -86,6 +86,14 @@ cp -a \
   AUTHORS COPYING HACKING README \
   $PKG/usr/doc/libvorbis-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/libwnck/libwnck.SlackBuild b/source/l/libwnck/libwnck.SlackBuild
index fba40293..bcaed3c6 100755
--- a/source/l/libwnck/libwnck.SlackBuild
+++ b/source/l/libwnck/libwnck.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=libwnck
 VERSION=${VERSION:-$(echo libwnck-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/l/libwpd/libwpd.SlackBuild b/source/l/libwpd/libwpd.SlackBuild
index b160bd81..6b661162 100755
--- a/source/l/libwpd/libwpd.SlackBuild
+++ b/source/l/libwpd/libwpd.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=0.8.14
+VERSION=${VERSION:-$(echo libwpd-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -58,7 +58,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf libwpd-$VERSION
-tar xvf $CWD/libwpd-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/libwpd-$VERSION.tar.?z* || exit 1
 cd libwpd-$VERSION
 chown -R root:root .
 find . \
@@ -72,6 +72,7 @@ CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --without-docs \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -85,9 +86,8 @@ cp -a \
   CHANGES COPYING CREDITS HACKING INSTALL README TODO \
   $PKG/usr/doc/libwpd-$VERSION
 
-# Developers may find these docs in the source interesting, but most users won't:
-rm -rf $PKG/usr/share/doc
-rmdir $PKG/usr/share
+# Remove empty folder:
+rm -rf $PKG/usr/share
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/l/libxml2/libxml2-2.7.8.broken.versioning.diff b/source/l/libxml2/libxml2-2.7.8.broken.versioning.diff
deleted file mode 100644
index c629d21a..00000000
--- a/source/l/libxml2/libxml2-2.7.8.broken.versioning.diff
+++ /dev/null
@@ -1,23 +0,0 @@
-From 00819877651b87842ed878898ba17dba489820f0 Mon Sep 17 00:00:00 2001
-From: Daniel Veillard <veillard@redhat.com>
-Date: Thu, 04 Nov 2010 20:53:14 +0000
-Subject: Reactivate the shared library versionning script
-
----
-diff --git a/configure.in b/configure.in
-index 59d0629..a1d2c89 100644
---- a/configure.in
-+++ b/configure.in
-@@ -84,7 +84,7 @@ else
-   esac
- fi
- AC_SUBST(VERSION_SCRIPT_FLAGS)
--AM_CONDITIONAL([USE_VERSION_SCRIPT], [test -z "$VERSION_SCRIPT_FLAGS"])
-+AM_CONDITIONAL([USE_VERSION_SCRIPT], [test -n "$VERSION_SCRIPT_FLAGS"])
-
- dnl
- dnl We process the AC_ARG_WITH first so that later we can modify
---
-cgit v0.8.3.1
-
-
diff --git a/source/l/libxml2/libxml2.SlackBuild b/source/l/libxml2/libxml2.SlackBuild
index 23cce062..bd1b759a 100755
--- a/source/l/libxml2/libxml2.SlackBuild
+++ b/source/l/libxml2/libxml2.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=libxml2
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -68,10 +68,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-zcat $CWD/libxml2-2.7.8.broken.versioning.diff.gz | patch -p1 --verbose || exit 1
-# This is needed after the patch above:
-autoreconf || exit 1
-
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -104,8 +100,8 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 # Be sure to clobber any .pyc files that might have been generated so that
 # the new .py files will be used instead of the already compiled copies
 cat << EOF > $PKG/install/doinst.sh
-rm -f /usr/lib${LIBDIRSUFFIX}/python26/site-packages/libxml2.pyc
-rm -f /usr/lib${LIBDIRSUFFIX}/python26/site-packages/drv_libxml2.pyc
+rm -f /usr/lib${LIBDIRSUFFIX}/python2.7/site-packages/libxml2.pyc
+rm -f /usr/lib${LIBDIRSUFFIX}/python2.7/site-packages/drv_libxml2.pyc
 EOF
 
 cd $PKG
diff --git a/source/l/libxslt/libxslt.SlackBuild b/source/l/libxslt/libxslt.SlackBuild
index 225c4093..a365744e 100755
--- a/source/l/libxslt/libxslt.SlackBuild
+++ b/source/l/libxslt/libxslt.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=1.1.26
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libyaml/libyaml.SlackBuild b/source/l/libyaml/libyaml.SlackBuild
new file mode 100755
index 00000000..4dad39be
--- /dev/null
+++ b/source/l/libyaml/libyaml.SlackBuild
@@ -0,0 +1,114 @@
+#!/bin/sh
+
+# Copyright 2011  Vincent Batts, Vienna, VA, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=libyaml
+SRCNAM=yaml
+VERSION=$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  README LICENSE doc \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+#cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/libyaml/libyaml.url b/source/l/libyaml/libyaml.url
new file mode 100644
index 00000000..0ee34d3f
--- /dev/null
+++ b/source/l/libyaml/libyaml.url
@@ -0,0 +1 @@
+http://pyyaml.org/wiki/LibYAML
diff --git a/source/l/libyaml/slack-desc b/source/l/libyaml/slack-desc
new file mode 100644
index 00000000..8965634d
--- /dev/null
+++ b/source/l/libyaml/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+libyaml: libyaml (YAML parser, written in C)
+libyaml:
+libyaml: YAML Ain't Markup Language. It is a human friendly data serialization 
+libyaml: standard for all programming languages.
+libyaml:
+libyaml: Homepage: http://pyyaml.org/wiki/LibYAML
+libyaml:
+libyaml:
+libyaml:
+libyaml:
+libyaml:
diff --git a/source/l/loudmouth/loudmouth-1.4.3-glib-compile-fix.patch b/source/l/loudmouth/loudmouth-1.4.3-glib-compile-fix.patch
new file mode 100644
index 00000000..03d04e78
--- /dev/null
+++ b/source/l/loudmouth/loudmouth-1.4.3-glib-compile-fix.patch
@@ -0,0 +1,17 @@
+Fix compile against new glib.
+
+From: Daniel Drake <dsd@laptop.org>
+
+Index: loudmouth-1.4.3/loudmouth/lm-error.c
+===================================================================
+--- loudmouth-1.4.3.orig/loudmouth/lm-error.c
++++ loudmouth-1.4.3/loudmouth/lm-error.c
+@@ -19,7 +19,7 @@
+  */
+ 
+ #include <config.h>
+-#include <glib/gerror.h>
++#include <glib.h>
+ #include "lm-error.h"
+ 
+ /**
diff --git a/source/l/loudmouth/loudmouth.SlackBuild b/source/l/loudmouth/loudmouth.SlackBuild
index 650bd169..156a49a9 100755
--- a/source/l/loudmouth/loudmouth.SlackBuild
+++ b/source/l/loudmouth/loudmouth.SlackBuild
@@ -1,5 +1,6 @@
 #!/bin/sh
 # Copyright 2009 Eric Hameleers, Eindhoven, NL
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -23,7 +24,7 @@
 
 PKGNAM=loudmouth
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:" -j4 "}
 
@@ -71,6 +72,7 @@ zcat $CWD/loudmouth.gnutls.configure.ac.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/loudmouth.async_assertion.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/loudmouth.sasl-md5-digest-uri.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/loudmouth.stanzadrop.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/loudmouth-1.4.3-glib-compile-fix.patch.gz | patch -p1 --verbose || exit 1
 
 # needed after the configure.ac gnutls patch
 autoreconf
@@ -94,13 +96,18 @@ LDFLAGS="$SLKLDFLAGS" \
   --mandir=/usr/man \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
   --with-ssl=gnutls \
-  --enable-debug=no \
+  --enable-debug=yes \
   --enable-static=no \
   --program-prefix= \
   --program-suffix= \
   --build=$ARCH-slackware-linux \
   --host=$ARCH-slackware-linux
 
+##
+## NOTE: For some reason --enable-debug=yes actually _disables_ verbose debug
+## messages to the console.  Don't mess with it!
+##
+
 # this generates a broken libtool, so use the system version:
 cp /usr/bin/libtool .
 
diff --git a/source/l/lzo/.lzo.info b/source/l/lzo/.lzo.info
deleted file mode 100644
index 27564cc0..00000000
--- a/source/l/lzo/.lzo.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM=lzo
-VERSION=2.0.2
-HOMEPAGE=http://www.oberhumer.com/opensource/lzo/
-DOWNLOAD=http://www.oberhumer.com/opensource/lzo/download/lzo-2.02.tar.gz
-MD5SUM=6760e5819f4238328709bf93bf10071c
-AUTHOR=Ricardson Williams
-EMAIL=ricardsonwilliams@yahoo.com.br
-APPROVED=Alan Hicks,robw810
diff --git a/source/l/media-player-info/media-player-info.SlackBuild b/source/l/media-player-info/media-player-info.SlackBuild
new file mode 100755
index 00000000..eff9d193
--- /dev/null
+++ b/source/l/media-player-info/media-player-info.SlackBuild
@@ -0,0 +1,80 @@
+#!/bin/sh
+
+# Slackware build script for media-player-info
+
+# Copyright 2010-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=media-player-info
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+ARCH=noarch
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.txz
diff --git a/source/l/media-player-info/slack-desc b/source/l/media-player-info/slack-desc
new file mode 100644
index 00000000..509b51be
--- /dev/null
+++ b/source/l/media-player-info/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+media-player-info: media-player-info (media player capability data)
+media-player-info:
+media-player-info: media-player-info is a repository of data files describing media 
+media-player-info: player (mostly USB Mass Storage ones) capabilities.  These files 
+media-player-info: contain information about the directory layout to use to add music 
+media-player-info: to these devices, about the supported file formats,
+media-player-info:
+media-player-info:
+media-player-info:
+media-player-info:
+media-player-info:
diff --git a/source/l/mozilla-nss/MPL-1.1.txt b/source/l/mozilla-nss/MPL-1.1.txt
new file mode 100644
index 00000000..7714141d
--- /dev/null
+++ b/source/l/mozilla-nss/MPL-1.1.txt
@@ -0,0 +1,470 @@
+                          MOZILLA PUBLIC LICENSE
+                                Version 1.1
+
+                              ---------------
+
+1. Definitions.
+
+     1.0.1. "Commercial Use" means distribution or otherwise making the
+     Covered Code available to a third party.
+
+     1.1. "Contributor" means each entity that creates or contributes to
+     the creation of Modifications.
+
+     1.2. "Contributor Version" means the combination of the Original
+     Code, prior Modifications used by a Contributor, and the Modifications
+     made by that particular Contributor.
+
+     1.3. "Covered Code" means the Original Code or Modifications or the
+     combination of the Original Code and Modifications, in each case
+     including portions thereof.
+
+     1.4. "Electronic Distribution Mechanism" means a mechanism generally
+     accepted in the software development community for the electronic
+     transfer of data.
+
+     1.5. "Executable" means Covered Code in any form other than Source
+     Code.
+
+     1.6. "Initial Developer" means the individual or entity identified
+     as the Initial Developer in the Source Code notice required by Exhibit
+     A.
+
+     1.7. "Larger Work" means a work which combines Covered Code or
+     portions thereof with code not governed by the terms of this License.
+
+     1.8. "License" means this document.
+
+     1.8.1. "Licensable" means having the right to grant, to the maximum
+     extent possible, whether at the time of the initial grant or
+     subsequently acquired, any and all of the rights conveyed herein.
+
+     1.9. "Modifications" means any addition to or deletion from the
+     substance or structure of either the Original Code or any previous
+     Modifications. When Covered Code is released as a series of files, a
+     Modification is:
+          A. Any addition to or deletion from the contents of a file
+          containing Original Code or previous Modifications.
+
+          B. Any new file that contains any part of the Original Code or
+          previous Modifications.
+
+     1.10. "Original Code" means Source Code of computer software code
+     which is described in the Source Code notice required by Exhibit A as
+     Original Code, and which, at the time of its release under this
+     License is not already Covered Code governed by this License.
+
+     1.10.1. "Patent Claims" means any patent claim(s), now owned or
+     hereafter acquired, including without limitation,  method, process,
+     and apparatus claims, in any patent Licensable by grantor.
+
+     1.11. "Source Code" means the preferred form of the Covered Code for
+     making modifications to it, including all modules it contains, plus
+     any associated interface definition files, scripts used to control
+     compilation and installation of an Executable, or source code
+     differential comparisons against either the Original Code or another
+     well known, available Covered Code of the Contributor's choice. The
+     Source Code can be in a compressed or archival form, provided the
+     appropriate decompression or de-archiving software is widely available
+     for no charge.
+
+     1.12. "You" (or "Your")  means an individual or a legal entity
+     exercising rights under, and complying with all of the terms of, this
+     License or a future version of this License issued under Section 6.1.
+     For legal entities, "You" includes any entity which controls, is
+     controlled by, or is under common control with You. For purposes of
+     this definition, "control" means (a) the power, direct or indirect,
+     to cause the direction or management of such entity, whether by
+     contract or otherwise, or (b) ownership of more than fifty percent
+     (50%) of the outstanding shares or beneficial ownership of such
+     entity.
+
+2. Source Code License.
+
+     2.1. The Initial Developer Grant.
+     The Initial Developer hereby grants You a world-wide, royalty-free,
+     non-exclusive license, subject to third party intellectual property
+     claims:
+          (a)  under intellectual property rights (other than patent or
+          trademark) Licensable by Initial Developer to use, reproduce,
+          modify, display, perform, sublicense and distribute the Original
+          Code (or portions thereof) with or without Modifications, and/or
+          as part of a Larger Work; and
+
+          (b) under Patents Claims infringed by the making, using or
+          selling of Original Code, to make, have made, use, practice,
+          sell, and offer for sale, and/or otherwise dispose of the
+          Original Code (or portions thereof).
+
+          (c) the licenses granted in this Section 2.1(a) and (b) are
+          effective on the date Initial Developer first distributes
+          Original Code under the terms of this License.
+
+          (d) Notwithstanding Section 2.1(b) above, no patent license is
+          granted: 1) for code that You delete from the Original Code; 2)
+          separate from the Original Code;  or 3) for infringements caused
+          by: i) the modification of the Original Code or ii) the
+          combination of the Original Code with other software or devices.
+
+     2.2. Contributor Grant.
+     Subject to third party intellectual property claims, each Contributor
+     hereby grants You a world-wide, royalty-free, non-exclusive license
+
+          (a)  under intellectual property rights (other than patent or
+          trademark) Licensable by Contributor, to use, reproduce, modify,
+          display, perform, sublicense and distribute the Modifications
+          created by such Contributor (or portions thereof) either on an
+          unmodified basis, with other Modifications, as Covered Code
+          and/or as part of a Larger Work; and
+
+          (b) under Patent Claims infringed by the making, using, or
+          selling of  Modifications made by that Contributor either alone
+          and/or in combination with its Contributor Version (or portions
+          of such combination), to make, use, sell, offer for sale, have
+          made, and/or otherwise dispose of: 1) Modifications made by that
+          Contributor (or portions thereof); and 2) the combination of
+          Modifications made by that Contributor with its Contributor
+          Version (or portions of such combination).
+
+          (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
+          effective on the date Contributor first makes Commercial Use of
+          the Covered Code.
+
+          (d)    Notwithstanding Section 2.2(b) above, no patent license is
+          granted: 1) for any code that Contributor has deleted from the
+          Contributor Version; 2)  separate from the Contributor Version;
+          3)  for infringements caused by: i) third party modifications of
+          Contributor Version or ii)  the combination of Modifications made
+          by that Contributor with other software  (except as part of the
+          Contributor Version) or other devices; or 4) under Patent Claims
+          infringed by Covered Code in the absence of Modifications made by
+          that Contributor.
+
+3. Distribution Obligations.
+
+     3.1. Application of License.
+     The Modifications which You create or to which You contribute are
+     governed by the terms of this License, including without limitation
+     Section 2.2. The Source Code version of Covered Code may be
+     distributed only under the terms of this License or a future version
+     of this License released under Section 6.1, and You must include a
+     copy of this License with every copy of the Source Code You
+     distribute. You may not offer or impose any terms on any Source Code
+     version that alters or restricts the applicable version of this
+     License or the recipients' rights hereunder. However, You may include
+     an additional document offering the additional rights described in
+     Section 3.5.
+
+     3.2. Availability of Source Code.
+     Any Modification which You create or to which You contribute must be
+     made available in Source Code form under the terms of this License
+     either on the same media as an Executable version or via an accepted
+     Electronic Distribution Mechanism to anyone to whom you made an
+     Executable version available; and if made available via Electronic
+     Distribution Mechanism, must remain available for at least twelve (12)
+     months after the date it initially became available, or at least six
+     (6) months after a subsequent version of that particular Modification
+     has been made available to such recipients. You are responsible for
+     ensuring that the Source Code version remains available even if the
+     Electronic Distribution Mechanism is maintained by a third party.
+
+     3.3. Description of Modifications.
+     You must cause all Covered Code to which You contribute to contain a
+     file documenting the changes You made to create that Covered Code and
+     the date of any change. You must include a prominent statement that
+     the Modification is derived, directly or indirectly, from Original
+     Code provided by the Initial Developer and including the name of the
+     Initial Developer in (a) the Source Code, and (b) in any notice in an
+     Executable version or related documentation in which You describe the
+     origin or ownership of the Covered Code.
+
+     3.4. Intellectual Property Matters
+          (a) Third Party Claims.
+          If Contributor has knowledge that a license under a third party's
+          intellectual property rights is required to exercise the rights
+          granted by such Contributor under Sections 2.1 or 2.2,
+          Contributor must include a text file with the Source Code
+          distribution titled "LEGAL" which describes the claim and the
+          party making the claim in sufficient detail that a recipient will
+          know whom to contact. If Contributor obtains such knowledge after
+          the Modification is made available as described in Section 3.2,
+          Contributor shall promptly modify the LEGAL file in all copies
+          Contributor makes available thereafter and shall take other steps
+          (such as notifying appropriate mailing lists or newsgroups)
+          reasonably calculated to inform those who received the Covered
+          Code that new knowledge has been obtained.
+
+          (b) Contributor APIs.
+          If Contributor's Modifications include an application programming
+          interface and Contributor has knowledge of patent licenses which
+          are reasonably necessary to implement that API, Contributor must
+          also include this information in the LEGAL file.
+
+               (c)    Representations.
+          Contributor represents that, except as disclosed pursuant to
+          Section 3.4(a) above, Contributor believes that Contributor's
+          Modifications are Contributor's original creation(s) and/or
+          Contributor has sufficient rights to grant the rights conveyed by
+          this License.
+
+     3.5. Required Notices.
+     You must duplicate the notice in Exhibit A in each file of the Source
+     Code.  If it is not possible to put such notice in a particular Source
+     Code file due to its structure, then You must include such notice in a
+     location (such as a relevant directory) where a user would be likely
+     to look for such a notice.  If You created one or more Modification(s)
+     You may add your name as a Contributor to the notice described in
+     Exhibit A.  You must also duplicate this License in any documentation
+     for the Source Code where You describe recipients' rights or ownership
+     rights relating to Covered Code.  You may choose to offer, and to
+     charge a fee for, warranty, support, indemnity or liability
+     obligations to one or more recipients of Covered Code. However, You
+     may do so only on Your own behalf, and not on behalf of the Initial
+     Developer or any Contributor. You must make it absolutely clear than
+     any such warranty, support, indemnity or liability obligation is
+     offered by You alone, and You hereby agree to indemnify the Initial
+     Developer and every Contributor for any liability incurred by the
+     Initial Developer or such Contributor as a result of warranty,
+     support, indemnity or liability terms You offer.
+
+     3.6. Distribution of Executable Versions.
+     You may distribute Covered Code in Executable form only if the
+     requirements of Section 3.1-3.5 have been met for that Covered Code,
+     and if You include a notice stating that the Source Code version of
+     the Covered Code is available under the terms of this License,
+     including a description of how and where You have fulfilled the
+     obligations of Section 3.2. The notice must be conspicuously included
+     in any notice in an Executable version, related documentation or
+     collateral in which You describe recipients' rights relating to the
+     Covered Code. You may distribute the Executable version of Covered
+     Code or ownership rights under a license of Your choice, which may
+     contain terms different from this License, provided that You are in
+     compliance with the terms of this License and that the license for the
+     Executable version does not attempt to limit or alter the recipient's
+     rights in the Source Code version from the rights set forth in this
+     License. If You distribute the Executable version under a different
+     license You must make it absolutely clear that any terms which differ
+     from this License are offered by You alone, not by the Initial
+     Developer or any Contributor. You hereby agree to indemnify the
+     Initial Developer and every Contributor for any liability incurred by
+     the Initial Developer or such Contributor as a result of any such
+     terms You offer.
+
+     3.7. Larger Works.
+     You may create a Larger Work by combining Covered Code with other code
+     not governed by the terms of this License and distribute the Larger
+     Work as a single product. In such a case, You must make sure the
+     requirements of this License are fulfilled for the Covered Code.
+
+4. Inability to Comply Due to Statute or Regulation.
+
+     If it is impossible for You to comply with any of the terms of this
+     License with respect to some or all of the Covered Code due to
+     statute, judicial order, or regulation then You must: (a) comply with
+     the terms of this License to the maximum extent possible; and (b)
+     describe the limitations and the code they affect. Such description
+     must be included in the LEGAL file described in Section 3.4 and must
+     be included with all distributions of the Source Code. Except to the
+     extent prohibited by statute or regulation, such description must be
+     sufficiently detailed for a recipient of ordinary skill to be able to
+     understand it.
+
+5. Application of this License.
+
+     This License applies to code to which the Initial Developer has
+     attached the notice in Exhibit A and to related Covered Code.
+
+6. Versions of the License.
+
+     6.1. New Versions.
+     Netscape Communications Corporation ("Netscape") may publish revised
+     and/or new versions of the License from time to time. Each version
+     will be given a distinguishing version number.
+
+     6.2. Effect of New Versions.
+     Once Covered Code has been published under a particular version of the
+     License, You may always continue to use it under the terms of that
+     version. You may also choose to use such Covered Code under the terms
+     of any subsequent version of the License published by Netscape. No one
+     other than Netscape has the right to modify the terms applicable to
+     Covered Code created under this License.
+
+     6.3. Derivative Works.
+     If You create or use a modified version of this License (which you may
+     only do in order to apply it to code which is not already Covered Code
+     governed by this License), You must (a) rename Your license so that
+     the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
+     "MPL", "NPL" or any confusingly similar phrase do not appear in your
+     license (except to note that your license differs from this License)
+     and (b) otherwise make it clear that Your version of the license
+     contains terms which differ from the Mozilla Public License and
+     Netscape Public License. (Filling in the name of the Initial
+     Developer, Original Code or Contributor in the notice described in
+     Exhibit A shall not of themselves be deemed to be modifications of
+     this License.)
+
+7. DISCLAIMER OF WARRANTY.
+
+     COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
+     WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+     WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
+     DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
+     THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
+     IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
+     YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
+     COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
+     OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
+     ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
+
+8. TERMINATION.
+
+     8.1.  This License and the rights granted hereunder will terminate
+     automatically if You fail to comply with terms herein and fail to cure
+     such breach within 30 days of becoming aware of the breach. All
+     sublicenses to the Covered Code which are properly granted shall
+     survive any termination of this License. Provisions which, by their
+     nature, must remain in effect beyond the termination of this License
+     shall survive.
+
+     8.2.  If You initiate litigation by asserting a patent infringement
+     claim (excluding declatory judgment actions) against Initial Developer
+     or a Contributor (the Initial Developer or Contributor against whom
+     You file such action is referred to as "Participant")  alleging that:
+
+     (a)  such Participant's Contributor Version directly or indirectly
+     infringes any patent, then any and all rights granted by such
+     Participant to You under Sections 2.1 and/or 2.2 of this License
+     shall, upon 60 days notice from Participant terminate prospectively,
+     unless if within 60 days after receipt of notice You either: (i)
+     agree in writing to pay Participant a mutually agreeable reasonable
+     royalty for Your past and future use of Modifications made by such
+     Participant, or (ii) withdraw Your litigation claim with respect to
+     the Contributor Version against such Participant.  If within 60 days
+     of notice, a reasonable royalty and payment arrangement are not
+     mutually agreed upon in writing by the parties or the litigation claim
+     is not withdrawn, the rights granted by Participant to You under
+     Sections 2.1 and/or 2.2 automatically terminate at the expiration of
+     the 60 day notice period specified above.
+
+     (b)  any software, hardware, or device, other than such Participant's
+     Contributor Version, directly or indirectly infringes any patent, then
+     any rights granted to You by such Participant under Sections 2.1(b)
+     and 2.2(b) are revoked effective as of the date You first made, used,
+     sold, distributed, or had made, Modifications made by that
+     Participant.
+
+     8.3.  If You assert a patent infringement claim against Participant
+     alleging that such Participant's Contributor Version directly or
+     indirectly infringes any patent where such claim is resolved (such as
+     by license or settlement) prior to the initiation of patent
+     infringement litigation, then the reasonable value of the licenses
+     granted by such Participant under Sections 2.1 or 2.2 shall be taken
+     into account in determining the amount or value of any payment or
+     license.
+
+     8.4.  In the event of termination under Sections 8.1 or 8.2 above,
+     all end user license agreements (excluding distributors and resellers)
+     which have been validly granted by You or any distributor hereunder
+     prior to termination shall survive termination.
+
+9. LIMITATION OF LIABILITY.
+
+     UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
+     (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
+     DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
+     OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
+     ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
+     CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
+     WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
+     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
+     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
+     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
+     RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
+     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
+     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
+     THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
+
+10. U.S. GOVERNMENT END USERS.
+
+     The Covered Code is a "commercial item," as that term is defined in
+     48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
+     software" and "commercial computer software documentation," as such
+     terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
+     C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
+     all U.S. Government End Users acquire Covered Code with only those
+     rights set forth herein.
+
+11. MISCELLANEOUS.
+
+     This License represents the complete agreement concerning subject
+     matter hereof. If any provision of this License is held to be
+     unenforceable, such provision shall be reformed only to the extent
+     necessary to make it enforceable. This License shall be governed by
+     California law provisions (except to the extent applicable law, if
+     any, provides otherwise), excluding its conflict-of-law provisions.
+     With respect to disputes in which at least one party is a citizen of,
+     or an entity chartered or registered to do business in the United
+     States of America, any litigation relating to this License shall be
+     subject to the jurisdiction of the Federal Courts of the Northern
+     District of California, with venue lying in Santa Clara County,
+     California, with the losing party responsible for costs, including
+     without limitation, court costs and reasonable attorneys' fees and
+     expenses. The application of the United Nations Convention on
+     Contracts for the International Sale of Goods is expressly excluded.
+     Any law or regulation which provides that the language of a contract
+     shall be construed against the drafter shall not apply to this
+     License.
+
+12. RESPONSIBILITY FOR CLAIMS.
+
+     As between Initial Developer and the Contributors, each party is
+     responsible for claims and damages arising, directly or indirectly,
+     out of its utilization of rights under this License and You agree to
+     work with Initial Developer and Contributors to distribute such
+     responsibility on an equitable basis. Nothing herein is intended or
+     shall be deemed to constitute any admission of liability.
+
+13. MULTIPLE-LICENSED CODE.
+
+     Initial Developer may designate portions of the Covered Code as
+     "Multiple-Licensed".  "Multiple-Licensed" means that the Initial
+     Developer permits you to utilize portions of the Covered Code under
+     Your choice of the NPL or the alternative licenses, if any, specified
+     by the Initial Developer in the file described in Exhibit A.
+
+EXHIBIT A -Mozilla Public License.
+
+     ``The contents of this file are subject to the Mozilla Public License
+     Version 1.1 (the "License"); you may not use this file except in
+     compliance with the License. You may obtain a copy of the License at
+     http://www.mozilla.org/MPL/
+
+     Software distributed under the License is distributed on an "AS IS"
+     basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+     License for the specific language governing rights and limitations
+     under the License.
+
+     The Original Code is ______________________________________.
+
+     The Initial Developer of the Original Code is ________________________.
+     Portions created by ______________________ are Copyright (C) ______
+     _______________________. All Rights Reserved.
+
+     Contributor(s): ______________________________________.
+
+     Alternatively, the contents of this file may be used under the terms
+     of the _____ license (the  "[___] License"), in which case the
+     provisions of [______] License are applicable instead of those
+     above.  If you wish to allow use of your version of this file only
+     under the terms of the [____] License and not to allow others to use
+     your version of this file under the MPL, indicate your decision by
+     deleting  the provisions above and replace  them with the notice and
+     other provisions required by the [___] License.  If you do not delete
+     the provisions above, a recipient may use your version of this file
+     under either the MPL or the [___] License."
+
+     [NOTE: The text of this Exhibit A may differ slightly from the text of
+     the notices in the Source Code files of the Original Code. You should
+     use the text of this Exhibit A rather than the text found in the
+     Original Code Source Code for Your Modifications.]
+
diff --git a/source/l/mozilla-nss/faq.html b/source/l/mozilla-nss/faq.html
new file mode 100644
index 00000000..176fe8f8
--- /dev/null
+++ b/source/l/mozilla-nss/faq.html
@@ -0,0 +1,364 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<link rel="top" title="Home" href="http://www.mozilla.org/">
+<link rel="stylesheet" type="text/css" href="../../../../css/print.css"  media="print">
+<link rel="stylesheet" type="text/css" href="../../../../css/base/content.css"  media="all">
+<link rel="stylesheet" type="text/css" href="../../../../css/cavendish/content.css" title="Cavendish" media="screen">
+<link rel="stylesheet" type="text/css" href="../../../../css/base/template.css"  media="screen">
+<link rel="stylesheet" type="text/css" href="../../../../css/cavendish/template.css" title="Cavendish" media="screen">
+<link rel="icon" href="../../../../images/mozilla-16.png" type="image/png">
+
+<TITLE>NSS FAQ</TITLE>
+<script src="../../../../__utm.js" type="text/javascript"></script>
+</head>
+<body id="www-mozilla-org" class="secondLevel sectionDevelopers">
+<div id="container">
+<p class="skipLink"><a href="#mainContent" accesskey="2">Skip to main content</a></p>
+<div id="header">
+<h1><a href="/" title="Return to home page" accesskey="1">Mozilla</a></h1>
+<ul>
+<li id="menu_aboutus"><a href="../../../../about/" title="Learn more about Mozilla">About</a></li>
+<li id="menu_foundation"><a href="../../../../foundation/" title="Information about the non-profit Mozilla Foundation">Foundation</a></li>
+<li id="menu_contribute"><a href="../../../../contribute/" title="Find out how to get involved with Mozilla">Contribute</a></li>
+<li id="menu_community"><a href="../../../../community/" title="List of community sites and other resources">Community</a></li>
+<li id="menu_developers"><a href="../../../../developer/" title="Resources and links for developers">Developers</a></li>
+<li id="menu_projects"><a href="../../../../projects/" title="Projects being created by the Mozilla community">Projects</a></li>
+</ul>
+<form id="searchbox_002443141534113389537:ysdmevkkknw" action="http://www.google.com/cse" title="mozilla.org Search">
+<div>
+<label for="q" title="Search mozilla.org's sites">search mozilla:</label>
+<input type="hidden" name="cx" value="002443141534113389537:ysdmevkkknw">
+<input type="hidden" name="cof" value="FORID:0">
+<input type="text" id="q" name="q" accesskey="s" size="30">
+<input type="submit" id="submit" value="Go">
+</div>
+</form>
+</div>
+<hr class="hide">
+<div id="mBody">
+<div id="side">
+
+<ul id="nav">
+<li><a title="Roadmap" href="../../../../roadmap.html"><strong> Roadmap</strong></a></li>
+<li><a title="Projects" href="../../../../projects/"><strong> Projects</strong></a></li>
+<li><a title="For developers" href="../../../../developer/"><strong> Coding</strong></a>
+<ul>
+<li><a title="Module Owners" href="../../../../owners.html"> Module Owners</a></li>
+<li><a title="Hacking" href="../../../../hacking/"> Hacking</a></li>
+<li><a title="Get the Source" href="http://developer.mozilla.org/en/docs/Download_Mozilla_Source_Code"> Get the Source</a></li>
+<li><a title="Building Mozilla" href="http://developer.mozilla.org/en/docs/Build_Documentation"> Build It</a></li>
+</ul>
+</li>
+<li><a title="Testing" href="http://quality.mozilla.org/"><strong> Testing</strong></a>
+<ul>
+<li><a title="Downloads of mozilla.org software releases" href="../../../../download.html"> Releases</a></li>
+<li><a title="Latest mozilla builds for testers" href="../../../../developer/#builds"> Nightly Builds</a></li>
+<li><a title="For testers to report bugs" href="https://bugzilla.mozilla.org/"> Report A Problem</a></li>
+</ul>
+</li>
+<li><a title="Tools for mozilla developers" href="../../../../tools.html"><strong> Tools</strong></a>
+<ul>
+<li><a title="Bug tracking system for mozilla testers." href="https://bugzilla.mozilla.org/"> Bugzilla</a></li>
+<li><a title="Latest status of mozilla builds" href="http://tinderbox.mozilla.org/showbuilds.cgi?tree=Firefox"> Tinderbox</a></li>
+<li><a title="Latest checkins" href="http://bonsai.mozilla.org/cvsqueryform.cgi"> Bonsai</a></li>
+<li><a title="Source cross reference" href="http://mxr.mozilla.org/"> MXR</a></li>
+</ul>
+</li>
+<li><a title="Frequently Asked Questions." href="../../../../faq.html"><strong> FAQs</strong></a></li>
+</ul>
+
+</div>
+<hr class="hide">
+<div id="mainContent">
+
+
+
+
+<center>
+<h2>NSS FAQ</h2>
+<i><FONT SIZE="-1">
+
+Newsgroup: 
+<A HREF="news://news.mozilla.org/mozilla.dev.tech.crypto">mozilla.dev.tech.crypto</A>
+
+</FONT></i>
+</center>
+
+<p>
+<hr>
+<p>
+
+<a href="#Q1">General Questions</a>
+
+<ul>
+<li>
+<a href="#Q1.1">What is Network Security Services (NSS)?</a></li>
+<li>
+<a href="#Q1.2">What can I do with NSS? Is NSS appropriate for my application?</a></li>
+<li>
+<a href="#q1.2a">How does NSS compare to OpenSSL?</a></li>
+<li>
+<a href="#q1.3">How does NSS compare to SSLRef?</a></li>
+<li>
+<a href="#q1.4">What platforms and development environments are supported?</a></li>
+<li>
+<a href="#q1.5">What cryptography standards are supported?</a></li>
+<li>
+<a href="#q1.7">What is the relationship between NSS and PSM?</a></li>
+<li>
+<a href="#q1.7">Where can I get the source?</a></li>
+<li>
+<a href="#q1.8">How much does it cost?</a></li>
+</ul>
+
+<a href="#Q2">Developer Questions</a>
+<ul>
+<li>
+<a href="#q2.1">What hardware accelerators are supported?</a></li>
+<li>
+<a href="#q2.2">How do I integrate smart cards into my application using
+NSS?</a></li>
+<li>
+<a href="#q2.3">How is NSS compatible with other Netscape products?</a></li>
+<li>
+<a href="#q2.4">Does NSS require Netscape Portable Runtime (NSPR)?</a></li>
+<li>
+<a href="#q2.5">Can I use NSS even if my application protocol isn't HTTP?</a></li>
+<li>
+<a href="#q2.6">How long does it take to integrate NSS into my application?</a></li>
+<li>
+<a href="#q2.6">How can I learn more about SSL?</a></li>
+</ul>
+
+<a href="#Q3">Licensing Questions</a>
+<ul>
+<li>
+<a href="#q3.1">How is NSS licensed?</a>
+<li>
+<a href="#q3.2">Is NSS available outside the United States?</a></li>
+</ul>
+<h2>
+ <a NAME="Q1"><hr WIDTH="100%"></a>General Questions</h2>
+<a NAME="Q1.1"></a><H4>What is Network Security Services (NSS)?</h4>
+<P>NSS is set of libraries, APIs, utilities, and documentation designed 
+to support cross-platform development of security-enabled client and 
+server applications. It provides a complete open-source implementation 
+of the crypto libraries used by Netscape and other companies in the 
+Netscape 6 browser, server products from iPlanet E-Commerce Solutions, the 
+Gateway Connected Touch Pad with Instant AOL, and other products. 
+
+<p>For an
+overview of NSS, see <a href="overview.html">Overview of NSS</a>. For detailed information 
+on the open-source NSS project, see <a href="index.html">NSS Project Page</a>.
+   
+<br> 
+<a NAME="Q1.2"></a><H4>What can I do with NSS?  Is NSS appropriate for
+my application?</h4>
+<P>If you want add support for SSL, S/MIME, or other Internet security standards 
+to your application, you can use Network Security Services (NSS) to do so. Because 
+NSS provides complete support for all versions of SSL and TLS, it is particularly well-suited
+for applications that need to communicate with the many clients and servers
+that already support the SSL protocol. 
+<p>The PKCS #11 interface included in NSS means that your application can
+use <a href="#q2.1">hardware accelerators</a>  on the server and <a href="#q2.2">smart
+cards</a> for two-factor authentication.
+<br> 
+
+ <a NAME="q1.2a"></a><H4>How does NSS compare to OpenSSL?</h4>
+
+<a href="http://www.openssl.org/">OpenSSL</a> is an open source project that implements server-side SSL, 
+TLS, and a general-purpose cryptography library. It does not support PKCS #11. It is based on 
+the SSLeay library developed by Eric A. Young and Tim J. Hudson. OpenSSL is widely used in 
+Apache servers and is licensed under an Apache-style licence.
+
+<p>NSS supports both server and client applications as well as PKCS #11 and S/MIME. To permit its use 
+in as many contexts as possible, 
+NSS is triple-licensed under the <a href="../../../../MPL/">Mozilla Public License</a>, the 
+<a href="http://www.gnu.org/copyleft/gpl.html">GNU General Public License</a>,
+and the <a href="http://www.gnu.org/copyleft/lesser.html">GNU Lesser General Public License</a>. 
+You may choose to use the code either under the terms of the MPL or the GPL or the LGPL.
+
+<a NAME="q1.3"></a><H4>How does NSS compare to SSLRef?</h4>
+SSLRef was an early reference implementation of the SSL protocol. It contains 
+bugs that were never fixed, doesn't support TLS or or the 
+new 56-bit export cipher suites, and does not contain the fix to the
+Bleichenbacher attack on PKCS#1.
+
+<p>Netscape no longer maintains SSLRef or makes it available. It was built as 
+an example of an SSL implementation, not for creating production applications.
+
+<p>NSS was designed from the ground up for use by commercial developers.
+It provides a complete software development kit 
+that uses the same architecture used to support security features in many client 
+and server products from Netscape and other companies.
+
+<a NAME="q1.4"></a><H4>What platforms and development environments are supported?</h4>
+<P>iPlanet E-Commerce Solutions has certified NSS 3.1 on 18 platforms, including AIX 4.3, HP-UX 11.0, 
+Red Hat Linux 6.0, Solaris (2.6 or later), Windows NT (4.0 or later), and
+Windows 2000. Other contributors are in the process of certifying additional platforms. 
+The NSS 3.1 API requires C or C++ development environments. 
+
+<p>For the latest NSS release notes and detailed platform information, see 
+<a href="release_notes_31.html">NSS 3.1 Release Notes</a>.
+
+<a NAME="q1.5"></a><H4>What cryptography standards does NSS support?</h4>
+<P>NSS supports <a HREF="../../../docs/jargon.html#SSL">SSL v2 and v3</a>, 
+	<a HREF="../../../../docs/jargon.html#TLS">TLS</a>,
+	<a HREF="../../../../docs/jargon.html#PKCS5">PKCS #5</a>, 
+	<a HREF="../../../../docs/jargon.html#PKCS7">PKCS #7</a>,
+	<a HREF="../../../../docs/jargon.html#PKCS11">PKCS #11</a>,  
+	<a HREF="../../../../docs/jargon.html#PKCS12">PKCS #12</a>, 
+	<a HREF="../../../../docs/jargon.html#SMIME">S/MIME</a>, and 
+	<a HREF="../../../../docs/jargon.html#X.509">X.509 v3</a> certificates. 
+For complete details, 
+see <a href="nss-3.11/nss-3.11-algorithms.html">
+Encryption Technologies</a>.
+
+<a NAME="q1.6"></a><H4>What is the relationship between NSS and PSM?</H4>
+
+Personal Security Manager (PSM) is built on top of NSS. It consists of libraries 
+and a daemon designed to support cross-platform development of security-enabled 
+client applications. The PSM binary provides a client module 
+that performs cryptographic operations on behalf of applications. 
+Netscape Personal Security Manager ships with Netscape 6 and the Gateway Connected Touch Pad with Instant AOL, 
+and is also available for use with Communicagotr 4.7x. 
+
+<p>For more information about the PSM open-source project, see <a href="../psm">Personal Security Manager</a>.
+
+<a NAME="q1.7"></a><H4>Where can I get the source code?</H4>
+
+For instructions on how to check out and build the NSS 3.1 source code, see 
+<a href="buildnss_31.html">Build Instructions for NSS 3.1.</a> The source code may also 
+be downloaded as a tar file from 
+<a href="ftp://ftp.mozilla.org/pub/mozilla.org/security/">ftp://ftp.mozilla.org/pub/mozilla.org/security/</a>.
+
+<a NAME="q1.8"></a><H4>How much does it cost?</H4>
+
+NSS source code and binaries (when they become available) are completely free. No license fees, 
+no royalty fees, no subscription fees. 
+
+
+<a NAME="Q2"><h2>
+<hr WIDTH="100%"></a>Developer Questions</h2>
+
+<a NAME="q2.1"></a><H4>What hardware accelerators are supported?</h4>
+<P>NSS supports the PKCS #11 interface for hardware acceleration. Since leading accelerator vendors such as 
+Chrysalis-IT, nCipher, and Rainbow Technologies also support this interface, NSS-enabled applications 
+can support a wide variety of hardware accelerators.
+<a NAME="q2.2"></a><H4>How do I integrate smart cards into my application using
+NSS?</h4>
+<P>NSS supports the PKCS #11 interface for smart card integration. Applications that use the PKCS #11 
+interface provided by NSS will therefore support smart cards from leading vendors such as 
+ActiveCard, Litronic, and SecureID Technologies that also support the PKCS #11 interface.
+
+<a NAME="q2.3"></a><H4>How is NSS compatible with other Netscape products?</h4>
+<P>NSS provides tight integration with other Netscape products in two ways.
+First, by using NSS to implement SSL and TLS, you can support SSL communications
+with all products from Netscape and all other vendors
+that support SSL<FONT color="#CC0000"> and TLS.</FONT> Second, NSS makes it easy 
+to share certificates between Netscape client and server products
+and your application.
+
+<a NAME="q2.4"></a><H4>Does NSS require Netscape Portable Runtime (NSPR)?</h4>
+<P>To provide cross-platform support, NSS utilizes Netscape Portable Runtime
+(NSPR) libraries as a portability interface and implementation that
+provides consistent cross-platform semantics for network I/O and threading
+models. You can use NSPR throughout your application or
+only in the portion that calls into NSS. Netscape strongly recommends that
+multithreaded applications use the NSPR or native OS threading model. (In
+recent NSPR releases, the NSPR threading model is compatible with the native
+threading model if the OS has native threads.) Alternatively, you can adapt
+the open-source NSPR implementation to be compatible with your existing
+application's threading models. More information about NSPR may be found at
+<a href="http://www.mozilla.org/projects/nspr/">Netscape Portable Runtime</a>.
+<br> 
+
+<a NAME="q2.5"></a><H4>Can I use NSS even if my application protocol isn't
+HTTP?</h4>
+<P>Yes, SSL independent of application protocols. It works with common
+Internet standard application protocols (HTTP, POP3, FTP, SMTP, etc.) as
+well as custom application protocols using TCP/IP. 
+
+<br> 
+<a NAME="q2.6"></a><H4>How long does it take to integrate NSS into my application?</h4>
+<P>The integration effort depends on an number of factors, such as developer
+skill set, application complexity, and the level of security required for
+your application. NSS includes detailed documentation of the SSL API and 
+sample code that demonstrates basic SSL functionality (setting up an encrypted 
+session, server authentication, and client authentication) to help jump start the 
+integration process. However, there is little or no documentation currently 
+available for the rest of the NSS API. If your application requires sophisticated 
+certificate management, smart card support, or hardware acceleration, your 
+integration effort will be more extensive.
+
+<a NAME="q2.7"></a><H4>	Where can I download the NSS tools?</h4>
+
+Currently, you must download the NSS source and build it to create binary files for the NSS tools. 
+For more information, see <A HREF="tools/">NSS Tools</A>.
+
+
+<a NAME="q2.8"></a><H4>How can I learn more about SSL?</h4>
+
+NSS provides extensive documentation related to SSL, including high-level introductions, 
+detailed API documentation, sample code for simple client and server 
+applications, the original SSL 3.0 specification, and 
+information on debugging SSL applications. For details, see the 
+<a href="ssl/">SSL/TLS Project Page</a>. For information about the NSS tools, including those used 
+for debugging SSL applications, see <a href="http://www.mozilla.org/projects/security/pki/nss/tools/">
+NSS Security Tools</a>. 
+
+<a NAME="Q3"><h2>
+<hr WIDTH="100%"></a>Licensing Questions</h2>
+<H4><a NAME="q3.1"></a>How is NSS licensed?</h4>
+<P>NSS is triple-licensed under the <a href="../../../../MPL/">Mozilla Public License</a>, the 
+<a href="http://www.gnu.org/copyleft/gpl.html">GNU General Public License</a>,
+and the <a href="http://www.gnu.org/copyleft/lesser.html">GNU Lesser General Public License</a>. 
+For more details, see the <a href="http://www.mozilla.org/crypto-faq.html#1-3">Mozilla Crypto FAQ</a>.
+
+<a NAME="q3.2"></a><H4>Is NSS available outside the United States?</h4>
+<P>Yes; see 
+<a href="buildnss_31.html">Build Instructions for NSS 3.1.</a> and 
+<a href="ftp://ftp.mozilla.org/pub/mozilla.org/security/">ftp://ftp.mozilla.org/pub/mozilla.org/security/</a>. 
+However, NSS source code is subject to the U.S. Export 
+Administration Regulations and other U.S. law, and may not be exported or 
+re-exported to certain
+countries (currently Cuba, Iran, Libya, North Korea, Sudan and Syria) or
+to persons or entities prohibited from receiving U.S. exports (including
+those (a) on the Bureau of Industry and Security Denied Parties List or
+Entity List, (b) on the Office of Foreign Assets Control list of Specially
+Designated Nationals and Blocked Persons, and (c) involved with missile
+technology or nuclear, chemical or biological weapons).
+
+<p>For more information about U.S. export controls on encryption software, 
+see the <a href="http://www.mozilla.org/crypto-faq.html">Mozilla Crypto FAQ</a>.
+
+
+ 
+
+
+<hr class="hide">
+</div>
+</div>
+<div id="footer">
+<ul>
+<li><a href="../../../../support/">Support Options</a></li>
+<li><a href="../../../../security/">Security Center</a></li>
+<li><a href="../../../../privacy-policy.html">Privacy Policy</a></li>
+<li><a href="../../../../contact/">Contact Us</a></li>
+</ul>
+<p class="affiliates">International Affiliates: <a href="http://www.mozilla-europe.org/">Mozilla Europe</a> - <a
+href="http://mozilla.jp/">Mozilla Japan</a> - <a href="http://www.mozillaonline.com/">Mozilla China</a></p>
+<p class="copyright">
+Portions of this content are &copy; 1998&#8211;2009 by individual mozilla.org contributors<br>
+Content available under a Creative Commons <a href="http://www.mozilla.org/foundation/licensing/website-content.html">license</a></p>
+<p>
+<span>Last modified July 12,  2007</span>
+<span><a href="http://bonsai-www.mozilla.org/cvslog.cgi?file=mozilla-org/html/projects/security/pki/nss/faq.html&amp;rev=&amp;root=/www/">Document History</a></span>
+<span><a href="https://doctor.mozilla.org/?action=edit&amp;file=mozilla-org/html/projects/security/pki/nss/faq.html">Edit this Page</a></span> <span>(or <a href="/contribute/writing/cvs">via CVS</a>)</span>
+</p>
+</div>
+</div>
+</body>
+</html>
diff --git a/source/l/mozilla-nss/gpl-2.0.txt b/source/l/mozilla-nss/gpl-2.0.txt
new file mode 100644
index 00000000..d511905c
--- /dev/null
+++ b/source/l/mozilla-nss/gpl-2.0.txt
@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
diff --git a/source/l/mozilla-nss/lgpl-2.1.txt b/source/l/mozilla-nss/lgpl-2.1.txt
new file mode 100644
index 00000000..602bfc94
--- /dev/null
+++ b/source/l/mozilla-nss/lgpl-2.1.txt
@@ -0,0 +1,504 @@
+		  GNU LESSER GENERAL PUBLIC LICENSE
+		       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+		  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
+
+
diff --git a/source/l/mozilla-nss/mozilla-nss.SlackBuild b/source/l/mozilla-nss/mozilla-nss.SlackBuild
new file mode 100755
index 00000000..2bc38d08
--- /dev/null
+++ b/source/l/mozilla-nss/mozilla-nss.SlackBuild
@@ -0,0 +1,178 @@
+#!/bin/sh
+# Copyright 2005, 2006, 2008, 2009, 2010, 2012  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+
+PKGNAM=mozilla-nss
+SRCNAM=nss
+VERSION=${VERSION:-3.13.5}
+NSPR=${NSPR:-4.9.1}
+BUILD=${BUILD:-3}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  export USE_64=1
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf nss-${VERSION}
+rm -rf nspr-${NSPR}
+tar xvf $CWD/nss-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/nspr-$NSPR.tar.?z* || exit 1
+cd nss-$VERSION
+
+# NSS needs NSPR:
+ln -s ../../nspr-$NSPR/mozilla/nsprpub mozilla/nsprpub
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+echo Building ...
+export LDFLAGS="-lz"
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export BUILD_OPT=1
+export NSDISTMODE="copy"
+export NSS_USE_SYSTEM_SQLITE=1
+cd mozilla/security/nss
+  make nss_build_all export
+cd -
+
+# Install all the needed stuff to the package dir:
+mkdir -p $PKG/usr/{bin,lib${LIBDIRSUFFIX},include/{nss,nspr}}
+cd mozilla/dist/$(uname -s)*
+  cp -pL bin/{certutil,cmsutil,crlutil,modutil,pk12util,shlibsign,signtool,signver,ssltap} $PKG/usr/bin/
+  cp -pL lib/* $PKG/usr/lib${LIBDIRSUFFIX}/
+  chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/*.so*
+  cp -rL include/* $PKG/usr/include/nspr/
+  cp -rpL ../public/nss/*.h $PKG/usr/include/nss/
+  # Remove some things we do not need:
+  rm -f $PKG/usr/bin/*.so
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.a
+  rm -rf $PKG/usr/include/nspr/md
+  cp -L lib/libcrmf.a $PKG/usr/lib${LIBDIRSUFFIX}/ # yes, put this one back
+cd -
+
+cd mozilla/security/nss/cmd/smimetools
+  cp -a smime $PKG/usr/bin/
+  chmod 0755 $PKG/usr/bin/smime 
+  sed -i -e 's#/usr/local/bin#/usr/bin#g' $PKG/usr/bin/smime
+cd -
+
+# Install nspr-config:
+cat mozilla/nsprpub/$(uname -s)*/config/nspr-config | sed -e "s,prefix=/usr/local,prefix=/usr,g" | sed -e "s,libdir=\${exec_prefix}/lib,libdir=\${exec_prefix}/lib${LIBDIRSUFFIX},g" > $PKG/usr/bin/nspr-config
+chmod 755 $PKG/usr/bin/nspr-config
+
+# Install nss-config:
+sed -e "s,@prefix@,/usr,g" \
+    -e "s,@MOD_MAJOR_VERSION@,$(printf $VERSION | cut -d. -f1),g" \
+    -e "s,@MOD_MINOR_VERSION@,$(printf $VERSION | cut -d. -f2),g" \
+    -e "s,@MOD_PATCH_VERSION@,$(printf $VERSION | cut -d. -f3),g" \
+    $CWD/nss-config.in > $PKG/usr/bin/nss-config
+chmod 755 $PKG/usr/bin/nss-config
+
+# Provide pkg-config files:
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
+cat <<EOT > $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/mozilla-nss.pc 
+prefix=/usr
+exec_prefix=\${prefix}
+libdir=/usr/lib${LIBDIRSUFFIX}
+includedir=\${prefix}/include/nss
+
+Name: NSS
+Description: Network Security Services
+Version: $VERSION
+Requires: nspr >= $NSPR sqlite3
+Libs: -L\${libdir} -lnss3 -lsmime3 -lssl3 -lsoftokn3  -lnssutil3
+Cflags: -I\${includedir}
+EOT
+cat <<EOT > $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/mozilla-nspr.pc 
+prefix=/usr
+exec_prefix=\${prefix}
+libdir=/usr/lib${LIBDIRSUFFIX}
+includedir=\${prefix}/include/nspr
+
+Name: NSPR
+Description: The Netscape Portable Runtime
+Version: $NSPR
+Libs: -L\${libdir} -lplds4 -lplc4 -lnspr4
+Cflags: -I\${includedir}
+EOT
+
+( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
+  ln -s mozilla-nspr.pc nspr.pc
+  ln -s mozilla-nss.pc nss.pc
+)
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  $CWD/MPL-1.1.txt $CWD/gpl-2.0.txt $CWD/lgpl-2.1.txt \
+  $CWD/faq.html \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+
diff --git a/source/l/mozilla-nss/nss-config.in b/source/l/mozilla-nss/nss-config.in
new file mode 100644
index 00000000..f8f893e7
--- /dev/null
+++ b/source/l/mozilla-nss/nss-config.in
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+prefix=@prefix@
+
+major_version=@MOD_MAJOR_VERSION@
+minor_version=@MOD_MINOR_VERSION@
+patch_version=@MOD_PATCH_VERSION@
+
+usage()
+{
+	cat <<EOF
+Usage: nss-config [OPTIONS] [LIBRARIES]
+Options:
+	[--prefix[=DIR]]
+	[--exec-prefix[=DIR]]
+	[--includedir[=DIR]]
+	[--libdir[=DIR]]
+	[--version]
+	[--libs]
+	[--cflags]
+Dynamic Libraries:
+	nss
+	nssutil
+	ssl
+	smime
+EOF
+	exit $1
+}
+
+if test $# -eq 0; then
+	usage 1 1>&2
+fi
+
+lib_ssl=yes
+lib_smime=yes
+lib_nss=yes
+lib_nssutil=yes
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      ;;
+    --prefix)
+      echo_prefix=yes
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      ;;
+    --exec-prefix)
+      echo_exec_prefix=yes
+      ;;
+    --includedir=*)
+      includedir=$optarg
+      ;;
+    --includedir)
+      echo_includedir=yes
+      ;;
+    --libdir=*)
+      libdir=$optarg
+      ;;
+    --libdir)
+      echo_libdir=yes
+      ;;
+    --version)
+      echo ${major_version}.${minor_version}.${patch_version}
+      ;;
+    --cflags)
+      echo_cflags=yes
+      ;;
+    --libs)
+      echo_libs=yes
+      ;;
+    ssl)
+      lib_ssl=yes
+      ;;
+    smime)
+      lib_smime=yes
+      ;;
+    nss)
+      lib_nss=yes
+      ;;
+    nssutil)
+      lib_nssutil=yes
+      ;;
+    *)
+      usage 1 1>&2
+      ;;
+  esac
+  shift
+done
+
+# Set variables that may be dependent upon other variables
+if test -z "$exec_prefix"; then
+    exec_prefix=`pkg-config --variable=exec_prefix nss`
+fi
+if test -z "$includedir"; then
+    includedir=`pkg-config --variable=includedir nss`
+fi
+if test -z "$libdir"; then
+    libdir=`pkg-config --variable=libdir nss`
+fi
+
+if test "$echo_prefix" = "yes"; then
+    echo $prefix
+fi
+
+if test "$echo_exec_prefix" = "yes"; then
+    echo $exec_prefix
+fi
+
+if test "$echo_includedir" = "yes"; then
+    echo $includedir
+fi
+
+if test "$echo_libdir" = "yes"; then
+    echo $libdir
+fi
+
+if test "$echo_cflags" = "yes"; then
+    echo -I$includedir
+fi
+
+if test "$echo_libs" = "yes"; then
+      libdirs="-Wl,-rpath-link,$libdir -L$libdir"
+      if test -n "$lib_ssl"; then
+	libdirs="$libdirs -lssl${major_version}"
+      fi
+      if test -n "$lib_smime"; then
+	libdirs="$libdirs -lsmime${major_version}"
+      fi
+      if test -n "$lib_nss"; then
+	libdirs="$libdirs -lnss${major_version}"
+      fi
+      if test -n "$lib_nssutil"; then
+	libdirs="$libdirs -lnssutil${major_version}"
+      fi
+      echo $libdirs
+fi      
+
diff --git a/source/l/mozilla-nss/slack-desc b/source/l/mozilla-nss/slack-desc
new file mode 100644
index 00000000..7a23daaf
--- /dev/null
+++ b/source/l/mozilla-nss/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+mozilla-nss: mozilla-nss (Network Security Services)
+mozilla-nss:
+mozilla-nss: Network Security Services (NSS) is a set of libraries designed to 
+mozilla-nss: support cross-platform development of security-enabled client and
+mozilla-nss: server applications. Applications built with NSS can support
+mozilla-nss: SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME,
+mozilla-nss: X.509 v3 certificates, and other security standards.
+mozilla-nss:
+mozilla-nss:
+mozilla-nss: Read http://www.mozilla.org/projects/security/pki/nss/overview.html
+mozilla-nss:
diff --git a/source/l/mpfr/mpfr.SlackBuild b/source/l/mpfr/mpfr.SlackBuild
index a96001cd..1e56ba3d 100755
--- a/source/l/mpfr/mpfr.SlackBuild
+++ b/source/l/mpfr/mpfr.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,23 +20,26 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2011 by Eric Hameleers <alien at slackware.com> for ARM port.
 
 PKGNAM=mpfr
-VERSION=${VERSION:-$(echo mpfr-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo mpfr-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -46,11 +49,19 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-mpfr
@@ -65,7 +76,7 @@ fi
 
 cd $TMP
 rm -rf mpfr-$VERSION
-tar xvf $CWD/mpfr-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/mpfr-$VERSION.tar.xz || exit 1
 cd mpfr-$VERSION
 chown -R root:root .
 
@@ -78,6 +89,11 @@ if [ ! -z "$(ls $CWD/patches/* 2> /dev/null)" ]; then
   done
 fi
 
+# End of preparations
+if echo "$*" | grep -qw -- --prep ; then
+  exit 0
+fi
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -86,7 +102,7 @@ CFLAGS="$SLKCFLAGS" \
   --docdir=/usr/doc/mpfr-$VERSION \
   --enable-static=yes \
   --enable-shared=yes \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/neon/neon.SlackBuild b/source/l/neon/neon.SlackBuild
index 7725cce8..abba3b6e 100755
--- a/source/l/neon/neon.SlackBuild
+++ b/source/l/neon/neon.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=neon
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/notify-python/libnotify07.patch b/source/l/notify-python/libnotify07.patch
new file mode 100644
index 00000000..b7bf44b5
--- /dev/null
+++ b/source/l/notify-python/libnotify07.patch
@@ -0,0 +1,38 @@
+http://pkgs.fedoraproject.org/gitweb/?p=notify-python.git;a=blob_plain;f=libnotify07.patch;hb=HEAD
+
+diff -up notify-python-0.1.1/src/pynotify.defs.notify070 notify-python-0.1.1/src/pynotify.defs
+--- notify-python-0.1.1/src/pynotify.defs.notify070	2010-11-02 17:11:14.928179237 -0400
++++ notify-python-0.1.1/src/pynotify.defs	2010-11-02 17:11:51.153180231 -0400
+@@ -38,7 +38,6 @@
+     '("const-gchar*" "summary")
+     '("const-gchar*" "message" (null-ok) (default "NULL"))
+     '("const-gchar*" "icon" (null-ok) (default "NULL"))
+-    '("GtkWidget*" "attach" (null-ok) (default "NULL"))
+   )
+ )
+ 
+@@ -53,24 +52,6 @@
+   )
+ )
+ 
+-(define-method attach_to_widget
+-  (of-object "NotifyNotification")
+-  (c-name "notify_notification_attach_to_widget")
+-  (return-type "none")
+-  (parameters
+-    '("GtkWidget*" "attach")
+-  )
+-)
+-
+-(define-method attach_to_status_icon
+-  (of-object "NotifyNotification")
+-  (c-name "notify_notification_attach_to_status_icon")
+-  (return-type "none")
+-  (parameters
+-    '("GtkStatusIcon*" "attach")
+-  )
+-)
+-
+ (define-method show
+   (of-object "NotifyNotification")
+   (c-name "notify_notification_show")
diff --git a/source/l/notify-python/notify-python.SlackBuild b/source/l/notify-python/notify-python.SlackBuild
index 97ce7218..9227d8d0 100755
--- a/source/l/notify-python/notify-python.SlackBuild
+++ b/source/l/notify-python/notify-python.SlackBuild
@@ -25,7 +25,7 @@
 
 PKGNAM=notify-python
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -67,6 +67,9 @@ chmod -R u+w,go+r-w,a-s .
 # Fix http://trac.galago-project.org/ticket/121
 rm -f src/pynotify.c
 
+# Fix build with libnotify-0.7 (thanks, Fedora)
+zcat $CWD/libnotify07.patch.gz | patch -p1 || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
diff --git a/source/l/notify-python/slack-desc b/source/l/notify-python/slack-desc
index 3d52503b..e7718b42 100644
--- a/source/l/notify-python/slack-desc
+++ b/source/l/notify-python/slack-desc
@@ -5,7 +5,7 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-             |-----handy-ruler-------------------------------------------------------|
+             |-----handy-ruler------------------------------------------------------|
 notify-python: notify-python (Python bindings for libnotify)
 notify-python:
 notify-python: The notify-python package contains bindings to use libnotify with
diff --git a/source/l/pango/pango.SlackBuild b/source/l/pango/pango.SlackBuild
index fd5d8966..39c2ccd1 100755
--- a/source/l/pango/pango.SlackBuild
+++ b/source/l/pango/pango.SlackBuild
@@ -134,8 +134,20 @@ EOF
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/pango-$VERSION
 cp -a \
diff --git a/source/l/phonon-gstreamer/phonon-gstreamer.SlackBuild b/source/l/phonon-gstreamer/phonon-gstreamer.SlackBuild
new file mode 100755
index 00000000..eced8a74
--- /dev/null
+++ b/source/l/phonon-gstreamer/phonon-gstreamer.SlackBuild
@@ -0,0 +1,122 @@
+#!/bin/sh
+# Copyright 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+
+
+PKGNAM=phonon-gstreamer
+SRCNAM=phonon-backend-gstreamer
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:" -j7 "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1
+cd $SRCNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+echo Building ...
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+  make $NUMJOBS
+  make DESTDIR=$PKG install
+cd -
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING.LIB gstreamer/lgpl-* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Compress the man page(s):
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).
+gz $i.gz ; rm $i ; done
+fi
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/phonon-gstreamer/slack-desc b/source/l/phonon-gstreamer/slack-desc
new file mode 100644
index 00000000..ee2a434c
--- /dev/null
+++ b/source/l/phonon-gstreamer/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+phonon-gstreamer: phonon-gstreamer (gstreamer backend for phonon)
+phonon-gstreamer:
+phonon-gstreamer: This package provides an additional gstreamer backend for the phonon
+phonon-gstreamer: multimedia framework used in KDE.
+phonon-gstreamer:
+phonon-gstreamer: For more information, visit:
+phonon-gstreamer: https://projects.kde.org/projects/kdesupport/phonon/phonon-gstreamer
+phonon-gstreamer:
+phonon-gstreamer:
+phonon-gstreamer:
+phonon-gstreamer:
diff --git a/source/l/phonon-mplayer/phonon-mplayer.SlackBuild b/source/l/phonon-mplayer/phonon-mplayer.SlackBuild
index cb84b3cb..38dff254 100755
--- a/source/l/phonon-mplayer/phonon-mplayer.SlackBuild
+++ b/source/l/phonon-mplayer/phonon-mplayer.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
-# Copyright 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -26,22 +26,21 @@
 PKGNAM=phonon-mplayer
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
 BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:" -j4 "}
+
+NUMJOBS=${NUMJOBS:" -j7 "}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -51,11 +50,18 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
diff --git a/source/l/phonon-xine/phonon-backend-xine-4.4.4.find.phonon.patch b/source/l/phonon-xine/phonon-backend-xine-4.4.4.find.phonon.patch
new file mode 100644
index 00000000..0ce1023c
--- /dev/null
+++ b/source/l/phonon-xine/phonon-backend-xine-4.4.4.find.phonon.patch
@@ -0,0 +1,186 @@
+From: Andras Mantia <amantia@kde.org>
+Date: Thu, 10 Nov 2011 08:43:52 +0000
+Subject: Use the global FindPhonon.cmake that really finds Phonon.
+X-Git-Url: http://quickgit.kde.org/?p=phonon-xine.git&amp;a=commitdiff&amp;h=8c7fab4e433b53ac2f00093f1f464e0178c2d3e1
+---
+Use the global FindPhonon.cmake that really finds Phonon.
+---
+
+
+--- a/cmake/FindPhonon.cmake
++++ /dev/null
+@@ -1,53 +0,0 @@
+-# Find Phonon
+-
+-# Copyright (c) 2010, Harald Sitter <sitter@kde.org>
+-#
+-# Redistribution and use is allowed according to the terms of the BSD license.
+-# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
+-
+-if (NOT PHONON_BUILDSYSTEM_DIR)
+-    find_program(PC_EXECUTABLE NAMES pkg-config
+-    PATH_SUFFIXES bin               
+-    HINTS
+-    ${CMAKE_INSTALL_PREFIX}
+-    ONLY_CMAKE_FIND_ROOT_PATH
+-    )
+-
+-    if (NOT PC_EXECUTABLE)
+-        if (Phonon_FIND_REQUIRED)
+-            message(FATAL_ERROR "ERROR: Could not find pkg-config [required to find Phonon].")
+-        endif (Phonon_FIND_REQUIRED)
+-    endif (NOT PC_EXECUTABLE)
+-
+-    if (PC_EXECUTABLE)
+-        execute_process(COMMAND "${PC_EXECUTABLE}" --variable=buildsystemdir phonon
+-                        OUTPUT_VARIABLE _data_DIR
+-                        ERROR_QUIET
+-                        OUTPUT_STRIP_TRAILING_WHITESPACE)
+-        file(TO_CMAKE_PATH "${_data_DIR}" _data_DIR)
+-        find_path(PHONON_BUILDSYSTEM_DIR FindPhononInternal.cmake HINTS ${_data_DIR})
+-    endif (PC_EXECUTABLE)
+-endif (NOT PHONON_BUILDSYSTEM_DIR)
+-
+-if (PHONON_BUILDSYSTEM_DIR)
+-    set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PHONON_BUILDSYSTEM_DIR})
+-
+-    if (Phonon_FIND_REQUIRED)
+-        set(_req REQUIRED)
+-    endif (Phonon_FIND_REQUIRED)
+-    if (PHONON_FIND_QUIETLY)
+-        set(_quiet QUIET)
+-    endif (PHONON_FIND_QUIETLY)
+-
+-    find_package(PhononInternal ${_req} ${_quiet})
+-else (PHONON_BUILDSYSTEM_DIR)
+-    if (_data_DIR)
+-        if (Phonon_FIND_REQUIRED)
+-            message(FATAL_ERROR "ERROR: FindPhonon.cmake not found in ${_data_DIR}")
+-        endif (Phonon_FIND_REQUIRED)
+-    else (_data_DIR)
+-        if (Phonon_FIND_REQUIRED)
+-            message(FATAL_ERROR "ERROR: Either pkg-config can not find its phonon config, or you are not using a recent enough Phonon version.")
+-        endif (Phonon_FIND_REQUIRED)
+-    endif (_data_DIR)
+-endif (PHONON_BUILDSYSTEM_DIR)
+
+--- /dev/null
++++ b/cmake/MacroEnsureVersion.cmake
+@@ -0,0 +1,117 @@
++# This file defines the following macros for developers to use in ensuring
++# that installed software is of the right version:
++#
++# MACRO_ENSURE_VERSION        - test that a version number is greater than
++#                               or equal to some minimum
++# MACRO_ENSURE_VERSION_RANGE - test that a version number is greater than
++#                               or equal to some minimum and less than some
++#                               maximum
++# MACRO_ENSURE_VERSION2       - deprecated, do not use in new code
++#
++
++# MACRO_ENSURE_VERSION
++# This macro compares version numbers of the form "x.y.z" or "x.y"
++# MACRO_ENSURE_VERSION( FOO_MIN_VERSION FOO_VERSION_FOUND FOO_VERSION_OK)
++# will set FOO_VERSION_OK to true if FOO_VERSION_FOUND >= FOO_MIN_VERSION
++# Leading and trailing text is ok, e.g.
++# MACRO_ENSURE_VERSION( "2.5.31" "flex 2.5.4a" VERSION_OK)
++# which means 2.5.31 is required and "flex 2.5.4a" is what was found on the system
++
++# Copyright (c) 2006, David Faure, <faure@kde.org>
++# Copyright (c) 2007, Will Stephenson <wstephenson@kde.org>
++#
++# Redistribution and use is allowed according to the terms of the BSD license.
++# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
++
++# MACRO_ENSURE_VERSION_RANGE
++# This macro ensures that a version number of the form
++# "x.y.z" or "x.y" falls within a range defined by
++# min_version <= found_version < max_version.
++# If this expression holds, FOO_VERSION_OK will be set TRUE
++#
++# Example: MACRO_ENSURE_VERSION_RANGE3( "0.1.0" ${FOOCODE_VERSION} "0.7.0" FOO_VERSION_OK )
++#
++# This macro will break silently if any of x,y,z are greater than 100.
++#
++# Copyright (c) 2007, Will Stephenson <wstephenson@kde.org>
++#
++# Redistribution and use is allowed according to the terms of the BSD license.
++# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
++
++# NORMALIZE_VERSION
++# Helper macro to convert version numbers of the form "x.y.z"
++# to an integer equal to 10^4 * x + 10^2 * y + z
++#
++# This macro will break silently if any of x,y,z are greater than 100.
++#
++# Copyright (c) 2006, David Faure, <faure@kde.org>
++# Copyright (c) 2007, Will Stephenson <wstephenson@kde.org>
++#
++# Redistribution and use is allowed according to the terms of the BSD license.
++# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
++
++# CHECK_RANGE_INCLUSIVE_LOWER
++# Helper macro to check whether x <= y < z
++#
++# Copyright (c) 2007, Will Stephenson <wstephenson@kde.org>
++#
++# Redistribution and use is allowed according to the terms of the BSD license.
++# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
++
++
++MACRO(NORMALIZE_VERSION _requested_version _normalized_version)
++    STRING(REGEX MATCH "[^0-9]*[0-9]+\\.[0-9]+\\.[0-9]+.*" _threePartMatch "${_requested_version}")
++    if (_threePartMatch)
++    # parse the parts of the version string
++        STRING(REGEX REPLACE "[^0-9]*([0-9]+)\\.[0-9]+\\.[0-9]+.*" "\\1" _major_vers "${_requested_version}")
++        STRING(REGEX REPLACE "[^0-9]*[0-9]+\\.([0-9]+)\\.[0-9]+.*" "\\1" _minor_vers "${_requested_version}")
++        STRING(REGEX REPLACE "[^0-9]*[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" _patch_vers "${_requested_version}")
++    else (_threePartMatch)
++        STRING(REGEX REPLACE "([0-9]+)\\.[0-9]+" "\\1" _major_vers "${_requested_version}")
++        STRING(REGEX REPLACE "[0-9]+\\.([0-9]+)" "\\1" _minor_vers "${_requested_version}")
++        set(_patch_vers "0")
++    endif (_threePartMatch)
++
++    # compute an overall version number which can be compared at once
++    MATH(EXPR ${_normalized_version} "${_major_vers}*10000 + ${_minor_vers}*100 + ${_patch_vers}")
++ENDMACRO(NORMALIZE_VERSION)
++
++MACRO(MACRO_CHECK_RANGE_INCLUSIVE_LOWER _lower_limit _value _upper_limit _ok)
++   if (${_value} LESS ${_lower_limit})
++      set( ${_ok} FALSE )
++  elseif (${_value} EQUAL ${_lower_limit})
++      set( ${_ok} TRUE )
++  elseif (${_value} EQUAL ${_upper_limit})
++      set( ${_ok} FALSE )
++  elseif (${_value} GREATER ${_upper_limit})
++      set( ${_ok} FALSE )
++  else (${_value} LESS ${_lower_limit})
++      set( ${_ok} TRUE )
++  endif (${_value} LESS ${_lower_limit})
++ENDMACRO(MACRO_CHECK_RANGE_INCLUSIVE_LOWER)
++
++MACRO(MACRO_ENSURE_VERSION requested_version found_version var_too_old)
++    NORMALIZE_VERSION( ${requested_version} req_vers_num )
++    NORMALIZE_VERSION( ${found_version} found_vers_num )
++
++    if (found_vers_num LESS req_vers_num)
++        set( ${var_too_old} FALSE )
++    else (found_vers_num LESS req_vers_num)
++        set( ${var_too_old} TRUE )
++    endif (found_vers_num LESS req_vers_num)
++
++ENDMACRO(MACRO_ENSURE_VERSION)
++
++MACRO(MACRO_ENSURE_VERSION2 requested_version2 found_version2 var_too_old2)
++    MACRO_ENSURE_VERSION( ${requested_version2} ${found_version2} ${var_too_old2})
++ENDMACRO(MACRO_ENSURE_VERSION2)
++
++MACRO(MACRO_ENSURE_VERSION_RANGE min_version found_version max_version var_ok)
++    NORMALIZE_VERSION( ${min_version} req_vers_num )
++    NORMALIZE_VERSION( ${found_version} found_vers_num )
++    NORMALIZE_VERSION( ${max_version} max_vers_num )
++
++    MACRO_CHECK_RANGE_INCLUSIVE_LOWER( ${req_vers_num} ${found_vers_num} ${max_vers_num} ${var_ok})
++ENDMACRO(MACRO_ENSURE_VERSION_RANGE)
++
++
diff --git a/source/l/phonon-xine/phonon-xine.SlackBuild b/source/l/phonon-xine/phonon-xine.SlackBuild
new file mode 100755
index 00000000..2aff8435
--- /dev/null
+++ b/source/l/phonon-xine/phonon-xine.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/sh
+# Copyright 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+
+
+PKGNAM=phonon-xine
+SRCNAM=phonon-backend-xine
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:" -j7 "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1
+cd $SRCNAM-$VERSION || exit 1
+
+# Use better phonon detection routine:
+cat $CWD/phonon-backend-xine-4.4.4.find.phonon.patch | patch -p1 --verbose || exit 1
+
+# Switch from oxygen to hicolor icons. This way they are visible,
+# even when the current icon theme is not oxygen.
+for res in 16 22 32 48 64 128 sc ; do
+  mv xine/ox${res}-app-phonon-xine.png xine/hi${res}-app-phonon-xine.png
+done
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+echo Building ...
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+  make $NUMJOBS
+  make DESTDIR=$PKG install
+cd -
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING.LIB xine/BUGS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Compress the man page(s):
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).
+gz $i.gz ; rm $i ; done
+fi
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/phonon-xine/slack-desc b/source/l/phonon-xine/slack-desc
new file mode 100644
index 00000000..59ee7f0b
--- /dev/null
+++ b/source/l/phonon-xine/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+phonon-xine: phonon-xine (xine backend for phonon)
+phonon-xine:
+phonon-xine: This package provides an additional xine backend for the phonon
+phonon-xine: multimedia framework used in KDE.
+phonon-xine:
+phonon-xine: For more information, visit:
+phonon-xine:   https://projects.kde.org/projects/kdesupport/phonon/phonon-xine
+phonon-xine:
+phonon-xine:
+phonon-xine:
+phonon-xine:
diff --git a/source/l/phonon/phonon.SlackBuild b/source/l/phonon/phonon.SlackBuild
index 79c9629f..2b155060 100755
--- a/source/l/phonon/phonon.SlackBuild
+++ b/source/l/phonon/phonon.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh 
 
 # Copyright 2008  Robby Workman, Northport, Alabama, USA
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,27 +21,27 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
+
 
 PKGNAM=phonon
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-phonon
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -51,16 +51,23 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-phonon
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -r phonon-$VERSION
-tar xvf $CWD/phonon-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/phonon-$VERSION.tar.?z* || exit 1
 cd phonon-$VERSION || exit 1
 
 chown -R root:root .
@@ -78,6 +85,9 @@ cd build
     -DCMAKE_INSTALL_PREFIX=/usr \
     -DMAN_INSTALL_DIR=/usr/man \
     -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DPHONON_INSTALL_QT_EXTENSIONS_INTO_SYSTEM_QT:BOOL=ON \
+    -DPHONON_QT_PLUGIN_INSTALL_DIR=/usr/lib$LIBDIRSUFFIX/qt/plugins/designer \
+    -DWITH_QZeitgeist=BOOL:OFF \
     ..
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/phonon/slack-desc b/source/l/phonon/slack-desc
index a4fbd02e..12acecb6 100644
--- a/source/l/phonon/slack-desc
+++ b/source/l/phonon/slack-desc
@@ -8,12 +8,12 @@
       |-----handy-ruler------------------------------------------------------|
 phonon: phonon (multimedia framework for KDE4)
 phonon:
-phonon: Phonon is the multimedia framework for KDE4.  This package contains
-phonon: the xine and gstreamer backends and support files for KDE.  The
-phonon: Phonon library itself is included with Qt.
-phonon:
-phonon:
+phonon: Phonon is the multimedia API provided by Qt and is the standard
+phonon: abstraction for handling multimedia streams within the KDE Software
+phonon: Compilation.  Phonon provides an API for multimedia using various
+phonon: backends (gstreamer, mplayer, xine) to handle the lower level I/O.
 phonon:
+phonon: Homepage:  http://phonon.kde.org
 phonon:
 phonon:
 phonon:
diff --git a/source/l/pil/pil.SlackBuild b/source/l/pil/pil.SlackBuild
index 76e3b959..79980dee 100755
--- a/source/l/pil/pil.SlackBuild
+++ b/source/l/pil/pil.SlackBuild
@@ -24,7 +24,7 @@
 PKGNAM=pil
 ARCNAM=Imaging
 VERSION=${VERSION:-$(echo $ARCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/pilot-link/pilot-link.SlackBuild b/source/l/pilot-link/pilot-link.SlackBuild
index 0d555da2..8dbe1321 100755
--- a/source/l/pilot-link/pilot-link.SlackBuild
+++ b/source/l/pilot-link/pilot-link.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=${VERSION:-0.12.5}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/polkit-gnome/polkit-gnome.SlackBuild b/source/l/polkit-gnome/polkit-gnome.SlackBuild
index 82937550..00adeb0b 100755
--- a/source/l/polkit-gnome/polkit-gnome.SlackBuild
+++ b/source/l/polkit-gnome/polkit-gnome.SlackBuild
@@ -80,7 +80,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --enable-gtk-doc \
   --disable-static \
-  --disable-introspection \
+  --enable-introspection \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -98,6 +98,14 @@ mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a AUTHORS COPYING HACKING NEWS README TODO \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/polkit-qt-1/polkit-qt-1.SlackBuild b/source/l/polkit-qt-1/polkit-qt-1.SlackBuild
new file mode 100755
index 00000000..92e218ea
--- /dev/null
+++ b/source/l/polkit-qt-1/polkit-qt-1.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=polkit-qt-1
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# Avoid a version number in .la files:
+if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then
+  QTDIR=/usr/lib${LIBDIRSUFFIX}/qt
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+mkdir -p build
+cd build
+  cmake \
+    $KDE_OPT_ARGS \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    ..
+   make $NUMJOBS || make || exit 1
+   make install DESTDIR=$PKG || exit 1
+cd -
+
+if [ -d $PKG/usr/man ]; then
+  gzip -9 $PKG/usr/man/man?/*
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING* README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/kde/polkit-qt-1/pull-polkit-qt-1 b/source/l/polkit-qt-1/pull-polkit-qt-1
index 42d64877..42d64877 100644
--- a/source/kde/polkit-qt-1/pull-polkit-qt-1
+++ b/source/l/polkit-qt-1/pull-polkit-qt-1
diff --git a/source/l/polkit-qt-1/slack-desc b/source/l/polkit-qt-1/slack-desc
new file mode 100644
index 00000000..ed2cf40c
--- /dev/null
+++ b/source/l/polkit-qt-1/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler-----------------------------------------------------|
+polkit-qt-1: polkit-qt-1 (Qt polkit API wrapper)
+polkit-qt-1:
+polkit-qt-1: polkit-qt-1 aims to make it easy for Qt developers to take advantage
+polkit-qt-1: of the polkit API.  It is a convenience wrapper around QAction and
+polkit-qt-1: QAbstractButton that lets you integrate those two components
+polkit-qt-1: easily with polkit.
+polkit-qt-1:
+polkit-qt-1: Homepage: http://techbase.kde.org/Polkit-Qt-1
+polkit-qt-1:
+polkit-qt-1:
+polkit-qt-1:
diff --git a/source/l/polkit/10-org.freedesktop.NetworkManager.pkla b/source/l/polkit/10-org.freedesktop.NetworkManager.pkla
new file mode 100644
index 00000000..b2491602
--- /dev/null
+++ b/source/l/polkit/10-org.freedesktop.NetworkManager.pkla
@@ -0,0 +1,6 @@
+[nm-applet]
+Identity=unix-group:netdev
+Action=org.freedesktop.NetworkManager.*
+ResultAny=yes
+ResultInactive=no
+ResultActive=yes
diff --git a/source/l/polkit/20-plugdev-group-mount-override.pkla b/source/l/polkit/20-plugdev-group-mount-override.pkla
new file mode 100644
index 00000000..8149de67
--- /dev/null
+++ b/source/l/polkit/20-plugdev-group-mount-override.pkla
@@ -0,0 +1,6 @@
+[plugdev group mount override]
+Identity=unix-group:plugdev
+Action=org.freedesktop.udisks2.filesystem-*;org.freedesktop.udisks2.eject-*
+ResultAny=yes
+ResultInactive=yes
+ResultActive=yes
diff --git a/source/l/polkit/CVE-2011-1485/0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch b/source/l/polkit/CVE-2011-1485/0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch
deleted file mode 100644
index 9431056b..00000000
--- a/source/l/polkit/CVE-2011-1485/0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From dd848a42a64a3b22a0cc60f6657b56ce9b6010ae Mon Sep 17 00:00:00 2001
-From: David Zeuthen <davidz@redhat.com>
-Date: Thu, 31 Mar 2011 12:59:09 -0400
-Subject: [PATCH 1/4] PolkitUnixProcess: Clarify that the real uid is
- returned, not the effective one
-
-On Linux, also switch to parsing /proc/<pid>/status instead of relying
-on the st_uid returned by stat(2) to be the uid we want.
-
-This was pointed out by Neel Mehta <nmehta@google.com>. Thanks!
-
-Signed-off-by: David Zeuthen <davidz@redhat.com>
----
- src/polkit/polkitunixprocess.c |   66 ++++++++++++++++++++++++++++++----------
- 1 files changed, 50 insertions(+), 16 deletions(-)
-
-diff --git a/src/polkit/polkitunixprocess.c b/src/polkit/polkitunixprocess.c
-index d95a1d4..876da69 100644
---- a/src/polkit/polkitunixprocess.c
-+++ b/src/polkit/polkitunixprocess.c
-@@ -24,9 +24,7 @@
- #endif
- 
- #include <sys/types.h>
--#ifndef HAVE_FREEBSD
--#include <sys/stat.h>
--#else
-+#ifdef HAVE_FREEBSD
- #include <sys/param.h>
- #include <sys/sysctl.h>
- #include <sys/user.h>
-@@ -34,6 +32,7 @@
- #include <stdlib.h>
- #include <string.h>
- #include <errno.h>
-+#include <stdio.h>
- 
- #include "polkitunixprocess.h"
- #include "polkitsubject.h"
-@@ -208,6 +207,8 @@ polkit_unix_process_get_pid (PolkitUnixProcess *process)
-  *
-  * Gets the uid of the owner of @process.
-  *
-+ * Note that this returns the real user-id (not the effective user-id) of @process.
-+ *
-  * Returns: The UNIX user id of the owner for @process or 0 if @error is set.
-  **/
- gint
-@@ -215,17 +216,21 @@ polkit_unix_process_get_owner (PolkitUnixProcess  *process,
-                                GError            **error)
- {
-   gint result;
-+  gchar *contents;
-+  gchar **lines;
- #ifdef HAVE_FREEBSD
-   struct kinfo_proc p;
- #else
--  struct stat statbuf;
--  char procbuf[32];
-+  gchar filename[64];
-+  guint n;
- #endif
- 
-   g_return_val_if_fail (POLKIT_IS_UNIX_PROCESS (process), 0);
-   g_return_val_if_fail (error == NULL || *error == NULL, 0);
- 
-   result = 0;
-+  lines = NULL;
-+  contents = NULL;
- 
- #ifdef HAVE_FREEBSD
-   if (get_kinfo_proc (process->pid, &p) == 0)
-@@ -241,23 +246,52 @@ polkit_unix_process_get_owner (PolkitUnixProcess  *process,
- 
-   result = p.ki_uid;
- #else
--  g_snprintf (procbuf, sizeof procbuf, "/proc/%d", process->pid);
--  if (stat (procbuf, &statbuf) != 0)
-+
-+  /* see 'man proc' for layout of the status file
-+   *
-+   * Uid, Gid: Real, effective, saved set,  and  file  system  UIDs (GIDs).
-+   */
-+  g_snprintf (filename, sizeof filename, "/proc/%d/status", process->pid);
-+  if (!g_file_get_contents (filename,
-+                            &contents,
-+                            NULL,
-+                            error))
-     {
--      g_set_error (error,
--                   POLKIT_ERROR,
--                   POLKIT_ERROR_FAILED,
--                   "stat() failed for /proc/%d: %s",
--                   process->pid,
--                   g_strerror (errno));
-       goto out;
-     }
-+  lines = g_strsplit (contents, "\n", -1);
-+  for (n = 0; lines != NULL && lines[n] != NULL; n++)
-+    {
-+      gint real_uid, effective_uid;
-+      if (!g_str_has_prefix (lines[n], "Uid:"))
-+        continue;
-+      if (sscanf (lines[n] + 4, "%d %d", &real_uid, &effective_uid) != 2)
-+        {
-+          g_set_error (error,
-+                       POLKIT_ERROR,
-+                       POLKIT_ERROR_FAILED,
-+                       "Unexpected line `%s' in file %s",
-+                       lines[n],
-+                       filename);
-+          goto out;
-+        }
-+      else
-+        {
-+          result = real_uid;
-+          goto out;
-+        }
-+    }
- 
--  result = statbuf.st_uid;
-+  g_set_error (error,
-+               POLKIT_ERROR,
-+               POLKIT_ERROR_FAILED,
-+               "Didn't find any line starting with `Uid:' in file %s",
-+               filename);
- #endif
- 
-- out:
--
-+out:
-+  g_strfreev (lines);
-+  g_free (contents);
-   return result;
- }
- 
--- 
-1.7.4.4
-
diff --git a/source/l/polkit/CVE-2011-1485/0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch b/source/l/polkit/CVE-2011-1485/0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch
deleted file mode 100644
index 81a163c6..00000000
--- a/source/l/polkit/CVE-2011-1485/0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch
+++ /dev/null
@@ -1,623 +0,0 @@
-From 129b6223a19e7fb2753f8cad7957ac5402394076 Mon Sep 17 00:00:00 2001
-From: David Zeuthen <davidz@redhat.com>
-Date: Fri, 1 Apr 2011 12:09:45 -0400
-Subject: [PATCH 2/4] Make PolkitUnixProcess also record the uid of the
- process
-
-This is needed to avoid possible TOCTTOU issues since a process can
-change both its real uid and effective uid.
-
-Signed-off-by: David Zeuthen <davidz@redhat.com>
----
- docs/polkit/polkit-1-sections.txt |    7 +-
- src/polkit/polkitsubject.c        |   25 +++-
- src/polkit/polkitunixprocess.c    |  346 +++++++++++++++++++++++++------------
- src/polkit/polkitunixprocess.h    |   18 ++-
- 4 files changed, 278 insertions(+), 118 deletions(-)
-
-diff --git a/docs/polkit/polkit-1-sections.txt b/docs/polkit/polkit-1-sections.txt
-index 12141e3..9f4fcf8 100644
---- a/docs/polkit/polkit-1-sections.txt
-+++ b/docs/polkit/polkit-1-sections.txt
-@@ -145,10 +145,13 @@ POLKIT_UNIX_SESSION_GET_CLASS
- PolkitUnixProcess
- polkit_unix_process_new
- polkit_unix_process_new_full
-+polkit_unix_process_new_for_owner
-+polkit_unix_process_set_pid
- polkit_unix_process_get_pid
-+polkit_unix_process_set_start_time
- polkit_unix_process_get_start_time
--polkit_unix_process_set_pid
--polkit_unix_process_get_owner
-+polkit_unix_process_set_uid
-+polkit_unix_process_get_uid
- <SUBSECTION Standard>
- PolkitUnixProcessClass
- POLKIT_UNIX_PROCESS
-diff --git a/src/polkit/polkitsubject.c b/src/polkit/polkitsubject.c
-index 577afec..d2c4c20 100644
---- a/src/polkit/polkitsubject.c
-+++ b/src/polkit/polkitsubject.c
-@@ -238,13 +238,18 @@ polkit_subject_from_string  (const gchar   *str,
-     {
-       gint scanned_pid;
-       guint64 scanned_starttime;
--      if (sscanf (str, "unix-process:%d:%" G_GUINT64_FORMAT, &scanned_pid, &scanned_starttime) == 2)
-+      gint scanned_uid;
-+      if (sscanf (str, "unix-process:%d:%" G_GUINT64_FORMAT ":%d", &scanned_pid, &scanned_starttime, &scanned_uid) == 3)
-+        {
-+          subject = polkit_unix_process_new_for_owner (scanned_pid, scanned_starttime, scanned_uid);
-+        }
-+      else if (sscanf (str, "unix-process:%d:%" G_GUINT64_FORMAT, &scanned_pid, &scanned_starttime) == 2)
-         {
-           subject = polkit_unix_process_new_full (scanned_pid, scanned_starttime);
-         }
-       else if (sscanf (str, "unix-process:%d", &scanned_pid) == 1)
-         {
--          subject = polkit_unix_process_new_full (scanned_pid, 0);
-+          subject = polkit_unix_process_new (scanned_pid);
-           if (polkit_unix_process_get_start_time (POLKIT_UNIX_PROCESS (subject)) == 0)
-             {
-               g_object_unref (subject);
-@@ -297,6 +302,8 @@ polkit_subject_to_gvariant (PolkitSubject *subject)
-                              g_variant_new_uint32 (polkit_unix_process_get_pid (POLKIT_UNIX_PROCESS (subject))));
-       g_variant_builder_add (&builder, "{sv}", "start-time",
-                              g_variant_new_uint64 (polkit_unix_process_get_start_time (POLKIT_UNIX_PROCESS (subject))));
-+      g_variant_builder_add (&builder, "{sv}", "uid",
-+                             g_variant_new_int32 (polkit_unix_process_get_uid (POLKIT_UNIX_PROCESS (subject))));
-     }
-   else if (POLKIT_IS_UNIX_SESSION (subject))
-     {
-@@ -395,6 +402,7 @@ polkit_subject_new_for_gvariant (GVariant  *variant,
-       GVariant *v;
-       guint32 pid;
-       guint64 start_time;
-+      gint32 uid;
- 
-       v = lookup_asv (details_gvariant, "pid", G_VARIANT_TYPE_UINT32, error);
-       if (v == NULL)
-@@ -414,7 +422,18 @@ polkit_subject_new_for_gvariant (GVariant  *variant,
-       start_time = g_variant_get_uint64 (v);
-       g_variant_unref (v);
- 
--      ret = polkit_unix_process_new_full (pid, start_time);
-+      v = lookup_asv (details_gvariant, "uid", G_VARIANT_TYPE_INT32, error);
-+      if (v != NULL)
-+        {
-+          uid = g_variant_get_int32 (v);
-+          g_variant_unref (v);
-+        }
-+      else
-+        {
-+          uid = -1;
-+        }
-+
-+      ret = polkit_unix_process_new_for_owner (pid, start_time, uid);
-     }
-   else if (g_strcmp0 (kind, "unix-session") == 0)
-     {
-diff --git a/src/polkit/polkitunixprocess.c b/src/polkit/polkitunixprocess.c
-index 876da69..913be3a 100644
---- a/src/polkit/polkitunixprocess.c
-+++ b/src/polkit/polkitunixprocess.c
-@@ -62,6 +62,7 @@ struct _PolkitUnixProcess
- 
-   gint pid;
-   guint64 start_time;
-+  gint uid;
- };
- 
- struct _PolkitUnixProcessClass
-@@ -74,6 +75,7 @@ enum
-   PROP_0,
-   PROP_PID,
-   PROP_START_TIME,
-+  PROP_UID
- };
- 
- static void subject_iface_init (PolkitSubjectIface *subject_iface);
-@@ -81,6 +83,9 @@ static void subject_iface_init (PolkitSubjectIface *subject_iface);
- static guint64 get_start_time_for_pid (gint    pid,
-                                        GError **error);
- 
-+static gint _polkit_unix_process_get_owner (PolkitUnixProcess  *process,
-+                                            GError            **error);
-+
- #ifdef HAVE_FREEBSD
- static gboolean get_kinfo_proc (gint pid, struct kinfo_proc *p);
- #endif
-@@ -92,6 +97,7 @@ G_DEFINE_TYPE_WITH_CODE (PolkitUnixProcess, polkit_unix_process, G_TYPE_OBJECT,
- static void
- polkit_unix_process_init (PolkitUnixProcess *unix_process)
- {
-+  unix_process->uid = -1;
- }
- 
- static void
-@@ -108,6 +114,10 @@ polkit_unix_process_get_property (GObject    *object,
-       g_value_set_int (value, unix_process->pid);
-       break;
- 
-+    case PROP_UID:
-+      g_value_set_int (value, unix_process->uid);
-+      break;
-+
-     case PROP_START_TIME:
-       g_value_set_uint64 (value, unix_process->start_time);
-       break;
-@@ -132,6 +142,14 @@ polkit_unix_process_set_property (GObject      *object,
-       polkit_unix_process_set_pid (unix_process, g_value_get_int (value));
-       break;
- 
-+    case PROP_UID:
-+      polkit_unix_process_set_uid (unix_process, g_value_get_int (value));
-+      break;
-+
-+    case PROP_START_TIME:
-+      polkit_unix_process_set_start_time (unix_process, g_value_get_uint64 (value));
-+      break;
-+
-     default:
-       G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
-       break;
-@@ -139,12 +157,39 @@ polkit_unix_process_set_property (GObject      *object,
- }
- 
- static void
-+polkit_unix_process_constructed (GObject *object)
-+{
-+  PolkitUnixProcess *process = POLKIT_UNIX_PROCESS (object);
-+
-+  /* sets start_time and uid in case they are unset */
-+
-+  if (process->start_time == 0)
-+    process->start_time = get_start_time_for_pid (process->pid, NULL);
-+
-+  if (process->uid == -1)
-+    {
-+      GError *error;
-+      error = NULL;
-+      process->uid = _polkit_unix_process_get_owner (process, &error);
-+      if (error != NULL)
-+        {
-+          process->uid = -1;
-+          g_error_free (error);
-+        }
-+    }
-+
-+  if (G_OBJECT_CLASS (polkit_unix_process_parent_class)->constructed != NULL)
-+    G_OBJECT_CLASS (polkit_unix_process_parent_class)->constructed (object);
-+}
-+
-+static void
- polkit_unix_process_class_init (PolkitUnixProcessClass *klass)
- {
-   GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
- 
-   gobject_class->get_property = polkit_unix_process_get_property;
-   gobject_class->set_property = polkit_unix_process_set_property;
-+  gobject_class->constructed =  polkit_unix_process_constructed;
- 
-   /**
-    * PolkitUnixProcess:pid:
-@@ -156,7 +201,7 @@ polkit_unix_process_class_init (PolkitUnixProcessClass *klass)
-                                    g_param_spec_int ("pid",
-                                                      "Process ID",
-                                                      "The UNIX process ID",
--                                                     -1,
-+                                                     0,
-                                                      G_MAXINT,
-                                                      0,
-                                                      G_PARAM_CONSTRUCT |
-@@ -166,6 +211,27 @@ polkit_unix_process_class_init (PolkitUnixProcessClass *klass)
-                                                      G_PARAM_STATIC_NICK));
- 
-   /**
-+   * PolkitUnixProcess:uid:
-+   *
-+   * The UNIX user id of the process or -1 if unknown.
-+   *
-+   * Note that this is the real user-id, not the effective user-id.
-+   */
-+  g_object_class_install_property (gobject_class,
-+                                   PROP_UID,
-+                                   g_param_spec_int ("uid",
-+                                                     "User ID",
-+                                                     "The UNIX user ID",
-+                                                     -1,
-+                                                     G_MAXINT,
-+                                                     -1,
-+                                                     G_PARAM_CONSTRUCT |
-+                                                     G_PARAM_READWRITE |
-+                                                     G_PARAM_STATIC_NAME |
-+                                                     G_PARAM_STATIC_BLURB |
-+                                                     G_PARAM_STATIC_NICK));
-+
-+  /**
-    * PolkitUnixProcess:start-time:
-    *
-    * The start time of the process.
-@@ -178,7 +244,8 @@ polkit_unix_process_class_init (PolkitUnixProcessClass *klass)
-                                                         0,
-                                                         G_MAXUINT64,
-                                                         0,
--                                                        G_PARAM_READABLE |
-+                                                        G_PARAM_CONSTRUCT |
-+                                                        G_PARAM_READWRITE |
-                                                         G_PARAM_STATIC_NAME |
-                                                         G_PARAM_STATIC_BLURB |
-                                                         G_PARAM_STATIC_NICK));
-@@ -186,113 +253,50 @@ polkit_unix_process_class_init (PolkitUnixProcessClass *klass)
- }
- 
- /**
-- * polkit_unix_process_get_pid:
-+ * polkit_unix_process_get_uid:
-  * @process: A #PolkitUnixProcess.
-  *
-- * Gets the process id for @process.
-+ * Gets the user id for @process. Note that this is the real user-id,
-+ * not the effective user-id.
-  *
-- * Returns: The process id for @process.
-+ * Returns: The user id for @process or -1 if unknown.
-  */
- gint
--polkit_unix_process_get_pid (PolkitUnixProcess *process)
-+polkit_unix_process_get_uid (PolkitUnixProcess *process)
- {
--  g_return_val_if_fail (POLKIT_IS_UNIX_PROCESS (process), 0);
--  return process->pid;
-+  g_return_val_if_fail (POLKIT_IS_UNIX_PROCESS (process), -1);
-+  return process->uid;
- }
- 
- /**
-- * polkit_unix_process_get_owner:
-+ * polkit_unix_process_set_uid:
-  * @process: A #PolkitUnixProcess.
-- * @error: (allow-none): Return location for error or %NULL.
-+ * @uid: The user id to set for @process or -1 to unset it.
-  *
-- * Gets the uid of the owner of @process.
-+ * Sets the (real, not effective) user id for @process.
-+ */
-+void
-+polkit_unix_process_set_uid (PolkitUnixProcess *process,
-+                             gint               uid)
-+{
-+  g_return_if_fail (POLKIT_IS_UNIX_PROCESS (process));
-+  g_return_if_fail (uid >= -1);
-+  process->uid = uid;
-+}
-+
-+/**
-+ * polkit_unix_process_get_pid:
-+ * @process: A #PolkitUnixProcess.
-  *
-- * Note that this returns the real user-id (not the effective user-id) of @process.
-+ * Gets the process id for @process.
-  *
-- * Returns: The UNIX user id of the owner for @process or 0 if @error is set.
-- **/
-+ * Returns: The process id for @process.
-+ */
- gint
--polkit_unix_process_get_owner (PolkitUnixProcess  *process,
--                               GError            **error)
-+polkit_unix_process_get_pid (PolkitUnixProcess *process)
- {
--  gint result;
--  gchar *contents;
--  gchar **lines;
--#ifdef HAVE_FREEBSD
--  struct kinfo_proc p;
--#else
--  gchar filename[64];
--  guint n;
--#endif
--
-   g_return_val_if_fail (POLKIT_IS_UNIX_PROCESS (process), 0);
--  g_return_val_if_fail (error == NULL || *error == NULL, 0);
--
--  result = 0;
--  lines = NULL;
--  contents = NULL;
--
--#ifdef HAVE_FREEBSD
--  if (get_kinfo_proc (process->pid, &p) == 0)
--    {
--      g_set_error (error,
--                   POLKIT_ERROR,
--                   POLKIT_ERROR_FAILED,
--                   "get_kinfo_proc() failed for pid %d: %s",
--                   process->pid,
--                   g_strerror (errno));
--      goto out;
--    }
--
--  result = p.ki_uid;
--#else
--
--  /* see 'man proc' for layout of the status file
--   *
--   * Uid, Gid: Real, effective, saved set,  and  file  system  UIDs (GIDs).
--   */
--  g_snprintf (filename, sizeof filename, "/proc/%d/status", process->pid);
--  if (!g_file_get_contents (filename,
--                            &contents,
--                            NULL,
--                            error))
--    {
--      goto out;
--    }
--  lines = g_strsplit (contents, "\n", -1);
--  for (n = 0; lines != NULL && lines[n] != NULL; n++)
--    {
--      gint real_uid, effective_uid;
--      if (!g_str_has_prefix (lines[n], "Uid:"))
--        continue;
--      if (sscanf (lines[n] + 4, "%d %d", &real_uid, &effective_uid) != 2)
--        {
--          g_set_error (error,
--                       POLKIT_ERROR,
--                       POLKIT_ERROR_FAILED,
--                       "Unexpected line `%s' in file %s",
--                       lines[n],
--                       filename);
--          goto out;
--        }
--      else
--        {
--          result = real_uid;
--          goto out;
--        }
--    }
--
--  g_set_error (error,
--               POLKIT_ERROR,
--               POLKIT_ERROR_FAILED,
--               "Didn't find any line starting with `Uid:' in file %s",
--               filename);
--#endif
--
--out:
--  g_strfreev (lines);
--  g_free (contents);
--  return result;
-+  return process->pid;
- }
- 
- /**
-@@ -311,6 +315,21 @@ polkit_unix_process_get_start_time (PolkitUnixProcess *process)
- }
- 
- /**
-+ * polkit_unix_process_set_start_time:
-+ * @process: A #PolkitUnixProcess.
-+ * @start_time: The start time for @pid.
-+ *
-+ * Set the start time of @process.
-+ */
-+void
-+polkit_unix_process_set_start_time (PolkitUnixProcess *process,
-+                                    guint64            start_time)
-+{
-+  g_return_if_fail (POLKIT_IS_UNIX_PROCESS (process));
-+  process->start_time = start_time;
-+}
-+
-+/**
-  * polkit_unix_process_set_pid:
-  * @process: A #PolkitUnixProcess.
-  * @pid: A process id.
-@@ -323,18 +342,17 @@ polkit_unix_process_set_pid (PolkitUnixProcess *process,
- {
-   g_return_if_fail (POLKIT_IS_UNIX_PROCESS (process));
-   process->pid = pid;
--  if (pid != (gint) -1)
--    process->start_time = get_start_time_for_pid (pid, NULL);
- }
- 
- /**
-  * polkit_unix_process_new:
-  * @pid: The process id.
-  *
-- * Creates a new #PolkitUnixProcess for @pid. The start time of the
-- * process will be looked up in using e.g. the
-- * <filename>/proc</filename> filesystem depending on the platform in
-- * use.
-+ * Creates a new #PolkitUnixProcess for @pid.
-+ *
-+ * The uid and start time of the process will be looked up in using
-+ * e.g. the <filename>/proc</filename> filesystem depending on the
-+ * platform in use.
-  *
-  * Returns: (transfer full): A #PolkitSubject. Free with g_object_unref().
-  */
-@@ -353,22 +371,42 @@ polkit_unix_process_new (gint pid)
-  *
-  * Creates a new #PolkitUnixProcess object for @pid and @start_time.
-  *
-+ * The uid of the process will be looked up in using e.g. the
-+ * <filename>/proc</filename> filesystem depending on the platform in
-+ * use.
-+ *
-  * Returns: (transfer full): A #PolkitSubject. Free with g_object_unref().
-  */
- PolkitSubject *
- polkit_unix_process_new_full (gint pid,
-                               guint64 start_time)
- {
--  PolkitUnixProcess *process;
--
--  process = POLKIT_UNIX_PROCESS (polkit_unix_process_new ((gint) -1));
--  process->pid = pid;
--  if (start_time != 0)
--    process->start_time = start_time;
--  else
--    process->start_time = get_start_time_for_pid (pid, NULL);
-+  return POLKIT_SUBJECT (g_object_new (POLKIT_TYPE_UNIX_PROCESS,
-+                                       "pid", pid,
-+                                       "start_time", start_time,
-+                                       NULL));
-+}
- 
--  return POLKIT_SUBJECT (process);
-+/**
-+ * polkit_unix_process_new_for_owner:
-+ * @pid: The process id.
-+ * @start_time: The start time for @pid or 0 to look it up in e.g. <filename>/proc</filename>.
-+ * @uid: The (real, not effective) uid of the owner of @pid or -1 to look it up in e.g. <filename>/proc</filename>.
-+ *
-+ * Creates a new #PolkitUnixProcess object for @pid, @start_time and @uid.
-+ *
-+ * Returns: (transfer full): A #PolkitSubject. Free with g_object_unref().
-+ */
-+PolkitSubject *
-+polkit_unix_process_new_for_owner (gint    pid,
-+                                   guint64 start_time,
-+                                   gint    uid)
-+{
-+  return POLKIT_SUBJECT (g_object_new (POLKIT_TYPE_UNIX_PROCESS,
-+                                       "pid", pid,
-+                                       "start_time", start_time,
-+                                       "uid", uid,
-+                                       NULL));
- }
- 
- static guint
-@@ -616,3 +654,95 @@ out:
- 
-   return start_time;
- }
-+
-+static gint
-+_polkit_unix_process_get_owner (PolkitUnixProcess  *process,
-+                                GError            **error)
-+{
-+  gint result;
-+  gchar *contents;
-+  gchar **lines;
-+#ifdef HAVE_FREEBSD
-+  struct kinfo_proc p;
-+#else
-+  gchar filename[64];
-+  guint n;
-+#endif
-+
-+  g_return_val_if_fail (POLKIT_IS_UNIX_PROCESS (process), 0);
-+  g_return_val_if_fail (error == NULL || *error == NULL, 0);
-+
-+  result = 0;
-+  lines = NULL;
-+  contents = NULL;
-+
-+#ifdef HAVE_FREEBSD
-+  if (get_kinfo_proc (process->pid, &p) == 0)
-+    {
-+      g_set_error (error,
-+                   POLKIT_ERROR,
-+                   POLKIT_ERROR_FAILED,
-+                   "get_kinfo_proc() failed for pid %d: %s",
-+                   process->pid,
-+                   g_strerror (errno));
-+      goto out;
-+    }
-+
-+  result = p.ki_uid;
-+#else
-+
-+  /* see 'man proc' for layout of the status file
-+   *
-+   * Uid, Gid: Real, effective, saved set,  and  file  system  UIDs (GIDs).
-+   */
-+  g_snprintf (filename, sizeof filename, "/proc/%d/status", process->pid);
-+  if (!g_file_get_contents (filename,
-+                            &contents,
-+                            NULL,
-+                            error))
-+    {
-+      goto out;
-+    }
-+  lines = g_strsplit (contents, "\n", -1);
-+  for (n = 0; lines != NULL && lines[n] != NULL; n++)
-+    {
-+      gint real_uid, effective_uid;
-+      if (!g_str_has_prefix (lines[n], "Uid:"))
-+        continue;
-+      if (sscanf (lines[n] + 4, "%d %d", &real_uid, &effective_uid) != 2)
-+        {
-+          g_set_error (error,
-+                       POLKIT_ERROR,
-+                       POLKIT_ERROR_FAILED,
-+                       "Unexpected line `%s' in file %s",
-+                       lines[n],
-+                       filename);
-+          goto out;
-+        }
-+      else
-+        {
-+          result = real_uid;
-+          goto out;
-+        }
-+    }
-+
-+  g_set_error (error,
-+               POLKIT_ERROR,
-+               POLKIT_ERROR_FAILED,
-+               "Didn't find any line starting with `Uid:' in file %s",
-+               filename);
-+#endif
-+
-+out:
-+  g_strfreev (lines);
-+  g_free (contents);
-+  return result;
-+}
-+
-+/* deprecated public method */
-+gint
-+polkit_unix_process_get_owner (PolkitUnixProcess  *process,
-+                               GError            **error)
-+{
-+  return _polkit_unix_process_get_owner (process, error);
-+}
-diff --git a/src/polkit/polkitunixprocess.h b/src/polkit/polkitunixprocess.h
-index b88cd03..531a57d 100644
---- a/src/polkit/polkitunixprocess.h
-+++ b/src/polkit/polkitunixprocess.h
-@@ -47,16 +47,24 @@ typedef struct _PolkitUnixProcess PolkitUnixProcess;
- typedef struct _PolkitUnixProcessClass PolkitUnixProcessClass;
- 
- GType           polkit_unix_process_get_type       (void) G_GNUC_CONST;
--PolkitSubject  *polkit_unix_process_new            (gint pid);
--PolkitSubject  *polkit_unix_process_new_full       (gint pid,
--                                                    guint64 start_time);
--
-+PolkitSubject  *polkit_unix_process_new            (gint               pid);
-+PolkitSubject  *polkit_unix_process_new_full       (gint               pid,
-+                                                    guint64            start_time);
-+PolkitSubject  *polkit_unix_process_new_for_owner  (gint               pid,
-+                                                    guint64            start_time,
-+                                                    gint               uid);
- gint            polkit_unix_process_get_pid        (PolkitUnixProcess *process);
- guint64         polkit_unix_process_get_start_time (PolkitUnixProcess *process);
-+gint            polkit_unix_process_get_uid        (PolkitUnixProcess *process);
- void            polkit_unix_process_set_pid        (PolkitUnixProcess *process,
-                                                     gint               pid);
-+void            polkit_unix_process_set_uid        (PolkitUnixProcess *process,
-+                                                    gint               uid);
-+void            polkit_unix_process_set_start_time (PolkitUnixProcess *process,
-+                                                    guint64            start_time);
-+
- gint            polkit_unix_process_get_owner      (PolkitUnixProcess  *process,
--                                                    GError            **error);
-+                                                    GError            **error) G_GNUC_DEPRECATED_FOR (polkit_unix_process_get_uid);
- 
- G_END_DECLS
- 
--- 
-1.7.4.4
-
diff --git a/source/l/polkit/CVE-2011-1485/0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch b/source/l/polkit/CVE-2011-1485/0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch
deleted file mode 100644
index 90d9352e..00000000
--- a/source/l/polkit/CVE-2011-1485/0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From c23d74447c7615dc74dae259f0fc3688ec988867 Mon Sep 17 00:00:00 2001
-From: David Zeuthen <davidz@redhat.com>
-Date: Fri, 1 Apr 2011 12:12:27 -0400
-Subject: [PATCH 3/4] Use polkit_unix_process_get_uid() to get the owner of a
- process
-
-This avoids a TOCTTOU problem.
-
-Signed-off-by: David Zeuthen <davidz@redhat.com>
----
- src/polkitbackend/polkitbackendsessionmonitor.c |   11 ++++++-----
- 1 files changed, 6 insertions(+), 5 deletions(-)
-
-diff --git a/src/polkitbackend/polkitbackendsessionmonitor.c b/src/polkitbackend/polkitbackendsessionmonitor.c
-index 495f752..9c331b6 100644
---- a/src/polkitbackend/polkitbackendsessionmonitor.c
-+++ b/src/polkitbackend/polkitbackendsessionmonitor.c
-@@ -293,14 +293,15 @@ polkit_backend_session_monitor_get_user_for_subject (PolkitBackendSessionMonitor
- 
-   if (POLKIT_IS_UNIX_PROCESS (subject))
-     {
--      local_error = NULL;
--      uid = polkit_unix_process_get_owner (POLKIT_UNIX_PROCESS (subject), &local_error);
--      if (local_error != NULL)
-+      uid = polkit_unix_process_get_uid (POLKIT_UNIX_PROCESS (subject));
-+      if ((gint) uid == -1)
-         {
--          g_propagate_prefixed_error (error, local_error, "Error getting user for process: ");
-+          g_set_error (error,
-+                       POLKIT_ERROR,
-+                       POLKIT_ERROR_FAILED,
-+                       "Unix process subject does not have uid set");
-           goto out;
-         }
--
-       ret = polkit_unix_user_new (uid);
-     }
-   else if (POLKIT_IS_SYSTEM_BUS_NAME (subject))
--- 
-1.7.4.4
-
diff --git a/source/l/polkit/CVE-2011-1485/0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch b/source/l/polkit/CVE-2011-1485/0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch
deleted file mode 100644
index 8572f732..00000000
--- a/source/l/polkit/CVE-2011-1485/0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 3b12cfac29dddd27f1f166a7574d8374cc1dccf2 Mon Sep 17 00:00:00 2001
-From: David Zeuthen <davidz@redhat.com>
-Date: Fri, 1 Apr 2011 12:13:15 -0400
-Subject: [PATCH 4/4] pkexec: Avoid TOCTTOU problems with parent process
-
-In a nutshell, the parent process may change its uid (either real- or
-effective uid) after launching pkexec. It can do this by exec()'ing
-e.g. a setuid root program.
-
-To avoid this problem, just use the uid the parent process had when it
-executed pkexec. This happens to be the same uid of the pkexec process
-itself.
-
-Additionally, remove some dubious code that allowed pkexec to continue
-when the parent process died as there is no reason to support
-something like that. Also ensure that the pkexec process is killed if
-the parent process dies.
-
-This problem was pointed out by Neel Mehta <nmehta@google.com>.
-
-Signed-off-by: David Zeuthen <davidz@redhat.com>
----
- src/programs/pkexec.c |   66 +++++++++++++++++++++++++++++--------------------
- 1 files changed, 39 insertions(+), 27 deletions(-)
-
-diff --git a/src/programs/pkexec.c b/src/programs/pkexec.c
-index 9217954..3e656be 100644
---- a/src/programs/pkexec.c
-+++ b/src/programs/pkexec.c
-@@ -35,6 +35,10 @@
- #include <pwd.h>
- #include <errno.h>
- 
-+#ifdef __linux__
-+#include <sys/prctl.h>
-+#endif
-+
- #include <glib/gi18n.h>
- 
- #ifdef POLKIT_AUTHFW_PAM
-@@ -423,7 +427,6 @@ main (int argc, char *argv[])
-   GPtrArray *saved_env;
-   gchar *opt_user;
-   pid_t pid_of_caller;
--  uid_t uid_of_caller;
-   gpointer local_agent_handle;
- 
-   ret = 127;
-@@ -598,40 +601,49 @@ main (int argc, char *argv[])
-    */
-   g_type_init ();
- 
--  /* now check if the program that invoked us is authorized */
-+  /* make sure we are nuked if the parent process dies */
-+#ifdef __linux__
-+  if (prctl (PR_SET_PDEATHSIG, SIGTERM) != 0)
-+    {
-+      g_printerr ("prctl(PR_SET_PDEATHSIG, SIGTERM) failed: %s\n", g_strerror (errno));
-+      goto out;
-+    }
-+#else
-+#warning "Please add OS specific code to catch when the parent dies"
-+#endif
-+
-+  /* Figure out the parent process */
-   pid_of_caller = getppid ();
-   if (pid_of_caller == 1)
-     {
-       /* getppid() can return 1 if the parent died (meaning that we are reaped
--       * by /sbin/init); get process group leader instead - for example, this
--       * happens when launching via gnome-panel (alt+f2, then 'pkexec gedit').
-+       * by /sbin/init); In that case we simpy bail.
-        */
--      pid_of_caller = getpgrp ();
--    }
--
--  subject = polkit_unix_process_new (pid_of_caller);
--  if (subject == NULL)
--    {
--      g_printerr ("No such process for pid %d: %s\n", (gint) pid_of_caller, error->message);
--      g_error_free (error);
-+      g_printerr ("Refusing to render service to dead parents.\n");
-       goto out;
-     }
- 
--  /* paranoia: check that the uid of pid_of_caller matches getuid() */
--  error = NULL;
--  uid_of_caller = polkit_unix_process_get_owner (POLKIT_UNIX_PROCESS (subject),
--                                                 &error);
--  if (error != NULL)
--    {
--      g_printerr ("Error determing pid of caller (pid %d): %s\n", (gint) pid_of_caller, error->message);
--      g_error_free (error);
--      goto out;
--    }
--  if (uid_of_caller != getuid ())
--    {
--      g_printerr ("User of caller (%d) does not match our uid (%d)\n", uid_of_caller, getuid ());
--      goto out;
--    }
-+  /* This process we want to check an authorization for is the process
-+   * that launched us - our parent process.
-+   *
-+   * At the time the parent process fork()'ed and exec()'ed us, the
-+   * process had the same real-uid that we have now. So we use this
-+   * real-uid instead of of looking it up to avoid TOCTTOU issues
-+   * (consider the parent process exec()'ing a setuid helper).
-+   *
-+   * On the other hand, the monotonic process start-time is guaranteed
-+   * to never change so it's safe to look that up given only the PID
-+   * since we are guaranteed to be nuked if the parent goes away
-+   * (cf. the prctl(2) call above).
-+   */
-+  subject = polkit_unix_process_new_for_owner (pid_of_caller,
-+                                               0, /* 0 means "look up start-time in /proc" */
-+                                               getuid ());
-+  /* really double-check the invariants guaranteed by the PolkitUnixProcess class */
-+  g_assert (subject != NULL);
-+  g_assert (polkit_unix_process_get_pid (POLKIT_UNIX_PROCESS (subject)) == pid_of_caller);
-+  g_assert (polkit_unix_process_get_uid (POLKIT_UNIX_PROCESS (subject)) >= 0);
-+  g_assert (polkit_unix_process_get_start_time (POLKIT_UNIX_PROCESS (subject)) > 0);
- 
-   error = NULL;
-   authority = polkit_authority_get_sync (NULL /* GCancellable* */, &error);
--- 
-1.7.4.4
-
diff --git a/source/l/polkit/doinst.sh b/source/l/polkit/doinst.sh
new file mode 100644
index 00000000..bce9ca90
--- /dev/null
+++ b/source/l/polkit/doinst.sh
@@ -0,0 +1,13 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/polkit-1/localauthority/50-local.d/20-plugdev-group-mount-override.pkla.new
+config etc/polkit-1/localauthority/50-local.d/10-org.freedesktop.NetworkManager.pkla.new
diff --git a/source/l/polkit/polkit.SlackBuild b/source/l/polkit/polkit.SlackBuild
index 7aa40f5d..a4bb9fc1 100755
--- a/source/l/polkit/polkit.SlackBuild
+++ b/source/l/polkit/polkit.SlackBuild
@@ -2,7 +2,7 @@
 
 # Copyright 2009, 2011  Robby Workman, Northport, Alabama, USA
 # Copyright 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -25,7 +25,7 @@
 
 PKGNAM=polkit
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -72,12 +72,6 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# https://bugzilla.redhat.com/show_bug.cgi?id=692922
-patch -p1 < $CWD/CVE-2011-1485/0001-PolkitUnixProcess-Clarify-that-the-real-uid-is-retur.patch || exit 1
-patch -p1 < $CWD/CVE-2011-1485/0002-Make-PolkitUnixProcess-also-record-the-uid-of-the-pr.patch || exit 1
-patch -p1 < $CWD/CVE-2011-1485/0003-Use-polkit_unix_process_get_uid-to-get-the-owner-of-.patch || exit 1
-patch -p1 < $CWD/CVE-2011-1485/0004-pkexec-Avoid-TOCTTOU-problems-with-parent-process.patch || exit 1
-
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -90,7 +84,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-gtk-doc \
   --mandir=/usr/man \
   --disable-static \
-  --disable-introspection \
+  --enable-introspection \
   --with-authfw=shadow \
   --enable-verbose-mode \
   --with-os-type=Slackware \
@@ -109,6 +103,10 @@ CXXFLAGS="$SLKCFLAGS" \
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# Add default policy files for udisks2 and NetworkManager events:
+cat $CWD/20-plugdev-group-mount-override.pkla > $PKG/etc/polkit-1/localauthority/50-local.d/20-plugdev-group-mount-override.pkla.new
+cat $CWD/10-org.freedesktop.NetworkManager.pkla > $PKG/etc/polkit-1/localauthority/50-local.d/10-org.freedesktop.NetworkManager.pkla.new
+
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
@@ -131,12 +129,20 @@ fi
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \
+  AUTHORS COPYING HACKING INSTALL NEWS README \
   $PKG/usr/doc/$PKGNAM-$VERSION
-( cd $PKG/usr/doc/$PKGNAM-$VERSION; ln -s ../../share/gtk-doc/html/polkit-1 html
-)
+( cd $PKG/usr/doc/$PKGNAM-$VERSION; ln -s ../../share/gtk-doc/html/polkit-1 html )
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
+zcat $CWD/doinst.sh > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
diff --git a/source/l/poppler-data/poppler-data.SlackBuild b/source/l/poppler-data/poppler-data.SlackBuild
index 1c77ed9b..c9937e7f 100755
--- a/source/l/poppler-data/poppler-data.SlackBuild
+++ b/source/l/poppler-data/poppler-data.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -53,6 +53,14 @@ cp -a \
   COPYING* README \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/l/poppler/poppler.SlackBuild b/source/l/poppler/poppler.SlackBuild
index dcf3e899..b2e5955a 100755
--- a/source/l/poppler/poppler.SlackBuild
+++ b/source/l/poppler/poppler.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -61,6 +61,10 @@ cd $TMP || exit 1
 rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
+
+# Fix printing of some pdf files:
+zcat $CWD/poppler_xyscale.patch.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -87,6 +91,7 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress and link manpages, if any:
 if [ -d $PKG/usr/man ]; then
   ( cd $PKG/usr/man
     for manpagedir in $(find . -type d -name "man*") ; do
@@ -95,7 +100,7 @@ if [ -d $PKG/usr/man ]; then
           ln -s $( readlink $eachpage ).gz $eachpage.gz
           rm $eachpage
         done
-        gzip -9 *.*
+        gzip -9 *.?
       )
     done
   )
diff --git a/source/l/poppler/poppler_xyscale.patch b/source/l/poppler/poppler_xyscale.patch
new file mode 100644
index 00000000..bd23d36c
--- /dev/null
+++ b/source/l/poppler/poppler_xyscale.patch
@@ -0,0 +1,47 @@
+From 36481939e3064de920e49d9d1742a85473a50963 Mon Sep 17 00:00:00 2001
+From: Thomas Freitag <Thomas.Freitag@alfa.de>
+Date: Sun, 22 Jul 2012 16:40:46 +0000
+Subject: Make sure xScale and yScale are always initialized
+
+Bug #52215
+---
+diff --git a/poppler/PSOutputDev.cc b/poppler/PSOutputDev.cc
+index a01a4b3..e15c2e9 100644
+--- a/poppler/PSOutputDev.cc
++++ b/poppler/PSOutputDev.cc
+@@ -3521,6 +3521,7 @@ void PSOutputDev::startPage(int pageNum, GfxState *state) {
+     saveState(NULL);
+   }
+ 
++  xScale = yScale = 1;
+   switch (mode) {
+ 
+   case psModePSOrigPageSizes:
+@@ -3631,8 +3632,6 @@ void PSOutputDev::startPage(int pageNum, GfxState *state) {
+       } else {
+ 	yScale = xScale;
+       }
+-    } else {
+-      xScale = yScale = 1;
+     }
+     // deal with odd bounding boxes or clipping
+     if (clipLLX0 < clipURX0 && clipLLY0 < clipURY0) {
+@@ -3694,7 +3693,6 @@ void PSOutputDev::startPage(int pageNum, GfxState *state) {
+     if (tx != 0 || ty != 0) {
+       writePSFmt("{0:.6g} {1:.6g} translate\n", tx, ty);
+     }
+-    xScale = yScale = 1;
+     break;
+ 
+   case psModeForm:
+@@ -3702,7 +3700,6 @@ void PSOutputDev::startPage(int pageNum, GfxState *state) {
+     writePS("begin xpdf begin\n");
+     writePS("pdfStartPage\n");
+     tx = ty = 0;
+-    xScale = yScale = 1;
+     rotate = 0;
+     break;
+   }
+--
+cgit v0.9.0.2-2-gbebe
+
diff --git a/source/l/pycairo/pycairo.SlackBuild b/source/l/pycairo/pycairo.SlackBuild
index 1d072b74..365745b8 100755
--- a/source/l/pycairo/pycairo.SlackBuild
+++ b/source/l/pycairo/pycairo.SlackBuild
@@ -27,7 +27,7 @@
 PKGNAM=pycairo
 SRCNAM=py2cairo
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/l/pycurl/pycurl.SlackBuild b/source/l/pycurl/pycurl.SlackBuild
new file mode 100755
index 00000000..4d9c4339
--- /dev/null
+++ b/source/l/pycurl/pycurl.SlackBuild
@@ -0,0 +1,84 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=pycurl
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+python setup.py build || exit 1
+python setup.py install --root=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "shared object" -e "executable" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a COPYING* NEWS README TODO \
+  doc/* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+rm -rf $PKG/usr/share/doc/pycurl
+rmdir $PKG/usr/share/doc
+rmdir $PKG/usr/share
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/pycurl/slack-desc b/source/l/pycurl/slack-desc
new file mode 100644
index 00000000..0ba82db1
--- /dev/null
+++ b/source/l/pycurl/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler----------------------------------------------|
+pycurl: pycurl (Python interface to cURL library)
+pycurl:
+pycurl: PycURL is a Python interface to libcurl.  PycURL can be used
+pycurl: to fetch objects identified by a URL from a Python program,
+pycurl: similar to the urllib Python module.  PycURL is mature, very
+pycurl: fast, and supports a lot of features.
+pycurl:
+pycurl: Homepage:  http://pycurl.sourceforge.net
+pycurl:
+pycurl:
+pycurl:
diff --git a/source/l/pygobject/pygobject.SlackBuild b/source/l/pygobject/pygobject.SlackBuild
index 064ca3c1..e39feacb 100755
--- a/source/l/pygobject/pygobject.SlackBuild
+++ b/source/l/pygobject/pygobject.SlackBuild
@@ -24,7 +24,7 @@
 
 PKGNAM=pygobject
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -63,8 +63,11 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP 
 rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
 cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/pygobject.flags.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -72,8 +75,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-zcat $CWD/pygobject.fix.no.introspection.crash.diff.gz | patch -p1 --verbose || exit 1
-
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
diff --git a/source/l/pygobject/pygobject.fix.no.introspection.crash.diff b/source/l/pygobject/pygobject.fix.no.introspection.crash.diff
deleted file mode 100644
index df59b482..00000000
--- a/source/l/pygobject/pygobject.fix.no.introspection.crash.diff
+++ /dev/null
@@ -1,22 +0,0 @@
-From 97774cb149c5b03d5ef82a5af3f19e2ce4d79d0b Mon Sep 17 00:00:00 2001
-From: John (J5) Palmieri <johnp@redhat.com>
-Date: Mon, 04 Oct 2010 16:43:31 +0000
-Subject: return NULL instead of -1 which fixes crash when introspection is turned off
-
-* see https://bugzilla.gnome.org/show_bug.cgi?id=631158
----
-diff --git a/gi/pygi.h b/gi/pygi.h
-index 551bb6f..da71d28 100644
---- a/gi/pygi.h
-+++ b/gi/pygi.h
-@@ -155,7 +155,7 @@ static inline PyObject *
- pygi_get_property_value (PyGObject *instance,
-                          const gchar *attr_name)
- {
--    return -1;
-+    return NULL;
- }
- 
- static inline gint
---
-cgit v0.8.3.1
diff --git a/source/l/pygobject/pygobject.flags.diff b/source/l/pygobject/pygobject.flags.diff
new file mode 100644
index 00000000..6a0e99e1
--- /dev/null
+++ b/source/l/pygobject/pygobject.flags.diff
@@ -0,0 +1,49 @@
+From 42d01f060c5d764baa881d13c103d68897163a49 Mon Sep 17 00:00:00 2001
+From: Ryan Lortie <desrt@desrt.ca>
+Date: Mon, 12 Mar 2012 16:44:14 -0400
+Subject: [PATCH] gio-types.defs: change some enums to flags
+
+These flags types were originally incorrectly handled in glib as being
+enums.  That bug was fixed, but they're still enums here, leading to
+warnings about the mismatch.
+
+Change them to flags.
+
+https://bugzilla.gnome.org/show_bug.cgi?id=668522
+---
+ gio/gio-types.defs |    6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/gio/gio-types.defs b/gio/gio-types.defs
+index 331e0bc..7eee5c8 100644
+--- a/gio/gio-types.defs
++++ b/gio/gio-types.defs
+@@ -526,7 +526,7 @@
+   )
+ )
+ 
+-(define-enum MountMountFlags
++(define-flags MountMountFlags
+   (in-module "gio")
+   (c-name "GMountMountFlags")
+   (gtype-id "G_TYPE_MOUNT_MOUNT_FLAGS")
+@@ -545,7 +545,7 @@
+   )
+ )
+ 
+-(define-enum DriveStartFlags
++(define-flags DriveStartFlags
+   (in-module "gio")
+   (c-name "GDriveStartFlags")
+   (gtype-id "G_TYPE_DRIVE_START_FLAGS")
+@@ -770,7 +770,7 @@
+   )
+ )
+ 
+-(define-enum SocketMsgFlags
++(define-flags SocketMsgFlags
+   (in-module "gio")
+   (c-name "GSocketMsgFlags")
+   (gtype-id "G_TYPE_SOCKET_MSG_FLAGS")
+-- 
+1.7.9.1
diff --git a/source/l/pygtk/pygtk.SlackBuild b/source/l/pygtk/pygtk.SlackBuild
index 7823f4dd..b4170da8 100755
--- a/source/l/pygtk/pygtk.SlackBuild
+++ b/source/l/pygtk/pygtk.SlackBuild
@@ -63,7 +63,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP || exit 1
 rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
 cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
diff --git a/source/l/pyrex/pyrex.SlackBuild b/source/l/pyrex/pyrex.SlackBuild
index 42b9f7cc..94b34c2e 100755
--- a/source/l/pyrex/pyrex.SlackBuild
+++ b/source/l/pyrex/pyrex.SlackBuild
@@ -24,7 +24,7 @@
 
 PKGNAM=Pyrex
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/qca-cyrus-sasl/slack-desc b/source/l/qca-cyrus-sasl/slack-desc
index 29585fe9..55bf91d2 100644
--- a/source/l/qca-cyrus-sasl/slack-desc
+++ b/source/l/qca-cyrus-sasl/slack-desc
@@ -5,7 +5,7 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-              |-----handy-ruler---------------------------------------------|
+              |-----handy-ruler------------------------------------------------------|
 qca-cyrus-sasl: qca-cyrus-sasl (Cyrus SASL plugin for QCA)
 qca-cyrus-sasl:
 qca-cyrus-sasl: This plugin provides features based on Cyrus SASL version 2.
diff --git a/source/l/qca-ossl/qca-ossl-openssl-1.0.0.patch b/source/l/qca-ossl/qca-ossl-openssl-1.0.0.patch
new file mode 100644
index 00000000..7c6fa5bd
--- /dev/null
+++ b/source/l/qca-ossl/qca-ossl-openssl-1.0.0.patch
@@ -0,0 +1,155 @@
+diff -ru ../qca-ossl-2.0.0-beta3/CMakeLists.txt ./CMakeLists.txt
+--- ../qca-ossl-2.0.0-beta3/CMakeLists.txt	2007-06-29 23:10:53.000000000 +0200
++++ ./CMakeLists.txt	2010-04-18 04:05:09.000000000 +0200
+@@ -1,5 +1,12 @@
+ # QCA OSSL
+ 
++INCLUDE(CheckFunctionExists)
++SET(CMAKE_REQUIRED_LIBRARIES ${OPENSSL_LIBRARIES})
++CHECK_FUNCTION_EXISTS(EVP_md2 HAVE_OPENSSL_MD2)
++IF (HAVE_OPENSSL_MD2)
++  ADD_DEFINITIONS(-DHAVE_OPENSSL_MD2)
++ENDIF (HAVE_OPENSSL_MD2)
++
+ SET(QCA_OSSL_SOURCES qca-ossl.cpp)
+ 
+ MY_AUTOMOC( QCA_OSSL_SOURCES )
+diff -ru ../qca-ossl-2.0.0-beta3/qca-ossl.cpp ./qca-ossl.cpp
+--- ../qca-ossl-2.0.0-beta3/qca-ossl.cpp	2007-12-11 07:34:57.000000000 +0100
++++ ./qca-ossl.cpp	2010-04-18 04:08:46.000000000 +0200
+@@ -42,6 +42,15 @@
+ #define OSSL_097
+ #endif
+ 
++#if defined(OPENSSL_VERSION_NUMBER) && OPENSSL_VERSION_NUMBER >= 0x10000000L
++// OpenSSL 1.0.0 makes a few changes that aren't very C++ friendly...
++// Among other things, CHECKED_PTR_OF returns a void*, but is used in
++// contexts requiring STACK pointers.
++#undef CHECKED_PTR_OF
++#define CHECKED_PTR_OF(type, p) \
++	            ((_STACK*) (1 ? p : (type*)0))
++#endif
++
+ using namespace QCA;
+ 
+ namespace opensslQCAPlugin {
+@@ -1771,8 +1780,10 @@
+ 			md = EVP_sha1();
+ 		else if(alg == EMSA3_MD5)
+ 			md = EVP_md5();
++#ifdef HAVE_OPENSSL_MD2
+ 		else if(alg == EMSA3_MD2)
+ 			md = EVP_md2();
++#endif
+ 		else if(alg == EMSA3_RIPEMD160)
+ 			md = EVP_ripemd160();
+ 		else if(alg == EMSA3_Raw)
+@@ -1789,8 +1800,10 @@
+ 			md = EVP_sha1();
+ 		else if(alg == EMSA3_MD5)
+ 			md = EVP_md5();
++#ifdef HAVE_OPENSSL_MD2
+ 		else if(alg == EMSA3_MD2)
+ 			md = EVP_md2();
++#endif
+ 		else if(alg == EMSA3_RIPEMD160)
+ 			md = EVP_ripemd160();
+ 		else if(alg == EMSA3_Raw)
+@@ -3385,9 +3398,11 @@
+ 		case NID_md5WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD5;
+ 		    break;
++#ifdef HAVE_OPENSSL_MD2
+ 		case NID_md2WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD2;
+ 		    break;
++#endif
+ 		case NID_ripemd160WithRSA:
+ 		    p.sigalgo = QCA::EMSA3_RIPEMD160;
+ 		    break;
+@@ -3871,9 +3886,11 @@
+ 		case NID_md5WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD5;
+ 		    break;
++#ifdef HAVE_OPENSSL_MD2
+ 		case NID_md2WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD2;
+ 		    break;
++#endif
+ 		case NID_ripemd160WithRSA:
+ 		    p.sigalgo = QCA::EMSA3_RIPEMD160;
+ 		    break;
+@@ -4061,9 +4078,11 @@
+ 		case NID_md5WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD5;
+ 		    break;
++#ifdef HAVE_OPENSSL_MD2
+ 		case NID_md2WithRSAEncryption:
+ 		    p.sigalgo = QCA::EMSA3_MD2;
+ 		    break;
++#endif
+ 		case NID_ripemd160WithRSA:
+ 		    p.sigalgo = QCA::EMSA3_RIPEMD160;
+ 		    break;
+@@ -6582,7 +6601,9 @@
+ 	list += "sha1";
+ 	list += "sha0";
+ 	list += "ripemd160";
++#ifdef HAVE_OPENSSL_MD2
+ 	list += "md2";
++#endif
+ 	list += "md4";
+ 	list += "md5";
+ #ifdef SHA224_DIGEST_LENGTH
+@@ -6597,9 +6618,11 @@
+ #ifdef SHA512_DIGEST_LENGTH
+ 	list += "sha512";
+ #endif
++/*
+ #ifdef OBJ_whirlpool
+ 	list += "whirlpool";
+ #endif
++*/
+ 	return list;
+ }
+ 
+@@ -6757,7 +6780,9 @@
+ 		list += all_hash_types();
+ 		list += all_mac_types();
+ 		list += all_cipher_types();
++#ifdef HAVE_OPENSSL_MD2
+ 		list += "pbkdf1(md2)";
++#endif
+ 		list += "pbkdf1(sha1)";
+ 		list += "pbkdf2(sha1)";
+ 		list += "pkey";
+@@ -6788,8 +6813,10 @@
+ 			return new opensslHashContext( EVP_sha(), this, type);
+ 		else if ( type == "ripemd160" )
+ 			return new opensslHashContext( EVP_ripemd160(), this, type);
++#ifdef HAVE_OPENSSL_MD2
+ 		else if ( type == "md2" )
+ 			return new opensslHashContext( EVP_md2(), this, type);
++#endif
+ 		else if ( type == "md4" )
+ 			return new opensslHashContext( EVP_md4(), this, type);
+ 		else if ( type == "md5" )
+@@ -6810,14 +6837,18 @@
+ 		else if ( type == "sha512" )
+ 			return new opensslHashContext( EVP_sha512(), this, type);
+ #endif
++/*
+ #ifdef OBJ_whirlpool
+ 		else if ( type == "whirlpool" )
+ 			return new opensslHashContext( EVP_whirlpool(), this, type);
+ #endif
++*/
+ 		else if ( type == "pbkdf1(sha1)" )
+ 			return new opensslPbkdf1Context( EVP_sha1(), this, type );
++#ifdef HAVE_OPENSSL_MD2
+ 		else if ( type == "pbkdf1(md2)" )
+ 			return new opensslPbkdf1Context( EVP_md2(), this, type );
++#endif
+ 		else if ( type == "pbkdf2(sha1)" )
+ 			return new opensslPbkdf2Context( this, type );
+ 		else if ( type == "hmac(md5)" )
diff --git a/source/l/qca-ossl/qca-ossl.SlackBuild b/source/l/qca-ossl/qca-ossl.SlackBuild
index 33bba969..c1fbcc95 100755
--- a/source/l/qca-ossl/qca-ossl.SlackBuild
+++ b/source/l/qca-ossl/qca-ossl.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -26,7 +26,7 @@
 
 PKGNAM=qca-ossl
 VERSION=2.0.0_beta3
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -64,7 +64,7 @@ tar xvf $CWD/$PKGNAM-$(echo $VERSION | tr _ -).tar.bz2 || exit 1
 cd $PKGNAM-$(echo $VERSION | tr _ -) || exit 1
 chown -R root:root .
 # Fix a compilation error with our new openssh:
-zcat $CWD/qca-ossl.nowhirlpool.diff.gz | patch -p0 --verbose || exit 1
+zcat $CWD/qca-ossl-openssl-1.0.0.patch.gz | patch -p1 --verbose || exit 1
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
diff --git a/source/l/qca-ossl/qca-ossl.nowhirlpool.diff b/source/l/qca-ossl/qca-ossl.nowhirlpool.diff
deleted file mode 100644
index 96451e1a..00000000
--- a/source/l/qca-ossl/qca-ossl.nowhirlpool.diff
+++ /dev/null
@@ -1,30 +0,0 @@
-# remove whirlpool usage.  the algorithm is missing on at least 0.9.8g and 
-# 0.9.8i, even though there's an OBJ_whirlpool definition in 0.9.8i.
---- qca-ossl.cpp	2008/08/18 09:08:51	848615
-+++ qca-ossl.cpp	2008/09/24 19:22:26	864423
-@@ -6616,9 +6616,11 @@
- #ifdef SHA512_DIGEST_LENGTH
- 	list += "sha512";
- #endif
-+/*
- #ifdef OBJ_whirlpool
- 	list += "whirlpool";
- #endif
-+*/
- 	return list;
- }
- 
-@@ -6863,10 +6865,12 @@
- 		else if ( type == "sha512" )
- 			return new opensslHashContext( EVP_sha512(), this, type);
- #endif
-+/*
- #ifdef OBJ_whirlpool
- 		else if ( type == "whirlpool" )
- 			return new opensslHashContext( EVP_whirlpool(), this, type);
- #endif
-+*/
- 		else if ( type == "pbkdf1(sha1)" )
- 			return new opensslPbkdf1Context( EVP_sha1(), this, type );
- 		else if ( type == "pbkdf1(md2)" )
-
diff --git a/source/l/qt/QElfParser-fix-type-of-sh_size.patch b/source/l/qt/QElfParser-fix-type-of-sh_size.patch
new file mode 100644
index 00000000..1c30f9a4
--- /dev/null
+++ b/source/l/qt/QElfParser-fix-type-of-sh_size.patch
@@ -0,0 +1,41 @@
+From 9e981c4dd03effc2c52b52f529edfa8955e534ce Mon Sep 17 00:00:00 2001
+From: Pino Toscano <toscano.pino@tiscali.it>
+Date: Tue, 15 May 2012 14:40:15 +0200
+Subject: [PATCH] QElfParser: fix type of sh_size
+
+The type of the sh_size field of a section header is either Elf32_Word or Elf64_Xword,
+so the type used cannot be qelfword_t (always 32 bits) but qelfoff_t.
+
+Change-Id: Ia380b6823913fee7a96b39f742630ae3a9ca0cb8
+Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+Reviewed-by: Arvid Picciani <arvid.picciani@nokia.com>
+(backport of 77b179689ba37dc909778fdd00df2701f83a2868 from qtbase)
+---
+ src/corelib/plugin/qelfparser_p.cpp |    4 ++--
+ src/corelib/plugin/qelfparser_p.h   |    2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/src/corelib/plugin/qelfparser_p.cpp
++++ b/src/corelib/plugin/qelfparser_p.cpp
+@@ -61,8 +61,8 @@ const char *QElfParser::parseSectionHead
+          + sizeof(qelfaddr_t);  // sh_addr
+     sh->offset = read<qelfoff_t>(data);
+     data += sizeof(qelfoff_t);  // sh_offset
+-    sh->size = read<qelfword_t>(data);
+-    data += sizeof(qelfword_t); // sh_size
++    sh->size = read<qelfoff_t>(data);
++    data += sizeof(qelfoff_t);  // sh_size
+     return data;
+ }
+ 
+--- a/src/corelib/plugin/qelfparser_p.h
++++ b/src/corelib/plugin/qelfparser_p.h
+@@ -80,7 +80,7 @@ public:
+         qelfword_t name;
+         qelfword_t type;
+         qelfoff_t  offset;
+-        qelfword_t size;
++        qelfoff_t  size;
+     };
+ 
+     int m_endian;
diff --git a/source/l/qt/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch b/source/l/qt/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch
new file mode 100644
index 00000000..9acae10c
--- /dev/null
+++ b/source/l/qt/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch
@@ -0,0 +1,37 @@
+Description:
+ QPainter together with QPrinter leaves a lot of temporary files in
+ /tmp with every printout. That is a problem for embedded devices,
+ which have not such a large /tmp-partition. We are using 80 MByte as
+ tmpfs, i.e. in RAM. After some printounts cups deactivates the printer
+ because there is no space to copy the temporary files to /tmp.
+
+ What happened: In QPdfBaseEnginePrivate::openPrintDevice() noone
+ remembers the file descriptor opened by tempFile() which is a call to
+ the cups library to cupsTempFile()
+
+ Later in closePrintDevice the check for fd<0 fails, so no one closes
+ the file descriptor. If you later remove the file, the descriptor is
+ still open and cannot removed until you close the application.
+
+ If you print 20 times and more during your application is running and
+ you print out large files (complicate forms with a lot of elements
+ produces files with 3-4 MByte) your temporary file can be full, but
+ you don't see (with ls) files in it.
+
+Bug: https://bugreports.qt.nokia.com/browse/QTBUG-14724
+Author: Georg Scherzer
+
+---
+ src/gui/painting/qpdf.cpp |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/src/gui/painting/qpdf.cpp
++++ b/src/gui/painting/qpdf.cpp
+@@ -1686,6 +1686,7 @@ bool QPdfBaseEnginePrivate::openPrintDev
+         cupsTempFile = ret.second;
+         outDevice = new QFile();
+         static_cast<QFile *>(outDevice)->open(ret.first, QIODevice::WriteOnly);
++        fd = ret.first;
+ #endif
+ #ifndef QT_NO_LPR
+     } else {
diff --git a/source/l/qt/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch b/source/l/qt/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch
new file mode 100644
index 00000000..4d9834a8
--- /dev/null
+++ b/source/l/qt/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch
@@ -0,0 +1,97 @@
+From a91e9dd202640598d8dec091c67ec94536390e7f Mon Sep 17 00:00:00 2001
+From: "Owen W. Taylor" <otaylor@fishsoup.net>
+Date: Mon, 17 Oct 2011 17:27:43 -0400
+Subject: [PATCH] Fix logic for figuring out what ConfigureNotify positions can be trusted
+
+When reading ahead in the queue for ConfigureNotify events, it's necessary
+to look for intermediate ReparentNotify events as well, since they will
+determine whether the position in the event can be trusted or not.
+
+Bug: https://bugreports.qt.nokia.com/browse/QTBUG-21900
+---
+ src/gui/kernel/qapplication_x11.cpp |   47 +++++++++++++++++++++++++++++++-----
+ 1 file changed, 41 insertions(+), 6 deletions(-)
+
+--- a/src/gui/kernel/qapplication_x11.cpp
++++ b/src/gui/kernel/qapplication_x11.cpp
+@@ -816,6 +816,27 @@ static Bool qt_sync_request_scanner(Disp
+ #endif
+ #endif // QT_NO_XSYNC
+ 
++struct qt_configure_event_data
++{
++    WId window;
++    WId parent;
++};
++
++static Bool qt_configure_event_scanner(Display*, XEvent *event, XPointer arg)
++{
++    qt_configure_event_data *data =
++        reinterpret_cast<qt_configure_event_data*>(arg);
++    if (event->type == ConfigureNotify &&
++        event->xconfigure.window == data->window) {
++        return true;
++    } else if (event->type == ReparentNotify &&
++               event->xreparent.window == data->window) {
++        data->parent = event->xreparent.parent;
++    }
++
++    return false;
++}
++
+ static void qt_x11_create_intern_atoms()
+ {
+     const char *names[QX11Data::NAtoms];
+@@ -5281,8 +5302,11 @@ bool QETWidget::translateConfigEvent(con
+         if (d->extra->compress_events) {
+             // ConfigureNotify compression for faster opaque resizing
+             XEvent otherEvent;
+-            while (XCheckTypedWindowEvent(X11->display, internalWinId(), ConfigureNotify,
+-                                          &otherEvent)) {
++            qt_configure_event_data configureData;
++            configureData.window = internalWinId();
++            configureData.parent = d->topData()->parentWinId;
++            while (XCheckIfEvent(X11->display, &otherEvent,
++                                 &qt_configure_event_scanner, (XPointer)&configureData)) {
+                 if (qt_x11EventFilter(&otherEvent))
+                     continue;
+ 
+@@ -5295,13 +5319,19 @@ bool QETWidget::translateConfigEvent(con
+                 newSize.setWidth(otherEvent.xconfigure.width);
+                 newSize.setHeight(otherEvent.xconfigure.height);
+ 
++                trust = isVisible()
++                        && (configureData.parent == XNone ||
++                            configureData.parent == QX11Info::appRootWindow());
++
+                 if (otherEvent.xconfigure.send_event || trust) {
+                     newCPos.rx() = otherEvent.xconfigure.x +
+                                    otherEvent.xconfigure.border_width;
+                     newCPos.ry() = otherEvent.xconfigure.y +
+                                    otherEvent.xconfigure.border_width;
+                     isCPos = true;
+-                }
++                } else {
++                    isCPos = false;
++               }
+             }
+ #ifndef QT_NO_XSYNC
+             qt_sync_request_event_data sync_event;
+@@ -5314,9 +5344,14 @@ bool QETWidget::translateConfigEvent(con
+         }
+ 
+         if (!isCPos) {
+-            // we didn't get an updated position of the toplevel.
+-            // either we haven't moved or there is a bug in the window manager.
+-            // anyway, let's query the position to be certain.
++            // If the last configure event didn't have a trustable position,
++            // it's necessary to query, see ICCCM 4.24:
++            //
++            // Any real ConfigureNotify event on a top-level window implies
++            // that the window position on the root may have changed, even
++            // though the event reports that the window position in its
++            // parent is unchanged because the window may have been reparented.
++
+             int x, y;
+             Window child;
+             XTranslateCoordinates(X11->display, internalWinId(),
diff --git a/source/l/qt/Qt.pc b/source/l/qt/Qt.pc
new file mode 100644
index 00000000..f4c0d593
--- /dev/null
+++ b/source/l/qt/Qt.pc
@@ -0,0 +1,16 @@
+prefix=/usr/lib${LIBDIRSUFFIX}/qt
+bindir=${prefix}/bin
+datadir=${prefix}
+docdir=${prefix}/doc
+headerdir=${prefix}/include
+importdir=${prefix}/imports
+libdir=${prefix}/lib
+moc=${bindir}/moc
+plugindir=${prefix}/plugins
+qmake=${bindir}/qmake
+sysconfdir=/etc
+translationdir=${prefix}/translations
+
+Name: Qt
+Description: Qt Configuration
+Version: 4.8.1
diff --git a/source/l/qt/doinst.sh b/source/l/qt/doinst.sh
index 6f7c5df0..b9a2c53b 100644
--- a/source/l/qt/doinst.sh
+++ b/source/l/qt/doinst.sh
@@ -3,3 +3,8 @@ if [ -x sbin/ldconfig ]; then
   chroot . /sbin/ldconfig 2> /dev/null
 fi
 
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1
+fi
+
+
diff --git a/source/l/qt/qt.QSortFilterProxyModel.reformatted.diff b/source/l/qt/qt.QSortFilterProxyModel.reformatted.diff
deleted file mode 100644
index 0ab94b31..00000000
--- a/source/l/qt/qt.QSortFilterProxyModel.reformatted.diff
+++ /dev/null
@@ -1,92 +0,0 @@
---- ./src/gui/itemviews/qsortfilterproxymodel.cpp.orig	2010-11-20 17:54:23.000000000 -0600
-+++ ./src/gui/itemviews/qsortfilterproxymodel.cpp	2011-01-07 00:40:04.000000000 -0600
-@@ -782,14 +782,14 @@
-         if (orthogonal_source_to_proxy.isEmpty()) {
-             const int ortho_end = (orient == Qt::Horizontal) ? model->rowCount(source_parent) : model->columnCount(source_parent);
- 
-+            orthogonal_source_to_proxy.resize(ortho_end);
-+
-             for (int ortho_item = 0; ortho_item < ortho_end; ++ortho_item) {
-                 if ((orient == Qt::Horizontal) ? q->filterAcceptsRow(ortho_item, source_parent)
-                         : q->filterAcceptsColumn(ortho_item, source_parent)) {
-                     orthogonal_proxy_to_source.append(ortho_item);
-                 }
-             }
--            orthogonal_source_to_proxy.resize(orthogonal_proxy_to_source.size());
--
-             if (orient == Qt::Horizontal) {
-                 // We're reacting to columnsInserted, but we've just inserted new rows. Sort them.
-                 sort_source_rows(orthogonal_proxy_to_source, source_parent);
---- ./tests/auto/qsortfilterproxymodel/qsortfilterproxymodel.pro.orig	2010-11-20 17:54:28.000000000 -0600
-+++ ./tests/auto/qsortfilterproxymodel/qsortfilterproxymodel.pro	2011-01-07 00:40:04.000000000 -0600
-@@ -1,6 +1,7 @@
- load(qttest_p4)
- 
--SOURCES += tst_qsortfilterproxymodel.cpp
--
-+INCLUDEPATH += $$PWD/../modeltest
- 
-+SOURCES         += tst_qsortfilterproxymodel.cpp ../modeltest/dynamictreemodel.cpp ../modeltest/modeltest.cpp
-+HEADERS         += ../modeltest/dynamictreemodel.h ../modeltest/modeltest.h
- 
---- ./tests/auto/qsortfilterproxymodel/tst_qsortfilterproxymodel.cpp.orig	2010-11-20 17:54:28.000000000 -0600
-+++ ./tests/auto/qsortfilterproxymodel/tst_qsortfilterproxymodel.cpp	2011-01-07 00:41:02.000000000 -0600
-@@ -43,6 +43,9 @@
- #include <QtTest/QtTest>
- #include "../../shared/util.h"
- 
-+#include "dynamictreemodel.h"
-+#include "modeltest.h"
-+
- #include <QtCore>
- #include <QtGui>
- 
-@@ -143,6 +146,7 @@
-     void taskQTBUG_10287_unnecessaryMapCreation();
- 
-     void testMultipleProxiesWithSelection();
-+    void filteredColumns();
- 
- protected:
-     void buildHierarchy(const QStringList &data, QAbstractItemModel *model);
-@@ -3135,5 +3139,40 @@
-     // No assert failure, it passes.
- }
- 
-+class FilteredColumnProxyModel : public QSortFilterProxyModel
-+{
-+  Q_OBJECT
-+public:
-+  FilteredColumnProxyModel(QObject *parent = 0)
-+    : QSortFilterProxyModel(parent)
-+  {
-+
-+  }
-+
-+protected:
-+  bool filterAcceptsColumn(int column, const QModelIndex &source_parent) const
-+  {
-+    return column % 2 != 0;
-+  }
-+};
-+
-+void tst_QSortFilterProxyModel::filteredColumns()
-+{
-+    DynamicTreeModel *model = new DynamicTreeModel(this);
-+
-+    FilteredColumnProxyModel *proxy = new FilteredColumnProxyModel(this);
-+    proxy->setSourceModel(model);
-+
-+    new ModelTest(proxy, this);
-+
-+    ModelInsertCommand *insertCommand = new ModelInsertCommand(model, this);
-+    insertCommand->setNumCols(2);
-+    insertCommand->setStartRow(0);
-+    insertCommand->setEndRow(0);
-+    // Parent is QModelIndex()
-+    insertCommand->doCommand();
-+
-+}
-+
- QTEST_MAIN(tst_QSortFilterProxyModel)
- #include "tst_qsortfilterproxymodel.moc"
diff --git a/source/l/qt/qt.SlackBuild b/source/l/qt/qt.SlackBuild
index f79d2c2a..b361aaee 100755
--- a/source/l/qt/qt.SlackBuild
+++ b/source/l/qt/qt.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -35,23 +35,28 @@
 #
 # Alternate method (we don't use this):
 # wget http://qt.gitorious.org/qt/kde-qt/archive-tarball/4.6.2-patched
+#
+# Modifications 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
+# qt 4.7.3, 4.7.4, 4.8.0, 4.8.1, 4.8.2 are built from original nokia sources.
 
 PKGNAM=qt
-VERSION=$(ls qt-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)
-BUILD=${BUILD:-3}
+VERSION=$(ls qt-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+BUILD=${BUILD:-4}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j7}
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -61,11 +66,22 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  # To prevent "qatomic_armv6.h error: output number 2 not directly addressable"
+  # More permanent solution is to patch gcc:
+  # http://bazaar.launchpad.net/~linaro-toolchain-dev/gcc-linaro/4.6/revision/106731
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16 -fno-strict-volatile-bitfields"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
@@ -73,23 +89,9 @@ PKG=$TMP/package-${PKGNAM}
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-#rm -rf qt-x11-opensource-src-$VERSION
-#tar xvf $CWD/qt-x11-opensource-src-$VERSION.tar.gz     # For qt releases
-#cd qt-x11-opensource-src-$VERSION || exit 1
-
-rm -rf qt-$VERSION
-if [ -r $CWD/qt-$VERSION.tar.gz ]; then
-  tar xvf $CWD/qt-$VERSION.tar.gz || exit 1
-elif [ -r $CWD/qt-$VERSION.tar.bz2 ]; then
-  tar xvf $CWD/qt-$VERSION.tar.bz2 || exit 1
-elif [ -r $CWD/qt-$VERSION.tar.xz ]; then
-  tar xvf $CWD/qt-$VERSION.tar.xz || exit 1
-elif [ -r $CWD/qt-$VERSION.tar.lzma ]; then
-  tar xvf $CWD/qt-$VERSION.tar.lzma || exit 1
-else
-  exit 1
-fi
-cd qt-$VERSION || exit 1
+rm -rf qt-everywhere-opensource-src-$VERSION
+tar xvf $CWD/qt-everywhere-opensource-src-$VERSION.tar.xz     # For qt releases
+cd qt-everywhere-opensource-src-$VERSION || exit 1
 
 chown -R root:root .
 find . \
@@ -98,28 +100,32 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# apply_patches looks for a ".svn" directory, which doesn't exist in the used snapshot.
-# removing the check from apply_patches to not try to apply already applied patches
-sed -i "s| test -d .svn &&||" apply_patches
-
-# This is only needed/wanted for qt-copy (the r###### version) that we're
-# building right now. It might require manual intervention, so don't walk
-# away during the build
-./apply_patches
-
 if [ $ARCH = "i486" ]; then
-  zcat $CWD/qt.x86.cflags.diff.gz | patch -p1 || exit 1
+  sed -i -e "s/QMAKE_CFLAGS_RELEASE        += -O2/QMAKE_CFLAGS_RELEASE        += $SLKCFLAGS/" mkspecs/common/gcc-base.conf || exit 1
 fi
 
 # Fix path to mysql header
 zcat $CWD/qt.mysql.h.diff.gz | patch -p1 --verbose || exit 1
 
-# Upstream patch required for upcoming kdepim-4.6.x:
-zcat $CWD/qt.QSortFilterProxyModel.reformatted.diff.gz | patch -p1 --verbose || exit 1
+# gcc doesn't support flag "-fuse-ld=gold":
+zcat $CWD/qt.ld-gold.patch.gz | patch -p1 --verbose || exit 1
+
+# Stupid idea - remove it:
+zcat $CWD/qt.webkit-no_Werror.patch.gz | patch -p1 --verbose || exit 1
+
+# Fix cursor position bug within tables:
+zcat $CWD/qt.ca89c49.cursor.position.diff.gz | patch -p1 --verbose || exit 1
+
+# Fix assistant crash:
+zcat $CWD/qt.assistant.memcpy-crash.diff.gz | patch -p0 --verbose || exit 1
+
+# Fix webkit compiling with recent glib:
+zcat $CWD/qt.webkit.glib.diff.gz | patch -p1 --verbose || exit 1
 
-# Blacklist compromised certificates:
-zcat $CWD/qt.blacklist.bad.certs.diff.gz | patch -p1 --verbose || exit 1
-zcat $CWD/qt.blacklist.bad.certs.patch02.diff.gz | patch -p1 --verbose || exit 1
+# Some patches from upstream:
+zcat $CWD/QElfParser-fix-type-of-sh_size.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/QTBUG-14724_close_orphaned_file_descriptors_after_printing.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/QTBUG-21900_Buttons_in_Qt_applications_not_clickable_when_run_under_gnome-shell.patch.gz | patch -p1 --verbose || exit 1
 
 export CFLAGS="$SLKCFLAGS"
 export CXXFLAGS="$SLKCFLAGS"
@@ -128,7 +134,6 @@ export OPENSOURCE_CXXFLAGS="$SLKCFLAGS"
   -confirm-license \
   -opensource \
   -prefix /usr/lib${LIBDIRSUFFIX}/qt \
-  -qt-gif \
   -fast \
   -system-libpng \
   -system-libjpeg \
@@ -152,10 +157,34 @@ make install INSTALL_ROOT=$PKG || exit 1
 # The infamous qt -> qt-${VERSION} link that keeps the full path out of .la files:
 ( cd $PKG/usr/lib${LIBDIRSUFFIX} ; ln -sf qt qt-${VERSION} )
 
-# libjscore is used internally.  Prevent a false dependency on this in the .la files:
+# Add a missing Qt.pc which is needed by KDE applications:
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig
+cat <<EOF > $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig/Qt.pc
+prefix=/usr/lib${LIBDIRSUFFIX}/qt
+bindir=\${prefix}/bin
+datadir=\${prefix}
+docdir=\${prefix}/doc
+headerdir=\${prefix}/include
+importdir=\${prefix}/imports
+libdir=\${prefix}/lib
+moc=\${bindir}/moc
+plugindir=\${prefix}/plugins
+qmake=\${bindir}/qmake
+sysconfdir=\${prefix}/etc/settings
+translationdir=\${prefix}/translations
+
+Name: Qt
+Description: Qt Configuration
+Version: $VERSION
+EOF
+
+# libjscore is used internally.  Prevent a false dependency on this in the .la and .pc files:
 sed -i "s,-ljscore,,g" $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/*.la $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig/*.pc
 sed -i "s,-L../JavaScriptCore/release,,g" $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/*.la $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig/*.pc
 
+# libwebcore is used internally.  Prevent a false dependency on this in the .la and .pc files:
+sed -i "s#-L/usr/lib${LIBDIRSUFFIX}/qt/lib -L../../WebCore/release -L../../JavaScriptCore/release -L/usr/X11R6/lib$LIBDIRSUFFIX  -lwebcore##g" $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/libQtWebKit.la $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig/QtWebKit.pc
+
 # Link the shared libraries into /usr/lib:
 ( cd $PKG/usr/lib${LIBDIRSUFFIX}
   for file in qt/lib/*.so* ; do
@@ -163,11 +192,6 @@ sed -i "s,-L../JavaScriptCore/release,,g" $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/*.l
   done
 )
 
-if [ $ARCH = "i486" ]; then
-  # Put this back as shipped:
-   zcat $CWD/qt.x86.cflags.diff.gz | patch -p1 -R
-fi
-
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
@@ -195,6 +219,71 @@ mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
   done
 )
 
+# Add menu entries for all those hidden but great Qt applications:
+# Qt logo:
+convert $PKG/usr/lib$LIBDIRSUFFIX/qt/doc/src/images/qt-logo.png  -resize 48x48 $PKG/usr/share/icons/hicolor/48x48/apps/qt-logo.png
+convert $PKG/usr/lib$LIBDIRSUFFIX/qt/doc/src/images/qt-logo.png  -resize 48x48 $PKG/usr/share/icons/hicolor/48x48/apps/qt-logo.png
+# Assistant icons
+install -p -m644 -D tools/assistant/tools/assistant/images/assistant.png $PKG/usr/share/icons/hicolor/32x32/apps/assistant.png
+install -p -m644 -D tools/assistant/tools/assistant/images/assistant-128.png $PKG/usr/share/icons/hicolor/128x128/apps/assistant.png
+# Designer icon
+install -p -m644 -D tools/designer/src/designer/images/designer.png $PKG/usr/share/icons/hicolor/128x128/apps/designer.png
+# Linguist icons
+for icon in tools/linguist/linguist/images/icons/linguist-*-32.png ; do
+  size=$(echo $(basename ${icon}) | cut -d- -f2)
+  install -p -m644 -D ${icon} $PKG/usr/share/icons/hicolor/${size}x${size}/apps/linguist.png
+done
+
+# And the .desktop files
+mkdir -p $PKG/usr/share/applications
+cat <<EOF > $PKG/usr/share/applications/designer.desktop
+[Desktop Entry]
+Name=Qt4 Designer
+GenericName=Interface Designer
+Comment=Design GUIs for Qt4 applications
+Exec=designer
+Icon=designer
+MimeType=application/x-designer;
+Terminal=false
+Encoding=UTF-8
+Type=Application
+Categories=Qt;Development;
+EOF
+cat <<EOF > $PKG/usr/share/applications/assistant.desktop
+[Desktop Entry]
+Name=Qt4 Assistant 
+Comment=Shows Qt4 documentation and examples
+Exec=assistant
+Icon=assistant
+Terminal=false
+Encoding=UTF-8
+Type=Application
+Categories=Qt;Development;Documentation;
+EOF
+cat <<EOF > $PKG/usr/share/applications/linguist.desktop
+[Desktop Entry]
+Name=Qt4 Linguist 
+Comment=Add translations to Qt4 applications
+Exec=linguist
+Icon=linguist
+MimeType=text/vnd.trolltech.linguist;application/x-linguist;
+Terminal=false
+Encoding=UTF-8
+Type=Application
+Categories=Qt;Development;
+EOF
+cat <<EOF > $PKG/usr/share/applications/qtconfig.desktop
+[Desktop Entry]
+Name=Qt4 Config 
+Comment=Configure Qt4 behavior, styles, fonts
+Exec=qtconfig
+Icon=qt-logo
+Terminal=false
+Encoding=UTF-8
+Type=Application
+Categories=Qt;Settings;
+EOF
+
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a *GPL_EXCEPTION* FAQ* INSTALL KNOWN* LICENSE* README* changes-* \
diff --git a/source/l/qt/qt.assistant.memcpy-crash.diff b/source/l/qt/qt.assistant.memcpy-crash.diff
new file mode 100644
index 00000000..f2193ee8
--- /dev/null
+++ b/source/l/qt/qt.assistant.memcpy-crash.diff
@@ -0,0 +1,11 @@
+--- tools/assistant/tools/assistant/mainwindow.cpp	2012-06-27 03:02:37.539564947 +0200
++++ tools/assistant/tools/assistant/mainwindow.cpp	2012-06-27 03:03:18.843561620 +0200
+@@ -944,8 +944,7 @@ void MainWindow::updateApplicationFont()
+     if (helpEngine.usesAppFont())
+         font = helpEngine.appFont();
+ 
+-    const QWidgetList &widgets = qApp->allWidgets();
+-    foreach (QWidget* widget, widgets)
++    foreach (QWidget* widget, QApplication::allWidgets())
+         widget->setFont(font);
+ }
diff --git a/source/l/qt/qt.blacklist.bad.certs.diff b/source/l/qt/qt.blacklist.bad.certs.diff
deleted file mode 100644
index 38b6d369..00000000
--- a/source/l/qt/qt.blacklist.bad.certs.diff
+++ /dev/null
@@ -1,67 +0,0 @@
---- ./src/network/ssl/qsslcertificate_p.h.orig	2010-11-20 17:54:24.000000000 -0600
-+++ ./src/network/ssl/qsslcertificate_p.h	2011-03-24 18:08:59.000000000 -0500
-@@ -96,6 +96,7 @@
-     static QSslCertificate QSslCertificate_from_X509(X509 *x509);
-     static QList<QSslCertificate> certificatesFromPem(const QByteArray &pem, int count = -1);
-     static QList<QSslCertificate> certificatesFromDer(const QByteArray &der, int count = -1);
-+    static bool isBlacklisted(const QSslCertificate &certificate);
- 
-     friend class QSslSocketBackendPrivate;
- 
---- ./src/network/ssl/qsslcertificate.cpp.orig	2010-11-20 17:54:24.000000000 -0600
-+++ ./src/network/ssl/qsslcertificate.cpp	2011-03-24 18:08:59.000000000 -0500
-@@ -219,17 +219,19 @@
-     Returns true if this certificate is valid; otherwise returns
-     false.
- 
--    Note: Currently, this function only checks that the current
-+    Note: Currently, this function checks that the current
-     data-time is within the date-time range during which the
--    certificate is considered valid. No other checks are
--    currently performed.
-+    certificate is considered valid, and checks that the
-+    certificate is not in a blacklist of fraudulent certificates.
- 
-     \sa isNull()
- */
- bool QSslCertificate::isValid() const
- {
-     const QDateTime currentTime = QDateTime::currentDateTime();
--    return currentTime >= d->notValidBefore && currentTime <= d->notValidAfter;
-+    return currentTime >= d->notValidBefore &&
-+            currentTime <= d->notValidAfter &&
-+            ! QSslCertificatePrivate::isBlacklisted(*this);
- }
- 
- /*!
-@@ -798,6 +800,30 @@
-     return certificates;
- }
- 
-+// These certificates are known to be fraudulent and were created during the comodo
-+// compromise. See http://www.comodo.com/Comodo-Fraud-Incident-2011-03-23.html
-+static const char *certificate_blacklist[] = {
-+    "04:7e:cb:e9:fc:a5:5f:7b:d0:9e:ae:36:e1:0c:ae:1e",
-+    "f5:c8:6a:f3:61:62:f1:3a:64:f5:4f:6d:c9:58:7c:06",
-+    "d7:55:8f:da:f5:f1:10:5b:b2:13:28:2b:70:77:29:a3",
-+    "39:2a:43:4f:0e:07:df:1f:8a:a3:05:de:34:e0:c2:29",
-+    "3e:75:ce:d4:6b:69:30:21:21:88:30:ae:86:a8:2a:71",
-+    "e9:02:8b:95:78:e4:15:dc:1a:71:0a:2b:88:15:44:47",
-+    "92:39:d5:34:8f:40:d1:69:5a:74:54:70:e1:f2:3f:43",
-+    "b0:b7:13:3e:d0:96:f9:b5:6f:ae:91:c8:74:bd:3a:c0",
-+    "d8:f3:5f:4e:b7:87:2b:2d:ab:06:92:e3:15:38:2f:b0",
-+    0
-+};
-+
-+bool QSslCertificatePrivate::isBlacklisted(const QSslCertificate &certificate)
-+{
-+    for (int a = 0; certificate_blacklist[a] != 0; a++) {
-+        if (certificate.serialNumber() == certificate_blacklist[a])
-+            return true;
-+    }
-+    return false;
-+}
-+
- #ifndef QT_NO_DEBUG_STREAM
- QDebug operator<<(QDebug debug, const QSslCertificate &certificate)
- {
diff --git a/source/l/qt/qt.blacklist.bad.certs.patch02.diff b/source/l/qt/qt.blacklist.bad.certs.patch02.diff
deleted file mode 100644
index b8bb1e4e..00000000
--- a/source/l/qt/qt.blacklist.bad.certs.patch02.diff
+++ /dev/null
@@ -1,35 +0,0 @@
-From b87528a71b66e786c11804d7b79e408aae612748 Mon Sep 17 00:00:00 2001
-From: Peter Hartmann <peter.hartmann@nokia.com>
-Date: Fri, 25 Mar 2011 13:45:24 +0100
-Subject: [PATCH] QSslSocket internals: abort on encountering blacklisted certificates
-
-tested manually with "openssl s_server -cert blacklisted.pem -key
-key.pem" and connecting a QSslSocket.
-
-Reviewed-by: Markus Goetz
-Task-number: QTBUG-18338
----
- src/network/ssl/qsslsocket_openssl.cpp |    7 +++++++
- 1 files changed, 7 insertions(+), 0 deletions(-)
-
-diff --git a/src/network/ssl/qsslsocket_openssl.cpp b/src/network/ssl/qsslsocket_openssl.cpp
-index 0866534..2427193 100644
---- a/src/network/ssl/qsslsocket_openssl.cpp
-+++ b/src/network/ssl/qsslsocket_openssl.cpp
-@@ -1193,6 +1193,13 @@ bool QSslSocketBackendPrivate::startHandshake()
-     X509 *x509 = q_SSL_get_peer_certificate(ssl);
-     configuration.peerCertificate = QSslCertificatePrivate::QSslCertificate_from_X509(x509);
-     q_X509_free(x509);
-+    if (QSslCertificatePrivate::isBlacklisted(configuration.peerCertificate)) {
-+        q->setErrorString(QSslSocket::tr("The peer certificate is blacklisted"));
-+        q->setSocketError(QAbstractSocket::SslHandshakeFailedError);
-+        emit q->error(QAbstractSocket::SslHandshakeFailedError);
-+        plainSocket->disconnectFromHost();
-+        return false;
-+    }
- 
-     // Start translating errors.
-     QList<QSslError> errors;
--- 
-1.6.1
-
diff --git a/source/l/qt/qt.ca89c49.cursor.position.diff b/source/l/qt/qt.ca89c49.cursor.position.diff
new file mode 100644
index 00000000..ab3429f8
--- /dev/null
+++ b/source/l/qt/qt.ca89c49.cursor.position.diff
@@ -0,0 +1,31 @@
+From ca89c49fa2c5cbb3945897046f33eed9f7da846c Mon Sep 17 00:00:00 2001
+From: Jiang Jiang <jiang.jiang@nokia.com>
+Date: Tue, 3 Jul 2012 10:17:49 +0200
+Subject: [PATCH] Fix cursor truncate to include line position
+
+Since we could have moved the line position (QTextLine::setPosition),
+the truncating position should be adjusted with that.
+
+Change-Id: Ie1acd4a1b6a4adfbeeb9ce8ee2dfa19d992470e8
+Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
+---
+ src/gui/text/qtextlayout.cpp |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/gui/text/qtextlayout.cpp b/src/gui/text/qtextlayout.cpp
+index 16f7150..52f2793 100644
+--- a/src/gui/text/qtextlayout.cpp
++++ b/src/gui/text/qtextlayout.cpp
+@@ -2616,8 +2616,8 @@ qreal QTextLine::cursorToX(int *cursorPos, Edge edge) const
+         x += eng->offsetInLigature(si, pos, end, glyph_pos);
+     }
+ 
+-    if (eng->option.wrapMode() != QTextOption::NoWrap && x > line.width)
+-        x = line.width;
++    if (eng->option.wrapMode() != QTextOption::NoWrap && x > line.x + line.width)
++        x = line.x + line.width;
+ 
+     *cursorPos = pos + si->position;
+     return x.toReal();
+-- 
+1.7.10
diff --git a/source/l/qt/qt.ld-gold.patch b/source/l/qt/qt.ld-gold.patch
new file mode 100644
index 00000000..0e3897e9
--- /dev/null
+++ b/source/l/qt/qt.ld-gold.patch
@@ -0,0 +1,22 @@
+diff -up qt-everywhere-opensource-src-4.8.0/src/3rdparty/webkit/Source/common.pri.me qt-everywhere-opensource-src-4.8.0/src/3rdparty/webkit/Source/common.pri
+--- qt-everywhere-opensource-src-4.8.0/src/3rdparty/webkit/Source/common.pri.me	2012-01-24 13:05:50.460890750 +0100
++++ qt-everywhere-opensource-src-4.8.0/src/3rdparty/webkit/Source/common.pri	2012-01-24 13:19:08.836799974 +0100
+@@ -3,12 +3,12 @@
+ contains(JAVASCRIPTCORE_JIT,yes): DEFINES+=ENABLE_JIT=1
+ contains(JAVASCRIPTCORE_JIT,no): DEFINES+=ENABLE_JIT=0
+ 
+-linux-g++ {
+-isEmpty($$(SBOX_DPKG_INST_ARCH)):exists(/usr/bin/ld.gold) {
+-    message(Using gold linker)
+-    QMAKE_LFLAGS+=-fuse-ld=gold
+-}
+-}
++#linux-g++ {
++#isEmpty($$(SBOX_DPKG_INST_ARCH)):exists(/usr/bin/ld.gold) {
++#    message(Using gold linker)
++#    QMAKE_LFLAGS+=-fuse-ld=gold
++#}
++#}
+ 
+ # We use this flag on production branches
+ # See https://bugs.webkit.org/show_bug.cgi?id=60824
diff --git a/source/l/qt/qt.webkit-no_Werror.patch b/source/l/qt/qt.webkit-no_Werror.patch
new file mode 100644
index 00000000..b8e718e0
--- /dev/null
+++ b/source/l/qt/qt.webkit-no_Werror.patch
@@ -0,0 +1,13 @@
+diff -up qt-everywhere-opensource-src-4.8.1/src/3rdparty/webkit/Source/WebKit.pri.no_Werror qt-everywhere-opensource-src-4.8.1/src/3rdparty/webkit/Source/WebKit.pri
+--- qt-everywhere-opensource-src-4.8.1/src/3rdparty/webkit/Source/WebKit.pri.no_Werror	2012-03-14 15:01:29.000000000 +0100
++++ qt-everywhere-opensource-src-4.8.1/src/3rdparty/webkit/Source/WebKit.pri	2012-03-28 17:12:33.391294004 +0200
+@@ -102,8 +102,6 @@ CONFIG -= warn_on
+ 
+ # Treat warnings as errors on x86/Linux/GCC
+ linux-g++* {
+-    !CONFIG(standalone_package):isEqual(QT_ARCH,x86_64)|isEqual(QT_ARCH,i386): QMAKE_CXXFLAGS += -Werror
+-
+     greaterThan(QT_GCC_MAJOR_VERSION, 3):greaterThan(QT_GCC_MINOR_VERSION, 5) {
+         if (!contains(QMAKE_CXXFLAGS, -std=c++0x) && !contains(QMAKE_CXXFLAGS, -std=gnu++0x)) {
+             # We need to deactivate those warnings because some names conflicts with upcoming c++0x types (e.g.nullptr).
+
diff --git a/source/l/qt/qt.webkit.glib.diff b/source/l/qt/qt.webkit.glib.diff
new file mode 100644
index 00000000..b1666256
--- /dev/null
+++ b/source/l/qt/qt.webkit.glib.diff
@@ -0,0 +1,11 @@
+--- ./src/3rdparty/webkit/Source/JavaScriptCore/wtf/gobject/GTypedefs.h.orig	2012-04-26 14:46:14.000000000 -0500
++++ ./src/3rdparty/webkit/Source/JavaScriptCore/wtf/gobject/GTypedefs.h	2012-08-06 19:53:44.134339082 -0500
+@@ -52,7 +52,7 @@
+ typedef struct _GHashTable GHashTable;
+ typedef struct _GInputStream GInputStream;
+ typedef struct _GList GList;
+-typedef struct _GMutex GMutex;
++typedef union _GMutex GMutex;
+ typedef struct _GPatternSpec GPatternSpec;
+ typedef struct _GPollableOutputStream GPollableOutputStream;
+ typedef struct _GSocketClient GSocketClient;
diff --git a/source/l/qt/qt.x86.cflags.diff b/source/l/qt/qt.x86.cflags.diff
deleted file mode 100644
index a9e65fbb..00000000
--- a/source/l/qt/qt.x86.cflags.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- qt.orig/mkspecs/common/g++.conf	2007-12-22 00:22:18.295453075 -0600
-+++ qt/mkspecs/common/g++.conf	2007-12-22 00:23:07.514257895 -0600
-@@ -7,7 +7,7 @@
- QMAKE_CFLAGS_DEPS	+= -M
- QMAKE_CFLAGS_WARN_ON	+= -Wall -W
- QMAKE_CFLAGS_WARN_OFF	+= -w
--QMAKE_CFLAGS_RELEASE	+= -O2
-+QMAKE_CFLAGS_RELEASE	+= -O2 -march=i486 -mtune=i686
- QMAKE_CFLAGS_DEBUG	+= -g
- QMAKE_CFLAGS_SHLIB	+= -fPIC
- QMAKE_CFLAGS_STATIC_LIB	+= -fPIC
diff --git a/source/l/qt/slack-desc b/source/l/qt/slack-desc
index 3f77a7fb..f511d899 100644
--- a/source/l/qt/slack-desc
+++ b/source/l/qt/slack-desc
@@ -11,9 +11,9 @@ qt:
 qt: Qt is a complete and well-developed object-oriented framework for
 qt: developing graphical user interface (GUI) applications using C++.
 qt:
+qt: Homepage:  http://qt.nokia.com
 qt:
 qt:
 qt:
 qt:
-qt: Homepage:  http://qt.nokia.com
 qt:
diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild
index 9664ddb2..f1bf2a15 100755
--- a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild
+++ b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild
@@ -3,7 +3,7 @@
 # Slackware build script for qtscriptgenerator
 
 # Copyright 2009  Heinz Wiesinger <pprkut@liwjatan.at>
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,9 +23,9 @@
 # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-PRGNAM=qtscriptgenerator
-VERSION=${VERSION:-0.1.0}
-BUILD=${BUILD:-2}
+PKGNAM=qtscriptgenerator
+VERSION=${VERSION:-0.2.0}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -39,7 +39,7 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -72,11 +72,9 @@ fi
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf $PRGNAM-src-$VERSION
-tar xvf $CWD/$PRGNAM-src-$VERSION.tar.?z* || exit 1
-cd $PRGNAM-src-$VERSION || exit 1
-
-zcat $CWD/qtscriptgenerator.gcc44.diff.gz | patch -p1 --verbose || exit 1
+rm -rf $PKGNAM-src-$VERSION
+tar xvf $CWD/$PKGNAM-src-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-src-$VERSION || exit 1
 
 chown -R root:root .
 find . \
@@ -117,15 +115,15 @@ cp -a plugins/script/libqtscript* $PKG/usr/lib${LIBDIRSUFFIX}/qt/plugins/script/
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a tools/qsexec/README.TXT README.qsexec
 cp -a \
   LICENSE.GPL README* \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff b/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff
deleted file mode 100644
index 165c97df..00000000
--- a/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff
+++ /dev/null
@@ -1,10 +0,0 @@
---- ./generator/parser/rpp/pp-internal.h.orig	2009-02-20 05:42:24.000000000 -0600
-+++ ./generator/parser/rpp/pp-internal.h	2010-02-18 19:12:22.000000000 -0600
-@@ -16,6 +16,7 @@
- #define PP_INTERNAL_H
- 
- #include <algorithm>
-+#include <cstdio>
- 
- namespace rpp {
- 
diff --git a/source/l/qtscriptgenerator/slack-desc b/source/l/qtscriptgenerator/slack-desc
index f24e9f67..16f2ba05 100644
--- a/source/l/qtscriptgenerator/slack-desc
+++ b/source/l/qtscriptgenerator/slack-desc
@@ -5,15 +5,15 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-                 |-----handy-ruler-------------------------------------------|
+                 |-----handy-ruler------------------------------------------------------|
 qtscriptgenerator: qtscriptgenerator (Qt API Bindings for QtScript)
 qtscriptgenerator:
-qtscriptgenerator: Qt Script Generator is a tool that generates Qt bindings
-qtscriptgenerator: for Qt Script. With the generated bindings you get access
-qtscriptgenerator: to substantial portions of the Qt API from within Qt
-qtscriptgenerator: Script.
+qtscriptgenerator: Qt Script Generator is a tool that generates Qt bindings for Qt
+qtscriptgenerator: Script.  With the generated bindings you get access to substantial
+qtscriptgenerator: portions of the Qt API from within Qt Script.
+qtscriptgenerator:
+qtscriptgenerator: Homepage: http://code.google.com/p/qtscriptgenerator/
 qtscriptgenerator:
 qtscriptgenerator:
 qtscriptgenerator:
-qtscriptgenerator: Homepage: http://code.google.com/p/qtscriptgenerator/
 qtscriptgenerator:
diff --git a/source/l/raptor/raptor.SlackBuild b/source/l/raptor/raptor.SlackBuild
deleted file mode 100755
index 1c57b5d0..00000000
--- a/source/l/raptor/raptor.SlackBuild
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/bin/sh
-
-# Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robby Workman <rworkman@slackware.com>
-# No added terms or copyright claims
-
-
-VERSION=${VERSION:-$(echo raptor-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-raptor
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf raptor-$VERSION
-tar xvf $CWD/raptor-$VERSION.tar.xz || exit 1
-cd raptor-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --disable-static \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
-
-mkdir -p $PKG/usr/doc/raptor-$VERSION
-cp -a \
-  AUTHORS COPYING* INSTALL* LICENSE* NEWS* \
-  NOTICE README* RELEASE.html \
-  $PKG/usr/doc/raptor-$VERSION
-( cd $PKG/usr/doc/raptor-$VERSION
-  ln -s /usr/share/gtk-doc/html/raptor html
-)
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/raptor-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/l/raptor/raptor.info b/source/l/raptor/raptor.info
deleted file mode 100644
index 0f2bae33..00000000
--- a/source/l/raptor/raptor.info
+++ /dev/null
@@ -1,2 +0,0 @@
-HOMEPAGE="http://librdf.org/"
-DOWNLOAD="http://download.librdf.org/source/raptor-1.4.18.tar.gz"
diff --git a/source/l/raptor/slack-desc b/source/l/raptor/slack-desc
deleted file mode 100644
index e15154b7..00000000
--- a/source/l/raptor/slack-desc
+++ /dev/null
@@ -1,12 +0,0 @@
-      |-----handy-ruler------------------------------------------------------|
-raptor: raptor (RDF Parser & Serializer)
-raptor:
-raptor: Raptor is a free software/Open Source C library that provides a set of
-raptor: parsers and serializers that generate Resource Description Framework
-raptor: (RDF) triples by parsing syntaxes or serialize the triples into a
-raptor: syntax.  The supported parsing syntaxes are RDF/XML, N-Triples, TRiG,
-raptor: Turtle, RSS tag soup including all versions of RSS, Atom 1.0 and 0.3,
-raptor: GRDDL and microformats for HTML, XHTML and XML.
-raptor:
-raptor: Homepage:  http://librdf.org/
-raptor:
diff --git a/source/l/raptor2/raptor2.SlackBuild b/source/l/raptor2/raptor2.SlackBuild
index 4b024ce4..38c596ba 100755
--- a/source/l/raptor2/raptor2.SlackBuild
+++ b/source/l/raptor2/raptor2.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2012  Heinz Wiesinger, Amsterdam, NL
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,6 +22,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 # Modified by Robby Workman <rworkman@slackware.com>
+# Modified by Eric Hameleers <alien@slackware.com>
 # No added terms or copyright claims
 
 
@@ -29,22 +30,20 @@ PKGNAM=raptor2
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -54,11 +53,23 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -81,7 +92,8 @@ CXXFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --disable-static \
-  --build=$ARCH-slackware-linux
+  --with-icu-config=/usr/bin/icu-config \
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/raptor2/slack-desc b/source/l/raptor2/slack-desc
index d5f1d463..309b74a1 100644
--- a/source/l/raptor2/slack-desc
+++ b/source/l/raptor2/slack-desc
@@ -1,3 +1,10 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
        |-----handy-ruler------------------------------------------------------|
 raptor2: raptor2 (RDF Parser & Serializer)
 raptor2:
diff --git a/source/l/rasqal/rasqal.SlackBuild b/source/l/rasqal/rasqal.SlackBuild
index 435991a0..0da299dd 100755
--- a/source/l/rasqal/rasqal.SlackBuild
+++ b/source/l/rasqal/rasqal.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -29,22 +29,20 @@ PKGNAM=rasqal
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -54,11 +52,23 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -81,7 +91,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --disable-static \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/rasqal/slack-desc b/source/l/rasqal/slack-desc
index 46e8b19c..00e549d0 100644
--- a/source/l/rasqal/slack-desc
+++ b/source/l/rasqal/slack-desc
@@ -1,3 +1,10 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
       |-----handy-ruler------------------------------------------------------|
 rasqal: rasqal (RDF parsing library)
 rasqal:
@@ -7,6 +14,6 @@ rasqal: constructing the queries, executing them and returning result formats.
 rasqal: It currently handles the RDF Data Query Language (RDQL) and SPARQL
 rasqal: Query language.
 rasqal:
-rasqal:
 rasqal: Homepage:  http://librdf.org/
 rasqal:
+rasqal:
diff --git a/source/l/redland/redland.SlackBuild b/source/l/redland/redland.SlackBuild
index 1849481e..16d90675 100755
--- a/source/l/redland/redland.SlackBuild
+++ b/source/l/redland/redland.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Heinz Wiesinger <hmwiesinger@gmx.at>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -28,24 +28,22 @@
 
 PKGNAM=redland
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -55,11 +53,23 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -95,8 +105,9 @@ CXXFLAGS="$SLKCFLAGS" \
   --disable-static \
   --with-included-ltdl=no \
   --with-bdb-lib=/usr/lib${LIBDIRSUFFIX} \
+  --with-bdb-dbname=db-4.4 \
   --with-threads \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 # Prevent error "No rule to make target `-lltdl', needed by `librdf.la'"
 sed -i -e 's# -lltdl$# #' -e '/^LIBS =/s# = # = -lltdl #' src/Makefile
diff --git a/source/l/redland/slack-desc b/source/l/redland/slack-desc
index db035907..f16c1d45 100644
--- a/source/l/redland/slack-desc
+++ b/source/l/redland/slack-desc
@@ -1,3 +1,10 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
        |-----handy-ruler----------------------------------------------------|
 redland: redland (RDF high-level interface library)
 redland:
diff --git a/source/l/sg3_utils/sg3_utils.SlackBuild b/source/l/sg3_utils/sg3_utils.SlackBuild
new file mode 100755
index 00000000..935f6f8c
--- /dev/null
+++ b/source/l/sg3_utils/sg3_utils.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Slackware build script for sg3_utils
+
+# Copyright 2010  Robby Workman  Northport, AL, USA
+# Copyright 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=sg3_utils
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$TARGET
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS BSD_LICENSE COPYING COVERAGE CREDITS ChangeLog NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/sg3_utils/sg3_utils.info b/source/l/sg3_utils/sg3_utils.info
new file mode 100644
index 00000000..f429377e
--- /dev/null
+++ b/source/l/sg3_utils/sg3_utils.info
@@ -0,0 +1 @@
+http://sg.danny.cz/sg/p/
diff --git a/source/l/sg3_utils/slack-desc b/source/l/sg3_utils/slack-desc
new file mode 100644
index 00000000..b086caf6
--- /dev/null
+++ b/source/l/sg3_utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+sg3_utils: sg3_utils (utilities and test programs for the linux sg driver)
+sg3_utils:
+sg3_utils: This package contains low level utilities for devices that use a SCSI
+sg3_utils: command set. Apart from SCSI parallel interface (SPI) devices, the 
+sg3_utils: SCSI command set is used by ATAPI devices (CD/DVDs and tapes), USB 
+sg3_utils: mass storage devices, Fibre Channel disks, IEEE 1394 storage devices
+sg3_utils: (that use the "SBP" protocol), SAS, iSCSI and FCoE devices (among 
+sg3_utils: others).
+sg3_utils:
+sg3_utils: Homepage: http://sg.danny.cz/sg/sg3_utils.html
+sg3_utils:
diff --git a/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild
index eb0f00ad..76ae4733 100755
--- a/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild
+++ b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,24 +21,24 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-0.5}
+PKGNAM=shared-desktop-ontologies
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:--j6}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-shared-desktop-ontologies
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -48,17 +48,24 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf shared-desktop-ontologies-$VERSION
-tar xvf $CWD/shared-desktop-ontologies-$VERSION.tar.?z* || exit 1
-cd shared-desktop-ontologies-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -86,10 +93,10 @@ cd -
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/shared-desktop-ontologies-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS LICENSE* README \
-  $PKG/usr/doc/shared-desktop-ontologies-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
@@ -103,5 +110,5 @@ mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/shared-desktop-ontologies-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/shared-desktop-ontologies/slack-desc b/source/l/shared-desktop-ontologies/slack-desc
index 8057846b..18412ab5 100644
--- a/source/l/shared-desktop-ontologies/slack-desc
+++ b/source/l/shared-desktop-ontologies/slack-desc
@@ -13,7 +13,7 @@ shared-desktop-ontologies: the desktop in terms of vocabulary. It contains the w
 shared-desktop-ontologies: ontologies such as RDF and RDFS as well as the Nepomuk ontologies
 shared-desktop-ontologies: which are used by projects like KDE or Strigi.
 shared-desktop-ontologies:
+shared-desktop-ontologies: Homepage: http://oscaf.sourceforge.net
 shared-desktop-ontologies:
 shared-desktop-ontologies:
-shared-desktop-ontologies: Homepage: http://oscaf.sourceforge.net
 shared-desktop-ontologies:
diff --git a/source/l/shared-mime-info/doinst.sh b/source/l/shared-mime-info/doinst.sh
index 38726225..6c596b73 100644
--- a/source/l/shared-mime-info/doinst.sh
+++ b/source/l/shared-mime-info/doinst.sh
@@ -6,7 +6,7 @@ if [ -x /usr/bin/update-mime-database ]; then
     if [ -d $homedir/.local/share/mime ]; then
       username=$(echo $passwdline | cut -f 1 -d :)
       # Sorry about the long command line, alienBOB  ;-)
-      su $username -c "/usr/bin/update-mime-database $homemimedir 1>/dev/null 2>/dev/null" 2> /dev/null
+      su $username -c "/usr/bin/update-mime-database $homedir/.local/share/mime 1>/dev/null 2>/dev/null" 2> /dev/null
     fi
   done
   # This is just "cleanup" in case something might be missed in /home/*/
diff --git a/source/l/shared-mime-info/shared-mime-info.SlackBuild b/source/l/shared-mime-info/shared-mime-info.SlackBuild
index 81d5f01b..ed72d9ba 100755
--- a/source/l/shared-mime-info/shared-mime-info.SlackBuild
+++ b/source/l/shared-mime-info/shared-mime-info.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=shared-mime-info
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -75,10 +75,10 @@ CFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --docdir=/usr/doc/${PKGNAM}-$VERSION \
   --disable-update-mimedb \
-  --build=$ARCH-slackware-linux
+  --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG
+make install DESTDIR=$PKG || exit 1
 
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
 mv $PKG/usr/share/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX}
@@ -93,10 +93,20 @@ chmod 755 $PKG/var/log/setup/setup.07.update-mime-database
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
diff --git a/source/l/sip/sip.SlackBuild b/source/l/sip/sip.SlackBuild
index 687d76f9..4412ea25 100755
--- a/source/l/sip/sip.SlackBuild
+++ b/source/l/sip/sip.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008  Aleksandar Samardzic <asamardzic@gmail.com>
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,22 +22,24 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 # Modified by Robby Workman <rworkman@slackware.com>
+# Modified by Eric Hameleers <alien@slackware.com>
 
 
-VERSION=${VERSION:-4.11.2}
-BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:--j6}
+PKGNAM=sip
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-sip
+NUMJOBS=${NUMJOBS:--j7}
 
-# Automatically determine architecture for build & packaging:
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-    *)    export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
@@ -47,6 +49,8 @@ elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else
   SLKCFLAGS="-O2"
 fi
@@ -54,12 +58,16 @@ fi
 PYTHONVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.)
 PYTHONLIB=$( python -c 'from distutils.sysconfig import get_python_lib; print get_python_lib()' )
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
-rm -rf sip-$VERSION
-tar xvf $CWD/sip-$VERSION.tar.?z* || exit 1
-cd sip-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -80,15 +88,15 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/sip-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   LICENSE COPYING* NEWS README TODO doc/* \
-  $PKG/usr/doc/sip-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 chown -R root:root $PKG/usr/doc
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/sip-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz
 
diff --git a/source/l/sip/slack-desc b/source/l/sip/slack-desc
index 01147eea..d2fae243 100644
--- a/source/l/sip/slack-desc
+++ b/source/l/sip/slack-desc
@@ -13,7 +13,7 @@ sip: C and C++ libraries.  It was originally developed to create PyQt,
 sip: the Python bindings for the Qt toolkit, but can be used to create
 sip: bindings for any C or C++ library.
 sip:
+sip: Homepage:  http://www.riverbankcomputing.co.uk/software/sip/
 sip:
 sip:
-sip: Homepage:  http://www.riverbankcomputing.co.uk/software/sip/
 sip:
diff --git a/source/l/soprano/slack-desc b/source/l/soprano/slack-desc
index 1cb3f2f8..44327e07 100644
--- a/source/l/soprano/slack-desc
+++ b/source/l/soprano/slack-desc
@@ -5,7 +5,7 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-      |-----handy-ruler-----------------------------------------------------|
+       |-----handy-ruler-----------------------------------------------------|
 soprano: soprano (C++/Qt4 framework for RDF data)
 soprano:
 soprano: Soprano (formally known as QRDF) is a library which provides 
@@ -13,7 +13,7 @@ soprano: a nice Qt interface to RDF storage solutions.  It has a modular
 soprano: structure which allows to replace the actual RDF storage 
 soprano: implementation used. 
 soprano:
+soprano: Homepage:  http://soprano.sourceforge.net/
 soprano:
 soprano:
-soprano: Homepage:  http://soprano.sourceforge.net/
 soprano:
diff --git a/source/l/soprano/soprano.SlackBuild b/source/l/soprano/soprano.SlackBuild
index 054fb20b..5ddd9f99 100755
--- a/source/l/soprano/soprano.SlackBuild
+++ b/source/l/soprano/soprano.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -21,27 +21,27 @@
 # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
 
 PKGNAM=soprano
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:--j6}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-soprano
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -51,24 +51,21 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-soprano
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-
-# Detect JDK, needed for libsoprano_sesame2backend.so:
-if ! ls /var/log/packages/jdk-* 1> /dev/null 2> /dev/null ; then
-  echo
-  echo "JDK package not found in /var/log/packages."
-  echo "This is needed to compile libsoprano_sesame2backend.so."
-  echo
-  exit 1
-fi
-
 rm -rf soprano-$VERSION
 tar xvf $CWD/soprano-$VERSION.tar.bz2 || exit 1
 cd soprano-$VERSION || exit 1
diff --git a/source/l/sound-theme-freedesktop/slack-desc b/source/l/sound-theme-freedesktop/slack-desc
new file mode 100644
index 00000000..78db32b4
--- /dev/null
+++ b/source/l/sound-theme-freedesktop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                       |-----handy-ruler------------------------------------------------------|
+sound-theme-freedesktop: sound-theme-freedesktop (freedesktop.org sound theme)
+sound-theme-freedesktop:
+sound-theme-freedesktop: The freedesktop.org sound theme is a basic set of sounds for
+sound-theme-freedesktop: applications to use.
+sound-theme-freedesktop:
+sound-theme-freedesktop: Homepage: http://freedesktop.org/wiki/Specifications/sound-theme-spec
+sound-theme-freedesktop:
+sound-theme-freedesktop:
+sound-theme-freedesktop:
+sound-theme-freedesktop:
+sound-theme-freedesktop:
diff --git a/source/l/sound-theme-freedesktop/sound-theme-freedesktop.SlackBuild b/source/l/sound-theme-freedesktop/sound-theme-freedesktop.SlackBuild
new file mode 100755
index 00000000..e9ab1b54
--- /dev/null
+++ b/source/l/sound-theme-freedesktop/sound-theme-freedesktop.SlackBuild
@@ -0,0 +1,73 @@
+#!/bin/sh
+
+# Slackware build script for sound-theme-freedesktop
+
+# Copyright 2010, 2011, 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=sound-theme-freedesktop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+ARCH=noarch
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+./configure \
+  --prefix=/usr \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/sound-theme-freedesktop/sound-theme-freedesktop.url b/source/l/sound-theme-freedesktop/sound-theme-freedesktop.url
new file mode 100644
index 00000000..5964491b
--- /dev/null
+++ b/source/l/sound-theme-freedesktop/sound-theme-freedesktop.url
@@ -0,0 +1,2 @@
+http://freedesktop.org/wiki/Specifications/sound-theme-spec
+http://people.freedesktop.org/~mccann/dist/
diff --git a/source/l/startup-notification/startup-notification.SlackBuild b/source/l/startup-notification/startup-notification.SlackBuild
index c247069f..6fce983e 100755
--- a/source/l/startup-notification/startup-notification.SlackBuild
+++ b/source/l/startup-notification/startup-notification.SlackBuild
@@ -59,7 +59,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf startup-notification-$VERSION
-tar xvf $CWD/startup-notification-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/startup-notification-$VERSION.tar.xz || exit 1
 cd startup-notification-$VERSION
 chown -R root:root .
 find . \
diff --git a/source/l/strigi/README b/source/l/strigi/README
new file mode 100644
index 00000000..218e8ce2
--- /dev/null
+++ b/source/l/strigi/README
@@ -0,0 +1,17 @@
+trueg's blog,
+http://trueg.wordpress.com/2011/09/22/about-strigi-soprano-virtuoso-clucene-and-libstreamanalyzer/
+
+recommends using a newer libstreamanalyzer (and friends) than what is currently formally released.
+
+I ran the script
+https://projects.kde.org/projects/kdesupport/strigi/strigi/repository/revisions/master/changes/createtararchive.sh
+to generate a tarball, and am hosting it at:
+
+http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2
+http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2.md5sum
+http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2.sha1sum
+
+for others' convenience.
+
+-- rex
+
diff --git a/source/l/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff b/source/l/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff
new file mode 100644
index 00000000..d4721c39
--- /dev/null
+++ b/source/l/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff
@@ -0,0 +1,16 @@
+Description: Fix FTBFS with gcc 4.7 due to missing <unistd.h> include.
+Author: Cyril Brulebois <kibi@debian.org>
+Bug-Debian: http://bugs.debian.org/667384
+
+--- strigi-0.7.7.orig/strigidaemon/bin/daemon/eventlistener/eventlistenerqueue.cpp
++++ strigi-0.7.7/strigidaemon/bin/daemon/eventlistener/eventlistenerqueue.cpp
+@@ -27,9 +27,7 @@
+ #include <iostream>
+ #include <stdio.h>
+ 
+-#if defined(__SUNPRO_CC)
+ #include <unistd.h>
+-#endif
+ 
+ using namespace std;
+ 
diff --git a/source/l/strigi/strigi.SlackBuild b/source/l/strigi/strigi.SlackBuild
index c7cdaa79..8b7374fc 100755
--- a/source/l/strigi/strigi.SlackBuild
+++ b/source/l/strigi/strigi.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -21,25 +21,27 @@
 # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
 
-VERSION=${VERSION:-$(echo strigi-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+
+PKGNAM=strigi
+VERSION=${VERSION:-0.7.7}
 BUILD=${BUILD:-2}
 
+NUMJOBS=${NUMJOBS:--j7}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-strigi
-NUMJOBS=${NUMJOBS:--j6}
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -49,17 +51,27 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf strigi-$VERSION
-tar xvf $CWD/strigi-$VERSION.tar.?z* || exit 1
-cd strigi-$VERSION || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/strigi-fix-ftbfs-with-gcc-4.7.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -88,10 +100,10 @@ cd -
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/strigi-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING NEWS README TODO \
-  $PKG/usr/doc/strigi-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
@@ -105,5 +117,5 @@ mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/strigi-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/l/system-config-printer/doinst.sh b/source/l/system-config-printer/doinst.sh
index 214038e7..884cda80 100644
--- a/source/l/system-config-printer/doinst.sh
+++ b/source/l/system-config-printer/doinst.sh
@@ -11,8 +11,8 @@ config() {
   # Otherwise, we leave the .new copy for the admin to consider...
 }
 
-config etc/dbus-1/system.d/newprinternotification.conf.new
-config etc/dbus-1/system.d/printerdriversinstaller.conf.new
+config etc/dbus-1/system.d/com.redhat.NewPrinterNotification.conf.new
+config etc/dbus-1/system.d/com.redhat.PrinterDriversInstaller.conf.new
 
 # Update the desktop database:
 if [ -x usr/bin/update-desktop-database ]; then
diff --git a/source/l/system-config-printer/system-config-printer.SlackBuild b/source/l/system-config-printer/system-config-printer.SlackBuild
index 8ba12a89..fafaba72 100755
--- a/source/l/system-config-printer/system-config-printer.SlackBuild
+++ b/source/l/system-config-printer/system-config-printer.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
+# Copyright 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -23,27 +23,25 @@
 #   SUCH DAMAGE.
 # -----------------------------------------------------------------------------
 
-# Set initial variables:
 
 PKGNAM=system-config-printer
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
-NUMJOBS=${NUMJOBS:" -j4 "}
+
+NUMJOBS=${NUMJOBS:" -j7 "}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -53,11 +51,23 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -87,19 +97,23 @@ CFLAGS="$SLKCFLAGS" \
   --with-udev-rules \
   --program-prefix= \
   --program-suffix= \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 # Build and install:
-make $NUMJOBS udevrulesdir=/lib/udev/rules.d udevhelperdir=/lib/udev || make || exit 1
-make install DESTDIR=$PKG udevrulesdir=/lib/udev/rules.d udevhelperdir=/lib/udev || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+# Move the udev files to the usual Slackware location:
+mkdir -p $PKG/lib
+mv $PKG/etc/udev $PKG/lib/
 
 # Slackware does not use PAM.  Instead, your user must be in group 'lp'.
 sed -i -e 's/at_console="true"/group="lp"/g' \
   $PKG/etc/dbus-1/system.d/newprinternotification.conf
 
 # Don't clobber the configuration file:
-mv $PKG/etc/dbus-1/system.d/newprinternotification.conf{,.new}
-mv $PKG/etc/dbus-1/system.d/printerdriversinstaller.conf{,.new}
+mv $PKG/etc/dbus-1/system.d/com.redhat.NewPrinterNotification.conf{,.new}
+mv $PKG/etc/dbus-1/system.d/com.redhat.PrinterDriversInstaller.conf{,.new}
 
 # Add documentation:
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
diff --git a/source/l/t1lib/t1lib.SlackBuild b/source/l/t1lib/t1lib.SlackBuild
index 86002a21..dc6c69b0 100755
--- a/source/l/t1lib/t1lib.SlackBuild
+++ b/source/l/t1lib/t1lib.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=t1lib
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -60,7 +60,7 @@ tar xvf $CWD/t1lib-$VERSION.tar.?z* || exit 1
 cd t1lib-$VERSION
 
 # Apply Debian's patch since upstream seems inactive:
-zcat $CWD/t1lib_5.1.2-3.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/t1lib_5.1.2-3.5.diff.gz | patch -p1 --verbose || exit 1
 
 # I don't think anyone is applying this first one:
 #cat debian/patches/segfault.diff -b -z .segf | patch -p1 --verbose || exit 1
@@ -68,6 +68,10 @@ zcat $CWD/t1lib_5.1.2-3.diff.gz | patch -p1 --verbose || exit 1
 cat debian/patches/no-config.diff | patch -p1 --verbose || exit 1
 cat debian/patches/no-docs.diff | patch -p1 --verbose || exit 1
 cat debian/patches/lib-cleanup.diff | patch -p1 --verbose || exit 1
+cat debian/patches/format-security.diff | patch -p1 --verbose || exit 1
+cat debian/patches/CVE-2011-0764.diff | patch -p1 --verbose || exit 1
+cat debian/patches/CVE-2011-1552_1553_1554.patch | patch -p1 --verbose || exit 1
+cat debian/patches/CVE-2010-2642.patch | patch -p1 --verbose || exit 1
 
 chown -R root:root .
 find . \
diff --git a/source/l/t1lib/t1lib_5.1.2-3.5.diff b/source/l/t1lib/t1lib_5.1.2-3.5.diff
new file mode 100644
index 00000000..bd137466
--- /dev/null
+++ b/source/l/t1lib/t1lib_5.1.2-3.5.diff
@@ -0,0 +1,2109 @@
+--- t1lib-5.1.2.orig/debian/libt1-doc.docs
++++ t1lib-5.1.2/debian/libt1-doc.docs
+@@ -0,0 +1 @@
++doc/*.pdf
+--- t1lib-5.1.2.orig/debian/orig-tar.sh
++++ t1lib-5.1.2/debian/orig-tar.sh
+@@ -0,0 +1,11 @@
++#!/bin/sh -e
++
++# called by uscan with '--upstream-version' <version> <file>
++
++# move to directory 'tarballs'
++if [ -r .svn/deb-layout ]; then
++  . .svn/deb-layout
++  mv $3 $origDir
++  echo "moved $3 to $origDir"
++fi
++
+--- t1lib-5.1.2.orig/debian/libt1-5.install
++++ t1lib-5.1.2/debian/libt1-5.install
+@@ -0,0 +1 @@
++debian/tmp/usr/lib/libt1*.so.*
+--- t1lib-5.1.2.orig/debian/changelog
++++ t1lib-5.1.2/debian/changelog
+@@ -0,0 +1,456 @@
++t1lib (5.1.2-3.5) unstable; urgency=high
++
++  * Non-maintainer upload by the Security Team.
++  * Thanks Jamie Strandboge from Ubuntu for the patch.
++  * debian/patches:
++    - series: make sure CVE-2010-2642.patch is really applied so CVE-2010-2642
++      (denial of service via oversized fonts) is really fixed.
++    - CVE-2011-1552_1553_1554 added, few more fixes for CVE-2011-1552, 
++      CVE-2011-1553 and CVE-2011-1554 (heap-based buffer overflow via AFM font
++      parser)
++
++ -- Yves-Alexis Perez <corsac@debian.org>  Wed, 18 Jan 2012 10:43:23 +0100
++
++t1lib (5.1.2-3.4) unstable; urgency=high
++
++  * Non-maintainer upload by the Security Team.
++  * debian/patches:
++    - CVE-2010-2642 added, fix heap-based buffer overflow first found in
++      evince but applicable to the embedded afmparse library found in t1lib
++      too. Fixes CVE-2011-0433 too on the same patch.
++
++ -- Yves-Alexis Perez <corsac@debian.org>  Sun, 15 Jan 2012 13:47:26 +0100
++
++t1lib (5.1.2-3.3) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Fix arbitrary code execution CVE-2011-0764 by only using ppoints when
++    it is a valid pointer (Closes: #652996).
++  * Don't ship .la file anymore (Closes: #633247).
++
++ -- Luk Claes <luk@debian.org>  Thu, 29 Dec 2011 23:21:33 +0100
++
++t1lib (5.1.2-3.2) unstable; urgency=low
++
++  * Non-maintainer upload. (version 5.1.2-3.2 triggered a problem with dak)
++  * format-security.diff: use relevant "%s" format when passing a 
++    variable string to a printf() function and replace printf() 
++    with puts() for the model-only IfTrace0 macro. Thanks to Colin Watson
++    and Loïc Minier! (Closes: #646470) 
++
++ -- Mònica Ramírez Arceda <monica@probeta.net>  Sat, 03 Dec 2011 21:28:31 +0100
++
++t1lib (5.1.2-3) unstable; urgency=low
++
++  * New Maintainer (Closes: #430611) 
++  * Solved some hyphen-used-as-minus-sign in FontDatabase.5
++  * Reformated debian/copyrigth
++  * Added symbols control file 
++
++ -- Ruben Molina <rmolina@udea.edu.co>  Wed, 23 Jul 2008 20:24:22 -0500
++
++t1lib (5.1.2-2) unstable; urgency=low
++
++  * Add a package with debugging information.
++
++ -- Torsten Werner <twerner@debian.org>  Sat, 08 Mar 2008 10:21:43 +0100
++
++t1lib (5.1.2-1) unstable; urgency=low
++
++  * new upstream release
++  * Correct debian/watch.
++  * Remove patch cve-2007-4033.diff because it has been integrated upstream.
++  * Remove parts of patch segfault.diff that have been integrated upstream.
++  * Do not apply the remaining segfault.diff because it does not look safe but
++    keep the patch as a reminder that something was broken in the past.
++
++ -- Torsten Werner <twerner@debian.org>  Sat, 08 Mar 2008 10:07:54 +0100
++
++t1lib (5.1.1-5) unstable; urgency=low
++
++  * Replace Build-Depends-Indep by Build-Depends again.
++
++ -- Torsten Werner <twerner@debian.org>  Tue, 08 Jan 2008 21:34:25 +0100
++
++t1lib (5.1.1-4) unstable; urgency=low
++
++  * Add Build-Depends-Indep: libxt-dev. (Closes: #459754)
++
++ -- Torsten Werner <twerner@debian.org>  Tue, 08 Jan 2008 20:29:01 +0100
++
++t1lib (5.1.1-3) unstable; urgency=low
++
++  * Replace static changes of upstream files by quilt patches as requested by
++    Fedora developers.
++  * Remove postinst that removed the old /usr/doc symlink.
++  * Remove preinst that removed the old /usr/share/doc/t1lib-bin symlink.
++  * Rename menu.t1lib-bin to t1lib-bin.menu to make sure the menu file gets
++    installed.
++  * Update menu file to conform to current menu policy.
++  * Install documentation with dh_installdocs instead of dh_install and some
++    other minor cleanups.
++  * Switch to cdbs.
++  * Fix versioned Build-Depends: debhelper (>= 5).
++  * Move some Build-Depends to Build-Depends-Indep.
++  * Apply two patches provided by Patrice Dumas:
++    - Update t1libconfig's font search.
++    - Fixes a segfault.
++  * Integrate another patch that fixes a segfault. (Closes: #313236)
++
++ -- Torsten Werner <twerner@debian.org>  Sun, 06 Jan 2008 20:50:19 +0100
++
++t1lib (5.1.1-2) unstable; urgency=low
++
++  * Add Depends: libxaw7-dev to -dev package.
++  * Switch to DH_COMPAT = 5.
++  * Update Vcs headers in debian/control.
++  * Change Standards-Version: 3.7.3.
++  * Do not link with unneeded libraries.
++  * Add LDFLAGS=-Wl,--as-needed.
++
++ -- Torsten Werner <twerner@debian.org>  Fri, 21 Dec 2007 22:54:43 +0100
++
++t1lib (5.1.1-1) unstable; urgency=low
++
++  * new upstream version (Closes: #418664)
++  * Add XS-Vcs-* header to debian/control.
++  * Update Standards-Version to 3.7.2 (no changes).
++  * Remove Depends: libc6-dev. (Closes: #446375).
++  * Change Maintainer to myself.
++  * Replace ${Source-Version} by ${binary:Version}.
++  * Do not ignore errors of 'make distclean'.
++
++ -- Torsten Werner <twerner@debian.org>  Sat, 13 Oct 2007 14:46:23 +0200
++
++t1lib (5.1.0-3) unstable; urgency=low
++
++  * Apply patch from Artur R. Czechowski to fix CVE-2007-4033.
++    (Closes: #439927)
++
++ -- Torsten Werner <twerner@debian.org>  Mon, 17 Sep 2007 23:25:45 +0200
++
++t1lib (5.1.0-2) unstable; urgency=low
++
++  * Upload to unstable
++  * Bump-up Standards-Version to 3.6.2 (no changes required)
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sat,  6 Aug 2005 20:11:51 +0200
++
++t1lib (5.1.0-1) experimental; urgency=low
++
++  * New upstream release
++  * README.t1lib-5.0.2 replaced with README.t1lib-5.1.0
++  * README.win32 is no longer installed
++  * Removed misleading information from README.Debian
++  * Replace -V with -V 'libt1-5 (>= 5.0.2)' for dh_makeshlibs in debian/rules
++  * Remove some commented stuff from debian/rules
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sat,  4 Jun 2005 22:12:43 +0200
++
++t1lib (5.0.2-3) unstable; urgency=low
++
++  * Update libtool (Closes: #246753)
++  * Build-Depends on individual library instead dummy xlibs-dev
++  * Added dependencies to -dev package (Closes: #249973)
++  * Thanks to Christopher L Cheney for above patches
++  * Add -V to dh_makeshlibs to make a versioned dependencies on this library
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 23 May 2004 01:02:02 +0200
++
++t1lib (5.0.2-2) unstable; urgency=low
++
++  * change distribution to unstable
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Apr 2004 13:07:23 +0200
++
++t1lib (5.0.2-1) experimental; urgency=low
++
++  * New upstream release (Closes: #243916)
++    - fixed some crashes (Closes: #242570, #243378)
++  * Reference to README.t1lib-5.0.2 instead -5.0.0 in some debian/ files
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sat, 17 Apr 2004 19:22:09 +0200
++
++t1lib (5.0.0-5) unstable; urgency=low
++
++  * debian/rules: documentation is build from binary-indep (Closes: #230386)
++  * debian/watch has been added
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sat, 21 Feb 2004 20:19:38 +0100
++
++t1lib (5.0.0-4) unstable; urgency=low
++
++  * Added missing files in NEWS.Debian
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Wed, 21 Jan 2004 00:27:24 +0100
++
++t1lib (5.0.0-3) unstable; urgency=low
++
++  * New release uploaded to unstable (finaly closes: #185097, #216501)
++  * Unleash it to allow to migrate to testing (Closes: #221198)
++  * libt1-dev and t1lib-dev conflict with each other,
++  * libt1-dev conflicts with t1lib1-dev to smooth upgrade from t1lib 1.3.1-6
++  * t1lib-bin provides/conflicts/replaces t1lib1-bin to smooth upgrade from
++    t1lib 1.3.1-6
++  * Some README.* files in libt1-dev
++  * Applied patch which fixes memory access bug (see #224314 for details)
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Jan 2004 03:00:05 +0100
++
++t1lib (5.0.0-2) experimental; urgency=low
++
++  * rename source package to t1lib
++  * rename binary packages:
++    + libt1-5 -> libt1-dev
++    + t1lib5-bin -> t1lib-bin
++    + libt1-5-doc -> libt1-doc
++  * rationale for all above:
++    http://lists.debian.org/debian-devel/2003/debian-devel-200311/msg01083.html
++    and rest of this thread
++  * linking libt1x with X libraries to avoid undefined symbols (see #220111)
++  * clearing independency of X11 in README.Debian
++  * removed all tracks of t1lib0 (Conflict, Replaces, etc)
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Wed, 24 Dec 2003 01:50:37 +0100
++
++t1lib5 (5.0.0-1) experimental; urgency=low
++
++  * New upstream release (Closes: #185097, #216501)
++  * This release is binary incompatible with the previous one.
++  * t1lib-bin and t1lib-dev are virtual packages now
++  * removed weird ``dbl'' from configure - typo in upstream configure.in
++  * there is no necessity to conflict current -doc with the other ones
++  * library, devel and documentation package is libt1-5{,-dev,-doc} to be
++    consistent with Debian Policy 8.1
++  * do not anymore copy config.{sub,guess} automagically
++  * update ac-tools/config.{sub,guess} to 20031007
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun,  9 Nov 2003 15:16:51 +0100
++
++t1lib (1.3.1-4) unstable; urgency=low
++
++  * New Maintainer, Adopted Package (Closes: #189694)
++  * Prepare for migration to t1lib 5.x:
++    - all packages renamed to t1lib1{,-foo}
++    - empty packages t1lib-bin and t1lib-dev depending on t1lib1-bin
++      and t1lib1-dev
++  * Packaging from scratch using debhelper, Standards-Version is 3.6.1.0 now
++  * Remove non-existent xlib6g-dev from Build-Depends
++  * Updated README.Debian
++  * Remove symlinks from /usr/doc/t1lib*
++  * Only t1lib1-bin contains /etc/t1lib directory
++  * t1lib-dev has been split into two packages: t1lib1-dev and t1lib1-doc
++  * t1lib1-bin: change manual section for type1afm from 8 to 1
++  * t1lib1-bin: create files in /etc/t1lib if don't exist (Closes: #58275)
++  * t1lib1-bin: remove symlink /usr/share/doc/t1lib-bin -> t1lib1 if exists
++  * Torsten Werner <twerner@debian.org> is sponsoring the package
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun,  2 Nov 2003 03:47:51 +0100
++
++t1lib (1.3.1-3) unstable; urgency=low
++
++  * Change t1lib-dev's section from "devel" to "libdevel" (thanks, Katie!)
++
++ -- Adam Conrad <adconrad@0c3.net>  Mon, 18 Aug 2003 22:42:17 -0600
++
++t1lib (1.3.1-2) unstable; urgency=low
++
++  * Set maintainer to QA, as this package was orphaned months ago (see #189694)
++  * Change "make" to "make without_doc" and remove build-dep on
++    tetex-bin (closes: #192291, #192290)
++  * Change libxaw-dev build-dep to libxaw7-dev, so we are asking for a real
++    package, rather than a virtual (closes: #170012)
++  * lib/Makefile.in changes (closes: #193757)
++    - add "-lm" to libt1.la target
++    - add "-L@top_srcdir@/lib/.libs/ -lt1" to libt1x.la target
++
++ -- Adam Conrad <adconrad@0c3.net>  Mon, 18 Aug 2003 21:50:22 -0600
++
++t1lib (1.3.1-1) unstable; urgency=low
++
++  * New upstream version.  (Closes: #127619,#127618)
++
++ -- David Huggins-Daines <dhd@debian.org>  Thu,  3 Jan 2002 21:53:29 -0500
++
++t1lib (1.2-1) unstable; urgency=low
++
++  * New upstream version.
++
++ -- David Huggins-Daines <dhd@debian.org>  Wed, 22 Aug 2001 21:16:36 -0400
++
++t1lib (1.1.1-2.2) unstable; urgency=low
++
++  * NMU
++  * debian/rules: if LD_LIBRARY_PATH is already set, append to it, so
++    builds under fakeroot will work (Closes: #104046)
++
++ -- Branden Robinson <branden@debian.org>  Fri, 10 Aug 2001 04:57:50 -0500
++
++t1lib (1.1.1-2.1) unstable; urgency=low
++
++  * NMU, with updated config.{guess,sub} for newer architectures
++
++ -- Randolph Chung <tausq@debian.org>  Sat,  7 Jul 2001 01:01:51 -0600
++
++t1lib (1.1.1-2) unstable; urgency=high
++
++  * Yow!  Major upstream weirdness.  Do *not* try to print the documentation
++    when building...  Closes: #94660
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri, 20 Apr 2001 20:35:49 -0400
++
++t1lib (1.1.1-1) unstable; urgency=low
++
++  * New upstream version.  Closes: #94627 (why did I never get this bug
++    report in the first place?)
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri, 20 Apr 2001 11:16:15 -0400
++
++t1lib (1.0.1-2) unstable; urgency=low
++
++  * Recompile with new XFree86 libraries and glibc.
++
++ -- David Huggins-Daines <dhd@debian.org>  Wed, 24 Jan 2001 22:33:43 -0500
++
++t1lib (1.0.1-1) unstable; urgency=low
++
++  * New upstream version.  Closes: #69689
++
++ -- David Huggins-Daines <dhd@debian.org>  Thu,  9 Nov 2000 00:29:06 -0500
++
++t1lib (1.0-2) frozen unstable; urgency=low
++
++  * Use dpkg-architecture to supply a target architecture name to
++    configure, should fix the compile problems on Alpha and ARM for good.
++    (closes:#57839)
++
++ -- David Huggins-Daines <dhd@eradicator.org>  Wed,  1 Mar 2000 21:22:49 -0500
++
++t1lib (1.0-1) unstable; urgency=low
++
++  * New upstream version.
++  * Twiddled package names to make more sense.
++  * Move back to priority optional to satisfy dependencies of xpdf and
++    php3.
++  * Moved .la files to t1lib-dev.  Added versioned Replaces: field in the
++    control file to cope with potato-to-potato upgrades (the t1lib0
++    packages in slink were not buggy in this way)
++  * t1libconfig and associated manual pages (FontDataBase.5,
++    t1libconfig.8) are now in the t1lib-bin package, for much the same
++    reason.  Unfortunately this Replaces: field cannot be versioned.
++  * The t1lib packages no longer manage the contents of /etc/t1lib/.  In
++    the near future, t1lib1 may have a debconf interface for doing so.
++    The t1lib.config and FontDataBase were never used by any programs that
++    linked with t1lib anyway, thankfully.
++
++ -- David Huggins-Daines <dhd@eradicator.org>  Sun,  2 Jan 2000 03:02:30 -0500
++
++t1lib0 (0.9.2-1) unstable; urgency=low
++
++  * New upstream version.
++  * Being more intelligent in t1libconfig to avoid postinst-lossage.
++    Fixes: #44095
++  * Updated for FHS compliance.
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri,  8 Oct 1999 15:27:46 -0400
++
++t1lib0 (0.9.1-4) unstable; urgency=medium
++
++  * Updated the shlibs file since it appears that programs compiled
++    against 0.9.1 won't work with 0.9 (though the other way around does
++    work).  Fixes: #43215, #43231
++  * Removed ARCH bogosity and updated config.sub and config.guess
++    (upstream maintainer will be notified)
++
++ -- David Huggins-Daines <dhd@debian.org>  Sat, 21 Aug 1999 01:23:39 -0400
++
++t1lib0 (0.9.1-3) unstable; urgency=low
++
++  * Conditionalize that ARCH thing, or the Hurd people will kill me.
++
++ -- David Huggins-Daines <dhd@debian.org>  Sat,  3 Jul 1999 13:56:12 -0400
++
++t1lib0 (0.9.1-2) unstable; urgency=low
++
++  * Oops.  T1lib installs a dummy config file.  We remove this before
++    building the package (because we generate our own).  Also, the preinst
++    has to compensate for the past brokenness by saving it before an
++    upgrade.
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri,  2 Jul 1999 16:13:46 -0400
++
++t1lib0 (0.9.1-1) unstable; urgency=low
++
++  * New upstream version.
++  * Moved back to extra, because that's the way the winds are blowing.
++  * Added ARCH variable to debian/rules to work around strange
++    architecture detection on Alpha.
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri,  2 Jul 1999 14:58:32 -0400
++
++t1lib0 (0.9-1) unstable; urgency=low
++
++  * New upstream version
++
++ -- David Huggins-Daines <dhd@debian.org>  Thu, 10 Jun 1999 23:00:12 -0400
++
++t1lib0 (0.8.1-1) unstable; urgency=low
++
++  * New upstream version.  (fixes bug #31549)
++  * Upstream move to libtool has made debian/rules a lot less contorted,
++    and slimmed up the diff considerably.  Thanks!
++  * I'm now uploading m68k versions as well.
++  * Fixed "confdif" typo in t1libconfig (oops!)
++  * This release breaks binary and source compatibility.  Bumping the
++    soname seems a bit extreme, since there is only one Debian package
++    (gglyph) which depends on this, and I'm simultaneously uploading a
++    fixed version.
++
++ -- David Huggins-Daines <dhd@debian.org>  Wed, 24 Feb 1999 17:16:41 -0500
++
++t1lib0 (0.7.1-5) unstable; urgency=low
++
++  * Changed debian/rules to remove debian/files on clean. (fixes bug #26907)
++  * Changed t1libconfig to allow installation </dev/null (fixes bug #27609)
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri, 16 Oct 1998 20:12:02 -0400
++
++t1lib0 (0.7.1-4) unstable; urgency=low
++
++  * Changed debian/rules not to use debhelper, to fix PowerPC and Alpha compile
++    problems and (hopefully) make the purists happy :)
++  * Upgraded priority to Optional, since it doesn't conflict with or break
++    anything, and is relatively stable.
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri, 18 Sep 1998 18:36:07 -0400
++
++t1lib0 (0.7.1-3) unstable; urgency=low
++
++  * Changed "read" to "read foo" in t1libconfig to make it more sh-friendly.
++  * Minor change to debian/rules (fixes bug #25501)
++
++ -- David Huggins-Daines <dhd@debian.org>  Fri,  7 Aug 1998 13:31:28 -0400
++
++t1lib0 (0.7.1-2) unstable; urgency=low
++
++  * Patched lib/t1lib/t1finfo.c to fix segfault problems with some fonts.
++  * Fixed the URLs and info in copyright and README.Debian.
++
++ -- David Huggins-Daines <dhd@debian.org>  Tue, 21 Jul 1998 16:01:03 -0400
++
++t1lib0 (0.7.1-1) unstable; urgency=low
++
++  * Initial release.
++
++ -- David Huggins-Daines <dhd@debian.org>  Thu, 16 Jul 1998 22:07:08 -0400 
++
++
+--- t1lib-5.1.2.orig/debian/libt1-5.docs
++++ t1lib-5.1.2/debian/libt1-5.docs
+@@ -0,0 +1,2 @@
++README.t1lib-*
++README.t1python
+--- t1lib-5.1.2.orig/debian/libt1-dev.docs
++++ t1lib-5.1.2/debian/libt1-dev.docs
+@@ -0,0 +1,2 @@
++README.t1lib-*
++README.t1python
+--- t1lib-5.1.2.orig/debian/t1libconfig
++++ t1lib-5.1.2/debian/t1libconfig
+@@ -0,0 +1,163 @@
++#!/bin/sh -e
++
++# to test POSIX-correctness, change hash-bang to /bin/bash and uncomment
++# the following line:
++
++# set -o posix
++
++# Very simple configuration script for t1lib.  Checks a couple of
++# directories that might contain fonts, and if they exist, adds
++# anything ending in .pfa or pfb to the font database.  A few things
++# borrowed from paperconfig, (C) 1996, Yves Arrouye
++# <arrouye@debian.org>
++
++# note that this creates the "minimal" font database accepted by t1lib,
++# and doesn't look in every possible place for fonts.  It is mostly
++# provided so that xglyph will work out of the box...
++
++# Written by David Huggins-Daines <dhd@debian.org>
++
++usage() {
++    if [ "$1" = -h ]
++    then
++	exec 1>&2
++	echo -n U
++    else
++	echo -n u
++    fi
++
++    echo "sage: `basename $0` [ -v, --version ] [ -h, --help ] [ --force ]"
++    echo "                   [ fontdirs... ]"
++
++    if [ "$1" = -h ]
++    then
++	cat <<EOF
++
++Options: -v, --verbose          print version information and exit
++         -h, --help             print this help and exit
++         --force                force configuration
++EOF
++	exit 0
++    else
++	exit 1
++    fi
++}
++
++version=0.2
++topfontdirs="/usr/share/fonts/type1 /usr/share/fonts/X11"
++for dir in $topfontdirs; do
++   if [ -d $dir ]; then
++       subdirs=$(find $dir -type d -printf "%p ")
++       fontdirs="$subdirs $fontdirs"
++   fi
++done
++conffile=/etc/t1lib/t1lib.config
++confdir=/etc/t1lib/
++dbase=/etc/t1lib/FontDatabase
++temp=/etc/t1lib/FontDatabase.tmp
++
++force=0
++
++while [ $# -ne 0 ]
++do
++    case "$1" in
++	-v|--version)
++	    echo "`basename $0` version $version" \
++		"by David Huggins-Daines <dhd@debian.org>"
++	    exit 0
++	    ;;
++	-h|--help)
++	    usage -h
++	    ;;
++	--force)
++	    force=1
++	    ;;
++	*)
++	    # hairy way to remove a trailing backslash (should use perl)
++	    pat=`expr $1 : "\(.*\)\/\$" || echo $1`
++	    # hairier way to find a string anywhere in another string
++	    # should really use perl.
++	    if ! grep $pat <<EOF >/dev/null 2>&1
++$fontdirs
++EOF
++	    then
++		fontdirs="$fontdirs $1"
++	    fi
++	    ;;
++    esac
++    shift
++done
++
++# We presume that if the database exists, then so does the
++# configuration file.  Hopefully this won't break anything.
++
++if [ $force -eq 1 ] || [ ! -e $dbase ]; then
++    fontpath=""
++    afmpath=""
++
++    mkdir -p $confdir || true
++
++    echo -n "Searching for Type 1 fonts and AFM files..."
++
++    for i in $fontdirs
++    do
++	if [ -d $i ] && ls $i/*.pf[ab] > /dev/null 2>&1; then
++	    if [ -n "$fontpath" ]; then
++		fontpath="$fontpath:$i"
++	    else
++		fontpath="$i"
++	    fi
++	    
++	    if ls $i/*.afm > /dev/null 2>&1; then
++		if [ -n "$afmpath" ]; then
++		    afmpath="$afmpath:$i"
++		else
++		    afmpath="$i"
++		fi
++	    fi
++	    # get a listing of all the fonts in each dir
++	    find $i -maxdepth 1 -name *.pf[ab] -printf '%f\n' >> $temp
++	fi
++    done
++    if [ -z "$fontpath" ]; then
++	cat <<EOF
++
++No Type 1 fonts were found in the expected locations.
++If you want t1lib to be aware of your fonts, you should run
++/usr/sbin/t1libconfig with the names of your local font directories as
++arguments, or you should edit the /etc/t1lib/FontDatabase file manually.
++See the FontDatabase(5) manual page for more information.
++
++Press [return] to continue.
++EOF
++        read foo || true
++	rm -f $temp
++    else
++        echo "done."
++        echo -n "Building font database..."
++        fontcount=`wc -l $temp || true`
++        echo $fontcount > $dbase
++        cat $temp >> $dbase
++        rm -f $temp
++        echo "done."
++    fi
++
++    # now set the paths in the config file
++    cat <<EOF >$conffile
++t1lib.config - global configuration file for t1lib.
++It was created automatically on `date`
++by the t1libconfig script.
++
++Run /usr/sbin/t1libconfig --force to rebuild it.
++    
++ENCODING=.
++AFM=$afmpath
++TYPE1=$fontpath
++FONTDATABASE=$dbase
++EOF
++else
++    echo "Configuration and font database files already exist."
++    echo "Run /usr/sbin/t1libconfig --force to rebuild them."
++fi
++
++exit 0
+--- t1lib-5.1.2.orig/debian/t1lib-bin.postinst
++++ t1lib-5.1.2/debian/t1lib-bin.postinst
+@@ -0,0 +1,8 @@
++#!/bin/sh
++set -e
++
++if [ ! -f /etc/t1lib/t1lib.config ]; then
++    /usr/sbin/t1libconfig
++fi
++
++#DEBHELPER#
+--- t1lib-5.1.2.orig/debian/t1lib-bin.menu
++++ t1lib-5.1.2/debian/t1lib-bin.menu
+@@ -0,0 +1,2 @@
++?package(t1lib-bin): needs="X11" section="Applications/Viewers" \
++  title="XGlyph" command="/usr/bin/xglyph"
+--- t1lib-5.1.2.orig/debian/t1lib-bin.install
++++ t1lib-5.1.2/debian/t1lib-bin.install
+@@ -0,0 +1,2 @@
++debian/t1libconfig usr/sbin
++debian/tmp/usr/bin/*
+--- t1lib-5.1.2.orig/debian/copyright
++++ t1lib-5.1.2/debian/copyright
+@@ -0,0 +1,94 @@
++This package was debianized by David Huggins-Daines <dhd@debian.org> on
++Fri, 19 Jun 1998 20:01:01 -0400.  It has been also maintained by Artur 
++R. Czechowski <arturcz@hell.pl> and Torsten Werner <twerner@debian.org>.
++
++It was downloaded from ftp://sunsite.unc.edu/pub/Linux/libs/graphics/
++
++Upstream Author:
++
++    Rainer Menzner <Rainer.Menzner@web.de>
++
++Copyright:
++
++    Copyright (C) 1996-2003 Rainer Menzner
++
++License:
++
++    This package is free software; you can redistribute it and/or
++    modify it under the terms of the GNU Lesser General Public
++    License as published by the Free Software Foundation; either
++    version 2 of the License, or (at your option) any later version.
++
++    This package is distributed in the hope that it will be useful,
++    but WITHOUT ANY WARRANTY; without even the implied warranty of
++    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++    Lesser General Public License for more details.
++
++    You should have received a copy of the GNU Lesser General Public
++    License along with this package; if not, write to the Free Software
++    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
++
++On Debian systems, the complete text of the GNU Lesser General
++Public License can be found in `/usr/share/common-licenses/LGPL'.
++
++The Debian packaging is (C) 2008, Ruben Molina <rmolina@udea.edu.co> and
++is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
++
++Please note that there are parts of t1lib that are subject to other licenses:
++- The parseAFM-package is copyrighted by Adobe Systems Inc.
++- The type1 rasterizer is copyrighted by IBM and the X11-consortium.
++
++(from lib/t1lib/parseAFM.c)
++/*
++ * (C) 1988, 1989, 1990 by Adobe Systems Incorporated. All rights reserved.
++ *
++ * This file may be freely copied and redistributed as long as:
++ *   1) This entire notice continues to be included in the file, 
++ *   2) If the file has been modified in any way, a notice of such
++ *      modification is conspicuously indicated.
++ *
++ * PostScript, Display PostScript, and Adobe are registered trademarks of
++ * Adobe Systems Incorporated.
++ * 
++ * ************************************************************************
++ * THE INFORMATION BELOW IS FURNISHED AS IS, IS SUBJECT TO CHANGE WITHOUT
++ * NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ADOBE SYSTEMS
++ * INCORPORATED. ADOBE SYSTEMS INCORPORATED ASSUMES NO RESPONSIBILITY OR 
++ * LIABILITY FOR ANY ERRORS OR INACCURACIES, MAKES NO WARRANTY OF ANY 
++ * KIND (EXPRESS, IMPLIED OR STATUTORY) WITH RESPECT TO THIS INFORMATION, 
++ * AND EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES OF MERCHANTABILITY, 
++ * FITNESS FOR PARTICULAR PURPOSES AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ * ************************************************************************
++ */
++
++(from lib/type1/type1.c)
++/* $XConsortium: type1.c,v 1.5 91/10/10 11:20:06 rws Exp $ */
++/* Copyright International Business Machines, Corp. 1991
++ * All Rights Reserved
++ * Copyright Lexmark International, Inc. 1991
++ * All Rights Reserved
++ * Portions Copyright (c) 1990 Adobe Systems Incorporated.
++ * All Rights Reserved
++ *
++ * License to use, copy, modify, and distribute this software and its
++ * documentation for any purpose and without fee is hereby granted,
++ * provided that the above copyright notice appear in all copies and that
++ * both that copyright notice and this permission notice appear in
++ * supporting documentation, and that the name of IBM or Lexmark or Adobe
++ * not be used in advertising or publicity pertaining to distribution of
++ * the software without specific, written prior permission.
++ *
++ * IBM, LEXMARK, AND ADOBE PROVIDE THIS SOFTWARE "AS IS", WITHOUT ANY
++ * WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
++ * LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
++ * PARTICULAR PURPOSE, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.  THE
++ * ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE, INCLUDING
++ * ANY DUTY TO SUPPORT OR MAINTAIN, BELONGS TO THE LICENSEE.  SHOULD ANY
++ * PORTION OF THE SOFTWARE PROVE DEFECTIVE, THE LICENSEE (NOT IBM,
++ * LEXMARK, OR ADOBE) ASSUMES THE ENTIRE COST OF ALL SERVICING, REPAIR AND
++ * CORRECTION.  IN NO EVENT SHALL IBM, LEXMARK, OR ADOBE BE LIABLE FOR ANY
++ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
++ * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
++ * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
+--- t1lib-5.1.2.orig/debian/NEWS
++++ t1lib-5.1.2/debian/NEWS
+@@ -0,0 +1,9 @@
++t1lib (5.0.0-3) unstable; urgency=low
++
++  This version of t1lib package is binary incompatible with the previous
++  one in Debian. Details about changes are documented in following files
++  in /usr/share/doc/libt1-dev directory:
++   - changelog.gz
++   - README.t1lib-5.0.0.gz
++
++ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Jan 2004 00:02:29 +0100
+--- t1lib-5.1.2.orig/debian/t1lib-bin.manpages
++++ t1lib-5.1.2/debian/t1lib-bin.manpages
+@@ -0,0 +1,4 @@
++debian/man/FontDatabase.5
++debian/man/t1libconfig.8
++debian/man/type1afm.1
++debian/man/xglyph.1
+--- t1lib-5.1.2.orig/debian/rules
++++ t1lib-5.1.2/debian/rules
+@@ -0,0 +1,22 @@
++#!/usr/bin/make -f
++
++include /usr/share/cdbs/1/rules/debhelper.mk
++include /usr/share/cdbs/1/class/autotools.mk
++include /usr/share/cdbs/1/rules/patchsys-quilt.mk
++
++export LDFLAGS := -Wl,--as-needed
++
++DEB_MAKE_BUILD_TARGET   := without_doc
++DEB_MAKE_INSTALL_TARGET := install prefix=$(CURDIR)/debian/tmp/usr
++DEB_INSTALL_DOCS_ALL    += debian/README.Debian
++
++binary-post-install/libt1-5 ::
++	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
++binary-post-install/libt1-5-dbg ::
++	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
++binary-post-install/libt1-dev ::
++	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
++binary-post-install/libt1-doc ::
++	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
++binary-post-install/t1lib-bin ::
++	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
+--- t1lib-5.1.2.orig/debian/libt1-5.symbols
++++ t1lib-5.1.2/debian/libt1-5.symbols
+@@ -0,0 +1,381 @@
++libt1.so.5 libt1-5 #MINVER#
++ BezierTerminationTest@Base 5.1.0
++ CRASTERCompressionType@Base 5.1.0
++ CacheBLimit@Base 5.1.0
++ CachedChars@Base 5.1.0
++ CachedFonts@Base 5.1.0
++ ConicDebug@Base 5.1.0
++ Continuity@Base 5.1.0
++ CurFontEnv@Base 5.1.0
++ CurFontName@Base 5.1.0
++ DLadd@Base 5.1.0
++ DLdiv@Base 5.1.0
++ DLmult@Base 5.1.0
++ DLsub@Base 5.1.0
++ DeviceSpecifics@Base 5.1.0
++ FPXYboth@Base 5.1.0
++ FPXonly@Base 5.1.0
++ FPYonly@Base 5.1.0
++ FPdiv@Base 5.1.0
++ FPmult@Base 5.1.0
++ FPstarslash@Base 5.1.0
++ FXYConvert@Base 5.1.0
++ FXYboth@Base 5.1.0
++ FXonly@Base 5.1.0
++ FYonly@Base 5.1.0
++ FontBase@Base 5.1.0
++ FontDebug@Base 5.1.0
++ ForceAFMBBox@Base 5.1.0
++ ForceFloat@Base 5.1.0
++ FreeAFMData@Base 5.1.0
++ GetType1CharString@Base 5.1.0
++ HighHex@Base 5.1.0
++ HintDebug@Base 5.1.0
++ IXYConvert@Base 5.1.0
++ IXYboth@Base 5.1.0
++ IXonly@Base 5.1.0
++ IYonly@Base 5.1.0
++ ImageDebug@Base 5.1.0
++ InDotSection@Base 5.1.0
++ Init_BuiltInEncoding@Base 5.1.0
++ InternalTrace@Base 5.1.0
++ LineDebug@Base 5.1.0
++ LineIOTrace@Base 5.1.0
++ LowHex@Base 5.1.0
++ MemoryDebug@Base 5.1.0
++ MustCheckArgs@Base 5.1.0
++ MustCrash@Base 5.1.0
++ MustTraceCalls@Base 5.1.0
++ OffPageDebug@Base 5.1.0
++ PathDebug@Base 5.1.0
++ ProcessHints@Base 5.1.0
++ QueryFontLib@Base 5.1.0
++ RegionDebug@Base 5.1.0
++ SaveFontPaths@Base 5.1.0
++ SearchDictName@Base 5.1.0
++ SetFuncRequestID@Base 5.1.0
++ SpaceDebug@Base 5.1.0
++ StdEncArrayP@Base 5.1.0
++ StrokeDebug@Base 5.1.0
++ T1Close@Base 5.1.0
++ T1GetDecrypt@Base 5.1.0
++ T1GetFileSize@Base 5.1.0
++ T1GetTrailer@Base 5.1.0
++ T1Getc@Base 5.1.0
++ T1Gets@Base 5.1.0
++ T1Open@Base 5.1.0
++ T1Read@Base 5.1.0
++ T1Ungetc@Base 5.1.0
++ T1_AAFillOutline@Base 5.1.0
++ T1_AAGetBitsPerPixel@Base 5.1.0
++ T1_AAGetGrayValues@Base 5.1.0
++ T1_AAGetLevel@Base 5.1.0
++ T1_AAHGetGrayValues@Base 5.1.0
++ T1_AAHSetGrayValues@Base 5.1.0
++ T1_AANGetGrayValues@Base 5.1.0
++ T1_AANSetGrayValues@Base 5.1.0
++ T1_AASetBitsPerPixel@Base 5.1.0
++ T1_AASetChar@Base 5.1.0
++ T1_AASetGrayValues@Base 5.1.0
++ T1_AASetLevel@Base 5.1.0
++ T1_AASetRect@Base 5.1.0
++ T1_AASetSmartLimits@Base 5.1.0
++ T1_AASetSmartMode@Base 5.1.0
++ T1_AASetString@Base 5.1.0
++ T1_AFM_ptr@Base 5.1.0
++ T1_AbsolutePath@Base 5.1.0
++ T1_AddFont@Base 5.1.0
++ T1_AddFontDataBase@Base 5.1.0
++ T1_AddFontDataBaseXLFD@Base 5.1.0
++ T1_AddToFileSearchPath@Base 5.1.0
++ T1_CheckEndian@Base 5.1.0
++ T1_CheckForFontID@Base 5.1.0
++ T1_CheckForInit@Base 5.1.0
++ T1_ClearStrokeFlag@Base 5.1.0
++ T1_CloseLib@Base 5.1.0
++ T1_ConcatGlyphs@Base 5.1.0
++ T1_ConcatOutlines@Base 5.1.0
++ T1_CopyFont@Base 5.1.0
++ T1_CopyGlyph@Base 5.1.0
++ T1_CopyOutline@Base 5.1.0
++ T1_DeleteAllSizes@Base 5.1.0
++ T1_DeleteEncoding@Base 5.1.0
++ T1_DeleteFont@Base 5.1.0
++ T1_DeleteSize@Base 5.1.0
++ T1_DumpGlyph@Base 5.1.0
++ T1_DumpPath@Base 5.1.0
++ T1_ENC_ptr@Base 5.1.0
++ T1_ExtendFont@Base 5.1.0
++ T1_ExtendHMatrix@Base 5.1.0
++ T1_ExtendVMatrix@Base 5.1.0
++ T1_FDBXLFD_ptr@Base 5.1.0
++ T1_FDB_ptr@Base 5.1.0
++ T1_FillOutline@Base 5.1.0
++ T1_FreeCompCharData@Base 5.1.0
++ T1_FreeGlyph@Base 5.1.0
++ T1_FreeOutline@Base 5.1.0
++ T1_GenerateAFMFallbackInfo@Base 5.1.0
++ T1_GetAfmFileName@Base 5.1.0
++ T1_GetAfmFilePath@Base 5.1.0
++ T1_GetAllCharNames@Base 5.1.0
++ T1_GetBitmapPad@Base 5.1.0
++ T1_GetCharBBox@Base 5.1.0
++ T1_GetCharName@Base 5.1.0
++ T1_GetCharOutline@Base 5.1.0
++ T1_GetCharString@Base 5.1.0
++ T1_GetCharWidth@Base 5.1.0
++ T1_GetCompCharData@Base 5.1.0
++ T1_GetCompCharDataByIndex@Base 5.1.0
++ T1_GetEncodingIndex@Base 5.1.0
++ T1_GetEncodingIndices@Base 5.1.0
++ T1_GetEncodingScheme@Base 5.1.0
++ T1_GetExtend@Base 5.1.0
++ T1_GetFamilyName@Base 5.1.0
++ T1_GetFileSearchPath@Base 5.1.0
++ T1_GetFontBBox@Base 5.1.0
++ T1_GetFontFileName@Base 5.1.0
++ T1_GetFontFilePath@Base 5.1.0
++ T1_GetFontName@Base 5.1.0
++ T1_GetFullName@Base 5.1.0
++ T1_GetIsFixedPitch@Base 5.1.0
++ T1_GetItalicAngle@Base 5.1.0
++ T1_GetKerning@Base 5.1.0
++ T1_GetLibIdent@Base 5.1.0
++ T1_GetLinePosition@Base 5.1.0
++ T1_GetLineThickness@Base 5.1.0
++ T1_GetMetricsInfo@Base 5.1.0
++ T1_GetMoveOutline@Base 5.1.0
++ T1_GetNoCompositeChars@Base 5.1.0
++ T1_GetNoFonts@Base 5.1.0
++ T1_GetNoKernPairs@Base 5.1.0
++ T1_GetNotice@Base 5.1.0
++ T1_GetSlant@Base 5.1.0
++ T1_GetStringBBox@Base 5.1.0
++ T1_GetStringOutline@Base 5.1.0
++ T1_GetStringWidth@Base 5.1.0
++ T1_GetStrokeMode@Base 5.1.0
++ T1_GetStrokeWidth@Base 5.1.0
++ T1_GetTransform@Base 5.1.0
++ T1_GetUnderlinePosition@Base 5.1.0
++ T1_GetUnderlineThickness@Base 5.1.0
++ T1_GetVersion@Base 5.1.0
++ T1_GetWeight@Base 5.1.0
++ T1_GetlenIV@Base 5.1.0
++ T1_INFINITY@Base 5.1.0
++ T1_InitLib@Base 5.1.0
++ T1_IsInternalChar@Base 5.1.0
++ T1_LoadEncoding@Base 5.1.0
++ T1_LoadFont@Base 5.1.0
++ T1_ManipulatePath@Base 5.1.0
++ T1_MirrorHMatrix@Base 5.1.0
++ T1_MirrorVMatrix@Base 5.1.0
++ T1_PFAB_ptr@Base 5.1.0
++ T1_PrintLog@Base 5.1.0
++ T1_QueryCompositeChar@Base 5.1.0
++ T1_QueryLigs@Base 5.1.0
++ T1_QueryX11Support@Base 5.1.0
++ T1_ReencodeFont@Base 5.1.0
++ T1_RelativePath@Base 5.1.0
++ T1_RotateMatrix@Base 5.1.0
++ T1_ScaleOutline@Base 5.1.0
++ T1_SetAfmFileName@Base 5.1.0
++ T1_SetBitmapPad@Base 5.1.0
++ T1_SetChar@Base 5.1.0
++ T1_SetDefaultEncoding@Base 5.1.0
++ T1_SetDeviceResolutions@Base 5.1.0
++ T1_SetFileSearchPath@Base 5.1.0
++ T1_SetFontDataBase@Base 5.1.0
++ T1_SetFontDataBaseXLFD@Base 5.1.0
++ T1_SetLinePosition@Base 5.1.0
++ T1_SetLineThickness@Base 5.1.0
++ T1_SetLogLevel@Base 5.1.0
++ T1_SetRasterFlags@Base 5.1.0
++ T1_SetRect@Base 5.1.0
++ T1_SetString@Base 5.1.0
++ T1_SetStrokeFlag@Base 5.1.0
++ T1_SetStrokeWidth@Base 5.1.0
++ T1_ShearHMatrix@Base 5.1.0
++ T1_ShearVMatrix@Base 5.1.0
++ T1_SlantFont@Base 5.1.0
++ T1_StrError@Base 5.1.0
++ T1_StrokeFont@Base 5.1.0
++ T1_SubsetFont@Base 5.1.0
++ T1_TransformFont@Base 5.1.0
++ T1_TransformMatrix@Base 5.1.0
++ T1_Type1OperatorFlags@Base 5.1.0
++ T1_Up@Base 5.1.0
++ T1_WriteAFMFallbackFile@Base 5.1.0
++ T1_errno@Base 5.1.0
++ T1_fdb@Base 5.1.0
++ T1_fdbxlfd@Base 5.1.0
++ T1aa_SmartOn@Base 5.1.0
++ T1aa_bg@Base 5.1.0
++ T1aa_bpp@Base 5.1.0
++ T1aa_smartlimit1@Base 5.1.0
++ T1aa_smartlimit2@Base 5.1.0
++ T1eexec@Base 5.1.0
++ T1int_CreateNewFontSize@Base 5.1.0
++ T1int_GetLastFontSize@Base 5.1.0
++ T1int_QueryFontSize@Base 5.1.0
++ T1int_QuerySEAC@Base 5.1.0
++ T1int_Type1QuerySEAC@Base 5.1.0
++ T1io_reset@Base 5.1.0
++ T1lib_parseFile@Base 5.1.0
++ TheCurrentFont@Base 5.1.0
++ Type1Char@Base 5.1.0
++ Type1Line@Base 5.1.0
++ currstartstem@Base 5.1.0
++ digit_value@Base 5.1.0
++ err_warn_msg_buf@Base 5.1.0
++ errornumber@Base 5.1.0
++ filestats@Base 5.1.0
++ fill@Base 5.1.0
++ fillrun@Base 5.1.0
++ fontfcnA@Base 5.1.0
++ fontfcnB@Base 5.1.0
++ fontfcnB_ByName@Base 5.1.0
++ fontfcnB_string@Base 5.1.0
++ fontfcnRect@Base 5.1.0
++ initFont@Base 5.1.0
++ intT1_Env_GetCompletePath@Base 5.1.0
++ intT1_FreeSearchPaths@Base 5.1.0
++ intT1_ScanConfigFile@Base 5.1.0
++ intT1_SetupDefaultSearchPaths@Base 5.1.0
++ intT1_scanFontDBase@Base 5.1.0
++ intT1_scanFontDBaseXLFD@Base 5.1.0
++ linebuf@Base 5.1.0
++ not_def@Base 5.1.0
++ numalignmentzones@Base 5.1.0
++ numstems@Base 5.1.0
++ objFormatArray@Base 5.1.0
++ objFormatBoolean@Base 5.1.0
++ objFormatEncoding@Base 5.1.0
++ objFormatFile@Base 5.1.0
++ objFormatInteger@Base 5.1.0
++ objFormatName@Base 5.1.0
++ objFormatReal@Base 5.1.0
++ objFormatString@Base 5.1.0
++ oldhor@Base 5.1.0
++ oldhorhalf@Base 5.1.0
++ oldvert@Base 5.1.0
++ oldverthalf@Base 5.1.0
++ pFontBase@Base 5.1.0
++ readFont@Base 5.1.0
++ reportusage@Base 5.1.0
++ resetFont@Base 5.1.0
++ scan_font@Base 5.1.0
++ scan_token@Base 5.1.0
++ stck_state@Base 5.1.0
++ stems@Base 5.1.0
++ swathrightmost@Base 5.1.0
++ swathxsort@Base 5.1.0
++ t1_Allocate@Base 5.1.0
++ t1_ApplyContinuity@Base 5.1.0
++ t1_ArgErr@Base 5.1.0
++ t1_Bezier@Base 5.1.0
++ t1_BoundingBox@Base 5.1.0
++ t1_BoxClip@Base 5.1.0
++ t1_BoxPath@Base 5.1.0
++ t1_Bresenham@Base 5.1.0
++ t1_ChangeDirection@Base 5.1.0
++ t1_CloseHints@Base 5.1.0
++ t1_ClosePath@Base 5.1.0
++ t1_Consume@Base 5.1.0
++ t1_Copy@Base 5.1.0
++ t1_CopyPath@Base 5.1.0
++ t1_CopyRegion@Base 5.1.0
++ t1_CopySpace@Base 5.1.0
++ t1_Destroy@Base 5.1.0
++ t1_DropSegment@Base 5.1.0
++ t1_DumpArea@Base 5.1.0
++ t1_DumpEdges@Base 5.1.0
++ t1_DumpSpace@Base 5.1.0
++ t1_DumpText@Base 5.1.0
++ t1_Dup@Base 5.1.0
++ t1_EmptyRegion@Base 5.1.0
++ t1_ErrorMsg@Base 5.1.0
++ t1_FormatFP@Base 5.1.0
++ t1_Free@Base 5.1.0
++ t1_HeadSegment@Base 5.1.0
++ t1_Hint@Base 5.1.0
++ t1_ILoc@Base 5.1.0
++ t1_Identity@Base 5.1.0
++ t1_InitHints@Base 5.1.0
++ t1_InitImager@Base 5.1.0
++ t1_InitSpaces@Base 5.1.0
++ t1_Interior@Base 5.1.0
++ t1_Join@Base 5.1.0
++ t1_JoinSegment@Base 5.1.0
++ t1_KillPath@Base 5.1.0
++ t1_KillRegion@Base 5.1.0
++ t1_Line@Base 5.1.0
++ t1_Loc@Base 5.1.0
++ t1_MInvert@Base 5.1.0
++ t1_MMultiply@Base 5.1.0
++ t1_MoreWorkArea@Base 5.1.0
++ t1_MoveEdges@Base 5.1.0
++ t1_PathDelta@Base 5.1.0
++ t1_PathSegment@Base 5.1.0
++ t1_PathXform@Base 5.1.0
++ t1_Permanent@Base 5.1.0
++ t1_Phantom@Base 5.1.0
++ t1_Pragmatics@Base 5.1.0
++ t1_ProcessHint@Base 5.1.0
++ t1_PseudoSpace@Base 5.1.0
++ t1_QueryBounds@Base 5.1.0
++ t1_QueryLoc@Base 5.1.0
++ t1_QueryPath@Base 5.1.0
++ t1_QuerySpace@Base 5.1.0
++ t1_RegionBounds@Base 5.1.0
++ t1_Reverse@Base 5.1.0
++ t1_ReverseSubPaths@Base 5.1.0
++ t1_Scale@Base 5.1.0
++ t1_Snap@Base 5.1.0
++ t1_SortSwath@Base 5.1.0
++ t1_StepBezier@Base 5.1.0
++ t1_StepLine@Base 5.1.0
++ t1_SubLoc@Base 5.1.0
++ t1_SwathUnion@Base 5.1.0
++ t1_TermImager@Base 5.1.0
++ t1_Transform@Base 5.1.0
++ t1_TypeErr@Base 5.1.0
++ t1_UnConvert@Base 5.1.0
++ t1_UnJumble@Base 5.1.0
++ t1_Unique@Base 5.1.0
++ t1_User@Base 5.1.0
++ t1_Xform@Base 5.1.0
++ t1_abort@Base 5.1.0
++ t1_get_abort_message@Base 5.1.0
++ t1lib_log_file@Base 5.1.0
++ t1lib_log_level@Base 5.1.0
++ tokenLength@Base 5.1.0
++ tokenMaxP@Base 5.1.0
++ tokenStartP@Base 5.1.0
++ tokenTooLong@Base 5.1.0
++ tokenType@Base 5.1.0
++ tokenValue@Base 5.1.0
++ vm_alloc@Base 5.1.0
++ vm_base@Base 5.1.0
++ vm_free@Base 5.1.0
++ vm_init@Base 5.1.0
++ vm_init_amount@Base 5.1.0
++ vm_init_count@Base 5.1.0
++ vm_next@Base 5.1.0
++ vm_size@Base 5.1.0
++ vm_used@Base 5.1.0
++ wsoffsetX@Base 5.1.0
++ wsoffsetY@Base 5.1.0
++ wsset@Base 5.1.0
++ xiStub@Base 5.1.0
++ xiTemporary@Base 5.1.0
++libt1x.so.5 libt1-5 #MINVER#
++ T1_AASetCharX@Base 5.1.1
++ T1_AASetRectX@Base 5.1.1
++ T1_AASetStringX@Base 5.1.1
++ T1_ComputeAAColorsX@Base 5.1.1
++ T1_LogicalPositionX@Base 5.1.1
++ T1_SetCharX@Base 5.1.1
++ T1_SetRectX@Base 5.1.1
++ T1_SetStringX@Base 5.1.1
++ T1_SetX11Params@Base 5.1.1
++ T1_XImageFromGlyph@Base 5.1.1
+--- t1lib-5.1.2.orig/debian/control
++++ t1lib-5.1.2/debian/control
+@@ -0,0 +1,84 @@
++Source: t1lib
++Section: libs
++Priority: optional
++Maintainer: Ruben Molina <rmolina@udea.edu.co>
++Build-Depends: cdbs, debhelper (>= 7), autotools-dev, libice-dev, libsm-dev, libx11-dev, libxext-dev, libxaw7-dev, quilt
++Standards-Version: 3.8.0
++Homepage: ftp://sunsite.unc.edu/pub/Linux/libs/graphics/
++
++Package: libt1-5
++Section: libs
++Architecture: any
++Depends: ${shlibs:Depends}, ${misc:Depends}
++Description: Type 1 font rasterizer library - runtime
++ T1lib is an enhanced rasterizer for Type 1 fonts.
++ .
++ T1lib is based on the X11R5 font rasterizer code, but operates independently
++ of X11.  It includes many enhancements, including underlining, antialiasing,
++ user-defined slant and extension factors, and rotation.
++ .
++ This package contains the shared libraries needed to run programs using T1lib.
++
++Package: libt1-dev
++Section: libdevel
++Architecture: any
++Depends: libt1-5 (= ${binary:Version}), libice-dev, libsm-dev, libx11-dev,
++ libxext-dev, libxaw7-dev
++Recommends: libt1-doc
++Conflicts: t1lib-dev, t1lib1-dev
++Description: Type 1 font rasterizer library - development
++ T1lib is an enhanced rasterizer for Type 1 fonts.
++ .
++ T1lib is based on the X11R5 font rasterizer code, but operates independently
++ of X11.  It includes many enhancements, including underlining, antialiasing,
++ user-defined slant and extension factors, and rotation.
++ .
++ This package contains the header files and static libraries needed to
++ develop programs using T1lib.
++ .
++ Please note, that PDF documentation is placed in libt1-doc
++
++Package: t1lib-bin
++Architecture: any
++Section: misc
++Depends: ${shlibs:Depends}
++Provides: t1lib1-bin
++Replaces: t1lib1-bin
++Conflicts: t1lib1-bin
++Description: Type 1 font rasterizer library - user binaries
++ T1lib is an enhanced rasterizer for Type 1 fonts.
++ .
++ T1lib is based on the X11R5 font rasterizer code, but operates independently
++ of X11.  It includes many enhancements, including underlining, antialiasing,
++ user-defined slant and extension factors, and rotation.
++ .
++ This package contains the programs "xglyph" and "type1afm", included in the
++ upstream T1lib distribution.  It also contains the "t1libconfig"
++ script used to configure t1lib.
++
++Package: libt1-doc
++Architecture: all
++Section: doc
++Description: Type 1 font rasterizer library - developers documentation
++ T1lib is an enhanced rasterizer for Type 1 fonts.
++ .
++ T1lib is based on the X11R5 font rasterizer code, but operates independently
++ of X11.  It includes many enhancements, including underlining, antialiasing,
++ user-defined slant and extension factors, and rotation.
++ .
++ This package contains developers documentation.
++
++Package: libt1-5-dbg
++Section: libdevel
++Priority: extra
++Architecture: any
++Depends: libt1-5 (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
++Description: Type 1 font rasterizer library - debugging runtime
++ T1lib is an enhanced rasterizer for Type 1 fonts.
++ .
++ T1lib is based on the X11R5 font rasterizer code, but operates independently
++ of X11.  It includes many enhancements, including underlining, antialiasing,
++ user-defined slant and extension factors, and rotation.
++ .
++ This package contains debugging information.
++
+--- t1lib-5.1.2.orig/debian/libt1-dev.install
++++ t1lib-5.1.2/debian/libt1-dev.install
+@@ -0,0 +1,3 @@
++debian/tmp/usr/include/*
++debian/tmp/usr/lib/*.so
++debian/tmp/usr/lib/*.a
+--- t1lib-5.1.2.orig/debian/compat
++++ t1lib-5.1.2/debian/compat
+@@ -0,0 +1 @@
++7
+--- t1lib-5.1.2.orig/debian/t1lib-bin.postrm
++++ t1lib-5.1.2/debian/t1lib-bin.postrm
+@@ -0,0 +1,8 @@
++#!/bin/sh
++set -e
++
++if [ "$1" = "purge" ]; then
++	rm -rf /etc/t1lib
++fi
++
++#DEBHELPER#
+--- t1lib-5.1.2.orig/debian/watch
++++ t1lib-5.1.2/debian/watch
+@@ -0,0 +1,3 @@
++version=3
++ftp://sunsite.unc.edu/pub/Linux/libs/graphics/t1lib-(.*)\.tar\.gz \
++  debian debian/orig-tar.sh
+--- t1lib-5.1.2.orig/debian/README.Debian
++++ t1lib-5.1.2/debian/README.Debian
+@@ -0,0 +1,25 @@
++t1lib for Debian
++----------------
++
++This package has been created from scratch using debhelper. It contains
++four binary packages:
++ * shared library - libt1-5
++ * development files - libt1-5-dev
++ * font-related binary utils - t1lib5-bin
++ * documentation - libt1-5-doc
++
++However you can read in upstream's README that t1lib is completely independent
++of X11, you should know that package provides also libt1x library which
++contains X11 pixmap support. That's why it requires a bunch of X-libraries
++installed. If you consider this as a bad behavior, please discuss it on
++debian-devel list.
++
++NOTE: The old 't1lib0' package will *remove* /etc/t1lib/ and its
++contents if you purge it. Since this package is now obsolete, there
++is no good solution for this; you must back up your font database and
++config file if you wish to preserve them. Sorry...
++
++This package has been previously maintained by David Huggins-Daines, great
++thanks to him for his good job.
++
++ -- Artur R. Czechowski <arturcz@hell.pl>, Tue, 11 Nov 2003 13:31:48 +0100
+--- t1lib-5.1.2.orig/debian/t1lib-bin.dirs
++++ t1lib-5.1.2/debian/t1lib-bin.dirs
+@@ -0,0 +1 @@
++etc/t1lib
+--- t1lib-5.1.2.orig/debian/patches/no-docs.diff
++++ t1lib-5.1.2/debian/patches/no-docs.diff
+@@ -0,0 +1,34 @@
++We are using debhelper to install the documentation in the correct
++directory.
++
++Index: t1lib-5.1.1/doc/Makefile.in
++===================================================================
++--- t1lib-5.1.1.orig/doc/Makefile.in	2008-01-05 19:05:03.000000000 +0100
+++++ t1lib-5.1.1/doc/Makefile.in	2008-01-05 19:05:25.000000000 +0100
++@@ -89,16 +89,16 @@
++ 
++ 
++ install: dummy
++-	if (test -f t1lib_doc.ps) \
++-	then \
++-	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
++-	  $(INSTALL_DATA) t1lib_doc.ps $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
++-	fi;
++-	if (test -f t1lib_doc.pdf) \
++-	then \
++-	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
++-	  $(INSTALL_DATA) t1lib_doc.pdf $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
++-	fi;
+++#	if (test -f t1lib_doc.ps) \
+++#	then \
+++#	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
+++#	  $(INSTALL_DATA) t1lib_doc.ps $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
+++#	fi;
+++#	if (test -f t1lib_doc.pdf) \
+++#	then \
+++#	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
+++#	  $(INSTALL_DATA) t1lib_doc.pdf $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
+++#	fi;
++ 
++ 
++ uninstall: dummy
+--- t1lib-5.1.2.orig/debian/patches/lib-cleanup.diff
++++ t1lib-5.1.2/debian/patches/lib-cleanup.diff
+@@ -0,0 +1,59 @@
++do not link against libraries that are not needed
++
++Index: t1lib-5.1.1/lib/Makefile.in
++===================================================================
++--- t1lib-5.1.1.orig/lib/Makefile.in	2008-01-05 19:17:21.000000000 +0100
+++++ t1lib-5.1.1/lib/Makefile.in	2008-01-05 19:17:38.000000000 +0100
++@@ -24,7 +24,7 @@
++ X_LIBS    = @X_LIBS@
++ TOPSRC    = @top_srcdir@
++ XPM_LIB   = -lXpm
++-XLIB      = @X_PRE_LIBS@ -lXext -lX11 @X_EXTRA_LIBS@
+++XLIB      = -lX11
++ LDFLAGS   = @LDFLAGS@
++ LDLIBS    = @LDLIBS@
++ AR        = ar rc
++@@ -137,7 +137,7 @@
++ 	$(LIBTOOL) --mode=link \
++ 		$(CC) $(LDFLAGS) -o $@ $(T1LIBX_OBJS) \
++ 	         -version-info @T1LIB_LT_CURRENT@:@T1LIB_LT_REVISION@:@T1LIB_LT_AGE@ \
++-	         libt1.la $(X_LIBS) $(XPM_LIB) $(XLIB)  -no-undefined -rpath $(libdir) 
+++	         libt1.la $(X_LIBS) $(XLIB)  -no-undefined -rpath $(libdir) 
++ 	cp t1lib/t1libx.h .
++ 
++ 
++Index: t1lib-5.1.1/type1afm/Makefile.in
++===================================================================
++--- t1lib-5.1.1.orig/type1afm/Makefile.in	2008-01-05 19:17:52.000000000 +0100
+++++ t1lib-5.1.1/type1afm/Makefile.in	2008-01-05 19:18:02.000000000 +0100
++@@ -70,7 +70,7 @@
++ 
++ type1afm: $(OBJS) ../lib/t1lib.h
++ 	$(LIBTOOL) --mode=link \
++-		$(CC) -o type1afm $(LDFLAGS) $(OBJS) $(T1LIB) $(LDLIBS)
+++		$(CC) -o type1afm $(LDFLAGS) $(OBJS) $(T1LIB)
++ 
++ .SUFFIXES: .lo
++ .c.lo:
++Index: t1lib-5.1.1/xglyph/Makefile.in
++===================================================================
++--- t1lib-5.1.1.orig/xglyph/Makefile.in	2008-01-05 19:18:15.000000000 +0100
+++++ t1lib-5.1.1/xglyph/Makefile.in	2008-01-05 19:18:31.000000000 +0100
++@@ -24,7 +24,7 @@
++ X_LIBS    = @X_LIBS@
++ TOPSRC    = @top_srcdir@
++ XPM_LIB   = -lXpm
++-XLIB      = @X_PRE_LIBS@ -lXext -lX11 @X_EXTRA_LIBS@
+++XLIB      = -lX11 @X_EXTRA_LIBS@
++ LDFLAGS   = @LDFLAGS@
++ LDLIBS    = @LDLIBS@ 
++ AR        = ar rc
++@@ -65,7 +65,7 @@
++ 
++ T1LIB  = ../lib/libt1.la
++ T1LIBX = ../lib/libt1x.la
++-XAWLIB = -lXaw -lXt -lXmu
+++XAWLIB = -lXaw -lXt
++ 
++ 
++ all: xglyph
+--- t1lib-5.1.2.orig/debian/patches/no-config.diff
++++ t1lib-5.1.2/debian/patches/no-config.diff
+@@ -0,0 +1,57 @@
++do not install a static configuration file
++
++Index: t1lib-5.1.1/lib/Makefile.in
++===================================================================
++--- t1lib-5.1.1.orig/lib/Makefile.in	2008-01-05 19:13:57.000000000 +0100
+++++ t1lib-5.1.1/lib/Makefile.in	2008-01-05 19:14:18.000000000 +0100
++@@ -161,17 +161,17 @@
++ install: dummy
++ 	$(MKINSTALLDIRS) $(DESTDIR)$(libdir)
++ 	$(MKINSTALLDIRS) $(DESTDIR)$(includedir)
++-	$(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@
+++#	$(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@
++ 	$(LIBTOOL) --mode=install \
++ 		$(INSTALL_DATA) $(MAIN_TARGET) $(DESTDIR)$(libdir)
++ 	$(LIBTOOL) --mode=install \
++ 		$(INSTALL_DATA) $(MAIN_HEADER) $(DESTDIR)$(includedir)
++-	if (test -f $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config) \
++-	then \
++-	  echo "Alert: Global configuration file exists, installation skipped!"; \
++-	else \
++-	  $(LIBTOOL) --mode=install $(INSTALL_DATA) t1lib.config $(DESTDIR)@T1LIB_DATA_DIR@; \
++-	fi;
+++#	if (test -f $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config) \
+++#	then \
+++#	  echo "Alert: Global configuration file exists, installation skipped!"; \
+++#	else \
+++#	  $(LIBTOOL) --mode=install $(INSTALL_DATA) t1lib.config $(DESTDIR)@T1LIB_DATA_DIR@; \
+++#	fi;
++ 
++ 
++ uninstall: dummy
++@@ -179,7 +179,7 @@
++ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(libdir)/libt1x.la
++ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(includedir)/t1lib.h
++ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(includedir)/t1libx.h
++-	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config
+++#	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config
++ 
++ 
++ dummy:
++Index: t1lib-5.1.1/xglyph/xglyph.c
++===================================================================
++--- t1lib-5.1.1.orig/xglyph/xglyph.c	2008-01-05 19:16:30.000000000 +0100
+++++ t1lib-5.1.1/xglyph/xglyph.c	2008-01-05 19:16:40.000000000 +0100
++@@ -526,9 +526,12 @@
++   
++   /* Check for environment entry. If not set, set it to current
++      directory so that configuration file is found there */
+++  /* It violates the Debian Policy */
+++#if 0
++   if (getenv("T1LIB_CONFIG")==NULL){
++     putenv( "T1LIB_CONFIG=./t1lib.config");
++   }
+++#endif
++ 
++   
++   /* Set log-level: */
+--- t1lib-5.1.2.orig/debian/patches/segfault.diff
++++ t1lib-5.1.2/debian/patches/segfault.diff
+@@ -0,0 +1,62 @@
++This patch does not look safe and it has not been accepted upstream.
++Index: t1lib-5.1.1/lib/t1lib/t1base.c
++===================================================================
++--- t1lib-5.1.1.orig/lib/t1lib/t1base.c	2005-05-18 05:08:01.000000000 +0200
+++++ t1lib-5.1.1/lib/t1lib/t1base.c	2008-01-06 20:48:32.000000000 +0100
++@@ -455,7 +455,7 @@
++ 	   to test_for_t1_file() filename is substituted by an emty
++ 	   string if the file was not found: */
++ 	sprintf( err_warn_msg_buf, "Type 1 Font file %s.[pfa/pfb] not found (FontID=%d, SearchPath=%s)",
++-		 linebuf, m-1, T1_GetFileSearchPath(T1_PFAB_PATH));
+++		 linebuf, m-1, intT1_GetFileSearchPath(T1_PFAB_PATH));
++ 	if ((test_for_t1_file( &linebuf[0]))){
++ 	  T1_PrintLog( "intT1_scanFontDBase()", err_warn_msg_buf, T1LOG_WARNING);
++ 	  located=0;
++@@ -579,7 +579,7 @@
++ 	   to test_for_t1_file() filename is substituted by an emty
++ 	   string if the file was not found: */
++ 	sprintf( err_warn_msg_buf, "Type 1 Font file %s.[pfa/pfb] not found (FontID=%d, SearchPath=%s)",
++-		 linebuf, m-1, T1_GetFileSearchPath(T1_PFAB_PATH));
+++		 linebuf, m-1, intT1_GetFileSearchPath(T1_PFAB_PATH));
++ 	if ((test_for_t1_file( &linebuf[0]))){
++ 	  T1_PrintLog( "intT1_scanFontDBase()", err_warn_msg_buf, T1LOG_WARNING);
++ 	  located=0;
++Index: t1lib-5.1.1/lib/t1lib/t1env.c
++===================================================================
++--- t1lib-5.1.1.orig/lib/t1lib/t1env.c	2008-01-06 20:48:32.000000000 +0100
+++++ t1lib-5.1.1/lib/t1lib/t1env.c	2008-01-06 20:48:32.000000000 +0100
++@@ -807,6 +807,14 @@
++ 
++ }
++ 
+++/* intT1_GetFileSearchPath(): 
+++ call T1_GetFileSearchPath and truncate the line to avoid overflowing
+++ error buffers*/ 
+++char *intT1_GetFileSearchPath( int type)
+++{
+++   char  *res = T1_GetFileSearchPath(type);
+++   res[900] = 0;
+++}
++ 
++ /* T1_AddToFileSearchPath(): Add the specified path element to
++    the specified search path. If the existing path is the default path,
++Index: t1lib-5.1.1/lib/t1lib/t1env.h
++===================================================================
++--- t1lib-5.1.1.orig/lib/t1lib/t1env.h	2005-05-16 20:37:43.000000000 +0200
+++++ t1lib-5.1.1/lib/t1lib/t1env.h	2008-01-06 20:48:32.000000000 +0100
++@@ -35,6 +35,7 @@
++ int T1_SetFileSearchPath( int type, char *pathname);
++ int T1_AddToFileSearchPath( int pathtype, int mode, char *pathname);
++ char *T1_GetFileSearchPath( int type);
+++char *intT1_GetFileSearchPath( int type);
++ int T1_SetFontDataBase( char *filename);
++ int T1_AddFontDataBase( int mode, char *filename);
++ int T1_SetFontDataBaseXLFD( char *filename);
++@@ -49,6 +50,7 @@
++ extern int T1_SetFileSearchPath( int type, char *pathname);
++ extern int T1_AddToFileSearchPath( int pathtype, int mode, char *pathname);
++ extern char *T1_GetFileSearchPath( int type);
+++extern char *intT1_GetFileSearchPath( int type);
++ extern int T1_SetFontDataBase( char *filename);
++ extern int T1_AddFontDataBase( int mode, char *filename);
++ extern int T1_SetFontDataBaseXLFD( char *filename);
+--- t1lib-5.1.2.orig/debian/patches/CVE-2010-2642.patch
++++ t1lib-5.1.2/debian/patches/CVE-2010-2642.patch
+@@ -0,0 +1,24 @@
++diff --git a/lib/t1lib/parseAFM.c b/lib/t1lib/parseAFM.c
++index 6a31d7f..ba64541 100644
++--- a/lib/t1lib/parseAFM.c
+++++ b/lib/t1lib/parseAFM.c
++@@ -199,7 +199,9 @@ static char *token(stream)
++     idx = 0;
++     
++     while (ch != EOF && ch != ' ' && ch != CR  && ch != LF &&
++-	   ch != CTRL_Z && ch != '\t' && ch != ':' && ch != ';'){
+++	   ch != CTRL_Z && ch != '\t' && ch != ':' && ch != ';'
+++     && idx < (MAX_NAME -1))
+++    {
++       ident[idx++] = ch;
++       ch = fgetc(stream);
++     } /* while */
++@@ -235,7 +237,7 @@ static char *linetoken(stream)
++     while ((ch = fgetc(stream)) == ' ' || ch == '\t' ); 
++     
++     idx = 0;
++-    while (ch != EOF && ch != CR  && ch != LF && ch != CTRL_Z) 
+++    while (ch != EOF && ch != CR  && ch != LF && ch != CTRL_Z && idx < (MAX_NAME - 1)) 
++     {
++         ident[idx++] = ch;
++         ch = fgetc(stream);
+--- t1lib-5.1.2.orig/debian/patches/CVE-2011-0764.diff
++++ t1lib-5.1.2/debian/patches/CVE-2011-0764.diff
+@@ -0,0 +1,32 @@
++Description: Don't lookup previous point if there isn't any
++Author: Marc Deslauriers <marc.deslauriers@canonical.com>
++Forwarded: no
++
++Index: t1lib-5.1.2/lib/type1/type1.c
++===================================================================
++--- t1lib-5.1.2.orig/lib/type1/type1.c	2011-12-13 14:24:14.280965637 -0600
+++++ t1lib-5.1.2/lib/type1/type1.c	2011-12-13 14:25:25.893320747 -0600
++@@ -1700,6 +1700,7 @@
++   long pindex = 0;
++   
++   /* compute hinting for previous segment! */
+++  if (ppoints == NULL) Error0i("RLineTo: No previous point!\n");
++   FindStems( currx, curry, currx-ppoints[numppoints-2].x, curry-ppoints[numppoints-2].y, dx, dy);
++ 
++   /* Allocate a new path point and pre-setup data */
++@@ -1728,6 +1729,7 @@
++   long pindex = 0;
++   
++   /* compute hinting for previous point! */
+++  if (ppoints == NULL) Error0i("RRCurveTo: No previous point!\n");
++   FindStems( currx, curry, currx-ppoints[numppoints-2].x, curry-ppoints[numppoints-2].y, dx1, dy1);
++ 
++   /* Allocate three new path points and pre-setup data */
++@@ -1903,6 +1905,7 @@
++     FindStems( currx, curry, 0, 0, dx, dy);
++   }
++   else {
+++    if (ppoints == NULL) Error0i("RMoveTo: No previous point!\n");
++     FindStems( currx, curry, ppoints[numppoints-2].x, ppoints[numppoints-2].y, dx, dy);
++   }
++   
+--- t1lib-5.1.2.orig/debian/patches/CVE-2011-1552_1553_1554.patch
++++ t1lib-5.1.2/debian/patches/CVE-2011-1552_1553_1554.patch
+@@ -0,0 +1,133 @@
++Author: Jaroslav Å karvada <jskarvad@redhat.com>
++Description: Fix more crashes on oversized fonts
++Bug-Redhat: http://bugzilla.redhat.com/show_bug.cgi?id=692909
++Index: t1lib-5.1.2/lib/type1/lines.c
++===================================================================
++--- t1lib-5.1.2.orig/lib/type1/lines.c	2007-12-23 09:49:42.000000000 -0600
+++++ t1lib-5.1.2/lib/type1/lines.c	2012-01-17 14:15:08.000000000 -0600
++@@ -67,6 +67,10 @@
++ None.
++ */
++  
+++#define  BITS         (sizeof(LONG)*8)
+++#define  HIGHTEST(p)  (((p)>>(BITS-2)) != 0)  /* includes sign bit */
+++#define  TOOBIG(xy)   ((xy < 0) ? HIGHTEST(-xy) : HIGHTEST(xy))
+++
++ /*
++ :h2.StepLine() - Produces Run Ends for a Line After Checks
++  
++@@ -84,6 +88,9 @@
++        IfTrace4((LineDebug > 0), ".....StepLine: (%d,%d) to (%d,%d)\n",
++                                             x1, y1, x2, y2);
++  
+++      if ( TOOBIG(x1) || TOOBIG(x2) || TOOBIG(y1) || TOOBIG(y2))
+++              abort("Lines this big not supported", 49);
+++
++        dy = y2 - y1;
++  
++ /*
++Index: t1lib-5.1.2/lib/type1/objects.c
++===================================================================
++--- t1lib-5.1.2.orig/lib/type1/objects.c	2007-12-23 09:49:42.000000000 -0600
+++++ t1lib-5.1.2/lib/type1/objects.c	2012-01-17 14:15:08.000000000 -0600
++@@ -1137,12 +1137,13 @@
++     "Context:  out of them", /* 46 */
++     "MatrixInvert:  can't", /* 47 */
++     "xiStub called", /* 48 */
++-    "Illegal access type1 abort() message" /* 49 */
+++    "Lines this big not supported", /* 49 */
+++    "Illegal access type1 abort() message" /* 50 */
++   };
++ 
++-  /* no is valid from 1 to 48 */
++-  if ( (number<1)||(number>48))
++-    number=49;
+++  /* no is valid from 1 to 49 */
+++  if ( (number<1)||(number>49))
+++    number=50;
++   return( err_msgs[number-1]);
++     
++ }
++Index: t1lib-5.1.2/lib/type1/type1.c
++===================================================================
++--- t1lib-5.1.2.orig/lib/type1/type1.c	2012-01-17 14:13:28.000000000 -0600
+++++ t1lib-5.1.2/lib/type1/type1.c	2012-01-17 14:19:54.000000000 -0600
++@@ -1012,6 +1012,7 @@
++   double nextdtana = 0.0;   /* tangent of post-delta against horizontal line */ 
++   double nextdtanb = 0.0;   /* tangent of post-delta against vertical line */ 
++   
+++  if (ppoints == NULL || numppoints < 1) Error0v("FindStems: No previous point!\n");
++  
++   /* setup default hinted position */
++   ppoints[numppoints-1].ax     = ppoints[numppoints-1].x;
++@@ -1289,7 +1290,7 @@
++ static int DoRead(CodeP)
++   int *CodeP;
++ {
++-  if (strindex >= CharStringP->len) return(FALSE); /* end of string */
+++  if (!CharStringP || strindex >= CharStringP->len) return(FALSE); /* end of string */
++   /* We handle the non-documented Adobe convention to use lenIV=-1 to
++      suppress charstring encryption. */
++   if (blues->lenIV==-1) {
++@@ -1700,7 +1701,7 @@
++   long pindex = 0;
++   
++   /* compute hinting for previous segment! */
++-  if (ppoints == NULL) Error0i("RLineTo: No previous point!\n");
+++  if (ppoints == NULL || numppoints < 2) Error0i("RLineTo: No previous point!\n");
++   FindStems( currx, curry, currx-ppoints[numppoints-2].x, curry-ppoints[numppoints-2].y, dx, dy);
++ 
++   /* Allocate a new path point and pre-setup data */
++@@ -1729,7 +1730,7 @@
++   long pindex = 0;
++   
++   /* compute hinting for previous point! */
++-  if (ppoints == NULL) Error0i("RRCurveTo: No previous point!\n");
+++  if (ppoints == NULL || numppoints < 2) Error0i("RRCurveTo: No previous point!\n");
++   FindStems( currx, curry, currx-ppoints[numppoints-2].x, curry-ppoints[numppoints-2].y, dx1, dy1);
++ 
++   /* Allocate three new path points and pre-setup data */
++@@ -1788,7 +1789,9 @@
++   long tmpind;
++   double deltax = 0.0;
++   double deltay = 0.0;
++-  
+++ 
+++  if (ppoints == NULL || numppoints < 1) Error0i("DoClosePath: No previous point!");
+++ 
++   /* If this ClosePath command together with the starting point of this
++      path completes to a segment aligned to a stem, we would miss
++      hinting for this point. --> Check and explicitly care for this! */
++@@ -1803,6 +1806,7 @@
++     deltax = ppoints[i].x - ppoints[numppoints-1].x;
++     deltay = ppoints[i].y - ppoints[numppoints-1].y;
++ 
+++    if (ppoints == NULL || numppoints <= i + 1) Error0i("DoClosePath: No previous point!");
++     /* save nummppoints and reset to move point */
++     tmpind = numppoints;
++     numppoints = i + 1;
++@@ -1905,7 +1909,7 @@
++     FindStems( currx, curry, 0, 0, dx, dy);
++   }
++   else {
++-    if (ppoints == NULL) Error0i("RMoveTo: No previous point!\n");
+++    if (ppoints == NULL || numppoints < 2) Error0i("RMoveTo: No previous point!\n");
++     FindStems( currx, curry, ppoints[numppoints-2].x, ppoints[numppoints-2].y, dx, dy);
++   }
++   
++@@ -2155,6 +2159,7 @@
++   DOUBLE cx, cy;
++   DOUBLE ex, ey;
++ 
+++  if (ppoints == NULL || numppoints < 8) Error0v("FlxProc: No previous point!");
++ 
++   /* Our PPOINT list now contains 7 moveto commands which
++      are about to be consumed by the Flex mechanism. --> Remove these
++@@ -2324,6 +2329,7 @@
++ /*   Returns currentpoint on stack          */
++ static void FlxProc2()
++ {
+++  if (ppoints == NULL || numppoints < 1) Error0v("FlxProc2: No previous point!");
++   /* Push CurrentPoint on fake PostScript stack */
++   PSFakePush( ppoints[numppoints-1].x);
++   PSFakePush( ppoints[numppoints-1].y);
+--- t1lib-5.1.2.orig/debian/patches/format-security.diff
++++ t1lib-5.1.2/debian/patches/format-security.diff
+@@ -0,0 +1,33 @@
++--- a/lib/type1/objects.c
+++++ b/lib/type1/objects.c
++@@ -957,7 +957,7 @@
++  
++        sprintf(typemsg, "Wrong object type in %s; expected %s, found %s.\n",
++                   name, TypeFmt(expect), TypeFmt(obj->type));
++-       IfTrace0(TRUE,typemsg);
+++       IfTrace1(TRUE, "%s", typemsg);
++  
++        ObjectPostMortem(obj);
++  
++--- a/lib/t1lib/t1subset.c
+++++ b/lib/t1lib/t1subset.c
++@@ -759,7 +759,7 @@
++ 	     tr_len);
++     T1_PrintLog( "T1_SubsetFont()", err_warn_msg_buf,
++ 		 T1LOG_DEBUG);
++-    l+=sprintf( &(trailerbuf[l]), linebuf); /* contains the PostScript trailer */
+++    l+=sprintf( &(trailerbuf[l]), "%s", linebuf); /* contains the PostScript trailer */
++   }
++   
++   /* compute size of output file */
++--- a/lib/type1/objects.h
+++++ b/lib/type1/objects.h
++@@ -214,7 +214,7 @@
++ /*SHARED*/
++ /* NDW: personally, I want to see status and error messages! */
++ #define IfTrace0(condition,model)                                 \
++-        {if (condition) printf(model);}
+++        {if (condition) fputs(model,stdout);}
++ #define IfTrace1(condition,model,arg0)                            \
++         {if (condition) printf(model,arg0);}
++ #define IfTrace2(condition,model,arg0,arg1)                       \
+--- t1lib-5.1.2.orig/debian/patches/series
++++ t1lib-5.1.2/debian/patches/series
+@@ -0,0 +1,8 @@
++no-docs.diff
++no-config.diff
++lib-cleanup.diff
++#segfault.diff
++format-security.diff
++CVE-2011-0764.diff
++CVE-2011-1552_1553_1554.patch
++CVE-2010-2642.patch
+--- t1lib-5.1.2.orig/debian/man/FontDatabase.5
++++ t1lib-5.1.2/debian/man/FontDatabase.5
+@@ -0,0 +1,77 @@
++.TH FONTDATABASE 5
++.SH NAME
++FontDataBase \- database of fonts accessible to t1lib.
++.SH DESCRIPTION
++This manual page has been written for the Debian GNU/Linux
++distribution.  It has been adapted from the documentation included in
++the upstream
++.B t1lib
++distribution.
++.PP
++.B /etc/t1lib/FontDataBase
++is a text file which contains, minimally, the basenames of Type 1 font 
++files to be made accessible to the
++.B t1lib
++font rasterizer library.  The format is intentionally similar to that
++of the
++.B fonts.dir
++and
++.B fonts.scale
++files used by X11.
++.PP
++Line 1 of this file contains a positive integer specifying the number
++of fonts declared in that file. This is as in the
++.B fonts.dir
++files of the X11 system.
++.PP
++All remaining lines contain declarations of one font each. The only
++thing taken from such a line is the last string (delimited by white
++space) in it. It is assumed to be a filename of the format
++\fIbasename\fR.\fIsomeextension\fR.
++.PP
++The \fIbasename\fR part is assumed to be the
++.BR basename (1)
++of a fontfile.  After the a string has been parsed, the
++.I extension
++is cut off and replaced in turn with
++.I .pfa
++and
++.I .pfb.
++The initialization routine tries to open a font file in
++its search path with one of the resulting filenames.
++.PP
++The remainder of the line, i.e., from beginning to the start of the
++filename string, is completely ignored and thus may contain
++information for other programs.
++.SH EXAMPLES
++Here is a minimal font database file for 4 fonts:
++.sp
++.nf
++4
++isvl.afm
++isvli.afm
++isvd.afm
++isvdi.afm
++.fi
++.PP
++This file is \fIminimal\fR, because it contains just the information
++needed, and nothing not needed by the library. 
++.PP
++Here is a more realistic example, which allows an application to match
++a fully qualified X11 fontname to a FontID in
++.B t1lib.
++This is also a valid font database file:
++.sp
++.nf
++4
++Souvenir Souvenir-Light       --- \-itc-souvenir-light-r-normal--#-0-0-0-p-0-iso8859-1 isvl.afm
++Souvenir Souvenir-LightItalic -*- \-itc-souvenir-light-i-normal--#-0-0-0-p-0-iso8859-1 isvli.afm
++          Souvenir-Demi       *-- \-itc-souvenir-demi-r-normal--#-0-0-0-p-0-iso8859-1 isvd.afm
++          Souvenir-DemiItalic **- \-itc-souvenir-demi-i-normal--#-0-0-0-p-0-iso8859-1 isvdi.afm
++.fi
++.PP
++.SH FILES
++.I /etc/t1lib/FontDataBase
++.SH "SEE ALSO"
++.BR mkfontdir (1x)
++
+--- t1lib-5.1.2.orig/debian/man/t1libconfig.8
++++ t1lib-5.1.2/debian/man/t1libconfig.8
+@@ -0,0 +1,57 @@
++.TH T1LIBCONFIG 8
++.SH NAME
++.B t1libconfig
++\- create the t1lib.config and FontDataBase files for t1lib
++.SH SYNOPSIS
++.B t1libconfig
++[
++.BR \-v\fP, \fB\-\-version
++]
++[
++.BR \-h\fP, \fB\-\-help
++]
++.B \-\-force
++]
++[
++.B fontdirectory...
++]
++.SH DESCRIPTION
++.B t1libconfig
++scans a list of directories for Type 1 fonts and font metric files,
++and generates a configuration file and font database file for the
++.B t1lib
++rasterizer library accordingly.  By default, it looks in all
++subdirectories of /usr/X11R6/lib/X11/fonts, and in
++/usr/lib/ghostscript.  Extra directories to search may be specified on 
++the command line.  The
++.B t1libconfig
++script tries not to scan the same directory twice (this is, however,
++not foolproof, since /usr/X11R6/lib/X11/fonts and /usr/lib/X11/fonts
++typically point to the same directory on GNU/Linux systems).
++.SH OPTIONS
++.TP
++.BR \-v\fP, \fB\-\-version
++Print the version of
++.B t1libconfig
++and exit.
++.TP
++.BR \-h\fP, \fB\-\-help
++Print help about usage and exit.
++.TP
++.B \-\-force
++Force the generation of new configuration files even if these files
++already exist on the system.
++.SH FILES
++.TP 25
++.B /etc/t1lib/t1lib.config
++Contains configuration information for t1lib, including
++colon-separated lists of paths to Type 1 font files and font metrics
++files, and the location of the default font database file
++.TP 25
++.B /etc/t1lib/FontDataBase
++Contains a list of the names of Type 1 font files to be used by t1lib.
++.SH AUTHOR
++David Huggins-Daines <dhd@debian.org>
++.SH SEE ALSO
++.BR FontDataBase (5)
++
+--- t1lib-5.1.2.orig/debian/man/xglyph.1
++++ t1lib-5.1.2/debian/man/xglyph.1
+@@ -0,0 +1,111 @@
++.TH XGLYPH 1
++.SH NAME
++xglyph \- demonstration program for the t1lib font rasterizer library.
++.SH SYNOPSIS
++.B xglyph
++[
++.B fontfile...
++]
++.SH "DESCRIPTION"
++This manual page documents briefly the
++.BR xglyph
++program.
++This manual page was written for the Debian GNU/Linux distribution
++because the original program does not have a manual page.
++.PP
++.B xglyph
++is a program which demonstrates the capabilities of the
++.B t1lib
++library.  It allows the user to view an arbitrary character or string
++rendered in the various ways pgossible with the library.  By default,
++it writes a log file named \fIt1lib.log\fR in the current directory.
++.PP
++If invoked with no arguments, it will attempt to read the global
++configuration file and font database.  It will also accept any number
++of filenames on the command line, in which case these are treated as
++font files to be loaded instead of the default font database.
++.SH "OPTIONS"
++.TP
++.BR \-\-help
++Shows a brief help text
++.TP
++.BR \-\-Help
++Shows a description of all options
++.TP
++.BR \-\-noGrid 
++Don't draw grid lines when displaying glyphs
++.TP
++.BR \-\-setPad 
++Set bitmap padding
++.TP
++.BR \-\-logError
++Log errors only
++.TP
++.BR \-\-logWarning
++Log errors and warnings
++.TP
++.BR \-\-logStatistic
++Log errors, warnings, and statistics
++.TP
++.BR \-\-logDebug
++Log just about everything
++.TP
++.BR \-\-ignoreForceBold
++Don't make pseudo-boldface glyphs
++.TP
++.BR \-\-ignoreFamilyAlignment
++.TP
++.BR \-\-ignoreHinting
++Ignore hints when scaling glyphs
++.TP
++.BR \-\-debugLine
++Show debugging info for line-drawing
++operations in the rasterizer
++.TP
++.BR \-\-debugRegion
++Show debugging info for region operations in
++the rasterizer
++.TP
++.BR \-\-debugPath
++Show debugging info for path operations in the
++rasterizer
++.TP
++.BR \-\-debugFont
++.TP
++.BR \-\-debugHint
++Show debugging info for hinting in the rasterizer.
++.TP
++.BR \-\-checkPerformance
++Do some simple performance tests while rasterizing.
++.TP
++.BR \-\-checkCopyFont
++Check that copying fonts works.
++.TP
++.BR \-\-checkConcatGlyphs
++Check that concatenating glyphs works.
++.TP
++.BR \-\-checkBadCharHandling
++.TP
++.BR \-\-checkDefaultEncoding
++Set a default encoding vector.
++.SH "ENVIRONMENT"
++In the Debian GNU/Linux version of this program, the environment
++variable
++.B T1LIB_CONFIG,
++if set, points to an alternate configuration
++file with which to initialize the library.
++.SH "SEE ALSO"
++.BR FontDataBase (5),
++.BR t1libconfig (8).
++.PP
++.B xglyph
++is much more fully documented in the LaTeX documentation that
++accompanies the upstream
++.B t1lib
++distribution.  This documentation is installed in PostScript and source
++formats with the t1lib-dev package in /usr/share/doc/t1lib-dev, and is
++also accessible through the dwww system.
++.SH AUTHOR
++This manual page was written by David Huggins-Daines
++<dhd@debian.org>, for the Debian GNU/Linux system (but may
++be used by others).
+--- t1lib-5.1.2.orig/debian/man/type1afm.1
++++ t1lib-5.1.2/debian/man/type1afm.1
+@@ -0,0 +1,34 @@
++.TH TYPE1AFM 1
++.SH NAME
++.B type1afm
++\- create a font metrics file from a Type 1 font file
++.SH SYNOPSIS
++.B type1afm
++[
++.BR \-l
++]
++.B fontfile
++[
++.B fontfile...
++]
++.SH DESCRIPTION
++This manual page was written for the Debian GNU/Linux distribution
++because the original program does not have a manual page.
++.PP
++.B type1afm
++reads in Type 1 font files specified on the command line, rasterizes
++them to 1000bp, and writes AFM (font metrics) files based on the
++observed metrics information.
++.PP
++The AFM file is created in the same directory as the font file, so be
++sure that you have write access there before running this program.
++.SH OPTIONS
++.TP
++.BR \-l
++Write a log file
++.SH SEE ALSO
++.BR getafm (1)
++.SH AUTHOR
++This manual page was David Huggins-Daines <dhd@debian.org>
++for the Debian GNU/Linux distribution (but may be used by others)
++
diff --git a/source/l/t1lib/t1lib_5.1.2-3.diff b/source/l/t1lib/t1lib_5.1.2-3.diff
deleted file mode 100644
index 8ae0b3ad..00000000
--- a/source/l/t1lib/t1lib_5.1.2-3.diff
+++ /dev/null
@@ -1,1830 +0,0 @@
---- t1lib-5.1.2.orig/debian/t1libconfig
-+++ t1lib-5.1.2/debian/t1libconfig
-@@ -0,0 +1,163 @@
-+#!/bin/sh -e
-+
-+# to test POSIX-correctness, change hash-bang to /bin/bash and uncomment
-+# the following line:
-+
-+# set -o posix
-+
-+# Very simple configuration script for t1lib.  Checks a couple of
-+# directories that might contain fonts, and if they exist, adds
-+# anything ending in .pfa or pfb to the font database.  A few things
-+# borrowed from paperconfig, (C) 1996, Yves Arrouye
-+# <arrouye@debian.org>
-+
-+# note that this creates the "minimal" font database accepted by t1lib,
-+# and doesn't look in every possible place for fonts.  It is mostly
-+# provided so that xglyph will work out of the box...
-+
-+# Written by David Huggins-Daines <dhd@debian.org>
-+
-+usage() {
-+    if [ "$1" = -h ]
-+    then
-+	exec 1>&2
-+	echo -n U
-+    else
-+	echo -n u
-+    fi
-+
-+    echo "sage: `basename $0` [ -v, --version ] [ -h, --help ] [ --force ]"
-+    echo "                   [ fontdirs... ]"
-+
-+    if [ "$1" = -h ]
-+    then
-+	cat <<EOF
-+
-+Options: -v, --verbose          print version information and exit
-+         -h, --help             print this help and exit
-+         --force                force configuration
-+EOF
-+	exit 0
-+    else
-+	exit 1
-+    fi
-+}
-+
-+version=0.2
-+topfontdirs="/usr/share/fonts/type1 /usr/share/fonts/X11"
-+for dir in $topfontdirs; do
-+   if [ -d $dir ]; then
-+       subdirs=$(find $dir -type d -printf "%p ")
-+       fontdirs="$subdirs $fontdirs"
-+   fi
-+done
-+conffile=/etc/t1lib/t1lib.config
-+confdir=/etc/t1lib/
-+dbase=/etc/t1lib/FontDatabase
-+temp=/etc/t1lib/FontDatabase.tmp
-+
-+force=0
-+
-+while [ $# -ne 0 ]
-+do
-+    case "$1" in
-+	-v|--version)
-+	    echo "`basename $0` version $version" \
-+		"by David Huggins-Daines <dhd@debian.org>"
-+	    exit 0
-+	    ;;
-+	-h|--help)
-+	    usage -h
-+	    ;;
-+	--force)
-+	    force=1
-+	    ;;
-+	*)
-+	    # hairy way to remove a trailing backslash (should use perl)
-+	    pat=`expr $1 : "\(.*\)\/\$" || echo $1`
-+	    # hairier way to find a string anywhere in another string
-+	    # should really use perl.
-+	    if ! grep $pat <<EOF >/dev/null 2>&1
-+$fontdirs
-+EOF
-+	    then
-+		fontdirs="$fontdirs $1"
-+	    fi
-+	    ;;
-+    esac
-+    shift
-+done
-+
-+# We presume that if the database exists, then so does the
-+# configuration file.  Hopefully this won't break anything.
-+
-+if [ $force -eq 1 ] || [ ! -e $dbase ]; then
-+    fontpath=""
-+    afmpath=""
-+
-+    mkdir -p $confdir || true
-+
-+    echo -n "Searching for Type 1 fonts and AFM files..."
-+
-+    for i in $fontdirs
-+    do
-+	if [ -d $i ] && ls $i/*.pf[ab] > /dev/null 2>&1; then
-+	    if [ -n "$fontpath" ]; then
-+		fontpath="$fontpath:$i"
-+	    else
-+		fontpath="$i"
-+	    fi
-+	    
-+	    if ls $i/*.afm > /dev/null 2>&1; then
-+		if [ -n "$afmpath" ]; then
-+		    afmpath="$afmpath:$i"
-+		else
-+		    afmpath="$i"
-+		fi
-+	    fi
-+	    # get a listing of all the fonts in each dir
-+	    find $i -maxdepth 1 -name *.pf[ab] -printf '%f\n' >> $temp
-+	fi
-+    done
-+    if [ -z "$fontpath" ]; then
-+	cat <<EOF
-+
-+No Type 1 fonts were found in the expected locations.
-+If you want t1lib to be aware of your fonts, you should run
-+/usr/sbin/t1libconfig with the names of your local font directories as
-+arguments, or you should edit the /etc/t1lib/FontDatabase file manually.
-+See the FontDatabase(5) manual page for more information.
-+
-+Press [return] to continue.
-+EOF
-+        read foo || true
-+	rm -f $temp
-+    else
-+        echo "done."
-+        echo -n "Building font database..."
-+        fontcount=`wc -l $temp || true`
-+        echo $fontcount > $dbase
-+        cat $temp >> $dbase
-+        rm -f $temp
-+        echo "done."
-+    fi
-+
-+    # now set the paths in the config file
-+    cat <<EOF >$conffile
-+t1lib.config - global configuration file for t1lib.
-+It was created automatically on `date`
-+by the t1libconfig script.
-+
-+Run /usr/sbin/t1libconfig --force to rebuild it.
-+    
-+ENCODING=.
-+AFM=$afmpath
-+TYPE1=$fontpath
-+FONTDATABASE=$dbase
-+EOF
-+else
-+    echo "Configuration and font database files already exist."
-+    echo "Run /usr/sbin/t1libconfig --force to rebuild them."
-+fi
-+
-+exit 0
---- t1lib-5.1.2.orig/debian/t1lib-bin.postrm
-+++ t1lib-5.1.2/debian/t1lib-bin.postrm
-@@ -0,0 +1,8 @@
-+#!/bin/sh
-+set -e
-+
-+if [ "$1" = "purge" ]; then
-+	rm -rf /etc/t1lib
-+fi
-+
-+#DEBHELPER#
---- t1lib-5.1.2.orig/debian/libt1-5.install
-+++ t1lib-5.1.2/debian/libt1-5.install
-@@ -0,0 +1 @@
-+debian/tmp/usr/lib/libt1*.so.*
---- t1lib-5.1.2.orig/debian/libt1-doc.docs
-+++ t1lib-5.1.2/debian/libt1-doc.docs
-@@ -0,0 +1 @@
-+doc/*.pdf
---- t1lib-5.1.2.orig/debian/libt1-dev.docs
-+++ t1lib-5.1.2/debian/libt1-dev.docs
-@@ -0,0 +1,2 @@
-+README.t1lib-*
-+README.t1python
---- t1lib-5.1.2.orig/debian/t1lib-bin.dirs
-+++ t1lib-5.1.2/debian/t1lib-bin.dirs
-@@ -0,0 +1 @@
-+etc/t1lib
---- t1lib-5.1.2.orig/debian/t1lib-bin.manpages
-+++ t1lib-5.1.2/debian/t1lib-bin.manpages
-@@ -0,0 +1,4 @@
-+debian/man/FontDatabase.5
-+debian/man/t1libconfig.8
-+debian/man/type1afm.1
-+debian/man/xglyph.1
---- t1lib-5.1.2.orig/debian/control
-+++ t1lib-5.1.2/debian/control
-@@ -0,0 +1,84 @@
-+Source: t1lib
-+Section: libs
-+Priority: optional
-+Maintainer: Ruben Molina <rmolina@udea.edu.co>
-+Build-Depends: cdbs, debhelper (>= 7), autotools-dev, libice-dev, libsm-dev, libx11-dev, libxext-dev, libxaw7-dev, quilt
-+Standards-Version: 3.8.0
-+Homepage: ftp://sunsite.unc.edu/pub/Linux/libs/graphics/
-+
-+Package: libt1-5
-+Section: libs
-+Architecture: any
-+Depends: ${shlibs:Depends}, ${misc:Depends}
-+Description: Type 1 font rasterizer library - runtime
-+ T1lib is an enhanced rasterizer for Type 1 fonts.
-+ .
-+ T1lib is based on the X11R5 font rasterizer code, but operates independently
-+ of X11.  It includes many enhancements, including underlining, antialiasing,
-+ user-defined slant and extension factors, and rotation.
-+ .
-+ This package contains the shared libraries needed to run programs using T1lib.
-+
-+Package: libt1-dev
-+Section: libdevel
-+Architecture: any
-+Depends: libt1-5 (= ${binary:Version}), libice-dev, libsm-dev, libx11-dev,
-+ libxext-dev, libxaw7-dev
-+Recommends: libt1-doc
-+Conflicts: t1lib-dev, t1lib1-dev
-+Description: Type 1 font rasterizer library - development
-+ T1lib is an enhanced rasterizer for Type 1 fonts.
-+ .
-+ T1lib is based on the X11R5 font rasterizer code, but operates independently
-+ of X11.  It includes many enhancements, including underlining, antialiasing,
-+ user-defined slant and extension factors, and rotation.
-+ .
-+ This package contains the header files and static libraries needed to
-+ develop programs using T1lib.
-+ .
-+ Please note, that PDF documentation is placed in libt1-doc
-+
-+Package: t1lib-bin
-+Architecture: any
-+Section: misc
-+Depends: ${shlibs:Depends}
-+Provides: t1lib1-bin
-+Replaces: t1lib1-bin
-+Conflicts: t1lib1-bin
-+Description: Type 1 font rasterizer library - user binaries
-+ T1lib is an enhanced rasterizer for Type 1 fonts.
-+ .
-+ T1lib is based on the X11R5 font rasterizer code, but operates independently
-+ of X11.  It includes many enhancements, including underlining, antialiasing,
-+ user-defined slant and extension factors, and rotation.
-+ .
-+ This package contains the programs "xglyph" and "type1afm", included in the
-+ upstream T1lib distribution.  It also contains the "t1libconfig"
-+ script used to configure t1lib.
-+
-+Package: libt1-doc
-+Architecture: all
-+Section: doc
-+Description: Type 1 font rasterizer library - developers documentation
-+ T1lib is an enhanced rasterizer for Type 1 fonts.
-+ .
-+ T1lib is based on the X11R5 font rasterizer code, but operates independently
-+ of X11.  It includes many enhancements, including underlining, antialiasing,
-+ user-defined slant and extension factors, and rotation.
-+ .
-+ This package contains developers documentation.
-+
-+Package: libt1-5-dbg
-+Section: libdevel
-+Priority: extra
-+Architecture: any
-+Depends: libt1-5 (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
-+Description: Type 1 font rasterizer library - debugging runtime
-+ T1lib is an enhanced rasterizer for Type 1 fonts.
-+ .
-+ T1lib is based on the X11R5 font rasterizer code, but operates independently
-+ of X11.  It includes many enhancements, including underlining, antialiasing,
-+ user-defined slant and extension factors, and rotation.
-+ .
-+ This package contains debugging information.
-+
---- t1lib-5.1.2.orig/debian/NEWS
-+++ t1lib-5.1.2/debian/NEWS
-@@ -0,0 +1,9 @@
-+t1lib (5.0.0-3) unstable; urgency=low
-+
-+  This version of t1lib package is binary incompatible with the previous
-+  one in Debian. Details about changes are documented in following files
-+  in /usr/share/doc/libt1-dev directory:
-+   - changelog.gz
-+   - README.t1lib-5.0.0.gz
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Jan 2004 00:02:29 +0100
---- t1lib-5.1.2.orig/debian/libt1-5.symbols
-+++ t1lib-5.1.2/debian/libt1-5.symbols
-@@ -0,0 +1,381 @@
-+libt1.so.5 libt1-5 #MINVER#
-+ BezierTerminationTest@Base 5.1.0
-+ CRASTERCompressionType@Base 5.1.0
-+ CacheBLimit@Base 5.1.0
-+ CachedChars@Base 5.1.0
-+ CachedFonts@Base 5.1.0
-+ ConicDebug@Base 5.1.0
-+ Continuity@Base 5.1.0
-+ CurFontEnv@Base 5.1.0
-+ CurFontName@Base 5.1.0
-+ DLadd@Base 5.1.0
-+ DLdiv@Base 5.1.0
-+ DLmult@Base 5.1.0
-+ DLsub@Base 5.1.0
-+ DeviceSpecifics@Base 5.1.0
-+ FPXYboth@Base 5.1.0
-+ FPXonly@Base 5.1.0
-+ FPYonly@Base 5.1.0
-+ FPdiv@Base 5.1.0
-+ FPmult@Base 5.1.0
-+ FPstarslash@Base 5.1.0
-+ FXYConvert@Base 5.1.0
-+ FXYboth@Base 5.1.0
-+ FXonly@Base 5.1.0
-+ FYonly@Base 5.1.0
-+ FontBase@Base 5.1.0
-+ FontDebug@Base 5.1.0
-+ ForceAFMBBox@Base 5.1.0
-+ ForceFloat@Base 5.1.0
-+ FreeAFMData@Base 5.1.0
-+ GetType1CharString@Base 5.1.0
-+ HighHex@Base 5.1.0
-+ HintDebug@Base 5.1.0
-+ IXYConvert@Base 5.1.0
-+ IXYboth@Base 5.1.0
-+ IXonly@Base 5.1.0
-+ IYonly@Base 5.1.0
-+ ImageDebug@Base 5.1.0
-+ InDotSection@Base 5.1.0
-+ Init_BuiltInEncoding@Base 5.1.0
-+ InternalTrace@Base 5.1.0
-+ LineDebug@Base 5.1.0
-+ LineIOTrace@Base 5.1.0
-+ LowHex@Base 5.1.0
-+ MemoryDebug@Base 5.1.0
-+ MustCheckArgs@Base 5.1.0
-+ MustCrash@Base 5.1.0
-+ MustTraceCalls@Base 5.1.0
-+ OffPageDebug@Base 5.1.0
-+ PathDebug@Base 5.1.0
-+ ProcessHints@Base 5.1.0
-+ QueryFontLib@Base 5.1.0
-+ RegionDebug@Base 5.1.0
-+ SaveFontPaths@Base 5.1.0
-+ SearchDictName@Base 5.1.0
-+ SetFuncRequestID@Base 5.1.0
-+ SpaceDebug@Base 5.1.0
-+ StdEncArrayP@Base 5.1.0
-+ StrokeDebug@Base 5.1.0
-+ T1Close@Base 5.1.0
-+ T1GetDecrypt@Base 5.1.0
-+ T1GetFileSize@Base 5.1.0
-+ T1GetTrailer@Base 5.1.0
-+ T1Getc@Base 5.1.0
-+ T1Gets@Base 5.1.0
-+ T1Open@Base 5.1.0
-+ T1Read@Base 5.1.0
-+ T1Ungetc@Base 5.1.0
-+ T1_AAFillOutline@Base 5.1.0
-+ T1_AAGetBitsPerPixel@Base 5.1.0
-+ T1_AAGetGrayValues@Base 5.1.0
-+ T1_AAGetLevel@Base 5.1.0
-+ T1_AAHGetGrayValues@Base 5.1.0
-+ T1_AAHSetGrayValues@Base 5.1.0
-+ T1_AANGetGrayValues@Base 5.1.0
-+ T1_AANSetGrayValues@Base 5.1.0
-+ T1_AASetBitsPerPixel@Base 5.1.0
-+ T1_AASetChar@Base 5.1.0
-+ T1_AASetGrayValues@Base 5.1.0
-+ T1_AASetLevel@Base 5.1.0
-+ T1_AASetRect@Base 5.1.0
-+ T1_AASetSmartLimits@Base 5.1.0
-+ T1_AASetSmartMode@Base 5.1.0
-+ T1_AASetString@Base 5.1.0
-+ T1_AFM_ptr@Base 5.1.0
-+ T1_AbsolutePath@Base 5.1.0
-+ T1_AddFont@Base 5.1.0
-+ T1_AddFontDataBase@Base 5.1.0
-+ T1_AddFontDataBaseXLFD@Base 5.1.0
-+ T1_AddToFileSearchPath@Base 5.1.0
-+ T1_CheckEndian@Base 5.1.0
-+ T1_CheckForFontID@Base 5.1.0
-+ T1_CheckForInit@Base 5.1.0
-+ T1_ClearStrokeFlag@Base 5.1.0
-+ T1_CloseLib@Base 5.1.0
-+ T1_ConcatGlyphs@Base 5.1.0
-+ T1_ConcatOutlines@Base 5.1.0
-+ T1_CopyFont@Base 5.1.0
-+ T1_CopyGlyph@Base 5.1.0
-+ T1_CopyOutline@Base 5.1.0
-+ T1_DeleteAllSizes@Base 5.1.0
-+ T1_DeleteEncoding@Base 5.1.0
-+ T1_DeleteFont@Base 5.1.0
-+ T1_DeleteSize@Base 5.1.0
-+ T1_DumpGlyph@Base 5.1.0
-+ T1_DumpPath@Base 5.1.0
-+ T1_ENC_ptr@Base 5.1.0
-+ T1_ExtendFont@Base 5.1.0
-+ T1_ExtendHMatrix@Base 5.1.0
-+ T1_ExtendVMatrix@Base 5.1.0
-+ T1_FDBXLFD_ptr@Base 5.1.0
-+ T1_FDB_ptr@Base 5.1.0
-+ T1_FillOutline@Base 5.1.0
-+ T1_FreeCompCharData@Base 5.1.0
-+ T1_FreeGlyph@Base 5.1.0
-+ T1_FreeOutline@Base 5.1.0
-+ T1_GenerateAFMFallbackInfo@Base 5.1.0
-+ T1_GetAfmFileName@Base 5.1.0
-+ T1_GetAfmFilePath@Base 5.1.0
-+ T1_GetAllCharNames@Base 5.1.0
-+ T1_GetBitmapPad@Base 5.1.0
-+ T1_GetCharBBox@Base 5.1.0
-+ T1_GetCharName@Base 5.1.0
-+ T1_GetCharOutline@Base 5.1.0
-+ T1_GetCharString@Base 5.1.0
-+ T1_GetCharWidth@Base 5.1.0
-+ T1_GetCompCharData@Base 5.1.0
-+ T1_GetCompCharDataByIndex@Base 5.1.0
-+ T1_GetEncodingIndex@Base 5.1.0
-+ T1_GetEncodingIndices@Base 5.1.0
-+ T1_GetEncodingScheme@Base 5.1.0
-+ T1_GetExtend@Base 5.1.0
-+ T1_GetFamilyName@Base 5.1.0
-+ T1_GetFileSearchPath@Base 5.1.0
-+ T1_GetFontBBox@Base 5.1.0
-+ T1_GetFontFileName@Base 5.1.0
-+ T1_GetFontFilePath@Base 5.1.0
-+ T1_GetFontName@Base 5.1.0
-+ T1_GetFullName@Base 5.1.0
-+ T1_GetIsFixedPitch@Base 5.1.0
-+ T1_GetItalicAngle@Base 5.1.0
-+ T1_GetKerning@Base 5.1.0
-+ T1_GetLibIdent@Base 5.1.0
-+ T1_GetLinePosition@Base 5.1.0
-+ T1_GetLineThickness@Base 5.1.0
-+ T1_GetMetricsInfo@Base 5.1.0
-+ T1_GetMoveOutline@Base 5.1.0
-+ T1_GetNoCompositeChars@Base 5.1.0
-+ T1_GetNoFonts@Base 5.1.0
-+ T1_GetNoKernPairs@Base 5.1.0
-+ T1_GetNotice@Base 5.1.0
-+ T1_GetSlant@Base 5.1.0
-+ T1_GetStringBBox@Base 5.1.0
-+ T1_GetStringOutline@Base 5.1.0
-+ T1_GetStringWidth@Base 5.1.0
-+ T1_GetStrokeMode@Base 5.1.0
-+ T1_GetStrokeWidth@Base 5.1.0
-+ T1_GetTransform@Base 5.1.0
-+ T1_GetUnderlinePosition@Base 5.1.0
-+ T1_GetUnderlineThickness@Base 5.1.0
-+ T1_GetVersion@Base 5.1.0
-+ T1_GetWeight@Base 5.1.0
-+ T1_GetlenIV@Base 5.1.0
-+ T1_INFINITY@Base 5.1.0
-+ T1_InitLib@Base 5.1.0
-+ T1_IsInternalChar@Base 5.1.0
-+ T1_LoadEncoding@Base 5.1.0
-+ T1_LoadFont@Base 5.1.0
-+ T1_ManipulatePath@Base 5.1.0
-+ T1_MirrorHMatrix@Base 5.1.0
-+ T1_MirrorVMatrix@Base 5.1.0
-+ T1_PFAB_ptr@Base 5.1.0
-+ T1_PrintLog@Base 5.1.0
-+ T1_QueryCompositeChar@Base 5.1.0
-+ T1_QueryLigs@Base 5.1.0
-+ T1_QueryX11Support@Base 5.1.0
-+ T1_ReencodeFont@Base 5.1.0
-+ T1_RelativePath@Base 5.1.0
-+ T1_RotateMatrix@Base 5.1.0
-+ T1_ScaleOutline@Base 5.1.0
-+ T1_SetAfmFileName@Base 5.1.0
-+ T1_SetBitmapPad@Base 5.1.0
-+ T1_SetChar@Base 5.1.0
-+ T1_SetDefaultEncoding@Base 5.1.0
-+ T1_SetDeviceResolutions@Base 5.1.0
-+ T1_SetFileSearchPath@Base 5.1.0
-+ T1_SetFontDataBase@Base 5.1.0
-+ T1_SetFontDataBaseXLFD@Base 5.1.0
-+ T1_SetLinePosition@Base 5.1.0
-+ T1_SetLineThickness@Base 5.1.0
-+ T1_SetLogLevel@Base 5.1.0
-+ T1_SetRasterFlags@Base 5.1.0
-+ T1_SetRect@Base 5.1.0
-+ T1_SetString@Base 5.1.0
-+ T1_SetStrokeFlag@Base 5.1.0
-+ T1_SetStrokeWidth@Base 5.1.0
-+ T1_ShearHMatrix@Base 5.1.0
-+ T1_ShearVMatrix@Base 5.1.0
-+ T1_SlantFont@Base 5.1.0
-+ T1_StrError@Base 5.1.0
-+ T1_StrokeFont@Base 5.1.0
-+ T1_SubsetFont@Base 5.1.0
-+ T1_TransformFont@Base 5.1.0
-+ T1_TransformMatrix@Base 5.1.0
-+ T1_Type1OperatorFlags@Base 5.1.0
-+ T1_Up@Base 5.1.0
-+ T1_WriteAFMFallbackFile@Base 5.1.0
-+ T1_errno@Base 5.1.0
-+ T1_fdb@Base 5.1.0
-+ T1_fdbxlfd@Base 5.1.0
-+ T1aa_SmartOn@Base 5.1.0
-+ T1aa_bg@Base 5.1.0
-+ T1aa_bpp@Base 5.1.0
-+ T1aa_smartlimit1@Base 5.1.0
-+ T1aa_smartlimit2@Base 5.1.0
-+ T1eexec@Base 5.1.0
-+ T1int_CreateNewFontSize@Base 5.1.0
-+ T1int_GetLastFontSize@Base 5.1.0
-+ T1int_QueryFontSize@Base 5.1.0
-+ T1int_QuerySEAC@Base 5.1.0
-+ T1int_Type1QuerySEAC@Base 5.1.0
-+ T1io_reset@Base 5.1.0
-+ T1lib_parseFile@Base 5.1.0
-+ TheCurrentFont@Base 5.1.0
-+ Type1Char@Base 5.1.0
-+ Type1Line@Base 5.1.0
-+ currstartstem@Base 5.1.0
-+ digit_value@Base 5.1.0
-+ err_warn_msg_buf@Base 5.1.0
-+ errornumber@Base 5.1.0
-+ filestats@Base 5.1.0
-+ fill@Base 5.1.0
-+ fillrun@Base 5.1.0
-+ fontfcnA@Base 5.1.0
-+ fontfcnB@Base 5.1.0
-+ fontfcnB_ByName@Base 5.1.0
-+ fontfcnB_string@Base 5.1.0
-+ fontfcnRect@Base 5.1.0
-+ initFont@Base 5.1.0
-+ intT1_Env_GetCompletePath@Base 5.1.0
-+ intT1_FreeSearchPaths@Base 5.1.0
-+ intT1_ScanConfigFile@Base 5.1.0
-+ intT1_SetupDefaultSearchPaths@Base 5.1.0
-+ intT1_scanFontDBase@Base 5.1.0
-+ intT1_scanFontDBaseXLFD@Base 5.1.0
-+ linebuf@Base 5.1.0
-+ not_def@Base 5.1.0
-+ numalignmentzones@Base 5.1.0
-+ numstems@Base 5.1.0
-+ objFormatArray@Base 5.1.0
-+ objFormatBoolean@Base 5.1.0
-+ objFormatEncoding@Base 5.1.0
-+ objFormatFile@Base 5.1.0
-+ objFormatInteger@Base 5.1.0
-+ objFormatName@Base 5.1.0
-+ objFormatReal@Base 5.1.0
-+ objFormatString@Base 5.1.0
-+ oldhor@Base 5.1.0
-+ oldhorhalf@Base 5.1.0
-+ oldvert@Base 5.1.0
-+ oldverthalf@Base 5.1.0
-+ pFontBase@Base 5.1.0
-+ readFont@Base 5.1.0
-+ reportusage@Base 5.1.0
-+ resetFont@Base 5.1.0
-+ scan_font@Base 5.1.0
-+ scan_token@Base 5.1.0
-+ stck_state@Base 5.1.0
-+ stems@Base 5.1.0
-+ swathrightmost@Base 5.1.0
-+ swathxsort@Base 5.1.0
-+ t1_Allocate@Base 5.1.0
-+ t1_ApplyContinuity@Base 5.1.0
-+ t1_ArgErr@Base 5.1.0
-+ t1_Bezier@Base 5.1.0
-+ t1_BoundingBox@Base 5.1.0
-+ t1_BoxClip@Base 5.1.0
-+ t1_BoxPath@Base 5.1.0
-+ t1_Bresenham@Base 5.1.0
-+ t1_ChangeDirection@Base 5.1.0
-+ t1_CloseHints@Base 5.1.0
-+ t1_ClosePath@Base 5.1.0
-+ t1_Consume@Base 5.1.0
-+ t1_Copy@Base 5.1.0
-+ t1_CopyPath@Base 5.1.0
-+ t1_CopyRegion@Base 5.1.0
-+ t1_CopySpace@Base 5.1.0
-+ t1_Destroy@Base 5.1.0
-+ t1_DropSegment@Base 5.1.0
-+ t1_DumpArea@Base 5.1.0
-+ t1_DumpEdges@Base 5.1.0
-+ t1_DumpSpace@Base 5.1.0
-+ t1_DumpText@Base 5.1.0
-+ t1_Dup@Base 5.1.0
-+ t1_EmptyRegion@Base 5.1.0
-+ t1_ErrorMsg@Base 5.1.0
-+ t1_FormatFP@Base 5.1.0
-+ t1_Free@Base 5.1.0
-+ t1_HeadSegment@Base 5.1.0
-+ t1_Hint@Base 5.1.0
-+ t1_ILoc@Base 5.1.0
-+ t1_Identity@Base 5.1.0
-+ t1_InitHints@Base 5.1.0
-+ t1_InitImager@Base 5.1.0
-+ t1_InitSpaces@Base 5.1.0
-+ t1_Interior@Base 5.1.0
-+ t1_Join@Base 5.1.0
-+ t1_JoinSegment@Base 5.1.0
-+ t1_KillPath@Base 5.1.0
-+ t1_KillRegion@Base 5.1.0
-+ t1_Line@Base 5.1.0
-+ t1_Loc@Base 5.1.0
-+ t1_MInvert@Base 5.1.0
-+ t1_MMultiply@Base 5.1.0
-+ t1_MoreWorkArea@Base 5.1.0
-+ t1_MoveEdges@Base 5.1.0
-+ t1_PathDelta@Base 5.1.0
-+ t1_PathSegment@Base 5.1.0
-+ t1_PathXform@Base 5.1.0
-+ t1_Permanent@Base 5.1.0
-+ t1_Phantom@Base 5.1.0
-+ t1_Pragmatics@Base 5.1.0
-+ t1_ProcessHint@Base 5.1.0
-+ t1_PseudoSpace@Base 5.1.0
-+ t1_QueryBounds@Base 5.1.0
-+ t1_QueryLoc@Base 5.1.0
-+ t1_QueryPath@Base 5.1.0
-+ t1_QuerySpace@Base 5.1.0
-+ t1_RegionBounds@Base 5.1.0
-+ t1_Reverse@Base 5.1.0
-+ t1_ReverseSubPaths@Base 5.1.0
-+ t1_Scale@Base 5.1.0
-+ t1_Snap@Base 5.1.0
-+ t1_SortSwath@Base 5.1.0
-+ t1_StepBezier@Base 5.1.0
-+ t1_StepLine@Base 5.1.0
-+ t1_SubLoc@Base 5.1.0
-+ t1_SwathUnion@Base 5.1.0
-+ t1_TermImager@Base 5.1.0
-+ t1_Transform@Base 5.1.0
-+ t1_TypeErr@Base 5.1.0
-+ t1_UnConvert@Base 5.1.0
-+ t1_UnJumble@Base 5.1.0
-+ t1_Unique@Base 5.1.0
-+ t1_User@Base 5.1.0
-+ t1_Xform@Base 5.1.0
-+ t1_abort@Base 5.1.0
-+ t1_get_abort_message@Base 5.1.0
-+ t1lib_log_file@Base 5.1.0
-+ t1lib_log_level@Base 5.1.0
-+ tokenLength@Base 5.1.0
-+ tokenMaxP@Base 5.1.0
-+ tokenStartP@Base 5.1.0
-+ tokenTooLong@Base 5.1.0
-+ tokenType@Base 5.1.0
-+ tokenValue@Base 5.1.0
-+ vm_alloc@Base 5.1.0
-+ vm_base@Base 5.1.0
-+ vm_free@Base 5.1.0
-+ vm_init@Base 5.1.0
-+ vm_init_amount@Base 5.1.0
-+ vm_init_count@Base 5.1.0
-+ vm_next@Base 5.1.0
-+ vm_size@Base 5.1.0
-+ vm_used@Base 5.1.0
-+ wsoffsetX@Base 5.1.0
-+ wsoffsetY@Base 5.1.0
-+ wsset@Base 5.1.0
-+ xiStub@Base 5.1.0
-+ xiTemporary@Base 5.1.0
-+libt1x.so.5 libt1-5 #MINVER#
-+ T1_AASetCharX@Base 5.1.1
-+ T1_AASetRectX@Base 5.1.1
-+ T1_AASetStringX@Base 5.1.1
-+ T1_ComputeAAColorsX@Base 5.1.1
-+ T1_LogicalPositionX@Base 5.1.1
-+ T1_SetCharX@Base 5.1.1
-+ T1_SetRectX@Base 5.1.1
-+ T1_SetStringX@Base 5.1.1
-+ T1_SetX11Params@Base 5.1.1
-+ T1_XImageFromGlyph@Base 5.1.1
---- t1lib-5.1.2.orig/debian/rules
-+++ t1lib-5.1.2/debian/rules
-@@ -0,0 +1,22 @@
-+#!/usr/bin/make -f
-+
-+include /usr/share/cdbs/1/rules/debhelper.mk
-+include /usr/share/cdbs/1/class/autotools.mk
-+include /usr/share/cdbs/1/rules/patchsys-quilt.mk
-+
-+export LDFLAGS := -Wl,--as-needed
-+
-+DEB_MAKE_BUILD_TARGET   := without_doc
-+DEB_MAKE_INSTALL_TARGET := install prefix=$(CURDIR)/debian/tmp/usr
-+DEB_INSTALL_DOCS_ALL    += debian/README.Debian
-+
-+binary-post-install/libt1-5 ::
-+	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
-+binary-post-install/libt1-5-dbg ::
-+	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
-+binary-post-install/libt1-dev ::
-+	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
-+binary-post-install/libt1-doc ::
-+	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
-+binary-post-install/t1lib-bin ::
-+	rm -rf debian/libt1-5-dbg/usr/lib/debug/usr/bin/
---- t1lib-5.1.2.orig/debian/compat
-+++ t1lib-5.1.2/debian/compat
-@@ -0,0 +1 @@
-+7
---- t1lib-5.1.2.orig/debian/t1lib-bin.postinst
-+++ t1lib-5.1.2/debian/t1lib-bin.postinst
-@@ -0,0 +1,8 @@
-+#!/bin/sh
-+set -e
-+
-+if [ ! -f /etc/t1lib/t1lib.config ]; then
-+    /usr/sbin/t1libconfig
-+fi
-+
-+#DEBHELPER#
---- t1lib-5.1.2.orig/debian/libt1-dev.install
-+++ t1lib-5.1.2/debian/libt1-dev.install
-@@ -0,0 +1,4 @@
-+debian/tmp/usr/include/*
-+debian/tmp/usr/lib/*.so
-+debian/tmp/usr/lib/*.la
-+debian/tmp/usr/lib/*.a
---- t1lib-5.1.2.orig/debian/changelog
-+++ t1lib-5.1.2/debian/changelog
-@@ -0,0 +1,414 @@
-+t1lib (5.1.2-3) unstable; urgency=low
-+
-+  * New Maintainer (Closes: #430611) 
-+  * Solved some hyphen-used-as-minus-sign in FontDatabase.5
-+  * Reformated debian/copyrigth
-+  * Added symbols control file 
-+
-+ -- Ruben Molina <rmolina@udea.edu.co>  Wed, 23 Jul 2008 20:24:22 -0500
-+
-+t1lib (5.1.2-2) unstable; urgency=low
-+
-+  * Add a package with debugging information.
-+
-+ -- Torsten Werner <twerner@debian.org>  Sat, 08 Mar 2008 10:21:43 +0100
-+
-+t1lib (5.1.2-1) unstable; urgency=low
-+
-+  * new upstream release
-+  * Correct debian/watch.
-+  * Remove patch cve-2007-4033.diff because it has been integrated upstream.
-+  * Remove parts of patch segfault.diff that have been integrated upstream.
-+  * Do not apply the remaining segfault.diff because it does not look safe but
-+    keep the patch as a reminder that something was broken in the past.
-+
-+ -- Torsten Werner <twerner@debian.org>  Sat, 08 Mar 2008 10:07:54 +0100
-+
-+t1lib (5.1.1-5) unstable; urgency=low
-+
-+  * Replace Build-Depends-Indep by Build-Depends again.
-+
-+ -- Torsten Werner <twerner@debian.org>  Tue, 08 Jan 2008 21:34:25 +0100
-+
-+t1lib (5.1.1-4) unstable; urgency=low
-+
-+  * Add Build-Depends-Indep: libxt-dev. (Closes: #459754)
-+
-+ -- Torsten Werner <twerner@debian.org>  Tue, 08 Jan 2008 20:29:01 +0100
-+
-+t1lib (5.1.1-3) unstable; urgency=low
-+
-+  * Replace static changes of upstream files by quilt patches as requested by
-+    Fedora developers.
-+  * Remove postinst that removed the old /usr/doc symlink.
-+  * Remove preinst that removed the old /usr/share/doc/t1lib-bin symlink.
-+  * Rename menu.t1lib-bin to t1lib-bin.menu to make sure the menu file gets
-+    installed.
-+  * Update menu file to conform to current menu policy.
-+  * Install documentation with dh_installdocs instead of dh_install and some
-+    other minor cleanups.
-+  * Switch to cdbs.
-+  * Fix versioned Build-Depends: debhelper (>= 5).
-+  * Move some Build-Depends to Build-Depends-Indep.
-+  * Apply two patches provided by Patrice Dumas:
-+    - Update t1libconfig's font search.
-+    - Fixes a segfault.
-+  * Integrate another patch that fixes a segfault. (Closes: #313236)
-+
-+ -- Torsten Werner <twerner@debian.org>  Sun, 06 Jan 2008 20:50:19 +0100
-+
-+t1lib (5.1.1-2) unstable; urgency=low
-+
-+  * Add Depends: libxaw7-dev to -dev package.
-+  * Switch to DH_COMPAT = 5.
-+  * Update Vcs headers in debian/control.
-+  * Change Standards-Version: 3.7.3.
-+  * Do not link with unneeded libraries.
-+  * Add LDFLAGS=-Wl,--as-needed.
-+
-+ -- Torsten Werner <twerner@debian.org>  Fri, 21 Dec 2007 22:54:43 +0100
-+
-+t1lib (5.1.1-1) unstable; urgency=low
-+
-+  * new upstream version (Closes: #418664)
-+  * Add XS-Vcs-* header to debian/control.
-+  * Update Standards-Version to 3.7.2 (no changes).
-+  * Remove Depends: libc6-dev. (Closes: #446375).
-+  * Change Maintainer to myself.
-+  * Replace ${Source-Version} by ${binary:Version}.
-+  * Do not ignore errors of 'make distclean'.
-+
-+ -- Torsten Werner <twerner@debian.org>  Sat, 13 Oct 2007 14:46:23 +0200
-+
-+t1lib (5.1.0-3) unstable; urgency=low
-+
-+  * Apply patch from Artur R. Czechowski to fix CVE-2007-4033.
-+    (Closes: #439927)
-+
-+ -- Torsten Werner <twerner@debian.org>  Mon, 17 Sep 2007 23:25:45 +0200
-+
-+t1lib (5.1.0-2) unstable; urgency=low
-+
-+  * Upload to unstable
-+  * Bump-up Standards-Version to 3.6.2 (no changes required)
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sat,  6 Aug 2005 20:11:51 +0200
-+
-+t1lib (5.1.0-1) experimental; urgency=low
-+
-+  * New upstream release
-+  * README.t1lib-5.0.2 replaced with README.t1lib-5.1.0
-+  * README.win32 is no longer installed
-+  * Removed misleading information from README.Debian
-+  * Replace -V with -V 'libt1-5 (>= 5.0.2)' for dh_makeshlibs in debian/rules
-+  * Remove some commented stuff from debian/rules
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sat,  4 Jun 2005 22:12:43 +0200
-+
-+t1lib (5.0.2-3) unstable; urgency=low
-+
-+  * Update libtool (Closes: #246753)
-+  * Build-Depends on individual library instead dummy xlibs-dev
-+  * Added dependencies to -dev package (Closes: #249973)
-+  * Thanks to Christopher L Cheney for above patches
-+  * Add -V to dh_makeshlibs to make a versioned dependencies on this library
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 23 May 2004 01:02:02 +0200
-+
-+t1lib (5.0.2-2) unstable; urgency=low
-+
-+  * change distribution to unstable
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Apr 2004 13:07:23 +0200
-+
-+t1lib (5.0.2-1) experimental; urgency=low
-+
-+  * New upstream release (Closes: #243916)
-+    - fixed some crashes (Closes: #242570, #243378)
-+  * Reference to README.t1lib-5.0.2 instead -5.0.0 in some debian/ files
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sat, 17 Apr 2004 19:22:09 +0200
-+
-+t1lib (5.0.0-5) unstable; urgency=low
-+
-+  * debian/rules: documentation is build from binary-indep (Closes: #230386)
-+  * debian/watch has been added
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sat, 21 Feb 2004 20:19:38 +0100
-+
-+t1lib (5.0.0-4) unstable; urgency=low
-+
-+  * Added missing files in NEWS.Debian
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Wed, 21 Jan 2004 00:27:24 +0100
-+
-+t1lib (5.0.0-3) unstable; urgency=low
-+
-+  * New release uploaded to unstable (finaly closes: #185097, #216501)
-+  * Unleash it to allow to migrate to testing (Closes: #221198)
-+  * libt1-dev and t1lib-dev conflict with each other,
-+  * libt1-dev conflicts with t1lib1-dev to smooth upgrade from t1lib 1.3.1-6
-+  * t1lib-bin provides/conflicts/replaces t1lib1-bin to smooth upgrade from
-+    t1lib 1.3.1-6
-+  * Some README.* files in libt1-dev
-+  * Applied patch which fixes memory access bug (see #224314 for details)
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun, 18 Jan 2004 03:00:05 +0100
-+
-+t1lib (5.0.0-2) experimental; urgency=low
-+
-+  * rename source package to t1lib
-+  * rename binary packages:
-+    + libt1-5 -> libt1-dev
-+    + t1lib5-bin -> t1lib-bin
-+    + libt1-5-doc -> libt1-doc
-+  * rationale for all above:
-+    http://lists.debian.org/debian-devel/2003/debian-devel-200311/msg01083.html
-+    and rest of this thread
-+  * linking libt1x with X libraries to avoid undefined symbols (see #220111)
-+  * clearing independency of X11 in README.Debian
-+  * removed all tracks of t1lib0 (Conflict, Replaces, etc)
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Wed, 24 Dec 2003 01:50:37 +0100
-+
-+t1lib5 (5.0.0-1) experimental; urgency=low
-+
-+  * New upstream release (Closes: #185097, #216501)
-+  * This release is binary incompatible with the previous one.
-+  * t1lib-bin and t1lib-dev are virtual packages now
-+  * removed weird ``dbl'' from configure - typo in upstream configure.in
-+  * there is no necessity to conflict current -doc with the other ones
-+  * library, devel and documentation package is libt1-5{,-dev,-doc} to be
-+    consistent with Debian Policy 8.1
-+  * do not anymore copy config.{sub,guess} automagically
-+  * update ac-tools/config.{sub,guess} to 20031007
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun,  9 Nov 2003 15:16:51 +0100
-+
-+t1lib (1.3.1-4) unstable; urgency=low
-+
-+  * New Maintainer, Adopted Package (Closes: #189694)
-+  * Prepare for migration to t1lib 5.x:
-+    - all packages renamed to t1lib1{,-foo}
-+    - empty packages t1lib-bin and t1lib-dev depending on t1lib1-bin
-+      and t1lib1-dev
-+  * Packaging from scratch using debhelper, Standards-Version is 3.6.1.0 now
-+  * Remove non-existent xlib6g-dev from Build-Depends
-+  * Updated README.Debian
-+  * Remove symlinks from /usr/doc/t1lib*
-+  * Only t1lib1-bin contains /etc/t1lib directory
-+  * t1lib-dev has been split into two packages: t1lib1-dev and t1lib1-doc
-+  * t1lib1-bin: change manual section for type1afm from 8 to 1
-+  * t1lib1-bin: create files in /etc/t1lib if don't exist (Closes: #58275)
-+  * t1lib1-bin: remove symlink /usr/share/doc/t1lib-bin -> t1lib1 if exists
-+  * Torsten Werner <twerner@debian.org> is sponsoring the package
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>  Sun,  2 Nov 2003 03:47:51 +0100
-+
-+t1lib (1.3.1-3) unstable; urgency=low
-+
-+  * Change t1lib-dev's section from "devel" to "libdevel" (thanks, Katie!)
-+
-+ -- Adam Conrad <adconrad@0c3.net>  Mon, 18 Aug 2003 22:42:17 -0600
-+
-+t1lib (1.3.1-2) unstable; urgency=low
-+
-+  * Set maintainer to QA, as this package was orphaned months ago (see #189694)
-+  * Change "make" to "make without_doc" and remove build-dep on
-+    tetex-bin (closes: #192291, #192290)
-+  * Change libxaw-dev build-dep to libxaw7-dev, so we are asking for a real
-+    package, rather than a virtual (closes: #170012)
-+  * lib/Makefile.in changes (closes: #193757)
-+    - add "-lm" to libt1.la target
-+    - add "-L@top_srcdir@/lib/.libs/ -lt1" to libt1x.la target
-+
-+ -- Adam Conrad <adconrad@0c3.net>  Mon, 18 Aug 2003 21:50:22 -0600
-+
-+t1lib (1.3.1-1) unstable; urgency=low
-+
-+  * New upstream version.  (Closes: #127619,#127618)
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Thu,  3 Jan 2002 21:53:29 -0500
-+
-+t1lib (1.2-1) unstable; urgency=low
-+
-+  * New upstream version.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Wed, 22 Aug 2001 21:16:36 -0400
-+
-+t1lib (1.1.1-2.2) unstable; urgency=low
-+
-+  * NMU
-+  * debian/rules: if LD_LIBRARY_PATH is already set, append to it, so
-+    builds under fakeroot will work (Closes: #104046)
-+
-+ -- Branden Robinson <branden@debian.org>  Fri, 10 Aug 2001 04:57:50 -0500
-+
-+t1lib (1.1.1-2.1) unstable; urgency=low
-+
-+  * NMU, with updated config.{guess,sub} for newer architectures
-+
-+ -- Randolph Chung <tausq@debian.org>  Sat,  7 Jul 2001 01:01:51 -0600
-+
-+t1lib (1.1.1-2) unstable; urgency=high
-+
-+  * Yow!  Major upstream weirdness.  Do *not* try to print the documentation
-+    when building...  Closes: #94660
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri, 20 Apr 2001 20:35:49 -0400
-+
-+t1lib (1.1.1-1) unstable; urgency=low
-+
-+  * New upstream version.  Closes: #94627 (why did I never get this bug
-+    report in the first place?)
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri, 20 Apr 2001 11:16:15 -0400
-+
-+t1lib (1.0.1-2) unstable; urgency=low
-+
-+  * Recompile with new XFree86 libraries and glibc.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Wed, 24 Jan 2001 22:33:43 -0500
-+
-+t1lib (1.0.1-1) unstable; urgency=low
-+
-+  * New upstream version.  Closes: #69689
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Thu,  9 Nov 2000 00:29:06 -0500
-+
-+t1lib (1.0-2) frozen unstable; urgency=low
-+
-+  * Use dpkg-architecture to supply a target architecture name to
-+    configure, should fix the compile problems on Alpha and ARM for good.
-+    (closes:#57839)
-+
-+ -- David Huggins-Daines <dhd@eradicator.org>  Wed,  1 Mar 2000 21:22:49 -0500
-+
-+t1lib (1.0-1) unstable; urgency=low
-+
-+  * New upstream version.
-+  * Twiddled package names to make more sense.
-+  * Move back to priority optional to satisfy dependencies of xpdf and
-+    php3.
-+  * Moved .la files to t1lib-dev.  Added versioned Replaces: field in the
-+    control file to cope with potato-to-potato upgrades (the t1lib0
-+    packages in slink were not buggy in this way)
-+  * t1libconfig and associated manual pages (FontDataBase.5,
-+    t1libconfig.8) are now in the t1lib-bin package, for much the same
-+    reason.  Unfortunately this Replaces: field cannot be versioned.
-+  * The t1lib packages no longer manage the contents of /etc/t1lib/.  In
-+    the near future, t1lib1 may have a debconf interface for doing so.
-+    The t1lib.config and FontDataBase were never used by any programs that
-+    linked with t1lib anyway, thankfully.
-+
-+ -- David Huggins-Daines <dhd@eradicator.org>  Sun,  2 Jan 2000 03:02:30 -0500
-+
-+t1lib0 (0.9.2-1) unstable; urgency=low
-+
-+  * New upstream version.
-+  * Being more intelligent in t1libconfig to avoid postinst-lossage.
-+    Fixes: #44095
-+  * Updated for FHS compliance.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri,  8 Oct 1999 15:27:46 -0400
-+
-+t1lib0 (0.9.1-4) unstable; urgency=medium
-+
-+  * Updated the shlibs file since it appears that programs compiled
-+    against 0.9.1 won't work with 0.9 (though the other way around does
-+    work).  Fixes: #43215, #43231
-+  * Removed ARCH bogosity and updated config.sub and config.guess
-+    (upstream maintainer will be notified)
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Sat, 21 Aug 1999 01:23:39 -0400
-+
-+t1lib0 (0.9.1-3) unstable; urgency=low
-+
-+  * Conditionalize that ARCH thing, or the Hurd people will kill me.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Sat,  3 Jul 1999 13:56:12 -0400
-+
-+t1lib0 (0.9.1-2) unstable; urgency=low
-+
-+  * Oops.  T1lib installs a dummy config file.  We remove this before
-+    building the package (because we generate our own).  Also, the preinst
-+    has to compensate for the past brokenness by saving it before an
-+    upgrade.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri,  2 Jul 1999 16:13:46 -0400
-+
-+t1lib0 (0.9.1-1) unstable; urgency=low
-+
-+  * New upstream version.
-+  * Moved back to extra, because that's the way the winds are blowing.
-+  * Added ARCH variable to debian/rules to work around strange
-+    architecture detection on Alpha.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri,  2 Jul 1999 14:58:32 -0400
-+
-+t1lib0 (0.9-1) unstable; urgency=low
-+
-+  * New upstream version
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Thu, 10 Jun 1999 23:00:12 -0400
-+
-+t1lib0 (0.8.1-1) unstable; urgency=low
-+
-+  * New upstream version.  (fixes bug #31549)
-+  * Upstream move to libtool has made debian/rules a lot less contorted,
-+    and slimmed up the diff considerably.  Thanks!
-+  * I'm now uploading m68k versions as well.
-+  * Fixed "confdif" typo in t1libconfig (oops!)
-+  * This release breaks binary and source compatibility.  Bumping the
-+    soname seems a bit extreme, since there is only one Debian package
-+    (gglyph) which depends on this, and I'm simultaneously uploading a
-+    fixed version.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Wed, 24 Feb 1999 17:16:41 -0500
-+
-+t1lib0 (0.7.1-5) unstable; urgency=low
-+
-+  * Changed debian/rules to remove debian/files on clean. (fixes bug #26907)
-+  * Changed t1libconfig to allow installation </dev/null (fixes bug #27609)
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri, 16 Oct 1998 20:12:02 -0400
-+
-+t1lib0 (0.7.1-4) unstable; urgency=low
-+
-+  * Changed debian/rules not to use debhelper, to fix PowerPC and Alpha compile
-+    problems and (hopefully) make the purists happy :)
-+  * Upgraded priority to Optional, since it doesn't conflict with or break
-+    anything, and is relatively stable.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri, 18 Sep 1998 18:36:07 -0400
-+
-+t1lib0 (0.7.1-3) unstable; urgency=low
-+
-+  * Changed "read" to "read foo" in t1libconfig to make it more sh-friendly.
-+  * Minor change to debian/rules (fixes bug #25501)
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Fri,  7 Aug 1998 13:31:28 -0400
-+
-+t1lib0 (0.7.1-2) unstable; urgency=low
-+
-+  * Patched lib/t1lib/t1finfo.c to fix segfault problems with some fonts.
-+  * Fixed the URLs and info in copyright and README.Debian.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Tue, 21 Jul 1998 16:01:03 -0400
-+
-+t1lib0 (0.7.1-1) unstable; urgency=low
-+
-+  * Initial release.
-+
-+ -- David Huggins-Daines <dhd@debian.org>  Thu, 16 Jul 1998 22:07:08 -0400 
-+
-+
---- t1lib-5.1.2.orig/debian/copyright
-+++ t1lib-5.1.2/debian/copyright
-@@ -0,0 +1,94 @@
-+This package was debianized by David Huggins-Daines <dhd@debian.org> on
-+Fri, 19 Jun 1998 20:01:01 -0400.  It has been also maintained by Artur 
-+R. Czechowski <arturcz@hell.pl> and Torsten Werner <twerner@debian.org>.
-+
-+It was downloaded from ftp://sunsite.unc.edu/pub/Linux/libs/graphics/
-+
-+Upstream Author:
-+
-+    Rainer Menzner <Rainer.Menzner@web.de>
-+
-+Copyright:
-+
-+    Copyright (C) 1996-2003 Rainer Menzner
-+
-+License:
-+
-+    This package is free software; you can redistribute it and/or
-+    modify it under the terms of the GNU Lesser General Public
-+    License as published by the Free Software Foundation; either
-+    version 2 of the License, or (at your option) any later version.
-+
-+    This package is distributed in the hope that it will be useful,
-+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+    Lesser General Public License for more details.
-+
-+    You should have received a copy of the GNU Lesser General Public
-+    License along with this package; if not, write to the Free Software
-+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-+
-+On Debian systems, the complete text of the GNU Lesser General
-+Public License can be found in `/usr/share/common-licenses/LGPL'.
-+
-+The Debian packaging is (C) 2008, Ruben Molina <rmolina@udea.edu.co> and
-+is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
-+
-+Please note that there are parts of t1lib that are subject to other licenses:
-+- The parseAFM-package is copyrighted by Adobe Systems Inc.
-+- The type1 rasterizer is copyrighted by IBM and the X11-consortium.
-+
-+(from lib/t1lib/parseAFM.c)
-+/*
-+ * (C) 1988, 1989, 1990 by Adobe Systems Incorporated. All rights reserved.
-+ *
-+ * This file may be freely copied and redistributed as long as:
-+ *   1) This entire notice continues to be included in the file, 
-+ *   2) If the file has been modified in any way, a notice of such
-+ *      modification is conspicuously indicated.
-+ *
-+ * PostScript, Display PostScript, and Adobe are registered trademarks of
-+ * Adobe Systems Incorporated.
-+ * 
-+ * ************************************************************************
-+ * THE INFORMATION BELOW IS FURNISHED AS IS, IS SUBJECT TO CHANGE WITHOUT
-+ * NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ADOBE SYSTEMS
-+ * INCORPORATED. ADOBE SYSTEMS INCORPORATED ASSUMES NO RESPONSIBILITY OR 
-+ * LIABILITY FOR ANY ERRORS OR INACCURACIES, MAKES NO WARRANTY OF ANY 
-+ * KIND (EXPRESS, IMPLIED OR STATUTORY) WITH RESPECT TO THIS INFORMATION, 
-+ * AND EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES OF MERCHANTABILITY, 
-+ * FITNESS FOR PARTICULAR PURPOSES AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
-+ * ************************************************************************
-+ */
-+
-+(from lib/type1/type1.c)
-+/* $XConsortium: type1.c,v 1.5 91/10/10 11:20:06 rws Exp $ */
-+/* Copyright International Business Machines, Corp. 1991
-+ * All Rights Reserved
-+ * Copyright Lexmark International, Inc. 1991
-+ * All Rights Reserved
-+ * Portions Copyright (c) 1990 Adobe Systems Incorporated.
-+ * All Rights Reserved
-+ *
-+ * License to use, copy, modify, and distribute this software and its
-+ * documentation for any purpose and without fee is hereby granted,
-+ * provided that the above copyright notice appear in all copies and that
-+ * both that copyright notice and this permission notice appear in
-+ * supporting documentation, and that the name of IBM or Lexmark or Adobe
-+ * not be used in advertising or publicity pertaining to distribution of
-+ * the software without specific, written prior permission.
-+ *
-+ * IBM, LEXMARK, AND ADOBE PROVIDE THIS SOFTWARE "AS IS", WITHOUT ANY
-+ * WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
-+ * LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-+ * PARTICULAR PURPOSE, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.  THE
-+ * ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE, INCLUDING
-+ * ANY DUTY TO SUPPORT OR MAINTAIN, BELONGS TO THE LICENSEE.  SHOULD ANY
-+ * PORTION OF THE SOFTWARE PROVE DEFECTIVE, THE LICENSEE (NOT IBM,
-+ * LEXMARK, OR ADOBE) ASSUMES THE ENTIRE COST OF ALL SERVICING, REPAIR AND
-+ * CORRECTION.  IN NO EVENT SHALL IBM, LEXMARK, OR ADOBE BE LIABLE FOR ANY
-+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
-+ * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
-+ * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
---- t1lib-5.1.2.orig/debian/t1lib-bin.menu
-+++ t1lib-5.1.2/debian/t1lib-bin.menu
-@@ -0,0 +1,2 @@
-+?package(t1lib-bin): needs="X11" section="Applications/Viewers" \
-+  title="XGlyph" command="/usr/bin/xglyph"
---- t1lib-5.1.2.orig/debian/watch
-+++ t1lib-5.1.2/debian/watch
-@@ -0,0 +1,3 @@
-+version=3
-+ftp://sunsite.unc.edu/pub/Linux/libs/graphics/t1lib-(.*)\.tar\.gz \
-+  debian debian/orig-tar.sh
---- t1lib-5.1.2.orig/debian/libt1-5.docs
-+++ t1lib-5.1.2/debian/libt1-5.docs
-@@ -0,0 +1,2 @@
-+README.t1lib-*
-+README.t1python
---- t1lib-5.1.2.orig/debian/t1lib-bin.install
-+++ t1lib-5.1.2/debian/t1lib-bin.install
-@@ -0,0 +1,2 @@
-+debian/t1libconfig usr/sbin
-+debian/tmp/usr/bin/*
---- t1lib-5.1.2.orig/debian/README.Debian
-+++ t1lib-5.1.2/debian/README.Debian
-@@ -0,0 +1,25 @@
-+t1lib for Debian
-+----------------
-+
-+This package has been created from scratch using debhelper. It contains
-+four binary packages:
-+ * shared library - libt1-5
-+ * development files - libt1-5-dev
-+ * font-related binary utils - t1lib5-bin
-+ * documentation - libt1-5-doc
-+
-+However you can read in upstream's README that t1lib is completely independent
-+of X11, you should know that package provides also libt1x library which
-+contains X11 pixmap support. That's why it requires a bunch of X-libraries
-+installed. If you consider this as a bad behavior, please discuss it on
-+debian-devel list.
-+
-+NOTE: The old 't1lib0' package will *remove* /etc/t1lib/ and its
-+contents if you purge it. Since this package is now obsolete, there
-+is no good solution for this; you must back up your font database and
-+config file if you wish to preserve them. Sorry...
-+
-+This package has been previously maintained by David Huggins-Daines, great
-+thanks to him for his good job.
-+
-+ -- Artur R. Czechowski <arturcz@hell.pl>, Tue, 11 Nov 2003 13:31:48 +0100
---- t1lib-5.1.2.orig/debian/orig-tar.sh
-+++ t1lib-5.1.2/debian/orig-tar.sh
-@@ -0,0 +1,11 @@
-+#!/bin/sh -e
-+
-+# called by uscan with '--upstream-version' <version> <file>
-+
-+# move to directory 'tarballs'
-+if [ -r .svn/deb-layout ]; then
-+  . .svn/deb-layout
-+  mv $3 $origDir
-+  echo "moved $3 to $origDir"
-+fi
-+
---- t1lib-5.1.2.orig/debian/patches/series
-+++ t1lib-5.1.2/debian/patches/series
-@@ -0,0 +1,4 @@
-+no-docs.diff
-+no-config.diff
-+lib-cleanup.diff
-+#segfault.diff
---- t1lib-5.1.2.orig/debian/patches/no-config.diff
-+++ t1lib-5.1.2/debian/patches/no-config.diff
-@@ -0,0 +1,57 @@
-+do not install a static configuration file
-+
-+Index: t1lib-5.1.1/lib/Makefile.in
-+===================================================================
-+--- t1lib-5.1.1.orig/lib/Makefile.in	2008-01-05 19:13:57.000000000 +0100
-++++ t1lib-5.1.1/lib/Makefile.in	2008-01-05 19:14:18.000000000 +0100
-+@@ -161,17 +161,17 @@
-+ install: dummy
-+ 	$(MKINSTALLDIRS) $(DESTDIR)$(libdir)
-+ 	$(MKINSTALLDIRS) $(DESTDIR)$(includedir)
-+-	$(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@
-++#	$(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@
-+ 	$(LIBTOOL) --mode=install \
-+ 		$(INSTALL_DATA) $(MAIN_TARGET) $(DESTDIR)$(libdir)
-+ 	$(LIBTOOL) --mode=install \
-+ 		$(INSTALL_DATA) $(MAIN_HEADER) $(DESTDIR)$(includedir)
-+-	if (test -f $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config) \
-+-	then \
-+-	  echo "Alert: Global configuration file exists, installation skipped!"; \
-+-	else \
-+-	  $(LIBTOOL) --mode=install $(INSTALL_DATA) t1lib.config $(DESTDIR)@T1LIB_DATA_DIR@; \
-+-	fi;
-++#	if (test -f $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config) \
-++#	then \
-++#	  echo "Alert: Global configuration file exists, installation skipped!"; \
-++#	else \
-++#	  $(LIBTOOL) --mode=install $(INSTALL_DATA) t1lib.config $(DESTDIR)@T1LIB_DATA_DIR@; \
-++#	fi;
-+ 
-+ 
-+ uninstall: dummy
-+@@ -179,7 +179,7 @@
-+ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(libdir)/libt1x.la
-+ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(includedir)/t1lib.h
-+ 	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(includedir)/t1libx.h
-+-	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config
-++#	-$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)@T1LIB_DATA_DIR@/t1lib.config
-+ 
-+ 
-+ dummy:
-+Index: t1lib-5.1.1/xglyph/xglyph.c
-+===================================================================
-+--- t1lib-5.1.1.orig/xglyph/xglyph.c	2008-01-05 19:16:30.000000000 +0100
-++++ t1lib-5.1.1/xglyph/xglyph.c	2008-01-05 19:16:40.000000000 +0100
-+@@ -526,9 +526,12 @@
-+   
-+   /* Check for environment entry. If not set, set it to current
-+      directory so that configuration file is found there */
-++  /* It violates the Debian Policy */
-++#if 0
-+   if (getenv("T1LIB_CONFIG")==NULL){
-+     putenv( "T1LIB_CONFIG=./t1lib.config");
-+   }
-++#endif
-+ 
-+   
-+   /* Set log-level: */
---- t1lib-5.1.2.orig/debian/patches/lib-cleanup.diff
-+++ t1lib-5.1.2/debian/patches/lib-cleanup.diff
-@@ -0,0 +1,59 @@
-+do not link against libraries that are not needed
-+
-+Index: t1lib-5.1.1/lib/Makefile.in
-+===================================================================
-+--- t1lib-5.1.1.orig/lib/Makefile.in	2008-01-05 19:17:21.000000000 +0100
-++++ t1lib-5.1.1/lib/Makefile.in	2008-01-05 19:17:38.000000000 +0100
-+@@ -24,7 +24,7 @@
-+ X_LIBS    = @X_LIBS@
-+ TOPSRC    = @top_srcdir@
-+ XPM_LIB   = -lXpm
-+-XLIB      = @X_PRE_LIBS@ -lXext -lX11 @X_EXTRA_LIBS@
-++XLIB      = -lX11
-+ LDFLAGS   = @LDFLAGS@
-+ LDLIBS    = @LDLIBS@
-+ AR        = ar rc
-+@@ -137,7 +137,7 @@
-+ 	$(LIBTOOL) --mode=link \
-+ 		$(CC) $(LDFLAGS) -o $@ $(T1LIBX_OBJS) \
-+ 	         -version-info @T1LIB_LT_CURRENT@:@T1LIB_LT_REVISION@:@T1LIB_LT_AGE@ \
-+-	         libt1.la $(X_LIBS) $(XPM_LIB) $(XLIB)  -no-undefined -rpath $(libdir) 
-++	         libt1.la $(X_LIBS) $(XLIB)  -no-undefined -rpath $(libdir) 
-+ 	cp t1lib/t1libx.h .
-+ 
-+ 
-+Index: t1lib-5.1.1/type1afm/Makefile.in
-+===================================================================
-+--- t1lib-5.1.1.orig/type1afm/Makefile.in	2008-01-05 19:17:52.000000000 +0100
-++++ t1lib-5.1.1/type1afm/Makefile.in	2008-01-05 19:18:02.000000000 +0100
-+@@ -70,7 +70,7 @@
-+ 
-+ type1afm: $(OBJS) ../lib/t1lib.h
-+ 	$(LIBTOOL) --mode=link \
-+-		$(CC) -o type1afm $(LDFLAGS) $(OBJS) $(T1LIB) $(LDLIBS)
-++		$(CC) -o type1afm $(LDFLAGS) $(OBJS) $(T1LIB)
-+ 
-+ .SUFFIXES: .lo
-+ .c.lo:
-+Index: t1lib-5.1.1/xglyph/Makefile.in
-+===================================================================
-+--- t1lib-5.1.1.orig/xglyph/Makefile.in	2008-01-05 19:18:15.000000000 +0100
-++++ t1lib-5.1.1/xglyph/Makefile.in	2008-01-05 19:18:31.000000000 +0100
-+@@ -24,7 +24,7 @@
-+ X_LIBS    = @X_LIBS@
-+ TOPSRC    = @top_srcdir@
-+ XPM_LIB   = -lXpm
-+-XLIB      = @X_PRE_LIBS@ -lXext -lX11 @X_EXTRA_LIBS@
-++XLIB      = -lX11 @X_EXTRA_LIBS@
-+ LDFLAGS   = @LDFLAGS@
-+ LDLIBS    = @LDLIBS@ 
-+ AR        = ar rc
-+@@ -65,7 +65,7 @@
-+ 
-+ T1LIB  = ../lib/libt1.la
-+ T1LIBX = ../lib/libt1x.la
-+-XAWLIB = -lXaw -lXt -lXmu
-++XAWLIB = -lXaw -lXt
-+ 
-+ 
-+ all: xglyph
---- t1lib-5.1.2.orig/debian/patches/no-docs.diff
-+++ t1lib-5.1.2/debian/patches/no-docs.diff
-@@ -0,0 +1,34 @@
-+We are using debhelper to install the documentation in the correct
-+directory.
-+
-+Index: t1lib-5.1.1/doc/Makefile.in
-+===================================================================
-+--- t1lib-5.1.1.orig/doc/Makefile.in	2008-01-05 19:05:03.000000000 +0100
-++++ t1lib-5.1.1/doc/Makefile.in	2008-01-05 19:05:25.000000000 +0100
-+@@ -89,16 +89,16 @@
-+ 
-+ 
-+ install: dummy
-+-	if (test -f t1lib_doc.ps) \
-+-	then \
-+-	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-+-	  $(INSTALL_DATA) t1lib_doc.ps $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-+-	fi;
-+-	if (test -f t1lib_doc.pdf) \
-+-	then \
-+-	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-+-	  $(INSTALL_DATA) t1lib_doc.pdf $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-+-	fi;
-++#	if (test -f t1lib_doc.ps) \
-++#	then \
-++#	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-++#	  $(INSTALL_DATA) t1lib_doc.ps $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-++#	fi;
-++#	if (test -f t1lib_doc.pdf) \
-++#	then \
-++#	  $(MKINSTALLDIRS) $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-++#	  $(INSTALL_DATA) t1lib_doc.pdf $(DESTDIR)@T1LIB_DATA_DIR@/doc; \
-++#	fi;
-+ 
-+ 
-+ uninstall: dummy
---- t1lib-5.1.2.orig/debian/patches/segfault.diff
-+++ t1lib-5.1.2/debian/patches/segfault.diff
-@@ -0,0 +1,62 @@
-+This patch does not look safe and it has not been accepted upstream.
-+Index: t1lib-5.1.1/lib/t1lib/t1base.c
-+===================================================================
-+--- t1lib-5.1.1.orig/lib/t1lib/t1base.c	2005-05-18 05:08:01.000000000 +0200
-++++ t1lib-5.1.1/lib/t1lib/t1base.c	2008-01-06 20:48:32.000000000 +0100
-+@@ -455,7 +455,7 @@
-+ 	   to test_for_t1_file() filename is substituted by an emty
-+ 	   string if the file was not found: */
-+ 	sprintf( err_warn_msg_buf, "Type 1 Font file %s.[pfa/pfb] not found (FontID=%d, SearchPath=%s)",
-+-		 linebuf, m-1, T1_GetFileSearchPath(T1_PFAB_PATH));
-++		 linebuf, m-1, intT1_GetFileSearchPath(T1_PFAB_PATH));
-+ 	if ((test_for_t1_file( &linebuf[0]))){
-+ 	  T1_PrintLog( "intT1_scanFontDBase()", err_warn_msg_buf, T1LOG_WARNING);
-+ 	  located=0;
-+@@ -579,7 +579,7 @@
-+ 	   to test_for_t1_file() filename is substituted by an emty
-+ 	   string if the file was not found: */
-+ 	sprintf( err_warn_msg_buf, "Type 1 Font file %s.[pfa/pfb] not found (FontID=%d, SearchPath=%s)",
-+-		 linebuf, m-1, T1_GetFileSearchPath(T1_PFAB_PATH));
-++		 linebuf, m-1, intT1_GetFileSearchPath(T1_PFAB_PATH));
-+ 	if ((test_for_t1_file( &linebuf[0]))){
-+ 	  T1_PrintLog( "intT1_scanFontDBase()", err_warn_msg_buf, T1LOG_WARNING);
-+ 	  located=0;
-+Index: t1lib-5.1.1/lib/t1lib/t1env.c
-+===================================================================
-+--- t1lib-5.1.1.orig/lib/t1lib/t1env.c	2008-01-06 20:48:32.000000000 +0100
-++++ t1lib-5.1.1/lib/t1lib/t1env.c	2008-01-06 20:48:32.000000000 +0100
-+@@ -807,6 +807,14 @@
-+ 
-+ }
-+ 
-++/* intT1_GetFileSearchPath(): 
-++ call T1_GetFileSearchPath and truncate the line to avoid overflowing
-++ error buffers*/ 
-++char *intT1_GetFileSearchPath( int type)
-++{
-++   char  *res = T1_GetFileSearchPath(type);
-++   res[900] = 0;
-++}
-+ 
-+ /* T1_AddToFileSearchPath(): Add the specified path element to
-+    the specified search path. If the existing path is the default path,
-+Index: t1lib-5.1.1/lib/t1lib/t1env.h
-+===================================================================
-+--- t1lib-5.1.1.orig/lib/t1lib/t1env.h	2005-05-16 20:37:43.000000000 +0200
-++++ t1lib-5.1.1/lib/t1lib/t1env.h	2008-01-06 20:48:32.000000000 +0100
-+@@ -35,6 +35,7 @@
-+ int T1_SetFileSearchPath( int type, char *pathname);
-+ int T1_AddToFileSearchPath( int pathtype, int mode, char *pathname);
-+ char *T1_GetFileSearchPath( int type);
-++char *intT1_GetFileSearchPath( int type);
-+ int T1_SetFontDataBase( char *filename);
-+ int T1_AddFontDataBase( int mode, char *filename);
-+ int T1_SetFontDataBaseXLFD( char *filename);
-+@@ -49,6 +50,7 @@
-+ extern int T1_SetFileSearchPath( int type, char *pathname);
-+ extern int T1_AddToFileSearchPath( int pathtype, int mode, char *pathname);
-+ extern char *T1_GetFileSearchPath( int type);
-++extern char *intT1_GetFileSearchPath( int type);
-+ extern int T1_SetFontDataBase( char *filename);
-+ extern int T1_AddFontDataBase( int mode, char *filename);
-+ extern int T1_SetFontDataBaseXLFD( char *filename);
---- t1lib-5.1.2.orig/debian/man/type1afm.1
-+++ t1lib-5.1.2/debian/man/type1afm.1
-@@ -0,0 +1,34 @@
-+.TH TYPE1AFM 1
-+.SH NAME
-+.B type1afm
-+\- create a font metrics file from a Type 1 font file
-+.SH SYNOPSIS
-+.B type1afm
-+[
-+.BR \-l
-+]
-+.B fontfile
-+[
-+.B fontfile...
-+]
-+.SH DESCRIPTION
-+This manual page was written for the Debian GNU/Linux distribution
-+because the original program does not have a manual page.
-+.PP
-+.B type1afm
-+reads in Type 1 font files specified on the command line, rasterizes
-+them to 1000bp, and writes AFM (font metrics) files based on the
-+observed metrics information.
-+.PP
-+The AFM file is created in the same directory as the font file, so be
-+sure that you have write access there before running this program.
-+.SH OPTIONS
-+.TP
-+.BR \-l
-+Write a log file
-+.SH SEE ALSO
-+.BR getafm (1)
-+.SH AUTHOR
-+This manual page was David Huggins-Daines <dhd@debian.org>
-+for the Debian GNU/Linux distribution (but may be used by others)
-+
---- t1lib-5.1.2.orig/debian/man/t1libconfig.8
-+++ t1lib-5.1.2/debian/man/t1libconfig.8
-@@ -0,0 +1,57 @@
-+.TH T1LIBCONFIG 8
-+.SH NAME
-+.B t1libconfig
-+\- create the t1lib.config and FontDataBase files for t1lib
-+.SH SYNOPSIS
-+.B t1libconfig
-+[
-+.BR \-v\fP, \fB\-\-version
-+]
-+[
-+.BR \-h\fP, \fB\-\-help
-+]
-+.B \-\-force
-+]
-+[
-+.B fontdirectory...
-+]
-+.SH DESCRIPTION
-+.B t1libconfig
-+scans a list of directories for Type 1 fonts and font metric files,
-+and generates a configuration file and font database file for the
-+.B t1lib
-+rasterizer library accordingly.  By default, it looks in all
-+subdirectories of /usr/X11R6/lib/X11/fonts, and in
-+/usr/lib/ghostscript.  Extra directories to search may be specified on 
-+the command line.  The
-+.B t1libconfig
-+script tries not to scan the same directory twice (this is, however,
-+not foolproof, since /usr/X11R6/lib/X11/fonts and /usr/lib/X11/fonts
-+typically point to the same directory on GNU/Linux systems).
-+.SH OPTIONS
-+.TP
-+.BR \-v\fP, \fB\-\-version
-+Print the version of
-+.B t1libconfig
-+and exit.
-+.TP
-+.BR \-h\fP, \fB\-\-help
-+Print help about usage and exit.
-+.TP
-+.B \-\-force
-+Force the generation of new configuration files even if these files
-+already exist on the system.
-+.SH FILES
-+.TP 25
-+.B /etc/t1lib/t1lib.config
-+Contains configuration information for t1lib, including
-+colon-separated lists of paths to Type 1 font files and font metrics
-+files, and the location of the default font database file
-+.TP 25
-+.B /etc/t1lib/FontDataBase
-+Contains a list of the names of Type 1 font files to be used by t1lib.
-+.SH AUTHOR
-+David Huggins-Daines <dhd@debian.org>
-+.SH SEE ALSO
-+.BR FontDataBase (5)
-+
---- t1lib-5.1.2.orig/debian/man/xglyph.1
-+++ t1lib-5.1.2/debian/man/xglyph.1
-@@ -0,0 +1,111 @@
-+.TH XGLYPH 1
-+.SH NAME
-+xglyph \- demonstration program for the t1lib font rasterizer library.
-+.SH SYNOPSIS
-+.B xglyph
-+[
-+.B fontfile...
-+]
-+.SH "DESCRIPTION"
-+This manual page documents briefly the
-+.BR xglyph
-+program.
-+This manual page was written for the Debian GNU/Linux distribution
-+because the original program does not have a manual page.
-+.PP
-+.B xglyph
-+is a program which demonstrates the capabilities of the
-+.B t1lib
-+library.  It allows the user to view an arbitrary character or string
-+rendered in the various ways pgossible with the library.  By default,
-+it writes a log file named \fIt1lib.log\fR in the current directory.
-+.PP
-+If invoked with no arguments, it will attempt to read the global
-+configuration file and font database.  It will also accept any number
-+of filenames on the command line, in which case these are treated as
-+font files to be loaded instead of the default font database.
-+.SH "OPTIONS"
-+.TP
-+.BR \-\-help
-+Shows a brief help text
-+.TP
-+.BR \-\-Help
-+Shows a description of all options
-+.TP
-+.BR \-\-noGrid 
-+Don't draw grid lines when displaying glyphs
-+.TP
-+.BR \-\-setPad 
-+Set bitmap padding
-+.TP
-+.BR \-\-logError
-+Log errors only
-+.TP
-+.BR \-\-logWarning
-+Log errors and warnings
-+.TP
-+.BR \-\-logStatistic
-+Log errors, warnings, and statistics
-+.TP
-+.BR \-\-logDebug
-+Log just about everything
-+.TP
-+.BR \-\-ignoreForceBold
-+Don't make pseudo-boldface glyphs
-+.TP
-+.BR \-\-ignoreFamilyAlignment
-+.TP
-+.BR \-\-ignoreHinting
-+Ignore hints when scaling glyphs
-+.TP
-+.BR \-\-debugLine
-+Show debugging info for line-drawing
-+operations in the rasterizer
-+.TP
-+.BR \-\-debugRegion
-+Show debugging info for region operations in
-+the rasterizer
-+.TP
-+.BR \-\-debugPath
-+Show debugging info for path operations in the
-+rasterizer
-+.TP
-+.BR \-\-debugFont
-+.TP
-+.BR \-\-debugHint
-+Show debugging info for hinting in the rasterizer.
-+.TP
-+.BR \-\-checkPerformance
-+Do some simple performance tests while rasterizing.
-+.TP
-+.BR \-\-checkCopyFont
-+Check that copying fonts works.
-+.TP
-+.BR \-\-checkConcatGlyphs
-+Check that concatenating glyphs works.
-+.TP
-+.BR \-\-checkBadCharHandling
-+.TP
-+.BR \-\-checkDefaultEncoding
-+Set a default encoding vector.
-+.SH "ENVIRONMENT"
-+In the Debian GNU/Linux version of this program, the environment
-+variable
-+.B T1LIB_CONFIG,
-+if set, points to an alternate configuration
-+file with which to initialize the library.
-+.SH "SEE ALSO"
-+.BR FontDataBase (5),
-+.BR t1libconfig (8).
-+.PP
-+.B xglyph
-+is much more fully documented in the LaTeX documentation that
-+accompanies the upstream
-+.B t1lib
-+distribution.  This documentation is installed in PostScript and source
-+formats with the t1lib-dev package in /usr/share/doc/t1lib-dev, and is
-+also accessible through the dwww system.
-+.SH AUTHOR
-+This manual page was written by David Huggins-Daines
-+<dhd@debian.org>, for the Debian GNU/Linux system (but may
-+be used by others).
---- t1lib-5.1.2.orig/debian/man/FontDatabase.5
-+++ t1lib-5.1.2/debian/man/FontDatabase.5
-@@ -0,0 +1,77 @@
-+.TH FONTDATABASE 5
-+.SH NAME
-+FontDataBase \- database of fonts accessible to t1lib.
-+.SH DESCRIPTION
-+This manual page has been written for the Debian GNU/Linux
-+distribution.  It has been adapted from the documentation included in
-+the upstream
-+.B t1lib
-+distribution.
-+.PP
-+.B /etc/t1lib/FontDataBase
-+is a text file which contains, minimally, the basenames of Type 1 font 
-+files to be made accessible to the
-+.B t1lib
-+font rasterizer library.  The format is intentionally similar to that
-+of the
-+.B fonts.dir
-+and
-+.B fonts.scale
-+files used by X11.
-+.PP
-+Line 1 of this file contains a positive integer specifying the number
-+of fonts declared in that file. This is as in the
-+.B fonts.dir
-+files of the X11 system.
-+.PP
-+All remaining lines contain declarations of one font each. The only
-+thing taken from such a line is the last string (delimited by white
-+space) in it. It is assumed to be a filename of the format
-+\fIbasename\fR.\fIsomeextension\fR.
-+.PP
-+The \fIbasename\fR part is assumed to be the
-+.BR basename (1)
-+of a fontfile.  After the a string has been parsed, the
-+.I extension
-+is cut off and replaced in turn with
-+.I .pfa
-+and
-+.I .pfb.
-+The initialization routine tries to open a font file in
-+its search path with one of the resulting filenames.
-+.PP
-+The remainder of the line, i.e., from beginning to the start of the
-+filename string, is completely ignored and thus may contain
-+information for other programs.
-+.SH EXAMPLES
-+Here is a minimal font database file for 4 fonts:
-+.sp
-+.nf
-+4
-+isvl.afm
-+isvli.afm
-+isvd.afm
-+isvdi.afm
-+.fi
-+.PP
-+This file is \fIminimal\fR, because it contains just the information
-+needed, and nothing not needed by the library. 
-+.PP
-+Here is a more realistic example, which allows an application to match
-+a fully qualified X11 fontname to a FontID in
-+.B t1lib.
-+This is also a valid font database file:
-+.sp
-+.nf
-+4
-+Souvenir Souvenir-Light       --- \-itc-souvenir-light-r-normal--#-0-0-0-p-0-iso8859-1 isvl.afm
-+Souvenir Souvenir-LightItalic -*- \-itc-souvenir-light-i-normal--#-0-0-0-p-0-iso8859-1 isvli.afm
-+          Souvenir-Demi       *-- \-itc-souvenir-demi-r-normal--#-0-0-0-p-0-iso8859-1 isvd.afm
-+          Souvenir-DemiItalic **- \-itc-souvenir-demi-i-normal--#-0-0-0-p-0-iso8859-1 isvdi.afm
-+.fi
-+.PP
-+.SH FILES
-+.I /etc/t1lib/FontDataBase
-+.SH "SEE ALSO"
-+.BR mkfontdir (1x)
-+
diff --git a/source/l/taglib/taglib.SlackBuild b/source/l/taglib/taglib.SlackBuild
index 1f3673fc..31794626 100755
--- a/source/l/taglib/taglib.SlackBuild
+++ b/source/l/taglib/taglib.SlackBuild
@@ -69,14 +69,13 @@ find . \
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --enable-mp4 \
-  --enable-asf \
-  --program-prefix="" \
-  --program-suffix="" \
-  --build=$ARCH-slackware-linux
+CXX=gcc \
+cmake \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DLIB_SUFFIX="${LIBDIRSUFFIX}" \
+  -DWITH_MP4=ON \
+  -DWITH_ASF=ON \
+  .
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/l/urwid/urwid.SlackBuild b/source/l/urwid/urwid.SlackBuild
index b34a618a..152be625 100755
--- a/source/l/urwid/urwid.SlackBuild
+++ b/source/l/urwid/urwid.SlackBuild
@@ -3,6 +3,7 @@
 # Slackware build script for urwid
 
 # Copyright 2009 Andrew Psaltis <ampsaltis@gmail.com>
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -25,7 +26,7 @@
 # Modified by Robby Workman <rworkman@slackware.com>
 
 PRGNAM=urwid
-VERSION=0.9.9.1
+VERSION=1.0.1
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/l/v4l-utils/slack-desc b/source/l/v4l-utils/slack-desc
index 57491159..1f235d18 100644
--- a/source/l/v4l-utils/slack-desc
+++ b/source/l/v4l-utils/slack-desc
@@ -11,9 +11,9 @@ v4l-utils:
 v4l-utils: libv4l is a collection of libraries which adds a thin abstraction
 v4l-utils: layer on top of video4linux2 devices.  The purpose of this (thin)
 v4l-utils: layer is to make it easy for application writers to support a wide
-v4l-utils: variety of devices without having to write seperate code for
+v4l-utils: variety of devices without having to write separate code for
 v4l-utils: different devices in the same class.  Linux V4L2 and DVB API
 v4l-utils: utilities are also included.
 v4l-utils:
-v4l-utils: Homepage:  http://freshmeat.net/projects/libv4l
+v4l-utils: Homepage:  http://linuxtv.org
 v4l-utils:
diff --git a/source/l/v4l-utils/v4l-utils.SlackBuild b/source/l/v4l-utils/v4l-utils.SlackBuild
index c0ffa36b..da783994 100755
--- a/source/l/v4l-utils/v4l-utils.SlackBuild
+++ b/source/l/v4l-utils/v4l-utils.SlackBuild
@@ -78,9 +78,9 @@ export CFLAGS="$SLKCFLAGS"
 export CPPFLAGS="$SLKCFLAGS"
 export LDFLAGS="$SLKLDFLAGS"
 make ${NUMJOBS} PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \
-  make PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \
+  make PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} MANDIR=/usr/man || \
   exit 1
-make install PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG || exit 1
+make install PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} MANDIR=/usr/man DESTDIR=$PKG || exit 1
 
 # System udev files should go under /lib:
 if [ -r $PKG/etc/udev/rules.d/70-infrared.rules ]; then
diff --git a/source/l/virtuoso-ose/virtuoso-opensource-6.1.3.unicode.patch b/source/l/virtuoso-ose/virtuoso-opensource-6.1.3.unicode.patch
new file mode 100644
index 00000000..6aa5e5a5
--- /dev/null
+++ b/source/l/virtuoso-ose/virtuoso-opensource-6.1.3.unicode.patch
@@ -0,0 +1,16 @@
+--- libsrc/Wi/xqf.c	3 Mar 2011 11:56:45 -0000	1.21.2.9
++++ libsrc/Wi/xqf.c	26 Aug 2011 19:34:56 -0000	1.21.2.12
+@@ -3520,6 +3552,12 @@
+   desc = xqf_str_parser_descs + desc_idx;
+   if (DV_DB_NULL == arg_dtp)
+     return NEW_DB_NULL;
++  /* if we have wide and we want typed string we do utf8, cast do to default charset so we do not do it */
++  if (DV_WIDE == arg_dtp && desc->p_dest_dtp == DV_STRING)
++    {
++      res = box_wide_as_utf8_char (arg, box_length (arg) / sizeof (wchar_t) - 1, DV_STRING);
++      goto res_ready;
++    }
+   if (DV_STRING != arg_dtp)
+     {
+       caddr_t err = NULL;
+
diff --git a/source/l/virtuoso-ose/virtuoso-ose.SlackBuild b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild
index 5dd4fe5c..bb9d88ab 100755
--- a/source/l/virtuoso-ose/virtuoso-ose.SlackBuild
+++ b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2009, 2010  Eric Hameleers, Eindhoven, NL
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011  Eric Hameleers, Eindhoven, NL
+# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=virtuoso-opensource
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -61,6 +61,11 @@ cd $TMP
 rm -rf virtuoso-opensource-$VERSION
 tar xvf $CWD/virtuoso-opensource-$VERSION.tar.xz || exit 1
 cd virtuoso-opensource-$VERSION || exit 1
+
+# Apply a patch that fixes Unicode issue as described here:
+#   https://bugs.kde.org/show_bug.cgi?id=271664
+cat $CWD/virtuoso-opensource-6.1.3.unicode.patch | patch -p0 --verbose || exit
+
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/l/vte/fix_meta_alt_keybinding.patch b/source/l/vte/fix_meta_alt_keybinding.patch
new file mode 100644
index 00000000..bd364be5
--- /dev/null
+++ b/source/l/vte/fix_meta_alt_keybinding.patch
@@ -0,0 +1,74 @@
+From 180dcc578e13c6096e277fb853e7162db640f207 Mon Sep 17 00:00:00 2001
+From: Alexandre Rostovtsev <tetromino@gentoo.org>
+Date: Tue, 15 Nov 2011 03:06:40 -0500
+Subject: [PATCH] Map both gdk's Meta and Alt to vte's Meta for >=gtk+-3.2.2
+ compatibility
+
+Also, since VTE_META_MASK is now a mask with multiple bits set, code that
+compares gdk key modifiers to VTE_META_MASK by numerical equality is no
+longer guaranteed to work. Therefore, for such comparisons a new function,
+vte_keymap_fixup_modifiers, is introduced; it ensures that if any bits
+matching matching VTE_META_MASK are set, then all are set.
+
+https://bugzilla.gnome.org/show_bug.cgi?id=663779
+---
+ src/keymap.c |   15 +++++++++++++--
+ src/keymap.h |    2 +-
+ 2 files changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/src/keymap.c b/src/keymap.c
+index 9a21669..95b4c5b 100644
+--- a/src/keymap.c
++++ b/src/keymap.c
+@@ -990,6 +990,17 @@ static const struct _vte_keymap_group {
+ 	{GDK_KEY (F35),		_vte_keymap_GDK_F35},
+ };
+ 
++/* Restrict modifiers to the specified mask and ensure that VTE_META_MASK,
++ * despite being a compound mask, is treated as indivisible. */
++GdkModifierType
++_vte_keymap_fixup_modifiers(GdkModifierType modifiers,
++		GdkModifierType mask)
++{
++	if (modifiers & VTE_META_MASK)
++		modifiers |= VTE_META_MASK;
++	return modifiers & mask;
++}
++
+ /* Map the specified keyval/modifier setup, dependent on the mode, to either
+  * a literal string or a capability name. */
+ void
+@@ -1104,7 +1115,7 @@ _vte_keymap_map(guint keyval,
+ 	} else {
+ 		fkey_mode = fkey_default;
+ 	}
+-	modifiers &= (GDK_SHIFT_MASK | GDK_CONTROL_MASK | VTE_META_MASK | VTE_NUMLOCK_MASK);
++	modifiers = _vte_keymap_fixup_modifiers(modifiers, GDK_SHIFT_MASK | GDK_CONTROL_MASK | VTE_META_MASK | VTE_NUMLOCK_MASK);
+ 
+ 	/* Search for the conditions. */
+ 	for (i = 0; entries[i].normal_length || entries[i].special[0]; i++)
+@@ -1375,7 +1386,7 @@ _vte_keymap_key_add_key_modifiers(guint keyval,
+ 		return;
+ 	}
+ 
+-	switch (modifiers & significant_modifiers) {
++	switch (_vte_keymap_fixup_modifiers(modifiers, significant_modifiers)) {
+ 	case 0:
+ 		modifier = 0;
+ 		break;
+diff --git a/src/keymap.h b/src/keymap.h
+index 243e22e..21d9b8e 100644
+--- a/src/keymap.h
++++ b/src/keymap.h
+@@ -27,7 +27,7 @@
+ 
+ G_BEGIN_DECLS
+ 
+-#define VTE_META_MASK		GDK_META_MASK
++#define VTE_META_MASK		(GDK_META_MASK | GDK_MOD1_MASK)
+ #define VTE_NUMLOCK_MASK	GDK_MOD2_MASK
+ 
+ /* Map the specified keyval/modifier setup, dependent on the mode, to either
+-- 
+1.7.8.rc3
+
diff --git a/source/l/vte/vte.SlackBuild b/source/l/vte/vte.SlackBuild
index 858b119a..70386cb1 100755
--- a/source/l/vte/vte.SlackBuild
+++ b/source/l/vte/vte.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=vte
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -70,6 +70,12 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+# https://bugzilla.gnome.org/show_bug.cgi?id=663779
+zcat $CWD/fix_meta_alt_keybinding.patch.gz | patch -p1 || exit 1
+
+# Escape sequences can cause high CPU usage (CVE-2012-2738):
+zcat $CWD/vte.escape.cpu.usage.diff.gz | patch -p1 || exit 1
+
 # Configure:
 CFLAGS="$SLKCFLAGS" \
 ./configure \
diff --git a/source/l/vte/vte.escape.cpu.usage.diff b/source/l/vte/vte.escape.cpu.usage.diff
new file mode 100644
index 00000000..e82cf468
--- /dev/null
+++ b/source/l/vte/vte.escape.cpu.usage.diff
@@ -0,0 +1,89 @@
+--- ./src/table.c.orig	2011-08-16 16:52:48.000000000 -0500
++++ ./src/table.c	2012-08-08 21:25:15.080344805 -0500
+@@ -550,7 +550,7 @@
+ 		if (G_UNLIKELY (*array == NULL)) {
+ 			*array = g_value_array_new(1);
+ 		}
+-		g_value_set_long(&value, total);
++		g_value_set_long(&value, CLAMP (total, 0, G_MAXUSHORT));
+ 		g_value_array_append(*array, &value);
+ 	} while (i++ < arginfo->length);
+ 	g_value_unset(&value);
+--- ./src/vteseq.c.orig	2011-08-16 16:52:48.000000000 -0500
++++ ./src/vteseq.c	2012-08-08 21:25:15.104344804 -0500
+@@ -557,7 +557,7 @@
+                               GValueArray *params,
+                               VteTerminalSequenceHandler handler)
+ {
+-        vte_sequence_handler_multiple_limited(terminal, params, handler, G_MAXLONG);
++        vte_sequence_handler_multiple_limited(terminal, params, handler, G_MAXUSHORT);
+ }
+ 
+ static void
+@@ -1392,7 +1392,7 @@
+ static void
+ vte_sequence_handler_DC (VteTerminal *terminal, GValueArray *params)
+ {
+-	vte_sequence_handler_multiple(terminal, params, vte_sequence_handler_dc);
++	vte_sequence_handler_multiple_r(terminal, params, vte_sequence_handler_dc);
+ }
+ 
+ /* Delete a line at the current cursor position. */
+@@ -1785,7 +1785,7 @@
+ static void
+ vte_sequence_handler_RI (VteTerminal *terminal, GValueArray *params)
+ {
+-	vte_sequence_handler_multiple(terminal, params, vte_sequence_handler_nd);
++	vte_sequence_handler_multiple_r(terminal, params, vte_sequence_handler_nd);
+ }
+ 
+ /* Save cursor (position). */
+@@ -2777,8 +2777,7 @@
+ {
+ 	GValue *value;
+ 	VteScreen *screen;
+-	long param, end, row;
+-	int i;
++	long param, end, row, i, limit;
+ 	screen = terminal->pvt->screen;
+ 	/* The default is one. */
+ 	param = 1;
+@@ -2796,7 +2795,13 @@
+ 	} else {
+ 		end = screen->insert_delta + terminal->row_count - 1;
+ 	}
+-	/* Insert the new lines at the cursor. */
++
++	/* Only allow to insert as many lines as there are between this row
++         * and the end of the scrolling region. See bug #676090.
++         */
++        limit = end - row + 1;
++        param = MIN (param, limit);
++
+ 	for (i = 0; i < param; i++) {
+ 		/* Clear a line off the end of the region and add one to the
+ 		 * top of the region. */
+@@ -2817,8 +2822,7 @@
+ {
+ 	GValue *value;
+ 	VteScreen *screen;
+-	long param, end, row;
+-	int i;
++	long param, end, row, i, limit;
+ 
+ 	screen = terminal->pvt->screen;
+ 	/* The default is one. */
+@@ -2837,6 +2841,13 @@
+ 	} else {
+ 		end = screen->insert_delta + terminal->row_count - 1;
+ 	}
++
++        /* Only allow to delete as many lines as there are between this row
++         * and the end of the scrolling region. See bug #676090.
++         */
++        limit = end - row + 1;
++        param = MIN (param, limit);
++
+ 	/* Clear them from below the current cursor. */
+ 	for (i = 0; i < param; i++) {
+ 		/* Insert a line at the end of the region and remove one from
diff --git a/source/l/wv2/slack-desc b/source/l/wv2/slack-desc
deleted file mode 100644
index e5861a4b..00000000
--- a/source/l/wv2/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-   |-----handy-ruler------------------------------------------------------|
-wv2: wv2 (MS Word document import library)
-wv2:
-wv2: wv2 is a portable MS Word .doc import filter that is used by KWord.
-wv2: Currently, it supports MS Word 6, MS Word 95, MS Word 97, MS Word
-wv2: 2000, and MS Word 2002 (XP) documents.  Older versions like Word 2, 3,
-wv2: 4, and 5 aren't supported yet, but might be in the future.
-wv2:
-wv2: wv2's authors are Shaheed Haque, Werner Trobin, and David Faure.
-wv2:
-wv2:
-wv2:
diff --git a/source/l/wv2/wv2.SlackBuild b/source/l/wv2/wv2.SlackBuild
deleted file mode 100755
index 79d04b50..00000000
--- a/source/l/wv2/wv2.SlackBuild
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-VERSION=0.4.2
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-wv2
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf wv2-$VERSION
-tar xvf $CWD/wv2-$VERSION.tar.?z* || exit 1
-cd wv2-$VERSION
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-mkdir -p build
-cd build
-  cmake \
-    $KDE_OPT_ARGS \
-    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DMAN_INSTALL_DIR=/usr/man \
-    -DSYSCONF_INSTALL_DIR=/etc \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    ..
-   make $NUMJOBS || exit 1
-   make install DESTDIR=$PKG || exit 1
-cd -
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/usr/doc/wv2-$VERSION
-cp -a \
-  AUTHORS COPYING.LIB README RELEASE THANKS TODO \
-  $PKG/usr/doc/wv2-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/wv2-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/l/zlib/zlib.SlackBuild b/source/l/zlib/zlib.SlackBuild
index 9d5f928d..eb284280 100755
--- a/source/l/zlib/zlib.SlackBuild
+++ b/source/l/zlib/zlib.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=zlib
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -64,13 +64,6 @@ rm -rf zlib-$VERSION
 tar xvf $CWD/zlib-$VERSION.tar.?z* || exit 1
 cd zlib-$VERSION || exit 1
 
-# Attempt to work around a problem that affects libxml2 on 64-bits
-# and probably breaks other things as well.  The issue stems from
-# misuse of zlib by other libraries, but there's no other good place
-# to put this fix.  Note to self - keep an eye on upstream for a
-# proper fix.
-zcat $CWD/zlib.largefile64_source.diff.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -104,6 +97,18 @@ cat zlib.3 | gzip -9c > $PKG/usr/man/man3/zlib.3.gz
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
 cat zlib.pc > $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/zlib.pc
 
+# Now that libkmod requires libz, we had better move the shared library
+# up a level:
+mkdir $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  for file in lib*.so.?.* ; do
+    mv $file ../../lib${LIBDIRSUFFIX}
+    ln -sf ../../lib${LIBDIRSUFFIX}/$file .
+  done
+  cp -a lib*.so.? ../../lib${LIBDIRSUFFIX}
+)
+
+# Strip binaries:
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/l/zlib/zlib.largefile64_source.diff b/source/l/zlib/zlib.largefile64_source.diff
deleted file mode 100644
index 61d7b84d..00000000
--- a/source/l/zlib/zlib.largefile64_source.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./zlib.h.orig	2010-04-19 23:12:48.000000000 -0500
-+++ ./zlib.h	2011-02-09 12:12:15.000000000 -0600
-@@ -1578,7 +1578,7 @@
- #  define gzoffset gzoffset64
- #  define adler32_combine adler32_combine64
- #  define crc32_combine crc32_combine64
--#  ifdef _LARGEFILE64_SOURCE
-+#  ifndef _LARGEFILE64_SOURCE
-      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-      ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
-      ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
diff --git a/source/local/README b/source/local/README
deleted file mode 100644
index 4e535154..00000000
--- a/source/local/README
+++ /dev/null
@@ -1 +0,0 @@
-Build scripts that are unique to this $ARCH.
diff --git a/source/local/jre/COPYRIGHT b/source/local/jre/COPYRIGHT
deleted file mode 100644
index fcb67309..00000000
--- a/source/local/jre/COPYRIGHT
+++ /dev/null
@@ -1,70 +0,0 @@
-Copyright © 2006, 2011, Oracle and/or its affiliates. 
-All rights reserved.
-
-This software and related documentation are provided under a
-license agreement containing restrictions on use and
-disclosure and are protected by intellectual property laws.
-Except as expressly permitted in your license agreement or
-allowed by law, you may not use, copy, reproduce, translate,
-broadcast, modify, license, transmit, distribute, exhibit,
-perform, publish, or display any part, in any form, or by
-any means.  Reverse engineering, disassembly, or
-decompilation of this software, unless required by law for
-interoperability, is prohibited.
-
-The information contained herein is subject to change
-without notice and is not warranted to be error-free.  If
-you find any errors, please report them to us in writing.
-
-If this is software or related software documentation that
-is delivered to the U.S.  Government or anyone licensing it
-on behalf of the U.S.  Government, the following notice is
-applicable:
-
-U.S.  GOVERNMENT RIGHTS Programs, software, databases, and
-related documentation and technical data delivered to U.S.
-Government customers are "commercial computer software" or
-"commercial technical data" pursuant to the applicable
-Federal Acquisition Regulation and agency-specific
-supplemental regulations.  As such, the use, duplication,
-disclosure, modification, and adaptation shall be subject to
-the restrictions and license terms set forth in the
-applicable Government contract, and, to the extent
-applicable by the terms of the Government contract, the
-additional rights set forth in FAR 52.227-19, Commercial
-Computer Software License (December 2007).  Oracle America,
-Inc., 500 Oracle Parkway, Redwood City, CA 94065.
-
-This software or hardware is developed for general use in a
-variety of information management applications.  It is not
-developed or intended for use in any inherently dangerous
-applications, including applications which may create a risk
-of personal injury.  If you use this software or hardware in
-dangerous applications, then you shall be responsible to
-take all appropriate fail-safe, backup, redundancy, and
-other measures to ensure its safe use.  Oracle Corporation
-and its affiliates disclaim any liability for any damages
-caused by use of this software or hardware in dangerous
-applications.
-
-Oracle and Java are registered trademarks of Oracle and/or
-its affiliates.  Other names may be trademarks of their
-respective owners.
-
-AMD, Opteron, the AMD logo, and the AMD Opteron logo are
-trademarks or registered trademarks of Advanced Micro
-Devices.  Intel and Intel Xeon are trademarks or registered
-trademarks of Intel Corporation.  All SPARC trademarks are
-used under license and are trademarks or registered
-trademarks of SPARC International, Inc.  UNIX is a
-registered trademark licensed through X/Open Company, Ltd.
-
-This software or hardware and documentation may provide
-access to or information on content, products, and services
-from third parties.  Oracle Corporation and its affiliates
-are not responsible for and expressly disclaim all
-warranties of any kind with respect to third-party content,
-products, and services.  Oracle Corporation and its
-affiliates will not be responsible for any loss, costs, or
-damages incurred due to your access to or use of third-party
-content, products, or services.
diff --git a/source/local/jre/README b/source/local/jre/README
deleted file mode 100644
index cdb30f2c..00000000
--- a/source/local/jre/README
+++ /dev/null
@@ -1 +0,0 @@
-Please refer to http://java.com/licensereadme
diff --git a/source/local/jre/THIRDPARTYLICENSEREADME.txt b/source/local/jre/THIRDPARTYLICENSEREADME.txt
deleted file mode 100644
index 4381e7df..00000000
--- a/source/local/jre/THIRDPARTYLICENSEREADME.txt
+++ /dev/null
@@ -1 +0,0 @@
-Please refer to http://java.com/thirdpartylicense
diff --git a/source/local/jre/Welcome.html b/source/local/jre/Welcome.html
deleted file mode 100644
index 33a0ba54..00000000
--- a/source/local/jre/Welcome.html
+++ /dev/null
@@ -1,26 +0,0 @@
-<html>
-<head>
-<title>
-Welcome to the Java(TM) Platform
-</title>
-</head>
-<body>
-
-<h2>Welcome to the Java<SUP><FONT SIZE=-2>TM</FONT></SUP> Platform</h2>
-<p> Welcome to the Java<SUP><FONT SIZE=-2>TM</FONT></SUP> Standard Edition Runtime 
-  Environment. This provides complete runtime support for Java applications. 
-<p> The runtime environment includes the Java<SUP><FONT SIZE=-2>TM</FONT></SUP> 
-  Plug-in product which supports the Java environment inside web browsers. 
-<h3>References</h3>
-<p>
-See the <a href=http://java.sun.com/javase/6/docs/technotes/guides/plugin/index.html>Java Plug-in</a> product
-documentation for more information on using the Java Plug-in product.
-<p> See the <a href=http://java.sun.com/javase>Java Platform</a> web site for 
-  more information on the Java Platform. 
-<hr>
-<font size="-2">
-Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
-</font>
-<p>
-</body>
-</html>
diff --git a/source/local/jre/jre.SlackBuild b/source/local/jre/jre.SlackBuild
deleted file mode 100755
index 297bfeb3..00000000
--- a/source/local/jre/jre.SlackBuild
+++ /dev/null
@@ -1,130 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-# Note that the slack-desc file mentions the JRE version (edit when upgrading)!
-
-VERSION=6u25
-DVER=1.6.0_25
-ARCH=x86_64
-BUILD=${BUILD:-1}
-
-# As of jre-6u12 a 64bit plugin is available.
-# SUN says:
-# Please note that the 64-bit JRE only works with the 64-bit browser plug-in,
-# while the 32-bit JRE only works with 32-bit browser plug-in.
-# If you use both 32-bit and 64-bit browsers interchangeably, you will need to
-# have both 32-bit and 64-bit JRE's installed on your machine. 
-JAVA_ARCH=${JAVA_ARCH:-x64}      # or i586 if you want the 32bit version
-
-if [ "$JAVA_ARCH" = "x64" ]; then
-  LIB_ARCH=amd64
-else
-  LIB_ARCH=i386
-fi
-
-if [ "$ARCH" = "x86_64" ]; then
-  LIBDIRSUFFIX="64"
-else
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-jre
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $PKG
-mkdir -p usr/lib${LIBDIRSUFFIX}
-cd usr/lib${LIBDIRSUFFIX}
-yes yes | sh $( ls --indicator-style none $CWD/jre-${VERSION}-linux-${JAVA_ARCH}*.bin | tail -1) || exit 1
-mkdir -p $PKG/etc/profile.d
-for file in $(ls $CWD/profile.d/*) ; do
-  cat $file | sed -e "s#lib/java#lib${LIBDIRSUFFIX}/java#" \
-    > $PKG/etc/profile.d/$(basename $file)
-done
-chown -R root:root $PKG
-( cd $PKG
-  find . \
-   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-   -exec chmod 755 {} \; -o \
-   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-   -exec chmod 644 {} \;
-)
-chmod 755 $PKG/etc/profile.d/*
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  mv jre${DVER} java || exit 1
-  ln -sf java jre${DVER}
-) || exit 1
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-  ln -sf /usr/lib${LIBDIRSUFFIX}/java/lib/${LIB_ARCH}/libnpjp2.so libnpjp2.so
-)
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  ln -sf ./java/lib/${LIB_ARCH}/server/libjvm.so .
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cat << EOF > $PKG/install/doinst.sh
-# Clean up a potential upgrade mess caused by changing the
-# installation directory to /usr/lib${LIBDIRSUFFIX}/java/:
-if [ -L usr/lib${LIBDIRSUFFIX}/java ]; then
-  rm -rf usr/lib${LIBDIRSUFFIX}/java
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/man
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/lib/${LIB_ARCH}/server
-  mkdir -p usr/lib/java/lib${LIBDIRSUFFIX}/${LIB_ARCH}/client
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/javaws
-  mkdir -p usr/lib${LIBDIRSUFFIX}/java/bin
-  mkdir -p usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-fi
-if [ -L ControlPanel ]; then
-  rm -f ControlPanel
-fi
-if [ -L ja ]; then
-  rm -f ja
-fi
-if [ -L javaws ]; then
-  rm -f javaws
-fi
-if [ -L libjsig.so ]; then
-  rm -f libjsig.so
-fi
-# End cleanup.
-EOF
-
-# Install the desktop/mime files:
-mkdir -p $PKG/usr/share/{applications,icons,mime}
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/applications/* \
-  $PKG/usr/share/applications/
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/icons/hicolor \
-  $PKG/usr/share/icons/
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/java/lib/desktop/mime/packages \
-  $PKG/usr/share/mime/
-
-# We ship the package unmodified, so we do not compress manpages.
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/jre-$(echo $VERSION | tr - _)-${ARCH}-$BUILD.txz
-
diff --git a/source/local/jre/slack-desc b/source/local/jre/slack-desc
deleted file mode 100644
index 925218e2..00000000
--- a/source/local/jre/slack-desc
+++ /dev/null
@@ -1,18 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-   |-----handy-ruler------------------------------------------------------|
-jre: Java(TM) 2 Platform Standard Edition Runtime Environment.
-jre:
-jre: The J2SE(TM) Runtime Environment (JRE) is intended for software
-jre: developers and vendors to redistribute with their applications.
-jre: It contains the Java virtual machine, runtime class libraries, and
-jre: Java application launcher that are necessary to run programs written
-jre: in the Java programming language.
-jre:
-jre: If you need development tools, obtain the jdk from /extra, or see the
-jre: web page:   http://java.com/
-jre:
diff --git a/source/n/ModemManager/ModemManager.SlackBuild b/source/n/ModemManager/ModemManager.SlackBuild
new file mode 100755
index 00000000..5089e02d
--- /dev/null
+++ b/source/n/ModemManager/ModemManager.SlackBuild
@@ -0,0 +1,105 @@
+#!/bin/sh
+
+# Slackware build script for ModemManager
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified by Eric Hameleers, Eindhoven, NL
+
+PKGNAM=ModemManager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+BUILD=${BUILD:-1}
+TAG=${TAG:-}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z*
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-pppd-plugin-dir=/usr/lib${LIBDIRSUFFIX}/pppd/2.4.5 \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING ChangeLog INSTALL NEWS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}
+
diff --git a/source/n/ModemManager/slack-desc b/source/n/ModemManager/slack-desc
new file mode 100644
index 00000000..2455ad8e
--- /dev/null
+++ b/source/n/ModemManager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+ModemManager: ModemManager (mobile broadband modem API)
+ModemManager:
+ModemManager: ModemManager provides a unified high level API for communicating with
+ModemManager: mobile broadband modems. 
+ModemManager:
+ModemManager:
+ModemManager:
+ModemManager:
+ModemManager: For more info, see:
+ModemManager:   http://cgit.freedesktop.org/ModemManager/ModemManager/
+ModemManager:
diff --git a/source/n/NetworkManager/11-initialize-nm-remote-settings.patch b/source/n/NetworkManager/11-initialize-nm-remote-settings.patch
new file mode 100644
index 00000000..fff4194b
--- /dev/null
+++ b/source/n/NetworkManager/11-initialize-nm-remote-settings.patch
@@ -0,0 +1,27 @@
+commit dd0460697c4e281fe277b53916d5251332e1aafc
+Author: Jiří Klimeš <jklimes@redhat.com>
+Date:   Tue Mar 27 22:36:55 2012 +0200
+
+    libnm-glib: initialize NMRemoteSettings in nm_remote_settings_new() (rh #806664)
+    
+    The object was not initialized after creation in nm_remote_settings_new(). This
+    was a regression caused by 762df85234e7a042a2a5d31053e6cc273ae3e2ec.
+
+diff --git a/libnm-glib/nm-remote-settings.c b/libnm-glib/nm-remote-settings.c
+index 8f213f9..b6b6c18 100644
+--- a/libnm-glib/nm-remote-settings.c
++++ b/libnm-glib/nm-remote-settings.c
+@@ -728,7 +728,12 @@ properties_changed_cb (DBusGProxy *proxy,
+ NMRemoteSettings *
+ nm_remote_settings_new (DBusGConnection *bus)
+ {
+-	return g_object_new (NM_TYPE_REMOTE_SETTINGS, NM_REMOTE_SETTINGS_BUS, bus, NULL);
++	NMRemoteSettings *settings;
++
++	settings = g_object_new (NM_TYPE_REMOTE_SETTINGS, NM_REMOTE_SETTINGS_BUS, bus, NULL);
++
++	_nm_remote_settings_ensure_inited (settings);
++	return settings;
+ }
+ 
+ static void
diff --git a/source/n/NetworkManager/55NetworkManager b/source/n/NetworkManager/55NetworkManager
new file mode 100644
index 00000000..f3c6df5e
--- /dev/null
+++ b/source/n/NetworkManager/55NetworkManager
@@ -0,0 +1,42 @@
+#!/bin/sh
+# If we are running NetworkManager, tell it we are going to sleep.
+# TODO: Make NetworkManager smarter about how to handle sleep/resume
+#       If we are asleep for less time than it takes for TCP to reset a
+#       connection, and we are assigned the same IP on resume, we should
+#       not break established connections.  Apple can do this, and it is
+#       rather nifty.
+
+. "${PM_FUNCTIONS}"
+
+suspend_nm()
+{
+	# Tell NetworkManager to shut down networking
+        printf "Having NetworkManager put all interaces to sleep..."
+	dbus_send --system                         \
+		--dest=org.freedesktop.NetworkManager  \
+		/org/freedesktop/NetworkManager        \
+		org.freedesktop.NetworkManager.sleep && \
+	    echo Done. || echo Failed.
+}
+
+resume_nm()
+{
+	# Wake up NetworkManager and make it do a new connection
+	printf "Having NetworkManager wake interfaces back up..."
+        dbus_send --system                        \
+		--dest=org.freedesktop.NetworkManager \
+		/org/freedesktop/NetworkManager       \
+		org.freedesktop.NetworkManager.wake && \
+	    echo Done. || echo Failed.
+}
+
+case "$1" in
+	hibernate|suspend)
+		suspend_nm
+		;;
+	thaw|resume)
+		resume_nm
+		;;
+	*) exit $NA
+		;;
+esac
diff --git a/source/n/NetworkManager/NetworkManager.SlackBuild b/source/n/NetworkManager/NetworkManager.SlackBuild
new file mode 100755
index 00000000..d7e9d1f8
--- /dev/null
+++ b/source/n/NetworkManager/NetworkManager.SlackBuild
@@ -0,0 +1,154 @@
+#!/bin/sh
+
+# Slackware build script for NetworkManager
+
+# Copyright 2010,2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2011, 2012  by Eric Hameleers, Eindhoven, NL
+
+PKGNAM=NetworkManager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+TAG=${TAG:-}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+zcat $CWD/11-initialize-nm-remote-settings.patch.gz | patch -p1 --verbose || exit 1
+
+# Find the version off pppd installed or else assume we are on -current:
+PPPD=$( basename $(find /usr/lib${LIBDIRSUFFIX}/pppd -type d -maxdepth 1 -mindepth 1) )
+[ -z "$PPPD" ] && PPPD=2.4.5
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-pppd-plugin-dir=/usr/lib${LIBDIRSUFFIX}/pppd/$PPPD \
+  --with-crypto=nss \
+  --enable-more-warnings=no \
+  --without-resolvconf \
+  --with-dhcpcd=/sbin/dhcpcd \
+  --with-dhclient=yes \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Don't run NetworkManager by default just because it got installed.
+# Instead, the init script will have to be made executable first.
+# This should avoid nasty surprises on potentially remotely located machines.
+chmod 644 $PKG/etc/rc.d/rc.networkmanager
+
+# Don't clobber existing rc.networkmanager
+mv $PKG/etc/rc.d/rc.networkmanager $PKG/etc/rc.d/rc.networkmanager.new
+
+# Add a 'starter' NetworkManager.conf file
+# This sets the hostname (during postinstall) to match the system's name
+# and defines dhcpcd as the dhcp client to use
+mkdir -p $PKG/etc/NetworkManager
+cat $CWD/NetworkManager.conf.new > \
+    $PKG/etc/NetworkManager/NetworkManager.conf.new
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS CONTRIBUTING COPYING ChangeLog INSTALL NEWS README TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+# In case someone needs this still:
+cp $CWD/55NetworkManager $PKG/usr/doc/$PKGNAM-$VERSION/
+cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  cat ChangeLog | head -n 1000 > $PKG/usr/doc/$PKGNAM-$VERSION/ChangeLog
+  touch -r ChangeLog $PKG/usr/doc/$PKGNAM-$VERSION/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}
+
diff --git a/source/n/NetworkManager/NetworkManager.conf.new b/source/n/NetworkManager/NetworkManager.conf.new
new file mode 100644
index 00000000..71945e90
--- /dev/null
+++ b/source/n/NetworkManager/NetworkManager.conf.new
@@ -0,0 +1,11 @@
+# /etc/NetworkManager/NetworkManager.conf
+#
+# See NetworkManager.conf(5) for more information on this file
+
+[main]
+plugins=keyfile
+dhcp=dhcpcd
+
+[keyfile]
+hostname=yourhostname
+
diff --git a/source/n/NetworkManager/README b/source/n/NetworkManager/README
new file mode 100644
index 00000000..5556f27f
--- /dev/null
+++ b/source/n/NetworkManager/README
@@ -0,0 +1,15 @@
+NetworkManager attempts to keep an active network connection available at all
+times.  The point of NetworkManager is to make networking configuration and
+setup as painless and automatic as possible.  NetworkManager is intended to
+replace default route, replace other routes, set IP addresses, and in general
+configure networking as NM sees fit (with the possibility of manual override as
+necessary).  In effect, the goal of NetworkManager is to make networking Just
+Work with a minimum of user hassle, but still allow customization and a high
+level of manual network control.
+
+You will probably want to install network-manager-applet (for a configuration
+UI) for sure, along with ModemManager (if you want support for configuring
+broadband modem connections) perhaps one or more of the VPN-related addons.
+
+You will also need to start rc.networkmanager during boot - you can use
+rc.local, or perhaps you'll want to edit rc.M's call to rc.wicd...  :-)
diff --git a/source/n/NetworkManager/doinst.sh b/source/n/NetworkManager/doinst.sh
new file mode 100644
index 00000000..2b419b26
--- /dev/null
+++ b/source/n/NetworkManager/doinst.sh
@@ -0,0 +1,32 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+if [ -e etc/HOSTNAME ]; then
+  sed -i "s,yourhostname,$(cat etc/HOSTNAME | cut -f1 -d .)," \
+    etc/NetworkManager/NetworkManager.conf.new
+fi
+
+preserve_perms etc/rc.d/rc.networkmanager.new
+config etc/NetworkManager/NetworkManager.conf.new
+
diff --git a/source/n/NetworkManager/slack-desc b/source/n/NetworkManager/slack-desc
new file mode 100644
index 00000000..2a47aaa3
--- /dev/null
+++ b/source/n/NetworkManager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+NetworkManager: NetworkManager (Networking that Just Works)
+NetworkManager:
+NetworkManager: The point of NetworkManager is to make networking configuration and
+NetworkManager: setup as painless and automatic as possible.  NetworkManager sets IP
+NetworkManager: addresses, default routes, associating with wireless access points
+NetworkManager: or wired LANs, and other network configuration settings in a simple,
+NetworkManager: automated fashion (manual overrides are still possible).
+NetworkManager:
+NetworkManager:
+NetworkManager: Home page: http://projects.gnome.org/NetworkManager/
+NetworkManager:
diff --git a/source/n/alpine/alpine.SlackBuild b/source/n/alpine/alpine.SlackBuild
index 1dd64e6a..07961ff2 100755
--- a/source/n/alpine/alpine.SlackBuild
+++ b/source/n/alpine/alpine.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,9 +22,9 @@
 
 
 PKGNAM=alpine
-VERSION=${VERSION:-2.00}
-ALPINEBUILD=${ALPINEBUILD:-3}
-IMAPDBUILD=${IMAPDBUILD:-2}
+VERSION=${VERSION:-2.02}
+ALPINEBUILD=${ALPINEBUILD:-1}
+IMAPDBUILD=${IMAPDBUILD:-1}
 PINEPGP=${PINEPGP:-0.18.0}
 
 # Automatically determine the architecture we're building on:
@@ -37,8 +37,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
-# There are reports that > 1 won't work here:
-NUMJOBS=${NUMJOBS:-" -j1 "}
+# We don't use this below as it breaks the build.
+NUMJOBS=${NUMJOBS:-" -j6 "}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
@@ -55,9 +55,9 @@ elif [ "$ARCH" = "x86_64" ]; then
 fi
 
 cd $TMP
-rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
-cd ${PKGNAM}-$VERSION
+rm -rf re-alpine-${VERSION}
+tar xvf $CWD/re-alpine-$VERSION.tar.?z* || exit 1
+cd re-alpine-$VERSION
 
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
@@ -86,17 +86,12 @@ CFLAGS="$SLKCFLAGS" \
   --program-suffix= \
   --build=$ARCH-slackware-linux
 
-# This seems to ignore sysconfdir and libdir, so it's pretty useless to try them.
-# Brute-force it.
-# Eric says: no! Use configure parameters.
-#zcat $CWD/alpine.config.h.diff.gz | patch -p1 --verbose || exit 1
-
 # Correct paths and programs in tech-notes.txt:
 zcat $CWD/alpine.tech-notes.txt.diff.gz | patch -p1 --verbose || exit 1
 
 # Build and install:
 # Since we build non-compliant to RFC3501 we have to answer 'y' half-way:
-echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix || exit 1
+echo y | make EXTRACFLAGS="-fPIC" SSLTYPE=unix || exit 1
 
 make install SSLTYPE=unix DESTDIR=$PKG || exit 1
 
@@ -171,11 +166,10 @@ PKG2=/tmp/package-imapd
 cd $TMP
 rm -rf $PKG2
 mkdir -p $PKG2
-cd ${PKGNAM}-$VERSION/imap
+cd re-alpine-$VERSION/imap
 mkdir -p $PKG2/usr/doc/imapd-$VERSION
 cp -a \
   CONTENTS LICENSE.txt NOTICE SUPPORT \
-  imap/docs/md5.txt \
   $PKG2/usr/doc/imapd-$VERSION
 cat << EOF > $PKG2/usr/doc/imapd-$VERSION/additional-imap-documentation
 Additional documentation for imapd may be found in the alpine
diff --git a/source/n/alpine/alpine.config.h.diff b/source/n/alpine/alpine.config.h.diff
deleted file mode 100644
index 03064373..00000000
--- a/source/n/alpine/alpine.config.h.diff
+++ /dev/null
@@ -1,15 +0,0 @@
---- ./include/config.h.orig	2008-08-06 20:59:51.000000000 -0500
-+++ ./include/config.h	2008-08-06 21:00:37.000000000 -0500
-@@ -557,10 +557,10 @@
- #define STDC_HEADERS 1
- 
- /* System pinerc */
--#define SYSTEM_PINERC "/usr/lib/pine.conf"
-+#define SYSTEM_PINERC "/etc/pine.conf"
- 
- /* System fixed pinerc */
--#define SYSTEM_PINERC_FIXED "/usr/lib/pine.conf.fixed"
-+#define SYSTEM_PINERC_FIXED "/etc/pine.conf.fixed"
- 
- /* Pine-Centric Host Specifier */
- #define SYSTYPE "LNX"
diff --git a/source/n/bind/bind.SlackBuild b/source/n/bind/bind.SlackBuild
index dc7014a3..eed6f86a 100755
--- a/source/n/bind/bind.SlackBuild
+++ b/source/n/bind/bind.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,8 +22,8 @@
 
 
 PKGNAM=bind
-VERSION=${VERSION:-9.7.3}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-9.9.1-P3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/bind/caching-example/named.root b/source/n/bind/caching-example/named.root
index d081faaf..8fbbb656 100644
--- a/source/n/bind/caching-example/named.root
+++ b/source/n/bind/caching-example/named.root
@@ -9,8 +9,8 @@
 ;           on server           FTP.INTERNIC.NET
 ;       -OR-                    RS.INTERNIC.NET
 ;
-;       last update:    Jun 17, 2010
-;       related version of root zone:   2010061700
+;       last update:    Jun 8, 2011
+;       related version of root zone:   2011060800
 ;
 ; formerly NS.INTERNIC.NET
 ;
@@ -32,6 +32,7 @@ C.ROOT-SERVERS.NET.      3600000      A     192.33.4.12
 ;
 .                        3600000      NS    D.ROOT-SERVERS.NET.
 D.ROOT-SERVERS.NET.      3600000      A     128.8.10.90
+D.ROOT-SERVERS.NET.	 3600000      AAAA  2001:500:2D::D
 ;
 ; FORMERLY NS.NASA.GOV
 ;
diff --git a/source/n/bluez-hcidump/bluez-hcidump-2.4.tar.sign b/source/n/bluez-hcidump/bluez-hcidump-2.4.tar.sign
new file mode 100644
index 00000000..42ee696a
--- /dev/null
+++ b/source/n/bluez-hcidump/bluez-hcidump-2.4.tar.sign
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=q5pj
+-----END PGP SIGNATURE-----
diff --git a/source/n/bluez-hcidump/bluez-hcidump.SlackBuild b/source/n/bluez-hcidump/bluez-hcidump.SlackBuild
index e03037ab..247e67dc 100755
--- a/source/n/bluez-hcidump/bluez-hcidump.SlackBuild
+++ b/source/n/bluez-hcidump/bluez-hcidump.SlackBuild
@@ -22,7 +22,7 @@
 
 
 PKGNAM=bluez-hcidump
-VERSION=${VERSION:-2.0}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -76,7 +76,6 @@ CFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --sysconfdir=/etc \
   --mandir=/usr/man \
-  --disable-static \
   --build=$ARCH-slackware-linux
 
 # Build and install:
diff --git a/source/n/bluez/bluez-4.91.tar.sign b/source/n/bluez/bluez-4.91.tar.sign
deleted file mode 100644
index bb9b05b6..00000000
--- a/source/n/bluez/bluez-4.91.tar.sign
+++ /dev/null
@@ -1,8 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.11 (GNU/Linux)
-Comment: See http://www.kernel.org/signature.html for info
-
-iD8DBQBNkiAFyGugalF9Dw4RAqa6AJ9bxkhDm2sW6JqVMT8JwSa/5eFZaQCbBuKA
-27f95iFeuRTVrhRkoFiTOto=
-=u4px
------END PGP SIGNATURE-----
diff --git a/source/n/bluez/bluez-4.99.tar.sign b/source/n/bluez/bluez-4.99.tar.sign
new file mode 100644
index 00000000..a9a039be
--- /dev/null
+++ b/source/n/bluez/bluez-4.99.tar.sign
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=BIdO
+-----END PGP SIGNATURE-----
diff --git a/source/n/bluez/bluez.SlackBuild b/source/n/bluez/bluez.SlackBuild
index 0403c932..d77c1514 100755
--- a/source/n/bluez/bluez.SlackBuild
+++ b/source/n/bluez/bluez.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for bluez - http://www.bluez.org
 
-# Copyright 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,7 +24,7 @@
 
 PKGNAM=bluez
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -70,16 +70,8 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Fixup the dbus config file for our usage:
-zcat $CWD/patches/bluez-dbus-config.patch.gz | patch -p1 --verbose || exit 1
-
-# Use a wrapper to check rc.bluetooth mode before starting bluetoothd
-zcat $CWD/patches/bluez-run_udev_helper.patch.gz | patch -p1 --verbose || exit 1
-
-# Unbreak a Dell USB mouse
-# https://bugzilla.novell.com/show_bug.cgi?id=522287
-# https://bugzilla.redhat.com/show_bug.cgi?id=517088
-zcat $CWD/patches/bluez-unbreak_dell_mouse.patch.gz | patch -p1 --verbose || exit 1
+# Enable the audio socket in audio.conf:
+zcat $CWD/bluez.enable.audio.socket.diff.gz | patch -p1 --verbose || exit 1
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
@@ -89,10 +81,13 @@ CXXFLAGS="$SLKCFLAGS" \
   --sysconfdir=/etc \
   --mandir=/usr/man \
   --localstatedir=/var \
+  --enable-datafiles \
+  --enable-audio \
   --enable-gstreamer \
   --enable-alsa \
   --enable-usb \
   --enable-tools\
+  --enable-input \
   --enable-bccmd \
   --enable-hid2hci \
   --enable-dfutool \
@@ -101,38 +96,30 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-dund \
   --enable-cups \
   --enable-service \
-  --enable-udevrules \
-  --enable-configfiles \
+  --enable-network \
+  --enable-serial \
+  --enable-health \
+  --enable-pnat \
+  --enable-maemo6 \
+  --enable-wiimote \
+  --enable-test \
+  --enable-dbusoob \
+  --with-ouifile=/usr/share/hwdata/oui.txt \
   --disable-silent-rules \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# I'm don't think we need this, but I'll leave it commented just in case:
-# http://bugs.archlinux.org/task/4930
-# The dbus-1 and bluetooth linkages are obvious, but I had to get the rt and
-# pthread ones from the old bluez-utils (VERSION=3.36) tests/Makefile
-#gcc $SLKCFLAGS $(pkg-config --cflags dbus-1) -DVERSION=3.36 \
-#  -L$(pwd)/lib/.libs -ldbus-1 -lbluetooth -lpthread -lrt \
-#  $CWD/passkey-agent.c -o $PKG/usr/bin/passkey-agent || exit 1
-
+cp scripts/bluetooth-serial.rules $PKG/lib/udev/rules.d/97-bluetooth-serial.rules || exit 1
 cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
 chmod 0755 $PKG/lib/udev/bluetooth_serial
 
-cat $CWD/config/bluetooth.sh > $PKG/lib/udev/bluetooth.sh
-chmod 0755 $PKG/lib/udev/bluetooth.sh
-
-# SuSE says this is safe... :-)
-mkdir -p $PKG/etc/modprobe.d
-cat $CWD/config/bluetooth.modprobe > $PKG/etc/modprobe.d/bluetooth.conf
-
 mkdir -p $PKG/etc/bluetooth
 cp -a audio/audio.conf $PKG/etc/bluetooth
 cp -a input/input.conf $PKG/etc/bluetooth
 cp -a network/network.conf $PKG/etc/bluetooth
 cp -a serial/serial.conf $PKG/etc/bluetooth
-cp -a tools/rfcomm.conf $PKG/etc/bluetooth
 chmod 644 $PKG/etc/bluetooth/*.conf
 
 mkdir -p $PKG/etc/alsa
diff --git a/source/n/bluez/bluez.enable.audio.socket.diff b/source/n/bluez/bluez.enable.audio.socket.diff
new file mode 100644
index 00000000..52b9d0c6
--- /dev/null
+++ b/source/n/bluez/bluez.enable.audio.socket.diff
@@ -0,0 +1,12 @@
+--- ./audio/audio.conf.orig	2010-08-25 00:10:02.000000000 -0500
++++ ./audio/audio.conf	2012-09-09 12:36:31.766492102 -0500
+@@ -4,6 +4,9 @@
+ # particular interface
+ [General]
+ 
++# Enable the audio socket
++Enable=Socket
++
+ # Switch to master role for incoming connections (defaults to true)
+ #Master=true
+ 
diff --git a/source/n/bluez/config/bluetooth.sh b/source/n/bluez/config/bluetooth.sh
deleted file mode 100644
index 22034551..00000000
--- a/source/n/bluez/config/bluetooth.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# Check whether /etc/rc.d/rc.bluetooth is executable before starting
-# the bluetooth subsystem for hotplugged bluetooth devices
-[ -x /etc/rc.d/rc.bluetooth ] && exec /usr/sbin/bluetoothd --udev
-exit 0
-
diff --git a/source/n/bluez/config/rc.bluetooth b/source/n/bluez/config/rc.bluetooth
index 12540d83..296c4542 100644
--- a/source/n/bluez/config/rc.bluetooth
+++ b/source/n/bluez/config/rc.bluetooth
@@ -1,12 +1,11 @@
 #!/bin/sh
 
 bluez_start() {
-  # bluetoothd requires dbus, but dbus isn't started early enough during
-  # system boot, so we have to re-trigger the events now
-  udevadm trigger --subsystem-match=bluetooth --action=add
+  /usr/sbin/bluetoothd
 }
 
 bluez_stop() {
+  udevadm trigger --subsystem-match=bluetooth --action=remove
   pkill -TERM bluetoothd 1>/dev/null 2>/dev/null
 }
 
diff --git a/source/n/bluez/doinst.sh b/source/n/bluez/doinst.sh
index 0d4dde1d..fe68ad7f 100644
--- a/source/n/bluez/doinst.sh
+++ b/source/n/bluez/doinst.sh
@@ -25,5 +25,4 @@ config etc/bluetooth/main.conf.new
 config etc/bluetooth/network.conf.new
 config etc/bluetooth/serial.conf.new
 config etc/bluetooth/rfcomm.conf.new
-config etc/modprobe.d/bluetooth.conf.new
 
diff --git a/source/n/bluez/passkey-agent.c b/source/n/bluez/passkey-agent.c
deleted file mode 100644
index 8ac91d27..00000000
--- a/source/n/bluez/passkey-agent.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- *
- *  BlueZ - Bluetooth protocol stack for Linux
- *
- *  Copyright (C) 2004-2008  Marcel Holtmann <marcel@holtmann.org>
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdio.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <getopt.h>
-#include <string.h>
-
-#include <dbus/dbus.h>
-
-#define INTERFACE "org.bluez.Security"
-
-static char *passkey = NULL;
-static char *address = NULL;
-
-static int do_reject = 0;
-
-static volatile sig_atomic_t __io_canceled = 0;
-static volatile sig_atomic_t __io_terminated = 0;
-
-static void sig_term(int sig)
-{
-	__io_canceled = 1;
-}
-
-static DBusHandlerResult agent_filter(DBusConnection *conn,
-						DBusMessage *msg, void *data)
-{
-	const char *name, *old, *new;
-
-	if (!dbus_message_is_signal(msg, DBUS_INTERFACE_DBUS, "NameOwnerChanged"))
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-
-	if (!dbus_message_get_args(msg, NULL,
-			DBUS_TYPE_STRING, &name, DBUS_TYPE_STRING, &old,
-				DBUS_TYPE_STRING, &new, DBUS_TYPE_INVALID)) {
-		fprintf(stderr, "Invalid arguments for NameOwnerChanged signal");
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-	}
-
-	if (!strcmp(name, "org.bluez") && *new == '\0') {
-		fprintf(stderr, "Passkey service has been terminated\n");
-		__io_terminated = 1;
-	}
-
-	return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-}
-
-static DBusHandlerResult request_message(DBusConnection *conn,
-						DBusMessage *msg, void *data)
-{
-	DBusMessage *reply;
-	const char *path, *address;
-	dbus_bool_t numeric;
-
-	if (!passkey)
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-
-	if (!dbus_message_get_args(msg, NULL,
-			DBUS_TYPE_STRING, &path, DBUS_TYPE_STRING, &address,
-			DBUS_TYPE_BOOLEAN, &numeric, DBUS_TYPE_INVALID)) {
-		fprintf(stderr, "Invalid arguments for passkey Request method");
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-	}
-
-	if (do_reject) {
-		reply = dbus_message_new_error(msg,
-					"org.bluez.Error.Rejected", "");
-		goto send;
-	}
-
-	reply = dbus_message_new_method_return(msg);
-	if (!reply) {
-		fprintf(stderr, "Can't create reply message\n");
-		return DBUS_HANDLER_RESULT_NEED_MEMORY;
-	}
-
-	printf("Passkey request for device %s\n", address);
-
-	dbus_message_append_args(reply, DBUS_TYPE_STRING, &passkey,
-					DBUS_TYPE_INVALID);
-
-send:
-	dbus_connection_send(conn, reply, NULL);
-
-	dbus_connection_flush(conn);
-
-	dbus_message_unref(reply);
-
-	return DBUS_HANDLER_RESULT_HANDLED;
-}
-
-static DBusHandlerResult cancel_message(DBusConnection *conn,
-						DBusMessage *msg, void *data)
-{
-	DBusMessage *reply;
-	const char *path, *address;
-
-	if (!dbus_message_get_args(msg, NULL,
-			DBUS_TYPE_STRING, &path, DBUS_TYPE_STRING, &address,
-							DBUS_TYPE_INVALID)) {
-		fprintf(stderr, "Invalid arguments for passkey Confirm method");
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-	}
-
-	printf("Request canceled for device %s\n", address);
-
-	reply = dbus_message_new_method_return(msg);
-	if (!reply) {
-		fprintf(stderr, "Can't create reply message\n");
-		return DBUS_HANDLER_RESULT_NEED_MEMORY;
-	}
-
-	dbus_connection_send(conn, reply, NULL);
-
-	dbus_connection_flush(conn);
-
-	dbus_message_unref(reply);
-
-	return DBUS_HANDLER_RESULT_HANDLED;
-}
-
-static DBusHandlerResult release_message(DBusConnection *conn,
-						DBusMessage *msg, void *data)
-{
-	DBusMessage *reply;
-
-	if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_INVALID)) {
-		fprintf(stderr, "Invalid arguments for passkey Release method");
-		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-	}
-
-	if (!__io_canceled)
-		fprintf(stderr, "Passkey service has been released\n");
-
-	__io_terminated = 1;
-
-	reply = dbus_message_new_method_return(msg);
-	if (!reply) {
-		fprintf(stderr, "Can't create reply message\n");
-		return DBUS_HANDLER_RESULT_NEED_MEMORY;
-	}
-
-	dbus_connection_send(conn, reply, NULL);
-
-	dbus_connection_flush(conn);
-
-	dbus_message_unref(reply);
-
-	return DBUS_HANDLER_RESULT_HANDLED;
-}
-
-static DBusHandlerResult agent_message(DBusConnection *conn,
-						DBusMessage *msg, void *data)
-{
-	if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Request"))
-		return request_message(conn, msg, data);
-
-	if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Cancel"))
-		return cancel_message(conn, msg, data);
-
-	if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Release"))
-		return release_message(conn, msg, data);
-
-	return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-}
-
-static const DBusObjectPathVTable agent_table = {
-	.message_function = agent_message,
-};
-
-static int register_agent(DBusConnection *conn, const char *agent_path,
-				const char *remote_address, int use_default)
-{
-	DBusMessage *msg, *reply;
-	DBusError err;
-	const char *path, *method, *address = remote_address;
-
-	if (!dbus_connection_register_object_path(conn, agent_path,
-							&agent_table, NULL)) {
-		fprintf(stderr, "Can't register object path for agent\n");
-		return -1;
-	}
-
-	if (use_default) {
-		path = "/org/bluez";
-		method = "RegisterDefaultPasskeyAgent";
-	} else {
-		path = "/org/bluez/hci0";
-		method = "RegisterPasskeyAgent";
-	}
-
-	msg = dbus_message_new_method_call("org.bluez", path, INTERFACE, method);
-	if (!msg) {
-		fprintf(stderr, "Can't allocate new method call\n");
-		return -1;
-	}
-
-	if (use_default)
-		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
-							DBUS_TYPE_INVALID);
-	else
-		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
-				DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID);
-
-	dbus_error_init(&err);
-
-	reply = dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);
-
-	dbus_message_unref(msg);
-
-	if (!reply) {
-		fprintf(stderr, "Can't register passkey agent\n");
-		if (dbus_error_is_set(&err)) {
-			fprintf(stderr, "%s\n", err.message);
-			dbus_error_free(&err);
-		}
-		return -1;
-	}
-
-	dbus_message_unref(reply);
-
-	dbus_connection_flush(conn);
-
-	return 0;
-}
-
-static int unregister_agent(DBusConnection *conn, const char *agent_path,
-				const char *remote_address, int use_default)
-{
-	DBusMessage *msg, *reply;
-	DBusError err;
-	const char *path, *method, *address = remote_address;
-
-	if (use_default) {
-		path = "/org/bluez";
-		method = "UnregisterDefaultPasskeyAgent";
-	} else {
-		path = "/org/bluez/hci0";
-		method = "UnregisterPasskeyAgent";
-	}
-
-	msg = dbus_message_new_method_call("org.bluez", path, INTERFACE, method);
-	if (!msg) {
-		fprintf(stderr, "Can't allocate new method call\n");
-		dbus_connection_unref(conn);
-		exit(1);
-	}
-
-	if (use_default)
-		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
-							DBUS_TYPE_INVALID);
-	else
-		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
-				DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID);
-
-	dbus_error_init(&err);
-
-	reply = dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);
-
-	dbus_message_unref(msg);
-
-	if (!reply) {
-		fprintf(stderr, "Can't unregister passkey agent\n");
-		if (dbus_error_is_set(&err)) {
-			fprintf(stderr, "%s\n", err.message);
-			dbus_error_free(&err);
-		}
-		return -1;
-	}
-
-	dbus_message_unref(reply);
-
-	dbus_connection_flush(conn);
-
-	dbus_connection_unregister_object_path(conn, agent_path);
-
-	return 0;
-}
-
-static void usage(void)
-{
-	printf("Bluetooth passkey agent ver %s\n\n", VERSION);
-
-	printf("Usage:\n"
-		"\tpasskey-agent [--default] [--path agent-path] <passkey> [address]\n"
-		"\n");
-}
-
-static struct option main_options[] = {
-	{ "default",	0, 0, 'd' },
-	{ "reject",	0, 0, 'r' },
-	{ "path",	1, 0, 'p' },
-	{ "help",	0, 0, 'h' },
-	{ 0, 0, 0, 0 }
-};
-
-int main(int argc, char *argv[])
-{
-	struct sigaction sa;
-	DBusConnection *conn;
-	char match_string[128], default_path[128], *agent_path = NULL;
-	int opt, use_default = 0;
-
-	snprintf(default_path, sizeof(default_path),
-				"/org/bluez/passkey_agent_%d", getpid());
-
-	while ((opt = getopt_long(argc, argv, "+dp:h", main_options, NULL)) != EOF) {
-		switch(opt) {
-		case 'd':
-			use_default = 1;
-			break;
-		case 'r':
-			do_reject = 1;
-			break;
-		case 'p':
-			if (optarg[0] != '/') {
-				fprintf(stderr, "Invalid path\n");
-				exit(1);
-			}
-			agent_path = strdup(optarg);
-			break;
-		case 'h':
-			usage();
-			exit(0);
-		default:
-			exit(1);
-		}
-	}
-
-	argc -= optind;
-	argv += optind;
-	optind = 0;
-
-	if (argc < 1) {
-		usage();
-		exit(1);
-	}
-
-	passkey = strdup(argv[0]);
-	address = (argc > 1) ? strdup(argv[1]) : NULL;
-
-	if (!use_default && !address) {
-		usage();
-		exit(1);
-	}
-
-	if (!agent_path)
-		agent_path = strdup(default_path);
-
-	conn = dbus_bus_get(DBUS_BUS_SYSTEM, NULL);
-	if (!conn) {
-		fprintf(stderr, "Can't get on system bus");
-		exit(1);
-	}
-
-	if (register_agent(conn, agent_path, address, use_default) < 0) {
-		dbus_connection_unref(conn);
-		exit(1);
-	}
-
-	if (!dbus_connection_add_filter(conn, agent_filter, NULL, NULL))
-		fprintf(stderr, "Can't add signal filter");
-
-	snprintf(match_string, sizeof(match_string),
-			"interface=%s,member=NameOwnerChanged,arg0=%s",
-					DBUS_INTERFACE_DBUS, "org.bluez");
-
-	dbus_bus_add_match(conn, match_string, NULL);
-
-	memset(&sa, 0, sizeof(sa));
-	sa.sa_flags   = SA_NOCLDSTOP;
-	sa.sa_handler = sig_term;
-	sigaction(SIGTERM, &sa, NULL);
-	sigaction(SIGINT,  &sa, NULL);
-
-	while (!__io_canceled && !__io_terminated) {
-		if (dbus_connection_read_write_dispatch(conn, 500) != TRUE)
-			break;
-	}
-
-	if (!__io_terminated)
-		unregister_agent(conn, agent_path, address, use_default);
-
-	if (passkey)
-		free(passkey);
-
-	dbus_connection_unref(conn);
-
-	return 0;
-}
diff --git a/source/n/bluez/patches/bluez-dbus-config.patch b/source/n/bluez/patches/bluez-dbus-config.patch
deleted file mode 100644
index 0d0fb462..00000000
--- a/source/n/bluez/patches/bluez-dbus-config.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- ./src/bluetooth.conf.orig	2010-10-04 06:41:01.000000000 -0500
-+++ ./src/bluetooth.conf	2010-11-07 19:50:47.229999322 -0600
-@@ -11,13 +11,18 @@
-     <allow own="org.bluez"/>
-     <allow send_destination="org.bluez"/>
-     <allow send_interface="org.bluez.Agent"/>
-+    <allow send_interface="org.bluez.Adapter"/>
-     <allow send_interface="org.bluez.HandsfreeAgent"/>
-     <allow send_interface="org.bluez.MediaEndpoint"/>
-     <allow send_interface="org.bluez.Watcher"/>
-   </policy>
- 
--  <policy at_console="true">
-+  <policy group="plugdev">
-     <allow send_destination="org.bluez"/>
-+    <allow send_interface="org.bluez.Agent"/>
-+    <allow send_interface="org.bluez.Adapter"/>
-+    <allow send_destination="org.bluez"
-+           send_interface="org.freedesktop.DBus.Introspectable"/>
-   </policy>
- 
-   <!-- allow users of lp group (printing subsystem) to 
diff --git a/source/n/bluez/patches/bluez-run_udev_helper.patch b/source/n/bluez/patches/bluez-run_udev_helper.patch
deleted file mode 100644
index 18860745..00000000
--- a/source/n/bluez/patches/bluez-run_udev_helper.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Instead of automatically starting the bluetooth subsystem when devices
-  are added, let's invoke a wrapper script in /lib/udev and have that
-  wrapper check whether /etc/rc.d/rc.bluetooth is executable first.
-
-diff -Nur bluez-4.59.orig/scripts/bluetooth.rules.in bluez-4.59/scripts/bluetooth.rules.in
---- bluez-4.59.orig/scripts/bluetooth.rules.in	2009-07-06 15:21:40.000000000 -0500
-+++ bluez-4.59/scripts/bluetooth.rules.in	2009-12-30 11:50:37.069164823 -0600
-@@ -1,3 +1,3 @@
- # Run helper every time a Bluetooth device appears
- # On remove actions, bluetoothd should go away by itself
--ACTION=="add", SUBSYSTEM=="bluetooth", RUN+="@prefix@/sbin/bluetoothd --udev"
-+ACTION=="add", SUBSYSTEM=="bluetooth", RUN+="/lib/udev/bluetooth.sh"
diff --git a/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch b/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch
deleted file mode 100644
index ec0b4a96..00000000
--- a/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-One of the Dell USB mice gets broken by this rule, so we'll unbreak it.
-
-diff -Nur bluez-4.59.orig/scripts/bluetooth-hid2hci.rules bluez-4.59/scripts/bluetooth-hid2hci.rules
---- bluez-4.59.orig/scripts/bluetooth-hid2hci.rules	2009-05-19 04:04:10.000000000 -0500
-+++ bluez-4.59/scripts/bluetooth-hid2hci.rules	2009-12-30 12:34:14.165164370 -0600
-@@ -8,7 +8,7 @@
- #   413c:8154
- #   413c:8158
- #   413c:8162
--ACTION=="add", ENV{ID_VENDOR}=="413c", ENV{ID_CLASS}=="mouse", ATTRS{bmAttributes}=="e0", KERNEL=="mouse*", RUN+="/usr/sbin/hid2hci --method dell -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci"
-+# ACTION=="add", ENV{ID_VENDOR}=="413c", ENV{ID_CLASS}=="mouse", ATTRS{bmAttributes}=="e0", KERNEL=="mouse*", RUN+="/usr/sbin/hid2hci --method dell -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci"
- 
- # Logitech devices
- ACTION=="add", ENV{ID_VENDOR}=="046d", ENV{ID_MODEL}=="c703" RUN+="/usr/sbin/hid2hci --method logitech -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci"
diff --git a/source/n/ca-certificates/ca-certificates.SlackBuild b/source/n/ca-certificates/ca-certificates.SlackBuild
index fc455b14..b3efd180 100755
--- a/source/n/ca-certificates/ca-certificates.SlackBuild
+++ b/source/n/ca-certificates/ca-certificates.SlackBuild
@@ -2,7 +2,8 @@
 
 # Slackware build script for ca-certificates
 
-# Copyright 2009  Robby Workman  Northport, AL, USA
+# Copyright 2009,2011  Robby Workman  Northport, AL, USA
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,9 +24,9 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=ca-certificates
-VERSION=${VERSION:-20090814}
+VERSION=${VERSION:-20120623}
 ARCH=noarch
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
@@ -44,9 +45,9 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-zcat $CWD/cacerts-$VERSION-remove_debconf.diff.gz | patch -p1 || exit 1
-zcat $CWD/cacerts-$VERSION-fixup_DESTDIR.diff.gz | patch -p1 || exit 1
-zcat $CWD/cacerts-$VERSION-fixup_update-ca-certificates.diff.gz | patch -p1 || exit 1
+zcat $CWD/patches/remove_debconf.diff.gz | patch -p1 || exit 1
+zcat $CWD/patches/fixup_DESTDIR.diff.gz | patch -p1 || exit 1
+zcat $CWD/patches/fixup_update-ca-certificates.diff.gz | patch -p1 || exit 1
 
 make || exit 1
 make install DESTDIR=$PKG || exit 1
@@ -65,7 +66,10 @@ gzip -9c sbin/update-ca-certificates.8 > \
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
 mv debian/NEWS debian/NEWS.Debian
 cp -a debian/NEWS.Debian debian/README.Debian $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/var/log/setup
+cat $CWD/setup.11.cacerts > $PKG/var/log/setup/setup.11.cacerts
+chmod 755 $PKG/var/log/setup/setup.11.cacerts
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/n/ca-certificates/cacerts-20090814-fixup_DESTDIR.diff b/source/n/ca-certificates/cacerts-20090814-fixup_DESTDIR.diff
deleted file mode 100644
index b70ca654..00000000
--- a/source/n/ca-certificates/cacerts-20090814-fixup_DESTDIR.diff
+++ /dev/null
@@ -1,94 +0,0 @@
-diff -Nur ca-certificates-20090814.orig/Makefile ca-certificates-20090814/Makefile
---- ca-certificates-20090814.orig/Makefile	2009-07-08 16:18:57.000000000 -0500
-+++ ca-certificates-20090814/Makefile	2009-12-17 00:48:14.499550845 -0600
-@@ -17,7 +17,7 @@
- 
- install:
- 	for dir in $(SUBDIRS); do \
--	  mkdir $(DESTDIR)/$(CERTSDIR)/$$dir; \
-+	  mkdir -p $(DESTDIR)/$(CERTSDIR)/$$dir; \
- 	  $(MAKE) -C $$dir install CERTSDIR=$(DESTDIR)/$(CERTSDIR)/$$dir; \
- 	done
- 	for dir in sbin; do \
-diff -Nur ca-certificates-20090814.orig/brasil.gov.br/Makefile ca-certificates-20090814/brasil.gov.br/Makefile
---- ca-certificates-20090814.orig/brasil.gov.br/Makefile	2007-02-02 00:23:19.000000000 -0600
-+++ ca-certificates-20090814/brasil.gov.br/Makefile	2009-12-17 00:48:14.499550845 -0600
-@@ -8,5 +8,6 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
-diff -Nur ca-certificates-20090814.orig/cacert.org/Makefile ca-certificates-20090814/cacert.org/Makefile
---- ca-certificates-20090814.orig/cacert.org/Makefile	2009-07-08 16:19:37.000000000 -0500
-+++ ca-certificates-20090814/cacert.org/Makefile	2009-12-17 00:48:14.499550845 -0600
-@@ -9,5 +9,6 @@
- 
- install:
- 	cat root.crt class3.crt > cacert.org.crt
-+	mkdir -p $(CERTSDIR)
- 	install -m 644 cacert.org.crt $(CERTSDIR)/cacert.org.crt
- 
-diff -Nur ca-certificates-20090814.orig/gouv.fr/Makefile ca-certificates-20090814/gouv.fr/Makefile
---- ca-certificates-20090814.orig/gouv.fr/Makefile	2008-06-23 13:57:45.000000000 -0500
-+++ ca-certificates-20090814/gouv.fr/Makefile	2009-12-17 00:48:14.500550426 -0600
-@@ -8,6 +8,7 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
- 
-diff -Nur ca-certificates-20090814.orig/mozilla/Makefile ca-certificates-20090814/mozilla/Makefile
---- ca-certificates-20090814.orig/mozilla/Makefile	2009-06-24 05:56:54.000000000 -0500
-+++ ca-certificates-20090814/mozilla/Makefile	2009-12-17 00:48:14.500550426 -0600
-@@ -10,5 +10,6 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
-diff -Nur ca-certificates-20090814.orig/sbin/Makefile ca-certificates-20090814/sbin/Makefile
---- ca-certificates-20090814.orig/sbin/Makefile	2007-02-02 00:23:19.000000000 -0600
-+++ ca-certificates-20090814/sbin/Makefile	2009-12-17 00:49:05.976571309 -0600
-@@ -8,4 +8,5 @@
- clean:
- 
- install:
-+	mkdir -p $(DESTDIR)/usr/sbin
- 	install -m755 update-ca-certificates $(DESTDIR)/usr/sbin/
-diff -Nur ca-certificates-20090814.orig/signet.pl/Makefile ca-certificates-20090814/signet.pl/Makefile
---- ca-certificates-20090814.orig/signet.pl/Makefile	2007-02-02 00:23:19.000000000 -0600
-+++ ca-certificates-20090814/signet.pl/Makefile	2009-12-17 00:48:14.501550915 -0600
-@@ -8,5 +8,6 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
-diff -Nur ca-certificates-20090814.orig/spi-inc.org/Makefile ca-certificates-20090814/spi-inc.org/Makefile
---- ca-certificates-20090814.orig/spi-inc.org/Makefile	2007-02-02 00:23:19.000000000 -0600
-+++ ca-certificates-20090814/spi-inc.org/Makefile	2009-12-17 00:48:14.501550915 -0600
-@@ -8,6 +8,7 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
- 
-diff -Nur ca-certificates-20090814.orig/telesec.de/Makefile ca-certificates-20090814/telesec.de/Makefile
---- ca-certificates-20090814.orig/telesec.de/Makefile	2008-03-19 09:03:09.000000000 -0500
-+++ ca-certificates-20090814/telesec.de/Makefile	2009-12-17 00:48:14.566586954 -0600
-@@ -8,6 +8,7 @@
- 
- install:
- 	for p in *.crt; do \
-+	 mkdir -p $(CERTSDIR) ; \
- 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
- 	done
- 
diff --git a/source/n/ca-certificates/cacerts-20090814-fixup_update-ca-certificates.diff b/source/n/ca-certificates/cacerts-20090814-fixup_update-ca-certificates.diff
deleted file mode 100644
index 3c9e08b4..00000000
--- a/source/n/ca-certificates/cacerts-20090814-fixup_update-ca-certificates.diff
+++ /dev/null
@@ -1,14 +0,0 @@
-diff -Nur ca-certificates-20090814.orig/sbin/update-ca-certificates ca-certificates-20090814/sbin/update-ca-certificates
---- ca-certificates-20090814.orig/sbin/update-ca-certificates	2009-07-08 16:23:12.000000000 -0500
-+++ ca-certificates-20090814/sbin/update-ca-certificates	2009-12-17 00:42:41.760550636 -0600
-@@ -148,9 +148,7 @@
- 
- HOOKSDIR=/etc/ca-certificates/update.d
- echo -n "Running hooks in $HOOKSDIR...."
--VERBOSE_ARG=
--[ "$verbose" = 0 ] || VERBOSE_ARG=--verbose
--eval run-parts $VERBOSE_ARG --test -- $HOOKSDIR | while read hook
-+eval run-parts $HOOKSDIR | while read hook
- do
-   ( cat $ADDED
-     cat $REMOVED ) | $hook || echo E: $hook exited with code $?.
diff --git a/source/n/ca-certificates/cacerts-20090814-remove_debconf.diff b/source/n/ca-certificates/cacerts-20090814-remove_debconf.diff
deleted file mode 100644
index c99aa2fa..00000000
--- a/source/n/ca-certificates/cacerts-20090814-remove_debconf.diff
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -Nur ca-certificates-20090814.orig/Makefile ca-certificates-20090814/Makefile
---- ca-certificates-20090814.orig/Makefile	2009-07-08 16:18:57.000000000 -0500
-+++ ca-certificates-20090814/Makefile	2009-12-17 00:44:30.540551055 -0600
-@@ -3,7 +3,7 @@
- #
- 
- CERTSDIR = /usr/share/ca-certificates
--SUBDIRS = spi-inc.org debconf.org mozilla cacert.org brasil.gov.br signet.pl telesec.de gouv.fr
-+SUBDIRS = spi-inc.org mozilla cacert.org brasil.gov.br signet.pl telesec.de gouv.fr
- 
- all:
- 	for dir in $(SUBDIRS); do \
diff --git a/source/n/ca-certificates/doinst.sh b/source/n/ca-certificates/doinst.sh
index e8cd8cce..cfd7d795 100644
--- a/source/n/ca-certificates/doinst.sh
+++ b/source/n/ca-certificates/doinst.sh
@@ -13,5 +13,7 @@ config() {
 
 config etc/ca-certificates.conf.new
 
-chroot . usr/sbin/update-ca-certificates --fresh 1>/dev/null 2>/dev/null
+if [ -x /usr/sbin/update-ca-certificates ]; then
+  /usr/sbin/update-ca-certificates --fresh 1> /dev/null 2> /dev/null
+fi
 
diff --git a/source/n/ca-certificates/patches/fixup_DESTDIR.diff b/source/n/ca-certificates/patches/fixup_DESTDIR.diff
new file mode 100644
index 00000000..291848f6
--- /dev/null
+++ b/source/n/ca-certificates/patches/fixup_DESTDIR.diff
@@ -0,0 +1,64 @@
+diff -Nur ca-certificates-20111211.orig/Makefile ca-certificates-20111211/Makefile
+--- ca-certificates-20111211.orig/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/Makefile	2011-12-17 23:05:37.590951594 -0600
+@@ -17,7 +17,7 @@
+ 
+ install:
+ 	for dir in $(SUBDIRS); do \
+-	  mkdir $(DESTDIR)/$(CERTSDIR)/$$dir; \
++	  mkdir -p $(DESTDIR)/$(CERTSDIR)/$$dir; \
+ 	  $(MAKE) -C $$dir install CERTSDIR=$(DESTDIR)/$(CERTSDIR)/$$dir; \
+ 	done
+ 	for dir in sbin; do \
+diff -Nur ca-certificates-20111211.orig/cacert.org/Makefile ca-certificates-20111211/cacert.org/Makefile
+--- ca-certificates-20111211.orig/cacert.org/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/cacert.org/Makefile	2011-12-17 23:06:16.927521153 -0600
+@@ -9,5 +9,6 @@
+ 
+ install:
+ 	cat root.crt class3.crt > cacert.org.crt
++	mkdir -p $(CERTSDIR)
+ 	install -m 644 cacert.org.crt $(CERTSDIR)/cacert.org.crt
+ 
+diff -Nur ca-certificates-20111211.orig/debconf.org/Makefile ca-certificates-20111211/debconf.org/Makefile
+--- ca-certificates-20111211.orig/debconf.org/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/debconf.org/Makefile	2011-12-17 23:06:27.118409644 -0600
+@@ -7,6 +7,7 @@
+ clean:
+ 
+ install:
++	mkdir -p $(CERTSDIR)
+ 	for p in *.crt; do \
+ 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
+ 	done
+diff -Nur ca-certificates-20111211.orig/mozilla/Makefile ca-certificates-20111211/mozilla/Makefile
+--- ca-certificates-20111211.orig/mozilla/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/mozilla/Makefile	2011-12-17 23:06:34.556328253 -0600
+@@ -9,6 +9,7 @@
+ 	-rm -f *.crt
+ 
+ install:
++	mkdir -p $(CERTSDIR)
+ 	for p in *.crt; do \
+ 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
+ 	done
+diff -Nur ca-certificates-20111211.orig/sbin/Makefile ca-certificates-20111211/sbin/Makefile
+--- ca-certificates-20111211.orig/sbin/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/sbin/Makefile	2011-12-17 23:07:03.841007810 -0600
+@@ -8,4 +8,5 @@
+ clean:
+ 
+ install:
++	mkdir -p $(DESTDIR)/usr/sbin
+ 	install -m755 update-ca-certificates $(DESTDIR)/usr/sbin/
+diff -Nur ca-certificates-20111211.orig/spi-inc.org/Makefile ca-certificates-20111211/spi-inc.org/Makefile
+--- ca-certificates-20111211.orig/spi-inc.org/Makefile	2011-12-11 13:54:02.000000000 -0600
++++ ca-certificates-20111211/spi-inc.org/Makefile	2011-12-17 23:08:18.499190893 -0600
+@@ -7,6 +7,7 @@
+ clean:
+ 
+ install:
++	mkdir -p $PKG/$(CERTSDIR)
+ 	for p in *.crt; do \
+ 	 install -m 644 $$p $(CERTSDIR)/$$p ; \
+ 	done
diff --git a/source/n/ca-certificates/patches/fixup_update-ca-certificates.diff b/source/n/ca-certificates/patches/fixup_update-ca-certificates.diff
new file mode 100644
index 00000000..8b0435b3
--- /dev/null
+++ b/source/n/ca-certificates/patches/fixup_update-ca-certificates.diff
@@ -0,0 +1,14 @@
+diff -Nur ca-certificates-20110502.orig//sbin/update-ca-certificates ca-certificates-20110502/sbin/update-ca-certificates
+--- ca-certificates-20110502.orig//sbin/update-ca-certificates	2009-07-08 16:23:12.000000000 -0500
++++ ca-certificates-20110502/sbin/update-ca-certificates	2011-07-05 17:37:01.842932741 -0500
+@@ -148,9 +148,7 @@
+ 
+ HOOKSDIR=/etc/ca-certificates/update.d
+ echo -n "Running hooks in $HOOKSDIR...."
+-VERBOSE_ARG=
+-[ "$verbose" = 0 ] || VERBOSE_ARG=--verbose
+-eval run-parts $VERBOSE_ARG --test -- $HOOKSDIR | while read hook
++eval run-parts $HOOKSDIR | while read hook
+ do
+   ( cat $ADDED
+     cat $REMOVED ) | $hook || echo E: $hook exited with code $?.
diff --git a/source/n/ca-certificates/patches/remove_debconf.diff b/source/n/ca-certificates/patches/remove_debconf.diff
new file mode 100644
index 00000000..58fce422
--- /dev/null
+++ b/source/n/ca-certificates/patches/remove_debconf.diff
@@ -0,0 +1,12 @@
+diff -Nur ca-certificates-20111211.orig/Makefile ca-certificates-20111211/Makefile
+--- ca-certificates-20111211.orig/Makefile	2011-12-17 23:10:21.709842750 -0600
++++ ca-certificates-20111211/Makefile	2011-12-17 23:10:10.096969815 -0600
+@@ -3,7 +3,7 @@
+ #
+ 
+ CERTSDIR = /usr/share/ca-certificates
+-SUBDIRS = mozilla cacert.org debconf.org spi-inc.org
++SUBDIRS = mozilla cacert.org spi-inc.org
+ 
+ all:
+ 	for dir in $(SUBDIRS); do \
diff --git a/source/n/ca-certificates/setup.11.cacerts b/source/n/ca-certificates/setup.11.cacerts
new file mode 100644
index 00000000..328b61c0
--- /dev/null
+++ b/source/n/ca-certificates/setup.11.cacerts
@@ -0,0 +1,3 @@
+#!/bin/sh
+#BLURB="Rebuild SSL certificate database."
+chroot . usr/sbin/update-ca-certificates --fresh 1> /dev/null 2> /dev/null
diff --git a/source/n/cifs-utils/cifs-utils.SlackBuild b/source/n/cifs-utils/cifs-utils.SlackBuild
new file mode 100755
index 00000000..ef91a541
--- /dev/null
+++ b/source/n/cifs-utils/cifs-utils.SlackBuild
@@ -0,0 +1,150 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=cifs-utils
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+zcat $CWD/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS TODO \
+  doc/linux-cifs-client-guide.odt \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/cifs-utils/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch b/source/n/cifs-utils/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch
new file mode 100644
index 00000000..a8dd96c4
--- /dev/null
+++ b/source/n/cifs-utils/mount.cifs-set-rc-to-0-in-libcap-toggle_dac_capabili.patch
@@ -0,0 +1,38 @@
+From 0eb3daa4b17ee64b464594f1a5d413ecb364957c Mon Sep 17 00:00:00 2001
+From: Jeff Layton <jlayton@samba.org>
+Date: Thu, 14 Jun 2012 10:59:18 -0400
+Subject: [PATCH] mount.cifs: set rc to 0 in libcap toggle_dac_capability
+
+Thus spake Jochen:
+
+The mount.cifs program from the cifs-utils package 5.5 did not work on
+my Linux system. It just exited without an error message and did not
+mount anything.
+
+[...]
+
+I think, when this variable rc is now used in this function, it has also
+to be properly initialized there.
+
+Reported-by: Jochen Roderburg <roderburg@uni-koeln.de>
+Signed-off-by: Jeff Layton <jlayton@samba.org>
+---
+ mount.cifs.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/mount.cifs.c b/mount.cifs.c
+index a1b0454..6f3f382 100644
+--- a/mount.cifs.c
++++ b/mount.cifs.c
+@@ -495,7 +495,7 @@ free_caps:
+ static int
+ toggle_dac_capability(int writable, int enable)
+ {
+-	int rc;
++	int rc = 0;
+ 	cap_t caps;
+ 	cap_value_t capability = writable ? CAP_DAC_OVERRIDE : CAP_DAC_READ_SEARCH;
+ 
+-- 
+1.7.11
+
diff --git a/source/n/cifs-utils/slack-desc b/source/n/cifs-utils/slack-desc
new file mode 100644
index 00000000..ff9ba3e8
--- /dev/null
+++ b/source/n/cifs-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+cifs-utils: cifs-utils (CIFS filesystem utilities)
+cifs-utils:
+cifs-utils: This is the release version of cifs-utils, a package of utilities for
+cifs-utils: doing and managing mounts of the Linux CIFS filesystem.  The in-kernel
+cifs-utils: CIFS filesystem is generally the preferred method for mounting
+cifs-utils: SMB/CIFS shares on Linux.  This filesystem relies on a set of
+cifs-utils: user-space tools that were originally part of Samba, but have now been
+cifs-utils: split off into this separate package.
+cifs-utils:
+cifs-utils: Home page:  http://wiki.samba.org/index.php/LinuxCIFS_utils
+cifs-utils:
diff --git a/source/n/curl/cacert-fetch.sh b/source/n/curl/cacert-fetch.sh
new file mode 100755
index 00000000..d0f156e2
--- /dev/null
+++ b/source/n/curl/cacert-fetch.sh
@@ -0,0 +1 @@
+lftpget http://curl.haxx.se/ca/cacert.pem && rm cacert.pem.bz2 && bzip2 -9 cacert.pem
diff --git a/source/n/curl/cacert.pem b/source/n/curl/cacert.pem
index af135450..1fccb3dd 100644
--- a/source/n/curl/cacert.pem
+++ b/source/n/curl/cacert.pem
@@ -1,12 +1,12 @@
 ##
-## lib/ca-bundle.crt -- Bundle of CA Root Certificates
+## ca-bundle.crt -- Bundle of CA Root Certificates
 ##
-## Converted at: Tue Mar 29 19:30:29 2011 UTC
+## Certificate data from Mozilla as of: Wed Apr 25 15:02:13 2012
 ##
 ## This is a bundle of X.509 certificates of public Certificate Authorities
 ## (CA). These were automatically extracted from Mozilla's root certificates
 ## file (certdata.txt).  This file can be found in the mozilla source tree:
-## '/mozilla/security/nss/lib/ckfw/builtins/certdata.txt'
+## http://mxr.mozilla.org/mozilla/source/security/nss/lib/ckfw/builtins/certdata.txt?raw=1
 ##
 ## It contains the certificates in PEM format and therefore
 ## can be directly used with curl / libcurl / php_curl, or with
@@ -14,42 +14,7 @@
 ## Just configure this file as the SSLCACertificateFile.
 ##
 
-# ***** BEGIN LICENSE BLOCK *****
-# Version: MPL 1.1/GPL 2.0/LGPL 2.1
-#
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-# for the specific language governing rights and limitations under the
-# License.
-#
-# The Original Code is the Netscape security libraries.
-#
-# The Initial Developer of the Original Code is
-# Netscape Communications Corporation.
-# Portions created by the Initial Developer are Copyright (C) 1994-2000
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#
-# Alternatively, the contents of this file may be used under the terms of
-# either the GNU General Public License Version 2 or later (the "GPL"), or
-# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-# in which case the provisions of the GPL or the LGPL are applicable instead
-# of those above. If you wish to allow use of your version of this file only
-# under the terms of either the GPL or the LGPL, and not to allow others to
-# use your version of this file under the terms of the MPL, indicate your
-# decision by deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL or the LGPL. If you do not delete
-# the provisions above, a recipient may use your version of this file under
-# the terms of any one of the MPL, the GPL or the LGPL.
-#
-# ***** END LICENSE BLOCK *****
-# @(#) $RCSfile: certdata.txt,v $ $Revision: 1.70 $ $Date: 2010/12/02 23:26:19 $
+# @(#) $RCSfile: certdata.txt,v $ $Revision: 1.83 $ $Date: 2012/04/25 14:49:29 $
 
 GTE CyberTrust Global Root
 ==========================
@@ -67,26 +32,6 @@ M4ETCJ57NE7fQMh017l93PR2VX2bY1QY6fDq81yx2YtCHrnAlU66+tXifPVoYb+O7AWXX1uw16OF
 NMQkpw0PlZPvy5TYnh+dXIVtx6quTx8itc2VrbqnzPmrC3p/
 -----END CERTIFICATE-----
 
-Thawte Personal Freemail CA
-===========================
------BEGIN CERTIFICATE-----
-MIIDLTCCApagAwIBAgIBADANBgkqhkiG9w0BAQQFADCB0TELMAkGA1UEBhMCWkExFTATBgNVBAgT
-DFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMRowGAYDVQQKExFUaGF3dGUgQ29uc3Vs
-dGluZzEoMCYGA1UECxMfQ2VydGlmaWNhdGlvbiBTZXJ2aWNlcyBEaXZpc2lvbjEkMCIGA1UEAxMb
-VGhhd3RlIFBlcnNvbmFsIEZyZWVtYWlsIENBMSswKQYJKoZIhvcNAQkBFhxwZXJzb25hbC1mcmVl
-bWFpbEB0aGF3dGUuY29tMB4XDTk2MDEwMTAwMDAwMFoXDTIwMTIzMTIzNTk1OVowgdExCzAJBgNV
-BAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEaMBgGA1UE
-ChMRVGhhd3RlIENvbnN1bHRpbmcxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2
-aXNpb24xJDAiBgNVBAMTG1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBDQTErMCkGCSqGSIb3DQEJ
-ARYccGVyc29uYWwtZnJlZW1haWxAdGhhd3RlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC
-gYEA1GnX1LCUZFtx6UfYDFG26nKRsIRefS0Nj3sS34UldSh0OkIsYyeflXtL734Zhx2G6qPduc6W
-ZBrCFG5ErHzmj+hND3EfQDimAKOHePb5lIZererAXnbr2RSjXW56fAylS1V/Bhkpf56aJtVquzgk
-CGqYx7Hao5iR/Xnb5VrEHLkCAwEAAaMTMBEwDwYDVR0TAQH/BAUwAwEB/zANBgkqhkiG9w0BAQQF
-AAOBgQDH7JJ+Tvj1lqVnYiqk8E0RYNBvjWBYYawmu1I1XAjPMPuoSpaKH2JCI4wXD/S6ZJwXrEcp
-352YXtJsYHFcoqzceePnbgBHH7UNKOgCneSa/RP0ptl8sfjcXyMmCZGAc9AUG95DqYMl8uacLxXK
-/qarigd1iwzdUYRr5PjRzneigQ==
------END CERTIFICATE-----
-
 Thawte Server CA
 ================
 -----BEGIN CERTIFICATE-----
@@ -186,38 +131,6 @@ up/1902lMXucKS1M/mQ+7LZT/uqb7YLbdHVLB3luHtgZg3Pe9T7Qtd7nS2h9Qy4qIOF+oHhEngj1
 mPnHfxsb1gYgAlihw6ID
 -----END CERTIFICATE-----
 
-Verisign Class 1 Public Primary Certification Authority
-=======================================================
------BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQDNun9W8N/kvFT+IqyzcqpVMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMSBQdWJsaWMgUHJpbWFy
-eSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBaFw0yODA4MDEyMzU5NTla
-MF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3Mg
-MSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEF
-AAOBjQAwgYkCgYEA5Rm/baNWYS2ZSHH2Z965jeu3noaACpEO+jglr0aIguVzqKCbJF0NH8xlbgyw
-0FaEGIeaBpsQoXPftFg5a27B9hXVqKg/qhIGjTGsf7A01480Z4gJzRQR4k5FVmkfeAKA2txHkSm7
-NsljXMXg1y2He6G3MrB7MLoqLzGq7qNn2tsCAwEAATANBgkqhkiG9w0BAQIFAAOBgQBMP7iLxmjf
-7kMzDl3ppssHhE16M/+SG/Q2rdiVIjZoEWx8QszznC7EBz8UsA9P/5CSdvnivErpj82ggAr3xSnx
-giJduLHdgSOjeyUVRjB5FvjqBUuUfx3CHMjjt/QQQDwTw18fU+hI5Ia0e6E1sHslurjTjqs/OJ0A
-NACY89FxlA==
------END CERTIFICATE-----
-
-Verisign Class 2 Public Primary Certification Authority
-=======================================================
------BEGIN CERTIFICATE-----
-MIICPDCCAaUCEC0b/EoXjaOR6+f/9YtFvgswDQYJKoZIhvcNAQECBQAwXzELMAkGA1UEBhMCVVMx
-FzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAyIFB1YmxpYyBQcmltYXJ5
-IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVow
-XzELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAy
-IFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUA
-A4GNADCBiQKBgQC2WoujDWojg4BrzzmH9CETMwZMJaLtVRKXxaeAufqDwSCg+i8VDXyhYGt+eSz6
-Bg86rvYbb7HS/y8oUl+DfUvEerf4Zh+AVPy3wo5ZShRXRtGak75BkQO7FYCTXOvnzAhsPz6zSvz/
-S2wj1VCCJkQZjiPDceoZJEcEnnW/yKYAHwIDAQABMA0GCSqGSIb3DQEBAgUAA4GBAIobK/o5wXTX
-XtgZZKJYSi034DNHD6zt96rbHuSLBlxgJ8pFUs4W7z8GZOeUaHxgMxURaa+dYo2jA1Rrpr7l7gUY
-YAS/QoD90KioHgE796Ncr6Pc5iaAIzy4RHT3Cq5Ji2F4zCS/iIqnDupzGUH9TQPwiNHleI2lKk/2
-lw0Xd8rY
------END CERTIFICATE-----
-
 Verisign Class 3 Public Primary Certification Authority
 =======================================================
 -----BEGIN CERTIFICATE-----
@@ -234,44 +147,6 @@ WM1pF+NEHJwZRDmJXNycAA9WjQKZ7aKQRUzkuxCkPfAyAw7xzvjoyVGM5mKf5p/AfbdynMk2Omuf
 Tqj/ZA1k
 -----END CERTIFICATE-----
 
-Verisign Class 1 Public Primary Certification Authority - G2
-============================================================
------BEGIN CERTIFICATE-----
-MIIDAjCCAmsCEEzH6qqYPnHTkxD4PTqJkZIwDQYJKoZIhvcNAQEFBQAwgcExCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMSBQdWJsaWMgUHJpbWFy
-eSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2ln
-biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVz
-dCBOZXR3b3JrMB4XDTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMSBQdWJsaWMgUHJpbWFy
-eSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2ln
-biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVz
-dCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCq0Lq+Fi24g9TK0g+8djHKlNgd
-k4xWArzZbxpvUjZudVYKVdPfQ4chEWWKfo+9Id5rMj8bhDSVBZ1BNeuS65bdqlk/AVNtmU/t5eIq
-WpDBucSmFc/IReumXY6cPvBkJHalzasab7bYe1FhbqZ/h8jit+U03EGI6glAvnOSPWvndQIDAQAB
-MA0GCSqGSIb3DQEBBQUAA4GBAKlPww3HZ74sy9mozS11534Vnjty637rXC0Jh9ZrbWB85a7FkCMM
-XErQr7Fd88e2CtvgFZMN3QO8x3aKtd1Pw5sTdbgBwObJW2uluIncrKTdcu1OofdPvAbT6shkdHvC
-lUGcZXNY8ZCaPGqxmMnEh7zPRW1F4m4iP/68DzFc6PLZ
------END CERTIFICATE-----
-
-Verisign Class 2 Public Primary Certification Authority - G2
-============================================================
------BEGIN CERTIFICATE-----
-MIIDAzCCAmwCEQC5L2DMiJ+hekYJuFtwbIqvMA0GCSqGSIb3DQEBBQUAMIHBMQswCQYDVQQGEwJV
-UzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0NsYXNzIDIgUHVibGljIFByaW1h
-cnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMjE6MDgGA1UECxMxKGMpIDE5OTggVmVyaVNp
-Z24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1
-c3QgTmV0d29yazAeFw05ODA1MTgwMDAwMDBaFw0yODA4MDEyMzU5NTlaMIHBMQswCQYDVQQGEwJV
-UzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0NsYXNzIDIgUHVibGljIFByaW1h
-cnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMjE6MDgGA1UECxMxKGMpIDE5OTggVmVyaVNp
-Z24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1
-c3QgTmV0d29yazCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAp4gBIXQs5xoD8JjhlzwPIQjx
-nNuX6Zr8wgQGE75fUsjMHiwSViy4AWkszJkfrbCWrnkE8hM5wXuYuggs6MKEEyyqaekJ9MepAqRC
-wiNPStjwDqL7MWzJ5m+ZJwf15vRMeJ5t60aG+rmGyVTyssSv1EYcWskVMP8NbPUtDm3Of3cCAwEA
-ATANBgkqhkiG9w0BAQUFAAOBgQByLvl/0fFx+8Se9sVeUYpAmLho+Jscg9jinb3/7aHmZuovCfTK
-1+qlK5X2JGCGTUQug6XELaDTrnhpb3LabK4I8GOSN+a7xDAXrXfMSTWqz9iP0b63GJZHc2pUIjRk
-LbYWm1lbtFFZOrMLFPQS32eg9K0yZF6xRnInjBJ7xUS0rg==
------END CERTIFICATE-----
-
 Verisign Class 3 Public Primary Certification Authority - G2
 ============================================================
 -----BEGIN CERTIFICATE-----
@@ -291,25 +166,6 @@ MA0GCSqGSIb3DQEBBQUAA4GBAFFNzb5cy5gZnBWyATl4Lk0PZ3BwmcYQWpSkU01UbSuvDV1Ai2TT
 Oaxxp5EJb+RxBrO6WVcmeQD2+A2iMzAo1KpYoJ2daZH9
 -----END CERTIFICATE-----
 
-Verisign Class 4 Public Primary Certification Authority - G2
-============================================================
------BEGIN CERTIFICATE-----
-MIIDAjCCAmsCEDKIjprS9esTR/h/xCA3JfgwDQYJKoZIhvcNAQEFBQAwgcExCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgNCBQdWJsaWMgUHJpbWFy
-eSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2ln
-biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVz
-dCBOZXR3b3JrMB4XDTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgNCBQdWJsaWMgUHJpbWFy
-eSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2ln
-biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVz
-dCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC68OTP+cSuhVS5B1f5j8V/aBH4
-xBewRNzjMHPVKmIquNDMHO0oW369atyzkSTKQWI8/AIBvxwWMZQFl3Zuoq29YRdsTjCG8FE3KlDH
-qGKB3FtKqsGgtG7rL+VXxbErQHDbWk2hjh+9Ax/YA9SPTJlxvOKCzFjomDqG04Y48wApHwIDAQAB
-MA0GCSqGSIb3DQEBBQUAA4GBAIWMEsGnuVAVess+rLhDityq3RS6iYF+ATwjcSGIL4LcY/oCRaxF
-WdcqWERbt5+BO5JoPeI3JPV7bI92NZYJqFmduc4jq3TWg/0ycyfYaT5DdPauxYma51N86Xv2S/PB
-ZYPejYqcPIiNOVn8qj8ijaHBZlCBckztImRPT8qAkbYp
------END CERTIFICATE-----
-
 GlobalSign Root CA
 ==================
 -----BEGIN CERTIFICATE-----
@@ -410,54 +266,6 @@ V9+vqDWzf4mH6eglkrh/hXqu1rweN1gqZ8mRzyqBPu3GOd/APhmcGcwTTYJBtYze4D1gCCAPRX5r
 on+jjBXu
 -----END CERTIFICATE-----
 
-Verisign Class 1 Public Primary Certification Authority - G3
-============================================================
------BEGIN CERTIFICATE-----
-MIIEGjCCAwICEQCLW3VWhFSFCwDPrzhIzrGkMA0GCSqGSIb3DQEBBQUAMIHKMQswCQYDVQQGEwJV
-UzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWduIFRydXN0IE5ldHdv
-cmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNl
-IG9ubHkxRTBDBgNVBAMTPFZlcmlTaWduIENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNh
-dGlvbiBBdXRob3JpdHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQsw
-CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWduIFRy
-dXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJbmMuIC0gRm9yIGF1dGhv
-cml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWduIENsYXNzIDEgUHVibGljIFByaW1hcnkg
-Q2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
-ggEBAN2E1Lm0+afY8wR4nN493GwTFtl63SRRZsDHJlkNrAYIwpTRMx/wgzUfbhvI3qpuFU5UJ+/E
-bRrsC+MO8ESlV8dAWB6jRx9x7GD2bZTIGDnt/kIYVt/kTEkQeE4BdjVjEjbdZrwBBDajVWjVojYJ
-rKshJlQGrT/KFOCsyq0GHZXi+J3x4GD/wn91K0zM2v6HmSHquv4+VNfSWXjbPG7PoBMAGrgnoeS+
-Z5bKoMWznN3JdZ7rMJpfo83ZrngZPyPpXNspva1VyBtUjGP26KbqxzcSXKMpHgLZ2x87tNcPVkeB
-FQRKr4Mn0cVYiMHd9qqnoxjaaKptEVHhv2Vrn5Z20T0CAwEAATANBgkqhkiG9w0BAQUFAAOCAQEA
-q2aN17O6x5q25lXQBfGfMY1aqtmqRiYPce2lrVNWYgFHKkTp/j90CxObufRNG7LRX7K20ohcs5/N
-y9Sn2WCVhDr4wTcdYcrnsMXlkdpUpqwxga6X3s0IrLjAl4B/bnKk52kTlWUfxJM8/XmPBNQ+T+r3
-ns7NZ3xPZQL/kYVUc8f/NveGLezQXk//EZ9yBta4GvFMDSZl4kSAHsef493oCtrspSCAaWihT37h
-a88HQfqDjrw43bAuEbFrskLMmrz5SCJ5ShkPshw+IHTZasO+8ih4E1Z5T21Q6huwtVexN2ZYI/Pc
-D98Kh8TvhgXVOBRgmaNL3gaWcSzy27YfpO8/7g==
------END CERTIFICATE-----
-
-Verisign Class 2 Public Primary Certification Authority - G3
-============================================================
------BEGIN CERTIFICATE-----
-MIIEGTCCAwECEGFwy0mMX5hFKeewptlQW3owDQYJKoZIhvcNAQEFBQAwgcoxCzAJBgNVBAYTAlVT
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29y
-azE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ug
-b25seTFFMEMGA1UEAxM8VmVyaVNpZ24gQ2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0
-aW9uIEF1dGhvcml0eSAtIEczMB4XDTk5MTAwMTAwMDAwMFoXDTM2MDcxNjIzNTk1OVowgcoxCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1
-c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9y
-aXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNpZ24gQ2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBD
-ZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEczMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKC
-AQEArwoNwtUs22e5LeWUJ92lvuCwTY+zYVY81nzD9M0+hsuiiOLh2KRpxbXiv8GmR1BeRjmL1Za6
-tW8UvxDOJxOeBUebMXoT2B/Z0wI3i60sR/COgQanDTAM6/c8DyAd3HJG7qUCyFvDyVZpTMUYwZF7
-C9UTAJu878NIPkZgIIUq1ZC2zYugzDLdt/1AVbJQHFauzI13TccgTacxdu9okoqQHgiBVrKtaaNS
-0MscxCM9H5n+TOgWY47GCI72MfbS+uV23bUckqNJzc0BzWjNqWm6o+sdDZykIKbBoMXRRkwXbdKs
-Zj+WjOCE1Db/IlnF+RFgqF8EffIa9iVCYQ/ESrg+iQIDAQABMA0GCSqGSIb3DQEBBQUAA4IBAQA0
-JhU8wI1NQ0kdvekhktdmnLfexbjQ5F1fdiLAJvmEOjr5jLX77GDx6M4EsMjdpwOPMPOY36TmpDHf
-0xwLRtxyID+u7gU8pDM/CzmscHhzS5kr3zDCVLCoO1Wh/hYozUK9dG6A2ydEp85EXdQbkJgNHkKU
-sQAsBNB0owIFImNjzYO1+8FtYmtpdf1dcEG59b98377BMnMiIYtYgXsVkXq642RIsH/7NiXaldDx
-JBQX3RiAa0YjOVT1jmIJBB2UkKab5iXiQkWquJCtvgiPqQtCGJTPcjnhsUPgKM+351psE2tJs//j
-GHyJizNdrDPXp/naOlXJWBD5qu9ats9LS98q
------END CERTIFICATE-----
-
 Verisign Class 3 Public Primary Certification Authority - G3
 ============================================================
 -----BEGIN CERTIFICATE-----
@@ -533,34 +341,6 @@ Ewr75Ji174z4xRAN95K+8cPV1ZVqBLssziY2ZcgxxufuP+NXdYR6Ee9GTxj005i7qIcyunL2POI9
 n9cd2cNgQ4xYDiKWL2KjLB+6rQXvqzJ4h6BUcxm1XAX5Uj5tLUUL9wqT6u0G+bI=
 -----END CERTIFICATE-----
 
-Entrust.net Secure Personal CA
-==============================
------BEGIN CERTIFICATE-----
-MIIE7TCCBFagAwIBAgIEOAOR7jANBgkqhkiG9w0BAQQFADCByTELMAkGA1UEBhMCVVMxFDASBgNV
-BAoTC0VudHJ1c3QubmV0MUgwRgYDVQQLFD93d3cuZW50cnVzdC5uZXQvQ2xpZW50X0NBX0luZm8v
-Q1BTIGluY29ycC4gYnkgcmVmLiBsaW1pdHMgbGlhYi4xJTAjBgNVBAsTHChjKSAxOTk5IEVudHJ1
-c3QubmV0IExpbWl0ZWQxMzAxBgNVBAMTKkVudHJ1c3QubmV0IENsaWVudCBDZXJ0aWZpY2F0aW9u
-IEF1dGhvcml0eTAeFw05OTEwMTIxOTI0MzBaFw0xOTEwMTIxOTU0MzBaMIHJMQswCQYDVQQGEwJV
-UzEUMBIGA1UEChMLRW50cnVzdC5uZXQxSDBGBgNVBAsUP3d3dy5lbnRydXN0Lm5ldC9DbGllbnRf
-Q0FfSW5mby9DUFMgaW5jb3JwLiBieSByZWYuIGxpbWl0cyBsaWFiLjElMCMGA1UECxMcKGMpIDE5
-OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5uZXQgQ2xpZW50IENlcnRp
-ZmljYXRpb24gQXV0aG9yaXR5MIGdMA0GCSqGSIb3DQEBAQUAA4GLADCBhwKBgQDIOpleMRffrCdv
-kHvkGf9FozTC28GoT/Bo6oT9n3V5z8GKUZSvx1cDR2SerYIbWtp/N3hHuzeYEpbOxhN979IMMFGp
-OZ5V+Pux5zDeg7K6PvHViTs7hbqqdCz+PzFur5GVbgbUB01LLFZHGARS2g4Qk79jkJvh34zmAqTm
-T173iwIBA6OCAeAwggHcMBEGCWCGSAGG+EIBAQQEAwIABzCCASIGA1UdHwSCARkwggEVMIHkoIHh
-oIHepIHbMIHYMQswCQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxSDBGBgNVBAsUP3d3
-dy5lbnRydXN0Lm5ldC9DbGllbnRfQ0FfSW5mby9DUFMgaW5jb3JwLiBieSByZWYuIGxpbWl0cyBs
-aWFiLjElMCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50
-cnVzdC5uZXQgQ2xpZW50IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MQ0wCwYDVQQDEwRDUkwxMCyg
-KqAohiZodHRwOi8vd3d3LmVudHJ1c3QubmV0L0NSTC9DbGllbnQxLmNybDArBgNVHRAEJDAigA8x
-OTk5MTAxMjE5MjQzMFqBDzIwMTkxMDEyMTkyNDMwWjALBgNVHQ8EBAMCAQYwHwYDVR0jBBgwFoAU
-xPucKXuXzUyW/O5bs8qZdIuV6kwwHQYDVR0OBBYEFMT7nCl7l81MlvzuW7PKmXSLlepMMAwGA1Ud
-EwQFMAMBAf8wGQYJKoZIhvZ9B0EABAwwChsEVjQuMAMCBJAwDQYJKoZIhvcNAQEEBQADgYEAP66K
-8ddmAwWePvrqHEa7pFuPeJoSSJn59DXeDDYHAmsQOokUgZwxpnyyQbJq5wcBoUv5nyU7lsqZwz6h
-URzzwy5E97BnRqqS5TvaHBkUODDV4qIxJS7x7EU47fgGWANzYrAQMY9Av2TgXD7FTx/aEkP/TOYG
-JqibGapEPHayXOw=
------END CERTIFICATE-----
-
 Entrust.net Premium 2048 Secure Server CA
 =========================================
 -----BEGIN CERTIFICATE-----
@@ -757,75 +537,6 @@ RXEwMn8bLgn5v1Kh7sKAPgZcLlVAwRv1cEWw3F369nJad9Jjzc9YiQBCYz95OdBEsIJuQRno3eDB
 iFrRHnGTHyQwdOUeqN48Jzd/g66ed8/wMLH/S5noxqE=
 -----END CERTIFICATE-----
 
-Thawte Time Stamping CA
-=======================
------BEGIN CERTIFICATE-----
-MIICoTCCAgqgAwIBAgIBADANBgkqhkiG9w0BAQQFADCBizELMAkGA1UEBhMCWkExFTATBgNVBAgT
-DFdlc3Rlcm4gQ2FwZTEUMBIGA1UEBxMLRHVyYmFudmlsbGUxDzANBgNVBAoTBlRoYXd0ZTEdMBsG
-A1UECxMUVGhhd3RlIENlcnRpZmljYXRpb24xHzAdBgNVBAMTFlRoYXd0ZSBUaW1lc3RhbXBpbmcg
-Q0EwHhcNOTcwMTAxMDAwMDAwWhcNMjAxMjMxMjM1OTU5WjCBizELMAkGA1UEBhMCWkExFTATBgNV
-BAgTDFdlc3Rlcm4gQ2FwZTEUMBIGA1UEBxMLRHVyYmFudmlsbGUxDzANBgNVBAoTBlRoYXd0ZTEd
-MBsGA1UECxMUVGhhd3RlIENlcnRpZmljYXRpb24xHzAdBgNVBAMTFlRoYXd0ZSBUaW1lc3RhbXBp
-bmcgQ0EwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANYrWHhhRYZT6jR7UZztsOYuGA7+4F+o
-J9O0yeB8WU4WDnNUYMF/9p8u6TqFJBU820cEY8OexJQaWt9MevPZQx08EHp5JduQ/vBR5zDWQQD9
-nyjfeb6Uu522FOMjhdepQeBMpHmwKxqL8vg7ij5FrHGSALSQQZj7X+36ty6K+Ig3AgMBAAGjEzAR
-MA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEAZ9viwuaHPUCDhjc1fR/OmsMMZiCo
-uqoEiYbC9RAIDb/LogWK0E02PvTX72nGXuSwlG9KuefeW4i2e9vjJ+V2w/A1wcu1J5szedyQpgCe
-d/r8zSeUQhac0xxo7L9c3eWpexAKMnRUEzGLhQOEkbdYATAUOK8oyvyxUBkZCayJSdM=
------END CERTIFICATE-----
-
-Entrust.net Global Secure Server CA
-===================================
------BEGIN CERTIFICATE-----
-MIIElTCCA/6gAwIBAgIEOJsRPDANBgkqhkiG9w0BAQQFADCBujEUMBIGA1UEChMLRW50cnVzdC5u
-ZXQxPzA9BgNVBAsUNnd3dy5lbnRydXN0Lm5ldC9TU0xfQ1BTIGluY29ycC4gYnkgcmVmLiAobGlt
-aXRzIGxpYWIuKTElMCMGA1UECxMcKGMpIDIwMDAgRW50cnVzdC5uZXQgTGltaXRlZDE6MDgGA1UE
-AxMxRW50cnVzdC5uZXQgU2VjdXJlIFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw0w
-MDAyMDQxNzIwMDBaFw0yMDAyMDQxNzUwMDBaMIG6MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDE/MD0G
-A1UECxQ2d3d3LmVudHJ1c3QubmV0L1NTTF9DUFMgaW5jb3JwLiBieSByZWYuIChsaW1pdHMgbGlh
-Yi4pMSUwIwYDVQQLExwoYykgMjAwMCBFbnRydXN0Lm5ldCBMaW1pdGVkMTowOAYDVQQDEzFFbnRy
-dXN0Lm5ldCBTZWN1cmUgU2VydmVyIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3
-DQEBAQUAA4GNADCBiQKBgQDHwV9OcfHO8GCGD9JYf9Mzly0XonUwtZZkJi9ow0SrqHXmAGc0V55l
-xyKbc+bT3QgON1WqJUaBbL3+qPZ1V1eMkGxKwz6LS0MKyRFWmponIpnPVZ5h2QLifLZ8OAfc439P
-mrkDQYC2dWcTC5/oVzbIXQA23mYU2m52H083jIITiQIDAQABo4IBpDCCAaAwEQYJYIZIAYb4QgEB
-BAQDAgAHMIHjBgNVHR8EgdswgdgwgdWggdKggc+kgcwwgckxFDASBgNVBAoTC0VudHJ1c3QubmV0
-MT8wPQYDVQQLFDZ3d3cuZW50cnVzdC5uZXQvU1NMX0NQUyBpbmNvcnAuIGJ5IHJlZi4gKGxpbWl0
-cyBsaWFiLikxJTAjBgNVBAsTHChjKSAyMDAwIEVudHJ1c3QubmV0IExpbWl0ZWQxOjA4BgNVBAMT
-MUVudHJ1c3QubmV0IFNlY3VyZSBTZXJ2ZXIgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxDTALBgNV
-BAMTBENSTDEwKwYDVR0QBCQwIoAPMjAwMDAyMDQxNzIwMDBagQ8yMDIwMDIwNDE3NTAwMFowCwYD
-VR0PBAQDAgEGMB8GA1UdIwQYMBaAFMtswGvjuz7L/CKc/vuLkpyw8m4iMB0GA1UdDgQWBBTLbMBr
-47s+y/winP77i5KcsPJuIjAMBgNVHRMEBTADAQH/MB0GCSqGSIb2fQdBAAQQMA4bCFY1LjA6NC4w
-AwIEkDANBgkqhkiG9w0BAQQFAAOBgQBi24GRzsiad0Iv7L0no1MPUBvqTpLwqa+poLpIYcvvyQbv
-H9X07t9WLebKahlzqlO+krNQAraFJnJj2HVQYnUUt7NQGj/KEQALhUVpbbalrlHhStyCP2yMNLJ3
-a9kC9n8O6mUE8c1UyrrJzOCE98g+EZfTYAkYvAX/bIkz8OwVDw==
------END CERTIFICATE-----
-
-Entrust.net Global Secure Personal CA
-=====================================
------BEGIN CERTIFICATE-----
-MIIEgzCCA+ygAwIBAgIEOJ725DANBgkqhkiG9w0BAQQFADCBtDEUMBIGA1UEChMLRW50cnVzdC5u
-ZXQxQDA+BgNVBAsUN3d3dy5lbnRydXN0Lm5ldC9HQ0NBX0NQUyBpbmNvcnAuIGJ5IHJlZi4gKGxp
-bWl0cyBsaWFiLikxJTAjBgNVBAsTHChjKSAyMDAwIEVudHJ1c3QubmV0IExpbWl0ZWQxMzAxBgNV
-BAMTKkVudHJ1c3QubmV0IENsaWVudCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw0wMDAyMDcx
-NjE2NDBaFw0yMDAyMDcxNjQ2NDBaMIG0MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDFAMD4GA1UECxQ3
-d3d3LmVudHJ1c3QubmV0L0dDQ0FfQ1BTIGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
-MCMGA1UECxMcKGMpIDIwMDAgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5u
-ZXQgQ2xpZW50IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB
-iQKBgQCTdLS25MVL1qFof2LV7PdRV7NySpj10InJrWPNTTVRaoTUrcloeW+46xHbh65cJFET8VQl
-hK8pK5/jgOLZy93GRUk0iJBeAZfv6lOm3fzB3ksqJeTpNfpVBQbliXrqpBFXO/x8PTbNZzVtpKkl
-Wb1m9fkn5JVn1j+SgF7yNH0rhQIDAQABo4IBnjCCAZowEQYJYIZIAYb4QgEBBAQDAgAHMIHdBgNV
-HR8EgdUwgdIwgc+ggcyggcmkgcYwgcMxFDASBgNVBAoTC0VudHJ1c3QubmV0MUAwPgYDVQQLFDd3
-d3cuZW50cnVzdC5uZXQvR0NDQV9DUFMgaW5jb3JwLiBieSByZWYuIChsaW1pdHMgbGlhYi4pMSUw
-IwYDVQQLExwoYykgMjAwMCBFbnRydXN0Lm5ldCBMaW1pdGVkMTMwMQYDVQQDEypFbnRydXN0Lm5l
-dCBDbGllbnQgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxDTALBgNVBAMTBENSTDEwKwYDVR0QBCQw
-IoAPMjAwMDAyMDcxNjE2NDBagQ8yMDIwMDIwNzE2NDY0MFowCwYDVR0PBAQDAgEGMB8GA1UdIwQY
-MBaAFISLdP3FjcD/J20gN0V8/i3OutN9MB0GA1UdDgQWBBSEi3T9xY3A/ydtIDdFfP4tzrrTfTAM
-BgNVHRMEBTADAQH/MB0GCSqGSIb2fQdBAAQQMA4bCFY1LjA6NC4wAwIEkDANBgkqhkiG9w0BAQQF
-AAOBgQBObzWAO9GK9Q6nIMstZVXQkvTnhLUGJoMShAusO7JE7r3PQNsgDrpuFOow4DtifH+La3xK
-p9U1PL6oXOpLu5OOgGarDyn9TS2/GpsKkMWr2tGzhtQvJFJcem3G8v7lTRowjJDyutdKPkN+1MhQ
-Gof4T4HHdguEOnKdzmVml64mXg==
------END CERTIFICATE-----
-
 Entrust Root Certification Authority
 ====================================
 -----BEGIN CERTIFICATE-----
@@ -852,61 +563,6 @@ W3iDVuycNsMm4hH2Z0kdkquM++v/eu6FSqdQgPCnXEqULl8FmTxSQeDNtGPPAUO6nIPcj2A781q0
 tHuu2guQOHXvgR1m0vdXcDazv/wor3ElhVsT/h5/WrQ8
 -----END CERTIFICATE-----
 
-AOL Time Warner Root Certification Authority 1
-==============================================
------BEGIN CERTIFICATE-----
-MIID5jCCAs6gAwIBAgIBATANBgkqhkiG9w0BAQUFADCBgzELMAkGA1UEBhMCVVMxHTAbBgNVBAoT
-FEFPTCBUaW1lIFdhcm5lciBJbmMuMRwwGgYDVQQLExNBbWVyaWNhIE9ubGluZSBJbmMuMTcwNQYD
-VQQDEy5BT0wgVGltZSBXYXJuZXIgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAxMB4XDTAy
-MDUyOTA2MDAwMFoXDTM3MTEyMDE1MDMwMFowgYMxCzAJBgNVBAYTAlVTMR0wGwYDVQQKExRBT0wg
-VGltZSBXYXJuZXIgSW5jLjEcMBoGA1UECxMTQW1lcmljYSBPbmxpbmUgSW5jLjE3MDUGA1UEAxMu
-QU9MIFRpbWUgV2FybmVyIFJvb3QgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMTCCASIwDQYJKoZI
-hvcNAQEBBQADggEPADCCAQoCggEBAJnej8Mlo2k06AX3dLm/WpcZuS+U0pPlLYnKhHw/EEMbjIt8
-hFj4JHxIzyr9wBXZGH6EGhfT257XyuTZ16pYUYfw8ItITuLCxFlpMGK2MKKMCxGZYTVtfu/FsRkG
-IBKOQuHfD5YQUqjPnF+VFNivO3ULMSAfRC+iYkGzuxgh28pxPIzstrkNn+9R7017EvILDOGsQI93
-f7DKeHEMXRZxcKLXwjqFzQ6axOAAsNUl6twr5JQtOJyJQVdkKGUZHLZEtMgxa44Be3ZZJX8VHIQI
-fHNlIAqhBC4aMqiaILGcLCFZ5/vP7nAtCMpjPiybkxlqpMKX/7eGV4iFbJ4VFitNLLMCAwEAAaNj
-MGEwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUoTYwFsuGkABFgFOxj8jYPXy+XxIwHwYDVR0j
-BBgwFoAUoTYwFsuGkABFgFOxj8jYPXy+XxIwDgYDVR0PAQH/BAQDAgGGMA0GCSqGSIb3DQEBBQUA
-A4IBAQCKIBilvrMvtKaEAEAwKfq0FHNMeUWn9nDg6H5kHgqVfGphwu9OH77/yZkfB2FK4V1Mza3u
-0FIy2VkyvNp5ctZ7CegCgTXTCt8RHcl5oIBN/lrXVtbtDyqvpxh1MwzqwWEFT2qaifKNuZ8u77Bf
-WgDrvq2g+EQFZ7zLBO+eZMXpyD8Fv8YvBxzDNnGGyjhmSs3WuEvGbKeXO/oTLW4jYYehY0KswsuX
-n2Fozy1MBJ3XJU8KDk2QixhWqJNIV9xvrr2eZ1d3iVCzvhGbRWeDhhmH05i9CBoWH1iCC+GWaQVL
-juyDUTEH1dSf/1l7qG6Fz9NLqUmwX7A5KGgOc90lmt4S
------END CERTIFICATE-----
-
-AOL Time Warner Root Certification Authority 2
-==============================================
------BEGIN CERTIFICATE-----
-MIIF5jCCA86gAwIBAgIBATANBgkqhkiG9w0BAQUFADCBgzELMAkGA1UEBhMCVVMxHTAbBgNVBAoT
-FEFPTCBUaW1lIFdhcm5lciBJbmMuMRwwGgYDVQQLExNBbWVyaWNhIE9ubGluZSBJbmMuMTcwNQYD
-VQQDEy5BT0wgVGltZSBXYXJuZXIgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAyMB4XDTAy
-MDUyOTA2MDAwMFoXDTM3MDkyODIzNDMwMFowgYMxCzAJBgNVBAYTAlVTMR0wGwYDVQQKExRBT0wg
-VGltZSBXYXJuZXIgSW5jLjEcMBoGA1UECxMTQW1lcmljYSBPbmxpbmUgSW5jLjE3MDUGA1UEAxMu
-QU9MIFRpbWUgV2FybmVyIFJvb3QgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMjCCAiIwDQYJKoZI
-hvcNAQEBBQADggIPADCCAgoCggIBALQ3WggWmRToVbEbJGv8x4vmh6mJ7ouZzU9AhqS2TcnZsdw8
-TQ2FTBVsRotSeJ/4I/1n9SQ6aF3Q92RhQVSji6UI0ilbm2BPJoPRYxJWSXakFsKlnUWsi4SVqBax
-7J/qJBrvuVdcmiQhLE0OcR+mrF1FdAOYxFSMFkpBd4aVdQxHAWZg/BXxD+r1FHjHDtdugRxev17n
-OirYlxcwfACtCJ0zr7iZYYCLqJV+FNwSbKTQ2O9ASQI2+W6p1h2WVgSysy0WVoaP2SBXgM1nEG2w
-TPDaRrbqJS5Gr42whTg0ixQmgiusrpkLjhTXUr2eacOGAgvqdnUxCc4zGSGFQ+aJLZ8lN2fxI2rS
-AG2X+Z/nKcrdH9cG6rjJuQkhn8g/BsXS6RJGAE57COtCPStIbp1n3UsC5ETzkxmlJ85per5n0/xQ
-pCyrw2u544BMzwVhSyvcG7mm0tCq9Stz+86QNZ8MUhy/XCFhEVsVS6kkUfykXPcXnbDS+gfpj1bk
-GoxoigTTfFrjnqKhynFbotSg5ymFXQNoKk/SBtc9+cMDLz9l+WceR0DTYw/j1Y75hauXTLPXJuuW
-CpTehTacyH+BCQJJKg71ZDIMgtG6aoIbs0t0EfOMd9afv9w3pKdVBC/UMejTRrkDfNoSTllkt1Ex
-MVCgyhwn2RAurda9EGYrw7AiShJbAgMBAAGjYzBhMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYE
-FE9pbQN+nZ8HGEO8txBO1b+pxCAoMB8GA1UdIwQYMBaAFE9pbQN+nZ8HGEO8txBO1b+pxCAoMA4G
-A1UdDwEB/wQEAwIBhjANBgkqhkiG9w0BAQUFAAOCAgEAO/Ouyuguh4X7ZVnnrREUpVe8WJ8kEle7
-+z802u6teio0cnAxa8cZmIDJgt43d15Ui47y6mdPyXSEkVYJ1eV6moG2gcKtNuTxVBFT8zRFASbI
-5Rq8NEQh3q0l/HYWdyGQgJhXnU7q7C+qPBR7V8F+GBRn7iTGvboVsNIYvbdVgaxTwOjdaRITQrcC
-tQVBynlQboIOcXKTRuidDV29rs4prWPVVRaAMCf/drr3uNZK49m1+VLQTkCpx+XCMseqdiThawVQ
-68W/ClTluUI8JPu3B5wwn3la5uBAUhX0/Kr0VvlEl4ftDmVyXr4m+02kLQgH3thcoNyBM5kYJRF3
-p+v9WAksmWsbivNSPxpNSGDxoPYzAlOL7SUJuA0t7Zdz7NeWH45gDtoQmy8YJPamTQr5O8t1wswv
-ziRpyQoijlmn94IM19drNZxDAGrElWe6nEXLuA4399xOAU++CrYD062KRffaJ00psUjf5BHklka9
-bAI+1lHIlRcBFanyqqryvy9lG2/QuRqT9Y41xICHPpQvZuTpqP9BnHAqTyo5GJUefvthATxRCC4o
-GKQWDzH9OmwjkyB24f0HhdFbP9IcczLd+rn4jM8Ch3qaluTtT4mNU0OrDhPAARW0eTjb/G49nlG2
-uBOLZ8/5fNkiHfZdxRwBL5joeiQYvITX+txyW/fBOmg=
------END CERTIFICATE-----
-
 RSA Security 2048 v3
 ====================
 -----BEGIN CERTIFICATE-----
@@ -1030,31 +686,6 @@ gn2Z9DH2canPLAEnpQW5qrJITirvn5NSUZU8UnOOVkwXQMAJKOSLakhT2+zNVVXxxvjpoixMptEm
 X36vWkzaH6byHCx+rgIW0lbQL1dTR+iS
 -----END CERTIFICATE-----
 
-UTN-USER First-Network Applications
-===================================
------BEGIN CERTIFICATE-----
-MIIEZDCCA0ygAwIBAgIQRL4Mi1AAJLQR0zYwS8AzdzANBgkqhkiG9w0BAQUFADCBozELMAkGA1UE
-BhMCVVMxCzAJBgNVBAgTAlVUMRcwFQYDVQQHEw5TYWx0IExha2UgQ2l0eTEeMBwGA1UEChMVVGhl
-IFVTRVJUUlVTVCBOZXR3b3JrMSEwHwYDVQQLExhodHRwOi8vd3d3LnVzZXJ0cnVzdC5jb20xKzAp
-BgNVBAMTIlVUTi1VU0VSRmlyc3QtTmV0d29yayBBcHBsaWNhdGlvbnMwHhcNOTkwNzA5MTg0ODM5
-WhcNMTkwNzA5MTg1NzQ5WjCBozELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAlVUMRcwFQYDVQQHEw5T
-YWx0IExha2UgQ2l0eTEeMBwGA1UEChMVVGhlIFVTRVJUUlVTVCBOZXR3b3JrMSEwHwYDVQQLExho
-dHRwOi8vd3d3LnVzZXJ0cnVzdC5jb20xKzApBgNVBAMTIlVUTi1VU0VSRmlyc3QtTmV0d29yayBB
-cHBsaWNhdGlvbnMwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCz+5Gh5DZVhawGNFug
-mliy+LUPBXeDrjKxdpJo7CNKyXY/45y2N3kDuatpjQclthln5LAbGHNhSuh+zdMvZOOmfAz6F4Cj
-DUeJT1FxL+78P/m4FoCHiZMlIJpDgmkkdihZNaEdwH+DBmQWICzTSaSFtMBhf1EI+GgVkYDLpdXu
-Ozr0hAReYFmnjDRy7rh4xdE7EkpvfmUnuaRVxblvQ6TFHSyZwFKkeEwVs0CYCGtDxgGwenv1axwi
-P8vv/6jQOkt2FZ7S0cYu49tXGzKiuG/ohqY/cKvlcJKrRB5AUPuco2LkbG6gyN7igEL66S/ozjIE
-j3yNtxyjNTwV3Z7DrpelAgMBAAGjgZEwgY4wCwYDVR0PBAQDAgHGMA8GA1UdEwEB/wQFMAMBAf8w
-HQYDVR0OBBYEFPqGydvguul49Uuo1hXf8NPhahQ8ME8GA1UdHwRIMEYwRKBCoECGPmh0dHA6Ly9j
-cmwudXNlcnRydXN0LmNvbS9VVE4tVVNFUkZpcnN0LU5ldHdvcmtBcHBsaWNhdGlvbnMuY3JsMA0G
-CSqGSIb3DQEBBQUAA4IBAQCk8yXM0dSRgyLQzDKrm5ZONJFUICU0YV8qAhXhi6r/fWRRzwr/vH3Y
-IWp4yy9Rb/hCHTO967V7lMPDqaAt39EpHx3+jz+7qEUqf9FuVSTiuwL7MT++6LzsQCv4AdRWOOTK
-RIK1YSAhZ2X28AvnNPilwpyjXEAfhZOVBt5P1CeptqX8Fs1zMT+4ZSfP1FMa8Kxun08FDAOBp4Qp
-xFq9ZFdyrTvPNximmMatBrTcCKME1SmklpoSZ0qMYEWd8SOasACcaLWYUNPvji6SZbFIPiG+FTAq
-DbUMo2s/rn9X9R+WfN9v3YIwLGUbQErNaLly7HF27FSOH4UMAWr6pjisH8SE
------END CERTIFICATE-----
-
 America Online Root Certification Authority 1
 =============================================
 -----BEGIN CERTIFICATE-----
@@ -1130,48 +761,6 @@ YQa7FkKMcPcw++DbZqMAAb3mLNqRX6BGi01qnD093QVG/na/oAo85ADmJ7f/hC3euiInlhBx6yLt
 398znM/jra6O1I7mT1GvFpLgXPYHDw==
 -----END CERTIFICATE-----
 
-TC TrustCenter, Germany, Class 2 CA
-===================================
------BEGIN CERTIFICATE-----
-MIIDXDCCAsWgAwIBAgICA+owDQYJKoZIhvcNAQEEBQAwgbwxCzAJBgNVBAYTAkRFMRAwDgYDVQQI
-EwdIYW1idXJnMRAwDgYDVQQHEwdIYW1idXJnMTowOAYDVQQKEzFUQyBUcnVzdENlbnRlciBmb3Ig
-U2VjdXJpdHkgaW4gRGF0YSBOZXR3b3JrcyBHbWJIMSIwIAYDVQQLExlUQyBUcnVzdENlbnRlciBD
-bGFzcyAyIENBMSkwJwYJKoZIhvcNAQkBFhpjZXJ0aWZpY2F0ZUB0cnVzdGNlbnRlci5kZTAeFw05
-ODAzMDkxMTU5NTlaFw0xMTAxMDExMTU5NTlaMIG8MQswCQYDVQQGEwJERTEQMA4GA1UECBMHSGFt
-YnVyZzEQMA4GA1UEBxMHSGFtYnVyZzE6MDgGA1UEChMxVEMgVHJ1c3RDZW50ZXIgZm9yIFNlY3Vy
-aXR5IGluIERhdGEgTmV0d29ya3MgR21iSDEiMCAGA1UECxMZVEMgVHJ1c3RDZW50ZXIgQ2xhc3Mg
-MiBDQTEpMCcGCSqGSIb3DQEJARYaY2VydGlmaWNhdGVAdHJ1c3RjZW50ZXIuZGUwgZ8wDQYJKoZI
-hvcNAQEBBQADgY0AMIGJAoGBANo46O0yAClxgwENv4wB3NrGrTmkqYov1YtcaF9QxmL1Zr3KkSLs
-qh1R1z2zUbKDTl3LSbDwTFXlay3HhQswHJJOgtTKAu33b77c4OMUuAVT8pr0VotanoWT0bSCVq5N
-u6hLVxa8/vhYnvgpjbB7zXjJT6yLZwzxnPv8V5tXXE8NAgMBAAGjazBpMA8GA1UdEwEB/wQFMAMB
-Af8wDgYDVR0PAQH/BAQDAgGGMDMGCWCGSAGG+EIBCAQmFiRodHRwOi8vd3d3LnRydXN0Y2VudGVy
-LmRlL2d1aWRlbGluZXMwEQYJYIZIAYb4QgEBBAQDAgAHMA0GCSqGSIb3DQEBBAUAA4GBAIRS+yjf
-/x91AbwBvgRWl2p0QiQxg/lGsQaKic+WLDO/jLVfenKhhQbOhvgFjuj5Jcrag4wGrOs2bYWRNAQ2
-9ELw+HkuCkhcq8xRT3h2oNmsGb0q0WkEKJHKNhAngFdb0lz1wlurZIFjdFH0l7/NEij3TWZ/p/Ac
-ASZ4smZHcFFk
------END CERTIFICATE-----
-
-TC TrustCenter, Germany, Class 3 CA
-===================================
------BEGIN CERTIFICATE-----
-MIIDXDCCAsWgAwIBAgICA+swDQYJKoZIhvcNAQEEBQAwgbwxCzAJBgNVBAYTAkRFMRAwDgYDVQQI
-EwdIYW1idXJnMRAwDgYDVQQHEwdIYW1idXJnMTowOAYDVQQKEzFUQyBUcnVzdENlbnRlciBmb3Ig
-U2VjdXJpdHkgaW4gRGF0YSBOZXR3b3JrcyBHbWJIMSIwIAYDVQQLExlUQyBUcnVzdENlbnRlciBD
-bGFzcyAzIENBMSkwJwYJKoZIhvcNAQkBFhpjZXJ0aWZpY2F0ZUB0cnVzdGNlbnRlci5kZTAeFw05
-ODAzMDkxMTU5NTlaFw0xMTAxMDExMTU5NTlaMIG8MQswCQYDVQQGEwJERTEQMA4GA1UECBMHSGFt
-YnVyZzEQMA4GA1UEBxMHSGFtYnVyZzE6MDgGA1UEChMxVEMgVHJ1c3RDZW50ZXIgZm9yIFNlY3Vy
-aXR5IGluIERhdGEgTmV0d29ya3MgR21iSDEiMCAGA1UECxMZVEMgVHJ1c3RDZW50ZXIgQ2xhc3Mg
-MyBDQTEpMCcGCSqGSIb3DQEJARYaY2VydGlmaWNhdGVAdHJ1c3RjZW50ZXIuZGUwgZ8wDQYJKoZI
-hvcNAQEBBQADgY0AMIGJAoGBALa0wTUFLg2N7KBAahwOJ6ZQkmtQGwfeLud2zODa/ISoXoxjaitN
-2U4CdhHBC/KNecoAtvGwDtf7pBc9r6tpepYnv68zoZoqWarEtTcI8hKlMbZD9TKWcSgoq40oht+7
-7uMMfTDWw1Krj10nnGvAo+cFa1dJRLNu6mTP0o56UHd3AgMBAAGjazBpMA8GA1UdEwEB/wQFMAMB
-Af8wDgYDVR0PAQH/BAQDAgGGMDMGCWCGSAGG+EIBCAQmFiRodHRwOi8vd3d3LnRydXN0Y2VudGVy
-LmRlL2d1aWRlbGluZXMwEQYJYIZIAYb4QgEBBAQDAgAHMA0GCSqGSIb3DQEBBAUAA4GBABY9xs3B
-u4VxhUafPiCPUSiZ7C1FIWMjWwS7TJC4iJIETb19AaM/9uzO8d7+feXhPrvGq14L3T2WxMup1Pkm
-5gZOngylerpuw3yCGdHHsbHD2w2Om0B8NwvxXej9H5CIpQ5ON2QhqE6NtJ/x3kit1VYYUimLRzQS
-CdS7kjXvD9s0
------END CERTIFICATE-----
-
 Certum Root CA
 ==============
 -----BEGIN CERTIFICATE-----
@@ -1265,253 +854,6 @@ R+4viMi14QVFwL4Ucd56/Y57fU0IlqUSc/AtyjcndBInTMu2l+nZrghtWjlA3QVHdWpaIbOjGM9O
 9y5Xt5hwXsjEeLBi
 -----END CERTIFICATE-----
 
-IPS Chained CAs root
-====================
------BEGIN CERTIFICATE-----
-MIIH9zCCB2CgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCARwxCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjEzMDEGA1UECxMqSVBTIENBIENoYWluZWQgQ0FzIENlcnRpZmljYXRpb24gQXV0
-aG9yaXR5MTMwMQYDVQQDEypJUFMgQ0EgQ2hhaW5lZCBDQXMgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
-dHkxHjAcBgkqhkiG9w0BCQEWD2lwc0BtYWlsLmlwcy5lczAeFw0wMTEyMjkwMDUzNThaFw0yNTEy
-MjcwMDUzNThaMIIBHDELMAkGA1UEBhMCRVMxEjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UEBxMJ
-QmFyY2Vsb25hMS4wLAYDVQQKEyVJUFMgSW50ZXJuZXQgcHVibGlzaGluZyBTZXJ2aWNlcyBzLmwu
-MSswKQYDVQQKFCJpcHNAbWFpbC5pcHMuZXMgQy5JLkYuICBCLTYwOTI5NDUyMTMwMQYDVQQLEypJ
-UFMgQ0EgQ2hhaW5lZCBDQXMgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxMzAxBgNVBAMTKklQUyBD
-QSBDaGFpbmVkIENBcyBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTEeMBwGCSqGSIb3DQEJARYPaXBz
-QG1haWwuaXBzLmVzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDcVpJJspQgvJhPUOtopKdJ
-C7/SMejHT8KGC/po/UNaivNgkjWZOLtNA1IhW/A3mTXhQSCBhYEFcYGdtJUZqV92NC5jNzVXjrQf
-Qj8VXOF6wV8TGDIxya2+o8eDZh65nAQTy2nBBt4wBrszo7Uf8I9vzv+W6FS+ZoCua9tBhDaiPQID
-AQABo4IEQzCCBD8wHQYDVR0OBBYEFKGtMbH5PuEXpsirNPxShwkeYlJBMIIBTgYDVR0jBIIBRTCC
-AUGAFKGtMbH5PuEXpsirNPxShwkeYlJBoYIBJKSCASAwggEcMQswCQYDVQQGEwJFUzESMBAGA1UE
-CBMJQmFyY2Vsb25hMRIwEAYDVQQHEwlCYXJjZWxvbmExLjAsBgNVBAoTJUlQUyBJbnRlcm5ldCBw
-dWJsaXNoaW5nIFNlcnZpY2VzIHMubC4xKzApBgNVBAoUImlwc0BtYWlsLmlwcy5lcyBDLkkuRi4g
-IEItNjA5Mjk0NTIxMzAxBgNVBAsTKklQUyBDQSBDaGFpbmVkIENBcyBDZXJ0aWZpY2F0aW9uIEF1
-dGhvcml0eTEzMDEGA1UEAxMqSVBTIENBIENoYWluZWQgQ0FzIENlcnRpZmljYXRpb24gQXV0aG9y
-aXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXOCAQAwDAYDVR0TBAUwAwEB/zAMBgNV
-HQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUF
-BwMEBggrBgEFBQcDCAYKKwYBBAGCNwIBFQYKKwYBBAGCNwIBFgYKKwYBBAGCNwoDAQYKKwYBBAGC
-NwoDBDARBglghkgBhvhCAQEEBAMCAAcwGgYDVR0RBBMwEYEPaXBzQG1haWwuaXBzLmVzMBoGA1Ud
-EgQTMBGBD2lwc0BtYWlsLmlwcy5lczBCBglghkgBhvhCAQ0ENRYzQ2hhaW5lZCBDQSBDZXJ0aWZp
-Y2F0ZSBpc3N1ZWQgYnkgaHR0cDovL3d3dy5pcHMuZXMvMCkGCWCGSAGG+EIBAgQcFhpodHRwOi8v
-d3d3Lmlwcy5lcy9pcHMyMDAyLzA3BglghkgBhvhCAQQEKhYoaHR0cDovL3d3dy5pcHMuZXMvaXBz
-MjAwMi9pcHMyMDAyQ0FDLmNybDA8BglghkgBhvhCAQMELxYtaHR0cDovL3d3dy5pcHMuZXMvaXBz
-MjAwMi9yZXZvY2F0aW9uQ0FDLmh0bWw/MDkGCWCGSAGG+EIBBwQsFipodHRwOi8vd3d3Lmlwcy5l
-cy9pcHMyMDAyL3JlbmV3YWxDQUMuaHRtbD8wNwYJYIZIAYb4QgEIBCoWKGh0dHA6Ly93d3cuaXBz
-LmVzL2lwczIwMDIvcG9saWN5Q0FDLmh0bWwwbQYDVR0fBGYwZDAuoCygKoYoaHR0cDovL3d3dy5p
-cHMuZXMvaXBzMjAwMi9pcHMyMDAyQ0FDLmNybDAyoDCgLoYsaHR0cDovL3d3d2JhY2suaXBzLmVz
-L2lwczIwMDIvaXBzMjAwMkNBQy5jcmwwLwYIKwYBBQUHAQEEIzAhMB8GCCsGAQUFBzABhhNodHRw
-Oi8vb2NzcC5pcHMuZXMvMA0GCSqGSIb3DQEBBQUAA4GBAERyMJ1WWKJBGyi3leGmGpVfp3hAK+/b
-lkr8THFj2XOVvQLiogbHvpcqk4A0hgP63Ng9HgfNHnNDJGD1HWHc3JagvPsd4+cSACczAsDAK1M9
-2GsDgaPb1pOVIO/Tln4mkImcJpvNb2ar7QMiRDjMWb2f2/YHogF/JsRj9SVCXmK9
------END CERTIFICATE-----
-
-IPS CLASE1 root
-===============
------BEGIN CERTIFICATE-----
-MIIH6jCCB1OgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCARIxCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjEuMCwGA1UECxMlSVBTIENBIENMQVNFMSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0
-eTEuMCwGA1UEAxMlSVBTIENBIENMQVNFMSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTEeMBwGCSqG
-SIb3DQEJARYPaXBzQG1haWwuaXBzLmVzMB4XDTAxMTIyOTAwNTkzOFoXDTI1MTIyNzAwNTkzOFow
-ggESMQswCQYDVQQGEwJFUzESMBAGA1UECBMJQmFyY2Vsb25hMRIwEAYDVQQHEwlCYXJjZWxvbmEx
-LjAsBgNVBAoTJUlQUyBJbnRlcm5ldCBwdWJsaXNoaW5nIFNlcnZpY2VzIHMubC4xKzApBgNVBAoU
-Imlwc0BtYWlsLmlwcy5lcyBDLkkuRi4gIEItNjA5Mjk0NTIxLjAsBgNVBAsTJUlQUyBDQSBDTEFT
-RTEgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLjAsBgNVBAMTJUlQUyBDQSBDTEFTRTEgQ2VydGlm
-aWNhdGlvbiBBdXRob3JpdHkxHjAcBgkqhkiG9w0BCQEWD2lwc0BtYWlsLmlwcy5lczCBnzANBgkq
-hkiG9w0BAQEFAAOBjQAwgYkCgYEA4FEnpwvdr9G5Q1uCN0VWcu+atsIS7ywSzHb5BlmvXSHU0lq4
-oNTzav3KaY1mSPd05u42veiWkXWmcSjK5yISMmmwPh5r9FBSYmL9Yzt9fuzuOOpi9GyocY3h6YvJ
-P8a1zZRCb92CRTzo3wno7wpVqVZHYUxJZHMQKD/Kvwn/xi8CAwEAAaOCBEowggRGMB0GA1UdDgQW
-BBTrsxl588GlHKzcuh9morKbadB4CDCCAUQGA1UdIwSCATswggE3gBTrsxl588GlHKzcuh9morKb
-adB4CKGCARqkggEWMIIBEjELMAkGA1UEBhMCRVMxEjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UE
-BxMJQmFyY2Vsb25hMS4wLAYDVQQKEyVJUFMgSW50ZXJuZXQgcHVibGlzaGluZyBTZXJ2aWNlcyBz
-LmwuMSswKQYDVQQKFCJpcHNAbWFpbC5pcHMuZXMgQy5JLkYuICBCLTYwOTI5NDUyMS4wLAYDVQQL
-EyVJUFMgQ0EgQ0xBU0UxIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MS4wLAYDVQQDEyVJUFMgQ0Eg
-Q0xBU0UxIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5p
-cHMuZXOCAQAwDAYDVR0TBAUwAwEB/zAMBgNVHQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsGAQUFBwMB
-BggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwMEBggrBgEFBQcDCAYKKwYBBAGCNwIBFQYKKwYB
-BAGCNwIBFgYKKwYBBAGCNwoDAQYKKwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAAcwGgYDVR0R
-BBMwEYEPaXBzQG1haWwuaXBzLmVzMBoGA1UdEgQTMBGBD2lwc0BtYWlsLmlwcy5lczBBBglghkgB
-hvhCAQ0ENBYyQ0xBU0UxIENBIENlcnRpZmljYXRlIGlzc3VlZCBieSBodHRwOi8vd3d3Lmlwcy5l
-cy8wKQYJYIZIAYb4QgECBBwWGmh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvMDoGCWCGSAGG+EIB
-BAQtFitodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL2lwczIwMDJDTEFTRTEuY3JsMD8GCWCGSAGG
-+EIBAwQyFjBodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL3Jldm9jYXRpb25DTEFTRTEuaHRtbD8w
-PAYJYIZIAYb4QgEHBC8WLWh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmVuZXdhbENMQVNFMS5o
-dG1sPzA6BglghkgBhvhCAQgELRYraHR0cDovL3d3dy5pcHMuZXMvaXBzMjAwMi9wb2xpY3lDTEFT
-RTEuaHRtbDBzBgNVHR8EbDBqMDGgL6AthitodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL2lwczIw
-MDJDTEFTRTEuY3JsMDWgM6Axhi9odHRwOi8vd3d3YmFjay5pcHMuZXMvaXBzMjAwMi9pcHMyMDAy
-Q0xBU0UxLmNybDAvBggrBgEFBQcBAQQjMCEwHwYIKwYBBQUHMAGGE2h0dHA6Ly9vY3NwLmlwcy5l
-cy8wDQYJKoZIhvcNAQEFBQADgYEAK9Dr/drIyllq2tPMMi7JVBuKYn4VLenZMdMu9Ccj/1urxUq2
-ckCuU3T0vAW0xtnIyXf7t/k0f3gA+Nak5FI/LEpjV4F1Wo7ojPsCwJTGKbqz3Bzosq/SLmJbGqmO
-DszFV0VRFOlOHIilkfSj945RyKm+hjM+5i9Ibq9UkE6tsSU=
------END CERTIFICATE-----
-
-IPS CLASE3 root
-===============
------BEGIN CERTIFICATE-----
-MIIH6jCCB1OgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCARIxCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjEuMCwGA1UECxMlSVBTIENBIENMQVNFMyBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0
-eTEuMCwGA1UEAxMlSVBTIENBIENMQVNFMyBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTEeMBwGCSqG
-SIb3DQEJARYPaXBzQG1haWwuaXBzLmVzMB4XDTAxMTIyOTAxMDE0NFoXDTI1MTIyNzAxMDE0NFow
-ggESMQswCQYDVQQGEwJFUzESMBAGA1UECBMJQmFyY2Vsb25hMRIwEAYDVQQHEwlCYXJjZWxvbmEx
-LjAsBgNVBAoTJUlQUyBJbnRlcm5ldCBwdWJsaXNoaW5nIFNlcnZpY2VzIHMubC4xKzApBgNVBAoU
-Imlwc0BtYWlsLmlwcy5lcyBDLkkuRi4gIEItNjA5Mjk0NTIxLjAsBgNVBAsTJUlQUyBDQSBDTEFT
-RTMgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLjAsBgNVBAMTJUlQUyBDQSBDTEFTRTMgQ2VydGlm
-aWNhdGlvbiBBdXRob3JpdHkxHjAcBgkqhkiG9w0BCQEWD2lwc0BtYWlsLmlwcy5lczCBnzANBgkq
-hkiG9w0BAQEFAAOBjQAwgYkCgYEAqxf+DrDGaBtT8FK+n/ra+osTBLsBjzLZH49NzjaY2uQARIwo
-2BNEKqRrThckQpzTiKRBgtYj+4vJhuW5qYIF3PHeH+AMmVWY8jjsbJ0gA8DvqqPGZARRLXgNo9Ko
-OtYkTOmWehisEyMiG3zoMRGzXwmqMHBxRiVrSXGAK5UBsh8CAwEAAaOCBEowggRGMB0GA1UdDgQW
-BBS4k/8uy9wsjqLnev42USGjmFsMNDCCAUQGA1UdIwSCATswggE3gBS4k/8uy9wsjqLnev42USGj
-mFsMNKGCARqkggEWMIIBEjELMAkGA1UEBhMCRVMxEjAQBgNVBAgTCUJhcmNlbG9uYTESMBAGA1UE
-BxMJQmFyY2Vsb25hMS4wLAYDVQQKEyVJUFMgSW50ZXJuZXQgcHVibGlzaGluZyBTZXJ2aWNlcyBz
-LmwuMSswKQYDVQQKFCJpcHNAbWFpbC5pcHMuZXMgQy5JLkYuICBCLTYwOTI5NDUyMS4wLAYDVQQL
-EyVJUFMgQ0EgQ0xBU0UzIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MS4wLAYDVQQDEyVJUFMgQ0Eg
-Q0xBU0UzIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5p
-cHMuZXOCAQAwDAYDVR0TBAUwAwEB/zAMBgNVHQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsGAQUFBwMB
-BggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwMEBggrBgEFBQcDCAYKKwYBBAGCNwIBFQYKKwYB
-BAGCNwIBFgYKKwYBBAGCNwoDAQYKKwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAAcwGgYDVR0R
-BBMwEYEPaXBzQG1haWwuaXBzLmVzMBoGA1UdEgQTMBGBD2lwc0BtYWlsLmlwcy5lczBBBglghkgB
-hvhCAQ0ENBYyQ0xBU0UzIENBIENlcnRpZmljYXRlIGlzc3VlZCBieSBodHRwOi8vd3d3Lmlwcy5l
-cy8wKQYJYIZIAYb4QgECBBwWGmh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvMDoGCWCGSAGG+EIB
-BAQtFitodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL2lwczIwMDJDTEFTRTMuY3JsMD8GCWCGSAGG
-+EIBAwQyFjBodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL3Jldm9jYXRpb25DTEFTRTMuaHRtbD8w
-PAYJYIZIAYb4QgEHBC8WLWh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmVuZXdhbENMQVNFMy5o
-dG1sPzA6BglghkgBhvhCAQgELRYraHR0cDovL3d3dy5pcHMuZXMvaXBzMjAwMi9wb2xpY3lDTEFT
-RTMuaHRtbDBzBgNVHR8EbDBqMDGgL6AthitodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL2lwczIw
-MDJDTEFTRTMuY3JsMDWgM6Axhi9odHRwOi8vd3d3YmFjay5pcHMuZXMvaXBzMjAwMi9pcHMyMDAy
-Q0xBU0UzLmNybDAvBggrBgEFBQcBAQQjMCEwHwYIKwYBBQUHMAGGE2h0dHA6Ly9vY3NwLmlwcy5l
-cy8wDQYJKoZIhvcNAQEFBQADgYEAF2VcmZVDAyevJuXr0LMXI/dDqsfwfewPxqmurpYPdikc4gYt
-fibFPPqhwYHOU7BC0ZdXGhd+pFFhxu7pXu8Fuuu9D6eSb9ijBmgpjnn1/7/5p6/ksc7C0YBCJwUE
-NPjDfxZ4IwwHJPJGR607VNCv1TGyr33I6unUVtkOE7LFRVA=
------END CERTIFICATE-----
-
-IPS CLASEA1 root
-================
------BEGIN CERTIFICATE-----
-MIIH9zCCB2CgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjEvMC0GA1UECxMmSVBTIENBIENMQVNFQTEgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
-dHkxLzAtBgNVBAMTJklQUyBDQSBDTEFTRUExIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJ
-KoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXMwHhcNMDExMjI5MDEwNTMyWhcNMjUxMjI3MDEwNTMy
-WjCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQIEwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9u
-YTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UE
-ChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAgQi02MDkyOTQ1MjEvMC0GA1UECxMmSVBTIENBIENM
-QVNFQTEgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLzAtBgNVBAMTJklQUyBDQSBDTEFTRUExIENl
-cnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXMwgZ8w
-DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALsw19zQVL01Tp/FTILq0VA8R5j8m2mdd81u4D/u6zJf
-X5/S0HnllXNEITLgCtud186Nq1KLK3jgm1t99P1tCeWu4WwdByOgF9H5fahGRpEiqLJpxq339fWU
-oTCUvQDMRH/uxJ7JweaPCjbB/SQ9AaD1e+J8eGZDi09Z8pvZ+kmzAgMBAAGjggRTMIIETzAdBgNV
-HQ4EFgQUZyaW56G/2LUDnf473P7yiuYV3TAwggFGBgNVHSMEggE9MIIBOYAUZyaW56G/2LUDnf47
-3P7yiuYV3TChggEcpIIBGDCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQIEwlCYXJjZWxvbmExEjAQ
-BgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1Ymxpc2hpbmcgU2Vydmlj
-ZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAgQi02MDkyOTQ1MjEvMC0G
-A1UECxMmSVBTIENBIENMQVNFQTEgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLzAtBgNVBAMTJklQ
-UyBDQSBDTEFTRUExIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNA
-bWFpbC5pcHMuZXOCAQAwDAYDVR0TBAUwAwEB/zAMBgNVHQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsG
-AQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwMEBggrBgEFBQcDCAYKKwYBBAGCNwIB
-FQYKKwYBBAGCNwIBFgYKKwYBBAGCNwoDAQYKKwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAAcw
-GgYDVR0RBBMwEYEPaXBzQG1haWwuaXBzLmVzMBoGA1UdEgQTMBGBD2lwc0BtYWlsLmlwcy5lczBC
-BglghkgBhvhCAQ0ENRYzQ0xBU0VBMSBDQSBDZXJ0aWZpY2F0ZSBpc3N1ZWQgYnkgaHR0cDovL3d3
-dy5pcHMuZXMvMCkGCWCGSAGG+EIBAgQcFhpodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyLzA7Bglg
-hkgBhvhCAQQELhYsaHR0cDovL3d3dy5pcHMuZXMvaXBzMjAwMi9pcHMyMDAyQ0xBU0VBMS5jcmww
-QAYJYIZIAYb4QgEDBDMWMWh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmV2b2NhdGlvbkNMQVNF
-QTEuaHRtbD8wPQYJYIZIAYb4QgEHBDAWLmh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmVuZXdh
-bENMQVNFQTEuaHRtbD8wOwYJYIZIAYb4QgEIBC4WLGh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIv
-cG9saWN5Q0xBU0VBMS5odG1sMHUGA1UdHwRuMGwwMqAwoC6GLGh0dHA6Ly93d3cuaXBzLmVzL2lw
-czIwMDIvaXBzMjAwMkNMQVNFQTEuY3JsMDagNKAyhjBodHRwOi8vd3d3YmFjay5pcHMuZXMvaXBz
-MjAwMi9pcHMyMDAyQ0xBU0VBMS5jcmwwLwYIKwYBBQUHAQEEIzAhMB8GCCsGAQUFBzABhhNodHRw
-Oi8vb2NzcC5pcHMuZXMvMA0GCSqGSIb3DQEBBQUAA4GBAH66iqyAAIQVCtWYUQxkxZwCWINmyq0e
-B81+atqAB98DNEock8RLWCA1NnHtogo1EqWmZaeFaQoO42Hu6r4okzPV7Oi+xNtff6j5YzHIa5bi
-KcJboOeXNp13XjFr/tOn2yrb25aLH2betgPAK7N41lUH5Y85UN4HI3LmvSAUS7SG
------END CERTIFICATE-----
-
-IPS CLASEA3 root
-================
------BEGIN CERTIFICATE-----
-MIIH9zCCB2CgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjEvMC0GA1UECxMmSVBTIENBIENMQVNFQTMgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
-dHkxLzAtBgNVBAMTJklQUyBDQSBDTEFTRUEzIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJ
-KoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXMwHhcNMDExMjI5MDEwNzUwWhcNMjUxMjI3MDEwNzUw
-WjCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQIEwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9u
-YTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UE
-ChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAgQi02MDkyOTQ1MjEvMC0GA1UECxMmSVBTIENBIENM
-QVNFQTMgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLzAtBgNVBAMTJklQUyBDQSBDTEFTRUEzIENl
-cnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXMwgZ8w
-DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAO6AAPYaZC6tasiDsYun7o/ZttvNG7uGBiJ2MwwSbUhW
-YdLcgiViL5/SaTBlA0IjWLxH3GvWdV0XPOH/8lhneaDBgbHUVqLyjRGZ/fZ98cfEXgIqmuJKtROK
-AP2Md4bm15T1IHUuDky/dMQ/gT6DtKM4Ninn6Cr1jIhBqoCm42zvAgMBAAGjggRTMIIETzAdBgNV
-HQ4EFgQUHp9XUEe2YZM50yz82l09BXW3mQIwggFGBgNVHSMEggE9MIIBOYAUHp9XUEe2YZM50yz8
-2l09BXW3mQKhggEcpIIBGDCCARQxCzAJBgNVBAYTAkVTMRIwEAYDVQQIEwlCYXJjZWxvbmExEjAQ
-BgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1Ymxpc2hpbmcgU2Vydmlj
-ZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAgQi02MDkyOTQ1MjEvMC0G
-A1UECxMmSVBTIENBIENMQVNFQTMgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxLzAtBgNVBAMTJklQ
-UyBDQSBDTEFTRUEzIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNA
-bWFpbC5pcHMuZXOCAQAwDAYDVR0TBAUwAwEB/zAMBgNVHQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsG
-AQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwMEBggrBgEFBQcDCAYKKwYBBAGCNwIB
-FQYKKwYBBAGCNwIBFgYKKwYBBAGCNwoDAQYKKwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAAcw
-GgYDVR0RBBMwEYEPaXBzQG1haWwuaXBzLmVzMBoGA1UdEgQTMBGBD2lwc0BtYWlsLmlwcy5lczBC
-BglghkgBhvhCAQ0ENRYzQ0xBU0VBMyBDQSBDZXJ0aWZpY2F0ZSBpc3N1ZWQgYnkgaHR0cDovL3d3
-dy5pcHMuZXMvMCkGCWCGSAGG+EIBAgQcFhpodHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyLzA7Bglg
-hkgBhvhCAQQELhYsaHR0cDovL3d3dy5pcHMuZXMvaXBzMjAwMi9pcHMyMDAyQ0xBU0VBMy5jcmww
-QAYJYIZIAYb4QgEDBDMWMWh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmV2b2NhdGlvbkNMQVNF
-QTMuaHRtbD8wPQYJYIZIAYb4QgEHBDAWLmh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmVuZXdh
-bENMQVNFQTMuaHRtbD8wOwYJYIZIAYb4QgEIBC4WLGh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIv
-cG9saWN5Q0xBU0VBMy5odG1sMHUGA1UdHwRuMGwwMqAwoC6GLGh0dHA6Ly93d3cuaXBzLmVzL2lw
-czIwMDIvaXBzMjAwMkNMQVNFQTMuY3JsMDagNKAyhjBodHRwOi8vd3d3YmFjay5pcHMuZXMvaXBz
-MjAwMi9pcHMyMDAyQ0xBU0VBMy5jcmwwLwYIKwYBBQUHAQEEIzAhMB8GCCsGAQUFBzABhhNodHRw
-Oi8vb2NzcC5pcHMuZXMvMA0GCSqGSIb3DQEBBQUAA4GBAEo9IEca2on0eisxeewBwMwB9dbB/MjD
-81ACUZBYKp/nNQlbMAqBACVHr9QPDp5gJqiVp4MI3y2s6Q73nMify5NF8bpqxmdRSmlPa/59Cy9S
-KcJQrSRE7SOzSMtEQMEDlQwKeAYSAfWRMS1Jjbs/RU4s4OjNtckUFQzjB4ObJnXv
------END CERTIFICATE-----
-
-IPS Timestamping root
-=====================
------BEGIN CERTIFICATE-----
-MIIIODCCB6GgAwIBAgIBADANBgkqhkiG9w0BAQUFADCCAR4xCzAJBgNVBAYTAkVTMRIwEAYDVQQI
-EwlCYXJjZWxvbmExEjAQBgNVBAcTCUJhcmNlbG9uYTEuMCwGA1UEChMlSVBTIEludGVybmV0IHB1
-Ymxpc2hpbmcgU2VydmljZXMgcy5sLjErMCkGA1UEChQiaXBzQG1haWwuaXBzLmVzIEMuSS5GLiAg
-Qi02MDkyOTQ1MjE0MDIGA1UECxMrSVBTIENBIFRpbWVzdGFtcGluZyBDZXJ0aWZpY2F0aW9uIEF1
-dGhvcml0eTE0MDIGA1UEAxMrSVBTIENBIFRpbWVzdGFtcGluZyBDZXJ0aWZpY2F0aW9uIEF1dGhv
-cml0eTEeMBwGCSqGSIb3DQEJARYPaXBzQG1haWwuaXBzLmVzMB4XDTAxMTIyOTAxMTAxOFoXDTI1
-MTIyNzAxMTAxOFowggEeMQswCQYDVQQGEwJFUzESMBAGA1UECBMJQmFyY2Vsb25hMRIwEAYDVQQH
-EwlCYXJjZWxvbmExLjAsBgNVBAoTJUlQUyBJbnRlcm5ldCBwdWJsaXNoaW5nIFNlcnZpY2VzIHMu
-bC4xKzApBgNVBAoUImlwc0BtYWlsLmlwcy5lcyBDLkkuRi4gIEItNjA5Mjk0NTIxNDAyBgNVBAsT
-K0lQUyBDQSBUaW1lc3RhbXBpbmcgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxNDAyBgNVBAMTK0lQ
-UyBDQSBUaW1lc3RhbXBpbmcgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxHjAcBgkqhkiG9w0BCQEW
-D2lwc0BtYWlsLmlwcy5lczCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAvLjuVqWajOY2ycJi
-oGaBjRrVetJznw6EZLqVtJCneK/K/lRhW86yIFcBrkSSQxA4Efdo/BdApWgnMjvEp+ZCccWZ73b/
-K5Uk9UmSGGjKALWkWi9uy9YbLA1UZ2t6KaFYq6JaANZbuxjC3/YeE1Z2m6Vo4pjOxgOKNNtMg0Gm
-qaMCAwEAAaOCBIAwggR8MB0GA1UdDgQWBBSL0BBQCYHynQnVDmB4AyKiP8jKZjCCAVAGA1UdIwSC
-AUcwggFDgBSL0BBQCYHynQnVDmB4AyKiP8jKZqGCASakggEiMIIBHjELMAkGA1UEBhMCRVMxEjAQ
-BgNVBAgTCUJhcmNlbG9uYTESMBAGA1UEBxMJQmFyY2Vsb25hMS4wLAYDVQQKEyVJUFMgSW50ZXJu
-ZXQgcHVibGlzaGluZyBTZXJ2aWNlcyBzLmwuMSswKQYDVQQKFCJpcHNAbWFpbC5pcHMuZXMgQy5J
-LkYuICBCLTYwOTI5NDUyMTQwMgYDVQQLEytJUFMgQ0EgVGltZXN0YW1waW5nIENlcnRpZmljYXRp
-b24gQXV0aG9yaXR5MTQwMgYDVQQDEytJUFMgQ0EgVGltZXN0YW1waW5nIENlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MR4wHAYJKoZIhvcNAQkBFg9pcHNAbWFpbC5pcHMuZXOCAQAwDAYDVR0TBAUwAwEB
-/zAMBgNVHQ8EBQMDB/+AMGsGA1UdJQRkMGIGCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMG
-CCsGAQUFBwMEBggrBgEFBQcDCAYKKwYBBAGCNwIBFQYKKwYBBAGCNwIBFgYKKwYBBAGCNwoDAQYK
-KwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAAcwGgYDVR0RBBMwEYEPaXBzQG1haWwuaXBzLmVz
-MBoGA1UdEgQTMBGBD2lwc0BtYWlsLmlwcy5lczBHBglghkgBhvhCAQ0EOhY4VGltZXN0YW1waW5n
-IENBIENlcnRpZmljYXRlIGlzc3VlZCBieSBodHRwOi8vd3d3Lmlwcy5lcy8wKQYJYIZIAYb4QgEC
-BBwWGmh0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvMEAGCWCGSAGG+EIBBAQzFjFodHRwOi8vd3d3
-Lmlwcy5lcy9pcHMyMDAyL2lwczIwMDJUaW1lc3RhbXBpbmcuY3JsMEUGCWCGSAGG+EIBAwQ4FjZo
-dHRwOi8vd3d3Lmlwcy5lcy9pcHMyMDAyL3Jldm9jYXRpb25UaW1lc3RhbXBpbmcuaHRtbD8wQgYJ
-YIZIAYb4QgEHBDUWM2h0dHA6Ly93d3cuaXBzLmVzL2lwczIwMDIvcmVuZXdhbFRpbWVzdGFtcGlu
-Zy5odG1sPzBABglghkgBhvhCAQgEMxYxaHR0cDovL3d3dy5pcHMuZXMvaXBzMjAwMi9wb2xpY3lU
-aW1lc3RhbXBpbmcuaHRtbDB/BgNVHR8EeDB2MDegNaAzhjFodHRwOi8vd3d3Lmlwcy5lcy9pcHMy
-MDAyL2lwczIwMDJUaW1lc3RhbXBpbmcuY3JsMDugOaA3hjVodHRwOi8vd3d3YmFjay5pcHMuZXMv
-aXBzMjAwMi9pcHMyMDAyVGltZXN0YW1waW5nLmNybDAvBggrBgEFBQcBAQQjMCEwHwYIKwYBBQUH
-MAGGE2h0dHA6Ly9vY3NwLmlwcy5lcy8wDQYJKoZIhvcNAQEFBQADgYEAZbrBzAAalZHK6Ww6vzoe
-FAh8+4Pua2JR0zORtWB5fgTYXXk36MNbsMRnLWhasl8OCvrNPzpFoeo2zyYepxEoxZSPhExTCMWT
-s/zif/WN87GphV+I3pGW7hdbrqXqcGV4LCFkAZXOzkw+UPS2Wctjjba9GNSHSl/c7+lW8AoM6HU=
------END CERTIFICATE-----
-
 QuoVadis Root CA
 ================
 -----BEGIN CERTIFICATE-----
@@ -1631,26 +973,6 @@ s58+OmJYxUmtYg5xpTKqL8aJdkNAExNnPaJUJRDL8Try2frbSVa7pv6nQTXD4IhhyYjH3zYQIphZ
 FL39vmwLAw==
 -----END CERTIFICATE-----
 
-Sonera Class 1 Root CA
-======================
------BEGIN CERTIFICATE-----
-MIIDIDCCAgigAwIBAgIBJDANBgkqhkiG9w0BAQUFADA5MQswCQYDVQQGEwJGSTEPMA0GA1UEChMG
-U29uZXJhMRkwFwYDVQQDExBTb25lcmEgQ2xhc3MxIENBMB4XDTAxMDQwNjEwNDkxM1oXDTIxMDQw
-NjEwNDkxM1owOTELMAkGA1UEBhMCRkkxDzANBgNVBAoTBlNvbmVyYTEZMBcGA1UEAxMQU29uZXJh
-IENsYXNzMSBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALWJHytPZwp5/8Ue+H88
-7dF+2rDNbS82rDTG29lkFwhjMDMiikzujrsPDUJVyZ0upe/3p4zDq7mXy47vPxVnqIJyY1MPQYx9
-EJUkoVqlBvqSV536pQHydekfvFYmUk54GWVYVQNYwBSujHxVX3BbdyMGNpfzJLWaRpXk3w0LBUXl
-0fIdgrvGE+D+qnr9aTCU89JFhfzyMlsy3uhsXR/LpCJ0sICOXZT3BgBLqdReLjVQCfOAl/QMF645
-2F/NM8EcyonCIvdFEu1eEpOdY6uCLrnrQkFEy0oaAIINnvmLVz5MxxftLItyM19yejhW1ebZrgUa
-HXVFsculJRwSVzb9IjcCAwEAAaMzMDEwDwYDVR0TAQH/BAUwAwEB/zARBgNVHQ4ECgQIR+IMi/ZT
-iFIwCwYDVR0PBAQDAgEGMA0GCSqGSIb3DQEBBQUAA4IBAQCLGrLJXWG04bkruVPRsoWdd44W7hE9
-28Jj2VuXZfsSZ9gqXLar5V7DtxYvyOirHYr9qxp81V9jz9yw3Xe5qObSIjiHBxTZ/75Wtf0HDjxV
-yhbMp6Z3N/vbXB9OWQaHowND9Rart4S9Tu+fMTfwRvFAttEMpWT4Y14h21VOTzF2nBBhjrZTOqMR
-vq9tfB69ri3iDGnHhVNoomG6xT60eVR4ngrHAr5i0RGCS2UvkVrCqIexVmiUefkl98HVrhq4uz2P
-qYo4Ffdz0Fpg0YCw8NzVUM1O7pJIae2yIx4wzMiUyLb1O4Z/P6Yun/Y+LLWSlj7fLJOK/4GMDw9Z
-IRlXvVWa
------END CERTIFICATE-----
-
 Sonera Class 2 Root CA
 ======================
 -----BEGIN CERTIFICATE-----
@@ -1770,32 +1092,6 @@ EZ4du5A/EkdOjtd+D2JzHVImOBwYSf0wdJrE5SIv2MCN7ZF6TACPcn9d2t0bi0Vr591pl6jFVkwP
 DPafepE39peC4N1xaf92P2BNPM/3mfnGV/TJVTl4uix5yaaIK/QI
 -----END CERTIFICATE-----
 
-UTN USERFirst Email Root CA
-===========================
------BEGIN CERTIFICATE-----
-MIIEojCCA4qgAwIBAgIQRL4Mi1AAJLQR0zYlJWfJiTANBgkqhkiG9w0BAQUFADCBrjELMAkGA1UE
-BhMCVVMxCzAJBgNVBAgTAlVUMRcwFQYDVQQHEw5TYWx0IExha2UgQ2l0eTEeMBwGA1UEChMVVGhl
-IFVTRVJUUlVTVCBOZXR3b3JrMSEwHwYDVQQLExhodHRwOi8vd3d3LnVzZXJ0cnVzdC5jb20xNjA0
-BgNVBAMTLVVUTi1VU0VSRmlyc3QtQ2xpZW50IEF1dGhlbnRpY2F0aW9uIGFuZCBFbWFpbDAeFw05
-OTA3MDkxNzI4NTBaFw0xOTA3MDkxNzM2NThaMIGuMQswCQYDVQQGEwJVUzELMAkGA1UECBMCVVQx
-FzAVBgNVBAcTDlNhbHQgTGFrZSBDaXR5MR4wHAYDVQQKExVUaGUgVVNFUlRSVVNUIE5ldHdvcmsx
-ITAfBgNVBAsTGGh0dHA6Ly93d3cudXNlcnRydXN0LmNvbTE2MDQGA1UEAxMtVVROLVVTRVJGaXJz
-dC1DbGllbnQgQXV0aGVudGljYXRpb24gYW5kIEVtYWlsMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
-MIIBCgKCAQEAsjmFpPJ9q0E7YkY3rs3BYHW8OWX5ShpHornMSMxqmNVNNRm5pELlzkniii8efNIx
-B8dOtINknS4p1aJkxIW9hVE1eaROaJB7HHqkkqgX8pgV8pPMyaQylbsMTzC9mKALi+VuG6JG+ni8
-om+rWV6lL8/K2m2qL+usobNqqrcuZzWLeeEeaYji5kbNoKXqvgvOdjp6Dpvq/NonWz1zHyLmSGHG
-TPNpsaguG7bUMSAsvIKKjqQOpdeJQ/wWWq8dcdcRWdq6hw2v+vPhwvCkxWeM1tZUOt4KpLoDd7Nl
-yP0e03RiqhjKaJMeoYV+9Udly/hNVyh00jT/MLbu9mIwFIws6wIDAQABo4G5MIG2MAsGA1UdDwQE
-AwIBxjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBSJgmd9xJ0mcABLtFBIfN49rgRufTBYBgNV
-HR8EUTBPME2gS6BJhkdodHRwOi8vY3JsLnVzZXJ0cnVzdC5jb20vVVROLVVTRVJGaXJzdC1DbGll
-bnRBdXRoZW50aWNhdGlvbmFuZEVtYWlsLmNybDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUH
-AwQwDQYJKoZIhvcNAQEFBQADggEBALFtYV2mGn98q0rkMPxTbyUkxsrt4jFcKw7u7mFVbwQ+zzne
-xRtJlOTrIEy05p5QLnLZjfWqo7NK2lYcYJeA3IKirUq9iiv/Cwm0xtcgBEXkzYABurorbs6q15L+
-5K/r9CYdFip/bDCVNy8zEqx/3cfREYxRmLLQo5HQrfafnoOTHh1CuEava2bwm3/q4wMC5QJRwarV
-NZ1yQAOJujEdxRBoUp7fooXFXAimeOZTT7Hot9MUnpOmw2TjrH5xzbyf6QMbzPvprDHBr3wVdAKZ
-w7JHpsIyYdfHb0gkUSeh1YdV8nuPmD0Wnu51tvjQjvLzxq4oW6fw8zYX/MMF08oDSlQ=
------END CERTIFICATE-----
-
 UTN USERFirst Hardware Root CA
 ==============================
 -----BEGIN CERTIFICATE-----
@@ -1822,31 +1118,6 @@ iCrVWFCVH/A7HFe7fRQ5YiuayZSSKqMiDP+JJn1fIytH1xUdqWqeUQ0qUZ6B+dQ7XnASfxAynB67
 nfhmqA==
 -----END CERTIFICATE-----
 
-UTN USERFirst Object Root CA
-============================
------BEGIN CERTIFICATE-----
-MIIEZjCCA06gAwIBAgIQRL4Mi1AAJLQR0zYt4LNfGzANBgkqhkiG9w0BAQUFADCBlTELMAkGA1UE
-BhMCVVMxCzAJBgNVBAgTAlVUMRcwFQYDVQQHEw5TYWx0IExha2UgQ2l0eTEeMBwGA1UEChMVVGhl
-IFVTRVJUUlVTVCBOZXR3b3JrMSEwHwYDVQQLExhodHRwOi8vd3d3LnVzZXJ0cnVzdC5jb20xHTAb
-BgNVBAMTFFVUTi1VU0VSRmlyc3QtT2JqZWN0MB4XDTk5MDcwOTE4MzEyMFoXDTE5MDcwOTE4NDAz
-NlowgZUxCzAJBgNVBAYTAlVTMQswCQYDVQQIEwJVVDEXMBUGA1UEBxMOU2FsdCBMYWtlIENpdHkx
-HjAcBgNVBAoTFVRoZSBVU0VSVFJVU1QgTmV0d29yazEhMB8GA1UECxMYaHR0cDovL3d3dy51c2Vy
-dHJ1c3QuY29tMR0wGwYDVQQDExRVVE4tVVNFUkZpcnN0LU9iamVjdDCCASIwDQYJKoZIhvcNAQEB
-BQADggEPADCCAQoCggEBAM6qgT+jo2F4qjEAVZURnicPHxzfOpuCaDDASmEd8S8O+r5596Uj71VR
-loTN2+O5bj4x2AogZ8f02b+U60cEPgLOKqJdhwQJ9jCdGIqXsqoc/EHSoTbL+z2RuufZcDX65OeQ
-w5ujm9M89RKZd7G3CeBo5hy485RjiGpq/gt2yb70IuRnuasaXnfBhQfdDWy/7gbHd2pBnqcP1/vu
-lBe3/IW+pKvEHDHd17bR5PDv3xaPslKT16HUiaEHLr/hARJCHhrh2JU022R5KP+6LhHC5ehbkkj7
-RwvCbNqtMoNB86XlQXD9ZZBt+vpRxPm9lisZBCzTbafc8H9vg2XiaquHhnUCAwEAAaOBrzCBrDAL
-BgNVHQ8EBAMCAcYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQU2u1kdBScFDyr3ZmpvVsoTYs8
-ydgwQgYDVR0fBDswOTA3oDWgM4YxaHR0cDovL2NybC51c2VydHJ1c3QuY29tL1VUTi1VU0VSRmly
-c3QtT2JqZWN0LmNybDApBgNVHSUEIjAgBggrBgEFBQcDAwYIKwYBBQUHAwgGCisGAQQBgjcKAwQw
-DQYJKoZIhvcNAQEFBQADggEBAAgfUrE3RHjb/c652pWWmKpVZIC1WkDdIaXFwfNfLEzIR1pp6ujw
-NTX00CXzyKakh0q9G7FzCL3Uw8q2NbtZhncxzaeAFK4T7/yxSPlrJSUtUbYsbUXBmMiKVl0+7kNO
-PmsnjtA6S4ULX9Ptaqd1y9Fahy85dRNacrACgZ++8A+EVCBibGnU4U3GDZlDAQ0Slox4nb9QorFE
-qmrPF3rPbw/U+CRVX/A0FklmPlBGyWNxODFiuGK581OtbLUrohKqGU8J2l7nk8aOFAj+8DCAGKCG
-hU3IfdeLA/5u1fedFqySLKAj5ZyRUh+U3xeUc8OzwcFxBSAAeL0TUh2oPs0AH8g=
------END CERTIFICATE-----
-
 Camerfirma Chambers of Commerce Root
 ====================================
 -----BEGIN CERTIFICATE-----
@@ -1901,42 +1172,6 @@ IBHNfTIzSJRUTN3cecQwn+uOuFW114hcxWokPbLTBQNRxgfvzBRydD1ucs4YKIxKoHflCStFREes
 t2d/AYoFWpO+ocH/+OcOZ6RHSXZddZAa9SaP8A==
 -----END CERTIFICATE-----
 
-NetLock Qualified (Class QA) Root
-=================================
------BEGIN CERTIFICATE-----
-MIIG0TCCBbmgAwIBAgIBezANBgkqhkiG9w0BAQUFADCByTELMAkGA1UEBhMCSFUxETAPBgNVBAcT
-CEJ1ZGFwZXN0MScwJQYDVQQKEx5OZXRMb2NrIEhhbG96YXRiaXp0b25zYWdpIEtmdC4xGjAYBgNV
-BAsTEVRhbnVzaXR2YW55a2lhZG9rMUIwQAYDVQQDEzlOZXRMb2NrIE1pbm9zaXRldHQgS296amVn
-eXpvaSAoQ2xhc3MgUUEpIFRhbnVzaXR2YW55a2lhZG8xHjAcBgkqhkiG9w0BCQEWD2luZm9AbmV0
-bG9jay5odTAeFw0wMzAzMzAwMTQ3MTFaFw0yMjEyMTUwMTQ3MTFaMIHJMQswCQYDVQQGEwJIVTER
-MA8GA1UEBxMIQnVkYXBlc3QxJzAlBgNVBAoTHk5ldExvY2sgSGFsb3phdGJpenRvbnNhZ2kgS2Z0
-LjEaMBgGA1UECxMRVGFudXNpdHZhbnlraWFkb2sxQjBABgNVBAMTOU5ldExvY2sgTWlub3NpdGV0
-dCBLb3pqZWd5em9pIChDbGFzcyBRQSkgVGFudXNpdHZhbnlraWFkbzEeMBwGCSqGSIb3DQEJARYP
-aW5mb0BuZXRsb2NrLmh1MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAx1Ilstg91IRV
-CacbvWy5FPSKAtt2/GoqeKvld/Bu4IwjZ9ulZJm53QE+b+8tmjwi8F3JV6BVQX/yQ15YglMxZc4e
-8ia6AFQer7C8HORSjKAyr7c3sVNnaHRnUPYtLmTeriZ539+Zhqurf4XsoPuAzPS4DB6TRWO53Lhb
-m+1bOdRfYrCnjnxmOCyqsQhjF2d9zL2z8cM/z1A57dEZgxXbhxInlrfa6uWdvLrqOU+L73Sa58XQ
-0uqGURzk/mQIKAR5BevKxXEOC++r6uwSEaEYBTJp0QwsGj0lmT+1fMptsK6ZmfoIYOcZwvK9UdPM
-0wKswREMgM6r3JSda6M5UzrWhQIDAMV9o4ICwDCCArwwEgYDVR0TAQH/BAgwBgEB/wIBBDAOBgNV
-HQ8BAf8EBAMCAQYwggJ1BglghkgBhvhCAQ0EggJmFoICYkZJR1lFTEVNISBFemVuIHRhbnVzaXR2
-YW55IGEgTmV0TG9jayBLZnQuIE1pbm9zaXRldHQgU3pvbGdhbHRhdGFzaSBTemFiYWx5emF0YWJh
-biBsZWlydCBlbGphcmFzb2sgYWxhcGphbiBrZXN6dWx0LiBBIG1pbm9zaXRldHQgZWxla3Ryb25p
-a3VzIGFsYWlyYXMgam9naGF0YXMgZXJ2ZW55ZXN1bGVzZW5laywgdmFsYW1pbnQgZWxmb2dhZGFz
-YW5hayBmZWx0ZXRlbGUgYSBNaW5vc2l0ZXR0IFN6b2xnYWx0YXRhc2kgU3phYmFseXphdGJhbiwg
-YXogQWx0YWxhbm9zIFN6ZXJ6b2Rlc2kgRmVsdGV0ZWxla2JlbiBlbG9pcnQgZWxsZW5vcnplc2kg
-ZWxqYXJhcyBtZWd0ZXRlbGUuIEEgZG9rdW1lbnR1bW9rIG1lZ3RhbGFsaGF0b2sgYSBodHRwczov
-L3d3dy5uZXRsb2NrLmh1L2RvY3MvIGNpbWVuIHZhZ3kga2VyaGV0b2sgYXogaW5mb0BuZXRsb2Nr
-Lm5ldCBlLW1haWwgY2ltZW4uIFdBUk5JTkchIFRoZSBpc3N1YW5jZSBhbmQgdGhlIHVzZSBvZiB0
-aGlzIGNlcnRpZmljYXRlIGFyZSBzdWJqZWN0IHRvIHRoZSBOZXRMb2NrIFF1YWxpZmllZCBDUFMg
-YXZhaWxhYmxlIGF0IGh0dHBzOi8vd3d3Lm5ldGxvY2suaHUvZG9jcy8gb3IgYnkgZS1tYWlsIGF0
-IGluZm9AbmV0bG9jay5uZXQwHQYDVR0OBBYEFAlqYhaSsFq7VQ7LdTI6MuWyIckoMA0GCSqGSIb3
-DQEBBQUAA4IBAQCRalCc23iBmz+LQuM7/KbD7kPgz/PigDVJRXYC4uMvBcXxKufAQTPGtpvQMznN
-wNuhrWw3AkxYQTvyl5LGSKjN5Yo5iWH5Upfpvfb5lHTocQ68d4bDBsxafEp+NFAwLvt/MpqNPfMg
-W/hqyobzMUwsWYACff44yTB1HLdV47yfuqhthCgFdbOLDcCRVCHnpgu0mfVRQdzNo0ci2ccBgcTc
-R08m6h/t280NmPSjnLRzMkqWmf68f8glWPhY83ZmiVSkpj7EUFy6iRiCdUgh0k8T6GB+B3bbELVR
-5qq5aKrN9p2QdRLqOBrKROi3macqaJVmlaut74nLYKkGEsaUR+ko
------END CERTIFICATE-----
-
 NetLock Notary (Class A) Root
 =============================
 -----BEGIN CERTIFICATE-----
@@ -2433,37 +1668,6 @@ hGIAF728JRhX8tepb1mIvDS3LoV4nZbcFMMsilKbloxSZj2GFotHuFEJjOp9zYhys2AzsfAKRO8P
 UrbnBEI=
 -----END CERTIFICATE-----
 
-SwissSign Platinum CA - G2
-==========================
------BEGIN CERTIFICATE-----
-MIIFwTCCA6mgAwIBAgIITrIAZwwDXU8wDQYJKoZIhvcNAQEFBQAwSTELMAkGA1UEBhMCQ0gxFTAT
-BgNVBAoTDFN3aXNzU2lnbiBBRzEjMCEGA1UEAxMaU3dpc3NTaWduIFBsYXRpbnVtIENBIC0gRzIw
-HhcNMDYxMDI1MDgzNjAwWhcNMzYxMDI1MDgzNjAwWjBJMQswCQYDVQQGEwJDSDEVMBMGA1UEChMM
-U3dpc3NTaWduIEFHMSMwIQYDVQQDExpTd2lzc1NpZ24gUGxhdGludW0gQ0EgLSBHMjCCAiIwDQYJ
-KoZIhvcNAQEBBQADggIPADCCAgoCggIBAMrfogLi2vj8Bxax3mCq3pZcZB/HL37PZ/pEQtZ2Y5Wu
-669yIIpFR4ZieIbWIDkm9K6j/SPnpZy1IiEZtzeTIsBQnIJ71NUERFzLtMKfkr4k2HtnIuJpX+UF
-eNSH2XFwMyVTtIc7KZAoNppVRDBopIOXfw0enHb/FZ1glwCNioUD7IC+6ixuEFGSzH7VozPY1kne
-WCqv9hbrS3uQMpe5up1Y8fhXSQQeol0GcN1x2/ndi5objM89o03Oy3z2u5yg+gnOI2Ky6Q0f4nIo
-j5+saCB9bzuohTEJfwvH6GXp43gOCWcwizSC+13gzJ2BbWLuCB4ELE6b7P6pT1/9aXjvCR+htL/6
-8++QHkwFix7qepF6w9fl+zC8bBsQWJj3Gl/QKTIDE0ZNYWqFTFJ0LwYfexHihJfGmfNtf9dng34T
-aNhxKFrYzt3oEBSa/m0jh26OWnA81Y0JAKeqvLAxN23IhBQeW71FYyBrS3SMvds6DsHPWhaPpZjy
-domyExI7C3d3rLvlPClKknLKYRorXkzig3R3+jVIeoVNjZpTxN94ypeRSCtFKwH3HBqi7Ri6Cr2D
-+m+8jVeTO9TUps4e8aCxzqv9KyiaTxvXw3LbpMS/XUz13XuWae5ogObnmLo2t/5u7Su9IPhlGdpV
-CX4l3P5hYnL5fhgC72O00Puv5TtjjGePAgMBAAGjgawwgakwDgYDVR0PAQH/BAQDAgEGMA8GA1Ud
-EwEB/wQFMAMBAf8wHQYDVR0OBBYEFFCvzAeHFUdvOMW0ZdHelarp35zMMB8GA1UdIwQYMBaAFFCv
-zAeHFUdvOMW0ZdHelarp35zMMEYGA1UdIAQ/MD0wOwYJYIV0AVkBAQEBMC4wLAYIKwYBBQUHAgEW
-IGh0dHA6Ly9yZXBvc2l0b3J5LnN3aXNzc2lnbi5jb20vMA0GCSqGSIb3DQEBBQUAA4ICAQAIhab1
-Fgz8RBrBY+D5VUYI/HAcQiiWjrfFwUF1TglxeeVtlspLpYhg0DB0uMoI3LQwnkAHFmtllXcBrqS3
-NQuB2nEVqXQXOHtYyvkv+8Bldo1bAbl93oI9ZLi+FHSjClTTLJUYFzX1UWs/j6KWYTl4a0vlpqD4
-U99REJNi54Av4tHgvI42Rncz7Lj7jposiU0xEQ8mngS7twSNC/K5/FqdOxa3L8iYq/6KUFkuozv8
-KV2LwUvJ4ooTHbG/u0IdUt1O2BReEMYxB+9xJ/cbOQncguqLs5WGXv312l0xpuAxtpTmREl0xRbl
-9x8DYSjFyMsSoEJL+WuICI20MhjzdZ/EfwBPBZWcoxcCw7NTm6ogOSkrZvqdr16zktK1puEa+S1B
-aYEUtLS17Yk9zvupnTVCRLEcFHOBzyoBNZox1S2PbYTfgE1X4z/FhHXaicYwu+uPyyIIoK6q8QNs
-OktNCaUOcsZWayFCTiMlFGiudgp8DAdwZPmaL/YFOSbGDI8Zf0NebvRbFS/bYV3mZy8/CJT5YLSY
-Mdp08YSTcU1f+2BY0fvEwW2JorsgH51xkcsymxM9Pn2SUjWskpSi0xjCfMfqr3YFFt1nJ8J+HAci
-IfNAChs0B0QTwoRqjt8ZWr9/6x3iGjjRXK9HkmuAtTClyY3YqzGBH9/CZjfTk6mFhnll0g==
------END CERTIFICATE-----
-
 SwissSign Gold CA - G2
 ======================
 -----BEGIN CERTIFICATE-----
@@ -2666,36 +1870,6 @@ IGfE7vmLV2H0knZ9P4SNVbfo5azV8fUZVqZa+5Acr5Pr5RzUZ5ddBA6+C4OmF4O5MBKgxTMVBbkN
 +8cFduPYSo38NBejxiEovjBFMR7HeL5YYTisO+IBZQ==
 -----END CERTIFICATE-----
 
-DigiNotar Root CA
-=================
------BEGIN CERTIFICATE-----
-MIIFijCCA3KgAwIBAgIQDHbanJEMTiye/hXQWJM8TDANBgkqhkiG9w0BAQUFADBfMQswCQYDVQQG
-EwJOTDESMBAGA1UEChMJRGlnaU5vdGFyMRowGAYDVQQDExFEaWdpTm90YXIgUm9vdCBDQTEgMB4G
-CSqGSIb3DQEJARYRaW5mb0BkaWdpbm90YXIubmwwHhcNMDcwNTE2MTcxOTM2WhcNMjUwMzMxMTgx
-OTIxWjBfMQswCQYDVQQGEwJOTDESMBAGA1UEChMJRGlnaU5vdGFyMRowGAYDVQQDExFEaWdpTm90
-YXIgUm9vdCBDQTEgMB4GCSqGSIb3DQEJARYRaW5mb0BkaWdpbm90YXIubmwwggIiMA0GCSqGSIb3
-DQEBAQUAA4ICDwAwggIKAoICAQCssFjBAL3YIQgLK5r+blYwBZ8bd5AQQVzDDYcRd46B8cp86Yxq
-7Th0Nbva3/m7wAk3tJZzgX0zGpg595NvlX89ubF1h7pRSOiLcD6VBMXYtsMW2YiwsYcdcNqGtA8U
-i3rPENF0NqISe3eGSnnme98CEWilToauNFibJBN4ViIlHgGLS1Fx+4LMWZZpiFpoU8W5DQI3y0u8
-ZkqQfioLBQftFl9VkHXYRskbg+IIvvEjzJkd1ioPgyAVWCeCLvriIsJJsbkBgWqdbZ1Ad2h2TiEq
-bYRAhU52mXyC8/O3AlnUJgEbjt+tUwbRrhjd4rI6y9eIOI6sWym5GdOY+RgDz0iChmYLG2kPyes4
-iHomGgVMktck1JbyrFIto0fVUvY//s6EBnCmqj6i8rZWNBhXouSBbefK8GrTx5FrAoNBfBXva5pk
-XuPQPOWx63tdhvvL5ndJzaNl3Pe5nLjkC1+Tz8wwGjIczhxjlaX56uF0i57pK6kwe6AYHw4YC+Vb
-qdPRbB4HZ4+RS6mKvNJmqpMBiLKR+jFc1abBUggJzQpjotMipuih2TkGl/VujQKQjBR7P4DNG5y6
-xFhyI6+2Vp/GekIzKQc/gsnmHwUNzUwoNovTyD4cxojvXu6JZOkd69qJfjKmadHdzIif0dDJZiHc
-BmfFlHqabWJMfczgZICynkeOowIDAQABo0IwQDAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQE
-AwIBBjAdBgNVHQ4EFgQUiGi/4I41xDs4a2L3KDuEgcgM100wDQYJKoZIhvcNAQEFBQADggIBADsC
-jcs8MOhuoK3yc7NfniUTBAXT9uOLuwt5zlPe5JbF0a9zvNXD0EBVfEB/zRtfCdXyfJ9oHbtdzno5
-wozWmHvFg1Wo1X1AyuAe94leY12hE8JdiraKfADzI8PthV9xdvBoY6pFITlIYXg23PFDk9Qlx/KA
-ZeFTAnVR/Ho67zerhChXDNjU1JlWbOOi/lmEtDHoM/hklJRRl6s5xUvt2t2AC298KQ3EjopyDedT
-FLJgQT2EkTFoPSdE2+Xe9PpjRchMPpj1P0G6Tss3DbpmmPHdy59c91Q2gmssvBNhl0L4eLvMyKKf
-yvBovWsdst+Nbwed2o5nx0ceyrm/KkKRt2NTZvFCo+H0Wk1Ya7XkpDOtXHAd3ODy63MUkZoDweoA
-ZbwH/M8SESIsrqC9OuCiKthZ6SnTGDWkrBFfGbW1G/8iSlzGeuQX7yCpp/Q/rYqnmgQlnQ7KN+ZQ
-/YxCKQSa7LnPS3K94gg2ryMvYuXKAdNw23yCIywWMQzGNgeQerEfZ1jEO1hZibCMjFCz2IbLaKPE
-CudpSyDOwR5WS5WpI2jYMNjD67BVUc3l/Su49bsRn1NU9jQZjHkJNsphFyUXC4KYcwx3dMPVDceo
-EkzHp1RxRy4sGn3J4ys7SN4nhKdjNrN9j6BkOSQNPXuHr2ZcdBtLc7LljPCGmbjlxd+Ewbfr
------END CERTIFICATE-----
-
 Network Solutions Certificate Authority
 =======================================
 -----BEGIN CERTIFICATE-----
@@ -2763,30 +1937,6 @@ FAkK+qDmfQjGGoe9GKhzvSbKYAydzpmfz1wPMOG+FDHqAjAU9JM8SaczepBGR7NjfRObTrdvGDeA
 U/7dIOA1mjbRxwG55tzd8/8dLDoWV9mSOdY=
 -----END CERTIFICATE-----
 
-MD5 Collisions Forged Rogue CA 25c3
-===================================
------BEGIN CERTIFICATE-----
-MIIEMjCCA5ugAwIBAgIBQjANBgkqhkiG9w0BAQQFADBaMQswCQYDVQQGEwJVUzEcMBoGA1UEChMT
-RXF1aWZheCBTZWN1cmUgSW5jLjEtMCsGA1UEAxMkRXF1aWZheCBTZWN1cmUgR2xvYmFsIGVCdXNp
-bmVzcyBDQS0xMB4XDTA0MDczMTAwMDAwMVoXDTA0MDkwMjAwMDAwMVowPDE6MDgGA1UEAxMxTUQ1
-IENvbGxpc2lvbnMgSW5jLiAoaHR0cDovL3d3dy5waHJlZWRvbS5vcmcvbWQ1KTCBnzANBgkqhkiG
-9w0BAQEFAAOBjQAwgYkCgYEAuqZZySwo1iqw+O2fRqSkN+4OGWhZ0bMDmVHWFppeN2sV4A5L9YRk
-+KPbQW811ZsVH9vEOFJwgZdej6C193458DKsHq1E0rP6SMPOkZvs9Jx84Vr1yDdrmoPe58oglzFC
-cxWRaPSIr/koKMXpD3OwF0sTTJl10ETmfghsGvJPG0ECAwEAAaOCAiQwggIgMAsGA1UdDwQEAwIB
-xjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBSnBGAfq3JDCMV/CJBVVhzWzuY46zAfBgNVHSME
-GDAWgBS+qKB0clBrRLfJI9j7qP+zV2tobDCCAb4GCWCGSAGG+EIBDQSCAa8WggGrMwAAACdeOeCJ
-YQ9Oo8VFCza7AdFTqsMIj2/4Tz6Hh0QR3GDg35JV+bhzG1STxZ/QRsRgtjVizbmvHKhpGslbPJY3
-wO1n77v+wIucUC8pvYMino4I+qwTcKJYf2JiihH3ifbftmdZcxb7YxaKtJE4zi71tr5MpJRJ5GUR
-CkIVycEw4mnVRX2lJru5YexiZPA54ee8aNhQUZ4dYNPRo6cK+AMgoXABF5E2TwJwMYaD3fcP2Acd
-EbMTBKXc8K5QsSgOY2kqDIJvj0cz32yiBpLxT0W+2TA2oyuM1neuNWN/Tkyak0g22Z8CAwEAAaOB
-vTCBujAOBgNVHQ8BAf8EBAMCBPAwHQYDVR0OBBYEFM2mg/qlYDf3ljcXKd5BePGHiVXnMDsGA1Ud
-HwQ0MDIwMKAuoCyGKmh0dHA6Ly9jcmwuZ2VvdHJ1c3QuY29tL2NybHMvZ2xvYmFsY2ExLmNybDAf
-BgNVHSMEGDAWgBS+qKB0clBrRLfJI9j7qP+zV2tobDAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYB
-BQUHAwIwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQQFAAOBgQCnIQKN0Q6igHcl/UNgFY/s75BH
-1IRCFSYRHM3CPBApqbbfq1d1kdrlK7OQRRwwY1Y/itlQ+u1YbMBlrGZX3hzGdjv1AA6ORc5/TJDs
-K8bNs7SPYtD+t8UmckTt9phbrsvRlfXaCL5oRrF1yOwdjx56lPGqU3iiRa5U6tGedMh2Zw==
------END CERTIFICATE-----
-
 IGC/A
 =====
 -----BEGIN CERTIFICATE-----
@@ -2855,32 +2005,6 @@ hNVQA7bihKOmNqoROgHhGEvWRGizPflTdISzRpFGlgC3gCy24eMQ4tui5yiPAZZiFj4A4xylNoEY
 okxSdsARo27mHbrjWr42U8U+dY+GaSlYU7Wcu2+fXMUY7N0v4ZjJ/L7fCg0=
 -----END CERTIFICATE-----
 
-S-TRUST Authentication and Encryption Root CA 2005 PN
-=====================================================
------BEGIN CERTIFICATE-----
-MIIEezCCA2OgAwIBAgIQNxkY5lNUfBq1uMtZWts1tzANBgkqhkiG9w0BAQUFADCBrjELMAkGA1UE
-BhMCREUxIDAeBgNVBAgTF0JhZGVuLVd1ZXJ0dGVtYmVyZyAoQlcpMRIwEAYDVQQHEwlTdHV0dGdh
-cnQxKTAnBgNVBAoTIERldXRzY2hlciBTcGFya2Fzc2VuIFZlcmxhZyBHbWJIMT4wPAYDVQQDEzVT
-LVRSVVNUIEF1dGhlbnRpY2F0aW9uIGFuZCBFbmNyeXB0aW9uIFJvb3QgQ0EgMjAwNTpQTjAeFw0w
-NTA2MjIwMDAwMDBaFw0zMDA2MjEyMzU5NTlaMIGuMQswCQYDVQQGEwJERTEgMB4GA1UECBMXQmFk
-ZW4tV3VlcnR0ZW1iZXJnIChCVykxEjAQBgNVBAcTCVN0dXR0Z2FydDEpMCcGA1UEChMgRGV1dHNj
-aGVyIFNwYXJrYXNzZW4gVmVybGFnIEdtYkgxPjA8BgNVBAMTNVMtVFJVU1QgQXV0aGVudGljYXRp
-b24gYW5kIEVuY3J5cHRpb24gUm9vdCBDQSAyMDA1OlBOMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
-MIIBCgKCAQEA2bVKwdMz6tNGs9HiTNL1toPQb9UY6ZOvJ44TzbUlNlA0EmQpoVXhOmCTnijJ4/Ob
-4QSwI7+Vio5bG0F/WsPoTUzVJBY+h0jUJ67m91MduwwA7z5hca2/OnpYH5Q9XIHV1W/fuJvS9eXL
-g3KSwlOyggLrra1fFi2SU3bxibYs9cEv4KdKb6AwajLrmnQDaHgTncovmwsdvs91DSaXm8f1Xgqf
-eN+zvOyauu9VjxuapgdjKRdZYgkqeQd3peDRF2npW932kKvimAoA0SVtnteFhy+S8dF2g08LOlk3
-KC8zpxdQ1iALCvQm+Z845y2kuJuJja2tyWp9iRe79n+Ag3rm7QIDAQABo4GSMIGPMBIGA1UdEwEB
-/wQIMAYBAf8CAQAwDgYDVR0PAQH/BAQDAgEGMCkGA1UdEQQiMCCkHjAcMRowGAYDVQQDExFTVFJv
-bmxpbmUxLTIwNDgtNTAdBgNVHQ4EFgQUD8oeXHngovMpttKFswtKtWXsa1IwHwYDVR0jBBgwFoAU
-D8oeXHngovMpttKFswtKtWXsa1IwDQYJKoZIhvcNAQEFBQADggEBAK8B8O0ZPCjoTVy7pWMciDMD
-pwCHpB8gq9Yc4wYfl35UvbfRssnV2oDsF9eK9XvCAPbpEW+EoFolMeKJ+aQAPzFoLtU96G7m1R08
-P7K9n3frndOMusDXtk3sU5wPBG7qNWdX4wple5A64U8+wwCSersFiXOMy6ZNwPv2AtawB6MDwidA
-nwzkhYItr5pCHdDHjfhA7p0GVxzZotiAFP7hYy0yh9WUUpY6RsZxlj33mA6ykaqP2vROJAA5Veit
-F7nTNCtKqUDMFypVZUF0Qn71wK/Ik63yGFs9iQzbRzkk+OBM8h+wPQrKBU6JIRrjKpms/H+h8Q8b
-Hz2eBIPdltkdOpQ=
------END CERTIFICATE-----
-
 Microsec e-Szigno Root CA
 =========================
 -----BEGIN CERTIFICATE-----
@@ -3076,28 +2200,6 @@ dyd1Lx+4ivn+xbrYNuSD7Odlt79jWvNGr4GUN9RBjNYj1h7P9WgbRGOiWrqnNVmh5XAFmw4jV5mU
 Cm26OWMohpLzGITY+9HPBVZkVw==
 -----END CERTIFICATE-----
 
-ComSign CA
-==========
------BEGIN CERTIFICATE-----
-MIIDkzCCAnugAwIBAgIQFBOWgxRVjOp7Y+X8NId3RDANBgkqhkiG9w0BAQUFADA0MRMwEQYDVQQD
-EwpDb21TaWduIENBMRAwDgYDVQQKEwdDb21TaWduMQswCQYDVQQGEwJJTDAeFw0wNDAzMjQxMTMy
-MThaFw0yOTAzMTkxNTAyMThaMDQxEzARBgNVBAMTCkNvbVNpZ24gQ0ExEDAOBgNVBAoTB0NvbVNp
-Z24xCzAJBgNVBAYTAklMMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA8ORUaSvTx49q
-ROR+WCf4C9DklBKK8Rs4OC8fMZwG1Cyn3gsqrhqg455qv588x26i+YtkbDqthVVRVKU4VbirgwTy
-P2Q298CNQ0NqZtH3FyrV7zb6MBBC11PN+fozc0yz6YQgitZBJzXkOPqUm7h65HkfM/sb2CEJKHxN
-GGleZIp6GZPKfuzzcuc3B1hZKKxC+cX/zT/npfo4sdAMx9lSGlPWgcxCejVb7Us6eva1jsz/D3zk
-YDaHL63woSV9/9JLEYhwVKZBqGdTUkJe5DSe5L6j7KpiXd3DTKaCQeQzC6zJMw9kglcq/QytNuEM
-rkvF7zuZ2SOzW120V+x0cAwqTwIDAQABo4GgMIGdMAwGA1UdEwQFMAMBAf8wPQYDVR0fBDYwNDAy
-oDCgLoYsaHR0cDovL2ZlZGlyLmNvbXNpZ24uY28uaWwvY3JsL0NvbVNpZ25DQS5jcmwwDgYDVR0P
-AQH/BAQDAgGGMB8GA1UdIwQYMBaAFEsBmz5WGmU2dst7l6qSBe4y5ygxMB0GA1UdDgQWBBRLAZs+
-VhplNnbLe5eqkgXuMucoMTANBgkqhkiG9w0BAQUFAAOCAQEA0Nmlfv4pYEWdfoPPbrxHbvUanlR2
-QnG0PFg/LUAlQvaBnPGJEMgOqnhPOAlXsDzACPw1jvFIUY0McXS6hMTXcpuEfDhOZAYnKuGntewI
-mbQKDdSFc8gS4TXt8QUxHXOZDOuWyt3T5oWq8Ir7dcHyCTxlZWTzTNity4hp8+SDtwy9F1qWF8pb
-/627HOkthIDYIb6FUtnUdLlphbpN7Sgy6/lhSuTENh4Z3G+EER+V9YMoGKgzkkMn3V0TBEVPh9VG
-zT2ouvDzuFYkRes3x+F2T3I5GN9+dHLHcy056mDmrRGiVod7w2ia/viMcKjfZTL0pECMocJEAw6U
-AGegcQCCSA==
------END CERTIFICATE-----
-
 ComSign Secured CA
 ==================
 -----BEGIN CERTIFICATE-----
@@ -3646,22 +2748,6 @@ MCwXEGCSn1WHElkQwg9naRHMTh5+Spqtr0CodaxWkHS4oJyleW/c6RrIaQXpuvoDs3zk4E7Czp3o
 tkYNbn5XOmeUwssfnHdKZ05phkOTOPu220+DkdRgfks+KzgHVZhepA==
 -----END CERTIFICATE-----
 
-Verisign Class 1 Public Primary Certification Authority
-=======================================================
------BEGIN CERTIFICATE-----
-MIICPDCCAaUCED9pHoGc8JpK83P/uUii5N0wDQYJKoZIhvcNAQEFBQAwXzELMAkGA1UEBhMCVVMx
-FzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAxIFB1YmxpYyBQcmltYXJ5
-IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVow
-XzELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAx
-IFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUA
-A4GNADCBiQKBgQDlGb9to1ZhLZlIcfZn3rmN67eehoAKkQ76OCWvRoiC5XOooJskXQ0fzGVuDLDQ
-VoQYh5oGmxChc9+0WDlrbsH2FdWoqD+qEgaNMax/sDTXjzRniAnNFBHiTkVWaR94AoDa3EeRKbs2
-yWNcxeDXLYd7obcysHswuiovMaruo2fa2wIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAFgVKTk8d6Pa
-XCUDfGD67gmZPCcQcMgMCeazh88K4hiWNWLMv5sneYlfycQJ9M61Hd8qveXbhpxoJeUwfLaJFf5n
-0a3hUKw8fGJLj7qE1xIVGx/KXQ/BUpQqEZnae88MNhPVNdwQGVnqlMEAv3WP2fr9dgTbYruQagPZ
-RjXZ+Hxb
------END CERTIFICATE-----
-
 Verisign Class 3 Public Primary Certification Authority
 =======================================================
 -----BEGIN CERTIFICATE-----
@@ -3908,3 +2994,338 @@ P3iZ8ntxPjzxmKfFGBI/5rsoM0LpRQp8bfKGeS/Fghl9CYl8slR2iK7ewfPM4W7bMdaTrpmg7yVq
 c5iJWzouE4gev8CSlDQb4ye3ix5vQv/n6TebUB0tovkC7stYWDpxvGjjqsGvHCgfotwjZT+B6q6Z
 09gwzxMNTxXJhLynSC34MCN32EZLeW32jO06f2ARePTpm67VVMB0gNELQp/B
 -----END CERTIFICATE-----
+
+Go Daddy Root Certificate Authority - G2
+========================================
+-----BEGIN CERTIFICATE-----
+MIIDxTCCAq2gAwIBAgIBADANBgkqhkiG9w0BAQsFADCBgzELMAkGA1UEBhMCVVMxEDAOBgNVBAgT
+B0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxGjAYBgNVBAoTEUdvRGFkZHkuY29tLCBJbmMu
+MTEwLwYDVQQDEyhHbyBEYWRkeSBSb290IENlcnRpZmljYXRlIEF1dGhvcml0eSAtIEcyMB4XDTA5
+MDkwMTAwMDAwMFoXDTM3MTIzMTIzNTk1OVowgYMxCzAJBgNVBAYTAlVTMRAwDgYDVQQIEwdBcml6
+b25hMRMwEQYDVQQHEwpTY290dHNkYWxlMRowGAYDVQQKExFHb0RhZGR5LmNvbSwgSW5jLjExMC8G
+A1UEAxMoR28gRGFkZHkgUm9vdCBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkgLSBHMjCCASIwDQYJKoZI
+hvcNAQEBBQADggEPADCCAQoCggEBAL9xYgjx+lk09xvJGKP3gElY6SKDE6bFIEMBO4Tx5oVJnyfq
+9oQbTqC023CYxzIBsQU+B07u9PpPL1kwIuerGVZr4oAH/PMWdYA5UXvl+TW2dE6pjYIT5LY/qQOD
++qK+ihVqf94Lw7YZFAXK6sOoBJQ7RnwyDfMAZiLIjWltNowRGLfTshxgtDj6AozO091GB94KPutd
+fMh8+7ArU6SSYmlRJQVhGkSBjCypQ5Yj36w6gZoOKcUcqeldHraenjAKOc7xiID7S13MMuyFYkMl
+NAJWJwGRtDtwKj9useiciAF9n9T521NtYJ2/LOdYq7hfRvzOxBsDPAnrSTFcaUaz4EcCAwEAAaNC
+MEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMCAQYwHQYDVR0OBBYEFDqahQcQZyi27/a9
+BUFuIMGU2g/eMA0GCSqGSIb3DQEBCwUAA4IBAQCZ21151fmXWWcDYfF+OwYxdS2hII5PZYe096ac
+vNjpL9DbWu7PdIxztDhC2gV7+AJ1uP2lsdeu9tfeE8tTEH6KRtGX+rcuKxGrkLAngPnon1rpN5+r
+5N9ss4UXnT3ZJE95kTXWXwTrgIOrmgIttRD02JDHBHNA7XIloKmf7J6raBKZV8aPEjoJpL1E/QYV
+N8Gb5DKj7Tjo2GTzLH4U/ALqn83/B2gX2yKQOC16jdFU8WnjXzPKej17CuPKf1855eJ1usV2GDPO
+LPAvTK33sefOT6jEm0pUBsV/fdUID+Ic/n4XuKxe9tQWskMJDE32p2u0mYRlynqI4uJEvlz36hz1
+-----END CERTIFICATE-----
+
+Starfield Root Certificate Authority - G2
+=========================================
+-----BEGIN CERTIFICATE-----
+MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQsFADCBjzELMAkGA1UEBhMCVVMxEDAOBgNVBAgT
+B0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxJTAjBgNVBAoTHFN0YXJmaWVsZCBUZWNobm9s
+b2dpZXMsIEluYy4xMjAwBgNVBAMTKVN0YXJmaWVsZCBSb290IENlcnRpZmljYXRlIEF1dGhvcml0
+eSAtIEcyMB4XDTA5MDkwMTAwMDAwMFoXDTM3MTIzMTIzNTk1OVowgY8xCzAJBgNVBAYTAlVTMRAw
+DgYDVQQIEwdBcml6b25hMRMwEQYDVQQHEwpTY290dHNkYWxlMSUwIwYDVQQKExxTdGFyZmllbGQg
+VGVjaG5vbG9naWVzLCBJbmMuMTIwMAYDVQQDEylTdGFyZmllbGQgUm9vdCBDZXJ0aWZpY2F0ZSBB
+dXRob3JpdHkgLSBHMjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAL3twQP89o/8ArFv
+W59I2Z154qK3A2FWGMNHttfKPTUuiUP3oWmb3ooa/RMgnLRJdzIpVv257IzdIvpy3Cdhl+72WoTs
+bhm5iSzchFvVdPtrX8WJpRBSiUZV9Lh1HOZ/5FSuS/hVclcCGfgXcVnrHigHdMWdSL5stPSksPNk
+N3mSwOxGXn/hbVNMYq/NHwtjuzqd+/x5AJhhdM8mgkBj87JyahkNmcrUDnXMN/uLicFZ8WJ/X7Nf
+ZTD4p7dNdloedl40wOiWVpmKs/B/pM293DIxfJHP4F8R+GuqSVzRmZTRouNjWwl2tVZi4Ut0HZbU
+JtQIBFnQmA4O5t78w+wfkPECAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
+AQYwHQYDVR0OBBYEFHwMMh+n2TB/xH1oo2Kooc6rB1snMA0GCSqGSIb3DQEBCwUAA4IBAQARWfol
+TwNvlJk7mh+ChTnUdgWUXuEok21iXQnCoKjUsHU48TRqneSfioYmUeYs0cYtbpUgSpIB7LiKZ3sx
+4mcujJUDJi5DnUox9g61DLu34jd/IroAow57UvtruzvE03lRTs2Q9GcHGcg8RnoNAX3FWOdt5oUw
+F5okxBDgBPfg8n/Uqgr/Qh037ZTlZFkSIHc40zI+OIF1lnP6aI+xy84fxez6nH7PfrHxBy22/L/K
+pL/QlwVKvOoYKAKQvVR4CSFx09F9HdkWsKlhPdAKACL8x3vLCWRFCztAgfd9fDL1mMpYjn0q7pBZ
+c2T5NnReJaH1ZgUufzkVqSr7UIuOhWn0
+-----END CERTIFICATE-----
+
+Starfield Services Root Certificate Authority - G2
+==================================================
+-----BEGIN CERTIFICATE-----
+MIID7zCCAtegAwIBAgIBADANBgkqhkiG9w0BAQsFADCBmDELMAkGA1UEBhMCVVMxEDAOBgNVBAgT
+B0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxJTAjBgNVBAoTHFN0YXJmaWVsZCBUZWNobm9s
+b2dpZXMsIEluYy4xOzA5BgNVBAMTMlN0YXJmaWVsZCBTZXJ2aWNlcyBSb290IENlcnRpZmljYXRl
+IEF1dGhvcml0eSAtIEcyMB4XDTA5MDkwMTAwMDAwMFoXDTM3MTIzMTIzNTk1OVowgZgxCzAJBgNV
+BAYTAlVTMRAwDgYDVQQIEwdBcml6b25hMRMwEQYDVQQHEwpTY290dHNkYWxlMSUwIwYDVQQKExxT
+dGFyZmllbGQgVGVjaG5vbG9naWVzLCBJbmMuMTswOQYDVQQDEzJTdGFyZmllbGQgU2VydmljZXMg
+Um9vdCBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkgLSBHMjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC
+AQoCggEBANUMOsQq+U7i9b4Zl1+OiFOxHz/Lz58gE20pOsgPfTz3a3Y4Y9k2YKibXlwAgLIvWX/2
+h/klQ4bnaRtSmpDhcePYLQ1Ob/bISdm28xpWriu2dBTrz/sm4xq6HZYuajtYlIlHVv8loJNwU4Pa
+hHQUw2eeBGg6345AWh1KTs9DkTvnVtYAcMtS7nt9rjrnvDH5RfbCYM8TWQIrgMw0R9+53pBlbQLP
+LJGmpufehRhJfGZOozptqbXuNC66DQO4M99H67FrjSXZm86B0UVGMpZwh94CDklDhbZsc7tk6mFB
+rMnUVN+HL8cisibMn1lUaJ/8viovxFUcdUBgF4UCVTmLfwUCAwEAAaNCMEAwDwYDVR0TAQH/BAUw
+AwEB/zAOBgNVHQ8BAf8EBAMCAQYwHQYDVR0OBBYEFJxfAN+qAdcwKziIorhtSpzyEZGDMA0GCSqG
+SIb3DQEBCwUAA4IBAQBLNqaEd2ndOxmfZyMIbw5hyf2E3F/YNoHN2BtBLZ9g3ccaaNnRbobhiCPP
+E95Dz+I0swSdHynVv/heyNXBve6SbzJ08pGCL72CQnqtKrcgfU28elUSwhXqvfdqlS5sdJ/PHLTy
+xQGjhdByPq1zqwubdQxtRbeOlKyWN7Wg0I8VRw7j6IPdj/3vQQF3zCepYoUz8jcI73HPdwbeyBkd
+iEDPfUYd/x7H4c7/I9vG+o1VTqkC50cRRj70/b17KSa7qWFiNyi2LSr2EIZkyXCn0q23KXB56jza
+YyWf/Wi3MOxw+3WKt21gZ7IeyLnp2KhvAotnDU0mV3HaIPzBSlCNsSi6
+-----END CERTIFICATE-----
+
+AffirmTrust Commercial
+======================
+-----BEGIN CERTIFICATE-----
+MIIDTDCCAjSgAwIBAgIId3cGJyapsXwwDQYJKoZIhvcNAQELBQAwRDELMAkGA1UEBhMCVVMxFDAS
+BgNVBAoMC0FmZmlybVRydXN0MR8wHQYDVQQDDBZBZmZpcm1UcnVzdCBDb21tZXJjaWFsMB4XDTEw
+MDEyOTE0MDYwNloXDTMwMTIzMTE0MDYwNlowRDELMAkGA1UEBhMCVVMxFDASBgNVBAoMC0FmZmly
+bVRydXN0MR8wHQYDVQQDDBZBZmZpcm1UcnVzdCBDb21tZXJjaWFsMIIBIjANBgkqhkiG9w0BAQEF
+AAOCAQ8AMIIBCgKCAQEA9htPZwcroRX1BiLLHwGy43NFBkRJLLtJJRTWzsO3qyxPxkEylFf6Eqdb
+DuKPHx6GGaeqtS25Xw2Kwq+FNXkyLbscYjfysVtKPcrNcV/pQr6U6Mje+SJIZMblq8Yrba0F8PrV
+C8+a5fBQpIs7R6UjW3p6+DM/uO+Zl+MgwdYoic+U+7lF7eNAFxHUdPALMeIrJmqbTFeurCA+ukV6
+BfO9m2kVrn1OIGPENXY6BwLJN/3HR+7o8XYdcxXyl6S1yHp52UKqK39c/s4mT6NmgTWvRLpUHhww
+MmWd5jyTXlBOeuM61G7MGvv50jeuJCqrVwMiKA1JdX+3KNp1v47j3A55MQIDAQABo0IwQDAdBgNV
+HQ4EFgQUnZPGU4teyq8/nx4P5ZmVvCT2lI8wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
+AQYwDQYJKoZIhvcNAQELBQADggEBAFis9AQOzcAN/wr91LoWXym9e2iZWEnStB03TX8nfUYGXUPG
+hi4+c7ImfU+TqbbEKpqrIZcUsd6M06uJFdhrJNTxFq7YpFzUf1GO7RgBsZNjvbz4YYCanrHOQnDi
+qX0GJX0nof5v7LMeJNrjS1UaADs1tDvZ110w/YETifLCBivtZ8SOyUOyXGsViQK8YvxO8rUzqrJv
+0wqiUOP2O+guRMLbZjipM1ZI8W0bM40NjD9gN53Tym1+NH4Nn3J2ixufcv1SNUFFApYvHLKac0kh
+sUlHRUe072o0EclNmsxZt9YCnlpOZbWUrhvfKbAW8b8Angc6F2S1BLUjIZkKlTuXfO8=
+-----END CERTIFICATE-----
+
+AffirmTrust Networking
+======================
+-----BEGIN CERTIFICATE-----
+MIIDTDCCAjSgAwIBAgIIfE8EORzUmS0wDQYJKoZIhvcNAQEFBQAwRDELMAkGA1UEBhMCVVMxFDAS
+BgNVBAoMC0FmZmlybVRydXN0MR8wHQYDVQQDDBZBZmZpcm1UcnVzdCBOZXR3b3JraW5nMB4XDTEw
+MDEyOTE0MDgyNFoXDTMwMTIzMTE0MDgyNFowRDELMAkGA1UEBhMCVVMxFDASBgNVBAoMC0FmZmly
+bVRydXN0MR8wHQYDVQQDDBZBZmZpcm1UcnVzdCBOZXR3b3JraW5nMIIBIjANBgkqhkiG9w0BAQEF
+AAOCAQ8AMIIBCgKCAQEAtITMMxcua5Rsa2FSoOujz3mUTOWUgJnLVWREZY9nZOIG41w3SfYvm4SE
+Hi3yYJ0wTsyEheIszx6e/jarM3c1RNg1lho9Nuh6DtjVR6FqaYvZ/Ls6rnla1fTWcbuakCNrmreI
+dIcMHl+5ni36q1Mr3Lt2PpNMCAiMHqIjHNRqrSK6mQEubWXLviRmVSRLQESxG9fhwoXA3hA/Pe24
+/PHxI1Pcv2WXb9n5QHGNfb2V1M6+oF4nI979ptAmDgAp6zxG8D1gvz9Q0twmQVGeFDdCBKNwV6gb
+h+0t+nvujArjqWaJGctB+d1ENmHP4ndGyH329JKBNv3bNPFyfvMMFr20FQIDAQABo0IwQDAdBgNV
+HQ4EFgQUBx/S55zawm6iQLSwelAQUHTEyL0wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
+AQYwDQYJKoZIhvcNAQEFBQADggEBAIlXshZ6qML91tmbmzTCnLQyFE2npN/svqe++EPbkTfOtDIu
+UFUaNU52Q3Eg75N3ThVwLofDwR1t3Mu1J9QsVtFSUzpE0nPIxBsFZVpikpzuQY0x2+c06lkh1QF6
+12S4ZDnNye2v7UsDSKegmQGA3GWjNq5lWUhPgkvIZfFXHeVZLgo/bNjR9eUJtGxUAArgFU2HdW23
+WJZa3W3SAKD0m0i+wzekujbgfIeFlxoVot4uolu9rxj5kFDNcFn4J2dHy8egBzp90SxdbBk6ZrV9
+/ZFvgrG+CJPbFEfxojfHRZ48x3evZKiT3/Zpg4Jg8klCNO1aAFSFHBY2kgxc+qatv9s=
+-----END CERTIFICATE-----
+
+AffirmTrust Premium
+===================
+-----BEGIN CERTIFICATE-----
+MIIFRjCCAy6gAwIBAgIIbYwURrGmCu4wDQYJKoZIhvcNAQEMBQAwQTELMAkGA1UEBhMCVVMxFDAS
+BgNVBAoMC0FmZmlybVRydXN0MRwwGgYDVQQDDBNBZmZpcm1UcnVzdCBQcmVtaXVtMB4XDTEwMDEy
+OTE0MTAzNloXDTQwMTIzMTE0MTAzNlowQTELMAkGA1UEBhMCVVMxFDASBgNVBAoMC0FmZmlybVRy
+dXN0MRwwGgYDVQQDDBNBZmZpcm1UcnVzdCBQcmVtaXVtMIICIjANBgkqhkiG9w0BAQEFAAOCAg8A
+MIICCgKCAgEAxBLfqV/+Qd3d9Z+K4/as4Tx4mrzY8H96oDMq3I0gW64tb+eT2TZwamjPjlGjhVtn
+BKAQJG9dKILBl1fYSCkTtuG+kU3fhQxTGJoeJKJPj/CihQvL9Cl/0qRY7iZNyaqoe5rZ+jjeRFcV
+5fiMyNlI4g0WJx0eyIOFJbe6qlVBzAMiSy2RjYvmia9mx+n/K+k8rNrSs8PhaJyJ+HoAVt70VZVs
++7pk3WKL3wt3MutizCaam7uqYoNMtAZ6MMgpv+0GTZe5HMQxK9VfvFMSF5yZVylmd2EhMQcuJUmd
+GPLu8ytxjLW6OQdJd/zvLpKQBY0tL3d770O/Nbua2Plzpyzy0FfuKE4mX4+QaAkvuPjcBukumj5R
+p9EixAqnOEhss/n/fauGV+O61oV4d7pD6kh/9ti+I20ev9E2bFhc8e6kGVQa9QPSdubhjL08s9NI
+S+LI+H+SqHZGnEJlPqQewQcDWkYtuJfzt9WyVSHvutxMAJf7FJUnM7/oQ0dG0giZFmA7mn7S5u04
+6uwBHjxIVkkJx0w3AJ6IDsBz4W9m6XJHMD4Q5QsDyZpCAGzFlH5hxIrff4IaC1nEWTJ3s7xgaVY5
+/bQGeyzWZDbZvUjthB9+pSKPKrhC9IK31FOQeE4tGv2Bb0TXOwF0lkLgAOIua+rF7nKsu7/+6qqo
++Nz2snmKtmcCAwEAAaNCMEAwHQYDVR0OBBYEFJ3AZ6YMItkm9UWrpmVSESfYRaxjMA8GA1UdEwEB
+/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMA0GCSqGSIb3DQEBDAUAA4ICAQCzV00QYk465KzquByv
+MiPIs0laUZx2KI15qldGF9X1Uva3ROgIRL8YhNILgM3FEv0AVQVhh0HctSSePMTYyPtwni94loMg
+Nt58D2kTiKV1NpgIpsbfrM7jWNa3Pt668+s0QNiigfV4Py/VpfzZotReBA4Xrf5B8OWycvpEgjNC
+6C1Y91aMYj+6QrCcDFx+LmUmXFNPALJ4fqENmS2NuB2OosSw/WDQMKSOyARiqcTtNd56l+0OOF6S
+L5Nwpamcb6d9Ex1+xghIsV5n61EIJenmJWtSKZGc0jlzCFfemQa0W50QBuHCAKi4HEoCChTQwUHK
++4w1IX2COPKpVJEZNZOUbWo6xbLQu4mGk+ibyQ86p3q4ofB4Rvr8Ny/lioTz3/4E2aFooC8k4gmV
+BtWVyuEklut89pMFu+1z6S3RdTnX5yTb2E5fQ4+e0BQ5v1VwSJlXMbSc7kqYA5YwH2AG7hsj/oFg
+IxpHYoWlzBk0gG+zrBrjn/B7SK3VAdlntqlyk+otZrWyuOQ9PLLvTIzq6we/qzWaVYa8GKa1qF60
+g2xraUDTn9zxw2lrueFtCfTxqlB2Cnp9ehehVZZCmTEJ3WARjQUwfuaORtGdFNrHF+QFlozEJLUb
+zxQHskD4o55BhrwE0GuWyCqANP2/7waj3VjFhT0+j/6eKeC2uAloGRwYQw==
+-----END CERTIFICATE-----
+
+AffirmTrust Premium ECC
+=======================
+-----BEGIN CERTIFICATE-----
+MIIB/jCCAYWgAwIBAgIIdJclisc/elQwCgYIKoZIzj0EAwMwRTELMAkGA1UEBhMCVVMxFDASBgNV
+BAoMC0FmZmlybVRydXN0MSAwHgYDVQQDDBdBZmZpcm1UcnVzdCBQcmVtaXVtIEVDQzAeFw0xMDAx
+MjkxNDIwMjRaFw00MDEyMzExNDIwMjRaMEUxCzAJBgNVBAYTAlVTMRQwEgYDVQQKDAtBZmZpcm1U
+cnVzdDEgMB4GA1UEAwwXQWZmaXJtVHJ1c3QgUHJlbWl1bSBFQ0MwdjAQBgcqhkjOPQIBBgUrgQQA
+IgNiAAQNMF4bFZ0D0KF5Nbc6PJJ6yhUczWLznCZcBz3lVPqj1swS6vQUX+iOGasvLkjmrBhDeKzQ
+N8O9ss0s5kfiGuZjuD0uL3jET9v0D6RoTFVya5UdThhClXjMNzyR4ptlKymjQjBAMB0GA1UdDgQW
+BBSaryl6wBE1NSZRMADDav5A1a7WPDAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQEAwIBBjAK
+BggqhkjOPQQDAwNnADBkAjAXCfOHiFBar8jAQr9HX/VsaobgxCd05DhT1wV/GzTjxi+zygk8N53X
+57hG8f2h4nECMEJZh0PUUd+60wkyWs6Iflc9nF9Ca/UHLbXwgpP5WW+uZPpY5Yse42O+tYHNbwKM
+eQ==
+-----END CERTIFICATE-----
+
+Certum Trusted Network CA
+=========================
+-----BEGIN CERTIFICATE-----
+MIIDuzCCAqOgAwIBAgIDBETAMA0GCSqGSIb3DQEBBQUAMH4xCzAJBgNVBAYTAlBMMSIwIAYDVQQK
+ExlVbml6ZXRvIFRlY2hub2xvZ2llcyBTLkEuMScwJQYDVQQLEx5DZXJ0dW0gQ2VydGlmaWNhdGlv
+biBBdXRob3JpdHkxIjAgBgNVBAMTGUNlcnR1bSBUcnVzdGVkIE5ldHdvcmsgQ0EwHhcNMDgxMDIy
+MTIwNzM3WhcNMjkxMjMxMTIwNzM3WjB+MQswCQYDVQQGEwJQTDEiMCAGA1UEChMZVW5pemV0byBU
+ZWNobm9sb2dpZXMgUy5BLjEnMCUGA1UECxMeQ2VydHVtIENlcnRpZmljYXRpb24gQXV0aG9yaXR5
+MSIwIAYDVQQDExlDZXJ0dW0gVHJ1c3RlZCBOZXR3b3JrIENBMIIBIjANBgkqhkiG9w0BAQEFAAOC
+AQ8AMIIBCgKCAQEA4/t9o3K6wvDJFIf1awFO4W5AB7ptJ11/91sts1rHUV+rpDKmYYe2bg+G0jAC
+l/jXaVehGDldamR5xgFZrDwxSjh80gTSSyjoIF87B6LMTXPb865Px1bVWqeWifrzq2jUI4ZZJ88J
+J7ysbnKDHDBy3+Ci6dLhdHUZvSqeexVUBBvXQzmtVSjF4hq79MDkrjhJM8x2hZ85RdKknvISjFH4
+fOQtf/WsX+sWn7Et0brMkUJ3TCXJkDhv2/DM+44el1k+1WBO5gUo7Ul5E0u6SNsv+XLTOcr+H9g0
+cvW0QM8xAcPs3hEtF10fuFDRXhmnad4HMyjKUJX5p1TLVIZQRan5SQIDAQABo0IwQDAPBgNVHRMB
+Af8EBTADAQH/MB0GA1UdDgQWBBQIds3LB/8k9sXN7buQvOKEN0Z19zAOBgNVHQ8BAf8EBAMCAQYw
+DQYJKoZIhvcNAQEFBQADggEBAKaorSLOAT2mo/9i0Eidi15ysHhE49wcrwn9I0j6vSrEuVUEtRCj
+jSfeC4Jj0O7eDDd5QVsisrCaQVymcODU0HfLI9MA4GxWL+FpDQ3Zqr8hgVDZBqWo/5U30Kr+4rP1
+mS1FhIrlQgnXdAIv94nYmem8J9RHjboNRhx3zxSkHLmkMcScKHQDNP8zGSal6Q10tz6XxnboJ5aj
+Zt3hrvJBW8qYVoNzcOSGGtIxQbovvi0TWnZvTuhOgQ4/WwMioBK+ZlgRSssDxLQqKi2WF+A5VLxI
+03YnnZotBqbJ7DnSq9ufmgsnAjUpsUCV5/nonFWIGUbWtzT1fs45mtk48VH3Tyw=
+-----END CERTIFICATE-----
+
+Certinomis - Autorité Racine
+=============================
+-----BEGIN CERTIFICATE-----
+MIIFnDCCA4SgAwIBAgIBATANBgkqhkiG9w0BAQUFADBjMQswCQYDVQQGEwJGUjETMBEGA1UEChMK
+Q2VydGlub21pczEXMBUGA1UECxMOMDAwMiA0MzM5OTg5MDMxJjAkBgNVBAMMHUNlcnRpbm9taXMg
+LSBBdXRvcml0w6kgUmFjaW5lMB4XDTA4MDkxNzA4Mjg1OVoXDTI4MDkxNzA4Mjg1OVowYzELMAkG
+A1UEBhMCRlIxEzARBgNVBAoTCkNlcnRpbm9taXMxFzAVBgNVBAsTDjAwMDIgNDMzOTk4OTAzMSYw
+JAYDVQQDDB1DZXJ0aW5vbWlzIC0gQXV0b3JpdMOpIFJhY2luZTCCAiIwDQYJKoZIhvcNAQEBBQAD
+ggIPADCCAgoCggIBAJ2Fn4bT46/HsmtuM+Cet0I0VZ35gb5j2CN2DpdUzZlMGvE5x4jYF1AMnmHa
+wE5V3udauHpOd4cN5bjr+p5eex7Ezyh0x5P1FMYiKAT5kcOrJ3NqDi5N8y4oH3DfVS9O7cdxbwly
+Lu3VMpfQ8Vh30WC8Tl7bmoT2R2FFK/ZQpn9qcSdIhDWerP5pqZ56XjUl+rSnSTV3lqc2W+HN3yNw
+2F1MpQiD8aYkOBOo7C+ooWfHpi2GR+6K/OybDnT0K0kCe5B1jPyZOQE51kqJ5Z52qz6WKDgmi92N
+jMD2AR5vpTESOH2VwnHu7XSu5DaiQ3XV8QCb4uTXzEIDS3h65X27uK4uIJPT5GHfceF2Z5c/tt9q
+c1pkIuVC28+BA5PY9OMQ4HL2AHCs8MF6DwV/zzRpRbWT5BnbUhYjBYkOjUjkJW+zeL9i9Qf6lSTC
+lrLooyPCXQP8w9PlfMl1I9f09bze5N/NgL+RiH2nE7Q5uiy6vdFrzPOlKO1Enn1So2+WLhl+HPNb
+xxaOu2B9d2ZHVIIAEWBsMsGoOBvrbpgT1u449fCfDu/+MYHB0iSVL1N6aaLwD4ZFjliCK0wi1F6g
+530mJ0jfJUaNSih8hp75mxpZuWW/Bd22Ql095gBIgl4g9xGC3srYn+Y3RyYe63j3YcNBZFgCQfna
+4NH4+ej9Uji29YnfAgMBAAGjWzBZMA8GA1UdEwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMB0G
+A1UdDgQWBBQNjLZh2kS40RR9w759XkjwzspqsDAXBgNVHSAEEDAOMAwGCiqBegFWAgIAAQEwDQYJ
+KoZIhvcNAQEFBQADggIBACQ+YAZ+He86PtvqrxyaLAEL9MW12Ukx9F1BjYkMTv9sov3/4gbIOZ/x
+WqndIlgVqIrTseYyCYIDbNc/CMf4uboAbbnW/FIyXaR/pDGUu7ZMOH8oMDX/nyNTt7buFHAAQCva
+R6s0fl6nVjBhK4tDrP22iCj1a7Y+YEq6QpA0Z43q619FVDsXrIvkxmUP7tCMXWY5zjKn2BCXwH40
+nJ+U8/aGH88bc62UeYdocMMzpXDn2NU4lG9jeeu/Cg4I58UvD0KgKxRA/yHgBcUn4YQRE7rWhh1B
+CxMjidPJC+iKunqjo3M3NYB9Ergzd0A4wPpeMNLytqOx1qKVl4GbUu1pTP+A5FPbVFsDbVRfsbjv
+JL1vnxHDx2TCDyhihWZeGnuyt++uNckZM6i4J9szVb9o4XVIRFb7zdNIu0eJOqxp9YDG5ERQL1TE
+qkPFMTFYvZbF6nVsmnWxTfj3l/+WFvKXTej28xH5On2KOG4Ey+HTRRWqpdEdnV1j6CTmNhTih60b
+WfVEm/vXd3wfAXBioSAaosUaKPQhA+4u2cGA6rnZgtZbdsLLO7XSAPCjDuGtbkD326C00EauFddE
+wk01+dIL8hf2rGbVJLJP0RyZwG71fet0BLj5TXcJ17TPBzAJ8bgAVtkXFhYKK4bfjwEZGuW7gmP/
+vgt2Fl43N+bYdJeimUV5
+-----END CERTIFICATE-----
+
+Root CA Generalitat Valenciana
+==============================
+-----BEGIN CERTIFICATE-----
+MIIGizCCBXOgAwIBAgIEO0XlaDANBgkqhkiG9w0BAQUFADBoMQswCQYDVQQGEwJFUzEfMB0GA1UE
+ChMWR2VuZXJhbGl0YXQgVmFsZW5jaWFuYTEPMA0GA1UECxMGUEtJR1ZBMScwJQYDVQQDEx5Sb290
+IENBIEdlbmVyYWxpdGF0IFZhbGVuY2lhbmEwHhcNMDEwNzA2MTYyMjQ3WhcNMjEwNzAxMTUyMjQ3
+WjBoMQswCQYDVQQGEwJFUzEfMB0GA1UEChMWR2VuZXJhbGl0YXQgVmFsZW5jaWFuYTEPMA0GA1UE
+CxMGUEtJR1ZBMScwJQYDVQQDEx5Sb290IENBIEdlbmVyYWxpdGF0IFZhbGVuY2lhbmEwggEiMA0G
+CSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDGKqtXETcvIorKA3Qdyu0togu8M1JAJke+WmmmO3I2
+F0zo37i7L3bhQEZ0ZQKQUgi0/6iMweDHiVYQOTPvaLRfX9ptI6GJXiKjSgbwJ/BXufjpTjJ3Cj9B
+ZPPrZe52/lSqfR0grvPXdMIKX/UIKFIIzFVd0g/bmoGlu6GzwZTNVOAydTGRGmKy3nXiz0+J2ZGQ
+D0EbtFpKd71ng+CT516nDOeB0/RSrFOyA8dEJvt55cs0YFAQexvba9dHq198aMpunUEDEO5rmXte
+JajCq+TA81yc477OMUxkHl6AovWDfgzWyoxVjr7gvkkHD6MkQXpYHYTqWBLI4bft75PelAgxAgMB
+AAGjggM7MIIDNzAyBggrBgEFBQcBAQQmMCQwIgYIKwYBBQUHMAGGFmh0dHA6Ly9vY3NwLnBraS5n
+dmEuZXMwEgYDVR0TAQH/BAgwBgEB/wIBAjCCAjQGA1UdIASCAiswggInMIICIwYKKwYBBAG/VQIB
+ADCCAhMwggHoBggrBgEFBQcCAjCCAdoeggHWAEEAdQB0AG8AcgBpAGQAYQBkACAAZABlACAAQwBl
+AHIAdABpAGYAaQBjAGEAYwBpAPMAbgAgAFIAYQDtAHoAIABkAGUAIABsAGEAIABHAGUAbgBlAHIA
+YQBsAGkAdABhAHQAIABWAGEAbABlAG4AYwBpAGEAbgBhAC4ADQAKAEwAYQAgAEQAZQBjAGwAYQBy
+AGEAYwBpAPMAbgAgAGQAZQAgAFAAcgDhAGMAdABpAGMAYQBzACAAZABlACAAQwBlAHIAdABpAGYA
+aQBjAGEAYwBpAPMAbgAgAHEAdQBlACAAcgBpAGcAZQAgAGUAbAAgAGYAdQBuAGMAaQBvAG4AYQBt
+AGkAZQBuAHQAbwAgAGQAZQAgAGwAYQAgAHAAcgBlAHMAZQBuAHQAZQAgAEEAdQB0AG8AcgBpAGQA
+YQBkACAAZABlACAAQwBlAHIAdABpAGYAaQBjAGEAYwBpAPMAbgAgAHMAZQAgAGUAbgBjAHUAZQBu
+AHQAcgBhACAAZQBuACAAbABhACAAZABpAHIAZQBjAGMAaQDzAG4AIAB3AGUAYgAgAGgAdAB0AHAA
+OgAvAC8AdwB3AHcALgBwAGsAaQAuAGcAdgBhAC4AZQBzAC8AYwBwAHMwJQYIKwYBBQUHAgEWGWh0
+dHA6Ly93d3cucGtpLmd2YS5lcy9jcHMwHQYDVR0OBBYEFHs100DSHHgZZu90ECjcPk+yeAT8MIGV
+BgNVHSMEgY0wgYqAFHs100DSHHgZZu90ECjcPk+yeAT8oWykajBoMQswCQYDVQQGEwJFUzEfMB0G
+A1UEChMWR2VuZXJhbGl0YXQgVmFsZW5jaWFuYTEPMA0GA1UECxMGUEtJR1ZBMScwJQYDVQQDEx5S
+b290IENBIEdlbmVyYWxpdGF0IFZhbGVuY2lhbmGCBDtF5WgwDQYJKoZIhvcNAQEFBQADggEBACRh
+TvW1yEICKrNcda3FbcrnlD+laJWIwVTAEGmiEi8YPyVQqHxK6sYJ2fR1xkDar1CdPaUWu20xxsdz
+Ckj+IHLtb8zog2EWRpABlUt9jppSCS/2bxzkoXHPjCpaF3ODR00PNvsETUlR4hTJZGH71BTg9J63
+NI8KJr2XXPR5OkowGcytT6CYirQxlyric21+eLj4iIlPsSKRZEv1UN4D2+XFducTZnV+ZfsBn5OH
+iJ35Rld8TWCvmHMTI6QgkYH60GFmuH3Rr9ZvHmw96RH9qfmCIoaZM3Fa6hlXPZHNqcCjbgcTpsnt
++GijnsNacgmHKNHEc8RzGF9QdRYxn7fofMM=
+-----END CERTIFICATE-----
+
+A-Trust-nQual-03
+================
+-----BEGIN CERTIFICATE-----
+MIIDzzCCAregAwIBAgIDAWweMA0GCSqGSIb3DQEBBQUAMIGNMQswCQYDVQQGEwJBVDFIMEYGA1UE
+Cgw/QS1UcnVzdCBHZXMuIGYuIFNpY2hlcmhlaXRzc3lzdGVtZSBpbSBlbGVrdHIuIERhdGVudmVy
+a2VociBHbWJIMRkwFwYDVQQLDBBBLVRydXN0LW5RdWFsLTAzMRkwFwYDVQQDDBBBLVRydXN0LW5R
+dWFsLTAzMB4XDTA1MDgxNzIyMDAwMFoXDTE1MDgxNzIyMDAwMFowgY0xCzAJBgNVBAYTAkFUMUgw
+RgYDVQQKDD9BLVRydXN0IEdlcy4gZi4gU2ljaGVyaGVpdHNzeXN0ZW1lIGltIGVsZWt0ci4gRGF0
+ZW52ZXJrZWhyIEdtYkgxGTAXBgNVBAsMEEEtVHJ1c3QtblF1YWwtMDMxGTAXBgNVBAMMEEEtVHJ1
+c3QtblF1YWwtMDMwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCtPWFuA/OQO8BBC4SA
+zewqo51ru27CQoT3URThoKgtUaNR8t4j8DRE/5TrzAUjlUC5B3ilJfYKvUWG6Nm9wASOhURh73+n
+yfrBJcyFLGM/BWBzSQXgYHiVEEvc+RFZznF/QJuKqiTfC0Li21a8StKlDJu3Qz7dg9MmEALP6iPE
+SU7l0+m0iKsMrmKS1GWH2WrX9IWf5DMiJaXlyDO6w8dB3F/GaswADm0yqLaHNgBid5seHzTLkDx4
+iHQF63n1k3Flyp3HaxgtPVxO59X4PzF9j4fsCiIvI+n+u33J4PTs63zEsMMtYrWacdaxaujs2e3V
+cuy+VwHOBVWf3tFgiBCzAgMBAAGjNjA0MA8GA1UdEwEB/wQFMAMBAf8wEQYDVR0OBAoECERqlWdV
+eRFPMA4GA1UdDwEB/wQEAwIBBjANBgkqhkiG9w0BAQUFAAOCAQEAVdRU0VlIXLOThaq/Yy/kgM40
+ozRiPvbY7meIMQQDbwvUB/tOdQ/TLtPAF8fGKOwGDREkDg6lXb+MshOWcdzUzg4NCmgybLlBMRmr
+sQd7TZjTXLDR8KdCoLXEjq/+8T/0709GAHbrAvv5ndJAlseIOrifEXnzgGWovR/TeIGgUUw3tKZd
+JXDRZslo+S4RFGjxVJgIrCaSD96JntT6s3kr0qN51OyLrIdTaEJMUVF0HhsnLuP1Hyl0Te2v9+GS
+mYHovjrHF1D2t8b8m7CKa9aIA5GPBnc6hQLdmNVDeD/GMBWsm2vLV7eJUYs66MmEDNuxUCAKGkq6
+ahq97BvIxYSazQ==
+-----END CERTIFICATE-----
+
+TWCA Root Certification Authority
+=================================
+-----BEGIN CERTIFICATE-----
+MIIDezCCAmOgAwIBAgIBATANBgkqhkiG9w0BAQUFADBfMQswCQYDVQQGEwJUVzESMBAGA1UECgwJ
+VEFJV0FOLUNBMRAwDgYDVQQLDAdSb290IENBMSowKAYDVQQDDCFUV0NBIFJvb3QgQ2VydGlmaWNh
+dGlvbiBBdXRob3JpdHkwHhcNMDgwODI4MDcyNDMzWhcNMzAxMjMxMTU1OTU5WjBfMQswCQYDVQQG
+EwJUVzESMBAGA1UECgwJVEFJV0FOLUNBMRAwDgYDVQQLDAdSb290IENBMSowKAYDVQQDDCFUV0NB
+IFJvb3QgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK
+AoIBAQCwfnK4pAOU5qfeCTiRShFAh6d8WWQUe7UREN3+v9XAu1bihSX0NXIP+FPQQeFEAcK0HMMx
+QhZHhTMidrIKbw/lJVBPhYa+v5guEGcevhEFhgWQxFnQfHgQsIBct+HHK3XLfJ+utdGdIzdjp9xC
+oi2SBBtQwXu4PhvJVgSLL1KbralW6cH/ralYhzC2gfeXRfwZVzsrb+RH9JlF/h3x+JejiB03HFyP
+4HYlmlD4oFT/RJB2I9IyxsOrBr/8+7/zrX2SYgJbKdM1o5OaQ2RgXbL6Mv87BK9NQGr5x+PvI/1r
+y+UPizgN7gr8/g+YnzAx3WxSZfmLgb4i4RxYA7qRG4kHAgMBAAGjQjBAMA4GA1UdDwEB/wQEAwIB
+BjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBRqOFsmjd6LWvJPelSDGRjjCDWmujANBgkqhkiG
+9w0BAQUFAAOCAQEAPNV3PdrfibqHDAhUaiBQkr6wQT25JmSDCi/oQMCXKCeCMErJk/9q56YAf4lC
+mtYR5VPOL8zy2gXE/uJQxDqGfczafhAJO5I1KlOy/usrBdlsXebQ79NqZp4VKIV66IIArB6nCWlW
+QtNoURi+VJq/REG6Sb4gumlc7rh3zc5sH62Dlhh9DrUUOYTxKOkto557HnpyWoOzeW/vtPzQCqVY
+T0bf+215WfKEIlKuD8z7fDvnaspHYcN6+NOSBB+4IIThNlQWx0DeO4pz3N/GCUzf7Nr/1FNCocny
+Yh0igzyXxfkZYiesZSLX0zzG5Y6yU8xJzrww/nsOM5D77dIUkR8Hrw==
+-----END CERTIFICATE-----
+
+Security Communication RootCA2
+==============================
+-----BEGIN CERTIFICATE-----
+MIIDdzCCAl+gAwIBAgIBADANBgkqhkiG9w0BAQsFADBdMQswCQYDVQQGEwJKUDElMCMGA1UEChMc
+U0VDT00gVHJ1c3QgU3lzdGVtcyBDTy4sTFRELjEnMCUGA1UECxMeU2VjdXJpdHkgQ29tbXVuaWNh
+dGlvbiBSb290Q0EyMB4XDTA5MDUyOTA1MDAzOVoXDTI5MDUyOTA1MDAzOVowXTELMAkGA1UEBhMC
+SlAxJTAjBgNVBAoTHFNFQ09NIFRydXN0IFN5c3RlbXMgQ08uLExURC4xJzAlBgNVBAsTHlNlY3Vy
+aXR5IENvbW11bmljYXRpb24gUm9vdENBMjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEB
+ANAVOVKxUrO6xVmCxF1SrjpDZYBLx/KWvNs2l9amZIyoXvDjChz335c9S672XewhtUGrzbl+dp++
++T42NKA7wfYxEUV0kz1XgMX5iZnK5atq1LXaQZAQwdbWQonCv/Q4EpVMVAX3NuRFg3sUZdbcDE3R
+3n4MqzvEFb46VqZab3ZpUql6ucjrappdUtAtCms1FgkQhNBqyjoGADdH5H5XTz+L62e4iKrFvlNV
+spHEfbmwhRkGeC7bYRr6hfVKkaHnFtWOojnflLhwHyg/i/xAXmODPIMqGplrz95Zajv8bxbXH/1K
+EOtOghY6rCcMU/Gt1SSwawNQwS08Ft1ENCcadfsCAwEAAaNCMEAwHQYDVR0OBBYEFAqFqXdlBZh8
+QIH4D5csOPEK7DzPMA4GA1UdDwEB/wQEAwIBBjAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEB
+CwUAA4IBAQBMOqNErLlFsceTfsgLCkLfZOoc7llsCLqJX2rKSpWeeo8HxdpFcoJxDjrSzG+ntKEj
+u/Ykn8sX/oymzsLS28yN/HH8AynBbF0zX2S2ZTuJbxh2ePXcokgfGT+Ok+vx+hfuzU7jBBJV1uXk
+3fs+BXziHV7Gp7yXT2g69ekuCkO2r1dcYmh8t/2jioSgrGK+KwmHNPBqAbubKVY8/gA3zyNs8U6q
+tnRGEmyR7jTV7JqR50S+kDFy1UkC9gLl9B/rfNmWVan/7Ir5mUf/NVoCqgTLiluHcSmRvaS0eg29
+mvVXIwAHIRc/SjnRBUkLp7Y3gaVdjKozXoEofKd9J+sAro03
+-----END CERTIFICATE-----
+
+EC-ACC
+======
+-----BEGIN CERTIFICATE-----
+MIIFVjCCBD6gAwIBAgIQ7is969Qh3hSoYqwE893EATANBgkqhkiG9w0BAQUFADCB8zELMAkGA1UE
+BhMCRVMxOzA5BgNVBAoTMkFnZW5jaWEgQ2F0YWxhbmEgZGUgQ2VydGlmaWNhY2lvIChOSUYgUS0w
+ODAxMTc2LUkpMSgwJgYDVQQLEx9TZXJ2ZWlzIFB1YmxpY3MgZGUgQ2VydGlmaWNhY2lvMTUwMwYD
+VQQLEyxWZWdldSBodHRwczovL3d3dy5jYXRjZXJ0Lm5ldC92ZXJhcnJlbCAoYykwMzE1MDMGA1UE
+CxMsSmVyYXJxdWlhIEVudGl0YXRzIGRlIENlcnRpZmljYWNpbyBDYXRhbGFuZXMxDzANBgNVBAMT
+BkVDLUFDQzAeFw0wMzAxMDcyMzAwMDBaFw0zMTAxMDcyMjU5NTlaMIHzMQswCQYDVQQGEwJFUzE7
+MDkGA1UEChMyQWdlbmNpYSBDYXRhbGFuYSBkZSBDZXJ0aWZpY2FjaW8gKE5JRiBRLTA4MDExNzYt
+SSkxKDAmBgNVBAsTH1NlcnZlaXMgUHVibGljcyBkZSBDZXJ0aWZpY2FjaW8xNTAzBgNVBAsTLFZl
+Z2V1IGh0dHBzOi8vd3d3LmNhdGNlcnQubmV0L3ZlcmFycmVsIChjKTAzMTUwMwYDVQQLEyxKZXJh
+cnF1aWEgRW50aXRhdHMgZGUgQ2VydGlmaWNhY2lvIENhdGFsYW5lczEPMA0GA1UEAxMGRUMtQUND
+MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAsyLHT+KXQpWIR4NA9h0X84NzJB5R85iK
+w5K4/0CQBXCHYMkAqbWUZRkiFRfCQ2xmRJoNBD45b6VLeqpjt4pEndljkYRm4CgPukLjbo73FCeT
+ae6RDqNfDrHrZqJyTxIThmV6PttPB/SnCWDaOkKZx7J/sxaVHMf5NLWUhdWZXqBIoH7nF2W4onW4
+HvPlQn2v7fOKSGRdghST2MDk/7NQcvJ29rNdQlB50JQ+awwAvthrDk4q7D7SzIKiGGUzE3eeml0a
+E9jD2z3Il3rucO2n5nzbcc8tlGLfbdb1OL4/pYUKGbio2Al1QnDE6u/LDsg0qBIimAy4E5S2S+zw
+0JDnJwIDAQABo4HjMIHgMB0GA1UdEQQWMBSBEmVjX2FjY0BjYXRjZXJ0Lm5ldDAPBgNVHRMBAf8E
+BTADAQH/MA4GA1UdDwEB/wQEAwIBBjAdBgNVHQ4EFgQUoMOLRKo3pUW/l4Ba0fF4opvpXY0wfwYD
+VR0gBHgwdjB0BgsrBgEEAfV4AQMBCjBlMCwGCCsGAQUFBwIBFiBodHRwczovL3d3dy5jYXRjZXJ0
+Lm5ldC92ZXJhcnJlbDA1BggrBgEFBQcCAjApGidWZWdldSBodHRwczovL3d3dy5jYXRjZXJ0Lm5l
+dC92ZXJhcnJlbCAwDQYJKoZIhvcNAQEFBQADggEBAKBIW4IB9k1IuDlVNZyAelOZ1Vr/sXE7zDkJ
+lF7W2u++AVtd0x7Y/X1PzaBB4DSTv8vihpw3kpBWHNzrKQXlxJ7HNd+KDM3FIUPpqojlNcAZQmNa
+Al6kSBg6hW/cnbw/nZzBh7h6YQjpdwt/cKt63dmXLGQehb+8dJahw3oS7AwaboMMPOhyRp/7SNVe
+l+axofjk70YllJyJ22k4vuxcDlbHZVHlUIiIv0LVKz3l+bqeLrPK9HOSAgu+TGbrIP65y7WZf+a2
+E/rKS03Z7lNGBjvGTq2TWoF+bCpLagVFjPIhpDGQh2xlnJ2lYJU6Un/10asIbvPuW/mIPX64b24D
+5EI=
+-----END CERTIFICATE-----
diff --git a/source/n/curl/curl-7.27.0_curl-config_syntax_fix.diff b/source/n/curl/curl-7.27.0_curl-config_syntax_fix.diff
new file mode 100644
index 00000000..42509c84
--- /dev/null
+++ b/source/n/curl/curl-7.27.0_curl-config_syntax_fix.diff
@@ -0,0 +1,15 @@
+diff -ru curl-7.27.0.orig/curl-config.in curl-7.27.0/curl-config.in
+--- curl-7.27.0.orig/curl-config.in	2012-05-25 16:56:17.000000000 -0500
++++ curl-7.27.0/curl-config.in	2012-08-17 12:01:44.000000000 -0500
+@@ -135,9 +135,9 @@
+           CPPFLAG_CURL_STATICLIB=""
+         fi
+        	if test "X@includedir@" = "X/usr/include"; then
+-          echo "$(CPPFLAG_CURL_STATICLIB)"
++          echo "${CPPFLAG_CURL_STATICLIB}"
+         else
+-          echo "$(CPPFLAG_CURL_STATICLIB)-I@includedir@"
++          echo "${CPPFLAG_CURL_STATICLIB}-I@includedir@"
+         fi
+        	;;
+ 
diff --git a/source/n/curl/curl.SlackBuild b/source/n/curl/curl.SlackBuild
index 39f632c5..fd67ff4c 100755
--- a/source/n/curl/curl.SlackBuild
+++ b/source/n/curl/curl.SlackBuild
@@ -22,8 +22,8 @@
 
 
 PKGNAM=curl
-VERSION=${VERSION:-$(echo curl-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-$(echo curl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -62,9 +62,11 @@ rm -rf $PKG
 mkdir -p $PKG
 cd $TMP
 rm -rf curl-$VERSION
-tar xvf $CWD/curl-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/curl-$VERSION.tar.?z* || exit 1
 cd curl-$VERSION
 
+zcat $CWD/curl-7.27.0_curl-config_syntax_fix.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -92,6 +94,9 @@ cp -a $CWD/cacert.pem.bz2 $PKG/usr/share/curl
   chmod 644 ca-bundle.crt
 )
 
+# We don't ship the related perl script (yet):
+rm -f $PKG/usr/man/man1/mk-ca-bundle.1
+
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
diff --git a/source/n/cyrus-sasl/cyrus-sasl.SlackBuild b/source/n/cyrus-sasl/cyrus-sasl.SlackBuild
index 27512039..eea8e190 100755
--- a/source/n/cyrus-sasl/cyrus-sasl.SlackBuild
+++ b/source/n/cyrus-sasl/cyrus-sasl.SlackBuild
@@ -22,7 +22,7 @@
 
 PKGNAM=cyrus-sasl
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -58,6 +58,10 @@ cd $TMP
 rm -rf cyrus-sasl-$VERSION
 tar xvf $CWD/cyrus-sasl-$VERSION.tar.?z* || exit 1
 cd cyrus-sasl-$VERSION || exit 1
+
+# Fix compiling:
+zcat $CWD/cyrus-sasl.bad_elif.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . -perm 777 -exec chmod 755 {} \;
 find . -perm 664 -exec chmod 644 {} \;
@@ -69,6 +73,7 @@ CFLAGS="$SLKCFLAGS" \
   --with-configdir=/etc/sasl2 \
   --sysconfdir=/etc \
   --localstatedir=/var \
+  --mandir=/usr/man \
   --disable-static \
   --enable-login \
   --disable-anon \
@@ -81,6 +86,16 @@ CFLAGS="$SLKCFLAGS" \
 # will look for them in /usr/lib64/sasl2" and advised to create a symlink...
 make sasldir=/usr/lib${LIBDIRSUFFIX}/sasl2 || exit 1
 make sasldir=/usr/lib${LIBDIRSUFFIX}/sasl2 install DESTDIR=$PKG || exit 1
+
+# NOTE:  I'd _like_ to get rid of these, but they are already tangled into
+# other .la files, and then those packages would need to be recompiled.  And
+# likely I'd want to get rid of those .la files, which would lead to more
+# fallout, etc, etc.  So we'll put these back and plan a giant .la eradication
+# effort early in a future development cycle.
+#
+# Don't ship .la files.
+#rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la $PKG/usr/lib${LIBDIRSUFFIX}/sasl2/*.la
+
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/n/cyrus-sasl/cyrus-sasl.bad_elif.diff b/source/n/cyrus-sasl/cyrus-sasl.bad_elif.diff
new file mode 100644
index 00000000..a7196b3b
--- /dev/null
+++ b/source/n/cyrus-sasl/cyrus-sasl.bad_elif.diff
@@ -0,0 +1,22 @@
+Index: cyrus-sasl-2.1.23/plugins/digestmd5.c
+===================================================================
+--- cyrus-sasl-2.1.23.orig/plugins/digestmd5.c
++++ cyrus-sasl-2.1.23/plugins/digestmd5.c
+@@ -2715,7 +2715,7 @@ static sasl_server_plug_t digestmd5_serv
+ 	"DIGEST-MD5",			/* mech_name */
+ #ifdef WITH_RC4
+ 	128,				/* max_ssf */
+-#elif WITH_DES
++#elif defined(WITH_DES)
+ 	112,
+ #else 
+ 	1,
+@@ -4034,7 +4034,7 @@ static sasl_client_plug_t digestmd5_clie
+ 	"DIGEST-MD5",
+ #ifdef WITH_RC4				/* mech_name */
+ 	128,				/* max ssf */
+-#elif WITH_DES
++#elif defined(WITH_DES)
+ 	112,
+ #else
+ 	1,
diff --git a/source/n/dhcp/dhcp.SlackBuild b/source/n/dhcp/dhcp.SlackBuild
index c328b3cb..894a323a 100755
--- a/source/n/dhcp/dhcp.SlackBuild
+++ b/source/n/dhcp/dhcp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -77,6 +77,15 @@ find . \
 # Add PATH setting to /sbin/dhclient-script
 zcat $CWD/dhclient-script.PATH.diff.gz | patch -p1 || exit 1
 
+# Fix paths in manual pages
+sed -i \
+    -e "s,ETCDIR,/etc,g" \
+    -e "s,DBDIR,/var/state/dhcp,g" \
+    -e "s,RUNDIR,/var/run,g" \
+    client/*.{5,8} \
+    server/*.{5,8} \
+    doc/*/*.{5,8}
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -153,6 +162,14 @@ cp -a \
 mv $PKG/etc/dhcpd.conf $PKG/etc/dhclient.conf \
   $PKG/usr/doc/dhcp-$VERSION/examples
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/n/dhcpcd/50-ntp.conf.diff b/source/n/dhcpcd/50-ntp.conf.diff
deleted file mode 100644
index 63fd914b..00000000
--- a/source/n/dhcpcd/50-ntp.conf.diff
+++ /dev/null
@@ -1,29 +0,0 @@
---- ./dhcpcd-hooks/50-ntp.conf.orig	2010-11-19 04:17:14.000000000 -0600
-+++ ./dhcpcd-hooks/50-ntp.conf	2010-12-29 16:07:48.000000000 -0600
-@@ -8,6 +8,26 @@
- #   NTP_CONF=/usr/pkg/etc/ntpd.conf
- # to use openntpd from pkgsrc instead of the system provided ntp.
- 
-+# Detect OpenRC, Debian or BSD rc
-+# Distributions may want to just have their command here instead of this
-+if type rc-service >/dev/null 2>&1 && rc-service --exists ntpd; then
-+        ntpd_restart_cmd="rc-service ntpd -- -Ds restart"
-+elif type invoke-rc.d >/dev/null 2>&1; then
-+        if [ -x /etc/init.d/ntp ]; then
-+                ntpd_restart_cmd="invoke-rc.d ntp try-restart"
-+        fi
-+        # Debian as a seperate file for DHCP config to avoid stamping on
-+        # the master.
-+        [ -e /var/lib/ntp ] || mkdir /var/lib/ntp
-+        : ${NTP_DHCP_CONF:=/var/lib/ntp/ntp.conf.dhcp}
-+elif [ -x /etc/rc.d/ntpd ]; then
-+        ntpd_restart_cmd="/etc/rc.d/ntpd status >/dev/null 2>&1 && /etc/rc.d/ntpd restart"
-+elif [ -x /usr/local/etc/rc.d/ntpd ]; then
-+        ntpd_restart_cmd="/usr/local/etc/rc.d/ntpd status >/dev/null 2>&1 && /usr/local/etc/rc.d/ntpd restart"
-+elif [ -x /etc/rc.d/rc.ntpd ]; then
-+        ntpd_restart_cmd="/etc/rc.d/rc.ntpd status >/dev/null 2>&1 && /etc/rc.d/rc.ntpd restart"
-+fi
-+
- : ${ntpd_restart_cmd:=service_condcommand ntpd restart}
- if type invoke-rc.d >/dev/null 2>&1; then
- 	# Debian has a seperate file for DHCP config to avoid stamping on
diff --git a/source/n/dhcpcd/COPYRIGHT b/source/n/dhcpcd/COPYRIGHT
index 07d9e683..a75c8ce1 100644
--- a/source/n/dhcpcd/COPYRIGHT
+++ b/source/n/dhcpcd/COPYRIGHT
@@ -1,6 +1,6 @@
 /*
  * dhcpcd - DHCP client daemon
- * Copyright 2006-2008 Roy Marples <roy@marples.name>
+ * Copyright (c) 2006-2012 Roy Marples <roy@marples.name>
  * All rights reserved
 
  * Redistribution and use in source and binary forms, with or without
diff --git a/source/n/dhcpcd/define-SERVICEstuff-for-Slackware.patch b/source/n/dhcpcd/define-SERVICEstuff-for-Slackware.patch
new file mode 100644
index 00000000..ca0273f3
--- /dev/null
+++ b/source/n/dhcpcd/define-SERVICEstuff-for-Slackware.patch
@@ -0,0 +1,32 @@
+From 293f23ad36f2c84cf67c483d944157834f4417a6 Mon Sep 17 00:00:00 2001
+From: Robby Workman <rworkman@slackware.com>
+Date: Wed, 23 May 2012 21:33:30 -0500
+Subject: [PATCH] configure: Define SERVICE* for Slackware
+
+Slackware uses /etc/rc.d/rc.$service instead of just $service,
+so configure doesn't find those.  This patch overrides the
+defaults for SERVICEEXISTS, SERVICECMD, and SERVICESTATUS.
+---
+ configure |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/configure b/configure
+index b334497..e6554ca 100755
+--- a/configure
++++ b/configure
+@@ -413,6 +413,12 @@ if [ -z "$SERVICECMD" ]; then
+ 		fi
+ 	done
+ fi
++if [ -e /etc/slackware-version ]; then
++	echo "Overriding service status check for Slackware Linux"
++	SERVICEEXISTS="[ -x /etc/rc.d/rc.\$1 ]"
++	SERVICECMD="/etc/rc.d/rc.\$1 \$2"
++	SERVICESTATUS="/etc/rc.d/rc.\$1 status 1>/dev/null 2>&1"
++fi
+ if [ -e /etc/arch-release ]; then
+ 	echo "Overriding service status check for Arch Linux"
+ 	SERVICESTATUS="[ -e /var/run/daemons/\$1 ]"
+-- 
+1.7.10.1
+
diff --git a/source/n/dhcpcd/dhcpcd.SlackBuild b/source/n/dhcpcd/dhcpcd.SlackBuild
index c50048ae..15f14e2f 100755
--- a/source/n/dhcpcd/dhcpcd.SlackBuild
+++ b/source/n/dhcpcd/dhcpcd.SlackBuild
@@ -72,8 +72,7 @@ find . \
 # /etc/rc.d/rc.S, and /var should not be on a network filesystem.  As such,
 # we'll use the FHS layout instead of putting things in /etc/dhcpc 
 
-# Fixup the 50-ntp.conf hook with our init script location
-zcat $CWD/50-ntp.conf.diff.gz | patch -p1 || exit 1
+zcat $CWD/define-SERVICEstuff-for-Slackware.patch.gz | patch -p1 || exit 1
 
 # Yes, /lib/dhcpcd is correct, even on x86_64.
 CFLAGS="$SLKCFLAGS" \
@@ -85,7 +84,6 @@ CFLAGS="$SLKCFLAGS" \
   --dbdir=/var/lib/dhcpcd \
   --libexecdir=/lib/dhcpcd \
   --mandir=/usr/man \
-  --with-hooks="50-ntp.conf 50-yp.conf" \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -97,16 +95,33 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \
 # Let's not clobber the config file
 mv $PKG/etc/dhcpcd.conf $PKG/etc/dhcpcd.conf.new
 
-# Compress manpages
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/dhcpcd-$VERSION
 cp -a README* $PKG/usr/doc/dhcpcd-$VERSION
 zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/dhcpcd-$VERSION/COPYRIGHT
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/n/epic5/epic5.SlackBuild b/source/n/epic5/epic5.SlackBuild
index fb7aa1fd..b3b483af 100755
--- a/source/n/epic5/epic5.SlackBuild
+++ b/source/n/epic5/epic5.SlackBuild
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=1.1.2
+VERSION=1.1.3
 EPICVER=5
 HELPFILE=current
 BUILD=${BUILD:-1}
diff --git a/source/n/fetchmail/fetchmail.SlackBuild b/source/n/fetchmail/fetchmail.SlackBuild
index 16cc3123..e7bca0fd 100755
--- a/source/n/fetchmail/fetchmail.SlackBuild
+++ b/source/n/fetchmail/fetchmail.SlackBuild
@@ -22,7 +22,7 @@
 
 PKGNAM=fetchmail
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/fetchmail/fetchmail.url b/source/n/fetchmail/fetchmail.url
new file mode 100644
index 00000000..7c51f8e8
--- /dev/null
+++ b/source/n/fetchmail/fetchmail.url
@@ -0,0 +1,4 @@
+lftpget http://download.berlios.de/fetchmail/fetchmail-6.3.20.tar.xz
+lftpget http://download.berlios.de/fetchmail/fetchmail-6.3.20.tar.xz.asc
+lftpget http://download.berlios.de/fetchmail/fetchmail-6.3.20.tar.bz2
+lftpget http://download.berlios.de/fetchmail/fetchmail-6.3.20.tar.bz2.asc
diff --git a/source/n/gnupg/gnupg.SlackBuild b/source/n/gnupg/gnupg.SlackBuild
index 2a0bce57..07310697 100755
--- a/source/n/gnupg/gnupg.SlackBuild
+++ b/source/n/gnupg/gnupg.SlackBuild
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=1.4.11
+VERSION=1.4.12
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -54,7 +54,7 @@ mkdir -p $PKG $PKG
 
 cd $TMP
 rm -rf gnupg-$VERSION
-tar xvf $CWD/gnupg-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/gnupg-$VERSION.tar.?z* || exit 1
 cd gnupg-$VERSION
 chown -R root:root .
 find . \
diff --git a/source/n/gnupg2/gnupg2.SlackBuild b/source/n/gnupg2/gnupg2.SlackBuild
index 54cdbb3b..3c48e3d5 100755
--- a/source/n/gnupg2/gnupg2.SlackBuild
+++ b/source/n/gnupg2/gnupg2.SlackBuild
@@ -93,17 +93,27 @@ mkdir -p $PKG/etc/gnupg
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 rm -f $PKG/usr/info/dir
 gzip -9 $PKG/usr/info/*
 
 mkdir -p $PKG/usr/doc/gnupg2-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS TODO VERSION \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS TODO VERSION \
   $PKG/usr/doc/gnupg2-$VERSION
 # Build html docs
 ( cd doc
@@ -131,6 +141,8 @@ mv Agent-GET_005fPASSPHRASE.html Agent-GET_PASSPHRASE.html
 mv option-_002d_002dhomedir.html option-homedir.html
 mv PKCS_002315-Card.html PKCS-15-Card.html
 mv option-_002d_002dexport_002downertrust.html option-export_ownertrust.html
+mv option-_002d_002dlog_002dfile.html option-logfile.html
+mv option-watchgnupg-_002d_002dtcp.html option-watchgnupg-tcp.html
 )
 # Move html doc to the proper location
 mv $PKG/usr/doc/gnupg2-$VERSION/faq.html $PKG/usr/doc/gnupg2-$VERSION/html/
diff --git a/source/n/gnutls/gnutls.SlackBuild b/source/n/gnutls/gnutls.SlackBuild
index 34343b73..c73dc574 100755
--- a/source/n/gnutls/gnutls.SlackBuild
+++ b/source/n/gnutls/gnutls.SlackBuild
@@ -1,6 +1,5 @@
 #!/bin/sh
 
-# Copyright 2007  Robby Workman  (http://rlworkman.net)
 # Copyright 2007, 2008, 2009, 2010  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
@@ -23,7 +22,7 @@
 
 
 PKGNAM=gnutls
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo gnutls-*.tar.?z* | rev | cut -f 4- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -92,6 +91,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --infodir=/usr/info \
   --mandir=/usr/man \
   --enable-static=no \
+  --with-included-libtasn1 \
   --build=$ARCH-slackware-linux \
   --host=$ARCH-slackware-linux
 
@@ -101,10 +101,20 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 ( cd $PKG/usr/info
   rm -f dir
@@ -113,7 +123,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/n/gpa/doinst.sh b/source/n/gpa/doinst.sh
index 1b722006..0fab6897 100644
--- a/source/n/gpa/doinst.sh
+++ b/source/n/gpa/doinst.sh
@@ -8,6 +8,3 @@ if [ -x /usr/bin/update-desktop-database ]; then
   /usr/bin/update-desktop-database &> /dev/null
 fi
 
-if [ -x /usr/bin/gtk-update-icon-cache ]; then
-  /gtk-update-icon-cache -f -t /usr/share/icons/hicolor &> /dev/null
-fi
diff --git a/source/n/gpa/gpa.SlackBuild b/source/n/gpa/gpa.SlackBuild
index 9c6c0e5f..8bf3ac00 100755
--- a/source/n/gpa/gpa.SlackBuild
+++ b/source/n/gpa/gpa.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2006-2007  Robby Workman  (http://rlworkman.net) 
-# Copyright 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -76,6 +76,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
+  --mandir=/usr/man \
   --infodir=/usr/info \
   --build=$ARCH-slackware-linux \
   --host=$ARCH-slackware-linux
@@ -86,11 +87,25 @@ make install DESTDIR=$PKG
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS TODO VERSION \
+  AUTHORS COPYING* NEWS README* THANKS TODO VERSION \
   $PKG/usr/doc/$PKGNAM-$VERSION
-cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
diff --git a/source/n/gpgme/gpgme.SlackBuild b/source/n/gpgme/gpgme.SlackBuild
index 59b9a047..b0ff93d6 100755
--- a/source/n/gpgme/gpgme.SlackBuild
+++ b/source/n/gpgme/gpgme.SlackBuild
@@ -22,7 +22,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=gpgme
-VERSION=1.3.0
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/n/htdig/htdig.SlackBuild b/source/n/htdig/htdig.SlackBuild
index b915314b..ae92cfde 100755
--- a/source/n/htdig/htdig.SlackBuild
+++ b/source/n/htdig/htdig.SlackBuild
@@ -24,7 +24,7 @@
 PKGNAM=htdig
 VERSION=${VERSION:-3.2.0b6}
 NUMJOBS=${NUMJOBS:-" -j7 "}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/htdig/slack-desc b/source/n/htdig/slack-desc
index 7436cf16..fea14f60 100644
--- a/source/n/htdig/slack-desc
+++ b/source/n/htdig/slack-desc
@@ -9,7 +9,7 @@
 htdig: htdig (web indexing and searching system)
 htdig:
 htdig: The ht://Dig system is a complete web indexing and searching system
-htdig: for a small domain or intranet.  This system is not indended to
+htdig: for a small domain or intranet.  This system is not intended to
 htdig: replace the need for outside Internet search engines such as Google,
 htdig: but rather to cover the search needs for a single company, campus, or
 htdig: even a particular sub section of a web site.
diff --git a/source/n/httpd/README b/source/n/httpd/README
deleted file mode 100644
index 796bb29a..00000000
--- a/source/n/httpd/README
+++ /dev/null
@@ -1,34 +0,0 @@
-WARNING
-
-This script builds a package that conflicts with apache1.  Before
-attempting to install this package, you should uninstall any of
-these packages that you find on your system:
-
-apache
-mod_ssl
-php
-
-Really though, the only points of overlap are in /usr/sbin, so if you
-leave your old packages in place apache2 will still work, but the
-apache1 httpd will have been overwritten (along with other files)
-
-Apache is the most popular web server in the known universe; over half
-the servers on the Internet are running Apache or one of its variants.
-
-By default, we build apache2 with the traditional "apache prefork" multi
-processing module (MPM).  This is somewhat safer for the use of mod_php,
-but can still carry some security risks (all your php scripts run as the
-user configured to run apache2).
-
-For enhanced multi-threaded performance, use "apache worker", but using
-mod_php with "worker" is considered dangerous.  PHP Core is multi-thread
-safe, but many PHP extensions are *NOT*.  To build apache2 with the
-worker MPM, change the option to:  --with-mpm=worker
-
-Please note that this script does not build apache2 with SuEXEC support.
-The Apache group feels SuEXEC should not be part of a default install.
-If you need this functionality, please read the following documentation
-and make the necessary changes to the ./configure options in the script.
-
-  http://httpd.apache.org/docs/2.0/suexec.html
-
diff --git a/source/n/httpd/config.layout.diff b/source/n/httpd/config.layout.diff
deleted file mode 100644
index c302515f..00000000
--- a/source/n/httpd/config.layout.diff
+++ /dev/null
@@ -1,30 +0,0 @@
---- ./config.layout.orig	2004-11-21 12:50:36.000000000 -0600
-+++ ./config.layout	2007-05-23 13:35:20.000000000 -0500
-@@ -322,3 +322,27 @@
-     installbuilddir: ${prefix}/etc/apache2/build
-     errordir:      ${datadir}/error
- </Layout>
-+
-+# FHS layout
-+<Layout Slackware-FHS>
-+    prefix:          /usr
-+    exec_prefix:     ${prefix}
-+    bindir:          ${prefix}/bin
-+    sbindir:         ${prefix}/sbin
-+    libdir:          ${prefix}/lib/httpd
-+    libexecdir:      ${prefix}/lib/httpd/modules
-+    installbuilddir: ${prefix}/lib/httpd/build
-+    mandir:          ${prefix}/man
-+    sysconfdir:      /etc/httpd
-+    datadir:         /srv/httpd
-+    iconsdir:        ${datadir}/icons
-+    htdocsdir:       ${datadir}/htdocs
-+    manualdir:       ${htdocsdir}/manual
-+    cgidir:          ${datadir}/cgi-bin
-+    errordir:        ${datadir}/error
-+    includedir:      ${prefix}/include/httpd
-+    localstatedir:   /var
-+    runtimedir:      ${localstatedir}/run/httpd
-+    logfiledir:      ${localstatedir}/log/httpd
-+    proxycachedir:   ${localstatedir}/cache/httpd
-+</Layout>
diff --git a/source/n/httpd/doinst.sh b/source/n/httpd/doinst.sh
index 49e5400d..da256515 100644
--- a/source/n/httpd/doinst.sh
+++ b/source/n/httpd/doinst.sh
@@ -1,4 +1,29 @@
 #!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  # Don't use config() -- we always want to install this, changed or unchanged.
+  #config ${NEW}
+}
+
 if [ ! -e var/log/httpd ]; then
   mkdir -p var/log/httpd
   chmod 755 var/log/httpd
@@ -26,27 +51,19 @@ if [ -r var/www/htdocs/index.html ]; then
   fi
 fi
 
-config() {
-  NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-# Keep same perms on rc.httpd.new:
-if [ -e etc/rc.d/rc.httpd ]; then
-  cp -a etc/rc.d/rc.httpd etc/rc.d/rc.httpd.new.incoming
-  cat etc/rc.d/rc.httpd.new > etc/rc.d/rc.httpd.new.incoming
-  mv etc/rc.d/rc.httpd.new.incoming etc/rc.d/rc.httpd.new
-fi
-config etc/rc.d/rc.httpd.new
+# Keep same perms when installing rc.httpd.new:
+preserve_perms etc/rc.d/rc.httpd.new
+# Always install the new rc.httpd:
+mv etc/rc.d/rc.httpd.new etc/rc.d/rc.httpd
+
+# Handle config files.  Unless this is a fresh installation, the
+# admin will have to move the .new files into place to complete
+# the package installation, as we don't want to clobber files that
+# may contain local customizations.
 config etc/httpd/httpd.conf.new
 config etc/logrotate.d/httpd.new
 for conf_file in etc/httpd/extra/*.new; do
   config $conf_file
 done
 config var/www/htdocs/index.html.new
+
diff --git a/source/n/httpd/httpd.SlackBuild b/source/n/httpd/httpd.SlackBuild
index a97ccf36..1d043f74 100755
--- a/source/n/httpd/httpd.SlackBuild
+++ b/source/n/httpd/httpd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -26,7 +26,7 @@
 
 PKGNAM=httpd
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -73,29 +73,49 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-# "prefork" is the default, safe, mpm type.  If you *are not* using PHP, and you
-# like to live on the bleeding edge, you may wish to change the --with-mpm option
-# to "worker", which is the new way of doing things, but is multithreaded and
-# many scripts (especially PHP ones) are not multithread safe.
+# A brief note about mpms:
 #
-# I'd leave this option the way is it on any production box that's keeping up
-# with HTTP requests.  No reason to chance it, IMHO.
+# "prefork" is the legacy forked mpm, used with mod_php. Starting with httpd 
+# 2.4.0, new threaded mpms are available, and previously experimental mpms are
+# now stable
+#
+# Non-threaded mpms are no longer required, since php applications can now be
+# deployed with the help of mod_fcgid, essentially a set of fixed dedicated cgi
+# processes spawned for the whole purpose of executing dynamic applications
+#
+# Threaded mpms, by their very nature, are far more scalable than the
+# traditional preforking solution. They consume less memory for the same
+# workload, when serving the same amount of clients. httpd 2.4 ships with two
+# options, "event" and "worker", where the former is the default mpm used if
+# none is specified at the ./configure line
+#
+# Lastly, the "prefork" mpm can be used with mod_php as of version 5.4.0,
+# which yields a much improved stability, even with most mod_php extensions
+# loaded.
+#
+# The running mpm can be changed by simply loading the module. Here is a sample:
+# LoadModule mpm_event_module lib(64)/httpd/modules/mod_mpm_event.so
+#
+# When upgrading from 2.2, please make sure to stop the deamon first, or your
+# new instance may segfault.
 
-zcat $CWD/config.layout.diff.gz | sed -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" | patch --verbose -p1 || exit 1
+# Fix config.layout to use lib${LIBDIRSUFFIX}:
+sed -i -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" config.layout
 
-# Patch to fix aliasing issue exposed by gcc-4.5.1:
-zcat $CWD/httpd.brigade_move.__noinline__.gcc451.diff.gz | patch --verbose -p1 || exit 1
+# If /var/run becomes a tmpfs or a link to /run, subdirectories could be a problem.
+# Just use /var/run rather than /var/run/httpd.
+sed -i -e "s#/run/httpd#/run#" config.layout
 
 # Configure:
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --enable-layout=Slackware-FHS \
-  --with-mpm=prefork \
   --with-apr=/usr \
   --with-apr-util=/usr \
   --enable-mods-shared=all \
   --enable-so \
+  --enable-mpms-shared=all \
   --enable-pie \
   --enable-cgi \
   --with-pcre \
@@ -105,12 +125,10 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-proxy \
   --enable-proxy-http \
   --enable-proxy-ftp \
-  --enable-proxy-balancer \
   --enable-cache \
   --enable-mem-cache \
   --enable-file-cache \
   --enable-disk-cache \
-  --disable-speling \
   --enable-dav \
   --enable-ldap \
   --enable-authnz-ldap \
@@ -126,8 +144,12 @@ rmdir $PKG/usr/bin
 
 # Tweak default apache configuration
 ( cd $PKG
-  zcat $CWD/httpd.nossldefault.diff.gz | sed -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" | patch -p1 --verbose || exit 1
   zcat $CWD/httpd.runasapache.diff.gz | patch -p1 --verbose || exit 1
+  # mod_proxy_balancer should be commented out, as otherwise httpd
+  # will not start without additional configuration:
+  sed -i "s/^LoadModule proxy_balancer_module/#LoadModule proxy_balancer_module/g" $PKG/etc/httpd/httpd.conf
+  # This module issues a warning unless some non-default modules are loaded:
+  sed -i "s/^LoadModule lbmethod_heartbeat_module/#LoadModule lbmethod_heartbeat_module/g" $PKG/etc/httpd/httpd.conf
   rm -f $PKG/etc/httpd/httpd.conf~ $PKG/etc/httpd/httpd.conf.orig
 ) || exit 1
 # Change config files to .new:
@@ -144,7 +166,7 @@ cat << EOF >> $PKG/etc/httpd/httpd.conf.new
 #
 #Include /etc/httpd/mod_php.conf
 
-# Uncomment the following lines to enable svn support:
+# Uncomment the following lines (and mod_dav above) to enable svn support:
 #
 #LoadModule dav_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_dav_svn.so
 #LoadModule authz_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_authz_svn.so
diff --git a/source/n/httpd/httpd.brigade_move.__noinline__.gcc451.diff b/source/n/httpd/httpd.brigade_move.__noinline__.gcc451.diff
deleted file mode 100644
index e8915ae4..00000000
--- a/source/n/httpd/httpd.brigade_move.__noinline__.gcc451.diff
+++ /dev/null
@@ -1,10 +0,0 @@
---- ./server/core_filters.c.orig	2010-02-26 03:32:15.000000000 -0600
-+++ ./server/core_filters.c	2011-02-12 13:23:22.000000000 -0600
-@@ -83,6 +83,7 @@
-  *
-  * XXXX: Should this function be added to APR-Util?
-  */
-+__attribute__((__noinline__))
- static void brigade_move(apr_bucket_brigade *b, apr_bucket_brigade *a,
-                          apr_bucket *e)
- {
diff --git a/source/n/httpd/httpd.nossldefault.diff b/source/n/httpd/httpd.nossldefault.diff
deleted file mode 100644
index bcf891f8..00000000
--- a/source/n/httpd/httpd.nossldefault.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./etc/httpd/httpd.conf.orig	2007-05-17 23:40:15.000000000 -0500
-+++ ./etc/httpd/httpd.conf	2007-05-18 15:55:38.000000000 -0500
-@@ -88,7 +88,7 @@
- LoadModule proxy_http_module lib/httpd/modules/mod_proxy_http.so
- LoadModule proxy_ajp_module lib/httpd/modules/mod_proxy_ajp.so
- LoadModule proxy_balancer_module lib/httpd/modules/mod_proxy_balancer.so
--LoadModule ssl_module lib/httpd/modules/mod_ssl.so
-+#LoadModule ssl_module lib/httpd/modules/mod_ssl.so
- LoadModule mime_module lib/httpd/modules/mod_mime.so
- LoadModule dav_module lib/httpd/modules/mod_dav.so
- LoadModule status_module lib/httpd/modules/mod_status.so
diff --git a/source/n/httpd/httpd.url b/source/n/httpd/httpd.url
index 8b8a1768..3fabb916 100644
--- a/source/n/httpd/httpd.url
+++ b/source/n/httpd/httpd.url
@@ -1,2 +1,2 @@
-http://www.apache.org/dist/httpd/httpd-2.2.17.tar.bz2
-http://www.apache.org/dist/httpd/httpd-2.2.17.tar.bz2.asc
+http://www.apache.org/dist/httpd/httpd-2.4.3.tar.bz2
+http://www.apache.org/dist/httpd/httpd-2.4.3.tar.bz2.asc
diff --git a/source/n/httpd/rc.httpd b/source/n/httpd/rc.httpd
index 064f6ea4..81189098 100644
--- a/source/n/httpd/rc.httpd
+++ b/source/n/httpd/rc.httpd
@@ -17,7 +17,16 @@ case "$1" in
   'stop')
     /usr/sbin/apachectl -k stop
     killall httpd
-    rm -f /var/run/httpd/*.pid
+    # Remove both old and new .pid locations:
+    rm -f /var/run/httpd.pid /var/run/httpd/httpd.pid
+  ;;
+  'force-restart')
+    # Because sometimes restarting through apachectl just doesn't do the trick...
+    /usr/sbin/apachectl -k stop
+    killall httpd
+    # Remove both old and new .pid locations:
+    rm -f /var/run/httpd.pid /var/run/httpd/httpd.pid
+    /usr/sbin/apachectl -k start
   ;;
   'restart')
     /usr/sbin/apachectl -k restart
diff --git a/source/n/iftop/iftop.SlackBuild b/source/n/iftop/iftop.SlackBuild
new file mode 100755
index 00000000..0361a475
--- /dev/null
+++ b/source/n/iftop/iftop.SlackBuild
@@ -0,0 +1,126 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=iftop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+cd ${PKGNAM}-$VERSION
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* NEWS README* TODO \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/iftop/slack-desc b/source/n/iftop/slack-desc
new file mode 100644
index 00000000..f7bc5c48
--- /dev/null
+++ b/source/n/iftop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+iftop: iftop (Display bandwidth usage on an interface)
+iftop:
+iftop: iftop does for network usage what top(1) does for CPU usage.
+iftop: It listens to network traffic on a named interface and displays a
+iftop: table of current bandwidth usage by pairs of hosts.  Handy for
+iftop: answering the question "why is our link so slow?".
+iftop:
+iftop:
+iftop:
+iftop: Homepage:  http://www.ex-parrot.com/~pdw/iftop/
+iftop:
diff --git a/source/n/iproute2/doinst.sh b/source/n/iproute2/doinst.sh
index 01b82a28..a283373d 100644
--- a/source/n/iproute2/doinst.sh
+++ b/source/n/iproute2/doinst.sh
@@ -10,6 +10,7 @@ config() {
   # Otherwise, we leave the .new copy for the admin to consider...
 }
 config etc/iproute2/ematch_map.new
+config etc/iproute2/group.new
 config etc/iproute2/rt_dsfield.new
 config etc/iproute2/rt_protos.new
 config etc/iproute2/rt_realms.new
diff --git a/source/n/iproute2/fixup-for-x86_64.diff b/source/n/iproute2/fixup-for-x86_64.diff
new file mode 100644
index 00000000..3f5e1a23
--- /dev/null
+++ b/source/n/iproute2/fixup-for-x86_64.diff
@@ -0,0 +1,12 @@
+diff -Nur iproute2-3.4.0.orig/configure iproute2-3.4.0/configure
+--- iproute2-3.4.0.orig/configure	2012-05-21 16:12:19.000000000 -0500
++++ iproute2-3.4.0/configure	2012-05-23 19:15:58.548350916 -0500
+@@ -149,7 +149,7 @@
+ check_ipt_lib_dir()
+ {
+ 	IPT_LIB_DIR=""
+-	for dir in /lib /usr/lib /usr/local/lib
++	for dir in /lib64 /usr/lib64 /usr/local/lib64
+ 	do
+ 		for file in $dir/{xtables,iptables}/lib*t_*so ; do
+ 			if [ -f $file ]; then
diff --git a/source/n/iproute2/iproute2.SlackBuild b/source/n/iproute2/iproute2.SlackBuild
index 929aa7b9..9854a2d8 100755
--- a/source/n/iproute2/iproute2.SlackBuild
+++ b/source/n/iproute2/iproute2.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,10 +20,8 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-# Build this against 2.6.x kernel source and headers...
-
-VERSION=2.6.37
-BUILD=${BUILD:-1}
+VERSION=3.4.0
+BUILD=${BUILD:-2}
 
 #NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -59,7 +57,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf iproute2-$VERSION
-tar xvf $CWD/iproute2-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/iproute2-$VERSION.tar.xz || exit 1
 cd iproute2-$VERSION
 
 chown -R root:root .
@@ -69,24 +67,31 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Fix up path to bdb and iptables libs
-zcat $CWD/iproute2.fixup_dbpath_and_iptablespath.diff.gz | sed \
-  -e "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX},g" \
-  -e "s,@VERSION@,$VERSION,g" | patch -p1 || exit 1
-
-# Use our custom SLKCFLAGS
-sed -i "s/-O2 /-O2 -fPIC /" Makefile
+# Fix up path iptables libs
+zcat $CWD/fixup-for-x86_64.diff.gz | patch -p1 || exit 1
 
 ./configure  # This is okay, really :-)
-make $NUMJOBS || exit 1
+
+make \
+  CCOPTS="$SLKCFLAGS" \
+  LIBDIR=/usr/lib${LIBDIRSUFFIX} \
+  CONFDIR=/etc/iproute2 \
+  DOCDIR=/usr/doc/iproute2-$VERSION \
+  MANDIR=/usr/man \
+  DBM_INCLUDE=/usr/include/db44 \
+  $NUMJOBS || exit 1
+
+make install \
+  LIBDIR=/usr/lib${LIBDIRSUFFIX} \
+  CONFDIR=/etc/iproute2 \
+  DOCDIR=/usr/doc/iproute2-$VERSION \
+  MANDIR=/usr/man \
+  DBM_INCLUDE=/usr/include/db44 \
+  DESTDIR=$PKG || exit 1
 
 mkdir -p $PKG/usr
 make install LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG/usr/ || exit 1
 
-# I can't seem to make this go to the right place on x86_64, but all the
-# relevant stuff looks correct :/
-[ "$ARCH" = "x86_64" ] && mv $PKG/usr/lib $PKG/usr/lib${LIBDIRSUFFIX} 
-
 # This stuff has always been installed under /sbin rather than
 # /usr/sbin, as the latter could possibly be network-mounted, and
 # these utilities may be needed to set up that network, so move
@@ -100,7 +105,6 @@ mv $PKG/usr/sbin/* $PKG/sbin
   done
 )
 
-mv $PKG/usr/etc $PKG
 # Don't clobber existing config files
 for file in $PKG/etc/iproute2/* ; do
   mv $file ${file}.new
@@ -109,8 +113,7 @@ done
 # Remove junk:
 [ -d $PKG/usr/usr ] && rm -r $PKG/usr/usr
 [ -d $PKG/usr/var ] && rm -r $PKG/usr/var
-
-mkdir -p $PKG/var/lib/arpd
+[ -d $PKG/usr/etc ] && rm -r $PKG/usr/etc
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/n/iproute2/iproute2.fixup_dbpath_and_iptablespath.diff b/source/n/iproute2/iproute2.fixup_dbpath_and_iptablespath.diff
deleted file mode 100644
index fe5b1abc..00000000
--- a/source/n/iproute2/iproute2.fixup_dbpath_and_iptablespath.diff
+++ /dev/null
@@ -1,34 +0,0 @@
-diff -Nur iproute2-2.6.33.orig//Makefile iproute2-2.6.33/Makefile
---- iproute2-2.6.33.orig//Makefile	2010-02-24 21:56:50.000000000 -0600
-+++ iproute2-2.6.33/Makefile	2010-02-24 23:00:52.614825494 -0600
-@@ -1,14 +1,14 @@
- DESTDIR=/usr/
- ROOTDIR=$(DESTDIR)
--LIBDIR=/usr/lib/
-+LIBDIR=@LIBDIR@
- SBINDIR=/sbin
- CONFDIR=/etc/iproute2
--DOCDIR=/share/doc/iproute2
--MANDIR=/share/man
-+DOCDIR=/doc/iproute2-@VERSION@
-+MANDIR=/man
- ARPDDIR=/var/lib/arpd
- 
- # Path to db_185.h include
--DBM_INCLUDE:=$(ROOTDIR)/usr/include
-+DBM_INCLUDE:=$(ROOTDIR)/usr/include/db44
- 
- SHARED_LIBS = y
- 
-diff -Nur iproute2-2.6.33.orig//include/iptables.h iproute2-2.6.33/include/iptables.h
---- iproute2-2.6.33.orig//include/iptables.h	2010-02-24 21:56:50.000000000 -0600
-+++ iproute2-2.6.33/include/iptables.h	2010-02-24 23:02:21.891841749 -0600
-@@ -5,7 +5,7 @@
- #include "libiptc/libiptc.h"
- 
- #ifndef IPT_LIB_DIR
--#define IPT_LIB_DIR "/usr/local/lib/iptables"
-+#define IPT_LIB_DIR "@LIBDIR@"
- #endif
- 
- #ifndef IPPROTO_SCTP
diff --git a/source/n/iptables/iptables.SlackBuild b/source/n/iptables/iptables.SlackBuild
index 0d191b3c..26f3d922 100755
--- a/source/n/iptables/iptables.SlackBuild
+++ b/source/n/iptables/iptables.SlackBuild
@@ -83,14 +83,34 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null
 
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/iptables-$VERSION
 cp -a \
   COPYING* INCOMPATIBILITIES INSTALL \
   $PKG/usr/doc/iptables-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/n/iputils/iputils.SlackBuild b/source/n/iputils/iputils.SlackBuild
index bc711fb0..2e087afc 100755
--- a/source/n/iputils/iputils.SlackBuild
+++ b/source/n/iputils/iputils.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=s20101006
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/irssi/irssi.SlackBuild b/source/n/irssi/irssi.SlackBuild
index eca06ab3..454f2583 100755
--- a/source/n/irssi/irssi.SlackBuild
+++ b/source/n/irssi/irssi.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,7 +27,7 @@ PKG=$TMP/package-irssi
 
 VERSION=0.8.15
 DIRCD=0.8.15
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/iw/iw.SlackBuild b/source/n/iw/iw.SlackBuild
index bd78d0e0..10211173 100755
--- a/source/n/iw/iw.SlackBuild
+++ b/source/n/iw/iw.SlackBuild
@@ -36,6 +36,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
@@ -63,11 +65,14 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-make CFLAGS="$SLKCFLAGS"
+make clean
+# Providing external CFLAGS breaks building if libnl > 1 is installed
+#make CFLAGS="$SLKCFLAGS" || exit 1
+make $NUMJOBS || make || exit 1
 make install \
   BINDIR=/usr/sbin \
   MANDIR=/usr/man \
-  DESTDIR=$PKG
+  DESTDIR=$PKG || exit 1
 
 ( cd $PKG
   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
@@ -81,6 +86,14 @@ cp -a \
   COPYING* README* \
     $PKG/usr/doc/$PKGNAM-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/n/iw/iw.info b/source/n/iw/iw.info
index 11c14746..325189b8 100644
--- a/source/n/iw/iw.info
+++ b/source/n/iw/iw.info
@@ -1,2 +1,2 @@
 HOMEPAGE="http://wireless.kernel.org/en/users/Documentation/iw"
-DOWNLOAD="http://wireless.kernel.org/download/iw/iw-0.9.11.tar.bz2"
+DOWNLOAD="http://wireless.kernel.org/download/iw/iw-3.0.tar.bz2"
diff --git a/source/n/iwlwifi-100-ucode/iwlwifi-100-ucode.SlackBuild b/source/n/iwlwifi-100-ucode/iwlwifi-100-ucode.SlackBuild
deleted file mode 100755
index 6ef720e5..00000000
--- a/source/n/iwlwifi-100-ucode/iwlwifi-100-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-100-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-100-ucode/slack-desc b/source/n/iwlwifi-100-ucode/slack-desc
deleted file mode 100644
index 3c7b36c0..00000000
--- a/source/n/iwlwifi-100-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-iwlwifi-100-ucode: iwlwifi-1000-ucode (Intel Centrino N 100 wireless microcode)
-iwlwifi-100-ucode:
-iwlwifi-100-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-100-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate.
-iwlwifi-100-ucode:
-iwlwifi-100-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-100-ucode:   http://intellinuxwireless.org/
-iwlwifi-100-ucode:
-iwlwifi-100-ucode:
-iwlwifi-100-ucode:
-iwlwifi-100-ucode:
diff --git a/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild b/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild
deleted file mode 100755
index 80db4c10..00000000
--- a/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-1000-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-1000-ucode/slack-desc b/source/n/iwlwifi-1000-ucode/slack-desc
deleted file mode 100644
index e0c939e8..00000000
--- a/source/n/iwlwifi-1000-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-1000-ucode: iwlwifi-1000-ucode (Intel 1000 wireless microcode)
-iwlwifi-1000-ucode:
-iwlwifi-1000-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-1000-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate.
-iwlwifi-1000-ucode:
-iwlwifi-1000-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-1000-ucode:   http://intellinuxwireless.org/
-iwlwifi-1000-ucode:
-iwlwifi-1000-ucode:
-iwlwifi-1000-ucode:
-iwlwifi-1000-ucode:
diff --git a/source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode.SlackBuild b/source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode.SlackBuild
deleted file mode 100755
index 87da1472..00000000
--- a/source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-3945-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-3945-ucode/slack-desc b/source/n/iwlwifi-3945-ucode/slack-desc
deleted file mode 100644
index 1b1b061b..00000000
--- a/source/n/iwlwifi-3945-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-3945-ucode: iwlwifi-3945-ucode (Intel 3945 wireless microcode)
-iwlwifi-3945-ucode:
-iwlwifi-3945-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-3945-ucode: PRO/Wireless 3945ABG/BG Network Connection Adapter driver for Linux
-iwlwifi-3945-ucode: (iwlwifi-3945) to operate.
-iwlwifi-3945-ucode:
-iwlwifi-3945-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-3945-ucode:   http://intellinuxwireless.org/
-iwlwifi-3945-ucode:
-iwlwifi-3945-ucode:
-iwlwifi-3945-ucode:
diff --git a/source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode.SlackBuild b/source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode.SlackBuild
deleted file mode 100755
index 1f72acf2..00000000
--- a/source/n/iwlwifi-4965-ucode/iwlwifi-4965-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-4965-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-4965-ucode/slack-desc b/source/n/iwlwifi-4965-ucode/slack-desc
deleted file mode 100644
index 6b84a7d6..00000000
--- a/source/n/iwlwifi-4965-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-4965-ucode: iwlwifi-4965-ucode (Intel 4965 wireless microcode)
-iwlwifi-4965-ucode:
-iwlwifi-4965-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-4965-ucode: PRO/Wireless 4965ABG/BG Network Connection Adapter driver for Linux
-iwlwifi-4965-ucode: (iwlwifi-4965) to operate.
-iwlwifi-4965-ucode:
-iwlwifi-4965-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-4965-ucode:   http://intellinuxwireless.org/
-iwlwifi-4965-ucode:
-iwlwifi-4965-ucode:
-iwlwifi-4965-ucode:
diff --git a/source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode.SlackBuild b/source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode.SlackBuild
deleted file mode 100755
index fcd0a571..00000000
--- a/source/n/iwlwifi-5000-ucode/iwlwifi-5000-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-5000-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-5000-ucode/slack-desc b/source/n/iwlwifi-5000-ucode/slack-desc
deleted file mode 100644
index 2b817fcc..00000000
--- a/source/n/iwlwifi-5000-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-5000-ucode: iwlwifi-5000-ucode (Intel 5000 wireless microcode)
-iwlwifi-5000-ucode:
-iwlwifi-5000-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-5000-ucode: PRO/Wireless 5000ABG/BG Network Connection Adapter driver for Linux
-iwlwifi-5000-ucode: (iwlagn) to operate.
-iwlwifi-5000-ucode:
-iwlwifi-5000-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-5000-ucode:   http://intellinuxwireless.org/
-iwlwifi-5000-ucode:
-iwlwifi-5000-ucode:
-iwlwifi-5000-ucode:
diff --git a/source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode.SlackBuild b/source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode.SlackBuild
deleted file mode 100755
index 5c74817a..00000000
--- a/source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-5150-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-5150-ucode/slack-desc b/source/n/iwlwifi-5150-ucode/slack-desc
deleted file mode 100644
index 31c2222e..00000000
--- a/source/n/iwlwifi-5150-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-5150-ucode: iwlwifi-5150-ucode (Intel 5150 wireless microcode)
-iwlwifi-5150-ucode:
-iwlwifi-5150-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-5150-ucode: PRO/Wireless 5150AGN Network Connection Adapter driver for Linux
-iwlwifi-5150-ucode: (iwlagn) to operate.
-iwlwifi-5150-ucode:
-iwlwifi-5150-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-5150-ucode:   http://intellinuxwireless.org/
-iwlwifi-5150-ucode:
-iwlwifi-5150-ucode:
-iwlwifi-5150-ucode:
diff --git a/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild b/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild
deleted file mode 100755
index 251f7e61..00000000
--- a/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-6000-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/${PKGNAM}-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  rm -rf ${PKGNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd ${PKGNAM}-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-6000-ucode/slack-desc b/source/n/iwlwifi-6000-ucode/slack-desc
deleted file mode 100644
index 50d56c38..00000000
--- a/source/n/iwlwifi-6000-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-6000-ucode: iwlwifi-6000-ucode (Intel 6000 wireless microcode)
-iwlwifi-6000-ucode:
-iwlwifi-6000-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-6000-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate.
-iwlwifi-6000-ucode:
-iwlwifi-6000-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-6000-ucode:   http://intellinuxwireless.org/
-iwlwifi-6000-ucode:
-iwlwifi-6000-ucode:
-iwlwifi-6000-ucode:
-iwlwifi-6000-ucode:
diff --git a/source/n/iwlwifi-6xxx-ucode/iwlwifi-6xxx-ucode.SlackBuild b/source/n/iwlwifi-6xxx-ucode/iwlwifi-6xxx-ucode.SlackBuild
deleted file mode 100755
index 0002f09d..00000000
--- a/source/n/iwlwifi-6xxx-ucode/iwlwifi-6xxx-ucode.SlackBuild
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=iwlwifi-6xxx-ucode
-#VERSION will be determined automatically, and the package will use the last version found.
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-for file in $CWD/iwlwifi-6*-*.tar.?z* ; do
-  VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - )
-  SRCNAM=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 1-3 -d -)
-  rm -rf ${SRCNAM}-${VERSION}
-  tar xvf $file || exit 1
-  cd $SRCNAM-$VERSION || exit 1
-  # Make sure ownerships and permissions are sane:
-  chown -R root:root .
-  chmod 644 *
-  # install:
-  mkdir -p $PKG/lib/firmware
-  cp -a iwlwifi-*.ucode $PKG/lib/firmware
-  # Add a documentation directory:
-  mkdir -p $PKG/usr/doc/${SRCNAM}-${VERSION}
-  cp -a LICENSE* README* $PKG/usr/doc/${SRCNAM}-${VERSION}
-done
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/iwlwifi-6xxx-ucode/slack-desc b/source/n/iwlwifi-6xxx-ucode/slack-desc
deleted file mode 100644
index 0043d6cd..00000000
--- a/source/n/iwlwifi-6xxx-ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-iwlwifi-6xxx-ucode: iwlwifi-6xxx-ucode (Intel 6xxx wireless microcode)
-iwlwifi-6xxx-ucode:
-iwlwifi-6xxx-ucode: The microcode provided in this package is required for the Intel
-iwlwifi-6xxx-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate.
-iwlwifi-6xxx-ucode:
-iwlwifi-6xxx-ucode: Visit Intel's Linux wireless website at this address:
-iwlwifi-6xxx-ucode:   http://intellinuxwireless.org/
-iwlwifi-6xxx-ucode:
-iwlwifi-6xxx-ucode:
-iwlwifi-6xxx-ucode:
-iwlwifi-6xxx-ucode:
diff --git a/source/n/lftp/lftp.SlackBuild b/source/n/lftp/lftp.SlackBuild
index 9e75153a..ba7229c4 100755
--- a/source/n/lftp/lftp.SlackBuild
+++ b/source/n/lftp/lftp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-$(echo lftp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo lftp-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -58,7 +58,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf lftp-$VERSION
-tar xvf $CWD/lftp-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/lftp-$VERSION.tar.xz || exit 1
 cd lftp-$VERSION
 
 chown -R root:root .
diff --git a/source/n/libgcrypt/libgcrypt.SlackBuild b/source/n/libgcrypt/libgcrypt.SlackBuild
index d0629eee..42b1b419 100755
--- a/source/n/libgcrypt/libgcrypt.SlackBuild
+++ b/source/n/libgcrypt/libgcrypt.SlackBuild
@@ -77,7 +77,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --infodir=/usr/info \
   --docdir=/usr/doc/libgcrypt-$VERSION \
   --enable-shared=yes \
-  --enable-static=yes \
+  --enable-static=no \
   --program-prefix="" \
   --program-suffix="" \
   --build=$ARCH-slackware-linux \
diff --git a/source/n/libgpg-error/libgpg-error.SlackBuild b/source/n/libgpg-error/libgpg-error.SlackBuild
index 58f6ceca..73397d93 100755
--- a/source/n/libgpg-error/libgpg-error.SlackBuild
+++ b/source/n/libgpg-error/libgpg-error.SlackBuild
@@ -99,7 +99,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS VERSION \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS VERSION \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
diff --git a/source/n/links/links.SlackBuild b/source/n/links/links.SlackBuild
index c8839ebd..241cc662 100755
--- a/source/n/links/links.SlackBuild
+++ b/source/n/links/links.SlackBuild
@@ -20,7 +20,7 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=2.3pre1
+VERSION=2.7
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
diff --git a/source/n/lynx/lynx.SlackBuild b/source/n/lynx/lynx.SlackBuild
index 5a298547..9c5062c3 100755
--- a/source/n/lynx/lynx.SlackBuild
+++ b/source/n/lynx/lynx.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 SRCVER=2.8.7
 PKGVER=2.8.7
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -92,6 +92,7 @@ CFLAGS="$SLKCFLAGS" \
   --enable-read-eta \
   --enable-scrollbar \
   --with-ssl \
+  --enable-ipv6 \
   --enable-color-style \
   --enable-prettysrc \
   --enable-source-cache \
diff --git a/source/n/mailx/mailx.SlackBuild b/source/n/mailx/mailx.SlackBuild
index 9d552366..30c20ea1 100755
--- a/source/n/mailx/mailx.SlackBuild
+++ b/source/n/mailx/mailx.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=12.4
+VERSION=12.5
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -54,7 +54,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf mailx-$VERSION
-tar xvf $CWD/mailx-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/mailx-$VERSION.tar.?z* || exit 1
 cd mailx-$VERSION || exit 1
 chown -R root:root .
 find . \
@@ -94,7 +94,21 @@ mkdir -p $PKG/bin
 mv $PKG/etc/nail.rc $PKG/etc/nail.rc.new
 strip $PKG/usr/bin/mailx
 
-gzip -9 $PKG/usr/man/man1/*
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
 # Manpage links:
 ( cd $PKG/usr/man/man1
   ln -sf mailx.1.gz mail.1.gz
@@ -104,9 +118,17 @@ gzip -9 $PKG/usr/man/man1/*
 
 mkdir -p $PKG/usr/doc/mailx-$VERSION
 cp -a \
-  AUTHORS COPYING* ChangeLog INSTALL README TODO \
+  AUTHORS COPYING* INSTALL README TODO \
   $PKG/usr/doc/mailx-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/n/mobile-broadband-provider-info/README b/source/n/mobile-broadband-provider-info/README
new file mode 100644
index 00000000..0edda744
--- /dev/null
+++ b/source/n/mobile-broadband-provider-info/README
@@ -0,0 +1,2 @@
+This package contains mobile broadband settings for different service 
+providers in different countries.
diff --git a/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.SlackBuild b/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.SlackBuild
new file mode 100755
index 00000000..63dc5959
--- /dev/null
+++ b/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.SlackBuild
@@ -0,0 +1,124 @@
+#!/bin/sh
+
+# Slackware build script for mobile-broadband-provider-info
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2011, 2012  by Eric Hameleers, Eindhoven, NL
+
+PKGNAM=mobile-broadband-provider-info
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+TAG=${TAG:-}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z*
+cd $PKGNAM-$VERSION
+
+# Fix missing @ in .pc file:
+zcat $CWD/mobile-broadband-provider-info.pc.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+[ ! -x configure ] && ./autogen.sh
+
+sed -i -e \
+  's#pkgconfigdir = $(datadir)/pkgconfig#pkgconfigdir = $(libdir)/pkgconfig#' \
+  Makefile.in
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$TARGET
+
+make
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING ChangeLog NEWS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}
+
diff --git a/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.pc.diff b/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.pc.diff
new file mode 100644
index 00000000..fe326518
--- /dev/null
+++ b/source/n/mobile-broadband-provider-info/mobile-broadband-provider-info.pc.diff
@@ -0,0 +1,10 @@
+--- ./mobile-broadband-provider-info.pc.in.orig	2012-01-22 14:06:15.000000000 -0600
++++ ./mobile-broadband-provider-info.pc.in	2012-04-14 15:24:56.990965523 -0500
+@@ -1,6 +1,6 @@
+ prefix=@prefix@
+ exec_prefix=@exec_prefix@
+-libdir=@libdir
++libdir=@libdir@
+ datarootdir = @datarootdir@
+ pkgdatadir=${datarootdir}/@PACKAGE@
+ includedir=@includedir@
diff --git a/source/n/mobile-broadband-provider-info/slack-desc b/source/n/mobile-broadband-provider-info/slack-desc
new file mode 100644
index 00000000..100517f8
--- /dev/null
+++ b/source/n/mobile-broadband-provider-info/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                              |-----handy-ruler------------------------------------------------------|
+mobile-broadband-provider-info: mobile-broadband-provider-info (service provider settings)
+mobile-broadband-provider-info:
+mobile-broadband-provider-info: This package contains mobile broadband settings for service providers
+mobile-broadband-provider-info: in various countries.
+mobile-broadband-provider-info:
+mobile-broadband-provider-info:
+mobile-broadband-provider-info:
+mobile-broadband-provider-info: For more info, see:
+mobile-broadband-provider-info:
+mobile-broadband-provider-info: http://live.gnome.org/NetworkManager/MobileBroadband/ServiceProviders
+mobile-broadband-provider-info:
diff --git a/source/n/mtr/mtr.SlackBuild b/source/n/mtr/mtr.SlackBuild
index 4ebea21e..23a9c707 100755
--- a/source/n/mtr/mtr.SlackBuild
+++ b/source/n/mtr/mtr.SlackBuild
@@ -72,7 +72,9 @@ CFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --localstatedir=/var \
   --sysconfdir=/etc \
-  --enable-gtk2 \
+  --without-gtk \
+  --without-gtk2 \
+  --without-gtk3 \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
diff --git a/source/n/mutt/mutt.SlackBuild b/source/n/mutt/mutt.SlackBuild
index 3de6e307..9484bc27 100755
--- a/source/n/mutt/mutt.SlackBuild
+++ b/source/n/mutt/mutt.SlackBuild
@@ -21,7 +21,7 @@
 
 PKGNAM=mutt
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/net-snmp/net-snmp.SlackBuild b/source/n/net-snmp/net-snmp.SlackBuild
index 88ef2d43..2f2a3ead 100755
--- a/source/n/net-snmp/net-snmp.SlackBuild
+++ b/source/n/net-snmp/net-snmp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=net-snmp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/net-snmp/slack-desc b/source/n/net-snmp/slack-desc
index 7659f7fc..4c272386 100644
--- a/source/n/net-snmp/slack-desc
+++ b/source/n/net-snmp/slack-desc
@@ -14,6 +14,6 @@ net-snmp: An extensible agent
 net-snmp: An SNMP library
 net-snmp: Tools to request or set information from SNMP agents
 net-snmp: Tools to generate and handle SNMP traps
-net-snmp: A version of the unix 'netstat' command using SNMP
+net-snmp: A version of the UNIX 'netstat' command using SNMP
 net-snmp: A graphical Perl/Tk/SNMP based mib browser
 net-snmp:
diff --git a/source/n/net-tools/net-tools.SlackBuild b/source/n/net-tools/net-tools.SlackBuild
index 5f11755d..ce08001d 100755
--- a/source/n/net-tools/net-tools.SlackBuild
+++ b/source/n/net-tools/net-tools.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,8 +22,8 @@
 
 
 PKGNAM=net-tools
-VERSION=${VERSION:-1.60}
-BUILD=${BUILD:-3}
+VERSION=${VERSION:-1.60.20120726git}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -54,8 +54,11 @@ else
 fi
 
 cd $TMP
-tar xjvf $CWD/net-tools-1.60.tar.bz2 || exit 1
-cd net-tools-1.60
+rm -rf net-tools-$VERSION
+tar xvf $CWD/net-tools-$VERSION.tar.xz || exit 1
+cd net-tools-$VERSION || exit 1
+
+zcat $CWD/net-tools.config.h.gz > config.h
 
 chown -R root:root .
 find . \
@@ -64,18 +67,12 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-zcat $CWD/net-tools_1.60-23.diff.gz | patch -p1 --backup --verbose || exit 1
-zcat $CWD/net-tools.diff.gz | patch -p1 --backup --verbose || exit 1
-zcat $CWD/net-tools.struct.x25_address.gcc4.diff.gz | patch -p1 --backup --verbose || exit 1
-zcat $CWD/net-tools.switch.default.gcc4.diff.gz | patch -p1 --backup --verbose || exit 1
-zcat $CWD/net-tools.mii-tool.string.diff.gz | patch -p1 --backup --verbose || exit 1
-
-mkdir -p $PKG/usr/doc/net-tools-1.60
-cp -a README README.ipv6 $PKG/usr/doc/net-tools-1.60
-chmod 644 $PKG/usr/doc/net-tools-1.60/*
-chown root:root $PKG/usr/doc/net-tools-1.60/*
-HAVE_IP_TOOLS=1 HAVE_MII=1 make
-HAVE_IP_TOOLS=1 HAVE_MII=1 make hostname
+mkdir -p $PKG/usr/doc/net-tools-$VERSION
+cp -a COPYING* README* $PKG/usr/doc/net-tools-$VERSION
+chmod 644 $PKG/usr/doc/net-tools-$VERSION/*
+chown root:root $PKG/usr/doc/net-tools-$VERSION/*
+HAVE_IP_TOOLS=1 HAVE_MII=1 make || exit 1
+HAVE_IP_TOOLS=1 HAVE_MII=1 make hostname || exit 1
 strip --strip-unneeded ipmaddr iptunnel hostname arp ifconfig nameif rarp route netstat plipconfig slattach mii-tool
 mkdir -p $PKG/sbin $PKG/bin $PKG/usr/sbin
 cat arp > $PKG/sbin/arp
diff --git a/source/n/net-tools/net-tools.config.h b/source/n/net-tools/net-tools.config.h
new file mode 100644
index 00000000..e271f863
--- /dev/null
+++ b/source/n/net-tools/net-tools.config.h
@@ -0,0 +1,78 @@
+/*
+* config.h	Automatically generated configuration includefile
+*
+* NET-TOOLS	A collection of programs that form the base set of the
+*		NET-3 Networking Distribution for the LINUX operating
+*		system.
+*
+*		DO  NOT  EDIT  DIRECTLY
+*
+*/
+
+/* 
+ * 
+ * Internationalization
+ * 
+ * The net-tools package has currently been translated to French,
+ * German and Brazilian Portugese.  Other translations are, of
+ * course, welcome.  Answer `n' here if you have no support for
+ * internationalization on your system.
+ * 
+ */
+#define I18N 1
+
+/* 
+ * 
+ * Protocol Families.
+ * 
+ */
+#define HAVE_AFUNIX 1
+#define HAVE_AFINET 1
+#define HAVE_AFINET6 1
+#define HAVE_AFIPX 1
+#define HAVE_AFATALK 1
+#define HAVE_AFAX25 1
+#define HAVE_AFNETROM 1
+#define HAVE_AFROSE 0
+#define HAVE_AFX25 1
+#define HAVE_AFECONET 0
+#define HAVE_AFDECnet 0
+#define HAVE_AFASH 0
+#define HAVE_AFBLUETOOTH 1
+
+/* 
+ * 
+ * Device Hardware types.
+ * 
+ */
+#define HAVE_HWETHER 1
+#define HAVE_HWARC 1
+#define HAVE_HWSLIP 1
+#define HAVE_HWPPP 1
+#define HAVE_HWTUNNEL 1
+#define HAVE_HWSTRIP 1
+#define HAVE_HWTR 1
+#define HAVE_HWAX25 1
+#define HAVE_HWROSE 0
+#define HAVE_HWNETROM 1
+#define HAVE_HWX25 1
+#define HAVE_HWFR 1
+#define HAVE_HWSIT 0
+#define HAVE_HWFDDI 1
+#define HAVE_HWHIPPI 1
+#define HAVE_HWASH 0
+#define HAVE_HWHDLCLAPB 0
+#define HAVE_HWIRDA 1
+#define HAVE_HWEC 0
+#define HAVE_HWEUI64 1
+#define HAVE_HWIB 1
+
+/* 
+ * 
+ * Other Features.
+ * 
+ */
+#define HAVE_FW_MASQUERADE 1
+#define HAVE_IP_TOOLS 1
+#define HAVE_MII 1
+#define HAVE_SELINUX 0
diff --git a/source/n/net-tools/net-tools.diff b/source/n/net-tools/net-tools.diff
deleted file mode 100644
index a19af202..00000000
--- a/source/n/net-tools/net-tools.diff
+++ /dev/null
@@ -1,77 +0,0 @@
---- ./config.h.orig	Wed Mar 21 21:23:31 2001
-+++ ./config.h	Wed Mar 21 21:23:12 2001
-@@ -0,0 +1,74 @@
-+/*
-+* config.h	Automatically generated configuration includefile
-+*
-+* NET-TOOLS	A collection of programs that form the base set of the
-+*		NET-3 Networking Distribution for the LINUX operating
-+*		system.
-+*
-+*		DO  NOT  EDIT  DIRECTLY
-+*
-+*/
-+
-+/* 
-+ * 
-+ * Internationalization
-+ * 
-+ * The net-tools package has currently been translated to French,
-+ * German and Brazilian Portugese.  Other translations are, of
-+ * course, welcome.  Answer `n' here if you have no support for
-+ * internationalization on your system.
-+ * 
-+ */
-+#define I18N 1
-+
-+/* 
-+ * 
-+ * Protocol Families.
-+ * 
-+ */
-+#define HAVE_AFUNIX 1
-+#define HAVE_AFINET 1
-+#define HAVE_AFINET6 1
-+#define HAVE_AFIPX 1
-+#define HAVE_AFATALK 1
-+#define HAVE_AFAX25 1
-+#define HAVE_AFNETROM 1
-+#define HAVE_AFROSE 0
-+#define HAVE_AFX25 1
-+#define HAVE_AFECONET 0
-+#define HAVE_AFDECnet 0
-+#define HAVE_AFASH 0
-+
-+/* 
-+ * 
-+ * Device Hardware types.
-+ * 
-+ */
-+#define HAVE_HWETHER 1
-+#define HAVE_HWARC 1
-+#define HAVE_HWSLIP 1
-+#define HAVE_HWPPP 1
-+#define HAVE_HWTUNNEL 1
-+#define HAVE_HWSTRIP 1
-+#define HAVE_HWTR 1
-+#define HAVE_HWAX25 1
-+#define HAVE_HWROSE 0
-+#define HAVE_HWNETROM 1
-+#define HAVE_HWX25 1
-+#define HAVE_HWFR 1
-+#define HAVE_HWSIT 0
-+#define HAVE_HWFDDI 0
-+#define HAVE_HWHIPPI 0
-+#define HAVE_HWASH 0
-+#define HAVE_HWHDLCLAPB 0
-+#define HAVE_HWIRDA 1
-+#define HAVE_HWEC 0
-+
-+/* 
-+ * 
-+ * Other Features.
-+ * 
-+ */
-+#define HAVE_FW_MASQUERADE 1
-+#define HAVE_IP_TOOLS 1
-+#define HAVE_MII 1
diff --git a/source/n/net-tools/net-tools.mii-tool.string.diff b/source/n/net-tools/net-tools.mii-tool.string.diff
deleted file mode 100644
index aaa5b09e..00000000
--- a/source/n/net-tools/net-tools.mii-tool.string.diff
+++ /dev/null
@@ -1,29 +0,0 @@
---- ./mii-tool.c.orig	2000-05-21 09:31:17.000000000 -0500
-+++ ./mii-tool.c	2010-08-12 12:46:05.063607571 -0500
-@@ -379,16 +379,16 @@
- /*--------------------------------------------------------------------*/
- 
- const char *usage =
--"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...]
--       -V, --version               display version information
--       -v, --verbose               more verbose output
--       -R, --reset                 reset MII to poweron state
--       -r, --restart               restart autonegotiation
--       -w, --watch                 monitor for link status changes
--       -l, --log                   with -w, write events to syslog
--       -A, --advertise=media,...   advertise only specified media
--       -F, --force=media           force specified media technology
--media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
-+"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...] \n\
-+       -V, --version               display version information \n\
-+       -v, --verbose               more verbose output \n\
-+       -R, --reset                 reset MII to poweron state \n\
-+       -r, --restart               restart autonegotiation \n\
-+       -w, --watch                 monitor for link status changes \n\
-+       -l, --log                   with -w, write events to syslog \n\
-+       -A, --advertise=media,...   advertise only specified media \n\
-+       -F, --force=media           force specified media technology \n\
-+media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD, \n\
-        (to advertise both HD and FD) 100baseTx, 10baseT\n";
- 
- int main(int argc, char **argv)
diff --git a/source/n/net-tools/net-tools.struct.x25_address.gcc4.diff b/source/n/net-tools/net-tools.struct.x25_address.gcc4.diff
deleted file mode 100644
index 25a42ed7..00000000
--- a/source/n/net-tools/net-tools.struct.x25_address.gcc4.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./lib/x25_sr.c.orig	2000-05-20 08:38:10.000000000 -0500
-+++ ./lib/x25_sr.c	2010-08-12 12:13:35.147112052 -0500
-@@ -77,7 +77,7 @@
-   rt.sigdigits=sigdigits;
- 
-   /* x25_route_struct.address isn't type struct sockaddr_x25, Why? */
--  memcpy(&rt.address, &sx25.sx25_addr, sizeof(x25_address));
-+  memcpy(&rt.address, &sx25.sx25_addr, sizeof(struct x25_address));
- 
-   while (*args) {
- 	if (!strcmp(*args,"device") || !strcmp(*args,"dev")) {
diff --git a/source/n/net-tools/net-tools.switch.default.gcc4.diff b/source/n/net-tools/net-tools.switch.default.gcc4.diff
deleted file mode 100644
index 4d7090e0..00000000
--- a/source/n/net-tools/net-tools.switch.default.gcc4.diff
+++ /dev/null
@@ -1,42 +0,0 @@
---- ./hostname.c.orig	2001-04-08 12:04:23.000000000 -0500
-+++ ./hostname.c	2010-08-12 12:19:29.181510641 -0500
-@@ -78,6 +78,7 @@
-             fprintf(stderr, _("%s: name too long\n"), program_name);
-             break;
-         default:
-+            break;
-         }
- 	exit(1);
-     }
-@@ -98,6 +99,7 @@
- 	    fprintf(stderr, _("%s: name too long\n"), program_name);
- 	    break;
- 	default:
-+            break;
- 	}
- 	exit(1);
-     };
-@@ -117,6 +119,7 @@
- 	    fprintf(stderr, _("%s: name too long\n"), program_name);
- 	    break;
- 	default:
-+	    break;
- 	}
- 	exit(1);
-     };
-@@ -174,6 +177,7 @@
- 	printf("%s\n", hp->h_name);
- 	break;
-     default:
-+        break;
-     }
- }
- 
-@@ -330,7 +334,6 @@
- 	case 'h':
- 	default:
- 	    usage();
--
- 	};
- 
- 
diff --git a/source/n/net-tools/net-tools.url b/source/n/net-tools/net-tools.url
new file mode 100644
index 00000000..61da371e
--- /dev/null
+++ b/source/n/net-tools/net-tools.url
@@ -0,0 +1 @@
+# git archive --format=tar --remote=git://net-tools.git.sourceforge.net/gitroot/net-tools/net-tools master > net-tools.tar.xz
diff --git a/source/n/net-tools/net-tools_1.60-23.diff b/source/n/net-tools/net-tools_1.60-23.diff
deleted file mode 100644
index 449d62c3..00000000
--- a/source/n/net-tools/net-tools_1.60-23.diff
+++ /dev/null
@@ -1,33404 +0,0 @@
---- net-tools-1.60.orig/debian/compat
-+++ net-tools-1.60/debian/compat
-@@ -0,0 +1 @@
-+5
---- net-tools-1.60.orig/debian/README.source
-+++ net-tools-1.60/debian/README.source
-@@ -0,0 +1,5 @@
-+This package uses quilt to manage all modifications to the upstream
-+source.  Changes are stored in the source package as diffs in
-+debian/patches and applied during the build.
-+
-+See /usr/share/doc/quilt/README.source for a detailed explanation.
---- net-tools-1.60.orig/debian/rules
-+++ net-tools-1.60/debian/rules
-@@ -0,0 +1,81 @@
-+#!/usr/bin/make -f
-+
-+include /usr/share/quilt/quilt.make
-+
-+# Uncomment this to turn on verbose mode.
-+#export DH_VERBOSE=1
-+
-+# This has to be exported to make some magic below work.
-+export DH_OPTIONS
-+
-+# These are used for cross-compiling and for saving the configure script
-+# from having to guess our platform (since we know it already)
-+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-+
-+configure: configure-stamp
-+configure-stamp: $(QUILT_STAMPFN)
-+	[ ! -f config.make ] || mv config.make debian/config.make.bk
-+	cp -f debian/config.make config.make
-+	[ ! -f config.h ] || mv config.h debian/config.h.bk
-+	cp -f debian/config.h config.h
-+	dh_testdir
-+	touch $@
-+
-+build: build-stamp
-+build-stamp: configure-stamp
-+	dh_testdir
-+	$(MAKE) PROGS="ifconfig arp netstat route rarp slattach plipconfig \
-+		nameif iptunnel ipmaddr mii-tool"
-+	touch $@
-+
-+clean: unpatch
-+	dh_testdir
-+	dh_testroot
-+	rm -f build-stamp configure-stamp
-+	[ ! -f Makefile ] || $(MAKE) clobber
-+	[ ! -f debian/config.h.bk ] || \
-+		mv debian/config.h.bk config.h
-+	[ ! -f debian/config.make.bk ] || \
-+		mv debian/config.make.bk config.make
-+	dh_clean
-+
-+MANPAGES = arp.8 ethers.5 ifconfig.8 mii-tool.8 nameif.8 netstat.8 \
-+	   plipconfig.8 rarp.8 route.8 slattach.8
-+
-+install: build
-+	dh_testdir
-+	dh_testroot
-+	dh_clean -k
-+	dh_installdirs bin sbin usr/sbin
-+	dh_install
-+	$(MAKE) -C po install BASEDIR=$(CURDIR)/debian/net-tools
-+	dh_installman --language=de \
-+		$(wildcard $(addprefix man/de_DE/,$(MANPAGES)))
-+	dh_installman --language=C \
-+		$(wildcard $(addprefix man/en_US/,$(MANPAGES)))
-+	dh_installman --language=fr \
-+		$(wildcard $(addprefix man/fr_FR/,$(MANPAGES)))
-+	dh_installman --language=pt_BR \
-+		$(wildcard $(addprefix man/pt_BR/,$(MANPAGES)))
-+
-+binary-indep: build install
-+
-+binary-arch: build install
-+	dh_testdir
-+	dh_testroot
-+	dh_installchangelogs
-+	dh_installdocs README README.ipv6 TODO
-+	dh_link
-+	dh_strip
-+	dh_compress
-+	dh_fixperms
-+	dh_installdeb
-+	dh_shlibdeps
-+	dh_gencontrol
-+	dh_md5sums
-+	dh_builddeb
-+
-+binary: binary-arch binary-indep
-+.PHONY: build clean binary-indep binary-arch binary install install-indep \
-+	install-arch
---- net-tools-1.60.orig/debian/config.h
-+++ net-tools-1.60/debian/config.h
-@@ -0,0 +1,75 @@
-+/*
-+* config.h	Automatically generated configuration includefile
-+*
-+* NET-TOOLS	A collection of programs that form the base set of the
-+*		NET-3 Networking Distribution for the LINUX operating
-+*		system.
-+*
-+*		DO  NOT  EDIT  DIRECTLY
-+*
-+*/
-+
-+/* 
-+ * 
-+ * Internationalization
-+ * 
-+ * The net-tools package has currently been translated to French,
-+ * German and Brazilian Portugese.  Other translations are, of
-+ * course, welcome.  Answer `n' here if you have no support for
-+ * internationalization on your system.
-+ * 
-+ */
-+#define I18N 1
-+
-+/* 
-+ * 
-+ * Protocol Families.
-+ * 
-+ */
-+#define HAVE_AFUNIX 1
-+#define HAVE_AFINET 1
-+#define HAVE_AFINET6 1
-+#define HAVE_AFIPX 1
-+#define HAVE_AFATALK 1
-+#define HAVE_AFAX25 1
-+#define HAVE_AFNETROM 1
-+#define HAVE_AFROSE 1
-+#define HAVE_AFX25 1
-+#define HAVE_AFECONET 1
-+#define HAVE_AFDECnet 1
-+#define HAVE_AFASH 1
-+
-+/* 
-+ * 
-+ * Device Hardware types.
-+ * 
-+ */
-+#define HAVE_HWETHER 1
-+#define HAVE_HWARC 1
-+#define HAVE_HWSLIP 1
-+#define HAVE_HWPPP 1
-+#define HAVE_HWTUNNEL 1
-+#define HAVE_HWSTRIP 1
-+#define HAVE_HWTR 1
-+#define HAVE_HWAX25 1
-+#define HAVE_HWROSE 1
-+#define HAVE_HWNETROM 1
-+#define HAVE_HWX25 1
-+#define HAVE_HWFR 1
-+#define HAVE_HWSIT 1
-+#define HAVE_HWFDDI 1
-+#define HAVE_HWHIPPI 1
-+#define HAVE_HWASH 1
-+#define HAVE_HWHDLCLAPB 1
-+#define HAVE_HWIRDA 1
-+#define HAVE_HWEC 1
-+#define HAVE_HWEUI64 1
-+
-+/* 
-+ * 
-+ * Other Features.
-+ * 
-+ */
-+#define HAVE_FW_MASQUERADE 1
-+#define HAVE_IP_TOOLS 1
-+#define HAVE_MII 1
---- net-tools-1.60.orig/debian/config.make
-+++ net-tools-1.60/debian/config.make
-@@ -0,0 +1,36 @@
-+I18N=1
-+HAVE_AFUNIX=1
-+HAVE_AFINET=1
-+HAVE_AFINET6=1
-+HAVE_AFIPX=1
-+HAVE_AFATALK=1
-+HAVE_AFAX25=1
-+HAVE_AFNETROM=1
-+HAVE_AFROSE=1
-+HAVE_AFX25=1
-+HAVE_AFECONET=1
-+HAVE_AFDECnet=1
-+HAVE_AFASH=1
-+HAVE_HWETHER=1
-+HAVE_HWARC=1
-+HAVE_HWSLIP=1
-+HAVE_HWPPP=1
-+HAVE_HWTUNNEL=1
-+HAVE_HWSTRIP=1
-+HAVE_HWTR=1
-+HAVE_HWAX25=1
-+HAVE_HWROSE=1
-+HAVE_HWNETROM=1
-+HAVE_HWX25=1
-+HAVE_HWFR=1
-+HAVE_HWSIT=1
-+HAVE_HWFDDI=1
-+HAVE_HWHIPPI=1
-+HAVE_HWASH=1
-+HAVE_HWHDLCLAPB=1
-+HAVE_HWIRDA=1
-+HAVE_HWEC=1
-+HAVE_EUI64=1
-+HAVE_FW_MASQUERADE=1
-+HAVE_IP_TOOLS=1
-+HAVE_MII=1
---- net-tools-1.60.orig/debian/install
-+++ net-tools-1.60/debian/install
-@@ -0,0 +1,11 @@
-+arp		/usr/sbin
-+ifconfig	/sbin
-+nameif		/sbin
-+plipconfig	/sbin
-+rarp		/sbin
-+route		/sbin
-+slattach	/sbin
-+ipmaddr		/sbin
-+iptunnel	/sbin
-+mii-tool	/sbin
-+netstat		/bin
---- net-tools-1.60.orig/debian/control
-+++ net-tools-1.60/debian/control
-@@ -0,0 +1,22 @@
-+Source: net-tools
-+Section: net
-+Priority: important
-+Build-Depends: debhelper (> 5), gettext, quilt
-+Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
-+Uploaders: Luk Claes <luk@debian.org>, Martín Ferrari <tincho@debian.org>
-+Standards-Version: 3.8.1
-+
-+Package: net-tools
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Replaces: netbase (<< 4.00), ja-trans (<= 0.8-2)
-+Conflicts: ja-trans (<= 0.8-2)
-+Description: The NET-3 networking toolkit
-+ This package includes the important tools for controlling the network
-+ subsystem of the Linux kernel.  This includes arp, ifconfig, netstat, 
-+ rarp, nameif and route.  Additionally, this package contains utilities
-+ relating to particular network hardware types (plipconfig, slattach, 
-+ mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
-+ .
-+ In the upstream package 'hostname' and friends are included. Those are
-+ not installed by this package, since there is a special "hostname*.deb".
---- net-tools-1.60.orig/debian/copyright
-+++ net-tools-1.60/debian/copyright
-@@ -0,0 +1,31 @@
-+Format-Specification: http://wiki.debian.org/Proposals/CopyrightFormat?action=recall&rev=437
-+Upstream-Maintainer: Phil Blundell <philb@gnu.org>, 
-+                     Bernd Eckenfels <net-tools@lina.inka.de>
-+Upstream-Source: https://developer.berlios.de/projects/net-tools/
-+
-+Files: *
-+Copyright: © 1988-1994 MicroWalt Corporation
-+Copyright: © 1995-1996 Bernd Eckenfels
-+Copyright: © 1997-2000 Andi Kleen
-+Copyright: © 1997-2000 Donald Becker
-+License: GPL-2+
-+ The copyright attribution has been derived from individual files' text, but
-+ each file may have different copyright holders, and some may be missing. See
-+ the source code for details.
-+ .
-+ This program is free software; you can redistribute it and/or modify it under
-+ the terms of  the GNU General Public  License as  published by  the  Free
-+ Software Foundation;  either  version 2 of the License, or  (at your option)
-+ any later version.
-+ .
-+ On Debian GNU/Linux systems, the complete text of the GNU General Public
-+ License can be found in `/usr/share/common-licenses/GPL-2'
-+
-+Files: debian/*
-+Copyright: © 2008-2009 Luk Claes, Martín Ferrari
-+Copyright: © 2000-2007 Bernd Eckenfels
-+Copyright: © 2000 Anthony Towns
-+License: GPL-2+
-+ It is assumed that all contributors put their work under the same license
-+ as the module itself.
-+
---- net-tools-1.60.orig/debian/changelog
-+++ net-tools-1.60/debian/changelog
-@@ -0,0 +1,347 @@
-+net-tools (1.60-23) unstable; urgency=low
-+
-+  * debian/patches/Bug#254243-netstat.c-wide-opt.patch: Converted last patch
-+    from Luar Roji to a quilt patch.
-+  * Many changes done in diff.gz that are also present in upstream's CVS:
-+    - debian/patches/CVS-20020730-route.c_opts_64.patch
-+    - debian/patches/CVS-20061011-ipmaddr.c_buffer_overflow.patch
-+    - debian/patches/CVS-20081003-statistics.c_sync.patch
-+    - debian/patches/CVS-20071202-rarp.c_sync.patch
-+    - debian/patches/CVS-20070316-netstat.c_sync.patch
-+    - debian/patches/CVS-20060927-mii-tool.c_sync.patch
-+    - debian/patches/CVS-20051204-arp.c_sync.patch
-+    - debian/patches/CVS-20030911-nameif.c_sync.patch
-+    - debian/patches/CVS-20081002-ifconfig.c_sync.patch
-+    - debian/patches/CVS-20031011-hostname.c_sync.patch
-+    - debian/patches/CVS-20051204-slttach.c_sync.patch
-+    - debian/patches/CVS-20061011-includes_sync.patch
-+    - debian/patches/CVS-lib_sync.patch
-+    - debian/patches/CVS-20081003-config.in_sync.patch
-+    - debian/patches/CVS-20081002-manpages_sync.patch
-+  * Some unsyncable patches converted from diff.gz:
-+    - debian/patches/netstat.c-assorted_changes.patch
-+    - debian/patches/translations.patch
-+    - debian/patches/local-manpages.patch
-+    - debian/patches/lib_local_changes.patch
-+    - debian/patches/netstat.c-local_changes.patch
-+  * Reverted changes to Makefile and README.
-+  * debian/watch: added watchfile.
-+  * debian/control, debian/compat: Added versioned dependency on debhelper (it
-+    was version 1!)
-+  * debian/rules: made from scratch. Closes: #443063.
-+  * Added quilt dependencies and hooks.
-+  * debian/control: updated Standards-Version.
-+  * debian/README.source: added to comply with S-V 3.8.1.
-+  * debian/patches/local-manpages.patch: more manpage fixes.
-+  * debian/patches/translations.patch: fix encoding for .po files.
-+  * debia/rules: supercede Makefile install with custom commands.
-+  * debian/copyright: new format, and attempt to provide a real copyright
-+    file. Still, the attribution is a mess.
-+  * debian/patches/Bug#345331-socket_overflow.patch: patch from Antonio Galea
-+    that solves an issue when the socket number exceeds 2^31. Closes: #345331.
-+
-+ -- Martín Ferrari <tincho@debian.org>  Mon, 16 Mar 2009 01:58:18 -0300
-+
-+net-tools (1.60-22) unstable; urgency=low
-+
-+  * Add new command line option -W/--wide to netstat which prevents 
-+    truncation of IPv6 addresses (Closes: #254243). Thanks Luar Roji.
-+
-+ -- Luk Claes <luk@debian.org>  Sun, 16 Nov 2008 17:53:05 +0100
-+
-+net-tools (1.60-21) unstable; urgency=low
-+
-+  * Update maintainer to net-tools Team.
-+  * Support ipv6 stats in netstat (Closes: #453859).
-+  * Fix closes statements in changelog entry.
-+  * Add hardware support for InfiniBand (Closes: #294252).
-+
-+ -- Luk Claes <luk@debian.org>  Sat, 27 Sep 2008 19:40:40 +0200
-+
-+net-tools (1.60-20) unstable; urgency=low
-+
-+  * New maintainer (Closes: #486004).
-+  * Don't segfault when /proc/net/dev is not available (Closes: #222209).
-+  * Find IPv6 addresses for interfaces with ifindex > 255 (Closes: #433543).
-+  * Skip . and .. in netstat as they are invalid (Closes: #234447).
-+  * Fix hyphenation for manpages (Closes: #288343).
-+
-+ -- Luk Claes <luk@debian.org>  Tue, 16 Sep 2008 15:22:20 +0200
-+
-+net-tools (1.60-19) unstable; urgency=low
-+
-+  * fixed netstat(8) (interfaceS) reported by Liu Xing. (Closes: Bug#435690)
-+  * fixed interface name truncation (Closes: Bug#405521)
-+    Thank you Csaba Szep.
-+  * fixed pt error string (Closes: Bug#403033)
-+  * fixed route samples (Closes: Bug#400844, #368697) Thanks Danny Rathjens.
-+  * fixed ifconfig(8) see also section (Closes: Bug#365916) Dan Jacobs.
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 02 Dec 2007 06:27:41 +0100
-+
-+net-tools (1.60-18) unstable; urgency=low
-+
-+  * Thanks for the l10n NMU to Kenshi Muto
-+  * fixed hostname compile problems
-+  * better error handling and speedup for proc file reading
-+  * improved mii-tool (more media types)
-+  * fixed string length contraint in ipmaddr
-+  * fixed ipx /proc/net (alternate naming)
-+  * smaller fixed to netstat(8) (de) 2002-02-20 - still incomplete
-+  * expanded arp(8) (en) 2007-12-01
-+  * added -4 and -6 to netstat(8) 02 October 2003
-+  * formatting fixed rarp(8)+slattach(8)  [en]
-+  * formatting fixed arp(8), rarp(8), ifconfig(8), hostname(1) [fr]
-+  * fixed slattach -L to not require HW handshake anymore
-+  * netstat -n: show v4inv6 mapped addressses as v4
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 02 Dec 2007 03:28:17 +0100
-+
-+net-tools (1.60-17.2) unstable; urgency=low
-+
-+  * l10n NMU
-+  * Set conflict against ja-trans which has obsolete Japanese
-+    translations only for net-tools. (closes: #447327)
-+
-+ -- Kenshi Muto <kmuto@debian.org>  Sat, 20 Oct 2007 18:00:34 +0900
-+
-+net-tools (1.60-17.1) unstable; urgency=low
-+
-+  * l10n NMU
-+  * Updated net-tools.pot.
-+  * Updated Japanese translation (closes: Bug#432338)
-+  * Updated German translation (closes: #313808)
-+
-+ -- Kenshi Muto <kmuto@debian.org>  Thu, 11 Oct 2007 19:44:26 +0900
-+
-+net-tools (1.60-17) unstable; urgency=medium
-+
-+  * arp.c: bus error on sparc64 with latest gcc fixed. (Closes: Bug#340384)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 04 Dec 2005 05:47:05 +0100
-+
-+net-tools (1.60-16) unstable; urgency=low
-+
-+  * spelling fix to slattach(8) (Closes: Bug#326124 (patch by A.Costa)
-+  * inet.c: portability fix for 64bit.
-+  * comment cleanups to aliagn with 1.65 cvs
-+    * net-support.h, inet_sr.c, nstrcmp.c, arp.c, ether.h
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 24 Oct 2005 22:05:38 +0200
-+
-+net-tools (1.60-15) unstable; urgency=low
-+
-+  * minor formating fix to ifconfig(8)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 30 Jun 2005 21:49:52 +0200
-+
-+net-tools (1.60-14) unstable; urgency=low
-+
-+  * added iptables(8) in ifconfig(8) (thanks Toralf Förster)
-+  * more usage updates in ifconfig.8 (used upstream HEAD=1.11)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 30 Jun 2005 20:51:18 +0200
-+
-+net-tools (1.60-13) unstable; urgency=low
-+
-+  * X25 code compiles with 2.4 and 2.6 kernel headers (Closes: Bug#271678)
-+  * IMPORTANT: make ifconfig show alias interfaces in 2.6 again. 
-+  * resort media type array to match kernel (Closes: Bug#199920)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Tue, 17 May 2005 01:28:51 +0200
-+
-+net-tools (1.60-12) unstable; urgency=low
-+
-+  * make TR hw address type work for new kernel (Closes: Bug #79462, #203400)
-+  * update-po uses msgmerge, new net-tools.pot (Closes: Bug: 271426)
-+  * de-support dontpub option in arp -? und arp.8 (Closes: Bug #203396)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 16 May 2005 06:33:48 +0200
-+
-+net-tools (1.60-11) unstable; urgency=low
-+
-+  * spelling fixes (Closes: Bug #305640, #305638, 305637)
-+  * nameif.c avoid overflow by malicious kernel
-+  * avoid overflow of the TX-OK Column (Closes: Bug #308922)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 14 May 2005 01:48:45 +0200
-+
-+net-tools (1.60-10) unstable; urgency=low
-+
-+  * typo fix in po/de.po for german arp command output (Closes: Bug #176151)
-+  * added diagnostics messages to mii-tool.8 (Closes: Bug #239229)
-+  * new version of nstrcmp (Closes: Bug #226503)
-+  * enable EUI64 support
-+  * stadanrds version 3.6.1 (no changes)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Fri, 23 Apr 2004 00:57:20 +0200
-+
-+net-tools (1.60-9) unstable; urgency=medium
-+
-+  * debian/changelog: fixed in last entry fixed bug from 197925 to 197924
-+  * include linux/sockios.h for SIOCGMIIPHY definition (new style)
-+    which will fix MII reporting on 2.4 kernels. (Closes: Bug #133648)
-+    NOTE: this will now require root to work, it will also not work on
-+    older kernels.
-+  * Rene Engelhard's patch to make AF X25 compile with 2.6 headers (Closes: Bug #223091)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 29 Dec 2003 13:42:20 +0100
-+
-+net-tools (1.60-8) unstable; urgency=medium
-+
-+  * lib/interface.c: backed off change which skipped reading ioctl 
-+    interfacelist, if _proc interfacelist was ok, which does not work,
-+    because alias interfaces are only in ioctl list available. It is 
-+    also falling back to the original lib/nstrcml.c because the
-+    comparision if : is present does not work.
-+    (Closes: bug #197924, #197582, #197269)
-+  * bumped standards version (no changes)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 28 Jun 2003 02:56:38 +0200
-+
-+net-tools (1.60-7) unstable; urgency=low
-+
-+  * interfaces.c: cvs version fixes Connectiva Bug #5711 (Closes: #149576)
-+    from Eduardo Pereira Habkost
-+  * netstat.c: cvs version adds support for tcp6,udp6,icmp6 protocols
-+  * netstat.c: cvs version adds support for -4 or -6 cmd line shortcut
-+  * netstat.c: cvs version adds fix for inode 
-+    signedness (Closes: #134600, #78932)
-+  * ifconfig: removed -i from usage (Closes: #181528)
-+  * make gcc 3.3 happy: added ull unsigned long long prefix to constant
-+  * lib/ddp_gr.c+pathnames.h: first support for appletalk routing from cvs
-+  * lib/eui64.c+hw.c+Makefile: forst support for new hw type from cvs
-+  * lib/interface.c: cvs fix for column run-into (Closes: #161080)
-+  * lib/irda.c,lib/ipx.c: cvs update
-+  * lib/nstrcmp.c: new, faster version, fixes b-lookups for ifconfig
-+  * hostanme.c: gcc 3.3 fix from cvs (not compiled in net-tools.deb)
-+  * lib/interface: fixed memory globbering
-+    (Closes: #135744, #149579, #185187)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu, 12 Jun 2003 05:44:38 +0200
-+
-+net-tools (1.60-6) unstable; urgency=low
-+
-+  * took route.c from upstream cvs: allow -6 and -4 option
-+  * took statistics.c from upstream cvs: more complete netstat -S
-+  * took README from upstream cvs: fix COPYING file title and removed
-+    the line (Closes: #102139)
-+  * took arp.c from upstream: fixed name "PUB", better not found handling,
-+    implicite proxy arp mac changed from '*' to '<from_interface>',
-+    usage line made shorter
-+  * added mii-tool in control file (Closes: #172473)
-+  * fixed description of binary multiple in man page (Closes: #182487)
-+  * fixed interpunctation in netstat(8) (Closes: #191660)
-+  * fixed compile warning in inet_sr.c by removing empty default: label in
-+    switch
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Wed, 28 May 2003 22:35:12 +0200
-+
-+net-tools (1.60-5) unstable; urgency=low
-+
-+  * thanks Andrew for the 4.1 NMU
-+  * NMU: Apply nameif patch from Matt Domsch. (Closes: #178209)
-+  * Fix FTB bug (string concatenation in gcc 3.3) (Closes: #194995)
-+  * Fix segfault in mii-tool by using cvs version (Closes: #139027)
-+  * fixed plural of authors to make lintian happy (I JOIN YOU :)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Wed, 28 May 2003 22:04:14 +0200
-+
-+net-tools (1.60-4.1) unstable; urgency=low
-+
-+  * NMU
-+  * Apply nameif patch from Matt Domsch. (Closes: #178209)
-+
-+ -- Andrew Suffield <asuffield@debian.org>  Wed,  9 Apr 2003 21:44:09 +0100
-+
-+net-tools (1.60-4) unstable; urgency=medium
-+
-+  * fixed (upstream) spurious newline in ifconfig
-+    Thanks Jonathen, Closes: Bug #109379
-+  * fixed SI-Units printout in ifconfig (Closes: Bug #110629, #97029, #100167)
-+  * this is done by including lib/interfaces.c from upstream cvs
-+  * also added ifconfig man page from upstream cvs
-+  * fixed (upstream) man page about netstat's --interface opt. (Closes: Bug#120475)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 24 Nov 2001 06:26:37 +0100
-+
-+net-tools (1.60-3) unstable; urgency=medium
-+
-+  * fixed upstream error where counters in ifconfig/netstat -i are 0
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 10 Nov 2001 18:12:13 +0100
-+
-+net-tools (1.60-2) unstable; urgency=low
-+
-+  * Fixed the following bug: (Closes: #117837)
-+  * inserted ifconfig.c from upstream cvs to do this
-+  * bumped debian Standard 3.1.1 -> 3.5.6 and removed -g from linking
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Thu,  1 Nov 2001 02:51:33 +0100
-+
-+net-tools (1.60-1) unstable; urgency=low
-+
-+  * New upstream
-+  * Phil fixed the following Bugs upstream: (Closes: #91919, #93048, #90282)
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 16 Apr 2001 02:28:12 +0200
-+
-+net-tools (1.59-1) unstable; urgency=low
-+
-+  * added Build Dependencies (closes bug: #89083)
-+  * new upstream version
-+  * removed dh_suidregister and a few comments from rules file
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sun, 18 Mar 2001 03:00:33 +0100
-+
-+net-tools (1.58-2) unstable; urgency=low
-+
-+  * backported ifconfig change from 1.59 to avoid closing socket too early
-+    on some systems (depending on the protocols installed). 
-+    Closes Bug: #85688, #85743
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Tue, 13 Feb 2001 01:39:59 +0100
-+
-+net-tools (1.58-1) unstable; urgency=low
-+
-+  * new upstream version
-+  * removed local man pages for now (Closes: bug #83894)
-+  * install nameif in /sbin
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 10 Feb 2001 21:50:30 +0100
-+
-+net-tools (1.57-2) unstable; urgency=high
-+
-+  * rebuild, this is believed to closes: #75825
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Sat, 30 Dec 2000 22:43:01 +0100
-+
-+net-tools (1.57-1) unstable; urgency=low
-+
-+  * new debian maintainer (thanks Anthony for the Work!)
-+  * new upstream version
-+
-+ -- Bernd Eckenfels <ecki@debian.org>  Mon, 14 Aug 2000 02:40:13 +0200
-+
-+net-tools (1.54-3) unstable; urgency=low
-+
-+  * Argggh. Don't use that horrible dh_installmanpages hack. (Closes:
-+    Bug#68925, Bug#68879)
-+
-+ -- Anthony Towns <ajt@debian.org>  Sun, 13 Aug 2000 00:12:05 +1000
-+
-+net-tools (1.54-2) unstable; urgency=low
-+
-+  * Reapply slattach patch from netbase 3.16-3.
-+
-+ -- Anthony Towns <ajt@debian.org>  Thu, 10 Aug 2000 11:32:58 +1000
-+
-+net-tools (1.54-1) unstable; urgency=low
-+
-+  * Split from netbase.
-+
-+ -- Anthony Towns <ajt@debian.org>  Mon, 17 Jul 2000 07:34:12 +1000
-+
-+Local variables:
-+mode: debian-changelog
-+End:
---- net-tools-1.60.orig/debian/watch
-+++ net-tools-1.60/debian/watch
-@@ -0,0 +1,3 @@
-+version=3
-+
-+http://download.berlios.de/net-tools/net-tools-(\d.*)\.tar\.(?:bz2|gz)
---- net-tools-1.60.orig/debian/patches/CVS-20081003-config.in_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20081003-config.in_sync.patch
-@@ -0,0 +1,74 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.24 - Fri Oct 3 02:09:57 2008 UTC by ecki
-+moved H suport for Infiniband to the right section
-+
-+Revision 1.23 - Fri Oct 3 01:55:07 2008 UTC by ecki
-+Add hardware support for InfiniBand (Debian Bug #294252 Tom Duffy from Sun).
-+
-+Revision 1.22 - Fri Jun 4 00:06:50 2004 UTC by ecki
-+default all options which work with recent systems  to on
-+
-+Revision 1.21 - Mon Nov 12 02:12:05 2001 UTC by ecki
-+added EUI64 Hardware Address Family
-+Daniel Stodden <stodden@in.tum.de>
-+
-+Index: net-tools/config.in
-+===================================================================
-+--- net-tools.orig/config.in
-++++ net-tools/config.in
-+@@ -49,16 +49,16 @@ bool 'Does your system support GNU gette
-+ * 
-+ bool 'UNIX protocol family' HAVE_AFUNIX y
-+ bool 'INET (TCP/IP) protocol family' HAVE_AFINET y
-+-bool 'INET6 (IPv6) protocol family' HAVE_AFINET6 n
-++bool 'INET6 (IPv6) protocol family' HAVE_AFINET6 y
-+ bool 'Novell IPX/SPX protocol family' HAVE_AFIPX y
-+ bool 'Appletalk DDP protocol family' HAVE_AFATALK y
-+ bool 'AX25 (packet radio) protocol family' HAVE_AFAX25 y
-+ bool 'NET/ROM (packet radio) protocol family' HAVE_AFNETROM y
-+-bool 'Rose (packet radio) protocol family' HAVE_AFROSE n
-++bool 'Rose (packet radio) protocol family' HAVE_AFROSE y
-+ bool 'X.25 (CCITT) protocol family' HAVE_AFX25 y
-+-bool 'Econet protocol family' HAVE_AFECONET n
-++bool 'Econet protocol family' HAVE_AFECONET y
-+ bool 'DECnet protocol family' HAVE_AFDECnet n
-+-bool 'Ash protocol family' HAVE_AFASH n
-++bool 'Ash protocol family' HAVE_AFASH y
-+ *
-+ *
-+ *            Device Hardware types.
-+@@ -71,21 +71,23 @@ bool 'IPIP Tunnel support' HAVE_HWTUNNEL
-+ bool 'STRIP (Metricom radio) support' HAVE_HWSTRIP y
-+ bool 'Token ring (generic) support' HAVE_HWTR y
-+ bool 'AX25 (packet radio) support' HAVE_HWAX25 y
-+-bool 'Rose (packet radio) support' HAVE_HWROSE n
-++bool 'Rose (packet radio) support' HAVE_HWROSE y
-+ bool 'NET/ROM (packet radio) support' HAVE_HWNETROM y
-+ bool 'X.25 (generic) support' HAVE_HWX25 y
-+ bool 'DLCI/FRAD (frame relay) support' HAVE_HWFR y
-+-bool 'SIT (IPv6-in-IPv4) support' HAVE_HWSIT n
-+-bool 'FDDI (generic) support' HAVE_HWFDDI n
-+-bool 'HIPPI (generic) support' HAVE_HWHIPPI n
-+-bool 'Ash hardware support' HAVE_HWASH n
-+-bool '(Cisco)-HDLC/LAPB support' HAVE_HWHDLCLAPB n
-++bool 'SIT (IPv6-in-IPv4) support' HAVE_HWSIT y
-++bool 'FDDI (generic) support' HAVE_HWFDDI y
-++bool 'HIPPI (generic) support' HAVE_HWHIPPI y
-++bool 'Ash hardware support' HAVE_HWASH y
-++bool '(Cisco)-HDLC/LAPB support' HAVE_HWHDLCLAPB y
-+ bool 'IrDA support' HAVE_HWIRDA y
-+-bool 'Econet hardware support' HAVE_HWEC n
-++bool 'Econet hardware support' HAVE_HWEC y
-++bool 'Generic EUI-64 hardware support' HAVE_HWEUI64 y
-++bool 'InfiniBand hardware support' HAVE_HWIB y
-+ *
-+ *
-+ *           Other Features.
-+ *
-+-bool 'IP Masquerading support' HAVE_FW_MASQUERADE n
-+-bool 'Build iptunnel and ipmaddr' HAVE_IP_TOOLS n
-+-bool 'Build mii-tool' HAVE_MII n
-++bool 'IP Masquerading support' HAVE_FW_MASQUERADE y
-++bool 'Build iptunnel and ipmaddr' HAVE_IP_TOOLS y
-++bool 'Build mii-tool' HAVE_MII y
---- net-tools-1.60.orig/debian/patches/local-manpages.patch
-+++ net-tools-1.60/debian/patches/local-manpages.patch
-@@ -0,0 +1,1759 @@
-+Formatting fixes to manpages, not found upstream.
-+
-+Index: net-tools/man/de_DE/arp.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/arp.8
-++++ net-tools/man/de_DE/arp.8
-+@@ -1,12 +1,12 @@
-+-.TH ARP 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH ARP 8 "6. M\(:arz 1999" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ .SH NAME
-+ arp \- Manipulation des ARP-Caches
-+ .SH SYNOPSIS
-+ .B arp 
-+ .RB [ \-vn ] 
-+ .RB [ "\-H Typ" ] 
-+-.RB [ "-i Schnittstelle" ] 
-+-.B -a 
-++.RB [ "\-i Schnittstelle" ] 
-++.B \-a 
-+ .RB [ Rechnername ]
-+ .PP
-+ .B arp 
-+@@ -19,14 +19,14 @@ arp \- Manipulation des ARP-Caches
-+ .RB [ \-v ] 
-+ .RB [ "\-H Typ" ] 
-+ .RB [ "\-i Schnittstelle" ] 
-+-.B -s Rechnername hw_adr
-++.B \-s Rechnername hw_adr
-+ .RB [ temp ] 
-+ .PP
-+ .B arp 
-+ .RB [ \-v ] 
-+ .RB [ "\-H Typ" ] 
-+ .RB [ "\-i Interface" ] 
-+-.B -s Rechnername hw_adr
-++.B \-s Rechnername hw_adr
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+@@ -34,15 +34,15 @@ arp \- Manipulation des ARP-Caches
-+ .RB [ \-v ] 
-+ .RB [ "\-H Typ" ] 
-+ .RB [ "\-i Schnittstelle" ] 
-+-.B -Ds Rechnername ifa
-++.B \-Ds Rechnername ifa
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+ .B arp 
-+ .RB [ \-vnD ]
-+ .RB [ "\-H Typ" ] 
-+-.RB [ "-i Schnittstelle" ]
-+-.B -f [Dateiname]
-++.RB [ "\-i Schnittstelle" ]
-++.B \-f [Dateiname]
-+ 
-+ .SH BESCHREIBUNG
-+ .B Arp
-+@@ -61,7 +61,7 @@ Ausf\(:uhrlichere Ausgaben.
-+ macht numerische Adressausgaben anstatt zu versuche, den symbolischen Rechner-,
-+ Port- oder Benutzernamen zu ermitteln.
-+ .TP
-+-.B "\-H type, \-\-hw-type type"
-++.B "\-H type, \-\-hw\-type type"
-+ Beim Setzen oder Auslesen des ARP-Caches schr\(:ankt diese Option
-+ ein, auf welcher Klasse von Eintr\(:agen 
-+ .B arp
-+@@ -86,7 +86,7 @@ Argument verwendet, so werden alle Eintr
-+ Alle Eintr\(:age f\(:ur den angegebenen Host entfernen.  Dies kann z.B.
-+ benutzt werden, wenn ein System angehalten wird.
-+ .TP
-+-.B "\-D, \-\-use-device"
-++.B "\-D, \-\-use\-device"
-+ Die Hardwareadresse der Netzwerksschnittstelle
-+ .B ifa
-+ verwenden.
-+@@ -180,6 +180,6 @@ Flagge.
-+ ethers(5), rarp(8), route(8), ifconfig(8), netstat(8)
-+ .SH AUTOREN
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> mit vielen Verbesserungen vom
-+-Verwalter der Net-Tools Bernd Eckenfels <net-tools@lina.inka.de>.
-++Verwalter der Net-Tools Bernd Eckenfels <net\-tools@lina.inka.de>.
-+ .SH \(:Ubersetzung
-+ Ralf B\(:achle <ralf@gnu.org>
-+Index: net-tools/man/de_DE/hostname.1
-+===================================================================
-+--- net-tools.orig/man/de_DE/hostname.1
-++++ net-tools/man/de_DE/hostname.1
-+@@ -3,7 +3,7 @@
-+ .\"
-+ .\" German translation by Ralf Baechle (ralf@gnu.org)
-+ .\"
-+-.TH HOSTNAME 1 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH HOSTNAME 1 "6. M\(:arz 1999" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ 
-+ .SH NAME
-+ hostname \- den Rechnernamen anzeigen oder setzen.
-+@@ -28,7 +28,7 @@ nodename \- den DECnet-Knotennamen anzei
-+ .RB [ \-f ]
-+ .RB [ \-\-fqdn ]
-+ .RB [ \-i ]
-+-.RB [ \-\-ip-address ]
-++.RB [ \-\-ip\-address ]
-+ .RB [ \-\-long ]
-+ .RB [ \-s ]
-+ .RB [ \-\-short ]
-+@@ -195,7 +195,7 @@ ge\(:andert werden.
-+ .I "\-h, \-\-help"
-+ Kurzanleitung ausdrucken und beenden.
-+ .TP
-+-.I "\-i, \-\-ip-address"
-++.I "\-i, \-\-ip\-address"
-+ Die IP-Adresse(n) des Rechners anzeigen und beenden.
-+ .TP
-+ .I "\-n, \-\-node"
-+@@ -220,9 +220,9 @@ Option gegeben wird, dann kann Root auch
-+ .SH DATEIEN
-+ .B /etc/hosts
-+ .SH AUTOREN
-+-Peter Tobias, <tobias@et-inf.fho-emden.de>
-++Peter Tobias, <tobias@et\-inf.fho\-emden.de>
-+ .br
-+-Bernd Eckenfels, <net-tools@lina.inka.de> (NIS and manpage).
-++Bernd Eckenfels, <net\-tools@lina.inka.de> (NIS and manpage).
-+ .br
-+ Steve Whitehouse, <SteveW@ACM.org> (DECnet support and manpage).
-+ .SH \(:Ubersetzung
-+Index: net-tools/man/de_DE/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/ifconfig.8
-++++ net-tools/man/de_DE/ifconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH IFCONFIG 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH IFCONFIG 8 "2007-12-02" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ .SH NAME
-+ ifconfig \- Konfiguration einer Netzwerkskarte
-+ .SH SYNOPSIS
-+@@ -19,7 +19,7 @@ Wird ein einzelne
-+ .BR Schnittstelle nargument
-+ angegeben, so zeigt es nur den Zustand der angegebenen Netzwerksschnittstelle
-+ an.  Wird ein einzelne
-+-.B -a
-++.B \-a
-+ Option angegeben, zeigt es den Zustand aller Schnittstellen an, selbst wenn
-+ diese inaktiviert sind.  Ansonsten konfiguriert
-+ .B ifconfig
-+@@ -130,13 +130,13 @@ sind
-+ kann benutzt werden, damit der Treiber automatischen den Typ des Mediums
-+ erkennt.  Wiederum unterst\(:utzen dies nicht alle Treiber.
-+ .TP
-+-.B "[-]broadcast [Adr]"
-++.B "[\-]broadcast [Adr]"
-+ Wird das Adressargument gegeben, so wird die Protokolladresse f\(:ur Broadcast
-+ f\(:ur diese Schnittstelle gesetzt.  Ansonsten wird die
-+ .B IFF_BROADCAST
-+ Flagge f\(:ur diese Schnittstelle gesetzt bzw. gel\(:oscht.
-+ .TP
-+-.B "[-]pointopoint [Adr]"
-++.B "[\-]pointopoint [Adr]"
-+ Dieses Schl\(:usselwort aktiviert den
-+ .B Punkt-zu-Punkt
-+ Modus einer Schnittstelle.  Das bedeutet, da\(ss eine Verbindung zwischen zwei
-+@@ -193,7 +193,7 @@ Kommando gemacht werden.
-+ W\(:ahrend AppleTalk DDP und IPX Adressen angezeigt werden, k\(:onnen sie mit
-+ diesem Kommando nicht ge\(:andert werden.
-+ .SH SIEHE AUCH
-+-route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-++route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
-+ .SH AUTOREN
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+ .br
-+Index: net-tools/man/de_DE/netstat.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/netstat.8
-++++ net-tools/man/de_DE/netstat.8
-+@@ -9,7 +9,7 @@
-+ .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "2007-12-02" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH NETSTAT 8 "2007-12-02" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ 
-+ .SH NAME
-+ netstat \- Anzeige von Netzwerksverbindungen, Routentabellen, Schnittstellenstatistiken, maskierten Verbindungen, Netlink-Nachrichten und Mitgliedschaft in Multicastgruppen
-+@@ -76,17 +76,17 @@ Ohne Optionen zeigt
-+ den Zustand von offenen Sockets an.  Wird keine Adressfamilie angegeben, dann
-+ werden die offenen Sockets aller konfigurierten Adressfamilien gedruckt.
-+ Die Option
-+-.B -e
-++.B \-e
-+ gibt zus\(:atzliche Informationen aus (User ID).  Mit der Option
-+-.B -v
-++.B \-v
-+ gibt
-+ .B netstat
-+ zus\(:atzlich Fehlermeldungen \(:uber von Kernel nicht unterst\(:utzte
-+ Adressfamilien aus.  Die Option
-+-.B -p
-++.B \-p
-+ gibt zus\(:atzlich die PID und den Namen des Programms, das den Socket
-+ ge\(:offnet hat, aus.
-+-.B -a
-++.B \-a
-+ druckt alle Sockets einschlie\(sslich der auf Verbinungen wartenden
-+ Serversockets aus.  Die Adressfamilie
-+ .B inet
-+@@ -96,9 +96,9 @@ zeigt RAW, UDP und TCP Sockets an.
-+ Die
-+ .BR \-r ", " \-\-route
-+ Option gibt die Routentabellen des Kernels im gleichen Format wie
-+-.B "route -e" 
-++.B "route \-e" 
-+ aus.
-+-.B "netstat -er" 
-++.B "netstat \-er" 
-+ benutzt das Ausgabeformat von
-+ .BR route .
-+ Wegen Details siehe
-+@@ -106,18 +106,18 @@ Wegen Details siehe
-+ 
-+ .SS "\-i, \-\-interfaces"
-+ Wird die
-+-.BR -i ", " --interfaces
-++.BR \-i ", " \-\-interfaces
-+ Option verwendet,  so wird eine Tabelle aller Schnittstellen
-+ ausgedruckt.  Die Ausgabe ist im Format von
-+-.B "ifconfig -e"
-++.B "ifconfig \-e"
-+ und wird in
-+ .BR ifconfig (8)
-+ beschrieben.
-+-.B "netstat -ei" 
-++.B "netstat \-ei" 
-+ druckt eine Tabelle f\(:ur Interfaces wie
-+ .BR ifconfig .
-+ Die
-+-.B -a
-++.B \-a
-+ Option schlie\(sst Schnittstellen, die gar nicht konfiguriert sind in die
-+ Ausgabe ein, d.h. die die
-+ .BR U = UP
-+@@ -126,7 +126,7 @@ Flagge nicht gesetzt haben).
-+ .SS "\-M, \-\-masquerade"
-+ 
-+ Eine Liste aller maskierten Sitzungen wird dargestellt.  Der
-+-.B -e 
-++.B \-e 
-+ Schalter schlie\(sst zus\(:atzlich Information \(:uber Sequenznummern und
-+ Deltas, die durch das Umschreiben von FTP-Sitzungen (PORT Kommando) verursacht
-+ werden.  Maskieren wird dazu verwendet um Maschinen mit inoffiziellen
-+@@ -196,24 +196,24 @@ im Sekundenabstand die Ausgabe, bis es a
-+ .SS "Proto" 
-+ Das von Socket verwendete Protokoll (TCP, UDP, RAW).
-+ 
-+-.SS "Recv-Q"
-++.SS "Recv\-Q"
-+ Die Anzahl von Bytes, die noch nicht von der Anwendung vom Socket abgeholt
-+ wurden.
-+ 
-+-.SS "Send-Q"
-++.SS "Send\-Q"
-+ Die Anzahl von Bytes, die von der Gegenseite noch nicht best\(:atigt wurde.
-+ 
-+ .SS "Lokale Adresse" 
-+ Die lokale Adresse (lokaler Rechnername) und Portnummer des Sockets.  Au\(sser
-+ bei Verwendung der
-+-.B -n
-++.B \-n
-+ Option wird die Socketadresse nach dem kanonischen Rechnernamen und die
-+ Portnummer in den zugeh\(:origen Dienstenamen aufgel\(sst.
-+ 
-+ .SS "Gegenadresse"
-+ Die Adresse und Portnummer der Gegenseite des Sockets.  Wie bei lokalen
-+ Adressen schaltet der
-+-.B -n
-++.B \-n
-+ Schalter die Umwandlung von Rechneradresse und Portnummer ab.
-+ 
-+ .SS "State"
-+@@ -267,7 +267,7 @@ Der Socket wartet auf eingehende Verbind
-+ angezeit, wenn die
-+ The socket is listening for incoming connections. Those sockets are only
-+ displayed if the
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ Option gegeben wird.
-+ .TP
-+ .I
-+@@ -285,7 +285,7 @@ Der Name oder die Benutzer-ID des Eigent
-+ .SS "PID/Program name"
-+ Durch einen Schr\(:agstrich abgetrenntes Paar von Prozess-ID und Programmname
-+ des Programms, das diesen Socket besitzt.  Die Option
-+-.B -p
-++.B \-p
-+ schaltet die Anzeige dieser Spalte ein.  Es werden
-+ .B root
-+ Privilegien ben\(:otigt um die n\(:otigen Daten zu erhalten.  F\(:ur IPX
-+@@ -359,7 +359,7 @@ Der Socket ist unbenutzt
-+ H\(:Ort
-+ Der Socket lauscht nach Verbindungsanfragen.  Diese Sockets werden nur
-+ angezeigt, wenn die
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ Option gesetzt ist.
-+ .TP
-+ .I
-+@@ -411,7 +411,7 @@ werden.)
-+ 
-+ .PP
-+ .SH BEMERKUNGEN
-+-Seit der Kern Version 2.2 zeigt netstat -i keine Schnittstellenstatistiken
-++Seit der Kern Version 2.2 zeigt netstat \-i keine Schnittstellenstatistiken
-+ von Schnittstellenaliasen mehr an.  Um Statistiken per Schnittstelle zur
-+ erhalten, m\(:ussen jetzt mit dem
-+ .BR ipchains(8) 
-+@@ -489,14 +489,14 @@ so kann unsinnige Information ausgegeben
-+ unwahrscheinlich.
-+ .br
-+ Die
-+-.B netstat -i
-++.B netstat \-i
-+ die beschrieben wird sollte nach einigem S\(:aubern der BETA-Version des
-+ Codes des Net-Tools Packets funktionieren.
-+ 
-+ .PP
-+ .SH AUTOREN
-+ Die Benutzerschnittstelle wurde von Fred Baumgarten
-+-<dc6iq@insu1.etec.uni-karlsruhe.de> geschrieben, die Manpage zum gr\(:o\(ssten
-++<dc6iq@insu1.etec.uni\-karlsruhe.de> geschrieben, die Manpage zum gr\(:o\(ssten
-+ Teil von Matt Welsh <mdw@tc.cornell.edu>.  Sie wurde von Alan Cox
-+ <Alan.Cox@linux.org> aktualisiert, ben\(:otigt aber weitere Arbeit.
-+ .br
-+Index: net-tools/man/de_DE/plipconfig.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/plipconfig.8
-++++ net-tools/man/de_DE/plipconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH PLIPCONFIG 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH PLIPCONFIG 8 "6. M\(:arz 1999" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ .SH NAME
-+ plipconfig \- Einstellung von PLIP Schnittstellen-Parametern
-+ .SH SYNOPSIS
-+Index: net-tools/man/de_DE/rarp.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/rarp.8
-++++ net-tools/man/de_DE/rarp.8
-+@@ -1,14 +1,14 @@
-+-.TH RARP 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH RARP 8 "6. M\(:arz 1999" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ .SH NAME
-+ rarp \- Manipulation des RARP-Caches
-+ .SH SYNOPSIS
-+-.B "rarp [-V] [--version] [-h] [--help]"
-++.B "rarp [\-V] [\-\-version] [\-h] [\-\-help]"
-+ .br
-+-.B "rarp -a"
-++.B "rarp \-a"
-+ .br
-+-.B "rarp [-v] -d Rechnername ..."
-++.B "rarp [\-v] \-d Rechnername ..."
-+ .br
-+-.B "rarp [-v] [-t type] -s Rechnername hw_addr"
-++.B "rarp [\-v] [\-t type] \-s Rechnername hw_addr"
-+ .SH BESCHREIBUNG
-+ .B Rarp
-+ kann die RARP-Tabelle des Kernels auf verschiedene Arten manipulieren.  Die
-+Index: net-tools/man/de_DE/route.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/route.8
-++++ net-tools/man/de_DE/route.8
-+@@ -1,4 +1,4 @@
-+-.TH ROUTE 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH ROUTE 8 "2007-12-02" "net\-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ .SH NAME
-+ route \- Anzeigen der IP-Routen-Tabelle
-+ .SH SYNOPSIS
-+@@ -51,11 +51,11 @@ Schnittstelle]
-+ .RB [ \-V ] 
-+ .RB [ \-\-version ]
-+ .RB [ \-h ]
-+-.RB [ \--help ]
-++.RB [ \-\-help ]
-+ .SH BESCHREIBUNG
-+ .B Route
-+ wird zum \(:Andern der IP-Routing-Tabelle der Kernels verwendet.  Seine
-+-prim\(:are Verwendung ist statische Routen f\*:ur bestimmte Rechner oder
-++prim\(:are Verwendung ist statische Routen f\(:ur bestimmte Rechner oder
-+ Netzwerke \(:uber eine Schnittstelle einzutragen, nachdem diese mit dem
-+ Programm
-+ .BR ifconfig (8)
-+@@ -92,13 +92,13 @@ Das
-+ ist ein Netzwerk.
-+ 
-+ .TP
-+-.B -host
-++.B \-host
-+ daS
-+ .B Ziel
-+ ist ein Rechner
-+ 
-+ .TP 
-+-.B -F
-++.B \-F
-+ Zeit die FIB Routentabelle des Kerns an.  Das Ausgabeformat kann mit den
-+ Optionen
-+ .B \-e
-+@@ -107,7 +107,7 @@ and
-+ ge\(:andert werden.
-+ 
-+ .TP 
-+-.B -C
-++.B \-C
-+ zeigt den Routencache des Kernels an.
-+ 
-+ .TP
-+@@ -120,8 +120,8 @@ f\(:ugt eine Route zu.
-+ 
-+ .TP
-+ .B Ziel
-+-Das Zielnetzwerk oder -System.  Die Angabe von sowohl IP-Adressen in Form
-+-von dezimalen durch Punkt getrennten Quadrupeln als auch Rechner- und
-++Das Zielnetzwerk oder \(hySystem.  Die Angabe von sowohl IP-Adressen in Form
-++von dezimalen durch Punkt getrennten Quadrupeln als auch Rechner\(hy und
-+ Netznamen ist zul\(:assig.
-+ 
-+ .TP
-+@@ -130,7 +130,7 @@ Netznamen ist zul\(:assig.
-+ 
-+ .TP
-+ .B gw Router
-+-Alle IP-Pakete f\(:ur das Zielnetzwerk / -System werden zum angegebenen
-++Alle IP-Pakete f\(:ur das Zielnetzwerk / \(hySystem werden zum angegebenen
-+ Router weitergeleitet.
-+ 
-+ .B ANMERKUNG:
-+@@ -202,7 +202,7 @@ der Optionen (metric, netmask, gw und de
-+ 
-+ .SH BEISPIELE
-+ .TP
-+-.B route add -net 127.0.0.0
-++.B route add \-net 127.0.0.0
-+ erzeugt die normale Loopbackroute mit der Netzmaske 255.0.0.0 (Netzwerk Klasse
-+ A, ermittelt aus der Zieladresse) und assoziert sie mit der Schnittstelle lo
-+ unter der Annahme, da\(ss dieses Ger\(:at vorher mit
-+@@ -210,18 +210,18 @@ unter der Annahme, da\(ss dieses Ger\(:a
-+ konfiguriert wurde. 
-+ 
-+ .TP 
-+-.B route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
-++.B route add \-net 192.56.76.0 netmask 255.255.255.0 dev eth0
-+ Legt eine Route zum Netzwerk 192.56.76.x \(:uber eth0 an.  Die Angabe der
-+ Klasse C Netzmaske ist in diesem Fall nicht n\(:otig, 192.* Klasse C
-+ IP-Adressen sind.  Das Wort dev darf in diesem Fall ausgelassen werden.
-+ 
-+ .TP
-+-.B route add default gw mango-gw
-++.B route add default gw mango\-gw
-+ legt eine Standardroute, d.h. eine Route die verwendet wird, wenn keine andere
-+-Route passt, an.  Alle Pakete \(:uber diese Route werden \(:uber mango-gw
-++Route passt, an.  Alle Pakete \(:uber diese Route werden \(:uber mango\-gw
-+ weitergeleitet.  Die Schnittstelle, die tats\(:achlich f\(:ur diese Route
-+-verwendet wird, h\(:angt davon ab, wie mango-gw erreicht werden kann.  Zuvor
-+-mu\(ss mango-gw bereits \(:uber eine andere Route erreicht werden k\(:onnen.
-++verwendet wird, h\(:angt davon ab, wie mango\-gw erreicht werden kann.  Zuvor
-++mu\(ss mango\-gw bereits \(:uber eine andere Route erreicht werden k\(:onnen.
-+ 
-+ .TP
-+ .B route add ipx4 sl0
-+@@ -229,7 +229,7 @@ Legt eine Route zum Rechner ipx4 \(:uber
-+ wird angenommen da\(ss ipx4 der SLIP-Rechner auf der Gegenseite ist.
-+ 
-+ .TP
-+-.B route add -net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-++.B route add \-net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-+ Dieses Kommando sorgt daf\(:ur, dass das Netz 192.57.66.x \(:uber die
-+ obige Route \(:uber die SLIP-Schnittstelle weitergeleitet wird.
-+ 
-+@@ -250,7 +250,7 @@ Dies installiert eine zur\(:uckweisende 
-+ Die Ausgabe der Kernelroutentabelle besteht aus folgenden Spalten
-+ .TP
-+ .B Ziel
-+-Das Zielnetzwerk oder -System.
-++Das Zielnetzwerk oder \(hySystem.
-+ .TP
-+ .B Router
-+ Die Adresse des weiterleitenden Routers oder "*", wenn keine gesetzt ist.
-+@@ -296,10 +296,10 @@ von Routend\(:amonen ben\(:otigt werden.
-+ Anzahl der Referenzen auf diese Route.  Wird vom Linux Kern nicht benutzt.
-+ .TP
-+ .B Benutzer
-+-Zahl der Suchvorg\(:ange nach dieser Route.  Abh\(:angig von -F und -C
-+-werden entweder fehlgeschlagene Suchen im Cache (-F) oder Cache-Treffer (-C)
-+-Count of lookups for the route.  Depending on the use of -F and -C this will
-+-be either route cache misses (-F) or hits (-C).
-++Zahl der Suchvorg\(:ange nach dieser Route.  Abh\(:angig von \-F und \-C
-++werden entweder fehlgeschlagene Suchen im Cache (\-F) oder Cache-Treffer (\-C)
-++Count of lookups for the route.  Depending on the use of \-F and \-C this will
-++be either route cache misses (\-F) or hits (\-C).
-+ .TP
-+ .B Schnittstelle
-+ Schnittstelle auf die Pakete f\(:ur diese Route geleitet werden.
-+@@ -345,6 +345,6 @@ zugef\(:ugt.  Bernd Eckenfels hat schlie
-+ irtt beigesteuert und den Code mit dem von Netstat vereinigt.
-+ .SH AUTOREN
-+ .B Route
-+-wird zur Zeit von Phil Blundel (Philip.Blundell@pobox.com) gewartet.
-++wird zur Zeit von Phil Blundel <Philip.Blundell@pobox.com> und Bernd Eckenfels <net-tools@lina.inka.de> gewartet.
-+ .SH \(:Ubersetzung
-+ Ralf B\(:achle <ralf@gnu.org>
-+Index: net-tools/man/de_DE/slattach.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/slattach.8
-++++ net-tools/man/de_DE/slattach.8
-+@@ -1,8 +1,8 @@
-+-.TH SLATTACH 8 "6. M\(:arz 1999" "net-tools" "slattach"
-++.TH SLATTACH 8 "6. M\(:arz 1999" "net\-tools" "slattach"
-+ .SH NAME
-+ slattach \- Anbindung einer Netzwerksschnittstelle an eine serielle Verbindung
-+ .SH SYNOPSIS
-+-.B "slattach [-dehlLmnqv] [-c Kommando] [-p Protokoll] [-s Geschwindigkeit]
-++.B "slattach [\-dehlLmnqv] [\-c Kommando] [\-p Protokoll] [\-s Geschwindigkeit]
-+ [Terminal]"
-+ .br
-+ .SH BESCHREIBUNG
-+@@ -12,46 +12,46 @@ Reihe von m\(:oglichen Netzwerksmodi umz
-+ m\(:oglich, es zur Verbindung mit anderen Computern zu verwenden.
-+ .SH OPTIONEN
-+ .TP
-+-.B "[-c Kommando]"
-++.B "[\-c Kommando]"
-+ Den Befehl
-+ .B Kommando
-+ beim Auflegen der Verbindung ausf\(:uhren.  Die kann benutzt werden um
-+ Skripte laufen zu lassen oder eine Verbindung nach Abbruch wiederaufzubauen.
-+ .TP
-+-.B "[-d]"
-++.B "[\-d]"
-+ Zus\(:atzliche Ausgaben zur Fehlersuche einschalten.  N\(:utzlich, wenn
-+ eine Konfiguration nicht arbeitet.
-+ .TP
-+-.B "[-h]"
-++.B "[\-h]"
-+ Beenden, wenn der Tr\(:ager verloren geht.  Dies funktioniert sowohl auf
-+ /dev/tty als auch auf /dev/cua Ger\(:aten dadurch, da\(ss der Tr\(:ager
-+ alle 15 Sekunden \(:uberpr\(:uft wird.
-+-.B "[-v]"
-++.B "[\-v]"
-+ Ausf\(:uhrliche Ausgaben.  Die ist n\(:utzlich in Shellskripten.
-+ .TP
-+-.B "[-q]"
-++.B "[\-q]"
-+ Schaltet alle Ausgaben aus.
-+ .TP
-+-.B "[-l]"
-++.B "[\-l]"
-+ Erzeugt eine Sperrdatei in /var/lock \(:ahnlich wie UUCP.
-+ .TP
-+-.B "[-n]"
-++.B "[\-n]"
-+ Equivalent mit dem
-+ .B mesg n
-+ Befehl.
-+ .TP
-+-.B "[-m]"
-++.B "[\-m]"
-+ Versetzt \fBnot\fP die Verbindung in den 8-bit raw-Modus.
-+ .TP
-+-.B "[-e]"
-++.B "[\-e]"
-+ Beenden sofort nach der Initialisierung des Ger\(:ats anstelle darauf zu
-+ warten, da\(ss die Leitung aufgelegt wird.
-+ .TP
-+-.B "[-L]"
-++.B "[\-L]"
-+ Aktiviert 3-Draht-Betrieb.  Das Terminal wird in die CLOCAL Betriebsart
-+ geschaltet und der Tr\(:ager wird nicht \(:uberwacht.
-+ .TP
-+-.B "[-p Protokoll]"
-++.B "[\-p Protokoll]"
-+ Setzt ein spezifisches Protkoll um eine Leitung zu benutzen.  Die
-+ Voreinstellung ist
-+ .BR cslip ,
-+@@ -79,7 +79,7 @@ Verbindungen sollte stattdessen das
-+ .B axattach
-+ Programm verwendet werden.
-+ .TP
-+-.B "[-s Geschwindigkeit]"
-++.B "[\-s Geschwindigkeit]"
-+ Setzt eine von der Voreinstellung abweichende \(:Ubertragungseschwindigkeit.
-+ .PP
-+ Werden keine Argument gegeben, sie wird das aktuelle Terminal, das ist
-+Index: net-tools/man/en_US/arp.8
-+===================================================================
-+--- net-tools.orig/man/en_US/arp.8
-++++ net-tools/man/en_US/arp.8
-+@@ -1,4 +1,4 @@
-+-.TH ARP 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH ARP 8 "2007-12-01" "net\-tools" "Linux Programmer's Manual"
-+ .SH NAME
-+ arp \- manipulate the system ARP cache
-+ .SH SYNOPSIS
-+@@ -167,8 +167,8 @@ used with 2.4 and newer kernels.
-+ Similar to the
-+ .B \-s
-+ option, only this time the address info is taken from file
-+-.B filename
-+-.  This can be used if ARP entries for a lot of hosts have to be
-++.B filename.
-++This can be used if ARP entries for a lot of hosts have to be
-+ set up.  The name of the data file is very often
-+ .IR /etc/ethers , 
-+ but this is not official. If no filename is specified /etc/ethers
-+@@ -196,7 +196,7 @@ flag. Permanent entries are marked with
-+ and published entries have the
-+ .B P
-+ flag.
-+-.SH EXAMPLES
-++.SH EXSAMPLES
-+ .B /usr/sbin/arp -i eth0 -Ds 10.0.0.2 eth1 pub
-+ 
-+ This will answer ARP requests for 10.0.0.2 on eth0 with the MAC address for
-+Index: net-tools/man/en_US/ethers.5
-+===================================================================
-+--- net-tools.orig/man/en_US/ethers.5
-++++ net-tools/man/en_US/ethers.5
-+@@ -1,4 +1,4 @@
-+-.TH ETHERS 5 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH ETHERS 5 "May 15th, 2005" "" "File formats"
-+ .SH NAME \"{{{roff}}}\"{{{
-+ ethers \- Ethernet address to IP number database
-+ .\"}}}
-+@@ -7,17 +7,17 @@ ethers \- Ethernet address to IP number 
-+ IP numbers, one line for each IP number:
-+ .sp
-+ .RS
-+-\fIEthernet\-address\fP  \fIIP\-number\fP
-++\fIEthernet-address\fP  \fIIP-number\fP
-+ .RE
-+ .sp
-+ The two items are separated by any number of SPACE and/or TAB characters.
-+ A \fB#\fP at the beginning of a line starts a comment
-+-which extends to the end of the line.  The \fIEthernet\-address\fP is
-++which extends to the end of the line.  The \fIEthernet-address\fP is
-+ written as
-+ .IR x : x : x : x : x : x ,
-+ where \fIx\fP is a hexadecimal number between \fB0\fP and \fBff\fP
-+ which represents one byte of the address, which is in network byte
-+-order (big-endian).  The \fIIP\-number\fP may be a hostname which
-++order (big-endian).  The \fIIP-number\fP may be a hostname which
-+ can be resolved by DNS or a dot separated number.
-+ .\"}}}
-+ .SH EXAMPLES \"{{{
-+Index: net-tools/man/en_US/hostname.1
-+===================================================================
-+--- net-tools.orig/man/en_US/hostname.1
-++++ net-tools/man/en_US/hostname.1
-+@@ -1,4 +1,4 @@
-+-.TH HOSTNAME 1 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH HOSTNAME 1 "28 Jan 1996" "net\-tools" "Linux Programmer's Manual"
-+ 
-+ .SH NAME
-+ hostname \- show or set the system's host name
-+Index: net-tools/man/en_US/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/en_US/ifconfig.8
-++++ net-tools/man/en_US/ifconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH IFCONFIG 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH IFCONFIG 8 "2007-12-02" "net\-tools" "Linux Programmer's Manual"
-+ .SH NAME
-+ ifconfig \- configure a network interface
-+ .SH SYNOPSIS
-+@@ -45,7 +45,7 @@ supported address families include
-+ display all interfaces which are currently available, even if down
-+ .TP
-+ .B -s
-+-display a short list (like netstat -i)
-++display a short list (like netstat \-i)
-+ .TP
-+ .B -v
-+ be more verbose for some error conditions
-+Index: net-tools/man/en_US/mii-tool.8
-+===================================================================
-+--- net-tools.orig/man/en_US/mii-tool.8
-++++ net-tools/man/en_US/mii-tool.8
-+@@ -1,7 +1,7 @@
-+ .\" Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
-+ .\" mii-tool.8 1.5 2000/04/25 22:58:19
-+ .\"
-+-.TH MII\-TOOL 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH MII\-TOOL 8 "2004/03/28 23:30:00" "net\-tools"
-+ 
-+ .SH NAME
-+ mii\-tool \- view, manipulate media-independent interface status
-+Index: net-tools/man/en_US/nameif.8
-+===================================================================
-+--- net-tools.orig/man/en_US/nameif.8
-++++ net-tools/man/en_US/nameif.8
-+@@ -1,4 +1,4 @@
-+-.TH NAMEIF 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH NAMEIF 8 "18 Oct 2000" "net\-tools" "Linux's Administrator's Manual"
-+ .SH NAME
-+ nameif \- name network interfaces based on MAC addresses
-+ .SH SYNOPSIS
-+Index: net-tools/man/en_US/netstat.8
-+===================================================================
-+--- net-tools.orig/man/en_US/netstat.8
-++++ net-tools/man/en_US/netstat.8
-+@@ -23,7 +23,7 @@ netstat \- Print network connections, ro
-+ .RB [ \-\-listening | \-l ]
-+ .RB [ \-\-all | \-a ]
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric\-hosts "] [" \-\-numeric\-ports "] [" \-\-numeric\-users ]
-++.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric\-users ]
-+ .RB [ \-\-symbolic | \-N ]
-+ .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
-+ .RB [ \-\-timers | \-o ]
-+@@ -186,11 +186,9 @@ Print routing information from the route
-+ .SS "Proto" 
-+ The protocol (tcp, udp, raw) used by the socket. 
-+ .SS "Recv\-Q"
-+-Established: The count of bytes not copied by the user program connected to this socket.
-+-Listening: Since Kernel 2.6.18 this column contains the current syn backlog.
-++The count of bytes not copied by the user program connected to this socket.
-+ .SS "Send\-Q"
-+-Established: The count of bytes not acknowledged by the remote host.
-+-Listening: Since Kernel 2.6.18 this column contains the maximum size of the syn backlog.
-++The count of bytes not acknowledged by the remote host.
-+ .SS "Local Address" 
-+ Address and port number of the local end of the socket.  Unless the
-+ .BR \-\-numeric " (" \-n )
-+Index: net-tools/man/en_US/plipconfig.8
-+===================================================================
-+--- net-tools.orig/man/en_US/plipconfig.8
-++++ net-tools/man/en_US/plipconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH PLIPCONFIG 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH PLIPCONFIG 8 "17 February 1995" "" ""
-+ .SH NAME
-+ plipconfig \- fine tune PLIP device parameters 
-+ .SH SYNOPSIS
-+Index: net-tools/man/en_US/rarp.8
-+===================================================================
-+--- net-tools.orig/man/en_US/rarp.8
-++++ net-tools/man/en_US/rarp.8
-+@@ -1,4 +1,4 @@
-+-.TH RARP 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH RARP 8 "4 August 1997" "net\-tools" "Linux Programmer's Manual"
-+ .SH NAME
-+ rarp \- manipulate the system RARP table
-+ .SH SYNOPSIS
-+Index: net-tools/man/en_US/route.8
-+===================================================================
-+--- net-tools.orig/man/en_US/route.8
-++++ net-tools/man/en_US/route.8
-+@@ -1,4 +1,4 @@
-+-.TH ROUTE 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH ROUTE 8 "2007-12-02" "net\-tools" "Linux Programmer's Manual"
-+ .SH NAME
-+ route \- show / manipulate the IP routing table
-+ .SH SYNOPSIS
-+Index: net-tools/man/en_US/slattach.8
-+===================================================================
-+--- net-tools.orig/man/en_US/slattach.8
-++++ net-tools/man/en_US/slattach.8
-+@@ -1,4 +1,4 @@
-+-.TH SLATTACH 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH SLATTACH 8 "10 Oct 2006" "" ""
-+ .SH NAME
-+ slattach \- attach a network interface to a serial line
-+ .SH SYNOPSIS
-+Index: net-tools/man/fr_FR/arp.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/arp.8
-++++ net-tools/man/fr_FR/arp.8
-+@@ -1,12 +1,12 @@
-+-.TH ARP 8 "5 Jan 1999" "net-tools" "Linux Programmer's Manual"
-++.TH ARP 8 "5 Jan 1999" "net\-tools" "Linux Programmer's Manual"
-+ .SH NOM
-+ arp \- manipule la table ARP du système
-+ .SH SYNOPSIS
-+ .B arp 
-+ .RB [ \-vn ] 
-+ .RB [ "\-H type" ] 
-+-.RB [ "-i if" ] 
-+-.B -a 
-++.RB [ "\-i if" ] 
-++.B \-a 
-+ .RB [ nom_hôte ]
-+ .PP
-+ .B arp 
-+@@ -19,14 +19,14 @@ arp \- manipule la table ARP du système
-+ .RB [ \-v ] 
-+ .RB [ "\-H type" ] 
-+ .RB [ "\-i if" ] 
-+-.B -s nom_hôte hw_addr
-++.B \-s nom_hôte hw_addr
-+ .RB [ temp ] 
-+ .PP
-+ .B arp 
-+ .RB [ \-v ] 
-+ .RB [ "\-H type" ] 
-+ .RB [ "\-i if" ] 
-+-.B -s nom_hôte hw_addr
-++.B \-s nom_hôte hw_addr
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+@@ -34,15 +34,15 @@ arp \- manipule la table ARP du système
-+ .RB [ \-v ] 
-+ .RB [ "\-H type" ] 
-+ .RB [ "\-i if" ] 
-+-.B -Ds nom_hôte ifa
-++.B \-Ds nom_hôte ifa
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+ .B arp 
-+ .RB [ \-vnD ]
-+ .RB [ "\-H type" ] 
-+-.RB [ "-i if" ]
-+-.B -f nom_fichier
-++.RB [ "\-i if" ]
-++.B \-f nom_fichier
-+ 
-+ .SH DESCRIPTION
-+ .B Arp
-+@@ -61,7 +61,7 @@ Dit à l'utilisateur ce qui se passe en é
-+ Affiche les adresses numériques au lieu d'essayer de déterminer les nom
-+ d'hôtes symboliques.
-+ .TP
-+-.B "\-H type, \-\-hw-type type"
-++.B "\-H type, \-\-hw\-type type"
-+ En positionnant ou lisant les entrées ARP, ce paramètre optionnel indique
-+ à 
-+ .B arp
-+@@ -92,7 +92,7 @@ les entrées seront affichées.
-+ Enlève une entrée pour l'hôte spécifié.  Ceci peut être
-+ utilisé si l'hôte concerné ne fonctionne plus, par exemple.
-+ .TP
-+-.B "\-D, \-\-use-device"
-++.B "\-D, \-\-use\-device"
-+ Utilise l'adresse matérielle de l'interface
-+ .BR ifa
-+ .
-+@@ -178,7 +178,7 @@ et les entrées 'pub' ont l'indicateur
-+ rarp(8), route(8), ifconfig(8), netstat(8)
-+ .SH AUTEUR
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> avec les améliorations
-+-apportées par le mainteneur des net-tools Bernd Eckenfels
-+-<net-tools@lina.inka.de>.
-++apportées par le mainteneur des net\-tools Bernd Eckenfels
-++<net\-tools@lina.inka.de>.
-+ .SH TRADUCTION
-+ Jean Michel VANSTEENE (vanstee@worldnet.fr)
-+Index: net-tools/man/fr_FR/hostname.1
-+===================================================================
-+--- net-tools.orig/man/fr_FR/hostname.1
-++++ net-tools/man/fr_FR/hostname.1
-+@@ -1,4 +1,4 @@
-+-.TH HOSTNAME 1 "15 Mars 1999" "net-tools" "Linux Programmer's Manual"
-++.TH HOSTNAME 1 "15 Mars 1999" "net\-tools" "Linux Programmer's Manual"
-+ .SH NOM
-+ hostname \- affiche ou définit le nom d'hôte du système
-+ .br
-+@@ -22,7 +22,7 @@ nodename \- affiche ou définit le nom de
-+ .RB [ \-f ]
-+ .RB [ \-\-fqdn ]
-+ .RB [ \-i ]
-+-.RB [ \-\-ip-address ]
-++.RB [ \-\-ip\-address ]
-+ .RB [ \-\-long ]
-+ .RB [ \-s ]
-+ .RB [ \-\-short ]
-+@@ -177,7 +177,7 @@ le nom FQDN et le nom de domaine (qui fa
-+ .I "\-h, \-\-help"
-+ Affiche un message d'aide et se termine.
-+ .TP
-+-.I "\-i, \-\-ip-address"
-++.I "\-i, \-\-ip\-address"
-+ Affiche la (les) adresse(s) IP de l'hôte.
-+ .TP
-+ .I "\-n, \-\-node"
-+@@ -203,9 +203,9 @@ Affiche le nom de domaine NIS. Si un par
-+ .SH FICHIERS
-+ .B /etc/hosts
-+ .SH AUTEURS
-+-Peter Tobias, <tobias@et-inf.fho-emden.de>
-++Peter Tobias, <tobias@et\-inf.fho\-emden.de>
-+ .br
-+-Bernd Eckenfels, <net-tools@lina.inka.de> (NIS et pages de manuel).
-++Bernd Eckenfels, <net\-tools@lina.inka.de> (NIS et pages de manuel).
-+ .br
-+ Steve Whitehouse, <SteveW@ACM.org> (Support DECnet et pages de manuel).
-+ .SH TRADUCTION
-+Index: net-tools/man/fr_FR/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/ifconfig.8
-++++ net-tools/man/fr_FR/ifconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH IFCONFIG 8 "4 August 1997" "net-tools" "Linux Programmer's Manual"
-++.TH IFCONFIG 8 "2007-12-02" "net\-tools" "Linux Programmer's Manual"
-+ .SH NOM
-+ ifconfig \- configure une interface réseau
-+ .SH SYNOPSIS
-+@@ -20,7 +20,7 @@ seul le paramètre
-+ .B interface
-+ est donné, il affiche seulement l'état de l'interface correspondante;
-+ si seul le paramètre
-+-.B -a
-++.B \-a
-+ est fourni, il affiche l'état de toutes les interfaces, même celles qui
-+ ne sont pas actives.
-+ Autrement, il considère qu'il faut positionner de nouvelles valeurs.
-+@@ -128,14 +128,14 @@ permet d'indiquer au pilote de détecter 
-+ utilisé. Une fois de plus, tous les périphériques ne supportent pas cette
-+ option.
-+ .TP
-+-.B "[-]broadcast [adr]"
-++.B "[\-]broadcast [adr]"
-+ Si l'adresse est également donnée, définit l'adresse broadcast
-+ protocolaire pour cette interface. Autrement, il permet d'armer (ou désarmer)
-+ l'indicateur
-+ .B IFF_BROADCAST
-+ de l'interface.
-+ .TP
-+-.B "[-]pointopoint [adr]"
-++.B "[\-]pointopoint [adr]"
-+ Ce mot clé valide le mode
-+ .B point-à-point
-+ d'une interface, signifiant qu'il existe un lien direct entre 2 machines,
-+@@ -196,7 +196,7 @@ comptabilité particulières pour l'adress
-+ Même si les adresses appletalk DDP et IPX peuvent être affichées,
-+ elles ne peuvent être modifiées avec cette commande.
-+ .SH VOIR AUSSI
-+-route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-++route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
-+ .SH AUTHORS
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+ .br
-+Index: net-tools/man/fr_FR/netstat.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/netstat.8
-++++ net-tools/man/fr_FR/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
-++.TH NETSTAT 8 "2007-12-02" "net\-tools" "Linux Programmer's Manual"
-+ 
-+ .SH NAME
-+ netstat \- Affiche les connexions réseau, les tables de routage, les
-+@@ -76,17 +76,17 @@ ouvertes. C'est l'option par défaut : si
-+ d'adresses, les sockets actives de toutes les familles d'adresses seront
-+ affichées.
-+ Avec le paramètre
-+-.B -e
-++.B \-e
-+ vous obtenez quelques informations supplémentaires (userid). Avec le paramètre
-+-.B -v
-++.B \-v
-+ vous pouvez demander à netstat de signaler des familles d'adresses connues
-+ non supportées par le noyau. Le paramètre
-+-.B -o
-++.B \-o
-+ affiche des informations supplémentaires sur les timers réseau. En donnant
-+ le paramètre
-+-.B -p
-++.B \-p
-+ vous verrez le PID et le nom du processus à qui appartient la socket. Le paramètre
-+-.B -a
-++.B \-a
-+ affiche toutes les sockets, y compris les sockets d'écoute des serveurs. La famille
-+ d'adresses
-+ .B inet
-+@@ -97,9 +97,9 @@ Avec le paramètre
-+ .BR \-r ", " \-\-route
-+ vous pouvez visualiser les tables de routage dans le même format qu'avec la
-+ commande
-+-.B "route -e" 
-++.B "route \-e" 
-+ .
-+-.B "netstat -er" 
-++.B "netstat \-er" 
-+ utilisera le format de la commande
-+ .BR route .
-+ Veuillez consulter
-+@@ -108,19 +108,19 @@ pour plus de détails.
-+ 
-+ .SS "\-i, \-\-interfaces \fIiface\fI"
-+ Si vous utilisez l'option
-+-.BR -i ", " --interfaces
-++.BR \-i ", " \-\-interfaces
-+ , une table de toutes (ou de l'interface
-+ .IR iface 
-+ spécifiée) les interfaces réseau sera affichée. Le format de sortie est le
-+ même que celui de la commande
-+-.B "ifconfig -e"
-++.B "ifconfig \-e"
-+ , et est décrit dans
-+ .BR ifconfig (8).
-+-.B "netstat -ei"
-++.B "netstat \-ei"
-+ affiche une table ou une seule entrée d'interface comme la commande 
-+ .BR ifconfig .
-+ Avec le paramètre
-+-.B -a
-++.B \-a
-+ , vous pouvez inclure les interfaces qui ne sont pas configurées (c.a.d qui
-+ n'ont pas l'indicateur
-+ .BR U = UP
-+@@ -129,7 +129,7 @@ armé).
-+ .SS "\-M, \-\-masquerade"
-+ 
-+ Permet de voir les sessions ayant de l'IP-masquerade. Avec le paramètre
-+-.B -e 
-++.B \-e 
-+ vous pouvez inclure quelques informations concernant les numéros de
-+ séquence et les deltas causés par des réécritures de données sur des
-+ sessions FTP (commande PORT). Le support de l'IP-Masquerade est utilisé
-+@@ -197,24 +197,24 @@ l'interrompiez.
-+ .SS "Proto" 
-+ Le protocole (TCP, UDP, RAW) utilisé par la socket. 
-+ 
-+-.SS "Recv-Q"
-++.SS "Recv\-Q"
-+ Le nombre d'octets non encore lus par le programme utilisateur connecté
-+ à cette socket.
-+ 
-+-.SS "Send-Q"
-++.SS "Send\-Q"
-+ Le nombre d'octets non encore acquittés par l'hôte distant.
-+ 
-+ .SS "Local Address (Adresse locale)" 
-+ L'adresse locale (nom d'hôte local) et numéro de port de la
-+ socket. Sauf si l'option
-+-.B -n
-++.B \-n
-+ est donnée, l'adresse de la prise est traduite en nom d'hôte,
-+ et le numéro de port est traduit en nom de service correspondant.
-+ 
-+ .SS "Foreign Address (Adresse distante)"
-+ L'adresse distante (nom d'hôte distant) et le numéro de port de
-+ la prise. Comme pour l'adresse locale et le numéro de port, l'option
-+-.B -n
-++.B \-n
-+ invalide la traduction du nom d'hôte et de service.
-+ 
-+ .SS "State (Etat)"
-+@@ -264,7 +264,7 @@ Le distant termine, et la socket est fer
-+ LISTEN
-+ La socket est à l'écoute de connexions entrantes. Ces sockets ne sont
-+ affichées que si le paramètre
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ est fourni.
-+ .TP
-+ .I
-+@@ -282,7 +282,7 @@ Le nom d'utilisateur ou l'UID du proprié
-+ .SS "PID/Program name (PID/Nom de Programme)"
-+ Le PID et le nom du programme (séparés par un slash) propriétaire de la
-+ socket. Le paramètre
-+-.B -p
-++.B \-p
-+ active l'affichage de cette colonne. Vous devez avoir les droits de
-+ .B root
-+ puisque vous devez avoir les droits d'accès aux processus pour visualiser
-+@@ -357,7 +357,7 @@ La socket n'est pas allouée
-+ LISTENING
-+ La socket est à l'écoute de demandes de connexions. Ces sockets ne sont
-+ affichées que si le paramètre
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ est fourni.
-+ .TP
-+ .I
-+@@ -406,7 +406,7 @@ Affiche le chemin correspondant à l'atta
-+ 
-+ .PP
-+ .SH NOTES
-+-Depuis la version 2.2 du noyau, netstat -i n'affiche plus les statistiques
-++Depuis la version 2.2 du noyau, netstat \-i n'affiche plus les statistiques
-+ des interfaces alias. Pour obtenir les compteurs par interface alias, vous
-+ devez définir des règles spécifiques à l'aide de la commande
-+ .BR ipchains (8).
-+@@ -482,18 +482,18 @@ si une socket change d'état au moment ou
-+ Ceci est peut probable.
-+ .br
-+ Le paramètre
-+-.B netstat -i
-++.B netstat \-i
-+ est décrit tel qu'il fonctionnera lorsque le code de la version BETA du
-+-paquetage net-tools aura été nettoyé.
-++paquetage net\-tools aura été nettoyé.
-+ 
-+ .PP
-+ .SH AUTEURS
-+ L'interface utilisateur de netstat a été développée par
-+-Fred Baumgarten <dc6iq@insu1.etec.uni-karlsruhe.de>. Les pages du
-++Fred Baumgarten <dc6iq@insu1.etec.uni\-karlsruhe.de>. Les pages du
-+ manuel essentiellement écrites par Matt Welsh
-+ <mdw@tc.cornell.edu>. Mis à jour par Alan Cox <Alan.Cox@linux.org>.
-+ .br
-+-La page de manuel et la commande incluse dans le paquetage net-tools
-++La page de manuel et la commande incluse dans le paquetage net\-tools
-+ a été totallement réécrite par Bernd Eckenfels 
-+ <ecki@linux.de>.
-+ .SH TRADUCTION
-+Index: net-tools/man/fr_FR/rarp.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/rarp.8
-++++ net-tools/man/fr_FR/rarp.8
-+@@ -1,14 +1,14 @@
-+-.TH RARP 8 "4 Août 1997" "net-tools" "Linux Programmer's Manual"
-++.TH RARP 8 "4 Août 1997" "net\-tools" "Linux Programmer's Manual"
-+ .SH NOM
-+ rarp \- manipule la table système RARP
-+ .SH SYNOPSIS
-+-.B "rarp [-V] [--version] [-h] [--help]"
-++.B "rarp [\-V] [\-\-version] [\-h] [\-\-help]"
-+ .br
-+-.B "rarp -a"
-++.B "rarp \-a"
-+ .br
-+-.B "rarp [-v] -d nom_d_hote ..."
-++.B "rarp [\-v] \-d nom_d_hote ..."
-+ .br
-+-.B "rarp [-v] [-t type] -s nom_d_hote adr_materiel"
-++.B "rarp [\-v] [\-t type] \-s nom_d_hote adr_materiel"
-+ .SH DESCRIPTION
-+ .B Rarp
-+ manipule la table RARP du noyau de différentes façons.  Les options de base
-+Index: net-tools/man/fr_FR/route.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/route.8
-++++ net-tools/man/fr_FR/route.8
-+@@ -1,4 +1,4 @@
-+-.TH ROUTE 8 "8 Août 1997" "net-tools" "Linux Programmer's Manual"
-++.TH ROUTE 8 "2007-12-02" "net\-tools" "Linux Programmer's Manual"
-+ .SH NAME
-+ route \- affiche / manipule la table de routage IP
-+ .SH SYNOPSIS
-+@@ -51,7 +51,7 @@ If]
-+ .RB [ \-V ] 
-+ .RB [ \-\-version ]
-+ .RB [ \-h ]
-+-.RB [ \--help ]
-++.RB [ \-\-help ]
-+ .SH DESCRIPTION
-+ .B Route
-+ manipule la table de routage IP du noyau.  Son utilisation première
-+@@ -77,7 +77,7 @@ savoir pourquoi la route vers votre serv
-+ .TP
-+ .B \-e
-+ utilise
-+-.BR netstat (8)-format
-++.BR netstat (8)\-format
-+ pour l'affichage de la table de routage.
-+ .B \-ee 
-+ Génère une très longue ligne avec tous les paramètres à partir de la table
-+@@ -90,13 +90,13 @@ la
-+ est un réseau.
-+ 
-+ .TP
-+-.B -host
-++.B \-host
-+ la
-+ .B cible 
-+ est un hôte.
-+ 
-+ .TP 
-+-.B -F
-++.B \-F
-+ affiche la table de routage FIB du noyau. L'organisation peut être changée avec
-+ .B \-e
-+ et
-+@@ -104,7 +104,7 @@ et
-+ .
-+ 
-+ .TP 
-+-.B -C
-++.B \-C
-+ affiche le cache de routage du noyau. 
-+ 
-+ .TP
-+@@ -188,25 +188,25 @@ modificateurs de route (metric - netmask
-+ 
-+ .SH EXEMPLES
-+ .TP
-+-.B route add -net 127.0.0.0
-++.B route add \-net 127.0.0.0
-+ ajoute l'entrée loopback normale, en utilisant le masque 255.0.0.0 (réseau
-+ de classe A, selon l'adresse de destination) et associée avec l'interface 
-+ "lo" (en supposant que ce périphérique a été correctement configuré avec
-+ .BR ifconfig (8)). 
-+ 
-+ .TP 
-+-.B route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
-++.B route add \-net 192.56.76.0 netmask 255.255.255.0 dev eth0
-+ ajoute une route vers le réseau 192.56.76.x via 
-+ "eth0". Le masque de classe C n'est pas vraiment nécessaire ici car
-+ 192.* est une adresse IP de classe C. Le mot "dev" peut être omis. 
-+ 
-+ .TP
-+-.B route add default gw mango-gw
-++.B route add default gw mango\-gw
-+ ajoute une route par défaut (qui sera utilisée si aucune autre route ne
-+ convient). Tous les paquets empreintant cette route passeront par
-+-"mango-gw". Le périphérique qui sera effectivement utilisé pour cette route
-+-dépend de la façon dont on atteint "mango-gw" - la route statique vers
-+-"mango-gw" devra être préalablement configurée. 
-++"mango\-gw". Le périphérique qui sera effectivement utilisé pour cette route
-++dépend de la façon dont on atteint "mango\-gw" - la route statique vers
-++"mango\-gw" devra être préalablement configurée. 
-+ 
-+ .TP
-+ .B route add ipx4 sl0
-+@@ -214,7 +214,7 @@ ajoute une route vers l'hôte "ipx4" via 
-+ "ipx4" est l'hôte SLIP).
-+ 
-+ .TP
-+-.B route add -net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-++.B route add \-net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-+ Cette commande route le réseau "192.57.66.x" par l'ancienne route vers l'interface SLIP.
-+ 
-+ .TP
-+@@ -285,8 +285,8 @@ de routage.
-+ Nombre de références à cette route. (Pas utilisé dans le noyau Linux.)
-+ .TP
-+ .B Use
-+-Count of lookups for the route.  Depending on the use of -F and -C this will
-+-be either route cache misses (-F) or hits (-C).
-++Count of lookups for the route.  Depending on the use of \-F and \-C this will
-++be either route cache misses (\-F) or hits (\-C).
-+ .TP
-+ .B Iface
-+ Interface vers laquelle les paquets empruntant cette route seront envoyés.
-+@@ -330,6 +330,6 @@ Linus Torvalds pour pl15. Alan Cox a ajo
-+ la gestion des fenêtres et MSS pour Linux 1.1.22. Le support de irtt 
-+ et la fusion avec netstat ont été réalisés par Bernd Eckenfels.
-+ .SH AUTEUR
-+-Maintenu par Phil Blundell <Philip.Blundell@pobox.com>.
-++Maintenu par Phil Blundell <Philip.Blundell@pobox.com> et Bernd Eckenfels <net-tools@lina.inka.de>.
-+ .SH TRADUCTION
-+-Jean-Michel VANSTEENE (vanstee@worldnet.fr)
-++Jean-Michel VANSTEENE <vanstee@worldnet.fr>
-+Index: net-tools/man/fr_FR/slattach.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/slattach.8
-++++ net-tools/man/fr_FR/slattach.8
-+@@ -2,7 +2,7 @@
-+ .SH NOM
-+ slattach \- attache une interface réseau à une ligne série
-+ .SH SYNOPSIS
-+-.B "slattach [-dehlLmnqv] [-c commande] [-p proto] [-s vitesse] [tty]"
-++.B "slattach [\-dehlLmnqv] [\-c commande] [\-p proto] [\-s vitesse] [tty]"
-+ .br
-+ .SH DESCRIPTION
-+ .B Slattach
-+@@ -12,46 +12,46 @@ ceci vous permettant de l'utiliser pour 
-+ vers d'autres systèmes.
-+ .SH OPTIONS
-+ .TP
-+-.B "[-c commande]"
-++.B "[\-c commande]"
-+ Exécute
-+ .B `commande'
-+ lorsque la ligne est suspendue. Ceci peut être utilisé pour lancer
-+ des scripts ou réétablir des connexions quand un lien tombe.
-+ .TP
-+-.B "[-d]"
-++.B "[\-d]"
-+ Valide le débogage.  Utile pour déterminer pourquoi une configuration
-+ ne fonctionne pas.
-+ .TP
-+-.B "[-h]"
-++.B "[\-h]"
-+ Termine lorsque la porteuse est perdue. Ceci fonctionne à la fois sur
-+ les périphériques /dev/tty et /dev/cua en contrôlant directement
-+ l'état de la porteuse toutes les 15 secondes.
-+ .TP
-+-.B "[-v]"
-++.B "[\-v]"
-+ Valide le mode verbeux.  Utile pour les shell scripts.
-+ .TP
-+-.B "[-q]"
-++.B "[\-q]"
-+ Opère en mode silencieux - pas de messages du tout.
-+ .TP
-+-.B "[-l]"
-++.B "[\-l]"
-+ Crée un fichier de vérouillage pour le périphérique comme
-+ pour UUCP dans /var/lock.
-+ .TP
-+-.B "[-n]"
-++.B "[\-n]"
-+ Equivalent à la commande "mesg n".
-+ .TP
-+-.B "[-m]"
-++.B "[\-m]"
-+ \fBn'\fPinitialise \fBpas\fP la ligne en mode raw 8 bits.
-+ .TP
-+-.B "[-e]"
-++.B "[\-e]"
-+ Termine correctement après l'initialisation du périphérique,
-+ au lieu d'attendre que la ligne soit suspendue.
-+ .TP
-+-.B "[-L]"
-++.B "[\-L]"
-+ Valide les opérations 3 lignes. Le terminal est mis en mode CLOCAL, 
-+ la surveillance de porteuse est invalidée.
-+ .TP
-+-.B "[-p proto]"
-++.B "[\-p proto]"
-+ Définit le protocole spécifique à utiliser sur la ligne.
-+ La valeur par défaut est 
-+ .B "cslip"
-+@@ -75,7 +75,7 @@ pour être actif sur la ligne. Pour les c
-+ .B axattach
-+ doit être utilisé.
-+ .TP
-+-.B "[-s vitesse]"
-++.B "[\-s vitesse]"
-+ Définit la vitesse de la ligne, différente de la valeur par défaut.
-+ .PP
-+ Si aucun argument n'est donné, la ligne courante du terminal
-+Index: net-tools/man/pt_BR/arp.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/arp.8
-++++ net-tools/man/pt_BR/arp.8
-+@@ -1,12 +1,12 @@
-+-.TH ARP 8 "22 de junho de 1996" "net-tools" "Manual do Programador Linux"
-++.TH ARP 8 "22 de junho de 1996" "net\-tools" "Manual do Programador Linux"
-+ .SH NOME
-+ arp \- manipula o cache ARP do sistema
-+ .SH SINOPSE
-+ .B arp 
-+ .RB [ \-vn ] 
-+ .RB [ "\-H tipo" ] 
-+-.RB [ "-i if" ] 
-+-.B -a 
-++.RB [ "\-i if" ] 
-++.B \-a 
-+ .RB [ máquina ]
-+ .PP
-+ .B arp 
-+@@ -20,7 +20,7 @@ arp \- manipula o cache ARP do sistema
-+ .RB [ \-v ] 
-+ .RB [ "\-H tipo" ] 
-+ .RB [ "\-i if" ] 
-+-.B -s máquina endereço_hardware
-++.B \-s máquina endereço_hardware
-+ .RB [ temp ] 
-+ .RB [ nopub ]
-+ .PP
-+@@ -28,7 +28,7 @@ arp \- manipula o cache ARP do sistema
-+ .RB [ \-v ] 
-+ .RB [ "\-H tipo" ] 
-+ .RB [ "\-i if" ] 
-+-.B -s máquina endereço_hardware
-++.B \-s máquina endereço_hardware
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+@@ -36,15 +36,15 @@ arp \- manipula o cache ARP do sistema
-+ .RB [ \-v ] 
-+ .RB [ "\-H tipo" ] 
-+ .RB [ "\-i if" ] 
-+-.B -Ds máquina ifa
-++.B \-Ds máquina ifa
-+ .RB [ "netmask nm" ] 
-+ .B pub
-+ .PP
-+ .B arp 
-+ .RB [ \-vnD ]
-+ .RB [ "\-H tipo" ] 
-+-.RB [ "-i if" ]
-+-.B -f arquivo
-++.RB [ "\-i if" ]
-++.B \-f arquivo
-+ 
-+ .SH DESCRIÇÃO
-+ .B arp
-+@@ -62,7 +62,7 @@ Mostra ao usuário o que está acontecendo
-+ mostra endereços numéricos, ao invés de tentar determinar os nomes simbólicos da
-+ máquina, porta e usuário.
-+ .TP
-+-.B "\-H type, \-\-hw-type type"
-++.B "\-H type, \-\-hw\-type type"
-+ Quando configurando ou lendo o cache ARP, este parâmetro opcional informa ao
-+ .B arp
-+ que classe de entradas devem ser verificadas. O valor padrão deste parâmetro é
-+@@ -96,7 +96,7 @@ ou
-+ para decidir se uma entrada pública ou privada deve ser removida. Se você
-+ não informar uma destas flags as duas entradas serão removidas.
-+ .TP
-+-.B "\-D, \-\-use-device"
-++.B "\-D, \-\-use\-device"
-+ Usa o endereço de hardware da interface 
-+ .BR ifa
-+ .TP
-+@@ -170,7 +170,7 @@ e entradas publicadas tem uma flag 
-+ .I /etc/ethers
-+ .SH AUTOR
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> com muitas melhorias
-+-feitas pelo mantenedor do net-tools, Bernd Eckenfels <net-tools@lina.inka.de>.
-++feitas pelo mantenedor do net\-tools, Bernd Eckenfels <net\-tools@lina.inka.de>.
-+ Tradução para a língua portuguesa feita por
-+ Arnaldo Carvalho de Melo <acme@conectiva.com.br> em 11/abril/1998.
-+ Revisado por 
-+Index: net-tools/man/pt_BR/hostname.1
-+===================================================================
-+--- net-tools.orig/man/pt_BR/hostname.1
-++++ net-tools/man/pt_BR/hostname.1
-+@@ -1,4 +1,4 @@
-+-.TH HOSTNAME 1 "28 de janeiro de 1996" "net-tools" "Manual do Programador Linux"
-++.TH HOSTNAME 1 "28 de janeiro de 1996" "net\-tools" "Manual do Programador Linux"
-+ 
-+ .SH NOME
-+ hostname \- mostra ou configura o nome da máquina 
-+@@ -21,7 +21,7 @@ ypdomainname \- mostra ou configura o no
-+ .RB [ \-f ]
-+ .RB [ \-\-fqdn ]
-+ .RB [ \-i ]
-+-.RB [ \-\-ip-address ]
-++.RB [ \-\-ip\-address ]
-+ .RB [ \-\-long ]
-+ .RB [ \-s ]
-+ .RB [ \-\-short ]
-+@@ -161,7 +161,7 @@ do domínio DNS (que é parte do FQDN) no 
-+ .I "\-h, \-\-help"
-+ Mostra uma mensagem sobre como utilizar o comando e termina.
-+ .TP
-+-.I "\-i, \-\-ip-address"
-++.I "\-i, \-\-ip\-address"
-+ Mostra o(s) endereço(s) IP da máquina.
-+ .TP
-+ .I "\-s, \-\-short"
-+@@ -180,9 +180,9 @@ Mostra o nome do domínio NIS. Se um parâ
-+ .SH ARQUIVOS
-+ .B /etc/hosts
-+ .SH AUTOR
-+-Peter Tobias, <tobias@et-inf.fho-emden.de>
-++Peter Tobias, <tobias@et\-inf.fho\-emden.de>
-+ .BR
-+-Bernd Eckenfels, <net-tools@lina.inka.de> (NIS e página man).
-++Bernd Eckenfels, <net\-tools@lina.inka.de> (NIS e página man).
-+ .BR
-+ Arnaldo Carvalho de Melo, <acme@conectiva.com.br> Tradução para a língua
-+ portuguesa.
-+Index: net-tools/man/pt_BR/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/ifconfig.8
-++++ net-tools/man/pt_BR/ifconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH IFCONFIG 8 "10 de fevereiro de 1996" "net-tools" "Manual do Programador Linux"
-++.TH IFCONFIG 8 "2007-12-02" "net\-tools" "Manual do Programador Linux"
-+ .SH NOME
-+ ifconfig \- configura uma interface de rede
-+ .SH SINOPSE
-+@@ -61,7 +61,7 @@ o sinal de menos (\-) estiver presente a
-+ .TP
-+ .B "[\-]trailers" 
-+ Habilita ou desabilita o uso de trailer em frames Ethernet. Não é
-+-utilizada na implementação atual do pacote net-tools.
-++utilizada na implementação atual do pacote net\-tools.
-+ .TP
-+ .B "[\-]allmulti" 
-+ Habilita ou desabilita o modo
-+@@ -97,7 +97,7 @@ uso de sub-redes.
-+ Configura a linha de interrupção (IRQ) usada por este dispositivo. Muitos
-+ dispositivos não suportam configuração dinâmica de IRQ.
-+ .TP
-+-.B "[-]broadcast [endereço]"
-++.B "[\-]broadcast [endereço]"
-+ Se o argumento endereço for informado, configura o endereço de protocolo
-+ broadcast para esta interface. De outra forma ele somente configura a flag
-+ .B IFF_BROADCAST
-+@@ -105,7 +105,7 @@ da interface.  Se a palavra-chave for pr
-+ .B (-)
-+ , então a flag é removida.
-+ .TP
-+-.B "[-]pointopoint [endereço]"
-++.B "[\-]pointopoint [endereço]"
-+ Esta palavra-chave habilita o modo
-+ .B ponto-a-ponto
-+ da interface, significando que ela é um link direto entre duas máquinas
-+@@ -169,7 +169,7 @@ endereços usando o comando
-+ Os endereços appletalk DDP e IPX serão mostrados, mas não podem ser alterados
-+ com este comando.
-+ .SH VEJA TAMBÉM
-+-route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-++route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
-+ .SH AUTORES
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+ Alan Cox, <Alan.Cox@linux.org>
-+Index: net-tools/man/pt_BR/netstat.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/netstat.8
-++++ net-tools/man/pt_BR/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Traduzido para português por Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-+ .\" Revisado por Jorge Luiz Godoy Filho <jorge@bestway.com.br>
-+ .\"
-+-.TH NETSTAT 8 "2007-12-02" "net-tools" "Manual do Programador Linux"
-++.TH NETSTAT 8 "2007-12-02" "net\-tools" "Manual do Programador Linux"
-+ 
-+ .SH NOME
-+ netstat \- Mostra conexões de rede, tabelas de roteamento, estatísticas de interface e conexões
-+@@ -72,14 +72,14 @@ Você pode ver o estado das conexões de r
-+ abertos. Esta é a operação padrão: se você não especificar nenhuma
-+ família de endereços, os sockets ativos de todas as famílias de endereços
-+ configuradas serão mostrados. Com
-+-.B -e
-++.B \-e
-+ você obterá informações adicionais (userid). Com a chave
-+-.B -v
-++.B \-v
-+ você poderá fazer com que o netstat reclame sobre famílias de endereços
-+ conhecidas que não sejam suportadas pelo kernel. A opção
-+-.B -o
-++.B \-o
-+ mostra algumas informações adicionais sobre temporizadores de rede.
-+-.B -a
-++.B \-a
-+ mostra todos os sockets, incluindo sockets de servidores. A família de
-+ endereços
-+ .B inet
-+@@ -89,8 +89,8 @@ mostrará sockets raw, udp e tcp.
-+ Com a opção
-+ .BR \-r ", " \-\-route
-+ você obterá as tabelas de roteamento do kernel no mesmo formato usado por
-+-.BR "route -e" .
-+-.B "netstat -er" 
-++.BR "route \-e" .
-++.B "netstat \-er" 
-+ usará o formato de apresentação do comando
-+ .BR route .
-+ Por favor veja
-+@@ -99,18 +99,18 @@ para maiores detalhes.
-+ 
-+ .SS "\-i, \-\-interfaces \fIiface\fI"
-+ Se você usar a opção
-+-.BR -i ", " --interfaces
-++.BR \-i ", " \-\-interfaces
-+ , uma tabela de todas (ou da
-+ .IR iface
-+ especificada) as interfaces de rede será mostrada. A saída usa o formato
-+-.B "ifconfig -e"
-++.B "ifconfig \-e"
-+ , e é descrita em
-+ .BR ifconfig (8).
-+-.B "netstat -ei" 
-++.B "netstat \-ei" 
-+ mostrará uma tabela ou uma entrada de interface como
-+ .B ifconfig
-+ mostra. Com a chave
-+-.B -a
-++.B \-a
-+ , você pode incluir interfaces que não estejam configuradas (i.e. não tem
-+ a flag 
-+ .BR U = UP
-+@@ -119,7 +119,7 @@ configurada).
-+ .SS "\-M, \-\-masquerade"
-+ 
-+ Uma lista de todas as sessões mascaradas também pode ser vista. Com a chave
-+-.B -e 
-++.B \-e 
-+ você pode incluir mais algumas informações sobre numeração sequencial e deltas
-+ , causados por reescritas de dados em sessões FTP (comando PORT).
-+ O suporte a mascaramento é usado para esconder máquinas em endereços de
-+@@ -179,23 +179,23 @@ você o interrompa.
-+ .SS "Proto" 
-+ O protocolo (tcp, udp, raw) usado pelo socket.
-+ 
-+-.SS "Recv-Q"
-++.SS "Recv\-Q"
-+ O contador de bytes não copiados pelo programa conectado a este socket.
-+ 
-+-.SS "Send-Q"
-++.SS "Send\-Q"
-+ O contador de bytes não confirmados pela máquina remota.
-+ 
-+ .SS "Endereço Local" 
-+ O endereço local (nome da máquina local) e o numero da porta do socket. A menos
-+ que a chave
-+-.B -n
-++.B \-n
-+ seja especificada o endereço do socket será resolvido para seu nome de máquina
-+ canônico e o número da porta será traduzido para o serviço correspondente.
-+ 
-+ .SS "Endereço Remoto"
-+ O endereço remoto (nome da máquina remota) e o número da porta do socket. Como
-+ com o endereço local, a chave
-+-.B -n
-++.B \-n
-+ desliga a resolução do nome da máquina e do serviço.
-+ 
-+ .SS "Estado"
-+@@ -245,7 +245,7 @@ confirmação.
-+ OUVINDO
-+ O socket está ouvindo por conexões. Estes socket são somente mostrados se
-+ a chave
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ for especificada.
-+ .TP
-+ .I
-+@@ -329,7 +329,7 @@ Este socket não está alocado.
-+ LISTENING
-+ O socket está aguardando por uma solicitação de conexão. São mostrados
-+ apenas se as opções
-+-.BR -a , --listening
-++.BR \-a , \-\-listening
-+ forem selecionadas.
-+ .TP
-+ .I
-+@@ -372,7 +372,7 @@ Mostra o caminho (path) do processo do q
-+ 
-+ .PP
-+ .SH NOTAS
-+-Desde o kernel 2.2 o netstat -i não mostra estatísticas para apelidos (aliases)
-++Desde o kernel 2.2 o netstat \-i não mostra estatísticas para apelidos (aliases)
-+ de interfaces. Para obter contadores por apelido de interface você precisa
-+ configurar regras explícitas usando o comando
-+ +.BR ipchains(8)
-+@@ -447,20 +447,20 @@ Ocasionalmente informações estranhas pod
-+ enquanto é visualizado. Isso é incomum.
-+ .br
-+ As opções descritas para
-+-.B netstat -i
-++.B netstat \-i
-+ foram descritas como deverão funcionar após alguma limpeza da liberação
-+-BETA do pacote net-tools.
-++BETA do pacote net\-tools.
-+ 
-+ .PP
-+ .SH AUTORES
-+ A interface com o usuário foi escrita por Fred Baumgarten
-+-<dc6iq@insu1.etec.uni-karlsruhe.de> a página do manual basicamente
-++<dc6iq@insu1.etec.uni\-karlsruhe.de> a página do manual basicamente
-+ por Matt Welsh <mdw@tc.cornell.edu>. Foi atualizada por
-+ Alan Cox <Alan.Cox@linux.org> mas poderia ter sido feita com um pouco
-+ mais de trabalho.
-+ .BR
-+ .LP
-+-A página do manual e os comandos incluídos no pacote net-tools
-++A página do manual e os comandos incluídos no pacote net\-tools
-+ foram totalmente reescritos desde Bernd Eckenfels
-+ <ecki@linux.de>.
-+ .BR
-+Index: net-tools/man/pt_BR/rarp.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/rarp.8
-++++ net-tools/man/pt_BR/rarp.8
-+@@ -1,12 +1,12 @@
-+-.TH RARP 8 "10 de fevereiro de 1996" "net-tools" "Manual do Programador Linux"
-++.TH RARP 8 "10 de fevereiro de 1996" "net\-tools" "Manual do Programador Linux"
-+ .SH NOME
-+ rarp \- manipula a tabela RARP do sistema
-+ .SH SINOPSE
-+-.B "rarp [-v] [-t tipo] -a [máquina]"
-++.B "rarp [\-v] [\-t tipo] \-a [máquina]"
-+ .br
-+-.B "rarp [-v] -d máquina ..."
-++.B "rarp [\-v] \-d máquina ..."
-+ .br
-+-.B "rarp [-v] [-t tipo] -s máquina endereço_hardware"
-++.B "rarp [\-v] [\-t tipo] \-s máquina endereço_hardware"
-+ .SH DESCRIÇÃO
-+ .B Rarp
-+ manipula as tabelas RARP do kernel de varias formas. As opções principais
-+Index: net-tools/man/pt_BR/route.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/route.8
-++++ net-tools/man/pt_BR/route.8
-+@@ -1,4 +1,4 @@
-+-.TH ROUTE 8 "27 Jan 1996" "net-tools" "Manual do Programador Linux"
-++.TH ROUTE 8 "2007-12-02" "net\-tools" "Manual do Programador Linux"
-+ .SH NOME
-+ route \- mostra / manipula a tabela de roteamento IP
-+ .SH SINOPSE
-+@@ -47,7 +47,7 @@ If]
-+ .RB [ \-V ] 
-+ .RB [ \-\-version ]
-+ .RB [ \-h ]
-+-.RB [ \--help ]
-++.RB [ \-\-help ]
-+ .SH DESCRICAO
-+ .B Route
-+ manipula a tabela de roteamento IP do kernel. Seu principal uso é
-+@@ -186,7 +186,7 @@ modificadores do route (metric - netmask
-+ 
-+ .SH EXEMPLOS
-+ .TP
-+-.B route add -net 127.0.0.0
-++.B route add \-net 127.0.0.0
-+ Adiciona a entrada para a interface loopback normal, usando mascara igual
-+ a 255.0.0.0 (rede classe A, determinada a partir do endereço de destino),
-+ associada ao dispositivo "lo" (assumindo que este dispositivo tenha sido
-+@@ -194,17 +194,17 @@ previamente configurado com o
-+ .BR ifconfig (8)). 
-+ 
-+ .TP 
-+-.B route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
-++.B route add \-net 192.56.76.0 netmask 255.255.255.0 dev eth0
-+ Adiciona uma rota para a rede 192.56.76.x através da interface "eth0". O 
-+ modificador de mascara classe C não é realmente necessário aqui por que
-+ 192.* é um endereço IP de classe C. A palavra "dev" pode ser omitida aqui.
-+ 
-+ .TP
-+-.B route add default gw mango-gw
-++.B route add default gw mango\-gw
-+ Adiciona uma rota default (que será usada se nenhuma outra rota for encontrada).
-+-Todos os pacotes que usarem esta rota serão passados para a máquina "mango-gw".
-++Todos os pacotes que usarem esta rota serão passados para a máquina "mango\-gw".
-+ O dispositivo que será utilizado para esta rota depende de como é possível
-+-alcançar "mango-gw" - a rota estática para "mango-gw" terá que ser configurada
-++alcançar "mango\-gw" - a rota estática para "mango\-gw" terá que ser configurada
-+ previamente.
-+ 
-+ .TP
-+@@ -213,12 +213,12 @@ Adiciona uma rota para a máquina "ipx4" 
-+ que "ipx4" é a máquina SLIP).
-+ 
-+ .TP
-+-.B route add -net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-++.B route add \-net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-+ Este comando adiciona a rede "192.57.66.x" para ser alcançada através da
-+ rota anterior através da interface SLIP.
-+ 
-+ .TP
-+-.B route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-++.B route add \-net 224.0.0.0 netmask 240.0.0.0 dev eth0
-+ Isto é bem obscura, documentada para que as pessoas saibam como usá-la. 
-+ Configura para que todas as rotas IP classe D (multicast) vão através da
-+ interface "eth0". Esta é a linha de configuração normal a ser usada com
-+@@ -239,8 +239,8 @@ A rede ou máquina de destino.
-+ A máquina roteador ou '*' se nenhuma estiver configurada.
-+ .TP
-+ .B Mascara Genérica
-+-A mascara para a rede destino. '255.255.255.255' para uma máquina de destino,
-+-'0.0.0.0' para a rota
-++A mascara para a rede destino. '255.255.255.255' para uma máquina de
-++destino, '0.0.0.0' para a rota
-+ .B default
-+ .
-+ .TP
-+@@ -321,7 +321,7 @@ para o linux foi originalmente escrito p
-+ Linus Torvalds para a versão pl15. Alan Cox adicionou as opções para
-+ mss e window no kernel 1.1.22. O suporte a irtt (compartilhado com o
-+ netstat) foi feito por Bernd Eckenfels.
-++.SH AUTHOR
-++Currently maintained by Phil Blundell <Philip.Blundell@pobox.com> and Bernd Eckenfels <net-tools@lina.inka.de>.
-+ .SH TRADUÇÃO
-+ Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 13/04/1998
-+-.SH BUGS
-+-nenhum :)
---- net-tools-1.60.orig/debian/patches/CVS-20020730-route.c_opts_64.patch
-+++ net-tools-1.60/debian/patches/CVS-20020730-route.c_opts_64.patch
-@@ -0,0 +1,39 @@
-+Add support for -6 & -4 flags to route.c
-+From upstream CVS
-+Index: net-tools/route.c
-+===================================================================
-+--- net-tools.orig/route.c
-++++ net-tools/route.c
-+@@ -2,7 +2,7 @@
-+  * route        This file contains an implementation of the command
-+  *              that manages the IP routing table in the kernel.
-+  *
-+- * Version:     $Id: route.c,v 1.9 2001/04/15 14:41:17 pb Exp $
-++ * Version:     $Id: route.c,v 1.10 2002/07/30 05:24:20 ecki Exp $
-+  *
-+  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-+  *
-+@@ -142,7 +142,7 @@ int main(int argc, char **argv)
-+     }
-+ 
-+     /* Fetch the command-line arguments. */
-+-    while ((i = getopt_long(argc, argv, "A:eCFhnNVv?", longopts, &lop)) != EOF)
-++    while ((i = getopt_long(argc, argv, "A:eCFhnN64Vv?", longopts, &lop)) != EOF)
-+ 	switch (i) {
-+ 	case -1:
-+ 	    break;
-+@@ -176,6 +176,14 @@ int main(int argc, char **argv)
-+ 	    if ((i = aftrans_opt(optarg)))
-+ 		exit(i);
-+ 	    break;
-++	case '6':
-++	    if ((i = aftrans_opt("inet6")))
-++		exit(i);
-++	    break;
-++	case '4':
-++	    if ((i = aftrans_opt("inet")))
-++		exit(i);
-++	    break;
-+ 	case 'V':
-+ 	    version();
-+ 	case 'h':
---- net-tools-1.60.orig/debian/patches/CVS-lib_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-lib_sync.patch
-@@ -0,0 +1,1873 @@
-+Sync with upstream CVS, for most files in lib/
-+
-+Index: net-tools/lib/Makefile
-+===================================================================
-+--- net-tools.orig/lib/Makefile
-++++ net-tools/lib/Makefile
-+@@ -16,7 +16,7 @@
-+ #
-+ 
-+ 
-+-HWOBJS	 = hw.o loopback.o slip.o ether.o ax25.o ppp.o arcnet.o tr.o tunnel.o frame.o sit.o rose.o ash.o fddi.o hippi.o hdlclapb.o strip.o irda.o ec_hw.o x25.o
-++HWOBJS	 = hw.o loopback.o slip.o ether.o ax25.o ppp.o arcnet.o tr.o tunnel.o frame.o sit.o rose.o ash.o fddi.o hippi.o hdlclapb.o strip.o irda.o ec_hw.o x25.o eui64.o ib.o
-+ AFOBJS	 = unix.o inet.o inet6.o ax25.o ipx.o ddp.o ipx.o netrom.o af.o rose.o econet.o x25.o
-+ AFGROBJS = inet_gr.o inet6_gr.o ipx_gr.o ddp_gr.o netrom_gr.o ax25_gr.o rose_gr.o getroute.o x25_gr.o
-+ AFSROBJS = inet_sr.o inet6_sr.o netrom_sr.o ipx_sr.o setroute.o x25_sr.o
-+Index: net-tools/lib/ddp_gr.c
-+===================================================================
-+--- net-tools.orig/lib/ddp_gr.c
-++++ net-tools/lib/ddp_gr.c
-+@@ -1,3 +1,20 @@
-++/*
-++ * lib/ddp_gr.c         Prinbting of DDP (AppleTalk) routing table
-++ *                      used by the NET-LIB.
-++ *
-++ * NET-LIB      
-++ *
-++ * Version:     $Id: ddp_gr.c,v 1.4 2002/06/02 05:25:15 ecki Exp $
-++ *
-++ * Author:      Ajax <ajax@firest0rm.org>
-++ *
-++ * Modification:
-++ *  2002-06-02 integrated into main source by Bernd Eckenfels
-++ *
-++ */
-++
-++/* TODO: name lookups (/etc/atalk.names?  NBP?) */
-++
-+ #include "config.h"
-+ 
-+ #if HAVE_AFATALK
-+@@ -16,9 +33,61 @@
-+ #include "pathnames.h"
-+ #include "intl.h"
-+ 
-++/* stolen from inet_gr.c */
-++#define flags_decode(i,o) do {                  \
-++        o[0] = '\0';                            \
-++        if (i & RTF_UP) strcat(o, "U");         \
-++        if (i & RTF_GATEWAY) strcat(o, "G");    \
-++        if (i & RTF_REJECT) strcat(o, "!");     \
-++        if (i & RTF_HOST) strcat(o, "H");       \
-++        if (i & RTF_REINSTATE) strcat(o, "R");  \
-++        if (i & RTF_DYNAMIC) strcat(o, "D");    \
-++        if (i & RTF_MODIFIED) strcat(o, "M");   \
-++        if (i & RTF_DEFAULT) strcat(o, "d");    \
-++        if (i & RTF_ALLONLINK) strcat(o, "a");  \
-++        if (i & RTF_ADDRCONF) strcat(o, "c");   \
-++        if (i & RTF_NONEXTHOP) strcat(o, "o");  \
-++        if (i & RTF_EXPIRES) strcat(o, "e");    \
-++        if (i & RTF_CACHE) strcat(o, "c");      \
-++        if (i & RTF_FLOW) strcat(o, "f");       \
-++        if (i & RTF_POLICY) strcat(o, "p");     \
-++        if (i & RTF_LOCAL) strcat(o, "l");      \
-++        if (i & RTF_MTU) strcat(o, "u");        \
-++        if (i & RTF_WINDOW) strcat(o, "w");     \
-++        if (i & RTF_IRTT) strcat(o, "i");       \
-++        if (i & RTF_NOTCACHED) strcat(o, "n");  \
-++    } while (0)
-++
-+ int DDP_rprint(int options)
-+ {
-+-    fprintf(stderr, _("Routing table for `ddp' not yet supported.\n"));
-+-    return (1);
-++    FILE *fp;
-++    char *dest, *gw, *dev, *flags;
-++    char oflags[32];
-++    char *hdr = "Destination     Gateway         Device          Flags";
-++
-++    fp = fopen(_PATH_PROCNET_ATALK_ROUTE, "r");
-++
-++    if (!fp) {
-++        perror("Error opening " _PATH_PROCNET_ATALK_ROUTE);
-++        fprintf(stderr, "DDP (AppleTalk) not configured on this system.\n");
-++        return 1;
-++    }
-++
-++    fscanf(fp, "%as %as %as %as\n", &dest, &gw, &flags, &dev);
-++    free(dest); free(gw); free(dev); free(flags);
-++
-++    printf("%s\n", hdr);
-++
-++    while (fscanf(fp, "%as %as %as %as\n", &dest, &gw, &flags, &dev) == 4) {
-++        int iflags = atoi(flags);
-++        flags_decode(iflags, oflags);
-++        printf("%-16s%-16s%-16s%-s\n", dest, gw, dev, oflags);
-++        free(dest); free(gw); free(dev); free(flags);
-++    }
-++
-++    fclose(fp);
-++    
-++    return 0;
-++
-+ }
-+ #endif
-+Index: net-tools/lib/ether.c
-+===================================================================
-+--- net-tools.orig/lib/ether.c
-++++ net-tools/lib/ether.c
-+@@ -2,7 +2,7 @@
-+  * lib/ether.c        This file contains an implementation of the "Ethernet"
-+  *              support functions.
-+  *
-+- * Version:     $Id: ether.c,v 1.7 1999/09/27 11:00:47 philip Exp $
-++ * Version:     $Id: ether.c,v 1.8 2002/07/30 05:17:29 ecki Exp $
-+  *
-+  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+  *              Copyright 1993 MicroWalt Corporation
-+@@ -39,7 +39,7 @@ static char *pr_ether(unsigned char *ptr
-+ {
-+     static char buff[64];
-+ 
-+-    snprintf(buff, sizeof(buff), "%02X:%02X:%02X:%02X:%02X:%02X",
-++    snprintf(buff, sizeof(buff), "%02x:%02x:%02x:%02x:%02x:%02x",
-+ 	     (ptr[0] & 0377), (ptr[1] & 0377), (ptr[2] & 0377),
-+ 	     (ptr[3] & 0377), (ptr[4] & 0377), (ptr[5] & 0377)
-+ 	);
-+Index: net-tools/lib/hw.c
-+===================================================================
-+--- net-tools.orig/lib/hw.c
-++++ net-tools/lib/hw.c
-+@@ -2,7 +2,7 @@
-+  * lib/hw.c   This file contains the top-level part of the hardware
-+  *              support functions module.
-+  *
-+- * Version:     $Id: hw.c,v 1.17 2000/05/20 13:38:10 pb Exp $
-++ * Version:     $Id: hw.c,v 1.19 2008/10/03 01:52:04 ecki Exp $
-+  *
-+  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-+  *
-+@@ -73,6 +73,10 @@ extern struct hwtype irda_hwtype;
-+ 
-+ extern struct hwtype ec_hwtype;
-+ 
-++extern struct hwtype ib_hwtype;
-++
-++extern struct hwtype eui64_hwtype;
-++
-+ static struct hwtype *hwtypes[] =
-+ {
-+ 
-+@@ -144,6 +148,12 @@ static struct hwtype *hwtypes[] =
-+ #if HAVE_HWX25
-+     &x25_hwtype,
-+ #endif
-++#if HAVE_HWIB
-++    &ib_hwtype,
-++#endif
-++#if HAVE_HWEUI64
-++    &eui64_hwtype,
-++#endif
-+     &unspec_hwtype,
-+     NULL
-+ };
-+@@ -217,6 +227,12 @@ void hwinit()
-+ #if HAVE_HWEC
-+     ec_hwtype.title = _("Econet");
-+ #endif
-++#if HAVE_HWIB
-++    ib_hwtype.title = _("InfiniBand");
-++#endif
-++#if HAVE_HWEUI64
-++    eui64_hwtype.title = _("Generic EUI-64");
-++#endif
-+     sVhwinit = 1;
-+ }
-+ 
-+Index: net-tools/lib/inet.c
-+===================================================================
-+--- net-tools.orig/lib/inet.c
-++++ net-tools/lib/inet.c
-+@@ -3,7 +3,7 @@
-+  *              support functions for the net-tools.
-+  *              (NET-3 base distribution).
-+  *
-+- * Version:    $Id: inet.c,v 1.13 1999/12/11 13:35:56 freitag Exp $
-++ * Version:    $Id: inet.c,v 1.14 2003/10/19 11:57:37 pb Exp $
-+  *
-+  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+  *              Copyright 1993 MicroWalt Corporation
-+@@ -144,7 +144,7 @@ static int INET_rresolve(char *name, siz
-+     struct hostent *ent;
-+     struct netent *np;
-+     struct addr *pn;
-+-    unsigned long ad, host_ad;
-++    u_int32_t ad, host_ad;
-+     int host = 0;
-+ 
-+     /* Grmpf. -FvK */
-+@@ -155,7 +155,7 @@ static int INET_rresolve(char *name, siz
-+ 	errno = EAFNOSUPPORT;
-+ 	return (-1);
-+     }
-+-    ad = (unsigned long) sin->sin_addr.s_addr;
-++    ad = sin->sin_addr.s_addr;
-+ #ifdef DEBUG
-+     fprintf (stderr, "rresolve: %08lx, mask %08x, num %08x \n", ad, netmask, numeric);
-+ #endif
-+Index: net-tools/lib/inet6.c
-+===================================================================
-+--- net-tools.orig/lib/inet6.c
-++++ net-tools/lib/inet6.c
-+@@ -3,7 +3,7 @@
-+  *              support functions for the net-tools.
-+  *              (most of it copied from lib/inet.c 1.26).
-+  *
-+- * Version:     $Id: inet6.c,v 1.10 2000/10/28 11:04:00 pb Exp $
-++ * Version:     $Id: inet6.c,v 1.12 2002/12/10 01:03:09 ecki Exp $
-+  *
-+  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+  *              Copyright 1993 MicroWalt Corporation
-+@@ -44,6 +44,21 @@
-+ 
-+ extern int h_errno;		/* some netdb.h versions don't export this */
-+ 
-++char * fix_v4_address(char *buf, struct in6_addr *in6) 
-++{ 
-++	if (IN6_IS_ADDR_V4MAPPED(in6->s6_addr)) { 
-++			char *s =strchr(buf, '.'); 
-++			if (s) { 
-++				while (s > buf && *s != ':')
-++					--s;
-++				if (*s == ':') ++s; 	
-++				else s = NULL; 
-++			} 	
-++			if (s) return s;
-++	} 
-++	return buf; 
-++} 
-++
-+ static int INET6_resolve(char *name, struct sockaddr_in6 *sin6)
-+ {
-+     struct addrinfo req, *ai;
-+@@ -83,14 +98,14 @@ static int INET6_rresolve(char *name, st
-+ 	return (-1);
-+     }
-+     if (numeric & 0x7FFF) {
-+-	inet_ntop(AF_INET6, &sin6->sin6_addr, name, 80);
-++	inet_ntop( AF_INET6, &sin6->sin6_addr, name, 80);
-+ 	return (0);
-+     }
-+     if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
-+         if (numeric & 0x8000)
-+ 	    strcpy(name, "default");
-+ 	else
-+-	    strcpy(name, "*");
-++	    strcpy(name, "[::]");
-+ 	return (0);
-+     }
-+ 
-+@@ -109,13 +124,14 @@ static void INET6_reserror(char *text)
-+ }
-+ 
-+ 
-++
-+ /* Display an Internet socket address. */
-+ static char *INET6_print(unsigned char *ptr)
-+ {
-+     static char name[80];
-+ 
-+     inet_ntop(AF_INET6, (struct in6_addr *) ptr, name, 80);
-+-    return name;
-++	return fix_v4_address(name, (struct in6_addr *)ptr);
-+ }
-+ 
-+ 
-+@@ -129,13 +145,14 @@ static char *INET6_sprint(struct sockadd
-+ 	return safe_strncpy(buff, _("[NONE SET]"), sizeof(buff));
-+     if (INET6_rresolve(buff, (struct sockaddr_in6 *) sap, numeric) != 0)
-+ 	return safe_strncpy(buff, _("[UNKNOWN]"), sizeof(buff));
-+-    return (buff);
-++    return (fix_v4_address(buff, &((struct sockaddr_in6 *)sap)->sin6_addr));
-+ }
-+ 
-+ 
-+ static int INET6_getsock(char *bufp, struct sockaddr *sap)
-+ {
-+     struct sockaddr_in6 *sin6;
-++	char *p;
-+ 
-+     sin6 = (struct sockaddr_in6 *) sap;
-+     sin6->sin6_family = AF_INET6;
-+@@ -143,7 +160,9 @@ static int INET6_getsock(char *bufp, str
-+ 
-+     if (inet_pton(AF_INET6, bufp, sin6->sin6_addr.s6_addr) <= 0)
-+ 	return (-1);
-+-
-++	p = fix_v4_address(bufp, &sin6->sin6_addr);
-++	if (p != bufp) 
-++		memcpy(bufp, p, strlen(p)+1); 
-+     return 16;			/* ?;) */
-+ }
-+ 
-+Index: net-tools/lib/inet6_gr.c
-+===================================================================
-+--- net-tools.orig/lib/inet6_gr.c
-++++ net-tools/lib/inet6_gr.c
-+@@ -1,4 +1,4 @@
-+-/*
-++ /*
-+    Modifications:
-+    1998-07-01 - Arnaldo Carvalho de Melo - GNU gettext instead of catgets,
-+    snprintf instead of sprintf
-+@@ -71,11 +71,15 @@ int rprint_fib6(int ext, int numeric)
-+         printf(_("INET6 (IPv6) not configured in this system.\n"));
-+ 	return 1;
-+     }
-+-    printf(_("Kernel IPv6 routing table\n"));
-+ 
-+-    printf(_("Destination                                 "
-+-	     "Next Hop                                "
-+-	     "Flags Metric Ref    Use Iface\n"));
-++    if (numeric & RTF_CACHE)
-++    	printf(_("Kernel IPv6 routing cache\n"));
-++    else
-++    	printf(_("Kernel IPv6 routing table\n"));
-++
-++    printf(_("Destination                    "
-++	     "Next Hop                   "
-++	     "Flag Met Ref Use If\n"));
-+ 
-+     while (fgets(buff, 1023, fp)) {
-+ 	num = sscanf(buff, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %08x %08x %08x %08x %s\n",
-+@@ -87,13 +91,19 @@ int rprint_fib6(int ext, int numeric)
-+ 		     &slen,
-+ 		     naddr6p[0], naddr6p[1], naddr6p[2], naddr6p[3],
-+ 		     naddr6p[4], naddr6p[5], naddr6p[6], naddr6p[7],
-+-		     &metric, &use, &refcnt, &iflags, iface);
-++		     &metric, &refcnt, &use, &iflags, iface);
-+ #if 0
-+ 	if (num < 23)
-+ 	    continue;
-+ #endif
-+-	if (!(iflags & RTF_UP))
-+-	    continue;
-++	if (iflags & RTF_CACHE) {
-++		if (!(numeric & RTF_CACHE))
-++			continue;
-++	} else {
-++		if (numeric & RTF_CACHE)
-++			continue;
-++	}
-++			
-+ 	/* Fetch and resolve the target address. */
-+ 	snprintf(addr6, sizeof(addr6), "%s:%s:%s:%s:%s:%s:%s:%s",
-+ 		 addr6p[0], addr6p[1], addr6p[2], addr6p[3],
-+@@ -112,7 +122,12 @@ int rprint_fib6(int ext, int numeric)
-+ 		 inet6_aftype.sprint((struct sockaddr *) &snaddr6, 1));
-+ 
-+ 	/* Decode the flags. */
-+-	strcpy(flags, "U");
-++
-++	flags[0]=0;
-++	if (iflags & RTF_UP)
-++	    strcat(flags, "U");
-++	if (iflags & RTF_REJECT)
-++	    strcat(flags, "!");
-+ 	if (iflags & RTF_GATEWAY)
-+ 	    strcat(flags, "G");
-+ 	if (iflags & RTF_HOST)
-+@@ -123,9 +138,19 @@ int rprint_fib6(int ext, int numeric)
-+ 	    strcat(flags, "A");
-+ 	if (iflags & RTF_CACHE)
-+ 	    strcat(flags, "C");
-++	if (iflags & RTF_ALLONLINK)
-++	    strcat(flags, "a");
-++	if (iflags & RTF_EXPIRES)
-++	    strcat(flags, "e");
-++	if (iflags & RTF_MODIFIED)
-++	    strcat(flags, "m");
-++	if (iflags & RTF_NONEXTHOP)
-++	    strcat(flags, "n");
-++	if (iflags & RTF_FLOW)
-++	    strcat(flags, "f");
-+ 
-+ 	/* Print the info. */
-+-	printf("%-43s %-39s %-5s %-6d %-2d %7d %-8s\n",
-++	printf("%-30s %-26s %-4s %-3d %-1d%6d %s\n",
-+ 	       addr6, naddr6, flags, metric, refcnt, use, iface);
-+     }
-+ 
-+@@ -144,8 +169,7 @@ int rprint_cache6(int ext, int numeric)
-+     char addr6p[8][5], haddrp[6][3];
-+ 
-+     if (!fp) {
-+-	ESYSNOT("nd_print", "ND Table");
-+-	return 1;
-++	return rprint_fib6(ext, numeric | RTF_CACHE);
-+     }
-+     printf(_("Kernel IPv6 Neighbour Cache\n"));
-+ 
-+Index: net-tools/lib/inet_sr.c
-+===================================================================
-+--- net-tools.orig/lib/inet_sr.c
-++++ net-tools/lib/inet_sr.c
-+@@ -3,6 +3,7 @@
-+    1998-07-01 - Arnaldo Carvalho de Melo - GNU gettext instead of catgets
-+    1999-10-07 - Kurt Garloff		 - for -host and gws: prefer host names
-+ 						over networks (or even reject)
-++   2003-10-11 - Maik Broemme		 - gcc 3.x warnign fixes (default: break;)
-+  */
-+ 
-+ #include "config.h"
-+@@ -104,7 +105,6 @@ static int INET_setroute(int action, int
-+        isnet = 1; break;
-+     case 2:
-+        isnet = 0; break;
-+-    default:
-+     }
-+ 
-+     /* Fill in the other fields. */
-+Index: net-tools/lib/interface.c
-+===================================================================
-+--- net-tools.orig/lib/interface.c
-++++ net-tools/lib/interface.c
-+@@ -7,7 +7,7 @@
-+    8/2000  Andi Kleen make the list operations a bit more efficient.
-+    People are crazy enough to use thousands of aliases now.
-+ 
-+-   $Id: interface.c,v 1.14 2001/02/10 19:31:15 pb Exp $
-++   $Id: interface.c,v 1.30 2005/08/23 22:46:51 ecki Exp $
-+  */
-+ 
-+ #include "config.h"
-+@@ -23,6 +23,7 @@
-+ #include <string.h>
-+ #include <unistd.h>
-+ #include <ctype.h>
-++#include <string.h>
-+ 
-+ #if HAVE_AFIPX
-+ #if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)
-+@@ -87,14 +88,20 @@ int procnetdev_vsn = 1;
-+ 
-+ int ife_short;
-+ 
-++int if_list_all = 0;	/* do we have requested the complete proc list, yet? */
-++
-+ static struct interface *int_list, *int_last;
-+ 
-+ static int if_readlist_proc(char *);
-+ 
-+-static struct interface *add_interface(char *name)
-++static struct interface *if_cache_add(char *name)
-+ {
-+     struct interface *ife, **nextp, *new;
-+ 
-++    if (!int_list)
-++    	int_last = NULL;
-++
-++    /* the cache is sorted, so if we hit a smaller if, exit */
-+     for (ife = int_last; ife; ife = ife->prev) {
-+ 	    int n = nstrcmp(ife->name, name); 
-+ 	    if (n == 0) 
-+@@ -104,7 +111,7 @@ static struct interface *add_interface(c
-+     }
-+     new(new); 
-+     safe_strncpy(new->name, name, IFNAMSIZ); 
-+-    nextp = ife ? &ife->next : &int_list;
-++    nextp = ife ? &ife->next : &int_list; // keep sorting
-+     new->prev = ife;
-+     new->next = *nextp; 
-+     if (new->next) 
-+@@ -117,19 +124,22 @@ static struct interface *add_interface(c
-+ 
-+ struct interface *lookup_interface(char *name)
-+ {
-+-    struct interface *ife = NULL;
-+-
-+-    if (if_readlist_proc(name) < 0) 
-+-	    return NULL; 
-+-    ife = add_interface(name); 
-+-    return ife;
-++   /* if we have read all, use it */
-++   if (if_list_all)
-++   	return if_cache_add(name);
-++
-++   /* otherwise we read a limited list */
-++   if (if_readlist_proc(name) < 0)
-++   	return NULL;
-++ 
-++   return if_cache_add(name);
-+ }
-+ 
-+ int for_all_interfaces(int (*doit) (struct interface *, void *), void *cookie)
-+ {
-+     struct interface *ife;
-+ 
-+-    if (!int_list && (if_readlist() < 0))
-++    if (!if_list_all && (if_readlist() < 0))
-+ 	return -1;
-+     for (ife = int_list; ife; ife = ife->next) {
-+ 	int err = doit(ife, cookie);
-+@@ -139,13 +149,15 @@ int for_all_interfaces(int (*doit) (stru
-+     return 0;
-+ }
-+ 
-+-int free_interface_list(void)
-++int if_cache_free(void)
-+ {
-+     struct interface *ife;
-+     while ((ife = int_list) != NULL) {
-+ 	int_list = ife->next;
-+ 	free(ife);
-+     }
-++    int_last = NULL;
-++    if_list_all = 0;
-+     return 0;
-+ }
-+ 
-+@@ -180,7 +192,7 @@ static int if_readconf(void)
-+ 	}
-+ 	if (ifc.ifc_len == sizeof(struct ifreq) * numreqs) {
-+ 	    /* assume it overflowed and try again */
-+-	    numreqs += 10;
-++	    numreqs *= 2;
-+ 	    continue;
-+ 	}
-+ 	break;
-+@@ -188,7 +200,7 @@ static int if_readconf(void)
-+ 
-+     ifr = ifc.ifc_req;
-+     for (n = 0; n < ifc.ifc_len; n += sizeof(struct ifreq)) {
-+-	add_interface(ifr->ifr_name);
-++	if_cache_add(ifr->ifr_name);
-+ 	ifr++;
-+     }
-+     err = 0;
-+@@ -198,7 +210,7 @@ out:
-+     return err;
-+ }
-+ 
-+-static char *get_name(char *name, char *p)
-++char *get_name(char *name, char *p)
-+ {
-+     while (isspace(*p))
-+ 	p++;
-+@@ -206,16 +218,19 @@ static char *get_name(char *name, char *
-+ 	if (isspace(*p))
-+ 	    break;
-+ 	if (*p == ':') {	/* could be an alias */
-+-	    char *dot = p, *dotname = name;
-+-	    *name++ = *p++;
-+-	    while (isdigit(*p))
-+-		*name++ = *p++;
-+-	    if (*p != ':') {	/* it wasn't, backup */
-+-		p = dot;
-+-		name = dotname;
-++		char *dot = p++;
-++ 		while (*p && isdigit(*p)) p++;
-++		if (*p == ':') {
-++			/* Yes it is, backup and copy it. */
-++			p = dot;
-++			*name++ = *p++;
-++			while (*p && isdigit(*p)) {
-++				*name++ = *p++;
-++			}
-++		} else {
-++			/* No, it isn't */
-++			p = dot;
-+ 	    }
-+-	    if (*p == '\0')
-+-		return NULL;
-+ 	    p++;
-+ 	    break;
-+ 	}
-+@@ -225,7 +240,7 @@ static char *get_name(char *name, char *
-+     return p;
-+ }
-+ 
-+-static int procnetdev_version(char *buf)
-++int procnetdev_version(char *buf)
-+ {
-+     if (strstr(buf, "compressed"))
-+ 	return 3;
-+@@ -234,12 +249,12 @@ static int procnetdev_version(char *buf)
-+     return 1;
-+ }
-+ 
-+-static int get_dev_fields(char *bp, struct interface *ife)
-++int get_dev_fields(char *bp, struct interface *ife)
-+ {
-+     switch (procnetdev_vsn) {
-+     case 3:
-+ 	sscanf(bp,
-+-	"%llu %llu %lu %lu %lu %lu %lu %lu %llu %llu %lu %lu %lu %lu %lu %lu",
-++	"%Lu %Lu %lu %lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu %lu",
-+ 	       &ife->stats.rx_bytes,
-+ 	       &ife->stats.rx_packets,
-+ 	       &ife->stats.rx_errors,
-+@@ -259,7 +274,7 @@ static int get_dev_fields(char *bp, stru
-+ 	       &ife->stats.tx_compressed);
-+ 	break;
-+     case 2:
-+-	sscanf(bp, "%llu %llu %lu %lu %lu %lu %llu %llu %lu %lu %lu %lu %lu",
-++	sscanf(bp, "%Lu %Lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu",
-+ 	       &ife->stats.rx_bytes,
-+ 	       &ife->stats.rx_packets,
-+ 	       &ife->stats.rx_errors,
-+@@ -277,7 +292,7 @@ static int get_dev_fields(char *bp, stru
-+ 	ife->stats.rx_multicast = 0;
-+ 	break;
-+     case 1:
-+-	sscanf(bp, "%llu %lu %lu %lu %lu %llu %lu %lu %lu %lu %lu",
-++	sscanf(bp, "%Lu %lu %lu %lu %lu %Lu %lu %lu %lu %lu %lu",
-+ 	       &ife->stats.rx_packets,
-+ 	       &ife->stats.rx_errors,
-+ 	       &ife->stats.rx_dropped,
-+@@ -300,22 +315,16 @@ static int get_dev_fields(char *bp, stru
-+ 
-+ static int if_readlist_proc(char *target)
-+ {
-+-    static int proc_read; 
-+     FILE *fh;
-+     char buf[512];
-+     struct interface *ife;
-+     int err;
-+ 
-+-    if (proc_read) 
-+-	    return 0; 
-+-    if (!target) 
-+-	    proc_read = 1;
-+-
-+     fh = fopen(_PATH_PROCNET_DEV, "r");
-+     if (!fh) {
-+ 		fprintf(stderr, _("Warning: cannot open %s (%s). Limited output.\n"),
-+ 			_PATH_PROCNET_DEV, strerror(errno)); 
-+-		return if_readconf();
-++		return -2;
-+ 	}	
-+     fgets(buf, sizeof buf, fh);	/* eat line */
-+     fgets(buf, sizeof buf, fh);
-+@@ -350,7 +359,7 @@ static int if_readlist_proc(char *target
-+     while (fgets(buf, sizeof buf, fh)) {
-+ 	char *s, name[IFNAMSIZ];
-+ 	s = get_name(name, buf);    
-+-	ife = add_interface(name);
-++	ife = if_cache_add(name);
-+ 	get_dev_fields(s, ife);
-+ 	ife->statistics_valid = 1;
-+ 	if (target && !strcmp(target,name))
-+@@ -359,7 +368,6 @@ static int if_readlist_proc(char *target
-+     if (ferror(fh)) {
-+ 	perror(_PATH_PROCNET_DEV);
-+ 	err = -1;
-+-	proc_read = 0; 
-+     }
-+ 
-+ #if 0
-+@@ -371,9 +379,16 @@ static int if_readlist_proc(char *target
-+ 
-+ int if_readlist(void) 
-+ { 
-+-    int err = if_readlist_proc(NULL); 
-+-    if (!err)
-+-	    err = if_readconf();
-++    /* caller will/should check not to call this too often 
-++     *   (i.e. only if if_list_all == 0 
-++     */
-++    int err = 0;
-++
-++    err |= if_readlist_proc(NULL); 
-++    err |= if_readconf();
-++
-++    if_list_all = 1;
-++
-+     return err;
-+ } 
-+ 
-+@@ -580,10 +595,10 @@ int do_if_print(struct interface *ife, v
-+ void ife_print_short(struct interface *ptr)
-+ {
-+     printf("%-5.5s ", ptr->name);
-+-    printf("%5d %3d", ptr->mtu, ptr->metric);
-++    printf("%5d %-2d ", ptr->mtu, ptr->metric);
-+     /* If needed, display the interface statistics. */
-+     if (ptr->statistics_valid) {
-+-	printf("%8llu %6lu %6lu %6lu",
-++	printf("%8llu %6lu %6lu %-6lu ",
-+ 	       ptr->stats.rx_packets, ptr->stats.rx_errors,
-+ 	       ptr->stats.rx_dropped, ptr->stats.rx_fifo_errors);
-+ 	printf("%8llu %6lu %6lu %6lu ",
-+@@ -636,9 +651,10 @@ void ife_print_long(struct interface *pt
-+     int hf;
-+     int can_compress = 0;
-+     unsigned long long rx, tx, short_rx, short_tx;
-+-    char Rext[5]="b";
-+-    char Text[5]="b";
-+-
-++    const char *Rext = "B";
-++    const char *Text = "B";
-++    static char flags[200];
-++    
-+ #if HAVE_AFIPX
-+     static struct aftype *ipxtype = NULL;
-+ #endif
-+@@ -670,32 +686,70 @@ void ife_print_long(struct interface *pt
-+     if (hw == NULL)
-+ 	hw = get_hwntype(-1);
-+ 
-+-    printf(_("%-9.9s Link encap:%s  "), ptr->name, hw->title);
-+-    /* For some hardware types (eg Ash, ATM) we don't print the 
-+-       hardware address if it's null.  */
-+-    if (hw->print != NULL && (! (hw_null_address(hw, ptr->hwaddr) &&
-+-				  hw->suppress_null_addr)))
-+-	printf(_("HWaddr %s  "), hw->print(ptr->hwaddr));
-+-#ifdef IFF_PORTSEL
-+-    if (ptr->flags & IFF_PORTSEL) {
-+-	printf(_("Media:%s"), if_port_text[ptr->map.port][0]);
-+-	if (ptr->flags & IFF_AUTOMEDIA)
-+-	    printf(_("(auto)"));
-+-    }
-++    sprintf(flags, "flags=%d<", ptr->flags);
-++    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short, too */
-++    if (ptr->flags == 0)
-++	strcat(flags,">");
-++    if (ptr->flags & IFF_UP)
-++	strcat(flags,_("UP,"));
-++    if (ptr->flags & IFF_BROADCAST)
-++	strcat(flags,_("BROADCAST,"));
-++    if (ptr->flags & IFF_DEBUG)
-++	strcat(flags,_("DEBUG,"));
-++    if (ptr->flags & IFF_LOOPBACK)
-++	strcat(flags,_("LOOPBACK,"));
-++    if (ptr->flags & IFF_POINTOPOINT)
-++	strcat(flags,_("POINTOPOINT,"));
-++    if (ptr->flags & IFF_NOTRAILERS)
-++	strcat(flags,_("NOTRAILERS,"));
-++    if (ptr->flags & IFF_RUNNING)
-++	strcat(flags,_("RUNNING,"));
-++    if (ptr->flags & IFF_NOARP)
-++	strcat(flags,_("NOARP,"));
-++    if (ptr->flags & IFF_PROMISC)
-++	strcat(flags,_("PROMISC,"));
-++    if (ptr->flags & IFF_ALLMULTI)
-++	strcat(flags,_("ALLMULTI,"));
-++    if (ptr->flags & IFF_SLAVE)
-++	strcat(flags,_("SLAVE,"));
-++    if (ptr->flags & IFF_MASTER)
-++	strcat(flags,_("MASTER,"));
-++    if (ptr->flags & IFF_MULTICAST)
-++	strcat(flags,_("MULTICAST,"));
-++#ifdef HAVE_DYNAMIC
-++    if (ptr->flags & IFF_DYNAMIC)
-++	strcat(flags,_("DYNAMIC,"));
-++#endif
-++    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short */
-++    if (flags[strlen(flags)-1] == ',')
-++      flags[strlen(flags)-1] = '>';
-++    else
-++      flags[strlen(flags)-1] = 0;
-++      
-++
-++    printf(_("%s: %s  mtu %d  metric %d"),
-++	   ptr->name, flags, ptr->mtu, ptr->metric ? ptr->metric : 1);
-++#ifdef SIOCSKEEPALIVE
-++    if (ptr->outfill || ptr->keepalive)
-++	printf(_("  outfill %d  keepalive %d"),
-++	       ptr->outfill, ptr->keepalive);
-+ #endif
-+     printf("\n");
-+ 
-++
-++
-+ #if HAVE_AFINET
-+     if (ptr->has_ip) {
-+-	printf(_("          %s addr:%s "), ap->name,
-++	printf(_("        %s %s"), ap->name,
-+ 	       ap->sprint(&ptr->addr, 1));
-+-	if (ptr->flags & IFF_POINTOPOINT) {
-+-	    printf(_(" P-t-P:%s "), ap->sprint(&ptr->dstaddr, 1));
-+-	}
-++	printf(_("  netmask %s"), ap->sprint(&ptr->netmask, 1));
-+ 	if (ptr->flags & IFF_BROADCAST) {
-+-	    printf(_(" Bcast:%s "), ap->sprint(&ptr->broadaddr, 1));
-++	    printf(_("  broadcast %s"), ap->sprint(&ptr->broadaddr, 1));
-++	}
-++	if (ptr->flags & IFF_POINTOPOINT) {
-++	    printf(_("  destination %s"), ap->sprint(&ptr->dstaddr, 1));
-+ 	}
-+-	printf(_(" Mask:%s\n"), ap->sprint(&ptr->netmask, 1));
-++	printf("\n");
-+     }
-+ #endif
-+ 
-+@@ -712,29 +766,30 @@ void ife_print_long(struct interface *pt
-+ 			addr6p[0], addr6p[1], addr6p[2], addr6p[3],
-+ 			addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
-+ 		inet6_aftype.input(1, addr6, (struct sockaddr *) &sap);
-+-		printf(_("          inet6 addr: %s/%d"),
-+-		 inet6_aftype.sprint((struct sockaddr *) &sap, 1), plen);
-+-		printf(_(" Scope:"));
-+-		switch (scope) {
-+-		case 0:
-+-		    printf(_("Global"));
-+-		    break;
-+-		case IPV6_ADDR_LINKLOCAL:
-+-		    printf(_("Link"));
-+-		    break;
-+-		case IPV6_ADDR_SITELOCAL:
-+-		    printf(_("Site"));
-+-		    break;
-+-		case IPV6_ADDR_COMPATv4:
-+-		    printf(_("Compat"));
-+-		    break;
-+-		case IPV6_ADDR_LOOPBACK:
-+-		    printf(_("Host"));
-+-		    break;
-+-		default:
-+-		    printf(_("Unknown"));
-++		printf(_("        %s %s  prefixlen %d"),
-++			inet6_aftype.name, 
-++			inet6_aftype.sprint((struct sockaddr *) &sap, 1), 
-++			plen);
-++		printf(_("  scopeid 0x%x"), scope);
-++
-++		flags[0] = '<'; flags[1] = 0;
-++		if (scope & IPV6_ADDR_COMPATv4) {
-++		    	strcat(flags, _("compat,"));
-++		    	scope -= IPV6_ADDR_COMPATv4;
-+ 		}
-+-		printf("\n");
-++		if (scope == 0)
-++			strcat(flags, _("global,"));
-++		if (scope & IPV6_ADDR_LINKLOCAL)
-++			strcat(flags, _("link,"));
-++		if (scope & IPV6_ADDR_SITELOCAL)
-++			strcat(flags, _("site,"));
-++		if (scope & IPV6_ADDR_LOOPBACK)
-++			strcat(flags, _("host,"));
-++		if (flags[strlen(flags)-1] == ',')
-++			flags[strlen(flags)-1] = '>';
-++		else
-++			flags[strlen(flags)-1] = 0;
-++		printf("%s\n", flags);
-+ 	    }
-+ 	}
-+ 	fclose(f);
-+@@ -747,17 +802,17 @@ void ife_print_long(struct interface *pt
-+ 
-+     if (ipxtype != NULL) {
-+ 	if (ptr->has_ipx_bb)
-+-	    printf(_("          IPX/Ethernet II addr:%s\n"),
-+-		   ipxtype->sprint(&ptr->ipxaddr_bb, 1));
-++	    printf(_("        %s Ethernet-II   %s\n"),
-++		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_bb, 1));
-+ 	if (ptr->has_ipx_sn)
-+-	    printf(_("          IPX/Ethernet SNAP addr:%s\n"),
-+-		   ipxtype->sprint(&ptr->ipxaddr_sn, 1));
-++	    printf(_("        %s Ethernet-SNAP %s\n"),
-++		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_sn, 1));
-+ 	if (ptr->has_ipx_e2)
-+-	    printf(_("          IPX/Ethernet 802.2 addr:%s\n"),
-+-		   ipxtype->sprint(&ptr->ipxaddr_e2, 1));
-++	    printf(_("        %s Ethernet802.2 %s\n"),
-++		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_e2, 1));
-+ 	if (ptr->has_ipx_e3)
-+-	    printf(_("          IPX/Ethernet 802.3 addr:%s\n"),
-+-		   ipxtype->sprint(&ptr->ipxaddr_e3, 1));
-++	    printf(_("        %s Ethernet802.3 %s\n"),
-++		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_e3, 1));
-+     }
-+ #endif
-+ 
-+@@ -766,7 +821,7 @@ void ife_print_long(struct interface *pt
-+ 	ddptype = get_afntype(AF_APPLETALK);
-+     if (ddptype != NULL) {
-+ 	if (ptr->has_ddp)
-+-	    printf(_("          EtherTalk Phase 2 addr:%s\n"), ddptype->sprint(&ptr->ddpaddr, 1));
-++	    printf(_("        %s %s\n"), ddptype->name, ddptype->sprint(&ptr->ddpaddr, 1));
-+     }
-+ #endif
-+ 
-+@@ -775,53 +830,30 @@ void ife_print_long(struct interface *pt
-+ 	ectype = get_afntype(AF_ECONET);
-+     if (ectype != NULL) {
-+ 	if (ptr->has_econet)
-+-	    printf(_("          econet addr:%s\n"), ectype->sprint(&ptr->ecaddr, 1));
-++	    printf(_("        %s %s\n"), ectype->name, ectype->sprint(&ptr->ecaddr, 1));
-+     }
-+ #endif
-+ 
-+-    printf("          ");
-+-    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short, too */
-+-    if (ptr->flags == 0)
-+-	printf(_("[NO FLAGS] "));
-+-    if (ptr->flags & IFF_UP)
-+-	printf(_("UP "));
-+-    if (ptr->flags & IFF_BROADCAST)
-+-	printf(_("BROADCAST "));
-+-    if (ptr->flags & IFF_DEBUG)
-+-	printf(_("DEBUG "));
-+-    if (ptr->flags & IFF_LOOPBACK)
-+-	printf(_("LOOPBACK "));
-+-    if (ptr->flags & IFF_POINTOPOINT)
-+-	printf(_("POINTOPOINT "));
-+-    if (ptr->flags & IFF_NOTRAILERS)
-+-	printf(_("NOTRAILERS "));
-+-    if (ptr->flags & IFF_RUNNING)
-+-	printf(_("RUNNING "));
-+-    if (ptr->flags & IFF_NOARP)
-+-	printf(_("NOARP "));
-+-    if (ptr->flags & IFF_PROMISC)
-+-	printf(_("PROMISC "));
-+-    if (ptr->flags & IFF_ALLMULTI)
-+-	printf(_("ALLMULTI "));
-+-    if (ptr->flags & IFF_SLAVE)
-+-	printf(_("SLAVE "));
-+-    if (ptr->flags & IFF_MASTER)
-+-	printf(_("MASTER "));
-+-    if (ptr->flags & IFF_MULTICAST)
-+-	printf(_("MULTICAST "));
-+-#ifdef HAVE_DYNAMIC
-+-    if (ptr->flags & IFF_DYNAMIC)
-+-	printf(_("DYNAMIC "));
-+-#endif
-+-    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short */
-+-    printf(_(" MTU:%d  Metric:%d"),
-+-	   ptr->mtu, ptr->metric ? ptr->metric : 1);
-+-#ifdef SIOCSKEEPALIVE
-+-    if (ptr->outfill || ptr->keepalive)
-+-	printf(_("  Outfill:%d  Keepalive:%d"),
-+-	       ptr->outfill, ptr->keepalive);
-++    /* For some hardware types (eg Ash, ATM) we don't print the 
-++       hardware address if it's null.  */
-++    if (hw->print != NULL && (! (hw_null_address(hw, ptr->hwaddr) &&
-++				  hw->suppress_null_addr)))
-++	printf(_("        %s %s"), hw->name, hw->print(ptr->hwaddr));
-++    else
-++	printf(_("        %s"), hw->name);
-++    if (ptr->tx_queue_len != -1)
-++    	printf(_("  txqueuelen %d"), ptr->tx_queue_len);
-++    printf("  (%s)\n", hw->title);
-++
-++#ifdef IFF_PORTSEL
-++    if (ptr->flags & IFF_PORTSEL) {
-++	printf(_("        media %s"), if_port_text[ptr->map.port][0]);
-++	if (ptr->flags & IFF_AUTOMEDIA)
-++	    printf(_("autoselect"));
-++    	printf("\n");
-++    }
-+ #endif
-+-    printf("\n");
-++
-+ 
-+     /* If needed, display the interface statistics. */
-+ 
-+@@ -830,55 +862,87 @@ void ife_print_long(struct interface *pt
-+ 	 *      not for the aliases, although strictly speaking they're shared
-+ 	 *      by all addresses.
-+ 	 */
-+-	printf("          ");
-+-
-+-	printf(_("RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"),
-+-	       ptr->stats.rx_packets, ptr->stats.rx_errors,
-+-	       ptr->stats.rx_dropped, ptr->stats.rx_fifo_errors,
-+-	       ptr->stats.rx_frame_errors);
-+-	if (can_compress)
-+-	    printf(_("             compressed:%lu\n"), ptr->stats.rx_compressed);
-+-
-+ 	rx = ptr->stats.rx_bytes;  
-+-	tx = ptr->stats.tx_bytes;
-+ 	short_rx = rx * 10;  
-++	if (rx > 1125899906842624ull) {
-++	    short_rx /= 1125899906842624ull;
-++	    Rext = "PiB";
-++	} else if (rx > 1099511627776ull) {
-++	    short_rx /= 1099511627776ull;
-++	    Rext = "TiB";
-++	} else if (rx > 1073741824ull) {
-++	    short_rx /= 1073741824ull;
-++	    Rext = "GiB";
-++	} else if (rx > 1048576) {
-++	    short_rx /= 1048576;
-++	    Rext = "MiB";
-++	} else if (rx > 1024) {
-++	    short_rx /= 1024;
-++	    Rext = "KiB";
-++	}
-++	tx = ptr->stats.tx_bytes;
-+ 	short_tx = tx * 10;
-+-	if (rx > 1048576) { short_rx /= 1048576;  strcpy(Rext, "Mb"); }
-+-	else if (rx > 1024) { short_rx /= 1024;  strcpy(Rext, "Kb"); }
-+-	if (tx > 1048576) { short_tx /= 1048576;  strcpy(Text, "Mb"); }
-+-	else if (tx > 1024) { short_tx /= 1024;  strcpy(Text, "Kb"); }
-+-
-+-	printf("          ");
-+-	printf(_("TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"),
-+-	       ptr->stats.tx_packets, ptr->stats.tx_errors,
-+-	       ptr->stats.tx_dropped, ptr->stats.tx_fifo_errors,
-+-	       ptr->stats.tx_carrier_errors);
-+-	printf(_("          collisions:%lu "), ptr->stats.collisions);
-+-	if (can_compress)
-+-	    printf(_("compressed:%lu "), ptr->stats.tx_compressed);
-+-	if (ptr->tx_queue_len != -1)
-+-	    printf(_("txqueuelen:%d "), ptr->tx_queue_len);
-+-	printf("\n          ");
-+-	printf(_("RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"),
-++	if (tx > 1125899906842624ull) {
-++	    short_tx /= 1125899906842624ull;
-++	    Text = "PiB";
-++	} else 	if (tx > 1099511627776ull) {
-++	    short_tx /= 1099511627776ull;
-++	    Text = "TiB";
-++	} else if (tx > 1073741824ull) {
-++	    short_tx /= 1073741824ull;
-++	    Text = "GiB";
-++	} else if (tx > 1048576) {
-++	    short_tx /= 1048576;
-++	    Text = "MiB";
-++	} else if (tx > 1024) {
-++	    short_tx /= 1024;
-++	    Text = "KiB";
-++	}
-++
-++	printf("        ");
-++	printf(_("RX packets %llu  bytes %llu (%lu.%lu %s)\n"), 
-++		ptr->stats.rx_packets, 
-+ 	       rx, (unsigned long)(short_rx / 10), 
-+-	       (unsigned long)(short_rx % 10), Rext, 
-+-	       tx, (unsigned long)(short_tx / 10), 
-+-	       (unsigned long)(short_tx % 10), Text);
-++	       (unsigned long)(short_rx % 10), Rext);
-++	if (can_compress) {
-++  	    printf("        ");
-++	    printf(_("RX compressed:%lu\n"), ptr->stats.rx_compressed);
-++	}
-++	printf("        ");
-++	printf(_("RX errors %lu  dropped %lu  overruns %lu  frame %lu\n"),
-++	       ptr->stats.rx_errors, ptr->stats.rx_dropped, 
-++	       ptr->stats.rx_fifo_errors, ptr->stats.rx_frame_errors);
-++
-++
-++	printf("        ");
-++	printf(_("TX packets %llu  bytes %llu (%lu.%lu %s)\n"),
-++		ptr->stats.tx_packets, 
-++	        tx, (unsigned long)(short_tx / 10), 
-++	        (unsigned long)(short_tx % 10), Text);
-++	if (can_compress) {
-++  	    printf("        ");
-++	    printf(_("TX compressed %lu\n"), ptr->stats.tx_compressed);
-++	}
-++	printf("        ");
-++	printf(_("TX errors %lu  dropped %lu overruns %lu  carrier %lu  collisions %lu\n"),
-++	       ptr->stats.tx_errors,
-++	       ptr->stats.tx_dropped, ptr->stats.tx_fifo_errors,
-++	       ptr->stats.tx_carrier_errors, ptr->stats.collisions);
-+     }
-+ 
-+     if ((ptr->map.irq || ptr->map.mem_start || ptr->map.dma ||
-+-	 ptr->map.base_addr)) {
-+-	printf("          ");
-++	 ptr->map.base_addr >= 0x100)) {
-++	printf("        device ");
-+ 	if (ptr->map.irq)
-+-	    printf(_("Interrupt:%d "), ptr->map.irq);
-++	    printf(_("interrupt %d  "), ptr->map.irq);
-+ 	if (ptr->map.base_addr >= 0x100)	/* Only print devices using it for 
-+ 						   I/O maps */
-+-	    printf(_("Base address:0x%x "), ptr->map.base_addr);
-++	    printf(_("base 0x%x  "), ptr->map.base_addr);
-+ 	if (ptr->map.mem_start) {
-+-	    printf(_("Memory:%lx-%lx "), ptr->map.mem_start, ptr->map.mem_end);
-++	    printf(_("memory 0x%lx-%lx  "), ptr->map.mem_start, ptr->map.mem_end);
-+ 	}
-+ 	if (ptr->map.dma)
-+-	    printf(_("DMA chan:%x "), ptr->map.dma);
-++	    printf(_("  dma 0x%x"), ptr->map.dma);
-+ 	printf("\n");
-+     }
-+     printf("\n");
-+Index: net-tools/lib/ipx.c
-+===================================================================
-+--- net-tools.orig/lib/ipx.c
-++++ net-tools/lib/ipx.c
-+@@ -133,6 +133,9 @@ static int IPX_input(int type, char *buf
-+     char *ep;
-+     int nbo;
-+ 
-++    if (!sai)
-++    	return (-1);
-++    	
-+     sai->sipx_family = AF_IPX;
-+     sai->sipx_network = htonl(0);
-+     sai->sipx_node[0] = sai->sipx_node[1] = sai->sipx_node[2] =
-+Index: net-tools/lib/ipx_gr.c
-+===================================================================
-+--- net-tools.orig/lib/ipx_gr.c
-++++ net-tools/lib/ipx_gr.c
-+@@ -38,21 +38,27 @@ int IPX_rprint(int options)
-+     char net[128], router_net[128];
-+     char router_node[128];
-+     int num;
-+-    FILE *fp = fopen(_PATH_PROCNET_IPX_ROUTE, "r");
-++    FILE *fp;
-+     struct aftype *ap;
-+     struct sockaddr sa;
-+ 
-+-    if ((ap = get_afntype(AF_IPX)) == NULL) {
-+-	EINTERN("lib/ipx_rt.c", "AF_IPX missing");
-+-	return (-1);
-+-    }
-++    fp = fopen(_PATH_PROCNET_IPX_ROUTE1, "r");
-+ 
-+     if (!fp) {
-+-        perror(_PATH_PROCNET_IPX_ROUTE);
-+-        printf(_("IPX not configured in this system.\n"));
-++        fp = fopen(_PATH_PROCNET_IPX_ROUTE2, "r");
-++    }
-++    
-++    if (!fp) {
-++        perror(NULL);
-++        printf(_("IPX routing not in file %s or %s found.\n"), _PATH_PROCNET_IPX_ROUTE1, _PATH_PROCNET_IPX_ROUTE2);
-+ 	return 1;
-+     }
-+ 
-++    if ((ap = get_afntype(AF_IPX)) == NULL) {
-++	EINTERN("lib/ipx_rt.c", "AF_IPX missing");
-++	return (-1);
-++    }
-++
-+     printf(_("Kernel IPX routing table\n"));	/* xxx */
-+     printf(_("Destination               Router Net                Router Node\n"));
-+ 
-+Index: net-tools/lib/irda.c
-+===================================================================
-+--- net-tools.orig/lib/irda.c
-++++ net-tools/lib/irda.c
-+@@ -1,13 +1,15 @@
-+ /*********************************************************************
-+  *                
-+  * Filename:      irda.c
-+- * Version:       0.1
-+- * Description:   A first attempt to make ifconfig understand IrDA
-++ * Version:       0.2
-++ * Description:   A second attempt to make ifconfig understand IrDA
-+  * Status:        Experimental.
-+  * Author:        Dag Brattli <dagb@cs.uit.no>
-+  * Created at:    Wed Apr 21 09:03:09 1999
-+  * Modified at:   Wed Apr 21 09:17:05 1999
-+  * Modified by:   Dag Brattli <dagb@cs.uit.no>
-++ * Modified at:   Wed May  1 11:51:44 CEST 2002
-++ * Modified by:   Christoph Bartelmus <christoph@bartelmus.de>
-+  * 
-+  *     This program is free software; you can redistribute it and/or 
-+  *     modify it under the terms of the GNU General Public License as 
-+@@ -59,9 +61,9 @@
-+  */
-+ static char *irda_print(unsigned char *ptr)
-+ {
-+-    static char buff[8];
-++    static char buff[12];
-+ 
-+-    sprintf(&buff[strlen(buff)], "%02x:%02x:%02x:%02x", ptr[3], ptr[2], 
-++    snprintf(buff, 12, "%02x:%02x:%02x:%02x", ptr[3], ptr[2], 
-+ 	    ptr[1], ptr[0]);
-+ 
-+     return (buff);
-+Index: net-tools/lib/net-features.h
-+===================================================================
-+--- net-tools.orig/lib/net-features.h
-++++ net-tools/lib/net-features.h
-+@@ -295,6 +295,13 @@ static char *Features =
-+ "-"
-+ #endif
-+ "HDLC/LAPB "
-++
-++#if HAVE_HWEUI64
-++"+"
-++#else
-++"-"
-++#endif
-++"EUI64 "
-+ ;
-+ 
-+ 
-+Index: net-tools/lib/nstrcmp.c
-+===================================================================
-+--- net-tools.orig/lib/nstrcmp.c
-++++ net-tools/lib/nstrcmp.c
-+@@ -1,34 +1,157 @@
-+ /* Copyright 1998 by Andi Kleen. Subject to the GPL. */
-+-/* $Id: nstrcmp.c,v 1.2 1998/11/15 20:11:38 freitag Exp $ */ 
-++/* rewritten by bernd eckenfels because of complicated alias semantic */
-++/* $Id: nstrcmp.c,v 1.4 2004/06/03 22:49:17 ecki Exp $ */ 
-+ #include <ctype.h>
-+ #include <stdlib.h>
-++#include <string.h>
-+ #include "util.h"
-+ 
-+-/* like strcmp(), but knows about numbers */
-+-int nstrcmp(const char *astr, const char *b)
-++
-++/* return numerical :999 suffix or null. sideeffect: replace ':' with \0 */
-++char* cutalias(char* name)
-+ {
-+-    const char *a = astr;
-++	int digit = 0;
-++	int pos;
-++	
-++	for(pos=strlen(name); pos>0; pos--)
-++	{
-++		if (name[pos-1]==':' && digit)
-++		{
-++			name[pos-1]='\0';
-++			return name+pos;
-++		}
-++		if (!isdigit(name[pos-1]))
-++			break;
-++		digit = 1;
-++	}
-++	return NULL;
-++}
-+ 
-+-    while (*a == *b) {
-+-	if (*a == '\0')
-+-	    return 0;
-+-	a++;
-+-	b++;
-+-    }
-+-    if (isdigit(*a)) {
-+-	if (!isdigit(*b))
-+-	    return -1;
-+-	while (a > astr) {
-+-	    a--;
-+-	    if (!isdigit(*a)) {
-+-		a++;
-+-		break;
-+-	    }
-+-	    if (!isdigit(*b))
-+-		return -1;
-+-	    b--;
-++
-++/* return index of last non digit or -1 if it does not end with digits */
-++int rindex_nondigit(char *name)
-++{
-++	int pos = strlen(name);
-++
-++	for(pos=strlen(name); pos>0; pos--)
-++	{
-++		if (!isdigit(name[pos-1]))
-++			return pos;
-+ 	}
-+-	return atoi(a) > atoi(b) ? 1 : -1;
-+-    }
-+-    return *a - *b;
-++	return 0;
-++}
-++
-++
-++/* like strcmp(), but knows about numbers and ':' alias suffix */
-++int nstrcmp(const char *ap, const char *bp)
-++{
-++	char *a = (char*)strdup(ap);
-++	char *b = (char*)strdup(bp);
-++	char *an, *bn;
-++	int av = 0, bv = 0;
-++	char *aalias=cutalias(a);
-++	char *balias=cutalias(b);
-++	int aindex=rindex_nondigit(a);
-++	int bindex=rindex_nondigit(b);
-++	int complen=(aindex<bindex)?aindex:bindex;
-++	int res = strncmp(a, b, complen);
-++
-++	if (res != 0)
-++		{ free(a); free(b); return res; }
-++		
-++	if (aindex > bindex)
-++		{ free(a); free(b); return 1; }
-++		
-++	if (aindex < bindex)
-++		{ free(a); free(b); return -1; }
-++		
-++	an = a+aindex;
-++	bn = b+bindex;
-++	
-++	av = atoi(an);
-++	bv = atoi(bn);
-++	
-++	if (av < bv)
-++		{ free(a); free(b); return -1; }
-++		
-++	if (av > bv)
-++		{ free(a); free(b); return 1; }
-++		
-++	av = -1;
-++	if (aalias != NULL)
-++		av = atoi(aalias);
-++	
-++	bv = -1;
-++	if (balias != NULL)
-++		bv = atoi(balias);
-++	
-++	free(a); free(b);
-++	
-++	if (av < bv)
-++		return -1;
-++		
-++	if (av > bv)
-++		return 1;
-++		
-++	return 0;
-++}
-++
-++
-++#ifdef NSTRCMP_TEST
-++
-++int cs(int s)
-++{
-++	if (s < 0) return -1;
-++	if (s > 0) return 1;
-++	return 0;
-++}
-++
-++
-++int dotest(char* a, char* b, int exp)
-++{
-++	int res = nstrcmp(a, b);
-++	int err = (cs(res) != cs(exp));
-++	printf("nstrcmp(\"%s\", \"%s\")=%d %d %s\n", a, b, res, exp, err?"WRONG":"OK");
-++	return err;
-+ }
-++
-++int main()
-++{
-++	int err = 0;
-++	
-++	err |= dotest("eth1", "eth1", 0);
-++	err |= dotest("eth0:1", "eth0:1", 0);
-++	err |= dotest("lan", "lan", 0);
-++	err |= dotest("100", "100", 0);
-++	err |= dotest("", "", 0);
-++	err |= dotest(":", ":", 0);
-++	err |= dotest("a:b:c", "a:b:c", 0);
-++	err |= dotest("a:", "a:", 0);
-++	err |= dotest(":a", ":a", 0);
-++
-++	err |= dotest("a", "aa", -1);	
-++	err |= dotest("eth0", "eth1", -1);
-++	err |= dotest("eth1", "eth20", -1);
-++	err |= dotest("eth20", "eth100", -1);
-++	err |= dotest("eth1", "eth13", -1);
-++	err |= dotest("eth", "eth2", -1);
-++	err |= dotest("eth0:1", "eth0:2", -1);
-++	err |= dotest("eth1:10", "eth13:10", -1);
-++	err |= dotest("eth1:1", "eth1:13", -1);
-++	err |= dotest("a", "a:", -1);
-++	
-++	err |= dotest("aa", "a", 1);
-++	err |= dotest("eth2", "eth1", 1);
-++	err |= dotest("eth13", "eth1", 1);	
-++	err |= dotest("eth2", "eth", 1);
-++	err |= dotest("eth2:10", "eth2:1", 1);
-++	err |= dotest("eth2:5", "eth2:4", 1);
-++	err |= dotest("eth3:2", "eth2:3", 1);
-++	err |= dotest("eth13:1", "eth1:0", 1);
-++	err |= dotest("a:", "a", 1);
-++	err |= dotest("a1b12", "a1b2", 1);
-++
-++	return err;
-++}
-++
-++#endif
-+Index: net-tools/lib/pathnames.h
-+===================================================================
-+--- net-tools.orig/lib/pathnames.h
-++++ net-tools/lib/pathnames.h
-+@@ -1,4 +1,3 @@
-+-
-+ /*
-+  * lib/pathnames.h    This file contains the definitions of the path 
-+  *                      names used by the NET-LIB.
-+@@ -29,8 +28,10 @@
-+ #define _PATH_PROCNET_NR_NODES		"/proc/net/nr_nodes"
-+ #define _PATH_PROCNET_ARP		"/proc/net/arp"
-+ #define _PATH_PROCNET_AX25		"/proc/net/ax25"
-+-#define _PATH_PROCNET_IPX		"/proc/net/ipx"
-+-#define _PATH_PROCNET_IPX_ROUTE		"/proc/net/ipx_route"
-++#define _PATH_PROCNET_IPX_SOCKET1	"/proc/net/ipx/socket"
-++#define _PATH_PROCNET_IPX_SOCKET2	"/proc/net/ipx"
-++#define _PATH_PROCNET_IPX_ROUTE1	"/proc/net/ipx/route"
-++#define _PATH_PROCNET_IPX_ROUTE2	"/proc/net/ipx_route"
-+ #define _PATH_PROCNET_ATALK		"/proc/net/appletalk"
-+ #define _PATH_PROCNET_IP_BLK		"/proc/net/ip_block"
-+ #define _PATH_PROCNET_IP_FWD		"/proc/net/ip_forward"
-+@@ -45,6 +46,7 @@
-+ #define _PATH_PROCNET_X25              "/proc/net/x25"
-+ #define _PATH_PROCNET_X25_ROUTE                "/proc/net/x25_routes"
-+ #define _PATH_PROCNET_DEV_MCAST		"/proc/net/dev_mcast"
-++#define _PATH_PROCNET_ATALK_ROUTE	"/proc/net/atalk_route"
-+ 
-+ /* pathname for the netlink device */
-+ #define _PATH_DEV_ROUTE	"/dev/route"
-+Index: net-tools/lib/proc.c
-+===================================================================
-+--- net-tools.orig/lib/proc.c
-++++ net-tools/lib/proc.c
-+@@ -1,11 +1,12 @@
-+ /* Tolerant /proc file parser. Copyright 1998 Andi Kleen */
-+-/* $Id: proc.c,v 1.4 1999/01/05 20:54:00 philip Exp $ */ 
-++/* $Id: proc.c,v 1.5 2007/12/01 18:44:57 ecki Exp $ */ 
-+ /* Fixme: cannot currently cope with removed fields */ 
-+ 
-+ #include <string.h>
-+ #include <stdarg.h>
-+ #include <stdio.h>
-+ #include <ctype.h>
-++#include <unistd.h>
-+ 
-+ /* Caller must free return string. */
-+ 
-+@@ -72,3 +73,22 @@ int proc_guess_fmt(char *name, FILE *fh,
-+     va_end(ap);
-+     return flag;
-+ }
-++
-++
-++FILE *proc_fopen(const char *name)
-++{
-++    static char *buffer;
-++    static size_t pagesz;
-++    FILE *fd = fopen(name, "r");
-++
-++    if (fd == NULL)
-++      return NULL;
-++      
-++    if (!buffer) {
-++      pagesz = getpagesize();
-++      buffer = malloc(pagesz);
-++    }
-++    
-++    setvbuf(fd, buffer, _IOFBF, pagesz);
-++    return fd;
-++}
-+Index: net-tools/lib/proc.h
-+===================================================================
-+--- net-tools.orig/lib/proc.h
-++++ net-tools/lib/proc.h
-+@@ -1,5 +1,7 @@
-+-
-+-
-+-/* Generate a suitable scanf format for a column title line */
-++/* 
-++ * prototypes for proc.c
-++ */
-+ char *proc_gen_fmt(char *name, int more, FILE * fh,...);
-+ int   proc_guess_fmt(char *name, FILE* fh,...);
-++FILE *proc_fopen(const char *name);
-++
-+Index: net-tools/lib/tr.c
-+===================================================================
-+--- net-tools.orig/lib/tr.c
-++++ net-tools/lib/tr.c
-+@@ -2,7 +2,7 @@
-+  * lib/tr.c   This file contains an implementation of the "Tokenring"
-+  *              support functions.
-+  *
-+- * Version:     $Id: tr.c,v 1.8 2000/02/02 08:56:30 freitag Exp $
-++ * Version:     $Id: tr.c,v 1.9 2005/05/16 03:15:12 ecki Exp $
-+  *
-+  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+  *              Copyright 1993 MicroWalt Corporation
-+@@ -30,8 +30,14 @@
-+ #include "net-support.h"
-+ #include "pathnames.h"
-+ #include "intl.h"
-++#include "util.h"
-+ 
-++
-++/* actual definition at the end of file */
-+ extern struct hwtype tr_hwtype;
-++#ifdef ARPHRD_IEEE802_TR
-++extern struct hwtype tr_hwtype1;
-++#endif
-+ 
-+ static char *pr_tr(unsigned char *ptr)
-+ {
-+@@ -42,7 +48,7 @@ static char *pr_tr(unsigned char *ptr)
-+ 	     (ptr[3] & 0377), (ptr[4] & 0377), (ptr[5] & 0377)
-+ 	);
-+     return (buff);
-+-}
-++      }
-+ 
-+ 
-+ static int in_tr(char *bufp, struct sockaddr *sap)
-+@@ -51,7 +57,17 @@ static int in_tr(char *bufp, struct sock
-+     char c, *orig;
-+     int i, val;
-+ 
-++#ifdef ARPHRD_IEEE802_TR
-++    if (kernel_version() < KRELEASE(2,3,30)) { 
-++        sap->sa_family = tr_hwtype.type;
-++    } else { 
-++        sap->sa_family = tr_hwtype1.type;
-++    } 	
-++#else
-+     sap->sa_family = tr_hwtype.type;
-++    #warning "Limited functionality, no support for ARPHRD_IEEE802_TR (old kernel headers?)"
-++#endif
-++
-+     ptr = sap->sa_data;
-+ 
-+     i = 0;
-+Index: net-tools/lib/util-ank.c
-+===================================================================
-+--- net-tools.orig/lib/util-ank.c
-++++ net-tools/lib/util-ank.c
-+@@ -293,7 +293,7 @@ int inet_addr_match(inet_prefix *a, inet
-+ 	return 0;
-+ }
-+ 
-+-const char *format_host(int af, void *addr, __u8 *abuf, int alen)
-++const char *format_host(int af, void *addr, char *abuf, int alen)
-+ {
-+ #ifdef RESOLVE_HOSTNAMES
-+ 	if (resolve_hosts) {
-+Index: net-tools/lib/util.h
-+===================================================================
-+--- net-tools.orig/lib/util.h
-++++ net-tools/lib/util.h
-+@@ -14,3 +14,6 @@ int nstrcmp(const char *, const char *);
-+ 
-+ char *safe_strncpy(char *dst, const char *src, size_t size); 
-+ 
-++
-++#define netmin(a,b) ((a)<(b) ? (a) : (b))
-++#define netmax(a,b) ((a)>(b) ? (a) : (b))
-+Index: net-tools/lib/x25_sr.c
-+===================================================================
-+--- net-tools.orig/lib/x25_sr.c
-++++ net-tools/lib/x25_sr.c
-+@@ -67,7 +67,7 @@ static int X25_setroute(int action, int 
-+   strcpy(target, *args++);
-+ 
-+   /* Clean out the x25_route_struct structure. */
-+-  memset((char *) &rt, 0, sizeof(struct x25_route_struct));
-++  memset((char *) &rt, 0, sizeof(rt));
-+ 
-+ 
-+   if ((sigdigits = x25_aftype.input(0, target, (struct sockaddr *)&sx25)) < 0) {
-+@@ -76,8 +76,8 @@ static int X25_setroute(int action, int 
-+   }
-+   rt.sigdigits=sigdigits;
-+ 
-+-  /* x25_route_struct.address isn't type struct sockaddr_x25, Why? */
-+-  memcpy(&rt.address, &sx25.sx25_addr, sizeof(x25_address));
-++  /* this works with 2.4 and 2.6 headers struct x25_address vs. typedef */
-++  memcpy(&rt.address, &sx25.sx25_addr, sizeof(sx25.sx25_addr));
-+ 
-+   while (*args) {
-+ 	if (!strcmp(*args,"device") || !strcmp(*args,"dev")) {
-+Index: net-tools/lib/eui64.c
-+===================================================================
-+--- /dev/null
-++++ net-tools/lib/eui64.c
-+@@ -0,0 +1,155 @@
-++/*
-++ * lib/eui64.c  This file contains support for generic EUI-64 hw addressing
-++ *
-++ * Version:     $Id: eui64.c,v 1.1 2001/11/12 02:12:05 ecki Exp $
-++ *
-++ * Author:      Daniel Stodden <stodden@in.tum.de>
-++ *              Copyright 2001 Daniel Stodden
-++ *
-++ *              blueprinted from ether.c 
-++ *              Copyright 1993 MicroWalt Corporation
-++ *
-++ *              This program is free software; you can redistribute it
-++ *              and/or  modify it under  the terms of  the GNU General
-++ *              Public  License as  published  by  the  Free  Software
-++ *              Foundation;  either  version 2 of the License, or  (at
-++ *              your option) any later version.
-++ */
-++#include "config.h"
-++
-++#if HAVE_HWEUI64
-++
-++#include <sys/types.h>
-++#include <sys/ioctl.h>
-++#include <sys/socket.h>
-++#include <net/if_arp.h>
-++#include <stdlib.h>
-++#include <stdio.h>
-++#include <ctype.h>
-++#include <errno.h>
-++#include <fcntl.h>
-++#include <string.h>
-++#include <termios.h>
-++#include <unistd.h>
-++#include "net-support.h"
-++#include "pathnames.h"
-++#include "intl.h"
-++
-++/*
-++ * EUI-64 constants
-++ */
-++
-++#define EUI64_ALEN	8
-++
-++#ifndef ARPHRD_EUI64
-++#define ARPHRD_EUI64	27
-++#warning "ARPHRD_EUI64 not defined in <net/if_arp.h>. Using private value 27"
-++#endif
-++
-++struct hwtype eui64_hwtype;
-++
-++/* Display an EUI-64 address in readable format. */
-++static char *pr_eui64( unsigned char *ptr )
-++{
-++	static char buff[64];
-++
-++	snprintf(buff, sizeof(buff), "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X",
-++		 (ptr[0] & 0377), (ptr[1] & 0377), (ptr[2] & 0377), (ptr[3] & 0377), 
-++		 (ptr[4] & 0377), (ptr[5] & 0377), (ptr[6] & 0377), (ptr[7] & 0377)
-++		);
-++	return (buff);
-++}
-++
-++/* Start the PPP encapsulation on the file descriptor. */
-++static int in_eui64( char *bufp, struct sockaddr *sap )
-++{
-++	unsigned char *ptr;
-++	char c, *orig;
-++	int i;
-++	unsigned val;
-++
-++	sap->sa_family = eui64_hwtype.type;
-++	ptr = sap->sa_data;
-++
-++	i = 0;
-++	orig = bufp;
-++	
-++	while ((*bufp != '\0') && (i < EUI64_ALEN)) {
-++		val = 0;
-++		c = *bufp++;
-++		if (isdigit(c))
-++			val = c - '0';
-++		else if (c >= 'a' && c <= 'f')
-++			val = c - 'a' + 10;
-++		else if (c >= 'A' && c <= 'F')
-++			val = c - 'A' + 10;
-++		else {
-++#ifdef DEBUG
-++			fprintf( stderr, _("in_eui64(%s): invalid eui64 address!\n"), 
-++				 orig );
-++#endif
-++			errno = EINVAL;
-++			return (-1);
-++		}
-++
-++		val <<= 4;
-++		c = *bufp;
-++		if (isdigit(c))
-++			val |= c - '0';
-++		else if (c >= 'a' && c <= 'f')
-++			val |= c - 'a' + 10;
-++		else if (c >= 'A' && c <= 'F')
-++			val |= c - 'A' + 10;
-++		else if (c == ':' || c == 0)
-++			val >>= 4;
-++		else {
-++#ifdef DEBUG
-++			fprintf( stderr, _("in_eui64(%s): invalid eui64 address!\n"), 
-++				 orig );
-++#endif
-++			errno = EINVAL;
-++			return (-1);
-++		}
-++
-++		if (c != 0)
-++			bufp++;
-++
-++		*ptr++ = (unsigned char) (val & 0377);
-++		i++;
-++		
-++		/* We might get a semicolon here - not required. */
-++		if (*bufp == ':') {
-++			if (i == EUI64_ALEN) {
-++#ifdef DEBUG
-++				fprintf(stderr, _("in_eui64(%s): trailing : ignored!\n"),
-++					orig)
-++#endif
-++					; /* nothing */
-++			}
-++			bufp++;
-++		}
-++	}
-++
-++	/* That's it.  Any trailing junk? */
-++	if ((i == EUI64_ALEN) && (*bufp != '\0')) {
-++#ifdef DEBUG
-++		fprintf(stderr, _("in_eui64(%s): trailing junk!\n"), orig);
-++		errno = EINVAL;
-++		return (-1);
-++#endif
-++	}
-++#ifdef DEBUG
-++	fprintf(stderr, "in_eui64(%s): %s\n", orig, pr_eui64(sap->sa_data));
-++#endif
-++
-++    return (0);
-++}
-++
-++struct hwtype eui64_hwtype =
-++{
-++	"eui64", NULL, /*"EUI-64 addressing", */ ARPHRD_EUI64, EUI64_ALEN,
-++	pr_eui64, in_eui64, NULL, 0
-++};
-++
-++
-++#endif				/* HAVE_EUI64 */
-+Index: net-tools/lib/ib.c
-+===================================================================
-+--- /dev/null
-++++ net-tools/lib/ib.c
-+@@ -0,0 +1,147 @@
-++/*
-++ * lib/ib.c        This file contains an implementation of the "Infiniband"
-++ *              support functions.
-++ *
-++ * Version:     $Id: ib.c,v 1.1 2005/02/06 11:00:47 tduffy Exp $
-++ *
-++ * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-++ *              Copyright 1993 MicroWalt Corporation
-++ *		Tom Duffy <tduffy@sun.com>
-++ *
-++ *              This program is free software; you can redistribute it
-++ *              and/or  modify it under  the terms of  the GNU General
-++ *              Public  License as  published  by  the  Free  Software
-++ *              Foundation;  either  version 2 of the License, or  (at
-++ *              your option) any later version.
-++ */
-++#include "config.h"
-++
-++#if HAVE_HWIB
-++#include <sys/types.h>
-++#include <sys/socket.h>
-++#include <net/if_arp.h>
-++#include <linux/if_infiniband.h>
-++#include <stdlib.h>
-++#include <stdio.h>
-++#include <errno.h>
-++#include <ctype.h>
-++#include <string.h>
-++#include <unistd.h>
-++#include "net-support.h"
-++#include "pathnames.h"
-++#include "intl.h"
-++#include "util.h"
-++
-++extern struct hwtype ib_hwtype;
-++
-++
-++/* Display an InfiniBand address in readable format. */
-++static char *pr_ib(unsigned char *ptr)
-++{
-++    static char buff[128];
-++    char *pos;
-++    unsigned int i;
-++
-++    pos = buff;
-++    for (i = 0; i < INFINIBAND_ALEN; i++) {
-++	pos += sprintf(pos, "%02X:", (*ptr++ & 0377));
-++    }
-++    buff[strlen(buff) - 1] = '\0';
-++
-++    /* snprintf(buff, sizeof(buff), "%02X:%02X:%02X:%02X:%02X:%02X",
-++	     (ptr[0] & 0377), (ptr[1] & 0377), (ptr[2] & 0377),
-++	     (ptr[3] & 0377), (ptr[4] & 0377), (ptr[5] & 0377)
-++	);
-++    */
-++    return (buff);
-++}
-++
-++
-++/* Input an Infiniband address and convert to binary. */
-++static int in_ib(char *bufp, struct sockaddr *sap)
-++{
-++    unsigned char *ptr;
-++    char c, *orig;
-++    int i;
-++    unsigned val;
-++
-++    sap->sa_family = ib_hwtype.type;
-++    ptr = sap->sa_data;
-++
-++    i = 0;
-++    orig = bufp;
-++    while ((*bufp != '\0') && (i < INFINIBAND_ALEN)) {
-++	val = 0;
-++	c = *bufp++;
-++	if (isdigit(c))
-++	    val = c - '0';
-++	else if (c >= 'a' && c <= 'f')
-++	    val = c - 'a' + 10;
-++	else if (c >= 'A' && c <= 'F')
-++	    val = c - 'A' + 10;
-++	else {
-++#ifdef DEBUG
-++	    fprintf(stderr, _("in_ib(%s): invalid infiniband address!\n"), orig);
-++#endif
-++	    errno = EINVAL;
-++	    return (-1);
-++	}
-++	val <<= 4;
-++	c = *bufp;
-++	if (isdigit(c))
-++	    val |= c - '0';
-++	else if (c >= 'a' && c <= 'f')
-++	    val |= c - 'a' + 10;
-++	else if (c >= 'A' && c <= 'F')
-++	    val |= c - 'A' + 10;
-++	else if (c == ':' || c == 0)
-++	    val >>= 4;
-++	else {
-++#ifdef DEBUG
-++	    fprintf(stderr, _("in_ib(%s): invalid infiniband address!\n"), orig);
-++#endif
-++	    errno = EINVAL;
-++	    return (-1);
-++	}
-++	if (c != 0)
-++	    bufp++;
-++	*ptr++ = (unsigned char) (val & 0377);
-++	i++;
-++
-++	/* We might get a semicolon here - not required. */
-++	if (*bufp == ':') {
-++	    if (i == INFINIBAND_ALEN) {
-++#ifdef DEBUG
-++		fprintf(stderr, _("in_ib(%s): trailing : ignored!\n"),
-++			orig)
-++#endif
-++		    ;		/* nothing */
-++	    }
-++	    bufp++;
-++	}
-++    }
-++
-++    /* That's it.  Any trailing junk? */
-++    if ((i == INFINIBAND_ALEN) && (*bufp != '\0')) {
-++#ifdef DEBUG
-++	fprintf(stderr, _("in_ib(%s): trailing junk!\n"), orig);
-++	errno = EINVAL;
-++	return (-1);
-++#endif
-++    }
-++#ifdef DEBUG
-++    fprintf(stderr, "in_ib(%s): %s\n", orig, pr_ib(sap->sa_data));
-++#endif
-++
-++    return (0);
-++}
-++
-++
-++struct hwtype ib_hwtype =
-++{
-++    "infiniband", NULL, ARPHRD_INFINIBAND, INFINIBAND_ALEN,
-++    pr_ib, in_ib, NULL
-++};
-++
-++
-++#endif				/* HAVE_HWIB */
---- net-tools-1.60.orig/debian/patches/CVS-20051204-slttach.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20051204-slttach.c_sync.patch
-@@ -0,0 +1,43 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.11 - Sun Dec 4 05:15:36 2005 UTC by ecki
-+use file version
-+
-+Revision 1.10 - Sun Dec 4 05:14:08 2005 UTC by ecki
-+make slattach 3-wire -L mode work (no RTSCTS) (Debian Bug #175743)
-+
-+Index: net-tools/slattach.c
-+===================================================================
-+--- net-tools.orig/slattach.c
-++++ net-tools/slattach.c
-+@@ -73,7 +73,7 @@
-+ 
-+ 
-+ const char *Release = RELEASE,
-+-	   *Version = "@(#) slattach 1.21 (1999-11-21)",
-++	   *Version = "$Id: slattach.c,v 1.11 2005/12/04 05:15:36 ecki Exp $",
-+ 	   *Signature = "net-tools, Fred N. van Kempen et al.";
-+ 
-+ 
-+@@ -115,7 +115,7 @@ int		opt_h = 0;		/* "hangup" on carrier 
-+ int		opt_k = 0;		/* "keepalive" value		*/
-+ #endif
-+ int		opt_l = 0;		/* "lock it" flag		*/
-+-int		opt_L = 0;		/* clocal flag			*/
-++int		opt_L = 0;		/* 3-wire mode flag		*/
-+ int		opt_m = 0;		/* "set RAW mode" flag		*/
-+ int		opt_n = 0;		/* "set No Mesg" flag		*/
-+ #ifdef SIOCSOUTFILL
-+@@ -342,9 +342,11 @@ tty_set_raw(struct termios *tty)
-+   tty->c_oflag = (0);				/* output flags		*/
-+   tty->c_lflag = (0);				/* local flags		*/
-+   speed = (tty->c_cflag & CBAUD);		/* save current speed	*/
-+-  tty->c_cflag = (CRTSCTS | HUPCL | CREAD);	/* UART flags		*/
-++  tty->c_cflag = (HUPCL | CREAD);		/* UART flags		*/
-+   if (opt_L) 
-+ 	tty->c_cflag |= CLOCAL;
-++  else
-++	tty->c_cflag |= CRTSCTS;
-+   tty->c_cflag |= speed;			/* restore speed	*/
-+   return(0);
-+ }
---- net-tools-1.60.orig/debian/patches/CVS-20071202-rarp.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20071202-rarp.c_sync.patch
-@@ -0,0 +1,41 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.9 - Sun Dec 2 02:19:52 2007 UTC by ecki
-+more backoff
-+
-+Revision 1.8 - Sat Dec 1 19:36:55 2007 UTC by ecki
-+backoff proc_fopen usage from etherfile.
-+
-+Revision 1.7 - Sat Dec 1 18:51:09 2007 UTC by ecki
-+Page aligned fopen buffer
-+
-+Index: net-tools/rarp.c
-+===================================================================
-+--- net-tools.orig/rarp.c
-++++ net-tools/rarp.c
-+@@ -3,7 +3,7 @@
-+  *              that maintains the kernel's RARP cache.  It is derived
-+  *              from Fred N. van Kempen's arp command.
-+  *
-+- * Version:	$Id: rarp.c,v 1.6 2001/04/08 17:05:05 pb Exp $
-++ * Version:	$Id: rarp.c,v 1.9 2007/12/02 02:19:52 ecki Exp $
-+  *
-+  * Usage:       rarp -d hostname                      Delete entry
-+  *              rarp -s hostname ethernet_address     Add entry
-+@@ -40,6 +40,7 @@
-+ #include "net-support.h"
-+ #include "version.h"
-+ #include "pathnames.h"
-++#include "proc.h"
-+ 
-+ static char no_rarp_message[] = N_("This kernel does not support RARP.\n");
-+ 
-+@@ -154,7 +155,7 @@ static int rarp_file(int fd, const char 
-+ 
-+ static int display_cache(void)
-+ {
-+-    FILE *fd = fopen(_PATH_PROCNET_RARP, "r");
-++    FILE *fd = proc_fopen(_PATH_PROCNET_RARP);
-+     char buffer[256];
-+     if (fd == NULL) {
-+ 	if (errno == ENOENT)
---- net-tools-1.60.orig/debian/patches/CVS-20081003-statistics.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20081003-statistics.c_sync.patch
-@@ -0,0 +1,385 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.21 - Fri Oct 3 00:05:20 2008 UTC by ecki
-+Enable netstat -s for IPv6 (Debian Bug #453859 from Varun Chandramohan)
-+
-+Revision 1.20 - Sat Dec 1 18:44:56 2007 UTC by ecki
-+Faster pagesize aligned fopen for netstat -s (Eric Dumazet)
-+
-+Revision 1.19 - Sat Dec 1 18:29:05 2007 UTC by ecki
-+Better netstat -s error handling and larger buffers
-+
-+Revision 1.18 - Wed Feb 12 03:30:57 2003 UTC by ak
-+Add text for two new TCP statistics and fix some existing descriptions
-+
-+Revision 1.17 - Sun Apr 28 15:41:01 2002 UTC by ak
-+Fix some counter descriptions.  Noted by Jamal Hadi.
-+
-+Revision 1.16 - Wed Oct 24 11:57:05 2001 UTC by ak
-+(Finally) update netstat -s for 2.4 statistics.
-+
-+Revision 1.15 - Fri Oct 19 09:28:01 2001 UTC by ak
-+Only print unknown statistics when their counter is > 0.
-+
-+Index: net-tools/statistics.c
-+===================================================================
-+--- net-tools.orig/statistics.c
-++++ net-tools/statistics.c
-+@@ -1,6 +1,6 @@
-+ /*
-+  * Copyright 1997,1999,2000 Andi Kleen. Subject to the GPL. 
-+- * $Id: statistics.c,v 1.14 2001/02/02 18:01:23 pb Exp $
-++ * $Id: statistics.c,v 1.21 2008/10/03 00:05:20 ecki Exp $
-+  * 19980630 - i18n - Arnaldo Carvalho de Melo <acme@conectiva.com.br> 
-+  * 19981113 - i18n fixes - Arnaldo Carvalho de Melo <acme@conectiva.com.br> 
-+  * 19990101 - added net/netstat, -t, -u, -w supprt - Bernd Eckenfels 
-+@@ -11,6 +11,7 @@
-+ #include <string.h>
-+ #include "config.h"
-+ #include "intl.h"
-++#include "proc.h"
-+ 
-+ /* #define WARN 1 */
-+ 
-+@@ -83,6 +84,32 @@ struct entry Iptab[] =
-+     {"FragCreates", N_("%u fragments created"), opt_number}
-+ };
-+ 
-++struct entry Ip6tab[] =
-++{
-++    {"Ip6InReceives", N_("%u total packets received"), number},
-++    {"Ip6InHdrErrors", N_("%u with invalid headers"), opt_number},
-++    {"Ip6InTooBigErrors", N_("%u with packets too big"), opt_number},
-++    {"Ip6InNoRoutes", N_("%u incoming packets with no route"), opt_number},
-++    {"Ip6InAddrErrors", N_("%u with invalid addresses"), opt_number},
-++    {"Ip6InUnknownProtos", N_("%u with unknown protocol"), opt_number},
-++    {"Ip6InTruncatedPkts", N_("%u with truncated packets"), opt_number},
-++    {"Ip6InDiscards", N_("%u incoming packets discarded"), number},
-++    {"Ip6InDelivers", N_("%u incoming packets delivered"), number},
-++    {"Ip6OutForwDatagrams", N_("%u forwarded"), number},
-++    {"Ip6OutRequests", N_("%u requests sent out"), number},     /*? */
-++    {"Ip6OutDiscards", N_("%u outgoing packets dropped"), opt_number},
-++    {"Ip6OutNoRoutes", N_("%u dropped because of missing route"), opt_number},
-++    {"Ip6ReasmTimeout", N_("%u fragments dropped after timeout"), opt_number},
-++    {"Ip6ReasmReqds", N_("%u reassemblies required"), opt_number}, /* ? */
-++    {"Ip6ReasmOKs", N_("%u packets reassembled ok"), opt_number},
-++    {"Ip6ReasmFails", N_("%u packet reassembles failed"), opt_number},
-++    {"Ip6FragOKs", N_("%u fragments received ok"), opt_number},
-++    {"Ip6FragFails", N_("%u fragments failed"), opt_number},
-++    {"Ip6FragCreates", N_("%u fragments created"), opt_number},
-++    {"Ip6InMcastPkts", N_("%u incoming multicast packets"), opt_number},
-++    {"Ip6OutMcastPkts", N_("%u outgoing multicast packets"), opt_number}
-++};
-++
-+ struct entry Icmptab[] =
-+ {
-+     {"InMsgs", N_("%u ICMP messages received"), number},
-+@@ -113,6 +140,41 @@ struct entry Icmptab[] =
-+     {"OutAddrMaskReps", N_("address mask replies: %u"), i_outp_icmp | I_TITLE},
-+ };
-+ 
-++struct entry Icmp6tab[] =
-++{
-++    {"Icmp6InMsgs", N_("%u ICMP messages received"), number},
-++    {"Icmp6InErrors", N_("%u input ICMP message failed."), number},
-++    {"Icmp6InDestUnreachs", N_("destination unreachable: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InPktTooBigs", N_("packets too big: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InTimeExcds", N_("received ICMPv6 time exceeded: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InParmProblems", N_("parameter problem: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InEchos", N_("echo requests: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InEchoReplies", N_("echo replies: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InGroupMembQueries", N_("group member queries: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InGroupMembResponses", N_("group member responses: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InGroupMembReductions", N_("group member reductions: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InRouterSolicits", N_("router solicits: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InRouterAdvertisements", N_("router advertisement: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InNeighborSolicits", N_("neighbour solicits: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InNeighborAdvertisements", N_("neighbour advertisement: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6InRedirects", N_("redirects: %u"), i_inp_icmp | I_TITLE},
-++    {"Icmp6OutMsgs", N_("%u ICMP messages sent"), number},
-++    {"Icmp6OutDestUnreachs", N_("destination unreachable: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutPktTooBigs", N_("packets too big: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutTimeExcds", N_("sent ICMPv6 time exceeded: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutParmProblems", N_("parameter problem: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutEchos", N_("echo requests: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutEchoReplies", N_("echo replies: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutGroupMembQueries", N_("group member queries: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutGroupMembResponses", N_("group member responses: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutGroupMembReductions", N_("group member reductions: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutRouterSolicits", N_("router solicits: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutRouterAdvertisements ", N_("router advertisement: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutNeighborSolicits", N_("neighbor solicits: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutNeighborAdvertisements", N_("neighbor advertisements: %u"), i_outp_icmp | I_TITLE},
-++    {"Icmp6OutRedirects", N_("redirects: %u"), i_outp_icmp | I_TITLE},
-++};
-++
-+ struct entry Tcptab[] =
-+ {
-+     {"RtoAlgorithm", N_("RTO algorithm is %s"), i_rto_alg | I_STATIC},
-+@@ -139,6 +201,14 @@ struct entry Udptab[] =
-+     {"OutDatagrams", N_("%u packets sent"), number},
-+ };
-+ 
-++struct entry Udp6tab[] =
-++{
-++    {"Udp6InDatagrams", N_("%u packets received"), number},
-++    {"Udp6NoPorts", N_("%u packets to unknown port received."), number},
-++    {"Udp6InErrors", N_("%u packet receive errors"), number},
-++    {"Udp6OutDatagrams", N_("%u packets sent"), number},
-++};
-++
-+ struct entry Tcpexttab[] =
-+ {
-+     {"SyncookiesSent", N_("%u SYN cookies sent"), opt_number},
-+@@ -172,19 +242,59 @@ struct entry Tcpexttab[] =
-+     { "DelayedACKLost", N_("Quick ack mode was activated %u times"), opt_number },
-+     { "ListenOverflows", N_("%u times the listen queue of a socket overflowed"),
-+       opt_number },
-+-    { "ListenDrops", N_("%u SYNs to LISTEN sockets ignored"), opt_number },
-++    { "ListenDrops", N_("%u SYNs to LISTEN sockets dropped"), opt_number },
-+     { "TCPPrequeued", N_("%u packets directly queued to recvmsg prequeue."), 
-+       opt_number },
-+-    { "TCPDirectCopyFromBacklog", N_("%u packets directly received"
-+-				     " from backlog"), opt_number },
-+-    { "TCPDirectCopyFromPrequeue", N_("%u packets directly received"
-+-				      " from prequeue"), opt_number },
-++    { "TCPDirectCopyFromBacklog", N_("%u bytes directly in process context from backlog"), opt_number },
-++    { "TCPDirectCopyFromPrequeue", N_("%u bytes directly received in process context from prequeue"),
-++				      opt_number },
-+     { "TCPPrequeueDropped", N_("%u packets dropped from prequeue"), opt_number },
-+-    { "TCPHPHits", N_("%u packets header predicted"), number },
-++    { "TCPHPHits", N_("%u packet headers predicted"), number },
-+     { "TCPHPHitsToUser", N_("%u packets header predicted and "
-+ 			    "directly queued to user"), opt_number },
-+     { "SockMallocOOM", N_("Ran %u times out of system memory during " 
-+ 			  "packet sending"), opt_number }, 
-++    { "TCPPureAcks", N_("%u acknowledgments not containing data payload received"), opt_number },
-++    { "TCPHPAcks", N_("%u predicted acknowledgments"), opt_number },
-++    { "TCPRenoRecovery", N_("%u times recovered from packet loss due to fast retransmit"), opt_number },
-++    { "TCPSackRecovery", N_("%u times recovered from packet loss by selective acknowledgements"), opt_number },
-++    { "TCPSACKReneging", N_("%u bad SACK blocks received"), opt_number },
-++    { "TCPFACKReorder", N_("Detected reordering %u times using FACK"), opt_number },
-++    { "TCPSACKReorder", N_("Detected reordering %u times using SACK"), opt_number },
-++    { "TCPTSReorder", N_("Detected reordering %u times using time stamp"), opt_number },
-++    { "TCPRenoReorder", N_("Detected reordering %u times using reno fast retransmit"), opt_number },
-++    { "TCPFullUndo", N_("%u congestion windows fully recovered without slow start"), opt_number }, 
-++    { "TCPPartialUndo", N_("%u congestion windows partially recovered using Hoe heuristic"), opt_number },
-++    { "TCPDSackUndo", N_("%u congestion window recovered without slow start using DSACK"), opt_number },
-++    { "TCPLossUndo", N_("%u congestion windows recovered without slow start after partial ack"), opt_number },
-++    { "TCPLostRetransmits", N_("%u retransmits lost"), opt_number },
-++    { "TCPRenoFailures",  N_("%u timeouts after reno fast retransmit"), opt_number },
-++    { "TCPSackFailures",  N_("%u timeouts after SACK recovery"), opt_number },
-++    { "TCPLossFailures",  N_("%u timeouts in loss state"), opt_number },
-++    { "TCPFastRetrans", N_("%u fast retransmits"), opt_number },
-++    { "TCPForwardRetrans", N_("%u forward retransmits"), opt_number }, 
-++    { "TCPSlowStartRetrans", N_("%u retransmits in slow start"), opt_number },
-++    { "TCPTimeouts", N_("%u other TCP timeouts"), opt_number },
-++    { "TCPRenoRecoveryFailed", N_("%u reno fast retransmits failed"), opt_number },
-++    { "TCPSackRecoveryFail", N_("%u SACK retransmits failed"), opt_number },
-++    { "TCPSchedulerFailed", N_("%u times receiver scheduled too late for direct processing"), opt_number },
-++    { "TCPRcvCollapsed", N_("%u packets collapsed in receive queue due to low socket buffer"), opt_number },
-++    { "TCPDSACKOldSent", N_("%u DSACKs sent for old packets"), opt_number },
-++    { "TCPDSACKOfoSent", N_("%u DSACKs sent for out of order packets"), opt_number },
-++    { "TCPDSACKRecv", N_("%u DSACKs received"), opt_number },
-++    { "TCPDSACKOfoRecv", N_("%u DSACKs for out of order packets received"), opt_number },
-++    { "TCPAbortOnSyn", N_("%u connections reset due to unexpected SYN"), opt_number },
-++    { "TCPAbortOnData", N_("%u connections reset due to unexpected data"), opt_number },
-++    { "TCPAbortOnClose", N_("%u connections reset due to early user close"), opt_number },
-++    { "TCPAbortOnMemory", N_("%u connections aborted due to memory pressure"), opt_number },
-++    { "TCPAbortOnTimeout", N_("%u connections aborted due to timeout"), opt_number },
-++    { "TCPAbortOnLinger", N_("%u connections aborted after user close in linger timeout"), opt_number },
-++    { "TCPAbortFailed", N_("%u times unabled to send RST due to no memory"), opt_number }, 
-++    { "TCPMemoryPressures", N_("TCP ran low on memory %u times"), opt_number }, 
-++    { "TCPLoss", N_("%u TCP data loss events"), opt_number },
-++    { "TCPDSACKUndo", N_("%u congestion windows recovered without slow start by DSACK"), 
-++	opt_number },
-++    { "TCPRenoRecoveryFail", N_("%u classic Reno fast retransmits failed"), opt_number },
-+ };
-+ 
-+ struct tabtab {
-+@@ -204,6 +314,15 @@ struct tabtab snmptabs[] =
-+     {NULL}
-+ };
-+ 
-++struct tabtab snmp6tabs[] =
-++{
-++    {"Ip6", Ip6tab, sizeof(Ip6tab), &f_raw},
-++    {"Icmp6", Icmp6tab, sizeof(Icmp6tab), &f_raw},
-++    {"Udp6", Udp6tab, sizeof(Udp6tab), &f_udp},
-++    {"Tcp6", Tcptab, sizeof(Tcptab), &f_tcp},
-++    {NULL}
-++};
-++
-+ /* XXX IGMP */
-+ 
-+ int cmpentries(const void *a, const void *b)
-+@@ -222,7 +341,8 @@ void printval(struct tabtab *tab, char *
-+ 	    ent = bsearch(&key, tab->tab, tab->size / sizeof(struct entry),
-+ 			  sizeof(struct entry), cmpentries);
-+     if (!ent) {			/* try our best */
-+-	printf("%*s%s: %d\n", states[state].indent, "", title, val);
-++	if (val) 
-++		printf("%*s%s: %d\n", states[state].indent, "", title, val);
-+ 	return;
-+     }
-+     type = ent->type;
-+@@ -289,14 +409,17 @@ struct tabtab *newtable(struct tabtab *t
-+ 	return &dummytab;
-+ }
-+ 
-+-void process_fd(FILE *f)
-++int process_fd(FILE *f, int all, char *filter)
-+ {
-+-    char buf1[1024], buf2[1024];
-++    char buf1[2048], buf2[2048];
-+     char *sp, *np, *p;
-+     while (fgets(buf1, sizeof buf1, f)) {
-+ 	int endflag;
-+ 	struct tabtab *tab;
-+ 
-++        if (buf1[0] == '\n') // skip empty first line in 2.6 kernels
-++            continue;
-++            
-+ 	if (!fgets(buf2, sizeof buf2, f))
-+ 	    break;
-+ 	sp = strchr(buf1, ':');
-+@@ -305,6 +428,10 @@ void process_fd(FILE *f)
-+ 	    goto formaterr;
-+ 	*sp = '\0';
-+ 
-++        if (!all)
-++           if (strncmp(buf1, filter, strlen(filter)))
-++               continue;
-++
-+ 	tab = newtable(snmptabs, buf1);
-+ 	if (tab == NULL) {
-+ 		printf("unknown %s\n", buf1);
-+@@ -330,13 +457,47 @@ void process_fd(FILE *f)
-+ 	    sp = p + 1;
-+ 	}
-+     }
-+-  return;
-++  return 0;
-+   
-+ formaterr:
-+-  perror(_("error parsing /proc/net/snmp"));
-+-  return;
-++  return -1;
-++}
-++
-++void cpytitle(char *original, char *new)
-++{
-++     char *ptr = original;
-++     while(*ptr != '6' && *ptr != '\0') {
-++           *new = *ptr;
-++            new++;
-++            ptr++;
-++     }
-++    *new = *ptr;
-++    new++;
-++    *new = '\0';
-+ }
-+ 
-++void process6_fd(FILE *f)
-++{
-++   char buf1[1024],buf2[50],buf3[1024];
-++   unsigned long val;
-++   struct tabtab *tab = NULL;
-++   int cpflg = 0;
-++
-++   while (fgets(buf1, sizeof buf1, f)) {
-++          sscanf(buf1, "%s %lu", buf2, &val);
-++          if(!cpflg) {
-++             cpytitle(buf2, buf3);
-++             tab = newtable(snmp6tabs, buf3);
-++             cpflg = 1;
-++          }
-++          if(!strstr(buf2, buf3)) {
-++             cpytitle(buf2, buf3);
-++             tab = newtable(snmp6tabs, buf3);
-++          }
-++          printval(tab, buf2, val);
-++   }
-++
-++}
-+ 
-+ void parsesnmp(int flag_raw, int flag_tcp, int flag_udp)
-+ {
-+@@ -344,22 +505,25 @@ void parsesnmp(int flag_raw, int flag_tc
-+ 
-+     f_raw = flag_raw; f_tcp = flag_tcp; f_udp = flag_udp;
-+     
-+-    f = fopen("/proc/net/snmp", "r");
-++    f = proc_fopen("/proc/net/snmp");
-+     if (!f) {
-+ 	perror(_("cannot open /proc/net/snmp"));
-+ 	return;
-+     }
-+-    process_fd(f);
-++
-++    if (process_fd(f, 1, NULL) < 0)
-++      fprintf(stderr, _("Problem while parsing /proc/net/snmp\n"));
-+ 
-+     if (ferror(f))
-+ 	perror("/proc/net/snmp");
-+ 
-+     fclose(f);
-+ 
-+-    f = fopen("/proc/net/netstat", "r");
-++    f = proc_fopen("/proc/net/netstat");
-+ 
-+     if (f) {
-+-    	process_fd(f);
-++    	if (process_fd(f, 1, NULL) <0)
-++          fprintf(stderr, _("Problem while parsing /proc/net/netstat\n"));
-+ 
-+         if (ferror(f))
-+ 	    perror("/proc/net/netstat");
-+@@ -369,6 +533,33 @@ void parsesnmp(int flag_raw, int flag_tc
-+     return;
-+ }
-+     
-++void parsesnmp6(int flag_raw, int flag_tcp, int flag_udp)
-++{
-++    FILE *f;
-++
-++    f_raw = flag_raw; f_tcp = flag_tcp; f_udp = flag_udp;
-++
-++    f = fopen("/proc/net/snmp6", "r");
-++    if (!f) {
-++        perror(_("cannot open /proc/net/snmp6"));
-++        return;
-++    }
-++    process6_fd(f);
-++    if (ferror(f))
-++        perror("/proc/net/snmp6");
-++
-++    fclose(f);
-++    f = fopen("/proc/net/snmp", "r");
-++    if (!f) {
-++        perror(_("cannot open /proc/net/snmp"));
-++        return;
-++    }
-++    process_fd(f, 0, "Tcp");
-++    if (ferror(f))
-++        perror("/proc/net/snmp");
-++
-++    fclose(f);
-++}
-+ 
-+ void inittab(void)
-+ {
-+@@ -379,3 +570,13 @@ void inittab(void)
-+ 	qsort(t->tab, t->size / sizeof(struct entry),
-+ 	      sizeof(struct entry), cmpentries);
-+ }
-++
-++void inittab6(void)
-++{
-++    struct tabtab *t;
-++
-++    for (t = snmp6tabs; t->title; t++)
-++        qsort(t->tab, t->size / sizeof(struct entry),
-++              sizeof(struct entry), cmpentries);
-++}
-++
---- net-tools-1.60.orig/debian/patches/CVS-20051204-arp.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20051204-arp.c_sync.patch
-@@ -0,0 +1,311 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.25 - Sun Dec 4 02:57:15 2005 UTC by ecki
-+In order to fix alignment bugs with recent GCCs I have to use
-+sockaddr_storage instead of sockaddr for allocation.
-+http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=340384
-+Thanks to Blars Blarson, Jurij Smakov and Steve Langasek
-+
-+Revision 1.24 - Mon May 16 04:30:17 2005 UTC by ecki
-+desupport dontpub in arp.8 and arp -? (Debian Bug #203396)
-+
-+Revision 1.23 - Sat Feb 8 19:56:25 2003 UTC by ecki
-+fixed an logic error in the "not found" handling for deleting entries
-+also added a documentation comment and newer errno values for 2.4
-+Thanks to niteowl@intrinsity.com for pointing out.
-+
-+Revision 1.22 - Tue Dec 10 01:01:24 2002 UTC by ecki
-+change confusing "*" into "<from_interface>"
-+
-+Revision 1.21 - Sun May 6 02:14:07 2001 UTC by ecki
-+changed a type arp -a now prints PUB instead of PUP for proxy arp entries
-+
-+Index: net-tools/arp.c
-+===================================================================
-+--- net-tools.orig/arp.c
-++++ net-tools/arp.c
-+@@ -8,7 +8,7 @@
-+  *              NET-3 Networking Distribution for the LINUX operating
-+  *              system.
-+  *
-+- * Version:     $Id: arp.c,v 1.20 2001/04/08 17:05:05 pb Exp $
-++ * Version:     $Id: arp.c,v 1.25 2005/12/04 02:57:15 ecki Exp $
-+  *
-+  * Maintainer:  Bernd 'eckes' Eckenfels, <net-tools@lina.inka.de>
-+  *
-+@@ -100,9 +100,10 @@ static int arp_del(char **args)
-+ {
-+     char host[128];
-+     struct arpreq req;
-+-    struct sockaddr sa;
-++    struct sockaddr_storage ss;
-++    struct sockaddr *sa;
-+     int flags = 0;
-+-    int err;
-++    int deleted = 0;
-+ 
-+     memset((char *) &req, 0, sizeof(req));
-+ 
-+@@ -112,12 +113,13 @@ static int arp_del(char **args)
-+ 	return (-1);
-+     }
-+     safe_strncpy(host, *args, (sizeof host));
-+-    if (ap->input(0, host, &sa) < 0) {
-++    sa = (struct sockaddr *)&ss;
-++    if (ap->input(0, host, sa) < 0) {
-+ 	ap->herror(host);
-+ 	return (-1);
-+     }
-+     /* If a host has more than one address, use the correct one! */
-+-    memcpy((char *) &req.arp_pa, (char *) &sa, sizeof(struct sockaddr));
-++    memcpy((char *) &req.arp_pa, (char *) sa, sizeof(struct sockaddr));
-+ 
-+     if (hw_set)
-+ 	req.arp_ha.sa_family = hw->type;
-+@@ -148,7 +150,7 @@ static int arp_del(char **args)
-+ 	    continue;
-+ 	}
-+ 	if (!strcmp(*args, "dontpub")) {
-+-#ifdef HAVE_ATF_DONTPUB
-++#ifdef ATF_DONTPUB
-+ 	    req.arp_flags |= ATF_DONTPUB;
-+ #else
-+ 	    ENOSUPP("arp", "ATF_DONTPUB");
-+@@ -157,7 +159,7 @@ static int arp_del(char **args)
-+ 	    continue;
-+ 	}
-+ 	if (!strcmp(*args, "auto")) {
-+-#ifdef HAVE_ATF_MAGIC
-++#ifdef ATF_MAGIC
-+ 	    req.arp_flags |= ATF_MAGIC;
-+ #else
-+ 	    ENOSUPP("arp", "ATF_MAGIC");
-+@@ -177,11 +179,11 @@ static int arp_del(char **args)
-+ 		usage();
-+ 	    if (strcmp(*args, "255.255.255.255") != 0) {
-+ 		strcpy(host, *args);
-+-		if (ap->input(0, host, &sa) < 0) {
-++		if (ap->input(0, host, sa) < 0) {
-+ 		    ap->herror(host);
-+ 		    return (-1);
-+ 		}
-+-		memcpy((char *) &req.arp_netmask, (char *) &sa,
-++		memcpy((char *) &req.arp_netmask, (char *) sa,
-+ 		       sizeof(struct sockaddr));
-+ 		req.arp_flags |= ATF_NETMASK;
-+ 	    }
-+@@ -190,35 +192,41 @@ static int arp_del(char **args)
-+ 	}
-+ 	usage();
-+     }
-++
-++    // if neighter priv nor pub is given, work on both
-+     if (flags == 0)
-+ 	flags = 3;
-+ 
-+     strcpy(req.arp_dev, device);
-+ 
-+-    err = -1;
-++    /* unfortuatelly the kernel interface does not allow us to
-++       delete private entries anlone, so we need this hack
-++       to avoid "not found" errors if we try both. */
-++    deleted = 0;
-+ 
-+     /* Call the kernel. */
-+     if (flags & 2) {
-+ 	if (opt_v)
-+-	    fprintf(stderr, "arp: SIOCDARP(nopub)\n");
-+-	if ((err = ioctl(sockfd, SIOCDARP, &req) < 0)) {
-+-	    if (errno == ENXIO) {
-++	    fprintf(stderr, "arp: SIOCDARP(dontpub)\n");
-++	if (ioctl(sockfd, SIOCDARP, &req) < 0) {
-++	    if ((errno == ENXIO) || (errno == ENOENT)) {
-+ 		if (flags & 1)
-+-		    goto nopub;
-++		    goto dontpub;
-+ 		printf(_("No ARP entry for %s\n"), host);
-+ 		return (-1);
-+ 	    }
-+-	    perror("SIOCDARP(priv)");
-++	    perror("SIOCDARP(dontpub)");
-+ 	    return (-1);
-+-	}
-++	} else
-++	  deleted = 1;
-+     }
-+-    if ((flags & 1) && (err)) {
-+-      nopub:
-++    if (!deleted && (flags & 1)) {
-++      dontpub:
-+ 	req.arp_flags |= ATF_PUBL;
-+ 	if (opt_v)
-+ 	    fprintf(stderr, "arp: SIOCDARP(pub)\n");
-+ 	if (ioctl(sockfd, SIOCDARP, &req) < 0) {
-+-	    if (errno == ENXIO) {
-++	    if ((errno == ENXIO) || (errno == ENOENT)) {
-+ 		printf(_("No ARP entry for %s\n"), host);
-+ 		return (-1);
-+ 	    }
-+@@ -260,7 +268,8 @@ static int arp_set(char **args)
-+ {
-+     char host[128];
-+     struct arpreq req;
-+-    struct sockaddr sa;
-++    struct sockaddr_storage ss;
-++    struct sockaddr *sa;
-+     int flags;
-+ 
-+     memset((char *) &req, 0, sizeof(req));
-+@@ -271,12 +280,13 @@ static int arp_set(char **args)
-+ 	return (-1);
-+     }
-+     safe_strncpy(host, *args++, (sizeof host));
-+-    if (ap->input(0, host, &sa) < 0) {
-++    sa = (struct sockaddr *)&ss;
-++    if (ap->input(0, host, sa) < 0) {
-+ 	ap->herror(host);
-+ 	return (-1);
-+     }
-+     /* If a host has more than one address, use the correct one! */
-+-    memcpy((char *) &req.arp_pa, (char *) &sa, sizeof(struct sockaddr));
-++    memcpy((char *) &req.arp_pa, (char *) sa, sizeof(struct sockaddr));
-+ 
-+     /* Fetch the hardware address. */
-+     if (*args == NULL) {
-+@@ -317,7 +327,7 @@ static int arp_set(char **args)
-+ 	    continue;
-+ 	}
-+ 	if (!strcmp(*args, "dontpub")) {
-+-#ifdef HAVE_ATF_DONTPUB
-++#ifdef ATF_DONTPUB
-+ 	    flags |= ATF_DONTPUB;
-+ #else
-+ 	    ENOSUPP("arp", "ATF_DONTPUB");
-+@@ -326,7 +336,7 @@ static int arp_set(char **args)
-+ 	    continue;
-+ 	}
-+ 	if (!strcmp(*args, "auto")) {
-+-#ifdef HAVE_ATF_MAGIC
-++#ifdef ATF_MAGIC
-+ 	    flags |= ATF_MAGIC;
-+ #else
-+ 	    ENOSUPP("arp", "ATF_MAGIC");
-+@@ -346,11 +356,11 @@ static int arp_set(char **args)
-+ 		usage();
-+ 	    if (strcmp(*args, "255.255.255.255") != 0) {
-+ 		strcpy(host, *args);
-+-		if (ap->input(0, host, &sa) < 0) {
-++		if (ap->input(0, host, sa) < 0) {
-+ 		    ap->herror(host);
-+ 		    return (-1);
-+ 		}
-+-		memcpy((char *) &req.arp_netmask, (char *) &sa,
-++		memcpy((char *) &req.arp_netmask, (char *) sa,
-+ 		       sizeof(struct sockaddr));
-+ 		flags |= ATF_NETMASK;
-+ 	    }
-+@@ -445,11 +455,11 @@ static void arp_disp_2(char *name, int t
-+ 	strcat(flags, "M");
-+     if (arp_flags & ATF_PUBL)
-+ 	strcat(flags, "P");
-+-#ifdef HAVE_ATF_MAGIC
-++#ifdef ATF_MAGIC
-+     if (arp_flags & ATF_MAGIC)
-+ 	strcat(flags, "A");
-+ #endif
-+-#ifdef HAVE_ATF_DONTPUB
-++#ifdef ATF_DONTPUB
-+     if (arp_flags & ATF_DONTPUB)
-+ 	strcat(flags, "!");
-+ #endif
-+@@ -463,7 +473,7 @@ static void arp_disp_2(char *name, int t
-+ 
-+     if (!(arp_flags & ATF_COM)) {
-+ 	if (arp_flags & ATF_PUBL)
-+-	    printf("%-8.8s%-20.20s", "*", "*");
-++	    printf("%-8.8s%-20.20s", "*", _("<from_interface>"));
-+ 	else
-+ 	    printf("%-8.8s%-20.20s", "", _("(incomplete)"));
-+     } else {
-+@@ -486,7 +496,7 @@ static void arp_disp(char *name, char *i
-+ 
-+     if (!(arp_flags & ATF_COM)) {
-+ 	if (arp_flags & ATF_PUBL)
-+-	    printf("* ");
-++	    printf("<from_interface> ");
-+ 	else
-+ 	    printf(_("<incomplete> "));
-+     } else {
-+@@ -499,12 +509,12 @@ static void arp_disp(char *name, char *i
-+     if (arp_flags & ATF_PERM)
-+ 	printf("PERM ");
-+     if (arp_flags & ATF_PUBL)
-+-	printf("PUP ");
-+-#ifdef HAVE_ATF_MAGIC
-++	printf("PUB ");
-++#ifdef ATF_MAGIC
-+     if (arp_flags & ATF_MAGIC)
-+ 	printf("AUTO ");
-+ #endif
-+-#ifdef HAVE_ATF_DONTPUB
-++#ifdef ATF_DONTPUB
-+     if (arp_flags & ATF_DONTPUB)
-+ 	printf("DONTPUB ");
-+ #endif
-+@@ -519,7 +529,8 @@ static void arp_disp(char *name, char *i
-+ static int arp_show(char *name)
-+ {
-+     char host[100];
-+-    struct sockaddr sa;
-++    struct sockaddr_storage ss;
-++    struct sockaddr *sa;
-+     char ip[100];
-+     char hwa[100];
-+     char mask[100];
-+@@ -532,14 +543,15 @@ static int arp_show(char *name)
-+ 
-+     host[0] = '\0';
-+ 
-++    sa = (struct sockaddr *)&ss;
-+     if (name != NULL) {
-+ 	/* Resolve the host name. */
-+ 	safe_strncpy(host, name, (sizeof host));
-+-	if (ap->input(0, host, &sa) < 0) {
-++	if (ap->input(0, host, sa) < 0) {
-+ 	    ap->herror(host);
-+ 	    return (-1);
-+ 	}
-+-	safe_strncpy(host, ap->sprint(&sa, 1), sizeof(host));
-++	safe_strncpy(host, ap->sprint(sa, 1), sizeof(host));
-+     }
-+     /* Open the PROCps kernel table. */
-+     if ((fp = fopen(_PATH_PROCNET_ARP, "r")) == NULL) {
-+@@ -575,10 +587,10 @@ static int arp_show(char *name)
-+ 	    if (opt_n)
-+ 		hostname = "?";
-+ 	    else {
-+-		if (ap->input(0, ip, &sa) < 0)
-++		if (ap->input(0, ip, sa) < 0)
-+ 		    hostname = ip;
-+ 		else
-+-		    hostname = ap->sprint(&sa, opt_n | 0x8000);
-++		    hostname = ap->sprint(sa, opt_n | 0x8000);
-+ 		if (strcmp(hostname, ip) == 0)
-+ 		    hostname = "?";
-+ 	    }
-+@@ -612,11 +624,10 @@ static void version(void)
-+ static void usage(void)
-+ {
-+     fprintf(stderr, _("Usage:\n  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP cache\n"));
-+-    fprintf(stderr, _("  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP entry\n"));
-+-    fprintf(stderr, _("  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from file\n"));
-+-    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add entry\n"));
-+-    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  <-''-\n"));
-+-    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      <-''-\n\n"));
-++    fprintf(stderr, _("  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP entry\n"));
-++    fprintf(stderr, _("  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from file\n"));
-++    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add entry\n"));
-++    fprintf(stderr, _("  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          <-''-\n\n"));
-+     
-+     fprintf(stderr, _("        -a                       display (all) hosts in alternative (BSD) style\n"));
-+     fprintf(stderr, _("        -s, --set                set a new ARP entry\n"));
---- net-tools-1.60.orig/debian/patches/CVS-20081002-ifconfig.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20081002-ifconfig.c_sync.patch
-@@ -0,0 +1,379 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.58 - Thu Oct 2 23:31:04 2008 UTC by ecki
-+Avoid segfault of ifconfig(8) on missing /proc/net/dev
-+(Debian Bug #222209 Pierre Lombard, Tollef Fog Heen)
-+
-+Revision 1.57 - Tue Dec 10 00:56:41 2002 UTC by ecki
-+- change columns of netstat -i/ifconfig -s to avoid run-into (Stefan Illner)
-+- prevent segfault on protocol families without host error member
-+- use /128 as default prefix if not specified instead of /0
-+
-+Revision 1.56 - Fri Jul 5 17:36:02 2002 UTC by ecki
-+Jack Bloch noticed that the hw comamnd of ifconfig returns a
-+confusing -EBUSY if interface is up (on lkml).
-+
-+Revision 1.55 - Wed Jul 3 23:40:47 2002 UTC by ecki
-+there is no such thing as -i option for ifconfig
-+removed variable, fixed usage, added options to english man page
-+
-+Revision 1.54 - Thu Nov 1 03:00:13 2001 UTC by ecki
-+delay the setting of netmask derived from /mask after setting address
-+(Debian Bug #116573 reported by Brian Warner)
-+
-+Revision 1.53 - Thu Nov 1 01:54:49 2001 UTC by ecki
-+minor fix to return E_USAGE on -V instead of exit(0);
-+
-+Revision 1.52 - Thu Nov 1 01:48:31 2001 UTC by ecki
-+failed to set error flag if netmask setting reported an error
-+(Debian Bug #117837 reported by Sam Clegg)
-+
-+Revision 1.51 - Fri Jun 29 03:48:51 2001 UTC by ecki
-+this will check after clearing a flag, that it is indeed cleared. it will
-+also be a bit more verbose and precise on errors. See Debian Bug #102474
-+
-+Index: net-tools/ifconfig.c
-+===================================================================
-+--- net-tools.orig/ifconfig.c
-++++ net-tools/ifconfig.c
-+@@ -3,7 +3,7 @@
-+  *              that either displays or sets the characteristics of
-+  *              one or more of the system's networking interfaces.
-+  *
-+- * Version:     $Id: ifconfig.c,v 1.50 2001/04/13 18:25:18 pb Exp $
-++ * Version:     $Id: ifconfig.c,v 1.58 2008/10/02 23:31:04 ecki Exp $
-+  *
-+  * Author:      Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+  *              and others.  Copyright 1993 MicroWalt Corporation
-+@@ -88,7 +88,6 @@ struct in6_ifreq {
-+ char *Release = RELEASE, *Version = "ifconfig 1.42 (2001-04-13)";
-+ 
-+ int opt_a = 0;			/* show all interfaces          */
-+-int opt_i = 0;			/* show the statistics          */
-+ int opt_v = 0;			/* debugging output flag        */
-+ 
-+ int addr_family = 0;		/* currently selected AF        */
-+@@ -105,7 +104,7 @@ static int if_print(char *ifname)
-+     int res;
-+ 
-+     if (ife_short)
-+-	printf(_("Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-++	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-+ 
-+     if (!ifname) {
-+ 	res = for_all_interfaces(do_if_print, &opt_a);
-+@@ -113,6 +112,9 @@ static int if_print(char *ifname)
-+ 	struct interface *ife;
-+ 
-+ 	ife = lookup_interface(ifname);
-++	if (!ife) {
-++		return -1;
-++	}
-+ 	res = do_if_fetch(ife); 
-+ 	if (res >= 0) 
-+ 	    ife_print(ife);
-+@@ -127,7 +129,7 @@ static int set_flag(char *ifname, short 
-+ 
-+     safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-+     if (ioctl(skfd, SIOCGIFFLAGS, &ifr) < 0) {
-+-	fprintf(stderr, _("%s: unknown interface: %s\n"), 
-++	fprintf(stderr, _("%s: ERROR while getting interface flags: %s\n"), 
-+ 		ifname,	strerror(errno));
-+ 	return (-1);
-+     }
-+@@ -159,7 +161,7 @@ static int clr_flag(char *ifname, short 
-+ 
-+     safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-+     if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-+-	fprintf(stderr, _("%s: unknown interface: %s\n"), 
-++	fprintf(stderr, _("%s: ERROR while getting interface flags: %s\n"), 
-+ 		ifname, strerror(errno));
-+ 	return -1;
-+     }
-+@@ -172,9 +174,35 @@ static int clr_flag(char *ifname, short 
-+     return (0);
-+ }
-+ 
-++/** test is a specified flag is set */
-++static int test_flag(char *ifname, short flags)
-++{
-++    struct ifreq ifr;
-++    int fd;
-++
-++    if (strchr(ifname, ':')) {
-++        /* This is a v4 alias interface.  Downing it via a socket for
-++	   another AF may have bad consequences. */
-++        fd = get_socket_for_af(AF_INET);
-++	if (fd < 0) {
-++	    fprintf(stderr, _("No support for INET on this system.\n"));
-++	    return -1;
-++	}
-++    } else
-++        fd = skfd;
-++
-++    safe_strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-++    if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-++	fprintf(stderr, _("%s: ERROR while testing interface flags: %s\n"), 
-++		ifname, strerror(errno));
-++	return -1;
-++    }
-++    return (ifr.ifr_flags & flags);
-++}
-++
-+ static void usage(void)
-+ {
-+-    fprintf(stderr, _("Usage:\n  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"));
-++    fprintf(stderr, _("Usage:\n  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"));
-+ #if HAVE_AFINET
-+     fprintf(stderr, _("  [add <address>[/<prefixlen>]]\n"));
-+     fprintf(stderr, _("  [del <address>[/<prefixlen>]]\n"));
-+@@ -208,7 +236,7 @@ static void usage(void)
-+ static void version(void)
-+ {
-+     fprintf(stderr, "%s\n%s\n", Release, Version);
-+-    exit(0);
-++    exit(E_USAGE);
-+ }
-+ 
-+ static int set_netmask(int skfd, struct ifreq *ifr, struct sockaddr *sa)
-+@@ -222,18 +250,19 @@ static int set_netmask(int skfd, struct 
-+ 		strerror(errno));
-+ 	err = 1;
-+     }
-+-    return 0;
-++    return err;
-+ }
-+ 
-+ int main(int argc, char **argv)
-+ {
-+     struct sockaddr sa;
-++    struct sockaddr samask;
-+     struct sockaddr_in sin;
-+     char host[128];
-+     struct aftype *ap;
-+     struct hwtype *hw;
-+     struct ifreq ifr;
-+-    int goterr = 0, didnetmask = 0;
-++    int goterr = 0, didnetmask = 0, neednetmask=0;
-+     char **spp;
-+     int fd;
-+ #if HAVE_AFINET6
-+@@ -388,6 +417,8 @@ int main(int argc, char **argv)
-+ 	}
-+ 	if (!strcmp(*spp, "-promisc")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_PROMISC);
-++	    if (test_flag(ifr.ifr_name, IFF_PROMISC) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in promisc mode... maybe other application is running?\n"), ifr.ifr_name);
-+ 	    spp++;
-+ 	    continue;
-+ 	}
-+@@ -398,6 +429,8 @@ int main(int argc, char **argv)
-+ 	}
-+ 	if (!strcmp(*spp, "-multicast")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_MULTICAST);
-++	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in MULTICAST mode.\n"), ifr.ifr_name);
-+ 	    spp++;
-+ 	    continue;
-+ 	}
-+@@ -408,6 +441,8 @@ int main(int argc, char **argv)
-+ 	}
-+ 	if (!strcmp(*spp, "-allmulti")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_ALLMULTI);
-++	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in ALLMULTI mode.\n"), ifr.ifr_name);
-+ 	    spp++;
-+ 	    continue;
-+ 	}
-+@@ -430,6 +465,8 @@ int main(int argc, char **argv)
-+ 	if (!strcmp(*spp, "-dynamic")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_DYNAMIC);
-+ 	    spp++;
-++	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in DYNAMIC mode.\n"), ifr.ifr_name);
-+ 	    continue;
-+ 	}
-+ #endif
-+@@ -486,6 +523,8 @@ int main(int argc, char **argv)
-+ 
-+ 	if (!strcmp(*spp, "-broadcast")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_BROADCAST);
-++	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in BROADCAST mode.\n"), ifr.ifr_name);
-+ 	    spp++;
-+ 	    continue;
-+ 	}
-+@@ -493,7 +532,10 @@ int main(int argc, char **argv)
-+ 	    if (*++spp != NULL) {
-+ 		safe_strncpy(host, *spp, (sizeof host));
-+ 		if (ap->input(0, host, &sa) < 0) {
-+-		    ap->herror(host);
-++		    if (ap->herror)
-++		    	ap->herror(host);
-++		    else
-++		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for broadcast\n"), host);
-+ 		    goterr = 1;
-+ 		    spp++;
-+ 		    continue;
-+@@ -515,7 +557,10 @@ int main(int argc, char **argv)
-+ 		usage();
-+ 	    safe_strncpy(host, *spp, (sizeof host));
-+ 	    if (ap->input(0, host, &sa) < 0) {
-+-		ap->herror(host);
-++		    if (ap->herror)
-++		    	ap->herror(host);
-++		    else
-++		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for dstaddr\n"), host);
-+ 		goterr = 1;
-+ 		spp++;
-+ 		continue;
-+@@ -535,13 +580,16 @@ int main(int argc, char **argv)
-+ 		usage();
-+ 	    safe_strncpy(host, *spp, (sizeof host));
-+ 	    if (ap->input(0, host, &sa) < 0) {
-+-		ap->herror(host);
-++		    if (ap->herror)
-++		    	ap->herror(host);
-++		    else
-++		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for netmask\n"), host);
-+ 		goterr = 1;
-+ 		spp++;
-+ 		continue;
-+ 	    }
-+ 	    didnetmask++;
-+-	    goterr = set_netmask(ap->fd, &ifr, &sa);
-++	    goterr |= set_netmask(ap->fd, &ifr, &sa);
-+ 	    spp++;
-+ 	    continue;
-+ 	}
-+@@ -613,6 +661,8 @@ int main(int argc, char **argv)
-+ 	if (!strcmp(*spp, "-pointopoint")) {
-+ 	    goterr |= clr_flag(ifr.ifr_name, IFF_POINTOPOINT);
-+ 	    spp++;
-++	    if (test_flag(ifr.ifr_name, IFF_MULTICAST) > 0)
-++	    	fprintf(stderr, _("Warning: Interface %s still in POINTOPOINT mode.\n"), ifr.ifr_name);
-+ 	    continue;
-+ 	}
-+ 	if (!strcmp(*spp, "pointopoint")) {
-+@@ -620,7 +670,10 @@ int main(int argc, char **argv)
-+ 		spp++;
-+ 		safe_strncpy(host, *spp, (sizeof host));
-+ 		if (ap->input(0, host, &sa)) {
-+-		    ap->herror(host);
-++		    if (ap->herror)
-++		    	ap->herror(host);
-++		    else
-++		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for pointopoint\n"), host);
-+ 		    goterr = 1;
-+ 		    spp++;
-+ 		    continue;
-+@@ -661,8 +714,12 @@ int main(int argc, char **argv)
-+ 	    memcpy((char *) &ifr.ifr_hwaddr, (char *) &sa,
-+ 		   sizeof(struct sockaddr));
-+ 	    if (ioctl(skfd, SIOCSIFHWADDR, &ifr) < 0) {
-+-		fprintf(stderr, "SIOCSIFHWADDR: %s\n",
-+-			strerror(errno));
-++		if (errno == EBUSY)
-++			fprintf(stderr, "SIOCSIFHWADDR: %s - you may need to down the interface\n",
-++				strerror(errno));
-++		else
-++			fprintf(stderr, "SIOCSIFHWADDR: %s\n",
-++				strerror(errno));
-+ 		goterr = 1;
-+ 	    }
-+ 	    spp++;
-+@@ -681,12 +738,15 @@ int main(int argc, char **argv)
-+ 			usage();
-+ 		    *cp = 0;
-+ 		} else {
-+-		    prefix_len = 0;
-++		    prefix_len = 128;
-+ 		}
-+ 		safe_strncpy(host, *spp, (sizeof host));
-+ 		if (inet6_aftype.input(1, host, 
-+ 				       (struct sockaddr *) &sa6) < 0) {
-+-		    inet6_aftype.herror(host);
-++		    if (inet6_aftype.herror)
-++		    	inet6_aftype.herror(host);
-++		    else
-++		    	fprintf(stderr, _("ifconfig: Error resolving '%s' for add\n"), host);
-+ 		    goterr = 1;
-+ 		    spp++;
-+ 		    continue;
-+@@ -771,7 +831,7 @@ int main(int argc, char **argv)
-+ 			usage();
-+ 		    *cp = 0;
-+ 		} else {
-+-		    prefix_len = 0;
-++		    prefix_len = 128;
-+ 		}
-+ 		safe_strncpy(host, *spp, (sizeof host));
-+ 		if (inet6_aftype.input(1, host, 
-+@@ -800,6 +860,8 @@ int main(int argc, char **argv)
-+ 		}
-+ 		ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-+ 		ifr6.ifr6_prefixlen = prefix_len;
-++		if (opt_v)
-++			fprintf(stderr, "now deleting: ioctl(SIOCDIFADDR,{ifindex=%d,prefixlen=%ld})\n",ifr.ifr_ifindex,prefix_len);
-+ 		if (ioctl(fd, SIOCDIFADDR, &ifr6) < 0) {
-+ 		    fprintf(stderr, "SIOCDIFADDR: %s\n",
-+ 			    strerror(errno));
-+@@ -859,7 +921,7 @@ int main(int argc, char **argv)
-+ 		    usage();
-+ 		*cp = 0;
-+ 	    } else {
-+-		prefix_len = 0;
-++		prefix_len = 128;
-+ 	    }
-+ 	    safe_strncpy(host, *spp, (sizeof host));
-+ 	    if (inet6_aftype.input(1, host, (struct sockaddr *) &sa6) < 0) {
-+@@ -903,7 +965,7 @@ int main(int argc, char **argv)
-+ 	/* FIXME: sa is too small for INET6 addresses, inet6 should use that too, 
-+ 	   broadcast is unexpected */
-+ 	if (ap->getmask) {
-+-	    switch (ap->getmask(host, &sa, NULL)) {
-++	    switch (ap->getmask(host, &samask, NULL)) {
-+ 	    case -1:
-+ 		usage();
-+ 		break;
-+@@ -911,8 +973,8 @@ int main(int argc, char **argv)
-+ 		if (didnetmask)
-+ 		    usage();
-+ 
-+-		goterr = set_netmask(skfd, &ifr, &sa);
-+-		didnetmask++;
-++		// remeber to set the netmask from samask later
-++		neednetmask = 1;
-+ 		break;
-+ 	    }
-+ 	}
-+@@ -921,9 +983,11 @@ int main(int argc, char **argv)
-+ 	   exit(1);
-+ 	}
-+ 	if (ap->input(0, host, &sa) < 0) {
-+-	    ap->herror(host);
-+-	    fprintf(stderr, _("ifconfig: `--help' gives usage information.\n"));
-+-	    exit(1);
-++	    if (ap->herror)
-++	    	ap->herror(host);
-++	    else
-++	    	fprintf(stderr,_("ifconfig: error resolving '%s' to set address for af=%s\n"), host, ap->name); fprintf(stderr,
-++	    _("ifconfig: `--help' gives usage information.\n")); exit(1);
-+ 	}
-+ 	memcpy((char *) &ifr.ifr_addr, (char *) &sa, sizeof(struct sockaddr));
-+ 	{
-+@@ -980,6 +1044,14 @@ int main(int argc, char **argv)
-+ 	spp++;
-+     }
-+ 
-++    if (neednetmask) {
-++	goterr |= set_netmask(skfd, &ifr, &samask);
-++	didnetmask++;
-++    }
-++
-++    if (opt_v && goterr)
-++    	fprintf(stderr, _("WARNING: at least one error occured. (%d)\n"), goterr);
-++
-+     return (goterr);
-+ }
-+ 
---- net-tools-1.60.orig/debian/patches/CVS-20060927-mii-tool.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20060927-mii-tool.c_sync.patch
-@@ -0,0 +1,341 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.9 - Wed Sep 27 20:59:18 2006 UTC by ecki
-+
-+GigE Support by Stephen Hemminger from
-+http://developer.osdl.org/shemminger/prototypes/mii-tool.tar.bz2
-+with verbose register patch from Dean Gaudet
-+
-+Revision 1.8 - Thu Jun 3 22:18:26 2004 UTC by ecki
-+
-+added linebreak to  version signature
-+
-+Revision 1.7 - Mon Oct 20 22:22:22 2003 UTC by ecki
-+make sure version string is helpful
-+
-+Revision 1.6 - Mon Oct 20 22:01:13 2003 UTC by ecki
-+patch to recognize more hardware without MII support (from Redhat Bug#77882,
-+notified by Tilmann Bubeck).
-+
-+Revision 1.5 - Sat Jun 28 03:19:04 2003 UTC by ecki
-+Use new style MII ioctls only. This will give you a warning, if compiled
-+with old kernel source tree. It will also not work if compiled with
-+new source on old kernels. The new ioctls also require root for reading, the
-+old didnt. This fixes Debian bug #133648. No fallback compatibility
-+is included for reasons of cleaner source.
-+
-+Revision 1.4 - Wed May 28 19:41:16 2003 UTC by ecki
-+make it compile on stricter gcc3.3
-+
-+Revision 1.3 - Sun Sep 15 00:25:14 2002 UTC by ecki
-+Implemented the Sean Reifenschneider suggested fflush() to the --watch
-+function of mii-tool.
-+
-+Revision 1.2 - Fri Jun 14 01:08:20 2002 UTC by ecki
-+this fixes segfault on -A "" and -F "" in mii-tool reported in debian
-+bug #139027
-+
-+Index: net-tools/mii-tool.c
-+===================================================================
-+--- net-tools.orig/mii-tool.c
-++++ net-tools/mii-tool.c
-+@@ -29,8 +29,7 @@
-+ 	http://www.national.com/pf/DP/DP83840.html
-+ */
-+ 
-+-static char version[] =
-+-"mii-tool.c 1.9 2000/04/28 00:56:08 (David Hinds)\n";
-++static char Version[] = "$Id: mii-tool.c,v 1.9 2006/09/27 20:59:18 ecki Exp $\n(Author: David Hinds based on Donald Becker's mii-diag)";
-+ 
-+ #include <unistd.h>
-+ #include <stdlib.h>
-+@@ -46,16 +45,19 @@ static char version[] =
-+ #include <sys/socket.h>
-+ #include <sys/ioctl.h>
-+ #include <net/if.h>
-++#include <linux/sockios.h>
-++
-+ #ifndef __GLIBC__
-+ #include <linux/if_arp.h>
-+ #include <linux/if_ether.h>
-+ #endif
-+ #include "mii.h"
-++#include "version.h"
-+ 
-+ #define MAX_ETH		8		/* Maximum # of interfaces */
-+ 
-+ /* Table of known MII's */
-+-static struct {
-++static const struct {
-+     u_short	id1, id2;
-+     char	*name;
-+ } mii_id[] = {
-+@@ -74,6 +76,9 @@ static struct {
-+     { 0x0181, 0x4410, "Quality QS6612" },
-+     { 0x0282, 0x1c50, "SMSC 83C180" },
-+     { 0x0300, 0xe540, "TDK 78Q2120" },
-++    { 0x0141, 0x0c20, "Yukon 88E1011" },
-++    { 0x0141, 0x0cc0, "Yukon-EC 88E1111" },
-++    { 0x0141, 0x0c90, "Yukon-2 88E1112" },
-+ };
-+ #define NMII (sizeof(mii_id)/sizeof(mii_id[0]))
-+ 
-+@@ -137,40 +142,48 @@ static void mdio_write(int skfd, int loc
-+ 
-+ const struct {
-+     char	*name;
-+-    u_short	value;
-++    u_short	value[2];
-+ } media[] = {
-+     /* The order through 100baseT4 matches bits in the BMSR */
-+-    { "10baseT-HD",	MII_AN_10BASET_HD },
-+-    { "10baseT-FD",	MII_AN_10BASET_FD },
-+-    { "100baseTx-HD",	MII_AN_100BASETX_HD },
-+-    { "100baseTx-FD",	MII_AN_100BASETX_FD },
-+-    { "100baseT4",	MII_AN_100BASET4 },
-+-    { "100baseTx",	MII_AN_100BASETX_FD | MII_AN_100BASETX_HD },
-+-    { "10baseT",	MII_AN_10BASET_FD | MII_AN_10BASET_HD },
-++    { "10baseT-HD",	{MII_AN_10BASET_HD} },
-++    { "10baseT-FD",	{MII_AN_10BASET_FD} },
-++    { "100baseTx-HD",	{MII_AN_100BASETX_HD} },
-++    { "100baseTx-FD",	{MII_AN_100BASETX_FD} },
-++    { "100baseT4",	{MII_AN_100BASET4} },
-++    { "100baseTx",	{MII_AN_100BASETX_FD | MII_AN_100BASETX_HD} },
-++    { "10baseT",	{MII_AN_10BASET_FD | MII_AN_10BASET_HD} },
-++
-++    { "1000baseT-HD",	{0, MII_BMCR2_1000HALF} },
-++    { "1000baseT-FD",	{0, MII_BMCR2_1000FULL} },
-++    { "1000baseT",	{0, MII_BMCR2_1000HALF|MII_BMCR2_1000FULL} },
-+ };
-+ #define NMEDIA (sizeof(media)/sizeof(media[0]))
-+ 	
-+ /* Parse an argument list of media types */
-+-static int parse_media(char *arg)
-++static int parse_media(char *arg, unsigned *bmcr2)
-+ {
-+     int mask, i;
-+     char *s;
-+     mask = strtoul(arg, &s, 16);
-+     if ((*arg != '\0') && (*s == '\0')) {
-+ 	if ((mask & MII_AN_ABILITY_MASK) &&
-+-	    !(mask & ~MII_AN_ABILITY_MASK))
-+-	    return mask;
-++	    !(mask & ~MII_AN_ABILITY_MASK)) {
-++		*bmcr2 = 0;
-++		return mask;
-++	}
-+ 	goto failed;
-+-    } else {
-+-	mask = 0;
-+-	s = strtok(arg, ", ");
-+-	do {
-++    }
-++    mask = 0;
-++    *bmcr2 = 0;
-++    s = strtok(arg, ", ");
-++    do {
-+ 	    for (i = 0; i < NMEDIA; i++)
-+-		if (strcasecmp(media[i].name, s) == 0) break;
-++		if (s && strcasecmp(media[i].name, s) == 0) break;
-+ 	    if (i == NMEDIA) goto failed;
-+-	    mask |= media[i].value;
-+-	} while ((s = strtok(NULL, ", ")) != NULL);
-+-    }
-++	    mask |= media[i].value[0];
-++	    *bmcr2 |= media[i].value[1];
-++    } while ((s = strtok(NULL, ", ")) != NULL);
-++
-+     return mask;
-+ failed:
-+     fprintf(stderr, "Invalid media specification '%s'.\n", arg);
-+@@ -179,11 +192,24 @@ failed:
-+ 
-+ /*--------------------------------------------------------------------*/
-+ 
-+-static char *media_list(int mask, int best)
-++static const char *media_list(unsigned mask, unsigned mask2, int best)
-+ {
-+     static char buf[100];
-+     int i;
-+     *buf = '\0';
-++
-++    if (mask & MII_BMCR_SPEED1000) {
-++	if (mask2 & MII_BMCR2_1000HALF) {
-++	    strcat(buf, " ");
-++	    strcat(buf, "1000baseT-HD");
-++	    if (best) goto out;
-++	}
-++	if (mask2 & MII_BMCR2_1000FULL) {
-++	    strcat(buf, " ");
-++	    strcat(buf, "1000baseT-FD");
-++	    if (best) goto out;
-++	}
-++    }
-+     mask >>= 5;
-+     for (i = 4; i >= 0; i--) {
-+ 	if (mask & (1<<i)) {
-+@@ -192,6 +218,7 @@ static char *media_list(int mask, int be
-+ 	    if (best) break;
-+ 	}
-+     }
-++ out:
-+     if (mask & (1<<5))
-+ 	strcat(buf, " flow-control");
-+     return buf;
-+@@ -201,15 +228,15 @@ int show_basic_mii(int sock, int phy_id)
-+ {
-+     char buf[100];
-+     int i, mii_val[32];
-+-    int bmcr, bmsr, advert, lkpar;
-++    unsigned bmcr, bmsr, advert, lkpar, bmcr2, lpa2;
-+ 
-+     /* Some bits in the BMSR are latched, but we can't rely on being
-+        the only reader, so only the current values are meaningful */
-+     mdio_read(sock, MII_BMSR);
-+-    for (i = 0; i < ((verbose > 1) ? 32 : 8); i++)
-++    for (i = 0; i < ((verbose > 1) ? 32 : MII_BASIC_MAX); i++)
-+ 	mii_val[i] = mdio_read(sock, i);
-+ 
-+-    if (mii_val[MII_BMCR] == 0xffff) {
-++    if (mii_val[MII_BMCR] == 0xffff  || mii_val[MII_BMSR] == 0x0000) {
-+ 	fprintf(stderr, "  No MII transceiver present!.\n");
-+ 	return -1;
-+     }
-+@@ -217,6 +244,7 @@ int show_basic_mii(int sock, int phy_id)
-+     /* Descriptive rename. */
-+     bmcr = mii_val[MII_BMCR]; bmsr = mii_val[MII_BMSR];
-+     advert = mii_val[MII_ANAR]; lkpar = mii_val[MII_ANLPAR];
-++    bmcr2 = mii_val[MII_CTRL1000]; lpa2 = mii_val[MII_STAT1000];
-+ 
-+     sprintf(buf, "%s: ", ifr.ifr_name);
-+     if (bmcr & MII_BMCR_AN_ENA) {
-+@@ -224,7 +252,7 @@ int show_basic_mii(int sock, int phy_id)
-+ 	    if (advert & lkpar) {
-+ 		strcat(buf, (lkpar & MII_AN_ACK) ?
-+ 		       "negotiated" : "no autonegotiation,");
-+-		strcat(buf, media_list(advert & lkpar, 1));
-++		strcat(buf, media_list(advert & lkpar, bmcr2 & lpa2>>2, 1));
-+ 		strcat(buf, ", ");
-+ 	    } else {
-+ 		strcat(buf, "autonegotiation failed, ");
-+@@ -234,8 +262,10 @@ int show_basic_mii(int sock, int phy_id)
-+ 	}
-+     } else {
-+ 	sprintf(buf+strlen(buf), "%s Mbit, %s duplex, ",
-+-	       (bmcr & MII_BMCR_100MBIT) ? "100" : "10",
-+-	       (bmcr & MII_BMCR_DUPLEX) ? "full" : "half");
-++		((bmcr2 & (MII_BMCR2_1000HALF | MII_BMCR2_1000FULL)) & lpa2 >> 2)
-++		? "1000"
-++		: (bmcr & MII_BMCR_100MBIT) ? "100" : "10",
-++		(bmcr & MII_BMCR_DUPLEX) ? "full" : "half");
-+     }
-+     strcat(buf, (bmsr & MII_BMSR_LINK_VALID) ? "link ok" : "no link");
-+ 
-+@@ -296,12 +326,13 @@ int show_basic_mii(int sock, int phy_id)
-+ 	if (bmsr & MII_BMSR_REMOTE_FAULT)
-+ 	    printf("remote fault, ");
-+ 	printf((bmsr & MII_BMSR_LINK_VALID) ? "link ok" : "no link");
-+-	printf("\n  capabilities:%s", media_list(bmsr >> 6, 0));
-+-	printf("\n  advertising: %s", media_list(advert, 0));
-++	printf("\n  capabilities:%s", media_list(bmsr >> 6, bmcr2, 0));
-++	printf("\n  advertising: %s", media_list(advert, lpa2 >> 2, 0));
-+ 	if (lkpar & MII_AN_ABILITY_MASK)
-+-	    printf("\n  link partner:%s", media_list(lkpar, 0));
-++	    printf("\n  link partner:%s", media_list(lkpar, bmcr2, 0));
-+ 	printf("\n");
-+     }
-++    fflush(stdout);
-+     return 0;
-+ }
-+ 
-+@@ -329,7 +360,7 @@ static int do_one_xcvr(int skfd, char *i
-+ 	printf("resetting the transceiver...\n");
-+ 	mdio_write(skfd, MII_BMCR, MII_BMCR_RESET);
-+     }
-+-    if (nway_advertise) {
-++    if (nway_advertise > 0) {
-+ 	mdio_write(skfd, MII_ANAR, nway_advertise | 1);
-+ 	opt_restart = 1;
-+     }
-+@@ -379,27 +410,38 @@ static void watch_one_xcvr(int skfd, cha
-+ /*--------------------------------------------------------------------*/
-+ 
-+ const char *usage =
-+-"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...]
-+-       -V, --version               display version information
-+-       -v, --verbose               more verbose output
-+-       -R, --reset                 reset MII to poweron state
-+-       -r, --restart               restart autonegotiation
-+-       -w, --watch                 monitor for link status changes
-+-       -l, --log                   with -w, write events to syslog
-+-       -A, --advertise=media,...   advertise only specified media
-+-       -F, --force=media           force specified media technology
-+-media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
-+-       (to advertise both HD and FD) 100baseTx, 10baseT\n";
-++"usage: %s [-VvRrwl] [-A media,... | -F media] [interface ...]\n"
-++"       -V, --version               display version information\n"
-++"       -v, --verbose               more verbose output\n"
-++"       -R, --reset                 reset MII to poweron state\n"
-++"       -r, --restart               restart autonegotiation\n"
-++"       -w, --watch                 monitor for link status changes\n"
-++"       -l, --log                   with -w, write events to syslog\n"
-++"       -A, --advertise=media,...   advertise only specified media\n"
-++"       -F, --force=media           force specified media technology\n"
-++"media: 1000baseTx-HD, 1000baseTx-FD,\n"
-++"       100baseT4, 100baseTx-FD, 100baseTx-HD,\n"
-++"       10baseT-FD, 10baseT-HD,\n"
-++"       (to advertise both HD and FD) 1000baseTx, 100baseTx, 10baseT\n";
-++
-++
-++static void version(void)
-++{
-++    fprintf(stderr, "%s\n%s\n", Version, RELEASE);
-++    exit(5); /* E_VERSION */
-++}
-++
-+ 
-+ int main(int argc, char **argv)
-+ {
-+     int i, c, ret, errflag = 0;
-+     char s[6];
-++    unsigned ctrl1000 = 0;
-+     
-+     while ((c = getopt_long(argc, argv, "A:F:p:lrRvVw?", longopts, 0)) != EOF)
-+ 	switch (c) {
-+-	case 'A': nway_advertise = parse_media(optarg); break;
-+-	case 'F': fixed_speed = parse_media(optarg); break;
-++	case 'A': nway_advertise = parse_media(optarg, &ctrl1000); break;
-++	case 'F': fixed_speed = parse_media(optarg, &ctrl1000); break;
-+ 	case 'p': override_phy = atoi(optarg); break;
-+ 	case 'r': opt_restart++;	break;
-+ 	case 'R': opt_reset++;		break;
-+@@ -411,6 +453,10 @@ int main(int argc, char **argv)
-+ 	}
-+     /* Check for a few inappropriate option combinations */
-+     if (opt_watch) verbose = 0;
-++
-++    if ((nway_advertise < 0) || (fixed_speed < 0))
-++    	return 2;
-++
-+     if (errflag || (fixed_speed & (fixed_speed-1)) ||
-+ 	(fixed_speed && (opt_restart || nway_advertise))) {
-+ 	fprintf(stderr, usage, argv[0]);
-+@@ -418,7 +464,7 @@ int main(int argc, char **argv)
-+     }
-+ 
-+     if (opt_version)
-+-	printf(version);
-++	version();
-+ 
-+     /* Open a basic socket. */
-+     if ((skfd = socket(AF_INET, SOCK_DGRAM,0)) < 0) {
-+@@ -426,6 +472,9 @@ int main(int argc, char **argv)
-+ 	exit(-1);
-+     }
-+ 
-++    if (verbose > 1)
-++    	printf("Using SIOCGMIIPHY=0x%x\n", SIOCGMIIPHY);	
-++
-+     /* No remaining args means show all interfaces. */
-+     if (optind == argc) {
-+ 	ret = 1;
---- net-tools-1.60.orig/debian/patches/CVS-20070316-netstat.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20070316-netstat.c_sync.patch
-@@ -0,0 +1,484 @@
-+Sync with upstream's CVS until rev 1.53
-+
-+Revision 1.53 - Thu Mar 16 08:59:42 2006 UTC by ecki
-+
-+Debian Bug #260587 fixed, make sure the Columns state and user in netstat -t -e
-+are separated by blanks. This may cause scripts to fail parsing by column width.
-+Better wait for the script compatible output. Problems exists for ESTABLIHED
-+state only.
-+
-+Revision 1.52 - Tue Aug 2 22:28:10 2005 UTC by ecki
-+make ipx in 2.6 work (perhaps).
-+Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=318503
-+
-+Revision 1.51 - Thu Jun 3 22:27:37 2004 UTC by ecki
-+avoid namespace conflicts
-+
-+Revision 1.50 - Tue Dec 10 00:56:41 2002 UTC by ecki
-+ - change columns of netstat -i/ifconfig -s to avoid run-into (Stefan Illner)
-+ - prevent segfault on protocol families without host error member
-+ - use /128 as default prefix if not specified instead of /0
-+
-+Revision 1.49 - Tue Jul 23 21:08:16 2002 UTC by ecki
-+allow support for -6 and -4 options to netstat, also allow both, and
-+print out tcp6, udp6 or raw6 if it is a v6 socket
-+
-+Revision 1.48 - Thu Jun 27 18:04:02 2002 UTC by ecki
-+fixing debian bug #151130 reported by Dan Jacobson where netstat
-+was printing 81 chars in a line for tcp, udp and raw.
-+
-+Revision 1.47 - Tue Feb 19 01:12:49 2002 UTC by ecki
-+inodes in unix domain sockets are now padded to 8chars (netstat -x)
-+
-+Revision 1.46 - Tue Feb 19 00:55:35 2002 UTC by ecki
-+fixes debian bug#134600 (sigsegv in netstat on negative inoded in
-+/proc/net/udp) on "netstat -lpu". Thanks to Arnaud Giersch for the report.
-+
-+Revision 1.45 - Sun Nov 25 06:48:50 2001 UTC by ecki
-+this fixes Debian Bug #109164 (netstat -ci does only print stats once). It
-+also renames add_interface and free_interface list to if_cache_add/free.
-+I am not sure if removing the "proc_read" flag will harm performance, looks
-+likt this check is never triggereed. Anyway, we need more efficient b-search
-+sooner or later.
-+
-+Revision 1.44 - Sun Aug 26 05:25:21 2001 UTC by ak
-+Fix netstat -- don't print all v4 addresses as v4-mapped-in-v6.
-+
-+Index: net-tools/netstat.c
-+===================================================================
-+--- net-tools.orig/netstat.c
-++++ net-tools/netstat.c
-+@@ -6,7 +6,7 @@
-+  *              NET-3 Networking Distribution for the LINUX operating
-+  *              system.
-+  *
-+- * Version:     $Id: netstat.c,v 1.43 2001/04/15 14:41:17 pb Exp $
-++ * Version:     $Id: netstat.c,v 1.54 2007/12/01 18:12:34 ecki Exp $
-+  *
-+  * Authors:     Fred Baumgarten, <dc6iq@insu1.etec.uni-karlsruhe.de>
-+  *              Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+@@ -216,7 +216,7 @@ FILE *procinfo;
-+ 
-+ static struct prg_node {
-+     struct prg_node *next;
-+-    int inode;
-++    unsigned long inode;
-+     char name[PROGNAME_WIDTH];
-+ } *prg_hash[PRG_HASH_SIZE];
-+ 
-+@@ -249,7 +249,7 @@ static char prg_cache_loaded = 0;
-+ /* NOT working as of glibc-2.0.7: */
-+ #undef  DIRENT_HAVE_D_TYPE_WORKS
-+ 
-+-static void prg_cache_add(int inode, char *name)
-++static void prg_cache_add(unsigned long inode, char *name)
-+ {
-+     unsigned hi = PRG_HASHIT(inode);
-+     struct prg_node **pnp,*pn;
-+@@ -272,7 +272,7 @@ static void prg_cache_add(int inode, cha
-+     strcpy(pn->name,name);
-+ }
-+ 
-+-static const char *prg_cache_get(int inode)
-++static const char *prg_cache_get(unsigned long inode)
-+ {
-+     unsigned hi=PRG_HASHIT(inode);
-+     struct prg_node *pn;
-+@@ -295,16 +295,18 @@ static void prg_cache_clear(void)
-+     prg_cache_loaded=0;
-+ }
-+ 
-+-static void extract_type_1_socket_inode(const char lname[], long * inode_p) {
-++static int extract_type_1_socket_inode(const char lname[], unsigned long * inode_p) {
-+ 
-+     /* If lname is of the form "socket:[12345]", extract the "12345"
-+        as *inode_p.  Otherwise, return -1 as *inode_p.
-+        */
-+ 
-+-    if (strlen(lname) < PRG_SOCKET_PFXl+3) *inode_p = -1;
-+-    else if (memcmp(lname, PRG_SOCKET_PFX, PRG_SOCKET_PFXl)) *inode_p = -1;
-+-    else if (lname[strlen(lname)-1] != ']') *inode_p = -1;
-+-    else {
-++    if (strlen(lname) < PRG_SOCKET_PFXl+3) return(-1);
-++    
-++    if (memcmp(lname, PRG_SOCKET_PFX, PRG_SOCKET_PFXl)) return(-1);
-++    if (lname[strlen(lname)-1] != ']') return(-1);
-++
-++    {
-+         char inode_str[strlen(lname + 1)];  /* e.g. "12345" */
-+         const int inode_str_len = strlen(lname) - PRG_SOCKET_PFXl - 1;
-+         char *serr;
-+@@ -313,37 +315,41 @@ static void extract_type_1_socket_inode(
-+         inode_str[inode_str_len] = '\0';
-+         *inode_p = strtol(inode_str,&serr,0);
-+         if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
-+-            *inode_p = -1;
-++            return(-1);
-+     }
-++    return(0);
-+ }
-+ 
-+ 
-+ 
-+-static void extract_type_2_socket_inode(const char lname[], long * inode_p) {
-++static int extract_type_2_socket_inode(const char lname[], unsigned long * inode_p) {
-+ 
-+     /* If lname is of the form "[0000]:12345", extract the "12345"
-+        as *inode_p.  Otherwise, return -1 as *inode_p.
-+        */
-+ 
-+-    if (strlen(lname) < PRG_SOCKET_PFX2l+1) *inode_p = -1;
-+-    else if (memcmp(lname, PRG_SOCKET_PFX2, PRG_SOCKET_PFX2l)) *inode_p = -1;
-+-    else {
-++    if (strlen(lname) < PRG_SOCKET_PFX2l+1) return(-1);
-++    if (memcmp(lname, PRG_SOCKET_PFX2, PRG_SOCKET_PFX2l)) return(-1);
-++
-++    {
-+         char *serr;
-+ 
-+         *inode_p=strtol(lname + PRG_SOCKET_PFX2l,&serr,0);
-+         if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
-+-            *inode_p = -1;
-++            return(-1);
-+     }
-++    return(0);
-+ }
-+ 
-+ 
-+ 
-++
-+ static void prg_cache_load(void)
-+ {
-+     char line[LINE_MAX],eacces=0;
-+     int procfdlen,fd,cmdllen,lnamelen;
-+     char lname[30],cmdlbuf[512],finbuf[PROGNAME_WIDTH];
-+-    long inode;
-++    unsigned long inode;
-+     const char *cs,*cmdlp;
-+     DIR *dirproc=NULL,*dirfd=NULL;
-+     struct dirent *direproc,*direfd;
-+@@ -386,11 +392,9 @@ static void prg_cache_load(void)
-+ 	    lnamelen=readlink(line,lname,sizeof(lname)-1);
-+             lname[lnamelen] = '\0';  /*make it a null-terminated string*/
-+ 
-+-            extract_type_1_socket_inode(lname, &inode);
-+-
-+-            if (inode < 0) extract_type_2_socket_inode(lname, &inode);
-+-
-+-            if (inode < 0) continue;
-++            if (extract_type_1_socket_inode(lname, &inode) < 0)
-++              if (extract_type_2_socket_inode(lname, &inode) < 0)
-++                continue;
-+ 
-+ 	    if (!cmdlp) {
-+ 		if (procfdlen - PATH_FD_SUFFl + PATH_CMDLINEl >= 
-+@@ -527,10 +531,10 @@ static void finish_this_one(int uid, uns
-+ 
-+     if (flag_exp > 1) {
-+ 	if (!(flag_not & FLAG_NUM_USER) && ((pw = getpwuid(uid)) != NULL))
-+-	    printf("%-10s ", pw->pw_name);
-++	    printf(" %-10s ", pw->pw_name);
-+ 	else
-+-	    printf("%-10d ", uid);
-+-	printf("%-10ld ",inode);
-++	    printf(" %-10d ", uid);
-++	printf("%-10lu ",inode);
-+     }
-+     if (flag_prg)
-+ 	printf("%-" PROGNAME_WIDTHs "s",prg_cache_get(inode));
-+@@ -705,6 +709,7 @@ static void tcp_do_one(int lnr, const ch
-+     unsigned long rxq, txq, time_len, retr, inode;
-+     int num, local_port, rem_port, d, state, uid, timer_run, timeout;
-+     char rem_addr[128], local_addr[128], timers[64], buffer[1024], more[512];
-++    char *protname;
-+     struct aftype *ap;
-+ #if HAVE_AFINET6
-+     struct sockaddr_in6 localaddr, remaddr;
-+@@ -719,12 +724,13 @@ static void tcp_do_one(int lnr, const ch
-+ 	return;
-+ 
-+     num = sscanf(line,
-+-    "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-++    "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
-+ 		 &d, local_addr, &local_port, rem_addr, &rem_port, &state,
-+ 		 &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
-+ 
-+     if (strlen(local_addr) > 8) {
-+ #if HAVE_AFINET6
-++	protname = "tcp6";
-+ 	/* Demangle what the kernel gives us */
-+ 	sscanf(local_addr, "%08X%08X%08X%08X",
-+ 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
-+@@ -740,6 +746,7 @@ static void tcp_do_one(int lnr, const ch
-+ 	remaddr.sin6_family = AF_INET6;
-+ #endif
-+     } else {
-++	protname = "tcp";
-+ 	sscanf(local_addr, "%X",
-+ 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
-+ 	sscanf(rem_addr, "%X",
-+@@ -813,8 +820,8 @@ static void tcp_do_one(int lnr, const ch
-+ 			 timer_run, (double) time_len / HZ, retr, timeout);
-+ 		break;
-+ 	    }
-+-	printf("tcp   %6ld %6ld %-23s %-23s %-12s",
-+-	       rxq, txq, local_addr, rem_addr, _(tcp_state[state]));
-++	printf("%-4s  %6ld %6ld %-*s %-*s %-11s",
-++	       protname, rxq, txq, netmax(23,strlen(local_addr)), local_addr, netmax(23,strlen(rem_addr)), rem_addr, _(tcp_state[state]));
-+ 
-+ 	finish_this_one(uid,inode,timers);
-+     }
-+@@ -831,6 +838,7 @@ static void udp_do_one(int lnr, const ch
-+     char buffer[8192], local_addr[64], rem_addr[64];
-+     char *udp_state, timers[64], more[512];
-+     int num, local_port, rem_port, d, state, timer_run, uid, timeout;
-++    char *protname;
-+ #if HAVE_AFINET6
-+     struct sockaddr_in6 localaddr, remaddr;
-+     char addr6[INET6_ADDRSTRLEN];
-+@@ -847,13 +855,14 @@ static void udp_do_one(int lnr, const ch
-+ 
-+     more[0] = '\0';
-+     num = sscanf(line,
-+-		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-++		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
-+ 		 &d, local_addr, &local_port,
-+ 		 rem_addr, &rem_port, &state,
-+ 	  &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
-+ 
-+     if (strlen(local_addr) > 8) {
-+ #if HAVE_AFINET6
-++	protname="udp6";
-+ 	sscanf(local_addr, "%08X%08X%08X%08X",
-+ 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
-+ 	       &in6.s6_addr32[2], &in6.s6_addr32[3]);
-+@@ -868,6 +877,7 @@ static void udp_do_one(int lnr, const ch
-+ 	remaddr.sin6_family = AF_INET6;
-+ #endif
-+     } else {
-++        protname="udp";
-+ 	sscanf(local_addr, "%X",
-+ 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
-+ 	sscanf(rem_addr, "%X",
-+@@ -953,8 +963,8 @@ static void udp_do_one(int lnr, const ch
-+ 			 retr, timeout);
-+ 		break;
-+ 	    }
-+-	printf("udp   %6ld %6ld %-23s %-23s %-12s",
-+-	       rxq, txq, local_addr, rem_addr, udp_state);
-++	printf("%-4s  %6ld %6ld %-23s %-23s %-11s",
-++	       protname, rxq, txq, local_addr, rem_addr, udp_state);
-+ 
-+ 	finish_this_one(uid,inode,timers);
-+     }
-+@@ -971,6 +981,7 @@ static void raw_do_one(int lnr, const ch
-+     char buffer[8192], local_addr[64], rem_addr[64];
-+     char timers[64], more[512];
-+     int num, local_port, rem_port, d, state, timer_run, uid, timeout;
-++    char *protname;
-+ #if HAVE_AFINET6
-+     struct sockaddr_in6 localaddr, remaddr;
-+     char addr6[INET6_ADDRSTRLEN];
-+@@ -987,12 +998,13 @@ static void raw_do_one(int lnr, const ch
-+ 
-+     more[0] = '\0';
-+     num = sscanf(line,
-+-		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %ld %512s\n",
-++		 "%d: %64[0-9A-Fa-f]:%X %64[0-9A-Fa-f]:%X %X %lX:%lX %X:%lX %lX %d %d %lu %512s\n",
-+ 		 &d, local_addr, &local_port, rem_addr, &rem_port, &state,
-+ 	  &txq, &rxq, &timer_run, &time_len, &retr, &uid, &timeout, &inode, more);
-+ 
-+     if (strlen(local_addr) > 8) {
-+ #if HAVE_AFINET6
-++	protname = "raw6";
-+ 	sscanf(local_addr, "%08X%08X%08X%08X",
-+ 	       &in6.s6_addr32[0], &in6.s6_addr32[1],
-+            &in6.s6_addr32[2], &in6.s6_addr32[3]);
-+@@ -1007,6 +1019,7 @@ static void raw_do_one(int lnr, const ch
-+ 	remaddr.sin6_family = AF_INET6;
-+ #endif
-+     } else {
-++        protname = "raw";
-+ 	sscanf(local_addr, "%X",
-+ 	       &((struct sockaddr_in *) &localaddr)->sin_addr.s_addr);
-+ 	sscanf(rem_addr, "%X",
-+@@ -1074,8 +1087,8 @@ static void raw_do_one(int lnr, const ch
-+ 			 retr, timeout);
-+ 		break;
-+ 	    }
-+-	printf("raw   %6ld %6ld %-23s %-23s %-12d",
-+-	       rxq, txq, local_addr, rem_addr, state);
-++	printf("%-4s  %6ld %6ld %-23s %-23s %-11d",
-++	       protname, rxq, txq, local_addr, rem_addr, state);
-+ 
-+ 	finish_this_one(uid,inode,timers);
-+     }
-+@@ -1099,9 +1112,9 @@ static void unix_do_one(int nr, const ch
-+     static int has = 0;
-+     char path[MAXPATHLEN], ss_flags[32];
-+     char *ss_proto, *ss_state, *ss_type;
-+-    int num, state, type, inode;
-++    int num, state, type;
-+     void *d;
-+-    unsigned long refcnt, proto, flags;
-++    unsigned long refcnt, proto, flags, inode;
-+ 
-+     if (nr == 0) {
-+ 	if (strstr(line, "Inode"))
-+@@ -1109,14 +1122,14 @@ static void unix_do_one(int nr, const ch
-+ 	return;
-+     }
-+     path[0] = '\0';
-+-    num = sscanf(line, "%p: %lX %lX %lX %X %X %d %s",
-++    num = sscanf(line, "%p: %lX %lX %lX %X %X %lu %s",
-+ 		 &d, &refcnt, &proto, &flags, &type, &state, &inode, path);
-+     if (num < 6) {
-+ 	fprintf(stderr, _("warning, got bogus unix line.\n"));
-+ 	return;
-+     }
-+     if (!(has & HAS_INODE))
-+-	snprintf(path,sizeof(path),"%d",inode);
-++	snprintf(path,sizeof(path),"%lu",inode);
-+ 
-+     if (!flag_all) {
-+     	if ((state == SS_UNCONNECTED) && (flags & SO_ACCEPTCON)) {
-+@@ -1208,9 +1221,9 @@ static void unix_do_one(int nr, const ch
-+     printf("%-5s %-6ld %-11s %-10s %-13s ",
-+ 	   ss_proto, refcnt, ss_flags, ss_type, ss_state);
-+     if (has & HAS_INODE)
-+-	printf("%-6d ",inode);
-++	printf("%-8lu ",inode);
-+     else
-+-	printf("-      ");
-++	printf("-        ");
-+     if (flag_prg)
-+ 	printf("%-" PROGNAME_WIDTHs "s",(has & HAS_INODE?prg_cache_get(inode):"-"));
-+     puts(path);
-+@@ -1350,18 +1363,37 @@ static int ipx_info(void)
-+     char sad[50], dad[50];
-+     struct sockaddr sa;
-+     unsigned sport = 0, dport = 0;
-+-
-+-    if (!(f = fopen(_PATH_PROCNET_IPX, "r"))) {
-+-	if (errno != ENOENT) {
-+-	    perror(_PATH_PROCNET_IPX);
-+-	    return (-1);
-+-	}
-+-	if (flag_arg || flag_ver)
-+-	    ESYSNOT("netstat", "AF IPX");
-+-	if (flag_arg)
-+-	    return (1);
-+-	else
-+-	    return (0);
-++    struct stat s;
-++    
-++    f = fopen(_PATH_PROCNET_IPX_SOCKET1, "r");
-++    if (!f) {
-++        if (errno != ENOENT) {
-++            perror(_PATH_PROCNET_IPX_SOCKET1);
-++            return (-1);
-++        }
-++        f = fopen(_PATH_PROCNET_IPX_SOCKET2, "r");
-++
-++        /* We need to check for directory */
-++        if (f) {
-++            fstat(fileno(f), &s);
-++            if (!S_ISREG(s.st_mode)) {
-++                fclose(f);
-++                f=NULL;
-++            }
-++        }
-++
-++        if (!f) {
-++            if (errno != ENOENT) {
-++	        perror(_PATH_PROCNET_IPX_SOCKET2);
-++	        return (-1);
-++	    }
-++	    if (flag_arg || flag_ver)
-++	        ESYSNOT("netstat", "AF IPX");
-++	    if (flag_arg)
-++	        return (1);
-++ 	    else
-++	        return (0);
-++        }
-+     }
-+     printf(_("Active IPX sockets\nProto Recv-Q Send-Q Local Address              Foreign Address            State"));	/* xxx */
-+     if (flag_exp > 1)
-+@@ -1381,7 +1413,7 @@ static int ipx_info(void)
-+ 	    sscanf(st, "%X", &sport);	/* net byt order */
-+ 	    sport = ntohs(sport);
-+ 	} else {
-+-	    EINTERN("netstat.c", _PATH_PROCNET_IPX " sport format error");
-++	    EINTERN("netstat.c", "ipx socket format error in source port");
-+ 	    return (-1);
-+ 	}
-+ 	nc = 0;
-+@@ -1391,7 +1423,7 @@ static int ipx_info(void)
-+ 		sscanf(st, "%X", &dport);	/* net byt order */
-+ 		dport = ntohs(dport);
-+ 	    } else {
-+-		EINTERN("netstat.c", _PATH_PROCNET_IPX " dport format error");
-++		EINTERN("netstat.c", "ipx soket format error in destination port");
-+ 		return (-1);
-+ 	    }
-+ 	} else
-+@@ -1449,7 +1481,7 @@ static int iface_info(void)
-+     }
-+     if (flag_exp < 2) {
-+ 	ife_short = 1;
-+-	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-++	printf(_("Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg\n"));
-+     }
-+ 
-+     if (for_all_interfaces(do_if_print, &flag_all) < 0) {
-+@@ -1457,7 +1489,7 @@ static int iface_info(void)
-+ 	exit(1);
-+     }
-+     if (flag_cnt)
-+-	free_interface_list();
-++	if_cache_free();
-+     else {
-+ 	close(skfd);
-+ 	skfd = -1;
-+@@ -1503,7 +1535,7 @@ static void usage(void)
-+     fprintf(stderr, _("        -C, --cache              display routing cache instead of FIB\n\n"));
-+ 
-+     fprintf(stderr, _("  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --netrom\n"));
-+-    fprintf(stderr, _("  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"), DFLT_AF);
-++    fprintf(stderr, _("  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"), DFLT_AF);
-+     fprintf(stderr, _("  List of possible address families (which support routing):\n"));
-+     print_aflist(1); /* 1 = routeable */
-+     exit(E_USAGE);
-+@@ -1514,7 +1546,7 @@ int main
-+  (int argc, char *argv[]) {
-+     int i;
-+     int lop;
-+-    struct option longopts[] =
-++    static struct option longopts[] =
-+     {
-+ 	AFTRANS_OPTS,
-+ 	{"version", 0, 0, 'V'},
-+@@ -1556,7 +1588,7 @@ int main
-+     getroute_init();		/* Set up AF routing support */
-+ 
-+     afname[0] = '\0';
-+-    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuVv?wxl", longopts, &lop)) != EOF)
-++    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuVv?wxl64", longopts, &lop)) != EOF)
-+ 	switch (i) {
-+ 	case -1:
-+ 	    break;
-+@@ -1624,6 +1656,14 @@ int main
-+ 	case 'o':
-+ 	    flag_opt++;
-+ 	    break;
-++	case '6':
-++	    if (aftrans_opt("inet6"))
-++		exit(1);
-++	    break;
-++	case '4':
-++	    if (aftrans_opt("inet"))
-++		exit(1);
-++	    break;
-+ 	case 'V':
-+ 	    version();
-+ 	    /*NOTREACHED */
---- net-tools-1.60.orig/debian/patches/netstat.c-local_changes.patch
-+++ net-tools-1.60/debian/patches/netstat.c-local_changes.patch
-@@ -0,0 +1,61 @@
-+Undocumented patches found in diff.gz.
-+
-+Index: net-tools/netstat.c
-+===================================================================
-+--- net-tools.orig/netstat.c
-++++ net-tools/netstat.c
-+@@ -387,6 +387,10 @@ static void prg_cache_load(void)
-+ #ifdef DIRENT_HAVE_D_TYPE_WORKS
-+ 	    if (direfd->d_type!=DT_LNK) 
-+ 		continue;
-++#else
-++	    /* Skip . and .. */
-++	    if (!isdigit(direfd->d_name[0]))
-++		continue;
-+ #endif
-+ 	    if (procfdlen+1+strlen(direfd->d_name)+1>sizeof(line)) 
-+ 		continue;
-+@@ -541,9 +545,9 @@ static void finish_this_one(int uid, uns
-+ 	printf("%-10lu ",inode);
-+     }
-+     if (flag_prg)
-+-	printf("%-" PROGNAME_WIDTHs "s",prg_cache_get(inode));
-++	printf(" %-16s",prg_cache_get(inode));
-+     if (flag_opt)
-+-	printf("%s", timers);
-++	printf(" %s", timers);
-+     putchar('\n');
-+ }
-+ 
-+@@ -1250,7 +1254,7 @@ static int unix_info(void)
-+ 	printf(_("(w/o servers)"));
-+     }
-+ 
-+-    printf(_("\nProto RefCnt Flags       Type       State         I-Node"));
-++    printf(_("\nProto RefCnt Flags       Type       State         I-Node  "));
-+     print_progname_banner();
-+     printf(_(" Path\n"));	/* xxx */
-+ 
-+@@ -1813,10 +1817,11 @@ int main
-+ 	    }
-+ 	    printf(_("\nProto Recv-Q Send-Q Local Address           Foreign Address         State      "));	/* xxx */
-+ 	    if (flag_exp > 1)
-+-		printf(_(" User       Inode     "));
-+-	    print_progname_banner();
-++		printf(_(" User       Inode      "));
-++            if (flag_prg)
-++                printf(_(" PID/Program name"));
-+ 	    if (flag_opt)
-+-		printf(_(" Timer"));	/* xxx */
-++		printf(_(" Timer"));
-+ 	    printf("\n");
-+ #else
-+ 	    if (flag_arg) {
-+@@ -1917,6 +1922,7 @@ int main
-+ 	    }
-+ #endif
-+ 	}
-++	            
-+ 	if (!flag_cnt || i)
-+ 	    break;
-+ 	sleep(1);
---- net-tools-1.60.orig/debian/patches/CVS-20061011-ipmaddr.c_buffer_overflow.patch
-+++ net-tools-1.60/debian/patches/CVS-20061011-ipmaddr.c_buffer_overflow.patch
-@@ -0,0 +1,36 @@
-+Patch by Jochen Voss, already applied in upstream CVS. (Bug #392263)
-+Index: net-tools/ipmaddr.c
-+===================================================================
-+--- net-tools.orig/ipmaddr.c
-++++ net-tools/ipmaddr.c
-+@@ -291,13 +291,15 @@ static void print_mlist(FILE *fp, struct
-+ static int multiaddr_list(int argc, char **argv)
-+ {
-+ 	struct ma_info *list = NULL;
-++	size_t l;
-+ 
-+ 	while (argc > 0) {
-+ 		if (strcmp(*argv, "dev") == 0) {
-+ 			NEXT_ARG();
-+-			if (filter_dev[0])
-++			l = strlen(*argv);
-++			if (l <= 0 || l >= sizeof(filter_dev))
-+ 				usage();
-+-			strcpy(filter_dev, *argv);
-++			strncpy(filter_dev, *argv, sizeof (filter_dev));
-+ 		} else if (strcmp(*argv, "all") == 0) {
-+ 			filter_family = AF_UNSPEC;
-+ 		} else if (strcmp(*argv, "ipv4") == 0) {
-+@@ -307,9 +309,10 @@ static int multiaddr_list(int argc, char
-+ 		} else if (strcmp(*argv, "link") == 0) {
-+ 			filter_family = AF_PACKET;
-+ 		} else {
-+-			if (filter_dev[0])
-++			l = strlen(*argv);
-++			if (l <= 0 || l >= sizeof(filter_dev))
-+ 				usage();
-+-			strcpy(filter_dev, *argv);
-++			strncpy(filter_dev, *argv, sizeof (filter_dev));
-+ 		}
-+ 		argv++; argc--;
-+ 	}
---- net-tools-1.60.orig/debian/patches/series
-+++ net-tools-1.60/debian/patches/series
-@@ -0,0 +1,22 @@
-+CVS-20020730-route.c_opts_64.patch
-+CVS-20030911-nameif.c_sync.patch
-+CVS-20031011-hostname.c_sync.patch
-+CVS-20051204-arp.c_sync.patch
-+CVS-20051204-slttach.c_sync.patch
-+CVS-20060927-mii-tool.c_sync.patch
-+CVS-20061011-includes_sync.patch
-+CVS-20061011-ipmaddr.c_buffer_overflow.patch
-+CVS-20070316-netstat.c_sync.patch
-+CVS-20071202-rarp.c_sync.patch
-+CVS-20081002-ifconfig.c_sync.patch
-+CVS-20081003-statistics.c_sync.patch
-+CVS-lib_sync.patch
-+CVS-20081003-config.in_sync.patch
-+CVS-20081002-manpages_sync.patch
-+netstat.c-assorted_changes.patch
-+Bug#254243-netstat.c-wide-opt.patch
-+netstat.c-local_changes.patch
-+translations.patch
-+lib_local_changes.patch
-+local-manpages.patch
-+Bug#345331-socket_overflow.patch
---- net-tools-1.60.orig/debian/patches/Bug#345331-socket_overflow.patch
-+++ net-tools-1.60/debian/patches/Bug#345331-socket_overflow.patch
-@@ -0,0 +1,28 @@
-+Patch by Antonio Galea <ant9000@netwise.it> to solve the socket number overflow
-+from #345331
-+
-+diff -urNad net-tools-1.60/netstat.c /tmp/dpep.15Gej9/net-tools-1.60/netstat.c
-+--- net-tools-1.60/netstat.c	2005-12-30 16:52:15.000000000 +0100
-++++ /tmp/dpep.15Gej9/net-tools-1.60/netstat.c	2005-12-30 16:56:00.000000000 +0100
-+@@ -313,8 +313,8 @@
-+ 
-+         strncpy(inode_str, lname+PRG_SOCKET_PFXl, inode_str_len);
-+         inode_str[inode_str_len] = '\0';
-+-        *inode_p = strtol(inode_str,&serr,0);
-+-        if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
-++        *inode_p = strtoul(inode_str,&serr,0);
-++        if (!serr || *serr)
-+             return(-1);
-+     }
-+     return(0);
-+@@ -334,8 +334,8 @@
-+     {
-+         char *serr;
-+ 
-+-        *inode_p=strtol(lname + PRG_SOCKET_PFX2l,&serr,0);
-+-        if (!serr || *serr || *inode_p < 0 || *inode_p >= INT_MAX) 
-++        *inode_p=strtoul(lname + PRG_SOCKET_PFX2l,&serr,0);
-++        if (!serr || *serr)
-+             return(-1);
-+     }
-+     return(0);
---- net-tools-1.60.orig/debian/patches/lib_local_changes.patch
-+++ net-tools-1.60/debian/patches/lib_local_changes.patch
-@@ -0,0 +1,410 @@
-+Changes extracted from diff.gz, not present in upstream's CVS.
-+
-+Index: net-tools/lib/ec_hw.c
-+===================================================================
-+--- net-tools.orig/lib/ec_hw.c
-++++ net-tools/lib/ec_hw.c
-+@@ -16,6 +16,8 @@
-+ 
-+ #if HAVE_HWEC
-+ 
-++#include <stddef.h>
-++
-+ #include <net/if_arp.h>
-+ #include "net-support.h"
-+ 
-+Index: net-tools/lib/fddi.c
-+===================================================================
-+--- net-tools.orig/lib/fddi.c
-++++ net-tools/lib/fddi.c
-+@@ -26,6 +26,7 @@
-+ #error "No FDDI Support in your current Kernelsource Tree."
-+ #error "Disable HW Type FDDI"
-+ #endif
-++#include <linux/types.h>
-+ #if __GLIBC__ >= 2
-+ #include <netinet/if_fddi.h>
-+ #else
-+Index: net-tools/lib/interface.c
-+===================================================================
-+--- net-tools.orig/lib/interface.c
-++++ net-tools/lib/interface.c
-+@@ -594,7 +594,7 @@ int do_if_print(struct interface *ife, v
-+ 
-+ void ife_print_short(struct interface *ptr)
-+ {
-+-    printf("%-5.5s ", ptr->name);
-++    printf("%-9s ", ptr->name);
-+     printf("%5d %-2d ", ptr->mtu, ptr->metric);
-+     /* If needed, display the interface statistics. */
-+     if (ptr->statistics_valid) {
-+@@ -653,8 +653,7 @@ void ife_print_long(struct interface *pt
-+     unsigned long long rx, tx, short_rx, short_tx;
-+     const char *Rext = "B";
-+     const char *Text = "B";
-+-    static char flags[200];
-+-    
-++
-+ #if HAVE_AFIPX
-+     static struct aftype *ipxtype = NULL;
-+ #endif
-+@@ -686,70 +685,32 @@ void ife_print_long(struct interface *pt
-+     if (hw == NULL)
-+ 	hw = get_hwntype(-1);
-+ 
-+-    sprintf(flags, "flags=%d<", ptr->flags);
-+-    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short, too */
-+-    if (ptr->flags == 0)
-+-	strcat(flags,">");
-+-    if (ptr->flags & IFF_UP)
-+-	strcat(flags,_("UP,"));
-+-    if (ptr->flags & IFF_BROADCAST)
-+-	strcat(flags,_("BROADCAST,"));
-+-    if (ptr->flags & IFF_DEBUG)
-+-	strcat(flags,_("DEBUG,"));
-+-    if (ptr->flags & IFF_LOOPBACK)
-+-	strcat(flags,_("LOOPBACK,"));
-+-    if (ptr->flags & IFF_POINTOPOINT)
-+-	strcat(flags,_("POINTOPOINT,"));
-+-    if (ptr->flags & IFF_NOTRAILERS)
-+-	strcat(flags,_("NOTRAILERS,"));
-+-    if (ptr->flags & IFF_RUNNING)
-+-	strcat(flags,_("RUNNING,"));
-+-    if (ptr->flags & IFF_NOARP)
-+-	strcat(flags,_("NOARP,"));
-+-    if (ptr->flags & IFF_PROMISC)
-+-	strcat(flags,_("PROMISC,"));
-+-    if (ptr->flags & IFF_ALLMULTI)
-+-	strcat(flags,_("ALLMULTI,"));
-+-    if (ptr->flags & IFF_SLAVE)
-+-	strcat(flags,_("SLAVE,"));
-+-    if (ptr->flags & IFF_MASTER)
-+-	strcat(flags,_("MASTER,"));
-+-    if (ptr->flags & IFF_MULTICAST)
-+-	strcat(flags,_("MULTICAST,"));
-+-#ifdef HAVE_DYNAMIC
-+-    if (ptr->flags & IFF_DYNAMIC)
-+-	strcat(flags,_("DYNAMIC,"));
-+-#endif
-+-    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short */
-+-    if (flags[strlen(flags)-1] == ',')
-+-      flags[strlen(flags)-1] = '>';
-+-    else
-+-      flags[strlen(flags)-1] = 0;
-+-      
-+-
-+-    printf(_("%s: %s  mtu %d  metric %d"),
-+-	   ptr->name, flags, ptr->mtu, ptr->metric ? ptr->metric : 1);
-+-#ifdef SIOCSKEEPALIVE
-+-    if (ptr->outfill || ptr->keepalive)
-+-	printf(_("  outfill %d  keepalive %d"),
-+-	       ptr->outfill, ptr->keepalive);
-++    printf(_("%-9s Link encap:%s  "), ptr->name, hw->title);
-++    /* For some hardware types (eg Ash, ATM) we don't print the 
-++       hardware address if it's null.  */
-++    if (hw->print != NULL && (! (hw_null_address(hw, ptr->hwaddr) &&
-++				  hw->suppress_null_addr)))
-++	printf(_("HWaddr %s  "), hw->print(ptr->hwaddr));
-++#ifdef IFF_PORTSEL
-++    if (ptr->flags & IFF_PORTSEL) {
-++	printf(_("Media:%s"), if_port_text[ptr->map.port][0]);
-++	if (ptr->flags & IFF_AUTOMEDIA)
-++	    printf(_("(auto)"));
-++    }
-+ #endif
-+     printf("\n");
-+ 
-+-
-+-
-+ #if HAVE_AFINET
-+     if (ptr->has_ip) {
-+-	printf(_("        %s %s"), ap->name,
-++	printf(_("          %s addr:%s "), ap->name,
-+ 	       ap->sprint(&ptr->addr, 1));
-+-	printf(_("  netmask %s"), ap->sprint(&ptr->netmask, 1));
-+-	if (ptr->flags & IFF_BROADCAST) {
-+-	    printf(_("  broadcast %s"), ap->sprint(&ptr->broadaddr, 1));
-+-	}
-+ 	if (ptr->flags & IFF_POINTOPOINT) {
-+-	    printf(_("  destination %s"), ap->sprint(&ptr->dstaddr, 1));
-++	    printf(_(" P-t-P:%s "), ap->sprint(&ptr->dstaddr, 1));
-+ 	}
-+-	printf("\n");
-++	if (ptr->flags & IFF_BROADCAST) {
-++	    printf(_(" Bcast:%s "), ap->sprint(&ptr->broadaddr, 1));
-++	}
-++	printf(_(" Mask:%s\n"), ap->sprint(&ptr->netmask, 1));
-+     }
-+ #endif
-+ 
-+@@ -757,7 +718,7 @@ void ife_print_long(struct interface *pt
-+     /* FIXME: should be integrated into interface.c.   */
-+ 
-+     if ((f = fopen(_PATH_PROCNET_IFINET6, "r")) != NULL) {
-+-	while (fscanf(f, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %20s\n",
-++	while (fscanf(f, "%4s%4s%4s%4s%4s%4s%4s%4s %08x %02x %02x %02x %20s\n",
-+ 		      addr6p[0], addr6p[1], addr6p[2], addr6p[3],
-+ 		      addr6p[4], addr6p[5], addr6p[6], addr6p[7],
-+ 		  &if_idx, &plen, &scope, &dad_status, devname) != EOF) {
-+@@ -766,30 +727,29 @@ void ife_print_long(struct interface *pt
-+ 			addr6p[0], addr6p[1], addr6p[2], addr6p[3],
-+ 			addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
-+ 		inet6_aftype.input(1, addr6, (struct sockaddr *) &sap);
-+-		printf(_("        %s %s  prefixlen %d"),
-+-			inet6_aftype.name, 
-+-			inet6_aftype.sprint((struct sockaddr *) &sap, 1), 
-+-			plen);
-+-		printf(_("  scopeid 0x%x"), scope);
-+-
-+-		flags[0] = '<'; flags[1] = 0;
-+-		if (scope & IPV6_ADDR_COMPATv4) {
-+-		    	strcat(flags, _("compat,"));
-+-		    	scope -= IPV6_ADDR_COMPATv4;
-++		printf(_("          inet6 addr: %s/%d"),
-++		 inet6_aftype.sprint((struct sockaddr *) &sap, 1), plen);
-++		printf(_(" Scope:"));
-++		switch (scope) {
-++		case 0:
-++		    printf(_("Global"));
-++		    break;
-++		case IPV6_ADDR_LINKLOCAL:
-++		    printf(_("Link"));
-++		    break;
-++		case IPV6_ADDR_SITELOCAL:
-++		    printf(_("Site"));
-++		    break;
-++		case IPV6_ADDR_COMPATv4:
-++		    printf(_("Compat"));
-++		    break;
-++		case IPV6_ADDR_LOOPBACK:
-++		    printf(_("Host"));
-++		    break;
-++		default:
-++		    printf(_("Unknown"));
-+ 		}
-+-		if (scope == 0)
-+-			strcat(flags, _("global,"));
-+-		if (scope & IPV6_ADDR_LINKLOCAL)
-+-			strcat(flags, _("link,"));
-+-		if (scope & IPV6_ADDR_SITELOCAL)
-+-			strcat(flags, _("site,"));
-+-		if (scope & IPV6_ADDR_LOOPBACK)
-+-			strcat(flags, _("host,"));
-+-		if (flags[strlen(flags)-1] == ',')
-+-			flags[strlen(flags)-1] = '>';
-+-		else
-+-			flags[strlen(flags)-1] = 0;
-+-		printf("%s\n", flags);
-++		printf("\n");
-+ 	    }
-+ 	}
-+ 	fclose(f);
-+@@ -802,17 +762,17 @@ void ife_print_long(struct interface *pt
-+ 
-+     if (ipxtype != NULL) {
-+ 	if (ptr->has_ipx_bb)
-+-	    printf(_("        %s Ethernet-II   %s\n"),
-+-		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_bb, 1));
-++	    printf(_("          IPX/Ethernet II addr:%s\n"),
-++		   ipxtype->sprint(&ptr->ipxaddr_bb, 1));
-+ 	if (ptr->has_ipx_sn)
-+-	    printf(_("        %s Ethernet-SNAP %s\n"),
-+-		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_sn, 1));
-++	    printf(_("          IPX/Ethernet SNAP addr:%s\n"),
-++		   ipxtype->sprint(&ptr->ipxaddr_sn, 1));
-+ 	if (ptr->has_ipx_e2)
-+-	    printf(_("        %s Ethernet802.2 %s\n"),
-+-		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_e2, 1));
-++	    printf(_("          IPX/Ethernet 802.2 addr:%s\n"),
-++		   ipxtype->sprint(&ptr->ipxaddr_e2, 1));
-+ 	if (ptr->has_ipx_e3)
-+-	    printf(_("        %s Ethernet802.3 %s\n"),
-+-		   ipxtype->name, ipxtype->sprint(&ptr->ipxaddr_e3, 1));
-++	    printf(_("          IPX/Ethernet 802.3 addr:%s\n"),
-++		   ipxtype->sprint(&ptr->ipxaddr_e3, 1));
-+     }
-+ #endif
-+ 
-+@@ -821,7 +781,7 @@ void ife_print_long(struct interface *pt
-+ 	ddptype = get_afntype(AF_APPLETALK);
-+     if (ddptype != NULL) {
-+ 	if (ptr->has_ddp)
-+-	    printf(_("        %s %s\n"), ddptype->name, ddptype->sprint(&ptr->ddpaddr, 1));
-++	    printf(_("          EtherTalk Phase 2 addr:%s\n"), ddptype->sprint(&ptr->ddpaddr, 1));
-+     }
-+ #endif
-+ 
-+@@ -830,30 +790,53 @@ void ife_print_long(struct interface *pt
-+ 	ectype = get_afntype(AF_ECONET);
-+     if (ectype != NULL) {
-+ 	if (ptr->has_econet)
-+-	    printf(_("        %s %s\n"), ectype->name, ectype->sprint(&ptr->ecaddr, 1));
-++	    printf(_("          econet addr:%s\n"), ectype->sprint(&ptr->ecaddr, 1));
-+     }
-+ #endif
-+ 
-+-    /* For some hardware types (eg Ash, ATM) we don't print the 
-+-       hardware address if it's null.  */
-+-    if (hw->print != NULL && (! (hw_null_address(hw, ptr->hwaddr) &&
-+-				  hw->suppress_null_addr)))
-+-	printf(_("        %s %s"), hw->name, hw->print(ptr->hwaddr));
-+-    else
-+-	printf(_("        %s"), hw->name);
-+-    if (ptr->tx_queue_len != -1)
-+-    	printf(_("  txqueuelen %d"), ptr->tx_queue_len);
-+-    printf("  (%s)\n", hw->title);
-+-
-+-#ifdef IFF_PORTSEL
-+-    if (ptr->flags & IFF_PORTSEL) {
-+-	printf(_("        media %s"), if_port_text[ptr->map.port][0]);
-+-	if (ptr->flags & IFF_AUTOMEDIA)
-+-	    printf(_("autoselect"));
-+-    	printf("\n");
-+-    }
-++    printf("          ");
-++    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short, too */
-++    if (ptr->flags == 0)
-++	printf(_("[NO FLAGS] "));
-++    if (ptr->flags & IFF_UP)
-++	printf(_("UP "));
-++    if (ptr->flags & IFF_BROADCAST)
-++	printf(_("BROADCAST "));
-++    if (ptr->flags & IFF_DEBUG)
-++	printf(_("DEBUG "));
-++    if (ptr->flags & IFF_LOOPBACK)
-++	printf(_("LOOPBACK "));
-++    if (ptr->flags & IFF_POINTOPOINT)
-++	printf(_("POINTOPOINT "));
-++    if (ptr->flags & IFF_NOTRAILERS)
-++	printf(_("NOTRAILERS "));
-++    if (ptr->flags & IFF_RUNNING)
-++	printf(_("RUNNING "));
-++    if (ptr->flags & IFF_NOARP)
-++	printf(_("NOARP "));
-++    if (ptr->flags & IFF_PROMISC)
-++	printf(_("PROMISC "));
-++    if (ptr->flags & IFF_ALLMULTI)
-++	printf(_("ALLMULTI "));
-++    if (ptr->flags & IFF_SLAVE)
-++	printf(_("SLAVE "));
-++    if (ptr->flags & IFF_MASTER)
-++	printf(_("MASTER "));
-++    if (ptr->flags & IFF_MULTICAST)
-++	printf(_("MULTICAST "));
-++#ifdef HAVE_DYNAMIC
-++    if (ptr->flags & IFF_DYNAMIC)
-++	printf(_("DYNAMIC "));
-+ #endif
-+-
-++    /* DONT FORGET TO ADD THE FLAGS IN ife_print_short */
-++    printf(_(" MTU:%d  Metric:%d"),
-++	   ptr->mtu, ptr->metric ? ptr->metric : 1);
-++#ifdef SIOCSKEEPALIVE
-++    if (ptr->outfill || ptr->keepalive)
-++	printf(_("  Outfill:%d  Keepalive:%d"),
-++	       ptr->outfill, ptr->keepalive);
-++#endif
-++    printf("\n");
-+ 
-+     /* If needed, display the interface statistics. */
-+ 
-+@@ -862,8 +845,19 @@ void ife_print_long(struct interface *pt
-+ 	 *      not for the aliases, although strictly speaking they're shared
-+ 	 *      by all addresses.
-+ 	 */
-++	printf("          ");
-++
-++	printf(_("RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"),
-++	       ptr->stats.rx_packets, ptr->stats.rx_errors,
-++	       ptr->stats.rx_dropped, ptr->stats.rx_fifo_errors,
-++	       ptr->stats.rx_frame_errors);
-++	if (can_compress)
-++	    printf(_("             compressed:%lu\n"), ptr->stats.rx_compressed);
-++
-+ 	rx = ptr->stats.rx_bytes;  
-++	tx = ptr->stats.tx_bytes;
-+ 	short_rx = rx * 10;  
-++	short_tx = tx * 10;
-+ 	if (rx > 1125899906842624ull) {
-+ 	    short_rx /= 1125899906842624ull;
-+ 	    Rext = "PiB";
-+@@ -880,8 +874,6 @@ void ife_print_long(struct interface *pt
-+ 	    short_rx /= 1024;
-+ 	    Rext = "KiB";
-+ 	}
-+-	tx = ptr->stats.tx_bytes;
-+-	short_tx = tx * 10;
-+ 	if (tx > 1125899906842624ull) {
-+ 	    short_tx /= 1125899906842624ull;
-+ 	    Text = "PiB";
-+@@ -899,50 +891,37 @@ void ife_print_long(struct interface *pt
-+ 	    Text = "KiB";
-+ 	}
-+ 
-+-	printf("        ");
-+-	printf(_("RX packets %llu  bytes %llu (%lu.%lu %s)\n"), 
-+-		ptr->stats.rx_packets, 
-+-	       rx, (unsigned long)(short_rx / 10), 
-+-	       (unsigned long)(short_rx % 10), Rext);
-+-	if (can_compress) {
-+-  	    printf("        ");
-+-	    printf(_("RX compressed:%lu\n"), ptr->stats.rx_compressed);
-+-	}
-+-	printf("        ");
-+-	printf(_("RX errors %lu  dropped %lu  overruns %lu  frame %lu\n"),
-+-	       ptr->stats.rx_errors, ptr->stats.rx_dropped, 
-+-	       ptr->stats.rx_fifo_errors, ptr->stats.rx_frame_errors);
-+-
-+-
-+-	printf("        ");
-+-	printf(_("TX packets %llu  bytes %llu (%lu.%lu %s)\n"),
-+-		ptr->stats.tx_packets, 
-+-	        tx, (unsigned long)(short_tx / 10), 
-+-	        (unsigned long)(short_tx % 10), Text);
-+-	if (can_compress) {
-+-  	    printf("        ");
-+-	    printf(_("TX compressed %lu\n"), ptr->stats.tx_compressed);
-+-	}
-+-	printf("        ");
-+-	printf(_("TX errors %lu  dropped %lu overruns %lu  carrier %lu  collisions %lu\n"),
-+-	       ptr->stats.tx_errors,
-++	printf("          ");
-++	printf(_("TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"),
-++	       ptr->stats.tx_packets, ptr->stats.tx_errors,
-+ 	       ptr->stats.tx_dropped, ptr->stats.tx_fifo_errors,
-+-	       ptr->stats.tx_carrier_errors, ptr->stats.collisions);
-++	       ptr->stats.tx_carrier_errors);
-++	printf(_("          collisions:%lu "), ptr->stats.collisions);
-++	if (can_compress)
-++	    printf(_("compressed:%lu "), ptr->stats.tx_compressed);
-++	if (ptr->tx_queue_len != -1)
-++	    printf(_("txqueuelen:%d "), ptr->tx_queue_len);
-++	printf("\n          ");
-++	printf(_("RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"),
-++	       rx, (unsigned long)(short_rx / 10), 
-++	       (unsigned long)(short_rx % 10), Rext, 
-++	       tx, (unsigned long)(short_tx / 10), 
-++	       (unsigned long)(short_tx % 10), Text);
-+     }
-+ 
-+     if ((ptr->map.irq || ptr->map.mem_start || ptr->map.dma ||
-+ 	 ptr->map.base_addr >= 0x100)) {
-+-	printf("        device ");
-++	printf("          ");
-+ 	if (ptr->map.irq)
-+-	    printf(_("interrupt %d  "), ptr->map.irq);
-++	    printf(_("Interrupt:%d "), ptr->map.irq);
-+ 	if (ptr->map.base_addr >= 0x100)	/* Only print devices using it for 
-+ 						   I/O maps */
-+-	    printf(_("base 0x%x  "), ptr->map.base_addr);
-++	    printf(_("Base address:0x%x "), ptr->map.base_addr);
-+ 	if (ptr->map.mem_start) {
-+-	    printf(_("memory 0x%lx-%lx  "), ptr->map.mem_start, ptr->map.mem_end);
-++	    printf(_("Memory:%lx-%lx "), ptr->map.mem_start, ptr->map.mem_end);
-+ 	}
-+ 	if (ptr->map.dma)
-+-	    printf(_("  dma 0x%x"), ptr->map.dma);
-++	    printf(_("DMA chan:%x "), ptr->map.dma);
-+ 	printf("\n");
-+     }
-+     printf("\n");
---- net-tools-1.60.orig/debian/patches/CVS-20061011-includes_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20061011-includes_sync.patch
-@@ -0,0 +1,113 @@
-+Sync with upstream CVS, complete log:
-+
-+2006-10-10 22:14  ecki
-+
-+	* util-ank.h: fixed signedness compiler warning
-+
-+2006-09-27 17:59  ecki
-+
-+	* mii.h: GigE Support by Stephen Hemminger from
-+	  http://developer.osdl.org/shemminger/prototypes/mii-tool.tar.bz2
-+	  with verbose register patch from Dean Gaudet
-+
-+2003-06-28 00:19  ecki
-+
-+	* mii.h: Use new style MII ioctls only. This will give you a
-+	  warning, if compiled with old kernel source tree. It will also
-+	  not work if compiled with new source on old kernels. The new
-+	  ioctls also require root for reading, the old didnt. This fixes
-+	  Debian bug #133648. No fallback compatibility is included for
-+	  reasons of cleaner source.
-+
-+2002-03-04 21:47  ecki
-+
-+	* interface.h: export procnetdev_version, get_dev_fields, get_name
-+	  from lib/interface.c for general usage (e.g. in my next patch to
-+	  iptunnel)
-+
-+2001-11-25 03:48  ecki
-+
-+	* interface.h: this fixes Debian Bug #109164 (netstat -ci does only
-+	  print stats once). It also renames add_interface and
-+	  free_interface list to if_cache_add/free.  I am not sure if
-+	  removing the "proc_read" flag will harm performance, looks likt
-+	  this check is never triggereed. Anyway, we need more efficient
-+	  b-search sooner or later.
-+
-+--- net-tools-1.60.orig/include/util-ank.h
-++++ net-tools-1.60/include/util-ank.h
-+@@ -75,6 +75,6 @@
-+ extern int do_class(int argc, char **argv);
-+ extern int do_filter(int argc, char **argv);
-+ 
-+-extern const char *format_host(int af, void *addr, __u8 *abuf, int alen);
-++extern const char *format_host(int af, void *addr, char *abuf, int alen);
-+ 
-+ #endif /* __UTILS_H__ */
-+--- net-tools-1.60.orig/include/mii.h
-++++ net-tools-1.60/include/mii.h
-+@@ -6,11 +6,14 @@
-+  * Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
-+  */
-+ 
-+-#ifndef _LINUX_MII_H
-+-#define _LINUX_MII_H
-++#ifndef _NETTOOL_MII_H
-++#define _NETTOOLS_MII_H
-++
-++#include <linux/sockios.h>
-+ 
-+ /* network interface ioctl's for MII commands */
-+ #ifndef SIOCGMIIPHY
-++#warning "SIOCGMIIPHY is not defined by your kernel source"
-+ #define SIOCGMIIPHY (SIOCDEVPRIVATE)	/* Read from current PHY */
-+ #define SIOCGMIIREG (SIOCDEVPRIVATE+1) 	/* Read any PHY register */
-+ #define SIOCSMIIREG (SIOCDEVPRIVATE+2) 	/* Write any PHY register */
-+@@ -38,6 +41,7 @@
-+ #define  MII_BMCR_RESTART	0x0200
-+ #define  MII_BMCR_DUPLEX	0x0100
-+ #define  MII_BMCR_COLTEST	0x0080
-++#define  MII_BMCR_SPEED1000	0x0040
-+ 
-+ /* Basic Mode Status Register */
-+ #define MII_BMSR		0x01
-+@@ -83,4 +87,17 @@
-+ #define  MII_ANER_PAGE_RX	0x0002
-+ #define  MII_ANER_LP_AN_ABLE	0x0001
-+ 
-+-#endif /* _LINUX_MII_H */
-++#define MII_CTRL1000		0x09
-++#define   MII_BMCR2_1000FULL	0x0200
-++#define   MII_BMCR2_1000HALF	0x0100
-++
-++#define MII_STAT1000		0x0a
-++#define   MII_LPA2_1000LOCALOK  0x2000
-++#define   MII_LPA2_1000REMRXOK	0x1000
-++#define   MII_LPA2_1000FULL	0x0800
-++#define   MII_LPA2_1000HALF	0x0400
-++
-++/* Last register we need for show_basic_mii() */
-++#define MII_BASIC_MAX          (MII_STAT1000+1)
-++
-++#endif /* _NETTOOLS_MII_H */
-+--- net-tools-1.60.orig/include/interface.h
-++++ net-tools-1.60/include/interface.h
-+@@ -64,13 +64,17 @@
-+ extern int if_fetch(struct interface *ife);
-+ 
-+ extern int for_all_interfaces(int (*)(struct interface *, void *), void *);
-+-extern int free_interface_list(void);
-++extern int if_cache_free(void);
-+ extern struct interface *lookup_interface(char *name);
-+ extern int if_readlist(void);
-+ 
-+ extern int do_if_fetch(struct interface *ife);
-+ extern int do_if_print(struct interface *ife, void *cookie);
-+ 
-++extern int    procnetdev_version(char *buf);
-++extern int    get_dev_fields(char *bp, struct interface *ife);
-++extern char * get_name(char *name, char *p);
-++
-+ extern void ife_print(struct interface *ptr);
-+ 
-+ extern int ife_short;
---- net-tools-1.60.orig/debian/patches/CVS-20031011-hostname.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20031011-hostname.c_sync.patch
-@@ -0,0 +1,97 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.12 - Sat Oct 11 21:08:10 2003 UTC by ecki
-+Maik Broemme contributed gcc warning fixes (break after default: label)
-+
-+Revision 1.11 - Thu Jun 12 03:22:30 2003 UTC by ecki
-+make hostname compile warnign free with gcc 3.3 (Ec)
-+
-+Index: net-tools/hostname.c
-+===================================================================
-+--- net-tools.orig/hostname.c
-++++ net-tools/hostname.c
-+@@ -9,20 +9,19 @@
-+  *              dnsdmoainname   
-+  *              nisdomainname {name|-F file}
-+  *
-+- * Version:     hostname 1.96 (1996-02-18)
-++ * Version:     hostname 1.101 (2003-10-11)
-+  *
-+  * Author:      Peter Tobias <tobias@et-inf.fho-emden.de>
-+  *
-+  * Changes:
-+- *      {1.90}  Peter Tobias :          Added -a and -i options.
-+- *      {1.91}  Bernd Eckenfels :       -v,-V rewritten, long_opts 
-+- *                                      (major rewrite), usage.
-+- *960120 {1.95} Bernd Eckenfels :       -y/nisdomainname - support for get/
-+- *                                      setdomainname added 
-+- *960218 {1.96} Bernd Eckenfels :       netinet/in.h added
-+- *980629 {1.97} Arnaldo Carvalho de Melo : gettext instead of catgets for i18n
-+- *20000213 {1.99} Arnaldo Carvalho de Melo : fixed some i18n strings
-++ *         {1.90}  Peter Tobias : Added -a and -i options.
-++ *         {1.91}  Bernd Eckenfels : -v,-V rewritten, long_opts (major rewrite), usage.
-++ *19960120 {1.95}  Bernd Eckenfels : -y/nisdomainname - support for get/setdomainname added 
-++ *19960218 {1.96}  Bernd Eckenfels : netinet/in.h added
-++ *19980629 {1.97}  Arnaldo Carvalho de Melo : gettext instead of catgets for i18n
-++ *20000213 {1.99}  Arnaldo Carvalho de Melo : fixed some i18n strings
-+  *20010404 {1.100} Arnaldo Carvalho de Melo: use setlocale
-++ *20031011 {1.101} Maik Broemme: gcc 3.x fixes (default: break)
-+  *
-+  *              This program is free software; you can redistribute it
-+  *              and/or  modify it under  the terms of  the GNU General
-+@@ -31,7 +30,9 @@
-+  *              your option) any later version.
-+  */
-+ #include <stdio.h>
-++#include <stdlib.h>
-+ #include <unistd.h>
-++#include <stdlib.h>
-+ #include <getopt.h>
-+ #include <string.h>
-+ #include <netdb.h>
-+@@ -78,6 +79,7 @@ static void setnname(char *nname)
-+             fprintf(stderr, _("%s: name too long\n"), program_name);
-+             break;
-+         default:
-++	    break;
-+         }
-+ 	exit(1);
-+     }
-+@@ -97,7 +99,6 @@ static void sethname(char *hname)
-+ 	case EINVAL:
-+ 	    fprintf(stderr, _("%s: name too long\n"), program_name);
-+ 	    break;
-+-	default:
-+ 	}
-+ 	exit(1);
-+     };
-+@@ -116,7 +117,6 @@ static void setdname(char *dname)
-+ 	case EINVAL:
-+ 	    fprintf(stderr, _("%s: name too long\n"), program_name);
-+ 	    break;
-+-	default:
-+ 	}
-+ 	exit(1);
-+     };
-+@@ -173,7 +173,6 @@ static void showhname(char *hname, int c
-+ 	    *p = '\0';
-+ 	printf("%s\n", hp->h_name);
-+ 	break;
-+-    default:
-+     }
-+ }
-+ 
-+@@ -326,11 +325,12 @@ int main(int argc, char **argv)
-+ 	    break;
-+ 	case 'V':
-+ 	    version();
-++	    break; // not reached
-+ 	case '?':
-+ 	case 'h':
-+ 	default:
-+ 	    usage();
-+-
-++	    break; // not reached
-+ 	};
-+ 
-+ 
---- net-tools-1.60.orig/debian/patches/Bug#254243-netstat.c-wide-opt.patch
-+++ net-tools-1.60/debian/patches/Bug#254243-netstat.c-wide-opt.patch
-@@ -0,0 +1,113 @@
-+This patch adds the --wide option to netstat, to avoid truncation of ipv6
-+addresses, by Luar Roji. (Bug #254243)
-+
-+Already in upstream's CVS (rev 1.60)
-+
-+Index: net-tools/man/en_US/netstat.8
-+===================================================================
-+--- net-tools.orig/man/en_US/netstat.8
-++++ net-tools/man/en_US/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Modified: Tuan Hoang tqhoang@bigfoot.com 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-++.TH NETSTAT 8 "2008-11-16" "net\-tools" "Linux Programmer's Manual"
-+ 
-+ .SH NAME
-+ netstat \- Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships
-+@@ -118,6 +118,9 @@ Display summary statistics for each prot
-+ .SS "\-\-verbose , \-v"
-+ Tell the user what is going on by being verbose. Especially print some
-+ useful information about unconfigured address families.
-++.SS "\-\-wide , \-W"
-++Do not truncate IP addresses by using output as wide as needed. This is
-++optional for now to not break existing scripts.
-+ .SS "\-\-numeric , \-n"
-+ Show numerical addresses instead of trying to determine symbolic host, port
-+ or user names.
-+Index: net-tools/netstat.c
-+===================================================================
-+--- net-tools.orig/netstat.c
-++++ net-tools/netstat.c
-+@@ -149,6 +149,7 @@ int flag_udp = 0;
-+ int flag_igmp= 0;
-+ int flag_rom = 0;
-+ int flag_exp = 1;
-++int flag_wide= 0;
-+ int flag_prg = 0;
-+ int flag_arg = 0;
-+ int flag_ver = 0;
-+@@ -782,16 +783,20 @@ static void tcp_do_one(int lnr, const ch
-+ 		 get_sname(htons(local_port), "tcp",
-+ 			   flag_not & FLAG_NUM_PORT));
-+ 
-+-	if ((strlen(local_addr) + strlen(buffer)) > 22)
-+-	    local_addr[22 - strlen(buffer)] = '\0';
-++	if (!flag_wide) {
-++	    if ((strlen(local_addr) + strlen(buffer)) > 22)
-++		local_addr[22 - strlen(buffer)] = '\0';
-++	}
-+ 
-+ 	strcat(local_addr, ":");
-+ 	strcat(local_addr, buffer);
-+ 	snprintf(buffer, sizeof(buffer), "%s",
-+ 		 get_sname(htons(rem_port), "tcp", flag_not & FLAG_NUM_PORT));
-+ 
-+-	if ((strlen(rem_addr) + strlen(buffer)) > 22)
-+-	    rem_addr[22 - strlen(buffer)] = '\0';
-++	if (!flag_wide) {
-++	    if ((strlen(rem_addr) + strlen(buffer)) > 22)
-++		rem_addr[22 - strlen(buffer)] = '\0';
-++	}
-+ 
-+ 	strcat(rem_addr, ":");
-+ 	strcat(rem_addr, buffer);
-+@@ -1511,9 +1516,9 @@ static void version(void)
-+ 
-+ static void usage(void)
-+ {
-+-    fprintf(stderr, _("usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--help}\n"));
-+-    fprintf(stderr, _("       netstat [-vnNcaeol] [<Socket> ...]\n"));
-+-    fprintf(stderr, _("       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n\n"));
-++    fprintf(stderr, _("usage: netstat [-vWeenNcCF] [<Af>] -r         netstat {-V|--version|-h|--help}\n"));
-++    fprintf(stderr, _("       netstat [-vWnNcaeol] [<Socket> ...]\n"));
-++    fprintf(stderr, _("       netstat { [-vWeenNac] -i | [-cWnNe] -M | -s }\n\n"));
-+ 
-+     fprintf(stderr, _("        -r, --route              display routing table\n"));
-+     fprintf(stderr, _("        -i, --interfaces         display interface table\n"));
-+@@ -1523,6 +1528,7 @@ static void usage(void)
-+     fprintf(stderr, _("        -M, --masquerade         display masqueraded connections\n\n"));
-+ #endif
-+     fprintf(stderr, _("        -v, --verbose            be verbose\n"));
-++    fprintf(stderr, _("        -W, --wide               don't truncate IP addresses\n"));
-+     fprintf(stderr, _("        -n, --numeric            don't resolve names\n"));
-+     fprintf(stderr, _("        --numeric-hosts          don't resolve host names\n"));
-+     fprintf(stderr, _("        --numeric-ports          don't resolve port names\n"));
-+@@ -1572,6 +1578,7 @@ int main
-+ 	{"programs", 0, 0, 'p'},
-+ 	{"verbose", 0, 0, 'v'},
-+ 	{"statistics", 0, 0, 's'},
-++	{"wide", 0, 0, 'W'},
-+ 	{"numeric", 0, 0, 'n'},
-+ 	{"numeric-hosts", 0, 0, '!'},
-+ 	{"numeric-ports", 0, 0, '@'},
-+@@ -1591,7 +1598,7 @@ int main
-+     getroute_init();		/* Set up AF routing support */
-+ 
-+     afname[0] = '\0';
-+-    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuVv?wxl64", longopts, &lop)) != EOF)
-++    while ((i = getopt_long(argc, argv, "MCFA:acdegphinNorstuWVv?wxl64", longopts, &lop)) != EOF)
-+ 	switch (i) {
-+ 	case -1:
-+ 	    break;
-+@@ -1635,6 +1642,9 @@ int main
-+ 	case 'i':
-+ 	    flag_int++;
-+ 	    break;
-++	case 'W':
-++	    flag_wide++;
-++	    break;
-+ 	case 'n':
-+ 	    flag_not |= FLAG_NUM;
-+ 	    break;
---- net-tools-1.60.orig/debian/patches/CVS-20081002-manpages_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20081002-manpages_sync.patch
-@@ -0,0 +1,1398 @@
-+Sync from upstream's CVS for all manpages. Full log:
-+
-+2008-10-02 20:16  ecki
-+
-+	* en_US/: arp.8, ethers.5, hostname.1, ifconfig.8, mii-tool.8,
-+	  nameif.8, netstat.8, plipconfig.8, rarp.8, route.8, slattach.8:
-+	  Fix hypen in man pages (Debian Bug#288343 from Andrew Moise) Move
-+	  man pages to sysadmin books update samples for route(8) (Debian
-+	  Bug#400844, #368697 Danny Rathjens) update see also for
-+	  ifconfig(8) (Debian Bug#365916 Dan Jacobs)
-+
-+2008-10-02 19:42  ecki
-+
-+	* en_US/arp.8: fix some more hypens, changed book name and updated
-+	  date to 2008-10-03
-+
-+2008-10-02 19:30  ecki
-+
-+	* en_US/netstat.8: document the additional info in Send-Q/Recv-Q
-+	  with recent kernels for listening sockets.
-+
-+2008-06-16 21:18  ecki
-+
-+	* en_US/arp.8: Spelling error (Debian Bug #486448 reported by
-+	  Volker Stolz)
-+
-+2007-12-02 01:42  ecki
-+
-+	* de_DE/netstat.8, en_US/netstat.8, fr_FR/netstat.8,
-+	  pt_BR/netstat.8: fixed interfaceS spelling (Debian Bug #435690).
-+	  Thanks Alan and Liu Xing.
-+
-+2007-12-01 15:19  ecki
-+
-+	* en_US/arp.8: cleanup man page (arp.8 2007-12-01)
-+
-+2007-11-07 20:01  ecki
-+
-+	* en_US/ifconfig.8: Fix Formatting Bug for ifconfig.8 (Debian
-+	  Bug#450432 reported by Ivan Shmakov)
-+
-+2006-10-10 02:58  ecki
-+
-+	* en_US/slattach.8: formatting fixes from Justin Pryzby in Debian
-+	  Bug #391495
-+
-+2005-09-04 00:51  ecki
-+
-+	* en_US/slattach.8 (tags: net-tools-1_65): Spelling fix for Debian
-+	  Bug#326124 reported by A. Costa.
-+
-+2005-06-30 16:26  ecki
-+
-+	* en_US/ifconfig.8: minor formatting
-+
-+2005-06-30 15:42  ecki
-+
-+	* en_US/ifconfig.8: added pointer to iptables(8) not only
-+	  ipchains(8) (Toralf Förster)
-+
-+2005-05-16 01:30  ecki
-+
-+	* en_US/arp.8: desupport dontpub in arp.8 and arp -? (Debian Bug
-+	  #203396)
-+
-+2005-05-13 19:34  ecki
-+
-+	* en_US/ethers.5: line break fix debian bug #305637
-+
-+2005-05-13 19:31  ecki
-+
-+	* en_US/mii-tool.8: spellig fix debian bug #305638
-+
-+2005-05-13 19:28  ecki
-+
-+	* en_US/route.8: spelling fix debian bug #305640
-+
-+2004-06-29 17:28  ecki
-+
-+	* en_US/netstat.8 (tags: net-tools-1_65): little formatting fix
-+
-+2004-03-28 18:35  ecki
-+
-+	* en_US/mii-tool.8 (tags: net-tools-1_65): added diagnostics
-+	  (closes debian bug #239229: EINVAL for downed interface)
-+
-+2003-10-02 17:06  ecki
-+
-+	* en_US/: netstat.8, route.8 (tags: net-tools-1_65): fixes for man
-+	  page bugs reported by Hugh Redelmeier.
-+
-+2003-05-28 17:59  ecki
-+
-+	* en_US/: ifconfig.8 (tags: net-tools-1_65), netstat.8: fixed
-+	  wording of binary units counters and interpunctuation in
-+	  netstat(8)
-+
-+2003-02-25 18:03  ecki
-+
-+	* en_US/ifconfig.8: Marc Lehmann pointed out that binary prefixes
-+	  are made up by the IEEE and are not official SI yet. (Debian Bug
-+	  #182478)
-+
-+2003-02-08 19:49  ecki
-+
-+	* en_US/ifconfig.8: add a comment about alias interfaces and
-+	  primary interface of scopes (intended to fix Debian wishlist bug
-+	  #179780 and normal bug #64458)
-+
-+2002-07-03 20:40  ecki
-+
-+	* en_US/ifconfig.8: there is no such thing as -i option for
-+	  ifconfig removed variable, fixed usage, added options to english
-+	  man page
-+
-+2002-02-20 11:31  ecki
-+
-+	* de_DE/netstat.8 (tags: net-tools-1_65): fixed typo in german man
-+	  page and added a comment that man page is currently not
-+	  completely up-to-date.
-+
-+2001-11-24 02:56  ecki
-+
-+	* de_DE/netstat.8, en_US/netstat.8: fixed minor errors in netstat.8
-+	  man page (--numeric-users was missing, some font problems and
-+	  --interfaces has no <interface> argument (Debian Bug #120475)
-+	  thanks for the report to Uwe Hermann.
-+
-+2001-11-11 22:46  ecki
-+
-+	* en_US/ifconfig.8: added documentation about SI prefixes for
-+	  decimal numbers
-+
-+2001-11-05 10:12  ecki
-+
-+	* en_US/rarp.8, fr_FR/arp.8, fr_FR/hostname.1, fr_FR/ifconfig.8,
-+	  fr_FR/netstat.8, fr_FR/rarp.8, pt_BR/rarp.8 (utags:
-+	  net-tools-1_65): changed troff syntax according to ESR's report
-+
-+2001-11-05 10:07  ecki
-+
-+	* en_US/arp.8 (tags: net-tools-1_65): fixed troff syntax, as
-+	  reported by ESR. Did not changed the date of the man page.
-+
-+2001-06-29 04:47  ecki
-+
-+	* en_US/ifconfig.8: made man page more useful and added right link
-+	  for irq conflicts in ifconfig.8
-+
-+2001-06-29 00:50  ecki
-+
-+	* fr_FR/netstat.8: man page fix CLOSED -> CLOSE
-+
-+2001-06-29 00:15  ecki
-+
-+	* en_US/netstat.8: fixed CLOSED -> CLOSE in french and english
-+	  manpage as of bug report from Matthew Tippett
-+
-+Index: net-tools/man/de_DE/netstat.8
-+===================================================================
-+--- net-tools.orig/man/de_DE/netstat.8
-++++ net-tools/man/de_DE/netstat.8
-+@@ -9,7 +9,7 @@
-+ .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "6. M\(:arz 1999" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-++.TH NETSTAT 8 "2007-12-02" "net-tools" "Handbuch f\(:ur Linuxprogrammierer"
-+ 
-+ .SH NAME
-+ netstat \- Anzeige von Netzwerksverbindungen, Routentabellen, Schnittstellenstatistiken, maskierten Verbindungen, Netlink-Nachrichten und Mitgliedschaft in Multicastgruppen
-+@@ -44,7 +44,6 @@ netstat \- Anzeige von Netzwerksverbindu
-+ .B netstat
-+ .RB [ \-veenpac ]
-+ .RB { \-\-interfaces | \-i }
-+-.RI [ Schnittstelle ]
-+ 
-+ .PP
-+ 
-+@@ -68,6 +67,8 @@ netstat \- Anzeige von Netzwerksverbindu
-+ .SH BESCHREIBUNG
-+ .B Netstat
-+ zeigt Informationen des Linux Netzwerkssystems an.
-++.PP
-++.B Bitte beachten Sie, dass der Inhalt der deutschen man-page nicht vollst\(:andig ist, im Moment.
-+ 
-+ .SS "(no option)"
-+ Ohne Optionen zeigt
-+@@ -103,18 +104,17 @@ benutzt das Ausgabeformat von
-+ Wegen Details siehe
-+ .BR route (8).
-+ 
-+-.SS "\-i, \-\-interface \fISchnittstelle\fI"
-++.SS "\-i, \-\-interfaces"
-+ Wird die
-+ .BR -i ", " --interfaces
-+-Option verwendet,  so wird eine Tabelle aller (oder der angegebenen
-+-.IR Schnittstellen ) 
-++Option verwendet,  so wird eine Tabelle aller Schnittstellen
-+ ausgedruckt.  Die Ausgabe ist im Format von
-+ .B "ifconfig -e"
-+ und wird in
-+ .BR ifconfig (8)
-+ beschrieben.
-+ .B "netstat -ei" 
-+-druckt eine Tabelle oder einen Eintrag f\(:ur einen einzelnes Interface wie
-++druckt eine Tabelle f\(:ur Interfaces wie
-+ .BR ifconfig .
-+ Die
-+ .B -a
-+@@ -182,7 +182,7 @@ Dies hat den gleichen Effekt wie die Lan
-+ und
-+ .BR \-\-ddp.
-+ 
-+-.SS "\-c, \-\-continous"
-++.SS "\-c, \-\-continuous"
-+ Mit dieser Option wiederholt
-+ .B netstat
-+ im Sekundenabstand die Ausgabe, bis es abgebrochen wird.
-+Index: net-tools/man/en_US/arp.8
-+===================================================================
-+--- net-tools.orig/man/en_US/arp.8
-++++ net-tools/man/en_US/arp.8
-+@@ -1,56 +1,111 @@
-+-.TH ARP 8 "5 Jan 1999" "net-tools" "Linux Programmer's Manual"
-++.TH ARP 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ arp \- manipulate the system ARP cache
-+ .SH SYNOPSIS
-+ .B arp 
-+ .RB [ \-vn ] 
-+-.RB [ "\-H type" ] 
-+-.RB [ "-i if" ] 
-+-.B -a 
-+-.RB [ hostname ]
-++.RB [ \-H 
-++.IR type ] 
-++.RB [ \-i
-++.IR if ] 
-++.RB [ \-a ] 
-++.RI [ hostname ]
-+ .PP
-+ .B arp 
-+ .RB [ \-v ]
-+-.RB [ "\-i if" ] 
-+-.B "\-d hostname"
-++.RB [ \-i
-++.IR if ] 
-++.B \-d 
-++.I hostname
-+ .RB [ pub ]
-+ .PP
-+ .B arp 
-+ .RB [ \-v ] 
-+-.RB [ "\-H type" ] 
-+-.RB [ "\-i if" ] 
-+-.B -s hostname hw_addr
-++.RB [ \-H
-++.IR type ] 
-++.RB [ \-i
-++.IR if ] 
-++.B \-s
-++.I hostname hw_addr
-+ .RB [ temp ] 
-+ .PP
-+ .B arp 
-+ .RB [ \-v ] 
-+-.RB [ "\-H type" ] 
-+-.RB [ "\-i if" ] 
-+-.B -s hostname hw_addr
-+-.RB [ "netmask nm" ] 
-++.RB [ \-H
-++.IR type ] 
-++.RB [ \-i
-++.IR if ] 
-++.B \-s
-++.I hostname hw_addr
-++.RB [ netmask
-++.IR nm ] 
-+ .B pub
-+ .PP
-+ .B arp 
-+ .RB [ \-v ] 
-+-.RB [ "\-H type" ] 
-+-.RB [ "\-i if" ] 
-+-.B -Ds hostname ifa
-+-.RB [ "netmask nm" ] 
-++.RB [ \-H
-++.IR type ] 
-++.RB [ \-i
-++.IR if ] 
-++.B \-Ds 
-++.I hostname
-++.I ifname
-++.RB [ netmask
-++.IR nm ] 
-+ .B pub
-+ .PP
-+ .B arp 
-+ .RB [ \-vnD ]
-+-.RB [ "\-H type" ] 
-+-.RB [ "-i if" ]
-+-.B -f [filename]
-++.RB [ \-H 
-++.IR type ] 
-++.RB [ \-i
-++.IR if ]
-++.B \-f 
-++.RI [ filename ]
-+ 
-+ .SH DESCRIPTION
-+ .B Arp
-+-manipulates the kernel's ARP cache in various ways.  The primary options
-+-are clearing an address mapping entry and manually setting up one.  For
-+-debugging purposes, the
-++manipulates or displays the kernel's IPv4 network neighbour cache. It can add
-++entries to the table, delete one or display the current content.
-++
-++.B ARP
-++stands for Address Resolution Protocol, which is used to find the media
-++access control address of a network neighbour for a given IPv4 Address.
-++.SH MODES
-+ .B arp
-+-program also allows a complete dump of the ARP cache.
-++with no mode specifier will print the current content of the table. It is
-++possible to limit the number of entries printed, by specifying an hardware
-++address type, interface name or host address.
-++
-++.B arp -d
-++.I address
-++will delete a ARP table entry. Root or netadmin priveledge is required to do
-++this. The entry is found by IP address. If a hostname is given, it will be
-++resolved before looking up the entry in the ARP table.
-++
-++.B arp -s
-++.I address hw_addr
-++is used to set up a new table entry. The format of the 
-++.I hw_addr
-++parameter is dependent on the hardware class, but for most classes one can
-++assume that the usual presentation can be used.  For the Ethernet class,
-++this is 6 bytes in hexadecimal, separated by colons. When adding proxy arp
-++entries (that is those with the
-++.BR pub lish 
-++flag set a 
-++.B netmask 
-++may be specified to proxy arp for entire subnets. This is not good
-++practice, but is supported by older kernels because it can be
-++useful. If the
-++.B temp
-++flag is not supplied entries will be permanent stored into the ARP
-++cache. To simplyfy setting up entries for one of your own network interfaces, you can use the
-++.B "arp \-Ds"
-++.I address ifname
-++form. In that case the hardware address is taken from the interface with the
-++specified name.
-++
-++.br
-+ .SH OPTIONS
-+ .TP
-+ .B "\-v, \-\-verbose"
-+@@ -60,7 +115,7 @@ Tell the user what is going on by being 
-+ shows numerical addresses instead of trying to determine symbolic host, port
-+ or user names.
-+ .TP
-+-.B "\-H type, \-\-hw-type type"
-++.B "\-H type, \-\-hw\-type type"
-+ When setting or reading the ARP cache, this optional parameter tells
-+ .B arp
-+ which class of entries it should check for.  The default value of
-+@@ -76,21 +131,13 @@ Other values might include network techn
-+ and
-+ .RB "NET/ROM (" netrom ")."
-+ .TP
-+-.B "\-a [hostname], \-\-display [hostname]"
-+-Shows the entries of the specified hosts.  If the
-+-.B hostname
-+-parameter is not used,
-+-.B all
-+-entries will be displayed.
-+-.TP
-+-.B "\-d hostname, \-\-delete hostname"
-+-Remove any entry for the specified host.  This can be used if the
-+-indicated host is brought down, for example.
-++.B \-a
-++Use alternate BSD style output format (with no fixed columns).
-+ .TP
-+ .B "\-D, \-\-use-device"
-+-Use the interface
-+-.BR ifa "'s"
-+-hardware address.
-++Instead of a hw_addr, the given argument is the name of an interface. 
-++.B arp
-++will use the MAC address of that interface for the table entry. This is usually the best option to set up a proxy ARP entry to yourself.
-+ .TP
-+ .B "\-i If, \-\-device If"
-+ Select an interface. When dumping the ARP cache only entries matching
-+@@ -106,33 +153,15 @@ be answered. 
-+ .B NOTE:
-+ This has to be different from the interface to which the IP
-+ datagrams will be routed.
-+-.TP
-+-.B "\-s hostname hw_addr, \-\-set hostname"
-+-Manually create an ARP address mapping entry for host
-+-.B hostname
-+-with hardware address set to
-+-.B hw_addr
-+-.  The format of the hardware address is dependent on the hardware
-+-class, but for most classes one can assume that the usual presentation
-+-can be used.  For the Ethernet class, this is 6 bytes in hexadecimal,
-+-separated by colons. When adding proxy arp entries (that is those with
-+-the 
-+-.BR pub lish 
-+-flag set a 
-+-.B netmask 
-+-may be specified to proxy arp for entire subnets. This is not good
-+-practice, but is supported by older kernels because it can be
-+-useful. If the
-+-.B temp
-+-flag is not supplied entries will be permanent stored into the ARP
-+-cache.
-+-.br
-+ .B NOTE:
-+ As of kernel 2.2.0 it is no longer possible to set an ARP entry for an 
-+ entire subnet. Linux instead does automagic proxy arp when a route
-+ exists and it is forwarding. See 
-+ .BR arp (7)
-+-for details.
-++for details. Also the
-++.B dontpub
-++option which is available for delete and set operations cannot be 
-++used with 2.4 and newer kernels.
-+ .TP
-+ .B "\-f filename, \-\-file filename"
-+ Similar to the
-+@@ -167,8 +196,18 @@ flag. Permanent entries are marked with
-+ and published entries have the
-+ .B P
-+ flag.
-++.SH EXAMPLES
-++.B /usr/sbin/arp -i eth0 -Ds 10.0.0.2 eth1 pub
-++
-++This will answer ARP requests for 10.0.0.2 on eth0 with the MAC address for
-++eth1.
-++
-++.B /usr/sbin/arp -i eth1 -d 10.0.0.1
-++
-++Delete the ARP table entry for 10.0.0.1 on interface eth1. This will match
-++published proxy ARP entries and permanent entries.
-+ .SH FILES
-+-.I /proc/net/arp,
-++.I /proc/net/arp
-+ .br
-+ .I /etc/networks
-+ .br
-+@@ -178,5 +217,4 @@ flag.
-+ .SH SEE ALSO
-+ rarp(8), route(8), ifconfig(8), netstat(8)
-+ .SH AUTHORS
-+-Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> with a lot of improvements
-+-from net-tools Maintainer Bernd Eckenfels <net-tools@lina.inka.de>.
-++Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>, Bernd Eckenfels <net\-tools@lina.inka.de>.
-+Index: net-tools/man/en_US/ethers.5
-+===================================================================
-+--- net-tools.orig/man/en_US/ethers.5
-++++ net-tools/man/en_US/ethers.5
-+@@ -1,4 +1,4 @@
-+-.TH ETHERS 5 "April 26th, 1996" "" "File formats"
-++.TH ETHERS 5 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME \"{{{roff}}}\"{{{
-+ ethers \- Ethernet address to IP number database
-+ .\"}}}
-+@@ -7,17 +7,17 @@ ethers \- Ethernet address to IP number 
-+ IP numbers, one line for each IP number:
-+ .sp
-+ .RS
-+-\fIEthernet-address\fP  \fIIP-number\fP
-++\fIEthernet\-address\fP  \fIIP\-number\fP
-+ .RE
-+ .sp
-+-The two items are separated by any number of SPACE and/or TAB char
-+-acters.   A \fB#\fP at the beginning of a line starts a comment
-+-which extends to the end of the line.  The \fIEthernet-address\fP is
-++The two items are separated by any number of SPACE and/or TAB characters.
-++A \fB#\fP at the beginning of a line starts a comment
-++which extends to the end of the line.  The \fIEthernet\-address\fP is
-+ written as
-+ .IR x : x : x : x : x : x ,
-+ where \fIx\fP is a hexadecimal number between \fB0\fP and \fBff\fP
-+ which represents one byte of the address, which is in network byte
-+-order (big-endian).  The \fIIP-number\fP may be a hostname which
-++order (big-endian).  The \fIIP\-number\fP may be a hostname which
-+ can be resolved by DNS or a dot separated number.
-+ .\"}}}
-+ .SH EXAMPLES \"{{{
-+Index: net-tools/man/en_US/hostname.1
-+===================================================================
-+--- net-tools.orig/man/en_US/hostname.1
-++++ net-tools/man/en_US/hostname.1
-+@@ -1,4 +1,4 @@
-+-.TH HOSTNAME 1 "28 Jan 1996" "net-tools" "Linux Programmer's Manual"
-++.TH HOSTNAME 1 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ 
-+ .SH NAME
-+ hostname \- show or set the system's host name
-+@@ -23,7 +23,7 @@ nodename \- show or set the system's DEC
-+ .RB [ \-f ]
-+ .RB [ \-\-fqdn ]
-+ .RB [ \-i ]
-+-.RB [ \-\-ip-address ]
-++.RB [ \-\-ip\-address ]
-+ .RB [ \-\-long ]
-+ .RB [ \-s ]
-+ .RB [ \-\-short ]
-+@@ -181,7 +181,7 @@ part of the FQDN) in the \fI/etc/hosts\f
-+ .I "\-h, \-\-help"
-+ Print a usage message and exit.
-+ .TP
-+-.I "\-i, \-\-ip-address"
-++.I "\-i, \-\-ip\-address"
-+ Display the IP address(es) of the host.
-+ .TP
-+ .I "\-n, \-\-node"
-+@@ -205,9 +205,9 @@ Display the NIS domain name. If a parame
-+ .SH FILES
-+ .B /etc/hosts
-+ .SH AUTHOR
-+-Peter Tobias, <tobias@et-inf.fho-emden.de>
-++Peter Tobias, <tobias@et\-inf.fho\-emden.de>
-+ .br
-+-Bernd Eckenfels, <net-tools@lina.inka.de> (NIS and manpage).
-++Bernd Eckenfels, <net\-tools@lina.inka.de> (NIS and manpage).
-+ .br
-+ Steve Whitehouse, <SteveW@ACM.org> (DECnet support and manpage).
-+ 
-+Index: net-tools/man/en_US/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/en_US/ifconfig.8
-++++ net-tools/man/en_US/ifconfig.8
-+@@ -1,10 +1,10 @@
-+-.TH IFCONFIG 8 "14 August 2000" "net-tools" "Linux Programmer's Manual"
-++.TH IFCONFIG 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ ifconfig \- configure a network interface
-+ .SH SYNOPSIS
-+-.B "ifconfig [interface]"
-++.B "ifconfig [-v] [-a] [-s] [interface]"
-+ .br
-+-.B "ifconfig interface [aftype] options | address ..."
-++.B "ifconfig [-v] interface [aftype] options | address ..."
-+ .SH DESCRIPTION
-+ .B Ifconfig
-+ is used to configure the kernel-resident network interfaces.  It is
-+@@ -18,7 +18,7 @@ a single
-+ .B interface
-+ argument is given, it displays the status of the given interface
-+ only; if a single
-+-.B -a
-++.B \-a
-+ argument is given, it displays the status of all interfaces, even
-+ those that are down.  Otherwise, it configures an interface.
-+ 
-+@@ -41,11 +41,27 @@ supported address families include
-+ (AMPR Packet radio).
-+ .SH OPTIONS
-+ .TP
-++.B -a
-++display all interfaces which are currently available, even if down
-++.TP
-++.B -s
-++display a short list (like netstat -i)
-++.TP
-++.B -v
-++be more verbose for some error conditions
-++.TP
-+ .B interface
-+ The name of the interface.  This is usually a driver name followed by
-+ a unit number, for example
-+ .B eth0
-+-for the first Ethernet interface.
-++for the first Ethernet interface. If your kernel supports alias interfaces,
-++you can specify them with 
-++.B eth0:0
-++for the first alias of eth0. You can use them to assign a second address. To
-++delete an alias interface use
-++.BR "ifconfig eth0:0 down" .
-++Note: for every scope (i.e. same net with address/netmask combination) all
-++aliases are deleted, if you delete the first (primary).
-+ .TP
-+ .B up
-+ This flag causes the interface to be activated.  It is implicitly
-+@@ -122,13 +138,13 @@ are 
-+ can be used to tell the driver to auto-sense the media.  Again, not
-+ all drivers can do this.
-+ .TP
-+-.B "[-]broadcast [addr]"
-++.B "[\-]broadcast [addr]"
-+ If the address argument is given, set the protocol broadcast
-+ address for this interface.  Otherwise, set (or clear) the
-+ .B IFF_BROADCAST
-+ flag for the interface.
-+ .TP
-+-.B "[-]pointopoint [addr]"
-++.B "[\-]pointopoint [addr]"
-+ This keyword enables the
-+ .B point-to-point
-+ mode of an interface, meaning that it is a direct link between two
-+@@ -173,11 +189,20 @@ alias interfaces anymore. The statistics
-+ are shared with all alias addresses on the same device. If you want per-address
-+ statistics you should add explicit accounting
-+ rules for the address using the 
-+-.BR ipchains(8)
-++.BR ipchains (8)
-++or
-++.BR iptables (8)
-+ command.
-+ .LP
-+-Interrupt problems with Ethernet device drivers fail with EAGAIN. See
-+-.I http://cesdis.gsfc.nasa.gov/linux/misc/irq-conflict.html
-++Since net\-tools 1.60\-4 ifconfig is printing byte counters and human readable
-++counters with IEC 60027-2 units. So 1 KiB are 2^10 byte. Note, the numbers 
-++are truncated to one decimal (which can by quite a large error if you 
-++consider 0.1 PiB is 112.589.990.684.262 bytes :)
-++.LP
-++Interrupt problems with Ethernet device drivers fail with EAGAIN
-++.I (SIOCSIIFLAGS: Resource temporarily unavailable)
-++it is most likely a interrupt conflict. See
-++.I http://www.scyld.com/expert/irq\-conflict.html
-+ for more information.
-+ .SH FILES
-+ .I /proc/net/socket 
-+@@ -189,7 +214,9 @@ for more information.
-+ While appletalk DDP and IPX addresses will be displayed they cannot be
-+ altered by this command.
-+ .SH SEE ALSO
-+-route(8), netstat(8), arp(8), rarp(8), ipchains(8)
-++route(8), netstat(8), arp(8), rarp(8), ipchains(8), iptables(8), ifup(8), interfaces(5).
-++.br
-++http://physics.nist.gov/cuu/Units/binary.html - Prefixes for binary multiples
-+ .SH AUTHORS
-+ Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+ .br
-+@@ -198,3 +225,5 @@ Alan Cox, <Alan.Cox@linux.org>
-+ Phil Blundell, <Philip.Blundell@pobox.com>
-+ .br
-+ Andi Kleen
-++.br
-++Bernd Eckenfels, <net\-tools@lina.inka.de>
-+Index: net-tools/man/en_US/mii-tool.8
-+===================================================================
-+--- net-tools.orig/man/en_US/mii-tool.8
-++++ net-tools/man/en_US/mii-tool.8
-+@@ -1,13 +1,13 @@
-+ .\" Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
-+ .\" mii-tool.8 1.5 2000/04/25 22:58:19
-+ .\"
-+-.TH MII-TOOL 8 "2000/04/25 22:58:19" "net-tools"
-++.TH MII\-TOOL 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ 
-+ .SH NAME
-+-mii-tool \- view, manipulate media-independent interface status
-++mii\-tool \- view, manipulate media-independent interface status
-+ 
-+ .SH SYNOPSIS
-+-.B mii-tool
-++.B mii\-tool
-+ [\fB\-v\fR, \fB\-\-verbose\fR]
-+ [\fB\-V\fR, \fB\-\-version\fR]
-+ [\fB\-R\fR, \fB\-\-reset\fR]
-+@@ -32,12 +32,12 @@ single-speed hubs, are unable to autoneg
-+ devices, the MII protocol also allows for establishing a link by
-+ simply detecting either a 10baseT or 100baseT link beat.  The \fB\-F\fR
-+ or \fB\-\-force\fR options can be used to force the MII to operate in
-+-one mode, instead of autonegotiating.  The \fB\-A\fR and \fB-F\fR
-++one mode, instead of autonegotiating.  The \fB\-A\fR and \fB\-F\fR
-+ options are mutually exclusive.
-+ .PP
-+ The default short output reports the negotiated link speed and link
-+ status for each interface.  If an interface or interfaces are not
-+-specified on the command line, then \fBmii-tool\fR will check any
-++specified on the command line, then \fBmii\-tool\fR will check any
-+ available interfaces from \fBeth0\fR through \fBeth7\fR.
-+ .SH OPTIONS
-+ .TP
-+@@ -59,7 +59,7 @@ Watch interface(s) and report changes in
-+ interfaces are polled at one second intervals.
-+ .TP
-+ \fB\-l\fR, \fB\-\-log\fR
-+-Used with \fB-w\fR, records link status changes in the system log
-++Used with \fB\-w\fR, records link status changes in the system log
-+ instead of printing on standard output.
-+ .TP
-+ \fB\-F\fI media\fR, \fB\-\-force=\fImedia\fR
-+@@ -72,7 +72,24 @@ media technologies.  Multiple technologi
-+ commas.  Valid media are \fB100baseT4\fR, \fB100baseTx-FD\fR,
-+ \fB100baseTx-HD\fR, \fB10baseT-FD\fR, and \fB10baseT-HD\fR.
-+ 
-++.SH DIAGNOSTICS
-++.TP
-++SIOCGMIIPHY on 'eth?' failed: Invalid argument
-++If the interface is not running (up), kernel will refuse to report its link state.
-++.TP
-++SIOCGMIIPHY on 'eth?' failed: Operation not permitted
-++Most kernels restrict access to root.
-++.TP
-++SIOCGMIIPHY on 'eth?' failed: No such device
-++This error is shown, if the kernel does not know about the named device.
-++.TP
-++SIOCGMIIPHY on 'eth?' failed: Operation not supported 
-++The interface in question does not support MII queries. Most likely, it does not have 
-++MII transceivers, at all.
-++
-+ .SH AUTHORS
-+ David Hinds \- dhinds@pcmcia.sourceforge.org
-+ .br
-+ Donald Becker \- becker@scyld.com
-++.br
-++Bernd Eckenfels \- ecki@debian.org
-+Index: net-tools/man/en_US/nameif.8
-+===================================================================
-+--- net-tools.orig/man/en_US/nameif.8
-++++ net-tools/man/en_US/nameif.8
-+@@ -1,10 +1,10 @@
-+-.TH NAMEIF 8 "18 Oct 2000" "net-tools" "Linux's Administrator's Manual"
-++.TH NAMEIF 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ nameif \- name network interfaces based on MAC addresses
-+ .SH SYNOPSIS
-+-.B "nameif [-c configfile] [-s]"
-++.B "nameif [\-c configfile] [\-s]"
-+ .br
-+-.B "nameif [-c configfile] [-s] {interface macaddress}"
-++.B "nameif [\-c configfile] [\-s] {interface macaddress}"
-+ .SH DESCRIPTION
-+ .B nameif 
-+ renames network interfaces based on mac addresses. When no arguments are
-+@@ -18,11 +18,11 @@ looks for the interface with the given M
-+ name given.
-+ 
-+ When the 
-+-.I -s
-++.I \-s
-+ argument is given all error messages go to the syslog.
-+ 
-+ When the 
-+-.I -c 
-++.I \-c 
-+ argument is given with a file name that file is read instead of /etc/mactab.
-+ 
-+ .SH NOTES
-+Index: net-tools/man/en_US/netstat.8
-+===================================================================
-+--- net-tools.orig/man/en_US/netstat.8
-++++ net-tools/man/en_US/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Modified: Tuan Hoang tqhoang@bigfoot.com 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "19 December 2000" "net-tools" "Linux Programmer's Manual"
-++.TH NETSTAT 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ 
-+ .SH NAME
-+ netstat \- Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships
-+@@ -23,7 +23,7 @@ netstat \- Print network connections, ro
-+ .RB [ \-\-listening | \-l ]
-+ .RB [ \-\-all | \-a ]
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-++.RB [ \-\-numeric\-hosts "] [" \-\-numeric\-ports "] [" \-\-numeric\-users ]
-+ .RB [ \-\-symbolic | \-N ]
-+ .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
-+ .RB [ \-\-timers | \-o ]
-+@@ -37,31 +37,30 @@ netstat \- Print network connections, ro
-+ .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
-+ .RB [ \-\-verbose | \-v ]
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-++.RB [ \-\-numeric\-hosts "] [" \-\-numeric\-ports "] [" \-\-numeric\-users ]
-+ .RB [ \-\-continuous | \-c]
-+ .P
-+ .B netstat
-+ .RB { \-\-interfaces | \-i }
-+-.RI [ iface ]
-+ .RB [ \-\-all | \-a ]
-+ .RB [ \-\-extend | \-e  [ \-\-extend | \-e] ]
-+ .RB [ \-\-verbose | \-v ]
-+ .RB [ \-\-program | \-p ]
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-++.RB [ \-\-numeric-hosts "] [" \-\-numeric-ports "] [" \-\-numeric-users ]
-+ .RB [ \-\-continuous | \-c]
-+ .P
-+ .B netstat
-+ .RB { \-\-groups | \-g }
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-++.RB [ \-\-numeric\-hosts "] [" \-\-numeric\-ports "] [" \-\-numeric\-users ]
-+ .RB [ \-\-continuous | \-c]
-+ .P
-+ .B netstat
-+ .RB { \-\-masquerade | \-M }
-+ .RB [ \-\-extend | \-e ]
-+ .RB [ \-\-numeric | \-n ]
-+-.RB [ \-\-numeric-hosts ] [ \-\-numeric-ports ] [ \-\-numeric-ports ]
-++.RB [ \-\-numeric\-hosts "] [" \-\-numeric\-ports "] [" \-\-numeric\-users ]
-+ .RB [ \-\-continuous | \-c]
-+ .P
-+ .B netstat
-+@@ -78,6 +77,8 @@ netstat \- Print network connections, ro
-+ .P
-+ .IR address_family_options :
-+ .PP
-++.RB [ -4 ]
-++.RB [ -6 ]
-+ .RB [ \-\-protocol= { inet , unix , ipx , ax25 , netrom , ddp }[, ...] ]
-+ .RB [ \-\-unix | \-x ] 
-+ .RB [ \-\-inet | \-\-ip ]
-+@@ -98,12 +99,17 @@ displays a list of open sockets.  If you
-+ address families, then the active sockets of all configured address
-+ families will be printed.
-+ .SS "\-\-route , \-r"
-+-Display the kernel routing tables.
-++Display the kernel routing tables. See the description in 
-++.BR route (8) 
-++for details. 
-++.B netstat -r 
-++and 
-++.B route -e 
-++produce the same output.
-+ .SS "\-\-groups , \-g"
-+ Display multicast group membership information for IPv4 and IPv6.
-+-.SS "\-\-interface=\fIiface \fR, \fB\-i"
-+-Display a table of all network interfaces, or the specified
-+-.IR iface ) .
-++.SS "\-\-interfaces, \-i"
-++Display a table of all network interfaces.
-+ .SS "\-\-masquerade , \-M"
-+ Display a list of masqueraded connections.
-+ .SS "\-\-statistics , \-s"
-+@@ -115,13 +121,13 @@ useful information about unconfigured ad
-+ .SS "\-\-numeric , \-n"
-+ Show numerical addresses instead of trying to determine symbolic host, port
-+ or user names.
-+-.SS "\-\-numeric-hosts"
-++.SS "\-\-numeric\-hosts"
-+ shows numerical host addresses but does not affect the resolution of
-+ port or user names.
-+-.SS "\-\-numeric-ports"
-++.SS "\-\-numeric\-ports"
-+ shows numerical port numbers but does not affect the resolution of
-+ host or user names.
-+-.SS "\-\-numeric-users"
-++.SS "\-\-numeric\-users"
-+ shows numerical user IDs but does not affect the resolution of host or
-+ port names.
-+ 
-+@@ -164,23 +170,24 @@ Show the PID and name of the program to 
-+ Show only listening sockets.  (These are omitted by default.)
-+ .SS "\-a, \-\-all"
-+ Show both listening and non-listening sockets.  With the
-+-.B --interfaces
-+-option, show interfaces that are not marked 
-++.B \-\-interfaces
-++option, show interfaces that are not up
-+ .SS "\-F"
-+ Print routing information from the FIB.  (This is the default.)
-+ .SS "\-C"
-+ Print routing information from the route cache.
-+-.IR UP .
-+ .P
-+ .SH OUTPUT
-+ .P
-+ .SS Active Internet connections \fR(TCP, UDP, raw)\fR
-+ .SS "Proto" 
-+ The protocol (tcp, udp, raw) used by the socket. 
-+-.SS "Recv-Q"
-+-The count of bytes not copied by the user program connected to this socket.
-+-.SS "Send-Q"
-+-The count of bytes not acknowledged by the remote host.
-++.SS "Recv\-Q"
-++Established: The count of bytes not copied by the user program connected to this socket.
-++Listening: Since Kernel 2.6.18 this column contains the current syn backlog.
-++.SS "Send\-Q"
-++Established: The count of bytes not acknowledged by the remote host.
-++Listening: Since Kernel 2.6.18 this column contains the maximum size of the syn backlog.
-+ .SS "Local Address" 
-+ Address and port number of the local end of the socket.  Unless the
-+ .BR \-\-numeric " (" \-n )
-+@@ -221,7 +228,7 @@ TIME_WAIT
-+ The socket is waiting after close to handle packets still in the network.
-+ .TP
-+ .I
-+-CLOSED
-++CLOSE
-+ The socket is not being used.
-+ .TP
-+ .I
-+@@ -255,7 +262,7 @@ The username or the user id (UID) of the
-+ .SS "PID/Program name"
-+ Slash-separated pair of the process id (PID) and process name of the 
-+ process that owns the socket.
-+-.B --program
-++.B \-\-program
-+ causes this column to be included.  You will also need
-+ .I superuser
-+ privileges to see this information on sockets you don't own.  This
-+@@ -358,7 +365,7 @@ to the socket.
-+ .PP
-+ .SH NOTES
-+ Starting with Linux release 2.2 
-+-.B netstat -i 
-++.B netstat \-i 
-+ does not show interface statistics for alias interfaces. To get per
-+ alias interface counters you need to setup explicit rules using the
-+ .BR ipchains(8) 
-+@@ -438,12 +445,12 @@ as it is viewed. This is unlikely to occ
-+ .P
-+ .SH AUTHORS
-+ The netstat user interface was written by Fred Baumgarten
-+-<dc6iq@insu1.etec.uni-karlsruhe.de> the man page basically
-++<dc6iq@insu1.etec.uni\-karlsruhe.de>, the man page basically
-+ by Matt Welsh <mdw@tc.cornell.edu>. It was updated by
-+ Alan Cox <Alan.Cox@linux.org> but could do with a bit more
-+ work.  It was updated again by Tuan Hoang
-+ <tqhoang@bigfoot.com>.
-+ .br
-+-The man page and the command included in the net-tools
-++The man page and the command included in the net\-tools
-+ package is totally rewritten by Bernd Eckenfels 
-+ <ecki@linux.de>.
-+Index: net-tools/man/en_US/plipconfig.8
-+===================================================================
-+--- net-tools.orig/man/en_US/plipconfig.8
-++++ net-tools/man/en_US/plipconfig.8
-+@@ -1,4 +1,4 @@
-+-.TH PLIPCONFIG 8 "17 February 1995" "" ""
-++.TH PLIPCONFIG 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ plipconfig \- fine tune PLIP device parameters 
-+ .SH SYNOPSIS
-+Index: net-tools/man/en_US/rarp.8
-+===================================================================
-+--- net-tools.orig/man/en_US/rarp.8
-++++ net-tools/man/en_US/rarp.8
-+@@ -1,20 +1,20 @@
-+-.TH RARP 8 "4 August 1997" "net-tools" "Linux Programmer's Manual"
-++.TH RARP 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ rarp \- manipulate the system RARP table
-+ .SH SYNOPSIS
-+-.B "rarp [-V] [--version] [-h] [--help]"
-++.B "rarp [\-V] [\-\-version] [\-h] [\-\-help]"
-+ .br
-+-.B "rarp -a"
-++.B "rarp \-a"
-+ .br
-+-.B "rarp [-v] -d hostname ..."
-++.B "rarp [\-v] \-d hostname ..."
-+ .br
-+-.B "rarp [-v] [-t type] -s hostname hw_addr"
-++.B "rarp [\-v] [\-t type] \-s hostname hw_addr"
-+ .SH NOTE
-+ .P
-+ This program is obsolete.  From version 2.3, the Linux kernel 
-+ no longer contains RARP support.  For a replacement RARP daemon, see
-+ .I
-+-ftp://ftp.dementia.org/pub/net-tools
-++ftp://ftp.dementia.org/pub/net\-tools
-+ .SH DESCRIPTION
-+ .B Rarp
-+ manipulates the kernel's RARP table in various ways.  The primary options
-+@@ -61,8 +61,8 @@ Remove all RARP entries for the specifie
-+ Create a RARP address mapping entry for host
-+ .B hostname
-+ with hardware address set to
-+-.B hw_addr
-+-.  The format of the hardware address is dependent on the hardware
-++.BR hw_addr .
-++The format of the hardware address is dependent on the hardware
-+ class, but for most classes one can assume that the usual presentation
-+ can be used.  For the Ethernet class, this is 6 bytes in hexadecimal,
-+ separated by colons.
-+Index: net-tools/man/en_US/route.8
-+===================================================================
-+--- net-tools.orig/man/en_US/route.8
-++++ net-tools/man/en_US/route.8
-+@@ -1,4 +1,4 @@
-+-.TH ROUTE 8 "2 January 2000" "net-tools" "Linux Programmer's Manual"
-++.TH ROUTE 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ route \- show / manipulate the IP routing table
-+ .SH SYNOPSIS
-+@@ -51,7 +51,7 @@ If]
-+ .RB [ \-V ] 
-+ .RB [ \-\-version ]
-+ .RB [ \-h ]
-+-.RB [ \--help ]
-++.RB [ \-\-help ]
-+ .SH DESCRIPTION
-+ .B Route
-+ manipulates the kernel's IP routing tables.  Its primary use is to set
-+@@ -73,16 +73,16 @@ displays the current contents of the rou
-+ .SH OPTIONS
-+ .TP
-+ .B \-A family
-+-use the specified address family (eg `inet'; use `route --help' for a full 
-++use the specified address family (eg `inet'; use `route \-\-help' for a full 
-+ list).
-+ 
-+ .TP 
-+-.B -F
-++.B \-F
-+ operate on the kernel's FIB (Forwarding Information Base) routing
-+ table. 
-+ This is the default.
-+ .TP 
-+-.B -C
-++.B \-C
-+ operate on the kernel's routing cache.
-+ 
-+ .TP
-+@@ -96,7 +96,7 @@ nameserver has vanished.
-+ .TP
-+ .B \-e
-+ use
-+-.BR netstat (8)-format
-++.BR netstat (8)\-format
-+ for displaying the routing table.
-+ .B \-ee 
-+ will generate a very long line with all parameters from the routing table.
-+@@ -117,7 +117,7 @@ the
-+ .B target
-+ is a network.
-+ .TP
-+-.B -host
-++.B \-host
-+ the
-+ .B target 
-+ is a host.
-+@@ -141,7 +141,7 @@ set the metric field in the routing tabl
-+ set the TCP Maximum Segment Size (MSS) for connections over this route
-+ to M bytes. 
-+ The default is the device MTU minus headers, or a lower MTU when path mtu 
-+-discovery occured. This setting can be used to force smaller TCP packets on the
-++discovery occurred. This setting can be used to force smaller TCP packets on the
-+ other end when path mtu discovery does not work (usually because of
-+ misconfigured firewalls that block ICMP Fragmentation Needed)
-+ .TP 
-+@@ -179,24 +179,27 @@ modifiers (metric - netmask - gw - dev) 
-+ 
-+ .SH EXAMPLES
-+ .TP
-+-.B route add -net 127.0.0.0
-+-adds the normal loopback entry, using netmask 255.0.0.0 (class A net,
-+-determined from the destination address) and associated with the 
-+-"lo" device (assuming this device was prviously set up correctly with
-++.B route add \-net 127.0.0.0 netmask 255.0.0.0 dev lo
-++adds the normal loopback entry, using netmask 255.0.0.0 and associated with the 
-++"lo" device (assuming this device was previously set up correctly with
-+ .BR ifconfig (8)). 
-+ 
-+ .TP 
-+-.B route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
-+-adds a route to the network 192.56.76.x via 
-+-"eth0". The Class C netmask modifier is not really necessary here because
-+-192.* is a Class C IP address. The word "dev" can be omitted here. 
-++.B route add \-net 192.56.76.0 netmask 255.255.255.0 dev eth0
-++adds a route to the local network 192.56.76.x via 
-++"eth0".  The word "dev" can be omitted here. 
-+ 
-+ .TP
-+-.B route add default gw mango-gw
-++.B route del default
-++deletes the current default route, which is labeled "default" or 0.0.0.0
-++in the destination field of the current routing table.
-++
-++.TP
-++.B route add default gw mango\-gw
-+ adds a default route (which will be used if no other route matches).
-+-All packets using this route will be gatewayed through "mango-gw". The
-++All packets using this route will be gatewayed through "mango\-gw". The
-+ device which will actually be used for that route depends on how we
-+-can reach "mango-gw" - the static route to "mango-gw" will have to be
-++can reach "mango\-gw" - the static route to "mango\-gw" will have to be
-+ set up before. 
-+ 
-+ .TP
-+@@ -205,18 +208,18 @@ Adds the route to the "ipx4" host via th
-+ "ipx4" is the SLIP host).
-+ 
-+ .TP
-+-.B route add -net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-++.B route add \-net 192.57.66.0 netmask 255.255.255.0 gw ipx4
-+ This command adds the net "192.57.66.x" to be gatewayed through the former
-+ route to the SLIP interface.
-+ 
-+ .TP
-+-.B route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-++.B route add \-net 224.0.0.0 netmask 240.0.0.0 dev eth0
-+ This is an obscure one documented so people know how to do it. This sets
-+ all of the class D (multicast) IP routes to go via "eth0". This is the
-+ correct normal configuration line with a multicasting kernel. 
-+ 
-+ .TP
-+-.B route add -net 10.0.0.0 netmask 255.0.0.0 reject
-++.B route add \-net 10.0.0.0 netmask 255.0.0.0 reject
-+ This installs a rejecting route for the private network "10.x.x.x."
-+ 
-+ .LP
-+@@ -282,14 +285,14 @@ recent kernels, but may be needed by rou
-+ Number of references to this route. (Not used in the Linux kernel.)
-+ .TP
-+ .B Use
-+-Count of lookups for the route.  Depending on the use of -F and -C this will
-+-be either route cache misses (-F) or hits (-C).
-++Count of lookups for the route.  Depending on the use of \-F and \-C this will
-++be either route cache misses (\-F) or hits (\-C).
-+ .TP
-+ .B Iface
-+ Interface to which packets for this route will be sent.
-+ .TP
-+ .B MSS 
-+-Default maximum segement size for TCP connections over this route.
-++Default maximum segment size for TCP connections over this route.
-+ .TP
-+ .B Window  
-+ Default window size for TCP connections over this route.
-+@@ -323,4 +326,4 @@ for Linux was originally written by Fred
-+ Linus Torvalds for pl15. Alan Cox added the mss and window options for
-+ Linux 1.1.22. irtt support and merged with netstat from Bernd Eckenfels.
-+ .SH AUTHOR
-+-Currently maintained by Phil Blundell <Philip.Blundell@pobox.com>.
-++Currently maintained by Phil Blundell <Philip.Blundell@pobox.com> and Bernd Eckenfels <net-tools@lina.inka.de>.
-+Index: net-tools/man/en_US/slattach.8
-+===================================================================
-+--- net-tools.orig/man/en_US/slattach.8
-++++ net-tools/man/en_US/slattach.8
-+@@ -1,8 +1,8 @@
-+-.TH SLATTACH 8 "12 Feb 1994" "" ""
-++.TH SLATTACH 8 "2008\-10\-03" "net\-tools" "Linux System Administrator's Manual"
-+ .SH NAME
-+ slattach \- attach a network interface to a serial line
-+ .SH SYNOPSIS
-+-.B "slattach [-dehlLmnqv] [-c command] [-p proto] [-s speed] [tty]"
-++.B "slattach [\-dehlLmnqv] [\-c command] [\-p proto] [\-s speed] [tty]"
-+ .br
-+ .SH DESCRIPTION
-+ .B Slattach
-+@@ -11,47 +11,48 @@ is a tiny little program that can be use
-+ you to use it for point-to-point links to other computers.
-+ .SH OPTIONS
-+ .TP
-+-.B "[-c command]"
-++.B "[\-c command]"
-+ Execute
-+ .B command
-+ when the line is hung up. This can be used to run scripts or re-establish
-+ connections when a link goes down.
-+ .TP
-+-.B "[-d]"
-++.B "[\-d]"
-+ Enable debugging output.  Useful when determining why a given
-+ setup doesn't work.
-+ .TP
-+-.B "[-h]"
-++.B "[\-h]"
-+ Exit when the carrier is lost. This works on both /dev/tty and /dev/cua
-+ devices by directly monitoring the carrier status every 15 seconds.
-+-.B "[-v]"
-++.TP
-++.B "[\-v]"
-+ Enable verbose output.  Useful in shell scripts.
-+ .TP
-+-.B "[-q]"
-++.B "[\-q]"
-+ Operate in quiet mode - no messages at all.
-+ .TP
-+-.B "[-l]"
-++.B "[\-l]"
-+ Create an UUCP-style lockfile for the device in /var/lock.
-+ .TP
-+-.B "[-n]"
-++.B "[\-n]"
-+ Equivalent to the "mesg n" command.
-+ .TP
-+-.B "[-m]"
-++.B "[\-m]"
-+ Do \fBnot\fP initialize the line into 8 bits raw mode.
-+ .TP
-+-.B "[-e]"
-++.B "[\-e]"
-+ Exit right after initializing device, instead of waiting for the
-+-line to hangup.
-++line to hang up.
-+ .TP
-+-.B "[-L]"
-++.B "[\-L]"
-+ Enable 3 wire operation. The terminal is moved into CLOCAL mode, 
-+ carrier watching is disabled.
-+ .TP
-+-.B "[-p proto]"
-++.B "[\-p proto]"
-+ Set a specific kind of protocol to use on the line.  The default
-+ is set to
-+-.B "cslip"
-+-, i.e. compressed SLIP.  Other possible values are
-++.BR "cslip" ,
-++i.e. compressed SLIP.  Other possible values are
-+ .B "slip"
-+ (normal SLIP), 
-+ .B "adaptive"
-+@@ -70,7 +71,7 @@ to be active on the line. For kiss conne
-+ .B axattach
-+ program should be used.
-+ .TP
-+-.B "[-s speed]"
-++.B "[\-s speed]"
-+ Set a specific line speed, other than the default.
-+ .PP
-+ If no arguments are given, the current terminal line (usually: the
-+Index: net-tools/man/fr_FR/arp.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/arp.8
-++++ net-tools/man/fr_FR/arp.8
-+@@ -140,8 +140,8 @@ pour un sous réseau entier.
-+ Similaire à l'option 
-+ .B \-s
-+ , mais cette fois les informations d'adresses sont prises dans le fichier
-+-.B nom_de_fichier
-+-. Ceci peut être utilisé si les entrées ARP à configurer sont
-++.BR nom_de_fichier .
-++Ceci peut être utilisé si les entrées ARP à configurer sont
-+ nombreuses.  Le nom du fichier de données est très souvent nommé
-+ .B /etc/ethers
-+ , mais ce n'est pas officiel.
-+@@ -160,8 +160,8 @@ en notation décimale pointée.
-+ .LP
-+ Chaque entrée complète se trouvant dans le cache ARP est marquée de
-+ l'indicateur
-+-.B C
-+-. Les entrées permanentes sont marquées de l'indicateur
-++.BR C .
-++Les entrées permanentes sont marquées de l'indicateur
-+ .B M
-+ et les entrées 'pub' ont l'indicateur
-+ .B P
-+Index: net-tools/man/fr_FR/hostname.1
-+===================================================================
-+--- net-tools.orig/man/fr_FR/hostname.1
-++++ net-tools/man/fr_FR/hostname.1
-+@@ -84,8 +84,8 @@ Appelé sans argument, le programme affic
-+ .LP
-+ .B hostname
-+ fournit le nom du système tel qu'il est retourné par la fonction
-+-.BR getdomainname (2)
-+-. Ceci est connu comme nom de domaine YP/NIS du système.
-++.BR getdomainname (2).
-++Ceci est connu comme nom de domaine YP/NIS du système.
-+ 
-+ 
-+ .LP
-+@@ -145,8 +145,8 @@ Le nom de domaine DNS est la partie suiv
-+ .LP
-+ La façon dont vous pouvez le changer dépend de la configuration
-+ (habituellement dans 
-+-.IR /etc/host.conf )
-+-. Si le fichier 'hosts' est analysé avant d'interroger le DNS ou 
-++.IR /etc/host.conf ).
-++Si le fichier 'hosts' est analysé avant d'interroger le DNS ou 
-+ NIS) vous pouvez le changer dans le fichier 
-+ .IR /etc/hosts .
-+ 
-+Index: net-tools/man/fr_FR/ifconfig.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/ifconfig.8
-++++ net-tools/man/fr_FR/ifconfig.8
-+@@ -60,14 +60,14 @@ le signe moins (\-) est présent, l'optio
-+ .TP
-+ .B "[\-]promisc"
-+ Valide ou invalide le mode
-+-.B promiscuous
-+-.  S'il est validé, tous les paquets circulant sur le réseau
-++.BR promiscuous .
-++S'il est validé, tous les paquets circulant sur le réseau
-+ seront reçus sur cette interface.
-+ .TP
-+ .B "[\-]allmulti"
-+ Valide ou invalide le fonctionnement de l'interface en mode
-+-.B all-multicast
-+-.  S'il est validé, tous les paquets multicast circulant sur le réseau
-++.BR all-multicast .
-++S'il est validé, tous les paquets multicast circulant sur le réseau
-+ seront reçus sur cette interface.
-+ .TP
-+ .B "metric N"
-+Index: net-tools/man/fr_FR/netstat.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/netstat.8
-++++ net-tools/man/fr_FR/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Modified: Tuan Hoang tuan@optimus.mitre.org 
-+ .\"
-+ .\"
-+-.TH NETSTAT 8 "25 Fév 1999" "net-tools" "Linux Programmer's Manual"
-++.TH NETSTAT 8 "2007-12-02" "net-tools" "Linux Programmer's Manual"
-+ 
-+ .SH NAME
-+ netstat \- Affiche les connexions réseau, les tables de routage, les
-+@@ -106,7 +106,7 @@ Veuillez consulter
-+ .BR route (8)
-+ pour plus de détails.
-+ 
-+-.SS "\-i, \-\-interface \fIiface\fI"
-++.SS "\-i, \-\-interfaces \fIiface\fI"
-+ Si vous utilisez l'option
-+ .BR -i ", " --interfaces
-+ , une table de toutes (ou de l'interface
-+@@ -118,8 +118,8 @@ même que celui de la commande
-+ .BR ifconfig (8).
-+ .B "netstat -ei"
-+ affiche une table ou une seule entrée d'interface comme la commande 
-+-.B ifconfig
-+-. Avec le paramètre
-++.BR ifconfig .
-++Avec le paramètre
-+ .B -a
-+ , vous pouvez inclure les interfaces qui ne sont pas configurées (c.a.d qui
-+ n'ont pas l'indicateur
-+@@ -249,7 +249,7 @@ La socket attend le traitement de tous l
-+ avant d'entreprendre la fermeture.
-+ .TP
-+ .I
-+-CLOSED
-++CLOSE
-+ La socket n'est pas utilisée.
-+ .TP
-+ .I
-+@@ -409,8 +409,7 @@ Affiche le chemin correspondant à l'atta
-+ Depuis la version 2.2 du noyau, netstat -i n'affiche plus les statistiques
-+ des interfaces alias. Pour obtenir les compteurs par interface alias, vous
-+ devez définir des règles spécifiques à l'aide de la commande
-+-.BR ipchains(8) 
-+-.  
-++.BR ipchains (8).
-+ 
-+ .SH FICHIERS
-+ .ta
-+Index: net-tools/man/fr_FR/rarp.8
-+===================================================================
-+--- net-tools.orig/man/fr_FR/rarp.8
-++++ net-tools/man/fr_FR/rarp.8
-+@@ -55,8 +55,8 @@ Supprime toutes les entrées RARP relativ
-+ Crée manuellement une correspondance d'adresses RARP pour l'hôte
-+ .B nom_d_hôte
-+ avec l'adresse matérielle
-+-.B adr_materielle
-+-. Le format de l'adresse matérielle est dépendant du matériel,
-++.BR adr_materielle .
-++Le format de l'adresse matérielle est dépendant du matériel,
-+ mais pour la plupart on peut considérer que la présentation classique
-+ peut être utilisée.  Pour la classe Ethernet, c'est 6 octets en hexadécimal,
-+ séparés par des double-points.
-+Index: net-tools/man/pt_BR/netstat.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/netstat.8
-++++ net-tools/man/pt_BR/netstat.8
-+@@ -8,7 +8,7 @@
-+ .\" Traduzido para português por Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-+ .\" Revisado por Jorge Luiz Godoy Filho <jorge@bestway.com.br>
-+ .\"
-+-.TH NETSTAT 8 "19 de maio de 1997" "net-tools" "Manual do Programador Linux"
-++.TH NETSTAT 8 "2007-12-02" "net-tools" "Manual do Programador Linux"
-+ 
-+ .SH NOME
-+ netstat \- Mostra conexões de rede, tabelas de roteamento, estatísticas de interface e conexões
-+@@ -97,7 +97,7 @@ Por favor veja
-+ .BR route (8)
-+ para maiores detalhes.
-+ 
-+-.SS "\-i, \-\-interface \fIiface\fI"
-++.SS "\-i, \-\-interfaces \fIiface\fI"
-+ Se você usar a opção
-+ .BR -i ", " --interfaces
-+ , uma tabela de todas (ou da
-+Index: net-tools/man/pt_BR/rarp.8
-+===================================================================
-+--- net-tools.orig/man/pt_BR/rarp.8
-++++ net-tools/man/pt_BR/rarp.8
-+@@ -50,8 +50,8 @@ máquina indicada for desligada, por exem
-+ Cria um mapeamento de endereços RARP para a máquina
-+ .B máquina
-+ com endereço de hardware configurado para
-+-.B endereço_hardware
-+-.  O formato do endereço de hardware depende da classe do hardware, mas
-++.B endereço_hardware.
-++O formato do endereço de hardware depende da classe do hardware, mas
-+ para a maioria das classes você pode assumir que a apresentação usual pode
-+ ser usada.  Para a classe Ethernet, são 6 bytes em hexadecimal, separados
-+ por dois pontos (:).
---- net-tools-1.60.orig/debian/patches/translations.patch
-+++ net-tools-1.60/debian/patches/translations.patch
-@@ -0,0 +1,24458 @@
-+Probably unsyncable changes, extracted from diff.gz
-+
-+Index: net-tools/po/pt_BR.po
-+===================================================================
-+--- net-tools.orig/po/pt_BR.po
-++++ net-tools/po/pt_BR.po
-+@@ -10,275 +10,287 @@
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: net-tools 1.54\n"
-+-"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+ "PO-Revision-Date: 1999-03-01 02:38+0100\n"
-+ "Last-Translator: Arnaldo Carvalho de Melo <acme@conectiva.com.br>\n"
-+ "MIME-Version: 1.0\n"
-+-"Content-Type: text/plain; charset=ISO8859-9\n"
-++"Content-Type: text/plain; charset=ISO-8859-9\n"
-+ "Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:110 ../arp.c:269
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+ msgstr "arp: preciso do nome da máquina\n"
-+ 
-+-#: ../arp.c:207 ../arp.c:221
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+ msgstr "Nenhuma entrada ARP para %s\n"
-+ 
-+-#: ../arp.c:239
-++#: ../arp.c:248
-+ #, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr "arp: não foi possível obter o endereço de hardware para `%s': %s.\n"
-+ 
-+-#: ../arp.c:243
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr "arp: erro no tipo do protocolo.\n"
-+ 
-+-#: ../arp.c:252
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+ msgstr "arp: o dispositivo `%s' tem endereço de hardware %s `%s'.\n"
-+ 
-+-#: ../arp.c:282
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+ msgstr "arp: preciso do endereço de hardware\n"
-+ 
-+-#: ../arp.c:290
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr "arp: endereço inválido de hardware\n"
-+ 
-+-#: ../arp.c:387
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr "arp: não foi possível abrir o arquivo etherfile %s!\n"
-+ 
-+-#: ../arp.c:403
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr "arp: erro de formato na linha %u do arquivo etherfile %s!\n"
-+ 
-+-#: ../arp.c:416
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr "arp: não foi possível configurar a linha %u do arquivo etherfile %s!\n"
-+ 
-+-#: ../arp.c:437
-+-msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-++#: ../arp.c:448
-++#, fuzzy, c-format
-++msgid ""
-++"Address                  HWtype  HWaddress           Flags Mask            "
-++"Iface\n"
-+ msgstr "Endereço\t\tTipoHW\tEndereçoHW\t Flags Mascara\t\t Iface\n"
-+ 
-+-#: ../arp.c:467
-++#: ../arp.c:476
-++#, fuzzy
-++msgid "<from_interface>"
-++msgstr "%s: interface desconhecida.\n"
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+ msgstr "(incompleto)"
-+ 
-+-#: ../arp.c:484
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr "%s (%s) em "
-+ 
-+-#: ../arp.c:490
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr "<incompleto> "
-+ 
-+-#: ../arp.c:496
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr "mascara %s "
-+ 
-+-#: ../arp.c:513
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr "em %s\n"
-+ 
-+-#: ../arp.c:592
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr "Entradas: %d\tIgnorada: %d\tEncontrada: %d\n"
-+ 
-+-#: ../arp.c:596
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr "%s (%s) -- nenhuma entrada\n"
-+ 
-+-#: ../arp.c:598
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+ msgstr "arp: em %d entradas não foi encontrado.\n"
-+ 
-+-#: ../arp.c:613
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+ "cache\n"
-+ msgstr ""
-+ "Uso:\n"
-+-"  arp [-vn]  [<HW>] [-i <if>] [-a] [<máquina>]             <-Mostra cache "
-+-"ARP\n"
-++"  arp [-vn]  [<HW>] [-i <if>] [-a] [<máquina>]             <-Mostra cache ARP\n"
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:627
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+-msgstr ""
-+-"  arp [-v]          [-i <if>] -d  <máquina>  [pub][nopub]  <-Remove entrada "
-+-"ARP\n"
-++msgstr "  arp [-v]          [-i <if>] -d  <máquina>  [pub][nopub]  <-Remove entrada ARP\n"
-+ 
-+-#: ../arp.c:615
-++#: ../arp.c:628
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+ msgstr ""
-+ "  arp [-vnD] [<HW>] [-i <if>] -f  [<arquivo>]         <-Inclui entrada de "
-+ "arquivo\n"
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:629
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+-msgstr ""
-+-"  arp [-v] [<HW>] [-i <if>] -s <máquina> <end_hw> [temp][nopub] <-Inc. "
-+-"Entrada\n"
-+-
-+-#: ../arp.c:617
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <máquina> <end_hw>  [netmask <nm>] pub  "
-+-"<-''-\n"
-++msgstr "  arp [-v] [<HW>] [-i <if>] -s <máquina> <end_hw> [temp][nopub] <-Inc. Entrada\n"
-+ 
-+-#: ../arp.c:618
-++#: ../arp.c:630
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+-msgstr ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <máquina>  <if> [netmask <nm>] pub      "
-+-"<-''-\n"
-++msgstr "  arp [-v]   [<HW>] [-i <if>] -Ds <máquina>  <if> [netmask <nm>] pub      <-''-\n"
-+ 
-+-#: ../arp.c:620
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+-msgstr ""
-+-"        -a               mostra (todas as) máquinas no estilo alternativo "
-+-"(BSD)\n"
-++msgstr "        -a               mostra (todas as) máquinas no estilo alternativo (BSD)\n"
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr "        -s, --set                define uma nova entrada ARP\n"
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr "        -d, --delete             remove a entrada especificada\n"
-+ 
-+-#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr "        -v, --verbose           listagem detalhada\n"
-+ 
-+-#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
-+-msgid "        -n, --numeric            dont resolve names\n"
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, fuzzy, c-format
-++msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr "        -n, --numeric           não resolve nomes\n"
-+ 
-+-#: ../arp.c:625
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+ msgstr ""
-+ "        -i, --device             especifica a interface de rede (ex: eth0)\n"
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+ msgstr "        -D, --use-device         leia <hwaddr> de um dispositivo\n"
-+ 
-+-#: ../arp.c:627
-++#: ../arp.c:639
-++#, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr "        -A, -p, --protocol       especifica a família de protocolos\n"
-+ 
-+-#: ../arp.c:628
-++#: ../arp.c:640
-++#, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+-"        -f, --file             leia novas entradas de arquivo ou de "
-+-"/etc/ethers\n"
-++"        -f, --file             leia novas entradas de arquivo ou de /etc/"
-++"ethers\n"
-+ "\n"
-+ 
-+-#: ../arp.c:630 ../rarp.c:181
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+-msgstr ""
-+-" <HW>=Use '-H <hw>' para especificar o tipo de endereço de hw. Default: %s\n"
-++msgstr " <HW>=Use '-H <hw>' para especificar o tipo de endereço de hw. Default: %s\n"
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr "  Lista dos tipos de hardware possíveis (que suportam ARP):\n"
-+ 
-+-#: ../arp.c:664
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr "%s: tipo de hardware não suportado!\n"
-+ 
-+-#: ../arp.c:668
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr "%s: família de endereços não suportada!\n"
-+ 
-+-#: ../arp.c:703
-++#: ../arp.c:716
-++#, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr "arp: -N ainda não suportada.\n"
-+ 
-+-#: ../arp.c:713
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr "arp: %s: família de endereços desconhecida.\n"
-+ 
-+-#: ../arp.c:722
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr "arp: %s: tipo de hardware desconhecido.\n"
-+ 
-+-#: ../arp.c:741
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+ msgstr "arp: %s: kernel somente suporta ínet'.\n"
-+ 
-+-#: ../arp.c:746
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr "arp: %s: tipo de hardware sem suporte a ARP.\n"
-+ 
-+-#: ../hostname.c:69
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+ msgstr "Configurando nome do nó como `%s'\n"
-+ 
-+-#: ../hostname.c:74
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr "%s: você deve ser root para mudar o nome do nó\n"
-+ 
-+-#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr "%s: nome muito longo\n"
-+ 
-+-#: ../hostname.c:89
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+ msgstr "Configurando nome da máquina para `%s'\n"
-+ 
-+-#: ../hostname.c:94
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+ msgstr "%s: você deve ser root para mudar o nome da máquina\n"
-+ 
-+-#: ../hostname.c:108
-++#: ../hostname.c:109
-+ #, c-format
-+ msgid "Setting domainname to `%s'\n"
-+ msgstr "Configurando nome do domínio para `%s'\n"
-+ 
-+-#: ../hostname.c:113
-++#: ../hostname.c:114
-+ #, c-format
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr "%s: você deve ser root para mudar o nome do domínio\n"
-+@@ -303,37 +315,38 @@ msgstr "Resultado: h_aliases=`%s'\n"
-+ msgid "Result: h_addr_list=`%s'\n"
-+ msgstr "Resultado: h_addr_list=`%s'\n"
-+ 
-+-#: ../hostname.c:209
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+ msgstr "%s: não foi possível abrir `%s'\n"
-+ 
-+-#: ../hostname.c:223
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+-msgstr ""
-+-"Uso: hostname [-v] {máquina|-F arquivo}       configura nome da máquina (de "
-+-"arquivo)\n"
-++msgstr "Uso: hostname [-v] {máquina|-F arquivo}       configura nome da máquina (de arquivo)\n"
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+ msgstr ""
-+ "       domainname [-v] {domínio_nis|-F file} configura nome do domínio NIS\n"
-+ "                                             (a partir de arquivo)\n"
-+ 
-+-#: ../hostname.c:226
-++#: ../hostname.c:225
-++#, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+-msgstr ""
-+-"Uso: hostname [-v] {máquina|-F arquivo}   configura o nome do nó DECnet (de "
-+-"arquivo)\n"
-++msgstr "Uso: hostname [-v] {máquina|-F arquivo}   configura o nome do nó DECnet (de arquivo)\n"
-+ 
-+-#: ../hostname.c:228
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  mostra nome formatado\n"
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+@@ -341,7 +354,8 @@ msgstr ""
-+ "     hostname [-v]                            mostra nome da máquina\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+@@ -349,7 +363,8 @@ msgstr ""
-+ "     hostname -V|--version|-h|--help          mostra informações e termina\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+@@ -357,35 +372,43 @@ msgstr ""
-+ "    dnsdomainname=máquina -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr "    -s, --short           nome curto da máquina\n"
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr "    -a, --alias           aliases para a máquina\n"
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr "    -i, --ip-address      endereços da máquina\n"
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr "    -f, --fqdn, --long    nome longo da máquina (FQDN)\n"
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+ msgstr "    -d, --domain          nome do domínio DNS\n"
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+ msgstr "    -y, --yp, --nis       nome do domínio NIS/YP\n"
-+ 
-+-#: ../hostname.c:239
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+ msgstr "    -n, --node            nome do nó DECnet\n"
-+ 
-+-#: ../hostname.c:241
-++#: ../hostname.c:240
-++#, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+@@ -393,7 +416,8 @@ msgstr ""
-+ "    -F, --file            leia o nome da máquina ou domínio NIS do arquivo\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:243
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -413,15 +437,16 @@ msgid "%s: You can't change the DNS doma
-+ msgstr "%s: Você não pode mudar o nome do domínio DNS com este comando\n"
-+ 
-+ #: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+ msgstr ""
-+ "\n"
-+-"A menos que esteja usando bind ou NIS para resolução de nomes você pode "
-+-"mudar\n"
-++"A menos que esteja usando bind ou NIS para resolução de nomes você pode mudar\n"
-+ 
-+ #: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr "o nome do domínio DNS (que é parte do FQDN) no arquivo /etc/hosts.\n"
-+ 
-+@@ -440,552 +465,453 @@ msgstr "getdomainname()=`%s'\n"
-+ msgid "getnodename()=`%s'\n"
-+ msgstr "getnodename()=`%s'\n"
-+ 
-+-#: ../ifconfig.c:159
-+-#, c-format
-+-msgid "%-9.9s Link encap:%s  "
-+-msgstr "%-9.9s  Encapsulamento do Link: %s  "
-++#: ../ifconfig.c:107
-++#, fuzzy, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr "Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV Opções\n"
-+ 
-+-#: ../ifconfig.c:164
-+-#, c-format
-+-msgid "HWaddr %s  "
-+-msgstr "Endereço de HW %s  "
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, fuzzy, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr ""
-++"%s: erro obtendo informações da interface: %s\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:167
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-+ #, c-format
-+-msgid "Media:%s"
-+-msgstr "Mídia:%s"
-++msgid "No support for INET on this system.\n"
-++msgstr "Este sistema não tem suporte a INET.\n"
-+ 
-+-#: ../ifconfig.c:169
-+-msgid "(auto)"
-+-msgstr "(auto)"
-++#: ../ifconfig.c:193
-++#, fuzzy, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr ""
-++"%s: erro obtendo informações da interface: %s\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:176
-+-#, c-format
-+-msgid "          %s addr:%s "
-+-msgstr "          %s end.: %s "
-++#: ../ifconfig.c:202
-++#, fuzzy, c-format
-++msgid ""
-++"Usage:\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++msgstr ""
-++"Uso:\n"
-++"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <endereço>]\n"
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:204
-+ #, c-format
-+-msgid " P-t-P:%s "
-+-msgstr " P-a-P:%s "
-++msgid "  [add <address>[/<prefixlen>]]\n"
-++msgstr "  [add <endereço>[/<tam_prefixo>]]\n"
-+ 
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:205
-+ #, c-format
-+-msgid " Bcast:%s "
-+-msgstr " Bcast:%s "
-++msgid "  [del <address>[/<prefixlen>]]\n"
-++msgstr "  [del <endereço>[/<tam_prefixo>]]\n"
-+ 
-+-#: ../ifconfig.c:184
-++#: ../ifconfig.c:206
-+ #, c-format
-+-msgid " Mask:%s\n"
-+-msgstr " Masc:%s\n"
-++msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-++msgstr "  [[-]broadcast [<endereço>]]  [[-]pointopoint [<endereço>]]\n"
-+ 
-+-#: ../ifconfig.c:201
-++#: ../ifconfig.c:207
-+ #, c-format
-+-msgid "          inet6 addr: %s/%d"
-+-msgstr "          endereço inet6: %s/%d"
-+-
-+-#: ../ifconfig.c:203
-+-msgid " Scope:"
-+-msgstr " Escopo:"
-+-
-+-#: ../ifconfig.c:206
-+-msgid "Global"
-+-msgstr "Global"
-++msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-++msgstr "  [netmask <endereço>]  [dstaddr <endereço>]  [tunnel <endereço>]\n"
-+ 
-+-#: ../ifconfig.c:209
-+-msgid "Link"
-+-msgstr "Link"
-++#: ../ifconfig.c:210
-++#, c-format
-++msgid "  [outfill <NN>] [keepalive <NN>]\n"
-++msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+ 
-+ #: ../ifconfig.c:212
-+-msgid "Site"
-+-msgstr "Site"
-+-
-+-#: ../ifconfig.c:215
-+-msgid "Compat"
-+-msgstr "Compat"
-+-
-+-#: ../ifconfig.c:218
-+-msgid "Host"
-+-msgstr "Máquina"
-+-
-+-#: ../ifconfig.c:221
-+-msgid "Unknown"
-+-msgstr "Desconhecido"
-+-
-+-#: ../ifconfig.c:236
-+ #, c-format
-+-msgid "          IPX/Ethernet II addr:%s\n"
-+-msgstr "      Endereço IPX/Ethernet II:%s\n"
-++msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-++msgstr "  [hw <HW> <endereço>]  [metric <NN>]  [mtu <NN>]\n"
-+ 
-+-#: ../ifconfig.c:239
-++#: ../ifconfig.c:213
-+ #, c-format
-+-msgid "          IPX/Ethernet SNAP addr:%s\n"
-+-msgstr "      Endereço IPX/Ethernet SNAP:%s\n"
-++msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ 
-+-#: ../ifconfig.c:242
-++#: ../ifconfig.c:214
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+-msgstr "      Endereço IPX/Ethernet 802.2:%s\n"
-++msgid "  [multicast]  [[-]promisc]\n"
-++msgstr "  [multicast]  [[-]promisc]\n"
-+ 
-+-#: ../ifconfig.c:245
-++#: ../ifconfig.c:215
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+-msgstr "      Endereço IPX/Ethernet 802.3:%s\n"
-++msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-++msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tipo>]\n"
-+ 
-+-#: ../ifconfig.c:255
-++#: ../ifconfig.c:217
-+ #, c-format
-+-msgid "          EtherTalk Phase 2 addr:%s\n"
-+-msgstr "          Endereço EtherTalk fase 2:%s\n"
-++msgid "  [txqueuelen <NN>]\n"
-++msgstr "  [txqueuelen <NN>]\n"
-+ 
-+-#: ../ifconfig.c:264
-++#: ../ifconfig.c:220
-+ #, c-format
-+-msgid "          econet addr:%s\n"
-+-msgstr "          Endereço econet:%s\n"
-+-
-+-#: ../ifconfig.c:270
-+-msgid "[NO FLAGS] "
-+-msgstr "[NENHUMA FLAG] "
-+-
-+-#: ../ifconfig.c:272
-+-msgid "UP "
-+-msgstr "UP "
-+-
-+-#: ../ifconfig.c:274
-+-msgid "BROADCAST "
-+-msgstr "BROADCAST"
-+-
-+-#: ../ifconfig.c:276
-+-msgid "DEBUG "
-+-msgstr "DEBUG "
-+-
-+-#: ../ifconfig.c:278
-+-msgid "LOOPBACK "
-+-msgstr "LOOPBACK"
-+-
-+-#: ../ifconfig.c:280
-+-msgid "POINTOPOINT "
-+-msgstr "POINTOPOINT "
-+-
-+-#: ../ifconfig.c:282
-+-msgid "NOTRAILERS "
-+-msgstr "NOTRAILERS "
-+-
-+-#: ../ifconfig.c:284
-+-msgid "RUNNING "
-+-msgstr "RUNNING "
-++msgid "  [[-]dynamic]\n"
-++msgstr "  [[-]dynamic]\n"
-+ 
-+-#: ../ifconfig.c:286
-+-msgid "NOARP "
-+-msgstr "NOARP "
-++#: ../ifconfig.c:222
-++#, c-format
-++msgid ""
-++"  [up|down] ...\n"
-++"\n"
-++msgstr ""
-++"  [up|down] ...\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:288
-+-msgid "PROMISC "
-+-msgstr "PROMISC "
-++#: ../ifconfig.c:224
-++#, c-format
-++msgid "  <HW>=Hardware Type.\n"
-++msgstr "  <HW>=Tipo de Hardware.\n"
-+ 
-+-#: ../ifconfig.c:290
-+-msgid "ALLMULTI "
-+-msgstr "ALLMULTI "
-++#: ../ifconfig.c:225
-++#, c-format
-++msgid "  List of possible hardware types:\n"
-++msgstr "  Lista dos tipos possíveis de hardware:\n"
-+ 
-+-#: ../ifconfig.c:292
-+-msgid "SLAVE "
-+-msgstr "SLAVE "
-++#. 1 = ARPable
-++#: ../ifconfig.c:227
-++#, c-format
-++msgid "  <AF>=Address family. Default: %s\n"
-++msgstr "  <AF>=Família de endereços. Default: %s\n"
-+ 
-+-#: ../ifconfig.c:294
-+-msgid "MASTER "
-+-msgstr "MASTER "
-++#: ../ifconfig.c:228
-++#, c-format
-++msgid "  List of possible address families:\n"
-++msgstr "  Lista de famílias de endereços possíveis:\n"
-+ 
-+-#: ../ifconfig.c:296
-+-msgid "MULTICAST "
-+-msgstr "MULTICAST "
-++#: ../ifconfig.c:303
-++#, c-format
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:299
-+-msgid "DYNAMIC "
-+-msgstr "DYNAMIC "
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:302
-++#: ../ifconfig.c:380
-+ #, c-format
-+-msgid " MTU:%d  Metric:%d"
-+-msgstr " MTU:%d  Métrica:%d"
-++msgid "Unknown media type.\n"
-++msgstr "Tipo desconhecido de mídia.\n"
-+ 
-+-#: ../ifconfig.c:306
-++#: ../ifconfig.c:417
-+ #, c-format
-+-msgid "  Outfill:%d  Keepalive:%d"
-+-msgstr "  Outfill:%d  Keepalive:%d"
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:320
-++#: ../ifconfig.c:429
-+ #, c-format
-+-msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+-msgstr "Pacotes RX:%lu erros:%lu descartados:%lu sobreposições:%lu frame:%lu\n"
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:325
-++#: ../ifconfig.c:441
-+ #, c-format
-+-msgid "             compressed:%lu\n"
-+-msgstr "             compactados:%lu\n"
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:329
-++#: ../ifconfig.c:465
-+ #, c-format
-+-msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-+ msgstr ""
-+-"Pacotes TX:%lu erros:%lu descartados:%lu sobreposições:%lu portadora:%lu\n"
-+ 
-+-#: ../ifconfig.c:333
-++#: ../ifconfig.c:523
-+ #, c-format
-+-msgid "          collisions:%lu "
-+-msgstr "          colisões:%lu "
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:335
-++#: ../ifconfig.c:652
-+ #, c-format
-+-msgid "compressed:%lu "
-+-msgstr "compactados:%lu "
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:337
-++#: ../ifconfig.c:684
-+ #, c-format
-+-msgid "txqueuelen:%d "
-+-msgstr "txqueuelen:%d "
-+-
-+-#: ../ifconfig.c:345
-+-#, c-format
-+-msgid "Interrupt:%d "
-+-msgstr "IRQ:%d "
-+-
-+-#. Only print devices using it for
-+-#. I/O maps
-+-#: ../ifconfig.c:348
-+-#, c-format
-+-msgid "Base address:0x%x "
-+-msgstr "Endereço de E/S:0x%x "
-++msgid "hw address type `%s' has no handler to set address. failed.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:350
-++#: ../ifconfig.c:693
-+ #, c-format
-+-msgid "Memory:%lx-%lx "
-+-msgstr "Memória:%lx-%lx "
-++msgid "%s: invalid %s address.\n"
-++msgstr "%s: endereço %s inválido.\n"
-+ 
-+-#: ../ifconfig.c:353
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+ #, c-format
-+-msgid "DMA chan:%x "
-+-msgstr "Canal DMA:%x "
-++msgid "No support for INET6 on this system.\n"
-++msgstr "Este sistema não tem suporte a INET6.\n"
-+ 
-+-#: ../ifconfig.c:384 ../ifconfig.c:405
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-+ #, c-format
-+-msgid "%s: unknown interface: %s\n"
-+-msgstr "%s: interface desconhecida: %s\n"
-+-
-+-#: ../ifconfig.c:421
-+-msgid ""
-+-"Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
-+-msgstr ""
-+-"Uso:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <endereço>]\n"
-+-
-+-#: ../ifconfig.c:425
-+-msgid "  [add <address>[/<prefixlen>]]\n"
-+-msgstr "  [add <endereço>[/<tam_prefixo>]]\n"
-+-
-+-#: ../ifconfig.c:427
-+-msgid "  [del <address>[/<prefixlen>]]\n"
-+-msgstr "  [del <endereço>[/<tam_prefixo>]]\n"
-+-
-+-#: ../ifconfig.c:432
-+-msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+-msgstr "  [[-]broadcast [<endereço>]]  [[-]pointopoint [<endereço>]]\n"
-+-
-+-#: ../ifconfig.c:433
-+-msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+-msgstr "  [netmask <endereço>]  [dstaddr <endereço>]  [tunnel <endereço>]\n"
-+-
-+-#: ../ifconfig.c:436
-+-msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+-msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+-
-+-#: ../ifconfig.c:438
-+-msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+-msgstr "  [hw <HW> <endereço>]  [metric <NN>]  [mtu <NN>]\n"
-+-
-+-#: ../ifconfig.c:439
-+-msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-
-+-#: ../ifconfig.c:440
-+-msgid "  [multicast]  [[-]promisc]\n"
-+-msgstr "  [multicast]  [[-]promisc]\n"
-+-
-+-#: ../ifconfig.c:441
-+-msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+-msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tipo>]\n"
-+-
-+-#: ../ifconfig.c:443
-+-msgid "  [txqueuelen <NN>]\n"
-+-msgstr "  [txqueuelen <NN>]\n"
-+-
-+-#: ../ifconfig.c:446
-+-msgid "  [[-]dynamic]\n"
-+-msgstr "  [[-]dynamic]\n"
-+-
-+-#: ../ifconfig.c:448
-+-msgid ""
-+-"  [up|down] ...\n"
-+-"\n"
-++msgid "Interface %s not initialized\n"
-+ msgstr ""
-+-"  [up|down] ...\n"
-+-"\n"
-+-
-+-#: ../ifconfig.c:450
-+-msgid "  <HW>=Hardware Type.\n"
-+-msgstr "  <HW>=Tipo de Hardware.\n"
-+-
-+-#: ../ifconfig.c:451
-+-msgid "  List of possible hardware types:\n"
-+-msgstr "  Lista dos tipos possíveis de hardware:\n"
-+-
-+-#. 1 = ARPable
-+-#: ../ifconfig.c:453
-+-#, c-format
-+-msgid "  <AF>=Address family. Default: %s\n"
-+-msgstr "  <AF>=Família de endereços. Default: %s\n"
-+-
-+-#: ../ifconfig.c:454
-+-msgid "  List of possible address families:\n"
-+-msgstr "  Lista de famílias de endereços possíveis:\n"
-+-
-+-#: ../ifconfig.c:593
-+-msgid "Unknown media type.\n"
-+-msgstr "Tipo desconhecido de mídia.\n"
-+ 
-+-#: ../ifconfig.c:881
-+-#, c-format
-+-msgid "%s: invalid %s address.\n"
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, fuzzy, c-format
-++msgid "Bad address.\n"
-+ msgstr "%s: endereço %s inválido.\n"
-+ 
-+-#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
-+-msgid "No support for INET6 on this system.\n"
-+-msgstr "Este sistema não tem suporte a INET6.\n"
-+-
-+-#: ../ifconfig.c:983
-++#: ../ifconfig.c:885
-++#, c-format
-+ msgid "Address deletion not supported on this system.\n"
-+ msgstr "Remoção de endereço não suportada neste sistema.\n"
-+ 
-+-#: ../ifconfig.c:1066
-+-msgid "No support for INET on this system.\n"
-+-msgstr "Este sistema não tem suporte a INET.\n"
-++#: ../ifconfig.c:957
-++#, fuzzy, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "Não sei como configurar endereços para a família %d.\n"
-+ 
-+-#: ../ifconfig.c:1076
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr "Este sistema não tem suporte a ECONET.\n"
-+ 
-+-#: ../ifconfig.c:1084
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr "Não sei como configurar endereços para a família %d.\n"
-+ 
-+-#: ../netstat.c:383
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+-msgstr ""
-+-"(Não foi possível ler informações para \"-p\": geteuid()=%d mas você deve "
-+-"ser root.)\n"
-++msgstr "(Não foi possível ler informações para \"-p\": geteuid()=%d mas você deve ser root.)\n"
-+ 
-+-#: ../netstat.c:387
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+ msgstr ""
-+-"(Nem todos os processos puderam ser identificados, informações sobre "
-+-"processos\n"
-++"(Nem todos os processos puderam ser identificados, informações sobre processos\n"
-+ " de outrem não serão mostrados, você deve ser root para vê-los todos.)\n"
-+ 
-+-#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr "OUVINDO"
-+ 
-+-#: ../netstat.c:395
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr "CONN ENVIADO"
-+ 
-+-#: ../netstat.c:396 ../netstat.c:1168
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr "DISC ENVIADO"
-+ 
-+-#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr "ESTABELECIDA"
-+ 
-+-#: ../netstat.c:419
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr "Ative sockets NET/ROM\n"
-+ 
-+-#: ../netstat.c:420
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-+-msgstr ""
-+-"Usuário    Destino    Origem  Dispositivo Estado      Vr/Vs  Send-Q  Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-++msgstr "Usuário    Destino    Origem  Dispositivo Estado      Vr/Vs  Send-Q  Recv-Q\n"
-+ 
-+-#: ../netstat.c:430 ../netstat.c:1208
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr "Problemas lendo dados de %s\n"
-+ 
-+-#: ../netstat.c:465
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr "SYN_ENVIADO"
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr "SYN_RECEBIDO"
-+ 
-+-#: ../netstat.c:467
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr "ESPERA_FIN1"
-+ 
-+-#: ../netstat.c:468
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr "ESPERA_FIN2"
-+ 
-+-#: ../netstat.c:469
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr "TIME_WAIT"
-+ 
-+-#: ../netstat.c:470
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr "FECHAR"
-+ 
-+-#: ../netstat.c:471
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr "ESPERANDO_FECHAR"
-+ 
-+-#: ../netstat.c:472
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr "ÚLTIMO_ACK"
-+ 
-+-#: ../netstat.c:473
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr "OUÇA"
-+ 
-+-#: ../netstat.c:474
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr "FECHANDO"
-+ 
-+-#: ../netstat.c:544
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr "atenção, recebi linha igmp6 inválida %d.\n"
-+ 
-+-#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
-+-#: ../netstat.c:935 ../netstat.c:940
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr "netstat: família de protocolos %d não suportada!\n"
-+ 
-+-#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr "atenção, recebi linha igmp inválida %d.\n"
-+ 
-+-#: ../netstat.c:666
-++#: ../netstat.c:677
-++#, fuzzy, c-format
-++msgid "Active X.25 sockets\n"
-++msgstr "Ativar sockets AX.25\n"
-++
-++#. IMHO, Vr/Vs is not very usefull --SF
-++#: ../netstat.c:679
-++#, fuzzy, c-format
-++msgid ""
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-++msgstr "Destino    Origem Dispositivo Estado       Vr/Vs  Send-Q  Recv-Q\n"
-++
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr "atenção, recebi linha tcp inválida.\n"
-+ 
-+-#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr "desligado (0.00/%ld/%ld)"
-+ 
-+-#: ../netstat.c:708
-++#: ../netstat.c:804
-+ #, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr "em (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:713
-++#: ../netstat.c:809
-+ #, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr "keepalive (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:718
-++#: ../netstat.c:814
-+ #, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr "timewait (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr "desconh.-%d (%2.2f/%ld)"
-+ 
-+-#: ../netstat.c:799
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr "atenção, recebi linha udp inválida.\n"
-+ 
-+-#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr "DESCONHECIDA"
-+ 
-+-#: ../netstat.c:860 ../netstat.c:980
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr "ligado %d (%2.2f/%ld)"
-+ 
-+-#: ../netstat.c:949
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr "atenção, recebi linha raw inválida.\n"
-+ 
-+-#: ../netstat.c:1028
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr "atenção, recebi linha unix inválida.\n"
-+ 
-+-#: ../netstat.c:1055
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr "STREAM"
-+ 
-+-#: ../netstat.c:1059
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr "DGRAM"
-+ 
-+-#: ../netstat.c:1063
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr "RAW"
-+ 
-+-#: ../netstat.c:1067
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr "RDM"
-+ 
-+-#: ../netstat.c:1071
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+ msgstr "SEQPACKET"
-+ 
-+-#: ../netstat.c:1080
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr "LIVRE"
-+ 
-+-#: ../netstat.c:1096
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr "CONECTANDO"
-+ 
-+-#: ../netstat.c:1100
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr "CONECTADO"
-+ 
-+-#: ../netstat.c:1104
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr "DESCONECTANDO"
-+ 
-+-#: ../netstat.c:1135
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+ msgstr "Domain sockets UNIX ativos "
-+ 
-+-#: ../netstat.c:1137 ../netstat.c:1666
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr "(servidores e estabelecidas)"
-+ 
-+-#: ../netstat.c:1140 ../netstat.c:1669
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr "(sem os servidores)"
-+ 
-+-#: ../netstat.c:1142 ../netstat.c:1671
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr "(sem os servidores)"
-+ 
-+-#: ../netstat.c:1145
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+@@ -993,114 +919,118 @@ msgstr ""
-+ "\n"
-+ "Proto CntRef Flags       Tipo       Estado        I-Node Rota"
-+ 
-+-#: ../netstat.c:1147
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr " Caminho\n"
-+ 
-+-#: ../netstat.c:1167
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr "SABM ENVIADO"
-+ 
-+-#: ../netstat.c:1170
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr "RECUPERAÇÃO"
-+ 
-+-#: ../netstat.c:1184
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr "Ativar sockets AX.25\n"
-+ 
-+-#: ../netstat.c:1185
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr "Destino    Origem Dispositivo Estado       Vr/Vs  Send-Q  Recv-Q\n"
-+ 
-+-#: ../netstat.c:1228
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr "problemas lendo dados de %s\n"
-+ 
-+-#: ../netstat.c:1279
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+ "State"
-+ msgstr ""
-+ "Sockets IPX ativos\n"
-+-"Proto Recv-Q Send-Q Endereço Local             Endereço Remoto           "
-+-"Estado"
-++"Proto Recv-Q Send-Q Endereço Local             Endereço Remoto           Estado"
-+ 
-+-#: ../netstat.c:1281
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr " Usuário"
-+ 
-+-#: ../netstat.c:1315
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr "ESTAB"
-+ 
-+-#: ../netstat.c:1323
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr "DESC."
-+ 
-+-#: ../netstat.c:1367
-+-msgid "     - no statistics available -"
-+-msgstr "     - estatísticas não disponíveis -"
-+-
-+-#: ../netstat.c:1370
-+-msgid "[NO FLAGS]"
-+-msgstr "[SEM FLAGS]"
-+-
-+-#: ../netstat.c:1400
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+ msgstr "Tabela de Interfaces do Kernel\n"
-+ 
-+-#: ../netstat.c:1401
-++#: ../netstat.c:1465
-++#, fuzzy, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+-msgstr ""
-+-"Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV "
-+-"Opções\n"
-++msgstr "Iface     MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OV Opções\n"
-+ 
-+-#: ../netstat.c:1404
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+ msgstr "falta informação da interface"
-+ 
-+-#: ../netstat.c:1425
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+ "uso: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--help}\n"
-+ 
-+-#: ../netstat.c:1426
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr "     netstat [-vnNcaeo] [<Socket>]\n"
-+ 
-+-#: ../netstat.c:1427
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ msgstr "     netstat [-vnNcaeo] [<Socket>]\n"
-+ 
-+-#: ../netstat.c:1429
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr "        -r, --route             mostra tabela de roteamento\n"
-+ 
-+-#: ../netstat.c:1430
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr "        -i, --interfaces        mostra tabela de interfaces\n"
-+ 
-+-#: ../netstat.c:1431
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr ""
-+ "        -o, --timers            mostra temporizadores\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1432
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+ msgstr "        -i, --interfaces        mostra tabela de interfaces\n"
-+ 
-+-#: ../netstat.c:1434
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+@@ -1108,19 +1038,38 @@ msgstr ""
-+ "        -M, --masquerade        mostra conexões mascaradas\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1438 ../route.c:87
-++#: ../netstat.c:1505
-++#, fuzzy, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-++msgstr "        -n, --numeric           não resolve nomes\n"
-++
-++#: ../netstat.c:1506
-++#, fuzzy, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-++msgstr "        -n, --numeric           não resolve nomes\n"
-++
-++#: ../netstat.c:1507
-++#, fuzzy, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-++msgstr "        -n, --numeric           não resolve nomes\n"
-++
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr "        -n, --numeric           não resolve nomes\n"
-+ 
-+-#: ../netstat.c:1439 ../route.c:88
-++#: ../netstat.c:1509 ../route.c:88
-++#, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+ msgstr "        -e, --extend             mostra outras/mais informações\n"
-+ 
-+-#: ../netstat.c:1440
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+ msgstr "        -r, --route             mostra tabela de roteamento\n"
-+ 
-+-#: ../netstat.c:1441
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+@@ -1128,30 +1077,33 @@ msgstr ""
-+ "        -c, --continuous        listagem contínua\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1442
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+ msgstr "        -L, --netlink           mostra mensagens netlink do kernel\n"
-+ 
-+-#: ../netstat.c:1443
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+ msgstr "        -a, --all, --listening  mostra tudo\n"
-+ 
-+-#: ../netstat.c:1444
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr ""
-+ "        -o, --timers            mostra temporizadores\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1445 ../route.c:89
-++#: ../netstat.c:1515 ../route.c:89
-++#, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+-msgstr ""
-+-"        -F, --fib             mostra a Base de Informações de Repasse "
-+-"(default)\n"
-++msgstr "        -F, --fib             mostra a Base de Informações de Repasse (default)\n"
-+ 
-+-#: ../netstat.c:1446 ../route.c:90
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+@@ -1159,136 +1111,145 @@ msgstr ""
-+ "        -C, --cache              mostra cache de roteamento no lugar da FIB\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1448
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ 
-+-#: ../netstat.c:1449 ../route.c:92
-+-#, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-++#: ../netstat.c:1519
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr "  <AF>=Use '-A <af>' ou [--<af>' Default: %s\n"
-+ 
-+-#: ../netstat.c:1450 ../route.c:93
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+-msgstr ""
-+-"  Lista das famílias de endereços possíveis (que suportam roteamento):\n"
-++msgstr "  Lista das famílias de endereços possíveis (que suportam roteamento):\n"
-+ 
-+-#: ../netstat.c:1663
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr "Conexões Internet Ativas "
-+ 
-+-#: ../netstat.c:1673
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Endereço Local          Endereço Remoto         Estado   "
-+-"  "
-++"Proto Recv-Q Send-Q Endereço Local          Endereço Remoto         Estado     "
-+ 
-+-#: ../netstat.c:1675
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr " Usuário   "
-+ 
-+-#: ../netstat.c:1678
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr " Temporizador"
-+ 
-+-#: ../netstat.c:1708
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+ msgstr "IPv4 Group Memberships\n"
-+ 
-+-#: ../netstat.c:1709
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr "Interface       CntRef Grupo\n"
-+ 
-+-#: ../rarp.c:43
-++#: ../rarp.c:44
-+ msgid "This kernel does not support RARP.\n"
-+ msgstr "Este kernel não tem suporte a RARP.\n"
-+ 
-+-#: ../rarp.c:82
-++#: ../rarp.c:83
-+ #, c-format
-+ msgid "no RARP entry for %s.\n"
-+ msgstr "Sem entrada RARP para %s.\n"
-+ 
-+-#: ../rarp.c:95
-++#: ../rarp.c:96
-+ #, c-format
-+ msgid "%s: bad hardware address\n"
-+ msgstr "%s: endereço de hardware inválido\n"
-+ 
-+-#: ../rarp.c:127
-++#: ../rarp.c:128
-+ #, c-format
-+ msgid "rarp: cannot open file %s:%s.\n"
-+ msgstr "rarp: não foi possível abrir o arquivo %s:%s.\n"
-+ 
-+-#: ../rarp.c:139
-++#: ../rarp.c:140
-+ #, c-format
-+ msgid "rarp: format error at %s:%u\n"
-+ msgstr "rarp: erro de formato em %s:%u\n"
-+ 
-+-#: ../rarp.c:143 ../rarp.c:287
-++#: ../rarp.c:144 ../rarp.c:289
-+ #, c-format
-+ msgid "rarp: %s: unknown host\n"
-+ msgstr "rarp: %s: máquina desconhecida\n"
-+ 
-+-#: ../rarp.c:146
-++#: ../rarp.c:147
-+ #, c-format
-+ msgid "rarp: cannot set entry from %s:%u\n"
-+ msgstr "rarp: não é possível incluir uma entrada para %s:%u\n"
-+ 
-+-#: ../rarp.c:175
-++#: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+ msgstr ""
-+ "Uso: rarp -a                                   lista entradas no cache\n"
-+ 
-+-#: ../rarp.c:176
-++#: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+-msgstr ""
-+-"     rarp -d máquina                           remove entrada do cache\n"
-++msgstr "     rarp -d máquina                           remove entrada do cache\n"
-+ 
-+-#: ../rarp.c:177
-++#: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+-msgstr ""
-+-"     rarp [-t tipo-hw] -s máquina endereço-hw  adiciona entrada ao cache\n"
-++msgstr "     rarp [-t tipo-hw] -s máquina endereço-hw  adiciona entrada ao cache\n"
-+ 
-+-#: ../rarp.c:178
-++#: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+ msgstr ""
-+ "       rarp -f                               adiciona entradas a partir do\n"
-+ "                                             arquivo ethers.\n"
-+ 
-+-#: ../rarp.c:179
-++#: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+-msgstr ""
-+-"     rarp -V                                   mostra versão do programa\n"
-++msgstr "     rarp -V                                   mostra versão do programa\n"
-+ 
-+-#: ../rarp.c:236
-++#: ../rarp.c:238
-+ #, c-format
-+ msgid "%s: illegal option mix.\n"
-+ msgstr "%s: mistura ilegal de opções.\n"
-+ 
-+-#: ../rarp.c:267
-++#: ../rarp.c:269
-+ #, c-format
-+ msgid "rarp: %s: unknown hardware type.\n"
-+ msgstr "rarp: %s: tipo desconhecido de hardware.\n"
-+ 
-+-#: ../route.c:79
-++#: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+-"Uso: route [-nNvee] [-FC] [famílias_de_endereços]  Lista as tabelas de "
-+-"rotea-\n"
-++"Uso: route [-nNvee] [-FC] [famílias_de_endereços]  Lista as tabelas de rotea-\n"
-+ "                                                   mento do kernel\n"
-+ 
-+-#: ../route.c:80
-++#: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+@@ -1298,35 +1259,42 @@ msgstr ""
-+ "                                                   mento da família.\n"
-+ "\n"
-+ 
-+-#: ../route.c:82
-++#: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+ msgstr ""
-+-"       route {-h|--help} [família_de_endereços]    Sintaxe para a AF "
-+-"(Família\n"
-+-"                                                   de endereços) "
-+-"espeficicada.\n"
-++"       route {-h|--help} [família_de_endereços]    Sintaxe para a AF (Família\n"
-++"                                                   de endereços) espeficicada.\n"
-+ 
-+-#: ../route.c:83
-++#: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+ "\n"
-+ msgstr ""
-+-"       route {-V|--version}                        Mostra a versão do "
-+-"comando\n"
-++"       route {-V|--version}                        Mostra a versão do comando\n"
-+ "                                                   e sai.\n"
-+ 
-++#: ../route.c:92
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>=Use '-A <af>' ou [--<af>' Default: %s\n"
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr "Uso: ifconfig [-a] [-i] [-v] interface\n"
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr "                [[família] endereço]\n"
-+ 
-+ #: ../plipconfig.c:68
-++#, c-format
-+ msgid "       plipconfig -V | --version\n"
-+ msgstr "       plipconfig -V | --version\n"
-+ 
-+@@ -1335,25 +1303,29 @@ msgstr "       plipconfig -V | --version
-+ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr "%s\tnibble %lu  trigger %lu\n"
-+ 
-+-#: ../iptunnel.c:79
-++#: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr "Uso: iptunnel { add | change | del | show } [ NOME ]\n"
-+ 
-+-#: ../iptunnel.c:80
-++#: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+-msgstr ""
-+-"          [ mode { ipip | gre | sit } ] [ remote END ] [ local END ]\n"
-++msgstr "          [ mode { ipip | gre | sit } ] [ remote END ] [ local END ]\n"
-+ 
-+-#: ../iptunnel.c:81
-++#: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ 
-+-#: ../iptunnel.c:82
-++#: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+ msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev DISP_FÍSICO ]\n"
-+ 
-+-#: ../iptunnel.c:83
-++#: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+@@ -1361,451 +1333,734 @@ msgstr ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+ 
-+-#: ../iptunnel.c:84
-++#: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr "Onde: NAME := STRING\n"
-+ 
-+-#: ../iptunnel.c:85
-++#: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr "       END := { ENDEREÇO_IP | any }\n"
-+ 
-+-#: ../iptunnel.c:86
-++#: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr "       TOS  := { NÚMERO | inherit }\n"
-+ 
-+-#: ../iptunnel.c:87
-++#: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr "       TTL  := { 1..255 | inherit }\n"
-+ 
-+-#: ../iptunnel.c:88
-++#: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr "       KEY  := { QUATRO_NÚMEROS_SEPARADOS_POR_PONTOS | NÚMERO }\n"
-+ 
-+-#: ../iptunnel.c:326
-++#: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr "Chaves não são permitidas com ipip e sit.\n"
-+ 
-+-#: ../iptunnel.c:346
-++#: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr "Um túnel de broadcast precisa de um endereço de origem.\n"
-+ 
-+-#: ../iptunnel.c:361
-++#: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr "ttl != 0 e noptmudisc são incompatíveis\n"
-+ 
-+-#: ../iptunnel.c:373
-++#: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr "não foi possível determinar o modo do túnel (ip, gre ou sit)\n"
-+ 
-+-#: ../iptunnel.c:411
-++#: ../iptunnel.c:417
-+ #, c-format
-+ msgid "%s: %s/ip  remote %s  local %s "
-+ msgstr "%s: %s/ip  remoto %s  local %s "
-+ 
-+-#: ../iptunnel.c:415
-++#: ../iptunnel.c:421
-+ msgid "unknown"
-+ msgstr "Desconhecido"
-+ 
-+-#: ../iptunnel.c:447
-++#: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr "  Descarte pacotes fora de seqüência.\n"
-+ 
-+-#: ../iptunnel.c:449
-++#: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr "  É necessário checksum nos pacotes recebidos.\n"
-+ 
-+-#: ../iptunnel.c:451
-++#: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr "  Seqüencie pacotes na saída.\n"
-+ 
-+-#: ../iptunnel.c:453
-++#: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr "  Calcule o checksum para pacotes de saída.\n"
-+ 
-+-#: ../iptunnel.c:481
-++#: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+ msgstr "Formato errado de /proc/net/dev. Desculpe.\n"
-+ 
-+-#: ../iptunnel.c:494
-++#: ../iptunnel.c:500
-+ #, c-format
-+ msgid "Failed to get type of [%s]\n"
-+ msgstr "Não foi possível obter o tipo de [%s]\n"
-+ 
-+-#: ../iptunnel.c:510
-++#: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr "RX: Pacotes    Bytes        Erros  CsunErrs ForaSeq  Mcasts\n"
-+ 
-+-#: ../iptunnel.c:513
-++#: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr "TX: Pacotes    Bytes        Erros  DeadLoop SemRota  SemBufs\n"
-+ 
-+-#: ../statistics.c:45
-++#: ../statistics.c:47
-+ msgid "ICMP input histogram:"
-+ msgstr "Histograma de entrada ICMP:"
-+ 
-+-#: ../statistics.c:46
-++#: ../statistics.c:48
-+ msgid "ICMP output histogram:"
-+ msgstr "Histograma de saída ICMP"
-+ 
-+-#: ../statistics.c:63
-++#: ../statistics.c:65
-+ #, c-format
-+ msgid "Forwarding is %s"
-+ msgstr "Repassagem está %s"
-+ 
-+-#: ../statistics.c:64
-+-#, c-format
-+-msgid "Default TTL is %d"
-++#: ../statistics.c:66
-++#, fuzzy, c-format
-++msgid "Default TTL is %u"
-+ msgstr "Default TTL é %d"
-+ 
-+-#: ../statistics.c:65
-+-#, c-format
-+-msgid "%d total packets received"
-++#: ../statistics.c:67
-++#, fuzzy, c-format
-++msgid "%u total packets received"
-+ msgstr "%d total de pacotes recebidos"
-+ 
-+-#: ../statistics.c:66
-+-#, c-format
-+-msgid "%d with invalid headers"
-++#: ../statistics.c:68
-++#, fuzzy, c-format
-++msgid "%u with invalid headers"
-+ msgstr "%d com cabeçalhos inválidos"
-+ 
-+-#: ../statistics.c:67
-+-#, c-format
-+-msgid "%d with invalid addresses"
-++#: ../statistics.c:69
-++#, fuzzy, c-format
-++msgid "%u with invalid addresses"
-+ msgstr "%d com endereços inválidos"
-+ 
-+-#: ../statistics.c:68
-+-#, c-format
-+-msgid "%d forwarded"
-++#: ../statistics.c:70
-++#, fuzzy, c-format
-++msgid "%u forwarded"
-+ msgstr "%d repassados"
-+ 
-+-#: ../statistics.c:69
-+-#, c-format
-+-msgid "%d with unknown protocol"
-++#: ../statistics.c:71
-++#, fuzzy, c-format
-++msgid "%u with unknown protocol"
-+ msgstr "%d com protocolo desconhecido"
-+ 
-+-#: ../statistics.c:70
-+-#, c-format
-+-msgid "%d incoming packets discarded"
-++#: ../statistics.c:72
-++#, fuzzy, c-format
-++msgid "%u incoming packets discarded"
-+ msgstr "%d pacotes entrantes descartados"
-+ 
-+-#: ../statistics.c:71
-+-#, c-format
-+-msgid "%d incoming packets delivered"
-++#: ../statistics.c:73
-++#, fuzzy, c-format
-++msgid "%u incoming packets delivered"
-+ msgstr "%d pacotes entrantes despachados"
-+ 
-+-#: ../statistics.c:72
-+-#, c-format
-+-msgid "%d requests sent out"
-++#: ../statistics.c:74
-++#, fuzzy, c-format
-++msgid "%u requests sent out"
-+ msgstr "%d requisições enviadas"
-+ 
-+ #. ?
-+-#: ../statistics.c:73
-+-#, c-format
-+-msgid "%d outgoing packets dropped"
-++#: ../statistics.c:75
-++#, fuzzy, c-format
-++msgid "%u outgoing packets dropped"
-+ msgstr "%d pacotes saintes descartados"
-+ 
-+-#: ../statistics.c:74
-+-#, c-format
-+-msgid "%d dropped because of missing route"
-++#: ../statistics.c:76
-++#, fuzzy, c-format
-++msgid "%u dropped because of missing route"
-+ msgstr "%d descartados devido a falta de rota"
-+ 
-+-#: ../statistics.c:75
-+-#, c-format
-+-msgid "%d fragments dropped after timeout"
-++#: ../statistics.c:77
-++#, fuzzy, c-format
-++msgid "%u fragments dropped after timeout"
-+ msgstr "%d fragmentos descartados após estouro de tempo"
-+ 
-+-#: ../statistics.c:76
-+-#, c-format
-+-msgid "%d reassemblies required"
-++#: ../statistics.c:78
-++#, fuzzy, c-format
-++msgid "%u reassemblies required"
-+ msgstr "%d remontagens requeridas"
-+ 
-+ #. ?
-+-#: ../statistics.c:77
-+-#, c-format
-+-msgid "%d packets reassembled ok"
-++#: ../statistics.c:79
-++#, fuzzy, c-format
-++msgid "%u packets reassembled ok"
-+ msgstr "%d pacotes remontados sem problemas"
-+ 
-+-#: ../statistics.c:78
-+-#, c-format
-+-msgid "%d packet reassembles failed"
-++#: ../statistics.c:80
-++#, fuzzy, c-format
-++msgid "%u packet reassembles failed"
-+ msgstr "%d remontagens de pacotes falharam"
-+ 
-+-#: ../statistics.c:79
-+-#, c-format
-+-msgid "%d fragments received ok"
-++#: ../statistics.c:81
-++#, fuzzy, c-format
-++msgid "%u fragments received ok"
-+ msgstr "%d fragmentos recebidos sem problemas"
-+ 
-+-#: ../statistics.c:80
-+-#, c-format
-+-msgid "%d fragments failed"
-++#: ../statistics.c:82
-++#, fuzzy, c-format
-++msgid "%u fragments failed"
-+ msgstr "%d fragmentos falharam"
-+ 
-+-#: ../statistics.c:81
-+-#, c-format
-+-msgid "%d fragments created"
-++#: ../statistics.c:83
-++#, fuzzy, c-format
-++msgid "%u fragments created"
-+ msgstr "%d fragmentos criados"
-+ 
-+-#: ../statistics.c:86
-+-#, c-format
-+-msgid "%d ICMP messages received"
-++#: ../statistics.c:88
-++#, fuzzy, c-format
-++msgid "%u ICMP messages received"
-+ msgstr "%d mensagens ICMP recebidas"
-+ 
-+-#: ../statistics.c:87
-+-#, c-format
-+-msgid "%d input ICMP message failed."
-++#: ../statistics.c:89
-++#, fuzzy, c-format
-++msgid "%u input ICMP message failed."
-+ msgstr "%d mensagens ICMP entrantes falharam."
-+ 
-+-#: ../statistics.c:88 ../statistics.c:101
-+-#, c-format
-+-msgid "destination unreachable: %d"
-++#: ../statistics.c:90 ../statistics.c:103
-++#, fuzzy, c-format
-++msgid "destination unreachable: %u"
-+ msgstr "destino não alcançável: %d"
-+ 
-+-#: ../statistics.c:89
-+-#, c-format
-+-msgid "timeout in transit: %d"
-++#: ../statistics.c:91
-++#, fuzzy, c-format
-++msgid "timeout in transit: %u"
-+ msgstr "estouro de tempo em trânsito: %d"
-+ 
-+-#: ../statistics.c:90 ../statistics.c:103
-+-#, c-format
-+-msgid "wrong parameters: %d"
-++#: ../statistics.c:92 ../statistics.c:105
-++#, fuzzy, c-format
-++msgid "wrong parameters: %u"
-+ msgstr "parâmetros errados: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:91
-+-#, c-format
-+-msgid "source quenchs: %d"
-++#: ../statistics.c:93
-++#, fuzzy, c-format
-++msgid "source quenches: %u"
-+ msgstr "source quenchs: %d"
-+ 
-+-#: ../statistics.c:92
-+-#, c-format
-+-msgid "redirects: %d"
-++#: ../statistics.c:94
-++#, fuzzy, c-format
-++msgid "redirects: %u"
-+ msgstr "redireções: %d"
-+ 
-+-#: ../statistics.c:93
-+-#, c-format
-+-msgid "echo requests: %d"
-++#: ../statistics.c:95
-++#, fuzzy, c-format
-++msgid "echo requests: %u"
-+ msgstr "requisições de eco: %d"
-+ 
-+-#: ../statistics.c:94 ../statistics.c:107
-+-#, c-format
-+-msgid "echo replies: %d"
-++#: ../statistics.c:96 ../statistics.c:109
-++#, fuzzy, c-format
-++msgid "echo replies: %u"
-+ msgstr "respostas de eco: %d"
-+ 
-+-#: ../statistics.c:95
-+-#, c-format
-+-msgid "timestamp request: %d"
-++#: ../statistics.c:97
-++#, fuzzy, c-format
-++msgid "timestamp request: %u"
-+ msgstr "requisições de timestamp: %d"
-+ 
-+-#: ../statistics.c:96
-+-#, c-format
-+-msgid "timestamp reply: %d"
-++#: ../statistics.c:98
-++#, fuzzy, c-format
-++msgid "timestamp reply: %u"
-+ msgstr "respostas a timestamps: %d"
-+ 
-+-#: ../statistics.c:97
-+-#, c-format
-+-msgid "address mask request: %d"
-++#: ../statistics.c:99
-++#, fuzzy, c-format
-++msgid "address mask request: %u"
-+ msgstr "requisições de mascara de endereço: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:98
-+-msgid "address mask replies"
-+-msgstr "resposta a mascara de endereço"
-++#: ../statistics.c:100 ../statistics.c:113
-++#, fuzzy, c-format
-++msgid "address mask replies: %u"
-++msgstr "respostas a máscara de endereço: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:99
-+-#, c-format
-+-msgid "%d ICMP messages sent"
-++#: ../statistics.c:101
-++#, fuzzy, c-format
-++msgid "%u ICMP messages sent"
-+ msgstr "%d mensagens ICMP enviadas"
-+ 
-+-#: ../statistics.c:100
-+-#, c-format
-+-msgid "%d ICMP messages failed"
-++#: ../statistics.c:102
-++#, fuzzy, c-format
-++msgid "%u ICMP messages failed"
-+ msgstr "%d mensagens ICMP falharam"
-+ 
-+-#: ../statistics.c:102
-+-#, c-format
-+-msgid "time exceeded: %d"
-++#: ../statistics.c:104
-++#, fuzzy, c-format
-++msgid "time exceeded: %u"
-+ msgstr "tempo excedido: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:104
-+-#, c-format
-+-msgid "source quench: %d"
-++#: ../statistics.c:106
-++#, fuzzy, c-format
-++msgid "source quench: %u"
-+ msgstr "source quench: %d"
-+ 
-+-#: ../statistics.c:105
-+-#, c-format
-+-msgid "redirect: %d"
-++#: ../statistics.c:107
-++#, fuzzy, c-format
-++msgid "redirect: %u"
-+ msgstr "redireções: %d"
-+ 
-+-#: ../statistics.c:106
-+-#, c-format
-+-msgid "echo request: %d"
-++#: ../statistics.c:108
-++#, fuzzy, c-format
-++msgid "echo request: %u"
-+ msgstr "requisições de eco: %d"
-+ 
-+-#: ../statistics.c:108
-+-#, c-format
-+-msgid "timestamp requests: %d"
-++#: ../statistics.c:110
-++#, fuzzy, c-format
-++msgid "timestamp requests: %u"
-+ msgstr "requisições de timestamp: %d"
-+ 
-+-#: ../statistics.c:109
-+-#, c-format
-+-msgid "timestamp replies: %d"
-++#: ../statistics.c:111
-++#, fuzzy, c-format
-++msgid "timestamp replies: %u"
-+ msgstr "respostas a timestamp: %d"
-+ 
-+-#: ../statistics.c:110
-+-#, c-format
-+-msgid "address mask requests: %d"
-++#: ../statistics.c:112
-++#, fuzzy, c-format
-++msgid "address mask requests: %u"
-+ msgstr "requisições de máscara de endereço: %d"
-+ 
-+-#: ../statistics.c:111
-+-#, c-format
-+-msgid "address mask replies: %d"
-+-msgstr "respostas a máscara de endereço: %d"
-+-
-+-#: ../statistics.c:116
-++#: ../statistics.c:118
-+ #, c-format
-+ msgid "RTO algorithm is %s"
-+ msgstr "Algorítmo RTO é %s"
-+ 
-+-#: ../statistics.c:120
-+-#, c-format
-+-msgid "%d active connections openings"
-++#: ../statistics.c:122
-++#, fuzzy, c-format
-++msgid "%u active connections openings"
-+ msgstr "%d tentativas de conexão falharam"
-+ 
-+-#: ../statistics.c:121
-+-#, c-format
-+-msgid "%d passive connection openings"
-++#: ../statistics.c:123
-++#, fuzzy, c-format
-++msgid "%u passive connection openings"
-+ msgstr "%d opens passivos"
-+ 
-+-#: ../statistics.c:122
-+-#, c-format
-+-msgid "%d failed connection attempts"
-++#: ../statistics.c:124
-++#, fuzzy, c-format
-++msgid "%u failed connection attempts"
-+ msgstr "%d tentativas de conexão falharam"
-+ 
-+-#: ../statistics.c:123
-+-#, c-format
-+-msgid "%d connection resets received"
-++#: ../statistics.c:125
-++#, fuzzy, c-format
-++msgid "%u connection resets received"
-+ msgstr "%d resets de conexão recebidas"
-+ 
-+-#: ../statistics.c:124
-+-#, c-format
-+-msgid "%d connections established"
-++#: ../statistics.c:126
-++#, fuzzy, c-format
-++msgid "%u connections established"
-+ msgstr "%d conexões estabelecidas"
-+ 
-+-#: ../statistics.c:125
-+-#, c-format
-+-msgid "%d segments received"
-++#: ../statistics.c:127
-++#, fuzzy, c-format
-++msgid "%u segments received"
-+ msgstr "%d segmentos recebidos"
-+ 
-+-#: ../statistics.c:126
-+-#, c-format
-+-msgid "%d segments send out"
-++#: ../statistics.c:128
-++#, fuzzy, c-format
-++msgid "%u segments send out"
-+ msgstr "%d segmentos enviados"
-+ 
-+-#: ../statistics.c:127
-+-#, c-format
-+-msgid "%d segments retransmited"
-++#: ../statistics.c:129
-++#, fuzzy, c-format
-++msgid "%u segments retransmited"
-+ msgstr "%d segmentos retransmitidos"
-+ 
-+-#: ../statistics.c:128
-+-#, c-format
-+-msgid "%d bad segments received."
-++#: ../statistics.c:130
-++#, fuzzy, c-format
-++msgid "%u bad segments received."
-+ msgstr "%d segmentos ruins recebidos."
-+ 
-+-#: ../statistics.c:129
-+-#, c-format
-+-msgid "%d resets sent"
-++#: ../statistics.c:131
-++#, fuzzy, c-format
-++msgid "%u resets sent"
-+ msgstr "%d resets enviados"
-+ 
-+-#: ../statistics.c:134
-+-#, c-format
-+-msgid "%d packets received"
-++#: ../statistics.c:136
-++#, fuzzy, c-format
-++msgid "%u packets received"
-+ msgstr "%d pacotes recebidos"
-+ 
-+-#: ../statistics.c:135
-+-#, c-format
-+-msgid "%d packets to unknown port received."
-++#: ../statistics.c:137
-++#, fuzzy, c-format
-++msgid "%u packets to unknown port received."
-+ msgstr "%d pacotes para portas desconhecidas recebidos."
-+ 
-+-#: ../statistics.c:136
-+-#, c-format
-+-msgid "%d packet receive errors"
-++#: ../statistics.c:138
-++#, fuzzy, c-format
-++msgid "%u packet receive errors"
-+ msgstr "%d erros de recepção de pacotes"
-+ 
-+-#: ../statistics.c:137
-+-#, c-format
-+-msgid "%d packets sent"
-++#: ../statistics.c:139
-++#, fuzzy, c-format
-++msgid "%u packets sent"
-+ msgstr "%d pacotes enviados"
-+ 
-+-#: ../statistics.c:142
-++#: ../statistics.c:144
-++#, fuzzy, c-format
-++msgid "%u SYN cookies sent"
-++msgstr "%d pacotes enviados"
-++
-++#: ../statistics.c:145
-++#, fuzzy, c-format
-++msgid "%u SYN cookies received"
-++msgstr "%d pacotes recebidos"
-++
-++#: ../statistics.c:146
-++#, fuzzy, c-format
-++msgid "%u invalid SYN cookies received"
-++msgstr "%d pacotes recebidos"
-++
-++#: ../statistics.c:148
-++#, fuzzy, c-format
-++msgid "%u resets received for embryonic SYN_RECV sockets"
-++msgstr "%d resets recebidos para sockets embriônicos SYN_RECV"
-++
-++#: ../statistics.c:150
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue because of socket buffer overrun"
-++msgstr "%d pacotes retirados da fila de recepção devido a sobreposição de buffers de sockets"
-++
-++#. obsolete: 2.2.0 doesn't do that anymore
-++#: ../statistics.c:153
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue"
-++msgstr "%d pacotes retirados da fila de fora de ordem (out-of-order)"
-++
-++#: ../statistics.c:154
-++#, fuzzy, c-format
-++msgid ""
-++"%u packets dropped from out-of-order queue because of socket buffer overrun"
-++msgstr "%d pacotes descartados da fila de fora de ordem devido a sobreposição de buffers de sockets"
-++
-++#: ../statistics.c:156
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because they were out-of-window"
-++msgstr "%d pacotes ICMP descartados porque estavam fora da janela"
-++
-++#: ../statistics.c:158
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because socket was locked"
-++msgstr "%d pacotes ICMP descartadas porque o socket estava bloqueado"
-++
-++#: ../statistics.c:160
-++#, c-format
-++msgid "%u TCP sockets finished time wait in fast timer"
-++msgstr ""
-++
-++#: ../statistics.c:161
-++#, c-format
-++msgid "%u time wait sockets recycled by time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:162
-++#, c-format
-++msgid "%u TCP sockets finished time wait in slow timer"
-++msgstr ""
-++
-++#: ../statistics.c:163
-++#, c-format
-++msgid "%u passive connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:165
-++#, c-format
-++msgid "%u active connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:167
-+ #, c-format
-+-msgid "%d SYN cookies sent"
-++msgid "%u packets rejects in established connections because of timestamp"
-++msgstr ""
-++
-++#: ../statistics.c:169
-++#, fuzzy, c-format
-++msgid "%u delayed acks sent"
-+ msgstr "%d pacotes enviados"
-+ 
-+-#: ../statistics.c:143
-++#: ../statistics.c:170
-+ #, c-format
-+-msgid "%d SYN cookies received"
-+-msgstr "%d pacotes recebidos"
-++msgid "%u delayed acks further delayed because of locked socket"
-++msgstr ""
-+ 
-+-#: ../statistics.c:144
-++#: ../statistics.c:172
-+ #, c-format
-+-msgid "%d invalid SYN cookies received"
-+-msgstr "%d pacotes recebidos"
-++msgid "Quick ack mode was activated %u times"
-++msgstr ""
-+ 
-+-#: ../statistics.c:146
-++#: ../statistics.c:173
-+ #, c-format
-+-msgid "%d resets received for embryonic SYN_RECV sockets"
-+-msgstr "%d resets recebidos para sockets embriônicos SYN_RECV"
-++msgid "%u times the listen queue of a socket overflowed"
-++msgstr ""
-+ 
-+-#: ../statistics.c:148
-++#: ../statistics.c:175
-+ #, c-format
-+-msgid "%d packets pruned from receive queue because of socket buffer overrun"
-++msgid "%u SYNs to LISTEN sockets ignored"
-+ msgstr ""
-+-"%d pacotes retirados da fila de recepção devido a sobreposição de buffers de "
-+-"sockets"
-+ 
-+-#. obsolete: 2.2.0 doesn't do that anymore
-+-#: ../statistics.c:151
-++#: ../statistics.c:176
-++#, c-format
-++msgid "%u packets directly queued to recvmsg prequeue."
-++msgstr ""
-++
-++#: ../statistics.c:178
-+ #, c-format
-+-msgid "%d packets pruned from out-of-order queue"
-++msgid "%u of bytes directly received from backlog"
-++msgstr ""
-++
-++#: ../statistics.c:180
-++#, c-format
-++msgid "%u of bytes directly received from prequeue"
-++msgstr ""
-++
-++#: ../statistics.c:182
-++#, fuzzy, c-format
-++msgid "%u packets dropped from prequeue"
-+ msgstr "%d pacotes retirados da fila de fora de ordem (out-of-order)"
-+ 
-+-#: ../statistics.c:152
-++#: ../statistics.c:183
-++#, fuzzy, c-format
-++msgid "%u packet headers predicted"
-++msgstr "%d pacotes recebidos"
-++
-++#: ../statistics.c:184
-+ #, c-format
-+-msgid ""
-+-"%d packets dropped from out-of-order queue because of socket buffer overrun"
-++msgid "%u packets header predicted and directly queued to user"
-+ msgstr ""
-+-"%d pacotes descartados da fila de fora de ordem devido a sobreposição de "
-+-"buffers de sockets"
-+ 
-+-#: ../statistics.c:154
-++#: ../statistics.c:186
-+ #, c-format
-+-msgid "%d ICMP packets dropped because they were out-of-window"
-+-msgstr "%d pacotes ICMP descartados porque estavam fora da janela"
-++msgid "Ran %u times out of system memory during packet sending"
-++msgstr ""
-+ 
-+-#: ../statistics.c:156
-++#: ../statistics.c:188
-++#, fuzzy, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr "%d pacotes para portas desconhecidas recebidos."
-++
-++#: ../statistics.c:189
-+ #, c-format
-+-msgid "%d ICMP packets dropped because socket was locked"
-+-msgstr "%d pacotes ICMP descartadas porque o socket estava bloqueado"
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-++
-++#: ../statistics.c:192
-++#, fuzzy, c-format
-++msgid "%u bad SACKs received"
-++msgstr "%d segmentos ruins recebidos."
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:197
-++#, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr ""
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr ""
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, fuzzy, c-format
-++msgid "%u retransmits lost"
-++msgstr "%d resets enviados"
-++
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, fuzzy, c-format
-++msgid "%u fast retransmits"
-++msgstr "%d segmentos retransmitidos"
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, fuzzy, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "%d segmentos retransmitidos"
-++
-++#: ../statistics.c:210
-++#, fuzzy, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "%d remontagens de pacotes falharam"
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, fuzzy, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr "%d pacotes retirados da fila de recepção devido a sobreposição de buffers de sockets"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, fuzzy, c-format
-++msgid "%u DSACKs received"
-++msgstr "%d pacotes recebidos"
-++
-++#: ../statistics.c:216
-++#, fuzzy, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "%d total de pacotes recebidos"
-++
-++#: ../statistics.c:217
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "%d resets de conexão recebidas"
-++
-++#: ../statistics.c:218
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "%d resets de conexão recebidas"
-++
-++#: ../statistics.c:219
-++#, fuzzy, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "%d resets de conexão recebidas"
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, fuzzy, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "%d resets de conexão recebidas"
-+ 
-+ #: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr "habilitado"
-+ 
-+-#: ../statistics.c:222
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr "desabilitado"
-+ 
-+-#: ../statistics.c:272
-+-#, c-format
-+-msgid "unknown title %s\n"
-+-msgstr "título %s desconhecido\n"
-+-
-+-#: ../statistics.c:298
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr "erro lendo /proc/net/snmp"
-+ 
-+-#: ../statistics.c:311
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr "não foi possível abrir /proc/net/snmp"
-+ 
-+@@ -1819,89 +2074,95 @@ msgstr "O tipo de hardware `%s' não é su
-+ msgid "Cannot change line discipline to `%s'.\n"
-+ msgstr "Não foi possível mudar a disciplina da linha para `%s'.\n"
-+ 
-+-#: ../lib/af.c:145 ../lib/hw.c:148
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr "Não Especificado"
-+ 
-+-#: ../lib/af.c:147
-++#: ../lib/af.c:155
-+ msgid "UNIX Domain"
-+ msgstr "UNIX Domain"
-+ 
-+-#: ../lib/af.c:150
-++#: ../lib/af.c:158
-+ msgid "DARPA Internet"
-+ msgstr "DARPA Internet"
-+ 
-+-#: ../lib/af.c:153
-++#: ../lib/af.c:161
-+ msgid "IPv6"
-+ msgstr "IPv6"
-+ 
-+-#: ../lib/af.c:156 ../lib/hw.c:169
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr "AX.25 AMPR"
-+ 
-+-#: ../lib/af.c:159 ../lib/hw.c:175
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr "NET/ROM AMPR"
-+ 
-+-#: ../lib/af.c:162
-++#: ../lib/af.c:170
-+ msgid "Novell IPX"
-+ msgstr "Novell IPX"
-+ 
-+-#: ../lib/af.c:165
-++#: ../lib/af.c:173
-+ msgid "Appletalk DDP"
-+ msgstr "Appletalk DDP"
-+ 
-+-#: ../lib/af.c:168 ../lib/hw.c:207
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr "Econet"
-+ 
-+-#: ../lib/af.c:171 ../lib/hw.c:172
-++#: ../lib/af.c:179
-++msgid "CCITT X.25"
-++msgstr ""
-++
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr "AMPR ROSE"
-+ 
-+-#: ../lib/af.c:174 ../lib/hw.c:160
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr "Ash"
-+ 
-+-#: ../lib/af.c:232
-++#: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr "Por favor não especifique mais que uma família de endereços.\n"
-+ 
-+-#: ../lib/af.c:293
-++#: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr "Excesso no número de famílias de endereços.\n"
-+ 
-+-#: ../lib/af.c:304
-++#: ../lib/af.c:315
-+ #, c-format
-+ msgid "Unknown address family `%s'.\n"
-+ msgstr "Família de endereços `%s' desconhecida.\n"
-+ 
-+-#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
-+-#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
-+-#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
-+-#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
-+-msgid "[NONE SET]"
-+-msgstr "[Nenhum configurado]"
-+-
-+-#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-++#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-+ #, c-format
-+ msgid "in_arcnet(%s): invalid arcnet address!\n"
-+ msgstr "in_arcnet(%s): endereço arcnet inválido!\n"
-+ 
-+-#: ../lib/arcnet.c:108
-++#: ../lib/arcnet.c:97
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing : ignored!\n"
-+ msgstr "in_arcnet(%s): trailing : ignorado!\n"
-+ 
-+-#: ../lib/arcnet.c:120
-++#: ../lib/arcnet.c:109
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr "in_arcnet(%s): lixo no trailing!\n"
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+ msgstr "Endereço Ash mal formado"
-+ 
-++#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-++#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-++#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-++msgid "[NONE SET]"
-++msgstr "[Nenhum configurado]"
-++
-+ #: ../lib/ax25.c:97 ../lib/netrom.c:100
-+ msgid "Invalid callsign"
-+ msgstr "Callsign inválido"
-+@@ -1911,22 +2172,21 @@ msgid "Callsign too long"
-+ msgstr "Callsign muito longo"
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr "O AX.25 não foi configurado neste sistema.\n"
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr "Tabela de roteamento AX.25 do kernel\n"
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr "Destino      Iface    Uso\n"
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr "Tabela de roteamento para `ddp' ainda não suportada.\n"
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1942,253 +2202,268 @@ msgstr "in_ether(%s): trailing : ignorad
-+ msgid "in_ether(%s): trailing junk!\n"
-+ msgstr "in_ether(%s): lixo no trailing!\n"
-+ 
-+-#: ../lib/fddi.c:95 ../lib/fddi.c:110
-++#: ../lib/fddi.c:84 ../lib/fddi.c:99
-+ #, c-format
-+ msgid "in_fddi(%s): invalid fddi address!\n"
-+ msgstr "in_fddi(%S): endereço fddi inválido!\n"
-+ 
-+-#: ../lib/fddi.c:122
-++#: ../lib/fddi.c:111
-+ #, c-format
-+ msgid "in_fddi(%s): trailing : ignored!\n"
-+ msgstr "in_fddi(%s): trailing : ignorado!\n"
-+ 
-+-#: ../lib/fddi.c:134
-++#: ../lib/fddi.c:123
-+ #, c-format
-+ msgid "in_fddi(%s): trailing junk!\n"
-+ msgstr "in_fddi(%s): lixo no trailing!\n"
-+ 
-+-#: ../lib/getroute.c:97 ../lib/setroute.c:76
-++#: ../lib/getroute.c:101 ../lib/setroute.c:80
-+ #, c-format
-+ msgid "Address family `%s' not supported.\n"
-+ msgstr "Família de endereços `%s' não suportada.\n"
-+ 
-+-#: ../lib/getroute.c:103 ../lib/setroute.c:80
-++#: ../lib/getroute.c:107 ../lib/setroute.c:84
-+ #, c-format
-+ msgid "No routing for address family `%s'.\n"
-+ msgstr "Nenhum roteamento para a família `%s'\n"
-+ 
-+-#: ../lib/hippi.c:96 ../lib/hippi.c:111
-++#: ../lib/hippi.c:84 ../lib/hippi.c:99
-+ #, c-format
-+ msgid "in_hippi(%s): invalid hippi address!\n"
-+ msgstr "in_fddi(%S): endereço fddi inválido!\n"
-+ 
-+-#: ../lib/hippi.c:123
-++#: ../lib/hippi.c:111
-+ #, c-format
-+ msgid "in_hippi(%s): trailing : ignored!\n"
-+ msgstr "in_fddi(%s): trailing : ignorado!\n"
-+ 
-+-#: ../lib/hippi.c:134
-++#: ../lib/hippi.c:122
-+ #, c-format
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr "in_fddi(%s): lixo no trailing!\n"
-+ 
-+-#: ../lib/hw.c:147
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr "Loopback Local"
-+ 
-+-#: ../lib/hw.c:150
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr "SLIP"
-+ 
-+-#: ../lib/hw.c:151
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr "SLIP VJ"
-+ 
-+-#: ../lib/hw.c:152
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr "SLIP 6 bits"
-+ 
-+-#: ../lib/hw.c:153
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr "SLIP VJ 6 bits"
-+ 
-+-#: ../lib/hw.c:154
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr "SLIP Adaptativo"
-+ 
-+-#: ../lib/hw.c:157
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr "Ethernet"
-+ 
-+-#: ../lib/hw.c:163
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr "FDDI - Fibra Ótica"
-+ 
-+-#: ../lib/hw.c:166
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr "HIPPI"
-+ 
-+-#: ../lib/hw.c:178
-++#: ../lib/hw.c:191
-++msgid "generic X.25"
-++msgstr ""
-++
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr "Túnel IPIP"
-+ 
-+-#: ../lib/hw.c:181
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+ msgstr "Protocolo Ponto-a-Ponto"
-+ 
-+-#: ../lib/hw.c:184
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr "(Cisco)-HDLC"
-+ 
-+-#: ../lib/hw.c:185
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:188
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr "ARCnet"
-+ 
-+-#: ../lib/hw.c:191
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr "Frame Relay DLCI"
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr "FRAD - Dispositivo de Acesso a Frame Relay"
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr "IPv6 sobre IPv4"
-+ 
-+-#: ../lib/hw.c:198
-++#: ../lib/hw.c:214
-+ msgid "IrLAP"
-+ msgstr "IrLAP"
-+ 
-+-#: ../lib/hw.c:201
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr "16/4 Mbps Token Ring"
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:219
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr "16/4 Mbps Token Ring (Novo)"
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+ msgstr "rresolve: família de endereços %d não suportada!\n"
-+ 
-+-#: ../lib/inet6_gr.c:79
-++#: ../lib/inet6.c:131
-++#, fuzzy
-++msgid "[UNKNOWN]"
-++msgstr "DESCONHECIDA"
-++
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr "NET/ROM não configurado neste sistema.\n"
-+ 
-+-#: ../lib/inet6_gr.c:82
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+ msgstr "Tabela de Roteamento IPv6 do Kernel\n"
-+ 
-+-#: ../lib/inet6_gr.c:84
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-+-msgstr ""
-+-"Destino                                     Próximo \"Hop\"                  "
-+-"        Opções Métrica Ref   Uso Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-++msgstr "Destino                                     Próximo \"Hop\"                          Opções Métrica Ref   Uso Iface\n"
-+ 
-+-#: ../lib/inet6_gr.c:158
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr "Cache de Vizinhos IPv6 do Kernel\n"
-+ 
-+-#: ../lib/inet6_gr.c:161
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+-msgstr ""
-+-"Vizinho                                     Endereço HW       Iface   Opções "
-+-"Estado Ref\n"
-++msgstr "Vizinho                                     Endereço HW       Iface   Opções Estado Ref\n"
-+ 
-+-#: ../lib/inet6_gr.c:165
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+ msgstr ""
-+-"Vizinho                                     Endereço HW       Iface   Opções "
-+-"Estado Ref\n"
-++"Vizinho                                     Endereço HW       Iface   Opções Estado Ref\n"
-+ "       Parado(seg) Remover(seg)\n"
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr "Uso: inet6_route [-vF] del Destino\n"
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr "       inet6_route [-vF] add Destino [gw Gw] [metric M] [[dev] If]\n"
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet6_route [-FC] flush      NÃO suportado\n"
-+ 
-+-#: ../lib/inet6_sr.c:182
-++#: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+ msgstr "Limpeza da tabela de roteamento `inet6' não é suportada\n"
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr "NET/ROM não configurado neste sistema.\n"
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+ msgstr "Tabela de Roteamento IP do Kernel\n"
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+-msgstr ""
-+-"Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso "
-+-"Iface\n"
-++msgstr "Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+-msgstr ""
-+-"Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt "
-+-"Iface\n"
-++msgstr "Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+-msgstr ""
-+-"Destino         Roteador        MáscaraGen     Opções Métrica Ref   Uso "
-+-"Iface    MSS   Janela irtt\n"
-++msgstr "Destino         Roteador        MáscaraGen     Opções Métrica Ref   Uso Iface    MSS   Janela irtt\n"
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+ msgstr "Tabela de Roteamento IP do Kernel\n"
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+-msgstr ""
-+-"Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso "
-+-"Iface\n"
-++msgstr "Destino         Roteador        MáscaraGen.    Opções Métrica Ref   Uso Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+-msgstr ""
-+-"Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt "
-+-"Iface\n"
-++msgstr "Destino         Roteador        MáscaraGen.    Opções   MSS Janela  irtt Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+-msgstr ""
-+-"Destino         Roteador        Origem         Opções Métrica Ref   Uso "
-+-"Iface    MSS   Janela irtt   HH  Arp\n"
-++msgstr "Destino         Roteador        Origem         Opções Métrica Ref   Uso Iface    MSS   Janela irtt   HH  Arp\n"
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+-msgstr ""
-+-"Destino         Roteador        Origem         Opções Métrica Ref   Uso "
-+-"Iface    MSS   Janela irtt   HH  Arp\n"
-++msgstr "Destino         Roteador        Origem         Opções Métrica Ref   Uso Iface    MSS   Janela irtt   HH  Arp\n"
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+@@ -2196,31 +2471,36 @@ msgstr ""
-+ "Uso: inet_route [-vF] del {-host|-net} Destino[/prefixo] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Destino[/prefixo] [gw Gw] [metric "
-+ "M]\n"
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Destino[/prefixo] [metric M] "
-+ "reject\n"
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet_route [-FC] flush      NÃO suportado\n"
-+ 
-+@@ -2230,14 +2510,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr "route: %s: não é possível usar uma REDE como roteador!\n"
-+ 
-+ #: ../lib/inet_sr.c:174
-++#, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr "route: MSS inválido.\n"
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr "route: janela inválida.\n"
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr "route: rtt inicial inválido.\n"
-+ 
-+@@ -2252,75 +2535,92 @@ msgid "route: bogus netmask %s\n"
-+ msgstr "route: netmask %s inválida\n"
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr "route: a netmask não casa com o endereço de rede\n"
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+ msgstr "Não é suportado limpar a tabela de roteamento `inet'\n"
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+ msgstr "Não é suportado modificar o cache de roteamento `inet'\n"
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr "O AX.25 não foi configurado neste sistema.\n"
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+ msgstr "Tabela de roteamento IPX do kernel\n"
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+ msgstr "Destino                   Rede Roteadora            Nó Roteador\n"
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+ msgstr "NET/ROM: isto precisa ser escrito\n"
-+ 
-+-#: ../lib/masq_info.c:197
-++#: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr "Entradas de IP mascarado\n"
-+ 
-+-#: ../lib/masq_info.c:200
-++#: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr "prot   expira origem               destino             portas\n"
-+ 
-+-#: ../lib/masq_info.c:203
-++#: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+-"prot   expira    initseq delta prevd origem               destino            "
-+-" portas\n"
-++"prot   expira    initseq delta prevd origem               "
-++"destino             portas\n"
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr "NET/ROM não configurado neste sistema.\n"
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+ msgstr "Tabela de roteamento NET/ROM do kernel\n"
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr "Destino      Mnemônico Qualidade Vizinho   Iface\n"
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+ msgstr "uso de netrom\n"
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+ msgstr "NET/ROM: isto precisa ser escrito\n"
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr "Você não pode iniciar o PPP com este programa.\n"
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+ msgstr "Desculpe, use o pppd!\n"
-+ 
-+@@ -2329,51 +2629,314 @@ msgid "Node address must be ten digits"
-+ msgstr "Endereço do nó deve ter dez dígitos"
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr "ROSE não configurada neste sistema.\n"
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+ msgstr "Tabela de roteamento ROSE do kernel\n"
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr "in_tr(%s): endereço token ring inválido!\n"
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr "in_tr(%s): trailing : ignorado!\n"
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr "in_tr(%s): lixo no trailing!\n"
-+ 
-+-#: ../lib/interface.c:124
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+ msgstr "atenção: nenhum socket inet disponível: %s\n"
-+ 
-+-#: ../lib/interface.c:270
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr "Atenção: não foi possível abrir %s (%s). Saída limitada.\n"
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:504
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr "%s: dispositivo não encontrado"
-+ 
-+-#: ../lib/interface.c:508
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-++msgstr "%s: erro obtendo informações da interface: %s\n"
-++
-++#: ../lib/interface.c:608
-++msgid "     - no statistics available -"
-++msgstr "     - estatísticas não disponíveis -"
-++
-++#: ../lib/interface.c:612
-++#, c-format
-++msgid "[NO FLAGS]"
-++msgstr "[SEM FLAGS]"
-++
-++#: ../lib/interface.c:688
-++#, c-format
-++msgid "%-9.9s Link encap:%s  "
-++msgstr "%-9.9s  Encapsulamento do Link: %s  "
-++
-++#: ../lib/interface.c:693
-++#, c-format
-++msgid "HWaddr %s  "
-++msgstr "Endereço de HW %s  "
-++
-++#: ../lib/interface.c:696
-++#, c-format
-++msgid "Media:%s"
-++msgstr "Mídia:%s"
-++
-++#: ../lib/interface.c:698
-++#, c-format
-++msgid "(auto)"
-++msgstr "(auto)"
-++
-++#: ../lib/interface.c:705
-++#, c-format
-++msgid "          %s addr:%s "
-++msgstr "          %s end.: %s "
-++
-++#: ../lib/interface.c:708
-++#, c-format
-++msgid " P-t-P:%s "
-++msgstr " P-a-P:%s "
-++
-++#: ../lib/interface.c:711
-++#, c-format
-++msgid " Bcast:%s "
-++msgstr " Bcast:%s "
-++
-++#: ../lib/interface.c:713
-++#, c-format
-++msgid " Mask:%s\n"
-++msgstr " Masc:%s\n"
-++
-++#: ../lib/interface.c:730
-++#, c-format
-++msgid "          inet6 addr: %s/%d"
-++msgstr "          endereço inet6: %s/%d"
-++
-++#: ../lib/interface.c:732
-++#, c-format
-++msgid " Scope:"
-++msgstr " Escopo:"
-++
-++#: ../lib/interface.c:735
-++#, c-format
-++msgid "Global"
-++msgstr "Global"
-++
-++#: ../lib/interface.c:738
-++#, c-format
-++msgid "Link"
-++msgstr "Link"
-++
-++#: ../lib/interface.c:741
-++#, c-format
-++msgid "Site"
-++msgstr "Site"
-++
-++#: ../lib/interface.c:744
-++#, c-format
-++msgid "Compat"
-++msgstr "Compat"
-++
-++#: ../lib/interface.c:747
-++#, c-format
-++msgid "Host"
-++msgstr "Máquina"
-++
-++#: ../lib/interface.c:750
-++#, c-format
-++msgid "Unknown"
-++msgstr "Desconhecido"
-++
-++#: ../lib/interface.c:765
-++#, c-format
-++msgid "          IPX/Ethernet II addr:%s\n"
-++msgstr "      Endereço IPX/Ethernet II:%s\n"
-++
-++#: ../lib/interface.c:768
-++#, c-format
-++msgid "          IPX/Ethernet SNAP addr:%s\n"
-++msgstr "      Endereço IPX/Ethernet SNAP:%s\n"
-++
-++#: ../lib/interface.c:771
-++#, c-format
-++msgid "          IPX/Ethernet 802.2 addr:%s\n"
-++msgstr "      Endereço IPX/Ethernet 802.2:%s\n"
-++
-++#: ../lib/interface.c:774
-++#, c-format
-++msgid "          IPX/Ethernet 802.3 addr:%s\n"
-++msgstr "      Endereço IPX/Ethernet 802.3:%s\n"
-++
-++#: ../lib/interface.c:784
-++#, c-format
-++msgid "          EtherTalk Phase 2 addr:%s\n"
-++msgstr "          Endereço EtherTalk fase 2:%s\n"
-++
-++#: ../lib/interface.c:793
-++#, c-format
-++msgid "          econet addr:%s\n"
-++msgstr "          Endereço econet:%s\n"
-++
-++#: ../lib/interface.c:800
-++#, c-format
-++msgid "[NO FLAGS] "
-++msgstr "[NENHUMA FLAG] "
-++
-++#: ../lib/interface.c:802
-++#, c-format
-++msgid "UP "
-++msgstr "UP "
-++
-++#: ../lib/interface.c:804
-++#, c-format
-++msgid "BROADCAST "
-++msgstr "BROADCAST"
-++
-++#: ../lib/interface.c:806
-++#, c-format
-++msgid "DEBUG "
-++msgstr "DEBUG "
-++
-++#: ../lib/interface.c:808
-++#, c-format
-++msgid "LOOPBACK "
-++msgstr "LOOPBACK"
-++
-++#: ../lib/interface.c:810
-++#, c-format
-++msgid "POINTOPOINT "
-++msgstr "POINTOPOINT "
-++
-++#: ../lib/interface.c:812
-++#, c-format
-++msgid "NOTRAILERS "
-++msgstr "NOTRAILERS "
-++
-++#: ../lib/interface.c:814
-++#, c-format
-++msgid "RUNNING "
-++msgstr "RUNNING "
-++
-++#: ../lib/interface.c:816
-++#, c-format
-++msgid "NOARP "
-++msgstr "NOARP "
-++
-++#: ../lib/interface.c:818
-++#, c-format
-++msgid "PROMISC "
-++msgstr "PROMISC "
-++
-++#: ../lib/interface.c:820
-++#, c-format
-++msgid "ALLMULTI "
-++msgstr "ALLMULTI "
-++
-++#: ../lib/interface.c:822
-++#, c-format
-++msgid "SLAVE "
-++msgstr "SLAVE "
-++
-++#: ../lib/interface.c:824
-++#, c-format
-++msgid "MASTER "
-++msgstr "MASTER "
-++
-++#: ../lib/interface.c:826
-++#, c-format
-++msgid "MULTICAST "
-++msgstr "MULTICAST "
-++
-++#: ../lib/interface.c:829
-++#, c-format
-++msgid "DYNAMIC "
-++msgstr "DYNAMIC "
-++
-++#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-++#: ../lib/interface.c:832
-++#, c-format
-++msgid " MTU:%d  Metric:%d"
-++msgstr " MTU:%d  Métrica:%d"
-++
-++#: ../lib/interface.c:836
-++#, c-format
-++msgid "  Outfill:%d  Keepalive:%d"
-++msgstr "  Outfill:%d  Keepalive:%d"
-++
-++#: ../lib/interface.c:850
-++#, fuzzy, c-format
-++msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgstr "Pacotes RX:%lu erros:%lu descartados:%lu sobreposições:%lu frame:%lu\n"
-++
-++#: ../lib/interface.c:855
-++#, c-format
-++msgid "             compressed:%lu\n"
-++msgstr "             compactados:%lu\n"
-++
-++#: ../lib/interface.c:895
-++#, fuzzy, c-format
-++msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgstr "Pacotes TX:%lu erros:%lu descartados:%lu sobreposições:%lu portadora:%lu\n"
-++
-++#: ../lib/interface.c:899
-++#, c-format
-++msgid "          collisions:%lu "
-++msgstr "          colisões:%lu "
-++
-++#: ../lib/interface.c:901
-++#, c-format
-++msgid "compressed:%lu "
-++msgstr "compactados:%lu "
-++
-++#: ../lib/interface.c:903
-++#, c-format
-++msgid "txqueuelen:%d "
-++msgstr "txqueuelen:%d "
-++
-++#: ../lib/interface.c:905
-++#, c-format
-++msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+ msgstr ""
-+-"%s: erro obtendo informações da interface: %s\n"
-+-"\n"
-+ 
-+-#: ../lib/sockets.c:59
-++#: ../lib/interface.c:916
-++#, c-format
-++msgid "Interrupt:%d "
-++msgstr "IRQ:%d "
-++
-++#. Only print devices using it for
-++#. I/O maps
-++#: ../lib/interface.c:919
-++#, c-format
-++msgid "Base address:0x%x "
-++msgstr "Endereço de E/S:0x%x "
-++
-++#: ../lib/interface.c:921
-++#, c-format
-++msgid "Memory:%lx-%lx "
-++msgstr "Memória:%lx-%lx "
-++
-++#: ../lib/interface.c:924
-++#, c-format
-++msgid "DMA chan:%x "
-++msgstr "Canal DMA:%x "
-++
-++#: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr "Nenhuma família de endereços que possa ser usada foi encontrada.\n"
-+ 
-+@@ -2397,29 +2960,32 @@ msgstr "%s: endereço %s inválido.\n"
-+ msgid "ip: argument is wrong: %s\n"
-+ msgstr "ip: argumento errado: %s\n"
-+ 
-+-#: ../ipmaddr.c:56
-++#: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr "Uso: ipmaddr [ add | del ] ENDMULTI dev STRING\n"
-+ 
-+-#: ../ipmaddr.c:57
-++#: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ 
-+-#: ../ipmaddr.c:58
-++#: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr "       ipmaddr -V | -version\n"
-+ 
-+-#: ../ipmaddr.c:258
-++#: ../ipmaddr.c:263
-+ #, c-format
-+ msgid "family %d "
-+ msgstr "família %d "
-+ 
-+-#: ../ipmaddr.c:267
-++#: ../ipmaddr.c:272
-+ #, c-format
-+ msgid " users %d"
-+ msgstr " usuários %d"
-+ 
-+-#: ../ipmaddr.c:353
-++#: ../ipmaddr.c:358
-+ msgid "Cannot create socket"
-+ msgstr "Não foi possível criar o socket"
-+ 
-+@@ -2434,6 +3000,7 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr "slattach: tty_lock: (%s): %s\n"
-+ 
-+ #: ../slattach.c:192
-++#, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr "slattach: não foi possível escrever o arquivo PID\n"
-+ 
-+@@ -2452,39 +3019,69 @@ msgstr "slattach: tty_hangup(DROP): %s\n
-+ msgid "slattach: tty_hangup(RAISE): %s\n"
-+ msgstr "slattach: tty_hangup(RAISE): %s\n"
-+ 
-+-#: ../slattach.c:486
-++#: ../slattach.c:468
-++#, fuzzy, c-format
-++msgid "slattach: tty name too long\n"
-++msgstr "%s: nome muito longo\n"
-++
-++#: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr "slattach: tty_open: não foi possível obter o estado corrente!\n"
-+ 
-+-#: ../slattach.c:493
-++#: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+-msgstr ""
-+-"slattach: tty_open: não foi possível obter a disciplina de linha corrente!\n"
-++msgstr "slattach: tty_open: não foi possível obter a disciplina de linha corrente!\n"
-+ 
-+-#: ../slattach.c:501
-++#: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr "slattach: tty_open: não foi possível configurar o modo RAW!\n"
-+ 
-+-#: ../slattach.c:508
-++#: ../slattach.c:520
-+ #, c-format
-+ msgid "slattach: tty_open: cannot set %s bps!\n"
-+ msgstr "slattach: tty_open: não foi possível configurar %s bps!\n"
-+ 
-+-#: ../slattach.c:518
-++#: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr "slattach: tty_open: não foi possível configurar modo 8N1!\n"
-+ 
-+-#: ../slattach.c:686
-++#: ../slattach.c:672
-++#, c-format
-++msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++msgstr ""
-++
-++#: ../slattach.c:704
-+ #, c-format
-+ msgid "%s started"
-+ msgstr "%s inicializado"
-+ 
-+-#: ../slattach.c:687
-++#: ../slattach.c:705
-+ #, c-format
-+ msgid " on %s"
-+ msgstr " em %s"
-+ 
-+-#: ../slattach.c:688
-++#: ../slattach.c:706
-+ #, c-format
-+ msgid " interface %s\n"
-+ msgstr "%s: interface desconhecida.\n"
-++
-++#~ msgid ""
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-++#~ "<-''-\n"
-++#~ msgstr "  arp [-v]   [<HW>] [-i <if>] -s  <máquina> <end_hw>  [netmask <nm>] pub  <-''-\n"
-++
-++#~ msgid "%s: unknown interface: %s\n"
-++#~ msgstr "%s: interface desconhecida: %s\n"
-++
-++#~ msgid "address mask replies"
-++#~ msgstr "resposta a mascara de endereço"
-++
-++#~ msgid "unknown title %s\n"
-++#~ msgstr "título %s desconhecido\n"
-++
-++#~ msgid "Routing table for `ddp' not yet supported.\n"
-++#~ msgstr "Tabela de roteamento para `ddp' ainda não suportada.\n"
-+Index: net-tools/po/net-tools.pot
-+===================================================================
-+--- net-tools.orig/po/net-tools.pot
-++++ net-tools/po/net-tools.pot
-+@@ -1,253 +1,275 @@
-+ # SOME DESCRIPTIVE TITLE.
-+-# Copyright (C) YEAR Free Software Foundation, Inc.
-++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-++# This file is distributed under the same license as the PACKAGE package.
-+ # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-+ #
-+ #, fuzzy
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: PACKAGE VERSION\n"
-+-"POT-Creation-Date: 2001-04-15 15:40+0100\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+ "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-+ "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-+ "Language-Team: LANGUAGE <LL@li.org>\n"
-+ "MIME-Version: 1.0\n"
-+ "Content-Type: text/plain; charset=CHARSET\n"
-+-"Content-Transfer-Encoding: ENCODING\n"
-++"Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:111 ../arp.c:270
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:208 ../arp.c:222
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:240
-++#: ../arp.c:248
-+ #, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:244
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:253
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:283
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:291
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:388
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:404
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:417
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:438
-++#: ../arp.c:448
-++#, c-format
-+ msgid ""
-+ "Address                  HWtype  HWaddress           Flags Mask            "
-+ "Iface\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:468
-++#: ../arp.c:476
-++msgid "<from_interface>"
-++msgstr ""
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+ msgstr ""
-+ 
-+-#: ../arp.c:485
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr ""
-+ 
-+-#: ../arp.c:491
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr ""
-+ 
-+-#: ../arp.c:497
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr ""
-+ 
-+-#: ../arp.c:514
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:593
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:597
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:599
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+ "cache\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:615
-++#: ../arp.c:627
-++#, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:628
-++#, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:617
-++#: ../arp.c:629
-++#, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:618
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-
-+-#: ../arp.c:619
-++#: ../arp.c:630
-++#, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:623
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:624 ../netstat.c:1490 ../route.c:86
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:625 ../netstat.c:1491 ../route.c:87
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, c-format
-+ msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:627
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:628
-++#: ../arp.c:639
-++#, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:629
-++#: ../arp.c:640
-++#, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:632 ../rarp.c:183
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:666 ../arp.c:751
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:670
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:705
-++#: ../arp.c:716
-++#, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:715
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:724
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:743
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:756
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:70
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:75
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:78 ../hostname.c:98 ../hostname.c:117
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:90
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:95
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+ msgstr ""
-+@@ -262,103 +284,119 @@ msgstr ""
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:132
-++#: ../hostname.c:131
-+ #, c-format
-+ msgid "Resolving `%s' ...\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:138
-++#: ../hostname.c:137
-+ #, c-format
-+ msgid "Result: h_name=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:143
-++#: ../hostname.c:142
-+ #, c-format
-+ msgid "Result: h_aliases=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:148
-++#: ../hostname.c:147
-+ #, c-format
-+ msgid "Result: h_addr_list=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:210
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:225
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:227
-++#: ../hostname.c:225
-++#, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:238
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:240
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:242
-++#: ../hostname.c:240
-++#, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:244
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -367,587 +405,706 @@ msgid ""
-+ "   part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:340
-++#: ../hostname.c:338
-+ #, c-format
-+ msgid "%s: You can't change the DNS domain name with this command\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:341
-++#: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:342
-++#: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:359
-++#: ../hostname.c:357
-+ #, c-format
-+ msgid "gethostname()=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:376
-++#: ../hostname.c:374
-+ #, c-format
-+ msgid "getdomainname()=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../hostname.c:391
-++#: ../hostname.c:389
-+ #, c-format
-+ msgid "getnodename()=`%s'\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:108
-++#: ../ifconfig.c:107
-++#, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:130 ../ifconfig.c:162
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-+ #, c-format
-+-msgid "%s: unknown interface: %s\n"
-++msgid "%s: ERROR while getting interface flags: %s\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:154 ../ifconfig.c:734 ../ifconfig.c:825 ../ifconfig.c:936
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-++#, c-format
-+ msgid "No support for INET on this system.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:177
-++#: ../ifconfig.c:193
-++#, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:202
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:204
-++#, c-format
-+ msgid "  [add <address>[/<prefixlen>]]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:180
-++#: ../ifconfig.c:205
-++#, c-format
-+ msgid "  [del <address>[/<prefixlen>]]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:181
-++#: ../ifconfig.c:206
-++#, c-format
-+ msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:207
-++#, c-format
-+ msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:185
-++#: ../ifconfig.c:210
-++#, c-format
-+ msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:187
-++#: ../ifconfig.c:212
-++#, c-format
-+ msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:188
-++#: ../ifconfig.c:213
-++#, c-format
-+ msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:189
-++#: ../ifconfig.c:214
-++#, c-format
-+ msgid "  [multicast]  [[-]promisc]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:190
-++#: ../ifconfig.c:215
-++#, c-format
-+ msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:192
-++#: ../ifconfig.c:217
-++#, c-format
-+ msgid "  [txqueuelen <NN>]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:195
-++#: ../ifconfig.c:220
-++#, c-format
-+ msgid "  [[-]dynamic]\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:197
-++#: ../ifconfig.c:222
-++#, c-format
-+ msgid ""
-+ "  [up|down] ...\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:199
-++#: ../ifconfig.c:224
-++#, c-format
-+ msgid "  <HW>=Hardware Type.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:200
-++#: ../ifconfig.c:225
-++#, c-format
-+ msgid "  List of possible hardware types:\n"
-+ msgstr ""
-+ 
-+ #. 1 = ARPable
-+-#: ../ifconfig.c:202
-++#: ../ifconfig.c:227
-+ #, c-format
-+ msgid "  <AF>=Address family. Default: %s\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:203
-++#: ../ifconfig.c:228
-++#, c-format
-+ msgid "  List of possible address families:\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:278
-++#: ../ifconfig.c:303
-+ #, c-format
-+ msgid "ifconfig: option `%s' not recognised.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:280 ../ifconfig.c:925
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-+ msgid "ifconfig: `--help' gives usage information.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:355
-++#: ../ifconfig.c:380
-++#, c-format
-+ msgid "Unknown media type.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:647
-++#: ../ifconfig.c:417
-++#, c-format
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:429
-++#, c-format
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:441
-++#, c-format
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:465
-++#, c-format
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:523
-++#, c-format
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:652
-++#, c-format
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:684
-+ #, c-format
-+ msgid "hw address type `%s' has no handler to set address. failed.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:656
-++#: ../ifconfig.c:693
-+ #, c-format
-+ msgid "%s: invalid %s address.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:700 ../ifconfig.c:790 ../ifconfig.c:876
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-++#, c-format
-+ msgid "No support for INET6 on this system.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:743 ../ifconfig.c:834
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-+ #, c-format
-+ msgid "Interface %s not initialized\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:755 ../ifconfig.c:845
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, c-format
-+ msgid "Bad address.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:848
-++#: ../ifconfig.c:885
-++#, c-format
-+ msgid "Address deletion not supported on this system.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:920
-++#: ../ifconfig.c:957
-++#, c-format
-+ msgid "ifconfig: Cannot set address for this protocol family.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:946
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr ""
-+ 
-+-#: ../ifconfig.c:954
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:430
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:434
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:441 ../netstat.c:1176 ../netstat.c:1253
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:442
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:443 ../netstat.c:1255
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:444 ../netstat.c:511 ../netstat.c:894 ../netstat.c:1256
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:467
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:477 ../netstat.c:1295
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:512
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:513
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:514
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:515
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:516
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:517
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:518
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:519
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:520
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:521
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:592
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:597 ../netstat.c:635 ../netstat.c:756 ../netstat.c:888
-+-#: ../netstat.c:1019 ../netstat.c:1024
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:610 ../netstat.c:615 ../netstat.c:623 ../netstat.c:630
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:673
-++#: ../netstat.c:677
-++#, c-format
-+ msgid "Active X.25 sockets\n"
-+ msgstr ""
-+ 
-+ #. IMHO, Vr/Vs is not very usefull --SF
-+-#: ../netstat.c:675
-++#: ../netstat.c:679
-++#, c-format
-+ msgid ""
-+-"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  "
-+-"Recv-Q\n"
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:752
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:793 ../netstat.c:943 ../netstat.c:1062
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:797
-++#: ../netstat.c:804
-+ #, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:802
-++#: ../netstat.c:809
-+ #, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:807
-++#: ../netstat.c:814
-+ #, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:812 ../netstat.c:952 ../netstat.c:1072
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:884
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:902 ../netstat.c:1162 ../netstat.c:1195
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:948 ../netstat.c:1067
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1033
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1115
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1142
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1146
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1150
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1154
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1158
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1167
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1183
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1187
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1191
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1222
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1224 ../netstat.c:1735
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1227 ../netstat.c:1738
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1229 ../netstat.c:1740
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1232
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1234
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1254
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1257
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1271
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1272
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1315
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1366
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+ "State"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1368
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1402
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1410
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1448
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1452
-++#: ../netstat.c:1465
-++#, c-format
-+ msgid ""
-+-"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1456
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1479
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1480
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1481
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1483
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1484
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1485
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1486
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1488
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1492
-++#: ../netstat.c:1505
-++#, c-format
-+ msgid "        --numeric-hosts          don't resolve host names\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1493
-++#: ../netstat.c:1506
-++#, c-format
-+ msgid "        --numeric-ports          don't resolve port names\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1494
-++#: ../netstat.c:1507
-++#, c-format
-+ msgid "        --numeric-users          don't resolve user names\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1495
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1496 ../route.c:88
-++#: ../netstat.c:1509 ../route.c:88
-++#, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1497
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1498
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1499
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1500
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1501
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1502 ../route.c:89
-++#: ../netstat.c:1515 ../route.c:89
-++#, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1503 ../route.c:90
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1505
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1506 ../route.c:92
-++#: ../netstat.c:1519
-+ #, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1507 ../route.c:93
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1732
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1742
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1744
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1747
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1777
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1778
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr ""
-+ 
-+@@ -986,23 +1143,28 @@ msgid "rarp: cannot set entry from %s:%u
-+ msgstr ""
-+ 
-+ #: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+ msgstr ""
-+ 
-+ #: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+ msgstr ""
-+ 
-+ #: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+ msgstr ""
-+ 
-+ #: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+ msgstr ""
-+ 
-+ #: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+@@ -1019,38 +1181,50 @@ msgid "rarp: %s: unknown hardware type.\
-+ msgstr ""
-+ 
-+ #: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+ 
-+ #: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+ msgstr ""
-+ 
-+ #: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+ msgstr ""
-+ 
-+ #: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+ "\n"
-+ msgstr ""
-+ 
-++#: ../route.c:92
-++#, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr ""
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr ""
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr ""
-+ 
-+ #: ../plipconfig.c:68
-++#, c-format
-+ msgid "       plipconfig -V | --version\n"
-+ msgstr ""
-+ 
-+@@ -1060,61 +1234,75 @@ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr ""
-+ 
-+@@ -1128,22 +1316,27 @@ msgid "unknown"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+ msgstr ""
-+ 
-+@@ -1153,10 +1346,12 @@ msgid "Failed to get type of [%s]\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr ""
-+ 
-+ #: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr ""
-+ 
-+@@ -1563,12 +1758,12 @@ msgstr ""
-+ 
-+ #: ../statistics.c:178
-+ #, c-format
-+-msgid "%u packets directly received from backlog"
-++msgid "%u of bytes directly received from backlog"
-+ msgstr ""
-+ 
-+ #: ../statistics.c:180
-+ #, c-format
-+-msgid "%u packets directly received from prequeue"
-++msgid "%u of bytes directly received from prequeue"
-+ msgstr ""
-+ 
-+ #: ../statistics.c:182
-+@@ -1578,7 +1773,7 @@ msgstr ""
-+ 
-+ #: ../statistics.c:183
-+ #, c-format
-+-msgid "%u packets header predicted"
-++msgid "%u packet headers predicted"
-+ msgstr ""
-+ 
-+ #: ../statistics.c:184
-+@@ -1591,19 +1786,209 @@ msgstr ""
-+ msgid "Ran %u times out of system memory during packet sending"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:253
-++#: ../statistics.c:188
-++#, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr ""
-++
-++#: ../statistics.c:189
-++#, c-format
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-++
-++#: ../statistics.c:192
-++#, c-format
-++msgid "%u bad SACKs received"
-++msgstr ""
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:197
-++#, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr ""
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr ""
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, c-format
-++msgid "%u retransmits lost"
-++msgstr ""
-++
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, c-format
-++msgid "%u fast retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr ""
-++
-++#: ../statistics.c:210
-++#, c-format
-++msgid "%u sack retransmits failed"
-++msgstr ""
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr ""
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, c-format
-++msgid "%u DSACKs received"
-++msgstr ""
-++
-++#: ../statistics.c:216
-++#, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr ""
-++
-++#: ../statistics.c:217
-++#, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr ""
-++
-++#: ../statistics.c:218
-++#, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr ""
-++
-++#: ../statistics.c:219
-++#, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr ""
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr ""
-++
-++#: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:253
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:336
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:349
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr ""
-+ 
-+@@ -1617,7 +2002,7 @@ msgstr ""
-+ msgid "Cannot change line discipline to `%s'.\n"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:153 ../lib/hw.c:156
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr ""
-+ 
-+@@ -1633,11 +2018,11 @@ msgstr ""
-+ msgid "IPv6"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:164 ../lib/hw.c:177
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:167 ../lib/hw.c:183
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr ""
-+ 
-+@@ -1649,7 +2034,7 @@ msgstr ""
-+ msgid "Appletalk DDP"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:176 ../lib/hw.c:218
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr ""
-+ 
-+@@ -1657,19 +2042,21 @@ msgstr ""
-+ msgid "CCITT X.25"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:182 ../lib/hw.c:180
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:185 ../lib/hw.c:168
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr ""
-+ 
-+ #: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr ""
-+ 
-+@@ -1694,6 +2081,7 @@ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+ msgstr ""
-+ 
-+@@ -1712,22 +2100,21 @@ msgid "Callsign too long"
-+ msgstr ""
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr ""
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr ""
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr ""
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1783,90 +2170,94 @@ msgstr ""
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:155
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:158
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:159
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:160
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:161
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:162
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:165
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:171
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:174
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:186
-++#: ../lib/hw.c:191
-+ msgid "generic X.25"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:189
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:196
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:199
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:202
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:206
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:209
-++#: ../lib/hw.c:214
-+ msgid "IrLAP"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:212
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:214
-++#: ../lib/hw.c:219
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr ""
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+@@ -1877,131 +2268,157 @@ msgid "[UNKNOWN]"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+ msgstr ""
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr ""
-+ 
-+@@ -2011,14 +2428,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:174
-++#, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr ""
-+ 
-+@@ -2033,73 +2453,90 @@ msgid "route: bogus netmask %s\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+ msgstr ""
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+ msgstr ""
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+ msgstr ""
-+ 
-+ #: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr ""
-+ 
-+ #: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr ""
-+ 
-+ #: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+ msgstr ""
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr ""
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+ msgstr ""
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+ msgstr ""
-+ 
-+@@ -2108,287 +2545,314 @@ msgid "Node address must be ten digits"
-+ msgstr ""
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr ""
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+ msgstr ""
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr ""
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr ""
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:164
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:316
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr ""
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:556
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:560
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:593
-++#: ../lib/interface.c:608
-+ msgid "     - no statistics available -"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:597
-++#: ../lib/interface.c:612
-++#, c-format
-+ msgid "[NO FLAGS]"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:673
-++#: ../lib/interface.c:688
-+ #, c-format
-+ msgid "%-9.9s Link encap:%s  "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:678
-++#: ../lib/interface.c:693
-+ #, c-format
-+ msgid "HWaddr %s  "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:681
-++#: ../lib/interface.c:696
-+ #, c-format
-+ msgid "Media:%s"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:683
-++#: ../lib/interface.c:698
-++#, c-format
-+ msgid "(auto)"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:690
-++#: ../lib/interface.c:705
-+ #, c-format
-+ msgid "          %s addr:%s "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:693
-++#: ../lib/interface.c:708
-+ #, c-format
-+ msgid " P-t-P:%s "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:696
-++#: ../lib/interface.c:711
-+ #, c-format
-+ msgid " Bcast:%s "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:698
-++#: ../lib/interface.c:713
-+ #, c-format
-+ msgid " Mask:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:715
-++#: ../lib/interface.c:730
-+ #, c-format
-+ msgid "          inet6 addr: %s/%d"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:717
-++#: ../lib/interface.c:732
-++#, c-format
-+ msgid " Scope:"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:720
-++#: ../lib/interface.c:735
-++#, c-format
-+ msgid "Global"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:723
-++#: ../lib/interface.c:738
-++#, c-format
-+ msgid "Link"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:726
-++#: ../lib/interface.c:741
-++#, c-format
-+ msgid "Site"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:729
-++#: ../lib/interface.c:744
-++#, c-format
-+ msgid "Compat"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:732
-++#: ../lib/interface.c:747
-++#, c-format
-+ msgid "Host"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:735
-++#: ../lib/interface.c:750
-++#, c-format
-+ msgid "Unknown"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:750
-++#: ../lib/interface.c:765
-+ #, c-format
-+ msgid "          IPX/Ethernet II addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:753
-++#: ../lib/interface.c:768
-+ #, c-format
-+ msgid "          IPX/Ethernet SNAP addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:756
-++#: ../lib/interface.c:771
-+ #, c-format
-+ msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:759
-++#: ../lib/interface.c:774
-+ #, c-format
-+ msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:769
-++#: ../lib/interface.c:784
-+ #, c-format
-+ msgid "          EtherTalk Phase 2 addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:778
-++#: ../lib/interface.c:793
-+ #, c-format
-+ msgid "          econet addr:%s\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:785
-++#: ../lib/interface.c:800
-++#, c-format
-+ msgid "[NO FLAGS] "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:787
-++#: ../lib/interface.c:802
-++#, c-format
-+ msgid "UP "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:789
-++#: ../lib/interface.c:804
-++#, c-format
-+ msgid "BROADCAST "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:791
-++#: ../lib/interface.c:806
-++#, c-format
-+ msgid "DEBUG "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:793
-++#: ../lib/interface.c:808
-++#, c-format
-+ msgid "LOOPBACK "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:795
-++#: ../lib/interface.c:810
-++#, c-format
-+ msgid "POINTOPOINT "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:797
-++#: ../lib/interface.c:812
-++#, c-format
-+ msgid "NOTRAILERS "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:799
-++#: ../lib/interface.c:814
-++#, c-format
-+ msgid "RUNNING "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:801
-++#: ../lib/interface.c:816
-++#, c-format
-+ msgid "NOARP "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:803
-++#: ../lib/interface.c:818
-++#, c-format
-+ msgid "PROMISC "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:805
-++#: ../lib/interface.c:820
-++#, c-format
-+ msgid "ALLMULTI "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:807
-++#: ../lib/interface.c:822
-++#, c-format
-+ msgid "SLAVE "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:809
-++#: ../lib/interface.c:824
-++#, c-format
-+ msgid "MASTER "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:811
-++#: ../lib/interface.c:826
-++#, c-format
-+ msgid "MULTICAST "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:814
-++#: ../lib/interface.c:829
-++#, c-format
-+ msgid "DYNAMIC "
-+ msgstr ""
-+ 
-+ #. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+-#: ../lib/interface.c:817
-++#: ../lib/interface.c:832
-+ #, c-format
-+ msgid " MTU:%d  Metric:%d"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:821
-++#: ../lib/interface.c:836
-+ #, c-format
-+ msgid "  Outfill:%d  Keepalive:%d"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:835
-++#: ../lib/interface.c:850
-+ #, c-format
-+ msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:840
-++#: ../lib/interface.c:855
-+ #, c-format
-+ msgid "             compressed:%lu\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:852
-++#: ../lib/interface.c:895
-+ #, c-format
-+ msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:856
-++#: ../lib/interface.c:899
-+ #, c-format
-+ msgid "          collisions:%lu "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:858
-++#: ../lib/interface.c:901
-+ #, c-format
-+ msgid "compressed:%lu "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:860
-++#: ../lib/interface.c:903
-+ #, c-format
-+ msgid "txqueuelen:%d "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:862
-++#: ../lib/interface.c:905
-+ #, c-format
-+ msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:873
-++#: ../lib/interface.c:916
-+ #, c-format
-+ msgid "Interrupt:%d "
-+ msgstr ""
-+ 
-+ #. Only print devices using it for
-+ #. I/O maps
-+-#: ../lib/interface.c:876
-++#: ../lib/interface.c:919
-+ #, c-format
-+ msgid "Base address:0x%x "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:878
-++#: ../lib/interface.c:921
-+ #, c-format
-+ msgid "Memory:%lx-%lx "
-+ msgstr ""
-+ 
-+-#: ../lib/interface.c:881
-++#: ../lib/interface.c:924
-+ #, c-format
-+ msgid "DMA chan:%x "
-+ msgstr ""
-+ 
-+ #: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr ""
-+ 
-+@@ -2413,14 +2877,17 @@ msgid "ip: argument is wrong: %s\n"
-+ msgstr ""
-+ 
-+ #: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr ""
-+ 
-+ #: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr ""
-+ 
-+ #: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr ""
-+ 
-+@@ -2449,6 +2916,7 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr ""
-+ 
-+ #: ../slattach.c:192
-++#, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr ""
-+ 
-+@@ -2468,18 +2936,22 @@ msgid "slattach: tty_hangup(RAISE): %s\n
-+ msgstr ""
-+ 
-+ #: ../slattach.c:468
-++#, c-format
-+ msgid "slattach: tty name too long\n"
-+ msgstr ""
-+ 
-+ #: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr ""
-+ 
-+ #: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+ msgstr ""
-+ 
-+ #: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr ""
-+ 
-+@@ -2489,6 +2961,7 @@ msgid "slattach: tty_open: cannot set %s
-+ msgstr ""
-+ 
-+ #: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr ""
-+ 
-+Index: net-tools/po/et_EE.po
-+===================================================================
-+--- net-tools.orig/po/et_EE.po
-++++ net-tools/po/et_EE.po
-+@@ -6,7 +6,8 @@
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: net-tools 1.58\n"
-+-"POT-Creation-Date: 2001-02-15 21:28+0200\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+ "PO-Revision-Date: 2001-02-15 18:00+0300\n"
-+ "Last-Translator: Meelis Roos <mroos@linux.ee>\n"
-+ "Language-Team: Estonian <linux-ee@eenet.ee>\n"
-+@@ -14,53 +15,58 @@ msgstr ""
-+ "Content-Type: text/plain; charset=iso-8859-15\n"
-+ "Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:110 ../arp.c:269
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+ msgstr "arp: puudub hosti nimi\n"
-+ 
-+-#: ../arp.c:207 ../arp.c:221
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+ msgstr "%s jaoks pole ARP kirjet\n"
-+ 
-+-#: ../arp.c:239
-++#: ../arp.c:248
-+ #, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr "arp: ei saa riistvaralist aadressi `%s' jaoks: %s\n"
-+ 
-+-#: ../arp.c:243
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr "arp: vale protokolli tüüp\n"
-+ 
-+-#: ../arp.c:252
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+ msgstr "arp: seadmel `%s' on riistvaraline aadress %s `%s'\n"
-+ 
-+-#: ../arp.c:282
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+ msgstr "arp: puudub riistvaraline aadress\n"
-+ 
-+-#: ../arp.c:290
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr "arp: vigane riistvaraline aadress\n"
-+ 
-+-#: ../arp.c:387
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr "arp: ei saa avada faili %s\n"
-+ 
-+-#: ../arp.c:403
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr "arp: formaadiviga real %u failis %s\n"
-+ 
-+-#: ../arp.c:416
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr "arp: ei saa kehtestada ARP kirjet real %u failis %s\n"
-+ 
-+-#: ../arp.c:437
-++#: ../arp.c:448
-++#, c-format
-+ msgid ""
-+ "Address                  HWtype  HWaddress           Flags Mask            "
-+ "Iface\n"
-+@@ -68,45 +74,52 @@ msgstr ""
-+ "Aadress                  HWtüüp  HWaadress           Lipud Mask            "
-+ "Liides\n"
-+ 
-+-#: ../arp.c:467
-++#: ../arp.c:476
-++#, fuzzy
-++msgid "<from_interface>"
-++msgstr " liides %s\n"
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+ msgstr "(mittetäielik)"
-+ 
-+-#: ../arp.c:484
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr "%s (%s) aadressil "
-+ 
-+-#: ../arp.c:490
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr "<mittetäielik>"
-+ 
-+-#: ../arp.c:496
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr "võrgumask %s "
-+ 
-+-#: ../arp.c:513
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr "liides %s\n"
-+ 
-+-#: ../arp.c:592
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr "ARP kirjeid kokku: %s\tignoreerisin: %d\tleidsin: %d\n"
-+ 
-+-#: ../arp.c:596
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr "%s (%s) -- pole kirjet\n"
-+ 
-+-#: ../arp.c:598
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+ msgstr "arp: ei leidnud %d kirje hulgast sobivat\n"
-+ 
-+-#: ../arp.c:613
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+@@ -116,47 +129,45 @@ msgstr ""
-+ "ARP cache vaatamine:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hosti nimi>]\n"
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:627
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+ msgstr ""
-+ "ARP kirje kustutamine:\n"
-+ "  arp [-v]          [-i <if>] -d  <hosti nimi> [pub] [nopub]\n"
-+ 
-+-#: ../arp.c:615
-++#: ../arp.c:628
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+ msgstr ""
-+ "ARP kirjete lisamine failist:\n"
-+ "  arp [-vnD] [<HW>] [-i <if>] -f  [<failinimi>]\n"
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:629
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+ msgstr ""
-+ "ARP kirje lisamine:\n"
-+ "  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [temp] [nopub]\n"
-+ 
-+-#: ../arp.c:617
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [netmask <nm>] pub\n"
-+-
-+-#: ../arp.c:618
-++#: ../arp.c:630
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+ msgstr ""
-+ "  arp [-v]   [<HW>] [-i <if>] -Ds <hosti nimi> <if> [netmask <nm>] pub\n"
-+ "\n"
-+ 
-+-#: ../arp.c:620
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+@@ -164,122 +175,132 @@ msgstr ""
-+ "        -a                       näita kõiki hoste alternatiivsel (BSD) "
-+ "kujul\n"
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr "        -s, --set                uue ARP kirje seadmine\n"
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr "        -d, --delete             määratud kirje kustutamine\n"
-+ 
-+-#: ../arp.c:623 ../netstat.c:1485 ../route.c:85
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr "        -v, --verbose            jutukas väljund\n"
-+ 
-+-#: ../arp.c:624
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, c-format
-+ msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr "        -n, --numeric            mitte lahendada nimesid\n"
-+ 
-+-#: ../arp.c:625
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+ msgstr ""
-+ "        -i, --device             võrguliidese täpsustamine (näiteks eth0)\n"
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+ msgstr "        -D, --use-device         lugeda <hwaddr> vastavalt liideselt\n"
-+ 
-+-#: ../arp.c:627
-++#: ../arp.c:639
-++#, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr "        -A, -p, --protocol       protokollipere määramine\n"
-+ 
-+-#: ../arp.c:628
-++#: ../arp.c:640
-++#, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+-"        -f, --file               lugeda kirjed antud failist või "
-+-"/etc/ethers'st\n"
-++"        -f, --file               lugeda kirjed antud failist või /etc/"
-++"ethers'st\n"
-+ "\n"
-+ 
-+-#: ../arp.c:630 ../rarp.c:181
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+ msgstr ""
-+ "  <HW>=kasutage '-H <hw>' riistvaralise aadressi määramiseks.\n"
-+ "       Vaikimisi: %s\n"
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr "  Võimalike ARP-i toetavate riistvara tüüpide nimekiri:\n"
-+ 
-+-#: ../arp.c:664 ../arp.c:749
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr "arp: riistvara tüüpi %s ei toetata\n"
-+ 
-+-#: ../arp.c:668
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr "arp: aadressiperekonda %s ei toetata\n"
-+ 
-+-#: ../arp.c:703
-++#: ../arp.c:716
-++#, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr "arp: -N toetust pole veel\n"
-+ 
-+-#: ../arp.c:713
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr "arp: tundmatu aadressiperekond %s\n"
-+ 
-+-#: ../arp.c:722
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr "arp: tundmatu riistvara tüüp %s\n"
-+ 
-+-#: ../arp.c:741
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+ msgstr "arp: tuumas on ainult 'inet' aadressiperekonna toetus\n"
-+ 
-+-#: ../arp.c:754
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr "arp: riistvara tüübil %s pole ARP toetust\n"
-+ 
-+-#: ../hostname.c:69
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+ msgstr "Sean sõlme nimeks `%s'\n"
-+ 
-+-#: ../hostname.c:74
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr "%s: ainult root saab sõlme nime muuta\n"
-+ 
-+-#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr "%s: nimi on liiga pikk\n"
-+ 
-+-#: ../hostname.c:89
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+ msgstr "Sean hosti nimeks `%s'\n"
-+ 
-+-#: ../hostname.c:94
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+ msgstr "%s: ainult root saab hosti nime muuta\n"
-+ 
-+-#: ../hostname.c:108
-++#: ../hostname.c:109
-+ #, c-format
-+ msgid "Setting domainname to `%s'\n"
-+ msgstr "Sean domeeni nimeks `%s'\n"
-+ 
-+-#: ../hostname.c:113
-++#: ../hostname.c:114
-+ #, c-format
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr "%s: ainult root saab domeeni nime muuta\n"
-+@@ -304,25 +325,28 @@ msgstr "Tulemus: h_aliases=`%s'\n"
-+ msgid "Result: h_addr_list=`%s'\n"
-+ msgstr "Tulemus: h_addr_list=`%s'\n"
-+ 
-+-#: ../hostname.c:209
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+ msgstr "%s: ei saa avada faili `%s'\n"
-+ 
-+-#: ../hostname.c:223
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+ msgstr ""
-+ "Kasutamine:\n"
-+ "  hostname [-v] {hosti nimi|-F fail}         hosti nime seadmine (ka "
-+ "failist)\n"
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+ msgstr ""
-+ "  domainname [-v] {nisdomeen|-F fail}        NIS domeeni nime seadmine\n"
-+ 
-+-#: ../hostname.c:226
-++#: ../hostname.c:225
-++#, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+@@ -330,18 +354,21 @@ msgstr ""
-+ "  nodename [-v] {nodename|-F fail}           DECneti võrgusõlme nime "
-+ "seadmine\n"
-+ 
-+-#: ../hostname.c:228
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr ""
-+ "  hostname [-v] [-d|-f|-s|-a|-i|-y|-n]       nime näitamine antud formaadis\n"
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+ msgstr "  hostname [-v]                              hosti nime näitamine\n"
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+@@ -350,7 +377,8 @@ msgstr ""
-+ "  hostname -h|--help                         seesama abiinfo\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+@@ -358,36 +386,44 @@ msgstr ""
-+ "  dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr "    -s, --short           lühike hosti nimi\n"
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr "     -a, --alias          alias-nimed\n"
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr "    -i, --ip-address      hosti IP aadressid\n"
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr ""
-+ "    -f, --fqdn, --long    pikk hosti nimi (FQDN - täielik süsteeminimi)\n"
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+ msgstr "    -d, --domain          DNS domeeni nimi\n"
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+ msgstr "    -y, --yp, --nis       NIS/YP domeeni nimi\n"
-+ 
-+-#: ../hostname.c:239
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+ msgstr "    -n, --node            DECneti võrgusõlme nimi\n"
-+ 
-+-#: ../hostname.c:241
-++#: ../hostname.c:240
-++#, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+@@ -395,7 +431,8 @@ msgstr ""
-+ "    -F, --file            lugeda hosti või NIS domeeni nimi failist\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:243
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -415,6 +452,7 @@ msgid "%s: You can't change the DNS doma
-+ msgstr "%s: selle käsuga ei saa muuta DNS domeeni nime\n"
-+ 
-+ #: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+@@ -423,6 +461,7 @@ msgstr ""
-+ "Kui Te EI kasuta bind'i ega NIS'i nimede lahendamiseks, saate DNS domeeni\n"
-+ 
-+ #: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr "(mis on täieliku nime osa) nime muuta failist /etc/hosts.\n"
-+ 
-+@@ -441,76 +480,97 @@ msgstr "getdomainname()=`%s'\n"
-+ msgid "getnodename()=`%s'\n"
-+ msgstr "getnodename()=`%s'\n"
-+ 
-+-#: ../ifconfig.c:110
-++#: ../ifconfig.c:107
-++#, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+-"Liides  MTU Meetr. RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Liides  MTU Meetr RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Lip\n"
-+ 
-+-#: ../ifconfig.c:132 ../ifconfig.c:164
-+-#, c-format
-+-msgid "%s: unknown interface: %s\n"
-+-msgstr "ifconfig: tundmatu liides %s: %s\n"
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, fuzzy, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr "%s: viga liidese info küsimisel: %s\n"
-+ 
-+-#: ../ifconfig.c:156 ../ifconfig.c:740 ../ifconfig.c:831 ../ifconfig.c:937
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-++#, c-format
-+ msgid "No support for INET on this system.\n"
-+ msgstr "Antud süsteem ei toeta INET aadressiperekonda\n"
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:193
-++#, fuzzy, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr "%s: viga liidese info küsimisel: %s\n"
-++
-++#: ../ifconfig.c:202
-++#, fuzzy, c-format
-+ msgid ""
-+ "Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-+ msgstr ""
-+ "Kasutamine:\n"
-+ "  ifconfig [-a] [-i] [-v] [-s] <liides> [[<AF>] <aadress>]\n"
-+ 
-+-#: ../ifconfig.c:181
-++#: ../ifconfig.c:204
-++#, c-format
-+ msgid "  [add <address>[/<prefixlen>]]\n"
-+ msgstr "  [add <aadress>[/<prefiksi pikkus>]]\n"
-+ 
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:205
-++#, c-format
-+ msgid "  [del <address>[/<prefixlen>]]\n"
-+ msgstr "  [del <aadress>[/<prefiksi pikkus>]]\n"
-+ 
-+-#: ../ifconfig.c:183
-++#: ../ifconfig.c:206
-++#, c-format
-+ msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+ msgstr "  [[-]broadcast [<aadress>]]  [[-]pointopoint [<aadress>]]\n"
-+ 
-+-#: ../ifconfig.c:184
-++#: ../ifconfig.c:207
-++#, c-format
-+ msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+ msgstr "  [netmask <aadress>]  [dstaddr <aadress>]  [tunnel <aadress>]\n"
-+ 
-+-#: ../ifconfig.c:187
-++#: ../ifconfig.c:210
-++#, c-format
-+ msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+ msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+ 
-+-#: ../ifconfig.c:189
-++#: ../ifconfig.c:212
-++#, c-format
-+ msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+ msgstr "  [hw <HW> <aadress>]  [metric <NN>]  [mtu <NN>]\n"
-+ 
-+-#: ../ifconfig.c:190
-++#: ../ifconfig.c:213
-++#, c-format
-+ msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ 
-+-#: ../ifconfig.c:191
-++#: ../ifconfig.c:214
-++#, c-format
-+ msgid "  [multicast]  [[-]promisc]\n"
-+ msgstr "  [multicast]  [[-]promisc]\n"
-+ 
-+-#: ../ifconfig.c:192
-++#: ../ifconfig.c:215
-++#, c-format
-+ msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+ msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <tüüp>]\n"
-+ 
-+-#: ../ifconfig.c:194
-++#: ../ifconfig.c:217
-++#, c-format
-+ msgid "  [txqueuelen <NN>]\n"
-+ msgstr "  [txqueuelen <NN>]\n"
-+ 
-+-#: ../ifconfig.c:197
-++#: ../ifconfig.c:220
-++#, c-format
-+ msgid "  [[-]dynamic]\n"
-+ msgstr "  [[-]dynamic]\n"
-+ 
-+-#: ../ifconfig.c:199
-++#: ../ifconfig.c:222
-++#, c-format
-+ msgid ""
-+ "  [up|down] ...\n"
-+ "\n"
-+@@ -518,73 +578,134 @@ msgstr ""
-+ "  [up|down] ...\n"
-+ "\n"
-+ 
-+-#: ../ifconfig.c:201
-++#: ../ifconfig.c:224
-++#, c-format
-+ msgid "  <HW>=Hardware Type.\n"
-+ msgstr "  <HW>=riistvara tüüp\n"
-+ 
-+-#: ../ifconfig.c:202
-++#: ../ifconfig.c:225
-++#, c-format
-+ msgid "  List of possible hardware types:\n"
-+ msgstr "  Võimalike riistvara tüüpide nimekiri:\n"
-+ 
-+ #. 1 = ARPable
-+-#: ../ifconfig.c:204
-++#: ../ifconfig.c:227
-+ #, c-format
-+ msgid "  <AF>=Address family. Default: %s\n"
-+ msgstr "  <AF>=aadressiperekond, vaikimisi %s\n"
-+ 
-+-#: ../ifconfig.c:205
-++#: ../ifconfig.c:228
-++#, c-format
-+ msgid "  List of possible address families:\n"
-+ msgstr "  Võimalike aadressiperekondade nimekiri:\n"
-+ 
-+-#: ../ifconfig.c:361
-++#: ../ifconfig.c:303
-++#, c-format
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:380
-++#, c-format
-+ msgid "Unknown media type.\n"
-+ msgstr "Tundmatu meedia tüüp\n"
-+ 
-+-#: ../ifconfig.c:653
-++#: ../ifconfig.c:417
-++#, c-format
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:429
-++#, c-format
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:441
-++#, c-format
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:465
-++#, c-format
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:523
-++#, c-format
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:652
-++#, c-format
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-++
-++#: ../ifconfig.c:684
-+ #, c-format
-+ msgid "hw address type `%s' has no handler to set address. failed.\n"
-+ msgstr ""
-+ "riistvara aadressi tüübil `%s' pole käsitlejat aadressi seadmiseks - ebaõnn\n"
-+ 
-+-#: ../ifconfig.c:662
-++#: ../ifconfig.c:693
-+ #, c-format
-+ msgid "%s: invalid %s address.\n"
-+ msgstr "%s: vigane %s aadress\n"
-+ 
-+-#: ../ifconfig.c:706 ../ifconfig.c:796 ../ifconfig.c:882
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-++#, c-format
-+ msgid "No support for INET6 on this system.\n"
-+ msgstr "Antud süsteem ei toeta INET6 aadressiperekonda\n"
-+ 
-+-#: ../ifconfig.c:749 ../ifconfig.c:840
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-+ #, c-format
-+ msgid "Interface %s not initialized\n"
-+ msgstr "Liides %s pole initsialiseeritud\n"
-+ 
-+-#: ../ifconfig.c:761 ../ifconfig.c:851
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, c-format
-+ msgid "Bad address.\n"
-+ msgstr "Vigane aadress\n"
-+ 
-+-#: ../ifconfig.c:854
-++#: ../ifconfig.c:885
-++#, c-format
-+ msgid "Address deletion not supported on this system.\n"
-+ msgstr "Antud süsteem ei toeta aadresside kustutamist\n"
-+ 
-+-#: ../ifconfig.c:947
-++#: ../ifconfig.c:957
-++#, fuzzy, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "Ei oska seada aadresse aadressiperekonna %d jaoks\n"
-++
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr "Antud süsteem ei toeta ECONET aadressiperekonda\n"
-+ 
-+-#: ../ifconfig.c:955
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr "Ei oska seada aadresse aadressiperekonna %d jaoks\n"
-+ 
-+-#: ../netstat.c:429
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+ msgstr ""
-+ "(\"-p\" jaoks ei saanud infot lugeda: geteuid()=%d, aga vaja oleks root'u)\n"
-+ 
-+-#: ../netstat.c:433
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+@@ -592,210 +713,223 @@ msgstr ""
-+ "(Mõnesid protsesse ei saanud identifitseerida, teiste kasutajate\n"
-+ "info lugemiseks peab olema root)\n"
-+ 
-+-#: ../netstat.c:440 ../netstat.c:1171 ../netstat.c:1248
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr "LISTENING"
-+ 
-+-#: ../netstat.c:441
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr "CONN SENT"
-+ 
-+-#: ../netstat.c:442 ../netstat.c:1250
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr "DISC SENT"
-+ 
-+-#: ../netstat.c:443 ../netstat.c:510 ../netstat.c:889 ../netstat.c:1251
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr "ESTABLISHED"
-+ 
-+-#: ../netstat.c:465
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr "Aktiivsed NET/ROM soklid\n"
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+ "Kasutaja   Sihtpunkt  Lähtepunkt Liides  Olek         Vr/Vs    SaatJrk "
-+ "VvJrk\n"
-+ 
-+-#: ../netstat.c:476 ../netstat.c:1290
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr "Probleem andmete lugemisel failist %s\n"
-+ 
-+-#: ../netstat.c:511
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr "SYN_SENT"
-+ 
-+-#: ../netstat.c:512
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr "SYN_RECV"
-+ 
-+-#: ../netstat.c:513
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr "FIN_WAIT1"
-+ 
-+-#: ../netstat.c:514
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr "FIN_WAIT2"
-+ 
-+-#: ../netstat.c:515
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr "TIME_WAIT"
-+ 
-+-#: ../netstat.c:516
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr "CLOSE"
-+ 
-+-#: ../netstat.c:517
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr "CLOSE_WAIT"
-+ 
-+-#: ../netstat.c:518
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr "LAST_ACK"
-+ 
-+-#: ../netstat.c:519
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr "LISTEN"
-+ 
-+-#: ../netstat.c:520
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr "CLOSING"
-+ 
-+-#: ../netstat.c:587
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr "Hoiatus - sain imeliku igmp6 rea (nr. %d)\n"
-+ 
-+-#: ../netstat.c:592 ../netstat.c:630 ../netstat.c:751 ../netstat.c:883
-+-#: ../netstat.c:1014 ../netstat.c:1019
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr "netstat: aadressiperekonda %d ei toetata\n"
-+ 
-+-#: ../netstat.c:605 ../netstat.c:610 ../netstat.c:618 ../netstat.c:625
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr "Hoiatus - sain imeliku igmp rea (nr. %d)\n"
-+ 
-+-#: ../netstat.c:668
-++#: ../netstat.c:677
-++#, c-format
-+ msgid "Active X.25 sockets\n"
-+ msgstr "Aktiivsed X.25 soklid\n"
-+ 
-+ #. IMHO, Vr/Vs is not very usefull --SF
-+-#: ../netstat.c:670
-++#: ../netstat.c:679
-++#, c-format
-+ msgid ""
-+-"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  "
-+-"Recv-Q\n"
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+ "Sihtpunkt    Lähtepunkt      Liides  LCI  Olek         Vr/Vs  SaatJrk VvJrk\n"
-+ 
-+-#: ../netstat.c:747
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr "Hoiatus - sain imeliku tcp rea\n"
-+ 
-+-#: ../netstat.c:788 ../netstat.c:938 ../netstat.c:1057
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr "eikäi ((0.00/%ld/%d)"
-+ 
-+-#: ../netstat.c:792
-++#: ../netstat.c:804
-+ #, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr "käib (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:797
-++#: ../netstat.c:809
-+ #, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr "keepalive (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:802
-++#: ../netstat.c:814
-+ #, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr "timewait (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:807 ../netstat.c:947 ../netstat.c:1067
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr "eitea-%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:879
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr "Hoiatus - sain imeliku udp rea\n"
-+ 
-+-#: ../netstat.c:897 ../netstat.c:1157 ../netstat.c:1190
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr "TUNDMATU"
-+ 
-+-#: ../netstat.c:943 ../netstat.c:1062
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr "käib-%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:1028
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr "Hoiatus - sain imeliku raw rea\n"
-+ 
-+-#: ../netstat.c:1110
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr "Hoiatus - sain imeliku unix rea\n"
-+ 
-+-#: ../netstat.c:1137
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr "STREAM"
-+ 
-+-#: ../netstat.c:1141
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr "DGRAM"
-+ 
-+-#: ../netstat.c:1145
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr "RAW"
-+ 
-+-#: ../netstat.c:1149
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr "RDM"
-+ 
-+-#: ../netstat.c:1153
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+ msgstr "SEQPACKET"
-+ 
-+-#: ../netstat.c:1162
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr "VABA"
-+ 
-+-#: ../netstat.c:1178
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr "ÜHENDUMAS"
-+ 
-+-#: ../netstat.c:1182
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr "ÜHENDATUD"
-+ 
-+-#: ../netstat.c:1186
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr "LAHTIÜHENDUMAS"
-+ 
-+-#: ../netstat.c:1217
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+ msgstr "Aktiivsed UNIX domeeni soklid "
-+ 
-+-#: ../netstat.c:1219 ../netstat.c:1729
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr "(serverid ja ühendatud)"
-+ 
-+-#: ../netstat.c:1222 ../netstat.c:1732
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr "(ainult serverid)"
-+ 
-+-#: ../netstat.c:1224 ../netstat.c:1734
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr "(ilma serveriteta)"
-+ 
-+-#: ../netstat.c:1227
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+@@ -803,32 +937,36 @@ msgstr ""
-+ "\n"
-+ "Proto Mitu   Lipud       Tüüp       Olek         I-kirje "
-+ 
-+-#: ../netstat.c:1229
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr "Tee\n"
-+ 
-+-#: ../netstat.c:1249
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr "SABM SENT"
-+ 
-+-#: ../netstat.c:1252
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr "RECOVERY"
-+ 
-+-#: ../netstat.c:1266
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr "Aktiivsed AX.25 soklid\n"
-+ 
-+-#: ../netstat.c:1267
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr "Sihtpunkt  Lähtepunkt Liides  Olek         Vr/Vs    SaatJrk VvJrk\n"
-+ 
-+-#: ../netstat.c:1310
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr "Probleem andmete lugemisel failist %s\n"
-+ 
-+-#: ../netstat.c:1361
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+@@ -838,47 +976,53 @@ msgstr ""
-+ "Proto VvJrk  SaatJrk Kohalik aadress           Väline aadress             "
-+ "Olek "
-+ 
-+-#: ../netstat.c:1363
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr " Kasutaja"
-+ 
-+-#: ../netstat.c:1397
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr "ESTAB"
-+ 
-+-#: ../netstat.c:1405
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr "UNK."
-+ 
-+-#: ../netstat.c:1443
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+ msgstr "Tuuma liideste tabel\n"
-+ 
-+-#: ../netstat.c:1447
-++#: ../netstat.c:1465
-++#, fuzzy, c-format
-+ msgid ""
-+-"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+-"Liides  MTU Meetr RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Liides  MTU Meetr. RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Lip\n"
-+ 
-+-#: ../netstat.c:1451
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+ msgstr "Puudulik informatsioon liideste kohta"
-+ 
-+-#: ../netstat.c:1474
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+ "Kasutamine: netstat [-veenNcCF] [<Af>] -r\n"
-+ "            netstat {-V|--version|-h|--help}\n"
-+ 
-+-#: ../netstat.c:1475
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr "            netstat [-vnNcaeol] [<Sokkel> ...]\n"
-+ 
-+-#: ../netstat.c:1476
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+@@ -886,25 +1030,30 @@ msgstr ""
-+ "            netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1478
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr "        -r, --route              ruutingutabeli näitamine\n"
-+ 
-+-#: ../netstat.c:1479
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr "        -i, --interfaces         liideste tabeli näitamine\n"
-+ 
-+-#: ../netstat.c:1480
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr "        -g, --groups             multiedastuse gruppide näitamine\n"
-+ 
-+-#: ../netstat.c:1481
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+ msgstr ""
-+ "        -s, --statistics         võrgu statistika näitamine (SNMP stiilis)\n"
-+ 
-+-#: ../netstat.c:1483
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+@@ -912,36 +1061,39 @@ msgstr ""
-+ "        -M, --masquerade         maskeeritavate ühenduste näitamine\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1486 ../route.c:86
-+-msgid "        -n, --numeric            dont resolve names\n"
-+-msgstr "        -n, --numeric            mitte lahendada numbreid nimedeks\n"
-+-
-+-#: ../netstat.c:1487
-+-msgid "        --numeric-hosts          dont resolve host names\n"
-++#: ../netstat.c:1505
-++#, fuzzy, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-+ msgstr "        --numeric-hosts          mitte lahendada hostinimesid\n"
-+ 
-+-#: ../netstat.c:1488
-+-msgid "        --numeric-ports          dont resolve port names\n"
-++#: ../netstat.c:1506
-++#, fuzzy, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-+ msgstr "        --numeric-ports          mitte lahendada pordinimesid\n"
-+ 
-+-#: ../netstat.c:1489
-+-msgid "        --numeric-users          dont resolve user names\n"
-++#: ../netstat.c:1507
-++#, fuzzy, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-+ msgstr "        --numeric-users          mitte lahendada kasutajanimesid\n"
-+ 
-+-#: ../netstat.c:1490
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr "        -N, --symbolic           lahendada riistvara aadressid\n"
-+ 
-+-#: ../netstat.c:1491 ../route.c:87
-++#: ../netstat.c:1509 ../route.c:88
-++#, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+ msgstr "        -e, --extend             muu info/lisainfo näitamine\n"
-+ 
-+-#: ../netstat.c:1492
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+ msgstr ""
-+ "        -p, --programs           soklite kohta PID/protsessi nime näitamine\n"
-+ 
-+-#: ../netstat.c:1493
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+@@ -949,22 +1101,26 @@ msgstr ""
-+ "        -c, --continuous         pidevalt uuenev nimekiri\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1494
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+ msgstr "        -l, --listening          kuulavate serversoklite näitamine\n"
-+ 
-+-#: ../netstat.c:1495
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+ msgstr ""
-+ "        -a, --all, --listening   kõigi soklite näitamine (vaikimisi "
-+ "ühendatud)\n"
-+ 
-+-#: ../netstat.c:1496
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr "        -o, --timers             taimerite näitamine\n"
-+ 
-+-#: ../netstat.c:1497 ../route.c:88
-++#: ../netstat.c:1515 ../route.c:89
-++#, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+@@ -972,7 +1128,8 @@ msgstr ""
-+ "        -F, --fib                üldiste ruutingutabelite näitamine "
-+ "(vaikimisi)\n"
-+ 
-+-#: ../netstat.c:1498 ../route.c:89
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+@@ -981,108 +1138,121 @@ msgstr ""
-+ "näitamine\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1500
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+-"  <Sokkel>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Sokkel>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ 
-+-#: ../netstat.c:1501 ../route.c:91
-+-#, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-++#: ../netstat.c:1519
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr "  <AF>=kasutage '-A <af>' või '--<af>' vaikimisi: %s\n"
-+ 
-+-#: ../netstat.c:1502 ../route.c:92
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+ msgstr "  Võimalike ruutingu toetavate aadressiperekondade nimekiri:\n"
-+ 
-+-#: ../netstat.c:1726
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr "Aktiivsed internetiühendused "
-+ 
-+-#: ../netstat.c:1736
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ "\n"
-+-"Proto  VvJrk SaatJrk Kohalik aadress        Väline aadress          Olek     "
-+-"  "
-++"Proto  VvJrk SaatJrk Kohalik aadress        Väline aadress          "
-++"Olek       "
-+ 
-+-#: ../netstat.c:1738
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr " Kasutaja   I-kirje   "
-+ 
-+-#: ../netstat.c:1741
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr " Taimer"
-+ 
-+-#: ../netstat.c:1771
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+ msgstr "IPv4 grupikuuluvused\n"
-+ 
-+-#: ../netstat.c:1772
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr "Liides          Mitu   Grupp\n"
-+ 
-+-#: ../rarp.c:43
-++#: ../rarp.c:44
-+ msgid "This kernel does not support RARP.\n"
-+ msgstr "rarp: tuum ei toeta RARP'i\n"
-+ 
-+-#: ../rarp.c:82
-++#: ../rarp.c:83
-+ #, c-format
-+ msgid "no RARP entry for %s.\n"
-+ msgstr "rarp: %s jaoks pole RARP kirjet\n"
-+ 
-+-#: ../rarp.c:95
-++#: ../rarp.c:96
-+ #, c-format
-+ msgid "%s: bad hardware address\n"
-+ msgstr "rarp: vigane riistvaraline aadress %s\n"
-+ 
-+-#: ../rarp.c:127
-++#: ../rarp.c:128
-+ #, c-format
-+ msgid "rarp: cannot open file %s:%s.\n"
-+ msgstr "rarp: ei saa avada faili %s:%s\n"
-+ 
-+-#: ../rarp.c:139
-++#: ../rarp.c:140
-+ #, c-format
-+ msgid "rarp: format error at %s:%u\n"
-+ msgstr "rarp: vorminguviga failis %s real %u\n"
-+ 
-+-#: ../rarp.c:143 ../rarp.c:287
-++#: ../rarp.c:144 ../rarp.c:289
-+ #, c-format
-+ msgid "rarp: %s: unknown host\n"
-+ msgstr "rarp: tundmatu host %s\n"
-+ 
-+-#: ../rarp.c:146
-++#: ../rarp.c:147
-+ #, c-format
-+ msgid "rarp: cannot set entry from %s:%u\n"
-+ msgstr "rarp: ei saa kehtestada kirjet failist %s realt %u\n"
-+ 
-+-#: ../rarp.c:175
-++#: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+ msgstr ""
-+ "Kasutamine:\n"
-+ "  rarp -a                              puhvris olevate kirjete vaatamine\n"
-+ 
-+-#: ../rarp.c:176
-++#: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+ msgstr "  rarp -d <hosti nimi>                 kirje kustutamine puhvrist\n"
-+ 
-+-#: ../rarp.c:177
-++#: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+ msgstr "  rarp [<HW>] -s <hosti nimi> <hwaddr> kirje lisamine puhvrisse\n"
-+ 
-+-#: ../rarp.c:178
-++#: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+ msgstr ""
-+ "  rarp -f                              kirjete lisamine failist /etc/ethers\n"
-+ 
-+-#: ../rarp.c:179
-++#: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+@@ -1090,24 +1260,26 @@ msgstr ""
-+ "  rarp -V                              programmi versiooni näitamine\n"
-+ "\n"
-+ 
-+-#: ../rarp.c:236
-++#: ../rarp.c:238
-+ #, c-format
-+ msgid "%s: illegal option mix.\n"
-+ msgstr "%s: lubamatu võtmete kombinatsioon\n"
-+ 
-+-#: ../rarp.c:267
-++#: ../rarp.c:269
-+ #, c-format
-+ msgid "rarp: %s: unknown hardware type.\n"
-+ msgstr "rarp: tundmatu riistvara tüüp %s\n"
-+ 
-+-#: ../route.c:79
-++#: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+ "Kasutamine:\n"
-+ "    route [-nNvee] [-FC] [<AF>]           Tuuma ruutingutabeli näitamine\n"
-+ 
-+-#: ../route.c:80
-++#: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+@@ -1115,7 +1287,8 @@ msgstr ""
-+ "    route [-v] [-FC] {add|del|flush} ...  Tuuma ruutingutabeli muutmine\n"
-+ "\n"
-+ 
-+-#: ../route.c:82
-++#: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+@@ -1123,7 +1296,8 @@ msgstr ""
-+ "    route {-h|--help} [<AF>]              Detailne süntaks perekonna AF "
-+ "jaoks\n"
-+ 
-+-#: ../route.c:83
-++#: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+@@ -1132,15 +1306,23 @@ msgstr ""
-+ "    route {-V|--version}                  Versiooni ja oskuste näitamine\n"
-+ "\n"
-+ 
-++#: ../route.c:92
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>=kasutage '-A <af>' või '--<af>' vaikimisi: %s\n"
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr "Kasutamine:  plipconfig [-a] [-i] [-v] liides\n"
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr "                        [nibble NN] [trigger NN]\n"
-+ 
-+ #: ../plipconfig.c:68
-++#, c-format
-+ msgid "       plipconfig -V | --version\n"
-+ msgstr "             plipconfig -V | --version\n"
-+ 
-+@@ -1149,25 +1331,30 @@ msgstr "             plipconfig -V | --v
-+ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr "%s\tnibble %lu  trigger %lu\n"
-+ 
-+-#: ../iptunnel.c:84
-++#: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr "Kasutamine: iptunnel { add | change | del | show } [ NIMI ]\n"
-+ 
-+-#: ../iptunnel.c:85
-++#: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+ msgstr ""
-+ "             [ mode { ipip | gre | sit } ] [ remote AADR ] [ local AADR ]\n"
-+ 
-+-#: ../iptunnel.c:86
-++#: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr "             [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ 
-+-#: ../iptunnel.c:87
-++#: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+ msgstr "             [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev LIIDES ]\n"
-+ 
-+-#: ../iptunnel.c:88
-++#: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+@@ -1175,83 +1362,99 @@ msgstr ""
-+ "             iptunnel -V | --version\n"
-+ "\n"
-+ 
-+-#: ../iptunnel.c:89
-++#: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr "Kus:   NIMI := STRING\n"
-+ 
-+-#: ../iptunnel.c:90
-++#: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr "       AADR := { IP_AADRESS | any }\n"
-+ 
-+-#: ../iptunnel.c:91
-++#: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr "       TOS  := { ARV | inherit }\n"
-+ 
-+-#: ../iptunnel.c:92
-++#: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr "       TTL  := { 1..255 | inherit }\n"
-+ 
-+-#: ../iptunnel.c:93
-++#: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr ""
-+ "       KEY  := { PUNKTIDEGA_ARVUNELIK | ARV }\n"
-+ "       LIIDES := FÜÜSILISE_LIIDESE_NIMI\n"
-+ 
-+-#: ../iptunnel.c:331
-++#: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr "ipip ja sit juures ei ole võtmed lubatud\n"
-+ 
-+-#: ../iptunnel.c:351
-++#: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr "Leviedastusega tunnel vajab lähteaadressi\n"
-+ 
-+-#: ../iptunnel.c:366
-++#: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr "ttl != 0 ning noptmudisc ei sobi kokku\n"
-+ 
-+-#: ../iptunnel.c:378
-++#: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr "Ei suuda määrata tunneli moodi (ipip, gre või sit)\n"
-+ 
-+-#: ../iptunnel.c:416
-++#: ../iptunnel.c:417
-+ #, c-format
-+ msgid "%s: %s/ip  remote %s  local %s "
-+ msgstr "%s: %s/ip teises otsas %s  siin %s "
-+ 
-+-#: ../iptunnel.c:420
-++#: ../iptunnel.c:421
-+ msgid "unknown"
-+ msgstr "tundmatu"
-+ 
-+-#: ../iptunnel.c:452
-++#: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr "  Järjekorravälised paketid visatakse minema\n"
-+ 
-+-#: ../iptunnel.c:454
-++#: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr "  Vastuvõetavates pakettides on kontrollsumma kohustuslik\n"
-+ 
-+-#: ../iptunnel.c:456
-++#: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr "  Väljuvad paketid varustatakse järjekorranumbritega\n"
-+ 
-+-#: ../iptunnel.c:458
-++#: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr "  Väljuvad paketid varustatakse kontrollsummaga\n"
-+ 
-+-#: ../iptunnel.c:486
-++#: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+ msgstr "/proc/net/dev on vales formaadis. Vale tuuma versioon?\n"
-+ 
-+-#: ../iptunnel.c:499
-++#: ../iptunnel.c:500
-+ #, c-format
-+ msgid "Failed to get type of [%s]\n"
-+ msgstr "Ei suutnud kindlaks teha liidese %s tüüpi\n"
-+ 
-+-#: ../iptunnel.c:515
-++#: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr "RX: Pakette    Baite        Vigu   KSumVigu JrkVigu  Levipakette\n"
-+ 
-+-#: ../iptunnel.c:518
-++#: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr "TX: Pakette    Baite        Vigu   DeadLoop EiRuudi  MäluOtsas\n"
-+ 
-+@@ -1658,13 +1861,13 @@ msgid "%u packets directly queued to rec
-+ msgstr "%u paketti pandi otse recvmsg eeljärjekorda"
-+ 
-+ #: ../statistics.c:178
-+-#, c-format
-+-msgid "%u packets directly received from backlog"
-++#, fuzzy, c-format
-++msgid "%u of bytes directly received from backlog"
-+ msgstr "%u paketti võeti vastu otse backlog-ist"
-+ 
-+ #: ../statistics.c:180
-+-#, c-format
-+-msgid "%u packets directly received from prequeue"
-++#, fuzzy, c-format
-++msgid "%u of bytes directly received from prequeue"
-+ msgstr "%u paketti võeti vastu otse eeljärjekorrast"
-+ 
-+ #: ../statistics.c:182
-+@@ -1673,8 +1876,8 @@ msgid "%u packets dropped from prequeue"
-+ msgstr "%u paketti kustutati eeljärjekorrast"
-+ 
-+ #: ../statistics.c:183
-+-#, c-format
-+-msgid "%u packets header predicted"
-++#, fuzzy, c-format
-++msgid "%u packet headers predicted"
-+ msgstr "%u paketti päise õige ennustusega"
-+ 
-+ #: ../statistics.c:184
-+@@ -1687,19 +1890,210 @@ msgstr "%u paketti päise õige ennustuseg
-+ msgid "Ran %u times out of system memory during packet sending"
-+ msgstr "Pakettide saatmisel sai %u korda süsteemne mälu otsa"
-+ 
-+-#: ../statistics.c:253
-++#: ../statistics.c:188
-++#, fuzzy, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr "%u sisenevat paketti tundmatule pordile"
-++
-++#: ../statistics.c:189
-++#, c-format
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-++
-++#: ../statistics.c:192
-++#, fuzzy, c-format
-++msgid "%u bad SACKs received"
-++msgstr "%u vigast segmenti võeti vastu"
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:197
-++#, fuzzy, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr "%u ühenduse katkestust saabus"
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr ""
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, fuzzy, c-format
-++msgid "%u retransmits lost"
-++msgstr "%u katkestust saadeti"
-++
-++#: ../statistics.c:202
-++#, fuzzy, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr "%u segmenti saadeti uuesti"
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, fuzzy, c-format
-++msgid "%u fast retransmits"
-++msgstr "%u segmenti saadeti uuesti"
-++
-++#: ../statistics.c:206
-++#, fuzzy, c-format
-++msgid "%u forward retransmits"
-++msgstr "%u edastati"
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, fuzzy, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "%u segmenti saadeti uuesti"
-++
-++#: ../statistics.c:210
-++#, fuzzy, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "%u pakettide kokkupanekut ebaõnnestus"
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, fuzzy, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr ""
-++"%u paketti kustutati vastuvõtu järjekorrast sokli puhvri ületäitumise tõttu"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, fuzzy, c-format
-++msgid "%u DSACKs received"
-++msgstr "%u paketti võeti vastu"
-++
-++#: ../statistics.c:216
-++#, fuzzy, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "kokku võeti vastu %u paketti"
-++
-++#: ../statistics.c:217
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "%u ühenduse katkestust saabus"
-++
-++#: ../statistics.c:218
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "%u ühenduse katkestust saabus"
-++
-++#: ../statistics.c:219
-++#, fuzzy, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "%u ühenduse katkestust saabus"
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, fuzzy, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "%u aktiivsest ühendusest keelduti ajatempli tõttu"
-++
-++#: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr "lubatud"
-+ 
-+-#: ../statistics.c:253
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr "keelatud"
-+ 
-+-#: ../statistics.c:336
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr "Viga /proc/net/snmp analüüsimisel"
-+ 
-+-#: ../statistics.c:349
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr "Ei saa avada faili /proc/net/snmp"
-+ 
-+@@ -1713,7 +2107,7 @@ msgstr "Riistvara tüüpi `%s' ei toetata\
-+ msgid "Cannot change line discipline to `%s'.\n"
-+ msgstr "Ei suuda seada `%s' liiniprotokolliks\n"
-+ 
-+-#: ../lib/af.c:153 ../lib/hw.c:156
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr "UNSPEC"
-+ 
-+@@ -1729,11 +2123,11 @@ msgstr "DARPA Internet"
-+ msgid "IPv6"
-+ msgstr "IPv6"
-+ 
-+-#: ../lib/af.c:164 ../lib/hw.c:177
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr "AMPR AX.25"
-+ 
-+-#: ../lib/af.c:167 ../lib/hw.c:183
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr "AMPR NET/ROM"
-+ 
-+@@ -1745,7 +2139,7 @@ msgstr "Novell IPX"
-+ msgid "Appletalk DDP"
-+ msgstr "Appletalk DDP"
-+ 
-+-#: ../lib/af.c:176 ../lib/hw.c:218
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr "Econet"
-+ 
-+@@ -1753,19 +2147,21 @@ msgstr "Econet"
-+ msgid "CCITT X.25"
-+ msgstr "CCITT X.25"
-+ 
-+-#: ../lib/af.c:182 ../lib/hw.c:180
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr "AMPR ROSE"
-+ 
-+-#: ../lib/af.c:185 ../lib/hw.c:168
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr "Ash"
-+ 
-+ #: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr "Meil on kombeks üks aadressiperekond korraga\n"
-+ 
-+ #: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr "Liiga palju aadressiperekonna argumente\n"
-+ 
-+@@ -1790,6 +2186,7 @@ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr "in_arcnet(%s): sodi lõpus\n"
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+ msgstr "Vigane Ash aadress"
-+ 
-+@@ -1808,22 +2205,21 @@ msgid "Callsign too long"
-+ msgstr "Liiga pikk kutsung"
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr "AX.25 pole antud süsteemis konfigureeritud\n"
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr "Tuuma AX.25 ruutingutabel\n"
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr "Sihtpunkt    Liides   Kasutus\n"
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr "`ddp' jaoks ruutingutabelit veel ei oska\n"
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1879,90 +2275,94 @@ msgstr "in_hippi(%s): ignoreerin lõpetav
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr "in_hippi(%s): sodi lõpus\n"
-+ 
-+-#: ../lib/hw.c:155
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr "Kohalik loopback"
-+ 
-+-#: ../lib/hw.c:158
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr "Serial Line IP"
-+ 
-+-#: ../lib/hw.c:159
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr "VJ Serial Line IP"
-+ 
-+-#: ../lib/hw.c:160
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr "6-bitine Serial Line IP"
-+ 
-+-#: ../lib/hw.c:161
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr "VJ 6-bitine Serial Line IP"
-+ 
-+-#: ../lib/hw.c:162
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr "Adaptiivne Serial Line IP"
-+ 
-+-#: ../lib/hw.c:165
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr "Ethernet"
-+ 
-+-#: ../lib/hw.c:171
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr "Fiber Distributed Data Interface"
-+ 
-+-#: ../lib/hw.c:174
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr "HIPPI"
-+ 
-+-#: ../lib/hw.c:186
-++#: ../lib/hw.c:191
-+ msgid "generic X.25"
-+ msgstr "üldine X.25"
-+ 
-+-#: ../lib/hw.c:189
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr "IPIP tunnel"
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+ msgstr "Kakspunktprotokoll"
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr "(Cisco-)HDLC"
-+ 
-+-#: ../lib/hw.c:196
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:199
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr "ARCnet"
-+ 
-+-#: ../lib/hw.c:202
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr "Frame Relay DLCI"
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr "Frame Relay Access Device"
-+ 
-+-#: ../lib/hw.c:206
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr "IPv6-in-IPv4"
-+ 
-+-#: ../lib/hw.c:209
-++#: ../lib/hw.c:214
-+ msgid "IrLAP"
-+ msgstr "IrLAP"
-+ 
-+-#: ../lib/hw.c:212
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr "16/4 Mbps Token Ring"
-+ 
-+-#: ../lib/hw.c:214
-++#: ../lib/hw.c:219
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr "16/4 Mbps Token Ring (New)"
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+@@ -1972,27 +2372,32 @@ msgstr "rresolve: toetuseta aadressipere
-+ msgid "[UNKNOWN]"
-+ msgstr "[TUNDMATU]"
-+ 
-+-#: ../lib/inet6_gr.c:79
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr "INET6 (IPv6) pole antud süsteemis konfigureeritud\n"
-+ 
-+-#: ../lib/inet6_gr.c:82
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+ msgstr "Tuuma IPv6 ruutingutabel\n"
-+ 
-+-#: ../lib/inet6_gr.c:84
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-+ msgstr ""
-+-"Sihtpunkt                                   Järgmine samm                    "
-+-"       Lipud Meetr  Mitu Kasut Liides\n"
-++"Sihtpunkt                                   Järgmine "
-++"samm                           Lipud Meetr  Mitu Kasut Liides\n"
-+ 
-+-#: ../lib/inet6_gr.c:158
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr "Tuuma IPv6 naabrite puhver\n"
-+ 
-+-#: ../lib/inet6_gr.c:161
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+@@ -2000,7 +2405,8 @@ msgstr ""
-+ "Naaber                                      HW Aadress        Liides   Lipud "
-+ "Mitu Olek\n"
-+ 
-+-#: ../lib/inet6_gr.c:165
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+@@ -2009,31 +2415,38 @@ msgstr ""
-+ "Mitu Olek            Stale(sec) Delete(sec)\n"
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr "Kasutamine: route [-vF] del AADRESS\n"
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr ""
-+ "            route [-vF] add AADRESS [gw GW] [metric M] [[dev] LIIDES]\n"
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr "            route [-FC] flush      Seda EI toetata\n"
-+ 
-+ #: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+ msgstr "`inet6' ruutingutabeli tühjendamist ei toetata\n"
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr "INET (IPv4) pole antud süsteemis konfigureeritud\n"
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+ msgstr "Tuuma IP ruutingutabel\n"
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2042,6 +2455,7 @@ msgstr ""
-+ "Liides\n"
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2050,6 +2464,7 @@ msgstr ""
-+ "Liides\n"
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+@@ -2058,10 +2473,12 @@ msgstr ""
-+ "Liides   MSS   Aken   irtt\n"
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+ msgstr "Tuuma IP ruutingu puhver\n"
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2070,6 +2487,7 @@ msgstr ""
-+ "Liides\n"
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2078,6 +2496,7 @@ msgstr ""
-+ "Liides\n"
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+@@ -2086,6 +2505,7 @@ msgstr ""
-+ "Liides   MSS    Aken  irtt  HH  Arp\n"
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+@@ -2093,7 +2513,8 @@ msgstr ""
-+ "Lähtepunkt      Sihtpunkt       Ruuter          Lipud Meetr  Mitu Kasut "
-+ "Liides   MSS   Aken   irtt  TOS HHRef HHUptod     SpecDst\n"
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+@@ -2101,31 +2522,36 @@ msgstr ""
-+ "Kasutamine: route [-vF] del {-host|-net} AADRESS[/PREFIKS] [gw GW] [metric "
-+ "M] [[dev] LIIDES]\n"
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+ msgstr ""
-+ "            route [-vF] add {-host|-net} AADRESS[/PREFIKS] [gw GW] [metric "
-+ "M]\n"
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ "                              [netmask N] [mss MSS] [window W] [irtt I]\n"
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr "                              [mod] [dyn] [reinstate] [[dev] LIIDES]\n"
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+ msgstr ""
-+ "            route [-vF] add {-host|-net} AADRESS[/PREFIKS] [metric M] "
-+ "reject\n"
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr "            route [-FC] flush      Seda EI toetata\n"
-+ 
-+@@ -2135,14 +2561,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr "route: %s: võrku ei saa kasutada ruuterina\n"
-+ 
-+ #: ../lib/inet_sr.c:174
-++#, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr "route: vigane MSS/MTU\n"
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr "route: Vigane akna suurus\n"
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr "route: vigane algne rtt\n"
-+ 
-+@@ -2157,75 +2586,92 @@ msgid "route: bogus netmask %s\n"
-+ msgstr "route: vale võrgumask %s\n"
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr "route: võrgumask ei sobi ruutingu aadressiga\n"
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+ msgstr "`inet' ruutingutabeli tühjendamist ei toetata\n"
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+ msgstr "`inet' ruutingu puhvri muutmist ei toetata\n"
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr "IPX pole antud süsteemis konfigureeritud\n"
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+ msgstr "Tuuma IPX ruutingutabel\n"
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+ msgstr "Sihtpunkt                 Ruuteri võrk              Ruuter ise\n"
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+ msgstr "IPX osa vajab ümbertegemist\n"
-+ 
-+ #: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr "IP maskeerimise kirjed\n"
-+ 
-+ #: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr "Proto  Aegub  Lähtepunkt           Sihtpunkt            Pordid\n"
-+ 
-+ #: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+-"Proto  Aegub     Initseq Delta Prevd Lähtepunkt           Sihtpunkt          "
-+-"  Pordid\n"
-++"Proto  Aegub     Initseq Delta Prevd Lähtepunkt           "
-++"Sihtpunkt            Pordid\n"
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr "NET/ROM pole antud süsteemis konfigureeritud\n"
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+ msgstr "Tuuma NET/ROM ruutingutabel\n"
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr "Sihtpunkt   Mnemoonika Kvaliteet Naaber    Liides\n"
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+ msgstr "netrom kasutus\n"
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+ msgstr "NET/ROM osa vajab ümbertegemist\n"
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr "Sellest programmist ei saa PPP-d käivitada\n"
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+ msgstr "Palun kasutage pppd'd\n"
-+ 
-+@@ -2234,287 +2680,314 @@ msgid "Node address must be ten digits"
-+ msgstr "Sõlme aadress peab olema kümnekohaline"
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr "ROSE pole antud süsteemis konfigureeritud\n"
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+ msgstr "Tuuma ROSE ruutingutabel\n"
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr "in_tr(%s): vigane token ring-aadress\n"
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr "in_tr(%s): ignoreerin lõpetavat koolonit\n"
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr "in_tr(%s): sodi lõpus\n"
-+ 
-+-#: ../lib/interface.c:164
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+ msgstr "Hoiatus: `inet' sokleid ei ole: %s\n"
-+ 
-+-#: ../lib/interface.c:316
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr "Hoiatus: ei saa avada faili %s (%s). Väljund on piiratud.\n"
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:556
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr "Liidest ei leitud"
-+ 
-+-#: ../lib/interface.c:560
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-+ msgstr "%s: viga liidese info küsimisel: %s\n"
-+ 
-+-#: ../lib/interface.c:593
-++#: ../lib/interface.c:608
-+ msgid "     - no statistics available -"
-+ msgstr "     - statistikat ei ole      -"
-+ 
-+-#: ../lib/interface.c:597
-++#: ../lib/interface.c:612
-++#, c-format
-+ msgid "[NO FLAGS]"
-+ msgstr "[LIPPE POLE]"
-+ 
-+-#: ../lib/interface.c:673
-++#: ../lib/interface.c:688
-+ #, c-format
-+ msgid "%-9.9s Link encap:%s  "
-+ msgstr "%-9.9s kapseldus:%s  "
-+ 
-+-#: ../lib/interface.c:678
-++#: ../lib/interface.c:693
-+ #, c-format
-+ msgid "HWaddr %s  "
-+ msgstr "HWaddr %s  "
-+ 
-+-#: ../lib/interface.c:681
-++#: ../lib/interface.c:696
-+ #, c-format
-+ msgid "Media:%s"
-+ msgstr "meedia:%s"
-+ 
-+-#: ../lib/interface.c:683
-++#: ../lib/interface.c:698
-++#, c-format
-+ msgid "(auto)"
-+ msgstr "(auto)"
-+ 
-+-#: ../lib/interface.c:690
-++#: ../lib/interface.c:705
-+ #, c-format
-+ msgid "          %s addr:%s "
-+ msgstr "          %s aadress:%s "
-+ 
-+-#: ../lib/interface.c:693
-++#: ../lib/interface.c:708
-+ #, c-format
-+ msgid " P-t-P:%s "
-+ msgstr " P-t-P:%s "
-+ 
-+-#: ../lib/interface.c:696
-++#: ../lib/interface.c:711
-+ #, c-format
-+ msgid " Bcast:%s "
-+ msgstr " bcast:%s "
-+ 
-+-#: ../lib/interface.c:698
-++#: ../lib/interface.c:713
-+ #, c-format
-+ msgid " Mask:%s\n"
-+ msgstr " mask:%s\n"
-+ 
-+-#: ../lib/interface.c:715
-++#: ../lib/interface.c:730
-+ #, c-format
-+ msgid "          inet6 addr: %s/%d"
-+ msgstr "          inet6 aadr: %s/%d"
-+ 
-+-#: ../lib/interface.c:717
-++#: ../lib/interface.c:732
-++#, c-format
-+ msgid " Scope:"
-+ msgstr " skoop:"
-+ 
-+-#: ../lib/interface.c:720
-++#: ../lib/interface.c:735
-++#, c-format
-+ msgid "Global"
-+ msgstr "globaalne"
-+ 
-+-#: ../lib/interface.c:723
-++#: ../lib/interface.c:738
-++#, c-format
-+ msgid "Link"
-+ msgstr "ühendus"
-+ 
-+-#: ../lib/interface.c:726
-++#: ../lib/interface.c:741
-++#, c-format
-+ msgid "Site"
-+ msgstr "site"
-+ 
-+-#: ../lib/interface.c:729
-++#: ../lib/interface.c:744
-++#, c-format
-+ msgid "Compat"
-+ msgstr "ühilduvus"
-+ 
-+-#: ../lib/interface.c:732
-++#: ../lib/interface.c:747
-++#, c-format
-+ msgid "Host"
-+ msgstr "host"
-+ 
-+-#: ../lib/interface.c:735
-++#: ../lib/interface.c:750
-++#, c-format
-+ msgid "Unknown"
-+ msgstr "tundmatu"
-+ 
-+-#: ../lib/interface.c:750
-++#: ../lib/interface.c:765
-+ #, c-format
-+ msgid "          IPX/Ethernet II addr:%s\n"
-+ msgstr "          IPX/Ethernet II aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:753
-++#: ../lib/interface.c:768
-+ #, c-format
-+ msgid "          IPX/Ethernet SNAP addr:%s\n"
-+ msgstr "          IPX/Ethernet SNAP aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:756
-++#: ../lib/interface.c:771
-+ #, c-format
-+ msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+ msgstr "          IPX/Ethernet 802.2 aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:759
-++#: ../lib/interface.c:774
-+ #, c-format
-+ msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+ msgstr "          IPX/Ethernet 802.3 aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:769
-++#: ../lib/interface.c:784
-+ #, c-format
-+ msgid "          EtherTalk Phase 2 addr:%s\n"
-+ msgstr "          EtherTalk Phase 2 aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:778
-++#: ../lib/interface.c:793
-+ #, c-format
-+ msgid "          econet addr:%s\n"
-+ msgstr "          econeti aadr:%s\n"
-+ 
-+-#: ../lib/interface.c:785
-++#: ../lib/interface.c:800
-++#, c-format
-+ msgid "[NO FLAGS] "
-+ msgstr "[LIPPE POLE]"
-+ 
-+-#: ../lib/interface.c:787
-++#: ../lib/interface.c:802
-++#, c-format
-+ msgid "UP "
-+ msgstr "UP "
-+ 
-+-#: ../lib/interface.c:789
-++#: ../lib/interface.c:804
-++#, c-format
-+ msgid "BROADCAST "
-+ msgstr "BROADCAST "
-+ 
-+-#: ../lib/interface.c:791
-++#: ../lib/interface.c:806
-++#, c-format
-+ msgid "DEBUG "
-+ msgstr "DEBUG "
-+ 
-+-#: ../lib/interface.c:793
-++#: ../lib/interface.c:808
-++#, c-format
-+ msgid "LOOPBACK "
-+ msgstr "LOOPBACK "
-+ 
-+-#: ../lib/interface.c:795
-++#: ../lib/interface.c:810
-++#, c-format
-+ msgid "POINTOPOINT "
-+ msgstr "POINTOPOINT "
-+ 
-+-#: ../lib/interface.c:797
-++#: ../lib/interface.c:812
-++#, c-format
-+ msgid "NOTRAILERS "
-+ msgstr "NOTRAILERS "
-+ 
-+-#: ../lib/interface.c:799
-++#: ../lib/interface.c:814
-++#, c-format
-+ msgid "RUNNING "
-+ msgstr "RUNNING "
-+ 
-+-#: ../lib/interface.c:801
-++#: ../lib/interface.c:816
-++#, c-format
-+ msgid "NOARP "
-+ msgstr "NOARP "
-+ 
-+-#: ../lib/interface.c:803
-++#: ../lib/interface.c:818
-++#, c-format
-+ msgid "PROMISC "
-+ msgstr "PROMISC "
-+ 
-+-#: ../lib/interface.c:805
-++#: ../lib/interface.c:820
-++#, c-format
-+ msgid "ALLMULTI "
-+ msgstr "ALLMULTI "
-+ 
-+-#: ../lib/interface.c:807
-++#: ../lib/interface.c:822
-++#, c-format
-+ msgid "SLAVE "
-+ msgstr "SLAVE "
-+ 
-+-#: ../lib/interface.c:809
-++#: ../lib/interface.c:824
-++#, c-format
-+ msgid "MASTER "
-+ msgstr "MASTER "
-+ 
-+-#: ../lib/interface.c:811
-++#: ../lib/interface.c:826
-++#, c-format
-+ msgid "MULTICAST "
-+ msgstr "MULTICAST "
-+ 
-+-#: ../lib/interface.c:814
-++#: ../lib/interface.c:829
-++#, c-format
-+ msgid "DYNAMIC "
-+ msgstr "DYNAMIC "
-+ 
-+ #. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-+-#: ../lib/interface.c:817
-++#: ../lib/interface.c:832
-+ #, c-format
-+ msgid " MTU:%d  Metric:%d"
-+ msgstr " MTU:%d meetrika:%d"
-+ 
-+-#: ../lib/interface.c:821
-++#: ../lib/interface.c:836
-+ #, c-format
-+ msgid "  Outfill:%d  Keepalive:%d"
-+ msgstr "  ülalhoidepakettide intervall:%d  ülalhoidetaimaut:%d"
-+ 
-+-#: ../lib/interface.c:835
-++#: ../lib/interface.c:850
-+ #, c-format
-+ msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+ msgstr "RX pakette:%llu vigu:%lu ära visatud:%lu ületäit:%lu kaadri vigu:%lu\n"
-+ 
-+-#: ../lib/interface.c:840
-++#: ../lib/interface.c:855
-+ #, c-format
-+ msgid "             compressed:%lu\n"
-+ msgstr "             pakitud:%lu\n"
-+ 
-+-#: ../lib/interface.c:852
-++#: ../lib/interface.c:895
-+ #, c-format
-+ msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+ msgstr "TX pakette:%llu vigu:%lu ära visatud:%lu ületäit:%lu carrier:%lu\n"
-+ 
-+-#: ../lib/interface.c:856
-++#: ../lib/interface.c:899
-+ #, c-format
-+ msgid "          collisions:%lu "
-+ msgstr "          kollisioone:%lu "
-+ 
-+-#: ../lib/interface.c:858
-++#: ../lib/interface.c:901
-+ #, c-format
-+ msgid "compressed:%lu "
-+ msgstr "pakitud:%lu "
-+ 
-+-#: ../lib/interface.c:860
-++#: ../lib/interface.c:903
-+ #, c-format
-+ msgid "txqueuelen:%d "
-+ msgstr "txqueuelen:%d "
-+ 
-+-#: ../lib/interface.c:862
-++#: ../lib/interface.c:905
-+ #, c-format
-+ msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-+ msgstr "RX baite:%llu (%lu.%lu %s)  TX baite:%llu (%lu.%lu %s)\n"
-+ 
-+-#: ../lib/interface.c:873
-++#: ../lib/interface.c:916
-+ #, c-format
-+ msgid "Interrupt:%d "
-+ msgstr "katkestus:%d "
-+ 
-+ #. Only print devices using it for
-+ #. I/O maps
-+-#: ../lib/interface.c:876
-++#: ../lib/interface.c:919
-+ #, c-format
-+ msgid "Base address:0x%x "
-+ msgstr "baasaadress:0x%x "
-+ 
-+-#: ../lib/interface.c:878
-++#: ../lib/interface.c:921
-+ #, c-format
-+ msgid "Memory:%lx-%lx "
-+ msgstr "mälu:%lx-%lx "
-+ 
-+-#: ../lib/interface.c:881
-++#: ../lib/interface.c:924
-+ #, c-format
-+ msgid "DMA chan:%x "
-+ msgstr "DMA kanal:%x "
-+ 
-+ #: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr "Ei leidnud ühtegi kasutatavat aadressiperekonda\n"
-+ 
-+@@ -2538,29 +3011,32 @@ msgstr "iptunnel: %s on vigane IPv4 aadr
-+ msgid "ip: argument is wrong: %s\n"
-+ msgstr "iptunnel: vale argument %s\n"
-+ 
-+-#: ../ipmaddr.c:58
-++#: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr "Kasutamine: ipmaddr [ add | del ] MULTIAADR dev STRING\n"
-+ 
-+-#: ../ipmaddr.c:59
-++#: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr "            ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ 
-+-#: ../ipmaddr.c:60
-++#: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr "            ipmaddr -V | -version\n"
-+ 
-+-#: ../ipmaddr.c:260
-++#: ../ipmaddr.c:263
-+ #, c-format
-+ msgid "family %d "
-+ msgstr "perekond %d "
-+ 
-+-#: ../ipmaddr.c:269
-++#: ../ipmaddr.c:272
-+ #, c-format
-+ msgid " users %d"
-+ msgstr " kasutajaid %d"
-+ 
-+-#: ../ipmaddr.c:355
-++#: ../ipmaddr.c:358
-+ msgid "Cannot create socket"
-+ msgstr "Ei saa avada soklit"
-+ 
-+@@ -2575,6 +3051,7 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr "slattach: tty_lock: (%s): %s\n"
-+ 
-+ #: ../slattach.c:192
-++#, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr "slattach: ei saa PID faili kirjutada\n"
-+ 
-+@@ -2594,18 +3071,22 @@ msgid "slattach: tty_hangup(RAISE): %s\n
-+ msgstr "slattach: tty_hangup(RAISE): %s\n"
-+ 
-+ #: ../slattach.c:468
-++#, c-format
-+ msgid "slattach: tty name too long\n"
-+ msgstr "slattach: terminali nimi on liiga pikk\n"
-+ 
-+ #: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr "slattach: tty_open: ei saa lugeda jooksvat olekut\n"
-+ 
-+ #: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+ msgstr "slattach: tty_open: liiniprotokolli küsimine ebaõnnestus\n"
-+ 
-+ #: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr "slattach: tty_open: ei saa seada RAW moodi\n"
-+ 
-+@@ -2615,6 +3096,7 @@ msgid "slattach: tty_open: cannot set %s
-+ msgstr "slattach: tty_open: ei saa seada kiiruseks %s bps\n"
-+ 
-+ #: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr "slattach: tty_open: ei saa seada 8N1 moodi\n"
-+ 
-+@@ -2637,3 +3119,20 @@ msgstr " pordil %s"
-+ #, c-format
-+ msgid " interface %s\n"
-+ msgstr " liides %s\n"
-++
-++#~ msgid ""
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-++#~ "<-''-\n"
-++#~ msgstr ""
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hosti nimi> <hwaddr> [netmask <nm>] "
-++#~ "pub\n"
-++
-++#~ msgid "%s: unknown interface: %s\n"
-++#~ msgstr "ifconfig: tundmatu liides %s: %s\n"
-++
-++#~ msgid "        -n, --numeric            dont resolve names\n"
-++#~ msgstr ""
-++#~ "        -n, --numeric            mitte lahendada numbreid nimedeks\n"
-++
-++#~ msgid "Routing table for `ddp' not yet supported.\n"
-++#~ msgstr "`ddp' jaoks ruutingutabelit veel ei oska\n"
-+Index: net-tools/po/cs.po
-+===================================================================
-+--- net-tools.orig/po/cs.po
-++++ net-tools/po/cs.po
-+@@ -5,7 +5,8 @@
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: net-tools-1.51\n"
-+-"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+ "PO-Revision-Date: 1999-08-29 23:20+0200\n"
-+ "Last-Translator: Jiøí Pavlovský <pavlovsk@ff.cuni.cz>\n"
-+ "Language-Team: Czech <cs@li.org>\n"
-+@@ -13,96 +14,110 @@ msgstr ""
-+ "Content-Type: text/plain; charset=iso-8859-2\n"
-+ "Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:110 ../arp.c:269
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+ msgstr "arp: je tøeba jméno poèítaèe\n"
-+ 
-+-#: ../arp.c:207 ../arp.c:221
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+ msgstr "Pro %s neexistuje ARP polo¾ka\n"
-+ 
-+-#: ../arp.c:239
-++#: ../arp.c:248
-+ #, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr "arp: HW adresu `%s' nelze zjistit: %s\n"
-+ 
-+-#: ../arp.c:243
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr "arp: chybnì zadaný typ protokolu\n"
-+ 
-+-#: ../arp.c:252
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+ msgstr "arp: zaøízení `%s' má Hw adresu %s `%s'.\n"
-+ 
-+-#: ../arp.c:282
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+ msgstr "arp: je tøeba hardwarová adresa\n"
-+ 
-+-#: ../arp.c:290
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr "arp: nesprávná hardwarová adresa\n"
-+ 
-+-#: ../arp.c:387
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr "arp: databázi ethernetových adres %s nelze otevøít!\n"
-+ 
-+-#: ../arp.c:403
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr "arp: syntaktická chyba na øádku %u databáze ethernetových adres %s!\n"
-+ 
-+-#: ../arp.c:416
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr ""
-+ "arp: polo¾ku na øádku %u databáze ethernetových adres %s nelze nastavit!\n"
-+ 
-+-#: ../arp.c:437
-+-msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-++#: ../arp.c:448
-++#, fuzzy, c-format
-++msgid ""
-++"Address                  HWtype  HWaddress           Flags Mask            "
-++"Iface\n"
-+ msgstr "Adresa\t\t\t HWtyp\t HWadresa\t     Pøíz  Maska\t\t   Rozhraní\n"
-+ 
-+-#: ../arp.c:467
-++#: ../arp.c:476
-++#, fuzzy
-++msgid "<from_interface>"
-++msgstr " rozhraní %s\n"
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+ msgstr "(nekompletní)"
-+ 
-+-#: ../arp.c:484
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr "%s (%s) na "
-+ 
-+-#: ../arp.c:490
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr "<nekompletní>"
-+ 
-+-#: ../arp.c:496
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr "sí»ová maska %s "
-+ 
-+-#: ../arp.c:513
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr "na %s\n"
-+ 
-+-#: ../arp.c:592
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr "Polo¾ky: %d\tVynecháno: %d\tNalezeno: %d\n"
-+ 
-+-#: ../arp.c:596
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr "%s (%s) -- ¾ádná polo¾ka\n"
-+ 
-+-#: ../arp.c:598
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+ msgstr "arp: ¾ádná z polo¾ek (%d) nevyhovuje.\n"
-+ 
-+-#: ../arp.c:613
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+@@ -112,49 +127,46 @@ msgstr ""
-+ "  arp [-vn]  [<HW>] [-i <if> [-a] [<poèítaè>]             <-Zobrazí ARP "
-+ "cache\n"
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:627
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+ msgstr ""
-+ "  arp [-v]          [-i <if>] -d <poèítaè> [pub][nopub]   <-Sma¾e polo¾ku "
-+ "ARP\n"
-+ 
-+-#: ../arp.c:615
-+-#, fuzzy
-++#: ../arp.c:628
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+ msgstr ""
-+ "  arp [-vnD] [<HW>] [-i <if>] -f <soubor>                 <-Pøidá polo¾ku "
-+ "ze\n"
-+ "                                                          souboru\n"
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:629
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+ msgstr ""
-+ "  arp [-v]   [<HW> [-i <if> -s   <poèítaè> <hwadr> [temp][nopub] <-Pøidá "
-+ "polo¾ku\n"
-+ 
-+-#: ../arp.c:617
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s <soubor> <hwadr> [sí»mask <èís>]  <-''-\n"
-+-
-+-#: ../arp.c:618
-++#: ../arp.c:630
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+ msgstr ""
-+ "  arp [-v]   [<HW> [-i <if> -Ds  <poèítaè> <if> [sí»mask <èís>] pub      "
-+ "<-''-\n"
-+ 
-+-#: ../arp.c:620
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+@@ -162,126 +174,134 @@ msgstr ""
-+ "        -a                       zobrazí jmna v¹ech poèítaèù alternativním\n"
-+ "                                 (BSD) zpùsobem\n"
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr "        -s, --set                nastaví novou ARP polo¾ku\n"
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr "        -d, --delete             sma¾e zadanou ARP polo¾ku\n"
-+ 
-+-#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr ""
-+ "        -v, --verbose            bude vypisovat podrobné zprávy\n"
-+ "                                 o èinnosti\n"
-+ 
-+-#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
-+-msgid "        -n, --numeric            dont resolve names\n"
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, fuzzy, c-format
-++msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr ""
-+ "        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-+ "                                 na kanonická jména\n"
-+ 
-+-#: ../arp.c:625
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+ msgstr "        -i, --device             zadává sí»ové rozhraní (napø. eth0)\n"
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+ msgstr "        -D, --use-device         ète <hwadr> ze zadaného zaøízení\n"
-+ 
-+-#: ../arp.c:627
-+-#, fuzzy
-++#: ../arp.c:639
-++#, fuzzy, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr "         -r, --route              vypí¹e smìrovací tabulku\n"
-+ 
-+-#: ../arp.c:628
-+-#, fuzzy
-++#: ../arp.c:640
-++#, fuzzy, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+ "        -f, --file               ète nové polo¾ky ze souboru\n"
-+ "\n"
-+ 
-+-#: ../arp.c:630 ../rarp.c:181
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+ msgstr ""
-+ "  <HW>=Pou¾ijte '-H <hw> pro zadání hardwarového typu adresy.\n"
-+ "  Implicitnì: %s\n"
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr "  Seznam mo¾ných hardwarových typù (podporujících ARP):\n"
-+ 
-+-#: ../arp.c:664
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr "hardwarový typ %s není podporován!\n"
-+ 
-+-#: ../arp.c:668
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr "tøída adres %s není podporována!\n"
-+ 
-+-#: ../arp.c:703
-++#: ../arp.c:716
-++#, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr "arp: pøepínaè -N není zatím podporován\n"
-+ 
-+-#: ../arp.c:713
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr "arp: neznámá tøída adres %s.\n"
-+ 
-+-#: ../arp.c:722
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr "arp: neznámý hardwarový typ %s.\n"
-+ 
-+-#: ../arp.c:741
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+ msgstr "arp: %s: jádro podporuje pouze 'inet'.\n"
-+ 
-+-#: ../arp.c:746
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr "arp: hardwarový typ %s nepodporuje ARP.\n"
-+ 
-+-#: ../hostname.c:69
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+ msgstr "Nastavuji jméno uzlu na `%s'\n"
-+ 
-+-#: ../hostname.c:74
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr "%s: jméno uzlu mù¾e zmìnit pouze superu¾ivatel\n"
-+ 
-+-#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr "jméno %s je pøíli¹ dlouhé\n"
-+ 
-+-#: ../hostname.c:89
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+ msgstr "Nastavuji jméno poèítaèe na `%s'\n"
-+ 
-+-#: ../hostname.c:94
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+ msgstr "%s: jméno poèítaèe mù¾e zmìnit pouze superu¾ivatel\n"
-+ 
-+-#: ../hostname.c:108
-++#: ../hostname.c:109
-+ #, c-format
-+ msgid "Setting domainname to `%s'\n"
-+ msgstr "Nastavuji jméno domény na `%s'\n"
-+ 
-+-#: ../hostname.c:113
-++#: ../hostname.c:114
-+ #, c-format
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr "%s: jméno domény mù¾e zmìnit pouze superu¾ivatel\n"
-+@@ -306,26 +326,29 @@ msgstr "Výsledek: h_aliases=`%s'\n"
-+ msgid "Result: h_addr_list=`%s'\n"
-+ msgstr "Výsledek: h_addr_list=`%s'\n"
-+ 
-+-#: ../hostname.c:209
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+ msgstr "%s: `%s' nelze otevøít\n"
-+ 
-+-#: ../hostname.c:223
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+ msgstr ""
-+ "Pou¾ití:\n"
-+ "    hostname [-v] {jméno|-F soubor}       nastaví jméno poèítaèe (ze "
-+ "souboru)\n"
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+ msgstr ""
-+ "    domainname [-v] {jméno|-F soubor}     nastaví jméno NIS domény (ze\n"
-+ "                                          souboru)\n"
-+ 
-+-#: ../hostname.c:226
-++#: ../hostname.c:225
-++#, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+@@ -333,11 +356,13 @@ msgstr ""
-+ "    nodename [-v] {jméno|-F soubor}       nastaví jméno DECnet uzlu (ze\n"
-+ "                                          souboru)\n"
-+ 
-+-#: ../hostname.c:228
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr "    hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  vypí¹e formátované jméno\n"
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+@@ -345,7 +370,8 @@ msgstr ""
-+ "    hostname [-v]                         vypí¹e jméno poèítaèe\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+@@ -353,7 +379,8 @@ msgstr ""
-+ "    hostname -V|--version|-h|--help       vypí¹e informace a skonèí\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+@@ -361,35 +388,43 @@ msgstr ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr "    -s, --short           krátké jméno poèítaèe\n"
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr "    -a, --alias           pøezdívky\n"
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr "    -i, --ip-address      adresy odpovídající jménu poèítaèe\n"
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr "    -f, --fqdn, --long    dlouhé jméno poèítaèe (kanonické)\n"
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+ msgstr "    -d, --domain          jméno DNS domény\n"
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+ msgstr "    -y, --yp, --nis       jméno NIS/YP domény\n"
-+ 
-+-#: ../hostname.c:239
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+ msgstr "    -n, --node            jméno DECnet uzlu\n"
-+ 
-+-#: ../hostname.c:241
-++#: ../hostname.c:240
-++#, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+@@ -397,7 +432,8 @@ msgstr ""
-+ "    -F, --file            ète jméno poèítaèe èi nis domény ze souboru\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:243
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -412,6 +448,7 @@ msgid "%s: You can't change the DNS doma
-+ msgstr "%s: Tímto pøíkazem nelze DNS jméno domény zmìnit\n"
-+ 
-+ #: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+@@ -421,6 +458,7 @@ msgstr ""
-+ "zmìnit\n"
-+ 
-+ #: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr ""
-+ "DNS jméno domény (je souèástí kanonického jména poèítaèe) v souboru\n"
-+@@ -441,349 +479,223 @@ msgstr "getdomainname()=`%s'\n"
-+ msgid "getnodename()=`%s'\n"
-+ msgstr "getnodename()=`%s'\n"
-+ 
-+-#: ../ifconfig.c:159
-+-#, c-format
-+-msgid "%-9.9s Link encap:%s  "
-+-msgstr "%-9.9s Zapouzdøení:%s  "
-++#: ../ifconfig.c:107
-++#, fuzzy, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr ""
-++"Rozhr   MTU Met    PØ-OK PØ-CHYB PØ-ZAH PØ-PØT   OD-OK OD-CHYB OD-ZAH OD-PØT "
-++"PØZ\n"
-+ 
-+-#: ../ifconfig.c:164
-+-#, c-format
-+-msgid "HWaddr %s  "
-+-msgstr "HWadr %s  "
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, fuzzy, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
-+ 
-+-#: ../ifconfig.c:167
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-+ #, c-format
-+-msgid "Media:%s"
-+-msgstr "Médium:%s"
-++msgid "No support for INET on this system.\n"
-++msgstr "Tento systém nepodporuje INET.\n"
-+ 
-+-#: ../ifconfig.c:169
-+-msgid "(auto)"
-+-msgstr "(auto)"
-++#: ../ifconfig.c:193
-++#, fuzzy, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
-+ 
-+-#: ../ifconfig.c:176
-+-#, c-format
-+-msgid "          %s addr:%s "
-+-msgstr "          %s adr:%s "
-++#: ../ifconfig.c:202
-++#, fuzzy, c-format
-++msgid ""
-++"Usage:\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++msgstr ""
-++"Pou¾ití:\n"
-++"  ifconfig [-a] [-i] [-v] <rozhraní> [[<AF>] <adresa>]\n"
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:204
-+ #, c-format
-+-msgid " P-t-P:%s "
-+-msgstr " P-t-P:%s "
-++msgid "  [add <address>[/<prefixlen>]]\n"
-++msgstr "  [add <adresa>[/<délka prefixu>]]\n"
-+ 
-+-# V ostatních katalozích se pøekládá Broadcast -> v¹esmìrové vysílání.
-+-# Tudi¾ bcast -> V¹esmìr :)
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:205
-+ #, c-format
-+-msgid " Bcast:%s "
-+-msgstr " V¹esmìr:%s "
-++msgid "  [del <address>[/<prefixlen>]]\n"
-++msgstr "  [del <adresa>[/<délka prefixu>]]\n"
-+ 
-+-#: ../ifconfig.c:184
-++#: ../ifconfig.c:206
-+ #, c-format
-+-msgid " Mask:%s\n"
-+-msgstr "Maska:%s\n"
-++msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-++msgstr "  [[-]broadcast [<adresa>]]  [[-]pointopoint [<adresa>]]\n"
-+ 
-+-#: ../ifconfig.c:201
-++#: ../ifconfig.c:207
-+ #, c-format
-+-msgid "          inet6 addr: %s/%d"
-+-msgstr "          inet6-adr: %s/%d"
-++msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-++msgstr "  [netmask <adresa>]  [dstaddr <adresa>]  [tunnel <adresa>]\n"
-+ 
-+-#: ../ifconfig.c:203
-+-msgid " Scope:"
-+-msgstr " Rozsah:"
-++#: ../ifconfig.c:210
-++#, c-format
-++msgid "  [outfill <NN>] [keepalive <NN>]\n"
-++msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+ 
-+-#: ../ifconfig.c:206
-+-msgid "Global"
-+-msgstr "Globál"
-++#: ../ifconfig.c:212
-++#, c-format
-++msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-++msgstr "  [hw <HW> <adresa>]  [metric <NN>]  [mtu <NN>]\n"
-+ 
-+-#: ../ifconfig.c:209
-+-msgid "Link"
-+-msgstr "Linka"
-++#: ../ifconfig.c:213
-++#, c-format
-++msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ 
-+-#: ../ifconfig.c:212
-+-msgid "Site"
-+-msgstr "Stanovi¹tì"
-++#: ../ifconfig.c:214
-++#, c-format
-++msgid "  [multicast]  [[-]promisc]\n"
-++msgstr "  [multicast]  [[-]promisc]\n"
-+ 
-+ #: ../ifconfig.c:215
-+-msgid "Compat"
-+-msgstr "Kompatibilita"
-++#, c-format
-++msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-++msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <typ>]\n"
-+ 
-+-#: ../ifconfig.c:218
-+-msgid "Host"
-+-msgstr "Poèítaè"
-++#: ../ifconfig.c:217
-++#, c-format
-++msgid "  [txqueuelen <NN>]\n"
-++msgstr "  [txqueuelen délka]\n"
-+ 
-+-#: ../ifconfig.c:221
-+-msgid "Unknown"
-+-msgstr "Neznám."
-++#: ../ifconfig.c:220
-++#, c-format
-++msgid "  [[-]dynamic]\n"
-++msgstr "  [[-]dynamic]\n"
-+ 
-+-#: ../ifconfig.c:236
-++#: ../ifconfig.c:222
-+ #, c-format
-+-msgid "          IPX/Ethernet II addr:%s\n"
-+-msgstr "          IPX/Ethernet II adr: %s\n"
-++msgid ""
-++"  [up|down] ...\n"
-++"\n"
-++msgstr ""
-++"  [up|down] ...\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:239
-++#: ../ifconfig.c:224
-+ #, c-format
-+-msgid "          IPX/Ethernet SNAP addr:%s\n"
-+-msgstr "          IPX/Ethernet SNAP adr:%s\n"
-++msgid "  <HW>=Hardware Type.\n"
-++msgstr "   <HW>=Hardwarový Typ.\n"
-+ 
-+-#: ../ifconfig.c:242
-++#: ../ifconfig.c:225
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+-msgstr "          IPX/Ethernet 802.2 adr:%s\n"
-++msgid "  List of possible hardware types:\n"
-++msgstr "  Seznam mo¾ných hardwarových typù:\n"
-+ 
-+-#: ../ifconfig.c:245
-++#. 1 = ARPable
-++#: ../ifconfig.c:227
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+-msgstr "          IPX/Ethernet 802.3 adr:%s\n"
-++msgid "  <AF>=Address family. Default: %s\n"
-++msgstr "   <AF>=tøída adres. Implicitní: %s\n"
-+ 
-+-#: ../ifconfig.c:255
-++#: ../ifconfig.c:228
-+ #, c-format
-+-msgid "          EtherTalk Phase 2 addr:%s\n"
-+-msgstr "          EtherTalk Phase 2 adr:%s\n"
-++msgid "  List of possible address families:\n"
-++msgstr "  Seznam mo¾ných tøíd adres:\n"
-+ 
-+-#: ../ifconfig.c:264
-++#: ../ifconfig.c:303
-+ #, c-format
-+-msgid "          econet addr:%s\n"
-+-msgstr "          econet adr:%s\n"
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr ""
-+ 
-+-# Hic sunt leones ...
-+-#: ../ifconfig.c:270
-+-msgid "[NO FLAGS] "
-+-msgstr "[®ÁDNÉ PØÍZNAKY]"
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:272
-+-msgid "UP "
-+-msgstr "AKTIVOVÁNO "
-++#: ../ifconfig.c:380
-++#, c-format
-++msgid "Unknown media type.\n"
-++msgstr "Neznámý typ média.\n"
-+ 
-+-#: ../ifconfig.c:274
-+-msgid "BROADCAST "
-+-msgstr "V©ESMÌROVÉ_VYSÍLÁNÍ "
-++#: ../ifconfig.c:417
-++#, c-format
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:276
-+-msgid "DEBUG "
-+-msgstr "DEBUG "
-++#: ../ifconfig.c:429
-++#, c-format
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:278
-+-msgid "LOOPBACK "
-+-msgstr "SMYÈKA "
-++#: ../ifconfig.c:441
-++#, c-format
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:280
-+-msgid "POINTOPOINT "
-+-msgstr "POINTOPOINT "
-++#: ../ifconfig.c:465
-++#, c-format
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr ""
-+ 
-+-# ??
-+-#: ../ifconfig.c:282
-+-msgid "NOTRAILERS "
-+-msgstr "NOTRAILERS "
-++#: ../ifconfig.c:523
-++#, c-format
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:284
-+-msgid "RUNNING "
-+-msgstr "BÌ®Í "
-++#: ../ifconfig.c:652
-++#, c-format
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:286
-+-msgid "NOARP "
-+-msgstr "NEARP "
-++#: ../ifconfig.c:684
-++#, c-format
-++msgid "hw address type `%s' has no handler to set address. failed.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:288
-+-msgid "PROMISC "
-+-msgstr "PROMISK "
-++#: ../ifconfig.c:693
-++#, c-format
-++msgid "%s: invalid %s address.\n"
-++msgstr "%s: adresa %s je nesprávná.\n"
-+ 
-+-#: ../ifconfig.c:290
-+-msgid "ALLMULTI "
-+-msgstr "ALLMULTI "
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-++#, c-format
-++msgid "No support for INET6 on this system.\n"
-++msgstr "Tento systém nepodporuje INET6.\n"
-+ 
-+-#: ../ifconfig.c:292
-+-msgid "SLAVE "
-+-msgstr "SLAVE "
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-++#, c-format
-++msgid "Interface %s not initialized\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:294
-+-msgid "MASTER "
-+-msgstr "MASTER "
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, fuzzy, c-format
-++msgid "Bad address.\n"
-++msgstr "%s: adresa %s je nesprávná.\n"
-+ 
-+-#: ../ifconfig.c:296
-+-msgid "MULTICAST "
-+-msgstr "MULTICAST "
-+-
-+-#: ../ifconfig.c:299
-+-msgid "DYNAMIC "
-+-msgstr "DYNAMIC "
-+-
-+-#: ../ifconfig.c:302
-+-#, c-format
-+-msgid " MTU:%d  Metric:%d"
-+-msgstr " MTU:%d  Metrika:%d"
-+-
-+-#: ../ifconfig.c:306
-+-#, c-format
-+-msgid "  Outfill:%d  Keepalive:%d"
-+-msgstr "  Outfill:%d  Keepalive:%d"
-+-
-+-#: ../ifconfig.c:320
-+-#, c-format
-+-msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+-msgstr "pøijmutých paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu rámcù:%lu\n"
-+-
-+-#: ../ifconfig.c:325
-+-#, c-format
-+-msgid "             compressed:%lu\n"
-+-msgstr "             komprimováno:%lu\n"
-+-
-+-# carrier?
-+-#: ../ifconfig.c:329
-+-#, c-format
-+-msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+-msgstr "odeslaných paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu pøenos:%lu\n"
-+-
-+-#: ../ifconfig.c:333
-+-#, c-format
-+-msgid "          collisions:%lu "
-+-msgstr "          kolizí:%lu "
-+-
-+-#: ../ifconfig.c:335
-+-#, c-format
-+-msgid "compressed:%lu "
-+-msgstr "komprimováno:%lu "
-+-
-+-#: ../ifconfig.c:337
-+-#, c-format
-+-msgid "txqueuelen:%d "
-+-msgstr "délka odchozí fronty:%d "
-+-
-+-#: ../ifconfig.c:345
-+-#, c-format
-+-msgid "Interrupt:%d "
-+-msgstr "Pøeru¹ení:%d "
-+-
-+-#. Only print devices using it for
-+-#. I/O maps
-+-#: ../ifconfig.c:348
-+-#, c-format
-+-msgid "Base address:0x%x "
-+-msgstr "Vstupnì/Výstupní port:0x%x "
-+-
-+-#: ../ifconfig.c:350
-+-#, c-format
-+-msgid "Memory:%lx-%lx "
-+-msgstr "Pamì»:%lx-%lx "
-+-
-+-#: ../ifconfig.c:353
-+-#, c-format
-+-msgid "DMA chan:%x "
-+-msgstr "Kanál DMA:%x "
-+-
-+-#: ../ifconfig.c:384 ../ifconfig.c:405
-+-#, c-format
-+-msgid "%s: unknown interface: %s\n"
-+-msgstr "%s: rozhraní %s není známo\n"
-+-
-+-#: ../ifconfig.c:421
-+-msgid ""
-+-"Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
-+-msgstr ""
-+-"Pou¾ití:\n"
-+-"  ifconfig [-a] [-i] [-v] <rozhraní> [[<AF>] <adresa>]\n"
-+-
-+-#: ../ifconfig.c:425
-+-msgid "  [add <address>[/<prefixlen>]]\n"
-+-msgstr "  [add <adresa>[/<délka prefixu>]]\n"
-+-
-+-#: ../ifconfig.c:427
-+-msgid "  [del <address>[/<prefixlen>]]\n"
-+-msgstr "  [del <adresa>[/<délka prefixu>]]\n"
-+-
-+-#: ../ifconfig.c:432
-+-msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+-msgstr "  [[-]broadcast [<adresa>]]  [[-]pointopoint [<adresa>]]\n"
-+-
-+-#: ../ifconfig.c:433
-+-msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+-msgstr "  [netmask <adresa>]  [dstaddr <adresa>]  [tunnel <adresa>]\n"
-+-
-+-#: ../ifconfig.c:436
-+-msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+-msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+-
-+-#: ../ifconfig.c:438
-+-msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+-msgstr "  [hw <HW> <adresa>]  [metric <NN>]  [mtu <NN>]\n"
-+-
-+-#: ../ifconfig.c:439
-+-msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-
-+-#: ../ifconfig.c:440
-+-msgid "  [multicast]  [[-]promisc]\n"
-+-msgstr "  [multicast]  [[-]promisc]\n"
-+-
-+-#: ../ifconfig.c:441
-+-msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+-msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <typ>]\n"
-+-
-+-#: ../ifconfig.c:443
-+-msgid "  [txqueuelen <NN>]\n"
-+-msgstr "  [txqueuelen délka]\n"
-+-
-+-#: ../ifconfig.c:446
-+-msgid "  [[-]dynamic]\n"
-+-msgstr "  [[-]dynamic]\n"
-+-
-+-#: ../ifconfig.c:448
-+-msgid ""
-+-"  [up|down] ...\n"
-+-"\n"
-+-msgstr ""
-+-"  [up|down] ...\n"
-+-"\n"
-+-
-+-#: ../ifconfig.c:450
-+-msgid "  <HW>=Hardware Type.\n"
-+-msgstr "   <HW>=Hardwarový Typ.\n"
-+-
-+-#: ../ifconfig.c:451
-+-msgid "  List of possible hardware types:\n"
-+-msgstr "  Seznam mo¾ných hardwarových typù:\n"
-+-
-+-#. 1 = ARPable
-+-#: ../ifconfig.c:453
-+-#, c-format
-+-msgid "  <AF>=Address family. Default: %s\n"
-+-msgstr "   <AF>=tøída adres. Implicitní: %s\n"
-+-
-+-#: ../ifconfig.c:454
-+-msgid "  List of possible address families:\n"
-+-msgstr "  Seznam mo¾ných tøíd adres:\n"
-+-
-+-#: ../ifconfig.c:593
-+-msgid "Unknown media type.\n"
-+-msgstr "Neznámý typ média.\n"
-+-
-+-#: ../ifconfig.c:881
-++#: ../ifconfig.c:885
-+ #, c-format
-+-msgid "%s: invalid %s address.\n"
-+-msgstr "%s: adresa %s je nesprávná.\n"
-+-
-+-#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
-+-msgid "No support for INET6 on this system.\n"
-+-msgstr "Tento systém nepodporuje INET6.\n"
-+-
-+-#: ../ifconfig.c:983
-+ msgid "Address deletion not supported on this system.\n"
-+ msgstr "Tento systém nepodporuje mazání adres.\n"
-+ 
-+-#: ../ifconfig.c:1066
-+-msgid "No support for INET on this system.\n"
-+-msgstr "Tento systém nepodporuje INET.\n"
-++#: ../ifconfig.c:957
-++#, fuzzy, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "Nevím, jak nastavit adresu tøídy %d.\n"
-+ 
-+-#: ../ifconfig.c:1076
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr "Tento systém nepodporuje ECONET.\n"
-+ 
-+-#: ../ifconfig.c:1084
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr "Nevím, jak nastavit adresu tøídy %d.\n"
-+ 
-+-#: ../netstat.c:383
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+@@ -792,7 +704,8 @@ msgstr ""
-+ "jste\n"
-+ "byl superu¾ivatelem)\n"
-+ 
-+-#: ../netstat.c:387
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+@@ -801,199 +714,223 @@ msgstr ""
-+ "pouze o procesech, jich¾ jste vlastníkem. Aby jste mohl vidìt v¹e, musel\n"
-+ "byste být superu¾ivatelem.)\n"
-+ 
-+-#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr "NASLOUCHÁ"
-+ 
-+-#: ../netstat.c:395
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr "CONN ODESLÁN"
-+ 
-+-#: ../netstat.c:396 ../netstat.c:1168
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr "DISC ODESLÁN"
-+ 
-+-#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr "SPOJENO"
-+ 
-+-#: ../netstat.c:419
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr "Aktivní NET/ROM sokety\n"
-+ 
-+-#: ../netstat.c:420
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+-"U¾ivatel   Cíl        Zdroj      Zaøízení Stav        Vr/Vs    Odch-F "
-+-"Pøích-F\n"
-++"U¾ivatel   Cíl        Zdroj      Zaøízení Stav        Vr/Vs    Odch-F Pøích-"
-++"F\n"
-+ 
-+-#: ../netstat.c:430 ../netstat.c:1208
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr "Chyba pøi ètení dat z %s\n"
-+ 
-+ # následující radìji ponechat v originále ?!
-+-#: ../netstat.c:465
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr "SYN_SENT"
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr "SYN_RECV"
-+ 
-+-#: ../netstat.c:467
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr "FIN_WAIT1"
-+ 
-+-#: ../netstat.c:468
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr "FIN_WAIT2"
-+ 
-+-#: ../netstat.c:469
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr "TIME_WAIT"
-+ 
-+-#: ../netstat.c:470
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr "ZAVØEN"
-+ 
-+-#: ../netstat.c:471
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr "CLOSE_WAIT"
-+ 
-+-#: ../netstat.c:472
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr "POSLEDNÍ ACK"
-+ 
-+-#: ../netstat.c:473
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr "LISTEN"
-+ 
-+-#: ../netstat.c:474
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr "ZAVíRÁ"
-+ 
-+-#: ../netstat.c:544
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr "varování, nesmyslný igmp6 øádek %d.\n"
-+ 
-+-#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
-+-#: ../netstat.c:935 ../netstat.c:940
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr "netstat: tøída adres %d není podporována !\n"
-+ 
-+-#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr "varování, nesmyslný igmp øádek %d.\n"
-+ 
-+-#: ../netstat.c:666
-++#: ../netstat.c:677
-++#, fuzzy, c-format
-++msgid "Active X.25 sockets\n"
-++msgstr "Aktivní AX.25 sokety\n"
-++
-++#. IMHO, Vr/Vs is not very usefull --SF
-++#: ../netstat.c:679
-++#, fuzzy, c-format
-++msgid ""
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-++msgstr "Cíl        Zdroj      Zaøíz   Stav         Vr/Vs    Odhod-F Pøích-F\n"
-++
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr "varování, nesmyslný tcp øádek.\n"
-+ 
-+-#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr "vyp (0.00/%ld/%d)"
-+ 
-+-#: ../netstat.c:708
-++#: ../netstat.c:804
-+ #, fuzzy, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr "zap%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:713
-++#: ../netstat.c:809
-+ #, fuzzy, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr "zap%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:718
-++#: ../netstat.c:814
-+ #, fuzzy, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr "zap%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr "nezn-%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:799
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr "varování, nesmyslný udp øádek.\n"
-+ 
-+-#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr "NEZNÁM"
-+ 
-+-#: ../netstat.c:860 ../netstat.c:980
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr "zap%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:949
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr "varování, nesmyslný 'raw' øádek.\n"
-+ 
-+-#: ../netstat.c:1028
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr "varování, netstat 'unix' øádek.\n"
-+ 
-+-#: ../netstat.c:1055
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr "STREAM"
-+ 
-+-#: ../netstat.c:1059
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr "DGRAM"
-+ 
-+-#: ../netstat.c:1063
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr "RAW"
-+ 
-+-#: ../netstat.c:1067
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr "RDM"
-+ 
-+-#: ../netstat.c:1071
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+ msgstr "SEQPACKET"
-+ 
-+-#: ../netstat.c:1080
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr "NEALOKOVÁN"
-+ 
-+-#: ../netstat.c:1096
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr "SPOJUJE"
-+ 
-+-#: ../netstat.c:1100
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr "SPOJEN"
-+ 
-+-#: ../netstat.c:1104
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr "ODPOJUJE"
-+ 
-+-#: ../netstat.c:1135
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+ msgstr "Aktivní sokety domény UNIX "
-+ 
-+-#: ../netstat.c:1137 ../netstat.c:1666
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr "(servery a navázaná spojení)"
-+ 
-+-#: ../netstat.c:1140 ../netstat.c:1669
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr "(pouze servery)"
-+ 
-+-#: ../netstat.c:1142 ../netstat.c:1671
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr "(w/o servery)"
-+ 
-+-#: ../netstat.c:1145
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+@@ -1001,90 +938,92 @@ msgstr ""
-+ "\n"
-+ "Proto Èítaè  Pøíznaky    Typ        Stav          I-Uzel"
-+ 
-+-#: ../netstat.c:1147
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr " Cesta\n"
-+ 
-+-#: ../netstat.c:1167
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr "SABM ODESLÁN"
-+ 
-+-#: ../netstat.c:1170
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr "OBNOVA"
-+ 
-+-#: ../netstat.c:1184
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr "Aktivní AX.25 sokety\n"
-+ 
-+-#: ../netstat.c:1185
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr "Cíl        Zdroj      Zaøíz   Stav         Vr/Vs    Odhod-F Pøích-F\n"
-+ 
-+-#: ../netstat.c:1228
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr "chyba pøi ètení dat z %s\n"
-+ 
-+-#: ../netstat.c:1279
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+ "State"
-+ msgstr ""
-+ "Aktivní IPX sokety\n"
-+-"Proto Pøích-F Odch-F Lokál adresa              Vzdálená adresa               "
-+-" Stav"
-++"Proto Pøích-F Odch-F Lokál adresa              Vzdálená "
-++"adresa                Stav"
-+ 
-+-#: ../netstat.c:1281
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr " U¾ivatel"
-+ 
-+-#: ../netstat.c:1315
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr "SPOJEN"
-+ 
-+-#: ../netstat.c:1323
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr "NEZ."
-+ 
-+-#: ../netstat.c:1367
-+-msgid "     - no statistics available -"
-+-msgstr "     - statistická data nejsou dostupná -"
-+-
-+-#: ../netstat.c:1370
-+-msgid "[NO FLAGS]"
-+-msgstr "[®ÁDNÉ PØÍZNAKY]"
-+-
-+-#: ../netstat.c:1400
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+ msgstr "Tabulka rozhraní v jádru\n"
-+ 
-+-#: ../netstat.c:1401
-++#: ../netstat.c:1465
-++#, fuzzy, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+ "Rozhr   MTU Met    PØ-OK PØ-CHYB PØ-ZAH PØ-PØT   OD-OK OD-CHYB OD-ZAH OD-PØT "
-+ "PØZ\n"
-+ 
-+-#: ../netstat.c:1404
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+ msgstr "chybí informace o rozhraní"
-+ 
-+-#: ../netstat.c:1425
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+-"Pou¾ití: netstat [--veenNcCF] [<TA>] -r       netstat "
-+-"{-V|--version|-h|--help}\n"
-++"Pou¾ití: netstat [--veenNcCF] [<TA>] -r       netstat {-V|--version|-h|--"
-++"help}\n"
-+ 
-+-#: ../netstat.c:1426
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr "         netstat [-vnNcaeol] [<Soket> ...]\n"
-+ 
-+-#: ../netstat.c:1427
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+@@ -1092,27 +1031,32 @@ msgstr ""
-+ "         netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1429
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr "         -r, --route              vypí¹e smìrovací tabulku\n"
-+ 
-+-#: ../netstat.c:1430
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr "         -i, --interfaces         vypí¹e tabulku rozhraní\n"
-+ 
-+-#: ../netstat.c:1431
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr ""
-+ "         -g, --groups             vypí¹e èlenství v multicast skupinách\n"
-+ 
-+-#: ../netstat.c:1432
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+ msgstr ""
-+ "         -s, --statistics         vypí¹e statistiku sí»ové aktivity (jako "
-+ "SNMP)\n"
-+ 
-+-#: ../netstat.c:1434
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+@@ -1120,20 +1064,45 @@ msgstr ""
-+ "         -M, --masquerade         vypí¹e maskovaná spojení\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1438 ../route.c:87
-++#: ../netstat.c:1505
-++#, fuzzy, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-++msgstr ""
-++"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-++"                                 na kanonická jména\n"
-++
-++#: ../netstat.c:1506
-++#, fuzzy, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-++msgstr ""
-++"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-++"                                 na kanonická jména\n"
-++
-++#: ../netstat.c:1507
-++#, fuzzy, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-++msgstr ""
-++"        -n, --numeric            nebude pøevádìt èíselné adresy\n"
-++"                                 na kanonická jména\n"
-++
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr "         -N, --symbolic           pøevede hw jména\n"
-+ 
-+-#: ../netstat.c:1439 ../route.c:88
-++#: ../netstat.c:1509 ../route.c:88
-++#, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+ msgstr "         -e, --extend             vypí¹e podrobnìj¹í informace\n"
-+ 
-+-#: ../netstat.c:1440
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+ msgstr ""
-+ "         -p, --programs           vypí¹e PID/jméno programu pro sokety\n"
-+ 
-+-#: ../netstat.c:1441
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+@@ -1141,23 +1110,27 @@ msgstr ""
-+ "         -c, --continuous         nepøeru¹ovaný výpis\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1442
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+ msgstr ""
-+ "         -l, --listening          vypí¹e sokety, na nich¾ je nasloucháno\n"
-+ 
-+-#: ../netstat.c:1443
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+ msgstr ""
-+ "         -a, --all, --listening   vypí¹e v¹echny sokety (implicitnì: "
-+ "spojené)\n"
-+ 
-+-#: ../netstat.c:1444
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr "         -o, --timers             zobrazí èasovaèe\n"
-+ 
-+-#: ../netstat.c:1445 ../route.c:89
-++#: ../netstat.c:1515 ../route.c:89
-++#, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+@@ -1165,112 +1138,126 @@ msgstr ""
-+ "         -F, --fib                zobrazí Forwarding Infomation Base\n"
-+ "                                  (implicitní)\n"
-+ 
-+-#: ../netstat.c:1446 ../route.c:90
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+ msgstr "         -C, --cache              místo FIB zobrazí smìrovací cache\n"
-+ 
-+-#: ../netstat.c:1448
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+-"  <Soket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Soket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ 
-+-#: ../netstat.c:1449 ../route.c:92
-+-#, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-++#: ../netstat.c:1519
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr "   <AF>=Pou¾ijte '-A <af>' or '--<af>' Implicitní: %s\n"
-+ 
-+-#: ../netstat.c:1450 ../route.c:93
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+ msgstr "  Seznam mo¾ných tøíd adres (podporujících smìrování):\n"
-+ 
-+-#: ../netstat.c:1663
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr "Aktivní Internetová spojení "
-+ 
-+-#: ../netstat.c:1673
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ "\n"
-+ "Proto Pøích-F Odch-F Místní Adresa          Vzdálená Adresa         Stav     "
-+ 
-+-#: ../netstat.c:1675
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr " U¾ivatel   I-uzel    "
-+ 
-+-#: ../netstat.c:1678
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr " Èasovaè"
-+ 
-+-#: ../netstat.c:1708
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+ msgstr "Èlenství v IPv4 skupinách\n"
-+ 
-+-#: ../netstat.c:1709
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr "Rozhraní        Èítaè  Skupina\n"
-+ 
-+-#: ../rarp.c:43
-++#: ../rarp.c:44
-+ msgid "This kernel does not support RARP.\n"
-+ msgstr "Toto jádro nepodporuje RARP.\n"
-+ 
-+-#: ../rarp.c:82
-++#: ../rarp.c:83
-+ #, c-format
-+ msgid "no RARP entry for %s.\n"
-+ msgstr "pro %s neexistuje RARP polo¾ka.\n"
-+ 
-+-#: ../rarp.c:95
-++#: ../rarp.c:96
-+ #, c-format
-+ msgid "%s: bad hardware address\n"
-+ msgstr "hardwarová adresa %s je nesprávná\n"
-+ 
-+-#: ../rarp.c:127
-++#: ../rarp.c:128
-+ #, c-format
-+ msgid "rarp: cannot open file %s:%s.\n"
-+ msgstr "rarp: soubor %s:%s nelze otevøít.\n"
-+ 
-+-#: ../rarp.c:139
-++#: ../rarp.c:140
-+ #, c-format
-+ msgid "rarp: format error at %s:%u\n"
-+ msgstr "rarp: syntaktická chyba na øádku %2$u souboru %1$s\n"
-+ 
-+-#: ../rarp.c:143 ../rarp.c:287
-++#: ../rarp.c:144 ../rarp.c:289
-+ #, c-format
-+ msgid "rarp: %s: unknown host\n"
-+ msgstr "rarp: poèítaè %s není znám\n"
-+ 
-+-#: ../rarp.c:146
-++#: ../rarp.c:147
-+ #, c-format
-+ msgid "rarp: cannot set entry from %s:%u\n"
-+ msgstr "rarp: nelze nastavit polo¾ku z øádku %2$u souboru %1$s\n"
-+ 
-+-#: ../rarp.c:175
-++#: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+ msgstr "Pou¾ití: rarp -a                            vypí¹e polo¾ky z cache.\n"
-+ 
-+-#: ../rarp.c:176
-++#: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+ msgstr "         rarp -d <jméno>                    sma¾e polo¾ku z cache.\n"
-+ 
-+-#: ../rarp.c:177
-++#: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+ msgstr ""
-+ "         rarp [<HW>] -s <jméno> <hwadr>       pøidá polo¾ku do cache.\n"
-+ 
-+-#: ../rarp.c:178
-++#: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+ msgstr ""
-+ "         rarp -f                               pøidá polo¾ky z /etc/ethers.\n"
-+ 
-+-#: ../rarp.c:179
-++#: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+@@ -1279,24 +1266,26 @@ msgstr ""
-+ "programu.\n"
-+ "\n"
-+ 
-+-#: ../rarp.c:236
-++#: ../rarp.c:238
-+ #, c-format
-+ msgid "%s: illegal option mix.\n"
-+ msgstr "Kombinace pøepínaèù %s je nesprávná.\n"
-+ 
-+-#: ../rarp.c:267
-++#: ../rarp.c:269
-+ #, c-format
-+ msgid "rarp: %s: unknown hardware type.\n"
-+ msgstr "rarp: hardwarový typ %s není znám.\n"
-+ 
-+-#: ../route.c:79
-++#: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+ "Pou¾ití: route [-nNvee] [-FC] [<AF>]         Zobrazí smìrovací tabulky v "
-+ "jádru\n"
-+ 
-+-#: ../route.c:80
-++#: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+@@ -1305,14 +1294,16 @@ msgstr ""
-+ "AF.\n"
-+ "\n"
-+ 
-+-#: ../route.c:82
-++#: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+ msgstr ""
-+ "       route {-h|--help [<AF>]               Nápovìda pro pou¾ití s AF.\n"
-+ 
-+-#: ../route.c:83
-++#: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+@@ -1321,15 +1312,23 @@ msgstr ""
-+ "       route {-V|--version}                  Vypí¹e oznaèení verze a autora\n"
-+ "                                             programu.\n"
-+ 
-++#: ../route.c:92
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "   <AF>=Pou¾ijte '-A <af>' or '--<af>' Implicitní: %s\n"
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr "Pou¾ití: plipconfig [-a] [-i] [-v] rozhraní\n"
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr "                  [nibble NN] [trigger NN]\n"
-+ 
-+ #: ../plipconfig.c:68
-++#, c-format
-+ msgid "       plipconfig -V | --version\n"
-+ msgstr "       plipconfig -V | --version\n"
-+ 
-+@@ -1338,25 +1337,30 @@ msgstr "       plipconfig -V | --version
-+ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr "%s\tnibble %lu  trigger %lu\n"
-+ 
-+-#: ../iptunnel.c:79
-++#: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr "Pou¾ití: iptunnel { add | change | del | show } [ JMÉNO ]\n"
-+ 
-+-#: ../iptunnel.c:80
-++#: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+ msgstr ""
-+ "          [ mode { ipip | gre | sit } ] [ vzdálená ADR ] [ místní ADR ]\n"
-+ 
-+-#: ../iptunnel.c:81
-++#: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr "          [ [i|o]seq ] [ [i|o]key KLÍÈ ] [ [i|o]csum ]\n"
-+ 
-+-#: ../iptunnel.c:82
-++#: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+ msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev ZAØÍZENÍ ]\n"
-+ 
-+-#: ../iptunnel.c:83
-++#: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+@@ -1364,450 +1368,737 @@ msgstr ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+ 
-+-#: ../iptunnel.c:84
-++#: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr "Kde: JMÉNO := ØETÌZEC\n"
-+ 
-+-#: ../iptunnel.c:85
-++#: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr "       ADR := { IP-ADRESA | any }\n"
-+ 
-+-#: ../iptunnel.c:86
-++#: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr "       TOS  := { ÈÍSLO | inherit }\n"
-+ 
-+-#: ../iptunnel.c:87
-++#: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr "       TTL  := { 1..255 | inherit }\n"
-+ 
-+-#: ../iptunnel.c:88
-++#: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr "       KLÍÈ  := { DOTTED_QUAD | ÈÍSLO }\n"
-+ 
-+-#: ../iptunnel.c:326
-++#: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr "S ipip a sit nejsou klíèe povoleny.\n"
-+ 
-+-#: ../iptunnel.c:346
-++#: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr "Tunel se v¹esmìrovým vysíláním vy¾aduje zdrojovou adresu.\n"
-+ 
-+-#: ../iptunnel.c:361
-++#: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr "ttl != 0 a noptmudisc se navzájem vyluèují\n"
-+ 
-+-#: ../iptunnel.c:373
-++#: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr "re¾im tunelu (ipip, gre èi sit) nelze zjistit\n"
-+ 
-+-#: ../iptunnel.c:411
-++#: ../iptunnel.c:417
-+ #, c-format
-+ msgid "%s: %s/ip  remote %s  local %s "
-+ msgstr "%s: %s/ip  vzdálený %s  místní %s "
-+ 
-+-#: ../iptunnel.c:415
-++#: ../iptunnel.c:421
-+ msgid "unknown"
-+ msgstr "Neznám."
-+ 
-+-#: ../iptunnel.c:447
-++#: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr "  Zahazuje pakety mimo poøadí.\n"
-+ 
-+-#: ../iptunnel.c:449
-++#: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr "  Pøijímané pakety musí mít kontrolní souèet.\n"
-+ 
-+ # ???
-+-#: ../iptunnel.c:451
-++#: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr "  Øadí odchozí pakety.\n"
-+ 
-+-#: ../iptunnel.c:453
-++#: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr "  Odchozí pakety budou mít kontrolní souèet.\n"
-+ 
-+-#: ../iptunnel.c:481
-++#: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+ msgstr "Lituji, formát /proc/net/dev je chybný.\n"
-+ 
-+-#: ../iptunnel.c:494
-++#: ../iptunnel.c:500
-+ #, c-format
-+ msgid "Failed to get type of [%s]\n"
-+ msgstr "Typ [%s] se nepodaøilo zjistit.\n"
-+ 
-+-#: ../iptunnel.c:510
-++#: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr "RX: Pakety     Bajty        Chyby  CsumChyb MimoPoø  Mcasts\n"
-+ 
-+-#: ../iptunnel.c:513
-++#: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr "TX: Pakety     Bajty        Chyby  DeadLoop NoRoute  NoBufs\n"
-+ 
-+-#: ../statistics.c:45
-++#: ../statistics.c:47
-+ msgid "ICMP input histogram:"
-+ msgstr "histogram ICMP vstupu:"
-+ 
-+-#: ../statistics.c:46
-++#: ../statistics.c:48
-+ msgid "ICMP output histogram:"
-+ msgstr "histogram ICMP výstupu:"
-+ 
-+-#: ../statistics.c:63
-++#: ../statistics.c:65
-+ #, c-format
-+ msgid "Forwarding is %s"
-+ msgstr "Pøedávání je %s"
-+ 
-+-#: ../statistics.c:64
-+-#, c-format
-+-msgid "Default TTL is %d"
-++#: ../statistics.c:66
-++#, fuzzy, c-format
-++msgid "Default TTL is %u"
-+ msgstr "Implicitní TTL je %d"
-+ 
-+-#: ../statistics.c:65
-+-#, c-format
-+-msgid "%d total packets received"
-++#: ../statistics.c:67
-++#, fuzzy, c-format
-++msgid "%u total packets received"
-+ msgstr "celkem pøijmutých paketù: %d"
-+ 
-+-#: ../statistics.c:66
-+-#, c-format
-+-msgid "%d with invalid headers"
-++#: ../statistics.c:68
-++#, fuzzy, c-format
-++msgid "%u with invalid headers"
-+ msgstr "s nesprávnými hlavièkami: %d"
-+ 
-+-#: ../statistics.c:67
-+-#, c-format
-+-msgid "%d with invalid addresses"
-++#: ../statistics.c:69
-++#, fuzzy, c-format
-++msgid "%u with invalid addresses"
-+ msgstr "s nesprávnými adresami: %d"
-+ 
-+-#: ../statistics.c:68
-+-#, c-format
-+-msgid "%d forwarded"
-++#: ../statistics.c:70
-++#, fuzzy, c-format
-++msgid "%u forwarded"
-+ msgstr "pøedáno: %d"
-+ 
-+-#: ../statistics.c:69
-+-#, c-format
-+-msgid "%d with unknown protocol"
-++#: ../statistics.c:71
-++#, fuzzy, c-format
-++msgid "%u with unknown protocol"
-+ msgstr "s neznámým protokolem: %d"
-+ 
-+-#: ../statistics.c:70
-+-#, c-format
-+-msgid "%d incoming packets discarded"
-++#: ../statistics.c:72
-++#, fuzzy, c-format
-++msgid "%u incoming packets discarded"
-+ msgstr "poèet zahozených pøíchozích paketù: %d"
-+ 
-+-#: ../statistics.c:71
-+-#, c-format
-+-msgid "%d incoming packets delivered"
-++#: ../statistics.c:73
-++#, fuzzy, c-format
-++msgid "%u incoming packets delivered"
-+ msgstr "poèet doruèených pøíchozích paketù: %d"
-+ 
-+-#: ../statistics.c:72
-+-#, c-format
-+-msgid "%d requests sent out"
-++#: ../statistics.c:74
-++#, fuzzy, c-format
-++msgid "%u requests sent out"
-+ msgstr "poèet odeslaných po¾adavkù: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:73
-+-#, c-format
-+-msgid "%d outgoing packets dropped"
-++#: ../statistics.c:75
-++#, fuzzy, c-format
-++msgid "%u outgoing packets dropped"
-+ msgstr "poèet zahozených odchozích paketù: %d"
-+ 
-+-#: ../statistics.c:74
-+-#, c-format
-+-msgid "%d dropped because of missing route"
-++#: ../statistics.c:76
-++#, fuzzy, c-format
-++msgid "%u dropped because of missing route"
-+ msgstr "zahozeno kvùli chybìjící cestì: %d"
-+ 
-+-#: ../statistics.c:75
-+-#, c-format
-+-msgid "%d fragments dropped after timeout"
-++#: ../statistics.c:77
-++#, fuzzy, c-format
-++msgid "%u fragments dropped after timeout"
-+ msgstr "poèet fragmentù zahozených po vypr¹ení èasu: %d"
-+ 
-+-#: ../statistics.c:76
-+-#, c-format
-+-msgid "%d reassemblies required"
-++#: ../statistics.c:78
-++#, fuzzy, c-format
-++msgid "%u reassemblies required"
-+ msgstr "poèet nutných znovusestavení: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:77
-+-#, c-format
-+-msgid "%d packets reassembled ok"
-++#: ../statistics.c:79
-++#, fuzzy, c-format
-++msgid "%u packets reassembled ok"
-+ msgstr "poèet v poøádku znovu sestavených paketù: %d"
-+ 
-+-#: ../statistics.c:78
-+-#, c-format
-+-msgid "%d packet reassembles failed"
-++#: ../statistics.c:80
-++#, fuzzy, c-format
-++msgid "%u packet reassembles failed"
-+ msgstr "poèet paketù, je¾ se nepodaøilo znovu sestavit: %d"
-+ 
-+-#: ../statistics.c:79
-+-#, c-format
-+-msgid "%d fragments received ok"
-++#: ../statistics.c:81
-++#, fuzzy, c-format
-++msgid "%u fragments received ok"
-+ msgstr "poèet v poøádku pøijmutých fragmentù: %d"
-+ 
-+-#: ../statistics.c:80
-+-#, c-format
-+-msgid "%d fragments failed"
-++#: ../statistics.c:82
-++#, fuzzy, c-format
-++msgid "%u fragments failed"
-+ msgstr "poèet chybných fragmentù: %d"
-+ 
-+-#: ../statistics.c:81
-+-#, c-format
-+-msgid "%d fragments created"
-++#: ../statistics.c:83
-++#, fuzzy, c-format
-++msgid "%u fragments created"
-+ msgstr "poèet vytvoøených fragmentù: %d"
-+ 
-+-#: ../statistics.c:86
-+-#, c-format
-+-msgid "%d ICMP messages received"
-++#: ../statistics.c:88
-++#, fuzzy, c-format
-++msgid "%u ICMP messages received"
-+ msgstr "poèet pøijmutých ICMP zpráv: %d"
-+ 
-+-#: ../statistics.c:87
-+-#, c-format
-+-msgid "%d input ICMP message failed."
-++#: ../statistics.c:89
-++#, fuzzy, c-format
-++msgid "%u input ICMP message failed."
-+ msgstr "poèet chybných pøíchozích ICMP zpráv: %d"
-+ 
-+-#: ../statistics.c:88 ../statistics.c:101
-+-#, c-format
-+-msgid "destination unreachable: %d"
-++#: ../statistics.c:90 ../statistics.c:103
-++#, fuzzy, c-format
-++msgid "destination unreachable: %u"
-+ msgstr "adresát nedostupný: %d"
-+ 
-+-#: ../statistics.c:89
-+-#, c-format
-+-msgid "timeout in transit: %d"
-++#: ../statistics.c:91
-++#, fuzzy, c-format
-++msgid "timeout in transit: %u"
-+ msgstr "vypr¹el èas pøi pøenosu: %d"
-+ 
-+-#: ../statistics.c:90 ../statistics.c:103
-+-#, c-format
-+-msgid "wrong parameters: %d"
-++#: ../statistics.c:92 ../statistics.c:105
-++#, fuzzy, c-format
-++msgid "wrong parameters: %u"
-+ msgstr "chybné parametry: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:91
-+-#, c-format
-+-msgid "source quenchs: %d"
-++#: ../statistics.c:93
-++#, fuzzy, c-format
-++msgid "source quenches: %u"
-+ msgstr "øízení toku dat: %d"
-+ 
-+-#: ../statistics.c:92
-+-#, c-format
-+-msgid "redirects: %d"
-++#: ../statistics.c:94
-++#, fuzzy, c-format
-++msgid "redirects: %u"
-+ msgstr "zmìna cesty: %d"
-+ 
-+-#: ../statistics.c:93
-+-#, c-format
-+-msgid "echo requests: %d"
-++#: ../statistics.c:95
-++#, fuzzy, c-format
-++msgid "echo requests: %u"
-+ msgstr "¾ádost o echo: %d"
-+ 
-+-#: ../statistics.c:94 ../statistics.c:107
-+-#, c-format
-+-msgid "echo replies: %d"
-++#: ../statistics.c:96 ../statistics.c:109
-++#, fuzzy, c-format
-++msgid "echo replies: %u"
-+ msgstr "odpovìï na ¾ádost o echo: %d"
-+ 
-+-#: ../statistics.c:95
-+-#, c-format
-+-msgid "timestamp request: %d"
-++#: ../statistics.c:97
-++#, fuzzy, c-format
-++msgid "timestamp request: %u"
-+ msgstr "¾ádost o èas: %d"
-+ 
-+-#: ../statistics.c:96
-+-#, c-format
-+-msgid "timestamp reply: %d"
-++#: ../statistics.c:98
-++#, fuzzy, c-format
-++msgid "timestamp reply: %u"
-+ msgstr "odpovìï na ¾ádost o èas: %d"
-+ 
-+-#: ../statistics.c:97
-+-#, c-format
-+-msgid "address mask request: %d"
-++#: ../statistics.c:99
-++#, fuzzy, c-format
-++msgid "address mask request: %u"
-+ msgstr "¾ádost o masku podsítì: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:98
-+-msgid "address mask replies"
-+-msgstr "odpovìdi na ¾ádost o masku podsítì"
-++#: ../statistics.c:100 ../statistics.c:113
-++#, fuzzy, c-format
-++msgid "address mask replies: %u"
-++msgstr "odpovìï na ¾ádost o masku podsítì: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:99
-+-#, c-format
-+-msgid "%d ICMP messages sent"
-++#: ../statistics.c:101
-++#, fuzzy, c-format
-++msgid "%u ICMP messages sent"
-+ msgstr "poèet odeslaných ICMP zpráv: %d"
-+ 
-+-#: ../statistics.c:100
-+-#, c-format
-+-msgid "%d ICMP messages failed"
-++#: ../statistics.c:102
-++#, fuzzy, c-format
-++msgid "%u ICMP messages failed"
-+ msgstr "poèet chybných ICMP zpráv: %d"
-+ 
-+-#: ../statistics.c:102
-+-#, c-format
-+-msgid "time exceeded: %d"
-++#: ../statistics.c:104
-++#, fuzzy, c-format
-++msgid "time exceeded: %u"
-+ msgstr "vypr¹ení ¾ivotnosti: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:104
-+-#, c-format
-+-msgid "source quench: %d"
-++#: ../statistics.c:106
-++#, fuzzy, c-format
-++msgid "source quench: %u"
-+ msgstr "øízení toku dat: %d"
-+ 
-+-#: ../statistics.c:105
-+-#, c-format
-+-msgid "redirect: %d"
-++#: ../statistics.c:107
-++#, fuzzy, c-format
-++msgid "redirect: %u"
-+ msgstr "zmìna cesty: %d"
-+ 
-+-#: ../statistics.c:106
-+-#, c-format
-+-msgid "echo request: %d"
-++#: ../statistics.c:108
-++#, fuzzy, c-format
-++msgid "echo request: %u"
-+ msgstr "¾ádost o echo: %d"
-+ 
-+-#: ../statistics.c:108
-+-#, c-format
-+-msgid "timestamp requests: %d"
-++#: ../statistics.c:110
-++#, fuzzy, c-format
-++msgid "timestamp requests: %u"
-+ msgstr "¾ádost o èas: %d"
-+ 
-+-#: ../statistics.c:109
-+-#, c-format
-+-msgid "timestamp replies: %d"
-++#: ../statistics.c:111
-++#, fuzzy, c-format
-++msgid "timestamp replies: %u"
-+ msgstr "odpovìï na ¾ádost o èas: %d"
-+ 
-+-#: ../statistics.c:110
-+-#, c-format
-+-msgid "address mask requests: %d"
-++#: ../statistics.c:112
-++#, fuzzy, c-format
-++msgid "address mask requests: %u"
-+ msgstr "¾ádost o masku podsítì: %d"
-+ 
-+-#: ../statistics.c:111
-+-#, c-format
-+-msgid "address mask replies: %d"
-+-msgstr "odpovìï na ¾ádost o masku podsítì: %d"
-+-
-+-#: ../statistics.c:116
-++#: ../statistics.c:118
-+ #, c-format
-+ msgid "RTO algorithm is %s"
-+ msgstr "RTO algoritmus je %s"
-+ 
-+-#: ../statistics.c:120
-+-#, c-format
-+-msgid "%d active connections openings"
-++#: ../statistics.c:122
-++#, fuzzy, c-format
-++msgid "%u active connections openings"
-+ msgstr "poèet aktivnì navázaných spojení: %d"
-+ 
-+-#: ../statistics.c:121
-+-#, c-format
-+-msgid "%d passive connection openings"
-++#: ../statistics.c:123
-++#, fuzzy, c-format
-++msgid "%u passive connection openings"
-+ msgstr "poèet pasivnì navázaných spojení: %d"
-+ 
-+-#: ../statistics.c:122
-+-#, c-format
-+-msgid "%d failed connection attempts"
-++#: ../statistics.c:124
-++#, fuzzy, c-format
-++msgid "%u failed connection attempts"
-+ msgstr "poèet neúspì¹ných pokusù o spojení: %d"
-+ 
-+-#: ../statistics.c:123
-+-#, c-format
-+-msgid "%d connection resets received"
-++#: ../statistics.c:125
-++#, fuzzy, c-format
-++msgid "%u connection resets received"
-+ msgstr "poèet pøijmutých resetù: %d"
-+ 
-+-#: ../statistics.c:124
-+-#, c-format
-+-msgid "%d connections established"
-++#: ../statistics.c:126
-++#, fuzzy, c-format
-++msgid "%u connections established"
-+ msgstr "poèet navázaných spojení: %d"
-+ 
-+-#: ../statistics.c:125
-+-#, c-format
-+-msgid "%d segments received"
-++#: ../statistics.c:127
-++#, fuzzy, c-format
-++msgid "%u segments received"
-+ msgstr "poèet pøijmutých segmentù: %d"
-+ 
-+-#: ../statistics.c:126
-+-#, c-format
-+-msgid "%d segments send out"
-++#: ../statistics.c:128
-++#, fuzzy, c-format
-++msgid "%u segments send out"
-+ msgstr "poèet odeslaných segmentù: %d"
-+ 
-+-#: ../statistics.c:127
-+-#, c-format
-+-msgid "%d segments retransmited"
-++#: ../statistics.c:129
-++#, fuzzy, c-format
-++msgid "%u segments retransmited"
-+ msgstr "poèet pøenesených segmentù: %d"
-+ 
-+-#: ../statistics.c:128
-+-#, c-format
-+-msgid "%d bad segments received."
-++#: ../statistics.c:130
-++#, fuzzy, c-format
-++msgid "%u bad segments received."
-+ msgstr "poèet chybných pøíchozích segmentù: %d."
-+ 
-+-#: ../statistics.c:129
-+-#, c-format
-+-msgid "%d resets sent"
-++#: ../statistics.c:131
-++#, fuzzy, c-format
-++msgid "%u resets sent"
-+ msgstr "poèet odeslaných resetù: %d"
-+ 
-+-#: ../statistics.c:134
-+-#, c-format
-+-msgid "%d packets received"
-++#: ../statistics.c:136
-++#, fuzzy, c-format
-++msgid "%u packets received"
-+ msgstr "poèet pøijmutých paketù: %d"
-+ 
-+-#: ../statistics.c:135
-+-#, c-format
-+-msgid "%d packets to unknown port received."
-++#: ../statistics.c:137
-++#, fuzzy, c-format
-++msgid "%u packets to unknown port received."
-+ msgstr "poèet paketù pøijmutých pro neznámý port: %d."
-+ 
-+-#: ../statistics.c:136
-+-#, c-format
-+-msgid "%d packet receive errors"
-++#: ../statistics.c:138
-++#, fuzzy, c-format
-++msgid "%u packet receive errors"
-+ msgstr "poèet chyb pøi pøíjmu paketù: %d"
-+ 
-+-#: ../statistics.c:137
-+-#, c-format
-+-msgid "%d packets sent"
-++#: ../statistics.c:139
-++#, fuzzy, c-format
-++msgid "%u packets sent"
-+ msgstr "poèet odeslaných paketù: %d"
-+ 
-+-#: ../statistics.c:142
-+-#, c-format
-+-msgid "%d SYN cookies sent"
-++#: ../statistics.c:144
-++#, fuzzy, c-format
-++msgid "%u SYN cookies sent"
-+ msgstr "poèet odeslaných SYN cookies: %d"
-+ 
-+-#: ../statistics.c:143
-+-#, c-format
-+-msgid "%d SYN cookies received"
-++#: ../statistics.c:145
-++#, fuzzy, c-format
-++msgid "%u SYN cookies received"
-+ msgstr "poèet pøijmutých SYN cookies: %d"
-+ 
-+-#: ../statistics.c:144
-+-#, c-format
-+-msgid "%d invalid SYN cookies received"
-++#: ../statistics.c:146
-++#, fuzzy, c-format
-++msgid "%u invalid SYN cookies received"
-+ msgstr "poèet chybných pøíchozích SYN cookies: %d"
-+ 
-+-#: ../statistics.c:146
-+-#, c-format
-+-msgid "%d resets received for embryonic SYN_RECV sockets"
-++#: ../statistics.c:148
-++#, fuzzy, c-format
-++msgid "%u resets received for embryonic SYN_RECV sockets"
-+ msgstr "poèet resetù pøijmutých pro sokety ve stavu SYN_PØÍCH: %d"
-+ 
-+-#: ../statistics.c:148
-+-#, c-format
-+-msgid "%d packets pruned from receive queue because of socket buffer overrun"
-++#: ../statistics.c:150
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue because of socket buffer overrun"
-+ msgstr "poèet paketù odstranìných z fronty kvùli pøeteèení bufferu soketu: %d"
-+ 
-+ #. obsolete: 2.2.0 doesn't do that anymore
-+-#: ../statistics.c:151
-+-#, c-format
-+-msgid "%d packets pruned from out-of-order queue"
-++#: ../statistics.c:153
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue"
-+ msgstr "poèet paketù odstranìných z fronty mimo-poøadí: %d"
-+ 
-+-#: ../statistics.c:152
-+-#, c-format
-++#: ../statistics.c:154
-++#, fuzzy, c-format
-+ msgid ""
-+-"%d packets dropped from out-of-order queue because of socket buffer overrun"
-++"%u packets dropped from out-of-order queue because of socket buffer overrun"
-+ msgstr ""
-+ "poèet paketù zahozených z fronty mimo-poøadí kvùli pøeteèení bufferu soketu: "
-+ "%d"
-+ 
-+-#: ../statistics.c:154
-+-#, c-format
-+-msgid "%d ICMP packets dropped because they were out-of-window"
-++#: ../statistics.c:156
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because they were out-of-window"
-+ msgstr "poèet ICMP paketù zahozených, proto¾e byly mimo-okno: %d"
-+ 
-+-#: ../statistics.c:156
-+-#, c-format
-+-msgid "%d ICMP packets dropped because socket was locked"
-++#: ../statistics.c:158
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because socket was locked"
-+ msgstr "poèet ICMP paketù zahozených kvùli zamèenému soketu: %d"
-+ 
-++#: ../statistics.c:160
-++#, c-format
-++msgid "%u TCP sockets finished time wait in fast timer"
-++msgstr ""
-++
-++#: ../statistics.c:161
-++#, c-format
-++msgid "%u time wait sockets recycled by time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:162
-++#, c-format
-++msgid "%u TCP sockets finished time wait in slow timer"
-++msgstr ""
-++
-++#: ../statistics.c:163
-++#, c-format
-++msgid "%u passive connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:165
-++#, c-format
-++msgid "%u active connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:167
-++#, c-format
-++msgid "%u packets rejects in established connections because of timestamp"
-++msgstr ""
-++
-++#: ../statistics.c:169
-++#, fuzzy, c-format
-++msgid "%u delayed acks sent"
-++msgstr "poèet odeslaných paketù: %d"
-++
-++#: ../statistics.c:170
-++#, c-format
-++msgid "%u delayed acks further delayed because of locked socket"
-++msgstr ""
-++
-++#: ../statistics.c:172
-++#, c-format
-++msgid "Quick ack mode was activated %u times"
-++msgstr ""
-++
-++#: ../statistics.c:173
-++#, c-format
-++msgid "%u times the listen queue of a socket overflowed"
-++msgstr ""
-++
-++#: ../statistics.c:175
-++#, c-format
-++msgid "%u SYNs to LISTEN sockets ignored"
-++msgstr ""
-++
-++#: ../statistics.c:176
-++#, c-format
-++msgid "%u packets directly queued to recvmsg prequeue."
-++msgstr ""
-++
-++#: ../statistics.c:178
-++#, c-format
-++msgid "%u of bytes directly received from backlog"
-++msgstr ""
-++
-++#: ../statistics.c:180
-++#, c-format
-++msgid "%u of bytes directly received from prequeue"
-++msgstr ""
-++
-++#: ../statistics.c:182
-++#, fuzzy, c-format
-++msgid "%u packets dropped from prequeue"
-++msgstr "poèet paketù odstranìných z fronty mimo-poøadí: %d"
-++
-++#: ../statistics.c:183
-++#, fuzzy, c-format
-++msgid "%u packet headers predicted"
-++msgstr "poèet pøijmutých paketù: %d"
-++
-++#: ../statistics.c:184
-++#, c-format
-++msgid "%u packets header predicted and directly queued to user"
-++msgstr ""
-++
-++#: ../statistics.c:186
-++#, c-format
-++msgid "Ran %u times out of system memory during packet sending"
-++msgstr ""
-++
-++#: ../statistics.c:188
-++#, fuzzy, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr "poèet paketù pøijmutých pro neznámý port: %d."
-++
-++#: ../statistics.c:189
-++#, c-format
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-++
-++#: ../statistics.c:192
-++#, fuzzy, c-format
-++msgid "%u bad SACKs received"
-++msgstr "poèet chybných pøíchozích segmentù: %d."
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:197
-++#, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr ""
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr ""
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, fuzzy, c-format
-++msgid "%u retransmits lost"
-++msgstr "poèet odeslaných resetù: %d"
-++
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, fuzzy, c-format
-++msgid "%u fast retransmits"
-++msgstr "poèet pøenesených segmentù: %d"
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, fuzzy, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "poèet pøenesených segmentù: %d"
-++
-++#: ../statistics.c:210
-++#, fuzzy, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "poèet paketù, je¾ se nepodaøilo znovu sestavit: %d"
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, fuzzy, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr "poèet paketù odstranìných z fronty kvùli pøeteèení bufferu soketu: %d"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, fuzzy, c-format
-++msgid "%u DSACKs received"
-++msgstr "poèet pøijmutých paketù: %d"
-++
-++#: ../statistics.c:216
-++#, fuzzy, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "celkem pøijmutých paketù: %d"
-++
-++#: ../statistics.c:217
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "poèet pøijmutých resetù: %d"
-++
-++#: ../statistics.c:218
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "poèet pøijmutých resetù: %d"
-++
-++#: ../statistics.c:219
-++#, fuzzy, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "poèet pøijmutých resetù: %d"
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, fuzzy, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "poèet pøijmutých resetù: %d"
-++
-+ #: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr "zapnuto"
-+ 
-+-#: ../statistics.c:222
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr "vypnuto"
-+ 
-+-#: ../statistics.c:272
-+-#, c-format
-+-msgid "unknown title %s\n"
-+-msgstr "titulek %s je neznámý\n"
-+-
-+-#: ../statistics.c:298
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr "chyba pøi zpracování /proc/net/snmp"
-+ 
-+-#: ../statistics.c:311
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr "/proc/net/snmp nelze otevøít"
-+ 
-+@@ -1821,89 +2112,95 @@ msgstr "Hardwarový typ `%s' není podporo
-+ msgid "Cannot change line discipline to `%s'.\n"
-+ msgstr "Linkovou disciplínu nelze na `%s' zmìnit.\n"
-+ 
-+-#: ../lib/af.c:145 ../lib/hw.c:148
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr "NEZNÁM"
-+ 
-+-#: ../lib/af.c:147
-++#: ../lib/af.c:155
-+ msgid "UNIX Domain"
-+ msgstr "Doména UNIX"
-+ 
-+-#: ../lib/af.c:150
-++#: ../lib/af.c:158
-+ msgid "DARPA Internet"
-+ msgstr "DARPA Internet"
-+ 
-+-#: ../lib/af.c:153
-++#: ../lib/af.c:161
-+ msgid "IPv6"
-+ msgstr "IPv6"
-+ 
-+-#: ../lib/af.c:156 ../lib/hw.c:169
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr "AMPR AX.25"
-+ 
-+-#: ../lib/af.c:159 ../lib/hw.c:175
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr "AMPR NET/ROM"
-+ 
-+-#: ../lib/af.c:162
-++#: ../lib/af.c:170
-+ msgid "Novell IPX"
-+ msgstr "Novell IPX"
-+ 
-+-#: ../lib/af.c:165
-++#: ../lib/af.c:173
-+ msgid "Appletalk DDP"
-+ msgstr "Appletalk DDP"
-+ 
-+-#: ../lib/af.c:168 ../lib/hw.c:207
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr "Econet"
-+ 
-+-#: ../lib/af.c:171 ../lib/hw.c:172
-++#: ../lib/af.c:179
-++msgid "CCITT X.25"
-++msgstr ""
-++
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr "AMPR ROSE"
-+ 
-+-#: ../lib/af.c:174 ../lib/hw.c:160
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr "Ash"
-+ 
-+-#: ../lib/af.c:232
-++#: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr "Nezadávejte více ne¾ jednu tøídu adres.\n"
-+ 
-+-#: ../lib/af.c:293
-++#: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr "Bylo zadáno pøíli¹ mnoho tøíd adres.\n"
-+ 
-+-#: ../lib/af.c:304
-++#: ../lib/af.c:315
-+ #, c-format
-+ msgid "Unknown address family `%s'.\n"
-+ msgstr "Tøída adres `%s' není známa.\n"
-+ 
-+-#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
-+-#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
-+-#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
-+-#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
-+-msgid "[NONE SET]"
-+-msgstr "[NENASTAVENO]"
-+-
-+-#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-++#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-+ #, c-format
-+ msgid "in_arcnet(%s): invalid arcnet address!\n"
-+ msgstr "in_arcnet(%s): chybná arcnet adresa!\n"
-+ 
-+-#: ../lib/arcnet.c:108
-++#: ../lib/arcnet.c:97
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing : ignored!\n"
-+ msgstr "in_arcnet(%s): nadbyteèné : ignorováno!\n"
-+ 
-+-#: ../lib/arcnet.c:120
-++#: ../lib/arcnet.c:109
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr "in_arcnet(%s): nadbyteèné znaky!\n"
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+ msgstr "Chybná Ash adresa"
-+ 
-++#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-++#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-++#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-++msgid "[NONE SET]"
-++msgstr "[NENASTAVENO]"
-++
-+ #: ../lib/ax25.c:97 ../lib/netrom.c:100
-+ msgid "Invalid callsign"
-+ msgstr "Nesprávný volací znak"
-+@@ -1913,22 +2210,21 @@ msgid "Callsign too long"
-+ msgstr "Volací znak je pøíli¹ dlouhý."
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr "AX.25 není na tomto systému nakonfigurováno.\n"
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro AX.25\n"
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr "Adresát      Rozhraní U¾ití\n"
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr "Smìrovací tabulka pro `ddp' není zatím podporována.\n"
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1944,153 +2240,171 @@ msgstr "in_ether(%s): nadbyteèné : ignor
-+ msgid "in_ether(%s): trailing junk!\n"
-+ msgstr "in_ether(%s): nadbyteèné znaky!\n"
-+ 
-+-#: ../lib/fddi.c:95 ../lib/fddi.c:110
-++#: ../lib/fddi.c:84 ../lib/fddi.c:99
-+ #, c-format
-+ msgid "in_fddi(%s): invalid fddi address!\n"
-+ msgstr "in_fddi(%s): chybná fddi adresa!\n"
-+ 
-+-#: ../lib/fddi.c:122
-++#: ../lib/fddi.c:111
-+ #, c-format
-+ msgid "in_fddi(%s): trailing : ignored!\n"
-+ msgstr "in_fddi(%s): nadbyteèné : ignorováno!\n"
-+ 
-+-#: ../lib/fddi.c:134
-++#: ../lib/fddi.c:123
-+ #, c-format
-+ msgid "in_fddi(%s): trailing junk!\n"
-+ msgstr "in_fddi(%s): nadbyteèné znaky!\n"
-+ 
-+-#: ../lib/getroute.c:97 ../lib/setroute.c:76
-++#: ../lib/getroute.c:101 ../lib/setroute.c:80
-+ #, c-format
-+ msgid "Address family `%s' not supported.\n"
-+ msgstr "Tøída adres `%s' není podporována.\n"
-+ 
-+-#: ../lib/getroute.c:103 ../lib/setroute.c:80
-++#: ../lib/getroute.c:107 ../lib/setroute.c:84
-+ #, c-format
-+ msgid "No routing for address family `%s'.\n"
-+ msgstr "Pro tøídu adres `%s' není ¾ádné smìrování.\n"
-+ 
-+-#: ../lib/hippi.c:96 ../lib/hippi.c:111
-++#: ../lib/hippi.c:84 ../lib/hippi.c:99
-+ #, c-format
-+ msgid "in_hippi(%s): invalid hippi address!\n"
-+ msgstr "in_hippi(%s): chybná hippi adresa!\n"
-+ 
-+-#: ../lib/hippi.c:123
-++#: ../lib/hippi.c:111
-+ #, c-format
-+ msgid "in_hippi(%s): trailing : ignored!\n"
-+ msgstr "in_hippi(%s): nadbyteèné : ignorováno!\n"
-+ 
-+-#: ../lib/hippi.c:134
-++#: ../lib/hippi.c:122
-+ #, c-format
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr "in_hippi(%s): nadbyteèné znaky!\n"
-+ 
-+-#: ../lib/hw.c:147
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr "Místní smyèka"
-+ 
-+-#: ../lib/hw.c:150
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr "IP po sériové lince"
-+ 
-+-#: ../lib/hw.c:151
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr "Vj IP po sériové lince"
-+ 
-+-#: ../lib/hw.c:152
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr "6bitový IP po sériové lince"
-+ 
-+-#: ../lib/hw.c:153
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr "6bitový VJ IP po sériové lince"
-+ 
-+-#: ../lib/hw.c:154
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr "Adaptivní IP po sériové lince"
-+ 
-+-#: ../lib/hw.c:157
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr "Ethernet"
-+ 
-+-#: ../lib/hw.c:163
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr "Fiber Distributed Data Interface"
-+ 
-+-#: ../lib/hw.c:166
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr "HIPPI"
-+ 
-+-#: ../lib/hw.c:178
-++#: ../lib/hw.c:191
-++msgid "generic X.25"
-++msgstr ""
-++
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr "IPIP Tunnel"
-+ 
-+-#: ../lib/hw.c:181
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+ msgstr "Point-to-Point Protokol"
-+ 
-+-#: ../lib/hw.c:184
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr "(Cisco)-HDLC"
-+ 
-+-#: ../lib/hw.c:185
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:188
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr "ARCnet"
-+ 
-+-#: ../lib/hw.c:191
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr "Frame Relay DLCI"
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr "Pøístupové zaøízení Frame Relay"
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr "IPv6-in-IPv4"
-+ 
-+-#: ../lib/hw.c:198
-++#: ../lib/hw.c:214
-+ msgid "IrLAP"
-+ msgstr "IrLAP"
-+ 
-+-#: ../lib/hw.c:201
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr "Token Ring 16/4 Mb/s"
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:219
-+ #, fuzzy
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr "Token Ring 16/4 Mb/s"
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+ msgstr "rresolve: tøída adres %d není podporována!\n"
-+ 
-+-#: ../lib/inet6_gr.c:79
-++#: ../lib/inet6.c:131
-++#, fuzzy
-++msgid "[UNKNOWN]"
-++msgstr "NEZNÁM"
-++
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr "INET6 (IPv6) není na tomto systému nakonfigurováno.\n"
-+ 
-+-#: ../lib/inet6_gr.c:82
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro IPv6\n"
-+ 
-+-#: ../lib/inet6_gr.c:84
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-+ msgstr ""
-+-"Adresát                                     Dal¹í Smìrovaè                   "
-+-"       Pøízn Metrika Odkaz U¾it Rozhraní\n"
-++"Adresát                                     Dal¹í "
-++"Smìrovaè                          Pøízn Metrika Odkaz U¾it Rozhraní\n"
-+ 
-+-#: ../lib/inet6_gr.c:158
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr "Cache sousedù v jádru pro IPv6\n"
-+ 
-+-#: ../lib/inet6_gr.c:161
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+@@ -2098,7 +2412,8 @@ msgstr ""
-+ "Soused                                      HW Adresa         Rozhraní Pøízn "
-+ "Odkazy Stav\n"
-+ 
-+-#: ../lib/inet6_gr.c:165
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+@@ -2107,30 +2422,37 @@ msgstr ""
-+ "Pøíznaky Odkazy Stav          Pro¹lý(sec) Smazat(sec)\n"
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr "Pou¾ití: inet6_route [-vF] del Cíl\n"
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr "       inet6_route [-vF] add Cíl [gw Gw] [metrika M] [[dev] If]\n"
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet6_route [-FC] flush      NENÍ podporováno\n"
-+ 
-+-#: ../lib/inet6_sr.c:182
-++#: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+ msgstr "Smìrovací tabulku `inet6' nelze vyprazdòovat\n"
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr "INET (IPv4) není na tomto systému nakonfigurováno.\n"
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro IP\n"
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2139,6 +2461,7 @@ msgstr ""
-+ "Rozhraní\n"
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2147,6 +2470,7 @@ msgstr ""
-+ "Rozhraní\n"
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+@@ -2155,10 +2479,12 @@ msgstr ""
-+ "Rozhraní MSS   Okno   irtt\n"
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+ msgstr "Smìrovací cache v jádru pro IP\n"
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2167,6 +2493,7 @@ msgstr ""
-+ "Rozhraní\n"
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2175,6 +2502,7 @@ msgstr ""
-+ "Rozhraní\n"
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+@@ -2183,6 +2511,7 @@ msgstr ""
-+ "Rozhraní MSS   Okno   irtt HH   Arp\n"
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+@@ -2190,7 +2519,8 @@ msgstr ""
-+ "Odesílatel      Adresát         Maska           Pøízn Metrik Odkazy U¾t "
-+ "Rozhraní MSS    Okno irtt   TOS HHOdk HHAktuál    Zvlá¹tCíl\n"
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+@@ -2198,29 +2528,34 @@ msgstr ""
-+ "Pou¾ití: inet_route [-vF] del {-host|-net} Cíl[/prefix] [gw Gw] [metrika M] "
-+ "[[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Cíl[/prefix] [gw Gw] [metrika M]\n"
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Cíl/[prefix] [metrika M] reject\n"
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet_route [-FC] flush      NENÍ podporováno\n"
-+ 
-+@@ -2230,15 +2565,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr "route: %s: sí» nelze pou¾ít jako bránu!\n"
-+ 
-+ #: ../lib/inet_sr.c:174
-+-#, fuzzy
-++#, fuzzy, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr "route: Nesprávné NSS.\n"
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr "route: Nesprávné okno.\n"
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr "route: Nesprávné zahajovací rtt.\n"
-+ 
-+@@ -2253,75 +2590,92 @@ msgid "route: bogus netmask %s\n"
-+ msgstr "route: sí»ová maska %s je nesprávná\n"
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr "route: sí»ová maska nevyhovuje adrese cesty\n"
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+ msgstr "Smìrovací cache `inet' nelze vyprazdòovat\n"
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+ msgstr "Smìrovací cache `inet' nelze mìnit\n"
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr "IPX není na tomto systému nakonfigurováno.\n"
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro IPX\n"
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+ msgstr "Cíl                       Smìrovaè Sí»              Smìrovaè Uzel\n"
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+ msgstr "IPX: toto je tøeba ulo¾it\n"
-+ 
-+-#: ../lib/masq_info.c:197
-++#: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr "IP maskovací polo¾ky\n"
-+ 
-+-#: ../lib/masq_info.c:200
-++#: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr "prot   ¾ivot  zdroj                cíl                  porty\n"
-+ 
-+-#: ../lib/masq_info.c:203
-++#: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+-"prot   ¾ivot     zahajsek delta pøedchd zdroj             cíl                "
-+-"   porty\n"
-++"prot   ¾ivot     zahajsek delta pøedchd zdroj             "
-++"cíl                   porty\n"
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr "NET/ROM není na tomto systému nakonfigurováno.\n"
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro NET/ROM\n"
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr "Cíl          Mnemonika Kvalita  Soused     Rozhraní\n"
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+ msgstr "pou¾ití netrom\n"
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+ msgstr "NET/ROM: toto je potøeba ulo¾it\n"
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr "Tímto programem nelze PPP spustit.\n"
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+ msgstr "Lituji, pou¾ijte pppd!\n"
-+ 
-+@@ -2330,49 +2684,319 @@ msgid "Node address must be ten digits"
-+ msgstr "Adresa uzlu musí mít 10 èíslic"
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr "ROSE není na tomto systému nakonfigurováno.\n"
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+ msgstr "Smìrovací tabulka v jádru pro ROSE\n"
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr "in_tr(%s): nesprávná token ring adresa!\n"
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr "in_tr(%s): nadbyteèné: ignorováno!\n"
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr "in_tr(%s): nadbyteèné znaky!\n"
-+ 
-+-#: ../lib/interface.c:124
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+ msgstr "varování: není dostupný ¾ádný inet soket: %s\n"
-+ 
-+-#: ../lib/interface.c:270
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr ""
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:504
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr "Zaøízení nebylo nalezeno"
-+ 
-+-#: ../lib/interface.c:508
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-+ msgstr "%s: chyba pøi získávání informací o rozhraní %s\n"
-+ 
-+-#: ../lib/sockets.c:59
-++#: ../lib/interface.c:608
-++msgid "     - no statistics available -"
-++msgstr "     - statistická data nejsou dostupná -"
-++
-++#: ../lib/interface.c:612
-++#, c-format
-++msgid "[NO FLAGS]"
-++msgstr "[®ÁDNÉ PØÍZNAKY]"
-++
-++#: ../lib/interface.c:688
-++#, c-format
-++msgid "%-9.9s Link encap:%s  "
-++msgstr "%-9.9s Zapouzdøení:%s  "
-++
-++#: ../lib/interface.c:693
-++#, c-format
-++msgid "HWaddr %s  "
-++msgstr "HWadr %s  "
-++
-++#: ../lib/interface.c:696
-++#, c-format
-++msgid "Media:%s"
-++msgstr "Médium:%s"
-++
-++#: ../lib/interface.c:698
-++#, c-format
-++msgid "(auto)"
-++msgstr "(auto)"
-++
-++#: ../lib/interface.c:705
-++#, c-format
-++msgid "          %s addr:%s "
-++msgstr "          %s adr:%s "
-++
-++#: ../lib/interface.c:708
-++#, c-format
-++msgid " P-t-P:%s "
-++msgstr " P-t-P:%s "
-++
-++# V ostatních katalozích se pøekládá Broadcast -> v¹esmìrové vysílání.
-++# Tudi¾ bcast -> V¹esmìr :)
-++#: ../lib/interface.c:711
-++#, c-format
-++msgid " Bcast:%s "
-++msgstr " V¹esmìr:%s "
-++
-++#: ../lib/interface.c:713
-++#, c-format
-++msgid " Mask:%s\n"
-++msgstr "Maska:%s\n"
-++
-++#: ../lib/interface.c:730
-++#, c-format
-++msgid "          inet6 addr: %s/%d"
-++msgstr "          inet6-adr: %s/%d"
-++
-++#: ../lib/interface.c:732
-++#, c-format
-++msgid " Scope:"
-++msgstr " Rozsah:"
-++
-++#: ../lib/interface.c:735
-++#, c-format
-++msgid "Global"
-++msgstr "Globál"
-++
-++#: ../lib/interface.c:738
-++#, c-format
-++msgid "Link"
-++msgstr "Linka"
-++
-++#: ../lib/interface.c:741
-++#, c-format
-++msgid "Site"
-++msgstr "Stanovi¹tì"
-++
-++#: ../lib/interface.c:744
-++#, c-format
-++msgid "Compat"
-++msgstr "Kompatibilita"
-++
-++#: ../lib/interface.c:747
-++#, c-format
-++msgid "Host"
-++msgstr "Poèítaè"
-++
-++#: ../lib/interface.c:750
-++#, c-format
-++msgid "Unknown"
-++msgstr "Neznám."
-++
-++#: ../lib/interface.c:765
-++#, c-format
-++msgid "          IPX/Ethernet II addr:%s\n"
-++msgstr "          IPX/Ethernet II adr: %s\n"
-++
-++#: ../lib/interface.c:768
-++#, c-format
-++msgid "          IPX/Ethernet SNAP addr:%s\n"
-++msgstr "          IPX/Ethernet SNAP adr:%s\n"
-++
-++#: ../lib/interface.c:771
-++#, c-format
-++msgid "          IPX/Ethernet 802.2 addr:%s\n"
-++msgstr "          IPX/Ethernet 802.2 adr:%s\n"
-++
-++#: ../lib/interface.c:774
-++#, c-format
-++msgid "          IPX/Ethernet 802.3 addr:%s\n"
-++msgstr "          IPX/Ethernet 802.3 adr:%s\n"
-++
-++#: ../lib/interface.c:784
-++#, c-format
-++msgid "          EtherTalk Phase 2 addr:%s\n"
-++msgstr "          EtherTalk Phase 2 adr:%s\n"
-++
-++#: ../lib/interface.c:793
-++#, c-format
-++msgid "          econet addr:%s\n"
-++msgstr "          econet adr:%s\n"
-++
-++# Hic sunt leones ...
-++#: ../lib/interface.c:800
-++#, c-format
-++msgid "[NO FLAGS] "
-++msgstr "[®ÁDNÉ PØÍZNAKY]"
-++
-++#: ../lib/interface.c:802
-++#, c-format
-++msgid "UP "
-++msgstr "AKTIVOVÁNO "
-++
-++#: ../lib/interface.c:804
-++#, c-format
-++msgid "BROADCAST "
-++msgstr "V©ESMÌROVÉ_VYSÍLÁNÍ "
-++
-++#: ../lib/interface.c:806
-++#, c-format
-++msgid "DEBUG "
-++msgstr "DEBUG "
-++
-++#: ../lib/interface.c:808
-++#, c-format
-++msgid "LOOPBACK "
-++msgstr "SMYÈKA "
-++
-++#: ../lib/interface.c:810
-++#, c-format
-++msgid "POINTOPOINT "
-++msgstr "POINTOPOINT "
-++
-++# ??
-++#: ../lib/interface.c:812
-++#, c-format
-++msgid "NOTRAILERS "
-++msgstr "NOTRAILERS "
-++
-++#: ../lib/interface.c:814
-++#, c-format
-++msgid "RUNNING "
-++msgstr "BÌ®Í "
-++
-++#: ../lib/interface.c:816
-++#, c-format
-++msgid "NOARP "
-++msgstr "NEARP "
-++
-++#: ../lib/interface.c:818
-++#, c-format
-++msgid "PROMISC "
-++msgstr "PROMISK "
-++
-++#: ../lib/interface.c:820
-++#, c-format
-++msgid "ALLMULTI "
-++msgstr "ALLMULTI "
-++
-++#: ../lib/interface.c:822
-++#, c-format
-++msgid "SLAVE "
-++msgstr "SLAVE "
-++
-++#: ../lib/interface.c:824
-++#, c-format
-++msgid "MASTER "
-++msgstr "MASTER "
-++
-++#: ../lib/interface.c:826
-++#, c-format
-++msgid "MULTICAST "
-++msgstr "MULTICAST "
-++
-++#: ../lib/interface.c:829
-++#, c-format
-++msgid "DYNAMIC "
-++msgstr "DYNAMIC "
-++
-++#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-++#: ../lib/interface.c:832
-++#, c-format
-++msgid " MTU:%d  Metric:%d"
-++msgstr " MTU:%d  Metrika:%d"
-++
-++#: ../lib/interface.c:836
-++#, c-format
-++msgid "  Outfill:%d  Keepalive:%d"
-++msgstr "  Outfill:%d  Keepalive:%d"
-++
-++#: ../lib/interface.c:850
-++#, fuzzy, c-format
-++msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgstr "pøijmutých paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu rámcù:%lu\n"
-++
-++#: ../lib/interface.c:855
-++#, c-format
-++msgid "             compressed:%lu\n"
-++msgstr "             komprimováno:%lu\n"
-++
-++# carrier?
-++#: ../lib/interface.c:895
-++#, fuzzy, c-format
-++msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgstr "odeslaných paketù:%lu chyb:%lu zahozeno:%lu pøeteèení:%lu pøenos:%lu\n"
-++
-++#: ../lib/interface.c:899
-++#, c-format
-++msgid "          collisions:%lu "
-++msgstr "          kolizí:%lu "
-++
-++#: ../lib/interface.c:901
-++#, c-format
-++msgid "compressed:%lu "
-++msgstr "komprimováno:%lu "
-++
-++#: ../lib/interface.c:903
-++#, c-format
-++msgid "txqueuelen:%d "
-++msgstr "délka odchozí fronty:%d "
-++
-++#: ../lib/interface.c:905
-++#, c-format
-++msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-++msgstr ""
-++
-++#: ../lib/interface.c:916
-++#, c-format
-++msgid "Interrupt:%d "
-++msgstr "Pøeru¹ení:%d "
-++
-++#. Only print devices using it for
-++#. I/O maps
-++#: ../lib/interface.c:919
-++#, c-format
-++msgid "Base address:0x%x "
-++msgstr "Vstupnì/Výstupní port:0x%x "
-++
-++#: ../lib/interface.c:921
-++#, c-format
-++msgid "Memory:%lx-%lx "
-++msgstr "Pamì»:%lx-%lx "
-++
-++#: ../lib/interface.c:924
-++#, c-format
-++msgid "DMA chan:%x "
-++msgstr "Kanál DMA:%x "
-++
-++#: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr "Nebyla nalezena ¾ádná pou¾itelná tøída adres.\n"
-+ 
-+@@ -2396,29 +3020,32 @@ msgstr "ip: %s není platnou IPv4 adresou
-+ msgid "ip: argument is wrong: %s\n"
-+ msgstr "ip: argument %s je nesprávný\n"
-+ 
-+-#: ../ipmaddr.c:56
-++#: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr " Usage: ipmaddr [ add | del ] MULTIADR dev ØETÌZEC\n"
-+ 
-+-#: ../ipmaddr.c:57
-++#: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr "       ipmaddr show [ dev ØETÌZEC ] [ ipv4 | ipv6 | link | all ]\n"
-+ 
-+-#: ../ipmaddr.c:58
-++#: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr "       ipmaddr -V | -version\n"
-+ 
-+-#: ../ipmaddr.c:258
-++#: ../ipmaddr.c:263
-+ #, c-format
-+ msgid "family %d "
-+ msgstr "tøída %d "
-+ 
-+-#: ../ipmaddr.c:267
-++#: ../ipmaddr.c:272
-+ #, c-format
-+ msgid " users %d"
-+ msgstr " u¾ivatelé %d"
-+ 
-+-#: ../ipmaddr.c:353
-++#: ../ipmaddr.c:358
-+ msgid "Cannot create socket"
-+ msgstr "Soket nelze vytvoøit"
-+ 
-+@@ -2433,6 +3060,7 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr "slattach: tty_lock: (%s): %s\n"
-+ 
-+ #: ../slattach.c:192
-++#, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr "slattach: do PID souboru nelze zapisovat\n"
-+ 
-+@@ -2451,44 +3079,77 @@ msgstr "slattach: tty_hangup(DROP): %s\n
-+ msgid "slattach: tty_hangup(RAISE): %s\n"
-+ msgstr "slattach: tty_hangup(RAISE): %s\n"
-+ 
-+-#: ../slattach.c:486
-++#: ../slattach.c:468
-++#, fuzzy, c-format
-++msgid "slattach: tty name too long\n"
-++msgstr "jméno %s je pøíli¹ dlouhé\n"
-++
-++#: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr "slattach: tty_open: aktuální stav nelze zjistit!\n"
-+ 
-+-#: ../slattach.c:493
-++#: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+ msgstr "slattach: tty_open: aktuální linkovou disciplínu nelze zjistit!\n"
-+ 
-+-#: ../slattach.c:501
-++#: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr "slattach: tty_open: re¾im RAW nelze nastavit!\n"
-+ 
-+-#: ../slattach.c:508
-++#: ../slattach.c:520
-+ #, c-format
-+ msgid "slattach: tty_open: cannot set %s bps!\n"
-+ msgstr "slattach: tty_open: %s bps nelze nastavit!\n"
-+ 
-+-#: ../slattach.c:518
-++#: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr "slattach: tty_open: re¾im 8N1 nelze nastavit!\n"
-+ 
-+-#: ../slattach.c:686
-++#: ../slattach.c:672
-++#, c-format
-++msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++msgstr ""
-++
-++#: ../slattach.c:704
-+ #, c-format
-+ msgid "%s started"
-+ msgstr "protokol %s spu¹tìn"
-+ 
-+-#: ../slattach.c:687
-++#: ../slattach.c:705
-+ #, c-format
-+ msgid " on %s"
-+ msgstr " na %s"
-+ 
-+-#: ../slattach.c:688
-++#: ../slattach.c:706
-+ #, c-format
-+ msgid " interface %s\n"
-+ msgstr " rozhraní %s\n"
-+ 
-+ #~ msgid ""
-+-#~ "   This comand can read or set the hostname or the NIS domainname. You can\n"
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-++#~ "<-''-\n"
-++#~ msgstr ""
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s <soubor> <hwadr> [sí»mask <èís>]  <-''-\n"
-++
-++#~ msgid "%s: unknown interface: %s\n"
-++#~ msgstr "%s: rozhraní %s není známo\n"
-++
-++#~ msgid "address mask replies"
-++#~ msgstr "odpovìdi na ¾ádost o masku podsítì"
-++
-++#~ msgid "unknown title %s\n"
-++#~ msgstr "titulek %s je neznámý\n"
-++
-++#~ msgid "Routing table for `ddp' not yet supported.\n"
-++#~ msgstr "Smìrovací tabulka pro `ddp' není zatím podporována.\n"
-++
-++#~ msgid ""
-++#~ "   This comand can read or set the hostname or the NIS domainname. You "
-++#~ "can\n"
-+ #~ msgstr ""
-+ #~ "   Tento program zji¹»uje a nastavuje jméno poèítaèe èi NIS domény. Mù¾e "
-+ #~ "také\n"
-+@@ -2500,7 +3161,8 @@ msgstr " rozhraní %s\n"
-+ #~ msgid ""
-+ #~ "   Unless you are using bind or NIS for host lookups you can change the\n"
-+ #~ msgstr ""
-+-#~ "   Pokud nepou¾íváte bind èi NIS pro vyhledávání jmen poèítaèù, pak mù¾ete\n"
-++#~ "   Pokud nepou¾íváte bind èi NIS pro vyhledávání jmen poèítaèù, pak "
-++#~ "mù¾ete\n"
-+ 
-+ #~ msgid ""
-+ #~ "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
-+Index: net-tools/po/Makefile
-+===================================================================
-+--- net-tools.orig/po/Makefile
-++++ net-tools/po/Makefile
-+@@ -3,13 +3,13 @@ INSTALL_PROGRAM= ${INSTALL}
-+ INSTALL_DATA= ${INSTALL} -m 644
-+ INSTALLNLSDIR=${BASEDIR}/usr/share/locale
-+ 
-+-TUPDATE = tupdate
-++TUPDATE = msgmerge
-+ 
-+ NLSPACKAGE = net-tools
-+ 
-+ -include ../config.make
-+ ifeq ($(I18N),1)
-+-CATALOGS = de.mo fr.mo pt_BR.mo et_EE.mo cs.mo
-++CATALOGS = de.mo fr.mo pt_BR.mo et_EE.mo cs.mo ja.mo
-+ else
-+ CATALOGS =
-+ endif
-+@@ -49,7 +49,7 @@ update-po: Makefile
-+ 		lang=`echo $$cat | sed 's/.mo//'`; \
-+ 		mv $$lang.po $$lang.old.po; \
-+ 		echo "$$lang:"; \
-+-		if $(TUPDATE) $(NLSPACKAGE).pot $$lang.old.po > $$lang.po; then \
-++		if $(TUPDATE) $$lang.old.po $(NLSPACKAGE).pot > $$lang.po; then \
-+ 		rm -f $$lang.old.po; \
-+ 	else \
-+ 	 	echo "tupdate for $$cat failed!"; \
-+Index: net-tools/po/de.po
-+===================================================================
-+--- net-tools.orig/po/de.po
-++++ net-tools/po/de.po
-+@@ -1,106 +1,121 @@
-+-# $Id: de.po,v 1.10 2000/08/01 03:19:48 ecki Exp $
-++# $Id: de.po,v 1.11 2003/10/25 21:15:09 ecki Exp $
-+ # German translation for net-tools 1.51
-+ # Copyright (C) 1999 Ralf Bächle <ralf@gnu.org>
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: net-tools 1.51\n"
-+-"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-+-"PO-Revision-Date: 1998-03-01 00:02+0100\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-++"PO-Revision-Date: 2005-06-13 00:02+0100\n"
-+ "Last-Translator: Ralf Bächle <ralf@gnu.org>\n"
-+ "Language-Team:\n"
-+ "MIME-Version: 1.0\n"
-+-"Content-Type: text/plain; charset=iso8859-1\n"
-++"Content-Type: text/plain; charset=iso-8859-1\n"
-+ "Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:110 ../arp.c:269
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+-msgstr "arp: Hostname muß angegeben werden\n"
-++msgstr "arp: Hostname muss angegeben werden\n"
-+ 
-+-#: ../arp.c:207 ../arp.c:221
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+-msgstr "Kein ARP Eintrag für %s\n"
-++msgstr "Kein ARP-Eintrag für %s\n"
-+ 
-+-#: ../arp.c:239
-++#: ../arp.c:248
-+ #, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr "rarp: Kann Eintrag aus %s : %u nicht setzen.\n"
-+ 
-+-#: ../arp.c:243
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr "arp: unpassende Protokolltypen.\n"
-+ 
-+-#: ../arp.c:252
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+-msgstr "arp: Gerät ,,%s'' hat HW-Adresse %s ,,%s''.\n"
-++msgstr "arp: Gerät »%s« hat HW-Adresse %s »%s«.\n"
-+ 
-+-#: ../arp.c:282
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+-msgstr "arp: Hardwareadresse muß angegeben werden\n"
-++msgstr "arp: Hardwareadresse muss angegeben werden\n"
-+ 
-+-#: ../arp.c:290
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr "arp: ungültige Hardwareadresse\n"
-+ 
-+-#: ../arp.c:387
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr "arp: Kann %s nicht öffnen!\n"
-+ 
-+-#: ../arp.c:403
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr "arp: Formatfehler in Zeile %u von Etherfile %s.\n"
-+ 
-+-#: ../arp.c:416
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr "arp: Kann Eintrag auf Zeile %u von Etherdatei %s nicht setzen!\n"
-+ 
-+-#: ../arp.c:437
-+-msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-++#: ../arp.c:448
-++#, fuzzy, c-format
-++msgid ""
-++"Address                  HWtype  HWaddress           Flags Mask            "
-++"Iface\n"
-+ msgstr "Adresse\t\t\tHWTyp\tHWAdresse\t    Flags   Maske\t\t  Iface\n"
-+ 
-+-#: ../arp.c:467
-++#: ../arp.c:476
-++#, fuzzy
-++msgid "<from_interface>"
-++msgstr " Schnittstelle: %s\n"
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+-msgstr "(unvollsändig)"
-++msgstr "(unvollständig)"
-+ 
-+-#: ../arp.c:484
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr "%s (%s) auf "
-+ 
-+-#: ../arp.c:490
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr "<unvollständig> "
-+ 
-+-#: ../arp.c:496
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr "netzmaske %s "
-+ 
-+-#: ../arp.c:513
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr "auf %s\n"
-+ 
-+-#: ../arp.c:592
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr "Einträge: %d   Ignoriert: %d   Gefunden: %d\n"
-+ 
-+-#: ../arp.c:596
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr "%s (%s) -- kein Eintrag\n"
-+ 
-+-#: ../arp.c:598
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+-msgstr "arp: In %d Einträgen wurde kein Zutreffender gefunden.\n"
-++msgstr "arp: In %d Einträgen wurde kein zutreffender gefunden.\n"
-+ 
-+-#: ../arp.c:613
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+@@ -109,157 +124,165 @@ msgstr ""
-+ "Benutzung:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<Hostname>]\n"
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:627
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+ msgstr "  arp [-v]          [-i <if>] -d  <Hostname> [pub][nopub]\n"
-+ 
-+-#: ../arp.c:615
-++#: ../arp.c:628
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+ msgstr "  arp [-vnD] [<HW>] [-i <if>] -f  <Dateiname>           <- Eintrag aus Datei hinzufügen\n"
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:629
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+ msgstr ""
-+ "  arp [-v]   [<HW>] [-i <if>] -s  <Rechnername> <hwaddr> [temp][nopub]\n"
-+ 
-+-#: ../arp.c:617
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <Hostname> <hwaddr> [netmask <nm>] pub\n"
-+-
-+-#: ../arp.c:618
-++#: ../arp.c:630
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+ msgstr "  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub\n"
-+ 
-+-#: ../arp.c:620
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+ msgstr "        -a                       Alle Hosts im BSD-Format anzeigen\n"
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr "        -s, --set                Neuen ARP-Eintrag setzen\n"
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr "        -d, --delete             Einen bestimmten Eintrag löschen\n"
-+ 
-+-#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr "        -v, --verbose            Ausführliche Ausgaben\n"
-+ 
-+-#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
-+-msgid "        -n, --numeric            dont resolve names\n"
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, fuzzy, c-format
-++msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-+ 
-+-#: ../arp.c:625
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+-msgstr "        -i, --device             Netzwerksgerät (z.B. eth0) angeben\n"
-++msgstr "        -i, --device             Netzwerkgerät (z.B. eth0) angeben\n"
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+ msgstr "        -D, --use-device         <hwaddr> von gegebenem Gerät lesen\n"
-+ 
-+-#: ../arp.c:627
-++#: ../arp.c:639
-++#, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr "        -A, -p, --protocol              Routentabelle anzeigen\n"
-+ 
-+-#: ../arp.c:628
-++#: ../arp.c:640
-++#, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+ "        -f, --file               Neue Einträge aus Datei lesen\n"
-+ "\n"
-+ 
-+-#: ../arp.c:630 ../rarp.c:181
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+ msgstr "  <HW>='-H <hw>' um Hardwareadresstyp anzugeben.  Standard: %s\n"
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr "  Liste möglicher Hardwaretypen, die ARP unterstützen:\n"
-+ 
-+-#: ../arp.c:664
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr "%s: Hardwaretyp nicht unterstützt!\n"
-+ 
-+-#: ../arp.c:668
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr "%s: Adressfamilie nicht unterstützt!\n"
-+ 
-+-#: ../arp.c:703
-++#: ../arp.c:716
-++#, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr "arp: -N noch nicht unterstützt.\n"
-+ 
-+-#: ../arp.c:713
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr "arp: %s: unbekannte Adressfamilie.\n"
-+ 
-+-#: ../arp.c:722
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr "arp: %s: unbekannter Hardwaretyp.\n"
-+ 
-+-#: ../arp.c:741
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+-msgstr "arp: %s: Kernel unterstützt nur ,,inet''.\n"
-++msgstr "arp: %s: Kernel unterstützt nur »inet«.\n"
-+ 
-+-#: ../arp.c:746
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr "arp: %s: Hardware unterstützt kein ARP.\n"
-+ 
-+-#: ../hostname.c:69
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+-msgstr "Rechnernamen auf ,,%s'' setzen\n"
-++msgstr "Rechnernamen auf »%s« setzen\n"
-+ 
-+-#: ../hostname.c:74
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr "%s: Nur Root darf den Rechnernamen ändern\n"
-+ 
-+-#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr "%s: name zu lang\n"
-+ 
-+-#: ../hostname.c:89
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+-msgstr "Setze Hostname auf ,,%s''\n"
-++msgstr "Setze Hostname auf »%s«\n"
-+ 
-+-#: ../hostname.c:94
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+-msgstr "%s: Nur Root darf then Rechnernamen ändern\n"
-++msgstr "%s: Nur Root darf den Rechnernamen ändern\n"
-+ 
-+-#: ../hostname.c:108
-++#: ../hostname.c:109
-+ #, c-format
-+ msgid "Setting domainname to `%s'\n"
-+-msgstr "Setze domainname auf ,,%s''\n"
-++msgstr "Setze domainname auf »%s«\n"
-+ 
-+-#: ../hostname.c:113
-++#: ../hostname.c:114
-+ #, c-format
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr "%s: Nur Root darf den Domainnamen ändern\n"
-+@@ -267,51 +290,56 @@ msgstr "%s: Nur Root darf den Domainname
-+ #: ../hostname.c:131
-+ #, c-format
-+ msgid "Resolving `%s' ...\n"
-+-msgstr "Löse ,,%s'' auf ...\n"
-++msgstr "Löse »%s« auf ...\n"
-+ 
-+ #: ../hostname.c:137
-+ #, c-format
-+ msgid "Result: h_name=`%s'\n"
-+-msgstr "Ergebnis: h_name=,,%s''\n"
-++msgstr "Ergebnis: h_name=»%s«\n"
-+ 
-+ #: ../hostname.c:142
-+ #, c-format
-+ msgid "Result: h_aliases=`%s'\n"
-+-msgstr "Ergebnis: h_aliases=,,%s''\n"
-++msgstr "Ergebnis: h_aliases=»%s«\n"
-+ 
-+ #: ../hostname.c:147
-+ #, c-format
-+ msgid "Result: h_addr_list=`%s'\n"
-+-msgstr "Ergebnis: h_addr_list=,,%s''\n"
-++msgstr "Ergebnis: h_addr_list=»%s«\n"
-+ 
-+-#: ../hostname.c:209
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+-msgstr "%s: Kann ,,%s'' nicht öffnen\n"
-++msgstr "%s: Kann »%s« nicht öffnen\n"
-+ 
-+-#: ../hostname.c:223
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+ msgstr ""
-+ "Benutzung: hostname [-v] {Hostname|-F Datei} Hostname (aus Datei) setzen\n"
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+ msgstr ""
-+-"       domainname [-v] {nisdomain|-F file}   NIS Domainname (aus Datei) "
-++"       domainname [-v] {nisdomain|-F file}   NIS-Domainname (aus Datei) "
-+ "setzen.\n"
-+ 
-+-#: ../hostname.c:226
-++#: ../hostname.c:225
-++#, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+ msgstr "       nodename [-v] {Rechnername|-F Datei}\n"
-+ 
-+-#: ../hostname.c:228
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]\n"
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+@@ -319,7 +347,8 @@ msgstr ""
-+ "       hostname [-v]                         Hostnamen anzeigen\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+@@ -328,7 +357,8 @@ msgstr ""
-+ "beenden.\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+@@ -336,43 +366,52 @@ msgstr ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr "    -s, --short           Kurzer Hostname\n"
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr "    -a, --alias           Namensalias\n"
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr "    -i, --ip-address      Adressen für den Hostnamen\n"
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr "    -f, --fqdn, --long    Langer Hostname (FQDN)\n"
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+-msgstr "    -d, --domain          DNS Domainname\n"
-++msgstr "    -d, --domain          DNS-Domainname\n"
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+-msgstr "    -y, --yp, --nis       NIS/YP Domainname\n"
-++msgstr "    -y, --yp, --nis       NIS/YP-Domainname\n"
-+ 
-+-#: ../hostname.c:239
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+-msgstr "    -n, --node            DECnet Knotennamen\n"
-++msgstr "    -n, --node            DECnet-Knotennamen\n"
-+ 
-+-#: ../hostname.c:241
-++#: ../hostname.c:240
-++#, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+ msgstr ""
-+-"    -F, --file            Hostnamen oder NIS Domainnamen aus Datei lesen\n"
-++"    -F, --file            Hostnamen oder NIS-Domainnamen aus Datei lesen\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:243
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -380,395 +419,268 @@ msgid ""
-+ "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
-+ "   part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr ""
-+-"   Dies Kommando setzt oder gibt den Hostnamen oder NIS Domainnamen aus.\n"
-+-"   Es ist ebenfalls möglich die DNS Domain oder den FQDN (langen Hostnamen)\n"
-++"   Dies Kommando setzt oder gibt den Hostnamen oder NIS-Domainnamen aus.\n"
-++"   Es ist ebenfalls möglich die DNS-Domain oder den FQDN (langen Hostnamen)\n"
-+ "   ausgeben zu lassen.  Außer wenn DNS oder NIS als Namensdienst verwendet\n"
-+-"   wird, können FQDN (Fully Qualified Domain Name) und DNS Domainname (welcher\n"
-++"   wird, können FQDN (Fully Qualified Domain Name) und DNS-Domainname (welcher\n"
-+ "   Teil des FQDNs ist) in /etc/hosts geändert werden.\n"
-+ 
-+ #: ../hostname.c:338
-+ #, c-format
-+ msgid "%s: You can't change the DNS domain name with this command\n"
-+-msgstr "%s: Mit diesem Program kann der DNS Domainname nicht geändert werden\n"
-++msgstr "%s: Mit diesem Programm kann der DNS-Domainname nicht geändert werden\n"
-+ 
-+ #: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+ msgstr ""
-+ "\n"
-+-"Wenn Bind oder NIS nicht zur Hostnamensauflösung benutzt werden, kann der "
-+-"DNS\n"
-++"Wenn Bind oder NIS nicht zur Hostnamensauflösung benutzt werden, kann der DNS\n"
-+ 
-+ #: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+-msgstr ""
-+-"Domainname (welcher Teil des FQDN ist) in der Datei /etc/hosts geändert "
-+-"werden.\n"
-++msgstr "Domainname (welcher Teil des FQDN ist) in der Datei /etc/hosts geändert werden.\n"
-+ 
-+ #: ../hostname.c:357
-+ #, c-format
-+ msgid "gethostname()=`%s'\n"
-+-msgstr "gethostname()=,,%s''\n"
-++msgstr "gethostname()=»%s«\n"
-+ 
-+ #: ../hostname.c:374
-+ #, c-format
-+ msgid "getdomainname()=`%s'\n"
-+-msgstr "getdomainname()=,,%s''\n"
-++msgstr "getdomainname()=»%s«\n"
-+ 
-+ #: ../hostname.c:389
-+ #, c-format
-+ msgid "getnodename()=`%s'\n"
-+-msgstr "getnodename()=,,%s''\n"
-++msgstr "getnodename()=»%s«\n"
-+ 
-+-#: ../ifconfig.c:159
-+-#, c-format
-+-msgid "%-9.9s Link encap:%s  "
-+-msgstr "%-9.9s Protokoll:%s  "
-++#: ../ifconfig.c:107
-++#, fuzzy, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr "SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb Flg\n"
-+ 
-+-#: ../ifconfig.c:164
-+-#, c-format
-+-msgid "HWaddr %s  "
-+-msgstr "Hardware Adresse %s  "
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, fuzzy, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
-+ 
-+-#: ../ifconfig.c:167
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-+ #, c-format
-+-msgid "Media:%s"
-+-msgstr "Medium:%s"
-++msgid "No support for INET on this system.\n"
-++msgstr "INET ist auf diesem System nicht verfügbar.\n"
-+ 
-+-#: ../ifconfig.c:169
-+-msgid "(auto)"
-+-msgstr "(auto)"
-++#: ../ifconfig.c:193
-++#, fuzzy, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
-+ 
-+-#: ../ifconfig.c:176
-+-#, c-format
-+-msgid "          %s addr:%s "
-+-msgstr "          %s Adresse:%s "
-++#: ../ifconfig.c:202
-++#, fuzzy, c-format
-++msgid ""
-++"Usage:\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++msgstr ""
-++"Syntax:\n"
-++"  ifconfig [-a] [-i] [-v] <Schnittstelle> [[<AF>] <Adresse>]\n"
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:204
-+ #, c-format
-+-msgid " P-t-P:%s "
-+-msgstr " P-z-P:%s "
-++msgid "  [add <address>[/<prefixlen>]]\n"
-++msgstr "  [add <Adresse>[/<Präfixlänge>]]\n"
-+ 
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:205
-+ #, c-format
-+-msgid " Bcast:%s "
-+-msgstr " Bcast:%s "
-++msgid "  [del <address>[/<prefixlen>]]\n"
-++msgstr "  [del <Adresse>[/<Präfixlänge>]]\n"
-+ 
-+-#: ../ifconfig.c:184
-++#: ../ifconfig.c:206
-+ #, c-format
-+-msgid " Mask:%s\n"
-+-msgstr " Maske:%s\n"
-++msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-++msgstr "  [[-]broadcast [<Adresse>]]  [[-]pointopoint [<Adresse>]]\n"
-+ 
-+-#: ../ifconfig.c:201
-++#: ../ifconfig.c:207
-+ #, c-format
-+-msgid "          inet6 addr: %s/%d"
-+-msgstr "          inet6 Adresse: %s/%d"
-+-
-+-#: ../ifconfig.c:203
-+-msgid " Scope:"
-+-msgstr " Gültigkeitsbereich:"
-+-
-+-#: ../ifconfig.c:206
-+-msgid "Global"
-+-msgstr "Global"
-++msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-++msgstr "  [netmask <Adresse>]  [dstaddr <Adresse>]  [tunnel <Adresse>]\n"
-+ 
-+-#: ../ifconfig.c:209
-+-msgid "Link"
-+-msgstr "Verbindung"
-++#: ../ifconfig.c:210
-++#, c-format
-++msgid "  [outfill <NN>] [keepalive <NN>]\n"
-++msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+ 
-+ #: ../ifconfig.c:212
-+-msgid "Site"
-+-msgstr "Standort"
-+-
-+-#: ../ifconfig.c:215
-+-msgid "Compat"
-+-msgstr "Kompatibilität"
-+-
-+-#: ../ifconfig.c:218
-+-msgid "Host"
-+-msgstr "Maschine"
-+-
-+-#: ../ifconfig.c:221
-+-msgid "Unknown"
-+-msgstr "Unbekannt"
-+-
-+-#: ../ifconfig.c:236
-+ #, c-format
-+-msgid "          IPX/Ethernet II addr:%s\n"
-+-msgstr "          IPX/Ethernet II Adresse:%s\n"
-++msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-++msgstr "  [hw <HW> <Adresse>]  [metric <NN>]  [mtu <NN>]\n"
-+ 
-+-#: ../ifconfig.c:239
-++#: ../ifconfig.c:213
-+ #, c-format
-+-msgid "          IPX/Ethernet SNAP addr:%s\n"
-+-msgstr "          IPX/Ethernet SNAP Adresse:%s\n"
-++msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ 
-+-#: ../ifconfig.c:242
-++#: ../ifconfig.c:214
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+-msgstr "          IPX/Ethernet 802.2 Adresse:%s\n"
-++msgid "  [multicast]  [[-]promisc]\n"
-++msgstr "  [multicast]  [[-]promisc]\n"
-+ 
-+-#: ../ifconfig.c:245
-++#: ../ifconfig.c:215
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+-msgstr "          IPX/Ethernet 802.3 Adresse:%s\n"
-++msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-++msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <Typ>]\n"
-+ 
-+-#: ../ifconfig.c:255
-++#: ../ifconfig.c:217
-+ #, c-format
-+-msgid "          EtherTalk Phase 2 addr:%s\n"
-+-msgstr "          EtherTalk Phase 2 Adresse:%s\n"
-++msgid "  [txqueuelen <NN>]\n"
-++msgstr "  [txqueuelen <Länge>]\n"
-+ 
-+-#: ../ifconfig.c:264
-++#: ../ifconfig.c:220
-+ #, c-format
-+-msgid "          econet addr:%s\n"
-+-msgstr "          econet Adresse:%s\n"
-+-
-+-#: ../ifconfig.c:270
-+-msgid "[NO FLAGS] "
-+-msgstr "[KEINE FLAGS] "
-+-
-+-#: ../ifconfig.c:272
-+-msgid "UP "
-+-msgstr "UP "
-+-
-+-#: ../ifconfig.c:274
-+-msgid "BROADCAST "
-+-msgstr "BROADCAST "
-+-
-+-#: ../ifconfig.c:276
-+-msgid "DEBUG "
-+-msgstr "DEBUG "
-+-
-+-#: ../ifconfig.c:278
-+-msgid "LOOPBACK "
-+-msgstr "LOOPBACK "
-+-
-+-#: ../ifconfig.c:280
-+-msgid "POINTOPOINT "
-+-msgstr "PUNKTZUPUNKT "
-+-
-+-#: ../ifconfig.c:282
-+-msgid "NOTRAILERS "
-+-msgstr "NOTRAILERS "
-++msgid "  [[-]dynamic]\n"
-++msgstr "  [[-]dynamic]\n"
-+ 
-+-#: ../ifconfig.c:284
-+-msgid "RUNNING "
-+-msgstr "RUNNING "
-++#: ../ifconfig.c:222
-++#, c-format
-++msgid ""
-++"  [up|down] ...\n"
-++"\n"
-++msgstr ""
-++"  [up|down] ...\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:286
-+-msgid "NOARP "
-+-msgstr "NOARP "
-++#: ../ifconfig.c:224
-++#, c-format
-++msgid "  <HW>=Hardware Type.\n"
-++msgstr "  <HW>=Hardwaretyp.\n"
-+ 
-+-#: ../ifconfig.c:288
-+-msgid "PROMISC "
-+-msgstr "PROMISC "
-++#: ../ifconfig.c:225
-++#, c-format
-++msgid "  List of possible hardware types:\n"
-++msgstr "  Liste möglicher Hardwaretypen:\n"
-+ 
-+-#: ../ifconfig.c:290
-+-msgid "ALLMULTI "
-+-msgstr "ALLMULTI "
-++#. 1 = ARPable
-++#: ../ifconfig.c:227
-++#, c-format
-++msgid "  <AF>=Address family. Default: %s\n"
-++msgstr "  <AF>=Adressfamilie.  Standardwert: %s\n"
-+ 
-+-#: ../ifconfig.c:292
-+-msgid "SLAVE "
-+-msgstr "SLAVE "
-++#: ../ifconfig.c:228
-++#, c-format
-++msgid "  List of possible address families:\n"
-++msgstr "  List der möglichen Adressfamilien:\n"
-+ 
-+-#: ../ifconfig.c:294
-+-msgid "MASTER "
-+-msgstr "MASTER "
-++#: ../ifconfig.c:303
-++#, c-format
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:296
-+-msgid "MULTICAST "
-+-msgstr "MULTICAST "
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:299
-+-msgid "DYNAMIC "
-+-msgstr "DYNAMIC "
-++#: ../ifconfig.c:380
-++#, c-format
-++msgid "Unknown media type.\n"
-++msgstr "Typ des Mediums unbekannt.\n"
-+ 
-+-#: ../ifconfig.c:302
-++#: ../ifconfig.c:417
-+ #, c-format
-+-msgid " MTU:%d  Metric:%d"
-+-msgstr " MTU:%d  Metric:%d"
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:306
-++#: ../ifconfig.c:429
-+ #, c-format
-+-msgid "  Outfill:%d  Keepalive:%d"
-+-msgstr "  Outfill:%d  Keepalive:%d"
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:320
-++#: ../ifconfig.c:441
-+ #, c-format
-+-msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-+ msgstr ""
-+-"Empfangene Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Rahmen:%lu\n"
-+ 
-+-#: ../ifconfig.c:325
-++#: ../ifconfig.c:465
-+ #, c-format
-+-msgid "             compressed:%lu\n"
-+-msgstr "             komprimiert:%lu\n"
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:329
-++#: ../ifconfig.c:523
-+ #, c-format
-+-msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-+ msgstr ""
-+-"Verschickte Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Träger:%lu\n"
-+ 
-+-#: ../ifconfig.c:333
-++#: ../ifconfig.c:652
-+ #, c-format
-+-msgid "          collisions:%lu "
-+-msgstr "          Kollisionen:%lu "
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:335
-++#: ../ifconfig.c:684
-+ #, c-format
-+-msgid "compressed:%lu "
-+-msgstr "Komprimiert:%lu "
-++msgid "hw address type `%s' has no handler to set address. failed.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:337
-++#: ../ifconfig.c:693
-+ #, c-format
-+-msgid "txqueuelen:%d "
-+-msgstr "Sendewarteschlangenlänge:%d "
-++msgid "%s: invalid %s address.\n"
-++msgstr "%s: ungültige %s Adresse.\n"
-+ 
-+-#: ../ifconfig.c:345
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+ #, c-format
-+-msgid "Interrupt:%d "
-+-msgstr "Interrupt:%d "
-+-
-+-#. Only print devices using it for
-+-#. I/O maps
-+-#: ../ifconfig.c:348
-+-#, c-format
-+-msgid "Base address:0x%x "
-+-msgstr "Basisadresse:0x%x "
-+-
-+-#: ../ifconfig.c:350
-+-#, c-format
-+-msgid "Memory:%lx-%lx "
-+-msgstr "Speicher:%lx-%lx "
-+-
-+-#: ../ifconfig.c:353
-+-#, c-format
-+-msgid "DMA chan:%x "
-+-msgstr "DMA Kanal:%x "
-++msgid "No support for INET6 on this system.\n"
-++msgstr "INET6 ist auf diesem System nicht verfügbar.\n"
-+ 
-+-#: ../ifconfig.c:384 ../ifconfig.c:405
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-+ #, c-format
-+-msgid "%s: unknown interface: %s\n"
-+-msgstr "%s: unbekannte Schnittstelle: %s\n"
-+-
-+-#: ../ifconfig.c:421
-+-msgid ""
-+-"Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
-+-msgstr ""
-+-"Syntax:\n"
-+-"  ifconfig [-a] [-i] [-v] <Schnittstelle> [[<AF>] <Adresse>]\n"
-+-
-+-#: ../ifconfig.c:425
-+-msgid "  [add <address>[/<prefixlen>]]\n"
-+-msgstr "  [add <Adresse>[/<Prefixlänge>]]\n"
-+-
-+-#: ../ifconfig.c:427
-+-msgid "  [del <address>[/<prefixlen>]]\n"
-+-msgstr "  [del <Adresse>[/<Prefixlänge>]]\n"
-+-
-+-#: ../ifconfig.c:432
-+-msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+-msgstr "  [[-]broadcast [<Adresse>]]  [[-]pointopoint [<Adresse>]]\n"
-+-
-+-#: ../ifconfig.c:433
-+-msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+-msgstr "  [netmask <Addresse>]  [dstaddr <Adresse>]  [tunnel <Adresse>]\n"
-+-
-+-#: ../ifconfig.c:436
-+-msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+-msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+-
-+-#: ../ifconfig.c:438
-+-msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+-msgstr "  [hw <HW> <Adresse>]  [metric <NN>]  [mtu <NN>]\n"
-+-
-+-#: ../ifconfig.c:439
-+-msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-
-+-#: ../ifconfig.c:440
-+-msgid "  [multicast]  [[-]promisc]\n"
-+-msgstr "  [multicast]  [[-]promisc]\n"
-+-
-+-#: ../ifconfig.c:441
-+-msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+-msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <Typ>]\n"
-+-
-+-#: ../ifconfig.c:443
-+-msgid "  [txqueuelen <NN>]\n"
-+-msgstr "  [txqueuelen <Länge>]\n"
-+-
-+-#: ../ifconfig.c:446
-+-msgid "  [[-]dynamic]\n"
-+-msgstr "  [[-]dynamic]\n"
-+-
-+-#: ../ifconfig.c:448
-+-msgid ""
-+-"  [up|down] ...\n"
-+-"\n"
-++msgid "Interface %s not initialized\n"
-+ msgstr ""
-+-"  [up|down] ...\n"
-+-"\n"
-+-
-+-#: ../ifconfig.c:450
-+-msgid "  <HW>=Hardware Type.\n"
-+-msgstr "  <HW>=Hardwaretyp.\n"
-+-
-+-#: ../ifconfig.c:451
-+-msgid "  List of possible hardware types:\n"
-+-msgstr "  Liste möglicher Hardwaretypen:\n"
-+-
-+-#. 1 = ARPable
-+-#: ../ifconfig.c:453
-+-#, c-format
-+-msgid "  <AF>=Address family. Default: %s\n"
-+-msgstr "  <AF>=Adressfamilie.  Standardwert: %s\n"
-+-
-+-#: ../ifconfig.c:454
-+-msgid "  List of possible address families:\n"
-+-msgstr "  List der möglichen Adressfamilien:\n"
-+-
-+-#: ../ifconfig.c:593
-+-msgid "Unknown media type.\n"
-+-msgstr "Typ des Mediums unbekannt.\n"
-+ 
-+-#: ../ifconfig.c:881
-+-#, c-format
-+-msgid "%s: invalid %s address.\n"
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, fuzzy, c-format
-++msgid "Bad address.\n"
-+ msgstr "%s: ungültige %s Adresse.\n"
-+ 
-+-#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
-+-msgid "No support for INET6 on this system.\n"
-+-msgstr "INET6 ist auf diesem System nicht verfügbar.\n"
-+-
-+-#: ../ifconfig.c:983
-++#: ../ifconfig.c:885
-++#, c-format
-+ msgid "Address deletion not supported on this system.\n"
-+-msgstr "Das Löschen von Adressen ist auf diesem System nicht unterstützt.\n"
-++msgstr "Das Löschen von Adressen wird auf diesem System nicht unterstützt.\n"
-+ 
-+-#: ../ifconfig.c:1066
-+-msgid "No support for INET on this system.\n"
-+-msgstr "INET ist auf diesem System nicht verfügbar.\n"
-++#: ../ifconfig.c:957
-++#, fuzzy, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "Kann die Adressen der Familie %d nicht setzen.\n"
-+ 
-+-#: ../ifconfig.c:1076
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr "ECONET wird auf diesem System nicht unterstützt.\n"
-+ 
-+-#: ../ifconfig.c:1084
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr "Kann die Adressen der Familie %d nicht setzen.\n"
-+ 
-+-#: ../netstat.c:383
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+-msgstr ""
-+-"(Für \"-p\": geteuid()=%d konnte keine Information gelesen werden; sie "
-+-"sollten Root sein.)\n"
-++msgstr "(Für \"-p\": geteuid()=%d konnte keine Information gelesen werden; sie sollten Root sein.)\n"
-+ 
-+-#: ../netstat.c:387
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+@@ -776,198 +688,220 @@ msgstr ""
-+ "(Es konnten nicht alle Prozesse identifiziert werden; Informationen über\n"
-+ "nicht-eigene Processe werden nicht angezeigt; Root kann sie anzeigen.)\n"
-+ 
-+-#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr "HÖRT"
-+ 
-+-#: ../netstat.c:395
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr "VERBINGSAUFBAU GESCHICKT"
-+ 
-+-#: ../netstat.c:396 ../netstat.c:1168
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr "VERBINDUNGSABBAU GESCHICKT"
-+ 
-+-#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr "VERBUNDEN"
-+ 
-+-#: ../netstat.c:419
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr "Aktive NET/ROM Sockets\n"
-+ 
-+-#: ../netstat.c:420
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-+-msgstr ""
-+-"Benutzer   Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-++msgstr "Benutzer   Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Recv-Q\n"
-+ 
-+-#: ../netstat.c:430 ../netstat.c:1208
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr "Probleme beim Lesen von %s\n"
-+ 
-+-#: ../netstat.c:465
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr "SYN_SENT"
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr "SYN_RECV"
-+ 
-+-#: ../netstat.c:467
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr "FIN_WAIT1"
-+ 
-+-#: ../netstat.c:468
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr "FIN_WAIT2"
-+ 
-+-#: ../netstat.c:469
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr "TIME_WAIT"
-+ 
-+-#: ../netstat.c:470
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr "CLOSE"
-+ 
-+-#: ../netstat.c:471
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr "CLOSE_WAIT"
-+ 
-+-#: ../netstat.c:472
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr "LAST_ACK"
-+ 
-+-#: ../netstat.c:473
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr "LISTEN"
-+ 
-+-#: ../netstat.c:474
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr "CLOSING"
-+ 
-+-#: ../netstat.c:544
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr "Warnung, fehlerhafte igmp6 line %d.\n"
-+ 
-+-#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
-+-#: ../netstat.c:935 ../netstat.c:940
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr "netstat: Nicht unterstützte Adressfamilie %d!\n"
-+ 
-+-#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr "Warnung, fehlerhafte igmp-Zeile %d.\n"
-+ 
-+-#: ../netstat.c:666
-++#: ../netstat.c:677
-++#, fuzzy, c-format
-++msgid "Active X.25 sockets\n"
-++msgstr "Aktive AX.25 Sockets\n"
-++
-++#. IMHO, Vr/Vs is not very usefull --SF
-++#: ../netstat.c:679
-++#, fuzzy, c-format
-++msgid ""
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-++msgstr "Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Empf-Q\n"
-++
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr "Warnung, fehlerhafte TCP Zeile.\n"
-+ 
-+-#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr "aus (0.00/%ld/%d)"
-+ 
-+-#: ../netstat.c:708
-++#: ../netstat.c:804
-+ #, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr "ein (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:713
-++#: ../netstat.c:809
-+ #, fuzzy, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr "ein%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:718
-++#: ../netstat.c:814
-+ #, fuzzy, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr "ein%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr "unkn-%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:799
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr "Warnung, fehlerhafe UDP-Zeile.\n"
-+ 
-+-#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr "UNBEKANNT"
-+ 
-+-#: ../netstat.c:860 ../netstat.c:980
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr "ein%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:949
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr "Warnung, fehlerhafte raw-Zeile.\n"
-+ 
-+-#: ../netstat.c:1028
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr "Warnung, fehlerhafte UNIX-Zeile.\n"
-+ 
-+-#: ../netstat.c:1055
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr "STREAM"
-+ 
-+-#: ../netstat.c:1059
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr "DGRAM"
-+ 
-+-#: ../netstat.c:1063
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr "RAW"
-+ 
-+-#: ../netstat.c:1067
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr "RDM"
-+ 
-+-#: ../netstat.c:1071
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+-msgstr "SEQPACKET"
-++msgstr "SEQPAKET"
-+ 
-+-#: ../netstat.c:1080
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr "FREI"
-+ 
-+-#: ../netstat.c:1096
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr "VERBINDUNGSAUFBAU"
-+ 
-+-#: ../netstat.c:1100
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr "VERBUNDEN"
-+ 
-+-#: ../netstat.c:1104
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr "VERBINDUNGSABBAU"
-+ 
-+-#: ../netstat.c:1135
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+-msgstr "Aktive Sockets in der UNIX Domäne "
-++msgstr "Aktive Sockets in der UNIX-Domäne "
-+ 
-+-#: ../netstat.c:1137 ../netstat.c:1666
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr "(Server und stehende Verbindungen)"
-+ 
-+-#: ../netstat.c:1140 ../netstat.c:1669
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr "(Nur Server)"
-+ 
-+-#: ../netstat.c:1142 ../netstat.c:1671
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr "(ohne Server)"
-+ 
-+-#: ../netstat.c:1145
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+@@ -975,90 +909,90 @@ msgstr ""
-+ "\n"
-+ "Proto RefZäh Flaggen     Typ        Zustand       I-Node"
-+ 
-+-#: ../netstat.c:1147
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr " Pfad\n"
-+ 
-+-#: ../netstat.c:1167
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr "SABM GESCHICKT"
-+ 
-+-#: ../netstat.c:1170
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr "WIEDERHERSTELLUNG"
-+ 
-+-#: ../netstat.c:1184
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr "Aktive AX.25 Sockets\n"
-+ 
-+-#: ../netstat.c:1185
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr "Ziel       Quelle     Gerät   Zustand      Vr/Vs    Send-Q  Empf-Q\n"
-+ 
-+-#: ../netstat.c:1228
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr "Problem beim Lesen von Daten von %s\n"
-+ 
-+-#: ../netstat.c:1279
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+ "State"
-+ msgstr ""
-+ "Aktive IPX Sockets\n"
-+-"Proto Recv-Q Send-Q Lokale Adresse             Gegenaddress               "
-++"Proto Recv-Q Send-Q Lokale Adresse             Gegenadresse               "
-+ "Zustand"
-+ 
-+-#: ../netstat.c:1281
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr " Benutzer"
-+ 
-+-#: ../netstat.c:1315
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr "VERBUNDEN"
-+ 
-+-#: ../netstat.c:1323
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr "UNB."
-+ 
-+-#: ../netstat.c:1367
-+-msgid "     - no statistics available -"
-+-msgstr "     - keine Statistiken verfügbar -"
-+-
-+-#: ../netstat.c:1370
-+-msgid "[NO FLAGS]"
-+-msgstr "[KEINE FLAGS]"
-+-
-+-#: ../netstat.c:1400
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+-msgstr "Kernel Schnittstellentabelle\n"
-++msgstr "Kernel-Schnittstellentabelle\n"
-+ 
-+-#: ../netstat.c:1401
-++#: ../netstat.c:1465
-++#, fuzzy, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+-"Flg\n"
-+-msgstr ""
-+-"SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-++msgstr "SStelle MTU Met    RX-OK RX-Feh RX-DRP RX-Ülf    TX-OK TX-Feh TX-DRP TX-Üb Flg\n"
-+ 
-+-#: ../netstat.c:1404
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+-msgstr "Fehlende Interfaceinformation"
-++msgstr "Fehlende Interfaceinformationen"
-+ 
-+-#: ../netstat.c:1425
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+ "Benutzung: netstat [-veenNcCF] [<Af>] -r\n"
-+ "           netstat {-V|--version|-h|--help}\n"
-+ 
-+-#: ../netstat.c:1426
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ 
-+-#: ../netstat.c:1427
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+@@ -1066,27 +1000,32 @@ msgstr ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1429
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr "        -r, --route              Routentabelle anzeigen\n"
-+ 
-+-#: ../netstat.c:1430
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr "        -i, --interfaces         Schnittstellentabelle auflisten\n"
-+ 
-+-#: ../netstat.c:1431
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr ""
-+ "        -g, --groups             Mitgliedschaft in Multicastgruppen "
-+ "anzeigen\n"
-+ 
-+-#: ../netstat.c:1432
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+ msgstr ""
-+ "        -s, --statistics         Netzwerksstatistiken anzeigen (wie SNMP)\n"
-+ 
-+-#: ../netstat.c:1434
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+@@ -1094,23 +1033,38 @@ msgstr ""
-+ "        -M, --masquerade         Maskierte Verbindungen auflisten\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1438 ../route.c:87
-++#: ../netstat.c:1505
-++#, fuzzy, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-++msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-++
-++#: ../netstat.c:1506
-++#, fuzzy, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-++msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-++
-++#: ../netstat.c:1507
-++#, fuzzy, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-++msgstr "        -n, --numeric            Adressen nicht nach Namen auflösen\n"
-++
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr "        -N, --symbolic           Hardwarenamen auflösen\n"
-+ 
-+-#: ../netstat.c:1439 ../route.c:88
-+-#, fuzzy
-++#: ../netstat.c:1509 ../route.c:88
-++#, fuzzy, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+-msgstr ""
-+-"        -e, --extend             Weitere / zusätzliche Informationen "
-+-"anzeigen\n"
-++msgstr "        -e, --extend             Weitere / zusätzliche Informationen anzeigen\n"
-+ 
-+-#: ../netstat.c:1440
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+-msgstr ""
-+-"        -p, --programs           PID/Programmnamen für Sockets anzeigen\n"
-++msgstr "        -p, --programs           PID/Programmnamen für Sockets anzeigen\n"
-+ 
-+-#: ../netstat.c:1441
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+@@ -1118,24 +1072,27 @@ msgstr ""
-+ "        -c, --continuous         Anzeige laufend aktualisieren\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1442
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+ msgstr ""
-+ "        -l, --listening          Empfangsbereite Serversockets auflisten\n"
-+ 
-+-#: ../netstat.c:1443
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+ msgstr ""
-+ "        -a, --all, --listening   Alle Sockets anzeigen (normal: nur "
-+ "verbundene)\n"
-+ 
-+-#: ../netstat.c:1444
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr "        -o, --timers             Timer auflisten\n"
-+ 
-+-#: ../netstat.c:1445 ../route.c:89
-+-#, fuzzy
-++#: ../netstat.c:1515 ../route.c:89
-++#, fuzzy, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+@@ -1143,7 +1100,8 @@ msgstr ""
-+ "        -F, --fib                Forwarding Infomation Base anzeigen "
-+ "(Standard)\n"
-+ 
-+-#: ../netstat.c:1446 ../route.c:90
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+@@ -1151,110 +1109,118 @@ msgstr ""
-+ "        -C, --cache              Routencache statt FIB anzeigen\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1448
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ 
-+-#: ../netstat.c:1449 ../route.c:92
-+-#, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-++#: ../netstat.c:1519
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr "  <AF>=,,-A <af>'' or ,,--<af>'' benutzen. Standard: %s\n"
-+ 
-+-#: ../netstat.c:1450 ../route.c:93
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+ msgstr "  Liste möglicher Adressfamilien, die Routen unterstützen:\n"
-+ 
-+-#: ../netstat.c:1663
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr "Aktive Internetverbindungen "
-+ 
-+-#: ../netstat.c:1673
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ 
-+-#: ../netstat.c:1675
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr " Benutzer   Inode     "
-+ 
-+-#: ../netstat.c:1678
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr " Timer"
-+ 
-+-#: ../netstat.c:1708
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+-msgstr "IPv4 Gruppenmitgliedschaften\n"
-++msgstr "IPv4-Gruppenmitgliedschaften\n"
-+ 
-+-#: ../netstat.c:1709
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr "Schnittstelle   RefZäh Grupp\n"
-+ 
-+-#: ../rarp.c:43
-++#: ../rarp.c:44
-+ msgid "This kernel does not support RARP.\n"
-+ msgstr "Dieser Kernel unterstützt kein RARP.\n"
-+ 
-+-#: ../rarp.c:82
-++#: ../rarp.c:83
-+ #, c-format
-+ msgid "no RARP entry for %s.\n"
-+-msgstr "Kein RARP Eintrag für %s.\n"
-++msgstr "Kein RARP-Eintrag für %s.\n"
-+ 
-+-#: ../rarp.c:95
-++#: ../rarp.c:96
-+ #, c-format
-+ msgid "%s: bad hardware address\n"
-+ msgstr "%s: fehlerhafte Hardwareadresse\n"
-+ 
-+-#: ../rarp.c:127
-++#: ../rarp.c:128
-+ #, c-format
-+ msgid "rarp: cannot open file %s:%s.\n"
-+ msgstr "rarp: kann Datei %s:%s nicht öffnen.\n"
-+ 
-+-#: ../rarp.c:139
-++#: ../rarp.c:140
-+ #, c-format
-+ msgid "rarp: format error at %s:%u\n"
-+ msgstr "rarp: Formatfehler bei %s:%u\n"
-+ 
-+-#: ../rarp.c:143 ../rarp.c:287
-++#: ../rarp.c:144 ../rarp.c:289
-+ #, c-format
-+ msgid "rarp: %s: unknown host\n"
-+ msgstr "rarp: %s: Unbekannter Host\n"
-+ 
-+-#: ../rarp.c:146
-++#: ../rarp.c:147
-+ #, c-format
-+ msgid "rarp: cannot set entry from %s:%u\n"
-+ msgstr "rarp: Kann Eintrag aus %s:%u nicht setzen.\n"
-+ 
-+-#: ../rarp.c:175
-++#: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+-msgstr ""
-+-"Benutzung: rarp -a                               Einträge im Cache listen.\n"
-++msgstr "Benutzung: rarp -a                               Einträge im Cache listen.\n"
-+ 
-+-#: ../rarp.c:176
-++#: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+-msgstr ""
-+-"       rarp -d <hostname>                    Eintrag aus dem Cache löschen.\n"
-++msgstr "       rarp -d <hostname>                    Eintrag aus dem Cache löschen.\n"
-+ 
-+-#: ../rarp.c:177
-++#: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+-msgstr ""
-+-"       rarp [<HW>] -s <hostname> <hwaddr>    Eintrag zum Cache zufügen.\n"
-++msgstr "       rarp [<HW>] -s <hostname> <hwaddr>    Eintrag zum Cache zufügen.\n"
-+ 
-+-#: ../rarp.c:178
-++#: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+-msgstr ""
-+-"       rarp -f                               Einträge aus /etc/ethers "
-+-"zufügen.\n"
-++msgstr "       rarp -f                               Einträge aus /etc/ethers zufügen.\n"
-+ 
-+-#: ../rarp.c:179
-++#: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+@@ -1262,24 +1228,26 @@ msgstr ""
-+ "       rarp -V                               Programmversion anzeigen.\n"
-+ "\n"
-+ 
-+-#: ../rarp.c:236
-++#: ../rarp.c:238
-+ #, c-format
-+ msgid "%s: illegal option mix.\n"
-+ msgstr "%s: Unerlaubte Mischung von Optionen.\n"
-+ 
-+-#: ../rarp.c:267
-++#: ../rarp.c:269
-+ #, c-format
-+ msgid "rarp: %s: unknown hardware type.\n"
-+-msgstr "rarp: %s: unknown hardware type.\n"
-++msgstr "rarp: %s: unbekannter Hardwaretyp.\n"
-+ 
-+-#: ../route.c:79
-++#: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+ "Benutzung: route [-nNvee] [-FC] [<AF>]           Kernelroutentabelle "
-+ "anzeigen\n"
-+ 
-+-#: ../route.c:80
-++#: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+@@ -1287,14 +1255,15 @@ msgstr ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Routentabelle für AF ändern.\n"
-+ "\n"
-+ 
-+-#: ../route.c:82
-++#: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+-msgstr ""
-+-"       route {-h|--help} [<AF>]              Genaue Syntax für AF anzeigen.\n"
-++msgstr "       route {-h|--help} [<AF>]              Genaue Syntax für AF anzeigen.\n"
-+ 
-+-#: ../route.c:83
-++#: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+@@ -1304,590 +1273,891 @@ msgstr ""
-+ "Ende.\n"
-+ "\n"
-+ 
-++#: ../route.c:92
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>=,,-A <af>'' or ,,--<af>'' benutzen. Standard: %s\n"
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr "Benutzung: plipconfig [-a] [-i] [-v] Interface\n"
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr "                  [nibble NN] [trigger NN]\n"
-+ 
-+ #: ../plipconfig.c:68
-+-#, fuzzy
-++#, c-format
-+ msgid "       plipconfig -V | --version\n"
-+-msgstr "       plipconfig -V\n"
-++msgstr "       plipconfig -V | --version\n"
-+ 
-+ #: ../plipconfig.c:74
-+ #, c-format
-+ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr "%s\tnibble %lu  trigger %lu\n"
-+ 
-+-#: ../iptunnel.c:79
-++#: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr "Benutzung: iptunnel { add | change | del | show } [ NAME ]\n"
-+ 
-+-#: ../iptunnel.c:80
-++#: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+ msgstr "          [ mode { ipip | gre | sit } ] [ remote ADR ] [ local ADR ]\n"
-+ 
-+-#: ../iptunnel.c:81
-++#: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr "          [ [i|o]seq ] [ [i|o]key SCHLÜSSEL ] [ [i|o]csum ]\n"
-+ 
-+-#: ../iptunnel.c:82
-+-#, fuzzy
-++#: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+-msgstr ""
-+-"          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_GERÄt ]\n"
-+-"\n"
-++msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_GERÄt ]\n"
-+ 
-+-#: ../iptunnel.c:83
-++#: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+ msgstr ""
-++"       iptunnel -V | --version\n"
-++"\n"
-+ 
-+-#: ../iptunnel.c:84
-++#: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr "Wobei: NAME := ZEICHENKETTE\n"
-+ 
-+-#: ../iptunnel.c:85
-++#: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr "       ADR := { IP_ADRESSE | any }\n"
-+ 
-+-#: ../iptunnel.c:86
-++#: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr "       TOS  := { NUMBER | inherit }\n"
-+ 
-+-#: ../iptunnel.c:87
-++#: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr "       TTL  := { 1..255 | inherit }\n"
-+ 
-+-#: ../iptunnel.c:88
-++#: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr "       KEY  := { DOTTED_QUAD | ZAHL }\n"
-+ 
-+-#: ../iptunnel.c:326
-++#: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr "Schlüssel sind mit ipip und sit nicht erlaubt.\n"
-+ 
-+-#: ../iptunnel.c:346
-++#: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr "Ein Broadcasttunnel ist nur mit einer Quelladresse möglich\n"
-+ 
-+-#: ../iptunnel.c:361
-++#: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr "ttl != 0 und noptmudisc sind inkompatibel\n"
-+ 
-+-#: ../iptunnel.c:373
-++#: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr ""
-+ "Die Tunnelbetriebsart (ipip, fre oder sit) kann nicht festgestellt werden\n"
-+ 
-+-#: ../iptunnel.c:411
-++#: ../iptunnel.c:417
-+ #, c-format
-+ msgid "%s: %s/ip  remote %s  local %s "
-+ msgstr "%s: %s/ip  Gegenseite %s  lokal %s "
-+ 
-+-#: ../iptunnel.c:415
-++#: ../iptunnel.c:421
-+ msgid "unknown"
-+ msgstr "Unbekannt"
-+ 
-+-#: ../iptunnel.c:447
-++#: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr "  Pakete außer der Reihenfolge fallenlassen.\n"
-+ 
-+-#: ../iptunnel.c:449
-++#: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr "  Prüfsumme im empfangenen Paket wird benötigt.\n"
-+ 
-+-#: ../iptunnel.c:451
-++#: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr "  Pakete in Reihenfolge ausgeben.\n"
-+ 
-+-#: ../iptunnel.c:453
-++#: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr "  Prüfsumme für ausgegebene Pakete berechnen.\n"
-+ 
-+-#: ../iptunnel.c:481
-++#: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+-msgstr "Falsches Format von /proc/net/dev. Tut mir leid\n"
-++msgstr "Falsches Format von /proc/net/dev. Tut mir leid.\n"
-+ 
-+-#: ../iptunnel.c:494
-++#: ../iptunnel.c:500
-+ #, c-format
-+ msgid "Failed to get type of [%s]\n"
-+ msgstr "Kann den Typ von [%s] nicht holen\n"
-+ 
-+-#: ../iptunnel.c:510
-++#: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr "RX: Pakete     Bytes        Fehler CsumErrs OutOfSeq Mcasts\n"
-+ 
-+-#: ../iptunnel.c:513
-++#: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr "TX: Pakete     Bytes        Fehler DeadLoop NoRoute  NoBufs\n"
-+ 
-+-#: ../statistics.c:45
-++#: ../statistics.c:47
-+ msgid "ICMP input histogram:"
-+-msgstr "ICMP Eingabehistogramm:"
-++msgstr "ICMP-Eingabehistogramm:"
-+ 
-+-#: ../statistics.c:46
-++#: ../statistics.c:48
-+ msgid "ICMP output histogram:"
-+-msgstr "ICMP Ausgabehistogramm:"
-++msgstr "ICMP-Ausgabehistogramm:"
-+ 
-+-#: ../statistics.c:63
-++#: ../statistics.c:65
-+ #, c-format
-+ msgid "Forwarding is %s"
-+ msgstr "Weiterleitung ist %s"
-+ 
-+-#: ../statistics.c:64
-+-#, c-format
-+-msgid "Default TTL is %d"
-++#: ../statistics.c:66
-++#, fuzzy, c-format
-++msgid "Default TTL is %u"
-+ msgstr "Standard-TTL ist %d"
-+ 
-+-#: ../statistics.c:65
-+-#, c-format
-+-msgid "%d total packets received"
-+-msgstr "%d Pakete insgesamt empfangen"
-++#: ../statistics.c:67
-++#, fuzzy, c-format
-++msgid "%u total packets received"
-++msgstr "%d Pakete insgesamt empfangen"
-+ 
-+-#: ../statistics.c:66
-+-#, c-format
-+-msgid "%d with invalid headers"
-+-msgstr "%d with ungültigen Headern"
-++#: ../statistics.c:68
-++#, fuzzy, c-format
-++msgid "%u with invalid headers"
-++msgstr "%d mit ungültigen Headern"
-+ 
-+-#: ../statistics.c:67
-+-#, c-format
-+-msgid "%d with invalid addresses"
-++#: ../statistics.c:69
-++#, fuzzy, c-format
-++msgid "%u with invalid addresses"
-+ msgstr "%d mit ungültigen Adressen"
-+ 
-+-#: ../statistics.c:68
-+-#, c-format
-+-msgid "%d forwarded"
-++#: ../statistics.c:70
-++#, fuzzy, c-format
-++msgid "%u forwarded"
-+ msgstr "%d weitergeleitet"
-+ 
-+-#: ../statistics.c:69
-+-#, c-format
-+-msgid "%d with unknown protocol"
-++#: ../statistics.c:71
-++#, fuzzy, c-format
-++msgid "%u with unknown protocol"
-+ msgstr "%d mit unbekanntem Protokoll"
-+ 
-+-#: ../statistics.c:70
-+-#, c-format
-+-msgid "%d incoming packets discarded"
-++#: ../statistics.c:72
-++#, fuzzy, c-format
-++msgid "%u incoming packets discarded"
-+ msgstr "%d eingehende Pakete weggeworfen"
-+ 
-+-#: ../statistics.c:71
-+-#, c-format
-+-msgid "%d incoming packets delivered"
-++#: ../statistics.c:73
-++#, fuzzy, c-format
-++msgid "%u incoming packets delivered"
-+ msgstr "%d eingehende Pakete zugestellt"
-+ 
-+-#: ../statistics.c:72
-+-#, c-format
-+-msgid "%d requests sent out"
-++#: ../statistics.c:74
-++#, fuzzy, c-format
-++msgid "%u requests sent out"
-+ msgstr "%d Anfragen ausgesandt"
-+ 
-+ #. ?
-+-#: ../statistics.c:73
-+-#, c-format
-+-msgid "%d outgoing packets dropped"
-++#: ../statistics.c:75
-++#, fuzzy, c-format
-++msgid "%u outgoing packets dropped"
-+ msgstr "%d ausgehende Pakete weggeworfen"
-+ 
-+-#: ../statistics.c:74
-+-#, c-format
-+-msgid "%d dropped because of missing route"
-++#: ../statistics.c:76
-++#, fuzzy, c-format
-++msgid "%u dropped because of missing route"
-+ msgstr "%d weggeworfen wegen fehlender Route"
-+ 
-+-#: ../statistics.c:75
-+-#, c-format
-+-msgid "%d fragments dropped after timeout"
-++#: ../statistics.c:77
-++#, fuzzy, c-format
-++msgid "%u fragments dropped after timeout"
-+ msgstr "%d Fragmente nach Timeout weggeworfen"
-+ 
-+-#: ../statistics.c:76
-+-#, c-format
-+-msgid "%d reassemblies required"
-++#: ../statistics.c:78
-++#, fuzzy, c-format
-++msgid "%u reassemblies required"
-+ msgstr "%d Wiederzusammenstellungen nötig"
-+ 
-+ #. ?
-+-#: ../statistics.c:77
-+-#, c-format
-+-msgid "%d packets reassembled ok"
-++#: ../statistics.c:79
-++#, fuzzy, c-format
-++msgid "%u packets reassembled ok"
-+ msgstr "%d Fragmente korrekt empfangen"
-+ 
-+-#: ../statistics.c:78
-+-#, c-format
-+-msgid "%d packet reassembles failed"
-++#: ../statistics.c:80
-++#, fuzzy, c-format
-++msgid "%u packet reassembles failed"
-+ msgstr "%d fehlgeschlagene Paketdefragmentierungen"
-+ 
-+-#: ../statistics.c:79
-+-#, c-format
-+-msgid "%d fragments received ok"
-++#: ../statistics.c:81
-++#, fuzzy, c-format
-++msgid "%u fragments received ok"
-+ msgstr "%d Fragmente korrekt empfangen"
-+ 
-+-#: ../statistics.c:80
-+-#, c-format
-+-msgid "%d fragments failed"
-+-msgstr "%d Fragmente Fehlgeschlagen"
-++#: ../statistics.c:82
-++#, fuzzy, c-format
-++msgid "%u fragments failed"
-++msgstr "%d Fragmente fehlgeschlagen"
-+ 
-+-#: ../statistics.c:81
-+-#, c-format
-+-msgid "%d fragments created"
-++#: ../statistics.c:83
-++#, fuzzy, c-format
-++msgid "%u fragments created"
-+ msgstr "%d Fragmente erzeugt"
-+ 
-+-#: ../statistics.c:86
-+-#, c-format
-+-msgid "%d ICMP messages received"
-+-msgstr "%d ICMP Nachrichten empfangen"
-++#: ../statistics.c:88
-++#, fuzzy, c-format
-++msgid "%u ICMP messages received"
-++msgstr "%d ICMP-Nachrichten empfangen"
-+ 
-+-#: ../statistics.c:87
-+-#, c-format
-+-msgid "%d input ICMP message failed."
-+-msgstr "%d eingegangene ICMP Nachrichten fehlgeschlagen"
-++#: ../statistics.c:89
-++#, fuzzy, c-format
-++msgid "%u input ICMP message failed."
-++msgstr "%d eingegangene ICMP-Nachrichten fehlgeschlagen"
-+ 
-+-#: ../statistics.c:88 ../statistics.c:101
-+-#, c-format
-+-msgid "destination unreachable: %d"
-++#: ../statistics.c:90 ../statistics.c:103
-++#, fuzzy, c-format
-++msgid "destination unreachable: %u"
-+ msgstr "Ziel unerreichbar: %d"
-+ 
-+-#: ../statistics.c:89
-+-#, c-format
-+-msgid "timeout in transit: %d"
-++#: ../statistics.c:91
-++#, fuzzy, c-format
-++msgid "timeout in transit: %u"
-+ msgstr "Timeout beim Transit: %d"
-+ 
-+-#: ../statistics.c:90 ../statistics.c:103
-+-#, c-format
-+-msgid "wrong parameters: %d"
-++#: ../statistics.c:92 ../statistics.c:105
-++#, fuzzy, c-format
-++msgid "wrong parameters: %u"
-+ msgstr "Fehlerhafte Parameter: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:91
-+-#, c-format
-+-msgid "source quenchs: %d"
-++#: ../statistics.c:93
-++#, fuzzy, c-format
-++msgid "source quenches: %u"
-+ msgstr "Source Quenchs: %d"
-+ 
-+-#: ../statistics.c:92
-+-#, c-format
-+-msgid "redirects: %d"
-++#: ../statistics.c:94
-++#, fuzzy, c-format
-++msgid "redirects: %u"
-+ msgstr "Umleitungen: %d"
-+ 
-+-#: ../statistics.c:93
-+-#, c-format
-+-msgid "echo requests: %d"
-+-msgstr "Echo Requests: %d"
-++#: ../statistics.c:95
-++#, fuzzy, c-format
-++msgid "echo requests: %u"
-++msgstr "Echo Anfragen: %d"
-+ 
-+-#: ../statistics.c:94 ../statistics.c:107
-+-#, c-format
-+-msgid "echo replies: %d"
-++#: ../statistics.c:96 ../statistics.c:109
-++#, fuzzy, c-format
-++msgid "echo replies: %u"
-+ msgstr "Echo Antworten: %d"
-+ 
-+-#: ../statistics.c:95
-+-#, c-format
-+-msgid "timestamp request: %d"
-++#: ../statistics.c:97
-++#, fuzzy, c-format
-++msgid "timestamp request: %u"
-+ msgstr "Zeitstempelanfragen: %d"
-+ 
-+-#: ../statistics.c:96
-+-#, c-format
-+-msgid "timestamp reply: %d"
-++#: ../statistics.c:98
-++#, fuzzy, c-format
-++msgid "timestamp reply: %u"
-+ msgstr "Zeitstempelantworten: %d"
-+ 
-+-#: ../statistics.c:97
-+-#, c-format
-+-msgid "address mask request: %d"
-++#: ../statistics.c:99
-++#, fuzzy, c-format
-++msgid "address mask request: %u"
-+ msgstr "Adressmaskenanfragen: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:98
-+-msgid "address mask replies"
-+-msgstr "Adressmaskenantworten"
-++#: ../statistics.c:100 ../statistics.c:113
-++#, fuzzy, c-format
-++msgid "address mask replies: %u"
-++msgstr "Adressmaskenantworten: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:99
-+-#, c-format
-+-msgid "%d ICMP messages sent"
-++#: ../statistics.c:101
-++#, fuzzy, c-format
-++msgid "%u ICMP messages sent"
-+ msgstr "%d ICMP-Nachrichten geschickt"
-+ 
-+-#: ../statistics.c:100
-+-#, c-format
-+-msgid "%d ICMP messages failed"
-+-msgstr "%d ICMP Nachrichten fehlgeschlagen"
-+-
-+ #: ../statistics.c:102
-+-#, c-format
-+-msgid "time exceeded: %d"
-++#, fuzzy, c-format
-++msgid "%u ICMP messages failed"
-++msgstr "%d ICMP-Nachrichten fehlgeschlagen"
-++
-++#: ../statistics.c:104
-++#, fuzzy, c-format
-++msgid "time exceeded: %u"
-+ msgstr "Zeitüberschreitung: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:104
-+-#, c-format
-+-msgid "source quench: %d"
-++#: ../statistics.c:106
-++#, fuzzy, c-format
-++msgid "source quench: %u"
-+ msgstr "Source Quench: %d"
-+ 
-+-#: ../statistics.c:105
-+-#, c-format
-+-msgid "redirect: %d"
-++#: ../statistics.c:107
-++#, fuzzy, c-format
-++msgid "redirect: %u"
-+ msgstr "Umleitungen: %d"
-+ 
-+-#: ../statistics.c:106
-+-#, c-format
-+-msgid "echo request: %d"
-++#: ../statistics.c:108
-++#, fuzzy, c-format
-++msgid "echo request: %u"
-+ msgstr "Echo Anfragen: %d"
-+ 
-+-#: ../statistics.c:108
-+-#, c-format
-+-msgid "timestamp requests: %d"
-++#: ../statistics.c:110
-++#, fuzzy, c-format
-++msgid "timestamp requests: %u"
-+ msgstr "Zeitstempel Anfragen: %d"
-+ 
-+-#: ../statistics.c:109
-+-#, c-format
-+-msgid "timestamp replies: %d"
-++#: ../statistics.c:111
-++#, fuzzy, c-format
-++msgid "timestamp replies: %u"
-+ msgstr "Zeitstempel Antworten: %d"
-+ 
-+-#: ../statistics.c:110
-+-#, c-format
-+-msgid "address mask requests: %d"
-++#: ../statistics.c:112
-++#, fuzzy, c-format
-++msgid "address mask requests: %u"
-+ msgstr "Adressmaskenanfragen: %d"
-+ 
-+-#: ../statistics.c:111
-++#: ../statistics.c:118
-+ #, c-format
-+-msgid "address mask replies: %d"
-+-msgstr "Adressmaskenantworten: %d"
-++msgid "RTO algorithm is %s"
-++msgstr "RTO-Algorithmus ist %s"
-++
-++#: ../statistics.c:122
-++#, fuzzy, c-format
-++msgid "%u active connections openings"
-++msgstr "%d Verbindungen aktiv geöffnet"
-++
-++#: ../statistics.c:123
-++#, fuzzy, c-format
-++msgid "%u passive connection openings"
-++msgstr "%d Verbindungen passiv geöffnet"
-++
-++#: ../statistics.c:124
-++#, fuzzy, c-format
-++msgid "%u failed connection attempts"
-++msgstr "%d fehlerhafte Verbindungsversuche"
-++
-++#: ../statistics.c:125
-++#, fuzzy, c-format
-++msgid "%u connection resets received"
-++msgstr "%d Verbindungsrücksetzungen empfangen"
-++
-++#: ../statistics.c:126
-++#, fuzzy, c-format
-++msgid "%u connections established"
-++msgstr "%d Verbindungen aufgebaut"
-++
-++#: ../statistics.c:127
-++#, fuzzy, c-format
-++msgid "%u segments received"
-++msgstr "%d Segmente empfangen"
-++
-++#: ../statistics.c:128
-++#, fuzzy, c-format
-++msgid "%u segments send out"
-++msgstr "%d Segmente abgeschickt"
-++
-++#: ../statistics.c:129
-++#, fuzzy, c-format
-++msgid "%u segments retransmited"
-++msgstr "%d Segmente erneut geschickt"
-++
-++#: ../statistics.c:130
-++#, fuzzy, c-format
-++msgid "%u bad segments received."
-++msgstr "%d fehlerhafte Segmente empfangen."
-++
-++#: ../statistics.c:131
-++#, fuzzy, c-format
-++msgid "%u resets sent"
-++msgstr "%d Rücksetzungen geschickt"
-++
-++#: ../statistics.c:136
-++#, fuzzy, c-format
-++msgid "%u packets received"
-++msgstr "%d Pakete empfangen"
-++
-++#: ../statistics.c:137
-++#, fuzzy, c-format
-++msgid "%u packets to unknown port received."
-++msgstr "%d Pakete für unbekannte Ports empfangen."
-++
-++#: ../statistics.c:138
-++#, fuzzy, c-format
-++msgid "%u packet receive errors"
-++msgstr "%d Paketempfangsfehler"
-++
-++#: ../statistics.c:139
-++#, fuzzy, c-format
-++msgid "%u packets sent"
-++msgstr "%d Pakete geschickt"
-++
-++#: ../statistics.c:144
-++#, fuzzy, c-format
-++msgid "%u SYN cookies sent"
-++msgstr "%d SYN-Cookies verschickt"
-++
-++#: ../statistics.c:145
-++#, fuzzy, c-format
-++msgid "%u SYN cookies received"
-++msgstr "%d SYN-Cookies empfangen"
-+ 
-+-#: ../statistics.c:116
-++#: ../statistics.c:146
-++#, fuzzy, c-format
-++msgid "%u invalid SYN cookies received"
-++msgstr "%d ungültige SYN-Cookies empfangen"
-++
-++#: ../statistics.c:148
-++#, fuzzy, c-format
-++msgid "%u resets received for embryonic SYN_RECV sockets"
-++msgstr "%d Rücksetzungen für embrionische SYN_RECV-Sockets"
-++
-++#: ../statistics.c:150
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue because of socket buffer overrun"
-++msgstr "%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange weggeworfen"
-++
-++#. obsolete: 2.2.0 doesn't do that anymore
-++#: ../statistics.c:153
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue"
-++msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-++
-++#: ../statistics.c:154
-++#, fuzzy, c-format
-++msgid ""
-++"%u packets dropped from out-of-order queue because of socket buffer overrun"
-++msgstr "%d Pakete aus der ungeordneten Warteschlange wegen Pufferüberlauf weggeworfen"
-++
-++#: ../statistics.c:156
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because they were out-of-window"
-++msgstr "%d ICMP-Pakete weggeworfen die außerhalb des Fensters waren"
-++
-++#: ../statistics.c:158
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because socket was locked"
-++msgstr "%d ICMP-Pakete verworfen weil Socket gesperrt war"
-++
-++#: ../statistics.c:160
-+ #, c-format
-+-msgid "RTO algorithm is %s"
-+-msgstr "RTO Algorithmus is %s"
-++msgid "%u TCP sockets finished time wait in fast timer"
-++msgstr ""
-+ 
-+-#: ../statistics.c:120
-++#: ../statistics.c:161
-+ #, c-format
-+-msgid "%d active connections openings"
-+-msgstr "%d Verbindungen aktiv geöffnet"
-++msgid "%u time wait sockets recycled by time stamp"
-++msgstr ""
-+ 
-+-#: ../statistics.c:121
-++#: ../statistics.c:162
-+ #, c-format
-+-msgid "%d passive connection openings"
-+-msgstr "%d Verbindungen passiv geöffnet"
-++msgid "%u TCP sockets finished time wait in slow timer"
-++msgstr ""
-+ 
-+-#: ../statistics.c:122
-++#: ../statistics.c:163
-+ #, c-format
-+-msgid "%d failed connection attempts"
-+-msgstr "%d fehlerhafte Verbindungsversuche"
-++msgid "%u passive connections rejected because of time stamp"
-++msgstr ""
-+ 
-+-#: ../statistics.c:123
-++#: ../statistics.c:165
-+ #, c-format
-+-msgid "%d connection resets received"
-+-msgstr "%d Verbindungsrücksetzungen empfangen"
-++msgid "%u active connections rejected because of time stamp"
-++msgstr ""
-+ 
-+-#: ../statistics.c:124
-++#: ../statistics.c:167
-+ #, c-format
-+-msgid "%d connections established"
-+-msgstr "%d Verbindungen aufgebaut"
-++msgid "%u packets rejects in established connections because of timestamp"
-++msgstr ""
-+ 
-+-#: ../statistics.c:125
-++#: ../statistics.c:169
-++#, fuzzy, c-format
-++msgid "%u delayed acks sent"
-++msgstr "%d Pakete geschickt"
-++
-++#: ../statistics.c:170
-+ #, c-format
-+-msgid "%d segments received"
-+-msgstr "%d Segmente empfangen"
-++msgid "%u delayed acks further delayed because of locked socket"
-++msgstr ""
-+ 
-+-#: ../statistics.c:126
-++#: ../statistics.c:172
-+ #, c-format
-+-msgid "%d segments send out"
-+-msgstr "%d Segmente abgeschickt"
-++msgid "Quick ack mode was activated %u times"
-++msgstr ""
-+ 
-+-#: ../statistics.c:127
-++#: ../statistics.c:173
-+ #, c-format
-+-msgid "%d segments retransmited"
-+-msgstr "%d Segmente erneut geschickt"
-++msgid "%u times the listen queue of a socket overflowed"
-++msgstr ""
-+ 
-+-#: ../statistics.c:128
-++#: ../statistics.c:175
-+ #, c-format
-+-msgid "%d bad segments received."
-+-msgstr "%d fehlerhafte Segmente empfangen."
-++msgid "%u SYNs to LISTEN sockets ignored"
-++msgstr ""
-+ 
-+-#: ../statistics.c:129
-++#: ../statistics.c:176
-+ #, c-format
-+-msgid "%d resets sent"
-+-msgstr "%d Rücksetzungen geschickt"
-++msgid "%u packets directly queued to recvmsg prequeue."
-++msgstr ""
-+ 
-+-#: ../statistics.c:134
-++#: ../statistics.c:178
-+ #, c-format
-+-msgid "%d packets received"
-++msgid "%u of bytes directly received from backlog"
-++msgstr ""
-++
-++#: ../statistics.c:180
-++#, c-format
-++msgid "%u of bytes directly received from prequeue"
-++msgstr ""
-++
-++#: ../statistics.c:182
-++#, fuzzy, c-format
-++msgid "%u packets dropped from prequeue"
-++msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-++
-++#: ../statistics.c:183
-++#, fuzzy, c-format
-++msgid "%u packet headers predicted"
-+ msgstr "%d Pakete empfangen"
-+ 
-+-#: ../statistics.c:135
-++#: ../statistics.c:184
-+ #, c-format
-+-msgid "%d packets to unknown port received."
-++msgid "%u packets header predicted and directly queued to user"
-++msgstr ""
-++
-++#: ../statistics.c:186
-++#, c-format
-++msgid "Ran %u times out of system memory during packet sending"
-++msgstr ""
-++
-++#: ../statistics.c:188
-++#, fuzzy, c-format
-++msgid "%u acknowledgments not containing data received"
-+ msgstr "%d Pakete für unbekannte Ports empfangen."
-+ 
-+-#: ../statistics.c:136
-++#: ../statistics.c:189
-+ #, c-format
-+-msgid "%d packet receive errors"
-+-msgstr "%d Paketempfangsfehler"
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-+ 
-+-#: ../statistics.c:137
-++#: ../statistics.c:190
-+ #, c-format
-+-msgid "%d packets sent"
-+-msgstr "%d Pakete geschickt"
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-+ 
-+-#: ../statistics.c:142
-++#: ../statistics.c:191
-+ #, c-format
-+-msgid "%d SYN cookies sent"
-+-msgstr "%d SYN-Cookies verschickt"
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-+ 
-+-#: ../statistics.c:143
-++#: ../statistics.c:192
-++#, fuzzy, c-format
-++msgid "%u bad SACKs received"
-++msgstr "%d fehlerhafte Segmente empfangen."
-++
-++#: ../statistics.c:193
-+ #, c-format
-+-msgid "%d SYN cookies received"
-+-msgstr "%d SYN-Cookies empfangen"
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-+ 
-+-#: ../statistics.c:144
-++#: ../statistics.c:194
-+ #, c-format
-+-msgid "%d invalid SYN cookies received"
-+-msgstr "%d ungültige SYN-Cookies empfangen"
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-+ 
-+-#: ../statistics.c:146
-++#: ../statistics.c:195
-+ #, c-format
-+-msgid "%d resets received for embryonic SYN_RECV sockets"
-+-msgstr "%d Rücksetzungen fuer embrionische SYN_RECV Sockets"
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-+ 
-+-#: ../statistics.c:148
-++#: ../statistics.c:196
-+ #, c-format
-+-msgid "%d packets pruned from receive queue because of socket buffer overrun"
-++msgid "Detected reordering %u times using reno fast retransmit"
-+ msgstr ""
-+-"%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange "
-+-"weggeworfen"
-+ 
-+-#. obsolete: 2.2.0 doesn't do that anymore
-+-#: ../statistics.c:151
-++#: ../statistics.c:197
-+ #, c-format
-+-msgid "%d packets pruned from out-of-order queue"
-+-msgstr "%d Pakete aus der ungeordneten Warteschlange weggeworfen"
-++msgid "%u congestion windows fully recovered"
-++msgstr ""
-+ 
-+-#: ../statistics.c:152
-++#: ../statistics.c:198
-+ #, c-format
-+-msgid ""
-+-"%d packets dropped from out-of-order queue because of socket buffer overrun"
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-+ msgstr ""
-+-"%d Pakete aus der ungeordneten Warteschlange wegen Pufferüberlauf weggeworfen"
-+ 
-+-#: ../statistics.c:154
-++#: ../statistics.c:199
-+ #, c-format
-+-msgid "%d ICMP packets dropped because they were out-of-window"
-+-msgstr "%d ICMP Pakete weggeworfen die auserhalb des Fensters waren"
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-+ 
-+-#: ../statistics.c:156
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, fuzzy, c-format
-++msgid "%u retransmits lost"
-++msgstr "%d Rücksetzungen geschickt"
-++
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, fuzzy, c-format
-++msgid "%u fast retransmits"
-++msgstr "%d Segmente erneut geschickt"
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, fuzzy, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "%d Segmente erneut geschickt"
-++
-++#: ../statistics.c:210
-++#, fuzzy, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "%d fehlgeschlagene Paketdefragmentierungen"
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, fuzzy, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr "%d Pakete wegen Socketpufferüberlauf aus der Empfangswarteschlange weggeworfen"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, fuzzy, c-format
-++msgid "%u DSACKs received"
-++msgstr "%d Pakete empfangen"
-++
-++#: ../statistics.c:216
-++#, fuzzy, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "%d Pakete insgesamt empfangen"
-++
-++#: ../statistics.c:217
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "%d Verbindungsrücksetzungen empfangen"
-++
-++#: ../statistics.c:218
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "%d Verbindungsrücksetzungen empfangen"
-++
-++#: ../statistics.c:219
-++#, fuzzy, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "%d Verbindungsrücksetzungen empfangen"
-++
-++#: ../statistics.c:220
-+ #, c-format
-+-msgid "%d ICMP packets dropped because socket was locked"
-+-msgstr "%d ICMP Pakete verworfen weil Socket gesperrt war"
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, fuzzy, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "%d Verbindungsrücksetzungen empfangen"
-+ 
-+ #: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr "aktiviert"
-+ 
-+-#: ../statistics.c:222
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr "deaktiviert"
-+ 
-+-#: ../statistics.c:272
-+-#, c-format
-+-msgid "unknown title %s\n"
-+-msgstr "Unbekannter Titel %s\n"
-+-
-+-#: ../statistics.c:298
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr "Fehler beim Parsen von /proc/net/snmp"
-+ 
-+-#: ../statistics.c:311
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr "Kann /proc/net/snmp nicht öffnen"
-+ 
-+ #: ../lib/activate.c:69
-+ #, c-format
-+ msgid "Hardware type `%s' not supported.\n"
-+-msgstr "Hardwaretyp ,,%s'' nicht unterstützt.\n"
-++msgstr "Hardwaretyp »%s« nicht unterstützt.\n"
-+ 
-+ #: ../lib/activate.c:73
-+ #, c-format
-+ msgid "Cannot change line discipline to `%s'.\n"
-+-msgstr "Kann line discipline nicht auf ``%s'' setzen.\n"
-++msgstr "Kann line discipline nicht auf »%s« setzen.\n"
-+ 
-+-#: ../lib/af.c:145 ../lib/hw.c:148
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr "UNSPEC"
-+ 
-+-#: ../lib/af.c:147
-++#: ../lib/af.c:155
-+ msgid "UNIX Domain"
-+-msgstr "UNIX Domain"
-++msgstr "UNIX-Domain"
-+ 
-+-#: ../lib/af.c:150
-++#: ../lib/af.c:158
-+ msgid "DARPA Internet"
-+-msgstr "DARPA Internet"
-++msgstr "DARPA-Internet"
-+ 
-+-#: ../lib/af.c:153
-++#: ../lib/af.c:161
-+ msgid "IPv6"
-+ msgstr "IPv6"
-+ 
-+-#: ../lib/af.c:156 ../lib/hw.c:169
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr "AMPR AX.25"
-+ 
-+-#: ../lib/af.c:159 ../lib/hw.c:175
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr "AMPR NET/ROM"
-+ 
-+-#: ../lib/af.c:162
-++#: ../lib/af.c:170
-+ msgid "Novell IPX"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:165
-++#: ../lib/af.c:173
-+ msgid "Appletalk DDP"
-+ msgstr "Appletalk DDP"
-+ 
-+-#: ../lib/af.c:168 ../lib/hw.c:207
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr "Econet"
-+ 
-+-#: ../lib/af.c:171 ../lib/hw.c:172
-++#: ../lib/af.c:179
-++msgid "CCITT X.25"
-++msgstr ""
-++
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr "AMPR ROSE"
-+ 
-+-#: ../lib/af.c:174 ../lib/hw.c:160
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr "Ash"
-+ 
-+-#: ../lib/af.c:232
-++#: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr "Bitte nur eine Adressfamilie angeben.\n"
-+ 
-+-#: ../lib/af.c:293
-++#: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr "Zu viele Adressfamilien angegeben.\n"
-+ 
-+-#: ../lib/af.c:304
-++#: ../lib/af.c:315
-+ #, c-format
-+ msgid "Unknown address family `%s'.\n"
-+-msgstr "Unbekannte Adressfamilie `%s'.\n"
-+-
-+-#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
-+-#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
-+-#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
-+-#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
-+-msgid "[NONE SET]"
-+-msgstr "[NICHT GESETZT]"
-++msgstr "Unbekannte Adressfamilie »%s«.\n"
-+ 
-+-#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-++#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-+ #, c-format
-+ msgid "in_arcnet(%s): invalid arcnet address!\n"
-+ msgstr "in_arcnet(%s): Ungültige ARCnet-Adresse!\n"
-+ 
-+-#: ../lib/arcnet.c:108
-++#: ../lib/arcnet.c:97
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing : ignored!\n"
-+ msgstr "in_arcnet(%s): angehängt : ignoriert!\n"
-+ 
-+-#: ../lib/arcnet.c:120
-++#: ../lib/arcnet.c:109
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr "in_arcnet(%s): Nachfolgender Müll!\n"
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+-msgstr "Fehlerhafte Ash Adresse"
-++msgstr "Fehlerhafte Ash-Adresse"
-++
-++#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-++#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-++#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-++msgid "[NONE SET]"
-++msgstr "[NICHT GESETZT]"
-+ 
-+ #: ../lib/ax25.c:97 ../lib/netrom.c:100
-+ msgid "Invalid callsign"
-+@@ -1898,22 +2168,21 @@ msgid "Callsign too long"
-+ msgstr "Rufzeichen zu lang"
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr "AX.25 ist auf diesem System nicht konfiguriert.\n"
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr "Kernel AX.25 Routentabelle\n"
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr "Ziel         SStelle  Benutzer\n"
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr "DDP-Routentabelle wird noch nicht unterstützt.\n"
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1929,153 +2198,168 @@ msgstr "in_ether(%s): angehängt : ignori
-+ msgid "in_ether(%s): trailing junk!\n"
-+ msgstr "in_ether(%s): Nachfolgender Müll!\n"
-+ 
-+-#: ../lib/fddi.c:95 ../lib/fddi.c:110
-++#: ../lib/fddi.c:84 ../lib/fddi.c:99
-+ #, c-format
-+ msgid "in_fddi(%s): invalid fddi address!\n"
-+ msgstr "in_fddi(%s): Ungültige FDDI-Adresse!\n"
-+ 
-+-#: ../lib/fddi.c:122
-++#: ../lib/fddi.c:111
-+ #, c-format
-+ msgid "in_fddi(%s): trailing : ignored!\n"
-+ msgstr "in_fddi(%s): nachfolgend : ignoriert!\n"
-+ 
-+-#: ../lib/fddi.c:134
-++#: ../lib/fddi.c:123
-+ #, c-format
-+ msgid "in_fddi(%s): trailing junk!\n"
-+ msgstr "in_fddi(%s): Nachfolgender Müll!\n"
-+ 
-+-#: ../lib/getroute.c:97 ../lib/setroute.c:76
-++#: ../lib/getroute.c:101 ../lib/setroute.c:80
-+ #, c-format
-+ msgid "Address family `%s' not supported.\n"
-+ msgstr "Adressfamilie `%s' wird nicht unterstützt.\n"
-+ 
-+-#: ../lib/getroute.c:103 ../lib/setroute.c:80
-++#: ../lib/getroute.c:107 ../lib/setroute.c:84
-+ #, c-format
-+ msgid "No routing for address family `%s'.\n"
-+ msgstr "Kein Routen für Adressfamilie `%s'.\n"
-+ 
-+-#: ../lib/hippi.c:96 ../lib/hippi.c:111
-++#: ../lib/hippi.c:84 ../lib/hippi.c:99
-+ #, c-format
-+ msgid "in_hippi(%s): invalid hippi address!\n"
-+ msgstr "in_hippi(%s): Ungültige HIPPI-Adresse!\n"
-+ 
-+-#: ../lib/hippi.c:123
-++#: ../lib/hippi.c:111
-+ #, c-format
-+ msgid "in_hippi(%s): trailing : ignored!\n"
-+ msgstr "in_hippi(%s): nachfolgend : ignoriert!\n"
-+ 
-+-#: ../lib/hippi.c:134
-++#: ../lib/hippi.c:122
-+ #, c-format
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr "in_hippi(%s): Nachfolgender Müll!\n"
-+ 
-+-#: ../lib/hw.c:147
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr "Lokale Schleife"
-+ 
-+-#: ../lib/hw.c:150
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr "Serielle IP"
-+ 
-+-#: ../lib/hw.c:151
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr "Serielle VJ-IP"
-+ 
-+-#: ../lib/hw.c:152
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr "6-bit Serielle IP"
-+ 
-+-#: ../lib/hw.c:153
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr "VJ 6-bit Serielle IP"
-+ 
-+-#: ../lib/hw.c:154
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr "Adaptive Serielle IP"
-+ 
-+-#: ../lib/hw.c:157
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr "Ethernet"
-+ 
-+-#: ../lib/hw.c:163
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr "Fiber Distributed Data Interface"
-+ 
-+-#: ../lib/hw.c:166
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr "HIPPI"
-+ 
-+-#: ../lib/hw.c:178
-++#: ../lib/hw.c:191
-++msgid "generic X.25"
-++msgstr ""
-++
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr "IPIP Tunnel"
-+ 
-+-#: ../lib/hw.c:181
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+-msgstr "Punkt-zu-Punkt Verbindung"
-++msgstr "Punkt-zu-Punkt-Verbindung"
-+ 
-+-#: ../lib/hw.c:184
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr "(Cisco)-HDLC"
-+ 
-+-#: ../lib/hw.c:185
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:188
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr "ARCnet"
-+ 
-+-#: ../lib/hw.c:191
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr "Frame Relay DLCI"
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr "Frame Relay Access Device"
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr "IPv6-nach-IPv4"
-+ 
-+-#: ../lib/hw.c:198
-+-#, fuzzy
-++#: ../lib/hw.c:214
-+ msgid "IrLAP"
-+-msgstr "LAPB"
-++msgstr "IrLAP"
-+ 
-+-#: ../lib/hw.c:201
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:219
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr ""
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+ msgstr "rresolve: nicht unterstützte Adressfamilie %d !\n"
-+ 
-+-#: ../lib/inet6_gr.c:79
-++#: ../lib/inet6.c:131
-++#, fuzzy
-++msgid "[UNKNOWN]"
-++msgstr "UNBEKANNT"
-++
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr "INET6 (IPv6) ist auf diesem System nicht konfiguriert.\n"
-+ 
-+-#: ../lib/inet6_gr.c:82
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+-msgstr "Kernel IPv6 Routentabelle\n"
-++msgstr "Kernel-IPv6-Routentabelle\n"
-+ 
-+-#: ../lib/inet6_gr.c:84
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-+-msgstr ""
-+-"Ziel                                        Nächster Hop                     "
-+-"            Flags Metric Ref    Benutzer Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-++msgstr "Ziel                                        Nächster Hop                                 Flags Metric Ref    Benutzer Iface\n"
-+ 
-+-#: ../lib/inet6_gr.c:158
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr "Kernel IPv6 Nachbarcache\n"
-+ 
-+-#: ../lib/inet6_gr.c:161
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+@@ -2083,39 +2367,45 @@ msgstr ""
-+ "Nachbar                                     HW-Adresse        Iface    Flags "
-+ "Ref Zustand\n"
-+ 
-+-#: ../lib/inet6_gr.c:165
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+-msgstr ""
-+-"Nachbar                                     HW-Adresse        Iface    Flags "
-+-"Ref Zustand          Stale(sec) Löschen(sec)\n"
-++msgstr "Nachbar                                     HW-Adresse        Iface    Flags Ref Zustand          Stale(sec) Löschen(sec)\n"
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr "Benutzung: inet6_route [-vF] del Ziel\n"
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr "       inet6_route [-vF] add Ziel [gw Gateway] [metric M] [[dev] If]\n"
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet6_route [-FC] flush      NICHT unterstützt\n"
-+ 
-+-#: ../lib/inet6_sr.c:182
-++#: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+-msgstr ",,Flush'' für IPv6 Routentabelle nicht unterstützt\n"
-++msgstr "»Flush« für IPv6-Routentabelle nicht unterstützt\n"
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr "INET (IPv4) ist auf diesem System nicht konfiguriert.\n"
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+-msgstr "Kernel IP Routentabelle\n"
-++msgstr "Kernel-IP-Routentabelle\n"
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2124,6 +2414,7 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2132,6 +2423,7 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+@@ -2140,10 +2432,12 @@ msgstr ""
-+ "Iface    MSS   Fenster irtt\n"
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+-msgstr "Kernel IP Routencache\n"
-++msgstr "Kernel-IP-Routencache\n"
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2152,6 +2446,7 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+@@ -2160,6 +2455,7 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+@@ -2168,6 +2464,7 @@ msgstr ""
-+ "Iface    MSS   Fenster irtt   HH  Arp\n"
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+@@ -2175,37 +2472,39 @@ msgstr ""
-+ "Quelle          Ziel            Gateway         Flags Metrik Ref    Ben "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+-msgstr ""
-+-"Benutzung: inet_route [-vF] del {-host|-net} Ziel[/prefix] [gw Gw] [metric "
-+-"M] [[dev] If]\n"
-++msgstr "Benutzung: inet_route [-vF] del {-host|-net} Ziel[/Präfix] [gw Gw] [metric M] [[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+-msgstr ""
-+-"       inet_route [-vF] add {-host|-net} Ziel[/Prefix] [gw Gw] [metric M]\n"
-++msgstr "       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [gw Gw] [metric M]\n"
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+-msgstr ""
-+-"       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [metric M] reject\n"
-++msgstr "       inet_route [-vF] add {-host|-net} Ziel[/Präfix] [metric M] reject\n"
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet_route [-FC] flush      NICHT unterstützt\n"
-+ 
-+@@ -2215,15 +2514,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr "route: %s: Netzadresse als Gateway ungültig!\n"
-+ 
-+ #: ../lib/inet_sr.c:174
-+-#, fuzzy
-++#, fuzzy, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr "route: Ungültige MSS.\n"
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr "route: Ungültige Fenstergröße.\n"
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr "route: Ungültige Start-RTT.\n"
-+ 
-+@@ -2238,126 +2539,408 @@ msgid "route: bogus netmask %s\n"
-+ msgstr "Route: Fehlerhafte Netzmaske %s\n"
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr "route: Netzmaske passt nicht zur Routenadresse\n"
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+-msgstr ",,Flush'' der Inet-Routentabelle nicht unterstützt\n"
-++msgstr "»Flush« der Inet-Routentabelle nicht unterstützt\n"
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+-msgstr "Änderung des ,,Inet'' Routencaches nicht unterstützt\n"
-++msgstr "Änderung des »Inet« Routencaches nicht unterstützt\n"
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr "IPX ist auf diesem System nicht konfiguriert.\n"
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+-msgstr "Kernel IPX Routentabelle\n"
-++msgstr "Kernel-IPX-Routentabelle\n"
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+-msgstr "Ziel                      Router Netz               Router Knoten\n"
-++msgstr "Ziel                      Router-Netz               Router-Knoten\n"
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+-msgstr "IPX: dies muß noch geschrieben werden\n"
-++msgstr "IPX: dies muss noch geschrieben werden\n"
-+ 
-+-#: ../lib/masq_info.c:197
-++#: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr "IP-Maskierungseinträge\n"
-+ 
-+-#: ../lib/masq_info.c:200
-++#: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr "Prot   expire Quelle               Ziel                 Ports\n"
-+ 
-+-#: ../lib/masq_info.c:203
-++#: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+-"Prot   Ablauf    Anf-Seq Delta Prevd Quelle               Ziel               "
-+-"  Ports\n"
-++"Prot   Ablauf    Anf-Seq Delta Prevd Quelle               "
-++"Ziel                 Ports\n"
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr "NET/ROM ist auf diesem System nicht verfügbar.\n"
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+-msgstr "Kernel NET/ROM Routentabelle\n"
-++msgstr "Kernel-NET/ROM-Routentabelle\n"
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr "Ziel         Mnemonic  Qualität  Nachbar  Iface\n"
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+-msgstr "NET/ROM Benutzung\n"
-++msgstr "NET/ROM-Benutzung\n"
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+-msgstr "NET/ROM: Dies muß noch geschrieben werden\n"
-++msgstr "NET/ROM: Dies muss noch geschrieben werden\n"
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr "Mit diesem Programm kann PPP nicht gestartet werden.\n"
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+-msgstr "Bitte benutzen sie pppd.\n"
-++msgstr "Bitte benutzen Sie pppd.\n"
-+ 
-+ #: ../lib/rose.c:87
-+ msgid "Node address must be ten digits"
-+-msgstr "Knotenadresse muß zehn Ziffern haben"
-++msgstr "Knotenadresse muss zehn Ziffern haben"
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr "ROSE ist auf diesem System nicht verfügbar.\n"
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+-msgstr "ROSE Kernel Routentabelle\n"
-++msgstr "ROSE-Kernel-Routentabelle\n"
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr "in_tr(%s): ungültige Tokenringadresse!\n"
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr "in_tr(%s): nachfolgend : ignoriert!\n"
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr "in_tr(%s): nachfolgender Müll!\n"
-+ 
-+-#: ../lib/interface.c:124
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+-msgstr "Warnung: Keine INET Sockets verfügbar: %s\n"
-++msgstr "Warnung: Keine INET-Sockets verfügbar: %s\n"
-+ 
-+-#: ../lib/interface.c:270
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr ""
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:504
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr "Gerät nicht gefunden"
-+ 
-+-#: ../lib/interface.c:508
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-+ msgstr "%s: Fehler beim Auslesen der Schnittstelleninformation: %s\n"
-+ 
-+-#: ../lib/sockets.c:59
-++#: ../lib/interface.c:608
-++msgid "     - no statistics available -"
-++msgstr "     - keine Statistiken verfügbar -"
-++
-++#: ../lib/interface.c:612
-++#, c-format
-++msgid "[NO FLAGS]"
-++msgstr "[KEINE FLAGS]"
-++
-++#: ../lib/interface.c:688
-++#, c-format
-++msgid "%-9.9s Link encap:%s  "
-++msgstr "%-9.9s Protokoll:%s  "
-++
-++#: ../lib/interface.c:693
-++#, c-format
-++msgid "HWaddr %s  "
-++msgstr "Hardware Adresse %s  "
-++
-++#: ../lib/interface.c:696
-++#, c-format
-++msgid "Media:%s"
-++msgstr "Medium:%s"
-++
-++#: ../lib/interface.c:698
-++#, c-format
-++msgid "(auto)"
-++msgstr "(auto)"
-++
-++#: ../lib/interface.c:705
-++#, c-format
-++msgid "          %s addr:%s "
-++msgstr "          %s Adresse:%s "
-++
-++#: ../lib/interface.c:708
-++#, c-format
-++msgid " P-t-P:%s "
-++msgstr " P-z-P:%s "
-++
-++#: ../lib/interface.c:711
-++#, c-format
-++msgid " Bcast:%s "
-++msgstr " Bcast:%s "
-++
-++#: ../lib/interface.c:713
-++#, c-format
-++msgid " Mask:%s\n"
-++msgstr " Maske:%s\n"
-++
-++#: ../lib/interface.c:730
-++#, c-format
-++msgid "          inet6 addr: %s/%d"
-++msgstr "          inet6-Adresse: %s/%d"
-++
-++#: ../lib/interface.c:732
-++#, c-format
-++msgid " Scope:"
-++msgstr " Gültigkeitsbereich:"
-++
-++#: ../lib/interface.c:735
-++#, c-format
-++msgid "Global"
-++msgstr "Global"
-++
-++#: ../lib/interface.c:738
-++#, c-format
-++msgid "Link"
-++msgstr "Verbindung"
-++
-++#: ../lib/interface.c:741
-++#, c-format
-++msgid "Site"
-++msgstr "Standort"
-++
-++#: ../lib/interface.c:744
-++#, c-format
-++msgid "Compat"
-++msgstr "Kompatibilität"
-++
-++#: ../lib/interface.c:747
-++#, c-format
-++msgid "Host"
-++msgstr "Maschine"
-++
-++#: ../lib/interface.c:750
-++#, c-format
-++msgid "Unknown"
-++msgstr "Unbekannt"
-++
-++#: ../lib/interface.c:765
-++#, c-format
-++msgid "          IPX/Ethernet II addr:%s\n"
-++msgstr "          IPX/Ethernet II Adresse:%s\n"
-++
-++#: ../lib/interface.c:768
-++#, c-format
-++msgid "          IPX/Ethernet SNAP addr:%s\n"
-++msgstr "          IPX/Ethernet SNAP Adresse:%s\n"
-++
-++#: ../lib/interface.c:771
-++#, c-format
-++msgid "          IPX/Ethernet 802.2 addr:%s\n"
-++msgstr "          IPX/Ethernet 802.2 Adresse:%s\n"
-++
-++#: ../lib/interface.c:774
-++#, c-format
-++msgid "          IPX/Ethernet 802.3 addr:%s\n"
-++msgstr "          IPX/Ethernet 802.3 Adresse:%s\n"
-++
-++#: ../lib/interface.c:784
-++#, c-format
-++msgid "          EtherTalk Phase 2 addr:%s\n"
-++msgstr "          EtherTalk Phase 2 Adresse:%s\n"
-++
-++#: ../lib/interface.c:793
-++#, c-format
-++msgid "          econet addr:%s\n"
-++msgstr "          econet Adresse:%s\n"
-++
-++#: ../lib/interface.c:800
-++#, c-format
-++msgid "[NO FLAGS] "
-++msgstr "[KEINE FLAGS] "
-++
-++#: ../lib/interface.c:802
-++#, c-format
-++msgid "UP "
-++msgstr "UP "
-++
-++#: ../lib/interface.c:804
-++#, c-format
-++msgid "BROADCAST "
-++msgstr "BROADCAST "
-++
-++#: ../lib/interface.c:806
-++#, c-format
-++msgid "DEBUG "
-++msgstr "DEBUG "
-++
-++#: ../lib/interface.c:808
-++#, c-format
-++msgid "LOOPBACK "
-++msgstr "LOOPBACK "
-++
-++#: ../lib/interface.c:810
-++#, c-format
-++msgid "POINTOPOINT "
-++msgstr "PUNKTZUPUNKT "
-++
-++#: ../lib/interface.c:812
-++#, c-format
-++msgid "NOTRAILERS "
-++msgstr "NOTRAILERS "
-++
-++#: ../lib/interface.c:814
-++#, c-format
-++msgid "RUNNING "
-++msgstr "RUNNING "
-++
-++#: ../lib/interface.c:816
-++#, c-format
-++msgid "NOARP "
-++msgstr "NOARP "
-++
-++#: ../lib/interface.c:818
-++#, c-format
-++msgid "PROMISC "
-++msgstr "PROMISC "
-++
-++#: ../lib/interface.c:820
-++#, c-format
-++msgid "ALLMULTI "
-++msgstr "ALLMULTI "
-++
-++#: ../lib/interface.c:822
-++#, c-format
-++msgid "SLAVE "
-++msgstr "SLAVE "
-++
-++#: ../lib/interface.c:824
-++#, c-format
-++msgid "MASTER "
-++msgstr "MASTER "
-++
-++#: ../lib/interface.c:826
-++#, c-format
-++msgid "MULTICAST "
-++msgstr "MULTICAST "
-++
-++#: ../lib/interface.c:829
-++#, c-format
-++msgid "DYNAMIC "
-++msgstr "DYNAMIC "
-++
-++#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-++#: ../lib/interface.c:832
-++#, c-format
-++msgid " MTU:%d  Metric:%d"
-++msgstr " MTU:%d  Metrik:%d"
-++
-++#: ../lib/interface.c:836
-++#, c-format
-++msgid "  Outfill:%d  Keepalive:%d"
-++msgstr "  Outfill:%d  Keepalive:%d"
-++
-++#: ../lib/interface.c:850
-++#, fuzzy, c-format
-++msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgstr "Empfangene Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Rahmen:%lu\n"
-++
-++#: ../lib/interface.c:855
-++#, c-format
-++msgid "             compressed:%lu\n"
-++msgstr "             komprimiert:%lu\n"
-++
-++#: ../lib/interface.c:895
-++#, fuzzy, c-format
-++msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgstr "Verschickte Pakete:%lu Fehler:%lu Weggeworfen:%lu Überlauf:%lu Träger:%lu\n"
-++
-++#: ../lib/interface.c:899
-++#, c-format
-++msgid "          collisions:%lu "
-++msgstr "          Kollisionen:%lu "
-++
-++#: ../lib/interface.c:901
-++#, c-format
-++msgid "compressed:%lu "
-++msgstr "Komprimiert:%lu "
-++
-++#: ../lib/interface.c:903
-++#, c-format
-++msgid "txqueuelen:%d "
-++msgstr "Sendewarteschlangenlänge:%d "
-++
-++#: ../lib/interface.c:905
-++#, c-format
-++msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-++msgstr ""
-++
-++#: ../lib/interface.c:916
-++#, c-format
-++msgid "Interrupt:%d "
-++msgstr "Interrupt:%d "
-++
-++#. Only print devices using it for
-++#. I/O maps
-++#: ../lib/interface.c:919
-++#, c-format
-++msgid "Base address:0x%x "
-++msgstr "Basisadresse:0x%x "
-++
-++#: ../lib/interface.c:921
-++#, c-format
-++msgid "Memory:%lx-%lx "
-++msgstr "Speicher:%lx-%lx "
-++
-++#: ../lib/interface.c:924
-++#, c-format
-++msgid "DMA chan:%x "
-++msgstr "DMA Kanal:%x "
-++
-++#: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr "Keine benutzbaren Adressfamilien gefunden.\n"
-+ 
-+@@ -2369,41 +2952,44 @@ msgstr "ip: %s ist eine ungültige INET-A
-+ #: ../lib/util-ank.c:238
-+ #, c-format
-+ msgid "ip: %s is invalid inet prefix\n"
-+-msgstr "ip: %s ist ein ungültiges INET-Prefix\n"
-++msgstr "ip: %s ist ein ungültiges INET-Präfix\n"
-+ 
-+ #: ../lib/util-ank.c:248
-+ #, c-format
-+ msgid "ip: %s is invalid IPv4 address\n"
-+-msgstr "ip: %s ist eine ungültige IPv4 Adresse\n"
-++msgstr "ip: %s ist eine ungültige IPv4-Adresse\n"
-+ 
-+ #: ../lib/util-ank.c:256
-+ #, c-format
-+ msgid "ip: argument is wrong: %s\n"
-+ msgstr "ip: Fehlerhaftes Argument: %s\n"
-+ 
-+-#: ../ipmaddr.c:56
-++#: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr "Benutzung: ipmaddr [ add | del ] MULTIADR dev NAME\n"
-+ 
-+-#: ../ipmaddr.c:57
-++#: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr "       ipmaddr show [ dev NAME ] [ ipv4 | ipv6 | link | all ]\n"
-+ 
-+-#: ../ipmaddr.c:58
-++#: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr ""
-+ 
-+-#: ../ipmaddr.c:258
-++#: ../ipmaddr.c:263
-+ #, c-format
-+ msgid "family %d "
-+ msgstr "familie %d "
-+ 
-+-#: ../ipmaddr.c:267
-++#: ../ipmaddr.c:272
-+ #, c-format
-+ msgid " users %d"
-+ msgstr " Benutzer %d"
-+ 
-+-#: ../ipmaddr.c:353
-++#: ../ipmaddr.c:358
-+ msgid "Cannot create socket"
-+ msgstr "Kann Socket nicht öffnen"
-+ 
-+@@ -2418,13 +3004,14 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr "slattach: tty_lock: (%s): %s\n"
-+ 
-+ #: ../slattach.c:192
-++#, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr "slattach: Kann PID-Datei nicht schreiben\n"
-+ 
-+ #: ../slattach.c:202
-+ #, c-format
-+ msgid "slattach: tty_lock: UUCP user %s unknown!\n"
-+-msgstr "slattach: tty_lock: UUCP Benutzer %s unbekannt!\n"
-++msgstr "slattach: tty_lock: UUCP-Benutzer %s unbekannt!\n"
-+ 
-+ #: ../slattach.c:430
-+ #, c-format
-+@@ -2436,39 +3023,71 @@ msgstr "slattach: tty_hangup(DROP): %s\n
-+ msgid "slattach: tty_hangup(RAISE): %s\n"
-+ msgstr "slattach: tty_hangup(RAISE): %s\n"
-+ 
-+-#: ../slattach.c:486
-++#: ../slattach.c:468
-++#, fuzzy, c-format
-++msgid "slattach: tty name too long\n"
-++msgstr "%s: name zu lang\n"
-++
-++#: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr "slattach: tty_open: kann aktuellen Zustand nicht auslesen!\n"
-+ 
-+-#: ../slattach.c:493
-++#: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+ msgstr ""
-+ "slattach: tty_open: Kann augenblicklichen Leitungszustand nicht auslesen!\n"
-+ 
-+-#: ../slattach.c:501
-++#: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr "slattach: tty_open: Kann RAW-Modus nicht setzen!\n"
-+ 
-+-#: ../slattach.c:508
-++#: ../slattach.c:520
-+ #, c-format
-+ msgid "slattach: tty_open: cannot set %s bps!\n"
-+ msgstr "slattach: tty_open: Kann %s bps nicht setzen!\n"
-+ 
-+-#: ../slattach.c:518
-++#: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr "slattach: tty_open: Kann 8N1-Modus nicht setzen!\n"
-+ 
-+-#: ../slattach.c:686
-++#: ../slattach.c:672
-++#, c-format
-++msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++msgstr ""
-++
-++#: ../slattach.c:704
-+ #, c-format
-+ msgid "%s started"
-+ msgstr "%s gestartet"
-+ 
-+-#: ../slattach.c:687
-++#: ../slattach.c:705
-+ #, c-format
-+ msgid " on %s"
-+ msgstr " auf %s"
-+ 
-+-#: ../slattach.c:688
-++#: ../slattach.c:706
-+ #, c-format
-+ msgid " interface %s\n"
-+ msgstr " Schnittstelle: %s\n"
-++
-++msgid ""
-++"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-++"<-''-\n"
-++msgstr ""
-++"  arp [-v]   [<HW>] [-i <if>] -s  <Hostname> <hwaddr> [netmask <nm>] pub\n"
-++
-++msgid "%s: unknown interface: %s\n"
-++msgstr "%s: unbekannte Schnittstelle: %s\n"
-++
-++msgid "address mask replies"
-++msgstr "Adressmaskenantworten"
-++
-++msgid "unknown title %s\n"
-++msgstr "Unbekannter Titel %s\n"
-++
-++msgid "Routing table for `ddp' not yet supported.\n"
-++msgstr "DDP-Routentabelle wird noch nicht unterstützt.\n"
-+Index: net-tools/po/ja.po
-+===================================================================
-+--- /dev/null
-++++ net-tools/po/ja.po
-+@@ -0,0 +1,3133 @@
-++# Net-tool Japanese locale data
-++# Kenshi Muto <kmuto@debian.org>, 2007.
-++# Yasuyuki Furukawa <yasu@on.cs.keio.ac.jp>, 1999.
-++#
-++msgid ""
-++msgstr ""
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-++"PO-Revision-Date: 2007-07-04 20:47+0900\n"
-++"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
-++"Language-Team: Japanese\n"
-++"MIME-Version: 1.0\n"
-++"Content-Type: text/plain; charset=UTF-8\n"
-++"Content-Transfer-Encoding: 8-bit\n"
-++
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-++msgid "arp: need host name\n"
-++msgstr "arp: ホスト��必���\n"
-++
-++#: ../arp.c:215 ../arp.c:230
-++#, c-format
-++msgid "No ARP entry for %s\n"
-++msgstr "%s�ARPエントリ��り��ん\n"
-++
-++#: ../arp.c:248
-++#, c-format
-++msgid "arp: cant get HW-Address for `%s': %s.\n"
-++msgstr "arp: '%s'��ードウェアアドレスを�得����ん: %s.\n"
-++
-++#: ../arp.c:252
-++#, c-format
-++msgid "arp: protocol type mismatch.\n"
-++msgstr "arp: プロトコルタイプ������ん.\n"
-++
-++#: ../arp.c:261
-++#, c-format
-++msgid "arp: device `%s' has HW address %s `%s'.\n"
-++msgstr "arp: デ�イス`%s'��ードウェアアドレス%s `%s'��.\n"
-++
-++#: ../arp.c:293
-++#, c-format
-++msgid "arp: need hardware address\n"
-++msgstr "arp: �ードウェアアドレス�必���\n"
-++
-++#: ../arp.c:301
-++#, c-format
-++msgid "arp: invalid hardware address\n"
-++msgstr "arp: �ードウェアアドレス���当��\n"
-++
-++#: ../arp.c:398
-++#, c-format
-++msgid "arp: cannot open etherfile %s !\n"
-++msgstr "arp: etherファイル%s�開���ん!\n"
-++
-++#: ../arp.c:414
-++#, c-format
-++msgid "arp: format error on line %u of etherfile %s !\n"
-++msgstr "arp: %u行(ファイル%s)�フォーマットエラー��り��!\n"
-++
-++#: ../arp.c:427
-++#, c-format
-++msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-++msgstr "arp: etherファイル%u行(%s)�エントリを設定����ん!\n"
-++
-++#: ../arp.c:448
-++#, c-format
-++msgid ""
-++"Address                  HWtype  HWaddress           Flags Mask            "
-++"Iface\n"
-++msgstr "アドレス               HWタイプ  HWアドレス         フラグ マスク インタフェース\n"
-++
-++#: ../arp.c:476
-++msgid "<from_interface>"
-++msgstr "<起点インタフェース>"
-++
-++#: ../arp.c:478
-++msgid "(incomplete)"
-++msgstr "(�完全)"
-++
-++# translatable?
-++#: ../arp.c:495
-++#, c-format
-++msgid "%s (%s) at "
-++msgstr "%s (%s) at "
-++
-++#: ../arp.c:501
-++#, c-format
-++msgid "<incomplete> "
-++msgstr "<�完全> "
-++
-++#: ../arp.c:507
-++#, c-format
-++msgid "netmask %s "
-++msgstr "�ットマスク %s "
-++
-++# translatable?
-++#: ../arp.c:524
-++#, c-format
-++msgid "on %s\n"
-++msgstr "on %s\n"
-++
-++#: ../arp.c:605
-++#, c-format
-++msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-++msgstr "エントリ: %d\tスキップ: %d\t発見: %d\n"
-++
-++#: ../arp.c:609
-++#, c-format
-++msgid "%s (%s) -- no entry\n"
-++msgstr "%s (%s) -- エントリ��\n"
-++
-++#: ../arp.c:611
-++#, c-format
-++msgid "arp: in %d entries no match found.\n"
-++msgstr "arp: %d�エントリ中, 一致�るも��見��り��ん.\n"
-++
-++#: ../arp.c:626
-++#, c-format
-++msgid ""
-++"Usage:\n"
-++"  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-++"cache\n"
-++msgstr ""
-++"使用法:\n"
-++"  arp [-vn]  [<HW>] [-i <インタフェース>]\n"
-++"                                [-a] [<ホスト�>]   ‥‥ ARPキャッシュ�表"
-++"示\n"
-++
-++#: ../arp.c:627
-++#, c-format
-++msgid ""
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-++"entry\n"
-++msgstr "  arp [-v]    [-i <インタフェース>]  -d  <ホスト�> [pub] ‥‥ARPエントリを削除\n"
-++
-++#: ../arp.c:628
-++#, c-format
-++msgid ""
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-++"file\n"
-++msgstr ""
-++"  arp [-vnD] [<HW>] [-i <インタフェース>] \n"
-++"                              -f  <ファイル�>  ‥‥ファイル�らエントリを追加\n"
-++
-++#: ../arp.c:629
-++#, c-format
-++msgid ""
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-++"entry\n"
-++msgstr ""
-++"  arp [-v]   [<HW>] [-i <インタフェース>]\n"
-++"             -s <ホスト�> <�ードウェアアドレス> [temp] ‥‥エントリを追加\n"
-++
-++# FIXME:What does '' mean?
-++#: ../arp.c:630
-++#, c-format
-++msgid ""
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-++"<-''-\n"
-++"\n"
-++msgstr ""
-++"  arp [-v]   [<HW>] [-i <インタフェース>] -Ds <ホスト�>\n"
-++"              <インタフェース> [netmask <�ットマスク>] pub     ‥‥     〃\n"
-++
-++#: ../arp.c:632
-++#, c-format
-++msgid ""
-++"        -a                       display (all) hosts in alternative (BSD) "
-++"style\n"
-++msgstr ""
-++"        -a                 新��(BSD)スタイル�エントリ�れ�全ホストを表示"
-++"�る\n"
-++
-++#: ../arp.c:633
-++#, c-format
-++msgid "        -s, --set                set a new ARP entry\n"
-++msgstr "        -s, --set          新�ARPエントリを設定�る\n"
-++
-++#: ../arp.c:634
-++#, c-format
-++msgid "        -d, --delete             delete a specified entry\n"
-++msgstr "        -d, --delete       指定エントリを削除�る\n"
-++
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-++msgid "        -v, --verbose            be verbose\n"
-++msgstr "        -v, --verbose            詳細表示を行��\n"
-++
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, c-format
-++msgid "        -n, --numeric            don't resolve names\n"
-++msgstr "        -n, --numeric            ���レゾルブを���\n"
-++
-++#: ../arp.c:637
-++#, c-format
-++msgid ""
-++"        -i, --device             specify network interface (e.g. eth0)\n"
-++msgstr "        -i, --device       �ットワークインタフェース�指定(例 eth0)\n"
-++
-++#: ../arp.c:638
-++#, c-format
-++msgid "        -D, --use-device         read <hwaddr> from given device\n"
-++msgstr ""
-++"        -D, --use-device   与�られ�デ�イス�ら\n"
-++"                                    <HWアドレス>を読�込む\n"
-++
-++#: ../arp.c:639
-++#, c-format
-++msgid "        -A, -p, --protocol       specify protocol family\n"
-++msgstr "        -A, -p, --protocol       プロトコルファミリを指定�る\n"
-++
-++#: ../arp.c:640
-++#, c-format
-++msgid ""
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-++"\n"
-++msgstr "        -f, --file         /etc/ethersファイル�ら新�エントリを読�込む\n\n"
-++
-++#: ../arp.c:642 ../rarp.c:182
-++#, c-format
-++msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-++msgstr "  <HW>=�ードウェアアドレスタイプを指定�る��'-H <hw>'を使��下��。標準: %s\n"
-++
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-++msgid "  List of possible hardware types (which support ARP):\n"
-++msgstr "  (ARPをサ�ート��)指定�能��ードウェアタイプ�リスト:\n"
-++
-++#: ../arp.c:677 ../arp.c:762
-++#, c-format
-++msgid "%s: hardware type not supported!\n"
-++msgstr "%s: �ードウェアタイプ�サ�ート�れ����ん!\n"
-++
-++#: ../arp.c:681
-++#, c-format
-++msgid "%s: address family not supported!\n"
-++msgstr "%s: アドレスファミリ�サ�ート�れ����ん!\n"
-++
-++#: ../arp.c:716
-++#, c-format
-++msgid "arp: -N not yet supported.\n"
-++msgstr "arp: -N���サ�ート�����ん.\n"
-++
-++#: ../arp.c:726
-++#, c-format
-++msgid "arp: %s: unknown address family.\n"
-++msgstr "arp: %s: �明�アドレスファミリ��.\n"
-++
-++#: ../arp.c:735
-++#, c-format
-++msgid "arp: %s: unknown hardware type.\n"
-++msgstr "arp: %s: �明��ードウェアタイプ��.\n"
-++
-++#: ../arp.c:754
-++#, c-format
-++msgid "arp: %s: kernel only supports 'inet'.\n"
-++msgstr "arp: %s: カー�ル�'inet'以外�サ�ート�����ん.\n"
-++
-++#: ../arp.c:767
-++#, c-format
-++msgid "arp: %s: hardware type without ARP support.\n"
-++msgstr "arp: %s: ARPサ�ート����ードウェアタイプ��.\n"
-++
-++#: ../hostname.c:71
-++#, c-format
-++msgid "Setting nodename to `%s'\n"
-++msgstr "ノード�を`%s'�設定����\n"
-++
-++#: ../hostname.c:76
-++#, c-format
-++msgid "%s: you must be root to change the node name\n"
-++msgstr "%s: ノード��変更�ルート���れ��り��ん\n"
-++
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-++#, c-format
-++msgid "%s: name too long\n"
-++msgstr "%s: ���長����\n"
-++
-++#: ../hostname.c:91
-++#, c-format
-++msgid "Setting hostname to `%s'\n"
-++msgstr "ホスト�を`%s'�設定����\n"
-++
-++#: ../hostname.c:96
-++#, c-format
-++msgid "%s: you must be root to change the host name\n"
-++msgstr "%s: ホスト��変更�ルート���れ��り��ん\n"
-++
-++#: ../hostname.c:109
-++#, c-format
-++msgid "Setting domainname to `%s'\n"
-++msgstr "ドメインを`%s'�設定����\n"
-++
-++#: ../hostname.c:114
-++#, c-format
-++msgid "%s: you must be root to change the domain name\n"
-++msgstr "%s: ドメイン��変更�ルート���れ��り��ん\n"
-++
-++#: ../hostname.c:131
-++#, c-format
-++msgid "Resolving `%s' ...\n"
-++msgstr "`%s'をレゾルブ中 ...\n"
-++
-++#: ../hostname.c:137
-++#, c-format
-++msgid "Result: h_name=`%s'\n"
-++msgstr "�果: h_name=`%s'\n"
-++
-++#: ../hostname.c:142
-++#, c-format
-++msgid "Result: h_aliases=`%s'\n"
-++msgstr "�果: h_aliases=`%s'\n"
-++
-++#: ../hostname.c:147
-++#, c-format
-++msgid "Result: h_addr_list=`%s'\n"
-++msgstr "�果: h_addr_list=`%s'\n"
-++
-++#: ../hostname.c:208
-++#, c-format
-++msgid "%s: can't open `%s'\n"
-++msgstr "%s: `%s'を開���ん\n"
-++
-++#: ../hostname.c:222
-++#, c-format
-++msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-++msgstr "使用法: hostname   [-v] {ホスト�|-F ファイル}    (ファイル�よる)ホスト��設定\n"
-++
-++#: ../hostname.c:223
-++#, c-format
-++msgid ""
-++"       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-++msgstr "        domainname [-v] {NISドメイン|-F ファイル} (ファイル�よる)NISドメイン��設定\n"
-++
-++#: ../hostname.c:225
-++#, c-format
-++msgid ""
-++"       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-++"file)\n"
-++msgstr ""
-++"nodename [-v] {ノード�|-F ファイル}  (ファイル�よる)DECnetノード��設定\n"
-++
-++#: ../hostname.c:227
-++#, c-format
-++msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-++msgstr "        hostname [-v] [-d|-f|-s|-a|-i|-y]     形�を指定��表示\n"
-++
-++#: ../hostname.c:228
-++#, c-format
-++msgid ""
-++"       hostname [-v]                         display hostname\n"
-++"\n"
-++msgstr ""
-++"        hostname [-v]                         ホスト��出力\n"
-++"\n"
-++
-++#: ../hostname.c:229
-++#, c-format
-++msgid ""
-++"       hostname -V|--version|-h|--help       print info and exit\n"
-++"\n"
-++msgstr ""
-++"        hostname -V|--version|-h|--help       諸情報を出力��終了\n"
-++"\n"
-++"\n"
-++
-++#: ../hostname.c:230
-++#, c-format
-++msgid ""
-++"    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-++"\n"
-++msgstr "    dnsdomainname=ホスト� -d, {yp,nis,}domainname=ホスト� -y\n\n"
-++
-++#: ../hostname.c:231
-++#, c-format
-++msgid "    -s, --short           short host name\n"
-++msgstr "    -s, --short           短縮ホスト�\n"
-++
-++#: ../hostname.c:232
-++#, c-format
-++msgid "    -a, --alias           alias names\n"
-++msgstr "    -a, --alias           エイリアス�\n"
-++
-++#: ../hostname.c:233
-++#, c-format
-++msgid "    -i, --ip-address      addresses for the hostname\n"
-++msgstr "    -i, --ip-address      ホスト��対�るアドレス\n"
-++
-++#: ../hostname.c:234
-++#, c-format
-++msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-++msgstr "    -f, --fqdn, --long    ロングホスト�(FQDN)\n"
-++
-++#: ../hostname.c:235
-++#, c-format
-++msgid "    -d, --domain          DNS domain name\n"
-++msgstr "    -d, --domain          DNSドメイン�\n"
-++
-++#: ../hostname.c:236
-++#, c-format
-++msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-++msgstr "    -y, --yp, --nis       NIS/YPドメイン�\n"
-++
-++#: ../hostname.c:238
-++#, c-format
-++msgid "    -n, --node            DECnet node name\n"
-++msgstr "    -n, --node            DECnetノード�\n"
-++
-++#: ../hostname.c:240
-++#, c-format
-++msgid ""
-++"    -F, --file            read hostname or NIS domainname from given file\n"
-++"\n"
-++msgstr "    -F, --file            指定�ファイル�らホスト��NISドメイン�を読�込む\n\n"
-++
-++#: ../hostname.c:242
-++#, c-format
-++msgid ""
-++"   This command can read or set the hostname or the NIS domainname. You can\n"
-++"   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-++"   Unless you are using bind or NIS for host lookups you can change the\n"
-++"   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
-++"   part of the FQDN) in the /etc/hosts file.\n"
-++msgstr ""
-++"   ��コマンド���ホスト����NISドメイン�を読�込����設定����。\n"
-++"   DNSドメイン���FDN(完全修飾ドメイン�)を読�込む��も����。\n"
-++"   ホスト���照�Bind�よ�, NISも使���場�, /etc/hostsファイル��る\n"
-++"   FQDNや, (FQDN�一部分�)ドメイン�を変更����.\n"
-++
-++#: ../hostname.c:338
-++#, c-format
-++msgid "%s: You can't change the DNS domain name with this command\n"
-++msgstr "%s: ��コマンド��DNSドメイン��変更����ん.\n"
-++
-++#: ../hostname.c:339
-++#, c-format
-++msgid ""
-++"\n"
-++"Unless you are using bind or NIS for host lookups you can change the DNS\n"
-++msgstr ""
-++"\n"
-++"ホスト���照�Bind�よ�, NISも使���場��/etc/hostsファイル\n"
-++
-++#: ../hostname.c:340
-++#, c-format
-++msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-++msgstr "��るFQDNや, (FQDN�一部分�)ドメイン�を変更����.\n"
-++
-++#: ../hostname.c:357
-++#, c-format
-++msgid "gethostname()=`%s'\n"
-++msgstr "gethostname()=`%s'\n"
-++
-++#: ../hostname.c:374
-++#, c-format
-++msgid "getdomainname()=`%s'\n"
-++msgstr "getdomainname()=`%s'\n"
-++
-++#: ../hostname.c:389
-++#, c-format
-++msgid "getnodename()=`%s'\n"
-++msgstr "getnodename()=`%s'\n"
-++
-++#: ../ifconfig.c:107
-++#, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr "Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR フラグ\n"
-++
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr "%s: インタフェースフラグ��得中�エラー�発生����:%s\n"
-++
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-++#, c-format
-++msgid "No support for INET on this system.\n"
-++msgstr "INET���システム��サ�ート�れ����ん.\n"
-++
-++#: ../ifconfig.c:193
-++#, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr "%s: インタフェースフラグ�テスト中�エラー�発生����: %s\n"
-++
-++#: ../ifconfig.c:202
-++#, c-format
-++msgid ""
-++"Usage:\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++msgstr ""
-++"使用法:\n"
-++"  ifconfig [-a] [-v] [-s] <インタフェース> [[<AF>] <アドレス>]\n"
-++
-++#: ../ifconfig.c:204
-++#, c-format
-++msgid "  [add <address>[/<prefixlen>]]\n"
-++msgstr "  [add <アドレス>[/<プレフィックス長>]]\n"
-++
-++#: ../ifconfig.c:205
-++#, c-format
-++msgid "  [del <address>[/<prefixlen>]]\n"
-++msgstr "   [del <アドレス>[/<プレフィックス長>]]\n"
-++
-++#: ../ifconfig.c:206
-++#, c-format
-++msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-++msgstr "  [[-]broadcast [<アドレス>]]  [[-]pointopoint [<アドレス>]]\n"
-++
-++#: ../ifconfig.c:207
-++#, c-format
-++msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-++msgstr "  [netmask <アドレス>]  [dstaddr <アドレス>]  [tunnel <アドレス>]\n"
-++
-++#: ../ifconfig.c:210
-++#, c-format
-++msgid "  [outfill <NN>] [keepalive <NN>]\n"
-++msgstr "  [outfill <数値>] [keepalive <数値>]\n"
-++
-++#: ../ifconfig.c:212
-++#, c-format
-++msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-++msgstr "  [hw <HW> <アドレス>]  [metric <数値>]  [mtu <数値>]\n"
-++
-++#: ../ifconfig.c:213
-++#, c-format
-++msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++
-++#: ../ifconfig.c:214
-++#, c-format
-++msgid "  [multicast]  [[-]promisc]\n"
-++msgstr "  [multicast]  [[-]promisc]\n"
-++
-++#: ../ifconfig.c:215
-++#, c-format
-++msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-++msgstr "  [mem_start <開始アドレス>] [io_addr <IOアドレス>] [irq <番�>] [media <タイプ>]\n"
-++
-++#: ../ifconfig.c:217
-++#, c-format
-++msgid "  [txqueuelen <NN>]\n"
-++msgstr "   [txqueuelen <TXキュー長>]\n"
-++
-++#: ../ifconfig.c:220
-++#, c-format
-++msgid "  [[-]dynamic]\n"
-++msgstr "  [[-]dynamic]\n"
-++
-++#: ../ifconfig.c:222
-++#, c-format
-++msgid ""
-++"  [up|down] ...\n"
-++"\n"
-++msgstr "  [up|down] ...\n\n"
-++
-++#: ../ifconfig.c:224
-++#, c-format
-++msgid "  <HW>=Hardware Type.\n"
-++msgstr "  <HW>=�ードウェアタイプ.\n"
-++
-++#: ../ifconfig.c:225
-++#, c-format
-++msgid "  List of possible hardware types:\n"
-++msgstr "  利用�能��ードウェアタイプ�リスト:\n"
-++
-++#. 1 = ARPable
-++#: ../ifconfig.c:227
-++#, c-format
-++msgid "  <AF>=Address family. Default: %s\n"
-++msgstr "  <AF>=アドレスファミリ. 標準: %s\n"
-++
-++#: ../ifconfig.c:228
-++#, c-format
-++msgid "  List of possible address families:\n"
-++msgstr "  利用�能�アドレスファミリ�リスト:\n"
-++
-++#: ../ifconfig.c:303
-++#, c-format
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr "ifconfig: オプション`%s'を解釈����ん.\n"
-++
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr "ifconfig: `--help'�使用法を見られ��.\n"
-++
-++#: ../ifconfig.c:380
-++#, c-format
-++msgid "Unknown media type.\n"
-++msgstr "�明�メディアタイプ��.\n"
-++
-++#: ../ifconfig.c:417
-++#, c-format
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr "警告: インタフェース%s���promiscモード��...�ら�他�アプリケーション�実行中���り��ん�?\n"
-++
-++#: ../ifconfig.c:429
-++#, c-format
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr "警告: インタフェース%s���MULTICASTモード��.\n"
-++
-++#: ../ifconfig.c:441
-++#, c-format
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr "警告: インタフェース%s���ALLMULTIモード��.\n"
-++
-++#: ../ifconfig.c:465
-++#, c-format
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr "警告: インタフェース%s���DYNAMICモード��.\n"
-++
-++#: ../ifconfig.c:523
-++#, c-format
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr "警告: インタフェース%s���BROADCASTモード��.\n"
-++
-++#: ../ifconfig.c:652
-++#, c-format
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr "警告: インタフェース%s���POINTOPOINTモード��.\n"
-++
-++#: ../ifconfig.c:684
-++#, c-format
-++msgid "hw address type `%s' has no handler to set address. failed.\n"
-++msgstr "�ードウェアアドレスタイプ`%s'�アドレスを設定�る�ンドラを������ん. 失敗����.\n"
-++
-++#: ../ifconfig.c:693
-++#, c-format
-++msgid "%s: invalid %s address.\n"
-++msgstr "%s: ��切�アドレス��(%s).\n"
-++
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-++#, c-format
-++msgid "No support for INET6 on this system.\n"
-++msgstr "INET6���システム��サ�ート�れ����ん.\n"
-++
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-++#, c-format
-++msgid "Interface %s not initialized\n"
-++msgstr "インタフェース%s��期化�れ����ん.\n"
-++
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, c-format
-++msgid "Bad address.\n"
-++msgstr "��切�アドレス��.\n"
-++
-++#: ../ifconfig.c:885
-++#, c-format
-++msgid "Address deletion not supported on this system.\n"
-++msgstr "アドレス削除���システム��サ�ート�れ����ん.\n"
-++
-++#: ../ifconfig.c:957
-++#, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "ifconfig:��プロトコルファミリ�アドレスを設定����ん.\n"
-++
-++#: ../ifconfig.c:983
-++#, c-format
-++msgid "No support for ECONET on this system.\n"
-++msgstr "ECONET���システム��サ�ート�れ����ん.\n"
-++
-++#: ../ifconfig.c:991
-++#, c-format
-++msgid "Don't know how to set addresses for family %d.\n"
-++msgstr "ファミリ%d�アドレス�設定方法��明��.\n"
-++
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr "警告: 少���も1��エラー�発生����. (%d)\n"
-++
-++#: ../netstat.c:434
-++#, c-format
-++msgid ""
-++"(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-++msgstr "(\"-p\"�情報を読�込���ん���: geteuid()=%d ���ルート��る����.)\n"
-++
-++#: ../netstat.c:438
-++#, c-format
-++msgid ""
-++"(Not all processes could be identified, non-owned process info\n"
-++" will not be shown, you would have to be root to see it all.)\n"
-++msgstr ""
-++"(一部�プロセス�識別�れ���, 所有�����プロセス�情報�\n"
-++"表示�れ��ん。�れら全�を見る��ルート��る必���り��.)\n"
-++
-++# translatable?
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-++msgid "LISTENING"
-++msgstr "LISTENING"
-++
-++# translatable?
-++#: ../netstat.c:446
-++msgid "CONN SENT"
-++msgstr "CONN SENT"
-++
-++# translatable?
-++#: ../netstat.c:447 ../netstat.c:1268
-++msgid "DISC SENT"
-++msgstr "DISC SENT"
-++
-++# translatable?
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-++msgid "ESTABLISHED"
-++msgstr "ESTABLISHED"
-++
-++#: ../netstat.c:470
-++#, c-format
-++msgid "Active NET/ROM sockets\n"
-++msgstr "稼�中�NET/ROMソケット\n"
-++
-++#: ../netstat.c:471
-++#, c-format
-++msgid ""
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-++msgstr "ユーザ     �信先     発信元    デ�イス  状態        Vr/Vs    �信-Q  �信-Q\n"
-++
-++#: ../netstat.c:481 ../netstat.c:1308
-++#, c-format
-++msgid "Problem reading data from %s\n"
-++msgstr "%s�ら�データ�読�込���題\n"
-++
-++# translatable?
-++#: ../netstat.c:516
-++msgid "SYN_SENT"
-++msgstr "SYN_SENT"
-++
-++# translatable?
-++#: ../netstat.c:517
-++msgid "SYN_RECV"
-++msgstr "SYN_RECV"
-++
-++# translatable?
-++#: ../netstat.c:518
-++msgid "FIN_WAIT1"
-++msgstr "FIN_WAIT1"
-++
-++# translatable?
-++#: ../netstat.c:519
-++msgid "FIN_WAIT2"
-++msgstr "FIN_WAIT2"
-++
-++# translatable?
-++#: ../netstat.c:520
-++msgid "TIME_WAIT"
-++msgstr "TIME_WAIT"
-++
-++# translatable?
-++#: ../netstat.c:521
-++msgid "CLOSE"
-++msgstr "CLOSE"
-++
-++# translatable?
-++#: ../netstat.c:522
-++msgid "CLOSE_WAIT"
-++msgstr "CLOSE_WAIT"
-++
-++# translatable?
-++#: ../netstat.c:523
-++msgid "LAST_ACK"
-++msgstr "LAST_ACK"
-++
-++# translatable?
-++#: ../netstat.c:524
-++msgid "LISTEN"
-++msgstr "LISTEN"
-++
-++# translatable?
-++#: ../netstat.c:525
-++msgid "CLOSING"
-++msgstr "CLOSING"
-++
-++#: ../netstat.c:596
-++#, c-format
-++msgid "warning, got bogus igmp6 line %d.\n"
-++msgstr "警告, ��igmp6ライン%dを得���.\n"
-++
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-++#, c-format
-++msgid "netstat: unsupported address family %d !\n"
-++msgstr "netstat: サ�ート����アドレスファミリ%d��!\n"
-++
-++# c-format
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-++#, c-format
-++msgid "warning, got bogus igmp line %d.\n"
-++msgstr "警告, ��igmpライン%dを得���.\n"
-++
-++#: ../netstat.c:677
-++#, c-format
-++msgid "Active X.25 sockets\n"
-++msgstr "稼�中�X.25ソケット\n"
-++
-++#. IMHO, Vr/Vs is not very usefull --SF
-++#: ../netstat.c:679
-++#, c-format
-++msgid ""
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-++msgstr "�信先       発信元        デ�イス  LCI  状態         Vr/Vs  �信-Q  �信-Q\n"
-++
-++#: ../netstat.c:759
-++#, c-format
-++msgid "warning, got bogus tcp line.\n"
-++msgstr "警告, ��TCPラインを得���.\n"
-++
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-++#, c-format
-++msgid "off (0.00/%ld/%d)"
-++msgstr "オフ (0.00/%ld/%d)"
-++
-++#: ../netstat.c:804
-++#, c-format
-++msgid "on (%2.2f/%ld/%d)"
-++msgstr "オン (%2.2f/%ld/%d)"
-++
-++#: ../netstat.c:809
-++#, c-format
-++msgid "keepalive (%2.2f/%ld/%d)"
-++msgstr "キープアライブ (%2.2f/%ld/%d)"
-++
-++#: ../netstat.c:814
-++#, c-format
-++msgid "timewait (%2.2f/%ld/%d)"
-++msgstr "時間待� (%2.2f/%ld/%d)"
-++
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-++#, c-format
-++msgid "unkn-%d (%2.2f/%ld/%d)"
-++msgstr "�明-%d (%2.2f/%ld/%d)"
-++
-++#: ../netstat.c:894
-++#, c-format
-++msgid "warning, got bogus udp line.\n"
-++msgstr "警告, ��UDPラインを得���.\n"
-++
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-++msgid "UNKNOWN"
-++msgstr "�明"
-++
-++#: ../netstat.c:958 ../netstat.c:1080
-++#, c-format
-++msgid "on%d (%2.2f/%ld/%d)"
-++msgstr "オン%d (%2.2f/%ld/%d)"
-++
-++#: ../netstat.c:1046
-++#, c-format
-++msgid "warning, got bogus raw line.\n"
-++msgstr "警告, ��Rawラインを得���.\n"
-++
-++#: ../netstat.c:1128
-++#, c-format
-++msgid "warning, got bogus unix line.\n"
-++msgstr "警告, ��unixラインを得���.\n"
-++
-++# translatable?
-++#: ../netstat.c:1155
-++msgid "STREAM"
-++msgstr "STREAM"
-++
-++# translatable?
-++#: ../netstat.c:1159
-++msgid "DGRAM"
-++msgstr "DGRAM"
-++
-++# translatable?
-++#: ../netstat.c:1163
-++msgid "RAW"
-++msgstr "RAW"
-++
-++# translatable?
-++#: ../netstat.c:1167
-++msgid "RDM"
-++msgstr "RDM"
-++
-++# translatable?
-++#: ../netstat.c:1171
-++msgid "SEQPACKET"
-++msgstr "SEQPACKET"
-++
-++# translatable?
-++#: ../netstat.c:1180
-++msgid "FREE"
-++msgstr "FREE"
-++
-++# translatable?
-++#: ../netstat.c:1196
-++msgid "CONNECTING"
-++msgstr "CONNECTING"
-++
-++# translatable?
-++#: ../netstat.c:1200
-++msgid "CONNECTED"
-++msgstr "CONNECTED"
-++
-++# translatable?
-++#: ../netstat.c:1204
-++msgid "DISCONNECTING"
-++msgstr "DISCONNECTING"
-++
-++#: ../netstat.c:1235
-++#, c-format
-++msgid "Active UNIX domain sockets "
-++msgstr "稼�中�UNIXドメインソケット "
-++
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-++msgid "(servers and established)"
-++msgstr "(サー��確立)"
-++
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-++msgid "(only servers)"
-++msgstr "(サー���)"
-++
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-++msgid "(w/o servers)"
-++msgstr "(w/oサー�)"
-++
-++#: ../netstat.c:1245
-++#, c-format
-++msgid ""
-++"\n"
-++"Proto RefCnt Flags       Type       State         I-Node"
-++msgstr ""
-++"\n"
-++"Proto RefCnt フラグ      タイプ     状態         Iノード"
-++
-++#: ../netstat.c:1247
-++#, c-format
-++msgid " Path\n"
-++msgstr " パス\n"
-++
-++# translatable?
-++#: ../netstat.c:1267
-++msgid "SABM SENT"
-++msgstr "SABM SENT"
-++
-++# translatable?
-++#: ../netstat.c:1270
-++msgid "RECOVERY"
-++msgstr "RECOVERY"
-++
-++#: ../netstat.c:1284
-++#, c-format
-++msgid "Active AX.25 sockets\n"
-++msgstr "稼�中�AX.25ソケット\n"
-++
-++#: ../netstat.c:1285
-++#, c-format
-++msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-++msgstr "�信先     発信元     デ�イス 状態        Vr/Vs    �信-Q  �信-Q\n"
-++
-++#: ../netstat.c:1328
-++#, c-format
-++msgid "problem reading data from %s\n"
-++msgstr "%s�ら�データ読�込�中��題\n"
-++
-++#: ../netstat.c:1379
-++#, c-format
-++msgid ""
-++"Active IPX sockets\n"
-++"Proto Recv-Q Send-Q Local Address              Foreign Address            "
-++"State"
-++msgstr ""
-++"稼�中�IPXソケット\n"
-++"Proto �信-Q �信-Q 内部アドレス               外部アドレス               状"
-++"æ…‹"
-++
-++#: ../netstat.c:1381
-++#, c-format
-++msgid " User"
-++msgstr " ユーザ"
-++
-++# translatable?
-++#: ../netstat.c:1415
-++msgid "ESTAB"
-++msgstr "ESTAB"
-++
-++# translatable?
-++#: ../netstat.c:1423
-++msgid "UNK."
-++msgstr "UNK."
-++
-++#: ../netstat.c:1461
-++#, c-format
-++msgid "Kernel Interface table\n"
-++msgstr "カー�ルインタフェーステーブル\n"
-++
-++#: ../netstat.c:1465
-++#, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr "Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR フラグ\n"
-++
-++#: ../netstat.c:1469
-++msgid "missing interface information"
-++msgstr "インタフェース情報�足り��ん"
-++
-++#: ../netstat.c:1492
-++#, c-format
-++msgid ""
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-++msgstr ""
-++"使用法: netstat [-veenNcCF] [<アドレスファミリ>] -r\n"
-++"        netstat {-V|--version|-h|--help}\n"
-++
-++#: ../netstat.c:1493
-++#, c-format
-++msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-++msgstr "        netstat [-vnNcaeol] [<ソケット> ...]\n"
-++
-++#: ../netstat.c:1494
-++#, c-format
-++msgid ""
-++"       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-++"\n"
-++msgstr "        netstat { [-veenNac] -i | [-cnNe] -M | -s }\n\n"
-++
-++#: ../netstat.c:1496
-++#, c-format
-++msgid "        -r, --route              display routing table\n"
-++msgstr "        -r, --routing            経路テーブル�表示\n"
-++
-++#: ../netstat.c:1497
-++#, c-format
-++msgid "        -i, --interfaces         display interface table\n"
-++msgstr "        -i, --interfaces         インタフェーステーブル�表示\n"
-++
-++#: ../netstat.c:1498
-++#, c-format
-++msgid "        -g, --groups             display multicast group memberships\n"
-++msgstr "        -g, --groups             マル�キャスト・グループメン�シップ�表示\n"
-++
-++#: ../netstat.c:1499
-++#, c-format
-++msgid ""
-++"        -s, --statistics         display networking statistics (like SNMP)\n"
-++msgstr ""
-++"        -s, --statistics         (SNMP�よ��)�ットワーク統計を表示\n"
-++
-++#: ../netstat.c:1501
-++#, c-format
-++msgid ""
-++"        -M, --masquerade         display masqueraded connections\n"
-++"\n"
-++msgstr ""
-++"        -M, --masquerade         マスカレード接続�表示\n"
-++"\n"
-++
-++#: ../netstat.c:1505
-++#, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-++msgstr "        --numeric-hosts          ホスト�をレゾルブ���\n"
-++
-++#: ../netstat.c:1506
-++#, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-++msgstr "        --numeric-ports          �ート�をレゾルブ���\n"
-++
-++#: ../netstat.c:1507
-++#, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-++msgstr "        --numeric-users          ユーザ�をレゾルブ���\n"
-++
-++#: ../netstat.c:1508
-++#, c-format
-++msgid "        -N, --symbolic           resolve hardware names\n"
-++msgstr "        -N, --symbolic           �ードウェア�をレゾルブ�る\n"
-++
-++#: ../netstat.c:1509 ../route.c:88
-++#, c-format
-++msgid "        -e, --extend             display other/more information\n"
-++msgstr "        -e, --extend             他�情報や多��情報を表示�る\n"
-++
-++#: ../netstat.c:1510
-++#, c-format
-++msgid "        -p, --programs           display PID/Program name for sockets\n"
-++msgstr "        -p, --programs           ソケット�PID/プログラム�を表示�る\n"
-++
-++#: ../netstat.c:1511
-++#, c-format
-++msgid ""
-++"        -c, --continuous         continuous listing\n"
-++"\n"
-++msgstr ""
-++"        -c, --continous          継続的�表示\n"
-++"\n"
-++
-++#: ../netstat.c:1512
-++#, c-format
-++msgid "        -l, --listening          display listening server sockets\n"
-++msgstr "        -l, --listening          サー��listenソケット�表示\n"
-++
-++#: ../netstat.c:1513
-++#, c-format
-++msgid ""
-++"        -a, --all, --listening   display all sockets (default: connected)\n"
-++msgstr "        -a, --all, --listening   全��情報を表示 (標準: connected)\n"
-++
-++#: ../netstat.c:1514
-++#, c-format
-++msgid "        -o, --timers             display timers\n"
-++msgstr "        -o, --timers             タイマ�表示\n"
-++
-++#: ../netstat.c:1515 ../route.c:89
-++#, c-format
-++msgid ""
-++"        -F, --fib                display Forwarding Information Base "
-++"(default)\n"
-++msgstr "        -F, --fib                フォワード情報ベースを表示�る(標準)\n"
-++
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-++msgid ""
-++"        -C, --cache              display routing cache instead of FIB\n"
-++"\n"
-++msgstr "        -C, --cache              FIB���り�経路キャッシュを表示�る\n\n"
-++
-++#: ../netstat.c:1518
-++#, c-format
-++msgid ""
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-++msgstr ""
-++"  <ソケット>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-++
-++#: ../netstat.c:1519
-++#, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>='-6|-4'���'-A <af>'���'--<af>'を利用; 標準: %s\n"
-++
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-++msgid "  List of possible address families (which support routing):\n"
-++msgstr "  (ルーティングをサ�ート��)利用�能�アドレスファミリ�リスト:\n"
-++
-++#: ../netstat.c:1753
-++#, c-format
-++msgid "Active Internet connections "
-++msgstr "稼�中�インター�ット接続 "
-++
-++#: ../netstat.c:1763
-++#, c-format
-++msgid ""
-++"\n"
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-++msgstr ""
-++"\n"
-++"Proto �信-Q �信-Q 内部アドレス            外部アドレス            状"
-++"æ…‹       "
-++
-++#: ../netstat.c:1765
-++#, c-format
-++msgid " User       Inode     "
-++msgstr " ユーザ    Iノード    "
-++
-++#: ../netstat.c:1768
-++#, c-format
-++msgid " Timer"
-++msgstr "タイマ"
-++
-++#: ../netstat.c:1798
-++#, c-format
-++msgid "IPv4 Group Memberships\n"
-++msgstr "IPv4グループメン�シップ\n"
-++
-++#: ../netstat.c:1799
-++#, c-format
-++msgid "Interface       RefCnt Group\n"
-++msgstr "インタフェース �照Cnt グループ\n"
-++
-++#: ../rarp.c:44
-++msgid "This kernel does not support RARP.\n"
-++msgstr "��カー�ル�RARPをサ�ート�����ん.\n"
-++
-++#: ../rarp.c:83
-++#, c-format
-++msgid "no RARP entry for %s.\n"
-++msgstr "%s�RARPエントリ��り��ん.\n"
-++
-++#: ../rarp.c:96
-++#, c-format
-++msgid "%s: bad hardware address\n"
-++msgstr "%s: �正��ードウェアアドレス��\n"
-++
-++#: ../rarp.c:128
-++#, c-format
-++msgid "rarp: cannot open file %s:%s.\n"
-++msgstr "rarp: ファイル%sを開���ん:%s.\n"
-++
-++#: ../rarp.c:140
-++#, c-format
-++msgid "rarp: format error at %s:%u\n"
-++msgstr "rarp: %s:%u行�フォーマットエラー��り��\n"
-++
-++#: ../rarp.c:144 ../rarp.c:289
-++#, c-format
-++msgid "rarp: %s: unknown host\n"
-++msgstr "rarp: %s: �明�ホスト��\n"
-++
-++#: ../rarp.c:147
-++#, c-format
-++msgid "rarp: cannot set entry from %s:%u\n"
-++msgstr "rarp: %s:%u行�らエントリを設定����ん\n"
-++
-++#: ../rarp.c:176
-++#, c-format
-++msgid "Usage: rarp -a                               list entries in cache.\n"
-++msgstr ""
-++"使用法: rarp -a                              キャッシュエントリ�表示.\n"
-++
-++#: ../rarp.c:177
-++#, c-format
-++msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-++msgstr ""
-++"       rarp -d <ホスト�>                    キャッシュ�らエントリを削除�"
-++"ã‚‹.\n"
-++
-++#: ../rarp.c:178
-++#, c-format
-++msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-++msgstr ""
-++"       rarp [<HW>] -s <ホスト�> <�ードウェアアドレス>\n"
-++"                                             キャッシュ�エントリを追加.\n"
-++
-++#: ../rarp.c:179
-++#, c-format
-++msgid ""
-++"       rarp -f                               add entries from /etc/ethers.\n"
-++msgstr ""
-++"       rarp -f                               /etc/ethers�らエントリ追加.\n"
-++
-++#: ../rarp.c:180
-++#, c-format
-++msgid ""
-++"       rarp -V                               display program version.\n"
-++"\n"
-++msgstr "       rarp -V                               �ージョン情報�出力.\n"
-++
-++#: ../rarp.c:238
-++#, c-format
-++msgid "%s: illegal option mix.\n"
-++msgstr "%s: オプション�組���間������.\n"
-++
-++#: ../rarp.c:269
-++#, c-format
-++msgid "rarp: %s: unknown hardware type.\n"
-++msgstr "rarp: %s: �ードウェアタイプ��明��.\n"
-++
-++#: ../route.c:80
-++#, c-format
-++msgid ""
-++"Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-++msgstr "使用法:route [-nNvee] [-FC] [アドレスファミリ]  カー�ル経路テーブル�表示.\n"
-++
-++#: ../route.c:81
-++#, c-format
-++msgid ""
-++"       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-++"\n"
-++msgstr ""
-++"       route [-v] [-FC] {add|del|flush}‥‥\n"
-++"\t\t\t\t   アドレスファミリ�経路テーブル�設定.\n"
-++"\n"
-++
-++#: ../route.c:83
-++#, c-format
-++msgid ""
-++"       route {-h|--help} [<AF>]              Detailed usage syntax for "
-++"specified AF.\n"
-++msgstr ""
-++"       route {-h|--help} [アドレスファミリ]\n"
-++"                                     アドレスファミリ特定�文法�説明.\n"
-++
-++#: ../route.c:84
-++#, c-format
-++msgid ""
-++"       route {-V|--version}                  Display version/author and "
-++"exit.\n"
-++"\n"
-++msgstr "       route {-V|--version}          �ージョン/作者情報�出力�終了.\n\n"
-++
-++#: ../route.c:92
-++#, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>='-A <af>'���'--<af>'を利用; 標準: %s\n"
-++
-++#: ../plipconfig.c:66
-++#, c-format
-++msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-++msgstr "使用法: plipconfig [-a] [-i] [-v] インタフェース\n"
-++
-++#: ../plipconfig.c:67
-++#, c-format
-++msgid "                  [nibble NN] [trigger NN]\n"
-++msgstr "                  [nibble 数値] [trigger 数値]\n"
-++
-++#: ../plipconfig.c:68
-++#, c-format
-++msgid "       plipconfig -V | --version\n"
-++msgstr "       plipconfig -V | --version\n"
-++
-++# translatable?
-++#: ../plipconfig.c:74
-++#, c-format
-++msgid "%s\tnibble %lu  trigger %lu\n"
-++msgstr "%s\tnibble %lu  trigger %lu\n"
-++
-++#: ../iptunnel.c:85
-++#, c-format
-++msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-++msgstr "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-++
-++#: ../iptunnel.c:86
-++#, c-format
-++msgid ""
-++"          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-++msgstr "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-++
-++#: ../iptunnel.c:87
-++#, c-format
-++msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-++msgstr "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-++
-++#: ../iptunnel.c:88
-++#, c-format
-++msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-++msgstr "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-++
-++#: ../iptunnel.c:89
-++#, c-format
-++msgid ""
-++"       iptunnel -V | --version\n"
-++"\n"
-++msgstr "       iptunnel -V | --version\n\n"
-++
-++#: ../iptunnel.c:90
-++#, c-format
-++msgid "Where: NAME := STRING\n"
-++msgstr "�味: NAME := STRING\n"
-++
-++#: ../iptunnel.c:91
-++#, c-format
-++msgid "       ADDR := { IP_ADDRESS | any }\n"
-++msgstr "       ADDR := { IP_ADDRESS | any }\n"
-++
-++#: ../iptunnel.c:92
-++#, c-format
-++msgid "       TOS  := { NUMBER | inherit }\n"
-++msgstr "       TOS  := { NUMBER | inherit }\n"
-++
-++#: ../iptunnel.c:93
-++#, c-format
-++msgid "       TTL  := { 1..255 | inherit }\n"
-++msgstr "       TTL  := { 1..255 | inherit }\n"
-++
-++#: ../iptunnel.c:94
-++#, c-format
-++msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-++msgstr "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-++
-++#: ../iptunnel.c:332
-++#, c-format
-++msgid "Keys are not allowed with ipip and sit.\n"
-++msgstr "キー�ipip�よ�sit��許��れ��ん.\n"
-++
-++#: ../iptunnel.c:352
-++#, c-format
-++msgid "Broadcast tunnel requires a source address.\n"
-++msgstr "ブロードキャストトン�ル�発信元アドレス�必���.\n"
-++
-++#: ../iptunnel.c:367
-++#, c-format
-++msgid "ttl != 0 and noptmudisc are incompatible\n"
-++msgstr "ttl != 0�よ�noptmudisc�矛盾���\n"
-++
-++#: ../iptunnel.c:379
-++#, c-format
-++msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-++msgstr "トン�ルモードを決定����ん(ipip, gre���sit)\n"
-++
-++#: ../iptunnel.c:417
-++#, c-format
-++msgid "%s: %s/ip  remote %s  local %s "
-++msgstr "%s: %s/ip  リモート%s  ローカル%s "
-++
-++#: ../iptunnel.c:421
-++msgid "unknown"
-++msgstr "�明"
-++
-++# FIXME: what does it mean?
-++#: ../iptunnel.c:453
-++#, c-format
-++msgid "  Drop packets out of sequence.\n"
-++msgstr "  シーケンス�ら外れ�パケットをドロップ.\n"
-++
-++#: ../iptunnel.c:455
-++#, c-format
-++msgid "  Checksum in received packet is required.\n"
-++msgstr "  �信パケット��ェックサム�必須��.\n"
-++
-++# FIXME: what does it mean?
-++#: ../iptunnel.c:457
-++#, c-format
-++msgid "  Sequence packets on output.\n"
-++msgstr "  �信�シーケンスパケット.\n"
-++
-++# FIXME: what does it mean?
-++#: ../iptunnel.c:459
-++#, c-format
-++msgid "  Checksum output packets.\n"
-++msgstr "  �信パケット��ェックサム.\n"
-++
-++#: ../iptunnel.c:487
-++#, c-format
-++msgid "Wrong format of /proc/net/dev. Sorry.\n"
-++msgstr "/proc/net/dev��正�フォーマット��. ����ん.\n"
-++
-++#: ../iptunnel.c:500
-++#, c-format
-++msgid "Failed to get type of [%s]\n"
-++msgstr "[%s]�タイプ��得�失敗\n"
-++
-++#: ../iptunnel.c:516
-++#, c-format
-++msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-++msgstr "RX: パケット   �イト      エラー  CsumErrs outOfSeq マル�キャスト\n"
-++
-++#: ../iptunnel.c:519
-++#, c-format
-++msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-++msgstr "TX: パケット   �イト       エラー DeadLoop NoRoute  �ッファ��\n"
-++
-++#: ../statistics.c:47
-++msgid "ICMP input histogram:"
-++msgstr "ICMP入力ヒストグラム:"
-++
-++#: ../statistics.c:48
-++msgid "ICMP output histogram:"
-++msgstr "ICMP出力ヒストグラム:"
-++
-++#: ../statistics.c:65
-++#, c-format
-++msgid "Forwarding is %s"
-++msgstr "フォワード�%s��"
-++
-++#: ../statistics.c:66
-++#, c-format
-++msgid "Default TTL is %u"
-++msgstr "標準TTL�%u��"
-++
-++#: ../statistics.c:67
-++#, c-format
-++msgid "%u total packets received"
-++msgstr "�計%uパケットを�信"
-++
-++#: ../statistics.c:68
-++#, c-format
-++msgid "%u with invalid headers"
-++msgstr "��当�ヘッダ�%u"
-++
-++#: ../statistics.c:69
-++#, c-format
-++msgid "%u with invalid addresses"
-++msgstr "��当�アドレス�%u"
-++
-++#: ../statistics.c:70
-++#, c-format
-++msgid "%u forwarded"
-++msgstr "%u�転�"
-++
-++#: ../statistics.c:71
-++#, c-format
-++msgid "%u with unknown protocol"
-++msgstr "%u��明�プロトコル"
-++
-++#: ../statistics.c:72
-++#, c-format
-++msgid "%u incoming packets discarded"
-++msgstr "%u��信パケットを破棄"
-++
-++#: ../statistics.c:73
-++#, c-format
-++msgid "%u incoming packets delivered"
-++msgstr "%u��信パケットを��"
-++
-++#: ../statistics.c:74
-++#, c-format
-++msgid "%u requests sent out"
-++msgstr "%u��求を�信"
-++
-++#. ?
-++#: ../statistics.c:75
-++#, c-format
-++msgid "%u outgoing packets dropped"
-++msgstr "%u��信パケットをドロップ"
-++
-++#: ../statistics.c:76
-++#, c-format
-++msgid "%u dropped because of missing route"
-++msgstr "�明�経路�%uをドロップ"
-++
-++#: ../statistics.c:77
-++#, c-format
-++msgid "%u fragments dropped after timeout"
-++msgstr "タイムアウト後�%u�フラグメントをドロップ"
-++
-++#: ../statistics.c:78
-++#, c-format
-++msgid "%u reassemblies required"
-++msgstr "%u��構築�必�"
-++
-++#. ?
-++#: ../statistics.c:79
-++#, c-format
-++msgid "%u packets reassembled ok"
-++msgstr "%uパケット��構築��功"
-++
-++#: ../statistics.c:80
-++#, c-format
-++msgid "%u packet reassembles failed"
-++msgstr "%uパケット��構築�失敗"
-++
-++#: ../statistics.c:81
-++#, c-format
-++msgid "%u fragments received ok"
-++msgstr "%uフラグメント��信��功"
-++
-++#: ../statistics.c:82
-++#, c-format
-++msgid "%u fragments failed"
-++msgstr "%uフラグメント�失敗"
-++
-++#: ../statistics.c:83
-++#, c-format
-++msgid "%u fragments created"
-++msgstr "%uフラグメントを生�"
-++
-++#: ../statistics.c:88
-++#, c-format
-++msgid "%u ICMP messages received"
-++msgstr "%u�ICMPメッセージ�信"
-++
-++#: ../statistics.c:89
-++#, c-format
-++msgid "%u input ICMP message failed."
-++msgstr "%u�ICMPメッセージ入力失敗."
-++
-++#: ../statistics.c:90 ../statistics.c:103
-++#, c-format
-++msgid "destination unreachable: %u"
-++msgstr "�信先到���: %u"
-++
-++#: ../statistics.c:91
-++#, c-format
-++msgid "timeout in transit: %u"
-++msgstr "�信時間オー�: %u"
-++
-++#: ../statistics.c:92 ../statistics.c:105
-++#, c-format
-++msgid "wrong parameters: %u"
-++msgstr "���パラメータ: %u"
-++
-++#. ?
-++#: ../statistics.c:93
-++#, c-format
-++msgid "source quenches: %u"
-++msgstr "発信元消滅: %u"
-++
-++#: ../statistics.c:94
-++#, c-format
-++msgid "redirects: %u"
-++msgstr "リダイレクト: %u"
-++
-++#: ../statistics.c:95
-++#, c-format
-++msgid "echo requests: %u"
-++msgstr "エコー�求: %u"
-++
-++#: ../statistics.c:96 ../statistics.c:109
-++#, c-format
-++msgid "echo replies: %u"
-++msgstr "エコー応答: %u"
-++
-++#: ../statistics.c:97
-++#, c-format
-++msgid "timestamp request: %u"
-++msgstr "タイムスタンプ�求: %u"
-++
-++#: ../statistics.c:98
-++#, c-format
-++msgid "timestamp reply: %u"
-++msgstr "タイムスタンプ応答: %u"
-++
-++#: ../statistics.c:99
-++#, c-format
-++msgid "address mask request: %u"
-++msgstr "アドレスマスク�求: %u"
-++
-++#. ?
-++#: ../statistics.c:100 ../statistics.c:113
-++#, c-format
-++msgid "address mask replies: %u"
-++msgstr "アドレスマスク応答: %u"
-++
-++#. ?
-++#: ../statistics.c:101
-++#, c-format
-++msgid "%u ICMP messages sent"
-++msgstr "%u�ICMPメッセージ�信"
-++
-++#: ../statistics.c:102
-++#, c-format
-++msgid "%u ICMP messages failed"
-++msgstr "%u�ICMPメッセージ失敗"
-++
-++#: ../statistics.c:104
-++#, c-format
-++msgid "time exceeded: %u"
-++msgstr "時間切れ: %u"
-++
-++#. ?
-++#: ../statistics.c:106
-++#, c-format
-++msgid "source quench: %u"
-++msgstr "発信元消滅: %u"
-++
-++#: ../statistics.c:107
-++#, c-format
-++msgid "redirect: %u"
-++msgstr "リダイレクト: %u"
-++
-++#: ../statistics.c:108
-++#, c-format
-++msgid "echo request: %u"
-++msgstr "エコー�求: %u"
-++
-++#: ../statistics.c:110
-++#, c-format
-++msgid "timestamp requests: %u"
-++msgstr "タイムスタンプ�求: %u"
-++
-++#: ../statistics.c:111
-++#, c-format
-++msgid "timestamp replies: %u"
-++msgstr "タイムスタンプ応答: %u"
-++
-++#: ../statistics.c:112
-++#, c-format
-++msgid "address mask requests: %u"
-++msgstr "アドレスマスク�求: %u"
-++
-++#: ../statistics.c:118
-++#, c-format
-++msgid "RTO algorithm is %s"
-++msgstr "RTOアルゴリズム�%s��"
-++
-++#: ../statistics.c:122
-++#, c-format
-++msgid "%u active connections openings"
-++msgstr "%u�能動接続開始"
-++
-++#: ../statistics.c:123
-++#, c-format
-++msgid "%u passive connection openings"
-++msgstr "%u��動接続開始"
-++
-++#: ../statistics.c:124
-++#, c-format
-++msgid "%u failed connection attempts"
-++msgstr "%u�接続試行失敗"
-++
-++#: ../statistics.c:125
-++#, c-format
-++msgid "%u connection resets received"
-++msgstr "%u�接続リセット�信"
-++
-++#: ../statistics.c:126
-++#, c-format
-++msgid "%u connections established"
-++msgstr "%u�接続確立"
-++
-++#: ../statistics.c:127
-++#, c-format
-++msgid "%u segments received"
-++msgstr "%uセグメント��信"
-++
-++#: ../statistics.c:128
-++#, c-format
-++msgid "%u segments send out"
-++msgstr "%uセグメント��信"
-++
-++#: ../statistics.c:129
-++#, c-format
-++msgid "%u segments retransmited"
-++msgstr "%uセグメント��転�"
-++
-++#: ../statistics.c:130
-++#, c-format
-++msgid "%u bad segments received."
-++msgstr "%u��正セグメント�信."
-++
-++#: ../statistics.c:131
-++#, c-format
-++msgid "%u resets sent"
-++msgstr "%u�リセット�信"
-++
-++#: ../statistics.c:136
-++#, c-format
-++msgid "%u packets received"
-++msgstr "%uパケット�信"
-++
-++#: ../statistics.c:137
-++#, c-format
-++msgid "%u packets to unknown port received."
-++msgstr "�明��ート�ら�%uパケット��信."
-++
-++#: ../statistics.c:138
-++#, c-format
-++msgid "%u packet receive errors"
-++msgstr "%u�パケット�信エラー"
-++
-++#: ../statistics.c:139
-++#, c-format
-++msgid "%u packets sent"
-++msgstr "%u�パケットを�信"
-++
-++#: ../statistics.c:144
-++#, c-format
-++msgid "%u SYN cookies sent"
-++msgstr "%u�SYNクッキーを�信"
-++
-++#: ../statistics.c:145
-++#, c-format
-++msgid "%u SYN cookies received"
-++msgstr "%u�SYNクッキーを�信"
-++
-++#: ../statistics.c:146
-++#, c-format
-++msgid "%u invalid SYN cookies received"
-++msgstr "%u���当�SYNクッキーを�信"
-++
-++#: ../statistics.c:148
-++#, c-format
-++msgid "%u resets received for embryonic SYN_RECV sockets"
-++msgstr "%u�未完��SYN_RECVソケット�対�るリセットを�信"
-++
-++#: ../statistics.c:150
-++#, c-format
-++msgid "%u packets pruned from receive queue because of socket buffer overrun"
-++msgstr "%u�パケットをソケット�ッファオー�ラン����信キュー�ら除外"
-++
-++#. obsolete: 2.2.0 doesn't do that anymore
-++#: ../statistics.c:153
-++#, c-format
-++msgid "%u packets pruned from receive queue"
-++msgstr "%u�パケットを�信キュー�ら除外"
-++
-++#: ../statistics.c:154
-++#, c-format
-++msgid ""
-++"%u packets dropped from out-of-order queue because of socket buffer overrun"
-++msgstr "%u�パケット�ソケット�ッファオー�ーラン���out-of-orderキュー�らドロップ"
-++
-++#: ../statistics.c:156
-++#, c-format
-++msgid "%u ICMP packets dropped because they were out-of-window"
-++msgstr "%u�ICMPパケット�out-of-window���ドロップ"
-++
-++#: ../statistics.c:158
-++#, c-format
-++msgid "%u ICMP packets dropped because socket was locked"
-++msgstr "%u�ICMPパケットをソケット�ロック�よ��ドロップ"
-++
-++# FIXME: what does it mean?
-++#: ../statistics.c:160
-++#, c-format
-++msgid "%u TCP sockets finished time wait in fast timer"
-++msgstr "%u�TCPソケット�ファーストタイマ��時間待�を完了"
-++
-++# FIXME
-++#: ../statistics.c:161
-++#, c-format
-++msgid "%u time wait sockets recycled by time stamp"
-++msgstr "%u�時間待�ソケット�タイムスタンプ��利用"
-++
-++# FIXME
-++#: ../statistics.c:162
-++#, c-format
-++msgid "%u TCP sockets finished time wait in slow timer"
-++msgstr "%u�TCPソケット�スロータイマ��時間待�を完了"
-++
-++#: ../statistics.c:163
-++#, c-format
-++msgid "%u passive connections rejected because of time stamp"
-++msgstr "%u��動的接続�タイムスタンプ����拒�"
-++
-++#: ../statistics.c:165
-++#, c-format
-++msgid "%u active connections rejected because of time stamp"
-++msgstr "%u�能動的接続�タイムスタンプ����拒�"
-++
-++#: ../statistics.c:167
-++#, c-format
-++msgid "%u packets rejects in established connections because of timestamp"
-++msgstr "%u�パケット�タイムスタンプ����接続確立を拒�"
-++
-++#: ../statistics.c:169
-++#, c-format
-++msgid "%u delayed acks sent"
-++msgstr "%u��延ackを�信"
-++
-++# FIXME
-++#: ../statistics.c:170
-++#, c-format
-++msgid "%u delayed acks further delayed because of locked socket"
-++msgstr "%u��延ack�ロック�れ�ソケット�����ら��延"
-++
-++#: ../statistics.c:172
-++#, c-format
-++msgid "Quick ack mode was activated %u times"
-++msgstr "クイックackモード�%u回稼�"
-++
-++# FIXME
-++#: ../statistics.c:173
-++#, c-format
-++msgid "%u times the listen queue of a socket overflowed"
-++msgstr "ソケット�リスンキュー�%u回オー�フロー"
-++
-++# FIXME
-++#: ../statistics.c:175
-++#, c-format
-++msgid "%u SYNs to LISTEN sockets ignored"
-++msgstr "%u�ソケットリスンSYN�無視"
-++
-++#: ../statistics.c:176
-++#, c-format
-++msgid "%u packets directly queued to recvmsg prequeue."
-++msgstr "%uパケットをrecvmsgプレキュー�直接キュー."
-++
-++#: ../statistics.c:178
-++#, c-format
-++msgid "%u of bytes directly received from backlog"
-++msgstr "%u�イトを�ックログ�ら直接�信"
-++
-++#: ../statistics.c:180
-++#, c-format
-++msgid "%u of bytes directly received from prequeue"
-++msgstr "%u�イトをプレキュー�ら直接�信"
-++
-++#: ../statistics.c:182
-++#, c-format
-++msgid "%u packets dropped from prequeue"
-++msgstr "%u�パケットをプレキュー�らドロップ"
-++
-++#: ../statistics.c:183
-++#, c-format
-++msgid "%u packet headers predicted"
-++msgstr "%u�パケットヘッダを予測"
-++
-++#: ../statistics.c:184
-++#, c-format
-++msgid "%u packets header predicted and directly queued to user"
-++msgstr "%u�パケットヘッダを予測��ユーザ�直接キュー"
-++
-++#: ../statistics.c:186
-++#, c-format
-++msgid "Ran %u times out of system memory during packet sending"
-++msgstr "%u回�パケット�信中�システムメモリ��れ"
-++
-++#: ../statistics.c:188
-++#, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr "データを����%u�承���信"
-++
-++#: ../statistics.c:189
-++#, c-format
-++msgid "%u predicted acknowledgments"
-++msgstr "%u�予測承�"
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr "高速����よるパケットロス�%u回�回復"
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr "SACKデータ�よるパケットロス�%u回�回復"
-++
-++#: ../statistics.c:192
-++#, c-format
-++msgid "%u bad SACKs received"
-++msgstr "%u��正�SACKを�信"
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr "FACKを使��%u回�検出�れ�並�替�"
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr "SACKを使��%u回�検出�れ�並�替�"
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr "タイムスタンプを使��%u回�検出�れ�並�替�"
-++
-++# FIXME:what does it mean?
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr "高速��を使��%u回�検出�れ�並�替�"
-++
-++#: ../statistics.c:197
-++#, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr "%u�輻輳ウィンドウを完全�回復"
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr "Hoeヒューリスティックを使��%u�輻輳ウィンドウを部分的�回復"
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr "DSACKを使��%u�輻輳ウィンドウを回復"
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr "部分ack後�%u�輻輳ウィンドウを回復"
-++
-++#: ../statistics.c:201
-++#, c-format
-++msgid "%u retransmits lost"
-++msgstr "%u���ロスト"
-++
-++# FIXME
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr "高速��後�%u�タイムアウト"
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr "SACK復元後�%u�タイムアウト"
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr "状態ロス��%u�タイムアウト"
-++
-++#: ../statistics.c:205
-++#, c-format
-++msgid "%u fast retransmits"
-++msgstr "%u�高速��"
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr "%u�転���"
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr "スロースタート��%u���"
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr "%u���他�TCPタイムアウト"
-++
-++# FIXME
-++#: ../statistics.c:209
-++#, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "%d�高速��失敗"
-++
-++#: ../statistics.c:210
-++#, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "%u�sack��失敗"
-++
-++# FIXME
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr "直接処������る�スケジュール�れ�%u回�レシー�"
-++
-++# FIXME
-++#: ../statistics.c:212
-++#, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr "%u�パケットを低ソケット�ッファ�����信キュー�ら除外"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr "%u�DSACKを��パケット����信"
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr "%u�DSACKを順�外パケット����信"
-++
-++#: ../statistics.c:215
-++#, c-format
-++msgid "%u DSACKs received"
-++msgstr "%u�DSACKを�信"
-++
-++#: ../statistics.c:216
-++#, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "%u�DSACKを順�外パケット����信"
-++
-++#: ../statistics.c:217
-++#, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "予期��SYN����%u�接続をリセット"
-++
-++#: ../statistics.c:218
-++#, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "予期��データ����%u�接続をリセット"
-++
-++#: ../statistics.c:219
-++#, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "早期�ユーザ�クローズ����%u�接続をリセット"
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr "メモリ�制約����%u�接続を中止"
-++
-++#: ../statistics.c:221
-++#, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "タイムアウト����%u�接続を中止"
-++
-++# FIXME
-++#: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr "ユーザ�長期タイムアウト��クローズ後�%u�接続�中止"
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr "メモリ�足����RST��信�%u回�能"
-++
-++# FIXME
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr "TCP�少��メモリ�%u回実行"
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr "%u�TCPデータ�イベントをロス"
-++
-++#: ../statistics.c:292
-++msgid "enabled"
-++msgstr "有効"
-++
-++#: ../statistics.c:292
-++msgid "disabled"
-++msgstr "無効"
-++
-++#: ../statistics.c:375
-++msgid "error parsing /proc/net/snmp"
-++msgstr "/proc/net/snmp�処�中�エラー�発生����"
-++
-++#: ../statistics.c:388
-++msgid "cannot open /proc/net/snmp"
-++msgstr "/proc/net/snmpを開���ん"
-++
-++#: ../lib/activate.c:69
-++#, c-format
-++msgid "Hardware type `%s' not supported.\n"
-++msgstr "�ードウェアタイプ`%s'�サ�ート�れ����ん.\n"
-++
-++#: ../lib/activate.c:73
-++#, c-format
-++msgid "Cannot change line discipline to `%s'.\n"
-++msgstr "`%s'�line disciplineを変更����ん.\n"
-++
-++#: ../lib/af.c:153 ../lib/hw.c:161
-++msgid "UNSPEC"
-++msgstr "�明��ット"
-++
-++#: ../lib/af.c:155
-++msgid "UNIX Domain"
-++msgstr "UNIXドメイン"
-++
-++#: ../lib/af.c:158
-++msgid "DARPA Internet"
-++msgstr "DARPAインター�ット"
-++
-++#: ../lib/af.c:161
-++msgid "IPv6"
-++msgstr "IPv6"
-++
-++#: ../lib/af.c:164 ../lib/hw.c:182
-++msgid "AMPR AX.25"
-++msgstr "AMPR AX.25"
-++
-++#: ../lib/af.c:167 ../lib/hw.c:188
-++msgid "AMPR NET/ROM"
-++msgstr "AMPR NET/ROM"
-++
-++#: ../lib/af.c:170
-++msgid "Novell IPX"
-++msgstr "Novell IPX"
-++
-++#: ../lib/af.c:173
-++msgid "Appletalk DDP"
-++msgstr "アップルトークDDP"
-++
-++#: ../lib/af.c:176 ../lib/hw.c:223
-++msgid "Econet"
-++msgstr "エコ�ット"
-++
-++#: ../lib/af.c:179
-++msgid "CCITT X.25"
-++msgstr "CCITT X.25"
-++
-++#: ../lib/af.c:182 ../lib/hw.c:185
-++msgid "AMPR ROSE"
-++msgstr "AMPR ROSE"
-++
-++#: ../lib/af.c:185 ../lib/hw.c:173
-++msgid "Ash"
-++msgstr "Ash"
-++
-++#: ../lib/af.c:243
-++#, c-format
-++msgid "Please don't supply more than one address family.\n"
-++msgstr "複数�アドレスファミリを����下��.\n"
-++
-++#: ../lib/af.c:304
-++#, c-format
-++msgid "Too much address family arguments.\n"
-++msgstr "アドレスファミリ�引数�多����.\n"
-++
-++#: ../lib/af.c:315
-++#, c-format
-++msgid "Unknown address family `%s'.\n"
-++msgstr "�明�アドレスファミリ�� `%s'.\n"
-++
-++#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-++#, c-format
-++msgid "in_arcnet(%s): invalid arcnet address!\n"
-++msgstr "in_arcnet(%s): ��当�ARCNETアドレス��!\n"
-++
-++#: ../lib/arcnet.c:97
-++#, c-format
-++msgid "in_arcnet(%s): trailing : ignored!\n"
-++msgstr "in_arcnet(%s): trailing : 無効!\n"
-++
-++# translatable?
-++#: ../lib/arcnet.c:109
-++#, c-format
-++msgid "in_arcnet(%s): trailing junk!\n"
-++msgstr "in_arcnet(%s): trailing junk!\n"
-++
-++#: ../lib/ash.c:81
-++#, c-format
-++msgid "Malformed Ash address"
-++msgstr "異常�Ashアドレス��"
-++
-++#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-++#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-++#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-++msgid "[NONE SET]"
-++msgstr "[設定��]"
-++
-++#: ../lib/ax25.c:97 ../lib/netrom.c:100
-++msgid "Invalid callsign"
-++msgstr "��当�コールサイン��"
-++
-++#: ../lib/ax25.c:110 ../lib/netrom.c:113
-++msgid "Callsign too long"
-++msgstr "コールサイン�長����"
-++
-++#: ../lib/ax25_gr.c:47
-++#, c-format
-++msgid "AX.25 not configured in this system.\n"
-++msgstr "AX.25���システム��設定�れ����ん.\n"
-++
-++#: ../lib/ax25_gr.c:50
-++#, c-format
-++msgid "Kernel AX.25 routing table\n"
-++msgstr "カー�ル AX.25経路テーブル\n"
-++
-++#. xxx
-++#: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-++msgid "Destination  Iface    Use\n"
-++msgstr "�信先サイト Iface    使用数\n"
-++
-++#: ../lib/ether.c:74 ../lib/ether.c:91
-++#, c-format
-++msgid "in_ether(%s): invalid ether address!\n"
-++msgstr "in_ether(%s): ��当�イーサアドレス!\n"
-++
-++#: ../lib/ether.c:105
-++#, c-format
-++msgid "in_ether(%s): trailing : ignored!\n"
-++msgstr "in_ether(%s): trailing : 無効!\n"
-++
-++# translatable?
-++#: ../lib/ether.c:117
-++#, c-format
-++msgid "in_ether(%s): trailing junk!\n"
-++msgstr "in_ether(%s): trailing junk!\n"
-++
-++#: ../lib/fddi.c:84 ../lib/fddi.c:99
-++#, c-format
-++msgid "in_fddi(%s): invalid fddi address!\n"
-++msgstr "in_fddi(%s): ��当�fddiアドレス!\n"
-++
-++#: ../lib/fddi.c:111
-++#, c-format
-++msgid "in_fddi(%s): trailing : ignored!\n"
-++msgstr "in_fddi(%s): trailing : 無効!\n"
-++
-++# translatable?
-++#: ../lib/fddi.c:123
-++#, c-format
-++msgid "in_fddi(%s): trailing junk!\n"
-++msgstr "in_fddi(%s): trailing junk!\n"
-++
-++#: ../lib/getroute.c:101 ../lib/setroute.c:80
-++#, c-format
-++msgid "Address family `%s' not supported.\n"
-++msgstr "アドレスファミリ`%s'�サ�ート�れ����ん.\n"
-++
-++#: ../lib/getroute.c:107 ../lib/setroute.c:84
-++#, c-format
-++msgid "No routing for address family `%s'.\n"
-++msgstr "アドレスファミリ`%s'��経路�見��り��ん.\n"
-++
-++#: ../lib/hippi.c:84 ../lib/hippi.c:99
-++#, c-format
-++msgid "in_hippi(%s): invalid hippi address!\n"
-++msgstr "in_hippi(%s): ��当�hippiアドレス��!\n"
-++
-++#: ../lib/hippi.c:111
-++#, c-format
-++msgid "in_hippi(%s): trailing : ignored!\n"
-++msgstr "in_hippi(%s): trailing : 無効!\n"
-++
-++# translatable?
-++#: ../lib/hippi.c:122
-++#, c-format
-++msgid "in_hippi(%s): trailing junk!\n"
-++msgstr "in_hippi(%s): trailing junk!\n"
-++
-++#: ../lib/hw.c:160
-++msgid "Local Loopback"
-++msgstr "ローカルループ�ック"
-++
-++#: ../lib/hw.c:163
-++msgid "Serial Line IP"
-++msgstr "シリアルラインIP"
-++
-++#: ../lib/hw.c:164
-++msgid "VJ Serial Line IP"
-++msgstr "VJシリアルラインIP"
-++
-++#: ../lib/hw.c:165
-++msgid "6-bit Serial Line IP"
-++msgstr "6ビットシリアルラインIP"
-++
-++#: ../lib/hw.c:166
-++msgid "VJ 6-bit Serial Line IP"
-++msgstr "VJ 6ビットシリアルラインIP"
-++
-++#: ../lib/hw.c:167
-++msgid "Adaptive Serial Line IP"
-++msgstr "AdaptiveシリアルラインIP"
-++
-++#: ../lib/hw.c:170
-++msgid "Ethernet"
-++msgstr "イーサ�ット"
-++
-++# translatable?
-++#: ../lib/hw.c:176
-++msgid "Fiber Distributed Data Interface"
-++msgstr "Fiber Distributed Data Interface"
-++
-++#: ../lib/hw.c:179
-++msgid "HIPPI"
-++msgstr "HIPPI"
-++
-++#: ../lib/hw.c:191
-++msgid "generic X.25"
-++msgstr "ジェ�リックX.25"
-++
-++#: ../lib/hw.c:194
-++msgid "IPIP Tunnel"
-++msgstr "IPIPトン�ル"
-++
-++#: ../lib/hw.c:197
-++msgid "Point-to-Point Protocol"
-++msgstr "Point-to-Pointプロトコル"
-++
-++#: ../lib/hw.c:200
-++msgid "(Cisco)-HDLC"
-++msgstr "(Cisco)-HDLC"
-++
-++#: ../lib/hw.c:201
-++msgid "LAPB"
-++msgstr "LAPB"
-++
-++#: ../lib/hw.c:204
-++msgid "ARCnet"
-++msgstr "ARC�ット"
-++
-++#: ../lib/hw.c:207
-++msgid "Frame Relay DLCI"
-++msgstr "フレームリレーDLCI"
-++
-++#: ../lib/hw.c:208
-++msgid "Frame Relay Access Device"
-++msgstr "フレームリレーアクセスデ�イス"
-++
-++#: ../lib/hw.c:211
-++msgid "IPv6-in-IPv4"
-++msgstr "IPv6-in-IPv4"
-++
-++#: ../lib/hw.c:214
-++msgid "IrLAP"
-++msgstr "IrLAP"
-++
-++#: ../lib/hw.c:217
-++msgid "16/4 Mbps Token Ring"
-++msgstr "16/4 Mbpsトークンリング"
-++
-++#: ../lib/hw.c:219
-++msgid "16/4 Mbps Token Ring (New)"
-++msgstr "16/4 Mbpsトークンリング(新)"
-++
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr "ジェ�リックEUI-64"
-++
-++#: ../lib/inet.c:153 ../lib/inet6.c:79
-++#, c-format
-++msgid "rresolve: unsupport address family %d !\n"
-++msgstr "rresolve: アドレスファミリ%dをサ�ート�����ん!\n"
-++
-++#: ../lib/inet6.c:131
-++msgid "[UNKNOWN]"
-++msgstr "[�明]"
-++
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-++msgid "INET6 (IPv6) not configured in this system.\n"
-++msgstr "INET6(IPv6)���システム��利用��るよ�設定�れ����ん.\n"
-++
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-++msgid "Kernel IPv6 routing table\n"
-++msgstr "カー�ルIPv6 経路テーブル\n"
-++
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-++msgid ""
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-++msgstr "�信先サイト                                次回ホップ                             フラグ Metric Ref 使用数 インタフェース\n"
-++
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-++msgid "Kernel IPv6 Neighbour Cache\n"
-++msgstr "カー�ルIPv6 近隣�ットワーク�キャッシュ\n"
-++
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-++msgid ""
-++"Neighbour                                   HW Address        Iface    Flags "
-++"Ref State\n"
-++msgstr ""
-++"近隣サイト                               �ードウェアアドレス Iface   フラグ "
-++"Ref 状態\n"
-++
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-++msgid ""
-++"Neighbour                                   HW Address        Iface    Flags "
-++"Ref State            Stale(sec) Delete(sec)\n"
-++msgstr ""
-++"近隣サイト                               �ードウェアアドレス Iface   フラグ "
-++"Ref 状態             Stale[秒]  Delete[秒]\n"
-++
-++#: ../lib/inet6_sr.c:46
-++#, c-format
-++msgid "Usage: inet6_route [-vF] del Target\n"
-++msgstr "使用法: inet6_route [-vF] del ターゲット\n"
-++
-++#: ../lib/inet6_sr.c:47
-++#, c-format
-++msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-++msgstr ""
-++"        inet6_route [-vF] add ターゲット \n"
-++"                    [gw ゲートウェイ] [metric メトリック]\n"
-++"                    [[dev] インタフェース]\n"
-++
-++#: ../lib/inet6_sr.c:48
-++#, c-format
-++msgid "       inet6_route [-FC] flush      NOT supported\n"
-++msgstr "        inet6_route [-FC] flush      サ�ート�����ん\n"
-++
-++#: ../lib/inet6_sr.c:188
-++#, c-format
-++msgid "Flushing `inet6' routing table not supported\n"
-++msgstr "`inet6'経路テーブル�フラッシュ�サ�ート�����ん\n"
-++
-++#: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-++msgid "INET (IPv4) not configured in this system.\n"
-++msgstr "INET(IPv4)���システム��利用��るよ��設定�れ����ん.\n"
-++
-++#: ../lib/inet_gr.c:53
-++#, c-format
-++msgid "Kernel IP routing table\n"
-++msgstr "カー�ルIP経路テーブル\n"
-++
-++#: ../lib/inet_gr.c:56
-++#, c-format
-++msgid ""
-++"Destination     Gateway         Genmask         Flags Metric Ref    Use "
-++"Iface\n"
-++msgstr "�信先サイト    ゲートウェイ    �ットマスク   フラグ Metric Ref 使用数 インタフェース\n"
-++
-++#: ../lib/inet_gr.c:59
-++#, c-format
-++msgid ""
-++"Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-++"Iface\n"
-++msgstr "�信先サイト    ゲートウェイ    �ットマスク   フラグ   MSS Window  irtt インタフェース\n"
-++
-++#: ../lib/inet_gr.c:62
-++#, c-format
-++msgid ""
-++"Destination     Gateway         Genmask         Flags Metric Ref    Use "
-++"Iface    MSS   Window irtt\n"
-++msgstr ""
-++"�信先サイト   ゲートウェイ    �ットマスク    フラグ Metric Ref 使用数 "
-++"Iface    MSS   Window irtt\n"
-++
-++#: ../lib/inet_gr.c:237
-++#, c-format
-++msgid "Kernel IP routing cache\n"
-++msgstr "カー�ルIP経路キャッシュ\n"
-++
-++#: ../lib/inet_gr.c:258
-++#, c-format
-++msgid ""
-++"Source          Destination     Gateway         Flags Metric Ref    Use "
-++"Iface\n"
-++msgstr "発信元サイト   �信先サイト    ゲートウェイ    フラグ Metric Ref 使用数 インタフェース\n"
-++
-++#: ../lib/inet_gr.c:261
-++#, c-format
-++msgid ""
-++"Source          Destination     Gateway         Flags   MSS Window  irtt "
-++"Iface\n"
-++msgstr "発信元サイト    �信先サイト    ゲートウェイ   フラグ   MSS Window  irtt インタフェース\n"
-++
-++#: ../lib/inet_gr.c:266
-++#, c-format
-++msgid ""
-++"Source          Destination     Gateway         Flags Metric Ref    Use "
-++"Iface    MSS   Window irtt  HH  Arp\n"
-++msgstr ""
-++"発信元サイト    �信先サイト    ゲートウェイ   フラグ Metric Ref 使用数 "
-++"Iface    MSS   Window irtt   HH  Arp\n"
-++
-++#: ../lib/inet_gr.c:290
-++#, c-format
-++msgid ""
-++"Source          Destination     Gateway         Flags Metric Ref    Use "
-++"Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-++msgstr ""
-++"発信元サイト   �信先サイト     ゲートウェイ   フラグ Metric Ref 使用数 "
-++"Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-++
-++#: ../lib/inet_sr.c:51
-++#, c-format
-++msgid ""
-++"Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-++"[[dev] If]\n"
-++msgstr ""
-++"使用法:inet_route [-vF] del {-host|-net} �信先[/プレフィックス]\n"
-++"                   [gw ゲートウェイ] [metric メトリック]\n"
-++"                   [[dev] インタフェース]\n"
-++
-++#: ../lib/inet_sr.c:52
-++#, c-format
-++msgid ""
-++"       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-++msgstr ""
-++"       inet_route [-vF] add {-host|-net} �信先[/プレフィックス]\n"
-++"                   [gw ゲートウェイ] [metric メトリック]\n"
-++
-++#: ../lib/inet_sr.c:53
-++#, c-format
-++msgid ""
-++"                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-++msgstr "            [netmask �ットマスク] [mss Mss] [window W] [irtt I]\n"
-++
-++#: ../lib/inet_sr.c:54
-++#, c-format
-++msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-++msgstr "            [mod] [dyn] [reinstate] [[dev] インタフェース]\n"
-++
-++#: ../lib/inet_sr.c:55
-++#, c-format
-++msgid ""
-++"       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-++msgstr ""
-++"       inet_route [-vF] add {-host|-net} �信先[/プレフィックス]\n"
-++"                   [metric メトリック] reject\n"
-++
-++#: ../lib/inet_sr.c:56
-++#, c-format
-++msgid "       inet_route [-FC] flush      NOT supported\n"
-++msgstr "        inet_route [-FC] flush      サ�ート�����ん\n"
-++
-++#: ../lib/inet_sr.c:158
-++#, c-format
-++msgid "route: %s: cannot use a NETWORK as gateway!\n"
-++msgstr "route: %s: NETWORKをゲートウェイ���使���ん!\n"
-++
-++#: ../lib/inet_sr.c:174
-++#, c-format
-++msgid "route: Invalid MSS/MTU.\n"
-++msgstr "route: MSS/MTU���当��.\n"
-++
-++#: ../lib/inet_sr.c:187
-++#, c-format
-++msgid "route: Invalid window.\n"
-++msgstr "route: window���当��.\n"
-++
-++#: ../lib/inet_sr.c:203
-++#, c-format
-++msgid "route: Invalid initial rtt.\n"
-++msgstr "route: �期rtt���当��.\n"
-++
-++#: ../lib/inet_sr.c:261
-++#, c-format
-++msgid "route: netmask %.8x doesn't make sense with host route\n"
-++msgstr "route: �ットマスク%.8x�ホスト経路を検出���ん\n"
-++
-++#: ../lib/inet_sr.c:265
-++#, c-format
-++msgid "route: bogus netmask %s\n"
-++msgstr "route: ���ットマスク`%s'��\n"
-++
-++#: ../lib/inet_sr.c:270
-++#, c-format
-++msgid "route: netmask doesn't match route address\n"
-++msgstr "route: �ットマスク�経路アドレス�一致���ん\n"
-++
-++#: ../lib/inet_sr.c:306
-++#, c-format
-++msgid "Flushing `inet' routing table not supported\n"
-++msgstr "`inet'経路テーブル�フラッシュ�サ�ート�����ん\n"
-++
-++#: ../lib/inet_sr.c:310
-++#, c-format
-++msgid "Modifying `inet' routing cache not supported\n"
-++msgstr "`inet'経路テーブル�変更�サ�ート�����ん\n"
-++
-++#: ../lib/ipx_gr.c:52
-++#, c-format
-++msgid "IPX not configured in this system.\n"
-++msgstr "IPX���システム��設定�れ����ん.\n"
-++
-++#: ../lib/ipx_gr.c:56
-++#, c-format
-++msgid "Kernel IPX routing table\n"
-++msgstr "カー�ルIPX経路テーブル\n"
-++
-++#. xxx
-++#: ../lib/ipx_gr.c:57
-++#, c-format
-++msgid "Destination               Router Net                Router Node\n"
-++msgstr "�信先サイト              ルータ �ット             ルータノード\n"
-++
-++#: ../lib/ipx_sr.c:33
-++#, c-format
-++msgid "IPX: this needs to be written\n"
-++msgstr "IPX: �れ�書�込��必���\n"
-++
-++#: ../lib/masq_info.c:198
-++#, c-format
-++msgid "IP masquerading entries\n"
-++msgstr "IPマスカレード エントリ\n"
-++
-++#: ../lib/masq_info.c:201
-++#, c-format
-++msgid "prot   expire source               destination          ports\n"
-++msgstr "プロト expire 発信元サイト         �信先サイト         �ート\n"
-++
-++#: ../lib/masq_info.c:204
-++#, c-format
-++msgid ""
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-++msgstr ""
-++"プロト expire    �期seq delta prevd 発信元サイト         �信先サイ"
-++"ト         �ート\n"
-++
-++#: ../lib/netrom_gr.c:48
-++#, c-format
-++msgid "NET/ROM not configured in this system.\n"
-++msgstr "NET/ROM���システム��利用�能�よ��設定�れ����ん.\n"
-++
-++#: ../lib/netrom_gr.c:51
-++#, c-format
-++msgid "Kernel NET/ROM routing table\n"
-++msgstr "カー�ルNET/ROM経路テーブル\n"
-++
-++#: ../lib/netrom_gr.c:52
-++#, c-format
-++msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-++msgstr "�信先サイト ニーモニック �質  近隣サイト インタフェース\n"
-++
-++#: ../lib/netrom_sr.c:34
-++#, c-format
-++msgid "netrom usage\n"
-++msgstr "netrom使用法\n"
-++
-++#: ../lib/netrom_sr.c:44
-++#, c-format
-++msgid "NET/ROM: this needs to be written\n"
-++msgstr "NET/ROM: �れ�書�込��必���\n"
-++
-++#: ../lib/ppp.c:44
-++#, c-format
-++msgid "You cannot start PPP with this program.\n"
-++msgstr "��プログラム��PPPを開始����ん. \n"
-++
-++#: ../lib/ppp_ac.c:38
-++#, c-format
-++msgid "Sorry, use pppd!\n"
-++msgstr "申�訳�り��ん�, pppdを使��下��!\n"
-++
-++#: ../lib/rose.c:87
-++msgid "Node address must be ten digits"
-++msgstr "ノードアドレス�10進数���れ��り��ん"
-++
-++#: ../lib/rose_gr.c:51
-++#, c-format
-++msgid "ROSE not configured in this system.\n"
-++msgstr "ROSE���システム��利用�能�よ��設定�れ����ん\n"
-++
-++#: ../lib/rose_gr.c:54
-++#, c-format
-++msgid "Kernel ROSE routing table\n"
-++msgstr "カー�ルROSE経路テーブル\n"
-++
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-++#, c-format
-++msgid "in_tr(%s): invalid token ring address!\n"
-++msgstr "in_tr(%s): ��当�トークンリングアドレス��!\n"
-++
-++#: ../lib/tr.c:113
-++#, c-format
-++msgid "in_tr(%s): trailing : ignored!\n"
-++msgstr "in_tr(%s): trailing : 無効!\n"
-++
-++# translatable?
-++#: ../lib/tr.c:125
-++#, c-format
-++msgid "in_tr(%s): trailing junk!\n"
-++msgstr "in_tr(%s): trailing junk!\n"
-++
-++#: ../lib/interface.c:176
-++#, c-format
-++msgid "warning: no inet socket available: %s\n"
-++msgstr "警告: Inetソケット�利用����ん: %s\n"
-++
-++#: ../lib/interface.c:325
-++#, c-format
-++msgid "Warning: cannot open %s (%s). Limited output.\n"
-++msgstr "警告: %sを開���ん(%s). �定�れ�出力��.\n"
-++
-++#. Give better error message for this case.
-++#: ../lib/interface.c:571
-++msgid "Device not found"
-++msgstr "デ�イス�見��り��ん"
-++
-++#: ../lib/interface.c:575
-++#, c-format
-++msgid "%s: error fetching interface information: %s\n"
-++msgstr "%s: インタフェース情報を�得中�エラー�発生����: %s\n"
-++
-++#: ../lib/interface.c:608
-++msgid "     - no statistics available -"
-++msgstr "     - 統計情報を利用����ん -"
-++
-++#: ../lib/interface.c:612
-++#, c-format
-++msgid "[NO FLAGS]"
-++msgstr "[フラグ��]"
-++
-++#: ../lib/interface.c:688
-++#, c-format
-++msgid "%-9.9s Link encap:%s  "
-++msgstr "%-9.9s リンク方法:%s  "
-++
-++#: ../lib/interface.c:693
-++#, c-format
-++msgid "HWaddr %s  "
-++msgstr "�ードウェアアドレス %s "
-++
-++#: ../lib/interface.c:696
-++#, c-format
-++msgid "Media:%s"
-++msgstr "メディア:%s"
-++
-++#: ../lib/interface.c:698
-++#, c-format
-++msgid "(auto)"
-++msgstr "(自動)"
-++
-++#: ../lib/interface.c:705
-++#, c-format
-++msgid "          %s addr:%s "
-++msgstr "          %sアドレス:%s"
-++
-++#: ../lib/interface.c:708
-++#, c-format
-++msgid " P-t-P:%s "
-++msgstr " P-t-P:%s "
-++
-++#: ../lib/interface.c:711
-++#, c-format
-++msgid " Bcast:%s "
-++msgstr " ブロードキャスト:%s "
-++
-++#: ../lib/interface.c:713
-++#, c-format
-++msgid " Mask:%s\n"
-++msgstr " マスク:%s\n"
-++
-++#: ../lib/interface.c:730
-++#, c-format
-++msgid "          inet6 addr: %s/%d"
-++msgstr "          inet6アドレス: %s/%d"
-++
-++#: ../lib/interface.c:732
-++#, c-format
-++msgid " Scope:"
-++msgstr " 範囲:"
-++
-++#: ../lib/interface.c:735
-++#, c-format
-++msgid "Global"
-++msgstr "グロー�ル"
-++
-++#: ../lib/interface.c:738
-++#, c-format
-++msgid "Link"
-++msgstr "リンク"
-++
-++#: ../lib/interface.c:741
-++#, c-format
-++msgid "Site"
-++msgstr "サイト"
-++
-++# translatable?
-++#: ../lib/interface.c:744
-++#, c-format
-++msgid "Compat"
-++msgstr "Compat"
-++
-++#: ../lib/interface.c:747
-++#, c-format
-++msgid "Host"
-++msgstr "ホスト"
-++
-++#: ../lib/interface.c:750
-++#, c-format
-++msgid "Unknown"
-++msgstr "�明"
-++
-++#: ../lib/interface.c:765
-++#, c-format
-++msgid "          IPX/Ethernet II addr:%s\n"
-++msgstr "          IPX/イーサ�ットIIアドレス:%s\n"
-++
-++#: ../lib/interface.c:768
-++#, c-format
-++msgid "          IPX/Ethernet SNAP addr:%s\n"
-++msgstr "          IPX/イーサ�ットSNAPアドレス:%s\n"
-++
-++#: ../lib/interface.c:771
-++#, c-format
-++msgid "          IPX/Ethernet 802.2 addr:%s\n"
-++msgstr "          IPX/イーサ�ット802.2アドレス:%s\n"
-++
-++#: ../lib/interface.c:774
-++#, c-format
-++msgid "          IPX/Ethernet 802.3 addr:%s\n"
-++msgstr "          IPX/イーサ�ット802.3アドレス:%s\n"
-++
-++#: ../lib/interface.c:784
-++#, c-format
-++msgid "          EtherTalk Phase 2 addr:%s\n"
-++msgstr "          イーサトーク フェーズ2アドレス:%s\n"
-++
-++#: ../lib/interface.c:793
-++#, c-format
-++msgid "          econet addr:%s\n"
-++msgstr "          エコ�ットアドレス:%s\n"
-++
-++#: ../lib/interface.c:800
-++#, c-format
-++msgid "[NO FLAGS] "
-++msgstr "[フラグ��]"
-++
-++# translatable?
-++#: ../lib/interface.c:802
-++#, c-format
-++msgid "UP "
-++msgstr "UP "
-++
-++# translatable?
-++#: ../lib/interface.c:804
-++#, c-format
-++msgid "BROADCAST "
-++msgstr "BROADCAST "
-++
-++# translatable?
-++#: ../lib/interface.c:806
-++#, c-format
-++msgid "DEBUG "
-++msgstr "DEBUG "
-++
-++# translatable?
-++#: ../lib/interface.c:808
-++#, c-format
-++msgid "LOOPBACK "
-++msgstr "LOOPBACK "
-++
-++# translatable?
-++#: ../lib/interface.c:810
-++#, c-format
-++msgid "POINTOPOINT "
-++msgstr "POINTOPOINT "
-++
-++# translatable?
-++#: ../lib/interface.c:812
-++#, c-format
-++msgid "NOTRAILERS "
-++msgstr "NOTRAILERS "
-++
-++# translatable?
-++#: ../lib/interface.c:814
-++#, c-format
-++msgid "RUNNING "
-++msgstr "RUNNING "
-++
-++# translatable?
-++#: ../lib/interface.c:816
-++#, c-format
-++msgid "NOARP "
-++msgstr "NOARP "
-++
-++# translatable?
-++#: ../lib/interface.c:818
-++#, c-format
-++msgid "PROMISC "
-++msgstr "PROMISC "
-++
-++# translatable?
-++#: ../lib/interface.c:820
-++#, c-format
-++msgid "ALLMULTI "
-++msgstr "ALLMULTI "
-++
-++# translatable?
-++#: ../lib/interface.c:822
-++#, c-format
-++msgid "SLAVE "
-++msgstr "SLAVE "
-++
-++# translatable?
-++#: ../lib/interface.c:824
-++#, c-format
-++msgid "MASTER "
-++msgstr "MASTER "
-++
-++# translatable?
-++#: ../lib/interface.c:826
-++#, c-format
-++msgid "MULTICAST "
-++msgstr "MULTICAST "
-++
-++# translatable?
-++#: ../lib/interface.c:829
-++#, c-format
-++msgid "DYNAMIC "
-++msgstr "DYNAMIC "
-++
-++#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-++#: ../lib/interface.c:832
-++#, c-format
-++msgid " MTU:%d  Metric:%d"
-++msgstr " MTU:%d  メトリック:%d"
-++
-++# translatable?
-++#: ../lib/interface.c:836
-++#, c-format
-++msgid "  Outfill:%d  Keepalive:%d"
-++msgstr "  Outfill:%d  キープアライブ:%d"
-++
-++#: ../lib/interface.c:850
-++#, c-format
-++msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgstr "RXパケット:%llu エラー:%lu �失:%lu オー�ラン:%lu フレーム:%lu\n"
-++
-++#: ../lib/interface.c:855
-++#, c-format
-++msgid "             compressed:%lu\n"
-++msgstr "             圧縮:%lu\n"
-++
-++#: ../lib/interface.c:895
-++#, c-format
-++msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgstr "TXパケット:%llu エラー:%lu �失:%lu オー�ラン:%lu キャリア:%lu\n"
-++
-++#: ../lib/interface.c:899
-++#, c-format
-++msgid "          collisions:%lu "
-++msgstr "      ��(Collisions):%lu "
-++
-++#: ../lib/interface.c:901
-++#, c-format
-++msgid "compressed:%lu "
-++msgstr "圧縮:%lu "
-++
-++#: ../lib/interface.c:903
-++#, c-format
-++msgid "txqueuelen:%d "
-++msgstr "TXキュー長:%d "
-++
-++#: ../lib/interface.c:905
-++#, c-format
-++msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-++msgstr "RX�イト:%llu (%lu.%lu %s)  TX�イト:%llu (%lu.%lu %s)\n"
-++
-++#: ../lib/interface.c:916
-++#, c-format
-++msgid "Interrupt:%d "
-++msgstr "割り込�:%d "
-++
-++#. Only print devices using it for
-++#. I/O maps
-++#: ../lib/interface.c:919
-++#, c-format
-++msgid "Base address:0x%x "
-++msgstr "ベースアドレス:0x%x "
-++
-++#: ../lib/interface.c:921
-++#, c-format
-++msgid "Memory:%lx-%lx "
-++msgstr "メモリ:%lx-%lx "
-++
-++#: ../lib/interface.c:924
-++#, c-format
-++msgid "DMA chan:%x "
-++msgstr "DMA�ェイン:%x "
-++
-++#: ../lib/sockets.c:63
-++#, c-format
-++msgid "No usable address families found.\n"
-++msgstr "利用�能�アドレスファミリ�見��り��ん.\n"
-++
-++#: ../lib/util-ank.c:229
-++#, c-format
-++msgid "ip: %s is invalid inet address\n"
-++msgstr "ip: %s���切�Inetアドレス��.\n"
-++
-++#: ../lib/util-ank.c:238
-++#, c-format
-++msgid "ip: %s is invalid inet prefix\n"
-++msgstr "ip: %s���切�Inetプレフィックス��\n"
-++
-++#: ../lib/util-ank.c:248
-++#, c-format
-++msgid "ip: %s is invalid IPv4 address\n"
-++msgstr "ip: %s���切�IPv4アドレス��.\n"
-++
-++#: ../lib/util-ank.c:256
-++#, c-format
-++msgid "ip: argument is wrong: %s\n"
-++msgstr "ip: 引数�間������: %s\n"
-++
-++#: ../ipmaddr.c:61
-++#, c-format
-++msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-++msgstr "使用法: ipmaddr [ add | del ] マル�キャストアドレス dev 文字列\n"
-++
-++#: ../ipmaddr.c:62
-++#, c-format
-++msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-++msgstr "        ipmaddr show [ dev 文字列 ] [ ipv4 | ipv6 | link | all ]\n"
-++
-++#: ../ipmaddr.c:63
-++#, c-format
-++msgid "       ipmaddr -V | -version\n"
-++msgstr "       ipmaddr -V | -version\n"
-++
-++#: ../ipmaddr.c:263
-++#, c-format
-++msgid "family %d "
-++msgstr "ファミリ %d "
-++
-++#: ../ipmaddr.c:272
-++#, c-format
-++msgid " users %d"
-++msgstr " ユーザ %d"
-++
-++#: ../ipmaddr.c:358
-++msgid "Cannot create socket"
-++msgstr "ソケットを作�����ん"
-++
-++#: ../slattach.c:180
-++#, c-format
-++msgid "slattach: /dev/%s already locked!\n"
-++msgstr "slattach: /dev/%s ����ロック�れ����!\n"
-++
-++#: ../slattach.c:186
-++#, c-format
-++msgid "slattach: tty_lock: (%s): %s\n"
-++msgstr "slattach: tty_lock: (%s): %s\n"
-++
-++#: ../slattach.c:192
-++#, c-format
-++msgid "slattach: cannot write PID file\n"
-++msgstr "slattach: PIDファイルを書�込���ん\n"
-++
-++#: ../slattach.c:202
-++#, c-format
-++msgid "slattach: tty_lock: UUCP user %s unknown!\n"
-++msgstr "slattach: tty_lock: UUCPユーザ%s��明��!\n"
-++
-++#: ../slattach.c:430
-++#, c-format
-++msgid "slattach: tty_hangup(DROP): %s\n"
-++msgstr "slattach: tty_hangup(DROP): %s\n"
-++
-++#: ../slattach.c:437
-++#, c-format
-++msgid "slattach: tty_hangup(RAISE): %s\n"
-++msgstr "slattach: tty_hangup(RAISE): %s\n"
-++
-++#: ../slattach.c:468
-++#, c-format
-++msgid "slattach: tty name too long\n"
-++msgstr "slattach: tty��長����\n"
-++
-++#: ../slattach.c:498
-++#, c-format
-++msgid "slattach: tty_open: cannot get current state!\n"
-++msgstr "slattach: tty_open: �在�状態を得られ��ん!\n"
-++
-++#: ../slattach.c:505
-++#, c-format
-++msgid "slattach: tty_open: cannot get current line disc!\n"
-++msgstr "slattach: tty_open: �在�ライン・ディスクを得られ��ん!\n"
-++
-++#: ../slattach.c:513
-++#, c-format
-++msgid "slattach: tty_open: cannot set RAW mode!\n"
-++msgstr "slattach: tty_open: RAWモードを設定����ん!\n"
-++
-++#: ../slattach.c:520
-++#, c-format
-++msgid "slattach: tty_open: cannot set %s bps!\n"
-++msgstr "slattach: tty_open: %s bpsを設定����ん!\n"
-++
-++#: ../slattach.c:530
-++#, c-format
-++msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-++msgstr "slattach: tty_open: 8N1モード�設定����ん!\n"
-++
-++#: ../slattach.c:672
-++#, c-format
-++msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++msgstr "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++
-++#: ../slattach.c:704
-++#, c-format
-++msgid "%s started"
-++msgstr "%sを開始����"
-++
-++#: ../slattach.c:705
-++#, c-format
-++msgid " on %s"
-++msgstr "(%s上)"
-++
-++#: ../slattach.c:706
-++#, c-format
-++msgid " interface %s\n"
-++msgstr " インタフェース %s\n"
-+Index: net-tools/po/fr.po
-+===================================================================
-+--- net-tools.orig/po/fr.po
-++++ net-tools/po/fr.po
-+@@ -4,281 +4,286 @@
-+ msgid ""
-+ msgstr ""
-+ "Project-Id-Version: net-tools 1.51\n"
-+-"POT-Creation-Date: 2000-02-14 02:31+0100\n"
-++"Report-Msgid-Bugs-To: \n"
-++"POT-Creation-Date: 2007-06-30 12:28+0900\n"
-+ "PO-Revision-Date: 1998-03-01 00:02+0100\n"
-+ "Last-Translator: J.M.Vansteene <vanstee@worldnet.fr>\n"
-+ "Language-Team:\n"
-+ "MIME-Version: 1.0\n"
-+-"Content-Type: text/plain; charset=iso8859-1\n"
-++"Content-Type: text/plain; charset=iso-8859-1\n"
-+ "Content-Transfer-Encoding: 8bit\n"
-+ 
-+-#: ../arp.c:110 ../arp.c:269
-++#: ../arp.c:112 ../arp.c:279
-++#, c-format
-+ msgid "arp: need host name\n"
-+ msgstr "arp: nécessite un nom d'hôte\n"
-+ 
-+-#: ../arp.c:207 ../arp.c:221
-++#: ../arp.c:215 ../arp.c:230
-+ #, c-format
-+ msgid "No ARP entry for %s\n"
-+ msgstr "Pas d'entrée ARP pour %s\n"
-+ 
-+-#: ../arp.c:239
-++#: ../arp.c:248
-+ #, fuzzy, c-format
-+ msgid "arp: cant get HW-Address for `%s': %s.\n"
-+ msgstr "rarp: ne peut définir l'entrée depuis %s:%u\n"
-+ 
-+-#: ../arp.c:243
-++#: ../arp.c:252
-++#, c-format
-+ msgid "arp: protocol type mismatch.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:252
-++#: ../arp.c:261
-+ #, c-format
-+ msgid "arp: device `%s' has HW address %s `%s'.\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:282
-++#: ../arp.c:293
-++#, c-format
-+ msgid "arp: need hardware address\n"
-+ msgstr "arp: nécessite une adresse matériel\n"
-+ 
-+-#: ../arp.c:290
-++#: ../arp.c:301
-++#, c-format
-+ msgid "arp: invalid hardware address\n"
-+ msgstr "arp: adresse matériel invalide\n"
-+ 
-+-#: ../arp.c:387
-++#: ../arp.c:398
-+ #, c-format
-+ msgid "arp: cannot open etherfile %s !\n"
-+ msgstr "arp: ne peut ouvrir le fichier ether %s !\n"
-+ 
-+-#: ../arp.c:403
-++#: ../arp.c:414
-+ #, c-format
-+ msgid "arp: format error on line %u of etherfile %s !\n"
-+ msgstr "arp: erreur de format ligne %u du fichier ether %s !\n"
-+ 
-+-#: ../arp.c:416
-++#: ../arp.c:427
-+ #, c-format
-+ msgid "arp: cannot set entry on line %u of etherfile %s !\n"
-+ msgstr "arp: ne peut définir l'entrée en ligne %u du fichier ether %s !\n"
-+ 
-+-#: ../arp.c:437
-+-msgid "Address\t\t\tHWtype\tHWaddress\t    Flags Mask\t\t  Iface\n"
-++#: ../arp.c:448
-++#, fuzzy, c-format
-++msgid ""
-++"Address                  HWtype  HWaddress           Flags Mask            "
-++"Iface\n"
-+ msgstr "Adresse\t\t\tTypeMap\tAdresseMat\t   Indicateurs\t\t  Iface\n"
-+ 
-+-#: ../arp.c:467
-++#: ../arp.c:476
-++#, fuzzy
-++msgid "<from_interface>"
-++msgstr "%s: interface inconnue: %s\n"
-++
-++#: ../arp.c:478
-+ msgid "(incomplete)"
-+ msgstr ""
-+ 
-+-#: ../arp.c:484
-++#: ../arp.c:495
-+ #, c-format
-+ msgid "%s (%s) at "
-+ msgstr ""
-+ 
-+-#: ../arp.c:490
-++#: ../arp.c:501
-++#, c-format
-+ msgid "<incomplete> "
-+ msgstr ""
-+ 
-+-#: ../arp.c:496
-++#: ../arp.c:507
-+ #, c-format
-+ msgid "netmask %s "
-+ msgstr ""
-+ 
-+-#: ../arp.c:513
-++#: ../arp.c:524
-+ #, c-format
-+ msgid "on %s\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:592
-++#: ../arp.c:605
-+ #, c-format
-+ msgid "Entries: %d\tSkipped: %d\tFound: %d\n"
-+ msgstr "Entrées: %d\tIgnorées: %d\tTrouvées: %d\n"
-+ 
-+-#: ../arp.c:596
-++#: ../arp.c:609
-+ #, c-format
-+ msgid "%s (%s) -- no entry\n"
-+ msgstr ""
-+ 
-+-#: ../arp.c:598
-++#: ../arp.c:611
-+ #, c-format
-+ msgid "arp: in %d entries no match found.\n"
-+ msgstr "arp: aucune correspondance trouvée dans %d entrées\n"
-+ 
-+-#: ../arp.c:613
-++#: ../arp.c:626
-++#, c-format
-+ msgid ""
-+ "Usage:\n"
-+ "  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP "
-+ "cache\n"
-+ msgstr ""
-+ "Syntaxe:\n"
-+-"  arp [-vn]  [<MAT>] [-i <if>] [-a] [<hôte>]              <-Affiche cache "
-+-"ARP\n"
-++"  arp [-vn]  [<MAT>] [-i <if>] [-a] [<hôte>]              <-Affiche cache ARP\n"
-+ 
-+-#: ../arp.c:614
-++#: ../arp.c:627
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP "
-++"  arp [-v]          [-i <if>] -d  <host> [pub]               <-Delete ARP "
-+ "entry\n"
-+-msgstr ""
-+-"  arp [-v]          [-i <if>] -d  <hôte> [pub][nopub]     <-Supprime entrée "
-+-"ARP\n"
-++msgstr "  arp [-v]          [-i <if>] -d  <hôte> [pub][nopub]     <-Supprime entrée ARP\n"
-+ 
-+-#: ../arp.c:615
-+-#, fuzzy
-++#: ../arp.c:628
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]              <-Add entry from "
-++"  arp [-vnD] [<HW>] [-i <if>] -f  [<filename>]            <-Add entry from "
-+ "file\n"
-+-msgstr ""
-+-"  arp [-vnD] [<MAT>] [-i <if>] -f  <fichier>              <-Ajout entrée "
-+-"depuis fichier\n"
-++msgstr "  arp [-vnD] [<MAT>] [-i <if>] -f  <fichier>              <-Ajout entrée depuis fichier\n"
-+ 
-+-#: ../arp.c:616
-++#: ../arp.c:629
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add "
-++"  arp [-v]   [<HW>] [-i <if>] -s  <host> <hwaddr> [temp]            <-Add "
-+ "entry\n"
-+-msgstr ""
-+-"  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [temp][nopub] <-Ajout "
-+-"entrée\n"
-++msgstr "  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [temp][nopub] <-Ajout entrée\n"
-+ 
-+-#: ../arp.c:617
-+-msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-msgstr ""
-+-"  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [netmask <nm>] pub  "
-+-"<-''-\n"
-+-
-+-#: ../arp.c:618
-++#: ../arp.c:630
-++#, fuzzy, c-format
-+ msgid ""
-+-"  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      "
-++"  arp [-v]   [<HW>] [-i <if>] -Ds <host> <if> [netmask <nm>] pub          "
-+ "<-''-\n"
-+ "\n"
-+ msgstr ""
-+-"  arp [-v]   [<MAT>] [-i <if>] -Ds <hôte> <if> [netmask <nm>] pub      "
-+-"<-''-\n"
-++"  arp [-v]   [<MAT>] [-i <if>] -Ds <hôte> <if> [netmask <nm>] pub      <-''-\n"
-+ "\n"
-+ 
-+-#: ../arp.c:620
-++#: ../arp.c:632
-++#, c-format
-+ msgid ""
-+ "        -a                       display (all) hosts in alternative (BSD) "
-+ "style\n"
-+-msgstr ""
-+-"        -a                       affiche (tous) les hôtes en style BSD\n"
-++msgstr "        -a                       affiche (tous) les hôtes en style BSD\n"
-+ 
-+-#: ../arp.c:621
-++#: ../arp.c:633
-++#, c-format
-+ msgid "        -s, --set                set a new ARP entry\n"
-+ msgstr "        -s, --set                définit une nouvelle entrée ARP\n"
-+ 
-+-#: ../arp.c:622
-++#: ../arp.c:634
-++#, c-format
-+ msgid "        -d, --delete             delete a specified entry\n"
-+ msgstr "        -d, --delete             supprime une entrée\n"
-+ 
-+-#: ../arp.c:623 ../netstat.c:1436 ../route.c:85
-++#: ../arp.c:635 ../netstat.c:1503 ../route.c:86
-++#, c-format
-+ msgid "        -v, --verbose            be verbose\n"
-+ msgstr "        -v, --verbose            mode verbeux\n"
-+ 
-+-#: ../arp.c:624 ../netstat.c:1437 ../route.c:86
-+-msgid "        -n, --numeric            dont resolve names\n"
-++#: ../arp.c:636 ../netstat.c:1504 ../route.c:87
-++#, fuzzy, c-format
-++msgid "        -n, --numeric            don't resolve names\n"
-+ msgstr "        -n, --numeric            ne résout pas les noms\n"
-+ 
-+-#: ../arp.c:625
-++#: ../arp.c:637
-++#, c-format
-+ msgid ""
-+ "        -i, --device             specify network interface (e.g. eth0)\n"
-+-msgstr ""
-+-"        -i, --device             spécifie l'interface réseau (p.ex. eth0)\n"
-++msgstr "        -i, --device             spécifie l'interface réseau (p.ex. eth0)\n"
-+ 
-+-#: ../arp.c:626
-++#: ../arp.c:638
-++#, c-format
-+ msgid "        -D, --use-device         read <hwaddr> from given device\n"
-+-msgstr ""
-+-"        -D, --use-device         lit l'<adrmat> depuis le périphérique\n"
-++msgstr "        -D, --use-device         lit l'<adrmat> depuis le périphérique\n"
-+ 
-+-#: ../arp.c:627
-+-#, fuzzy
-++#: ../arp.c:639
-++#, fuzzy, c-format
-+ msgid "        -A, -p, --protocol       specify protocol family\n"
-+ msgstr "        -r, --route              affiche la table de routage\n"
-+ 
-+-#: ../arp.c:628
-+-#, fuzzy
-++#: ../arp.c:640
-++#, fuzzy, c-format
-+ msgid ""
-+-"        -f, --file               read new entries from file or from "
-+-"/etc/ethers\n"
-++"        -f, --file               read new entries from file or from /etc/"
-++"ethers\n"
-+ "\n"
-+ msgstr ""
-+ "        -f, --file               lit les nouvelles entrées dans le fichier\n"
-+ "\n"
-+ 
-+-#: ../arp.c:630 ../rarp.c:181
-++#: ../arp.c:642 ../rarp.c:182
-+ #, c-format
-+ msgid "  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s\n"
-+-msgstr ""
-+-"  <HW>=Utilisez '-H <hw>' pour spécifier le type d'adresse matériel. Défaut: "
-+-"%s\n"
-++msgstr "  <HW>=Utilisez '-H <hw>' pour spécifier le type d'adresse matériel. Défaut: %s\n"
-+ 
-+-#: ../arp.c:631 ../rarp.c:182
-++#: ../arp.c:643 ../rarp.c:183
-++#, c-format
-+ msgid "  List of possible hardware types (which support ARP):\n"
-+ msgstr "  Liste les types de matériels supportant ARP:\n"
-+ 
-+-#: ../arp.c:664
-++#: ../arp.c:677 ../arp.c:762
-+ #, c-format
-+ msgid "%s: hardware type not supported!\n"
-+ msgstr "%s: type de matétiel non supporté !\n"
-+ 
-+-#: ../arp.c:668
-++#: ../arp.c:681
-+ #, c-format
-+ msgid "%s: address family not supported!\n"
-+ msgstr "%s: famille d'adresses non supportée !\n"
-+ 
-+-#: ../arp.c:703
-+-#, fuzzy
-++#: ../arp.c:716
-++#, fuzzy, c-format
-+ msgid "arp: -N not yet supported.\n"
-+ msgstr "Table de routage pour `ddp' pas encore supporté.\n"
-+ 
-+-#: ../arp.c:713
-++#: ../arp.c:726
-+ #, c-format
-+ msgid "arp: %s: unknown address family.\n"
-+ msgstr "arp: %s: famille d'adresses inconnue.\n"
-+ 
-+-#: ../arp.c:722
-++#: ../arp.c:735
-+ #, c-format
-+ msgid "arp: %s: unknown hardware type.\n"
-+ msgstr "arp: %s: type de matériel inconnu.\n"
-+ 
-+-#: ../arp.c:741
-++#: ../arp.c:754
-+ #, c-format
-+ msgid "arp: %s: kernel only supports 'inet'.\n"
-+ msgstr "arp: %s: le noyau ne supporte que 'inet'.\n"
-+ 
-+-#: ../arp.c:746
-++#: ../arp.c:767
-+ #, c-format
-+ msgid "arp: %s: hardware type without ARP support.\n"
-+ msgstr "arp: %s: type de matériel sans support ARP.\n"
-+ 
-+-#: ../hostname.c:69
-++#: ../hostname.c:71
-+ #, c-format
-+ msgid "Setting nodename to `%s'\n"
-+ msgstr "Définit le nom de noeud à `%s'\n"
-+ 
-+-#: ../hostname.c:74
-++#: ../hostname.c:76
-+ #, c-format
-+ msgid "%s: you must be root to change the node name\n"
-+ msgstr "%s: vous devez être root pour changer le nom de noeud\n"
-+ 
-+-#: ../hostname.c:77 ../hostname.c:97 ../hostname.c:116
-++#: ../hostname.c:79 ../hostname.c:99 ../hostname.c:117
-+ #, c-format
-+ msgid "%s: name too long\n"
-+ msgstr "%s: nom trop long\n"
-+ 
-+-#: ../hostname.c:89
-++#: ../hostname.c:91
-+ #, c-format
-+ msgid "Setting hostname to `%s'\n"
-+ msgstr "Définit le nom d'hôte à `%s'\n"
-+ 
-+-#: ../hostname.c:94
-++#: ../hostname.c:96
-+ #, c-format
-+ msgid "%s: you must be root to change the host name\n"
-+ msgstr "%s: vous devez être root pour changer le nom d'hôte\n"
-+ 
-+-#: ../hostname.c:108
-++#: ../hostname.c:109
-+ #, c-format
-+ msgid "Setting domainname to `%s'\n"
-+ msgstr "Définit le nom de domaine à `%s'\n"
-+ 
-+-#: ../hostname.c:113
-++#: ../hostname.c:114
-+ #, c-format
-+ msgid "%s: you must be root to change the domain name\n"
-+ msgstr "%s: vous devez être root pour changer le nom de domaine\n"
-+@@ -303,38 +308,36 @@ msgstr "Résultat : h_aliases=`%s'\n"
-+ msgid "Result: h_addr_list=`%s'\n"
-+ msgstr "Résultat : h_addr_list=`%s'\n"
-+ 
-+-#: ../hostname.c:209
-++#: ../hostname.c:208
-+ #, c-format
-+ msgid "%s: can't open `%s'\n"
-+ msgstr "%s: ne peut ouvrir `%s'\n"
-+ 
-+-#: ../hostname.c:223
-++#: ../hostname.c:222
-++#, c-format
-+ msgid "Usage: hostname [-v] {hostname|-F file}      set hostname (from file)\n"
-+-msgstr ""
-+-"Syntaxe : hostname [-v] {hôte|-F fichier}      définit le nom d'hôte (depuis "
-+-"le fichier)\n"
-++msgstr "Syntaxe : hostname [-v] {hôte|-F fichier}      définit le nom d'hôte (depuis le fichier)\n"
-+ 
-+-#: ../hostname.c:224
-++#: ../hostname.c:223
-++#, c-format
-+ msgid ""
-+ "       domainname [-v] {nisdomain|-F file}   set NIS domainname (from file)\n"
-+-msgstr ""
-+-"       domainname [-v] {domaine_nis|-F fichier}   définit le domaine NIS "
-+-"(depuis le fichier)\n"
-++msgstr "       domainname [-v] {domaine_nis|-F fichier}   définit le domaine NIS (depuis le fichier)\n"
-+ 
-+-#: ../hostname.c:226
-+-#, fuzzy
-++#: ../hostname.c:225
-++#, fuzzy, c-format
-+ msgid ""
-+ "       nodename [-v] {nodename|-F file}      set DECnet node name (from "
-+ "file)\n"
-+-msgstr ""
-+-"       nodename [-v] {nom_noeud|-F fichier}      Définit le nom de noeud "
-+-"DECnet (depuis le fichier)\n"
-++msgstr "       nodename [-v] {nom_noeud|-F fichier}      Définit le nom de noeud DECnet (depuis le fichier)\n"
-+ 
-+-#: ../hostname.c:228
-++#: ../hostname.c:227
-++#, c-format
-+ msgid "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  display formatted name\n"
-+ msgstr "       hostname [-v] [-d|-f|-s|-a|-i|-y|-n]  affiche le nom formatté\n"
-+ 
-+-#: ../hostname.c:229
-++#: ../hostname.c:228
-++#, c-format
-+ msgid ""
-+ "       hostname [-v]                         display hostname\n"
-+ "\n"
-+@@ -342,7 +345,8 @@ msgstr ""
-+ "       hostname [-v]                         affiche le nom d'hôte\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:230
-++#: ../hostname.c:229
-++#, c-format
-+ msgid ""
-+ "       hostname -V|--version|-h|--help       print info and exit\n"
-+ "\n"
-+@@ -350,7 +354,8 @@ msgstr ""
-+ "       hostname -V|--version|-h|--help       affiche des infos et termine\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:231
-++#: ../hostname.c:230
-++#, c-format
-+ msgid ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+@@ -358,45 +363,52 @@ msgstr ""
-+ "    dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:232
-++#: ../hostname.c:231
-++#, c-format
-+ msgid "    -s, --short           short host name\n"
-+ msgstr "    -s, --short           nom d'hôte court\n"
-+ 
-+-#: ../hostname.c:233
-++#: ../hostname.c:232
-++#, c-format
-+ msgid "    -a, --alias           alias names\n"
-+ msgstr "    -a, --alias           noms d'alias\n"
-+ 
-+-#: ../hostname.c:234
-++#: ../hostname.c:233
-++#, c-format
-+ msgid "    -i, --ip-address      addresses for the hostname\n"
-+ msgstr "    -i, --ip-address      adresses de l'hôte\n"
-+ 
-+-#: ../hostname.c:235
-++#: ../hostname.c:234
-++#, c-format
-+ msgid "    -f, --fqdn, --long    long host name (FQDN)\n"
-+ msgstr "    -f, --fqdn, --long    nom d'hôte long (FQDN)\n"
-+ 
-+-#: ../hostname.c:236
-++#: ../hostname.c:235
-++#, c-format
-+ msgid "    -d, --domain          DNS domain name\n"
-+ msgstr "    -d, --domain          nom de domaine DNS\n"
-+ 
-+-#: ../hostname.c:237
-++#: ../hostname.c:236
-++#, c-format
-+ msgid "    -y, --yp, --nis       NIS/YP domainname\n"
-+ msgstr "    -y, --yp, --nis       nom de domaine NIS/YP\n"
-+ 
-+-#: ../hostname.c:239
-++#: ../hostname.c:238
-++#, c-format
-+ msgid "    -n, --node            DECnet node name\n"
-+ msgstr "    -n, --node            nom de noeud DECnet\n"
-+ 
-+-#: ../hostname.c:241
-+-#, fuzzy
-++#: ../hostname.c:240
-++#, fuzzy, c-format
-+ msgid ""
-+ "    -F, --file            read hostname or NIS domainname from given file\n"
-+ "\n"
-+ msgstr ""
-+-"    -F, --file            lit le nom d'hôte ou le nom de domaine NIS depuis "
-+-"le fichier\n"
-++"    -F, --file            lit le nom d'hôte ou le nom de domaine NIS depuis le fichier\n"
-+ "\n"
-+ 
-+-#: ../hostname.c:243
-++#: ../hostname.c:242
-++#, c-format
-+ msgid ""
-+ "   This command can read or set the hostname or the NIS domainname. You can\n"
-+ "   also read the DNS domain or the FQDN (fully qualified domain name).\n"
-+@@ -411,15 +423,16 @@ msgid "%s: You can't change the DNS doma
-+ msgstr "%s: Vous ne pouvez changer le nom de domaine DNS avec cette commande\n"
-+ 
-+ #: ../hostname.c:339
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Unless you are using bind or NIS for host lookups you can change the DNS\n"
-+ msgstr ""
-+ "\n"
-+-"Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez "
-+-"changer le\n"
-++"Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez changer le\n"
-+ 
-+ #: ../hostname.c:340
-++#, c-format
-+ msgid "domain name (which is part of the FQDN) in the /etc/hosts file.\n"
-+ msgstr ""
-+ "nom de domaine DNS (qui fait partie du FQDN) dans le fichier /etc/hosts.\n"
-+@@ -439,554 +452,453 @@ msgstr "getdomainname()=`%s'\n"
-+ msgid "getnodename()=`%s'\n"
-+ msgstr "getnodename()=`%s'\n"
-+ 
-+-#: ../ifconfig.c:159
-+-#, c-format
-+-msgid "%-9.9s Link encap:%s  "
-+-msgstr "%-9.9s Lien encap:%s  "
-++#: ../ifconfig.c:107
-++#, fuzzy, c-format
-++msgid ""
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR "
-++"Flg\n"
-++msgstr ""
-++"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Indic\n"
-+ 
-+-#: ../ifconfig.c:164
-+-#, c-format
-+-msgid "HWaddr %s  "
-+-msgstr "HWaddr %s  "
-++#: ../ifconfig.c:129 ../ifconfig.c:161
-++#, fuzzy, c-format
-++msgid "%s: ERROR while getting interface flags: %s\n"
-++msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
-+ 
-+-#: ../ifconfig.c:167
-++#: ../ifconfig.c:153 ../ifconfig.c:185 ../ifconfig.c:771 ../ifconfig.c:862
-++#: ../ifconfig.c:973
-+ #, c-format
-+-msgid "Media:%s"
-+-msgstr "Media:%s"
-++msgid "No support for INET on this system.\n"
-++msgstr "Pas de support de INET sur ce système.\n"
-+ 
-+-#: ../ifconfig.c:169
-+-msgid "(auto)"
-+-msgstr "(auto)"
-++#: ../ifconfig.c:193
-++#, fuzzy, c-format
-++msgid "%s: ERROR while testing interface flags: %s\n"
-++msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
-+ 
-+-#: ../ifconfig.c:176
-+-#, c-format
-+-msgid "          %s addr:%s "
-+-msgstr "          %s adr:%s "
-++#: ../ifconfig.c:202
-++#, fuzzy, c-format
-++msgid ""
-++"Usage:\n"
-++"  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]\n"
-++msgstr ""
-++"Syntaxe:\n"
-++"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <adresse>]\n"
-+ 
-+-#: ../ifconfig.c:179
-++#: ../ifconfig.c:204
-+ #, c-format
-+-msgid " P-t-P:%s "
-+-msgstr " P-t-P:%s "
-++msgid "  [add <address>[/<prefixlen>]]\n"
-++msgstr "  [add <adresse>[/<lg_prefixe>]]\n"
-+ 
-+-#: ../ifconfig.c:182
-++#: ../ifconfig.c:205
-+ #, c-format
-+-msgid " Bcast:%s "
-+-msgstr " Bcast:%s "
-++msgid "  [del <address>[/<prefixlen>]]\n"
-++msgstr "  [del <adresse>[/<lg_prefixe>]]\n"
-+ 
-+-#: ../ifconfig.c:184
-++#: ../ifconfig.c:206
-+ #, c-format
-+-msgid " Mask:%s\n"
-+-msgstr " Masque:%s\n"
-++msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-++msgstr "  [[-]broadcast [<adresse>]]  [[-]pointopoint [<adresse>]]\n"
-+ 
-+-#: ../ifconfig.c:201
-+-#, c-format
-+-msgid "          inet6 addr: %s/%d"
-+-msgstr "          adr inet6: %s/%d"
-++#: ../ifconfig.c:207
-++#, fuzzy, c-format
-++msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-++msgstr "  [netmask <adresse>]  [dstaddr <adresse>]  [tunnel <adresse>]\n"
-+ 
-+-#: ../ifconfig.c:203
-+-msgid " Scope:"
-+-msgstr " Scope:"
-++#: ../ifconfig.c:210
-++#, c-format
-++msgid "  [outfill <NN>] [keepalive <NN>]\n"
-++msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+ 
-+-#: ../ifconfig.c:206
-+-msgid "Global"
-+-msgstr "Global"
-++#: ../ifconfig.c:212
-++#, c-format
-++msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-++msgstr "  [hw <HW> <adresse>]  [metric <NN>]  [mtu <NN>]\n"
-+ 
-+-#: ../ifconfig.c:209
-+-msgid "Link"
-+-msgstr "Lien"
-++#: ../ifconfig.c:213
-++#, c-format
-++msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-++msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+ 
-+-#: ../ifconfig.c:212
-+-msgid "Site"
-+-msgstr "Site"
-++#: ../ifconfig.c:214
-++#, c-format
-++msgid "  [multicast]  [[-]promisc]\n"
-++msgstr "  [multicast]  [[-]promisc]\n"
-+ 
-+ #: ../ifconfig.c:215
-+-msgid "Compat"
-+-msgstr "Compat"
-++#, c-format
-++msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-++msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+ 
-+-#: ../ifconfig.c:218
-+-msgid "Host"
-+-msgstr "Hôte"
-++#: ../ifconfig.c:217
-++#, fuzzy, c-format
-++msgid "  [txqueuelen <NN>]\n"
-++msgstr "  [txqueuelen longueur]\n"
-+ 
-+-#: ../ifconfig.c:221
-+-msgid "Unknown"
-+-msgstr "Inconnu"
-++#: ../ifconfig.c:220
-++#, c-format
-++msgid "  [[-]dynamic]\n"
-++msgstr "  [[-]dynamic]\n"
-+ 
-+-#: ../ifconfig.c:236
-++#: ../ifconfig.c:222
-+ #, c-format
-+-msgid "          IPX/Ethernet II addr:%s\n"
-+-msgstr "          adr IPX/Ethernet II:%s\n"
-++msgid ""
-++"  [up|down] ...\n"
-++"\n"
-++msgstr ""
-++"  [up|down] ...\n"
-++"\n"
-+ 
-+-#: ../ifconfig.c:239
-++#: ../ifconfig.c:224
-+ #, c-format
-+-msgid "          IPX/Ethernet SNAP addr:%s\n"
-+-msgstr "          adr IPX/Ethernet SNAP:%s\n"
-++msgid "  <HW>=Hardware Type.\n"
-++msgstr "  <HW>=Type de matériel.\n"
-+ 
-+-#: ../ifconfig.c:242
-++#: ../ifconfig.c:225
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.2 addr:%s\n"
-+-msgstr "          adr IPX/Ethernet 802.2:%s\n"
-++msgid "  List of possible hardware types:\n"
-++msgstr "  Liste des types de matériels possibles:\n"
-+ 
-+-#: ../ifconfig.c:245
-++#. 1 = ARPable
-++#: ../ifconfig.c:227
-+ #, c-format
-+-msgid "          IPX/Ethernet 802.3 addr:%s\n"
-+-msgstr "          adr IPX/Ethernet 802.3:%s\n"
-++msgid "  <AF>=Address family. Default: %s\n"
-++msgstr "  <AF>=famille d'Adresses. Défaut: %s\n"
-+ 
-+-#: ../ifconfig.c:255
-++#: ../ifconfig.c:228
-+ #, c-format
-+-msgid "          EtherTalk Phase 2 addr:%s\n"
-+-msgstr "          adr EtherTalk Phase 2:%s\n"
-++msgid "  List of possible address families:\n"
-++msgstr "  Liste des familles d'adresses possibles:\n"
-+ 
-+-#: ../ifconfig.c:264
-++#: ../ifconfig.c:303
-+ #, c-format
-+-msgid "          econet addr:%s\n"
-+-msgstr "          adr econet:%s\n"
-++msgid "ifconfig: option `%s' not recognised.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:270
-+-msgid "[NO FLAGS] "
-+-msgstr "[PAS INDICATEURS] "
-++#: ../ifconfig.c:305 ../ifconfig.c:962
-++#, c-format
-++msgid "ifconfig: `--help' gives usage information.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:272
-+-msgid "UP "
-+-msgstr "UP "
-++#: ../ifconfig.c:380
-++#, c-format
-++msgid "Unknown media type.\n"
-++msgstr "Type de média inconnu.\n"
-+ 
-+-#: ../ifconfig.c:274
-+-msgid "BROADCAST "
-+-msgstr "BROADCAST "
-++#: ../ifconfig.c:417
-++#, c-format
-++msgid ""
-++"Warning: Interface %s still in promisc mode... maybe other application is "
-++"running?\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:276
-+-msgid "DEBUG "
-+-msgstr "DEBUG "
-++#: ../ifconfig.c:429
-++#, c-format
-++msgid "Warning: Interface %s still in MULTICAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:278
-+-msgid "LOOPBACK "
-+-msgstr "LOOPBACK "
-++#: ../ifconfig.c:441
-++#, c-format
-++msgid "Warning: Interface %s still in ALLMULTI mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:280
-+-msgid "POINTOPOINT "
-+-msgstr "POINTOPOINT "
-++#: ../ifconfig.c:465
-++#, c-format
-++msgid "Warning: Interface %s still in DYNAMIC mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:282
-+-msgid "NOTRAILERS "
-+-msgstr "NOTRAILERS "
-++#: ../ifconfig.c:523
-++#, c-format
-++msgid "Warning: Interface %s still in BROADCAST mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:284
-+-msgid "RUNNING "
-+-msgstr "RUNNING "
-++#: ../ifconfig.c:652
-++#, c-format
-++msgid "Warning: Interface %s still in POINTOPOINT mode.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:286
-+-msgid "NOARP "
-+-msgstr "NOARP "
-++#: ../ifconfig.c:684
-++#, c-format
-++msgid "hw address type `%s' has no handler to set address. failed.\n"
-++msgstr ""
-+ 
-+-#: ../ifconfig.c:288
-+-msgid "PROMISC "
-+-msgstr "PROMISC "
-++#: ../ifconfig.c:693
-++#, c-format
-++msgid "%s: invalid %s address.\n"
-++msgstr "%s: adresse %s invalide.\n"
-+ 
-+-#: ../ifconfig.c:290
-+-msgid "ALLMULTI "
-+-msgstr "ALLMULTI "
-+-
-+-#: ../ifconfig.c:292
-+-msgid "SLAVE "
-+-msgstr "SLAVE "
-+-
-+-#: ../ifconfig.c:294
-+-msgid "MASTER "
-+-msgstr "MASTER "
-+-
-+-#: ../ifconfig.c:296
-+-msgid "MULTICAST "
-+-msgstr "MULTICAST "
-+-
-+-#: ../ifconfig.c:299
-+-msgid "DYNAMIC "
-+-msgstr "DYNAMIC "
-+-
-+-#: ../ifconfig.c:302
-+-#, c-format
-+-msgid " MTU:%d  Metric:%d"
-+-msgstr " MTU:%d  Metric:%d"
-+-
-+-#: ../ifconfig.c:306
-+-#, c-format
-+-msgid "  Outfill:%d  Keepalive:%d"
-+-msgstr "  Outfill:%d  Keepalive:%d"
-+-
-+-#: ../ifconfig.c:320
-+-#, c-format
-+-msgid "RX packets:%lu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-+-msgstr "Paquets Reçus:%lu erreurs:%lu jetés:%lu débordements:%lu trames:%lu\n"
-+-
-+-#: ../ifconfig.c:325
-+-#, c-format
-+-msgid "             compressed:%lu\n"
-+-msgstr "             compressés:%lu\n"
-+-
-+-#: ../ifconfig.c:329
-+-#, c-format
-+-msgid "TX packets:%lu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-+-msgstr ""
-+-"Paquets transmis:%lu erreurs:%lu jetés:%lu débordements:%lu carrier:%lu\n"
-+-
-+-#: ../ifconfig.c:333
-++#: ../ifconfig.c:737 ../ifconfig.c:827 ../ifconfig.c:913
-+ #, c-format
-+-msgid "          collisions:%lu "
-+-msgstr "          collisions:%lu "
-+-
-+-#: ../ifconfig.c:335
-+-#, c-format
-+-msgid "compressed:%lu "
-+-msgstr "compressés:%lu "
-+-
-+-#: ../ifconfig.c:337
-+-#, c-format
-+-msgid "txqueuelen:%d "
-+-msgstr "lg file transmission:%d "
-+-
-+-#: ../ifconfig.c:345
-+-#, c-format
-+-msgid "Interrupt:%d "
-+-msgstr "Interruption:%d "
-+-
-+-#. Only print devices using it for
-+-#. I/O maps
-+-#: ../ifconfig.c:348
-+-#, c-format
-+-msgid "Base address:0x%x "
-+-msgstr "Adresse de base:0x%x "
-+-
-+-#: ../ifconfig.c:350
-+-#, c-format
-+-msgid "Memory:%lx-%lx "
-+-msgstr "Mémoire:%lx-%lx "
-+-
-+-#: ../ifconfig.c:353
-+-#, c-format
-+-msgid "DMA chan:%x "
-+-msgstr "Canal DMA:%x "
-++msgid "No support for INET6 on this system.\n"
-++msgstr "Pas de support de INET6 sur ce système.\n"
-+ 
-+-#: ../ifconfig.c:384 ../ifconfig.c:405
-++#: ../ifconfig.c:780 ../ifconfig.c:871
-+ #, c-format
-+-msgid "%s: unknown interface: %s\n"
-+-msgstr "%s: interface inconnue: %s\n"
-+-
-+-#: ../ifconfig.c:421
-+-msgid ""
-+-"Usage:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <address>]\n"
-+-msgstr ""
-+-"Syntaxe:\n"
-+-"  ifconfig [-a] [-i] [-v] <interface> [[<AF>] <adresse>]\n"
-+-
-+-#: ../ifconfig.c:425
-+-msgid "  [add <address>[/<prefixlen>]]\n"
-+-msgstr "  [add <adresse>[/<lg_prefixe>]]\n"
-+-
-+-#: ../ifconfig.c:427
-+-msgid "  [del <address>[/<prefixlen>]]\n"
-+-msgstr "  [del <adresse>[/<lg_prefixe>]]\n"
-+-
-+-#: ../ifconfig.c:432
-+-msgid "  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n"
-+-msgstr "  [[-]broadcast [<adresse>]]  [[-]pointopoint [<adresse>]]\n"
-+-
-+-#: ../ifconfig.c:433
-+-#, fuzzy
-+-msgid "  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]\n"
-+-msgstr "  [netmask <adresse>]  [dstaddr <adresse>]  [tunnel <adresse>]\n"
-+-
-+-#: ../ifconfig.c:436
-+-msgid "  [outfill <NN>] [keepalive <NN>]\n"
-+-msgstr "  [outfill <NN>] [keepalive <NN>]\n"
-+-
-+-#: ../ifconfig.c:438
-+-msgid "  [hw <HW> <address>]  [metric <NN>]  [mtu <NN>]\n"
-+-msgstr "  [hw <HW> <adresse>]  [metric <NN>]  [mtu <NN>]\n"
-+-
-+-#: ../ifconfig.c:439
-+-msgid "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-msgstr "  [[-]trailers]  [[-]arp]  [[-]allmulti]\n"
-+-
-+-#: ../ifconfig.c:440
-+-msgid "  [multicast]  [[-]promisc]\n"
-+-msgstr "  [multicast]  [[-]promisc]\n"
-+-
-+-#: ../ifconfig.c:441
-+-msgid "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+-msgstr "  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]\n"
-+-
-+-#: ../ifconfig.c:443
-+-#, fuzzy
-+-msgid "  [txqueuelen <NN>]\n"
-+-msgstr "  [txqueuelen longueur]\n"
-+-
-+-#: ../ifconfig.c:446
-+-msgid "  [[-]dynamic]\n"
-+-msgstr "  [[-]dynamic]\n"
-+-
-+-#: ../ifconfig.c:448
-+-msgid ""
-+-"  [up|down] ...\n"
-+-"\n"
-++msgid "Interface %s not initialized\n"
-+ msgstr ""
-+-"  [up|down] ...\n"
-+-"\n"
-+-
-+-#: ../ifconfig.c:450
-+-msgid "  <HW>=Hardware Type.\n"
-+-msgstr "  <HW>=Type de matériel.\n"
-+-
-+-#: ../ifconfig.c:451
-+-msgid "  List of possible hardware types:\n"
-+-msgstr "  Liste des types de matériels possibles:\n"
-+-
-+-#. 1 = ARPable
-+-#: ../ifconfig.c:453
-+-#, c-format
-+-msgid "  <AF>=Address family. Default: %s\n"
-+-msgstr "  <AF>=famille d'Adresses. Défaut: %s\n"
-+-
-+-#: ../ifconfig.c:454
-+-msgid "  List of possible address families:\n"
-+-msgstr "  Liste des familles d'adresses possibles:\n"
-+-
-+-#: ../ifconfig.c:593
-+-msgid "Unknown media type.\n"
-+-msgstr "Type de média inconnu.\n"
-+ 
-+-#: ../ifconfig.c:881
-+-#, c-format
-+-msgid "%s: invalid %s address.\n"
-++#: ../ifconfig.c:792 ../ifconfig.c:882
-++#, fuzzy, c-format
-++msgid "Bad address.\n"
-+ msgstr "%s: adresse %s invalide.\n"
-+ 
-+-#: ../ifconfig.c:920 ../ifconfig.c:963 ../ifconfig.c:1011
-+-msgid "No support for INET6 on this system.\n"
-+-msgstr "Pas de support de INET6 sur ce système.\n"
-+-
-+-#: ../ifconfig.c:983
-++#: ../ifconfig.c:885
-++#, c-format
-+ msgid "Address deletion not supported on this system.\n"
-+ msgstr "Suppression d'adresses pas supporté par ce système.\n"
-+ 
-+-#: ../ifconfig.c:1066
-+-msgid "No support for INET on this system.\n"
-+-msgstr "Pas de support de INET sur ce système.\n"
-++#: ../ifconfig.c:957
-++#, fuzzy, c-format
-++msgid "ifconfig: Cannot set address for this protocol family.\n"
-++msgstr "Ne sait pas comment définir les adresses pour la famille %d.\n"
-+ 
-+-#: ../ifconfig.c:1076
-++#: ../ifconfig.c:983
-++#, c-format
-+ msgid "No support for ECONET on this system.\n"
-+ msgstr "Pas de support de ECONET sur ce système.\n"
-+ 
-+-#: ../ifconfig.c:1084
-++#: ../ifconfig.c:991
-+ #, c-format
-+ msgid "Don't know how to set addresses for family %d.\n"
-+ msgstr "Ne sait pas comment définir les adresses pour la famille %d.\n"
-+ 
-+-#: ../netstat.c:383
-++#: ../ifconfig.c:1021
-++#, c-format
-++msgid "WARNING: at least one error occured. (%d)\n"
-++msgstr ""
-++
-++#: ../netstat.c:434
-+ #, c-format
-+ msgid ""
-+ "(No info could be read for \"-p\": geteuid()=%d but you should be root.)\n"
-+-msgstr ""
-+-"(Pas d'infos lues pour \"-p\": geteuid()=%d mais vous devez être root.)\n"
-++msgstr "(Pas d'infos lues pour \"-p\": geteuid()=%d mais vous devez être root.)\n"
-+ 
-+-#: ../netstat.c:387
-++#: ../netstat.c:438
-++#, c-format
-+ msgid ""
-+ "(Not all processes could be identified, non-owned process info\n"
-+ " will not be shown, you would have to be root to see it all.)\n"
-+ msgstr ""
-+ "(Tous les processus ne peuvent être identifiés, les infos sur les processus\n"
-+-"non possédés ne seront pas affichées, vous devez être root pour les voir "
-+-"toutes.)\n"
-++"non possédés ne seront pas affichées, vous devez être root pour les voir toutes.)\n"
-+ 
-+-#: ../netstat.c:394 ../netstat.c:1089 ../netstat.c:1166
-++#: ../netstat.c:445 ../netstat.c:1189 ../netstat.c:1266
-+ msgid "LISTENING"
-+ msgstr "LISTENING"
-+ 
-+-#: ../netstat.c:395
-++#: ../netstat.c:446
-+ msgid "CONN SENT"
-+ msgstr "CONN SENT"
-+ 
-+-#: ../netstat.c:396 ../netstat.c:1168
-++#: ../netstat.c:447 ../netstat.c:1268
-+ msgid "DISC SENT"
-+ msgstr "DISC SENT"
-+ 
-+-#: ../netstat.c:397 ../netstat.c:464 ../netstat.c:809 ../netstat.c:1169
-++#: ../netstat.c:448 ../netstat.c:515 ../netstat.c:904 ../netstat.c:1269
-+ msgid "ESTABLISHED"
-+ msgstr "ESTABLISHED"
-+ 
-+-#: ../netstat.c:419
-++#: ../netstat.c:470
-++#, c-format
-+ msgid "Active NET/ROM sockets\n"
-+ msgstr "sockets NET/ROM actives\n"
-+ 
-+-#: ../netstat.c:420
-++#: ../netstat.c:471
-++#, c-format
-+ msgid ""
-+-"User       Dest       Source     Device  State        Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"User       Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-+ msgstr ""
-+-"Utilisatr  Dest       Source     Periph  Etat         Vr/Vs    Send-Q  "
-+-"Recv-Q\n"
-++"Utilisatr  Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-"
-++"Q\n"
-+ 
-+-#: ../netstat.c:430 ../netstat.c:1208
-++#: ../netstat.c:481 ../netstat.c:1308
-+ #, c-format
-+ msgid "Problem reading data from %s\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:465
-++#: ../netstat.c:516
-+ msgid "SYN_SENT"
-+ msgstr "SYN_SENT"
-+ 
-+-#: ../netstat.c:466
-++#: ../netstat.c:517
-+ msgid "SYN_RECV"
-+ msgstr "SYN_RECV"
-+ 
-+-#: ../netstat.c:467
-++#: ../netstat.c:518
-+ msgid "FIN_WAIT1"
-+ msgstr "FIN_WAIT1"
-+ 
-+-#: ../netstat.c:468
-++#: ../netstat.c:519
-+ msgid "FIN_WAIT2"
-+ msgstr "FIN_WAIT2"
-+ 
-+-#: ../netstat.c:469
-++#: ../netstat.c:520
-+ msgid "TIME_WAIT"
-+ msgstr "TIME_WAIT"
-+ 
-+-#: ../netstat.c:470
-++#: ../netstat.c:521
-+ msgid "CLOSE"
-+ msgstr "CLOSE"
-+ 
-+-#: ../netstat.c:471
-++#: ../netstat.c:522
-+ msgid "CLOSE_WAIT"
-+ msgstr "CLOSE_WAIT"
-+ 
-+-#: ../netstat.c:472
-++#: ../netstat.c:523
-+ msgid "LAST_ACK"
-+ msgstr "LAST_ACK"
-+ 
-+-#: ../netstat.c:473
-++#: ../netstat.c:524
-+ msgid "LISTEN"
-+ msgstr "LISTEN"
-+ 
-+-#: ../netstat.c:474
-++#: ../netstat.c:525
-+ msgid "CLOSING"
-+ msgstr "CLOSING"
-+ 
-+-#: ../netstat.c:544
-++#: ../netstat.c:596
-+ #, c-format
-+ msgid "warning, got bogus igmp6 line %d.\n"
-+ msgstr "attention, ligne igmp6 en erreur %d.\n"
-+ 
-+-#: ../netstat.c:549 ../netstat.c:587 ../netstat.c:670 ../netstat.c:803
-+-#: ../netstat.c:935 ../netstat.c:940
-++#: ../netstat.c:601 ../netstat.c:639 ../netstat.c:763 ../netstat.c:898
-++#: ../netstat.c:1032 ../netstat.c:1037
-+ #, c-format
-+ msgid "netstat: unsupported address family %d !\n"
-+ msgstr "netstat: famille d'adresses pas supportée %d !\n"
-+ 
-+-#: ../netstat.c:562 ../netstat.c:567 ../netstat.c:575 ../netstat.c:582
-++#: ../netstat.c:614 ../netstat.c:619 ../netstat.c:627 ../netstat.c:634
-+ #, c-format
-+ msgid "warning, got bogus igmp line %d.\n"
-+ msgstr "attention, ligne igmp6 en erreur %d.\n"
-+ 
-+-#: ../netstat.c:666
-++#: ../netstat.c:677
-++#, fuzzy, c-format
-++msgid "Active X.25 sockets\n"
-++msgstr "Sockets AX.25 actives\n"
-++
-++#. IMHO, Vr/Vs is not very usefull --SF
-++#: ../netstat.c:679
-++#, fuzzy, c-format
-++msgid ""
-++"Dest         Source          Device  LCI  State        Vr/Vs  Send-Q  Recv-"
-++"Q\n"
-++msgstr "Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-Q\n"
-++
-++#: ../netstat.c:759
-++#, c-format
-+ msgid "warning, got bogus tcp line.\n"
-+ msgstr "attention, ligne tcp en erreur.\n"
-+ 
-+-#: ../netstat.c:704 ../netstat.c:855 ../netstat.c:975
-++#: ../netstat.c:800 ../netstat.c:953 ../netstat.c:1075
-+ #, c-format
-+ msgid "off (0.00/%ld/%d)"
-+ msgstr "off (0.00/%ld/%d)"
-+ 
-+-#: ../netstat.c:708
-++#: ../netstat.c:804
-+ #, fuzzy, c-format
-+ msgid "on (%2.2f/%ld/%d)"
-+ msgstr "on%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:713
-++#: ../netstat.c:809
-+ #, fuzzy, c-format
-+ msgid "keepalive (%2.2f/%ld/%d)"
-+ msgstr "on%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:718
-++#: ../netstat.c:814
-+ #, fuzzy, c-format
-+ msgid "timewait (%2.2f/%ld/%d)"
-+ msgstr "on%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:723 ../netstat.c:864 ../netstat.c:985
-++#: ../netstat.c:819 ../netstat.c:962 ../netstat.c:1085
-+ #, c-format
-+ msgid "unkn-%d (%2.2f/%ld/%d)"
-+ msgstr "unkn-%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:799
-++#: ../netstat.c:894
-++#, c-format
-+ msgid "warning, got bogus udp line.\n"
-+ msgstr "attention, ligne udp en erreur.\n"
-+ 
-+-#: ../netstat.c:817 ../netstat.c:1075 ../netstat.c:1108
-++#: ../netstat.c:912 ../netstat.c:1175 ../netstat.c:1208
-+ msgid "UNKNOWN"
-+ msgstr "INCONNU"
-+ 
-+-#: ../netstat.c:860 ../netstat.c:980
-++#: ../netstat.c:958 ../netstat.c:1080
-+ #, c-format
-+ msgid "on%d (%2.2f/%ld/%d)"
-+ msgstr "on%d (%2.2f/%ld/%d)"
-+ 
-+-#: ../netstat.c:949
-++#: ../netstat.c:1046
-++#, c-format
-+ msgid "warning, got bogus raw line.\n"
-+ msgstr "attention, ligne raw en erreur.\n"
-+ 
-+-#: ../netstat.c:1028
-++#: ../netstat.c:1128
-++#, c-format
-+ msgid "warning, got bogus unix line.\n"
-+ msgstr "attention, ligne unix en erreur.\n"
-+ 
-+-#: ../netstat.c:1055
-++#: ../netstat.c:1155
-+ msgid "STREAM"
-+ msgstr "STREAM"
-+ 
-+-#: ../netstat.c:1059
-++#: ../netstat.c:1159
-+ msgid "DGRAM"
-+ msgstr "DGRAM"
-+ 
-+-#: ../netstat.c:1063
-++#: ../netstat.c:1163
-+ msgid "RAW"
-+ msgstr "RAW"
-+ 
-+-#: ../netstat.c:1067
-++#: ../netstat.c:1167
-+ msgid "RDM"
-+ msgstr "RDM"
-+ 
-+-#: ../netstat.c:1071
-++#: ../netstat.c:1171
-+ msgid "SEQPACKET"
-+ msgstr "SEQPACKET"
-+ 
-+-#: ../netstat.c:1080
-++#: ../netstat.c:1180
-+ msgid "FREE"
-+ msgstr "LIBRE"
-+ 
-+-#: ../netstat.c:1096
-++#: ../netstat.c:1196
-+ msgid "CONNECTING"
-+ msgstr "ENCONNEXION"
-+ 
-+-#: ../netstat.c:1100
-++#: ../netstat.c:1200
-+ msgid "CONNECTED"
-+ msgstr "CONNECTE"
-+ 
-+-#: ../netstat.c:1104
-++#: ../netstat.c:1204
-+ msgid "DISCONNECTING"
-+ msgstr "ENDECONNEXION"
-+ 
-+-#: ../netstat.c:1135
-++#: ../netstat.c:1235
-++#, c-format
-+ msgid "Active UNIX domain sockets "
-+ msgstr "Sockets du domaine UNIX actives"
-+ 
-+-#: ../netstat.c:1137 ../netstat.c:1666
-++#: ../netstat.c:1237 ../netstat.c:1756
-++#, c-format
-+ msgid "(servers and established)"
-+ msgstr "(serveurs et établies)"
-+ 
-+-#: ../netstat.c:1140 ../netstat.c:1669
-++#: ../netstat.c:1240 ../netstat.c:1759
-++#, c-format
-+ msgid "(only servers)"
-+ msgstr "(seulement serveurs)"
-+ 
-+-#: ../netstat.c:1142 ../netstat.c:1671
-++#: ../netstat.c:1242 ../netstat.c:1761
-++#, c-format
-+ msgid "(w/o servers)"
-+ msgstr "(sans serveurs)"
-+ 
-+-#: ../netstat.c:1145
-++#: ../netstat.c:1245
-++#, c-format
-+ msgid ""
-+ "\n"
-+ "Proto RefCnt Flags       Type       State         I-Node"
-+@@ -994,32 +906,36 @@ msgstr ""
-+ "\n"
-+ "Proto RefCpt Indicatrs   Type       Etat          I-Node"
-+ 
-+-#: ../netstat.c:1147
-++#: ../netstat.c:1247
-++#, c-format
-+ msgid " Path\n"
-+ msgstr " Chemin\n"
-+ 
-+-#: ../netstat.c:1167
-++#: ../netstat.c:1267
-+ msgid "SABM SENT"
-+ msgstr "SABM SENT"
-+ 
-+-#: ../netstat.c:1170
-++#: ../netstat.c:1270
-+ msgid "RECOVERY"
-+ msgstr "RECOVERY"
-+ 
-+-#: ../netstat.c:1184
-++#: ../netstat.c:1284
-++#, c-format
-+ msgid "Active AX.25 sockets\n"
-+ msgstr "Sockets AX.25 actives\n"
-+ 
-+-#: ../netstat.c:1185
-++#: ../netstat.c:1285
-++#, c-format
-+ msgid "Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q\n"
-+ msgstr "Dest       Source     Periph  Etat         Vr/Vs    Send-Q  Recv-Q\n"
-+ 
-+-#: ../netstat.c:1228
-++#: ../netstat.c:1328
-+ #, c-format
-+ msgid "problem reading data from %s\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1279
-++#: ../netstat.c:1379
-++#, c-format
-+ msgid ""
-+ "Active IPX sockets\n"
-+ "Proto Recv-Q Send-Q Local Address              Foreign Address            "
-+@@ -1029,55 +945,53 @@ msgstr ""
-+ "Proto Recv-Q Send-Q Adresse locale             Adresse distante           "
-+ "Etat"
-+ 
-+-#: ../netstat.c:1281
-++#: ../netstat.c:1381
-++#, c-format
-+ msgid " User"
-+ msgstr "Utilisatr"
-+ 
-+-#: ../netstat.c:1315
-++#: ../netstat.c:1415
-+ msgid "ESTAB"
-+ msgstr "ESTAB"
-+ 
-+-#: ../netstat.c:1323
-++#: ../netstat.c:1423
-+ msgid "UNK."
-+ msgstr "UNK."
-+ 
-+-#: ../netstat.c:1367
-+-msgid "     - no statistics available -"
-+-msgstr ""
-+-
-+-#: ../netstat.c:1370
-+-msgid "[NO FLAGS]"
-+-msgstr "[PAS INDICATEURS]"
-+-
-+-#: ../netstat.c:1400
-++#: ../netstat.c:1461
-++#, c-format
-+ msgid "Kernel Interface table\n"
-+ msgstr "Table d'interfaces noyau\n"
-+ 
-+-#: ../netstat.c:1401
-++#: ../netstat.c:1465
-++#, fuzzy, c-format
-+ msgid ""
-+-"Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-++"Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Flg\n"
-+ msgstr ""
-+ "Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR "
-+ "Indic\n"
-+ 
-+-#: ../netstat.c:1404
-++#: ../netstat.c:1469
-+ msgid "missing interface information"
-+ msgstr "informations d'interface manquantes"
-+ 
-+-#: ../netstat.c:1425
-++#: ../netstat.c:1492
-++#, c-format
-+ msgid ""
-+-"usage: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"usage: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ msgstr ""
-+-"syntaxe: netstat [-veenNcCF] [<Af>] -r         netstat "
-+-"{-V|--version|-h|--help}\n"
-++"syntaxe: netstat [-veenNcCF] [<Af>] -r         netstat {-V|--version|-h|--"
-++"help}\n"
-+ 
-+-#: ../netstat.c:1426
-++#: ../netstat.c:1493
-++#, c-format
-+ msgid "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ msgstr "       netstat [-vnNcaeol] [<Socket> ...]\n"
-+ 
-+-#: ../netstat.c:1427
-++#: ../netstat.c:1494
-++#, c-format
-+ msgid ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+@@ -1085,27 +999,30 @@ msgstr ""
-+ "       netstat { [-veenNac] -i | [-cnNe] -M | -s }\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1429
-++#: ../netstat.c:1496
-++#, c-format
-+ msgid "        -r, --route              display routing table\n"
-+ msgstr "        -r, --route              affiche la table de routage\n"
-+ 
-+-#: ../netstat.c:1430
-++#: ../netstat.c:1497
-++#, c-format
-+ msgid "        -i, --interfaces         display interface table\n"
-+ msgstr "        -i, --interfaces         affiche la table d'interfaces\n"
-+ 
-+-#: ../netstat.c:1431
-++#: ../netstat.c:1498
-++#, c-format
-+ msgid "        -g, --groups             display multicast group memberships\n"
-+ msgstr ""
-+ "        -g, --groups             affiche les membres d'un groupe multicast\n"
-+ 
-+-#: ../netstat.c:1432
-++#: ../netstat.c:1499
-++#, c-format
-+ msgid ""
-+ "        -s, --statistics         display networking statistics (like SNMP)\n"
-+-msgstr ""
-+-"        -s, --statistics         affiche les statistiques réseau (comme "
-+-"SNMP)\n"
-++msgstr "        -s, --statistics         affiche les statistiques réseau (comme SNMP)\n"
-+ 
-+-#: ../netstat.c:1434
-++#: ../netstat.c:1501
-++#, c-format
-+ msgid ""
-+ "        -M, --masquerade         display masqueraded connections\n"
-+ "\n"
-+@@ -1113,23 +1030,41 @@ msgstr ""
-+ "        -M, --masquerade         affiche les connexions masquées\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1438 ../route.c:87
-++#: ../netstat.c:1505
-++#, fuzzy, c-format
-++msgid "        --numeric-hosts          don't resolve host names\n"
-++msgstr "        -n, --numeric            ne résout pas les noms\n"
-++
-++#: ../netstat.c:1506
-++#, fuzzy, c-format
-++msgid "        --numeric-ports          don't resolve port names\n"
-++msgstr "        -n, --numeric            ne résout pas les noms\n"
-++
-++#: ../netstat.c:1507
-++#, fuzzy, c-format
-++msgid "        --numeric-users          don't resolve user names\n"
-++msgstr "        -n, --numeric            ne résout pas les noms\n"
-++
-++#: ../netstat.c:1508
-++#, c-format
-+ msgid "        -N, --symbolic           resolve hardware names\n"
-+ msgstr "        -N, --symbolic           résoud les noms matériels\n"
-+ 
-+-#: ../netstat.c:1439 ../route.c:88
-+-#, fuzzy
-++#: ../netstat.c:1509 ../route.c:88
-++#, fuzzy, c-format
-+ msgid "        -e, --extend             display other/more information\n"
-+ msgstr ""
-+ "        -e, --extend             affiche d'autres/plus d'informations\n"
-+ 
-+-#: ../netstat.c:1440
-++#: ../netstat.c:1510
-++#, c-format
-+ msgid "        -p, --programs           display PID/Program name for sockets\n"
-+ msgstr ""
-+ "        -p, --programs           affiche le nom du programme/PID des "
-+ "sockets\n"
-+ 
-+-#: ../netstat.c:1441
-++#: ../netstat.c:1511
-++#, c-format
-+ msgid ""
-+ "        -c, --continuous         continuous listing\n"
-+ "\n"
-+@@ -1137,32 +1072,31 @@ msgstr ""
-+ "        -c, --continuous         listing continu\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1442
-++#: ../netstat.c:1512
-++#, c-format
-+ msgid "        -l, --listening          display listening server sockets\n"
-+-msgstr ""
-+-"        -l, --listening          affiche les sockets du serveur à l'écoute\n"
-++msgstr "        -l, --listening          affiche les sockets du serveur à l'écoute\n"
-+ 
-+-#: ../netstat.c:1443
-++#: ../netstat.c:1513
-++#, c-format
-+ msgid ""
-+ "        -a, --all, --listening   display all sockets (default: connected)\n"
-+-msgstr ""
-+-"        -a, --all, --listening   affiche toutes les prises (défaut: "
-+-"connectés)\n"
-++msgstr "        -a, --all, --listening   affiche toutes les prises (défaut: connectés)\n"
-+ 
-+-#: ../netstat.c:1444
-++#: ../netstat.c:1514
-++#, c-format
-+ msgid "        -o, --timers             display timers\n"
-+ msgstr "        -o, --timers             affiche les timers\n"
-+ 
-+-#: ../netstat.c:1445 ../route.c:89
-+-#, fuzzy
-++#: ../netstat.c:1515 ../route.c:89
-++#, fuzzy, c-format
-+ msgid ""
-+ "        -F, --fib                display Forwarding Information Base "
-+ "(default)\n"
-+-msgstr ""
-+-"        -F, --fib                affiche la Forwarding Infomation Base "
-+-"(défaut)\n"
-++msgstr "        -F, --fib                affiche la Forwarding Infomation Base (défaut)\n"
-+ 
-+-#: ../netstat.c:1446 ../route.c:90
-++#: ../netstat.c:1516 ../route.c:90
-++#, c-format
-+ msgid ""
-+ "        -C, --cache              display routing cache instead of FIB\n"
-+ "\n"
-+@@ -1170,110 +1104,118 @@ msgstr ""
-+ "        -C, --cache              affiche le cache de routage au lieu de FIB\n"
-+ "\n"
-+ 
-+-#: ../netstat.c:1448
-++#: ../netstat.c:1518
-++#, c-format
-+ msgid ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ msgstr ""
-+-"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx "
-+-"--netrom\n"
-++"  <Socket>={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --"
-++"netrom\n"
-+ 
-+-#: ../netstat.c:1449 ../route.c:92
-+-#, c-format
-+-msgid "  <AF>=Use '-A <af>' or '--<af>' Default: %s\n"
-++#: ../netstat.c:1519
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-6|-4' or '-A <af>' or '--<af>'; default: %s\n"
-+ msgstr "  <AF>=Utiliser '-A <af>' ou '--<af>' Défaut: %s\n"
-+ 
-+-#: ../netstat.c:1450 ../route.c:93
-++#: ../netstat.c:1520 ../route.c:93
-++#, c-format
-+ msgid "  List of possible address families (which support routing):\n"
-+ msgstr "  Liste les familles d'adresses possibles (supportant le routage):\n"
-+ 
-+-#: ../netstat.c:1663
-++#: ../netstat.c:1753
-++#, c-format
-+ msgid "Active Internet connections "
-+ msgstr "Connexions Internet actives "
-+ 
-+-#: ../netstat.c:1673
-++#: ../netstat.c:1763
-++#, c-format
-+ msgid ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Local Address           Foreign Address         State    "
-+-"  "
-++"Proto Recv-Q Send-Q Local Address           Foreign Address         "
-++"State      "
-+ msgstr ""
-+ "\n"
-+-"Proto Recv-Q Send-Q Adresse locale          Adresse distante        Etat     "
-+-"  "
-++"Proto Recv-Q Send-Q Adresse locale          Adresse distante        "
-++"Etat       "
-+ 
-+-#: ../netstat.c:1675
-++#: ../netstat.c:1765
-++#, c-format
-+ msgid " User       Inode     "
-+ msgstr " Utilisatr  Inode     "
-+ 
-+-#: ../netstat.c:1678
-++#: ../netstat.c:1768
-++#, c-format
-+ msgid " Timer"
-+ msgstr " Timer"
-+ 
-+-#: ../netstat.c:1708
-++#: ../netstat.c:1798
-++#, c-format
-+ msgid "IPv4 Group Memberships\n"
-+ msgstr ""
-+ 
-+-#: ../netstat.c:1709
-++#: ../netstat.c:1799
-++#, c-format
-+ msgid "Interface       RefCnt Group\n"
-+ msgstr ""
-+ 
-+-#: ../rarp.c:43
-++#: ../rarp.c:44
-+ msgid "This kernel does not support RARP.\n"
-+ msgstr "Ce noyau ne supporte pas RARP.\n"
-+ 
-+-#: ../rarp.c:82
-++#: ../rarp.c:83
-+ #, c-format
-+ msgid "no RARP entry for %s.\n"
-+ msgstr "pas d'entrée RARP pour %s.\n"
-+ 
-+-#: ../rarp.c:95
-++#: ../rarp.c:96
-+ #, c-format
-+ msgid "%s: bad hardware address\n"
-+ msgstr "%s: mauvaise adresse matériel\n"
-+ 
-+-#: ../rarp.c:127
-++#: ../rarp.c:128
-+ #, c-format
-+ msgid "rarp: cannot open file %s:%s.\n"
-+ msgstr "rarp: ne peut ouvrir le fichier %s:%s.\n"
-+ 
-+-#: ../rarp.c:139
-++#: ../rarp.c:140
-+ #, c-format
-+ msgid "rarp: format error at %s:%u\n"
-+ msgstr "rarp: erreur de format à %s:%u\n"
-+ 
-+-#: ../rarp.c:143 ../rarp.c:287
-++#: ../rarp.c:144 ../rarp.c:289
-+ #, c-format
-+ msgid "rarp: %s: unknown host\n"
-+ msgstr "rarp: %s: hôte inconnu\n"
-+ 
-+-#: ../rarp.c:146
-++#: ../rarp.c:147
-+ #, c-format
-+ msgid "rarp: cannot set entry from %s:%u\n"
-+ msgstr "rarp: ne peut définir l'entrée depuis %s:%u\n"
-+ 
-+-#: ../rarp.c:175
-++#: ../rarp.c:176
-++#, c-format
-+ msgid "Usage: rarp -a                               list entries in cache.\n"
-+-msgstr ""
-+-"Usage: rarp -a                               liste les entrées en cache.\n"
-++msgstr "Usage: rarp -a                               liste les entrées en cache.\n"
-+ 
-+-#: ../rarp.c:176
-++#: ../rarp.c:177
-++#, c-format
-+ msgid "       rarp -d <hostname>                    delete entry from cache.\n"
-+-msgstr ""
-+-"       rarp -d <hostname>                    supprime l'entrée du cache.\n"
-++msgstr "       rarp -d <hostname>                    supprime l'entrée du cache.\n"
-+ 
-+-#: ../rarp.c:177
-++#: ../rarp.c:178
-++#, c-format
-+ msgid "       rarp [<HW>] -s <hostname> <hwaddr>    add entry to cache.\n"
-+-msgstr ""
-+-"       rarp [<HW>] -s <hostname> <adrmat>    ajoute l'entrée au cache.\n"
-++msgstr "       rarp [<HW>] -s <hostname> <adrmat>    ajoute l'entrée au cache.\n"
-+ 
-+-#: ../rarp.c:178
-++#: ../rarp.c:179
-++#, c-format
-+ msgid ""
-+ "       rarp -f                               add entries from /etc/ethers.\n"
-+-msgstr ""
-+-"       rarp -f                               ajoute les entrées depuis "
-+-"/etc/ethers.\n"
-++msgstr "       rarp -f                               ajoute les entrées depuis /etc/ethers.\n"
-+ 
-+-#: ../rarp.c:179
-++#: ../rarp.c:180
-++#, c-format
-+ msgid ""
-+ "       rarp -V                               display program version.\n"
-+ "\n"
-+@@ -1281,24 +1223,26 @@ msgstr ""
-+ "       rarp -V                               affiche la version.\n"
-+ "\n"
-+ 
-+-#: ../rarp.c:236
-++#: ../rarp.c:238
-+ #, c-format
-+ msgid "%s: illegal option mix.\n"
-+ msgstr "%s: combinaison d'options illégales.\n"
-+ 
-+-#: ../rarp.c:267
-++#: ../rarp.c:269
-+ #, c-format
-+ msgid "rarp: %s: unknown hardware type.\n"
-+ msgstr "rarp: %s: type de matériel inconnu.\n"
-+ 
-+-#: ../route.c:79
-++#: ../route.c:80
-++#, c-format
-+ msgid ""
-+ "Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables\n"
-+ msgstr ""
-+ "Syntaxe: route [-nNvee] [-FC] [<AF>]           Liste les tables de routage "
-+ "noyau\n"
-+ 
-+-#: ../route.c:80
-++#: ../route.c:81
-++#, c-format
-+ msgid ""
-+ "       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.\n"
-+ "\n"
-+@@ -1307,15 +1251,15 @@ msgstr ""
-+ "pour AF.\n"
-+ "\n"
-+ 
-+-#: ../route.c:82
-++#: ../route.c:83
-++#, c-format
-+ msgid ""
-+ "       route {-h|--help} [<AF>]              Detailed usage syntax for "
-+ "specified AF.\n"
-+-msgstr ""
-+-"       route {-h|--help} [<AF>]              Utilisation détaillée pour l'AF "
-+-"spécifié.\n"
-++msgstr "       route {-h|--help} [<AF>]              Utilisation détaillée pour l'AF spécifié.\n"
-+ 
-+-#: ../route.c:83
-++#: ../route.c:84
-++#, c-format
-+ msgid ""
-+ "       route {-V|--version}                  Display version/author and "
-+ "exit.\n"
-+@@ -1325,16 +1269,23 @@ msgstr ""
-+ "termine.\n"
-+ "\n"
-+ 
-++#: ../route.c:92
-++#, fuzzy, c-format
-++msgid "  <AF>=Use '-A <af>' or '--<af>'; default: %s\n"
-++msgstr "  <AF>=Utiliser '-A <af>' ou '--<af>' Défaut: %s\n"
-++
-+ #: ../plipconfig.c:66
-++#, c-format
-+ msgid "Usage: plipconfig [-a] [-i] [-v] interface\n"
-+ msgstr "Syntaxe: plipconfig [-a] [-i] [-v] interface\n"
-+ 
-+ #: ../plipconfig.c:67
-++#, c-format
-+ msgid "                  [nibble NN] [trigger NN]\n"
-+ msgstr "                  [nibble NN] [trigger NN]\n"
-+ 
-+ #: ../plipconfig.c:68
-+-#, fuzzy
-++#, fuzzy, c-format
-+ msgid "       plipconfig -V | --version\n"
-+ msgstr "       plipconfig -V\n"
-+ 
-+@@ -1343,474 +1294,763 @@ msgstr "       plipconfig -V\n"
-+ msgid "%s\tnibble %lu  trigger %lu\n"
-+ msgstr "%s\tnibble %lu  trigger %lu\n"
-+ 
-+-#: ../iptunnel.c:79
-++#: ../iptunnel.c:85
-++#, c-format
-+ msgid "Usage: iptunnel { add | change | del | show } [ NAME ]\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:80
-++#: ../iptunnel.c:86
-++#, c-format
-+ msgid ""
-+ "          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:81
-++#: ../iptunnel.c:87
-++#, c-format
-+ msgid "          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:82
-++#: ../iptunnel.c:88
-++#, c-format
-+ msgid "          [ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:83
-++#: ../iptunnel.c:89
-++#, c-format
-+ msgid ""
-+ "       iptunnel -V | --version\n"
-+ "\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:84
-++#: ../iptunnel.c:90
-++#, c-format
-+ msgid "Where: NAME := STRING\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:85
-++#: ../iptunnel.c:91
-++#, c-format
-+ msgid "       ADDR := { IP_ADDRESS | any }\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:86
-++#: ../iptunnel.c:92
-++#, c-format
-+ msgid "       TOS  := { NUMBER | inherit }\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:87
-++#: ../iptunnel.c:93
-++#, c-format
-+ msgid "       TTL  := { 1..255 | inherit }\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:88
-++#: ../iptunnel.c:94
-++#, c-format
-+ msgid "       KEY  := { DOTTED_QUAD | NUMBER }\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:326
-++#: ../iptunnel.c:332
-++#, c-format
-+ msgid "Keys are not allowed with ipip and sit.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:346
-++#: ../iptunnel.c:352
-++#, c-format
-+ msgid "Broadcast tunnel requires a source address.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:361
-++#: ../iptunnel.c:367
-++#, c-format
-+ msgid "ttl != 0 and noptmudisc are incompatible\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:373
-++#: ../iptunnel.c:379
-++#, c-format
-+ msgid "cannot determine tunnel mode (ipip, gre or sit)\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:411
-++#: ../iptunnel.c:417
-+ #, c-format
-+ msgid "%s: %s/ip  remote %s  local %s "
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:415
-++#: ../iptunnel.c:421
-+ #, fuzzy
-+ msgid "unknown"
-+ msgstr "Inconnu"
-+ 
-+-#: ../iptunnel.c:447
-++#: ../iptunnel.c:453
-++#, c-format
-+ msgid "  Drop packets out of sequence.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:449
-++#: ../iptunnel.c:455
-++#, c-format
-+ msgid "  Checksum in received packet is required.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:451
-++#: ../iptunnel.c:457
-++#, c-format
-+ msgid "  Sequence packets on output.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:453
-++#: ../iptunnel.c:459
-++#, c-format
-+ msgid "  Checksum output packets.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:481
-++#: ../iptunnel.c:487
-++#, c-format
-+ msgid "Wrong format of /proc/net/dev. Sorry.\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:494
-++#: ../iptunnel.c:500
-+ #, c-format
-+ msgid "Failed to get type of [%s]\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:510
-++#: ../iptunnel.c:516
-++#, c-format
-+ msgid "RX: Packets    Bytes        Errors CsumErrs OutOfSeq Mcasts\n"
-+ msgstr ""
-+ 
-+-#: ../iptunnel.c:513
-++#: ../iptunnel.c:519
-++#, c-format
-+ msgid "TX: Packets    Bytes        Errors DeadLoop NoRoute  NoBufs\n"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:45
-++#: ../statistics.c:47
-+ msgid "ICMP input histogram:"
-+ msgstr "Histogramme d'entrée ICMP"
-+ 
-+-#: ../statistics.c:46
-++#: ../statistics.c:48
-+ msgid "ICMP output histogram:"
-+ msgstr "Histogramme de sortie ICMP"
-+ 
-+-#: ../statistics.c:63
-++#: ../statistics.c:65
-+ #, c-format
-+ msgid "Forwarding is %s"
-+ msgstr "Réacheminement est %s"
-+ 
-+-#: ../statistics.c:64
-+-#, c-format
-+-msgid "Default TTL is %d"
-++#: ../statistics.c:66
-++#, fuzzy, c-format
-++msgid "Default TTL is %u"
-+ msgstr "TTL par défaut est %d"
-+ 
-+-#: ../statistics.c:65
-+-#, c-format
-+-msgid "%d total packets received"
-++#: ../statistics.c:67
-++#, fuzzy, c-format
-++msgid "%u total packets received"
-+ msgstr "%d paquets totaux reçus"
-+ 
-+-#: ../statistics.c:66
-+-#, c-format
-+-msgid "%d with invalid headers"
-++#: ../statistics.c:68
-++#, fuzzy, c-format
-++msgid "%u with invalid headers"
-+ msgstr "%d avec en-tête invalides"
-+ 
-+-#: ../statistics.c:67
-+-#, c-format
-+-msgid "%d with invalid addresses"
-++#: ../statistics.c:69
-++#, fuzzy, c-format
-++msgid "%u with invalid addresses"
-+ msgstr "%d avec adresses invalides"
-+ 
-+-#: ../statistics.c:68
-+-#, c-format
-+-msgid "%d forwarded"
-++#: ../statistics.c:70
-++#, fuzzy, c-format
-++msgid "%u forwarded"
-+ msgstr "%d réacheminées"
-+ 
-+-#: ../statistics.c:69
-+-#, c-format
-+-msgid "%d with unknown protocol"
-++#: ../statistics.c:71
-++#, fuzzy, c-format
-++msgid "%u with unknown protocol"
-+ msgstr "%d avec protocole inconnu"
-+ 
-+-#: ../statistics.c:70
-+-#, c-format
-+-msgid "%d incoming packets discarded"
-++#: ../statistics.c:72
-++#, fuzzy, c-format
-++msgid "%u incoming packets discarded"
-+ msgstr "%d paquets entrant jetés"
-+ 
-+-#: ../statistics.c:71
-+-#, c-format
-+-msgid "%d incoming packets delivered"
-++#: ../statistics.c:73
-++#, fuzzy, c-format
-++msgid "%u incoming packets delivered"
-+ msgstr "%d paquets entrant délivrés"
-+ 
-+-#: ../statistics.c:72
-+-#, c-format
-+-msgid "%d requests sent out"
-++#: ../statistics.c:74
-++#, fuzzy, c-format
-++msgid "%u requests sent out"
-+ msgstr "%d requêtes envoyées"
-+ 
-+ #. ?
-+-#: ../statistics.c:73
-+-#, c-format
-+-msgid "%d outgoing packets dropped"
-++#: ../statistics.c:75
-++#, fuzzy, c-format
-++msgid "%u outgoing packets dropped"
-+ msgstr "%d paquets sortant jetés"
-+ 
-+-#: ../statistics.c:74
-+-#, c-format
-+-msgid "%d dropped because of missing route"
-++#: ../statistics.c:76
-++#, fuzzy, c-format
-++msgid "%u dropped because of missing route"
-+ msgstr "%d jetés pour cause de route manquante"
-+ 
-+-#: ../statistics.c:75
-+-#, c-format
-+-msgid "%d fragments dropped after timeout"
-++#: ../statistics.c:77
-++#, fuzzy, c-format
-++msgid "%u fragments dropped after timeout"
-+ msgstr "%d fragments jetés après timeout"
-+ 
-+-#: ../statistics.c:76
-+-#, c-format
-+-msgid "%d reassemblies required"
-++#: ../statistics.c:78
-++#, fuzzy, c-format
-++msgid "%u reassemblies required"
-+ msgstr "%d nécessitant un réassemblage"
-+ 
-+ #. ?
-+-#: ../statistics.c:77
-+-#, c-format
-+-msgid "%d packets reassembled ok"
-++#: ../statistics.c:79
-++#, fuzzy, c-format
-++msgid "%u packets reassembled ok"
-+ msgstr "%d paquets réassemblés correctement"
-+ 
-+-#: ../statistics.c:78
-+-#, c-format
-+-msgid "%d packet reassembles failed"
-++#: ../statistics.c:80
-++#, fuzzy, c-format
-++msgid "%u packet reassembles failed"
-+ msgstr "%d paquets mal réassemblés"
-+ 
-+-#: ../statistics.c:79
-+-#, c-format
-+-msgid "%d fragments received ok"
-++#: ../statistics.c:81
-++#, fuzzy, c-format
-++msgid "%u fragments received ok"
-+ msgstr "%d fragments reçus correctement"
-+ 
-+-#: ../statistics.c:80
-+-#, c-format
-+-msgid "%d fragments failed"
-++#: ../statistics.c:82
-++#, fuzzy, c-format
-++msgid "%u fragments failed"
-+ msgstr "%d fragments en échec"
-+ 
-+-#: ../statistics.c:81
-+-#, c-format
-+-msgid "%d fragments created"
-++#: ../statistics.c:83
-++#, fuzzy, c-format
-++msgid "%u fragments created"
-+ msgstr "%d fragments créés"
-+ 
-+-#: ../statistics.c:86
-+-#, c-format
-+-msgid "%d ICMP messages received"
-++#: ../statistics.c:88
-++#, fuzzy, c-format
-++msgid "%u ICMP messages received"
-+ msgstr "%d messages ICMP reçus"
-+ 
-+-#: ../statistics.c:87
-+-#, c-format
-+-msgid "%d input ICMP message failed."
-++#: ../statistics.c:89
-++#, fuzzy, c-format
-++msgid "%u input ICMP message failed."
-+ msgstr "%d messages d'entrée ICMP en échec"
-+ 
-+-#: ../statistics.c:88 ../statistics.c:101
-+-#, c-format
-+-msgid "destination unreachable: %d"
-++#: ../statistics.c:90 ../statistics.c:103
-++#, fuzzy, c-format
-++msgid "destination unreachable: %u"
-+ msgstr "destination injoignable: %d"
-+ 
-+-#: ../statistics.c:89
-+-#, c-format
-+-msgid "timeout in transit: %d"
-++#: ../statistics.c:91
-++#, fuzzy, c-format
-++msgid "timeout in transit: %u"
-+ msgstr "timeout en transmission: %d"
-+ 
-+-#: ../statistics.c:90 ../statistics.c:103
-+-#, c-format
-+-msgid "wrong parameters: %d"
-++#: ../statistics.c:92 ../statistics.c:105
-++#, fuzzy, c-format
-++msgid "wrong parameters: %u"
-+ msgstr "mauvais paramètre: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:91
-+-#, c-format
-+-msgid "source quenchs: %d"
-++#: ../statistics.c:93
-++#, fuzzy, c-format
-++msgid "source quenches: %u"
-+ msgstr "Source Quenchs: %d"
-+ 
-+-#: ../statistics.c:92
-+-#, c-format
-+-msgid "redirects: %d"
-++#: ../statistics.c:94
-++#, fuzzy, c-format
-++msgid "redirects: %u"
-+ msgstr "Redirections: %d"
-+ 
-+-#: ../statistics.c:93
-+-#, c-format
-+-msgid "echo requests: %d"
-++#: ../statistics.c:95
-++#, fuzzy, c-format
-++msgid "echo requests: %u"
-+ msgstr "requêtes echo: %d"
-+ 
-+-#: ../statistics.c:94 ../statistics.c:107
-+-#, c-format
-+-msgid "echo replies: %d"
-++#: ../statistics.c:96 ../statistics.c:109
-++#, fuzzy, c-format
-++msgid "echo replies: %u"
-+ msgstr "réponses echo: %d"
-+ 
-+-#: ../statistics.c:95
-+-#, c-format
-+-msgid "timestamp request: %d"
-++#: ../statistics.c:97
-++#, fuzzy, c-format
-++msgid "timestamp request: %u"
-+ msgstr "requêtes datées: %d"
-+ 
-+-#: ../statistics.c:96
-+-#, c-format
-+-msgid "timestamp reply: %d"
-++#: ../statistics.c:98
-++#, fuzzy, c-format
-++msgid "timestamp reply: %u"
-+ msgstr "réponses datées: %d"
-+ 
-+-#: ../statistics.c:97
-+-#, c-format
-+-msgid "address mask request: %d"
-++#: ../statistics.c:99
-++#, fuzzy, c-format
-++msgid "address mask request: %u"
-+ msgstr "requêtes de masque d'adresse: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:98
-+-msgid "address mask replies"
-+-msgstr "réponses de masque d'adresses"
-++#: ../statistics.c:100 ../statistics.c:113
-++#, fuzzy, c-format
-++msgid "address mask replies: %u"
-++msgstr "réponses de masque d'adresse: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:99
-+-#, c-format
-+-msgid "%d ICMP messages sent"
-++#: ../statistics.c:101
-++#, fuzzy, c-format
-++msgid "%u ICMP messages sent"
-+ msgstr "%d messages ICMP envoyés"
-+ 
-+-#: ../statistics.c:100
-+-#, c-format
-+-msgid "%d ICMP messages failed"
-++#: ../statistics.c:102
-++#, fuzzy, c-format
-++msgid "%u ICMP messages failed"
-+ msgstr "%d messages ICMP en échec"
-+ 
-+-#: ../statistics.c:102
-+-#, c-format
-+-msgid "time exceeded: %d"
-++#: ../statistics.c:104
-++#, fuzzy, c-format
-++msgid "time exceeded: %u"
-+ msgstr "temps dépassé: %d"
-+ 
-+ #. ?
-+-#: ../statistics.c:104
-+-#, c-format
-+-msgid "source quench: %d"
-++#: ../statistics.c:106
-++#, fuzzy, c-format
-++msgid "source quench: %u"
-+ msgstr "Source Quench: %d"
-+ 
-+-#: ../statistics.c:105
-+-#, c-format
-+-msgid "redirect: %d"
-++#: ../statistics.c:107
-++#, fuzzy, c-format
-++msgid "redirect: %u"
-+ msgstr "redirection: %d"
-+ 
-+-#: ../statistics.c:106
-+-#, c-format
-+-msgid "echo request: %d"
-++#: ../statistics.c:108
-++#, fuzzy, c-format
-++msgid "echo request: %u"
-+ msgstr "requête echo: %d"
-+ 
-+-#: ../statistics.c:108
-+-#, c-format
-+-msgid "timestamp requests: %d"
-++#: ../statistics.c:110
-++#, fuzzy, c-format
-++msgid "timestamp requests: %u"
-+ msgstr "requêtes datées: %d"
-+ 
-+-#: ../statistics.c:109
-+-#, c-format
-+-msgid "timestamp replies: %d"
-++#: ../statistics.c:111
-++#, fuzzy, c-format
-++msgid "timestamp replies: %u"
-+ msgstr "réponses datées: %d"
-+ 
-+-#: ../statistics.c:110
-+-#, c-format
-+-msgid "address mask requests: %d"
-++#: ../statistics.c:112
-++#, fuzzy, c-format
-++msgid "address mask requests: %u"
-+ msgstr "requêtes de masque d'adresse: %d"
-+ 
-+-#: ../statistics.c:111
-+-#, c-format
-+-msgid "address mask replies: %d"
-+-msgstr "réponses de masque d'adresse: %d"
-+-
-+-#: ../statistics.c:116
-++#: ../statistics.c:118
-+ #, c-format
-+ msgid "RTO algorithm is %s"
-+ msgstr "algorithme RTO est %s"
-+ 
-+-#: ../statistics.c:120
-+-#, c-format
-+-msgid "%d active connections openings"
-++#: ../statistics.c:122
-++#, fuzzy, c-format
-++msgid "%u active connections openings"
-+ msgstr "%d ouvertures de connexions actives"
-+ 
-+-#: ../statistics.c:121
-+-#, c-format
-+-msgid "%d passive connection openings"
-++#: ../statistics.c:123
-++#, fuzzy, c-format
-++msgid "%u passive connection openings"
-+ msgstr "%d ouvertures de connexions passives"
-+ 
-+-#: ../statistics.c:122
-+-#, c-format
-+-msgid "%d failed connection attempts"
-++#: ../statistics.c:124
-++#, fuzzy, c-format
-++msgid "%u failed connection attempts"
-+ msgstr "%d tentatives de connexion échouées"
-+ 
-+-#: ../statistics.c:123
-+-#, c-format
-+-msgid "%d connection resets received"
-++#: ../statistics.c:125
-++#, fuzzy, c-format
-++msgid "%u connection resets received"
-+ msgstr "%d réinitialisations de connexions reçues"
-+ 
-+-#: ../statistics.c:124
-+-#, c-format
-+-msgid "%d connections established"
-++#: ../statistics.c:126
-++#, fuzzy, c-format
-++msgid "%u connections established"
-+ msgstr "%d connexions établies"
-+ 
-+-#: ../statistics.c:125
-+-#, c-format
-+-msgid "%d segments received"
-++#: ../statistics.c:127
-++#, fuzzy, c-format
-++msgid "%u segments received"
-+ msgstr "%d segments reçus"
-+ 
-+-#: ../statistics.c:126
-+-#, c-format
-+-msgid "%d segments send out"
-++#: ../statistics.c:128
-++#, fuzzy, c-format
-++msgid "%u segments send out"
-+ msgstr "%d segments envoyés"
-+ 
-+-#: ../statistics.c:127
-+-#, c-format
-+-msgid "%d segments retransmited"
-++#: ../statistics.c:129
-++#, fuzzy, c-format
-++msgid "%u segments retransmited"
-+ msgstr "%d segments retransmis"
-+ 
-+-#: ../statistics.c:128
-+-#, c-format
-+-msgid "%d bad segments received."
-++#: ../statistics.c:130
-++#, fuzzy, c-format
-++msgid "%u bad segments received."
-+ msgstr "%d mauvais segments reçus."
-+ 
-+-#: ../statistics.c:129
-+-#, c-format
-+-msgid "%d resets sent"
-++#: ../statistics.c:131
-++#, fuzzy, c-format
-++msgid "%u resets sent"
-+ msgstr "%d réinitialisations envoyées"
-+ 
-+-#: ../statistics.c:134
-+-#, c-format
-+-msgid "%d packets received"
-++#: ../statistics.c:136
-++#, fuzzy, c-format
-++msgid "%u packets received"
-+ msgstr "%d paquets reçus"
-+ 
-+-#: ../statistics.c:135
-+-#, c-format
-+-msgid "%d packets to unknown port received."
-++#: ../statistics.c:137
-++#, fuzzy, c-format
-++msgid "%u packets to unknown port received."
-+ msgstr "%d paquets reçus pour un port inconnu"
-+ 
-+-#: ../statistics.c:136
-+-#, c-format
-+-msgid "%d packet receive errors"
-++#: ../statistics.c:138
-++#, fuzzy, c-format
-++msgid "%u packet receive errors"
-+ msgstr "%d erreurs en réception de paquets"
-+ 
-+-#: ../statistics.c:137
-++#: ../statistics.c:139
-++#, fuzzy, c-format
-++msgid "%u packets sent"
-++msgstr "%d paquets envoyés"
-++
-++#: ../statistics.c:144
-++#, fuzzy, c-format
-++msgid "%u SYN cookies sent"
-++msgstr "%d SYN-Cookies reçus"
-++
-++#: ../statistics.c:145
-++#, fuzzy, c-format
-++msgid "%u SYN cookies received"
-++msgstr "%d SYN-Cookies reçus"
-++
-++#: ../statistics.c:146
-++#, fuzzy, c-format
-++msgid "%u invalid SYN cookies received"
-++msgstr "%d SYN-Cookies reçus incorrects"
-++
-++#: ../statistics.c:148
-++#, fuzzy, c-format
-++msgid "%u resets received for embryonic SYN_RECV sockets"
-++msgstr "%d réinitialisations reçues pour sockets SYN_RECV embryonnaires"
-++
-++#: ../statistics.c:150
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue because of socket buffer overrun"
-++msgstr "%d paquets supprimés de la file de réception en raison de tampon de sockets plein"
-++
-++#. obsolete: 2.2.0 doesn't do that anymore
-++#: ../statistics.c:153
-++#, fuzzy, c-format
-++msgid "%u packets pruned from receive queue"
-++msgstr "%d paquets supprimés de la file hors service"
-++
-++#: ../statistics.c:154
-++#, fuzzy, c-format
-++msgid ""
-++"%u packets dropped from out-of-order queue because of socket buffer overrun"
-++msgstr "%d paquets jetés de la file hors service en raison de tampon de sockets plein"
-++
-++#: ../statistics.c:156
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because they were out-of-window"
-++msgstr "%d ICMP paquets jetés car hors de la fenêtre"
-++
-++#: ../statistics.c:158
-++#, fuzzy, c-format
-++msgid "%u ICMP packets dropped because socket was locked"
-++msgstr "%d paquets ICMP jetés car la socket a été vérouillée"
-++
-++#: ../statistics.c:160
-+ #, c-format
-+-msgid "%d packets sent"
-++msgid "%u TCP sockets finished time wait in fast timer"
-++msgstr ""
-++
-++#: ../statistics.c:161
-++#, c-format
-++msgid "%u time wait sockets recycled by time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:162
-++#, c-format
-++msgid "%u TCP sockets finished time wait in slow timer"
-++msgstr ""
-++
-++#: ../statistics.c:163
-++#, c-format
-++msgid "%u passive connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:165
-++#, c-format
-++msgid "%u active connections rejected because of time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:167
-++#, c-format
-++msgid "%u packets rejects in established connections because of timestamp"
-++msgstr ""
-++
-++#: ../statistics.c:169
-++#, fuzzy, c-format
-++msgid "%u delayed acks sent"
-+ msgstr "%d paquets envoyés"
-+ 
-+-#: ../statistics.c:142
-++#: ../statistics.c:170
-+ #, c-format
-+-msgid "%d SYN cookies sent"
-++msgid "%u delayed acks further delayed because of locked socket"
-+ msgstr ""
-+ 
-+-#: ../statistics.c:143
-++#: ../statistics.c:172
-+ #, c-format
-+-msgid "%d SYN cookies received"
-+-msgstr "%d SYN-Cookies reçus"
-++msgid "Quick ack mode was activated %u times"
-++msgstr ""
-+ 
-+-#: ../statistics.c:144
-++#: ../statistics.c:173
-+ #, c-format
-+-msgid "%d invalid SYN cookies received"
-+-msgstr "%d SYN-Cookies reçus incorrects"
-++msgid "%u times the listen queue of a socket overflowed"
-++msgstr ""
-+ 
-+-#: ../statistics.c:146
-++#: ../statistics.c:175
-+ #, c-format
-+-msgid "%d resets received for embryonic SYN_RECV sockets"
-+-msgstr "%d réinitialisations reçues pour sockets SYN_RECV embryonnaires"
-++msgid "%u SYNs to LISTEN sockets ignored"
-++msgstr ""
-+ 
-+-#: ../statistics.c:148
-++#: ../statistics.c:176
-+ #, c-format
-+-msgid "%d packets pruned from receive queue because of socket buffer overrun"
-++msgid "%u packets directly queued to recvmsg prequeue."
-+ msgstr ""
-+-"%d paquets supprimés de la file de réception en raison de tampon de sockets "
-+-"plein"
-+ 
-+-#. obsolete: 2.2.0 doesn't do that anymore
-+-#: ../statistics.c:151
-++#: ../statistics.c:178
-++#, c-format
-++msgid "%u of bytes directly received from backlog"
-++msgstr ""
-++
-++#: ../statistics.c:180
-+ #, c-format
-+-msgid "%d packets pruned from out-of-order queue"
-++msgid "%u of bytes directly received from prequeue"
-++msgstr ""
-++
-++#: ../statistics.c:182
-++#, fuzzy, c-format
-++msgid "%u packets dropped from prequeue"
-+ msgstr "%d paquets supprimés de la file hors service"
-+ 
-+-#: ../statistics.c:152
-++#: ../statistics.c:183
-++#, fuzzy, c-format
-++msgid "%u packet headers predicted"
-++msgstr "%d paquets reçus"
-++
-++#: ../statistics.c:184
-+ #, c-format
-+-msgid ""
-+-"%d packets dropped from out-of-order queue because of socket buffer overrun"
-++msgid "%u packets header predicted and directly queued to user"
-+ msgstr ""
-+-"%d paquets jetés de la file hors service en raison de tampon de sockets plein"
-+ 
-+-#: ../statistics.c:154
-++#: ../statistics.c:186
-+ #, c-format
-+-msgid "%d ICMP packets dropped because they were out-of-window"
-+-msgstr "%d ICMP paquets jetés car hors de la fenêtre"
-++msgid "Ran %u times out of system memory during packet sending"
-++msgstr ""
-+ 
-+-#: ../statistics.c:156
-++#: ../statistics.c:188
-++#, fuzzy, c-format
-++msgid "%u acknowledgments not containing data received"
-++msgstr "%d paquets reçus pour un port inconnu"
-++
-++#: ../statistics.c:189
-+ #, c-format
-+-msgid "%d ICMP packets dropped because socket was locked"
-+-msgstr "%d paquets ICMP jetés car la socket a été vérouillée"
-++msgid "%u predicted acknowledgments"
-++msgstr ""
-++
-++#: ../statistics.c:190
-++#, c-format
-++msgid "%u times recovered from packet loss due to fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:191
-++#, c-format
-++msgid "%u times recovered from packet loss due to SACK data"
-++msgstr ""
-++
-++#: ../statistics.c:192
-++#, fuzzy, c-format
-++msgid "%u bad SACKs received"
-++msgstr "%d mauvais segments reçus."
-++
-++#: ../statistics.c:193
-++#, c-format
-++msgid "Detected reordering %u times using FACK"
-++msgstr ""
-++
-++#: ../statistics.c:194
-++#, c-format
-++msgid "Detected reordering %u times using SACK"
-++msgstr ""
-++
-++#: ../statistics.c:195
-++#, c-format
-++msgid "Detected reordering %u times using time stamp"
-++msgstr ""
-++
-++#: ../statistics.c:196
-++#, c-format
-++msgid "Detected reordering %u times using reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:197
-++#, c-format
-++msgid "%u congestion windows fully recovered"
-++msgstr ""
-++
-++#: ../statistics.c:198
-++#, c-format
-++msgid "%u congestion windows partially recovered using Hoe heuristic"
-++msgstr ""
-++
-++#: ../statistics.c:199
-++#, c-format
-++msgid "%u congestion window recovered using DSACK"
-++msgstr ""
-++
-++#: ../statistics.c:200
-++#, c-format
-++msgid "%u congestion windows recovered after partial ack"
-++msgstr ""
-++
-++#: ../statistics.c:201
-++#, fuzzy, c-format
-++msgid "%u retransmits lost"
-++msgstr "%d réinitialisations envoyées"
-++
-++#: ../statistics.c:202
-++#, c-format
-++msgid "%u timeouts after reno fast retransmit"
-++msgstr ""
-++
-++#: ../statistics.c:203
-++#, c-format
-++msgid "%u timeouts after SACK recovery"
-++msgstr ""
-++
-++#: ../statistics.c:204
-++#, c-format
-++msgid "%u timeouts in loss state"
-++msgstr ""
-++
-++#: ../statistics.c:205
-++#, fuzzy, c-format
-++msgid "%u fast retransmits"
-++msgstr "%d segments retransmis"
-++
-++#: ../statistics.c:206
-++#, c-format
-++msgid "%u forward retransmits"
-++msgstr ""
-++
-++#: ../statistics.c:207
-++#, c-format
-++msgid "%u retransmits in slow start"
-++msgstr ""
-++
-++#: ../statistics.c:208
-++#, c-format
-++msgid "%u other TCP timeouts"
-++msgstr ""
-++
-++#: ../statistics.c:209
-++#, fuzzy, c-format
-++msgid "%u reno fast retransmits failed"
-++msgstr "%d segments retransmis"
-++
-++#: ../statistics.c:210
-++#, fuzzy, c-format
-++msgid "%u sack retransmits failed"
-++msgstr "%d paquets mal réassemblés"
-++
-++#: ../statistics.c:211
-++#, c-format
-++msgid "%u times receiver scheduled too late for direct processing"
-++msgstr ""
-++
-++#: ../statistics.c:212
-++#, fuzzy, c-format
-++msgid "%u packets collapsed in receive queue due to low socket buffer"
-++msgstr "%d paquets supprimés de la file de réception en raison de tampon de sockets plein"
-++
-++#: ../statistics.c:213
-++#, c-format
-++msgid "%u DSACKs sent for old packets"
-++msgstr ""
-++
-++#: ../statistics.c:214
-++#, c-format
-++msgid "%u DSACKs sent for out of order packets"
-++msgstr ""
-++
-++#: ../statistics.c:215
-++#, fuzzy, c-format
-++msgid "%u DSACKs received"
-++msgstr "%d paquets reçus"
-++
-++#: ../statistics.c:216
-++#, fuzzy, c-format
-++msgid "%u DSACKs for out of order packets received"
-++msgstr "%d paquets totaux reçus"
-++
-++#: ../statistics.c:217
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected SYN"
-++msgstr "%d réinitialisations de connexions reçues"
-++
-++#: ../statistics.c:218
-++#, fuzzy, c-format
-++msgid "%u connections reset due to unexpected data"
-++msgstr "%d réinitialisations de connexions reçues"
-++
-++#: ../statistics.c:219
-++#, fuzzy, c-format
-++msgid "%u connections reset due to early user close"
-++msgstr "%d réinitialisations de connexions reçues"
-++
-++#: ../statistics.c:220
-++#, c-format
-++msgid "%u connections aborted due to memory pressure"
-++msgstr ""
-++
-++#: ../statistics.c:221
-++#, fuzzy, c-format
-++msgid "%u connections aborted due to timeout"
-++msgstr "%d réinitialisations de connexions reçues"
-+ 
-+ #: ../statistics.c:222
-++#, c-format
-++msgid "%u connections aborted after user close in linger timeout"
-++msgstr ""
-++
-++#: ../statistics.c:223
-++#, c-format
-++msgid "%u times unabled to send RST due to no memory"
-++msgstr ""
-++
-++#: ../statistics.c:224
-++#, c-format
-++msgid "TCP ran low on memory %u times"
-++msgstr ""
-++
-++#: ../statistics.c:225
-++#, c-format
-++msgid "%u TCP data loss events"
-++msgstr ""
-++
-++#: ../statistics.c:292
-+ msgid "enabled"
-+ msgstr "activée"
-+ 
-+-#: ../statistics.c:222
-++#: ../statistics.c:292
-+ msgid "disabled"
-+ msgstr "désactivée"
-+ 
-+-#: ../statistics.c:272
-+-#, c-format
-+-msgid "unknown title %s\n"
-+-msgstr "titre inconnu %s\n"
-+-
-+-#: ../statistics.c:298
-++#: ../statistics.c:375
-+ msgid "error parsing /proc/net/snmp"
-+ msgstr "erreur d'analyse de /proc/net/snmp"
-+ 
-+-#: ../statistics.c:311
-++#: ../statistics.c:388
-+ msgid "cannot open /proc/net/snmp"
-+ msgstr "ne peut ouvrir /proc/net/snmp"
-+ 
-+@@ -1824,89 +2064,95 @@ msgstr "Type de matériel `%s' pas suppor
-+ msgid "Cannot change line discipline to `%s'.\n"
-+ msgstr "Ne peut changer la discipline de ligne à `%s'.\n"
-+ 
-+-#: ../lib/af.c:145 ../lib/hw.c:148
-++#: ../lib/af.c:153 ../lib/hw.c:161
-+ msgid "UNSPEC"
-+ msgstr "UNSPEC"
-+ 
-+-#: ../lib/af.c:147
-++#: ../lib/af.c:155
-+ msgid "UNIX Domain"
-+ msgstr "Domaine UNIX"
-+ 
-+-#: ../lib/af.c:150
-++#: ../lib/af.c:158
-+ msgid "DARPA Internet"
-+ msgstr "DARPA Internet"
-+ 
-+-#: ../lib/af.c:153
-++#: ../lib/af.c:161
-+ msgid "IPv6"
-+ msgstr "IPv6"
-+ 
-+-#: ../lib/af.c:156 ../lib/hw.c:169
-++#: ../lib/af.c:164 ../lib/hw.c:182
-+ msgid "AMPR AX.25"
-+ msgstr "AMPR AX.25"
-+ 
-+-#: ../lib/af.c:159 ../lib/hw.c:175
-++#: ../lib/af.c:167 ../lib/hw.c:188
-+ msgid "AMPR NET/ROM"
-+ msgstr "AMPR NET/ROM"
-+ 
-+-#: ../lib/af.c:162
-++#: ../lib/af.c:170
-+ msgid "Novell IPX"
-+ msgstr ""
-+ 
-+-#: ../lib/af.c:165
-++#: ../lib/af.c:173
-+ msgid "Appletalk DDP"
-+ msgstr "Appletalk DDP"
-+ 
-+-#: ../lib/af.c:168 ../lib/hw.c:207
-++#: ../lib/af.c:176 ../lib/hw.c:223
-+ msgid "Econet"
-+ msgstr "Econet"
-+ 
-+-#: ../lib/af.c:171 ../lib/hw.c:172
-++#: ../lib/af.c:179
-++msgid "CCITT X.25"
-++msgstr ""
-++
-++#: ../lib/af.c:182 ../lib/hw.c:185
-+ msgid "AMPR ROSE"
-+ msgstr "AMPR ROSE"
-+ 
-+-#: ../lib/af.c:174 ../lib/hw.c:160
-++#: ../lib/af.c:185 ../lib/hw.c:173
-+ msgid "Ash"
-+ msgstr "Ash"
-+ 
-+-#: ../lib/af.c:232
-++#: ../lib/af.c:243
-++#, c-format
-+ msgid "Please don't supply more than one address family.\n"
-+ msgstr "Ne fournissez pas plus d'une famille d'adresses SVP.\n"
-+ 
-+-#: ../lib/af.c:293
-++#: ../lib/af.c:304
-++#, c-format
-+ msgid "Too much address family arguments.\n"
-+ msgstr "Trop d'arguments de familles d'adresses.\n"
-+ 
-+-#: ../lib/af.c:304
-++#: ../lib/af.c:315
-+ #, c-format
-+ msgid "Unknown address family `%s'.\n"
-+ msgstr "Famille d'adresses inconnue `%s'.\n"
-+ 
-+-#: ../lib/arcnet.c:53 ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52
-+-#: ../lib/fddi.c:67 ../lib/hippi.c:68 ../lib/inet.c:244 ../lib/inet.c:259
-+-#: ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78 ../lib/rose.c:71
-+-#: ../lib/rose.c:126 ../lib/unix.c:56 ../lib/unix.c:76
-+-msgid "[NONE SET]"
-+-msgstr "[INDEFINI]"
-+-
-+-#: ../lib/arcnet.c:81 ../lib/arcnet.c:96
-++#: ../lib/arcnet.c:70 ../lib/arcnet.c:85
-+ #, c-format
-+ msgid "in_arcnet(%s): invalid arcnet address!\n"
-+ msgstr "in_arcnet(%s): adresse arcnet invalide !\n"
-+ 
-+-#: ../lib/arcnet.c:108
-++#: ../lib/arcnet.c:97
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing : ignored!\n"
-+ msgstr "in_arcnet(%s): restant : ignoré !\n"
-+ 
-+-#: ../lib/arcnet.c:120
-++#: ../lib/arcnet.c:109
-+ #, c-format
-+ msgid "in_arcnet(%s): trailing junk!\n"
-+ msgstr "in_arcnet(%s): le restant à la poubelle !\n"
-+ 
-+ #: ../lib/ash.c:81
-++#, c-format
-+ msgid "Malformed Ash address"
-+ msgstr "Adresse Ash malformée"
-+ 
-++#: ../lib/ax25.c:75 ../lib/ddp.c:50 ../lib/econet.c:52 ../lib/inet.c:244
-++#: ../lib/inet.c:259 ../lib/inet6.c:129 ../lib/ipx.c:81 ../lib/netrom.c:78
-++#: ../lib/rose.c:71 ../lib/unix.c:56 ../lib/unix.c:76
-++msgid "[NONE SET]"
-++msgstr "[INDEFINI]"
-++
-+ #: ../lib/ax25.c:97 ../lib/netrom.c:100
-+ msgid "Invalid callsign"
-+ msgstr "Signal d'appel invalide"
-+@@ -1916,22 +2162,21 @@ msgid "Callsign too long"
-+ msgstr "Signal d'appel trop long"
-+ 
-+ #: ../lib/ax25_gr.c:47
-++#, c-format
-+ msgid "AX.25 not configured in this system.\n"
-+ msgstr "AX.25 pas configuré sur ce système.\n"
-+ 
-+ #: ../lib/ax25_gr.c:50
-++#, c-format
-+ msgid "Kernel AX.25 routing table\n"
-+ msgstr "Table de routage AX.25 du noyau\n"
-+ 
-+ #. xxx
-+ #: ../lib/ax25_gr.c:51 ../lib/rose_gr.c:55
-++#, c-format
-+ msgid "Destination  Iface    Use\n"
-+ msgstr "Destination  Iface    Utilisation\n"
-+ 
-+-#: ../lib/ddp_gr.c:21
-+-msgid "Routing table for `ddp' not yet supported.\n"
-+-msgstr "Table de routage pour `ddp' pas encore supporté.\n"
-+-
-+ #: ../lib/ether.c:74 ../lib/ether.c:91
-+ #, c-format
-+ msgid "in_ether(%s): invalid ether address!\n"
-+@@ -1947,153 +2192,171 @@ msgstr "in_ether(%s): restant ignoré !\n
-+ msgid "in_ether(%s): trailing junk!\n"
-+ msgstr "in_ether(%s): le restant à la poubelle !\n"
-+ 
-+-#: ../lib/fddi.c:95 ../lib/fddi.c:110
-++#: ../lib/fddi.c:84 ../lib/fddi.c:99
-+ #, c-format
-+ msgid "in_fddi(%s): invalid fddi address!\n"
-+ msgstr "in_fddi(%s): adresse fddi invalide!\n"
-+ 
-+-#: ../lib/fddi.c:122
-++#: ../lib/fddi.c:111
-+ #, c-format
-+ msgid "in_fddi(%s): trailing : ignored!\n"
-+ msgstr "in_fddi(%s): restant ignoré !\n"
-+ 
-+-#: ../lib/fddi.c:134
-++#: ../lib/fddi.c:123
-+ #, c-format
-+ msgid "in_fddi(%s): trailing junk!\n"
-+ msgstr "in_fddi(%s): le restant à la poubelle !\n"
-+ 
-+-#: ../lib/getroute.c:97 ../lib/setroute.c:76
-++#: ../lib/getroute.c:101 ../lib/setroute.c:80
-+ #, c-format
-+ msgid "Address family `%s' not supported.\n"
-+ msgstr "Famille d'adresses `%s' non supportée.\n"
-+ 
-+-#: ../lib/getroute.c:103 ../lib/setroute.c:80
-++#: ../lib/getroute.c:107 ../lib/setroute.c:84
-+ #, c-format
-+ msgid "No routing for address family `%s'.\n"
-+ msgstr "Pas de routage pour la famille d'adresses `%s'.\n"
-+ 
-+-#: ../lib/hippi.c:96 ../lib/hippi.c:111
-++#: ../lib/hippi.c:84 ../lib/hippi.c:99
-+ #, c-format
-+ msgid "in_hippi(%s): invalid hippi address!\n"
-+ msgstr "in_hippi(%s): adresse hippi invalide!\n"
-+ 
-+-#: ../lib/hippi.c:123
-++#: ../lib/hippi.c:111
-+ #, c-format
-+ msgid "in_hippi(%s): trailing : ignored!\n"
-+ msgstr "in_hippi(%s): restant ignoré !\n"
-+ 
-+-#: ../lib/hippi.c:134
-++#: ../lib/hippi.c:122
-+ #, c-format
-+ msgid "in_hippi(%s): trailing junk!\n"
-+ msgstr "in_hippi(%s): le restant à la poubelle !\n"
-+ 
-+-#: ../lib/hw.c:147
-++#: ../lib/hw.c:160
-+ msgid "Local Loopback"
-+ msgstr "Boucle locale"
-+ 
-+-#: ../lib/hw.c:150
-++#: ../lib/hw.c:163
-+ msgid "Serial Line IP"
-+ msgstr "IP ligne série"
-+ 
-+-#: ../lib/hw.c:151
-++#: ../lib/hw.c:164
-+ msgid "VJ Serial Line IP"
-+ msgstr "IP ligne série - VJ "
-+ 
-+-#: ../lib/hw.c:152
-++#: ../lib/hw.c:165
-+ msgid "6-bit Serial Line IP"
-+ msgstr "IP ligne série - 6 bits"
-+ 
-+-#: ../lib/hw.c:153
-++#: ../lib/hw.c:166
-+ msgid "VJ 6-bit Serial Line IP"
-+ msgstr "IP ligne série - 6 bits VJ"
-+ 
-+-#: ../lib/hw.c:154
-++#: ../lib/hw.c:167
-+ msgid "Adaptive Serial Line IP"
-+ msgstr "IP ligne série adaptative"
-+ 
-+-#: ../lib/hw.c:157
-++#: ../lib/hw.c:170
-+ msgid "Ethernet"
-+ msgstr "Ethernet"
-+ 
-+-#: ../lib/hw.c:163
-++#: ../lib/hw.c:176
-+ msgid "Fiber Distributed Data Interface"
-+ msgstr "Fiber Distributed Data Interface"
-+ 
-+-#: ../lib/hw.c:166
-++#: ../lib/hw.c:179
-+ msgid "HIPPI"
-+ msgstr "HIPPI"
-+ 
-+-#: ../lib/hw.c:178
-++#: ../lib/hw.c:191
-++msgid "generic X.25"
-++msgstr ""
-++
-++#: ../lib/hw.c:194
-+ msgid "IPIP Tunnel"
-+ msgstr "IPIP Tunnel"
-+ 
-+-#: ../lib/hw.c:181
-++#: ../lib/hw.c:197
-+ msgid "Point-to-Point Protocol"
-+ msgstr "Protocole Point-à-Point"
-+ 
-+-#: ../lib/hw.c:184
-++#: ../lib/hw.c:200
-+ msgid "(Cisco)-HDLC"
-+ msgstr "(Cisco)-HDLC"
-+ 
-+-#: ../lib/hw.c:185
-++#: ../lib/hw.c:201
-+ msgid "LAPB"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:188
-++#: ../lib/hw.c:204
-+ msgid "ARCnet"
-+ msgstr "ARCnet"
-+ 
-+-#: ../lib/hw.c:191
-++#: ../lib/hw.c:207
-+ msgid "Frame Relay DLCI"
-+ msgstr "Frame Relay DLCI"
-+ 
-+-#: ../lib/hw.c:192
-++#: ../lib/hw.c:208
-+ msgid "Frame Relay Access Device"
-+ msgstr "Périphériue d'accès Frame Relay"
-+ 
-+-#: ../lib/hw.c:195
-++#: ../lib/hw.c:211
-+ msgid "IPv6-in-IPv4"
-+ msgstr "IPv6-dans-IPv4"
-+ 
-+-#: ../lib/hw.c:198
-++#: ../lib/hw.c:214
-+ #, fuzzy
-+ msgid "IrLAP"
-+ msgstr "LAPB"
-+ 
-+-#: ../lib/hw.c:201
-++#: ../lib/hw.c:217
-+ msgid "16/4 Mbps Token Ring"
-+ msgstr ""
-+ 
-+-#: ../lib/hw.c:203
-++#: ../lib/hw.c:219
-+ msgid "16/4 Mbps Token Ring (New)"
-+ msgstr ""
-+ 
-++#: ../lib/hw.c:226
-++msgid "Generic EUI-64"
-++msgstr ""
-++
-+ #: ../lib/inet.c:153 ../lib/inet6.c:79
-+ #, c-format
-+ msgid "rresolve: unsupport address family %d !\n"
-+ msgstr "rresolve: famille d'adresses non suportée %d !\n"
-+ 
-+-#: ../lib/inet6_gr.c:79
-++#: ../lib/inet6.c:131
-++#, fuzzy
-++msgid "[UNKNOWN]"
-++msgstr "INCONNU"
-++
-++#: ../lib/inet6_gr.c:71
-++#, c-format
-+ msgid "INET6 (IPv6) not configured in this system.\n"
-+ msgstr "INET6 (IPv6) pas configuré sur ce système.\n"
-+ 
-+-#: ../lib/inet6_gr.c:82
-++#: ../lib/inet6_gr.c:74
-++#, c-format
-+ msgid "Kernel IPv6 routing table\n"
-+ msgstr "Table de routage IPv6 du noyau\n"
-+ 
-+-#: ../lib/inet6_gr.c:84
-++#: ../lib/inet6_gr.c:76
-++#, c-format
-+ msgid ""
-+-"Destination                                 Next Hop                         "
-+-"       Flags Metric Ref    Use Iface\n"
-++"Destination                                 Next "
-++"Hop                                Flags Metric Ref    Use Iface\n"
-+ msgstr ""
-+-"Destination                                 Prochain Hop                     "
-+-"       Indic Metric Ref    Utilis. Iface\n"
-++"Destination                                 Prochain "
-++"Hop                            Indic Metric Ref    Utilis. Iface\n"
-+ 
-+-#: ../lib/inet6_gr.c:158
-++#: ../lib/inet6_gr.c:150
-++#, c-format
-+ msgid "Kernel IPv6 Neighbour Cache\n"
-+ msgstr "Cache voisin IPv6 du noyau\n"
-+ 
-+-#: ../lib/inet6_gr.c:161
-++#: ../lib/inet6_gr.c:153
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State\n"
-+@@ -2101,39 +2364,45 @@ msgstr ""
-+ "Voisin                                      Adresse MAT       Iface    Indic "
-+ "Ref Etat\n"
-+ 
-+-#: ../lib/inet6_gr.c:165
-++#: ../lib/inet6_gr.c:157
-++#, c-format
-+ msgid ""
-+ "Neighbour                                   HW Address        Iface    Flags "
-+ "Ref State            Stale(sec) Delete(sec)\n"
-+-msgstr ""
-+-"Voisin                                      Adresse MAT       Iface    Indic "
-+-"Ref Etat             Bloqué(sec) Détuit(sec)\n"
-++msgstr "Voisin                                      Adresse MAT       Iface    Indic Ref Etat             Bloqué(sec) Détuit(sec)\n"
-+ 
-+ #: ../lib/inet6_sr.c:46
-++#, c-format
-+ msgid "Usage: inet6_route [-vF] del Target\n"
-+ msgstr "Syntaxe: inet6_route [-vF] del Cible\n"
-+ 
-+ #: ../lib/inet6_sr.c:47
-++#, c-format
-+ msgid "       inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If]\n"
-+ msgstr "       inet6_route [-vF] add Cible [gw Gw] [metric M] [[dev] If]\n"
-+ 
-+ #: ../lib/inet6_sr.c:48
-++#, c-format
-+ msgid "       inet6_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet6_route [-FC] flush      PAS supporté\n"
-+ 
-+-#: ../lib/inet6_sr.c:182
-++#: ../lib/inet6_sr.c:188
-++#, c-format
-+ msgid "Flushing `inet6' routing table not supported\n"
-+ msgstr "Flush de table de routage `inet6' pas supporté\n"
-+ 
-+ #: ../lib/inet_gr.c:50 ../lib/inet_gr.c:220
-++#, c-format
-+ msgid "INET (IPv4) not configured in this system.\n"
-+ msgstr "INET (IPv4) pas configuré sur ce système.\n"
-+ 
-+ #: ../lib/inet_gr.c:53
-++#, c-format
-+ msgid "Kernel IP routing table\n"
-+ msgstr "Table de routage IP du noyau\n"
-+ 
-+ #: ../lib/inet_gr.c:56
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2142,26 +2411,26 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:59
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags   MSS Window  irtt "
-+ "Iface\n"
-+-msgstr ""
-+-"Destination     Passerelle      Genmask         Indic   MSS Fenêtre irtt "
-+-"Iface\n"
-++msgstr "Destination     Passerelle      Genmask         Indic   MSS Fenêtre irtt Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:62
-++#, c-format
-+ msgid ""
-+ "Destination     Gateway         Genmask         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt\n"
-+-msgstr ""
-+-"Destination     Passerelle      Genmask         Indic Metric Ref    Use "
-+-"Iface    MSS  Fenêtre irtt\n"
-++msgstr "Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface    MSS  Fenêtre irtt\n"
-+ 
-+ #: ../lib/inet_gr.c:237
-++#, c-format
-+ msgid "Kernel IP routing cache\n"
-+ msgstr "cache de routage IP du noyau\n"
-+ 
-+ #: ../lib/inet_gr.c:258
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface\n"
-+@@ -2170,30 +2439,28 @@ msgstr ""
-+ "Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:261
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags   MSS Window  irtt "
-+ "Iface\n"
-+-msgstr ""
-+-"Source          Destination     Passerelle      Indic   MSS Fenêtre irtt "
-+-"Iface\n"
-++msgstr "Source          Destination     Passerelle      Indic   MSS Fenêtre irtt Iface\n"
-+ 
-+ #: ../lib/inet_gr.c:266
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  HH  Arp\n"
-+-msgstr ""
-+-"Source          Destination     Passerelle      Indic Metric Ref    Use "
-+-"Iface    MSS  Fenêtre irtt  HH  Arp\n"
-++msgstr "Source          Destination     Passerelle      Indic Metric Ref    Use Iface    MSS  Fenêtre irtt  HH  Arp\n"
-+ 
-+ #: ../lib/inet_gr.c:290
-++#, c-format
-+ msgid ""
-+ "Source          Destination     Gateway         Flags Metric Ref    Use "
-+ "Iface    MSS   Window irtt  TOS HHRef HHUptod     SpecDst\n"
-+-msgstr ""
-+-"Source          Destination     Passerelle      Flags Metric Ref    Use "
-+-"Iface    MSS  Fenêtre irtt  TOS HHRef HHUptod     SpecDst\n"
-++msgstr "Source          Destination     Passerelle      Flags Metric Ref    Use Iface    MSS  Fenêtre irtt  TOS HHRef HHUptod     SpecDst\n"
-+ 
-+-#: ../lib/inet_sr.c:50
-++#: ../lib/inet_sr.c:51
-++#, c-format
-+ msgid ""
-+ "Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+@@ -2201,29 +2468,34 @@ msgstr ""
-+ "Syntaxe: inet_route [-vF] del {-host|-net} Cible[/prefix] [gw Gw] [metric M] "
-+ "[[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:51
-++#: ../lib/inet_sr.c:52
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Cible[/prefix] [gw Gw] [metric M]\n"
-+ 
-+-#: ../lib/inet_sr.c:52
-++#: ../lib/inet_sr.c:53
-++#, c-format
-+ msgid ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ msgstr ""
-+ "                              [netmask N] [mss Mss] [window W] [irtt I]\n"
-+ 
-+-#: ../lib/inet_sr.c:53
-++#: ../lib/inet_sr.c:54
-++#, c-format
-+ msgid "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ msgstr "                              [mod] [dyn] [reinstate] [[dev] If]\n"
-+ 
-+-#: ../lib/inet_sr.c:54
-++#: ../lib/inet_sr.c:55
-++#, c-format
-+ msgid ""
-+ "       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject\n"
-+ msgstr ""
-+ "       inet_route [-vF] add {-host|-net} Cible[/prefix] [metric M] reject\n"
-+ 
-+-#: ../lib/inet_sr.c:55
-++#: ../lib/inet_sr.c:56
-++#, c-format
-+ msgid "       inet_route [-FC] flush      NOT supported\n"
-+ msgstr "       inet_route [-FC] flush      PAS supporté\n"
-+ 
-+@@ -2233,15 +2505,17 @@ msgid "route: %s: cannot use a NETWORK a
-+ msgstr "route: %s: ne peut utiliser un RESEAU comme passerelle!\n"
-+ 
-+ #: ../lib/inet_sr.c:174
-+-#, fuzzy
-++#, fuzzy, c-format
-+ msgid "route: Invalid MSS/MTU.\n"
-+ msgstr "route: MSS invalide.\n"
-+ 
-+ #: ../lib/inet_sr.c:187
-++#, c-format
-+ msgid "route: Invalid window.\n"
-+ msgstr "route: fenêtre invalide.\n"
-+ 
-+ #: ../lib/inet_sr.c:203
-++#, c-format
-+ msgid "route: Invalid initial rtt.\n"
-+ msgstr "route: rtt initial invalide.\n"
-+ 
-+@@ -2256,75 +2530,92 @@ msgid "route: bogus netmask %s\n"
-+ msgstr "route: netmask bogué %s\n"
-+ 
-+ #: ../lib/inet_sr.c:270
-++#, c-format
-+ msgid "route: netmask doesn't match route address\n"
-+ msgstr "route: netmask ne correspond pas à l'adresse de route\n"
-+ 
-+ #: ../lib/inet_sr.c:306
-++#, c-format
-+ msgid "Flushing `inet' routing table not supported\n"
-+ msgstr "Flush de table de routage `inet' pas supporté\n"
-+ 
-+ #: ../lib/inet_sr.c:310
-++#, c-format
-+ msgid "Modifying `inet' routing cache not supported\n"
-+ msgstr "Modification de cache de routage `inet' pas supporté\n"
-+ 
-+ #: ../lib/ipx_gr.c:52
-++#, c-format
-+ msgid "IPX not configured in this system.\n"
-+ msgstr "IPX pas configuré sur ce système.\n"
-+ 
-+ #: ../lib/ipx_gr.c:56
-++#, c-format
-+ msgid "Kernel IPX routing table\n"
-+ msgstr "Table de routage IPX du noyau\n"
-+ 
-+ #. xxx
-+ #: ../lib/ipx_gr.c:57
-++#, c-format
-+ msgid "Destination               Router Net                Router Node\n"
-+ msgstr "Destination               Réseau Routeur            Noeud Routeur\n"
-+ 
-+ #: ../lib/ipx_sr.c:33
-++#, c-format
-+ msgid "IPX: this needs to be written\n"
-+ msgstr "IPX: ceci doit être écrit\n"
-+ 
-+-#: ../lib/masq_info.c:197
-++#: ../lib/masq_info.c:198
-++#, c-format
-+ msgid "IP masquerading entries\n"
-+ msgstr "Entrées IP Masquerade\n"
-+ 
-+-#: ../lib/masq_info.c:200
-++#: ../lib/masq_info.c:201
-++#, c-format
-+ msgid "prot   expire source               destination          ports\n"
-+ msgstr "prot   expire source               destination          ports\n"
-+ 
-+-#: ../lib/masq_info.c:203
-++#: ../lib/masq_info.c:204
-++#, c-format
-+ msgid ""
-+-"prot   expire    initseq delta prevd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta prevd source               "
-++"destination          ports\n"
-+ msgstr ""
-+-"prot   expire    initseq delta precd source               destination        "
-+-"  ports\n"
-++"prot   expire    initseq delta precd source               "
-++"destination          ports\n"
-+ 
-+ #: ../lib/netrom_gr.c:48
-++#, c-format
-+ msgid "NET/ROM not configured in this system.\n"
-+ msgstr "NET/ROM pas configuré sur ce système.\n"
-+ 
-+ #: ../lib/netrom_gr.c:51
-++#, c-format
-+ msgid "Kernel NET/ROM routing table\n"
-+ msgstr "Table de routage NET/ROM du noyau\n"
-+ 
-+ #: ../lib/netrom_gr.c:52
-++#, c-format
-+ msgid "Destination  Mnemonic  Quality  Neighbour  Iface\n"
-+ msgstr "Destination  Mnemoniq  Qualité  Voisin     Iface\n"
-+ 
-+ #: ../lib/netrom_sr.c:34
-++#, c-format
-+ msgid "netrom usage\n"
-+ msgstr "utilisation netrom\n"
-+ 
-+ #: ../lib/netrom_sr.c:44
-++#, c-format
-+ msgid "NET/ROM: this needs to be written\n"
-+ msgstr "NET/ROM: ceci doit être écrit\n"
-+ 
-+ #: ../lib/ppp.c:44
-++#, c-format
-+ msgid "You cannot start PPP with this program.\n"
-+ msgstr "Vous ne pouvez démarrer PPP avec ce programme.\n"
-+ 
-+ #: ../lib/ppp_ac.c:38
-++#, c-format
-+ msgid "Sorry, use pppd!\n"
-+ msgstr "Désolé, utilisez pppd !\n"
-+ 
-+@@ -2333,49 +2624,314 @@ msgid "Node address must be ten digits"
-+ msgstr "L'adresse de noeud doit avoir 10 chiffres"
-+ 
-+ #: ../lib/rose_gr.c:51
-++#, c-format
-+ msgid "ROSE not configured in this system.\n"
-+ msgstr "ROSE pas configuré sur ce système.\n"
-+ 
-+ #: ../lib/rose_gr.c:54
-++#, c-format
-+ msgid "Kernel ROSE routing table\n"
-+ msgstr "Table de routage ROSE du noyau\n"
-+ 
-+-#: ../lib/tr.c:70 ../lib/tr.c:85
-++#: ../lib/tr.c:86 ../lib/tr.c:101
-+ #, c-format
-+ msgid "in_tr(%s): invalid token ring address!\n"
-+ msgstr "in_tr(%s): adresse token-ring invalide !\n"
-+ 
-+-#: ../lib/tr.c:97
-++#: ../lib/tr.c:113
-+ #, c-format
-+ msgid "in_tr(%s): trailing : ignored!\n"
-+ msgstr "in_tr(%s): restant : ignoré !\n"
-+ 
-+-#: ../lib/tr.c:109
-++#: ../lib/tr.c:125
-+ #, c-format
-+ msgid "in_tr(%s): trailing junk!\n"
-+ msgstr "in_tr(%s): restant à la poubelle !\n"
-+ 
-+-#: ../lib/interface.c:124
-++#: ../lib/interface.c:176
-+ #, c-format
-+ msgid "warning: no inet socket available: %s\n"
-+ msgstr "attention: pas de socket inet disponible: %s\n"
-+ 
-+-#: ../lib/interface.c:270
-++#: ../lib/interface.c:325
-+ #, c-format
-+ msgid "Warning: cannot open %s (%s). Limited output.\n"
-+ msgstr ""
-+ 
-+ #. Give better error message for this case.
-+-#: ../lib/interface.c:504
-++#: ../lib/interface.c:571
-+ msgid "Device not found"
-+ msgstr "Périphérique non trouvé"
-+ 
-+-#: ../lib/interface.c:508
-++#: ../lib/interface.c:575
-+ #, c-format
-+ msgid "%s: error fetching interface information: %s\n"
-+ msgstr "%s: erreur lors de la recherche d'infos sur l'interface: %s\n"
-+ 
-+-#: ../lib/sockets.c:59
-++#: ../lib/interface.c:608
-++msgid "     - no statistics available -"
-++msgstr ""
-++
-++#: ../lib/interface.c:612
-++#, c-format
-++msgid "[NO FLAGS]"
-++msgstr "[PAS INDICATEURS]"
-++
-++#: ../lib/interface.c:688
-++#, c-format
-++msgid "%-9.9s Link encap:%s  "
-++msgstr "%-9.9s Lien encap:%s  "
-++
-++#: ../lib/interface.c:693
-++#, c-format
-++msgid "HWaddr %s  "
-++msgstr "HWaddr %s  "
-++
-++#: ../lib/interface.c:696
-++#, c-format
-++msgid "Media:%s"
-++msgstr "Media:%s"
-++
-++#: ../lib/interface.c:698
-++#, c-format
-++msgid "(auto)"
-++msgstr "(auto)"
-++
-++#: ../lib/interface.c:705
-++#, c-format
-++msgid "          %s addr:%s "
-++msgstr "          %s adr:%s "
-++
-++#: ../lib/interface.c:708
-++#, c-format
-++msgid " P-t-P:%s "
-++msgstr " P-t-P:%s "
-++
-++#: ../lib/interface.c:711
-++#, c-format
-++msgid " Bcast:%s "
-++msgstr " Bcast:%s "
-++
-++#: ../lib/interface.c:713
-++#, c-format
-++msgid " Mask:%s\n"
-++msgstr " Masque:%s\n"
-++
-++#: ../lib/interface.c:730
-++#, c-format
-++msgid "          inet6 addr: %s/%d"
-++msgstr "          adr inet6: %s/%d"
-++
-++#: ../lib/interface.c:732
-++#, c-format
-++msgid " Scope:"
-++msgstr " Scope:"
-++
-++#: ../lib/interface.c:735
-++#, c-format
-++msgid "Global"
-++msgstr "Global"
-++
-++#: ../lib/interface.c:738
-++#, c-format
-++msgid "Link"
-++msgstr "Lien"
-++
-++#: ../lib/interface.c:741
-++#, c-format
-++msgid "Site"
-++msgstr "Site"
-++
-++#: ../lib/interface.c:744
-++#, c-format
-++msgid "Compat"
-++msgstr "Compat"
-++
-++#: ../lib/interface.c:747
-++#, c-format
-++msgid "Host"
-++msgstr "Hôte"
-++
-++#: ../lib/interface.c:750
-++#, c-format
-++msgid "Unknown"
-++msgstr "Inconnu"
-++
-++#: ../lib/interface.c:765
-++#, c-format
-++msgid "          IPX/Ethernet II addr:%s\n"
-++msgstr "          adr IPX/Ethernet II:%s\n"
-++
-++#: ../lib/interface.c:768
-++#, c-format
-++msgid "          IPX/Ethernet SNAP addr:%s\n"
-++msgstr "          adr IPX/Ethernet SNAP:%s\n"
-++
-++#: ../lib/interface.c:771
-++#, c-format
-++msgid "          IPX/Ethernet 802.2 addr:%s\n"
-++msgstr "          adr IPX/Ethernet 802.2:%s\n"
-++
-++#: ../lib/interface.c:774
-++#, c-format
-++msgid "          IPX/Ethernet 802.3 addr:%s\n"
-++msgstr "          adr IPX/Ethernet 802.3:%s\n"
-++
-++#: ../lib/interface.c:784
-++#, c-format
-++msgid "          EtherTalk Phase 2 addr:%s\n"
-++msgstr "          adr EtherTalk Phase 2:%s\n"
-++
-++#: ../lib/interface.c:793
-++#, c-format
-++msgid "          econet addr:%s\n"
-++msgstr "          adr econet:%s\n"
-++
-++#: ../lib/interface.c:800
-++#, c-format
-++msgid "[NO FLAGS] "
-++msgstr "[PAS INDICATEURS] "
-++
-++#: ../lib/interface.c:802
-++#, c-format
-++msgid "UP "
-++msgstr "UP "
-++
-++#: ../lib/interface.c:804
-++#, c-format
-++msgid "BROADCAST "
-++msgstr "BROADCAST "
-++
-++#: ../lib/interface.c:806
-++#, c-format
-++msgid "DEBUG "
-++msgstr "DEBUG "
-++
-++#: ../lib/interface.c:808
-++#, c-format
-++msgid "LOOPBACK "
-++msgstr "LOOPBACK "
-++
-++#: ../lib/interface.c:810
-++#, c-format
-++msgid "POINTOPOINT "
-++msgstr "POINTOPOINT "
-++
-++#: ../lib/interface.c:812
-++#, c-format
-++msgid "NOTRAILERS "
-++msgstr "NOTRAILERS "
-++
-++#: ../lib/interface.c:814
-++#, c-format
-++msgid "RUNNING "
-++msgstr "RUNNING "
-++
-++#: ../lib/interface.c:816
-++#, c-format
-++msgid "NOARP "
-++msgstr "NOARP "
-++
-++#: ../lib/interface.c:818
-++#, c-format
-++msgid "PROMISC "
-++msgstr "PROMISC "
-++
-++#: ../lib/interface.c:820
-++#, c-format
-++msgid "ALLMULTI "
-++msgstr "ALLMULTI "
-++
-++#: ../lib/interface.c:822
-++#, c-format
-++msgid "SLAVE "
-++msgstr "SLAVE "
-++
-++#: ../lib/interface.c:824
-++#, c-format
-++msgid "MASTER "
-++msgstr "MASTER "
-++
-++#: ../lib/interface.c:826
-++#, c-format
-++msgid "MULTICAST "
-++msgstr "MULTICAST "
-++
-++#: ../lib/interface.c:829
-++#, c-format
-++msgid "DYNAMIC "
-++msgstr "DYNAMIC "
-++
-++#. DONT FORGET TO ADD THE FLAGS IN ife_print_short
-++#: ../lib/interface.c:832
-++#, c-format
-++msgid " MTU:%d  Metric:%d"
-++msgstr " MTU:%d  Metric:%d"
-++
-++#: ../lib/interface.c:836
-++#, c-format
-++msgid "  Outfill:%d  Keepalive:%d"
-++msgstr "  Outfill:%d  Keepalive:%d"
-++
-++#: ../lib/interface.c:850
-++#, fuzzy, c-format
-++msgid "RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu\n"
-++msgstr "Paquets Reçus:%lu erreurs:%lu jetés:%lu débordements:%lu trames:%lu\n"
-++
-++#: ../lib/interface.c:855
-++#, c-format
-++msgid "             compressed:%lu\n"
-++msgstr "             compressés:%lu\n"
-++
-++#: ../lib/interface.c:895
-++#, fuzzy, c-format
-++msgid "TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu\n"
-++msgstr "Paquets transmis:%lu erreurs:%lu jetés:%lu débordements:%lu carrier:%lu\n"
-++
-++#: ../lib/interface.c:899
-++#, c-format
-++msgid "          collisions:%lu "
-++msgstr "          collisions:%lu "
-++
-++#: ../lib/interface.c:901
-++#, c-format
-++msgid "compressed:%lu "
-++msgstr "compressés:%lu "
-++
-++#: ../lib/interface.c:903
-++#, c-format
-++msgid "txqueuelen:%d "
-++msgstr "lg file transmission:%d "
-++
-++#: ../lib/interface.c:905
-++#, c-format
-++msgid "RX bytes:%llu (%lu.%lu %s)  TX bytes:%llu (%lu.%lu %s)\n"
-++msgstr ""
-++
-++#: ../lib/interface.c:916
-++#, c-format
-++msgid "Interrupt:%d "
-++msgstr "Interruption:%d "
-++
-++#. Only print devices using it for
-++#. I/O maps
-++#: ../lib/interface.c:919
-++#, c-format
-++msgid "Base address:0x%x "
-++msgstr "Adresse de base:0x%x "
-++
-++#: ../lib/interface.c:921
-++#, c-format
-++msgid "Memory:%lx-%lx "
-++msgstr "Mémoire:%lx-%lx "
-++
-++#: ../lib/interface.c:924
-++#, c-format
-++msgid "DMA chan:%x "
-++msgstr "Canal DMA:%x "
-++
-++#: ../lib/sockets.c:63
-++#, c-format
-+ msgid "No usable address families found.\n"
-+ msgstr "Pas de famille d'adresses utilisable trouvée.\n"
-+ 
-+@@ -2399,29 +2955,32 @@ msgstr "ip: %s est une adresse IPv4 inva
-+ msgid "ip: argument is wrong: %s\n"
-+ msgstr "ip: argument incorrect: %s\n"
-+ 
-+-#: ../ipmaddr.c:56
-++#: ../ipmaddr.c:61
-++#, c-format
-+ msgid "Usage: ipmaddr [ add | del ] MULTIADDR dev STRING\n"
-+ msgstr "Syntaxe: ipmaddr [ add | del ] MULTIADR dev CHAINE\n"
-+ 
-+-#: ../ipmaddr.c:57
-++#: ../ipmaddr.c:62
-++#, c-format
-+ msgid "       ipmaddr show [ dev STRING ] [ ipv4 | ipv6 | link | all ]\n"
-+ msgstr "       ipmaddr show [ dev CHAINE ] [ ipv4 | ipv6 | link | all ]\n"
-+ 
-+-#: ../ipmaddr.c:58
-++#: ../ipmaddr.c:63
-++#, c-format
-+ msgid "       ipmaddr -V | -version\n"
-+ msgstr ""
-+ 
-+-#: ../ipmaddr.c:258
-++#: ../ipmaddr.c:263
-+ #, c-format
-+ msgid "family %d "
-+ msgstr ""
-+ 
-+-#: ../ipmaddr.c:267
-++#: ../ipmaddr.c:272
-+ #, c-format
-+ msgid " users %d"
-+ msgstr ""
-+ 
-+-#: ../ipmaddr.c:353
-++#: ../ipmaddr.c:358
-+ msgid "Cannot create socket"
-+ msgstr "Ne peut créer une socket"
-+ 
-+@@ -2436,6 +2995,7 @@ msgid "slattach: tty_lock: (%s): %s\n"
-+ msgstr ""
-+ 
-+ #: ../slattach.c:192
-++#, fuzzy, c-format
-+ msgid "slattach: cannot write PID file\n"
-+ msgstr "slattach: tty_lock: (%s): %s\n"
-+ 
-+@@ -2454,59 +3014,88 @@ msgstr "slattach: tty_hangup(DROP): %s\n
-+ msgid "slattach: tty_hangup(RAISE): %s\n"
-+ msgstr "slattach: tty_hangup(RAISE): %s\n"
-+ 
-+-#: ../slattach.c:486
-++#: ../slattach.c:468
-++#, fuzzy, c-format
-++msgid "slattach: tty name too long\n"
-++msgstr "%s: nom trop long\n"
-++
-++#: ../slattach.c:498
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current state!\n"
-+ msgstr "slattach: tty_open: ne peut obtenir l'état courant !\n"
-+ 
-+-#: ../slattach.c:493
-++#: ../slattach.c:505
-++#, c-format
-+ msgid "slattach: tty_open: cannot get current line disc!\n"
-+ msgstr ""
-+ "slattach: tty_open: ne peut obtenir la discipline de ligne actuelle !\n"
-+ 
-+-#: ../slattach.c:501
-++#: ../slattach.c:513
-++#, c-format
-+ msgid "slattach: tty_open: cannot set RAW mode!\n"
-+ msgstr "slattach: tty_open: ne peut activer le mode RAW !\n"
-+ 
-+-#: ../slattach.c:508
-++#: ../slattach.c:520
-+ #, c-format
-+ msgid "slattach: tty_open: cannot set %s bps!\n"
-+ msgstr "slattach: tty_open: ne peut passer à %s bps!\n"
-+ 
-+-#: ../slattach.c:518
-++#: ../slattach.c:530
-++#, c-format
-+ msgid "slattach: tty_open: cannot set 8N1 mode!\n"
-+ msgstr "slattach: tty_open: ne peut activer le mode 8N1 !\n"
-+ 
-+-#: ../slattach.c:686
-++#: ../slattach.c:672
-++#, c-format
-++msgid "slattach: setvbuf(stdout,0,_IOLBF,0) : %s\n"
-++msgstr ""
-++
-++#: ../slattach.c:704
-+ #, c-format
-+ msgid "%s started"
-+ msgstr ""
-+ 
-+-#: ../slattach.c:687
-++#: ../slattach.c:705
-+ #, c-format
-+ msgid " on %s"
-+ msgstr ""
-+ 
-+-#: ../slattach.c:688
-++#: ../slattach.c:706
-+ #, fuzzy, c-format
-+ msgid " interface %s\n"
-+ msgstr "%s: interface inconnue: %s\n"
-+ 
-+ #~ msgid ""
-+-#~ "   This comand can get or set the hostname or the NIS domainname. You can\n"
-+-#~ msgstr ""
-+-#~ "   Cette commande ne peut obtenir ou définir le nom d'hôte ou le domaine "
-+-#~ "NIS. Vous pouvez\n"
-++#~ "  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  "
-++#~ "<-''-\n"
-++#~ msgstr "  arp [-v]   [<MAT>] [-i <if>] -s  <hôte> <adrmat> [netmask <nm>] pub  <-''-\n"
-++
-++#~ msgid "%s: unknown interface: %s\n"
-++#~ msgstr "%s: interface inconnue: %s\n"
-++
-++#~ msgid "address mask replies"
-++#~ msgstr "réponses de masque d'adresses"
-++
-++#~ msgid "unknown title %s\n"
-++#~ msgstr "titre inconnu %s\n"
-++
-++#~ msgid "Routing table for `ddp' not yet supported.\n"
-++#~ msgstr "Table de routage pour `ddp' pas encore supporté.\n"
-++
-++#~ msgid ""
-++#~ "   This comand can get or set the hostname or the NIS domainname. You "
-++#~ "can\n"
-++#~ msgstr "   Cette commande ne peut obtenir ou définir le nom d'hôte ou le domaine NIS. Vous pouvez\n"
-+ 
-+ #~ msgid ""
-+ #~ "   also get the DNS domain or the FQDN (fully qualified domain name).\n"
-+ #~ msgstr ""
-+-#~ "   aussi obtenir le domaine DNS ou le FQDN (fully qualified domain name).\n"
-++#~ "   aussi obtenir le domaine DNS ou le FQDN (fully qualified domain "
-++#~ "name).\n"
-+ 
-+ #~ msgid ""
-+ #~ "   Unless you are using bind or NIS for host lookups you can change the\n"
-+-#~ msgstr ""
-+-#~ "   Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous "
-+-#~ "pouvez changer le\n"
-++#~ msgstr "   Sauf si vous utilisez bind ou NIS pour les recherches d'hôtes, vous pouvez changer le\n"
-+ 
-+ #~ msgid ""
-+ #~ "   FQDN (Fully Qualified Domain Name) and the DNS domain name (which is\n"
---- net-tools-1.60.orig/debian/patches/CVS-20030911-nameif.c_sync.patch
-+++ net-tools-1.60/debian/patches/CVS-20030911-nameif.c_sync.patch
-@@ -0,0 +1,90 @@
-+Sync with upstream CVS, complete log:
-+
-+Revision 1.4 - Thu Sep 11 03:46:49 2003 UTC by ak
-+Fix off by one in name length checking
-+
-+Revision 1.3 - Thu Mar 6 23:26:52 2003 UTC by ecki
-+Fix Debian Bug#178209, Fix RedHat Bug#85748: nameif segfaults
-+
-+Revision 1.2 - Sun Nov 25 06:55:06 2001 UTC by ecki
-+fixed debian bug#111642 reported by Jonathan Amery <jdamery@pick.ucam.org>
-+(newline missing in nameif usage)
-+
-+Index: net-tools/nameif.c
-+===================================================================
-+--- net-tools.orig/nameif.c
-++++ net-tools/nameif.c
-+@@ -3,7 +3,7 @@
-+  * Writen 2000 by Andi Kleen.
-+  * Subject to the Gnu Public License, version 2.  
-+  * TODO: make it support token ring etc.
-+- * $Id: nameif.c,v 1.1 2000/10/18 17:26:29 ak Exp $
-++ * $Id: nameif.c,v 1.4 2003/09/11 03:46:49 ak Exp $
-+  */ 
-+ #ifndef _GNU_SOURCE 
-+ #define _GNU_SOURCE
-+@@ -117,7 +117,8 @@ int getmac(char *name, unsigned char *ma
-+ }
-+ 
-+ struct change { 
-+-	struct change *next,**pprev;
-++	struct change *next;
-++	int found;
-+ 	char ifname[IFNAMSIZ+1];
-+ 	unsigned char mac[6];
-+ }; 
-+@@ -139,10 +140,7 @@ int addchange(char *p, struct change *ch
-+ 			ch->ifname, pos); 
-+ 	if (parsemac(p,ch->mac) < 0) 
-+ 		complain(_("cannot parse MAC `%s' at %s"), p, pos); 
-+-	if (clist) 
-+-		clist->pprev = &ch->next;
-+ 	ch->next = clist;
-+-	ch->pprev = &clist;
-+ 	clist = ch;
-+ 	return 0; 
-+ }
-+@@ -177,7 +175,7 @@ void readconf(void)
-+ 		if (*p == '\0')
-+ 			continue; 
-+ 		n = strcspn(p, " \t"); 
-+-		if (n > IFNAMSIZ) 
-++		if (n > IFNAMSIZ-1) 
-+ 			complain(_("interface name too long at line %d"), line);  
-+ 		memcpy(ch->ifname, p, n); 
-+ 		ch->ifname[n] = 0; 
-+@@ -200,7 +198,7 @@ struct option lopt[] = { 
-+ 
-+ void usage(void)
-+ {
-+-	fprintf(stderr, _("usage: nameif [-c configurationfile] [-s] {ifname macaddress}")); 
-++	fprintf(stderr, _("usage: nameif [-c configurationfile] [-s] {ifname macaddress}\n")); 
-+ 	exit(1); 
-+ }
-+ 
-+@@ -277,21 +275,21 @@ int main(int ac, char **av) 
-+ 		ch = lookupmac(mac); 
-+ 		if (!ch) 
-+ 			continue;
-+-			
-+-		*ch->pprev = ch->next;
-++		
-++		ch->found = 1;	
-+ 		if (strcmp(p, ch->ifname)) { 
-+ 			if (setname(p, ch->ifname) < 0)  
-+ 				complain(_("cannot change name of %s to %s: %s"),
-+ 						p, ch->ifname, strerror(errno)); 
-+ 		} 
-+-		free(ch);
-+ 	} 
-+ 	fclose(ifh); 
-+ 	
-+ 	while (clist) { 
-+ 		struct change *ch = clist;
-+ 		clist = clist->next;
-+-		warning(_("interface '%s' not found"), ch->ifname); 
-++		if (!ch->found)
-++			warning(_("interface '%s' not found"), ch->ifname); 
-+ 		free(ch); 
-+ 	}
-+ 
---- net-tools-1.60.orig/debian/patches/netstat.c-assorted_changes.patch
-+++ net-tools-1.60/debian/patches/netstat.c-assorted_changes.patch
-@@ -0,0 +1,138 @@
-+Unsyncable patches that are nevertheless already in upstream's CVS in the
-+following revisions:
-+
-+* 1.57: Enable netstat -s for IPv6 (Debian Bug #453859 from Varun Chandramohan)
-+* 1.55: use new page aliged proc_fopen for address families
-+
-+Index: net-tools/netstat.c
-+===================================================================
-+--- net-tools.orig/netstat.c
-++++ net-tools/netstat.c
-+@@ -6,7 +6,7 @@
-+  *              NET-3 Networking Distribution for the LINUX operating
-+  *              system.
-+  *
-+- * Version:     $Id: netstat.c,v 1.54 2007/12/01 18:12:34 ecki Exp $
-++ * Version:     $Id: netstat.c,v 1.55 2007/12/01 19:00:40 ecki Exp $
-+  *
-+  * Authors:     Fred Baumgarten, <dc6iq@insu1.etec.uni-karlsruhe.de>
-+  *              Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-+@@ -94,6 +94,7 @@
-+ #include "sockets.h"
-+ #include "interface.h"
-+ #include "util.h"
-++#include "proc.h"
-+ 
-+ #define PROGNAME_WIDTH 20
-+ 
-+@@ -104,6 +105,8 @@
-+ /* prototypes for statistics.c */
-+ void parsesnmp(int, int, int);
-+ void inittab(void);
-++void parsesnmp6(int, int, int);
-++void inittab6(void);
-+ 
-+ typedef enum {
-+     SS_FREE = 0,		/* not allocated                */
-+@@ -153,7 +156,7 @@ int flag_ver = 0;
-+ FILE *procinfo;
-+ 
-+ #define INFO_GUTS1(file,name,proc)			\
-+-  procinfo = fopen((file), "r");			\
-++  procinfo = proc_fopen((file));			\
-+   if (procinfo == NULL) {				\
-+     if (errno != ENOENT) {				\
-+       perror((file));					\
-+@@ -174,7 +177,7 @@ FILE *procinfo;
-+ #if HAVE_AFINET6
-+ #define INFO_GUTS2(file,proc)				\
-+   lnr = 0;						\
-+-  procinfo = fopen((file), "r");		       	\
-++  procinfo = proc_fopen((file));		       	\
-+   if (procinfo != NULL) {				\
-+     do {						\
-+       if (fgets(buffer, sizeof(buffer), procinfo))	\
-+@@ -454,7 +457,7 @@ static int netrom_info(void)
-+     char buffer[256], dev[16];
-+     int st, vs, vr, sendq, recvq, ret;
-+ 
-+-    f = fopen(_PATH_PROCNET_NR, "r");
-++    f = proc_fopen(_PATH_PROCNET_NR);
-+     if (f == NULL) {
-+ 	if (errno != ENOENT) {
-+ 	    perror(_PATH_PROCNET_NR);
-+@@ -650,7 +653,7 @@ static void igmp_do_one(int lnr, const c
-+ #if HAVE_AFX25
-+ static int x25_info(void)
-+ {
-+-       FILE *f=fopen(_PATH_PROCNET_X25, "r");
-++       FILE *f=proc_fopen(_PATH_PROCNET_X25);
-+        char buffer[256],dev[16];
-+        int st,vs,vr,sendq,recvq,lci;
-+        static char *x25_state[5]=
-+@@ -661,7 +664,7 @@ static int x25_info(void)
-+                "ESTABLISHED",
-+                "RECOVERY"
-+        };
-+-       if(!(f=fopen(_PATH_PROCNET_X25, "r")))
-++       if(!(f=proc_fopen(_PATH_PROCNET_X25)))
-+        {
-+                if (errno != ENOENT) {
-+                        perror(_PATH_PROCNET_X25);
-+@@ -1269,7 +1272,7 @@ static int ax25_info(void)
-+ 	N_("ESTABLISHED"),
-+ 	N_("RECOVERY")
-+     };
-+-    if (!(f = fopen(_PATH_PROCNET_AX25, "r"))) {
-++    if (!(f = proc_fopen(_PATH_PROCNET_AX25))) {
-+ 	if (errno != ENOENT) {
-+ 	    perror(_PATH_PROCNET_AX25);
-+ 	    return (-1);
-+@@ -1365,13 +1368,13 @@ static int ipx_info(void)
-+     unsigned sport = 0, dport = 0;
-+     struct stat s;
-+     
-+-    f = fopen(_PATH_PROCNET_IPX_SOCKET1, "r");
-++    f = proc_fopen(_PATH_PROCNET_IPX_SOCKET1);
-+     if (!f) {
-+         if (errno != ENOENT) {
-+             perror(_PATH_PROCNET_IPX_SOCKET1);
-+             return (-1);
-+         }
-+-        f = fopen(_PATH_PROCNET_IPX_SOCKET2, "r");
-++        f = proc_fopen(_PATH_PROCNET_IPX_SOCKET2);
-+ 
-+         /* We need to check for directory */
-+         if (f) {
-+@@ -1728,9 +1731,28 @@ int main
-+     }
-+ 
-+     if (flag_sta) {
-+-        inittab();
-+-	parsesnmp(flag_raw, flag_tcp, flag_udp);
-+-	exit(0);
-++        char *tmp1, *tmp2;
-++        char buf[256];
-++        if (!afname[0]) {
-++            inittab();
-++            parsesnmp(flag_raw, flag_tcp, flag_udp);
-++        } else {
-++            safe_strncpy(buf, afname, sizeof(buf));
-++            tmp1 = buf;
-++            if ((tmp2 = index(tmp1, ',')))
-++                 printf("Multiple interface\n");
-++            else if(!strncmp(buf,"inet6",5)) {
-++#if HAVE_AFINET6
-++                 inittab6();
-++                 parsesnmp6(flag_raw, flag_tcp, flag_udp);
-++#else
-++                 printf("Address type not supported for stats\n");
-++#endif
-++            }
-++            else
-++                 printf("Address type not supported for stats\n");
-++        }
-++        exit(1);
-+     }
-+     
-+     if (flag_rou) {
diff --git a/source/n/netatalk/doinst.sh b/source/n/netatalk/doinst.sh
index 0f07997d..18ce52e2 100644
--- a/source/n/netatalk/doinst.sh
+++ b/source/n/netatalk/doinst.sh
@@ -18,5 +18,14 @@ if [ -e etc/rc.d/rc.atalk ]; then
 fi
 
 config etc/rc.d/rc.atalk.new
-rm -f etc/rc.d/rc.atalk.new
 
+config etc/netatalk/AppleVolumes.default.new
+config etc/netatalk/AppleVolumes.system.new
+config etc/netatalk/afp_ldap.conf.new
+config etc/netatalk/afpd.conf.new
+config etc/netatalk/afppasswd.new
+config etc/netatalk/atalkd.conf.new
+config etc/netatalk/netatalk.conf.new 
+config etc/netatalk/papd.conf.new
+# Don't need an empty file:
+rm -f etc/netatalk/afppasswd.new
diff --git a/source/n/netatalk/netatalk.SlackBuild b/source/n/netatalk/netatalk.SlackBuild
index 46782510..1311736a 100755
--- a/source/n/netatalk/netatalk.SlackBuild
+++ b/source/n/netatalk/netatalk.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo netatalk-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -70,13 +70,6 @@ find . \
 # Fixup some paths in etc2ps.sh
 zcat $CWD/netatalk.etc2ps.diff.gz | patch -p1 || exit 1
 
-# Allow building without xfs quota support
-zcat $CWD/netatalk.without_xfs.diff.gz | patch -p1 || exit 1
-
-# Disallow transmission of passwords via cleartext and with old version 1 of
-# the Diffie-Hellman protocol
-zcat $CWD/netatalk.afpdconf.diff.gz | patch -p1 || exit 1
-
 autoreconf -vif
 CFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -88,7 +81,7 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --disable-static \
   --with-shadow \
-  --without-xfs \
+  --enable-ddp \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
@@ -117,12 +110,10 @@ zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 ( cd $PKG/etc/netatalk
-  for file in AppleVolumes.default AppleVolumes.system afpd.conf afppasswd atalkd.conf netatalk.conf papd.conf ; do
+  for file in AppleVolumes.default AppleVolumes.system afpd.conf afp_ldap.conf afppasswd atalkd.conf netatalk.conf papd.conf ; do
     mv $file ${file}.new
-    echo "config etc/netatalk/${file}.new" >> $PKG/install/doinst.sh
   done
 )
-echo "rm -f etc/netatalk/afppasswd.new" >> $PKG/install/doinst.sh
 
 mkdir -p $PKG/usr/doc/netatalk-$VERSION
 cp -a \
diff --git a/source/n/netatalk/netatalk.afpdconf.diff b/source/n/netatalk/netatalk.afpdconf.diff
deleted file mode 100644
index b2cf5df6..00000000
--- a/source/n/netatalk/netatalk.afpdconf.diff
+++ /dev/null
@@ -1,10 +0,0 @@
-diff -Nur netatalk-2.0.4.orig/config/afpd.conf.tmpl netatalk-2.0.4.new/config/afpd.conf.tmpl
---- netatalk-2.0.4.orig/config/afpd.conf.tmpl	2009-04-30 04:30:13.000000000 -0500
-+++ netatalk-2.0.4.new/config/afpd.conf.tmpl	2009-05-30 23:19:39.663201236 -0500
-@@ -212,4 +212,5 @@
- #		"special" -notcp -defaultvol <path> -systemvol <path>
- #
- # default:
--# - -transall -uamlist uams_dhx.so,uams_dhx2.so -nosavepassword
-+# Disallow clear-text transmission of passwords and DHX version 1
-+- -transall -uamlist uams_guest.so,uams_dhx2.so -nosavepassword
diff --git a/source/n/netatalk/netatalk.without_xfs.diff b/source/n/netatalk/netatalk.without_xfs.diff
deleted file mode 100644
index 75f97a03..00000000
--- a/source/n/netatalk/netatalk.without_xfs.diff
+++ /dev/null
@@ -1,22 +0,0 @@
-diff -Nur netatalk-2.0.4.orig/configure.in netatalk-2.0.4.new/configure.in
---- netatalk-2.0.4.orig/configure.in	2009-03-29 02:23:20.000000000 -0500
-+++ netatalk-2.0.4.new/configure.in	2009-05-30 23:11:29.556016349 -0500
-@@ -692,6 +692,10 @@
- #		AC_MSG_RESULT([enabling quotactl wrapper])
- #	)
- 
-+AC_ARG_WITH([xfs],
-+       AS_HELP_STRING([--without-xfs], [Build without XFS filesystem quota support]))
-+
-+if test "x$with_xfs" != "xno"; then
-         # For quotas on Linux XFS filesystems
-         
-         # For linux > 2.5.56
-@@ -699,6 +703,7 @@
- 		[AC_CHECK_HEADERS(linux/xqm.h linux/xfs_fs.h)
-         	AC_CHECK_HEADERS(xfs/libxfs.h xfs/xqm.h xfs/xfs_fs.h)]
- 	)
-+fi
- 
- 
- 	dnl ----- as far as I can tell, dbtob always does the wrong thing
diff --git a/source/n/netatalk/rc.atalk.new b/source/n/netatalk/rc.atalk.new
index ce490345..9cb17f00 100644
--- a/source/n/netatalk/rc.atalk.new
+++ b/source/n/netatalk/rc.atalk.new
@@ -1,56 +1,145 @@
+#! /bin/sh
 #
-# AppleTalk daemons. Make sure not to start atalkd in the background:
+# Start/stop the Netatalk daemons.
+#
+# Netatalk daemons.
+# If you use AppleTalk, Make sure not to start atalkd in the background:
 # its data structures must have time to stablize before running the
 # other processes.
 #
 
-netatalk_start() {
-  echo -n 'starting appletalk daemons: '
-  if [ -x /usr/sbin/atalkd ]; then
-    echo -n ' atalkd'
-    /usr/sbin/atalkd
-  fi
-  if [ -x /usr/bin/nbprgstr ]; then
-    echo -n ' nbprgstr'
-    /usr/bin/nbprgstr -p 4 `hostname|sed 's/\..*$//'`:Workstation
-    /usr/bin/nbprgstr -p 4 `hostname|sed 's/\..*$//'`:netatalk
-  fi
-  if [ -x /usr/sbin/papd ]; then
-    echo -n ' papd'
-    /usr/sbin/papd
-  fi
-  if [ -x /usr/sbin/afpd ]; then
-    echo -n ' afpd'
-    /usr/sbin/afpd
-  fi
-  if [ -x /usr/sbin/timelord ]; then
-    echo -n ' timelord'
-    /usr/sbin/timelord
-  fi
-  echo
+#
+# kill the named process(es)
+#
+killproc() {
+	pid=`/usr/bin/ps -e |
+	     /usr/bin/grep $1 |
+	     /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`
+	[ "$pid" != "" ] && kill $pid
 }
 
-netatalk_stop() {
-  killall atalkd nbprgstr papd afpd timelord 2> /dev/null
-}
+# netatalk.conf expects hostname in $HOSTNAME by default
+HOSTNAME=`hostname`
+
+. /etc/netatalk/netatalk.conf
+
+
+#
+# Start the netatalk server processes.
+#
+
+atalk_startup() {
+	echo -n 'starting netatalk daemons: '
+	if [ x"${ATALKD_RUN}" != x"no" ]; then
+		if [ -x /usr/sbin/atalkd ]; then
+			/usr/sbin/atalkd;		echo -n ' atalkd'
+		fi
 
-netatalk_restart() {
-  netatalk_stop
-  sleep 1
-  netatalk_start
+		if [ -x /usr/bin/nbprgstr ]; then
+			/usr/bin/nbprgstr -p 4 "${ATALK_NAME}:Workstation${ATALK_ZONE}";
+			/usr/bin/nbprgstr -p 4 "${ATALK_NAME}:netatalk${ATALK_ZONE}";
+							echo -n ' nbprgstr'
+		fi
+
+		if [ x"${PAPD_RUN}" = x"yes"  -a -x /usr/sbin/papd ]; then
+			/usr/sbin/papd;			echo -n ' papd'
+		fi
+
+		if [ x"${TIMELORD_RUN}" = x"yes"  -a -x /usr/sbin/timelord ]; then
+			/usr/sbin/timelord;		echo -n ' timelord'
+		fi
+	fi
+
+	if [ x"${CNID_METAD_RUN}" = x"yes" -a -x /usr/sbin/cnid_metad ]; then
+        /usr/sbin/cnid_metad $CNID_CONFIG
+        echo -n ' cnid_metad'
+	fi
+
+	if [  x"${AFPD_RUN}" = x"yes" -a -x /usr/sbin/afpd ]; then
+		/usr/sbin/afpd  ${AFPD_UAMLIST} -g ${AFPD_GUEST} \
+               -c ${AFPD_MAX_CLIENTS} -n "${ATALK_NAME}${ATALK_ZONE}";	echo -n ' afpd'
+	fi
+
+	echo '.'
 }
 
+atalk_shutdown() {
+	echo -n 'stopping netatalk daemons:'
+
+	if [ -x /usr/sbin/papd ]; then
+		killproc papd;			echo -n ' papd'
+	fi
+
+	if [ -x /usr/sbin/afpd ]; then
+		killproc afpd;			echo -n ' afpd'
+	fi
+
+	if [ -x /usr/sbin/cnid_metad ]; then
+		killproc cnid_met;		echo -n ' cnid_metad'
+	fi
+
+	if [ -x /usr/sbin/timelord ]; then
+		killproc timelord;		echo -n ' timelord'
+	fi
+
+	# kill atalkd last, since without it the plumbing goes away.
+	if [ -x /usr/sbin/atalkd ]; then
+		killproc atalkd;		echo -n ' atalkd'
+	fi
+	echo '.'
+}
 case "$1" in
+
 'start')
-  netatalk_start
-  ;;
+        if [ x"${ATALK_BGROUND}" = x"yes" ]; then
+            echo -n "Starting netatalk in the background ... "
+            atalk_startup > /dev/null &
+        else
+            atalk_startup
+        fi
+        ;;
+
+#
+# Stop the netatalk server processes.
+#
 'stop')
-  netatalk_stop
-  ;;
+
+	echo -n 'stopping netatalk daemons:'
+
+	if [ -x /usr/sbin/papd ]; then
+		killproc papd;			echo -n ' papd'
+	fi
+
+	if [ -x /usr/sbin/afpd ]; then
+		killproc afpd;			echo -n ' afpd'
+	fi
+
+	if [ -x /usr/sbin/cnid_metad ]; then
+		killproc cnid_met;		echo -n ' cnid_metad'
+	fi
+
+	if [ -x /usr/sbin/timelord ]; then
+		killproc timelord;		echo -n ' timelord'
+	fi
+
+	# kill atalkd last, since without it the plumbing goes away.
+	if [ -x /usr/sbin/atalkd ]; then
+		killproc atalkd;		echo -n ' atalkd'
+	fi
+
+	echo '.'
+	;;
+
 'restart')
-  netatalk_restart
-  ;;
+atalk_shutdown
+atalk_startup
+	;;
+#
+# Usage statement.
+#
+
 *)
-  netatalk_start
+	echo "usage: $0 {start|stop|restart}"
+	exit 1
+	;;
 esac
-
diff --git a/source/n/nettle/nettle.SlackBuild b/source/n/nettle/nettle.SlackBuild
new file mode 100755
index 00000000..599b7a9a
--- /dev/null
+++ b/source/n/nettle/nettle.SlackBuild
@@ -0,0 +1,127 @@
+#!/bin/sh
+
+# Slackware build script for nettle
+
+# Copyright 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=nettle
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?*z || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# There is a "--disable-openssl" flag that shows this for help:
+# "Do not include openssl glue in the benchmark program"
+# Building without that flag does not appear to link any openssl libraries,
+# so I don't see any potential legal implications...  --rworkman
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --infodir=/usr/info \
+  --enable-shared \
+  --build=$ARCH-slackware-linux \
+  || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Do not package static libraries:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.a
+
+# Fix perms on shared objects
+find $PKG/usr/lib${LIBDIRSUFFIX} -type f -name "*.so.*" -exec chmod 0755 {} \;
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/n/nettle/slack-desc b/source/n/nettle/slack-desc
new file mode 100644
index 00000000..159c77de
--- /dev/null
+++ b/source/n/nettle/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+nettle: Nettle (small cryptographic library)
+nettle:
+nettle: Nettle is a cryptographic library that is designed to fit easily in 
+nettle: more or less any context: In crypto toolkits for object-oriented 
+nettle: languages (C++, Python, Pike, ...), in applications like LSH or 
+nettle: GNUPG, or even in kernel space.
+nettle:
+nettle: Homepage: http://www.lysator.liu.se/~nisse/nettle/
+nettle:
+nettle:
+nettle:
diff --git a/source/n/network-scripts/network-scripts.SlackBuild b/source/n/network-scripts/network-scripts.SlackBuild
index 9cd6a4e7..78aa577e 100755
--- a/source/n/network-scripts/network-scripts.SlackBuild
+++ b/source/n/network-scripts/network-scripts.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=network-scripts
-VERSION=${VERSION:-13.0}
+VERSION=${VERSION:-14.00}
 ARCH=noarch
 BUILD=${BUILD:-3}
 
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
index 04afd698..1e115148 100644
--- a/source/n/network-scripts/scripts/netconfig
+++ b/source/n/network-scripts/scripts/netconfig
@@ -69,6 +69,16 @@ GATEWAY="$GATEWAY"
 # when rc.inet1 is called directly.
 DEBUG_ETH_UP="no"
 
+# Example of how to configure a bridge:
+# Note the added "BRNICS" variable which contains a space-separated list
+# of the physical network interfaces you want to add to the bridge.
+#IFNAME[0]="br0"
+#BRNICS[0]="eth0"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="255.255.255.0"
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+
 ## Example config information for wlan0.  Uncomment the lines you need and fill
 ## in your info.  (You may not need all of these for your wireless network)
 #IFNAME[4]="wlan0"
@@ -309,9 +319,14 @@ EOF
  fi
 done
 
+# Write the hostname with domain to /etc/HOSTNAME:
 echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+# Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
+if [ -w etc/NetworkManager/NetworkManager.conf ]; then
+  sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
+fi
 
-dialog --title "SETUP IP ADDRESS FOR '$HOSTNM.$DOMAIN'" \
+dialog --title "CONFIGUATION TYPE FOR '$HOSTNM.$DOMAIN'" \
 --default-item DHCP \
 --menu \
 "Now we need to know how your machine connects to the network.\n\
@@ -319,14 +334,14 @@ If you have an internal network card and an assigned IP address, gateway, \
 and DNS, use the 'static IP' choice to enter these values.  If your IP \
 address is assigned by a DHCP server (commonly used by cable modem and DSL \
 services), select 'DHCP'.  If you do not have a network card, select \
-the 'loopback' choice.  'loopback' is also the correct choice if your \
-only connection to the network will be through a serial modem \
-(with SLIP or PPP), or if you are using a laptop network card (these \
-are configured in /etc/pcmcia/). What type of network connection \
-best describes your machine?" 20 70 3 \
+the 'loopback' choice.  You may also select 'NetworkManager' if you would \
+like to have the NetworkManager daemon automatically handle your wired and \
+wireless network interfaces (this is simple and usually works). \
+Which type of network setup would you like?"  20 70 4 \
 "static IP" "Use a static IP address to configure ethernet" \
 "DHCP" "Use a DHCP server to configure ethernet" \
-"loopback" "Set up a loopback connection (modem or no net)" 2> $TMP/reply
+"loopback" "Set up a loopback connection (modem or no net)" \
+"NetworkManager" "Autoconfigure network using NetworkManager" 2> $TMP/reply
 if [ $? = 1 -o $? = 255 ]; then
   rm -f $TMP/reply
   exit
@@ -348,6 +363,9 @@ below.  If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
   DHCP_HOSTNAME="$NEW_DHCPHOST"
 elif [ "$REPLY" = "loopback" ]; then
   LOOPBACK="yes"
+elif [ "$REPLY" = "NetworkManager" ]; then
+  LOOPBACK="yes"
+  NETWORKMANAGER="yes"
 else
   LOOPBACK="no"
 fi
@@ -554,7 +572,7 @@ You'll have to try to configure the card later by editing \
   fi
 fi
 
-if [ "$LOOPBACK" = "yes" ]; then
+if [ "$LOOPBACK" = "yes" -a ! "$NETWORKMANAGER" = "yes" ]; then
   dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
 system is now configured to use loopback:
 
@@ -563,6 +581,15 @@ Netmask: 255.255.255.0
 
 Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
   RETVAL=$?
+elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
+  dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
+system is now configured to use NetworkManager for
+wired and wireless network management.  To set up wireless networks
+and view status, add the Network Management control panel widget to
+your KDE desktop.
+
+Is this correct?  Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
+  RETVAL=$?
 elif [ "$USE_DHCP" = "" ]; then
   while [ 0 ]; do
     dialog --title "CONFIRM NETWORK SETUP" \
@@ -617,8 +644,16 @@ Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
 fi
 
 if [ "$RETVAL" = "0" ]; then
+  # Write the hostname with domain to /etc/HOSTNAME:
   echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+  # Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
+  if [ -w etc/NetworkManager/NetworkManager.conf ]; then
+    sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
+  fi
   write_config_files
+  if [ "$NETWORKMANAGER" = "yes" -a -r etc/rc.d/rc.networkmanager ]; then
+    chmod 755 etc/rc.d/rc.networkmanager
+  fi
   if [ "$1" = "" ]; then
     dialog --msgbox "Settings accepted.  Basic network configuration is complete." 6 40
   fi
diff --git a/source/n/network-scripts/scripts/rc.inet1 b/source/n/network-scripts/scripts/rc.inet1
index 4e6c7aa0..dc325f47 100644
--- a/source/n/network-scripts/scripts/rc.inet1
+++ b/source/n/network-scripts/scripts/rc.inet1
@@ -72,6 +72,29 @@ lo_down() {
 # INTERFACE FUNCTIONS #
 #######################
 
+# Function to assemble a bridge interface.
+br_open() {
+  # argument is 'i' - the position of this interface in the IFNAME array.
+  /sbin/brctl addbr ${IFNAME[$1]}
+  for BRIF in $(echo ${BRNICS[$1]}); do
+    /sbin/ifconfig $BRIF down
+    /sbin/ifconfig $BRIF 0.0.0.0 promisc up
+    /sbin/brctl addif ${IFNAME[$1]} $BRIF
+  done
+}
+
+# Function to disassemble a bridge interface.
+br_close() {
+  # argument is 'i' - the position of this interface in the IFNAME array.
+  #for BRIF in $(echo ${BRNICS[$1]}); do
+  for BRIF in $(ls --indicator-style=none /sys/class/net/${IFNAME[$1]}/brif/)
+  do
+    /sbin/brctl delif ${IFNAME[$1]} $BRIF
+  done
+  /sbin/ifconfig ${IFNAME[$1]} down
+  /sbin/brctl delbr ${IFNAME[$1]}
+}
+
 # Function to bring up a network interface.  If the interface is
 # already up or does not yet exist (perhaps because the kernel driver
 # is not loaded yet), do nothing.
@@ -82,6 +105,8 @@ if_up() {
     [ "${IFNAME[$i]}" = "${1}" ] && break
     i=$(($i+1))
   done
+  # If the interface is a bridge, then create it first:
+  [ -n "${BRNICS[$i]}" ] && br_open $i
   # If the interface isn't in the kernel yet (but there's an alias for it in
   # modules.conf), then it should be loaded first:
   if ! grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # no interface yet
@@ -92,7 +117,7 @@ if_up() {
   fi
   if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # interface exists
     if ! /sbin/ifconfig | grep -w "${1}" 1>/dev/null || \
-      ! /sbin/ifconfig ${1} | grep "inet addr" 1> /dev/null ; then # interface not up or not configured
+      ! /sbin/ifconfig ${1} | grep -w inet 1> /dev/null ; then # interface not up or not configured
       if [ ! "${HWADDR[$i]}" = "" ]; then # Set hardware address _before_ the interface goes up:
         echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig ${1} hw ether ${HWADDR[$i]}" | $LOGGER
         /sbin/ifconfig ${1} hw ether ${HWADDR[$i]}
@@ -105,6 +130,9 @@ if_up() {
         . /etc/rc.d/rc.wireless ${1} start # Initialize any wireless parameters
       fi
       if [ "${USE_DHCP[$i]}" = "yes" ]; then # use DHCP to bring interface up
+        # Clear DHCP_OPTIONS before adding new options to it:
+        unset DHCP_OPTIONS
+        # Set DHCP_OPTIONS for this interface:
         [ ${DHCP_HOSTNAME[$i]} ] && DHCP_OPTIONS="-h ${DHCP_HOSTNAME[$i]}"
         [ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C resolv.conf"
         [ "${DHCP_KEEPNTP[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C ntp.conf"
@@ -179,6 +207,8 @@ if_down() {
     if [ -x /etc/rc.d/rc.wireless ]; then
       . /etc/rc.d/rc.wireless ${1} stop # Kill wireless daemons if any.
     fi
+    # If the interface is a bridge, then destroy it now:
+    [ -n "${BRNICS[$i]}" ] && br_close $i
   fi
 }
 
diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
index 555210c4..d3798d8b 100644
--- a/source/n/network-scripts/scripts/rc.inet1.conf
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -45,6 +45,16 @@ GATEWAY=""
 # when rc.inet1 is called directly.
 DEBUG_ETH_UP="no"
 
+# Example of how to configure a bridge:
+# Note the added "BRNICS" variable which contains a space-separated list
+# of the physical network interfaces you want to add to the bridge.
+#IFNAME[0]="br0"
+#BRNICS[0]="eth0"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="255.255.255.0"
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+
 ## Example config information for wlan0.  Uncomment the lines you need and fill
 ## in your data.  (You may not need all of these for your wireless network)
 #IFNAME[4]="wlan0"
diff --git a/source/n/network-scripts/scripts/rc.inet2 b/source/n/network-scripts/scripts/rc.inet2
index 232d93ec..4f51a330 100644
--- a/source/n/network-scripts/scripts/rc.inet2
+++ b/source/n/network-scripts/scripts/rc.inet2
@@ -98,7 +98,7 @@ fi
 
 # Start NIS (the Network Information Service):
 if [ -x /etc/rc.d/rc.yp ]; then
-  . /etc/rc.d/rc.yp start
+  /etc/rc.d/rc.yp start
 fi
 
 # Start the NFS server.  Note that for this to work correctly, you'll
diff --git a/source/n/nmap/nmap.SlackBuild b/source/n/nmap/nmap.SlackBuild
index d228e63a..a513a93e 100755
--- a/source/n/nmap/nmap.SlackBuild
+++ b/source/n/nmap/nmap.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,8 +20,8 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=${VERSION:-5.51}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-6.01}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -72,6 +72,8 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
+# --without-nmap-update is needed below to avoid depending on apr and subversion libraries.
+# It's not worth the feature IMHO.
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -79,6 +81,7 @@ CFLAGS="$SLKCFLAGS" \
   --with-liblua=included \
   --mandir=/usr/man \
   --docdir=/usr/doc/nmap-$VERSION \
+  --without-nmap-update \
   --build=$ARCH-slackware-linux
 
 make $NUMJOBS || make || exit 1
diff --git a/source/n/ntp/ntp.SlackBuild b/source/n/ntp/ntp.SlackBuild
index b8d4d363..d89863e7 100755
--- a/source/n/ntp/ntp.SlackBuild
+++ b/source/n/ntp/ntp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 PKGNAM=ntp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -76,6 +76,8 @@ CFLAGS="$SLKCFLAGS" \
   --bindir=/usr/sbin \
   --sbindir=/usr/sbin \
   --mandir=/usr/man \
+  --enable-ipv6 \
+  --with-crypto \
   --program-prefix= \
   --program-suffix= \
   --build=$ARCH-slackware-linux
diff --git a/source/n/obex-data-server/obex-data-server.SlackBuild b/source/n/obex-data-server/obex-data-server.SlackBuild
index e81a071a..030fffc7 100755
--- a/source/n/obex-data-server/obex-data-server.SlackBuild
+++ b/source/n/obex-data-server/obex-data-server.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Copyright 2009  Robby Workman, Northport, Alabama, USA
-# Copyright 2010  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,26 +21,27 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
 PKGNAM=obex-data-server
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -50,11 +51,23 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -76,7 +89,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --sysconfdir=/etc \
   --localstatedir=/var \
   --mandir=/usr/man \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/n/obex-data-server/obex-data-server.url b/source/n/obex-data-server/obex-data-server.url
new file mode 100644
index 00000000..8b6e257c
--- /dev/null
+++ b/source/n/obex-data-server/obex-data-server.url
@@ -0,0 +1 @@
+http://tadas.dailyda.com/software/
diff --git a/source/n/obex-data-server/slack-desc b/source/n/obex-data-server/slack-desc
index 68bd0890..418beba0 100644
--- a/source/n/obex-data-server/slack-desc
+++ b/source/n/obex-data-server/slack-desc
@@ -17,4 +17,3 @@ obex-data-server:
 obex-data-server:
 obex-data-server:
 obex-data-server:
-obex-data-server:
diff --git a/source/n/obexftp/obexftp.SlackBuild b/source/n/obexftp/obexftp.SlackBuild
index c6be7ccc..f7b04522 100755
--- a/source/n/obexftp/obexftp.SlackBuild
+++ b/source/n/obexftp/obexftp.SlackBuild
@@ -22,7 +22,7 @@
 
 PKGNAM=obexftp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-5}
+BUILD=${BUILD:-8}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/n/openldap-client/openldap-client.SlackBuild b/source/n/openldap-client/openldap-client.SlackBuild
index c23e17f4..798536b1 100755
--- a/source/n/openldap-client/openldap-client.SlackBuild
+++ b/source/n/openldap-client/openldap-client.SlackBuild
@@ -24,7 +24,7 @@
 
 
 VERSION=${VERSION:-$(echo openldap-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -89,6 +89,9 @@ make -j4 || exit 1
 make test || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# Fix permissions on shared libraries:
+chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/*.so.*
+
 rm -f $PKG/etc/openldap/ldap.conf.default
 mv $PKG/etc/openldap/ldap.conf $PKG/etc/openldap/ldap.conf.new
 cat << EOF >> $PKG/etc/openldap/ldap.conf.new
diff --git a/source/n/openssh/openssh.SlackBuild b/source/n/openssh/openssh.SlackBuild
index 89a968f9..79109e47 100755
--- a/source/n/openssh/openssh.SlackBuild
+++ b/source/n/openssh/openssh.SlackBuild
@@ -2,7 +2,7 @@
 
 # Copyright 2000 BSDi, Inc. Concord, CA, USA
 # Copyright 2001, 2002, 2003, 2004  Slackware Linux, Inc. Concord, CA, USA
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -78,7 +78,6 @@ CFLAGS="$SLKCFLAGS" \
   --with-md5-passwords \
   --with-tcp-wrappers \
   --with-default-path=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin \
-  --with-ipv4-default \
   --with-privsep-path=/var/empty \
   --with-privsep-user=sshd \
   --build=$ARCH-slackware-linux
diff --git a/source/n/openssl/certwatch b/source/n/openssl/certwatch
index 8fef1509..d52dc3dc 100644
--- a/source/n/openssl/certwatch
+++ b/source/n/openssl/certwatch
@@ -84,6 +84,7 @@ for binary in basename date find grep mail openssl touch ; do
 done
 
 find $CERTDIR -type f -maxdepth 1 | while read certfile ; do
+  if [ "$certfile" != "/etc/ssl/certs/ca-certificates.crt" ]; then
   certfilebase="$(basename "$certfile")"
   inform=PEM
   echo "$certfile" | grep -q -i '\.net$'
@@ -124,5 +125,6 @@ find $CERTDIR -type f -maxdepth 1 | while read certfile ; do
       fi
     fi
   fi
+  fi
 done
 
diff --git a/source/n/openssl/doinst.sh-openssl b/source/n/openssl/doinst.sh-openssl
index c92e6076..8fcf3d1c 100644
--- a/source/n/openssl/doinst.sh-openssl
+++ b/source/n/openssl/doinst.sh-openssl
@@ -19,3 +19,8 @@ fi
 
 config etc/ssl/openssl.cnf.new
 config etc/cron.daily/certwatch.new
+
+# Rehash certificates if the package is upgraded on a running system:
+if [ -x /usr/bin/c_rehash ]; then
+  /usr/bin/c_rehash 1> /dev/null 2> /dev/null
+fi
diff --git a/source/n/openssl/openssl.SlackBuild b/source/n/openssl/openssl.SlackBuild
index f0e55b52..8d5c4a09 100755
--- a/source/n/openssl/openssl.SlackBuild
+++ b/source/n/openssl/openssl.SlackBuild
@@ -2,7 +2,7 @@
 
 # Copyright 2000 BSDi, Inc. Concord, CA, USA
 # Copyright 2001, 2002 Slackware Linux, Inc.  Concord, CA, USA
-# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,7 +27,7 @@
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 
-VERSION=${VERSION:-$(echo openssl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo openssl-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
@@ -45,17 +45,19 @@ PKG2=$TMP/package-ossllibs
 NAME1=openssl-$VERSION-$ARCH-$BUILD
 NAME2=openssl-solibs-$VERSION-$ARCH-$BUILD
 
-NUMJOBS=${NUMJOBS:--j6}
+# Parallel build doesn't link properly.
+#NUMJOBS=${NUMJOBS:--j6}
 
 # So that ls has the right field counts for parsing...
 export LC_ALL=C
 
 cd $TMP
 rm -rf $PKG1 $PKG2 openssl-$VERSION
-tar xvf $CWD/openssl-$VERSION.tar.?z* || exit 1
+
+tar xvf $CWD/openssl-$VERSION.tar.gz || exit 1
 cd openssl-$VERSION
 
-# Use .so.0, not .so.0.9.8:
+# Use .so.1, not .so.1.0.0:
 zcat $CWD/openssl.soname.diff.gz | patch -p1 --backup --verbose --suffix=.orig || exit 1
 if [ "$ARCH" = "i486" ]; then
   # Build with -march=i486 -mtune=i686:
@@ -70,9 +72,9 @@ fi
 # paranoid that they won't run against a different OpenSSL version than
 # what they were compiled against, whether or not the ABI has changed.
 #
-# So, we will use the OPENSSL_VERSION_NUMBER from openssl-0.9.8o unless ABI
+# So, we will use the OPENSSL_VERSION_NUMBER from openssl-1.0.1c unless ABI
 # breakage forces it to change.  Yes, we're finally using this old trick.  :)
-sed -i "s/#define OPENSSL_VERSION_NUMBER.*/\/* Use 0x009080efL (0.9.8o) below to avoid pointlessly breaking the ABI *\/\n#define OPENSSL_VERSION_NUMBER 0x009080efL/g" crypto/opensslv.h || exit 1
+sed -i "s/#define OPENSSL_VERSION_NUMBER.*/\/* Use 0x1000103fL (1.0.1c) below to avoid pointlessly breaking the ABI *\/\n#define OPENSSL_VERSION_NUMBER 0x1000103fL/g" crypto/opensslv.h || exit 1
 
 chown -R root:root .
 mkdir -p $PKG1/usr/doc/openssl-$VERSION
@@ -103,15 +105,12 @@ fi
  no-sse2 \
  shared
 
-make depend || exit 1
+make $NUMJOBS depend || make depend || exit 1
 
 make $NUMJOBS || make || exit 1
 
 make install INSTALL_PREFIX=$PKG1 || exit 1
 
-# Use proper libdir:
-( cd $PKG1/usr; mv lib lib${LIBDIRSUFFIX} )
-
 # Make the .so.? library symlinks:
 ( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.* )
 
@@ -158,6 +157,21 @@ if [ -d $PKG1/usr/man ]; then
   )
 fi
 
+# If there's an openssl0 directory, then build openssl-0 shared libraries for
+# compatibility with programs linked to those:
+if [ -d $CWD/openssl0 ]; then
+  ( cd $CWD/openssl0
+    ./openssl0.build || exit 1
+  ) || exit 1
+  # Don't put these in the openssl package...  openssl-solibs is enough.
+  #mkdir -p $PKG1/lib${LIBDIRSUFFIX}
+  #cp -a $TMP/package-openssl0/usr/lib/lib*.so.?.?.? $PKG1/lib${LIBDIRSUFFIX}
+  #( cd $PKG1/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.?.?.? )
+  mkdir -p $PKG2/lib${LIBDIRSUFFIX}
+  cp -a $TMP/package-openssl0/usr/lib/lib*.so.?.?.? $PKG2/lib${LIBDIRSUFFIX}
+  ( cd $PKG2/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.?.?.? )
+fi
+
 cd $PKG1
 chmod 755 usr/lib${LIBDIRSUFFIX}/pkgconfig
 sed -i -e "s#lib\$#lib${LIBDIRSUFFIX}#" usr/lib${LIBDIRSUFFIX}/pkgconfig/*.pc
diff --git a/source/n/openssl/openssl.optsx86.diff b/source/n/openssl/openssl.optsx86.diff
index a1a289a2..330e5097 100644
--- a/source/n/openssl/openssl.optsx86.diff
+++ b/source/n/openssl/openssl.optsx86.diff
@@ -1,11 +1,11 @@
---- ./Configure.orig	2005-08-02 03:59:42.000000000 -0700
-+++ ./Configure	2005-10-12 20:04:43.000000000 -0700
-@@ -317,7 +317,7 @@
- "linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::linux_ppc32.o::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+--- ./Configure.orig	2012-03-14 17:20:40.000000000 -0500
++++ ./Configure	2012-07-03 18:30:19.962011710 -0500
+@@ -350,7 +350,7 @@
+ "linux-armv4",	"gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
  #### IA-32 targets...
  "linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2 -no_cpprt::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 -"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 +"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -mtune=i686 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
- "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
+ "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out",
  ####
  "linux-generic64","gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
diff --git a/source/n/openssl/openssl.soname.diff b/source/n/openssl/openssl.soname.diff
index f660e93b..308968d9 100644
--- a/source/n/openssl/openssl.soname.diff
+++ b/source/n/openssl/openssl.soname.diff
@@ -5,7 +5,7 @@
  	ALLSYMSFLAGS='-Wl,--whole-archive'; \
  	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
 -	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
-+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB.0"
++	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB.1"
  
  DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
  
diff --git a/source/n/openssl/openssl0/certwatch b/source/n/openssl/openssl0/certwatch
new file mode 100644
index 00000000..8fef1509
--- /dev/null
+++ b/source/n/openssl/openssl0/certwatch
@@ -0,0 +1,128 @@
+#!/bin/sh
+#
+# Will check all certificates stored in $CERTDIR for their expiration date,
+# and will display (if optional "stdout" argument is given), or mail a warning
+# message to $MAILADDR (if script is executed without any parameter
+# - unattended mode suitable for cron execution) for each particular certificate
+# that is about to expire in time less to, or equal to $DAYS after this script
+# has been executed, or if it has already expired.
+# This stupid script (C) 2006,2007 Jan Rafaj
+
+########################## CONFIGURATION SECTION BEGIN #########################
+# Note: all settings are mandatory
+# Warning will be sent if a certificate expires in time <= days given here
+DAYS=7
+# E-mail address where to send warnings
+MAILADDR=root
+# Directory with certificates to check
+CERTDIR=/etc/ssl/certs
+# Directory where to keep state files if this script isnt executed with "stdout"
+STATEDIR=/var/run
+########################### CONFIGURATION SECTION END ##########################
+
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+DAY_IN_SECS=$((60*60*24))
+DATE_CURRENT=$(date '+%s')
+
+usage()
+{
+  echo "Usage: $0 [stdout]"
+  echo
+  echo "Detailed description and configuration is embedded within the script."
+  exit 0
+}
+
+message()
+{
+  cat << EOF
+    WARNING: certificate $certfile
+    is about to expire in time equal to or less than $DAYS days from now on,
+    or has already expired - it might be a good idea to obtain/create new one.
+
+EOF
+}
+
+message_mail()
+{
+  message
+  cat << EOF
+    NOTE: This message is being sent only once.
+
+    A lock-file
+    $STATEDIR/certwatch-mailwarning-sent-$certfilebase
+    has been created, which will prevent this script from mailing you again
+    upon its subsequent executions by crond. You dont need to care about it;
+    the file will be auto-deleted as soon as you'll prolong your certificate.
+EOF
+}
+
+unset stdout
+case $# in
+  0) ;;
+  1) if   [ "$1" = "-h" -o "$1" == "--help" ]; then
+       usage
+     elif [ "$1" = "stdout" ]; then
+       stdout=1
+     else
+       usage
+     fi
+     ;;
+  *) usage ;;
+esac
+
+for dir in $STATEDIR $CERTDIR ; do
+  if [ ! -d $dir ]; then
+    echo "ERROR: directory $dir does not exist"
+    exit 1
+  fi
+done
+for binary in basename date find grep mail openssl touch ; do
+  if [ ! \( -x /usr/bin/$binary -o -x /bin/$binary \) ]; then
+    echo "ERROR: /usr/bin/$binary not found"
+    exit 1
+  fi
+done
+
+find $CERTDIR -type f -maxdepth 1 | while read certfile ; do
+  certfilebase="$(basename "$certfile")"
+  inform=PEM
+  echo "$certfile" | grep -q -i '\.net$'
+  if [ $? -eq 0 ]; then
+    # This is based purely on filename extension, so may give false results.
+    # But lets assume noone uses NET format certs today, ok?
+    continue
+  fi
+  echo "$certfile" | grep -q -i '\.der$'
+  if [ $? -eq 0 -o "$(file "$certfile" | egrep '(ASCII|PEM)')" == "" ]; then
+    inform=DER
+  fi
+  # We wont use '-checkend' since it is not properly documented (as of
+  # OpenSSL 0.9.8e).
+  DATE_CERT_EXPIRES=$(openssl x509 -in "$certfile" -inform $inform -noout -enddate | sed 's/^notAfter=//')
+  DATE_CERT_EXPIRES=$(date -d"$DATE_CERT_EXPIRES" +%s)
+  if [ $(($DATE_CERT_EXPIRES - $DATE_CURRENT)) -le $(($DAYS * $DAY_IN_SECS)) ]
+  then
+    if [ $stdout ]; then
+      message
+    else
+      if [ ! -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
+        subject="$0: certificate $certfile expiration warning"
+        message_mail | mail -r "certwatch@$HOSTNAME" \
+                            -s "$subject" \
+                            $MAILADDR 2>/dev/null
+        # echo "Mail about expiring certificate $certfile sent to $MAILADDR."
+        # echo "If you need to send it again, please remove lock-file"
+        # echo "$STATEDIR/certwatch-mailwarning-sent-$certfilebase ."
+        # echo
+      fi
+      touch $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
+    fi
+  else
+    if [ ! $stdout ]; then
+      if [ -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
+        rm $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
+      fi
+    fi
+  fi
+done
+
diff --git a/source/n/openssl/openssl0/doinst.sh-openssl b/source/n/openssl/openssl0/doinst.sh-openssl
new file mode 100644
index 00000000..c92e6076
--- /dev/null
+++ b/source/n/openssl/openssl0/doinst.sh-openssl
@@ -0,0 +1,21 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# If there is a known buggy certwatch script with no local
+# modifications, just replace it:
+if [ "$(md5sum etc/cron.daily/certwatch 2> /dev/null)" = "32556321806f1850d56cb2ef8384b7a1  etc/cron.daily/certwatch" ]; then
+  cat etc/cron.daily/certwatch.new > etc/cron.daily/certwatch
+  touch -r etc/cron.daily/certwatch.new etc/cron.daily/certwatch
+fi
+
+config etc/ssl/openssl.cnf.new
+config etc/cron.daily/certwatch.new
diff --git a/source/n/openssl/openssl0/doinst.sh-openssl-solibs b/source/n/openssl/openssl0/doinst.sh-openssl-solibs
new file mode 100644
index 00000000..ed4fdfac
--- /dev/null
+++ b/source/n/openssl/openssl0/doinst.sh-openssl-solibs
@@ -0,0 +1,12 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/ssl/openssl.cnf.new
diff --git a/source/n/openssl/openssl0/openssl.SlackBuild b/source/n/openssl/openssl0/openssl.SlackBuild
new file mode 100755
index 00000000..6c4197d5
--- /dev/null
+++ b/source/n/openssl/openssl0/openssl.SlackBuild
@@ -0,0 +1,195 @@
+#!/bin/sh
+
+# Copyright 2000 BSDi, Inc. Concord, CA, USA
+# Copyright 2001, 2002 Slackware Linux, Inc.  Concord, CA, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+VERSION=${VERSION:-$(echo openssl-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+PKG1=$TMP/package-openssl
+PKG2=$TMP/package-ossllibs
+NAME1=openssl-$VERSION-$ARCH-$BUILD
+NAME2=openssl-solibs-$VERSION-$ARCH-$BUILD
+
+NUMJOBS=${NUMJOBS:--j6}
+
+# So that ls has the right field counts for parsing...
+export LC_ALL=C
+
+cd $TMP
+rm -rf $PKG1 $PKG2 openssl-$VERSION
+tar xvf $CWD/openssl-$VERSION.tar.gz || exit 1
+cd openssl-$VERSION
+
+# Use .so.0, not .so.0.9.8:
+zcat $CWD/openssl.soname.diff.gz | patch -p1 --backup --verbose --suffix=.orig || exit 1
+if [ "$ARCH" = "i486" ]; then
+  # Build with -march=i486 -mtune=i686:
+  zcat $CWD/openssl.optsx86.diff.gz | patch -p1 --backup --verbose --suffix=.orig || exit 1
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+fi
+
+# OpenSSL has a (nasty?) habit of bumping the internal version number with
+# every release.  This wouldn't be so bad, but some applications are so
+# paranoid that they won't run against a different OpenSSL version than
+# what they were compiled against, whether or not the ABI has changed.
+#
+# So, we will use the OPENSSL_VERSION_NUMBER from openssl-0.9.8o unless ABI
+# breakage forces it to change.  Yes, we're finally using this old trick.  :)
+sed -i "s/#define OPENSSL_VERSION_NUMBER.*/\/* Use 0x009080efL (0.9.8o) below to avoid pointlessly breaking the ABI *\/\n#define OPENSSL_VERSION_NUMBER 0x009080efL/g" crypto/opensslv.h || exit 1
+
+chown -R root:root .
+mkdir -p $PKG1/usr/doc/openssl-$VERSION
+cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \
+  LICENSE NEWS README README.ENGINE doc $PKG1/usr/doc/openssl-$VERSION
+find $PKG1/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \;
+find $PKG1/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \;
+
+# If there's a CHANGES file, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r CHANGES ]; then
+  DOCSDIR=$(echo $PKG1/usr/doc/*-$VERSION)
+  cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES
+  touch -r CHANGES $DOCSDIR/CHANGES
+fi
+
+# These are the known patent issues with OpenSSL:
+# name   #         expires
+# MDC-2: 4,908,861  2007-03-13, included.  :-)
+# IDEA:  5,214,703  2010-05-25, not included.
+# RC5:   5,724,428  2015-03-03, not included.
+
+./config \
+ --prefix=/usr \
+ --openssldir=/etc/ssl \
+ no-idea \
+ no-rc5 \
+ no-sse2 \
+ shared
+
+make $NUMJOBS depend || make depend || exit 1
+
+make $NUMJOBS || make || exit 1
+
+make install INSTALL_PREFIX=$PKG1 || exit 1
+
+# Use proper libdir:
+( cd $PKG1/usr; mv lib lib${LIBDIRSUFFIX} )
+
+# Make the .so.? library symlinks:
+( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.* )
+
+# Move libraries, as they might be needed by programs that bring a network
+# mounted /usr online:
+
+mkdir $PKG1/lib${LIBDIRSUFFIX}
+( cd $PKG1/usr/lib${LIBDIRSUFFIX}
+  for file in lib*.so.?.* ; do
+    mv $file ../../lib${LIBDIRSUFFIX}
+    ln -sf ../../lib${LIBDIRSUFFIX}/$file .
+  done 
+  cp -a lib*.so.? ../../lib${LIBDIRSUFFIX}
+)
+
+# Add a cron script to warn root if a certificate is going to expire soon:
+mkdir -p $PKG1/etc/cron.daily
+zcat $CWD/certwatch.gz > $PKG1/etc/cron.daily/certwatch.new
+chmod 755 $PKG1/etc/cron.daily/certwatch.new
+
+mv $PKG1/etc/ssl/openssl.cnf $PKG1/etc/ssl/openssl.cnf.new
+
+( cd $PKG1
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mv $PKG1/etc/ssl/man $PKG1/usr
+( cd $PKG1/usr/man/man1 ; mv passwd.1 ssl_passwd.1 )
+( cd $PKG1/usr/man/man3 ; mv rand.3 ssl_rand.3 )
+( cd $PKG1/usr/man/man3 ; mv err.3 ssl_err.3 )
+# Compress and symlink the man pages:
+if [ -d $PKG1/usr/man ]; then
+  ( cd $PKG1/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+cd $PKG1
+chmod 755 usr/lib${LIBDIRSUFFIX}/pkgconfig
+sed -i -e "s#lib\$#lib${LIBDIRSUFFIX}#" usr/lib${LIBDIRSUFFIX}/pkgconfig/*.pc
+mkdir -p install
+zcat $CWD/doinst.sh-openssl.gz > install/doinst.sh
+cat $CWD/slack-desc.openssl > install/slack-desc
+/sbin/makepkg -l y -c n $TMP/${NAME1}.txz
+
+# Make runtime package:
+mkdir -p $PKG2/lib${LIBDIRSUFFIX}
+( cd lib${LIBDIRSUFFIX} ; cp -a lib*.so.* $PKG2/lib${LIBDIRSUFFIX} )
+( cd $PKG2/lib${LIBDIRSUFFIX} ; ldconfig -l * )
+mkdir -p $PKG2/etc
+( cd $PKG2/etc ; cp -a $PKG1/etc/ssl . )
+mkdir -p $PKG2/usr/doc/openssl-$VERSION
+( cd $TMP/openssl-$VERSION
+  cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \
+  LICENSE NEWS README README.ENGINE $PKG2/usr/doc/openssl-$VERSION
+)
+
+# If there's a CHANGES file, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r CHANGES ]; then
+  DOCSDIR=$(echo $PKG2/usr/doc/*-$VERSION)
+  cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES
+  touch -r CHANGES $DOCSDIR/CHANGES
+fi
+
+find $PKG2/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \;
+find $PKG2/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \;
+cd $PKG2
+mkdir -p install
+zcat $CWD/doinst.sh-openssl-solibs.gz > install/doinst.sh
+cat $CWD/slack-desc.openssl-solibs > install/slack-desc
+/sbin/makepkg -l y -c n $TMP/${NAME2}.txz
diff --git a/source/n/openssl/openssl0/openssl.optsx86.diff b/source/n/openssl/openssl0/openssl.optsx86.diff
new file mode 100644
index 00000000..a1a289a2
--- /dev/null
+++ b/source/n/openssl/openssl0/openssl.optsx86.diff
@@ -0,0 +1,11 @@
+--- ./Configure.orig	2005-08-02 03:59:42.000000000 -0700
++++ ./Configure	2005-10-12 20:04:43.000000000 -0700
+@@ -317,7 +317,7 @@
+ "linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::linux_ppc32.o::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+ #### IA-32 targets...
+ "linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2 -no_cpprt::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+-"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
++"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -mtune=i686 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+ "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
+ ####
+ "linux-generic64","gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
diff --git a/source/n/openssl/openssl0/openssl.soname.diff b/source/n/openssl/openssl0/openssl.soname.diff
new file mode 100644
index 00000000..f660e93b
--- /dev/null
+++ b/source/n/openssl/openssl0/openssl.soname.diff
@@ -0,0 +1,11 @@
+--- ./Makefile.shared.orig	2005-06-23 13:47:54.000000000 -0700
++++ ./Makefile.shared	2005-10-12 20:02:28.000000000 -0700
+@@ -151,7 +151,7 @@
+ 	SHLIB_SUFFIX=; \
+ 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+ 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
++	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB.0"
+ 
+ DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
+ 
diff --git a/source/n/openssl/openssl0/openssl0.build b/source/n/openssl/openssl0/openssl0.build
new file mode 100755
index 00000000..262a16a5
--- /dev/null
+++ b/source/n/openssl/openssl0/openssl0.build
@@ -0,0 +1,198 @@
+#!/bin/sh
+
+# Copyright 2000 BSDi, Inc. Concord, CA, USA
+# Copyright 2001, 2002 Slackware Linux, Inc.  Concord, CA, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+VERSION=${VERSION:-$(echo openssl-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+PKG1=$TMP/package-openssl0
+PKG2=$TMP/package-ossllibs
+NAME1=openssl-$VERSION-$ARCH-$BUILD
+NAME2=openssl-solibs-$VERSION-$ARCH-$BUILD
+
+NUMJOBS=${NUMJOBS:--j6}
+
+# So that ls has the right field counts for parsing...
+export LC_ALL=C
+
+cd $TMP
+#rm -rf $PKG1 $PKG2 openssl-$VERSION
+rm -rf $PKG1 openssl-$VERSION
+tar xvf $CWD/openssl-$VERSION.tar.gz || exit 1
+cd openssl-$VERSION
+
+# Use .so.0, not .so.0.9.8:
+zcat $CWD/openssl.soname.diff.gz | patch -p1 --backup --verbose --suffix=.orig || exit 1
+if [ "$ARCH" = "i486" ]; then
+  # Build with -march=i486 -mtune=i686:
+  zcat $CWD/openssl.optsx86.diff.gz | patch -p1 --backup --verbose --suffix=.orig || exit 1
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+fi
+
+# OpenSSL has a (nasty?) habit of bumping the internal version number with
+# every release.  This wouldn't be so bad, but some applications are so
+# paranoid that they won't run against a different OpenSSL version than
+# what they were compiled against, whether or not the ABI has changed.
+#
+# So, we will use the OPENSSL_VERSION_NUMBER from openssl-0.9.8o unless ABI
+# breakage forces it to change.  Yes, we're finally using this old trick.  :)
+sed -i "s/#define OPENSSL_VERSION_NUMBER.*/\/* Use 0x009080efL (0.9.8o) below to avoid pointlessly breaking the ABI *\/\n#define OPENSSL_VERSION_NUMBER 0x009080efL/g" crypto/opensslv.h || exit 1
+
+chown -R root:root .
+mkdir -p $PKG1/usr/doc/openssl-$VERSION
+cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \
+  LICENSE NEWS README README.ENGINE doc $PKG1/usr/doc/openssl-$VERSION
+find $PKG1/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \;
+find $PKG1/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \;
+
+# If there's a CHANGES file, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r CHANGES ]; then
+  DOCSDIR=$(echo $PKG1/usr/doc/*-$VERSION)
+  cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES
+  touch -r CHANGES $DOCSDIR/CHANGES
+fi
+
+# These are the known patent issues with OpenSSL:
+# name   #         expires
+# MDC-2: 4,908,861  2007-03-13, included.  :-)
+# IDEA:  5,214,703  2010-05-25, not included.
+# RC5:   5,724,428  2015-03-03, not included.
+
+./config \
+ --prefix=/usr \
+ --openssldir=/etc/ssl \
+ no-idea \
+ no-rc5 \
+ no-sse2 \
+ shared
+
+make $NUMJOBS depend || make depend || exit 1
+
+make $NUMJOBS || make || exit 1
+
+make install INSTALL_PREFIX=$PKG1 || exit 1
+
+exit 0
+
+# Use proper libdir:
+( cd $PKG1/usr; mv lib lib${LIBDIRSUFFIX} )
+
+# Make the .so.? library symlinks:
+( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.* )
+
+# Move libraries, as they might be needed by programs that bring a network
+# mounted /usr online:
+
+mkdir $PKG1/lib${LIBDIRSUFFIX}
+( cd $PKG1/usr/lib${LIBDIRSUFFIX}
+  for file in lib*.so.?.* ; do
+    mv $file ../../lib${LIBDIRSUFFIX}
+    ln -sf ../../lib${LIBDIRSUFFIX}/$file .
+  done 
+  cp -a lib*.so.? ../../lib${LIBDIRSUFFIX}
+)
+
+# Add a cron script to warn root if a certificate is going to expire soon:
+mkdir -p $PKG1/etc/cron.daily
+zcat $CWD/certwatch.gz > $PKG1/etc/cron.daily/certwatch.new
+chmod 755 $PKG1/etc/cron.daily/certwatch.new
+
+mv $PKG1/etc/ssl/openssl.cnf $PKG1/etc/ssl/openssl.cnf.new
+
+( cd $PKG1
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mv $PKG1/etc/ssl/man $PKG1/usr
+( cd $PKG1/usr/man/man1 ; mv passwd.1 ssl_passwd.1 )
+( cd $PKG1/usr/man/man3 ; mv rand.3 ssl_rand.3 )
+( cd $PKG1/usr/man/man3 ; mv err.3 ssl_err.3 )
+# Compress and symlink the man pages:
+if [ -d $PKG1/usr/man ]; then
+  ( cd $PKG1/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+cd $PKG1
+chmod 755 usr/lib${LIBDIRSUFFIX}/pkgconfig
+sed -i -e "s#lib\$#lib${LIBDIRSUFFIX}#" usr/lib${LIBDIRSUFFIX}/pkgconfig/*.pc
+mkdir -p install
+zcat $CWD/doinst.sh-openssl.gz > install/doinst.sh
+cat $CWD/slack-desc.openssl > install/slack-desc
+/sbin/makepkg -l y -c n $TMP/${NAME1}.txz
+
+# Make runtime package:
+mkdir -p $PKG2/lib${LIBDIRSUFFIX}
+( cd lib${LIBDIRSUFFIX} ; cp -a lib*.so.* $PKG2/lib${LIBDIRSUFFIX} )
+( cd $PKG2/lib${LIBDIRSUFFIX} ; ldconfig -l * )
+mkdir -p $PKG2/etc
+( cd $PKG2/etc ; cp -a $PKG1/etc/ssl . )
+mkdir -p $PKG2/usr/doc/openssl-$VERSION
+( cd $TMP/openssl-$VERSION
+  cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \
+  LICENSE NEWS README README.ENGINE $PKG2/usr/doc/openssl-$VERSION
+)
+
+# If there's a CHANGES file, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r CHANGES ]; then
+  DOCSDIR=$(echo $PKG2/usr/doc/*-$VERSION)
+  cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES
+  touch -r CHANGES $DOCSDIR/CHANGES
+fi
+
+find $PKG2/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \;
+find $PKG2/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \;
+cd $PKG2
+mkdir -p install
+zcat $CWD/doinst.sh-openssl-solibs.gz > install/doinst.sh
+cat $CWD/slack-desc.openssl-solibs > install/slack-desc
+/sbin/makepkg -l y -c n $TMP/${NAME2}.txz
diff --git a/source/n/openssl/openssl0/slack-desc.openssl b/source/n/openssl/openssl0/slack-desc.openssl
new file mode 100644
index 00000000..57227c04
--- /dev/null
+++ b/source/n/openssl/openssl0/slack-desc.openssl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+openssl: openssl (Secure Sockets Layer toolkit)
+openssl:
+openssl: The OpenSSL certificate management tool and the shared libraries that
+openssl: provide various encryption and decryption algorithms and protocols.
+openssl:
+openssl: This product includes software developed by the OpenSSL Project for
+openssl: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
+openssl: includes cryptographic software written by Eric Young
+openssl: (eay@cryptsoft.com).  This product includes software written by Tim
+openssl: Hudson (tjh@cryptsoft.com).
+openssl:
diff --git a/source/n/openssl/openssl0/slack-desc.openssl-solibs b/source/n/openssl/openssl0/slack-desc.openssl-solibs
new file mode 100644
index 00000000..58609e68
--- /dev/null
+++ b/source/n/openssl/openssl0/slack-desc.openssl-solibs
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+openssl-solibs: openssl-solibs (OpenSSL shared libraries)
+openssl-solibs:
+openssl-solibs: These shared libraries provide encryption routines required by
+openssl-solibs: programs such as openssh, bind, sendmail, and many others.
+openssl-solibs:
+openssl-solibs: This product includes software developed by the OpenSSL Project for
+openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
+openssl-solibs: includes cryptographic software written by Eric Young
+openssl-solibs: (eay@cryptsoft.com).  This product includes software written by Tim
+openssl-solibs: Hudson (tjh@cryptsoft.com).
+openssl-solibs:
diff --git a/source/n/openssl/slack-desc.openssl-solibs b/source/n/openssl/slack-desc.openssl-solibs
index f65bf12c..58609e68 100644
--- a/source/n/openssl/slack-desc.openssl-solibs
+++ b/source/n/openssl/slack-desc.openssl-solibs
@@ -9,11 +9,11 @@
 openssl-solibs: openssl-solibs (OpenSSL shared libraries)
 openssl-solibs:
 openssl-solibs: These shared libraries provide encryption routines required by
-openssl-solibs: programs such as openssh.  They are also used by KDE's Konqueror web
-openssl-solibs: browser to provide secure web connections.
+openssl-solibs: programs such as openssh, bind, sendmail, and many others.
 openssl-solibs:
 openssl-solibs: This product includes software developed by the OpenSSL Project for
 openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
 openssl-solibs: includes cryptographic software written by Eric Young
 openssl-solibs: (eay@cryptsoft.com).  This product includes software written by Tim
 openssl-solibs: Hudson (tjh@cryptsoft.com).
+openssl-solibs:
diff --git a/source/n/openvpn/openvpn.SlackBuild b/source/n/openvpn/openvpn.SlackBuild
index f0c78ce7..8477c453 100755
--- a/source/n/openvpn/openvpn.SlackBuild
+++ b/source/n/openvpn/openvpn.SlackBuild
@@ -23,8 +23,8 @@
 
 
 PKGNAM=openvpn
-VERSION=2.1.4
-BUILD=${BUILD:-2}
+VERSION=2.2.2
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/openvpn/slack-desc b/source/n/openvpn/slack-desc
index 4f4af4c4..e73ab2fd 100644
--- a/source/n/openvpn/slack-desc
+++ b/source/n/openvpn/slack-desc
@@ -8,7 +8,7 @@
        |-----handy-ruler------------------------------------------------------|
 openvpn: openvpn (secure IP tunnel daemon)
 openvpn:
-openvpn: OpenVPN is a full-featured SSL VPN which can accomodate a wide range
+openvpn: OpenVPN is a full-featured SSL VPN which can accommodate a wide range
 openvpn: of configurations, including remote access, site-to-site VPNs, WiFi
 openvpn: security, and enterprise-scale remote access with load balancing,
 openvpn: failover, and fine-grained access-controls.
diff --git a/source/n/p11-kit/p11-kit.SlackBuild b/source/n/p11-kit/p11-kit.SlackBuild
new file mode 100755
index 00000000..f7e9efb3
--- /dev/null
+++ b/source/n/p11-kit/p11-kit.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for p11-kit
+
+# Copyright 2011, 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=p11-kit
+VERSION=${VERSION:-0.12}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --build=$ARCH-slackware-linux \
+  || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Create the module dir
+mkdir -p $PKG/etc/pkcs11/modules
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/n/p11-kit/slack-desc b/source/n/p11-kit/slack-desc
new file mode 100644
index 00000000..d5cf1db7
--- /dev/null
+++ b/source/n/p11-kit/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler------------------------------------------------------|
+p11-kit: p11-kit (PKCS#11 toolkit)
+p11-kit:
+p11-kit: p11-kit provides a way to load and enumerate PKCS#11 modules. 
+p11-kit:
+p11-kit: It provides a standard configuration setup for installing PKCS#11 
+p11-kit: modules in such a way that they're discoverable.  It also solves
+p11-kit: problems with coordinating the use of PKCS#11 by different components
+p11-kit: or libraries living in the same process.
+p11-kit:
+p11-kit: Homepage: http://p11-glue.freedesktop.org/p11-kit.html
+p11-kit:
diff --git a/source/n/php/doinst.sh b/source/n/php/doinst.sh
index eda8b0de..2af731e9 100644
--- a/source/n/php/doinst.sh
+++ b/source/n/php/doinst.sh
@@ -3,6 +3,26 @@ if [ ! -r etc/httpd/mod_php.conf ]; then
 elif [ "`cat etc/httpd/mod_php.conf 2> /dev/null`" = "" ]; then
   cp -a etc/httpd/mod_php.conf.example etc/httpd/mod_php.conf
 fi
-if [ ! -r etc/httpd/php.ini ]; then
-   cp -a etc/httpd/php.ini-production etc/httpd/php.ini
+
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+# Keep same perms on rc.php-fpm.new:
+if [ -e etc/rc.d/rc.php-fpm ]; then
+  cp -a etc/rc.d/rc.php-fpm etc/rc.d/rc.php-fpm.new.incoming
+  cat etc/rc.d/rc.php-fpm.new > etc/rc.d/rc.php-fpm.new.incoming
+  mv etc/rc.d/rc.php-fpm.new.incoming etc/rc.d/rc.php-fpm.new
 fi
+config etc/rc.d/rc.php-fpm.new
+cp -a etc/httpd/php.ini-production etc/httpd/php.ini.new
+config etc/httpd/php.ini.new
+cp -a etc/php-fpm.conf.default etc/php-fpm.conf.new
+config etc/php-fpm.conf.new
diff --git a/source/n/php/fetch-php.sh b/source/n/php/fetch-php.sh
index 5833da49..6542c8bb 100755
--- a/source/n/php/fetch-php.sh
+++ b/source/n/php/fetch-php.sh
@@ -1 +1 @@
-lftpget http://us2.php.net/distributions/php-5.3.6.tar.bz2 
+lftpget http://us.php.net/distributions/php-5.4.7.tar.bz2 
diff --git a/source/n/php/php-fpm.conf.diff b/source/n/php/php-fpm.conf.diff
new file mode 100644
index 00000000..e749185b
--- /dev/null
+++ b/source/n/php/php-fpm.conf.diff
@@ -0,0 +1,28 @@
+--- ./sapi/fpm/php-fpm.conf.in.orig	2012-05-20 19:47:53.000000000 +0200
++++ ./sapi/fpm/php-fpm.conf.in	2012-05-21 09:16:32.646276661 +0200
+@@ -12,7 +12,7 @@
+ ; Relative path can also be used. They will be prefixed by:
+ ;  - the global prefix if it's been set (-p arguement)
+ ;  - @prefix@ otherwise
+-;include=etc/fpm.d/*.conf
++;include=etc/php-fpm/*.conf
+ 
+ ;;;;;;;;;;;;;;;;;;
+ ; Global Options ;
+@@ -22,14 +22,14 @@
+ ; Pid file
+ ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
+ ; Default Value: none
+-;pid = run/php-fpm.pid
++pid = run/php-fpm.pid
+ 
+ ; Error log file
+ ; If it's set to "syslog", log is sent to syslogd instead of being written
+ ; in a local file.
+ ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
+ ; Default Value: log/php-fpm.log
+-;error_log = log/php-fpm.log
++error_log = log/php-fpm.log
+ 
+ ; syslog_facility is used to specify what type of program is logging the
+ ; message. This lets syslogd specify that messages from different facilities
diff --git a/source/n/php/php.SlackBuild b/source/n/php/php.SlackBuild
index 7a1fc1fd..e475f824 100755
--- a/source/n/php/php.SlackBuild
+++ b/source/n/php/php.SlackBuild
@@ -3,7 +3,7 @@
 # Build and package mod_php on Slackware.
 # by:  David Cantrell <david@slackware.com>
 # Modified for PHP 4-5 by volkerdi@slackware.com
-# Copyright 2007, 2008, 2009, 2010, 2011  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2008, 2009, 2010, 2011, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,9 +24,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=5.3.6
-ALPINE=2.00
-BUILD=${BUILD:-6}
+VERSION=5.4.7
+ALPINE=2.02
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -71,7 +71,7 @@ if [ -r $IMAPLIBDIR/lib${LIBDIRSUFFIX}/c-client.a ]; then
   sleep 5
 else
   ( cd $CWD/../alpine ; ./alpine.SlackBuild || exit 1 ) || exit 1
-  ( cd $TMP/alpine-${ALPINE}/imap/c-client
+  ( cd $TMP/re-alpine-${ALPINE}/imap/c-client
     strip -g c-client.a
     mkdir -p $IMAPLIBDIR/lib${LIBDIRSUFFIX}
     cp c-client.a $IMAPLIBDIR/lib${LIBDIRSUFFIX}
@@ -126,32 +126,45 @@ find . -name "*.orig" -exec rm {} \;
 # Patch ini files:
 zcat $CWD/php.ini-development.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/php.ini-development.diff.gz | patch -p1 --verbose php.ini-production || exit 1
-zcat $CWD/php.session.save_path.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/php-fpm.conf.diff.gz | patch -p1 --verbose || exit 1
+
+# Install the build folder into /usr/lib$LIBDIRSUFFIX/php/build
+# and adapt phpize accordingly:
+sed -i "s|build$|php/build|" scripts/Makefile.frag
+sed -i "s|build\"$|php/build\"|" scripts/phpize.in
 
 # Generic "kitchen sink" configure function, with as many things as possible (and
 # maybe then some ;-) compiled as shared extensions:
-php_configure() {
 EXTENSION_DIR=/usr/lib${LIBDIRSUFFIX}/php/extensions \
 CFLAGS="$SLKCFLAGS" \
 ./configure \
-  $* \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --with-libdir=lib${LIBDIRSUFFIX} \
+  --localstatedir=/var \
   --sysconfdir=/etc \
-  --disable-safe-mode \
-  --disable-magic-quotes \
-  --enable-zend-multibyte \
+  --datarootdir=/usr/share \
+  --datadir=/usr/share \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --with-apxs2=/usr/bin/apxs \
+  --enable-fpm \
+  --with-fpm-user=apache \
+  --with-fpm-group=apache \
+  --enable-maintainer-zts \
+  --enable-pcntl \
   --enable-mbregex \
   --enable-tokenizer=shared \
   --with-config-file-scan-dir=/etc/php \
   --with-config-file-path=/etc/httpd \
   --enable-mod_charset \
   --with-layout=PHP \
-  --enable-sigchild \
+  --disable-sigchild \
   --enable-xml \
   --with-libxml-dir=/usr \
   --enable-simplexml \
+  --enable-xmlreader=shared \
+  --enable-dom=shared \
   --enable-filter \
   --disable-debug \
   --with-openssl=shared \
@@ -177,7 +190,6 @@ CFLAGS="$SLKCFLAGS" \
   --with-freetype-dir=/usr \
   --with-t1lib=/usr \
   --enable-gd-native-ttf \
-  --enable-gd-jis-conv \
   --with-gettext=shared,/usr \
   --with-gmp=shared,/usr \
   --with-iconv=shared \
@@ -194,14 +206,11 @@ CFLAGS="$SLKCFLAGS" \
   --with-pdo-sqlite=shared,/usr \
   --with-pspell=shared,/usr \
   --with-enchant=shared,/usr \
-  --with-mm=/usr \
   --enable-shmop=shared \
   --with-snmp=shared,/usr \
   --enable-soap=shared \
   --enable-sockets \
-  --with-sqlite=shared \
   --with-sqlite3=shared \
-  --enable-sqlite-utf8 \
   --with-regex=php \
   --enable-sysvmsg \
   --enable-sysvsem \
@@ -210,12 +219,12 @@ CFLAGS="$SLKCFLAGS" \
   --with-xsl=shared,/usr \
   --enable-zip=shared \
   --with-tsrm-pthreads \
+  --enable-intl=shared \
   --enable-shared=yes \
   --enable-static=no \
   --with-gnu-ld \
   --with-pic \
   --build=$ARCH-slackware-linux
-}
 
 # I am told this option is worse than nothing.  :-)
 #  --enable-safe-mode
@@ -223,23 +232,12 @@ CFLAGS="$SLKCFLAGS" \
 # I would recommend *against* and will take no responbility for turning on
 # "safe" mode.
 
-# Make the Apache2 module version of PHP:
-php_configure \
-  --with-apxs2=/usr/sbin/apxs
 make $NUMJOBS || make || exit 1
 make install INSTALL_ROOT=$PKG || exit 1
 
-# Make the CLI/CGI version of PHP:
-make distclean
-php_configure \
-  --enable-pcntl \
-  --enable-sigchild
-make $NUMJOBS || make || exit 1
-mkdir -p $PKG/usr/bin
-cat ./sapi/cli/php > $PKG/usr/bin/php
-cat ./sapi/cgi/php-cgi > $PKG/usr/bin/php-cgi
-chmod 755 $PKG/usr/bin/php
-chmod 755 $PKG/usr/bin/php-cgi
+mkdir -p $PKG/etc/{rc.d,php-fpm}
+cp sapi/fpm/init.d.php-fpm $PKG/etc/rc.d/rc.php-fpm.new
+chmod 644 $PKG/etc/rc.d/rc.php-fpm.new
 
 # PHP (used to) install Pear with some strange permissions.
 chmod 755 $PKG/usr/bin/pear
@@ -249,6 +247,9 @@ chmod 755 $PKG/usr/bin/pear
   rm -rf .channels .depdb .depdblock .filemap .lock .registry
 )
 
+# We do not package static extension libraries:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/php/extensions/*.a
+
 # Fix $PKG/usr/lib/php perms:
 ( cd $PKG/usr/lib${LIBDIRSUFFIX}/php
   find . \
diff --git a/source/n/php/php.ini-development.diff b/source/n/php/php.ini-development.diff
index 49b441e6..8c582e4d 100644
--- a/source/n/php/php.ini-development.diff
+++ b/source/n/php/php.ini-development.diff
@@ -1,6 +1,6 @@
---- ./php.ini-development.orig	2011-02-08 18:25:44.000000000 -0600
-+++ ./php.ini-development	2011-04-01 22:42:50.000000000 -0500
-@@ -938,6 +938,44 @@
+--- ./php.ini-development.orig	2012-07-18 01:19:16.000000000 -0500
++++ ./php.ini-development	2012-08-08 20:06:33.512546116 -0500
+@@ -859,6 +859,46 @@
  ; If you only provide the name of the extension, PHP will look for it in its
  ; default extension directory.
  ;
@@ -15,6 +15,7 @@
 +extension=ctype.so
 +extension=curl.so
 +extension=dba.so
++extension=dom.so
 +extension=enchant.so
 +extension=exif.so
 +extension=ftp.so
@@ -22,6 +23,7 @@
 +extension=gettext.so
 +extension=gmp.so
 +extension=iconv.so
++extension=intl.so
 +extension=ldap.so
 +extension=mbstring.so
 +extension=mysql.so
@@ -34,10 +36,10 @@
 +extension=shmop.so
 +extension=snmp.so
 +extension=soap.so
-+extension=sqlite.so
 +extension=sqlite3.so
 +extension=tokenizer.so
 +extension=wddx.so
++extension=xmlreader.so
 +extension=xsl.so
 +extension=zip.so
 +extension=zlib.so
@@ -45,3 +47,12 @@
  ; Windows Extensions
  ; Note that ODBC support is built in, so no dll is needed for it.
  ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+@@ -1391,7 +1431,7 @@
+ ; where MODE is the octal representation of the mode. Note that this
+ ; does not overwrite the process's umask.
+ ; http://php.net/session.save-path
+-;session.save_path = "/tmp"
++session.save_path = "/var/lib/php"
+ 
+ ; Whether to use cookies.
+ ; http://php.net/session.use-cookies
diff --git a/source/n/php/php.session.save_path.diff b/source/n/php/php.session.save_path.diff
deleted file mode 100644
index 60d6f072..00000000
--- a/source/n/php/php.session.save_path.diff
+++ /dev/null
@@ -1,22 +0,0 @@
---- ./php.ini-development.orig	2011-04-14 14:26:44.551000001 -0500
-+++ ./php.ini-development	2011-04-14 14:38:48.591000954 -0500
-@@ -1506,7 +1506,7 @@
- ; where MODE is the octal representation of the mode. Note that this
- ; does not overwrite the process's umask.
- ; http://php.net/session.save-path
--;session.save_path = "/tmp"
-+session.save_path = "/var/lib/php"
- 
- ; Whether to use cookies.
- ; http://php.net/session.use-cookies
---- ./php.ini-production.orig	2011-04-14 14:26:44.558000001 -0500
-+++ ./php.ini-production	2011-04-14 14:39:09.598999155 -0500
-@@ -1513,7 +1513,7 @@
- ; where MODE is the octal representation of the mode. Note that this
- ; does not overwrite the process's umask.
- ; http://php.net/session.save-path
--;session.save_path = "/tmp"
-+session.save_path = "/var/lib/php"
- 
- ; Whether to use cookies.
- ; http://php.net/session.use-cookies
diff --git a/source/n/pidentd/pidentd.SlackBuild b/source/n/pidentd/pidentd.SlackBuild
index 051fdeb5..2dbd49f4 100755
--- a/source/n/pidentd/pidentd.SlackBuild
+++ b/source/n/pidentd/pidentd.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=3.0.19
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/popa3d/popa3d.SlackBuild b/source/n/popa3d/popa3d.SlackBuild
index fbf88a4f..7f6713cd 100755
--- a/source/n/popa3d/popa3d.SlackBuild
+++ b/source/n/popa3d/popa3d.SlackBuild
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 VERSION=1.0.2
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/proftpd/proftpd.SlackBuild b/source/n/proftpd/proftpd.SlackBuild
index 17b2c908..bce1b00e 100755
--- a/source/n/proftpd/proftpd.SlackBuild
+++ b/source/n/proftpd/proftpd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=1.3.3e
-DIRVER=1.3.3e
-BUILD=${BUILD:-1}
+VERSION=1.3.4a
+DIRVER=1.3.4a
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -81,7 +81,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-ctrls \
   --enable-ipv6 \
   --localstatedir=/var/run \
-  --with-modules=mod_readme:mod_ratio:mod_tls:mod_wrap:mod_ctrls_admin \
+  --with-modules=mod_ban:mod_readme:mod_ratio:mod_tls:mod_wrap:mod_ctrls_admin \
   --build=$ARCH-slackware-linux
 # This caused funny messages about "Quotas off" with every FTP command,
 # and mod_wrap gets a compile error:
@@ -99,6 +99,10 @@ cat $CWD/etc/proftpd.conf > $PKG/etc/proftpd.conf.new
 cat $CWD/etc/ftpusers > $PKG/etc/ftpusers.new
 mkdir -p $PKG/home/ftp
 
+# Directory used by mod_ban:
+mkdir -p $PKG/var/db/proftpd
+chown nobody:nogroup $PKG/var/db/proftpd
+
 gzip -9 $PKG/usr/man/man?/*.?
 
 mkdir -p $PKG/usr/doc/proftpd-$VERSION
diff --git a/source/n/pssh/pssh.SlackBuild b/source/n/pssh/pssh.SlackBuild
index d0870d78..a251d4b9 100755
--- a/source/n/pssh/pssh.SlackBuild
+++ b/source/n/pssh/pssh.SlackBuild
@@ -22,7 +22,7 @@
 
 # required: package "python" version 2.2 or higher installed
 
-VERSION=2.2
+VERSION=2.3.1
 BUILD=1
 
 # Automatically determine the architecture we're building on:
diff --git a/source/n/rt2860-firmware/rt2860-firmware.SlackBuild b/source/n/rt2860-firmware/rt2860-firmware.SlackBuild
deleted file mode 100755
index 280b276f..00000000
--- a/source/n/rt2860-firmware/rt2860-firmware.SlackBuild
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-
-PKGNAM=rt2860-firmware
-VERSION=${VERSION:-26}
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf RT2860_Firmware_V${VERSION}
-unzip $CWD/RT2860_Firmware_V${VERSION}.zip || exit 1
-cd RT2860_Firmware_V${VERSION}
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Install:
-mkdir -p $PKG/lib/firmware
-mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT2860_Firmware_V${VERSION}.txt
-mv * $PKG/lib/firmware
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/rt2860-firmware/slack-desc b/source/n/rt2860-firmware/slack-desc
deleted file mode 100644
index 6cdecaec..00000000
--- a/source/n/rt2860-firmware/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-rt2860-firmware: rt2860-firmware (RT28XX/RT30XX PCI/mPCI/PCIe/CardBus firmware)
-rt2860-firmware:
-rt2860-firmware: This is firmware for PCI, mPCI, PCIe, and Cardbus wireless cards
-rt2860-firmware: using the Ralink RT2760, RT2790, RT2860, RT2890, RT3060, RT3062,
-rt2860-firmware: RT3562, RT2860, RT2760, RT2890, RT2790, and RT3090 wireless chipsets.
-rt2860-firmware:
-rt2860-firmware:
-rt2860-firmware:
-rt2860-firmware:
-rt2860-firmware:
-rt2860-firmware:
diff --git a/source/n/rt2870-firmware/rt2870-firmware.SlackBuild b/source/n/rt2870-firmware/rt2870-firmware.SlackBuild
deleted file mode 100755
index 28542412..00000000
--- a/source/n/rt2870-firmware/rt2870-firmware.SlackBuild
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-
-PKGNAM=rt2870-firmware
-VERSION=${VERSION:-22}
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf RT2870_Firmware_V${VERSION}
-unzip $CWD/RT2870_Firmware_V${VERSION}.zip || exit 1
-cd RT2870_Firmware_V${VERSION}
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 700 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Install:
-mkdir -p $PKG/lib/firmware
-mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT2870_Firmware_V${VERSION}.txt
-mv * $PKG/lib/firmware
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/rt2870-firmware/slack-desc b/source/n/rt2870-firmware/slack-desc
deleted file mode 100644
index 1b01f494..00000000
--- a/source/n/rt2870-firmware/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-rt2870-firmware: rt2870-firmware (RT28XX/RT30XX USB firmware)
-rt2870-firmware:
-rt2870-firmware: This is firmware for USB wireless devices using Ralink RT2870, RT2770,
-rt2870-firmware: RT3572, and RT3070 wireless chipsets.
-rt2870-firmware:
-rt2870-firmware:
-rt2870-firmware:
-rt2870-firmware:
-rt2870-firmware:
-rt2870-firmware:
-rt2870-firmware:
diff --git a/source/n/rt61-firmware/rt61-firmware.SlackBuild b/source/n/rt61-firmware/rt61-firmware.SlackBuild
deleted file mode 100755
index 7734f9ee..00000000
--- a/source/n/rt61-firmware/rt61-firmware.SlackBuild
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-CWD=$(pwd)
-
-PKGNAM=rt61-firmware
-VERSION=${VERSION:-1.2}
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf RT61_Firmware_V${VERSION}
-unzip $CWD/RT61_Firmware_V${VERSION}.zip || exit 1
-cd RT61_Firmware_V${VERSION}
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Install:
-mkdir -p $PKG/lib/firmware
-mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT61_Firmware_V${VERSION}.txt
-mv * $PKG/lib/firmware
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/rt61-firmware/slack-desc b/source/n/rt61-firmware/slack-desc
deleted file mode 100644
index 584771e9..00000000
--- a/source/n/rt61-firmware/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------------|
-rt61-firmware: rt61-firmware (Firmware for Ralink rt61 wireless chips)
-rt61-firmware:
-rt61-firmware: This is firmware for the Ralink rt61 wireless chip.
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
-rt61-firmware:
diff --git a/source/n/rt71w-firmware/rt71w-firmware.SlackBuild b/source/n/rt71w-firmware/rt71w-firmware.SlackBuild
deleted file mode 100755
index 05fae27a..00000000
--- a/source/n/rt71w-firmware/rt71w-firmware.SlackBuild
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=rt71w-firmware
-VERSION=${VERSION:-1.8}
-ARCH=${ARCH:-fw}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf RT71W_Firmware_V${VERSION}
-unzip $CWD/RT71W_Firmware_V${VERSION}.zip || exit 1
-cd RT71W_Firmware_V${VERSION} || exit 1
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Install:
-mkdir -p $PKG/lib/firmware
-mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT71W_Firmware_V${VERSION}.txt
-mv * $PKG/lib/firmware
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/n/rt71w-firmware/slack-desc b/source/n/rt71w-firmware/slack-desc
deleted file mode 100644
index 57fc43e9..00000000
--- a/source/n/rt71w-firmware/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-rt71w-firmware: rt71w-firmware (Firmware for Ralink rt71w wireless chips)
-rt71w-firmware:
-rt71w-firmware: This is firmware for the Ralink rt71w wireless chip.
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
-rt71w-firmware:
diff --git a/source/n/samba/samba.SlackBuild b/source/n/samba/samba.SlackBuild
index b7cbeefd..16db2341 100755
--- a/source/n/samba/samba.SlackBuild
+++ b/source/n/samba/samba.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -101,8 +101,6 @@ CFLAGS="$SLKCFLAGS" \
   --enable-shared=yes \
   --with-acl-support=yes \
   --with-automount \
-  --with-cifsmount \
-  --with-cifsumount \
   --with-quotas \
   --with-syslog \
   --with-utmp \
@@ -137,37 +135,13 @@ cp -a ../nsswitch/libnss_wins.so $PKG/lib${LIBDIRSUFFIX}/libnss_wins.so.2
   ln -sf libnss_wins.so.2 libnss_wins.so
 )
 
-# Install a pkgconfig file for libtalloc:
+# Install pkgconfig files:
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
+cp -a pkgconfig/*.pc $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
 if [ ! -r $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/talloc.pc ]; then
   cat $CWD/talloc.pc | sed -e "s/\/lib/\/lib${LIBDIRSUFFIX}/" > $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/talloc.pc
 fi
 
-## Make sure that other programs can link against libsmbclient:
-#( cd $PKG/usr/lib${LIBDIRSUFFIX}
-#  for FILE in samba/libsmbclient.so* ; do
-#    ln -sf $FILE
-#  done
-#)
-
-# Add some (u)mount links:
-mkdir -p $PKG/sbin
-( cd $PKG/sbin
-  # SMBFS is obsolete in the kernel now -- use mount.cifs
-  #rm -f mount.smbfs ; ln -sf /usr/bin/smbmount mount.smbfs
-  # Add a wrapper script from Debian that's included in the upstream Samba
-  # sources to help out people (like me ;-) who don't read every speck of
-  # documentation:
-  cat $TMP/samba-$VERSION/examples/scripts/mount/mount.smbfs > mount.smbfs
-  chmod 755 $PKG/sbin/mount.smbfs
-  # I suppose this wouldn't be the worst idea in the world, either:
-  ( cd $PKG/usr/bin ; ln -sf /sbin/mount.smbfs smbmount )
-  rm -f mount.cifs ; ln -sf /usr/sbin/mount.cifs mount.cifs
-  # smbumount was giving me problems so it seems wise to play it safe
-  #rm -f umount.smbfs ; ln -sf /usr/bin/smbumount umount.smbfs
-  #rm -f umount.cifs ; ln -sf /usr/sbin/umount.cifs umount.cifs
-)
-
 # Add a sample config file:
 cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample
 
diff --git a/source/n/samba/slack-desc b/source/n/samba/slack-desc
index c06b485d..f4352c60 100644
--- a/source/n/samba/slack-desc
+++ b/source/n/samba/slack-desc
@@ -6,11 +6,11 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-samba: samba (SMB/CIFS file and print server)
+samba: samba (CIFS file and print server)
 samba:
-samba: Samba is an SMB/CIFS file and print server for SMB and CIFS clients.
-samba: It allows you to make file space or printers on a Samba host
-samba: available to SMB/CIFS clients (such as PCs running Windows).
+samba: Samba is a CIFS file and print server for CIFS clients.  It allows
+samba: you to make file space or printers on a Samba host available to CIFS
+samba: clients (such as PCs running Windows).
 samba:
 samba: If you have any Windows file servers, you may be able to replace them
 samba: or supplement them with Samba.  One of Samba's big strengths is
diff --git a/source/n/sendmail/8.14.5.auth2.p0 b/source/n/sendmail/8.14.5.auth2.p0
new file mode 100644
index 00000000..13cdacc7
--- /dev/null
+++ b/source/n/sendmail/8.14.5.auth2.p0
@@ -0,0 +1,23 @@
+--- sendmail.h-	Tue May 24 16:24:39 2011
++++ sendmail.h	Tue May 24 16:25:29 2011
+@@ -721,9 +721,9 @@
+ #if STARTTLS
+ #define MCIF_TLS	0x00100000	/* STARTTLS supported */
+ #define MCIF_TLSACT	0x00200000	/* STARTTLS active */
+-#define MCIF_EXTENS	(MCIF_EXPN | MCIF_SIZE | MCIF_8BITMIME | MCIF_DSN | MCIF_8BITOK | MCIF_AUTH | MCIF_ENHSTAT | MCIF_TLS)
+ #else /* STARTTLS */
+-#define MCIF_EXTENS	(MCIF_EXPN | MCIF_SIZE | MCIF_8BITMIME | MCIF_DSN | MCIF_8BITOK | MCIF_AUTH | MCIF_ENHSTAT)
++#define MCIF_TLS	0
++#define MCIF_TLSACT	0
+ #endif /* STARTTLS */
+ #define MCIF_DLVR_BY	0x00400000	/* DELIVERBY */
+ #if _FFR_IGNORE_EXT_ON_HELO
+@@ -732,6 +732,8 @@
+ #define MCIF_INLONGLINE 0x01000000	/* in the middle of a long line */
+ #define MCIF_AUTH2	0x02000000	/* got 2 AUTH lines */
+ #define MCIF_ONLY_EHLO	0x10000000	/* use only EHLO in smtpinit */
++
++#define MCIF_EXTENS	(MCIF_EXPN | MCIF_SIZE | MCIF_8BITMIME | MCIF_DSN | MCIF_8BITOK | MCIF_AUTH | MCIF_ENHSTAT | MCIF_TLS | MCIF_AUTH2)
+ 
+ /* states */
+ #define MCIS_CLOSED	0		/* no traffic on this connection */
diff --git a/source/n/sendmail/SlackBuild-sendmail b/source/n/sendmail/SlackBuild-sendmail
index aec918ca..17c79a24 100755
--- a/source/n/sendmail/SlackBuild-sendmail
+++ b/source/n/sendmail/SlackBuild-sendmail
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,8 +20,8 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=8.14.4
-BUILD=${BUILD:-1}
+VERSION=8.14.5
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -68,6 +68,11 @@ rm -rf sendmail-$VERSION
 tar xvf $CWD/sendmail.$VERSION.tar.gz || exit 1
 cd sendmail-$VERSION
 
+# Upstream patch to fix broken SMTP AUTH in Sendmail 8.14.5:
+cd sendmail
+cat $CWD/8.14.5.auth2.p0 | patch -p0 --verbose || exit 1
+cd ..
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/n/sendmail/SlackBuild-sendmail-cf b/source/n/sendmail/SlackBuild-sendmail-cf
index d54370b9..e2457041 100755
--- a/source/n/sendmail/SlackBuild-sendmail-cf
+++ b/source/n/sendmail/SlackBuild-sendmail-cf
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,9 +20,9 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=8.14.4
+VERSION=8.14.5
 ARCH=noarch
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
diff --git a/source/n/slrn/slrn.SlackBuild b/source/n/slrn/slrn.SlackBuild
index d983724d..d6f2a8f7 100755
--- a/source/n/slrn/slrn.SlackBuild
+++ b/source/n/slrn/slrn.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=0.9.9p1
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/snownews/snownews.SlackBuild b/source/n/snownews/snownews.SlackBuild
index 724cab54..75bc2875 100755
--- a/source/n/snownews/snownews.SlackBuild
+++ b/source/n/snownews/snownews.SlackBuild
@@ -22,7 +22,7 @@
 
 PKGNAM=snownews
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/tcpdump/tcpdump.SlackBuild b/source/n/tcpdump/tcpdump.SlackBuild
index 1ff4795f..2462d416 100755
--- a/source/n/tcpdump/tcpdump.SlackBuild
+++ b/source/n/tcpdump/tcpdump.SlackBuild
@@ -51,6 +51,10 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf tcpdump-$VERSION
+
+# To (try to) avoid weird errors, take an axe to this:
+rm -rf $TMP/libpcap-?.?.?
+
 tar xvf $CWD/tcpdump-$VERSION.tar.gz || exit 1
 cd tcpdump-$VERSION || exit 1
 find . -type d -name CVS -depth -exec rm -rf {} \;
diff --git a/source/n/telnet/slack-desc b/source/n/telnet/slack-desc
index 89ba84c3..2eb4d62e 100644
--- a/source/n/telnet/slack-desc
+++ b/source/n/telnet/slack-desc
@@ -11,7 +11,7 @@ telnet:
 telnet: telnet supports the original DARPA telnet interactive communication
 telnet: protocol.  As connecting to a telnetd server transmits your password
 telnet: over the network in cleartext, telnet's use as a login protocol has
-telnet: been mostly superceded by the use of ssh and sshd.  However, the
+telnet: been mostly superseded by the use of ssh and sshd.  However, the
 telnet: telnet client is still a very handy tool, and telnetd may still have
 telnet: some uses on networks that are known to be secure.
 telnet:
diff --git a/source/n/vsftpd/vsftpd.SlackBuild b/source/n/vsftpd/vsftpd.SlackBuild
index 93582dbb..9a2e7fc8 100755
--- a/source/n/vsftpd/vsftpd.SlackBuild
+++ b/source/n/vsftpd/vsftpd.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=vsftpd
-VERSION=${VERSION:-$(echo ${PKGNAM}-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo ${PKGNAM}-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -51,7 +51,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP || exit 1
 rm -rf vsftpd-$VERSION
-tar xvf $CWD/vsftpd-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/vsftpd-$VERSION.tar.gz || exit 1
 cd vsftpd-$VERSION || exit 1
 chown -R root:root .
 find . \
diff --git a/source/n/wget/wget.SlackBuild b/source/n/wget/wget.SlackBuild
index e79de18c..6706c161 100755
--- a/source/n/wget/wget.SlackBuild
+++ b/source/n/wget/wget.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-$(echo wget-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo wget-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -56,7 +56,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf wget-$VERSION
-tar xvf $CWD/wget-$VERSION.tar.?z* || exit 1
+tar xvf $CWD/wget-$VERSION.tar.xz || exit 1
 cd wget-$VERSION
 chown -R root:root .
 find . \
@@ -72,6 +72,7 @@ CFLAGS="$SLKCFLAGS" \
   --mandir=/usr/man \
   --infodir=/usr/info \
   --docdir=/usr/doc/wget-$VERSION \
+  --with-ssl=openssl \
   --build=${ARCH}-slackware-linux
 
 make $NUMJOBS || make || exit 1
diff --git a/source/n/whois/whois.SlackBuild b/source/n/whois/whois.SlackBuild
index 4b024015..7a98ac31 100755
--- a/source/n/whois/whois.SlackBuild
+++ b/source/n/whois/whois.SlackBuild
@@ -41,7 +41,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf whois-$VERSION
-tar xvf $CWD/whois_$VERSION.tar.gz || exit 1
+tar xvf $CWD/whois_$VERSION.tar.?z* || exit 1
 cd whois-$VERSION
 chown -R root:root .
 find . \
diff --git a/source/n/wireless-tools/scripts/rc.wireless b/source/n/wireless-tools/scripts/rc.wireless
index 5d5c4be5..51623d50 100644
--- a/source/n/wireless-tools/scripts/rc.wireless
+++ b/source/n/wireless-tools/scripts/rc.wireless
@@ -53,6 +53,11 @@
 #                                if a network device is wireless.  In newer
 #                                kernels devices will not show up in
 #                                /proc/net/wireless until active.
+# 16/aug/2012 * Pat Volkerding * Use several tests to determine if an interface
+#                                is wireless, as the reliability of any given
+#                                test may depend on the kernel options and the
+#                                wireless driver used.
+#                                Convert the MAC address to uppercase in sed.
 # ------------------------------------------------------------------------------
 
 LOGGER=${LOGGER:-cat}
@@ -83,16 +88,15 @@ IFCOMMAND="/sbin/ifconfig ${INTERFACE}"
 
 is_wireless_device ()
 {
-    #[ -x $IWPATH/iwconfig ] || return 1
-    #LC_ALL=C $IWPATH/iwconfig $1 2>&1 | \
-    #    grep -Eiq "no wireless extensions|no such device" || return 0
-    #return 1
-    if [ ! -d /sys/class/net/${1}/wireless ]; then
-      # no wireless interface
-      return 1
-    else
-      # interface has wireless extensions
-      return 0
+    # Return 0 for a wireless interface, or 1 for a non-wireless interface.
+    if LC_ALL=C $IWPATH/iwconfig $1 2>&1 | grep -q "IEEE 802.11" ; then
+        return 0
+    elif [ -d /sys/class/net/${1}/wireless ]; then
+        return 0
+    elif [ "$(cat /sys/class/net/${1}/uevent | grep DEVTYPE)" = "DEVTYPE=wlan" ]; then 
+        return 0
+    else # all tests failed, assume the device is not wireless (or add a better test :)
+        return 1
     fi
 }
 
@@ -106,7 +110,7 @@ is_wireless_device ${INTERFACE} || return 0 2> /dev/null || exit 0
 # If we stop a wireless interface using wpa_supplicant,
 # we'll kill its wpa_supplicant daemon too and exit this script:
 if [ "$2" = "stop" ]; then
-	WPAPID=`echo \`ps axww|grep wpa_supplicant |grep i${INTERFACE}\` |cut -f1 -d' '`
+	WPAPID=$(echo $(ps axww | grep wpa_supplicant | grep i${INTERFACE}) | cut -f1 -d' ')
 	[ ${WPAPID} ] &&  kill ${WPAPID}
 	return 0
 fi
@@ -120,7 +124,7 @@ $IFCOMMAND up
 sleep 3
 
 # Get the MAC address for the interface
-HWADDR=`/sbin/ifconfig ${INTERFACE} | sed -ne 's/.*\(..:..:..:..:..:..\).*/\1/p' | tr [a-f] [A-F]`
+HWADDR=$(/sbin/ifconfig ${INTERFACE} | sed -ne 's/.*\(..:..:..:..:..:..\).*/\U\1/p')
 
 # Empty all wireless parameters- some of them could still be set for a previous interface:
 # when rc.inet1 is sourced from rc.M all scripts are run in the same shell.
@@ -193,7 +197,7 @@ if [ -n "$MODE" ] ; then
 fi
 # This is a bit hackish, but should do the job right...
 if [ ! -n "$NICKNAME" ] ; then
-    NICKNAME=`/bin/hostname`
+    NICKNAME=$(/bin/hostname)
 fi
 if [ -n "$ESSID" -o -n "$MODE" ] ; then
 	echo "$0:  $IWCOMMAND nick $NICKNAME" | $LOGGER
@@ -290,7 +294,7 @@ if [ "$WPA" = "wpa_supplicant" ] || [ "$WPA" = "wpaxsupplicant" ] && [ -x ${SUPP
 	[ ${WPA} = "wpaxsupplicant" ] && WPA_OPTIONS="${WPA_OPTIONS} -e" # Use external xsupplicant (disables the internal supplicant)
 
 	# We leave a running wpa_supplicant process in peace:
-	WPAPID=`echo \`ps axww|grep wpa_supplicant |grep i${INTERFACE}\` |cut -f1 -d' '`
+	WPAPID=$(echo $(ps axww | grep wpa_supplicant | grep i${INTERFACE}) | cut -f1 -d' ')
 	if [ ${WPAPID} ]; then
 	  echo "$0:  wpa_supplicant found running already" | $LOGGER
 	else
@@ -307,9 +311,9 @@ if [ "$WPA" = "wpa_supplicant" ] || [ "$WPA" = "wpaxsupplicant" ] && [ -x ${SUPP
 	while [ $wi -lt $WPAWAIT ]; do
 	  wi=$(($wi+1)); sleep 1
 	  if (grep -q "^ctrl_interface=" ${WPACONF}); then
-	    if (LC_ALL=C ${SUPPATH}/wpa_cli -i$INTERFACE status|grep -q "^wpa_state=COMPLETED"); then break; fi
+	    if (LC_ALL=C ${SUPPATH}/wpa_cli -i$INTERFACE status | grep -q "^wpa_state=COMPLETED"); then break; fi
 	  else
-	    if (LC_ALL=C ${IWCOMMAND}|grep -Eq "Encryption key:....-"); then break; fi
+	    if (LC_ALL=C ${IWCOMMAND} | grep -Eq "Encryption key:....-"); then break; fi
 	  fi
 	done
 	if [ $wi -eq $WPAWAIT ]; then
diff --git a/source/n/wireless-tools/wireless_tools.SlackBuild b/source/n/wireless-tools/wireless_tools.SlackBuild
index 2e78f0f9..21607d3d 100755
--- a/source/n/wireless-tools/wireless_tools.SlackBuild
+++ b/source/n/wireless-tools/wireless_tools.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=29
-BUILD=${BUILD:-6}
+BUILD=${BUILD:-9}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/wpa_supplicant/config/dot.config b/source/n/wpa_supplicant/config/dot.config
new file mode 100644
index 00000000..f4d7306b
--- /dev/null
+++ b/source/n/wpa_supplicant/config/dot.config
@@ -0,0 +1,42 @@
+CONFIG_BACKEND=file
+CONFIG_BGSCAN_SIMPLE=y
+CONFIG_CTRL_IFACE=y
+CONFIG_CTRL_IFACE_DBUS=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DRIVER_NL80211=y
+CONFIG_DRIVER_WEXT=y
+CONFIG_DRIVER_WIRED=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_FAST=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_TNC=y
+CONFIG_EAP_TTLS=y
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_LIBNL32=y
+CONFIG_PEERKEY=y
+CONFIG_PKCS12=y
+CONFIG_READLINE=y
+CONFIG_SMARTCARD=y
+CONFIG_WPS=y
+
+# These five are not defined by Fedora
+# Do we still need them?
+#CONFIG_DRIVER_ATMEL=y
+#CONFIG_DRIVER_HOSTAP=y
+#CONFIG_DRIVER_IPW=y
+#CONFIG_DRIVER_NDISWRAPPER=y
+#CONFIG_DRIVER_RALINK=y
+
diff --git a/source/n/wpa_supplicant/config/wpa_gui.desktop b/source/n/wpa_supplicant/config/wpa_gui.desktop
new file mode 100644
index 00000000..31b8b6b0
--- /dev/null
+++ b/source/n/wpa_supplicant/config/wpa_gui.desktop
@@ -0,0 +1,7 @@
+[Desktop Entry]
+Name=wpa_gui
+Comment[en]=Wpa_supplicant management
+Exec=kdesu wpa_gui
+Icon=wpa_gui
+Type=Application
+Categories=Qt;Network;
diff --git a/source/n/wpa_supplicant/wpa_gui.png b/source/n/wpa_supplicant/config/wpa_gui.png
index a72f3569..a72f3569 100644
--- a/source/n/wpa_supplicant/wpa_gui.png
+++ b/source/n/wpa_supplicant/config/wpa_gui.png
diff --git a/source/n/wpa_supplicant/config/wpa_supplicant.conf b/source/n/wpa_supplicant/config/wpa_supplicant.conf
new file mode 100644
index 00000000..4dbbf96a
--- /dev/null
+++ b/source/n/wpa_supplicant/config/wpa_supplicant.conf
@@ -0,0 +1,2 @@
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=root
diff --git a/source/n/wpa_supplicant/config/wpa_supplicant.logrotate b/source/n/wpa_supplicant/config/wpa_supplicant.logrotate
new file mode 100644
index 00000000..bd7ef91c
--- /dev/null
+++ b/source/n/wpa_supplicant/config/wpa_supplicant.logrotate
@@ -0,0 +1,6 @@
+/var/log/wpa_supplicant.log {
+    missingok
+    notifempty
+    size 30k
+    create 0600 root root
+}
diff --git a/source/n/wpa_supplicant/doinst.sh b/source/n/wpa_supplicant/doinst.sh
new file mode 100644
index 00000000..6052fca4
--- /dev/null
+++ b/source/n/wpa_supplicant/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/wpa_supplicant.conf.new
+config etc/logrotate.d/wpa_supplicant.new
diff --git a/source/n/wpa_supplicant/fi.epitest.hostap.WPASupplicant.service b/source/n/wpa_supplicant/fi.epitest.hostap.WPASupplicant.service
deleted file mode 100644
index e8b4250b..00000000
--- a/source/n/wpa_supplicant/fi.epitest.hostap.WPASupplicant.service
+++ /dev/null
@@ -1,4 +0,0 @@
-[D-BUS Service]
-Name=fi.epitest.hostap.WPASupplicant
-Exec=/usr/sbin/wpa_supplicant -u
-User=root
diff --git a/source/n/wpa_supplicant/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch b/source/n/wpa_supplicant/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch
deleted file mode 100644
index 4c500200..00000000
--- a/source/n/wpa_supplicant/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From b80b5639935d37b95d00f86b57f2844a9c775f57 Mon Sep 17 00:00:00 2001
-From: Dan Williams <dcbw@redhat.com>
-Date: Fri, 17 Dec 2010 15:56:01 +0200
-Subject: [PATCH] dbus: Emit property changed events when adding/removing BSSes
-
-The supplicant was not emitting property changed events when the BSSs
-property changed.
-
-Signed-off-by: Dan Williams <dcbw@redhat.com>
-(cherry picked from commit 1e6288df6b07a353a9246b77e0de2a840b5f2c72)
----
- wpa_supplicant/dbus/dbus_new.c |    6 ++++++
- wpa_supplicant/dbus/dbus_new.h |    1 +
- 2 files changed, 7 insertions(+), 0 deletions(-)
-
-diff --git a/wpa_supplicant/dbus/dbus_new.c b/wpa_supplicant/dbus/dbus_new.c
-index bdfbbac..c66640a 100644
---- a/wpa_supplicant/dbus/dbus_new.c
-+++ b/wpa_supplicant/dbus/dbus_new.c
-@@ -691,6 +691,10 @@ void wpas_dbus_signal_prop_changed(struct wpa_supplicant *wpa_s,
- 			wpas_dbus_getter_current_network;
- 		prop = "CurrentNetwork";
- 		break;
-+	case WPAS_DBUS_PROP_BSSS:
-+		getter = (WPADBusPropertyAccessor) wpas_dbus_getter_bsss;
-+		prop = "BSSs";
-+		break;
- 	default:
- 		wpa_printf(MSG_ERROR, "dbus: %s: Unknown Property value %d",
- 			   __func__, property);
-@@ -1199,6 +1203,7 @@ int wpas_dbus_unregister_bss(struct wpa_supplicant *wpa_s,
- 	}
- 
- 	wpas_dbus_signal_bss_removed(wpa_s, bss_obj_path);
-+	wpas_dbus_signal_prop_changed(wpa_s, WPAS_DBUS_PROP_BSSS);
- 
- 	return 0;
- }
-@@ -1263,6 +1268,7 @@ int wpas_dbus_register_bss(struct wpa_supplicant *wpa_s,
- 	}
- 
- 	wpas_dbus_signal_bss_added(wpa_s, bss_obj_path);
-+	wpas_dbus_signal_prop_changed(wpa_s, WPAS_DBUS_PROP_BSSS);
- 
- 	return 0;
- 
-diff --git a/wpa_supplicant/dbus/dbus_new.h b/wpa_supplicant/dbus/dbus_new.h
-index 80ea98c..9cdefcb 100644
---- a/wpa_supplicant/dbus/dbus_new.h
-+++ b/wpa_supplicant/dbus/dbus_new.h
-@@ -30,6 +30,7 @@ enum wpas_dbus_prop {
- 	WPAS_DBUS_PROP_STATE,
- 	WPAS_DBUS_PROP_CURRENT_BSS,
- 	WPAS_DBUS_PROP_CURRENT_NETWORK,
-+	WPAS_DBUS_PROP_BSSS,
- };
- 
- enum wpas_dbus_bss_prop {
--- 
-1.7.4-rc1
-
diff --git a/source/n/wpa_supplicant/patches/dbus-service-file-args.diff b/source/n/wpa_supplicant/patches/dbus-service-file-args.diff
new file mode 100644
index 00000000..7e2449f2
--- /dev/null
+++ b/source/n/wpa_supplicant/patches/dbus-service-file-args.diff
@@ -0,0 +1,20 @@
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in wpa_supplicant-1.0-rc3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in	2012-05-06 01:07:44.523999837 -0500
+@@ -1,5 +1,5 @@
+ [D-BUS Service]
+ Name=fi.epitest.hostap.WPASupplicant
+-Exec=@BINDIR@/wpa_supplicant -u
++Exec=@BINDIR@/wpa_supplicant -B -u -f /var/log/wpa_supplicant.log -P /var/run/wpa_supplicant.pid
+ User=root
+ SystemdService=wpa_supplicant.service
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in wpa_supplicant-1.0-rc3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in	2012-05-06 01:06:59.528589953 -0500
+@@ -1,5 +1,5 @@
+ [D-BUS Service]
+ Name=fi.w1.wpa_supplicant1
+-Exec=@BINDIR@/wpa_supplicant -u
++Exec=@BINDIR@/wpa_supplicant -B -u -f /var/log/wpa_supplicant.log -P /var/run/wpa_supplicant.pid
+ User=root
+ SystemdService=wpa_supplicant.service
diff --git a/source/n/wpa_supplicant/patches/include-unistd_h.diff b/source/n/wpa_supplicant/patches/include-unistd_h.diff
new file mode 100644
index 00000000..a3c6ae83
--- /dev/null
+++ b/source/n/wpa_supplicant/patches/include-unistd_h.diff
@@ -0,0 +1,15 @@
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_gui-qt4/wpagui.cpp wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_gui-qt4/wpagui.cpp
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_gui-qt4/wpagui.cpp	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_gui-qt4/wpagui.cpp	2012-05-05 17:04:40.706570034 -0500
+@@ -12,10 +12,8 @@
+  * See README and COPYING for more details.
+  */
+ 
+-#ifdef __MINGW32__
+-/* Need to get getopt() */
++/* Need to get getopt() regardless with gcc-4.7.x */
+ #include <unistd.h>
+-#endif
+ 
+ #ifdef CONFIG_NATIVE_WINDOWS
+ #include <windows.h>
diff --git a/source/n/wpa_supplicant/patches/libnl3-includes.diff b/source/n/wpa_supplicant/patches/libnl3-includes.diff
new file mode 100644
index 00000000..f8ff01c1
--- /dev/null
+++ b/source/n/wpa_supplicant/patches/libnl3-includes.diff
@@ -0,0 +1,12 @@
+diff -Nur wpa_supplicant-1.0-rc3.orig/src/drivers/drivers.mak wpa_supplicant-1.0-rc3/src/drivers/drivers.mak
+--- wpa_supplicant-1.0-rc3.orig/src/drivers/drivers.mak	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/src/drivers/drivers.mak	2012-05-05 17:16:01.933597117 -0500
+@@ -48,7 +48,7 @@
+ ifdef CONFIG_LIBNL32
+   DRV_LIBS += -lnl-3
+   DRV_LIBS += -lnl-genl-3
+-  DRV_CFLAGS += -DCONFIG_LIBNL20
++  DRV_CFLAGS += -DCONFIG_LIBNL20 `pkg-config --cflags libnl-3.0`
+ else
+   ifdef CONFIG_LIBNL_TINY
+     DRV_LIBS += -lnl-tiny
diff --git a/source/n/wpa_supplicant/patches/quiet-scan-results-message.diff b/source/n/wpa_supplicant/patches/quiet-scan-results-message.diff
new file mode 100644
index 00000000..2b3eb672
--- /dev/null
+++ b/source/n/wpa_supplicant/patches/quiet-scan-results-message.diff
@@ -0,0 +1,12 @@
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/events.c wpa_supplicant-1.0-rc3/wpa_supplicant/events.c
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/events.c	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/events.c	2012-05-05 17:02:38.061179720 -0500
+@@ -1076,7 +1076,7 @@
+ 	}
+ 
+ 	wpa_dbg(wpa_s, MSG_DEBUG, "New scan results available");
+-	wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS);
++	wpa_msg_ctrl(wpa_s, MSG_DEBUG, WPA_EVENT_SCAN_RESULTS);
+ 	wpas_notify_scan_results(wpa_s);
+ 
+ 	wpas_notify_scan_done(wpa_s, 1);
diff --git a/source/n/wpa_supplicant/patches/squelch-driver-disconnect-spam.diff b/source/n/wpa_supplicant/patches/squelch-driver-disconnect-spam.diff
new file mode 100644
index 00000000..b8d2be6a
--- /dev/null
+++ b/source/n/wpa_supplicant/patches/squelch-driver-disconnect-spam.diff
@@ -0,0 +1,95 @@
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/events.c wpa_supplicant-1.0-rc3/wpa_supplicant/events.c
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/events.c	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/events.c	2012-05-06 01:01:17.529134316 -0500
+@@ -1593,6 +1593,15 @@
+ 		wpa_s->keys_cleared = 0;
+ 		wpa_clear_keys(wpa_s, wpa_s->bssid);
+ 	}
++
++	if (wpa_s->wpa_state == WPA_DISCONNECTED) {
++		wpa_s->disconnect_count++;
++		if (!eloop_is_timeout_registered(wpa_disconnect_spam_handle, wpa_s, NULL)) {
++			eloop_register_timeout(6, 0, wpa_disconnect_spam_handle, wpa_s, NULL);
++			wpa_printf(MSG_DEBUG, "%s: scheduled DISCONNECT spam handler", __FUNCTION__);
++		}
++	}
++
+ 	wpa_supplicant_mark_disassoc(wpa_s);
+ 
+ 	if (authenticating && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME))
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_supplicant.c wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_supplicant.c
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_supplicant.c	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_supplicant.c	2012-05-06 01:01:17.530134303 -0500
+@@ -434,6 +434,9 @@
+ 
+ 	wpa_supplicant_cancel_scan(wpa_s);
+ 	wpa_supplicant_cancel_auth_timeout(wpa_s);
++	if (eloop_is_timeout_registered(wpa_disconnect_spam_handle, wpa_s, NULL))
++		eloop_cancel_timeout(wpa_disconnect_spam_handle, wpa_s, NULL);
++
+ 	eloop_cancel_timeout(wpa_supplicant_stop_countermeasures, wpa_s, NULL);
+ #ifdef CONFIG_DELAYED_MIC_ERROR_REPORT
+ 	eloop_cancel_timeout(wpa_supplicant_delayed_mic_error_report,
+@@ -592,6 +595,23 @@
+ #endif /* CONFIG_BGSCAN */
+ 
+ 
++void wpa_disconnect_spam_handle(void *eloop_ctx, void *timeout_ctx)
++{
++	struct wpa_supplicant *wpa_s = eloop_ctx;
++	const u8 bssid[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
++
++	wpa_printf(MSG_DEBUG, "%s: %d disconnect events in 6 seconds",
++		   __FUNCTION__, wpa_s->disconnect_count);
++
++	if (wpa_s->disconnect_count >= 3) {
++		wpa_printf(MSG_DEBUG, "%s: forcing SSID/BSSID reset", __FUNCTION__);
++		wpa_drv_disassociate(wpa_s, bssid, WLAN_REASON_DEAUTH_LEAVING);
++		wpa_supplicant_req_scan(wpa_s, 1, 0);
++	}
++	wpa_s->disconnect_count = 0;
++}
++
++
+ /**
+  * wpa_supplicant_set_state - Set current connection state
+  * @wpa_s: Pointer to wpa_supplicant data
+@@ -612,6 +632,18 @@
+ 	if (state != WPA_SCANNING)
+ 		wpa_supplicant_notify_scanning(wpa_s, 0);
+ 
++	if (state != WPA_DISCONNECTED && state != WPA_SCANNING) {
++		/* If the state isn't disconnected, cancel any registered
++		 * disconnect spam handler, which should only live while
++		 * disconnect events are coming in quickly.
++		 */
++		wpa_s->disconnect_count = 0;
++		if (eloop_is_timeout_registered(wpa_disconnect_spam_handle, wpa_s, NULL)) {
++			wpa_printf(MSG_DEBUG, "%s: canceling DISCONNECT spam handler", __FUNCTION__);
++			eloop_cancel_timeout(wpa_disconnect_spam_handle, wpa_s, NULL);
++		}
++	}
++
+ 	if (state == WPA_COMPLETED && wpa_s->new_connection) {
+ #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG)
+ 		struct wpa_ssid *ssid = wpa_s->current_ssid;
+diff -Nur wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_supplicant_i.h wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_supplicant_i.h
+--- wpa_supplicant-1.0-rc3.orig/wpa_supplicant/wpa_supplicant_i.h	2012-04-16 15:15:40.000000000 -0500
++++ wpa_supplicant-1.0-rc3/wpa_supplicant/wpa_supplicant_i.h	2012-05-06 01:01:17.530134303 -0500
+@@ -355,6 +355,8 @@
+ 	struct wps_er *wps_er;
+ 	int blacklist_cleared;
+ 
++	int disconnect_count;
++
+ 	struct wpabuf *pending_eapol_rx;
+ 	struct os_time pending_eapol_rx_time;
+ 	u8 pending_eapol_rx_src[ETH_ALEN];
+@@ -535,6 +537,7 @@
+ 				     int sec, int usec);
+ void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
+ 			      enum wpa_states state);
++void wpa_disconnect_spam_handle(void *eloop_ctx, void *timeout_ctx);
+ struct wpa_ssid * wpa_supplicant_get_ssid(struct wpa_supplicant *wpa_s);
+ const char * wpa_supplicant_get_eap_mode(struct wpa_supplicant *wpa_s);
+ void wpa_supplicant_cancel_auth_timeout(struct wpa_supplicant *wpa_s);
diff --git a/source/n/wpa_supplicant/wpa_supplicant.SlackBuild b/source/n/wpa_supplicant/wpa_supplicant.SlackBuild
index 8bbf01db..32165fa9 100755
--- a/source/n/wpa_supplicant/wpa_supplicant.SlackBuild
+++ b/source/n/wpa_supplicant/wpa_supplicant.SlackBuild
@@ -22,8 +22,10 @@
 # -----------------------------------------------------------------------------
 
 PKGNAM=wpa_supplicant
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+VERSION=1.0
+BUILD=${BUILD:-1}
+
+SRCVERSION=$(printf $VERSION | tr _ -)
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -37,8 +39,6 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
-DOCS="ChangeLog ../COPYING README README-WPS *.txt examples wpa_supplicant.conf.sample"
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -59,31 +59,16 @@ else
   LIBDIRSUFFIX=""
 fi
 
-# Support for some of the wireless drivers needs the header files of those
-# drivers.
-# Change these *_INCLUDES variables to where _your_ driver include directory
-# is located. If any of these directories is found, support for the driver
-# will be added to wpa_supplicant.
-# My madwifi package for Slackware installs the headers here:
-MADWIFI_INCLUDES="/usr/include/madwifi"
-HERMES_INCLUDES=""
-BROADCOM_INCLUDES=""
-
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
+
 rm -rf $PKG
 mkdir -p $TMP $PKG
-
-if ! [ -f $CWD/${PKGNAM}.defconfig ]; then
-  echo "Could not find ${PKGNAM}.defconfig!"
-  exit 1
-fi
-
 cd $TMP
-rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1
-cd ${PKGNAM}-${VERSION}
+rm -rf ${PKGNAM}-${SRCVERSION}
+tar xvf $CWD/${PKGNAM}-${SRCVERSION}.tar.?z* || exit 1
+cd ${PKGNAM}-${SRCVERSION}
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -91,179 +76,91 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-#sed -i -e \
-#  "s/^#define VERSION_STR \"\(.*\)\"/#define VERSION_STR \"\1_$VERSION\"/" \
-#  src/common/version.h
+# Fixup various paths in the dbus service file
+patch -p1 < $CWD/patches/dbus-service-file-args.diff
+
+# Include unistd.h 
+patch -p1 < $CWD/patches/include-unistd_h.diff
 
-zcat $CWD/hostap-07.git-b80b5639935d37b95d00f86b57f2844a9c775f57.patch.gz | patch -p1 --verbose || exit 1
+# Add libnl3 includes
+patch -p1 < $CWD/patches/libnl3-includes.diff
+
+# Eliminate some logspam
+patch -p1 < $CWD/patches/quiet-scan-results-message.diff
+patch -p1 < $CWD/patches/squelch-driver-disconnect-spam.diff
 
-# The source code has been re-organized:
 cd wpa_supplicant
 
 # Create the configuration file for building wpa_supplicant:
-cat $CWD/${PKGNAM}.defconfig > .config
-if [ ! -z $MADWIFI_INCLUDES -a -d $MADWIFI_INCLUDES ]; then
-  echo "Adding madwifi driver (Atheros) support"
-  cat <<-EOT >> .config
-	CONFIG_DRIVER_MADWIFI=y
-	CFLAGS += -I${MADWIFI_INCLUDES}
-	EOT
-fi
-if [ ! -z $HERMES_INCLUDES -a -d $HERMES_INCLUDES ]; then
-  echo "Adding hermes driver (Agere) support"
-  cat <<-EOT >> .config
-	CONFIG_DRIVER_HERMES=y
-	CFLAGS += -I${HERMES_INCLUDES}
-	EOT
-fi
-if [ ! -z $BROADCOM_INCLUDES -a -d $BROADCOM_INCLUDES ]; then
-  echo "Adding broadcom driver support"
-  cat <<-EOT >> .config
-	CONFIG_DRIVER_BROADCOM=y
-	CFLAGS += -I${BROADCOM_INCLUDES}
-	EOT
-fi
-make $NUMJOBS || make || exit 1
+cat $CWD/config/dot.config > .config
 
-# Build the Qt4 GUI client
-make wpa_gui-qt4 || exit 1
+# Build the usual binaries
+CFLAGS="$SLKCFLAGS" \
+make $NUMJOBS \
+  BINDIR=/usr/sbin \
+  LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1
 
-# Make man pages if needed
-( cd doc/docbook
-  if ! ls *.? >/dev/null 2>&1 ; then
-    make man
-  fi
-)
+# Build the Qt4 GUI client
+CFLAGS="$SLKCFLAGS" \
+make $NUMJOBS \
+  wpa_gui-qt4 \
+  BINDIR=/usr/sbin \
+  LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1
 
-# Do not build the developer docs:
-#PATH=".:$PATH" make docs
+# Make sure man pages are built
+make -C doc/docbook man
 
 # This goes into the doc directory later on:
-cp wpa_supplicant.conf wpa_supplicant.conf.sample
+mv wpa_supplicant.conf wpa_supplicant.conf.sample
 
 # Install binaries:
 mkdir -p $PKG/usr/sbin $PKG/usr/bin
 cp wpa_supplicant wpa_passphrase wpa_cli $PKG/usr/sbin/
 cp wpa_gui-qt4/wpa_gui $PKG/usr/bin/
 
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
 # Install dbus configuration file:
 mkdir -p $PKG/etc/dbus-1/system.d/
 cp dbus/dbus-wpa_supplicant.conf \
   $PKG/etc/dbus-1/system.d/dbus-wpa_supplicant.conf
 
-# This file should actually be shipped with Slackware's wpa_supplicant
-# package, but since we missed it there (just kidding), we'll do it here:
 mkdir -p $PKG/usr/share/dbus-1/system-services
-install -m644 dbus/{fi.epitest.hostap.WPASupplicant.service,fi.w1.wpa_supplicant1.service} \
-  $PKG/usr/share/dbus-1/system-services/
-sed -e 's#Exec=/sbin/wpa_supplicant#Exec=/usr/sbin/wpa_supplicant#g' \
-  -i $PKG/usr/share/dbus-1/system-services/*.service
+install -m644 dbus/*.service $PKG/usr/share/dbus-1/system-services/
 
-# Install a .desktop file for wpa_gui:
-mkdir -p $PKG/usr/share/applications
-cat <<EOT > $PKG/usr/share/applications/wpa_gui.desktop
-[Desktop Entry]
-Name=wpa_gui
-Comment[en]=Wpa_supplicant management
-Exec=kdesu wpa_gui
-Icon=wpa_gui
-Type=Application
-Categories=Qt;Network;
-EOT
+# Install a .desktop file and icon for wpa_gui:
+# (converted from the wpa_gui.svg in the source)
+mkdir -p $PKG/usr/share/{applications,pixmaps}
+cat $CWD/config/wpa_gui.desktop > $PKG/usr/share/applications/wpa_gui.desktop
+cat $CWD/config/wpa_gui.png > $PKG/usr/share/pixmaps/wpa_gui.png
 
-# The icon used for the menu (converted from the wpa_gui.svg in the source)
-mkdir -p $PKG/usr/share/pixmaps
-cp -a $CWD/wpa_gui.png $PKG/usr/share/pixmaps/
+# Install a logrotate config
+mkdir -p $PKG/etc/logrotate.d
+cat $CWD/config/wpa_supplicant.logrotate > $PKG/etc/logrotate.d/wpa_supplicant.new
 
 # Install man pages:
 for m in 5 8; do
   mkdir -p $PKG/usr/man/man${m}
   cp doc/docbook/*.${m} $PKG/usr/man/man${m}/
 done
+find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
 
-# Install a default configuration file:
+# Install a default configuration file (only readable by root):
 mkdir -p $PKG/etc
-cat <<-_EOT_ > $PKG/etc/wpa_supplicant.conf.new
-	# See /usr/doc/${PKGNAM}-${VERSION}/wpa_supplicant.conf.sample
-	# for many more options that you can use in this file.
-	
-	# This line enables the use of wpa_cli which is used by rc.wireless
-	# if possible (to check for successful association)
-	ctrl_interface=/var/run/wpa_supplicant
-	# By default, only root (group 0) may use wpa_cli
-	ctrl_interface_group=0
-	eapol_version=1
-	ap_scan=1
-	fast_reauth=1
-	#country=US
-	
-	# WPA protected network, supply your own ESSID and WPAPSK here:
-	network={
-	  scan_ssid=0
-	  ssid="your_essid_here"
-	  proto=WPA RSN
-	  key_mgmt=WPA-PSK
-	  pairwise=CCMP TKIP
-	  group=CCMP TKIP WEP104 WEP40
-	  psk=your_64_char_psk_here
-	  priority=10
-	}
-	
-	# Plaintext connection (no WPA, no IEEE 802.1X),
-	# nice for hotel/airport types of WiFi network.
-	network={
-	  key_mgmt=NONE
-	  priority=0
-	}
-	_EOT_
-
-# Create the 'doinst.sh' script:
-mkdir -p $PKG/install 2>/dev/null
-cat <<EOINS > $PKG/install/doinst.sh
-# Handle the incoming configuration files:
-config() {
-  for infile in \$1; do
-    NEW="\$infile"
-    OLD="\`dirname \$NEW\`/\`basename \$NEW .new\`"
-    # If there's no config file by that name, mv it over:
-    if [ ! -r \$OLD ]; then
-      mv \$NEW \$OLD
-    elif [ "\`cat \$OLD | md5sum\`" = "\`cat \$NEW | md5sum\`" ]; then
-      # toss the redundant copy
-      rm \$NEW
-    fi
-    # Otherwise, we leave the .new copy for the admin to consider...
-  done
-}
-config etc/wpa_supplicant.conf.new
-
-EOINS
+cat $CWD/config/wpa_supplicant.conf > $PKG/etc/wpa_supplicant.conf.new
+chmod 600 $PKG/etc/wpa_supplicant.conf.new
 
-# Add the documentation:
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a $DOCS $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a $CWD/README.slackware $PKG/usr/doc/${PKGNAM}-${VERSION}/
-chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/*
+cp -a \
+  ChangeLog ../COPYING README README-{P2P,WPS} examples *.txt *.sample $CWD/README.slackware \
+  $PKG/usr/doc/$PKGNAM-$VERSION
 chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION/*
+chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/*
 
-# This should only be read/write by root:
-chmod 600 $PKG/etc/wpa_supplicant.conf.new
-
-# Compress the man page(s):
-find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
-
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Add a package description:
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
-if [ -f $CWD/doinst.sh ]; then
-  cat $CWD/doinst.sh >> $PKG/install/doinst.sh
-fi
+zcat $CWD/doinst.sh.gz >> $PKG/install/doinst.sh
 
-# Build the package:
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
-
diff --git a/source/n/wpa_supplicant/wpa_supplicant.defconfig b/source/n/wpa_supplicant/wpa_supplicant.defconfig
deleted file mode 100644
index 2c530fdc..00000000
--- a/source/n/wpa_supplicant/wpa_supplicant.defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_DRIVER_HOSTAP=y
-CONFIG_DRIVER_NDISWRAPPER=y
-CONFIG_DRIVER_ATMEL=y
-CONFIG_DRIVER_IPW=y
-CONFIG_DRIVER_RALINK=y
-CONFIG_DRIVER_WEXT=y
-CONFIG_DRIVER_NL80211=y
-CONFIG_DRIVER_WIRED=y
-CONFIG_IEEE8021X_EAPOL=y
-CONFIG_EAP_MD5=y
-CONFIG_EAP_MSCHAPV2=y
-CONFIG_EAP_TLS=y
-CONFIG_EAP_PEAP=y
-CONFIG_EAP_TTLS=y
-CONFIG_EAP_GTC=y
-CONFIG_EAP_OTP=y
-CONFIG_EAP_LEAP=y
-CONFIG_WPS=y
-CONFIG_PKCS12=y
-CONFIG_SMARTCARD=y
-CONFIG_CTRL_IFACE=y
-CONFIG_READLINE=y
-CONFIG_BACKEND=file
-CONFIG_PEERKEY=y
-CONFIG_CTRL_IFACE_DBUS=y
-CONFIG_CTRL_IFACE_DBUS_NEW=y
-CONFIG_CTRL_IFACE_DBUS_INTRO=y
diff --git a/source/n/yptools/rc.yp b/source/n/yptools/rc.yp
index 4c3b8dec..eda9634e 100644
--- a/source/n/yptools/rc.yp
+++ b/source/n/yptools/rc.yp
@@ -10,49 +10,114 @@
 # documentation in /usr/doc/yp-tools, /usr/doc/ypbind,
 # /usr/doc/ypserv, and /usr/doc/Linux-HOWTOs/NIS-HOWTO.
 
-# # First, we must setup the NIS domainname.  NOTE: this is not necessarily
-# # the same as your DNS domainname, set in /etc/resolv.conf.  The NIS
-# # domainname is the name of a domain served by your NIS server.
-# 
-# if [ -r /etc/defaultdomain ]; then
-#   nisdomainname `cat /etc/defaultdomain`
-# fi
-#
-# # NIS SERVER CONFIGURATION:
-# # If you are the master server for the NIS domain, you must run ypserv to
-# # service clients on the domain.
-# if [ -x /usr/sbin/ypserv ]; then
-#   echo "Starting NIS server:  /usr/sbin/ypserv"
-#   /usr/sbin/ypserv
-# fi
-#
-# # If you are the master server for the NIS domain, you must also run
-# # rpc.yppasswdd, which is the RPC server that lets users change their
-# # passwords.  You might also want users to be able to change their shell
-# # and GECOS information, in which case you should comment out the first
-# # yppasswdd line and uncomment out the second one.
-# if [ -x /usr/sbin/rpc.yppasswdd ]; then
-#   echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd"
-#   /usr/sbin/rpc.yppasswdd
-#   # echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd -e chsh -e chfn"
-#   # /usr/sbin/rpc.yppasswdd -e chsh -e chfn
-# fi
-#
-# # If you have NIS slave servers, you might also want to start up
-# # rpc.ypxfrd, which transfers changes in the NIS domain to slave servers.
-# # Alternatively, rpc.ypxfrd can be run out of inetd.
-# if [ -x /usr/sbin/rpc.ypxfrd ]; then
-#   echo "Starting NIS transfer server:  /usr/sbin/rpc.ypxfrd"
-#   /usr/sbin/rpc.ypxfrd
-# fi
-#
-# # NIS CLIENT CONFIGURATION:
-# # If you are a NIS client, all you need to do is run ypbind, which will
-# # broadcast across the network to find a server.  Your NIS server might
-# # also be a client.
-# if [ -d /var/yp ]; then
-#   echo "Starting NIS services:  /usr/sbin/ypbind -broadcast"
-#   /usr/sbin/ypbind -broadcast
-# fi
+# Set non-zero to enable yp client functions
+YP_CLIENT_ENABLE=1
+
+# Set non-zero to enable yp server functions
+YP_SERVER_ENABLE=0
+
+# If YP_SERVER_ENABLE is set, a non-zero YP_XFRD_ENABLE setting will
+# enable ypxfrd.
+YP_XFRD_ENABLE=0
+
+PID_PATH=/var/run
+
+yp_start() {
+
+  if [ $YP_SERVER_ENABLE -ne 0 ]; then
+    # NIS SERVER CONFIGURATION:
+    # If you are the master server for the NIS domain, you must run ypserv to
+    # service clients on the domain.
+    if [ -x /usr/sbin/ypserv ]; then
+      echo "Starting NIS server:  /usr/sbin/ypserv"
+      /usr/sbin/ypserv
+    fi
+
+    # If you are the master server for the NIS domain, you must also run
+    # rpc.yppasswdd, which is the RPC server that lets users change their
+    # passwords.  You might also want users to be able to change their shell
+    # and GECOS information, in which case you should comment out the first
+    # yppasswdd line and uncomment out the second one.
+
+    if [ -x /usr/sbin/rpc.yppasswdd ]; then
+      echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd"
+      /usr/sbin/rpc.yppasswdd
+      # echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd -e chsh -e chfn"
+      # /usr/sbin/rpc.yppasswdd -e chsh -e chfn
+    fi
+
+    # If you have NIS slave servers, you might also want to start up
+    # rpc.ypxfrd, which transfers changes in the NIS domain to slave servers.
+    # Alternatively, rpc.ypxfrd can be run out of inetd.
+    if [ $YP_XFRD_ENABLE -ne 0 ]; then
+      if [ -x /usr/sbin/rpc.ypxfrd ]; then
+        echo "Starting NIS transfer server:  /usr/sbin/rpc.ypxfrd"
+        /usr/sbin/rpc.ypxfrd
+      fi
+    fi
+  fi
+
+  if [ $YP_CLIENT_ENABLE -ne 0 ]; then
+    # NIS CLIENT CONFIGURATION:
+    # If you are a NIS client, all you need to do is run ypbind, which will
+    # broadcast across the network to find a server.  Your NIS server might
+    # also be a client.
+    if [ -d /var/yp ]; then
+      echo "Starting NIS services:  /usr/sbin/ypbind -broadcast"
+      /usr/sbin/ypbind -broadcast
+    fi
+  fi
+}
+
+yp_stop() {
+  if [ -r ${PID_PATH}/ypbind.pid ]; then
+    echo "Stopping NIS services."
+    kill $(cat ${PID_PATH}/ypbind.pid)
+  fi
+
+  if [ -r ${PID_PATH}/ypxfrd.pid ]; then
+    echo "Stopping NIS transfer server."
+    kill $(cat ${PID_PATH}/ypxfrd.pid)
+  fi
+
+  if [ -r ${PID_PATH}/yppasswdd.pid ]; then
+    echo "Stopping NIS master password server."
+    kill $(cat ${PID_PATH}/yppasswdd.pid)
+  fi
+
+  if [ -r ${PID_PATH}/ypserv.pid ]; then
+    echo "Stopping NIS server."
+    kill $(cat ${PID_PATH}/ypserv.pid)
+  fi
+}
+
+# First, we must setup the NIS domainname.  NOTE: this is not necessarily
+# the same as your DNS domainname, set in /etc/resolv.conf.  The NIS
+# domainname is the name of a domain served by your NIS server.
 #
+# If /etc/defaultdomain has not been configured we'll bail out.
+if [ -r /etc/defaultdomain -a -x /bin/nisdomainname ]; then
+  if [ "$(nisdomainname)" == "(none)" ]; then
+    nisdomainname `cat /etc/defaultdomain`
+  fi
+else
+  echo "/etc/rc.d/rc.yp:  NIS not configured.  Hint: set up /etc/defaultdomain."
+  exit 0
+fi
+
+case "$1" in
+'start')
+  yp_start
+  ;;
+'stop')
+  yp_stop
+  ;;
+'restart')
+  yp_stop
+  yp_start
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
+
 # # Done setting up NIS.
diff --git a/source/n/yptools/yptools.SlackBuild b/source/n/yptools/yptools.SlackBuild
index 6a213b2a..42d96a30 100755
--- a/source/n/yptools/yptools.SlackBuild
+++ b/source/n/yptools/yptools.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 # Package version number:
 VERSION=2.12
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 YPTOOLS=$VERSION
 YPBINDMT=1.32
@@ -208,7 +208,7 @@ make CFLAGS="$SLKCFLAGS" || exit 1
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/yp
 ( cd scripts
   for file in create_printcap match_printcap pwupdate ypinit ypxfr_1perday ypxfr_1perhour ypxfr_2perday ; do
-    cat $file > $PKG/usr/lib${LIBDIRSUFFIX}/yp/$file
+    cat $file | sed -e "s#/usr/lib/#/usr/lib${LIBDIRSUFFIX}/#" > $PKG/usr/lib${LIBDIRSUFFIX}/yp/$file
     chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/yp/$file
   done 
   for file in pwupdate.8 ypinit.8 ; do
@@ -246,7 +246,7 @@ chown root:root $PKG/usr/doc/ypserv-$YPSERV/*
 
 mkdir -p $PKG/etc/rc.d
 zcat $CWD/rc.yp.gz > $PKG/etc/rc.d/rc.yp.new
-chmod 755 $PKG/etc/rc.d/rc.yp.new
+chmod 644 $PKG/etc/rc.d/rc.yp.new
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
@@ -266,6 +266,13 @@ config() {
   # Otherwise, we leave the .new copy for the admin to consider...
 }
 
+# Keep same perms on rc.yp.new:
+if [ -e etc/rc.d/rc.yp ]; then
+  cp -a etc/rc.d/rc.yp etc/rc.d/rc.yp.new.incoming
+  cat etc/rc.d/rc.yp.new > etc/rc.d/rc.yp.new.incoming
+  mv etc/rc.d/rc.yp.new.incoming etc/rc.d/rc.yp.new
+fi
+
 config etc/nsswitch.conf-nis.new
 config etc/netgroup.new
 config etc/yp.conf.new
diff --git a/source/tcl/tcl/tcl.SlackBuild b/source/tcl/tcl/tcl.SlackBuild
index 03d51ca3..ff0ad5a3 100755
--- a/source/tcl/tcl/tcl.SlackBuild
+++ b/source/tcl/tcl/tcl.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-8.5.9}
+VERSION=${VERSION:-8.5.11}
 # See also version number 8.5 in the symlinks below...)
 BUILD=${BUILD:-1}
 
@@ -35,6 +35,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-tcl
@@ -89,7 +91,7 @@ CFLAGS="$SLKCFLAGS" \
   --enable-man-compression=gzip \
   ${CONFARGS} \
   --build=$ARCH-slackware-linux
-make -j4 || exit 1
+make $NUMJOBS || exit 1
 make install DESTDIR=$PKG
 
 # Some sources require Tcl's private headers, which might not be the
diff --git a/source/tcl/tk/tk.SlackBuild b/source/tcl/tk/tk.SlackBuild
index a100a8a2..f2adfc08 100755
--- a/source/tcl/tk/tk.SlackBuild
+++ b/source/tcl/tk/tk.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,7 +21,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=${VERSION:-8.5.9}
+VERSION=${VERSION:-8.5.11}
 # See also version number 8.5 in the symlinks below...)
 BUILD=${BUILD:-1}
 
diff --git a/source/x/fontconfig/fontconfig.SlackBuild b/source/x/fontconfig/fontconfig.SlackBuild
index 5feb6fd9..bb3b192f 100755
--- a/source/x/fontconfig/fontconfig.SlackBuild
+++ b/source/x/fontconfig/fontconfig.SlackBuild
@@ -87,6 +87,7 @@ CFLAGS=$SLKCFLAGS \
   --mandir=/usr/man \
   --sysconfdir=/etc \
   --localstatedir=/var \
+  --enable-static=no \
   --build=$ARCH-slackware-linux
 
 # Uses a currently non-functional sgml tool, thus '-i':
diff --git a/source/x/fontconfig/fontconfig.dejavu.diff b/source/x/fontconfig/fontconfig.dejavu.diff
index af71a44b..6edcfd37 100644
--- a/source/x/fontconfig/fontconfig.dejavu.diff
+++ b/source/x/fontconfig/fontconfig.dejavu.diff
@@ -1,42 +1,5 @@
-diff -Nur fontconfig-2.8.0.orig/conf.d/45-latin.conf fontconfig-2.8.0/conf.d/45-latin.conf
---- fontconfig-2.8.0.orig/conf.d/45-latin.conf	2009-11-16 11:24:52.000000000 -0600
-+++ fontconfig-2.8.0/conf.d/45-latin.conf	2009-12-01 21:45:42.639936724 -0600
-@@ -10,9 +10,9 @@
-   Serif faces
-  -->
- 	<alias>
--		<family>Bitstream Vera Serif</family>
- 		<family>DejaVu Serif</family>
- 		<family>Liberation Serif</family>
-+		<family>Bitstream Vera Serif</family>
- 		<family>Times New Roman</family>
- 		<family>Times</family>
- 		<family>Nimbus Roman No9 L</family>
-@@ -25,9 +25,9 @@
-   Sans-serif faces
-  -->
- 	<alias>
--		<family>Bitstream Vera Sans</family>
- 		<family>DejaVu Sans</family>
- 		<family>Liberation Sans</family>
-+		<family>Bitstream Vera Sans</family>
- 		<family>Arial</family>
- 		<family>Helvetica</family>
- 		<family>Verdana</family>
-@@ -41,9 +41,9 @@
-   Monospace faces
-  -->
-  	<alias>
--		<family>Bitstream Vera Sans Mono</family>
- 		<family>DejaVu Sans Mono</family>
- 		<family>Liberation Mono</family>
-+		<family>Bitstream Vera Sans Mono</family>
- 		<family>Inconsolata</family>
- 		<family>Courier New</family>
- 		<family>Courier</family>
-diff -Nur fontconfig-2.8.0.orig/conf.d/60-latin.conf fontconfig-2.8.0/conf.d/60-latin.conf
---- fontconfig-2.8.0.orig/conf.d/60-latin.conf	2009-11-16 11:24:52.000000000 -0600
-+++ fontconfig-2.8.0/conf.d/60-latin.conf	2009-12-01 21:46:39.925935327 -0600
+--- ./conf.d/60-latin.conf.orig	2012-03-10 00:24:45.000000000 -0600
++++ ./conf.d/60-latin.conf	2012-07-03 15:57:40.109978298 -0500
 @@ -4,8 +4,8 @@
  	<alias>
  		<family>serif</family>
@@ -67,3 +30,65 @@ diff -Nur fontconfig-2.8.0.orig/conf.d/60-latin.conf fontconfig-2.8.0/conf.d/60-
  			<family>Inconsolata</family>
  			<family>Andale Mono</family>
  			<family>Courier New</family>
+--- ./conf.d/45-latin.conf.orig	2012-03-10 00:24:45.000000000 -0600
++++ ./conf.d/45-latin.conf	2012-07-03 15:57:28.685978786 -0500
+@@ -10,15 +10,15 @@
+   Serif faces
+  -->
+ 	<alias>
+-		<family>Bitstream Vera Serif</family>
++		<family>DejaVu Serif</family>
+ 		<default><family>serif</family></default>
+ 	</alias>
+ 	<alias>
+-		<family>DejaVu Serif</family>
++		<family>Liberation Serif</family>
+ 		<default><family>serif</family></default>
+ 	</alias>
+ 	<alias>
+-		<family>Liberation Serif</family>
++		<family>Bitstream Vera Serif</family>
+ 		<default><family>serif</family></default>
+ 	</alias>
+ 	<alias>
+@@ -49,15 +49,15 @@
+   Sans-serif faces
+  -->
+ 	<alias>
+-		<family>Bitstream Vera Sans</family>
++		<family>DejaVu Sans</family>
+ 		<default><family>sans-serif</family></default>
+ 	</alias>
+ 	<alias>
+-		<family>DejaVu Sans</family>
++		<family>Liberation Sans</family>
+ 		<default><family>sans-serif</family></default>
+ 	</alias>
+ 	<alias>
+-		<family>Liberation Sans</family>
++		<family>Bitstream Vera Sans</family>
+ 		<default><family>sans-serif</family></default>
+ 	</alias>
+ 	<alias>
+@@ -91,10 +91,6 @@
+ <!--
+   Monospace faces
+  -->
+- 	<alias>
+-		<family>Bitstream Vera Sans Mono</family>
+-		<default><family>monospace</family></default>
+-	</alias>
+ 	<alias>
+ 		<family>DejaVu Sans Mono</family>
+ 		<default><family>monospace</family></default>
+@@ -103,6 +99,10 @@
+ 		<family>Liberation Mono</family>
+ 		<default><family>monospace</family></default>
+ 	</alias>
++ 	<alias>
++		<family>Bitstream Vera Sans Mono</family>
++		<default><family>monospace</family></default>
++	</alias>
+ 	<alias>
+ 		<family>Inconsolata</family>
+ 		<default><family>monospace</family></default>
diff --git a/source/x/freeglut/RATIONALE b/source/x/freeglut/RATIONALE
new file mode 100644
index 00000000..0e2c59ba
--- /dev/null
+++ b/source/x/freeglut/RATIONALE
@@ -0,0 +1,14 @@
+From mesa-8.0 git log:
+
+    commit 34a28ccbf459ed5710aafba5e7149e8291cb808c
+    Author: José Fonseca <jose.r.fonseca@gmail.com>
+    Date:   Sat Jul 9 11:07:14 2011 +0100
+    
+        glut: Remove GLUT source.
+    
+        Most distros ship freeglut, and most people don't care one vs the other,
+        and it hasn't been really maintained.
+    
+        So it is better to have Mesa GLUT be revisioned and built separately
+        from Mesa.
+
diff --git a/source/x/freeglut/freeglut.SlackBuild b/source/x/freeglut/freeglut.SlackBuild
new file mode 100755
index 00000000..e209f82e
--- /dev/null
+++ b/source/x/freeglut/freeglut.SlackBuild
@@ -0,0 +1,97 @@
+#!/bin/sh
+
+# Slackware build script for freeglut
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=freeglut
+VERSION=${VERSION:-2.8.0}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --disable-static \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/html
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README TODO \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a doc/*.{html,png} $PKG/usr/doc/$PRGNAM-$VERSION/html
+find $PKG/usr/doc -type f -exec chmod 0644 {} \;
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/x/freeglut/slack-desc b/source/x/freeglut/slack-desc
new file mode 100644
index 00000000..9fcda6f5
--- /dev/null
+++ b/source/x/freeglut/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+freeglut: freeglut (alternative GLUT library)
+freeglut:
+freeglut: freeglut is a completely OpenSourced alternative to the OpenGL 
+freeglut: Utility Toolkit (GLUT) library.  GLUT (and hence freeglut) allows 
+freeglut: the user to create and manage windows containing OpenGL contexts 
+freeglut: on a wide range of platforms and also read the mouse, keyboard, and 
+freeglut: joystick functions.
+freeglut:
+freeglut: Homepage: http://freeglut.sourceforge.net/
+freeglut:
+freeglut:
diff --git a/source/x/libdrm/libdrm.SlackBuild b/source/x/libdrm/libdrm.SlackBuild
index fff398a1..31181fb5 100755
--- a/source/x/libdrm/libdrm.SlackBuild
+++ b/source/x/libdrm/libdrm.SlackBuild
@@ -60,9 +60,6 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION
 
-# Fix missing definitions in drm_mode.h:
-zcat $CWD/libdrm.uint32_t.diff.gz | patch -p1 --verbose || exit 1
-
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
@@ -79,6 +76,7 @@ CFLAGS="$SLKCFLAGS" \
   --enable-udev \
   --enable-nouveau-experimental-api \
   --enable-vmwgfx-experimental-api \
+  --enable-omap-experimental-api \
   --build=$ARCH-slackware-linux
 
 # Build and install:
diff --git a/source/x/libdrm/libdrm.uint32_t.diff b/source/x/libdrm/libdrm.uint32_t.diff
deleted file mode 100644
index 571d72ac..00000000
--- a/source/x/libdrm/libdrm.uint32_t.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./include/drm/drm_mode.h.orig	2010-01-21 12:45:40.000000000 -0600
-+++ ./include/drm/drm_mode.h	2010-02-22 13:16:36.000000000 -0600
-@@ -307,6 +307,8 @@
- #define DRM_MODE_PAGE_FLIP_EVENT 0x01
- #define DRM_MODE_PAGE_FLIP_FLAGS DRM_MODE_PAGE_FLIP_EVENT
- 
-+#include <stdint.h> /* needed for uint32_t and uint64_t typedefs */
-+
- struct drm_mode_crtc_page_flip {
- 	uint32_t crtc_id;
- 	uint32_t fb_id;
diff --git a/source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild b/source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild
index 9dcecac1..97a92cb4 100755
--- a/source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild
+++ b/source/x/liberation-fonts-ttf/liberation-fonts-ttf.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,9 +21,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=1.06.0.20100721
+VERSION=1.07.2
 ARCH=noarch
-BUILD=3
+BUILD=1
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
diff --git a/source/x/libhangul/libhangul.SlackBuild b/source/x/libhangul/libhangul.SlackBuild
index 92a9ed16..9394cc07 100755
--- a/source/x/libhangul/libhangul.SlackBuild
+++ b/source/x/libhangul/libhangul.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Eric Hameleers , Eindhoven, NL
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Eric Hameleers , Eindhoven, NL
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -32,23 +32,27 @@
 #
 # -----------------------------------------------------------------------------
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
 
 PKGNAM=libhangul
-VERSION=${VERSION:-0.0.12}
+VERSION=${VERSION:-0.1.0}
 BUILD=${BUILD:-1}
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -58,11 +62,19 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
@@ -93,7 +105,7 @@ CFLAGS="$SLKCFLAGS" \
   --disable-static \
   --program-prefix= \
   --program-suffix= \
-  --build=$ARCH-slackware-linux
+  --build=$TARGET
 
 make $NUMJOBS || make || exit 1
 make DESTDIR=$PKG install || exit 1
@@ -129,5 +141,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg --linkadd y --chown n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/libhangul/slack-desc b/source/x/libhangul/slack-desc
index 8d76a757..49b2eec1 100644
--- a/source/x/libhangul/slack-desc
+++ b/source/x/libhangul/slack-desc
@@ -12,7 +12,7 @@ libhangul: This library implements Hangul keyboard input with various types of
 libhangul: Korean keyboards. It is intended to be a base library of Korean
 libhangul: input methods on multiple platforms.
 libhangul:
-libhangul: libhangul home: http://kldp.net/projects/hangul/
+libhangul: libhangul home: http://code.google.com/p/libhangul/
 libhangul:
 libhangul:
 libhangul:
diff --git a/source/x/mesa/get-mesa.sh b/source/x/mesa/get-mesa.sh
index c014d8a1..253deeb4 100755
--- a/source/x/mesa/get-mesa.sh
+++ b/source/x/mesa/get-mesa.sh
@@ -1,5 +1,5 @@
 # Pull a stable branch + patches
-BRANCH=7.9
+BRANCH=7.10
 
 rm -rf mesa
 git clone git://anongit.freedesktop.org/git/mesa/mesa
diff --git a/source/x/mesa/mesa.SlackBuild b/source/x/mesa/mesa.SlackBuild
index 7bdc273e..ca670188 100755
--- a/source/x/mesa/mesa.SlackBuild
+++ b/source/x/mesa/mesa.SlackBuild
@@ -21,14 +21,14 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=mesa
-VERSION=7.9.2
+VERSION=8.0.4
 DEMOVERS=8.0.1
 BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:--j8}
 
 # Be sure this list is up-to-date:
-DRI_DRIVERS="i810,i915,i965,mach64,mga,nouveau,r128,r200,r300,r600,radeon,savage,sis,tdfx,unichrome,swrast"
+DRI_DRIVERS="i915,i965,nouveau,r200,radeon,swrast"
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
@@ -59,11 +59,6 @@ cd $TMP
 rm -rf Mesa-${VERSION}
 
 tar xvf $CWD/MesaLib-${VERSION}.tar.?z* || exit 1
-# If MesaLib came from git, we might already have GLUT.
-if [ ! -d Mesa-${VERSION}/src/glut/glx ]; then
-  tar xvf $CWD/MesaGLUT-${VERSION}.tar.?z* || exit 1
-fi
-
 cd Mesa-$VERSION
 
 # Make sure ownerships and permissions are sane:
@@ -76,21 +71,14 @@ find . \
 
 # Apply patches from git (and maybe elsewhere):
 # Patches obtained by:
-#   git checkout origin/7.9
-#   git format-patch 67aeab0b77fb6be864088e69ea74a010b6543fa1..
+#   git checkout origin/8.0
+#   git format-patch 3d657b14b4cab98a2945904823e78cd8950944f4.. # 8.0.3 release
 if /bin/ls $CWD/patches/*.patch 1> /dev/null 2> /dev/null ; then
   for patch in $CWD/patches/*.patch ; do
     patch -p1 < $patch || exit 1 ; 
   done
 fi
 
-# Revert "i915: Enable ARB_fragment_shader by default."
-# https://bugzilla.redhat.com/show_bug.cgi?id=643399 
-zcat $CWD/patches/i915_fragment_shader_disable.patch.gz | patch -p1 || exit 1
-
-# Allow to build against libdrm-2.4.23:
-zcat $CWD/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz | patch -p1 || exit 1
-
 if [ ! -r configure ]; then
   autoreconf || exit 1
 fi
@@ -104,17 +92,13 @@ CFLAGS="$SLKCFLAGS" \
   --docdir=/usr/doc/mesa-$VERSION \
   --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
   --with-dri-drivers="$DRI_DRIVERS" \
-  --enable-xcb \
-  --enable-gallium-nouveau \
+  --with-gallium-drivers=nouveau,swrast,r300,r600 \
+  --enable-gallium-llvm \
   --build=$ARCH-slackware-linux
 
-#  --enable-gallium-llvm \
-#  --enable-gallium-swrast \
-#  --disable-gallium-svga \
-#  --disable-gallium-i915 \
-#  --disable-gallium-i965 \
-#  --disable-gallium-radeon \
-#  --disable-gallium-r600 \
+# r300 requires llvm
+# Other gallium drivers:
+# galahad,i915,identity,llvmpipe,noop,nv50,nvc0,nvfx,rbug,softpipe,svga,trace
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/x/mesa/patches/i915_fragment_shader_disable.patch b/source/x/mesa/patches/i915_fragment_shader_disable.patch
deleted file mode 100644
index d2aee8e7..00000000
--- a/source/x/mesa/patches/i915_fragment_shader_disable.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e5a4106be7c8b87821f6b5d21fec99a402825740 Mon Sep 17 00:00:00 2001
-From: Robert Hooker <sarvatt@ubuntu.com>
-Date: Wed, 8 Sep 2010 12:33:09 -0400
-Subject: [PATCH] Revert "i915: Enable ARB_fragment_shader by default."
-
-This reverts commit a58514cc9c5cc5867f9140700462c5ac5749550d.
----
- src/mesa/drivers/dri/intel/intel_screen.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/mesa/drivers/dri/intel/intel_screen.c b/src/mesa/drivers/dri/intel/intel_screen.c
-index 0a542a7..8ae2cd2 100644
---- a/src/mesa/drivers/dri/intel/intel_screen.c
-+++ b/src/mesa/drivers/dri/intel/intel_screen.c
-@@ -70,7 +70,7 @@ PUBLIC const char __driConfigOptions[] =
- 	 DRI_CONF_DESC(en, "Enable early Z in classic mode (unstable, 945-only).")
-       DRI_CONF_OPT_END
- 
--      DRI_CONF_OPT_BEGIN(fragment_shader, bool, true)
-+      DRI_CONF_OPT_BEGIN(fragment_shader, bool, false)
- 	 DRI_CONF_DESC(en, "Enable limited ARB_fragment_shader support on 915/945.")
-       DRI_CONF_OPT_END
- 
--- 
-1.7.2
-
diff --git a/source/x/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch b/source/x/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
deleted file mode 100644
index d0ce04d2..00000000
--- a/source/x/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-diff -ur a/src/gallium/drivers/nouveau/nouveau_screen.c b/src/gallium/drivers/nouveau/nouveau_screen.c
---- a/src/gallium/drivers/nouveau/nouveau_screen.c	2010-10-02 00:51:28.000000000 +0200
-+++ b/src/gallium/drivers/nouveau/nouveau_screen.c	2010-12-11 18:18:20.527000045 +0100
-@@ -236,7 +236,7 @@
- 	int ret;
- 
- 	ret = nouveau_channel_alloc(dev, 0xbeef0201, 0xbeef0202,
--				    &screen->channel);
-+				    512*1024, &screen->channel);
- 	if (ret)
- 		return ret;
- 	screen->device = dev;
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_context.c b/src/mesa/drivers/dri/nouveau/nouveau_context.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_context.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_context.c	2010-12-11 18:18:20.528000045 +0100
-@@ -129,7 +129,7 @@
- 
- 	/* Allocate a hardware channel. */
- 	ret = nouveau_channel_alloc(context_dev(ctx), 0xbeef0201, 0xbeef0202,
--				    &nctx->hw.chan);
-+				    512*1024, &nctx->hw.chan);
- 	if (ret) {
- 		nouveau_error("Error initializing the FIFO.\n");
- 		return GL_FALSE;
-Nur in b/src/mesa/drivers/dri/nouveau: nouveau_context.c.orig.
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_surface.c b/src/mesa/drivers/dri/nouveau/nouveau_surface.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_surface.c	2010-04-27 23:41:21.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_surface.c	2010-12-11 18:09:19.750000046 +0100
-@@ -34,8 +34,8 @@
- 		      unsigned flags, unsigned format,
- 		      unsigned width, unsigned height)
- {
--	unsigned tile_mode, cpp = _mesa_get_format_bytes(format);
--	int ret;
-+	unsigned tile_mode = 0, tile_flags = 0;
-+	int ret, cpp = _mesa_get_format_bytes(format);
- 
- 	nouveau_bo_ref(NULL, &s->bo);
- 
-@@ -51,13 +51,21 @@
- 	if (layout == TILED) {
- 		s->pitch = align(s->pitch, 256);
- 		tile_mode = s->pitch;
-+
-+		if (cpp == 4)
-+			tile_flags = NOUVEAU_BO_TILE_32BPP;
-+		else if (cpp == 2)
-+			tile_flags = NOUVEAU_BO_TILE_16BPP;
-+
-+		if (_mesa_get_format_bits(format, GL_DEPTH_BITS))
-+			tile_flags |= NOUVEAU_BO_TILE_ZETA;
-+
- 	} else {
- 		s->pitch = align(s->pitch, 64);
--		tile_mode = 0;
- 	}
- 
- 	ret = nouveau_bo_new_tile(context_dev(ctx), flags, 0, s->pitch * height,
--				  tile_mode, 0, &s->bo);
-+				  tile_mode, tile_flags, &s->bo);
- 	assert(!ret);
- }
- 
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c b/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c	2010-12-11 18:18:20.528000045 +0100
-@@ -32,7 +32,7 @@
- 
- /* Arbitrary pushbuf length we can assume we can get with a single
-  * WAIT_RING. */
--#define PUSHBUF_DWORDS 2048
-+#define PUSHBUF_DWORDS 65536
- 
- /* Functions to set up struct nouveau_array_state from something like
-  * a GL array or index buffer. */
-diff -ur a/src/mesa/drivers/dri/nouveau/nv10_state_fb.c b/src/mesa/drivers/dri/nouveau/nv10_state_fb.c
---- a/src/mesa/drivers/dri/nouveau/nv10_state_fb.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nv10_state_fb.c	2010-12-11 18:15:17.756000046 +0100
-@@ -64,8 +64,8 @@
- 
- 	if (!nfb->lma_bo || nfb->lma_bo->size != size) {
- 		nouveau_bo_ref(NULL, &nfb->lma_bo);
--		nouveau_bo_new(context_dev(ctx), NOUVEAU_BO_VRAM, 0, size,
--			       &nfb->lma_bo);
-+		nouveau_bo_new_tile(context_dev(ctx), NOUVEAU_BO_VRAM, 0, size,
-+				    0, NOUVEAU_BO_TILE_ZETA, &nfb->lma_bo);
- 	}
- 
- 	nouveau_bo_markl(bctx, celsius, NV17TCL_LMA_DEPTH_BUFFER_OFFSET,
diff --git a/source/x/mtdev/mtdev.SlackBuild b/source/x/mtdev/mtdev.SlackBuild
new file mode 100755
index 00000000..e973ed34
--- /dev/null
+++ b/source/x/mtdev/mtdev.SlackBuild
@@ -0,0 +1,97 @@
+#!/bin/sh
+
+# Slackware build script for mtdev
+
+# Copyright 2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=mtdev
+VERSION=${VERSION:-1.1.2}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux \
+  --disable-static
+
+make
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYING ChangeLog INSTALL README \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/x/mtdev/mtdev.url b/source/x/mtdev/mtdev.url
new file mode 100644
index 00000000..f1989e19
--- /dev/null
+++ b/source/x/mtdev/mtdev.url
@@ -0,0 +1 @@
+http://bitmath.org/code/mtdev/
diff --git a/source/x/mtdev/slack-desc b/source/x/mtdev/slack-desc
new file mode 100644
index 00000000..0eaaae9e
--- /dev/null
+++ b/source/x/mtdev/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+mtdev: mtdev (multitouch device library)
+mtdev:
+mtdev: mtdev is a stand-alone library which transforms all variants of
+mtdev: kernel MT events to the slotted type B protocol.  The events put
+mtdev: into mtdev may be from any MT device, specifically type A without
+mtdev: contact tracking, type A with contact tracking, or type B with
+mtdev: contact tracking.
+mtdev: The bulk of the mtdev code has been out there since 2008 as part of
+mtdev: the Multitouch X Driver.  With this package, finger tracking and 
+mtdev: seamless MT protocol handling is available under a free license. 
+mtdev:
diff --git a/source/x/radeon_ucode/radeon_ucode.SlackBuild b/source/x/radeon_ucode/radeon_ucode.SlackBuild
deleted file mode 100755
index 7482b4cc..00000000
--- a/source/x/radeon_ucode/radeon_ucode.SlackBuild
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for radeon_ucode
-
-# Copyright 2010  Robby Workman, Northport, Alabama, USA
-# Copyright 2010, 2011  Patrick Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=radeon_ucode
-VERSION=20110302
-BUILD=${BUILD:-1}
-
-ARCH=noarch
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-rm -rf $PKG
-mkdir -p $PKG/lib/firmware/radeon $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a $CWD/ucode-$VERSION/* $PKG/lib/firmware/radeon
-mv $PKG/lib/firmware/radeon/LICENSE.radeon $PKG/usr/doc/$PKGNAM-$VERSION
-
-chown -R root:root $PKG
-find $PKG \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/x/radeon_ucode/slack-desc b/source/x/radeon_ucode/slack-desc
deleted file mode 100644
index 01810b94..00000000
--- a/source/x/radeon_ucode/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-radeon_ucode: radeon_ucode (microcode/firmware for some Radeon graphics cards)
-radeon_ucode:
-radeon_ucode: radeon_ucode contains the microcode/firmware for some models of
-radeon_ucode: ATI/AMD Radeon graphics cards.  
-radeon_ucode:
-radeon_ucode: http://people.freedesktop.org/~agd5f/radeon_ucode/
-radeon_ucode:
-radeon_ucode:
-radeon_ucode:
-radeon_ucode:
-radeon_ucode:
diff --git a/source/x/radeon_ucode/ucode-20110302/LICENSE.radeon b/source/x/radeon_ucode/ucode-20110302/LICENSE.radeon
deleted file mode 100644
index 2542d649..00000000
--- a/source/x/radeon_ucode/ucode-20110302/LICENSE.radeon
+++ /dev/null
@@ -1,51 +0,0 @@
-Copyright (C) 2009-2011  Advanced Micro Devices, Inc. All rights reserved.
-
-REDISTRIBUTION: Permission is hereby granted, free of any license fees,
-to any person obtaining a copy of this microcode (the "Software"), to
-install, reproduce, copy and distribute copies, in binary form only, of
-the Software and to permit persons to whom the Software is provided to
-do the same, provided that the following conditions are met:
-
-No reverse engineering, decompilation, or disassembly of this Software
-is permitted.
-
-Redistributions must reproduce the above copyright notice, this
-permission notice, and the following disclaimers and notices in the
-Software documentation and/or other materials provided with the
-Software.
-
-DISCLAIMER: THE USE OF THE SOFTWARE IS AT YOUR SOLE RISK.  THE SOFTWARE
-IS PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND AND COPYRIGHT
-HOLDER AND ITS LICENSORS EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS AND
-IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
-COPYRIGHT HOLDER AND ITS LICENSORS DO NOT WARRANT THAT THE SOFTWARE WILL
-MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE
-UNINTERRUPTED OR ERROR-FREE.  THE ENTIRE RISK ASSOCIATED WITH THE USE OF
-THE SOFTWARE IS ASSUMED BY YOU.  FURTHERMORE, COPYRIGHT HOLDER AND ITS
-LICENSORS DO NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE
-OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS,
-ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE.
-
-DISCLAIMER: UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL COPYRIGHT
-HOLDER AND ITS LICENSORS OR ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS
-("AUTHORIZED REPRESENTATIVES") BE LIABLE FOR ANY INCIDENTAL, INDIRECT,
-SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS
-PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE
-LIKE) ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE,
-BREACH OR DEFAULT, INCLUDING THOSE ARISING FROM INFRINGEMENT OR ALLEGED
-INFRINGEMENT OF ANY PATENT, TRADEMARK, COPYRIGHT OR OTHER INTELLECTUAL
-PROPERTY RIGHT EVEN IF COPYRIGHT HOLDER AND ITS AUTHORIZED
-REPRESENTATIVES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  IN
-NO EVENT SHALL COPYRIGHT HOLDER OR ITS AUTHORIZED REPRESENTATIVES TOTAL
-LIABILITY FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION (WHETHER IN
-CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE) EXCEED THE AMOUNT OF
-US$10.
-
-Notice:  The Software is subject to United States export laws and
-regulations.  You agree to comply with all domestic and international
-export laws and regulations that apply to the Software, including but
-not limited to the Export Administration Regulations administered by the
-U.S. Department of Commerce and International Traffic in Arm Regulations
-administered by the U.S. Department of State.  These laws include
-restrictions on destinations, end users and end use.
diff --git a/source/x/scim-anthy/scim-anthy.SlackBuild b/source/x/scim-anthy/scim-anthy.SlackBuild
index 36850635..ee43c38b 100755
--- a/source/x/scim-anthy/scim-anthy.SlackBuild
+++ b/source/x/scim-anthy/scim-anthy.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008, 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,12 +33,22 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-anthy
-VERSION=${VERSION:-1.2.4}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-anthy
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 NUMJOBS=${NUMJOBS:-" -j7 "}
 BUILD=${BUILD:-2}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -52,14 +62,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 
 zcat $CWD/scim-anthy.gcc43.diff.gz | patch -p1 --verbose || exit 1
 
@@ -87,10 +97,10 @@ make $NUMJOBS || make || exit 1
 make DESTDIR=$PKG install || exit 1
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   ABOUT-NLS AUTHORS COPYING ChangeLog DIARY INSTALL NEWS README TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
 
 # Compress the man page(s):
@@ -109,5 +119,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-bridge/scim-bridge.SlackBuild b/source/x/scim-bridge/scim-bridge.SlackBuild
index c3494c8b..8501d9c4 100755
--- a/source/x/scim-bridge/scim-bridge.SlackBuild
+++ b/source/x/scim-bridge/scim-bridge.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008, 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,18 +33,19 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-bridge
-VERSION=${VERSION:-0.4.16}
+PKGNAM=scim-bridge
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -68,14 +69,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 #sed -i -e "s/ -doxygen / doxygen /" $( grep -lr ' -doxygen ' * )
 
 zcat $CWD/patches/scim-bridge-0.4.16-scim-bridge-agent-application.cpp.patch.gz | patch -p1 --verbose || exit 1
@@ -101,7 +102,7 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --sysconfdir=/etc \
   --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --enable-agent \
   --enable-ltdl-install \
   --enable-gtk2-immodule \
@@ -129,10 +130,10 @@ fi
 EOINS
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING* ChangeLog INSTALL NEWS README* doc/LICENSE.* \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
 
 # Compress the man page(s):
@@ -151,5 +152,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-hangul/scim-hangul.SlackBuild b/source/x/scim-hangul/scim-hangul.SlackBuild
index 1731a202..58f17654 100755
--- a/source/x/scim-hangul/scim-hangul.SlackBuild
+++ b/source/x/scim-hangul/scim-hangul.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008, 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,11 +33,21 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-hangul
-VERSION=${VERSION:-0.3.2}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-hangul
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 NUMJOBS=${NUMJOBS:-" -j7 "}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
 
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
@@ -52,17 +62,18 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 
 zcat $CWD/scim-hangul.gcc43.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/scim-hangul.gcc47.diff.gz | patch -p1 --verbose || exit 1
 
 chown -R root:root .
 find . \
@@ -89,10 +100,10 @@ make $NUMJOBS || make || exit 1
 make DESTDIR=$PKG install || exit 1
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING NEWS README ChangeLog \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
 
 # Compress the man page(s):
@@ -111,5 +122,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-hangul/scim-hangul.gcc47.diff b/source/x/scim-hangul/scim-hangul.gcc47.diff
new file mode 100644
index 00000000..7e0c52c6
--- /dev/null
+++ b/source/x/scim-hangul/scim-hangul.gcc47.diff
@@ -0,0 +1,11 @@
+--- ./src/scim_hangul_imengine.cpp.orig	2012-05-11 22:51:39.653751057 -0500
++++ ./src/scim_hangul_imengine.cpp	2012-05-11 22:53:45.793739278 -0500
+@@ -33,6 +33,8 @@
+   #include <config.h>
+ #endif
+ 
++#include <unistd.h>
++
+ #include <scim.h>
+ #include "scim_hangul_imengine.h"
+ 
diff --git a/source/x/scim-input-pad/scim-input-pad.SlackBuild b/source/x/scim-input-pad/scim-input-pad.SlackBuild
index a836a3fa..e5985946 100755
--- a/source/x/scim-input-pad/scim-input-pad.SlackBuild
+++ b/source/x/scim-input-pad/scim-input-pad.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -24,11 +24,21 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-input-pad
-VERSION=${VERSION:-0.1.2}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-input-pad
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-4}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
 if [ "$ARCH" = "i486" ]; then
@@ -50,14 +60,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar xvf $CWD/${PRGNAM}-${VERSION}.tar.?z* || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -85,11 +95,11 @@ make DESTDIR=$PKG install || exit 1
 sed -i -e "s#/usr/lib${LIBDIRSUFFIX}/scim-.*/scim-helper-launcher#$(ls /usr/lib${LIBDIRSUFFIX}/scim-*/scim-helper-launcher)#" $PKG/usr/bin/scim-input-pad
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+  $PKG/usr/doc/$PKGNAM-$VERSION
+chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/*
 
 # Strip binaries:
 cd $PKG
@@ -102,5 +112,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-input-pad/slack-desc b/source/x/scim-input-pad/slack-desc
index add837f7..d6275692 100644
--- a/source/x/scim-input-pad/slack-desc
+++ b/source/x/scim-input-pad/slack-desc
@@ -9,7 +9,7 @@
 scim-input-pad: scim-input-pad (on-screen input pad for scim)
 scim-input-pad:
 scim-input-pad: This is scim-input-pad, which provides an on-screen input pad
-scim-input-pad: to enter symbols and chinese characters.
+scim-input-pad: to enter symbols and Chinese characters.
 scim-input-pad:
 scim-input-pad:
 scim-input-pad:
diff --git a/source/x/scim-m17n/scim-m17n.SlackBuild b/source/x/scim-m17n/scim-m17n.SlackBuild
index e624ca80..cf060221 100755
--- a/source/x/scim-m17n/scim-m17n.SlackBuild
+++ b/source/x/scim-m17n/scim-m17n.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2008, 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,11 +33,21 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-m17n
-VERSION=${VERSION:-0.2.3}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-m17n
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
 if [ "$ARCH" = "i486" ]; then
@@ -59,14 +69,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -91,10 +101,10 @@ make $NUMJOBS || make || exit 1
 make DESTDIR=$PKG install || exit 1
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
 
 # Compress the man page(s):
@@ -119,5 +129,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-pinyin/scim-pinyin.SlackBuild b/source/x/scim-pinyin/scim-pinyin.SlackBuild
index 79337b1e..9eefad63 100755
--- a/source/x/scim-pinyin/scim-pinyin.SlackBuild
+++ b/source/x/scim-pinyin/scim-pinyin.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,12 +33,22 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-pinyin
-VERSION=${VERSION:-0.5.91}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-pinyin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 NUMJOBS=${NUMJOBS:-" -j7 "}
 BUILD=${BUILD:-2}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -52,14 +62,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 
 # Apply fix for our gcc 4.3.x
 zcat $CWD/scim-pinyin.gcc43.diff.gz | patch -p1 --verbose || exit 1
@@ -103,11 +113,11 @@ make DESTDIR=$PKG install || exit 1
 #cd -
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+  $PKG/usr/doc/$PKGNAM-$VERSION
+chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/*
 
 # Compress the man page(s):
 if [ -d $PKG/usr/man ]; then
@@ -125,5 +135,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim-tables/scim-tables.SlackBuild b/source/x/scim-tables/scim-tables.SlackBuild
index 8f577345..a6d219c2 100755
--- a/source/x/scim-tables/scim-tables.SlackBuild
+++ b/source/x/scim-tables/scim-tables.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Copyright 2007  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,11 +33,21 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim-tables
-VERSION=${VERSION:-0.5.9}
-ARCH=${ARCH:-x86_64}
+PKGNAM=scim-tables
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-3}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
 if [ "$ARCH" = "i486" ]; then
@@ -59,14 +69,14 @@ fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.gz || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar -xvf $CWD/${PKGNAM}-${VERSION}.tar.gz || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -92,11 +102,11 @@ make $NUMJOBS || make || exit 1
 make DESTDIR=$PKG install || exit 1
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
   ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+  $PKG/usr/doc/$PKGNAM-$VERSION
+chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/*
 
 # Compress the man page(s):
 if [ -d $PKG/usr/man ]; then
@@ -115,5 +125,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/scim/scim-1.4.9-fix-ltdl.cpp.patch b/source/x/scim/scim-1.4.9-fix-ltdl.cpp.patch
deleted file mode 100644
index 1d9590fd..00000000
--- a/source/x/scim/scim-1.4.9-fix-ltdl.cpp.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- scim-1.4.9/src/ltdl.cpp.bak	2008-11-02 14:42:40.000000000 +0800
-+++ scim-1.4.9/src/ltdl.cpp	2010-09-12 00:23:24.085978400 +0800
-@@ -3361,7 +3361,7 @@
- {
-   lt_dlhandle	handle		= 0;
-   char *	tmp		= 0;
--  char *	ext		= 0;
-+  const char *	ext		= 0;
-   size_t	len;
-   int		errors		= 0;
- 
diff --git a/source/x/scim/scim.SlackBuild b/source/x/scim/scim.SlackBuild
index c0c50fb4..d03adc6e 100755
--- a/source/x/scim/scim.SlackBuild
+++ b/source/x/scim/scim.SlackBuild
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-# Copyright 2006,2007,2008  Eric Hameleers, Eindhoven, NL
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, MN  USA
+# Copyright 2006, 2007, 2008  Eric Hameleers, Eindhoven, NL
+# Copyright 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, MN  USA
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -33,18 +33,19 @@
 # -----------------------------------------------------------------------------
 
 
-PRGNAM=scim
-VERSION=${VERSION:-1.4.9}
-BUILD=${BUILD:-5}
+PKGNAM=scim
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
 if [ "$ARCH" = "i486" ]; then
@@ -68,17 +69,15 @@ NUMJOBS=${NUMJOBS:-" -j7 "}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
-rm -rf ${PRGNAM}-${VERSION}
-tar xvf $CWD/${PRGNAM}-${VERSION}.tar.?z* || exit 1
-cd ${PRGNAM}-${VERSION} || exit 1
-
-zcat $CWD/scim-1.4.9-fix-ltdl.cpp.patch.gz | patch -p1 --verbose || exit 1
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1
+cd ${PKGNAM}-${VERSION} || exit 1
 
 chown -R root:root .
 find . \
@@ -95,6 +94,7 @@ CXXFLAGS="$SLKCFLAGS" \
             --localstatedir=/var \
             --sysconfdir=/etc \
             --disable-static \
+            --with-gtk-version=2 \
             --program-prefix= \
             --program-suffix= \
             --build=$ARCH-slackware-linux
@@ -265,15 +265,15 @@ fi
 EOINS
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/manual/zh_CN/figures
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/manual/zh_CN/figures
 cp -a \
   ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
+  $PKG/usr/doc/$PKGNAM-$VERSION
 # Install documentation and user manual
 cp -a docs/manual/zh_CN/user-manual.html \
-  $PKG/usr/doc/$PRGNAM-$VERSION/manual/zh_CN/
+  $PKG/usr/doc/$PKGNAM-$VERSION/manual/zh_CN/
 cp -a docs/manual/zh_CN/figures/*.png \
-   $PKG/usr/doc/$PRGNAM-$VERSION/manual/zh_CN/figures/
+   $PKG/usr/doc/$PKGNAM-$VERSION/manual/zh_CN/figures/
 
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
@@ -285,5 +285,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 # Build the package:
 cd $PKG
-/sbin/makepkg --prepend --linkadd y --chown n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+/sbin/makepkg --prepend --linkadd y --chown n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
 
diff --git a/source/x/x11-skel/scripts/xwmconfig b/source/x/x11-skel/scripts/xwmconfig
index 944207bf..724242ab 100644
--- a/source/x/x11-skel/scripts/xwmconfig
+++ b/source/x/x11-skel/scripts/xwmconfig
@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 1999, 2002  Patrick Volkerding, Moorhead, Minnesota USA
+# Copyright 1999, 2002, 2012  Patrick Volkerding, Moorhead, Minnesota USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -50,7 +50,7 @@ fi
 if [ "$USER" = "root" ]; then
   BACKTITLE="--backtitle \"Setting system-wide default window manager in /etc/X11/xinit/\""
 else
-  BACKTITLE="--backtitle \"Setting default window manager in $HOME/.xinitrc\""
+  BACKTITLE="--backtitle \"Setting default window manager in $HOME/.xinitrc and $HOME/.xsession\""
 fi
 
 # This stops --backtitle from cluttering the initial install:
@@ -211,13 +211,19 @@ if [ "$USER" = "root" ]; then
   fi
 fi
 
-# Also set up a new $HOME/.xinitrc:
+# Also set up a new $HOME/.xinitrc and $HOME/.xinitrc:
 if [ -r /etc/X11/xinit/$OUTPUT -a ! "$HOME" = "/" ]; then
   if [ -r $HOME/.xinitrc ]; then
     rm -f $HOME/.xinitrc-backup
     mv $HOME/.xinitrc $HOME/.xinitrc-backup
   fi
   cat /etc/X11/xinit/$OUTPUT > $HOME/.xinitrc
+  if [ -r $HOME/.xsession ]; then
+    rm -f $HOME/.xsession-backup
+    mv $HOME/.xsession $HOME/.xsession-backup
+  fi
+  cat /etc/X11/xinit/$OUTPUT > $HOME/.xsession
+  chmod 755 $HOME/.xsession
 fi
 
 rm -f $TMP/tmpscript.sh $TMP/output
diff --git a/source/x/x11-skel/x11-skel.SlackBuild b/source/x/x11-skel/x11-skel.SlackBuild
index cd8559b7..98381b68 100755
--- a/source/x/x11-skel/x11-skel.SlackBuild
+++ b/source/x/x11-skel/x11-skel.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=7.4
-BUILD=${BUILD:-2}
+VERSION=7.7
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/x/x11/build/libX11 b/source/x/x11/build/libXaw3d
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/libX11
+++ b/source/x/x11/build/libXaw3d
diff --git a/source/x/x11/build/xf86-video-cirrus b/source/x/x11/build/xcb-proto
index 00750edc..00750edc 100644
--- a/source/x/x11/build/xf86-video-cirrus
+++ b/source/x/x11/build/xcb-proto
diff --git a/source/x/x11/build/xcompmgr b/source/x/x11/build/xdm
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/xcompmgr
+++ b/source/x/x11/build/xdm
diff --git a/source/x/x11/build/xf86-input-acecad b/source/x/x11/build/xf86-input-wacom
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/xf86-input-acecad
+++ b/source/x/x11/build/xf86-input-wacom
diff --git a/source/x/x11/build/xf86-input-penmount b/source/x/x11/build/xf86-video-apm
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/xf86-input-penmount
+++ b/source/x/x11/build/xf86-video-apm
diff --git a/source/x/x11/build/xf86-video-openchrome b/source/x/x11/build/xf86-video-chips
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/xf86-video-openchrome
+++ b/source/x/x11/build/xf86-video-chips
diff --git a/source/x/x11/build/xf86-video-i740 b/source/x/x11/build/xf86-video-i740
index 00750edc..b8626c4c 100644
--- a/source/x/x11/build/xf86-video-i740
+++ b/source/x/x11/build/xf86-video-i740
@@ -1 +1 @@
-3
+4
diff --git a/source/x/x11/build/xf86-video-mach64 b/source/x/x11/build/xf86-video-mach64
deleted file mode 100644
index 00750edc..00000000
--- a/source/x/x11/build/xf86-video-mach64
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/source/x/x11/build/xf86-video-r128 b/source/x/x11/build/xf86-video-r128
deleted file mode 100644
index 00750edc..00000000
--- a/source/x/x11/build/xf86-video-r128
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/source/x/x11/build/xf86-video-s3 b/source/x/x11/build/xf86-video-s3
index 00750edc..b8626c4c 100644
--- a/source/x/x11/build/xf86-video-s3
+++ b/source/x/x11/build/xf86-video-s3
@@ -1 +1 @@
-3
+4
diff --git a/source/x/x11/build/xf86-video-s3virge b/source/x/x11/build/xf86-video-s3virge
deleted file mode 100644
index 00750edc..00000000
--- a/source/x/x11/build/xf86-video-s3virge
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/source/x/x11/build/xf86-video-radeonhd b/source/x/x11/build/xf86-video-sisusb
index 0cfbf088..0cfbf088 100644
--- a/source/x/x11/build/xf86-video-radeonhd
+++ b/source/x/x11/build/xf86-video-sisusb
diff --git a/source/x/x11/build/xf86-video-tdfx b/source/x/x11/build/xf86-video-tdfx
deleted file mode 100644
index 00750edc..00000000
--- a/source/x/x11/build/xf86-video-tdfx
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/source/x/x11/build/xf86-video-tga b/source/x/x11/build/xf86-video-tga
index 0cfbf088..b8626c4c 100644
--- a/source/x/x11/build/xf86-video-tga
+++ b/source/x/x11/build/xf86-video-tga
@@ -1 +1 @@
-2
+4
diff --git a/source/x/x11/build/xf86-video-tseng b/source/x/x11/build/xf86-video-tseng
new file mode 100644
index 00000000..0cfbf088
--- /dev/null
+++ b/source/x/x11/build/xf86-video-tseng
@@ -0,0 +1 @@
+2
diff --git a/source/x/x11/build/xf86-video-v4l b/source/x/x11/build/xf86-video-v4l
index b8626c4c..7ed6ff82 100644
--- a/source/x/x11/build/xf86-video-v4l
+++ b/source/x/x11/build/xf86-video-v4l
@@ -1 +1 @@
-4
+5
diff --git a/source/x/x11/build/xf86-video-vesa b/source/x/x11/build/xf86-video-vesa
deleted file mode 100644
index 00750edc..00000000
--- a/source/x/x11/build/xf86-video-vesa
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/source/x/x11/build/xf86-video-voodoo b/source/x/x11/build/xf86-video-voodoo
new file mode 100644
index 00000000..0cfbf088
--- /dev/null
+++ b/source/x/x11/build/xf86-video-voodoo
@@ -0,0 +1 @@
+2
diff --git a/source/x/x11/build/xf86-video-xgi b/source/x/x11/build/xf86-video-xgi
new file mode 100644
index 00000000..0cfbf088
--- /dev/null
+++ b/source/x/x11/build/xf86-video-xgi
@@ -0,0 +1 @@
+2
diff --git a/source/x/x11/build/xorg-server b/source/x/x11/build/xorg-server
new file mode 100644
index 00000000..0cfbf088
--- /dev/null
+++ b/source/x/x11/build/xorg-server
@@ -0,0 +1 @@
+2
diff --git a/source/x/x11/build/xpyb b/source/x/x11/build/xpyb
new file mode 100644
index 00000000..0cfbf088
--- /dev/null
+++ b/source/x/x11/build/xpyb
@@ -0,0 +1 @@
+2
diff --git a/source/x/x11/configure/compiz b/source/x/x11/configure/compiz
index aebd49a2..8a960f3d 100644
--- a/source/x/x11/configure/compiz
+++ b/source/x/x11/configure/compiz
@@ -11,6 +11,6 @@ CXXFLAGS=$SLKCFLAGS \
   --disable-static \
   --disable-gconf \
   --disable-kde \
-  --enable-kde4 \
+  --disable-kde4 \
   --enable-librsvg \
   --build=$ARCH-slackware-linux
diff --git a/source/x/x11/configure/libXaw3d b/source/x/x11/configure/libXaw3d
new file mode 100644
index 00000000..0d802fa3
--- /dev/null
+++ b/source/x/x11/configure/libXaw3d
@@ -0,0 +1,16 @@
+CFLAGS=$SLKCFLAGS \
+CXXFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} \
+  --disable-static \
+  --enable-multiplane-bitmaps \
+  --enable-gray-stipples \
+  --enable-arrow-scrollbars \
+  --enable-internationalization \
+  --build=$ARCH-slackware-linux
diff --git a/source/x/x11/configure/xf86-video-ati b/source/x/x11/configure/xf86-video-ati
deleted file mode 100644
index 0eacb0c3..00000000
--- a/source/x/x11/configure/xf86-video-ati
+++ /dev/null
@@ -1,21 +0,0 @@
-xserver_source="/tmp/x11-build/xorg-server-1.9.3"
-
-# Let these just fail to build.  In any case, an "exit 1"
-# here is just plain wrong.
-#if [ ! -d "$xserver_source" ]; then
-#  echo "$xserver_source does not exist, and you need it."
-#  exit 1
-#fi
-
-CFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \
-CXXFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --infodir=/usr/info \
-  --mandir=/usr/man \
-  --disable-static \
-  --with-xserver-source=${xserver_source} \
-  --build=$ARCH-slackware-linux
diff --git a/source/x/x11/configure/xorg-server b/source/x/x11/configure/xorg-server
index cf9bd843..778d7668 100644
--- a/source/x/x11/configure/xorg-server
+++ b/source/x/x11/configure/xorg-server
@@ -27,14 +27,15 @@ CFLAGS="$SLKCFLAGS" \
   --with-int10=x86emu \
   --with-default-font-path="${DEF_FONTPATH}" \
   --with-module-dir=/usr/lib${LIBDIRSUFFIX}/xorg/modules \
-  --with-dri-driver-path=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
-  --with-os-name="Slackware 13.37" \
+  --with-os-name="Slackware 14.0" \
   --with-os-vendor="Slackware Linux Project" \
   --with-xkb-path=/etc/X11/xkb \
   --with-xkb-output=/var/lib/xkb \
   $BUILD_SERVERS \
   --build=$ARCH-slackware-linux
 
+#  --with-dri-driver-path=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri
+
 if [ "$ARCH" = "x86_64" ]; then
   # To prevent the error "No rule to make target `-ldl'"
   sed -i -e 's#-ldl##' hw/xfree86/Makefile
diff --git a/source/x/x11/doinst.sh/xdm b/source/x/x11/doinst.sh/xdm
index bb08dc5f..e1d72520 100644
--- a/source/x/x11/doinst.sh/xdm
+++ b/source/x/x11/doinst.sh/xdm
@@ -1,15 +1,18 @@
-#!/bin/sh
 config() {
   NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
   # If there's no config file by that name, mv it over:
   if [ ! -r $OLD ]; then
     mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
     rm $NEW
   fi
   # Otherwise, we leave the .new copy for the admin to consider...
 }
-config etc/X11/xdm/xdm-config.new
-config etc/X11/xdm/Xservers.new
-config etc/X11/xdm/Xsession.new
+for conffile in \
+  Xaccess Xreset Xresources Xservers Xsession Xsetup_0 Xstartup Xwilling \
+  GiveConsole TakeConsole chooser xdm-config ../app-defaults/Chooser ;
+do
+  config etc/X11/xdm/${conffile}.new
+done
+
diff --git a/source/x/x11/modularize b/source/x/x11/modularize
index 47da583f..d6eb2f68 100644
--- a/source/x/x11/modularize
+++ b/source/x/x11/modularize
@@ -1,7 +1,6 @@
 # If a package is listed here, it will be built apart from the
 # usual "grab bag" package that's made from each source directory.
 
-applewmproto
 appres
 bdftopcf
 beforelight
@@ -9,7 +8,6 @@ bigreqsproto
 bitmap
 compiz
 compositeproto
-constype
 damageproto
 dmxproto
 dri2proto
@@ -67,16 +65,15 @@ imake
 inputproto
 intel-gpu-tools
 kbproto
-libAppleWM
 libFS
 libICE
 libSM
-libWindowsWM
 libX11
 libXScrnSaver
-libXTrap
 libXau
 libXaw
+libXaw3d
+libXcm
 libXcomposite
 libXcursor
 libXdamage
@@ -92,8 +89,6 @@ libXinerama
 libXmu
 libXp
 libXpm
-libXprintAppUtil
-libXprintUtil
 libXrandr
 libXrender
 libXres
@@ -110,38 +105,31 @@ libpciaccess
 libpthread-stubs
 libxcb
 libxkbfile
-libxkbui
 listres
 lndir
 luit
 makedepend
-mkcfm
 mkcomposecache
 mkfontdir
 mkfontscale
 oclock
 pixman
 printproto
-proxymngr
 randrproto
 recordproto
 rendercheck
 renderproto
 resourceproto
 rgb
-rstart
-scripts
 scrnsaverproto
 sessreg
 setxkbmap
 showfont
 smproxy
-trapproto
 twm
 util-macros
 videoproto
 viewres
-windowswmproto
 x11perf
 xauth
 xbacklight
@@ -150,6 +138,10 @@ xbitmaps
 xcalc
 xcb-proto
 xcb-util
+xcb-util-image
+xcb-util-keysyms
+xcb-util-renderutil
+xcb-util-wm
 xclipboard
 xclock
 xcmiscproto
@@ -169,17 +161,13 @@ xextproto
 xeyes
 xf86-input-acecad
 xf86-input-aiptek
-xf86-input-citron
 xf86-input-evdev
 xf86-input-joystick
-xf86-input-keyboard
-xf86-input-mouse
 xf86-input-penmount
 xf86-input-synaptics
 xf86-input-vmmouse
 xf86-input-void
 xf86-input-wacom
-xf86-video-geode
 xf86-video-apm
 xf86-video-ark
 xf86-video-ast
@@ -187,19 +175,19 @@ xf86-video-ati
 xf86-video-chips
 xf86-video-cirrus
 xf86-video-dummy
-xf86-video-fbdev
+xf86-video-geode
 xf86-video-glint
 xf86-video-i128
 xf86-video-i740
-xf86-video-i810
 xf86-video-intel
 xf86-video-mach64
 xf86-video-mga
+xf86-video-modesetting
 xf86-video-neomagic
 xf86-video-nouveau
-xf86-video-nsc
 xf86-video-nv
 xf86-video-openchrome
+xf86-video-qxl
 xf86-video-r128
 xf86-video-rendition
 xf86-video-s3
@@ -208,13 +196,6 @@ xf86-video-savage
 xf86-video-siliconmotion
 xf86-video-sis
 xf86-video-sisusb
-xf86-video-sunbw2
-xf86-video-suncg14
-xf86-video-suncg3
-xf86-video-suncg6
-xf86-video-sunffb
-xf86-video-sunleo
-xf86-video-suntcx
 xf86-video-tdfx
 xf86-video-tga
 xf86-video-trident
@@ -223,22 +204,17 @@ xf86-video-v4l
 xf86-video-vesa
 xf86-video-vmware
 xf86-video-voodoo
-xf86-video-wsfb
 xf86-video-xgi
-xf86-video-xgixp
 xf86bigfontproto
 xf86dga
 xf86dgaproto
 xf86driproto
 xf86miscproto
-xf86rushproto
 xf86vidmodeproto
 xfd
-xfindproxy
 xfontsel
 xfs
 xfsinfo
-xfwp
 xgamma
 xgc
 xhost
@@ -265,27 +241,23 @@ xmore
 xorg-cf-files
 xorg-docs
 xorg-server
+xorg-server-xephyr
+xorg-server-xnest
+xorg-server-xvfb
 xorg-sgml-doctools
-xphelloworld
-xplsprinters
 xpr
-xprehashprinterlist
 xprop
 xproto
-xproxymanagementprotocol
 xpyb
 xrandr
 xrdb
 xrefresh
 xscope
 xset
-xsetmode
-xsetpointer
 xsetroot
 xsm
 xstdcmap
 xtrans
-xtrap
 xvidtune
 xvinfo
 xwd
diff --git a/source/x/x11/noarch b/source/x/x11/noarch
index 79eb0e56..480ffc26 100644
--- a/source/x/x11/noarch
+++ b/source/x/x11/noarch
@@ -56,26 +56,21 @@ randrproto
 recordproto
 renderproto
 resourceproto
-scripts
 scrnsaverproto
-trapproto
 ttf-indic-fonts
 util-macros
 videoproto
 x11-skel
-xcb-proto
 xcmiscproto
 xcursor-themes
 xf86bigfontproto
 xf86dgaproto
 xf86driproto
 xf86miscproto
-xf86rushproto
 xf86vidmodeproto
 xineramaproto
 xkeyboard-config
 xorg-cf-files
 xorg-docs
 xproto
-xproxymanagementprotocol
 xtrans
diff --git a/source/x/x11/patch/xf86-video-chips.patch b/source/x/x11/patch/xf86-video-chips.patch
new file mode 100644
index 00000000..a5a54ac0
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips.patch
@@ -0,0 +1,4 @@
+for patchfile in $CWD/patch/xf86-video-chips/*.patch ; do 
+  cat $patchfile | patch -p1 --verbose \
+    || { touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed ; continue ; } ;
+done
diff --git a/source/x/x11/patch/xf86-video-chips/0001-chips-gut-the-overlay-8-16-support-from-driver.patch b/source/x/x11/patch/xf86-video-chips/0001-chips-gut-the-overlay-8-16-support-from-driver.patch
new file mode 100644
index 00000000..a52e4103
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0001-chips-gut-the-overlay-8-16-support-from-driver.patch
@@ -0,0 +1,588 @@
+From e4bd864898fd276a62dac05cdfff394e98434f02 Mon Sep 17 00:00:00 2001
+From: Dave Airlie <airlied@redhat.com>
+Date: Tue, 29 Mar 2011 13:53:31 +1000
+Subject: [PATCH 1/9] chips: gut the overlay 8/16 support from driver.
+
+This driver is for chips that were bought by Intel in 1997,
+this feature means maintaining a lot of code in the X server
+for little gain.
+
+Drop it like its hot.
+
+Signed-off-by: Dave Airlie <airlied@redhat.com>
+Reviewed-by: Adam Jackson <ajax@redhat.com>
+---
+ man/chips.man   |    3 -
+ src/ct_accel.c  |   46 ++---------
+ src/ct_driver.c |  234 ++++++-------------------------------------------------
+ src/ct_driver.h |    1 -
+ src/ct_video.c  |    3 +-
+ 5 files changed, 28 insertions(+), 259 deletions(-)
+
+diff --git a/man/chips.man b/man/chips.man
+index 740af38..0c022ee 100644
+--- a/man/chips.man
++++ b/man/chips.man
+@@ -165,9 +165,6 @@ Force the use of memory mapped IO where it can be used. Default: off
+ Force driver to leave centering and stretching registers alone. This
+ can fix some laptop suspend/resume problems. Default: off
+ .TP
+-.BI "Option \*qOverlay\*q"
+-Enable 8+24 overlay mode.  Only appropriate for depth 24.  Default: off.
+-.TP
+ .BI "Option \*qColorKey\*q \*q" integer \*q
+ Set the colormap index used for the transparency key for the depth 8 plane
+ when operating in 8+16 overlay mode.  The value must be in the range
+diff --git a/src/ct_accel.c b/src/ct_accel.c
+index 3920b0a..4b5776a 100644
+--- a/src/ct_accel.c
++++ b/src/ct_accel.c
+@@ -428,19 +428,7 @@ chips_imagewrite:
+         infoPtr->ImageWriteFlags |= NO_PLANEMASK;
+ #endif
+ 
+-
+-#ifdef CHIPS_HIQV
+-    if (XAAInit(pScreen, infoPtr)) {
+-	if (cPtr->Flags & ChipsOverlay8plus16)      
+-	    return(XAAInitDualFramebufferOverlay(pScreen,
+-						 CTNAME(DepthChange)));
+-	else
+-	    return TRUE;
+-    } else
+-	return FALSE;
+-#else
+     return(XAAInit(pScreen, infoPtr));
+-#endif
+ }
+ 
+ #ifdef CHIPS_HIQV
+@@ -1243,11 +1231,6 @@ CTNAME(SubsequentScreenToScreenColorExpandFill)(ScrnInfoPtr pScrn,
+ #endif
+     w *= cAcl->BytesPerPixel;
+     ctBLTWAIT;
+-#ifdef CHIPS_HIQV
+-    if ((y >= pScrn->virtualY) && (cPtr->Flags & ChipsOverlay8plus16) &&
+-	    (pScrn->depth == 8))
+-	ctSETPITCH(cAcl->PitchInBytes << 1, cAcl->PitchInBytes);
+-#endif
+     ctSETSRCADDR(srcaddr);
+     ctSETDSTADDR(destaddr);
+ #ifdef CHIPS_HIQV
+@@ -1271,10 +1254,6 @@ CTNAME(SetupForColor8x8PatternFill)(ScrnInfoPtr pScrn, int patx, int paty,
+     patternaddr = (paty * pScrn->displayWidth + 
+ 		   (patx & ~0x3F)) * cAcl->BytesPerPixel;
+     cAcl->patternyrot = (patx & 0x3F) >> 3;
+-#ifdef CHIPS_HIQV
+-    if (cPtr->Flags & ChipsOverlay8plus16)
+-	patternaddr += cPtr->FbOffset16;
+-#endif
+ 
+     ctBLTWAIT;
+     ctSETPATSRCADDR(patternaddr);
+@@ -1338,10 +1317,7 @@ CTNAME(SetupForMono8x8PatternFill)(ScrnInfoPtr pScrn, int patx, int paty,
+ 
+ #ifdef CHIPS_HIQV
+     patternaddr = paty * pScrn->displayWidth + patx;
+-    if (cPtr->Flags & ChipsOverlay8plus16)
+-	patternaddr = patternaddr * 2 + cPtr->FbOffset16;
+-    else
+-	patternaddr *= cAcl->BytesPerPixel;
++    patternaddr *= cAcl->BytesPerPixel;
+ #else
+     patternaddr = (paty * pScrn->displayWidth + patx) * cAcl->BytesPerPixel;
+ #endif
+@@ -1593,10 +1569,7 @@ CTNAME(WritePixmap)(ScrnInfoPtr pScrn, int x, int y, int w, int h,
+     dwords = (((skipleft  + bytesPerLine + 0x7) & ~0x7)) >> 2;
+     destaddr = (y * pScrn->displayWidth + x) * (bpp >> 3);
+     destpitch = pScrn->displayWidth * (bpp >> 3);
+-    if ((y >= pScrn->virtualY) && (cPtr->Flags & ChipsOverlay8plus16))
+-	destaddr += cPtr->FbOffset16;
+-    else
+-	destaddr += cAcl->FbOffset;
++    destaddr += cAcl->FbOffset;
+ 
+     ctBLTWAIT;
+ 
+@@ -1681,10 +1654,7 @@ CTNAME(WritePixmap)(ScrnInfoPtr pScrn, int x, int y, int w, int h,
+ 	y++;
+ 
+ 	destaddr = (y * pScrn->displayWidth + x) * (bpp >> 3);
+-	if ((y >= pScrn->virtualY) && (cPtr->Flags & ChipsOverlay8plus16))
+-	    destaddr += cPtr->FbOffset16;
+-	else
+-	    destaddr += cAcl->FbOffset;
++	destaddr += cAcl->FbOffset;
+ 
+ 	ctBLTWAIT;
+ 	ctSETDSTADDR(destaddr);
+@@ -1717,10 +1687,7 @@ CTNAME(ReadPixmap)(ScrnInfoPtr pScrn, int x, int y, int w, int h,
+     dwords = (((bytesPerLine + 0x7) & ~0x7)) >> 2;
+     srcaddr = (y * pScrn->displayWidth + x) * (bpp >> 3);
+     srcpitch = pScrn->displayWidth * (bpp >> 3);
+-    if ((y >= pScrn->virtualY) && (cPtr->Flags & ChipsOverlay8plus16))
+-	srcaddr += cPtr->FbOffset16;
+-    else
+-	srcaddr += cAcl->FbOffset;
++    srcaddr += cAcl->FbOffset;
+ 
+     ctBLTWAIT;
+     ctSETROP( ctDSTSYSTEM | ctLEFT2RIGHT | ctTOP2BOTTOM | 
+@@ -1755,10 +1722,7 @@ CTNAME(ReadPixmap)(ScrnInfoPtr pScrn, int x, int y, int w, int h,
+ 	dst += dstwidth;
+ 	y++;
+ 	srcaddr = (y * pScrn->displayWidth + x) * (bpp >> 3);
+-	if ((y >= pScrn->virtualY) && (cPtr->Flags & ChipsOverlay8plus16))
+-	    srcaddr += cPtr->FbOffset16;
+-	else
+-	    srcaddr += cAcl->FbOffset;
++	srcaddr += cAcl->FbOffset;
+ 	ctBLTWAIT;
+ 	ctSETSRCADDR(srcaddr);
+ 	ctSETHEIGHTWIDTHGO(h, bytesPerLine);
+diff --git a/src/ct_driver.c b/src/ct_driver.c
+index 6624b79..08df050 100644
+--- a/src/ct_driver.c
++++ b/src/ct_driver.c
+@@ -1639,55 +1639,15 @@ chipsPreInitHiQV(ScrnInfoPtr pScrn, int flags)
+ 	}
+     }
+     
+-    if ((s = xf86GetOptValString(cPtr->Options, OPTION_OVERLAY))) {
+-	if (!*s || !xf86NameCmp(s, "8,16") || !xf86NameCmp(s, "16,8")) {
+-	  if (pScrn->bitsPerPixel == 16) {
+-	    if (cPtr->Flags & ChipsLinearSupport) {
+-		cPtr->Flags |= ChipsOverlay8plus16;
+-		if(!xf86GetOptValInteger(
+-			cPtr->Options, OPTION_COLOR_KEY, &(pScrn->colorKey)))
+-		    pScrn->colorKey = TRANSPARENCY_KEY;
+-		pScrn->overlayFlags = OVERLAY_8_16_DUALFB;
+-		xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, 
+-			   "PseudoColor overlay enabled.\n");
+-		if (!xf86IsOptionSet(cPtr->Options, OPTION_LCD_STRETCH))
+-		    xf86DrvMsg(pScrn->scrnIndex, X_WARNING, 
+-			   "                             - Forcing option \"Stretch\" \"ON\".\n");
+-		if (!xf86IsOptionSet(cPtr->Options, OPTION_LCD_CENTER))
+-		    xf86DrvMsg(pScrn->scrnIndex, X_WARNING, 
+-			   "                             - Forcing option \"LcdCenter\" \"OFF\".\n");
+-		if (cPtr->Flags & ChipsShadowFB) {
+-		    xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
+-		           "                             - Disabling \"Shadow Framebuffer\".\n");
+-		    xf86DrvMsg(pScrn->scrnIndex, X_WARNING, 
+-			   "                               Not support with option \"8Plus16\".\n");
+-		    cPtr->Flags &= ~ChipsShadowFB;
+-		    cPtr->Rotate = 0;
+-		}
+-	    } else {
+-		xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Option \"Overlay\" ignored. Not supported without linear addressing\n");
+-	    }
+-	  } else {
+-	    xf86DrvMsg(pScrn->scrnIndex, X_WARNING, 
+-		"Option \"Overlay\" is not supported in this configuration\n");
+-	  }
+-	} else {
+-	    xf86DrvMsg(pScrn->scrnIndex, X_WARNING, 
+-		"\"%s\" is not a valid value for Option \"Overlay\"\n", s); 
+-	}
+-    }
+-
+-    if (!(cPtr->Flags & ChipsOverlay8plus16)) {
+-	if(xf86GetOptValInteger(cPtr->Options, OPTION_VIDEO_KEY,
+-		&(cPtr->videoKey))) {
+-	    xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n",
++    if(xf86GetOptValInteger(cPtr->Options, OPTION_VIDEO_KEY,
++	&(cPtr->videoKey))) {
++         xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n",
+ 		cPtr->videoKey);
+-	} else {
+-	    cPtr->videoKey =  (1 << pScrn->offset.red) | 
++    } else {
++       cPtr->videoKey =  (1 << pScrn->offset.red) | 
+ 			(1 << pScrn->offset.green) |
+ 			(((pScrn->mask.blue >> pScrn->offset.blue) - 1)
+ 			<< pScrn->offset.blue); 
+-	}
+     }
+ 
+     if (cPtr->Flags & ChipsShadowFB) {
+@@ -2335,28 +2295,16 @@ chipsPreInitHiQV(ScrnInfoPtr pScrn, int flags)
+     /* and 32bits on the others. Thus multiply by a suitable factor      */  
+     if (cPtr->Flags & Chips64BitMemory) {
+ 	if (cPtr->FrameBufferSize && (cPtr->PanelType & ChipsLCD))
+-	    if (cPtr->Flags & ChipsOverlay8plus16 )
+-		cPtr->MaxClock = min(cPtr->MaxClock, MemClk->Clk * 8 * 0.7 / 4);
+-	    else
+ 		cPtr->MaxClock = min(cPtr->MaxClock,
+ 			     MemClk->Clk * 8 * 0.7 / (bytesPerPixel + 1));
+ 	else
+-	    if (cPtr->Flags & ChipsOverlay8plus16)
+-		cPtr->MaxClock = min(cPtr->MaxClock, MemClk->Clk * 8 * 0.7 / 3);
+-	    else
+ 		cPtr->MaxClock = min(cPtr->MaxClock, 
+ 			     MemClk->Clk * 8 * 0.7 / bytesPerPixel);
+     } else {
+ 	if (cPtr->FrameBufferSize && (cPtr->PanelType & ChipsLCD))
+-	    if (cPtr->Flags & ChipsOverlay8plus16 )
+-		cPtr->MaxClock = min(cPtr->MaxClock, MemClk->Clk * 4 * 0.7 / 4);
+-	    else
+ 		cPtr->MaxClock = min(cPtr->MaxClock,
+ 			     MemClk->Clk * 4 * 0.7 / (bytesPerPixel + 1));
+ 	else
+-	    if (cPtr->Flags & ChipsOverlay8plus16)
+-		cPtr->MaxClock = min(cPtr->MaxClock, MemClk->Clk * 4 * 0.7 / 3);
+-	    else
+ 		cPtr->MaxClock = min(cPtr->MaxClock, 
+ 			     MemClk->Clk * 4 * 0.7 / bytesPerPixel);
+     }
+@@ -3736,8 +3684,7 @@ CHIPSEnterVT(int scrnIndex, int flags)
+     /* Should we re-save the text mode on each VT enter? */
+     if(!chipsModeInit(pScrn, pScrn->currentMode))
+       return FALSE;
+-    if ((!(cPtr->Flags & ChipsOverlay8plus16)) 
+-	&& (cPtr->Flags & ChipsVideoSupport)
++    if ((cPtr->Flags & ChipsVideoSupport)
+ 	&& (cPtr->Flags & ChipsLinearSupport)) 
+         CHIPSResetVideo(pScrn); 
+ 
+@@ -3788,8 +3735,7 @@ chipsLoadPalette(ScrnInfoPtr pScrn, int numColors, int *indices, LOCO *colors,
+     int i, index, shift ;
+     CHIPSEntPtr cPtrEnt;    
+ 
+-    shift = ((pScrn->depth == 15) && 
+-	     (!(cPtr->Flags & ChipsOverlay8plus16))) ? 3 : 0;
++    shift = (pScrn->depth == 15) ? 3 : 0;
+ 
+     if (cPtr->UseDualChannel) {
+         cPtrEnt = xf86GetEntityPrivate(pScrn->entityList[0],
+@@ -3895,18 +3841,6 @@ chipsLoadPalette16(ScrnInfoPtr pScrn, int numColors, int *indices,
+     hwp->disablePalette(hwp);
+ }
+ 
+-static Bool
+-cfb8_16ScreenInit(ScreenPtr pScreen, pointer pbits16, pointer pbits8,
+-                  int xsize, int ysize, int dpix, int dpiy,
+-                  int width16, int width8)
+-{
+-    return
+-        (fbOverlaySetupScreen(pScreen, pbits16, pbits8, xsize, ysize,
+-                              dpix, dpiy, width16, width8, 16, 8) &&
+-         fbOverlayFinishScreenInit(pScreen, pbits16, pbits8, xsize, ysize,
+-                                   dpix, dpiy, width16, width8, 16, 8, 16, 8));
+-}
+-
+ /* Mandatory */
+ static Bool
+ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+@@ -3947,22 +3881,6 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+     if (!chipsMapMem(pScrn))
+ 	return FALSE;
+ 
+-    /* Setup a pointer to the overlay if needed */
+-    if (cPtr->Flags & ChipsOverlay8plus16) {
+-	cPtr->FbOffset16 = pScrn->displayWidth * pScrn->virtualY;
+-	cPtr->FbSize16 =  (pScrn->displayWidth << 1) * pScrn->virtualY;
+-	if (cPtr->FbSize16 > (cPtr->FbMapSize - cPtr->FrameBufferSize)) {
+-	    xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
+-		   "Too little memory for overlay. Disabling.\n");
+-	    cPtr->Flags &= ~ChipsOverlay8plus16;
+-	}
+-	if ((pScrn->displayWidth > 1024) || (pScrn->virtualY > 1024)) {
+-	    xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
+-		   "Max overlay Width/Height 1024 pixels. Disabling.\n");
+-	    cPtr->Flags &= ~ChipsOverlay8plus16;
+-	}
+-    }
+-
+     /* Setup the MMIO register access functions if need */
+     if (cPtr->UseFullMMIO && cPtr->MMIOBaseVGA) {
+ 	CHIPSSetMmioExtFuncs(cPtr);
+@@ -4035,18 +3953,10 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+     miClearVisualTypes();
+ 
+     /* Setup the visuals we support. */
+-    if ((pScrn->bitsPerPixel == 16) && (cPtr->Flags & ChipsOverlay8plus16)){
+-	if (!miSetVisualTypes(8, PseudoColorMask | GrayScaleMask,
+-			      pScrn->rgbBits, PseudoColor))
+-		return FALSE;
+-	if (!miSetVisualTypes(16, TrueColorMask, pScrn->rgbBits, TrueColor))
+-		return FALSE;
+-    } else {
+-      if (!miSetVisualTypes(pScrn->depth,
++    if (!miSetVisualTypes(pScrn->depth,
+ 			    miGetDefaultVisualMask(pScrn->depth),
+ 			    pScrn->rgbBits, pScrn->defaultVisual))
+-	return FALSE;
+-    }
++        return FALSE;
+     miSetPixmapDepths ();
+ 
+     /*
+@@ -4090,13 +4000,6 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+ 	break;
+ #endif
+     case 16:
+-      if (cPtr->Flags & ChipsOverlay8plus16) {
+-	  ret = cfb8_16ScreenInit(pScreen, (unsigned char *)FBStart + 
+-				  cPtr->FbOffset16, FBStart, width, 
+-				  height, pScrn->xDpi, pScrn->yDpi,
+-				  displayWidth, displayWidth);
+-	  break;
+-      }
+     default:
+ 	ret = fbScreenInit(pScreen, FBStart,
+  		        width,height,
+@@ -4244,9 +4147,6 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+ 	if (pScrn->bitsPerPixel < 8)
+ 	    freespace = allocatebase - pScrn->displayWidth * 
+ 		    pScrn->virtualY / 2;
+-	else if ((pScrn->bitsPerPixel == 16) && (cPtr->Flags & ChipsOverlay8plus16))
+-	    freespace = allocatebase - pScrn->displayWidth * 
+-		    pScrn->virtualY - cPtr->FbSize16;
+ 	else	
+ 	    freespace = allocatebase - pScrn->displayWidth * 
+ 		    pScrn->virtualY * (pScrn->bitsPerPixel >> 3);
+@@ -4369,9 +4269,7 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+ 	    AvailFBArea.y2 = cAcl->CacheEnd /
+ 		(pScrn->displayWidth * (pScrn->bitsPerPixel >> 3));
+ 
+-	    if (!(cPtr->Flags & ChipsOverlay8plus16)) {     
+-		xf86InitFBManager(pScreen, &AvailFBArea); 
+-	    }
++	    xf86InitFBManager(pScreen, &AvailFBArea); 
+ 	}
+ 	if (cPtr->Flags & ChipsAccelSupport) {
+ 	    if (IS_HiQV(cPtr)) {
+@@ -4425,16 +4323,10 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+     if (!miCreateDefColormap(pScreen))
+ 	return FALSE;
+     
+-    if ((cPtr->Flags & ChipsOverlay8plus16) && (pScrn->bitsPerPixel == 16)) {
+-	if(!xf86HandleColormaps(pScreen, 256, pScrn->rgbBits, chipsLoadPalette,
+-		NULL, CMAP_RELOAD_ON_MODE_SWITCH))
+-	    return FALSE;
+-    } else {
+-	if(!xf86HandleColormaps(pScreen, 256, pScrn->rgbBits,
++    if(!xf86HandleColormaps(pScreen, 256, pScrn->rgbBits,
+ 		(pScrn->depth == 16 ? chipsLoadPalette16 : chipsLoadPalette),
+ 		NULL, CMAP_RELOAD_ON_MODE_SWITCH | CMAP_PALETTED_TRUECOLOR))
+-	    return FALSE;
+-    }
++	return FALSE;
+     
+ #ifndef XSERVER_LIBPCIACCESS
+     racflag = RAC_COLORMAP;
+@@ -4448,8 +4340,7 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+ 	xf86SetSilkenMouse(pScreen);
+ #endif
+ 
+-	if ((!(cPtr->Flags & ChipsOverlay8plus16)) 
+-	    && (cPtr->Flags & ChipsVideoSupport)
++	if ((cPtr->Flags & ChipsVideoSupport)
+ 	    && (cPtr->Flags & ChipsLinearSupport)) {
+ 	    CHIPSInitVideo(pScreen);
+     }
+@@ -4522,10 +4413,7 @@ CHIPSAdjustFrame(int scrnIndex, int x, int y, int flags)
+ 	Base >>= 3;
+ 	break;
+     case 16:
+-	if (!(cPtr->Flags & ChipsOverlay8plus16))
+-	   Base >>= 1;
+-	else
+-	   Base >>= 2;
++	Base >>= 1;
+ 	break;
+     case 24:
+ 	if (!IS_HiQV(cPtr))
+@@ -4581,14 +4469,6 @@ CHIPSAdjustFrame(int scrnIndex, int x, int y, int flags)
+ 	cPtr->writeMSS(cPtr, hwp, MSS);
+     }
+ 
+-    if (cPtr->Flags & ChipsOverlay8plus16) {
+-	Base = (Base << 3) & ~(unsigned long)0xF;
+-
+-	cPtr->writeMR(cPtr, 0x22, (cPtr->FbOffset16 + Base) & 0xF8);
+-	cPtr->writeMR(cPtr, 0x23, ((cPtr->FbOffset16 + Base) >> 8) & 0xFF);
+-	cPtr->writeMR(cPtr, 0x24, ((cPtr->FbOffset16 + Base) >> 16) & 0xFF);
+-    }
+-
+ }
+ 
+ /* Mandatory */
+@@ -4652,13 +4532,6 @@ CHIPSValidMode(int scrnIndex, DisplayModePtr mode, Bool verbose, int flags)
+     ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
+     CHIPSPtr cPtr = CHIPSPTR(pScrn);
+ 
+-    if (flags & MODECHECK_FINAL) {
+-    /* Don't subtract FrambufferSize here as it should be subtracted already */
+-    if ((cPtr->Flags & ChipsOverlay8plus16) 
+-      && ((pScrn->videoRam<<10) - pScrn->displayWidth * 3 * pScrn->virtualY 
+-	  < 0))
+-	return MODE_MEM;
+-    }
+     /* The tests here need to be expanded */
+     if ((mode->Flags & V_INTERLACE) && (cPtr->PanelType & ChipsLCD))
+ 	return MODE_NO_INTERLACE;
+@@ -5544,12 +5417,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+     } else {
+ 	ChipsStd->Attribute[0x10] = 0x01;   /* mode */
+     }
+-    if ((pScrn->bitsPerPixel == 16) && (cPtr->Flags & ChipsOverlay8plus16)) {
+-	/* Make sure that the overlay isn't visible in the overscan region */
+-	if (ChipsStd->Attribute[0x11] == pScrn->colorKey)
+-	    ChipsStd->Attribute[0x11] = pScrn->colorKey - 1;
+-    } else
+-	ChipsStd->Attribute[0x11] = 0x00;   /* overscan (border) color */
++    ChipsStd->Attribute[0x11] = 0x00;   /* overscan (border) color */
+     ChipsStd->Attribute[0x12] = 0x0F;   /* enable all color planes */
+     ChipsStd->Attribute[0x13] = 0x00;   /* horiz pixel panning 0 */
+ 
+@@ -5558,8 +5426,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+     /* set virtual screen width */
+     tmp = pScrn->displayWidth >> 3;
+     if (pScrn->bitsPerPixel == 16) {
+-	if (!(cPtr->Flags & ChipsOverlay8plus16))
+-	    tmp <<= 1;		       /* double the width of the buffer */
++	tmp <<= 1;		       /* double the width of the buffer */
+     } else if (pScrn->bitsPerPixel == 24) {
+ 	tmp += tmp << 1;
+     } else if (pScrn->bitsPerPixel == 32) {
+@@ -5688,8 +5555,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+ 
+     /* centering/stretching */
+     if (!xf86ReturnOptValBool(cPtr->Options, OPTION_SUSPEND_HACK, FALSE)) {
+-	if (!xf86ReturnOptValBool(cPtr->Options, OPTION_LCD_STRETCH, FALSE) ||
+-	(cPtr->Flags & ChipsOverlay8plus16)) {
++	if (!xf86ReturnOptValBool(cPtr->Options, OPTION_LCD_STRETCH, FALSE)) {
+ 	    ChipsNew->FR[0x40] &= 0xDF;    /* Disable Horizontal stretching */
+ 	    ChipsNew->FR[0x48] &= 0xFB;    /* Disable vertical stretching */
+ 	    ChipsNew->XR[0xA0] = 0x10;     /* Disable cursor stretching */
+@@ -5709,8 +5575,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+ 	}
+     }
+ 
+-    if ((xf86ReturnOptValBool(cPtr->Options, OPTION_LCD_CENTER, TRUE))
+-		|| (cPtr->Flags & ChipsOverlay8plus16)) {
++    if (xf86ReturnOptValBool(cPtr->Options, OPTION_LCD_CENTER, TRUE)) {
+ 	ChipsNew->FR[0x40] |= 0x3;    /* Enable Horizontal centering */
+ 	ChipsNew->FR[0x48] |= 0x3;    /* Enable Vertical centering */
+     } else {
+@@ -5723,8 +5588,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+ 	ChipsNew->XR[0x82] |=0x02;
+ 
+     /* software mode flag */
+-    ChipsNew->XR[0xE2] = chipsVideoMode(((cPtr->Flags & ChipsOverlay8plus16) ?
+-	8 : pScrn->depth), (cPtr->PanelType & ChipsLCD) ?
++    ChipsNew->XR[0xE2] = chipsVideoMode((pScrn->depth), (cPtr->PanelType & ChipsLCD) ?
+ 	min(mode->CrtcHDisplay, cPtr->PanelSize.HDisplay) :
+ 	mode->CrtcHDisplay, mode->CrtcVDisplay);
+ #ifdef DEBUG
+@@ -5762,7 +5626,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+     	}
+     }	    
+     /* bpp depend */
+-    if ((pScrn->bitsPerPixel == 16) && (!(cPtr->Flags & ChipsOverlay8plus16))) {
++    if (pScrn->bitsPerPixel == 16) {
+ 	ChipsNew->XR[0x81] = (ChipsNew->XR[0x81] & 0xF0) | 0x4;
+ 	if (cPtr->Flags & ChipsGammaSupport)
+ 	    ChipsNew->XR[0x82] |= 0x0C;
+@@ -5915,60 +5779,7 @@ chipsModeInitHiQV(ScrnInfoPtr pScrn, DisplayModePtr mode)
+     /* Turn off multimedia by default as it degrades performance */
+     ChipsNew->XR[0xD0] &= 0x0f;	 
+     
+-    /* Setup the video/overlay */
+-    if (cPtr->Flags & ChipsOverlay8plus16) {
+-	ChipsNew->XR[0xD0] |= 0x10;	/* Force the Multimedia engine on */
+-#ifdef SAR04
+-	ChipsNew->XR[0x4F] = 0x2A;	/* SAR04 >352 pixel overlay width */
+-#endif
+-	ChipsNew->MR[0x1E] &= 0xE0;	/* Set Zoom and Direction */
+-	if ((!(cPtr->PanelType & ChipsLCD)) && (mode->Flags & V_INTERLACE))
+-	    ChipsNew->MR[0x1E] |= 0x10;	/* Interlace */
+-	ChipsNew->MR[0x1F] &= 0x14;	/* Mask reserved bits */
+-	ChipsNew->MR[0x1F] |= 0x08;	/* RGB 16bpp */
+-	if (pScrn->weight.green == 5)
+-	    ChipsNew->MR[0x1F] |= 0x01;	/* RGB 15bpp */
+-
+-	ChipsNew->MR[0x20] &= 0x03;	/* Mask reserved bits */
+-	ChipsNew->MR[0x20] |= 0x80;	/* Auto Centre, Use mem ptr1 */
+-	ChipsNew->MR[0x22] = cPtr->FbOffset16 & 0xF8;	/* Setup Pointer 1 */
+-	ChipsNew->MR[0x23] = (cPtr->FbOffset16 >> 8) & 0xFF;
+-	ChipsNew->MR[0x24] = (cPtr->FbOffset16 >> 16) & 0xFF;
+-	ChipsNew->MR[0x25] = cPtr->FbOffset16 & 0xF8;	/* Setup Pointer 2 */
+-	ChipsNew->MR[0x26] = (cPtr->FbOffset16 >> 8) & 0xFF;
+-	ChipsNew->MR[0x27] = (cPtr->FbOffset16 >> 16) & 0xFF;
+-	ChipsNew->MR[0x28] = (pScrn->displayWidth >> 2) - 1; /* Width */ 
+-	ChipsNew->MR[0x34] = (pScrn->displayWidth >> 2) - 1;
+-
+-	/* Left Edge of Overlay */
+-	ChipsNew->MR[0x2A] = cPtr->OverlaySkewX;
+-	ChipsNew->MR[0x2B] &= 0xF8;	/* Mask reserved bits */
+-	ChipsNew->MR[0x2B] |= ((cPtr->OverlaySkewX >> 8) & 0x7);
+-	/* Right Edge of Overlay */
+-	ChipsNew->MR[0x2C] = (cPtr->OverlaySkewX + pScrn->displayWidth - 
+-							1) & 0xFF;
+-	ChipsNew->MR[0x2D] &= 0xF8;	/* Mask reserved bits */
+-	ChipsNew->MR[0x2D] |= ((cPtr->OverlaySkewX + pScrn->displayWidth -
+-							1) >> 8) & 0x07;
+-	/* Top Edge of Overlay */
+-	ChipsNew->MR[0x2E] = cPtr->OverlaySkewY;
+-	ChipsNew->MR[0x2F] &= 0xF8;
+-	ChipsNew->MR[0x2F] |= ((cPtr->OverlaySkewY >> 8) & 0x7);
+-	/* Bottom Edge of Overlay*/
+-	ChipsNew->MR[0x30] = (cPtr->OverlaySkewY + pScrn->virtualY - 1 )& 0xFF;
+-	ChipsNew->MR[0x31] &= 0xF8;	/* Mask reserved bits */
+-	ChipsNew->MR[0x31] |= ((cPtr->OverlaySkewY + pScrn->virtualY - 
+-							1 ) >> 8) & 0x07;
+-
+-	ChipsNew->MR[0x3C] &= 0x18;	/* Mask reserved bits */
+-	ChipsNew->MR[0x3C] |= 0x07;	/* Enable keyed overlay window */
+-	ChipsNew->MR[0x3D] = 0x00;
+-	ChipsNew->MR[0x3E] = 0x00;
+-	ChipsNew->MR[0x3F] = pScrn->colorKey; /* 8bpp transparency key */
+-	ChipsNew->MR[0x40] = 0xFF;
+-	ChipsNew->MR[0x41] = 0xFF;
+-	ChipsNew->MR[0x42] = 0x00;
+-    } else if (cPtr->Flags & ChipsVideoSupport) {
++    if (cPtr->Flags & ChipsVideoSupport) {
+ #if 0   /* if we do this even though video isn't playing we kill performance */
+ 	ChipsNew->XR[0xD0] |= 0x10;	/* Force the Multimedia engine on */
+ #endif
+@@ -6877,8 +6688,7 @@ chipsRestoreExtendedRegs(ScrnInfoPtr pScrn, CHIPSRegPtr Regs)
+ 	}
+ 
+ 	/* Set SAR04 multimedia register correctly */
+-	if ((cPtr->Flags & ChipsOverlay8plus16)
+-	    || (cPtr->Flags & ChipsVideoSupport)) {
++	if ((cPtr->Flags & ChipsVideoSupport)) {
+ #ifdef SAR04
+ 	    cPtr->writeXR(cPtr, 0x4E, 0x04);
+ 	    if (cPtr->readXR(cPtr, 0x4F) != Regs->XR[0x4F])
+diff --git a/src/ct_driver.h b/src/ct_driver.h
+index d8ce228..10a24d4 100644
+--- a/src/ct_driver.h
++++ b/src/ct_driver.h
+@@ -114,7 +114,6 @@ typedef struct {
+ /* Options flags for the C&T chipsets */
+ #define ChipsHWCursor		0x00001000
+ #define ChipsShadowFB		0x00002000
+-#define ChipsOverlay8plus16	0x00004000
+ #define ChipsUseNewFB		0x00008000
+ 
+ /* Architecture type flags */
+diff --git a/src/ct_video.c b/src/ct_video.c
+index a68acb9..c9e5bb4 100644
+--- a/src/ct_video.c
++++ b/src/ct_video.c
+@@ -56,8 +56,7 @@ CHIPSInitVideo(ScreenPtr pScreen)
+     CHIPSPtr cPtr = CHIPSPTR(pScrn);
+     int num_adaptors;
+ 	
+-    if (!(cPtr->Flags & ChipsOverlay8plus16) &&
+-       (cPtr->Flags & ChipsVideoSupport)) {
++    if ((cPtr->Flags & ChipsVideoSupport)) {
+ 	newAdaptor = CHIPSSetupImageVideo(pScreen);
+ 	CHIPSInitOffscreenImages(pScreen);
+     }
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0002-PciTag-is-unused-when-using-libpciaccess.patch b/source/x/x11/patch/xf86-video-chips/0002-PciTag-is-unused-when-using-libpciaccess.patch
new file mode 100644
index 00000000..6caaa210
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0002-PciTag-is-unused-when-using-libpciaccess.patch
@@ -0,0 +1,29 @@
+From 5f8a7320123255408b393eab9ecfae783920622a Mon Sep 17 00:00:00 2001
+From: Mark Kettenis <kettenis@openbsd.org>
+Date: Mon, 26 Sep 2011 21:26:26 +0200
+Subject: [PATCH 2/9] PciTag is unused when using libpciaccess
+
+Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
+Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
+Reviewed-by: Julien Cristau <jcristau@debian.org>
+---
+ src/ct_driver.h |    2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/ct_driver.h b/src/ct_driver.h
+index 10a24d4..39eeb6e 100644
+--- a/src/ct_driver.h
++++ b/src/ct_driver.h
+@@ -271,7 +271,9 @@ typedef struct {
+ 
+ typedef struct _CHIPSRec {
+     pciVideoPtr		PciInfo;
++#ifndef XSERVER_LIBPCIACCESS
+     PCITAG		PciTag;
++#endif
+     int			Chipset;
+     EntityInfoPtr       pEnt;
+     IOADDRESS		PIOBase;
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0003-Use-malloc-calloc-realloc-free-directly.patch b/source/x/x11/patch/xf86-video-chips/0003-Use-malloc-calloc-realloc-free-directly.patch
new file mode 100644
index 00000000..de379e4d
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0003-Use-malloc-calloc-realloc-free-directly.patch
@@ -0,0 +1,50 @@
+From 7ca1840f39d0216e44fe1ca938cfc3ced048da1d Mon Sep 17 00:00:00 2001
+From: Jeremy Huddleston <jeremyhu@apple.com>
+Date: Tue, 18 Oct 2011 22:24:54 -0700
+Subject: [PATCH 3/9] Use malloc/calloc/realloc/free directly
+
+Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
+---
+ src/ct_driver.c |    8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/src/ct_driver.c b/src/ct_driver.c
+index 08df050..e6538c6 100644
+--- a/src/ct_driver.c
++++ b/src/ct_driver.c
+@@ -949,7 +949,7 @@ CHIPSProbe(DriverPtr drv, int flags)
+ 		}
+ 
+ 	    }
+-	    xfree(usedChips);
++	    free(usedChips);
+ 	}
+     }
+ 
+@@ -981,12 +981,12 @@ CHIPSProbe(DriverPtr drv, int flags)
+ 		pScrn->ValidMode     = CHIPSValidMode;
+ 		foundScreen = TRUE;
+ 	    }
+-	    xfree(usedChips);
++	    free(usedChips);
+ 	}
+     }
+ #endif
+     
+-    xfree(devSections);
++    free(devSections);
+     return foundScreen;
+ }
+ #endif
+@@ -4126,7 +4126,7 @@ CHIPSScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
+ 	}
+ 	if (!miInitializeBanking(pScreen, pScrn->virtualX, pScrn->virtualY,
+ 				 pScrn->displayWidth, pBankInfo)) {
+-	    xfree(pBankInfo);
++	    free(pBankInfo);
+ 	    pBankInfo = NULL;
+ 	    return FALSE;
+ 	}
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0004-configure.ac-Remove-AM_PROG_CC_C_O.patch b/source/x/x11/patch/xf86-video-chips/0004-configure.ac-Remove-AM_PROG_CC_C_O.patch
new file mode 100644
index 00000000..bcf6355a
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0004-configure.ac-Remove-AM_PROG_CC_C_O.patch
@@ -0,0 +1,27 @@
+From f5191838b70d67e991bef3491d2a60915988079c Mon Sep 17 00:00:00 2001
+From: Jeremy Huddleston <jeremyhu@apple.com>
+Date: Tue, 18 Oct 2011 22:37:00 -0700
+Subject: [PATCH 4/9] configure.ac: Remove AM_PROG_CC_C_O
+
+Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
+---
+ configure.ac |    3 ---
+ 1 file changed, 3 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index 225e516..c0ed508 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -44,9 +44,6 @@ XORG_DEFAULT_OPTIONS
+ AC_DISABLE_STATIC
+ AC_PROG_LIBTOOL
+ 
+-# Checks for programs.
+-AM_PROG_CC_C_O
+-
+ AH_TOP([#include "xorg-server.h"])
+ 
+ # Define a configure option for an alternate module directory
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0005-util-Consolidate-common-macros.patch b/source/x/x11/patch/xf86-video-chips/0005-util-Consolidate-common-macros.patch
new file mode 100644
index 00000000..77d0d5bc
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0005-util-Consolidate-common-macros.patch
@@ -0,0 +1,283 @@
+From 94a8b34528b42a4fe6f81c8b8bd1ddb6bebaeea9 Mon Sep 17 00:00:00 2001
+From: Jeremy Huddleston <jeremyhu@apple.com>
+Date: Tue, 18 Oct 2011 23:04:32 -0700
+Subject: [PATCH 5/9] util: Consolidate common macros
+
+Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
+---
+ util/dRegs.c    |   57 +------------------------------------------------------
+ util/iopl.h     |   54 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ util/mRegs.c    |   57 +------------------------------------------------------
+ util/modClock.c |   53 ++-------------------------------------------------
+ 4 files changed, 58 insertions(+), 163 deletions(-)
+ create mode 100644 util/iopl.h
+
+diff --git a/util/dRegs.c b/util/dRegs.c
+index b7edc8f..0d2f0cb 100644
+--- a/util/dRegs.c
++++ b/util/dRegs.c
+@@ -1,63 +1,8 @@
+-
+-
+-
+-
+-
+-
+-#ifdef __NetBSD__
+-#  include <sys/types.h>
+-#  include <machine/pio.h>
+-#  include <machine/sysarch.h>
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    include <sys/types.h>
+-#    ifdef NCR
+-       /* broken NCR <sys/sysi86.h> */
+-#      define __STDC
+-#      include <sys/sysi86.h>
+-#      undef __STDC
+-#    else
+-#      include <sys/sysi86.h>
+-#    endif
+-#    ifdef SVR4
+-#      if !defined(sun)
+-#        include <sys/seg.h>
+-#      endif
+-#    endif
+-#    include <sys/v86.h>
+-#    if defined(sun)
+-#      include <sys/psw.h>
+-#    endif
+-#  endif
+-#  include "AsmMacros.h"
+-#endif /* NetBSD */
+-
+ #include <unistd.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ 
+-#ifdef __NetBSD__
+-#  define SET_IOPL() i386_iopl(3)
+-#  define RESET_IOPL() i386_iopl(0)
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    ifndef SI86IOPL
+-#      define SET_IOPL() sysi86(SI86V86,V86SC_IOPL,PS_IOPL)
+-#      define RESET_IOPL() sysi86(SI86V86,V86SC_IOPL,0)
+-#    else
+-#      define SET_IOPL() sysi86(SI86IOPL,3)
+-#      define RESET_IOPL() sysi86(SI86IOPL,0)
+-#    endif
+-#  else
+-#    ifdef linux
+-#      define SET_IOPL() iopl(3)
+-#      define RESET_IOPL() iopl(0)
+-#    else
+-#      define SET_IOPL() (void)0
+-#      define RESET_IOPL() (void)0
+-#    endif
+-#  endif
+-#endif
++#include "iopl.h"
+ 
+ int main(void)
+ {
+diff --git a/util/iopl.h b/util/iopl.h
+new file mode 100644
+index 0000000..d7890b3
+--- /dev/null
++++ b/util/iopl.h
+@@ -0,0 +1,54 @@
++#ifdef __NetBSD__
++#  include <sys/types.h>
++#  include <machine/pio.h>
++#  include <machine/sysarch.h>
++#else
++#  if defined(SVR4) && defined(i386)
++#    include <sys/types.h>
++#    ifdef NCR
++       /* broken NCR <sys/sysi86.h> */
++#      define __STDC
++#      include <sys/sysi86.h>
++#      undef __STDC
++#    else
++#      include <sys/sysi86.h>
++#    endif
++#    ifdef SVR4
++#      if !defined(sun)
++#        include <sys/seg.h>
++#      endif
++#    endif
++#    include <sys/v86.h>
++#    if defined(sun)
++#      include <sys/psw.h>
++#    endif
++#  endif
++#  include "AsmMacros.h"
++#endif /* NetBSD */
++
++#include <unistd.h>
++#include <stdio.h>
++#include <stdlib.h>
++
++#ifdef __NetBSD__
++#  define SET_IOPL() i386_iopl(3)
++#  define RESET_IOPL() i386_iopl(0)
++#else
++#  if defined(SVR4) && defined(i386)
++#    ifndef SI86IOPL
++#      define SET_IOPL() sysi86(SI86V86,V86SC_IOPL,PS_IOPL)
++#      define RESET_IOPL() sysi86(SI86V86,V86SC_IOPL,0)
++#    else
++#      define SET_IOPL() sysi86(SI86IOPL,3)
++#      define RESET_IOPL() sysi86(SI86IOPL,0)
++#    endif
++#  else
++#    ifdef linux
++#      define SET_IOPL() iopl(3)
++#      define RESET_IOPL() iopl(0)
++#    else
++#      define SET_IOPL() (void)0
++#      define RESET_IOPL() (void)0
++#    endif
++#  endif
++#endif
+diff --git a/util/mRegs.c b/util/mRegs.c
+index f359738..843d01d 100644
+--- a/util/mRegs.c
++++ b/util/mRegs.c
+@@ -1,63 +1,8 @@
+-
+-
+-
+-
+-
+-
+-#ifdef __NetBSD__
+-#  include <sys/types.h>
+-#  include <machine/pio.h>
+-#  include <machine/sysarch.h>
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    include <sys/types.h>
+-#    ifdef NCR
+-       /* broken NCR <sys/sysi86.h> */
+-#      define __STDC
+-#      include <sys/sysi86.h>
+-#      undef __STDC
+-#    else
+-#      include <sys/sysi86.h>
+-#    endif
+-#    ifdef SVR4
+-#      if !defined(sun)
+-#        include <sys/seg.h>
+-#      endif
+-#    endif
+-#    include <sys/v86.h>
+-#    if defined(sun)
+-#      include <sys/psw.h>
+-#    endif
+-#  endif
+-#  include "AsmMacros.h"
+-#endif /* NetBSD */
+-
+ #include <unistd.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ 
+-#ifdef __NetBSD__
+-#  define SET_IOPL() i386_iopl(3)
+-#  define RESET_IOPL() i386_iopl(0)
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    ifndef SI86IOPL
+-#      define SET_IOPL() sysi86(SI86V86,V86SC_IOPL,PS_IOPL)
+-#      define RESET_IOPL() sysi86(SI86V86,V86SC_IOPL,0)
+-#    else
+-#      define SET_IOPL() sysi86(SI86IOPL,3)
+-#      define RESET_IOPL() sysi86(SI86IOPL,0)
+-#    endif
+-#  else
+-#    ifdef linux
+-#      define SET_IOPL() iopl(3)
+-#      define RESET_IOPL() iopl(0)
+-#    else
+-#      define SET_IOPL() (void)0
+-#      define RESET_IOPL() (void)0
+-#    endif
+-#  endif
+-#endif
++#include "iopl.h"
+ 
+ int hex2int(char* str);
+ 
+diff --git a/util/modClock.c b/util/modClock.c
+index 89a291a..45af19b 100644
+--- a/util/modClock.c
++++ b/util/modClock.c
+@@ -1,61 +1,12 @@
+-
+-#ifdef __NetBSD__
+-#  include <sys/types.h>
+-#  include <machine/pio.h>
+-#  include <machine/sysarch.h>
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    include <sys/types.h>
+-#    ifdef NCR
+-       /* broken NCR <sys/sysi86.h> */
+-#      define __STDC
+-#      include <sys/sysi86.h>
+-#      undef __STDC
+-#    else
+-#      include <sys/sysi86.h>
+-#    endif
+-#    ifdef SVR4
+-#      if !defined(sun)
+-#        include <sys/seg.h>
+-#      endif
+-#    endif
+-#    include <sys/v86.h>
+-#    if defined(sun)
+-#      include <sys/psw.h>
+-#    endif
+-#  endif
+-#  include "AsmMacros.h"
+-#endif /* NetBSD */
+-
+ #include <unistd.h>
+ #include <stdio.h>
+ #include <stdlib.h>
++
+ #ifndef Lynx
+ #include <fnmatch.h>
+ #endif
+ 
+-#ifdef __NetBSD__
+-#  define SET_IOPL() i386_iopl(3)
+-#  define RESET_IOPL() i386_iopl(0)
+-#else
+-#  if defined(SVR4) && defined(i386)
+-#    ifndef SI86IOPL
+-#      define SET_IOPL() sysi86(SI86V86,V86SC_IOPL,PS_IOPL)
+-#      define RESET_IOPL() sysi86(SI86V86,V86SC_IOPL,0)
+-#    else
+-#      define SET_IOPL() sysi86(SI86IOPL,3)
+-#      define RESET_IOPL() sysi86(SI86IOPL,0)
+-#    endif
+-#  else
+-#    ifdef linux
+-#      define SET_IOPL() iopl(3)
+-#      define RESET_IOPL() iopl(0)
+-#    else
+-#      define SET_IOPL() (void)0
+-#      define RESET_IOPL() (void)0
+-#    endif
+-#  endif
+-#endif
++#include "iopl.h"
+ 
+ #define tolerance 0.01 /* +/- 1% */
+ 
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0006-Fix-implicit-declaration-of-iopl.patch b/source/x/x11/patch/xf86-video-chips/0006-Fix-implicit-declaration-of-iopl.patch
new file mode 100644
index 00000000..a0b4bb4b
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0006-Fix-implicit-declaration-of-iopl.patch
@@ -0,0 +1,35 @@
+From c421f2477c99990d0dc712d6aece981fa6c961e5 Mon Sep 17 00:00:00 2001
+From: Jeremy Huddleston <jeremyhu@apple.com>
+Date: Tue, 18 Oct 2011 23:09:09 -0700
+Subject: [PATCH 6/9] Fix implicit declaration of iopl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+warning: implicit declaration of function ‘iopl’ [-Wimplicit-function-declaration]
+
+Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
+---
+ util/iopl.h |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/util/iopl.h b/util/iopl.h
+index d7890b3..e08207c 100644
+--- a/util/iopl.h
++++ b/util/iopl.h
+@@ -3,6 +3,12 @@
+ #  include <machine/pio.h>
+ #  include <machine/sysarch.h>
+ #else
++#  if defined(__linux__)
++/* Can't because <sys/iopl.h> provides conflicting inb, outb, etc
++ * #    include <sys/io.h>
++ */
++int iopl(int level);
++#  endif
+ #  if defined(SVR4) && defined(i386)
+ #    include <sys/types.h>
+ #    ifdef NCR
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0007-Build-fix-for-ABI-Version-12.patch b/source/x/x11/patch/xf86-video-chips/0007-Build-fix-for-ABI-Version-12.patch
new file mode 100644
index 00000000..12dc5131
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0007-Build-fix-for-ABI-Version-12.patch
@@ -0,0 +1,51 @@
+From 8a5ea07f30cc71ecc413fad0713facff72f77472 Mon Sep 17 00:00:00 2001
+From: Jeremy Huddleston <jeremyhu@apple.com>
+Date: Tue, 18 Oct 2011 23:21:33 -0700
+Subject: [PATCH 7/9] Build fix for ABI Version 12
+
+ABI Version 12 removes support for multiple PCI domains.  If you need to
+use this driver on a system with more than one PCI domain, you should
+either port this driver to using libpciaccess directly or stick with an
+older server.
+
+Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
+---
+ src/ct_driver.c |    5 +++++
+ src/ct_driver.h |    4 ++--
+ 2 files changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/src/ct_driver.c b/src/ct_driver.c
+index e6538c6..a2e5c94 100644
+--- a/src/ct_driver.c
++++ b/src/ct_driver.c
+@@ -1446,7 +1446,12 @@ chipsPreInitHiQV(ScrnInfoPtr pScrn, int flags)
+ 
+     hwp = VGAHWPTR(pScrn);
+     vgaHWGetIOBase(hwp);
++#if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 12
+     cPtr->PIOBase = hwp->PIOOffset;
++#else
++    cPtr->PIOBase = 0;
++#endif
++
+     /*
+      * Must allow ensure that storage for the 2nd set of vga registers is
+      * allocated for dual channel cards
+diff --git a/src/ct_driver.h b/src/ct_driver.h
+index 39eeb6e..9033867 100644
+--- a/src/ct_driver.h
++++ b/src/ct_driver.h
+@@ -276,8 +276,8 @@ typedef struct _CHIPSRec {
+ #endif
+     int			Chipset;
+     EntityInfoPtr       pEnt;
+-    IOADDRESS		PIOBase;
+-    CARD32		IOAddress;
++    unsigned long	PIOBase;
++    unsigned long	IOAddress;
+     unsigned long	FbAddress;
+     unsigned int	IOBase;
+     unsigned char *	FbBase;
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0008-Fall-back-to-shadowfb-if-XAA-is-unavailable.patch b/source/x/x11/patch/xf86-video-chips/0008-Fall-back-to-shadowfb-if-XAA-is-unavailable.patch
new file mode 100644
index 00000000..3478fa34
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0008-Fall-back-to-shadowfb-if-XAA-is-unavailable.patch
@@ -0,0 +1,31 @@
+From 5d5753551609f1483801e5edd8d42b11713c981e Mon Sep 17 00:00:00 2001
+From: Adam Jackson <ajax@redhat.com>
+Date: Mon, 19 Dec 2011 16:18:34 -0500
+Subject: [PATCH 8/9] Fall back to shadowfb if XAA is unavailable
+
+Signed-off-by: Adam Jackson <ajax@redhat.com>
+---
+ src/ct_driver.c |    7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/src/ct_driver.c b/src/ct_driver.c
+index a2e5c94..95092a2 100644
+--- a/src/ct_driver.c
++++ b/src/ct_driver.c
+@@ -1345,10 +1345,9 @@ CHIPSPreInit(ScrnInfoPtr pScrn, int flags)
+     
+     if (cPtr->Flags & ChipsAccelSupport) {
+ 	if (!xf86LoadSubModule(pScrn, "xaa")) {
+-	    vbeFree(cPtr->pVbe);
+-	    cPtr->pVbe = NULL;
+-	    CHIPSFreeRec(pScrn);
+-	    return FALSE;
++	    xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Falling back to shadowfb\n");
++	    cPtr->Flags &= ~(ChipsAccelSupport);
++	    cPtr->Flags |= ChipsShadowFB;
+ 	}
+     }
+ 
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xf86-video-chips/0009-Fix-for-new-vgaHW-ABI.patch b/source/x/x11/patch/xf86-video-chips/0009-Fix-for-new-vgaHW-ABI.patch
new file mode 100644
index 00000000..74ec3722
--- /dev/null
+++ b/source/x/x11/patch/xf86-video-chips/0009-Fix-for-new-vgaHW-ABI.patch
@@ -0,0 +1,25 @@
+From 989cf4f1fb2ac57f38d363734b71a5cf749db146 Mon Sep 17 00:00:00 2001
+From: Adam Jackson <ajax@redhat.com>
+Date: Mon, 19 Dec 2011 17:45:41 -0500
+Subject: [PATCH 9/9] Fix for new vgaHW ABI
+
+Signed-off-by: Adam Jackson <ajax@redhat.com>
+---
+ src/ct_driver.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/ct_driver.c b/src/ct_driver.c
+index 95092a2..08ccd72 100644
+--- a/src/ct_driver.c
++++ b/src/ct_driver.c
+@@ -1444,6 +1444,7 @@ chipsPreInitHiQV(ScrnInfoPtr pScrn, int flags)
+         return FALSE;
+ 
+     hwp = VGAHWPTR(pScrn);
++    vgaHWSetStdFuncs(hwp);
+     vgaHWGetIOBase(hwp);
+ #if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 12
+     cPtr->PIOBase = hwp->PIOOffset;
+-- 
+1.7.9.4
+
diff --git a/source/x/x11/patch/xorg-server.patch b/source/x/x11/patch/xorg-server.patch
index e3218a03..01be43a3 100644
--- a/source/x/x11/patch/xorg-server.patch
+++ b/source/x/x11/patch/xorg-server.patch
@@ -1,3 +1 @@
 zcat $CWD/patch/xorg-server/x11.startwithblackscreen.diff.gz | patch -p1 --verbose || { touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
-zcat $CWD/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff.gz | patch -p1 --verbose || { touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
-zcat $CWD/patch/xorg-server/xorg-server.try_nouveau.diff.gz | patch -p1 --verbose || { touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed ; continue ; }
diff --git a/source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff b/source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff
index bfa9c305..8c0e3b54 100644
--- a/source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff
+++ b/source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff
@@ -1,13 +1,14 @@
---- ./dix/window.c.orig	2007-01-22 23:39:15.000000000 -0600
-+++ ./dix/window.c	2007-02-14 03:21:03.000000000 -0600
-@@ -140,8 +140,8 @@
-  *
-  ******/
+diff -Nur xorg-server-1.12.1.orig/dix/window.c xorg-server-1.12.1/dix/window.c
+--- xorg-server-1.12.1.orig/dix/window.c	2012-03-29 21:57:25.000000000 -0500
++++ xorg-server-1.12.1/dix/window.c	2012-04-13 22:01:24.456073603 -0500
+@@ -145,8 +145,8 @@
  
--static unsigned char _back_lsb[4] = {0x88, 0x22, 0x44, 0x11};
--static unsigned char _back_msb[4] = {0x11, 0x44, 0x22, 0x88};
-+static unsigned char _back_lsb[4] = {0x00, 0x00, 0x00, 0x00};
-+static unsigned char _back_msb[4] = {0x00, 0x00, 0x00, 0x00};
+ Bool bgNoneRoot = FALSE;
  
- _X_EXPORT int screenIsSaved = SCREEN_SAVER_OFF;
+-static unsigned char _back_lsb[4] = { 0x88, 0x22, 0x44, 0x11 };
+-static unsigned char _back_msb[4] = { 0x11, 0x44, 0x22, 0x88 };
++static unsigned char _back_lsb[4] = { 0x00, 0x00, 0x00, 0x00 };
++static unsigned char _back_msb[4] = { 0x00, 0x00, 0x00, 0x00 };
  
+ static Bool WindowParentHasDeviceCursor(WindowPtr pWin,
+                                         DeviceIntPtr pDev, CursorPtr pCurs);
diff --git a/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff b/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff
deleted file mode 100644
index f8abdccb..00000000
--- a/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./fb/fbpict.c.orig	2010-03-11 22:38:21.000000000 -0600
-+++ ./fb/fbpict.c	2010-04-29 14:14:52.000000000 -0500
-@@ -37,7 +37,7 @@
- #include "mipict.h"
- #include "fbpict.h"
- 
--#define mod(a,b) ((b) == 1 ? 0 : (a) >= 0 ? (a) % (b) : (b) - (-a) % (b))
-+#define mod(a,b) ((b) == 1 ? 0 : (a) >= 0 ? (a) % (b) : (b) - (-(a)) % (b))
- 
- void
- fbWalkCompositeRegion (CARD8 op,
diff --git a/source/x/x11/patch/xorg-server/xorg-server.try_nouveau.diff b/source/x/x11/patch/xorg-server/xorg-server.try_nouveau.diff
deleted file mode 100644
index 74f799a1..00000000
--- a/source/x/x11/patch/xorg-server/xorg-server.try_nouveau.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./hw/xfree86/common/xf86pciBus.c.orig	2010-07-01 12:17:35.000000000 -0500
-+++ ./hw/xfree86/common/xf86pciBus.c	2010-11-18 16:56:57.633003654 -0600
-@@ -1118,7 +1118,7 @@
- 	    break;
- 	case 0x102b:		    driverList[0] = "mga";	break;
- 	case 0x10c8:		    driverList[0] = "neomagic"; break;
--	case 0x10de: case 0x12d2:   driverList[0] = "nv";	break;
-+	case 0x10de: case 0x12d2:   driverList[0] = "nouveau" ; driverList[1] = "nv";	break;
- 	case 0x1106:		    driverList[0] = "openchrome"; break;
-         case 0x1b36:		    driverList[0] = "qxl"; break;
- 	case 0x1163:		    driverList[0] = "rendition"; break;
diff --git a/source/x/x11/post-install/lbxproxy.post-install b/source/x/x11/post-install/lbxproxy.post-install
deleted file mode 100644
index 9bb11032..00000000
--- a/source/x/x11/post-install/lbxproxy.post-install
+++ /dev/null
@@ -1,5 +0,0 @@
-mkdir -p $PKG/etc/X11
-( cd $PKG/usr/lib/X11
-  mv lbxproxy $PKG/etc/X11
-  ln -sf ../../../etc/X11/lbxproxy .
-)
diff --git a/source/x/x11/post-install/libXaw3d.post-install b/source/x/x11/post-install/libXaw3d.post-install
new file mode 100644
index 00000000..5b2d5bf2
--- /dev/null
+++ b/source/x/x11/post-install/libXaw3d.post-install
@@ -0,0 +1,29 @@
+
+# Copyright 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Create some compat symlinks for older versions:
+
+( cd $PKG/usr/lib
+  ln -sf libXaw3d.so.8 libXaw3d.so.6
+  ln -sf libXaw3d.so.8 libXaw3d.so.7
+)
+
diff --git a/source/x/x11/post-install/proxymngr.post-install b/source/x/x11/post-install/proxymngr.post-install
deleted file mode 100644
index 29c647c3..00000000
--- a/source/x/x11/post-install/proxymngr.post-install
+++ /dev/null
@@ -1,5 +0,0 @@
-mkdir -p $PKG/etc/X11
-( cd $PKG/usr/lib/X11
-  mv proxymngr $PKG/etc/X11
-  ln -sf ../../../etc/X11/proxymngr .
-)
diff --git a/source/x/x11/post-install/rstart.post-install b/source/x/x11/post-install/rstart.post-install
deleted file mode 100644
index d51ad34d..00000000
--- a/source/x/x11/post-install/rstart.post-install
+++ /dev/null
@@ -1,5 +0,0 @@
-mkdir -p $PKG/etc/X11
-( cd $PKG/usr/lib/X11
-  mv rstart $PKG/etc/X11
-  ln -sf ../../../etc/X11/rstart .
-)
diff --git a/source/x/x11/post-install/util-macros.post-install b/source/x/x11/post-install/util-macros.post-install
deleted file mode 100644
index b25fb344..00000000
--- a/source/x/x11/post-install/util-macros.post-install
+++ /dev/null
@@ -1,2 +0,0 @@
-mkdir -p $PKG/usr/lib
-mv $PKG/usr/share/pkgconfig $PKG/usr/lib
diff --git a/source/x/x11/post-install/xcb-util.post-install b/source/x/x11/post-install/xcb-util.post-install
new file mode 100644
index 00000000..ac269177
--- /dev/null
+++ b/source/x/x11/post-install/xcb-util.post-install
@@ -0,0 +1,8 @@
+# The libraries libxcb-{atom,aux,event} have been merged into the
+# libxcb-util library.  To maintain compatibility with existing
+# binaries, add some runtime-only compat symlinks:
+( cd $PKG/usr/lib
+  ln -sf libxcb-util.so.?.?.? libxcb-atom.so.1
+  ln -sf libxcb-util.so.?.?.? libxcb-aux.so.0
+  ln -sf libxcb-util.so.?.?.? libxcb-event.so.1
+)
diff --git a/source/x/x11/post-install/xdm.post-install b/source/x/x11/post-install/xdm.post-install
index 83dcf788..73611b47 100644
--- a/source/x/x11/post-install/xdm.post-install
+++ b/source/x/x11/post-install/xdm.post-install
@@ -1,19 +1,30 @@
 mkdir -p $PKG/etc/X11
-( cd $PKG/usr/lib/X11
-  mv xdm $PKG/etc/X11
-  ln -sf ../../../etc/X11/xdm .
-)
-mv $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsession.orig
-mv $PKG/etc/X11/xdm/Xsetup_0 $PKG/etc/X11/xdm/Xsetup_0.orig
+mv $PKG/usr/lib/X11/xdm $PKG/etc/X11
+ln -sf ../../../etc/X11/xdm $PKG/usr/lib/X11/xdm
+
+#( cd $PKG/usr/lib/X11
+#  mv xdm $PKG/etc/X11
+#  ln -sf ../../../etc/X11/xdm .
+#)
+
+mkdir -p $PKG/usr/doc/xdm-$MODULAR_PACKAGE_VERSION
+mv $PKG/etc/X11/xdm/Xsession $PKG/usr/doc/xdm-$MODULAR_PACKAGE_VERSION/Xsession.orig
+mv $PKG/etc/X11/xdm/Xsetup_0 $PKG/usr/doc/xdm-$MODULAR_PACKAGE_VERSION/Xsetup_0.orig
+
 cp -a $CWD/post-install/xdm/Xsession $PKG/etc/X11/xdm/Xsession
 cp -a $CWD/post-install/xdm/Xsetup_0 $PKG/etc/X11/xdm/Xsetup_0
+
 chown root:root $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsetup_0
-chmod 755 $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsetup_0
-( cd $PKG/etc/X11/xdm
-  mv xdm-config xdm-config.new
-  mv Xservers Xservers.new
-  mv Xsession Xsession.new
-)
+chmod 0755 $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsetup_0
+
+for conffile in \
+  Xaccess Xreset Xresources Xservers Xsession Xsetup_0 Xstartup Xwilling \
+  GiveConsole TakeConsole chooser xdm-config ../app-defaults/Chooser ; 
+do
+  mv $PKG/etc/X11/xdm/${conffile} $PKG/etc/X11/xdm/${conffile}.new ;
+done
+
 mkdir -p $PKG/var/lib/xdm
 chown root:root $PKG/var/lib/xdm
 chmod 755 $PKG/var/lib/xdm
+
diff --git a/source/x/x11/post-install/xf86-input-wacom.post-install b/source/x/x11/post-install/xf86-input-wacom.post-install
new file mode 100644
index 00000000..d2b17ecc
--- /dev/null
+++ b/source/x/x11/post-install/xf86-input-wacom.post-install
@@ -0,0 +1,5 @@
+# I'm not sure we need this any more, so let's wait for a bug report
+# https://wiki.archlinux.org/index.php/Wacom_Tablet
+mkdir -p $PKG/lib/udev/rules.d
+cat $CWD/post-install/xf86-input-wacom/60-wacom.rules > \
+   $PKG/lib/udev/rules.d/60-wacom.rules
diff --git a/source/x/x11/post-install/xf86-input-wacom/60-wacom.rules b/source/x/x11/post-install/xf86-input-wacom/60-wacom.rules
new file mode 100644
index 00000000..59224786
--- /dev/null
+++ b/source/x/x11/post-install/xf86-input-wacom/60-wacom.rules
@@ -0,0 +1,6 @@
+# From https://wiki.archlinux.org/index.php/Wacom_Tablet
+ACTION!="add|change", GOTO="wacom_end"
+   # Match all wacom tablets with a serial ID starting with WACf or FUJ*
+   ATTRS{id}=="WACf*" ENV{NAME}="Serial Wacom Tablet", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1"
+   ATTRS{id}=="FUJ*" ENV{NAME}="Serial Wacom Tablet", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1"
+LABEL="wacom_end"
diff --git a/source/x/x11/slack-desc/applewmproto b/source/x/x11/slack-desc/applewmproto
deleted file mode 100644
index 4a81b79b..00000000
--- a/source/x/x11/slack-desc/applewmproto
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-applewmproto: applewmproto
-applewmproto:
-applewmproto: applewmproto is part of X11.
-applewmproto:
-applewmproto: For more information about the X.Org Foundation (the providers of the
-applewmproto: X.Org implementation of the X Window System), see their website:
-applewmproto:
-applewmproto: http://www.x.org
-applewmproto:
-applewmproto:
-applewmproto:
diff --git a/source/x/x11/slack-desc/appres b/source/x/x11/slack-desc/appres
index e397c8cd..001a3f34 100644
--- a/source/x/x11/slack-desc/appres
+++ b/source/x/x11/slack-desc/appres
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-appres: appres
+appres: appres (X resource inspection utility)
 appres:
-appres: appres is part of X11.
+appres: The appres program prints the resources seen by an application
+appres: (or subhierarchy of an application) with the specified class and
+appres: instance names.  It can be used to determine which resources a
+appres: particular program will load.
 appres:
-appres: For more information about the X.Org Foundation (the providers of the
-appres: X.Org implementation of the X Window System), see their website:
 appres:
-appres: http://www.x.org
 appres:
 appres:
 appres:
diff --git a/source/x/x11/slack-desc/bdftopcf b/source/x/x11/slack-desc/bdftopcf
index cb2a80a1..c9514c16 100644
--- a/source/x/x11/slack-desc/bdftopcf
+++ b/source/x/x11/slack-desc/bdftopcf
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-bdftopcf: bdftopcf
+bdftopcf: bdftopcf (font compiler for the X server and font server)
 bdftopcf:
-bdftopcf: bdftopcf is part of X11.
+bdftopcf: Fonts in Portable Compiled Format can be read by any architecture,
+bdftopcf: although the file is structured to allow one particular architecture
+bdftopcf: to read them directly without reformatting.  This allows fast reading
+bdftopcf: on the appropriate machine, but the files are still portable (but
+bdftopcf: read more slowly) on other machines.
 bdftopcf:
-bdftopcf: For more information about the X.Org Foundation (the providers of the
-bdftopcf: X.Org implementation of the X Window System), see their website:
-bdftopcf:
-bdftopcf: http://www.x.org
 bdftopcf:
 bdftopcf:
 bdftopcf:
diff --git a/source/x/x11/slack-desc/beforelight b/source/x/x11/slack-desc/beforelight
index 20549ac4..a2a5f48e 100644
--- a/source/x/x11/slack-desc/beforelight
+++ b/source/x/x11/slack-desc/beforelight
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-beforelight: beforelight
+beforelight: beforelight (X11 screensaver)
 beforelight:
-beforelight: beforelight is part of X11.
+beforelight: The beforelight program is a sample implementation of a screen saver
+beforelight: for X servers supporting the MIT-SCREEN-SAVER extension.   It is only
+beforelight: recommended for use as a code sample, as it does not include features
+beforelight: such as screen locking or configurability, and relies on the legacy
+beforelight: Xaw toolkit.
 beforelight:
-beforelight: For more information about the X.Org Foundation (the providers of the
-beforelight: X.Org implementation of the X Window System), see their website:
-beforelight:
-beforelight: http://www.x.org
 beforelight:
 beforelight:
 beforelight:
diff --git a/source/x/x11/slack-desc/bigreqsproto b/source/x/x11/slack-desc/bigreqsproto
index 55c66bbc..8b35e52f 100644
--- a/source/x/x11/slack-desc/bigreqsproto
+++ b/source/x/x11/slack-desc/bigreqsproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
             |-----handy-ruler------------------------------------------------------|
-bigreqsproto: bigreqsproto
+bigreqsproto: bigreqsproto (C prototypes for X11 Big Requests Extension)
 bigreqsproto:
 bigreqsproto: bigreqsproto is part of X11.
 bigreqsproto:
diff --git a/source/x/x11/slack-desc/bitmap b/source/x/x11/slack-desc/bitmap
index 72423e76..60ed7c74 100644
--- a/source/x/x11/slack-desc/bitmap
+++ b/source/x/x11/slack-desc/bitmap
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-bitmap: bitmap
+bitmap: bitmap (X bitmap (XBM) editor and converter utilities)
+bitmap:
+bitmap: The bitmap package includes the bitmap, bmtoa, and atobm programs.
+bitmap:
+bitmap:
 bitmap:
-bitmap: bitmap is part of X11.
 bitmap:
-bitmap: For more information about the X.Org Foundation (the providers of the
-bitmap: X.Org implementation of the X Window System), see their website:
 bitmap:
-bitmap: http://www.x.org
 bitmap:
 bitmap:
 bitmap:
diff --git a/source/x/x11/slack-desc/compiz b/source/x/x11/slack-desc/compiz
index e1399119..c81aae0e 100644
--- a/source/x/x11/slack-desc/compiz
+++ b/source/x/x11/slack-desc/compiz
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-compiz: compiz
+compiz: compiz (OpenGL window and compositing manager)
 compiz:
-compiz: compiz is part of X11.
+compiz: Compiz is an OpenGL compositing manager that use
+compiz: GLX_EXT_texture_from_pixmap for binding redirected top-level windows
+compiz: to texture objects. It has a flexible plug-in system and it is designed
+compiz: to run well on most graphics hardware.
 compiz:
-compiz: For more information about the X.Org Foundation (the providers of the
-compiz: X.Org implementation of the X Window System), see their website:
 compiz:
-compiz: http://www.x.org
 compiz:
 compiz:
 compiz:
diff --git a/source/x/x11/slack-desc/compositeproto b/source/x/x11/slack-desc/compositeproto
index 63e26c77..197ece99 100644
--- a/source/x/x11/slack-desc/compositeproto
+++ b/source/x/x11/slack-desc/compositeproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-compositeproto: compositeproto
+compositeproto: compositeproto (C prototypes for X11 Composite Extension)
 compositeproto:
 compositeproto: compositeproto is part of X11.
 compositeproto:
diff --git a/source/x/x11/slack-desc/constype b/source/x/x11/slack-desc/constype
deleted file mode 100644
index ddcf95df..00000000
--- a/source/x/x11/slack-desc/constype
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-constype: constype
-constype:
-constype: constype is part of X11.
-constype:
-constype: For more information about the X.Org Foundation (the providers of the
-constype: X.Org implementation of the X Window System), see their website:
-constype:
-constype: http://www.x.org
-constype:
-constype:
-constype:
diff --git a/source/x/x11/slack-desc/damageproto b/source/x/x11/slack-desc/damageproto
index 98c085fe..5998b60a 100644
--- a/source/x/x11/slack-desc/damageproto
+++ b/source/x/x11/slack-desc/damageproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-damageproto: damageproto
+damageproto: damageproto (C prototypes for X11 Damage Extension)
 damageproto:
 damageproto: damageproto is part of X11.
 damageproto:
diff --git a/source/x/x11/slack-desc/dmxproto b/source/x/x11/slack-desc/dmxproto
index a9598f9a..7df2c84f 100644
--- a/source/x/x11/slack-desc/dmxproto
+++ b/source/x/x11/slack-desc/dmxproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-dmxproto: dmxproto
+dmxproto: dmxproto (C prototypes for X11 Distributed Multihead X Extension)
 dmxproto:
 dmxproto: dmxproto is part of X11.
 dmxproto:
diff --git a/source/x/x11/slack-desc/dri2proto b/source/x/x11/slack-desc/dri2proto
index c416449a..06ac495d 100644
--- a/source/x/x11/slack-desc/dri2proto
+++ b/source/x/x11/slack-desc/dri2proto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-dri2proto: dri2proto
+dri2proto: dri2proto (C prototypes for X11 Direct Rendering Infrastructure 2)
 dri2proto:
 dri2proto: dri2proto is part of X11.
 dri2proto:
diff --git a/source/x/x11/slack-desc/editres b/source/x/x11/slack-desc/editres
index efdc8d75..01fe56c8 100644
--- a/source/x/x11/slack-desc/editres
+++ b/source/x/x11/slack-desc/editres
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-editres: editres
+editres: editres (X11 resource editor)
 editres:
 editres: editres is part of X11.
 editres:
diff --git a/source/x/x11/slack-desc/encodings b/source/x/x11/slack-desc/encodings
index a6de3517..9d35da9f 100644
--- a/source/x/x11/slack-desc/encodings
+++ b/source/x/x11/slack-desc/encodings
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-encodings: encodings
+encodings: encodings (X11 font encodings)
 encodings:
 encodings: encodings is part of X11.
 encodings:
diff --git a/source/x/x11/slack-desc/evieext b/source/x/x11/slack-desc/evieext
index 36a135e6..cff1b67d 100644
--- a/source/x/x11/slack-desc/evieext
+++ b/source/x/x11/slack-desc/evieext
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-evieext: evieext
+evieext: evieext (C prototypes for X11 Extended Visual Information Extension)
 evieext:
 evieext: evieext is part of X11.
 evieext:
diff --git a/source/x/x11/slack-desc/fixesproto b/source/x/x11/slack-desc/fixesproto
index 7e1a1eab..83cfded0 100644
--- a/source/x/x11/slack-desc/fixesproto
+++ b/source/x/x11/slack-desc/fixesproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-fixesproto: fixesproto
+fixesproto: fixesproto (C prototypes for X11 X Fixes Extension)
 fixesproto:
 fixesproto: fixesproto is part of X11.
 fixesproto:
diff --git a/source/x/x11/slack-desc/font-adobe-100dpi b/source/x/x11/slack-desc/font-adobe-100dpi
index 50996b1b..ea59df87 100644
--- a/source/x/x11/slack-desc/font-adobe-100dpi
+++ b/source/x/x11/slack-desc/font-adobe-100dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-font-adobe-100dpi: font-adobe-100dpi
+font-adobe-100dpi: font-adobe-100dpi (bitmap fonts for X11)
 font-adobe-100dpi:
 font-adobe-100dpi: font-adobe-100dpi is part of X11.
 font-adobe-100dpi:
diff --git a/source/x/x11/slack-desc/font-adobe-75dpi b/source/x/x11/slack-desc/font-adobe-75dpi
index ca91ae5e..fac2cc42 100644
--- a/source/x/x11/slack-desc/font-adobe-75dpi
+++ b/source/x/x11/slack-desc/font-adobe-75dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-font-adobe-75dpi: font-adobe-75dpi
+font-adobe-75dpi: font-adobe-75dpi (bitmap fonts for X11)
 font-adobe-75dpi:
 font-adobe-75dpi: font-adobe-75dpi is part of X11.
 font-adobe-75dpi:
diff --git a/source/x/x11/slack-desc/font-adobe-utopia-100dpi b/source/x/x11/slack-desc/font-adobe-utopia-100dpi
index 956f6d53..29cebe23 100644
--- a/source/x/x11/slack-desc/font-adobe-utopia-100dpi
+++ b/source/x/x11/slack-desc/font-adobe-utopia-100dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                         |-----handy-ruler------------------------------------------------------|
-font-adobe-utopia-100dpi: font-adobe-utopia-100dpi
+font-adobe-utopia-100dpi: font-adobe-utopia-100dpi (bitmap fonts for X11)
 font-adobe-utopia-100dpi:
 font-adobe-utopia-100dpi: font-adobe-utopia-100dpi is part of X11.
 font-adobe-utopia-100dpi:
diff --git a/source/x/x11/slack-desc/font-adobe-utopia-75dpi b/source/x/x11/slack-desc/font-adobe-utopia-75dpi
index 73571791..1c941b8a 100644
--- a/source/x/x11/slack-desc/font-adobe-utopia-75dpi
+++ b/source/x/x11/slack-desc/font-adobe-utopia-75dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                        |-----handy-ruler------------------------------------------------------|
-font-adobe-utopia-75dpi: font-adobe-utopia-75dpi
+font-adobe-utopia-75dpi: font-adobe-utopia-75dpi (bitmap fonts for X11)
 font-adobe-utopia-75dpi:
 font-adobe-utopia-75dpi: font-adobe-utopia-75dpi is part of X11.
 font-adobe-utopia-75dpi:
diff --git a/source/x/x11/slack-desc/font-adobe-utopia-type1 b/source/x/x11/slack-desc/font-adobe-utopia-type1
index 5f6d7d1b..7c6141c4 100644
--- a/source/x/x11/slack-desc/font-adobe-utopia-type1
+++ b/source/x/x11/slack-desc/font-adobe-utopia-type1
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                        |-----handy-ruler------------------------------------------------------|
-font-adobe-utopia-type1: font-adobe-utopia-type1
+font-adobe-utopia-type1: font-adobe-utopia-type1 (scalable fonts for X11)
 font-adobe-utopia-type1:
 font-adobe-utopia-type1: font-adobe-utopia-type1 is part of X11.
 font-adobe-utopia-type1:
diff --git a/source/x/x11/slack-desc/font-alias b/source/x/x11/slack-desc/font-alias
index d5e513d5..8f34e389 100644
--- a/source/x/x11/slack-desc/font-alias
+++ b/source/x/x11/slack-desc/font-alias
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-font-alias: font-alias
+font-alias: font-alias (X11 font aliases)
 font-alias:
 font-alias: font-alias is part of X11.
 font-alias:
diff --git a/source/x/x11/slack-desc/font-arabic-misc b/source/x/x11/slack-desc/font-arabic-misc
index bf9d34e2..8f2d661b 100644
--- a/source/x/x11/slack-desc/font-arabic-misc
+++ b/source/x/x11/slack-desc/font-arabic-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-font-arabic-misc: font-arabic-misc
+font-arabic-misc: font-arabic-misc (bitmap fonts for X11)
 font-arabic-misc:
 font-arabic-misc: font-arabic-misc is part of X11.
 font-arabic-misc:
diff --git a/source/x/x11/slack-desc/font-bh-100dpi b/source/x/x11/slack-desc/font-bh-100dpi
index 3db086b4..2ec64078 100644
--- a/source/x/x11/slack-desc/font-bh-100dpi
+++ b/source/x/x11/slack-desc/font-bh-100dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-bh-100dpi: font-bh-100dpi
+font-bh-100dpi: font-bh-100dpi (bitmap fonts for X11)
 font-bh-100dpi:
 font-bh-100dpi: font-bh-100dpi is part of X11.
 font-bh-100dpi:
diff --git a/source/x/x11/slack-desc/font-bh-75dpi b/source/x/x11/slack-desc/font-bh-75dpi
index ab93f8a9..36f1efd3 100644
--- a/source/x/x11/slack-desc/font-bh-75dpi
+++ b/source/x/x11/slack-desc/font-bh-75dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-font-bh-75dpi: font-bh-75dpi
+font-bh-75dpi: font-bh-75dpi (bitmap fonts for X11)
 font-bh-75dpi:
 font-bh-75dpi: font-bh-75dpi is part of X11.
 font-bh-75dpi:
diff --git a/source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi b/source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi
index d289f9a2..30805c87 100644
--- a/source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi
+++ b/source/x/x11/slack-desc/font-bh-lucidatypewriter-100dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                                |-----handy-ruler------------------------------------------------------|
-font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi
+font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi (bitmap fonts for X11)
 font-bh-lucidatypewriter-100dpi:
 font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi is part of X11.
 font-bh-lucidatypewriter-100dpi:
diff --git a/source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi b/source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi
index a9ae87e3..23c5b8e4 100644
--- a/source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi
+++ b/source/x/x11/slack-desc/font-bh-lucidatypewriter-75dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                               |-----handy-ruler------------------------------------------------------|
-font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi
+font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi (bitmap fonts for X11)
 font-bh-lucidatypewriter-75dpi:
 font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi is part of X11.
 font-bh-lucidatypewriter-75dpi:
diff --git a/source/x/x11/slack-desc/font-bh-ttf b/source/x/x11/slack-desc/font-bh-ttf
index 5965002d..2d695562 100644
--- a/source/x/x11/slack-desc/font-bh-ttf
+++ b/source/x/x11/slack-desc/font-bh-ttf
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-font-bh-ttf: font-bh-ttf
+font-bh-ttf: font-bh-ttf (scalable fonts for X11)
 font-bh-ttf:
 font-bh-ttf: font-bh-ttf is part of X11.
 font-bh-ttf:
diff --git a/source/x/x11/slack-desc/font-bh-type1 b/source/x/x11/slack-desc/font-bh-type1
index eb61ed80..7d988cd3 100644
--- a/source/x/x11/slack-desc/font-bh-type1
+++ b/source/x/x11/slack-desc/font-bh-type1
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-font-bh-type1: font-bh-type1
+font-bh-type1: font-bh-type1 (scalable fonts for X11)
 font-bh-type1:
 font-bh-type1: font-bh-type1 is part of X11.
 font-bh-type1:
diff --git a/source/x/x11/slack-desc/font-bitstream-100dpi b/source/x/x11/slack-desc/font-bitstream-100dpi
index 3ebccefc..d2461bb0 100644
--- a/source/x/x11/slack-desc/font-bitstream-100dpi
+++ b/source/x/x11/slack-desc/font-bitstream-100dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                      |-----handy-ruler------------------------------------------------------|
-font-bitstream-100dpi: font-bitstream-100dpi
+font-bitstream-100dpi: font-bitstream-100dpi (bitmap fonts for X11)
 font-bitstream-100dpi:
 font-bitstream-100dpi: font-bitstream-100dpi is part of X11.
 font-bitstream-100dpi:
diff --git a/source/x/x11/slack-desc/font-bitstream-75dpi b/source/x/x11/slack-desc/font-bitstream-75dpi
index 49b1f262..8604be9f 100644
--- a/source/x/x11/slack-desc/font-bitstream-75dpi
+++ b/source/x/x11/slack-desc/font-bitstream-75dpi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-font-bitstream-75dpi: font-bitstream-75dpi
+font-bitstream-75dpi: font-bitstream-75dpi (bitmap fonts for X11)
 font-bitstream-75dpi:
 font-bitstream-75dpi: font-bitstream-75dpi is part of X11.
 font-bitstream-75dpi:
diff --git a/source/x/x11/slack-desc/font-bitstream-speedo b/source/x/x11/slack-desc/font-bitstream-speedo
index f5db39e8..51236f96 100644
--- a/source/x/x11/slack-desc/font-bitstream-speedo
+++ b/source/x/x11/slack-desc/font-bitstream-speedo
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                      |-----handy-ruler------------------------------------------------------|
-font-bitstream-speedo: font-bitstream-speedo
+font-bitstream-speedo: font-bitstream-speedo (scalable fonts for X11)
 font-bitstream-speedo:
 font-bitstream-speedo: font-bitstream-speedo is part of X11.
 font-bitstream-speedo:
diff --git a/source/x/x11/slack-desc/font-bitstream-type1 b/source/x/x11/slack-desc/font-bitstream-type1
index c2c8c89c..ce26f50a 100644
--- a/source/x/x11/slack-desc/font-bitstream-type1
+++ b/source/x/x11/slack-desc/font-bitstream-type1
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-font-bitstream-type1: font-bitstream-type1
+font-bitstream-type1: font-bitstream-type1 (scalable fonts for X11)
 font-bitstream-type1:
 font-bitstream-type1: font-bitstream-type1 is part of X11.
 font-bitstream-type1:
diff --git a/source/x/x11/slack-desc/font-cronyx-cyrillic b/source/x/x11/slack-desc/font-cronyx-cyrillic
index 1d8aa0cd..5e5dd4f8 100644
--- a/source/x/x11/slack-desc/font-cronyx-cyrillic
+++ b/source/x/x11/slack-desc/font-cronyx-cyrillic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-font-cronyx-cyrillic: font-cronyx-cyrillic
+font-cronyx-cyrillic: font-cronyx-cyrillic (bitmap fonts for X11)
 font-cronyx-cyrillic:
 font-cronyx-cyrillic: font-cronyx-cyrillic is part of X11.
 font-cronyx-cyrillic:
diff --git a/source/x/x11/slack-desc/font-cursor-misc b/source/x/x11/slack-desc/font-cursor-misc
index 846a7ee5..99b22e06 100644
--- a/source/x/x11/slack-desc/font-cursor-misc
+++ b/source/x/x11/slack-desc/font-cursor-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-font-cursor-misc: font-cursor-misc
+font-cursor-misc: font-cursor-misc (bitmap fonts for X11)
 font-cursor-misc:
 font-cursor-misc: font-cursor-misc is part of X11.
 font-cursor-misc:
diff --git a/source/x/x11/slack-desc/font-daewoo-misc b/source/x/x11/slack-desc/font-daewoo-misc
index ea2a14fe..82cedda0 100644
--- a/source/x/x11/slack-desc/font-daewoo-misc
+++ b/source/x/x11/slack-desc/font-daewoo-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-font-daewoo-misc: font-daewoo-misc
+font-daewoo-misc: font-daewoo-misc (bitmap fonts for X11)
 font-daewoo-misc:
 font-daewoo-misc: font-daewoo-misc is part of X11.
 font-daewoo-misc:
diff --git a/source/x/x11/slack-desc/font-dec-misc b/source/x/x11/slack-desc/font-dec-misc
index 9f1f8457..be0b1bea 100644
--- a/source/x/x11/slack-desc/font-dec-misc
+++ b/source/x/x11/slack-desc/font-dec-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-font-dec-misc: font-dec-misc
+font-dec-misc: font-dec-misc (bitmap fonts for X11)
 font-dec-misc:
 font-dec-misc: font-dec-misc is part of X11.
 font-dec-misc:
diff --git a/source/x/x11/slack-desc/font-ibm-type1 b/source/x/x11/slack-desc/font-ibm-type1
index 773d7c57..44388e4e 100644
--- a/source/x/x11/slack-desc/font-ibm-type1
+++ b/source/x/x11/slack-desc/font-ibm-type1
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-ibm-type1: font-ibm-type1
+font-ibm-type1: font-ibm-type1 (scalable fonts for X11)
 font-ibm-type1:
 font-ibm-type1: font-ibm-type1 is part of X11.
 font-ibm-type1:
diff --git a/source/x/x11/slack-desc/font-isas-misc b/source/x/x11/slack-desc/font-isas-misc
index 2be2ce73..437bb423 100644
--- a/source/x/x11/slack-desc/font-isas-misc
+++ b/source/x/x11/slack-desc/font-isas-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-isas-misc: font-isas-misc
+font-isas-misc: font-isas-misc (bitmap fonts for X11)
 font-isas-misc:
 font-isas-misc: font-isas-misc is part of X11.
 font-isas-misc:
diff --git a/source/x/x11/slack-desc/font-jis-misc b/source/x/x11/slack-desc/font-jis-misc
index bbdf362e..6541bbcd 100644
--- a/source/x/x11/slack-desc/font-jis-misc
+++ b/source/x/x11/slack-desc/font-jis-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-font-jis-misc: font-jis-misc
+font-jis-misc: font-jis-misc (bitmap fonts for X11)
 font-jis-misc:
 font-jis-misc: font-jis-misc is part of X11.
 font-jis-misc:
diff --git a/source/x/x11/slack-desc/font-micro-misc b/source/x/x11/slack-desc/font-micro-misc
index f26eae31..aa2a3895 100644
--- a/source/x/x11/slack-desc/font-micro-misc
+++ b/source/x/x11/slack-desc/font-micro-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-font-micro-misc: font-micro-misc
+font-micro-misc: font-micro-misc (bitmap fonts for X11)
 font-micro-misc:
 font-micro-misc: font-micro-misc is part of X11.
 font-micro-misc:
diff --git a/source/x/x11/slack-desc/font-misc-cyrillic b/source/x/x11/slack-desc/font-misc-cyrillic
index 4e443cba..8317cb63 100644
--- a/source/x/x11/slack-desc/font-misc-cyrillic
+++ b/source/x/x11/slack-desc/font-misc-cyrillic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-font-misc-cyrillic: font-misc-cyrillic
+font-misc-cyrillic: font-misc-cyrillic (bitmap fonts for X11)
 font-misc-cyrillic:
 font-misc-cyrillic: font-misc-cyrillic is part of X11.
 font-misc-cyrillic:
diff --git a/source/x/x11/slack-desc/font-misc-ethiopic b/source/x/x11/slack-desc/font-misc-ethiopic
index edaa2278..16f735a2 100644
--- a/source/x/x11/slack-desc/font-misc-ethiopic
+++ b/source/x/x11/slack-desc/font-misc-ethiopic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-font-misc-ethiopic: font-misc-ethiopic
+font-misc-ethiopic: font-misc-ethiopic (bitmap fonts for X11)
 font-misc-ethiopic:
 font-misc-ethiopic: font-misc-ethiopic is part of X11.
 font-misc-ethiopic:
diff --git a/source/x/x11/slack-desc/font-misc-meltho b/source/x/x11/slack-desc/font-misc-meltho
index a30da3d0..7af6d1ba 100644
--- a/source/x/x11/slack-desc/font-misc-meltho
+++ b/source/x/x11/slack-desc/font-misc-meltho
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-font-misc-meltho: font-misc-meltho
+font-misc-meltho: font-misc-meltho (bitmap fonts for X11)
 font-misc-meltho:
 font-misc-meltho: font-misc-meltho is part of X11.
 font-misc-meltho:
diff --git a/source/x/x11/slack-desc/font-misc-misc b/source/x/x11/slack-desc/font-misc-misc
index 99c7d8ae..bdf59a80 100644
--- a/source/x/x11/slack-desc/font-misc-misc
+++ b/source/x/x11/slack-desc/font-misc-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-misc-misc: font-misc-misc
+font-misc-misc: font-misc-misc (bitmap fonts for X11)
 font-misc-misc:
 font-misc-misc: font-misc-misc is part of X11.
 font-misc-misc:
diff --git a/source/x/x11/slack-desc/font-mutt-misc b/source/x/x11/slack-desc/font-mutt-misc
index f1f7a248..c273a72b 100644
--- a/source/x/x11/slack-desc/font-mutt-misc
+++ b/source/x/x11/slack-desc/font-mutt-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-mutt-misc: font-mutt-misc
+font-mutt-misc: font-mutt-misc (bitmap fonts for X11)
 font-mutt-misc:
 font-mutt-misc: font-mutt-misc is part of X11.
 font-mutt-misc:
diff --git a/source/x/x11/slack-desc/font-schumacher-misc b/source/x/x11/slack-desc/font-schumacher-misc
index 4d7c58b0..55546ea4 100644
--- a/source/x/x11/slack-desc/font-schumacher-misc
+++ b/source/x/x11/slack-desc/font-schumacher-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-font-schumacher-misc: font-schumacher-misc
+font-schumacher-misc: font-schumacher-misc (bitmap fonts for X11)
 font-schumacher-misc:
 font-schumacher-misc: font-schumacher-misc is part of X11.
 font-schumacher-misc:
diff --git a/source/x/x11/slack-desc/font-screen-cyrillic b/source/x/x11/slack-desc/font-screen-cyrillic
index 9d65d38d..b60e6da4 100644
--- a/source/x/x11/slack-desc/font-screen-cyrillic
+++ b/source/x/x11/slack-desc/font-screen-cyrillic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-font-screen-cyrillic: font-screen-cyrillic
+font-screen-cyrillic: font-screen-cyrillic (bitmap fonts for X11)
 font-screen-cyrillic:
 font-screen-cyrillic: font-screen-cyrillic is part of X11.
 font-screen-cyrillic:
diff --git a/source/x/x11/slack-desc/font-sony-misc b/source/x/x11/slack-desc/font-sony-misc
index 8fc8b85e..8a539888 100644
--- a/source/x/x11/slack-desc/font-sony-misc
+++ b/source/x/x11/slack-desc/font-sony-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-font-sony-misc: font-sony-misc
+font-sony-misc: font-sony-misc (bitmap fonts for X11)
 font-sony-misc:
 font-sony-misc: font-sony-misc is part of X11.
 font-sony-misc:
diff --git a/source/x/x11/slack-desc/font-sun-misc b/source/x/x11/slack-desc/font-sun-misc
index d2fd1a33..d941087d 100644
--- a/source/x/x11/slack-desc/font-sun-misc
+++ b/source/x/x11/slack-desc/font-sun-misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-font-sun-misc: font-sun-misc
+font-sun-misc: font-sun-misc (bitmap fonts for X11)
 font-sun-misc:
 font-sun-misc: font-sun-misc is part of X11.
 font-sun-misc:
diff --git a/source/x/x11/slack-desc/font-util b/source/x/x11/slack-desc/font-util
index 4c6a2b2a..05e2f054 100644
--- a/source/x/x11/slack-desc/font-util
+++ b/source/x/x11/slack-desc/font-util
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-font-util: font-util
+font-util: font-util (X.Org font package creation/installation utilities)
 font-util:
 font-util: font-util is part of X11.
 font-util:
diff --git a/source/x/x11/slack-desc/font-winitzki-cyrillic b/source/x/x11/slack-desc/font-winitzki-cyrillic
index c278dfff..573c09fd 100644
--- a/source/x/x11/slack-desc/font-winitzki-cyrillic
+++ b/source/x/x11/slack-desc/font-winitzki-cyrillic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                       |-----handy-ruler------------------------------------------------------|
-font-winitzki-cyrillic: font-winitzki-cyrillic
+font-winitzki-cyrillic: font-winitzki-cyrillic (bitmap fonts for X11)
 font-winitzki-cyrillic:
 font-winitzki-cyrillic: font-winitzki-cyrillic is part of X11.
 font-winitzki-cyrillic:
diff --git a/source/x/x11/slack-desc/font-xfree86-type1 b/source/x/x11/slack-desc/font-xfree86-type1
index 57ab76c6..1e70a7d4 100644
--- a/source/x/x11/slack-desc/font-xfree86-type1
+++ b/source/x/x11/slack-desc/font-xfree86-type1
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-font-xfree86-type1: font-xfree86-type1
+font-xfree86-type1: font-xfree86-type1 (scalable fonts for X11)
 font-xfree86-type1:
 font-xfree86-type1: font-xfree86-type1 is part of X11.
 font-xfree86-type1:
diff --git a/source/x/x11/slack-desc/fontcacheproto b/source/x/x11/slack-desc/fontcacheproto
index 8388f4c3..eaec530c 100644
--- a/source/x/x11/slack-desc/fontcacheproto
+++ b/source/x/x11/slack-desc/fontcacheproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-fontcacheproto: fontcacheproto
+fontcacheproto: fontcacheproto (C prototypes for X11 Font Cache Extension)
 fontcacheproto:
 fontcacheproto: fontcacheproto is part of X11.
 fontcacheproto:
diff --git a/source/x/x11/slack-desc/fontsproto b/source/x/x11/slack-desc/fontsproto
index 7f5c20a2..a46da298 100644
--- a/source/x/x11/slack-desc/fontsproto
+++ b/source/x/x11/slack-desc/fontsproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-fontsproto: fontsproto
+fontsproto: fontsproto (C prototypes for X11 X Fonts Extension)
 fontsproto:
 fontsproto: fontsproto is part of X11.
 fontsproto:
diff --git a/source/x/x11/slack-desc/fonttosfnt b/source/x/x11/slack-desc/fonttosfnt
index 158fe2e3..1f809734 100644
--- a/source/x/x11/slack-desc/fonttosfnt
+++ b/source/x/x11/slack-desc/fonttosfnt
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-fonttosfnt: fonttosfnt
+fonttosfnt: fonttosfnt (utility to wrap a bitmap font in a sfnt wrapper)
 fonttosfnt:
 fonttosfnt: fonttosfnt is part of X11.
 fonttosfnt:
diff --git a/source/x/x11/slack-desc/fslsfonts b/source/x/x11/slack-desc/fslsfonts
index ca4c416f..53957d1a 100644
--- a/source/x/x11/slack-desc/fslsfonts
+++ b/source/x/x11/slack-desc/fslsfonts
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-fslsfonts: fslsfonts
+fslsfonts: fslsfonts (produces a list of fonts served by an X font server)
 fslsfonts:
 fslsfonts: fslsfonts is part of X11.
 fslsfonts:
diff --git a/source/x/x11/slack-desc/fstobdf b/source/x/x11/slack-desc/fstobdf
index ada9e2ac..4a28eb7b 100644
--- a/source/x/x11/slack-desc/fstobdf
+++ b/source/x/x11/slack-desc/fstobdf
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-fstobdf: fstobdf
+fstobdf: fstobdf (copy fonts from an X11 font server)
 fstobdf:
-fstobdf: fstobdf is part of X11.
+fstobdf: The fstobdf program reads a font from a font server and prints a BDF
+fstobdf: file on the standard output that may be used to recreate the font.
+fstobdf: This is useful in testing servers, debugging font metrics, and
+fstobdf: reproducing lost BDF files.
 fstobdf:
-fstobdf: For more information about the X.Org Foundation (the providers of the
-fstobdf: X.Org implementation of the X Window System), see their website:
 fstobdf:
-fstobdf: http://www.x.org
 fstobdf:
 fstobdf:
 fstobdf:
diff --git a/source/x/x11/slack-desc/gccmakedep b/source/x/x11/slack-desc/gccmakedep
index 1220112e..21db55cd 100644
--- a/source/x/x11/slack-desc/gccmakedep
+++ b/source/x/x11/slack-desc/gccmakedep
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-gccmakedep: gccmakedep
+gccmakedep: gccmakedep (create dependencies in makefiles)
 gccmakedep:
 gccmakedep: gccmakedep is part of X11.
 gccmakedep:
diff --git a/source/x/x11/slack-desc/glproto b/source/x/x11/slack-desc/glproto
index 2c2ddb6f..6d0b506a 100644
--- a/source/x/x11/slack-desc/glproto
+++ b/source/x/x11/slack-desc/glproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-glproto: glproto
+glproto: glproto (C prototypes for X11 OpenGL Extension)
 glproto:
 glproto: glproto is part of X11.
 glproto:
diff --git a/source/x/x11/slack-desc/iceauth b/source/x/x11/slack-desc/iceauth
index 17b0197f..54f525d6 100644
--- a/source/x/x11/slack-desc/iceauth
+++ b/source/x/x11/slack-desc/iceauth
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-iceauth: iceauth
+iceauth: iceauth (display/edit ICE authorization information)
+iceauth:
+iceauth: The iceauth program is used to edit and display the authorization
+iceauth: information used in connecting with ICE.  It operates very much like
+iceauth: the xauth program for X11 connection authentication records.
 iceauth:
-iceauth: iceauth is part of X11.
 iceauth:
-iceauth: For more information about the X.Org Foundation (the providers of the
-iceauth: X.Org implementation of the X Window System), see their website:
 iceauth:
-iceauth: http://www.x.org
 iceauth:
 iceauth:
 iceauth:
diff --git a/source/x/x11/slack-desc/ico b/source/x/x11/slack-desc/ico
index 025dd68c..b4aeb4a5 100644
--- a/source/x/x11/slack-desc/ico
+++ b/source/x/x11/slack-desc/ico
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-ico: ico
+ico: ico (X11 test client)
 ico:
-ico: ico is part of X11.
+ico: ico is a simple animation program that may be used for testing various
+ico: X11 operations and extensions.  It displays a wire-frame rotating
+ico: polyhedron, with hidden lines removed, or a solid-fill polyhedron
+ico: with hidden faces removed.
 ico:
-ico: For more information about the X.Org Foundation (the providers of the
-ico: X.Org implementation of the X Window System), see their website:
 ico:
-ico: http://www.x.org
 ico:
 ico:
 ico:
diff --git a/source/x/x11/slack-desc/imake b/source/x/x11/slack-desc/imake
index 8b1d5631..53599ebf 100644
--- a/source/x/x11/slack-desc/imake
+++ b/source/x/x11/slack-desc/imake
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-imake: imake
+imake: imake (C preprocessor interface to the make utility)
+imake:
+imake: The imake package contains the imake utility, plus the following
+imake: support programs: ccmakedep, mergelib, revpath, mkdirhier, makeg,
+imake: cleanlinks, mkhtmlindex, xmkmf
 imake:
-imake: imake is part of X11.
 imake:
-imake: For more information about the X.Org Foundation (the providers of the
-imake: X.Org implementation of the X Window System), see their website:
 imake:
-imake: http://www.x.org
 imake:
 imake:
 imake:
diff --git a/source/x/x11/slack-desc/inputproto b/source/x/x11/slack-desc/inputproto
index 6b9a3302..d5e58679 100644
--- a/source/x/x11/slack-desc/inputproto
+++ b/source/x/x11/slack-desc/inputproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-inputproto: inputproto
+inputproto: inputproto (C prototypes for X Input extension)
 inputproto:
 inputproto: inputproto is part of X11.
 inputproto:
diff --git a/source/x/x11/slack-desc/intel-gpu-tools b/source/x/x11/slack-desc/intel-gpu-tools
index b9cdf7c1..3fcee9a3 100644
--- a/source/x/x11/slack-desc/intel-gpu-tools
+++ b/source/x/x11/slack-desc/intel-gpu-tools
@@ -7,13 +7,13 @@
 
                |-----handy-ruler------------------------------------------------------|
 intel-gpu-tools: intel-gpu-tools (Intel DRM Driver Testing Tools)
-intel-gpu-tools: 
-intel-gpu-tools: This is a collection of tools for development and testing of the Intel
-intel-gpu-tools: DRM driver.  There are many macro-level test suites including xtest,
-intel-gpu-tools: rendercheck, piglit, and oglconform.
-intel-gpu-tools: 
-intel-gpu-tools: 
-intel-gpu-tools: 
-intel-gpu-tools: 
-intel-gpu-tools: 
-intel-gpu-tools: 
+intel-gpu-tools:
+intel-gpu-tools: This is a collection of tools for development and testing of the
+intel-gpu-tools: Intel DRM driver.  There are many macro-level test suites including
+intel-gpu-tools: xtest, rendercheck, piglit, and oglconform.
+intel-gpu-tools:
+intel-gpu-tools:
+intel-gpu-tools:
+intel-gpu-tools:
+intel-gpu-tools:
+intel-gpu-tools:
diff --git a/source/x/x11/slack-desc/kbproto b/source/x/x11/slack-desc/kbproto
index c9703ab3..822d8cfd 100644
--- a/source/x/x11/slack-desc/kbproto
+++ b/source/x/x11/slack-desc/kbproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-kbproto: kbproto
+kbproto: kbproto (C prototypes for X11 X Keyboard Extension)
 kbproto:
 kbproto: kbproto is part of X11.
 kbproto:
diff --git a/source/x/x11/slack-desc/lbxproxy b/source/x/x11/slack-desc/lbxproxy
deleted file mode 100644
index 578f938f..00000000
--- a/source/x/x11/slack-desc/lbxproxy
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-lbxproxy: lbxproxy
-lbxproxy:
-lbxproxy: lbxproxy is part of X11.
-lbxproxy:
-lbxproxy: For more information about the X.Org Foundation (the providers of the
-lbxproxy: X.Org implementation of the X Window System), see their website:
-lbxproxy:
-lbxproxy: http://www.x.org
-lbxproxy:
-lbxproxy:
-lbxproxy:
diff --git a/source/x/x11/slack-desc/libAppleWM b/source/x/x11/slack-desc/libAppleWM
deleted file mode 100644
index d5562510..00000000
--- a/source/x/x11/slack-desc/libAppleWM
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-          |-----handy-ruler------------------------------------------------------|
-libAppleWM: libAppleWM
-libAppleWM:
-libAppleWM: libAppleWM is part of X11.
-libAppleWM:
-libAppleWM: For more information about the X.Org Foundation (the providers of the
-libAppleWM: X.Org implementation of the X Window System), see their website:
-libAppleWM:
-libAppleWM: http://www.x.org
-libAppleWM:
-libAppleWM:
-libAppleWM:
diff --git a/source/x/x11/slack-desc/libFS b/source/x/x11/slack-desc/libFS
index 6fe37f3e..6554f511 100644
--- a/source/x/x11/slack-desc/libFS
+++ b/source/x/x11/slack-desc/libFS
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libFS: libFS
+libFS: libFS (X Font Service client library)
 libFS:
 libFS: libFS is part of X11.
 libFS:
diff --git a/source/x/x11/slack-desc/libICE b/source/x/x11/slack-desc/libICE
index 78a4761c..47b74926 100644
--- a/source/x/x11/slack-desc/libICE
+++ b/source/x/x11/slack-desc/libICE
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libICE: libICE
+libICE: libICE (X Inter-Client Exchange Library)
 libICE:
 libICE: libICE is part of X11.
 libICE:
diff --git a/source/x/x11/slack-desc/libSM b/source/x/x11/slack-desc/libSM
index 06803b32..19292900 100644
--- a/source/x/x11/slack-desc/libSM
+++ b/source/x/x11/slack-desc/libSM
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libSM: libSM
+libSM: libSM (X Session Management Library)
 libSM:
 libSM: libSM is part of X11.
 libSM:
diff --git a/source/x/x11/slack-desc/libWindowsWM b/source/x/x11/slack-desc/libWindowsWM
deleted file mode 100644
index 162e44be..00000000
--- a/source/x/x11/slack-desc/libWindowsWM
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-libWindowsWM: libWindowsWM
-libWindowsWM:
-libWindowsWM: libWindowsWM is part of X11.
-libWindowsWM:
-libWindowsWM: For more information about the X.Org Foundation (the providers of the
-libWindowsWM: X.Org implementation of the X Window System), see their website:
-libWindowsWM:
-libWindowsWM: http://www.x.org
-libWindowsWM:
-libWindowsWM:
-libWindowsWM:
diff --git a/source/x/x11/slack-desc/libX11 b/source/x/x11/slack-desc/libX11
index e7f01273..2ec4f39a 100644
--- a/source/x/x11/slack-desc/libX11
+++ b/source/x/x11/slack-desc/libX11
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libX11: libX11
+libX11: libX11 (Core X11 protocol client library)
 libX11:
 libX11: libX11 is part of X11.
 libX11:
diff --git a/source/x/x11/slack-desc/libXScrnSaver b/source/x/x11/slack-desc/libXScrnSaver
index dea8d864..ae6eea7c 100644
--- a/source/x/x11/slack-desc/libXScrnSaver
+++ b/source/x/x11/slack-desc/libXScrnSaver
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-libXScrnSaver: libXScrnSaver
+libXScrnSaver: libXScrnSaver (X11 Screen Saver extension client library)
 libXScrnSaver:
 libXScrnSaver: libXScrnSaver is part of X11.
 libXScrnSaver:
diff --git a/source/x/x11/slack-desc/libXTrap b/source/x/x11/slack-desc/libXTrap
deleted file mode 100644
index 51443def..00000000
--- a/source/x/x11/slack-desc/libXTrap
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-libXTrap: libXTrap
-libXTrap:
-libXTrap: libXTrap is part of X11.
-libXTrap:
-libXTrap: For more information about the X.Org Foundation (the providers of the
-libXTrap: X.Org implementation of the X Window System), see their website:
-libXTrap:
-libXTrap: http://www.x.org
-libXTrap:
-libXTrap:
-libXTrap:
diff --git a/source/x/x11/slack-desc/libXau b/source/x/x11/slack-desc/libXau
index f2b09201..6e565d76 100644
--- a/source/x/x11/slack-desc/libXau
+++ b/source/x/x11/slack-desc/libXau
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libXau: libXau
+libXau: libXau (Sample Authorization Protocol for X)
 libXau:
-libXau: libXau is part of X11.
+libXau: This is a very simple mechanism for providing individual access to 
+libXau: an X Window System display.It uses existing core protocol and library 
+libXau: hooks for specifying authorization data in the connection setup block 
+libXau: to restrict use of the display to only those clients that show that 
+libXau: they know a server-specific key called a "magic cookie."
 libXau:
-libXau: For more information about the X.Org Foundation (the providers of the
-libXau: X.Org implementation of the X Window System), see their website:
-libXau:
-libXau: http://www.x.org
 libXau:
 libXau:
 libXau:
diff --git a/source/x/x11/slack-desc/libXaw b/source/x/x11/slack-desc/libXaw
index 3174674b..727adeac 100644
--- a/source/x/x11/slack-desc/libXaw
+++ b/source/x/x11/slack-desc/libXaw
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libXaw: libXaw
+libXaw: libXaw (client library for the X Athena Widget Set)
+libXaw:
+libXaw: Xaw is a widget set based on the X Toolkit Intrinsics (Xt) Library.
+libXaw:
+libXaw:
 libXaw:
-libXaw: libXaw is part of X11.
 libXaw:
-libXaw: For more information about the X.Org Foundation (the providers of the
-libXaw: X.Org implementation of the X Window System), see their website:
 libXaw:
-libXaw: http://www.x.org
 libXaw:
 libXaw:
 libXaw:
diff --git a/source/x/x11/slack-desc/libXaw3d b/source/x/x11/slack-desc/libXaw3d
new file mode 100644
index 00000000..48f7ddc3
--- /dev/null
+++ b/source/x/x11/slack-desc/libXaw3d
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+libXaw3d: libXaw3d (3D enhanced version of the MIT Athena widget set)
+libXaw3d:
+libXaw3d: Xaw3d is an enhanced version of the MIT Athena Widget set for
+libXaw3d: the X Window System.  Xaw3d adds a three-dimensional look to
+libXaw3d: applications with minimal or no source code changes.
+libXaw3d:
+libXaw3d: You should install Xaw3d if you are using applications which 
+libXaw3d: incorporate the MIT Athena widget set and you'd like to 
+libXaw3d: incorporate a 3D look into those applications.
+libXaw3d:
+libXaw3d:
diff --git a/source/x/x11/slack-desc/libXcm b/source/x/x11/slack-desc/libXcm
new file mode 100644
index 00000000..0516aaf7
--- /dev/null
+++ b/source/x/x11/slack-desc/libXcm
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+libXcm: libXcm (reference implementation of the net-color specification)
+libXcm:
+libXcm: The libXcm library is a reference implementation of the net-color 
+libXcm: spec.  It allows to attach color regions to X windows to communicate 
+libXcm: with color servers.
+libXcm:
+libXcm:
+libXcm:
+libXcm:
+libXcm:
+libXcm:
diff --git a/source/x/x11/slack-desc/libXcomposite b/source/x/x11/slack-desc/libXcomposite
index 2fcbe069..cf43dc4f 100644
--- a/source/x/x11/slack-desc/libXcomposite
+++ b/source/x/x11/slack-desc/libXcomposite
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-libXcomposite: libXcomposite
+libXcomposite: libXcomposite (client library for the X Composite extension)
 libXcomposite:
 libXcomposite: libXcomposite is part of X11.
 libXcomposite:
diff --git a/source/x/x11/slack-desc/libXcursor b/source/x/x11/slack-desc/libXcursor
index 1e911648..2906c6aa 100644
--- a/source/x/x11/slack-desc/libXcursor
+++ b/source/x/x11/slack-desc/libXcursor
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libXcursor: libXcursor
+libXcursor: libXcursor (X Window System Cursor management library)
 libXcursor:
 libXcursor: libXcursor is part of X11.
 libXcursor:
diff --git a/source/x/x11/slack-desc/libXdamage b/source/x/x11/slack-desc/libXdamage
index 58f917df..05c618bf 100644
--- a/source/x/x11/slack-desc/libXdamage
+++ b/source/x/x11/slack-desc/libXdamage
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libXdamage: libXdamage
+libXdamage: libXdamage (client library for the X Damage Extension)
 libXdamage:
 libXdamage: libXdamage is part of X11.
 libXdamage:
diff --git a/source/x/x11/slack-desc/libXdmcp b/source/x/x11/slack-desc/libXdmcp
index fc03f5bb..f3dc2396 100644
--- a/source/x/x11/slack-desc/libXdmcp
+++ b/source/x/x11/slack-desc/libXdmcp
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-libXdmcp: libXdmcp
+libXdmcp: libXdmcp (X Display Manager Control Protocol library)
 libXdmcp:
 libXdmcp: libXdmcp is part of X11.
 libXdmcp:
diff --git a/source/x/x11/slack-desc/libXevie b/source/x/x11/slack-desc/libXevie
index c9701592..2af8d875 100644
--- a/source/x/x11/slack-desc/libXevie
+++ b/source/x/x11/slack-desc/libXevie
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-libXevie: libXevie
+libXevie: libXevie (X Event Interception Extension (XEvIE) library)
 libXevie:
 libXevie: libXevie is part of X11.
 libXevie:
diff --git a/source/x/x11/slack-desc/libXext b/source/x/x11/slack-desc/libXext
index cb5b395b..a636363a 100644
--- a/source/x/x11/slack-desc/libXext
+++ b/source/x/x11/slack-desc/libXext
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-libXext: libXext
+libXext: libXext (library for common extensions to the X11 protocol)
 libXext:
 libXext: libXext is part of X11.
 libXext:
diff --git a/source/x/x11/slack-desc/libXfixes b/source/x/x11/slack-desc/libXfixes
index 9b6b9df7..3c44fa46 100644
--- a/source/x/x11/slack-desc/libXfixes
+++ b/source/x/x11/slack-desc/libXfixes
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-libXfixes: libXfixes
+libXfixes: libXfixes (client library for the Xfixes extension)
 libXfixes:
 libXfixes: libXfixes is part of X11.
 libXfixes:
diff --git a/source/x/x11/slack-desc/libXfont b/source/x/x11/slack-desc/libXfont
index 109b391c..d78d6a0e 100644
--- a/source/x/x11/slack-desc/libXfont
+++ b/source/x/x11/slack-desc/libXfont
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-libXfont: libXfont
+libXfont: libXfont (library for legacy X11 font system)
 libXfont:
-libXfont: libXfont is part of X11.
-libXfont:
-libXfont: For more information about the X.Org Foundation (the providers of the
-libXfont: X.Org implementation of the X Window System), see their website:
-libXfont:
-libXfont: http://www.x.org
+libXfont: libXfont provides the core of the legacy X11 font system, handling the
+libXfont: index files (fonts.dir, fonts.alias, fonts.scale), the various font
+libXfont: file formats, and rasterizing them.   It is used by the X servers, the
+libXfont: X Font Server (xfs), and some font utilities (bdftopcf for instance),
+libXfont: but should not be used by normal X11 clients.  X11 clients access fonts
+libXfont: via either the new API's in libXft, or the legacy API's in libX11.
 libXfont:
 libXfont:
 libXfont:
diff --git a/source/x/x11/slack-desc/libXfontcache b/source/x/x11/slack-desc/libXfontcache
index 735bdaa7..fdf8ca36 100644
--- a/source/x/x11/slack-desc/libXfontcache
+++ b/source/x/x11/slack-desc/libXfontcache
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-libXfontcache: libXfontcache
+libXfontcache: libXfontcache (X-TrueType font cache extension client library)
 libXfontcache:
 libXfontcache: libXfontcache is part of X11.
 libXfontcache:
diff --git a/source/x/x11/slack-desc/libXft b/source/x/x11/slack-desc/libXft
index a87a87d4..856e2828 100644
--- a/source/x/x11/slack-desc/libXft
+++ b/source/x/x11/slack-desc/libXft
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libXft: libXft
+libXft: libXft (X FreeType library)
 libXft:
 libXft: libXft is part of X11.
 libXft:
diff --git a/source/x/x11/slack-desc/libXi b/source/x/x11/slack-desc/libXi
index f3f0c633..4585f82e 100644
--- a/source/x/x11/slack-desc/libXi
+++ b/source/x/x11/slack-desc/libXi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libXi: libXi
+libXi: libXi (library for the X Input Extension)
 libXi:
 libXi: libXi is part of X11.
 libXi:
diff --git a/source/x/x11/slack-desc/libXinerama b/source/x/x11/slack-desc/libXinerama
index e01ab025..3b16b81f 100644
--- a/source/x/x11/slack-desc/libXinerama
+++ b/source/x/x11/slack-desc/libXinerama
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-libXinerama: libXinerama
+libXinerama: libXinerama (library for Xinerama extension to X11 Protocol)
 libXinerama:
 libXinerama: libXinerama is part of X11.
 libXinerama:
diff --git a/source/x/x11/slack-desc/libXmu b/source/x/x11/slack-desc/libXmu
index dd6aff00..de36044c 100644
--- a/source/x/x11/slack-desc/libXmu
+++ b/source/x/x11/slack-desc/libXmu
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libXmu: libXmu
+libXmu: libXmu (X miscellaneous utility library)
 libXmu:
-libXmu: libXmu is part of X11.
+libXmu: This library contains miscellaneous utilities and is not part of the
+libXmu: Xlib standard.  It contains routines which only use public interfaces
+libXmu: so that it may be layered on top of any proprietary implementation
+libXmu: of Xlib or Xt.
 libXmu:
-libXmu: For more information about the X.Org Foundation (the providers of the
-libXmu: X.Org implementation of the X Window System), see their website:
 libXmu:
-libXmu: http://www.x.org
 libXmu:
 libXmu:
 libXmu:
diff --git a/source/x/x11/slack-desc/libXp b/source/x/x11/slack-desc/libXp
index 16eb84a1..b68a6664 100644
--- a/source/x/x11/slack-desc/libXp
+++ b/source/x/x11/slack-desc/libXp
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libXp: libXp
+libXp: libXp (X Print Client Library)
 libXp:
 libXp: libXp is part of X11.
 libXp:
diff --git a/source/x/x11/slack-desc/libXpm b/source/x/x11/slack-desc/libXpm
index 82d04380..77c809a5 100644
--- a/source/x/x11/slack-desc/libXpm
+++ b/source/x/x11/slack-desc/libXpm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libXpm: libXpm
+libXpm: libXpm (X Pixmap (XPM) image file format library)
 libXpm:
 libXpm: libXpm is part of X11.
 libXpm:
diff --git a/source/x/x11/slack-desc/libXprintAppUtil b/source/x/x11/slack-desc/libXprintAppUtil
deleted file mode 100644
index 4ef7b3ed..00000000
--- a/source/x/x11/slack-desc/libXprintAppUtil
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-libXprintAppUtil: libXprintAppUtil
-libXprintAppUtil:
-libXprintAppUtil: libXprintAppUtil is part of X11.
-libXprintAppUtil:
-libXprintAppUtil: For more information about the X.Org Foundation (the providers of the
-libXprintAppUtil: X.Org implementation of the X Window System), see their website:
-libXprintAppUtil:
-libXprintAppUtil: http://www.x.org
-libXprintAppUtil:
-libXprintAppUtil:
-libXprintAppUtil:
diff --git a/source/x/x11/slack-desc/libXprintUtil b/source/x/x11/slack-desc/libXprintUtil
deleted file mode 100644
index bcad3415..00000000
--- a/source/x/x11/slack-desc/libXprintUtil
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------------|
-libXprintUtil: libXprintUtil
-libXprintUtil:
-libXprintUtil: libXprintUtil is part of X11.
-libXprintUtil:
-libXprintUtil: For more information about the X.Org Foundation (the providers of the
-libXprintUtil: X.Org implementation of the X Window System), see their website:
-libXprintUtil:
-libXprintUtil: http://www.x.org
-libXprintUtil:
-libXprintUtil:
-libXprintUtil:
diff --git a/source/x/x11/slack-desc/libXrandr b/source/x/x11/slack-desc/libXrandr
index c86d49ab..ad2e243b 100644
--- a/source/x/x11/slack-desc/libXrandr
+++ b/source/x/x11/slack-desc/libXrandr
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-libXrandr: libXrandr
+libXrandr: libXrandr (X Resize, Rotate and Reflection extension library)
 libXrandr:
 libXrandr: libXrandr is part of X11.
 libXrandr:
diff --git a/source/x/x11/slack-desc/libXrender b/source/x/x11/slack-desc/libXrender
index fe9f3b54..c5fe7269 100644
--- a/source/x/x11/slack-desc/libXrender
+++ b/source/x/x11/slack-desc/libXrender
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libXrender: libXrender
+libXrender: libXrender (library for the Render Extension to the X11 protocol)
 libXrender:
 libXrender: libXrender is part of X11.
 libXrender:
diff --git a/source/x/x11/slack-desc/libXres b/source/x/x11/slack-desc/libXres
index 783719f2..4582cd5f 100644
--- a/source/x/x11/slack-desc/libXres
+++ b/source/x/x11/slack-desc/libXres
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-libXres: libXres
+libXres: libXres (X-Resource extension client library)
 libXres:
 libXres: libXres is part of X11.
 libXres:
diff --git a/source/x/x11/slack-desc/libXt b/source/x/x11/slack-desc/libXt
index 9a03bd98..3b8df4b0 100644
--- a/source/x/x11/slack-desc/libXt
+++ b/source/x/x11/slack-desc/libXt
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libXt: libXt
+libXt: libXt (X Toolkit Intrinsics library)
 libXt:
 libXt: libXt is part of X11.
 libXt:
diff --git a/source/x/x11/slack-desc/libXtst b/source/x/x11/slack-desc/libXtst
index f71c8475..63b93c01 100644
--- a/source/x/x11/slack-desc/libXtst
+++ b/source/x/x11/slack-desc/libXtst
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-libXtst: libXtst
+libXtst: libXtst (client library for the XTEST & RECORD extensions)
 libXtst:
 libXtst: libXtst is part of X11.
 libXtst:
diff --git a/source/x/x11/slack-desc/libXv b/source/x/x11/slack-desc/libXv
index 3bfe0299..d72865bf 100644
--- a/source/x/x11/slack-desc/libXv
+++ b/source/x/x11/slack-desc/libXv
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-libXv: libXv
+libXv: libXv (library for the X Video (Xv) extension to the X Window System)
 libXv:
 libXv: libXv is part of X11.
 libXv:
diff --git a/source/x/x11/slack-desc/libXvMC b/source/x/x11/slack-desc/libXvMC
index 5557fdb8..aecd7f3a 100644
--- a/source/x/x11/slack-desc/libXvMC
+++ b/source/x/x11/slack-desc/libXvMC
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-libXvMC: libXvMC
+libXvMC: libXvMC (X.Org X11 libXvMC runtime library)
 libXvMC:
 libXvMC: libXvMC is part of X11.
 libXvMC:
diff --git a/source/x/x11/slack-desc/libXxf86dga b/source/x/x11/slack-desc/libXxf86dga
index 99492bc2..88023255 100644
--- a/source/x/x11/slack-desc/libXxf86dga
+++ b/source/x/x11/slack-desc/libXxf86dga
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-libXxf86dga: libXxf86dga
+libXxf86dga: libXxf86dga (client library for the XFree86-DGA extension)
 libXxf86dga:
 libXxf86dga: libXxf86dga is part of X11.
 libXxf86dga:
diff --git a/source/x/x11/slack-desc/libXxf86misc b/source/x/x11/slack-desc/libXxf86misc
index 8c69dedb..ccc2c29b 100644
--- a/source/x/x11/slack-desc/libXxf86misc
+++ b/source/x/x11/slack-desc/libXxf86misc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
             |-----handy-ruler------------------------------------------------------|
-libXxf86misc: libXxf86misc
+libXxf86misc: libXxf86misc (Extension library for the XFree86-Misc X extension)
 libXxf86misc:
 libXxf86misc: libXxf86misc is part of X11.
 libXxf86misc:
diff --git a/source/x/x11/slack-desc/libXxf86vm b/source/x/x11/slack-desc/libXxf86vm
index 0c4820a0..872c8926 100644
--- a/source/x/x11/slack-desc/libXxf86vm
+++ b/source/x/x11/slack-desc/libXxf86vm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libXxf86vm: libXxf86vm
+libXxf86vm: libXxf86vm (library for the XFree86-VidMode X extension)
 libXxf86vm:
 libXxf86vm: libXxf86vm is part of X11.
 libXxf86vm:
diff --git a/source/x/x11/slack-desc/libdmx b/source/x/x11/slack-desc/libdmx
index f757df99..893fa670 100644
--- a/source/x/x11/slack-desc/libdmx
+++ b/source/x/x11/slack-desc/libdmx
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-libdmx: libdmx
+libdmx: libdmx (DMX (Distributed Multihead X) extension library)
 libdmx:
 libdmx: libdmx is part of X11.
 libdmx:
diff --git a/source/x/x11/slack-desc/libfontenc b/source/x/x11/slack-desc/libfontenc
index 78b26b02..0172d1ae 100644
--- a/source/x/x11/slack-desc/libfontenc
+++ b/source/x/x11/slack-desc/libfontenc
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libfontenc: libfontenc
+libfontenc: libfontenc (font encoding library)
 libfontenc:
 libfontenc: libfontenc is part of X11.
 libfontenc:
diff --git a/source/x/x11/slack-desc/liblbxutil b/source/x/x11/slack-desc/liblbxutil
deleted file mode 100644
index 0a42196e..00000000
--- a/source/x/x11/slack-desc/liblbxutil
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-          |-----handy-ruler------------------------------------------------------|
-liblbxutil: liblbxutil
-liblbxutil:
-liblbxutil: liblbxutil is part of X11.
-liblbxutil:
-liblbxutil: For more information about the X.Org Foundation (the providers of the
-liblbxutil: X.Org implementation of the X Window System), see their website:
-liblbxutil:
-liblbxutil: http://www.x.org
-liblbxutil:
-liblbxutil:
-liblbxutil:
diff --git a/source/x/x11/slack-desc/liboldX b/source/x/x11/slack-desc/liboldX
deleted file mode 100644
index d8e65ba4..00000000
--- a/source/x/x11/slack-desc/liboldX
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-liboldX: liboldX
-liboldX:
-liboldX: liboldX is part of X11.
-liboldX:
-liboldX: For more information about the X.Org Foundation (the providers of the
-liboldX: X.Org implementation of the X Window System), see their website:
-liboldX:
-liboldX: http://www.x.org
-liboldX:
-liboldX:
-liboldX:
diff --git a/source/x/x11/slack-desc/libpciaccess b/source/x/x11/slack-desc/libpciaccess
index 0c499f77..c3d6d648 100644
--- a/source/x/x11/slack-desc/libpciaccess
+++ b/source/x/x11/slack-desc/libpciaccess
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
             |-----handy-ruler------------------------------------------------------|
-libpciaccess: libpciaccess
+libpciaccess: libpciaccess (Generic PCI access library)
 libpciaccess:
 libpciaccess: libpciaccess is part of X11.
 libpciaccess:
diff --git a/source/x/x11/slack-desc/libpthread-stubs b/source/x/x11/slack-desc/libpthread-stubs
index 8c0c0e5d..e64f33d3 100644
--- a/source/x/x11/slack-desc/libpthread-stubs
+++ b/source/x/x11/slack-desc/libpthread-stubs
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-libpthread-stubs: libpthread-stubs
+libpthread-stubs: libpthread-stubs (thread support stubs)
 libpthread-stubs:
-libpthread-stubs: libpthread-stubs is part of X11.
+libpthread-stubs: This library provides weak aliases for pthread functions not provided
+libpthread-stubs: in libc or otherwise available by default. Libraries like libxcb rely
+libpthread-stubs: on pthread stubs to use pthreads optionally, becoming thread-safe
+libpthread-stubs: when linked to libpthread, while avoiding any performance hit when
+libpthread-stubs: running single-threaded.
 libpthread-stubs:
-libpthread-stubs: For more information about the X.Org Foundation (the providers of the
-libpthread-stubs: X.Org implementation of the X Window System), see their website:
-libpthread-stubs:
-libpthread-stubs: http://www.x.org
 libpthread-stubs:
 libpthread-stubs:
 libpthread-stubs:
diff --git a/source/x/x11/slack-desc/libxkbfile b/source/x/x11/slack-desc/libxkbfile
index ffaa00a4..fe2d59f2 100644
--- a/source/x/x11/slack-desc/libxkbfile
+++ b/source/x/x11/slack-desc/libxkbfile
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-libxkbfile: libxkbfile
+libxkbfile: libxkbfile (X11 keyboard file manipulation library)
 libxkbfile:
 libxkbfile: libxkbfile is part of X11.
 libxkbfile:
diff --git a/source/x/x11/slack-desc/libxkbui b/source/x/x11/slack-desc/libxkbui
deleted file mode 100644
index 332ad414..00000000
--- a/source/x/x11/slack-desc/libxkbui
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-libxkbui: libxkbui
-libxkbui:
-libxkbui: libxkbui is part of X11.
-libxkbui:
-libxkbui: For more information about the X.Org Foundation (the providers of the
-libxkbui: X.Org implementation of the X Window System), see their website:
-libxkbui:
-libxkbui: http://www.x.org
-libxkbui:
-libxkbui:
-libxkbui:
diff --git a/source/x/x11/slack-desc/listres b/source/x/x11/slack-desc/listres
index 16ae55b5..f14aa2ce 100644
--- a/source/x/x11/slack-desc/listres
+++ b/source/x/x11/slack-desc/listres
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-listres: listres
+listres: listres (X11 resource lister)
+listres:
+listres: The listres program generates a list of X resources for a widget in
+listres: an X client written using a toolkit based on libXt.
+listres:
 listres:
-listres: listres is part of X11.
 listres:
-listres: For more information about the X.Org Foundation (the providers of the
-listres: X.Org implementation of the X Window System), see their website:
 listres:
-listres: http://www.x.org
 listres:
 listres:
 listres:
diff --git a/source/x/x11/slack-desc/lndir b/source/x/x11/slack-desc/lndir
index 0a73ae95..c9a27e20 100644
--- a/source/x/x11/slack-desc/lndir
+++ b/source/x/x11/slack-desc/lndir
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-lndir: lndir
+lndir: lndir (create shadow directory of symbolic links to another directory)
 lndir:
 lndir: lndir is part of X11.
 lndir:
diff --git a/source/x/x11/slack-desc/luit b/source/x/x11/slack-desc/luit
index ab7f144f..cd9d9664 100644
--- a/source/x/x11/slack-desc/luit
+++ b/source/x/x11/slack-desc/luit
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-luit: luit
+luit: luit (character encoding convertor for X11 terminals)
 luit:
-luit: luit is part of X11.
+luit: Luit is a filter that can be run between an arbitrary application and
+luit: a UTF-8 terminal emulator such as xterm.  It will convert application
+luit: output from the locale's encoding into UTF-8, and convert terminal
+luit: input from UTF-8 into the locale's encoding.
 luit:
-luit: For more information about the X.Org Foundation (the providers of the
-luit: X.Org implementation of the X Window System), see their website:
 luit:
-luit: http://www.x.org
 luit:
 luit:
 luit:
diff --git a/source/x/x11/slack-desc/makedepend b/source/x/x11/slack-desc/makedepend
index 444713af..ec831dd4 100644
--- a/source/x/x11/slack-desc/makedepend
+++ b/source/x/x11/slack-desc/makedepend
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-makedepend: makedepend
+makedepend: makedepend (create dependencies in makefiles)
 makedepend:
 makedepend: makedepend is part of X11.
 makedepend:
diff --git a/source/x/x11/slack-desc/mkcomposecache b/source/x/x11/slack-desc/mkcomposecache
index c219f99f..ed04a554 100644
--- a/source/x/x11/slack-desc/mkcomposecache
+++ b/source/x/x11/slack-desc/mkcomposecache
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-mkcomposecache: mkcomposecache
+mkcomposecache: mkcomposecache (creates global (system-wide) Compose cache files)
 mkcomposecache:
 mkcomposecache: mkcomposecache is part of X11.
 mkcomposecache:
diff --git a/source/x/x11/slack-desc/mkfontdir b/source/x/x11/slack-desc/mkfontdir
index 681db8f2..3f97b7e8 100644
--- a/source/x/x11/slack-desc/mkfontdir
+++ b/source/x/x11/slack-desc/mkfontdir
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-mkfontdir: mkfontdir
+mkfontdir: mkfontdir (X11 font utility)
 mkfontdir:
-mkfontdir: mkfontdir is part of X11.
+mkfontdir: mkfontdir creates the fonts.dir files needed by the legacy X server
+mkfontdir: core font system. The current implementation is a simple wrapper
+mkfontdir: script around the mkfontscale program, which must be built and
+mkfontdir: installed first.
 mkfontdir:
-mkfontdir: For more information about the X.Org Foundation (the providers of the
-mkfontdir: X.Org implementation of the X Window System), see their website:
 mkfontdir:
-mkfontdir: http://www.x.org
 mkfontdir:
 mkfontdir:
 mkfontdir:
diff --git a/source/x/x11/slack-desc/mkfontscale b/source/x/x11/slack-desc/mkfontscale
index 57c6f825..176336f7 100644
--- a/source/x/x11/slack-desc/mkfontscale
+++ b/source/x/x11/slack-desc/mkfontscale
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-mkfontscale: mkfontscale
+mkfontscale: mkfontscale (X11 font utility)
+mkfontscale:
+mkfontscale: mkfontscale creates the fonts.scale and fonts.dir index files used
+mkfontscale: by the legacy X11 font system.
+mkfontscale:
 mkfontscale:
-mkfontscale: mkfontscale is part of X11.
 mkfontscale:
-mkfontscale: For more information about the X.Org Foundation (the providers of the
-mkfontscale: X.Org implementation of the X Window System), see their website:
 mkfontscale:
-mkfontscale: http://www.x.org
 mkfontscale:
 mkfontscale:
 mkfontscale:
diff --git a/source/x/x11/slack-desc/oclock b/source/x/x11/slack-desc/oclock
index 7e4b2acd..1ec87ceb 100644
--- a/source/x/x11/slack-desc/oclock
+++ b/source/x/x11/slack-desc/oclock
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-oclock: oclock
+oclock: oclock (X11 on-screen clock)
+oclock:
+oclock: oclock is a simple analog clock using the SHAPE extension to make a
+oclock: round (possibly transparent) window.
+oclock:
 oclock:
-oclock: oclock is part of X11.
 oclock:
-oclock: For more information about the X.Org Foundation (the providers of the
-oclock: X.Org implementation of the X Window System), see their website:
 oclock:
-oclock: http://www.x.org
 oclock:
 oclock:
 oclock:
diff --git a/source/x/x11/slack-desc/pixman b/source/x/x11/slack-desc/pixman
index 350e53dd..73c93440 100644
--- a/source/x/x11/slack-desc/pixman
+++ b/source/x/x11/slack-desc/pixman
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-pixman: pixman
+pixman: pixman (pixel manipulation library)
 pixman:
 pixman: pixman contains low-level pixel manipulation routines and is used by
 pixman: both xorg and cairo.
diff --git a/source/x/x11/slack-desc/printproto b/source/x/x11/slack-desc/printproto
index 3aa4fe07..28fb1a2a 100644
--- a/source/x/x11/slack-desc/printproto
+++ b/source/x/x11/slack-desc/printproto
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-printproto: printproto
+printproto: printproto (C prototypes for X11 Xprint extension)
+printproto:
+printproto: Xprint extension to the X11 protocol - a portable, network-transparent
+printproto: printing system
+printproto:
 printproto:
-printproto: printproto is part of X11.
 printproto:
-printproto: For more information about the X.Org Foundation (the providers of the
-printproto: X.Org implementation of the X Window System), see their website:
 printproto:
-printproto: http://www.x.org
 printproto:
 printproto:
 printproto:
diff --git a/source/x/x11/slack-desc/proxymngr b/source/x/x11/slack-desc/proxymngr
deleted file mode 100644
index 63a90660..00000000
--- a/source/x/x11/slack-desc/proxymngr
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-         |-----handy-ruler------------------------------------------------------|
-proxymngr: proxymngr
-proxymngr:
-proxymngr: proxymngr is part of X11.
-proxymngr:
-proxymngr: For more information about the X.Org Foundation (the providers of the
-proxymngr: X.Org implementation of the X Window System), see their website:
-proxymngr:
-proxymngr: http://www.x.org
-proxymngr:
-proxymngr:
-proxymngr:
diff --git a/source/x/x11/slack-desc/randrproto b/source/x/x11/slack-desc/randrproto
index a56827c9..f97ca095 100644
--- a/source/x/x11/slack-desc/randrproto
+++ b/source/x/x11/slack-desc/randrproto
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-randrproto: randrproto
+randrproto: randrproto (C prototypes for RandR)
+randrproto:
+randrproto: RandR is the X11 Resize and Rotate Extension
+randrproto:
+randrproto:
 randrproto:
-randrproto: randrproto is part of X11.
 randrproto:
-randrproto: For more information about the X.Org Foundation (the providers of the
-randrproto: X.Org implementation of the X Window System), see their website:
 randrproto:
-randrproto: http://www.x.org
 randrproto:
 randrproto:
 randrproto:
diff --git a/source/x/x11/slack-desc/recordproto b/source/x/x11/slack-desc/recordproto
index caecfd7e..4fc28e90 100644
--- a/source/x/x11/slack-desc/recordproto
+++ b/source/x/x11/slack-desc/recordproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-recordproto: recordproto
+recordproto: recordproto (C prototypes for X Record Extension)
 recordproto:
 recordproto: recordproto is part of X11.
 recordproto:
diff --git a/source/x/x11/slack-desc/rendercheck b/source/x/x11/slack-desc/rendercheck
index 9503468e..e8a502ea 100644
--- a/source/x/x11/slack-desc/rendercheck
+++ b/source/x/x11/slack-desc/rendercheck
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-rendercheck: rendercheck
+rendercheck: rendercheck (test X11 Render support)
+rendercheck:
+rendercheck: rendercheck is a program to test a Render extension implementation
+rendercheck: against separate calculations of expected output.
+rendercheck:
 rendercheck:
-rendercheck: rendercheck is part of X11.
 rendercheck:
-rendercheck: For more information about the X.Org Foundation (the providers of the
-rendercheck: X.Org implementation of the X Window System), see their website:
 rendercheck:
-rendercheck: http://www.x.org
 rendercheck:
 rendercheck:
 rendercheck:
diff --git a/source/x/x11/slack-desc/renderproto b/source/x/x11/slack-desc/renderproto
index cdc21f01..ef667f97 100644
--- a/source/x/x11/slack-desc/renderproto
+++ b/source/x/x11/slack-desc/renderproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-renderproto: renderproto
+renderproto: renderproto (C prototypes for X Rendering Extension)
 renderproto:
 renderproto: renderproto is part of X11.
 renderproto:
diff --git a/source/x/x11/slack-desc/resourceproto b/source/x/x11/slack-desc/resourceproto
index 8303f74d..6881a8e5 100644
--- a/source/x/x11/slack-desc/resourceproto
+++ b/source/x/x11/slack-desc/resourceproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-resourceproto: resourceproto
+resourceproto: resourceproto (C prototypes for X Resource Extension)
 resourceproto:
 resourceproto: resourceproto is part of X11.
 resourceproto:
diff --git a/source/x/x11/slack-desc/rgb b/source/x/x11/slack-desc/rgb
index 34263a01..f339502e 100644
--- a/source/x/x11/slack-desc/rgb
+++ b/source/x/x11/slack-desc/rgb
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-rgb: rgb
+rgb: rgb (X color name database)
 rgb:
 rgb: rgb is part of X11.
 rgb:
diff --git a/source/x/x11/slack-desc/rstart b/source/x/x11/slack-desc/rstart
deleted file mode 100644
index e009e289..00000000
--- a/source/x/x11/slack-desc/rstart
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-rstart: rstart
-rstart:
-rstart: rstart is part of X11.
-rstart:
-rstart: For more information about the X.Org Foundation (the providers of the
-rstart: X.Org implementation of the X Window System), see their website:
-rstart:
-rstart: http://www.x.org
-rstart:
-rstart:
-rstart:
diff --git a/source/x/x11/slack-desc/scripts b/source/x/x11/slack-desc/scripts
deleted file mode 100644
index 549159b2..00000000
--- a/source/x/x11/slack-desc/scripts
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-scripts: scripts
-scripts:
-scripts: scripts is part of X11.
-scripts:
-scripts: For more information about the X.Org Foundation (the providers of the
-scripts: X.Org implementation of the X Window System), see their website:
-scripts:
-scripts: http://www.x.org
-scripts:
-scripts:
-scripts:
diff --git a/source/x/x11/slack-desc/scrnsaverproto b/source/x/x11/slack-desc/scrnsaverproto
index 70142f89..3218b7e7 100644
--- a/source/x/x11/slack-desc/scrnsaverproto
+++ b/source/x/x11/slack-desc/scrnsaverproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-scrnsaverproto: scrnsaverproto
+scrnsaverproto: scrnsaverproto (C prototypes for X11 MIT Screen Saver Extension)
 scrnsaverproto:
 scrnsaverproto: scrnsaverproto is part of X11.
 scrnsaverproto:
diff --git a/source/x/x11/slack-desc/sessreg b/source/x/x11/slack-desc/sessreg
index 8a85e326..0da458bb 100644
--- a/source/x/x11/slack-desc/sessreg
+++ b/source/x/x11/slack-desc/sessreg
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-sessreg: sessreg
+sessreg: sessreg (simple program for managing utmp/wtmp entries for X sessions)
+sessreg:
+sessreg: sessreg was originally written for use with xdm, but it may also be 
+sessreg: used with other display managers such as gdm or kdm.
+sessreg:
 sessreg:
-sessreg: sessreg is part of X11.
 sessreg:
-sessreg: For more information about the X.Org Foundation (the providers of the
-sessreg: X.Org implementation of the X Window System), see their website:
 sessreg:
-sessreg: http://www.x.org
 sessreg:
 sessreg:
 sessreg:
diff --git a/source/x/x11/slack-desc/setxkbmap b/source/x/x11/slack-desc/setxkbmap
index 99beaa92..a3b1841a 100644
--- a/source/x/x11/slack-desc/setxkbmap
+++ b/source/x/x11/slack-desc/setxkbmap
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-setxkbmap: setxkbmap
+setxkbmap: setxkbmap (change X11 keyboard layout)
 setxkbmap:
 setxkbmap: setxkbmap is part of X11.
 setxkbmap:
diff --git a/source/x/x11/slack-desc/showfont b/source/x/x11/slack-desc/showfont
index b53ce29a..24665efe 100644
--- a/source/x/x11/slack-desc/showfont
+++ b/source/x/x11/slack-desc/showfont
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-showfont: showfont
+showfont: showfont (displays data about a font from an X font server)
+showfont:
+showfont: The information shown includes font information, font properties,
+showfont: character metrics, and character bitmaps.
+showfont:
 showfont:
-showfont: showfont is part of X11.
 showfont:
-showfont: For more information about the X.Org Foundation (the providers of the
-showfont: X.Org implementation of the X Window System), see their website:
 showfont:
-showfont: http://www.x.org
 showfont:
 showfont:
 showfont:
diff --git a/source/x/x11/slack-desc/smproxy b/source/x/x11/slack-desc/smproxy
index a8bc5976..c40480a9 100644
--- a/source/x/x11/slack-desc/smproxy
+++ b/source/x/x11/slack-desc/smproxy
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-smproxy: smproxy
+smproxy: smproxy (X11 session management proxy)
+smproxy:
+smproxy: smproxy allows X applications that do not support X11R6 session
+smproxy: management to participate in an X11R6 session.
+smproxy:
 smproxy:
-smproxy: smproxy is part of X11.
 smproxy:
-smproxy: For more information about the X.Org Foundation (the providers of the
-smproxy: X.Org implementation of the X Window System), see their website:
 smproxy:
-smproxy: http://www.x.org
 smproxy:
 smproxy:
 smproxy:
diff --git a/source/x/x11/slack-desc/transset b/source/x/x11/slack-desc/transset
new file mode 100644
index 00000000..1e1128c5
--- /dev/null
+++ b/source/x/x11/slack-desc/transset
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+transset: transset (utility for setting opacity property)
+transset:
+transset: transset is a utility for setting opacity property.
+transset:
+transset: Some of the features:
+transset:   * select window by clicking (as transset)
+transset:   * select actual focused X11 window
+transset:   * select window by pointing
+transset:   * select by window name or id
+transset:   * force toggle
+transset:   * increase or decrease opacity
diff --git a/source/x/x11/slack-desc/trapproto b/source/x/x11/slack-desc/trapproto
deleted file mode 100644
index 5b0a2174..00000000
--- a/source/x/x11/slack-desc/trapproto
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-         |-----handy-ruler------------------------------------------------------|
-trapproto: trapproto
-trapproto:
-trapproto: trapproto is part of X11.
-trapproto:
-trapproto: For more information about the X.Org Foundation (the providers of the
-trapproto: X.Org implementation of the X Window System), see their website:
-trapproto:
-trapproto: http://www.x.org
-trapproto:
-trapproto:
-trapproto:
diff --git a/source/x/x11/slack-desc/twm b/source/x/x11/slack-desc/twm
index 78c09f21..590eec46 100644
--- a/source/x/x11/slack-desc/twm
+++ b/source/x/x11/slack-desc/twm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-twm: twm
+twm: twm (Tab Window Manager for the X Window System)
 twm:
 twm: twm is part of X11.
 twm:
diff --git a/source/x/x11/slack-desc/util-macros b/source/x/x11/slack-desc/util-macros
index 39426633..f339dfa8 100644
--- a/source/x/x11/slack-desc/util-macros
+++ b/source/x/x11/slack-desc/util-macros
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-util-macros: util-macros
+util-macros: util-macros (autoconf support for X11)
+util-macros:
+util-macros: This is a set of autoconf macros used by the configure.ac scripts in
+util-macros: other Xorg modular packages, and is needed to generate new versions
+util-macros: of their configure scripts with autoconf.
 util-macros:
-util-macros: util-macros is part of X11.
 util-macros:
-util-macros: For more information about the X.Org Foundation (the providers of the
-util-macros: X.Org implementation of the X Window System), see their website:
 util-macros:
-util-macros: http://www.x.org
 util-macros:
 util-macros:
 util-macros:
diff --git a/source/x/x11/slack-desc/videoproto b/source/x/x11/slack-desc/videoproto
index e90690c2..f65573bc 100644
--- a/source/x/x11/slack-desc/videoproto
+++ b/source/x/x11/slack-desc/videoproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-videoproto: videoproto
+videoproto: videoproto (C prototypes for X Video Extension)
 videoproto:
 videoproto: videoproto is part of X11.
 videoproto:
diff --git a/source/x/x11/slack-desc/viewres b/source/x/x11/slack-desc/viewres
index e710f02b..05682ea7 100644
--- a/source/x/x11/slack-desc/viewres
+++ b/source/x/x11/slack-desc/viewres
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-viewres: viewres
+viewres: viewres (view widget class hierarchy of the Athena Widget Set)
 viewres:
 viewres: viewres is part of X11.
 viewres:
diff --git a/source/x/x11/slack-desc/windowswmproto b/source/x/x11/slack-desc/windowswmproto
deleted file mode 100644
index 38e97728..00000000
--- a/source/x/x11/slack-desc/windowswmproto
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-windowswmproto: windowswmproto
-windowswmproto:
-windowswmproto: windowswmproto is part of X11.
-windowswmproto:
-windowswmproto: For more information about the X.Org Foundation (the providers of the
-windowswmproto: X.Org implementation of the X Window System), see their website:
-windowswmproto:
-windowswmproto: http://www.x.org
-windowswmproto:
-windowswmproto:
-windowswmproto:
diff --git a/source/x/x11/slack-desc/x11-app b/source/x/x11/slack-desc/x11-app
deleted file mode 100644
index 2667d321..00000000
--- a/source/x/x11/slack-desc/x11-app
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-x11-app: x11-app (the traditional collection of basic X apps)
-x11-app:
-x11-app: These are the basic X programs that come with the X Window System.
-x11-app:
-x11-app:
-x11-app:
-x11-app:
-x11-app:
-x11-app:
-x11-app:
-x11-app:
diff --git a/source/x/x11/slack-desc/x11-data b/source/x/x11/slack-desc/x11-data
deleted file mode 100644
index 0b8ef63b..00000000
--- a/source/x/x11/slack-desc/x11-data
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-x11-data: x11-data (data files used by X)
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
-x11-data:
diff --git a/source/x/x11/slack-desc/x11-doc b/source/x/x11/slack-desc/x11-doc
deleted file mode 100644
index 8ac7b8b9..00000000
--- a/source/x/x11/slack-desc/x11-doc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-x11-doc: x11-doc (documentation for X)
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
-x11-doc:
diff --git a/source/x/x11/slack-desc/x11-driver b/source/x/x11/slack-desc/x11-driver
deleted file mode 100644
index 3196549e..00000000
--- a/source/x/x11/slack-desc/x11-driver
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-          |-----handy-ruler------------------------------------------------------|
-x11-driver: x11-driver (input and output drivers for X)
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
-x11-driver:
diff --git a/source/x/x11/slack-desc/x11-font b/source/x/x11/slack-desc/x11-font
deleted file mode 100644
index b0bf50f6..00000000
--- a/source/x/x11/slack-desc/x11-font
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-x11-font: x11-font (fonts for X)
-x11-font:
-x11-font: Fonts for X.
-x11-font:
-x11-font:
-x11-font:
-x11-font:
-x11-font:
-x11-font:
-x11-font:
-x11-font:
diff --git a/source/x/x11/slack-desc/x11-lib b/source/x/x11/slack-desc/x11-lib
deleted file mode 100644
index 3090338c..00000000
--- a/source/x/x11/slack-desc/x11-lib
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-x11-lib: x11-lib (X11 libraries and header files)
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
-x11-lib:
diff --git a/source/x/x11/slack-desc/x11-proto b/source/x/x11/slack-desc/x11-proto
deleted file mode 100644
index 1c1f9766..00000000
--- a/source/x/x11/slack-desc/x11-proto
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-         |-----handy-ruler------------------------------------------------------|
-x11-proto: x11-proto (files used for developing X)
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
-x11-proto:
diff --git a/source/x/x11/slack-desc/x11-util b/source/x/x11/slack-desc/x11-util
deleted file mode 100644
index a5d30280..00000000
--- a/source/x/x11/slack-desc/x11-util
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-x11-util: x11-util (a set of handy utilities for X11)
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
-x11-util:
diff --git a/source/x/x11/slack-desc/x11perf b/source/x/x11/slack-desc/x11perf
index 8d6996ac..fc51a61e 100644
--- a/source/x/x11/slack-desc/x11perf
+++ b/source/x/x11/slack-desc/x11perf
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-x11perf: x11perf
+x11perf: x11perf (X11 server performance test program)
 x11perf:
 x11perf: x11perf is part of X11.
 x11perf:
diff --git a/source/x/x11/slack-desc/xauth b/source/x/x11/slack-desc/xauth
index 71829a5d..837b45bb 100644
--- a/source/x/x11/slack-desc/xauth
+++ b/source/x/x11/slack-desc/xauth
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xauth: xauth
+xauth: xauth (X11 authorization utility)
+xauth:
+xauth: The xauth program is used to edit and display the authorization
+xauth: information used in connecting to the X server.
+xauth:
 xauth:
-xauth: xauth is part of X11.
 xauth:
-xauth: For more information about the X.Org Foundation (the providers of the
-xauth: X.Org implementation of the X Window System), see their website:
 xauth:
-xauth: http://www.x.org
 xauth:
 xauth:
 xauth:
diff --git a/source/x/x11/slack-desc/xbacklight b/source/x/x11/slack-desc/xbacklight
index 914a6a79..45d0a7ab 100644
--- a/source/x/x11/slack-desc/xbacklight
+++ b/source/x/x11/slack-desc/xbacklight
@@ -5,15 +5,15 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-         |-----handy-ruler------------------------------------------------------|
-xbacklight: xbacklight
+          |-----handy-ruler------------------------------------------------------|
+xbacklight: xbacklight (adjust the backlight brightness where supported)
+xbacklight:
+xbacklight: It uses the RandR extension to find all outputs on the X server
+xbacklight: supporting backlight brightness control and changes them all in the
+xbacklight: same way.
 xbacklight:
-xbacklight: xbacklight is part of X11.
 xbacklight:
-xbacklight: For more information about the X.Org Foundation (the providers of the
-xbacklight: X.Org implementation of the X Window System), see their website:
 xbacklight:
-xbacklight: http://www.x.org
 xbacklight:
 xbacklight:
 xbacklight:
diff --git a/source/x/x11/slack-desc/xbiff b/source/x/x11/slack-desc/xbiff
index ef65aff3..289c9738 100644
--- a/source/x/x11/slack-desc/xbiff
+++ b/source/x/x11/slack-desc/xbiff
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xbiff: xbiff
+xbiff: xbiff (X11 mail notifier)
+xbiff:
+xbiff: xbiff provides graphical notification of new e-mail.  It only handles
+xbiff: mail stored in a filesystem accessible file, not via IMAP, POP or
+xbiff: other remote access protocols.
 xbiff:
-xbiff: xbiff is part of X11.
 xbiff:
-xbiff: For more information about the X.Org Foundation (the providers of the
-xbiff: X.Org implementation of the X Window System), see their website:
 xbiff:
-xbiff: http://www.x.org
 xbiff:
 xbiff:
 xbiff:
diff --git a/source/x/x11/slack-desc/xbitmaps b/source/x/x11/slack-desc/xbitmaps
index 91b0a4d2..cdcd8149 100644
--- a/source/x/x11/slack-desc/xbitmaps
+++ b/source/x/x11/slack-desc/xbitmaps
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xbitmaps: xbitmaps
+xbitmaps: xbitmaps (miscellaneous X bitmap files)
 xbitmaps:
 xbitmaps: xbitmaps is part of X11.
 xbitmaps:
diff --git a/source/x/x11/slack-desc/xcalc b/source/x/x11/slack-desc/xcalc
index d0f6d2e1..4e1101e6 100644
--- a/source/x/x11/slack-desc/xcalc
+++ b/source/x/x11/slack-desc/xcalc
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xcalc: xcalc
+xcalc: xcalc (X11 calculator)
+xcalc:
+xcalc: xcalc is a scientific calculator X11 client that can emulate a TI-30
+xcalc: or an HP-10C.
+xcalc:
 xcalc:
-xcalc: xcalc is part of X11.
 xcalc:
-xcalc: For more information about the X.Org Foundation (the providers of the
-xcalc: X.Org implementation of the X Window System), see their website:
 xcalc:
-xcalc: http://www.x.org
 xcalc:
 xcalc:
 xcalc:
diff --git a/source/x/x11/slack-desc/xcb-proto b/source/x/x11/slack-desc/xcb-proto
index 72736593..c66b7140 100644
--- a/source/x/x11/slack-desc/xcb-proto
+++ b/source/x/x11/slack-desc/xcb-proto
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-xcb-proto: xcb-proto
+xcb-proto: xcb-proto (X protocol C-language Binding protocol descriptions)
 xcb-proto:
-xcb-proto: xcb-proto is part of X11.
+xcb-proto: xcb-proto provides the XML-XCB protocol descriptions that libxcb
+xcb-proto: uses to generate the majority of its code and API. We provide them
+xcb-proto: separately from libxcb to allow reuse by other projects, such as
+xcb-proto: additional language bindings, protocol dissectors, or documentation
+xcb-proto: generators.
 xcb-proto:
-xcb-proto: For more information about the X.Org Foundation (the providers of the
-xcb-proto: X.Org implementation of the X Window System), see their website:
-xcb-proto:
-xcb-proto: http://www.x.org
 xcb-proto:
 xcb-proto:
 xcb-proto:
diff --git a/source/x/x11/slack-desc/xcb-util b/source/x/x11/slack-desc/xcb-util
index 45072298..040881be 100644
--- a/source/x/x11/slack-desc/xcb-util
+++ b/source/x/x11/slack-desc/xcb-util
@@ -5,8 +5,8 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-        |-----handy-ruler-------------------------------------------------------|
-xcb-util: xcb-util
+        |-----handy-ruler------------------------------------------------------|
+xcb-util: xcb-util (utility libraries for X protocol C-language Binding)
 xcb-util:
 xcb-util: xcb-util is part of X11.
 xcb-util:
diff --git a/source/x/x11/slack-desc/xcb-util-image b/source/x/x11/slack-desc/xcb-util-image
new file mode 100644
index 00000000..ffa50aa9
--- /dev/null
+++ b/source/x/x11/slack-desc/xcb-util-image
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xcb-util-image: xcb-util-image (port of Xlib's XImage and XShmImage functions)
+xcb-util-image:
+xcb-util-image: xcb-util-image provides a port of Xlib's XImage and XShmImage 
+xcb-util-image: functions.
+xcb-util-image:
+xcb-util-image:
+xcb-util-image:
+xcb-util-image:
+xcb-util-image:
+xcb-util-image:
+xcb-util-image:
diff --git a/source/x/x11/slack-desc/xcb-util-keysyms b/source/x/x11/slack-desc/xcb-util-keysyms
new file mode 100644
index 00000000..a629d39e
--- /dev/null
+++ b/source/x/x11/slack-desc/xcb-util-keysyms
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+xcb-util-keysyms: xcb-util-keysyms (keysyms library for XCB)
+xcb-util-keysyms:
+xcb-util-keysyms: xcb-util-keysyms provides the keysyms library, which handles
+xcb-util-keysyms: standard X key constants and conversion to/from keycodes.
+xcb-util-keysyms:
+xcb-util-keysyms:
+xcb-util-keysyms:
+xcb-util-keysyms:
+xcb-util-keysyms:
+xcb-util-keysyms:
+xcb-util-keysyms:
diff --git a/source/x/x11/slack-desc/xcb-util-renderutil b/source/x/x11/slack-desc/xcb-util-renderutil
new file mode 100644
index 00000000..1cec3346
--- /dev/null
+++ b/source/x/x11/slack-desc/xcb-util-renderutil
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------------|
+xcb-util-renderutil: xcb-util-renderutil (XCB renderutil library)
+xcb-util-renderutil:
+xcb-util-renderutil: xcb-util-renderutil provides the XCB renderutil library, which
+xcb-util-renderutil: includes some convenience functions for the Render extension.
+xcb-util-renderutil:
+xcb-util-renderutil:
+xcb-util-renderutil:
+xcb-util-renderutil:
+xcb-util-renderutil:
+xcb-util-renderutil:
+xcb-util-renderutil:
diff --git a/source/x/x11/slack-desc/xcb-util-wm b/source/x/x11/slack-desc/xcb-util-wm
new file mode 100644
index 00000000..8d5103a5
--- /dev/null
+++ b/source/x/x11/slack-desc/xcb-util-wm
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xcb-util-wm: xcb-util-wm (XCB libraries for EWMH and ICCCM)
+xcb-util-wm:
+xcb-util-wm: xcb-util-wm provides the XCB ewmh and iccm libraries, which include
+xcb-util-wm: client and window manager helpers for EWMH and ICCCM.
+xcb-util-wm:
+xcb-util-wm:
+xcb-util-wm:
+xcb-util-wm:
+xcb-util-wm:
+xcb-util-wm:
+xcb-util-wm:
diff --git a/source/x/x11/slack-desc/xclipboard b/source/x/x11/slack-desc/xclipboard
index 9f309205..fc0bcb45 100644
--- a/source/x/x11/slack-desc/xclipboard
+++ b/source/x/x11/slack-desc/xclipboard
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-xclipboard: xclipboard
+xclipboard: xclipboard (X11 clipboard utility)
 xclipboard:
-xclipboard: xclipboard is part of X11.
+xclipboard: xclipboard is used to collect and display text selections that are
+xclipboard: sent to the CLIPBOARD by other clients.  It is typically used to
+xclipboard: save CLIPBOARD selections for later use.  It stores each CLIPBOARD
+xclipboard: selection as a separate string, each of which can be selected.
 xclipboard:
-xclipboard: For more information about the X.Org Foundation (the providers of the
-xclipboard: X.Org implementation of the X Window System), see their website:
 xclipboard:
-xclipboard: http://www.x.org
 xclipboard:
 xclipboard:
 xclipboard:
diff --git a/source/x/x11/slack-desc/xclock b/source/x/x11/slack-desc/xclock
index 04781f5e..39cb9ff1 100644
--- a/source/x/x11/slack-desc/xclock
+++ b/source/x/x11/slack-desc/xclock
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xclock: xclock
+xclock: xclock (X11 on-screen clock)
+xclock:
+xclock: xclock is the classic X Window System clock utility.  It displays the
+xclock: time in analog or digital form, continuously updated at a frequency
+xclock: which may be specified by the user.
 xclock:
-xclock: xclock is part of X11.
 xclock:
-xclock: For more information about the X.Org Foundation (the providers of the
-xclock: X.Org implementation of the X Window System), see their website:
 xclock:
-xclock: http://www.x.org
 xclock:
 xclock:
 xclock:
diff --git a/source/x/x11/slack-desc/xcmiscproto b/source/x/x11/slack-desc/xcmiscproto
index a8c9dcc4..d7291251 100644
--- a/source/x/x11/slack-desc/xcmiscproto
+++ b/source/x/x11/slack-desc/xcmiscproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
            |-----handy-ruler------------------------------------------------------|
-xcmiscproto: xcmiscproto
+xcmiscproto: xcmiscproto (C prototypes for X11 XC-MISC Extension)
 xcmiscproto:
 xcmiscproto: xcmiscproto is part of X11.
 xcmiscproto:
diff --git a/source/x/x11/slack-desc/xcmsdb b/source/x/x11/slack-desc/xcmsdb
index 9075a18f..058adf03 100644
--- a/source/x/x11/slack-desc/xcmsdb
+++ b/source/x/x11/slack-desc/xcmsdb
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xcmsdb: xcmsdb
+xcmsdb: xcmsdb (X11 color utility)
 xcmsdb:
-xcmsdb: xcmsdb is part of X11.
+xcmsdb: xcmsdb is used to load, query, or remove Device Color Characterization
+xcmsdb: data stored in properties on the root window of a screen as specified
+xcmsdb: in section 7, Device Color Characterization, of the X11 Inter-Client
+xcmsdb: Communication Conventions Manual (ICCCM).
 xcmsdb:
-xcmsdb: For more information about the X.Org Foundation (the providers of the
-xcmsdb: X.Org implementation of the X Window System), see their website:
 xcmsdb:
-xcmsdb: http://www.x.org
 xcmsdb:
 xcmsdb:
 xcmsdb:
diff --git a/source/x/x11/slack-desc/xcompmgr b/source/x/x11/slack-desc/xcompmgr
index 1381b7be..f5527a84 100644
--- a/source/x/x11/slack-desc/xcompmgr
+++ b/source/x/x11/slack-desc/xcompmgr
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xcompmgr: xcompmgr
+xcompmgr: xcompmgr (X11 compositing manager)
+xcompmgr:
+xcompmgr: xcompmgr is a sample compositing manager for X servers supporting the
+xcompmgr: XFIXES, DAMAGE, RENDER, and COMPOSITE extensions.  It enables basic
+xcompmgr: eye-candy effects.
 xcompmgr:
-xcompmgr: xcompmgr is part of X11.
 xcompmgr:
-xcompmgr: For more information about the X.Org Foundation (the providers of the
-xcompmgr: X.Org implementation of the X Window System), see their website:
 xcompmgr:
-xcompmgr: http://www.x.org
 xcompmgr:
 xcompmgr:
 xcompmgr:
diff --git a/source/x/x11/slack-desc/xconsole b/source/x/x11/slack-desc/xconsole
index f3a8f2bd..2a543f2e 100644
--- a/source/x/x11/slack-desc/xconsole
+++ b/source/x/x11/slack-desc/xconsole
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xconsole: xconsole
+xconsole: xconsole (X11 console)
+xconsole:
+xconsole: xconsole displays in a X11 window the messages which are usually sent
+xconsole: to /dev/console
+xconsole:
 xconsole:
-xconsole: xconsole is part of X11.
 xconsole:
-xconsole: For more information about the X.Org Foundation (the providers of the
-xconsole: X.Org implementation of the X Window System), see their website:
 xconsole:
-xconsole: http://www.x.org
 xconsole:
 xconsole:
 xconsole:
diff --git a/source/x/x11/slack-desc/xcursor-themes b/source/x/x11/slack-desc/xcursor-themes
index d3ffeeb5..dbe8023e 100644
--- a/source/x/x11/slack-desc/xcursor-themes
+++ b/source/x/x11/slack-desc/xcursor-themes
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xcursor-themes: xcursor-themes
+xcursor-themes: xcursor-themes (X11 cursor themes)
+xcursor-themes:
+xcursor-themes: This is a default set of cursor themes for use with libXcursor,
+xcursor-themes: originally created for the XFree86 Project, and now shipped as part
+xcursor-themes: of the X.Org software distribution.
 xcursor-themes:
-xcursor-themes: xcursor-themes is part of X11.
 xcursor-themes:
-xcursor-themes: For more information about the X.Org Foundation (the providers of the
-xcursor-themes: X.Org implementation of the X Window System), see their website:
 xcursor-themes:
-xcursor-themes: http://www.x.org
 xcursor-themes:
 xcursor-themes:
 xcursor-themes:
diff --git a/source/x/x11/slack-desc/xcursorgen b/source/x/x11/slack-desc/xcursorgen
index bce69340..b084b9d3 100644
--- a/source/x/x11/slack-desc/xcursorgen
+++ b/source/x/x11/slack-desc/xcursorgen
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-xcursorgen: xcursorgen
+xcursorgen: xcursorgen (prepares X11 cursor sets for use with libXcursor)
 xcursorgen:
 xcursorgen: xcursorgen is part of X11.
 xcursorgen:
diff --git a/source/x/x11/slack-desc/xdbedizzy b/source/x/x11/slack-desc/xdbedizzy
index 03ecda05..122d3cfc 100644
--- a/source/x/x11/slack-desc/xdbedizzy
+++ b/source/x/x11/slack-desc/xdbedizzy
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-xdbedizzy: xdbedizzy
+xdbedizzy: xdbedizzy (X11 test utility)
+xdbedizzy:
+xdbedizzy: xdbedizzy is a demo of the X11 Double Buffer Extension (DBE) creating
+xdbedizzy: a double buffered spinning scene.
+xdbedizzy:
 xdbedizzy:
-xdbedizzy: xdbedizzy is part of X11.
 xdbedizzy:
-xdbedizzy: For more information about the X.Org Foundation (the providers of the
-xdbedizzy: X.Org implementation of the X Window System), see their website:
 xdbedizzy:
-xdbedizzy: http://www.x.org
 xdbedizzy:
 xdbedizzy:
 xdbedizzy:
diff --git a/source/x/x11/slack-desc/xditview b/source/x/x11/slack-desc/xditview
index 82b175fb..60eebb74 100644
--- a/source/x/x11/slack-desc/xditview
+++ b/source/x/x11/slack-desc/xditview
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xditview: xditview
+xditview: xditview (displays ditroff output on an X display)
 xditview:
 xditview: xditview is part of X11.
 xditview:
diff --git a/source/x/x11/slack-desc/xdm b/source/x/x11/slack-desc/xdm
index 88446a5e..12169808 100644
--- a/source/x/x11/slack-desc/xdm
+++ b/source/x/x11/slack-desc/xdm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xdm: xdm
+xdm: xdm (X11 display manager)
 xdm:
 xdm: xdm is part of X11.
 xdm:
diff --git a/source/x/x11/slack-desc/xdpyinfo b/source/x/x11/slack-desc/xdpyinfo
index 80af8f41..8c6c48ff 100644
--- a/source/x/x11/slack-desc/xdpyinfo
+++ b/source/x/x11/slack-desc/xdpyinfo
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xdpyinfo: xdpyinfo
+xdpyinfo: xdpyinfo (utility for displaying information about an X server)
 xdpyinfo:
 xdpyinfo: xdpyinfo is part of X11.
 xdpyinfo:
diff --git a/source/x/x11/slack-desc/xdriinfo b/source/x/x11/slack-desc/xdriinfo
index e5850b3a..bcddebfd 100644
--- a/source/x/x11/slack-desc/xdriinfo
+++ b/source/x/x11/slack-desc/xdriinfo
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xdriinfo: xdriinfo
+xdriinfo: xdriinfo (query configuration information of X11 DRI drivers)
 xdriinfo:
 xdriinfo: xdriinfo is part of X11.
 xdriinfo:
diff --git a/source/x/x11/slack-desc/xedit b/source/x/x11/slack-desc/xedit
index 00e969ce..6916c0c7 100644
--- a/source/x/x11/slack-desc/xedit
+++ b/source/x/x11/slack-desc/xedit
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xedit: xedit
+xedit: xedit (simple text editor for X)
 xedit:
 xedit: xedit is part of X11.
 xedit:
diff --git a/source/x/x11/slack-desc/xev b/source/x/x11/slack-desc/xev
index 6e95b7f9..4e78a1b6 100644
--- a/source/x/x11/slack-desc/xev
+++ b/source/x/x11/slack-desc/xev
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xev: xev
-xev:
-xev: xev is part of X11.
-xev:
-xev: For more information about the X.Org Foundation (the providers of the
-xev: X.Org implementation of the X Window System), see their website:
-xev:
-xev: http://www.x.org
+xev: xev (X11 event viewer)
 xev:
+xev: xev creates a window and then asks the X server to send it X11 events
+xev: whenever anything happens to the window (such as it being moved,
+xev: resized, typed in, clicked in, etc.).  You can also attach it to an
+xev: existing window.  It is useful for seeing what causes events to occur
+xev: and to display the information that they contain; it is essentially
+xev: a debugging and development tool, and should not be needed in normal
+xev: usage.
 xev:
 xev:
diff --git a/source/x/x11/slack-desc/xextproto b/source/x/x11/slack-desc/xextproto
index 53df9fed..6ea870d0 100644
--- a/source/x/x11/slack-desc/xextproto
+++ b/source/x/x11/slack-desc/xextproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-xextproto: xextproto
+xextproto: xextproto (C prototypes for X Protocol Extensions)
 xextproto:
 xextproto: xextproto is part of X11.
 xextproto:
diff --git a/source/x/x11/slack-desc/xeyes b/source/x/x11/slack-desc/xeyes
index ddf82f0d..7e1297ee 100644
--- a/source/x/x11/slack-desc/xeyes
+++ b/source/x/x11/slack-desc/xeyes
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xeyes: xeyes
+xeyes: xeyes (a follow the mouse X demo, using the X SHAPE extension)
 xeyes:
 xeyes: xeyes is part of X11.
 xeyes:
diff --git a/source/x/x11/slack-desc/xf86-input-acecad b/source/x/x11/slack-desc/xf86-input-acecad
index 26ca95ce..e3421df5 100644
--- a/source/x/x11/slack-desc/xf86-input-acecad
+++ b/source/x/x11/slack-desc/xf86-input-acecad
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-input-acecad: xf86-input-acecad
+xf86-input-acecad: xf86-input-acecad (Acecad Flair input driver for the Xorg X server)
 xf86-input-acecad:
 xf86-input-acecad: xf86-input-acecad is part of X11.
 xf86-input-acecad:
diff --git a/source/x/x11/slack-desc/xf86-input-aiptek b/source/x/x11/slack-desc/xf86-input-aiptek
index f7721e57..1ed24243 100644
--- a/source/x/x11/slack-desc/xf86-input-aiptek
+++ b/source/x/x11/slack-desc/xf86-input-aiptek
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-input-aiptek: xf86-input-aiptek
+xf86-input-aiptek: xf86-input-aiptek (Aiptek USB Digital Tablet Input Driver for Linux)
 xf86-input-aiptek:
 xf86-input-aiptek: xf86-input-aiptek is part of X11.
 xf86-input-aiptek:
diff --git a/source/x/x11/slack-desc/xf86-input-calcomp b/source/x/x11/slack-desc/xf86-input-calcomp
deleted file mode 100644
index 76dd2653..00000000
--- a/source/x/x11/slack-desc/xf86-input-calcomp
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-calcomp: xf86-input-calcomp
-xf86-input-calcomp:
-xf86-input-calcomp: xf86-input-calcomp is part of X11.
-xf86-input-calcomp:
-xf86-input-calcomp: For more information about the X.Org Foundation (the providers of the
-xf86-input-calcomp: X.Org implementation of the X Window System), see their website:
-xf86-input-calcomp:
-xf86-input-calcomp: http://www.x.org
-xf86-input-calcomp:
-xf86-input-calcomp:
-xf86-input-calcomp:
diff --git a/source/x/x11/slack-desc/xf86-input-citron b/source/x/x11/slack-desc/xf86-input-citron
deleted file mode 100644
index 5548268a..00000000
--- a/source/x/x11/slack-desc/xf86-input-citron
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-input-citron: xf86-input-citron
-xf86-input-citron:
-xf86-input-citron: xf86-input-citron is part of X11.
-xf86-input-citron:
-xf86-input-citron: For more information about the X.Org Foundation (the providers of the
-xf86-input-citron: X.Org implementation of the X Window System), see their website:
-xf86-input-citron:
-xf86-input-citron: http://www.x.org
-xf86-input-citron:
-xf86-input-citron:
-xf86-input-citron:
diff --git a/source/x/x11/slack-desc/xf86-input-digitaledge b/source/x/x11/slack-desc/xf86-input-digitaledge
deleted file mode 100644
index a199da40..00000000
--- a/source/x/x11/slack-desc/xf86-input-digitaledge
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                      |-----handy-ruler------------------------------------------------------|
-xf86-input-digitaledge: xf86-input-digitaledge
-xf86-input-digitaledge:
-xf86-input-digitaledge: xf86-input-digitaledge is part of X11.
-xf86-input-digitaledge:
-xf86-input-digitaledge: For more information about the X.Org Foundation (the providers of the
-xf86-input-digitaledge: X.Org implementation of the X Window System), see their website:
-xf86-input-digitaledge:
-xf86-input-digitaledge: http://www.x.org
-xf86-input-digitaledge:
-xf86-input-digitaledge:
-xf86-input-digitaledge:
diff --git a/source/x/x11/slack-desc/xf86-input-dmc b/source/x/x11/slack-desc/xf86-input-dmc
deleted file mode 100644
index 890f92e9..00000000
--- a/source/x/x11/slack-desc/xf86-input-dmc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-xf86-input-dmc: xf86-input-dmc
-xf86-input-dmc:
-xf86-input-dmc: xf86-input-dmc is part of X11.
-xf86-input-dmc:
-xf86-input-dmc: For more information about the X.Org Foundation (the providers of the
-xf86-input-dmc: X.Org implementation of the X Window System), see their website:
-xf86-input-dmc:
-xf86-input-dmc: http://www.x.org
-xf86-input-dmc:
-xf86-input-dmc:
-xf86-input-dmc:
diff --git a/source/x/x11/slack-desc/xf86-input-dynapro b/source/x/x11/slack-desc/xf86-input-dynapro
deleted file mode 100644
index 346eefe8..00000000
--- a/source/x/x11/slack-desc/xf86-input-dynapro
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-dynapro: xf86-input-dynapro
-xf86-input-dynapro:
-xf86-input-dynapro: xf86-input-dynapro is part of X11.
-xf86-input-dynapro:
-xf86-input-dynapro: For more information about the X.Org Foundation (the providers of the
-xf86-input-dynapro: X.Org implementation of the X Window System), see their website:
-xf86-input-dynapro:
-xf86-input-dynapro: http://www.x.org
-xf86-input-dynapro:
-xf86-input-dynapro:
-xf86-input-dynapro:
diff --git a/source/x/x11/slack-desc/xf86-input-elo2300 b/source/x/x11/slack-desc/xf86-input-elo2300
deleted file mode 100644
index 6c0bdd57..00000000
--- a/source/x/x11/slack-desc/xf86-input-elo2300
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-elo2300: xf86-input-elo2300
-xf86-input-elo2300:
-xf86-input-elo2300: xf86-input-elo2300 is part of X11.
-xf86-input-elo2300:
-xf86-input-elo2300: For more information about the X.Org Foundation (the providers of the
-xf86-input-elo2300: X.Org implementation of the X Window System), see their website:
-xf86-input-elo2300:
-xf86-input-elo2300: http://www.x.org
-xf86-input-elo2300:
-xf86-input-elo2300:
-xf86-input-elo2300:
diff --git a/source/x/x11/slack-desc/xf86-input-elographics b/source/x/x11/slack-desc/xf86-input-elographics
deleted file mode 100644
index 1e256565..00000000
--- a/source/x/x11/slack-desc/xf86-input-elographics
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                      |-----handy-ruler------------------------------------------------------|
-xf86-input-elographics: xf86-input-elographics
-xf86-input-elographics:
-xf86-input-elographics: xf86-input-elographics is part of X11.
-xf86-input-elographics:
-xf86-input-elographics: For more information about the X.Org Foundation (the providers of the
-xf86-input-elographics: X.Org implementation of the X Window System), see their website:
-xf86-input-elographics:
-xf86-input-elographics: http://www.x.org
-xf86-input-elographics:
-xf86-input-elographics:
-xf86-input-elographics:
diff --git a/source/x/x11/slack-desc/xf86-input-evdev b/source/x/x11/slack-desc/xf86-input-evdev
index 0adcb026..93aeb3f6 100644
--- a/source/x/x11/slack-desc/xf86-input-evdev
+++ b/source/x/x11/slack-desc/xf86-input-evdev
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-input-evdev: xf86-input-evdev
+xf86-input-evdev: xf86-input-evdev (Generic Linux input driver for the Xorg X server)
 xf86-input-evdev:
 xf86-input-evdev: xf86-input-evdev is part of X11.
 xf86-input-evdev:
diff --git a/source/x/x11/slack-desc/xf86-input-fpit b/source/x/x11/slack-desc/xf86-input-fpit
deleted file mode 100644
index 51ee433e..00000000
--- a/source/x/x11/slack-desc/xf86-input-fpit
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-xf86-input-fpit: xf86-input-fpit
-xf86-input-fpit:
-xf86-input-fpit: xf86-input-fpit is part of X11.
-xf86-input-fpit:
-xf86-input-fpit: For more information about the X.Org Foundation (the providers of the
-xf86-input-fpit: X.Org implementation of the X Window System), see their website:
-xf86-input-fpit:
-xf86-input-fpit: http://www.x.org
-xf86-input-fpit:
-xf86-input-fpit:
-xf86-input-fpit:
diff --git a/source/x/x11/slack-desc/xf86-input-hyperpen b/source/x/x11/slack-desc/xf86-input-hyperpen
deleted file mode 100644
index f6d6bda8..00000000
--- a/source/x/x11/slack-desc/xf86-input-hyperpen
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------------|
-xf86-input-hyperpen: xf86-input-hyperpen
-xf86-input-hyperpen:
-xf86-input-hyperpen: xf86-input-hyperpen is part of X11.
-xf86-input-hyperpen:
-xf86-input-hyperpen: For more information about the X.Org Foundation (the providers of the
-xf86-input-hyperpen: X.Org implementation of the X Window System), see their website:
-xf86-input-hyperpen:
-xf86-input-hyperpen: http://www.x.org
-xf86-input-hyperpen:
-xf86-input-hyperpen:
-xf86-input-hyperpen:
diff --git a/source/x/x11/slack-desc/xf86-input-jamstudio b/source/x/x11/slack-desc/xf86-input-jamstudio
deleted file mode 100644
index 70426117..00000000
--- a/source/x/x11/slack-desc/xf86-input-jamstudio
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                    |-----handy-ruler------------------------------------------------------|
-xf86-input-jamstudio: xf86-input-jamstudio
-xf86-input-jamstudio:
-xf86-input-jamstudio: xf86-input-jamstudio is part of X11.
-xf86-input-jamstudio:
-xf86-input-jamstudio: For more information about the X.Org Foundation (the providers of the
-xf86-input-jamstudio: X.Org implementation of the X Window System), see their website:
-xf86-input-jamstudio:
-xf86-input-jamstudio: http://www.x.org
-xf86-input-jamstudio:
-xf86-input-jamstudio:
-xf86-input-jamstudio:
diff --git a/source/x/x11/slack-desc/xf86-input-joystick b/source/x/x11/slack-desc/xf86-input-joystick
index 3a43a254..46963b88 100644
--- a/source/x/x11/slack-desc/xf86-input-joystick
+++ b/source/x/x11/slack-desc/xf86-input-joystick
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                    |-----handy-ruler------------------------------------------------------|
-xf86-input-joystick: xf86-input-joystick
+xf86-input-joystick: xf86-input-joystick (Joystick input driver for the Xorg X server)
 xf86-input-joystick:
 xf86-input-joystick: xf86-input-joystick is part of X11.
 xf86-input-joystick:
diff --git a/source/x/x11/slack-desc/xf86-input-keyboard b/source/x/x11/slack-desc/xf86-input-keyboard
index 640e2b55..e72beb41 100644
--- a/source/x/x11/slack-desc/xf86-input-keyboard
+++ b/source/x/x11/slack-desc/xf86-input-keyboard
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                    |-----handy-ruler------------------------------------------------------|
-xf86-input-keyboard: xf86-input-keyboard
+xf86-input-keyboard: kbd (Keyboard input driver for the Xorg X server)
+xf86-input-keyboard:
+xf86-input-keyboard: This is the non-evdev keyboard driver for X.  Most Linux systems
+xf86-input-keyboard: should be using the evdev driver to handle input devices such as
+xf86-input-keyboard: keyboards and mice, but this driver may be useful as a fallback.
 xf86-input-keyboard:
-xf86-input-keyboard: xf86-input-keyboard is part of X11.
 xf86-input-keyboard:
-xf86-input-keyboard: For more information about the X.Org Foundation (the providers of the
-xf86-input-keyboard: X.Org implementation of the X Window System), see their website:
 xf86-input-keyboard:
-xf86-input-keyboard: http://www.x.org
 xf86-input-keyboard:
 xf86-input-keyboard:
 xf86-input-keyboard:
diff --git a/source/x/x11/slack-desc/xf86-input-magellan b/source/x/x11/slack-desc/xf86-input-magellan
deleted file mode 100644
index 70ef4382..00000000
--- a/source/x/x11/slack-desc/xf86-input-magellan
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------------|
-xf86-input-magellan: xf86-input-magellan
-xf86-input-magellan:
-xf86-input-magellan: xf86-input-magellan is part of X11.
-xf86-input-magellan:
-xf86-input-magellan: For more information about the X.Org Foundation (the providers of the
-xf86-input-magellan: X.Org implementation of the X Window System), see their website:
-xf86-input-magellan:
-xf86-input-magellan: http://www.x.org
-xf86-input-magellan:
-xf86-input-magellan:
-xf86-input-magellan:
diff --git a/source/x/x11/slack-desc/xf86-input-magictouch b/source/x/x11/slack-desc/xf86-input-magictouch
deleted file mode 100644
index 72d02f52..00000000
--- a/source/x/x11/slack-desc/xf86-input-magictouch
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                     |-----handy-ruler------------------------------------------------------|
-xf86-input-magictouch: xf86-input-magictouch
-xf86-input-magictouch:
-xf86-input-magictouch: xf86-input-magictouch is part of X11.
-xf86-input-magictouch:
-xf86-input-magictouch: For more information about the X.Org Foundation (the providers of the
-xf86-input-magictouch: X.Org implementation of the X Window System), see their website:
-xf86-input-magictouch:
-xf86-input-magictouch: http://www.x.org
-xf86-input-magictouch:
-xf86-input-magictouch:
-xf86-input-magictouch:
diff --git a/source/x/x11/slack-desc/xf86-input-microtouch b/source/x/x11/slack-desc/xf86-input-microtouch
deleted file mode 100644
index 412cb01a..00000000
--- a/source/x/x11/slack-desc/xf86-input-microtouch
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                     |-----handy-ruler------------------------------------------------------|
-xf86-input-microtouch: xf86-input-microtouch
-xf86-input-microtouch:
-xf86-input-microtouch: xf86-input-microtouch is part of X11.
-xf86-input-microtouch:
-xf86-input-microtouch: For more information about the X.Org Foundation (the providers of the
-xf86-input-microtouch: X.Org implementation of the X Window System), see their website:
-xf86-input-microtouch:
-xf86-input-microtouch: http://www.x.org
-xf86-input-microtouch:
-xf86-input-microtouch:
-xf86-input-microtouch:
diff --git a/source/x/x11/slack-desc/xf86-input-mouse b/source/x/x11/slack-desc/xf86-input-mouse
index 5ce1494d..73bd88af 100644
--- a/source/x/x11/slack-desc/xf86-input-mouse
+++ b/source/x/x11/slack-desc/xf86-input-mouse
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-input-mouse: xf86-input-mouse
+xf86-input-mouse: xf86-input-mouse (Mouse Support for X)
+xf86-input-mouse:
+xf86-input-mouse: This is the non-evdev mouse driver for X.  Most Linux systems should
+xf86-input-mouse: be using the evdev driver to handle input devices such as keyboards
+xf86-input-mouse: and mice, but this driver may be useful as a fallback.
 xf86-input-mouse:
-xf86-input-mouse: xf86-input-mouse is part of X11.
 xf86-input-mouse:
-xf86-input-mouse: For more information about the X.Org Foundation (the providers of the
-xf86-input-mouse: X.Org implementation of the X Window System), see their website:
 xf86-input-mouse:
-xf86-input-mouse: http://www.x.org
 xf86-input-mouse:
 xf86-input-mouse:
 xf86-input-mouse:
diff --git a/source/x/x11/slack-desc/xf86-input-mutouch b/source/x/x11/slack-desc/xf86-input-mutouch
deleted file mode 100644
index 7c8c7f83..00000000
--- a/source/x/x11/slack-desc/xf86-input-mutouch
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-mutouch: xf86-input-mutouch
-xf86-input-mutouch:
-xf86-input-mutouch: xf86-input-mutouch is part of X11.
-xf86-input-mutouch:
-xf86-input-mutouch: For more information about the X.Org Foundation (the providers of the
-xf86-input-mutouch: X.Org implementation of the X Window System), see their website:
-xf86-input-mutouch:
-xf86-input-mutouch: http://www.x.org
-xf86-input-mutouch:
-xf86-input-mutouch:
-xf86-input-mutouch:
diff --git a/source/x/x11/slack-desc/xf86-input-palmax b/source/x/x11/slack-desc/xf86-input-palmax
deleted file mode 100644
index 73328d76..00000000
--- a/source/x/x11/slack-desc/xf86-input-palmax
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-input-palmax: xf86-input-palmax
-xf86-input-palmax:
-xf86-input-palmax: xf86-input-palmax is part of X11.
-xf86-input-palmax:
-xf86-input-palmax: For more information about the X.Org Foundation (the providers of the
-xf86-input-palmax: X.Org implementation of the X Window System), see their website:
-xf86-input-palmax:
-xf86-input-palmax: http://www.x.org
-xf86-input-palmax:
-xf86-input-palmax:
-xf86-input-palmax:
diff --git a/source/x/x11/slack-desc/xf86-input-penmount b/source/x/x11/slack-desc/xf86-input-penmount
index ca7e48b8..94218788 100644
--- a/source/x/x11/slack-desc/xf86-input-penmount
+++ b/source/x/x11/slack-desc/xf86-input-penmount
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                    |-----handy-ruler------------------------------------------------------|
-xf86-input-penmount: xf86-input-penmount
+xf86-input-penmount: xf86-input-penmount (PenMount input driver for the Xorg X server)
 xf86-input-penmount:
 xf86-input-penmount: xf86-input-penmount is part of X11.
 xf86-input-penmount:
diff --git a/source/x/x11/slack-desc/xf86-input-spaceorb b/source/x/x11/slack-desc/xf86-input-spaceorb
deleted file mode 100644
index b127b895..00000000
--- a/source/x/x11/slack-desc/xf86-input-spaceorb
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------------|
-xf86-input-spaceorb: xf86-input-spaceorb
-xf86-input-spaceorb:
-xf86-input-spaceorb: xf86-input-spaceorb is part of X11.
-xf86-input-spaceorb:
-xf86-input-spaceorb: For more information about the X.Org Foundation (the providers of the
-xf86-input-spaceorb: X.Org implementation of the X Window System), see their website:
-xf86-input-spaceorb:
-xf86-input-spaceorb: http://www.x.org
-xf86-input-spaceorb:
-xf86-input-spaceorb:
-xf86-input-spaceorb:
diff --git a/source/x/x11/slack-desc/xf86-input-summa b/source/x/x11/slack-desc/xf86-input-summa
deleted file mode 100644
index c69177bc..00000000
--- a/source/x/x11/slack-desc/xf86-input-summa
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-xf86-input-summa: xf86-input-summa
-xf86-input-summa:
-xf86-input-summa: xf86-input-summa is part of X11.
-xf86-input-summa:
-xf86-input-summa: For more information about the X.Org Foundation (the providers of the
-xf86-input-summa: X.Org implementation of the X Window System), see their website:
-xf86-input-summa:
-xf86-input-summa: http://www.x.org
-xf86-input-summa:
-xf86-input-summa:
-xf86-input-summa:
diff --git a/source/x/x11/slack-desc/xf86-input-synaptics b/source/x/x11/slack-desc/xf86-input-synaptics
index 20858404..1425e129 100644
--- a/source/x/x11/slack-desc/xf86-input-synaptics
+++ b/source/x/x11/slack-desc/xf86-input-synaptics
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-xf86-input-synaptics: xf86-input-synaptics
+xf86-input-synaptics: xf86-input-synaptics (Synaptics touchpad driver for X.Org)
 xf86-input-synaptics:
 xf86-input-synaptics: xf86-input-synaptics is part of X11.
 xf86-input-synaptics:
diff --git a/source/x/x11/slack-desc/xf86-input-tek4957 b/source/x/x11/slack-desc/xf86-input-tek4957
deleted file mode 100644
index 2e0a13ff..00000000
--- a/source/x/x11/slack-desc/xf86-input-tek4957
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-tek4957: xf86-input-tek4957
-xf86-input-tek4957:
-xf86-input-tek4957: xf86-input-tek4957 is part of X11.
-xf86-input-tek4957:
-xf86-input-tek4957: For more information about the X.Org Foundation (the providers of the
-xf86-input-tek4957: X.Org implementation of the X Window System), see their website:
-xf86-input-tek4957:
-xf86-input-tek4957: http://www.x.org
-xf86-input-tek4957:
-xf86-input-tek4957:
-xf86-input-tek4957:
diff --git a/source/x/x11/slack-desc/xf86-input-ur98 b/source/x/x11/slack-desc/xf86-input-ur98
deleted file mode 100644
index 66680d8c..00000000
--- a/source/x/x11/slack-desc/xf86-input-ur98
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-xf86-input-ur98: xf86-input-ur98
-xf86-input-ur98:
-xf86-input-ur98: xf86-input-ur98 is part of X11.
-xf86-input-ur98:
-xf86-input-ur98: For more information about the X.Org Foundation (the providers of the
-xf86-input-ur98: X.Org implementation of the X Window System), see their website:
-xf86-input-ur98:
-xf86-input-ur98: http://www.x.org
-xf86-input-ur98:
-xf86-input-ur98:
-xf86-input-ur98:
diff --git a/source/x/x11/slack-desc/xf86-input-vmmouse b/source/x/x11/slack-desc/xf86-input-vmmouse
index 640cc71a..d5638965 100644
--- a/source/x/x11/slack-desc/xf86-input-vmmouse
+++ b/source/x/x11/slack-desc/xf86-input-vmmouse
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-xf86-input-vmmouse: xf86-input-vmmouse
+xf86-input-vmmouse: xf86-input-vmmouse (support for VMWare's VMMouse guest mouse device)
 xf86-input-vmmouse:
 xf86-input-vmmouse: xf86-input-vmmouse is part of X11.
 xf86-input-vmmouse:
diff --git a/source/x/x11/slack-desc/xf86-input-void b/source/x/x11/slack-desc/xf86-input-void
index 889017af..ef38f7d5 100644
--- a/source/x/x11/slack-desc/xf86-input-void
+++ b/source/x/x11/slack-desc/xf86-input-void
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-input-void: xf86-input-void
+xf86-input-void: xf86-input-void (null input driver for Xorg server)
 xf86-input-void:
 xf86-input-void: xf86-input-void is part of X11.
 xf86-input-void:
diff --git a/source/x/x11/slack-desc/xf86-input-wacom b/source/x/x11/slack-desc/xf86-input-wacom
index 88f68c1d..86f4ca62 100644
--- a/source/x/x11/slack-desc/xf86-input-wacom
+++ b/source/x/x11/slack-desc/xf86-input-wacom
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-input-wacom: xf86-input-wacom
+xf86-input-wacom: xf86-input-wacom (driver for Wacom tablets)
 xf86-input-wacom:
-xf86-input-wacom: xf86-input-wacom is part of X11.
+xf86-input-wacom: This package provides the X.Org X11 driver for Wacom and Wacom-like
+xf86-input-wacom: tablets.  It obsoletes the linuxwacom driver and supports X server
+xf86-input-wacom: versions 1.7 and higher. Server versions lower than 1.7 may be
+xf86-input-wacom: supported by this driver, but users are encouraged to use the old
+xf86-input-wacom: linuxwacom driver instead.
 xf86-input-wacom:
-xf86-input-wacom: For more information about the X.Org Foundation (the providers of the
-xf86-input-wacom: X.Org implementation of the X Window System), see their website:
-xf86-input-wacom:
-xf86-input-wacom: http://www.x.org
 xf86-input-wacom:
 xf86-input-wacom:
 xf86-input-wacom:
diff --git a/source/x/x11/slack-desc/xf86-video-apm b/source/x/x11/slack-desc/xf86-video-apm
index b433ed1d..2ee130c9 100644
--- a/source/x/x11/slack-desc/xf86-video-apm
+++ b/source/x/x11/slack-desc/xf86-video-apm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-apm: xf86-video-apm
+xf86-video-apm: xf86-video-apm (driver for Alliance Promotion graphics chipsets)
 xf86-video-apm:
 xf86-video-apm: xf86-video-apm is part of X11.
 xf86-video-apm:
diff --git a/source/x/x11/slack-desc/xf86-video-ark b/source/x/x11/slack-desc/xf86-video-ark
index 20abb224..eba356f7 100644
--- a/source/x/x11/slack-desc/xf86-video-ark
+++ b/source/x/x11/slack-desc/xf86-video-ark
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-ark: xf86-video-ark
+xf86-video-ark: xf86-video-ark (Ark Logic video driver for Xorg X server)
 xf86-video-ark:
 xf86-video-ark: xf86-video-ark is part of X11.
 xf86-video-ark:
diff --git a/source/x/x11/slack-desc/xf86-video-ast b/source/x/x11/slack-desc/xf86-video-ast
index 8861724b..57efd5df 100644
--- a/source/x/x11/slack-desc/xf86-video-ast
+++ b/source/x/x11/slack-desc/xf86-video-ast
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-ast: xf86-video-ast
+xf86-video-ast: xf86-video-ast (ASpeed Technologies graphics driver for Xorg X server)
 xf86-video-ast:
 xf86-video-ast: xf86-video-ast is part of X11.
 xf86-video-ast:
diff --git a/source/x/x11/slack-desc/xf86-video-ati b/source/x/x11/slack-desc/xf86-video-ati
index b6847e1d..7387c43c 100644
--- a/source/x/x11/slack-desc/xf86-video-ati
+++ b/source/x/x11/slack-desc/xf86-video-ati
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-ati: xf86-video-ati
+xf86-video-ati: xf86-video-ati (ATI Radeon video driver for the Xorg X server)
 xf86-video-ati:
 xf86-video-ati: xf86-video-ati is part of X11.
 xf86-video-ati:
diff --git a/source/x/x11/slack-desc/xf86-video-chips b/source/x/x11/slack-desc/xf86-video-chips
index 2422bc20..f615b79c 100644
--- a/source/x/x11/slack-desc/xf86-video-chips
+++ b/source/x/x11/slack-desc/xf86-video-chips
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-chips: xf86-video-chips
+xf86-video-chips: xf86-video-chips (Chips and Technologies video driver for Xorg)
 xf86-video-chips:
 xf86-video-chips: xf86-video-chips is part of X11.
 xf86-video-chips:
diff --git a/source/x/x11/slack-desc/xf86-video-cirrus b/source/x/x11/slack-desc/xf86-video-cirrus
index f7188813..ef65ecc2 100644
--- a/source/x/x11/slack-desc/xf86-video-cirrus
+++ b/source/x/x11/slack-desc/xf86-video-cirrus
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-cirrus: xf86-video-cirrus
+xf86-video-cirrus: xf86-video-cirrus (Cirrus Logic video driver for the Xorg X server)
 xf86-video-cirrus:
 xf86-video-cirrus: xf86-video-cirrus is part of X11.
 xf86-video-cirrus:
diff --git a/source/x/x11/slack-desc/xf86-video-cyrix b/source/x/x11/slack-desc/xf86-video-cyrix
deleted file mode 100644
index aebae006..00000000
--- a/source/x/x11/slack-desc/xf86-video-cyrix
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-xf86-video-cyrix: xf86-video-cyrix
-xf86-video-cyrix:
-xf86-video-cyrix: xf86-video-cyrix is part of X11.
-xf86-video-cyrix:
-xf86-video-cyrix: For more information about the X.Org Foundation (the providers of the
-xf86-video-cyrix: X.Org implementation of the X Window System), see their website:
-xf86-video-cyrix:
-xf86-video-cyrix: http://www.x.org
-xf86-video-cyrix:
-xf86-video-cyrix:
-xf86-video-cyrix:
diff --git a/source/x/x11/slack-desc/xf86-video-dummy b/source/x/x11/slack-desc/xf86-video-dummy
index 389e9e3b..98cac335 100644
--- a/source/x/x11/slack-desc/xf86-video-dummy
+++ b/source/x/x11/slack-desc/xf86-video-dummy
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-dummy: xf86-video-dummy
+xf86-video-dummy: xf86-video-dummy (virtual frame buffer driver for the Xorg X server)
 xf86-video-dummy:
 xf86-video-dummy: xf86-video-dummy is part of X11.
 xf86-video-dummy:
diff --git a/source/x/x11/slack-desc/xf86-video-fbdev b/source/x/x11/slack-desc/xf86-video-fbdev
index ba6e4a6b..08a636a1 100644
--- a/source/x/x11/slack-desc/xf86-video-fbdev
+++ b/source/x/x11/slack-desc/xf86-video-fbdev
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-fbdev: xf86-video-fbdev
+xf86-video-fbdev: xf86-video-fbdev (X.Org generic framebuffer video driver)
+xf86-video-fbdev:
+xf86-video-fbdev: xf86-video-fbdev is the generic framebuffer video driver for X.Org,
+xf86-video-fbdev: designed to draw into a video framebuffer provided by the
+xf86-video-fbdev: underlying operating system.
 xf86-video-fbdev:
-xf86-video-fbdev: xf86-video-fbdev is part of X11.
 xf86-video-fbdev:
-xf86-video-fbdev: For more information about the X.Org Foundation (the providers of the
-xf86-video-fbdev: X.Org implementation of the X Window System), see their website:
 xf86-video-fbdev:
-xf86-video-fbdev: http://www.x.org
 xf86-video-fbdev:
 xf86-video-fbdev:
 xf86-video-fbdev:
diff --git a/source/x/x11/slack-desc/xf86-video-geode b/source/x/x11/slack-desc/xf86-video-geode
index f9658047..003286bf 100644
--- a/source/x/x11/slack-desc/xf86-video-geode
+++ b/source/x/x11/slack-desc/xf86-video-geode
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-geode: xf86-video-geode (AMD Geode GX and LX video driver)
+xf86-video-geode: xf86-video-geode (AMD Geode GX and LX graphics driver for X.org)
 xf86-video-geode:
 xf86-video-geode: xf86-video-geode is part of X11.
 xf86-video-geode:
diff --git a/source/x/x11/slack-desc/xf86-video-glint b/source/x/x11/slack-desc/xf86-video-glint
index 32fb11c4..7e4eeae0 100644
--- a/source/x/x11/slack-desc/xf86-video-glint
+++ b/source/x/x11/slack-desc/xf86-video-glint
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-glint: xf86-video-glint
+xf86-video-glint: xf86-video-glint (GLINT/Permedia video driver for the Xorg X server)
 xf86-video-glint:
 xf86-video-glint: xf86-video-glint is part of X11.
 xf86-video-glint:
diff --git a/source/x/x11/slack-desc/xf86-video-i128 b/source/x/x11/slack-desc/xf86-video-i128
index bab53780..bbf2aa00 100644
--- a/source/x/x11/slack-desc/xf86-video-i128
+++ b/source/x/x11/slack-desc/xf86-video-i128
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-video-i128: xf86-video-i128
+xf86-video-i128: xf86-video-i128 (Number Nine I128 video driver for the Xorg X server)
 xf86-video-i128:
 xf86-video-i128: xf86-video-i128 is part of X11.
 xf86-video-i128:
diff --git a/source/x/x11/slack-desc/xf86-video-i740 b/source/x/x11/slack-desc/xf86-video-i740
index e31e5ad4..3b61c6aa 100644
--- a/source/x/x11/slack-desc/xf86-video-i740
+++ b/source/x/x11/slack-desc/xf86-video-i740
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-video-i740: xf86-video-i740
+xf86-video-i740: xf86-video-i740 (Intel i740 video driver for the Xorg X server)
 xf86-video-i740:
 xf86-video-i740: xf86-video-i740 is part of X11.
 xf86-video-i740:
diff --git a/source/x/x11/slack-desc/xf86-video-i810 b/source/x/x11/slack-desc/xf86-video-i810
deleted file mode 100644
index 99eb5b47..00000000
--- a/source/x/x11/slack-desc/xf86-video-i810
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-xf86-video-i810: xf86-video-i810
-xf86-video-i810:
-xf86-video-i810: xf86-video-i810 is part of X11.
-xf86-video-i810:
-xf86-video-i810: For more information about the X.Org Foundation (the providers of the
-xf86-video-i810: X.Org implementation of the X Window System), see their website:
-xf86-video-i810:
-xf86-video-i810: http://www.x.org
-xf86-video-i810:
-xf86-video-i810:
-xf86-video-i810:
diff --git a/source/x/x11/slack-desc/xf86-video-impact b/source/x/x11/slack-desc/xf86-video-impact
deleted file mode 100644
index 9990fc3b..00000000
--- a/source/x/x11/slack-desc/xf86-video-impact
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-impact: xf86-video-impact
-xf86-video-impact:
-xf86-video-impact: xf86-video-impact is part of X11.
-xf86-video-impact:
-xf86-video-impact: For more information about the X.Org Foundation (the providers of the
-xf86-video-impact: X.Org implementation of the X Window System), see their website:
-xf86-video-impact:
-xf86-video-impact: http://www.x.org
-xf86-video-impact:
-xf86-video-impact:
-xf86-video-impact:
diff --git a/source/x/x11/slack-desc/xf86-video-imstt b/source/x/x11/slack-desc/xf86-video-imstt
deleted file mode 100644
index 71614b67..00000000
--- a/source/x/x11/slack-desc/xf86-video-imstt
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-xf86-video-imstt: xf86-video-imstt
-xf86-video-imstt:
-xf86-video-imstt: xf86-video-imstt is part of X11.
-xf86-video-imstt:
-xf86-video-imstt: For more information about the X.Org Foundation (the providers of the
-xf86-video-imstt: X.Org implementation of the X Window System), see their website:
-xf86-video-imstt:
-xf86-video-imstt: http://www.x.org
-xf86-video-imstt:
-xf86-video-imstt:
-xf86-video-imstt:
diff --git a/source/x/x11/slack-desc/xf86-video-intel b/source/x/x11/slack-desc/xf86-video-intel
index 55be1e31..c51417a7 100644
--- a/source/x/x11/slack-desc/xf86-video-intel
+++ b/source/x/x11/slack-desc/xf86-video-intel
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-intel: xf86-video-intel
+xf86-video-intel: xf86-video-intel (X.org graphics driver for Intel graphics)
 xf86-video-intel:
 xf86-video-intel: xf86-video-intel is part of X11.
 xf86-video-intel:
diff --git a/source/x/x11/slack-desc/xf86-video-mach64 b/source/x/x11/slack-desc/xf86-video-mach64
index ae70d099..46c7f7f6 100644
--- a/source/x/x11/slack-desc/xf86-video-mach64
+++ b/source/x/x11/slack-desc/xf86-video-mach64
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-mach64: xf86-video-mach64
+xf86-video-mach64: xf86-video-mach64 (ATI Mach64 driver for the Xorg X server)
 xf86-video-mach64:
 xf86-video-mach64: xf86-video-mach64 is part of X11.
 xf86-video-mach64:
diff --git a/source/x/x11/slack-desc/xf86-video-mga b/source/x/x11/slack-desc/xf86-video-mga
index e0df509f..34e34e61 100644
--- a/source/x/x11/slack-desc/xf86-video-mga
+++ b/source/x/x11/slack-desc/xf86-video-mga
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-mga: xf86-video-mga
+xf86-video-mga: xf86-video-mga (Matrox video driver for the Xorg X server)
 xf86-video-mga:
 xf86-video-mga: xf86-video-mga is part of X11.
 xf86-video-mga:
diff --git a/source/x/x11/slack-desc/xf86-video-modesetting b/source/x/x11/slack-desc/xf86-video-modesetting
new file mode 100644
index 00000000..d6ffe28e
--- /dev/null
+++ b/source/x/x11/slack-desc/xf86-video-modesetting
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                      |-----handy-ruler------------------------------------------------------|
+xf86-video-modesetting: xf86-video-modesetting (X.org modesetting fallback driver)
+xf86-video-modesetting:
+xf86-video-modesetting: xf86-video-modesetting is part of X11.
+xf86-video-modesetting:
+xf86-video-modesetting: For more information about the X.Org Foundation (the providers of the
+xf86-video-modesetting: X.Org implementation of the X Window System), see their website:
+xf86-video-modesetting:
+xf86-video-modesetting: http://www.x.org
+xf86-video-modesetting:
+xf86-video-modesetting:
+xf86-video-modesetting:
diff --git a/source/x/x11/slack-desc/xf86-video-neomagic b/source/x/x11/slack-desc/xf86-video-neomagic
index 89676c27..862a4306 100644
--- a/source/x/x11/slack-desc/xf86-video-neomagic
+++ b/source/x/x11/slack-desc/xf86-video-neomagic
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                    |-----handy-ruler------------------------------------------------------|
-xf86-video-neomagic: xf86-video-neomagic
+xf86-video-neomagic: xf86-video-neomagic (NeoMagic video driver for the Xorg X server)
 xf86-video-neomagic:
 xf86-video-neomagic: xf86-video-neomagic is part of X11.
 xf86-video-neomagic:
diff --git a/source/x/x11/slack-desc/xf86-video-newport b/source/x/x11/slack-desc/xf86-video-newport
deleted file mode 100644
index 18d0daf9..00000000
--- a/source/x/x11/slack-desc/xf86-video-newport
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-video-newport: xf86-video-newport
-xf86-video-newport:
-xf86-video-newport: xf86-video-newport is part of X11.
-xf86-video-newport:
-xf86-video-newport: For more information about the X.Org Foundation (the providers of the
-xf86-video-newport: X.Org implementation of the X Window System), see their website:
-xf86-video-newport:
-xf86-video-newport: http://www.x.org
-xf86-video-newport:
-xf86-video-newport:
-xf86-video-newport:
diff --git a/source/x/x11/slack-desc/xf86-video-nouveau b/source/x/x11/slack-desc/xf86-video-nouveau
index 8697a60e..ef207622 100644
--- a/source/x/x11/slack-desc/xf86-video-nouveau
+++ b/source/x/x11/slack-desc/xf86-video-nouveau
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-xf86-video-nouveau: xf86-video-nouveau
+xf86-video-nouveau: xf86-video-nouveau (accelerated open source driver for nVidia cards)
 xf86-video-nouveau:
 xf86-video-nouveau: xf86-video-nouveau is part of X11.
 xf86-video-nouveau:
diff --git a/source/x/x11/slack-desc/xf86-video-nsc b/source/x/x11/slack-desc/xf86-video-nsc
deleted file mode 100644
index 1081a9f5..00000000
--- a/source/x/x11/slack-desc/xf86-video-nsc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-xf86-video-nsc: xf86-video-nsc
-xf86-video-nsc:
-xf86-video-nsc: xf86-video-nsc is part of X11.
-xf86-video-nsc:
-xf86-video-nsc: For more information about the X.Org Foundation (the providers of the
-xf86-video-nsc: X.Org implementation of the X Window System), see their website:
-xf86-video-nsc:
-xf86-video-nsc: http://www.x.org
-xf86-video-nsc:
-xf86-video-nsc:
-xf86-video-nsc:
diff --git a/source/x/x11/slack-desc/xf86-video-nv b/source/x/x11/slack-desc/xf86-video-nv
index dfed5106..cd866957 100644
--- a/source/x/x11/slack-desc/xf86-video-nv
+++ b/source/x/x11/slack-desc/xf86-video-nv
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-xf86-video-nv: xf86-video-nv
+xf86-video-nv: xf86-video-nv (old NVIDIA video driver for the Xorg X server)
 xf86-video-nv:
 xf86-video-nv: xf86-video-nv is part of X11.
 xf86-video-nv:
diff --git a/source/x/x11/slack-desc/xf86-video-openchrome b/source/x/x11/slack-desc/xf86-video-openchrome
index 263de315..32e4c312 100644
--- a/source/x/x11/slack-desc/xf86-video-openchrome
+++ b/source/x/x11/slack-desc/xf86-video-openchrome
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                      |-----handy-ruler------------------------------------------------------|
-xf86-video-openchrome: xf86-video-openchrome
+xf86-video-openchrome: xf86-video-openchrome (VIA video driver for the Xorg X server)
 xf86-video-openchrome:
 xf86-video-openchrome: xf86-video-openchrome is part of X11.
 xf86-video-openchrome:
diff --git a/source/x/x11/slack-desc/xf86-video-qxl b/source/x/x11/slack-desc/xf86-video-qxl
new file mode 100644
index 00000000..e5eae0ce
--- /dev/null
+++ b/source/x/x11/slack-desc/xf86-video-qxl
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xf86-video-qxl: xf86-video-qxl (driver for the spice virtual GPU)
+xf86-video-qxl:
+xf86-video-qxl: QXL is a driver for the spice virtual GPU.
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
+xf86-video-qxl:
diff --git a/source/x/x11/slack-desc/xf86-video-r128 b/source/x/x11/slack-desc/xf86-video-r128
index 6a5807bc..ae700aa9 100644
--- a/source/x/x11/slack-desc/xf86-video-r128
+++ b/source/x/x11/slack-desc/xf86-video-r128
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-video-r128: xf86-video-r128
+xf86-video-r128: xf86-video-r128 (ATI Rage 128 video driver for the Xorg X server)
 xf86-video-r128:
 xf86-video-r128: xf86-video-r128 is part of X11.
 xf86-video-r128:
diff --git a/source/x/x11/slack-desc/xf86-video-radeonhd b/source/x/x11/slack-desc/xf86-video-radeonhd
deleted file mode 100644
index ce2e7265..00000000
--- a/source/x/x11/slack-desc/xf86-video-radeonhd
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------------|
-xf86-video-radeonhd: xf86-video-radeonhd (driver for AMD GPG (ATI) R5xx/R6xx chipsets)
-xf86-video-radeonhd:
-xf86-video-radeonhd: xf86-video-radeonhd is part of X11.
-xf86-video-radeonhd:
-xf86-video-radeonhd: For more information about the X.Org Foundation (the providers of the
-xf86-video-radeonhd: X.Org implementation of the X Window System), see their website:
-xf86-video-radeonhd:
-xf86-video-radeonhd: http://www.x.org
-xf86-video-radeonhd:
-xf86-video-radeonhd:
-xf86-video-radeonhd:
diff --git a/source/x/x11/slack-desc/xf86-video-rendition b/source/x/x11/slack-desc/xf86-video-rendition
index 99561b3a..a4c4dac5 100644
--- a/source/x/x11/slack-desc/xf86-video-rendition
+++ b/source/x/x11/slack-desc/xf86-video-rendition
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                     |-----handy-ruler------------------------------------------------------|
-xf86-video-rendition: xf86-video-rendition
+xf86-video-rendition: xf86-video-rendition (Rendition video driver for the Xorg X server)
 xf86-video-rendition:
 xf86-video-rendition: xf86-video-rendition is part of X11.
 xf86-video-rendition:
diff --git a/source/x/x11/slack-desc/xf86-video-s3 b/source/x/x11/slack-desc/xf86-video-s3
index f91fd6e9..960fd1f0 100644
--- a/source/x/x11/slack-desc/xf86-video-s3
+++ b/source/x/x11/slack-desc/xf86-video-s3
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-xf86-video-s3: xf86-video-s3
+xf86-video-s3: xf86-video-s3 (Xorg driver for S3 chipsets other than ViRGE or Savage)
 xf86-video-s3:
 xf86-video-s3: xf86-video-s3 is part of X11.
 xf86-video-s3:
diff --git a/source/x/x11/slack-desc/xf86-video-s3virge b/source/x/x11/slack-desc/xf86-video-s3virge
index 52fe0a34..87042f44 100644
--- a/source/x/x11/slack-desc/xf86-video-s3virge
+++ b/source/x/x11/slack-desc/xf86-video-s3virge
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-xf86-video-s3virge: xf86-video-s3virge
+xf86-video-s3virge: xf86-video-s3virge (S3 ViRGE video driver for the Xorg X server)
 xf86-video-s3virge:
 xf86-video-s3virge: xf86-video-s3virge is part of X11.
 xf86-video-s3virge:
diff --git a/source/x/x11/slack-desc/xf86-video-savage b/source/x/x11/slack-desc/xf86-video-savage
index f31d670c..b789b634 100644
--- a/source/x/x11/slack-desc/xf86-video-savage
+++ b/source/x/x11/slack-desc/xf86-video-savage
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-savage: xf86-video-savage
+xf86-video-savage: xf86-video-savage (S3 Savage video driver for the Xorg X server)
 xf86-video-savage:
 xf86-video-savage: xf86-video-savage is part of X11.
 xf86-video-savage:
diff --git a/source/x/x11/slack-desc/xf86-video-siliconmotion b/source/x/x11/slack-desc/xf86-video-siliconmotion
index 97a28f01..3a50a9a9 100644
--- a/source/x/x11/slack-desc/xf86-video-siliconmotion
+++ b/source/x/x11/slack-desc/xf86-video-siliconmotion
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                         |-----handy-ruler------------------------------------------------------|
-xf86-video-siliconmotion: xf86-video-siliconmotion
+xf86-video-siliconmotion: xf86-video-siliconmotion (Silicon Motion video driver for Xorg)
 xf86-video-siliconmotion:
 xf86-video-siliconmotion: xf86-video-siliconmotion is part of X11.
 xf86-video-siliconmotion:
diff --git a/source/x/x11/slack-desc/xf86-video-sis b/source/x/x11/slack-desc/xf86-video-sis
index d0261754..f08c5495 100644
--- a/source/x/x11/slack-desc/xf86-video-sis
+++ b/source/x/x11/slack-desc/xf86-video-sis
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-sis: xf86-video-sis
+xf86-video-sis: xf86-video-sis (SiS and XGI video driver for the Xorg X server)
 xf86-video-sis:
 xf86-video-sis: xf86-video-sis is part of X11.
 xf86-video-sis:
diff --git a/source/x/x11/slack-desc/xf86-video-sisusb b/source/x/x11/slack-desc/xf86-video-sisusb
index 9ab8bcbb..bda16ac5 100644
--- a/source/x/x11/slack-desc/xf86-video-sisusb
+++ b/source/x/x11/slack-desc/xf86-video-sisusb
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-sisusb: xf86-video-sisusb
+xf86-video-sisusb: xf86-video-sisusb (SiS Net2280-based USB video driver for Xorg)
 xf86-video-sisusb:
 xf86-video-sisusb: xf86-video-sisusb is part of X11.
 xf86-video-sisusb:
diff --git a/source/x/x11/slack-desc/xf86-video-sunbw2 b/source/x/x11/slack-desc/xf86-video-sunbw2
deleted file mode 100644
index f432ae42..00000000
--- a/source/x/x11/slack-desc/xf86-video-sunbw2
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-sunbw2: xf86-video-sunbw2
-xf86-video-sunbw2:
-xf86-video-sunbw2: xf86-video-sunbw2 is part of X11.
-xf86-video-sunbw2:
-xf86-video-sunbw2: For more information about the X.Org Foundation (the providers of the
-xf86-video-sunbw2: X.Org implementation of the X Window System), see their website:
-xf86-video-sunbw2:
-xf86-video-sunbw2: http://www.x.org
-xf86-video-sunbw2:
-xf86-video-sunbw2:
-xf86-video-sunbw2:
diff --git a/source/x/x11/slack-desc/xf86-video-suncg14 b/source/x/x11/slack-desc/xf86-video-suncg14
deleted file mode 100644
index de038ed1..00000000
--- a/source/x/x11/slack-desc/xf86-video-suncg14
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-video-suncg14: xf86-video-suncg14
-xf86-video-suncg14:
-xf86-video-suncg14: xf86-video-suncg14 is part of X11.
-xf86-video-suncg14:
-xf86-video-suncg14: For more information about the X.Org Foundation (the providers of the
-xf86-video-suncg14: X.Org implementation of the X Window System), see their website:
-xf86-video-suncg14:
-xf86-video-suncg14: http://www.x.org
-xf86-video-suncg14:
-xf86-video-suncg14:
-xf86-video-suncg14:
diff --git a/source/x/x11/slack-desc/xf86-video-suncg3 b/source/x/x11/slack-desc/xf86-video-suncg3
deleted file mode 100644
index c4b70a91..00000000
--- a/source/x/x11/slack-desc/xf86-video-suncg3
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-suncg3: xf86-video-suncg3
-xf86-video-suncg3:
-xf86-video-suncg3: xf86-video-suncg3 is part of X11.
-xf86-video-suncg3:
-xf86-video-suncg3: For more information about the X.Org Foundation (the providers of the
-xf86-video-suncg3: X.Org implementation of the X Window System), see their website:
-xf86-video-suncg3:
-xf86-video-suncg3: http://www.x.org
-xf86-video-suncg3:
-xf86-video-suncg3:
-xf86-video-suncg3:
diff --git a/source/x/x11/slack-desc/xf86-video-suncg6 b/source/x/x11/slack-desc/xf86-video-suncg6
deleted file mode 100644
index e9efb940..00000000
--- a/source/x/x11/slack-desc/xf86-video-suncg6
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-suncg6: xf86-video-suncg6
-xf86-video-suncg6:
-xf86-video-suncg6: xf86-video-suncg6 is part of X11.
-xf86-video-suncg6:
-xf86-video-suncg6: For more information about the X.Org Foundation (the providers of the
-xf86-video-suncg6: X.Org implementation of the X Window System), see their website:
-xf86-video-suncg6:
-xf86-video-suncg6: http://www.x.org
-xf86-video-suncg6:
-xf86-video-suncg6:
-xf86-video-suncg6:
diff --git a/source/x/x11/slack-desc/xf86-video-sunffb b/source/x/x11/slack-desc/xf86-video-sunffb
deleted file mode 100644
index 17400a0e..00000000
--- a/source/x/x11/slack-desc/xf86-video-sunffb
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-sunffb: xf86-video-sunffb
-xf86-video-sunffb:
-xf86-video-sunffb: xf86-video-sunffb is part of X11.
-xf86-video-sunffb:
-xf86-video-sunffb: For more information about the X.Org Foundation (the providers of the
-xf86-video-sunffb: X.Org implementation of the X Window System), see their website:
-xf86-video-sunffb:
-xf86-video-sunffb: http://www.x.org
-xf86-video-sunffb:
-xf86-video-sunffb:
-xf86-video-sunffb:
diff --git a/source/x/x11/slack-desc/xf86-video-sunleo b/source/x/x11/slack-desc/xf86-video-sunleo
deleted file mode 100644
index 03b0c2ea..00000000
--- a/source/x/x11/slack-desc/xf86-video-sunleo
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-sunleo: xf86-video-sunleo
-xf86-video-sunleo:
-xf86-video-sunleo: xf86-video-sunleo is part of X11.
-xf86-video-sunleo:
-xf86-video-sunleo: For more information about the X.Org Foundation (the providers of the
-xf86-video-sunleo: X.Org implementation of the X Window System), see their website:
-xf86-video-sunleo:
-xf86-video-sunleo: http://www.x.org
-xf86-video-sunleo:
-xf86-video-sunleo:
-xf86-video-sunleo:
diff --git a/source/x/x11/slack-desc/xf86-video-suntcx b/source/x/x11/slack-desc/xf86-video-suntcx
deleted file mode 100644
index 800bade3..00000000
--- a/source/x/x11/slack-desc/xf86-video-suntcx
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                 |-----handy-ruler------------------------------------------------------|
-xf86-video-suntcx: xf86-video-suntcx
-xf86-video-suntcx:
-xf86-video-suntcx: xf86-video-suntcx is part of X11.
-xf86-video-suntcx:
-xf86-video-suntcx: For more information about the X.Org Foundation (the providers of the
-xf86-video-suntcx: X.Org implementation of the X Window System), see their website:
-xf86-video-suntcx:
-xf86-video-suntcx: http://www.x.org
-xf86-video-suntcx:
-xf86-video-suntcx:
-xf86-video-suntcx:
diff --git a/source/x/x11/slack-desc/xf86-video-tdfx b/source/x/x11/slack-desc/xf86-video-tdfx
index 8d375baf..dddcaf59 100644
--- a/source/x/x11/slack-desc/xf86-video-tdfx
+++ b/source/x/x11/slack-desc/xf86-video-tdfx
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-video-tdfx: xf86-video-tdfx
+xf86-video-tdfx: xf86-video-tdfx (3Dfx video driver for the Xorg X server)
 xf86-video-tdfx:
 xf86-video-tdfx: xf86-video-tdfx is part of X11.
 xf86-video-tdfx:
diff --git a/source/x/x11/slack-desc/xf86-video-tga b/source/x/x11/slack-desc/xf86-video-tga
index 52a30eb0..fead6cbe 100644
--- a/source/x/x11/slack-desc/xf86-video-tga
+++ b/source/x/x11/slack-desc/xf86-video-tga
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-tga: xf86-video-tga
+xf86-video-tga: xf86-video-tga (DEC21030/TGA video driver for the Xorg X server)
 xf86-video-tga:
 xf86-video-tga: xf86-video-tga is part of X11.
 xf86-video-tga:
diff --git a/source/x/x11/slack-desc/xf86-video-trident b/source/x/x11/slack-desc/xf86-video-trident
index f4b6a570..69197278 100644
--- a/source/x/x11/slack-desc/xf86-video-trident
+++ b/source/x/x11/slack-desc/xf86-video-trident
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-xf86-video-trident: xf86-video-trident
+xf86-video-trident: xf86-video-trident (Trident video driver for the Xorg X server)
 xf86-video-trident:
 xf86-video-trident: xf86-video-trident is part of X11.
 xf86-video-trident:
diff --git a/source/x/x11/slack-desc/xf86-video-tseng b/source/x/x11/slack-desc/xf86-video-tseng
index 3192fe14..8e0a12b4 100644
--- a/source/x/x11/slack-desc/xf86-video-tseng
+++ b/source/x/x11/slack-desc/xf86-video-tseng
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86-video-tseng: xf86-video-tseng
+xf86-video-tseng: xf86-video-tseng (Tseng Labs video driver for the Xorg X server)
 xf86-video-tseng:
 xf86-video-tseng: xf86-video-tseng is part of X11.
 xf86-video-tseng:
diff --git a/source/x/x11/slack-desc/xf86-video-v4l b/source/x/x11/slack-desc/xf86-video-v4l
index 27e7795f..e6e1aab1 100644
--- a/source/x/x11/slack-desc/xf86-video-v4l
+++ b/source/x/x11/slack-desc/xf86-video-v4l
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-v4l: xf86-video-v4l
+xf86-video-v4l: xf86-video-v4l (Video 4 Linux adaptor driver for X)
 xf86-video-v4l:
 xf86-video-v4l: xf86-video-v4l is part of X11.
 xf86-video-v4l:
diff --git a/source/x/x11/slack-desc/xf86-video-vermilion b/source/x/x11/slack-desc/xf86-video-vermilion
deleted file mode 100644
index 2ca79f3e..00000000
--- a/source/x/x11/slack-desc/xf86-video-vermilion
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                    |-----handy-ruler------------------------------------------------------|
-xf86-video-vermilion: xf86-video-vermilion
-xf86-video-vermilion:
-xf86-video-vermilion: xf86-video-vermilion supports the Intel Vermilion Range of chipsets.
-xf86-video-vermilion:
-xf86-video-vermilion: For more information about the X.Org Foundation (the providers of the
-xf86-video-vermilion: X.Org implementation of the X Window System), see their website:
-xf86-video-vermilion:
-xf86-video-vermilion: http://www.x.org
-xf86-video-vermilion:
-xf86-video-vermilion:
-xf86-video-vermilion:
diff --git a/source/x/x11/slack-desc/xf86-video-vesa b/source/x/x11/slack-desc/xf86-video-vesa
index 5a1edcaf..0c7e742d 100644
--- a/source/x/x11/slack-desc/xf86-video-vesa
+++ b/source/x/x11/slack-desc/xf86-video-vesa
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                |-----handy-ruler------------------------------------------------------|
-xf86-video-vesa: xf86-video-vesa
+xf86-video-vesa: xf86-video-vesa (Generic VESA video driver for the Xorg X server)
 xf86-video-vesa:
 xf86-video-vesa: xf86-video-vesa is part of X11.
 xf86-video-vesa:
diff --git a/source/x/x11/slack-desc/xf86-video-vga b/source/x/x11/slack-desc/xf86-video-vga
deleted file mode 100644
index 5a4dde64..00000000
--- a/source/x/x11/slack-desc/xf86-video-vga
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-xf86-video-vga: xf86-video-vga
-xf86-video-vga:
-xf86-video-vga: xf86-video-vga is part of X11.
-xf86-video-vga:
-xf86-video-vga: For more information about the X.Org Foundation (the providers of the
-xf86-video-vga: X.Org implementation of the X Window System), see their website:
-xf86-video-vga:
-xf86-video-vga: http://www.x.org
-xf86-video-vga:
-xf86-video-vga:
-xf86-video-vga:
diff --git a/source/x/x11/slack-desc/xf86-video-via b/source/x/x11/slack-desc/xf86-video-via
deleted file mode 100644
index 90193181..00000000
--- a/source/x/x11/slack-desc/xf86-video-via
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-              |-----handy-ruler------------------------------------------------------|
-xf86-video-via: xf86-video-via
-xf86-video-via:
-xf86-video-via: xf86-video-via is part of X11.
-xf86-video-via:
-xf86-video-via: For more information about the X.Org Foundation (the providers of the
-xf86-video-via: X.Org implementation of the X Window System), see their website:
-xf86-video-via:
-xf86-video-via: http://www.x.org
-xf86-video-via:
-xf86-video-via:
-xf86-video-via:
diff --git a/source/x/x11/slack-desc/xf86-video-vmware b/source/x/x11/slack-desc/xf86-video-vmware
index d3d818b2..7ca2802e 100644
--- a/source/x/x11/slack-desc/xf86-video-vmware
+++ b/source/x/x11/slack-desc/xf86-video-vmware
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-vmware: xf86-video-vmware
+xf86-video-vmware: xf86-video-vmware (VMWare SVGA video driver for the Xorg X server)
 xf86-video-vmware:
 xf86-video-vmware: xf86-video-vmware is part of X11.
 xf86-video-vmware:
diff --git a/source/x/x11/slack-desc/xf86-video-voodoo b/source/x/x11/slack-desc/xf86-video-voodoo
index 5ba59ab2..357315d4 100644
--- a/source/x/x11/slack-desc/xf86-video-voodoo
+++ b/source/x/x11/slack-desc/xf86-video-voodoo
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                  |-----handy-ruler------------------------------------------------------|
-xf86-video-voodoo: xf86-video-voodoo
+xf86-video-voodoo: xf86-video-voodoo (3DFX Voodoo/Voodoo2 video driver for Xorg)
 xf86-video-voodoo:
 xf86-video-voodoo: xf86-video-voodoo is part of X11.
 xf86-video-voodoo:
diff --git a/source/x/x11/slack-desc/xf86-video-wsfb b/source/x/x11/slack-desc/xf86-video-wsfb
deleted file mode 100644
index 0253575e..00000000
--- a/source/x/x11/slack-desc/xf86-video-wsfb
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-               |-----handy-ruler------------------------------------------------------|
-xf86-video-wsfb: xf86-video-wsfb
-xf86-video-wsfb:
-xf86-video-wsfb: xf86-video-wsfb is part of X11.
-xf86-video-wsfb:
-xf86-video-wsfb: For more information about the X.Org Foundation (the providers of the
-xf86-video-wsfb: X.Org implementation of the X Window System), see their website:
-xf86-video-wsfb:
-xf86-video-wsfb: http://www.x.org
-xf86-video-wsfb:
-xf86-video-wsfb:
-xf86-video-wsfb:
diff --git a/source/x/x11/slack-desc/xf86-video-xgi b/source/x/x11/slack-desc/xf86-video-xgi
index a92ec854..1792db1b 100644
--- a/source/x/x11/slack-desc/xf86-video-xgi
+++ b/source/x/x11/slack-desc/xf86-video-xgi
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
               |-----handy-ruler------------------------------------------------------|
-xf86-video-xgi: xf86-video-xgi
+xf86-video-xgi: xf86-video-xgi (XGI video driver for the Xorg X server)
 xf86-video-xgi:
 xf86-video-xgi: xf86-video-xgi is part of X11.
 xf86-video-xgi:
diff --git a/source/x/x11/slack-desc/xf86-video-xgixp b/source/x/x11/slack-desc/xf86-video-xgixp
deleted file mode 100644
index 32aea9fd..00000000
--- a/source/x/x11/slack-desc/xf86-video-xgixp
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-xf86-video-xgixp: xf86-video-xgixp
-xf86-video-xgixp:
-xf86-video-xgixp: xf86-video-xgixp is part of X11.
-xf86-video-xgixp:
-xf86-video-xgixp: For more information about the X.Org Foundation (the providers of the
-xf86-video-xgixp: X.Org implementation of the X Window System), see their website:
-xf86-video-xgixp:
-xf86-video-xgixp: http://www.x.org
-xf86-video-xgixp:
-xf86-video-xgixp:
-xf86-video-xgixp:
diff --git a/source/x/x11/slack-desc/xf86bigfontproto b/source/x/x11/slack-desc/xf86bigfontproto
index d42c5419..d9f1cc2e 100644
--- a/source/x/x11/slack-desc/xf86bigfontproto
+++ b/source/x/x11/slack-desc/xf86bigfontproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86bigfontproto: xf86bigfontproto
+xf86bigfontproto: xf86bigfontproto (X.Org XF86BIGFONT protocol headers)
 xf86bigfontproto:
 xf86bigfontproto: xf86bigfontproto is part of X11.
 xf86bigfontproto:
diff --git a/source/x/x11/slack-desc/xf86dga b/source/x/x11/slack-desc/xf86dga
index 08c928a9..70d189ea 100644
--- a/source/x/x11/slack-desc/xf86dga
+++ b/source/x/x11/slack-desc/xf86dga
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-xf86dga: xf86dga
+xf86dga: xf86dga (simple test client for the XFree86-DGA extension)
 xf86dga:
 xf86dga: xf86dga is part of X11.
 xf86dga:
diff --git a/source/x/x11/slack-desc/xf86dgaproto b/source/x/x11/slack-desc/xf86dgaproto
index c9ca3fc2..cbc21ac6 100644
--- a/source/x/x11/slack-desc/xf86dgaproto
+++ b/source/x/x11/slack-desc/xf86dgaproto
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
             |-----handy-ruler------------------------------------------------------|
-xf86dgaproto: xf86dgaproto
+xf86dgaproto: xf86dgaproto (X.Org XFree86-DGA protocol headers)
+xf86dgaproto:
+xf86dgaproto: xf86dgaproto provides the wire protocol for the XFree86-DGA extension
+xf86dgaproto: in X.Org.  It provides direct, framebuffer-like, graphics access.
+xf86dgaproto:
 xf86dgaproto:
-xf86dgaproto: xf86dgaproto is part of X11.
 xf86dgaproto:
-xf86dgaproto: For more information about the X.Org Foundation (the providers of the
-xf86dgaproto: X.Org implementation of the X Window System), see their website:
 xf86dgaproto:
-xf86dgaproto: http://www.x.org
 xf86dgaproto:
 xf86dgaproto:
 xf86dgaproto:
diff --git a/source/x/x11/slack-desc/xf86driproto b/source/x/x11/slack-desc/xf86driproto
index c327a43b..e9466bde 100644
--- a/source/x/x11/slack-desc/xf86driproto
+++ b/source/x/x11/slack-desc/xf86driproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
             |-----handy-ruler------------------------------------------------------|
-xf86driproto: xf86driproto
+xf86driproto: xf86driproto (C prototypes for XFree86 DRI)
 xf86driproto:
 xf86driproto: xf86driproto is part of X11.
 xf86driproto:
diff --git a/source/x/x11/slack-desc/xf86miscproto b/source/x/x11/slack-desc/xf86miscproto
index 883ef9fe..bf1297b1 100644
--- a/source/x/x11/slack-desc/xf86miscproto
+++ b/source/x/x11/slack-desc/xf86miscproto
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-xf86miscproto: xf86miscproto
+xf86miscproto: xf86miscproto (C prototypes for XFree86-Misc)
 xf86miscproto:
-xf86miscproto: xf86miscproto is part of X11.
+xf86miscproto: This package includes the protocol definitions of the "XFree86-Misc"
+xf86miscproto: extension to the X11 protocol.   The "XFree86-Misc" extension is
+xf86miscproto: supported by the XFree86 X server and versions of the Xorg X server
+xf86miscproto: prior to Xorg 1.6.
 xf86miscproto:
-xf86miscproto: For more information about the X.Org Foundation (the providers of the
-xf86miscproto: X.Org implementation of the X Window System), see their website:
 xf86miscproto:
-xf86miscproto: http://www.x.org
 xf86miscproto:
 xf86miscproto:
 xf86miscproto:
diff --git a/source/x/x11/slack-desc/xf86rushproto b/source/x/x11/slack-desc/xf86rushproto
deleted file mode 100644
index 0013da93..00000000
--- a/source/x/x11/slack-desc/xf86rushproto
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------------|
-xf86rushproto: xf86rushproto
-xf86rushproto:
-xf86rushproto: xf86rushproto is part of X11.
-xf86rushproto:
-xf86rushproto: For more information about the X.Org Foundation (the providers of the
-xf86rushproto: X.Org implementation of the X Window System), see their website:
-xf86rushproto:
-xf86rushproto: http://www.x.org
-xf86rushproto:
-xf86rushproto:
-xf86rushproto:
diff --git a/source/x/x11/slack-desc/xf86vidmodeproto b/source/x/x11/slack-desc/xf86vidmodeproto
index 13acda81..2e6d8ea0 100644
--- a/source/x/x11/slack-desc/xf86vidmodeproto
+++ b/source/x/x11/slack-desc/xf86vidmodeproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xf86vidmodeproto: xf86vidmodeproto
+xf86vidmodeproto: xf86vidmodeproto (C prototypes for XFree86 Video Mode Extension)
 xf86vidmodeproto:
 xf86vidmodeproto: xf86vidmodeproto is part of X11.
 xf86vidmodeproto:
diff --git a/source/x/x11/slack-desc/xfd b/source/x/x11/slack-desc/xfd
index 31f646f5..4d47163e 100644
--- a/source/x/x11/slack-desc/xfd
+++ b/source/x/x11/slack-desc/xfd
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xfd: xfd
+xfd: xfd (X11 font utility)
+xfd:
+xfd: xfd displays all the characters in a font using either the X11 core
+xfd: protocol or libXft2.
+xfd:
 xfd:
-xfd: xfd is part of X11.
 xfd:
-xfd: For more information about the X.Org Foundation (the providers of the
-xfd: X.Org implementation of the X Window System), see their website:
 xfd:
-xfd: http://www.x.org
 xfd:
 xfd:
 xfd:
diff --git a/source/x/x11/slack-desc/xfindproxy b/source/x/x11/slack-desc/xfindproxy
deleted file mode 100644
index 64125d2c..00000000
--- a/source/x/x11/slack-desc/xfindproxy
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-          |-----handy-ruler------------------------------------------------------|
-xfindproxy: xfindproxy
-xfindproxy:
-xfindproxy: xfindproxy is part of X11.
-xfindproxy:
-xfindproxy: For more information about the X.Org Foundation (the providers of the
-xfindproxy: X.Org implementation of the X Window System), see their website:
-xfindproxy:
-xfindproxy: http://www.x.org
-xfindproxy:
-xfindproxy:
-xfindproxy:
diff --git a/source/x/x11/slack-desc/xfontsel b/source/x/x11/slack-desc/xfontsel
index cb4594c2..0638c5e8 100644
--- a/source/x/x11/slack-desc/xfontsel
+++ b/source/x/x11/slack-desc/xfontsel
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xfontsel: xfontsel
+xfontsel: xfontsel (X11 font selector)
+xfontsel:
+xfontsel: xfontsel application provides a simple way to display the X11 core
+xfontsel: protocol fonts known to your X server, examine samples of each, and
+xfontsel: retrieve the X Logical Font Description ("XLFD") full name for a font.
 xfontsel:
-xfontsel: xfontsel is part of X11.
 xfontsel:
-xfontsel: For more information about the X.Org Foundation (the providers of the
-xfontsel: X.Org implementation of the X Window System), see their website:
 xfontsel:
-xfontsel: http://www.x.org
 xfontsel:
 xfontsel:
 xfontsel:
diff --git a/source/x/x11/slack-desc/xfs b/source/x/x11/slack-desc/xfs
index 33ea3687..63d8766e 100644
--- a/source/x/x11/slack-desc/xfs
+++ b/source/x/x11/slack-desc/xfs
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xfs: xfs
+xfs: xfs (font server for X11)
 xfs:
 xfs: xfs is part of X11.
 xfs:
diff --git a/source/x/x11/slack-desc/xfsinfo b/source/x/x11/slack-desc/xfsinfo
index 87abf1e4..85e5ef22 100644
--- a/source/x/x11/slack-desc/xfsinfo
+++ b/source/x/x11/slack-desc/xfsinfo
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-xfsinfo: xfsinfo
+xfsinfo: xfsinfo (X11 font server utility)
 xfsinfo:
-xfsinfo: xfsinfo is part of X11.
+xfsinfo: xfsinfo is a utility for displaying information about an X font server.
+xfsinfo: It is used to examine the capabilities of a server, the predefined
+xfsinfo: values for various parameters used in communicating between clients
+xfsinfo: and the server, and the font catalogues and alternate servers that
+xfsinfo: are available.
 xfsinfo:
-xfsinfo: For more information about the X.Org Foundation (the providers of the
-xfsinfo: X.Org implementation of the X Window System), see their website:
-xfsinfo:
-xfsinfo: http://www.x.org
 xfsinfo:
 xfsinfo:
 xfsinfo:
diff --git a/source/x/x11/slack-desc/xfwp b/source/x/x11/slack-desc/xfwp
deleted file mode 100644
index 572036c6..00000000
--- a/source/x/x11/slack-desc/xfwp
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-xfwp: xfwp
-xfwp:
-xfwp: xfwp is part of X11.
-xfwp:
-xfwp: For more information about the X.Org Foundation (the providers of the
-xfwp: X.Org implementation of the X Window System), see their website:
-xfwp:
-xfwp: http://www.x.org
-xfwp:
-xfwp:
-xfwp:
diff --git a/source/x/x11/slack-desc/xgamma b/source/x/x11/slack-desc/xgamma
index 69df14aa..c7ebcb95 100644
--- a/source/x/x11/slack-desc/xgamma
+++ b/source/x/x11/slack-desc/xgamma
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xgamma: xgamma
+xgamma: xgamma (X11 gamma utility)
+xgamma:
+xgamma: xgamma allows X users to query and alter the gamma correction of a
+xgamma: monitor via the X video mode extension (XFree86-VidModeExtension).
+xgamma:
 xgamma:
-xgamma: xgamma is part of X11.
 xgamma:
-xgamma: For more information about the X.Org Foundation (the providers of the
-xgamma: X.Org implementation of the X Window System), see their website:
 xgamma:
-xgamma: http://www.x.org
 xgamma:
 xgamma:
 xgamma:
diff --git a/source/x/x11/slack-desc/xgc b/source/x/x11/slack-desc/xgc
index 0de84bc0..e07e9bad 100644
--- a/source/x/x11/slack-desc/xgc
+++ b/source/x/x11/slack-desc/xgc
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xgc: xgc
+xgc: xgc (X11 demo client)
+xgc:
+xgc: xgc is an X11 graphics demo that shows various features of the X11
+xgc: core protocol graphics primitives.
+xgc:
 xgc:
-xgc: xgc is part of X11.
 xgc:
-xgc: For more information about the X.Org Foundation (the providers of the
-xgc: X.Org implementation of the X Window System), see their website:
 xgc:
-xgc: http://www.x.org
 xgc:
 xgc:
 xgc:
diff --git a/source/x/x11/slack-desc/xhost b/source/x/x11/slack-desc/xhost
index 53f9620b..a4b9501d 100644
--- a/source/x/x11/slack-desc/xhost
+++ b/source/x/x11/slack-desc/xhost
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xhost: xhost
+xhost: xhost (X11 authorization utility)
+xhost:
+xhost: xhost is used to manage the list of host names or user names allowed
+xhost: to make connections to the X server.
+xhost:
 xhost:
-xhost: xhost is part of X11.
 xhost:
-xhost: For more information about the X.Org Foundation (the providers of the
-xhost: X.Org implementation of the X Window System), see their website:
 xhost:
-xhost: http://www.x.org
 xhost:
 xhost:
 xhost:
diff --git a/source/x/x11/slack-desc/xineramaproto b/source/x/x11/slack-desc/xineramaproto
index dbdde800..6a39b1a1 100644
--- a/source/x/x11/slack-desc/xineramaproto
+++ b/source/x/x11/slack-desc/xineramaproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-xineramaproto: xineramaproto
+xineramaproto: xineramaproto (C prototypes for X11 Xinerama Extension)
 xineramaproto:
 xineramaproto: xineramaproto is part of X11.
 xineramaproto:
diff --git a/source/x/x11/slack-desc/xinit b/source/x/x11/slack-desc/xinit
index c1b05318..c64cd86a 100644
--- a/source/x/x11/slack-desc/xinit
+++ b/source/x/x11/slack-desc/xinit
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xinit: xinit
+xinit: xinit (scripts to start X11 servers)
+xinit:
+xinit: xinit is not intended for naive users.  Instead, site administrators 
+xinit: should design user-friendly scripts that present the desired interface
+xinit: when starting up X.  The startx script is one such example.
 xinit:
-xinit: xinit is part of X11.
 xinit:
-xinit: For more information about the X.Org Foundation (the providers of the
-xinit: X.Org implementation of the X Window System), see their website:
 xinit:
-xinit: http://www.x.org
 xinit:
 xinit:
 xinit:
diff --git a/source/x/x11/slack-desc/xinput b/source/x/x11/slack-desc/xinput
index 758a6ba6..6ae25aec 100644
--- a/source/x/x11/slack-desc/xinput
+++ b/source/x/x11/slack-desc/xinput
@@ -5,15 +5,15 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-    |-----handy-ruler------------------------------------------------------|
-xinput: xinput
+      |-----handy-ruler------------------------------------------------------|
+xinput: xinput (utility to configure and test X11 input devices)
 xinput:
 xinput: xinput is a utility to configure and test XInput devices. It wasn't
 xinput: originally designed to be the primary tool for doing this but it's
 xinput: still pretty much the only program out there for doing it. :-)
 xinput:
-xinput: xinput is part of X11.
-xinput:
 xinput: For more information about the X.Org Foundation (the providers of the
 xinput: X.Org implementation of the X Window System), see their website:
 xinput: http://www.x.org
+xinput:
+xinput:
diff --git a/source/x/x11/slack-desc/xkbcomp b/source/x/x11/slack-desc/xkbcomp
index ab3fc9b7..dc0da9b2 100644
--- a/source/x/x11/slack-desc/xkbcomp
+++ b/source/x/x11/slack-desc/xkbcomp
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-xkbcomp: xkbcomp
+xkbcomp: xkbcomp (X Keyboard Extension)
 xkbcomp:
 xkbcomp: xkbcomp is part of X11.
 xkbcomp:
diff --git a/source/x/x11/slack-desc/xkbdata b/source/x/x11/slack-desc/xkbdata
deleted file mode 100644
index 5fafad26..00000000
--- a/source/x/x11/slack-desc/xkbdata
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-       |-----handy-ruler------------------------------------------------------|
-xkbdata: xkbdata
-xkbdata:
-xkbdata: xkbdata is part of X11.
-xkbdata:
-xkbdata: For more information about the X.Org Foundation (the providers of the
-xkbdata: X.Org implementation of the X Window System), see their website:
-xkbdata:
-xkbdata: http://www.x.org
-xkbdata:
-xkbdata:
-xkbdata:
diff --git a/source/x/x11/slack-desc/xkbevd b/source/x/x11/slack-desc/xkbevd
index 9909e676..59b3f14e 100644
--- a/source/x/x11/slack-desc/xkbevd
+++ b/source/x/x11/slack-desc/xkbevd
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xkbevd: xkbevd
+xkbevd: xkbevd (X11 keyboard event daemon)
 xkbevd:
 xkbevd: xkbevd is part of X11.
 xkbevd:
diff --git a/source/x/x11/slack-desc/xkbprint b/source/x/x11/slack-desc/xkbprint
index efbe7ab9..ab30d051 100644
--- a/source/x/x11/slack-desc/xkbprint
+++ b/source/x/x11/slack-desc/xkbprint
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xkbprint: xkbprint
+xkbprint: xkbprint (X11 keyboard utility)
+xkbprint:
+xkbprint: xkbprint generates a printable or encapsulated PostScript description
+xkbprint: of an XKB keyboard description.
+xkbprint:
 xkbprint:
-xkbprint: xkbprint is part of X11.
 xkbprint:
-xkbprint: For more information about the X.Org Foundation (the providers of the
-xkbprint: X.Org implementation of the X Window System), see their website:
 xkbprint:
-xkbprint: http://www.x.org
 xkbprint:
 xkbprint:
 xkbprint:
diff --git a/source/x/x11/slack-desc/xkbutils b/source/x/x11/slack-desc/xkbutils
index 1e98d49d..80f8ee9e 100644
--- a/source/x/x11/slack-desc/xkbutils
+++ b/source/x/x11/slack-desc/xkbutils
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xkbutils: xkbutils
+xkbutils: xkbutils (X11 keyboard utilities)
+xkbutils:
+xkbutils: xkbutils is a collection of small utilities utilizing the XKeyboard
+xkbutils: (XKB) extension to the X11 protocol.
+xkbutils:
 xkbutils:
-xkbutils: xkbutils is part of X11.
 xkbutils:
-xkbutils: For more information about the X.Org Foundation (the providers of the
-xkbutils: X.Org implementation of the X Window System), see their website:
 xkbutils:
-xkbutils: http://www.x.org
 xkbutils:
 xkbutils:
 xkbutils:
diff --git a/source/x/x11/slack-desc/xkeyboard-config b/source/x/x11/slack-desc/xkeyboard-config
index 3b9b0bb7..01454254 100644
--- a/source/x/x11/slack-desc/xkeyboard-config
+++ b/source/x/x11/slack-desc/xkeyboard-config
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                 |-----handy-ruler------------------------------------------------------|
-xkeyboard-config: xkeyboard-config
+xkeyboard-config: xkeyboard-config (X Keyboard Extension config files)
 xkeyboard-config:
-xkeyboard-config: xkeyboard-config is part of X11.
-xkeyboard-config:
-xkeyboard-config: For more information about the X.Org Foundation (the providers of the
-xkeyboard-config: X.Org implementation of the X Window System), see their website:
-xkeyboard-config:
-xkeyboard-config: http://www.x.org
+xkeyboard-config: The X Keyboard Extension essentially replaces the core protocol
+xkeyboard-config: definition of keyboard. The extension makes possible to clearly and
+xkeyboard-config: explicitly specify most aspects of keyboard behaviour on per-key
+xkeyboard-config: basis and to more closely track the logical and physical state of the
+xkeyboard-config: keyboard. It also includes a number of keyboard controls designed to
+xkeyboard-config: make keyboards more accessible to people with physical impairments.
 xkeyboard-config:
 xkeyboard-config:
 xkeyboard-config:
diff --git a/source/x/x11/slack-desc/xkill b/source/x/x11/slack-desc/xkill
index 82aedb48..66904b44 100644
--- a/source/x/x11/slack-desc/xkill
+++ b/source/x/x11/slack-desc/xkill
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xkill: xkill
+xkill: xkill (X11 utility)
+xkill:
+xkill: xkill is a utility for forcing the X server to close connections to
+xkill: clients.  This program is very dangerous, but is useful for aborting
+xkill: programs that have displayed undesired windows on a user's screen.
 xkill:
-xkill: xkill is part of X11.
 xkill:
-xkill: For more information about the X.Org Foundation (the providers of the
-xkill: X.Org implementation of the X Window System), see their website:
 xkill:
-xkill: http://www.x.org
 xkill:
 xkill:
 xkill:
diff --git a/source/x/x11/slack-desc/xload b/source/x/x11/slack-desc/xload
index b95b6b6c..24adeac7 100644
--- a/source/x/x11/slack-desc/xload
+++ b/source/x/x11/slack-desc/xload
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xload: xload
+xload: xload (displays a histogram of the system load average)
 xload:
 xload: xload is part of X11.
 xload:
diff --git a/source/x/x11/slack-desc/xlogo b/source/x/x11/slack-desc/xlogo
index fbd28cc1..e97b3e25 100644
--- a/source/x/x11/slack-desc/xlogo
+++ b/source/x/x11/slack-desc/xlogo
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xlogo: xlogo
+xlogo: xlogo (displays the X Window System logo)
 xlogo:
 xlogo: xlogo is part of X11.
 xlogo:
diff --git a/source/x/x11/slack-desc/xlsatoms b/source/x/x11/slack-desc/xlsatoms
index f4e7e79c..c6e958ae 100644
--- a/source/x/x11/slack-desc/xlsatoms
+++ b/source/x/x11/slack-desc/xlsatoms
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xlsatoms: xlsatoms
+xlsatoms: xlsatoms (lists the interned atoms defined on an X11 server)
 xlsatoms:
 xlsatoms: xlsatoms is part of X11.
 xlsatoms:
diff --git a/source/x/x11/slack-desc/xlsclients b/source/x/x11/slack-desc/xlsclients
index 2bcf25fb..2cf50b06 100644
--- a/source/x/x11/slack-desc/xlsclients
+++ b/source/x/x11/slack-desc/xlsclients
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
           |-----handy-ruler------------------------------------------------------|
-xlsclients: xlsclients
+xlsclients: xlsclients (X11 utility for listing X client info)
+xlsclients:
+xlsclients: xlsclients is a utility for listing information about the client
+xlsclients: applications running on a X11 server.
+xlsclients:
 xlsclients:
-xlsclients: xlsclients is part of X11.
 xlsclients:
-xlsclients: For more information about the X.Org Foundation (the providers of the
-xlsclients: X.Org implementation of the X Window System), see their website:
 xlsclients:
-xlsclients: http://www.x.org
 xlsclients:
 xlsclients:
 xlsclients:
diff --git a/source/x/x11/slack-desc/xlsfonts b/source/x/x11/slack-desc/xlsfonts
index 25e25afc..d285ab05 100644
--- a/source/x/x11/slack-desc/xlsfonts
+++ b/source/x/x11/slack-desc/xlsfonts
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xlsfonts: xlsfonts
+xlsfonts: xlsfonts (X11 font utility to list available fonts)
+xlsfonts:
+xlsfonts: xlsfonts lists fonts available from an X server via the X11 core
+xlsfonts: protocol.
+xlsfonts:
 xlsfonts:
-xlsfonts: xlsfonts is part of X11.
 xlsfonts:
-xlsfonts: For more information about the X.Org Foundation (the providers of the
-xlsfonts: X.Org implementation of the X Window System), see their website:
 xlsfonts:
-xlsfonts: http://www.x.org
 xlsfonts:
 xlsfonts:
 xlsfonts:
diff --git a/source/x/x11/slack-desc/xmag b/source/x/x11/slack-desc/xmag
index 38174dd7..50c329f8 100644
--- a/source/x/x11/slack-desc/xmag
+++ b/source/x/x11/slack-desc/xmag
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-xmag: xmag
+xmag: xmag (X11 accessibility utility)
+xmag:
+xmag: xmag displays a magnified snapshot of a portion of an X11 screen.
+xmag:
+xmag:
 xmag:
-xmag: xmag is part of X11.
 xmag:
-xmag: For more information about the X.Org Foundation (the providers of the
-xmag: X.Org implementation of the X Window System), see their website:
 xmag:
-xmag: http://www.x.org
 xmag:
 xmag:
 xmag:
diff --git a/source/x/x11/slack-desc/xman b/source/x/x11/slack-desc/xman
index 98ce929c..206da5c8 100644
--- a/source/x/x11/slack-desc/xman
+++ b/source/x/x11/slack-desc/xman
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-xman: xman
+xman: xman (graphical manual page browser using the Xaw toolkit)
 xman:
 xman: xman is part of X11.
 xman:
diff --git a/source/x/x11/slack-desc/xmessage b/source/x/x11/slack-desc/xmessage
index 12c9c0df..233d4aa2 100644
--- a/source/x/x11/slack-desc/xmessage
+++ b/source/x/x11/slack-desc/xmessage
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xmessage: xmessage
+xmessage: xmessage (displays a message or query in a window)
+xmessage:
+xmessage: The user can click on an "okay" button to dismiss it or can select
+xmessage: one of several buttons to answer a question.  xmessage can also exit
+xmessage: after a specified time.
 xmessage:
-xmessage: xmessage is part of X11.
 xmessage:
-xmessage: For more information about the X.Org Foundation (the providers of the
-xmessage: X.Org implementation of the X Window System), see their website:
 xmessage:
-xmessage: http://www.x.org
 xmessage:
 xmessage:
 xmessage:
diff --git a/source/x/x11/slack-desc/xmh b/source/x/x11/slack-desc/xmh
index a1415c8b..8730f1f2 100644
--- a/source/x/x11/slack-desc/xmh
+++ b/source/x/x11/slack-desc/xmh
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xmh: xmh
+xmh: xmh (X11 mail handler)
+xmh:
+xmh: The xmh program provides a graphical user interface to the MH Message
+xmh: Handling System.  To actually do things with your mail, it makes
+xmh: calls to the MH package.
 xmh:
-xmh: xmh is part of X11.
 xmh:
-xmh: For more information about the X.Org Foundation (the providers of the
-xmh: X.Org implementation of the X Window System), see their website:
 xmh:
-xmh: http://www.x.org
 xmh:
 xmh:
 xmh:
diff --git a/source/x/x11/slack-desc/xmodmap b/source/x/x11/slack-desc/xmodmap
index aeb77cff..9397f1c3 100644
--- a/source/x/x11/slack-desc/xmodmap
+++ b/source/x/x11/slack-desc/xmodmap
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-xmodmap: xmodmap
+xmodmap: xmodmap (X11 keyboard utility)
 xmodmap:
-xmodmap: xmodmap is part of X11.
+xmodmap: The xmodmap program is used to edit and display the keyboard modifier
+xmodmap: map and keymap table that are used by client applications to convert
+xmodmap: event keycodes into keysyms.  It is usually run from a user's session
+xmodmap: startup script to configure the keyboard according to personal tastes.
 xmodmap:
-xmodmap: For more information about the X.Org Foundation (the providers of the
-xmodmap: X.Org implementation of the X Window System), see their website:
 xmodmap:
-xmodmap: http://www.x.org
 xmodmap:
 xmodmap:
 xmodmap:
diff --git a/source/x/x11/slack-desc/xmore b/source/x/x11/slack-desc/xmore
index a714db3d..c8696b87 100644
--- a/source/x/x11/slack-desc/xmore
+++ b/source/x/x11/slack-desc/xmore
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xmore: xmore
+xmore: xmore (plain text display program for the X Window System)
 xmore:
 xmore: xmore is part of X11.
 xmore:
diff --git a/source/x/x11/slack-desc/xorg-cf-files b/source/x/x11/slack-desc/xorg-cf-files
index a5f15784..343f5037 100644
--- a/source/x/x11/slack-desc/xorg-cf-files
+++ b/source/x/x11/slack-desc/xorg-cf-files
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
-xorg-cf-files: xorg-cf-files
+xorg-cf-files: xorg-cf-files (X11 config files for imake)
 xorg-cf-files:
-xorg-cf-files: xorg-cf-files is part of X11.
+xorg-cf-files: The xorg-cf-files package contains the data files for the imake
+xorg-cf-files: utility, defining the known settings for a wide variety of platforms
+xorg-cf-files: (many of which have not been verified or tested in over a decade) and
+xorg-cf-files: for many of the libraries formerly delivered in the X.Org monolithic
+xorg-cf-files: releases.
 xorg-cf-files:
-xorg-cf-files: For more information about the X.Org Foundation (the providers of the
-xorg-cf-files: X.Org implementation of the X Window System), see their website:
-xorg-cf-files:
-xorg-cf-files: http://www.x.org
 xorg-cf-files:
 xorg-cf-files:
 xorg-cf-files:
diff --git a/source/x/x11/slack-desc/xorg-docs b/source/x/x11/slack-desc/xorg-docs
index aee2a992..dfe9e249 100644
--- a/source/x/x11/slack-desc/xorg-docs
+++ b/source/x/x11/slack-desc/xorg-docs
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
          |-----handy-ruler------------------------------------------------------|
-xorg-docs: xorg-docs
+xorg-docs: xorg-docs (documentation for X11)
 xorg-docs:
-xorg-docs: xorg-docs is part of X11.
+xorg-docs: This package provides miscellaneous documentation for the X Window
+xorg-docs: System that doesn't better fit into other packages.
+xorg-docs:
+xorg-docs: The preferred documentation format for these documents is DocBook XML.
 xorg-docs:
-xorg-docs: For more information about the X.Org Foundation (the providers of the
-xorg-docs: X.Org implementation of the X Window System), see their website:
 xorg-docs:
-xorg-docs: http://www.x.org
 xorg-docs:
 xorg-docs:
 xorg-docs:
diff --git a/source/x/x11/slack-desc/xorg-server-xdmx b/source/x/x11/slack-desc/xorg-server-xdmx
deleted file mode 100644
index 0cfe5c8f..00000000
--- a/source/x/x11/slack-desc/xorg-server-xdmx
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-                |-----handy-ruler------------------------------------------------------|
-xorg-server-xdmx: xorg-server-xdmx (Distributed Multi-head X server)
-xorg-server-xdmx:
-xorg-server-xdmx: Xdmx is a proxy X server that uses one or more other X servers as its
-xorg-server-xdmx: display devices.  It provides multi-head X functionality for displays
-xorg-server-xdmx: that might be located on different machines.
-xorg-server-xdmx:
-xorg-server-xdmx:
-xorg-server-xdmx:
-xorg-server-xdmx:
-xorg-server-xdmx:
-xorg-server-xdmx:
diff --git a/source/x/x11/slack-desc/xorg-sgml-doctools b/source/x/x11/slack-desc/xorg-sgml-doctools
index 1467fb82..df867004 100644
--- a/source/x/x11/slack-desc/xorg-sgml-doctools
+++ b/source/x/x11/slack-desc/xorg-sgml-doctools
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
                   |-----handy-ruler------------------------------------------------------|
-xorg-sgml-doctools: xorg-sgml-doctools
+xorg-sgml-doctools: xorg-sgml-doctools (X.org documentation tools)
 xorg-sgml-doctools:
-xorg-sgml-doctools: xorg-sgml-doctools is part of X11.
-xorg-sgml-doctools:
-xorg-sgml-doctools: For more information about the X.Org Foundation (the providers of the
-xorg-sgml-doctools: X.Org implementation of the X Window System), see their website:
-xorg-sgml-doctools:
-xorg-sgml-doctools: http://www.x.org
+xorg-sgml-doctools: This package provides a common set of SGML entities and XML/CSS style
+xorg-sgml-doctools: sheets used in building/formatting the documentation provided in other
+xorg-sgml-doctools: X.Org packages.   It's typically only needed by people building from
+xorg-sgml-doctools: source who want to produce formatted documentation from their builds,
+xorg-sgml-doctools: or those who have installed the HTML version of the documentation,
+xorg-sgml-doctools: which refers to the included common xorg.css stylesheet.
 xorg-sgml-doctools:
 xorg-sgml-doctools:
 xorg-sgml-doctools:
diff --git a/source/x/x11/slack-desc/xphelloworld b/source/x/x11/slack-desc/xphelloworld
deleted file mode 100644
index e5ae0f3b..00000000
--- a/source/x/x11/slack-desc/xphelloworld
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-xphelloworld: xphelloworld
-xphelloworld:
-xphelloworld: xphelloworld is part of X11.
-xphelloworld:
-xphelloworld: For more information about the X.Org Foundation (the providers of the
-xphelloworld: X.Org implementation of the X Window System), see their website:
-xphelloworld:
-xphelloworld: http://www.x.org
-xphelloworld:
-xphelloworld:
-xphelloworld:
diff --git a/source/x/x11/slack-desc/xplsprinters b/source/x/x11/slack-desc/xplsprinters
deleted file mode 100644
index b4201593..00000000
--- a/source/x/x11/slack-desc/xplsprinters
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-xplsprinters: xplsprinters
-xplsprinters:
-xplsprinters: xplsprinters is part of X11.
-xplsprinters:
-xplsprinters: For more information about the X.Org Foundation (the providers of the
-xplsprinters: X.Org implementation of the X Window System), see their website:
-xplsprinters:
-xplsprinters: http://www.x.org
-xplsprinters:
-xplsprinters:
-xplsprinters:
diff --git a/source/x/x11/slack-desc/xpr b/source/x/x11/slack-desc/xpr
index 1e7795ca..45936d40 100644
--- a/source/x/x11/slack-desc/xpr
+++ b/source/x/x11/slack-desc/xpr
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xpr: xpr
+xpr: xpr (dump an X window directly to a printer)
+xpr:
+xpr: xpr takes as input a window dump file produced by xwd
+xpr: and formats it for output on various types of printers.
+xpr:
 xpr:
-xpr: xpr is part of X11.
 xpr:
-xpr: For more information about the X.Org Foundation (the providers of the
-xpr: X.Org implementation of the X Window System), see their website:
 xpr:
-xpr: http://www.x.org
 xpr:
 xpr:
 xpr:
diff --git a/source/x/x11/slack-desc/xprehashprinterlist b/source/x/x11/slack-desc/xprehashprinterlist
deleted file mode 100644
index 3444a5ee..00000000
--- a/source/x/x11/slack-desc/xprehashprinterlist
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------------|
-xprehashprinterlist: xprehashprinterlist
-xprehashprinterlist:
-xprehashprinterlist: xprehashprinterlist is part of X11.
-xprehashprinterlist:
-xprehashprinterlist: For more information about the X.Org Foundation (the providers of the
-xprehashprinterlist: X.Org implementation of the X Window System), see their website:
-xprehashprinterlist:
-xprehashprinterlist: http://www.x.org
-xprehashprinterlist:
-xprehashprinterlist:
-xprehashprinterlist:
diff --git a/source/x/x11/slack-desc/xprop b/source/x/x11/slack-desc/xprop
index 8996f509..99788723 100644
--- a/source/x/x11/slack-desc/xprop
+++ b/source/x/x11/slack-desc/xprop
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
      |-----handy-ruler------------------------------------------------------|
-xprop: xprop
+xprop: xprop (displays window and font properties of an X server)
 xprop:
 xprop: xprop is part of X11.
 xprop:
diff --git a/source/x/x11/slack-desc/xproto b/source/x/x11/slack-desc/xproto
index e57551ab..1c230b1e 100644
--- a/source/x/x11/slack-desc/xproto
+++ b/source/x/x11/slack-desc/xproto
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xproto: xproto
+xproto: xproto (C prototypes for X Window System Core Protocol)
 xproto:
 xproto: xproto is part of X11.
 xproto:
diff --git a/source/x/x11/slack-desc/xproxymanagementprotocol b/source/x/x11/slack-desc/xproxymanagementprotocol
deleted file mode 100644
index a5586dc6..00000000
--- a/source/x/x11/slack-desc/xproxymanagementprotocol
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                        |-----handy-ruler------------------------------------------------------|
-xproxymanagementprotocol: xproxymanagementprotocol
-xproxymanagementprotocol:
-xproxymanagementprotocol: xproxymanagementprotocol is part of X11.
-xproxymanagementprotocol:
-xproxymanagementprotocol: For more information about the X.Org Foundation (the providers of the
-xproxymanagementprotocol: X.Org implementation of the X Window System), see their website:
-xproxymanagementprotocol:
-xproxymanagementprotocol: http://www.x.org
-xproxymanagementprotocol:
-xproxymanagementprotocol:
-xproxymanagementprotocol:
diff --git a/source/x/x11/slack-desc/xpyb b/source/x/x11/slack-desc/xpyb
index 92baab77..4d96cc27 100644
--- a/source/x/x11/slack-desc/xpyb
+++ b/source/x/x11/slack-desc/xpyb
@@ -5,15 +5,15 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-    |-----handy-ruler-------------------------------------------------------|
-xpyb: xpyb
+    |-----handy-ruler------------------------------------------------------|
+xpyb: xpyb (Python bindings for X)
+xpyb:
+xpyb: xpyb provides a Python binding to the X Window System protocol
+xpyb: via libxcb.
+xpyb:
 xpyb:
-xpyb: xpyb is part of X11.
 xpyb:
-xpyb: For more information about the X.Org Foundation (the providers of the
-xpyb: X.Org implementation of the X Window System), see their website:
 xpyb:
-xpyb: http://www.x.org
 xpyb:
 xpyb:
 xpyb:
diff --git a/source/x/x11/slack-desc/xrandr b/source/x/x11/slack-desc/xrandr
index 8f158dd0..059fe1b3 100644
--- a/source/x/x11/slack-desc/xrandr
+++ b/source/x/x11/slack-desc/xrandr
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xrandr: xrandr
+xrandr: xrandr (X11 RandR utility)
+xrandr:
+xrandr: Primitive command line interface to X11 Resize, Rotate, and Reflect
+xrandr: (RandR) extension
+xrandr:
 xrandr:
-xrandr: xrandr is part of X11.
 xrandr:
-xrandr: For more information about the X.Org Foundation (the providers of the
-xrandr: X.Org implementation of the X Window System), see their website:
 xrandr:
-xrandr: http://www.x.org
 xrandr:
 xrandr:
 xrandr:
diff --git a/source/x/x11/slack-desc/xrdb b/source/x/x11/slack-desc/xrdb
index 26ea4786..9adef974 100644
--- a/source/x/x11/slack-desc/xrdb
+++ b/source/x/x11/slack-desc/xrdb
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-xrdb: xrdb
+xrdb: xrdb (X server resource database utility)
 xrdb:
 xrdb: xrdb is part of X11.
 xrdb:
diff --git a/source/x/x11/slack-desc/xrefresh b/source/x/x11/slack-desc/xrefresh
index 65e7140c..f641dcf8 100644
--- a/source/x/x11/slack-desc/xrefresh
+++ b/source/x/x11/slack-desc/xrefresh
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xrefresh: xrefresh
+xrefresh: xrefresh (refresh all or part of an X screen)
 xrefresh:
 xrefresh: xrefresh is part of X11.
 xrefresh:
diff --git a/source/x/x11/slack-desc/xrx b/source/x/x11/slack-desc/xrx
deleted file mode 100644
index 3a6e369c..00000000
--- a/source/x/x11/slack-desc/xrx
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-   |-----handy-ruler------------------------------------------------------|
-xrx: xrx
-xrx:
-xrx: xrx is part of X11.
-xrx:
-xrx: For more information about the X.Org Foundation (the providers of the
-xrx: X.Org implementation of the X Window System), see their website:
-xrx:
-xrx: http://www.x.org
-xrx:
-xrx:
-xrx:
diff --git a/source/x/x11/slack-desc/xscope b/source/x/x11/slack-desc/xscope
index 5008a745..a513cba6 100644
--- a/source/x/x11/slack-desc/xscope
+++ b/source/x/x11/slack-desc/xscope
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xscope: xscope
+xscope: xscope (program to monitor X11/Client conversations)
 xscope:
 xscope: xscope is part of X11.
 xscope:
diff --git a/source/x/x11/slack-desc/xset b/source/x/x11/slack-desc/xset
index e434079c..da54a274 100644
--- a/source/x/x11/slack-desc/xset
+++ b/source/x/x11/slack-desc/xset
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-xset: xset
+xset: xset (get and set various preferences and properties)
+xset:
+xset: xset is a command line utility to get and set various preferences
+xset: and properties for the current session.
+xset:
 xset:
-xset: xset is part of X11.
 xset:
-xset: For more information about the X.Org Foundation (the providers of the
-xset: X.Org implementation of the X Window System), see their website:
 xset:
-xset: http://www.x.org
 xset:
 xset:
 xset:
diff --git a/source/x/x11/slack-desc/xsetmode b/source/x/x11/slack-desc/xsetmode
deleted file mode 100644
index b727c3e9..00000000
--- a/source/x/x11/slack-desc/xsetmode
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-xsetmode: xsetmode
-xsetmode:
-xsetmode: xsetmode is part of X11.
-xsetmode:
-xsetmode: For more information about the X.Org Foundation (the providers of the
-xsetmode: X.Org implementation of the X Window System), see their website:
-xsetmode:
-xsetmode: http://www.x.org
-xsetmode:
-xsetmode:
-xsetmode:
diff --git a/source/x/x11/slack-desc/xsetpointer b/source/x/x11/slack-desc/xsetpointer
deleted file mode 100644
index cbfaa0c2..00000000
--- a/source/x/x11/slack-desc/xsetpointer
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-           |-----handy-ruler------------------------------------------------------|
-xsetpointer: xsetpointer
-xsetpointer:
-xsetpointer: xsetpointer is part of X11.
-xsetpointer:
-xsetpointer: For more information about the X.Org Foundation (the providers of the
-xsetpointer: X.Org implementation of the X Window System), see their website:
-xsetpointer:
-xsetpointer: http://www.x.org
-xsetpointer:
-xsetpointer:
-xsetpointer:
diff --git a/source/x/x11/slack-desc/xsetroot b/source/x/x11/slack-desc/xsetroot
index 8a9a4be3..569396ae 100644
--- a/source/x/x11/slack-desc/xsetroot
+++ b/source/x/x11/slack-desc/xsetroot
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xsetroot: xsetroot
+xsetroot: xsetroot (root window parameter setting utility for X)
 xsetroot:
 xsetroot: xsetroot is part of X11.
 xsetroot:
diff --git a/source/x/x11/slack-desc/xsm b/source/x/x11/slack-desc/xsm
index 8fe6ba3c..0034f323 100644
--- a/source/x/x11/slack-desc/xsm
+++ b/source/x/x11/slack-desc/xsm
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xsm: xsm
+xsm: xsm (X11 Session Manager)
 xsm:
 xsm: xsm is part of X11.
 xsm:
diff --git a/source/x/x11/slack-desc/xstdcmap b/source/x/x11/slack-desc/xstdcmap
index b1bd5e6a..f659e758 100644
--- a/source/x/x11/slack-desc/xstdcmap
+++ b/source/x/x11/slack-desc/xstdcmap
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xstdcmap: xstdcmap
+xstdcmap: xstdcmap (X11 color utility)
 xstdcmap:
-xstdcmap: xstdcmap is part of X11.
+xstdcmap: The xstdcmap utility can be used to selectively define standard
+xstdcmap: colormap properties.  It is intended to be run from a user's X
+xstdcmap: startup script to create standard colormap definitions in order to
+xstdcmap: facilitate sharing of scarce colormap resources among clients using
+xstdcmap: PseudoColor visuals.
 xstdcmap:
-xstdcmap: For more information about the X.Org Foundation (the providers of the
-xstdcmap: X.Org implementation of the X Window System), see their website:
-xstdcmap:
-xstdcmap: http://www.x.org
 xstdcmap:
 xstdcmap:
 xstdcmap:
diff --git a/source/x/x11/slack-desc/xtrans b/source/x/x11/slack-desc/xtrans
index f7ea71c3..26c4866a 100644
--- a/source/x/x11/slack-desc/xtrans
+++ b/source/x/x11/slack-desc/xtrans
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xtrans: xtrans
+xtrans: xtrans (X network transport library)
 xtrans:
-xtrans: xtrans is part of X11.
+xtrans: xtrans is a library of code that is shared among various X packages
+xtrans: to handle network protocol transport in a modular fashion, allowing a
+xtrans: single place to add new transport types.  It is used by the X server,
+xtrans: libX11, libICE, the X font server, and related components.
 xtrans:
-xtrans: For more information about the X.Org Foundation (the providers of the
-xtrans: X.Org implementation of the X Window System), see their website:
 xtrans:
-xtrans: http://www.x.org
 xtrans:
 xtrans:
 xtrans:
diff --git a/source/x/x11/slack-desc/xtrap b/source/x/x11/slack-desc/xtrap
deleted file mode 100644
index bdf77e43..00000000
--- a/source/x/x11/slack-desc/xtrap
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-xtrap: xtrap
-xtrap:
-xtrap: xtrap is part of X11.
-xtrap:
-xtrap: For more information about the X.Org Foundation (the providers of the
-xtrap: X.Org implementation of the X Window System), see their website:
-xtrap:
-xtrap: http://www.x.org
-xtrap:
-xtrap:
-xtrap:
diff --git a/source/x/x11/slack-desc/xvidtune b/source/x/x11/slack-desc/xvidtune
index bdadf298..d55fae9f 100644
--- a/source/x/x11/slack-desc/xvidtune
+++ b/source/x/x11/slack-desc/xvidtune
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xvidtune: xvidtune
+xvidtune: xvidtune (X11 video utility)
+xvidtune:
+xvidtune: xvidtune is a client interface to the X server video mode extension
+xvidtune: (XFree86-VidModeExtension).
+xvidtune:
 xvidtune:
-xvidtune: xvidtune is part of X11.
 xvidtune:
-xvidtune: For more information about the X.Org Foundation (the providers of the
-xvidtune: X.Org implementation of the X Window System), see their website:
 xvidtune:
-xvidtune: http://www.x.org
 xvidtune:
 xvidtune:
 xvidtune:
diff --git a/source/x/x11/slack-desc/xvinfo b/source/x/x11/slack-desc/xvinfo
index 54a44c8a..84f50e6f 100644
--- a/source/x/x11/slack-desc/xvinfo
+++ b/source/x/x11/slack-desc/xvinfo
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
       |-----handy-ruler------------------------------------------------------|
-xvinfo: xvinfo
+xvinfo: xvinfo (X11 X-Video utility)
+xvinfo:
+xvinfo: xvinfo prints out the capabilities of any video adaptors associated
+xvinfo: with the display that are accessible through the X-Video extension.
+xvinfo:
 xvinfo:
-xvinfo: xvinfo is part of X11.
 xvinfo:
-xvinfo: For more information about the X.Org Foundation (the providers of the
-xvinfo: X.Org implementation of the X Window System), see their website:
 xvinfo:
-xvinfo: http://www.x.org
 xvinfo:
 xvinfo:
 xvinfo:
diff --git a/source/x/x11/slack-desc/xwd b/source/x/x11/slack-desc/xwd
index 6b2450a0..8230f336 100644
--- a/source/x/x11/slack-desc/xwd
+++ b/source/x/x11/slack-desc/xwd
@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
    |-----handy-ruler------------------------------------------------------|
-xwd: xwd
+xwd: xwd (dump an image of an X window)
 xwd:
 xwd: xwd is part of X11.
 xwd:
diff --git a/source/x/x11/slack-desc/xwininfo b/source/x/x11/slack-desc/xwininfo
index 03e11ddf..9545fbfa 100644
--- a/source/x/x11/slack-desc/xwininfo
+++ b/source/x/x11/slack-desc/xwininfo
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
         |-----handy-ruler------------------------------------------------------|
-xwininfo: xwininfo
+xwininfo: xwininfo (prints information about windows on an X server)
+xwininfo:
+xwininfo: Various information is displayed depending on which options are
+xwininfo: selected.
+xwininfo:
 xwininfo:
-xwininfo: xwininfo is part of X11.
 xwininfo:
-xwininfo: For more information about the X.Org Foundation (the providers of the
-xwininfo: X.Org implementation of the X Window System), see their website:
 xwininfo:
-xwininfo: http://www.x.org
 xwininfo:
 xwininfo:
 xwininfo:
diff --git a/source/x/x11/slack-desc/xwud b/source/x/x11/slack-desc/xwud
index f0c22d34..6ae90864 100644
--- a/source/x/x11/slack-desc/xwud
+++ b/source/x/x11/slack-desc/xwud
@@ -6,14 +6,14 @@
 # customary to leave one space after the ':'.
 
     |-----handy-ruler------------------------------------------------------|
-xwud: xwud
+xwud: xwud (X screen dump viewer)
+xwud:
+xwud: xwud allows X users to display in a window an image saved in a
+xwud: specially formatted dump file, such as produced by xwd.
+xwud:
 xwud:
-xwud: xwud is part of X11.
 xwud:
-xwud: For more information about the X.Org Foundation (the providers of the
-xwud: X.Org implementation of the X Window System), see their website:
 xwud:
-xwud: http://www.x.org
 xwud:
 xwud:
 xwud:
diff --git a/source/x/x11/src/get-xf86-video-nouveau.sh b/source/x/x11/src/get-xf86-video-nouveau.sh
index 72d3efd3..9a21febd 100755
--- a/source/x/x11/src/get-xf86-video-nouveau.sh
+++ b/source/x/x11/src/get-xf86-video-nouveau.sh
@@ -1,8 +1,14 @@
 # Pull a stable branch + patches
 BRANCH=master
 
-rm -rf xf86-video-nouveau
-git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
+#rm -rf xf86-video-nouveau
+if [ -d xf86-video-nouveau ]; then
+  cd xf86-video-nouveau
+  git pull -f
+  cd ..
+else
+  git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
+fi
 
 # use master branch
 #( cd xf86-video-nouveau 
diff --git a/source/x/xaw3d/pull-xaw3d.sh b/source/x/xaw3d/pull-xaw3d.sh
deleted file mode 100755
index 96141a6d..00000000
--- a/source/x/xaw3d/pull-xaw3d.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-rm -rf xaw3d
-git clone git://gitorious.org/xaw3d/xaw3d.git
-( cd xaw3d && rm -rf .git* )
-mv xaw3d xaw3d-$(date +%Y%m%d)git
-tar cf xaw3d-$(date +%Y%m%d)git.tar xaw3d-$(date +%Y%m%d)git
-xz -9 xaw3d-$(date +%Y%m%d)git.tar
-
diff --git a/source/x/xaw3d/slack-desc b/source/x/xaw3d/slack-desc
deleted file mode 100644
index 75ce0e1d..00000000
--- a/source/x/xaw3d/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-xaw3d: xaw3d (3D version of libXaw)
-xaw3d:
-xaw3d: Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena
-xaw3d: Widget set.  The Three-D Athena may be used as a replacement for the
-xaw3d: Athena (Xaw) Widget set -- you may relink almost any Athena Widget
-xaw3d: based application and obtain a three dimensional appearance on some of
-xaw3d: the widgets.  You can also replace your shared libXaw with libXaw3d
-xaw3d: and obtain the three dimensional appearance without even relinking.
-xaw3d:
-xaw3d:
-xaw3d:
diff --git a/source/x/xaw3d/xaw3d.SlackBuild b/source/x/xaw3d/xaw3d.SlackBuild
deleted file mode 100755
index 1574d7f3..00000000
--- a/source/x/xaw3d/xaw3d.SlackBuild
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=xaw3d
-VERSION=${VERSION:-20110415git}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686" 
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-xaw3d
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf $TMP/xaw3d-$VERSION
-tar xvf $CWD/xaw3d-$VERSION.tar.?z* || exit 1
-cd xaw3d-$VERSION/xc || exit 1
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-cd lib/Xaw3d
-ln -s .. X11
-xmkmf
-make CCOPTIONS="$SLKCFLAGS -I." || exit 1
-make install DESTDIR=$PKG
-
-strip --strip-unneeded $PKG/usr/lib${LIBDIRSUFFIX}/libXaw3d.so.*
-# Make compat symlinks.  For whatever reason, Xaw3d has had more random
-# numbers assigned to it over the years than about anything, so we need
-# to make links that work for at least .6 and .8 in addition to .7.
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  ln -sf libXaw3d.so.7 libXaw3d.so.8
-  ln -sf libXaw3d.so.7 libXaw3d.so.6
-)
-mkdir -p $PKG/usr/doc/Xaw3d-$VERSION
-cp -a README.XAW3D $PKG/usr/doc/Xaw3d-$VERSION
-chmod 644 $PKG/usr/doc/Xaw3d-$VERSION/README.XAW3D
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Build the package:
-cd $PKG
-/sbin/makepkg -l y -c y $TMP/xaw3d-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild b/source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild
index d3b96542..0b5b65dc 100755
--- a/source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild
+++ b/source/x/xdg-user-dirs/xdg-user-dirs.SlackBuild
@@ -23,7 +23,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PKGNAM=xdg-user-dirs
-VERSION=${VERSION:-0.13}
+VERSION=${VERSION:-0.14}
 BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
@@ -89,6 +89,14 @@ cp -a \
   AUTHORS COPYING* INSTALL NEWS README* TODO \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/source/xap/xfce4-power-manager/doinst.sh b/source/x/xterm/doinst.sh
index 1f8ff67d..1f8ff67d 100644
--- a/source/xap/xfce4-power-manager/doinst.sh
+++ b/source/x/xterm/doinst.sh
diff --git a/source/x/xterm/xterm.SlackBuild b/source/x/xterm/xterm.SlackBuild
index 863ccae4..392d3053 100755
--- a/source/x/xterm/xterm.SlackBuild
+++ b/source/x/xterm/xterm.SlackBuild
@@ -88,12 +88,19 @@ CFLAGS="$SLKCFLAGS" \
   --enable-wide-chars \
   --enable-88-color \
   --enable-256-color \
+  --with-icon-theme=hicolor \
+  --with-icondir=/usr/share/icons \
+  --with-pixmapdir=/usr/share/pixmaps \
   --build=$ARCH-slackware-linux
 
 # Build and install:
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# Not sure why "make install" doesn't do this:
+mkdir -p $PKG/usr/share/applications
+cp xterm.desktop uxterm.desktop $PKG/usr/share/applications
+
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
@@ -129,6 +136,7 @@ cp -a \
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xap/MPlayer/MPlayer.SlackBuild b/source/xap/MPlayer/MPlayer.SlackBuild
index 17b8b036..663fe2f8 100755
--- a/source/xap/MPlayer/MPlayer.SlackBuild
+++ b/source/xap/MPlayer/MPlayer.SlackBuild
@@ -1,7 +1,6 @@
 #!/bin/sh
-
-# Copyright 2006, 2007, 2008, 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# $Id: MPlayer.SlackBuild,v 1.27 2012/07/01 13:07:08 root Exp root $
+# Copyright 2006, 2007, 2008, 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
 # All rights reserved.
 #
 #   Permission to use, copy, modify, and distribute this software for
@@ -29,31 +28,106 @@
 # For:       MPlayer
 # Descr:     a movie player for LINUX
 # URL:       http://www.mplayerhq.hu/
+# Needs:     
+# Changelog:
+# 1.0rc1-1:   05/Nov/2006 by Eric Hameleers <alien@slackware.com>
+#            * Initial build.
+# 1.0rc1-2:   07/Nov/2006 by Eric Hameleers <alien@slackware.com>
+#            * Removed MPlayer's internal libdvdcss code from the build, so
+#              that MPlayer no longer plays encrypted DVD's by default (and the
+#              package is now safe to upload to public repositories).
+#              If it is allowed in your country, you can either install
+#              libdvdcss (which is picked up automatically by MPlayer), or
+#              rebuild MPlayer yourself using this SlackBuild - and set the
+#              variable REMOVECSS="no" first (see further down).
+#              Use this commandline if you can't or won't modify the script:
+#                REMOVECSS="no" ./MPlayer.SlackBuild
+# 1.0rc1-3:   08/Nov/2006 by Eric Hameleers <alien@slackware.com>
+#             * Install the mplayer.conf into correct location '/etc/mplayer/'
+# 1.0rc1-4:   15/mar/2007 by Eric Hameleers <alien@slackware.com>
+#             * Differentiate between versions of X11 (modular X has another
+#               install-prefix); update default skin; enable mplayer menu;
+#               add security fix
+# 1.0rc1-5:   07/jun/2007 by Eric Hameleers <alien@slackware.com>
+#             * Add security fix.
+# 1.0rc2-1:   09/oct/2007 by Eric Hameleers <alien@slackware.com>
+#             * New version.
+# 1.0rc2-2:   01/feb/2008 by Eric Hameleers <alien@slackware.com>
+#             * Apply 4 security fixes.
+# 1.0rc2-3:   10/mar/2008 by Eric Hameleers <alien@slackware.com>
+#             * Apply a patch that allows compilation against the ivtv driver
+#               in the 2.6.24.x kernels.
+# r28148-1:   14/dec/2008 by Eric Hameleers <alien@slackware.com>
+#             * Build SVN snapshot - remove support for *all* patented or
+#               questionable software if "USE_PATENTS" is set to "NO" - think
+#               of DECSS dvd decryption code, and mp3/aac/amr audio encoders.
+# r28929-1:   10/mar/2009 by Eric Hameleers <alien@slackware.com>
+#             * Update.
+# r29301-1:   12/may/2009 by Eric Hameleers <alien@slackware.com>
+#             * Update.
+# r29301-1:   12/may/2009 by Eric Hameleers <alien@slackware.com>
+#             * Update.
+# 20100926-1: 26/sep/2010 by Eric Hameleers <alien@slackware.com>
+#             * Slackware has MPlayer now of course, but it does not hurt
+#               to have a full-featured binary package available. The 1.0rc3
+#               was released recently but I prefer to build a snapshot.
+# 20110624-1: 24/jun/2011 by Eric Hameleers <alien@slackware.com>
+#             * Provide an up-to-date snapshot to be used in conjunction
+#               with UMPlayer (a MPlayer GUI). New MPlayer source requires
+#               a separate ffmpeg download.
+# 20120514-1: 14/may/2012 by volkerdi@slackware.com
+#             * Update.
+# 1.1_20120701-1: 28/jun/2012 by alien@slackware.com
+#             * Update to the 1.1 branch (essentially this is MPlayer-1.1 but
+#               I like to check it out of SVN).
+# 
+# Run 'sh MPlayer.SlackBuild' to build a Slackware package.
+# The package (.txz) plus descriptive .txt file are created in /tmp .
+# Install using 'installpkg'. 
+#
 # -----------------------------------------------------------------------------
 
+# Set initial variables:
+
 PRGNAM=MPlayer
-VERSION=${VERSION:-20101218}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-20120701}
+BRANCH=${BRANCH:-1.1}        # leave empty if you want to build MPlayer trunk
+FFMPEG=${FFMPEG:-20120514}
+BUILD=${BUILD:-2}
 TAG=${TAG:-}
 
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
+# Show the branch version in the package name if we build from a branch:
+[ -n "$BRANCH" ] && PKGVERSION=${BRANCH}_${VERSION} || PKGVERSION=${VERSION}
+
+DOCS="AUTHORS Changelog Copyright LICENSE README VERSION DOCS/HTML DOCS/tech"
+
+# MPlayer repository characteristics:
+MPURI="svn://svn.mplayerhq.hu/mplayer/"
+if [ -n "$BRANCH" ]; then
+  MPBRANCH="branches/$BRANCH"
+else
+  MPBRANCH="trunk"
 fi
 
-DOCS="AUTHORS Changelog Copyright LICENSE README DOCS/HTML DOCS/tech"
+FFURI=git://git.videolan.org/ffmpeg.git
 
 DEFSKIN=${DEFSKIN:-"Blue"}  # Download more skins at the following url:
-SKINVER=${SKINVER:-"1.7"}   # http://www.mplayerhq.hu/design7/dload.html
+SKINVER=${SKINVER:-"1.8"}   # http://www.mplayerhq.hu/design7/dload.html
 
-# Available languages: all bg cs de dk el en es fr hu it ja
-# ko mk nb nl pl ro ru sk sv tr uk pt_BR zh_CN zh_TW
-LANGUAGES="en nl fr de es"  # The default is to just add "en" documentation
+# Available languages: all cs de en es fr hu it pl ru zh_CN
+LANGUAGES="en,de,es,fr"
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
 
 if [ "$ARCH" = "x86_64" ]; then
   LIBDIRSUFFIX="64"
@@ -69,7 +143,8 @@ else
   EXTRACONFIGUREOPTIONS=""
 fi
 
-CODECSDIR=/usr/lib${LIBDIRSUFFIX}/codecs   # Where the WIN32 codecs are expected for instance
+# Where the WIN32 codecs are expectedfor instance
+CODECSDIR=/usr/lib${LIBDIRSUFFIX}/codecs
 
 # ---------------------------------------------------------------------------
 # -- PATENT ALERT! --
@@ -79,7 +154,12 @@ CODECSDIR=/usr/lib${LIBDIRSUFFIX}/codecs   # Where the WIN32 codecs are expected
 # (needed for FLV and .3GP videos) but these libraries are 'contaminated'
 # with patents from Fraunhofer and GGP.
 # Also, the AAC encoder has patent issues.
-# The Slackware package is built with "USE_PATENTS=NO" i.e. without using
+# You can build these patended algorithms into ffmpeg, and if you are an
+# ordinary end user, no one will bother you for using them.
+# For the binaries based on this SlackBuild that I distribute, it is a
+# different story. I am not allowed to distribute binary packages that
+# incorporate patented code. So here you go. My Slackware package was
+# built with "USE_PATENTS=NO" i.e. without using
 # the lame mp3, faac, AMR and dvdcss libraries.
 # This also means that this creates a version of MPlayer that is unable
 # to play encrypted DVD's (which is most DVD's on the market). If it is
@@ -87,11 +167,6 @@ CODECSDIR=/usr/lib${LIBDIRSUFFIX}/codecs   # Where the WIN32 codecs are expected
 # Install a libdvdcss package and it will be picked up automatically by
 # MPlayer's internal libdvdread library, so that MPlayer will again be able
 # to play encrypted DVD's.
-#
-# If you have licenses to use the code, and/or the patents do not apply in
-# your region, and you take all legal responsibility, you may wish to build
-# MPlayer with the option USE_PATENTS=YES which will include potentially
-# patent-encumbered code.
 # ---------------------------------------------------------------------------
 USE_PATENTS=${USE_PATENTS:-"NO"}
 
@@ -120,6 +195,10 @@ SRCURL[0]=""
 SOURCE[1]="$SRCDIR/${DEFSKIN}-${SKINVER}.tar.bz2"
 SRCURL[1]="http://www.mplayerhq.hu/MPlayer/skins/${DEFSKIN}-${SKINVER}.tar.bz2"
 
+# Ffmpeg needs to be checked out separately now:
+SOURCE[2]="$SRCDIR/ffmpeg-${FFMPEG}.tar.xz"
+SRCURL[2]=""
+
 # Use the src_checkout() function if no downloadable tarball exists.
 # This function checks out sources from SVN/CVS and creates a tarball of them.
 src_checkout() {
@@ -137,13 +216,13 @@ src_checkout() {
   case ${1} in
   0) # mplayer
      if [ "$(echo ${VERSION}|cut -c1)" == 'r' ]; then # revision instead of date
-       REV=$(echo ${VERSION} | cut -c2-)
+       echo "Only supported VERSION is a date - yyyymmdd - or 'HEAD'"
      else
        REV="{${VERSION}}"
      fi
      mkdir MPlayer-${VERSION} \
        && cd MPlayer-${VERSION} \
-       && svn checkout  --revision $REV svn://svn.mplayerhq.hu/mplayer/trunk . \
+       && svn checkout --revision $REV ${MPURI}/${MPBRANCH} . \
        && svn propget svn:externals | sed -e 's/[[:space:]].*$//g' | xargs svn up --revision $REV \
        && find . -type d -name '.svn' -depth | xargs rm -rf \
        && ([ "$USE_PATENTS" != "YES" ] && rm -rf libdvdcss || true) \
@@ -152,6 +231,28 @@ src_checkout() {
        && tar -${TARCOMP}cf ${2} MPlayer-${VERSION}
      rm -rf MPlayer-${VERSION}
      ;;
+  2) # ffmpeg-${FFMPEG}
+     mkdir ffmpeg_temp_checkout_$$ \
+       && cd ffmpeg_temp_checkout_$$
+       if [ "$FFMPEG" = "HEAD" ]; then
+         # Checkout without downloading version history (fast!):
+         echo "Checking out HEAD from '$FFURI':"
+         git clone --depth=1 ${FFURI} ffmpeg
+       else
+         # Checkout code from a certain branch and/or date; this will take a
+         # long time because we have to clone the complete git-repository first:
+         echo "Checking out branch 'master' at date $FFMPEG from '$FFURI':"
+         git clone ${FFURI} ffmpeg \
+         && cd ffmpeg \
+         && git checkout master \
+         && git checkout $(git rev-list -n 1 --before="`date -d $FFMPEG`" master) \
+         && cd ..
+       fi
+       chown -R root:root . \
+       && tar --exclude .git -${TARCOMP}cf ${2} ffmpeg
+     cd ..
+     rm -rf ffmpeg_temp_checkout_$$
+     ;;
   *) # Do nothing
      ;;
   esac
@@ -221,32 +322,36 @@ echo "++"
 if [ "$USE_PATENTS" != "YES" ]; then
   cat <<"EOT"
 **
-** Removing internal DeCSS library.
+** Removing internal DECSS library.
 ** If you want to play encrypted DVD's you need to install libdvdcss separately.
-** You take full legal responsibility for any use of DeCSS.  We neither supply
-** DeCSS code nor endorse any illegal use of it.
 **
-** If you are unaffected by patent concerns because you hold the required
-** licenses and permission to use the patented code, or reside in a
-** location where this is not a concern, and wish to include the patented
-** and restricted code (you take all legal responsibility for doing so),
-** then edit this SlackBuild script and change the line:
+** If you do not want to remove libdvdcss, then
+** edit this SlackBuild script and change the line:
 ** USE_PATENTS=${USE_PATENTS:-"NO"}
 ** to:
 ** USE_PATENTS="YES"
 **
 EOT
-  sleep 5
+  sleep 2
 fi
 
 cd $TMP/tmp-$PRGNAM
 echo "Extracting the source archive(s) for $PRGNAM..."
 tar -xvf ${SOURCE[0]}
-[ "$USE_PATENTS" != "YES" ] && rm -rf libdvdcss
+# Extract the ffmpeg source inside the MPlayer directory:
+( cd ${PRGNAM}-${VERSION} && tar -xvf ${SOURCE[2]} )
+
 chown -R root:root *
-chmod -R u+w,go+r-w,a-s *
+chmod -R u+w,go+r-w,a+X-s *
 cd ${PRGNAM}-${VERSION}
 
+# Prevent a compilation error:
+# "libm.h:54:74: error: expected identifier or '(' before 'sizeof'"
+# See also:
+# http://lists.mplayerhq.hu/pipermail/mplayer-users/2012-June/084871.html
+cat $SRCDIR/MPlayer_ffmpeg.patch | patch -p0 --verbose \
+  2>&1 | tee $OUTPUT/patch-${PRGNAM}.log
+
 # Determine what X we're running (the modular X returns the prefix
 # in the next command, while older versions stay silent):
 XPREF=$(pkg-config --variable=prefix x11) || true
@@ -256,7 +361,6 @@ XPREF=$(pkg-config --variable=prefix x11) || true
 if [ "$USE_PATENTS" != "YES" ]; then
   DO_PATENTED="--disable-libdvdcss-internal \
                --disable-mp3lame --disable-mp3lame-lavc \
-               --disable-faac --disable-faac-lavc \
                --disable-libopencore_amrnb \
                --disable-libopencore_amrwb"
 else
@@ -265,30 +369,37 @@ fi
 
 echo Building ...
 # MPlayer wants to automatically determine compiler flags,
-# so we don't provide CFLAGS:
-./configure --prefix=/usr \
-            --mandir=/usr/man \
-            --confdir=/etc/mplayer \
-            --enable-gui \
-            --enable-menu \
-            --enable-largefiles \
-            --disable-arts \
-            --codecsdir=${CODECSDIR} \
-            --language="${LANGUAGES}" \
-            ${EXTRACONFIGUREOPTIONS} \
-            ${DO_PATENTED} \
-            2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
+# so we don't provide CFLAGS.
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --confdir=/etc/mplayer \
+  --enable-gui \
+  --enable-menu \
+  --disable-arts \
+  --disable-bitmap-font \
+  --codecsdir=${CODECSDIR} \
+  --language="${LANGUAGES}" \
+  ${EXTRACONFIGUREOPTIONS} \
+  ${DO_PATENTED} \
+  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
 # So that MPlayer does not report "UNKNOWN" as it's version:
-echo $VERSION > VERSION
+if [ ! -f VERSION ]; then
+  echo $VERSION > VERSION
+fi
 make 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
 make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log
 
 # Build the html documentation (not all languages are available):
-( cd DOCS/xml
+if [ "$LANGUAGES" = "all" ]; then
+  # make html-chunked
+  make html-single
+else
   for i in $(echo $LANGUAGES | tr , ' ') ; do 
-    [ -d $i ] && make html-single-$i ;
+    # make html-chunked-$i ;
+    make html-single-$i ;
   done
-)
+fi
 
 # Prepare the configfile:
 mkdir -p $PKG/etc/mplayer
@@ -298,12 +409,12 @@ cp etc/example.conf $PKG/etc/mplayer/mplayer.conf.new
 cd $PKG/usr/share/mplayer/skins
 tar -xvf ${SOURCE[1]}
 chown -R root:root *
-chmod -R u+w,go+r-w,a-s *
+chmod -R u+w,go+r-w,a+X-s *
 ln -s ${DEFSKIN} default
 cd -
 
 # Add this to the doinst.sh:
-! [ -d $PKG/install ] && mkdir -p $PKG/install
+mkdir -p $PKG/install
 cat <<EOINS >> $PKG/install/doinst.sh
 # Handle the incoming configuration files:
 config() {
@@ -338,32 +449,39 @@ fi
 # Prepare the new configuration file
 config etc/mplayer/mplayer.conf.new
 
-if [ -x /usr/bin/update-desktop-database ]; then
-  chroot . /usr/bin/update-desktop-database -q usr/share/applications
+# Update the desktop database:
+if [ -x usr/bin/update-desktop-database ]; then
+  chroot . /usr/bin/update-desktop-database usr/share/applications 1> /dev/null 2> /dev/null
 fi
 
+# Update hicolor theme cache:
 if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
   if [ -x usr/bin/gtk-update-icon-cache ]; then
-    chroot . /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+    chroot . /usr/bin/gtk-update-icon-cache /usr/share/icons/hicolor >/dev/null 2>&1
   fi
 fi
 
+# Update the mime database:
+if [ -x usr/bin/update-mime-database ]; then
+  chroot . /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
 EOINS
 
 # Add documentation:
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
-cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-#mv $PKG/usr/doc/$PRGNAM-$VERSION/HTML-single $PKG/usr/doc/$PRGNAM-$VERSION/html
+mkdir -p $PKG/usr/doc/$PRGNAM-$PKGVERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$PKGVERSION || true
+cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$PKGVERSION/$PRGNAM.SlackBuild
+mv $PKG/usr/doc/$PRGNAM-$PKGVERSION/HTML $PKG/usr/doc/$PRGNAM-$PKGVERSION/html
 # Save a sample of all configuration files:
 for i in etc/*.conf ; do
-  cp $i $PKG/usr/doc/$PRGNAM-$VERSION/$(basename $i)-sample
+  cp $i $PKG/usr/doc/$PRGNAM-$PKGVERSION/$(basename $i)-sample
 done
 # Save a transcript of all configured options for this specific build:
 if [ -n $OUTPUT/configure-${PRGNAM}.log ]; then
   cat $OUTPUT/configure-${PRGNAM}.log \
     | sed -n "/^Config files successfully generated/,/^'config.h' and 'config.mak' contain your configuration options./p" \
-    > $PKG/usr/doc/$PRGNAM-$VERSION/${PRGNAM}.configuration
+    > $PKG/usr/doc/$PRGNAM-$PKGVERSION/${PRGNAM}.configuration
 fi
 find $PKG/usr/doc -type f -exec chmod 644 {} \;
 
@@ -386,11 +504,11 @@ fi
 
 # Build the package:
 cd $PKG
-makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${PKGVERSION}-${ARCH}-${BUILD}${TAG}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
 cd $OUTPUT
-md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz.md5
+md5sum ${PRGNAM}-${PKGVERSION}-${ARCH}-${BUILD}${TAG}.txz > ${PRGNAM}-${PKGVERSION}-${ARCH}-${BUILD}${TAG}.txz.md5
 cd -
-cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${PKGVERSION}-${ARCH}-${BUILD}${TAG}.txt
 
 # Warn about libdvdcss requirement (again):
 if [ "$USE_PATENTS" != "YES" ]; then
@@ -398,14 +516,10 @@ if [ "$USE_PATENTS" != "YES" ]; then
 **
 ** Internal DECSS library was not built.
 ** If you want to play encrypted DVD's you need to install libdvdcss separately.
-** You take full legal responsibility for any use of DeCSS.  We neither supply
-** DeCSS code nor endorse any illegal use of it.
 **
-** If you are unaffected by patent concerns because you hold the required
-** licenses and permission to use the patented code, or reside in a
-** location where this is not a concern, and wish to include the patented
-** and restricted code (you take all legal responsibility for doing so),
-** then edit this SlackBuild script and change the line:
+** If you do not care about patent issues,
+** and want to keep support for internal libdvdcss, then
+** edit this SlackBuild script and change the line:
 ** USE_PATENTS=${USE_PATENTS:-"NO"}
 ** to:
 ** USE_PATENTS="YES"
diff --git a/source/xap/MPlayer/slack-desc b/source/xap/MPlayer/slack-desc
index a73feb27..71686a3c 100644
--- a/source/xap/MPlayer/slack-desc
+++ b/source/xap/MPlayer/slack-desc
@@ -6,14 +6,15 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-MPlayer: MPlayer (media player)
-MPlayer:
-MPlayer: MPlayer is a movie player.  It plays most MPEG/VOB, AVI, Ogg/OGM,
-MPlayer: VIVO, ASF/WMA/WMV, QT/MOV/MP4, RealMedia, Matroska, NUT, NuppelVideo,
-MPlayer: FLI, YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim,
-MPlayer: and Win32 DLL codecs.  You can watch VideoCD, SVCD, DVD, 3ivx,
-MPlayer: DivX 3/4/5, WMV and even H.264 movies.
-MPlayer:
-MPlayer: Homepage for MPlayer is http://www.mplayerhq.hu/
+MPlayer: MPlayer (MPEG-4 digital video technology)
 MPlayer:
+MPlayer: MPlayer is a movie player for LINUX. It plays most MPEG, VOB, AVI,
+MPlayer: Ogg/OGM, VIVO, ASF/WMA/WMV, QT/MOV/MP4, FLI, RM, NuppelVideo,
+MPlayer: YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim,
+MPlayer: and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx,
+MPlayer: DivX 3/4/5 and even WMV movies, too (without the avifile library).
+MPlayer: MPlayer supports 10 types of subtitles formats: VobSub,
+MPlayer: MicroDVD, SubRip, SubViewer, Sami, VPlayer, RT, SSA, AQTitle, MPsub.
 MPlayer:
+MPlayer: Homepage for MPLayer is http://www.mplayerhq.hu/
+
diff --git a/source/xap/audacious-plugins/audacious-plugins.SlackBuild b/source/xap/audacious-plugins/audacious-plugins.SlackBuild
index 50274f1f..20139dff 100755
--- a/source/xap/audacious-plugins/audacious-plugins.SlackBuild
+++ b/source/xap/audacious-plugins/audacious-plugins.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -66,8 +66,6 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
-zcat $CWD/audacious-plugins.alsa.noise.is.not.helpful.diff.gz | patch -p1 --verbose || exit 1
-
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
@@ -84,9 +82,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --mandir=/usr/man \
-  --enable-chardet \
   --enable-amidiplug \
-  --disable-altivec \
   --program-prefix= \
   --program-suffix= \
   ${ARCHOPTS} \
@@ -129,6 +125,14 @@ cp -a \
   AUTHORS COPYING INSTALL Mercurial-Access README* \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/xap/audacious-plugins/audacious-plugins.alsa.noise.is.not.helpful.diff b/source/xap/audacious-plugins/audacious-plugins.alsa.noise.is.not.helpful.diff
deleted file mode 100644
index e904ab8d..00000000
--- a/source/xap/audacious-plugins/audacious-plugins.alsa.noise.is.not.helpful.diff
+++ /dev/null
@@ -1,25 +0,0 @@
---- ./src/alsa/alsa.c.orig	2011-02-22 11:29:46.000000000 -0600
-+++ ./src/alsa/alsa.c	2011-03-11 15:02:53.340999637 -0600
-@@ -207,10 +207,20 @@
-             static gboolean warned = FALSE;
-             if (! warned)
-             {
--                fprintf (stderr, "\n** WARNING **\nAudacious has detected that "
-+                /* fprintf (stderr, "\n** WARNING **\nAudacious has detected that "
-                  "your ALSA device has a broken timer.  A workaround\nis being "
-                  "used to prevent CPU overload.  Please report this problem to "
--                 "your\nLinux distributor or to the ALSA developers.\n\n");
-+                 "your\nLinux distributor or to the ALSA developers.\n\n"); */
-+                  /* ^^^ COMMENTED OUT ^^^ */
-+
-+                /* I'm glad there is a workaround for this, and the reports
-+                   are that it works, so spamming the console about it seems
-+                   a little bit extreme.  It's not an issue to be solved here
-+                   by Slackware, and I would be surprised if the ALSA
-+                   developers did not know by now, given this warning.
-+                   FWIW, this seems a strange method of communicating with the
-+                   ALSA developers.  Did they report the bug to them? */
-+
-                 warned = TRUE;
-             }
- 
diff --git a/source/xap/audacious/audacious.SlackBuild b/source/xap/audacious/audacious.SlackBuild
index 4a651490..66bb0f90 100755
--- a/source/xap/audacious/audacious.SlackBuild
+++ b/source/xap/audacious/audacious.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006-2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=audacious
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -87,22 +87,22 @@ CFLAGS="$SLKCFLAGS" \
   --sysconfdir=/etc \
   --mandir=/usr/man \
   --docdir=/usr/doc/${PKGNAM}-$VERSION \
-  --disable-altivec \
   --program-prefix= \
   --program-suffix= \
   ${ARCHOPTS} \
-  --build=$ARCH-slackware-linux
+  --with-buildstamp=$ARCH-slackware-linux \
+  --build=$ARCH-slackware-linux || exit 1
 
 # Build and install:
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Fix broken symlinks pointing into the build directory
-( cd $PKG/usr/bin
-  rm -f audacious audtool
-  ln -s audacious2 audacious
-  ln -s audtool2 audtool
-)
+#( cd $PKG/usr/bin
+#  rm -f audacious audtool
+#  ln -s audacious2 audacious
+#  ln -s audtool2 audtool
+#)
 
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
@@ -137,6 +137,14 @@ cp -a \
   AUTHORS COPYING INSTALL Mercurial-Access NEWS README doc/* \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/xap/blackbox/blackbox.SlackBuild b/source/xap/blackbox/blackbox.SlackBuild
index af000496..c7051217 100755
--- a/source/xap/blackbox/blackbox.SlackBuild
+++ b/source/xap/blackbox/blackbox.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -26,9 +26,8 @@
 PKGNAM=blackbox
 VERSION=${VERSION:-0.70.1}
 BBKEYSVER=${BBKEYSVER:-0.9.1}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-7}
 NUMJOBS=${NUMJOBS:-" -j7 "}
-PKGEXT=${PKGEXT:-txz}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -85,6 +84,9 @@ find . \
 # Build fix for gcc-4:
 zcat $CWD/blackbox-0.70.1-gcc-4.3.patch.gz | patch --verbose -p1 || exit 1
 
+# Build fix for libX11-1.5+
+zcat $CWD/textpropertytostring-unconditional.diff.gz | patch --verbose -p1 || exit 1
+
 # Configure:
 CFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -112,6 +114,8 @@ make install DESTDIR=$PKG || exit 1
 mkdir -p $PKG/etc/X11/xinit
 zcat $CWD/xinitrc.blackbox.gz > $PKG/etc/X11/xinit/xinitrc.blackbox
 chmod 755 $PKG/etc/X11/xinit/xinitrc.blackbox
+zcat $CWD/startblackbox.gz > $PKG/usr/bin/startblackbox
+chmod 755 $PKG/usr/bin/startblackbox
 
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
@@ -194,4 +198,4 @@ mkdir -p $PKG/install
 install -vpm644 $CWD/slack-desc $PKG/install/
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.$PKGEXT
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xap/blackbox/startblackbox b/source/xap/blackbox/startblackbox
new file mode 100644
index 00000000..e72bbd3f
--- /dev/null
+++ b/source/xap/blackbox/startblackbox
@@ -0,0 +1,23 @@
+#!/bin/sh
+#  startblackbox v1.0
+
+########################################################################
+##  Start DBUS session bus                                            ##
+########################################################################
+
+
+if [ -z "$DBUS_SESSION_BUS_ADDRESS" ]; then
+   eval `dbus-launch --sh-syntax --exit-with-session`
+fi
+
+
+########################################################################
+##  Start blackbox Window Manager                                     ##
+########################################################################
+
+
+exec /usr/bin/blackbox
+
+
+########################################################################
+
diff --git a/source/xap/blackbox/textpropertytostring-unconditional.diff b/source/xap/blackbox/textpropertytostring-unconditional.diff
new file mode 100644
index 00000000..ed320388
--- /dev/null
+++ b/source/xap/blackbox/textpropertytostring-unconditional.diff
@@ -0,0 +1,28 @@
+Description: Declare bt::textPropertyToString unconditionally.
+Author: Jakub Wilk <jwilk@debian.org>
+Forwarded: no
+Bug-Debian: http://bugs.debian.org/614468
+Last-Update: 2011-03-12
+
+--- a/lib/Util.hh
++++ b/lib/Util.hh
+@@ -25,6 +25,8 @@
+ #ifndef __Util_hh
+ #define __Util_hh
+ 
++#include <X11/Xutil.h>
++
+ #include <limits.h>
+ #include <string>
+ 
+@@ -94,10 +96,8 @@
+ 
+   std::string tolower(const std::string &string);
+ 
+-#ifdef _XUTIL_H_
+   std::string textPropertyToString(::Display *display,
+                                    ::XTextProperty& text_prop);
+-#endif
+ 
+ } // namespace bt
+ 
diff --git a/source/xap/blackbox/xinitrc.blackbox b/source/xap/blackbox/xinitrc.blackbox
index 58bd9259..d6ddca3e 100644
--- a/source/xap/blackbox/xinitrc.blackbox
+++ b/source/xap/blackbox/xinitrc.blackbox
@@ -26,7 +26,7 @@ fi
 
 # Start the window manager:
 if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
-  exec ck-launch-session /usr/bin/blackbox
+  exec ck-launch-session /usr/bin/startblackbox
 else
-  exec /usr/bin/blackbox
+  exec /usr/bin/startblackbox
 fi
diff --git a/source/xap/blueman/blueman.SlackBuild b/source/xap/blueman/blueman.SlackBuild
index 737dae98..f47aabb6 100755
--- a/source/xap/blueman/blueman.SlackBuild
+++ b/source/xap/blueman/blueman.SlackBuild
@@ -25,7 +25,7 @@
 
 PKGNAM=blueman
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/fluxbox/fluxbox.SlackBuild b/source/xap/fluxbox/fluxbox.SlackBuild
index 2be30410..52864abb 100755
--- a/source/xap/fluxbox/fluxbox.SlackBuild
+++ b/source/xap/fluxbox/fluxbox.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 PKGNAM=fluxbox
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-4}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -59,6 +59,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 
 cd $TMP
+rm -rf fluxbox-$VERSION
 tar xvf $CWD/fluxbox-$VERSION.tar.?z* || exit 1
 cd fluxbox-$VERSION || exit 1
 chown -R root:root .
@@ -68,6 +69,9 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
+# Make sure that dbus-launch is started for the session:
+zcat $CWD/fluxbox.startfluxbox.dbus.diff.gz | patch -p1 --verbose || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -87,7 +91,20 @@ make install DESTDIR=$PKG || exit 1
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-gzip -9 $PKG/usr/man/man?/*
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/etc/X11/xinit
 zcat $CWD/xinitrc.fluxbox.gz > $PKG/etc/X11/xinit/xinitrc.fluxbox
diff --git a/source/xap/fluxbox/fluxbox.startfluxbox.dbus.diff b/source/xap/fluxbox/fluxbox.startfluxbox.dbus.diff
new file mode 100644
index 00000000..71bea31d
--- /dev/null
+++ b/source/xap/fluxbox/fluxbox.startfluxbox.dbus.diff
@@ -0,0 +1,14 @@
+--- ./util/startfluxbox.in.orig	2011-10-29 08:46:15.000000000 -0500
++++ ./util/startfluxbox.in	2012-08-08 23:35:10.841041336 -0500
+@@ -50,6 +50,11 @@
+ # wmsmixer -w &
+ # idesk &
+ 
++# Start DBUS session bus:
++if [ -z "\$DBUS_SESSION_BUS_ADDRESS" ]; then
++   eval \$(dbus-launch --sh-syntax --exit-with-session)
++fi
++
+ # And last but not least we start fluxbox.
+ # Because it is the last app you have to run it with ''exec'' before it.
+ 
diff --git a/source/xap/fluxbox/xinitrc.fluxbox b/source/xap/fluxbox/xinitrc.fluxbox
index 62e425b3..fd08cbc2 100644
--- a/source/xap/fluxbox/xinitrc.fluxbox
+++ b/source/xap/fluxbox/xinitrc.fluxbox
@@ -30,3 +30,4 @@ if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
 else
   exec /usr/bin/startfluxbox
 fi
+
diff --git a/source/xap/fvwm/doinst.sh b/source/xap/fvwm/doinst.sh
index 57a23d6f..087da9e3 100644
--- a/source/xap/fvwm/doinst.sh
+++ b/source/xap/fvwm/doinst.sh
@@ -10,4 +10,5 @@ config() {
   fi
   # Otherwise, we leave the .new copy for the admin to consider...
 }
-config etc/X11/fvwm2/system.fvwm2rc.new
+# Might need this later
+#config etc/X11/fvwm2/system.fvwm2rc.new
diff --git a/source/xap/fvwm/fvwm.SlackBuild b/source/xap/fvwm/fvwm.SlackBuild
index 7906a473..b04223c7 100755
--- a/source/xap/fvwm/fvwm.SlackBuild
+++ b/source/xap/fvwm/fvwm.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,10 +22,8 @@
 
 
 PKGNAM=fvwm
-VERSION=${VERSION:-2.4.20}
-BUILD=${BUILD:-2}
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -37,6 +35,8 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -46,20 +46,22 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
+PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
-cd $TMP
-rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
-cd ${PKGNAM}-$VERSION || exit 1
 
-# Make sure ownerships and permissions are sane:
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -67,36 +69,37 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Configure:
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
-  --sysconfdir=/etc/X11/fvwm2 \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
   --mandir=/usr/man \
-  --enable-multibyte \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-bidi \
   --program-prefix= \
   --program-suffix= \
-  --enable-extras \
   --build=$ARCH-slackware-linux
 
-# Build and install:
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Add some ancient icons:
+# Add some ancient icons.  The fvwm95 sample config still uses these.
 ( cd $PKG ; tar xzf $CWD/ancient-icons.tar.gz )
 
+# This script is called from the xinitrc:
+zcat $CWD/startfvwm2.gz > $PKG/usr/bin/startfvwm2
+chmod 755 $PKG/usr/bin/startfvwm2
+
+# This stuff appears to be misplaced junk:
+rm -rf $PKG/usr/share/doc
+
 # Add a few more things:
 mkdir -p $PKG/etc/X11/xinit
 zcat $CWD/xinitrc.fvwm2.gz > $PKG/etc/X11/xinit/xinitrc.fvwm2
 chmod 755 $PKG/etc/X11/xinit/xinitrc.fvwm2
-mkdir -p $PKG/etc/X11/fvwm2
-zcat $CWD/system.fvwm2rc.gz > $PKG/etc/X11/fvwm2/system.fvwm2rc.new
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/X11
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/X11 && rm -rf fvwm2 )
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/X11 && ln -sf ../../../etc/X11/fvwm2 fvwm2 )
+#zcat $CWD/system.fvwm2rc.gz > $PKG/etc/system.fvwm2rc.new
 
-# Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
@@ -109,27 +112,30 @@ if [ -d $PKG/usr/man ]; then
           ln -s $( readlink $eachpage ).gz $eachpage.gz
           rm $eachpage
         done
-        gzip -9 *.*
+        gzip -9 *.?
       )
     done
   )
 fi
 
-# Add a documentation directory:
-mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+# Install some documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  AUTHORS COPYING INSTALL INSTALL.fvwm NEWS README \
-  $PKG/usr/doc/${PKGNAM}-$VERSION
-( cd docs
-  cp -a \
-    ANNOUNCE BUGS DEVELOPERS FAQ TODO color_combos error_codes fvwm.lsm m4_hacks \
-    $PKG/usr/doc/${PKGNAM}-$VERSION
-)
+  AUTHORS COPYING* NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
 
 mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
 
diff --git a/source/xap/fvwm/fvwm.colormap.diff b/source/xap/fvwm/fvwm.colormap.diff
deleted file mode 100644
index 2d2eac94..00000000
--- a/source/xap/fvwm/fvwm.colormap.diff
+++ /dev/null
@@ -1,20 +0,0 @@
---- ./fvwm/colormaps.c.orig	Mon Sep 13 14:10:25 1999
-+++ ./fvwm/colormaps.c	Mon Sep 13 14:12:03 1999
-@@ -90,10 +90,13 @@
-   /* Reinstall the colormap that we think should be installed,
-    * UNLESS and unrecognized window has the focus - it might be
-    * an override-redirect window that has its own colormap. */
--  if((ReInstall)&&(Scr.UnknownWinFocused == None))
--    {
--      XInstallColormap(dpy,last_cmap);
--    }
-+  /* Commented out, since although this behavior is an X standard, it breaks
-+   * xlockmore and some other nifty programs, and having it this way doesn't
-+   * cause any problems that I'm aware of. */
-+  /* if((ReInstall)&&(Scr.UnknownWinFocused == None)) */
-+  /*  { */
-+  /*    XInstallColormap(dpy,last_cmap); */
-+  /*  } */
- }
- 
- /************************************************************************
diff --git a/source/xap/fvwm/slack-desc b/source/xap/fvwm/slack-desc
index 77995d92..2d2a9ef5 100644
--- a/source/xap/fvwm/slack-desc
+++ b/source/xap/fvwm/slack-desc
@@ -13,7 +13,7 @@ fvwm: X11.  It is a derivative of twm, redesigned to minimize memory
 fvwm: consumption, provide a 3-D look to window frames, and provide a simple
 fvwm: virtual desktop.
 fvwm:
-fvwm:
+fvwm: Homepage:  http://www.fvwm.org
 fvwm:
 fvwm:
 fvwm:
diff --git a/source/xap/fvwm/startfvwm2 b/source/xap/fvwm/startfvwm2
new file mode 100644
index 00000000..b9d001d1
--- /dev/null
+++ b/source/xap/fvwm/startfvwm2
@@ -0,0 +1,23 @@
+#!/bin/sh
+#  startfvwm2 v1.0
+
+########################################################################
+##  Start DBUS session bus                                            ##
+########################################################################
+
+
+if [ -z "$DBUS_SESSION_BUS_ADDRESS" ]; then
+   eval $(dbus-launch --sh-syntax --exit-with-session)
+fi
+
+
+########################################################################
+##  Start fvwm2 Window Manager                                        ##
+########################################################################
+
+
+exec /usr/bin/fvwm2
+
+
+########################################################################
+
diff --git a/source/xap/fvwm/system.fvwm2rc b/source/xap/fvwm/system.fvwm2rc
deleted file mode 100644
index 863643a4..00000000
--- a/source/xap/fvwm/system.fvwm2rc
+++ /dev/null
@@ -1,822 +0,0 @@
-#
-# Default system.fvwm2rc for Slackware Linux, adapted from the version
-# for fvwm95 (i.e. beware of non-functional commented-out options)
-#
-
-#========================================================================#
-
-#
-# Fonts - one for window titles, another for icons, and another for the menus
-#
-WindowFont	-adobe-helvetica-bold-r-*-*-12-*-*-*-*-*-*-*
-IconFont	fixed
-MenuStyle black grey76 grey30 -adobe-helvetica-medium-r-*-*-*-120-*-*-*-*-*-* fvwm
-
-#
-# Set the default window colors. The syntax is:
-#  DefaultColors winforecolor winbackcolor titleforecolor titlebackcolor
-# where:
-#  winbackcolor    is the background (border) color of all windows,
-#                  including the menu windows 
-#  winforecolor    is used for the menu text
-#  titlebackcolor  is the background color used for title bars of 
-#                  non selected windows
-#  titleforecolor  is the color of the title text of non selected windows
-#
-#DefaultColors   Black #c3c3c3 #c3c3c3 grey51
-
-#
-# Text and background color for the title bar of the active (selected) window
-#
-#HilightColors   White #000080
-
-#
-# Text and background color for the title bar of sticky windows
-#
-#StickyColors    grey51 #60c080
-
-# You can also use the Style command to set the colors of individual
-# title bars of some non-selected windows
-
-#Style "*" ForeColor #c3c3c3
-#Style "*" BackColor grey51
-
-#========================================================================#
-
-#
-# Set up the major operating modes
-#
-
-# Let's comment this out and be more UNIX-like :^)
-# Style "*" ClickToFocus
-# If we use the FvwmTaskBar we don't need the icons :-)
-# Style "..." Icon is also commented below.
-Style "*" NoIcon
-Style "*" MWMFunctions
-Style "*" HintOverride
-Style "*" MWMDecor
-
-OpaqueMoveSize 100
-EdgeScroll 100 100
-EdgeResistance 10000 0
-
-#
-# RandomPlacement prevents user interaction while placing windows:
-#
-Style "*" RandomPlacement
-
-#
-# NoPPosition instructs fvwm to ignore the PPosition field in window 
-# geometry hints. Emacs annoyingly sets PPosition to (0,0)!
-#
-Style "*" NoPPosition
-
-#========================================================================#
-
-#
-# Set the desk top size in units of physical screen size
-#
-DeskTopSize 3x2
-
-#========================================================================#
-
-# Set the decoration styles and window options
-# Order is important!!!!
-# If compatible styles are set for a single window in multiple Style
-# commands, then the styles are ORed together. If conflicting styles
-# are set, the last one specified is used.
-
-# These commands should command before any menus or functions are defined,
-# and before the internal pager is started.
-
-#
-# Default border and handle widths
-#
-Style "*" BorderWidth 5, HandleWidth 5
-
-Style "Fvwm*"        NoTitle, Sticky, WindowListSkip
-Style "Fvwm Pager"   StaysOnTop, NoHandles
-Style "FvwmBanner"   StaysOnTop
-Style "FvwmButtons"  NoTitle, NoHandles, Sticky, WindowListSkip,BorderWidth 5
-Style "*lock"        NoTitle, NoHandles, Sticky, WindowListSkip
-Style "xbiff"        NoTitle,            Sticky, WindowListSkip
-
-#
-# Some mini-icons for the title bar
-#
-#Style "*"         TitleIcon mini-x2.xpm
-#Style "*xterm*"   TitleIcon mini-term.xpm
-#Style "rxvt"      TitleIcon mini-term.xpm
-#Style "xcalc"     TitleIcon mini-calc.xpm
-#Style "xsession"  TitleIcon mini-bx2.xpm
-#Style "xv"        TitleIcon mini-xv.xpm
-#Style "SeaMonkey"  TitleIcon mini-nscape.xpm
-#Style "xmag"      TitleIcon mini-zoom.xpm
-#Style "textedit"  TitleIcon mini-edit.xpm
-#Style "tkps"      TitleIcon mini-run.xpm
-#Style "Ghostview" TitleIcon mini-gv.xpm
-#Style "Xcolorsel" TitleIcon mini-colors.xpm
-#Style "IDL*"      TitleIcon mini-zoom.xpm
-#Style "xeyes"     TitleIcon mini-eyes.xpm
-#Style "*fm*"      TitleIcon mini-filemgr.xpm
-# xman resource names
-#Style "topBox"    TitleIcon mini-book1.xpm
-#Style "help"      TitleIcon mini-book2.xpm
-#Style "manualBrowser" TitleIcon mini-book2.xpm
-# xpaint resource names
-#Style "xpaint"    TitleIcon mini-paint.xpm
-#Style "Canvas"    TitleIcon mini-paint.xpm
-#Style "fatbits"   TitleIcon mini-paint.xpm
-#Style "filebrowser" TitleIcon mini-paint.xpm
-
-#Style "rxvt"       Icon  term.xpm
-#Style "xterm"      Icon xterm.xpm
-#Style "Appointment" Icon datebook.xpm
-#Style "xcalc"      Icon rcalc.xpm
-#Style "xbiff"      Icon mail1.xpm
-#Style "xmh"        Icon mail1.xpm, StartsOnDesk 2
-#Style "xman"	   Icon xman.xpm
-#Style "xvgr"	   Icon graphs.xpm
-#Style "matlab"	   Icon math4.xpm
-#Style "xmag"	   Icon mag_glass.xpm
-#Style "xgraph"	   Icon graphs.xpm
-#Style "xv"         Icon xview.xpm
-#Style "FvwmButtons"  Icon toolbox.xpm
-#Style "xconsole"   Icon koala.xpm
-#Style "xsession"   Icon koala.xpm
-#Style "textedit"   Icon textedit.xpm
-#Style "gv"  Icon gv.xpm
-
-#========================================================================#
-
-#
-# Stuff to do at start-up
-#
-
-AddToFunc "InitFunction"
-#+                           "I" Module FvwmButtons
-+                           "I" Module FvwmButtons MiniButtons
-+                           "I" Module FvwmPager 0 0
-
-AddToFunc "RestartFunction"
-#+                           "I" Module FvwmButtons
-+                           "I" Module FvwmButtons MiniButtons
-+                           "I" Module FvwmPager 0 0
-
-#========================================================================#
-
-# Now define some handy complex functions
-
-#
-# This one moves and then raises the window if you drag the mouse,
-# only raises the window if you click, or does a full maximize if 
-# you double click
-#
-AddToFunc "Move-or-Raise" "M" Move
-+                         "M" Raise
-+                         "C" Raise
-+                         "D" Maximize 100 100
-
-#
-# This one moves and then lowers the window if you drag the mouse,
-# only lowers the window if you click, or does a RaiseLower if you double 
-# click
-#
-AddToFunc "Move-or-Lower" "M" Move
-+                         "M" Lower
-+                         "C" Lower
-+                         "D" RaiseLower
-
-#
-# This one moves or (de)iconifies:
-#
-AddToFunc "Move-or-Iconify" "M" Move
-+                           "D" Iconify
-
-#
-# This one resizes and then raises the window if you drag the mouse,
-# only raises the window if you click,  or does a RaiseLower if you double 
-# click
-#
-AddToFunc "Resize-or-Raise" "M" Resize
-+                           "M" Raise
-+                           "C" Raise
-+                           "D" RaiseLower
-
-
-#========================================================================#
-
-#
-# Now define the menus - defer bindings until later
-#
-
-# This is for the Start menu of the FvwmTaskBar
-
-DestroyMenu "StartMenu"
-AddToMenu "StartMenu"
-+ "Manual Pages     %mini-book1.xpm%"       Exec    xman &
-+ "Magnifying Glass %mini-zoom.xpm%" 	    Exec    xmag &
-+ ""                                        Nop 
-+ "Accessories%mini-hammer.xpm%"            Popup   Accessories
-+ "Applications     %mini-x2.xpm%"          Popup   Applications
-+ "File Managers    %mini-filemgr.xpm%"     Popup   Filemanagers
-+ "Games            %mini-happy.xpm%"       Popup   Games
-+ "Shells           %mini-term.xpm"         Popup   Shells
-+ ""                                        Nop 
-+ "Lock Screen      %mini-lock.xpm%"        Popup   Screenlock
-+ "Screensaver      %mini-display.xpm%"     Popup   Screensaver
-+ ""                                        Nop
-+ "Refresh Screen   %mini-ray.xpm%"         Refresh
-+ ""                                        Nop
-+ "Exit Fvwm2       %mini-stop.xpm%"        Popup   Quit-Verify
-
-DestroyMenu "Shells"
-AddToMenu "Shells"
-+ "Xterm	(7x14 font)%mini-term.xpm%" 		Exec xterm -sb -sl 500 -j -ls -fn 7x14 -fb 7x14bold &
-+ "Large Xterm	(10x20 font)%mini-term.xpm%" 	Exec xterm -sb -sl 500 -j -ls -fn 10x20 &
-+ ""					    	Nop
-+ "Rxvt	(7x14 font)%mini-term.xpm%"		Exec rxvt -font 7x14 -ls &
-+ "Large Rxvt	(10x20 font)%mini-term.xpm%" 	Exec rxvt -font 10x20 -ls &
-
-DestroyMenu "Screensaver"
-AddToMenu "Screensaver"
-+ "Blank%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode blank &
-+ "Random%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode random &
-+ ""				Nop
-+ "Ant%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode ant &
-+ "Ball%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode ball &
-+ "Bat%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode bat &
-+ "Blot%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode blot &
-+ "Bomb%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode bomb &
-+ "Bouboule%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode bouboule &
-#+ "Bob%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode image -bitmap /usr/include/X11/bitmaps/l-bob.xbm -batchcount 7 &
-#+ "Bounce%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode bounce &
-+ "\"Bob\"%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode bounce &
-+ "Braid%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode braid &
-+ "Bug%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode bug &
-+ "Bubble%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode bubble &
-+ "Clock%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode clock &
-+ "Coral%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode coral &
-+ "Crystal%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode crystal &
-+ "Daisy%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode daisy &
-+ "Dclock%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode dclock &
-+ "Deco%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode deco &
-+ "Demon%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode demon &
-+ "Dilemma%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode dilemma &
-+ "Drift%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode drift &
-+ "More"                        PopUp ScreenSaver2
-
-DestroyMenu "Screensaver2"
-AddToMenu "Screensaver2"
-+ "Eyes%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode eyes &
-+ "Fadeplot%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode fadeplot &
-+ "Flag%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode flag &
-+ "Flame%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode flame &
-+ "Forest%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode forest &
-+ "Galaxy%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode galaxy &
-+ "Geometry%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode geometry &
-+ "Grav%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode grav &
-+ "Helix%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode helix &
-+ "Hop%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode hop   &
-+ "Hyper%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode hyper &
-+ "Ico%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode ico &
-+ "Ifs%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode ifs &
-+ "Julia%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode julia &
-+ "Kaleid%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode kaleid &
-+ "Laser%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode laser &
-+ "Life%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode life   &
-+ "Life1d%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode life1d &
-+ "Life3d%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode life3d &
-+ "Lightning%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode lightning &
-+ "Lisa%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode lisa &
-+ "Lissie%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode lissie &
-+ "Loop%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode loop &
-+ "More"                        PopUp ScreenSaver3
-
-DestroyMenu "Screensaver3"
-AddToMenu "Screensaver3"
-+ "Mandelbrot%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode mandelbrot &
-+ "Marquee%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode marquee &
-+ "Maze%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode maze &
-+ "Mountain%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode mountain &
-+ "Munch%mini-bball.xpm%"	Exec xlock -nolock -nice 0 -mode munch &
-+ "Nose%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode nose &
-+ "Pacman%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode pacman &
-+ "Penguin%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode image -bitmap /usr/include/X11/bitmaps/l-linux.xbm -batchcount 7 &
-+ "Penrose%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode penrose &
-+ "Petal%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode petal &
-+ "Puzzle%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode puzzle &
-+ "Pyro%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode pyro &
-+ "Qix%mini-bball.xpm%"   	Exec xlock -nolock -nice 0 -mode qix &
-+ "Roll%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode roll &
-+ "Rotor%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode rotor &
-+ "Shape%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode shape &
-+ "Sierpinski%mini-bball.xpm%"  Exec xlock -nolock -nice 0 -mode sierpinski &
-+ "Slip%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode slip &
-+ "Sphere%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode sphere &
-+ "Spiral%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode spiral &
-+ "Spline%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode spline &
-+ "Star%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode star &
-+ "Strange%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode strange &
-+ "More"                        PopUp ScreenSaver4
-
-DestroyMenu "Screensaver4"
-AddToMenu "Screensaver4"
-+ "Swarm%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode swarm &
-+ "Swirl%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode swirl &
-+ "Triangle%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode triangle &
-+ "Tube%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode tube &
-+ "Turtle%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode turtle &
-+ "Vines%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode vines &
-+ "Voters%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode voters &
-+ "Wator%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode wator &
-+ "Wire%mini-bball.xpm%"  	Exec xlock -nolock -nice 0 -mode wire &
-+ "World%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode world &
-+ "Worm%mini-bball.xpm%" 	Exec xlock -nolock -nice 0 -mode worm &
-
-DestroyMenu "Screenlock"
-AddToMenu "Screenlock"
-+ "Blank%mini-bball.xpm%" 	Exec xlock -nice 0 -mode blank &
-+ "Random%mini-bball.xpm%"	Exec xlock -nice 0 -mode random &
-+ ""				Nop
-+ "Ant%mini-bball.xpm%"  	Exec xlock -nice 0 -mode ant &
-+ "Ball%mini-bball.xpm%"  	Exec xlock -nice 0 -mode ball &
-+ "Bat%mini-bball.xpm%"  	Exec xlock -nice 0 -mode bat &
-+ "Blot%mini-bball.xpm%"	Exec xlock -nice 0 -mode blot &
-+ "Bomb%mini-bball.xpm%"	Exec xlock -nice 0 -mode bomb &
-+ "Bouboule%mini-bball.xpm%"	Exec xlock -nice 0 -mode bouboule &
-#+ "Bob%mini-bball.xpm%"   	Exec xlock -nice 0 -mode image -bitmap /usr/include/X11/bitmaps/l-bob.xbm -batchcount 7 &
-#+ "Bounce%mini-bball.xpm%" 	Exec xlock -nice 0 -mode bounce &
-+ "\"Bob\"%mini-bball.xpm%" 	Exec xlock -nice 0 -mode bounce &
-+ "Braid%mini-bball.xpm%" 	Exec xlock -nice 0 -mode braid &
-+ "Bug%mini-bball.xpm%"   	Exec xlock -nice 0 -mode bug &
-+ "Bubble%mini-bball.xpm%"   	Exec xlock -nice 0 -mode bubble &
-+ "Clock%mini-bball.xpm%" 	Exec xlock -nice 0 -mode clock &
-+ "Coral%mini-bball.xpm%" 	Exec xlock -nice 0 -mode coral &
-+ "Crystal%mini-bball.xpm%" 	Exec xlock -nice 0 -mode crystal &
-+ "Daisy%mini-bball.xpm%" 	Exec xlock -nice 0 -mode daisy &
-+ "Dclock%mini-bball.xpm%" 	Exec xlock -nice 0 -mode dclock &
-+ "Deco%mini-bball.xpm%" 	Exec xlock -nice 0 -mode deco &
-+ "Demon%mini-bball.xpm%" 	Exec xlock -nice 0 -mode demon &
-+ "Dilemma%mini-bball.xpm%" 	Exec xlock -nice 0 -mode dilemma &
-+ "Drift%mini-bball.xpm%" 	Exec xlock -nice 0 -mode drift &
-+ "More"                        PopUp Screenlock2
-
-DestroyMenu "Screenlock2"
-AddToMenu "Screenlock2"
-+ "Eyes%mini-bball.xpm%" 	Exec xlock -nice 0 -mode eyes &
-+ "Fadeplot%mini-bball.xpm%" 	Exec xlock -nice 0 -mode fadeplot &
-+ "Flag%mini-bball.xpm%" 	Exec xlock -nice 0 -mode flag &
-+ "Flame%mini-bball.xpm%" 	Exec xlock -nice 0 -mode flame &
-+ "Forest%mini-bball.xpm%" 	Exec xlock -nice 0 -mode forest &
-+ "Galaxy%mini-bball.xpm%" 	Exec xlock -nice 0 -mode galaxy &
-+ "Geometry%mini-bball.xpm%" 	Exec xlock -nice 0 -mode geometry &
-+ "Grav%mini-bball.xpm%" 	Exec xlock -nice 0 -mode grav &
-+ "Helix%mini-bball.xpm%" 	Exec xlock -nice 0 -mode helix &
-+ "Hop%mini-bball.xpm%"   	Exec xlock -nice 0 -mode hop   &
-+ "Hyper%mini-bball.xpm%" 	Exec xlock -nice 0 -mode hyper &
-+ "Ico%mini-bball.xpm%" 	Exec xlock -nice 0 -mode ico &
-+ "Ifs%mini-bball.xpm%" 	Exec xlock -nice 0 -mode ifs &
-+ "Julia%mini-bball.xpm%" 	Exec xlock -nice 0 -mode julia &
-+ "Kaleid%mini-bball.xpm%" 	Exec xlock -nice 0 -mode kaleid &
-+ "Laser%mini-bball.xpm%" 	Exec xlock -nice 0 -mode laser &
-+ "Life%mini-bball.xpm%"  	Exec xlock -nice 0 -mode life   &
-+ "Life1d%mini-bball.xpm%"  	Exec xlock -nice 0 -mode life1d &
-+ "Life3d%mini-bball.xpm%"  	Exec xlock -nice 0 -mode life3d &
-+ "Lightning%mini-bball.xpm%"  	Exec xlock -nice 0 -mode lightning &
-+ "Lisa%mini-bball.xpm%"  	Exec xlock -nice 0 -mode lisa &
-+ "Lissie%mini-bball.xpm%"  	Exec xlock -nice 0 -mode lissie &
-+ "Loop%mini-bball.xpm%"  	Exec xlock -nice 0 -mode loop &
-+ "More"                        PopUp Screenlock3
-
-DestroyMenu "Screenlock3"
-AddToMenu "Screenlock3"
-+ "Mandelbrot%mini-bball.xpm%" 	Exec xlock -nice 0 -mode mandelbrot &
-+ "Marquee%mini-bball.xpm%"  	Exec xlock -nice 0 -mode marquee &
-+ "Maze%mini-bball.xpm%" 	Exec xlock -nice 0 -mode maze &
-+ "Mountain%mini-bball.xpm%"	Exec xlock -nice 0 -mode mountain &
-+ "Munch%mini-bball.xpm%"	Exec xlock -nice 0 -mode munch &
-+ "Nose%mini-bball.xpm%"  	Exec xlock -nice 0 -mode nose &
-+ "Pacman%mini-bball.xpm%"  	Exec xlock -nice 0 -mode pacman &
-+ "Penguin%mini-bball.xpm%"   	Exec xlock -nice 0 -mode image -bitmap /usr/include/X11/bitmaps/l-linux.xbm -batchcount 7 &
-+ "Penrose%mini-bball.xpm%"  	Exec xlock -nice 0 -mode penrose &
-+ "Petal%mini-bball.xpm%"  	Exec xlock -nice 0 -mode petal &
-+ "Puzzle%mini-bball.xpm%"  	Exec xlock -nice 0 -mode puzzle &
-+ "Pyro%mini-bball.xpm%"  	Exec xlock -nice 0 -mode pyro &
-+ "Qix%mini-bball.xpm%"   	Exec xlock -nice 0 -mode qix &
-+ "Roll%mini-bball.xpm%" 	Exec xlock -nice 0 -mode roll &
-+ "Rotor%mini-bball.xpm%" 	Exec xlock -nice 0 -mode rotor &
-+ "Shape%mini-bball.xpm%" 	Exec xlock -nice 0 -mode shape &
-+ "Sierpinski%mini-bball.xpm%"  Exec xlock -nice 0 -mode sierpinski &
-+ "Slip%mini-bball.xpm%"  	Exec xlock -nice 0 -mode slip &
-+ "Sphere%mini-bball.xpm%" 	Exec xlock -nice 0 -mode sphere &
-+ "Spiral%mini-bball.xpm%" 	Exec xlock -nice 0 -mode spiral &
-+ "Spline%mini-bball.xpm%" 	Exec xlock -nice 0 -mode spline &
-+ "Star%mini-bball.xpm%" 	Exec xlock -nice 0 -mode star &
-+ "Strange%mini-bball.xpm%" 	Exec xlock -nice 0 -mode strange &
-+ "More"                        PopUp Screenlock4
-
-DestroyMenu "Screenlock4"
-AddToMenu "Screenlock4"
-+ "Swarm%mini-bball.xpm%" 	Exec xlock -nice 0 -mode swarm &
-+ "Swirl%mini-bball.xpm%" 	Exec xlock -nice 0 -mode swirl &
-+ "Triangle%mini-bball.xpm%" 	Exec xlock -nice 0 -mode triangle &
-+ "Tube%mini-bball.xpm%" 	Exec xlock -nice 0 -mode tube &
-+ "Turtle%mini-bball.xpm%" 	Exec xlock -nice 0 -mode turtle &
-+ "Vines%mini-bball.xpm%" 	Exec xlock -nice 0 -mode vines &
-+ "Voters%mini-bball.xpm%" 	Exec xlock -nice 0 -mode voters &
-+ "Wator%mini-bball.xpm%"  	Exec xlock -nice 0 -mode wator &
-+ "Wire%mini-bball.xpm%"  	Exec xlock -nice 0 -mode wire &
-+ "World%mini-bball.xpm%" 	Exec xlock -nice 0 -mode world &
-+ "Worm%mini-bball.xpm%" 	Exec xlock -nice 0 -mode worm &
-
-DestroyMenu "Games"
-AddToMenu "Games"
-+ "Maze%mini-maze.xpm%"         Exec maze &
-+ "Spider%mini-espada.xpm%"     Exec spider &
-+ "Chess%mini-slon.xpm%"        Exec xboard &
-+ "Xlander%mini-xlander.xpm%"   Exec xlander &
-#+ "Xmahjongg%mini-xmahjongg.xpm%" Exec xmahjongg &
-+ "Workman%mini-cdlabel.xpm%"	Exec workman &
-+ "" Nop
-+ "Amusements"                  Popup Amusements
-
-DestroyMenu "Amusements"
-AddToMenu "Amusements"
-#+ "Xcat%mini-cat.xpm%"   	Exec xcat &
-+ "Xeyes%mini-eyes.xpm%"        Exec xeyes &
-+ "Xlogo%mini-bx2.xpm%"         Exec xlogo &
-+ "Xroach%mini-roach.xpm%"      Exec xroach &
-+ "Xsnow%mini-xsnow.xpm%"       Exec xsnow &
-+ "Stop Xsnow%mini-stop.xpm%"	Exec killall xsnow &
-
-DestroyMenu "Accessories"
-AddToMenu "Accessories"
-+ "Font viewer (xfontsel)%mini-font.xpm%"  Exec xfontsel &
-+ "Manual pages%mini-book1.xpm%"        Exec xman &
-+ "Magnifying glass%mini-zoom.xpm%"     Exec xmag &
-+ "Oclock%mini-clock.xpm%"              Exec oclock &
-+ "Running Processes (Top)%mini-run.xpm%"	Exec xterm -font 7x14 -T Top -n Top -e top &
-+ "System load%mini-perf.xpm%"          Exec xload &
-+ "Xclipboard%mini-clipboard.xpm%" Exec xclipboard &
-+ "Xclock%mini-clock.xpm%"              Exec xclock &
-
-DestroyMenu "Applications"
-AddToMenu "Applications"
-+ "Emacs%mini-edit.xpm%"        Exec emacs &
-+ "NcFTP%mini-ftp.xpm%"         Exec xterm -name NcFtp -T FTP -ls -fn 7x14 -e ncftp &
-+ "GIMP%mini-camera.xpm%"       Exec gimp &
-+ "Gv%mini-gv.xpm%"		Exec gv &
-+ "Gnuplot%mini-zoom.xpm%"      Exec xterm -T "Gnuplot" -name Gnuplot -fn 7x14 -e gnuplot &
-+ "SeaMonkey%mini-nscape.xpm%"	Exec seamonkey &
-+ "Pine%mini-mail.xpm%"  	Exec xterm -name Mail -T Mail -ls -fn 7x14 -e pine -i &
-+ "Xv%mini-xv.xpm%"		Exec xv &
-+ "Xedit%mini-edit.xpm%" 	Exec xedit &
-+ "Xfig%mini-xfig.xpm%"         Exec xfig &
-+ "Xfractint%mini-fractal.xpm%"	Exec xterm -font 7x14 -e xfractint &
-+ "Xpaint%mini-paint.xpm%"	Exec xpaint &
-+ "Xpdf%mini-pdf.xpm%"          Exec xpdf &
-+ "Xxgdb%mini-bug2.xpm%"	Exec xxgdb &
-
-DestroyMenu "Filemanagers"
-AddToMenu "Filemanagers"
-#+ "TkDesk%mini-desktop.xpm%"	Exec tkdesk &
-+ "Xfm%mini-filemgr.xpm%"	Exec xfm &
-
-#
-# This menu is invoked as a sub-menu - it allows you to quit,
-# restart, or switch to another WM.
-#
-DestroyMenu "Quit-Verify"
-AddToMenu "Quit-Verify"
-+ "Quit fvwm2%mini-exclam.xpm%"        Quit
-+ "" 					Nop
-+ "Restart Fvwm2%mini-turn.xpm%"	Restart fvwm2
-+ "" 					Nop
-+ "Start fvwm95%mini-exp.xpm%"		Restart fvwm95
-+ "Start mwm%mini-mwm.xpm%"		Restart mwm
-+ "Start olvwm%mini-olwm.xpm%"		Restart /usr/openwin/bin/olvwm
-+ "Start olwm%mini-olwm.xpm%"		Restart /usr/openwin/bin/olwm
-+ "Start twm%mini-twm.xpm%"		Restart twm
-
-#
-# Provides a list of modules to fire off
-#
-#DestroyMenu "Module-Popup"
-#AddToMenu "Module-Popup"
-##+ "Audio"                               Module FvwmAudio
-#+ "Banner%mini.fvwm.xpm%"               Module FvwmBanner
-#+ "Button Bar%mini-ball.xpm%"		Module FvwmButtons
-#+ "Button Bar (Mini)%mini-ball.xpm%"	Module FvwmButtons MiniButtons
-##+ "Clean-Up%mini-pencil.xpm%"           Module FvwmClean
-##+ "Configure%mini-hammer.xpm%"          Module FvwmConfig
-#+ "Debug%mini-bug2.xpm%"		Module FvwmDebug
-##+ "Task bar%mini-exp.xpm%"		Module FvwmTaskBar
-#+ "Identify%mini-question.xpm%"		Module FvwmIdent
-#+ "Save Desktop%mini-desktop.xpm%"	Module FvwmSaveDesk
-#+ "Pager%mini-pager.xpm%"		Module FvwmPager 0 0
-#+ "Window List%mini-windows.xpm%"	Module FvwmWinList
-#+ "Talk%mini-exclam.xpm%"		Module FvwmTalk
-
-AddToMenu Module-Popup  "FvwmModules"   Title
-+                       "Identify"      Module  FvwmIdent
-+                       "Talk"          Module  FvwmTalk
-+                       ""              Nop
-+                       "Button-Bar"    Module  FvwmButtons
-+                       "Pager"         Module  FvwmPager 0 0
-+                       "Pager (2 desks)" Module  FvwmPager 0 1
-+                       "WinList"       Module  FvwmWinList
-+                       ""              Nop
-+                       "Banner"        Module  FvwmBanner
-+                       "ScrollBar"     Module  FvwmScroll 50 50
-+                       "Background"    Module  FvwmBacker
-+                       "AutoRaise"     Module  FvwmAuto 200 Raise Nop
-+                       "Stop AutoRaise" KillModule FvwmAuto
-+                       ""              Nop
-+                       "IconBox"       Module  FvwmIconBox
-+                       "IconMan"       Module  FvwmIconMan
-+                       ""              Nop
-+                       "Form - Rlogin"      Module FvwmForm Rlogin
-+                       "Form - MyFvwmTalk"  Module FvwmForm MyFvwmTalk
-+                       "Form - QuitVerify"  Module FvwmForm QuitVerify
-
-#
-# This menu will fire up some very common utilities
-#
-DestroyMenu "Utilities"
-AddToMenu "Utilities"
-+ ""					Nop
-+ "Xterm%mini-term.xpm%" 		Exec xterm -sb -sl 500 -j -ls -fn 7x14 -fb 7x14bold &
-+ "Running Processes (Top)%mini-run.xpm%"	Exec xterm -font 7x14 -T Top -n Top -e top &
-+ "Calculator%mini-calc.xpm%"		Exec xcalc &
-+ "Manual pages%mini-book1.xpm%" 	Exec xman &
-+ "Magnifying glass%mini-zoom.xpm%" 	Exec xmag &
-+ "Oclock%mini-clock.xpm%" 		Exec oclock &
-+ ""					Nop
-+ "Applications%mini-x2.xpm%"		Popup Applications
-+ "File Managers%mini-filemgr.xpm%"     Popup Filemanagers
-+ "Games%mini-happy.xpm%"		Popup Games
-+ "Shells%mini-term.xpm"		Popup Shells
-+ ""					Nop
-+ "Screensaver%mini-display.xpm%"	Popup Screensaver
-+ "Lock Screen%mini-lock.xpm%"		Popup Screenlock
-+ ""					Nop
-+ "Modules%mini-modules.xpm%"		Popup Module-Popup
-+ ""					Nop
-+ "Refresh Screen%mini-ray.xpm%"	Refresh
-+ ""					Nop
-+ "Exit Fvwm2%mini-stop.xpm%"		Popup Quit-Verify
-
-#
-# This defines the most common window operations
-#
-DestroyMenu "Window Ops"
-AddToMenu "Window Ops" Title
-+ "&Move%mini-move.xpm%"        Function Move-or-Raise
-+ "&Resize%mini-resize.xpm%"    Function Resize-or-Raise
-+ "R&aise%mini-raise.xpm%"      Raise
-+ "&Lower%mini-lower.xpm%"      Lower
-+ "(De)Iconify"                 Iconify
-+ "(Un)Stick"                   Stick
-+ "(Un)Maximize%mini-max1.xpm%" Function maximize_func
-+ ""                            Nop
-+ "Kill%mini-bomb.xpm%"         Destroy
-+ "&Close%mini-cross.xpm%"      Delete
-+ ""                            Nop
-+ "Switch to..."                WindowList
-+ "Refresh Screen%mini-ray.xpm%" Refresh
-
-#
-# A trimmed down version of "Window Ops", good for binding to decorations
-#
-AddToMenu "Window-Ops2" "&Restore"        Iconify -1
-+                       "&Move"           Move-or-Raise
-+                       "&Size"           Resize-or-Raise
-+                       "Mi&nimize"       Iconify 1
-+                       "Ma&ximize"       Maximize 100 100
-+                       ""                Nop
-+                       "&Kill"           Destroy
-+                       "&Close	Alt+F4"   Delete
-
-#========================================================================#
-
-#
-# One more complex function - couldn't be defined earlier because it used 
-# pop-up menus
-#
-# This creates the "system" menu for the title-bar window-ops
-# pop-up
-#
-AddToFunc "window_ops_func" "C" PopUp Window-Ops2
-+              "M" PopUp Window-Ops2
-+              "D" Delete  
-
-
-#========================================================================#
-
-#
-# Mouse bindings
-#
-
-# First, for the mouse in the root window
-# Button 1 gives the Utilities menu
-# Button 2 gives the Window Ops menu
-# Button 3 gives the WindowList (like TwmWindows)
-# I use the AnyModifier (A) option for the modifier field, so you can hold down
-# any shift-control-whatever combination you want!
-
-#     Button	Context Modifi 	Function
-Mouse 1		R   	A       Menu "Utilities" Nop
-Mouse 2		R    	A       Menu "Window Ops" Nop
-Mouse 3         R       A       WindowList
-#Mouse 3	R    	A      	Module "winlist" FvwmWinList transient
-
-# Now the title bar buttons
-# Any button in the left title-bar button gives the window ops menu
-# Any button in the first right title-bar button Iconifies the window
-# Any button in the second title-bar button full-maximizes
-# Note the use of "Mouse 0" for AnyButton.
-
-#     Button	Context Modif 	Function
-Mouse 0 	1       A       Function "window_ops_func"
-Mouse 0 	2       A       Maximize 100 100
-Mouse 0 	4       A       Iconify
-
-# Now the rest of the frame
-# Here I invoke my complex functions for Move-or-lower, Move-or-raise,
-# and Resize-or-Raise. 
-#
-# Button 1 in the corner pieces, with any modifiers, gives resize or raise
-Mouse 1		F	A	Function "Resize-or-Raise"
-# Button 1 in the title, sides, or icon, w/ any modifiers, gives move or raise
-Mouse 1		TS	A	Function "Move-or-Raise"
-
-# Button 1 in an icons gives move for a drag, de-iconify for a double-click,
-# nothing for a single click
-# Button 2 in an icon, w/ any modifiers, gives de-iconify
-Mouse 1		I	A	Function "Move-or-Iconify"
-Mouse 2		I	A	Iconify
-
-# Button 2 in the corners, sides, or title-bar gives the window ops menu
-Mouse 2		FST	A	Function "window_ops_func"
-
-# Button 3 anywhere in the decoration (except the title-bar buttons)
-# does a raise-lower
-Mouse 3		TSIF	A	RaiseLower
-
-# Button 3 in the window, with the Modifier-1 key (usually alt or diamond)
-# gives Raise-Lower. Used to use control here, but that interferes with xterm
-Mouse 3         W       M       RaiseLower
-
-#========================================================================#
-
-# Now some keyboard shortcuts.
-
-# Arrow Keys
-# press arrow + control anywhere, and scroll by 1 page
-Key Left	A	C	Scroll -100 0
-Key Right	A	C	Scroll +100 +0
-Key Up		A	C	Scroll +0   -100
-Key Down	A	C	Scroll +0   +100
-
-# press arrow + meta key, and scroll by 1/10 of a page
-Key Left	A	M	Scroll -10 +0
-Key Right	A	M	Scroll +10 +0
-Key Up		A	M	Scroll +0   -10
-Key Down	A	M	Scroll +0   +10
-
-# press shift arrow + control anywhere, and move the pointer by 1% of a page
-Key Left	A	SC	CursorMove -1 0
-Key Right	A	SC	CursorMove +1 +0
-Key Up		A	SC	CursorMove +0   -1
-Key Down	A	SC	CursorMove +0   +1
-
-# press shift arrow + meta key, and move the pointer by 1/10 of a page
-Key Left	A	SM	CursorMove -10 +0
-Key Right	A	SM	CursorMove +10 +0
-Key Up		A	SM	CursorMove +0   -10
-Key Down	A	SM	CursorMove +0   +10
-
-# Keyboard accelerators
-Key F1		A	M	Popup "Utilities"
-Key F1		A	M	Popup "Utilities"
-Key F2		A	M	Popup "Window Ops"
-Key F3		A	M	Module "WindowList" FvwmWinList 
-Key F4		A	M	Iconify
-Key F5		A	M	Move
-Key F6		A	M	Resize
-Key F7		A	M	CirculateUp
-Key F8		A	M	CirculateDown
-
-#Page Up/Dapge Down keys are used to scroll by one desktop page
-# in any context, press page up/down + control
-# in root context, just pressing page up/down is OK
-# 
-# I prefer the non-wrapping scroll. These are for example purposes only
-#Key Next	A       C       Scroll 100000 0
-#Key Next	R       N       Scroll 100000 0  
-#Key Prior	A       C       Scroll -100000 0
-#Key Prior	R       N       Scroll -100000 0
-
-Key Tab         A       M       Prev Focus
-Key Tab         A       MS      Next Focus
-
-Key Escape      A       C       WindowList
-
-#========================================================================#
-
-# Definitions used by the modules
-
-#------------------ Pager
-*FvwmPagerBack grey60
-*FvwmPagerFore black
-*FvwmPagerFont -adobe-helvetica-bold-r-*-*-10-*-*-*-*-*-*-*
-*FvwmPagerHilight #c3c3c3
-*FvwmPagerGeometry -3-27
-*FvwmPagerLabel 0 Desktop
-*FvwmPagerSmallFont 5x8
-
-#------------------ FvwmButtons
-*FvwmButtonsFore Black
-*FvwmButtonsBack #c3c3c3
-*FvwmButtonsFont -adobe-helvetica-bold-r-*-*-10-*-*-*-*-*-*-*
-# Geometry - really likes to pick its own size, but giving a position is OK
-*FvwmButtonsGeometry -5-5
-# Layout: specify rows or columns, not both
-*FvwmButtonsRows 1
-
-# Define the buttons to use.....
-*FvwmButtons xclock  clock.xpm   Swallow "xclock" Exec xclock -bg \#c3c3c3 -geometry -1500-1500 -padding 0 &
-#*GoodStuff xcmap   NULL        Swallow "xcmap" xcmap -geometry -1500-1500
-*FvwmButtons (2x1) load NULL     Swallow "xload" Exec nice -16 xload -nolabel -bg grey60 -update 5 -geometry -1500-1500
-*FvwmButtons SeaMonkey nscape.xpm Exec "SeaMonkey" seamonkey &
-*FvwmButtons xterm   rterm.xpm   Exec    "xterm" xterm -ls -sb -fn 7x14 &
-*FvwmButtons xfm     Xfm.xpm     Exec    "Xfm" xfm &
-#*FvwmButtons textedit textedit.xpm Exec  "Textedit" textedit &
-*FvwmButtons xcalc   rcalc.xpm   Exec    "Calculator" xcalc &
-*FvwmButtons xv   xv.xpm   Exec    "xv" xv &
-#*FvwmButtons gv   gv.xpm      Exec    "gv" gv &
-#*FvwmButtons seamonkey nscape.xpm Exec    "SeaMonkey" seamonkey -geometry 920x650+90+5
-*FvwmButtons kill    rbomb.xpm   Destroy
-#*FvwmButtons (2x1) - whatever    SwallowModule Exec "Desktop" FvwmPager 0 0
-*FvwmButtons (2x1, Swallow(UseOld) "Desktop" 'FvwmPager 0 0')
-
-#------------------ MiniButtons
-
-Style "MiniButtons"  NoTitle,NoHandles,Sticky,StaysOnTop,WindowListSkip,BorderWidth 0
-
-*MiniButtonsFore Black
-*MiniButtonsBack #c0c0c0
-*MiniButtonsFont -adobe-helvetica-bold-r-*-*-10-*-*-*-*-*-*-*
-*MiniButtonsGeometry -5-5
-*MiniButtonsRows 1
-*MiniButtonsPadding 1 1
-
-*MiniButtons -   mini-nscape.xpm      Exec    "SeaMonkey" seamonkey -geometry 790x543+0+0 &
-*MiniButtons -   mini-term.xpm        Exec    "XTerm" xterm -ls -sb -fn 7x14 &
-*MiniButtons -   mini-filemgr.xpm     Exec    "Xfm" xfm &
-*MiniButtons -   mini-calc.xpm        Exec    "Calculator" xcalc &
-#*MiniButtons -   mini-gv.xpm          Exec    "gv" gv &
-*MiniButtons -   mini-xv.xpm          Exec    "xv" xv &
-*MiniButtons -   mini-bomb.xpm        Destroy
-
-#------------------ Identify
-*FvwmIdentBack #000080
-*FvwmIdentFore Yellow
-*FvwmIdentFont -adobe-helvetica-medium-r-*-*-12-*-*-*-*-*-*-*
-
-#------------------ FvwmWinList
-*FvwmWinListBack #c3c3c3
-*FvwmWinListFore Black
-*FvwmWinListFont -adobe-helvetica-bold-r-*-*-10-*-*-*-*-*-*-*
-*FvwmWinListAction Click1 Iconify -1,Focus
-*FvwmWinListAction Click2 Iconify
-*FvwmWinListAction Click3 Module "FvwmIdent" FvwmIdent
-*FvwmWinListUseSkipList
-*FvwmWinListGeometry +0-1
-        
-#------------------ FvwmTaskBar
-#Style "FvwmTaskBar" NoTitle,BorderWidth 4,HandleWidth 4,Sticky,StaysOnTop,WindowListSkip,CirculateSkip
-# I don't like the taskbar to stay to top, since it covers the bottom
-# part of SeaMonkey in full-screen mode:
-#Style "FvwmTaskBar" NoTitle,BorderWidth 4,HandleWidth 4,Sticky,WindowListSkip,CirculateSkip
-
-*FvwmTaskBarGeometry +0-0
-*FvwmTaskBarFore Black
-*FvwmTaskBarBack #c3c3c3
-*FvwmTaskBarTipsFore black
-*FvwmTaskBarTipsBack bisque
-*FvwmTaskBarFont -adobe-helvetica-medium-r-*-*-*-120-*-*-*-*-*-*
-*FvwmTaskBarSelFont -adobe-helvetica-bold-r-*-*-*-120-*-*-*-*-*-*
-*FvwmTaskBarAction Click1 Iconify -1,Raise,Focus
-*FvwmTaskBarAction Click2 Iconify
-*FvwmTaskBarAction Click3 Module "FvwmIdent" FvwmIdent
-*FvwmTaskBarUseSkipList
-*FvwmTaskBarAutoStick
-*FvwmTaskBarStartName Start
-*FvwmTaskBarStartMenu StartMenu
-# Just for fun, let's use the Linux penguin for the Start button:
-*FvwmTaskBarStartIcon mini-penguin.xpm
-#*FvwmTaskBarStartIcon mini-exp.xpm
-*FvwmTaskBarShowTips
-*FvwmTaskBarMailProg xterm -e mail
diff --git a/source/xap/fvwm/xinitrc.fvwm2 b/source/xap/fvwm/xinitrc.fvwm2
index 788a4e43..c0fb46b0 100644
--- a/source/xap/fvwm/xinitrc.fvwm2
+++ b/source/xap/fvwm/xinitrc.fvwm2
@@ -28,8 +28,8 @@ fi
 
 xsetroot -solid SteelBlue
 if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
-  ck-launch-session fvwm2
+  ck-launch-session /usr/bin/startfvwm2
 else
-  fvwm2
+  dbus-launch --exit-with-session /usr/bin/startfvwm2
 fi
 
diff --git a/source/xap/geeqie/geeqie.SlackBuild b/source/xap/geeqie/geeqie.SlackBuild
index dbde32bb..2c0851b4 100755
--- a/source/xap/geeqie/geeqie.SlackBuild
+++ b/source/xap/geeqie/geeqie.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2010, 2011  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2010, 2011, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,8 +24,8 @@
 
 
 PKGNAM=geeqie
-VERSION=1.0
-BUILD=${BUILD:-3}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/geeqie/slack-desc b/source/xap/geeqie/slack-desc
index cadbd774..7371d160 100644
--- a/source/xap/geeqie/slack-desc
+++ b/source/xap/geeqie/slack-desc
@@ -17,4 +17,3 @@ geeqie:
 geeqie:
 geeqie:
 geeqie:
-geeqie:
diff --git a/source/xap/gftp/gftp.SlackBuild b/source/xap/gftp/gftp.SlackBuild
index ba93205e..9a293b64 100755
--- a/source/xap/gftp/gftp.SlackBuild
+++ b/source/xap/gftp/gftp.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,9 +20,20 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=2.0.19
-ARCH=${ARCH:-x86_64}
-BUILD=${BUILD:-2}
+PKGNAM=gftp
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
diff --git a/source/xap/gimp/gimp.SlackBuild b/source/xap/gimp/gimp.SlackBuild
index 330ca4f1..45848585 100755
--- a/source/xap/gimp/gimp.SlackBuild
+++ b/source/xap/gimp/gimp.SlackBuild
@@ -23,7 +23,7 @@
 
 PKGNAM=gimp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -79,8 +79,6 @@ CFLAGS="$SLKCFLAGS" \
   --infodir=/usr/info \
   --docdir=/usr/doc/gimp-$VERSION \
   --disable-static \
-  --enable-gimp-remote \
-  --without-gvfs \
   --with-libcurl \
   --build=$ARCH-slackware-linux
 
@@ -91,10 +89,20 @@ make install DESTDIR=$PKG || exit 1
 # Add a manpage symlink for POLA-compliance
 ( cd $PKG/usr/man/man1 ; ln -sf gimptool-2.?.1 gimptool.1 )
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/usr/doc/gimp-$VERSION
 cp -a \
diff --git a/source/xap/gkrellm/gkrellm.SlackBuild b/source/xap/gkrellm/gkrellm.SlackBuild
index e156f181..14c07172 100755
--- a/source/xap/gkrellm/gkrellm.SlackBuild
+++ b/source/xap/gkrellm/gkrellm.SlackBuild
@@ -22,7 +22,7 @@
 
 VERSION=2.3.5
 PKGVER=2.3.5
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/gnuplot/gnuplot.SlackBuild b/source/xap/gnuplot/gnuplot.SlackBuild
index 47cf5eb7..b6203229 100755
--- a/source/xap/gnuplot/gnuplot.SlackBuild
+++ b/source/xap/gnuplot/gnuplot.SlackBuild
@@ -82,6 +82,11 @@ CFLAGS="$SLKCFLAGS" \
   --with-readline=builtin \
   --build=${ARCH}-slackware-linux
 
+#
+# I think most people would rather not have a Qt dependency here.
+# --enable-qt
+# 
+
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
diff --git a/source/xap/gucharmap/doinst.sh b/source/xap/gucharmap/doinst.sh
index 4e8ba707..f6a66768 100644
--- a/source/xap/gucharmap/doinst.sh
+++ b/source/xap/gucharmap/doinst.sh
@@ -2,3 +2,9 @@ if [ -x /usr/bin/update-desktop-database ]; then
   /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
 fi
 
+if [ -e usr/share/glib-2.0/schemas ]; then
+  if [ -x /usr/bin/glib-compile-schemas ]; then
+    /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/xap/gucharmap/gucharmap.SlackBuild b/source/xap/gucharmap/gucharmap.SlackBuild
index 13b249a9..4ceef233 100755
--- a/source/xap/gucharmap/gucharmap.SlackBuild
+++ b/source/xap/gucharmap/gucharmap.SlackBuild
@@ -76,8 +76,6 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var/lib \
   --docdir=/usr/doc/gucharmap-$VERSION \
   --enable-static=no \
-  --disable-gconf \
-  --disable-schemas-install \
   --disable-scrollkeeper \
   --build=$ARCH-slackware-linux
 
diff --git a/source/xap/gv/gv.SlackBuild b/source/xap/gv/gv.SlackBuild
index 1f300165..67353af1 100755
--- a/source/xap/gv/gv.SlackBuild
+++ b/source/xap/gv/gv.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -58,7 +58,7 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
-zcat $CWD/gv.keysym.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/gv.libXaw3d.diff.gz | patch -p1 --verbose || exit 1
 
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
@@ -69,7 +69,7 @@ find . \
   -exec chmod 644 {} \;
 
 # Configure:
-CFLAGS="$SLKCFLAGS" \
+CFLAGS="$SLKCFLAGS $(pkg-config --cflags xaw3d)" \
 ./configure \
   --prefix=/usr \
   --sysconfdir=/etc \
diff --git a/source/xap/gv/gv.keysym.diff b/source/xap/gv/gv.keysym.diff
deleted file mode 100644
index f2e0a7ca..00000000
--- a/source/xap/gv/gv.keysym.diff
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -ur a/src/gv_misc_res.dat b/src/gv_misc_res.dat
---- a/src/gv_misc_res.dat	2010-10-15 09:21:36.000000000 +0200
-+++ b/src/gv_misc_res.dat	2010-10-15 09:21:48.000000000 +0200
-@@ -476,7 +476,6 @@
-  <Key>BackSpace:	GV_Page(up,left-bottom,!page-1,bottom-rightedge)\n\
-  <Key>Insert:		GV_Page(page-5)		\n\
-  <Key>Delete:		GV_Page(page+5)		\n\
-- <Key>apLineDel:	GV_Page(page+5)		\n\
-  <Key>Home:		GV_Page(page=0)		\n\
-  <Key>End:		GV_Page(page=99999)	\n\
-  <Key>Prior:		GV_Page(page-1)		\n\
-
diff --git a/source/xap/gv/gv.libXaw3d.diff b/source/xap/gv/gv.libXaw3d.diff
new file mode 100644
index 00000000..b64cef00
--- /dev/null
+++ b/source/xap/gv/gv.libXaw3d.diff
@@ -0,0 +1,11 @@
+--- ./src/Scrollbar.c.orig	2011-08-03 11:14:14.000000000 -0500
++++ ./src/Scrollbar.c	2012-05-13 11:19:18.140324835 -0500
+@@ -1006,7 +1006,7 @@
+    TOPLOC = newtop;
+    SHOWNLENGTH = newbot-newtop+1;
+ 
+-   (*swclass->threeD_class.shadowdraw) (w, event, region, FALSE);
++   (*swclass->threeD_class.shadowdraw) (w, event, region, sbw->threeD.relief, FALSE);
+ 
+    ENDMESSAGE(Redisplay)
+ }
diff --git a/source/xap/imagemagick/imagemagick.SlackBuild b/source/xap/imagemagick/imagemagick.SlackBuild
index 565d3a0a..cf17f5f3 100755
--- a/source/xap/imagemagick/imagemagick.SlackBuild
+++ b/source/xap/imagemagick/imagemagick.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -29,14 +29,14 @@ BUILD=${BUILD:-1}
 # This is a bit messy, so we'll explain it well.  :-)
 
 # This is the base version number, which is needed to cd into the source tree
-BASEVER=6.6.6-10
+BASEVER=6.7.7-10
 
 # This is the version number used in the source tarball filename
-FILEVER=6.6.6-10
+FILEVER=6.7.7-10
 
 # This is the version number used in the package, where a version number cannot
 # contain a '-'
-PKGVER=6.6.6_10
+PKGVER=6.7.7_10
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -100,6 +100,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
+  --sysconfdir=/etc \
   --program-prefix= \
   --with-x \
   --with-frozenpaths=no \
@@ -111,11 +112,26 @@ CXXFLAGS="$SLKCFLAGS" \
   --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS INSTALLDIRS=vendor || make INSTALLDIRS=vendor || exit 1
+# First, spam the running development system, as ImageMagick is unable to
+# properly link the utilities against a new shared library major version
+# otherwise which has led to several broken packages over the years:
+make install INSTALLDIRS=vendor || exit 1
+/sbin/ldconfig
+
+# Now build again against the new libraries and headers:
+make clean
+make $NUMJOBS INSTALLDIRS=vendor || make INSTALLDIRS=vendor || exit 1
 make install INSTALLDIRS=vendor DESTDIR=$PKG || exit 1
 
-# Lately ImageMagick has been smoking crack:
+# This should certainly not be included.
+# It stomps on the libtool package.
 rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libltdl.*
 
+# .la files in /usr/lib${LIBDIRSUFFIX}/ should be removed.
+# Other .la files should be left alone, as ImageMagick uses them internally
+# to locate modules.
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
 ( cd $PKG
   # Nothing but a perl upgrade should replace this (and maybe not even that)
   find . -name perllocal.pod | xargs rm -f
diff --git a/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild b/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild
index 812a7b16..a6f6c65c 100755
--- a/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild
+++ b/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,6 +24,24 @@
 # distribute this, and for all the great work!  :-)
 
 VERSION=$(basename $(ls firefox-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)
+RELEASEVER=$(echo $VERSION | cut -f 1 -d r | cut -f 1 -d b)
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mozilla-firefox
+
+# Figure out if this is a beta, or a release:
+if echo $VERSION | grep -q b ; then # we think it is a beta
+  if bzgrep -q mozilla-beta/ $CWD/firefox-$VERSION.source.tar.bz2 ; then
+    MOZVERS=${MOZVERS:-beta}
+  else # blindly assume it is a release
+    MOZVERS=${MOZVERS:-release}
+  fi
+else # release, no "b" in the tarball version:
+  MOZVERS=${MOZVERS:-release}
+fi
+
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
@@ -33,12 +51,6 @@ if [ -z "$ARCH" ]; then
        *) export ARCH=$( uname -m ) ;;
   esac
 fi
-BUILD=${BUILD:-2}
-
-MOZVERS=${MOZVERS:-2.0}
-RELEASEVER=$(echo $VERSION | cut -f 1 -d r)
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
 
 # Try to be gentle to the compiler, no optimizations:
 if [ "$ARCH" = "i486" ]; then
@@ -58,9 +70,7 @@ elif [ "$ARCH" = "armel" ]; then
   LIBDIRSUFFIX=""
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mozilla-firefox
+NUMJOBS=${NUMJOBS:-" -j7 "}
 
 rm -rf $PKG
 mkdir -p $TMP $PKG/usr/lib${LIBDIRSUFFIX}
@@ -92,12 +102,27 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+if gcc --version | grep -q "gcc (GCC) 4.7.0" ; then 
+ # Enable compiling with gcc-4.7.0:
+ sed -i '/fcntl.h/a#include <unistd.h>' \
+   ipc/chromium/src/base/{file_util_linux,message_pump_libevent,process_util_posix}.cc &&
+ sed -i '/sys\/time\.h/a#include <unistd.h>' ipc/chromium/src/base/time_posix.cc &&
+ sed -i 's#\"PRIxPTR#\" PRIxPTR#' layout/base/tests/TestPoisonArea.cpp &&
+ sed -i 's# ""##' browser/base/Makefile.in
+fi
+
+# Mozilla devs enforce using an objdir for building
+# and launching configure with the absolute path
+# https://developer.mozilla.org/en/Configuring_Build_Options#Building_with_an_objdir
+mkdir obj
+cd obj
 export MOZILLA_OFFICIAL="1" &&
 export BUILD_OFFICIAL="1" &&
 export MOZ_PHOENIX="1" &&
 export CFLAGS="$SLKCFLAGS" &&
 export CXXFLAGS="$SLKCFLAGS" &&
-./configure \
+export MOZ_MAKE_FLAGS="$NUMJOBS" &&
+$TMP/mozilla-$MOZVERS/configure \
   --enable-official-branding \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
@@ -105,7 +130,6 @@ export CXXFLAGS="$SLKCFLAGS" &&
   --with-system-zlib \
   --enable-application=browser \
   --enable-default-toolkit=cairo-gtk2 \
-  --enable-system-cairo \
   --enable-startup-notification \
   --enable-crypto \
   --enable-svg \
@@ -121,6 +145,7 @@ export CXXFLAGS="$SLKCFLAGS" &&
   --enable-single-profile \
   --disable-ldap \
   --disable-accessibility \
+  --disable-crashreporter \
   --disable-debug \
   --disable-tests \
   --disable-pedantic \
@@ -131,10 +156,17 @@ export CXXFLAGS="$SLKCFLAGS" &&
   # Complains about missing APNG support in Slackware's libpng:
   #--with-system-png \
 
+# This option breaks mozilla-12.0:
+# --enable-system-cairo \
+#
+
 #make -f client.mk build MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1
-make MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1
+make MOZ_MAKE_FLAGS="$NUMJOBS" $NUMJOBS || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# Exit obj directory:
+cd ..
+
 # We don't need these (just symlinks anyway):
 rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/firefox-devel-$RELEASEVER
 
@@ -146,11 +178,13 @@ rm -rf $PKG/usr/include
   if [ -d defaults/profile ]; then
     zcat $CWD/mimeTypes.rdf > defaults/profile/mimeTypes.rdf || exit 1
   fi
-  zcat $CWD/firefox.moz_plugin_path.diff.gz \
-    | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
-    | patch -p1 --verbose --backup --suffix=.orig || exit 1
+  # OK, this patch is useless on 7.x.  We'll float without it and see what happens.
+  # Perhaps it won't make a difference or should be worked around elsewhere.
+  #zcat $CWD/firefox.moz_plugin_path.diff.gz \
+  #  | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+  #  | patch -p1 --verbose --backup --suffix=.orig || exit 1
   # Clean up if the above patch was successful:
-  rm -f firefox.orig
+  #rm -f firefox.orig
 ) || exit
 
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
diff --git a/source/xap/mozilla-thunderbird/mimeTypes.rdf b/source/xap/mozilla-thunderbird/mimeTypes.rdf
deleted file mode 100644
index 366df44b..00000000
--- a/source/xap/mozilla-thunderbird/mimeTypes.rdf
+++ /dev/null
@@ -1,113 +0,0 @@
-<?xml version="1.0"?>  
-
-<!--
- This file is used as a persistent data store for helper application
- information about both MIME type and protocol scheme helpers.
-
- The root of the data are the two containers
- <RDF:Seq about="urn:mimetypes:root"/> and <RDF:Seq about="urn:schemes:root"/>.
-
- These contain one <RDF:li/> entry per MIME type/protocol.  Each <RDF:li/> entry
- corresponds to a "urn:<class>:<type>" resource, where <class> is either
- "mimetype" or "scheme" and <type> is either a MIME type in "major/minor" format
- or a scheme.  For example, for HTML we would have "urn:mimetype:text/html",
- while for mailto: we would have "urn:scheme:mailto".
-
- Typically, this resource will be in the <RDF:Description/> node which has the
- corresponding "about" attribute.
-
- Each "urn:<class>:<type>" resource can have the following properties:
-
-   NC:Value - the MIME type or scheme string
-   NC:editable - a "true" or "false" depending on whether this entry is
-                 editable
-   NC:description - a description of the type ("HTML Document" for text/html)
-   NC:fileExtensions - for MIME types, there will be one of these properties
-                       per extension that corresponds to this MIME type,
-                       each one having a single extension as its value.
-   NC:handlerProp - the way the type should be handled.  This corresponds to a
-                    "urn:<class>:handler:<type>" resource.  Eg, the way HTML is
-                    handled would be stored in the
-                    "urn:mimetype:handler:text/html" resource.
-
- Each "urn:<class>:handler:<type>" resource can have the following properties:
-
-   NC:useSystemDefault - "true" if we should handle per default OS setting,
-                          "false" or not set otherwise
-   NC:saveToDisk - "true" if the data should be saved to disk, "false" or not
-                   set otherwise.
-     (Note - if both of these are false, that means "open in helper app")
-   NC:alwaysAsk - "true" if the user should always be prompted before handling
-                  data of this type, false otherwise.
-   NC:externalApplication - the preferred helper application to use for this
-                            type.  This corresponds to a
-                            "urn:<class>:externalApplication:<type>" resource.
-   NC:possibleApplication - a helper application that can be used for this type.
-                            Since there can be multiple possible applications,
-                            there can be multiple assertions in the graph with
-                            this property for a given handler resource.
-
- Each "urn:<class>:externalApplication:<type>" resource, and each resource
- that represents a possible application, can have the following property:
-
-   NC:prettyName - the "pretty name" of the application ("Acrobat Reader" for
-                   /usr/bin/acroread, eg).
-
- If the resource represents a local application, then it can have the following
- property:
-
-   NC:path - the path to the application on the local filesystem, for example
-             /usr/bin/test or C:\windows\system32\cmd.exe.
-
- If the resource represents a web application, then it can have the following
- property:
-
-   NC:uriTemplate - a URI pointing to the web application to which the type
-                    should be handed off, with %s in the template representing
-                    the place where the content should be inserted. For example,
-                    here is a URI template for a service that lets you email
-                    an address in a mailto: link:
-                      http://www.example.com/sendmail?link=%s
--->
-			
-<RDF:RDF xmlns:RDF="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-         xmlns:NC="http://home.netscape.com/NC-rdf#">
-
-  <RDF:Description about="urn:mimetypes"> 
-    <NC:MIME-types> 
-      <RDF:Seq about="urn:mimetypes:root"> 
-      </RDF:Seq>
-    </NC:MIME-types> 
-  </RDF:Description> 
-
-  <RDF:Description RDF:about="urn:scheme:handler:http"
-                   NC:alwaysAsk="false">
-    <NC:externalApplication RDF:resource="urn:scheme:externalApplication:http"/>
-  </RDF:Description>
-  <RDF:Description RDF:about="urn:scheme:externalApplication:http"
-                   NC:prettyName="firefox"
-                   NC:path="/usr/bin/firefox" />
-  <RDF:Description RDF:about="urn:schemes">
-    <NC:Protocol-Schemes RDF:resource="urn:schemes:root"/>
-  </RDF:Description>
-  <RDF:Description RDF:about="urn:scheme:http"
-                   NC:value="http">
-    <NC:handlerProp RDF:resource="urn:scheme:handler:http"/>
-  </RDF:Description>
-
-  <RDF:Description RDF:about="urn:scheme:handler:https"
-                   NC:alwaysAsk="false">
-    <NC:externalApplication RDF:resource="urn:scheme:externalApplication:https"/>
-  </RDF:Description>
-  <RDF:Description RDF:about="urn:scheme:externalApplication:https"
-                   NC:prettyName="firefox"
-                   NC:path="/usr/bin/firefox" />
-  <RDF:Description RDF:about="urn:schemes">
-    <NC:Protocol-Schemes RDF:resource="urn:schemes:root"/>
-  </RDF:Description>
-  <RDF:Description RDF:about="urn:scheme:https"
-                   NC:value="https">
-    <NC:handlerProp RDF:resource="urn:scheme:handler:https"/>
-  </RDF:Description>
-
-</RDF:RDF>
diff --git a/source/xap/mozilla-thunderbird/mozilla-firefox.xpcom_arm.patch b/source/xap/mozilla-thunderbird/mozilla-firefox.xpcom_arm.patch
new file mode 100644
index 00000000..7309b55a
--- /dev/null
+++ b/source/xap/mozilla-thunderbird/mozilla-firefox.xpcom_arm.patch
@@ -0,0 +1,18 @@
+--- a/xpcom/glue/objs.mk	
++++ a/xpcom/glue/objs.mk	
+@@ -71,13 +71,13 @@ XPCOM_GLUENS_SRC_LCPPSRCS =      \
+   SSE.cpp                        \
+   unused.cpp                     \
+   nsProxyRelease.cpp             \
+   nsTextFormatter.cpp            \
+   GenericFactory.cpp             \
+   FileUtils.cpp                  \
+   $(NULL)
+ 
+-ifeq (arm,$(TARGET_CPU))
++ifneq (,$(filter arm%,$(TARGET_CPU)))
+ XPCOM_GLUENS_SRC_LCPPSRCS += arm.cpp
+ endif
+ 
+ XPCOM_GLUENS_SRC_CPPSRCS = $(addprefix $(topsrcdir)/xpcom/glue/,$(XPCOM_GLUENS_SRC_LCPPSRCS))
+
diff --git a/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild b/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild
index d36fe937..f0e910c4 100755
--- a/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild
+++ b/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,26 +20,43 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
 # Thanks to the folks at the Mozilla Foundation for permission to
 # distribute this, and for all the great work!  :-)
 
-VERSION=$(basename $(ls thunderbird-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)
-BUILD=${BUILD:-2}
+TARBALLVER=$(basename $(ls thunderbird-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)
+# Strip the end from beta versions:
+VERSION=$(echo $TARBALLVER | cut -f 1 -d b)
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mozilla-thunderbird
+
+# Figure out if this is a beta, or a release:
+if echo $TARBALLVER | grep -q b ; then # we think it is a beta
+  if bzgrep -q comm-beta/ $CWD/thunderbird-$TARBALLVER.source.tar.bz2 ; then
+    MOZVERS=${MOZVERS:-beta}
+  else # blindly assume it is a release
+    MOZVERS=${MOZVERS:-release}
+  fi
+else # release, no "b" in the tarball version:
+  MOZVERS=${MOZVERS:-release}
+fi
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
+    *)       export ARCH=$MARCH ;;
   esac
 fi
 
-MOZVERS=${MOZVERS:-1.9.2}
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
 # Try to be gentle to the compiler, no optimizations:
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O"
@@ -56,18 +73,19 @@ elif [ "$ARCH" = "arm" ]; then
 elif [ "$ARCH" = "armel" ]; then
   SLKCFLAGS="-O2 -march=armv4t"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mozilla-thunderbird
+NUMJOBS=${NUMJOBS:-" -j7 "}
 
 rm -rf $PKG
 mkdir -p $TMP $PKG/usr/lib${LIBDIRSUFFIX}
 
 cd $TMP
 rm -rf comm-$MOZVERS
-tar xvf $CWD/thunderbird-$VERSION.source.tar.bz2 || exit 1
+tar xvf $CWD/thunderbird-$TARBALLVER.source.tar.bz2 || exit 1
 cd comm-$MOZVERS || exit 1
 
 # Fix a long standing bug that's prevented staying current on GTK+.
@@ -80,6 +98,16 @@ endif
 
 EOF
 
+# Arch-dependent patches:
+case "$ARCH" in
+    armv7hl) ARCH_CONFIG="--with-arch=armv7-a --with-float-abi=hard --with-fpu=vfpv3-d16 --disable-elf-hack"
+             # Make firefox compile on ARM platforms lacking neon support:
+             zcat $CWD/mozilla-firefox.xpcom_arm.patch.gz | patch -p1 --verbose || exit 1
+             ;;
+    *)       ARCH_CONFIG=" "
+             ;;
+esac
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -87,12 +115,38 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+if gcc --version | grep -q "gcc (GCC) 4.7.0" ; then
+ # Enable compiling with gcc-4.7.0:
+ sed -i '/fcntl.h/a#include <unistd.h>' \
+   mozilla/ipc/chromium/src/base/{file_util_linux,message_pump_libevent,process_util_posix}.cc &&
+ sed -i '/sys\/time\.h/a#include <unistd.h>' mozilla/ipc/chromium/src/base/time_posix.cc &&
+ sed -i 's#\"PRIxPTR#\" PRIxPTR#g' mozilla/layout/base/tests/TestPoisonArea.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/base/search/src/nsMsgSearchAdapter.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/base/src/nsMsgFolderCompactor.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/compose/src/nsSmtpProtocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapMailFolder.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapProtocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapServerResponseParser.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/local/src/nsPop3Protocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/mime/src/mimedrft.cpp &&
+ sed -i 's#\"MSG_LINEBREAK#\" MSG_LINEBREAK#g' mailnews/mime/src/mimemult.cpp &&
+ sed -i 's#\"MSG_LINEBREAK#\" MSG_LINEBREAK#g' mailnews/base/src/nsMsgFolderCompactor.cpp &&
+ sed -i 's# ""##' mozilla/browser/base/Makefile.in
+fi
+
+# Mozilla devs enforce using an objdir for building
+# and launching configure with the absolute path
+# https://developer.mozilla.org/en/Configuring_Build_Options#Building_with_an_objdir
+mkdir obj
+cd obj
+export MOZILLA_DIR=$TMP/comm-$MOZVERS/mozilla &&
 export MOZILLA_OFFICIAL="1" &&
 export BUILD_OFFICIAL="1" &&
 export MOZ_PHOENIX="1" &&
 export CFLAGS="$SLKCFLAGS" &&
 export CXXFLAGS="$SLKCFLAGS" &&
-./configure \
+export MOZ_MAKE_FLAGS="$NUMJOBS" &&
+$TMP/comm-$MOZVERS/configure \
   --enable-official-branding \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
@@ -102,19 +156,19 @@ export CXXFLAGS="$SLKCFLAGS" &&
   --enable-default-toolkit=cairo-gtk2 \
   --enable-startup-notification \
   --enable-crypto \
+  --enable-ldap \
+  --enable-libxul \
   --enable-svg \
   --enable-canvas \
   --enable-xft \
   --enable-xinerama \
-  --enable-ldap \
   --enable-optimize \
   --enable-reorder \
-  --enable-static \
   --enable-strip \
-  --enable-system-cairo \
   --enable-cpp-rtti \
   --enable-single-profile \
   --disable-accessibility \
+  --disable-crashreporter \
   --disable-debug \
   --disable-tests \
   --disable-logging \
@@ -123,21 +177,28 @@ export CXXFLAGS="$SLKCFLAGS" &&
   --disable-profilesharing
   # Complains about missing APNG support in Slackware's libpng:
   #--with-system-png \
+  # Broken with 12.0:
+  #--enable-system-cairo \
 
 #make -f client.mk build MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1
-make MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1
+make $NUMJOBS || exit 1
 make install DESTDIR=$PKG || exit 1
 
+# Exit obj directory:
+cd ..
+
 # We don't need these (just symlinks anyway):
 rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-devel-$VERSION
 
 # Nor these:
 rm -rf $PKG/usr/include
 
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION
-  cp -a defaults/profile/mimeTypes.rdf defaults/profile/mimeTypes.rdf.orig
-  zcat $CWD/mimeTypes.rdf > defaults/profile/mimeTypes.rdf || exit 1
-) || exit 1
+# Thunderbird 3.x cruft?
+# If we still need something like this (and you know what we need :), let me know.
+#( cd $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION
+#  cp -a defaults/profile/mimeTypes.rdf defaults/profile/mimeTypes.rdf.orig
+#  zcat $CWD/mimeTypes.rdf > defaults/profile/mimeTypes.rdf || exit 1
+#) || exit 1
 
 mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
 mkdir -p $PKG/usr/share/applications
@@ -176,5 +237,5 @@ mkdir $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/mozilla-thunderbird-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/mozilla-thunderbird-$TARBALLVER-$ARCH-$BUILD.txz
 
diff --git a/source/xap/network-manager-applet/doinst.sh b/source/xap/network-manager-applet/doinst.sh
new file mode 100644
index 00000000..6da6f0c0
--- /dev/null
+++ b/source/xap/network-manager-applet/doinst.sh
@@ -0,0 +1,20 @@
+schema_install() {
+  SCHEMA="$1"
+  GCONF_CONFIG_SOURCE="xml::etc/gconf/gconf.xml.defaults" \
+  chroot . gconftool-2 --makefile-install-rule \
+    /etc/gconf/schemas/$SCHEMA \
+    1>/dev/null 2> /dev/null
+}
+
+schema_install nm-applet.schemas
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications 1>/dev/null 2> /dev/null
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor 1>/dev/null 2> /dev/null
+  fi
+fi
+
diff --git a/source/xap/network-manager-applet/network-manager-applet.SlackBuild b/source/xap/network-manager-applet/network-manager-applet.SlackBuild
new file mode 100755
index 00000000..70221596
--- /dev/null
+++ b/source/xap/network-manager-applet/network-manager-applet.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Slackware build script for network-manager-applet
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=network-manager-applet
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-gtkver=2 \
+  --disable-static \
+  --disable-schemas-install \
+  --enable-more-warnings=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS CONTRIBUTING COPYING ChangeLog INSTALL NEWS README \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xap/network-manager-applet/slack-desc b/source/xap/network-manager-applet/slack-desc
new file mode 100644
index 00000000..ad8c8f7d
--- /dev/null
+++ b/source/xap/network-manager-applet/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                      |-----handy-ruler------------------------------------------------------|
+network-manager-applet: network-manager-applet (NetworkManager Applet)
+network-manager-applet:
+network-manager-applet: nm-applet is a gui frontend for NetworkManager.
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
+network-manager-applet:
diff --git a/source/xap/pan/pan.SlackBuild b/source/xap/pan/pan.SlackBuild
index 0aab423c..b3bbe857 100755
--- a/source/xap/pan/pan.SlackBuild
+++ b/source/xap/pan/pan.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -59,6 +59,8 @@ rm -rf ${PKGNAM}-${VERSION}
 tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
+zcat $CWD/pan.gcc47.diff.gz | patch -p1 --verbose || exit 1
+
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
@@ -74,6 +76,7 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var/lib \
   --sysconfdir=/etc \
   --mandir=/usr/man \
+  --with-gnutls \
   --program-prefix= \
   --program-suffix= \
   --build=$ARCH-slackware-linux
diff --git a/source/xap/pan/pan.gcc47.diff b/source/xap/pan/pan.gcc47.diff
new file mode 100644
index 00000000..5c57a381
--- /dev/null
+++ b/source/xap/pan/pan.gcc47.diff
@@ -0,0 +1,10 @@
+--- ./pan/data/cert-store.cc.orig	2012-06-29 17:24:54.000000000 -0500
++++ ./pan/data/cert-store.cc	2012-07-10 12:43:12.768183671 -0500
+@@ -20,6 +20,7 @@
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+  */
+ 
++#include <unistd.h>
+ #include <string>
+ 
+ //#include <glib/giochannel.h>
diff --git a/source/xap/pan/slack-desc b/source/xap/pan/slack-desc
index c4336adb..77372ab9 100644
--- a/source/xap/pan/slack-desc
+++ b/source/xap/pan/slack-desc
@@ -15,5 +15,5 @@ pan:
 pan:
 pan:
 pan:
-pan:
+pan: Homepage:  http://pan.rebelbase.com
 pan:
diff --git a/source/xap/pidgin/fix-gmain_h-compile-error.diff b/source/xap/pidgin/fix-gmain_h-compile-error.diff
new file mode 100644
index 00000000..1e313cde
--- /dev/null
+++ b/source/xap/pidgin/fix-gmain_h-compile-error.diff
@@ -0,0 +1,17 @@
+Since glib-2.32, this is a common error:
+  In file included from rsa_nss.c:27:0:
+  /usr/include/glib-2.0/glib/gmain.h:21:2: error: #error "Only <glib.h> can be included directly."
+Let's fix it :)
+
+diff -Nur pidgin-encryption-3.1.orig/rsa_nss.c pidgin-encryption-3.1/rsa_nss.c
+--- pidgin-encryption-3.1.orig/rsa_nss.c	2010-04-25 20:53:46.000000000 -0500
++++ pidgin-encryption-3.1/rsa_nss.c	2012-05-01 22:58:18.033710803 -0500
+@@ -24,7 +24,7 @@
+ #include <debug.h>
+ #include <gtkdialogs.h>
+ 
+-#include "glib/gmain.h"
++#include <glib.h>
+ 
+ #include <string.h>
+ #include <assert.h>
diff --git a/source/xap/pidgin/pidgin.SlackBuild b/source/xap/pidgin/pidgin.SlackBuild
index bfefef2e..5fa20495 100755
--- a/source/xap/pidgin/pidgin.SlackBuild
+++ b/source/xap/pidgin/pidgin.SlackBuild
@@ -79,9 +79,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
-# Allow certificates signed with rsa-md5:
-zcat $CWD/purple-allow-sign-rsa-md5.patch.gz | patch -p0 --verbose || exit 1
-
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -92,8 +89,12 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-dot=no \
   --disable-schemas-install \
   --enable-dbus \
-  --enable-gnutls=yes \
-  --enable-nss=no \
+  --enable-gnutls=no \
+  --enable-nss=yes \
+  --with-nss-includes="$(pkg-config --variable=includedir nss)" \
+  --with-nss-libs=/usr/lib${LIBDIRSUFFIX}/ \
+  --with-nspr-includes="$(pkg-config --variable=includedir nspr)" \
+  --with-nspr-libs=/usr/lib${LIBDIRSUFFIX}/ \
   --disable-vv \
   --enable-gtkspell \
   --enable-cyrus-sasl \
@@ -113,9 +114,9 @@ make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Fix misplaced items:
-eval $(perl '-V:archlib')
+eval $(perl '-V:installvendorlib')
 eval $(perl '-V:privlib')
-VENDORPERL="$(echo $archlib | sed -e "s/perl5/perl5\/vendor_perl/")"
+VENDORPERL="$(echo $installvendorlib)"
 
 mkdir -vpm755 $PKG/$VENDORPERL/
 find $PKG -type f -name perllocal.pod -exec mv -fv {} $PKG/$VENDORPERL/Pidgin.pod \;
@@ -156,6 +157,7 @@ done
   rm -rf pidgin-encryption-$PIDGINENC
   tar xvf $CWD/pidgin-encryption-$PIDGINENC.tar.gz || exit 1
   cd pidgin-encryption-$PIDGINENC
+  zcat $CWD/fix-gmain_h-compile-error.diff.gz | patch -p1 --verbose || exit 1
   PIDGIN_CFLAGS="-I${PKG}/usr/include/pidgin" \
   PIDGIN_LIBS="-L${PKG}/usr/lib${LIBDIRSUFFIX}" \
   PURPLE_CFLAGS="-I${PKG}/usr/include/libpurple" \
@@ -164,10 +166,10 @@ done
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --disable-static \
-  --with-nss-includes=/usr/include/seamonkey/nss \
-  --with-nspr-includes=/usr/include/seamonkey/nspr \
-  --with-nss-libs=/usr/lib${LIBDIRSUFFIX}/seamonkey/ \
-  --with-nspr-libs=/usr/lib${LIBDIRSUFFIX}/seamonkey/ \
+  --with-nss-includes="$(pkg-config --variable=includedir nss)" \
+  --with-nss-libs=/usr/lib${LIBDIRSUFFIX}/ \
+  --with-nspr-includes="$(pkg-config --variable=includedir nspr)" \
+  --with-nspr-libs=/usr/lib${LIBDIRSUFFIX}/ \
   --program-prefix="" \
   --program-suffix="" \
   --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1
diff --git a/source/xap/pidgin/purple-allow-sign-rsa-md5.patch b/source/xap/pidgin/purple-allow-sign-rsa-md5.patch
deleted file mode 100644
index d882a6e8..00000000
--- a/source/xap/pidgin/purple-allow-sign-rsa-md5.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- libpurple/plugins/ssl/ssl-gnutls.c.old	2008-10-17 18:58:31.000000000 +0200
-+++ libpurple/plugins/ssl/ssl-gnutls.c	2008-10-17 18:53:03.000000000 +0200
-@@ -693,7 +693,8 @@
- 					(Verisign and possibly others have
- 					root certificates that predate the
- 					current standard) */
--				     GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT,
-+				     GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT 
-+				     | GNUTLS_VERIFY_ALLOW_SIGN_RSA_MD5,
- 				     &verify);
- 
- 	if (ret != 0) {
diff --git a/source/xap/rdesktop/rdesktop.CVE-2011-1595.diff b/source/xap/rdesktop/rdesktop.CVE-2011-1595.diff
deleted file mode 100644
index 0db8c3bc..00000000
--- a/source/xap/rdesktop/rdesktop.CVE-2011-1595.diff
+++ /dev/null
@@ -1,22 +0,0 @@
---- ./disk.c.orig	2008-02-15 18:13:25.000000000 -0600
-+++ ./disk.c	2011-04-20 20:27:55.978000772 -0500
-@@ -356,6 +356,19 @@
- 		filename[strlen(filename) - 1] = 0;
- 	sprintf(path, "%s%s", g_rdpdr_device[device_id].local_path, filename);
- 
-+        /* Protect against mailicous servers:
-+           somelongpath/..     not allowed
-+           somelongpath/../b   not allowed
-+           somelongpath/..b    in principle ok, but currently not allowed
-+           somelongpath/b..    ok
-+           somelongpath/b..b   ok
-+           somelongpath/b../c  ok
-+         */
-+        if (strstr(path, "/.."))
-+        {
-+                return RD_STATUS_ACCESS_DENIED;
-+        }
-+
- 	switch (create_disposition)
- 	{
- 		case CREATE_ALWAYS:
diff --git a/source/xap/rdesktop/rdesktop.SlackBuild b/source/xap/rdesktop/rdesktop.SlackBuild
index 5e1ae2e2..ba6c6772 100755
--- a/source/xap/rdesktop/rdesktop.SlackBuild
+++ b/source/xap/rdesktop/rdesktop.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,8 +22,8 @@
 
 
 PKGNAM=rdesktop
-VERSION=${VERSION:-1.6.0}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -56,11 +56,9 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
 cd ${PKGNAM}-$VERSION || exit 1
 
-zcat $CWD/rdesktop.CVE-2011-1595.diff.gz | patch -p1 --verbose || exit 1
-
 # Make sure ownerships and permissions are sane:
 chown -R root:root .
 find . \
@@ -76,6 +74,7 @@ CFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --with-sound=alsa \
   --enable-smartcard \
+  --with-ipv6 \
   --mandir=/usr/man \
   --build=$ARCH-slackware-linux
 
diff --git a/source/xap/rxvt/rxvt.SlackBuild b/source/xap/rxvt/rxvt.SlackBuild
index 81d39485..defc62b5 100755
--- a/source/xap/rxvt/rxvt.SlackBuild
+++ b/source/xap/rxvt/rxvt.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,18 +21,39 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=2.7.10
-ARCH=${ARCH:-x86_64}
+PKGNAM=rxvt
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-4}
 
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
-if [ "$ARCH" = "i486" ]; then
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+else
+  SLKCFLAGS="-O2"
 fi
 
 CWD=$(pwd)
diff --git a/source/xap/sane/sane-backends-1.0.22-v4l.diff b/source/xap/sane/sane-backends-1.0.22-v4l.diff
new file mode 100644
index 00000000..4e240e0c
--- /dev/null
+++ b/source/xap/sane/sane-backends-1.0.22-v4l.diff
@@ -0,0 +1,64 @@
+From 26c69b228b29f612faf4b0cc85db969ee7cc4ea6 Mon Sep 17 00:00:00 2001
+From: Nils Philippsen <nils@redhat.com>
+Date: Mon, 14 Mar 2011 13:35:05 +0100
+Subject: [PATCH] patch: v4l
+
+Squashed commit of the following:
+
+commit 23381932c76846191b42a48e505b37cd74711265
+Author: Julien BLACHE <jb@jblache.org>
+Date:   Wed Feb 16 19:37:43 2011 +0100
+
+    Fix v4l build with libv4l 0.8.3+
+
+    (cherry picked from commit c5ca46c2d1be78c651afb843cc834cf2b5b24953)
+
+    Conflicts:
+
+    	ChangeLog
+
+    Signed-off-by: Nils Philippsen <nils@redhat.com>
+---
+ backend/v4l.c |    3 +--
+ backend/v4l.h |    3 ++-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/backend/v4l.c b/backend/v4l.c
+index 6510ef0..38595ed 100644
+--- a/backend/v4l.c
++++ b/backend/v4l.c
+@@ -84,9 +84,8 @@
+ #include "../include/sane/sanei_config.h"
+ #define V4L_CONFIG_FILE "v4l.conf"
+ 
+-#include "v4l.h"
+-
+ #include <libv4l1.h>
++#include "v4l.h"
+ 
+ static const SANE_Device **devlist = NULL;
+ static int num_devices;
+diff --git a/backend/v4l.h b/backend/v4l.h
+index 588b96e..6aee586 100644
+--- a/backend/v4l.h
++++ b/backend/v4l.h
+@@ -29,6 +29,7 @@
+ #ifndef v4l_h
+ #define v4l_h
+ 
++#ifndef __LINUX_VIDEODEV_H
+ /* Kernel interface */
+ /* Only the stuff we need. For more features, more defines are needed */
+ 
+@@ -165,7 +166,7 @@ struct video_channel
+ 
+ 
+ /* end of kernel interface */
+-
++#endif /* !__LINUX_VIDEODEV_H */
+ 
+ #include <../include/sane/sane.h>
+ 
+-- 
+1.7.4
+
diff --git a/source/xap/sane/sane.SlackBuild b/source/xap/sane/sane.SlackBuild
index 613393dc..be9dd725 100755
--- a/source/xap/sane/sane.SlackBuild
+++ b/source/xap/sane/sane.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 VERSION=1.0.22
 BACKVER=1.0.22
 FRONTVER=1.0.14
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -69,6 +69,9 @@ chown -R root:root .
 # everything else catches up with the API change...
 zcat $CWD/sane-frontends-1.0.14-sane_cap_always_settable.diff.gz | patch -p1 || exit 1
 
+# Fix building against v4l-utils-0.8.3:
+zcat $CWD/sane-backends-1.0.22-v4l.diff.gz | patch -p1 --verbose || exit 1
+
 CFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
@@ -87,16 +90,25 @@ make $NUMJOBS || make || exit 1
 make install || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Add the default udev rules
+# Add the default udev rules.  Use group "lp" rather than "scanner" to avoid
+# breaking CUPS access for multifunction printer/scanner devices (possibly
+# the most common type of scanner these days)
 mkdir -p $PKG/lib/udev/rules.d
-cat tools/udev/libsane.rules > $PKG/lib/udev/rules.d/80-libsane.rules
+cat tools/udev/libsane.rules \
+  | sed -e "s/GROUP=\"scanner\"/GROUP=\"lp\"/g" \
+  | sed -e "s/MODE=\"0664\"/MODE=\"0660\"/g" \
+  > $PKG/lib/udev/rules.d/80-libsane.rules
 
-# Add the hal fdi file
+# Add the hal fdi file:
 mkdir -p $PKG/usr/share/hal/fdi/policy/10osvendor/
 cat tools/hal/libsane.fdi \
   > $PKG/usr/share/hal/fdi/policy/10osvendor/10-libsane.fdi
 
-# Now let's build the frontends
+# Install the pkgconfig file:
+install -D -m644 tools/sane-backends.pc \
+     $PKG/usr/lib$LIBDIRSUFFIX/pkgconfig/sane-backends.pc
+
+# Now let's build the frontends:
 cd $TMP 
 rm -rf sane-frontends-$FRONTVER
 tar xvf $CWD/sane-frontends-$FRONTVER.tar.bz2 || exit 1
diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-libxul.pc b/source/xap/seamonkey/pkgconfig/seamonkey-libxul.pc
new file mode 100644
index 00000000..0c990042
--- /dev/null
+++ b/source/xap/seamonkey/pkgconfig/seamonkey-libxul.pc
@@ -0,0 +1,11 @@
+prefix=/usr
+libdir=/usr/@LIB@/seamonkey-@VERSION@
+includedir=/usr/include/seamonkey-@VERSION@
+idldir=/usr/share/idl/seamonkey-@VERSION@
+
+Name: libxul
+Description: The Mozilla Runtime and Embedding Engine
+Version: @VERSION@
+Requires: seamonkey-nspr >= 4.7.1
+Libs: -L${libdir} -lxul -lxpcom
+Cflags: -I${includedir} -fshort-wchar
diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc b/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc
index b929f202..f5bf0993 100644
--- a/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc
+++ b/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc
@@ -7,5 +7,5 @@ Name: NSS
 Description: Mozilla Network Security Services
 Version: @VERSION@
 Requires: seamonkey-nspr >= 4.7.1
-Libs: -L${libdir} -lnss3 -lsmime3 -lssl3 -lsoftokn3
+Libs: -L${libdir} -lnss3 -lsmime3 -lssl3 -lsoftokn3 -lnssutil3
 Cflags: -I${includedir}/nss
diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc b/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc
index 4550444a..bbdb1f41 100644
--- a/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc
+++ b/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc
@@ -7,4 +7,4 @@ Name: Mozilla Plug-In API
 Description: Mozilla Plug-In API
 Version: @VERSION@
 Requires: seamonkey-nspr >= 4.7.1
-Cflags: -I${includedir}/java -I${includedir}/plugin
+Cflags: -I${includedir}/java -I${includedir}/plugin -DXP_UNIX 
diff --git a/source/xap/seamonkey/seamonkey.SlackBuild b/source/xap/seamonkey/seamonkey.SlackBuild
index 6b4173e2..afc1bc96 100755
--- a/source/xap/seamonkey/seamonkey.SlackBuild
+++ b/source/xap/seamonkey/seamonkey.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,9 +20,11 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-VERSION=${VERSION:-$(basename $(ls seamonkey-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)}
-COMM=${COMM:-central}
-BUILD=${BUILD:-2}
+TARBALLVER=${VERSION:-$(basename $(ls seamonkey-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)}
+# Strip the end from beta versions:
+VERSION=$(echo $TARBALLVER | cut -f 1 -d b)
+COMM=${COMM:-release}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -50,7 +52,7 @@ mkdir -p $TMP $PKG/usr
 
 cd $TMP
 rm -rf comm-$COMM
-tar xvf $CWD/seamonkey-${VERSION}.source.tar.?z* || exit 1
+tar xvf $CWD/seamonkey-${TARBALLVER}.source.tar.?z* || exit 1
 cd comm-$COMM || exit 1
 
 # Make sure the perms/ownerships are sane:
@@ -71,15 +73,45 @@ endif
 
 EOF
 
+if gcc --version | grep -q "gcc (GCC) 4.7.0" ; then
+ # Enable compiling with gcc-4.7.0:
+ sed -i '/fcntl.h/a#include <unistd.h>' \
+   mozilla/ipc/chromium/src/base/{file_util_linux,message_pump_libevent,process_util_posix}.cc &&
+ sed -i '/sys\/time\.h/a#include <unistd.h>' mozilla/ipc/chromium/src/base/time_posix.cc &&
+ sed -i 's#\"PRIxPTR#\" PRIxPTR#g' mozilla/layout/base/tests/TestPoisonArea.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/base/search/src/nsMsgSearchAdapter.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/base/src/nsMsgFolderCompactor.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/compose/src/nsSmtpProtocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapMailFolder.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapProtocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/imap/src/nsImapServerResponseParser.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/local/src/nsPop3Protocol.cpp &&
+ sed -i 's#\"CRLF#\" CRLF#g' mailnews/mime/src/mimedrft.cpp &&
+ sed -i 's#\"MSG_LINEBREAK#\" MSG_LINEBREAK#g' mailnews/mime/src/mimemult.cpp &&
+ sed -i 's#\"MSG_LINEBREAK#\" MSG_LINEBREAK#g' mailnews/base/src/nsMsgFolderCompactor.cpp &&
+ sed -i 's# ""##' mozilla/browser/base/Makefile.in
+fi
+
 chown -R root:root .
+
+# Mozilla devs enforce using an objdir for building
+# and launching configure with the absolute path
+# https://developer.mozilla.org/en/Configuring_Build_Options#Building_with_an_objdir
+mkdir obj
+cd obj
 BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 \
-./configure --prefix=/usr \
+$TMP/comm-$COMM/configure \
+  --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --enable-optimize=-O2 \
+  --enable-cpp-rtti \
+  --enable-default-toolkit=cairo-gtk2 \
+  --enable-startup-notification \
   --disable-debug \
   --with-default-mozilla-five-home=/usr/lib${LIBDIRSUFFIX}/seamonkey-${VERSION} \
   --enable-strip \
   --disable-tests \
+  --disable-crashreporter \
   --enable-svg \
   --enable-canvas \
   --disable-short-wchar \
@@ -99,6 +131,7 @@ BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 \
   --target=$ARCH-slackware-linux \
   --build=$ARCH-slackware-linux
 
+  # --enable-system-cairo \
   # --with-system-png
 make $NUMJOBS || exit 1
 DESTDIR=$PKG make install || exit 1
@@ -113,16 +146,25 @@ cp -aL mozilla/dist/include/*.h $PKG/usr/include/seamonkey-${VERSION}
 cp -aL mozilla/dist/sdk/include/* $PKG/usr/include/seamonkey-${VERSION}
 # compat symlinks
 ( cd $PKG/usr/include/seamonkey-${VERSION}
-  ln -sf . js
+  # make install seems to install js headers into a directory now, so don't make a symlink:
+  #ln -sf . js
+  # Relocate anything that might be in the nss directory, and replace the directory with a symlink.
+  # make install was putting an empty directory here, which was breaking other compiles.
+  if [ -d nss ]; then
+    mv nss/* .
+    rmdir nss
+  fi 
   ln -sf . nss
   ln -sf . plugin
   ln -sf . xpcom
 )
-#( cd $PKG/usr/include/seamonkey-${VERSION}/plugin
-#  for file in ../j*.h ; do
-#    ln -sf $file .
-#  done
-#)
+
+# Exit obj directory:
+cd ..
+
+# We don't need this stuff in the package:
+rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/seamonkey-devel-$VERSION
+
 chown -R root:root $PKG/usr/include/seamonkey-${VERSION}
 find $PKG/usr/include/seamonkey-${VERSION} -name "*.h" -type f -exec chmod 644 {} \;
 # Create a more generic include files symlink:
@@ -144,10 +186,12 @@ done
 # Add symlinks for the pkgconfig files:
 ( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
   ln -s seamonkey-js.pc js.pc
-  ln -s seamonkey-nspr.pc nspr.pc
-  ln -s seamonkey-nss.pc nss.pc
+  ln -s seamonkey-libxul.pc libxul.pc
   ln -s seamonkey-plugin.pc plugin.pc
   ln -s seamonkey-xpcom.pc xpcom.pc
+  # These are now provided by the mozilla-nss package:
+  #ln -s seamonkey-nspr.pc nspr.pc
+  #ln -s seamonkey-nss.pc nss.pc
 )
 
 # Compress and if needed symlink the man pages:
@@ -201,7 +245,7 @@ zcat $CWD/doinst.sh.gz | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
   > $PKG/install/doinst.sh
 
 cd $TMP/package-seamonkey
-/sbin/makepkg -l y -c n -p $TMP/seamonkey-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n -p $TMP/seamonkey-$TARBALLVER-$ARCH-$BUILD.txz
 
 # Create a standalone seamonkey-solibs package for RPM, gxine, etc.
 rm -r $TMP/package-seamonkey-solibs
@@ -231,14 +275,14 @@ seamonkey-solibs: seamonkey-solibs (Shared libraries from Seamonkey)
 seamonkey-solibs:
 seamonkey-solibs: This package contains a subset of the shared libraries from Seamonkey
 seamonkey-solibs: to provide runtime support for programs that require nss, nspr, and
-seamonkey-solibs: js.  These libraries are used in programs like RPM and gxine, and can
-seamonkey-solibs: be used in others.  This package is built from the Seamonkey sources
-seamonkey-solibs: and is provided as a standalone runtime package for people who do not
-seamonkey-solibs: want to install the entire seamonkey package (as for server use).
+seamonkey-solibs: js.  This package is built from the Seamonkey sources and is provided
+seamonkey-solibs: as a standalone runtime package for people who do not want to install
+seamonkey-solibs: the entire seamonkey package (as for server use).
 seamonkey-solibs:
 seamonkey-solibs: This package is runtime only.  The include files and other files for
 seamonkey-solibs: development can be found in the seamonkey package.
+seamonkey-solibs:
 EOF
 cd $TMP/package-seamonkey-solibs
-/sbin/makepkg -l y -c n -p $TMP/seamonkey-solibs-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n -p $TMP/seamonkey-solibs-$TARBALLVER-$ARCH-$BUILD.txz
 
diff --git a/source/xap/seyon/seyon.SlackBuild b/source/xap/seyon/seyon.SlackBuild
index 656d2ff9..f2435b19 100755
--- a/source/xap/seyon/seyon.SlackBuild
+++ b/source/xap/seyon/seyon.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2002-2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2002-2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,19 +21,45 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
+PKGNAM=seyon
 VERSION=2.20c
-ARCH=${ARCH:-x86_64}
 BUILD=${BUILD:-3}
 
-if [ "$ARCH" = "i486" ]; then
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
 CWD=$(pwd)
diff --git a/source/xap/thunar-volman/slack-desc b/source/xap/thunar-volman/slack-desc
deleted file mode 100644
index a5fdf60b..00000000
--- a/source/xap/thunar-volman/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------|
-thunar-volman: thunar-volman (Thunar Volume Manager Plugin)
-thunar-volman: 
-thunar-volman: thunar-volman is an extension for the Thunar File Manager, 
-thunar-volman: which enables automatic management of removable drives and 
-thunar-volman: media. 
-thunar-volman: 
-thunar-volman: It was designed to look and act similar to gnome-volume-manager 
-thunar-volman: to get consistent removable drive and media management in both 
-thunar-volman: Xfce and GNOME. 
-thunar-volman: 
-thunar-volman: 
diff --git a/source/xap/thunar-volman/thunar-volman.SlackBuild b/source/xap/thunar-volman/thunar-volman.SlackBuild
deleted file mode 100755
index bf14ff9e..00000000
--- a/source/xap/thunar-volman/thunar-volman.SlackBuild
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for thunar-volman
-# http://goodies.xfce.org/releases/thunar-volman/
-
-# Copyright 2007-2009  Robby Workman, Northport, Alabama, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PRGNAM=thunar-volman
-VERSION=0.3.80
-ARCH=${ARCH:-x86_64}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PRGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
-cd $PRGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --enable-debug=no \
-  --build=$ARCH-slackware-linux
-
-make || exit 1
-make install DESTDIR=$PKG
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/xap/windowmaker/WindowMaker.noopensusemenu.diff b/source/xap/windowmaker/WindowMaker.noopensusemenu.diff
new file mode 100644
index 00000000..e68fa85a
--- /dev/null
+++ b/source/xap/windowmaker/WindowMaker.noopensusemenu.diff
@@ -0,0 +1,14 @@
+--- ./util/wmgenmenu.h.orig	2012-05-24 16:28:16.000000000 -0500
++++ ./util/wmgenmenu.h	2012-07-29 15:34:37.242208543 -0500
+@@ -458,7 +458,10 @@
+ char *OpenSUSE[MAX_NR_APPS][2] = {
+ 	{ N_("YaST 2"), "yast2" },
+ 	{ N_("YaST"), "yast !" },
+-	{ N_("System Settings"), "systemsettings" },
++        /* The KDE systemsettings is mistaken for an OpenSUSE tool, and adds */
++        /* and OpenSUSE menu that starts it.  I can't think of any reason    */
++        /* this would be useful under WindowMaker, so I'm commenting it out. */
++	/* { N_("System Settings"), "systemsettings" }, */
+ 	{ N_("UMTSMon"), "umtsmon" },
+ 	{ NULL, NULL }
+ };
diff --git a/source/xap/windowmaker/windowmaker.SlackBuild b/source/xap/windowmaker/windowmaker.SlackBuild
index 74462e28..da5ac679 100755
--- a/source/xap/windowmaker/windowmaker.SlackBuild
+++ b/source/xap/windowmaker/windowmaker.SlackBuild
@@ -21,8 +21,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-VERSION=20060427cvs
-BUILD=${BUILD:-4}
+VERSION=${VERSION:-0.95.3}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -59,15 +59,9 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf WindowMaker-$VERSION
-tar xvf $CWD/WindowMaker-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/WindowMaker-$VERSION.tar.xz || exit 1
 cd WindowMaker-$VERSION || exit 1
 
-zcat $CWD/windowmaker.no-mmx.diff.gz | patch -p1 --verbose -F 3 || exit 1
-
-zcat $CWD/windowmaker.png.1.4.0.diff.gz | patch -p1 --verbose || exit 1
-
-sh autogen.sh
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -76,7 +70,10 @@ find . \
   -exec chmod 644 {} \;
 
 # This should be non-interactive where possible.
-zcat $CWD/wmaker.inst.diff.gz | patch -p1 --verbose || exit
+zcat $CWD/wmaker.inst.diff.gz | patch -p1 --verbose || exit 1
+
+# Get rid of OpenSUSE menu:
+zcat $CWD/WindowMaker.noopensusemenu.diff.gz | patch -p1 --verbose || exit 1
 
 LINGUAS="$(cd po ; /bin/ls *.po | sed 's/.po//g')" \
 GNUSTEP_LOCAL_ROOT=/usr/lib${LIBDIRSUFFIX}/GNUstep \
@@ -87,10 +84,11 @@ NLSDIR=/usr/share/locale \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --mandir=/usr/man \
   --sysconfdir=/etc/X11 \
-  --enable-gnome \
-  --enable-kde \
+  --docdir=/usr/doc/WindowMaker-$VERSION \
   --enable-usermenu \
-  --with-appspath=/usr/lib${LIBDIRSUFFIX}/GNUstep/Applications \
+  --enable-xrandr \
+  --enable-xinerama \
+  --disable-static \
   --build=$ARCH-slackware-linux
 
 # NLS bugs like -i
@@ -100,10 +98,18 @@ make $NUMJOBS || make -i || exit 1
 sed -i -e "s#/usr/local/GNUstep/Applications/WPrefs.app/#/usr/lib${LIBDIRSUFFIX}/GNUstep/Applications/WPrefs.app/#" \
   $(grep -lr '/usr/local/GNUstep/Applications/WPrefs.app/' *)
 
+# Fix hard coded paths in util/wmgenmenu.c for
+#  "Configure Window Maker" root menu entry
+#  Appearance/{Themes, Styles, Icons} entries.
+
+sed -i -e "s#WMCreatePLString(\"WPrefs\")#WMCreatePLString(\"/usr/lib${LIBDIRSUFFIX}/GNUstep/Applications/WPrefs.app/WPrefs\")#" \
+       -e "s#/usr/local/share#/usr/share/#" util/wmgenmenu.c
+
+
 make -i install DESTDIR=$PKG 
 mkdir -p $PKG/usr/doc/WindowMaker-$VERSION
 cp -a \
-  AUTHORS BUGFORM BUGS COPYING COPYING.WTFPL FAQ FAQ.I18N FAQ.I18N.cs FAQ.I18N.sk INSTALL INSTALL.cs INSTALL.es INSTALL.fr INSTALL.pt INSTALL.sk MIRRORS NEWS README README.definable-cursor README.pt TODO \
+  AUTHORS BUGFORM BUGS COPYING* FAQ* INSTALL* MIRRORS NEWS README* TODO \ 
    $PKG/usr/doc/WindowMaker-$VERSION
 
 # If there's a ChangeLog, installing at least part of the recent history
@@ -116,7 +122,7 @@ fi
 
 cd $TMP
 rm -rf WindowMaker-extra-0.1
-tar xvf $CWD/WindowMaker-extra-0.1.tar.gz || exit 1
+tar xvf $CWD/WindowMaker-extra-0.1.tar.xz || exit 1
 cd WindowMaker-extra-0.1 || exit 1
 CFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -135,7 +141,20 @@ mkdir -p $PKG/etc/X11/xinit
 zcat $CWD/xinitrc.wmaker.gz > $PKG/etc/X11/xinit/xinitrc.wmaker
 chmod 0755 $PKG/etc/X11/xinit/xinitrc.wmaker
 
-gzip -9 $PKG/usr/man/man1/* $PKG/usr/man/sk/man1/*
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/source/xap/windowmaker/windowmaker.no-mmx.diff b/source/xap/windowmaker/windowmaker.no-mmx.diff
deleted file mode 100644
index 277cc79e..00000000
--- a/source/xap/windowmaker/windowmaker.no-mmx.diff
+++ /dev/null
@@ -1,19 +0,0 @@
---- ./configure.ac.01	2008-06-02 08:42:30.000000000 +0200
-+++ ./configure.ac	2008-06-02 08:46:49.000000000 +0200
-@@ -190,7 +190,15 @@
- # until we fix it, leave it disabled
- asm_support=no
- mmx_support=no
--if test "$ac_cv_prog_gcc" = yes; then
-+
-+check_for_mmx_support=yes
-+AC_ARG_ENABLE(mmx,
-+  [  --disable-mmx          disable compilation of MMX inline assembly ],
-+  [if test x$enableval != xyes; then
-+    check_for_mmx_support=no
-+  fi])
-+
-+if test "$ac_cv_prog_gcc" = yes -a "$check_for_mmx_support" = yes; then
- case $host_cpu in
- *i?86*)
-     # gcc-3.3 or newer complains about some of our stuff without this
diff --git a/source/xap/windowmaker/windowmaker.png.1.4.0.diff b/source/xap/windowmaker/windowmaker.png.1.4.0.diff
deleted file mode 100644
index a6359c4b..00000000
--- a/source/xap/windowmaker/windowmaker.png.1.4.0.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./wrlib/load.c.orig	2008-04-30 15:45:26.000000000 -0500
-+++ ./wrlib/load.c	2010-02-11 15:39:38.000000000 -0600
-@@ -348,7 +348,7 @@
- 
- #ifdef USE_PNG
-     /* check for PNG */
--    if (png_check_sig(buffer, 8))
-+    if (!png_sig_cmp(buffer, 0, 8))
-         return IM_PNG;
- #endif
- 
diff --git a/source/xap/windowmaker/wmaker.inst.diff b/source/xap/windowmaker/wmaker.inst.diff
index c80edd34..3fdfe643 100644
--- a/source/xap/windowmaker/wmaker.inst.diff
+++ b/source/xap/windowmaker/wmaker.inst.diff
@@ -1,10 +1,12 @@
---- ./util/wmaker.inst.in.orig	2002-05-30 13:13:46.000000000 -0700
-+++ ./util/wmaker.inst.in	2002-05-30 13:16:37.000000000 -0700
-@@ -37,19 +37,7 @@
- make_script() {
- 	ISCRIPT=$1
+diff -Nur WindowMaker-0.95.2.orig/util/wmaker.inst.in WindowMaker-0.95.2/util/wmaker.inst.in
+--- WindowMaker-0.95.2.orig/util/wmaker.inst.in	2012-02-14 13:36:01.000000000 -0600
++++ WindowMaker-0.95.2/util/wmaker.inst.in	2012-02-14 18:25:28.213206250 -0600
+@@ -33,20 +33,7 @@
  
--	cat << EOF >> $ISCRIPT
+ make_script() {
+ 	ISCRIPT="$1"
+-
+-	cat << EOF >> "$ISCRIPT"
 -# Window Maker default X session startup script 
 -
 -PATH="\$PATH:$BINDIR"
@@ -12,16 +14,16 @@
 -# If you login from xdm, uncomment this to make error messages appear
 -# in the console window.
 -#
--# tail -f $HOME/.xsession-errors > /dev/console &
+-# tail -f "$HOME"/.xsession-errors > /dev/console &
 -
 -exec wmaker
 -
 -EOF
-+        cat /etc/X11/xinit/xinitrc.wmaker >> $ISCRIPT
- 	chmod +rx $ISCRIPT
++	cat /etc/X11/xinit/xinitrc.wmaker >> $ISCRIPT
+ 	chmod +rx "$ISCRIPT"
  }
  
-@@ -329,20 +317,7 @@
+@@ -298,19 +285,7 @@
  
  trap "show_end_message;exit" 2
  
@@ -38,8 +40,7 @@
 -	echo "Using .xinitrc as a default value"
 -	file=.xinitrc
 -fi
--
 +file=.xinitrc
- if [ -f $USERDIR/$file ]; then
- 	mv $USERDIR/$file $USERDIR/$file.old.$DATE
- fi
+ 
+ if [ -f "$USERDIR/$file" ]; then
+ 	mv "$USERDIR/$file" "$USERDIR/$file.old.$DATE"
diff --git a/source/xap/windowmaker/xinitrc.wmaker b/source/xap/windowmaker/xinitrc.wmaker
index 2c43c1eb..386588a4 100644
--- a/source/xap/windowmaker/xinitrc.wmaker
+++ b/source/xap/windowmaker/xinitrc.wmaker
@@ -36,7 +36,7 @@ fi
 
 # Start the window manager:
 if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
-  exec ck-launch-session /usr/bin/wmaker $NOCPP
+  exec ck-launch-session dbus-launch --exit-with-session /usr/bin/wmaker $NOCPP
 else
-  exec /usr/bin/wmaker $NOCPP
+  exec dbus-launch --exit-with-session /usr/bin/wmaker $NOCPP
 fi
diff --git a/source/xap/x11-ssh-askpass/slack-desc b/source/xap/x11-ssh-askpass/slack-desc
index d467253f..49faabba 100644
--- a/source/xap/x11-ssh-askpass/slack-desc
+++ b/source/xap/x11-ssh-askpass/slack-desc
@@ -5,11 +5,11 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-               |-----handy-ruler---------------------------------------------|
+               |-----handy-ruler------------------------------------------------------|
 x11-ssh-askpass: x11-ssh-askpass (an X11-based passphrase dialog)
 x11-ssh-askpass:
-x11-ssh-askpass: x11-ssh-askpass is an X11-based passphrase dialog for use
-x11-ssh-askpass: with OpenSSH.
+x11-ssh-askpass: x11-ssh-askpass is an X11-based passphrase dialog for use with
+x11-ssh-askpass: OpenSSH.
 x11-ssh-askpass:
 x11-ssh-askpass:
 x11-ssh-askpass:
diff --git a/source/xap/x3270/x3270.SlackBuild b/source/xap/x3270/x3270.SlackBuild
index 225142a2..fd2f53fa 100755
--- a/source/xap/x3270/x3270.SlackBuild
+++ b/source/xap/x3270/x3270.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,10 +20,48 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TARBVER=3.3.7p8
-VERSION=3.3.7p8
-ARCH=${ARCH:-x86_64}
-BUILD=${BUILD:-1}
+PKGNAM=x3270
+VERSION=3.3
+TARBVER=${TARBVER:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=$(echo $TARBVER | cut -f 1,2 -d .)
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -35,7 +73,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf x3270-$VERSION
-tar xvf $CWD/x3270-$TARBVER.tar.bz2 || exit 1
+tar xvf $CWD/x3270-$TARBVER.tar.?z* || exit 1
 cd x3270-3.3 || exit 1
 chown -R root:root .
 find . \
@@ -44,6 +82,8 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --sysconfdir=/etc/X11 \
@@ -54,13 +94,13 @@ make install DESTDIR=$PKG
 
 mv $PKG/etc/X11/x3270/ibm_hosts $PKG/etc/X11/x3270/ibm_hosts.new
 find $PKG -name fonts.dir -exec rm {} \;
-if [ -d $PKG/usr/lib/X11/fonts/misc ]; then
+if [ -d $PKG/usr/lib$LIBDIRSUFFIX/X11/fonts/misc ]; then
   mkdir -p $PKG/usr/share/fonts
-  mv $PKG/usr/lib/X11/fonts/misc $PKG/usr/share/fonts
-  rmdir $PKG/usr/lib/X11/fonts/misc 2> /dev/null
-  rmdir $PKG/usr/lib/X11/fonts 2> /dev/null
-  rmdir $PKG/usr/lib/X11 2> /dev/null
-  rmdir $PKG/usr/lib 2> /dev/null
+  mv $PKG/usr/lib$LIBDIRSUFFIX/X11/fonts/misc $PKG/usr/share/fonts
+  rmdir $PKG/usr/lib$LIBDIRSUFFIX/X11/fonts/misc 2> /dev/null
+  rmdir $PKG/usr/lib$LIBDIRSUFFIX/X11/fonts 2> /dev/null
+  rmdir $PKG/usr/lib$LIBDIRSUFFIX/X11 2> /dev/null
+  rmdir $PKG/usr/lib$LIBDIRSUFFIX 2> /dev/null
 fi
 
 mkdir -p $PKG/etc/X11/app-defaults
@@ -75,15 +115,15 @@ for file in x3270-script.man x3270.man x3270if.man ; do
 done
 cat ibm_hosts.man | gzip -9c > $PKG/usr/man/man5/ibm_hosts.5.gz
 
-mkdir -p $PKG/usr/doc/x3270-$VERSION
+mkdir -p $PKG/usr/doc/x3270-$TARBVER
 cp -a \
   LICENSE README* Examples html \
-  $PKG/usr/doc/x3270-$VERSION
+  $PKG/usr/doc/x3270-$TARBVER
 
 mkdir -p $PKG/install
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
-/sbin/makepkg -l y -c n $TMP/x3270-$VERSION-$ARCH-$BUILD.txz
+/sbin/makepkg -l y -c n $TMP/x3270-$TARBVER-$ARCH-$BUILD.txz
 
diff --git a/source/xap/xchat/xchat.SlackBuild b/source/xap/xchat/xchat.SlackBuild
index cc7b5e1a..c02a71e5 100755
--- a/source/xap/xchat/xchat.SlackBuild
+++ b/source/xap/xchat/xchat.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=2.8.8
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/xfce/patches/Thunar.thunar-vfs-io-local.diff b/source/xap/xfce/patches/Thunar.thunar-vfs-io-local.diff
deleted file mode 100644
index 7d92c3e4..00000000
--- a/source/xap/xfce/patches/Thunar.thunar-vfs-io-local.diff
+++ /dev/null
@@ -1,20 +0,0 @@
---- thunar-vfs/thunar-vfs-io-local.c.old        2008-06-13 12:43:52.000000000 +0200
-+++ thunar-vfs/thunar-vfs-io-local.c    2008-06-13 14:41:46.000000000 +0200
-@@ -301,7 +301,7 @@
-     }
-
-   /* check whether we have a hidden file here */
--  if ((s - (const guchar *) name) > 1 && (*name == '.' || *(s - 1) == '~'))
-+  if ((s - (const guchar *) name) > 1 && (*name == '.' ))
-     info->flags = THUNAR_VFS_FILE_FLAGS_HIDDEN;
-   else
-     info->flags = THUNAR_VFS_FILE_FLAGS_NONE;
-@@ -1029,7 +1029,7 @@
-       info->display_name = g_strdup (name);
-
-       /* check if this is a hidden file now */
--      if (strlen (name) > 1 && (name[0] == '.' || name[strlen (name) - 1] == '~'))
-+      if (strlen (name) > 1 && (name[0] == '.'))
-         info->flags |= THUNAR_VFS_FILE_FLAGS_HIDDEN;
-       else
-         info->flags &= ~THUNAR_VFS_FILE_FLAGS_HIDDEN;
diff --git a/source/xap/xfce/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff b/source/xap/xfce/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff
deleted file mode 100644
index be64a2da..00000000
--- a/source/xap/xfce/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff
+++ /dev/null
@@ -1,24 +0,0 @@
-From b55be8ded0c7e1119eb062a5831b246b618c89e8 Mon Sep 17 00:00:00 2001
-From: Mike Massonnet <mmassonnet@gmail.com>
-Date: Thu, 8 Apr 2010 22:38:50 +0200
-Subject: [PATCH] use right comment character (! and not #) in Xft.xrdb file (bug 6314)
-
- scripts/Xft.xrdb |    8 ++++----
- 1 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/scripts/Xft.xrdb b/scripts/Xft.xrdb
-index af45361..cd26513 100644
---- a/scripts/Xft.xrdb
-+++ b/scripts/Xft.xrdb
-@@ -1,7 +1,7 @@
--# Those are fallback settings, use the ui plugin to change it
--# or add your overrides to ~/.Xresources
--# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
--# Xft hinting: 1/0
-+! Those are fallback settings, use the ui plugin to change it
-+! or add your overrides to ~/.Xresources
-+! Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
-+! Xft hinting: 1/0
- 
- Xft.hinting: 1
- Xft.hintstyle: hintmedium
diff --git a/source/xap/xfce/patches/mousepad-fix_find.diff b/source/xap/xfce/patches/mousepad-fix_find.diff
deleted file mode 100644
index 6477cd78..00000000
--- a/source/xap/xfce/patches/mousepad-fix_find.diff
+++ /dev/null
@@ -1,43 +0,0 @@
-commit a6383ccf4e3ba425ffb6489a795785e6a626c048
-Author: Nick Schermer <nick@xfce.org>
-Date:   Tue Jul 6 17:53:54 2010 +0200
-
-    Also fix find (bug #6544).
-
-diff --git a/src/search.c b/src/search.c
-index 4fb1c5b..91f69cf 100644
---- a/src/search.c
-+++ b/src/search.c
-@@ -78,7 +78,7 @@ gboolean document_search_real(StructData *sd, gint direction)
- static gint document_replace_real(StructData *sd)
- {
- 	GtkTextIter iter, match_start, match_end;
--	GtkTextMark *mark_init = NULL;
-+	GtkTextMark *mark_init = NULL, *mark_start, *mark_end;
- 	gboolean res;
- 	gint num = 0;
- 	GtkWidget *q_dialog = NULL;
-@@ -113,6 +113,11 @@ static gint document_replace_real(StructData *sd)
- 				if (num == 0 && q_dialog == NULL)
- 					q_dialog = create_dialog_message_question(
- 						gtk_widget_get_toplevel(sd->mainwin->textview), _("Replace?"));
-+
-+				gtk_text_buffer_get_selection_bounds(textbuffer, &match_start, &match_end);
-+				mark_start = gtk_text_buffer_create_mark(textbuffer, NULL, &match_start, FALSE);
-+				mark_end = gtk_text_buffer_create_mark(textbuffer, NULL, &match_end, FALSE);
-+
- 				switch (gtk_dialog_run(GTK_DIALOG(q_dialog))) {
- 				case GTK_RESPONSE_CANCEL:
- 					res = 0;
-@@ -122,6 +127,11 @@ static gint document_replace_real(StructData *sd)
- 				case GTK_RESPONSE_NO:
- 					continue;
- 				}
-+
-+				gtk_text_buffer_get_iter_at_mark(textbuffer, &match_start, mark_start);
-+				gtk_text_buffer_get_iter_at_mark(textbuffer, &match_end, mark_end);
-+				gtk_text_buffer_move_mark_by_name(textbuffer, "selection_bound", &match_start);
-+				gtk_text_buffer_move_mark_by_name(textbuffer, "insert", &match_end);
- 			}
- 			gtk_text_buffer_delete_selection(textbuffer, TRUE, TRUE);
- 			undo_set_sequency(TRUE);
diff --git a/source/xap/xfce/patches/mousepad-fix_find_and_replace.diff b/source/xap/xfce/patches/mousepad-fix_find_and_replace.diff
deleted file mode 100644
index 5db73b1e..00000000
--- a/source/xap/xfce/patches/mousepad-fix_find_and_replace.diff
+++ /dev/null
@@ -1,36 +0,0 @@
-commit 80819d447df5661ee6c9e9cd22f501cee612da8b
-Author: Lionel Le Folgoc <mrpouit@gmail.com>
-Date:   Mon Jul 5 19:57:53 2010 +0200
-
-    Fix find and replace (bug #5831).
-
-diff --git a/src/search.c b/src/search.c
-index 07e29c7..4fb1c5b 100644
---- a/src/search.c
-+++ b/src/search.c
-@@ -210,8 +210,11 @@ gint run_dialog_find(StructData *sd)
- 		G_CALLBACK(toggle_sensitivity), NULL);
- 	 g_signal_connect(G_OBJECT(entry_find), "delete-text",
- 		G_CALLBACK(toggle_sensitivity), NULL);
--	 if (sd->search.string_find) 
-+	 if (sd->search.string_find) {
- 		 gtk_entry_set_text(GTK_ENTRY(entry_find), sd->search.string_find);
-+		 gtk_dialog_set_response_sensitive(GTK_DIALOG(dialog),
-+			GTK_RESPONSE_OK, TRUE);
-+	 }
- 
- 	gtk_dialog_set_default_response(GTK_DIALOG(dialog), GTK_RESPONSE_OK);
- 	gtk_entry_set_activates_default(GTK_ENTRY(entry_find), TRUE);
-@@ -275,8 +278,11 @@ gint run_dialog_replace(StructData *sd)
- 		G_CALLBACK(toggle_sensitivity), NULL);
- 	 g_signal_connect(G_OBJECT(entry_find), "delete-text",
- 		G_CALLBACK(toggle_sensitivity), NULL);
--	 if (sd->search.string_find) 
-+	 if (sd->search.string_find) {
- 		 gtk_entry_set_text(GTK_ENTRY(entry_find), sd->search.string_find);
-+		 gtk_dialog_set_response_sensitive(GTK_DIALOG(dialog),
-+			GTK_RESPONSE_OK, TRUE);
-+	}
- 	label_replace = gtk_label_new_with_mnemonic(_("Re_place with: "));
- 	 gtk_misc_set_alignment(GTK_MISC(label_replace), 0, 0.5);
- 	 gtk_table_attach_defaults(GTK_TABLE(table), label_replace, 0, 1, 1, 2);
diff --git a/source/xap/xfce/patches/no_sensitive_panel_during_plugin_moves.patch b/source/xap/xfce/patches/no_sensitive_panel_during_plugin_moves.patch
deleted file mode 100644
index 6e5b4a9a..00000000
--- a/source/xap/xfce/patches/no_sensitive_panel_during_plugin_moves.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8ae5177d843802b49e90ecf801d8a4fac00b866a Mon Sep 17 00:00:00 2001
-From: Robby Workman <rworkman@slackware.com>
-Date: Tue, 22 Feb 2011 21:48:56 -0600
-Subject: [PATCH] panel/panel.c: Don't make panel insensitive during plugin moves
-
-This fixes http://bugzilla.xfce.org/show_bug.cgi?id=6818 while
-working around https://bugzilla.gnome.org/show_bug.cgi?id=634765
----
- panel/panel.c |    1 -
- 1 files changed, 0 insertions(+), 1 deletions(-)
-
-diff --git a/panel/panel.c b/panel/panel.c
-index fa0709b..e7a9eac 100644
---- a/panel/panel.c
-+++ b/panel/panel.c
-@@ -811,7 +811,6 @@ _item_start_move (GtkWidget *item,
- 
-         if (!priv->edit_mode)
-         {
--            panel_set_items_sensitive (p, FALSE);
-             xfce_itembar_raise_event_window (XFCE_ITEMBAR (priv->itembar));
-             panel_block_autohide (p);
-         }
--- 
-1.7.4.1
-
diff --git a/source/xap/xfce/patches/thunar-1.0.2-fixup_docdir.diff b/source/xap/xfce/patches/thunar-1.0.2-fixup_docdir.diff
deleted file mode 100644
index 7315ecea..00000000
--- a/source/xap/xfce/patches/thunar-1.0.2-fixup_docdir.diff
+++ /dev/null
@@ -1,384 +0,0 @@
-diff -Nur Thunar-1.0.2.orig//Makefile.in Thunar-1.0.2/Makefile.in
---- Thunar-1.0.2.orig//Makefile.in	2010-05-21 12:11:02.000000000 -0500
-+++ Thunar-1.0.2/Makefile.in	2010-05-23 17:44:59.068552125 -0500
-@@ -1040,7 +1040,7 @@
- 
- ThunarHelp: ThunarHelp.in Makefile
- 	rm -f ThunarHelp.gen ThunarHelp
--	sed -e "s,\@datadir\@,$(datadir),g" 				\
-+	sed -e "s,\@htmldir\@,$(htmldir),g" 				\
- 		< $(srcdir)/ThunarHelp.in				\
- 		> ThunarHelp.gen
- 	mv ThunarHelp.gen ThunarHelp
-diff -Nur Thunar-1.0.2.orig//ThunarHelp.in Thunar-1.0.2/ThunarHelp.in
---- Thunar-1.0.2.orig//ThunarHelp.in	2010-05-21 12:10:52.000000000 -0500
-+++ Thunar-1.0.2/ThunarHelp.in	2010-05-23 17:45:26.207677481 -0500
-@@ -19,7 +19,7 @@
- # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- #
- 
--HELPDIR="@datadir@/doc/Thunar/html/"
-+HELPDIR="@htmldir@/"
- 
- if test -n "$LC_ALL"; then
-   LC=$LC_ALL
-diff -Nur Thunar-1.0.2.orig//docs/Makefile.in Thunar-1.0.2/docs/Makefile.in
---- Thunar-1.0.2.orig//docs/Makefile.in	2010-05-21 12:10:57.000000000 -0500
-+++ Thunar-1.0.2/docs/Makefile.in	2010-05-23 17:46:08.776567272 -0500
-@@ -322,7 +322,7 @@
- builddir = @builddir@
- datadir = @datadir@
- datarootdir = @datarootdir@
--docdir = $(datadir)/doc/Thunar
-+docdir = @docdir@
- dvidir = @dvidir@
- exec_prefix = @exec_prefix@
- host = @host@
-diff -Nur Thunar-1.0.2.orig//docs/manual/C/Makefile.in Thunar-1.0.2/docs/manual/C/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/C/Makefile.in	2010-05-21 12:10:57.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/C/Makefile.in	2010-05-23 17:46:52.539542089 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/C
-+TARGET_DIR = $(htmldir)/C
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/C/images/Makefile.in Thunar-1.0.2/docs/manual/C/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/C/images/Makefile.in	2010-05-21 12:10:57.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/C/images/Makefile.in	2010-05-23 17:47:25.359542363 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/C/images
-+imagesdir = $(htmldir)/C/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/Makefile.in Thunar-1.0.2/docs/manual/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/Makefile.in	2010-05-21 12:10:57.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/Makefile.in	2010-05-23 17:48:04.650570173 -0500
-@@ -370,7 +370,7 @@
- 	tr								\
- 	zh_TW
- 
--cssdir = $(datadir)/doc/Thunar/html
-+cssdir = $(htmldir)
- css_DATA = \
- 	thunar.css
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/am/Makefile.in Thunar-1.0.2/docs/manual/am/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/am/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/am/Makefile.in	2010-05-23 17:48:35.304542671 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/am
-+TARGET_DIR = $(htmldir)/am
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/am/images/Makefile.in Thunar-1.0.2/docs/manual/am/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/am/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/am/images/Makefile.in	2010-05-23 17:51:21.111542305 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/am/images
-+imagesdir = $(htmldir)/am/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/da/Makefile.in Thunar-1.0.2/docs/manual/da/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/da/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/da/Makefile.in	2010-05-23 17:48:52.108550193 -0500
-@@ -334,7 +334,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/da
-+TARGET_DIR = $(htmldir)/da
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/da/images/Makefile.in Thunar-1.0.2/docs/manual/da/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/da/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/da/images/Makefile.in	2010-05-23 17:51:27.753542103 -0500
-@@ -314,7 +314,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/da/images
-+imagesdir = $(htmldir)/da/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png					\
-diff -Nur Thunar-1.0.2.orig//docs/manual/es/Makefile.in Thunar-1.0.2/docs/manual/es/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/es/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/es/Makefile.in	2010-05-23 17:48:58.300552519 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/es
-+TARGET_DIR = $(htmldir)/es
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/es/images/Makefile.in Thunar-1.0.2/docs/manual/es/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/es/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/es/images/Makefile.in	2010-05-23 17:51:34.373542961 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/es/images
-+imagesdir = $(htmldir)/es/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/eu/Makefile.in Thunar-1.0.2/docs/manual/eu/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/eu/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/eu/Makefile.in	2010-05-23 17:49:05.977677434 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/eu
-+TARGET_DIR = $(htmldir)/eu
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/eu/images/Makefile.in Thunar-1.0.2/docs/manual/eu/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/eu/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/eu/images/Makefile.in	2010-05-23 17:51:42.643542360 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/eu/images
-+imagesdir = $(htmldir)/eu/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/fr/Makefile.in Thunar-1.0.2/docs/manual/fr/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/fr/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/fr/Makefile.in	2010-05-23 17:49:12.495542046 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/fr
-+TARGET_DIR = $(htmldir)/fr
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/fr/images/Makefile.in Thunar-1.0.2/docs/manual/fr/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/fr/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/fr/images/Makefile.in	2010-05-23 17:51:51.116702819 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/fr/images
-+imagesdir = $(htmldir)/fr/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/gl/Makefile.in Thunar-1.0.2/docs/manual/gl/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/gl/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/gl/Makefile.in	2010-05-23 17:49:19.882542284 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/gl
-+TARGET_DIR = $(htmldir)/gl
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/gl/images/Makefile.in Thunar-1.0.2/docs/manual/gl/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/gl/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/gl/images/Makefile.in	2010-05-23 17:51:57.596588720 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/gl/images
-+imagesdir = $(htmldir)/gl/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/it/Makefile.in Thunar-1.0.2/docs/manual/it/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/it/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/it/Makefile.in	2010-05-23 17:49:27.597676807 -0500
-@@ -334,7 +334,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/it
-+TARGET_DIR = $(htmldir)/it
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/it/images/Makefile.in Thunar-1.0.2/docs/manual/it/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/it/images/Makefile.in	2010-05-21 12:10:58.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/it/images/Makefile.in	2010-05-23 17:52:05.152568701 -0500
-@@ -314,7 +314,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/it/images
-+imagesdir = $(htmldir)/it/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/ja/Makefile.in Thunar-1.0.2/docs/manual/ja/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/ja/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/ja/Makefile.in	2010-05-23 17:49:35.728552141 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/ja
-+TARGET_DIR = $(htmldir)/ja
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/ja/images/Makefile.in Thunar-1.0.2/docs/manual/ja/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/ja/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/ja/images/Makefile.in	2010-05-23 17:52:13.534542157 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/ja/images
-+imagesdir = $(htmldir)/ja/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/nl/Makefile.in Thunar-1.0.2/docs/manual/nl/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/nl/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/nl/Makefile.in	2010-05-23 17:49:42.981677782 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/nl
-+TARGET_DIR = $(htmldir)/nl
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/nl/images/Makefile.in Thunar-1.0.2/docs/manual/nl/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/nl/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/nl/images/Makefile.in	2010-05-23 17:52:19.353553300 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/nl/images
-+imagesdir = $(htmldir)/nl/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/pl/Makefile.in Thunar-1.0.2/docs/manual/pl/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/pl/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/pl/Makefile.in	2010-05-23 17:49:51.863542378 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/pl
-+TARGET_DIR = $(htmldir)/pl
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/pl/images/Makefile.in Thunar-1.0.2/docs/manual/pl/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/pl/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/pl/images/Makefile.in	2010-05-23 17:52:27.285677594 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/pl/images
-+imagesdir = $(htmldir)/pl/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/ru/Makefile.in Thunar-1.0.2/docs/manual/ru/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/ru/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/ru/Makefile.in	2010-05-23 17:49:59.951552903 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/ru
-+TARGET_DIR = $(htmldir)/ru
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/ru/images/Makefile.in Thunar-1.0.2/docs/manual/ru/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/ru/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/ru/images/Makefile.in	2010-05-23 17:52:33.673677284 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/ru/images
-+imagesdir = $(htmldir)/ru/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/tr/Makefile.in Thunar-1.0.2/docs/manual/tr/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/tr/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/tr/Makefile.in	2010-05-23 17:50:08.415553080 -0500
-@@ -334,7 +334,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/tr
-+TARGET_DIR = $(htmldir)/tr
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/tr/images/Makefile.in Thunar-1.0.2/docs/manual/tr/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/tr/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/tr/images/Makefile.in	2010-05-23 17:52:40.320542409 -0500
-@@ -314,7 +314,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/tr/images
-+imagesdir = $(htmldir)/tr/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
-diff -Nur Thunar-1.0.2.orig//docs/manual/zh_TW/Makefile.in Thunar-1.0.2/docs/manual/zh_TW/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/zh_TW/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/zh_TW/Makefile.in	2010-05-23 17:50:20.989569041 -0500
-@@ -336,7 +336,7 @@
- SUBDIRS = \
- 	images
- 
--TARGET_DIR = $(datadir)/doc/Thunar/html/zh_TW
-+TARGET_DIR = $(htmldir)/zh_TW
- STYLESHEET = ../thunar.xsl
- DOCUMENT = Thunar.xml
- 
-diff -Nur Thunar-1.0.2.orig//docs/manual/zh_TW/images/Makefile.in Thunar-1.0.2/docs/manual/zh_TW/images/Makefile.in
---- Thunar-1.0.2.orig//docs/manual/zh_TW/images/Makefile.in	2010-05-21 12:10:59.000000000 -0500
-+++ Thunar-1.0.2/docs/manual/zh_TW/images/Makefile.in	2010-05-23 17:52:47.172552372 -0500
-@@ -316,7 +316,7 @@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- xfconf_query_found = @xfconf_query_found@
--imagesdir = $(datadir)/doc/Thunar/html/zh_TW/images
-+imagesdir = $(htmldir)/zh_TW/images
- images_DATA = \
- 	bulk-rename.png							\
- 	file-manager-window.png						\
diff --git a/source/xap/xfce/patches/xfcalendar.desktop.in.diff b/source/xap/xfce/patches/xfcalendar.desktop.in.diff
deleted file mode 100644
index d8826781..00000000
--- a/source/xap/xfce/patches/xfcalendar.desktop.in.diff
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/xfcalendar.desktop.in	2009-03-01 10:13:10.349305702 -0600
-+++ b/xfcalendar.desktop.in	2009-03-01 10:13:29.564307721 -0600
-@@ -10,4 +10,5 @@
- Terminal=false
- Type=Application
- Categories=X-XFCE;Office;Calendar;GTK;
-+OnlyShowIn=XFCE;
- _GenericName=Calendar
-
diff --git a/source/xap/xfce/patches/xfce-utils-load_systemwide_Xmodmap.diff b/source/xap/xfce/patches/xfce-utils-load_systemwide_Xmodmap.diff
deleted file mode 100644
index fde47a9e..00000000
--- a/source/xap/xfce/patches/xfce-utils-load_systemwide_Xmodmap.diff
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Nur xfce-utils-4.6.2.orig//scripts/xinitrc.in.in xfce-utils-4.6.2/scripts/xinitrc.in.in
---- xfce-utils-4.6.2.orig//scripts/xinitrc.in.in	2010-05-21 11:56:26.000000000 -0500
-+++ xfce-utils-4.6.2/scripts/xinitrc.in.in	2011-03-09 22:56:18.687297854 -0600
-@@ -97,6 +97,7 @@
- cat /dev/null $XRESOURCES | xrdb -nocpp -merge -
- 
- # load local modmap
-+test -r /etc/X11/xinit/.Xmodmap && xmodmap /etc/X11/xinit/.Xmodmap
- test -r $HOME/.Xmodmap && xmodmap $HOME/.Xmodmap
- 
- # Launch xscreensaver (if available), but only as non-root user
diff --git a/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff b/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff
deleted file mode 100644
index 206f6607..00000000
--- a/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff
+++ /dev/null
@@ -1,15 +0,0 @@
---- ./scripts/xinitrc.in.in.orig	2009-04-09 18:21:13.000000000 -0500
-+++ ./scripts/xinitrc.in.in	2010-06-18 11:33:37.000000000 -0500
-@@ -131,7 +131,11 @@
- 	x|xno*)
- 		;;
- 	*)
--		$xfcesm
-+                if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
-+                        ck-launch-session $xfcesm
-+                else
-+                        $xfcesm
-+                fi
- 
- 		if test $kill_sshagent -eq 1; then
- 			eval `$sshagent -k`
diff --git a/source/xap/xfce/patches/xfdesktop-fix_education_icon.diff b/source/xap/xfce/patches/xfdesktop-fix_education_icon.diff
deleted file mode 100644
index 56a34060..00000000
--- a/source/xap/xfce/patches/xfdesktop-fix_education_icon.diff
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Nur xfdesktop-4.6.1.orig/modules/menu/directory-data/xfce-education.directory.in xfdesktop-4.6.1/modules/menu/directory-data/xfce-education.directory.in
---- xfdesktop-4.6.1.orig/modules/menu/directory-data/xfce-education.directory.in	2009-01-12 16:03:19.000000000 -0600
-+++ xfdesktop-4.6.1/modules/menu/directory-data/xfce-education.directory.in	2009-07-31 01:04:29.029467762 -0500
-@@ -2,6 +2,6 @@
- Version=1.0
- Encoding=UTF-8
- Type=Directory
--Icon=
-+Icon=applications-education
- _Name=Education
- _Comment=Educational software
diff --git a/source/xap/xfce/patches/xfsm-compat-kde.c-start-kde4-services.diff b/source/xap/xfce/patches/xfsm-compat-kde.c-start-kde4-services.diff
deleted file mode 100644
index 9c54cf9a..00000000
--- a/source/xap/xfce/patches/xfsm-compat-kde.c-start-kde4-services.diff
+++ /dev/null
@@ -1,49 +0,0 @@
-From 51ee1e872e8671bf439e5d391b86432904cbc5ef Mon Sep 17 00:00:00 2001
-From: Robby Workman <rworkman@slackware.com>
-Date: Sun, 6 Mar 2011 23:55:35 -0600
-Subject: [PATCH] xfsm-compat-kde.c: Start KDE4 services instead of KDE3
-
----
- xfce4-session/xfsm-compat-kde.c |   10 ++++------
- 1 files changed, 4 insertions(+), 6 deletions(-)
-
-diff --git a/xfce4-session/xfsm-compat-kde.c b/xfce4-session/xfsm-compat-kde.c
-index ced6ece..b51387e 100644
---- a/xfce4-session/xfsm-compat-kde.c
-+++ b/xfce4-session/xfsm-compat-kde.c
-@@ -123,10 +123,10 @@ xfsm_compat_kde_startup (XfsmSplashScreen *splash)
-   if (G_LIKELY (splash != NULL))
-     xfsm_splash_screen_next (splash, _("Starting KDE services"));
- 
--  run ("kdeinit");
-+  run ("kdeinit4");
- 
-   /* tell klauncher about the session manager */
--  g_snprintf (command, 256, "dcop klauncher klauncher setLaunchEnv "
-+  g_snprintf (command, 256, "qdbus org.kde.klauncher /KLauncher setLaunchEnv "
-                             "SESSION_MANAGER \"%s\"",
-                             g_getenv ("SESSION_MANAGER"));
-   run (command);
-@@ -134,7 +134,7 @@ xfsm_compat_kde_startup (XfsmSplashScreen *splash)
-   /* tell kde if we are running multi-head */
-   if (gdk_display_get_n_screens (gdk_display_get_default ()) > 1)
-     {
--      g_snprintf (command, 256, "dcop klauncher klauncher setLaunchEnv "
-+      g_snprintf (command, 256, "qdbus org.kde.klauncher /KLauncher setLaunchEnv "
-                                 "KDE_MULTIHEAD \"true\"");
-       run (command);
-     }
-@@ -150,9 +150,7 @@ xfsm_compat_kde_shutdown (void)
-     return;
- 
-   /* shutdown KDE services */
--  run ("kdeinit_shutdown");
--  run ("dcopserver_shutdown");
--  run ("artsshell -q terminate");
-+  run ("kdeinit4_shutdown");
- 
-   kde_compat_started = FALSE;
- }
--- 
-1.7.4.1
-
diff --git a/source/xap/xfce/profile.d/xfce.csh b/source/xap/xfce/profile.d/xfce.csh
deleted file mode 100755
index ccc2b8f1..00000000
--- a/source/xap/xfce/profile.d/xfce.csh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/csh
-if ( $?XDG_CONFIG_DIRS ) then
-    setenv XDG_CONFIG_DIRS ${XDG_CONFIG_DIRS}:/etc/xfce/xdg
-else
-    setenv XDG_CONFIG_DIRS /etc/xdg:/etc/xfce/xdg
-endif
diff --git a/source/xap/xfce/profile.d/xfce.sh b/source/xap/xfce/profile.d/xfce.sh
deleted file mode 100755
index adb187c1..00000000
--- a/source/xap/xfce/profile.d/xfce.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-if [ ! "$XDG_CONFIG_DIRS" = "" ]; then
-  XDG_CONFIG_DIRS=$XDG_CONFIG_DIRS:/etc/xfce/xdg
-else
-  XDG_CONFIG_DIRS=/etc/xdg:/etc/xfce/xdg
-fi
-export XDG_CONFIG_DIRS
diff --git a/source/xap/xfce/slack-desc b/source/xap/xfce/slack-desc
deleted file mode 100644
index ecedf010..00000000
--- a/source/xap/xfce/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-xfce: xfce (a fast and lightweight desktop environment for X)
-xfce:
-xfce: Xfce is a fast and lightweight desktop environment that is both
-xfce: visually appealing and easy to use.
-xfce:
-xfce: For more information, see:  http://www.xfce.org
-xfce:
-xfce: Xfce was developed by Olivier Fourdan.
-xfce:
-xfce:
-xfce:
diff --git a/source/xap/xfce/xfce.SlackBuild b/source/xap/xfce/xfce.SlackBuild
deleted file mode 100755
index aaa38f99..00000000
--- a/source/xap/xfce/xfce.SlackBuild
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/sh
-
-# Copyright 2003  Slackware Linux, Inc., Concord, CA, USA
-# Copyright 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-VERSION=4.6.2
-BUILD=${BUILD:-5}
-
-# A few tarballs have different versions; handle them here
-XDT_VERS=4.8.0		# xfce4-dev-tools version
-# We're going to ship xdt from xfce-4.8 since it's not used for building
-# release tarballs anyway, but it's handy to have around for building from 
-# git, and some folks might want to do that later...
-EXO_VERS=0.3.107	# exo version
-THUNAR_VERS=1.0.2	# thunar version
-GXE_VERS=2.6.0		# gtk-xfce-engine version
-TERM_VERS=0.4.6		# terminal version
-MPAD_VERS=0.2.16	# mousepad version
-XFWM_VERS=4.6.2		# xfwm4 version
-XFWMTHEME_VERS=4.6.0	# xfwm4-themes version
-SETTINGS_VERS=4.6.5	# xfce4-settings version
-SESSION_VERS=4.6.2	# xfce4-settings version
-PANEL_VERS=4.6.4	# xfce4-panel version
-XFCEGUI_VERS=4.6.4	# libxfcegui4 version
-XFCEMENU_VERS=4.6.2	# libxfce4menu version
-LIBUTIL_VERS=4.6.2	# libxfce4util version
-UTILS_VERS=4.6.2	# xfce-utils version
-APPFINDER_VERS=4.6.2	# xfce4-appfinder version
-XFCONF_VERS=4.6.2	# xfconf version
-XFDESKTOP_VERS=4.6.2	# xfdesktop version
-MIXER_VERS=4.6.1	# xfce4-mixer version
-XFPRINT_VERS=4.6.1	# xfprint version
-ORAGE_VERS=4.6.1	# orage version
-
-NUMJOBS=${NUMJOBS:--j6}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/xfce-build-dir}
-PKG=$TMP/package-xfce
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP || exit 1
-
-COMPRESSION=xz
-COMPRESSUTIL=xz
-
-for file in \
- xfce4-dev-tools-$XDT_VERS.tar.$COMPRESSION \
- libxfce4util-$LIBUTIL_VERS.tar.$COMPRESSION \
- xfconf-$XFCONF_VERS.tar.$COMPRESSION \
- libxfcegui4-$XFCEGUI_VERS.tar.$COMPRESSION \
- libxfce4menu-$XFCEMENU_VERS.tar.$COMPRESSION \
- exo-$EXO_VERS.tar.$COMPRESSION \
- xfce4-panel-$PANEL_VERS.tar.$COMPRESSION \
- Thunar-$THUNAR_VERS.tar.$COMPRESSION \
- xfce4-settings-$SETTINGS_VERS.tar.$COMPRESSION \
- xfce4-session-$SESSION_VERS.tar.$COMPRESSION \
- xfdesktop-$XFDESKTOP_VERS.tar.$COMPRESSION \
- xfwm4-$XFWM_VERS.tar.$COMPRESSION \
- xfce-utils-$UTILS_VERS.tar.$COMPRESSION \
- xfce4-mixer-$MIXER_VERS.tar.$COMPRESSION \
- xfprint-$XFPRINT_VERS.tar.$COMPRESSION \
- xfce4-appfinder-$APPFINDER_VERS.tar.$COMPRESSION \
- gtk-xfce-engine-$GXE_VERS.tar.$COMPRESSION \
- Terminal-$TERM_VERS.tar.$COMPRESSION \
- xfwm4-themes-$XFWMTHEME_VERS.tar.$COMPRESSION \
- mousepad-$MPAD_VERS.tar.$COMPRESSION \
- orage-$ORAGE_VERS.tar.$COMPRESSION ;
-do
-  $COMPRESSUTIL -dc $CWD/src/$file | tar xvf - || exit 1
-  cd $(basename $file .tar.$COMPRESSION) || exit 1
-    chown -R root:root .
-    find . \
-     \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-     -exec chmod 755 {} \; -o \
-     \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-     -exec chmod 644 {} \;
-  
-    # Here's where we patch or set up any other package-specific stuff:
-      # Patch to only show xfcalendar in XFce (otherwise it shows up in
-      # KDE's Lost & Found and does not work):
-      if [ "$file" = "orage-$ORAGE_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/xfcalendar.desktop.in.diff.gz | patch -p1 --verbose || exit 1
-      fi
-      # Make Thunar respect --docdir
-      if [ "$file" = "Thunar-$THUNAR_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/thunar-1.0.2-fixup_docdir.diff.gz | patch -p1 --verbose || exit 1
-        zcat $CWD/patches/Thunar.thunar-vfs-io-local.diff.gz | patch -p0 --verbose || exit 1
-      fi
-      # Fix the missing education icon in the desktop menu
-      if [ "$file" = "xfdesktop-$XFDESKTOP_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/xfdesktop-fix_education_icon.diff.gz | patch -p1 --verbose || exit 1
-      fi
-      # 1) Launch xfce through consolekit so that ck enabled stuff works in xfce
-      # 2) Fix comments in /etc/xfce/xdg/xfce4/Xft.xrdb 
-      #    http://bugzilla.xfce.org/show_bug.cgi?id=6314
-      # 3) Load system-wide .Xmodmap, not just the one in $HOME
-      if [ "$file" = "xfce-utils-$UTILS_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/xfce-utils.xinitrc.consolekit.diff.gz | patch -p1 --verbose || exit 1
-        zcat $CWD/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff.gz | patch -p1 --verbose || exit 1
-        zcat $CWD/patches/xfce-utils-load_systemwide_Xmodmap.diff.gz | patch -p1 --verbose || exit 1
-      fi
-      # Fix a couple of bugs from mousepad git
-      if [ "$file" = "mousepad-$MPAD_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/mousepad-fix_find_and_replace.diff.gz | patch -p1 --verbose || exit 1
-        zcat $CWD/patches/mousepad-fix_find.diff.gz | patch -p1 --verbose || exit 1
-      fi
-      # Fix a plugin moving bug in the panel
-      if [ "$file" = "xfce4-panel-$PANEL_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/no_sensitive_panel_during_plugin_moves.patch.gz | patch -p1 --verbose || exit 1
-      fi
-      # Start kde4 services instead of kde3
-      # http://bugzilla.xfce.org/show_bug.cgi?id=7382
-      if [ "$file" = "xfce4-session-$SESSION_VERS.tar.$COMPRESSION" ]; then
-        zcat $CWD/patches/xfsm-compat-kde.c-start-kde4-services.diff.gz | patch -p1 --verbose || exit 1
-      fi
-    # End patches/package-specific stuff
-
-    CFLAGS="$SLKCFLAGS" \
-    CXXFLAGS="$SLKCFLAGS" \
-    ./configure \
-      --prefix=/usr \
-      --libdir=/usr/lib${LIBDIRSUFFIX} \
-      --sysconfdir=/etc/xfce \
-      --mandir=/usr/man \
-      --docdir=/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) \
-      --htmldir=/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION)/html \
-      --disable-static \
-      --build=$ARCH-slackware-linux \
-      $PACKAGE_SPECIFIC_OPTIONS
-  
-    # Unset this now -- we're done with it
-    unset PACKAGE_SPECIFIC_OPTIONS
-  
-    make $NUMJOBS || make || exit 1
-    make install || exit 1
-    make install DESTDIR=$PKG
-  
-    mkdir -p $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION)
-    # This will cause errors, but won't miss any docs:
-    cp -a \
-      AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
-      NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
-     $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) \
-     2> /dev/null || true
-
-    # If there's a ChangeLog, installing at least part of the recent history
-    # is useful, but don't let it get totally out of control:
-    if [ -r ChangeLog ]; then
-      DOCSDIR=$(echo $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION))
-      cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-      touch -r ChangeLog $DOCSDIR/ChangeLog
-    fi
-
-  cd - ;
-done
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# The Rodent icon theme isn't xdg compliant, so it spews errors quite often
-# and just flat breaks some things here and there, so the Xfce team elected
-# not to ship it with 4.6.x.   In the meantime, we'll default to gnome.
-sed -i s/Rodent/gnome/ \
-  $PKG/etc/xfce/xdg/xfce4/xfconf/xfce-perchannel-xml/xsettings.xml
-
-# We're going to borrow the "applications-education" icons (six of them)
-# from the kde oxygen icon theme (it's LGPL)
-tar xf $CWD/icons.tar.xz -C $PKG/usr/share
-
-# We don't want any of those icon caches
-find $PKG/usr/share/icons -type f -name "index-theme.cache" -exec rm -f {} \;
-
-# Compress and if needed symlink the man pages:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-mkdir -p $PKG/etc/profile.d
-cp -a $CWD/profile.d/* $PKG/etc/profile.d
-chown root:root $PKG/etc/profile.d/*
-chmod 755 $PKG/etc/profile.d/*
-
-mkdir -p $PKG/etc/X11/xinit
-( cd $PKG/etc/X11/xinit
-  ln -sf ../../xfce/xdg/xfce4/xinitrc xinitrc.xfce
-  chmod 755 ../../xfce/xdg/xfce4/xinitrc
-)
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/xfce-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild b/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild
deleted file mode 100755
index 2f33dbd8..00000000
--- a/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for Xfce4-notifyd
-
-# Copyright 2008  Frank Caraballo <fecaraballo{at}gmail{dot}com>
-# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=xfce4-notifyd
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc/xfce \
-  --localstatedir=/var \
-  --enable-debug=no \
-  --build=$ARCH-slackware-linux
-
-make || exit 1
-make install-strip DESTDIR=$PKG || exit 1
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING INSTALL NEWS README TODO \
-    $PKG/usr/doc/$PKGNAM-$VERSION
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/xap/xfce4-power-manager/slack-desc b/source/xap/xfce4-power-manager/slack-desc
deleted file mode 100644
index d1dd7ec1..00000000
--- a/source/xap/xfce4-power-manager/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                   |-----handy-ruler------------------------------------------------|
-xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
-xfce4-power-manager:
-xfce4-power-manager: xfce4-power-manager makes power management functions (such as
-xfce4-power-manager: suspend and hibernate) easy inside the Xfce Desktop Environment
-xfce4-power-manager: (but it should also work in any other desktop environment).
-xfce4-power-manager:
-xfce4-power-manager:
-xfce4-power-manager:
-xfce4-power-manager:
-xfce4-power-manager:
-xfce4-power-manager:
diff --git a/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild b/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild
deleted file mode 100755
index 1aa24bde..00000000
--- a/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for xfce4-power-manager
-
-# Copyright 2006-2010  Robby Workman  Northport, Alabama, USA
-# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-PKGNAM=xfce4-power-manager
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP || exit 1
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
-cd $PKGNAM-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc/xfce \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --enable-shared=yes \
-  --enable-static=no \
-  --enable-debug=no \
-  --disable-network-manager \
-  --build=$ARCH-slackware-linux
-
-make || exit 1
-make install DESTDIR=$PKG
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-gzip -9 $PKG/usr/man/man?/*.?
-
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html
-cp -a \
-  AUTHORS COPYING NEWS README TODO \
-    $PKG/usr/doc/$PKGNAM-$VERSION
-( cd $PKG/usr/doc/$PKGNAM-$VERSION/html
-  ln -s /usr/share/xfce4/doc/C/xfce4-power-manager.html index.html
-  ln -s /usr/share/xfce4/doc/C/images .
-)
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/xap/xfractint/xfractint.SlackBuild b/source/xap/xfractint/xfractint.SlackBuild
index 1ae5e6fe..e6b8bb4d 100755
--- a/source/xap/xfractint/xfractint.SlackBuild
+++ b/source/xap/xfractint/xfractint.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2007, 2008, 2009  Patrick Volkerding, Sebeka, MN, USA
+# Copyright 2007, 2008, 2009, 2012  Patrick Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,16 +22,46 @@
 
 
 PKGNAM=xfractint
-VERSION=${VERSION:-20.04p09}
-ARCH=${ARCH:-x86_64}
+VERSION=${VERSION:-20.04p11}
 BUILD=${BUILD:-1}
 
-if [ "$ARCH" = "i486" ]; then
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
 fi
 
 CWD=$(pwd)
@@ -42,7 +72,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/xfractint-${VERSION}.tar.bz2 || exit 1
+tar xvf $CWD/xfractint-${VERSION}.tar.xz || exit 1
 cd ${PKGNAM}-${VERSION} || exit 1
 
 rm -f unix/calmanfx.o # contains i386 code
diff --git a/source/xap/xine-lib/xine-lib.SlackBuild b/source/xap/xine-lib/xine-lib.SlackBuild
index c1127593..97391f39 100755
--- a/source/xap/xine-lib/xine-lib.SlackBuild
+++ b/source/xap/xine-lib/xine-lib.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,11 +22,13 @@
 
 
 # Version on the tarball
-VERSION=1.1.19
+VERSION=1.1.21
 # Version used in the source directory to cd into
-DIRVER=1.1.19
+DIRVER=1.1.21
 # Version used for the Slackware package
-PKGVER=1.1.19
+PKGVER=1.1.21
+
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -41,7 +43,6 @@ fi
 # I would use "-march=i486 -mtune=i686" here as usual, but with XINE it's all or nothing.
 # I'd rather have it work well for the i686/Athlon crowd than suck for everyone.
 TARGET=${TARGET:-$ARCH-pc-linux-gnu}
-BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -64,6 +65,9 @@ cd xine-lib-$DIRVER || exit 1
 
 zcat $CWD/xine-lib.XvMClib.h.diff.gz | patch -p1 --verbose || exit 1
 
+# Fix for zlib-1.2.6 (or higher):
+sed -i 's#gzgetc(#gzgetc_(#' src/xine-engine/osd.c
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/xap/xine-ui/xine-ui.SlackBuild b/source/xap/xine-ui/xine-ui.SlackBuild
index 61650223..65a18c18 100755
--- a/source/xap/xine-ui/xine-ui.SlackBuild
+++ b/source/xap/xine-ui/xine-ui.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,7 +24,7 @@
 VERSION=${VERSION:-$(echo xine-ui-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 # I would use "-march=i486 -mcpu=i686" here as usual, but with XINE it's all or nothing.
 # I'd rather have it work well for the i686/Athlon crowd than suck for everyone.
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -47,11 +47,9 @@ mkdir -p $TMP $PKG/usr
 
 cd $TMP
 rm -rf xine-ui-$VERSION
-tar xvf $CWD/xine-ui-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/xine-ui-$VERSION.tar.?z* || exit 1
 cd xine-ui-$VERSION || exit 1
 
-zcat $CWD/xine-ui.png14.diff.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -59,11 +57,15 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \;
 
+zcat $CWD/xine-ui.no.deprecated.curl.headers.diff.gz | patch -p1 --verbose || exit 1
+
 XINE_BUILD=$TARGET \
 ./configure \
   --prefix=/usr \
   --with-aalib \
   --with-caca \
+  --disable-lirc \
+  --mandir=/usr/man \
   --build=$TARGET
 
 make $NUMJOBS || make || exit 1
diff --git a/source/xap/xine-ui/xine-ui.no.deprecated.curl.headers.diff b/source/xap/xine-ui/xine-ui.no.deprecated.curl.headers.diff
new file mode 100644
index 00000000..63e57717
--- /dev/null
+++ b/source/xap/xine-ui/xine-ui.no.deprecated.curl.headers.diff
@@ -0,0 +1,11 @@
+--- ./src/xitk/download.c.orig	2009-12-18 18:34:22.000000000 -0600
++++ ./src/xitk/download.c	2012-09-09 12:47:15.757552304 -0500
+@@ -28,8 +28,6 @@
+ 
+ #ifdef HAVE_CURL
+ #include <curl/curl.h>
+-#include <curl/types.h>
+-#include <curl/easy.h>
+ #endif
+ 
+ #include "common.h"
diff --git a/source/xap/xine-ui/xine-ui.png14.diff b/source/xap/xine-ui/xine-ui.png14.diff
deleted file mode 100644
index 35a06513..00000000
--- a/source/xap/xine-ui/xine-ui.png14.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./src/xitk/Imlib-light/load.c.orig	2003-07-14 17:44:10.000000000 -0500
-+++ ./src/xitk/Imlib-light/load.c	2010-02-19 13:41:27.000000000 -0600
-@@ -193,7 +193,7 @@
-     return 0;
-   fread(buf, 1, 8, f);
-   rewind(f);
--  return (int)png_check_sig(buf, 8);
-+  return (int)(png_sig_cmp(buf, 0, 8) == 0);
- }
- 
- ImlibImage * Imlib_load_image(ImlibData * id, char *file) {
diff --git a/source/xap/xlockmore/xlockmore.SlackBuild b/source/xap/xlockmore/xlockmore.SlackBuild
index 09ce261f..c7ced75b 100755
--- a/source/xap/xlockmore/xlockmore.SlackBuild
+++ b/source/xap/xlockmore/xlockmore.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 PKGNAM=xlockmore
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
@@ -63,7 +63,7 @@ mkdir -p $TMP $PKG
 
 cd $TMP
 rm -rf xlockmore-$VERSION
-tar xvf $CWD/xlockmore-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/xlockmore-$VERSION.tar.?z* || exit 1
 cd xlockmore-$VERSION || exit 1
 chown -R root:root .
 find . \
diff --git a/source/xap/xpdf/patches/03-float.patch b/source/xap/xpdf/patches/03-float.patch
new file mode 100644
index 00000000..208c765a
--- /dev/null
+++ b/source/xap/xpdf/patches/03-float.patch
@@ -0,0 +1,25 @@
+description: fix a floating point quirk that is exposed by gcc 4.4
+ (this was leading to slow pdf document scrolling on i386)
+author: Michael Gilbert <michael.s.gilbert@gmail.com>
+bug-debian: http://bugs.debian.org/577031
+--- xpdf-3.02.orig/xpdf/PDFCore.h
++++ xpdf-3.02/xpdf/PDFCore.h
+@@ -40,6 +40,7 @@ class PDFCore;
+ #define zoomPage  -1
+ #define zoomWidth -2
+ #define defZoom   125
++#define EPSILON   1.0e-7	// 32-bit floating point machine precision
+ 
+ //------------------------------------------------------------------------
+ 
+--- xpdf-3.02.orig/xpdf/PDFCore.cc
++++ xpdf-3.02/xpdf/PDFCore.cc
+@@ -445,7 +445,7 @@ void PDFCore::update(int topPageA, int s
+   // object
+   if (force || pages->getLength() == 0 ||
+       (!continuousMode && topPageA != topPage) ||
+-      zoomA != zoom || dpiA != dpi || rotateA != rotate) {
++      zoomA != zoom || fabs( dpiA - dpi ) > EPSILON || rotateA != rotate) {
+     needUpdate = gTrue;
+     setSelection(0, 0, 0, 0, 0);
+     while (pages->getLength() > 0) {
diff --git a/source/xap/xpdf/xpdf.SlackBuild b/source/xap/xpdf/xpdf.SlackBuild
index b19b3aca..6093f21d 100755
--- a/source/xap/xpdf/xpdf.SlackBuild
+++ b/source/xap/xpdf/xpdf.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 VERSION=3.02
 PATCHLEVEL=pl6
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 NUMJOBS=${NUMJOBS:-" -j7 "}
 
@@ -78,6 +78,7 @@ cat $CWD/patches/xpdf-3.02pl4.patch | patch -p1 --verbose || exit 1
 cat $CWD/patches/xpdf-3.02pl5.patch | patch -p1 --verbose || exit 1
 zcat $CWD/patches/xpdf_3.02-1.3.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/patches/xpdfrc.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/patches/03-float.patch.gz | patch -p1 --verbose || exit 1
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
@@ -89,7 +90,7 @@ CXXFLAGS="$SLKCFLAGS" \
   --with-gzip \
   --with-freetype2-includes=/usr/include/freetype2 \
   --without-t1-library \
-  --build=$ARCH-slackware-linux
+  --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/xap/xsane/xsane.SlackBuild b/source/xap/xsane/xsane.SlackBuild
index 1b711715..b301d081 100755
--- a/source/xap/xsane/xsane.SlackBuild
+++ b/source/xap/xsane/xsane.SlackBuild
@@ -22,7 +22,7 @@
 
 
 VERSION=0.998
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/xscreensaver/xscreensaver-getimage-file-5.14 b/source/xap/xscreensaver/xscreensaver-getimage-file-5.14
new file mode 100644
index 00000000..bc7bcbd9
--- /dev/null
+++ b/source/xap/xscreensaver/xscreensaver-getimage-file-5.14
@@ -0,0 +1,555 @@
+#!/usr/bin/perl -w
+# Copyright © 2001-2011 Jamie Zawinski <jwz@jwz.org>.
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation.  No representations are made about the suitability of this
+# software for any purpose.  It is provided "as is" without express or 
+# implied warranty.
+#
+# This program chooses a random file from under the given directory, and
+# prints its name.  The file will be an image file whose dimensions are
+# larger than a certain minimum size.
+#
+# The various xscreensaver hacks that manipulate images ("jigsaw", etc.) get
+# the image to manipulate by running the "xscreensaver-getimage" program.
+#
+# Under X11, the "xscreensaver-getimage" program invokes this script,
+# depending on the value of the "chooseRandomImages" and "imageDirectory"
+# settings in the ~/.xscreensaver file (or .../app-defaults/XScreenSaver).
+# The screen savers invoke "xscreensaver-getimage" via utils/grabclient.c,
+# which then invokes this script.
+#
+# Under Cocoa, this script lives inside the .saver bundle, and is invoked
+# directly from utils/grabclient.c.
+#
+# Created: 12-Apr-01.
+
+require 5;
+#use diagnostics;	# Fails on some MacOS 10.5 systems
+use strict;
+
+use POSIX;
+use Fcntl;
+
+use Fcntl ':flock'; # import LOCK_* constants
+
+use POSIX ':fcntl_h';				# S_ISDIR was here in Perl 5.6
+import Fcntl ':mode' unless defined &S_ISUID;	# but it is here in Perl 5.8
+	# but in Perl 5.10, both of these load, and cause errors!
+	# So we have to check for S_ISUID instead of S_ISDIR?  WTF?
+
+use bytes;  # Larry can take Unicode and shove it up his ass sideways.
+            # Perl 5.8.0 causes us to start getting incomprehensible
+            # errors about UTF-8 all over the place without this.
+
+my $progname = $0; $progname =~ s@.*/@@g;
+my $version = q{ $Revision: 1.29 $ }; $version =~ s/^[^0-9]+([0-9.]+).*$/$1/;
+
+my $verbose = 0;
+
+# Whether to use MacOS X's Spotlight to generate the list of files.
+# When set to -1, uses Spotlight if "mdfind" exists.
+#
+# (In my experience, this isn't actually any faster, and might not find
+# everything if your Spotlight index is out of date, which happens often.)
+#
+my $use_spotlight_p = 0;
+
+# Whether to cache the results of the last run.
+#
+my $cache_p = 1;
+
+# Regenerate the cache if it is older than this many seconds.
+#
+my $cache_max_age = 60 * 60 * 3;   # 3 hours
+
+
+# This matches files that we are allowed to use as images (case-insensitive.)
+# Anything not matching this is ignored.  This is so you can point your
+# imageDirectory at directory trees that have things other than images in
+# them, but it assumes that you gave your images sensible file extensions.
+#
+my @good_extensions = ('jpg', 'jpeg', 'pjpeg', 'pjpg', 'png', 'gif',
+                       'tif', 'tiff', 'xbm', 'xpm');
+my $good_file_re = '\.(' . join("|", @good_extensions) . ')$';
+
+# This matches file extensions that might occur in an image directory,
+# and that are never used in the name of a subdirectory.  This is an
+# optimization that prevents us from having to stat() those files to
+# tell whether they are directories or not.  (It speeds things up a
+# lot.  Don't give your directories stupid names.)
+#
+my @nondir_extensions = ('ai', 'bmp', 'bz2', 'cr2', 'crw', 'db',
+   'dmg', 'eps', 'gz', 'hqx', 'htm', 'html', 'icns', 'ilbm', 'mov',
+   'nef', 'pbm', 'pdf', 'pl', 'ppm', 'ps', 'psd', 'sea', 'sh', 'shtml',
+   'tar', 'tgz', 'thb', 'txt', 'xcf', 'xmp', 'Z', 'zip' );
+my $nondir_re = '\.(' . join("|", @nondir_extensions) . ')$';
+
+
+# JPEG, GIF, and PNG files that are are smaller than this are rejected:
+# this is so that you can use an image directory that contains both big
+# images and thumbnails, and have it only select the big versions.
+#
+my $min_image_width  = 255;
+my $min_image_height = 255;
+
+my @all_files = ();         # list of "good" files we've collected
+my %seen_inodes;            # for breaking recursive symlink loops
+
+# For diagnostic messages:
+#
+my $dir_count = 1;          # number of directories seen
+my $stat_count = 0;	    # number of files/dirs stat'ed
+my $skip_count_unstat = 0;  # number of files skipped without stat'ing
+my $skip_count_stat = 0;    # number of files skipped after stat
+
+sub find_all_files($);
+sub find_all_files($) {
+  my ($dir) = @_;
+
+  print STDERR "$progname:  + reading dir $dir/...\n" if ($verbose > 1);
+
+  my $dd;
+  if (! opendir ($dd, $dir)) {
+    print STDERR "$progname: couldn't open $dir: $!\n" if ($verbose);
+    return;
+  }
+  my @files = readdir ($dd);
+  closedir ($dd);
+
+  my @dirs = ();
+
+  foreach my $file (@files) {
+    next if ($file =~ m/^\./);      # silently ignore dot files/dirs
+
+    if ($file =~ m/[~%\#]$/) {      # ignore backup files (and dirs...)
+      $skip_count_unstat++;
+      print STDERR "$progname:  - skip file  $file\n" if ($verbose > 1);
+    }
+
+    $file = "$dir/$file";
+
+    if ($file =~ m/$good_file_re/io) {
+      #
+      # Assume that files ending in .jpg exist and are not directories.
+      #
+      push @all_files, $file;
+      print STDERR "$progname:  - found file $file\n" if ($verbose > 1);
+
+    } elsif ($file =~ m/$nondir_re/io) {
+      #
+      # Assume that files ending in .html are not directories.
+      #
+      $skip_count_unstat++;
+      print STDERR "$progname: -- skip file  $file\n" if ($verbose > 1);
+
+    } else {
+      #
+      # Now we need to stat the file to see if it's a subdirectory.
+      #
+      # Note: we could use the trick of checking "nlinks" on the parent
+      # directory to see if this directory contains any subdirectories,
+      # but that would exclude any symlinks to directories.
+      #
+      my @st = stat($file);
+      my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
+          $atime,$mtime,$ctime,$blksize,$blocks) = @st;
+
+      $stat_count++;
+
+      if ($#st == -1) {
+        if ($verbose) {
+          my $ll = readlink $file;
+          if (defined ($ll)) {
+            print STDERR "$progname: + dangling symlink: $file -> $ll\n";
+          } else {
+            print STDERR "$progname: + unreadable: $file\n";
+          }
+        }
+        next;
+      }
+
+      next if ($seen_inodes{"$dev:$ino"}); # break symlink loops
+      $seen_inodes{"$dev:$ino"} = 1;
+
+      if (S_ISDIR($mode)) {
+        push @dirs, $file;
+        $dir_count++;
+        print STDERR "$progname:  + found dir  $file\n" if ($verbose > 1);
+
+      } else {
+        $skip_count_stat++;
+        print STDERR "$progname:  + skip file  $file\n" if ($verbose > 1);
+      }
+    }
+  }
+
+  foreach (@dirs) {
+    find_all_files ($_);
+  }
+}
+
+
+sub spotlight_all_files($) {
+  my ($dir) = @_;
+
+  my @terms = ();
+  # "public.image" matches all (indexed) images, including Photoshop, etc.
+#  push @terms, "kMDItemContentTypeTree == 'public.image'";
+  foreach (@good_extensions) {
+
+    # kMDItemFSName hits the file system every time: much worse than "find".
+#    push @terms, "kMDItemFSName == '*.$_'";
+
+    # kMDItemDisplayName matches against the name in the Spotlight index,
+    # but won't find files that (for whatever reason) didn't get indexed.
+    push @terms, "kMDItemDisplayName == '*.$_'";
+  }
+
+  $dir =~ s@([^-_/a-z\d.,])@\\$1@gsi;  # quote for sh
+  my $cmd = "mdfind -onlyin $dir \"" . join (' || ', @terms) . "\"";
+
+  print STDERR "$progname: executing: $cmd\n" if ($verbose > 1);
+  @all_files = split (/[\r\n]+/, `$cmd`);
+}
+
+
+# If we're using cacheing, read the cache file and return its contents,
+# if any.  This also holds an exclusive lock on the cache file, which 
+# has the additional benefit that if two copies of this program are
+# running at once, one will wait for the other, instead of both of
+# them spanking the same file system at the same time.
+#
+my $cache_fd = undef;
+my $cache_file_name = undef;
+my $read_cache_p = 0;
+
+sub read_cache($) {
+  my ($dir) = @_;
+
+  return () unless ($cache_p);
+
+  my $dd = "$ENV{HOME}/Library/Caches";    # MacOS location
+  if (-d $dd) {
+    $cache_file_name = "$dd/org.jwz.xscreensaver.getimage.cache";
+  } elsif (-d "$ENV{HOME}/tmp") {
+    $cache_file_name = "$ENV{HOME}/tmp/.xscreensaver-getimage.cache";
+  } else {
+    $cache_file_name = "$ENV{HOME}/.xscreensaver-getimage.cache";
+  }
+
+  print STDERR "$progname: awaiting lock: $cache_file_name\n"
+    if ($verbose > 1);
+
+  my $file = $cache_file_name;
+  open ($cache_fd, '+>>', $file) || error ("unable to write $file: $!");
+  flock ($cache_fd, LOCK_EX)     || error ("unable to lock $file: $!");
+  seek ($cache_fd, 0, 0)         || error ("unable to rewind $file: $!");
+
+  my $mtime = (stat($cache_fd))[9];
+
+  if ($mtime + $cache_max_age < time) {
+    print STDERR "$progname: cache is too old\n" if ($verbose);
+    return ();
+  }
+
+  my $odir = <$cache_fd>;
+  $odir =~ s/[\r\n]+$//s if defined ($odir);
+  if (!defined ($odir) || ($dir ne $odir)) {
+    print STDERR "$progname: cache is for $odir, not $dir\n"
+      if ($verbose && $odir);
+    return ();
+  }
+
+  my @files = ();
+  while (<$cache_fd>) { 
+    s/[\r\n]+$//s;
+    push @files, "$odir/$_";
+  }
+
+  print STDERR "$progname: " . ($#files+1) . " files in cache\n"
+    if ($verbose);
+
+  $read_cache_p = 1;
+  return @files;
+}
+
+
+sub write_cache($) {
+  my ($dir) = @_;
+
+  return unless ($cache_p);
+
+  # If we read the cache, just close it without rewriting it.
+  # If we didn't read it, then write it now.
+
+  if (! $read_cache_p) {
+
+    truncate ($cache_fd, 0) ||
+      error ("unable to truncate $cache_file_name: $!");
+    seek ($cache_fd, 0, 0) ||
+      error ("unable to rewind $cache_file_name: $!");
+
+    if ($#all_files >= 0) {
+      print $cache_fd "$dir\n";
+      foreach (@all_files) {
+        my $f = $_; # stupid Perl. do this to avoid modifying @all_files!
+        $f =~ s@^\Q$dir\L/@@so || die;  # remove $dir from front
+        print $cache_fd "$f\n";
+      }
+    }
+
+    print STDERR "$progname: cached " . ($#all_files+1) . " files\n"
+      if ($verbose);
+  }
+
+  flock ($cache_fd, LOCK_UN) ||
+    error ("unable to unlock $cache_file_name: $!");
+  close ($cache_fd);
+  $cache_fd = undef;
+}
+
+
+sub find_random_file($) {
+  my ($dir) = @_;
+
+  if ($use_spotlight_p == -1) {
+    $use_spotlight_p = 0;
+    if (-x '/usr/bin/mdfind') {
+      $use_spotlight_p = 1;
+    }
+  }
+
+  @all_files = read_cache ($dir);
+
+  if ($#all_files >= 0) {
+    # got it from the cache...
+
+  } elsif ($use_spotlight_p) {
+    print STDERR "$progname: spotlighting $dir...\n" if ($verbose);
+    spotlight_all_files ($dir);
+    print STDERR "$progname: found " . ($#all_files+1) .
+                 " file" . ($#all_files == 0 ? "" : "s") .
+                 " via Spotlight\n"
+      if ($verbose);
+  } else {
+    print STDERR "$progname: recursively reading $dir...\n" if ($verbose);
+    find_all_files ($dir);
+    print STDERR "$progname: " .
+                 "f=" . ($#all_files+1) . "; " .
+                 "d=$dir_count; " .
+                 "s=$stat_count; " .
+                 "skip=${skip_count_unstat}+$skip_count_stat=" .
+                  ($skip_count_unstat + $skip_count_stat) .
+                 ".\n"
+      if ($verbose);
+  }
+
+  write_cache ($dir);
+
+#  @all_files = sort(@all_files);
+
+  if ($#all_files < 0) {
+    print STDERR "$progname: no files in $dir\n";
+    exit 1;
+  }
+
+  my $max_tries = 50;
+  for (my $i = 0; $i < $max_tries; $i++) {
+
+    my $n = int (rand ($#all_files + 1));
+    my $file = $all_files[$n];
+    if (large_enough_p ($file)) {
+      $file =~ s@^\Q$dir\L/@@so || die;  # remove $dir from front
+      return $file;
+    }
+  }
+
+  print STDERR "$progname: no suitable images in $dir " .
+               "(after $max_tries tries)\n";
+  exit 1;
+}
+
+
+sub large_enough_p($) {
+  my ($file) = @_;
+
+  my ($w, $h) = image_file_size ($file);
+
+  if (!defined ($h)) {
+    print STDERR "$progname: $file: unable to determine image size\n"
+      if ($verbose);
+    # Assume that unknown files are of good sizes: this will happen if
+    # they matched $good_file_re, but we don't have code to parse them.
+    # (This will also happen if the file is junk...)
+    return 1;
+  }
+
+  if ($w < $min_image_width || $h < $min_image_height) {
+    print STDERR "$progname: $file: too small ($w x $h)\n" if ($verbose);
+    return 0;
+  }
+
+  print STDERR "$progname: $file: $w x $h\n" if ($verbose);
+  return 1;
+}
+
+
+
+# Given the raw body of a GIF document, returns the dimensions of the image.
+#
+sub gif_size($) {
+  my ($body) = @_;
+  my $type = substr($body, 0, 6);
+  my $s;
+  return () unless ($type =~ /GIF8[7,9]a/);
+  $s = substr ($body, 6, 10);
+  my ($a,$b,$c,$d) = unpack ("C"x4, $s);
+  return (($b<<8|$a), ($d<<8|$c));
+}
+
+# Given the raw body of a JPEG document, returns the dimensions of the image.
+#
+sub jpeg_size($) {
+  my ($body) = @_;
+  my $i = 0;
+  my $L = length($body);
+
+  my $c1 = substr($body, $i, 1); $i++;
+  my $c2 = substr($body, $i, 1); $i++;
+  return () unless (ord($c1) == 0xFF && ord($c2) == 0xD8);
+
+  my $ch = "0";
+  while (ord($ch) != 0xDA && $i < $L) {
+    # Find next marker, beginning with 0xFF.
+    while (ord($ch) != 0xFF) {
+      return () if (length($body) <= $i);
+      $ch = substr($body, $i, 1); $i++;
+    }
+    # markers can be padded with any number of 0xFF.
+    while (ord($ch) == 0xFF) {
+      return () if (length($body) <= $i);
+      $ch = substr($body, $i, 1); $i++;
+    }
+
+    # $ch contains the value of the marker.
+    my $marker = ord($ch);
+
+    if (($marker >= 0xC0) &&
+        ($marker <= 0xCF) &&
+        ($marker != 0xC4) &&
+        ($marker != 0xCC)) {  # it's a SOFn marker
+      $i += 3;
+      return () if (length($body) <= $i);
+      my $s = substr($body, $i, 4); $i += 4;
+      my ($a,$b,$c,$d) = unpack("C"x4, $s);
+      return (($c<<8|$d), ($a<<8|$b));
+
+    } else {
+      # We must skip variables, since FFs in variable names aren't
+      # valid JPEG markers.
+      return () if (length($body) <= $i);
+      my $s = substr($body, $i, 2); $i += 2;
+      my ($c1, $c2) = unpack ("C"x2, $s);
+      my $length = ($c1 << 8) | $c2;
+      return () if ($length < 2);
+      $i += $length-2;
+    }
+  }
+  return ();
+}
+
+# Given the raw body of a PNG document, returns the dimensions of the image.
+#
+sub png_size($) {
+  my ($body) = @_;
+  return () unless ($body =~ m/^\211PNG\r/s);
+  my ($bits) = ($body =~ m/^.{12}(.{12})/s);
+  return () unless defined ($bits);
+  return () unless ($bits =~ /^IHDR/);
+  my ($ign, $w, $h) = unpack("a4N2", $bits);
+  return ($w, $h);
+}
+
+
+# Given the raw body of a GIF, JPEG, or PNG document, returns the dimensions
+# of the image.
+#
+sub image_size($) {
+  my ($body) = @_;
+  return () if (length($body) < 10);
+  my ($w, $h) = gif_size ($body);
+  if ($w && $h) { return ($w, $h); }
+  ($w, $h) = jpeg_size ($body);
+  if ($w && $h) { return ($w, $h); }
+  # #### TODO: need image parsers for TIFF, XPM, XBM.
+  return png_size ($body);
+}
+
+# Returns the dimensions of the image file.
+#
+sub image_file_size($) {
+  my ($file) = @_;
+  my $in;
+  if (! open ($in, '<', $file)) {
+    print STDERR "$progname: $file: $!\n" if ($verbose);
+    return undef;
+  }
+  binmode ($in);  # Larry can take Unicode and shove it up his ass sideways.
+  my $body = '';
+  sysread ($in, $body, 1024 * 50);  # The first 50k should be enough.
+  close $in;			    # (It's not for certain huge jpegs...
+  return image_size ($body);	    # but we know they're huge!)
+}
+
+
+sub error($) {
+  my ($err) = @_;
+  print STDERR "$progname: $err\n";
+  exit 1;
+}
+
+sub usage() {
+  print STDERR "usage: $progname [--verbose] directory\n" .
+  "       Prints the name of a randomly-selected image file.  The directory\n" .
+  "       is searched recursively.  Images smaller than " .
+         "${min_image_width}x${min_image_height} are excluded.\n";
+  exit 1;
+}
+
+sub main() {
+  my $dir = undef;
+
+  while ($_ = $ARGV[0]) {
+    shift @ARGV;
+    if ($_ eq "--verbose") { $verbose++; }
+    elsif (m/^-v+$/) { $verbose += length($_)-1; }
+    elsif ($_ eq "--name") { }     # ignored, for compatibility
+    elsif ($_ eq "--spotlight")    { $use_spotlight_p = 1; }
+    elsif ($_ eq "--no-spotlight") { $use_spotlight_p = 0; }
+    elsif ($_ eq "--cache")        { $cache_p = 1; }
+    elsif ($_ eq "--no-cache")     { $cache_p = 0; }
+    elsif (m/^-./) { usage; }
+    elsif (!defined($dir)) { $dir = $_; }
+    else { usage; }
+  }
+
+  usage unless (defined($dir));
+
+  $dir =~ s@^~/@$ENV{HOME}/@s;     # allow literal "~/"
+  $dir =~ s@/+$@@s;		   # omit trailing /
+
+  if (! -d $dir) {
+    print STDERR "$progname: $dir: not a directory\n";
+    usage;
+  }
+
+  my $file = find_random_file ($dir);
+  print STDOUT "$file\n";
+}
+
+main;
+exit 0;
diff --git a/source/xap/xscreensaver/xscreensaver.SlackBuild b/source/xap/xscreensaver/xscreensaver.SlackBuild
index 57943911..830c4dd9 100755
--- a/source/xap/xscreensaver/xscreensaver.SlackBuild
+++ b/source/xap/xscreensaver/xscreensaver.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-$(echo xscreensaver-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -106,6 +106,12 @@ cp -a \
   README* \
   $PKG/usr/doc/xscreensaver-$VERSION
 
+# Insert an older version of xscreensaver-getimage-file to avoid depending
+# on libwww-perl.  Maybe we'll eventually add this, but bundling 14 perl
+# modules is a lot of maintainance just to get slidescreen working again.
+# This restores the functionality that we had before without all that.
+cat $CWD/xscreensaver-getimage-file-5.14 > $PKG/usr/bin/xscreensaver-getimage-file
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/source/xfce/Terminal/Terminal.SlackBuild b/source/xfce/Terminal/Terminal.SlackBuild
new file mode 100755
index 00000000..f5335b2e
--- /dev/null
+++ b/source/xfce/Terminal/Terminal.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for Xfce Terminal
+
+# Copyright 2010,2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=Terminal
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* THANKS TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/Terminal/slack-desc b/source/xfce/Terminal/slack-desc
new file mode 100644
index 00000000..23121078
--- /dev/null
+++ b/source/xfce/Terminal/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+Terminal: Terminal (Xfce's Terminal Emulator)
+Terminal:
+Terminal: This is the Terminal emulator application.  Terminal is a lightweight
+Terminal: and easy to use terminal emulator for the X windowing system, with 
+Terminal: some new ideas and features that makes it unique among X terminal 
+Terminal: emulators.
+Terminal:
+Terminal:
+Terminal:
+Terminal:
+Terminal:
diff --git a/source/xfce/Thunar/Thunar.SlackBuild b/source/xfce/Thunar/Thunar.SlackBuild
new file mode 100755
index 00000000..54f72b77
--- /dev/null
+++ b/source/xfce/Thunar/Thunar.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=Thunar
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/Thunar/slack-desc b/source/xfce/Thunar/slack-desc
new file mode 100644
index 00000000..afd93c05
--- /dev/null
+++ b/source/xfce/Thunar/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+Thunar: Thunar (file manager)
+Thunar:
+Thunar: Thunar is a modern file manager for the Xfce Desktop Environment.
+Thunar: Thunar has been designed from the ground up to be fast and
+Thunar: easy-to-use.  Its user interface is clean and intuitive, and does not
+Thunar: include any confusing or useless options.  Thunar is fast and
+Thunar: responsive with a good start up time and directory load time.
+Thunar:
+Thunar: Homepage:  http://thunar.xfce.org
+Thunar:
+Thunar:
diff --git a/source/xfce/exo/exo.SlackBuild b/source/xfce/exo/exo.SlackBuild
new file mode 100755
index 00000000..a3189a58
--- /dev/null
+++ b/source/xfce/exo/exo.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=exo
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/exo/slack-desc b/source/xfce/exo/slack-desc
new file mode 100644
index 00000000..6bd9c826
--- /dev/null
+++ b/source/xfce/exo/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+exo: exo (libexo extension library)
+exo:
+exo: This is libexo, an extension library to Xfce, developed by
+exo: os-cillation.  While Xfce comes with quite a few libraries that are
+exo: targeted at desktop development, libexo is targeted at application
+exo: development.  It also has some helper applications that are used
+exo: throughout the entire desktop.
+exo:
+exo: 
+exo:
+exo:
diff --git a/source/xfce/garcon/garcon.SlackBuild b/source/xfce/garcon/garcon.SlackBuild
new file mode 100755
index 00000000..f60c47f9
--- /dev/null
+++ b/source/xfce/garcon/garcon.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=garcon
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/garcon/slack-desc b/source/xfce/garcon/slack-desc
new file mode 100644
index 00000000..abc2d786
--- /dev/null
+++ b/source/xfce/garcon/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+garcon: garcon (menu implementation for Xfce)
+garcon:
+garcon: This is garcon, a freedesktop.org compliant menu implementation based
+garcon: on GLib and GIO.  It was started as a rewrite of the former Xfce menu
+garcon: library called libxfce4menu.
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
diff --git a/source/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild b/source/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild
new file mode 100755
index 00000000..8e9454c1
--- /dev/null
+++ b/source/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gtk-xfce-engine
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/gtk-xfce-engine/slack-desc b/source/xfce/gtk-xfce-engine/slack-desc
new file mode 100644
index 00000000..1ccfa128
--- /dev/null
+++ b/source/xfce/gtk-xfce-engine/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+gtk-xfce-engine: gtk-xfce-engine (Xfce Gtk+ engines)
+gtk-xfce-engine:
+gtk-xfce-engine: The GTK-Xfce-Engine package contains several GTK+-2/3 themes and the
+gtk-xfce-engine: applications and libraries needed to display them.  This is useful for
+gtk-xfce-engine: customizing the appearance of your Xfce desktop.
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
diff --git a/source/xfce/libxfce4ui/libxfce4ui.SlackBuild b/source/xfce/libxfce4ui/libxfce4ui.SlackBuild
new file mode 100755
index 00000000..3762c747
--- /dev/null
+++ b/source/xfce/libxfce4ui/libxfce4ui.SlackBuild
@@ -0,0 +1,140 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfce4ui
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-vendor-info=Slackware \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Add vendor info in /usr/share/xfce4/Slackware
+mkdir -p $PKG/usr/share/xfce4
+echo "http://slackware.com/" > $PKG/usr/share/xfce4/Slackware
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/libxfce4ui/slack-desc b/source/xfce/libxfce4ui/slack-desc
new file mode 100644
index 00000000..d774e673
--- /dev/null
+++ b/source/xfce/libxfce4ui/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+libxfce4ui: libxfce4ui (Xfce widget library)
+libxfce4ui:
+libxfce4ui: This is libxfce4ui, the replacement of the old libxfcegui4 library.
+libxfce4ui: It is used to share commonly used Xfce widgets among the Xfce
+libxfce4ui: applications.
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
diff --git a/source/xfce/libxfce4util/libxfce4util.SlackBuild b/source/xfce/libxfce4util/libxfce4util.SlackBuild
new file mode 100755
index 00000000..8d19530d
--- /dev/null
+++ b/source/xfce/libxfce4util/libxfce4util.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfce4util
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/libxfce4util/slack-desc b/source/xfce/libxfce4util/slack-desc
new file mode 100644
index 00000000..b5c92596
--- /dev/null
+++ b/source/xfce/libxfce4util/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libxfce4util: libxfce4util (basic utility library for Xfce)
+libxfce4util:
+libxfce4util: Basic utility library for Xfce.  This provides useful functions not
+libxfce4util: relating to the handling of the user interface.
+libxfce4util: 
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
diff --git a/source/xfce/libxfcegui4/libxfcegui4.SlackBuild b/source/xfce/libxfcegui4/libxfcegui4.SlackBuild
new file mode 100755
index 00000000..d4af97ff
--- /dev/null
+++ b/source/xfce/libxfcegui4/libxfcegui4.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfcegui4
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/libxfcegui4/slack-desc b/source/xfce/libxfcegui4/slack-desc
new file mode 100644
index 00000000..8309460d
--- /dev/null
+++ b/source/xfce/libxfcegui4/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+libxfcegui4: libxfcegui4 (old Xfce widget library)
+libxfcegui4:
+libxfcegui4: This is a widget library for Xfce.  It has been replaced by the use
+libxfcegui4: of the libxfce4ui library, but older programs might still need it.
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
diff --git a/source/xfce/orage/orage.SlackBuild b/source/xfce/orage/orage.SlackBuild
new file mode 100755
index 00000000..9342007c
--- /dev/null
+++ b/source/xfce/orage/orage.SlackBuild
@@ -0,0 +1,121 @@
+#!/bin/sh
+
+# Slackware build script for orage
+
+# Copyright 2010,2011,2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=orage
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Yes, libical's pkgconfig file is incomplete, it seems
+CFLAGS="$SLKCFLAGS -I/usr/include/libical" \
+CXXFLAGS="$SLKCFLAGS -I/usr/include/libical" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/orage/slack-desc b/source/xfce/orage/slack-desc
new file mode 100644
index 00000000..665765d0
--- /dev/null
+++ b/source/xfce/orage/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+orage: orage (Xfce's calendar)
+orage:
+orage: Orage is a time-managing application for the Xfce desktop environment.
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
diff --git a/source/xfce/thunar-volman/slack-desc b/source/xfce/thunar-volman/slack-desc
new file mode 100644
index 00000000..900d22a4
--- /dev/null
+++ b/source/xfce/thunar-volman/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------|
+thunar-volman: thunar-volman (Thunar Volume Manager Plugin)
+thunar-volman: 
+thunar-volman: thunar-volman is an extension for the Thunar File Manager, 
+thunar-volman: which enables automatic management of removable drives and 
+thunar-volman: media. 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
diff --git a/source/xfce/thunar-volman/thunar-volman.SlackBuild b/source/xfce/thunar-volman/thunar-volman.SlackBuild
new file mode 100755
index 00000000..89fd5ab8
--- /dev/null
+++ b/source/xfce/thunar-volman/thunar-volman.SlackBuild
@@ -0,0 +1,103 @@
+#!/bin/sh
+
+# Slackware build script for thunar-volman
+
+# Copyright 2007-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=thunar-volman
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/xfce/tumbler/slack-desc b/source/xfce/tumbler/slack-desc
new file mode 100644
index 00000000..d40670e4
--- /dev/null
+++ b/source/xfce/tumbler/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+tumbler: tumbler (thumbnail generator)
+tumbler:
+tumbler: Tumbler is a D-Bus service for applications to request thumbnails
+tumbler: for various URI schemes and MIME types. It is written in an object-
+tumbler: oriented fashion using GLib and GObject.  It provides plugin
+tumbler: interfaces for extending the URI schemes and MIME types for which
+tumbler: thumbnails can be generated as well as for replacing the storage
+tumbler: backend that is used to store the thumbnails on disk. 
+tumbler:
+tumbler:
+tumbler:
diff --git a/source/xfce/tumbler/tumbler.SlackBuild b/source/xfce/tumbler/tumbler.SlackBuild
new file mode 100755
index 00000000..2b164913
--- /dev/null
+++ b/source/xfce/tumbler/tumbler.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=tumbler
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce-build-all.sh b/source/xfce/xfce-build-all.sh
new file mode 100755
index 00000000..0ad32cc7
--- /dev/null
+++ b/source/xfce/xfce-build-all.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Set to 1 if you'd like to install/upgrade package as they are built.
+# This is recommended.
+INST=1
+
+TMP=${TMP:-/tmp}
+
+for package in \
+  xfce4-dev-tools \
+  libxfce4util \
+  xfconf \
+  libxfce4ui \
+  libxfcegui4 \
+  exo \
+  garcon \
+  tumbler \
+  Thunar \
+  xfce4-panel \
+  xfce4-settings \
+  xfce4-session \
+  xfdesktop \
+  xfwm4 \
+  xfce4-appfinder \
+  gtk-xfce-engine \
+  xfwm4-themes \
+  Terminal \
+  orage \
+  xfce4-mixer \
+  thunar-volman \
+  xfce4-power-manager \
+  xfce4-notifyd \
+  xfce4-volumed \
+  xfce4-clipman-plugin \
+  xfce4-screenshooter \
+  xfce4-systemload-plugin \
+  xfce4-taskmanager \
+  xfce4-weather-plugin \
+  ; do
+  cd $package || exit 1
+  ./${package}.SlackBuild || ( touch /tmp/${package}.failed ; exit 1 ) || exit 1
+  if [ "$INST" = "1" ]; then
+    PACKAGE="$(ls -t $TMP/$(ls ${package}*.xz | rev | cut -f2- -d - | rev)-*txz | head -n 1)"
+    if [ -f $PACKAGE ]; then
+      upgradepkg --install-new --reinstall $PACKAGE
+    else
+      echo "Error:  package to upgrade "$PACKAGE" not found in $TMP"
+      exit 1
+    fi
+  fi
+  cd ..
+done
diff --git a/source/xfce/xfce4-appfinder/slack-desc b/source/xfce/xfce4-appfinder/slack-desc
new file mode 100644
index 00000000..ef06f705
--- /dev/null
+++ b/source/xfce/xfce4-appfinder/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-appfinder: xfce4-appfinder (Application finder)
+xfce4-appfinder:
+xfce4-appfinder: The Xfce application finder is a tool to find and launch installed
+xfce4-appfinder: applications on your system and execute commands.  It can also be used
+xfce4-appfinder: to quickly add launchers to the Xfce Panel by dragging an item from
+xfce4-appfinder: the view and dropping it on the panel.
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
diff --git a/source/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild b/source/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
new file mode 100755
index 00000000..dffff689
--- /dev/null
+++ b/source/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-appfinder
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-clipman-plugin/doinst.sh b/source/xfce/xfce4-clipman-plugin/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/source/xfce/xfce4-clipman-plugin/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/xfce/xfce4-clipman-plugin/slack-desc b/source/xfce/xfce4-clipman-plugin/slack-desc
new file mode 100644
index 00000000..def91845
--- /dev/null
+++ b/source/xfce/xfce4-clipman-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-clipman-plugin: xfce4-clipman-plugin (clipman plugin for the Xfce panel)
+xfce4-clipman-plugin:
+xfce4-clipman-plugin: Clipman allows you to keep several clipboard selections in memory
+xfce4-clipman-plugin: which you can then use to toggle.  It can pull the clips from both
+xfce4-clipman-plugin: the selection and the copy buffer, restore your clipboard on login,
+xfce4-clipman-plugin: and prevent an empty clipboard.
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
diff --git a/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild b/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
new file mode 100755
index 00000000..813c32d9
--- /dev/null
+++ b/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-clipman-plugin
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+#  Redistributions of this script must retain the above copyright
+#  notice, this list of conditions, and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-clipman-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url b/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
new file mode 100644
index 00000000..73b59ab1
--- /dev/null
+++ b/source/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-clipman-plugin/
diff --git a/source/xfce/xfce4-dev-tools/slack-desc b/source/xfce/xfce4-dev-tools/slack-desc
new file mode 100644
index 00000000..a5d0a4df
--- /dev/null
+++ b/source/xfce/xfce4-dev-tools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-dev-tools: xfce4-dev-tools (Xfce development tools)
+xfce4-dev-tools:
+xfce4-dev-tools: The Xfce development tools are a collection of tools and macros for
+xfce4-dev-tools: Xfce developers and people that want to build Xfce from Git.
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
diff --git a/source/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild b/source/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
new file mode 100755
index 00000000..0924180e
--- /dev/null
+++ b/source/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-dev-tools
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-mixer/doinst.sh b/source/xfce/xfce4-mixer/doinst.sh
new file mode 100644
index 00000000..9830478e
--- /dev/null
+++ b/source/xfce/xfce4-mixer/doinst.sh
@@ -0,0 +1,14 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x /usr/bin/update-mime-database ]; then
+  /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/xfce/xfce4-mixer/slack-desc b/source/xfce/xfce4-mixer/slack-desc
new file mode 100644
index 00000000..72741874
--- /dev/null
+++ b/source/xfce/xfce4-mixer/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xfce4-mixer: xfce4-mixer (Sound mixer applet for Xfce)
+xfce4-mixer:
+xfce4-mixer: The xfce4-mixer package contains a volume control application based 
+xfce4-mixer: on GStreamer written to conceptually fit into the Xfce desktop 
+xfce4-mixer: environment.  It also contains a plugin for the Xfce panel which is 
+xfce4-mixer: especially designed for use with the mouse wheel.
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
diff --git a/source/xfce/xfce4-mixer/xfce4-mixer.SlackBuild b/source/xfce/xfce4-mixer/xfce4-mixer.SlackBuild
new file mode 100755
index 00000000..4787144b
--- /dev/null
+++ b/source/xfce/xfce4-mixer/xfce4-mixer.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-mixer
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-mixer
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* THANKS TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xap/xfce4-notifyd/doinst.sh b/source/xfce/xfce4-notifyd/doinst.sh
index ec1b3d8a..ec1b3d8a 100644
--- a/source/xap/xfce4-notifyd/doinst.sh
+++ b/source/xfce/xfce4-notifyd/doinst.sh
diff --git a/source/xap/xfce4-notifyd/slack-desc b/source/xfce/xfce4-notifyd/slack-desc
index 1463db0b..1463db0b 100644
--- a/source/xap/xfce4-notifyd/slack-desc
+++ b/source/xfce/xfce4-notifyd/slack-desc
diff --git a/source/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild b/source/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
new file mode 100755
index 00000000..1a793217
--- /dev/null
+++ b/source/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
@@ -0,0 +1,121 @@
+#!/bin/sh
+
+# Slackware build script for Xfce4-notifyd
+
+# Copyright 2008  Frank Caraballo <fecaraballo{at}gmail{dot}com>
+# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-notifyd
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install-strip DESTDIR=$PKG || exit 1
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/xfce/xfce4-panel/slack-desc b/source/xfce/xfce4-panel/slack-desc
new file mode 100644
index 00000000..0711bf8b
--- /dev/null
+++ b/source/xfce/xfce4-panel/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xfce4-panel: xfce4-panel (panel for Xfce)
+xfce4-panel:
+xfce4-panel: The Xfce panel is part of the Xfce Desktop Environment and features
+xfce4-panel: program launchers, panel menus, a clock, a desktop switcher, and more.
+xfce4-panel: Many aspects of the panel can be configured through graphical dialogs,
+xfce4-panel: but also by GTK+ style properties and Xfconf settings.
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
diff --git a/source/xfce/xfce4-panel/xfce4-panel.SlackBuild b/source/xfce/xfce4-panel/xfce4-panel.SlackBuild
new file mode 100755
index 00000000..425cc3d3
--- /dev/null
+++ b/source/xfce/xfce4-panel/xfce4-panel.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-panel
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-power-manager/doinst.sh b/source/xfce/xfce4-power-manager/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/source/xfce/xfce4-power-manager/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/xfce/xfce4-power-manager/slack-desc b/source/xfce/xfce4-power-manager/slack-desc
new file mode 100644
index 00000000..8c79d3d7
--- /dev/null
+++ b/source/xfce/xfce4-power-manager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------|
+xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
+xfce4-power-manager:
+xfce4-power-manager: xfce4-power-manager makes power management functions (such as
+xfce4-power-manager: suspend and hibernate) easy inside the Xfce Desktop Environment.
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
diff --git a/source/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild b/source/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
new file mode 100755
index 00000000..37229cd8
--- /dev/null
+++ b/source/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
@@ -0,0 +1,129 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-power-manager
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-power-manager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --enable-network-manager \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+( cd $PKG/usr/doc/$PKGNAM-$VERSION/html
+  ln -s /usr/share/xfce4/doc/C/xfce4-power-manager.html index.html
+  ln -s /usr/share/xfce4/doc/C/images .
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/xfce/xfce4-screenshooter/doinst.sh b/source/xfce/xfce4-screenshooter/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/source/xfce/xfce4-screenshooter/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/source/xfce/xfce4-screenshooter/slack-desc b/source/xfce/xfce4-screenshooter/slack-desc
new file mode 100644
index 00000000..83eeaf7b
--- /dev/null
+++ b/source/xfce/xfce4-screenshooter/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------------|
+xfce4-screenshooter: xfce4-screenshooter (screenshooter plugin for Xfce)
+xfce4-screenshooter:
+xfce4-screenshooter: The screenshooter plugin adds a panel button that allows you to take
+xfce4-screenshooter: screenshots.
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
diff --git a/source/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild b/source/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
new file mode 100755
index 00000000..791a78f0
--- /dev/null
+++ b/source/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
@@ -0,0 +1,130 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-screenshooter
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-screenshooter
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+if [ -d $PKG/usr/share/doc/xfce4-screenshooter ]; then # --docdir was ignored
+  mv $PKG/usr/share/doc/xfce4-screenshooter/* $PKG/usr/doc/$PKGNAM-$VERSION
+  ( cd $PKG/usr/share ; rmdir -p doc/xfce4-screenshooter )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-screenshooter/xfce4-screenshooter.url b/source/xfce/xfce4-screenshooter/xfce4-screenshooter.url
new file mode 100644
index 00000000..48b2447e
--- /dev/null
+++ b/source/xfce/xfce4-screenshooter/xfce4-screenshooter.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-screenshooter/
diff --git a/source/xfce/xfce4-session/slack-desc b/source/xfce/xfce4-session/slack-desc
new file mode 100644
index 00000000..235feb30
--- /dev/null
+++ b/source/xfce/xfce4-session/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-session: xfce4-session (Xfce session manager)
+xfce4-session:
+xfce4-session: Xfce4-session is a session manager for Xfce.  Its task is to save the
+xfce4-session: state of your desktop (opened applications and their location) and
+xfce4-session: restore it during a next startup.  You can create several different
+xfce4-session: sessions and choose one of them on startup.
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
diff --git a/source/xfce/xfce4-session/xfce4-session.SlackBuild b/source/xfce/xfce4-session/xfce4-session.SlackBuild
new file mode 100755
index 00000000..081a1378
--- /dev/null
+++ b/source/xfce/xfce4-session/xfce4-session.SlackBuild
@@ -0,0 +1,138 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-session
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/patches/load_systemwide_Xmodmap_file.diff.gz | patch -p1 || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-libgnome-keyring \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-settings/slack-desc b/source/xfce/xfce4-settings/slack-desc
new file mode 100644
index 00000000..590a3b3e
--- /dev/null
+++ b/source/xfce/xfce4-settings/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xfce4-settings: xfce4-settings (Xfce settings manager)
+xfce4-settings:
+xfce4-settings: xfce4-settings is the Xfce settings manager front-end.  It comes with
+xfce4-settings: several different components for configuring application-independent
+xfce4-settings: settings inside xfconf.
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
diff --git a/source/xfce/xfce4-settings/xfce4-settings.SlackBuild b/source/xfce/xfce4-settings/xfce4-settings.SlackBuild
new file mode 100755
index 00000000..6e400455
--- /dev/null
+++ b/source/xfce/xfce4-settings/xfce4-settings.SlackBuild
@@ -0,0 +1,140 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-settings
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+zcat $CWD/xfce4-settings.theme.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/xfce4-settings.xft.defaults.diff.gz | patch -p1 --verbose || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-pluggable-dialogs \
+  --enable-sound-settings \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-settings/xfce4-settings.theme.diff b/source/xfce/xfce4-settings/xfce4-settings.theme.diff
new file mode 100644
index 00000000..ebdcf88f
--- /dev/null
+++ b/source/xfce/xfce4-settings/xfce4-settings.theme.diff
@@ -0,0 +1,12 @@
+diff -Nur xfce4-settings-4.10.0.orig/xfsettingsd/xsettings.xml xfce4-settings-4.10.0/xfsettingsd/xsettings.xml
+--- xfce4-settings-4.10.0.orig/xfsettingsd/xsettings.xml	2012-04-28 15:48:30.000000000 -0500
++++ xfce4-settings-4.10.0/xfsettingsd/xsettings.xml	2012-05-02 10:16:35.422408879 -0500
+@@ -7,7 +7,7 @@
+ <channel name="xsettings" version="1.0">
+   <property name="Net" type="empty">
+     <property name="ThemeName" type="empty"/>
+-    <property name="IconThemeName" type="empty"/>
++    <property name="IconThemeName" type="string" value="gnome"/>
+     <property name="DoubleClickTime" type="int" value="250"/>
+     <property name="DoubleClickDistance" type="int" value="5"/>
+     <property name="DndDragThreshold" type="int" value="8"/>
diff --git a/source/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff b/source/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff
new file mode 100644
index 00000000..333b615d
--- /dev/null
+++ b/source/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff
@@ -0,0 +1,23 @@
+--- ./xfsettingsd/xsettings.xml.orig	2012-04-28 15:48:30.000000000 -0500
++++ ./xfsettingsd/xsettings.xml	2012-07-19 14:32:25.554643922 -0500
+@@ -17,14 +17,19 @@
+     <property name="EnableEventSounds" type="bool" value="false"/>
+     <property name="EnableInputFeedbackSounds" type="bool" value="false"/>
+   </property>
++<!--
++  Commented out.  We should not modify the system text rendering defaults.
++  At least not by default.  :-)
++  Feel free to uncomment this block and modify it to suit your own needs.
+   <property name="Xft" type="empty">
+     <property name="DPI" type="empty"/>
+     <property name="Antialias" type="int" value="-1"/>
+     <property name="Hinting" type="int" value="-1"/>
+     <property name="HintStyle" type="string" value="hintnone"/>
+     <property name="RGBA" type="string" value="none"/>
+-    <!-- <property name="Lcdfilter" type="string" value="none"/> -->
++    <property name="Lcdfilter" type="string" value="none"/>
+   </property>
++-->
+   <property name="Gtk" type="empty">
+     <property name="CanChangeAccels" type="bool" value="false"/>
+     <property name="ColorPalette" type="string" value="black:white:gray50:red:purple:blue:light blue:green:yellow:orange:lavender:brown:goldenrod4:dodger blue:pink:light green:gray10:gray30:gray75:gray90"/>
diff --git a/source/xfce/xfce4-systemload-plugin/slack-desc b/source/xfce/xfce4-systemload-plugin/slack-desc
new file mode 100644
index 00000000..e83e9306
--- /dev/null
+++ b/source/xfce/xfce4-systemload-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                       |-----handy-ruler------------------------------------------------------|
+xfce4-systemload-plugin: xfce4-systemload-plugin (systemload plugin for the Xfce panel)
+xfce4-systemload-plugin:
+xfce4-systemload-plugin: This plugin displays the current system load on the Xfce panel.
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
diff --git a/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild b/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
new file mode 100755
index 00000000..dbe0343e
--- /dev/null
+++ b/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-systemload-plugin
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Maintained by Ozan Turkyilmaz ozan.turkyilmaz@gmail.com
+
+PKGNAM=xfce4-systemload-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url b/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
new file mode 100644
index 00000000..17d17c5a
--- /dev/null
+++ b/source/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-systemload-plugin/
diff --git a/source/xfce/xfce4-taskmanager/doinst.sh b/source/xfce/xfce4-taskmanager/doinst.sh
new file mode 100644
index 00000000..4e8ba707
--- /dev/null
+++ b/source/xfce/xfce4-taskmanager/doinst.sh
@@ -0,0 +1,4 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/source/xfce/xfce4-taskmanager/slack-desc b/source/xfce/xfce4-taskmanager/slack-desc
new file mode 100644
index 00000000..f4e05a13
--- /dev/null
+++ b/source/xfce/xfce4-taskmanager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+xfce4-taskmanager: xfce4-taskmanager (running apps / task manager application)
+xfce4-taskmanager:
+xfce4-taskmanager: xfce4-taskmanager shows a list of running apps (similar to the
+xfce4-taskmanager: task manager included with some other operating systems)  :)
+xfce4-taskmanager:
+xfce4-taskmanager: The taskmanager is started by running the command 'xfce4-taskmanager'
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
diff --git a/source/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild b/source/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
new file mode 100755
index 00000000..df702f0f
--- /dev/null
+++ b/source/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
@@ -0,0 +1,105 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-taskmanager
+
+# Copyright 2006-2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-taskmanager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-taskmanager/xfce4-taskmanager.url b/source/xfce/xfce4-taskmanager/xfce4-taskmanager.url
new file mode 100644
index 00000000..7cefa665
--- /dev/null
+++ b/source/xfce/xfce4-taskmanager/xfce4-taskmanager.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-taskmanager
diff --git a/source/xfce/xfce4-volumed/slack-desc b/source/xfce/xfce4-volumed/slack-desc
new file mode 100644
index 00000000..e9266cbc
--- /dev/null
+++ b/source/xfce/xfce4-volumed/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-volumed: xfce4-volumed (audio volume management daemon)
+xfce4-volumed:
+xfce4-volumed: This daemon is responsible for making the volume up/down and mute 
+xfce4-volumed: keys of the keyboard work automatically, and uses the XFCE mixer's 
+xfce4-volumed: defined card and track for choosing which track to act on. 
+xfce4-volumed:
+xfce4-volumed: It also provides volume change and mute toggle notifications if 
+xfce4-volumed: a notification daemon is running (using libnotify).
+xfce4-volumed:
+xfce4-volumed: Homepage: https://launchpad.net/xfce4-volumed
+xfce4-volumed:
diff --git a/source/xfce/xfce4-volumed/xfce4-volumed.SlackBuild b/source/xfce/xfce4-volumed/xfce4-volumed.SlackBuild
new file mode 100755
index 00000000..147716ea
--- /dev/null
+++ b/source/xfce/xfce4-volumed/xfce4-volumed.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-volumed
+
+# Copyright 2006-2011  Robby Workman  Northport, Alabama, USA
+# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-volumed
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-weather-plugin/slack-desc b/source/xfce/xfce4-weather-plugin/slack-desc
new file mode 100644
index 00000000..7d9b0675
--- /dev/null
+++ b/source/xfce/xfce4-weather-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-weather-plugin: xfce4-weather-plugin (weather plugin for the Xfce panel)
+xfce4-weather-plugin:
+xfce4-weather-plugin: The weather plugin displays current weather conditions and forecasts.
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
diff --git a/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild b/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
new file mode 100755
index 00000000..d2d290b5
--- /dev/null
+++ b/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-weather-plugin
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-weather-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url b/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
new file mode 100644
index 00000000..9ee0ef01
--- /dev/null
+++ b/source/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-weather-plugin/
diff --git a/source/xfce/xfconf/slack-desc b/source/xfce/xfconf/slack-desc
new file mode 100644
index 00000000..a48abb4b
--- /dev/null
+++ b/source/xfce/xfconf/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+xfconf: xfconf (Xfce configuration storage system)
+xfconf:
+xfconf: A daemon and query system for managing the storage and retrieval of
+xfconf: settings for the Xfce Desktop Environment, both graphically as well as
+xfconf: from the command line.
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
diff --git a/source/xfce/xfconf/xfconf.SlackBuild b/source/xfce/xfconf/xfconf.SlackBuild
new file mode 100755
index 00000000..af252f62
--- /dev/null
+++ b/source/xfce/xfconf/xfconf.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfconf
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfdesktop/slack-desc b/source/xfce/xfdesktop/slack-desc
new file mode 100644
index 00000000..e98b02b8
--- /dev/null
+++ b/source/xfce/xfdesktop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+xfdesktop: xfdesktop (Xfce desktop manager)
+xfdesktop:
+xfdesktop: Xfdesktop is a desktop manager for the Xfce Desktop Environment.
+xfdesktop: Desktop in this respect means the root window.  The manager handles
+xfdesktop: tasks such as the background image and color, the root menu and window
+xfdesktop: list, minimized application icons, and file icons on the desktop.
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
diff --git a/source/xfce/xfdesktop/xfdesktop.SlackBuild b/source/xfce/xfdesktop/xfdesktop.SlackBuild
new file mode 100755
index 00000000..15c6e575
--- /dev/null
+++ b/source/xfce/xfdesktop/xfdesktop.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfdesktop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfwm4-themes/slack-desc b/source/xfce/xfwm4-themes/slack-desc
new file mode 100644
index 00000000..dca6ee94
--- /dev/null
+++ b/source/xfce/xfwm4-themes/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+xfwm4-themes: xfwm4-themes (themes for the Xfce window manager)
+xfwm4-themes:
+xfwm4-themes: This package contains a wide variety of themes for xfwm4, the window
+xfwm4-themes: manager of the Xfce4 project.  If the default theme is not to your
+xfwm4-themes: liking, you'll probably find the eyecandy you're looking for here.
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
diff --git a/source/xfce/xfwm4-themes/xfwm4-themes.SlackBuild b/source/xfce/xfwm4-themes/xfwm4-themes.SlackBuild
new file mode 100755
index 00000000..90748d0e
--- /dev/null
+++ b/source/xfce/xfwm4-themes/xfwm4-themes.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfwm4-themes
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfwm4/slack-desc b/source/xfce/xfwm4/slack-desc
new file mode 100644
index 00000000..89db3f57
--- /dev/null
+++ b/source/xfce/xfwm4/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+xfwm4: xfwm4 (Xfce Window Manager)
+xfwm4:
+xfwm4: This package contains xfwm4 which is the window manager for Xfce4.
+xfwm4: It is designed to run with the rest of Xfce, but it also makes a
+xfwm4: capable window manager for any X11 environment.
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
diff --git a/source/xfce/xfwm4/xfwm4.SlackBuild b/source/xfce/xfwm4/xfwm4.SlackBuild
new file mode 100755
index 00000000..7855b84e
--- /dev/null
+++ b/source/xfce/xfwm4/xfwm4.SlackBuild
@@ -0,0 +1,139 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfwm4
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/X11/xinit
+cat $CWD/xinitrc.xfce > $PKG/etc/X11/xinit/xinitrc.xfce
+chmod 0755 $PKG/etc/X11/xinit/*
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/xfce/xfwm4/xinitrc.xfce b/source/xfce/xfwm4/xinitrc.xfce
new file mode 100644
index 00000000..82c0dd40
--- /dev/null
+++ b/source/xfce/xfwm4/xinitrc.xfce
@@ -0,0 +1,40 @@
+#!/bin/sh
+#  xinitrc.xfce - modified to work around xfce4session bug
+#                 https://bugzilla.xfce.org/show_bug.cgi?id=8841
+
+
+########################################################################
+##  Merge in defaults and keymaps                                     ##
+########################################################################
+
+userresources=$HOME/.Xresources
+usermodmap=$HOME/.Xmodmap
+sysresources=/etc/X11/xinit/.Xresources
+sysmodmap=/etc/X11/xinit/.Xmodmap
+
+if [ -f $sysresources ]; then
+    /usr/bin/xrdb -merge $sysresources
+fi
+
+if [ -f $sysmodmap ]; then
+    /usr/bin/xmodmap $sysmodmap
+fi
+
+if [ -f $userresources ]; then
+    /usr/bin/xrdb -merge $userresources
+fi
+
+if [ -f $usermodmap ]; then
+    /usr/bin/xmodmap $usermodmap
+fi
+
+########################################################################
+##  Start xfce Desktop Environment                                    ##
+########################################################################
+
+if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
+  exec ck-launch-session dbus-launch --exit-with-session /usr/bin/startxfce4
+else
+  exec dbus-launch --exit-with-session /usr/bin/startxfce4
+fi
+
diff --git a/source/y/bsd-games/bsd-games.SlackBuild b/source/y/bsd-games/bsd-games.SlackBuild
index 4fb99671..63f4b452 100755
--- a/source/y/bsd-games/bsd-games.SlackBuild
+++ b/source/y/bsd-games/bsd-games.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,7 +22,7 @@
 
 
 VERSION=${VERSION:-2.13}
-BUILD=${BUILD:-11}
+BUILD=${BUILD:-12}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -56,6 +56,11 @@ zcat $CWD/bsd-games.trek-gcc4.diff.gz | patch -p1 --backup --suffix=.orig || exi
 zcat $CWD/bsd-games.phantasia_install_fix.diff.gz | patch -p1 --backup --suffix=.orig || exit 1
 zcat $CWD/bsd-games.getline.diff.gz | patch -p1 --backup --suffix=.orig || exit 1
 
+# Fix typos in the quote database:
+for typofix in $CWD/fortune-fixes-sorry-no-additions-accepted-here/* ; do
+  zcat $typofix | patch -p1 --verbose || exit 1
+done
+
 ## Without the old default (with, of course, a command line switch), and an updated
 ## man page, even though PJV wrote this, it just doesn't make the cut.  I hope it's
 ## still of use to somebody though.  It increases the accuracy of pom by two orders
diff --git a/source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here/20120302.diff b/source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here/20120302.diff
new file mode 100644
index 00000000..94710bca
--- /dev/null
+++ b/source/y/bsd-games/fortune-fixes-sorry-no-additions-accepted-here/20120302.diff
@@ -0,0 +1,11 @@
+--- ./fortune/datfiles/fortunes2.orig	2001-08-29 10:11:30.000000000 -0500
++++ ./fortune/datfiles/fortunes2	2012-03-02 10:00:47.753999471 -0600
+@@ -35689,7 +35689,7 @@
+ order to get power we would have to become very much like them.  (Lenin's
+ fatal mistake, both in theory and in practice.)
+ %
+-Perhaps the world's second words crime is boredom.  The first is
++Perhaps the world's second worst crime is boredom.  The first is
+ being a bore.
+ 		-- Cecil Beaton
+ %
diff --git a/testing/packages/README b/testing/packages/README
new file mode 100644
index 00000000..ff614749
--- /dev/null
+++ b/testing/packages/README
@@ -0,0 +1,2 @@
+The alternate xf86-video-* packages in this directory require the
+libdrm-2.4.39 package, so be sure to upgrade that before testing them.
diff --git a/testing/packages/config-testing-3.4.11 b/testing/packages/config-testing-3.4.11
new file mode 120000
index 00000000..cd6ee53d
--- /dev/null
+++ b/testing/packages/config-testing-3.4.11
@@ -0,0 +1 @@
+../source/config-testing-3.4.11
\ No newline at end of file
diff --git a/testing/packages/config-testing-3.5.4 b/testing/packages/config-testing-3.5.4
new file mode 120000
index 00000000..b6097db5
--- /dev/null
+++ b/testing/packages/config-testing-3.5.4
@@ -0,0 +1 @@
+../source/config-testing-3.5.4
\ No newline at end of file
diff --git a/testing/packages/config-testing-3.6-rc4 b/testing/packages/config-testing-3.6-rc4
new file mode 120000
index 00000000..58732036
--- /dev/null
+++ b/testing/packages/config-testing-3.6-rc4
@@ -0,0 +1 @@
+../source/config-testing-3.6-rc4
\ No newline at end of file
diff --git a/testing/source/config-testing-3.4.11/README b/testing/source/config-testing-3.4.11/README
new file mode 100644
index 00000000..381a6aa6
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/README
@@ -0,0 +1,8 @@
+Here are some kernel configs that may be helpful for compiling a 3.4.x
+Linux kernel.  The 3.4.x series was tested here, but there's a problem
+where on about 10% of the boots on my machine, clocksource hpet will be
+selected instead of clocksource tsc, and the kernel will oops.  However,
+passing clocksource=hpet at boot works fine.
+
+It seems safer to stick to the 3.2.x series for release...
+
diff --git a/testing/source/config-testing-3.4.11/config-generic-3.4.11 b/testing/source/config-testing-3.4.11/config-generic-3.4.11
new file mode 100644
index 00000000..3961c5ca
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-generic-3.4.11
@@ -0,0 +1,5836 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.4.11 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.4.11/config-generic-3.4.11.x64 b/testing/source/config-testing-3.4.11/config-generic-3.4.11.x64
new file mode 100644
index 00000000..d4fdb763
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-generic-3.4.11.x64
@@ -0,0 +1,5626 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.4.11 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_ABYSS=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.4.11/config-generic-smp-3.4.11-smp b/testing/source/config-testing-3.4.11/config-generic-smp-3.4.11-smp
new file mode 100644
index 00000000..09f1bfc9
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-generic-smp-3.4.11-smp
@@ -0,0 +1,5865 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.4.11 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_BOOTMEM=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.4.11/config-huge-3.4.11 b/testing/source/config-testing-3.4.11/config-huge-3.4.11
new file mode 100644
index 00000000..596661e0
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-huge-3.4.11
@@ -0,0 +1,5835 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.4.11 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.4.11/config-huge-3.4.11.x64 b/testing/source/config-testing-3.4.11/config-huge-3.4.11.x64
new file mode 100644
index 00000000..dd2f85e3
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-huge-3.4.11.x64
@@ -0,0 +1,5625 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.4.11 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_ABYSS=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.4.11/config-huge-smp-3.4.11-smp b/testing/source/config-testing-3.4.11/config-huge-smp-3.4.11-smp
new file mode 100644
index 00000000..30b05f91
--- /dev/null
+++ b/testing/source/config-testing-3.4.11/config-huge-smp-3.4.11-smp
@@ -0,0 +1,5864 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.4.11 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_KTIME_SCALAR=y
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_BOOTMEM=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_CLEANCACHE is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_STMMAC_PCI=m
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_TR=y
+CONFIG_WANT_LLC=y
+CONFIG_PCMCIA_IBMTR=m
+CONFIG_IBMTR=m
+CONFIG_IBMOL=m
+CONFIG_IBMLS=m
+CONFIG_3C359=m
+CONFIG_TMS380TR=m
+CONFIG_TMSPCI=m
+CONFIG_SKISA=m
+CONFIG_PROTEON=m
+CONFIG_ABYSS=m
+CONFIG_SMCTR=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_RAMOOPS=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_WM8400=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_WM8400=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=y
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WACOM_POWER_SUPPLY=y
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_USB_SERIAL_QUATECH_USB2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+# CONFIG_VME_BUS is not set
+CONFIG_DX_SEP=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_INTEL_MEI=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
diff --git a/testing/source/config-testing-3.5.4/config-generic-3.5.4 b/testing/source/config-testing-3.5.4/config-generic-3.5.4
new file mode 100644
index 00000000..172a8390
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-generic-3.5.4
@@ -0,0 +1,5935 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.5.4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.5.4/config-generic-3.5.4.x64 b/testing/source/config-testing-3.5.4/config-generic-3.5.4.x64
new file mode 100644
index 00000000..4cecb7be
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-generic-3.5.4.x64
@@ -0,0 +1,5731 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.5.4 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.5.4/config-generic-smp-3.5.4-smp b/testing/source/config-testing-3.5.4/config-generic-smp-3.5.4-smp
new file mode 100644
index 00000000..3b91b9a2
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-generic-smp-3.5.4-smp
@@ -0,0 +1,5964 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.5.4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.5.4/config-huge-3.5.4 b/testing/source/config-testing-3.5.4/config-huge-3.5.4
new file mode 100644
index 00000000..8056bea8
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-huge-3.5.4
@@ -0,0 +1,5934 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.5.4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.5.4/config-huge-3.5.4.x64 b/testing/source/config-testing-3.5.4/config-huge-3.5.4.x64
new file mode 100644
index 00000000..5fc846bd
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-huge-3.5.4.x64
@@ -0,0 +1,5730 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.5.4 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.5.4/config-huge-smp-3.5.4-smp b/testing/source/config-testing-3.5.4/config-huge-smp-3.5.4-smp
new file mode 100644
index 00000000..24337d18
--- /dev/null
+++ b/testing/source/config-testing-3.5.4/config-huge-smp-3.5.4-smp
@@ -0,0 +1,5963 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.5.4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
+# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+# CONFIG_DM_DEBUG_SPACE_MAPS is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWM=m
+# CONFIG_IWM_DEBUG is not set
+# CONFIG_IWM_TRACING is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+# CONFIG_WIMAX_IWMC3200_SDIO is not set
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VIDEO_AU0828=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_HD29L2=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4 b/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4
new file mode 100644
index 00000000..a3f529e7
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4
@@ -0,0 +1,5987 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.6.0-rc4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4.x64 b/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4.x64
new file mode 100644
index 00000000..ddbf353b
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-generic-3.6-rc4.x64
@@ -0,0 +1,5787 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.6.0-rc4 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
+CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-generic-smp-3.6-rc4-smp b/testing/source/config-testing-3.6-rc4/config-generic-smp-3.6-rc4-smp
new file mode 100644
index 00000000..3202326c
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-generic-smp-3.6-rc4-smp
@@ -0,0 +1,6016 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.6.0-rc4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_7000FASST=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_DTC3280=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=m
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_T128=m
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4 b/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4
new file mode 100644
index 00000000..0cb61319
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4
@@ -0,0 +1,5986 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.6.0-rc4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_SMP is not set
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=1
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+# CONFIG_OLPC is not set
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_DMASCC is not set
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+# CONFIG_ISDN_DRV_LOOP is not set
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4.x64 b/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4.x64
new file mode 100644
index 00000000..5a42b95c
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-huge-3.6-rc4.x64
@@ -0,0 +1,5786 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.6.0-rc4 Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+CONFIG_I7300_IDLE_IOAT_CHANNEL=y
+CONFIG_I7300_IDLE=m
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_AMD_IOMMU is not set
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAMELLIA_X86_64=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
+CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_X86_64=y
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
+CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/config-testing-3.6-rc4/config-huge-smp-3.6-rc4-smp b/testing/source/config-testing-3.6-rc4/config-huge-smp-3.6-rc4-smp
new file mode 100644
index 00000000..16a1e18e
--- /dev/null
+++ b/testing/source/config-testing-3.6-rc4/config-huge-smp-3.6-rc4-smp
@@ -0,0 +1,6015 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/i386 3.6.0-rc4 Kernel Configuration
+#
+# CONFIG_64BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="darkstar"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_MEMCG is not set
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_THROTTLING=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_32_IRIS=m
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMTEST=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MELAN is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_ANCIENT_MCE=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_VM86=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_NOHIGHMEM is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=3
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_HIGHPTE=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MATH_EMULATION=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="\"\""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_NUMA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+CONFIG_SFI=y
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K6=m
+CONFIG_X86_POWERNOW_K7=m
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_GX_SUSPMOD=m
+CONFIG_X86_SPEEDSTEP_CENTRINO=m
+CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
+CONFIG_X86_SPEEDSTEP_ICH=m
+CONFIG_X86_SPEEDSTEP_SMI=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_CPUFREQ_NFORCE2=m
+CONFIG_X86_LONGRUN=m
+CONFIG_X86_LONGHAUL=m
+CONFIG_X86_E_POWERSAVER=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=m
+CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_ALIX=y
+# CONFIG_NET5501 is not set
+# CONFIG_GEOS is not set
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_LTPC=m
+CONFIG_COPS=m
+CONFIG_COPS_DAYNA=y
+CONFIG_COPS_TANGENT=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_BLA=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_SCC=m
+CONFIG_SCC_DELAY=y
+CONFIG_SCC_TRXECHO=y
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_PCH_CAN=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_TSCAN1=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+CONFIG_RXKAD=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+# CONFIG_NFC_SHDLC is not set
+# CONFIG_NFC_LLCP is not set
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_PN544_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_WILINK=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_CMA is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_CS553X=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_ONENAND_SIM=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_XD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_DA=y
+CONFIG_BLK_CPQ_CISS_DA=y
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=y
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_INTEL_MID_PTI=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_PCH_PHUB=m
+CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
+CONFIG_SCSI_HPSA=y
+CONFIG_SCSI_3W_9XXX=y
+CONFIG_SCSI_3W_SAS=y
+CONFIG_SCSI_7000FASST=y
+CONFIG_SCSI_ACARD=y
+CONFIG_SCSI_AHA152X=y
+CONFIG_SCSI_AHA1542=y
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=y
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=y
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=y
+CONFIG_SCSI_IN2000=y
+CONFIG_SCSI_ARCMSR=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_HPTIOP=y
+CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=y
+CONFIG_LIBFCOE=y
+CONFIG_FCOE=y
+CONFIG_FCOE_FNIC=y
+CONFIG_SCSI_DMX3191D=y
+CONFIG_SCSI_DTC3280=y
+CONFIG_SCSI_EATA=y
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=y
+CONFIG_SCSI_GDTH=y
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_GENERIC_NCR5380=m
+CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
+CONFIG_SCSI_GENERIC_NCR53C400=y
+CONFIG_SCSI_IPS=y
+CONFIG_SCSI_INITIO=y
+CONFIG_SCSI_INIA100=y
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_NCR53C406A=m
+CONFIG_SCSI_STEX=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_PAS16=m
+CONFIG_SCSI_QLOGIC_FAS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA_FC=y
+CONFIG_TCM_QLA2XXX=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=y
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_SYM53C416=y
+CONFIG_SCSI_DC395x=y
+CONFIG_SCSI_DC390T=y
+CONFIG_SCSI_T128=y
+CONFIG_SCSI_U14_34F=m
+# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
+# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
+CONFIG_SCSI_U14_34F_MAX_TAGS=8
+CONFIG_SCSI_ULTRASTOR=y
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=y
+CONFIG_SCSI_PM8001=y
+CONFIG_SCSI_SRP=y
+CONFIG_SCSI_BFA_FC=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_INIC162X=y
+CONFIG_SATA_ACARD_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_SX4=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_SVW=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARASAN_CF=m
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_ATP867X=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NINJA32=y
+CONFIG_PATA_NS87415=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_OPTIDMA=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RDC=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SCH=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=y
+CONFIG_PATA_ISAPNP=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_QDI=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_WINBOND_VLB=y
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LAN=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=y
+# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
+CONFIG_I2O_BUS=y
+CONFIG_I2O_BLOCK=y
+CONFIG_I2O_SCSI=y
+CONFIG_I2O_PROC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_MII=m
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKEHARD=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_ISA=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL3=m
+CONFIG_3C515=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_LANCE=m
+CONFIG_PCNET32=m
+CONFIG_DEPCA=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NI65=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_CALXEDA_XGMAC=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_CS89x0=m
+# CONFIG_CS89x0_PLATFORM is not set
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_EWRK3=m
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_AT1700=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_ETH16I=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGB_DCA=y
+# CONFIG_IGB_PTP is not set
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+# CONFIG_IXGBE_PTP is not set
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_APRICOT=m
+CONFIG_EEXPRESS=m
+CONFIG_EEXPRESS_PRO=m
+CONFIG_LP486E=m
+CONFIG_NI52=m
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_EL2=m
+CONFIG_AC3200=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_E2100=m
+CONFIG_HPLAN_PLUS=m
+CONFIG_HPLAN=m
+CONFIG_NE2000=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_ULTRA=m
+CONFIG_WD80x3=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+# CONFIG_PCH_PTP is not set
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_RACAL=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC9194=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+# CONFIG_ROADRUNNER_LARGE_RINGS is not set
+CONFIG_NET_SB1000=m
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_AMD_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_GPIO=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_WLAN=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AIRO=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_RATE_CONTROL=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_B43=m
+CONFIG_B43_SSB=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_SDIO_OOB is not set
+CONFIG_BRCMFMAC_USB=y
+# CONFIG_BRCMDBG is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+# CONFIG_IWLWIFI_P2P is not set
+# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_HERMES=m
+# CONFIG_HERMES_PRISM is not set
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_HOSTESS_SV11=m
+CONFIG_COSA=m
+CONFIG_LANMEDIA=m
+CONFIG_SEALEVEL_4021=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_N2=m
+CONFIG_C101=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+# CONFIG_DSCC4_PCISYNC is not set
+# CONFIG_DSCC4_PCI_RST is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_SDLA=m
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_SBNI=m
+# CONFIG_SBNI_MULTILINE is not set
+CONFIG_VMXNET3=m
+CONFIG_HYPERV_NET=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_0=y
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_AVM_A1=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_IX1MICROR2=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_ASUSCOM=y
+CONFIG_HISAX_TELEINT=y
+CONFIG_HISAX_HFCS=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_SPORTSTER=y
+CONFIG_HISAX_MIC=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_ISURF=y
+CONFIG_HISAX_HSTSAPHIR=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+
+#
+# Active cards
+#
+CONFIG_ISDN_DRV_ICN=m
+CONFIG_ISDN_DRV_PCBIT=m
+CONFIG_ISDN_DRV_SC=m
+CONFIG_ISDN_DRV_ACT2000=m
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_T1ISA=m
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+# CONFIG_GIGASET_CAPI is not set
+CONFIG_GIGASET_I4L=y
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_M101 is not set
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP4=m
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_INPORT=m
+CONFIG_MOUSE_ATIXL=y
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_WISTRON_BTNS=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_DEVKMEM=y
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=m
+CONFIG_SERIAL_8250_ACCENT=m
+CONFIG_SERIAL_8250_BOCA=m
+CONFIG_SERIAL_8250_EXAR_ST16C554=m
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MFD_HSU=m
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_TIMBERDALE=m
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_PCH_UART=m
+CONFIG_SERIAL_XILINX_PS_UART=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+CONFIG_APPLICOM=m
+CONFIG_SONYPI=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_NSC is not set
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_EG20T=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_STUB=m
+CONFIG_SCx200_I2C=m
+CONFIG_SCx200_I2C_SCL=12
+CONFIG_SCx200_I2C_SDA=13
+CONFIG_SCx200_ACB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_IT8761E=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_VX855=m
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+CONFIG_GPIO_CS5535=m
+CONFIG_GPIO_AMD8111=m
+# CONFIG_GPIO_LANGWELL is not set
+CONFIG_GPIO_PCH=m
+CONFIG_GPIO_ML_IOH=m
+# CONFIG_GPIO_TIMBERDALE is not set
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MCP23S08=m
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_UCB1400 is not set
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_TEST_POWER=m
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27X00_I2C=y
+CONFIG_BATTERY_BQ27X00_PLATFORM=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+# CONFIG_CHARGER_MANAGER is not set
+CONFIG_CHARGER_SMB347=m
+CONFIG_POWER_AVS=y
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MCP3021=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_MC13783_ADC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=m
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_GEODE_WDT=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_SBC7240_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_PASIC3=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TMIO is not set
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_MFD_MC13783=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_I2C=m
+# CONFIG_ABX500_CORE is not set
+CONFIG_MFD_CS5535=m
+CONFIG_MFD_TIMBERDALE=m
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+
+#
+# Media drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+CONFIG_LIRC=m
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGUANA=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7183=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TVP7002=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_ADV7343=m
+CONFIG_VIDEO_ADV7393=m
+CONFIG_VIDEO_AK881X=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_VS6624=m
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SR030PC30=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Miscelaneous helper chips
+#
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_V4L_USB_DRIVERS=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_SN9C102=m
+
+#
+# Webcam and/or TV USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_V4L_PCI_DRIVERS=y
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_V4L_ISA_PARPORT_DRIVERS=y
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_W9966=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_VIA_CAMERA=m
+CONFIG_VIDEO_TIMBERDALE=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_TIMBERDALE=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+CONFIG_V4L_RADIO_ISA_DRIVERS=y
+CONFIG_RADIO_ISA=m
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+# CONFIG_RADIO_RTRACK2 is not set
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_MIROPCM20=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_IT913X=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+CONFIG_SMS_USB_DRV=m
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+CONFIG_DVB_DM1105=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+
+#
+# Supported Earthsoft PT1 Adapters
+#
+CONFIG_DVB_PT1=m
+
+#
+# Supported Mantis Adapters
+#
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+
+#
+# Supported nGene Adapters
+#
+CONFIG_DVB_NGENE=m
+
+#
+# Supported ddbridge ('Octopus') Adapters
+#
+CONFIG_DVB_DDBRIDGE=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV6110x=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_IT913X_FE=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_USB=m
+CONFIG_DRM_KMS_HELPER=m
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_RADEON_KMS=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_NOUVEAU_DEBUG=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_STUB_POULSBO=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_HECUBA=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
+CONFIG_FB_CYBER2000=m
+CONFIG_FB_CYBER2000_DDC=y
+CONFIG_FB_ARC=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+CONFIG_FB_N411=m
+CONFIG_FB_HGA=m
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_I740=m
+CONFIG_FB_I810=m
+CONFIG_FB_I810_GTF=y
+CONFIG_FB_I810_I2C=y
+CONFIG_FB_LE80578=m
+CONFIG_FB_CARILLO_RANCH=m
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_S3_DDC=y
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+CONFIG_FB_SIS=m
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+CONFIG_FB_VIA=m
+# CONFIG_FB_VIA_DIRECT_PROCFS is not set
+CONFIG_FB_VIA_X_COMPATIBILITY=y
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_VT8623=m
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_ARK=m
+CONFIG_FB_PM3=m
+CONFIG_FB_CARMINE=m
+CONFIG_FB_CARMINE_DRAM_EVAL=y
+# CONFIG_CARMINE_DRAM_CUSTOM is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=m
+CONFIG_FB_GEODE_GX=m
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_TMIO=m
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_FB_SMSCUFX=m
+CONFIG_FB_UDL=m
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+CONFIG_FB_MB862XX_PCI_GDC=y
+CONFIG_FB_MB862XX_I2C=y
+CONFIG_FB_BROADSHEET=m
+CONFIG_FB_AUO_K190X=m
+CONFIG_FB_AUO_K1900=m
+CONFIG_FB_AUO_K1901=m
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_CARILLO_RANCH=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_OT200=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_MDA_CONSOLE=m
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_SUN8x16=y
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_KCTL_JACK=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_OPL4_LIB_SEQ=m
+CONFIG_SND_SBAWE_SEQ=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_WSS_LIB=m
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB8_DSP=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+CONFIG_SND_AD1816A=m
+CONFIG_SND_AD1848=m
+CONFIG_SND_ALS100=m
+CONFIG_SND_AZT1605=m
+CONFIG_SND_AZT2316=m
+CONFIG_SND_AZT2320=m
+CONFIG_SND_CMI8330=m
+CONFIG_SND_CS4231=m
+CONFIG_SND_CS4236=m
+CONFIG_SND_ES1688=m
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+CONFIG_SND_GUSCLASSIC=m
+CONFIG_SND_GUSEXTREME=m
+CONFIG_SND_GUSMAX=m
+CONFIG_SND_INTERWAVE=m
+CONFIG_SND_INTERWAVE_STB=m
+CONFIG_SND_JAZZ16=m
+CONFIG_SND_OPL3SA2=m
+CONFIG_SND_OPTI92X_AD1848=m
+CONFIG_SND_OPTI92X_CS4231=m
+CONFIG_SND_OPTI93X=m
+CONFIG_SND_MIRO=m
+CONFIG_SND_SB8=m
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+CONFIG_SND_SB16_CSP=y
+CONFIG_SND_SSCAPE=m
+CONFIG_SND_WAVEFRONT=m
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
+CONFIG_SND_TEA575X=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PREALLOC_SIZE=2048
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SIS7019=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_FIREWIRE_SPEAKERS=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO_TPKBD=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_SSB=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_NET48XX=m
+CONFIG_LEDS_WRAP=m
+CONFIG_LEDS_PCA9532=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_DELL_NETBOOKS=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM3556=m
+CONFIG_LEDS_OT200=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_INFINIBAND_CXGB3 is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PCF50633=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+# CONFIG_KS0108 is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO=m
+CONFIG_VFIO_PCI=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+# CONFIG_USBIP_DEBUG is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+CONFIG_ASUS_OLED=m
+# CONFIG_PANEL is not set
+CONFIG_R8187SE=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_RTS_PSTOR=m
+# CONFIG_RTS_PSTOR_DEBUG is not set
+CONFIG_RTS5139=m
+# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_TRANZPORT is not set
+CONFIG_IDE_PHISON=m
+CONFIG_LINE6_USB=m
+# CONFIG_LINE6_USB_DEBUG is not set
+# CONFIG_LINE6_USB_DUMP_CTRL is not set
+# CONFIG_LINE6_USB_DUMP_MIDI is not set
+# CONFIG_LINE6_USB_DUMP_PCM is not set
+# CONFIG_LINE6_USB_RAW is not set
+# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
+CONFIG_USB_SERIAL_QUATECH2=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+CONFIG_DX_SEP=m
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZSMALLOC=m
+CONFIG_WLAGS49_H2=m
+CONFIG_WLAGS49_H25=m
+CONFIG_FB_SM7XX=m
+CONFIG_CRYSTALHD=m
+# CONFIG_CXT1E1 is not set
+CONFIG_FB_XGI=m
+CONFIG_ACPI_QUICKSTART=m
+CONFIG_SBE_2T3E3=m
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=y
+CONFIG_SPEAKUP_SYNTH_ACNTSA=y
+CONFIG_SPEAKUP_SYNTH_ACNTPC=y
+CONFIG_SPEAKUP_SYNTH_APOLLO=y
+CONFIG_SPEAKUP_SYNTH_AUDPTR=y
+CONFIG_SPEAKUP_SYNTH_BNS=y
+CONFIG_SPEAKUP_SYNTH_DECTLK=y
+CONFIG_SPEAKUP_SYNTH_DECEXT=y
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DTLK=y
+CONFIG_SPEAKUP_SYNTH_KEYPC=y
+CONFIG_SPEAKUP_SYNTH_LTLK=y
+CONFIG_SPEAKUP_SYNTH_SOFT=y
+CONFIG_SPEAKUP_SYNTH_SPKOUT=y
+CONFIG_SPEAKUP_SYNTH_TXPRT=y
+CONFIG_SPEAKUP_SYNTH_DUMMY=y
+CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+CONFIG_DVB_CXD2099=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_DT3155_CCIR=y
+CONFIG_DT3155_STREAMING=y
+CONFIG_EASYCAP=m
+# CONFIG_EASYCAP_DEBUG is not set
+# CONFIG_VIDEO_GO7007 is not set
+CONFIG_SOLO6X10=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_PHONE=m
+CONFIG_PHONE_IXJ=m
+CONFIG_PHONE_IXJ_PCMCIA=m
+CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
+CONFIG_WIMAX_GDM72XX=m
+# CONFIG_WIMAX_GDM72XX_QOS is not set
+# CONFIG_WIMAX_GDM72XX_K_MODE is not set
+CONFIG_WIMAX_GDM72XX_WIMAX2=y
+CONFIG_WIMAX_GDM72XX_USB=y
+# CONFIG_WIMAX_GDM72XX_SDIO is not set
+# CONFIG_WIMAX_GDM72XX_USB_PM is not set
+CONFIG_CSR_WIFI=m
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ACPI_WMI=m
+CONFIG_MSI_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_IPS=m
+CONFIG_IBM_RTL=m
+CONFIG_XO15_EBOOK=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+CONFIG_VIRT_DRIVERS=y
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_EXTCON=m
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_MEMORY=y
+# CONFIG_IIO is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+CONFIG_EDD_OFF=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=m
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=y
+CONFIG_OCFS2_FS_O2CB=y
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_PROBE_EVENTS is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_NX_TEST is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_YAMA is not set
+# CONFIG_IMA is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_GLUE_HELPER_X86=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_BLOWFISH_COMMON=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_586=m
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_TWOFISH_586=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_APIC_ARCHITECTURE=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_VHOST_NET=m
+CONFIG_TCM_VHOST=m
+CONFIG_LGUEST=m
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=y
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_CRC8=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
diff --git a/testing/source/libdrm/libdrm.SlackBuild b/testing/source/libdrm/libdrm.SlackBuild
index 81d04f86..290282a5 100755
--- a/testing/source/libdrm/libdrm.SlackBuild
+++ b/testing/source/libdrm/libdrm.SlackBuild
@@ -74,8 +74,8 @@ CFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --enable-udev \
-  --enable-nouveau-experimental-api \
   --enable-vmwgfx-experimental-api \
+  --enable-omap-experimental-api \
   --build=$ARCH-slackware-linux
 
 # Build and install:
diff --git a/testing/source/linux-2.6.35.12-configs/config-generic-2.6.35.12 b/testing/source/linux-2.6.35.12-configs/config-generic-2.6.35.12
deleted file mode 100644
index 768077fa..00000000
--- a/testing/source/linux-2.6.35.12-configs/config-generic-2.6.35.12
+++ /dev/null
@@ -1,4922 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35.12
-# Fri Apr 22 13:03:08 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_HAVE_EARLY_RES=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_NO_BOOTMEM is not set
-CONFIG_MEMTEST=y
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW_64K=y
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=m
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-# CONFIG_PCIEASPM is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_K8_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_RPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_L2CAP_EXT_FEATURES=y
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-
-#
-# UBI - Unsorted block images
-#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_ISL29003=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_HPSA=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_3W_SAS=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=m
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_ARCMSR=m
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_BUSLOGIC=m
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=m
-CONFIG_LIBFCOE=m
-CONFIG_FCOE=m
-CONFIG_FCOE_FNIC=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=m
-CONFIG_SCSI_PM8001=m
-CONFIG_SCSI_SRP=m
-CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=y
-CONFIG_ASYNC_RAID6_TEST=m
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=y
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=m
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI_PCI=y
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT30XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WINBOND_CIR=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_PC8736x_GPIO=m
-CONFIG_NSC_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_HDAPS=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_IR_CORE=m
-CONFIG_VIDEO_IR=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_IMON=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-
-#
-# Supported FireWire (IEEE 1394) Adapters
-#
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-CONFIG_DVB_FIREDTV_IEEE1394=y
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3304=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-# CONFIG_FB_HGA_ACCEL is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_ATIHDMI=y
-CONFIG_SND_HDA_CODEC_NVHDMI=y
-CONFIG_SND_HDA_CODEC_INTELHDMI=y
-CONFIG_SND_HDA_ELD=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_HIFIER=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EGALAX=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_XHCI_HCD=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_WLP=m
-CONFIG_UWB_I1480U=m
-CONFIG_UWB_I1480U_WLP=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=y
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192SU=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-CONFIG_FB_UDL=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-
-#
-# RAR Register Driver
-#
-CONFIG_RAR_REGISTER=m
-# CONFIG_MRST_RAR_HANDLER is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_IIO is not set
-CONFIG_RAMZSWAP=m
-CONFIG_RAMZSWAP_STATS=y
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_DT3155=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTRS=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CEPH_FS=m
-CONFIG_CEPH_FS_PRETTYDEBUG=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-CONFIG_SYSPROF_TRACER=y
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_IMA is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
diff --git a/testing/source/linux-2.6.35.12-configs/config-huge-2.6.35.12 b/testing/source/linux-2.6.35.12-configs/config-huge-2.6.35.12
deleted file mode 100644
index d9331fe0..00000000
--- a/testing/source/linux-2.6.35.12-configs/config-huge-2.6.35.12
+++ /dev/null
@@ -1,4921 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35.12
-# Fri Apr 22 13:03:06 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_HAVE_EARLY_RES=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_NO_BOOTMEM is not set
-CONFIG_MEMTEST=y
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW_64K=y
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=m
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-# CONFIG_PCIEASPM is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_K8_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_RPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_L2CAP_EXT_FEATURES=y
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-
-#
-# UBI - Unsorted block images
-#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=y
-CONFIG_BLK_CPQ_CISS_DA=y
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=y
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=y
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_ISL29003=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_HPSA=y
-CONFIG_SCSI_3W_9XXX=y
-CONFIG_SCSI_3W_SAS=y
-CONFIG_SCSI_ACARD=y
-CONFIG_SCSI_AACRAID=y
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=y
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=y
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=y
-CONFIG_SCSI_ARCMSR=y
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=y
-CONFIG_MEGARAID_MAILBOX=y
-CONFIG_MEGARAID_LEGACY=y
-CONFIG_MEGARAID_SAS=y
-CONFIG_SCSI_MPT2SAS=y
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=y
-CONFIG_SCSI_BUSLOGIC=y
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=y
-CONFIG_LIBFCOE=y
-CONFIG_FCOE=y
-CONFIG_FCOE_FNIC=y
-CONFIG_SCSI_DMX3191D=y
-CONFIG_SCSI_EATA=y
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=y
-CONFIG_SCSI_GDTH=y
-CONFIG_SCSI_IPS=y
-CONFIG_SCSI_INITIO=y
-CONFIG_SCSI_INIA100=y
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=y
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-CONFIG_SCSI_QLA_ISCSI=y
-CONFIG_SCSI_LPFC=y
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=y
-CONFIG_SCSI_DC390T=y
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=y
-CONFIG_SCSI_PM8001=y
-CONFIG_SCSI_SRP=y
-CONFIG_SCSI_BFA_FC=y
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=y
-CONFIG_ASYNC_RAID6_TEST=m
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_LAN=y
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=y
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=y
-CONFIG_I2O_BLOCK=y
-CONFIG_I2O_SCSI=y
-CONFIG_I2O_PROC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI_PCI=y
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT30XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WINBOND_CIR=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_PC8736x_GPIO=m
-CONFIG_NSC_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_HDAPS=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_IR_CORE=m
-CONFIG_VIDEO_IR=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_IMON=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-
-#
-# Supported FireWire (IEEE 1394) Adapters
-#
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-CONFIG_DVB_FIREDTV_IEEE1394=y
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3304=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-# CONFIG_FB_HGA_ACCEL is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_ATIHDMI=y
-CONFIG_SND_HDA_CODEC_NVHDMI=y
-CONFIG_SND_HDA_CODEC_INTELHDMI=y
-CONFIG_SND_HDA_ELD=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_HIFIER=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EGALAX=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=y
-CONFIG_USB_XHCI_HCD=y
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_USB_ISP1760_HCD=y
-CONFIG_USB_ISP1362_HCD=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=y
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_WLP=m
-CONFIG_UWB_I1480U=m
-CONFIG_UWB_I1480U_WLP=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=y
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192SU=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-CONFIG_FB_UDL=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-
-#
-# RAR Register Driver
-#
-CONFIG_RAR_REGISTER=m
-# CONFIG_MRST_RAR_HANDLER is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_IIO is not set
-CONFIG_RAMZSWAP=m
-CONFIG_RAMZSWAP_STATS=y
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_DT3155=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=y
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=y
-CONFIG_OCFS2_FS_O2CB=y
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTRS=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CEPH_FS=m
-CONFIG_CEPH_FS_PRETTYDEBUG=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_DLM=y
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-CONFIG_SYSPROF_TRACER=y
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_IMA is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
diff --git a/testing/source/linux-2.6.38.4-configs/config-generic-2.6.38.4 b/testing/source/linux-2.6.38.4-configs/config-generic-2.6.38.4
deleted file mode 100644
index 9d3a83e6..00000000
--- a/testing/source/linux-2.6.38.4-configs/config-generic-2.6.38.4
+++ /dev/null
@@ -1,5134 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.38.4 Kernel Configuration
-# Thu Apr 21 20:32:02 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_HARDIRQS_SW_RESEND is not set
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EXPERT is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_CMPXCHG_LOCAL=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_COMPACTION=y
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_RPS=y
-CONFIG_XPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-CONFIG_CAN_SOFTING=m
-CONFIG_CAN_SOFTING_CS=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_HPSA=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_3W_SAS=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=m
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_ARCMSR=m
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_BUSLOGIC=m
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=m
-CONFIG_LIBFCOE=m
-CONFIG_FCOE=m
-CONFIG_FCOE_FNIC=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=m
-CONFIG_SCSI_PM8001=m
-CONFIG_SCSI_SRP=m
-CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_ACARD_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_TARGET_CORE=m
-CONFIG_TCM_IBLOCK=m
-CONFIG_TCM_FILEIO=m
-CONFIG_TCM_PSCSI=m
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=m
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF_DEPENDS=y
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTL8192CE=m
-CONFIG_RTLWIFI=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX_MENU=m
-CONFIG_WL12XX=m
-# CONFIG_WL12XX_HT is not set
-CONFIG_WL12XX_SDIO=m
-CONFIG_WL12XX_SDIO_TEST=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_CDC_NCM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_AS5011=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_QT602240=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_ST1232=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_SERIAL_PCH_UART=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-CONFIG_I2C_EG20T=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_PPS_CLIENT_PARPORT=m
-
-#
-# PPS generators support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-CONFIG_GPIO_ML_IOH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2423=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_BATTERY_MAX17042=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_CHARGER_GPIO=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS620=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SHT21=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_SP5100_TCO=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_NV_TCO=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_CS5535=m
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-CONFIG_MFD_WL1273_CORE=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_RC_CORE=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_IR_WINBOND_CIR=m
-CONFIG_RC_LOOPBACK=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_TIMBERDALE=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_RC=y
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_RADIO_WL1273=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-# CONFIG_DVB_FIREDTV_IEEE1394 is not set
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-CONFIG_DVB_MB86A20S=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-CONFIG_FB_UDL=m
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=m
-CONFIG_HID_EGALAX=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_MULTITOUCH=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_KONEPLUS=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_XHCI_HCD=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_CLKGATE is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_NFC_DEVICES is not set
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_USB_DABUSB=m
-CONFIG_USB_SE401=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
-# CONFIG_BRCMFMAC is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_AUTOFS_FS=m
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-CONFIG_DX_SEP=m
-# CONFIG_IIO is not set
-CONFIG_ZRAM=m
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_ITE8709=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_EASYCAP=m
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=m
-CONFIG_SPEAKUP_SYNTH_ACNTSA=m
-CONFIG_SPEAKUP_SYNTH_ACNTPC=m
-CONFIG_SPEAKUP_SYNTH_APOLLO=m
-CONFIG_SPEAKUP_SYNTH_AUDPTR=m
-CONFIG_SPEAKUP_SYNTH_BNS=m
-CONFIG_SPEAKUP_SYNTH_DECTLK=m
-CONFIG_SPEAKUP_SYNTH_DECEXT=m
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=m
-CONFIG_SPEAKUP_SYNTH_KEYPC=m
-CONFIG_SPEAKUP_SYNTH_LTLK=m
-CONFIG_SPEAKUP_SYNTH_SOFT=m
-CONFIG_SPEAKUP_SYNTH_SPKOUT=m
-CONFIG_SPEAKUP_SYNTH_TXPRT=m
-CONFIG_SPEAKUP_SYNTH_DUMMY=m
-CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=m
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-CONFIG_BKL=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_KSTRTOX is not set
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_TRUSTED_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_USER_API=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
-CONFIG_AVERAGE=y
diff --git a/testing/source/linux-2.6.38.4-configs/config-huge-2.6.38.4 b/testing/source/linux-2.6.38.4-configs/config-huge-2.6.38.4
deleted file mode 100644
index 062fa02e..00000000
--- a/testing/source/linux-2.6.38.4-configs/config-huge-2.6.38.4
+++ /dev/null
@@ -1,5133 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.38.4 Kernel Configuration
-# Thu Apr 21 22:56:33 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_HARDIRQS_SW_RESEND is not set
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EXPERT is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_CMPXCHG_LOCAL=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_COMPACTION=y
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_RPS=y
-CONFIG_XPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-CONFIG_CAN_SOFTING=m
-CONFIG_CAN_SOFTING_CS=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=y
-CONFIG_BLK_CPQ_CISS_DA=y
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=y
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=y
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_HPSA=y
-CONFIG_SCSI_3W_9XXX=y
-CONFIG_SCSI_3W_SAS=y
-CONFIG_SCSI_ACARD=y
-CONFIG_SCSI_AACRAID=y
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=y
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=y
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=y
-CONFIG_SCSI_ARCMSR=y
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=y
-CONFIG_MEGARAID_MAILBOX=y
-CONFIG_MEGARAID_LEGACY=y
-CONFIG_MEGARAID_SAS=y
-CONFIG_SCSI_MPT2SAS=y
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=y
-CONFIG_SCSI_BUSLOGIC=y
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=y
-CONFIG_LIBFCOE=y
-CONFIG_FCOE=y
-CONFIG_FCOE_FNIC=y
-CONFIG_SCSI_DMX3191D=y
-CONFIG_SCSI_EATA=y
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=y
-CONFIG_SCSI_GDTH=y
-CONFIG_SCSI_IPS=y
-CONFIG_SCSI_INITIO=y
-CONFIG_SCSI_INIA100=y
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=y
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-CONFIG_SCSI_QLA_ISCSI=y
-CONFIG_SCSI_LPFC=y
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=y
-CONFIG_SCSI_DC390T=y
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=y
-CONFIG_SCSI_PM8001=y
-CONFIG_SCSI_SRP=y
-CONFIG_SCSI_BFA_FC=y
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_ACARD_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_TARGET_CORE=m
-CONFIG_TCM_IBLOCK=m
-CONFIG_TCM_FILEIO=m
-CONFIG_TCM_PSCSI=m
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_LAN=y
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=y
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=y
-CONFIG_I2O_BLOCK=y
-CONFIG_I2O_SCSI=y
-CONFIG_I2O_PROC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_R8169_VLAN=y
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4_DEPENDS=y
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF_DEPENDS=y
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLWIFI=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTL8192CE=m
-CONFIG_RTLWIFI=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX_MENU=m
-CONFIG_WL12XX=m
-# CONFIG_WL12XX_HT is not set
-CONFIG_WL12XX_SDIO=m
-CONFIG_WL12XX_SDIO_TEST=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_CDC_NCM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_AS5011=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_QT602240=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_ST1232=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_SERIAL_PCH_UART=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-CONFIG_I2C_EG20T=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_PPS_CLIENT_PARPORT=m
-
-#
-# PPS generators support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-CONFIG_GPIO_ML_IOH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2423=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_MAX17040=m
-CONFIG_BATTERY_MAX17042=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_CHARGER_GPIO=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS620=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SHT21=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_SP5100_TCO=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_NV_TCO=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_CS5535=m
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-CONFIG_MFD_WL1273_CORE=m
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_RC_CORE=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_IR_WINBOND_CIR=m
-CONFIG_RC_LOOPBACK=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_TIMBERDALE=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_RC=y
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_RADIO_WL1273=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_FIREWIRE=y
-# CONFIG_DVB_FIREDTV_IEEE1394 is not set
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-CONFIG_DVB_MB86A20S=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-CONFIG_FB_UDL=m
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_MBP_NVIDIA=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=m
-CONFIG_HID_EGALAX=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_MULTITOUCH=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_KONEPLUS=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=y
-CONFIG_USB_XHCI_HCD=y
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_USB_ISP1760_HCD=y
-CONFIG_USB_ISP1362_HCD=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=y
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_CLKGATE is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_NFC_DEVICES is not set
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_USB_DABUSB=m
-CONFIG_USB_SE401=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
-# CONFIG_BRCMFMAC is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_AUTOFS_FS=m
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-CONFIG_DX_SEP=m
-# CONFIG_IIO is not set
-CONFIG_ZRAM=m
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_ST_BT=m
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_ITE8709=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_EASYCAP=m
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=y
-CONFIG_SPEAKUP_SYNTH_ACNTSA=y
-CONFIG_SPEAKUP_SYNTH_ACNTPC=y
-CONFIG_SPEAKUP_SYNTH_APOLLO=y
-CONFIG_SPEAKUP_SYNTH_AUDPTR=y
-CONFIG_SPEAKUP_SYNTH_BNS=y
-CONFIG_SPEAKUP_SYNTH_DECTLK=y
-CONFIG_SPEAKUP_SYNTH_DECEXT=y
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=y
-CONFIG_SPEAKUP_SYNTH_KEYPC=y
-CONFIG_SPEAKUP_SYNTH_LTLK=y
-CONFIG_SPEAKUP_SYNTH_SOFT=y
-CONFIG_SPEAKUP_SYNTH_SPKOUT=y
-CONFIG_SPEAKUP_SYNTH_TXPRT=y
-CONFIG_SPEAKUP_SYNTH_DUMMY=y
-CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=y
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=y
-CONFIG_OCFS2_FS_O2CB=y
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_DLM=y
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-CONFIG_BKL=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_KSTRTOX is not set
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_TRUSTED_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_USER_API=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
-CONFIG_AVERAGE=y
diff --git a/testing/source/linux-2.6.39-rc4-configs/config-generic-2.6.39-rc4 b/testing/source/linux-2.6.39-rc4-configs/config-generic-2.6.39-rc4
deleted file mode 100644
index 2fcb5c64..00000000
--- a/testing/source/linux-2.6.39-rc4-configs/config-generic-2.6.39-rc4
+++ /dev/null
@@ -1,5247 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.39-rc4 Kernel Configuration
-# Tue Apr 19 13:15:01 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_FHANDLE is not set
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EXPERT is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_CMPXCHG_LOCAL=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_COMPACTION=y
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-# CONFIG_RAPIDIO is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_KEYS_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_ROUTE_CLASSID=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_BROADCAST=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_SNMP=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-CONFIG_NETFILTER_XT_SET=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_AUDIT=m
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_SET=m
-CONFIG_IP_SET_MAX=256
-CONFIG_IP_SET_BITMAP_IP=m
-CONFIG_IP_SET_BITMAP_IPMAC=m
-CONFIG_IP_SET_BITMAP_PORT=m
-CONFIG_IP_SET_HASH_IP=m
-CONFIG_IP_SET_HASH_IPPORT=m
-CONFIG_IP_SET_HASH_IPPORTIP=m
-CONFIG_IP_SET_HASH_IPPORTNET=m
-CONFIG_IP_SET_HASH_NET=m
-CONFIG_IP_SET_HASH_NETPORT=m
-CONFIG_IP_SET_LIST_SET=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFB=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_MQPRIO=m
-CONFIG_NET_SCH_CHOKE=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_RPS=y
-CONFIG_RFS_ACCEL=y
-CONFIG_XPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-# CONFIG_CAN_C_CAN is not set
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-CONFIG_CAN_SOFTING=m
-CONFIG_CAN_SOFTING_CS=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_BT_WILINK=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_ARCH_NO_SYSDEV_OPS=y
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_SWAP=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_LATCH_ADDR=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_BCH=m
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_SCSI_BNX2X_FCOE=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_HPSA=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_3W_SAS=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=m
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_ARCMSR=m
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_BUSLOGIC=m
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=m
-CONFIG_LIBFCOE=m
-CONFIG_FCOE=m
-CONFIG_FCOE_FNIC=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=m
-CONFIG_SCSI_PM8001=m
-CONFIG_SCSI_SRP=m
-CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_ACARD_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARASAN_CF=m
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_DM_FLAKEY=m
-CONFIG_TARGET_CORE=m
-CONFIG_TCM_IBLOCK=m
-CONFIG_TCM_FILEIO=m
-CONFIG_TCM_PSCSI=m
-CONFIG_LOOPBACK_TARGET=m
-# CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=m
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_ATH5K_TRACER is not set
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLAGN=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-# CONFIG_IWL_P2P is not set
-CONFIG_IWLWIFI_LEGACY=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
-# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
-CONFIG_IWL4965=m
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2800PCI_RT53XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTL8192CE=m
-CONFIG_RTL8192CU=m
-CONFIG_RTLWIFI=m
-CONFIG_RTL8192C_COMMON=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX_MENU=m
-CONFIG_WL12XX=m
-# CONFIG_WL12XX_HT is not set
-CONFIG_WL12XX_SDIO=m
-CONFIG_WL12XX_SDIO_TEST=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_CDC_NCM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_USB_VL600=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_AS5011=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_ST1232=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_NOZOMI=m
-CONFIG_ISI=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_DEVKMEM=y
-CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_SERIAL_PCH_UART=m
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-# CONFIG_I2C_PXA_PCI is not set
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-CONFIG_I2C_EG20T=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_DIOLAN_U2C=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_PPS_CLIENT_PARPORT=m
-
-#
-# PPS generators support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-CONFIG_GPIO_ML_IOH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2423=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_BQ27X00_I2C=y
-CONFIG_BATTERY_BQ27X00_PLATFORM=y
-CONFIG_BATTERY_MAX17040=m
-CONFIG_BATTERY_MAX17042=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_CHARGER_GPIO=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS620=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LINEAGE=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4151=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6639=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_PMBUS=m
-CONFIG_SENSORS_PMBUS=m
-CONFIG_SENSORS_MAX16064=m
-CONFIG_SENSORS_MAX34440=m
-CONFIG_SENSORS_MAX8688=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SHT21=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_SCH5627=m
-CONFIG_SENSORS_ADS1015=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_SP5100_TCO=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_NV_TCO=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS6105X=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_CS5535=m
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-CONFIG_MFD_WL1273_CORE=m
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=m
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_USERSPACE_CONSUMER=m
-CONFIG_REGULATOR_BQ24022=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8952=m
-CONFIG_REGULATOR_WM8400=m
-CONFIG_REGULATOR_PCF50633=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_TPS6105X=m
-CONFIG_REGULATOR_TPS65023=m
-CONFIG_REGULATOR_TPS6507X=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_AD5398=m
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-# CONFIG_MEDIA_CONTROLLER is not set
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_RC_CORE=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_ITE_CIR=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_IR_WINBOND_CIR=m
-CONFIG_RC_LOOPBACK=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEOBUF2_CORE=m
-CONFIG_VIDEOBUF2_MEMOPS=m
-CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_TIMBERDALE=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_MEDIA_ALTERA_CI=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_VIDEO_NOON010PC30=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_SOC_CAMERA_OV9740=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_NW80X=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_VICAM=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_RC=y
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_RADIO_WL1273=m
-
-#
-# Texas Instruments WL128x FM driver (ST based)
-#
-CONFIG_RADIO_WL128X=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_USB_TECHNISAT_USB2=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-
-#
-# Supported FireWire (IEEE 1394) Adapters
-#
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_DIB9000=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-CONFIG_DVB_STV0367=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-CONFIG_DVB_MB86A20S=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_CYBER2000_DDC=y
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-CONFIG_FB_UDL=m
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_APPLE=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_USB_6FIRE=m
-CONFIG_SND_FIREWIRE=y
-CONFIG_SND_FIREWIRE_LIB=m
-CONFIG_SND_FIREWIRE_SPEAKERS=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KEYTOUCH=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LCPOWER=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_MULTITOUCH=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_COMMON=m
-CONFIG_HID_ROCCAT_ARVO=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_KONEPLUS=m
-CONFIG_HID_ROCCAT_KOVAPLUS=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_XHCI_HCD=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_ISP1362_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_SSB=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_REALTEK=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_STORAGE_ENE_UB6250=m
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_CLKGATE is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_MEMSTICK_R592=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LM3530=m
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_REGULATOR=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_NFC_DEVICES is not set
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_DIGIEPCA=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_COMPUTONE=m
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_DVB_CXD2099=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCMSMAC=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMDBG is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-CONFIG_RTS_PSTOR=m
-# CONFIG_RTS_PSTOR_DEBUG is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-CONFIG_DX_SEP=m
-# CONFIG_IIO is not set
-CONFIG_XVMALLOC=y
-CONFIG_ZRAM=m
-# CONFIG_ZRAM_DEBUG is not set
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_EASYCAP=m
-CONFIG_EASYCAP_SND=y
-# CONFIG_EASYCAP_OSS is not set
-# CONFIG_EASYCAP_DEBUG is not set
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=m
-CONFIG_SPEAKUP_SYNTH_ACNTSA=m
-CONFIG_SPEAKUP_SYNTH_ACNTPC=m
-CONFIG_SPEAKUP_SYNTH_APOLLO=m
-CONFIG_SPEAKUP_SYNTH_AUDPTR=m
-CONFIG_SPEAKUP_SYNTH_BNS=m
-CONFIG_SPEAKUP_SYNTH_DECTLK=m
-CONFIG_SPEAKUP_SYNTH_DECEXT=m
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=m
-CONFIG_SPEAKUP_SYNTH_KEYPC=m
-CONFIG_SPEAKUP_SYNTH_LTLK=m
-CONFIG_SPEAKUP_SYNTH_SOFT=m
-CONFIG_SPEAKUP_SYNTH_SPKOUT=m
-CONFIG_SPEAKUP_SYNTH_TXPRT=m
-CONFIG_SPEAKUP_SYNTH_DUMMY=m
-CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
-CONFIG_DRM_PSB=m
-
-#
-# Altera FPGA firmware download module
-#
-# CONFIG_ALTERA_STAPL is not set
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_DELL_WMI_AIO=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_ACCEL=m
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_ASUS_WMI=m
-CONFIG_ASUS_NB_WMI=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-# CONFIG_XO15_EBOOK is not set
-CONFIG_SAMSUNG_LAPTOP=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=m
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-CONFIG_SIGMA=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_PSTORE=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_KSTRTOX is not set
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_TRUSTED_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_USER_API=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_BCH=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_CPU_RMAP=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
-CONFIG_AVERAGE=y
diff --git a/testing/source/linux-2.6.39-rc4-configs/config-huge-2.6.39-rc4 b/testing/source/linux-2.6.39-rc4-configs/config-huge-2.6.39-rc4
deleted file mode 100644
index c812683d..00000000
--- a/testing/source/linux-2.6.39-rc4-configs/config-huge-2.6.39-rc4
+++ /dev/null
@@ -1,5246 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/x86_64 2.6.39-rc4 Kernel Configuration
-# Tue Apr 19 13:14:59 2011
-#
-CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_FHANDLE is not set
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
-CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EXPERT is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_JUMP_LABEL is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SMP=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_MEMTEST=y
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MATOM is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_CMPXCHG=y
-CONFIG_CMPXCHG_LOCAL=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_XADD=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_AMD_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_API is not set
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MCE_INJECT=m
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_I8K=m
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_X86_MSR=m
-CONFIG_X86_CPUID=m
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_COMPACTION=y
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-# CONFIG_MEMORY_FAILURE is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_EFI=y
-CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="\"\""
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_POWER_METER=m
-CONFIG_ACPI_EC_DEBUGFS=m
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_PCI_SLOT=m
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_HOTPLUG_MEMORY=m
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=m
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_APEI_EINJ=m
-CONFIG_ACPI_APEI_ERST_DEBUG=m
-CONFIG_SFI=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_P4_CLOCKMOD=m
-
-#
-# shared options
-#
-CONFIG_X86_SPEEDSTEP_LIB=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
-#
-# Memory power savings
-#
-CONFIG_I7300_IDLE_IOAT_CHANNEL=y
-CONFIG_I7300_IDLE=m
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_DMAR is not set
-# CONFIG_INTR_REMAP is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_STUB=m
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_PCI_IOAPIC=y
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-# CONFIG_RAPIDIO is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_KEYS_COMPAT=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_ROUTE_CLASSID=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_BROADCAST=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_SNMP=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-CONFIG_NETFILTER_XT_SET=m
-
-#
-# Xtables targets
-#
-CONFIG_NETFILTER_XT_TARGET_AUDIT=m
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-
-#
-# Xtables matches
-#
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_SET=m
-CONFIG_IP_SET_MAX=256
-CONFIG_IP_SET_BITMAP_IP=m
-CONFIG_IP_SET_BITMAP_IPMAC=m
-CONFIG_IP_SET_BITMAP_PORT=m
-CONFIG_IP_SET_HASH_IP=m
-CONFIG_IP_SET_HASH_IPPORT=m
-CONFIG_IP_SET_HASH_IPPORTIP=m
-CONFIG_IP_SET_HASH_IPPORTNET=m
-CONFIG_IP_SET_HASH_NET=m
-CONFIG_IP_SET_HASH_NETPORT=m
-CONFIG_IP_SET_LIST_SET=m
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_NFCT=y
-CONFIG_IP_VS_PE_SIP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_RDS=m
-CONFIG_RDS_RDMA=m
-CONFIG_RDS_TCP=m
-# CONFIG_RDS_DEBUG is not set
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_L2TP=m
-CONFIG_L2TP_DEBUGFS=m
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=m
-CONFIG_L2TP_ETH=m
-CONFIG_STP=m
-CONFIG_GARP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFB=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_MQPRIO=m
-CONFIG_NET_SCH_CHOKE=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-CONFIG_BATMAN_ADV=m
-# CONFIG_BATMAN_ADV_DEBUG is not set
-CONFIG_RPS=y
-CONFIG_RFS_ACCEL=y
-CONFIG_XPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_YAM=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-CONFIG_CAN_JANZ_ICAN3=m
-CONFIG_PCH_CAN=m
-CONFIG_CAN_SJA1000=m
-CONFIG_CAN_SJA1000_PLATFORM=m
-CONFIG_CAN_EMS_PCI=m
-CONFIG_CAN_KVASER_PCI=m
-CONFIG_CAN_PLX_PCI=m
-# CONFIG_CAN_C_CAN is not set
-
-#
-# CAN USB interfaces
-#
-CONFIG_CAN_EMS_USB=m
-CONFIG_CAN_ESD_USB2=m
-CONFIG_CAN_SOFTING=m
-CONFIG_CAN_SOFTING_CS=m
-# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_NSC_FIR=m
-CONFIG_WINBOND_FIR=m
-CONFIG_SMC_IRCC_FIR=m
-CONFIG_ALI_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_VIA_FIR=m
-CONFIG_MCS_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_BT_WILINK=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_NET_9P_RDMA=m
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_ARCH_NO_SYSDEV_OPS=y
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_AR7_PARTS=m
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_SM_FTL=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_SWAP=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_L440GX=m
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
-CONFIG_MTD_INTEL_VR_NOR=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_LATCH_ADDR=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
-CONFIG_MTD_NAND_ECC=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_BCH=m
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_SM_COMMON=m
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_MTD_NAND_DENALI=m
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=m
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=y
-CONFIG_BLK_CPQ_CISS_DA=y
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=y
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DRBD=m
-# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
-CONFIG_BLK_DEV_SX8=y
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_VIRTIO_BLK=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_RBD=m
-CONFIG_SENSORS_LIS3LV02D=m
-CONFIG_MISC_DEVICES=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_ICS932S401=m
-CONFIG_ENCLOSURE_SERVICES=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-CONFIG_HP_ILO=m
-CONFIG_APDS9802ALS=m
-CONFIG_ISL29003=m
-CONFIG_ISL29020=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_BH1770=m
-CONFIG_SENSORS_APDS990X=m
-CONFIG_HMC6352=m
-CONFIG_DS1682=m
-CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_PCH_PHUB=m
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_CB710_CORE=m
-# CONFIG_CB710_DEBUG is not set
-CONFIG_CB710_DEBUG_ASSUMPTIONS=y
-CONFIG_IWMC3200TOP=m
-# CONFIG_IWMC3200TOP_DEBUG is not set
-# CONFIG_IWMC3200TOP_DEBUGFS is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-CONFIG_TI_ST=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_FC_TGT_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_SCSI_BNX2X_FCOE=m
-CONFIG_BE2ISCSI=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_HPSA=y
-CONFIG_SCSI_3W_9XXX=y
-CONFIG_SCSI_3W_SAS=y
-CONFIG_SCSI_ACARD=y
-CONFIG_SCSI_AACRAID=y
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=y
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_MVSAS=y
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=y
-CONFIG_SCSI_ARCMSR=y
-# CONFIG_SCSI_ARCMSR_AER is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=y
-CONFIG_MEGARAID_MAILBOX=y
-CONFIG_MEGARAID_LEGACY=y
-CONFIG_MEGARAID_SAS=y
-CONFIG_SCSI_MPT2SAS=y
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-CONFIG_SCSI_HPTIOP=y
-CONFIG_SCSI_BUSLOGIC=y
-CONFIG_VMWARE_PVSCSI=m
-CONFIG_LIBFC=y
-CONFIG_LIBFCOE=y
-CONFIG_FCOE=y
-CONFIG_FCOE_FNIC=y
-CONFIG_SCSI_DMX3191D=y
-CONFIG_SCSI_EATA=y
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_FUTURE_DOMAIN=y
-CONFIG_SCSI_GDTH=y
-CONFIG_SCSI_IPS=y
-CONFIG_SCSI_INITIO=y
-CONFIG_SCSI_INIA100=y
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=y
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-CONFIG_SCSI_QLA_ISCSI=y
-CONFIG_SCSI_LPFC=y
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-CONFIG_SCSI_DC395x=y
-CONFIG_SCSI_DC390T=y
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_PMCRAID=y
-CONFIG_SCSI_PM8001=y
-CONFIG_SCSI_SRP=y
-CONFIG_SCSI_BFA_FC=y
-CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_INIC162X=y
-CONFIG_SATA_ACARD_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_PDC_ADMA=y
-CONFIG_SATA_QSTOR=y
-CONFIG_SATA_SX4=y
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-CONFIG_ATA_PIIX=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_NV=y
-CONFIG_SATA_PROMISE=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_SIS=y
-CONFIG_SATA_SVW=y
-CONFIG_SATA_ULI=y
-CONFIG_SATA_VIA=y
-CONFIG_SATA_VITESSE=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_ALI=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ARASAN_CF=m
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_ATP867X=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_CYPRESS=y
-CONFIG_PATA_EFAR=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_HPT3X3=y
-CONFIG_PATA_HPT3X3_DMA=y
-CONFIG_PATA_IT8213=y
-CONFIG_PATA_IT821X=y
-CONFIG_PATA_JMICRON=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_NETCELL=y
-CONFIG_PATA_NINJA32=y
-CONFIG_PATA_NS87415=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_OPTIDMA=y
-CONFIG_PATA_PDC2027X=y
-CONFIG_PATA_PDC_OLD=y
-CONFIG_PATA_RADISYS=y
-CONFIG_PATA_RDC=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SCH=y
-CONFIG_PATA_SERVERWORKS=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TOSHIBA=m
-CONFIG_PATA_TRIFLEX=y
-CONFIG_PATA_VIA=y
-CONFIG_PATA_WINBOND=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_CMD640_PCI=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_NS87410=y
-CONFIG_PATA_OPTI=y
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_RZ1000=y
-
-#
-# Generic fallback / legacy drivers
-#
-CONFIG_PATA_ACPI=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_DM_FLAKEY=m
-CONFIG_TARGET_CORE=m
-CONFIG_TCM_IBLOCK=m
-CONFIG_TCM_FILEIO=m
-CONFIG_TCM_PSCSI=m
-CONFIG_LOOPBACK_TARGET=m
-# CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_LAN=y
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
-CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
-CONFIG_I2O_CONFIG=y
-# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
-CONFIG_I2O_BUS=y
-CONFIG_I2O_BLOCK=y
-CONFIG_I2O_SCSI=y
-CONFIG_I2O_PROC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-CONFIG_ARCNET_COM20020=m
-CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_MII=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM63XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HAPPYMEAL=m
-CONFIG_SUNGEM=m
-CONFIG_CASSINI=m
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ETHOC=m
-CONFIG_DNET=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_ULI526X=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_KSZ884X_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_FORCEDETH=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_R6040=m
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SMSC9420=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_KS8842=m
-CONFIG_KS8851_MLL=m
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_SC92031=m
-CONFIG_NET_POCKET=y
-CONFIG_ATP=m
-CONFIG_DE600=m
-CONFIG_DE620=m
-CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IP1000=m
-CONFIG_IGB=m
-CONFIG_IGB_DCA=y
-CONFIG_IGBVF=m
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_SIS190=m
-CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-CONFIG_CNIC=m
-CONFIG_QLA3XXX=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_JME=m
-CONFIG_STMMAC_ETH=m
-# CONFIG_STMMAC_DA is not set
-CONFIG_STMMAC_DUAL_MAC=y
-CONFIG_PCH_GBE=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T3=m
-CONFIG_CHELSIO_T4=m
-CONFIG_CHELSIO_T4VF=m
-CONFIG_ENIC=m
-CONFIG_IXGBE=m
-CONFIG_IXGBE_DCA=y
-CONFIG_IXGBEVF=m
-CONFIG_IXGB=m
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-CONFIG_MYRI10GE=m
-CONFIG_MYRI10GE_DCA=y
-CONFIG_NETXEN_NIC=m
-CONFIG_NIU=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-CONFIG_MLX4_DEBUG=y
-CONFIG_TEHUTI=m
-CONFIG_BNX2X=m
-CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-CONFIG_BNA=m
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-CONFIG_BE2NET=m
-CONFIG_TR=m
-CONFIG_IBMOL=m
-CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
-CONFIG_WLAN=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_LIBERTAS_THINFIRM=m
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AIRO=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_AT76C50X_USB=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-CONFIG_PRISM54=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8180=m
-CONFIG_RTL8187=m
-CONFIG_RTL8187_LEDS=y
-CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_MWL8K=m
-CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
-CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_ATH5K_TRACER is not set
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-CONFIG_CARL9170=m
-CONFIG_CARL9170_LEDS=y
-CONFIG_CARL9170_WPC=y
-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
-CONFIG_IWLAGN=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-# CONFIG_IWL_P2P is not set
-CONFIG_IWLWIFI_LEGACY=m
-
-#
-# Debugging Options
-#
-# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
-# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
-CONFIG_IWL4965=m
-CONFIG_IWL3945=m
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG is not set
-# CONFIG_IWM_TRACING is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-CONFIG_LIBERTAS_MESH=y
-CONFIG_HERMES=m
-# CONFIG_HERMES_PRISM is not set
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-CONFIG_ORINOCO_USB=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
-CONFIG_RT2X00=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT61PCI=m
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2800PCI_RT53XX=y
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTL8192CE=m
-CONFIG_RTL8192CU=m
-CONFIG_RTLWIFI=m
-CONFIG_RTL8192C_COMMON=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX_MENU=m
-CONFIG_WL12XX=m
-# CONFIG_WL12XX_HT is not set
-CONFIG_WL12XX_SDIO=m
-CONFIG_WL12XX_SDIO_TEST=m
-CONFIG_WL12XX_PLATFORM_DATA=y
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-CONFIG_WIMAX_I2400M=m
-CONFIG_WIMAX_I2400M_USB=m
-CONFIG_WIMAX_I2400M_SDIO=m
-# CONFIG_WIMAX_IWMC3200_SDIO is not set
-CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_CDC_NCM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_NET_CX82310_ETH=m
-CONFIG_USB_HSO=m
-CONFIG_USB_NET_INT51X1=m
-CONFIG_USB_IPHETH=m
-CONFIG_USB_SIERRA_NET=m
-CONFIG_USB_VL600=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_ARCNET_COM20020_CS=m
-CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
-CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_CYCLADES_SYNC=m
-CONFIG_CYCLOMX_X25=y
-CONFIG_SBNI=m
-# CONFIG_SBNI_MULTILINE is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_ATM_SOLOS=m
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-
-#
-# CAIF transport drivers
-#
-CONFIG_FDDI=y
-CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
-CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-CONFIG_NET_FC=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_VIRTIO_NET=m
-CONFIG_VMXNET3=m
-CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-
-#
-# Active cards
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_ISDN_DRV_GIGASET=m
-# CONFIG_GIGASET_CAPI is not set
-CONFIG_GIGASET_I4L=y
-# CONFIG_GIGASET_DUMMYLL is not set
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-CONFIG_MISDN=m
-CONFIG_MISDN_DSP=m
-CONFIG_MISDN_L1OIP=m
-
-#
-# mISDN hardware drivers
-#
-CONFIG_MISDN_HFCPCI=m
-CONFIG_MISDN_HFCMULTI=m
-CONFIG_MISDN_HFCUSB=m
-CONFIG_MISDN_AVMFRITZ=m
-CONFIG_MISDN_SPEEDFAX=m
-CONFIG_MISDN_INFINEON=m
-CONFIG_MISDN_W6692=m
-CONFIG_MISDN_NETJET=m
-CONFIG_MISDN_IPAC=m
-CONFIG_MISDN_ISAR=m
-CONFIG_ISDN_HDLC=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_QT2160=m
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_SENTELIC=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_MOUSE_SYNAPTICS_I2C=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_AS5011=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_JOYSTICK_WALKERA0701 is not set
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=m
-CONFIG_TABLET_USB_AIPTEK=m
-CONFIG_TABLET_USB_GTCO=m
-CONFIG_TABLET_USB_HANWANG=m
-CONFIG_TABLET_USB_KBTAB=m
-CONFIG_TABLET_USB_WACOM=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7879=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_BU21013=m
-CONFIG_TOUCHSCREEN_CY8CTMG110=m
-CONFIG_TOUCHSCREEN_DYNAPRO=m
-CONFIG_TOUCHSCREEN_HAMPSHIRE=m
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_WACOM_W8001=m
-CONFIG_TOUCHSCREEN_MCS5000=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_TOUCHSCREEN_TSC2007=m
-CONFIG_TOUCHSCREEN_ST1232=m
-CONFIG_TOUCHSCREEN_TPS6507X=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_AD714X_I2C=m
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_APANEL=m
-CONFIG_INPUT_ATLAS_BTNS=m
-CONFIG_INPUT_ATI_REMOTE=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF50633_PMU=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_ADXL34X_I2C=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_NOZOMI=m
-CONFIG_ISI=m
-CONFIG_N_HDLC=m
-CONFIG_N_GSM=m
-CONFIG_DEVKMEM=y
-CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
-CONFIG_SERIAL_PCH_UART=m
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_HVC_DRIVER=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_NVRAM=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_IPWIRELESS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-CONFIG_HANGCHECK_TIMER=m
-CONFIG_TCG_TPM=m
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_NSC is not set
-CONFIG_TCG_ATMEL=m
-# CONFIG_TCG_INFINEON is not set
-CONFIG_TELCLOCK=m
-CONFIG_DEVPORT=y
-CONFIG_RAMOOPS=m
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-
-#
-# ACPI drivers
-#
-CONFIG_I2C_SCMI=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_INTEL_MID=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
-# CONFIG_I2C_PXA_PCI is not set
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
-CONFIG_I2C_EG20T=m
-
-#
-# External I2C/SMBus adapter drivers
-#
-CONFIG_I2C_DIOLAN_U2C=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_STUB=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-
-#
-# PPS clients support
-#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-CONFIG_PPS_CLIENT_LDISC=m
-CONFIG_PPS_CLIENT_PARPORT=m
-
-#
-# PPS generators support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MAX730X=m
-
-#
-# Memory mapped GPIO expanders:
-#
-CONFIG_GPIO_BASIC_MMIO=m
-CONFIG_GPIO_IT8761E=m
-CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
-
-#
-# PCI GPIO expanders:
-#
-CONFIG_GPIO_CS5535=m
-# CONFIG_GPIO_LANGWELL is not set
-CONFIG_GPIO_PCH=m
-CONFIG_GPIO_ML_IOH=m
-# CONFIG_GPIO_TIMBERDALE is not set
-CONFIG_GPIO_RDC321X=m
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_UCB1400 is not set
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_GPIO_JANZ_TTL=m
-CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2423=m
-CONFIG_W1_SLAVE_DS2431=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
-CONFIG_W1_SLAVE_DS2760=m
-CONFIG_W1_SLAVE_BQ27000=m
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_TEST_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_DS2782=m
-CONFIG_BATTERY_BQ20Z75=m
-CONFIG_BATTERY_BQ27x00=m
-CONFIG_BATTERY_BQ27X00_I2C=y
-CONFIG_BATTERY_BQ27X00_PLATFORM=y
-CONFIG_BATTERY_MAX17040=m
-CONFIG_BATTERY_MAX17042=m
-CONFIG_CHARGER_PCF50633=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_CHARGER_GPIO=m
-CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_ABITUGURU=m
-CONFIG_SENSORS_ABITUGURU3=m
-CONFIG_SENSORS_AD7414=m
-CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ADT7411=m
-CONFIG_SENSORS_ADT7462=m
-CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7475=m
-CONFIG_SENSORS_ASC7621=m
-CONFIG_SENSORS_K8TEMP=m
-CONFIG_SENSORS_K10TEMP=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_ATXP1=m
-CONFIG_SENSORS_DS620=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_F71882FG=m
-CONFIG_SENSORS_F75375S=m
-CONFIG_SENSORS_FSCHMD=m
-CONFIG_SENSORS_G760A=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_CORETEMP=m
-CONFIG_SENSORS_PKGTEMP=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_JC42=m
-CONFIG_SENSORS_LINEAGE=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_LM93=m
-CONFIG_SENSORS_LTC4151=m
-CONFIG_SENSORS_LTC4215=m
-CONFIG_SENSORS_LTC4245=m
-CONFIG_SENSORS_LTC4261=m
-CONFIG_SENSORS_LM95241=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_MAX6639=m
-CONFIG_SENSORS_MAX6650=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_PC87427=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_PMBUS=m
-CONFIG_SENSORS_PMBUS=m
-CONFIG_SENSORS_MAX16064=m
-CONFIG_SENSORS_MAX34440=m
-CONFIG_SENSORS_MAX8688=m
-CONFIG_SENSORS_SHT15=m
-CONFIG_SENSORS_SHT21=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMM665=m
-CONFIG_SENSORS_DME1737=m
-CONFIG_SENSORS_EMC1403=m
-CONFIG_SENSORS_EMC2103=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_SMSC47M192=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_SCH5627=m
-CONFIG_SENSORS_ADS1015=m
-CONFIG_SENSORS_ADS7828=m
-CONFIG_SENSORS_AMC6821=m
-CONFIG_SENSORS_THMC50=m
-CONFIG_SENSORS_TMP102=m
-CONFIG_SENSORS_TMP401=m
-CONFIG_SENSORS_TMP421=m
-CONFIG_SENSORS_VIA_CPUTEMP=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_VT1211=m
-CONFIG_SENSORS_VT8231=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83795=m
-# CONFIG_SENSORS_W83795_FANCTRL is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83L786NG=m
-CONFIG_SENSORS_W83627HF=m
-CONFIG_SENSORS_W83627EHF=m
-CONFIG_SENSORS_APPLESMC=m
-
-#
-# ACPI drivers
-#
-CONFIG_SENSORS_ATK0110=m
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_F71808E_WDT=m
-CONFIG_SP5100_TCO=m
-CONFIG_GEODE_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_IBMASR=m
-CONFIG_WAFER_WDT=m
-CONFIG_I6300ESB_WDT=m
-CONFIG_ITCO_WDT=m
-CONFIG_ITCO_VENDOR_SUPPORT=y
-CONFIG_IT8712F_WDT=m
-CONFIG_IT87_WDT=m
-CONFIG_HP_WATCHDOG=m
-CONFIG_HPWDT_NMI_DECODING=y
-CONFIG_SC1200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_NV_TCO=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_CPU5_WDT=m
-CONFIG_SMSC_SCH311X_WDT=m
-CONFIG_SMSC37B787_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83697HF_WDT=m
-CONFIG_W83697UG_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_W83977F_WDT=m
-CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=m
-# CONFIG_MFD_SM501 is not set
-CONFIG_HTC_PASIC3=m
-CONFIG_UCB1400_CORE=m
-CONFIG_TPS6105X=m
-CONFIG_TPS65010=m
-CONFIG_TPS6507X=m
-# CONFIG_MFD_TMIO is not set
-CONFIG_MFD_WM8400=m
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
-# CONFIG_ABX500_CORE is not set
-CONFIG_MFD_CS5535=m
-CONFIG_MFD_TIMBERDALE=m
-CONFIG_LPC_SCH=m
-CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
-CONFIG_MFD_VX855=m
-CONFIG_MFD_WL1273_CORE=m
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=m
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_USERSPACE_CONSUMER=m
-CONFIG_REGULATOR_BQ24022=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8952=m
-CONFIG_REGULATOR_WM8400=m
-CONFIG_REGULATOR_PCF50633=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_TPS6105X=m
-CONFIG_REGULATOR_TPS65023=m
-CONFIG_REGULATOR_TPS6507X=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_AD5398=m
-CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
-# CONFIG_MEDIA_CONTROLLER is not set
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_RC_CORE=m
-CONFIG_LIRC=m
-CONFIG_RC_MAP=m
-CONFIG_IR_NEC_DECODER=m
-CONFIG_IR_RC5_DECODER=m
-CONFIG_IR_RC6_DECODER=m
-CONFIG_IR_JVC_DECODER=m
-CONFIG_IR_SONY_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_ENE=m
-CONFIG_IR_IMON=m
-CONFIG_IR_MCEUSB=m
-CONFIG_IR_ITE_CIR=m
-CONFIG_IR_NUVOTON=m
-CONFIG_IR_STREAMZAP=m
-CONFIG_IR_WINBOND_CIR=m
-CONFIG_RC_LOOPBACK=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_MEDIA_TUNER_TDA18218=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_V4L2_MEM2MEM_DEV=m
-CONFIG_VIDEOBUF2_CORE=m
-CONFIG_VIDEOBUF2_MEMOPS=m
-CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# RDS decoders
-#
-CONFIG_VIDEO_SAA6588=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_ADV7180=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9V011=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP514X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_TVP7002=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_THS7303=m
-CONFIG_VIDEO_ADV7343=m
-CONFIG_VIDEO_AK881X=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_RC=y
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_TIMBERDALE=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_MPEG=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_MEDIA_ALTERA_CI=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-CONFIG_VIDEO_CX18_ALSA=m
-CONFIG_VIDEO_SAA7164=m
-CONFIG_VIDEO_CAFE_CCIC=m
-CONFIG_VIDEO_SR030PC30=m
-CONFIG_VIDEO_VIA_CAMERA=m
-CONFIG_VIDEO_NOON010PC30=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_SOC_CAMERA_OV9740=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_NW80X=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_VICAM=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_TLG2300=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_RC=y
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_MEM2MEM_TESTDEV=m
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_I2C_SI4713=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_DSBR=m
-# CONFIG_RADIO_SI470X is not set
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
-CONFIG_RADIO_WL1273=m
-
-#
-# Texas Instruments WL128x FM driver (ST based)
-#
-CONFIG_RADIO_WL128X=m
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_USB_TECHNISAT_USB2=m
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_USB_DRV=m
-CONFIG_SMS_SDIO_DRV=m
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-
-#
-# Supported FireWire (IEEE 1394) Adapters
-#
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_INPUT=y
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-CONFIG_DVB_PT1=m
-
-#
-# Supported Mantis Adapters
-#
-CONFIG_MANTIS_CORE=m
-CONFIG_DVB_MANTIS=m
-CONFIG_DVB_HOPPER=m
-
-#
-# Supported nGene Adapters
-#
-CONFIG_DVB_NGENE=m
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-CONFIG_DVB_STB0899=m
-CONFIG_DVB_STB6100=m
-CONFIG_DVB_STV090x=m
-CONFIG_DVB_STV6110x=m
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_ZL10036=m
-CONFIG_DVB_ZL10039=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_STV6110=m
-CONFIG_DVB_STV0900=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_TDA8261=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TUNER_CX24113=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-CONFIG_DVB_DS3000=m
-CONFIG_DVB_MB86A16=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_S5H1432=m
-CONFIG_DVB_DRX397XD=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_DIB9000=m
-CONFIG_DVB_TDA10048=m
-CONFIG_DVB_AF9013=m
-CONFIG_DVB_EC100=m
-CONFIG_DVB_STV0367=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-CONFIG_DVB_S921=m
-CONFIG_DVB_DIB8000=m
-CONFIG_DVB_MB86A20S=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_TUNER_DIB0090=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_ISL6423=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DVB_LGS8GXX=m
-CONFIG_DVB_ATBM8830=m
-CONFIG_DVB_TDA665x=m
-CONFIG_DVB_IX2505V=m
-
-#
-# Tools to develop new frontends
-#
-CONFIG_DVB_DUMMY_FE=m
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_VIA=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_DRM=m
-CONFIG_DRM_KMS_HELPER=m
-CONFIG_DRM_TTM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_RADEON_KMS=y
-CONFIG_DRM_I810=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
-CONFIG_STUB_POULSBO=m
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
-CONFIG_FB_SVGALIB=m
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-CONFIG_FB_CYBER2000=m
-CONFIG_FB_CYBER2000_DDC=y
-CONFIG_FB_ARC=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-# CONFIG_FB_UVESA is not set
-CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_S3=m
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_VIA=m
-# CONFIG_FB_VIA_DIRECT_PROCFS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
-CONFIG_FB_TMIO=m
-CONFIG_FB_TMIO_ACCELL=y
-CONFIG_FB_UDL=m
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_METRONOME=m
-CONFIG_FB_MB862XX=m
-CONFIG_FB_MB862XX_PCI_GDC=y
-CONFIG_FB_BROADSHEET=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PROGEAR=m
-CONFIG_BACKLIGHT_CARILLO_RANCH=m
-CONFIG_BACKLIGHT_APPLE=m
-CONFIG_BACKLIGHT_SAHARA=m
-CONFIG_BACKLIGHT_ADP8860=m
-CONFIG_BACKLIGHT_PCF50633=m
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DMA_SGBUF=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_ALOOP=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_PCI=y
-CONFIG_SND_AD1889=m
-CONFIG_SND_ALS300=m
-CONFIG_SND_ALS4000=m
-CONFIG_SND_ALI5451=m
-CONFIG_SND_ASIHPI=m
-CONFIG_SND_ATIIXP=m
-CONFIG_SND_ATIIXP_MODEM=m
-CONFIG_SND_AU8810=m
-CONFIG_SND_AU8820=m
-CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
-CONFIG_SND_AZT3328=m
-CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
-CONFIG_SND_CA0106=m
-CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
-CONFIG_SND_OXYGEN=m
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS5530=m
-CONFIG_SND_CS5535AUDIO=m
-CONFIG_SND_CTXFI=m
-CONFIG_SND_DARLA20=m
-CONFIG_SND_GINA20=m
-CONFIG_SND_LAYLA20=m
-CONFIG_SND_DARLA24=m
-CONFIG_SND_GINA24=m
-CONFIG_SND_LAYLA24=m
-CONFIG_SND_MONA=m
-CONFIG_SND_MIA=m
-CONFIG_SND_ECHO3G=m
-CONFIG_SND_INDIGO=m
-CONFIG_SND_INDIGOIO=m
-CONFIG_SND_INDIGODJ=m
-CONFIG_SND_INDIGOIOX=m
-CONFIG_SND_INDIGODJX=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_EMU10K1X=m
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-CONFIG_SND_ES1938=m
-CONFIG_SND_ES1968=m
-CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_HWDEP=y
-CONFIG_SND_HDA_RECONFIG=y
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_INPUT_JACK=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-CONFIG_SND_HDSP=m
-CONFIG_SND_HDSPM=m
-CONFIG_SND_ICE1712=m
-CONFIG_SND_ICE1724=m
-CONFIG_SND_INTEL8X0=m
-CONFIG_SND_INTEL8X0M=m
-CONFIG_SND_KORG1212=m
-CONFIG_SND_LX6464ES=m
-CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_INPUT=y
-CONFIG_SND_MIXART=m
-CONFIG_SND_NM256=m
-CONFIG_SND_PCXHR=m
-CONFIG_SND_RIPTIDE=m
-CONFIG_SND_RME32=m
-CONFIG_SND_RME96=m
-CONFIG_SND_RME9652=m
-CONFIG_SND_SONICVIBES=m
-CONFIG_SND_TRIDENT=m
-CONFIG_SND_VIA82XX=m
-CONFIG_SND_VIA82XX_MODEM=m
-CONFIG_SND_VIRTUOSO=m
-CONFIG_SND_VX222=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_UA101=m
-CONFIG_SND_USB_USX2Y=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_USB_US122L=m
-CONFIG_SND_USB_6FIRE=m
-CONFIG_SND_FIREWIRE=y
-CONFIG_SND_FIREWIRE_LIB=m
-CONFIG_SND_FIREWIRE_SPEAKERS=m
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_3M_PCT=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_ACRUX=m
-CONFIG_HID_ACRUX_FF=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CANDO=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=m
-CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KEYTOUCH=m
-CONFIG_HID_KYE=m
-CONFIG_HID_UCLOGIC=m
-CONFIG_HID_WALTOP=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LCPOWER=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MOSART=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_MULTITOUCH=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LCD=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_QUANTA=m
-CONFIG_HID_ROCCAT=m
-CONFIG_HID_ROCCAT_COMMON=m
-CONFIG_HID_ROCCAT_ARVO=m
-CONFIG_HID_ROCCAT_KONE=m
-CONFIG_HID_ROCCAT_KONEPLUS=m
-CONFIG_HID_ROCCAT_KOVAPLUS=m
-CONFIG_HID_ROCCAT_PYRA=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_STANTUM=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=m
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=y
-CONFIG_USB_XHCI_HCD=y
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_USB_ISP1760_HCD=y
-CONFIG_USB_ISP1362_HCD=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_SL811_HCD=y
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_WHCI_HCD=m
-CONFIG_USB_HWA_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_REALTEK=m
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_STORAGE_ENE_UB6250=m
-CONFIG_USB_UAS=m
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7715_PARPORT=y
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_QCAUX=m
-CONFIG_USB_SERIAL_QUALCOMM=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SAMBA=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_SYMBOL=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-CONFIG_USB_SERIAL_ZIO=m
-CONFIG_USB_SERIAL_SSU100=m
-CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_YUREX=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-CONFIG_UWB_I1480U=m
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_CLKGATE is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_WBSD=m
-CONFIG_MMC_TIFM_SD=m
-CONFIG_MMC_SDRICOH_CS=m
-CONFIG_MMC_CB710=m
-CONFIG_MMC_VIA_SDMMC=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
-CONFIG_MEMSTICK_TIFM_MS=m
-CONFIG_MEMSTICK_JMICRON_38X=m
-CONFIG_MEMSTICK_R592=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LM3530=m
-CONFIG_LEDS_NET5501=m
-CONFIG_LEDS_ALIX2=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_REGULATOR=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_INTEL_SS4200=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_DELL_NETBOOKS=m
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_NFC_DEVICES is not set
-CONFIG_ACCESSIBILITY=y
-CONFIG_A11Y_BRAILLE_CONSOLE=y
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-CONFIG_INFINIBAND_QIB=m
-CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_NES=m
-# CONFIG_INFINIBAND_NES_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_DECODE_MCE=y
-CONFIG_EDAC_MCE_INJ=m
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1374=m
-CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS3232=m
-CONFIG_RTC_DRV_MAX6900=m
-CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_X1205=m
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_BQ32K=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_FM3130=m
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_RX8025=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_PCF50633=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_MID_DMAC=m
-CONFIG_INTEL_IOATDMA=m
-CONFIG_TIMB_DMA=m
-CONFIG_PCH_DMA=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-CONFIG_DMATEST=m
-CONFIG_DCA=m
-CONFIG_AUXDISPLAY=y
-# CONFIG_KS0108 is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_AEC=m
-CONFIG_UIO_SERCOS3=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_UIO_NETX=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
-CONFIG_DIGIEPCA=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_COMPUTONE=m
-# CONFIG_ET131X is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_VIDEO_GO7007 is not set
-CONFIG_VIDEO_CX25821=m
-CONFIG_VIDEO_CX25821_ALSA=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_ALSA=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_DVB_CXD2099=m
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-CONFIG_BRCM80211=m
-CONFIG_BRCMSMAC=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMDBG is not set
-CONFIG_RT2860=m
-CONFIG_RT2870=m
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
-CONFIG_R8187SE=m
-CONFIG_RTL8192U=m
-CONFIG_RTL8192E=m
-CONFIG_R8712U=m
-# CONFIG_R8712_AP is not set
-CONFIG_RTS_PSTOR=m
-# CONFIG_RTS_PSTOR_DEBUG is not set
-# CONFIG_TRANZPORT is not set
-CONFIG_POHMELFS=m
-# CONFIG_POHMELFS_DEBUG is not set
-CONFIG_POHMELFS_CRYPTO=y
-CONFIG_IDE_PHISON=m
-CONFIG_LINE6_USB=m
-# CONFIG_LINE6_USB_DEBUG is not set
-# CONFIG_LINE6_USB_DUMP_CTRL is not set
-# CONFIG_LINE6_USB_DUMP_MIDI is not set
-# CONFIG_LINE6_USB_DUMP_PCM is not set
-# CONFIG_LINE6_USB_RAW is not set
-# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
-CONFIG_DRM_VMWGFX=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-CONFIG_DRM_NOUVEAU_DEBUG=y
-
-#
-# I2C encoder or helper chips
-#
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-CONFIG_USB_SERIAL_QUATECH2=m
-CONFIG_USB_SERIAL_QUATECH_USB2=m
-CONFIG_VT6655=m
-CONFIG_VT6656=m
-# CONFIG_HYPERV is not set
-# CONFIG_VME_BUS is not set
-CONFIG_DX_SEP=m
-# CONFIG_IIO is not set
-CONFIG_XVMALLOC=y
-CONFIG_ZRAM=m
-# CONFIG_ZRAM_DEBUG is not set
-CONFIG_WLAGS49_H2=m
-CONFIG_WLAGS49_H25=m
-CONFIG_FB_SM7XX=m
-CONFIG_VIDEO_DT3155=m
-CONFIG_DT3155_CCIR=y
-CONFIG_CRYSTALHD=m
-# CONFIG_CXT1E1 is not set
-CONFIG_FB_XGI=m
-CONFIG_LIRC_STAGING=y
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SASEM=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SERIAL_TRANSMITTER=y
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_TTUSBIR=m
-CONFIG_LIRC_ZILOG=m
-CONFIG_EASYCAP=m
-CONFIG_EASYCAP_SND=y
-# CONFIG_EASYCAP_OSS is not set
-# CONFIG_EASYCAP_DEBUG is not set
-CONFIG_SOLO6X10=m
-CONFIG_ACPI_QUICKSTART=m
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_SBE_2T3E3=m
-CONFIG_ATH6K_LEGACY=m
-CONFIG_AR600x_SD31_XXX=y
-# CONFIG_AR600x_WB31_XXX is not set
-# CONFIG_AR600x_SD32_XXX is not set
-# CONFIG_AR600x_CUSTOM_XXX is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_CFG80211 is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-# CONFIG_ATH6KL_DEBUG is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-CONFIG_SPEAKUP=y
-CONFIG_SPEAKUP_SYNTH_ACNTSA=y
-CONFIG_SPEAKUP_SYNTH_ACNTPC=y
-CONFIG_SPEAKUP_SYNTH_APOLLO=y
-CONFIG_SPEAKUP_SYNTH_AUDPTR=y
-CONFIG_SPEAKUP_SYNTH_BNS=y
-CONFIG_SPEAKUP_SYNTH_DECTLK=y
-CONFIG_SPEAKUP_SYNTH_DECEXT=y
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DTLK=y
-CONFIG_SPEAKUP_SYNTH_KEYPC=y
-CONFIG_SPEAKUP_SYNTH_LTLK=y
-CONFIG_SPEAKUP_SYNTH_SOFT=y
-CONFIG_SPEAKUP_SYNTH_SPKOUT=y
-CONFIG_SPEAKUP_SYNTH_TXPRT=y
-CONFIG_SPEAKUP_SYNTH_DUMMY=y
-CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
-CONFIG_DRM_PSB=m
-
-#
-# Altera FPGA firmware download module
-#
-# CONFIG_ALTERA_STAPL is not set
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_WMI=m
-CONFIG_DELL_WMI_AIO=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_HP_ACCEL=m
-CONFIG_HP_WMI=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_THINKPAD_ACPI=m
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_SENSORS_HDAPS=m
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_ASUS_WMI=m
-CONFIG_ASUS_NB_WMI=m
-CONFIG_EEEPC_WMI=m
-CONFIG_ACPI_WMI=m
-CONFIG_MSI_WMI=m
-CONFIG_ACPI_ASUS=m
-CONFIG_TOPSTAR_LAPTOP=m
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_ACPI_CMPC=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-# CONFIG_XO15_EBOOK is not set
-CONFIG_SAMSUNG_LAPTOP=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-CONFIG_EDD_OFF=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_EFI_VARS=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=m
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-CONFIG_SIGMA=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-CONFIG_GFS2_FS=y
-CONFIG_GFS2_FS_LOCKING_DLM=y
-CONFIG_OCFS2_FS=y
-CONFIG_OCFS2_FS_O2CB=y
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
-# CONFIG_OCFS2_FS_STATS is not set
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_QUOTACTL_COMPAT=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_LOGFS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_PSTORE=y
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_DEPRECATED=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_CEPH_FS=m
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-CONFIG_CIFS_FSCACHE=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-# CONFIG_AFS_FSCACHE is not set
-CONFIG_9P_FS=m
-# CONFIG_9P_FSCACHE is not set
-# CONFIG_9P_FS_POSIX_ACL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_DLM=y
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_RING_BUFFER_BENCHMARK=m
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_ASYNC_RAID6_TEST=m
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_KSTRTOX is not set
-CONFIG_STRICT_DEVMEM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_RODATA_TEST=y
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_TRUSTED_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SELINUX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
-CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_FPU=y
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_TWOFISH_X86_64=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_USER_API=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_HIFN_795X=m
-CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_APIC_ARCHITECTURE=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_MMU_AUDIT=y
-CONFIG_VHOST_NET=m
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_RAID6_PQ=y
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_BCH=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_CPU_RMAP=y
-CONFIG_NLATTR=y
-CONFIG_LRU_CACHE=m
-CONFIG_AVERAGE=y
diff --git a/testing/source/mesa/README.GIT b/testing/source/mesa/README.GIT
deleted file mode 100644
index 4e79f374..00000000
--- a/testing/source/mesa/README.GIT
+++ /dev/null
@@ -1,16 +0,0 @@
-Anonymous git Access
-
-   To get the Mesa sources anonymously (read-only):
-
-    1. Install the git software on your computer if needed.
-
-    2. Get an initial, local copy of the repository with:
-
-     git clone git://anongit.freedesktop.org/git/mesa/mesa
-
-
-    3. Later, you can update your tree from the master repository with:
-
-     git pull origin
-
-
diff --git a/testing/source/mesa/get-mesa.sh b/testing/source/mesa/get-mesa.sh
deleted file mode 100755
index 253deeb4..00000000
--- a/testing/source/mesa/get-mesa.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-# Pull a stable branch + patches
-BRANCH=7.10
-
-rm -rf mesa
-git clone git://anongit.freedesktop.org/git/mesa/mesa
-# package the source archive and clean up:
-( cd mesa 
-  git checkout $BRANCH || exit 1
-)
-HEADISAT="$(cat mesa/.git/packed-refs | grep "refs/remotes/origin/${BRANCH}$" | cut -b1-7)"
-# Cleanup.  We're not packing up the whole git repo.
-( cd mesa && find . -type d -name ".git*" -exec rm -rf {} \; 2> /dev/null )
-DATE=$(date +%Y%m%d)
-mv mesa Mesa-${BRANCH}_${HEADISAT}
-tar cf MesaLib-${BRANCH}_${HEADISAT}.tar Mesa-${BRANCH}_${HEADISAT}
-xz -9 MesaLib-${BRANCH}_${HEADISAT}.tar
-rm -rf MesaLib-${BRANCH}_${HEADISAT}
-echo
-echo "Mesa branch $BRANCH with HEAD at $HEADISAT packaged as MesaLib-${BRANCH}_${HEADISAT}.tar.xz"
-echo
diff --git a/testing/source/mesa/mesa.SlackBuild b/testing/source/mesa/mesa.SlackBuild
deleted file mode 100755
index 7d612e79..00000000
--- a/testing/source/mesa/mesa.SlackBuild
+++ /dev/null
@@ -1,175 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=mesa
-VERSION=7.10.2
-DEMOVERS=8.0.1
-BUILD=${BUILD:-1}
-
-NUMJOBS=${NUMJOBS:--j8}
-
-# Be sure this list is up-to-date:
-DRI_DRIVERS="i810,i915,i965,mach64,mga,nouveau,r128,r200,r300,r600,radeon,savage,sis,tdfx,unichrome,swrast"
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mesa
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf Mesa-${VERSION}
-
-tar xvf $CWD/MesaLib-${VERSION}.tar.?z* || exit 1
-# If MesaLib came from git, we might already have GLUT.
-if [ ! -d Mesa-${VERSION}/src/glut/glx ]; then
-  tar xvf $CWD/MesaGLUT-${VERSION}.tar.?z* || exit 1
-fi
-
-cd Mesa-$VERSION
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# Apply patches from git (and maybe elsewhere):
-# Patches obtained by:
-#   git checkout origin/7.9
-#   git format-patch 67aeab0b77fb6be864088e69ea74a010b6543fa1..
-if /bin/ls $CWD/patches/*.patch 1> /dev/null 2> /dev/null ; then
-  for patch in $CWD/patches/*.patch ; do
-    patch -p1 < $patch || exit 1 ; 
-  done
-fi
-
-# Revert "i915: Enable ARB_fragment_shader by default."
-# https://bugzilla.redhat.com/show_bug.cgi?id=643399 
-zcat $CWD/patches/i915_fragment_shader_disable.patch.gz | patch -p1 || exit 1
-
-## Allow Mesa 7.9.x to build against libdrm-2.4.23:
-#zcat $CWD/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch.gz | patch -p1 || exit 1
-
-if [ ! -r configure ]; then
-  autoreconf || exit 1
-fi
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/mesa-$VERSION \
-  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
-  --with-dri-drivers="$DRI_DRIVERS" \
-  --enable-xcb \
-  --enable-gallium-nouveau \
-  --build=$ARCH-slackware-linux
-
-#  --enable-gallium-llvm \
-#  --enable-gallium-swrast \
-#  --disable-gallium-svga \
-#  --disable-gallium-i915 \
-#  --disable-gallium-i965 \
-#  --disable-gallium-radeon \
-#  --disable-gallium-r600 \
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Now install the demos
-( cd $TMP
-  rm -rf mesa-demos-$DEMOVERS
-  tar xvf $CWD/mesa-demos-$DEMOVERS.tar.?z* || exit 1
-  cd mesa-demos-$DEMOVERS
-  chown -R root:root .
-  find . \
-    \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-    -exec chmod 755 {} \; -o \
-    \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-    -exec chmod 644 {} \;  
-  CFLAGS="$SLKCFLAGS" \
-  ./configure \
-    --prefix=/usr \
-    --build=$ARCH-slackware-linux
-  # Build and install gears and glinfo, as well as a few other demos
-  make -C src/demos gears glinfo
-  make -C src/xdemos \
-    glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
-    glxheads glxinfo glxpbdemo glxpixmap
-  mkdir -p $PKG/usr/bin
-  cp -a src/demos/{gears,glinfo} $PKG/usr/bin
-  for i in glthreads glxcontexts glxdemo glxgears glxgears_fbconfig \
-      glxheads glxinfo glxpbdemo glxpixmap ; do
-        cp -a src/xdemos/$i $PKG/usr/bin ;
-  done
-)
-  
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-# Compress info files, if any:
-if [ -d $PKG/usr/info ]; then
-  rm -f $PKG/usr/info/dir
-  gzip -9 $PKG/usr/info/*
-fi
-
-mkdir -p $PKG/usr/doc/Mesa-$VERSION/html
-cp -a \
-  docs/COPYING* docs/relnotes-${VERSION}*.html docs/README* docs/GL* \
-  $PKG/usr/doc/Mesa-$VERSION
-cp -a docs/*.html $PKG/usr/doc/Mesa-$VERSION/html
-rm -f $PKG/usr/doc/Mesa-$VERSION/html/relnotes*.html
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/testing/source/mesa/mesa.url b/testing/source/mesa/mesa.url
deleted file mode 100644
index 3f30cc84..00000000
--- a/testing/source/mesa/mesa.url
+++ /dev/null
@@ -1,2 +0,0 @@
-ftp://ftp.freedesktop.org/pub/mesa/
-ftp://ftp.freedesktop.org/pub/mesa/demos/
diff --git a/testing/source/mesa/patches/i915_fragment_shader_disable.patch b/testing/source/mesa/patches/i915_fragment_shader_disable.patch
deleted file mode 100644
index d2aee8e7..00000000
--- a/testing/source/mesa/patches/i915_fragment_shader_disable.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e5a4106be7c8b87821f6b5d21fec99a402825740 Mon Sep 17 00:00:00 2001
-From: Robert Hooker <sarvatt@ubuntu.com>
-Date: Wed, 8 Sep 2010 12:33:09 -0400
-Subject: [PATCH] Revert "i915: Enable ARB_fragment_shader by default."
-
-This reverts commit a58514cc9c5cc5867f9140700462c5ac5749550d.
----
- src/mesa/drivers/dri/intel/intel_screen.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/mesa/drivers/dri/intel/intel_screen.c b/src/mesa/drivers/dri/intel/intel_screen.c
-index 0a542a7..8ae2cd2 100644
---- a/src/mesa/drivers/dri/intel/intel_screen.c
-+++ b/src/mesa/drivers/dri/intel/intel_screen.c
-@@ -70,7 +70,7 @@ PUBLIC const char __driConfigOptions[] =
- 	 DRI_CONF_DESC(en, "Enable early Z in classic mode (unstable, 945-only).")
-       DRI_CONF_OPT_END
- 
--      DRI_CONF_OPT_BEGIN(fragment_shader, bool, true)
-+      DRI_CONF_OPT_BEGIN(fragment_shader, bool, false)
- 	 DRI_CONF_DESC(en, "Enable limited ARB_fragment_shader support on 915/945.")
-       DRI_CONF_OPT_END
- 
--- 
-1.7.2
-
diff --git a/testing/source/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch b/testing/source/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
deleted file mode 100644
index d0ce04d2..00000000
--- a/testing/source/mesa/patches/mesa-7.9-libdrm-2.4.23-nouveau-api.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-diff -ur a/src/gallium/drivers/nouveau/nouveau_screen.c b/src/gallium/drivers/nouveau/nouveau_screen.c
---- a/src/gallium/drivers/nouveau/nouveau_screen.c	2010-10-02 00:51:28.000000000 +0200
-+++ b/src/gallium/drivers/nouveau/nouveau_screen.c	2010-12-11 18:18:20.527000045 +0100
-@@ -236,7 +236,7 @@
- 	int ret;
- 
- 	ret = nouveau_channel_alloc(dev, 0xbeef0201, 0xbeef0202,
--				    &screen->channel);
-+				    512*1024, &screen->channel);
- 	if (ret)
- 		return ret;
- 	screen->device = dev;
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_context.c b/src/mesa/drivers/dri/nouveau/nouveau_context.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_context.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_context.c	2010-12-11 18:18:20.528000045 +0100
-@@ -129,7 +129,7 @@
- 
- 	/* Allocate a hardware channel. */
- 	ret = nouveau_channel_alloc(context_dev(ctx), 0xbeef0201, 0xbeef0202,
--				    &nctx->hw.chan);
-+				    512*1024, &nctx->hw.chan);
- 	if (ret) {
- 		nouveau_error("Error initializing the FIFO.\n");
- 		return GL_FALSE;
-Nur in b/src/mesa/drivers/dri/nouveau: nouveau_context.c.orig.
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_surface.c b/src/mesa/drivers/dri/nouveau/nouveau_surface.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_surface.c	2010-04-27 23:41:21.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_surface.c	2010-12-11 18:09:19.750000046 +0100
-@@ -34,8 +34,8 @@
- 		      unsigned flags, unsigned format,
- 		      unsigned width, unsigned height)
- {
--	unsigned tile_mode, cpp = _mesa_get_format_bytes(format);
--	int ret;
-+	unsigned tile_mode = 0, tile_flags = 0;
-+	int ret, cpp = _mesa_get_format_bytes(format);
- 
- 	nouveau_bo_ref(NULL, &s->bo);
- 
-@@ -51,13 +51,21 @@
- 	if (layout == TILED) {
- 		s->pitch = align(s->pitch, 256);
- 		tile_mode = s->pitch;
-+
-+		if (cpp == 4)
-+			tile_flags = NOUVEAU_BO_TILE_32BPP;
-+		else if (cpp == 2)
-+			tile_flags = NOUVEAU_BO_TILE_16BPP;
-+
-+		if (_mesa_get_format_bits(format, GL_DEPTH_BITS))
-+			tile_flags |= NOUVEAU_BO_TILE_ZETA;
-+
- 	} else {
- 		s->pitch = align(s->pitch, 64);
--		tile_mode = 0;
- 	}
- 
- 	ret = nouveau_bo_new_tile(context_dev(ctx), flags, 0, s->pitch * height,
--				  tile_mode, 0, &s->bo);
-+				  tile_mode, tile_flags, &s->bo);
- 	assert(!ret);
- }
- 
-diff -ur a/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c b/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c
---- a/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nouveau_vbo_t.c	2010-12-11 18:18:20.528000045 +0100
-@@ -32,7 +32,7 @@
- 
- /* Arbitrary pushbuf length we can assume we can get with a single
-  * WAIT_RING. */
--#define PUSHBUF_DWORDS 2048
-+#define PUSHBUF_DWORDS 65536
- 
- /* Functions to set up struct nouveau_array_state from something like
-  * a GL array or index buffer. */
-diff -ur a/src/mesa/drivers/dri/nouveau/nv10_state_fb.c b/src/mesa/drivers/dri/nouveau/nv10_state_fb.c
---- a/src/mesa/drivers/dri/nouveau/nv10_state_fb.c	2010-10-05 03:58:00.000000000 +0200
-+++ b/src/mesa/drivers/dri/nouveau/nv10_state_fb.c	2010-12-11 18:15:17.756000046 +0100
-@@ -64,8 +64,8 @@
- 
- 	if (!nfb->lma_bo || nfb->lma_bo->size != size) {
- 		nouveau_bo_ref(NULL, &nfb->lma_bo);
--		nouveau_bo_new(context_dev(ctx), NOUVEAU_BO_VRAM, 0, size,
--			       &nfb->lma_bo);
-+		nouveau_bo_new_tile(context_dev(ctx), NOUVEAU_BO_VRAM, 0, size,
-+				    0, NOUVEAU_BO_TILE_ZETA, &nfb->lma_bo);
- 	}
- 
- 	nouveau_bo_markl(bctx, celsius, NV17TCL_LMA_DEPTH_BUFFER_OFFSET,
diff --git a/testing/source/mesa/slack-desc b/testing/source/mesa/slack-desc
deleted file mode 100644
index 113964bd..00000000
--- a/testing/source/mesa/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-mesa: mesa (a 3-D graphics library)
-mesa:
-mesa: Mesa is a 3-D graphics library with an API very similar to that of
-mesa: another well-known 3-D graphics library.  :-)  The Mesa libraries are
-mesa: used by X to provide both software and hardware accelerated graphics.
-mesa:
-mesa: Mesa was written by Brian Paul.
-mesa:
-mesa:
-mesa:
-mesa:
diff --git a/testing/source/rp-pppoe/doinst.sh b/testing/source/rp-pppoe/doinst.sh
new file mode 100644
index 00000000..527dfa90
--- /dev/null
+++ b/testing/source/rp-pppoe/doinst.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/ppp/firewall-masq.new
+config etc/ppp/firewall-standalone.new
+config etc/ppp/pppoe-server-options.new
+config etc/ppp/pppoe.conf.new
diff --git a/testing/source/rp-pppoe/rp-pppoe.SlackBuild b/testing/source/rp-pppoe/rp-pppoe.SlackBuild
new file mode 100755
index 00000000..d23e97a0
--- /dev/null
+++ b/testing/source/rp-pppoe/rp-pppoe.SlackBuild
@@ -0,0 +1,93 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=rp-pppoe
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-rp-pppoe
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf rp-pppoe-$VERSION
+tar xvf $CWD/rp-pppoe-$VERSION.tar.?z* || exit 1
+cd rp-pppoe-$VERSION/src || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --enable-plugin=/ppp-2.4.4 \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install docdir=/usr/doc/rp-pppoe-$VERSION DESTDIR=$PKG install || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+( cd $PKG/etc/ppp
+  for config in firewall-masq firewall-standalone pppoe-server-options pppoe.conf ; do
+    mv $config ${config}.new
+  done
+)
+
+gzip -9 $PKG/usr/man/man?/*.?
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/rp-pppoe-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/rp-pppoe/slack-desc b/testing/source/rp-pppoe/slack-desc
new file mode 100644
index 00000000..8aed9d0c
--- /dev/null
+++ b/testing/source/rp-pppoe/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+rp-pppoe: rp-pppoe (Roaring Penguin PPPoE client)
+rp-pppoe:
+rp-pppoe: PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
+rp-pppoe: many ADSL Internet Service Providers. Roaring Penguin has a free
+rp-pppoe: client for Linux systems to connect to PPPoE service providers.
+rp-pppoe:
+rp-pppoe: The client is a user-mode program and does not require any kernel
+rp-pppoe: modifications. It is fully compliant with RFC 2516, the official
+rp-pppoe: PPPoE specification.
+rp-pppoe:
+rp-pppoe:
diff --git a/testing/source/xf86-video-ati/slack-desc b/testing/source/xf86-video-ati/slack-desc
new file mode 100644
index 00000000..7387c43c
--- /dev/null
+++ b/testing/source/xf86-video-ati/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xf86-video-ati: xf86-video-ati (ATI Radeon video driver for the Xorg X server)
+xf86-video-ati:
+xf86-video-ati: xf86-video-ati is part of X11.
+xf86-video-ati:
+xf86-video-ati: For more information about the X.Org Foundation (the providers of the
+xf86-video-ati: X.Org implementation of the X Window System), see their website:
+xf86-video-ati:
+xf86-video-ati: http://www.x.org
+xf86-video-ati:
+xf86-video-ati:
+xf86-video-ati:
diff --git a/testing/source/xf86-video-ati/xf86-video-ati.SlackBuild b/testing/source/xf86-video-ati/xf86-video-ati.SlackBuild
new file mode 100755
index 00000000..f5e727f6
--- /dev/null
+++ b/testing/source/xf86-video-ati/xf86-video-ati.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xf86-video-ati
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/xf86-video-fbdev-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* README* NEWS* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/xf86-video-intel/slack-desc b/testing/source/xf86-video-intel/slack-desc
new file mode 100644
index 00000000..c51417a7
--- /dev/null
+++ b/testing/source/xf86-video-intel/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+xf86-video-intel: xf86-video-intel (X.org graphics driver for Intel graphics)
+xf86-video-intel:
+xf86-video-intel: xf86-video-intel is part of X11.
+xf86-video-intel:
+xf86-video-intel: For more information about the X.Org Foundation (the providers of the
+xf86-video-intel: X.Org implementation of the X Window System), see their website:
+xf86-video-intel:
+xf86-video-intel: http://www.x.org
+xf86-video-intel:
+xf86-video-intel:
+xf86-video-intel:
diff --git a/testing/source/xf86-video-intel/xf86-video-intel.SlackBuild b/testing/source/xf86-video-intel/xf86-video-intel.SlackBuild
new file mode 100755
index 00000000..5498e7fb
--- /dev/null
+++ b/testing/source/xf86-video-intel/xf86-video-intel.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xf86-video-intel
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/xf86-video-fbdev-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* README* NEWS* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/xf86-video-nouveau/arch.use.flags b/testing/source/xf86-video-nouveau/arch.use.flags
deleted file mode 100644
index f28a6cca..00000000
--- a/testing/source/xf86-video-nouveau/arch.use.flags
+++ /dev/null
@@ -1,7 +0,0 @@
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-fi
diff --git a/testing/source/xf86-video-nouveau/configure/xf86-video-nouveau b/testing/source/xf86-video-nouveau/configure/xf86-video-nouveau
deleted file mode 100644
index e050771b..00000000
--- a/testing/source/xf86-video-nouveau/configure/xf86-video-nouveau
+++ /dev/null
@@ -1,11 +0,0 @@
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./autogen.sh \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --infodir=/usr/info \
-  --mandir=/usr/man \
-  --disable-static \
-  --build=$ARCH-slackware-linux
diff --git a/testing/source/xf86-video-nouveau/get-xf86-video-nouveau.sh b/testing/source/xf86-video-nouveau/get-xf86-video-nouveau.sh
deleted file mode 100755
index 72d3efd3..00000000
--- a/testing/source/xf86-video-nouveau/get-xf86-video-nouveau.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-# Pull a stable branch + patches
-BRANCH=master
-
-rm -rf xf86-video-nouveau
-git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
-
-# use master branch
-#( cd xf86-video-nouveau 
-#  git checkout $BRANCH || exit 1
-#)
-
-HEADISAT="$(cat xf86-video-nouveau/.git/packed-refs | grep refs/remotes/origin/$BRANCH | cut -b1-7)"
-# Cleanup.  We're not packing up the whole git repo.
-( cd xf86-video-nouveau && find . -type d -name ".git*" -exec rm -rf {} \; 2> /dev/null )
-DATE=$(date +%Y%m%d)
-mv xf86-video-nouveau xf86-video-nouveau-git_${DATE}_${HEADISAT}
-tar cf xf86-video-nouveau-git_${DATE}_${HEADISAT}.tar xf86-video-nouveau-git_${DATE}_${HEADISAT}
-xz -9 xf86-video-nouveau-git_${DATE}_${HEADISAT}.tar
-rm -rf xf86-video-nouveau-git_${DATE}_${HEADISAT}
-echo
-echo "xf86-video-nouveau branch $BRANCH with HEAD at $HEADISAT packaged as xf86-video-nouveau-git_${DATE}_${HEADISAT}.tar.xz"
-echo
diff --git a/testing/source/xf86-video-nouveau/modularize b/testing/source/xf86-video-nouveau/modularize
deleted file mode 100644
index 47da583f..00000000
--- a/testing/source/xf86-video-nouveau/modularize
+++ /dev/null
@@ -1,293 +0,0 @@
-# If a package is listed here, it will be built apart from the
-# usual "grab bag" package that's made from each source directory.
-
-applewmproto
-appres
-bdftopcf
-beforelight
-bigreqsproto
-bitmap
-compiz
-compositeproto
-constype
-damageproto
-dmxproto
-dri2proto
-editres
-encodings
-evieext
-fixesproto
-font-adobe-100dpi
-font-adobe-75dpi
-font-adobe-utopia-100dpi
-font-adobe-utopia-75dpi
-font-adobe-utopia-type1
-font-alias
-font-arabic-misc
-font-bh-100dpi
-font-bh-75dpi
-font-bh-lucidatypewriter-100dpi
-font-bh-lucidatypewriter-75dpi
-font-bh-ttf
-font-bh-type1
-font-bitstream-100dpi
-font-bitstream-75dpi
-font-bitstream-speedo
-font-bitstream-type1
-font-cronyx-cyrillic
-font-cursor-misc
-font-daewoo-misc
-font-dec-misc
-font-ibm-type1
-font-isas-misc
-font-jis-misc
-font-micro-misc
-font-misc-cyrillic
-font-misc-ethiopic
-font-misc-meltho
-font-misc-misc
-font-mutt-misc
-font-schumacher-misc
-font-screen-cyrillic
-font-sony-misc
-font-sun-misc
-font-util
-font-winitzki-cyrillic
-font-xfree86-type1
-fontcacheproto
-fontsproto
-fonttosfnt
-fslsfonts
-fstobdf
-gccmakedep
-glproto
-iceauth
-ico
-imake
-inputproto
-intel-gpu-tools
-kbproto
-libAppleWM
-libFS
-libICE
-libSM
-libWindowsWM
-libX11
-libXScrnSaver
-libXTrap
-libXau
-libXaw
-libXcomposite
-libXcursor
-libXdamage
-libXdmcp
-libXevie
-libXext
-libXfixes
-libXfont
-libXfontcache
-libXft
-libXi
-libXinerama
-libXmu
-libXp
-libXpm
-libXprintAppUtil
-libXprintUtil
-libXrandr
-libXrender
-libXres
-libXt
-libXtst
-libXv
-libXvMC
-libXxf86dga
-libXxf86misc
-libXxf86vm
-libdmx
-libfontenc
-libpciaccess
-libpthread-stubs
-libxcb
-libxkbfile
-libxkbui
-listres
-lndir
-luit
-makedepend
-mkcfm
-mkcomposecache
-mkfontdir
-mkfontscale
-oclock
-pixman
-printproto
-proxymngr
-randrproto
-recordproto
-rendercheck
-renderproto
-resourceproto
-rgb
-rstart
-scripts
-scrnsaverproto
-sessreg
-setxkbmap
-showfont
-smproxy
-trapproto
-twm
-util-macros
-videoproto
-viewres
-windowswmproto
-x11perf
-xauth
-xbacklight
-xbiff
-xbitmaps
-xcalc
-xcb-proto
-xcb-util
-xclipboard
-xclock
-xcmiscproto
-xcmsdb
-xcompmgr
-xconsole
-xcursor-themes
-xcursorgen
-xdbedizzy
-xditview
-xdm
-xdpyinfo
-xdriinfo
-xedit
-xev
-xextproto
-xeyes
-xf86-input-acecad
-xf86-input-aiptek
-xf86-input-citron
-xf86-input-evdev
-xf86-input-joystick
-xf86-input-keyboard
-xf86-input-mouse
-xf86-input-penmount
-xf86-input-synaptics
-xf86-input-vmmouse
-xf86-input-void
-xf86-input-wacom
-xf86-video-geode
-xf86-video-apm
-xf86-video-ark
-xf86-video-ast
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-xf86-video-i810
-xf86-video-intel
-xf86-video-mach64
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nouveau
-xf86-video-nsc
-xf86-video-nv
-xf86-video-openchrome
-xf86-video-r128
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-xf86-video-sunbw2
-xf86-video-suncg14
-xf86-video-suncg3
-xf86-video-suncg6
-xf86-video-sunffb
-xf86-video-sunleo
-xf86-video-suntcx
-xf86-video-tdfx
-xf86-video-tga
-xf86-video-trident
-xf86-video-tseng
-xf86-video-v4l
-xf86-video-vesa
-xf86-video-vmware
-xf86-video-voodoo
-xf86-video-wsfb
-xf86-video-xgi
-xf86-video-xgixp
-xf86bigfontproto
-xf86dga
-xf86dgaproto
-xf86driproto
-xf86miscproto
-xf86rushproto
-xf86vidmodeproto
-xfd
-xfindproxy
-xfontsel
-xfs
-xfsinfo
-xfwp
-xgamma
-xgc
-xhost
-xineramaproto
-xinit
-xinput
-xkbcomp
-xkbevd
-xkbprint
-xkbutils
-xkeyboard-config
-xkill
-xload
-xlogo
-xlsatoms
-xlsclients
-xlsfonts
-xmag
-xman
-xmessage
-xmh
-xmodmap
-xmore
-xorg-cf-files
-xorg-docs
-xorg-server
-xorg-sgml-doctools
-xphelloworld
-xplsprinters
-xpr
-xprehashprinterlist
-xprop
-xproto
-xproxymanagementprotocol
-xpyb
-xrandr
-xrdb
-xrefresh
-xscope
-xset
-xsetmode
-xsetpointer
-xsetroot
-xsm
-xstdcmap
-xtrans
-xtrap
-xvidtune
-xvinfo
-xwd
-xwininfo
-xwud
diff --git a/testing/source/xf86-video-nouveau/noarch b/testing/source/xf86-video-nouveau/noarch
deleted file mode 100644
index 79eb0e56..00000000
--- a/testing/source/xf86-video-nouveau/noarch
+++ /dev/null
@@ -1,81 +0,0 @@
-# List packages with an $ARCH of "noarch" (i.e. packages
-# that contain no binaries) here:
-bigreqsproto
-compositeproto
-damageproto
-dejavu-ttf
-dmxproto
-encodings
-evieext
-font-adobe-100dpi
-font-adobe-75dpi
-font-adobe-utopia-100dpi
-font-adobe-utopia-75dpi
-font-adobe-utopia-type1
-font-alias
-font-arabic-misc
-font-bh-100dpi
-font-bh-75dpi
-font-bh-lucidatypewriter-100dpi
-font-bh-lucidatypewriter-75dpi
-font-bh-ttf
-font-bh-type1
-font-bitstream-100dpi
-font-bitstream-75dpi
-font-bitstream-speedo
-font-bitstream-type1
-font-cronyx-cyrillic
-font-cursor-misc
-font-daewoo-misc
-font-dec-misc
-font-ibm-type1
-font-isas-misc
-font-jis-misc
-font-micro-misc
-font-misc-cyrillic
-font-misc-ethiopic
-font-misc-meltho
-font-misc-misc
-font-mutt-misc
-font-schumacher-misc
-font-screen-cyrillic
-font-sony-misc
-font-sun-misc
-font-winitzki-cyrillic
-font-xfree86-type1
-fontcacheproto
-fontsproto
-gccmakedep
-glproto
-inputproto
-kbproto
-libpthread-stubs
-mkfontdir
-printproto
-randrproto
-recordproto
-renderproto
-resourceproto
-scripts
-scrnsaverproto
-trapproto
-ttf-indic-fonts
-util-macros
-videoproto
-x11-skel
-xcb-proto
-xcmiscproto
-xcursor-themes
-xf86bigfontproto
-xf86dgaproto
-xf86driproto
-xf86miscproto
-xf86rushproto
-xf86vidmodeproto
-xineramaproto
-xkeyboard-config
-xorg-cf-files
-xorg-docs
-xproto
-xproxymanagementprotocol
-xtrans
diff --git a/testing/source/xf86-video-nouveau/package-blacklist b/testing/source/xf86-video-nouveau/package-blacklist
deleted file mode 100644
index 37762499..00000000
--- a/testing/source/xf86-video-nouveau/package-blacklist
+++ /dev/null
@@ -1,39 +0,0 @@
-# Enter packages to skip (perhaps because they aren't used on
-# this platform) below.  Just the package name -- no version
-# number is needed.
-
-# MacOS related packages:
-applewmproto
-windowswmproto
-libAppleWM
-libWindowsWM
-
-# Sun video cards:
-xf86-video-sunbw2
-xf86-video-suncg14
-xf86-video-suncg3
-xf86-video-suncg6
-xf86-video-sunffb
-xf86-video-sunleo
-xf86-video-suntcx
-
-# Obsolete packages:
-liboldX
-xf86-video-amd
-xf86-video-via
-xkbdata
-xphelloworld
-xrx
-
-# Not applicable to us
-grandr
-constype
-
-# CAREFUL NOT TO "SHIP" THE STUFF BELOW IN THE MAIN X PACKAGES DIR!
-
-# This is probably obsolete, and kills "X -configure" too
-xf86-video-nsc
-
-# We don't want this one, as it causes failure of X with no xorg.conf
-xf86-video-fbdev
-
diff --git a/testing/source/xf86-video-nouveau/slack-desc b/testing/source/xf86-video-nouveau/slack-desc
new file mode 100644
index 00000000..ef207622
--- /dev/null
+++ b/testing/source/xf86-video-nouveau/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+xf86-video-nouveau: xf86-video-nouveau (accelerated open source driver for nVidia cards)
+xf86-video-nouveau:
+xf86-video-nouveau: xf86-video-nouveau is part of X11.
+xf86-video-nouveau:
+xf86-video-nouveau: For more information about the X.Org Foundation (the providers of the
+xf86-video-nouveau: X.Org implementation of the X Window System), see their website:
+xf86-video-nouveau:
+xf86-video-nouveau: http://www.x.org
+xf86-video-nouveau:
+xf86-video-nouveau:
+xf86-video-nouveau:
diff --git a/testing/source/xf86-video-nouveau/slack-desc/xf86-video-nouveau b/testing/source/xf86-video-nouveau/slack-desc/xf86-video-nouveau
deleted file mode 100644
index 8697a60e..00000000
--- a/testing/source/xf86-video-nouveau/slack-desc/xf86-video-nouveau
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-video-nouveau: xf86-video-nouveau
-xf86-video-nouveau:
-xf86-video-nouveau: xf86-video-nouveau is part of X11.
-xf86-video-nouveau:
-xf86-video-nouveau: For more information about the X.Org Foundation (the providers of the
-xf86-video-nouveau: X.Org implementation of the X Window System), see their website:
-xf86-video-nouveau:
-xf86-video-nouveau: http://www.x.org
-xf86-video-nouveau:
-xf86-video-nouveau:
-xf86-video-nouveau:
diff --git a/testing/source/xf86-video-nouveau/x11.SlackBuild b/testing/source/xf86-video-nouveau/x11.SlackBuild
deleted file mode 100755
index ca729708..00000000
--- a/testing/source/xf86-video-nouveau/x11.SlackBuild
+++ /dev/null
@@ -1,364 +0,0 @@
-#!/bin/sh
-# Copyright 2007-2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# To build only a single package group, specify it as $1, like:
-# ./x11.SlackBuild lib
-# To build only a single package, specify both the source directory
-# and the name of the package, like:
-# ./x11.SlackBuild lib libX11
-
-pkgbase() {
-  PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev)
-  case $PKGEXT in
-  'gz' )
-    PKGRETURN=$(basename $1 .tar.gz)
-    ;;
-  'bz2' )
-    PKGRETURN=$(basename $1 .tar.bz2)
-    ;;
-  'lzma' )
-    PKGRETURN=$(basename $1 .tar.lzma)
-    ;;
-  'xz' )
-    PKGRETURN=$(basename $1 .tar.xz)
-    ;;
-  *)
-    PKGRETURN=$(basename $1)
-    ;;
-  esac
-  echo $PKGRETURN
-}
-
-# Set initial variables:
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# A lot of this stuff just controls the package names this time:
-VERSION=${VERSION:-7.5}
-BUILD=${BUILD:-1}
-PKGARCH=$ARCH
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "x86_64" ]; then
-  LIBDIRSUFFIX="64"
-else
-  LIBDIRSUFFIX=""
-fi
-
-# Set up a few useful functions:
-
-fix_perms() {
-  chown -R root:root .
-  find . \
-   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-   -exec chmod 755 {} \; -o \
-   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-   -exec chmod 644 {} \;
-}
-
-process_man_pages() {
-  # Compress and if needed symlink the man pages:
-  if [ -d usr/man ]; then
-    ( cd usr/man
-      for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.*
-      )
-      done
-    )
-  fi
-}
-
-process_info_pages() {
-  # Compress info pages and purge "dir" file from the package:
-  if [ -d usr/info ]; then
-    ( cd usr/info
-      rm -f dir
-      gzip -9 *
-    )
-  fi
-}
-
-no_usr_share_doc() {
-  # If there are docs, move them:
-  if [ -d usr/share/doc ]; then
-    mkdir -p usr/doc
-    mv usr/share/doc/* usr/doc
-    rmdir usr/share/doc
-  fi
-}
-
-# Set the compile options for the $ARCH being used:
-. $CWD/arch.use.flags
-
-SLACK_X_BUILD_DIR=$TMP/x11-build
-mkdir -p $SLACK_X_BUILD_DIR
-
-# Better have some binaries installed first, as this may not be
-# in the "magic order".  I built mine by hand through trial-and-error
-# before getting this script to work.  It wasn't that hard...  I think.  ;-)
-( cd src
-  for x_source_dir in proto data util xcb lib app doc driver font xserver ; do
-    # See if $1 is a source directory like "lib":
-    if [ ! -z "$1" ]; then
-      if [ ! "$1" = "${x_source_dir}" ]; then
-        continue
-      fi
-    fi
-    PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
-    rm -rf $PKG
-    mkdir -p $PKG
-    ( cd $x_source_dir
-      for x_pkg in *.tar.?z* ; do
-        # Reset $PKGARCH to its initial value:
-        PKGARCH=$ARCH
-        PKGNAME=$(echo $x_pkg | rev | cut -f 2- -d - | rev)
-        # Perhaps $PKGARCH should be something different:
-        if grep -wq "^$PKGNAME" ${CWD}/noarch ; then
-          PKGARCH=noarch
-        fi 
-        if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then
-          continue
-        fi
-        cd $SLACK_X_BUILD_DIR
-        # If $2 is set, we only want to build one package:
-        if [ ! -z "$2" ]; then
-          if [ "$2" = "$PKGNAME" ]; then
-            # Set $PKG to a private dir for the modular package build:
-            PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
-            rm -rf $PKG
-            mkdir -p $PKG
-          else
-            continue
-          fi
-        else
-          echo
-          echo "Building from source ${x_pkg}"
-          echo
-        fi
-        if grep -wq "^$PKGNAME" ${CWD}/modularize ; then
-          # Set $PKG to a private dir for the modular package build:
-          PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
-          rm -rf $PKG
-          mkdir -p $PKG
-        fi
-
-        # Let's figure out the version number on the modular package:
-        MODULAR_PACKAGE_VERSION=$(echo $x_pkg | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
-
-        rm -rf $(pkgbase $x_pkg)
-        tar xf $CWD/src/${x_source_dir}/${x_pkg} || exit 1
-        cd $(pkgbase $x_pkg) || exit 1
-
-        fix_perms
-
-        # If any patches are needed, call this script to apply them:
-        if [ -r $CWD/patch/${PKGNAME}.patch ]; then
-          . $CWD/patch/${PKGNAME}.patch
-        fi
-
-        # I heard somewhere that -O2 breaks some chipset or another.  If you encounter
-        # problems, please contact volkerdi@slackware.com.  Thanks! :-)
-
-        # ./configure, using custom configure script if needed:
-        if [ -r $CWD/configure/${PKGNAME} ]; then
-          . $CWD/configure/${PKGNAME}
-        else
-          # This is the default configure script:
-          . $CWD/configure/configure
-        fi
-
-        if ! make $NUMJOBS ; then
-          touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed
-          continue
-        fi
-
-        make install DESTDIR=$PKG
-
-        mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
-        cp -a \
-          AUTHORS* COPYING* INSTALL* README* NEWS* TODO* \
-          $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
-
-        # If there's a ChangeLog, installing at least part of the recent history
-        # is useful, but don't let it get totally out of control:
-        if [ -r ChangeLog ]; then
-          DOCSDIR=$(echo $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION)
-          cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-          touch -r ChangeLog $DOCSDIR/ChangeLog
-        fi
-
-        # Get rid of zero-length junk files:
-        find $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION -type f -size 0 -exec rm --verbose "{}" \;
-        rmdir --verbose $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION 2> /dev/null
-   
-        # Strip binaries:
-        ( cd $PKG
-          find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-          find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-          find . | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
-        )
-
-        # If there's any special post-install things to do, do them:
-        if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then
-          RUNSCRIPT=$(mktemp -p $TMP) || exit 1
-          cat $CWD/post-install/${PKGNAME}.post-install \
-            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
-          . $RUNSCRIPT
-          rm -f $RUNSCRIPT
-        fi
-
-        # If this package requires some doinst.sh material, add it here:
-        if [ -r $CWD/doinst.sh/${PKGNAME} ]; then
-          mkdir -p $PKG/install
-          cat $CWD/doinst.sh/${PKGNAME} \
-            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
-            >> $PKG/install/doinst.sh
-        fi
-
-        # If this is a modular package, build it here:
-        if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then
-          cd $PKG
-          process_man_pages
-          process_info_pages
-          no_usr_share_doc          
-          mkdir -p $PKG/install
-          if [ -r $CWD/slack-desc/${PKGNAME} ]; then
-            cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc
-          else
-            touch $PKG/install/slack-desc-missing
-          fi
-          if [ -r $CWD/build/${PKGNAME} ]; then
-            MODBUILD=$(cat $CWD/build/${PKGNAME})
-          else
-            MODBUILD=$BUILD
-          fi
-          if [ -r $CWD/makepkg/${PKGNAME} ]; then
-            BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
-          else
-            /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
-          fi
-        fi
-
-        # Reset $PKG to assume we're building the whole source dir:
-        PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
-
-      done
-
-      # Nothing here?  Must have been fully modular. :-)
-      if [ ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -a \
-        ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then
-        continue
-      fi
-
-      # Build an "x11-<sourcedir>" package for anything that wasn't built modular:
-      # It's safer to consider these to have binaries in them. ;-)
-      PKGARCH=$ARCH
-      cd $PKG
-      process_man_pages
-      process_info_pages
-      no_usr_share_doc
-      # If there are post-install things to do for the combined package,
-      # we do them here.  This could be used for things like making a
-      # VERSION number for a combined package.  :-)
-      if [ -r $CWD/post-install/x11-${x_source_dir}.post-install ]; then
-        RUNSCRIPT=$(mktemp -p $TMP) || exit 1
-        cat $CWD/post-install/x11-${x_source_dir}.post-install \
-          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
-        . $RUNSCRIPT
-        rm -f $RUNSCRIPT
-      fi
-      mkdir -p $PKG/install
-      if [ -r $CWD/slack-desc/x11-${x_source_dir} ]; then
-        cat $CWD/slack-desc/x11-${x_source_dir} > $PKG/install/slack-desc
-      else
-        touch $PKG/install/slack-desc-missing
-      fi
-      if [ -r $CWD/doinst.sh/x11-${x_source_dir} ]; then
-        cat $CWD/doinst.sh/x11-${x_source_dir} \
-          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
-          >> $PKG/install/doinst.sh
-      fi
-      if [ -r $CWD/build/x11-${PKGNAME} ]; then
-        SRCDIRBUILD=$(cat $CWD/build/x11-${PKGNAME})
-      else
-        SRCDIRBUILD=$BUILD
-      fi
-      if [ -r $CWD/makepkg/${PKGNAME} ]; then
-        BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
-      else
-        /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
-      fi
-    )
-  done
-)
-
-exit 0
-
-# I don't think I'll be using the following stuff, since I went for the latest in
-# "individual", rather than a release.  That was mostly because version 7.1 depends
-# on a version of Mesa that won't build against kernel headers this new (&etc.).
-
-# If environment variable "REFRESH" is exported, start by refreshing the source tree:
-# export REFRESH yes
-if [ ! -z "$REFRESH" ]; then
-  # Only works once, unless you uncomment above.
-  unset REFRESH
-  ( cd patches
-    lftp -c \
-    "lftp ftp://ftp.x.org:/pub/X11R7.1/patches
-     mirror --delete --dereference .
-     exit"
-    chmod 644 *
-  )
-  ( cd src
-    mkdir -p update everything
-    for dir in app data deprecated doc driver extras font lib proto util xserver ; do
-      # We won't really download "update", as problems ensue.  Plus, --dereference is
-      # bringing us updated files when needed, so it's redundant (like "everything").
-      if [ ! -d $dir ]; then
-        mkdir $dir
-      fi
-      ( cd $dir
-        lftp -c \
-        "lftp ftp://ftp.x.org:/pub/X11R7.1/src/$dir
-         mirror -c --delete --dereference --include-glob "*.tar.bz2" .
-         exit"
-        chmod 644 *
-      )
-    done
-  )
-fi
-
diff --git a/testing/source/xf86-video-nouveau/xf86-video-nouveau.SlackBuild b/testing/source/xf86-video-nouveau/xf86-video-nouveau.SlackBuild
index 70f93a30..393b7bfd 100755
--- a/testing/source/xf86-video-nouveau/xf86-video-nouveau.SlackBuild
+++ b/testing/source/xf86-video-nouveau/xf86-video-nouveau.SlackBuild
@@ -1 +1,135 @@
-./x11.SlackBuild driver xf86-video-nouveau
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xf86-video-nouveau
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i486 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/xf86-video-fbdev-$VERSION \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  COPYING* README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/usb-and-pxe-installers/usbimg2disk.sh b/usb-and-pxe-installers/usbimg2disk.sh
index f806c5ed..df3f574f 100644
--- a/usb-and-pxe-installers/usbimg2disk.sh
+++ b/usb-and-pxe-installers/usbimg2disk.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
-# $Id: usbimg2disk.sh,v 1.20 2011/04/16 19:11:27 eha Exp eha $
+# $Id: usbimg2disk.sh,v 1.23 2012/09/03 20:52:31 eha Exp eha $
 #
-# Copyright 2009, 2010, 2011  Eric Hameleers, Eindhoven, NL
+# Copyright 2009, 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -38,7 +38,7 @@ cleanup() {
   [ ! -z "${MNTDIR2}" ] && ( umount -f ${MNTDIR2} ; rmdir $MNTDIR2 )
   [ ! -z "${MNTDIR3}" ] && rm -rf ${MNTDIR3} || true
 }
-trap "echo \"*** $0 FAILED at line $LINENO ***\"; cleanup; exit 1" ERR INT TERM
+trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM
 
 showhelp() {
   echo "# "
@@ -234,7 +234,7 @@ else
 fi
 
 # Prepare the environment:
-MININSFREE=2000               # minimum in MB required for a Slackware tree
+MININSFREE=2200               # minimum in MB required for a Slackware tree
 UNATTENDED=${UNATTENDED:-0}   # unattended means: never ask questions.
 REFORMAT=${REFORMAT:-0}       # do not try to reformat by default
 LOGFILE=${LOGFILE:-/dev/null} # silence by default
@@ -286,18 +286,32 @@ if mount | grep -q $TARGETPART ; then
   exit 1
 fi
 
-# Check for prerequisites:
+# Do not croak if we have a Slackware tree without sources:
+if [ ! $(readlink -f ${REPOSROOT}/extra/java ) ]; then
+   EXCLUDES="${EXCLUDES} --exclude=extra/java"
+fi
+
+# Check for prerequisites which may not always be installed:
+MISSBIN=0
 MBRBIN="/usr/lib/syslinux/mbr.bin"
 if [ ! -r $MBRBIN ]; then MBRBIN="/usr/share/syslinux/mbr.bin"; fi
 if [ ! -r $MBRBIN -o ! -x /usr/bin/syslinux ]; then
   echo "*** This script requires that the 'syslinux' package is installed!"
-  exit 1
+  MISSBIN=1
 fi
-
 if [ ! -x /usr/bin/mtools ]; then
   echo "*** This script requires that the 'floppy' (mtools) package is installed!"
-  exit 1
+  MISSBIN=1
+fi
+if [ ! -x /sbin/mkdosfs ]; then
+  echo "*** This script requires that the 'dosfstools' package is installed!"
+  MISSBIN=1
+fi
+if [ ! -x /bin/cpio ]; then
+  echo "*** This script requires that the 'cpio' package is installed!"
+  MISSBIN=1
 fi
+if [ $MISSBIN -eq 1 ]; then exit 1 ; fi
 
 # Show the USB device's information to the user:
 if [ $UNATTENDED -eq 0 ]; then
@@ -338,6 +352,7 @@ else
   # Prepare for using mlabel to change the FAT label:
   MTOOLSRCFILE=$(mktemp -p /tmp -t mtoolsrc.XXXXXX)
   echo "drive s: file=\"$TARGETPART\"" > $MTOOLSRCFILE
+  echo "mtools_skip_check=1" >> $MTOOLSRCFILE
 
   if [ -n "$CUSTOMLABEL" ]; then
     # User gave us a FAT label to use, so we will force that upon the drive: